Science.gov

Sample records for affect energy consumption

  1. Factors affecting the energy consumption of two refrigerator-freezers

    SciTech Connect

    Kao, J.Y.; Kelley, G.E.

    1996-12-31

    Two refrigerator-freezers, one with a top-mounted freezer and one with side-by-side doors, were tested in the laboratory to determine the sensitivity of their energy consumption to various operational factors. Room temperature, room humidity, door openings, and the setting of the anti-sweat heater switch were the factors examined. The results indicated that the room temperature and door openings had a significantly greater effect on energy consumption than the other two factors. More detailed tests were then performed under different room temperature and door-opening combinations. The relationship of door openings and the equivalent test room temperature was established. Finally, the effect on energy of different temperature settings was studied. Test results are presented and discussed.

  2. Socioeconomic Factors Affecting Household Energy Consumption in Qom, Iran

    NASA Astrophysics Data System (ADS)

    Mehrzad, Ebrahimi; Masoud, Alizadeh; Mansour, Ebrahimi

    Petrol is heavily subsidized in Iran which has led both to very high consumption levels and a big smuggling problem as petrol is transported out of Iran's border areas for re-sale in neighboring countries, where petrol prices are much higher. Also, a shortage of refineries combined with wasteful consumption means that Iran regularly imports petrol despite being one of the world's biggest oil producers. To look at the different variables contributing to wasteful consumption of fuel in Iran and the effect of governmental gradual increase of fuel prices, this study questioned 600 family warden views in Qom, Iran. The results showed that more than two third of samples have heard or read at least one news about energy saving and quoted TV as main source of their information while 55% mentioned all fossils resources would be finish in near future and urged optimum energy consumption as the best way to tackle energy crisis (82%), with 85% asked for more media propagation to change wrong cultural behaviors in Qom. Nearly half of the people said that governmental plan to increase domestic price of high octane and regular gasoline annually had little or no effect on fuel consumption and majority of them mentioned cultural changes as the best tools and nearly the same rate were worried about air pollution as the immediate result of uncontrolled fuel consumption in Qom. The results also showed that with increase in each year education of family warden, decreases fuel expenses 11.2% in hot seasons and 1240000 Iranian Rials (IR-R) in cold seasons while increase in family members' size adds 288660 (IR-R) per member to base family size (2) and for each member of family which works outside the house, family energy expenses increase 234470 IR-R. And finally the results showed fuel (or energy) expenses in cold months in Qom is higher than other months and family warden education showed more effect to reduce those expenses during mild months but less during hot months. Therefore it is

  3. Energy-consumption modelling

    SciTech Connect

    Reiter, E.R.

    1980-01-01

    A highly sophisticated and accurate approach is described to compute on an hourly or daily basis the energy consumption for space heating by individual buildings, urban sectors, and whole cities. The need for models and specifically weather-sensitive models, composite models, and space-heating models are discussed. Development of the Colorado State University Model, based on heat-transfer equations and on a heuristic, adaptive, self-organizing computation learning approach, is described. Results of modeling energy consumption by the city of Minneapolis and Cheyenne are given. Some data on energy consumption in individual buildings are included.

  4. Energy and resource consumption

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The present and projected energy requirements for the United States are discussed. The energy consumption and demand sectors are divided into the categories: residential and commercial, transportation, and industrial and electrical generation (utilities). All sectors except electrical generation use varying amounts of fossile fuel resources for non-energy purposes. The highest percentage of non-energy use by sector is industrial with 71.3 percent. The household and commercial sector uses 28.4 percent, and transportation about 0.3 percent. Graphs are developed to project fossil fuel demands for non-energy purposes and the perdentage of the total fossil fuel used for non-energy needs.

  5. Does low-energy sweetener consumption affect energy intake and body weight? A systematic review, including meta-analyses, of the evidence from human and animal studies

    PubMed Central

    Rogers, P J; Hogenkamp, P S; de Graaf, C; Higgs, S; Lluch, A; Ness, A R; Penfold, C; Perry, R; Putz, P; Yeomans, M R; Mela, D J

    2016-01-01

    By reducing energy density, low-energy sweeteners (LES) might be expected to reduce energy intake (EI) and body weight (BW). To assess the totality of the evidence testing the null hypothesis that LES exposure (versus sugars or unsweetened alternatives) has no effect on EI or BW, we conducted a systematic review of relevant studies in animals and humans consuming LES with ad libitum access to food energy. In 62 of 90 animal studies exposure to LES did not affect or decreased BW. Of 28 reporting increased BW, 19 compared LES with glucose exposure using a specific ‘learning' paradigm. Twelve prospective cohort studies in humans reported inconsistent associations between LES use and body mass index (−0.002 kg m−2 per year, 95% confidence interval (CI) −0.009 to 0.005). Meta-analysis of short-term randomized controlled trials (129 comparisons) showed reduced total EI for LES versus sugar-sweetened food or beverage consumption before an ad libitum meal (−94 kcal, 95% CI −122 to −66), with no difference versus water (−2 kcal, 95% CI −30 to 26). This was consistent with EI results from sustained intervention randomized controlled trials (10 comparisons). Meta-analysis of sustained intervention randomized controlled trials (4 weeks to 40 months) showed that consumption of LES versus sugar led to relatively reduced BW (nine comparisons; −1.35 kg, 95% CI –2.28 to −0.42), and a similar relative reduction in BW versus water (three comparisons; −1.24 kg, 95% CI –2.22 to −0.26). Most animal studies did not mimic LES consumption by humans, and reverse causation may influence the results of prospective cohort studies. The preponderance of evidence from all human randomized controlled trials indicates that LES do not increase EI or BW, whether compared with caloric or non-caloric (for example, water) control conditions. Overall, the balance of evidence indicates that use of LES in place of sugar, in children and adults, leads to reduced EI

  6. Does low-energy sweetener consumption affect energy intake and body weight? A systematic review, including meta-analyses, of the evidence from human and animal studies.

    PubMed

    Rogers, P J; Hogenkamp, P S; de Graaf, C; Higgs, S; Lluch, A; Ness, A R; Penfold, C; Perry, R; Putz, P; Yeomans, M R; Mela, D J

    2016-03-01

    By reducing energy density, low-energy sweeteners (LES) might be expected to reduce energy intake (EI) and body weight (BW). To assess the totality of the evidence testing the null hypothesis that LES exposure (versus sugars or unsweetened alternatives) has no effect on EI or BW, we conducted a systematic review of relevant studies in animals and humans consuming LES with ad libitum access to food energy. In 62 of 90 animal studies exposure to LES did not affect or decreased BW. Of 28 reporting increased BW, 19 compared LES with glucose exposure using a specific 'learning' paradigm. Twelve prospective cohort studies in humans reported inconsistent associations between LES use and body mass index (-0.002 kg m(-)(2) per year, 95% confidence interval (CI) -0.009 to 0.005). Meta-analysis of short-term randomized controlled trials (129 comparisons) showed reduced total EI for LES versus sugar-sweetened food or beverage consumption before an ad libitum meal (-94 kcal, 95% CI -122 to -66), with no difference versus water (-2 kcal, 95% CI -30 to 26). This was consistent with EI results from sustained intervention randomized controlled trials (10 comparisons). Meta-analysis of sustained intervention randomized controlled trials (4 weeks to 40 months) showed that consumption of LES versus sugar led to relatively reduced BW (nine comparisons; -1.35 kg, 95% CI -2.28 to -0.42), and a similar relative reduction in BW versus water (three comparisons; -1.24 kg, 95% CI -2.22 to -0.26). Most animal studies did not mimic LES consumption by humans, and reverse causation may influence the results of prospective cohort studies. The preponderance of evidence from all human randomized controlled trials indicates that LES do not increase EI or BW, whether compared with caloric or non-caloric (for example, water) control conditions. Overall, the balance of evidence indicates that use of LES in place of sugar, in children and adults, leads to reduced EI and BW, and possibly also

  7. Energy consumption in thermomechanical pulping

    SciTech Connect

    Marton, R.; Tsujimoto, N.; Eskelinen, E.

    1981-08-01

    Various components of refining energy were determined experimentally and compared with those calculated on the basis of the dimensions of morphological elements of wood. The experimentally determined fiberization energy of spruce was 6 to 60 times larger than the calculated value and that of birch 3 to 15 times larger. The energy consumed in reducing the Canadian standard freeness of isolated fibers from 500 to 150 ml was found to be approximately 1/3 of the total fiber development energy for both spruce and birch TMP. Chip size affected the refining energy consumption; the total energy dropped by approximately 30% when chip size was reduced from 16 mm to 3 mm in the case of spruce and approximately 40% for birch. 6 refs.

  8. Manufacturing consumption of energy 1991

    SciTech Connect

    Not Available

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  9. Adolescent intake of caffeinated energy drinks does not affect adult alcohol consumption in C57BL/6 and BALB/c mice.

    PubMed

    Robins, Meridith T; DeFriel, Julia N; van Rijn, Richard M

    2016-08-01

    The rise in marketing and mass consumption of energy drink products by adolescents poses a largely unknown risk on adolescent development and drug reward. Yet, with increasing reports of acute health issues present in young adults who ingest large quantities of energy drinks alone or in combination with alcohol, the need to elucidate these potential risks is pressing. Energy drinks contain high levels of caffeine and sucrose; therefore, exposure to energy drinks may lead to changes in drug-related behaviors since caffeine and sucrose consumption activates similar brain pathways engaged by substances of abuse. With a recent study observing that adolescent caffeine consumption increased cocaine sensitivity, we sought to investigate how prolonged energy drink exposure in adolescence alters alcohol use and preference in adulthood. To do so, we utilized three different energy drink exposure paradigms and two strains of male mice (C57BL/6 and BALB/c) to monitor the effect of caffeine exposure via energy drinks in adolescence on adult alcohol intake. These paradigms included two models of volitional consumption of energy drinks or energy drink-like substances and one model of forced consumption of sucrose solutions with different caffeine concentrations. Following adolescent exposure to these solutions, alcohol intake was monitored in a limited-access, two-bottle choice between water and increasing concentrations of alcohol during adulthood. In none of the three models or two strains of mice did we observe that adolescent 'energy drink' consumption or exposure was correlated with changes in adult alcohol intake or preference. While our current preclinical results suggest that exposure to large amounts of caffeine does not alter future alcohol intake, differences in caffeine metabolism between mice and humans need to be considered before translating these results to humans. PMID:27565749

  10. Adolescent intake of caffeinated energy drinks does not affect adult alcohol consumption in C57BL/6 and BALB/c mice.

    PubMed

    Robins, Meridith T; DeFriel, Julia N; van Rijn, Richard M

    2016-08-01

    The rise in marketing and mass consumption of energy drink products by adolescents poses a largely unknown risk on adolescent development and drug reward. Yet, with increasing reports of acute health issues present in young adults who ingest large quantities of energy drinks alone or in combination with alcohol, the need to elucidate these potential risks is pressing. Energy drinks contain high levels of caffeine and sucrose; therefore, exposure to energy drinks may lead to changes in drug-related behaviors since caffeine and sucrose consumption activates similar brain pathways engaged by substances of abuse. With a recent study observing that adolescent caffeine consumption increased cocaine sensitivity, we sought to investigate how prolonged energy drink exposure in adolescence alters alcohol use and preference in adulthood. To do so, we utilized three different energy drink exposure paradigms and two strains of male mice (C57BL/6 and BALB/c) to monitor the effect of caffeine exposure via energy drinks in adolescence on adult alcohol intake. These paradigms included two models of volitional consumption of energy drinks or energy drink-like substances and one model of forced consumption of sucrose solutions with different caffeine concentrations. Following adolescent exposure to these solutions, alcohol intake was monitored in a limited-access, two-bottle choice between water and increasing concentrations of alcohol during adulthood. In none of the three models or two strains of mice did we observe that adolescent 'energy drink' consumption or exposure was correlated with changes in adult alcohol intake or preference. While our current preclinical results suggest that exposure to large amounts of caffeine does not alter future alcohol intake, differences in caffeine metabolism between mice and humans need to be considered before translating these results to humans.

  11. Building Energy Consumption Analysis

    2005-03-02

    DOE2.1E-121SUNOS is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS).« less

  12. Building Energy Consumption Analysis

    2005-01-24

    DOE2.1E-121 is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS). DOE2.1E-121 contains modifications to DOE2.1E which allows 1000 zones to be modeled.« less

  13. Community Energy Consumption Analysis

    1992-02-21

    The TDIST3 program performs an analysis of large integrated community total energy systems (TES) supplying thermal and electrical energy from one or more power stations. The program models the time-dependent energy demands of a group of representative building types, distributes the thermal demands within a thermal utility system (TUS), simulates the dynamic response of a group of power stations in meeting the TUS demands, and designs an optimal base-loaded (electrically) power plant and thermal energymore » storage reservoir combination. The capital cost of the TES is evaluated. The program was developed primarily to analyze thermal utility systems supplied with high temperature water (HTW) from more than one power plant. The TUS consists of a transmission loop and secondary loops with a heat exchanger linking each secondary loop to the transmission loop. The power stations electrical output supplies all community buildings and the HTW supplies the thermal demand of the buildings connected through the TUS, a piping network. Basic components of the TES model are one or more power stations connected to the transmission loop. These may be dual-purpose, producing electricity and HTW, or just heating plants producing HTW. A thermal storage reservoir is located at one power station. The secondary loops may have heating plants connected to them. The transmission loop delivers HTW to local districts; the secondary loops deliver the energy to the individual buildings in a district.« less

  14. Manufacturing consumption of energy 1994

    SciTech Connect

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  15. Household vehicles energy consumption 1994

    SciTech Connect

    1997-08-01

    Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

  16. State energy data report 1992: Consumption estimates

    SciTech Connect

    Not Available

    1994-05-01

    This is a report of energy consumption by state for the years 1960 to 1992. The report contains summaries of energy consumption for the US and by state, consumption by source, comparisons to other energy use reports, consumption by energy use sector, and describes the estimation methodologies used in the preparation of the report. Some years are not listed specifically although they are included in the summary of data.

  17. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOEpatents

    Donnelly, Matthew K.; Chassin, David P.; Dagle, Jeffery E.; Kintner-Meyer, Michael; Winiarski, David W.; Pratt, Robert G.; Boberly-Bartis, Anne Marie

    2008-09-02

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  18. Electrical appliance energy consumption control methods and electrical energy consumption systems

    DOEpatents

    Donnelly, Matthew K.; Chassin, David P.; Dagle, Jeffery E.; Kintner-Meyer, Michael; Winiarski, David W.; Pratt, Robert G.; Boberly-Bartis, Anne Marie

    2006-03-07

    Electrical appliance energy consumption control methods and electrical energy consumption systems are described. In one aspect, an electrical appliance energy consumption control method includes providing an electrical appliance coupled with a power distribution system, receiving electrical energy within the appliance from the power distribution system, consuming the received electrical energy using a plurality of loads of the appliance, monitoring electrical energy of the power distribution system, and adjusting an amount of consumption of the received electrical energy via one of the loads of the appliance from an initial level of consumption to an other level of consumption different than the initial level of consumption responsive to the monitoring.

  19. Household energy consumption and expenditures 1993

    SciTech Connect

    1995-10-05

    This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

  20. Fundamental principles of energy consumption for gene expression.

    PubMed

    Huang, Lifang; Yuan, Zhanjiang; Yu, Jianshe; Zhou, Tianshou

    2015-12-01

    How energy is consumed in gene expression is largely unknown mainly due to complexity of non-equilibrium mechanisms affecting expression levels. Here, by analyzing a representative gene model that considers complexity of gene expression, we show that negative feedback increases energy consumption but positive feedback has an opposite effect; promoter leakage always reduces energy consumption; generating more bursts needs to consume more energy; and the speed of promoter switching is at the cost of energy consumption. We also find that the relationship between energy consumption and expression noise is multi-mode, depending on both the type of feedback and the speed of promoter switching. Altogether, these results constitute fundamental principles of energy consumption for gene expression, which lay a foundation for designing biologically reasonable gene modules. In addition, we discuss possible biological implications of these principles by combining experimental facts.

  1. Household vehicles energy consumption 1991

    SciTech Connect

    Not Available

    1993-12-09

    The purpose of this report is to provide information on the use of energy in residential vehicles in the 50 States and the District of Columbia. Included are data about: the number and type of vehicles in the residential sector, the characteristics of those vehicles, the total annual Vehicle Miles Traveled (VMT), the per household and per vehicle VMT, the vehicle fuel consumption and expenditures, and vehicle fuel efficiencies. The data for this report are based on the household telephone interviews from the 1991 RTECS, conducted during 1991 and early 1992. The 1991 RTECS represents 94.6 million households, of which 84.6 million own or have access to 151.2 million household motor vehicles in the 50 States and the District of Columbia.

  2. State energy data report 1993: Consumption estimates

    SciTech Connect

    1995-07-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

  3. State Energy Data Report, 1991: Consumption estimates

    SciTech Connect

    Not Available

    1993-05-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA`s energy models.

  4. Specific energy consumption of membrane bioreactor (MBR) for sewage treatment.

    PubMed

    Krzeminski, Pawel; van der Graaf, Jaap H J M; van Lier, Jules B

    2012-01-01

    This paper provides an overview of current electric energy consumption of full-scale municipal MBR installations based on literature review and case studies. Energy requirements of several MBRs were linked to operational parameters and reactor performance. Total and specific energy consumption data were analysed on a long-term basis with special attention given to treated flow, design capacity, membrane area and effluent quality. The specific energy consumption of an MBR system is dependent on many factors, such as system design and layout, volume of treated flow, membrane utilization and operational strategy. Operation at optimal flow conditions results in a low specific energy consumption and energy efficient process. Energy consumption of membrane related modules was in the range of 0.5-0.7 kWh/m(3) and specific energy consumption for membrane aeration in flat sheet (FS) was 33-37% higher than in a hollow fibre (HF) system. Aeration is a major energy consumer, often exceeding 50% share of total energy consumption. In consequence, coarse bubble aeration applied for continuous membrane cleaning remains the main target for energy saving actions. Also, a certain potential for energy optimization without immediate danger of affecting the quality of the produced effluent was observed.

  5. Global energy consumption for direct water use

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Hejazi, M. I.; Kim, S. H.; Kyle, P.; Davies, E. G.; Miralles, D. G.; Teuling, R.; He, Y.; Niyogi, D.

    2015-12-01

    Despite significant efforts to quantify the mutual inter-dependence of the water and energy sectors, global energy for water (EFW) remains poorly understood, resulting in biases in energy accounting that directly affect water and energy management and policy. We firstly evaluate the global energy consumption for direct water use from 1973 to 2012 with sectoral, regional and process-level details. Over the 40-year period, we detected multiple shifts in EFW by county and region. For example, we find that India, the Middle East and China have surpassed the United States as the three largest consumers of EFW since 2003, mostly because of rapid growth in groundwater-based irrigation, desalination, and industrial and municipal water use, respectively. Globally, EFW accounts for 1-3% of total primary energy consumption in 2010, of which 52% is surface water, 36% is groundwater, and 12% is non-fresh water. The sectoral allocation of EFW includes municipal (45%), industrial (29%), and agricultural use (26%), and process-level contributions are from source/conveyance (41%), water purification (19%), water distribution (13%) and wastewater treatment (22%). Our evaluation suggests that the EFW may increase in importance in the future due to growth in population and income, and depletion of surface and shallow aquifer water resources in water-scarce regions. We are incorporating this element into an integrated assessment model (IAM) and linking it back to energy balance within that IAM. By doing this, we will then explore the impacts of EFW on the global energy market (e.g., changes in the share of groundwater use and desalination), and the uncertainty of future EFW under different shared social pathway (SSP) and representative concentration pathway (RCP) scenarios, and consequences on the emission of greenhouse gases as well. We expect these EFW induced impacts will be considerable, and will then have significant implications for adaptive management and policy making.

  6. State energy data report 1994: Consumption estimates

    SciTech Connect

    1996-10-01

    This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

  7. State energy data report 1996: Consumption estimates

    SciTech Connect

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  8. Residential Energy Consumption Survey: Quality Profile

    SciTech Connect

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  9. Adolescent energy drink consumption: An Australian perspective.

    PubMed

    Costa, Beth M; Hayley, Alexa; Miller, Peter

    2016-10-01

    Caffeinated Energy Drinks (EDs) are not recommended for consumption by children, yet there is a lack of age-specific recommendations and restrictions on the marketing and sale of EDs. EDs are increasingly popular among adolescents despite growing evidence of their negative health effects. In the current study we examined ED consumption patterns among 399 Australian adolescents aged 12-18 years. Participants completed a self-report survey of consumption patterns, physiological symptoms, and awareness of current ED consumption guidelines. Results indicated that ED consumption was common among the sample; 56% reported lifetime ED consumption, with initial consumption at mean age 10 (SD = 2.97). Twenty-eight percent of the sample consumed EDs at least monthly, 36% had exceeded the recommended two standard EDs/day, and 56% of consumers had experienced negative physiological health effects following ED consumption. The maximum number of EDs/day considered appropriate for children, adolescents, and adults varied, indicating a lack of awareness of current consumption recommendations. These findings add to the growing body of international evidence of adolescent ED consumption, and the detrimental impact of EDs to adolescent health. Enforced regulation and restriction of EDs for children's and adolescents' consumption is urgently needed in addition to greater visibility of ED consumption recommendations. PMID:27389033

  10. Estimates of US biomass energy consumption 1992

    SciTech Connect

    Not Available

    1994-05-06

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  11. State energy data report 1995 - consumption estimates

    SciTech Connect

    1997-12-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public, and (2) to provide the historical series necessary for EIA`s energy models.

  12. Brand switching or reduced consumption? A study of how cigarette taxes affect tobacco consumption.

    PubMed

    Chen, Chiang-Ming; Chang, Kuo-Liang; Lin, Lin; Lee, Jwo-Leun

    2014-12-01

    We examined the influence of cigarette taxes on tobacco consumption, with an emphasis on smokers' choice between reducing cigarette consumption and switching brands. We constructed three scenario-based models to study the following two subjects: (1) the relationship between deciding whether to reduce one's cigarette consumption and to practice brand switching (simultaneous or sequential); (2) the key determinants that affect smokers' decisions in terms of their consumption and brand switching when facing higher taxes. We applied data collected from a survey in Taiwan, and the results indicated that both independent and two-stage decision-making models generated very similar conclusions. We also found that gender difference contributed to reduce cigarette consumption. In addition, this study indicated that high-income smokers were less likely to switch brands, whereas well-educated smokers were more likely to switch brands. Most importantly, we questioned the effectiveness of cigarette tax policy, as our results suggested that higher price did not necessarily reduce consumption. Indeed, data indicated that <24 % of smokers actually reduced their cigarette consumption after the tax on cigarettes increased.

  13. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  14. Energy: Production, Consumption, and Consequences.

    ERIC Educational Resources Information Center

    Helm, John L., Ed.

    Energy policy in the United States and much of the analysis behind those policies is largely incomplete according to many. Systems for energy production, distribution, and use have traditionally been analyzed by supply sector, yet such analyses cannot capture the complex interplay of technology, economics, public policy, and environmental concerns…

  15. Energy Consumption Monitoring System for Large Complexes

    NASA Astrophysics Data System (ADS)

    Jorge, André; Guerreiro, João; Pereira, Pedro; Martins, João; Gomes, Luís

    This paper describes the development of an open source system for monitoring and data acquisition of several energy analyzers. The developed system is based on a computer with Internet/Intranet connection by means of RS485 using Modbus RTU as communication protocol. The monitoring/metering system was developed for large building complexes and was validated in the Faculdade de Ciências e Tecnologia University campus. The system considers two distinct applications. The first one allows the user to verify, in real time, the energy consumption of any department in the complex, produce load diagrams, tables and print, email or save all available data. The second application keeps records of active/reactive energy consumption in order to verify the existence of some anomalous situation, and also monthly charge energy consumption to each corresponding department.

  16. Commercial Buildings Energy Consumption Survey - Office Buildings

    EIA Publications

    2010-01-01

    Provides an in-depth look at this building type as reported in the 2003 Commercial Buildings Energy Consumption Survey. Office buildings are the most common type of commercial building and they consumed more than 17% of all energy in the commercial buildings sector in 2003. This special report provides characteristics and energy consumption data by type of office building (e.g. administrative office, government office, medical office) and information on some of the types of equipment found in office buildings: heating and cooling equipment, computers, servers, printers, and photocopiers.

  17. Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

    ERIC Educational Resources Information Center

    Poulos, Natalie S.; Pasch, Keryn E.

    2016-01-01

    Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

  18. Developing an Analytical Framework for Argumentation on Energy Consumption Issues

    ERIC Educational Resources Information Center

    Jin, Hui; Mehl, Cathy E.; Lan, Deborah H.

    2015-01-01

    In this study, we aimed to develop a framework for analyzing the argumentation practice of high school students and high school graduates. We developed the framework in a specific context--how energy consumption activities such as changing diet, converting forests into farmlands, and choosing transportation modes affect the carbon cycle. The…

  19. Analysis and Optimization of Building Energy Consumption

    NASA Astrophysics Data System (ADS)

    Chuah, Jun Wei

    Energy is one of the most important resources required by modern human society. In 2010, energy expenditures represented 10% of global gross domestic product (GDP). By 2035, global energy consumption is expected to increase by more than 50% from current levels. The increased pace of global energy consumption leads to significant environmental and socioeconomic issues: (i) carbon emissions, from the burning of fossil fuels for energy, contribute to global warming, and (ii) increased energy expenditures lead to reduced standard of living. Efficient use of energy, through energy conservation measures, is an important step toward mitigating these effects. Residential and commercial buildings represent a prime target for energy conservation, comprising 21% of global energy consumption and 40% of the total energy consumption in the United States. This thesis describes techniques for the analysis and optimization of building energy consumption. The thesis focuses on building retrofits and building energy simulation as key areas in building energy optimization and analysis. The thesis first discusses and evaluates building-level renewable energy generation as a solution toward building energy optimization. The thesis next describes a novel heating system, called localized heating. Under localized heating, building occupants are heated individually by directed radiant heaters, resulting in a considerably reduced heated space and significant heating energy savings. To support localized heating, a minimally-intrusive indoor occupant positioning system is described. The thesis then discusses occupant-level sensing (OLS) as the next frontier in building energy optimization. OLS captures the exact environmental conditions faced by each building occupant, using sensors that are carried by all building occupants. The information provided by OLS enables fine-grained optimization for unprecedented levels of energy efficiency and occupant comfort. The thesis also describes a retrofit

  20. Drivers of U.S. Household Energy Consumption, 1980-2009

    EIA Publications

    2015-01-01

    In 2012, the residential sector accounted for 21% of total primary energy consumption and about 20% of carbon dioxide emissions in the United States (computed from EIA 2013). Because of the impacts of residential sector energy use on the environment and the economy, this study was undertaken to help provide a better understanding of the factors affecting energy consumption in this sector. The analysis is based on the U.S. Energy Information Administration's (EIA) residential energy consumption surveys (RECS) 1980-2009.

  1. Climate impacts on extreme energy consumption of different types of buildings.

    PubMed

    Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

    2015-01-01

    Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

  2. Climate impacts on extreme energy consumption of different types of buildings.

    PubMed

    Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

    2015-01-01

    Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings. PMID:25923205

  3. Understanding energy consumption: Beyond technology and economics

    SciTech Connect

    Wilhite, H.; Shove, E.

    1998-07-01

    This paper summarizes two years of efforts among a cross-disciplinary group of senior researchers to bring social and cultural perspectives to modeling of household energy consumption. The work has been organized by the Center for Energy Studies of the University of Geneva. The researchers represent both the physical and social sciences, several institutions and a number of countries. The initiative was based on an acknowledgement of the failure of technical and economic models to explain consumption or more importantly, how consumption patterns change. Technical and economic models most often either ignore social and cultural issues or reduce them to parameters of other variables. An important objective for the Geneva Group has been to engage modelers and social scientists in a dialogue which brings social and cultural context to the fore. The process reveals interesting insights into the frictions of cross-disciplinary interaction and the emergence of new perspectives. Various classical modeling approaches have been discussed and rejected. Gradually, a framework has emerged which says something about the appropriate institutions and actors which contribute to consumption patterns; about how they are related; and finally about how the interinstitutional relationships and the consumption patterns themselves change. A key point of convergence is that a complete understanding of energy end-use will not be possible from an analysis directed at the point of end use alone. The analysis must incorporate what happens inside institutions like manufacturers, retailers, and public policy organizations as well as how those organizations interact with consumers, including media and advertising. Progress towards a better understanding of energy consumption requires a greater engagement of social scientists with these heretofore little explored actors an relationships.

  4. Computer Profile of School Facilities Energy Consumption.

    ERIC Educational Resources Information Center

    Oswalt, Felix E.

    This document outlines a computerized management tool designed to enable building managers to identify energy consumption as related to types and uses of school facilities for the purpose of evaluating and managing the operation, maintenance, modification, and planning of new facilities. Specifically, it is expected that the statistics generated…

  5. Household Energy Consumption Segmentation Using Hourly Data

    SciTech Connect

    Kwac, J; Flora, J; Rajagopal, R

    2014-01-01

    The increasing US deployment of residential advanced metering infrastructure (AMI) has made hourly energy consumption data widely available. Using CA smart meter data, we investigate a household electricity segmentation methodology that uses an encoding system with a pre-processed load shape dictionary. Structured approaches using features derived from the encoded data drive five sample program and policy relevant energy lifestyle segmentation strategies. We also ensure that the methodologies developed scale to large data sets.

  6. Projecting household energy consumption within a conditional demand framework

    SciTech Connect

    Teotia, A.; Poyer, D.

    1991-01-01

    Few models attempt to assess and project household energy consumption and expenditure by taking into account differential household choices correlated with such variables as race, ethnicity, income, and geographic location. The Minority Energy Assessment Model (MEAM), developed by Argonne National Laboratory (ANL) for the US Department of Energy (DOE), provides a framework to forecast the energy consumption and expenditure of majority, black, Hispanic, poor, and nonpoor households. Among other variables, household energy demand for each of these population groups in MEAM is affected by housing factors (such as home age, home ownership, home type, type of heating fuel, and installed central air conditioning unit), demographic factors (such as household members and urban/rural location), and climate factors (such as heating degree days and cooling degree days). The welfare implications of the revealed consumption patterns by households are also forecast. The paper provides an overview of the model methodology and its application in projecting household energy consumption under alternative energy scenarios developed by Data Resources, Inc., (DRI).

  7. Projecting household energy consumption within a conditional demand framework

    SciTech Connect

    Teotia, A.; Poyer, D.

    1991-12-31

    Few models attempt to assess and project household energy consumption and expenditure by taking into account differential household choices correlated with such variables as race, ethnicity, income, and geographic location. The Minority Energy Assessment Model (MEAM), developed by Argonne National Laboratory (ANL) for the US Department of Energy (DOE), provides a framework to forecast the energy consumption and expenditure of majority, black, Hispanic, poor, and nonpoor households. Among other variables, household energy demand for each of these population groups in MEAM is affected by housing factors (such as home age, home ownership, home type, type of heating fuel, and installed central air conditioning unit), demographic factors (such as household members and urban/rural location), and climate factors (such as heating degree days and cooling degree days). The welfare implications of the revealed consumption patterns by households are also forecast. The paper provides an overview of the model methodology and its application in projecting household energy consumption under alternative energy scenarios developed by Data Resources, Inc., (DRI).

  8. Issues in International Energy Consumption Analysis: Canadian Energy Demand

    EIA Publications

    2015-01-01

    The residential sector is one of the main end-use sectors in Canada accounting for 16.7% of total end-use site energy consumption in 2009 (computed from NRCan 2012. pp, 4-5). In this year, the residential sector accounted for 54.5% of buildings total site energy consumption. Between 1990 and 2009, Canadian household energy consumption grew by less than 11%. Nonetheless, households contributed to 14.6% of total energy-related greenhouse gas emissions in Canada in 2009 (computed from NRCan 2012). This is the U.S. Energy Information Administration’s second study to help provide a better understanding of the factors impacting residential energy consumption and intensity in North America (mainly the United States and Canada) by using similar methodology for analyses in both countries.

  9. Global energy consumption and production in 2000

    NASA Astrophysics Data System (ADS)

    Allen, E. L.; Davison, C.; Dougher, R.; Edmonds, J. A.; Reilly, J.

    1981-02-01

    This study anticipates that global energy demand will continue to expand through 2000, although at a slower pace than in 1965 to 1978. Growth of supply is expected to be largely in conventional, nonrenewable fuels - coal, oil, uranium, and natural gas. Energy growth is also expected to slow down in terms of energy consumption per unit of output as a consequence of continuing efficiency improvements, which, in turn, result from higher energy prices. Slower rates of economic growth are expected in all groups of countries, developed and underdeveloped.

  10. Machining strategies exploring reduction in energy consumption

    NASA Astrophysics Data System (ADS)

    Mamun, Abdullah Al

    The main aim of this thesis is to explore machining strategies, analyzing energy consumption using Design of Experiments (DOE) at the material removal rate (MRR), compare to cutting geometrical trajectories according to CNC parameters such as spindle RPM, feed rate, depth of cut per pass and total depth of cut. Spindle RPM, depth of cut per pass, and feed rate are selected as the main three factors and each factor has two levels: low-level (-) and high-level (+). These experiments have been performed at an end-milling machine by using a concept of a constant volume of material removal processes in the circular and linear geometrical slots in pine wood blocks. Standard energy logger equipment has used to measure energy consumption during end-milling operation. Different statistical analysis, such as ANOVA, regression line, and cause & effect diagram have used to show different energy consumption results in the material removal process. At the end the of data analysis, it is found that a significant amount of electricity demand is associated with machining pre-cutting & post-cutting stage and this significant amount of electricity demand is defined as peripheral energy. This peripheral energy is not involved in the actual performance of material removal process in the end-milling process. In the [Figure 11] end-milling process has been involved with pine wood blocks at constant volume of material removal (2.8 cubic inch) process. Results can be varied using of hard material removal process, such as steel & aluminum metals.

  11. Electrical energy consumption control apparatuses and electrical energy consumption control methods

    DOEpatents

    Hammerstrom, Donald J.

    2012-09-04

    Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

  12. Rat splanchnic net oxygen consumption, energy implications.

    PubMed Central

    Casado, J; Fernández-López, J A; Esteve, M; Rafecas, I; Argilés, J M; Alemany, M

    1990-01-01

    1. The blood flow, PO2, pH and PCO2 have been estimated in portal and suprahepatic veins as well as in hepatic artery of fed and overnight starved rats given an oral glucose load. From these data the net intestinal, hepatic and splanchnic balances for oxygen and bicarbonate were calculated. The oxygen consumption of the intact animal has also been measured under comparable conditions. 2. The direct utilization of oxygen balances as energy equivalents when establishing the contribution of energy metabolism of liver and intestine to the overall energy expenses of the rat, has been found to be incorrect, since it incorporates the intrinsic error of interorgan proton transfer through bicarbonate. Liver and intestine produced high net bicarbonate balances in all situations tested, implying the elimination (by means of oxidative pathways, i.e. consuming additional oxygen) of high amounts of H+ generated with bicarbonate. The equivalence in energy output of the oxygen balances was then corrected for bicarbonate production to 11-54% lower values. 3. Intestine and liver consume a high proportion of available oxygen, about one-half in basal (fed or starved) conditions and about one-third after gavage, the intestine consumption being about 15% in all situations tested and the liver decreasing its oxygen consumption with gavage. PMID:2129230

  13. Assessing the Energy Consumption of Smartphone Applications

    NASA Astrophysics Data System (ADS)

    Abousaleh, Mustafa M.

    Mobile devices are increasingly becoming essential in people's lives. The advancement in technology and mobility factor are allowing users to utilize mobile devices for communication, entertainment, financial planning, fitness tracking, etc. As a result, mobile applications are also becoming important factors contributing to user utility. However, battery capacity is the limiting factor impacting the quality of user experience. Hence, it is imperative to understand how much energy impact do mobile apps have on the system relative to other device activities. This thesis presents a systematic studying of the energy impact of mobile apps features. Time-series electrical current measurements are collected from 4 different modern smartphones. Statistical analysis methodologies are used to calculate the energy impact of each app feature by identifying and extracting mobile app-feature events from the overall current signal. In addition, the app overhead energy costs are also computed. Total energy consumption equations for each component is developed and an overall total energy consumption equation is presented. Minutes Lost (ML) of normal phone operations due to the energy consumption of the mobile app functionality is computed for cases where the mobile app is simulated to run on the various devices for 30 minutes. Tutela Technologies Inc. mobile app, NAT, is used for this study. NAT has two main features: QoS and Throughput. The impact of the QoS feature is indistinguishable, i.e. ML is zero, relative to other phone activities. The ML with only the TP feature enabled is on average 2.1 minutes. Enabling the GPS increases the ML on average to 11.5 minutes. Displaying the app GUI interface in addition to running the app features and enabling the GPS results in an average ML of 12.4 minutes. Amongst the various mobile app features and components studied, the GPS consumes the highest amount of energy. It is estimated that the GPS increases the ML by about 448%.

  14. Water consumption, not expectancies about water consumption, affects cognitive performance in adults.

    PubMed

    Edmonds, Caroline J; Crombie, Rosanna; Ballieux, Haiko; Gardner, Mark R; Dawkins, Lynne

    2013-01-01

    Research has shown that water supplementation positively affects cognitive performance in children and adults. The present study considered whether this could be a result of expectancies that individuals have about the effects of water on cognition. Forty-seven participants were recruited and told the study was examining the effects of repeated testing on cognitive performance. They were assigned either to a condition in which positive expectancies about the effects of drinking water were induced, or a control condition in which no expectancies were induced. Within these groups, approximately half were given a drink of water, while the remainder were not. Performance on a thirst scale, letter cancellation, digit span forwards and backwards and a simple reaction time task was assessed at baseline (before the drink) and 20 min and 40 min after water consumption. Effects of water, but not expectancy, were found on subjective thirst ratings and letter cancellation task performance, but not on digit span or reaction time. This suggests that water consumption effects on letter cancellation are due to the physiological effects of water, rather than expectancies about the effects of drinking water.

  15. Using LEDs to reduce energy consumption

    NASA Astrophysics Data System (ADS)

    Eweni, Chukwuebuka E.

    The most popularly used light bulb in homes is the incandescent. It is also the least energy efficient. The filament in the bulb is so thin that it causes resistance in the electricity, which in turn causes the electricity's energy to form heat. This causes the incandescent to waste a lot of energy forming heat rather than forming the light. It uses 15 lumens per watt of input power. A recorded MATLAB demonstration showcased LED versatility and how it can be used by an Arduino UNO board. The objective of this thesis is to showcase how LEDs can reduce energy consumption through the use of an Arduino UNO board and MATLAB and to discuss the applications of LED. LED will be the future of lighting homes and will eventually completely incandescent bulbs when companies begin to make the necessary improvements to the LED.

  16. Household energy and consumption and expenditures, 1990. Supplement, Regional

    SciTech Connect

    Not Available

    1993-03-02

    The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990.

  17. 10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This... consumption, but instead calculate the energy use rate (kWh/100 lbs Ice) by dividing the energy...

  18. Public perceptions of energy consumption and savings

    PubMed Central

    Attari, Shahzeen Z.; DeKay, Michael L.; Davidson, Cliff I.; Bruine de Bruin, Wändi

    2010-01-01

    In a national online survey, 505 participants reported their perceptions of energy consumption and savings for a variety of household, transportation, and recycling activities. When asked for the most effective strategy they could implement to conserve energy, most participants mentioned curtailment (e.g., turning off lights, driving less) rather than efficiency improvements (e.g., installing more efficient light bulbs and appliances), in contrast to experts’ recommendations. For a sample of 15 activities, participants underestimated energy use and savings by a factor of 2.8 on average, with small overestimates for low-energy activities and large underestimates for high-energy activities. Additional estimation and ranking tasks also yielded relatively flat functions for perceived energy use and savings. Across several tasks, participants with higher numeracy scores and stronger proenvironmental attitudes had more accurate perceptions. The serious deficiencies highlighted by these results suggest that well-designed efforts to improve the public's understanding of energy use and savings could pay large dividends. PMID:20713724

  19. Energy consumption of personal computer workstations

    SciTech Connect

    Szydlowski, R.F.; Chvala, W.D. Jr.

    1994-08-01

    A field study directly measured the electric demand of 189 personal computer workstations for 1-week intervals, and a survey recorded the connected equipment at 1,846 workstations in six buildings. Each separate workstation component (e.g., computer, monitor, printer, modem, and other peripheral) was individually monitored to obtain detailed electric demand profiles. Other analyses included comparison of nameplate power rating with measured power consumption and the energy savings potential and cost-effectiveness of a controller that automatically turns off computer workstation equipment during inactivity. An important outcome of the work is the development of a standard workstation demand profile and a technique for estimating a whole-building demand profile. Together, these provide a method for transferring this information to utility energy analysts, design engineers, building energy modelers, and others. A life-cycle cost analysis was used to determine the cost-effectiveness of three energy conservation measures: (1) energy awareness education, (2) retrofit power controller installation, and (3) purchase of energy-efficient PCs.

  20. Low energy consumption spintronics using multiferroic heterostructures.

    PubMed

    Trassin, Morgan

    2016-01-27

    We review the recent progress in the field of multiferroic magnetoelectric heterostructures. The lack of single phase multiferroic candidates exhibiting simultaneously strong and coupled magnetic and ferroelectric orders led to an increased effort into the development of artificial multiferroic heterostructures in which these orders are combined by assembling different materials. The magnetoelectric coupling emerging from the created interface between the ferroelectric and ferromagnetic layers can result in electrically tunable magnetic transition temperature, magnetic anisotropy or magnetization reversal. The full potential of low energy consumption magnetic based devices for spintronics lies in our understanding of the magnetoelectric coupling at the scale of the ferroic domains. Although the thin film synthesis progresses resulted into the complete control of ferroic domain ordering using epitaxial strain, the local observation of magnetoelectric coupling remains challenging. The ability to imprint ferroelectric domains into ferromagnets and to manipulate those solely using electric fields suggests new technological advances for spintronics such as magnetoelectric memories or memristors.

  1. Energy Consumption of Actively Beating Flagella

    NASA Astrophysics Data System (ADS)

    Chen, Daniel; Nicastro, Daniela; Dogic, Zvonimir

    2012-02-01

    Motile cilia and flagella are important for propelling cells or driving fluid over tissues. The microtubule-based core in these organelles, the axoneme, has a nearly universal ``9+2'' arrangement of 9 outer doublet microtubules assembled around two singlet microtubules in the center. Thousands of molecular motor proteins are attached to the doublets and walk on neighboring outer doublets. The motors convert the chemical energy of ATP hydrolysis into sliding motion between adjacent doublet microtubules, resulting in precisely regulated oscillatory beating. Using demembranated sea urchin sperm flagella as an experimental platform, we simultaneously monitor the axoneme's consumption of ATP and its beating dynamics while key parameters, such as solution viscosity and ATP concentration, are varied. Insights into motor cooperativity during beating and energetic consequences of hydrodynamic interactions will be presented.

  2. Revising China's energy consumption and carbon emissions

    NASA Astrophysics Data System (ADS)

    Liu, Z.

    2015-12-01

    China is the world's largest carbon emitter and takes the lion's share of new increased emission since 2000, China's carbon emissions and mitigation efforts have received global attentions (Liu et al., Nature 500, 143-145)1. Yet China's emission estimates have been approved to be greatly uncertain (Guan et al., Nature Climate Change 2, 672-675)2. Accurate estimation becomes even crucial as China has recently pledged to reach a carbon emission peak by 2030, but no quantitative target has been given, nor is it even possible to assess without a reasonable baseline. Here we produced new estimates of Chinese carbon emissions for 1950-2012 based on a new investigation in energy consumption activities and emission factors using extensively surveyed and experimental data from 4243 mines and 602 coal samples. We reported that the total energy consumption is 10% higher than the nationally published value. The investigated emission factors used in China are significantly (40%) different from the IPCC default values which were used in drawing up several previous emission inventories. The final calculated total carbon emissions from China are 10% different than the amount reported by international data sets. The new estimate provides a revision of 4% of global emissions, which could have important implications for global carbon budgets and burden-sharing of climate change mitigation. 1 Liu, Z. et al. A low-carbon road map for China. Nature 500, 143-145 (2013). 2 Guan, D., Liu, Z., Geng, Y., Lindner, S. & Hubacek, K. The gigatonne gap in China's carbon dioxide inventories. Nature Climate Change, 672-675 (2012).

  3. Changes in cotton gin energy consumption apportioned by ten functions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The public is concerned about air quality and sustainability. Cotton producers, gin owners and plant managers are concerned about rising energy prices. Both have an interest in cotton gin energy consumption trends. Changes in cotton gins’ energy consumption over the past fifty years, a period of ...

  4. Energy consumption of personal computer workstations

    SciTech Connect

    Szydlowski, R.F.; Chvala, W.D. Jr.

    1994-02-01

    The explosive growth of the information age has had a profound effect on the appearance of today`s office. Although the telephone still remains an important part of the information exchange and processing system within an office, other electronic devices are now considered required equipment within this environment. This office automation equipment includes facsimile machines, photocopiers, personal computers, printers, modems, and other peripherals. A recent estimate of the installed base indicated that 42 million personal computers and 7.3 million printers are in place, consuming 18.2 billion kWh/yr-and this installed base is growing (Luhn 1992). From a productivity standpoint, it can be argued that this equipment greatly improves the efficiency of those working in the office. But of primary concern to energy system designers, building managers, and electric utilities is the fact that this equipment requires electric energy. Although the impact of each incremental piece of equipment is small, installation of thousands of devices per building has resulted in office automation equipment becoming the major contributor to electric consumption and demand growth in commercial buildings. Personal computers and associated equipment are the dominant part of office automation equipment. In some cases, this electric demand growth has caused office buildings electric and cooling systems to overload.

  5. Efficiency in energy production and consumption

    NASA Astrophysics Data System (ADS)

    Kellogg, Ryan Mayer

    This dissertation deals with economic efficiency in the energy industry and consists of three parts. The first examines how joint experience between pairs of firms working together in oil and gas drilling improves productivity. Part two asks whether oil producers time their drilling optimally by taking real options effects into consideration. Finally, I investigate the efficiency with which energy is consumed, asking whether extending Daylight Saving Time (DST) reduces electricity use. The chapter "Learning by Drilling: Inter-Firm Learning and Relationship Persistence in the Texas Oilpatch" examines how oil production companies and the drilling rigs they hire improve drilling productivity by learning through joint experience. I find that the joint productivity of a lead firm and its drilling contractor is enhanced significantly as they accumulate experience working together. Moreover, this result is robust to other relationship specificities and standard firm-specific learning-by-doing effects. The second chapter, "Drill Now or Drill Later: The Effect of Expected Volatility on Investment," investigates the extent to which firms' drilling behavior accords with a key prescription of real options theory: irreversible investments such as drilling should be deferred when the expected volatility of the investments' payoffs increases. I combine detailed data on oil drilling with expectations of future oil price volatility that I derive from the NYMEX futures options market. Conditioning on expected price levels, I find that oil production companies significantly reduce the number of wells they drill when expected price volatility is high. I conclude with "Daylight Time and Energy: Evidence from an Australian Experiment," co-authored with Hendrik Wolff. This chapter assesses DST's impact on electricity demand using a quasi-experiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. We show that the extension did not reduce overall

  6. Analysis of Final Energy Consumption Patterns in 10 Arab Countries

    NASA Astrophysics Data System (ADS)

    Al-Hinti, I.; Al-Ghandoor, A.

    2009-08-01

    This study presents an analysis of the energy consumption patterns in 10 Arab countries: Saudi Arabia, Kuwait, United Arab Emirates (UAE), Syria, Lebanon, Jordan, Egypt, Libya, Tunisia, and Algeria. Commonalities and variations between these countries are discussed and explained through key economic and energy indicators, and the relationship between the overall final energy consumption per capita and the GDP per capita is examined. The distribution of the final energy consumption across different sectors is also analysed, and the patterns of consumption in the industrial, transportation, and residential sectors are discussed with focus on the types of energy consumed, and the main drivers of this consumption. The findings and the conclusions of this study are believed to be beneficial to the national energy policy planners in identifying possible strengths, weaknesses, and areas of emphasis and improvement in their strategic energy plans.

  7. Intelligent Cooperative MAC Protocol for Balancing Energy Consumption

    NASA Astrophysics Data System (ADS)

    Wu, S.; Liu, K.; Huang, B.; Liu, F.

    To extend the lifetime of wireless sensor networks, we proposed an intelligent balanced energy consumption cooperative MAC protocol (IBEC-CMAC) based on the multi-node cooperative transmission model. The protocol has priority to access high-quality channels for reducing energy consumption of each transmission. It can also balance the energy consumption among cooperative nodes by using high residual energy nodes instead of excessively consuming some node's energy. Simulation results show that IBEC-CMAC can obtain longer network lifetime and higher energy utilization than direct transmission.

  8. Respiration, respiratory metabolism and energy consumption under weightless conditions

    NASA Technical Reports Server (NTRS)

    Kasyan, I. I.; Makarov, G. F.

    1975-01-01

    Changes in the physiological indices of respiration, respiratory metabolism and energy consumption in spacecrews under weightlessness conditions manifest themselves in increased metabolic rates, higher pulmonary ventilation volume, oxygen consumption and carbon dioxide elimination, energy consumption levels in proportion to reduction in neuroemotional and psychic stress, adaptation to weightlessness and work-rest cycles, and finally in a relative stabilization of metabolic processes due to hemodynamic shifts.

  9. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The Design... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR...

  10. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The Design... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR...

  11. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1 The Design... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR...

  12. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The Design... 10 Energy 3 2011-01-01 2011-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR...

  13. 10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Alternative § 434.508 Determination of the design energy consumption and design energy cost. 508.1The Design... 10 Energy 3 2013-01-01 2013-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR...

  14. Estimates of U.S. Biomass Energy Consumption 1992

    EIA Publications

    1994-01-01

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass derived primary energy used by the U.S. economy. It presents estimates of 1991 and 1992 consumption.

  15. [Energy Consumption Comparison and Energy Saving Approaches for Different Wastewater Treatment Processes in a Large-scale Reclaimed Water Plant].

    PubMed

    Yang, Min; Li, Ya-ming; Wei, Yuan-song; Lü, Jian; Yu, Da-wei; Liu, Ji-bao; Fan, Yao-bo

    2015-06-01

    Energy consumption is the main performance indicator of reclaimed water plant (RWP) operation. Methods of specific energy consumption analysis, unit energy consumption analysis and redundancy analysis were applied to investigate the composition and spatio-temporal distribution of energy consumption in Qinghe RWP with inverted A2/O, A2/O and A2/O-MBR processes. And the A2/ O-MBR process was mainly analyzed to identify the main nodes and causes for high energy consumption, approaches for energy saving were explored, and the energy consumption before and after upgrading for energy saving was compared. The results showed that aeration was the key factor affecting energy consumption in both conventional and A2/O-MBR processes, accounting for 42.97% and 50.65% of total energy consumption, respectively. A pulsating aeration allowed an increasing membrane flux and remarkably reduced the energy consumption of the A2/O-MBR process while still meeting the effluent standard, e.g., the membrane flux was increased by 20%, and the energy consumptions per kiloton wastewater and kilogram COD(removed) were decreased by 42.39% to 0.53 kW-h-kg-3 and by 54.74% to 1.29 kW x h x kg(-1), respectively. The decrease of backflow ratio in the A2/O-MBR process within a certain range would not deteriorate the effluent quality due to its insignificant correlation with the effluent quality, and therefore may be considered as one of the ways for further energy saving. PMID:26387326

  16. 10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. (a) Scope....

  17. Optimal Energy Consumption Analysis of Natural Gas Pipeline

    PubMed Central

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent. PMID:24955410

  18. Optimal energy consumption analysis of natural gas pipeline.

    PubMed

    Liu, Enbin; Li, Changjun; Yang, Yi

    2014-01-01

    There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent.

  19. Simulation of energy consumption for quadruped walking vehicle

    NASA Astrophysics Data System (ADS)

    Lei, Jingtao; Gao, Feng; Xu, Guoyan

    2006-11-01

    Simulation of energy consumption for walking vehicle is one of the basic way to preliminarily estimate the energy that will be consumed before constructing the real vehicle, providing basis for the design of vehicle to minish energy consumption. One of the most influential factors of the accuracy dynamic simulation is the appropriate contact model between leg and ground. In this paper, we adopt virtual prototyping technique to develop the dynamic modeling of a quadruped walking vehicle considering contact force between legs and ground during walking, finish simulation of dynamics and obtain dynamics characteristics, investigate the effects of different contact condition and the energy consumption. The purpose is to analyze the relationship between energy consumption and relevant influence factors, and the energy efficiency during walking is discussed with different walking velocity, strokes, duty factors and different contact material. Moreover contact force is obtained from simulations. Commercial ADAMS package is used.

  20. [Relationships between settlement morphology transition and residents commuting energy consumption].

    PubMed

    Zhou, Jian; Xiao, Rong-Bo; Sun, Xiang

    2013-07-01

    Settlement morphology transition is triggered by rapid urbanization and urban expansion, but its relationships with residents commuting energy consumption remains ambiguous. It is of significance to understand the controlling mechanisms of sustainable public management policies on the energy consumption and greenhouse gases emission during the process of urban settlement morphology transition. Taking the Xiamen City of East China as a case, and by using the integrated land use and transportation modeling system TRANUS, a scenario analysis was made to study the effects of urban settlement morphology transition on the urban spatial distribution of population, jobs, and land use, and on the residents commuting energy consumption and greenhouse gasses emission under different scenarios. The results showed that under the Business As Usual (BAU) scenario, the energy consumption of the residents at the morning peak travel time was 54.35 tce, and the CO2 emission was 119.12 t. As compared with those under BAU scenario, both the energy consumption and the CO2 emission under the Transition of Settlement Morphology (TSM) scenario increased by 12%, and, with the implementation of the appropriate policies such as land use, transportation, and economy, the energy consumption and CO2 emission under the Transition of Settlement Morphology with Policies (TSMP) scenario reduced by 7%, indicating that urban public management policies could effectively control the growth of residents commuting energy consumption and greenhouse gases emission during the period of urban settlement morphology transition.

  1. Energy consumption analysis for the Mars deep space station

    NASA Technical Reports Server (NTRS)

    Hayes, N. V.

    1982-01-01

    Results for the energy consumption analysis at the Mars deep space station are presented. It is shown that the major energy consumers are the 64-Meter antenna building and the operations support building. Verification of the antenna's energy consumption is highly dependent on an accurate knowlege of the tracking operations. The importance of a regular maintenance schedule for the watt hour meters installed at the station is indicated.

  2. Energy Consumption Series: Assessment of energy use in multibuilding facilities

    SciTech Connect

    Not Available

    1993-08-01

    This study originally had two primary objectives: (1) to improve EIA`s estimates of district heat consumption for commercial buildings in the CBECS sample that lacked individual metering and (2) to provide a basis for estimating primary fuel consumption by central plants serving commercial buildings. These objectives were expanded to include additional questions relating to these central plants. Background information is provided on the CBECS and on district heating and cooling, which is the most important type of energy-related service provided by multibuilding facilities with central physical plants. Chapters 2 and 3 present data results on multibuilding facilities from the 1989 CBECS and the pilot Facility Survey. Chapter 2 presents the characteristics of multibuilding facilities and the individual buildings located on these facilities. Chapter 3 provides estimates of energy inputs and outputs of multibuilding facilities with central physical plants. Chapter 4 assesses the quality of the pilot Facility Survey and includes recommendations for future work in this area. The appendices provide more detailed information on the Facility Survey itself, in particular the limitations on the use of these results. Appendix B, ``Data Quality``, provides detailed information relating to the limitations of the data and the conclusions presented in this report. As a pilot study, the 1989 Facility Survey has some serious flaws and limitations which are recognized in this report.

  3. 76 FR 65734 - Guidance for Industry on Evaluating the Safety of Flood-Affected Food Crops for Human Consumption...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-24

    ...-Affected Food Crops for Human Consumption; Availability AGENCY: Food and Drug Administration, HHS. ACTION... entitled ``Guidance for Industry: Evaluating the Safety of Flood-Affected Food Crops for Human Consumption... information on how to evaluate the safety of flood-affected food crops for human consumption. DATES:...

  4. 10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers...

  5. Energy consumption evaluation of fuel bioethanol production from sweet potato.

    PubMed

    Ferrari, Mario Daniel; Guigou, Mairan; Lareo, Claudia

    2013-05-01

    The energy consumption for different operative conditions and configurations of the bioethanol production industrial process from an experimental variety of sweet potato (Ipomea batatas) K 9807.1 was evaluated. A process simulation model was developed using SuperPro Designer® software. The model was based on experimental data gathered from our laboratory experiments and technology and equipment suppliers. The effects of the dry matter ratio of sweet potato to water, the fermentation efficiency, and sweet potato sugar content, on the energy consumption (steam and electricity) were respectively evaluated. All factors were significant. The best ratio of dry matter to total water to work with fresh sweet potato was 0.2 kg dry sweet potato/kg water, as for greater ratios was not found a significant reduction in energy consumption. Also, the drying of the sweet potato previous its processing was studied. It presented an energy consumption greater than the energetic content of the bioethanol produced.

  6. Energy consumption evaluation of fuel bioethanol production from sweet potato.

    PubMed

    Ferrari, Mario Daniel; Guigou, Mairan; Lareo, Claudia

    2013-05-01

    The energy consumption for different operative conditions and configurations of the bioethanol production industrial process from an experimental variety of sweet potato (Ipomea batatas) K 9807.1 was evaluated. A process simulation model was developed using SuperPro Designer® software. The model was based on experimental data gathered from our laboratory experiments and technology and equipment suppliers. The effects of the dry matter ratio of sweet potato to water, the fermentation efficiency, and sweet potato sugar content, on the energy consumption (steam and electricity) were respectively evaluated. All factors were significant. The best ratio of dry matter to total water to work with fresh sweet potato was 0.2 kg dry sweet potato/kg water, as for greater ratios was not found a significant reduction in energy consumption. Also, the drying of the sweet potato previous its processing was studied. It presented an energy consumption greater than the energetic content of the bioethanol produced. PMID:23567705

  7. Investigating energy consumption of coastal vacation rental homes

    NASA Astrophysics Data System (ADS)

    Myers, Sam

    In 2007, vacation rental properties in the United States accounted for more than 22% of the domestic lodging market. These properties are a unique segment of the lodging industry due to their residential design and commercial use. Coastal vacation rental properties represent the largest supply, demand and value of the nation's vacation rental supply. In the case of North Carolina's Outer Banks, tourism is the area's largest source of income, with vacation real estate agencies being the largest accommodation provider. This study uses a multiple regression analysis to investigate the energy consumption of 30 vacation rental homes on Hatteras Island. Hatteras Island's abundant supply of vacation rental homes provided a diverse sample to study energy consumption with a wide range of houses regarding size, age, and location. Since very little research has been conducted on the energy consumption of vacation rental homes, this study aims to contribute detailed information regarding the energy consumption of unique accommodation sector.

  8. Air transportation energy consumption - Yesterday, today, and tomorrow

    NASA Technical Reports Server (NTRS)

    Mascy, A. C.; Williams, L. J.

    1975-01-01

    The energy consumption by aviation is reviewed and projections of its growth are discussed. Forecasts of domestic passenger demand are presented, and the effect of restricted fuel supply and increased fuel prices is considered. The most promising sources for aircraft fuels, their availability and cost, and possible alternative fuels are reviewed. The energy consumption by various air and surface transportation modes is identified and compared on typical portal-to-portal trips. A measure of the indirect energy consumed by ground and air modes is defined. Historical trends in aircraft energy intensities are presented and the potential fuel savings with new technologies are discussed.

  9. Wireless network interface energy consumption implications of popular streaming formats

    NASA Astrophysics Data System (ADS)

    Chandra, Surendar

    2001-12-01

    With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

  10. Causes and Solutions for High Energy Consumption in Traditional Buildings Located in Hot Climate Regions

    NASA Astrophysics Data System (ADS)

    Barayan, Olfat Mohammad

    A considerable amount of money for high-energy consumption is spent in traditional buildings located in hot climate regions. High-energy consumption is significantly influenced by several causes, including building materials, orientation, mass, and openings' sizes. This paper aims to identify these causes and find practical solutions to reduce the annual cost of bills. For the purpose of this study, simulation research method has been followed. A comparison between two Revit models has also been created to point out the major cause of high-energy consumption. By analysing different orientations, wall insulation, and window glazing and applying some other high performance building techniques, a conclusion was found to confirm that appropriate building materials play a vital role in affecting energy cost. Therefore, the ability to reduce the energy cost by more than 50% in traditional buildings depends on a careful balance of building materials, mass, orientation, and type of window glazing.

  11. Energy drinks consumption in male construction workers, Chonburi province.

    PubMed

    Pichainarong, Natchaporn; Chaveepojnkamjorn, Wisit; Khobjit, Pattama; Veerachai, Viroj; Sujirarat, Dusit

    2004-12-01

    This unmatched case-control study aimed to determine the relationship among caffeine drinks consumption known as "energy drinks consumption", drug dependence and related factors in male construction workers in Chonburi Province. It was conducted during December 15, 2001 and February 15, 2002. Data were collected using interview questionnaires. The logistic regression was used to control possible confounding factors. The subjects consisted of 186 cases who had consumed energy drinks for more than 3 months and 186 controls who had given up for more than 3 months. They were frequency/group matched by age group. There was statistically significant association among energy drinks consumption and overtime work, motivation from advertisements, positive attitude of energy drinks consumption, alcohol drinks, smoking and ex-taking Kratom behavior. Multivariate analyses revealed that only 5 factors were related to energy drinks consumption: marital status (OR = 1.88, 95%CI: 1.14, 3.11), overtime work (OR = 2.84, 95%CI: 1.73, 4.64), motivation from advertisements (OR = 2.72, 95%CI: 1.67, 4.42), positive attitude of energy drinks consumption (OR = 4.06, 95%CI: 1.65, 10.01) and ex-taking Kratom behavior (OR = 2.77, 95%CI: 1.19, 6.44). As a result, construction workers should be provided with the knowledge of energy drinks consumption, the effect of drug dependence behavior, and the advantages of safe and healthy food that is cheap, readily available, and rich in nutrients. PMID:15822540

  12. State policies affecting natural gas consumption (Notice of inquiry issued on August 14, 1992)

    SciTech Connect

    Lemon, R.; Kamphuis-Zatopa, W.

    1993-03-25

    On August 14, 1992, the United States Department of Energy issued a Request for Comments Concerning State Policies Affecting Natural Gas Consumption. This Notice of (NOI) noted the increasing significance of the role played by states and sought to gain better understanding of how state policies impact the gas industry. The general trend toward a. more competitive marketplace for natural gas, as well as recent regulatory and legislative changes at the Federal level, are driving State regulatory agencies to reevaluate how they regulate natural gas. State action is having a significant impact on the use of natural gas for generating electricity, as well as affecting the cost-effective trade-off between conservation expenditures and gas use. Additionally, fuel choice has an impact upon the environment and national energy security. In light of these dimensions, the Department of Energy initiated this study of State regulation. The goals of this NOI are: (1) help DOE better understand the impact of State policies on the efficient use of gas; (2) increase the awareness of the natural gas industry and Federal and State officials to the important role of State policies and regulations; (3) create an improved forum for dialogue on State and Federal natural gas issues; and, (4) develop a consensus on an analytical agenda that would be most helpful in addressing the regulatory challenges faced by the States. Ninety-seven parties filed comments, and of these ninety-seven, fifteen parties filed reply comments. Appendix One lists these parties. This report briefly syntheses the comments received. The goal is to assist parties to judging the extent of consensus on the problems posed and the remedies suggested, aid in identifying future analytical analyses, and assist parties in assessing differences in strategies and regulatory philosophies which shape these issues and their resolution.

  13. Mapping water consumption for energy production around the Pacific Rim

    NASA Astrophysics Data System (ADS)

    Tidwell, Vincent; Moreland, Barbie

    2016-09-01

    World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. For six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

  14. Energy Consumption Information Services for Smart Home Inhabitants

    NASA Astrophysics Data System (ADS)

    Schwanzer, Michael; Fensel, Anna

    We investigate services giving users an adequate insight on his or her energy consumption habits in order to optimize it in the long run. The explored energy awareness services are addressed to inhabitants of smart homes, equipped with smart meters, advanced communication facilities, sensors and actuators. To analyze the potential of such services, a game at a social network Facebook has been designed and implemented, and the information about players' responses and interactions within the game environment has been collected and analyzed. The players have had their virtual home energy usage visualized in different ways, and had to optimize the energy consumption basing on their own perceptions of the consumption information. Evaluations reveal, in particular, that users are specifically responsive to information shown as a real-time graph and as costs in Euro, and are able to produce and share with each other policies for managing their smart home environments.

  15. Electricity's "Disappearing Act": Understanding Energy Consumption and Phantom Loads

    ERIC Educational Resources Information Center

    Rusk, Bryan; Mahfouz, Tarek; Jones, James

    2011-01-01

    Energy exists in many forms and can be converted from one form to another. However, this conversion is not 100% efficient, and energy is lost in the form of heat during conversion. In addition, approximately 6% of the monthly consumption of the average American household's electricity is neither lost nor used by its residents. These losses are…

  16. Systems accounting for energy consumption and carbon emission by building

    NASA Astrophysics Data System (ADS)

    Shao, Ling; Chen, G. Q.; Chen, Z. M.; Guo, Shan; Han, M. Y.; Zhang, Bo; Hayat, T.; Alsaedi, A.; Ahmad, B.

    2014-06-01

    The method of systems accounting for overall energy consumption and carbon emission induced by a building is illustrated in terms of a combination of process and input-output analyses with a concrete procedure to cover various material, equipment, energy and manpower inputs. A detailed case study based on raw project data in the Bill of Quantities (BOQ) is performed for the structure engineering of the landmark buildings in E-town, Beijing (Beijing Economic-Technological Development Area). Based on the embodied energy and carbon emission intensity database for the Chinese economy in 2007, the energy consumption and the carbon emission of the structure engineering of the case buildings are quantified as 4.15E+14 J and 4.83E+04 t CO2 Eq., corresponding to intensities of 6.91E+09 J/m2 and 0.81 t CO2 Eq./m2 floor area. Steel and concrete contribute respectively about 50% and 30% of the energy consumption and the carbon emission, as a result of the reinforced-concrete structure of the case buildings. Materials contribute up to about 90% of the total energy consumption and carbon emission, in contrast to manpower, energy and equipment around 8%, 1% and 0.1%, respectively.

  17. Negative Affect, Alcohol Consumption, and Female-to-Male Intimate Partner Violence: A Daily Diary Investigation

    PubMed Central

    Crane, Cory; Eckhardt, Christopher

    2014-01-01

    While research suggests that both negative affect and alcohol use are related to the risk of intimate partner violence (IPV) in male samples, less is known about the status of these risk factors in female samples. Forty-three college-age females who reported a recent history of IPV perpetration submitted six weeks of on-line daily reports pertaining to their levels of negative affect, alcohol consumption habits, and the occurrence of both male-to-female (MFPV) and female-to-male IPV (FMPV). Results indicated that negative affect significantly predicted increases in the daily risk of FMPV. MFPV also significantly predicted FMPV risk. Alcohol consumption failed to predict FMPV perpetration on both levels of analysis. Results are discussed in terms of prevailing models of alcohol use, negative affect, and IPV. PMID:26413212

  18. Understanding energy consumption of sensor enabled applications on mobile phones.

    PubMed

    Crk, Igor; Albinali, Fahd; Gniady, Chris; Hartman, John

    2009-01-01

    Recent research in ubiquitous and mobile computing uses mobile phones and wearable accelerometers to monitor individuals' physical activities for personalized and proactive health care. The goal of this project is to measure and reduce the energy demand placed on mobile phones that monitor individuals' physical activities for extended periods of time with limited access to battery recharging and mobile phone reception. Many issues must be addressed before mobile phones become a viable platform for remote health monitoring, including: security, reliability, privacy, and, most importantly, energy. Mobile phones are battery-operated, making energy a critical resource that must be carefully managed to ensure the longest running time before the battery is depleted. In a sense, all other issues are secondary, since the mobile phone will simply not function without energy. In this project, we therefore focus on understanding the energy consumption of a mobile phone that runs MIT wockets, physical activity monitoring applications, and consider ways to reduce its energy consumption.

  19. A survey of energy drink consumption patterns among college students

    PubMed Central

    Malinauskas, Brenda M; Aeby, Victor G; Overton, Reginald F; Carpenter-Aeby, Tracy; Barber-Heidal, Kimberly

    2007-01-01

    Background Energy drink consumption has continued to gain in popularity since the 1997 debut of Red Bull, the current leader in the energy drink market. Although energy drinks are targeted to young adult consumers, there has been little research regarding energy drink consumption patterns among college students in the United States. The purpose of this study was to determine energy drink consumption patterns among college students, prevalence and frequency of energy drink use for six situations, namely for insufficient sleep, to increase energy (in general), while studying, driving long periods of time, drinking with alcohol while partying, and to treat a hangover, and prevalence of adverse side effects and energy drink use dose effects among college energy drink users. Methods Based on the responses from a 32 member college student focus group and a field test, a 19 item survey was used to assess energy drink consumption patterns of 496 randomly surveyed college students attending a state university in the Central Atlantic region of the United States. Results Fifty one percent of participants (n = 253) reported consuming greater than one energy drink each month in an average month for the current semester (defined as energy drink user). The majority of users consumed energy drinks for insufficient sleep (67%), to increase energy (65%), and to drink with alcohol while partying (54%). The majority of users consumed one energy drink to treat most situations although using three or more was a common practice to drink with alcohol while partying (49%). Weekly jolt and crash episodes were experienced by 29% of users, 22% reported ever having headaches, and 19% heart palpitations from consuming energy drinks. There was a significant dose effect only for jolt and crash episodes. Conclusion Using energy drinks is a popular practice among college students for a variety of situations. Although for the majority of situations assessed, users consumed one energy drink with a

  20. Analysis and clustering of natural gas consumption data for thermal energy use forecasting

    NASA Astrophysics Data System (ADS)

    Franco, Alessandro; Fantozzi, Fabio

    2015-11-01

    In this paper, after a brief analysis of the connections between the uses of natural gas and thermal energy use, the natural gas consumption data related to Italian market are analyzed and opportunely clustered in order to compute the typical consumption profile in different days of the week in different seasons and for the different class of users: residential, tertiary and industrial. The analysis of the data shows that natural gas consumption profile is mainly related to seasonality pattern and to the weather conditions (outside temperature, humidity and wind chiller). There is also an important daily pattern related to industrial and civil sector that, at a lower degree than the previous one, does affect the consumption profile and have to be taken into account for defining an effective short and mid term thermal energy forecasting method. A possible mathematical structure of the natural gas consumption profile is provided. Due to the strong link between thermal energy use and natural gas consumption, this analysis could be considered the first step for the development of a model for thermal energy forecasting.

  1. Research on the optimal energy consumption of oil pipeline.

    PubMed

    Liu, Enbin; Li, Changjun; Yang, Liuting; Liu, Song; Wu, Mingchang; Wang, Di

    2015-07-01

    Most of the Chinese crude oil is easy to curdle and has high viscosity, so heating transportation is usually selected. Energy consumption by this method mainly comes from furnaces and pumps. Currently, operating parameters of these pipelines were determined according to experience of dispatch. It cause high energy consumption and high cost of pipeline running, so it could not adapt to energy conservation policy. The present study focused on consuming lowest energy to operate oil transportation line. To begin with, several optimization variables were set which included pump combinations, suction pressure, discharge pressure, and station temperature. Then constraint conditions were set to establish an optimal mathematical model of running transportation line. Furthermore, genetic algorithm was used to solve the model, in meantime, selection operation, cross operation and mutation operation in the genetic algorithm were improved. Finally, a crude oil pipeline running optimization software was developed. Through optimal analyzing, S-L transportation line and contrasting with the actual working conditions, it was found that optimal operation scheme could reduce energy consumption by 5% - 9%. In addition, optimal operation scheme also considered the effect of seasons and flow on energy consumption of S-L transportation line.

  2. REDUCED ENERGY CONSUMPTION THROUGH PROJECTILE BASED EXCAVATION

    SciTech Connect

    Mark Machina

    2002-10-12

    The Projectile Based Excavation (ProjEX) program has as its goal, the reduction of energy required for production mining and secondary breakage through the use of a projectile based excavation system. It depends on the development of a low cost family of projectiles that will penetrate and break up different types of ore/rock and a low cost electric launch system. The electric launch system will eliminate the need for high cost propellant investigated for similar concepts in the past. This document reports on the progress made in the program during the past quarter. It reports on projectile development and the development of the electric launch system design.

  3. REDUCED ENERGY CONSUMPTION THROUGH PROJECTILE BASED EXCAVATION

    SciTech Connect

    Mark Machina

    2002-01-09

    The Projectile Based Excavation (ProjEX) program has as its goal, the reduction of energy required for production mining and secondary breakage through the use of a projectile based excavation system. It depends on the development of a low cost family of projectiles that will penetrate and break up different types of ore/rock and a low cost electric launch system. The electric launch system will eliminate the need for high cost propellant considered for similar concepts in the past. This document reports on the progress made in the program during the past quarter. It reports on projectile development experiments and the development of the electric launch system design.

  4. Optimal Energy Consumption Model for Smart Grid Households With Energy Storage

    NASA Astrophysics Data System (ADS)

    Rajasekharan, Jayaprakash; Koivunen, Visa

    2014-12-01

    In this paper, we propose to model the energy consumption of smart grid households with energy storage systems as an intertemporal trading economy. Intertemporal trade refers to transaction of goods across time when an agent, at any time, is faced with the option of consuming or saving with the aim of using the savings in the future or spending the savings from the past. Smart homes define optimal consumption as either balancing/leveling consumption such that the utility company is presented with a uniform demand or as minimizing consumption costs by storing energy during off-peak time periods when prices are lower and use the stored energy during peak time periods when prices are higher. Due to the varying nature of energy requirements of household and market energy prices over different time periods in a day, households face a trade-off between consuming to meet their current energy requirements and/or storing energy for future consumption and/or spending energy stored in the past. These trade-offs or consumption preferences of the household are modeled as utility functions using consumer theory. We introduce two different utility functions, one for cost minimization and another for consumption balancing/leveling, that are maximized subject to respective budget, consumption, storage and savings constraints to solve for the optimum consumption profile. The optimization problem of a household with energy storage is formulated as a geometric program for consumption balancing/leveling, while cost minimization is formulated as a linear programming problem. Simulation results show that the proposed model achieves extremely low peak to average ratio in the consumption balancing/leveling scheme with about 8% reduction in consumption costs and the least possible amount for electricity bill with about 12% reduction in consumption costs in the cost minimization scheme.

  5. REDUCED ENERGY CONSUMPTION THROUGH PROJECTILE BASED EXCAVATION

    SciTech Connect

    Mark Machina

    2003-06-06

    The Projectile Based Excavation (ProjEX) program has as its goal, the reduction of energy required for production mining and secondary breakage through the use of a projectile based excavation system. It depends on the development of a low cost family of projectiles that will penetrate and break up different types of ore/rock and a low cost electric launch system. The electric launch system will eliminate the need for high cost propellant considered for similar concepts in the past. This document reports on the program findings through the first two phases. It presents projectile design and experiment data and the preliminary design for electric launch system. Advanced Power Technologies, Inc., now BAE SYSTEMS Advanced Technologies, Inc., was forced to withdraw from the program with the loss of one of our principal mining partners, however, the experiments conducted suggest that the approach is feasible and can be made cost effective.

  6. Legitimacy of concerns about caffeine and energy drink consumption.

    PubMed

    Wesensten, Nancy J

    2014-10-01

    Whether caffeine and energy drink consumption presents a critical emerging health problem is not currently known. Available evidence suggests that energy drink consumption represents a change in the ways in which individuals in the United States consume caffeine but that the amount of caffeine consumed daily has not appreciably increased. In the present review, the question of whether Americans are sleep deprived (a potential reason for using caffeine) is briefly explored. Reported rates of daily caffeine consumption (based on beverage formulation) and data obtained from both civilian and military populations in the United States are examined, the efficacy of ingredients other than caffeine in energy drinks is discussed, and the safety and side effects of caffeine are addressed, including whether evidence supports the contention that excessive caffeine/energy drink consumption induces risky behavior. The available evidence suggests that the main legitimate concern regarding caffeine and energy drink use is the potential negative impact on sleep but that, otherwise, there is no cause for concern regarding caffeine use in the general population.

  7. Positive affective states and alcohol consumption: The moderating role of trait positive urgency.

    PubMed

    Dinc, Linda; Cooper, Andrew J

    2015-08-01

    Trait positive urgency is characterised by risky and maladaptive actions in response to extreme positive affective states. Positive urgency has previously been shown to be a risk factor for alcohol consumption and alcohol-related problems; however, there has been limited experimental research examining how positive urgency may moderate relations between affective states and alcohol consumption. In the current study, a sample of 106 participants completed a trait measure of positive urgency and were then randomly assigned to one of three mood induction conditions: a high-activation positive, a low-activation positive or a neutral mood condition. Subsequently, participants took part in a bogus beer taste test, where their alcohol consumption was subsequently measured. The results revealed that positive urgency significantly predicted increased beer consumption, but only for those participants in the high-activation positive mood induction group. The findings from this study provide support for positive urgency as a risk factor for alcohol use and suggest that it may be of particular relevance in social situations where individuals experience highly activated positive affective states. PMID:25863003

  8. Analysis of federal incentives used to stimulate energy consumption

    SciTech Connect

    Cole, R.J.; Cone, B.W.; Emery, J.C.; Huelshoff, M.; Lenerz, D.E.; Marcus, A.; Morris, F.A.; Sheppard, W.J.; Sommers, P.

    1981-08-01

    The purpose of the analysis is to identify and quantify Federal incentives that have increased the consumption of coal, oil, natural gas, and electricity. The introductory chapter is intended as a device for presenting the policy questions about the incentives that can be used to stimulate desired levels of energy development. In the theoretical chapter federal incentives were identified for the consumption of energy as Federal government actions whose major intent or result is to stimulate energy consumption. The stimulus comes through changing values of variables included in energy demand functions, thereby inducing energy consumers to move along the function in the direction of greater quantity of energy demanded, or through inducing a shift of the function to a position where more energy will be demanded at a given price. The demand variables fall into one of six categories: price of the energy form, price of complements, price of substitutes, preferences, income, and technology. The government can provide such incentives using six different policy instruments: taxation, disbursements, requirements, nontraditional services, traditional services, and market activity. The four major energy forms were examined. Six energy-consuming sectors were examined: residential, commercial, industrial, agricultural, transportation, and public. Two types of analyses of incentive actions are presented in this volume. The generic chapter focused on actions taken in 1978 across all energy forms. The subsequent chapters traced the patterns of incentive actions, energy form by energy form, from the beginning of the 20th century, to the present. The summary chapter includes the results of the previous chapters presented by energy form, incentive type, and user group. Finally, the implications of these results for solar policy are presented in the last chapter. (MCW)

  9. Solar Adoption and Energy Consumption in the Residential Sector

    NASA Astrophysics Data System (ADS)

    McAllister, Joseph Andrew

    This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region that have been assembled or otherwise acquired by the author, the dissertation quantifies changes in energy consumption after solar-PV installation and determines whether certain household characteristics are correlated with such changes. In doing so, it seeks to answer two related questions: First, "Do residential solar adopters increase or decrease their electricity consumption after they install a solar-PV system?" Assuming that certain categories of residential adopters increase and others decrease, the second question is "Which residential adopters increase and which decrease their consumption and why?" The database that was used to conduct this analysis includes information about 5,243 residential systems in San Diego Gas & Electric's (SDG&E) service territory installed between January 2007 and December 2010. San Diego is a national leader in the installation of small-scale solar-electric systems, with over 12,000 systems in the region installed as of January 2012, or around 14% of the total number installed in California. The author performed detailed characterization of a significant subset of the solar installations in the San Diego region. Assembled data included technical and economic characteristics of the systems themselves; the solar companies that sold and installed them; individual customer electric utility billing data; metered PV production data for a subgroup of these solar systems; and data about the properties where the systems are located. Primarily, the author was able to conduct an electricity consumption analysis at the individual household level for 2,410 PV systems installed in SDG&E service territory between January 2007 and December 2010. This analysis was designed to detect changes in electricity consumption from the pre-solar to the post-installation period. To

  10. Data-driven forecasting algorithms for building energy consumption

    NASA Astrophysics Data System (ADS)

    Noh, Hae Young; Rajagopal, Ram

    2013-04-01

    This paper introduces two forecasting methods for building energy consumption data that are recorded from smart meters in high resolution. For utility companies, it is important to reliably forecast the aggregate consumption profile to determine energy supply for the next day and prevent any crisis. The proposed methods involve forecasting individual load on the basis of their measurement history and weather data without using complicated models of building system. The first method is most efficient for a very short-term prediction, such as the prediction period of one hour, and uses a simple adaptive time-series model. For a longer-term prediction, a nonparametric Gaussian process has been applied to forecast the load profiles and their uncertainty bounds to predict a day-ahead. These methods are computationally simple and adaptive and thus suitable for analyzing a large set of data whose pattern changes over the time. These forecasting methods are applied to several sets of building energy consumption data for lighting and heating-ventilation-air-conditioning (HVAC) systems collected from a campus building at Stanford University. The measurements are collected every minute, and corresponding weather data are provided hourly. The results show that the proposed algorithms can predict those energy consumption data with high accuracy.

  11. Energy Cost and Consumption Audit Program. 1975-76 Report.

    ERIC Educational Resources Information Center

    Energy Task Force, Washington, DC.

    Results reported in this document were obtained from a questionnaire distributed to higher education business officers and physical plant directors requesting information on total campus and individual building energy cost and consumption for the fiscal year July 1, 1975, through June 30, 1976. Usable reports were received from 330 (22 percent) of…

  12. A method for evaluating transport energy consumption in suburban areas

    SciTech Connect

    Marique, Anne-Francoise Reiter, Sigrid

    2012-02-15

    Urban sprawl is a major issue for sustainable development. It represents a significant contribution to energy consumption of a territory especially due to transportation requirements. However, transport energy consumption is rarely taken into account when the sustainability of suburban structures is studied. In this context, the paper presents a method to estimate transport energy consumption in residential suburban areas. The study aimed, on this basis, at highlighting the most efficient strategies needed to promote awareness and to give practical hints on how to reduce transport energy consumption linked to urban sprawl in existing and future suburban neighborhoods. The method uses data collected by using empirical surveys and GIS. An application of this method is presented concerning the comparison of four suburban districts located in Belgium to demonstrate the advantages of the approach. The influence of several parameters, such as distance to work places and services, use of public transport and performance of the vehicles, are then discussed to allow a range of different development situations to be explored. The results of the case studies highlight that traveled distances, and thus a good mix between activities at the living area scale, are of primordial importance for the energy performance, whereas means of transport used is only of little impact. Improving the performance of the vehicles and favoring home-work give also significant energy savings. The method can be used when planning new areas or retrofitting existing ones, as well as promoting more sustainable lifestyles regarding transport habits. - Highlights: Black-Right-Pointing-Pointer The method allows to assess transport energy consumption in suburban areas and highlight the best strategies to reduce it. Black-Right-Pointing-Pointer Home-to-work travels represent the most important part of calculated transport energy consumption. Black-Right-Pointing-Pointer Energy savings can be achieved by

  13. Socio-cultural and economic factors affecting food consumption patterns in the Arab countries.

    PubMed

    Musaiger, A O

    1993-04-01

    Several factors have been found to determine the dietary habits of the people in the Arab world. Food consumption pattern has dramatically changed in some Arab countries as a result of sudden increase in income from oil revenue. It is believed that food subsidy policy has adversely affected the food habits in the Gulf states by encouraging the intake of fat, sugar, rice, wheat flour and meat. Socio-cultural factors such as religion, beliefs, food preferences, gender discrimination, education and women's employment all have a noticeable influence on food consumption patterns in this region. Mass media, especially televised food advertisements, play an important role in modifying the dietary habits. The migration movement, particularly that which was carried out during the 70s has a great impact on the food practices in many Arab countries. Comprehensive studies on social, cultural and economic factors associated with food consumption patterns in the Arab region are highly recommended.

  14. Energy intensity, electricity consumption, and advanced manufacturing-technology usage

    SciTech Connect

    Doms, M.E.; Dunne, T.

    1995-07-01

    This article reports on the relationship between the usage of advanced manufacturing technologies (AMTs) and energy consumption patterns in manufacturing plants. Using data from the Survey of Manufacturing Technology and the 1987 Census of Manufactures, we model the energy intensity and the electricity intensity of plants as functions of AMT usage and plant age. The main findings are that plants that utilize AMTs are less-energy intensive than plants not using AMTs, but consume proportionately more electricity as a fuel source. Additionally, older plants are generally more energy intensive and rely on fossil fuels to a greater extent than younger plants. 25 refs., 3 tabs.

  15. Impact of electric cars on national energy consumption

    NASA Astrophysics Data System (ADS)

    Agarwal, P. D.

    1980-02-01

    Energy utilization of electric vehicles is discussed in terms of energy efficiency in comparison to internal combustion engine automobiles, starting from oil or coal as the prime energy source. It is found that although an electric car does not save primary energy resources, it can transfer some of the transportation fuel needs from petroleum to coal, nuclear, or hydropower. With reference to the impact of electric vehicles on reduction of petroleum consumption, it is shown that the dependence of the United States on foreign oil can be reduced much more quickly and at much lower cost by converting electric utility boilers from oil to coal.

  16. Building and occupant characteristics as determinants of residential energy consumption

    SciTech Connect

    Nieves, L.A.; Nieves, A.L.

    1981-10-01

    The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation. The third chapter contains information regarding households' willingness to make energy conserving investments and their ranking of various conservation features. In the final chapter conclusions and recommendations are presented with an emphasis on the policy implications of this study. (MCW)

  17. Effects of climate change on building energy consumption in cities

    NASA Astrophysics Data System (ADS)

    Matsuura, K.

    1995-03-01

    Sensitivity of building-energy consumption to changing urban environments is examined by simulating building energy loads in hypothetical urban settings. A modified version of an algorithm developed by the U.S. Army Construction Engineering Research Laboratory is used to evaluate energy requirements. Energy loads for two buildings of interest are estimated for changing climatic conditions (air temperature) as well as changing environments around the building. An isolated building and a building surrounded by several other buildings are considered. Results indicate that climate warming may lead to energy savings in a wide range of climates while savings also depend on the nature of the building and its use. In cool climates, climate warming forces net energy-load decreases through reductions of the winter heating loads. For example, a one-degree increase in annual air temperature in Duluth led to a 10 kWh decrease in net energy loads for a small office building. In warm climates, urbanization tends to accelerate energy consumption although shadowing may contribute significantly to decreases in summer cooling loads. In Phoenix, annual mean daily net energy loads decreased by about 10 kWh due to shadowing for the same office building. Even in relatively cool regions, summer cooling-load reductions caused by shadowing are effective.

  18. Muscle Synergies Heavily Influence the Neural Control of Arm Endpoint Stiffness and Energy Consumption.

    PubMed

    Inouye, Joshua M; Valero-Cuevas, Francisco J

    2016-02-01

    Much debate has arisen from research on muscle synergies with respect to both limb impedance control and energy consumption. Studies of limb impedance control in the context of reaching movements and postural tasks have produced divergent findings, and this study explores whether the use of synergies by the central nervous system (CNS) can resolve these findings and also provide insights on mechanisms of energy consumption. In this study, we phrase these debates at the conceptual level of interactions between neural degrees of freedom and tasks constraints. This allows us to examine the ability of experimentally-observed synergies--correlated muscle activations--to control both energy consumption and the stiffness component of limb endpoint impedance. In our nominal 6-muscle planar arm model, muscle synergies and the desired size, shape, and orientation of endpoint stiffness ellipses, are expressed as linear constraints that define the set of feasible muscle activation patterns. Quadratic programming allows us to predict whether and how energy consumption can be minimized throughout the workspace of the limb given those linear constraints. We show that the presence of synergies drastically decreases the ability of the CNS to vary the properties of the endpoint stiffness and can even preclude the ability to minimize energy. Furthermore, the capacity to minimize energy consumption--when available--can be greatly affected by arm posture. Our computational approach helps reconcile divergent findings and conclusions about task-specific regulation of endpoint stiffness and energy consumption in the context of synergies. But more generally, these results provide further evidence that the benefits and disadvantages of muscle synergies go hand-in-hand with the structure of feasible muscle activation patterns afforded by the mechanics of the limb and task constraints. These insights will help design experiments to elucidate the interplay between synergies and the mechanisms

  19. Energy consumption in buildings and female thermal demand

    NASA Astrophysics Data System (ADS)

    Kingma, Boris; van Marken Lichtenbelt, Wouter

    2015-12-01

    Energy consumption of residential buildings and offices adds up to about 30% of total carbon dioxide emissions; and occupant behaviour contributes to 80% of the variation in energy consumption. Indoor climate regulations are based on an empirical thermal comfort model that was developed in the 1960s (ref. ). Standard values for one of its primary variables--metabolic rate--are based on an average male, and may overestimate female metabolic rate by up to 35% (ref. ). This may cause buildings to be intrinsically non-energy-efficient in providing comfort to females. Therefore, we make a case to use actual metabolic rates. Moreover, with a biophysical analysis we illustrate the effect of miscalculating metabolic rate on female thermal demand. The approach is fundamentally different from current empirical thermal comfort models and builds up predictions from the physical and physiological constraints, rather than statistical association to thermal comfort. It provides a substantiation of the thermal comfort standard on the population level and adds flexibility to predict thermal demand of subpopulations and individuals. Ultimately, an accurate representation of thermal demand of all occupants leads to actual energy consumption predictions and real energy savings of buildings that are designed and operated by the buildings services community.

  20. Recent trends of energy consumption and air pollution in China

    SciTech Connect

    Tian, H.Z.; Hao, J.M.; Hu, M.Y.; Nie, Y.F.

    2007-03-15

    The relationship between air pollution and energy consumption is a hot topic that is receiving increased attention by industry, regulatory agencies, as well as the public. China is currently undergoing a profound economic and social transition. Since the late 1990s, China's energy production and consumption have undergone an unexpectedly precipitous up-and-down fluctuation, and the related air pollution has changed dramatically. In this study, energy use and the related air pollution during the past years are analyzed and discussed in detail. Further, suggestions on sustainable energy use, air pollution control, as well as CO{sub 2}, abatement are proposed. By 2003, the total primary energy consumption of China had reached 1678.00 million tons (MT) of standard coal equivalent. As a result, emissions of SO{sub 2}, and NOx increased to 21.58 and 16.13 MT in 2003, respectively. Acid rain pollution worsened nationwide after 2000, with the areas of acid rain remaining stable while some seriously acid rain polluted areas worsened. This implies that more rigorous regulations, standards, and effective economic policies are needed.

  1. Characteristics of sunflower seed drying and microwave energy consumption

    NASA Astrophysics Data System (ADS)

    Darvishi, H.; Hadi Khoshtaghaza, M.; Najafi, G.; Zarein, M.

    2013-03-01

    The effect of the microwave-convective drying technique on the moisture ratio, drying rate, drying time, effective moisture diffusivity, microwave specific energy consumption, and energy efficiency of sunflower seedswere investigated.Drying took place in the falling rate period. Increasing the microwave power caused a significant decrease in the drying time. The drying data were fitted to four thin-layer drying models. The performance of these models was compared using the coefficient of determination, reduced chi-square and root mean square error between the observed and predicted moisture ratios. The results showed that the Page model was found to satisfactorily describe themicrowave-convective drying curves of sunflower seeds. The effective moisture diffusivity values were estimated from Fick diffusion model and varied from 1.73 10-7 to 4.76 10-7m2s-1. Increasing the microwave power resulted in a considerable increase in drying efficiency and a significant decrease in microwave specific energy consumption. The highest energy efficiency and the lowestmicrowave specific energy consumption were obtained at the microwave power of 300 W.

  2. DuPont cuts energy consumption 8% -- for starters

    SciTech Connect

    Wiseman, K.

    1998-07-01

    DuPont`s Corporate Energy Leadership Team (CELT) faced a difficult challenge at its inception in 1991--reducing the industry giant`s $900 million annual domestic energy bill. Seven years later, DuPont`s annual energy costs are down to $800 million, and energy consumption has shrunk by more than 8%. The team is on track toward future reduction goals. Key to persuading the company was the team`s 1992 Jump Start commitment to reduce out-of-pocket energy expenditures immediately. Over a four-month period, the goal was to save $6 million out-of-pocket on energy costs. The company actually ended up doubling that, saving over $12 million. The greatest savings--26% of the total--came from shutting down spare or unneeded equipment. Equipment tune-ups to improve performance and renegotiation of fuel contracts also lowered energy costs. The paper discusses how it was done.

  3. Energy Drink Consumption: Beneficial and Adverse Health Effects

    PubMed Central

    Alsunni, Ahmed Abdulrahman

    2015-01-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carried out to identify and discuss the published articles that examined the beneficial and adverse health effects related to energy drink. It is concluded that although energy drink may have beneficial effects on physical performance, these products also have possible detrimental health consequences. Marketing of energy drinks should be limited or forbidden until independent research confirms their safety, particularly among adolescents. PMID:26715927

  4. Energy Drink Consumption: Beneficial and Adverse Health Effects.

    PubMed

    Alsunni, Ahmed Abdulrahman

    2015-10-01

    Consumption of energy drinks has been increasing dramatically in the last two decades, particularly amongst adolescents and young adults. Energy drinks are aggressively marketed with the claim that these products give an energy boost to improve physical and cognitive performance. However, studies supporting these claims are limited. In fact, several adverse health effects have been related to energy drink; this has raised the question of whether these beverages are safe. This review was carried out to identify and discuss the published articles that examined the beneficial and adverse health effects related to energy drink. It is concluded that although energy drink may have beneficial effects on physical performance, these products also have possible detrimental health consequences. Marketing of energy drinks should be limited or forbidden until independent research confirms their safety, particularly among adolescents. PMID:26715927

  5. An analysis of residential energy consumption in a temperate climate

    SciTech Connect

    Clark, Y.Y.; Vincent, W.

    1987-06-01

    Electrical energy consumption data have been recorded for several hundred submetered residential structures in Middle Tennessee. All houses were constructed with a common energy package.'' Specifically, daily cooling usage data have been collected for 130 houses for the 1985 and 1986 cooling seasons, and monthly heating usage data for 186 houses have been recorded by occupant participation over a seven-year period. Cooling data have been analyzed using an SPSSx multiple regression analysis and results are compared to several cooling models. Heating, base, and total energy usage are also analyzed and regression correlation coefficients are determined as a function of several house parameters.

  6. Cardiovascular complications from consumption of high energy drinks: recent evidence.

    PubMed

    Chrysant, S G; Chrysant, G S

    2015-02-01

    The energy drinks (ED) are caffeinated beverages that are popular among teenagers and young adults. They are aggressively marketed as providing alertness, energy and sex prowess. The EDs in addition to caffeine contain several plant stimulants and simple sugars, which increase their caloric content. The caffeine concentration in these drinks is high and their overconsumption could lead to insomnia, agitation, tremors and cardiovascular complications including sudden death. Alcohol is often mixed with EDs (AMEDs) in the wrong perception that the caffeine in the EDs will prevent the drowsiness and sleepiness from alcohol and allow the person to consume more alcohol. This false perception, could lead to alcohol intoxication and the taking of risky decisions, like driving under the influence of alcohol and the risk of serious physical harm to themselves and others. To prevent the problem of consumption of EDs and AMEDs, the caring physician could help by advising the parents and his young patients about the serious health risks from the consumption of these drinks. In order to grasp the extend of the problem of ED and AMED consumption, we did a Medline search of the English language literature from January 2010 to December 2013, using the terms EDs and alcohol-mixed EDs. All the findings from the recent studies regarding the cardiovascular complications from the consumption of EDs and AMEDs together with collateral literature will be discussed in this review.

  7. Question 7: Optimized Energy Consumption for Protein Synthesis

    NASA Astrophysics Data System (ADS)

    Szaflarski, Witold; Nierhaus, Knud H.

    2007-10-01

    In our previous contribution (Nierhaus, Orig Life Evol Biosph, this volume, 2007) we mentioned that life had solved the problem of energy supply in three major steps, and that these steps also mark major stages during the development of life. We further outlined a possible scenario concerning a minimal translational apparatus focusing on the essential components necessary for protein synthesis. Here we continue that consideration by addressing on one of the main problems of early life, namely avoiding wasteful energy loss. With regard to the limiting energy supply of early living systems, i.e. those of say more than 3,000 Ma, a carefully controlled and product oriented energy consumption was in demand. In recent years we learned how a bacterial cell avoids energy drain, thus being able to pump most of the energy into protein synthesis. These lessons must be followed by the design of a minimal living system, which is surveyed in this short article.

  8. Lighting energy consumption trends and R&D opportunities

    NASA Astrophysics Data System (ADS)

    Brodrick, James R.; Petrow, Edward D.; Scholand, Michael J.

    2002-11-01

    Electric lighting of buildings in the United States consumes over 20% of the nation's primary electricity and is second only in magnitude to heating, ventilation and air conditioning systems. This installed lighting base is generally inefficient and is characterized by relatively low performance especially when compared to other building systems. While substantial opportunities for improving overall lighting system efficiency exist, the pathway to achievement of this goal is less clear. Lighting research and development conducted by the US Department of Energy's (DOE), Office of Energy Efficiency and Renewable Energy's (EERE), Building Technologies Program (BT) addresses this national issue and aggressively pursues a number of broad research areas that promise to yield significant increases in overall lighting system efficiency. Implementation of a successful program in lighting energy conservation depends upon a detailed assessment of energy consumption trends by lighting technology. The results of several years of research are presented that describe electricity consumption by market sector, application and lamp type. Following this lighting market assessment, an overview of the DOE's ongoing lighting research and development (LR&D) program portfolio linked to the market assessments is provided. Individual program contributions toward achieving ambitious lighting energy conservation goals are described. The BTS portfolio includes research in three broad areas: (1) light source and electronics, (2) fixtures, controls and distribution systems, and (3) human factors. An overview of each technical objective is provided, as well as a timeline for achieving specific energy conservation goals.

  9. Potential impact of doubling atmospheric carbon dioxide on energy consumption in the US

    SciTech Connect

    Munoz, J.R.; Sailor, D.J.

    1997-11-01

    This paper uses models of monthly electricity and natural gas per capita demand to forecast the effects of a global warming scenario. An extensive study of energy consumption sensitivity to climate in eight of the most energy intensive states of the US is briefly summarized. Models of statewide monthly per capita electricity consumption as a function of cooling degree days, heating degree days, enthalpy latent days and wind speed were developed. Similar models were developed for natural gas using temperature as the only independent variable. Population weighted statewide monthly cooling and heating degree days were calculated using the base climatic year and the general circulation model (GCM) predictions for California, Texas, New York, and Illinois. The expected changes were clearly dependent on the model chosen for the global warming forecast. The effects of the predicted changes in cooling degree days and heating degree days generated the typical saddle shape of the estimated changes in per capita electricity use. This is attributed to shifts from predominant heating requirements to predominant cooling requirements in certain months. The shape of the climatically induced decrease in natural gas consumption was expected and also highly dependent on the GCM chosen. It appears that per capita energy consumption could be affected significantly under global warming. Since heating and cooling are provided by different energy sources, there could be significant consequences for energy delivery systems. 8 refs., 2 figs.

  10. Study of unconventional aircraft engines designed for low energy consumption

    NASA Technical Reports Server (NTRS)

    Gray, D. E.

    1976-01-01

    Declining U.S. oil reserves and escalating energy costs underline the need for reducing fuel consumption in aircraft engines. The most promising unconventional aircraft engines based on their potential for fuel savings and improved economics are identified. The engines installed in both a long-range and medium-range aircraft were evaluated. Projected technology advances are identified and evaluated for their state-of-readiness for application to a commercial transport. Programs are recommended for developing the necessary technology.

  11. Model of US Army Materiel Command (AMC) energy consumption. Volume 1. Development of monthly energy-consumption equations. Final report

    SciTech Connect

    Sliwinski, B.J.

    1986-03-01

    This report describes the development of equations to relate monthly energy consumption at U.S. Army Materiel Command (AMC) installations to weather and process parameters. Equations were developed using multiple linear regression analysis for the Armament Munitions and Chemical Command (AMCCOM) and Depot Systems Command (DESCOM) major subcommands of AMC. Multiple regression analysis is the process of fitting a curve to a set of data points. This technique, commonly known as least-squares curve fitting, is based on minimizing the sum of the squares of the errors between the data and the fitted equation. Once the regression analysis is performed, it is possible to generate confidence limits about the fitted equation. For example, the 95% confidence limits determine the range of data values that will fall within the limits 95% of the time. The confidence limits are useful in making statistically valid statements about the meaning of future observations. Accuracies of both the individual and the command-level equations are described, and examples for calculating confidence limits of the equations are given. Results in using the equations to predict AMCCOM and DESCOM total energy consumption indicate they provide a useful tool for managing AMC energy use. Lumped data regression was used to analyze energy-consumption data for AMCCOM, and the efforts are now under way to apply it to DESCOM data.

  12. Energy consumption quota management of Wanda commercial buildings in China

    NASA Astrophysics Data System (ADS)

    Sun, D. B.; Xiao, H.; Wang, X.; Liu, J. J.; Wang, X.; Jin, X. Q.; Wang, J.; Xie, X. K.

    2016-08-01

    There is limited research of commercial buildings’ energy use data conducted based on practical analysis in China nowadays. Some energy consumption quota tools like Energy Star in U.S or VDI 3807 in Germany have limitation in China's building sector. This study introduces an innovative methodology of applying energy use quota model and empirical management to commercial buildings, which was in accordance of more than one hundred opened shopping centers of a real estate group in China. On the basis of statistical benchmarking, a new concept of “Modified coefficient”, which considers weather, occupancy, business layout, operation schedule and HVAC efficiency, is originally introduced in this paper. Our study shows that the average energy use quota increases from north to south. The average energy use quota of sample buildings is 159 kWh/(m2.a) of severe cold climate zone, 179 kWh/(m2.a) of cold zone, 188 kWh/(m2.a) of hot summer and cold winter zone, and 200 kWh/(m2.a) of hot summer and warm winter zone. The energy use quota model has been validated in the property management for year 2016, providing a new method of commercial building energy management to the industry. As a key result, there is 180 million energy saving potential based on energy quota management in 2016, equals to 6.2% saving rate of actual energy use in 2015.

  13. Computer simulated building energy consumption for verification of energy conservation measures in network facilities

    NASA Technical Reports Server (NTRS)

    Plankey, B.

    1981-01-01

    A computer program called ECPVER (Energy Consumption Program - Verification) was developed to simulate all energy loads for any number of buildings. The program computes simulated daily, monthly, and yearly energy consumption which can be compared with actual meter readings for the same time period. Such comparison can lead to validation of the model under a variety of conditions, which allows it to be used to predict future energy saving due to energy conservation measures. Predicted energy saving can then be compared with actual saving to verify the effectiveness of those energy conservation changes. This verification procedure is planned to be an important advancement in the Deep Space Network Energy Project, which seeks to reduce energy cost and consumption at all DSN Deep Space Stations.

  14. Muscle Synergies Heavily Influence the Neural Control of Arm Endpoint Stiffness and Energy Consumption

    PubMed Central

    Inouye, Joshua M.; Valero-Cuevas, Francisco J.

    2016-01-01

    Much debate has arisen from research on muscle synergies with respect to both limb impedance control and energy consumption. Studies of limb impedance control in the context of reaching movements and postural tasks have produced divergent findings, and this study explores whether the use of synergies by the central nervous system (CNS) can resolve these findings and also provide insights on mechanisms of energy consumption. In this study, we phrase these debates at the conceptual level of interactions between neural degrees of freedom and tasks constraints. This allows us to examine the ability of experimentally-observed synergies—correlated muscle activations—to control both energy consumption and the stiffness component of limb endpoint impedance. In our nominal 6-muscle planar arm model, muscle synergies and the desired size, shape, and orientation of endpoint stiffness ellipses, are expressed as linear constraints that define the set of feasible muscle activation patterns. Quadratic programming allows us to predict whether and how energy consumption can be minimized throughout the workspace of the limb given those linear constraints. We show that the presence of synergies drastically decreases the ability of the CNS to vary the properties of the endpoint stiffness and can even preclude the ability to minimize energy. Furthermore, the capacity to minimize energy consumption—when available—can be greatly affected by arm posture. Our computational approach helps reconcile divergent findings and conclusions about task-specific regulation of endpoint stiffness and energy consumption in the context of synergies. But more generally, these results provide further evidence that the benefits and disadvantages of muscle synergies go hand-in-hand with the structure of feasible muscle activation patterns afforded by the mechanics of the limb and task constraints. These insights will help design experiments to elucidate the interplay between synergies and the

  15. Future U.S. water consumption : The role of energy production.

    SciTech Connect

    Elcock, D.; Environmental Science Division

    2010-06-01

    This study investigates how meeting domestic energy production targets for both fossil and renewable fuels may affect future water demand. It combines projections of energy production developed by the U.S. Department of Energy with estimates of water consumption on a per-unit basis (water-consumption coefficients) for coal, oil, gas, and biofuels production, to estimate and compare the domestic freshwater consumed. Although total domestic freshwater consumption is expected to increase by nearly 7% between 2005 and 2030, water consumed for energy production is expected to increase by nearly 70%, and water consumed for biofuels (biodiesel and ethanol) production is expected to increase by almost 250%. By 2030, water consumed in the production of biofuels is projected to account for nearly half of the total amount of water consumed in the production of all energy fuels. Most of this is for irrigation, and the West North Central Region is projected to consume most of this water in 2030. These findings identify an important potential future conflict between renewable energy production and water availability that warrants further investigation and action to ensure that future domestic energy demand can be met in an economically efficient and environmentally sustainable manner.

  16. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Test procedures for measuring energy consumption of distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY... § 431.193 Test procedures for measuring energy consumption of distribution transformers. The...

  17. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Test procedures for measuring energy consumption of distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY... § 431.193 Test procedures for measuring energy consumption of distribution transformers. The...

  18. Solar Adoption and Energy Consumption in the Residential Sector

    NASA Astrophysics Data System (ADS)

    McAllister, Joseph Andrew

    This dissertation analyzes the energy consumption behavior of residential adopters of solar photovoltaic systems (solar-PV). Based on large data sets from the San Diego region that have been assembled or otherwise acquired by the author, the dissertation quantifies changes in energy consumption after solar-PV installation and determines whether certain household characteristics are correlated with such changes. In doing so, it seeks to answer two related questions: First, "Do residential solar adopters increase or decrease their electricity consumption after they install a solar-PV system?" Assuming that certain categories of residential adopters increase and others decrease, the second question is "Which residential adopters increase and which decrease their consumption and why?" The database that was used to conduct this analysis includes information about 5,243 residential systems in San Diego Gas & Electric's (SDG&E) service territory installed between January 2007 and December 2010. San Diego is a national leader in the installation of small-scale solar-electric systems, with over 12,000 systems in the region installed as of January 2012, or around 14% of the total number installed in California. The author performed detailed characterization of a significant subset of the solar installations in the San Diego region. Assembled data included technical and economic characteristics of the systems themselves; the solar companies that sold and installed them; individual customer electric utility billing data; metered PV production data for a subgroup of these solar systems; and data about the properties where the systems are located. Primarily, the author was able to conduct an electricity consumption analysis at the individual household level for 2,410 PV systems installed in SDG&E service territory between January 2007 and December 2010. This analysis was designed to detect changes in electricity consumption from the pre-solar to the post-installation period. To

  19. Water consumption patterns and factors contributing to water consumption in arsenic affected population of rural West Bengal, India.

    PubMed

    Hossain, M Amir; Rahman, Mohammad Mahmudur; Murrill, Matthew; Das, Bhaskar; Roy, Bimol; Dey, Shankar; Maity, Debasish; Chakraborti, Dipankar

    2013-10-01

    A direct water intake study was conducted for one year, involving 423 individuals from three arsenic (As) affected villages of West Bengal, India. Average direct water intake per person and per unit body weight was found to be 3.12±1.17 L/day and 78.07±47.08 mL/kg/day (± SD), respectively. Average direct water intakes for adult males, adult females and children (age <15 years) were 3.95, 3.03 and 2.14 L/day, respectively. Significant sex differentials were observed between ages 16-55 years. For all participants, a sharp increase in water intake up to 15 years of age was observed followed by a plateau at a higher intake level. Significant monthly, seasonal, regional, and occupational variability was also observed. Another study involving 413 subjects determined the amount of indirect water intake. Average indirect water intake per person was 1.80±0.64 L/day; for adult males, adult females and children, intake was 2.15, 1.81, and 1.10 L/day, respectively. Average total (direct + indirect) water intake was 4.92 L/person/day; for adult males, adult females and children, total intake was 6.10, 4.84, and 3.24 L/person/day, respectively. The overall contribution of indirect water intake to total water consumption was 36.6% for all participants. This study additionally elucidated several factors that contribute to variable water intake, which can lead to better risk characterization of subpopulations and water contaminant ingestion. The study reveals that the water intake rates in the three studied populations in West Bengal are greater than the assumed water intake rates utilized by the World Health Organization (WHO) in the establishment of drinking water quality guidelines; therefore, these assumed intake values may be inappropriate for the study population as well as similar ones.

  20. Water consumption patterns and factors contributing to water consumption in arsenic affected population of rural West Bengal, India

    PubMed Central

    Hossain, M. Amir; Rahman, Mohammad Mahmudur; Murrill, Matthew; Das, Bhaskar; Roy, Bimol; Dey, Shankar; Maity, Debasish; Chakraborti, Dipankar

    2014-01-01

    A direct water intake study was conducted for one year, involving 423 individuals from arsenic (As) affected villages of West-Bengal, India. Average direct water intake per person was found to be 3.12±1.17 L/day and 78.07±47.08 mL/kg/day (±SD). Average direct water intakes for adult males, adult females and children (age <15 years) were 3.95, 3.03 and 2.14 L/day, respectively. Significant sex differentials were observed between ages 16–55 years. For all participants, a sharp increase in water intake up to age 15 years was observed followed by a plateau at a higher intake level. Significant monthly, seasonal, regional, and occupational variability was also observed. Another study involving 413 subjects determined the amount of indirect water intake. Average indirect water intake per person was 1.80±0.64 L/day; for adult males, females and children, intake was 2.15, 1.81, and 1.10 L/day, respectively. Average total (direct + indirect) water intake was 4.92 L/person/day; for adult males, females and children total intake was 6.10, 4.84, and 3.24 L/person/day, respectively. The overall contribution of indirect water intake to total water consumption is 36.6% for all participants. This study additionally elucidated several factors that contribute to variable water intake, which can lead to better risk characterization of subpopulations and water contaminant ingestion. The study reveals that the water intake rates in the three studied populations in West Bengal are greater than the assumed water intake rates utilized by the World Health Organization (WHO) in the establishment of drinking water quality guidelines; therefore, these assumed intake values may be inappropriate for the study population as well as similar ones. PMID:22858413

  1. The federal energy policy: An example of its potential impact on energy consumption and expenditures in minority and poor households

    SciTech Connect

    Poyer, D.A.

    1991-09-01

    This report presents an analysis of the relative impacts of the National Energy Strategy on majority and minority households and on nonpoor and poor households. (Minority households are defined as those headed by black or Hispanic persons; poor households are defined as those having combined household income less than or equal to 125% of the Office of Management and Budget`s poverty-income threshold.) Energy consumption and expenditures, and projected energy expenditures as a share of income, for the period 1987 to 2009 are reported. Projected consumptions of electricity and nonelectric energy over this period are also reported for each group. An analysis of how these projected values are affected under different housing growth scenarios is performed. The analysis in this report presents a preliminary set of projections generated under a set of simplifying assumptions. Future analysis will rigorously assess the sensitivity of the projected values to various changes in a number of these assumptions.

  2. Three essays in energy consumption: Time series analyses

    NASA Astrophysics Data System (ADS)

    Ahn, Hee Bai

    1997-10-01

    Firstly, this dissertation investigates that which demand specification is an appropriate model for long-run energy demand between the conventional demand specification and the limited demand specification. In order to determine the components of a stable long-run demand for different sectors of the energy industry, I perform cointegration tests by using the Johansen test procedure. First, I test the conventional demand specification including prices and income as components. Second, I test a limited demand specification only income as a component. The reason for performing these tests is that we can determine that which demand specification is a good long-run predictor of energy consumption between the two demand specifications by using the cointegration tests. Secondly, for the purpose of planning and forecasting energy demand in case of cointegrated system, long-run elasticities are of particular interest. To retrieve the optimal level of energy demand in case of price shock, we need long-run elasticities rather than short-run elasticities. The energy demand study provides valuable information to the energy policy makers who are concerned about the long-run impact of taxes and tariffs. A long-run price elasticity is a primary barometer of the substitution effect between energy and non-energy inputs and long-run income elasticity is an important factor since we can measure the energy demand growing slowly or fast than in the past depending on the magnitude of long-run elasticity. The one other problem in estimating the total energy demand is that there exists an aggregation bias stemming from the process of summation in four different energy types for the total aggregation prices and total aggregation energy consumption. In order to measure the aggregation bias between the Btu aggregation method and the Divisia Index method, i.e., which methodology has less aggregation bias in the long-run, I compare the two estimation results with calculated results estimated on

  3. Controlled cooling of an electronic system for reduced energy consumption

    DOEpatents

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-08-09

    Energy efficient control of a cooling system cooling an electronic system is provided. The control includes automatically determining at least one adjusted control setting for at least one adjustable cooling component of a cooling system cooling the electronic system. The automatically determining is based, at least in part, on power being consumed by the cooling system and temperature of a heat sink to which heat extracted by the cooling system is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on one or more experimentally obtained models relating the targeted temperature and power consumption of the one or more adjustable cooling components of the cooling system.

  4. Household energy and consumption and expenditures, 1990. [Contains Division, Census Region, and Climate Zone maps

    SciTech Connect

    Not Available

    1993-03-02

    The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990.

  5. Lifestyle factors affecting fruit and vegetable consumption in the UK Women's Cohort Study.

    PubMed

    Pollard, J; Greenwood, D; Kirk, S; Cade, J

    2001-08-01

    The UK Women's Cohort Study (UKWCS) was originally set up to look at morbidity and mortality data on subjects with a wide range of dietary intakes including vegans, lacto-ovo vegetarians, non-red meat eaters and red meat eaters. The aim of the present study was to investigate factors that affect fruit and vegetable consumption within this particular cohort of women. Females of ages 35-69 years, taking part in the UK Women's Cohort Study (N=35 367), provided health and lifestyle information including a 217-item food frequency questionnaire. In multiple logistic regression, the strongest predictors of a higher reported level of fruit and vegetable consumption were being a vegetarian or vegan, taking vitamin or mineral supplements, being married, educated to A-level or degree level and belonging to a higher socio-economic group. Conversely, smokers were found to be only half as likely as non-smokers to be high fruit and vegetable consumers. These lifestyle distinctions among three levels of reported fruit and vegetable consumption are relevant to the future targeting of health promotion strategies.

  6. Protective role of taurine in developing offspring affected by maternal alcohol consumption

    PubMed Central

    Ananchaipatana-Auitragoon, Pilant; Ananchaipatana-Auitragoon, Yutthana; Siripornpanich, Vorasith; Kotchabhakdi, Naiphinich

    2015-01-01

    Maternal alcohol consumption is known to affect offspring growth and development, including growth deficits, physical anomalies, impaired brain functions and behavioral disturbances. Taurine, a sulfur-containing amino acid, is essential during development, and continually found to be protective against neurotoxicity and various tissue damages including those from alcohol exposure. However, it is still unknown whether taurine can exert its protection during development of central nervous system and whether it can reverse alcohol damages on developed brain later in life. This study aims to investigate protective roles of taurine against maternal alcohol consumption on growth and development of offspring. The experimental protocol was conducted using ICR-outbred pregnant mice given 10 % alcohol, with or without maternal taurine supplementation during gestation and lactation. Pregnancy outcomes, offspring mortality and successive bodyweight until adult were monitored. Adult offspring is supplemented taurine to verify its ability to reverse damages on learning and memory through a water maze task performance. Our results demonstrate that offspring of maternal alcohol exposure, together with maternal taurine supplementation show conserved learning and memory, while that of offspring treated taurine later in life are disturbed. Taurine provides neuroprotective effects and preserves learning and memory processes when given together with maternal alcohol consumption, but not shown such effects when given exclusively in offspring. PMID:26648819

  7. Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

    NASA Astrophysics Data System (ADS)

    Carlson, Derrick R.

    While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

  8. Relative Preference and Localized Food Affect Predator Space Use and Consumption of Incidental Prey.

    PubMed

    Schartel, Tyler E; Schauber, Eric M

    2016-01-01

    Abundant, localized foods can concentrate predators and their foraging efforts, thus altering both the spatial distribution of predation risk and predator preferences for prey that are encountered incidentally. However, few investigations have quantified the spatial scale over which localized foods affect predator foraging behavior and consumption of incidental prey. In spring 2010, we experimentally tested how point-source foods altered how generalist predators (white-footed mice, Peromyscus leucopus) utilized space and depredated two incidental prey items: almonds (Prunus dulcis; highly profitable) and maple seeds (Acer saccharum; less profitable). We estimated mouse population densities with trapping webs, quantified mouse consumption rates of these incidental prey items, and measured local mouse activity with track plates. We predicted that 1) mouse activity would be elevated near full feeders, but depressed at intermediate distances from the feeder, 2) consumption of both incidental prey would be high near feeders providing less-preferred food and, 3) consumption of incidental prey would be contingent on predator preference for prey relative to feeders providing more-preferred food. Mouse densities increased significantly from pre- to post-experiment. Mean mouse activity was unexpectedly greatest in control treatments, particularly <15 m from the control (empty) feeder. Feeders with highly preferred food (sunflower seeds) created localized refuges for incidental prey at intermediate distances (15 to 25m) from the feeder. Feeders with less-preferred food (corn) generated localized high risk for highly preferred almonds <10 m of the feeder. Our findings highlight the contingent but predictable effects of locally abundant food on risk experienced by incidental prey, which can be positive or negative depending on both spatial proximity and relative preference.

  9. Relative Preference and Localized Food Affect Predator Space Use and Consumption of Incidental Prey.

    PubMed

    Schartel, Tyler E; Schauber, Eric M

    2016-01-01

    Abundant, localized foods can concentrate predators and their foraging efforts, thus altering both the spatial distribution of predation risk and predator preferences for prey that are encountered incidentally. However, few investigations have quantified the spatial scale over which localized foods affect predator foraging behavior and consumption of incidental prey. In spring 2010, we experimentally tested how point-source foods altered how generalist predators (white-footed mice, Peromyscus leucopus) utilized space and depredated two incidental prey items: almonds (Prunus dulcis; highly profitable) and maple seeds (Acer saccharum; less profitable). We estimated mouse population densities with trapping webs, quantified mouse consumption rates of these incidental prey items, and measured local mouse activity with track plates. We predicted that 1) mouse activity would be elevated near full feeders, but depressed at intermediate distances from the feeder, 2) consumption of both incidental prey would be high near feeders providing less-preferred food and, 3) consumption of incidental prey would be contingent on predator preference for prey relative to feeders providing more-preferred food. Mouse densities increased significantly from pre- to post-experiment. Mean mouse activity was unexpectedly greatest in control treatments, particularly <15 m from the control (empty) feeder. Feeders with highly preferred food (sunflower seeds) created localized refuges for incidental prey at intermediate distances (15 to 25m) from the feeder. Feeders with less-preferred food (corn) generated localized high risk for highly preferred almonds <10 m of the feeder. Our findings highlight the contingent but predictable effects of locally abundant food on risk experienced by incidental prey, which can be positive or negative depending on both spatial proximity and relative preference. PMID:26978659

  10. How economic crises affect alcohol consumption and alcohol-related health problems: a realist systematic review.

    PubMed

    de Goeij, Moniek C M; Suhrcke, Marc; Toffolutti, Veronica; van de Mheen, Dike; Schoenmakers, Tim M; Kunst, Anton E

    2015-04-01

    Economic crises are complex events that affect behavioral patterns (including alcohol consumption) via opposing mechanisms. With this realist systematic review, we aimed to investigate evidence from studies of previous or ongoing crises on which mechanisms (How?) play a role among which individuals (Whom?). Such evidence would help understand and predict the potential impact of economic crises on alcohol consumption. Medical, psychological, social, and economic databases were used to search for peer-reviewed qualitative or quantitative empirical evidence (published January 1, 1990-May 1, 2014) linking economic crises or stressors with alcohol consumption and alcohol-related health problems. We included 35 papers, based on defined selection criteria. From these papers, we extracted evidence on mechanism(s), determinant, outcome, country-level context, and individual context. We found 16 studies that reported evidence completely covering two behavioral mechanisms by which economic crises can influence alcohol consumption and alcohol-related health problems. The first mechanism suggests that psychological distress triggered by unemployment and income reductions can increase drinking problems. The second mechanism suggests that due to tighter budget constraints, less money is spent on alcoholic beverages. Across many countries, the psychological distress mechanism was observed mainly in men. The tighter budget constraints mechanism seems to play a role in all population subgroups across all countries. For the other three mechanisms (i.e., deterioration in the social situation, fear of losing one's job, and increased non-working time), empirical evidence was scarce or absent, or had small to moderate coverage. This was also the case for important influential contextual factors described in our initial theoretical framework. This realist systematic review suggests that among men (but not among women), the net impact of economic crises will be an increase in harmful

  11. Relative Preference and Localized Food Affect Predator Space Use and Consumption of Incidental Prey

    PubMed Central

    Schartel, Tyler E.; Schauber, Eric M.

    2016-01-01

    Abundant, localized foods can concentrate predators and their foraging efforts, thus altering both the spatial distribution of predation risk and predator preferences for prey that are encountered incidentally. However, few investigations have quantified the spatial scale over which localized foods affect predator foraging behavior and consumption of incidental prey. In spring 2010, we experimentally tested how point-source foods altered how generalist predators (white-footed mice, Peromyscus leucopus) utilized space and depredated two incidental prey items: almonds (Prunus dulcis; highly profitable) and maple seeds (Acer saccharum; less profitable). We estimated mouse population densities with trapping webs, quantified mouse consumption rates of these incidental prey items, and measured local mouse activity with track plates. We predicted that 1) mouse activity would be elevated near full feeders, but depressed at intermediate distances from the feeder, 2) consumption of both incidental prey would be high near feeders providing less-preferred food and, 3) consumption of incidental prey would be contingent on predator preference for prey relative to feeders providing more-preferred food. Mouse densities increased significantly from pre- to post-experiment. Mean mouse activity was unexpectedly greatest in control treatments, particularly <15 m from the control (empty) feeder. Feeders with highly preferred food (sunflower seeds) created localized refuges for incidental prey at intermediate distances (15 to 25m) from the feeder. Feeders with less-preferred food (corn) generated localized high risk for highly preferred almonds <10 m of the feeder. Our findings highlight the contingent but predictable effects of locally abundant food on risk experienced by incidental prey, which can be positive or negative depending on both spatial proximity and relative preference. PMID:26978659

  12. Annual Energy Consumption Analysis Report for Richland Middle School

    SciTech Connect

    Liu, Bing

    2003-12-18

    Richland Middle School is a single story, 90,000 square feet new school located in Richland, WA. The design team proposed four HVAC system options to serve the building. The proposed HVAC systems are listed as following: (1) 4-pipe fan coil units served by electrical chiller and gas-fired boilers, (2) Ground-source closed water loop heat pumps with water loop heat pumps with boiler and cooling tower, and (3) VAV system served by electrical chiller and gas-fired boiler. This analysis estimates the annual energy consumptions and costs of each system option, in order to provide the design team with a reasonable basis for determining which system is most life-cycle cost effective. eQuest (version 3.37), a computer-based energy simulation program that uses the DOE-2 simulation engine, was used to estimate the annual energy costs.

  13. Trends in energy use in commercial buildings -- Sixteen years of EIA's commercial buildings energy consumption survey

    SciTech Connect

    Davis, J.; Swenson, A.

    1998-07-01

    The Commercial Buildings Energy Consumption Survey (CBECS) collects basic statistical information on energy consumption and energy-related characteristics of commercial buildings in the US. The first CBECS was conducted in 1979 and the most recent was completed in 1995. Over that period, the number of commercial bindings and total amount of floorspace increased, total consumption remained flat, and total energy intensity declined. By 1995, there were 4.6 million commercial buildings and 58.8 billion square feet of floorspace. The buildings consumed a total of 5.3 quadrillion Btu (site energy), with a total intensity of 90.5 thousand Btu per square foot per year. Electricity consumption exceeded natural gas consumption (2.6 quadrillion and 1.9 quadrillion Btu, respectively). In 1995, the two major users of energy were space heating (1.7 quadrillion Btu) and lighting (1.2 quadrillion Btu). Over the period 1979 to 1995, natural gas intensity declined from 71.4 thousand to 51.0 thousand Btu per square foot per year. Electricity intensity did not show a similar decline (44.2 thousand Btu per square foot in 1979 and 45.7 thousand Btu per square foot in 1995). Two types of commercial buildings, office buildings and mercantile and service buildings, were the largest consumers of energy in 1995 (2.0 quadrillion Btu, 38% of total consumption). Three building types, health care, food service, and food sales, had significantly higher energy intensities. Buildings constructed since 1970 accounted for half of total consumption and a majority (59%) of total electricity consumption.

  14. Sample design for the residential energy consumption survey

    SciTech Connect

    Not Available

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  15. Identifying and analyzing methods for reducing the energy consumption of helicopters

    NASA Technical Reports Server (NTRS)

    Davis, S. J.; Rosenstein, H. J.

    1976-01-01

    Reductions in helicopter energy consumption can be accomplished through the use of advanced technology in the areas of powerplant design, improved rotor efficiency, reduced parasite drag, and reduced structural empty weight. Baseline helicopters incorporating technology were designed for a short range (200 n mi) and a very short haul (100 n mi) mission scenario. Parametric analyses were then conducted to determine the impact of technology improvement. Many of the parameters varied are interrelated. A summary of such interactions is presented, and some additional sensitivity values were added so that energy reduction and DOC as affected by the major technological factors or operational modes are clearly defined.

  16. TV Energy Consumption Trends and Energy-Efficiency Improvement Options

    SciTech Connect

    Park, Won Young; Phadke, Amol; Shah, Nihar; Letschert, Virginie

    2011-07-01

    The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in January 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden

  17. Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

    NASA Astrophysics Data System (ADS)

    Carlson, Derrick R.

    While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

  18. Energy in rural Ethiopia: Consumption patterns, associated problems, and prospects for a sustainable energy strategy

    SciTech Connect

    Mulugetta, Y.

    1999-07-01

    This paper provides a picture of energy resources and their current use in rural Ethiopia and presents an analysis of energy supply patterns and consumption trends. This exercise aims to build an empirical knowledge of real energy systems in the country and also to synthesize and analyze the general and specific problems that exist within the current energy system. Based on these lines of analysis, a series of technical and policy-oriented recommendations for rural energy development are discussed.

  19. Select Results from the Energy Assessor Experiment in the 2012 Commercial Buildings Energy Consumption Survey

    EIA Publications

    2015-01-01

    As part of an effort to make EIA’s energy consumption surveys as accurate and efficient as possible, EIA invited the National Research Council (NRC) to review the Commercial Buildings Energy Consumption Survey (CBECS) data-gathering process and make recommendations for improvements. The NRC suggested sending professional energy assessors to some sites and comparing the data obtained from the survey to the data collected by the assessors. Results from the energy assessment data collection have largely confirmed the quality of data gathered by CBECS interviewers.

  20. Predictive models of energy consumption in multi-family housing in College Station, Texas

    NASA Astrophysics Data System (ADS)

    Ali, Hikmat Hummad

    Patterns of energy consumption in apartment buildings are different than those in single-family houses. Apartment buildings have different physical characteristics, and their inhabitants have different demographic attributes. This study develops models that predict energy usage in apartment buildings in College Station. This is accomplished by analyzing and identifying the predictive variables that affect energy usage, studying the consumption patterns, and creating formulas based on combinations of these variables. According to the hypotheses and the specific research context, a cross-sectional design strategy is adopted. This choice implies analyses across variations within a sample of fourplex apartments in College Station. The data available for analysis include the monthly billing data along with the physical characteristics of the building, climate data for College Station, and occupant demographic characteristics. A simple random sampling procedure is adopted. The sample size of 176 apartments is drawn from the population in such a way that every possible sample has the same chance of being selected. Statistical methods used to interpret the data include univariate analysis (mean, standard deviation, range, and distribution of data), correlation analysis, regression analysis, and ANOVA (analyses of variance). The results show there are significant differences in cooling efficiency and actual energy consumption among different building types, but there are no significant differences in heating consumption. There are no significant differences in actual energy consumption between student and non-student groups or among ethnic groups. The findings indicate that there are significant differences in actual energy consumption among marital status groups and educational level groups. The multiple regression procedures show there is a significant relationship between normalized annual consumption and the combined variables of floor area, marital status, dead band

  1. Energy Drink Consumption and Cardiac Complications: A Case for Caution.

    PubMed

    Sattari, Maryam; Sattari, Anahita; Kazory, Amir

    2016-01-01

    We present a case of atrial fibrillation with rapid ventricular response in a 28-year-old previously healthy man in the context of daily consumption of 2 Monster energy drinks and 2 to 3 beers. We have obtained consent from this patient to present his case. Our observation adds to the developing literature describing an association between highly caffeinated drinks and adverse cardiovascular events. The previous cases in the literature and the proposed underlying mechanisms of this association are briefly discussed in this article. With the rising popularity of energy drinks, clinicians should be aware of their arrhythmogenic potential and consider screening for these products in patients who present with otherwise unexplained arrhythmias. PMID:27471919

  2. Baseline projections of transportation energy consumption by mode: 1981 update

    SciTech Connect

    Millar, M; Bunch, J; Vyas, A; Kaplan, M; Knorr, R; Mendiratta, V; Saricks, C

    1982-04-01

    A comprehensive set of activity and energy-demand projections for each of the major transportation modes and submodes is presented. Projections are developed for a business-as-usual scenario, which provides a benchmark for assessing the effects of potential conservation strategies. This baseline scenario assumes a continuation of present trends, including fuel-efficiency improvements likely to result from current efforts of vehicle manufacturers. Because of anticipated changes in fuel efficiency, fuel price, modal shifts, and a lower-than-historic rate of economic growth, projected growth rates in transportation activity and energy consumption depart from historic patterns. The text discusses the factors responsible for this departure, documents the assumptions and methodologies used to develop the modal projections, and compares the projections with other efforts.

  3. Evaluation of the impact of the surrounding urban morphology on building energy consumption

    SciTech Connect

    Wong, Nyuk Hien; Chen, Yixing; Hajadi, Norwin; Sathyanarayanan, Haripriya; Manickavasagam, Yamini Vidya; Jusuf, Steve Kardinal; Syafii, Nedyomukti Imam

    2011-01-15

    Empirical models of minimum (T{sub min}), average (T{sub avg}) and maximum (T{sub max}) air temperature for Singapore estate have been developed and validated based on a long-tem field measurement. There are three major urban elements, which influence the urban temperature at the local scale. Essentially, they are buildings, greenery and pavement. Other related parameters identified for the study, such as green plot ratio (GnPR), sky view factor (SVF), surrounding building density, the wall surface area, pavement area, albedo are also evaluated to give a better understanding on the likely impact of the modified urban morphology on energy consumption. The objective of this research is to assess and to compare how the air temperature variation of urban condition can affect the building energy consumption in tropical climate of Singapore. In order to achieve this goal, a series of numerical calculation and building simulation are utilized. A total of 32 cases, considering different urban morphologies, are identified and evaluated to give better a understanding on the implication of urban forms, with the reference to the effect of varying density, height and greenery density. The results show that GnPR, which related to the present of greenery, have the most significant impact on the energy consumption by reducing the temperature by up to 2 C. The results also strongly indicate an energy saving of 4.5% if the urban elements are addressed effectively. (author)

  4. Factors affecting the estimated probabilistic acute dietary exposure to captan from apple consumption.

    PubMed

    Zentai, A; Sali, J; Szabó, I J; Szeitzné-Szabó, M; Ambrus, A; Vásárhelyi, A

    2013-01-01

    The effect of the number of pesticide residue values below the LOQ/LOD of analytical methods, the variability of residues in individual fruits, mass of fruit units and the number of bootstrap iterations was studied on the probabilistically estimated acute exposure of consumers. The 4720 daily apple consumption data and the results of 1239 apple sample analyses for captan residues, performed within the Hungarian monitoring programme between 2005 and 2011, were used in this study as model matrix. Up to about 95th percentile exposure (µg/(kg bw·day)), simply multiplying each residue in composite samples with each consumption value gave similar estimates to those obtained with the complex procedure taking also into account the mass of and residues in individual fruits. However, the exposure above the 95th percentile calculated with the complex procedure gradually increased with increasing percentile level compared to the simple procedure. Including the high number of non-detects reduced the estimated exposure, which was the highest when only the residues measured in treated fruits were taken into account. The number of bootstrap iterations between 100 and 10,000 did not significantly affect the calculated exposure. The 99.99th percentile exposure amounted to 17.9% of the acute reference dose of 300 µg/(kg bw·day) for women of childbearing age.

  5. RECENT TRENDS IN EMERGING TRANSPORTATION FUELS AND ENERGY CONSUMPTION

    SciTech Connect

    Bunting, Bruce G

    2012-01-01

    Abundance of energy can be improved both by developing new sources of fuel and by improving efficiency of energy utilization, although we really need to pursue both paths to improve energy accessibility in the future. Currently, 2.7 billion people or 38% of the world s population do not have access to modern cooking fuel and depend on wood or dung and 1.4 billion people or 20% do not have access to electricity. It is estimated that correcting these deficiencies will require an investment of $36 billion dollars annually through 2030. In growing economies, energy use and economic growth are strongly linked, but energy use generally grows at a lower rate due to increased access to modern fuels and adaptation of modern, more efficient technology. Reducing environmental impacts of increased energy consumption such as global warming or regional emissions will require improved technology, renewable fuels, and CO2 reuse or sequestration. The increase in energy utilization will probably result in increased transportation fuel diversity as fuels are shaped by availability of local resources, world trade, and governmental, environmental, and economic policies. The purpose of this paper is to outline some of the recently emerging trends, but not to suggest winners. This paper will focus on liquid transportation fuels, which provide the highest energy density and best match with existing vehicles and infrastructure. Data is taken from a variety of US, European, and other sources without an attempt to normalize or combine the various data sources. Liquid transportation fuels can be derived from conventional hydrocarbon resources (crude oil), unconventional hydrocarbon resources (oil sands or oil shale), and biological feedstocks through a variety of biochemical or thermo chemical processes, or by converting natural gas or coal to liquids.

  6. Nonresidential buildings energy consumption survey: 1979 consumption and expenditures. Part 2. Steam, fuel oil, LPG, and all fuels

    SciTech Connect

    Patinkin, L.

    1983-12-01

    This report presents data on square footage and on total energy consumption and expenditures for commercial buildings in the contiguous United States. Also included are detailed consumption and expenditures tables for fuel oil or kerosene, liquid petroleum gas (LPG), and purchased steam. Commercial buildings include all nonresidential buildings with the exception of those where industrial activities occupy more of the total square footage than any other type of activity. 7 figures, 23 tables.

  7. Short-Term Energy Outlook Model Documentation: Motor Gasoline Consumption Model

    EIA Publications

    2011-01-01

    The motor gasoline consumption module of the Short-Term Energy Outlook (STEO) model is designed to provide forecasts of total U.S. consumption of motor gasolien based on estimates of vehicle miles traveled and average vehicle fuel economy.

  8. A Local Energy Consumption Prediction-Based Clustering Protocol for Wireless Sensor Networks

    PubMed Central

    Yu, Jiguo; Feng, Li; Jia, Lili; Gu, Xin; Yu, Dongxiao

    2014-01-01

    Clustering is a fundamental and effective technique for utilizing sensor nodes' energy and extending the network lifetime for wireless sensor networks. In this paper, we propose a novel clustering protocol, LECP-CP (local energy consumption prediction-based clustering protocol), the core of which includes a novel cluster head election algorithm and an inter-cluster communication routing tree construction algorithm, both based on the predicted local energy consumption ratio of nodes. We also provide a more accurate and realistic cluster radius to minimize the energy consumption of the entire network. The global energy consumption can be optimized by the optimization of the local energy consumption, and the energy consumption among nodes can be balanced well. Simulation results validate our theoretical analysis and show that LECP-CP has high efficiency of energy utilization, good scalability and significant improvement in the network lifetime. PMID:25479330

  9. Comfort, Indoor Air Quality, and Energy Consumption in Low Energy Homes

    SciTech Connect

    Engelmann, P.; Roth, K.; Tiefenbeck, V.

    2013-01-01

    This report documents the results of an in-depth evaluation of energy consumption and thermal comfort for two potential net zero-energy homes (NZEHs) in Massachusetts, as well as an indoor air quality (IAQ) evaluation performed in conjunction with Lawrence Berkeley National Laboratory (LBNL).

  10. Biodiesel Supply and Consumption in the Short-Term Energy Outlook

    EIA Publications

    2009-01-01

    The historical biodiesel consumption data published in the Energy Information Administration's Monthly Energy Review March 2009 edition were revised to account for imports and exports. Table 10.4 of the Monthly Energy Review was expanded to display biodiesel imports, exports, stocks, stock change, and consumption. Similar revisions were made in the April 2009 edition of the Short-Term Energy Outlook (STEO).

  11. Reduction in Energy Consumption for Pretreatment Process and Transportation of Pulverized Wood Fuel

    NASA Astrophysics Data System (ADS)

    Nishi, Kenji; Sawai, Toru; Ohmasa, Mitsushi; Hirokawa, Noriyasu; Shibue, Tadashi; Kajimoto, Takeshi

    In recent years, much attention has been focused on the energy utilization of biomass to reduce the emission of greenhouse gas. Especially, woody biomass such as the forestry biomass derived from logging and thinning operations in forests is one of the most promising domestic resources in Japan. Woody biomass contributes not only to the improvement of energy self-sufficiency in Japan, but also to the environmental protection of Japanese forests. When the woody biomass is utilized, it is necessary to examine the energy consumption for collection of resources, pretreatment, transportation and after-treatment. In the present study, woody biomass is assumed to be utilized as pulverized wood fuel in local area. The pretreatment of pulverized wood fuel is consisted of three procedures; drying, semi-carbonizaion and fine comminution. The main purpose of the study is to investigate the comminution characteristic of the Japanese cedar thinning and the reduction in energy consumption for pretreatment process and transportation of pulverized wood fuel. The results obtained in the present study are as follows. (1) Comminution energy increases as the water content increases and the sieve of screen becomes small. The comminution energy of hammer mill is largely affected by the water content. Difference in comminution energy between the hammer and cutter mills is large. The ratio of comminution energy of the hammer mill to that of the cutter mill exceeds 10 for the water content of 40% and sieve of screen of 3mm. (2) To estimate the comminution energy of woody biomass, empirical equations of work index in Bond's Law are presented. In woody biomass region, the empirical equations of work index depend on the comminution method. In semi-carbonization and carbonization regions, the empirical equation of work index is presented regardless of comminution method and sieve of screen. The comminution energy can be estimated by using the present empirical equations within accuracy ±50

  12. Study of unconventional aircraft engines designed for low energy consumption

    NASA Technical Reports Server (NTRS)

    Neitzel, R. E.; Hirschkron, R.; Johnston, R. P.

    1976-01-01

    A study of unconventional engine cycle concepts, which may offer significantly lower energy consumption than conventional subsonic transport turbofans, is described herein. A number of unconventional engine concepts were identified and parametrically studied to determine their relative fuel-saving potential. Based on results from these studies, regenerative, geared, and variable-boost turbofans, and combinations thereof, were selected along with advanced turboprop cycles for further evaluation and refinement. Preliminary aerodynamic and mechanical designs of these unconventional engine configurations were conducted and mission performance was compared to a conventional, direct-drive turofan reference engine. Consideration is given to the unconventional concepts, and their state of readiness for application. Areas of needed technology advancement are identified.

  13. Household Energy Consumption: Community Context and the Fuelwood Transition*

    PubMed Central

    Link, Cynthia F.; Axinn, William G.; Ghimire, Dirgha J.

    2012-01-01

    We examine the influence of community context on change over time in households’ use of non-wood fuels. Our theoretical framework builds on sociological concepts in order to study energy consumption at the micro-level. The framework emphasizes the importance of nonfamily organizations and services in the local community as determinants of the transition from use of fuelwood to use of alternative fuels. We use multilevel longitudinal data on household fuel choice and community context from rural Nepal to provide empirical tests of our theoretical model. Results reveal that increased exposure to nonfamily organizations in the local community increases the use of alternative fuels. The findings illustrate key features of human impacts on the local environment and motivate greater incorporation of social organization into research on environmental change. PMID:23017795

  14. The determinants and trends in household energy consumption in United States during 2001-2009

    NASA Astrophysics Data System (ADS)

    Karuppusamy, Sadasivan

    Objective: The focus of this study is a broad examination of household energy consumption for appliance use, space heating, space cooling, and water heating in United States over the period 2001-2009 using Residential Energy Consumption Survey (RECS) from the years 2001 and 2009. Methods: Linear Regression Analysis is used to identfy determinants of household energy consumption for each of the end uses. Regression based decomposition analysis is used to identify trends in residential energy consumption for each of the end uses. Results: The study identified current determinants of household energy consumption for each of the end uses. These determinants are employed in the study to predict trends in household energy consumption for each of the end uses. Based on the results policy interventions at local and federal level for energy conservation are suggested.

  15. Differing statistical approaches affect the relation between egg consumption, adiposity, and cardiovascular risk factors in adults

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Associations between food patterns and adiposity are poorly understood. Two statistical approaches were used to examine the potential association between egg consumption and adiposity. Two statistical approaches were used to examine the potential association between egg consumption and adiposity. Pa...

  16. Association between Lung Function and Vocal Affections Arising from Tobacco Consumption

    PubMed Central

    Santos, Karoline Weber dos; Echeveste, Simone Soares; Vidor, Deisi Cristina Gollo Marques

    2013-01-01

    Introduction Smoking is a major risk factor for numerous diseases; it is necessary to analyze the impact that the habit can have on vocal health. Objectives To determine the influence of smoking on changes in vocal production and lung vital capacity compared with nonsmokers. Methods This cross-sectional study compared smokers and nonsmokers (24 subjects each). Each participant underwent a vocal and spirometric evaluation to measure vital lung capacity. Results The results showed a worsening in lung vital capacity and other parameters of voice in smokers compared with nonsmokers. Furthermore, the decreased pulmonary vital capacity affected the evaluated voice parameters, and decreased carrying capacity was closely related to smoking. The time and amount of consumption had a direct relationship with the vocal and maximum phonation time. Conclusions This study showed that smoking causes voice disorders due to lung weakness. Thus, voice changes are affected both directly by interference of smoking on vocal structures and indirectly by increased weakness, which impairs lung vocal production. PMID:25992056

  17. End use energy consumption data base: transportation sector

    SciTech Connect

    Hooker, J.N.; Rose, A.B.; Greene, D.L.

    1980-02-01

    The transportation fuel and energy use estimates developed a Oak Ridge National Laboratory (ORNL) for the End Use Energy Consumption Data Base are documented. The total data base contains estimates of energy use in the United States broken down into many categories within all sectors of the economy: agriculture, mining, construction, manufacturing, commerce, the household, electric utilities, and transportation. The transportation data provided by ORNL generally cover each of the 10 years from 1967 through 1976 (occasionally 1977 and 1978), with omissions in some models. The estimtes are broken down by mode of transport, fuel, region and State, sector of the economy providing transportation, and by the use to which it is put, and, in the case of automobile and bus travel, by the income of the traveler. Fuel types include natural gas, motor and aviation gasoline, residual and diesel oil, liuqefied propane, liquefied butane, and naphtha- and kerosene-type jet engine fuels. Electricity use is also estimated. The mode, fuel, sector, and use categories themselves subsume one, two, or three levels of subcategories, resulting in a very detailed categorization and definitive accounting.

  18. An Integrated Geovisual Analytics Framework for Analysis of Energy Consumption Data and Renewable Energy Potentials

    SciTech Connect

    Omitaomu, Olufemi A; Kramer, Ian S; Kodysh, Jeffrey B; Bhaduri, Budhendra L; Steed, Chad A; Karthik, Rajasekar; Nugent, Philip J; Myers, Aaron T

    2012-01-01

    We present an integrated geovisual analytics framework for utility consumers to interactively analyze and benchmark their energy consumption. The framework uses energy and property data already available with the utility companies and county governments respectively. The motivation for the developed framework is the need for citizens to go beyond the conventional utility bills in understanding the patterns in their energy consumption. There is also a need for citizens to go beyond one-time improvements that are often not monitored and measured over time. Some of the features of the framework include the ability for citizens to visualize their historical energy consumption data along with weather data in their location. The quantity of historical energy data available is significantly more than what is available from utility bills. An overlay of the weather data provides users with a visual correlation between weather patterns and their energy consumption patterns. Another feature of the framework is the ability for citizens to compare their consumption on an aggregated basis to that of their peers other citizens living in houses of similar size and age and within the same or different geographical boundaries, such as subdivision, zip code, or county. The users could also compare their consumption to others based on the size of their family and other attributes. This feature could help citizens determine if they are among the best in class . The framework can also be used by the utility companies to better understand their customers and to plan their services. To make the framework easily accessible, it is developed to be compatible with mobile consumer electronics devices.

  19. Affect-related behaviors in mice selectively bred for high and low voluntary alcohol consumption.

    PubMed

    Can, Adem; Grahame, Nicholas J; Gould, Todd D

    2012-03-01

    There is considerable evidence for the existence of comorbidity between alcohol-use disorders and depression in humans. One strategy to elucidate hereditary factors affecting the comorbidity of these disorders is to use genetic animal models, such as mouse lines selectively bred for voluntary ethanol consumption. We hypothesized that mice from lines that were bred for high-alcohol preference would manifest increased depression-like phenotypes compared to low-alcohol preferring mice. Mice that were bi-directionally selected and bred on the basis of their High- (HAP) or Low-Alcohol Preference (LAP) were tested in the open-field (OFT), dark-light box (DLB), forced swim (FST), and learned helplessness tests (LH). The study was conducted in two independently derived replicates. In the OFT, both HAP2 and HAP3 mice showed higher levels of general locomotion compared to LAP mice. However, only HAP2 mice spent more time in the center compared to LAP2 mice. In the DLB, there was a slightly higher anxiety-like phenotype in HAP mice. In both FST and LH, we observed higher depression-like behaviors in HAP mice compared to LAP mice, but this was limited to the Replicate 2 mice. Overall, we identified affect-related behavioral changes in mouse lines bred for high-alcohol preference. Notably, the Replicate 3 lines that showed fewer depression-like behaviors also manifest smaller differences in alcohol intake. These data suggest that there may be overlap between genes that predispose to excessive alcohol intake and those underlying affect-related behaviors in the mouse.

  20. Effect of irrigation scheduling on energy consumption. Final report

    SciTech Connect

    Not Available

    1981-04-01

    The objective of this study was to determine the potential for a reduction in water use and, therefore, energy use through computerized irrigation scheduling. Water and energy were used interchangeably in this study through the use of energy multipliers, 605 kWh/ac-ft for surface and 857 kWh/ac-ft for sprinkler irrigation systems. These energy figures were used as the energy in the water at the edge of the field where the use of scheduling could have an impact on the quantities used. The study was based on agricultural conditions as they exist in the San Joaquin Valley of California. Study sites were selected in this area for monitoring and analysis. These study sites were monitored for various production factors, gross applied amounts of water and crop yields. These data were collected for the 1978/79 and 1979/80 growing seasons. Scheduled and non-scheduled fields were paired based on factors other than gross applied water and yield. This permitted the identification of the effect of computerized irrigation scheduling on water and energy use. For the energy use analysis in the study an energy per unit yield (EUY) value was developed. Data collected in the course of this study showed a reduction in EUY between scheduled and non-scheduled fields on sprinkler irrigated grain, sprinkler irrigated cotton and furrow irrigated tomatoes of 32%, 7% and 25% respectively, in the study area. Results of the data analysis showed that computerized scheduling affected water and energy use most where irrigation systems with a high degree of water control are used. Percent change in EUY values were used to extrapolate these data to the seventeen (17) major agricultural energy using states. This analysis showed the potential to save, through irrigation scheduling, 0.031 QUAD Btu on systems as they currently exist and are currently managed. 15 figures, 21 tables.

  1. Impact of Sustainable Cool Roof Technology on Building Energy Consumption

    NASA Astrophysics Data System (ADS)

    Vuppuluri, Prem Kiran

    Highly reflective roofing systems have been analyzed over several decades to evaluate their ability to meet sustainability goals, including reducing building energy consumption and mitigating the urban heat island. Studies have isolated and evaluated the effects of climate, surface reflectivity, and roof insulation on energy savings, thermal load mitigation and also ameliorating the urban heat island. Other sustainable roofing systems, like green-roofs and solar panels have been similarly evaluated. The motivation for the present study is twofold: the first goal is to present a method for simultaneous evaluation and inter-comparison of multiple roofing systems, and the second goal is to quantitatively evaluate the realized heating and cooling energy savings associated with a white roof system compared to the reduction in roof-top heat flux. To address the first research goal a field experiment was conducted at the International Harvester Building located in Portland, OR. Thermal data was collected for a white roof, vegetated roof, and a solar panel shaded vegetated roof, and the heat flux through these roofing systems was compared against a control patch of conventional dark roof membrane. The second research goal was accomplished using a building energy simulation program to determine the impact of roof area and roof insulation on the savings from a white roof, in both Portland and Phoenix. The ratio of cooling energy savings to roof heat flux reduction from replacing a dark roof with a white roof was 1:4 for the month of July, and 1:5 annually in Portland. The COP of the associated chillers ranges from 2.8-4.2, indicating that the ratio of cooling energy savings to heat flux reduction is not accounted for solely by the COP of the chillers. The results of the building simulation indicate that based on energy savings alone, white roofs are not an optimal choice for Portland. The benefits associated with cooling energy savings relative to a black roof are offset by

  2. Modeling energy consumption in the Defense Logistics Agency. Final report, November 1986-December 1987

    SciTech Connect

    Hobson, J.J.

    1988-05-01

    The Defense Logistics Agency (DLA) Office of Installation Services and Environmental Protection was tasked with developing goals for energy consumption at each of the DLA-managed facilities. These goals could be based on factors that beyond the control of the organization and can vary from month to month, such as weather conditions and workload. This report presents the results of an analysis that mathematically modeled energy consumption and then attempted to use these models to assist in setting consumption goals for the agency. The DLA facilities identified the factors they considered to be predictors of energy consumption. Three years of monthly data were submitted for each factor. The data were screened to identify possible problems and to determine which factors had some relationship with energy consumption. Regression models were developed to predict total consumption, electric consumption, and non-electric consumption at each location. These models showed a definite relationship between weather and workload factors and energy consumption. However, the models were not accurate enough to be used to set consumption goals in DLA due to the impact of extraneous factors that were not quantifiable. Goals for energy consumption should be flexible to allow changes when unusual weather or workload conditions exist. However, these goals cannot be derived through a precise mathematical formula given the existing detail of available data.

  3. Consumption of different soymilk formulations differentially affects the gut microbiomes of overweight and obese men.

    PubMed

    Fernandez-Raudales, Dina; Hoeflinger, Jennifer L; Bringe, Neal A; Cox, Stephen B; Dowd, Scot E; Miller, Michael J; Gonzalez de Mejia, Elvira

    2012-01-01

    The effects of consuming foods on the intestinal microbiome of obese individuals remain unclear. The objective of this study was to compare the effects of consuming low glycinin soymilk (LGS, 49.5% β-conglycinin/6% glycinin), conventional soymilk (S, 26.5% β-conglycinin/38.7% glycinin) or bovine milk (M, 0% β-conglycinin/0% glycinin) on the intestinal microbiome in overweight and obese men. In a randomized double-blind study, participants (64 men, BMI > 25, 20-45 y old), organized in three groups, consumed 500 mL of LGS, S or M daily for 3 mo. Three fecal samples were collected before (baseline) and after 3 mo of consumption. Dietary energy and macronutrient intake were monitored monthly and remained constant throughout the study (p > 0.05). Microbial composition was analyzed with qPCR and bTEFAP. Within groups, qPCR analysis showed that the total bacteria increased in all treatments over time (p < 0.001). Bacteroides-Prevotella (p = 0.001) and Lactobacillus (p < 0.001) increased in LGS and M, respectively. Bifidobacterium was significantly reduced in LGS (p = 0.003) and S (p < 0.001). Bacterial diversity decreased for LGS, S and M (p = 0.004, 0.005, 0.001; respectively). Unweighted UniFrac analysis revealed that the microbial communities were more similar within than between individuals. The Firmicutes to Bacteroidetes ratio decreased in both LGS and S groups and remained relatively unchanged in the M group (Time p = 0.012; Interaction p = 0.059). Indicator analysis revealed several genera that were indicative of each treatment including Lactobacillus and Prevotella. Consumption of the three beverages differentially altered the microbiota in overweight and obese men including a potentially beneficial alteration of the Firmicutes to Bacteroidetes ratio in both soymilk groups.

  4. State policies affecting natural gas consumption (Notice of inquiry issued on August 14, 1992). Summary of comments

    SciTech Connect

    Lemon, R.; Kamphuis-Zatopa, W.

    1993-03-25

    On August 14, 1992, the United States Department of Energy issued a Request for Comments Concerning State Policies Affecting Natural Gas Consumption. This Notice of (NOI) noted the increasing significance of the role played by states and sought to gain better understanding of how state policies impact the gas industry. The general trend toward a. more competitive marketplace for natural gas, as well as recent regulatory and legislative changes at the Federal level, are driving State regulatory agencies to reevaluate how they regulate natural gas. State action is having a significant impact on the use of natural gas for generating electricity, as well as affecting the cost-effective trade-off between conservation expenditures and gas use. Additionally, fuel choice has an impact upon the environment and national energy security. In light of these dimensions, the Department of Energy initiated this study of State regulation. The goals of this NOI are: (1) help DOE better understand the impact of State policies on the efficient use of gas; (2) increase the awareness of the natural gas industry and Federal and State officials to the important role of State policies and regulations; (3) create an improved forum for dialogue on State and Federal natural gas issues; and, (4) develop a consensus on an analytical agenda that would be most helpful in addressing the regulatory challenges faced by the States. Ninety-seven parties filed comments, and of these ninety-seven, fifteen parties filed reply comments. Appendix One lists these parties. This report briefly syntheses the comments received. The goal is to assist parties to judging the extent of consensus on the problems posed and the remedies suggested, aid in identifying future analytical analyses, and assist parties in assessing differences in strategies and regulatory philosophies which shape these issues and their resolution.

  5. Energy audit in small wastewater treatment plants: methodology, energy consumption indicators, and lessons learned.

    PubMed

    Foladori, P; Vaccari, M; Vitali, F

    2015-01-01

    Energy audits in wastewater treatment plants (WWTPs) reveal large differences in the energy consumption in the various stages, depending also on the indicators used in the audits. This work is aimed at formulating a suitable methodology to perform audits in WWTPs and identifying the most suitable key energy consumption indicators for comparison among different plants and benchmarking. Hydraulic-based stages, stages based on chemical oxygen demand, sludge-based stages and building stages were distinguished in WWTPs and analysed with different energy indicators. Detailed energy audits were carried out on five small WWTPs treating less than 10,000 population equivalent and using continuous data for 2 years. The plants have in common a low designed capacity utilization (52% on average) and equipment oversizing which leads to waste of energy in the absence of controls and inverters (a common situation in small plants). The study confirms that there are several opportunities for reducing energy consumption in small WWTPs: in addition to the pumping of influent wastewater and aeration, small plants demonstrate low energy efficiency in recirculation of settled sludge and in aerobic stabilization. Denitrification above 75% is ensured through intermittent aeration and without recirculation of mixed liquor. Automation in place of manual controls is mandatory in illumination and electrical heating. PMID:26360762

  6. Energy audit in small wastewater treatment plants: methodology, energy consumption indicators, and lessons learned.

    PubMed

    Foladori, P; Vaccari, M; Vitali, F

    2015-01-01

    Energy audits in wastewater treatment plants (WWTPs) reveal large differences in the energy consumption in the various stages, depending also on the indicators used in the audits. This work is aimed at formulating a suitable methodology to perform audits in WWTPs and identifying the most suitable key energy consumption indicators for comparison among different plants and benchmarking. Hydraulic-based stages, stages based on chemical oxygen demand, sludge-based stages and building stages were distinguished in WWTPs and analysed with different energy indicators. Detailed energy audits were carried out on five small WWTPs treating less than 10,000 population equivalent and using continuous data for 2 years. The plants have in common a low designed capacity utilization (52% on average) and equipment oversizing which leads to waste of energy in the absence of controls and inverters (a common situation in small plants). The study confirms that there are several opportunities for reducing energy consumption in small WWTPs: in addition to the pumping of influent wastewater and aeration, small plants demonstrate low energy efficiency in recirculation of settled sludge and in aerobic stabilization. Denitrification above 75% is ensured through intermittent aeration and without recirculation of mixed liquor. Automation in place of manual controls is mandatory in illumination and electrical heating.

  7. Season and application rates affect vaccine bait consumption by prairie dogs in Colorado and Utah, USA

    USGS Publications Warehouse

    Tripp, Daniel W.; Rocke, Tonie E.; Streich, Sean P.; Brown, Nathanael L.; Fernandez, Julia Rodriguez-Ramos; Miller, Michael W.

    2014-01-01

    Plague, a zoonotic disease caused by the bacterium Yersinia pestis, causes high rates of mortality in prairie dogs (Cynomys spp.). An oral vaccine against plague has been developed for prairie dogs along with a palatable bait to deliver vaccine and a biomarker to track bait consumption. We conducted field trials between September 2009 and September 2012 to develop recommendations for bait distribution to deliver plague vaccine to prairie dogs. The objectives were to evaluate the use of the biomarker, rhodamine B, in field settings to compare bait distribution strategies, to compare uptake of baits distributed at different densities, to assess seasonal effects on bait uptake, and to measure bait uptake by nontarget small mammal species. Rhodamine B effectively marked prairie dogs' whiskers during these field trials. To compare bait distribution strategies, we applied baits around active burrows or along transects at densities of 32, 65, and 130 baits/ha. Distributing baits at active burrows or by transect did not affect uptake by prairie dogs. Distributing baits at rates of ≥65/ha (or ≥1 bait/active burrow) produced optimal uptake, and bait uptake by prairie dogs in the autumn was superior to uptake in the spring. Six other species of small mammals consumed baits during these trials. All four species of tested prairie dogs readily consumed the baits, demonstrating that vaccine uptake will not be an obstacle to plague control via oral vaccination.

  8. Season and application rates affect vaccine bait consumption by prairie dogs in Colorado and Utah, USA.

    PubMed

    Tripp, Daniel W; Rocke, Tonie E; Streich, Sean P; Brown, Nathanael L; Fernandez, Julia Rodriguez-Ramos; Miller, Michael W

    2014-04-01

    Plague, a zoonotic disease caused by the bacterium Yersinia pestis, causes high rates of mortality in prairie dogs (Cynomys spp.). An oral vaccine against plague has been developed for prairie dogs along with a palatable bait to deliver vaccine and a biomarker to track bait consumption. We conducted field trials between September 2009 and September 2012 to develop recommendations for bait distribution to deliver plague vaccine to prairie dogs. The objectives were to evaluate the use of the biomarker, rhodamine B, in field settings to compare bait distribution strategies, to compare uptake of baits distributed at different densities, to assess seasonal effects on bait uptake, and to measure bait uptake by nontarget small mammal species. Rhodamine B effectively marked prairie dogs' whiskers during these field trials. To compare bait distribution strategies, we applied baits around active burrows or along transects at densities of 32, 65, and 130 baits/ha. Distributing baits at active burrows or by transect did not affect uptake by prairie dogs. Distributing baits at rates of ≥ 65/ha (or ≥ 1 bait/active burrow) produced optimal uptake, and bait uptake by prairie dogs in the autumn was superior to uptake in the spring. Six other species of small mammals consumed baits during these trials. All four species of tested prairie dogs readily consumed the baits, demonstrating that vaccine uptake will not be an obstacle to plague control via oral vaccination. PMID:24484490

  9. Water withdrawal and consumption reduction analysis for electrical energy generation system

    NASA Astrophysics Data System (ADS)

    Nouri, Narjes

    There is an increasing concern over shrinking water resources. Water use in the energy sector primarily occurs in electricity generation. Anticipating scarcer supplies, the value of water is undoubtedly on the rise and design, implementation, and utilization of water saving mechanisms in energy generation systems are becoming inevitable. Most power plants generate power by boiling water to produce steam to spin electricity-generating turbines. Large quantities of water are often used to cool the steam in these plants. As a consequence, most fossil-based power plants in addition to consuming water, impact the water resources by raising the temperature of water withdrawn for cooling. A comprehensive study is conducted in this thesis to analyze and quantify water withdrawals and consumption of various electricity generation sources such as coal, natural gas, renewable sources, etc. Electricity generation for the state of California is studied and presented as California is facing a serious drought problem affecting more than 30 million people. Integrated planning for the interleaved energy and water sectors is essential for both water and energy savings. A linear model is developed to minimize the water consumption while considering several limitations and restrictions. California has planned to shut down some of its hydro and nuclear plants due to environmental concerns. Studies have been performed for various electricity generation and water saving scenarios including no-hydro and no-nuclear plant and the results are presented. Modifications to proposed different scenarios have been applied and discussed to meet the practical and reliability constraints.

  10. Analysis of electric energy consumption of automatic milking systems in different configurations and operative conditions.

    PubMed

    Calcante, Aldo; Tangorra, Francesco M; Oberti, Roberto

    2016-05-01

    Automatic milking systems (AMS) have been a revolutionary innovation in dairy cow farming. Currently, more than 10,000 dairy cow farms worldwide use AMS to milk their cows. Electric consumption is one of the most relevant and uncontrollable operational cost of AMS, ranging between 35 and 40% of their total annual operational costs. The aim of the present study was to measure and analyze the electric energy consumption of 4 AMS with different configurations: single box, central unit featuring a central vacuum system for 1 cow unit and for 2 cow units. The electrical consumption (daily consumption, daily consumption per cow milked, consumption per milking, and consumption per 100L of milk) of each AMS (milking unit + air compressor) was measured using 2 energy analyzers. The measurement period lasted 24h with a sampling frequency of 0.2Hz. The daily total energy consumption (milking unit + air compressor) ranged between 45.4 and 81.3 kWh; the consumption per cow milked ranged between 0.59 and 0.99 kWh; the consumption per milking ranged between 0.21 and 0.33 kWh; and the consumption per 100L of milk ranged between 1.80 to 2.44 kWh according to the different configurations and operational contexts considered. Results showed that AMS electric consumption was mainly conditioned by farm management rather than machine characteristics/architectures.

  11. Energy consumption program: A computer model simulating energy loads in buildings

    NASA Technical Reports Server (NTRS)

    Stoller, F. W.; Lansing, F. L.; Chai, V. W.; Higgins, S.

    1978-01-01

    The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

  12. Geographical and temporal differences in electric vehicle range due to cabin conditioning energy consumption

    NASA Astrophysics Data System (ADS)

    Kambly, Kiran; Bradley, Thomas H.

    2015-02-01

    Electric vehicles (EVs) are vehicles that are propelled by electric motors powered by rechargeable battery. They are generally asserted to have GHG emissions, driveability and life cycle cost benefits over conventional vehicles. Despite this, EVs face significant challenges due to their limited on-board energy storage capacity. In addition to providing energy for traction, the energy storage device operates HVAC systems for cabin conditioning. This results in reduced driving range. The factors such as local ambient temperature, local solar radiation, local humidity, duration and thermal soak have been identified to affect the cabin conditions. In this paper, the development of a detailed system-level approach to HVAC energy consumption in EVs as a function of transient environmental parameters is described. The resulting vehicle thermal comfort model is used to address several questions such as 1) How does day to day environmental conditions affect EV range? 2) How does frequency of EV range change geographically? 3) How does trip start time affect EV range? 4) Under what conditions does cabin preconditioning assist in increasing the EV range? 5) What percentage increase in EV range can be expected due to cabin preconditioning at a given location?

  13. 10 CFR 431.324 - Uniform test method for the measurement of energy efficiency and standby mode energy consumption...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Uniform test method for the measurement of energy efficiency and standby mode energy consumption of metal halide lamp ballasts. 431.324 Section 431.324 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND...

  14. 10 CFR 431.324 - Uniform test method for the measurement of energy efficiency and standby mode energy consumption...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform test method for the measurement of energy efficiency and standby mode energy consumption of metal halide lamp ballasts. 431.324 Section 431.324 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND...

  15. Energy consumption and usage characteristics from field measurements of residential dishwashers, clothes washers and clothes dryers

    SciTech Connect

    Chang, Y.L.; Grot, R.A.

    1980-10-01

    The measured energy consumption and usage characteristics for household dishwashers, clothes washers, and clothes dryers for ten townhouses at Twin Rivers, N.J., are presented. Whenever the dishwashers and/or clothes washers were in use, the energy consumption, water consumption, frequency of usage, and water temperature were measured by a data acquisition system. The electrical energy of electric clothes dryers and the gas consumption of gas clothes dryers were measured, as well as their frequency and duration of use, and exhaust temperature. Typical household usage patterns of these major appliances are included.

  16. Need for Affect, Need for Cognition, and the Intention-Fruit Consumption Relationship: An Action-Control Perspective

    ERIC Educational Resources Information Center

    de Bruijn, Gert-Jan; Keer, Mario; van den Putte, Bas; Neijens, Peter

    2012-01-01

    Objective: Predictors of action-control profiles are useful targets for health behaviour change interventions, but action-control research has not focused on fruit consumption and has not yet included need for affect and need for cognition, despite the demonstrated usefulness of these variables in a broad range of research. The role of these…

  17. Evaluating the Relationship between the Population Trends, Prices, Heat Waves, and the Demands of Energy Consumption in Cities

    DOE PAGES

    Fu, Katherine; Allen, Melissa; Archibald, Richard

    2015-11-18

    The demands of energy consumption have been projected as a key factor that affects an economy at the city, national, and international level. Contributions to total U.S. greenhouse gas emissions in 2012 by various urban sectors include electricity (31%), transportation (28%), industry (20%), agriculture (10%), and commercial and residential (10%). Moreover, the heavy demands of energy consumption in the cities by residents, commercial businesses, industries, and transportation are important for maintaining and sustaining sufficient economic growth. The purpose of this study is to investigate the relationships between population trends, historical energy consumptions, the changes of average electricity price, average annualmore » temperature, and extreme weather events for three selected cities: New York, Chicago, and Los Angeles. These cities are exemplary of, metropolitan areas in the East, Middle, and the Western regions of the U.S. Here, we find that the total energy consumptions of New York, Chicago, and Los Angeles are influenced to various degrees by changes in population, temperature and the average price of electricity and that only one city, Los Angeles, does price significantly affect electricity use. Our finding has implications for policy making, suggesting that each city s climate, size and general economic priorities must be considered in developing climate change mitigation strategies and incentives.« less

  18. Evaluating the Relationship between the Population Trends, Prices, Heat Waves, and the Demands of Energy Consumption in Cities

    SciTech Connect

    Fu, Katherine; Allen, Melissa; Archibald, Richard

    2015-11-18

    The demands of energy consumption have been projected as a key factor that affects an economy at the city, national, and international level. Contributions to total U.S. greenhouse gas emissions in 2012 by various urban sectors include electricity (31%), transportation (28%), industry (20%), agriculture (10%), and commercial and residential (10%). Moreover, the heavy demands of energy consumption in the cities by residents, commercial businesses, industries, and transportation are important for maintaining and sustaining sufficient economic growth. The purpose of this study is to investigate the relationships between population trends, historical energy consumptions, the changes of average electricity price, average annual temperature, and extreme weather events for three selected cities: New York, Chicago, and Los Angeles. These cities are exemplary of, metropolitan areas in the East, Middle, and the Western regions of the U.S. Here, we find that the total energy consumptions of New York, Chicago, and Los Angeles are influenced to various degrees by changes in population, temperature and the average price of electricity and that only one city, Los Angeles, does price significantly affect electricity use. Our finding has implications for policy making, suggesting that each city s climate, size and general economic priorities must be considered in developing climate change mitigation strategies and incentives.

  19. Analyzing the Energy and Power Consumption of Remote Memory Accesses in the OpenSHMEM Model

    SciTech Connect

    Jana, Siddhartha; Hernandez, Oscar R; Poole, Stephen W; Hsu, Chung-Hsing; Chapman, Barbara

    2014-01-01

    PGAS models like OpenSHMEM provide interfaces to explicitly initiate one-sided remote memory accesses among processes. In addition, the model also provides synchronizing barriers to ensure a consistent view of the distributed memory at different phases of an application. The incorrect use of such interfaces affects the scalability achievable while using a parallel programming model. This study aims at understanding the effects of these constructs on the energy and power consumption behavior of OpenSHMEM applications. Our experiments show that cost incurred in terms of the total energy and power consumed depends on multiple factors across the software and hardware stack. We conclude that there is a significant impact on the power consumed by the CPU and DRAM due to multiple factors including the design of the data transfer patterns within an application, the design of the communication protocols within a middleware, the architectural constraints laid by the interconnect solutions, and also the levels of memory hierarchy within a compute node. This work motivates treating energy and power consumption as important factors while designing compute solutions for current and future distributed systems.

  20. 10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... per cycle for water softener regeneration, in kilowatt-hours and determined according to section 5.1.3... paragraph (c)(1)(i) of this section, W = the water energy consumption per cycle for the normal cycle as... defined in section 1.12 of appendix C1 to this subpart, and the water energy consumption per cycle...

  1. 10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... paragraph (c)(1)(i) of this section, and W = the total water energy consumption per cycle for the normal..., and Wg = the total water energy consumption per cycle for the normal cycle as defined in section 1.6... or oil-heated water is used, the product of: the representative average-use of 392 cycles per...

  2. A US-China Interview Study: Biology Students' Argumentation and Explanation about Energy Consumption Issues

    ERIC Educational Resources Information Center

    Jin, Hui; Hokayem, Hayat; Wang, Sasha; Wei, Xin

    2016-01-01

    As China and the United States become the top two carbon emitters in the world, it is crucial for citizens in both countries to construct a sophisticated understanding of energy consumption issues. This interview study examines how U.S. and Chinese students compare in explaining and arguing about two critical energy consumption issues: burning…

  3. A US-China Interview Study: Biology Students' Argumentation and Explanation about Energy Consumption Issues

    ERIC Educational Resources Information Center

    Jin, Hui; Hokayem, Hayat; Wang, Sasha; Wei, Xin

    2015-01-01

    As China and the United States become the top two carbon emitters in the world, it is crucial for citizens in both countries to construct a sophisticated understanding of energy consumption issues. This interview study examines how U.S. and Chinese students compare in explaining and arguing about two critical energy consumption issues: burning…

  4. Consumption of Energy in New York State: 1972 (with Estimates for 1973).

    ERIC Educational Resources Information Center

    Hausgaard, Olaf

    This report contains tabular data on energy consumption for the calendar year 1972 and a forecast of natural gas requirements for the period 1973 to 1976. Broad sector categories used in the tables are electric utilities, residential commercial, industrial, and transportation. Tables show energy consumption by primary source and major sector for…

  5. Brain energy consumption in ethanol-treated, Long-Evans rats.

    PubMed

    Viña, J R; Salus, J E; DeJoseph, M R; Pallardo, F; Towfighi, J; Hawkins, R A

    1991-06-01

    The cerebral metabolic rate of glucose utilization (CMRGlc) was measured in rats fed liquid diets containing ethanol for 8 wk, after removal of ethanol from the diet and after acute ethanol intoxication. Control rats were pair fed the liquid diets containing isoenergetic amounts of dextrin-maltose. Quantitative autogradiography using [6-14C]glucose measured CMRGlc at the level of individual structures. Digital image techniques created stereograms of brain energy consumption from the autoradiographs. These techniques provided information about CMRGlc throughout the brain. Rats given the ethanol liquid diet drank constantly throughout the day and night. Neuropathological examination of brain revealed no abnormalities from ethanol consumption. Acute ethanol administration to control rats produced a decrease in CMRGlc throughout the brain that was most prominent in structures concerning auditory, visual, memory and motor functions. Chronic ethanol consumption did not reduce CMRGlc to the same degree as acute ethanol intoxication; in fact, it affected only a few structures. The removal of ethanol from chronic ethanol-treated rats for a period of 18 h caused CMRGlc to rise above control values throughout the brain. However, there were no seizures or other evidence of brain dysfunction.

  6. Input-Output Modeling for Urban Energy Consumption in Beijing: Dynamics and Comparison

    PubMed Central

    Zhang, Lixiao; Hu, Qiuhong; Zhang, Fan

    2014-01-01

    Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making. PMID:24595199

  7. Comparison of Real World Energy Consumption to Models and Department of Energy Test Procedures

    SciTech Connect

    Goetzler, William; Sutherland, Timothy; Kar, Rahul; Foley, Kevin

    2011-09-01

    This study investigated the real-world energy performance of appliances and equipment as it compared with models and test procedures. The study looked to determine whether the U.S. Department of Energy and industry test procedures actually replicate real world conditions, whether performance degrades over time, and whether installation patterns and procedures differ from the ideal procedures. The study first identified and prioritized appliances to be evaluated. Then, the study determined whether real world energy consumption differed substantially from predictions and also assessed whether performance degrades over time. Finally, the study recommended test procedure modifications and areas for future research.

  8. Green tea consumption affects cognitive dysfunction in the elderly: a pilot study.

    PubMed

    Ide, Kazuki; Yamada, Hiroshi; Takuma, Norikata; Park, Mijong; Wakamiya, Noriko; Nakase, Junpei; Ukawa, Yuuichi; Sagesaka, Yuko M

    2014-09-29

    Green tea is known to have various health benefits for humans. However, the effect of green tea consumption on cognitive dysfunction remains to be clinically verified. We conducted a clinical study to investigate the effects of green tea consumption on cognitive dysfunction. Twelve elderly nursing home residents with cognitive dysfunction (Mini-Mental State Examination Japanese version (MMSE-J) score: <28) participated in the study (2 men, 10 women; mean age, 88 years). The participants consumed green tea powder 2 g/day for 3 months. After three months of green tea consumption, the participants' MMSE-J scores were significantly improved (before, 15.3 ± 7.7; after, 17.0 ± 8.2; p = 0.03). This result suggests that green tea consumption may be effective in improving cognitive function or reducing the progression of cognitive dysfunction; however, long-term large-scale controlled studies are needed to further clarify the effect.

  9. The Reality and Future Scenarios of Commercial Building Energy Consumption in China

    SciTech Connect

    Zhou, Nan; Lin, Jiang

    2007-08-01

    While China's 11th Five Year Plan called for a reduction of energy intensity by 2010, whether and how the energy consumption trend can be changed in a short time has been hotly debated. This research intends to evaluate the impact of a variety of scenarios of GDP growth, energy elasticity and energy efficiency improvement on energy consumption in commercial buildings in China using a detailed China End-use Energy Model. China's official energy statistics have limited information on energy demand by end use. This is a particularly pertinent issue for building energy consumption. The authors have applied reasoned judgments, based on experience of working on Chinese efficiency standards and energy related programs, to present a realistic interpretation of the current energy data. The bottom-up approach allows detailed consideration of end use intensity, equipment efficiency, etc., thus facilitating assessment of potential impacts of specific policy and technology changes on building energy use. The results suggest that: (1) commercial energy consumption in China's current statistics is underestimated by about 44%, and the fuel mix is misleading; (2) energy efficiency improvements will not be sufficient to offset the strong increase in end-use penetration and intensity in commercial buildings; (3) energy intensity (particularly electricity) in commercial buildings will increase; (4) different GDP growth and elasticity scenarios could lead to a wide range of floor area growth trajectories , and therefore, significantly impact energy consumption in commercial buildings.

  10. Energy for 500 Million Homes: Drivers and Outlook for Residential Energy Consumption in China

    SciTech Connect

    Zhou, Nan; McNeil, Michael A.; Levine, Mark

    2009-06-01

    China's rapid economic expansion has propelled it to the rank of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modelling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities. From this analysis, we can conclude that Chinese residential energy consumption will more than double by 2020, from 6.6 EJ in 2000 to 15.9 EJ in 2020. This increase will be driven primarily by urbanization, in combination with increases in living standards. In the urban and higher income Chinese households of the future, most major appliances will be common, and heated and cooled areas will grow on average. These shifts will offset the relatively modest efficiency gains expected according to current government plans and policies already in place. Therefore, levelling and reduction of growth in residential energy demand in China will require a new set of more aggressive efficiency policies.

  11. Understanding Teenagers' Personal Contexts to Design Technology That Supports Learning about Energy Consumption

    ERIC Educational Resources Information Center

    Avramides, Katerina; Craft, Brock; Luckin, Rosemary

    2016-01-01

    Energy sustainability is prevalent in political and popular rhetoric and yet energy consumption is rising. Teenagers are an important category of future energy consumers, but little is known of their conceptions about energy and energy saving. We report on empirical research with two groups of teenagers. This is part of ongoing work to design…

  12. Energy consumption in personal computer attached laser printers: Past, present, future

    SciTech Connect

    Green, T.

    1995-12-01

    Personal computer (PC) printers have been criticized in recent years for their energy consumption, with criticism especially targeted at laser printers. The popular view, largely correct, has been that inkjet printers were energy-efficient, while lasers were power {open_quotes}hogs.{close_quotes} it will be shown, however, that laser printer energy consumption has dramatically improved in the last few years, thanks largely to prompting by the U.S. Environmental Protection Agency`s (EPA`s) Energy Star program. Two years ago laser printers idled drawing 70 to 100 W; most now idle drawing 5 to 30 W. The inkjet printer`s energy efficiency has been widely publicized, so it will be used as a benchmark throughout this paper. When idle, an inkjet printer draws 5 to 10 W. Some laser printers` total energy consumption has now dropped to a level such that their energy consumption, for similar performance machines, now approaches that of inkjet printers.

  13. Energy consumption analysis of the Venus Deep Space Station (DSS-13)

    NASA Technical Reports Server (NTRS)

    Hayes, N. V.

    1983-01-01

    This report continues the energy consumption analysis and verification study of the tracking stations of the Goldstone Deep Space Communications Complex, and presents an audit of the Venus Deep Space Station (DSS 13). Due to the non-continuous radioastronomy research and development operations at the station, estimations of energy usage were employed in the energy consumption simulation of both the 9-meter and 26-meter antenna buildings. A 17.9% decrease in station energy consumption was experienced over the 1979-1981 years under study. A comparison of the ECP computer simulations and the station's main watt-hour meter readings showed good agreement.

  14. Modeling of moisture diffusivity, activation energy and energy consumption in fluidized bed drying of rough rice

    NASA Astrophysics Data System (ADS)

    Khanali, Majid; Banisharif, Alireza; Rafiee, Shahin

    2016-01-01

    The present work was an attempt to assess the effective moisture diffusivity, activation energy, and energy consumption of rough rice in a batch fluidized bed dryer. Drying experiments were conducted at drying air temperatures of 50, 60, and 70 °C, superficial fluidization velocities of 2.3, 2.5, and 2.8 m/s, and solids holdup of 1.32 kg. Drying kinetics showed that the whole fluidized bed drying of rough rice occurred in the falling rate period. The effective moisture diffusivity was described by an Arrhenius equation. The evaluated effective moisture diffusivity increased with drying air temperature and superficial fluidization velocity and was found to vary from 4.78 × 10-11 to 1.364 × 10-10 m2/s with R2 higher than 0.9643. The activation energy and the pre-exponential factor of Arrhenius equation were found to be in the range of 36.59-44.31 kJ/mol and 4.71 × 10-5-7.15 × 10-4 m2/s, respectively. Both maximum values of the specific energy consumption of 74.73 MJ/kg and the total energy need of 12.43 MJ were obtained at 60 °C drying air temperature and 2.8 m/s superficial fluidization velocity. Both minimum values of the specific energy consumption of 29.98 MJ/kg and the total energy need of 4.85 MJ were obtained under drying air temperature of 70 °C and superficial fluidization velocity of 2.3 m/s.

  15. Modeling of moisture diffusivity, activation energy and energy consumption in fluidized bed drying of rough rice

    NASA Astrophysics Data System (ADS)

    Khanali, Majid; Banisharif, Alireza; Rafiee, Shahin

    2016-11-01

    The present work was an attempt to assess the effective moisture diffusivity, activation energy, and energy consumption of rough rice in a batch fluidized bed dryer. Drying experiments were conducted at drying air temperatures of 50, 60, and 70 °C, superficial fluidization velocities of 2.3, 2.5, and 2.8 m/s, and solids holdup of 1.32 kg. Drying kinetics showed that the whole fluidized bed drying of rough rice occurred in the falling rate period. The effective moisture diffusivity was described by an Arrhenius equation. The evaluated effective moisture diffusivity increased with drying air temperature and superficial fluidization velocity and was found to vary from 4.78 × 10-11 to 1.364 × 10-10 m2/s with R2 higher than 0.9643. The activation energy and the pre-exponential factor of Arrhenius equation were found to be in the range of 36.59-44.31 kJ/mol and 4.71 × 10-5-7.15 × 10-4 m2/s, respectively. Both maximum values of the specific energy consumption of 74.73 MJ/kg and the total energy need of 12.43 MJ were obtained at 60 °C drying air temperature and 2.8 m/s superficial fluidization velocity. Both minimum values of the specific energy consumption of 29.98 MJ/kg and the total energy need of 4.85 MJ were obtained under drying air temperature of 70 °C and superficial fluidization velocity of 2.3 m/s.

  16. Do personal beliefs and peers affect the practice of alcohol consumption in university students in Lebanon?

    PubMed

    Salamé, J; Barbour, B; Salameh, P

    2013-04-01

    Alcohol consumption is frequent among university students in Lebanon as elsewhere in the world. A cross-sectional study was conducted in Lebanon's public and private universities between October 2009 and September 2010 using a standardized questionnaire to assess personal beliefs about alcohol consumption, peers' behaviours and opinions and history of and current drinking practices. Of 1235 students, 199 (16.1%) had an AUDIT score>or=8. Older age, male sex, Christian religion, attending a private university, studying a non-health specialty and residing in Beirut or Mount Lebanon were associated with a higher risk of harmful drinking. Beliefs concerning alcohol consumption and peers' opinions and behaviours were factors significantly associated with harmful drinking, especially: ignoring the dangers of alcohol consumption; higher frequency of consumption with friends; and a higher proportion of friends who drank regularly. University students' alcohol drinking behaviour was mostly influenced by peers' behaviour, and a peer education programme is recommended to decrease the risk of harmful drinking.

  17. Is the Consumption of Energy Drinks Associated With Academic Achievement Among College Students?

    PubMed

    Champlin, Sara E; Pasch, Keryn E; Perry, Cheryl L

    2016-08-01

    Despite widely reported side effects, use of energy drinks has increased among college students, who report that they consume energy drinks to help them complete schoolwork. However, little is known about the association between energy drink use and academic performance. We explored the relationship between energy drink consumption and current academic grade point average (GPA) among first-year undergraduate students. Participants included 844 first-year undergraduates (58.1 % female; 50.7 % White). Students reported their health behaviors via an online survey. We measured energy drink consumption with two measures: past month consumption by number of drinks usually consumed in 1 month and number consumed during the last occasion of consumption. We used multiple linear regression modeling with energy drink consumption and current GPA, controlling for gender, race, weekend and weekday sleep duration, perceived stress, perceived stress management, media use, and past month alcohol use. We found that past month energy drink consumption quantity by frequency (p < 0.001), and energy drinks consumed during the last occasion (p < 0.001), were associated with a lower GPA. Energy drinks consumed during the last occasion of consumption (p = 0.01) remained significantly associated with a lower GPA when controlling for alcohol use. While students report using energy drinks for school-related reasons, our findings suggest that greater energy drink consumption is associated with a lower GPA, even after controlling for potential confounding variables. Longitudinal research is needed that addresses whether GPA declines after continued use of energy drinks or if students struggling academically turn to energy drinks to manage their schoolwork.

  18. Is the Consumption of Energy Drinks Associated With Academic Achievement Among College Students?

    PubMed

    Champlin, Sara E; Pasch, Keryn E; Perry, Cheryl L

    2016-08-01

    Despite widely reported side effects, use of energy drinks has increased among college students, who report that they consume energy drinks to help them complete schoolwork. However, little is known about the association between energy drink use and academic performance. We explored the relationship between energy drink consumption and current academic grade point average (GPA) among first-year undergraduate students. Participants included 844 first-year undergraduates (58.1 % female; 50.7 % White). Students reported their health behaviors via an online survey. We measured energy drink consumption with two measures: past month consumption by number of drinks usually consumed in 1 month and number consumed during the last occasion of consumption. We used multiple linear regression modeling with energy drink consumption and current GPA, controlling for gender, race, weekend and weekday sleep duration, perceived stress, perceived stress management, media use, and past month alcohol use. We found that past month energy drink consumption quantity by frequency (p < 0.001), and energy drinks consumed during the last occasion (p < 0.001), were associated with a lower GPA. Energy drinks consumed during the last occasion of consumption (p = 0.01) remained significantly associated with a lower GPA when controlling for alcohol use. While students report using energy drinks for school-related reasons, our findings suggest that greater energy drink consumption is associated with a lower GPA, even after controlling for potential confounding variables. Longitudinal research is needed that addresses whether GPA declines after continued use of energy drinks or if students struggling academically turn to energy drinks to manage their schoolwork. PMID:27236788

  19. 10 CFR Appendix B1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption... to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Freezers 1... temperature, then these test results shall be used to determine energy consumption. If the...

  20. [Analysis of China's energy consumption and its impact on the environment in the future].

    PubMed

    Zheng, Bo-fu; Deng, Hong-bing; Yan, Yan; Zhao, Jing-zhu

    2005-05-01

    With the development of economy and urbanization, energy consumption and its impact on the environment in the future have become a focal point in China. Based on briefly reviewing energy consumption during 1980-2000 and analyzing its impact, three scenarios are assumed to forecast energy consumption status and analyze its impact on the environment in the future. The results indicate that the emissions of SO2, NOx, CO2 and soot dust caused by energy consumption would keep a high level in the future, and there are significant differences among the three scenarios' estimates. Improving energy efficiency and strengthening the exploitation and utilization of clean and renewable energy are suggested to mitigate the environmental pollution.

  1. [Method for grading industrial sectors in energy consumption and its application].

    PubMed

    Mao, Jian-Su; Ma, Lan

    2013-04-01

    Energy is mainly consumed by the urban industry system, thus grading industrial sectors for their energy consumption may help to identify the concerned industrial sectors and provide necessary information for industrial energy management in China's industrialization and urbanization. In present article, based on a review of the fundamental relationships between energy consumption and industrial sectors, the contribution rates and energy efficiency of industrial sectors are chosen as typical parameters for energy consumption. The concept of distance index of industrial sectors for energy consumption is defined through China's average level as a reference base. The grade of industrial sectors in energy consumption is classed into 9 types from extreme advantage to extreme disadvantage according to the scope of distance index values, and the types of industrial sectors that need to be more concerned are pointed out. Taking Chongqing as a case study, the application for grading industrial sectors for their energy consumption was exhibited, by which, the main industrial sectors are grated and the industrial sectors that should be special concerned in energy management are determined.

  2. Transportation Energy Futures: Combining Strategies for Deep Reductions in Energy Consumption and GHG Emissions (Brochure)

    SciTech Connect

    Not Available

    2013-03-01

    This fact sheet summarizes actions in the areas of light-duty vehicle, non-light-duty vehicle, fuel, and transportation demand that show promise for deep reductions in energy use. Energy efficient transportation strategies have the potential to simultaneously reduce oil consumption and greenhouse gas (GHG) emissions. The Transportation Energy Futures (TEF) project examined how the combination of multiple strategies could achieve deep reductions in GHG emissions and petroleum use on the order of 80%. Led by NREL, in collaboration with Argonne National Laboratory, the project's primary goal was to help inform domestic decisions about transportation energy strategies, priorities, and investments, with an emphasis on underexplored opportunities. TEF findings reveal three strategies with the potential to displace most transportation-related petroleum use and GHG emissions: 1) Stabilizing energy use in the transportation sector through efficiency and demand-side approaches. 2) Using additional advanced biofuels. 3) Expanding electric drivetrain technologies.

  3. Reduction in Energy Consumption & Variability in Steel Foundry Operations

    SciTech Connect

    Frank Peters

    2005-05-04

    large process variation. This indicates the need for ongoing monitoring of the process and system to quantify the effort being expended. A system to measure the grinding effort was investigated but did not prove to be successful. A weld wire counting system was shown to be very successful in tracking casting quality by monitoring the quantity of weld wire being expended on a per casting basis. Further use of such systems is highly recommended. The field studies showed that the visual inspection process for the casting surface was a potentially large source of process variation. Measurement system analysis studies were conducted at three steel casting producers. The tests measured the consistency of the inspectors in identifying the same surface anomalies. The repeatability (variation of the same operator inspecting the same casting) was found to be relatively consistent across the companies at about 60-70%. However, this is still are very large amount of variation. Reproducibility (variation of different operators inspecting the same casting) was worse, ranging between 20 to 80% at the three locations. This large amount of variation shows that there is a great opportunity for improvement. Falsely identifying anomalies for reworking will cause increased expense and energy consumption. This is particularly true if a weld repair and repeated heat treatment is required. However, not identifying an anomaly could also result in future rework processing, a customer return, or scrap. To help alleviate this problem, casting surface comparator plates were developed and distributed to the industry. These plates are very inexpensive which enables them to be provided to all those involved with casting surface quality, such as operators, inspectors, sales, and management.

  4. Short-Term Energy Outlook Model Documentation: Natural Gas Consumption and Prices

    EIA Publications

    2015-01-01

    The natural gas consumption and price modules of the Short-Term Energy Outlook (STEO) model are designed to provide consumption and end-use retail price forecasts for the residential, commercial, and industrial sectors in the nine Census districts and natural gas working inventories in three regions. Natural gas consumption shares and prices in each Census district are used to calculate an average U.S. retail price for each end-use sector.

  5. Predictors of changes in adolescents' consumption of fruits, vegetables and energy-dense snacks.

    PubMed

    Pearson, Natalie; Ball, Kylie; Crawford, David

    2011-03-01

    Understanding the predictors of developmental changes in adolescent eating behaviours is important for the design of nutrition interventions. The present study examined associations between individual, social and physical environmental factors and changes in adolescent eating behaviours over 2 years. Consumption of fruits, vegetables and energy-dense snacks was assessed using a Web-based survey completed by 1850 adolescents from years 7 and 9 of secondary schools in Victoria, Australia, at baseline and 2 years later. Perceived value of healthy eating, self-efficacy for healthy eating, social modelling and support, and home availability and accessibility of foods were assessed at baseline. Self-efficacy for increasing fruit consumption was positively associated with the change in fruit and vegetable consumption, while self-efficacy for decreasing junk food consumption was inversely associated with the change in energy-dense snack consumption. Home availability of energy-dense foods was inversely associated with the change in fruit consumption and positively associated with the change in energy-dense snack consumption, while home availability of fruits and vegetables was positively associated with the change in vegetable consumption. Perceived value of healthy eating and modelling of healthy eating by mothers were positively associated with the change in fruit consumption. Support of best friends for healthy eating was positively associated with the change in vegetable consumption. Self-efficacy and home availability of foods appear to be consistent predictors of change in fruit, vegetable and energy-dense snack consumption. Future study should assess the effectiveness of methods to increase self-efficacy for healthy eating and to improve home availability of healthy food options in programmes promoting healthy eating among adolescents.

  6. Energy balance affected by electrolyte recirculation and operating modes in microbial fuel cells.

    PubMed

    Jacobson, Kyle S; Kelly, Patrick T; He, Zhen

    2015-03-01

    Energy recovery and consumption in a microbial fuel cell (MFC) can be significantly affected by the operating conditions. This study investigated the effects of electrolyte recirculation and operation mode (continuous vs sequence batch reactor) on the energy balance in a tubular MFC. It was found that decreasing the anolyte recirculation also decreased the energy recovery. Because of the open environment of the cathode electrode, the catholyte recirculation consumed 10 to 50 times more energy than the anolyte recirculation, and resulted in negative energy balances despite the reduction of the anolyte recirculation. Reducing the catholyte recirculation to 20% led to a positive energy balance of 0.0288 kWh m(-3). The MFC operated as a sequence batch reactor generated less energy and had a lower energy balance than the one with continuous operation. Those results encourage the further development of MFC technology to achieve neutral or even positive energy output.

  7. 76 FR 72872 - Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-28

    ... CFR Part 305 Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and Conservation Act (``Appliance Labeling... Rule, issued pursuant to the Energy Policy and Conservation Act (EPCA),\\1\\ requires energy labeling...

  8. Power to the Plug: An Introduction to Energy, Electricity, Consumption and Efficiency

    SciTech Connect

    DOE / EERE / NEED Project

    2011-06-07

    The NEED Project and the U.S. Department of Energy have collaborated to bring you this educational four-page guide to energy, electricity, consumption and efficiency. It includes, on the last page, a home energy survey to help you analyze your home energy use.

  9. Energy Consumption in Schools and Homes. Technical Report No. 2 of a Study of School Calendars.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Div. of Research.

    In this, the second in a series of reports, a study of school and home energy consumption in New York was undertaken to determine if schools would save energy by closing for an extended period during cold weather; if more energy is used in homes when schools are closed than when schools are in session; and, if energy savings by schools during a…

  10. The impact of state energy programs and other contextual factors on U.S. buildings energy consumption

    NASA Astrophysics Data System (ADS)

    Ofori-Boadu, Andrea N. Y. A.

    High energy consumption in the United States has been influenced by populations, climates, income and other contextual factors. In the past decades, U.S. energy policies have pursued energy efficiency as a national strategy for reducing U.S. environmental degradation and dependence on foreign oils. The quest for improved energy efficiency has led to the development of energy efficient technologies and programs. The implementation of energy programs in the complex U.S. socio-technical environment is believed to promote the diffusion of energy efficiency technologies. However, opponents doubt the fact that these programs have the capacity to significantly reduce U.S. energy consumption. In order to contribute to the ongoing discussion, this quantitative study investigated the relationships existing among electricity consumption/ intensity, energy programs and contextual factors in the U.S. buildings sector. Specifically, this study sought to identify the significant predictors of electricity consumption and intensity, as well as estimate the overall impact of selected energy programs on electricity consumption and intensity. Using state-level secondary data for 51 U.S. states from 2006 to 2009, seven random effects panel data regression models confirmed the existence of significant relationships among some energy programs, contextual factors, and electricity consumption/intensity. The most significant predictors of improved electricity efficiency included the price of electricity, public benefits funds program, building energy codes program, financial and informational incentives program and the Leadership in Energy and Environmental Design (LEED) program. Consistently, the Southern region of the U.S. was associated with high electricity consumption and intensity; while the U.S. commercial sector was the greater benefactor from energy programs. On the average, energy programs were responsible for approximately 7% of the variation observed in electricity consumption

  11. Offer versus Serve or Serve Only: Does Service Method Affect Elementary Children's Fruit and Vegetable Consumption?

    ERIC Educational Resources Information Center

    Goggans, Margaret Harbison; Lambert, Laurel; Chang, Yunhee

    2011-01-01

    Purpose/Objectives: The purpose of this study was to determine if the use of the Offer versus Serve (OVS) provision in the National School Lunch Program would result in a significant difference in fruit and vegetable consumption by fourth and fifth grade elementary students, and in plate waste cost. Methods: Weighed and visual plate waste data…

  12. A new procedure to analyze the effect of air changes in building energy consumption

    PubMed Central

    2014-01-01

    Background Today, the International Energy Agency is working under good practice guides that integrate appropriate and cost effective technologies. In this paper a new procedure to define building energy consumption in accordance with the ISO 13790 standard was performed and tested based on real data from a Spanish region. Results Results showed that the effect of air changes on building energy consumption can be defined using the Weibull peak function model. Furthermore, the effect of climate change on building energy consumption under several different air changes was nearly nil during the summer season. Conclusions The procedure obtained could be the much sought-after solution to the problem stated by researchers in the past and future research works relating to this new methodology could help us define the optimal improvement in real buildings to reduce energy consumption, and its related carbon dioxide emissions, at minimal economical cost. PMID:24456655

  13. Short-Term Energy Outlook Model Documentation: Other Petroleum Products Consumption Model

    EIA Publications

    2011-01-01

    The other petroleum product consumption module of the Short-Term Energy Outlook (STEO) model is designed to provide U.S. consumption forecasts for 6 petroleum product categories: asphalt and road oil, petrochemical feedstocks, petroleum coke, refinery still gas, unfinished oils, and other miscvellaneous products

  14. Territorial approach to increased energy consumption of water extraction from depletion of a highlands Mexican aquifer.

    PubMed

    Fonseca, Carlos Roberto; Esteller, María Vicenta; Díaz-Delgado, Carlos

    2013-10-15

    This work proposes a method to estimate increased energy consumption of pumping caused by a drawdown of groundwater level and the equivalent energy consumption of the motor-pump system in an aquifer under intensive exploitation. This method has been applied to the Valley of Toluca aquifer, located in the Mexican highlands, whose intensive exploitation is reflected in a decline in the groundwater level of between 0.10 and 1.6 m/year. Results provide a summary of energy consumption and a map of energy consumption isopleths showing the areas that are most susceptible to increases in energy consumption due to pumping. The proposed method can be used to estimate the effect of the intensive exploitation of the Valley of Toluca aquifer on the energy consumption of groundwater extraction. Finding reveals that, for the year 2006, groundwater extraction in the urban zone required 2.39 times more energy than the conditions observed 38 years earlier. In monetary terms, this reflects an increase of USD$ 3 million annually, according to 2005 energy production costs.

  15. Is more always better? The nonlinear relationship between energy consumption and wellbeing

    NASA Astrophysics Data System (ADS)

    Vaughan Winfrey, Elise Marie

    Policymakers today face rapidly expanding world populations, increasing evidence of environmental degradation and climate change, and mounting economic crises. In this context, they are grappling with the challenge of balancing environmental concerns, economic viability, and the wellbeing of their citizens. Because energy consumption has both positive and negative wellbeing implications, it is unclear whether societal goals to raise standards of living through energy-intensive lifestyles conflict with the social, economic, environmental, and health dimensions of broader wellbeing aspirations. Though there has been a significant amount of research on the long-run environmental consequences of increasing aggregate world energy demand, there is a lack of direct evidence on the relationship between energy consumption and wellbeing. This paper attempts to improve our understanding of the net wellbeing consequences of energy consumption. Specifically, it examines whether there is a nonlinear relationship between per capita energy consumption, as measured alternatively by CO2 emissions (metric tons per capita), electricity consumption (kWh per capita), and total energy consumption (kg of oil equivalent per capita), and wellbeing, as measured by individual life satisfaction aggregated at the country level. Panel and cross-sectional regression analyses are conducted using data from the Gallup World Poll (GWP), integrated European and World Values Surveys (WVS-EVS), and the World Bank DataBank (WBDB). Despite the classic economic assumption that more is always better, this analysis indicates that increasing energy consumption is not always associated with wellbeing improvements. The empirical results provide some suggestive evidence that life satisfaction gains associated with energy consumption may eventually be counterbalanced by the related human and environmental costs. This is valuable information for policymakers trying to balance environmental, energy-security, and

  16. The impact of relative energy prices on industrial energy consumption in China: a consideration of inflation costs.

    PubMed

    He, Lingyun; Ding, Zhihua; Yin, Fang; Wu, Meng

    2016-01-01

    Significant effort has been exerted on the study of economic variables such as absolute energy prices to understand energy consumption and economic growth. However, this approach ignores general inflation effects, whereby the prices of baskets of goods may rise or fall at different rates from those of energy prices. Thus, it may be the relative energy price, not the absolute energy price, that has most important effects on energy consumption. To test this hypothesis, we introduce a new explanatory variable, the domestic relative energy price, which we define as "the ratio of domestic energy prices to the general price level of an economy," and we test the explanatory power of this new variable. Thus, this paper explores the relationship between relative energy prices and energy consumption in China from the perspective of inflation costs over the period from 1988 to 2012. The direct, regulatory and time-varying effects are captured using methods such as ridge regression and the state-space model. The direct impacts of relative energy prices on total energy consumption and intensity are -0.337 and -0.250, respectively; the effects of comprehensive regulation on energy consumption through the economic structure and the energy structure are -0.144 and -0.148, respectively; and the depressing and upward effects of rising and falling energy prices on energy consumption are 0.3520 and 0.3564, respectively. When economic growth and the energy price level were stable, inflation persisted; thus, rising energy prices benefitted both the economy and the environment. Our analysis is important for policy makers to establish effective energy-pricing policies that ensure both energy conservation and the stability of the pricing system. PMID:27398277

  17. The impact of relative energy prices on industrial energy consumption in China: a consideration of inflation costs.

    PubMed

    He, Lingyun; Ding, Zhihua; Yin, Fang; Wu, Meng

    2016-01-01

    Significant effort has been exerted on the study of economic variables such as absolute energy prices to understand energy consumption and economic growth. However, this approach ignores general inflation effects, whereby the prices of baskets of goods may rise or fall at different rates from those of energy prices. Thus, it may be the relative energy price, not the absolute energy price, that has most important effects on energy consumption. To test this hypothesis, we introduce a new explanatory variable, the domestic relative energy price, which we define as "the ratio of domestic energy prices to the general price level of an economy," and we test the explanatory power of this new variable. Thus, this paper explores the relationship between relative energy prices and energy consumption in China from the perspective of inflation costs over the period from 1988 to 2012. The direct, regulatory and time-varying effects are captured using methods such as ridge regression and the state-space model. The direct impacts of relative energy prices on total energy consumption and intensity are -0.337 and -0.250, respectively; the effects of comprehensive regulation on energy consumption through the economic structure and the energy structure are -0.144 and -0.148, respectively; and the depressing and upward effects of rising and falling energy prices on energy consumption are 0.3520 and 0.3564, respectively. When economic growth and the energy price level were stable, inflation persisted; thus, rising energy prices benefitted both the economy and the environment. Our analysis is important for policy makers to establish effective energy-pricing policies that ensure both energy conservation and the stability of the pricing system.

  18. How energy policies affect public health.

    PubMed

    Romm, J J; Ervin, C A

    1996-01-01

    The connection between energy policy and increased levels of respiratory and cardiopulmonary disease has become clearer in the past few years. People living in cities with high levels of pollution have a higher risk of mortality than those living in less polluted cities. The pollutants most directly linked to increased morbidity and mortality include ozone, particulates, carbon monoxide, sulfur dioxide, volatile organic compounds, and oxides of nitrogen. Energy-related emissions generate the vast majority of these polluting chemicals. Technologies to prevent pollution in the transportation, manufacturing, building, and utility sectors can significantly reduce these emissions while reducing the energy bills of consumers and businesses. In short, clean energy technologies represent a very cost-effective investment in public health. Some 72% of the Federal government's investment in the research, development, and demonstration of pollution prevention technologies is made by the Department of Energy, with the largest share provided by the Office of Energy Efficiency and Renewable Energy. This article will examine the connections between air pollution and health problems and will discuss what the Department of Energy is doing to prevent air pollution now and in the future.

  19. How energy policies affect public health.

    PubMed Central

    Romm, J J; Ervin, C A

    1996-01-01

    The connection between energy policy and increased levels of respiratory and cardiopulmonary disease has become clearer in the past few years. People living in cities with high levels of pollution have a higher risk of mortality than those living in less polluted cities. The pollutants most directly linked to increased morbidity and mortality include ozone, particulates, carbon monoxide, sulfur dioxide, volatile organic compounds, and oxides of nitrogen. Energy-related emissions generate the vast majority of these polluting chemicals. Technologies to prevent pollution in the transportation, manufacturing, building, and utility sectors can significantly reduce these emissions while reducing the energy bills of consumers and businesses. In short, clean energy technologies represent a very cost-effective investment in public health. Some 72% of the Federal government's investment in the research, development, and demonstration of pollution prevention technologies is made by the Department of Energy, with the largest share provided by the Office of Energy Efficiency and Renewable Energy. This article will examine the connections between air pollution and health problems and will discuss what the Department of Energy is doing to prevent air pollution now and in the future. Images p390-a p391-a p392-a p393-a p394-a p395-a p396-a p397-a PMID:8837627

  20. A look at commercial buildings in 1995: Characteristics, energy consumption, and energy expenditures

    SciTech Connect

    1998-10-01

    The commercial sector consists of business establishments and other organizations that provide services. The sector includes service businesses, such as retail and wholesale stores, hotels and motels, restaurants, and hospitals, as well as a wide range of facilities that would not be considered commercial in a traditional economic sense, such as public schools, correctional institutions, and religious and fraternal organizations. Nearly all energy use in the commercial sector takes place in, or is associated with, the buildings that house these commercial activities. Analysis of the structures, activities, and equipment associated with different types of buildings is the clearest way to evaluate commercial sector energy use. The Commercial Buildings Energy Consumption Survey (CBECS) is a national-level sample survey of commercial buildings and their energy suppliers conducted quadrennially (previously triennially) by the Energy Information Administration (EIA). The target population for the 1995 CBECS consisted of all commercial buildings in the US with more than 1,000 square feet of floorspace. Decision makers, businesses, and other organizations that are concerned with the use of energy--building owners and managers, regulators, legislative bodies and executive agencies at all levels of government, utilities and other energy suppliers--are confronted with a buildings sector that is complex. Data on major characteristics (e.g., type of building, size, year constructed, location) collected from the buildings, along with the amount and types of energy the buildings consume, help answer fundamental questions about the use of energy in commercial buildings.

  1. How clustering dark energy affects matter perturbations

    NASA Astrophysics Data System (ADS)

    Mehrabi, A.; Basilakos, S.; Pace, F.

    2015-09-01

    The rate of structure formation in the Universe is different in homogeneous and clustered dark energy models. The degree of dark energy clustering depends on the magnitude of its effective sound speed c2_eff and for c2_eff=0 dark energy clusters in a similar fashion to dark matter while for c2_eff=1 it stays (approximately) homogeneous. In this paper we consider two distinct equations of state for the dark energy component, wd = const and w_d=w_0+w_1(z/1+z) with c2_eff as a free parameter and we try to constrain the dark energy effective sound speed using current available data including Type Ia supernovae, baryon acoustic oscillation, cosmic microwave background shift parameter (Planck and WMAP), Hubble parameter, big bang nucleosynthesis and the growth rate of structures fσ8(z). At first we derive the most general form of the equations governing dark matter and dark energy clustering under the assumption that c2_eff=const. Finally, performing an overall likelihood analysis we find that the likelihood function peaks at c2_eff=0; however, the dark energy sound speed is degenerate with respect to the cosmological parameters, namely Ωm and wd.

  2. Eww she sneezed! Contamination context affects children's food preferences and consumption.

    PubMed

    DeJesus, Jasmine M; Shutts, Kristin; Kinzler, Katherine D

    2015-04-01

    Does contextual information about disgust influence children's food consumption and subjective experience of taste? Three- to eight-year-old children (N = 60) were presented with two identical foods, yet children were led to believe that one food had been contaminated by sneezing and licking, while the other was clean. When given the opportunity to eat the foods, 5- to 8-year-old children consumed more clean food and rated the clean food's taste more positively; younger children did not distinguish between the foods. The relation between contamination and subjective taste held even among children who ate both foods and had direct evidence that they were identical. These data indicate that children's consumption behavior and food preferences are influenced by information external to foods themselves. PMID:25558024

  3. Consumption rate of some proteinic diets affecting hypopharyngeal glands development in honeybee workers

    PubMed Central

    Al-Ghamdi, Ahmad AlKazim; Al-Khaibari, Abeer M.; Omar, Mohamed O.

    2010-01-01

    The experiment was carried out under laboratory condition to study the consumption of some proteinic diets and their effect on hypopharyngeal glands (HPG) development during nursing period. The results showed that the bee bread and the pollen loads mixture with sugar (1:1) were more consumed by honeybee workers followed by Nectapol® and Yeast-Gluten mixture. The lowest consumption amount was recorded with traditional substitute. Clear differences were found in HPG development under feeding with different diets. The maximum development degree was observed when fed with bee bread followed by pollen loads and mixture from Yeast, Gluten and sugar (1:1:2). The acinal surface of HPG showed clear difference under feeding with difference diets. The largest area was recorded when honeybee workers fed on bee bread followed by Yeast-Gluten-sugar mixture (diet,4) and pollen loads(diet,2). PMID:23961106

  4. 10 CFR Appendix Y to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Battery Chargers

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix Y to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Battery... consumption. 2. Definitions: The following definitions are for the purposes of understanding...

  5. 10 CFR 431.64 - Uniform test method for the measurement of energy consumption of commercial refrigerators...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumption of commercial refrigerators, freezers, and refrigerator-freezers. 431.64 Section 431.64 Energy... method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator... energy consumption in kilowatt hours per day (kWh/day) for a given product category and volume or...

  6. 10 CFR 431.64 - Uniform test method for the measurement of energy consumption of commercial refrigerators...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... consumption of commercial refrigerators, freezers, and refrigerator-freezers. 431.64 Section 431.64 Energy... method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator... energy consumption in kilowatt hours per day (kWh/day) for a given product category and volume or...

  7. 10 CFR Appendix X to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers X Appendix X to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix X to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption...

  8. 10 CFR 431.204 - Uniform test method for the measurement of energy consumption of illuminated exit signs.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform test method for the measurement of energy consumption of illuminated exit signs. 431.204 Section 431.204 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION... Procedures § 431.204 Uniform test method for the measurement of energy consumption of illuminated exit...

  9. 10 CFR Appendix F to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Room Air Conditioners

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption of Room Air Conditioners F Appendix F to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix F to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Room...

  10. 10 CFR 431.204 - Uniform test method for the measurement of energy consumption of illuminated exit signs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Uniform test method for the measurement of energy consumption of illuminated exit signs. 431.204 Section 431.204 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION... Procedures § 431.204 Uniform test method for the measurement of energy consumption of illuminated exit...

  11. Embodied energy consumption and carbon emissions evaluation for urban industrial structure optimization

    NASA Astrophysics Data System (ADS)

    Ji, Xi; Chen, Zhanming; Li, Jinkai

    2014-03-01

    Cities are the main material processors associated with industrialization. The development of urban production based on fossil fuels is the major contributor to the rise of greenhouse gas density, and to global warming. The concept of urban industrial structure optimization is considered to be a solution to urban sustainable development and global climate issues. Enforcing energy conservation and reducing carbon emissions are playing key roles in addressing these issues. As such, quantitative accounting and the evaluation of energy consumption and corresponding carbon emissions, which are by-products of urban production, are critical, in order to discover potential opportunities to save energy and to reduce emissions. Conventional evaluation indicators, such as "energy consumption per unit output value" and "emissions per unit output value", are concerned with immediate consumptions and emissions; while the indirect consumptions and emissions that occur throughout the supply chain are ignored. This does not support the optimization of the overall urban industrial system. To present a systematic evaluation framework for cities, this study constructs new evaluation indicators, based on the concepts of "embodied energy" and "embodied carbon emissions", which take both the immediate and indirect effects of energy consumption and emissions into account. Taking Beijing as a case, conventional evaluation indicators are compared with the newly constructed ones. Results show that the energy consumption and emissions of urban industries are represented better by the new indicators than by conventional indicators, and provide useful information for urban industrial structure optimization.

  12. Factors affecting tea consumption pattern in an urban society in Isfahan, Iran

    PubMed Central

    Rezaee, Elahe; Mirlohi, Maryam; Hassanzadeh, Akbar; Fallah, Azizolah

    2016-01-01

    Objective: To determine the tea consumption pattern in an urban society in Isfahan. Methods: A descriptive, cross-sectional survey was carried out using questioner among 664 households who were selected by two steps cluster sampling. A questionnaire was developed including demographic questions, information on the quantity of tea intake by every member of the family, tea type, and tea brand preference. Results: The individuals who prioritized black tea as their 1st choice were 90.1% of the total surveyed community. The average amount of tea consumed was calculated as 1243 ± 530 ml/day. The individuals who were between 36 and 45 and <15 years old were shown as the highest and the lowest tea consumers, respectively. Men significantly consumed more amount of tea than women did and married participants significantly used more amount of tea than singles (P < 0.05). The number of the family members, though, had no impact on tea consumption (P > 0.05). Brand preference of tea showed that the individuals who prioritized Ahmed brand as their 1st choice constituted 44% of the total participants. Conclusion: Tea consumption pattern in an Iranian sample is specific. Despite of the huge evidence on the green tea benefits, this type of tea has very low popularity and among the available black tea brands, the imported ones are the most preferred. PMID:27500166

  13. An analysis of household energy use by racial/ethnic composition: Consumption, efficiency, and lifestyles

    NASA Astrophysics Data System (ADS)

    Valenzuela, Carlos

    The goal of this dissertation is to provide the most recent household energy consumption analysis by racial/ethnic household composition. This dissertation found that significant differences in behavior, energy consumption, and energy efficiency exist by racial/ethnic household composition. The models suggest that behavioral energy intensity is lower among households led by racial/ethnic minorities. Energy consumption and efficiency models suggest that Hispanic households consume less energy and are more efficient, while Black households consume more energy and are less efficient, than White households. However, when stratifying the models by housing vintage, the differences between Hispanic and White households are not consistent. Differences between Black and White households are evident only among those in housing units built before 1980, indicating that Black households in older vintages live in less efficient housing units and could be at a disadvantage that could result in having to pay a higher share of household income on energy use. Results also point towards evidence that energy efficiency standards since the late 1970s could have actually mitigated potential inequality associated with excess energy use by race/ethnicity. Improving energy efficiency of housing units may be beneficial not only to reduce total energy consumption levels, but also have the potential to lessen the burden of energy costs that lower income households (irrespective of race/ethnicity) might experience otherwise.

  14. Trophic disruption: a meta-analysis of how habitat fragmentation affects resource consumption in terrestrial arthropod systems.

    PubMed

    Martinson, Holly M; Fagan, William F

    2014-09-01

    Habitat fragmentation is a complex process that affects ecological systems in diverse ways, altering everything from population persistence to ecosystem function. Despite widespread recognition that habitat fragmentation can influence food web interactions, consensus on the factors underlying variation in the impacts of fragmentation across systems remains elusive. In this study, we conduct a systematic review and meta-analysis to quantify the effects of habitat fragmentation and spatial habitat structure on resource consumption in terrestrial arthropod food webs. Across 419 studies, we found a negative overall effect of fragmentation on resource consumption. Variation in effect size was extensive but predictable. Specifically, resource consumption was reduced on small, isolated habitat fragments, higher at patch edges, and neutral with respect to landscape-scale spatial variables. In general, resource consumption increased in fragmented settings for habitat generalist consumers but decreased for specialist consumers. Our study demonstrates widespread disruption of trophic interactions in fragmented habitats and describes variation among studies that is largely predictable based on the ecological traits of the interacting species. We highlight future prospects for understanding how changes in spatial habitat structure may influence trophic modules and food webs.

  15. [Trend of "zero energy consumption and wastewater" in fuel ethanol production].

    PubMed

    Mao, Zhonggui; Zhang, Jianhua

    2008-06-01

    The energy consumption in a Chinese ethanol manufacturer with cassava as the feedstock, has been reduced to a zero-closed level. If the R & D on technical integration of high ethanol concentration fermentation, methane fermentation technique, steam and electricity co-generation system, new distillation technology, and the wastewater reutilization, is carried out continuously, the proposed "zero energy consumption and wastewater" technique could be realized in fuel ethanol production process.

  16. Measuring the Efficacy of an Energy and Environmental Awareness Campaign to Effectively Reduce Water Consumption

    ERIC Educational Resources Information Center

    Miller, Laura Little

    2010-01-01

    Increased energy costs and a move toward environmental stewardship are driving many organizations, including universities, to engage in awareness efforts to reduce both energy consumption and their carbon footprint. The purpose of this paper is to determine whether organizational programs aimed at energy and environmental awareness have a…

  17. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... procedures for measuring the energy efficiency of distribution transformers for purposes of EPCA are... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures... 10 Energy 3 2013-01-01 2013-01-01 false Test procedures for measuring energy consumption...

  18. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... procedures for measuring the energy efficiency of distribution transformers for purposes of EPCA are... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures... 10 Energy 3 2012-01-01 2012-01-01 false Test procedures for measuring energy consumption...

  19. 10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... procedures for measuring the energy efficiency of distribution transformers for purposes of EPCA are... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures... 10 Energy 3 2014-01-01 2014-01-01 false Test procedures for measuring energy consumption...

  20. Modeling energy consumption in membrane bioreactors for wastewater treatment in north Africa.

    PubMed

    Skouterisl, George; Arnot, Tom C; Jraou, Mouna; Feki, Firas; Sayadi, Sami

    2014-03-01

    Two pilot-scale membrane bioreactors were operated alongside a full-sized activated sludge plant in Tunisia in order to compare specific energy demand and treated water quality. Energy consumption rates were measured for the complete membrane bioreactor systems and for their different components. Specific energy demand was measured for the systems and compared with the activated sludge plant, which operated at around 3 kWh m(-3). A model was developed for each membrane bioreactor based on both dynamic and steady-state mass balances, microbial kinetics and stoichiometry, and energy balance. Energy consumption was evaluated as a function of mixed-liquor suspended solids concentration, net permeate fluxes, and the resultant treated water quality. This work demonstrates the potential for using membrane bioreactors in decentralised domestic water treatment in North Africa, at energy consumption levels similar or lower than conventional activated sludge systems, with the added benefit of producing treated water suitable for unrestricted crop irrigation.

  1. A Model for Education: Energy-Water Consumption Decision Making.

    ERIC Educational Resources Information Center

    Bontrager, Ralph L.; Hubbard, Charles W.

    Public schools are in a position to convince society-at-large of the national energy problem. There is a direct relationship between energy costs to the schools and the type of educational programs they can provide. While waiting for a national energy policy with a section devoted to schools, districts can calculate the amount and cost of energy…

  2. Video game console usage and US national energy consumption: Results from a field-metering study

    SciTech Connect

    Desroches, Louis-Benoit; Greenblatt, Jeffery B.; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah K.; Young, Scott J.; Donovan, Sally M.; Ganeshalingam, Mohan

    2014-10-23

    There has been an increased in attention placed on the energy consumption of miscellaneous electronic loads in buildings by energy analysts and policymakers in recent years. The share of electricity consumed by consumer electronics in US households has increased in the last decade. Many devices, however, lack robust energy use data, making energy consumption estimates difficult and uncertain. Video game consoles are high-performance machines present in approximately half of all households and can consume a considerable amount of power. The precise usage of game consoles has significant uncertainty, however, leading to a wide range of recent national energy consumption estimates. We present here an analysis based on field-metered usage data, collected as part of a larger field metering study in the USA. This larger study collected data from 880 households in 2012 on a variety of devices, including 113 game consoles (the majority of which are Generation 7 consoles). From our metering, we find that although some consoles are left on nearly 24 h/day, the overall average usage is lower than many other studies have assumed, leading to a US national energy consumption estimate of 7.1 TWh in 2012. Nevertheless, there is an opportunity to reduce energy use with proper game console power management, as a substantial amount of game console usage occurs with the television turned off. The emergence of Generation 8 consoles may increase national energy consumption.

  3. Video game console usage and US national energy consumption: Results from a field-metering study

    DOE PAGES

    Desroches, Louis-Benoit; Greenblatt, Jeffery B.; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah K.; Young, Scott J.; Donovan, Sally M.; et al

    2014-10-23

    There has been an increased in attention placed on the energy consumption of miscellaneous electronic loads in buildings by energy analysts and policymakers in recent years. The share of electricity consumed by consumer electronics in US households has increased in the last decade. Many devices, however, lack robust energy use data, making energy consumption estimates difficult and uncertain. Video game consoles are high-performance machines present in approximately half of all households and can consume a considerable amount of power. The precise usage of game consoles has significant uncertainty, however, leading to a wide range of recent national energy consumption estimates.more » We present here an analysis based on field-metered usage data, collected as part of a larger field metering study in the USA. This larger study collected data from 880 households in 2012 on a variety of devices, including 113 game consoles (the majority of which are Generation 7 consoles). From our metering, we find that although some consoles are left on nearly 24 h/day, the overall average usage is lower than many other studies have assumed, leading to a US national energy consumption estimate of 7.1 TWh in 2012. Nevertheless, there is an opportunity to reduce energy use with proper game console power management, as a substantial amount of game console usage occurs with the television turned off. The emergence of Generation 8 consoles may increase national energy consumption.« less

  4. Consumption of garlic positively affects hedonic perception of axillary body odour.

    PubMed

    Fialová, Jitka; Roberts, S Craig; Havlíček, Jan

    2016-02-01

    Beneficial health properties of garlic, as well as its most common adverse effect - distinctive breath odour - are well-known. In contrast, analogous research on the effect of garlic on axillary odour is currently missing. Here, in three studies varying in the amount and nature of garlic provided (raw garlic in study 1 and 2, garlic capsules in study 3), we tested the effect of garlic consumption on the quality of axillary odour. A balanced within-subject experimental design was used. In total, 42 male odour donors were allocated to either a "garlic" or "non-garlic" condition, after which they wore axillary pads for 12 h to collect body odour. One week later, the conditions were reversed. Odour samples were then judged for their pleasantness, attractiveness, masculinity and intensity by 82 women. We found no significant differences in ratings of any characteristics in study 1. However, the odour of donors after an increased garlic dosage was assessed as significantly more pleasant, attractive and less intense (study 2), and more attractive and less intense in study 3. Our results indicate that garlic consumption may have positive effects on perceived body odour hedonicity, perhaps due to its health effects (e.g., antioxidant properties, antimicrobial activity). PMID:26551789

  5. Consumption of garlic positively affects hedonic perception of axillary body odour.

    PubMed

    Fialová, Jitka; Roberts, S Craig; Havlíček, Jan

    2016-02-01

    Beneficial health properties of garlic, as well as its most common adverse effect - distinctive breath odour - are well-known. In contrast, analogous research on the effect of garlic on axillary odour is currently missing. Here, in three studies varying in the amount and nature of garlic provided (raw garlic in study 1 and 2, garlic capsules in study 3), we tested the effect of garlic consumption on the quality of axillary odour. A balanced within-subject experimental design was used. In total, 42 male odour donors were allocated to either a "garlic" or "non-garlic" condition, after which they wore axillary pads for 12 h to collect body odour. One week later, the conditions were reversed. Odour samples were then judged for their pleasantness, attractiveness, masculinity and intensity by 82 women. We found no significant differences in ratings of any characteristics in study 1. However, the odour of donors after an increased garlic dosage was assessed as significantly more pleasant, attractive and less intense (study 2), and more attractive and less intense in study 3. Our results indicate that garlic consumption may have positive effects on perceived body odour hedonicity, perhaps due to its health effects (e.g., antioxidant properties, antimicrobial activity).

  6. Numerical prediction of energy consumption in buildings with controlled interior temperature

    SciTech Connect

    Jarošová, P.; Št’astník, S.

    2015-03-10

    New European directives bring strong requirement to the energy consumption of building objects, supporting the renewable energy sources. Whereas in the case of family and similar houses this can lead up to absurd consequences, for building objects with controlled interior temperature the optimization of energy demand is really needed. The paper demonstrates the system approach to the modelling of thermal insulation and accumulation abilities of such objetcs, incorporating the significant influence of additional physical processes, as surface heat radiation and moisture-driven deterioration of insulation layers. An illustrative example shows the numerical prediction of energy consumption of a freezing plant in one Central European climatic year.

  7. Energy consumption and expenditure projections by income quintile on the basis of the Annual Energy Outlook 1997 forecast

    SciTech Connect

    Poyer, D.A.; Allison, T.

    1998-03-01

    This report presents an analysis of the relative impacts of the base-case scenario used in the Annual Energy Outlook 1997, published by the US Department of Energy, Energy Information Administration, on income quintile groups. Projected energy consumption and expenditures, and projected energy expenditures as a share of income, for the period 1993 to 2015 are reported. Projected consumption of electricity, natural gas, distillate fuel, and liquefied petroleum gas over this period is also reported for each income group. 33 figs., 11 tabs.

  8. Prey consumption and energy transfer by marine birds in the Gulf of Alaska

    USGS Publications Warehouse

    Hunt, G.L.; Drew, G.S.; Jahncke, J.; Piatt, J.F.

    2005-01-01

    We investigated prey consumption by marine birds and their contribution to cross-shelf fluxes in the northern Gulf of Alaska. We utilized data from the North Pacific Pelagic Seabird Database for modeling energy demand and prey consumption. We found that prey consumption by marine birds was much greater over the continental shelf than it was over the basin. Over the shelf, subsurface-foraging marine birds dominated food consumption, whereas over the basin, surface-foraging birds took the most prey biomass. Daily consumption by marine birds during the non-breeding season ("winter") from September through April was greater than daily consumption during the breeding season, between May and August. Over the shelf, shearwaters, murres and, in winter, sea ducks, were the most important consumers. Over the basin, northern fulmars, gulls and kittiwakes predominated in winter and storm-petrels dominated in May to August. Our results suggest that marine birds contribute little to cross-shelf fluxes of energy or matter, but they do remove energy from the marine system through consumption, respiration and migration. ?? 2005 Elsevier Ltd. All rights reserved.

  9. A novel cost based model for energy consumption in cloud computing.

    PubMed

    Horri, A; Dastghaibyfard, Gh

    2015-01-01

    Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment.

  10. Modeling energy consumption of residential furnaces and boilers in U.S. homes

    SciTech Connect

    Lutz, James; Dunham-Whitehead, Camilla; Lekov, Alex; McMahon, James

    2004-02-01

    In 2001, DOE initiated a rulemaking process to consider whether to amend the existing energy efficiency standards for furnaces and boilers. A key factor in DOE's consideration of new standards is their cost-effectiveness to consumers. Determining cost-effectiveness requires an appropriate comparison of the additional first cost of energy efficiency design options with the savings in operating costs. This report describes calculation of equipment energy consumption (fuel and electricity) based on estimated conditions in a sample of homes that are representative of expected furnace and boiler installations. To represent actual houses with furnaces and boilers in the United States, we used a set of houses from the Residential Energy Consumption Survey of 1997 conducted by the Energy Information Administration. Our calculation methodology estimates the energy consumption of alternative (more-efficient) furnaces, if they were to be used in each house in place of the existing equipment. We developed the method of calculation described in this report for non-weatherized gas furnaces. We generalized the energy consumption calculation for this product class to the other furnace product classes. Fuel consumption calculations for boilers are similar to those for the other furnace product classes. The electricity calculations for boilers are simpler than for furnaces, because boilers do not provide thermal distribution for space cooling as furnaces often do.

  11. A novel cost based model for energy consumption in cloud computing.

    PubMed

    Horri, A; Dastghaibyfard, Gh

    2015-01-01

    Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. PMID:25705716

  12. A Novel Cost Based Model for Energy Consumption in Cloud Computing

    PubMed Central

    Horri, A.; Dastghaibyfard, Gh.

    2015-01-01

    Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. PMID:25705716

  13. Alcoa Teams with DOE to Reduce Energy Consumption

    SciTech Connect

    2004-05-01

    This is the first in a series of DOE Industrial Technologies Program case studies on corporate energy management. The case study highlights Alcoa Aluminum's successful results and activities through its corporate energy management approach and collaboration with DOE. Case studies in this series will be used to encourage other energy-intensive industrial plants to adopt a corporate strategy, and to promote the concept of replicating results with a company or industry.

  14. Safe Upper-Bounds Inference of Energy Consumption for Java Bytecode Applications

    NASA Technical Reports Server (NTRS)

    Navas, Jorge; Mendez-Lojo, Mario; Hermenegildo, Manuel V.

    2008-01-01

    Many space applications such as sensor networks, on-board satellite-based platforms, on-board vehicle monitoring systems, etc. handle large amounts of data and analysis of such data is often critical for the scientific mission. Transmitting such large amounts of data to the remote control station for analysis is usually too expensive for time-critical applications. Instead, modern space applications are increasingly relying on autonomous on-board data analysis. All these applications face many resource constraints. A key requirement is to minimize energy consumption. Several approaches have been developed for estimating the energy consumption of such applications (e.g. [3, 1]) based on measuring actual consumption at run-time for large sets of random inputs. However, this approach has the limitation that it is in general not possible to cover all possible inputs. Using formal techniques offers the potential for inferring safe energy consumption bounds, thus being specially interesting for space exploration and safety-critical systems. We have proposed and implemented a general frame- work for resource usage analysis of Java bytecode [2]. The user defines a set of resource(s) of interest to be tracked and some annotations that describe the cost of some elementary elements of the program for those resources. These values can be constants or, more generally, functions of the input data sizes. The analysis then statically derives an upper bound on the amount of those resources that the program as a whole will consume or provide, also as functions of the input data sizes. This article develops a novel application of the analysis of [2] to inferring safe upper bounds on the energy consumption of Java bytecode applications. We first use a resource model that describes the cost of each bytecode instruction in terms of the joules it consumes. With this resource model, we then generate energy consumption cost relations, which are then used to infer safe upper bounds. How

  15. The relationship between economic growth, energy consumption, and CO2 emissions: Empirical evidence from China.

    PubMed

    Wang, Shaojian; Li, Qiuying; Fang, Chuanglin; Zhou, Chunshan

    2016-01-15

    Following several decades of rapid economic growth, China has become the largest energy consumer and the greatest emitter of CO2 in the world. Given the complex development situation faced by contemporary China, Chinese policymakers now confront the dual challenge of reducing energy use while continuing to foster economic growth. This study posits that a better understanding of the relationship between economic growth, energy consumption, and CO2 emissions is necessary, in order for the Chinese government to develop the energy saving and emission reduction strategies for addressing the impacts of climate change. This paper investigates the cointegrating, temporally dynamic, and casual relationships that exist between economic growth, energy consumption, and CO2 emissions in China, using data for the period 1990-2012. The study develops a comprehensive conceptual framework in order to perform this analysis. The results of cointegration tests suggest the existence of long-run cointegrating relationship among the variables, albeit with short dynamic adjustment mechanisms, indicating that the proportion of disequilibrium errors that can be adjusted in the next period will account for only a fraction of the changes. Further, impulse response analysis (which describes the reaction of any variable as a function of time in response to external shocks) found that the impact of a shock in CO2 emissions on economic growth or energy consumption was only marginally significant. Finally, Granger casual relationships were found to exist between economic growth, energy consumption, and CO2 emissions; specifically, a bi-directional causal relationship between economic growth and energy consumption was identified, and a unidirectional causal relationship was found to exist from energy consumption to CO2 emissions. The findings have significant implications for both academics and practitioners, warning of the need to develop and implement long-term energy and economic policies in

  16. Household energy consumption in the United States, 1987 to 2009: Socioeconomic status, demographic composition, and energy services profiles

    NASA Astrophysics Data System (ADS)

    Kemp, Robert J.

    This dissertation examines household energy consumption in the United States over the period of 1987 to 2009, specifically focusing on the role of socioeconomic status, demographic composition, and energy services profiles. The dissertation makes use of four cross-sections from the Residential Energy Consumption Survey data series to examine how household characteristics influence annual energy consumption overall, and by fuel type. Chapter 4 shows that household income is positively related to energy consumption, but more so for combustible fuel consumption than for electricity consumption. Additionally, results for educational attainment suggest a less cross-sectional association and more longitudinal importance as related to income. Demographic composition matters, as predicted by the literature; household size and householder age show predicted effects, but when considered together, income explains any interaction between age and household size. Combustible fuels showed a far greater relationship to housing unit size and income, whereas electricity consumption was more strongly related to educational attainment, showing important differences in the associations by fuel type. Taken together, these results suggest a life course-based model for understanding energy consumption that may be strongly linked to lifestyles. Chapter 5 extends the findings in Chapter 4 by examining the patterning of physical characteristics and behaviors within households. The chapter uses Latent Class Analysis to examine a broad set of energy significant behaviors and characteristics to discover five unique energy services profiles. These profiles are uniquely patterned across demographic and socioeconomic compositions of households and have important effects on energy consumption. These profiles are likely byproducts of the lifestyles in which the household takes part, due to factors such as their socioeconomic status and household demographic composition. Overall, the dissertation

  17. Causality between energy consumption, emissions of CO{sub 2} and surface air temperature

    SciTech Connect

    Mariam, Y.K.G.; Barre, M.

    1998-12-31

    Climate research has been one of the focal points of the scientific community for the past few decades. However, most of the studies tended to examine the scientific basis to understand the mechanisms that resulted in changes in global climate. There was less emphasis on issues of mitigating the causes of climate change. Due to the fact that climate change is primarily the result of emission of green houses gases, especially carbon dioxide, and due to the fact that most these emissions are anthropogenic, social scientists have to address strategies in which emissions are reduced. Of particular significance is that global climate is a common good. Private companies and individuals, in an effort to maximize income or welfare, dump increased emission to the atmosphere. As a typical example of the classic work of the tragedy of the commons, there is a desperate need for all disciplines of the social and natural sciences to develop ways of mitigating the dangers of changes in the global common climate. Energy consumption, particularly fossil fuels, has been attributed as the driving force for the increased emission of CO{sub 2} and rise in global surface air temperature. While many studies have been carried out regarding the relationship between global energy consumption, emissions of CO{sub 2} and indicators of climate change such as temperature, there are only a few studies that have examined linkages between these factors at the level of individual countries. Increased consumption of carbon-intensive sources of energy will continue to exacerbate existing climate change problems. On the other hand, not only will energy consumption influence climate change but also changes in climate change may influence the patterns of energy consumption. The objectives of this research are to examine trends in energy consumption and emissions of CO{sub 2}, and causal linkages between energy consumption, emission of CO{sub 2} and mean annual surface temperature for 21 OECD countries.

  18. Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction.

    PubMed

    Wu, Wei; Chen, Guiming; Fan, Boxuan; Liu, Jianyou

    2016-01-01

    Energy consumption and tribological properties could be improved by proper design of surface texture in friction. However, some literature focused on investigating their performance under high temperature. In the study, different groove surface textures were fabricated on steels by a laser machine, and their tribological behaviors were experimentally studied with the employment of the friction and wear tester under distinct high temperature and other working conditions. The friction coefficient was recorded, and wear performance were characterized by double light interference microscope, scanning electron microscope (SEM) and x-ray energy dispersive spectrometry (EDS). Then, the performances of energy consumptions were carefully estimated. Results showed that friction coefficient, wear, and energy consumption could almost all be reduced by most textures under high temperature conditions, but to a different extent which depends on the experimental conditions and texture parameters. The main improvement mechanisms were analyzed, such as the hardness change, wear debris storage, thermal stress release and friction induced temperature reduction by the textures. Finally, a scattergram of the relatively reduced ratio of the energy consumption was drawn for different surface textures under four distinctive experimental conditions to illustrate the comprehensive energy consumption improving ability of textures, which was of benefit for the application of texture design. PMID:27035658

  19. Balancing Energy Consumption with Hybrid Clustering and Routing Strategy in Wireless Sensor Networks †

    PubMed Central

    Xu, Zhezhuang; Chen, Liquan; Liu, Ting; Cao, Lianyang; Chen, Cailian

    2015-01-01

    Multi-hop data collection in wireless sensor networks (WSNs) is a challenge issue due to the limited energy resource and transmission range of wireless sensors. The hybrid clustering and routing (HCR) strategy has provided an effective solution, which can generate a connected and efficient cluster-based topology for multi-hop data collection in WSNs. However, it suffers from imbalanced energy consumption, which results in the poor performance of the network lifetime. In this paper, we evaluate the energy consumption of HCR and discover an important result: the imbalanced energy consumption generally appears in gradient k=1, i.e., the nodes that can communicate with the sink directly. Based on this observation, we propose a new protocol called HCR-1, which includes the adaptive relay selection and tunable cost functions to balance the energy consumption. The guideline of setting the parameters in HCR-1 is provided based on simulations. The analytical and numerical results prove that, with minor modification of the topology in gradient k=1, the HCR-1 protocol effectively balances the energy consumption and prolongs the network lifetime. PMID:26492248

  20. Balancing energy consumption with hybrid clustering and routing strategy in wireless sensor networks.

    PubMed

    Xu, Zhezhuang; Chen, Liquan; Liu, Ting; Cao, Lianyang; Chen, Cailian

    2015-01-01

    Multi-hop data collection in wireless sensor networks (WSNs) is a challenge issue due to the limited energy resource and transmission range of wireless sensors. The hybrid clustering and routing (HCR) strategy has provided an effective solution, which can generate a connected and efficient cluster-based topology for multi-hop data collection in WSNs. However, it suffers from imbalanced energy consumption, which results in the poor performance of the network lifetime. In this paper, we evaluate the energy consumption of HCR and discover an important result: the imbalanced energy consumption generally appears in gradient k = 1, i.e., the nodes that can communicate with the sink directly. Based on this observation, we propose a new protocol called HCR-1, which includes the adaptive relay selection and tunable cost functions to balance the energy consumption. The guideline of setting the parameters in HCR-1 is provided based on simulations. The analytical and numerical results prove that, with minor modification of the topology in Sensors 2015, 15 26584 gradient k = 1, the HCR-1 protocol effectively balances the energy consumption and prolongs the network lifetime.

  1. Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction.

    PubMed

    Wu, Wei; Chen, Guiming; Fan, Boxuan; Liu, Jianyou

    2016-01-01

    Energy consumption and tribological properties could be improved by proper design of surface texture in friction. However, some literature focused on investigating their performance under high temperature. In the study, different groove surface textures were fabricated on steels by a laser machine, and their tribological behaviors were experimentally studied with the employment of the friction and wear tester under distinct high temperature and other working conditions. The friction coefficient was recorded, and wear performance were characterized by double light interference microscope, scanning electron microscope (SEM) and x-ray energy dispersive spectrometry (EDS). Then, the performances of energy consumptions were carefully estimated. Results showed that friction coefficient, wear, and energy consumption could almost all be reduced by most textures under high temperature conditions, but to a different extent which depends on the experimental conditions and texture parameters. The main improvement mechanisms were analyzed, such as the hardness change, wear debris storage, thermal stress release and friction induced temperature reduction by the textures. Finally, a scattergram of the relatively reduced ratio of the energy consumption was drawn for different surface textures under four distinctive experimental conditions to illustrate the comprehensive energy consumption improving ability of textures, which was of benefit for the application of texture design.

  2. Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction

    PubMed Central

    Wu, Wei; Chen, Guiming; Fan, Boxuan; Liu, Jianyou

    2016-01-01

    Energy consumption and tribological properties could be improved by proper design of surface texture in friction. However, some literature focused on investigating their performance under high temperature. In the study, different groove surface textures were fabricated on steels by a laser machine, and their tribological behaviors were experimentally studied with the employment of the friction and wear tester under distinct high temperature and other working conditions. The friction coefficient was recorded, and wear performance were characterized by double light interference microscope, scanning electron microscope (SEM) and x-ray energy dispersive spectrometry (EDS). Then, the performances of energy consumptions were carefully estimated. Results showed that friction coefficient, wear, and energy consumption could almost all be reduced by most textures under high temperature conditions, but to a different extent which depends on the experimental conditions and texture parameters. The main improvement mechanisms were analyzed, such as the hardness change, wear debris storage, thermal stress release and friction induced temperature reduction by the textures. Finally, a scattergram of the relatively reduced ratio of the energy consumption was drawn for different surface textures under four distinctive experimental conditions to illustrate the comprehensive energy consumption improving ability of textures, which was of benefit for the application of texture design. PMID:27035658

  3. Estimating Total Energy Consumption and Emissions of China's Commercial and Office Buildings

    SciTech Connect

    Fridley, David; Fridley, David G.; Zheng, Nina; Zhou, Nan

    2008-03-01

    Buildings represent an increasingly important component of China's total energy consumption mix. However, accurately assessing the total volume of energy consumed in buildings is difficult owing to deficiencies in China's statistical collection system and a lack of national surveys. Official statistics suggest that buildings account for about 19% of China's total energy consumption, while others estimate the proportion at 23%, rising to 30% over the next few years. In addition to operational energy, buildings embody the energy used in the in the mining, extraction, harvesting, processing, manufacturing and transport of building materials as well as the energy used in the construction and decommissioning of buildings. This embodied energy, along with a building's operational energy, constitutes the building's life-cycle energy and emissions footprint. This report first provides a review of international studies on commercial building life-cycle energy use from which data are derived to develop an assessment of Chinese commercial building life-cycle energy use, then examines in detail two cases for the development of office building operational energy consumption to 2020. Finally, the energy and emissions implications of the two cases are presented.

  4. Preliminary Analysis of Energy Consumption for Cool Roofing Measures

    SciTech Connect

    Mellot, Joe; Sanyal, Jibonananda; New, Joshua Ryan

    2013-01-01

    The spread of cool roofing has been more than prolific over the last decade. Driven by public demand and by government initiatives cool roofing has been a recognized low cost method to reduce energy demand by reflecting sunlight away from structures and back in to the atmosphere. While much of the country can benefit from the use of cool coatings it remains to be seen whether the energy savings described are appropriate in cooler climates. By use of commonly available calculators one can analyze the potential energy savings based on environmental conditions and construction practices.

  5. Energy drinks consumption practices among medical students of a Private sector University of Karachi, Pakistan.

    PubMed

    Usman, Asma; Bhombal, Swaleha Tariq; Jawaid, Ambreen; Zaki, Samar

    2015-09-01

    Consumption of energy drinks has become popular among students and athletes over the past few years. To explore the phenomenon, a cross-sectional survey was conducted through a self-administered pilot-tested questionnaire. Frequency of energy drinks consumption was found to be 121(52%) in a sample of 233 medical students. Red bull was the most common brand consumed 101(43%). The major reasons reported for its usage were to gain/replenish energy by 36(15.4%), and studying for examination by 34(14.6%). Television was reported as the major source of information 153(66%) followed by friends 113(48%). There was a high frequency of energy drinks' consumption among medical students of a private university. There is a strong need to create awareness regarding these drinks, especially among adolescents and teenagers. PMID:26338750

  6. Energy drinks consumption practices among medical students of a Private sector University of Karachi, Pakistan.

    PubMed

    Usman, Asma; Bhombal, Swaleha Tariq; Jawaid, Ambreen; Zaki, Samar

    2015-09-01

    Consumption of energy drinks has become popular among students and athletes over the past few years. To explore the phenomenon, a cross-sectional survey was conducted through a self-administered pilot-tested questionnaire. Frequency of energy drinks consumption was found to be 121(52%) in a sample of 233 medical students. Red bull was the most common brand consumed 101(43%). The major reasons reported for its usage were to gain/replenish energy by 36(15.4%), and studying for examination by 34(14.6%). Television was reported as the major source of information 153(66%) followed by friends 113(48%). There was a high frequency of energy drinks' consumption among medical students of a private university. There is a strong need to create awareness regarding these drinks, especially among adolescents and teenagers.

  7. Energy consumption and economic development in West Africa

    SciTech Connect

    Chima, C.M.

    1987-01-01

    This study evaluates the commercial energy sector of the Economic Community of West African States (ECOWAS). Presently, an economic union exists between the 16 countries of West Africa that are members of ECOWAS. Although the ECOWAS region has plentiful resources of commercial energy, it faces problems in this sector for two reasons. First is the problem resulting from the diminishing traditional energy resources such as wood fuel and charcoal. Second, most ECOWAS members, except Nigeria, are net importers of commercial energy, and hence face a high import burden for oil. Liquid petroleum is the dominant form of commercial energy used in the ECOWAS despite the availability of other resources. This author basically argues that the best policy and strategy solution for dealing with energy problems is through a combination of regional cooperative effort, and a more-intensive country level. The intensity-of-use hypothesis is tested with case studies of Ghana, the Ivory Coast, and Nigeria. The results indicate that newly developing countries can deviate from the expectations of the hypothesis.

  8. Caffeine consumption around an exercise bout: effects on energy expenditure, energy intake, and exercise enjoyment.

    PubMed

    Schubert, Matthew M; Hall, Susan; Leveritt, Michael; Grant, Gary; Sabapathy, Surendran; Desbrow, Ben

    2014-10-01

    Combining an exercise and nutritional intervention is arguably the optimal method of creating energy imbalance for weight loss. This study sought to determine whether combining exercise and caffeine supplementation was more effective for promoting acute energy deficits and manipulations to substrate metabolism than exercise alone. Fourteen recreationally active participants (mean ± SD body mass index: 22.7 ± 2.6 kg/m2) completed a resting control trial (CON), a placebo exercise trial (EX), and a caffeine exercise trial (EX+CAF, 2 × 3 mg/kg of caffeine 90 min before and 30 min after exercise) in a randomized, double-blinded design. Trials were 4 h in duration with 1 h of rest, 1 h of cycling at ∼65% power at maximum O2 consumption or rest, and a 2-h recovery. Gas exchange, appetite perceptions, and blood samples were obtained periodically. Two hours after exercise, participants were offered an ad libitum test meal where energy and macronutrient intake were recorded. EX+CAF resulted in significantly greater energy expenditure and fat oxidation compared with EX (+250 kJ; +10.4 g) and CON (+3,126 kJ; +29.7 g) (P < 0.05). A trend for reduced energy and fat intake compared with CON (-718 kJ; -8 g) (P = 0.055) was observed. Consequently, EX+CAF created a greater energy deficit (P < 0.05). Caffeine also led to exercise being perceived as less difficult and more enjoyable (P < 0.05). Combining caffeine with exercise creates a greater acute energy deficit, and the implications of this protocol for weight loss or maintenance over longer periods of time in overweight/obese populations should be further investigated. PMID:25123196

  9. Using acceleration characteristics in air quality and energy consumption analyses. Technical report

    SciTech Connect

    Eisele, W.L.; Turner, S.M.; Benz, R.J.

    1996-08-01

    This research investigated the effects of detailed speed and acceleration characteristics on energy consumption utilizing several fuel consumption models. The relationships between speed and acceleration characteristics, geometric characteristics (e.g., number of lanes, signal density, driveway density), and traffic flow variability for various roadways were also investigated. Finally, distributions were produced that summarize the operating characteristics of freeway and arterial streets in Houston, Texas using an electronic distance-measuring instrument (DMI) and the floating car technique.

  10. An Investigation of Energy Consumption and Cost in Large Air-Conditioned Buildings. An Interim Report.

    ERIC Educational Resources Information Center

    Milbank, N. O.

    Two similarly large buildings and air conditioning systems are comparatively analyzed as to energy consumption, costs, and inefficiency during certain measured periods of time. Building design and velocity systems are compared to heating, cooling, lighting and distribution capabilities. Energy requirements for pumps, fans and lighting are found to…

  11. Changes in Natural Gas Monthly Consumption Data Collection and the Short-Term Energy Outlook

    EIA Publications

    2010-01-01

    Beginning with the December 2010 issue of the Short-Term Energy Outlook (STEO), the Energy Information Administration (EIA) will present natural gas consumption forecasts for the residential and commercial sectors that are consistent with recent changes to the Form EIA-857 monthly natural gas survey.

  12. Application of advanced methods for the prognosis of production energy consumption

    NASA Astrophysics Data System (ADS)

    Stetter, R.; Witczak, P.; Staiger, B.; Spindler, C.; Hertel, J.

    2014-12-01

    This paper, based on a current research project, describes the application of advanced methods that are frequently used in fault-tolerance control and addresses the issue of the prognosis of energy efficiency. Today, the energy a product requires during its operation is the subject of many activities in research and development. However, the energy necessary for the production of goods is very often not analysed in comparable depth. In the field of electronics, studies come to the conclusion that about 80% of the total energy used by a product is from its production [1]. The energy consumption in production is determined very early in the product development process by designers and engineers, for example through selection of raw materials, explicit and implicit requirements concerning the manufacturing and assembly processes, or through decisions concerning the product architecture. Today, developers and engineers have at their disposal manifold design and simulation tools which can help to predict the energy consumption during operation relatively accurately. In contrast, tools with the objective to predict the energy consumption in production and disposal are not available. This paper aims to present an explorative study of the use of methods such as Fuzzy Logic to predict the production energy consumption early in the product development process.

  13. Interactions among energy consumption, economic development and greenhouse gas emissions in Japan after World War II

    EPA Science Inventory

    The long-term dynamic changes in the triad, energy consumption, economic development, and Greenhouse gas (GHG) emissions, in Japan after World War II were quantified, and the interactions among them were analyzed based on an integrated suite of energy, emergy and economic indices...

  14. 78 FR 1779 - Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-09

    ... proposes to include a new range for instantaneous electric water heaters (Appendix D6). \\7\\ 77 FR 29940... CFR Part 305 Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and Conservation Act (``Appliance Labeling...

  15. Energy consumption and the unexplained winter warming over northern Asia and North America

    NASA Astrophysics Data System (ADS)

    Zhang, Guang J.; Cai, Ming; Hu, Aixue

    2013-05-01

    The worldwide energy consumption in 2006 was close to 498 exajoules. This is equivalent to an energy convergence of 15.8TW into the populated regions, where energy is consumed and dissipated into the atmosphere as heat. Although energy consumption is sparsely distributed over the vast Earth surface and is only about 0.3% of the total energy transport to the extratropics by atmospheric and oceanic circulations, this anthropogenic heating could disrupt the normal atmospheric circulation pattern and produce a far-reaching effect on surface air temperature. We identify the plausible climate impacts of energy consumption using a global climate model. The results show that the inclusion of energy use at 86 model grid points where it exceeds 0.4Wm-2 can lead to remote surface temperature changes by as much as 1K in mid- and high latitudes in winter and autumn over North America and Eurasia. These regions correspond well to areas with large differences in surface temperature trends between observations and global warming simulations forced by all natural and anthropogenic forcings. We conclude that energy consumption is probably a missing forcing for the additional winter warming trends in observations.

  16. Reducing agitation energy-consumption by improving rheological properties of corn stover substrate in anaerobic digestion.

    PubMed

    Tian, Libin; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Li, Xiujin

    2014-09-01

    Rheological properties of corn stover substrate were investigated to explore agitation energy reduction potential for different total solid (TS) in anaerobic digestion. The effects of particle size and temperature on rheological properties and corresponding energy reduction were studied. The results indicated that corn stover slurry exhibited pseudo-plastic flow behavior at TS of 4.23-7.32%, and was well described by Power-law model. At TS of 4.23%, rheological properties were not obviously affected by particle size and temperature. However, when TS was increased to 7.32%, there was 10.37% shear stress reduction by size-reduction from 20 to 80-mesh, and 11.73% shear stress reduction by temperature-increase from 25 to 55 °C. PTS was advanced as variations of power consumption by TS-increase from 4.23% to 7.32%. There was 9.2% PTS-reduction by size-reduction from 20 to 80-mesh at 35 °C. Moreover, PTS-reduction of 10.3%/10 °C was achieved at 20-mesh compared with 9.0%/10 °C at 80-mesh.

  17. Impact of climatic factors on energy consumption during the heating season

    NASA Astrophysics Data System (ADS)

    Ginzburg, A. S.; Reshetar, O. A.; Belova, I. N.

    2016-09-01

    Global and regional climate changes produce a significant effect on energy production and consumption, especially on heating and air conditioning in residential, industrial, commercial, and office rooms. In Russia, with its contracting climate conditions, energy consumption varies a lot in different regions. Thus, we have to review the dynamics of energy consumption during the cold season individually for each region of the country. We analyzed the dynamics of duration and temperature of the heating season in Moscow region and completed a comparative study of heat energy consumption, actual and calculated based on the 'degreedays' concept, in the municipal economy of Moscow during the last decade. Based on the actual data analysis, we proved that conservation of energy resources in a large city relies not so much on a shortening of the heating period as on the growth of atmospheric air temperature in winter. The projected climate warming in the Moscow region in the nearest decades, along with measures of energy conservation, will promote a significant reduction in energy consumption of the municipal economy in winter. The results shown in this article were obtained in the process of preparing and implementing project no. 16-17-00114 by the Russian Science Foundation "Analysis of an impact of the regional climate change on the residential and commercial energy consumption of Russian megacities," within the main area of focus of the Russian Science Foundation, which is "Fundamental Research and Exploration in Main Topical Areas of Focus." The project was implemented within the framework of the scientific area of focus, which is "Reduction of the Risk and Mitigation of Consequences of Natural and Man-made Disasters" ("Studying Economical, Political, and Social Consequences of Global Climate Changes" problem).

  18. Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions.

    PubMed

    Williams, Daniel R; Tang, Yinshan

    2013-05-01

    Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft's cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

  19. Energy consumption and conservation psychology: A review and conceptual analysis

    NASA Astrophysics Data System (ADS)

    Shippee, Glenn

    1980-07-01

    The burgeoning literature devoted to “the psychology of energy consumption” is categorized by specific methodological approach, is critically reviewed, and is conceptually analyzed. Three main categories of energy research are discerned, these categories corresponding to the traditional methodological typology of the survey study, the field experiment, and the laboratory investigation. For each of these major approaches, several subcategories and special topic areas are noted and discussed. The intention of these conceptual analyses is to stimulate research interest and to provide directions for future research activities. The review concludes with the encouraging observation that several directions can be generalized from the literature. More importantly, these generalizations are corroborated across experiments conducted within each major methodological approach. The importance of behavioral approaches to energy issues and the necessity for additional governmental support for these activities is also emphasized.

  20. Analysis of changes in residential energy consumption, 1973-1980

    SciTech Connect

    King, M.J.; Belzer, D.B.; Callaway, J.M.; Adams, R.C.

    1982-09-01

    The progress of energy conservation in the residential sector since the 1973 to 1974 Arab oil embargo is assessed. To accomplish this goal, the reduction in residential energy use per household since 1973 is disaggregated into six possible factors. The factors considered were: (1) building shell efficiencies, (2) geographic distribution of households, (3) appliance efficiency, (4) size of dwelling units, (5) fuel switching, and (6) consumer attitudes. The most important factor identified was improved building shell efficiency, although the impact of appliance efficiency is growing rapidly. Due to data limitations, PNL was not able to quantify the effects of two factors (size of dwelling units and fuel switching) within the framework of this study. The total amount of the energy reduction explained ranged from 18 to 46% over the years 1974 to 1980.

  1. It's a predator-eat-parasite world: how characteristics of predator, parasite and environment affect consumption.

    PubMed

    Orlofske, Sarah A; Jadin, Robert C; Johnson, Pieter T J

    2015-06-01

    Understanding the effects of predation on disease dynamics is increasingly important in light of the role ecological communities can play in host-parasite interactions. Surprisingly, however, few studies have characterized direct predation of parasites. Here we used an experimental approach to show that consumption of free-living parasite stages is highly context dependent, with significant influences of parasite size, predator size and foraging mode, as well as environmental condition. Among the four species of larval trematodes and two types of predators (fish and larval damselflies) studied here, parasites with larger infective stages (size >1,000 μm) were most vulnerable to predation by fish, while small-bodied fish and damselflies (size <10 mm) consumed the most infectious stages. Small parasite species (size approx. 500 μm) were less frequently consumed by both fish and larval damselflies. However, these results depended strongly on light availability; trials conducted in the dark led to significantly fewer parasites consumed overall, especially those with a size of <1,000 μm, emphasizing the importance of circadian shedding times of parasite free-living stages for predation risk. Intriguingly, active predation functioned to help limit fishes' infection by directly penetrating parasite species. Our results are consistent with established theory developed for predation on zooplankton that emphasizes the roles of body size, visibility and predation modes and further suggest that consumer-resource theory may provide a predictive framework for when predators should significantly influence parasite transmission. These results contribute to our understanding of transmission in natural systems, the role of predator-parasite links in food webs and the evolution of parasite morphology and behavior.

  2. It's a predator-eat-parasite world: how characteristics of predator, parasite and environment affect consumption.

    PubMed

    Orlofske, Sarah A; Jadin, Robert C; Johnson, Pieter T J

    2015-06-01

    Understanding the effects of predation on disease dynamics is increasingly important in light of the role ecological communities can play in host-parasite interactions. Surprisingly, however, few studies have characterized direct predation of parasites. Here we used an experimental approach to show that consumption of free-living parasite stages is highly context dependent, with significant influences of parasite size, predator size and foraging mode, as well as environmental condition. Among the four species of larval trematodes and two types of predators (fish and larval damselflies) studied here, parasites with larger infective stages (size >1,000 μm) were most vulnerable to predation by fish, while small-bodied fish and damselflies (size <10 mm) consumed the most infectious stages. Small parasite species (size approx. 500 μm) were less frequently consumed by both fish and larval damselflies. However, these results depended strongly on light availability; trials conducted in the dark led to significantly fewer parasites consumed overall, especially those with a size of <1,000 μm, emphasizing the importance of circadian shedding times of parasite free-living stages for predation risk. Intriguingly, active predation functioned to help limit fishes' infection by directly penetrating parasite species. Our results are consistent with established theory developed for predation on zooplankton that emphasizes the roles of body size, visibility and predation modes and further suggest that consumer-resource theory may provide a predictive framework for when predators should significantly influence parasite transmission. These results contribute to our understanding of transmission in natural systems, the role of predator-parasite links in food webs and the evolution of parasite morphology and behavior. PMID:25648648

  3. Effectiveness of In-Home Feedback Devices in Conjunction with Energy Use Information on Residential Energy Consumption

    NASA Astrophysics Data System (ADS)

    Rungta, Shaily

    Residential energy consumption accounts for 22% of the total energy use in the United States. The consumer's perception of energy usage and conservation are very inaccurate which is leading to growing number of individuals who try to seek out ways to use energy more wisely. Hence behavioral change in consumers with respect to energy use, by providing energy use feedback may be important in reducing home energy consumption. Real-time energy information feedback delivered via technology along with feedback interventions has been reported to produce up to 20 percent declines in residential energy consumption through past research and pilot studies. There are, however, large differences in the estimates of the effect of these different types of feedback on energy use. As part of the Energize Phoenix Program, (a U.S. Department of Energy funded program), a Dashboard Study was conducted by the Arizona State University to estimate the impact of real-time, home-energy displays in conjunction with other feedback interventions on the residential rate of energy consumption in Phoenix, while also creating awareness and encouragement to households to reduce energy consumption. The research evaluates the effectiveness of these feedback initiatives. In the following six months of field experiment, a selected number of low-income multi-family apartments in Phoenix, were divided in three groups of feedback interventions, where one group received residential energy use related education and information, the second group received the same education as well as was equipped with the in-home feedback device and the third was given the same education, the feedback device and added budgeting information. Results of the experiment at the end of the six months did not lend a consistent support to the results from literature and past pilot studies. The data revealed a statistically insignificant reduction in energy consumption for the experiment group overall and inconsistent results for

  4. China's transportation energy consumption and CO2 emissions from a global perspective

    SciTech Connect

    Yin, Xiang; Chen, Wenying; Eom, Jiyong; Clarke, Leon E.; Kim, Son H.; Patel, Pralit L.; Yu, Sha; Kyle, G. Page

    2015-07-01

    ABSTRACT Rapidly growing energy demand from China's transportation sector in the last two decades have raised concerns over national energy security, local air pollution, and carbon dioxide (CO2) emissions, and there is broad consensus that China's transportation sector will continue to grow in the coming decades. This paper explores the future development of China's transportation sector in terms of service demands, final energy consumption, and CO2 emissions, and their interactions with global climate policy. This study develops a detailed China transportation energy model that is nested in an integrated assessment model—Global Change Assessment Model (GCAM)—to evaluate the long-term energy consumption and CO2 emissions of China's transportation sector from a global perspective. The analysis suggests that, without major policy intervention, future transportation energy consumption and CO2 emissions will continue to rapidly increase and the transportation sector will remain heavily reliant on fossil fuels. Although carbon price policies may significantly reduce the sector's energy consumption and CO2 emissions, the associated changes in service demands and modal split will be modest, particularly in the passenger transport sector. The analysis also suggests that it is more difficult to decarbonize the transportation sector than other sectors of the economy, primarily owing to its heavy reliance on petroleum products.

  5. Complementary effects of torrefaction and co-pelletization: Energy consumption and characteristics of pellets.

    PubMed

    Cao, Liang; Yuan, Xingzhong; Li, Hui; Li, Changzhu; Xiao, Zhihua; Jiang, Longbo; Huang, Binbin; Xiao, Zhihong; Chen, Xiaohong; Wang, Hou; Zeng, Guangming

    2015-06-01

    In this study, complementary of torrefaction and co-pelletization for biomass pellets production was investigated. Two kinds of biomass materials were torrefied and mixed with oil cake for co-pelletization. The energy consumption during pelletization and pellet characteristics including moisture absorption, pellet density, pellet strength and combustion characteristic, were evaluated. It was shown that torrefaction improved the characteristics of pellets with high heating values, low moisture absorption and well combustion characteristic. Furthermore, co-pelletization between torrefied biomass and cater bean cake can reduce several negative effects of torrefaction such as high energy consumption, low pellet density and strength. The optimal conditions for energy consumption and pellet strength were torrefied at 270°C and a blending with 15% castor bean cake for both biomass materials. The present study indicated that compelmentary performances of the torrefaction and co-pelletization with castor bean cake provide a promising alternative for fuel production from biomass and oil cake.

  6. User-needs study for the 1993 residential energy consumption survey

    SciTech Connect

    Not Available

    1993-09-24

    During 1992, the Energy Information Administration (EIA) conducted a user-needs study for the 1993 Residential Energy Consumption Survey (RECS). Every 3 years, the RECS collects information on energy consumption and expenditures for various classes of households and residential buildings. The RECS is the only source of such information within EIA, and one of only a few sources of such information anywhere. EIA sent letters to more than 750 persons, received responses from 56, and held 15 meetings with users. Written responses were also solicited by notices published in the April 14, 1992 Federal Register and in several energy-related publications. To ensure that the 1993 RECS meets current information needs, EIA made a specific effort to get input from policy makers and persons needing data for forecasting efforts. These particular needs relate mainly to development of the National Energy Modeling System and new energy legislation being considered at the time of the user needs survey.

  7. Energy consumption in the manufacture of reformulated fuels

    SciTech Connect

    Brown, R.

    1996-03-01

    California`s RFG program, now underway, places new processing demands on the state`s refiners,particularly in sulfur and aromatics reduction in gasoline, diesel and benzene; olefins; vapor pressure and distillation T{sub 50}/T{sub 90} control in gasoline. The study provides a unique look at the energy-use impact of the new rules and gives detailed insight into the process decisions refiners must make.

  8. The influence of biomass energy consumption on CO2 emissions: a wavelet coherence approach.

    PubMed

    Bilgili, Faik; Öztürk, İlhan; Koçak, Emrah; Bulut, Ümit; Pamuk, Yalçın; Muğaloğlu, Erhan; Bağlıtaş, Hayriye H

    2016-10-01

    In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables' efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO2 emissions in the long run cycles after the year 2005 in the USA.

  9. The influence of biomass energy consumption on CO2 emissions: a wavelet coherence approach.

    PubMed

    Bilgili, Faik; Öztürk, İlhan; Koçak, Emrah; Bulut, Ümit; Pamuk, Yalçın; Muğaloğlu, Erhan; Bağlıtaş, Hayriye H

    2016-10-01

    In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables' efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO2 emissions in the long run cycles after the year 2005 in the USA. PMID:27335019

  10. Development of an energy consumption and cost data base for fuel cell total energy systems and conventional building energy systems

    NASA Astrophysics Data System (ADS)

    Pine, G. D.; Christian, J. E.; Mixon, W. R.; Jackson, W. L.

    1980-07-01

    The procedures and data sources used to develop an energy consumption and system cost data base for use in predicting the market penetration of phosphoric acid fuel cell total energy systems in the nonindustrial building market are described. A computer program was used to simulate the hourly energy requirements of six types of buildings; office buildings; retail stores; hotels and motels; schools; hospitals; and multifamily residences. The simulations were done by using hourly weather tapes for one city in each of the ten Department of Energy administrative regions. Two types of building construction were considered, one for existing buildings and one for new buildings. A fuel cell system combined with electrically driven heat pumps and one combined with a gas boiler and an electrically driven chiller were compared with similar conventional systems. The methods of system simulation, component sizing, and system cost estimation are described for each system.

  11. Application of the advanced engineering environment for optimization energy consumption in designed vehicles

    NASA Astrophysics Data System (ADS)

    Monica, Z.; Sękala, A.; Gwiazda, A.; Banaś, W.

    2016-08-01

    Nowadays a key issue is to reduce the energy consumption of road vehicles. In particular solution one could find different strategies of energy optimization. The most popular but not sophisticated is so called eco-driving. In this strategy emphasized is particular behavior of drivers. In more sophisticated solution behavior of drivers is supported by control system measuring driving parameters and suggesting proper operation of the driver. The other strategy is concerned with application of different engineering solutions that aid optimization the process of energy consumption. Such systems take into consideration different parameters measured in real time and next take proper action according to procedures loaded to the control computer of a vehicle. The third strategy bases on optimization of the designed vehicle taking into account especially main sub-systems of a technical mean. In this approach the optimal level of energy consumption by a vehicle is obtained by synergetic results of individual optimization of particular constructional sub-systems of a vehicle. It is possible to distinguish three main sub-systems: the structural one the drive one and the control one. In the case of the structural sub-system optimization of the energy consumption level is related with the optimization or the weight parameter and optimization the aerodynamic parameter. The result is optimized body of a vehicle. Regarding the drive sub-system the optimization of the energy consumption level is related with the fuel or power consumption using the previously elaborated physical models. Finally the optimization of the control sub-system consists in determining optimal control parameters.

  12. Constraining Energy Consumption of China's Largest IndustrialEnterprises Through the Top-1000 Energy-Consuming EnterpriseProgram

    SciTech Connect

    Price, Lynn; Wang, Xuejun

    2007-06-01

    Between 1980 and 2000, China's energy efficiency policiesresulted in a decoupling of the traditionally linked relationship betweenenergy use and gross domestic product (GDP) growth, realizing a four-foldincrease in GDP with only a doubling of energy use. However, during Chinas transition to a market-based economy in the 1990s, many of thecountry's energy efficiency programs were dismantled and between 2001 and2005 China's energy use increased significantly, growing at about thesame rate as GDP. Continuation of this one-to-one ratio of energyconsumption to GDP given China's stated goal of again quadrupling GDPbetween 2000 and 2020 will lead to significant demand for energy, most ofwhich is coal-based. The resulting local, national, and globalenvironmental impacts could be substantial.In 2005, realizing thesignificance of this situation, the Chinese government announced anambitious goal of reducing energy consumption per unit of GDP by 20percent between 2005 and 2010. One of the key initiatives for realizingthis goal is the Top-1000 Energy-Consuming Enterprises program. Thecomprehensive energy consumption of these 1000 enterprises accounted for33 percent of national and 47 percent of industrial energy usage in 2004.Under the Top-1000 program, 2010 energy consumption targets wereannounced for each enterprise. Activities to be undertaken includebenchmarking, energy audits, development of energy saving action plans,information and training workshops, and annual reporting of energyconsumption. This paper will describe the program in detail, includingthe types of enterprises included and the program activities, and willprovide an analysis of the progress and lessons learned todate.

  13. Correlates of University Students' Soft and Energy Drink Consumption According to Gender and Residency.

    PubMed

    Deliens, Tom; Clarys, Peter; De Bourdeaudhuij, Ilse; Deforche, Benedicte

    2015-08-01

    This study assessed personal and environmental correlates of Belgian university students' soft and energy drink consumption and investigated whether these associations were moderated by gender or residency. Four hundred twenty-five university students completed a self-reported on-line questionnaire assessing socio-demographics, health status, soft and energy drink consumption, as well as personal and environmental factors related to soft and energy drink consumption. Multiple linear regression analyses were conducted. Students believing soft drink intake should be minimized (individual subjective norm), finding it less difficult to avoid soft drinks (perceived behavioral control), being convinced they could avoid soft drinks in different situations (self-efficacy), having family and friends who rarely consume soft drinks (modelling), and having stricter family rules about soft drink intake were less likely to consume soft drinks. Students showing stronger behavioral control, having stricter family rules about energy drink intake, and reporting lower energy drink availability were less likely to consume energy drinks. Gender and residency moderated several associations between psychosocial constructs and consumption. Future research should investigate whether interventions focusing on the above personal and environmental correlates can indeed improve university students' beverage choices. PMID:26258790

  14. Correlates of University Students’ Soft and Energy Drink Consumption According to Gender and Residency

    PubMed Central

    Deliens, Tom; Clarys, Peter; De Bourdeaudhuij, Ilse; Deforche, Benedicte

    2015-01-01

    This study assessed personal and environmental correlates of Belgian university students’ soft and energy drink consumption and investigated whether these associations were moderated by gender or residency. Four hundred twenty-five university students completed a self-reported on-line questionnaire assessing socio-demographics, health status, soft and energy drink consumption, as well as personal and environmental factors related to soft and energy drink consumption. Multiple linear regression analyses were conducted. Students believing soft drink intake should be minimized (individual subjective norm), finding it less difficult to avoid soft drinks (perceived behavioral control), being convinced they could avoid soft drinks in different situations (self-efficacy), having family and friends who rarely consume soft drinks (modelling), and having stricter family rules about soft drink intake were less likely to consume soft drinks. Students showing stronger behavioral control, having stricter family rules about energy drink intake, and reporting lower energy drink availability were less likely to consume energy drinks. Gender and residency moderated several associations between psychosocial constructs and consumption. Future research should investigate whether interventions focusing on the above personal and environmental correlates can indeed improve university students’ beverage choices. PMID:26258790

  15. 10 CFR 431.324 - Uniform test method for the measurement of energy efficiency and standby mode energy consumption...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Test Procedures § 431.324 Uniform test method for the... fixtures at this time. The above statement will be removed as part of the rulemaking to amend the energy conservation standards for metal halide lamp fixtures to account for standby mode energy consumption, and...

  16. 10 CFR 431.324 - Uniform test method for the measurement of energy efficiency and standby mode energy consumption...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Test Procedures § 431.324 Uniform test method for the... fixtures at this time. The above statement will be removed as part of the rulemaking to amend the energy conservation standards for metal halide lamp fixtures to account for standby mode energy consumption, and...

  17. Short-Term Energy Outlook Model Documentation: Electricity Generation and Fuel Consumption Models

    EIA Publications

    2014-01-01

    The electricity generation and fuel consumption models of the Short-Term Energy Outlook (STEO) model provide forecasts of electricity generation from various types of energy sources and forecasts of the quantities of fossil fuels consumed for power generation. The structure of the electricity industry and the behavior of power generators varies between different areas of the United States. In order to capture these differences, the STEO electricity supply and fuel consumption models are designed to provide forecasts for the four primary Census regions.

  18. Smart HVAC Control in IoT: Energy Consumption Minimization with User Comfort Constraints

    PubMed Central

    Verikoukis, Christos

    2014-01-01

    Smart grid is one of the main applications of the Internet of Things (IoT) paradigm. Within this context, this paper addresses the efficient energy consumption management of heating, ventilation, and air conditioning (HVAC) systems in smart grids with variable energy price. To that end, first, we propose an energy scheduling method that minimizes the energy consumption cost for a particular time interval, taking into account the energy price and a set of comfort constraints, that is, a range of temperatures according to user's preferences for a given room. Then, we propose an energy scheduler where the user may select to relax the temperature constraints to save more energy. Moreover, thanks to the IoT paradigm, the user may interact remotely with the HVAC control system. In particular, the user may decide remotely the temperature of comfort, while the temperature and energy consumption information is sent through Internet and displayed at the end user's device. The proposed algorithms have been implemented in a real testbed, highlighting the potential gains that can be achieved in terms of both energy and cost. PMID:25054163

  19. Smart HVAC control in IoT: energy consumption minimization with user comfort constraints.

    PubMed

    Serra, Jordi; Pubill, David; Antonopoulos, Angelos; Verikoukis, Christos

    2014-01-01

    Smart grid is one of the main applications of the Internet of Things (IoT) paradigm. Within this context, this paper addresses the efficient energy consumption management of heating, ventilation, and air conditioning (HVAC) systems in smart grids with variable energy price. To that end, first, we propose an energy scheduling method that minimizes the energy consumption cost for a particular time interval, taking into account the energy price and a set of comfort constraints, that is, a range of temperatures according to user's preferences for a given room. Then, we propose an energy scheduler where the user may select to relax the temperature constraints to save more energy. Moreover, thanks to the IoT paradigm, the user may interact remotely with the HVAC control system. In particular, the user may decide remotely the temperature of comfort, while the temperature and energy consumption information is sent through Internet and displayed at the end user's device. The proposed algorithms have been implemented in a real testbed, highlighting the potential gains that can be achieved in terms of both energy and cost. PMID:25054163

  20. Smart HVAC control in IoT: energy consumption minimization with user comfort constraints.

    PubMed

    Serra, Jordi; Pubill, David; Antonopoulos, Angelos; Verikoukis, Christos

    2014-01-01

    Smart grid is one of the main applications of the Internet of Things (IoT) paradigm. Within this context, this paper addresses the efficient energy consumption management of heating, ventilation, and air conditioning (HVAC) systems in smart grids with variable energy price. To that end, first, we propose an energy scheduling method that minimizes the energy consumption cost for a particular time interval, taking into account the energy price and a set of comfort constraints, that is, a range of temperatures according to user's preferences for a given room. Then, we propose an energy scheduler where the user may select to relax the temperature constraints to save more energy. Moreover, thanks to the IoT paradigm, the user may interact remotely with the HVAC control system. In particular, the user may decide remotely the temperature of comfort, while the temperature and energy consumption information is sent through Internet and displayed at the end user's device. The proposed algorithms have been implemented in a real testbed, highlighting the potential gains that can be achieved in terms of both energy and cost.

  1. Modeling Stochastic Energy and Water Consumption to Manage Residential Water Uses

    NASA Astrophysics Data System (ADS)

    Abdallah, A. M.; Rosenberg, D. E.; Water; Energy Conservation

    2011-12-01

    Water energy linkages have received growing attention from the water and energy utilities as utilities recognize that collaborative efforts can implement more effective conservation and efficiency improvement programs at lower cost with less effort. To date, limited energy-water household data has allowed only deterministic analysis for average, representative households and required coarse assumptions - like the water heater (the primary energy use in a home apart from heating and cooling) be a single end use. Here, we use recent available disaggregated hot and cold water household end-use data to estimate water and energy consumption for toilet, shower, faucet, dishwasher, laundry machine, leaks, and other household uses and savings from appliance retrofits. The disaggregated hot water and bulk water end-use data was previously collected by the USEPA for 96 single family households in Seattle WA and Oakland CA, and Tampa FL between the period from 2000 and 2003 for two weeks before and four weeks after each household was retrofitted with water efficient appliances. Using the disaggregated data, we developed a stochastic model that represents factors that influence water use for each appliance: behavioral (use frequency and duration), demographical (household size), and technological (use volume or flowrate). We also include stochastic factors that govern energy to heat hot water: hot water fraction (percentage of hot water volume to total water volume used in a certain end-use event), heater water intake and dispense temperatures, and energy source for the heater (gas, electric, etc). From the empirical household end-use data, we derive stochastic probability distributions for each water and energy factor where each distribution represents the range and likelihood of values that the factor may take. The uncertainty of the stochastic water and energy factors is propagated using Monte Carlo simulations to calculate the composite probability distribution for water

  2. [General practitioners' commitment to treating excessive alcohol consumption: A question of role security in treating affected patients?].

    PubMed

    Fankhänel, Thomas; Rascher, Anja; Thiel, Carolin; Schulz, Katrin; Klement, Andreas

    2016-01-01

    Only a few general practitioners (GPs) are committed to screen their patients for alcohol consumption and, in case of excessive alcohol consumption conduct by a brief intervention according to WHO recommendations. Apart from inadequate compensation and work load, another barrier identified by the GPs was their uncertainty about how to deal with affected patients. Most German universities presently spend no more than 90minutes lecture time on addiction medicine teaching. Our research aims to investigate the question whether medical studies and advanced medical education increases the role security of medical students and physicians and their commitment to implementing alcohol screening and brief intervention. Moreover, we will explore whether lack of therapeutic commitment can be related to lack of role security. Questionnaires were administered to pre-clinical and clinical medical students as well as senior house officers. Role security and therapeutic commitment of students and senior house officers were assessed using the Alcohol and Alcohol Problems Questionnaire (SAAPPQ) subscales "Role Security" and "Therapeutic Commitment". Analysis was based on 367 questionnaires. As expected, senior house officers reported more Role Security than clinical medical students who showed a higher level of Role Security than pre-clinical medical students. No differences could be found for Therapeutic Commitment. An association between Role Security and Therapeutic Commitment was only revealed for clinical medical students. Medical studies and advanced medical education can increase students' and senior house officers' Role Security to treat patients with excessive alcohol consumption, but not Therapeutic Commitment. Moreover, no association between Role Security and Therapeutic Commitment could be found for senior house officers. Hence, it may be assumed that educational activities aiming to increase Role Security do not promote the development of motivational aspects such as

  3. [General practitioners' commitment to treating excessive alcohol consumption: A question of role security in treating affected patients?].

    PubMed

    Fankhänel, Thomas; Rascher, Anja; Thiel, Carolin; Schulz, Katrin; Klement, Andreas

    2016-01-01

    Only a few general practitioners (GPs) are committed to screen their patients for alcohol consumption and, in case of excessive alcohol consumption conduct by a brief intervention according to WHO recommendations. Apart from inadequate compensation and work load, another barrier identified by the GPs was their uncertainty about how to deal with affected patients. Most German universities presently spend no more than 90minutes lecture time on addiction medicine teaching. Our research aims to investigate the question whether medical studies and advanced medical education increases the role security of medical students and physicians and their commitment to implementing alcohol screening and brief intervention. Moreover, we will explore whether lack of therapeutic commitment can be related to lack of role security. Questionnaires were administered to pre-clinical and clinical medical students as well as senior house officers. Role security and therapeutic commitment of students and senior house officers were assessed using the Alcohol and Alcohol Problems Questionnaire (SAAPPQ) subscales "Role Security" and "Therapeutic Commitment". Analysis was based on 367 questionnaires. As expected, senior house officers reported more Role Security than clinical medical students who showed a higher level of Role Security than pre-clinical medical students. No differences could be found for Therapeutic Commitment. An association between Role Security and Therapeutic Commitment was only revealed for clinical medical students. Medical studies and advanced medical education can increase students' and senior house officers' Role Security to treat patients with excessive alcohol consumption, but not Therapeutic Commitment. Moreover, no association between Role Security and Therapeutic Commitment could be found for senior house officers. Hence, it may be assumed that educational activities aiming to increase Role Security do not promote the development of motivational aspects such as

  4. A thirst for power: A global analysis of water consumption for energy production

    NASA Astrophysics Data System (ADS)

    Spang, Edward

    Producing energy resources requires significant quantities of freshwater. As an energy sector changes or expands, the mix of technologies deployed to produce fuels and electricity determines the associated burden on regional water resources. A number of reports exist that specify water consumption by discrete energy production technologies. This research synthesizes and expands this previous work by examining the global distribution of water consumption intensity of national-level energy portfolios. By defining and calculating indicators to quantify the relative water use intensity of national energy systems, it was possible to highlight potentially problematic areas of high water use intensity while also providing examples of water-efficient energy production. The results of the research show a high variability in the national water consumption of energy production (WCEP) for the 158 countries that were assessed. However, looking across the indicators for WCEP internationally, the countries that were heavily producing fossil fuel or biofuels demonstrated the greatest intensity of energy-based water consumption. The economic imperative to develop fossil fuels drives high water consumption in countries that already lack sufficient water supplies. Meanwhile, biofuels require so much water over their lifecycle per unit of produced energy that any modest commitment to producing biofuels has significant water consumption ramifications for the country. While these results are based on a comprehensive review of available data, future research in this area could be significantly enhanced through better data and widespread adoption of consistent reporting mechanisms. Additional opportunities to expand the field include increasing the resolution of the study regions, tracking these indicators over time, and exploring innovative policy approaches to managing national WCEP effectively. For nations facing the greatest limitations in the availability of local water and energy

  5. Formal Model for the Reduction of the Dynamic Energy Consumption in Multi-Layer Memory Subsystems

    NASA Astrophysics Data System (ADS)

    Zhu, Hongwei; Luican, Ilie I.; Balasa, Florin; Pradhan, Dhiraj K.

    In real-time data-dominated communication and multimedia processing applications, a multi-layer memory hierarchy is typically used to enhance the system performance and also to reduce the energy consumption. Savings of dynamic energy can be obtained by accessing frequently used data from smaller on-chip memories rather than from large background memories. This paper focuses on the reduction of the dynamic energy consumption in the memory subsystem of multidimensional signal processing systems, starting from the high-level algorithmic specification of the application. The paper presents a formal model which identifies those parts of arrays more intensely accessed, taking also into account the relative lifetimes of the signals. Tested on a two-layer memory hierarchy, this model led to savings of dynamic energy from 40% to over 70% relative to the energy used in the case of flat memory designs.

  6. Sociodemographic Correlates of Energy Drink Consumption With and Without Alcohol: Results of a Community Survey

    PubMed Central

    Berger, Lisa K.; Fendrich, Michael; Chen, Han-Yang; Arria, Amelia M.; Cisler, Ron A.

    2010-01-01

    Objective We examined the sociodemographic correlates of energy drink use and the differences between those who use them with and without alcohol in a representative community sample. Methods A random-digit-dial landline telephone survey of adults in the Milwaukee, Wisconsin area responded to questions about energy drink and alcohol plus energy drink use. Results Almost one-third of respondents consumed at least one energy drink in their lifetime, while slightly over 25% used energy drinks in the past year and 6% were past-year alcohol plus energy drink users. There were important racial/ethnic differences in consumption patterns. Compared to non-users, past-year energy drink users were more likely to be non-Black minorities; and past-year alcohol plus energy drink users when compared to energy drink users only were more likely to be White and younger. Alcohol plus energy drink users also were more likely to be hazardous drinkers. Conclusions Our results which are among the first from a community sample suggest a bifurcated pattern of energy drink use highlighting important population consumption differences between users of energy drinks only and those who use alcohol and energy drinks together. PMID:21276661

  7. The Gastropod Menace: Slugs on Brassica Plants Affect Caterpillar Survival through Consumption and Interference with Parasitoid Attraction.

    PubMed

    Desurmont, Gaylord A; Zemanova, Miriam A; Turlings, Ted C J

    2016-03-01

    Terrestrial molluscs and insect herbivores play a major role as plant consumers in a number of ecosystems, but their direct and indirect interactions have hardly been explored. The omnivorous nature of slugs makes them potential disrupters of predator-prey relationships, as a direct threat to small insects and through indirect, plant-mediated effects. Here, we examined the effects of the presence of two species of slugs, Arion rufus (native) and A. vulgaris (invasive) on the survivorship of young Pieris brassicae caterpillars when feeding on Brassica rapa plants, and on plant attractiveness to the main natural enemy of P. brassicae, the parasitoid Cotesia glomerata. In two separate predation experiments, caterpillar mortality was significantly higher on plants co-infested with A. rufus or A. vulgaris. Moreover, caterpillar mortality correlated positively with slug mass and leaf consumption by A. vulgaris. At the third trophic level, plants infested with slugs and plants co-infested with slugs and caterpillars were far less attractive to parasitoids than plants damaged by caterpillars only, independently of slug species. Chemical analyses confirmed that volatile emissions, which provide foraging cues for parasitoids, were strongly reduced in co-infested plants. Our study shows that the presence of slugs has the potential to affect insect populations, directly via consumptive effects, and indirectly via changes in plant volatiles that result in a reduced attraction of natural enemies. The fitness cost for P. brassicae imposed by increased mortality in presence of slugs may be counterbalanced by the benefit of escaping its parasitoids.

  8. The Gastropod Menace: Slugs on Brassica Plants Affect Caterpillar Survival through Consumption and Interference with Parasitoid Attraction.

    PubMed

    Desurmont, Gaylord A; Zemanova, Miriam A; Turlings, Ted C J

    2016-03-01

    Terrestrial molluscs and insect herbivores play a major role as plant consumers in a number of ecosystems, but their direct and indirect interactions have hardly been explored. The omnivorous nature of slugs makes them potential disrupters of predator-prey relationships, as a direct threat to small insects and through indirect, plant-mediated effects. Here, we examined the effects of the presence of two species of slugs, Arion rufus (native) and A. vulgaris (invasive) on the survivorship of young Pieris brassicae caterpillars when feeding on Brassica rapa plants, and on plant attractiveness to the main natural enemy of P. brassicae, the parasitoid Cotesia glomerata. In two separate predation experiments, caterpillar mortality was significantly higher on plants co-infested with A. rufus or A. vulgaris. Moreover, caterpillar mortality correlated positively with slug mass and leaf consumption by A. vulgaris. At the third trophic level, plants infested with slugs and plants co-infested with slugs and caterpillars were far less attractive to parasitoids than plants damaged by caterpillars only, independently of slug species. Chemical analyses confirmed that volatile emissions, which provide foraging cues for parasitoids, were strongly reduced in co-infested plants. Our study shows that the presence of slugs has the potential to affect insect populations, directly via consumptive effects, and indirectly via changes in plant volatiles that result in a reduced attraction of natural enemies. The fitness cost for P. brassicae imposed by increased mortality in presence of slugs may be counterbalanced by the benefit of escaping its parasitoids. PMID:27002323

  9. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... employed, in Btu/h. 4.3Average annual auxiliary electrical energy consumption for pool heaters. The average annual auxiliary electrical energy consumption for pool heaters, EAE, is expressed in Btu and defined as... (converted to equivalent unit of Btu), including the electrical energy to the recirculating pump if...

  10. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... employed, in Btu/h. 4.3Average annual auxiliary electrical energy consumption for pool heaters. The average annual auxiliary electrical energy consumption for pool heaters, EAE, is expressed in Btu and defined as... (converted to equivalent unit of Btu), including the electrical energy to the recirculating pump if...

  11. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... shall be in Btu. 4.2Average annual fossil fuel energy for pool heaters. The average annual fuel energy... reference; see § 430.3) and the fossil fuel energy consumption during the standby test, Qp, in Btu. Ambient... switch, the average electric power consumption during the off mode, PW,OFF = 0, and the fossil...

  12. An analysis of residential energy consumption and expenditures by minority households by home type and housing vintage

    SciTech Connect

    Poyer, D.A.

    1992-01-01

    In this paper a descriptive analysis of the relationship between energy consumption, patterns of energy use, and housing stock variables is presented. The purpose of the analysis is to uncover evidence of variations in energy consumption and expenditures, and patterns of energy use between majority households (defines as households with neither a black nor Hispanic head of household), black households (defined as households with a black head of household), and Hispanic households (defined as households with a Hispanic head of household) between 1980 (time of the first DOE/EIA Residential Energy Consumption Survey, 1982a) and 1987 (time of the last DOE/EIA Residential Energy Consumption Survey, 1989a). The analysis is three-dimensional: energy consumption and expenditures are presented by time (1980 to 1987), housing vintage, and housing type. A comparative analysis of changes in energy variables for the three population groups -- majority, black, and Hispanic -- within and between specific housing stock categories is presented.

  13. An analysis of residential energy consumption and expenditures by minority households by home type and housing vintage

    SciTech Connect

    Poyer, D.A.

    1992-06-01

    In this paper a descriptive analysis of the relationship between energy consumption, patterns of energy use, and housing stock variables is presented. The purpose of the analysis is to uncover evidence of variations in energy consumption and expenditures, and patterns of energy use between majority households (defines as households with neither a black nor Hispanic head of household), black households (defined as households with a black head of household), and Hispanic households (defined as households with a Hispanic head of household) between 1980 (time of the first DOE/EIA Residential Energy Consumption Survey, 1982a) and 1987 (time of the last DOE/EIA Residential Energy Consumption Survey, 1989a). The analysis is three-dimensional: energy consumption and expenditures are presented by time (1980 to 1987), housing vintage, and housing type. A comparative analysis of changes in energy variables for the three population groups -- majority, black, and Hispanic -- within and between specific housing stock categories is presented.

  14. The potential for reducing urban air temperatures and energy consumption through vegetative cooling

    SciTech Connect

    Kurn, D.M.; Bretz, S.E.; Huang, B.; Akbari, H.

    1994-05-01

    A network of 23 weather stations was used to detect existing oases in Southern California. Four stations, separated from one another by 15--25 miles (24--40 km), were closely examined. Data were strongly affected by the distance of the stations from the Pacific Ocean. This and other city-scale effects made the network inadequate for detection of urban oases. We also conducted traverse measurements of temperature and humidity in the Whittier Narrows Recreation Area in Los Angeles County on September 8--10, 1993. Near-surface air temperatures over vegetated areas were 1--2{degrees}C lower than background air temperatures. We estimate that vegetation may lower urban temperatures by 1{degrees}C, while the establishment of vegetative canopies may lower local temperatures by an additional 2{degrees}C. An increase in vegetation in residential neighborhoods may reduce peak loads in the Los Angeles area by 0.3 GW, and reduce energy consumption by 0.2 BkWh/year, saving $20 million annually. Large additional savings would result from regional cooling.

  15. Analysis of the Consumption of Caffeinated Energy Drinks among Polish Adolescents

    PubMed Central

    Nowak, Dariusz; Jasionowski, Artur

    2015-01-01

    Background: Energy drinks (EDs) are extremely popular among adults and adolescents. Regular intake of EDs may lead to an overdose of caffeine, loss of bone mass, overweight, hypertension and, in older age, osteoporosis and cardiovascular diseases. Some people mix EDs with alcohol, which adversely affects their health. The objective of this study was to analyze the consumption of EDs by adolescents. Methods: The study consisted of a questionnaire surveying amounts of drinks, preferences and product awareness among younger consumers. The study was carried out in junior and senior high schools in Poland (n = 2629). Results: EDs were consumed by 67% of students (quite frequently by 16%). Students who practiced sports were more willing to drink EDs. Also, boys drank them more often than girls. When selecting a particular ED, young people looked at the taste, price and effect. Most respondents consumed one ED (250 mL) daily, although there were individuals consuming two or more drinks daily. Most respondents knew the ingredients of EDs, and 24% admitted to mixing EDs with alcohol. Conclusions: EDs are extremely popular among adolescents. Young people drinking EDs every day are potentially at risk of taking an overdose of caffeine. PMID:26184263

  16. Validated Predictions of Metabolic Energy Consumption for Submaximal Effort Movement

    PubMed Central

    Tsianos, George A.; MacFadden, Lisa N.

    2016-01-01

    Physical performance emerges from complex interactions among many physiological systems that are largely driven by the metabolic energy demanded. Quantifying metabolic demand is an essential step for revealing the many mechanisms of physical performance decrement, but accurate predictive models do not exist. The goal of this study was to investigate if a recently developed model of muscle energetics and force could be extended to reproduce the kinematics, kinetics, and metabolic demand of submaximal effort movement. Upright dynamic knee extension against various levels of ergometer load was simulated. Task energetics were estimated by combining the model of muscle contraction with validated models of lower limb musculotendon paths and segment dynamics. A genetic algorithm was used to compute the muscle excitations that reproduced the movement with the lowest energetic cost, which was determined to be an appropriate criterion for this task. Model predictions of oxygen uptake rate (VO2) were well within experimental variability for the range over which the model parameters were confidently known. The model's accurate estimates of metabolic demand make it useful for assessing the likelihood and severity of physical performance decrement for a given task as well as investigating underlying physiologic mechanisms. PMID:27248429

  17. Adaptive contraction of diet breadth affects sexual maturation and specific nutrient consumption in an extreme generalist omnivore.

    PubMed

    Jensen, K; Schal, C; Silverman, J

    2015-04-01

    Animals balance their intake of specific nutrients, but little is known about how they do so when foraging in an environment with toxic resources and whether toxic foods promote adaptations that affect life history traits. In German cockroach (Blattella germanica) populations, glucose aversion has evolved in response to glucose-containing insecticidal baits. We restricted newly eclosed glucose-averse (GA) and wild-type (WT) female cockroaches to nutritionally defined diets varying in protein-to-carbohydrate (P : C) ratio (3 : 1, 1 : 1, or 1 : 3) or gave them free choice of the 3 : 1 and 1 : 3 diets, with either glucose or fructose as the sole carbohydrate source. We measured consumption of each diet over 6 days and then dissected the females to measure the length of basal oocytes in their ovaries. Our results showed significantly lower consumption by GA compared to WT cockroaches when restricted to glucose-containing diets, but also lower fructose intake by GA compared to WT cockroaches when restricted to high fructose diets or given choice of fructose-containing diets. Protein intake was regulated tightly regardless of carbohydrate intake, except by GA cockroaches restricted to glucose-containing diets. Oocyte growth was completely suppressed in GA females restricted to glucose-containing diets, but also significantly slower in GA than in WT females restricted to fructose-containing diets. Our findings suggest that GA cockroaches have adapted to reduced diet breadth through endocrine adjustments which reduce requirements for energetic fuels. Our study illustrates how an evolutionary change in the chemosensory system may affect the evolution of other traits that govern animal life histories.

  18. Transportation vehicle energy intensities. A joint DOT/NASA reference paper. [energy consumption of air and ground vehicles

    NASA Technical Reports Server (NTRS)

    Mascy, A. C.; Paullin, R. L.

    1974-01-01

    A compilation of data on the energy consumption of air and ground vehicles is presented. The ratio BTU/ASM, British Thermal Units/Available Seat Mile, is used to express vehicle energy intensiveness, and related to the energy consumed directly in producing seat-mile or ton-mile productivity. Data is presented on passenger and freight vehicles which are in current use or which are about to enter service, and advanced vehicles which may be operational in the 1980's and beyond. For the advanced vehicles, an estimate is given of the date of initial operational service, and the performance characteristics. Other key considerations in interpreting energy intensiveness for a given mode are discussed, such as: load factors, operations, overhead energy consumption, and energy investments in new structure and equipment.

  19. The Effect of Coffee and Quantity of Consumption on Specific Cardiovascular and All-Cause Mortality: Coffee Consumption Does Not Affect Mortality.

    PubMed

    Loomba, Rohit S; Aggarwal, Saurabh; Arora, Rohit R

    2016-01-01

    Previous studies have examined whether or not an association exists between the consumption of caffeinated coffee to all-cause and cardiovascular mortality. This study aimed to delineate this association using population representative data from the National Health and Nutrition Examination Survey III. Patients were included in the study if all the following criteria were met: (1) follow-up mortality data were available, (2) age of at least 45 years, and (3) reported amount of average coffee consumption. A total of 8608 patients were included, with patients stratified into the following groups of average daily coffee consumption: (1) no coffee consumption, (2) less than 1 cup, (3) 1 cup a day, (4) 2-3 cups, (5) 4-5 cups, (6) more than 6 cups a day. Odds ratios, 95% confidence intervals, and P values were calculated for univariate analysis to compare the prevalence of all-cause mortality, ischemia-related mortality, congestive heart failure-related mortality, and stroke-related mortality, using the no coffee consumption group as reference. These were then adjusted for confounding factors for a multivariate analysis. P < 0.05 were considered statistically significant. Univariate analysis demonstrated an association between coffee consumption and mortality, although this became insignificant on multivariate analysis. Coffee consumption, thus, does not seem to impact all-cause mortality or specific cardiovascular mortality. These findings do differ from those of recently published studies. Coffee consumption of any quantity seems to be safe without any increased mortality risk. There may be some protective effects but additional data are needed to further delineate this.

  20. Impact of Energy Policy Act of 2005 Section 206 Rebates on Consumers and Renewable Energy Consumption, With Projections to 2010

    EIA Publications

    2006-01-01

    The Energy Information Administration (EIA), with the agreement of the Department, interpreted section 206(d) as calling for a listing of the types of renewable fuels available today, and a listing of those that will be available in the future based on the incentives provided in section 206(d). This report provides that information, and also provides information concerning renewable energy equipment and renewable energy consumption.

  1. Energy consumption behavior in the commercial sector: An ethnographic analysis of utility bill information and customer comprehension in the workplace

    NASA Astrophysics Data System (ADS)

    Payne, Christopher Todd

    The commercial and industrial sectors of the United States compose roughly one-third of total United States energy consumption. Many studies have suggested that significant cost-effective energy savings opportunities exist in this sector, but there is a gap between predictions of potential and actual investment in energy-efficient technologies. Very few studies have been conducted to examine the decision-making environment of the business sector. In particular, there is essentially no information about how small-business decision-makers make choices about energy consumption. My research is intended to begin the process of understanding this important arena of energy consumption behavior. Using semi-structured interview techniques, I interviewed forty-four businesses in ten states. The focus of the interviews was the business decision-maker's handling and use of the utility bill---the main (often sole) piece of information that links energy consumption to cost. Through the interviews, I collected information about how utility bills are understood and misunderstood, what components of the bill are seen as useful or confusing, and how energy consumption was seen in the context of larger business decision-making. In addition, I collected data on two forms of energy consumption feedback: historic consumption feedback, in which informants compared their current energy use to patterns of their own energy consumption over time; and group comparison consumption feedback, in which informants compared their energy consumption to the consumption of a group of similar energy consumers. Finally, I collected data on sources of information to which decision-makers turned when they wanted to seek more information about energy consumption alternatives. Overall, my findings suggest that the current utility bill format is often misunderstood. In many cases, particularly in the small-business and medium-size-business categories, the link between energy consumption and energy cost is

  2. The Consumption of Energy Drinks Among a Sample of College Students and College Student Athletes.

    PubMed

    Gallucci, Andrew R; Martin, Ryan J; Morgan, Grant B

    2016-02-01

    To assess energy drink (ED) consumption, potential ED correlates, and ED-related motivations among a sample of college students to determine differences based on athlete status (student athlete vs. non-athlete). Six hundred and ninety-two college students completed surveys at a large private university in the United States. Participants completed a paper based questionnaire assessing ED and ED-related variables. Over thirty-six percent (197 non-athletes, 58 student athletes) of participants reported ED consumption in the preceding 30 days. Multivariately, there was no difference in ED consumption based on athlete status. Heavy episodic drinking and prescription stimulant misuse were both correlated with increased ED consumption. ED motivations differed based on the frequency of ED consumption. ED use was common among student athletes and non-athletes in our sample. It is important to be aware of the correlation between heavy episodic drinking, prescription stimulant misuse, and ED consumption among college student populations because of the adverse consequences associated with these behaviors. PMID:26255272

  3. Estimating the HVAC energy consumption of plug-in electric vehicles

    NASA Astrophysics Data System (ADS)

    Kambly, Kiran R.; Bradley, Thomas H.

    2014-08-01

    Plug in electric vehicles are vehicles that use energy from the electric grid to provide tractive and accessory power to the vehicle. Due to the limited specific energy of energy storage systems, the energy requirements of heating, ventilation, and air conditioning (HVAC) systems for cabin conditioning can significantly reduce their range between charges. Factors such as local ambient temperature, local solar radiation, local humidity, length of the trip and thermal soak have been identified as primary drivers of cabin conditioning loads and therefore of vehicle range. The objective of this paper is to develop a detailed systems-level approach to connect HVAC technologies and usage conditions to consumer-centric metrics of vehicle performance including energy consumption and range. This includes consideration of stochastic and transient inputs to the HVAC energy consumption model including local weather, solar loads, driving behavior, charging behavior, and regional passenger fleet population. The resulting engineering toolset is used to determine the summation of and geographical distribution of energy consumption by HVAC systems in electric vehicles, and to identify regions of US where the distributions of electric vehicle range are particularly sensitive to climate.

  4. Perceived Stress, Energy Drink Consumption, and Academic Performance among College Students

    ERIC Educational Resources Information Center

    Pettit, Michele L.; DeBarr, Kathy A.

    2011-01-01

    Objective: This study explored relationships regarding perceived stress, energy drink consumption, and academic performance among college students. Participants: Participants included 136 undergraduates attending a large southern plains university. Methods: Participants completed surveys including items from the Perceived Stress Scale and items to…

  5. 75 FR 66008 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-27

    ... Federal Register on October 15, 2010 (75 FR 63404), announcing a public meeting and seeking comments... received, please refer to the October 15, 2010, notice (75 FR 63404). Issued in Washington, DC, on October... Parts 433 and 435 RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption Reduction for New...

  6. Diel dualism in the energy consumption of the European catfish Silurus glanis.

    PubMed

    Slavík, O; Horký, P

    2012-12-01

    Twenty individuals of the largest European freshwater predator, the European catfish Silurus glanis, were tagged with electromyogram (EMG) physiological telemetry sensors. The fish were observed during diel cycles during the spring and summer in the Elbe and Berounka Rivers, Czech Republic. The purpose of this study was to determine whether diel dualism in the activity of S. glanis occurs naturally or is induced by the laboratory environment and by the conditions occurring in aquaculture. The results obtained from the riverine environment tended to show dualism in the use of the light and dark phases of the day because 35% of the individuals varied from a site-specific common diel activity pattern. The EMG values increased in accordance with the mass (M) of the fish. To eliminate the influence of M on individual energy consumption, the EMG records were analysed in terms of the EMG:M ratios. High individual variability was found in these ratios. The diel activity pattern of the individuals with relatively high energy consumption differed from the common diel activity pattern. In contrast, the fish that adopted the common diel activity pattern displayed relatively low energy consumption. The results of this study indicated that dualism and energy consumption are related. The EMG values also varied with the values of the environmental variables. Increasing temperature was associated with high EMG values, whereas the EMG values decreased with increasing flow.

  7. Renewable energy rebound effect?: Estimating the impact of state renewable energy financial incentives on residential electricity consumption

    NASA Astrophysics Data System (ADS)

    Stephenson, Beth A.

    Climate change is a well-documented phenomenon. If left unchecked greenhouse gas emissions will continue global surface warming, likely leading to severe and irreversible impacts. Generating renewable energy has become an increasingly salient topic in energy policy as it may mitigate the impact of climate change. State renewable energy financial incentives have been in place since the mid-1970s in some states and over 40 states have adopted one or more incentives at some point since then. Using multivariate linear and fixed effects regression for the years 2002 through 2012, I estimate the relationship between state renewable energy financial incentives and residential electricity consumption, along with the associated policy implications. My hypothesis is that a renewable energy rebound effect is present; therefore, states with renewable energy financial incentives have a higher rate of residential electricity consumption. I find a renewable energy rebound effect is present in varying degrees for each model, but the results do not definitively indicate how particular incentives influence consumer behavior. States should use caution when adopting and keeping renewable energy financial incentives as this may increase consumption in the short-term. The long-term impact is unclear, making it worthwhile for policymakers to continue studying the potential for renewable energy financial incentives to alter consumer behavior.

  8. Energy Consumption Analysis Procedure for Robotic Applications in different task motion

    NASA Astrophysics Data System (ADS)

    Ahmed, Iman; Aris, Ishak b.; Hamiruce Marhaban, Mohammad; Juraiza Ishak, Asnor

    2015-11-01

    This work proposes energy analysis method for humanoid robot, seen from simple motion task to complex one in energy chain. The research developed a procedure suitable for analysis, saving and modelling of energy consumption not only in this type of robot but also in most robots that based on electrical power as an energy source. This method has validated by an accurate integration using Matlab software for the power consumption curve to calculate the energy of individual and multiple servo motors. Therefore, this study can be considered as a procedure for energy analysis by utilizing the laboratory instruments capabilities to measure the energy parameters. We performed a various task motions with different angular speed to find out the speed limits in terms of robot stability and control strategy. A battery capacity investigation have been searched for several types of batteries to extract the power modelling equation and energy density parameter for each battery type, Matlab software have been built to design the algorithm and to evaluate experimental amount of the energy which is represented by area under the curve of the power curves. This will provide a robust estimation for the required energy in different task motions to be considered in energy saving (i.e., motion planning and real time scheduling).

  9. Anticipation Driving Behavior and Related Reduction of Energy Consumption in Traffic Flow

    NASA Astrophysics Data System (ADS)

    Shi, Wei; Wei, Yan-Fang; Song, Tao; Dai, Shi-Qiang; Dong, Li-Yun

    In view that drivers would pay attention to the variation of headway on roads, an extended optimal velocity model is proposed by considering anticipation driving behavior. A stability criterion is given through linear stability analysis of traffic flows. The mKdV equation is derived with the reductive perturbation method for headway evolution which could be used to describe the stop-and-go traffic phenomenon. The results show a good effect of anticipation driving behavior on the stabilization of car flows and the anticipation driving behavior can improve the numerical stability of the model as well. In addition, the fluctuation of kinetic energy and the consumption of average energy in congested traffic flows are systematically analyzed. The results show that the reasonable level of anticipation driving behavior can save energy consumption in deceleration process effectively and lead to an associated relation like a "bow-tie" between the energy-saving and the value of anticipation factor.

  10. Something to buy paraffin with: an investigation into domestic energy consumption in rural Kenya

    SciTech Connect

    Hosier, R.H.

    1982-01-01

    Recently, two government agencies have surveyed energy consumption in Kenya. These two studies yielded conflicting results, necessitating that a third, more carefully conducted survey be used as the basis for this study. The survey instrument used was designed by the author and included questions regarding the types and quantities of fuels used, income information, and demographic data; 572 households were surveyed. The results are first aggregated by ecological zone and compared with the responses of the same households from the 1979 energy survey. Two findings emerge. First, wood consumption is lower in the high and medium potential lands. Fuelwood scarcity appears to be caused by high population density, not low ecological potential. Second, consumption of fuelwood and paraffin (i.e., kerosene) has decreased significantly over the past two years, due mainly to the increased price of the latter and the increased scarcity of the former. Next, the survey results are analyzed by way of a farm-type classification system which classifies the respondents into five groups: non-surplus farmers, surplus farmers, cash-surplus farmers, cash crop farmers, and wage workers. Finally, the analysis takes a relational perspective relying upon regression analysis. Income serves as a determinant of kerosene consumption, but not of fuelwood consumption.

  11. Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

    SciTech Connect

    Belzer, D. B.; Hadley, S. W.; Chin, S-M.

    2008-10-01

    The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings

  12. Legal and regulatory issues affecting aquifer thermal energy storage

    SciTech Connect

    Hendrickson, P.L.

    1981-10-01

    This document updates and expands the report with a similar title issued in October 1980. This document examines a number of legal and regulatory issues that potentially can affect implementation of the aquifer thermal energy storage (ATES) concept. This concept involves the storage of thermal energy in an underground aquifer until a later date when it can be effectively utilized. Either heat energy or chill can be stored. Potential end uses of the energy include district space heating and cooling, industrial process applications, and use in agriculture or aquaculture. Issues are examined in four categories: regulatory requirements, property rights, potential liability, and issues related to heat or chill delivery.

  13. Reduction potentials of total energy consumption and GHG emissions in Xiamen

    NASA Astrophysics Data System (ADS)

    Bin, C.; Cui, S.

    2009-12-01

    Urban areas contain 40% of the population and contribute 75% of the Chinese national economy. The 35 largest cities in China, which contain 18% of the population, contribute 40% of China’s energy uses and CO2 emissions. Therefore, an insight into energy consumption and quantification of emissions from urban areas are extremely important for identifying effects of energy-saving policies and finding solution to GHG emissions in urban centers. This paper applies the Long-range Energy Alternatives Planning (LEAP) system for modeling the total energy consumption and associated emissions from Xiamen city. Energy consumption under different sets of policy and technology options are analyzed for a time span of 2007-2020 and GHG emissions are estimated. Two scenarios have been designed to describe the future strategies relating to the development of Xiamen city. The ‘Business as Usual’ scenario is used as a baseline reference scenario, in which the government is assumed to do nothing to influence the long-term trends of urban energy demand. The ‘Integrated’ scenario is considered to be the most optimized case where a series of available reduction measures such as clean energy substitution, industrial energy conservation, combined heat and power generation, energy conservation in building, motor vehicle control and new and renewable energy development and utilization are assumed to be implemented. Energy demand and GHG emissions in Xiamen up to 2020 are estimated in these two scenarios. The total reduction potentials in the ‘Integrated’ scenario and the relative contribution rate of reduction potentials of each measure have been estimated.

  14. Energy consumption analysis for various memristive networks under different learning strategies

    NASA Astrophysics Data System (ADS)

    Deng, Lei; Wang, Dong; Zhang, Ziyang; Tang, Pei; Li, Guoqi; Pei, Jing

    2016-02-01

    Recently, various memristive systems emerge to emulate the efficient computing paradigm of the brain cortex; whereas, how to make them energy efficient still remains unclear, especially from an overall perspective. Here, a systematical and bottom-up energy consumption analysis is demonstrated, including the memristor device level and the network learning level. We propose an energy estimating methodology when modulating the memristive synapses, which is simulated in three typical neural networks with different synaptic structures and learning strategies for both offline and online learning. These results provide an in-depth insight to create energy efficient brain-inspired neuromorphic devices in the future.

  15. Thermostats with attitudes: A sociological analysis of assumptions underlying common approaches to reducing residential energy consumption

    NASA Astrophysics Data System (ADS)

    Nevius, Monica Josefina

    2001-12-01

    This dissertation contributes to the emerging literature in the sociology of energy consumption by answering three important questions about the assumptions underlying popular approaches to reducing energy consumption behavior. The answers are gleaned from data on Wisconsin households gathered in 1998 and 1999. The first question has to do with the efficacy of a "cognitive fix" approach of attempting to change attitudes in hopes of changing behavior, and asks whether energy-related attitudes can predict actual energy savings. The results of a regression analysis of heating energy intensity revealed that a variable measuring respondents' attitudes toward energy conservation predict heating energy intensity, but the effect was overwhelmed by control variables for insulation and draftiness. These and other results offer some support for the cognitive fix approach of attitudinal change as a means of reducing energy consumption. The second question concerns a popular "technological fix" of subsidizing the replacement of manual thermostats with programmable ones, and asks whether programmable thermostats actually save significant home heating energy. The data show that households with programmable thermostats appear to use no less energy than do households with manual thermostats, and that it is behavioral norms, not the type of thermostat, that determine thermostat setting behavior. The results suggest strongly that in aggregate, the installation of programmable thermostats in residential households cannot be expected to deliver promised energy savings. The third question addressed is whether popular knowledge about global warming or the connection between energy use and global environmental change is growing, and if so, what is the likelihood that these prospective socio-cultural shifts might result in increased residential energy conservation. The analysis suggests that, compared to the findings of earlier studies, awareness of the environmental consequences of energy

  16. How effective is group feedback in encouraging occupants of an office building to reduce energy consumption?

    NASA Astrophysics Data System (ADS)

    Shah, Ushik D.

    Lighting contributes to a high percentage of the total energy use in office buildings. The lack of financial incentive often dissuades office workers from trying to save electricity at their work place. This thesis aims at reducing the total power consumed by an office building by using persuasive technologies on the occupants to promote environmentally conscious and energy saving behavior. A three week field study was conducted by providing occupants of an office building feedback about their energy consumption along with messages to encourage them to save energy. Feedback was provided via television screens and flyers placed strategically at the study location, the fourth floor of the Knoy Hall of Technology, Purdue University, West Lafayette campus. The results obtained from the analysis of data showed no change in energy consumption post intervention. Group feedback thus proved to be ineffective in encouraging occupants of this office building to reduce their energy consumption. This thesis presents the findings of the study and discusses recommendations and future scope for similar studies.

  17. Woody biomass pretreatment for cellulosic ethanol production: Technology and energy consumption evaluation.

    PubMed

    Zhu, J Y; Pan, X J

    2010-07-01

    This review presents a comprehensive discussion of the key technical issues in woody biomass pretreatment: barriers to efficient cellulose saccharification, pretreatment energy consumption, in particular energy consumed for wood-size reduction, and criteria to evaluate the performance of a pretreatment. A post-chemical pretreatment size-reduction approach is proposed to significantly reduce mechanical energy consumption. Because the ultimate goal of biofuel production is net energy output, a concept of pretreatment energy efficiency (kg/MJ) based on the total sugar recovery (kg/kg wood) divided by the energy consumption in pretreatment (MJ/kg wood) is defined. It is then used to evaluate the performances of three of the most promising pretreatment technologies: steam explosion, organosolv, and sulfite pretreatment to overcome lignocelluloses recalcitrance (SPORL) for softwood pretreatment. The present study found that SPORL is the most efficient process and produced highest sugar yield. Other important issues, such as the effects of lignin on substrate saccharification and the effects of pretreatment on high-value lignin utilization in woody biomass pretreatment, are also discussed.

  18. 10 CFR Appendix X1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers X1 Appendix X1 to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App....

  19. 10 CFR 431.64 - Uniform test method for the measurement of energy consumption of commercial refrigerators...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Uniform test method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator-freezers. 431.64 Section 431.64 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND...

  20. 10 CFR Appendix N to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Furnaces and Boilers

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption of Furnaces and Boilers N Appendix N to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App....

  1. 10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption of Pool Heaters P Appendix P to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. P Appendix P...

  2. 10 CFR 431.224 - Uniform test method for the measurement of energy consumption for traffic signal modules and...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Uniform test method for the measurement of energy consumption for traffic signal modules and pedestrian modules. 431.224 Section 431.224 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL...

  3. 10 CFR 431.224 - Uniform test method for the measurement of energy consumption for traffic signal modules and...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Uniform test method for the measurement of energy consumption for traffic signal modules and pedestrian modules. 431.224 Section 431.224 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL...

  4. 10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Test Procedures §...

  5. Low-dose aspartame consumption differentially affects gut microbiota-host metabolic interactions in the diet-induced obese rat.

    PubMed

    Palmnäs, Marie S A; Cowan, Theresa E; Bomhof, Marc R; Su, Juliet; Reimer, Raylene A; Vogel, Hans J; Hittel, Dustin S; Shearer, Jane

    2014-01-01

    Aspartame consumption is implicated in the development of obesity and metabolic disease despite the intention of limiting caloric intake. The mechanisms responsible for this association remain unclear, but may involve circulating metabolites and the gut microbiota. Aims were to examine the impact of chronic low-dose aspartame consumption on anthropometric, metabolic and microbial parameters in a diet-induced obese model. Male Sprague-Dawley rats were randomized into a standard chow diet (CH, 12% kcal fat) or high fat (HF, 60% kcal fat) and further into ad libitum water control (W) or low-dose aspartame (A, 5-7 mg/kg/d in drinking water) treatments for 8 week (n = 10-12 animals/treatment). Animals on aspartame consumed fewer calories, gained less weight and had a more favorable body composition when challenged with HF compared to animals consuming water. Despite this, aspartame elevated fasting glucose levels and an insulin tolerance test showed aspartame to impair insulin-stimulated glucose disposal in both CH and HF, independently of body composition. Fecal analysis of gut bacterial composition showed aspartame to increase total bacteria, the abundance of Enterobacteriaceae and Clostridium leptum. An interaction between HF and aspartame was also observed for Roseburia ssp wherein HF-A was higher than HF-W (P<0.05). Within HF, aspartame attenuated the typical HF-induced increase in the Firmicutes:Bacteroidetes ratio. Serum metabolomics analysis revealed aspartame to be rapidly metabolized and to be associated with elevations in the short chain fatty acid propionate, a bacterial end product and highly gluconeogenic substrate, potentially explaining its negative affects on insulin tolerance. How aspartame influences gut microbial composition and the implications of these changes on the development of metabolic disease require further investigation. PMID:25313461

  6. Low-Dose Aspartame Consumption Differentially Affects Gut Microbiota-Host Metabolic Interactions in the Diet-Induced Obese Rat

    PubMed Central

    Palmnäs, Marie S. A.; Cowan, Theresa E.; Bomhof, Marc R.; Su, Juliet; Reimer, Raylene A.; Vogel, Hans J.; Hittel, Dustin S.; Shearer, Jane

    2014-01-01

    Aspartame consumption is implicated in the development of obesity and metabolic disease despite the intention of limiting caloric intake. The mechanisms responsible for this association remain unclear, but may involve circulating metabolites and the gut microbiota. Aims were to examine the impact of chronic low-dose aspartame consumption on anthropometric, metabolic and microbial parameters in a diet-induced obese model. Male Sprague-Dawley rats were randomized into a standard chow diet (CH, 12% kcal fat) or high fat (HF, 60% kcal fat) and further into ad libitum water control (W) or low-dose aspartame (A, 5–7 mg/kg/d in drinking water) treatments for 8 week (n = 10–12 animals/treatment). Animals on aspartame consumed fewer calories, gained less weight and had a more favorable body composition when challenged with HF compared to animals consuming water. Despite this, aspartame elevated fasting glucose levels and an insulin tolerance test showed aspartame to impair insulin-stimulated glucose disposal in both CH and HF, independently of body composition. Fecal analysis of gut bacterial composition showed aspartame to increase total bacteria, the abundance of Enterobacteriaceae and Clostridium leptum. An interaction between HF and aspartame was also observed for Roseburia ssp wherein HF-A was higher than HF-W (P<0.05). Within HF, aspartame attenuated the typical HF-induced increase in the Firmicutes:Bacteroidetes ratio. Serum metabolomics analysis revealed aspartame to be rapidly metabolized and to be associated with elevations in the short chain fatty acid propionate, a bacterial end product and highly gluconeogenic substrate, potentially explaining its negative affects on insulin tolerance. How aspartame influences gut microbial composition and the implications of these changes on the development of metabolic disease require further investigation. PMID:25313461

  7. Low-dose aspartame consumption differentially affects gut microbiota-host metabolic interactions in the diet-induced obese rat.

    PubMed

    Palmnäs, Marie S A; Cowan, Theresa E; Bomhof, Marc R; Su, Juliet; Reimer, Raylene A; Vogel, Hans J; Hittel, Dustin S; Shearer, Jane

    2014-01-01

    Aspartame consumption is implicated in the development of obesity and metabolic disease despite the intention of limiting caloric intake. The mechanisms responsible for this association remain unclear, but may involve circulating metabolites and the gut microbiota. Aims were to examine the impact of chronic low-dose aspartame consumption on anthropometric, metabolic and microbial parameters in a diet-induced obese model. Male Sprague-Dawley rats were randomized into a standard chow diet (CH, 12% kcal fat) or high fat (HF, 60% kcal fat) and further into ad libitum water control (W) or low-dose aspartame (A, 5-7 mg/kg/d in drinking water) treatments for 8 week (n = 10-12 animals/treatment). Animals on aspartame consumed fewer calories, gained less weight and had a more favorable body composition when challenged with HF compared to animals consuming water. Despite this, aspartame elevated fasting glucose levels and an insulin tolerance test showed aspartame to impair insulin-stimulated glucose disposal in both CH and HF, independently of body composition. Fecal analysis of gut bacterial composition showed aspartame to increase total bacteria, the abundance of Enterobacteriaceae and Clostridium leptum. An interaction between HF and aspartame was also observed for Roseburia ssp wherein HF-A was higher than HF-W (P<0.05). Within HF, aspartame attenuated the typical HF-induced increase in the Firmicutes:Bacteroidetes ratio. Serum metabolomics analysis revealed aspartame to be rapidly metabolized and to be associated with elevations in the short chain fatty acid propionate, a bacterial end product and highly gluconeogenic substrate, potentially explaining its negative affects on insulin tolerance. How aspartame influences gut microbial composition and the implications of these changes on the development of metabolic disease require further investigation.

  8. Estimation of Energy Consumption and Greenhouse Gas Emissions considering Aging and Climate Change in Residential Sector

    NASA Astrophysics Data System (ADS)

    Lee, M.; Park, C.; Park, J. H.; Jung, T. Y.; Lee, D. K.

    2015-12-01

    The impacts of climate change, particularly that of rising temperatures, are being observed across the globe and are expected to further increase. To counter this phenomenon, numerous nations are focusing on the reduction of greenhouse gas (GHG) emissions. Because energy demand management is considered as a key factor in emissions reduction, it is necessary to estimate energy consumption and GHG emissions in relation to climate change. Further, because South Korea is the world's fastest nation to become aged, demographics have also become instrumental in the accurate estimation of energy demands and emissions. Therefore, the purpose of this study is to estimate energy consumption and GHG emissions in the residential sectors of South Korea with regard to climate change and aging to build more accurate strategies for energy demand management and emissions reduction goals. This study, which was stablished with 2010 and 2050 as the base and target years, respectively, was divided into a two-step process. The first step evaluated the effects of aging and climate change on energy demand, and the second estimated future energy use and GHG emissions through projected scenarios. First, aging characteristics and climate change factors were analyzed by using the logarithmic mean divisia index (LMDI) decomposition analysis and the application of historical data. In the analysis of changes in energy use, the effects of activity, structure, and intensity were considered; the degrees of contribution were derived from each effect in addition to their relations to energy demand. Second, two types of scenarios were stablished based on this analysis. The aging scenarios are business as usual and future characteristics scenarios, and were used in combination with Representative Concentration Pathway (RCP) 2.6 and 8.5. Finally, energy consumption and GHG emissions were estimated by using a combination of scenarios. The results of these scenarios show an increase in energy consumption

  9. Eight-day consumption of inulin added to a yogurt breakfast lowers postprandial appetite ratings but not energy intakes in young healthy females: a randomised controlled trial.

    PubMed

    Heap, Sarah; Ingram, Jessica; Law, Marron; Tucker, Amy J; Wright, Amanda J

    2016-01-28

    Increasing feelings of satiety may reduce appetite and energy intake. The role of inulin consumption in impacting satiety is unclear. A randomised double-blind controlled crossover trial aimed to determine the effects of inulin+yogurt on satiety after 1 and 8-d consumption. The preload breakfast included 100 g vanilla yogurt with (yogurt-inulin (YI)) and without (yogurt-control (YC)) 6 g inulin. A total of nineteen healthy females (22·8 (sd 2·7) years) with non-restrained eating behaviour and taking hormonal contraceptives participated in the study. Day 1 and 8 visual analogue scale (VAS) ratings of Hunger, Fullness, Desire to Eat and Prospective Food Consumption (PFC) were collected at fasting and every 30 min for 180 min. Energy intake was calculated from a weighed ad libitum lunch and remainder of day food records. Total AUC was calculated for each VAS. Day 1 (VAS only) and 8 (VAS and energy intakes) data were compared between YI and YC using ANCOVA, and ANOVA was used to compare energy intakes on Day 1. There were no significant differences between Day 1 YI and YC AUC appetite ratings or energy intakes. However, 8-d consumption of YI v. YC was associated with lower Desire to Eat and PFC ratings but similar lunch and total day energy intakes. Therefore, the addition of 6 g inulin to a commercially available yogurt affected feelings of appetite, but not energy intake, after repeated consumption. These results suggest that inulin may be a suitable ingredient to increase dietary fibre consumption, with potential to impact appetite.

  10. Eight-day consumption of inulin added to a yogurt breakfast lowers postprandial appetite ratings but not energy intakes in young healthy females: a randomised controlled trial.

    PubMed

    Heap, Sarah; Ingram, Jessica; Law, Marron; Tucker, Amy J; Wright, Amanda J

    2016-01-28

    Increasing feelings of satiety may reduce appetite and energy intake. The role of inulin consumption in impacting satiety is unclear. A randomised double-blind controlled crossover trial aimed to determine the effects of inulin+yogurt on satiety after 1 and 8-d consumption. The preload breakfast included 100 g vanilla yogurt with (yogurt-inulin (YI)) and without (yogurt-control (YC)) 6 g inulin. A total of nineteen healthy females (22·8 (sd 2·7) years) with non-restrained eating behaviour and taking hormonal contraceptives participated in the study. Day 1 and 8 visual analogue scale (VAS) ratings of Hunger, Fullness, Desire to Eat and Prospective Food Consumption (PFC) were collected at fasting and every 30 min for 180 min. Energy intake was calculated from a weighed ad libitum lunch and remainder of day food records. Total AUC was calculated for each VAS. Day 1 (VAS only) and 8 (VAS and energy intakes) data were compared between YI and YC using ANCOVA, and ANOVA was used to compare energy intakes on Day 1. There were no significant differences between Day 1 YI and YC AUC appetite ratings or energy intakes. However, 8-d consumption of YI v. YC was associated with lower Desire to Eat and PFC ratings but similar lunch and total day energy intakes. Therefore, the addition of 6 g inulin to a commercially available yogurt affected feelings of appetite, but not energy intake, after repeated consumption. These results suggest that inulin may be a suitable ingredient to increase dietary fibre consumption, with potential to impact appetite. PMID:26619790

  11. China's Top-1000 Energy-Consuming Enterprises Program:Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China

    SciTech Connect

    Price, Lynn; Price, Lynn; Wang, Xuejun; Yun, Jiang

    2008-06-02

    In 2005, the Chinese government announced an ambitious goal of reducing energy consumption per unit of GDP by 20% between 2005 and 2010. One of the key initiatives for realizing this goal is the Top-1000 Energy-Consuming Enterprises program. The energy consumption of these 1000 enterprises accounted for 33% of national and 47% of industrial energy usage in 2004. Under the Top-1000 program, 2010 energy consumption targets were determined for each enterprise. The objective of this paper is to evaluate the program design and initial results, given limited information and data, in order to understand the possible implications of its success in terms of energy and carbon dioxide emissions reductions and to recommend future program modifications based on international experience with similar target-setting agreement programs. Even though the Top-1000 Program was designed and implemented rapidly, it appears that--depending upon the GDP growth rate--it could contribute to somewhere between approximately 10% and 25% of the savings required to support China's efforts to meet a 20% reduction in energy use per unit of GDP by 2010.

  12. Energy consumption and performance models of small Philippine-built rice mills

    SciTech Connect

    Paras, A.S. Jr.

    1984-01-01

    Two simulation models were developed for small rice mills of the conventional disc-cone and rubber-roll equipped designs that range from 0.3 to 1.8 tons-per-hour capacity. These sizes comprise a large proportion of the rice mills in the Philippines. The first, a computer model, evaluated these two types of mills with regard to energy consumption, total and head grain recovery, and processing time. Field and laboratory data taken by research workers and direct measurements by the author were compiled and employed in the development of equations and distribution functions for the variables that make up the subroutines for the models. The results indicated that the energy consumption of small rice mills in the Philippines could be reduced by 5 to 19%, depending on size, without loss of quality in good-performance mills by using one bigger huller and an adjustable separator, and that the output quality of poor performance mills could be improved with just 4% increase in energy consumption by adding a second stage whitener. The second model estimated the cost of milled rice by utilizing Kirchoff's current and voltage laws and energy conservation principles to derive a cost equation involving the material energy and processing cost.

  13. Causal nexus between energy consumption and carbon dioxide emission for Malaysia using maximum entropy bootstrap approach.

    PubMed

    Gul, Sehrish; Zou, Xiang; Hassan, Che Hashim; Azam, Muhammad; Zaman, Khalid

    2015-12-01

    This study investigates the relationship between energy consumption and carbon dioxide emission in the causal framework, as the direction of causality remains has a significant policy implication for developed and developing countries. The study employed maximum entropy bootstrap (Meboot) approach to examine the causal nexus between energy consumption and carbon dioxide emission using bivariate as well as multivariate framework for Malaysia, over a period of 1975-2013. This is a unified approach without requiring the use of conventional techniques based on asymptotical theory such as testing for possible unit root and cointegration. In addition, it can be applied in the presence of non-stationary of any type including structural breaks without any type of data transformation to achieve stationary. Thus, it provides more reliable and robust inferences which are insensitive to time span as well as lag length used. The empirical results show that there is a unidirectional causality running from energy consumption to carbon emission both in the bivariate model and multivariate framework, while controlling for broad money supply and population density. The results indicate that Malaysia is an energy-dependent country and hence energy is stimulus to carbon emissions. PMID:26282441

  14. Modeling of rotary cement kilns: Applications to reduction in energy consumption

    SciTech Connect

    Mujumdar, K.S.; Arora, A.; Ranade, V.V.

    2006-03-29

    We discuss and evaluate possible ways of reducing energy consumption in rotary cement kilns. A comprehensive one-dimensional model was developed to simulate complex processes occurring in rotary cement kilns. A modeling strategy comprising three submodels, viz. a model for simulating the variation of bed height in the kiln, a model for simulating reactions and heat transfer in the bed region, and a model for simulating coal combustion and heat transfer in the freeboard region, was developed. Melting and formation of coating within the kiln were accounted for. Combustion of coal in the freeboard region was modeled by accounting for devolatilization, finite-rate gas-phase combustion, and char reaction. The simulated results were validated with the available data from three industrial kilns. The model was then used to understand the influence of various design and operating parameters on kiln performance. Several ways of reducing energy consumption in kilns were then computationally investigated. The model was also used to propose and to evaluate a practical solution of using a secondary shell to reduce energy consumption in rotary cement kilns. Simulation results indicate that varying kiln operating variables, viz. solid flow rate or RPM, can result only in small changes in kiln energetics. Use of a secondary shell over the kiln and energy recovery by passing air through the annular gap between the two appears to be a promising way to achieve significant energy savings. The developed model and the presented results will be useful for enhancing the performance of rotary cement kilns.

  15. Causal nexus between energy consumption and carbon dioxide emission for Malaysia using maximum entropy bootstrap approach.

    PubMed

    Gul, Sehrish; Zou, Xiang; Hassan, Che Hashim; Azam, Muhammad; Zaman, Khalid

    2015-12-01

    This study investigates the relationship between energy consumption and carbon dioxide emission in the causal framework, as the direction of causality remains has a significant policy implication for developed and developing countries. The study employed maximum entropy bootstrap (Meboot) approach to examine the causal nexus between energy consumption and carbon dioxide emission using bivariate as well as multivariate framework for Malaysia, over a period of 1975-2013. This is a unified approach without requiring the use of conventional techniques based on asymptotical theory such as testing for possible unit root and cointegration. In addition, it can be applied in the presence of non-stationary of any type including structural breaks without any type of data transformation to achieve stationary. Thus, it provides more reliable and robust inferences which are insensitive to time span as well as lag length used. The empirical results show that there is a unidirectional causality running from energy consumption to carbon emission both in the bivariate model and multivariate framework, while controlling for broad money supply and population density. The results indicate that Malaysia is an energy-dependent country and hence energy is stimulus to carbon emissions.

  16. 10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF... Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. (a) Scope. This section provides the...

  17. 10 CFR 431.224 - Uniform test method for the measurement of energy consumption for traffic signal modules and...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... traffic signal modules and pedestrian modules. For purposes of 10 CFR part 431 and EPCA, the test... consumption for traffic signal modules and pedestrian modules. 431.224 Section 431.224 Energy DEPARTMENT OF... measurement of energy consumption for traffic signal modules and pedestrian modules. (a) Scope. This...

  18. Mode shift strategies in intercity transportation and their effect on energy consumption

    NASA Technical Reports Server (NTRS)

    Sokolsky, S.

    1975-01-01

    Policies are examined which, if implemented, could lead to significant energy savings in intercity travel in the northeast corridor arena, without restricting the traveler's freedom of mode choice. The effects on arena energy consumption of introducing new, more energy-efficient aircraft are investigated; and several strategies unrelated to the implementation of new aircraft are introduced to yield reductions in overall intercity energy use. In both parts of this analysis, resulting changes in patronage (modal share) and energy use are demonstrated, leading to new insights into the effectiveness of different potential policies for achieving energy conservation. Some observations on induced demand trends that could be associated with certain strategies and the resultant potential effect on energy conservation are provided.

  19. Indoor weather related to the energy consumption of air conditioned classroom: Monitoring system for energy efficient building plan

    NASA Astrophysics Data System (ADS)

    Rattanongphisat, W.; Suwannakom, A.; Harfield, A.

    2016-08-01

    The current research aims to investigate the relation of indoor weather to energy consumption of air conditioned classroom by design and construct the indoor weather and energy monitoring systems. In this research, a combined temperature and humidity sensor in conjunction with a microcontroller was constructed for the indoor weather monitoring system. The wire sensor network for the temperature-humidity sensor nodes is the Controller Area Network (CAN). Another part is using a nonintrusive method where a wireless current transformer sending the signal to the data collection box then transmitted by the radio frequency to the computer where the Ethernet application software was installed for the energy monitoring system. The results show that the setting air temperature, outdoor ambient temperature and operating time impact to the energy consumption of the air conditioned classroom.

  20. USING TIME VARIANT VOLTAGE TO CALCULATE ENERGY CONSUMPTION AND POWER USE OF BUILDING SYSTEMS

    SciTech Connect

    Makhmalbaf, Atefe; Augenbroe , Godfried

    2015-12-09

    Buildings are the main consumers of electricity across the world. However, in the research and studies related to building performance assessment, the focus has been on evaluating the energy efficiency of buildings whereas the instantaneous power efficiency has been overlooked as an important aspect of total energy consumption. As a result, we never developed adequate models that capture both thermal and electrical characteristics (e.g., voltage) of building systems to assess the impact of variations in the power system and emerging technologies of the smart grid on buildings energy and power performance and vice versa. This paper argues that the power performance of buildings as a function of electrical parameters should be evaluated in addition to systems’ mechanical and thermal behavior. The main advantage of capturing electrical behavior of building load is to better understand instantaneous power consumption and more importantly to control it. Voltage is one of the electrical parameters that can be used to describe load. Hence, voltage dependent power models are constructed in this work and they are coupled with existing thermal energy models. Lack of models that describe electrical behavior of systems also adds to the uncertainty of energy consumption calculations carried out in building energy simulation tools such as EnergyPlus, a common building energy modeling and simulation tool. To integrate voltage-dependent power models with thermal models, the thermal cycle (operation mode) of each system was fed into the voltage-based electrical model. Energy consumption of systems used in this study were simulated using EnergyPlus. Simulated results were then compared with estimated and measured power data. The mean square error (MSE) between simulated, estimated, and measured values were calculated. Results indicate that estimated power has lower MSE when compared with measured data than simulated results. Results discussed in this paper will illustrate the

  1. Analysis of Consumption of Energy Drinks by a Group of Adolescent Athletes

    PubMed Central

    Nowak, Dariusz; Jasionowski, Artur

    2016-01-01

    Background: Energy drinks (EDs) have become widely popular among young adults and, even more so, among adolescents. Increasingly, they are consumed by athletes, particularly those who have just begun their sporting career. Uncontrolled and high consumption of EDs, in addition to other sources of caffeine, may pose a threat to the health of young people. Hence, our objective was to analyze the consumption of EDs among teenagers engaged in sports, including quantity consumed, identification of factors influencing consumption, and risks associated with EDs and EDs mixed with alcohol (AmEDs). Methods: The study involved a specially designed questionnaire, which was completed by 707 students, 14.3 years of age on average, attending secondary sports schools. Results: EDs were consumed by 69% of the young athletes, 17% of whom drank EDs quite often: every day or 1–3 times a week. Most respondents felt no effects after drinking EDs, but some reported symptoms, including insomnia, anxiety, tachycardia, nervousness and irritability. The major determinant of the choice of EDs was taste (47%), followed by price (21%). One in ten respondents admitted to consumption of AmEDs. Among the consequences reported were: abdominal pains, nausea, vomiting, amnesia, headache, and hangover. Conclusions: EDs consumption among adolescent athletes was relatively high. Considering the habit of AmEDs and literature data, it is worth emphasizing that it may lead to health problems in the near future, alcohol- or drug-dependence, as well as other types of risk behaviour. PMID:27483299

  2. Energy consumption estimation of an OMAP-based Android operating system

    NASA Astrophysics Data System (ADS)

    González, Gabriel; Juárez, Eduardo; Castro, Juan José; Sanz, César

    2011-05-01

    System-level energy optimization of battery-powered multimedia embedded systems has recently become a design goal. The poor operational time of multimedia terminals makes computationally demanding applications impractical in real scenarios. For instance, the so-called smart-phones are currently unable to remain in operation longer than several hours. The OMAP3530 processor basically consists of two processing cores, a General Purpose Processor (GPP) and a Digital Signal Processor (DSP). The former, an ARM Cortex-A8 processor, is aimed to run a generic Operating System (OS) while the latter, a DSP core based on the C64x+, has architecture optimized for video processing. The BeagleBoard, a commercial prototyping board based on the OMAP processor, has been used to test the Android Operating System and measure its performance. The board has 128 MB of SDRAM external memory, 256 MB of Flash external memory and several interfaces. Note that the clock frequency of the ARM and DSP OMAP cores is 600 MHz and 430 MHz, respectively. This paper describes the energy consumption estimation of the processes and multimedia applications of an Android v1.6 (Donut) OS on the OMAP3530-Based BeagleBoard. In addition, tools to communicate the two processing cores have been employed. A test-bench to profile the OS resource usage has been developed. As far as the energy estimates concern, the OMAP processor energy consumption model provided by the manufacturer has been used. The model is basically divided in two energy components. The former, the baseline core energy, describes the energy consumption that is independent of any chip activity. The latter, the module active energy, describes the energy consumed by the active modules depending on resource usage.

  3. Energy-efficient approach to minimizing the energy consumption in an extended job-shop scheduling problem

    NASA Astrophysics Data System (ADS)

    Tang, Dunbing; Dai, Min

    2015-09-01

    The traditional production planning and scheduling problems consider performance indicators like time, cost and quality as optimization objectives in manufacturing processes. However, environmentally-friendly factors like energy consumption of production have not been completely taken into consideration. Against this background, this paper addresses an approach to modify a given schedule generated by a production planning and scheduling system in a job shop floor, where machine tools can work at different cutting speeds. It can adjust the cutting speeds of the operations while keeping the original assignment and processing sequence of operations of each job fixed in order to obtain energy savings. First, the proposed approach, based on a mixed integer programming mathematical model, changes the total idle time of the given schedule to minimize energy consumption in the job shop floor while accepting the optimal solution of the scheduling objective, makespan. Then, a genetic-simulated annealing algorithm is used to explore the optimal solution due to the fact that the problem is strongly NP-hard. Finally, the effectiveness of the approach is performed smalland large-size instances, respectively. The experimental results show that the approach can save 5%-10% of the average energy consumption while accepting the optimal solution of the makespan in small-size instances. In addition, the average maximum energy saving ratio can reach to 13%. And it can save approximately 1%-4% of the average energy consumption and approximately 2.4% of the average maximum energy while accepting the near-optimal solution of the makespan in large-size instances. The proposed research provides an interesting point to explore an energy-aware schedule optimization for a traditional production planning and scheduling problem.

  4. An analysis of residential energy consumption in a temperate climate. Volume 1

    SciTech Connect

    Clark, Y.Y.; Vincent, W.

    1987-06-01

    Electrical energy consumption data have been recorded for several hundred submetered residential structures in Middle Tennessee. All houses were constructed with a common ``energy package.`` Specifically, daily cooling usage data have been collected for 130 houses for the 1985 and 1986 cooling seasons, and monthly heating usage data for 186 houses have been recorded by occupant participation over a seven-year period. Cooling data have been analyzed using an SPSSx multiple regression analysis and results are compared to several cooling models. Heating, base, and total energy usage are also analyzed and regression correlation coefficients are determined as a function of several house parameters.

  5. An analysis of residential energy consumption in a temperate climate. Volume 2

    SciTech Connect

    Clark, Y.Y.; Vincent, W.

    1987-06-01

    Electrical energy consumption data have been recorded for several hundred submetered residential structures in Middle Tennessee. All houses were constructed with a common ``energy package.`` Specifically, daily cooling usage data have been collected for 130 houses for the 1985 and 1986 cooling seasons, and monthly heating usage data for 186 houses have been recorded by occupant participation over a seven-year period. Cooling data have been analyzed using an SPSSx multiple regression analysis and results are compared to several cooling models. Heating, base, and total energy usage are also analyzed and regression correlation coefficients are determined as a function of several house parameters.

  6. Energy consumption and expenditure projections by population group on the basis on the annual energy outlook 2000 forecast.

    SciTech Connect

    Poyer, D. A.; Decision and Information Sciences

    2001-05-31

    The changes in the patterns of energy use and expenditures by population group are analyzed by using the 1993 and 1997 Residential Energy Consumption Surveys. Historically, these patterns have differed among non-Hispanic White households, non-Hispanic Black households, and Hispanic households. Patterns of energy use and expenditures are influenced by geographic and metropolitan location, the composition of housing stock, economic and demographic status, and the composition of energy use by end-use category. As a consequence, as energy-related factors change across groups, patterns of energy use and expenditures also change. Over time, with changes in the composition of these factors by population group and their variable influences on energy use, the impact on energy use and expenditures has varied across these population groups.

  7. Estimating pumping time and ground-water withdrawals using energy- consumption data

    USGS Publications Warehouse

    Hurr, R.T.; Litke, D.W.

    1989-01-01

    Evaluation of the hydrology of an aquifer requires knowledge about the volume of groundwater in storage and also about the volume of groundwater withdrawals. Totalizer flow meters may be installed at pumping plants to measure withdrawals; however, it generally is impractical to equip all pumping plants in an area with meters. A viable alternative is the use of rate-time methods. Rate-time methods may be used at individual pumping plants to decrease the data collection necessary for determining withdrawals. At sites where pumping-time measurement devices are not installed, pumping time may be determined on the basis of energy consumption and power demand. At pumping plants where energy consumption is metered, data acquired by reading of meters is used to estimate pumping time. Care needs to be taken to read these meters correctly. At pumping plants powered by electricity, the calculations need to be modified if transformers are present. At pumping plants powered by natural gas, the effects of the pressure-correction factor need to be included in the calculations. At pumping plants powered by gasoline, diesel oil, or liquid petroleum gas, the geometry of storage tanks needs to be analyzed as part of the calculations. The relation between power demand and pumping rate at a pumping plant can be described through the use of the power-consumption coefficient. Where equipment and hydrologic conditions are stable, this coefficient can be applied to total energy consumption at a site to estimate total groundwater withdrawals. Random sampling of power consumption coefficients can be used to estimate area-wide groundwater withdrawal. (USGS)

  8. Using high frequency consumption data to identify demand response potential for solar energy integration

    NASA Astrophysics Data System (ADS)

    Jin, L.; Borgeson, S.; Fredman, D.; Hans, L.; Spurlock, A.; Todd, A.

    2015-12-01

    California's renewable portfolio standard (2012) requires the state to get 33% of its electricity from renewable sources by 2020. Increased share of variable renewable sources such as solar and wind in the California electricity system may require more grid flexibility to insure reliable power services. Such grid flexibility can be potentially provided by changes in end use electricity consumptions in response to grid conditions (demand-response). In the solar case, residential consumption in the late afternoon can be used as reserve capacity to balance the drop in solar generation. This study presents our initial attempt to identify, from a behavior perspective, residential demand response potentials in relation to solar ramp events using a data-driven approach. Based on hourly residential energy consumption data, we derive representative daily load shapes focusing on discretionary consumption with an innovative clustering analysis technique. We aggregate the representative load shapes into behavior groups in terms of the timing and rhythm of energy use in the context of solar ramp events. Households of different behavior groups that are active during hours with high solar ramp rates are identified for capturing demand response potential. Insights into the nature and predictability of response to demand-response programs are provided.

  9. Development of an energy consumption and cost data base for fuel cell total energy systems and conventional building energy systems

    SciTech Connect

    Pine, G.D.; Christian, J.E.; Mixon, W.R.; Jackson, W.L.

    1980-07-01

    This report describes the procedures and data sources used to develop an energy-consumption and system-cost data base for use in predicting the market penetration of phosphoric acid fuel cell total-energy systems in the nonindustrial building market. A computer program was used to simulate the hourly energy requirements of six types of buildings - office buildings, retail stores, hotels and motels, schools, hospitals, and multifamily residences. The simulations were done by using hourly weather tapes for one city in each of the ten Department of Energy administrative regions. Two types of building construction were considered, one for existing buildings and one for new buildings. A fuel cell system combined with electrically driven heat pumps and one combined with a gas boiler and an electrically driven chiller were compared with similar conventional systems. The methods of system simulation, component sizing, and system cost estimation are described for each system. The systems were simulated for a single building size for each building type. Methods were developed to extrapolate the system cost and performance data to other building sizes.

  10. Global energy issues affecting aeronautics: a reasoned conjecture

    NASA Astrophysics Data System (ADS)

    Allen, John E.

    1999-07-01

    This paper is a reasoned conjecture of the future up to 2050 AD including estimates of energy supply and consumption, transport system developments and corresponding pollution effects. Results of the logistic substitution methods (Volterra-Lotka) are used in forecasting trends in innovation, transport and energy. Later work on normative forecasts is also included. The future of aeronautics cannot be isolated from events in other transport modes which together create the major problem of crude oil replacement during the next century. Natural gas will be the dominant energy source for the next 80 years and a major question is how best to use it for aviation. The work on which this paper is based was started in 1992 to answer the following questions: Is the future oil shortfall sufficient to restrict aviation traffic and growth in the next 50 years? If so, what is its substitute? Can a substitute be obtained cheaply enough to free aviation from future kerosine shortages? Is it paramount to change to liquid hydrogen fuel to avoid future fuel shortage in aeronautics, incidentally conferring possible environmental advantages? There was no adequate evidence available to answer these questions, hence a method was devised to bring together several sets of partial data that contributed to the solution. The essence is to use the mean annual growth rate of traffic or energy over a future period as a pseudo-independent variable. This allows the inclusion of alternative high and low estimates of all the important quantities involved.

  11. Experimental Energy Consumption of Frame Slotted ALOHA and Distributed Queuing for Data Collection Scenarios

    PubMed Central

    Tuset-Peiro, Pere; Vazquez-Gallego, Francisco; Alonso-Zarate, Jesus; Alonso, Luis; Vilajosana, Xavier

    2014-01-01

    Data collection is a key scenario for the Internet of Things because it enables gathering sensor data from distributed nodes that use low-power and long-range wireless technologies to communicate in a single-hop approach. In this kind of scenario, the network is composed of one coordinator that covers a particular area and a large number of nodes, typically hundreds or thousands, that transmit data to the coordinator upon request. Considering this scenario, in this paper we experimentally validate the energy consumption of two Medium Access Control (MAC) protocols, Frame Slotted ALOHA (FSA) and Distributed Queuing (DQ). We model both protocols as a state machine and conduct experiments to measure the average energy consumption in each state and the average number of times that a node has to be in each state in order to transmit a data packet to the coordinator. The results show that FSA is more energy efficient than DQ if the number of nodes is known a priori because the number of slots per frame can be adjusted accordingly. However, in such scenarios the number of nodes cannot be easily anticipated, leading to additional packet collisions and a higher energy consumption due to retransmissions. Contrarily, DQ does not require to know the number of nodes in advance because it is able to efficiently construct an ad hoc network schedule for each collection round. This kind of a schedule ensures that there are no packet collisions during data transmission, thus leading to an energy consumption reduction above 10% compared to FSA. PMID:25061839

  12. On the developmenet of multi-linear regression analysis to assess energy consumption in the early stages of building design

    NASA Astrophysics Data System (ADS)

    Shams Amiri, Shideh

    Modeling of energy consumption in buildings is essential for different applications such as building energy management and establishing baselines. This makes building energy consumption estimation as a key tool to achieve the goals on energy consumption and emissions reduction. Energy performance of building is complex, since it depends on several parameters related to the building characteristics, equipment and systems, weather, occupants, and sociological influences. This paper presents a new model to predict and quantify energy consumption in commercial buildings in the early stages of the design. eQUEST and DOE-2 building simulation software was used to build and simulate individual building configuration that were generated using Monte Carlo simulation technique. Ten thousands simulations for seven building shapes were performed to create a comprehensive dataset covering the full ranges of design parameters. The present study considered building materials, their thickness, building shape, and occupant schedule as design variables since building energy performance is sensitive to these variables. Then, the results of the energy simulations were implemented into a set of regression equation to predict the energy consumption in each design scenario. The difference between regression-predicted and DOE-simulated annual building energy consumption are largely within 5%. It is envisioned that the developed regression models can be utilized to estimate the energy savings in the early stages of the design when different building schemes and design concepts are being considered. Keywords: eQUEST simulation, DOE-2 simulation, Monte Carlo simulation, Regression equations, Building energy performance

  13. Management of Energy Consumption on Cluster Based Routing Protocol for MANET

    NASA Astrophysics Data System (ADS)

    Hosseini-Seno, Seyed-Amin; Wan, Tat-Chee; Budiarto, Rahmat; Yamada, Masashi

    The usage of light-weight mobile devices is increasing rapidly, leading to demand for more telecommunication services. Consequently, mobile ad hoc networks and their applications have become feasible with the proliferation of light-weight mobile devices. Many protocols have been developed to handle service discovery and routing in ad hoc networks. However, the majority of them did not consider one critical aspect of this type of network, which is the limited of available energy in each node. Cluster Based Routing Protocol (CBRP) is a robust/scalable routing protocol for Mobile Ad hoc Networks (MANETs) and superior to existing protocols such as Ad hoc On-demand Distance Vector (AODV) in terms of throughput and overhead. Therefore, based on this strength, methods to increase the efficiency of energy usage are incorporated into CBRP in this work. In order to increase the stability (in term of life-time) of the network and to decrease the energy consumption of inter-cluster gateway nodes, an Enhanced Gateway Cluster Based Routing Protocol (EGCBRP) is proposed. Three methods have been introduced by EGCBRP as enhancements to the CBRP: improving the election of cluster Heads (CHs) in CBRP which is based on the maximum available energy level, implementing load balancing for inter-cluster traffic using multiple gateways, and implementing sleep state for gateway nodes to further save the energy. Furthermore, we propose an Energy Efficient Cluster Based Routing Protocol (EECBRP) which extends the EGCBRP sleep state concept into all idle member nodes, excluding the active nodes in all clusters. The experiment results show that the EGCBRP decreases the overall energy consumption of the gateway nodes up to 10% and the EECBRP reduces the energy consumption of the member nodes up to 60%, both of which in turn contribute to stabilizing the network.

  14. 10 CFR Appendix X to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... of Dehumidifiers X Appendix X to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. X Appendix X to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption...

  15. 10 CFR Appendix X to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... of Dehumidifiers X Appendix X to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. X Appendix X to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption...

  16. 10 CFR Appendix E to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Water Heaters

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of Water Heaters E Appendix E to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. E Appendix E to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of...

  17. 10 CFR Appendix Y to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Battery Chargers

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of Battery Chargers Y Appendix Y to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. Y Appendix Y to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of...

  18. 10 CFR Appendix F to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Room Air Conditioners

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of Room Air Conditioners F Appendix F to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. F Appendix F to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Room...

  19. Effect of standard of living on energy consumption and the CO{sub 2} greenhouse effect

    SciTech Connect

    Hung-Yee Shu; Ming-Chin Chang; Shaw, H.

    1996-12-31

    Per capita energy growth patterns were lumped into 6 global regions of similar sociopolitical background, and used to project the rate of growth of atmospheric CO{sub 2}. The 6 key global regions specifically considered were: (1) North America (U.S. and Canada) [NA], (2) Middle East (North Africa and Persian Gulf States) [ME], (3) Commonwealth of Independent States and Eastern Europe [CISEE], (4) China and other centrally planned Asiatic economies [CPAE], (5) Industrialized Countries (including Western Europe, Australia, New Zealand, Israel, Japan, and South Africa) [IC], (6) Less Developed Countries (including all of South and Central America, Central Africa, and the rest of Asia) [LDC]. LDC population will grow 2.7 times from 50 to 67% of world population from 1990 to 2100. Over the same period, world population will grow from 5.2 to 11.9 billion people, and energy use from 15 to 60 TW. LDC energy use will grow disproportionately faster from 20 to 40%, and that in IC will slow from 30 to 22% of world energy. Data on the gross domestic product (GDP) from the World Bank were used as surrogates for standard of living (SOL) to relate world energy consumption with SOL. Per capita energy consumption varied linearly with per capita GDP for the LDC, but was independent of GDP for IC. The per capita energy consumption was multiplied by the population to project the total world energy consumption. We projected that non-fossil energy sources consisting mostly of nuclear energy will overtake fossil energy consisting mostly of coal derived products in the year 2075. The growth of CO{sub 2} emissions from 6 to 18.2 GtC/a will result in an average global temperature increase of 3{degrees}C due to this source only. However, CO{sub 2} is only about half the problem. When all infrared absorbing gases are considered, an average increase of 5.6 {degrees}C is projected for 2100. 7 figs., 1 tab.

  20. Review of the indoor environmental quality and energy consumption studies for low income households in Europe.

    PubMed

    Kolokotsa, D; Santamouris, M

    2015-12-01

    The term energy poverty is used to describe a situation of a household not able to satisfy socially and materially the required levels of its energy services. Energy and fuel poverty is an increasing problem in the European Union. Although the specific conditions vary from country to country the drivers defining fuel and energy poverty are similar in all Europe. This paper aims to present the state of the art regarding the energy demand and indoor environmental quality of low income households in Europe. The characteristics of this specific population group are presented including details on the specific energy consumption, the indoor comfort and finally the impact of the specific living conditions on the occupants' health. PMID:26225739

  1. An investigation of the energy consumption and conversion of piezoelectric actuators integrated in active structures

    SciTech Connect

    Liang, C.; Sun, F.; Rogers, C.A.

    1994-12-31

    This paper quantifies the energy consumption and conversion of an active structure driven by piezoelectric ceramic (PZT) actuators. The principle and methodology discussed in this paper may also be applied to other active structures with different types of actuators. The paper first discusses the energy conversion of PZT actuator materials, including the energy dissipation and electro-mechanical energy conversion. The energy conversion efficiency for the static and dynamic applications of PZT actuator is then defined and discussed. A numerical case study has also been conducted. One of the major conclusions from the investigation is that the physical process of energy conversion (electrical to mechanical and vice versa) within an induced strain actuator depends on the operating conditions of the actuator, namely, the type of structure it interacts, as well as the structural impedance.

  2. Final Technical Report - Advanced Optical Sensors to Minimize Energy Consumption in Polymer Extrusion Processes

    SciTech Connect

    Susan J. Foulk

    2012-07-24

    Project Objective: The objectives of this study are to develop an accurate and stable on-line sensor system to monitor color and composition on-line in polymer melts, to develop a scheme for using the output to control extruders to eliminate the energy, material and operational costs of off-specification product, and to combine or eliminate some extrusion processes. Background: Polymer extrusion processes are difficult to control because the quality achieved in the final product is complexly affected by the properties of the extruder screw, speed of extrusion, temperature, polymer composition, strength and dispersion properties of additives, and feeder system properties. Extruder systems are engineered to be highly reproducible so that when the correct settings to produce a particular product are found, that product can be reliably produced time after time. However market conditions often require changes in the final product, different products or grades may be processed in the same equipment, and feed materials vary from lot to lot. All of these changes require empirical adjustment of extruder settings to produce a product meeting specifications. Optical sensor systems that can continuously monitor the composition and color of the extruded polymer could detect process upsets, drift, blending oscillations, and changes in dispersion of additives. Development of an effective control algorithm using the output of the monitor would enable rapid corrections for changes in materials and operating conditions, thereby eliminating most of the scrap and recycle of current processing. This information could be used to identify extruder systems issues, diagnose problem sources, and suggest corrective actions in real-time to help keep extruder system settings within the optimum control region. Using these advanced optical sensor systems would give extruder operators real-time feedback from their process. They could reduce the amount of off-spec product produced and

  3. Computer usage and national energy consumption: Results from a field-metering study

    SciTech Connect

    Desroches, Louis-Benoit; Fuchs, Heidi; Greenblatt, Jeffery; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah; Young, Scott

    2014-12-01

    The electricity consumption of miscellaneous electronic loads (MELs) in the home has grown in recent years, and is expected to continue rising. Consumer electronics, in particular, are characterized by swift technological innovation, with varying impacts on energy use. Desktop and laptop computers make up a significant share of MELs electricity consumption, but their national energy use is difficult to estimate, given uncertainties around shifting user behavior. This report analyzes usage data from 64 computers (45 desktop, 11 laptop, and 8 unknown) collected in 2012 as part of a larger field monitoring effort of 880 households in the San Francisco Bay Area, and compares our results to recent values from the literature. We find that desktop computers are used for an average of 7.3 hours per day (median = 4.2 h/d), while laptops are used for a mean 4.8 hours per day (median = 2.1 h/d). The results for laptops are likely underestimated since they can be charged in other, unmetered outlets. Average unit annual energy consumption (AEC) for desktops is estimated to be 194 kWh/yr (median = 125 kWh/yr), and for laptops 75 kWh/yr (median = 31 kWh/yr). We estimate national annual energy consumption for desktop computers to be 20 TWh. National annual energy use for laptops is estimated to be 11 TWh, markedly higher than previous estimates, likely reflective of laptops drawing more power in On mode in addition to greater market penetration. This result for laptops, however, carries relatively higher uncertainty compared to desktops. Different study methodologies and definitions, changing usage patterns, and uncertainty about how consumers use computers must be considered when interpreting our results with respect to existing analyses. Finally, as energy consumption in On mode is predominant, we outline several energy savings opportunities: improved power management (defaulting to low-power modes after periods of inactivity as well as power scaling), matching the rated power

  4. Landauer in the Age of Synthetic Biology: Energy Consumption and Information Processing in Biochemical Networks

    NASA Astrophysics Data System (ADS)

    Mehta, Pankaj; Lang, Alex H.; Schwab, David J.

    2016-03-01

    A central goal of synthetic biology is to design sophisticated synthetic cellular circuits that can perform complex computations and information processing tasks in response to specific inputs. The tremendous advances in our ability to understand and manipulate cellular information processing networks raises several fundamental physics questions: How do the molecular components of cellular circuits exploit energy consumption to improve information processing? Can one utilize ideas from thermodynamics to improve the design of synthetic cellular circuits and modules? Here, we summarize recent theoretical work addressing these questions. Energy consumption in cellular circuits serves five basic purposes: (1) increasing specificity, (2) manipulating dynamics, (3) reducing variability, (4) amplifying signal, and (5) erasing memory. We demonstrate these ideas using several simple examples and discuss the implications of these theoretical ideas for the emerging field of synthetic biology. We conclude by discussing how it may be possible to overcome these limitations using "post-translational" synthetic biology that exploits reversible protein modification.

  5. Reduced energy consumption evaporator for use in desalting impaired waters. Technical completion report (Final)

    SciTech Connect

    Tleimat, B.W.; Tleimat, M.C.

    1995-06-01

    The basic objective of this program is to demonstrate significant savings in energy consumption by the use of the wiped film rotating disk (WFRD) evaporator in a five-effect vapor compression distillation (MEVCD) system to recover the maximum amount of water from agricultural drainage water and other impaired waters. Tests were conducted using a 10,000 ppm aqueous solution of sodium sulfate and sodium chloride to simulate the composition of agricultural drainage water in the San Joaquin Valley, California. The feed was concentrated by a factor ranging from 15 to 20 resulting in a blowdown salinity of 150,000 to 200,000 ppm. The results showed the presence of dissolved salts has significant influence on energy consumption by the compressor of a commercial 60,000 gal/day VCD unit tested at Los Banos, California.

  6. Harvesting microalgal biomass using a magnetically induced membrane vibration (MMV) system: filtration performance and energy consumption.

    PubMed

    Bilad, M R; Discart, V; Vandamme, D; Foubert, I; Muylaert, K; Vankelecom, Ivo F J

    2013-06-01

    This study was performed to investigate the effectiveness of submerged microfiltration to harvest both a marine diatom Phaeodactylum tricornutum and a Chlorella vulgaris in a recently developed magnetically induced membrane vibrating (MMV) system. We assess the filtration performance by conducting the improved flux step method (IFM), fed-batch concentration filtrations and membrane fouling autopsy using two lab-made membranes with different porosity. The full-scale energy consumption was also estimated. Overall results suggest that the MMV offers a good fouling control and the process was proven to be economically attractive. By combining the membrane filtration (15× concentration) with centrifugation to reach a final concentration of 25% w/v, the energy consumption to harvest P. tricornutum and C. vulgaris was, respectively, as low as 0.84 and 0.77kWh/m(3), corresponding to 1.46 and 1.39 kWh/kg of the harvested biomass.

  7. Detecting the relationship between economic growth, CO2 and energy consumption by using panel data approach

    NASA Astrophysics Data System (ADS)

    Sayed, Ahmed R. M. Al; Isa, Zaidi

    2015-09-01

    Many scholars have shown their interest into the relationship between energy consumption (EC), gross domestic product (GDP) and emissions. The main objective of this study is to investigate the relationship between GDP, EC and CO2 within multivariate model by using panel data method in Asian countries; Korea, Malaysia, Japan and China for annually data during the period 1960 to 2010. The main finding shows that CO2 can be explained more than 86% & 78% by EC and GDP in each of cross section model and period model respectively. As a result of that, CO2 emissions should be considered as an important factor in energy consumption and gross domestic product by policy maker.

  8. Effect of hydrocolloids on the energy consumption and quality of frozen noodles.

    PubMed

    Pan, Zhi-Li; Ai, Zhi-Lu; Wang, Tao; Wang, Yu-Hong; Zhang, Xiu-Ling

    2016-05-01

    Effects of hydrocolloids such as Sodium polyacrylate, xanthan gum and sodium alginate on the energy consumption and quality of frozen cooked noodles were investigated. Results showed that gelatinization temperature (GT) shortened significantly and texture properties (hardness, firmness, break strength) of frozen cooked noodle were significantly improved by adding different hydrocolloid additives (P < 0.05). Nevertheless, there were no significant differences of glass-transition temperature between hydrocolloid fortified and non fortified frozen cooked noodles. Moreover, the hydrocolloids improved quality of cooked noodle and increased energy consumption, however, xanthan gum showed the best results. The optimized constituents were: sodium polyacrylate 0.13 %, xanthan gum 0.86 %, sodium alginate 0.18 % with predicted sensory scores of 90.30. The study showed that hydrocolloids could be used as modifying agents in frozen cooked noodle process. PMID:27407208

  9. Exposure to alcohol commercials in movie theaters affects actual alcohol consumption in young adult high weekly drinkers: an experimental study.

    PubMed

    Koordeman, Renske; Anschutz, Doeschka J; Engels, Rutger C M E

    2011-01-01

    The present pilot study examined the effects of alcohol commercials shown in movie theaters on the alcohol consumption of young adults who see these commercials. A two (alcohol commercials vs. nonalcohol commercials) by two (high weekly alcohol consumption vs. low weekly alcohol consumption) between-participant design was used, in which 184 young adults (age: 16-28 years) were exposed to a movie that was preceded by either alcohol commercials or nonalcohol commercials. Participants' actual alcohol consumption while watching the movie ("Watchmen") was examined. An analysis of variance (ANOVA) was conducted to examine the effects of the commercial condition on alcohol consumption. An interaction effect was found between commercial condition and weekly alcohol consumption (p < .001). Alcohol consumption among high weekly alcohol drinkers was higher in the alcohol commercial condition than in the nonalcohol commercial condition, whereas no differences were found in alcohol consumption between commercial conditions among low weekly alcohol drinkers. No gender differences were found in the association between exposure to alcohol commercials, weekly drinking, and alcohol use. Thus, exposure to alcohol commercials prior to a movie in a movie theater can directly influence alcohol consumption among high weekly alcohol consumers. PMID:21477057

  10. Exposure to alcohol commercials in movie theaters affects actual alcohol consumption in young adult high weekly drinkers: an experimental study.

    PubMed

    Koordeman, Renske; Anschutz, Doeschka J; Engels, Rutger C M E

    2011-01-01

    The present pilot study examined the effects of alcohol commercials shown in movie theaters on the alcohol consumption of young adults who see these commercials. A two (alcohol commercials vs. nonalcohol commercials) by two (high weekly alcohol consumption vs. low weekly alcohol consumption) between-participant design was used, in which 184 young adults (age: 16-28 years) were exposed to a movie that was preceded by either alcohol commercials or nonalcohol commercials. Participants' actual alcohol consumption while watching the movie ("Watchmen") was examined. An analysis of variance (ANOVA) was conducted to examine the effects of the commercial condition on alcohol consumption. An interaction effect was found between commercial condition and weekly alcohol consumption (p < .001). Alcohol consumption among high weekly alcohol drinkers was higher in the alcohol commercial condition than in the nonalcohol commercial condition, whereas no differences were found in alcohol consumption between commercial conditions among low weekly alcohol drinkers. No gender differences were found in the association between exposure to alcohol commercials, weekly drinking, and alcohol use. Thus, exposure to alcohol commercials prior to a movie in a movie theater can directly influence alcohol consumption among high weekly alcohol consumers.

  11. Baseline test data for the EVA electric vehicle. [low energy consumption automobiles

    NASA Technical Reports Server (NTRS)

    Harhay, W. C.; Bozek, J.

    1976-01-01

    Two electric vehicles from Electric Vehicle Associates were evaluated for ERDA at the Transportation Research Center of Ohio. The vehicles, loaded to a gross vehicle weight of 3750 pounds, had a range of 56.3 miles at a steady speed of 25 mph and a 27.4 miles range during acceleration-deceleration tests to a top speed of 30 mph. Energy consumption varied from 0.48 kw-hr/mi. to 0.59 kw-hr/mi.

  12. Current Status and Future Scenarios of Residential Building Energy Consumption in China

    SciTech Connect

    Zhou, Nan; Nishida, Masaru; Gao, Weijun

    2008-12-01

    China's rapid economic expansion has propelled it into the ranks of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. Even though the rapid growth is largely attributable to heavy industry, this in turn is driven by rapid urbanization process, by construction materials and equipment produced for use in buildings. Residential energy is mostly used in urban areas, where rising incomes have allowed acquisition of home appliances, as well as increased use of heating in southern China. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modeling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities.

  13. Factors affecting domestic water consumption in rural households upon access to improved water supply: insights from the Wei River Basin, China.

    PubMed

    Fan, Liangxin; Liu, Guobin; Wang, Fei; Geissen, Violette; Ritsema, Coen J

    2013-01-01

    Comprehensively understanding water consumption behavior is necessary to design efficient and effective water use strategies. Despite global efforts to identify the factors that affect domestic water consumption, those related to domestic water use in rural regions have not been sufficiently studied, particularly in villages that have gained access to improved water supply. To address this gap, we investigated 247 households in eight villages in the Wei River Basin where three types of improved water supply systems are implemented. Results show that domestic water consumption in liters per capita per day was significantly correlated with water supply pattern and vegetable garden area, and significantly negatively correlated with family size and age of household head. Traditional hygiene habits, use of water appliances, and preference for vegetable gardening remain dominant behaviors in the villages with access to improved water supply. Future studies on rural domestic water consumption should pay more attention to user lifestyles (water appliance usage habits, outdoor water use) and cultural backgrounds (age, education).

  14. Political ideology affects energy-efficiency attitudes and choices

    PubMed Central

    Gromet, Dena M.; Kunreuther, Howard; Larrick, Richard P.

    2013-01-01

    This research demonstrates how promoting the environment can negatively affect adoption of energy efficiency in the United States because of the political polarization surrounding environmental issues. Study 1 demonstrated that more politically conservative individuals were less in favor of investment in energy-efficient technology than were those who were more politically liberal. This finding was driven primarily by the lessened psychological value that more conservative individuals placed on reducing carbon emissions. Study 2 showed that this difference has consequences: In a real-choice context, more conservative individuals were less likely to purchase a more expensive energy-efficient light bulb when it was labeled with an environmental message than when it was unlabeled. These results highlight the importance of taking into account psychological value-based considerations in the individual adoption of energy-efficient technology in the United States and beyond. PMID:23630266

  15. The projection of world geothermal energy consumption from time series and regression model

    NASA Astrophysics Data System (ADS)

    Simanullang, Elwin Y.; Supriatna, Agus; Supriatna, Asep K.

    2015-12-01

    World population growth has many impacts on human live activities and other related aspects. One among the aspects is the increase of the use of energy to support human daily activities, covering industrial aspect, transportation, domestic activities, etc. It is plausible that the higher the population size in a country the higher the needs for energy to support all aspects of human activities in the country. Considering the depletion of petroleum and other fossil-based energy, recently there is a tendency to use geothermal as other source of energy. In this paper we will discuss the prediction of the world consumption of geothermal energy by two different methods, i.e. via the time series of the geothermal usage and via the time series of the geothermal usage combined with the prediction of the world total population. For the first case, we use the simple exponential smoothing method while for the second case we use the simple regression method. The result shows that taking into account the prediction of the world population size giving a better prediction to forecast a short term of the geothermal energy consumption.

  16. Energy consumption due to local travel by urban households under three alternative policies: 1980 to 2000

    SciTech Connect

    Singh, M K

    1981-11-01

    An evaluation was made of total energy consumption, by fuel type, resulting from local travel (by urban households) in 1980, 1990, and 2000, in two scenarios and three alternative policies. Energy consumed in vehicle operation, fuel production, vehicle production, and infrastructure construction was projected; and the relative impact of each policy was also evaluated. The results indicate that the Group Travel and Individual Travel Policies in both scenarios save on total energy use and total petroleum use relative to the In-Place Travel Policy in both scenarios. However, the results also indicate that some of the savings achieved in direct energy consumed by vehicle operation under the Group Travel and Individual Travel Policies are offset by the increased energy required to manufacture the vehicles and to build the infrastructure associated with these policies.

  17. Towards an Optimal Energy Consumption for Unattended Mobile Sensor Networks through Autonomous Sensor Redeployment

    PubMed Central

    Jia, Jie; Wen, Yingyou; Zhao, Dazhe

    2014-01-01

    Energy hole is an inherent problem caused by heavier traffic loads of sensor nodes nearer the sink because of more frequent data transmission, which is strongly dependent on the topology induced by the sensor deployment. In this paper, we propose an autonomous sensor redeployment algorithm to balance energy consumption and mitigate energy hole for unattended mobile sensor networks. First, with the target area divided into several equal width coronas, we present a mathematical problem modeling sensor node layout as well as transmission pattern to maximize network coverage and reduce communication cost. And then, by calculating the optimal node density for each corona to avoid energy hole, a fully distributed movement algorithm is proposed, which can achieve an optimal distribution quickly only by pushing or pulling its one-hop neighbors. The simulation results demonstrate that our algorithm achieves a much smaller average moving distance and a much longer network lifetime than existing algorithms and can eliminate the energy hole problem effectively. PMID:24949494

  18. The updated algorithm of the Energy Consumption Program (ECP): A computer model simulating heating and cooling energy loads in buildings

    NASA Technical Reports Server (NTRS)

    Lansing, F. L.; Strain, D. M.; Chai, V. W.; Higgins, S.

    1979-01-01

    The energy Comsumption Computer Program was developed to simulate building heating and cooling loads and compute thermal and electric energy consumption and cost. This article reports on the new additional algorithms and modifications made in an effort to widen the areas of application. The program structure was rewritten accordingly to refine and advance the building model and to further reduce the processing time and cost. The program is noted for its very low cost and ease of use compared to other available codes. The accuracy of computations is not sacrificed however, since the results are expected to lie within + or - 10% of actual energy meter readings.

  19. Energy Drink Consumption in Europe: A Review of the Risks, Adverse Health Effects, and Policy Options to Respond

    PubMed Central

    Breda, João Joaquim; Whiting, Stephen Hugh; Encarnação, Ricardo; Norberg, Stina; Jones, Rebecca; Reinap, Marge; Jewell, Jo

    2014-01-01

    With the worldwide consumption of energy drinks increasing in recent years, concerns have been raised both in the scientific community and among the general public about the health effects of these products. Recent studies provide data on consumption patterns in Europe; however, more research is needed to determine the potential for adverse health effects related to the increasing consumption of energy drinks, particularly among young people. A review of the literature was conducted to identify published articles that examined the health risks, consequences, and policies related to energy drink consumption. The health risks associated with energy drink consumption are primarily related to their caffeine content, but more research is needed that evaluates the long-term effects of consuming common energy drink ingredients. The evidence indicating adverse health effects due to the consumption of energy drinks with alcohol is growing. The risks of heavy consumption of energy drinks among young people have largely gone unaddressed and are poised to become a significant public health problem in the future. PMID:25360435

  20. What are the health implications associated with the consumption of energy drinks? A systematic review.

    PubMed

    Burrows, Tracy; Pursey, Kirrilly; Neve, Melinda; Stanwell, Peter

    2013-03-01

    There is increasing interest regarding the potential health effects of energy drink (ED) consumption. The aim of the present review was to investigate the existing evidence on health outcomes associated with ED consumption. Studies published between 1966 and February 2011 were retrieved and included if they met the following criteria: were randomized or pseudo randomized control trials; studied a human population; reported a health-related measure; and investigated a whole ED (as opposed to individual ingredients). Study quality was evaluated and data extracted using standardized tools. Fifteen studies were identified, the majority of which had less than 30 participants and included a short term of follow-up (range: 30 min-3 h). The following outcome measures were included: cardiorespiratory effects, physiological measures, pathological measures, and body composition. The mean dosage of ED was 390 mL (range: 250-750 mL). Commercial ED funding and/or study associations were identified in six studies. Studies investigating long-term consumption and follow-up were lacking. The findings from this review do not allow definitive dietary recommendations to be made regarding safe levels of ED consumption; caution should be exercised when consuming these drinks until further high-quality research is undertaken to substantiate findings. PMID:23452281

  1. Survey of socio-economic and contextual factors of households׳ energy consumption

    PubMed Central

    Jridi, Omar; Nouri, Fethi Zouheir

    2015-01-01

    We present a set of data relating to the investigation of the Tunisian Company of Electricity and Gas (STEG). The census is done on a sample of 3000 electrified households. The questionnaire is divided into three main sections: household socioeconomic status, contextual characteristics related to their housing and technical characteristics of equipments used. The objective of this survey is to achieve a reliable and detailed knowledge on the behavior of household energy consumption, particularly for energy saving behavior. This objective has recently been the subject of a research article Jridi et al. (2015) [2]. PMID:26568974

  2. Survey of socio-economic and contextual factors of households׳ energy consumption.

    PubMed

    Jridi, Omar; Nouri, Fethi Zouheir

    2015-12-01

    We present a set of data relating to the investigation of the Tunisian Company of Electricity and Gas (STEG). The census is done on a sample of 3000 electrified households. The questionnaire is divided into three main sections: household socioeconomic status, contextual characteristics related to their housing and technical characteristics of equipments used. The objective of this survey is to achieve a reliable and detailed knowledge on the behavior of household energy consumption, particularly for energy saving behavior. This objective has recently been the subject of a research article Jridi et al. (2015) [2]. PMID:26568974

  3. Ingestion of Plastic Microfibers by the Crab Carcinus maenas and Its Effect on Food Consumption and Energy Balance.

    PubMed

    Watts, Andrew J R; Urbina, Mauricio A; Corr, Shauna; Lewis, Ceri; Galloway, Tamara S

    2015-12-15

    Microscopic plastic fragments (<5 mm) are a worldwide conservation issue, polluting both coastal and marine environments. Fibers are the most prominent plastic type reported in the guts of marine organisms, but their effects once ingested are unknown. This study investigated the fate of polypropylene rope microfibers (1-5 mm in length) ingested by the crab Carcinus maenas and the consequences for the crab's energy budget. In chronic 4 week feeding studies, crabs that ingested food containing microfibers (0.3-1.0% plastic by weight) showed reduced food consumption (from 0.33 to 0.03 g d(-1)) and a significant reduction in energy available for growth (scope for growth) from 0.59 to -0.31 kJ crab d(-1) in crabs fed with 1% plastic. The polypropylene microfibers were physically altered by their passage through the foregut and were excreted with a smaller overall size and length and amalgamated into distinctive balls. These results support of the emerging paradigm that a key biological impact of microplastic ingestion is a reduction in energy budgets for the affected marine biota. We also provide novel evidence of the biotransformations that can affect the plastics themselves following ingestion and excretion. PMID:26529464

  4. Ingestion of Plastic Microfibers by the Crab Carcinus maenas and Its Effect on Food Consumption and Energy Balance.

    PubMed

    Watts, Andrew J R; Urbina, Mauricio A; Corr, Shauna; Lewis, Ceri; Galloway, Tamara S

    2015-12-15

    Microscopic plastic fragments (<5 mm) are a worldwide conservation issue, polluting both coastal and marine environments. Fibers are the most prominent plastic type reported in the guts of marine organisms, but their effects once ingested are unknown. This study investigated the fate of polypropylene rope microfibers (1-5 mm in length) ingested by the crab Carcinus maenas and the consequences for the crab's energy budget. In chronic 4 week feeding studies, crabs that ingested food containing microfibers (0.3-1.0% plastic by weight) showed reduced food consumption (from 0.33 to 0.03 g d(-1)) and a significant reduction in energy available for growth (scope for growth) from 0.59 to -0.31 kJ crab d(-1) in crabs fed with 1% plastic. The polypropylene microfibers were physically altered by their passage through the foregut and were excreted with a smaller overall size and length and amalgamated into distinctive balls. These results support of the emerging paradigm that a key biological impact of microplastic ingestion is a reduction in energy budgets for the affected marine biota. We also provide novel evidence of the biotransformations that can affect the plastics themselves following ingestion and excretion.

  5. White Whole-Wheat Flour Can Be Partially Substituted for Refined-Wheat Flour in Pizza Crust in School Meals without Affecting Consumption

    ERIC Educational Resources Information Center

    Chan, Hing Wan; Burgess Champoux, Teri; Reicks, Marla; Vickers, Zata; Marquart, Len

    2008-01-01

    Objectives: Recent dietary guidance recommends that children consume at least three servings of whole-grains daily. This study examined whether white whole-wheat (WWW) flour can be partially substituted for refined-wheat (RW) flour in pizza crust without affecting consumption by children in a school cafeteria. Methods: Subjects included first to…

  6. Decadal trends in fossil fuel energy consumption and related air pollutant emissions

    NASA Astrophysics Data System (ADS)

    Shekar Reddy, M.; Venkataraman, C.; Boucher, O.

    2003-04-01

    The economic liberalization in the early 1990s in India fuelled the industrial production, enabled the decadal annual average rate of 5.9% in the gross domestic product (GDP) during 1990-2000. This resulted in a steady increase of fossil fuels energy consumption throughout the decade. This paper investigates the trends in the GDP growth rate, sectoral fossil fuels consumption and resultant atmospheric air pollutant emissions during the above period. The fossil fuels energy consumption in the 1990 was 6875 PJ, and increased to 10801 PJ in 2000, with a decadal annual average growth rate of 5.7%. Share of the coal and petroleum fuels are 52% and 35%, respectively during 2000. The relative share contribution of power, industrial, transport, and domestic sectors are 40%, 48%, 5% and 7%, respectively. The contribution of various sectors to fossil fuels energy consumption, and the relative distribution of the different fuels within each sector will be discussed. The annual sulfur dioxide (SO_2) and aerosols (particulate matter, black carbon, organic carbon) emissions are estimated using sector and fuel specific average emission factors (mass of pollutant per unit mass of fuel burnt). The estimates take into account the changes in the fuel characteristics and technology during the study period. The estimated SO_2 emissions are 1.7 Tg S yr-1 in 1990 and increased to 2.5 Tg S yr-1 in 2000, with an annual average increase of 5%. Majority of the SO_2 emissions are from coal consumption accounting 62%, predominantly from the power plants. Trends in fuel and sectoral contributions to SO2 emissions over the decade will be presented. In the transportation sector, diesels contribute significantly to BC. Notably, in India, two-stroke engines account for 78% of total vehicle fleet, and contribute significantly to organic carbon emissions. An analysis of available SO_2 and aerosols concentration measurements will be made to explore the possible correlations between trends in the

  7. Energy consumption based on heating/cooling degree days within the urban environment of Athens, Greece

    NASA Astrophysics Data System (ADS)

    Moustris, K. P.; Nastos, P. T.; Bartzokas, A.; Larissi, I. K.; Zacharia, P. T.; Paliatsos, A. G.

    2015-11-01

    The degree-day method is considered to be a fundamental and a rather simple method to estimate heating and cooling energy demand. This study aims in a detailed and accurate assessment of cooling and heating degree days in different locations within the Greater Athens area (GAA), Greece. To achieve this goal, hourly values of air temperature from eight different locations within the GAA, covering the period 2001-2005, were used. Thus, the monthly and the annual number of cooling and heating degree days for each one of the examined locations could be estimated separately. Furthermore, an effort is made to evaluate the energy consumption for a specific building, based on the degree-day method, to indicate the impact of the canopy layer urban heat island on neighboring regions within the GAA. Results reveal that there is great spatial variability of energy demand and energy consumption along with significant differences in expenses for heating and cooling among neighboring regions within the GAA. Finally, regarding the energy demands of buildings, it is important to take into account intra-urban variability of canopy layer climates against an ensemble mean throughout the city, because the latter can result in inaccurate estimations and conclusions.

  8. 10 CFR Appendix E to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Water Heaters

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... of Water Heaters E Appendix E to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix E to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Water Heaters 1. Definitions 1.1Cut-in means the time when or water temperature at which a water heater...

  9. 10 CFR Appendix E to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Water Heaters

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... of Water Heaters E Appendix E to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY ENERGY... Appendix E to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Water Heaters 1. Definitions 1.1Cut-in means the time when or water temperature at which a water heater...

  10. Effects of microwave - fluidized bed drying on quality, energy consumption and drying kinetics of soybean kernels.

    PubMed

    Khoshtaghaza, Mohammad Hadi; Darvishi, Hosain; Minaei, Saeid

    2015-08-01

    Moisture content of soybean kernel at harvest time is too high for storage, and needs to be reduced. In this research, drying characteristics, quality and energy requirement for microwave-fluidized bed drying of soybean kernels were studied. The results showed that air temperature (80-140 °C), velocity (1.8-4.5 m/s) and microwave power (200-500 W) significantly influenced drying time, moisture diffusivity, rehydration capacity, cracking, and specific energy consumption (P ≤ 0.05). Among the applied models, Page's model has the best performance to estimate the microwave-fluidized bed drying behavior of the soybean kernels. Moisture diffusivity values increased (6.25 × 10(-10) to 42.14 × 10(-10) m(2)/s) as the air velocity decreased and air temperature and microwave power increased. Activation energy was foundto be between 3.33 and 17.70 kJ/mol. Minimum cracking percentage of soybean kernels (12.96 %) was obtained at 80 °C, 1.8 m/s and 200 W treatments. The increase in microwave power and decrease in air velocity level decreased the rehydration capacity. Specific energy consumption varied from 50.94 to 338.76 MJ/kg water and the lowest specific energy consumption were obtained at 80 °C, 4.5 m/s and 500 W. PMID:26243896

  11. Characterizing China's energy consumption with selective economic factors and energy-resource endowment: a spatial econometric approach

    NASA Astrophysics Data System (ADS)

    Jiang, Lei; Ji, Minhe; Bai, Ling

    2015-06-01

    Coupled with intricate regional interactions, the provincial disparity of energy-resource endowment and other economic conditions in China have created spatially complex energy consumption patterns that require analyses beyond the traditional ones. To distill the spatial effect out of the resource and economic factors on China's energy consumption, this study recast the traditional econometric model in a spatial context. Several analytic steps were taken to reveal different aspects of the issue. Per capita energy consumption (AVEC) at the provincial level was first mapped to reveal spatial clusters of high energy consumption being located in either well developed or energy resourceful regions. This visual spatial autocorrelation pattern of AVEC was quantitatively tested to confirm its existence among Chinese provinces. A Moran scatterplot was employed to further display a relatively centralized trend occurring in those provinces that had parallel AVEC, revealing a spatial structure with attraction among high-high or low-low regions and repellency among high-low or low-high regions. By a comparison between the ordinary least square (OLS) model and its spatial econometric counterparts, a spatial error model (SEM) was selected to analyze the impact of major economic determinants on AVEC. While the analytic results revealed a significant positive correlation between AVEC and economic development, other determinants showed some intricate influential patterns. The provinces endowed with rich energy reserves were inclined to consume much more energy than those otherwise, whereas changing the economic structure by increasing the proportion of secondary and tertiary industries also tended to consume more energy. Both situations seem to underpin the fact that these provinces were largely trapped in the economies that were supported by technologies of low energy efficiency during the period, while other parts of the country were rapidly modernized by adopting advanced

  12. Effect of the section geometry of saucepan base on the energy consumption: an experimental study

    NASA Astrophysics Data System (ADS)

    Ayata, Tahir; Yücel, Yılmaz

    2016-08-01

    In this study, it is aimed to obtain a uniform temperature distribution on the top surface of a circular shaped aluminum saucepan base with rectangular section, while it is heated from the bottom surface by burnt gases. For this purpose, an aluminum saucepan with 10 mm thickness has been manufactured and used in the experiments. Water and oil were used to fill the saucepan during the tests. Tests were conducted at 0.7 and 0.9 m3/h gas flow rates. Firstly, experiments were performed for straight base geometry of the aluminum saucepan and then some modifications have been made in the thickness of the base along the radial direction using the temperature values obtained from the test with normal base. Experiments were repeated with modified base to obtain the new temperature distribution. Final comparison of the modified and unmodified base geometry results revealed that the temperatures obtained at the top surface of the modified base is more uniform than the normal base and the energy consumption decreased by up to 31 %. Thus, comparing both geometry to each other in terms of energy efficiency and consumption, modified based geometry is more promising with its shorter heat up time and lower gas consumption.

  13. NodePM: A Remote Monitoring Alert System for Energy Consumption Using Probabilistic Techniques

    PubMed Central

    Filho, Geraldo P. R.; Ueyama, Jó; Villas, Leandro A.; Pinto, Alex R.; Gonçalves, Vinícius P.; Pessin, Gustavo; Pazzi, Richard W.; Braun, Torsten

    2014-01-01

    In this paper, we propose an intelligent method, named the Novelty Detection Power Meter (NodePM), to detect novelties in electronic equipment monitored by a smart grid. Considering the entropy of each device monitored, which is calculated based on a Markov chain model, the proposed method identifies novelties through a machine learning algorithm. To this end, the NodePM is integrated into a platform for the remote monitoring of energy consumption, which consists of a wireless sensors network (WSN). It thus should be stressed that the experiments were conducted in real environments different from many related works, which are evaluated in simulated environments. In this sense, the results show that the NodePM reduces by 13.7% the power consumption of the equipment we monitored. In addition, the NodePM provides better efficiency to detect novelties when compared to an approach from the literature, surpassing it in different scenarios in all evaluations that were carried out. PMID:24399157

  14. NodePM: a remote monitoring alert system for energy consumption using probabilistic techniques.

    PubMed

    Filho, Geraldo P R; Ueyama, Jó; Villas, Leandro A; Pinto, Alex R; Gonçalves, Vinícius P; Pessin, Gustavo; Pazzi, Richard W; Braun, Torsten

    2014-01-06

    In this paper, we propose an intelligent method, named the Novelty Detection Power Meter (NodePM), to detect novelties in electronic equipment monitored by a smart grid. Considering the entropy of each device monitored, which is calculated based on a Markov chain model, the proposed method identifies novelties through a machine learning algorithm. To this end, the NodePM is integrated into a platform for the remote monitoring of energy consumption, which consists of a wireless sensors network (WSN). It thus should be stressed that the experiments were conducted in real environments different from many related works, which are evaluated in simulated environments. In this sense, the results show that the NodePM reduces by 13.7% the power consumption of the equipment we monitored. In addition, the NodePM provides better efficiency to detect novelties when compared to an approach from the literature, surpassing it in different scenarios in all evaluations that were carried out.

  15. The energy-water nexus: are there tradeoffs between residential energy and water consumption in arid cities?

    PubMed

    Ruddell, Darren M; Dixon, P Grady

    2014-09-01

    Water scarcity, energy consumption, and air temperature regulation are three critical resource and environmental challenges linked to urban population growth. While appliance efficiency continues to increase, today's homes are larger and residents are using more energy-consuming devices. Recent research has often described the energy-water nexus as a "tradeoff" between energy and water due to reduced temperatures resulting from irrigated vegetation. Accordingly, some arid cities have implemented landscape-conversion programs that encourage homeowners to convert their yards from grass (mesic) to drought-tolerant (xeric) landscapes to help conserve water resources. We investigated these relationships in Phoenix, Arizona by examining energy and water data for the summer months of June-September 2005 while temperature variability was analyzed from a local heat wave. Results show parallel consumption patterns with energy and water use strongly correlated and newer homes using more of both. The counterintuitive findings show that "drought-resistant" models may not be beneficial for community health, environment, or economics and that this issue is further complicated by socio-economic variables. PMID:24146303

  16. The energy-water nexus: are there tradeoffs between residential energy and water consumption in arid cities?

    PubMed

    Ruddell, Darren M; Dixon, P Grady

    2014-09-01

    Water scarcity, energy consumption, and air temperature regulation are three critical resource and environmental challenges linked to urban population growth. While appliance efficiency continues to increase, today's homes are larger and residents are using more energy-consuming devices. Recent research has often described the energy-water nexus as a "tradeoff" between energy and water due to reduced temperatures resulting from irrigated vegetation. Accordingly, some arid cities have implemented landscape-conversion programs that encourage homeowners to convert their yards from grass (mesic) to drought-tolerant (xeric) landscapes to help conserve water resources. We investigated these relationships in Phoenix, Arizona by examining energy and water data for the summer months of June-September 2005 while temperature variability was analyzed from a local heat wave. Results show parallel consumption patterns with energy and water use strongly correlated and newer homes using more of both. The counterintuitive findings show that "drought-resistant" models may not be beneficial for community health, environment, or economics and that this issue is further complicated by socio-economic variables.

  17. Consumption of different sources of omega-3 polyunsaturated fatty acids by growing female rats affects long bone mass and microarchitecture.

    PubMed

    Lukas, Robin; Gigliotti, Joseph C; Smith, Brenda J; Altman, Stephanie; Tou, Janet C

    2011-09-01

    Omega-3 polyunsaturated fatty acids (ω-3 PUFAs) consumption has been reported to improve bone health. However, sources of ω-3 PUFAs differ in the type of fatty acids and structural form. The study objective was to determine the effect of various ω-3 PUFAs sources on bone during growth. Young (age 28d) female Sprague-Dawley rats were randomly assigned (n=10/group) to a high fat 12% (wt) diet consisting of either corn oil (CO) or ω-3 PUFA rich, flaxseed (FO), krill (KO), menhaden (MO), salmon (SO) or tuna (TO) for 8 weeks. Bone mass was assessed by dual-energy X-ray absorptiometry (DXA) and bone microarchitecture by micro-computed tomography (μCT). Bone turnover markers were measured by enzyme immunoassay. Lipid peroxidation was measured by calorimetric assays. Results showed that rats fed TO, rich in docosahexaenoic acid (DHA, 22:6ω-3) had higher (P<0.009) tibial bone mineral density (BMD) and bone mineral content (BMC) and lower (P=0.05) lipid peroxidation compared to the CO-fed rats. Reduced lipid peroxidation was associated with increased tibial BMD (r2=0.08, P=0.02) and BMC (r2=0.71, P=0.01). On the other hand, rats fed FO or MO, rich in alpha-linolenic acid (ALA, 18:3ω-3), improved bone microarchitecture compared to rats fed CO or SO. Serum osteocalcin was higher (P=0.03) in rats fed FO compared to rats fed SO. Serum osteocalcin was associated with improved trabecular bone microarchitecture. The animal study results suggest consuming a variety of ω-3 PUFA sources to promote bone health during the growth stage.

  18. Estimation of main greenhouse gases emission from household energy consumption in the West Bank, Palestine.

    PubMed

    Abu-Madi, Maher; Abu Rayyan, Ma'moun

    2013-08-01

    The main GHGs (CO₂, NO(x), and SO₂) have been quantified based on national energy and population statistics. The results show that the contribution of households' energy consumption in the West Bank to global CO₂ emission is about 0.016%, while contribution of total energy consumption by all sectors is about 0.041%. The results show that wood is the most polluting energy source in terms of CO₂ and NO(x) emission, while electricity is the most polluting source in terms of SO₂. Other sources like diesel, kerosene, and LPG that contribute to the GHGs emission are also quantified. The total amounts of CO₂, NO(x), and SO₂ by households in the West Bank are 4.7 million tonne per year, 3.02 thousand tonne per year, and 2.23 thousand tonne per year respectively. This study presents a set of measures that might help in reducing the level of GHGs emission and protect the environment.

  19. Exposure to soda commercials affects sugar-sweetened soda consumption in young women. An observational experimental study.

    PubMed

    Koordeman, Renske; Anschutz, Doeschka J; van Baaren, Rick B; Engels, Rutger C M E

    2010-06-01

    The present study examines the direct effects of television commercials advertising soda on actual sugar-sweetened soda consumption among young women. An experimental-observational study design was used, in which 51 female students (ages 18-29) were exposed to a 35-min movie clip, interrupted by two commercial breaks consisting of soda or water commercials. Their actual soda consumption while watching the movie clip was examined. An analysis of variance was used to examine the effects of commercial condition on soda consumption. Thirst and first glass consumed before the first commercial break were added as covariates in the analyses. Results indicated that participants assigned to the condition with soda commercials consumed 1.3 ounces more soda than participants in the water commercial condition. Exposure to soda commercials while watching a movie can have a strong influence on increasing sugar-sweetened soda consumption in young women.

  20. Estimates of the cost and energy consumption of aluminum-air electric vehicles

    SciTech Connect

    Cooper, J.F.

    1980-11-01

    Economic costs and primary energy consumption are estimated for general purpose electric vehicles using aluminium-air propulsion batteries within the time frame of the 1990's (earliest possible date of introduction). Critical assumptions were: aluminum production at efficiencies at least as high as those of the best currently operating industrial installations; competitive performance automobiles with gasoline or diesel fuel economies at least as high as those of the best currently-available vehicles-13.5 to 19.3 tonne-km/liter (35 to 50 gross ton-miles/gal-fuel); and aluminum-air battery discharge efficiencies at least as high as those obtained with electrodes available prior to the start of the present alloy development program. For an aluminum-air fuel economy of 36 tonne/km/kg-Al (optimized low-gallium alloys), a total refueling cost of 5.6 cents/km (1979$) was estimated for a 1.27 tonne vehicle. This is equivalent to $2 to 3/gal for automobiles of the same weight with fuel economies of 13.5 to 19.3 tonne-km/liter. Critical to the cost estimate is the assumption of anode slab production directly from the product of a reduction cell by low cost casting and shearing operations. The total primary energy consumption was estimated to be 1.3 to 1.7 kWh/km (coal) for the electric vehicle, which corresponds roughly to the energy cost of the automobiles using liquid fuels synthesized from coal. The energy consumption is 30 to 70% greater than the reference automobile using petroleum-derived gasoline. The cost of the battery (including air-electrodes) was estimated to be about $30/kW including 30% markup over producer's cost; or $36/kW, if electrodes are used with 0.25 mg/cm/sup 2/ Pt loadings. (LCL)

  1. Reducing aeration energy consumption in a large-scale membrane bioreactor: Process simulation and engineering application.

    PubMed

    Sun, Jianyu; Liang, Peng; Yan, Xiaoxu; Zuo, Kuichang; Xiao, Kang; Xia, Junlin; Qiu, Yong; Wu, Qing; Wu, Shijia; Huang, Xia; Qi, Meng; Wen, Xianghua

    2016-04-15

    Reducing the energy consumption of membrane bioreactors (MBRs) is highly important for their wider application in wastewater treatment engineering. Of particular significance is reducing aeration in aerobic tanks to reduce the overall energy consumption. This study proposed an in situ ammonia-N-based feedback control strategy for aeration in aerobic tanks; this was tested via model simulation and through a large-scale (50,000 m(3)/d) engineering application. A full-scale MBR model was developed based on the activated sludge model (ASM) and was calibrated to the actual MBR. The aeration control strategy took the form of a two-step cascaded proportion-integration (PI) feedback algorithm. Algorithmic parameters were optimized via model simulation. The strategy achieved real-time adjustment of aeration amounts based on feedback from effluent quality (i.e., ammonia-N). The effectiveness of the strategy was evaluated through both the model platform and the full-scale engineering application. In the former, the aeration flow rate was reduced by 15-20%. In the engineering application, the aeration flow rate was reduced by 20%, and overall specific energy consumption correspondingly reduced by 4% to 0.45 kWh/m(3)-effluent, using the present practice of regulating the angle of guide vanes of fixed-frequency blowers. Potential energy savings are expected to be higher for MBRs with variable-frequency blowers. This study indicated that the ammonia-N-based aeration control strategy holds promise for application in full-scale MBRs.

  2. Hybridization of physical cleaning and quorum quenching to minimize membrane biofouling and energy consumption in a membrane bioreactor.

    PubMed

    Weerasekara, Nuwan A; Choo, Kwang-Ho; Lee, Chung-Hak

    2014-12-15

    Membrane fouling and energy consumption are interconnected and considered as a bottleneck in membrane bioreactor (MBR) applications. This study investigated synergistic combinations of quorum quenching (QQ) and physical cleaning under different cleaning conditions and aeration intensities with respect to fouling control and energy saving. The MBR operated with periodic air backpulsing had a lower fouling tendency compared with the reactor operated with relaxation. Frequent physical cleanings mitigated the membrane fouling, but irreversible fouling inevitably occurred over time. A significant improvement in fouling control was accomplished when QQ was coupled with physical cleanings, particularly in the filtration/relaxation mode. The submerged QQ vessel helped operate the MBRs stably even at the lowest end of aeration intensity (51 s(-1) in G value), without any significant loss of membrane permeability. The specific membrane filtration energy of the QQMBR remained low and independent of aeration intensities tested, whereas that of the normal MBR sharply increased with decreased aeration rates. The QQMBR with low aeration intensity (51 s(-1)) reduced approximately 27% of the specific aeration energy required for the MBR operated at high aeration intensity (103 s(-1)). QQ bacteria should hamper the formation of a biofilm on the membrane surface, but mixed liquor properties and treatment performances were not affected by the QQ activity.

  3. 10 CFR 431.304 - Uniform test method for the measurement of energy consumption of walk-in coolers and walk-in...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... consumption of walk-in coolers and walk-in freezers. 431.304 Section 431.304 Energy DEPARTMENT OF ENERGY... consumption of walk-in coolers and walk-in freezers. (a) Scope. This section provides test procedures for measuring, pursuant to EPCA, the energy consumption of refrigerated bottled or canned beverage...

  4. 10 CFR 431.304 - Uniform test method for the measurement of energy consumption of walk-in coolers and walk-in...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... consumption of walk-in coolers and walk-in freezers. 431.304 Section 431.304 Energy DEPARTMENT OF ENERGY... consumption of walk-in coolers and walk-in freezers. (a) Scope. This section provides test procedures for measuring, pursuant to EPCA, the energy consumption of refrigerated bottled or canned beverage...

  5. Ultrasonic vibration-assisted pelleting of wheat straw: a predictive model for energy consumption using response surface methodology.

    PubMed

    Song, Xiaoxu; Zhang, Meng; Pei, Z J; Wang, Donghai

    2014-01-01

    Cellulosic biomass can be used as a feedstock for biofuel manufacturing. Pelleting of cellulosic biomass can increase its bulk density and thus improve its storability and reduce the feedstock transportation costs. Ultrasonic vibration-assisted (UV-A) pelleting can produce biomass pellets whose density is comparable to that processed by traditional pelleting methods (e.g. extruding, briquetting, and rolling). This study applied response surface methodology to the development of a predictive model for the energy consumption in UV-A pelleting of wheat straw. Effects of pelleting pressure, ultrasonic power, sieve size, and pellet weight were investigated. This study also optimized the process parameters to minimize the energy consumption in UV-A pelleting using response surface methodology. Optimal conditions to minimize the energy consumption were the following: ultrasonic power at 20%, sieve size at 4 mm, and pellet weight at 1g, and the minimum energy consumption was 2.54 Wh. PMID:23859359

  6. A holistic approach for the assessment of the indoor environmental quality, student productivity, and energy consumption in primary schools.

    PubMed

    Dorizas, Paraskevi Vivian; Assimakopoulos, Margarita-Niki; Santamouris, Mattheos

    2015-05-01

    The perception of the indoor environmental quality (IEQ) through questionnaires in conjunction with in-field measurements related to the indoor air quality (IAQ), the thermal comfort and the lighting environment were studied in nine naturally ventilated schools of Athens, Greece. Cluster analysis was carried out in order to determine the ranges of indoor air pollutants, temperature (T), relative humidity (RH), and ventilation rates at which the students were satisfied with the indoor environment. It was found that increased levels of particulate matter did not have a negative effect on students' perception while students seemed to link the degradation of IAQ with temperature variations. Statistically significant correlations were further found between measurement results and students' perception of the IEQ. Students' sick building syndrome (SBS) symptoms and performance of schoolwork were also investigated as a function of the levels of indoor air pollutants and ventilation, and there were found significant positive correlations between particulate matter (PM) and certain health symptoms. Students' learning performance seemed to be affected by the ventilation rates and carbon dioxide (CO₂) concentrations while certain health effects positively correlated to the levels of PM and CO₂. The energy consumption of schools was rather low compared to other national findings, and both the electricity and oil consumption for heating positively correlated to the levels of indoor air pollutants.

  7. Evaluation of the effects of vegetation and green walls on building thermal performance and energy consumption

    NASA Astrophysics Data System (ADS)

    Susorova, Irina

    This research explored the use of vegetation in building facades as a potential solution to the problems of urban ecology and the excessive energy consumption in buildings. Vegetated facades substantially reduce building energy use, reduce the urban heat island effect, improve air quality, and increase the biodiversity of plants and animals in cities. The goal of this research was to evaluate the effects of plants on building thermal performance and energy consumption by developing a thermal model of a building facade covered with a layer of plants. The developed mathematical model accounts for thermal physical processes in a vegetated exterior wall including solar radiation, infrared radiative exchange between the facade and sky, the facade and ground, the facade and vegetation layer, convection to and from the facade, evapotranspiration from the plant layer, heat storage in the facade material, and heat conduction through the facade. The model calculates vegetated facade surface temperature and heat flux through the facade for multiple weather conditions, plant physiological characteristics, and facade parameters inputs. The model was validated with the results of a one-week long experiment measuring the thermal properties of bare and vegetated facades on the Illinois Institute of Technology campus. The experiment and subsequent sensitivity analysis demonstrated that a plant layer can effectively reduce the facade exterior surface temperature, daily temperature fluctuations, exterior wall temperature gradient, and, as a result, provide as much additional thermal insulation to the facade as a 2.5 cm layer of expanded polystyrene insulation. The vegetated facade model was also used to analyze the reduction in energy consumption in generic office and residential thermal zones for multiple parameters. The simulations showed that energy reduction could be as high as 6.2% of annual total energy use and 34.6% of cooling energy use in residential thermal zones. Overall

  8. Analysis of energy-related CO2 emissions and driving factors in five major energy consumption sectors in China.

    PubMed

    Cui, Erqian; Ren, Lijun; Sun, Haoyu

    2016-10-01

    Continual growth of energy-related CO2 emissions in China has received great attention, both domestically and internationally. In this paper, we evaluated the CO2 emissions in five major energy consumption sectors which were evaluated from 1991 to 2012. In order to analyze the driving factors of CO2 emission change in different sectors, the Kaya identity was extended by adding several variables based on specific industrial characteristics and a decomposition analysis model was established according to the LMDI method. The results demonstrated that economic factor was the leading force explaining emission increase in each sector while energy intensity and sector contribution were major contributors to emission mitigation. Meanwhile, CO2 emission intensity had no significant influence on CO2 emission in the short term, and energy consumption structure had a small but growing negative impact on the increase of CO2 emissions. In addition, the future CO2 emissions of industry from 2013 to 2020 under three scenarios were estimated, and the reduction potential of CO2 emissions in industry are 335 Mt in 2020 under lower-emission scenario while the CO2 emission difference between higher-emission scenario and lower-emission scenario is nearly 725 Mt. This paper can offer complementary perspectives on determinants of energy-related CO2 emission change in different sectors and help to formulate mitigation strategies for CO2 emissions.

  9. Analysis of energy-related CO2 emissions and driving factors in five major energy consumption sectors in China.

    PubMed

    Cui, Erqian; Ren, Lijun; Sun, Haoyu

    2016-10-01

    Continual growth of energy-related CO2 emissions in China has received great attention, both domestically and internationally. In this paper, we evaluated the CO2 emissions in five major energy consumption sectors which were evaluated from 1991 to 2012. In order to analyze the driving factors of CO2 emission change in different sectors, the Kaya identity was extended by adding several variables based on specific industrial characteristics and a decomposition analysis model was established according to the LMDI method. The results demonstrated that economic factor was the leading force explaining emission increase in each sector while energy intensity and sector contribution were major contributors to emission mitigation. Meanwhile, CO2 emission intensity had no significant influence on CO2 emission in the short term, and energy consumption structure had a small but growing negative impact on the increase of CO2 emissions. In addition, the future CO2 emissions of industry from 2013 to 2020 under three scenarios were estimated, and the reduction potential of CO2 emissions in industry are 335 Mt in 2020 under lower-emission scenario while the CO2 emission difference between higher-emission scenario and lower-emission scenario is nearly 725 Mt. This paper can offer complementary perspectives on determinants of energy-related CO2 emission change in different sectors and help to formulate mitigation strategies for CO2 emissions. PMID:27397029

  10. Organic core-sheath nanowire artificial synapses with femtojoule energy consumption.

    PubMed

    Xu, Wentao; Min, Sung-Yong; Hwang, Hyunsang; Lee, Tae-Woo

    2016-06-01

    Emulation of biological synapses is an important step toward construction of large-scale brain-inspired electronics. Despite remarkable progress in emulating synaptic functions, current synaptic devices still consume energy that is orders of magnitude greater than do biological synapses (~10 fJ per synaptic event). Reduction of energy consumption of artificial synapses remains a difficult challenge. We report organic nanowire (ONW) synaptic transistors (STs) that emulate the important working principles of a biological synapse. The ONWs emulate the morphology of nerve fibers. With a core-sheath-structured ONW active channel and a well-confined 300-nm channel length obtained using ONW lithography, ~1.23 fJ per synaptic event for individual ONW was attained, which rivals that of biological synapses. The ONW STs provide a significant step toward realizing low-energy-consuming artificial intelligent electronics and open new approaches to assembling soft neuromorphic systems with nanometer feature size. PMID:27386556

  11. Cost and energy consumption estimates for the aluminum-air battery anode fuel cycle

    NASA Astrophysics Data System (ADS)

    1990-01-01

    At the request of DOE's Office of Energy Storage and Distribution (OESD), Pacific Northwest Laboratory (PNL) conducted a study to generate estimates of the energy use and costs associated with the aluminum anode fuel cycle of the aluminum-air (Al-air) battery. The results of this analysis indicate that the cost and energy consumption characteristics of the mechanically rechargeable Al-air battery system are not as attractive as some other electrically rechargeable electric vehicle battery systems being developed by OESD. However, there are distinct advantages to mechanically rechargeable batteries, which may make the Al-air battery (or other mechanically rechargeable batteries) attractive for other uses, such as stand-alone applications. Fuel cells, such as the proton exchange membrane (PEM), and advanced secondary batteries may be better suited to electric vehicle applications.

  12. Cost and energy consumption estimates for the aluminum-air battery anode fuel cycle

    SciTech Connect

    Humphreys, K.K.; Brown, D.R.

    1990-01-01

    At the request of DOE's Office of Energy Storage and Distribution (OESD), Pacific Northwest Laboratory (PNL) conducted a study to generate estimates of the energy use and costs associated with the aluminum anode fuel cycle of the aluminum-air (Al-air) battery. The results of this analysis indicate that the cost and energy consumption characteristics of the mechanically rechargeable Al-air battery system are not as attractive as some other electrically rechargeable electric vehicle battery systems being developed by OESD. However, there are distinct advantages to mechanically rechargeable batteries, which may make the Al-air battery (or other mechanically rechargeable batteries) attractive for other uses, such as stand-alone applications. Fuel cells, such as the proton exchange membrane (PEM), and advanced secondary batteries may be better suited to electric vehicle applications. 26 refs., 3 figs., 25 tabs.

  13. Energy Consumption in Copper Smelting: A New Asian Horse in the Race

    NASA Astrophysics Data System (ADS)

    Coursol, P.; Mackey, P. J.; Kapusta, J. P. T.; Valencia, N. Cardona

    2015-05-01

    After a marked improvement in energy consumption in copper smelting during the past few decades, technology development has been slowing down in the Americas and in Europe. Innovation, however, is still required to further reduce energy consumption while complying with stringent environmental regulations. The bottom blowing smelting technology being developed in China shows success and promise. The general configuration of the bath smelting vessel, the design of high-pressure injectors, and the concentrate addition system are described and discussed in this article with respect to those used in other technologies. The bottom blowing technology is shown to be operating at a temperature in the range of 1160-1180°C, which is the lowest reported temperature range for a modern copper smelting process. In this article, it is suggested that top feeding of filter cake concentrate, which is also used in other technologies, has a positive effect in reducing the oxidation potential of the slag ( p(O2)) while increasing the FeS solubility in slag. This reduction in p(O2) lowers the magnetite liquidus of the slag, while the increased solubility of FeS in slag helps toward reaching very low copper levels in flotation slag tailings. The application of high-pressure injectors allows for the use of high levels of oxygen enrichment with no requirements for punching. Using a standard modeling approach from the authors' previous studies, this article discusses these aspects and compares the energy consumption of the bottom blowing technology with that of other leading flash and bath smelting technologies, namely: flash smelting, Noranda/Teniente Converter, TSL (Isasmelt [Glencore Technology Pty. Ltd., Brisbane, Queensland, Australia]/Outotec), and the Mitsubishi Process (Mitsubishi Materials Corporation, Tokyo, Japan).

  14. Milk consumption following exercise reduces subsequent energy intake in female recreational exercisers.

    PubMed

    Rumbold, Penny; Shaw, Emily; James, Lewis; Stevenson, Emma

    2015-01-01

    The aim of this study was to evaluate the effects of skimmed milk as a recovery drink following moderate-vigorous cycling exercise on subsequent appetite and energy intake in healthy, female recreational exercisers. Utilising a randomised cross-over design, nine female recreational exercisers (19.7 ± 1.3 years) completed a V̇O2peak test followed by two main exercise trials. The main trials were conducted following a standardised breakfast. Following 30 min of moderate-vigorous exercise (65% V̇O2peak), either 600 mL of skimmed milk or 600 mL of orange drink (475 mL orange juice from concentrate, 125 mL water), which were isoenergetic (0.88 MJ), were ingested, followed 60 min later with an ad libitum pasta meal. Absolute energy intake was reduced 25.2% ± 16.6% after consuming milk compared to the orange drink (2.39 ± 0.70 vs. 3.20 ± 0.84 MJ, respectively; p = 0.001). Relative energy intake (in relation to the energy content of the recovery drinks and energy expenditure) was significantly lower after milk consumption compared to the orange drink (1.49 ± 0.72 vs. 2.33 ± 0.90 MJ, respectively; p = 0.005). There were no differences in AUC (× 1 h) subjective appetite parameters (hunger, fullness and desire to eat) between trials. The consumption of skimmed milk following 30 min of moderate-vigorous cycling exercise reduces subsequent energy intake in female recreational exercisers.

  15. Energy consumption and exhaust emissions in mechanized timber harvesting operations in Sweden.

    PubMed

    Athanassiadis, D

    2000-06-01

    The study presents an estimation of the energy input and the amount of emissions to air due to fuel, chainsaw and hydraulic oil consumption by heavy duty diesel engine vehicles operating in forest logging operations in Sweden. Exhaust concentrations are given for carbon dioxide, carbon monoxide, nitrogen oxides, hydrocarbons and particulate matter. Three fuel types (rapeseed methyl ester, environmental class 1 and environmental class 3 diesel fuels) and two types of lubricating base oil (mineral- and vegetable-based) were examined. Energy input per unit of timber production (m3ub) was 82 MJ, 11% of which was due to energy consumption during the production phase of the fuel. Emissions during the whole life cycle of the fuels and the base oils are included in the study. The highest CO2 and NOx emissions occurred when rapeseed methyl ester was used as fuel together with rapeseed as base oil for chainsaw and hydraulic oil. The highest HC and CO emissions occurred when environmental class 3 diesel fuel was used.

  16. Energy Consumption and Control Response Evaluations of AODV Routing in WSANs for Building-Temperature Control

    PubMed Central

    Booranawong, Apidet; Teerapabkajorndet, Wiklom; Limsakul, Chusak

    2013-01-01

    The main objective of this paper is to investigate the effects of routing protocols on wireless sensor and actuator networks (WSANs), focusing on the control system response and the energy consumption of nodes in a network. We demonstrate that routing algorithms designed without considering the relationship between communication and control cannot be appropriately used in wireless networked control applications. For this purpose, an ad-hoc on-demand distance vector (AODV) routing, an IEEE 802.15.4, and a building-temperature control system are employed for this exploration. The findings from our scenarios show that the AODV routing can select a path with a high traffic load for data transmission. It takes a long time before deciding to change a new route although it experiences the unsuccessful transmission of packets. As a result, the desirable control target cannot be achieved in time, and nodes consume more energy due to frequent packet collisions and retransmissions. Consequently, we propose a simple routing solution to alleviate these research problems by modifying the original AODV routing protocol. The delay-threshold is considered to avoid any congested connection during routing procedures. The simulation results demonstrate that our solution can be appropriately applied in WSANs. Both the energy consumption and the control system response are improved. PMID:23807689

  17. Life cycle inventory energy consumption and emissions for biodiesel versus petroleum diesel fueled construction vehicles.

    PubMed

    Pang, Shih-Hao; Frey, H Christopher; Rasdorf, William J

    2009-08-15

    Substitution of soy-based biodiesel fuels for petroleum diesel will alter life cycle emissions for construction vehicles. A life cycle inventory was used to estimate fuel cycle energy consumption and emissions of selected pollutants and greenhouse gases. Real-world measurements using a portable emission measurement system (PEMS) were made forfive backhoes, four front-end loaders, and six motor graders on both fuels from which fuel consumption and tailpipe emission factors of CO, HC, NO(x), and PM were estimated. Life cycle fossil energy reductions are estimated it 9% for B20 and 42% for B100 versus petroleum diesel based on the current national energy mix. Fuel cycle emissions will contribute a larger share of total life cycle emissions as new engines enter the in-use fleet. The average differences in life cycle emissions for B20 versus diesel are: 3.5% higher for NO(x); 11.8% lower for PM, 1.6% higher for HC, and 4.1% lower for CO. Local urban tailpipe emissions are estimated to be 24% lower for HC, 20% lower for CO, 17% lower for PM, and 0.9% lower for NO(x). Thus, there are environmental trade-offs such as for rural vs urban areas. The key sources of uncertainty in the B20 LCI are vehicle emission factors.

  18. Estimation of optimum requirements for indoor air quality and energy consumption in some residences in Kuwait.

    PubMed

    Elkilani, A; Bouhamra, W

    2001-12-01

    Contrasting effects of the dilution of indoor generated pollutants and the energy efficiency of heating and ventilating air conditioning systems (HVAC) for indoor air quality (IAQ) and thermal comfort were studied for 10 Kuwaiti residences. The levels of volatile organic compounds (VOCs) and the calculated cooling load of the HVAC systems were used as indicators for the IAQ and for the energy consumption, respectively. Air exchange rates and VOCs levels (both indoor and outdoor) were measured. It was found that the outdoor VOC concentrations were always less than the indoor values. Therefore reduction of indoor VOC levels can be accomplished either by increasing the ratio of the makeup air to the recirculation air of the HVAC system or by increasing the infiltration airflow rate through openings. A single compartment IAQ model, modified by the authors, was used to test for the variation in the above two dilution modes and to test the performance sensitivity. Hence, the optimum parameters in terms of IAQ and energy consumption were determined. The results indicated that it was necessary to increase the ratio of the makeup air to the recirculation air from its typical design value of 0.5 to a range of 0.7-1.3 in order to reduce indoor VOC to acceptable levels.

  19. Energy consumption and control response evaluations of AODV routing in WSANs for building-temperature control.

    PubMed

    Booranawong, Apidet; Teerapabkajorndet, Wiklom; Limsakul, Chusak

    2013-06-27

    The main objective of this paper is to investigate the effects of routing protocols on wireless sensor and actuator networks (WSANs), focusing on the control system response and the energy consumption of nodes in a network. We demonstrate that routing algorithms designed without considering the relationship between communication and control cannot be appropriately used in wireless networked control applications. For this purpose, an ad-hoc on-demand distance vector (AODV) routing, an IEEE 802.15.4, and a building-temperature control system are employed for this exploration. The findings from our scenarios show that the AODV routing can select a path with a high traffic load for data transmission. It takes a long time before deciding to change a new route although it experiences the unsuccessful transmission of packets. As a result, the desirable control target cannot be achieved in time, and nodes consume more energy due to frequent packet collisions and retransmissions. Consequently, we propose a simple routing solution to alleviate these research problems by modifying the original AODV routing protocol. The delay-threshold is considered to avoid any congested connection during routing procedures. The simulation results demonstrate that our solution can be appropriately applied in WSANs. Both the energy consumption and the control system response are improved.

  20. Plain Water and Sugar-Sweetened Beverage Consumption in Relation to Energy and Nutrient Intake at Full-Service Restaurants

    PubMed Central

    An, Ruopeng

    2016-01-01

    Background: Drinking plain water, such as tap or bottled water, provides hydration and satiety without adding calories. We examined plain water and sugar-sweetened beverage (SSB) consumption in relation to energy and nutrient intake at full-service restaurants. Methods: Data came from the 2005–2012 National Health and Nutrition Examination Survey, comprising a nationally-representative sample of 2900 adults who reported full-service restaurant consumption in 24-h dietary recalls. Linear regressions were performed to examine the differences in daily energy and nutrient intake at full-service restaurants by plain water and SSB consumption status, adjusting for individual characteristics and sampling design. Results: Over 18% of U.S. adults had full-service restaurant consumption on any given day. Among full-service restaurant consumers, 16.7% consumed SSBs, 2.6% consumed plain water but no SSBs, and the remaining 80.7% consumed neither beverage at the restaurant. Compared to onsite SSB consumption, plain water but no SSB consumption was associated with reduced daily total energy intake at full-service restaurants by 443.4 kcal, added sugar intake by 58.2 g, saturated fat intake by 4.4 g, and sodium intake by 616.8 mg, respectively. Conclusion: Replacing SSBs with plain water consumption could be an effective strategy to balance energy/nutrient intake and prevent overconsumption at full-service restaurant setting. PMID:27153083

  1. CFD investigation of the influence of low emissivity coatings to reduce domestic energy consumption

    NASA Astrophysics Data System (ADS)

    Buckingham, S.; Goffaux, C.; Jacquet, D.; Geron, L.

    2012-11-01

    The opportunity to perform energy savings at a kitchen room scale was numerically explored by applying low emissivity coatings to internal surfaces of walls and external casings of appliances. The study focuses on the radiator's heating consumption necessary to maintain the desired comfort temperature. The objective is to provide reliable scientific proof of the added value of low emissivity coatings by performing CFD (Computational Fluid Dynamics) simulations. Based on this domestic cavity model and a gray-body approach, a parametric study was performed covering a wide range of surface emissivity combinations, in winter weather conditions. The risk of overheating is also analyzed in summer weather conditions.

  2. NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

    NASA Technical Reports Server (NTRS)

    Hathaway, Michael D.; DelRasario, Ruben; Madavan, Nateri K.

    2013-01-01

    This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 % relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030-2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

  3. NASA Fixed Wing Project Propulsion Research and Technology Development Activities to Reduce Thrust Specific Energy Consumption

    NASA Technical Reports Server (NTRS)

    Hathaway, Michael D.; Rosario, Ruben Del; Madavan, Nateri K.

    2013-01-01

    This paper presents an overview of the propulsion research and technology portfolio of NASA Fundamental Aeronautics Program Fixed Wing Project. The research is aimed at significantly reducing the thrust specific fuel/energy consumption of notional advanced fixed wing aircraft (by 60 percent relative to a baseline Boeing 737-800 aircraft with CFM56-7B engines) in the 2030 to 2035 time frame. The research investments described herein are aimed at improving propulsive efficiency through higher bypass ratio fans, improving thermal efficiency through compact high overall pressure ratio gas generators, and exploring the potential benefits of boundary layer ingestion propulsion and hybrid gas-electric propulsion concepts.

  4. Optimization problems for WSNs: trade-off between synchronization errors and energy consumption

    NASA Astrophysics Data System (ADS)

    Manita, Larisa

    2016-02-01

    We discuss a class of optimization problems related to stochastic models of wireless sensor networks (WSNs). We consider a sensor network that consists of a single server node and m groups of identical client nodes. The goal is to minimize the cost functional which accumulates synchronization errors and energy consumption over a given time interval. The control function u(t) = (u1(t),...,um(t)) corresponds to the power of the server node transmitting synchronization signals to the groups of clients. We find the structure of extremal trajectories. We show that optimal solutions for such models can contain singular arcs.

  5. How Growing Complexity of Consumer Choices and Drivers of Consumption Behaviour Affect Demand for Animal Source Foods.

    PubMed

    Perry, B D; Grace, D C

    2015-12-01

    Many societies are spoiled for choice when they purchase meat and other livestock products, and around the globe food choice has grown dramatically in the last two decades. What is more, besides the cost and obvious health concerns influencing commodity section, an increasing proportion of choices is made to contribute to the achievement of certain ideals, such as natural resource management, climate change mitigation, animal welfare concerns and personal lifestyle. At the same time, human health considerations are becoming more important for consumption choices as richer societies, and increasingly the urban poor in low- and middle-income countries, face an unprecedented epidemic of over-consumption and associated diet-related non-communicable diseases. Animal source foods are considered significant contributors to this trend. This paper reviews this complicated arena, and explores the range of considerations that influence consumers' preferences for meat and other animal source foods. This paper also argues that deeper drivers of consumption behaviour of many foods may act in opposition to the articulated preferences for choices around animal source food consumption. We review how the returns to different causes are being valued, how emerging metrics are helping to manage and influence consumption behaviours, and draw conclusions regarding options which influence food choice. PMID:26682899

  6. How Growing Complexity of Consumer Choices and Drivers of Consumption Behaviour Affect Demand for Animal Source Foods.

    PubMed

    Perry, B D; Grace, D C

    2015-12-01

    Many societies are spoiled for choice when they purchase meat and other livestock products, and around the globe food choice has grown dramatically in the last two decades. What is more, besides the cost and obvious health concerns influencing commodity section, an increasing proportion of choices is made to contribute to the achievement of certain ideals, such as natural resource management, climate change mitigation, animal welfare concerns and personal lifestyle. At the same time, human health considerations are becoming more important for consumption choices as richer societies, and increasingly the urban poor in low- and middle-income countries, face an unprecedented epidemic of over-consumption and associated diet-related non-communicable diseases. Animal source foods are considered significant contributors to this trend. This paper reviews this complicated arena, and explores the range of considerations that influence consumers' preferences for meat and other animal source foods. This paper also argues that deeper drivers of consumption behaviour of many foods may act in opposition to the articulated preferences for choices around animal source food consumption. We review how the returns to different causes are being valued, how emerging metrics are helping to manage and influence consumption behaviours, and draw conclusions regarding options which influence food choice.

  7. The impact of advanced wastewater treatment technologies and wastewater strength on the energy consumption of large wastewater treatment plants

    NASA Astrophysics Data System (ADS)

    Newell, Timothy

    Wastewater treatment is an energy intensive process often requiring the use of advanced treatment technologies. Stricter effluent standards have resulted in an increase in the number of wastewater treatment plants (WWTPs) with advanced treatment over time. Accordingly, associated energy consumption has also increased. Concerns about lowering operating costs for WWTPs and reducing associated greenhouse gas generation present an incentive to investigate energy use in WWTPs. This research investigated the impact of wastewater strength and the introduction of advanced treatment technologies, to replace traditional technologies on energy use to treat wastewater in WWTPs. Major unit processes were designed for a 100 MGD plant and variables controlling energy were identified and used to compute energy consumption. Except for primary clarification and plate and frame press dewatering, energy consumption computed using fundamental equations are within values in the literature. Results show that energy consumption for dissolved air flotation thickeners, centrifuges, gravity thickeners, and aeration basins are heavily influence by wastewater strength. Secondary treatment and tertiary treatment require a significant amount of energy. Secondary treatment requires 104 times the energy of preliminary treatment, 17 times the energy of solids processing, and 2.5 times the energy of tertiary treatment. Secondary treatment requires 41 times the energy of preliminary treatment, and 7 times the energy of solids processing. The results of this research provide a means of estimating energy consumption in the design and operation phase of a WWTP. By using the fundamental equations and methodology presented, alternative technologies can be compared or targeted for future energy savings implementation. Limitations of the methodology include design assumptions having to be made carefully, as well as assumptions of motor and equipment efficiencies.

  8. Reductions in greenhouse gas (GHG) generation and energy consumption in wastewater treatment plants.

    PubMed

    Yerushalmi, L; Ashrafi, O; Haghighat, F

    2013-01-01

    Greenhouse gas (GHG) emission and energy consumption by on-site and off-site sources were estimated in two different wastewater treatment plants that used physical-chemical or biological processes for the removal of contaminants, and an anaerobic digester for sludge treatment. Physical-chemical treatment processes were used in the treatment plant of a locomotive repair factory that processed wastewater at 842 kg chemical oxygen demand per day. Approximately 80% of the total GHG emission was related to fossil fuel consumption for energy production. The emission of GHG was reduced by 14.5% with the recovery of biogas that was generated in the anaerobic digester and its further use as an energy source, replacing fossil fuels. The examined biological treatment system used three alternative process designs for the treatment of effluents from pulp and paper mills that processed wastewater at 2,000 kg biochemical oxygen demand per day. The three designs used aerobic, anaerobic, or hybrid aerobic/anaerobic biological processes for the removal of carbonaceous contaminants, and nitrification/denitrification processes for nitrogen removal. Without the recovery and use of biogas, the aerobic, anaerobic, and hybrid treatment systems generated 3,346, 6,554 and 7,056 kg CO(2)-equivalent/day, respectively, while the generated GHG was reduced to 3,152, 6,051, and 6,541 kg CO(2)-equivalent/day with biogas recovery. The recovery and use of biogas was shown to satisfy and exceed the energy needs of the three examined treatment plants. The reduction of operating temperature of the anaerobic digester and anaerobic reactor by 10°C reduced energy demands of the treatment plants by 35.1, 70.6 and 62.9% in the three examined treatment systems, respectively.

  9. Power-law relationships for estimating mass, fuel consumption and costs of energy conversion equipments.

    PubMed

    Caduff, Marloes; Huijbregts, Mark A J; Althaus, Hans-Joerg; Hendriks, A Jan

    2011-01-15

    To perform life-cycle assessment studies, data on the production and use of the products is required. However, often only few data or measurements are available. Estimation of properties can be performed by applying scaling relationships. In many disciplines, they are used to either predict data or to search for underlying patterns, but they have not been considered in the context of product assessments hitherto. The goal of this study was to explore size scaling for commonly used energy conversion equipment, that is, boilers, engines, and generators. The variables mass M, fuel consumption Q, and costs C were related to power P. The established power-law relationships were M = 10(0.73.. 1.89)P(0.64.. 1.23) (R(2) ≥ 0.94), Q = 10(0.06.. 0.68)P(0.82.. 1.02) (R(2) ≥ 0.98) and C = 10(2.46.. 2.86)P(0.83.. 0.85) (R(2) ≥ 0.83). Mass versus power and costs versus power showed that none of the equipment types scaled isometrically, that is, with a slope of 1. Fuel consumption versus power scaled approximately isometrically for steam boilers, the other equipments scaled significantly lower than 1. This nonlinear scaling behavior induces a significant size effect. The power laws we established can be applied to scale the mass, fuel consumption and costs of energy conversion equipments up or down. Our findings suggest that empirical scaling laws can be used to estimate properties, particularly relevant in studies focusing on early product development for which generally only little information is available. PMID:21133374

  10. Power-law relationships for estimating mass, fuel consumption and costs of energy conversion equipments.

    PubMed

    Caduff, Marloes; Huijbregts, Mark A J; Althaus, Hans-Joerg; Hendriks, A Jan

    2011-01-15

    To perform life-cycle assessment studies, data on the production and use of the products is required. However, often only few data or measurements are available. Estimation of properties can be performed by applying scaling relationships. In many disciplines, they are used to either predict data or to search for underlying patterns, but they have not been considered in the context of product assessments hitherto. The goal of this study was to explore size scaling for commonly used energy conversion equipment, that is, boilers, engines, and generators. The variables mass M, fuel consumption Q, and costs C were related to power P. The established power-law relationships were M = 10(0.73.. 1.89)P(0.64.. 1.23) (R(2) ≥ 0.94), Q = 10(0.06.. 0.68)P(0.82.. 1.02) (R(2) ≥ 0.98) and C = 10(2.46.. 2.86)P(0.83.. 0.85) (R(2) ≥ 0.83). Mass versus power and costs versus power showed that none of the equipment types scaled isometrically, that is, with a slope of 1. Fuel consumption versus power scaled approximately isometrically for steam boilers, the other equipments scaled significantly lower than 1. This nonlinear scaling behavior induces a significant size effect. The power laws we established can be applied to scale the mass, fuel consumption and costs of energy conversion equipments up or down. Our findings suggest that empirical scaling laws can be used to estimate properties, particularly relevant in studies focusing on early product development for which generally only little information is available.

  11. Preprandial ghrelin is not affected by macronutrient intake, energy intake or energy expenditure

    PubMed Central

    Paul, David R; Kramer, Matthew; Rhodes, Donna G; Rumpler, William V

    2005-01-01

    Background Ghrelin, a peptide secreted by endocrine cells in the gastrointestinal tract, is a hormone purported to have a significant effect on food intake and energy balance in humans. The influence of factors related to energy balance on ghrelin, such as daily energy expenditure, energy intake, and macronutrient intake, have not been reported. Secondly, the effect of ghrelin on food intake has not been quantified under free-living conditions over a prolonged period of time. To investigate these effects, 12 men were provided with an ad libitum cafeteria-style diet for 16 weeks. The macronutrient composition of the diets were covertly modified with drinks containing 2.1 MJ of predominantly carbohydrate (Hi-CHO), protein (Hi-PRO), or fat (Hi-FAT). Total energy expenditure was measured for seven days on two separate occasions (doubly labeled water and physical activity logs). Results Preprandial ghrelin concentrations were not affected by macronutrient intake, energy expenditure or energy intake (all P > 0.05). In turn, daily energy intake was significantly influenced by energy expenditure, but not ghrelin. Conclusion Preprandial ghrelin does not appear to be influenced by macronutrient composition, energy intake, or energy expenditure. Similarly, ghrelin does not appear to affect acute or chronic energy intake under free-living conditions. PMID:15745452

  12. Life comparative analysis of energy consumption and CO₂ emissions of different building structural frame types.

    PubMed

    Kim, Sangyong; Moon, Joon-Ho; Shin, Yoonseok; Kim, Gwang-Hee; Seo, Deok-Seok

    2013-01-01

    The objective of this research is to quantitatively measure and compare the environmental load and construction cost of different structural frame types. Construction cost also accounts for the costs of CO₂ emissions of input materials. The choice of structural frame type is a major consideration in construction, as this element represents about 33% of total building construction costs. In this research, four constructed buildings were analyzed, with these having either reinforced concrete (RC) or steel (S) structures. An input-output framework analysis was used to measure energy consumption and CO₂ emissions of input materials for each structural frame type. In addition, the CO₂ emissions cost was measured using the trading price of CO₂ emissions on the International Commodity Exchange. This research revealed that both energy consumption and CO₂ emissions were, on average, 26% lower with the RC structure than with the S structure, and the construction costs (including the CO₂ emissions cost) of the RC structure were about 9.8% lower, compared to the S structure. This research provides insights through which the construction industry will be able to respond to the carbon market, which is expected to continue to grow in the future.

  13. Energy Consumption Forecasting Using Semantic-Based Genetic Programming with Local Search Optimizer.

    PubMed

    Castelli, Mauro; Trujillo, Leonardo; Vanneschi, Leonardo

    2015-01-01

    Energy consumption forecasting (ECF) is an important policy issue in today's economies. An accurate ECF has great benefits for electric utilities and both negative and positive errors lead to increased operating costs. The paper proposes a semantic based genetic programming framework to address the ECF problem. In particular, we propose a system that finds (quasi-)perfect solutions with high probability and that generates models able to produce near optimal predictions also on unseen data. The framework blends a recently developed version of genetic programming that integrates semantic genetic operators with a local search method. The main idea in combining semantic genetic programming and a local searcher is to couple the exploration ability of the former with the exploitation ability of the latter. Experimental results confirm the suitability of the proposed method in predicting the energy consumption. In particular, the system produces a lower error with respect to the existing state-of-the art techniques used on the same dataset. More importantly, this case study has shown that including a local searcher in the geometric semantic genetic programming system can speed up the search process and can result in fitter models that are able to produce an accurate forecasting also on unseen data.

  14. Energy Consumption Forecasting Using Semantic-Based Genetic Programming with Local Search Optimizer

    PubMed Central

    Vanneschi, Leonardo

    2015-01-01

    Energy consumption forecasting (ECF) is an important policy issue in today's economies. An accurate ECF has great benefits for electric utilities and both negative and positive errors lead to increased operating costs. The paper proposes a semantic based genetic programming framework to address the ECF problem. In particular, we propose a system that finds (quasi-)perfect solutions with high probability and that generates models able to produce near optimal predictions also on unseen data. The framework blends a recently developed version of genetic programming that integrates semantic genetic operators with a local search method. The main idea in combining semantic genetic programming and a local searcher is to couple the exploration ability of the former with the exploitation ability of the latter. Experimental results confirm the suitability of the proposed method in predicting the energy consumption. In particular, the system produces a lower error with respect to the existing state-of-the art techniques used on the same dataset. More importantly, this case study has shown that including a local searcher in the geometric semantic genetic programming system can speed up the search process and can result in fitter models that are able to produce an accurate forecasting also on unseen data. PMID:26106410

  15. Hsp70 chaperones are non-equilibrium machines that achieve ultra-affinity by energy consumption.

    PubMed

    De Los Rios, Paolo; Barducci, Alessandro

    2014-05-27

    70-kDa Heat shock proteins are ATP-driven molecular chaperones that perform a myriad of essential cellular tasks. Although structural and biochemical studies have shed some light on their functional mechanism, the fundamental issue of the role of energy consumption, due to ATP-hydrolysis, has remained unaddressed. Here we establish a clear connection between the non-equilibrium nature of Hsp70, due to ATP hydrolysis, and the determining feature of its function, namely its high affinity for its substrates. Energy consumption can indeed decrease the dissociation constant of the chaperone-substrate complex by several orders of magnitude with respect to an equilibrium scenario. We find that the biochemical requirements for observing such ultra-affinity coincide with the physiological conditions in the cell. Our results rationalize several experimental observations and pave the way for further analysis of non-equilibrium effects underlying chaperone functions.DOI: http://dx.doi.org/10.7554/eLife.02218.001.

  16. Mechanisms affecting kinetic energies of laser-ablated materials

    SciTech Connect

    Chen, K.R. |; Leboeuf, J.N.; Wood, R.F.; Geohegan, D.B.; Donato, J.M.; Liu, C.L.; Puretzky, A.A.

    1995-12-31

    Laser materials processing techniques are expected to have a dramatic impact on materials science and engineering in the near future and beyond. One of the main laser materials processing techniques is Pulsed Laser Deposition (PLD) for thin film growth. While experimentalists search for optimal approaches for thin film growth with pulsed laser deposition (PLD), a systematic effort in theory and modeling of various processes during PLD is needed. The quality of film deposited depends critically on the range and profile of the kinetic energy and density of the ablated plume. While it is to the advantage of pulsed laser deposition to have high kinetic energy, plumes that are too energetic causes film damage. A dynamic source effect was found to accelerate the plume expansion velocity much higher than that from a conventional free expansion model. A self-similar theory and a hydrodynamic model are developed to study this effect, which may help to explain experimentally observed high front expansion velocity. Background gas can also affect the kinetic energies. High background gas may cause the ablated materials to go backward. Experimentally observed plume splitting is also discussed.

  17. Respiratory symptoms increase health care consumption and affect everyday life – a cross-sectional population-based study from Finland, Estonia, and Sweden

    PubMed Central

    Axelsson, Malin; Lindberg, Anne; Kainu, Annette; Rönmark, Eva; Jansson, Sven-Arne

    2016-01-01

    Background Even though respiratory symptoms are common in the adult population, there is limited research describing their impact on everyday life and association with health care consumption. Aim The main objective of this population-based study was to estimate and compare the prevalence of respiratory symptoms among adults in Finland, Estonia, and Sweden in relation to health care consumption and to identify factors influencing health care consumption. A secondary aim was to assess to which extent the presence of respiratory symptoms affect everyday life. Method In the population-based FinEsS studies consisting of random samples of subjects aged 20 to 69 years from Finland (n=1,337), Estonia (n=1,346), and Sweden (n=1,953), data on demographics, respiratory health, and health care consumption were collected by structured interviews. Prevalence was compared and multiple logistic regression analyses were performed. Results Respiratory symptoms were significantly more common in Finland (66.0%) and Estonia (65.2%) than in Sweden (54.1%). Among subjects with respiratory symptoms, the proportion reporting outpatient care during the past year was fairly similar in the three countries, while specialist consultations were more common in Finland (19.1%), and hospitalisations more common in Estonia (15.0%). Finnish and Estonian residency, female sex, and BMI>25 increased the risk for outpatient care consumption. Wheeze and attacks of shortness of breath in the past 12 months, recurrent sputum production, and cough were associated with an increased risk for health care consumption. Increasing number of respiratory symptoms increased the risk for consuming health care. A larger proportion of subjects in Estonia and Sweden experienced their everyday life being affected by respiratory symptoms compared with subjects in Finland. Conclusion Respiratory symptoms are common in Finland, Estonia, and Sweden and contribute to a negative impact on everyday life as well as increased

  18. New oxygen-fuel burner significantly improves electric arc furnace productivity with less energy consumption

    SciTech Connect

    Untz, J.; Knowles, D.

    1984-11-01

    This article describes a new system of electric arc steelmaking based on use of oxygen with newly designed burner for increased productivity and reduced energy consumption. The need for the oxygen-fuel burner has been recognized for years. Because of the shape of the flux lines of the arc between electrodes, some areas receive much more heat than others and consequently melt faster, leaving portions of the furnace charge unmelted for some time. Until these cold areas are melted into the bath, the arcing process must continue in a less efficient mode, delaying the completion of the process and therefore reducing productivity and using more energy. Steelmakers have been looking for a heat source to apply to these cold areas so that all material would melt at the same time. The oxygen-fuel burner was chosen because of its ability to deliver a directed flame at temperatures nearing 5000/sup 0/F.

  19. Organic core-sheath nanowire artificial synapses with femtojoule energy consumption

    PubMed Central

    Xu, Wentao; Min, Sung-Yong; Hwang, Hyunsang; Lee, Tae-Woo

    2016-01-01

    Emulation of biological synapses is an important step toward construction of large-scale brain-inspired electronics. Despite remarkable progress in emulating synaptic functions, current synaptic devices still consume energy that is orders of magnitude greater than do biological synapses (~10 fJ per synaptic event). Reduction of energy consumption of artificial synapses remains a difficult challenge. We report organic nanowire (ONW) synaptic transistors (STs) that emulate the important working principles of a biological synapse. The ONWs emulate the morphology of nerve fibers. With a core-sheath–structured ONW active channel and a well-confined 300-nm channel length obtained using ONW lithography, ~1.23 fJ per synaptic event for individual ONW was attained, which rivals that of biological synapses. The ONW STs provide a significant step toward realizing low-energy–consuming artificial intelligent electronics and open new approaches to assembling soft neuromorphic systems with nanometer feature size. PMID:27386556

  20. Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

    NASA Technical Reports Server (NTRS)

    Juhasz, A. J.

    1983-01-01

    An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as 'liquid pumping and internal compression'. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

  1. Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

    NASA Technical Reports Server (NTRS)

    Juhasz, A. J.

    1983-01-01

    An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as liquid pumping and internal compression. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

  2. Feline left ventricular oxygen consumption is not affected by volume expansion, ejection or redevelopment of pressure during relaxation.

    PubMed

    Duwel, C M; Westerhof, N

    1988-09-01

    We studied the dependency of myocardial oxygen consumption on the mechanical events during left ventricular relaxation in isolated supported cat hearts. The volume of the left ventricle was controlled by means of a balloon connected to a membrane pump. Oxygen consumption (MVO2 in cm3.min-1.100 g-1) for three protocols (PROT) performed at peak isovolumic pressure, was studied: (1) rapid ejection to zero pressure, (2) partial rapid ejection followed by redevelopment of pressure, (3) volume expansion during relaxation, and compared with oxygen consumption of isovolumic (ISOV) beats. We found (mean +/- SD): (table; see text) In the protocols 1 and 3 the differences were not significant (paired Student's t-test, p greater than 0.05). In protocols 1 and 2 left ventricular volume was decreased up to 2.15 cm3 (i.e. stroke volume, SV) during the pressure release. We studied the specific effect of ejection (i.e., wall muscle shortening) in a fourth protocol in which the ventricle ejected up to 2.7 cm3 under nearly zero pressure load (isobaric contraction). There was a small amount of oxygen consumption associable with this unloaded ejection i.e. MVO2 = 3.38 (+/- 0.47) + 0.30 (+/- 0.16) SV, but it was too small to compensate for a decrease in MVO2 expected from the pressure release according to the tension time index. These findings suggest that oxygen consumption does not depend on the mechanical events during ventricular relaxation. PMID:3174398

  3. Plant Wide Assessment of Energy Usage Utilizing SitEModelling as a Tool for Optimizing Energy Consumption

    SciTech Connect

    Ralf Janowsky, Ph.D.; Tracey Mole, Ph.D.

    2007-12-31

    The Evonik Degussa Corporation is the global market leader in the specialty chemicals industry. Innovative products and system solutions make an indispensable contribution to our customers' success. We refer to this as "creating essentials". In fiscal 2004, Degussa's 45,000 employees worldwide generated sales of 11.2 billion euros and operating profits (EBIT) of 965 million euros. Evonik Degussa Corporation has performed a plant wide energy usage assessment at the Mapleton, Illinois facility, which consumed 1,182,330 MMBTU in 2003. The purpose of this study was to identify opportunities for improvement regarding the plant’s utility requirements specific to their operation. The production is based mainly on natural gas usage for steam, process heating and hydrogen production. The current high price for natural gas in the US is not very competitive compared to other countries. Therefore, all efforts must be taken to minimize the utility consumption in order to maximize market position and minimize fixed cost increases due to the rising costs of energy. The main objective of this plant wide assessment was to use a methodology called Site Energy Modelling (SitE Modelling) to identify areas of potential improvement for energy savings, either in implementing a single process change or in changing the way different processes interact with each other. The overall goal was to achieve energy savings of more than 10% compared to the 2003 energy figures of the Mapleton site. The final savings breakdown is provided below: - 4.1% savings for steam generation and delivery These savings were accomplished through better control schemes, more constant and optimized loading of the boilers and increased boiler efficiency through an advanced control schemes. - 1.6% savings for plant chemical processing These saving were accomplished through optimized processing heating efficiency and batch recipes, as well as an optimized production schedule to help equalize the boiler load (e

  4. Eating 'attentively' reduces later energy consumption in overweight and obese females.

    PubMed

    Robinson, Eric; Kersbergen, Inge; Higgs, Suzanne

    2014-08-28

    Attentional and memory processes underpin appetite control, but whether encouraging overweight individuals to eat more 'attentively' can promote reductions in energy consumption is unclear. In the present study with a between-subjects design, a total of forty-eight overweight and obese females consumed a fixed lunchtime meal. Their ad libitum energy intake of high-energy snack food was observed during a second laboratory session that occurred later that day. In the focused-attention condition, participants ate their lunch while listening to audio instructions that encouraged them to pay attention to the food being eaten. In a control condition, participants ate while listening to an audio book with a neutral (non-food-related) content. To test whether focused attention influenced food intake via enhancing the memory of the earlier consumed meal, we measured the participants' memory of their lunchtime meal. Ad libitum snack intake was approximately 30 % lower for participants in the focused-attention condition than for those in the control condition, and this difference was statistically significant. There was limited evidence that attention decreased later food intake by enhancing memory representation of the earlier consumed meal. Eating attentively can lead to a substantial decrease in later energy intake in overweight and obese individuals. Behavioural strategies that encourage a more 'attentive' way of eating could promote sustained reductions in energy intake and weight loss. PMID:24933322

  5. Lower energy intake following consumption of Hi-oleic and regular peanuts compared with iso-energetic consumption of potato crisps.

    PubMed

    Barbour, Jayne A; Howe, Peter R C; Buckley, Jonathan D; Wright, Graeme C; Bryan, Janet; Coates, Alison M

    2014-11-01

    Snack foods can contribute a high proportion of energy intake to the diet. Peanuts are a snack food rich in unsaturated fatty acids, protein and fibre which have demonstrated satiety effects and may reduce total energy intake, despite their high energy density. This study examined the effects of consuming Hi-oleic (oleic acid ~75% of total fatty acids) peanuts and regular peanuts (oleic acid ~50% and higher in polyunsaturated fatty acids) compared with a high carbohydrate snack (potato crisps) on satiety and subsequent energy intake. Using a triple crossover study design, 24 participants (61 ± 1 years) consumed iso-energetic amounts (56-84 g) of Hi-oleic or regular peanuts or (60-90 g) potato crisps after an overnight fast. Hunger and satiety were assessed at baseline, 30, 60, 120 and 180 minutes following snack consumption using visual analogue scales, after which a cold buffet meal was freely consumed and energy intake measured. The same snack was consumed on 3 subsequent days with energy intake assessed from dietary records. This protocol was repeated weekly with each snack food. Total energy intake was lower following consumption of Hi-oleic and regular peanuts compared with crisps, both acutely during the buffet meal (-21%; p<.001 and -17%; p< .01) and over the 4 days (-11%; p< .001 and -9%; p< .01). Despite these reductions in energy intake, no differences in perceived satiety were observed. The findings suggest peanuts may be a preferred snack food to include in the diet for maintaining a healthy weight.

  6. Legal and regulatory issues affecting compressed air energy storage

    SciTech Connect

    Hendrickson, P.L.

    1981-07-01

    Several regulatory and legal issues that can potentially affect implementation of a compressed air energy storage (CAES) system are discussed. This technology involves the compression of air using base load electric power for storage in an underground storage medium. The air is subsequently released and allowed to pass through a turbine to generate electricity during periods of peak demand. The storage media considered most feasible are a mined hard rock cavern, a solution-mined cavern in a salt deposit, and a porous geologic formation (normally an aquifer) of suitable structure. The issues are discussed in four categories: regulatory issues common to most CAES facilities regardless of storage medium, regulatory issues applicable to particular CAES reservoir media, issues related to possible liability from CAES operations, and issues related to acquisition of appropriate property rights for CAES implementation. The focus is on selected federal regulation. Lesser attention is given to state and local regulation. (WHK)

  7. 10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... example, compressor percent run time), the unit, when tested under this test procedure, shall operate in a... accordance with the relevant provisions of 10 CFR part 430. Examples: A. Energy saving features that are... operating characteristics that are affected by ambient temperature (for example, compressor percent run...

  8. 10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... example, compressor percent run time), the unit, when tested under this test procedure, shall operate in a... accordance with the relevant provisions of 10 CFR part 430. Examples: A. Energy saving features that are... operating characteristics that are affected by ambient temperature (for example, compressor percent run...

  9. Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults

    PubMed Central

    Gibson, Sigrid A.; Horgan, Graham W.; Francis, Lucy E.; Gibson, Amelia A.; Stephen, Alison M.

    2016-01-01

    It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008–2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consumers of both beverages (BB), based on 4-day dietary records. Within-person data on beverage consumption on different days assessed the impact on energy intake. LCB consumers and NC consumed less energy and non-milk extrinsic sugars than other groups. Micronutrient intakes and food choices suggested higher dietary quality in NC/LCB consumers compared with SSB/BB consumers. Within individuals on different days, consumption of SSB, milk, juice, and alcohol were all associated with increased energy intake, while LCB and tea, coffee or water were associated with no change; or reduced energy intake when substituted for caloric beverages. Results indicate that NC and LCB consumers tend to have higher quality diets compared with SSB or BB consumers and do not compensate for sugar or energy deficits by consuming more sugary foods. PMID:26729159

  10. Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults.

    PubMed

    Gibson, Sigrid A; Horgan, Graham W; Francis, Lucy E; Gibson, Amelia A; Stephen, Alison M

    2016-01-01

    It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008-2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consumers of both beverages (BB), based on 4-day dietary records. Within-person data on beverage consumption on different days assessed the impact on energy intake. LCB consumers and NC consumed less energy and non-milk extrinsic sugars than other groups. Micronutrient intakes and food choices suggested higher dietary quality in NC/LCB consumers compared with SSB/BB consumers. Within individuals on different days, consumption of SSB, milk, juice, and alcohol were all associated with increased energy intake, while LCB and tea, coffee or water were associated with no change; or reduced energy intake when substituted for caloric beverages. Results indicate that NC and LCB consumers tend to have higher quality diets compared with SSB or BB consumers and do not compensate for sugar or energy deficits by consuming more sugary foods. PMID:26729159

  11. Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults.

    PubMed

    Gibson, Sigrid A; Horgan, Graham W; Francis, Lucy E; Gibson, Amelia A; Stephen, Alison M

    2016-01-02

    It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008-2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consumers of both beverages (BB), based on 4-day dietary records. Within-person data on beverage consumption on different days assessed the impact on energy intake. LCB consumers and NC consumed less energy and non-milk extrinsic sugars than other groups. Micronutrient intakes and food choices suggested higher dietary quality in NC/LCB consumers compared with SSB/BB consumers. Within individuals on different days, consumption of SSB, milk, juice, and alcohol were all associated with increased energy intake, while LCB and tea, coffee or water were associated with no change; or reduced energy intake when substituted for caloric beverages. Results indicate that NC and LCB consumers tend to have higher quality diets compared with SSB or BB consumers and do not compensate for sugar or energy deficits by consuming more sugary foods.

  12. The Campus Demotechnic Index: A comparison of technological energy consumption at U.S. colleges and universities

    NASA Astrophysics Data System (ADS)

    Vance, Leisha Ann

    The Campus Demotechnic Index (CDI) is a normalized metric developed to provide universities with a method for tracking progress toward or retreat from sustainability in their energy consumption. The CDI is modified after the Demotechnic Index of Mata et al. (1994). CDI values assess the total campus energy consumed against the total energy required to meet the campus population's basal metabolism. Like the D-Index, the CDI is thus a measure of the scalar quantity of energy consumed in excess of the quantity of energy required for simple survival on a per capita basis. For this research, data were collected from an on-line survey designed for U.S. colleges and universities, which requested information related to campus demographics and campus built and mobile environmental energy consumption. Data were requested for the years of 2000 to 2005. Wilcoxon signed rank test analyses were conducted to determine if CDI values significantly increased over time. ANOVAs, GLMs, correlations and regressions were conducted to determine if climate and campus size significantly influenced CDI. ANOVAs, correlations and regressions were conducted to determine the effect of acreage on mobile fuel consumption and to ascertain whether differing proportions between the built and mobile environments significantly influenced CDI values. Correlations and regressions were carried out to which variables best predicted CDI, and cluster analyses were conducted to find out if any significant groups existed based on CDI values, fossil fuel consumption and population per square foot. The knowledge gained from results of these analyses not only provides a depiction of campus energy consumption, but also puts campus energy consumption into context in that CDI scores allow peer institutional comparisons. Awareness of factors that contribute to campus energy use (and CDI ranks) could also facilitate prioritization of sustainability-related issues, as well as the design and establishment of sustainable

  13. Beverage consumption, appetite, and energy intake: what did you expect?123

    PubMed Central

    Cassady, Bridget A; Considine, Robert V

    2012-01-01

    Background: Beverage consumption is implicated in the overweight/obesity epidemic through the weaker energy compensation response it elicits compared with solid food forms. However, plausible mechanisms are not documented. Objective: This study assessed the cognitive and sensory contributions of differential postingestive responses to energy- and macronutrient-matched liquid (in beverage form) and solid food forms and identifies physiologic processes that may account for them. Design: Fifty-two healthy adults [mean ± SD age: 24.7 ± 5.5 y; BMI (in kg/m2): 26.3 ± 6.3] completed this randomized, 4-arm crossover study. Participants consumed oral liquid and solid preloads that they perceived, through cognitive manipulation, to be liquid or solid in their stomach (ie, oral liquid/perceived gastric liquid, oral liquid/perceived gastric solid, oral solid/perceived gastric liquid, or oral solid/perceived gastric solid). However, all preloads were designed to present a liquid gastric challenge. Appetite, gastric-emptying and orocecal transit times, and selected endocrine responses were monitored for the following 4 h; total energy intake was also recorded. Results: Oral-liquid and perceived gastric-liquid preloads elicited greater postprandial hunger and lower fullness sensations, more rapid gastric-emptying and orocecal transit times, attenuated insulin and glucagon-like peptide 1 release, and lower ghrelin suppression than did responses after oral-solid and perceived gastric-solid treatments (all P < 0.05). Faster gastric-emptying times were significantly associated with greater energy intake after consumption of perceived gastric-liquid preloads (P < 0.05). Energy intake was greater on days when perceived gastric-liquid preloads were consumed than when perceived gastric solids were consumed (2311 ± 95 compared with 1897 ± 72 kcal, P = 0.007). Conclusions: These data document sensory and cognitive effects of food form on ingestive behavior and identify physical and

  14. Energy-drink consumption and its relationship with substance use and sensation seeking among 10th grade students in Istanbul.

    PubMed

    Evren, Cuneyt; Evren, Bilge

    2015-06-01

    Aim of this study was to determine the prevalence and correlates of energy-drink (ED) consumption among 10th grade students in Istanbul/Turkey. Cross-sectional online self-report survey conducted in 45 schools from the 15 districts in Istanbul. The questionnaire included sections about demographic data, self-destructive behavior and use of substances including tobacco, alcohol and drugs. Also Psychological Screening Test for Adolescents (PSTA) was used. The analyses were conducted based on the 4957 subjects. Rate of those reported a ED consumption once within last year was 62.0% (n=3072), whereas rate of those reported ED consumption at least once in a month was 31.1%. There were consistent, statistically significant associations between genders, lifetime substance use (tobacco, alcohol and drug use), measures of sensation seeking, psychological problems (depression, anxiety, anger, impulsivity) and self-destructive behavior (self-harming behavior and suicidal thoughts) with ED consumption. In logistic regression models male gender, sensation seeking, life-time tobacco, alcohol and drug use predicted all frequencies of ED consumption. In addition to these predictors, anger and self-harming behavior also predicted ED consumption at least once in a month. There were no interactions between the associations of lifetime tobacco, alcohol and drug use with ED consumption. The findings suggest that the ED consumption of male students is related with three clusters of substances (tobacco, alcohol and drug) through sensation seeking and these relationships do not interact with each other. PMID:26006774

  15. Energy-drink consumption and its relationship with substance use and sensation seeking among 10th grade students in Istanbul.

    PubMed

    Evren, Cuneyt; Evren, Bilge

    2015-06-01

    Aim of this study was to determine the prevalence and correlates of energy-drink (ED) consumption among 10th grade students in Istanbul/Turkey. Cross-sectional online self-report survey conducted in 45 schools from the 15 districts in Istanbul. The questionnaire included sections about demographic data, self-destructive behavior and use of substances including tobacco, alcohol and drugs. Also Psychological Screening Test for Adolescents (PSTA) was used. The analyses were conducted based on the 4957 subjects. Rate of those reported a ED consumption once within last year was 62.0% (n=3072), whereas rate of those reported ED consumption at least once in a month was 31.1%. There were consistent, statistically significant associations between genders, lifetime substance use (tobacco, alcohol and drug use), measures of sensation seeking, psychological problems (depression, anxiety, anger, impulsivity) and self-destructive behavior (self-harming behavior and suicidal thoughts) with ED consumption. In logistic regression models male gender, sensation seeking, life-time tobacco, alcohol and drug use predicted all frequencies of ED consumption. In addition to these predictors, anger and self-harming behavior also predicted ED consumption at least once in a month. There were no interactions between the associations of lifetime tobacco, alcohol and drug use with ED consumption. The findings suggest that the ED consumption of male students is related with three clusters of substances (tobacco, alcohol and drug) through sensation seeking and these relationships do not interact with each other.

  16. Horse meat consumption affects iron status, lipid profile and fatty acid composition of red blood cells in healthy volunteers.

    PubMed

    Del Bó, Cristian; Simonetti, Paolo; Gardana, Claudio; Riso, Patrizia; Lucchini, Giorgio; Ciappellano, Salvatore

    2013-03-01

    This study investigated the effect of moderate consumption of horse meat on iron status, lipid profile and fatty acid composition of red blood cells in healthy male volunteers. Fifty-two subjects were randomly assigned to two groups of 26 subjects each: a test group consuming two portions of 175 g/week of horse meat, and a control group that abstained from eating horse meat during the 90 days trial. Before and after 90 days, blood samples were collected for analysis. Horse meat consumption significantly (p ≤ 0.05) reduced serum levels of total and low-density lipoprotein cholesterol ( - 6.2% and - 9.1%, respectively) and transferrin ( - 4.6%). Total n - 3, long chain polyunsaturated fatty acids n - 3 and docosahexeanoic acid content in erythrocytes increased (p ≤ 0.05) by about 7.8%, 8% and 11%, respectively. In conclusion, the regular consumption of horse meat may contribute to the dietary intake of n - 3 polyunsaturated fatty acids and may improve lipid profile and iron status in healthy subjects.

  17. Celiac trunk and branches dissection due to energy drink consumption and heavy resistance exercise: case report and review of literature.

    PubMed

    González, Wilma; Altieri, Pablo I; Alvarado, Enrique; Banchs, Héctor L; Colón, Edgar; Escobales, Nelson; Crespo, María

    2015-01-01

    Higher doses and consumption of energy drinks leads to cardiovascular effects and potential consequences. Principal components found in energy drinks such as caffeine, guarana and taurine has been related to dilatation, aneurysm formation, dissection and ruptures. There is no evidence showing an integration of these components and its effects in endothelium and aortic walls due to higher levels of pressure during exercises. We report a case of a 44 years male with celiac trunk and branches dissection due to long-term consumption of energy drinks and intense exercise routine. Our proposition relates cell and vessel walls alterations including elasticity in endothelial wall due to higher blood pressure, resistance by intense exercise routine and long-term consumption of energy drinks. PMID:26035983

  18. Celiac trunk and branches dissection due to energy drink consumption and heavy resistance exercise: case report and review of literature.

    PubMed

    González, Wilma; Altieri, Pablo I; Alvarado, Enrique; Banchs, Héctor L; Colón, Edgar; Escobales, Nelson; Crespo, María

    2015-01-01

    Higher doses and consumption of energy drinks leads to cardiovascular effects and potential consequences. Principal components found in energy drinks such as caffeine, guarana and taurine has been related to dilatation, aneurysm formation, dissection and ruptures. There is no evidence showing an integration of these components and its effects in endothelium and aortic walls due to higher levels of pressure during exercises. We report a case of a 44 years male with celiac trunk and branches dissection due to long-term consumption of energy drinks and intense exercise routine. Our proposition relates cell and vessel walls alterations including elasticity in endothelial wall due to higher blood pressure, resistance by intense exercise routine and long-term consumption of energy drinks.

  19. Future US energy demands based upon traditional consumption patterns lead to requirements which significantly exceed domestic supply

    NASA Technical Reports Server (NTRS)

    1975-01-01

    Energy consumption in the United States has risen in response to both increasing population and to increasing levels of affluence. Depletion of domestic energy reserves requires consumption modulation, production of fossil fuels, more efficient conversion techniques, and large scale transitions to non-fossile fuel energy sources. Widening disparity between the wealthy and poor nations of the world contributes to trends that increase the likelihood of group action by the lesser developed countries to achieve political and economic goals. The formation of anticartel cartels is envisioned.

  20. Simulated thermal energy demand and actual energy consumption in refurbished and non-refurbished buildings

    NASA Astrophysics Data System (ADS)

    Ilie, C. A.; Visa, I.; Duta, A.

    2016-08-01

    The EU legal frame imposes the Nearly Zero Energy Buildings (nZEB) status to any new public building starting with January 1st, 2019 and for any other new building starting with 2021. Basically, nZEB represents a Low Energy Building (LEB) that covers more than half of the energy demand by using renewable energy systems installed on or close to it. Thus, two steps have to be followed in developing nZEB: (1) reaching the LEB status through state- of-the art architectural and construction solutions (for the new buildings) or through refurbishing for the already existent buildings, followed by (2) implementing renewables; in Romania, over 65% of the energy demand in a building is directly linked to heating, domestic hot water (DHW), and - in certain areas - for cooling. Thus, effort should be directed to reduce the thermal energy demand to be further covered by using clean and affordable systems: solar- thermal systems, heat pumps, biomass, etc. or their hybrid combinations. Obviously this demand is influenced by the onsite climatic profile and by the building performance. An almost worst case scenario is approached in the paper, considering a community implemented in a mountain area, with cold and long winters and mild summers (Odorheiul Secuiesc city, Harghita county, Romania). Three representative types of buildings are analysed: multi-family households (in blocks of flats), single-family houses and administrative buildings. For the first two types, old and refurbished buildings were comparatively discussed.