Science.gov

Sample records for affluent effluent growing

  1. Problems of Affluent School Districts.

    ERIC Educational Resources Information Center

    McLoone, Eugene P.

    All school districts are affected by the stagnant economy, the growing needs of the public sector, the increased burden of transfer payments, and the limited growth of public revenues. Retrenchment is common to all school districts, but it may be more severe in affluent districts. By 1969-70, suburban school systems were the clear-cut expenditure…

  2. Weapons in an Affluent Suburban School.

    ERIC Educational Resources Information Center

    Hawkins, Stephanie R.; Campanaro, Amy; Pitts, Traci Bice; Steiner, Hans

    2002-01-01

    Investigated the self-reported violence and weapon carrying behaviors of largely affluent, suburban adolescents in San Francisco, California. Survey data indicated that weapons carrying was a significant issue for these high school students. Predictors of weapon carrying did not differ in comparison to predictors among inner city youth. Distinct…

  3. Decolorization of palm oil mill effluent using growing cultures of Curvularia clavata.

    PubMed

    Neoh, Chin Hong; Lam, Chi Yong; Lim, Chi Kim; Yahya, Adibah; Ibrahim, Zaharah

    2014-03-01

    Agricultural wastewater that produces color are of environmental and health concern as colored effluent can produce toxic and carcinogenic by-products. From this study, batch culture optimization using response surface methods indicated that the fungus isolated from the pineapple solid waste, Curvularia clavata was able to decolorize sterile palm oil mill effluent (POME) which is mainly associated with polyphenol and lignin. Results showed successful decolorization of POME up to 80 % (initial ADMI [American Dye Manufacturing Index] of 3,793) with 54 % contributed by biosorption and 46 % by biodegradation after 5 days of treatment. Analysis using HPLC and GC-MS showed the degradation of color causing compound such as 3-methoxyphenyl isothiocynate and the production of new metabolites. Ecotoxicity test indicated that the decolorized effluent is safe for discharge. To determine the longevity of the fungus for a prolonged decolorization period, sequential batch decolorization studies were carried out. The results showed that lignin peroxidase and laccase were the main ligninolytic enzymes involved in the degradation of color. Carboxymethyl cellulase (CMCase) and xylanase activities were also detected suggesting possible roles of the enzymes in promoting growth of the fungus which consequently contributed to improved decolorization of POME. In conclusion, the ability of C. clavata in treating color of POME indicated that C. clavata is of potential use for decolorization and degradation of agricultural wastewater containing polyphenolic compounds.

  4. Is Growing up Affluent Risky for Adolescents or Is the Problem Growing up in an Affluent Neighborhood?

    ERIC Educational Resources Information Center

    Lund, Terese J.; Dearing, Eric

    2013-01-01

    Community studies indicating that affluence has social-emotional consequences for youth have conflated family and neighborhood wealth. We examined adolescent boys' delinquency and adolescent girls' anxiety-depression as a function of family, neighborhood, and cumulative affluence in a sample that is primarily of European-American…

  5. Living alongside more affluent neighbors predicts greater involvement in antisocial behavior among low-income boys

    PubMed Central

    Odgers, Candice L.; Donley, Sachiko; Caspi, Avshalom; Bates, Christopher J.; Moffitt, Terrie E.

    2016-01-01

    Background The creation of economically mixed communities has been proposed as one way to improve the life outcomes of children growing up in poverty. However, whether low-income children benefit from living alongside more affluent neighbors is unknown. Method Prospectively gathered data on over 1,600 children from the Environmental Risk (E-Risk) Longitudinal Twin Study living in urban environments is used to test whether living alongside more affluent neighbors (measured via high-resolution geo-spatial indices) predicts low-income children’s antisocial behavior (reported by mothers and teachers at the ages of 5, 7, 10, and 12). Results Results indicated that low-income boys (but not girls) surrounded by more affluent neighbors had higher levels of antisocial behavior than their peers embedded in concentrated poverty. The negative effect of growing up alongside more affluent neighbors on low-income boys’ antisocial behavior held across childhood and after controlling for key neighborhood and family-level factors. Conclusions Findings suggest that efforts to create more economically mixed communities for children, if not properly supported, may have iatrogenic effects on boys’ antisocial behavior. PMID:25611118

  6. Methane digester effluent from swine excreta as a nutrient and water source for growing and finishing swine.

    PubMed

    Veum, T L; Saenz, C A; Iannotti, E L

    2015-01-01

    The experimental objective was to evaluate swine methane digester effluent (SMDE) as a water and nutrient source for swine. The mesophilic methane digester was loaded daily with manure from finishing swine fed a corn-soybean meal diet. Dry diet was mixed with SMDE (3.7% DM) and fed twice daily in troughs. Tap water was provided and consumption measured. Barrows were group fed (3 pigs/pen) and adapted to SMDE by increasing SMDE for 7 d, with the full amount fed from d 8 to the end of the feeding phase (d 21, 14, 23, or 37 for Exp. 1 to 4, respectively). Blood samples were collected on d 0, 10, 21, and 31 to determine plasma concentrations of glucose and plasma urea N (PUN). Barrows were placed in individual metabolism cages for a 5-d acclimation and a 5-d fecal and urine collection to determine apparent N and energy utilization. For Exp. 1, 18 pigs averaging 75 kg BW were allotted to diets with 0, 48.6, or 63.7% SMDE, as-fed basis. For Exp. 2 and 3, 12 pigs/experiment averaged 117 and 70 kg, respectively, and were allotted to diets with 0 or 63.7% SMDE, as-fed basis. At the end of Exp. 2 and 3, pigs were sacrificed and liver samples were collected to determine urea cycle enzyme activity, and loin was saved for taste panel evaluation. For Exp. 4, pigs averaged 40 kg and were allotted to diets with 0 or 57.5% SMDE, as-fed basis. The ADFI, ADG, and G:F of finishing swine (Exp. 1 to 3) were not reduced by feeding diets containing 63.7% SMDE (as-fed basis), whereas ADG and G:F of growing swine (Exp. 4) were reduced (P < 0.01) by feeding a diet containing 57.5% SMDE. Pigs fed diets containing SMDE consumed 31 to 56% less (P < 0.05) water and had greater (P < 0.01) PUN concentrations than pigs fed control diets. Pigs fed diets containing SMDE excreted more (g, P < 0.05) fecal N and absorbed and retained less N (%; P < 0.01) and energy (DE and ME) than pigs fed control diets. Treatment had no effect on urea cycle enzyme activity. In conclusion, finishing swine adapted to

  7. Affluent Neighborhood Persistence and Change in U.S. Cities

    PubMed Central

    Solari, Claudia D.

    2014-01-01

    Places are stratified along a hierarchy, with the affluent occupying the most resource-rich neighborhoods. Affluent neighborhood advantages include safety, high quality schools, and proximity to jobs. An additional benefit may be local economic stability over time. In a national context of rising interpersonal income inequality since 1970 and of the Great Recession, trends in neighborhood persistence and change expose this spatial advantage of the affluent. Using census data from 1970 to 2010, I find increasing rates of stability in the affluence and poverty of neighborhoods through 2000, with declines during the last decade. I also find that rates of chronic poverty and persistent affluence are high, ranging between 30 and 35 percent of neighborhoods across the 40-year period. This study highlights the structural persistence of affluence and poverty of neighborhoods as a vehicle for perpetuating social inequality and economic segregation. PMID:24790545

  8. Egalitarianism and Educational Excellence: Compatible Goals for Affluent Societies?

    ERIC Educational Resources Information Center

    Condron, Dennis J.

    2011-01-01

    Explanations for U.S. students' performance on international comparisons of educational achievement abound, with much of the scholarly and public discussion centering on cross-national differences in education systems. The author argues that the connection between economic inequality and educational achievement in affluent societies deserves far…

  9. Education and Poverty in Affluent Countries. Routledge Research in Education

    ERIC Educational Resources Information Center

    Raffo, Carlo, Ed.; Dyson, Alan, Ed.; Gunter, Helen, Ed.; Hall, Dave, Ed.; Jones, Lisa, Ed.; Kalambouka, Afroditi, Ed.

    2011-01-01

    For the first time, researchers, policymakers and practitioners across the world will have access to a comprehensive mapping of research evidence and policy strategies about education and poverty in affluent countries. Although there is widespread agreement that poverty and poor educational outcomes are related, there are competing explanations as…

  10. Economic Globalization, Industrialization and Deindustrialization in Affluent Democracies

    ERIC Educational Resources Information Center

    Brady, David; Denniston, Ryan

    2006-01-01

    This study reexamines the relationship between economic globalization and manufacturing employment in affluent democracies. After reviewing past research, including the well-supported Rowthorn model, we propose a differentiation-saturation model that theorizes that globalization has a curvilinear relationship with manufacturing employment. Using…

  11. Contamination from an affluent of Furnas reservoir by trace metals.

    PubMed

    Cavalcanti, P P; Rodrigues, L C A; Beijo, L A; Barbosa, S; Xavier, T T; Magalhães, F

    2014-11-01

    This study aims to determine concentrations and characterize trace metals distribution in an affluent of Furnas reservoir, Alfenas-MG. Water and sediment samples were taken monthly, 2010/10-2011/07 in five sites of Córrego do Pântano for subsequent determination of Pb, Cd and Zn levels by chemical analysis. The stream studied is in disagreement with Brazilian legislation for Class II water bodies (CONAMA 357). The highlights are the unsuitable concentrations of Pb for human consumption, according to Ministry of Health 2914 decree, providing risk for population.

  12. Brief Report: Adolescent Adjustment in Affluent Communities: The Role of Motivational Climate and Goal Orientation

    ERIC Educational Resources Information Center

    Travers, Lea V.; Bohnert, Amy M.; Randall, Edin T.

    2013-01-01

    Researchers now recognize that affluent youth experience tremendous achievement pressures, yet contributing factors or outcomes are rarely explored. Using a sample of affluent adolescents, the present study investigates the mediating role of goal orientation (GO) on relations between school motivational climate (MC) and adolescent adjustment.…

  13. Obesity among adolescents of affluent public schools in Meerut.

    PubMed

    Jain, Seema; Pant, Bhawna; Chopra, H; Tiwari, R

    2010-01-01

    The prevalence of obesity has increased worldwide in all segments of the population due to increased industrialization, urbanization, mechanization, and associated changes in diet and lifestyles. Change in diet habit of consuming more high energy fast foods and shifting to sedentary lifestyle has affected our children and also increased the risk of chronic diseases among adolescents. Childhood obesity has association with increased risk of coronary heart disease, stroke, and cancer in later life. Therefore, its control and prevention is one of the major concerns for all developing nations. The present school-based cross-sectional study was carried out among 2785 affluent adolescents of six public schools in Meerut during the period October 2003 to March 2004. The objective is to assess the magnitude of overweight and obesity in adolescents and associated risk factors, with the help of the ELIZ health pathway based on body mass index criteria. Prevalence of overweight and obesity was found to be 19.7% and 5.3% in girls and 18.36% and 10.82% in boys. Obesity was found to be significantly associated with high intake of junk foods (P < 0.05), binge eating, high calorie intake (P < 0.05), lower physical activity (P < 0.05), and prolonged TV watching (P < 0.05). PMID:21245587

  14. Prevalence of obesity among affluent school children in Dhaka.

    PubMed

    Mohsin, F; Tayyeb, S; Baki, A; Sarker, S; Zabeen, B; Begum, T; Azad, K; Nahar, N

    2010-10-01

    A cross sectional study was conducted in September 2006 in one of the private schools in Dhaka, Bangladesh to see the prevalence of obesity among affluent school children and adolescents. Informed consent was taken from school authority to take anthropometric measurement of all school children. Standing height was measured with a stadiometer and weight with a bathroom scale. Waist and hip circumference were measured with a measuring tape. The body mass index (BMI) was calculated using weight in kilogram/(height in meter)2 formula. Obesity was defined as BMI≥95th percentile for age and sex, over weight as BMI≥85th percentile for age and sex, normal weight as BMI between 5th and 84th percentile and underweight as BMI <5th percentile. Official centers for disease control (CDC) growth chart for boys and girls age 2-20 years was used. Children and adolescents were divided into group 1(3-5 years), Group 2(6-9years), group 3(10-13 years) and group 4(14-18 years). There were a total of 468 children and adolescents (male 266, female 202). In group 1 there were 110 children, in group 2 there were177 children, in group 3 and 4 there were 149 and 32 adolescents respectively. The prevalence of obesity was 17.9%, higher among males (19.9%), compared to females (15.3%). Obesity was highest (27.7%) in group 2, 14.5% in group 1, 10.7% in group 3 and 9.4% in group 4. PMID:20956898

  15. Understanding affluent adolescent adjustment: The interplay of parental perfectionism, perceived parental pressure, and organized activity involvement.

    PubMed

    Randall, Edin T; Bohnert, Amy M; Travers, Lea V

    2015-06-01

    This cross-sectional study examined relations between affluent adolescent adjustment and culturally salient factors within parent-child relationship and extracurricular domain. Bootstrapping techniques evaluated mediated effects among parental perfectionism, perceived parental pressure, intensity of organized activity (OA) involvement, and adolescent adjustment (i.e., depressive and anxiety symptoms, life satisfaction) within a sample of 10th graders and their parents (n = 88 parent-child pairs) from four high schools in affluent communities. Findings indicated that adolescents with more perfectionistic parents perceived more parental pressure and experienced poorer adjustment. Results also demonstrated that affluent adolescents who perceived more parental pressure were more intensely involved in OAs, but that higher OA intensity was linked to better adjustment. Findings highlight the importance of considering parental perfectionism when understanding adolescent behaviors and psychological outcomes, confirm the negative direct effects of parental pressure on adjustment, and corroborate prior research dispelling that highly intense OA involvement is linked to adolescent maladjustment. PMID:25828548

  16. High prevalence of type 2 diabetes mellitus in affluent urban Indians.

    PubMed

    Boddula, R; Yadav, S; Bhatia, V; Genitta, G; Pandey, D; Kumar, A; Singh, H K; Ramesh, V; Julka, S; Bansal, B; Srikant, K; Bhatia, E

    2008-08-01

    The highest prevalence of type 2 diabetes mellitus in developing countries occurs in the upper socio-economic group, but this has not been well documented in Indians. The age and sex standardized prevalence of diabetes in 1112 affluent adult Indian subjects was 21.1%. This is the highest prevalence of diabetes reported from India.

  17. Live like the Affluent in College, Live like a Student after Graduation

    ERIC Educational Resources Information Center

    Shaffer, Leigh S.

    2012-01-01

    Recent changes in basic economic conditions make it harder for college students to find their way in the new economy. However, in addition to these structural changes that drive up the costs of living in society, many students are also suffering from the effects of developing an unsustainable, affluent lifestyle both before and during the pursuit…

  18. Welcoming Taye: How His English Teacher Embraced an African American Transfer Student in an Affluent Suburb

    ERIC Educational Resources Information Center

    Hill, K. Dara

    2014-01-01

    This case study narrative examines the circumstances underlying problems of residency in an affluent Midwest suburb experiencing an unexpected influx of working class African American students. Dilemmas engender a cultural mismatch between teachers and students and discomfort with African-American males. In a controversial climate where students…

  19. Is Deindustrialization Causing High Unemployment in Affluent Countries? Evidence from 16 OECD Countries, 1970-2003

    ERIC Educational Resources Information Center

    Kollmeyer, Christopher; Pichler, Florian

    2013-01-01

    This study assesses the possibility that deindustrialization has been contributing to the persistently high unemployment rates experienced by most affluent countries since the mid-1970s. Combining insights from Lilien's (1982) "sectoral shift" thesis and the literature on deindustrialization, the authors assert that the decades-long contraction of…

  20. The Mediating Role of Engagement in Mentoring Relationships and Self-Esteem among Affluent Adolescent Girls

    ERIC Educational Resources Information Center

    Liang, Belle; Lund, Terese Jean; Mousseau, Angela M. Desilva; Spencer, Renée

    2016-01-01

    This study examined the influence of growth-fostering mentoring relationships on the self-esteem of adolescent female students from affluent communities. Studies have demonstrated that this population of students is susceptible to psychological distress and self-esteem problems, due to perfectionistic strivings and achievement pressures.…

  1. Out-of-School Literacy Activities of Affluent Early Adolescents: Selective Competencies and Hidden Needs

    ERIC Educational Resources Information Center

    Hester, Amy

    2012-01-01

    Few studies have documented the literacy activities in an after-school setting of affluent early adolescents assigned to remedial reading. This may be because these students are not considered to be at risk of academic failure. The out-of-school literacy activities of 3 sixth-grade students were examined in this qualitative research. Multiple data…

  2. Taiwan: growing, growing, gone.

    PubMed

    Hanson, R

    1979-10-01

    Accommodation between Taiwan and the People's Republic of China may not be inconceivable as trade contacts (though officially disallowed) grow. Because of Taiwan's well-established success and the pressing need in China to industrialize, it appears, however, that such an accommodation will occur only after China becomes more like Taiwan. Taiwan owes its success, first, to land reform and then, in the 1960s, to steady industrialization. Besides broad controls over money supply and capital designed to ward off inflationary pressures when needed, and the grand outlines for development, another factor in the island's economic success is that the government has interfered little with private enterprise. The economy has an underpinning of small to medium size businesses. There are more than 10,000 trading companies. This diverse foundation has given the economy as a whole a flexible buffer on which more sophisticated industires can be formed. PMID:12278253

  3. Are affluent youth truly "at risk"? Vulnerability and resilience across three diverse samples.

    PubMed

    Luthar, Suniya S; Barkin, Samuel H

    2012-05-01

    Building upon prior findings of elevated problems among East Coast suburban youth through the 11th grade, this study establishes disproportionately high incidence of maladjustment across three disparate samples: East Coast Suburban youth at the end of their senior year in high school, and 11th and 12th graders in (a) a Northwest suburb and (b) an East Coast city. Both East Coast samples showed pronounced elevations in substance use, whereas the Northwest suburban sample showed marked vulnerability in serious internalizing and externalizing symptoms. Across all samples, parents' low perceived containment for substance use (lax repercussions on discovering use) was a major vulnerability factor, followed by parents' knowledge of their teens' activities. Overall, adolescents' symptom levels were more strongly related to their relationships with mothers than with fathers. An exception was boys' apparent vulnerability to fathers', but not mothers', perceived depressive symptoms. As with affluent eighth graders, we found that "overscheduling" in extracurriculars is not a critical vulnerability factor among these high school students. Finally, youth reports suggested that most affluent parents do not indiscriminately bail their children out of all problem situations (although a small subset, apparently, do). Results are discussed along with the implications for practice and for future research. PMID:22559123

  4. Are affluent youth truly “at risk”? Vulnerability and resilience across three diverse samples

    PubMed Central

    LUTHAR, SUNIYA S.; BARKIN, SAMUEL H.

    2015-01-01

    Building upon prior findings of elevated problems among East Coast suburban youth through the 11th grade, this study establishes disproportionately high incidence of maladjustment across three disparate samples: East Coast Suburban youth at the end of their senior year in high school, and 11th and 12th graders in (a) a Northwest suburb and (b) an East Coast city. Both East Coast samples showed pronounced elevations in substance use, whereas the Northwest suburban sample showed marked vulnerability in serious internalizing and externalizing symptoms. Across all samples, parents’ low perceived containment for substance use (lax repercussions on discovering use) was a major vulnerability factor, followed by parents’ knowledge of their teens’ activities. Overall, adolescents’ symptom levels were more strongly related to their relationships with mothers than with fathers. An exception was boys’ apparent vulnerability to fathers’, but not mothers’, perceived depressive symptoms. As with affluent eighth graders, we found that “overscheduling” in extracurriculars is not a critical vulnerability factor among these high school students. Finally, youth reports suggested that most affluent parents do not indiscriminately bail their children out of all problem situations (although a small subset, apparently, do). Results are discussed along with the implications for practice and for future research. PMID:22559123

  5. Sight-Threatening Ocular Diseases Remain Underdiagnosed Among Children Of Less Affluent Families.

    PubMed

    Stein, Joshua D; Andrews, Chris; Musch, David C; Green, Carmen; Lee, Paul P

    2016-08-01

    Sight-threatening eye diseases such as strabismus (misaligned eyes) and amblyopia (lazy eye) develop during childhood. The earlier in life these diseases are diagnosed and effectively treated, the greater the chance of preventing irreversible long-term sight loss. Using 2001-14 claims data for nearly 900,000 US children with health insurance, we followed a cohort for up to fourteen years from birth, to assess whether household net worth affected rates of visits to ophthalmologists and optometrists or rates of diagnoses of strabismus and amblyopia. We found considerably lower use of eye care services among children in less affluent families than among those in more affluent ones, resulting in estimates of nearly 13,000 missed strabismus diagnoses and over 5,000 missed amblyopia diagnoses in a ten-year period. Despite ongoing efforts to improve screening rates for serious childhood ocular disorders, more attention should be directed to overcoming economic barriers that keep children from obtaining necessary eye care services. PMID:27503958

  6. Targeting, universalism, and single-mother poverty: a multilevel analysis across 18 affluent democracies.

    PubMed

    Brady, David; Burroway, Rebekah

    2012-05-01

    We examine the influence of individual characteristics and targeted and universal social policy on single-mother poverty with a multilevel analysis across 18 affluent Western democracies. Although single mothers are disproportionately poor in all countries, there is even more cross-national variation in single-mother poverty than in poverty among the overall population. By far, the United States has the highest rate of poverty among single mothers among affluent democracies. The analyses show that single-mother poverty is a function of the household's employment, education, and age composition, and the presence of other adults in the household. Beyond individual characteristics, social policy exerts substantial influence on single-mother poverty. We find that two measures of universal social policy significantly reduce single-mother poverty. However, one measure of targeted social policy does not have significant effects, and another measure is significantly negative only when controlling for universal social policy. Moreover, the effects of universal social policy are larger. Additional analyses show that universal social policy does not have counterproductive consequences in terms of family structure or employment, while the results are less clear for targeted social policy. Although debates often focus on altering the behavior or characteristics of single mothers, welfare universalism could be an even more effective anti-poverty strategy. PMID:22403034

  7. Behavioural therapy for smoking cessation: The effectiveness of different intervention types for disadvantaged and affluent smokers☆

    PubMed Central

    Hiscock, Rosemary; Murray, Susan; Brose, Leonie S.; McEwen, Andy; Bee, Jo Leonardi; Dobbie, Fiona; Bauld, Linda

    2013-01-01

    Background Disadvantaged smokers are less likely to be successful when trying to stop smoking than more affluent smokers. In the UK, NHS Stop Smoking Services (SSS) provide a range of pharmacotherapy and behavioural support, delivered by advisors with a range of backgrounds. Whether the types of support provided and who provides it influence differences in quit rates amongst low SES smokers compared with high SES smokers has not previously been examined. Methods 202,084 records of smokers in England who attended a NHS Stop Smoking Service between July 2010 and June 2011 were acquired. Smokers were followed-up by services at four weeks post quit date. Multilevel logistic regression models of CO validated quits were employed. Disadvantage was explored through the National Statistics Socio-Economic Classification (NS-SEC) and by eligibility for free prescriptions, an indicator of low income amongst adults aged between 19 and 59 in England. Results Affluent smokers were more likely to quit than disadvantaged smokers (OR 1.38 (1.35 to 1.42) for clients who paid for prescriptions compared to those eligible for free prescriptions). 80% of service clients received one-to-one counselling but open group forms of behavioural therapy were more successful (main effect OR 1.26 (1.12 to 1.41)) except amongst some of the most disadvantaged clients (long-term unemployed and prisoners). Closed groups were little deployed and they were not significantly more successful than one-to-one behavioural therapy after controls. Who delivered treatment did make a difference for some clients, with all but the most affluent less likely to be successful if they had been treated by a nurse compared with other types of advisers, including smoking cessation specialists (main effect OR 0.73 (0.65 to 0.83)). Conclusion This study provides further evidence that disadvantaged smokers find quitting more difficult even when they have attended a smoking cessation programme. The findings suggest that open

  8. Screening for obesity in affluent females: body mass index and its comparison with skin fold thickness.

    PubMed

    Asthana, S; Gupta, V M; Mishra, R N

    1998-01-01

    In the present study 625 females above 15 years of age residing in affluent localities of Varanasi city were selected by multi-stage stratified random sampling technique. Body Mass Index (BMI) and Skin-Fold Thickness (SFT) were compared as indices of obesity. Prevalence of obesity by BMI and SFT was 30.24 and 49.12 respectively. SFT gave significantly higher prevalence rate of obesity as compared to BMI. It is possible that western population based SFT cut-off points may not be truly applicable to Indian study. The sensitivity, specificity and predictive value of 'sum of SFT at four sites' were calculated at different cut-off points, and it was observed, that values > or = 90 mm is the best cut-off point instead of 80 mm, for detecting obesity in the Indian context.

  9. Growth performance of affluent Indian children is similar to that in developed countries.

    PubMed Central

    Bhandari, Nita; Bahl, Rajiv; Taneja, Sunita; de Onis, Mercedes; Bhan, Maharaj K.

    2002-01-01

    OBJECTIVE: A cross-sectional survey was conducted in order to determine whether an affluent population in south Delhi had a growth performance similar to that in developed countries and to identify socioeconomic factors that militated against optimal growth in this group. METHODS: The weights and lengths of 395 children aged 12-23 months and the heights of 331 mothers and 153 grandmothers were measured and information was obtained on family socioeconomic status and child-feeding practices. Children born prematurely, i.e. before 37 weeks of gestation, and those with illness adversely affecting growth, were excluded from the analysis, as with the NCHS/WHO reference population. RESULTS: In 341 children included in the analysis, the mean Z-scores for weight-for-age, length-for-age and weight-for-length were -0.45, -0.28 and -0.32 respectively. About 6% of the children were underweight (weight-for-age Z-score < or =-2), 3% were stunted (length-for-age Z-score < or =-2), and 4% were wasted (weight-for-length Z-score < or =-2). The factors that were significantly associated with higher length-for-age were one or both parents having 17 years or more of education (mean length-for-age Z-score -0.17) and non-vegetarian diet (mean length-for-age Z-score - 0.18). No socioeconomic factors were associated with mean weight-for-length. CONCLUSION: The children in this affluent population were close to the NCHS/WHO reference population with regard to anthropometric indicators. The subpopulation with higher parental education had even better growth. It is intended to include this subpopulation in the WHO Multicentre Growth Reference Study. PMID:11984604

  10. Putting Poverty in Political Context: A Multi-Level Analysis of Adult Poverty across 18 Affluent Democracies

    ERIC Educational Resources Information Center

    Brady, David; Fullerton, Andrew S.; Cross, Jennifer Moren

    2009-01-01

    Our study analyzes how political context, embodied by the welfare state and Leftist political actors, shapes individual poverty. Using the Luxembourg Income Study, we conduct a multi-level analysis of working-aged adult poverty across 18 affluent Western democracies. Our index of welfare generosity has a negative effect on poverty net of…

  11. Chemical composition and sources of particle pollution in affluent and poor neighborhoods of Accra, Ghana

    NASA Astrophysics Data System (ADS)

    Zhou, Zheng; Dionisio, Kathie L.; Verissimo, Thiago G.; Kerr, Americo S.; Coull, Brent; Arku, Raphael E.; Koutrakis, Petros; Spengler, John D.; Hughes, Allison F.; Vallarino, Jose; Agyei-Mensah, Samuel; Ezzati, Majid

    2013-12-01

    The highest levels of air pollution in the world now occur in developing country cities, where air pollution sources differ from high-income countries. We analyzed particulate matter (PM) chemical composition and estimated the contributions of various sources to particle pollution in poor and affluent neighborhoods of Accra, Ghana. Elements from earth’s crust were most abundant during the seasonal Harmattan period between late December and late January when Saharan dust is carried to coastal West Africa. During Harmattan, crustal particles accounted for 55 μg m-3 (37%) of fine particle (PM2.5) mass and 128 μg m-3 (42%) of PM10 mass. Outside Harmattan, biomass combustion, which was associated with higher black carbon, potassium, and sulfur, accounted for between 10.6 and 21.3 μg m-3 of fine particle mass in different neighborhoods, with its contribution largest in the poorest neighborhood. Other sources were sea salt, vehicle emissions, tire and brake wear, road dust, and solid waste burning. Reducing air pollution in African cities requires policies related to energy, transportation and urban planning, and forestry and agriculture, with explicit attention to impacts of each strategy in poor communities. Such cross-sectoral integration requires emphasis on urban environment and urban poverty in the post-2015 Development Agenda.

  12. Potential microbiological contamination of effluents in poultry and swine abattoirs.

    PubMed

    Barros, L S S; Amaral, L A; Lorenzon, C S; Junior, J L; Neto, J G Machado

    2007-04-01

    Health risks in the effluents of seven swine abattoirs and of seven poultry abattoirs were evaluated with regard to environment degradation and to dissemination of pathogenic microorganisms during the rainy and dry seasons. Supply-water samples from affluents and effluents of the treatment systems at different sites within the abattoir processing system were analysed. Similarly, water samples from the three recipient sites (emission point, 100 m upstream, 100 m downstream) were also analysed. Temperature, free residual chlorine (FRC), total coliform bacteria, Escherichia coli, enterococci, identification and serotyping of salmonellae were assessed. Scalding is the most significant stage in the slaughtering chain (P<0.05) when temperature is taken into account. Temperatures at effluents and at the sampled sites in the water bodies accorded to state and federal legislation standards. Supply waters did not meet the standards for FRC and microbial count standards according to the Ministry of Health and within limits imposed by the Industrial and Sanitary Inspection Regulations for Animal Products. Feather plucking and evisceration in poultry slaughter and the cleansing of carcasses and facilities in poultry and swine slaughtering had the highest contamination impact. The three loci at the water bodies were above the microbiological standards for classes II and III sites, in conformity with Law 8468 of the state of São Paulo, Brazil and Conama. Salmonella was found at several sites during slaughter, at both types of abattoirs, including in the effluent treatment system. This showed that these sites were the dissemination sources of the microorganism. PMID:16893484

  13. Crystal growing

    NASA Technical Reports Server (NTRS)

    Neville, J. P.

    1990-01-01

    One objective is to demonstrate the way crystals grow and how they affect the behavior of material. Another objective is to compare the growth of crystals in metals and nonmetals. The procedures, which involve a supersaturated solution of a salt that will separate into crystals on cooling and the pouring off of an eutectic solution to expose the crystals formed by a solid solution when an alloy of two metals forms a solid and eutectic solution on cooling, are described.

  14. Facility effluent monitoring

    SciTech Connect

    Gleckler, B.P.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the facility effluent monitoring programs and provides an evaluation of effluent monitoring data. These evaluations are useful in assessing the effectiveness of effluent treatment and control systems, as well as management practices.

  15. Quality of effluents from Hattar Industrial Estate

    PubMed Central

    Sial, R.A.; Chaudhary, M.F.; Abbas, S.T.; Latif, M.I.; Khan, A.G.

    2006-01-01

    Of 6634 registered industries in Pakistan, 1228 are considered to be highly polluting. The major industries include textile, pharmaceutical, chemicals (organic and inorganic), food industries, ceramics, steel, oil mills and leather tanning which spread all over four provinces, with the larger number located in Sindh and Punjab, with smaller number in North Western Frontier Province (NWFP) and Baluchistan. Hattar Industrial Estate extending over 700 acres located in Haripur district of NWFP is a new industrial estate, which has been developed with proper planning for management of industrial effluents. The major industries located in Hattar are ghee industry, chemical (sulfuric acid, synthetic fiber) industry, textile industry and pharmaceuticals industry. These industries, although developed with proper planning are discharging their effluents in the nearby natural drains and ultimately collected in a big drain near Wah. The farmers in the vicinity are using these effluents for growing vegetables and cereal crops due to shortage of water. In view of this discussion, there is a dire need to determine if these effluents are hazardous for soil and plant growth. So, effluents from different industries, sewage and normal tap water samples were collected and analysed for pH, electrical conductivity (EC), total soluble salts (TSS), biological oxygen demand (BOD), chemical oxygen demand (COD), total nitrogen, cations and anions and heavy metals. The effluents of ghee and textile industries are highly alkaline. EC and TSS loads of ghee and textile industries are also above the National Environmental Quality Standards (NEQS), Pakistan. All the effluents had residual sodium carbonates (RSCs), carbonates and bicarbonates in amounts that cannot be used for irrigation. Total toxic metals load in all the effluents is also above the limit i.e. 2.0 mg/L. Copper in effluents of textile and sewage, manganese in ghee industry effluents and iron contents in all the effluents were

  16. Ammonium removal from anaerobically treated effluent by Chlamydomonas acidophila.

    PubMed

    Escudero, Ania; Blanco, Fernando; Lacalle, Arrate; Pinto, Miriam

    2014-02-01

    Several batch culture studies were carried out to evaluate an anaerobically treated effluent as a low-cost growth medium for the microalga Chlamydomonas acidophila and to study the effectiveness of the microalga in removing NH4-N from the effluent. An initial decrease in the effluent pH to 3 was required for adequate growth of C. acidophila and removal of NH4-N. Growth of the microalgae was inhibited at high light intensity (224μmolphotonsm(-2)s(-1) at the surface of the vessels). However, the growth was not greatly affected by the high solid content and turbidity of the effluent. The microalga was able to grow in media containing NH4-N at concentrations of up to 1000mgL(-1) (50% of effluent) and to remove 88mg of NH4-NL(-1) in 10days. C. acidophila therefore appears a promising agent for the removal of NH4-N from anaerobically treated effluents.

  17. Declining Segregation through the Lens of Neighborhood Quality: Does Middle-Class and Affluent Status Bring Equality?

    PubMed Central

    Friedman, Samantha; Gibbons, Joseph; Galvan, Chris

    2014-01-01

    Middle- and upper-class status along with suburban residence are together considered symbolic of the American dream. However, the question of whether they mean access to better quality residential environments has gone largely unexplored. This study relies on data from the 2009 panel of the American Housing Survey and focuses on a range of neighborhood conditions, including indicators of physical and social disorder as well as housing value and a neighborhood rating. Contrary to the tenets of the spatial assimilation model, we find that middle-class and affluent status do not consistently lead to superior conditions for all households. Neighborhood circumstances vary considerably based on householder race and ethnicity, with blacks and Hispanics experiencing the greatest disparities from whites. In addition, suburban residence does not attenuate such differences, and in some cases, well-to-do minorities do even worse than whites in neighborhood quality in suburbs. PMID:24767597

  18. Declining segregation through the lens of neighborhood quality: does middle-class and affluent status bring equality?

    PubMed

    Friedman, Samantha; Gibbons, Joseph; Galvan, Chris

    2014-07-01

    Middle- and upper-class status along with suburban residence are together considered symbolic of the American dream. However, the question of whether they mean access to better quality residential environments has gone largely unexplored. This study relies on data from the 2009 panel of the American Housing Survey and focuses on a range of neighborhood conditions, including indicators of physical and social disorder as well as housing value and a neighborhood rating. Contrary to the tenets of the spatial assimilation model, we find that middle-class and affluent status do not consistently lead to superior conditions for all households. Neighborhood circumstances vary considerably based on householder race and ethnicity, with blacks and Hispanics experiencing the greatest disparities from whites. In addition, suburban residence does not attenuate such differences, and in some cases, well-to-do minorities do even worse than whites in neighborhood quality in suburbs.

  19. Declining segregation through the lens of neighborhood quality: does middle-class and affluent status bring equality?

    PubMed

    Friedman, Samantha; Gibbons, Joseph; Galvan, Chris

    2014-07-01

    Middle- and upper-class status along with suburban residence are together considered symbolic of the American dream. However, the question of whether they mean access to better quality residential environments has gone largely unexplored. This study relies on data from the 2009 panel of the American Housing Survey and focuses on a range of neighborhood conditions, including indicators of physical and social disorder as well as housing value and a neighborhood rating. Contrary to the tenets of the spatial assimilation model, we find that middle-class and affluent status do not consistently lead to superior conditions for all households. Neighborhood circumstances vary considerably based on householder race and ethnicity, with blacks and Hispanics experiencing the greatest disparities from whites. In addition, suburban residence does not attenuate such differences, and in some cases, well-to-do minorities do even worse than whites in neighborhood quality in suburbs. PMID:24767597

  20. A Preliminary Report on Motivation and Communication Patterns of the Black, Chicano, White, and Affluent White in a Typical Southwest U.S. City.

    ERIC Educational Resources Information Center

    Hsia, H. J.

    Motivation and aspiration for a better life can be examined in relation to media behavior of random samples of the blacks, Chicanos, whites, and affluent whites in Lubbock, Texas. In such a study, no significant difference in motivation and aspiration, as influenced by media, can be found among ethnic and other groups. This phenomenon is likely…

  1. INEEL Liquid Effluent Inventory

    SciTech Connect

    Major, C.A.

    1997-06-01

    The INEEL contractors and their associated facilities are required to identify all liquid effluent discharges that may impact the environment at the INEEL. This liquid effluent information is then placed in the Liquid Effluent Inventory (LEI) database, which is maintained by the INEEL prime contractor. The purpose of the LEI is to identify and maintain a current listing of all liquid effluent discharge points and to identify which discharges are subject to federal, state, or local permitting or reporting requirements and DOE order requirements. Initial characterization, which represents most of the INEEL liquid effluents, has been performed, and additional characterization may be required in the future to meet regulations. LEI information is made available to persons responsible for or concerned with INEEL compliance with liquid effluent permitting or reporting requirements, such as the National Pollutant Discharge Elimination System, Wastewater Land Application, Storm Water Pollution Prevention, Spill Prevention Control and Countermeasures, and Industrial Wastewater Pretreatment. The State of Idaho Environmental Oversight and Monitoring Program also needs the information for tracking liquid effluent discharges at the INEEL. The information provides a baseline from which future liquid discharges can be identified, characterized, and regulated, if appropriate. The review covered new and removed buildings/structures, buildings/structures which most likely had new, relocated, or removed LEI discharge points, and at least 10% of the remaining discharge points.

  2. Metal bioremediation through growing cells.

    PubMed

    Malik, Anushree

    2004-04-01

    Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. Metal remediation through common physico-chemical techniques is expensive and unsuitable in case of voluminous effluents containing complexing organic matter and low metal contamination. Biotechnological approaches that are designed to cover such niches have, therefore, received great deal of attention in the recent years. Biosorption studies involving low-cost and often dead/pretreated biomass have dominated the literature and, subsequently, extensive reviews focusing on equilibrium and kinetics of metal biosorption have also come up. However, the low binding capacity of biomass for certain recalcitrant metals such as Ni and failure to effectively remove metals from real industrial effluents due to presence of organic or inorganic ligands limit this approach. At times, when pure biosorptive metal removal is not feasible, application of a judicious consortium of growing metal-resistant cells can ensure better removal through a combination of bioprecipitation, biosorption and continuous metabolic uptake of metals after physical adsorption. Such approach may lead to simultaneous removal of toxic metals, organic loads and other inorganic impurities, as well as allow optimization through development of resistant species. However, sensitivity of living cells to extremes of pH or high metal concentration and need to furnish metabolic energy are some of the major constraints of employing growing cells for bioremediation. The efforts to meet such challenges via isolation of metal-resistant bacterial/fungal strains and exploitation of organic wastes as carbon substrates have began. Recent studies show that the strains (bacteria, yeast and fungi) isolated from contaminated sites possess excellent capability of metal scavenging. Some bacterial strains possess high tolerance to

  3. Estimating effluent COD

    SciTech Connect

    Eckenfelder, W.W.; Landine, R.

    1995-06-01

    In many parts of the world, chemical oxygen demand (COD) is a primary effluent parameter. Unlike BOD, which considers only biodegradable organics, COD also includes non-degradable organics and non-degradable biological oxidation by-products, generally referred to as soluble microbial products (SMP). The SMP can vary from 2% to 10% of the influent degradable COD. If the technology is limited to biological treatment only, the degradable COD will be removed. Further reductions in COD will require physical chemical treatments such as activated carbon. Effluent COD values for several industrial wastewaters are presented. Effluent characteristics from the anaerobic treatment of industrial wastewaters are also discussed.

  4. Nuclear reactor effluent monitoring

    SciTech Connect

    Minns, J.L.; Essig, T.H.

    1993-12-31

    Radiological environmental monitoring and effluent monitoring at nuclear power plants is important both for normal operations, as well as in the event of an accident. During normal operations, environmental monitoring verifies the effectiveness of in-plant measures for controlling the release of radioactive materials in the plant. Following an accident, it would be an additional mechanism for estimating doses to members of the general public. This paper identifies the U.S. Nuclear Regulatory Commission (NRC) regulatory basis for requiring radiological environmental and effluent monitoring, licensee conditions for effluent and environmental monitoring, NRC independent oversight activities, and NRC`s program results.

  5. NATIONAL WWTP EFFLUENT STUDY

    EPA Science Inventory

    Reports of potential wildlife risk from exposure to environmental estrogens emphasize the need to better understand both estrogenic presence and persistence in treated wastewater effluents. In addition to wildlife exposure, human exposure should also be examined, especially in si...

  6. Genotoxicity of swine effluents.

    PubMed

    Techio, V H; Stolberg, J; Kunz, A; Zanin, E; Perdomo, C C

    2011-01-01

    This study aimed at the investigation of genotoxic effects of swine effluents from different stages of a treatment system for swine wastes through bioassay of stamen hairs and micronuclei in Tradescantia (clone BNL 4430). No significant differences (p≥0.05) regarding the genic mutations were found in the bioassay of stamen hairs, independently of the effluent analysed. For the genotoxicity test with micronuclei, the plants exposed to raw wastes, to sludge, and to effluent of the biodigester have presented higher rates of chromosomal damages (micronuclei), with significant differences in relation to the control group and other effluent of the waste treatment system (p≤0.05). The association between the chemical parameters and the genotoxicity data have shown that the variables COD and TKN have presented significant correlation (p≤0.05) with the number of mutagenic events in the tetrads.

  7. Growing and Growing: Promoting Functional Thinking with Geometric Growing Patterns

    ERIC Educational Resources Information Center

    Markworth, Kimberly A.

    2010-01-01

    Design research methodology is used in this study to develop an empirically-substantiated instruction theory about students' development of functional thinking in the context of geometric growing patterns. The two research questions are: (1) How does students' functional thinking develop in the context of geometric growing patterns? (2) What are…

  8. Waste treatment of kraft effluents by white-rot fungi

    SciTech Connect

    Kondo, R.

    1996-10-01

    The residual lignin in unbleached kraft pulp is commonly removed to afford a fully bleached pulp through a multi-stage bleaching process consisting of chlorination and alkaline-extraction stages. The effluent from such a bleaching process is of growing environmental concern because it shows a dark brown color and contains numerous chlorinated organic substances. Moreover, this effluent is not easily recycled within a mill recovery system because of the potential corrosion problems created by its high chlorine content. White-rot fungi have even heavily modified lignin such as kraft lignin and atoms demonstrated that kraft bleaching effluent can be rot fungi, in particular, Trametes versicolor and this review lecture, the possibility of the application of kraft effluents will be discussed.

  9. Far-field model of the regional influence of affluent plumes from Ocean Thermal Energy Conversion (OTEC) plants

    NASA Astrophysics Data System (ADS)

    Wang, D. P.

    1985-07-01

    Ocean thermal energy conversion (OTEC) plants discharge large volumes of cold water into the upper ocean. A three-dimensional, limited-area model was developed to investigate the regional influence of the far-field effluent plume created by the negatively buoyant discharge. The model was applied to discharges from a 40-MW sub e OTEC plant into coastal waters characterized by various ambient ocean conditions. A typical ambient temperature structure and nutrient distribution, as well as the behavior of the effluent plume itself, were strongly modified by the discharge-induced circulation. Although temperature perturbations in the plume were small, upward entrainment of nutrients from below the thermocline was significant. The regional influence of discharges from an 80-MW sub e OTEC plant, the interactions between the discharges from two adjacent 40-MW sub e OTEC plants, and the effects of coastal boundary and bottom discharge were examined with respect to the regional influence of a 40-MW sub e OTEC plant located in deep water off a coast (base case).

  10. Silage effluent management: a review.

    PubMed

    Gebrehanna, M M; Gordon, R J; Madani, A; VanderZaag, A C; Wood, J D

    2014-10-01

    Silage effluent is a potent wastewater that can be produced when ensiling crops that have a high moisture content (MC). Silage effluent can cause fish-kills and eutrophication due to its high biochemical oxygen demand (BOD) and nutrient content, respectively. It has a high acidity (pH ≈ 3.5-5) making it corrosive to steel and damaging to concrete, which makes handling, storage and disposal a challenge. Although being recognized as a concentrated wastewater, most research has focused on preventing its production. Despite noted imprecision in effluent production models-and therefore limited ability to predict when effluent will flow-there has been little research aimed at identifying effective reactive management options, such as containment and natural treatment systems. Increasing climate variability and intensifying livestock agriculture are issues that will place a greater importance on developing comprehensive, multi-layered management strategies that include both preventative and reactive measures. This paper reviews important factors governing the production of effluent, approaches to minimize effluent flows as well as treatment and disposal options. The challenges of managing silage effluent are reviewed in the context of its chemical constituents. A multi-faceted approach should be utilized to minimize environmental risks associated with silage effluent. This includes: (i) managing crop moisture content prior to ensiling to reduce effluent production, (ii) ensuring the integrity of silos and effluent storages, and (iii) establishing infrastructure for effluent treatment and disposal. A more thorough investigation of constructed wetlands and vegetated infiltration areas for treating dilute silage effluent is needed. In particular, there should be efforts to improve natural treatment system design criteria by identifying pre-treatment processes and appropriate effluent loading rates. There is also a need for research aimed at understanding the effects of

  11. Ammonium removal from anaerobically treated effluent by Chlamydomonas acidophila.

    PubMed

    Escudero, Ania; Blanco, Fernando; Lacalle, Arrate; Pinto, Miriam

    2014-02-01

    Several batch culture studies were carried out to evaluate an anaerobically treated effluent as a low-cost growth medium for the microalga Chlamydomonas acidophila and to study the effectiveness of the microalga in removing NH4-N from the effluent. An initial decrease in the effluent pH to 3 was required for adequate growth of C. acidophila and removal of NH4-N. Growth of the microalgae was inhibited at high light intensity (224μmolphotonsm(-2)s(-1) at the surface of the vessels). However, the growth was not greatly affected by the high solid content and turbidity of the effluent. The microalga was able to grow in media containing NH4-N at concentrations of up to 1000mgL(-1) (50% of effluent) and to remove 88mg of NH4-NL(-1) in 10days. C. acidophila therefore appears a promising agent for the removal of NH4-N from anaerobically treated effluents. PMID:24342946

  12. Assessment of industrial effluent and its impact on soil and plants.

    PubMed

    Barman, S C; Kisku, G C; Salve, P R; Misra, D; Sahu, R K; Ramteke, P W; Bhargava, S K

    2001-10-01

    The present study deals with the assessment of industrial water of an electronic component manufacturing unit with electroplating and its subsequent effects on soil and plants receiving the effluent. The physico-chemical parameters of the effluent samples showed higher value than that of ground water. The treated effluent was within the permissible limit. Microtox test was conducted and determined the degree of toxicity of untreated, treated effluents as well as the water sample collected at effluent discharge point of receiving river (confluence point). The physico- mechanical parameters of the soil samples were not changed due to irrigation of the treated effluent, but the concentration of metals were comparatively higher than the control soil. Higher accumulation of metals was found in the plant parts in naturally growing weeds and cultivated crop plant irrigated with treated effluent. Elevated accumulation of metals in Eichhornia crassipes and Marsilea sp. growing along the effluent channel has been identified as a potential source of biomonitoring of metals particularly for Cu and Ca and can be utilised for the removal of heavy metal from wastewater. PMID:12018593

  13. "Nobody's Rich and Nobody's Poor … It Sounds Good, but It's Actually Not": Affluent Students Learning Mathematics and Social Justice

    ERIC Educational Resources Information Center

    Esmonde, Indigo

    2014-01-01

    This article investigates how affluent students made sense of social justice issues that were embedded in mathematics learning activities. I present 2 case studies of such activities at the intermediate and secondary levels in 2 different schools. The analysis draws on video records and classroom artifacts and applies the theoretical framework of…

  14. Apparatus for growing crystals

    NASA Technical Reports Server (NTRS)

    Jasinski, Thomas J. (Inventor); Witt, August F. (Inventor)

    1986-01-01

    An improved apparatus and method for growing crystals from a melt employing a heat pipe, consisting of one or more sections, each section serving to control temperature and thermal gradients in the crystal as it forms inside the pipe.

  15. How Your Baby Grows

    MedlinePlus

    ... brain, the heart and lungs, are forming. The placenta grows in your uterus and supplies the baby ... like alcohol, cigarette smoke and drugs through the placenta, too. So don’t drink alcohol , smoke , use ...

  16. Liquid Effluent Retention Facility/Effluent Treatment Facility Hazards Assessment

    SciTech Connect

    Simiele, G.A.

    1994-09-29

    This document establishes the technical basis in support of Emergency Planning activities for the Liquid Effluent Retention Facility and Effluent Treatment Facility the Hanford Site. The document represents an acceptable interpretation of the implementing guidance document for DOE ORDER 5500.3A. Through this document, the technical basis for the development of facility specific Emergency Action Levels and the Emergency Planning Zone is demonstrated.

  17. Obesity and Poverty: A Growing Challenge

    ERIC Educational Resources Information Center

    Daniels, Dianne Yow; Queen, J. Allen; Schumacher, Donald

    2007-01-01

    This research study addresses the childhood obesity epidemic, which has seen the number of overweight children from the ages of 6 to 11 triple since the mid-1970s. The authors note that there are more than twice as many poor and obese adolescents compared with more affluent youths, and examine a number of factors linking obesity and poverty.…

  18. Facility effluent monitoring plan for WESF

    SciTech Connect

    SIMMONS, F.M.

    1999-09-01

    The FEMP for the Waste Encapsulation and Storage Facility (WESF) provides sufficient information on the WESF effluent characteristics and the effluent monitoring systems so that a compliance assessment against applicable requirements may be performed. Radioactive and hazardous material source terms are related to specific effluent streams that are in turn, related to discharge points and, finally are compared to the effluent monitoring system capability.

  19. Role of livestock effluent suspended particulate in sealing effluent ponds.

    PubMed

    Bennett, J McL; Warren, B R

    2015-05-01

    Intensive livestock feed-lots have become more prevalent in recent years to help in meeting the predicted food production targets based on expected population growth. Effluent from these is stored in ponds, representing a potential concern for seepage and contamination of groundwater. Whilst previous literature suggests that effluent particulate can limit seepage adequately in combination with a clay liner, this research addresses potential concerns for sealing of ponds with low concentration fine and then evaluates this against proposed filter-cake based methodologies to describe and predict hydraulic reduction. Short soil cores were compacted to 98% of the maximum dry density and subject to ponded head percolation with unfiltered-sediment-reduced effluent, effluent filtered to <3 μm, and chemically synthesized effluent. Reduction in hydraulic conductivity was observed to be primarily due to the colloidal fraction of the effluent, with larger particulate fractions providing minimal further reduction. Pond sealing was shown to follow mathematical models of filter-cake formation, but without the formation of a physical seal on top of the soil surface. Management considerations based on the results are presented.

  20. Dairy shed effluent treatment and recycling: Effluent characteristics and performance.

    PubMed

    Fyfe, Julian; Hagare, Dharma; Sivakumar, Muttucumaru

    2016-09-15

    Dairy farm milking operations produce considerable amounts of carbon- and nutrient-rich effluent that can be a vital source of nutrients for pasture and crops. The study aim was to characterise dairy shed effluent from a commercial farm and examine the changes produced by treatment, storage and recycling of the effluent through a two-stage stabilisation pond system. The data and insights from the study are broadly applicable to passive pond systems servicing intensive dairy and other livestock operations. Raw effluent contained mostly poorly biodegradable particulate organic material and organically bound nutrients, as well as a large fraction of fixed solids due to effluent recycling. The anaerobic pond provided effective sedimentation and biological treatment, but hydrolysis of organic material occurred predominantly in the sludge and continually added to effluent soluble COD, nutrients and cations. Sludge digestion also suppressed pH in the pond and increased salt levels through formation of alkalinity. High sludge levels significantly impaired pond treatment performance. In the facultative pond, BOD5 concentrations were halved; however smaller reductions in COD showed the refractory nature of incoming organic material. Reductions in soluble N and P were proportional to reductions in respective particulate forms, suggesting that respective removal mechanisms were not independent. Conditions in the ponds were unlikely to support biological nutrient removal. Recycling caused conservative inert constituents to accumulate within the pond system. Material leaving the system was mostly soluble (86% TS) and inert (65% TS), but salt concentrations remained below thresholds for safe land application. PMID:27213866

  1. Radiation treatment of municipal effluent

    NASA Astrophysics Data System (ADS)

    Sawai, Teruko; Sekiguchi, Masayuki; Shimokawa, Toshinari; Sawai, Takeshi

    1993-10-01

    The recycling of municipal wastewater is an effective means of coping with the water shortage in Tokyo. After irradiation, the refractory organic substances in wastewater were decomposed. COD, light brown color, offensive odor and foaminess in the effluents were reduced with increasing dose. Inactivation efficiencies (D 10) of six microorganisms added to the secondary effluents and return sludge supernatant by irradiation were investigated. The survival curves of total bacteria, total coliforms and enterococci in the secondary effluents were compared. The number of total coliforms exponentially decreased with increasing dose and fell to undetectable levels at 0.5 kGy. The elimination of suspended solids in the secondary effluents is effective in diminishing the dose required to disinfect and prevent bacteria regrowth.

  2. Characteristics of treated effluents and their potential applications for producing concrete.

    PubMed

    Noruzman, Ainul Haezah; Muhammad, Bala; Ismail, Mohammad; Abdul-Majid, Zaiton

    2012-11-15

    Conservation and preservation of freshwater is increasingly becoming important as the global population grows. Presently, enormous volumes of freshwater are used to mix concrete. This paper reports experimental findings regarding the feasibility of using treated effluents as alternatives to freshwater in mixing concrete. Samples were obtained from three effluent sources: heavy industry, a palm-oil mill and domestic sewage. The effluents were discharge into public drain without danger to human health and natural environment. Chemical compositions and physical properties of the treated effluents were investigated. Fifteen compositional properties of each effluent were correlated with the requirements set out by the relevant standards. Concrete mixes were prepared using the effluents and freshwater to establish a base for control performance. The concrete samples were evaluated with regard to setting time, workability, compressive strength and permeability. The results show that except for some slight excesses in total solids and pH, the properties of the effluents satisfy the recommended disposal requirements. Two concrete samples performed well for all of the properties investigated. In fact, one sample was comparatively better in compressive strength than the normal concrete; a 9.4% increase was observed at the end of the curing period. Indeed, in addition to environmental conservation, the use of treated effluents as alternatives to freshwater for mixing concrete could save a large amount of freshwater, especially in arid zones.

  3. Growing Plants in School.

    ERIC Educational Resources Information Center

    Salt, Bernard

    1990-01-01

    Background information on the methods and varieties used to demonstrate the cultivation of plants without the use of chemical pesticides is provided. Discussed are species and variety selection, growing plants from seed and from seedlings, soil preparation, using cuttings, useful crops, and pest control. (CW)

  4. GROWING SEEDS, TEACHER'S GUIDE.

    ERIC Educational Resources Information Center

    Elementary Science Study, Newton, MA.

    THIS TEACHER'S GUIDE IS DESIGNED FOR USE WITH AN ELEMENTARY SCIENCE STUDY UNIT, "GROWING SEEDS," IN WHICH SUCH BASIC SCIENCE SKILLS AND PROCESSES AS MEASUREMENT, OBSERVATION, AND HYPOTHESIS FORMATION ARE INTRODUCED THROUGH STUDENT ACTIVITIES INVOLVING SEEDS, GERMINATION, AND SEEDLING GROWTH. THE MATERIALS WERE DEVELOPED FOR USE IN ELEMENTARY…

  5. Growing Up with "1984."

    ERIC Educational Resources Information Center

    Franza, August

    1983-01-01

    Relates changing student reaction to George Orwell's "1984" over 20 years of teaching. Finds present high school students' acceptance of Orwell's bleak world vision both a sign of student honesty and a frightening indication of the growing reality of the book. (MM)

  6. Growing Backyard Textiles

    ERIC Educational Resources Information Center

    Nelson, Eleanor Hall

    1975-01-01

    For those involved in creative work with textiles, the degree of control possible in texture, finish, and color of fiber by growing and processing one's own (perhaps with students' help) can make the experience rewarding. The author describes the processes for flax and nettles and gives tips on necessary equipment. (Author/AJ)

  7. Growing through Literature.

    ERIC Educational Resources Information Center

    Thomas, Barbara J.

    "Growing through Literature" is a curriculum using Joan M. and Erik H. Erikson's theory of the Life Cycle as a structure for selecting and teaching literature to inner-city high school students at Brighton High School in Massachusetts. The program consists of four component parts: Journals, Selected Stories, Discussion, and Autobiography. By…

  8. And Away We Grow!

    ERIC Educational Resources Information Center

    Zeece, Pauline Davey

    1994-01-01

    Notes the difficulty of developing and managing a child care business well. Describes Sharlit and McConnell's (1989) five-phase model of business growth as it might apply to a growing child care program. The phases of development described are creativity; direction; delegation; coordination; and collaboration. (TJQ)

  9. A Growing Phenomenon.

    ERIC Educational Resources Information Center

    Gwynn, Mary Loleta

    1988-01-01

    Describes the "Grow Lab" program which is sponsored by the National Gardening Association. Discusses how eight square feet of classroom space are converted into a mini-ecosystem. Mentions the development of a curriculum guide to accompany the indoor garden. (TW)

  10. 40 CFR 471.66 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Titanium Forming Subcategory § 471.66 Effluent limitations representing the degree of effluent...

  11. 40 CFR 471.86 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Zinc Forming Subcategory § 471.86 Effluent limitations representing the degree of effluent reduction...

  12. 40 CFR 471.26 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Magnesium Forming Subcategory § 471.26 Effluent limitations representing the degree of effluent...

  13. 40 CFR 471.76 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Uranium Forming Subcategory § 471.76 Effluent limitations representing the degree of effluent reduction...

  14. 40 CFR 471.76 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Uranium Forming Subcategory § 471.76 Effluent limitations representing the degree of effluent reduction...

  15. 40 CFR 471.86 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Zinc Forming Subcategory § 471.86 Effluent limitations representing the degree of effluent reduction...

  16. 40 CFR 471.26 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Magnesium Forming Subcategory § 471.26 Effluent limitations representing the degree of effluent...

  17. 40 CFR 471.66 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Titanium Forming Subcategory § 471.66 Effluent limitations representing the degree of effluent...

  18. 40 CFR 409.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar... beet sugar processing operation. Effluent characteristic Effluent limitations Maximum for any 1...

  19. 40 CFR 409.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar... beet sugar processing operation. Effluent characteristic Effluent limitations Maximum for any 1...

  20. 40 CFR 409.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar... beet sugar processing operation. Effluent characteristic Effluent limitations Maximum for any 1...

  1. 40 CFR 409.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar... beet sugar processing operation. Effluent characteristic Effluent limitations Maximum for any 1...

  2. 40 CFR 409.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar... beet sugar processing operation. Effluent characteristic Effluent limitations Maximum for any 1...

  3. 40 CFR 464.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Aluminum Casting Subcategory § 464.17 Effluent limitations guidelines representing the degree of effluent...

  4. 40 CFR 428.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.42 Effluent limitations guidelines representing the degree of effluent...

  5. 40 CFR 428.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.43 Effluent limitations guidelines representing the degree of effluent...

  6. 40 CFR 428.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.43 Effluent limitations guidelines representing the degree of effluent...

  7. 40 CFR 428.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.33 Effluent limitations guidelines representing the degree of effluent...

  8. 40 CFR 428.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.43 Effluent limitations guidelines representing the degree of effluent...

  9. 40 CFR 428.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.23 Effluent limitations guidelines representing the degree of effluent...

  10. 40 CFR 428.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.23 Effluent limitations guidelines representing the degree of effluent...

  11. 40 CFR 428.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.33 Effluent limitations guidelines representing the degree of effluent...

  12. 40 CFR 428.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.42 Effluent limitations guidelines representing the degree of effluent...

  13. 40 CFR 440.115 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.115 Effluent limitations representing the degree of effluent...

  14. 40 CFR 440.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.112 Effluent limitations representing the degree of effluent...

  15. 40 CFR 440.115 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.115 Effluent limitations representing the degree of effluent...

  16. 40 CFR 440.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.112 Effluent limitations representing the degree of effluent...

  17. 40 CFR 440.92 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.92 Effluent limitations representing the degree of effluent...

  18. 40 CFR 440.35 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.35 Effluent limitations representing the degree of effluent...

  19. 40 CFR 440.115 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.115 Effluent limitations representing the degree of effluent...

  20. 40 CFR 440.92 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.92 Effluent limitations representing the degree of effluent...

  1. 40 CFR 440.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.112 Effluent limitations representing the degree of effluent...

  2. 40 CFR 440.92 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.92 Effluent limitations representing the degree of effluent...

  3. Are the affluent prepared to pay for the planet? Explaining willingness to pay for public and quasi-private environmental goods in Switzerland

    PubMed Central

    Liebe, Ulf

    2010-01-01

    A large number of ‘environmental justice’ studies show that wealthier people are less affected by environmental burdens and also consume more resources than poorer people. Given this double inequity, we ask, to what extent are affluent people prepared to pay to protect the environment? The analyses are couched within the compensation/affluence hypothesis, which states that wealthier persons are able to spend more for environmental protection than their poorer counterparts. Further, we take into account various competing economic, psychological and sociological determinants of individuals’ willingness to pay (WTP) for both public environmental goods (e.g., general environmental protection) and quasi-private environmental goods (e.g., CO2-neutral cars). Such a comprehensive approach contrasts with most other studies in this field that focus on a limited number of determinants and goods. Multivariate analyses are based on a general population survey in Switzerland (N = 3,369). Although income has a positive and significant effect on WTP supporting the compensation hypothesis, determinants such as generalized interpersonal trust that is assumed to be positively associated with civic engagement and environmental concern prove to be equally important. Moreover, we demonstrate for the first time that time preferences can considerably influence survey-based WTP for environmental goods; since investments in the environment typically pay off in the distant future, persons with a high subjective discount rate are less likely to commit. PMID:20835384

  4. Macromolecular crystal growing system

    NASA Technical Reports Server (NTRS)

    Snyder, Robert S. (Inventor); Herren, Blair J. (Inventor); Carter, Daniel C. (Inventor); Yost, Vaughn H. (Inventor); Bugg, Charles E. (Inventor); Delucas, Lawrence J. (Inventor); Suddath, Fred L. (Inventor)

    1991-01-01

    A macromolecular crystal growing system especially designed for growing crystals in the low gravity of space as well as the gravity of earth includes at least one tray assembly, a carrier assembly which receives the tray, and a refrigeration-incubation module in which the carrier assembly is received. The tray assembly includes a plurality of sealed chambers with a plastic syringe and a plug means for the double tip of the syringe provided therein. Ganging mechanisms operate the syringes and plugs simultaneously in a precise and smooth operation. Preferably, the tray assemblies are mounted on ball bearing slides for smooth operation in inserting and removing the tray assemblies into the carrier assembly. The plugging mechanism also includes a loading control mechanism. A mechanism for leaving a syringe unplugged is also provided.

  5. Growing up with Retinoblastoma

    ERIC Educational Resources Information Center

    Maley, Tom

    2005-01-01

    An account is given of growing up as a child blinded as a result of a cancer of the eye known as retinoblastoma. The role of his mother is brought out, variously as a source of objective knowledge, of one's personal worth, and of the worth of other people in one's community. The strengths and weaknesses of his first school in his home area and…

  6. How to grow tomatoes.

    PubMed

    Kimura, Seisuke; Sinha, Neelima

    2008-11-01

    INTRODUCTIONTomatoes can be easily grown in a field, in a greenhouse, or in a growth cabinet. They need acidic soil (pH 6.0-6.8), a lot of light, and water. The optimum temperature for growing tomato plants and fruit is 18°C-24°C. This protocol describes how to germinate tomato seeds, cultivate adult plants, and harvest seeds from fruit.

  7. 40 CFR 417.163 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Detergents Subcategory § 417.163 Effluent limitations guidelines representing the degree... detergent operations the following values pertain: Effluent characteristic Effluent limitations Maximum...

  8. 40 CFR 417.163 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Detergents Subcategory § 417.163 Effluent limitations guidelines representing the degree... detergent operations the following values pertain: Effluent characteristic Effluent limitations Maximum...

  9. 40 CFR 417.163 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Detergents Subcategory § 417.163 Effluent limitations guidelines representing the degree... detergent operations the following values pertain: Effluent characteristic Effluent limitations Maximum...

  10. 40 CFR 455.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Chemicals Manufacturing Subcategory § 455.22 Effluent limitations guidelines representing the degree of... shall achieve the following effluent limitations representing the degree of effluent...

  11. Pit latrine effluent infiltration into groundwater: the Epworth case study.

    PubMed

    Chidavaenzi, M; Bradley, M; Jere, M; Nhandara, C

    2000-01-01

    Water can be a vehicle for the transmission of communicable diseases. Technologies have been developed to protect groundwater from external surface contamination. However, there is growing concern about the likelihood of pit latrine effluent infiltrating into groundwater reservoirs for well water supply systems. Investigations on seasonal variations and extent of pit latrine effluent infiltration into soil and groundwater have been carried out in Zimbabwe. Preliminary results show that groundwater flows in the direction of surface runoff, and that there is no lateral soil pollution above the groundwater surface. Pit latrine contents leach downwards and down slopes for distances that vary per season and soil type. The results also demonstrate the contribution of refuse pits and water collection methods to groundwater pollution.

  12. Growing Unculturable Bacteria

    PubMed Central

    2012-01-01

    The bacteria that can be grown in the laboratory are only a small fraction of the total diversity that exists in nature. At all levels of bacterial phylogeny, uncultured clades that do not grow on standard media are playing critical roles in cycling carbon, nitrogen, and other elements, synthesizing novel natural products, and impacting the surrounding organisms and environment. While molecular techniques, such as metagenomic sequencing, can provide some information independent of our ability to culture these organisms, it is essentially impossible to learn new gene and pathway functions from pure sequence data. A true understanding of the physiology of these bacteria and their roles in ecology, host health, and natural product production requires their cultivation in the laboratory. Recent advances in growing these species include coculture with other bacteria, recreating the environment in the laboratory, and combining these approaches with microcultivation technology to increase throughput and access rare species. These studies are unraveling the molecular mechanisms of unculturability and are identifying growth factors that promote the growth of previously unculturable organisms. This minireview summarizes the recent discoveries in this area and discusses the potential future of the field. PMID:22661685

  13. Nonlinear growing neutrino cosmology

    NASA Astrophysics Data System (ADS)

    Ayaita, Youness; Baldi, Marco; Führer, Florian; Puchwein, Ewald; Wetterich, Christof

    2016-03-01

    The energy scale of dark energy, ˜2 ×10-3 eV , is a long way off compared to all known fundamental scales—except for the neutrino masses. If dark energy is dynamical and couples to neutrinos, this is no longer a coincidence. The time at which dark energy starts to behave as an effective cosmological constant can be linked to the time at which the cosmic neutrinos become nonrelativistic. This naturally places the onset of the Universe's accelerated expansion in recent cosmic history, addressing the why-now problem of dark energy. We show that these mechanisms indeed work in the growing neutrino quintessence model—even if the fully nonlinear structure formation and backreaction are taken into account, which were previously suspected of spoiling the cosmological evolution. The attractive force between neutrinos arising from their coupling to dark energy grows as large as 106 times the gravitational strength. This induces very rapid dynamics of neutrino fluctuations which are nonlinear at redshift z ≈2 . Nevertheless, a nonlinear stabilization phenomenon ensures only mildly nonlinear oscillating neutrino overdensities with a large-scale gravitational potential substantially smaller than that of cold dark matter perturbations. Depending on model parameters, the signals of large-scale neutrino lumps may render the cosmic neutrino background observable.

  14. Sleep to grow smart?

    PubMed

    Volk, Carina; Huber, Reto

    2015-01-01

    Sleep is undisputable an essential part of our life, if we do not sleep enough we feel the consequences the next day. The importance of sleep for healthy brain functioning has been well studied in adults, but less is known for the role of sleep in the paediatric age. Childhood and adolescence is a critical phase for brain development. The increased need for sleep during this developmental phase fosters the growing recognition for a central role of sleep during development. In this review we summarize the findings that demonstrate a close relationship between sleep and brain maturation, discuss the consequences of insufficient sleep during childhood and adolescence and outline initial attempts that have been made in order to improve sleep in this age range. PMID:26742664

  15. Growing a market economy

    SciTech Connect

    Basu, N.; Pryor, R.J.

    1997-09-01

    This report presents a microsimulation model of a transition economy. Transition is defined as the process of moving from a state-enterprise economy to a market economy. The emphasis is on growing a market economy starting from basic microprinciples. The model described in this report extends and modifies the capabilities of Aspen, a new agent-based model that is being developed at Sandia National Laboratories on a massively parallel Paragon computer. Aspen is significantly different from traditional models of the economy. Aspen`s emphasis on disequilibrium growth paths, its analysis based on evolution and emergent behavior rather than on a mechanistic view of society, and its use of learning algorithms to simulate the behavior of some agents rather than an assumption of perfect rationality make this model well-suited for analyzing economic variables of interest from transition economies. Preliminary results from several runs of the model are included.

  16. Siliceous algal and bacterial stromatolites in hot spring and geyser effluents of yellowstone national park.

    PubMed

    Walter, M R; Bauld, J; Brock, T D

    1972-10-27

    Growing algal and bacterial stromatolites composed of nearly amorphous silica occur around hot springs and geysers in Yellowstone National Park, Wyoming. Some Precambrian stromatolites may be bacterial rather than algal, which has important implications in atmospheric evolution, since bacterial photo-synthesis does not release oxygen. Conophyton stromatolites were thought to have become extinct at the end of the Precambrian, but are still growing in hot spring effluents.

  17. Siliceous algal and bacterial stromatolites in hot spring and geyser effluents of yellowstone national park.

    PubMed

    Walter, M R; Bauld, J; Brock, T D

    1972-10-27

    Growing algal and bacterial stromatolites composed of nearly amorphous silica occur around hot springs and geysers in Yellowstone National Park, Wyoming. Some Precambrian stromatolites may be bacterial rather than algal, which has important implications in atmospheric evolution, since bacterial photo-synthesis does not release oxygen. Conophyton stromatolites were thought to have become extinct at the end of the Precambrian, but are still growing in hot spring effluents. PMID:17815363

  18. Activated charcoal filter counting for radioiodine effluent concentration determination in protein iodinations.

    PubMed

    Button, T M; Hamilton, R G

    1982-12-01

    Regulatory agencies have recently placed emphasis upon quantification of 125I released to the environment during protein iodinations at radioiodination facilities. This necessitates air sampling in order to determine the concentration of 125I in the effluent. Air sample trapping mechanisms generally employed are activated charcoal filters. Difficulty arises in quantifying the activity of 125I trapped because of the attenuation of the 125I decay photons by the charcoal. Evaluation of the activity incident upon commercially available filters using a scintillation detector and large detector source separation is considered here. It is demonstrated that the activity in the filter may be treated as an exponential distribution within an attentuating matrix. This treatment essentially adds a constant correction factor to the counting efficiency of a given geometry for a filter-affluent flow rate combination. Finally, it is shown that an approximation assuming a uniform distribution of activity produces a large error in correction factor to the counting efficiency for the filters examined. PMID:7152949

  19. Fungus-growing ants.

    PubMed

    Weber, N A

    1966-08-01

    Fungus-growing ants (Attini) are in reality unique fungus-culturing insects.There are several hundred species in some dozen genera, of which Acromyrmex and Atta are the conspicuous leaf-cutters. The center of their activities is the fungus garden, which is also the site of the queen and brood. The garden, in most species, is made from fresh green leaves or other vegetal material. The ants forage for this, forming distinct trails to the vegetation that is being harvested. The cut leaves or other substrate are brought into the nest and prepared for the fungus. Fresh leaves and flowers are cut into pieces a millimeter or two in diameter; the ants form them into a pulpy mass by pinching them with the mandibles and adding saliva. Anal droplets are deposited on the pieces, which are then forced into place in the garden. Planting of the fungus is accomplished by an ant's picking up tufts of the adjacent mycelium and dotting the surface of the new substrate with it. The combination of salivary and anal secretions, together with the constant care given by the ants, facilitates the growth of the ant fungus only, despite constant possibilities for contamination. When the ants are removed, alien fungi and other organisms flourish. A mature nest of Atta Sexdens may consist of 2000 chambers, some temporarily empty, some with refuse, and the remainder with fungus gardens. Thousands of kilograms of fresh leaves will have been used. A young laboratory colony of Atta cephalotes will use 1 kilogram of fresh leaves for one garden. The attines are the chief agents for introducing organic matter into the soil in tropical rain forests; this matter becomes the nucleus for a host of other organisms, including nematodes and arthropods, after it is discarded by the ants. One ant species cultures a yeast; all others grow a mycelium. In the higher species the mycelium forms clusters of inflated hyphae. Mycologists accept as valid two names for confirmed fruiting stages: Leucocoprinus ( or

  20. Growing for different ends.

    PubMed

    Catts, Oron; Zurr, Ionat

    2014-11-01

    Tissue engineering and regenerative biology are usually discussed in relation to biomedical research and applications. However, hand in hand with developments of this field in the biomedical context, other approaches and uses for non-medical ends have been explored. There is a growing interest in exploring spin off tissue engineering and regenerative biology technologies in areas such as consumer products, art and design. This paper outlines developments regarding in vitro meat and leather, actuators and bio-mechanic interfaces, speculative design and contemporary artistic practices. The authors draw on their extensive experience of using tissue engineering for non-medical ends to speculate about what lead to these applications and their possible future development and uses. Avoiding utopian and dystopian postures and using the notion of the contestable, this paper also mentions some philosophical and ethical consideration stemming from the use of non-medical approaches to tissue constructs. This article is part of a directed issue entitled: Regenerative Medicine: the challenge of translation.

  1. Growing for different ends.

    PubMed

    Catts, Oron; Zurr, Ionat

    2014-11-01

    Tissue engineering and regenerative biology are usually discussed in relation to biomedical research and applications. However, hand in hand with developments of this field in the biomedical context, other approaches and uses for non-medical ends have been explored. There is a growing interest in exploring spin off tissue engineering and regenerative biology technologies in areas such as consumer products, art and design. This paper outlines developments regarding in vitro meat and leather, actuators and bio-mechanic interfaces, speculative design and contemporary artistic practices. The authors draw on their extensive experience of using tissue engineering for non-medical ends to speculate about what lead to these applications and their possible future development and uses. Avoiding utopian and dystopian postures and using the notion of the contestable, this paper also mentions some philosophical and ethical consideration stemming from the use of non-medical approaches to tissue constructs. This article is part of a directed issue entitled: Regenerative Medicine: the challenge of translation. PMID:25286303

  2. Waste monitoring system for effluents

    SciTech Connect

    Macdonald, J.M.; Gomez, B.; Trujillo, L.; Malcom, J.E.; Nekimken, H.; Pope, N.; Bibeau, R.

    1995-07-01

    The waste monitoring system in use at Los Alamos National Laboratory`s Plutonium Facility, TA-55, is a computer-based system that proves real-time information on industrial effluents. Remote computers monitor discharge events and data moves from one system to another via a local area network. This report describes the history, system design, summary, instrumentation list, displays, trending screens, and layout of the waste monitoring system.

  3. How Do Galaxies Grow?

    NASA Astrophysics Data System (ADS)

    2008-08-01

    Astronomers have caught multiple massive galaxies in the act of merging about 4 billion years ago. This discovery, made possible by combining the power of the best ground- and space-based telescopes, uniquely supports the favoured theory of how galaxies form. ESO PR Photo 24/08 ESO PR Photo 24/08 Merging Galaxies in Groups How do galaxies form? The most widely accepted answer to this fundamental question is the model of 'hierarchical formation', a step-wise process in which small galaxies merge to build larger ones. One can think of the galaxies forming in a similar way to how streams merge to form rivers, and how these rivers, in turn, merge to form an even larger river. This theoretical model predicts that massive galaxies grow through many merging events in their lifetime. But when did their cosmological growth spurts finish? When did the most massive galaxies get most of their mass? To answer these questions, astronomers study massive galaxies in clusters, the cosmological equivalent of cities filled with galaxies. "Whether the brightest galaxies in clusters grew substantially in the last few billion years is intensely debated. Our observations show that in this time, these galaxies have increased their mass by 50%," says Kim-Vy Tran from the University of Zürich, Switzerland, who led the research. The astronomers made use of a large ensemble of telescopes and instruments, including ESO's Very Large Telescope (VLT) and the Hubble Space Telescope, to study in great detail galaxies located 4 billion light-years away. These galaxies lie in an extraordinary system made of four galaxy groups that will assemble into a cluster. In particular, the team took images with VIMOS and spectra with FORS2, both instruments on the VLT. From these and other observations, the astronomers could identify a total of 198 galaxies belonging to these four groups. The brightest galaxies in each group contain between 100 and 1000 billion of stars, a property that makes them comparable

  4. Growing Galaxies Gently

    NASA Astrophysics Data System (ADS)

    2010-10-01

    New observations from ESO's Very Large Telescope have, for the first time, provided direct evidence that young galaxies can grow by sucking in the cool gas around them and using it as fuel for the formation of many new stars. In the first few billion years after the Big Bang the mass of a typical galaxy increased dramatically and understanding why this happened is one of the hottest problems in modern astrophysics. The results appear in the 14 October issue of the journal Nature. The first galaxies formed well before the Universe was one billion years old and were much smaller than the giant systems - including the Milky Way - that we see today. So somehow the average galaxy size has increased as the Universe has evolved. Galaxies often collide and then merge to form larger systems and this process is certainly an important growth mechanism. However, an additional, gentler way has been proposed. A European team of astronomers has used ESO's Very Large Telescope to test this very different idea - that young galaxies can also grow by sucking in cool streams of the hydrogen and helium gas that filled the early Universe and forming new stars from this primitive material. Just as a commercial company can expand either by merging with other companies, or by hiring more staff, young galaxies could perhaps also grow in two different ways - by merging with other galaxies or by accreting material. The team leader, Giovanni Cresci (Osservatorio Astrofisico di Arcetri) says: "The new results from the VLT are the first direct evidence that the accretion of pristine gas really happened and was enough to fuel vigorous star formation and the growth of massive galaxies in the young Universe." The discovery will have a major impact on our understanding of the evolution of the Universe from the Big Bang to the present day. Theories of galaxy formation and evolution may have to be re-written. The group began by selecting three very distant galaxies to see if they could find evidence

  5. Use of a passive bioreactor to reduce water-borne plant pathogens, nitrate, and sulfate in greenhouse effluent.

    PubMed

    Gruyer, Nicolas; Dorais, Martine; Alsanius, Beatrix W; Zagury, Gérald J

    2013-01-01

    The goal of this study was to evaluate the use of passive bioreactors to reduce water-borne plant pathogens (Pythium ultimum and Fusarium oxysporum) and nutrient load (NO(-) 3 and SO(2-) 4) in greenhouse effluent. Sterilized and unsterilized passive bioreactors filled with a reactive mixture of organic carbon material were used in three replicates. After a startup period of 2 (sterilized) or 5 (unsterilized) weeks, the bioreactor units received for 14 weeks a reconstituted commercial greenhouse effluent composed of 500 mg L(-1) SO(2-) 4 and 300 mg L(-1) NO(-) 3 and were inoculated three times with P. ultimum and F. oxysporum (10(6) CFU mL(-1)). Efficacy in removing water-borne plant pathogens and nitrate reached 99.9% for both the sterilized and unsterilized bioreactors. However, efficacy in reducing the SO(2-) 4 load sharply decreased from 89% to 29% after 2 weeks of NO(-) 3-supply treatment for the unsterilized bioreactors. Although SO(2-) 4 removal efficacy for the sterilized bioreactors did not recover after 4 weeks of NO(-) 3-supply treatment, the unsterilized bioreactor nearly reached a similar level of SO(2-) 4 removal after 4 weeks of NO(-) 3-supply treatment compared with affluent loaded only with SO(2-) 4, where no competition for the carbohydrate source occurred between the denitrification process and sulfate-reducing bacteria activity. Performance differences between the sterilized and unsterilized bioreactors clearly show the predominant importance of sulfate-reducing bacteria. Consequently, when sulfate-reducing bacteria reach their optimal activity, passive bioreactors may constitute a cheap, low-maintenance method of treating greenhouse effluent to recycle wastewater and eliminate nutrient runoff, which has important environmental impacts.

  6. Effluent treatment for nuclear thermal propulsion ground testing

    NASA Astrophysics Data System (ADS)

    Shipers, Larry R.

    The objectives are to define treatment functions, review concept options, discuss PIPET effluent treatment system (ETS), and outline future activities. The topics covered include the following: reactor exhaust; effluent treatment functions; effluent treatment categories; effluent treatment options; concept evaluation; PIPETS ETS envelope; PIPET effluent treatment concept; and future activities.

  7. Effluent treatment for nuclear thermal propulsion ground testing

    NASA Technical Reports Server (NTRS)

    Shipers, Larry R.

    1993-01-01

    The objectives are to define treatment functions, review concept options, discuss PIPET effluent treatment system (ETS), and outline future activities. The topics covered include the following: reactor exhaust; effluent treatment functions; effluent treatment categories; effluent treatment options; concept evaluation; PIPETS ETS envelope; PIPET effluent treatment concept; and future activities.

  8. Micropollutants produced by disinfection of wastewater effluents

    SciTech Connect

    Jolley, R.L.; Cumming, R.B.; Lee, N.E.; Thompson, J.E.; Lewis, L.R.

    1981-01-01

    Recent research conducted with the objective of determining some of the chemical mutagenic characteristics of nonvolatile micropollutants in treated wastewater effluents is summarized. The effluents from nine wastewater plants were examined relative to the chemical effects of the disinfectants chlorine, ozone, and uv light on nonvolatile organic constituents and the formation of mutagenic constituents during disinfection. Results indicate that disinfection by chlorine or ozone can lead to an increase in the number of mutagenic materials in the effluents. (JGB)

  9. High-pitch spiral CT with 3D reformation: an alternative choice for imaging vascular anomalies with affluent blood flow in the head and neck of infants and children

    PubMed Central

    Li, H-O; Huo, R; Xu, G-Q; Duan, Y-H; Nie, P; Ji, X-P; Cheng, Z-P; Xu, Z-D

    2015-01-01

    Objective: To evaluate the feasibility of high-pitch spiral CT in imaging vascular anomalies (VAs) with affluent blood flow in the head and neck of infants and children. Methods: For patients with suspected VAs and affluent blood flow pre-detected by ultrasound, CT was performed with high-pitch mode, individualized low-dose scan protocol and three-dimensional (3D) reformation. A five-point scale was used for image quality evaluation. Diagnostic accuracy was calculated with clinical diagnosis with/without pathological results as the reference standard. Radiation exposure and single-phase scan time were recorded. Treatment strategies were formulated based on CT images and results and were monitored through follow-up results. Results: 20 lesions were identified in 15 patients (median age of 11 months). The mean score of image quality was 4.13 ± 0.74. 7 patients (7/15, 46.67%) were diagnosed with haemangiomas, 6 patients (6/15, 40%) were diagnosed with venous malformations and 2 patients (2/15, 13.33%) were diagnosed with arteriovenous malformations. The average effective radiation doses of a single phase and of the total procedure were 0.27 ± 0.08 and 0.86 ± 0.21 mSv. The average scanning time of a single phase was 0.46 ± 0.09 s. After treatment, 13 patients (13/15, 86.67%) achieved excellent results, and 2 patients (2/15, 13.33%) showed good results in follow-up visits. Conclusion: High-pitch spiral CT with an individualized low-dose scan protocol and 3D reformation is an effective modality for imaging VAs with affluent blood flow in the head and neck of infants and children when vascular details are needed and ultrasound and MRI could not provide the complete information. Advances in knowledge: This study proposes an alternative modality for imaging VAs with affluent blood flow. PMID:26055504

  10. 40 CFR 411.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Subcategory § 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable... following effluent limitations representing the degree of effluent reduction attainable by the...

  11. 40 CFR 411.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Nonleaching Subcategory § 411.12 Effluent limitations guidelines representing the degree of effluent reduction... following effluent limitations representing the degree of effluent reduction attainable by the...

  12. 40 CFR 411.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Subcategory § 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable... following effluent limitations representing the degree of effluent reduction attainable by the...

  13. 40 CFR 411.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Subcategory § 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable... following effluent limitations representing the degree of effluent reduction attainable by the...

  14. 40 CFR 411.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Subcategory § 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable... following effluent limitations representing the degree of effluent reduction attainable by the...

  15. 40 CFR 411.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Nonleaching Subcategory § 411.12 Effluent limitations guidelines representing the degree of effluent reduction... following effluent limitations representing the degree of effluent reduction attainable by the...

  16. 40 CFR 411.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Subcategory § 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable... following effluent limitations representing the degree of effluent reduction attainable by the...

  17. 40 CFR 411.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Nonleaching Subcategory § 411.12 Effluent limitations guidelines representing the degree of effluent reduction... following effluent limitations representing the degree of effluent reduction attainable by the...

  18. 40 CFR 411.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Nonleaching Subcategory § 411.12 Effluent limitations guidelines representing the degree of effluent reduction... following effluent limitations representing the degree of effluent reduction attainable by the...

  19. 40 CFR 411.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... Nonleaching Subcategory § 411.12 Effluent limitations guidelines representing the degree of effluent reduction... following effluent limitations representing the degree of effluent reduction attainable by the...

  20. Crystallisation of minerals from concentrated saline dairy effluent.

    PubMed

    Kezia, K; Lee, J; Zisu, B; Weeks, M; Chen, G; Gras, S; Kentish, S

    2016-09-15

    An understanding of crystallisation within saline effluents is important for the design of both brine crystallisers and brine disposal ponds. In this work, crystallisation of a saline effluent concentrate from the Australian dairy industry has been examined at 22 wt% and 30 wt% total solids and at temperatures between 10 and 70 °C. The precipitation occurs more rapidly at higher temperatures. This trend is dictated by precipitation of calcium phosphate salts, albeit the major constituents of the mixture are NaCl and lactose. The crystallisation induction time can be shortened by introducing cavitation induced by ultrasound. In particular, the use of two short acoustic pulses between 3.7 J/g and 16 J/g at 20 kHz spaced ten minutes apart has maximum impact upon both induction time and crystal size. It is believed that the first ultrasound pulse either generates new nuclei or enhances the mass transfer of solute toward the surface of sub-micron growing crystals. Conversely, the second pulse disrupts the growing crystals and forms secondary nuclei. The ultrasound cannot shift the solution equilibrium and so is not able to improve the low crystal yield. To increase this total yield, further evaporation is necessary. The work provides direction to personnel in the dairy industry of the feasibility of brine crystallisation with respect to energy demand and solid recovery. PMID:27267478

  1. Process for treating effluent from a supercritical water oxidation reactor

    DOEpatents

    Barnes, C.M.; Shapiro, C.

    1997-11-25

    A method for treating a gaseous effluent from a supercritical water oxidation reactor containing entrained solids is provided comprising the steps of expanding the gas/solids effluent from a first to a second lower pressure at a temperature at which no liquid condenses; separating the solids from the gas effluent; neutralizing the effluent to remove any acid gases; condensing the effluent; and retaining the purified effluent to the supercritical water oxidation reactor. 6 figs.

  2. Process for treating effluent from a supercritical water oxidation reactor

    DOEpatents

    Barnes, Charles M.; Shapiro, Carolyn

    1997-01-01

    A method for treating a gaseous effluent from a supercritical water oxidation reactor containing entrained solids is provided comprising the steps of expanding the gas/solids effluent from a first to a second lower pressure at a temperature at which no liquid condenses; separating the solids from the gas effluent; neutralizing the effluent to remove any acid gases; condensing the effluent; and retaining the purified effluent to the supercritical water oxidation reactor.

  3. Liquid effluent study characterization data

    SciTech Connect

    Not Available

    1990-05-01

    During the development of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), public comments were received regarding reduction of the discharge of liquid effluents into the soil column. As a result, the US Department of Energy (DOE), with concurrence of the Washington State Department of Ecology (WSDE)and the US Environmental Protection Agency (EPA), committed to a special project designed to document the discharge history and the charter of Hanford Site liquid discharges. The results of this project will be used in determining the need for additional waste stream analysis, and/or to negotiate additional milestones pertaining to such discharges in the Tri-Party Agreement. Wastestream sampling data collected prior to October 1989 were reported in the Waste Stream Characterization Report. Preliminary Stream-specific Reports were prepared which evaluated that data and proposed dangerous waste designations for each stream. This document contains the wastestream sampling and analysis data collected as part of the liquid effluent study. Data contained in this report were obtained from samples collected from October 1989 through March 1990. Information is presented on the wastestreams that have been sampled, the parameters analyzed, and the dates and times at which the samples were collected. This information will be evaluated in the final Stream-Specific Reports. 9 refs., 4 tabs.

  4. 324 and 327 Facilities Environmental Effluent Specifications

    SciTech Connect

    JOHNSON, D.L.

    1999-08-30

    These effluent specifications address requirements for the 324/321 Facilities, which are undergoing stabilization activities. Effluent specifications are imposed to protect personnel, the environment and the public, by ensuring adequate implementation and compliance with federal and state regulatory requirements and Hanford programs.

  5. 324/327 facilities environmental effluent specifications

    SciTech Connect

    JOHNSON, D.L.

    1998-10-29

    These effluent technical specifications address requirements for the 324/327 facilities, which are undergoing stabilization activities. Effluent technical specifications are imposed to protect personnel, the environment and the public, by ensuring adequate implementation and compliance with federal and state regulatory requirements and Hanford programs.

  6. 40 CFR 471.36 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Nickel-Cobalt Forming Subcategory § 471.36 Effluent limitations representing the degree of effluent...

  7. 40 CFR 471.36 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Nickel-Cobalt Forming Subcategory § 471.36 Effluent limitations representing the degree of effluent...

  8. 40 CFR 430.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.82 Effluent limitations representing the degree of effluent...

  9. 40 CFR 430.84 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.84 Effluent limitations representing the degree of effluent reduction...

  10. 40 CFR 430.83 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.83 Effluent limitations representing the degree of effluent reduction...

  11. 40 CFR 430.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.82 Effluent limitations representing the degree of effluent...

  12. 40 CFR 430.83 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.83 Effluent limitations representing the degree of effluent reduction...

  13. 40 CFR 430.84 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Non-Wood Chemical Pulp Subcategory § 430.84 Effluent limitations representing the degree of effluent reduction...

  14. 40 CFR 446.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.13 Effluent limitations guidelines representing the degree of effluent...

  15. 40 CFR 446.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.13 Effluent limitations guidelines representing the degree of effluent...

  16. 40 CFR 464.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-continuous dischargers. (a) Casting Cleaning Operations. BPT Effluent Limitations Pollutant or pollutant... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Aluminum Casting Subcategory § 464.12 Effluent limitations guidelines representing the degree of...

  17. Growing Your Own versus Mentoring

    ERIC Educational Resources Information Center

    Gibbs, Greg K.

    2005-01-01

    With the current scarcity of qualified administrative candidates, the author hears many districts talking of "growing their own" administrators. The current practice of "growing your own" appears to be largely driven by specific district needs and finding someone who can best fill those needs in a timely fashion. Minor grooming and limited…

  18. 40 CFR 405.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcategory § 405.87 Effluent limitations...

  19. 40 CFR 405.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcategory § 405.87 Effluent limitations...

  20. 40 CFR 405.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcategory § 405.87 Effluent limitations...

  1. 40 CFR 405.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Cottage Cheese and Cultured Cream Cheese Subcategory § 405.57 Effluent limitations guidelines representing the...

  2. 40 CFR 405.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcategory § 405.87 Effluent limitations...

  3. 40 CFR 471.56 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Refractory Metals Forming Subcategory § 471.56 Effluent limitations representing the degree of...

  4. 40 CFR 471.96 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Zirconium-Hafnium Forming Subcategory § 471.96 Effluent limitations representing the degree of...

  5. 40 CFR 471.46 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Precious Metals Forming Subcategory § 471.46 Effluent limitations representing the degree of...

  6. 40 CFR 471.56 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Refractory Metals Forming Subcategory § 471.56 Effluent limitations representing the degree of...

  7. 40 CFR 471.46 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Precious Metals Forming Subcategory § 471.46 Effluent limitations representing the degree of...

  8. 40 CFR 471.96 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Zirconium-Hafnium Forming Subcategory § 471.96 Effluent limitations representing the degree of...

  9. 40 CFR 471.106 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Metals Powders Subcategory § 471.106 Effluent limitations representing the degree of...

  10. 40 CFR 471.106 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Metals Powders Subcategory § 471.106 Effluent limitations representing the degree of...

  11. 40 CFR 417.173 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.173 Effluent limitations guidelines...

  12. 40 CFR 417.153 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.153 Effluent limitations guidelines representing...

  13. 40 CFR 417.153 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.153 Effluent limitations guidelines representing...

  14. 40 CFR 417.173 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.173 Effluent limitations guidelines...

  15. 40 CFR 417.193 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.193 Effluent limitations guidelines representing...

  16. 40 CFR 417.183 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Drum Dried Detergents Subcategory § 417.183 Effluent limitations guidelines representing...

  17. 40 CFR 417.183 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Drum Dried Detergents Subcategory § 417.183 Effluent limitations guidelines representing...

  18. 40 CFR 417.193 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.193 Effluent limitations guidelines representing...

  19. 40 CFR 417.193 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.193 Effluent limitations guidelines representing...

  20. 40 CFR 417.183 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Drum Dried Detergents Subcategory § 417.183 Effluent limitations guidelines representing...

  1. 40 CFR 417.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.172 Effluent limitations...

  2. 40 CFR 417.153 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.153 Effluent limitations guidelines representing...

  3. 40 CFR 417.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.172 Effluent limitations...

  4. 40 CFR 417.173 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.173 Effluent limitations guidelines...

  5. 40 CFR 417.173 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.173 Effluent limitations guidelines...

  6. 40 CFR 417.193 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.193 Effluent limitations guidelines representing...

  7. 40 CFR 417.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.172 Effluent limitations...

  8. 40 CFR 417.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.172 Effluent limitations...

  9. 40 CFR 417.183 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Drum Dried Detergents Subcategory § 417.183 Effluent limitations guidelines representing...

  10. 40 CFR 417.153 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.153 Effluent limitations guidelines representing...

  11. 40 CFR 417.183 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Drum Dried Detergents Subcategory § 417.183 Effluent limitations guidelines representing...

  12. 40 CFR 417.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.172 Effluent limitations...

  13. 40 CFR 417.173 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergents by Dry Blending Subcategory § 417.173 Effluent limitations guidelines...

  14. 40 CFR 417.153 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Spray Dried Detergents Subcategory § 417.153 Effluent limitations guidelines representing...

  15. 40 CFR 417.193 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Detergent Bars and Cakes Subcategory § 417.193 Effluent limitations guidelines representing...

  16. 40 CFR 426.133 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.133 Effluent limitations guidelines...

  17. 40 CFR 426.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.22 Effluent limitations guidelines representing...

  18. 40 CFR 426.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.77 Effluent limitations guidelines representing the degree...

  19. 40 CFR 426.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.42 Effluent limitations guidelines representing the degree...

  20. 40 CFR 426.132 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.132 Effluent limitations...

  1. 40 CFR 426.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.27 Effluent limitations guidelines representing the degree...

  2. 40 CFR 426.67 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.67 Effluent limitations guidelines representing the degree...

  3. 40 CFR 426.133 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.133 Effluent limitations guidelines representing the...

  4. 40 CFR 426.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.72 Effluent limitations guidelines representing the degree...

  5. 40 CFR 426.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.42 Effluent limitations guidelines representing...

  6. 40 CFR 426.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.62 Effluent limitations guidelines representing...

  7. 40 CFR 426.67 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.67 Effluent limitations guidelines representing the degree...

  8. 40 CFR 426.132 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.132 Effluent limitations...

  9. 40 CFR 426.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.32 Effluent limitations guidelines representing the degree...

  10. 40 CFR 426.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.73 Effluent limitations guidelines representing the degree...

  11. 40 CFR 426.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.77 Effluent limitations guidelines representing the degree...

  12. 40 CFR 426.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.72 Effluent limitations guidelines representing...

  13. 40 CFR 426.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.33 Effluent limitations guidelines representing the degree...

  14. 40 CFR 426.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.33 Effluent limitations guidelines representing the degree...

  15. 40 CFR 426.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.77 Effluent limitations guidelines representing the degree...

  16. 40 CFR 426.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.22 Effluent limitations guidelines representing...

  17. 40 CFR 426.37 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.37 Effluent limitations guidelines representing the degree...

  18. 40 CFR 426.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.23 Effluent limitations guidelines representing the degree...

  19. 40 CFR 426.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.32 Effluent limitations guidelines representing...

  20. 40 CFR 426.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.32 Effluent limitations guidelines representing...

  1. 40 CFR 426.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.27 Effluent limitations guidelines representing the degree...

  2. 40 CFR 426.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.53 Effluent limitations guidelines representing the degree...

  3. 40 CFR 426.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.62 Effluent limitations guidelines representing the degree of...

  4. 40 CFR 426.133 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.133 Effluent limitations guidelines...

  5. 40 CFR 426.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.42 Effluent limitations guidelines representing...

  6. 40 CFR 426.37 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.37 Effluent limitations guidelines representing the degree...

  7. 40 CFR 426.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.47 Effluent limitations guidelines representing the degree...

  8. 40 CFR 426.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.53 Effluent limitations guidelines representing the degree...

  9. 40 CFR 426.67 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.67 Effluent limitations guidelines representing the degree...

  10. 40 CFR 426.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.32 Effluent limitations guidelines representing...

  11. 40 CFR 426.37 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.37 Effluent limitations guidelines representing the degree...

  12. 40 CFR 426.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.57 Effluent limitations guidelines representing the degree...

  13. 40 CFR 426.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.52 Effluent limitations guidelines representing...

  14. 40 CFR 426.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.53 Effluent limitations guidelines representing the degree...

  15. 40 CFR 426.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.62 Effluent limitations guidelines representing...

  16. 40 CFR 426.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.47 Effluent limitations guidelines representing the degree...

  17. 40 CFR 426.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.47 Effluent limitations guidelines representing the degree...

  18. 40 CFR 426.133 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.133 Effluent limitations guidelines representing the...

  19. 40 CFR 426.133 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.133 Effluent limitations guidelines...

  20. 40 CFR 426.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.42 Effluent limitations guidelines representing the degree...

  1. 40 CFR 426.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.52 Effluent limitations guidelines representing the degree...

  2. 40 CFR 426.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.62 Effluent limitations guidelines representing...

  3. 40 CFR 426.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.73 Effluent limitations guidelines representing the degree...

  4. 40 CFR 426.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.57 Effluent limitations guidelines representing the degree...

  5. 40 CFR 426.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.52 Effluent limitations guidelines representing the degree...

  6. 40 CFR 426.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.52 Effluent limitations guidelines representing...

  7. 40 CFR 426.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.23 Effluent limitations guidelines representing the degree...

  8. 40 CFR 426.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.57 Effluent limitations guidelines representing the degree...

  9. 40 CFR 426.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.72 Effluent limitations guidelines representing...

  10. 40 CFR 426.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Float Glass Manufacturing Subcategory § 426.52 Effluent limitations guidelines representing...

  11. 40 CFR 426.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Tempering Subcategory § 426.62 Effluent limitations guidelines representing the degree of...

  12. 40 CFR 426.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.27 Effluent limitations guidelines representing the degree...

  13. 40 CFR 426.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.73 Effluent limitations guidelines representing the degree...

  14. 40 CFR 426.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.32 Effluent limitations guidelines representing the degree...

  15. 40 CFR 426.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.72 Effluent limitations guidelines representing the degree...

  16. 40 CFR 426.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Rolled Glass Manufacturing Subcategory § 426.33 Effluent limitations guidelines representing the degree...

  17. 40 CFR 426.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Automotive Glass Laminating Subcategory § 426.72 Effluent limitations guidelines representing...

  18. 40 CFR 426.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.22 Effluent limitations guidelines representing...

  19. 40 CFR 426.132 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Hand Pressed and Blown Glass Manufacturing Subcategory § 426.132 Effluent limitations...

  20. 40 CFR 426.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.22 Effluent limitations guidelines representing the degree...

  1. 40 CFR 426.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Plate Glass Manufacturing Subcategory § 426.42 Effluent limitations guidelines representing...

  2. 40 CFR 426.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.22 Effluent limitations guidelines representing the degree...

  3. 40 CFR 426.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) GLASS MANUFACTURING POINT SOURCE CATEGORY Sheet Glass Manufacturing Subcategory § 426.23 Effluent limitations guidelines representing the degree...

  4. 40 CFR 409.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.57 Effluent limitations guidelines representing the degree...

  5. 40 CFR 409.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.52 Effluent limitations guidelines representing...

  6. 40 CFR 409.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.72 Effluent limitations guidelines representing the degree...

  7. 40 CFR 409.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.87 Effluent limitations guidelines representing the degree...

  8. 40 CFR 409.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.57 Effluent limitations guidelines representing the degree...

  9. 40 CFR 409.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.87 Effluent limitations guidelines representing the degree...

  10. 40 CFR 409.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.87 Effluent limitations guidelines representing the degree...

  11. 40 CFR 409.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.52 Effluent limitations guidelines representing...

  12. 40 CFR 409.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.57 Effluent limitations guidelines representing the degree...

  13. 40 CFR 409.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.57 Effluent limitations guidelines representing the degree...

  14. 40 CFR 409.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.52 Effluent limitations guidelines representing...

  15. 40 CFR 409.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.72 Effluent limitations guidelines representing the degree...

  16. 40 CFR 409.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.72 Effluent limitations guidelines representing the degree...

  17. 40 CFR 409.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.87 Effluent limitations guidelines representing the degree...

  18. 40 CFR 409.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.52 Effluent limitations guidelines representing...

  19. 40 CFR 409.87 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.87 Effluent limitations guidelines representing the degree...

  20. 40 CFR 409.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.52 Effluent limitations guidelines representing...

  1. 40 CFR 409.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.57 Effluent limitations guidelines representing the degree...

  2. 40 CFR 409.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.72 Effluent limitations guidelines representing the degree...

  3. 40 CFR 409.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.72 Effluent limitations guidelines representing the degree...

  4. 40 CFR 458.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Channel Process Subcategory § 458.32 Effluent limitations guidelines representing the...

  5. 40 CFR 458.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Lamp Process Subcategory § 458.42 Effluent limitations guidelines representing the degree...

  6. 40 CFR 458.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Thermal Process Subcategory § 458.22 Effluent limitations guidelines representing the...

  7. 40 CFR 407.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Vegetables Subcategory § 407.77 Effluent limitations...

  8. 40 CFR 407.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Vegetables Subcategory § 407.77 Effluent limitations...

  9. 40 CFR 407.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Vegetables Subcategory § 407.77 Effluent limitations...

  10. 40 CFR 407.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Vegetables Subcategory § 407.77 Effluent limitations...

  11. 40 CFR 407.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Vegetables Subcategory § 407.77 Effluent limitations...

  12. 40 CFR 464.37 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Ferrous Casting Subcategory § 464.37 Effluent limitations guidelines representing the degree of...

  13. 40 CFR 464.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Copper Casting Subcategory § 464.27 Effluent limitations guidelines representing the degree of...

  14. 40 CFR 464.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Aluminum Casting Subcategory § 464.17 Effluent limitations guidelines representing the degree of...

  15. 40 CFR 464.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting Subcategory § 464.47 Effluent limitations guidelines representing the degree of...

  16. 40 CFR 464.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Copper Casting Subcategory § 464.27 Effluent limitations guidelines representing the degree of...

  17. 40 CFR 464.37 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Ferrous Casting Subcategory § 464.37 Effluent limitations guidelines representing the degree of...

  18. 40 CFR 464.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting Subcategory § 464.47 Effluent limitations guidelines representing the degree of...

  19. 40 CFR 464.17 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) METAL MOLDING AND CASTING POINT SOURCE CATEGORY Aluminum Casting Subcategory § 464.17 Effluent limitations guidelines representing the degree of...

  20. 40 CFR 447.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.12 Effluent limitations guidelines representing the...

  1. 40 CFR 447.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.12 Effluent limitations guidelines representing the...

  2. 40 CFR 447.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.12 Effluent limitations guidelines representing the...

  3. 40 CFR 424.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Other Calcium Carbide Furnaces Subcategory § 424.53 Effluent limitations guidelines representing the degree of...

  4. 40 CFR 424.57 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Other Calcium Carbide Furnaces Subcategory § 424.57 Effluent limitations guidelines representing the degree of...

  5. 40 CFR 424.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Calcium Carbide Furnaces With Wet Air Pollution Control Devices Subcategory § 424.43 Effluent...

  6. 40 CFR 424.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Calcium Carbide Furnaces With Wet Air Pollution Control Devices Subcategory § 424.47 Effluent...

  7. 40 CFR 426.113 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Television Picture Tube Envelope Manufacturing Subcategory § 426.113 Effluent limitations guidelines representing...

  8. 40 CFR 426.117 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GLASS MANUFACTURING POINT SOURCE CATEGORY Television Picture Tube Envelope Manufacturing Subcategory § 426.117 Effluent limitations guidelines representing...

  9. 40 CFR 428.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.32 Effluent limitations guidelines representing the...

  10. 40 CFR 428.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.62 Effluent...

  11. 40 CFR 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.22 Effluent limitations guidelines representing the...

  12. 40 CFR 428.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.32 Effluent limitations guidelines representing the...

  13. 40 CFR 428.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.83 Effluent limitations guidelines representing the degree of...

  14. 40 CFR 428.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.63 Effluent...

  15. 40 CFR 428.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.73 Effluent...

  16. 40 CFR 428.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.83 Effluent limitations guidelines representing the degree...

  17. 40 CFR 428.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.83 Effluent limitations guidelines representing the degree of...

  18. 40 CFR 428.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.83 Effluent limitations guidelines representing the degree...

  19. 40 CFR 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.22 Effluent limitations guidelines representing the...

  20. 40 CFR 428.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.73 Effluent limitations...

  1. 40 CFR 428.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.63 Effluent limitations...

  2. 40 CFR 428.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.42 Effluent limitations guidelines representing the degree...

  3. 40 CFR 428.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.33 Effluent limitations guidelines representing the degree of...

  4. 40 CFR 428.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.82 Effluent limitations guidelines representing the degree...

  5. 40 CFR 428.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.33 Effluent limitations guidelines representing the degree of...

  6. 40 CFR 428.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.73 Effluent...

  7. 40 CFR 428.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.23 Effluent limitations guidelines representing the degree of...

  8. 40 CFR 428.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.42 Effluent limitations guidelines representing the degree...

  9. 40 CFR 428.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.52 Effluent...

  10. 40 CFR 428.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.32 Effluent limitations guidelines representing the degree of...

  11. 40 CFR 428.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.72 Effluent...

  12. 40 CFR 428.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.53 Effluent limitations...

  13. 40 CFR 428.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.63 Effluent...

  14. 40 CFR 428.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.33 Effluent limitations guidelines representing the degree of...

  15. 40 CFR 428.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.73 Effluent...

  16. 40 CFR 428.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.52 Effluent...

  17. 40 CFR 428.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.53 Effluent...

  18. 40 CFR 428.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.23 Effluent limitations guidelines representing the degree of...

  19. 40 CFR 428.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.53 Effluent limitations...

  20. 40 CFR 428.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.32 Effluent limitations guidelines representing the...

  1. 40 CFR 428.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Latex Rubber Subcategory § 428.42 Effluent limitations guidelines representing the degree...

  2. 40 CFR 428.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.23 Effluent limitations guidelines representing the degree of...

  3. 40 CFR 428.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.53 Effluent...

  4. 40 CFR 428.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.53 Effluent...

  5. 40 CFR 428.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.63 Effluent...

  6. 40 CFR 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.22 Effluent limitations guidelines representing the degree of...

  7. 40 CFR 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.22 Effluent limitations guidelines representing the degree of...

  8. 40 CFR 428.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.82 Effluent limitations guidelines representing the degree...

  9. 40 CFR 428.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Wet Digestion Reclaimed Rubber Subcategory § 428.83 Effluent limitations guidelines representing the degree...

  10. 40 CFR 428.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Emulsion Crumb Rubber Subcategory § 428.22 Effluent limitations guidelines representing the...

  11. 40 CFR 428.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Solution Crumb Rubber Subcategory § 428.32 Effluent limitations guidelines representing the degree of...

  12. 40 CFR 428.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.72 Effluent...

  13. 40 CFR 428.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.73 Effluent limitations...

  14. 40 CFR 422.62 - Effluent limitations and guidelines representing the degree of effluent reduction attainable by...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.62 Effluent limitations and guidelines representing the degree of...

  15. 40 CFR 440.105 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Copper, Lead, Zinc, Gold, Silver, and Molybdenum Ores Subcategory § 440.105 Effluent limitations representing...

  16. 40 CFR 440.105 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Copper, Lead, Zinc, Gold, Silver, and Molybdenum Ores Subcategory § 440.105 Effluent limitations representing...

  17. 40 CFR 440.35 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.35 Effluent limitations representing the degree of...

  18. 40 CFR 440.35 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.35 Effluent limitations representing the degree of...

  19. 40 CFR 440.35 - Effluent limitations representing the degree of effluent reduction attainable by the application...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ORE MINING AND DRESSING POINT SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.35 Effluent limitations representing the degree of...

  20. 40 CFR 446.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.12 Effluent limitations guidelines representing the degree...

  1. 40 CFR 446.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.12 Effluent limitations guidelines representing...

  2. 40 CFR 446.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.12 Effluent limitations guidelines representing...

  3. 40 CFR 446.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.13 Effluent limitations guidelines representing the degree...

  4. 40 CFR 446.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.12 Effluent limitations guidelines representing...

  5. 40 CFR 446.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.13 Effluent limitations guidelines representing the degree...

  6. 40 CFR 446.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.13 Effluent limitations guidelines representing the degree...

  7. 40 CFR 446.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PAINT FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Paint Subcategory § 446.12 Effluent limitations guidelines representing the degree...

  8. 40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.73 Effluent limitations guidelines representing the degree...

  9. 40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.72 Effluent limitations guidelines representing...

  10. 40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.77 Effluent limitations guidelines representing the degree...

  11. 40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.72 Effluent limitations guidelines representing...

  12. 40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.73 Effluent limitations guidelines representing the degree...

  13. 40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.72 Effluent limitations guidelines representing...

  14. 40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.77 Effluent limitations guidelines representing the degree...

  15. 40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.72 Effluent limitations guidelines representing...

  16. 40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.77 Effluent limitations guidelines representing the degree...

  17. 40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.77 Effluent limitations guidelines representing the degree...

  18. 40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.73 Effluent limitations guidelines representing the degree...

  19. 40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.77 Effluent limitations guidelines representing the degree...

  20. 40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.73 Effluent limitations guidelines representing the degree...

  1. 40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.72 Effluent limitations guidelines representing...

  2. 40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Mixed and Blend Fertilizer Production Subcategory § 418.73 Effluent limitations guidelines representing the degree...

  3. 40 CFR 427.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.33 Effluent limitations guidelines representing the...

  4. 40 CFR 427.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.82 Effluent limitations...

  5. 40 CFR 427.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.12 Effluent limitations guidelines representing the degree...

  6. 40 CFR 427.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.73 Effluent limitations guidelines representing the degree...

  7. 40 CFR 427.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.43 Effluent limitations guidelines representing...

  8. 40 CFR 427.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.52 Effluent limitations guidelines representing the degree...

  9. 40 CFR 427.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.63 Effluent limitations guidelines representing the degree of...

  10. 40 CFR 427.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.22 Effluent limitations guidelines representing the degree...

  11. 40 CFR 427.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.22 Effluent limitations guidelines representing the...

  12. 40 CFR 427.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.23 Effluent limitations guidelines representing the degree...

  13. 40 CFR 427.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.63 Effluent limitations guidelines representing the degree of...

  14. 40 CFR 427.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.22 Effluent limitations guidelines representing the degree...

  15. 40 CFR 427.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.73 Effluent limitations guidelines representing the degree...

  16. 40 CFR 427.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.52 Effluent limitations guidelines representing the degree...

  17. 40 CFR 427.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.53 Effluent limitations guidelines representing the degree of...

  18. 40 CFR 427.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.32 Effluent limitations guidelines representing the...

  19. 40 CFR 427.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.53 Effluent limitations guidelines representing the degree of...

  20. 40 CFR 427.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.33 Effluent limitations guidelines representing the...

  1. 40 CFR 427.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.62 Effluent limitations guidelines representing the degree of...

  2. 40 CFR 427.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.13 Effluent limitations guidelines representing the degree...

  3. 40 CFR 427.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.52 Effluent limitations guidelines representing the degree of...

  4. 40 CFR 427.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.52 Effluent limitations guidelines representing the degree of...

  5. 40 CFR 427.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.82 Effluent limitations...

  6. 40 CFR 427.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.62 Effluent limitations guidelines representing the degree...

  7. 40 CFR 427.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.23 Effluent limitations guidelines representing the degree...

  8. 40 CFR 427.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.32 Effluent limitations guidelines...

  9. 40 CFR 427.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.82 Effluent limitations guidelines...

  10. 40 CFR 427.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.12 Effluent limitations guidelines representing the...

  11. 40 CFR 427.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.42 Effluent limitations guidelines representing...

  12. 40 CFR 427.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.33 Effluent limitations guidelines representing the...

  13. 40 CFR 427.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.52 Effluent limitations guidelines representing the degree...

  14. 40 CFR 427.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.32 Effluent limitations guidelines...

  15. 40 CFR 427.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.63 Effluent limitations guidelines representing the degree of...

  16. 40 CFR 427.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.13 Effluent limitations guidelines representing the degree...

  17. 40 CFR 427.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.83 Effluent limitations guidelines representing the...

  18. 40 CFR 427.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.43 Effluent limitations guidelines representing...

  19. 40 CFR 427.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.12 Effluent limitations guidelines representing the...

  20. 40 CFR 427.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.73 Effluent limitations guidelines representing the degree...

  1. 40 CFR 427.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.13 Effluent limitations guidelines representing the degree...

  2. 40 CFR 427.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Starch Binder) Subcategory § 427.32 Effluent limitations guidelines representing the...

  3. 40 CFR 427.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Coating or Finishing of Asbestos Textiles Subcategory § 427.82 Effluent limitations...

  4. 40 CFR 427.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Pipe Subcategory § 427.12 Effluent limitations guidelines representing the degree...

  5. 40 CFR 427.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.72 Effluent limitations guidelines representing the...

  6. 40 CFR 427.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.23 Effluent limitations guidelines representing the degree...

  7. 40 CFR 427.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos-Cement Sheet Subcategory § 427.22 Effluent limitations guidelines representing the...

  8. 40 CFR 427.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing Subcategory § 427.62 Effluent limitations guidelines representing the degree of...

  9. 40 CFR 427.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.72 Effluent limitations guidelines representing the degree...

  10. 40 CFR 427.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor Tile Subcategory § 427.72 Effluent limitations guidelines representing the degree...

  11. 40 CFR 427.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.42 Effluent limitations guidelines representing...

  12. 40 CFR 427.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Paper (Elastomeric Binder) Subcategory § 427.43 Effluent limitations guidelines representing...

  13. 40 CFR 427.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard Subcategory § 427.53 Effluent limitations guidelines representing the degree of...

  14. 40 CFR 417.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.73 Effluent limitations guidelines representing the degree...

  15. 40 CFR 417.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.82 Effluent limitations guidelines representing...

  16. 40 CFR 417.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.72 Effluent limitations guidelines representing...

  17. 40 CFR 417.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.73 Effluent limitations guidelines representing the degree...

  18. 40 CFR 417.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.82 Effluent limitations guidelines representing...

  19. 40 CFR 417.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.63 Effluent limitations guidelines representing...

  20. 40 CFR 417.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.82 Effluent limitations guidelines representing...

  1. 40 CFR 417.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.83 Effluent limitations guidelines representing the degree...

  2. 40 CFR 417.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.72 Effluent limitations guidelines representing...

  3. 40 CFR 417.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.72 Effluent limitations guidelines representing...

  4. 40 CFR 417.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.73 Effluent limitations guidelines representing the degree...

  5. 40 CFR 417.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.63 Effluent limitations guidelines representing...

  6. 40 CFR 417.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.63 Effluent limitations guidelines representing...

  7. 40 CFR 417.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.72 Effluent limitations guidelines representing...

  8. 40 CFR 417.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.82 Effluent limitations guidelines representing...

  9. 40 CFR 417.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.63 Effluent limitations guidelines representing...

  10. 40 CFR 417.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.83 Effluent limitations guidelines representing the degree...

  11. 40 CFR 417.82 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Soaps Subcategory § 417.82 Effluent limitations guidelines representing...

  12. 40 CFR 417.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.73 Effluent limitations guidelines representing the degree...

  13. 40 CFR 417.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.73 Effluent limitations guidelines representing the degree...

  14. 40 CFR 417.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Bar Soaps Subcategory § 417.72 Effluent limitations guidelines representing...

  15. 40 CFR 417.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Soap Flakes and Powders Subcategory § 417.63 Effluent limitations guidelines representing...

  16. Boys Might Catch Up, Family Influences Continue: Influences on Behavioral Self-Regulation in Children from an Affluent Region in Germany before School Entry

    ERIC Educational Resources Information Center

    Gunzenhauser, Catherine; von Suchodoletz, Antje

    2015-01-01

    Research Findings: Behavioral self-regulation is crucial for school success. Although behavioral self-regulation typically grows rapidly during the preschool period, children in this age group vary widely in their behavioral self-regulation capacities. The present study investigated 3 potential determinants of growth rates in behavioral…

  17. Treated sewage effluent (water) potential to be used for horticultural production in Botswana

    NASA Astrophysics Data System (ADS)

    Emongor, V. E.; Ramolemana, G. M.

    Botswana being semi-arid and arid country, the provision of drinking water and water for agricultural production is becoming increasingly scarce and expensive. Measures that can augment the available sources of water or measures that can reduce the demand on potable water should be given serious consideration. Horticulturists have incorporated new technology into many of their production programs, which has enabled them to grow more horticultural crops with less water; however, more effort is needed. Techniques such as drip irrigation, sensors, growing plants with low water requirements, timing and scheduling of irrigation to the growth needs of the plant, mulching, and establishing a minimum water quality standard for horticultural crops must be used to stretch agricultural water supplies. Recycling agricultural water and using treated municipal sewage effluent is a viable option for increasing horticultures’ future water supply in Botswana. Agriculture wastewater and sewage effluents often contain significant quantities of heavy metals and other substances that may be toxic to people but beneficial to horticultural crops. However, before sewage effluent can be used for commercial production of vegetables and fruits, research must be undertaken to determine whether there is accumulation of heavy metals and faecal coliforms in the edible portion of the horticultural produce which may be detrimental to human health 15-20 years later. Research must be undertaken to assess the impact of sewage effluent on soil physical, chemical properties and environment after continued use.

  18. Quantitative microbial risk assessment applied to irrigation of salad crops with waste stabilization pond effluents.

    PubMed

    Pavione, D M S; Bastos, R K X; Bevilacqua, P D

    2013-01-01

    A quantitative microbial risk assessment model for estimating infection risks arising from consuming crops eaten raw that have been irrigated with effluents from stabilization ponds was constructed. A log-normal probability distribution function was fitted to a large database from a comprehensive monitoring of an experimental pond system to account for variability in Escherichia coli concentration in irrigation water. Crop contamination levels were estimated using predictive models derived from field experiments involving the irrigation of several crops with different effluent qualities. Data on daily intake of salad crops were obtained from a national survey in Brazil. Ten thousand-trial Monte Carlo simulations were used to estimate human health risks associated with the use of wastewater for irrigating low- and high-growing crops. The use of effluents containing 10(3)-10(4) E. coli per 100 ml resulted in median rotavirus infection risk of approximately 10(-3) and 10(-4) pppy when irrigating, respectively, low- and high-growing crops; the corresponding 95th percentile risk estimates were around 10(-2) in both scenarios. Sensitivity analyses revealed that variations in effluent quality, in the assumed ratios of pathogens to E. coli, and in the reduction of pathogens between harvest and consumption had great impact upon risk estimates.

  19. Birth of space plant growing

    NASA Technical Reports Server (NTRS)

    Mashinskiy, A.; Nechitaylo, G.

    1983-01-01

    The attempts, and successes, to grow plants in space, and get them to fully develop, bloom and produce seeds using orchids are presented. The psychological advantages of the presence of plants onboard space vehicles and space stations is indicated.

  20. Langmuir circulations beneath growing waves

    NASA Astrophysics Data System (ADS)

    Phillips, W. R. C.

    2000-11-01

    The instability of a weakly sheared density stratified two dimensional wavy flow to longitudinal vortices is considered. The instability mechanism is Craik-Leibovich type 2, or CL2, and the problem is posited in the context of Langmuir circulations beneath irrotational wind driven surface waves. Of interest is the influence to the instability of growing or decaying waves according to linear theory. The basis for the study is an initial value problem posed by Leibovich & Paolucci (1981) in which the liquid substrate is of semi-infinite extent and the wind driven current is permitted to grow. At zero Richardson number, relative to the solution for neutral waves, it is found that growing waves act to stabilize the instability while decaying waves are destablizing. Furthemore while growing waves act to increase the spanwise wavenumber at onset, decaying waves act to decrease it. The influence of Prandtl and Richardson numbers is also discussed.

  1. Sociology: The growing climate divide

    NASA Astrophysics Data System (ADS)

    Hoffman, Andrew J.

    2011-07-01

    Climate change has reached the level of a 'scientific consensus', but is not yet a 'social consensus'. New analysis highlights that a growing divide between liberals and conservatives in the American public is a major obstacle to achieving this end.

  2. Method for growing plants aeroponically.

    PubMed

    Zobel, R W; Del Tredici, P; Torrey, J G

    1976-03-01

    A simple, inexpensive system for growing plants with their roots bathed in nutrient mist is described. The aeroponics system uses a spinner from a home humidifier to propel nutrient solution into a polyethylene-lined plywood box atop which plants are supported on plastic light-fixture "egg crating." Success in growing a number of herbaceous and woody species, including nodulated legumes and nonlegumes, is reported. PMID:16659479

  3. Reverse osmosis treatment of 200-area effluents

    SciTech Connect

    Stimson, R.E.

    1984-09-19

    Reverse osmosis testing has demonstrated sufficient decontamination factors for radionuclides and hazardous metals present in 200-area effluents (routine and accidental). Test samples included actual process effluents, simulated effluents, and samples spiked with high activity wastes to simulate a cooling coil leak. No unusual behavior such as loss of flux or salt rejection was observed. Short term performance appears very good but membrane life and fouling tendencies will be determined only in long term testing scheduled at TNX and H-area with the 40 GPM pilot scale unit.

  4. A WET TALE: TOXICITY OF COMPLEX EFFLUENTS

    EPA Science Inventory

    This course covers standards, regulations, policy, guidance and technical aspects of implementing the whole effluent toxicity program. The curriculum incorporates rationale and information on WET test requirements from USEPA documents, such as the Technical Support Document for W...

  5. Wastewater effluent dispersal in Southern California Bays

    NASA Astrophysics Data System (ADS)

    Uchiyama, Yusuke; Idica, Eileen Y.; McWilliams, James C.; Stolzenbach, Keith D.

    2014-03-01

    The dispersal and dilution of urban wastewater effluents from offshore, subsurface outfalls is simulated with a comprehensive circulation model with downscaling in nested grid configurations for San Pedro and Santa Monica Bays in Southern California during Fall of 2006. The circulation is comprised of mean persistent currents, mesoscale and submesoscale eddies, and tides. Effluent volume inflow rates at Huntington Beach and Hyperion are specified, and both their present outfall locations and alternative nearshore diversion sites are assessed. The effluent tracer concentration fields are highly intermittent mainly due to eddy currents, and their probability distribution functions have long tails of high concentration. The dilution rate is controlled by submesoscale stirring and straining in tracer filaments. The dominant dispersal pattern is alongshore in both directions, approximately along isobaths, over distances of more than 10 km before dilution takes over. The current outfall locations mostly keep the effluent below the surface and away from the shore, as intended, but the nearshore diversions do not.

  6. UV disinfection for onsite sand filter effluent

    SciTech Connect

    Lowery, J.D.; Romatzick, S.

    1982-05-01

    The technical and economic feasibility of using ultraviolet (uv) light as a viable alternative to chlorine as the required disinfectant for onsite sand filter effluents discharged to surface waters in Maine was determined. To obtain a reliable cross section of performance for sand filters in Maine, 74 filters were selected for an effluent characterization program. The effluent characterization study allowed general conclusions to be made with regard to the potential of uv disinfection. A simple suspended lamp uv disinfection unit was designed, constructed, and tested in the laboratory and in the field. The efficiency of the uv disinfection unit was determined through field testing at 10 of the 74 sand filter sites used in the effluent characterization program.

  7. Millimeter wave sensor for monitoring effluents

    DOEpatents

    Gopalsami, Nachappa; Bakhtiari, Sasan; Raptis, Apostolos C.; Dieckman, Stephen L.

    1995-01-01

    A millimeter-wave sensor for detecting and measuring effluents from processing plants either remotely or on-site includes a high frequency signal source for transmitting frequency-modulated continuous waves in the millimeter or submillimeter range with a wide sweep capability and a computer-controlled detector for detecting a plurality of species of effluents on a real time basis. A high resolution spectrum of an effluent, or effluents, is generated by a deconvolution of the measured spectra resulting in a narrowing of the line widths by 2 or 3 orders of magnitude as compared with the pressure broadened spectra detected at atmospheric pressure for improved spectral specificity and measurement sensitivity. The sensor is particularly adapted for remote monitoring such as where access is limited or sensor cost restricts multiple sensors as well as for large area monitoring under nearly all weather conditions.

  8. 40 CFR 427.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... CATEGORY Asbestos Roofing Subcategory § 427.62 Effluent limitations guidelines representing the degree of... shall achieve the following effluent limitations representing the degree of effluent...

  9. 40 CFR 427.92 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... CATEGORY Solvent Recovery Subcategory § 427.92 Effluent limitations guidelines representing the degree of... shall achieve the following effluent limitations representing the degree of effluent...

  10. 40 CFR 443.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... § 443.42 Effluent limitations guidelines representing the degree of effluent reduction attainable by the... limitations representing the degree of effluent reduction attainable by the application of the...

  11. 40 CFR 428.112 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... representing the degree of effluent reduction attainable by the application of the best practicable control... CATEGORY Latex Foam Subcategory § 428.112 Effluent limitations guidelines representing the degree of... shall achieve the following effluent limitations representing the degree of effluent...

  12. Anaerobic digestion of cassava starch factory effluent.

    PubMed

    Manilal, V B; Narayanan, C S; Balagopalan, C

    1990-06-01

    Biomethanation of cassava starch factory effluent in a batch digester produced 130 l biogas/kg dry matter with an average melthane content of 59%. About 63% COD was removed during 60 days. In semicontinuous digesters, gas production was 3251/kg dry matter with a retention time of 33,3 days giving a COD reduction of 50%. Size of starter inoculum was important for good biogasification of the effluent.

  13. Growing self-reconstruction maps.

    PubMed

    do Rêgo, Renata Lúcia Mendonça Ernesto; Araújo, Aluizio Fausto Ribeiro; de Lima Neto, Fernando Buarque

    2010-02-01

    In this paper, we propose a new method for surface reconstruction based on growing self-organizing maps (SOMs), called growing self-reconstruction maps (GSRMs). GSRM is an extension of growing neural gas (GNG) that includes the concept of triangular faces in the learning algorithm and additional conditions in order to include and remove connections, so that it can produce a triangular two-manifold mesh representation of a target object given an unstructured point cloud of its surface. The main modifications concern competitive Hebbian learning (CHL), the vertex insertion operation, and the edge removal mechanism. The method proposed is able to learn the geometry and topology of the surface represented in the point cloud and to generate meshes with different resolutions. Experimental results show that the proposed method can produce models that approximate the shape of an object, including its concave regions, boundaries, and holes, if any. PMID:20007030

  14. Management of growing vestibular schwannomas.

    PubMed

    Ferri, Gian Gaetano; Pirodda, Antonio; Ceroni, Alberto Rinaldi; Fioravanti, Antonio; Calbucci, Fabio; Modugno, Giovanni Carlo

    2013-07-01

    Conservative management of small vestibular schwannomas is frequently proposed as most tumours do not grow. Anyway, tumour growth is reported in 30-40 % of the cases, so that surgery is consequently generally proposed. We primarily observed 161 patients affected by unilateral vestibular schwannomas. All patients were examined by means of gadolinium-enhanced magnetic resonance imaging scans. Tumour growth was recorded in 58 cases (35.8 %) and these subjects set up the group of study. Twenty-two (37.9 %) patients were surgically treated; tumour was always completely removed, all patients had normal facial function after surgery and only one patient suffered from a major complication (cerebellar haematoma). Fourteen patients (24.1 %) were submitted to radiotherapy, while one patient was lost at follow-up and another one died because of other medical reasons. Finally, 20 (34.5 %) subjects continued to be observed for different reasons. The mean follow-up period after identification of growth was 6.1 years. Nine tumours continued to grow, nine tumours stopped growing, one tumour grew and then regressed in size and one tumour decreased. Sixty percent of patients with useful hearing at diagnosis preserved it during the entire observation period. In conclusion, most of VS do not grow; in case of tumour growth, a surgical procedure may be suggested and the outcomes are not negatively influenced by the delay of the procedure. But in some cases, patients can still follow the "wait and scan" policy. In fact, only less than half of the growing tumours continued to grow. Moreover, most of the patients continued to retain a useful hearing. PMID:23135237

  15. Estimating genetic potential of biofuel forest hardwoods to withstand metal toxicity in industrial effluent under dry tropical conditions.

    PubMed

    Manzoor, S A; Mirza, S N; Zubair, M; Nouman, W; Hussain, S B; Mehmood, S; Irshad, A; Sarwar, N; Ammar, A; Iqbal, M F; Asim, A; Chattha, M U; Chattha, M B; Zafar, A; Abid, R

    2015-08-14

    Biofuel tree species are recognized as a promising alternative source of fuel to conventional forms. Additionally, these tree species are also effective in accumulating toxic heavy metals present in some industrial effluents. In developing countries such as Pakistan, the use of biofuel tree species is gaining popularity not only for harvesting economical and environmentally friendly biofuel, but also to sequester poisonous heavy metals from industrial wastewater. This study was aimed at evaluating the genetic potential of two biofuel species, namely, Jatropha curcas and Pongamia pinnata, to grow when irrigated with industrial effluent from the Pak-Arab Fertilizer Factory Multan, Southern Punjab, Pakistan. The growth performances of one-year-old seedlings of both species were compared in soil with adverse physiochemical properties. It was found that J. curcas was better able to withstand the toxicity of the heavy metals present in the fertilizer factory effluent. J. curcas showed maximum gain in height, diameter, and biomass production in soil irrigated with 75% concentrated industrial effluent. In contrast, P. pinnata showed a significant reduction in growth in soil irrigated with more than 50% concentrated industrial effluent, indicating that this species is less tolerant to higher toxicity levels of industrial effluent. This study identifies J. curcas as a promising biofuel tree species that can be grown using industrial wastewater.

  16. Estimating genetic potential of biofuel forest hardwoods to withstand metal toxicity in industrial effluent under dry tropical conditions.

    PubMed

    Manzoor, S A; Mirza, S N; Zubair, M; Nouman, W; Hussain, S B; Mehmood, S; Irshad, A; Sarwar, N; Ammar, A; Iqbal, M F; Asim, A; Chattha, M U; Chattha, M B; Zafar, A; Abid, R

    2015-01-01

    Biofuel tree species are recognized as a promising alternative source of fuel to conventional forms. Additionally, these tree species are also effective in accumulating toxic heavy metals present in some industrial effluents. In developing countries such as Pakistan, the use of biofuel tree species is gaining popularity not only for harvesting economical and environmentally friendly biofuel, but also to sequester poisonous heavy metals from industrial wastewater. This study was aimed at evaluating the genetic potential of two biofuel species, namely, Jatropha curcas and Pongamia pinnata, to grow when irrigated with industrial effluent from the Pak-Arab Fertilizer Factory Multan, Southern Punjab, Pakistan. The growth performances of one-year-old seedlings of both species were compared in soil with adverse physiochemical properties. It was found that J. curcas was better able to withstand the toxicity of the heavy metals present in the fertilizer factory effluent. J. curcas showed maximum gain in height, diameter, and biomass production in soil irrigated with 75% concentrated industrial effluent. In contrast, P. pinnata showed a significant reduction in growth in soil irrigated with more than 50% concentrated industrial effluent, indicating that this species is less tolerant to higher toxicity levels of industrial effluent. This study identifies J. curcas as a promising biofuel tree species that can be grown using industrial wastewater. PMID:26345887

  17. Response of spinach and komatsuna to biogas effluent made from source-separated kitchen garbage.

    PubMed

    Furukawa, Yuichiro; Hasegawa, Hiroshi

    2006-01-01

    Recycling of kitchen garbage is an urgent task for reducing public spending and environmental burdens by incineration and/or landfill. There is an interesting regional effort in Ogawa, Saitama prefecture, Japan, in which source-separated kitchen garbage is anaerobically fermented with a biogas plant and the resultant effluent is used as a quick-release organic fertilizer by surrounding farmers. However, scientific assessments of fertilizer values and risks in the use of the effluent were lacking. Thus, a field experiment was conducted from 2003 to 2004 in Tohoku National Agricultural Research Center to grow spinach (Spinacia oleracea L.) and komatsuna (Brassica rapa var. perviridis L. H. Bailey) for evaluating the fertilizer value of the kitchen garbage effluent (KGE), nitrate, coliform group (CG), Escherichia coli, fecal streptococci (FS), and Vibrio parahaemolyticus concentrations of KGE and in the soil and the plant leaves. A cattle manure effluent (CME) and chemical fertilizers (NPK) were used as controls. Total nitrogen (N) and ammonium N concentrations of the KGE were 1.47 and 1.46 g kg(-1), respectively. The bacteria tested were detected in both biogas effluents in the order of 2 to 3 log CFU g(-1), but there was little evidence that the biogas effluents increased these bacteria in the soil and the plant leaves. At the rate of 22 g N m(-2), yield, total N uptake, apparent N recovery rate, and leaf nitrate ion concentration at harvest of spinach and komatsuna in the KGE plot were mostly comparable to those in the NPK and CME plots. We conclude that the KGE is a quick-release N fertilizer comparable to chemical fertilizers and does not cause contamination of CG, E. coli, FS, or V. parahaemolyticus in the soil and spinach and komatsuna leaves.

  18. Response of spinach and komatsuna to biogas effluent made from source-separated kitchen garbage.

    PubMed

    Furukawa, Yuichiro; Hasegawa, Hiroshi

    2006-01-01

    Recycling of kitchen garbage is an urgent task for reducing public spending and environmental burdens by incineration and/or landfill. There is an interesting regional effort in Ogawa, Saitama prefecture, Japan, in which source-separated kitchen garbage is anaerobically fermented with a biogas plant and the resultant effluent is used as a quick-release organic fertilizer by surrounding farmers. However, scientific assessments of fertilizer values and risks in the use of the effluent were lacking. Thus, a field experiment was conducted from 2003 to 2004 in Tohoku National Agricultural Research Center to grow spinach (Spinacia oleracea L.) and komatsuna (Brassica rapa var. perviridis L. H. Bailey) for evaluating the fertilizer value of the kitchen garbage effluent (KGE), nitrate, coliform group (CG), Escherichia coli, fecal streptococci (FS), and Vibrio parahaemolyticus concentrations of KGE and in the soil and the plant leaves. A cattle manure effluent (CME) and chemical fertilizers (NPK) were used as controls. Total nitrogen (N) and ammonium N concentrations of the KGE were 1.47 and 1.46 g kg(-1), respectively. The bacteria tested were detected in both biogas effluents in the order of 2 to 3 log CFU g(-1), but there was little evidence that the biogas effluents increased these bacteria in the soil and the plant leaves. At the rate of 22 g N m(-2), yield, total N uptake, apparent N recovery rate, and leaf nitrate ion concentration at harvest of spinach and komatsuna in the KGE plot were mostly comparable to those in the NPK and CME plots. We conclude that the KGE is a quick-release N fertilizer comparable to chemical fertilizers and does not cause contamination of CG, E. coli, FS, or V. parahaemolyticus in the soil and spinach and komatsuna leaves. PMID:16973635

  19. How Does Your Garlic Grow?

    ERIC Educational Resources Information Center

    Shimabukuro, Mary A.; Fearing, Vickie

    1993-01-01

    Garlic is an ideal plant for the elementary classroom. It grows rapidly in water without aeration for several weeks and remains relatively free of microbial contamination. Simple experiments with garlic purchased at grocery stores can illustrate various aspects of plant growth. (PR)

  20. Extreme Mechanics of Growing Matter

    NASA Astrophysics Data System (ADS)

    Kuhl, Ellen

    2013-03-01

    Growth is a distinguishing feature of all living things. Unlike standard materials, living matter can autonomously respond to alterations in its environment. As a result of a continuous ultrastructural turnover and renewal of cells and extracellular matrix, living matter can undergo extreme changes in composition, size, and shape within the order of months, weeks, or days. While hard matter typically adapts by increasing its density to grow strong, soft matter adapts by increasing its volume to grow large. Here we provide a state-of-the-art review of growing matter, and compare existing mathematical models for growth and remodeling of living systems. Applications are plentiful ranging from plant growth to tumor growth, from asthma in the lungs to restenosis in the vasculature, from plastic to reconstructive surgery, and from skeletal muscle adaptation to heart failure. Using these examples, we discuss current challenges and potential future directions. We hope to initiate critical discussions around the biophysical modeling of growing matter as a powerful tool to better understand biological systems in health and disease. This research has been supported by the NSF CAREER award CMMI 0952021.

  1. How the pilidium larva grows

    PubMed Central

    2014-01-01

    Background For animal cells, ciliation and mitosis appear to be mutually exclusive. While uniciliated cells can resorb their cilium to undergo mitosis, multiciliated cells apparently can never divide again. Nevertheless, many multiciliated epithelia in animals must grow or undergo renewal. The larval epidermis in a number of marine invertebrate larvae, such as those of annelids, mollusks and nemerteans, consists wholly or in part of multiciliated epithelial cells, generally organized into a swimming and feeding apparatus. Many of these larvae must grow substantially to reach metamorphosis. Do individual epithelial cells simply expand to accommodate an increase in body size, or are there dividing cells amongst them? If some cells divide, where are they located? Results We show that the nemertean pilidium larva, which is almost entirely composed of multiciliated cells, retains pockets of proliferative cells in certain regions of the body. Most of these are found near the larval ciliated band in the recesses between the larval lobes and lappets, which we refer to as axils. Cells in the axils contribute both to the growing larval body and to the imaginal discs that form the juvenile worm inside the pilidium. Conclusions Our findings not only explain how the almost-entirely multiciliated pilidium can grow, but also demonstrate direct coupling of larval and juvenile growth in a maximally-indirect life history. PMID:24690541

  2. Growing an Emerging Research University

    ERIC Educational Resources Information Center

    Birx, Donald L.; Anderson-Fletcher, Elizabeth; Whitney, Elizabeth

    2013-01-01

    The emerging research college or university is one of the most formidable resources a region has to reinvent and grow its economy. This paper is the first of two that outlines a process of building research universities that enhance regional technology development and facilitate flexible networks of collaboration and resource sharing. Although the…

  3. Exploring Classroom Hydroponics. Growing Ideas.

    ERIC Educational Resources Information Center

    National Gardening Association, Burlington, VT.

    Growing Ideas, the National Gardening Association's series for elementary, middle, and junior high school educators, helps teachers engage students in using plants and gardens as contexts for developing a deeper, richer understanding of the world around them. This volume's focus is on hydroponics. It presents basic hydroponics information along…

  4. Colleges' Earmarks Grow, Amid Criticism

    ERIC Educational Resources Information Center

    Brainard, Jeffrey; Hermes, J. J.

    2008-01-01

    A record-breaking number of Congressional pork-barrel projects this year has loaded college and university plates with more earmarks than ever before, despite growing worries that the noncompetitive grants undermine the American scientific enterprise, and in spite of promises by some lawmakers to cut back. An analysis by "The Chronicle" shows that…

  5. Growing Crystals on the Ceiling.

    ERIC Educational Resources Information Center

    Christman, Robert A.

    1980-01-01

    Described is a method of studying growing crystals in a classroom utilizing a carrousel projector standing vertically. A saturated salt solution is placed on a slide on the lens of the projector and the heat from the projector causes the water to evaporate and salt to crystalize. (Author/DS)

  6. Growing Crystals for Infrared Detectors

    NASA Technical Reports Server (NTRS)

    Lehoczky, S. L.; Szofran, F. R.

    1984-01-01

    Unidirectional solidification yields bulk crystals with compositional homogeneity. Unidirectionaly crystal-growth furnace assembly travels vertically so crystal grows upward from bottom tapered end of ampoule. Separately controlled furnaces used for hot (upper) and cold (lower) zones. New process produces ingots with radial compositional homogeneity suitable for fabricating infrared detectors.

  7. Consequences of Growing Up Poor.

    ERIC Educational Resources Information Center

    Duncan, Greg J., Ed.; Brooks-Gunn, Jeanne, Ed.

    The consequences and correlates of growing up poor as well as the mechanisms through which poverty influences children are explored. This book is organized with a primary focus on research findings and a secondary concern with policy implications. The chapters are: (1) "Poor Families, Poor Outcomes: The Well-Being of Children and Youth" (Jeanne…

  8. Growing Patterns: Seeing beyond Counting

    ERIC Educational Resources Information Center

    Markworth, Kimberly A.

    2012-01-01

    Over the past two decades, mathematical patterns have been acknowledged as important early components of children's development of algebraic reasoning (NCTM 2000). In particular, growing patterns have attracted significant attention as a context that helps students develop an understanding of functional relationships (Lee and Freiman 2006; Moss et…

  9. Growing Ideas, 1990-1993.

    ERIC Educational Resources Information Center

    Pranis, Eve, Ed.

    1993-01-01

    This series of journals includes volumes 1-4 of "Growing Ideas," a journal of garden-based learning. Each issue provides instructional ideas, horticultural information and a forum for exchange among teachers using classroom gardening to stimulate learning. Ideas in each issue are separated into three sections. The "Green Tips" section presents…

  10. Organization of growing random networks

    SciTech Connect

    Krapivsky, P. L.; Redner, S.

    2001-06-01

    The organizational development of growing random networks is investigated. These growing networks are built by adding nodes successively, and linking each to an earlier node of degree k with an attachment probability A{sub k}. When A{sub k} grows more slowly than linearly with k, the number of nodes with k links, N{sub k}(t), decays faster than a power law in k, while for A{sub k} growing faster than linearly in k, a single node emerges which connects to nearly all other nodes. When A{sub k} is asymptotically linear, N{sub k}(t){similar_to}tk{sup {minus}{nu}}, with {nu} dependent on details of the attachment probability, but in the range 2{lt}{nu}{lt}{infinity}. The combined age and degree distribution of nodes shows that old nodes typically have a large degree. There is also a significant correlation in the degrees of neighboring nodes, so that nodes of similar degree are more likely to be connected. The size distributions of the in and out components of the network with respect to a given node{emdash}namely, its {open_quotes}descendants{close_quotes} and {open_quotes}ancestors{close_quotes}{emdash}are also determined. The in component exhibits a robust s{sup {minus}2} power-law tail, where s is the component size. The out component has a typical size of order lnt, and it provides basic insights into the genealogy of the network.

  11. Application of co-anaerobic digester's effluent for sustainable agriculture and aquaculture in the Mekong Delta, Vietnam.

    PubMed

    Nguyen, V C N; Fricke, K

    2015-01-01

    This investigation studied the application of digester effluent from co-digestion of pig manure and spent mushroom substrate as a fertilizer for leaf mustard planting and as feed for Tilapia fish growing. The fish raising experiment was set up in 1 × 1 × 1 m hapa conditions (triplicate for each treatment) with the density of 10 individiual per hapa; the fish weight and length were measured every 10 days for 50 continuous days. The leaf mustard was planted in real conditions at farmer's garden with normal cultivation style, and the weight and length of the plant were measured four times during the growing period. The study result shows that the harvest yield of leaf mustard fertilized by the digester effluent was 5.4 times higher than that by an inorganic fertilizer (IF). In addition to its contribution to a higher yield, the digester effluent accelerated the flower formation and shortened cultivation duration. For Tilapia fish culture, the growing rate of fish in the treatments supplied with 50% digester effluent + 50% commercial food (CF) was not significantly different in comparison to the fish cultivation with 100% CF. The result strongly confirms that the digester effluent from a co-digestion biogas plant of pig dung and spent mushroom compost is possible to be used as an organic fertilizer well for not only vegetable planting but also fish culture. PMID:26510614

  12. Application of co-anaerobic digester's effluent for sustainable agriculture and aquaculture in the Mekong Delta, Vietnam.

    PubMed

    Nguyen, V C N; Fricke, K

    2015-01-01

    This investigation studied the application of digester effluent from co-digestion of pig manure and spent mushroom substrate as a fertilizer for leaf mustard planting and as feed for Tilapia fish growing. The fish raising experiment was set up in 1 × 1 × 1 m hapa conditions (triplicate for each treatment) with the density of 10 individiual per hapa; the fish weight and length were measured every 10 days for 50 continuous days. The leaf mustard was planted in real conditions at farmer's garden with normal cultivation style, and the weight and length of the plant were measured four times during the growing period. The study result shows that the harvest yield of leaf mustard fertilized by the digester effluent was 5.4 times higher than that by an inorganic fertilizer (IF). In addition to its contribution to a higher yield, the digester effluent accelerated the flower formation and shortened cultivation duration. For Tilapia fish culture, the growing rate of fish in the treatments supplied with 50% digester effluent + 50% commercial food (CF) was not significantly different in comparison to the fish cultivation with 100% CF. The result strongly confirms that the digester effluent from a co-digestion biogas plant of pig dung and spent mushroom compost is possible to be used as an organic fertilizer well for not only vegetable planting but also fish culture.

  13. 200 Area Liquid Effluent Facilities -- Quality assurance program plan

    SciTech Connect

    Fernandez, L.

    1995-03-13

    This Quality Assurance Program Plan (QAPP) describes the quality assurance and management controls used by the 200 Area Liquid Effluent Facilities (LEF) to perform its activities in accordance with DOE Order 5700.6C. The 200 Area LEF consists of the following facilities: Effluent Treatment Facility (ETF); Treated Effluent Disposal Facility (TEDF); Liquid Effluent Retention facility (LERF); and Truck Loading Facility -- (Project W291). The intent is to ensure that all activities such as collection of effluents, treatment, concentration of secondary wastes, verification, sampling and disposal of treated effluents and solids related with the LEF operations, conform to established requirements.

  14. Halonitromethanes formation in wastewater treatment plant effluents.

    PubMed

    Song, Hocheol; Addison, Jesse W; Hu, Jia; Karanfil, Tanju

    2010-03-01

    Halonitromethanes (HNMs) constitute one class of emerging disinfection by-products with high potential health risks. This study investigated the formation and occurrence of HNMs under different disinfection scenarios and the presence of their precursors in municipal wastewater treatment plant (WWTPs) effluents. Formation potential tests performed on WWTP effluents revealed that HNM formation occurred in the order of ozonation-chlorination > ozonation-chloramination > chlorination > chloramination. Ozonation alone did not produce any HNM. Municipal WWTP effluents contained some reactive HNM precursors, possibly the by-products of biological treatment processes and/or some moiety of industry or household origin. No effects of nitrate on the formation of HNMs were observed in this study, and nitrification in WWTPs appears to remove appreciable portion of HNM precursors, especially those reactive to chlorine. UV disinfection using low pressure lamps in municipal WWTPs had negligible impact on HNM formation potential. HNM concentrations in the effluents of selected WWTPs were either non-detectable or less than minimum reporting level, except for one WWTP that gave trichloronitromethane concentrations in the range of 0.9-1.5 microg L(-1). No HNMs were observed in the effluents disinfected with UV radiation. Therefore, it appears the typical wastewater disinfection processes involving chlorination or UV treatment in WWTPs do not produce significant amounts of HNMs.

  15. Silicone Granulomas, a Growing Problem?

    PubMed Central

    Curreri, Alexis T.; Taylor, Gina A.; Burris, Katy

    2016-01-01

    The formation of granulomas is known to be a possible adverse effect of liquid silicone administration, used for soft tissue augmentation. Its plumping effects provide enhancement of certain body parts, such as the lips, hips, and buttocks. The desire for enhancement, perhaps influenced by popular culture and an unrealistic standard of beauty, leads individuals to seek silicone injections. There is a growing population of women and men receiving injections by unlicensed, unskilled “practitioners” not related to the healthcare profession. Complications under such circumstances are not uncommon, particularly the emergence of silicone granulomas, and the authors’ medical center has seen an increase in such cases. In this case report, the authors illustrate a young patient with significant complications from her silicone injections, review current therapies for silicone granulomas, and discuss this growing medical problem. PMID:27386046

  16. Silicone Granulomas, a Growing Problem?

    PubMed

    Park, Michelle E; Curreri, Alexis T; Taylor, Gina A; Burris, Katy

    2016-05-01

    The formation of granulomas is known to be a possible adverse effect of liquid silicone administration, used for soft tissue augmentation. Its plumping effects provide enhancement of certain body parts, such as the lips, hips, and buttocks. The desire for enhancement, perhaps influenced by popular culture and an unrealistic standard of beauty, leads individuals to seek silicone injections. There is a growing population of women and men receiving injections by unlicensed, unskilled "practitioners" not related to the healthcare profession. Complications under such circumstances are not uncommon, particularly the emergence of silicone granulomas, and the authors' medical center has seen an increase in such cases. In this case report, the authors illustrate a young patient with significant complications from her silicone injections, review current therapies for silicone granulomas, and discuss this growing medical problem. PMID:27386046

  17. Growing a miracle in Kenya.

    PubMed

    Farruggia, Michael J

    2013-01-01

    A Kenyan woman, a retired nurse, and a nurse executive in America are miraculously led together to start a library in Kima, Kenya. Small beginnings grow into the Heather May-MashoodAbiola Children's Resource Centre (HEMAMA). Named after two infant children lost by the Kenyan woman and the nurse executive, HEMAMA is making a difference in the lives of children in the Kima, Kenya community.

  18. Microalgae population dynamics in photobioreactors with secondary sewage effluent as culture medium.

    PubMed

    Marchello, Adriano E; Lombardi, Ana T; Dellamano-Oliveira, Maria José; de Souza, Clovis W O

    2015-03-01

    Nitrogen and phosphorus present in sewage can be used for microalgae growth, possibiliting cost reduction in the production of microalgae at the same time that it decreases the eutrophication potential of the effluent. This research aimed at monitoring the native community of microalgae and coliform bacteria in a secondary effluent from anaerobic municipal sewage treatment. Two treatments (aerated and non-aerated) were performed to grow microalgae under semi-controlled conditions in semi-closed photobioreactors in a greenhouse. The results showed no significant pH and coliforms (total and Escherichia coli ) variation between treatments. Nutrient concentrations were reduced supporting microalgae growth up to 10 (7) cells.mL (-1) independent of aeration. Exponential growth was obtained from the first day for the non-aerated, but a 5 day lag phase of growth was obtained for the aerated. Chlorella vulgaris was the dominant microalgae (99.9%) in both treatments. In the aerated, 5 algae classes were detected (Chlorophyceae, Cyanophyceae, Chrysophyceae, Bacillariophyceae and Euglenophyceae), with 12 taxa, whereas in the non-aerated, 2 classes were identified (Chlorophyceae and Cyanophyceae), with 5 taxa. We concluded that effluent is viable for microalgae growth, especially Chlorella vulgaris, at the same time that the eutrophication potential and coliforms are decreased, contributing for better quality of the final effluent.

  19. Microalgae population dynamics in photobioreactors with secondary sewage effluent as culture medium

    PubMed Central

    Marchello, Adriano E.; Lombardi, Ana T.; Dellamano-Oliveira, Maria José; de Souza, Clovis W.O.

    2015-01-01

    Nitrogen and phosphorus present in sewage can be used for microalgae growth, possibiliting cost reduction in the production of microalgae at the same time that it decreases the eutrophication potential of the effluent. This research aimed at monitoring the native community of microalgae and coliform bacteria in a secondary effluent from anaerobic municipal sewage treatment. Two treatments (aerated and non-aerated) were performed to grow microalgae under semi-controlled conditions in semi-closed photobioreactors in a greenhouse. The results showed no significant pH and coliforms (total and Escherichia coli ) variation between treatments. Nutrient concentrations were reduced supporting microalgae growth up to 10 7 cells.mL −1 independent of aeration. Exponential growth was obtained from the first day for the non-aerated, but a 5 day lag phase of growth was obtained for the aerated. Chlorella vulgaris was the dominant microalgae (99.9%) in both treatments. In the aerated, 5 algae classes were detected (Chlorophyceae, Cyanophyceae, Chrysophyceae, Bacillariophyceae and Euglenophyceae), with 12 taxa, whereas in the non-aerated, 2 classes were identified (Chlorophyceae and Cyanophyceae), with 5 taxa. We concluded that effluent is viable for microalgae growth, especially Chlorella vulgaris, at the same time that the eutrophication potential and coliforms are decreased, contributing for better quality of the final effluent. PMID:26221091

  20. Characterization and optimization of conditions for biodegradation of sella-rice mill effluent.

    PubMed

    Malik, Kamla; Garg, Faquir Chand; Nehra, Kiran

    2011-11-01

    The sella-rice mill effluent is a major environmental pollutant requiring proper treatment before disposal. The present study has been conducted to isolate and characterize micro-organisms capable of growing on sella-rice effluent and to optimize conditions for its rapid bioremediation. Using three different types of media (LB, YEPDA and PDA), a total of 139 isolates were isolated from effluent samples collected from three different locations. Out of these, 45 isolates were found to utilize starch on starch medium, eight isolates showing high efficiency. For the optimization of conditions for maximum utilization of starch by selected isolates, parameters such as effect of addition of carbon and nitrogen sources, effect of growth factors, temperature and pH were studied. Maximum growth (absorbance of 2.10) and starch-utilization (varying in the range of 2.33 to 3.62) was observed on starch medium supplemented with peptone and yeast extract at 30 degrees C with a pH of 6.0. These bacterial isolates also reduced the amount of starch (80.10%), BOD (64.24%) and COD (75.0%) of sella-rice mill effluent after 15 days of incubation. On the basis of morphological and biochemical characteristics, the selected isolates were found to belong to the genera Lactobacillus and Micrococcus. PMID:22471214