Science.gov

Sample records for ag au pt

  1. Component conversion from pure Au nanorods to multiblock Ag-Au-Ag nanorods assisted by Pt nanoframe templates

    NASA Astrophysics Data System (ADS)

    Lee, Sangji; Jang, Hee-Jeong; Jang, Ho Young; Kim, Seong Kyu; Park, Sungho

    2016-06-01

    We developed a new method for synthesizing multiblock Ag-Au-Ag nanorods using Pt nanoframes that had been deposited on the edges of Au nanorod seeds. As a function of Au etching time, the length of the Au nanorod decreased symmetrically starting from the two ends, leading to the formation of empty inner space at the ends. Subsequent reduction of Ag ions could be selectively performed in the inner space confined by Pt nanoframes and the resulting Ag-Au-Ag nanorods exhibited characteristic LSPR modes originating from each block component (in a transverse direction) and SPR coupling (in a longitudinal direction). The high quality of the resulting multiblock nanorods enabled observation of the longitudinal quadrupole mode that was induced by Ag-Au SPR coupling in a long axis. The mode exhibited high sensitivity in accordance with the change in the surrounding media, demonstrating great potential for sensor applications.We developed a new method for synthesizing multiblock Ag-Au-Ag nanorods using Pt nanoframes that had been deposited on the edges of Au nanorod seeds. As a function of Au etching time, the length of the Au nanorod decreased symmetrically starting from the two ends, leading to the formation of empty inner space at the ends. Subsequent reduction of Ag ions could be selectively performed in the inner space confined by Pt nanoframes and the resulting Ag-Au-Ag nanorods exhibited characteristic LSPR modes originating from each block component (in a transverse direction) and SPR coupling (in a longitudinal direction). The high quality of the resulting multiblock nanorods enabled observation of the longitudinal quadrupole mode that was induced by Ag-Au SPR coupling in a long axis. The mode exhibited high sensitivity in accordance with the change in the surrounding media, demonstrating great potential for sensor applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr03484e

  2. Corrosion resistance evaluation of Pd-free Ag-Au-Pt-Cu dental alloys.

    PubMed

    Fujita, Takeshi; Shiraishi, Takanobu; Takuma, Yasuko; Hisatsune, Kunihiro

    2011-01-01

    The corrosion resistance of nine experimental Pd-free Ag-Au-Pt-Cu dental alloys in a 0.9% NaCl solution was investigated using cyclic voltammetry (CV), optical microscopy, and scanning electron microscopy (SEM). CV measurements revealed that the breakdown potential (E(bd)) and zero current potential (E(zc)) increased with increasing Au/(Au+Ag) atomic ratio. Thus, the Au/(Au+Ag) atomic ratio, but not the Cu content, influenced the corrosion resistance of Ag-Au-Pt-Cu alloys. After the forward scan of CV, both optical and scanning electron microscope images showed that in all the experimental alloys, the matrix phase was corroded but not the second phase. From corrosion resistance viewpoint, the Ag-Au-Pt-Cu alloys seemed to be suitable for clinical application.

  3. Plasmonic enhancements of photocatalytic activity of Pt/n-Si/Ag photodiodes using Au/Ag core/shell nanorods.

    PubMed

    Qu, Yongquan; Cheng, Rui; Su, Qiao; Duan, Xiangfeng

    2011-10-26

    We report the plasmonic enhancement of the photocatalytic properties of Pt/n-Si/Ag photodiode photocatalysts using Au/Ag core/shell nanorods. We show that Au/Ag core/shell nanorods can be synthesized with tunable plasmon resonance frequencies and then conjugated onto Pt/n-Si/Ag photodiodes using well-defined chemistry. Photocatalytic studies showed that the conjugation with Au/Ag core/shell nanorods can significantly enhance the photocatalytic activity by more than a factor of 3. Spectral dependence studies further revealed that the photocatalytic enhancement is strongly correlated with the plasmonic absorption spectra of the Au/Ag core/shell nanorods, unambiguously demonstrating the plasmonic enhancement effect.

  4. Genetic Pd, Pt, Au, Ag, and Rh mineralogy in Noril'sk sulfide ores

    NASA Astrophysics Data System (ADS)

    Spiridonov, E. M.; Kulagov, E. A.; Serova, A. A.; Kulikova, I. M.; Korotaeva, N. N.; Sereda, E. V.; Tushentsova, I. N.; Belyakov, S. N.; Zhukov, N. N.

    2015-09-01

    The undeformed ore-bearing intrusions of the Noril'sk ore field (NOF) cut through volcanic rocks of the Late Permian-Early Triassic trap association folded in brachysynclines. Due to the nonuniform load on the roof of intrusive bodies, most sulfide melts were squeezed, up to the tops of ore-bearing intrusions; readily fusible Ni-Fe-Cu sulfide melts were almost completely squeezed. In our opinion, not only one but two stages of mineralization developed at the Noril'sk deposits: (i) syntrap magmatic and (ii) epigenetic post-trap metamorphic-hydrothermal. All platinum-group minerals (PGM) and minerals of gold are metasomatic in the Noril'sk ores. They replaced sulfide solid solutions and exsolution structures. All types of PGM and Au minerals occur in the ores, varying in composition from pyrrhotite to chalcopyrite, talnakhite, mooihoekite, and rich in galena; they are localized in the inner and outer contact zones and differ only in the quantitative proportions of ore minerals. The aureoles of PGM and Au-Ag minerals are wider than the contours of sulfide bodies and coincide with halos of fluid impact on orebodies and adjacent host rocks. The pneumatolytic PGM and Au-Ag minerals are correlated in abundance with the dimensions of sulfide bodies. Their amounts are maximal in veins of late fusible ore composed of eutectic PbS ss and iss intergrowths, as well as at their contacts. The Pd and Pt contents in eutectic sulfide ores of NOF are the world's highest. In the process of noble-metal mineral formation, the fluids supply Pd, Pt, Au, As, Sb, Sn, Bi, and a part of Te, whereas Fe, Ni, Cu, Pb, Ag, Rh, a part of Te and Pd are leached from the replaced sulfide minerals. The pneumatolytic PGM of the early stage comprises Pd and Pt intermetallic compounds enriched in Au along with Pd-Pt-Fe-Ni-Cu-Sn-Pb(As) and (Pd,Pt,Au)(Sn,Sb,Bi,Te,As) solid solutions. Pneumatolytic PGM and Au minerals of the middle stage are products of solid-phase transformation and recrystallization of

  5. Tarnish resistance evaluation of experimental Pd-free Ag-Au-Pt-Cu dental alloys.

    PubMed

    Takuma, Yasuko; Shiraishi, Takanobu; Fujita, Takeshi; Hisatsune, Kunihiro

    2010-05-01

    This study evaluated the tarnish resistance of eight experimental Pd-free Ag-Au-Pt-Cu dental alloys in a 0.1% Na(2)S aqueous solution at 37 degrees C. Color measurements of the plate samples were made using a computerized spectrophotometer before and after immersion in the test solution for up to 72 hours. Tarnish discoloration was evaluated using the color difference vector, DeltaE*, in the CIELAB color space. Microstructural observation of each sample through an optical microscope revealed the matrix phase as the major constituent and second-phase small grains in the matrix phase. Selective tarnish discoloration occurred in the matrix, and fractional area of the matrix to the whole surface area was influenced by the sum of Au and Ag concentrations. The DeltaE* value significantly decreased with increasing Au/(Au+Ag) atomic ratio. In conclusion, the Au/(Au+Ag) ratio in an alloy and the fractional area of the matrix were found to be primary and auxiliary factors affecting the tarnish resistance of the experimental alloys.

  6. Atomic structure of water/Au, Ag, Cu and Pt atomic junctions.

    PubMed

    Li, Yu; Kaneko, Satoshi; Fujii, Shintaro; Nishino, Tomoaki; Kiguchi, Manabu

    2017-02-08

    Much progress has been made in understanding the transport properties of atomic-scale conductors. We prepared atomic-scale metal contacts of Cu, Ag, Au and Pt using a mechanically controllable break junction method at 10 K in a cryogenic vacuum. Water molecules were exposed to the metal atomic contacts and the effect of molecular adsorption was investigated by electronic conductance measurements. Statistical analysis of the electronic conductance showed that the water molecule(s) interacted with the surface of the inert Au contact and the reactive Cu ant Pt contacts, where molecular adsorption decreased the electronic conductance. A clear conductance signature of water adsorption was not apparent at the Ag contact. Detailed analysis of the conductance behaviour during a contact-stretching process indicated that metal atomic wires were formed for the Au and Pt contacts. The formation of an Au atomic wire consisting of low coordination number atoms leads to increased reactivity of the inert Au surface towards the adsorption of water.

  7. Beet juice utilization: Expeditious green synthesis of nobel metal nanoparticles (Ag, Au, Pt, and Pd) using microwaves

    EPA Science Inventory

    Metal nanoparticles of Ag, Au, Pt, and Pd were prepared in aqueous solutions via a rapid microwave-assisted green method using beet juice, an abundant sugar-rich agricultural produce, served as both a reducing and a capping reagent. The Ag nanoparticles with capping prepared by b...

  8. M-Au/TiO2 (M = Ag, Pd, and Pt) nanophotocatalyst for overall solar water splitting: role of interfaces

    NASA Astrophysics Data System (ADS)

    Melvin, Ambrose A.; Illath, Kavya; Das, Tanmay; Raja, Thirumalaiswamy; Bhattacharyya, Somnath; Gopinath, Chinnakonda S.

    2015-08-01

    M-Au/TiO2 (M = Ag, Pd, Pt) composites were prepared through a facile one-pot photodeposition synthesis and evaluated for solar water splitting (SWS) with and without a sacrificial agent. The M-Au combination exhibits a dominant role in augmenting the H2 generation activity by forming a bi-metallic system. Degussa P25 was used as a TiO2 substrate to photodeposit Au followed by Au + M (M = Ag/Pd/Pt). The SWS activity of the M-Au/TiO2 was determined through photocatalytic H2 production in the presence of methanol as a sacrificial agent under one sun conditions with an AM1.5 filter. The highest H2 yield was observed for Pt0.5-Au1/TiO2 and was around 1.3 +/- 0.07 mmol h-1 g-1, with an apparent quantum yield (AQY) of 6.4%. Pt0.5-Au1/TiO2 also demonstrated the same activity for 25 cycles of five hours each for 125 h. Critically, the same Pt0.5-Au1/TiO2 catalyst was active in overall SWS (OSWS) without any sacrificial agent, with an AQY = 0.8%. The amount of Au and/or Pt was varied to obtain the optimum composition and it was found that the Pt0.5-Au1/TiO2 composition exhibits the best activity. Detailed characterization by physico-chemical, spectral and microscopy measurements was carried out to obtain an in-depth understanding of the origin of the photocatalytic activity of Pt0.5-Au1/TiO2. These in-depth studies show that gold interacts predominantly with oxygen vacancies present on titania surfaces, and Pt preferentially interacts with gold for an effective electron-hole pair separation at Pt-Au interfaces and electron storage in metal particles. The Pt in Pt0.5-Au1/TiO2 is electronically and catalytically different from the Pt in Pt/TiO2 and it is predicted that the former suppresses the oxygen reduction reaction.M-Au/TiO2 (M = Ag, Pd, Pt) composites were prepared through a facile one-pot photodeposition synthesis and evaluated for solar water splitting (SWS) with and without a sacrificial agent. The M-Au combination exhibits a dominant role in augmenting the H2

  9. A general approach to fabricate diverse noble-metal (Au, Pt, Ag, Pt/Au)/Fe2O3 hybrid nanomaterials.

    PubMed

    Zhang, Jun; Liu, Xianghong; Guo, Xianzhi; Wu, Shihua; Wang, Shurong

    2010-07-19

    A novel, facile, and general one-pot strategy is explored for the synthesis of diverse noble-metal (Au, Pt, Ag, or Pt/Au)/Fe(2)O(3) hybrid nanoparticles with the assistance of lysine (which is a nontoxic, user friendly amino acid that is compatible with organisms) and without using any other functionalization reagents. Control experiments show that lysine, which contains both amino and carboxylic groups, plays dual and crucial roles as both linker and capping agents in attaching noble metals with a small size and uniform distribution onto an Fe(2)O(3) support. Considering the perfect compatibility of lysine with organism, this approach may find potentials in biochemistry and biological applications. Furthermore, this novel route is also an attractive alternative and supplement to the current methods using a silane coupling agent or polyelectrolyte for preparing hybrid nanomaterials. To demonstrate the usage of such hybrid nanomaterials, a chemical gas sensor has been fabricated from the as-synthesized Au/Fe(2)O(3) nanoparticles and investigated for ethanol detection. Results show that the hybrid sensor exhibits significantly improved sensor performances in terms of high sensitivity, low detection limit, better selectivity, and good reproducibility in comparison with pristine Fe(2)O(3). Most importantly, this general approach can be further employed to fabricate other hybrid nanomaterials based on different support materials.

  10. Chemical stability at noble metal M/YBa 2Cu 3O 6.8 interfaces (M = Pt, Ag, Au)

    NASA Astrophysics Data System (ADS)

    Bohnenkamp-Weiss, Ruth; Schmid-Fetzer, Rainer

    1994-02-01

    The chemical compatibility between YBa 2Cu 3O 6.8 (Y123) and Pt, Ag or Au was studied using quasi-infinite diffusion couples which were encapsulated and annealed at 650 to 800°C for 5 to 80 h. The phase formation at the interface was analyzed in cross sections of these couples using optical and scanning electron microscopy together with energy- and wavelength dispersive X-ray microanalysis. In addition, bulk powder mixtures of Y123 with Pt, Ag or Au were annealed at 800°C for 100 h and phase analysis was performed using X-ray diffraction. At the Pt/Y123 interface a reaction zone grows slowly but decisively at 800°C. Its microstructure is multiphase with YCu-oxides and a fine-grained dispersion of Y 2BaCuO 5 (Y211) with BaCu-oxides. Additional BaPt oxides and other phases are seen in powder mixtures annealed for longer times. Barium is suspected to diffuse out from the superconductor along grain boundaries from as deep as 1 mm, causing the decomposition of Y123 into YCu-oxides in the depleted regions. Ag and Au form a stable contact at the interface to Y123 with no reaction zone or new phases. Interdiffusion at the Ag/Y123 interface at 800°C was too low to be clearly detected. In contrast, Au diffuses very fast into Y123 and at 800°C the solubility is 4.2 mass% Au. Yttrium and barium diffuse much slower into the (Au) phase, Cu diffusion was not detected. Weak traces of decomposition products, mostly Y211 and BaCu-oxides, were observed in bulk powder mixtures of Y123 with Ag or Au annealed at 800°C for 100 h in closed capsules. These decomposition products are considered to be due to the high oxygen pressure in the closed capsule, exceeding the stability limit of Y123, and not due to the reduction of Y123. Both Ag and Au are virtually non-reactive with Y123.

  11. Synthesis of highly fluorescent metal (Ag, Au, Pt, and Cu) nanoclusters by electrostatically induced reversible phase transfer.

    PubMed

    Yuan, Xun; Luo, Zhentao; Zhang, Qingbo; Zhang, Xinhai; Zheng, Yuangang; Lee, Jim Yang; Xie, Jianping

    2011-11-22

    This paper reports a simple and scalable method for the synthesis of highly fluorescent Ag, Au, Pt, and Cu nanoclusters (NCs) based on a mild etching environment made possible by phase transfer via electrostatic interactions. Using Ag as a model metal, a simple and fast (total synthesis time < 3 h) phase transfer cycle (aqueous → organic (2 h incubation) → aqueous) has been developed to process originally polydisperse, nonfluorescent, and unstable Ag NCs into monodisperse, highly fluorescent, and extremely stable Ag NCs in the same phase (aqueous) and protected by the same thiol ligand. The synthetic protocol was successfully extended to fabricate highly fluorescent Ag NCs protected by custom-designed peptides with desired functionalities (e.g., carboxyl, hydroxyl, and amine). The facile synthetic method developed in this study should largely contribute to the practical applications of this new class of fluorescence probes.

  12. Different structural preference of Ag(I) and Au(I) in neutral and cationic luminescent heteropolynuclear platinum(II) complexes: Z (U)-shaped Pt2M2 type vs. trinuclear PtM2 type.

    PubMed

    Nishihara, Kazuki; Ueda, Misa; Higashitani, Ami; Nakao, Yoshihide; Arikawa, Yasuhiro; Horiuchi, Shinnosuke; Sakuda, Eri; Umakoshi, Keisuke

    2016-03-28

    The reactions of monocationic Pt(II) complexes bearing N^C chelate ligands and Me2pzH, [Pt(N^C)(Me2pzH)2]PF6 (N^C = 2-phenylpyridinate (ppy(-)), 2-(2,4-difluorophenyl)pyridinate (dfppy(-)), benzo[h]quinolinate (bzq(-)); Me2pzH = 3,5-dimethylpyrazole), with Ag(I) ions gave Z (or U)-shaped neutral tetranuclear Pt2Ag2 complexes [Pt2Ag2(N^C)2(Me2pz)4], while those with Au(I) ions gave neutral trinuclear PtAu2 complexes [PtAu2(N^C)(Me2pz)3]. On the contrary, the reactions of the dicationic Pt(II) complex bearing a N^N chelate ligand and Me2pzH, [Pt(bpy)(Me2pzH)2](PF6)2 (bpy = 2,2'-bipyridine), with Ag(I) and Au(I) ions both gave Z (or U)-shaped dicationic tetranuclear Pt2M2 complexes, [Pt2M2(bpy)2(Me2pz)4](PF6)2 (M = Ag, Au). The structures of heteropolynuclear Pt(II) complexes were dominated by the nature of incorporated group 11 metal ions and the charge of complexes.

  13. Global optimization of bimetallic cluster structures. II. Size-matched Ag-Pd, Ag-Au, and Pd-Pt systems.

    PubMed

    Rossi, Giulia; Ferrando, Riccardo; Rapallo, Arnaldo; Fortunelli, Alessandro; Curley, Benjamin C; Lloyd, Lesley D; Johnston, Roy L

    2005-05-15

    Genetic algorithm global optimization of Ag-Pd, Ag-Au, and Pd-Pt clusters is performed. The 34- and 38-atom clusters are optimized for all compositions. The atom-atom interactions are modeled by a semiempirical potential. All three systems are characterized by a small size mismatch and a weak tendency of the larger atoms to segregate at the surface of the smaller ones. As a result, the global minimum structures exhibit a larger mixing than in Ag-Cu and Ag-Ni clusters. Polyicosahedral structures present generally favorable energetic configurations, even though they are less favorable than in the case of the size-mismatched systems. A comparison between all the systems studied here and in the previous paper (on size-mismatched systems) is presented.

  14. Room temperature syntheses of AuF{sub 6}{sup {minus}} and PtF{sub 6}{sup {minus}} salts, Ag{sup +}AuF{sub 6}{sup {minus}}, Ag{sup 2+}PtF{sub 6}{sup 2{minus}}, and Ag{sup 2+}PdF{sub 6}{sup 2{minus}}, and an estimate for E (MF{sub 6}{sup {minus}}) [M = Pt, Pd

    SciTech Connect

    Graudejus, O.; Elder, S.H.; Lucier, G.M.; Shen, C.; Bartlett, N. |

    1999-05-17

    Solutions of AuF{sub 4}{sup {minus}} or PtF{sub 6}{sup 2{minus}} salts, prepared from the metals at {approximately}20 C, in liquid anhydrous hydrogen fluoride (aHF), made basic with alkali fluorides, are further oxidized by photodissociated F{sub 2} (visible or near-UV light) to give AuF{sub 6}{sup {minus}} or PtF{sub 6}{sup {minus}} salts, including O{sub 2}{sup +}AuF{sub 6}{sup {minus}} (with O{sub 2} in the F{sub 2}). Similar photochemical oxidation of PdF{sub 6}{sup 2{minus}} salts does not occur. This new synthetic approach has provided LiAuF{sub 6} and LiPtF{sub 6} for the first time, each of which has the LiSbF{sub 6} type (R{bar 3}) structure with (hexagonal cell). New cubic modifications (probable space group Ia3) have been found for AgMF{sub 6}. The preference for Ag{sup 2+}Pt(Pd)F{sub 6}{sup 2{minus}} over Ag{sup +}Pt(Pd)F{sub 6}{sup {minus}} is attributed to a second electron affinity of Pt(Pd)F{sub 6}, E(Pt(Pd)F{sub 6}{sup {minus}}) > 60 kcal/mol.

  15. Reducing the Ideal Shear Strengths of ZrB2 by High Efficient Alloying Elements (Ag, Au, Pd and Pt).

    PubMed

    Dai, Fu-Zhi; Zhou, Yanchun

    2017-02-24

    Activating the plasticity of ZrB2 is a promising approach to improve its key properties for applications in hypersonic vehicles, including high temperature strength and thermal shock resistance. The present work demonstrates that ideal shear strength of ZrB2, which is a good indicator of the critical stress for dislocation nucleation, can be significantly reduced by dissolving of appropriate alloying elements. Analyzing on the bonding nature of ZrB2 reveals that choosing alloying elements with low energy valence electrons will prevent electron transferring from alloying element to the electron deficient B-B π orbits, which will reduce the local stability of the region surrounding the alloying element. Under the criterion, elements with d electrons tending to be full-filled (Ag, Au, Pd and Pt, the full-filled state is associated with low energy level) are selected as promising candidates with their prominent efficiency in reducing ideal shear strengths verified by first-principles calculations. The results provide useful guidelines for further designs of ZrB2 based materials, especially for improving their mechanical properties.

  16. Reducing the Ideal Shear Strengths of ZrB2 by High Efficient Alloying Elements (Ag, Au, Pd and Pt)

    NASA Astrophysics Data System (ADS)

    Dai, Fu-Zhi; Zhou, Yanchun

    2017-02-01

    Activating the plasticity of ZrB2 is a promising approach to improve its key properties for applications in hypersonic vehicles, including high temperature strength and thermal shock resistance. The present work demonstrates that ideal shear strength of ZrB2, which is a good indicator of the critical stress for dislocation nucleation, can be significantly reduced by dissolving of appropriate alloying elements. Analyzing on the bonding nature of ZrB2 reveals that choosing alloying elements with low energy valence electrons will prevent electron transferring from alloying element to the electron deficient B-B π orbits, which will reduce the local stability of the region surrounding the alloying element. Under the criterion, elements with d electrons tending to be full-filled (Ag, Au, Pd and Pt, the full-filled state is associated with low energy level) are selected as promising candidates with their prominent efficiency in reducing ideal shear strengths verified by first-principles calculations. The results provide useful guidelines for further designs of ZrB2 based materials, especially for improving their mechanical properties.

  17. Reducing the Ideal Shear Strengths of ZrB2 by High Efficient Alloying Elements (Ag, Au, Pd and Pt)

    PubMed Central

    Dai, Fu-Zhi; Zhou, Yanchun

    2017-01-01

    Activating the plasticity of ZrB2 is a promising approach to improve its key properties for applications in hypersonic vehicles, including high temperature strength and thermal shock resistance. The present work demonstrates that ideal shear strength of ZrB2, which is a good indicator of the critical stress for dislocation nucleation, can be significantly reduced by dissolving of appropriate alloying elements. Analyzing on the bonding nature of ZrB2 reveals that choosing alloying elements with low energy valence electrons will prevent electron transferring from alloying element to the electron deficient B-B π orbits, which will reduce the local stability of the region surrounding the alloying element. Under the criterion, elements with d electrons tending to be full-filled (Ag, Au, Pd and Pt, the full-filled state is associated with low energy level) are selected as promising candidates with their prominent efficiency in reducing ideal shear strengths verified by first-principles calculations. The results provide useful guidelines for further designs of ZrB2 based materials, especially for improving their mechanical properties. PMID:28233838

  18. Copper-based alloys, crystallographic and crystallochemical parameters of alloys in binary systems Cu-Me (Me=Co, Rh, Ir, Cu, Ag, Au, Ni, Pd, Pt)

    NASA Astrophysics Data System (ADS)

    Porobova, Svetlana; Markova, Tat'jana; Klopotov, Vladimir; Klopotov, Anatoliy; Loskutov, Oleg; Vlasov, Viktor

    2016-01-01

    The article presents the results of the analysis of phase equilibrium of ordered phases in binary systems based on copper Cu- Me (where Me - Co, Rh, Ir, Ag, Au, Ni, Pd, Pt) to find correlations of crystallochemical and crystallographic factors. It is established that the packing index in disordered solid solutions in binary systems based on copper is close to the value of 0.74 against the background of an insignificant deviation of atomic volumes from the Zen's law.

  19. Copper-based alloys, crystallographic and crystallochemical parameters of alloys in binary systems Cu-Me (Me=Co, Rh, Ir, Cu, Ag, Au, Ni, Pd, Pt)

    SciTech Connect

    Porobova, Svetlana Loskutov, Oleg; Markova, Tat’jana; Klopotov, Vladimir; Klopotov, Anatoliy; Vlasov, Viktor

    2016-01-15

    The article presents the results of the analysis of phase equilibrium of ordered phases in binary systems based on copper Cu- Me (where Me - Co, Rh, Ir, Ag, Au, Ni, Pd, Pt) to find correlations of crystallochemical and crystallographic factors. It is established that the packing index in disordered solid solutions in binary systems based on copper is close to the value of 0.74 against the background of an insignificant deviation of atomic volumes from the Zen’s law.

  20. @AuAg nanostructures

    NASA Astrophysics Data System (ADS)

    Singh, Rina; Soni, R. K.

    2014-09-01

    Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric-metal-metal (DMM) system consisting of a particle with a dielectric core (Al@Al2O3), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al2O3@Ag@Au and Al@Al2O3@AgAu triple-layered core-shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core-shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core-shell Al@Al2O3. The Al@Al2O3 particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al2O3@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al2O3@Ag@Au core-shell or Al@Al2O3@AgAu alloy. The formation of core-shell and alloy nanostructure was confirmed by UV-visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400-520 nm with increasing ablation time suggesting formation of Ag-Au alloy in the presence of alumina particles in the solution.

  1. [Quantitative surface analysis of Pt-Co, Cu-Au and Cu-Ag alloy films by XPS and AES].

    PubMed

    Li, Lian-Zhong; Zhuo, Shang-Jun; Shen, Ru-Xiang; Qian, Rong; Gao, Jie

    2013-11-01

    In order to improve the quantitative analysis accuracy of AES, We associated XPS with AES and studied the method to reduce the error of AES quantitative analysis, selected Pt-Co, Cu-Au and Cu-Ag binary alloy thin-films as the samples, used XPS to correct AES quantitative analysis results by changing the auger sensitivity factors to make their quantitative analysis results more similar. Then we verified the accuracy of the quantitative analysis of AES when using the revised sensitivity factors by other samples with different composition ratio, and the results showed that the corrected relative sensitivity factors can reduce the error in quantitative analysis of AES to less than 10%. Peak defining is difficult in the form of the integral spectrum of AES analysis since choosing the starting point and ending point when determining the characteristic auger peak intensity area with great uncertainty, and to make analysis easier, we also processed data in the form of the differential spectrum, made quantitative analysis on the basis of peak to peak height instead of peak area, corrected the relative sensitivity factors, and verified the accuracy of quantitative analysis by the other samples with different composition ratio. The result showed that the analytical error in quantitative analysis of AES reduced to less than 9%. It showed that the accuracy of AES quantitative analysis can be highly improved by the way of associating XPS with AES to correct the auger sensitivity factors since the matrix effects are taken into account. Good consistency was presented, proving the feasibility of this method.

  2. Resonant core spectroscopies of the charge transfer interactions between C60 and the surfaces of Au(111), Ag(111), Cu(111) and Pt(111)

    NASA Astrophysics Data System (ADS)

    Gibson, Andrew J.; Temperton, Robert H.; Handrup, Karsten; O'Shea, James N.

    2017-03-01

    Charge transfer interactions between C60 and the metal surfaces of Ag(111), Cu(111), Au(111) and Pt(111) have been studied using synchrotron-based photoemission, resonant photoemission and X-ray absorption spectroscopies. By placing the X-ray absorption and valence band spectra on a common binding energy scale, the energetic overlap of the unoccupied molecular orbitals with the density of states of the underlying metal surface have been assessed in the context of possible charge transfer pathways. Resonant photoemission and resonant Auger data, measuring the valence region as a function of photon energy for C60 adsorbed on Au(111) reveals three constant high kinetic energy features associated with Auger-like core-hole decay involving an electron transferred from the surface to the LUMO of the molecule and electrons from the three highest occupied molecular orbitals, respectively and in the presence of ultra-fast charge transfer of the originally photoexcited molecule to the surface. Data for the C60/Ag(111) surface reveals an additional Auger-like feature arising from a core-hole decay process involving more than one electron transferred from the surface into the LUMO. An analysis of the relative abundance of these core-hole decay channels estimates that on average 2.4 ± 0.3 electrons are transferred from the Ag(111) surface into the LUMO. A core-hole clock analysis has also been applied to assess the charge transfer coupling in the other direction, from the molecule to the Au(111) and Ag(111) surfaces. Resonant photoemission and resonant Auger data for C60 molecules adsorbed on the Pt(111) and Cu(111) surfaces are shown to exhibit no super-Auger features, which is attributed to the strong modification of the unoccupied molecular orbitals arising from stronger chemical coupling of the molecule to the surface.

  3. Heterogeneous Au-Pt nanostructures with enhanced catalytic activity toward oxygen reduction.

    PubMed

    Ye, Feng; Liu, Hui; Hu, Weiwei; Zhong, Junyu; Chen, Yingying; Cao, Hongbin; Yang, Jun

    2012-03-14

    Heterogeneous Au-Pt nanostructures have been synthesized using a sacrificial template-based approach. Typically, monodispersed Au nanoparticles are prepared first, followed by Ag coating to form core-shell Au-Ag nanoparticles. Next, the galvanic replacement reaction between Ag shells and an aqueous H(2)PtCl(6) solution, whose chemical reaction can be described as 4Ag + PtCl(6)(2-)→ Pt + 4AgCl + 2Cl(-), is carried out at room temperature. Pure Ag shell is transformed into a shell made of Ag/Pt alloy by galvanic replacement. The AgCl formed simultaneously roughens the surface of alloy Ag-Pt shells, which can be manipulated to create a porous Pt surface for oxygen reduction reaction. Finally, Ag and AgCl are removed from core-shell Au-Ag/Pt nanoparticles using bis(p-sulfonatophenyl)phenylphosphane dihydrate dipotassium salt to produce heterogeneous Au-Pt nanostructures. The heterogeneous Au-Pt nanostructures have displayed superior catalytic activity towards oxygen reduction in direct methanol fuel cells because of the electronic coupling effect between the inner-placed Au core and the Pt shell.

  4. The growth, structure, and thermal stability of vapor deposited ultra-thin metal films: Rh on Ag(100), Au on Pd(110), and Pt on Pd(110)

    SciTech Connect

    Schmitz, P.

    1990-09-21

    The growth, structure, and thermal stability of ultra-thin metal films (Rh on Ag(100); Au on Pd(110) and Pt on Pd(110)) is investigated using surface sensitive techniques. The three systems studied present a variety of differing characteristics which can contribute to the growth mode, two-dimensional structure, and thermal stability of the films. The main factors contributing to the differing properties of the three systems presented here are: (1) the different substrate morphologies; (2) the differences in surface free energies between the overlayer and the substrate; (3) the degree of lattice mismatch for a particular system; and (4) the extent of miscibility of the two metals. 200 refs., 38 figs.

  5. Search for strangelets and other rare objects in Au + Pt collisions at the AGS using a fixed-angle focusing spectrometer

    SciTech Connect

    Rusek, A.; Bassalleck, B.; Fischer, H.; Berdoz, A.; Franklin, G.B.; Buerger, T.; Burger, M.; Chrien, R.E.; Diebold, G.E.; En`yo, H.

    1995-12-31

    During the 1993 AGS heavy ion run, experiment E886 conducted a strangelet search in Au + Pt reactions, with beam momentum of 10.8 GeV/c per nucleon. Presented here are the upper limit for strangelet production, invariant cross sections for p, t, d, {sup 3}He, {sup 4}He, {sup 6}He, {sup 8}He, {sup 6}Li, {sup 7}Li, {sup 8}Li and {sup 7}Be, along with a demonstration of their agreement with a coalescence model fit to data collected by E886 during the 1992 engineering run, and upper limits for production cross sections for other rare objects, such as (H dibaryon)-nucleus systems. All results reported are preliminary.

  6. Designed synthesis of MOx (M = Zn, Fe, Sn, Ni, Mn, Co, Ce, Mg, Ag), Pt, and Au nanoparticles supported on hierarchical CuO hollow structures.

    PubMed

    Zhang, Zailei; Jung, Ji Chul; Yan, Ning

    2016-12-01

    Despite intensive research into support substrates for the dispersal of nanoparticles and their applications, there has been a lack of general methods to produce metal oxide hollow substrates supporting a wide range of metal and metal oxides. Herein, a synthetic protocol for the preparation of CuO hollow structure-supported MOx (M = Zn, Fe, Ni, Sn, Mn, Co, Ce, Mg, and Ag) and noble metals (Pt and Au) with the desired properties and shell structure, such as CuO/Fe2O3, CuO/ZnO, CuO/SnO2, CuO/MgO, CuO/NiO, CuO/Mn2O3, CuO/CoO, CuO/CeO2, CuO/Ag2O, CuO/Pt, CuO/Au hollow cubes, CuO/ZnO double-shell hollow cubes, CuO/SnO2 double-shell hollow octahedra, CuO/SnO2/Fe2O3 and CuO/Mn2O3/NiO double-shell hollow cubes, was developed based on controlled calcination and etching. These hybrid hollow structures were employed not only as support substrates but also as active constituents for catalytic reactions. As an example, we demonstrated that CuO/ZnO hollow cubes are remarkably efficient in converting solid chitin biomass to liquid chemicals in methanol. In addition, CuO/ZnO double-shell hollow cubes were highly effective in the oxidation of benzyl alcohol in the presence of H2O2, whereas CuO/Pt and CuO/Au hollow cubes promoted the oxidation of benzyl alcohol in pure O2. The strategy developed in this work extends the controllable fabrication of high-quality CuO hollow structure-supported nanoparticles using various compositions and shell structures, paving the way to the exploration and systematic comparison of these materials in a wider range of applications.

  7. Facile Routes to NiF(6)(2)(-), AgF(4)(-), AuF(6)(-), and PtF(6)(-) Salts Using O(2)(+) as a Source of O(2)F in Anhydrous HF.

    PubMed

    Lucier, G. M.; Shen, C.; Elder, S. H.; Bartlett, N.

    1998-07-27

    O(2)(+) salts dissolved in liquid anhydrous hydrogen fluoride (aHF) at 20 degrees C or below oxidize aHF solutions of PtF(6)(2)(-) to PtF(6)(-). The parent base of O(2)(+) salts in aHF (O(2)F((solv))) generated with alkali fluoride is long-lived below -50 degrees C. An aHF solution of O(2)F((solv)) oxidizes Au(III) to Au(V) below -50 degrees C (2O(2)F((solv)) + AuF(4)(-)((solv)) --> AuF(6)(-)((solv)) +2O(2(g))). In situ generation of O(2)F((solv)) (O(2)(+)((solv)) + F(-)((solv)) --> O(2)F((solv))) with AgF(2) or NiF(2) in suspension in the aHF made basic with alkali fluoride gives AgF(4)(-) and NiF(6)(2)(-)salts. Low solubility of AAsF(6)(A = Cs, K) in aHF provides for the metathetical preparation of (O(2))(2)PdF(6) solutions in aHF. Removal of aHF, even at -60 degrees C, results in some O(2) and F(2) loss, to a composition approaching (O(2))PdF(5).

  8. Transition voltages of vacuum-spaced and molecular junctions with Ag and Pt electrodes

    SciTech Connect

    Wu, Kunlin; Bai, Meilin; Hou, Shimin; Sanvito, Stefano

    2014-07-07

    The transition voltage of vacuum-spaced and molecular junctions constructed with Ag and Pt electrodes is investigated by non-equilibrium Green's function formalism combined with density functional theory. Our calculations show that, similarly to the case of Au-vacuum-Au previously studied, the transition voltages of Ag and Pt metal-vacuum-metal junctions with atomic protrusions on the electrode surface are determined by the local density of states of the p-type atomic orbitals of the protrusion. Since the energy position of the Pt 6p atomic orbitals is higher than that of the 5p/6p of Ag and Au, the transition voltage of Pt-vacuum-Pt junctions is larger than that of both Ag-vacuum-Ag and Au-vacuum-Au junctions. When one moves to analyzing asymmetric molecular junctions constructed with biphenyl thiol as central molecule, then the transition voltage is found to depend on the specific bonding site for the sulfur atom in the thiol group. In particular agreement with experiments, where the largest transition voltage is found for Ag and the smallest for Pt, is obtained when one assumes S binding at the hollow-bridge site on the Ag/Au(111) surface and at the adatom site on the Pt(111) one. This demonstrates the critical role played by the linker-electrode binding geometry in determining the transition voltage of devices made of conjugated thiol molecules.

  9. Intermetallic compounds of the heaviest elements and their homologs: The electronic structure and bonding of MM', where M =Ge, Sn, Pb, and element 114, and M'=Ni, Pd, Pt, Cu, Ag, Au, Sn, Pb, and element 114

    NASA Astrophysics Data System (ADS)

    Pershina, V.; Anton, J.; Fricke, B.

    2007-10-01

    Fully relativistic (four-component) density-functional theory calculations were performed for intermetallic dimers MM', where M =Ge, Sn, Pb, and element 114, and M'=group 10 elements (Ni, Pd, and Pt) and group 11 elements (Cu, Ag, and Au). PbM and 114M, where M are group 14 elements, were also considered. The results have shown that trends in spectroscopic properties—atomization energies De, vibrational frequencies ωe, and bond lengths Re, as a function of M', are similar for compounds of Ge, Sn, Pb, and element 114, except for De of PbNi and 114Ni. They were shown to be determined by trends in the energies and space distribution of the valence ns(M ') atomic orbitals (AOs). According to the results, element 114 should form the weakest bonding with Ni and Ag, while the strongest with Pt due to the largest involvement of the 5d(Pt) AOs. In turn, trends in the spectroscopic properties of MM' as a function of M were shown to be determined by the behavior of the np1/2(M ) AOs. Overall, De of the element 114 dimers are about 1eV smaller and Re are about 0.2a.u. larger than those of the corresponding Pb compounds. Such a decrease in bonding of the element 114 dimers is caused by the large SO splitting of the 7p orbitals and a decreasing contribution of the relativistically stabilized 7p1/2(114) AO. On the basis of the calculated De for the dimers, adsorption enthalpies of element 114 on the corresponding metal surfaces were estimated: They were shown to be about 100-150kJ/mol smaller than those of Pb.

  10. Novel mitoviruses in Rhizoctonia solani AG-3PT infecting potato.

    PubMed

    Das, Subha; Falloon, Richard E; Stewart, Alison; Pitman, Andrew R

    2016-03-01

    Double-stranded RNA (dsRNA) elements are ubiquitous in Rhizoctonia solani. Total dsRNA was randomly amplified from a R. solani isolate (RS002) belonging to anastomosis group-3PT (AG-3PT), associated with black scurf in potato. Assembly of resulting cDNA sequences identified a nearly complete genome of a novel virus related to the genus Mitovirus (family Narnaviridae), herein named Rhizoctonia mitovirus 1 RS002 (RMV-1-RS002). The 2797 nucleotide partial genome of RMV-1-RS002 is A-U rich (59.06 %), and can be folded into stable stem-loop structures at 5' and 3' ends. Universal and mold mitochondrial codon usages revealed a large open reading frame in the genome, putatively encoding an 826 amino acid polypeptide, which has conserved motifs for mitoviral RNA-dependent RNA polymerase. The full length putative polypeptide shared 25.6 % sequence identity with the corresponding region of Tuber excavatum mitovirus (TeMV). The partial genome of a second mitovirus (proposed name Rhizoctonia mitovirus 2 RS002 (RMV-2-RS002)) was also amplified from RS002. A nearly identical copy of RMV-1-RS002 was detected in two additional AG-3PT isolates. These data indicate that multiple mitoviruses can exist in a single isolate of R. solani AG-3PT, and that mitoviruses such as RMV-1-RS002 are probably widespread in this pathogen. The roles of mitoviruses in the biology of R. solani AG-3PT remain unknown.

  11. Electrical properties of thin-film structures formed by pulsed laser deposition of Au, Ag, Cu, Pd, Pt, W, Zr metals on n-6H-SiC crystal

    SciTech Connect

    Romanov, R. I.; Zuev, V. V.; Fominskii, V. Yu. Demin, M. V.; Grigoriev, V. V.

    2010-09-15

    Diode structures with ideality factors of 1.28-2.14 and potential barriers from 0.58 to 0.62 eV on the semiconductor side were formed by pulsed laser deposition of Au, Ag, Cu, Pd, Pt, W, and Zr metal films on n-6H-SiC crystal without epitaxial layer preparation. A high density of surface acceptor and donor states was formed at the metal-semiconductor interface during deposition of the laser-induced atomic flux, which violated the correlation between the potential barrier height and metal work function. The barrier heights determined from characteristic currents and capacitance measurements were in quite good agreement. For the used low-resistance semiconductor and contact elements, the sizes of majority carrier (electron) depletion regions were determined as 26-60 nm.

  12. The role of charge transfer in the oxidation state change of Ce atoms in the TM13-CeO2(111) systems (TM = Pd, Ag, Pt, Au): a DFT + U investigation.

    PubMed

    Tereshchuk, Polina; Freire, Rafael L H; Ungureanu, Crina G; Seminovski, Yohanna; Kiejna, Adam; Da Silva, Juarez L F

    2015-05-28

    Despite extensive studies of transition metal (TM) clusters supported on ceria (CeO2), fundamental issues such as the role of the TM atoms in the change in the oxidation state of Ce atoms are still not well understood. In this work, we report a theoretical investigation based on static and ab initio molecular dynamics density functional theory calculations of the interaction of 13-atom TM clusters (TM = Pd, Ag, Pt, Au) with the unreduced CeO2(111) surface represented by a large surface unit cell and employing Hubbard corrections for the strong on-site Coulomb correlation in the Ce f-electrons. We found that the TM13 clusters form pyramidal-like structures on CeO2(111) in the lowest energy configurations with the following stacking sequence, TM/TM4/TM8/CeO2(111), while TM13 adopts two-dimensional structures at high energy structures. TM13 induces a change in the oxidation state of few Ce atoms (3 of 16) located in the topmost Ce layer from Ce(IV) (itinerant Ce f-states) to Ce(III) (localized Ce f-states). There is a charge flow from the TM atoms to the CeO2(111) surface, which can be explained by the electronegativity difference between the TM (Pd, Ag, Pt, Au) and O atoms, however, the charge is not uniformly distributed on the topmost O layer due to the pressure induced by the TM13 clusters on the underlying O ions, which yields a decrease in the ionic charge of the O ions located below the cluster and an increase in the remaining O ions. Due to the charge flow mainly from the TM8-layer to the topmost O-layer, the charge cannot flow from the Ce(IV) atoms to the O atoms with the same magnitude as in the clean CeO2(111) surface. Consequently, the effective cationic charge decreases mainly for the Ce atoms that have a bond with the O atoms not located below the cluster, and hence, those Ce atoms change their oxidation state from IV to III. This increases the size of the Ce(III) compared with the Ce(IV) cations, which builds-in a strain within the topmost Ce layer, and

  13. Advanced catalytic performance of Au-Pt double-walled nanotubes and their fabrication through galvanic replacement reaction.

    PubMed

    Chen, Lu; Kuai, Long; Yu, Xue; Li, Wenzheng; Geng, Baoyou

    2013-08-26

    Bimetallic tubular nanostructures have been the focus of intensive research as they have very interesting potential applications in various fields including catalysis and electronics. In this paper, we demonstrate a facile method for the fabrication of Au-Pt double-walled nanotubes (Au-Pt DWNTs). The DWNTs are fabricated through the galvanic displacement reaction between Ag nanowires and various metal ions, and the Au-Pt DWNT catalysts exhibit high active catalytic performances toward both methanol electro-oxidation and 4-nitrophenol (4-NP) reduction. First, they have a high electrochemically active surface area of 61.66 m(2)  g(-1), which is close to the value of commercial Pt/C catalysts (64.76 m(2) g(-1)), and the peak current density of Au-Pt DWNTs in methanol oxidation is recorded as 138.25 mA mg(-1), whereas those of Pt nanotubes, Au/Pt nanotubes (simple mixture), and commercial Pt/C are 24.12, 40.95, and 120.65 mA mg(-1), respectively. The Au-Pt DWNTs show a markedly enhanced electrocatalytic activity for methanol oxidation compared with the other three catalysts. They also show an excellent catalytic performance in comparison with common Au nanotubes for 4-nitrophenol (4-NP) reduction. The attractive performance exhibited by these prepared Au-Pt DWNTs can be attributed to their unique structures, which make them promising candidates as high-performance catalysts.

  14. Optical nonlinearities of Au nanoparticles and Au/Ag coreshells.

    PubMed

    Seo, Jae Tae; Yang, Qiguang; Kim, Wan-Joong; Heo, Jinhwa; Ma, Seong-Min; Austin, Jasmine; Yun, Wan Soo; Jung, Sung Soo; Han, Sang Woo; Tabibi, Bagher; Temple, Doyle

    2009-02-01

    Au nanoparticles exhibited both negative and positive nonlinear absorptions with ground-state plasmon bleaching and free-carrier absorption that could be origins of the saturable and reverse-saturable optical properties. Au/Ag coreshells displayed only positive nonlinear absorption and reverse-saturable optical properties as a function of excitation intensity at the edge of surface-plasmon resonance, which implies no ground-state plasmon bleaching and the existence of two-photon absorption.

  15. LaMgX and CeMgX (X = Ga, In, Tl, Pd, Ag, Pt, Au) with ZrNiAl type structure - A systematic view on electronic structure and chemical bonding

    NASA Astrophysics Data System (ADS)

    Matar, Samir F.; Etourneau, Jean; Pöttgen, Rainer

    2015-05-01

    The intermetallic magnesium compounds LaMgX and CeMgX (X = Ga, In, Tl, Pd, Ag, Pt, Au) crystallize with the hexagonal ZrNiAl type structure, space group P 6 bar 2 m , with full Mg-X ordering. From density functional theory calculations carried out exemplarily on four representative compounds: LaMgX and CeMgX with X = Ga, Pd, significant differences were traced out as to the magnetism arising only for the Ce series leading to identify CeMgGa as an antiferromagnet in its ground state, in agreement with experiment. The bulk module magnitudes show the trend of harder transition metal based ternaries and the cohesive energies favor the X = Pd compounds versus X = Ga ones. Such features were clarified by examining the properties of chemical bonding which exhibit more directional bonds thanks to the Pd d states. Rationalizing the trends of charge transfers, negatively charged triel and transition element atoms are observed. The resulting chemical pictures assign these compounds as gallides and palladides.

  16. Probing the rupture of a Ag atomic junction in a Ag-Au mixed electrode

    NASA Astrophysics Data System (ADS)

    Kim, Taekyeong

    2015-09-01

    We probed that the atomic junction in Ag part ruptures during stretching of atomic sized contacts of Ag-Au mixed electrodes, resulting in Ag-Ag electrodes through a scanning tunneling microscope breaking junction (STM-BJ) technique. We observed that the conductance and tunneling decay constant for a series of amine-terminated oligophenyl molecular junctions are essentially the same for the Ag-Au mixed and the Ag-Ag electrodes. We also found the molecular plateau length and the evolution patterns with the Ag-Au mixed electrodes are similar to those with Ag-Ag electrodes rather than the Au-Au electrodes in the molecular junction elongation. This result is attributed to the smaller binding energy of Ag atoms compared to that of Au atoms, so the Ag junction part is more easily broken than that of Au part in stretching of Ag-Au mixed electrodes. Furthermore, we successfully observed that the rupture force of the atomic junction for the Ag-Au mixed electrodes was identical to that for the Ag-Ag electrodes and smaller than that for the Au-Au electrodes. This study may advance the understanding of the electrical and the mechanical properties in molecular devices with Ag and Au electrodes in future.

  17. Optical properties and electronic structures of d- and f-electron metals and alloys, Ag-In, Ni-Cu, AuGa sub 2 , PtGa sub 2 ,. beta. prime -NiAl,. beta. prime -CoAl, CeSn sub 3 , and LaSn sub 3

    SciTech Connect

    Kim, Kwang Joo.

    1990-10-17

    Optical properties and electronic structures of disordered Ag{sub 1- x}In{sub x}(x = 0.0, 0.04, 0.08, 0.12) and Ni{sub 1-x}Cu{sub x} (x = 0.0, 0.1, 0.3, 0.4) alloys and ordered AuGa{sub 2}, PtGa{sub 2}, {beta}{prime}-NiAl, {beta}{prime}-CoAl, CeSn{sub 3}, and LaSn{sub 3} have been studied. The complex dielectric functions have been determined for Ag{sub 1-x}In{sub x}, Ni{sub 1-x}Cu{sub x}, AuGa{sub 2}, and PtGa{sub 2} in the 1.2--5.5 eV region and for CeSn{sub 3} and LaSn{sub 3} in the 1.5--4.5 eV region using spectroscopic ellipsometry. Self-consistent relativistic band calculations using the linearized-augmented-plane-wave method have been performed for AuGa{sub 2}, PtGa{sub 2}, {beta}{prime}-NiAl, {beta}{prime}-CoAl, CeSn{sub 3}, and LaSn{sub 3} to interpret the experimental optical spectra.

  18. Effect of Ag Templates on the Formation of Au-Ag Hollow/Core-Shell Nanostructures.

    PubMed

    Tsai, Chi-Hang; Chen, Shih-Yun; Song, Jenn-Ming; Haruta, Mitsutaka; Kurata, Hiroki

    2015-12-01

    Au-Ag alloy nanostructures with various shapes were synthesized using a successive reduction method in this study. By means of galvanic replacement, twined Ag nanoparticles (NPs) and single-crystalline Ag nanowires (NWs) were adopted as templates, respectively, and alloyed with the same amount of Au(+) ions. High angle annular dark field-scanning TEM (HAADF-STEM) images observed from different rotation angles confirm that Ag NPs turned into AuAg alloy rings with an Au/Ag ratio of 1. The shifts of surface plasmon resonance and chemical composition reveal the evolution of the alloy ring formation. On the other hand, single-crystalline Ag NWs became Ag@AuAg core-shell wires instead of hollow nanostructure through a process of galvanic replacement. It is proposed that in addition to the ratio of Ag templates and Au ion additives, the twin boundaries of the Ag templates were the dominating factor causing hollow alloy nanostructures.

  19. Diffusion and solid state reactions in Fe/Ag/Pt and FePt/Ag thin-film systems

    NASA Astrophysics Data System (ADS)

    Katona, G. L.; Safonova, N. Y.; Ganss, F.; Mitin, D.; Vladymyrskyi, I. A.; Sidorenko, S. I.; Makogon, Iu N.; Beddies, G.; Albrecht, M.; Beke, D. L.

    2015-05-01

    Depth profiles of tri-layered Fe(15 nm)/Ag(10 nm)/Pt(15 nm)/SiO2(100 nm)/Si(1 0 0) and bi-layered Fe50Pt50(15 nm)/Ag(7.5 nm)/SiO2(100 nm)/Si(1 0 0) thin films after different heat treatments were investigated by secondary neutral mass spectrometry. Isotherm annealing of the tri-layered samples was carried out between 245 and 390 °C up to several hours, while isochrone thermal annealing was performed between 600 and 900 °C for 30 s. Composition profiles, obtained after isotherm heat treatment, show that initially there was a strong intermixing between Ag and Pt, resulting most likely in the formation of an AgxPt1-x reaction layer. Furthermore, the intermixing process was much faster in the Ag layer accompanied by the segregation of Ag to the substrate/Pt interface. Later on the Pt, which diffused through the Ag layer, started to penetrate into the Fe grain boundaries. This process led to the formation of the FePt reaction product. At the same time as the Pt diffused into the Fe layer, reducing the amount of Pt in the AgxPt1-x layer, the Ag appeared to ‘move’ towards the substrate. Finally, an almost fully homogeneous FePt alloy layer formed with some FePt present in the grain boundaries of the remaining Ag. This behavior was compared to both types of samples subjected to isochrone thermal annealing. High temperature treatments resulted in similar results and eventually in the formation of a homogeneous L10 ordered FePt alloy with randomly distributed Ag in the grain boundaries and at the free surface.

  20. Global optimization of bimetallic cluster structures. I. Size-mismatched Ag-Cu, Ag-Ni, and Au-Cu systems.

    PubMed

    Rapallo, Arnaldo; Rossi, Giulia; Ferrando, Riccardo; Fortunelli, Alessandro; Curley, Benjamin C; Lloyd, Lesley D; Tarbuck, Gary M; Johnston, Roy L

    2005-05-15

    A genetic algorithm approach is applied to the optimization of the potential energy of a wide range of binary metallic nanoclusters, Ag-Cu, Ag-Ni, Au-Cu, Ag-Pd, Ag-Au, and Pd-Pt, modeled by a semiempirical potential. The aim of this work is to single out the driving forces that make different structural motifs the most favorable at different sizes and chemical compositions. Paper I is devoted to the analysis of size-mismatched systems, namely, Ag-Cu, Ag-Ni, and Au-Cu clusters. In Ag-Cu and Ag-Ni clusters, the large size mismatch and the tendency of Ag to segregate at the surface of Cu and Ni lead to the location of core-shell polyicosahedral minimum structures. Particularly stable polyicosahedral clusters are located at size N = 34 (at the composition with 27 Ag atoms) and N = 38 (at the composition with 32 and 30 Ag atoms). In Ag-Ni clusters, Ag32Ni13 is also shown to be a good energetic configuration. For Au-Cu clusters, these core-shell polyicosahedra are less common, because size mismatch is not reinforced by a strong tendency to segregation of Au at the surface of Cu, and Au atoms are not well accommodated upon the strained polyicosahedral surface.

  1. Isomorphism and solid solutions among Ag- and Au-selenides

    NASA Astrophysics Data System (ADS)

    Palyanova, Galina A.; Seryotkin, Yurii V.; Kokh, Konstantin A.; Bakakin, Vladimir V.

    2016-09-01

    Au-Ag selenides were synthesized by heating stoichiometric mixtures of elementary substances of initial compositions Ag2-xAuxSe with a step of x=0.25 (0≤x≤2) to 1050 °C and annealing at 500 °C. Scanning electron microscopy, optical microscopy, electron microprobe analysis and X-ray powder diffraction methods have been applied to study synthesized samples. Results of studies of synthesized products revealed the existence of three solid solutions with limited isomorphism Ag↔Au: naumannite Ag2Se - Ag1.94Au0.06Se, fischesserite Ag3AuSe2 - Ag3.2Au0.8Se2 and gold selenide AuSe - Au0.94Ag0.06Se. Solid solutions and AgAuSe phases were added to the phase diagram of Ag-Au-Se system. Crystal-chemical interpretation of Ag-Au isomorphism in selenides was made on the basis of structural features of fischesserite, naumannite, and AuSe.

  2. A Nanostructured Bifunctional platform for Sensing of Glucose Biomarker in Artificial Saliva: Synergy in hybrid Pt/Au surfaces.

    PubMed

    Raymundo-Pereira, Paulo A; Shimizu, Flávio M; Coelho, Dyovani; Piazzeta, Maria H O; Gobbi, Angelo L; Machado, Sergio A S; Oliveira, Osvaldo N

    2016-12-15

    We report on a bimetallic, bifunctional electrode where a platinum (Pt) surface was patterned with nanostructured gold (Au) fingers with different film thicknesses, which was functionalized with glucose oxidase (GOx) to yield a highly sensitive glucose biosensor. This was achieved by using selective adsorption of a self-assembled monolayer (SAM) onto Au fingers, which allowed GOx immobilization only onto the Au-SAM surface. This modified electrode was termed bifunctional because it allowed to simultaneously immobilize the biomolecule (GOx) on gold to catalyze glucose, and detect hydrogen peroxide on Pt sites. Optimized electrocatalytic activity was reached for the architecture Pt/Au-SAM/GOx with 50nm thickness of Au, where synergy between Pt and Au allowed for detection of hydrogen peroxide (H2O2) at a low applied potential (0V vs. Ag/AgCl). Detection was performed for H2O2 in the range between 4.7 and 102.7 nmol L(-1), with detection limit of 3.4×10(-9) mol L(-1) (3.4 nmol L(-1)) and an apparent Michaelis-Menten rate constant of 3.2×10(-6)molL(-1), which is considerably smaller than similar devices with monometallic electrodes. The methodology was validated by measuring glucose in artificial saliva, including in the presence of interferents. The synergy between Pt and Au was confirmed in electrochemical impedance spectroscopy measurements with an increased electron transfer, compared to bare Pt and Au electrodes. The approach for fabricating the reproducible bimetallic Pt/Au electrodes is entirely generic and may be explored for other types of biosensors and biodevices where advantage can be taken of the combination of the two metals.

  3. Level densities and thermodynamical properties of Pt and Au isotopes

    NASA Astrophysics Data System (ADS)

    Giacoppo, F.; Bello Garrote, F. L.; Bernstein, L. A.; Bleuel, D. L.; Eriksen, T. K.; Firestone, R. B.; Görgen, A.; Guttormsen, M.; Hagen, T. W.; Kheswa, B. V.; Klintefjord, M.; Koehler, P. E.; Larsen, A. C.; Nyhus, H. T.; Renstrøm, T.; Sahin, E.; Siem, S.; Tornyi, T.

    2014-11-01

    The nuclear level densities of Pt-196194 and Au,198197 below the neutron separation energy have been measured using transfer and scattering reactions. All the level density distributions follow the constant-temperature description. Each group of isotopes is characterized by the same temperature above the energy threshold corresponding to the breaking of the first Cooper pair. A constant entropy excess Δ S =1.9 kB and 1.1 kB is observed in 195Pt and 198Au with respect to 196Pt and 197Au, respectively, giving information on the available single-particle level space for the last unpaired valence neutron. The breaking of nucleon Cooper pairs is revealed by sequential peaks in the microcanonical caloric curve.

  4. Site-specific growth of a Pt shell on Au nanoplates: tailoring their surface plasmonic behavior

    NASA Astrophysics Data System (ADS)

    Jang, Hee-Jeong; Hong, Soonchang; Ham, Songyi; Shuford, Kevin L.; Park, Sungho

    2014-06-01

    In this report, we tune the surface plasmonic behavior of Au nanoplates depending on the morphology of the Pt shell in which Pt is considered as a less optically inactive element. We describe the synthesis of flat Au nanoplates coated with Pt via rim-preferential or uniform growth methods. Depending on the site-selective growth of Pt on core Au nanoplates, the aspect ratio of the resulting Au@Pt nanoplates was tunable and their corresponding surface plasmon resonance (SPR) bands were controlled accordingly. Although Pt is regarded as an optically weak component in visible and near infrared spectral windows, a Pt coating affects the SPR behavior of core Au nanoplates due to effective surface plasmon (SP) coupling between the Au core and the deposited Pt shell. We systematically investigated the optical properties of uniformly grown (Au@Pt(uni)) and rim-preferentially grown (Au@Pt(rim)) Au@Pt nanoplates by observing their SPR band shifts compared to SPR of Au nanoplates. Due to the structural rigidity conferred by the Pt coating, the Au@Pt nanoplates can be easily transferred to the investigated solvents.In this report, we tune the surface plasmonic behavior of Au nanoplates depending on the morphology of the Pt shell in which Pt is considered as a less optically inactive element. We describe the synthesis of flat Au nanoplates coated with Pt via rim-preferential or uniform growth methods. Depending on the site-selective growth of Pt on core Au nanoplates, the aspect ratio of the resulting Au@Pt nanoplates was tunable and their corresponding surface plasmon resonance (SPR) bands were controlled accordingly. Although Pt is regarded as an optically weak component in visible and near infrared spectral windows, a Pt coating affects the SPR behavior of core Au nanoplates due to effective surface plasmon (SP) coupling between the Au core and the deposited Pt shell. We systematically investigated the optical properties of uniformly grown (Au@Pt(uni)) and rim

  5. Facile routes to NiF{sub 6}{sup 2{minus}}, AgF{sub 4}{sup {minus}}, AuF{sub 6}{sup {minus}}, and PtF{sub 6}{sup {minus}} salts using O{sub 2}{sup +} as a source of O{sub 2}F in anhydrous HF

    SciTech Connect

    Lucier, G.M.; Shen, C.; Elder, S.H.; Bartlett, N. |

    1998-07-27

    O{sub 2}{sup +} salts dissolved in liquid anhydrous hydrogen fluoride (aHF) at 20 C or below oxidize aHF solutions of PtF{sub 6}{sup 2{minus}} to PtF{sub 6}{sup {minus}}. The parent base of O{sub 2}{sup +} salts in aHF (O{sub 2}F{sub (solv)}) generated with alkali fluoride is long-lived below {minus}50 C. An aHF solution of O{sub 2}F{sub (solv)} oxidizes Au(III) to Au(V) below {minus}50 C (20{sub 2}F{sub (solv)} + AuF{sub 4}{sup {minus}}{sub (solv)} {yields} AuF{sub 6}{sup {minus}}{sub (solv)} + 2O{sub 2(g)}). In situ generation of O{sub 2}F{sub (solv)} (O{sub 2}{sup +}{sub (solv)} + F{sup {minus}}{sub (solv)} {yields} O{sub 2}F{sub (solv)}) with AgF{sub 2} or NiF{sub 2} in suspension in the aHF made basic with alkali fluoride gives AgF{sub 4}{sup {minus}} and NiF{sub 6}{sup 2{minus}} salts. Low solubility of AAsF{sub 6}(A = Cs, K) in aHF provides for the metathetical preparation of (O{sub 2}){sub 2}PdF{sub 6} solutions in aHF. Removal of aHF, even at {minus}60 C, results in some O{sub 2} and F{sub 2} loss, to a composition approaching (O{sub 2})PdF{sub 5}.

  6. Facile synthesis of PtAu alloy nanoparticles with high activity for formic acid oxidation

    SciTech Connect

    Zhang, Sheng; Shao, Yuyan; Yin, Geping; Lin, Yuehe

    2010-02-15

    We report the facile synthesis of carbon supported PtAu alloy nanoparticles with high electrocatalytic activity as the anode catalyst for direct formic acid fuel cells (DFAFCs). PtAu alloy nanopaticles are synthesized by co-reducing HAuCl4 and H2PtCl6 with NaBH4 in the presence of sodium citrate and then the nanoparticles are deposited on Vulcan XC-72R carbon support (PtAu/C). The obtained catalysts are characterized with X-ray diffraction (XRD) and transmission electron microscope (TEM), which reveal PtAu alloy formation with an average diameter of 4.6 nm. PtAu/C exhibits 8 times higher catalytic activity toward formic acid oxidation than Pt/C. The enhanced activity of PtAu/C catalyst is attributed to noncontinuous Pt sites formed in the presence of the neighbored Au sites, which promotes direct oxidation of formic acid by avoiding poison CO.

  7. Development of Pt-Au-Graphene-Carbon Nanotube Composite for Fuel Cells and Biosensors Applications

    DTIC Science & Technology

    2011-02-11

    1 Project Title:- Development of Pt-Au-Graphene- Carbon nanotube composites for fuel cells and biosensors applications Objectives:- This...project addresses the architectures needed for the processing of Pt-Au-graphene- carbon nanotube (Pt-Au/f-G/f-CNT) nanocomposites and aims at the...05-2010 4. TITLE AND SUBTITLE Development of Pt-Au-Graphene- Carbon nanotube composite for fuel cells and biosensors applications 5a. CONTRACT

  8. Thermoelectric effect in very thin film Pt/Au thermocouples

    SciTech Connect

    Salvadori, M.C.; Vaz, A.R.; Teixeira, F.S.; Cattani, M.; Brown,I.G.

    2006-01-10

    The thickness dependence of the thermoelectric power of Pt films of variable thickness on a reference Au film has been determined for the case when the Pt film thickness, t, is not large compared to the charge carrier mean free path, {ell}, that is, t/{ell}. Pt film thicknesses down to 2.2 nm were investigated. We find that {Delta}S{sub F} = S{sub B}-S{sub F} (where S{sub B} and S{sub F} are the thermopowers of the Pt bulk and film, respectively) does not vary linearly as 1/t as is the case for thin film thermocouples when the film thickness is large compared to the charge carrier mean free path.

  9. One pot aqueous synthesis of nanoporous Au85Pt15 material with surface bound Pt islands: an efficient methanol tolerant ORR catalyst

    NASA Astrophysics Data System (ADS)

    Anandha Ganesh, P.; Jeyakumar, D.

    2014-10-01

    For the first time, we are reporting the synthesis of Au100-xPtx nanoporous materials in the size range of 7-10 nm through the galvanic replacement of Ag by Pt from Au100-xAg2x spherical nano-alloys (x = 20, 15, 10 and 5) in an aqueous medium. The galvanic replacement reaction follows the `Volmer-Weber' growth mode, resulting in the formation of surface bound platinum islands on a nanoporous gold surface. The high angle annular dark field image and low angle X-ray diffraction studies confirm the presence of nanoporous Au100-xPtx NPs. The electrochemical studies using the Au85Pt15/C catalyst show excellent methanol tolerance behaviour and better performance towards oxygen reduction reaction (ORR) in terms of high mass activity, mass-specific activity and figure of merit (FOM) when compared to HiSPEC Pt/C commercial catalyst. Preliminary studies on a full cell using nanoporous Au85Pt15/C (loading 1.0 mg cm-2) as the cathode material and Pt-Ru/C (loading: 0.5 mg cm-2) as the anode material performed better (38 mW cm-2) than the HiSPEC Pt/C cathode material (16 mW cm-2).For the first time, we are reporting the synthesis of Au100-xPtx nanoporous materials in the size range of 7-10 nm through the galvanic replacement of Ag by Pt from Au100-xAg2x spherical nano-alloys (x = 20, 15, 10 and 5) in an aqueous medium. The galvanic replacement reaction follows the `Volmer-Weber' growth mode, resulting in the formation of surface bound platinum islands on a nanoporous gold surface. The high angle annular dark field image and low angle X-ray diffraction studies confirm the presence of nanoporous Au100-xPtx NPs. The electrochemical studies using the Au85Pt15/C catalyst show excellent methanol tolerance behaviour and better performance towards oxygen reduction reaction (ORR) in terms of high mass activity, mass-specific activity and figure of merit (FOM) when compared to HiSPEC Pt/C commercial catalyst. Preliminary studies on a full cell using nanoporous Au85Pt15/C (loading 1.0 mg

  10. Synthesis, characterization and SERS activity of Au-Ag nanorods.

    PubMed

    Philip, Daizy; Gopchandran, K G; Unni, C; Nissamudeen, K M

    2008-09-01

    The formation mechanism and morphology of Au-Ag bimetallic colloidal nanoparticles depend on the composition. Ag coated Au colloidal nanoparticles have been prepared by deposition of Ag through chemical reduction on performed Au colloid. The composition of the Au100-x-Agx particles was varied from x=0 to 50. The obtained colloids were characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The Au80-Ag20 colloid consists of alloy nanorods with dimension of 25nm x 100nm. The activity of these nanorods in surface enhanced Raman spectroscopy (SERS) was checked by using sodium salicylate as an adsorbate probe. Intense SERS bands are observed indicating its usefulness as a SERS substrate in near infrared (NIR) laser excitation.

  11. Impact of Ni/Ge/Au/Ti/Au and Ti/Pt/Au collector metal on GaInP/GaAs HBT characteristics

    NASA Astrophysics Data System (ADS)

    Park, Jae-Woo; Mohammadi, Saeed; Pavlidis, Dimitris

    2000-10-01

    The collector-emitter offset voltage of GaInP/GaAs HBTs grown by chemical-beam epitaxy with reduced toxicity precursors is investigated for Ni/Ge/Au/Ti/Au and Ti/Pt/Au collector contact metals. The offset voltage for HBTs with Ti/Pt/Au collector metal is increased by 0.26 V compared to Ni/Ge/Au/Ti/Au due to the 0.26 eV barrier existing between the n-GaAs subcollector and the Ti/Pt/Au contact metal. Other parameters affected by the collector contact barrier and impacting transistor performance include DC gain, microwave and power performance.

  12. Controlled synthesis of FePt-Au hybrid nanoparticles triggered by reaction atmosphere and FePt seeds.

    PubMed

    Zhu, Jinghan; Wu, Jiajia; Liu, Fei; Xing, Ruijun; Zhang, Chenzhen; Yang, Ce; Yin, Han; Hou, Yanglong

    2013-10-07

    We report an effective and facile method for synthesis of FePt-Au hybrid nanoparticles (HNPs). The typical secondary growth of Au proceeded in the presence of FePt seeds in organic solvents under a specific atmosphere. Interestingly, the type of atmosphere (Ar or Ar-H₂) and the size of selected FePt seeds were two major parameters determining the final morphology of FePt-Au HNPs. Enhancement of catalytic activity and stability of FePt-Au HNPs in methanol oxidation were achieved owing to interactions between Au and FePt. The optical properties of the resulting products can be steadily tuned which sheds light on their potential application in optical devices and bioimaging. The novel synthetic strategy offers an important tool towards multifunctional nanomaterials with designed architectures.

  13. Biosynthesis of Au, Ag and Au-Ag nanoparticles using edible mushroom extract

    NASA Astrophysics Data System (ADS)

    Philip, Daizy

    2009-07-01

    Integration of green chemistry principles to nanotechnology is one of the key issues in nanoscience research. There is growing need to develop environmentally benign metal nanoparticle synthesis process that do not use toxic chemicals in the synthesis protocols to avoid adverse effects in medical applications. Here, it is a report on extracellular synthesis method for the preparation of Au, Ag and Au-Ag nanoparticles in water, using the extract of Volvariella volvacea, a naturally occurring edible mushroom, as reducing and protecting agents. Gold nanoparticles of different sizes (20-150 nm) and shapes from triangular nanoprisms to nearly spherical and hexagonal are obtained by this novel method. The size and shape of gold nanoparticles are also found to depend on temperature of the extract. The silver nanoparticles are spherical with size ˜15 nm. There is increased productivity of nanoparticles as shown by sharp and intense surface plasmon resonance bands for the nanoparticles prepared using an excess of the extract. The Au-Ag nanoparticles prepared by co-reduction has only one plasmon band due to alloying of the constituents. All the synthesized nanoparticles are found to be photoluminescent and are highly crystalline as shown by SAED and XRD patterns with fcc phase oriented along the (1 1 1) plane. FTIR measurements were carried out to identify the possible biomolecules responsible for capping and efficient stabilization of the nanoparticles. It is found that Au nanoparticles are bound to proteins through free amino groups and silver nanoparticles through the carboxylate group of the amino acid residues. The position and intensity of the emission band is found to depend on composition of the nanoparticles indicating the possible use in therapeutic applications.

  14. Pt- and Au-induced monodirectional nanowires on Ge(110)

    NASA Astrophysics Data System (ADS)

    Watanabe, T.; Yamada, Y.; Sasaki, M.; Sakai, S.; Yamauchi, Y.

    2016-11-01

    The adsorption of Pt or Au on Ge(110) and subsequent annealing resulted in formation of well-ordered monodirectional nanowires (NWs) throughout the surface over a cm-scale. The NWs were aligned along the [ 1 1 bar 0] direction, independent of the surface reconstruction of Ge(110). Metastable-atom deexcitation spectroscopy of Pt-NWs revealed that the topmost part of the NWs comprised Ge atoms, suggesting the exchange of the Ge and metal atoms, leaving an ultrathin Ge layer on top of the NWs. The increase in the electronic density of state near the Fermi energy was observed from both the MDS and UPS spectra of the Pt-NWs, suggesting a metallicity of the NWs.

  15. Desorption of oxygen from alloyed Ag/Pt(111)

    SciTech Connect

    Jankowski, Maciej; Wormeester, Herbert Zandvliet, Harold J. W.; Poelsema, Bene

    2014-06-21

    We have investigated the interaction of oxygen with the Ag/Pt(111) surface alloy by thermal desorption spectroscopy (TDS). The surface alloy was formed during the deposition of sub-monolayer amounts of silver on Pt(111) at 800 K and subsequent cooling to 300 K. The low-temperature phase of the surface alloy is composed of nanometer-sized silver rich stripes, embedded within platinum-rich domains, which were characterized with spot profile analysis low energy electron diffraction. The TDS measurements show that oxygen adsorption is blocked on Ag sites: the saturation coverage of oxygen decreases with increasing Ag coverage. Also, the activation energy for desorption (E{sub des}) decreases with Ag coverage. The analysis of the desorption spectra from clean Pt(111) shows a linear decay of E{sub des} with oxygen coverage, which indicates repulsive interactions between the adsorbed oxygen atoms. In contrast, adsorption on alloyed Ag/Pt(111) leads to an attractive interaction between adsorbed oxygen atoms.

  16. Electrocatalytic activity of PtAu/C catalysts for glycerol oxidation.

    PubMed

    Jin, Changchun; Sun, Chao; Dong, Rulin; Chen, Zhidong

    2012-01-01

    The electrocatalytic oxidation of glycerol on PtAu/C catalysts has been investigated by cyclic voltammetry. PtAu bimetallic nanoparticles are prepared by chemical reduction. Carbon-supported PtAu catalysts are found to exhibit high electrocatalytic activity for the oxidation of glycerol in alkaline solution in terms of oxidation potential and current density as well as stability, and PtAu/C catalysts with different Pt:Au composition ratios show no much difference in catalytic activity. In acidic solution, PtAu/C catalysts exhibit similar to Pt/C catalysts in activity, but the advantage of the PtAu/C catalysts in terms of per unit mass of platinum is still obvious. The PtAu/C catalysts, in a wide Pt:Au ratio range, show a remarkable enhancement in the mass specific activity of platinum with decreasing platinum content in both alkaline and acidic solutions. This is of significance for reducing the usage of platinum and indicates that though platinum acts as main active sites, gold also plays an important role in the function of PtAu/C catalysts.

  17. Melting curve of metals Cu, Ag and Au under pressure

    NASA Astrophysics Data System (ADS)

    Tam, Pham Dinh; Hoc, Nguyen Quang; Tinh, Bui Duc; Tan, Pham Duy

    2016-01-01

    In this paper, the dependence of the melting temperature of metals Cu, Ag and Au under pressure in the interval from 0 kbar to 40 kbar is studied by the statistical moment method (SMM). This dependence has the form of near linearity and the calculated slopes of melting curve are 3.9 for Cu, 5.7 for Ag and 6 for Au. These results are in good agreement with the experimental data.

  18. Effect of ozone cleaning on Pt/Au and W/Pt/Au Schottky contacts to n-type ZnO

    NASA Astrophysics Data System (ADS)

    Ip, n.-type ZnO. K.; Gila, B. P.; Onstine, A. H.; Lambers, E. S.; Heo, Y. W.; Baik, K. H.; Norton, D. P.; Pearton, S. J.; Kim, S.; LaRoche, J. R.; Ren, F.

    2004-09-01

    The role of UV ozone cleaning on the characteristics of Pt contacts on n-type ( n˜10 17 cm -3) bulk single-crystal zinc oxide (ZnO) is reported. The contacts are Ohmic for samples that were not exposed to ozone prior to Pt deposition, but exhibit excellent rectifying behavior with ozone cleaning. The barrier height of these contacts obtained from current-voltage measurements was 0.70±0.04 eV at 25 °C with an ideality factor of 1.49 and a saturation current density of 6.17×10 -6 A cm -2. There is a significant decrease in surface carbon concentration after the ozone cleaning (29.5 at.% down to 5.8 at.%, as determined from Auger electron spectroscopy). The measured barrier height for Pt on ZnO is similar to the value reported for both Au and Ag rectifying contacts on this material. By sharp contrast, sputter-deposited W contacts are Ohmic, independent of the use of ozone cleaning and become rectifying after 700 °C annealing to repair sputter-induced damage. The barrier height is ˜0.45-0.49 eV, with the ozone cleaning producing values at the high end of this range.

  19. An Au/AgBr-Ag heterostructure plasmonic photocatalyst with enhanced catalytic activity under visible light.

    PubMed

    Purbia, Rahul; Paria, Santanu

    2017-01-17

    This study reports an easy synthesis protocol of a novel bimetallic silver halide (Au/AgBr-Ag) plasmonic heterostructure as a visible light induced photocatalyst. In this process, first CTAB capped Au NPs were coated with AgBr, and then Ag nanoparticles were formed on the surface of AgBr by photoreduction, while exposing to daylight at room temperature. The presence of Au and Ag improves the visible absorption ability of NPs and avoids charge recombination of the semiconductor AgBr during photoexcitation, which in turn enhances 16 and 8.9 fold the photocatalytic efficiency of Rhodamine B dye degradation under visible light irradiation compared to that of pure AgBr and AgBr/Ag, respectively. The recycling tests of the photocatalyst show only ∼8.7% decrease in efficiency after the 5(th) cycle of reuse without changing the morphology. During the photocatalytic process, active superoxide radicals (O2˙(-)) play a major role, proved through scavenger trapping and photoluminescence experiments. The presence of two plasmonic metals (Au and Ag) in the heterostructure helps to improve visible light absorption as well as avoid charge recombination of the semiconductor AgBr to act as a better photocatalyst. Since this heteronanostructure can be easily synthesized by a one-step method, this study could provide a new approach for the development of efficient bimetallic/semiconductor halide plasmonic photocatalysts with enhanced visible absorption and better charge separation.

  20. Rationalization of Au concentration and distribution in AuNi@Pt core-shell nanoparticles for oxygen reduction reaction

    DOE PAGES

    An, Wei; Liu, Ping

    2015-09-18

    Improving the activity and stability of Pt-based core–shell nanocatalysts for proton exchange membrane fuel cells while lowering Pt loading has been one of the big challenges in electrocatalysis. Here, using density functional theory, we report the effect of adding Au as the third element to enhance the durability and activity of Ni@Pt core–shell nanoparticles (NPs) during the oxygen reduction reaction (ORR). Our results show that the durability and activity of a Ni@Pt NP can be finely tuned by controlling Au concentration and distribution. For a NiAu@Pt NP, the durability can be greatly promoted by thermodynamically favorable segregation of Au tomore » replace the Pt atoms at vertex, edge, and (100) facets on the shell, while still keeping the ORR activity on the active Pt(111) shell as high as that of Ni@Pt nanoparticles. Such behavior strongly depends on a direct interaction with the Ni interlayer. The results not only highlight the importance of interplay between surface strain on the shell and the interlayer–shell interaction in determining the durability and activity but also provide guidance on how to maximize the usage of Au to optimize the performance of core–shell (Pt) nanoparticles. As a result, such understanding has allowed us to discover a novel NiAu@Pt nanocatalyst for the ORR.« less

  1. Rationalization of Au concentration and distribution in AuNi@Pt core-shell nanoparticles for oxygen reduction reaction

    SciTech Connect

    An, Wei; Liu, Ping

    2015-09-18

    Improving the activity and stability of Pt-based core–shell nanocatalysts for proton exchange membrane fuel cells while lowering Pt loading has been one of the big challenges in electrocatalysis. Here, using density functional theory, we report the effect of adding Au as the third element to enhance the durability and activity of Ni@Pt core–shell nanoparticles (NPs) during the oxygen reduction reaction (ORR). Our results show that the durability and activity of a Ni@Pt NP can be finely tuned by controlling Au concentration and distribution. For a NiAu@Pt NP, the durability can be greatly promoted by thermodynamically favorable segregation of Au to replace the Pt atoms at vertex, edge, and (100) facets on the shell, while still keeping the ORR activity on the active Pt(111) shell as high as that of Ni@Pt nanoparticles. Such behavior strongly depends on a direct interaction with the Ni interlayer. The results not only highlight the importance of interplay between surface strain on the shell and the interlayer–shell interaction in determining the durability and activity but also provide guidance on how to maximize the usage of Au to optimize the performance of core–shell (Pt) nanoparticles. As a result, such understanding has allowed us to discover a novel NiAu@Pt nanocatalyst for the ORR.

  2. Au-Ag@Au Hollow Nanostructure with Enhanced Chemical Stability and Improved Photothermal Transduction Efficiency for Cancer Treatment.

    PubMed

    Jiang, Tongtong; Song, Jiangluqi; Zhang, Wenting; Wang, Hao; Li, Xiaodong; Xia, Ruixiang; Zhu, Lixin; Xu, Xiaoliang

    2015-10-07

    Despite the fact that Au-Ag hollow nanoparticles (HNPs) have gained much attention as ablation agents for photothermal therapy, the instability of the Ag element limits their applications. Herein, excess Au atoms were deposited on the surface of a Au-Ag HNP by improving the reduction power of l-ascorbic acid (AA) and thereby preventing the reaction between HAuCl4 and the Ag element in the Au-Ag alloy nanostructure. Significantly, the obtained Au-Ag@Au HNPs show excellent chemical stability in an oxidative environment, together with remarkable increase in extinction peak intensity and obvious narrowing in peak width. Moreover, finite-difference time-domain (FDTD) was used to simulate the optical properties and electric field distribution of HNPs. The calculated results show that the proportion of absorption cross section in total extinction cross section increases with the improvement of Au content in HNP. As predicted by the theoretical calculation results, Au-Ag@Au nanocages (NCs) exhibit a photothermal transduction efficiency (η) as high as 36.5% at 808 nm, which is higher than that of Au-Ag NCs (31.2%). Irradiated by 808 nm laser at power densities of 1 W/cm(2), MCF-7 breast cancer cells incubated with PEGylated Au-Ag@Au NCs were seriously destroyed. Combined together, Au-Ag@Au HNPs with enhanced chemical stability and improved photothermal transduction efficiency show superior competitiveness as photothermal agents.

  3. Green synthesis and characterization of Au@Pt core-shell bimetallic nanoparticles using gallic acid

    NASA Astrophysics Data System (ADS)

    Zhang, Guojun; Zheng, Hongmei; Shen, Ming; Wang, Lei; Wang, Xiaosan

    2015-06-01

    In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core-shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl4- and PtCl62-, where the AuCl4- ions are preferentially reduced to Au cores and the PtCl62- ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl4/H2PtCl6, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core-shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH4 reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core-shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.

  4. Ru, Re, Os, Pt and Au in iron meteorites

    NASA Technical Reports Server (NTRS)

    Pernicka, Ernst; Wasson, John T.

    1987-01-01

    Neutron activation analysis is used to ascertain the proportions of Ru, Re, Os, and Pt refractory siderophiles, and moderately volatile Au, in 41 iron meteorites. The Ni-element trends defined for groups IID and IIIF support a magmatic origin; in addition, the results obtained for groups IAB and IIICD contrast with trends observed in magmatic groups, where the Ru and Pt slopes are substantially less steep. In group IIIAB, at Ni concentrations above 90 mg/g, the steep decrease of Re, Os, and Ir with Ni levels off, and the interelement ratios exhibit considerable scatter. These observations may be explained in terms of the contamination of the residual molten core with small amounts of late primitive melts draining from the mantle.

  5. Characterization of Pt-Au and Ni-Au Clusters on TiO2(110)

    SciTech Connect

    S Tenney; W He; J Ratliff; D Mullins; D Chen

    2011-12-31

    The surface composition and properties of Pt-Au and Ni-Au clusters on TiO{sub 2}(110) have been studied by scanning tunneling microscopy (STM), low energy ion scattering (LEIS) and soft X-ray photoelectron spectroscopy (sXPS). STM studies show that bimetallic clusters are formed during sequential deposition of the two metals, regardless of the order of deposition. At the 2 ML of Au/2 ML of Pt or Ni coverages studied here, the second metal contributes to the growth of existing clusters rather than forming new pure metal clusters. LEIS experiments demonstrate that the surfaces of the bimetallic clusters are almost 100% Au when 2 ML of Au is deposited on top of 2 ML of Pt or Ni. However, a much larger fraction of Pt or Ni (50 and 20%, respectively) remains at the surface when 2 ML of Pt or Ni is deposited on 2 ML of Au, most likely due to limited diffusion of atoms within the clusters at room temperature. According to sXPS investigations, the binding energies of the metals in the bimetallic clusters are shifted from those observed for pure metal clusters; the Pt(4f{sub 7/2}) and Ni(3p{sub 3/2}) peaks are shifted to lower binding energies while the position of the Au(4f{sub 7/2}) peak is dominated by surface core level shifts. Pure Pt clusters as well as 0.4 ML of Au on 2 ML of Pt clusters reduce the titania support upon encapsulation after annealing to 800 K, whereas 2 ML of Au on 2 ML of Pt clusters do not reduce titania, presumably because there is no Pt at the surface of the clusters. Pure Ni clusters are also known to become encapsulated upon heating, but the reduction of titania is much less extensive compared to that of pure Pt clusters.

  6. Au@Pt nanostructures: a novel photothermal conversion agent for cancer therapy.

    PubMed

    Tang, Jinglong; Jiang, Xiumei; Wang, Liming; Zhang, Hui; Hu, Zhijian; Liu, Ying; Wu, Xiaochun; Chen, Chunying

    2014-04-07

    Due to aspect ratio dependent localized surface plasmon resonance (SPR), gold nanorods (Au NRs) can be tuned to have a strong absorption in the near infrared region (NIR) and convert light to heat energy, which shows promises in cancer photothermal therapy. In this study, we introduced another more efficient NIR photothermal agent, Au nanorods coated with a shell of Pt nanodots (Au@Pt nanostructures). After surface modification with Pt dots, the Au@Pt nanostructure became a more efficient photothermal therapy agent as verified both in vitro and in vivo. To clarify the mechanism, we assessed the interaction between the MDA-MB-231 cells with Au@Pt or Au NRs. Results showed that the slightly higher uptake and the reduced sensitivity of the longitudinal SPR band on the intracellular aggregate state may contribute to the better photothermal efficiency for Au@Pt NRs. The theoretical studies further confirmed that the Au@Pt nanostructure itself exhibited better photothermal efficiency compared to Au NRs. These advantages make the Au@Pt nanostructure a more attractive and effective agent for cancer photothermal therapy than general Au NRs.

  7. A Selective Blocking Method To Control the Overgrowth of Pt on Au Nanorods

    PubMed Central

    2013-01-01

    A method for the preparation of smooth deposits of Pt on Au nanorods is described, involving sequential deposition steps with selective blocking of surface sites that reduces Pt-on-Pt deposition. The Au–Pt nanorods prepared by this method have higher long-term stability than those prepared by standard Pt deposition. Electrochemical data show that the resulting structure has more extended regions of Pt surface and enhanced activity toward the carbon monoxide oxidation and oxygen reduction reactions. PMID:23594230

  8. Pt skin on AuCu intermetallic substrate: a strategy to maximize Pt utilization for fuel cells.

    PubMed

    Wang, Gongwei; Huang, Bing; Xiao, Li; Ren, Zhandong; Chen, Hao; Wang, Deli; Abruña, Héctor D; Lu, Juntao; Zhuang, Lin

    2014-07-09

    The dependence on Pt catalysts has been a major issue of proton-exchange membrane (PEM) fuel cells. Strategies to maximize the Pt utilization in catalysts include two main approaches: to put Pt atoms only at the catalyst surface and to further enhance the surface-specific catalytic activity (SA) of Pt. Thus far there has been no practical design that combines these two features into one single catalyst. Here we report a combined computational and experimental study on the design and implementation of Pt-skin catalysts with significantly improved SA toward the oxygen reduction reaction (ORR). Through screening, using density functional theory (DFT) calculations, a Pt-skin structure on AuCu(111) substrate, consisting of 1.5 monolayers of Pt, is found to have an appropriately weakened oxygen affinity, in comparison to that on Pt(111), which would be ideal for ORR catalysis. Such a structure is then realized by substituting the Cu atoms in three surface layers of AuCu intermetallic nanoparticles (AuCu iNPs) with Pt. The resulting Pt-skinned catalyst (denoted as Pt(S)AuCu iNPs) has been characterized in depth using synchrotron XRD, XPS, HRTEM, and HAADF-STEM/EDX, such that the Pt-skin structure is unambiguously identified. The thickness of the Pt skin was determined to be less than two atomic layers. Finally the catalytic activity of Pt(S)AuCu iNPs toward the ORR was measured via rotating disk electrode (RDE) voltammetry through which it was established that the SA was more than 2 times that of a commercial Pt/C catalyst. Taking into account the ultralow Pt loading in Pt(S)AuCu iNPs, the mass-specific catalytic activity (MA) was determined to be 0.56 A/mg(Pt)@0.9 V, a value that is well beyond the DOE 2017 target for ORR catalysts (0.44 A/mg(Pt)@0.9 V). These findings provide a strategic design and a realizable approach to high-performance and Pt-efficient catalysts for fuel cells.

  9. Study on antibacterial activity of chemically synthesized PANI-Ag-Au nanocomposite

    NASA Astrophysics Data System (ADS)

    Boomi, Pandi; Prabu, Halliah Gurumallesh; Manisankar, Paramasivam; Ravikumar, Sundaram

    2014-05-01

    Pristine polyaniline (PANI), PANI-Ag, PANI-Au and PANI-Ag-Au nanocomposites have been successfully synthesized by chemical oxidative polymerization method using aniline as monomer, ammonium persulphate as oxidant and metal (Ag, Au and Ag-Au) colloids. UV-Vis analysis exhibited surface Plasmon resonances of Ag, Au, Ag-Au nanoparticles. FT-IR spectra revealed the shift in peak position of N-H stretching. X-ray diffraction (XRD) results confirm the presence of Ag, Au and Au-Ag nanoparticles. HR-TEM images show nanosizes of Ag, Au, Ag-Au and the incorporation of such nanoparticles into the PANI matrix. Pristine PANI, PANI-Ag, PANI-Au and PANI-Ag-Au nanocomposites were tested for antibacterial activity by agar well diffusion method. PANI-Ag-Au nanocomposite exhibited higher antibacterial activity against both gram-positive [Streptococcus sp. (MTCC 890), Staphylococcus sp. (MTCC 96)] and gram-negative bacteria [Escherichia coli (MTCC 1671) and Klebsiella sp. (MTCC 7407)] when compared with PANI-Ag nanocomposite, PANI-Au nanocomposite and pristine PANI. The novelty of this study is the polymer-bimetal synthesis and its antibacterial potential.

  10. Pion Interferometry in AU+AU Collisions at the AGS

    SciTech Connect

    Lee, J. H.

    1999-01-09

    Two-pion Bose-Einstein correlations have been studied using the BNL-E866 Forward Spectrometer in 11.6 A {center_dot} GeV/c Au + Au collisions. The data were analyzed using three-dimensional correlation parameterizations to study transverse momentum-dependent source parameters. The freeze-out time and the duration of emission were derived from the source radii parameters.

  11. Facile synthesis of Ag@Au core-sheath nanowires with greatly improved stability against oxidation.

    PubMed

    Yang, Miaoxin; Hood, Zachary D; Yang, Xuan; Chi, Miaofang; Xia, Younan

    2017-02-07

    We report a facile synthesis of Ag@Au core-sheath nanowires through the conformal deposition of Au atoms onto the surface of pre-synthesized Ag nanowires. The resulting Ag@Au nanowires showed morphology and optical properties almost identical to the pristine Ag nanowires, but with greatly improved stability under different corrosive environments.

  12. Synthesis of ultrathin face-centered-cubic au@pt and au@pd core-shell nanoplates from hexagonal-close-packed au square sheets.

    PubMed

    Fan, Zhanxi; Zhu, Yihan; Huang, Xiao; Han, Yu; Wang, Qingxiao; Liu, Qing; Huang, Ying; Gan, Chee Lip; Zhang, Hua

    2015-05-04

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f -oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures.

  13. Durable electrocatalytic-activity of Pt-Au/C cathode in PEMFCs.

    PubMed

    Selvaganesh, S Vinod; Selvarani, G; Sridhar, P; Pitchumani, S; Shukla, A K

    2011-07-21

    Longevity remains as one of the central issues in the successful commercialization of polymer electrolyte membrane fuel cells (PEMFCs) and primarily hinges on the durability of the cathode. Incorporation of gold (Au) to platinum (Pt) is known to ameliorate both the electrocatalytic activity and stability of cathode in relation to pristine Pt-cathodes that are currently being used in PEMFCs. In this study, an accelerated stress test (AST) is conducted to simulate prolonged fuel-cell operating conditions by potential cycling the carbon-supported Pt-Au (Pt-Au/C) cathode. The loss in performance of PEMFC with Pt-Au/C cathode is found to be ∼10% after 7000 accelerated potential-cycles as against ∼60% for Pt/C cathode under similar conditions. These data are in conformity with the electrochemical surface-area values. PEMFC with Pt-Au/C cathode can withstand >10,000 potential cycles with very little effect on its performance. X-ray diffraction and transmission electron microscopy studies on the catalyst before and after AST suggest that incorporating Au with Pt helps mitigate aggregation of Pt particles during prolonged fuel-cell operations while X-ray photoelectron spectroscopy reflects that the metallic nature of Pt is retained in the Pt-Au catalyst during AST in comparison to Pt/C that shows a major portion of Pt to be present as oxidic platinum. Field-emission scanning electron microscopy conducted on the membrane electrode assembly before and after AST suggests that incorporating Au with Pt helps mitigating deformations in the catalyst layer.

  14. Thermodynamic Properties of Liquid Ag-Au-Sn Alloys

    NASA Astrophysics Data System (ADS)

    Hindler, M.; Knott, S.; Mikula, A.

    2010-10-01

    The thermodynamic properties of liquid Ag-Au-Sn alloys were studied with an electromotive force (EMF) method using the eutectic mixture of KCl/LiCl as a liquid electrolyte. Activities of Sn in the liquid alloys were measured at three cross-sections with constant molar ratios of Ag:Au = 2:1, 1:1, and 1:2 with tin in the concentration range between 20 at.% and 90 at.% from the liquidus of the samples up to 1030 K. The integral Gibbs energies at 973 K and the integral enthalpies were calculated by Gibbs-Duhem integration.

  15. Dielectric function dependence on temperature for Au and Ag

    NASA Astrophysics Data System (ADS)

    Chen, Yu-Jen; Lee, Meng-Chang; Wang, Chih-Ming

    2014-08-01

    The dielectric functions of Au and Ag are measured using a spectral ellipsometer. The temperature dependence parameters ωp, τ, and ɛ∞, in the Drude-Sommerfeld model have been studied. Furthermore, we provide an empirical function to describe the temperature dependence of the dielectric function for Au and Ag. The empirical function shows a good agreement with previous results. Through the empirical function, one can obtain the dielectric constant at arbitrary temperature and wavelength. This database is useful for the applications that use surface plasmon (SP) resonance at high temperatures, such as the plasmonic thermal emitter, SP-assisted thermal cancer treatment and so on.

  16. Restructuring hollow Au-Ag nanostructures for improved SERS activity

    NASA Astrophysics Data System (ADS)

    Jiji, S. G.; Gopchandran, K. G.

    2016-10-01

    Hollow Au-Ag nanostructures with improved SERS performance were prepared by using a modified galvanic replacement reaction. The plasmon characteristics of the hollow structures are found to be highly sensitive to the volume of cathode, whether or not a co-reductant was used in the synthesis. It is found that the presence of a co-reductant viz., ascorbic acid (AA) during the reaction make the hollow structures capable to maintain its physical structure even after addition of excess cathode and also it transformes sacrificial templates into highly efficient hollow Au-Ag SERS substrates. In the galvanic replacement reaction conducted in presence of AA, where on one side the removal of Ag atoms make cavities to occur and on the other side a coating on the surface with Au and Ag atoms due to co-reduction take place simultaneously. Morphological observations indicated that it is possible to control the competition between these two mechanisms and to make Au-Ag hollow structures in tune with applications by optimizing the volume of cathode or AA. The SERS activity of these substrates were tested with crystal violet molecule as probe, using two different laser lines, 514 and 784.8 nm. In this report, the enhancement observed for hollow structures fabricated under optimum conditions are in the order of 106. SERS measurements have shown that for a specific volume of cathode, substrates fabricated in presence of AA are superior to the other type and also the increase in enhancement factor is ˜10 fold.

  17. Au-supported Pt-Au mixed atomic monolayer electrocatalyst with ultrahigh specific activity for oxidation of formic acid in acidic solution.

    PubMed

    Huang, Zhao; Liu, Yan; Xie, Fangyun; Fu, Yingchun; He, Yong; Ma, Ming; Xie, Qingji; Yao, Shouzhuo

    2012-12-25

    Au-supported Pt-Au mixed atomic monolayer electrocatalyst was prepared by underpotential deposition of Cu on Au and then redox replacement with noble metal atoms, which shows an ultrahigh Pt-mass (or Pt-area) normalized specific electrocatalytic activity of 102 mA μg(Pt)(-1) (124 mA cm(Pt)(-2)) for oxidation of formic acid in acidic aqueous solution.

  18. Interfacial reactions in the Sn-Ag/Au couples

    NASA Astrophysics Data System (ADS)

    Chen, Sinn-Wen; Yen, Yee-Wen

    2001-09-01

    Ag-Sn alloys are one of the most promising lead-free solders. Their reactions with Au substrates have been examined by using the reaction couple technique. Sn-3.5wt.%Ag/Au and Sn-25wt.%Ag/Au couples have been prepared and reacted at 120, 150, 180 and 200 C for various lengths of time. Three phases, δ-AuSn, ɛ2-AuSn2, and η-AuSn4, are found in all the couples. The thickness of the reaction layers inccreases with higher temperatures and longer reaction time, and their growth rates are described by using the parabolic law. Arrhenius equation is used to describe the temperature dependence of the growth rates. The activation energy of the growth of the intermetallic layers in both kinds of the reaction couples is similar and is determined to be 76.74 KJ/mole. Based on the reaction path knowledge and interfacial morphology, it is concluded that Sn is the fastest diffusion species in the couples.

  19. Enhanced reactivity for hydrogen reactions at Pt nanoislands on Au(111).

    PubMed

    Wolfschmidt, Holger; Weingarth, Daniel; Stimming, Ulrich

    2010-05-17

    We report high exchange current densities exceeding 1 A cm(-2) at Pt nanostructures on Au(111) for hydrogen-related reactions. Such activity is found at Pt nanoparticles with a coverage of less than 10 % of a monolayer on Au(111) and on single Pt particles deposited on Au(111). Potential pulse technique as well as micropolarization curves with overpotentials of +/-10 mV were used in the case of extended nanostructured surfaces to determine the activity. Single Pt particles were investigated in an in situ electrochemical scanning tunneling microscope setup using the STM tip as local sensor. The reactivity obtained on Pt nanostructured Au(111) towards hydrogen reactions were subsidized by single particle reactivity measurements. The specific activity of platinum is enhanced by more than a factor of 1000 as compared to a Pt(111) single crystal. Aspects that may explain this enhancement such as an involvement of the substrate, highly reactive defect sites and enhanced mass transport are discussed.

  20. Nanoporous Au structures by dealloying Au/Ag thermal- or laser-dewetted bilayers on surfaces

    NASA Astrophysics Data System (ADS)

    Ruffino, F.; Torrisi, V.; Grillo, R.; Cacciato, G.; Zimbone, M.; Piccitto, G.; Grimaldi, M. G.

    2017-03-01

    Nanoporous Au attracts great technological interest and it is a promising candidate for optical and electrochemical sensors. In addition to nanoporous Au leafs and films, recently, interest was focused on nanoporous Au micro- and nano-structures on surfaces. In this work we report on the study of the characteristics of nanoporous Au structures produced on surfaces. We developed the following procedures to fabricate the nanoporous Au structures: we deposited thin Au/Ag bilayers on SiO2 or FTO (fluorine-doped tin oxide) substrates with thickness xAu and xAg of the Au and Ag layers; we induced the alloying and dewetting processes of the bilayers by furnace annealing processes of the bilayers deposited on SiO2 and by laser irradiations of the bilayers deposited on FTO; the alloying and dewetting processes result in the formation of AuxAgy alloy sub-micron particles being x and y tunable by xAu and xAg. These particles are dealloyed in HNO3 solution to remove the Ag atoms. We obtain, so, nanoporous sub-micron Au particles on the substrates. Analyzing the characteristics of these particles we find that: a) the size and shape of the particles depend on the nature of the dewetting process (solid-state dewetting on SiO2, molten-state dewetting on FTO); b) the porosity fraction of the particles depends on how the alloying process is reached: about 32% of porosity for the particles fabricated by the furnace annealing at 900 °C, about 45% of porosity for the particles fabricated by the laser irradiation at 0.5 J/cm2, in both cases independently on the Ag concentration in the alloy; c) After the dealloying process the mean volume of the Au particles shrinks of about 39%; d) After an annealing at 400 °C the nanoporous Au particles reprise their initial volume while the porosity fraction is reduced. Arguments to justify these behaviors are presented.

  1. Growth of Au@Pt coreshell nanoparticles: Probed by in-situ XANES and UV-visible spectroscopy

    NASA Astrophysics Data System (ADS)

    Nayak, C.; Bhattacharyya, K.; Tripathi, A. K.; Jha, S. N.; Bhattacharyya, D.; Sahoo, N. K.

    2016-05-01

    Au@Pt core shell nanoparticles have been synthesized by reducing Au and Pt chloride precursors with Block Co-polymer and Ascorbic acid. The growth and nucleation of Au@Pt nanoparticles have been investigated by in-situ time resolved XANES measurement which gives the evolution of the reduction process of the precursors. Linear combination fitting of the XANES spectra has been carried out to find the fraction of Au and Pt cations reduced at a particular reaction time. UV-Visible spectroscopy is used as a complementary technique which gives the changes in the Au SPR peak as Au@Pt core shell nanoparticles are formed.

  2. Au-Ag hollow nanostructures with tunable SERS properties

    NASA Astrophysics Data System (ADS)

    Jiji, S. G.; Gopchandran, K. G.

    2017-01-01

    Fabrication of hollow Au-Ag nanoparticles is done by the sequential action of galvanic replacement and Kirkendall effect. Polyol synthesized silver nanoparticles were used as templates and the size of cavities is controlled by the systematic addition of the HAuCl4. Au-Ag nanoparticles carved in different depths were tested for application as substrates for surface enhanced Raman scattering. Two medically important Raman active analytes-Nile blue chloride and Crystal violet were used in the surface enhanced Raman scattering (SERS) performance analysis. A systematic study has been made on the Raman enhancement of hollow nanoparticles fabricated with different cavity dimensions and compared with that of the silver templates used. The enhancement observed for these hollow substrates with cavities is of interest since Au protected hollow nanostructures are vital and an active area of interest in drug delivery systems.

  3. Dependence of SERS enhancement on the chemical composition and structure of Ag/Au hybrid nanoparticles

    NASA Astrophysics Data System (ADS)

    Chaffin, Elise; O'Connor, Ryan T.; Barr, James; Huang, Xiaohua; Wang, Yongmei

    2016-08-01

    Noble metal nanoparticles (NPs) such as silver (Ag) and gold (Au) have unique plasmonic properties that give rise to surface enhanced Raman scattering (SERS). Generally, Ag NPs have much stronger plasmonic properties and, hence, provide stronger SERS signals than Au NPs. However, Ag NPs lack the chemical stability and biocompatibility of comparable Au NPs and typically exhibit the most intense plasmonic resonance at wavelengths much shorter than the optimal spectral region for many biomedical applications. To overcome these issues, various experimental efforts have been devoted to the synthesis of Ag/Au hybrid NPs for the purpose of SERS detections. However, a complete understanding on how the SERS enhancement depends on the chemical composition and structure of these nanoparticles has not been achieved. In this study, Mie theory and the discrete dipole approximation have been used to calculate the plasmonic spectra and near-field electromagnetic enhancements of Ag/Au hybrid NPs. In particular, we discuss how the electromagnetic enhancement depends on the mole fraction of Au in Ag/Au alloy NPs and how one may use extinction spectra to distinguish between Ag/Au alloyed NPs and Ag-Au core-shell NPs. We also show that for incident laser wavelengths between ˜410 nm and 520 nm, Ag/Au alloyed NPs provide better electromagnetic enhancement than pure Ag, pure Au, or Ag-Au core-shell structured NPs. Finally, we show that silica-core Ag/Au alloy shelled NPs provide even better performance than pure Ag/Au alloy or pure solid Ag and pure solid Au NPs. The theoretical results presented will be beneficial to the experimental efforts in optimizing the design of Ag/Au hybrid NPs for SERS-based detection methods.

  4. Overpotential deposition of Ag monolayer and bilayer on Au(1 1 1) mediated by Pb adlayer underpotential deposition/stripping cycles

    NASA Astrophysics Data System (ADS)

    Wang, J. X.; Ocko, B. M.; Adzic, R. R.

    2003-08-01

    Ultra-thin Ag films on the Au(1 1 1) surface were prepared via overpotential deposition (OPD) in the presence of Pb 2+ ions. By carrying out repetitive Pb adlayer underpotential deposition (UPD) and stripping cycles during Ag bulk deposition, the two-dimensional growth of Ag films was significantly enhanced in high OPD. The Ag monolayer sample was made by comparing the voltammetry curves, in which the signatures for Pb adlayer UPD on Au(1 1 1) changed to that on Ag(1 1 1). As demonstrated by the X-ray specular reflectivity measurements, nearly complete monolayer and bilayer films can be made with optimized deposition procedures. On subatomic scale, however, we found that these films have significant higher root-mean-square displacement amplitudes than those underpotentially deposited Ag monolayer and bilayer on either Au(1 1 1) or Pt(1 1 1).

  5. Evaluation of bimetallic catalyst PtAg/C as a glucose-tolerant oxygen reduction cathode

    NASA Astrophysics Data System (ADS)

    Guerra-Balcázar, M.; Cuevas-Muñiz, F. M.; Álvarez-Contreras, L.; Arriaga, L. G.; Ledesma-García, J.

    2012-01-01

    PtAg/C nanoparticles were synthesized by chemical reduction and evaluated for the oxygen reduction reaction (ORR) in the absence and presence of glucose. PtAg/C catalyst formed onion-like layered structures, which are uniformly distributed on the support. PtAg/C showed activity comparable to that of Pt/C ETEK for ORR. Further, the catalyst exhibited high selectivity for ORR in the presence of glucose. PtAg/C was evaluated as cathode in a microfluidic fuel cell operated with high concentration of glucose (100 mM) as fuel. The results demonstrated that the use of PtAg/C as cathode electrode achieved higher selectivity and better performance compared with Pt/C catalyst.

  6. Signal Amplification Strategy of Triple-Layered Core-Shell Au@Pd@Pt Nanoparticles for Ultrasensitive Immunoassay Detection of Squamous Cell Carcinoma Antigen.

    PubMed

    Zhang, Xiaoyue; Du, Bin; Wu, Dan; Ma, Hongmin; Zhang, Yong; Li, He; Wei, Qin

    2015-02-01

    A novel and effective nonenzymatic immunosensor for the sensitive detection of squamous cell carcinoma antigen (SCC- Ag) was described based on triple-layered core-shell Au@Pd@Pt nanoparticles (Au@Pd@Pt NPs). To prepare the immunosensor, primary anti-SCC antibodies (Ab1) were immobilized onto nanoporous gold films (NPGF) of a modified glassy carbon electrode. Au@Pd@Pt NPs that possess strong catalytic activity for the reduction of H2O2 were used as catalytic labels of secondary anti-SCC antibodies (Ab2). Because of the catalytic activities of Au@Pd@Pt NPs and the large surface area of the NPGF, high sensitivity was achieved for the detection of SCC-Ag. The prepared immunosensor showed remarkable results, such as low detection limits (0.6 pg/mL), a wide linear range (0.001-10.0 ng/mL) and high stability and selectivity in the detection of SCC-Ag. Furthermore, the prepared immunosensor exhibited promising properties, which may be useful for real serum sample tests.

  7. Au@AuPt nanoparticles embedded in B-doped graphene: A superior electrocatalyst for determination of rutin

    NASA Astrophysics Data System (ADS)

    Chen, Xianlan; Yang, Guangming; Feng, Shaoping; Shi, Ling; Huang, Zhaolong; Pan, Haibo; Liu, Wei

    2017-04-01

    A hydrothermal approach was used to prepare B-doped graphene with B2O3 as reductant and boron source. Results reveal that the boron atoms have been successfully embedded into graphene with a high content of a total B species (2.85 at.%). Then, B-doped graphene was exfoliated further into monolayer nanosheet by impregnating Au@AuPt core-shell nanoparticles (Au@AuPt NPs) because boron atom creates a net positive charge, which facilitates Au@AuPt NPs adsorption to form Au@AuPt NPs/B-doped graphene hybrid nanocatalysts. After that, the Au@AuPt NPs/B-doped hybrid suspension was dropped on glassy carbon electrode for sensing rutin. In this way, the dispersed carboxyl units of B-doped graphene can form hydrogen bonding with the phenolic hydroxyl groups of rutin, making rutin enrich easily on modified electrode surface to enhance the electrochemical response. At the same time, its electrochemical mechanism on the modified electrode was elucidated using cyclic voltammetry. It was found that its electrochemical behavior on modified electrode surface was a surface-controlled quasi-reversible process, and the charge transfer coefficient (α) and electron transfer number (n) were 0.296 and 2, respectively. This electrochemical sensor for rutin provided a wide linear response range of 2.00 × 10-9-4.00 × 10-6 M with the detection limit (S/N = 3) of 2.84 × 10-10 M. The proposed method was applied successfully to selective determination of rutin in Tablets with acceptable recovery range (97.23-101.65%).

  8. Structure-induced enhancement in electrooxidation of trimetallic FePtAu nanoparticles.

    PubMed

    Zhang, Sen; Guo, Shaojun; Zhu, Huiyuan; Su, Dong; Sun, Shouheng

    2012-03-21

    Using FePtAu nanoparticles (NPs) as an example, this Communication demonstrates a new structure-control strategy to tune and optimize NP catalysis. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face-centered cubic (fcc) structure to chemically ordered face-centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu NPs have mass activity as high as 2809.9 mA/mg Pt and retain 92.5% of this activity after a 13 h stability test. They become the most efficient NP catalyst ever reported for FAOR. This structure-control strategy can be extended to other multimetallic NP systems, providing a general approach to advanced NP catalysts with desired activity and durability control for practical applications.

  9. On the structure of the thiolated Au6Ag7 cluster.

    PubMed

    Tlahuice-Flores, Alfredo

    2014-09-14

    The structure of the recently synthesized mercaptosuccinic acid-protected Au6Ag7(SR)10 cluster has been elucidated by a DFT approach, following an isoelectronic substitution of seven Au atoms by Ag atoms on the [Au13(SR)10](+) cluster. After a systematic search for the lowest-energy isomers, it is demonstrated that its structure comprises one octahedral-like Ag6 core covered by two monoatomic dimer motifs and one Au2Ag1(SR)4 staple-like motif. This result confirms that Ag atoms prefer the inner (core) positions while Au atoms are located on surface staple-like motifs.

  10. Time Dependent Universal Conductance Fluctuations In AuPd, Ag, And Au Wires

    NASA Astrophysics Data System (ADS)

    Trionfi, A.; Lee, S.; Natelson, D.

    2006-09-01

    Quantum transport phenomena allow experimental determinations of the phase coherence information in metals. We report quantitative comparisons of inferred coherence lengths from independent measurements of the weak localization magnetoresistance and time-dependent universal conductance fluctuations' magnetic field dependence. Strong agreement is observed in both quasi-2D and quasi-1D AuPd samples. However, quantitative agreement is not seen in quasi-1D Ag wires below 10 K and quasi-1D Au wires below 14 K. A possible explanation for this disagreement will be discussed. Attempts to produce changes in the coherence length in Au by annealing have also been made and results will be reported.

  11. Tuning the Composition of AuPt Bimetallic Nanoparticles for Antibacterial Application**

    PubMed Central

    Zhao, Yuyun; Ye, Chunjie; Liu, Wenwen; Chen, Rong; Jiang, Xingyu

    2014-01-01

    We show that bimetallic nanoparticles (NPs) of AuPt without any surface modification are potent antibiotic reagents, while pure Au NPs or pure Pt NPs display no antibiotic activities. The most potent antibacterial AuPt NPs happen to be the most effective catalysts for chemical transformations. The mechanism of antibiotic action includes the dissipation of membrane potential and the elevation of adenosine triphosphate (ATP) levels. These bimetallic NPs are unique in that they do not produce reactive oxygen species as most antibiotics do. Being non-toxic to human cells, these bimetallic noble NPs might open an entry to a new class of antibiotics. PMID:24828967

  12. Communication: Kinetics of chemical ordering in Ag-Au and Ag-Ni nanoalloys

    NASA Astrophysics Data System (ADS)

    Calvo, F.; Fortunelli, A.; Negreiros, F.; Wales, D. J.

    2013-09-01

    The energy landscape and kinetics of medium-sized Ag-Au and Ag-Ni nanoalloy particles are explored via a discrete path sampling approach, focusing on rearrangements connecting regions differing in chemical order. The highly miscible Ag27Au28 supports a large number of nearly degenerate icosahedral homotops. The transformation from reverse core-shell to core-shell involves large displacements away from the icosahedron through elementary steps corresponding to surface diffusion and vacancy formation. The immiscible Ag42Ni13 naturally forms an asymmetric core-shell structure, and about 10 eV is required to extrude the nickel core to the surface. The corresponding transformation occurs via a long and smooth sequence of surface displacements. For both systems the rearrangement kinetics exhibit Arrhenius behavior. These results are discussed in the light of experimental observations.

  13. Conversion of Ag nanowires to AgCI nanowires decorated with Au nanoparticles and their photocatalytic activity.

    SciTech Connect

    Sun, Y.; Center for Nanoscale Materials

    2010-02-11

    A two-step approach has been developed to synthesize AgCl nanowires decorated with Au nanoparticles by using Ag nanowires as chemical templates. In the first step, the Ag nanowires are oxidized with FeCl{sub 3} followed by a simultaneous precipitation reaction between Ag{sup +} and Cl{sup -} ions at room temperature, resulting in conversion of the Ag nanowires to AgCl nanowires as well as reduction of Fe{sup 3+} to Fe{sup 2+} ions. In the second step, the Fe{sup 2+} ions generated in the first step reduce Au precursors (e.g., NaAuCl{sub 4}) to deposit Au nanoparticles on the surfaces of the AgCl nanowires, resulting in the formation of AgCl:Au composite nanowires. Because of strong surface plasmon resonance and chemical inertness of Au nanoparticles, the as-synthesized AgCl:Au nanowires exhibit enhanced absorption coefficient in the visible region and enhanced chemical stability to prevent them from degradation and aggregation. These unique properties enable the AgCl:Au nanowires to be used as a class of promising plasmonic photocatalysts driven by visible light. Preliminary results demonstrate these composite nanowires can efficiently decompose organics, such as methylene blue molecules, under illumination of white light.

  14. Oxygen dissociation at close-packed Pt terraces, Pt steps, and Ag-covered Pt steps studied with density functional theory

    NASA Astrophysics Data System (ADS)

    Šljivančanin, Ž.; Hammer, B.

    2002-08-01

    Using density functional theory we have characterized O 2 dissociation on flat and stepped Pt(1 1 1) surfaces. The reactivity of the steps is significantly higher than that of the flat terraces. Inclusion of Ag monoatomic chains along the Pt steps modifies the reactivity of the Pt steps towards that of the flat Pt terraces. Our investigations reveal the reaction energetics and the geometries for the molecular precursor states (MPS), transition states (TS) and final states of the dissociating oxygen. Both the MPS and TS geometries on stepped Pt involve oxygen species at the top of the step with no oxygen atoms diffusing onto the lower terrace. We further find that the Ag chains mainly modify the adsorption and reaction bond strengths while they leave the MPS and TS geometries essentially unchanged. The high reactivity of the Pt steps is explained in terms of the coordinative unsaturation of the Pt step atoms which cause a highlying valence 5d-electron system.

  15. Au-Ag-Cu nano-alloys: tailoring of permittivity

    NASA Astrophysics Data System (ADS)

    Hashimoto, Yoshikazu; Seniutinas, Gediminas; Balčytis, Armandas; Juodkazis, Saulius; Nishijima, Yoshiaki

    2016-04-01

    Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective.

  16. Au-Ag-Cu nano-alloys: tailoring of permittivity

    PubMed Central

    Hashimoto, Yoshikazu; Seniutinas, Gediminas; Balčytis, Armandas; Juodkazis, Saulius; Nishijima, Yoshiaki

    2016-01-01

    Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective. PMID:27118459

  17. Injection and acceleration of Au31+ in the BNL AGS.

    SciTech Connect

    Fischer,W.; Ahrens, L.; Brown, K.; Gardner, C.; Glenn, W.; Huang, H.; Mapes, M.; Smart, L.; Thieberger, P.; Tsoupas, N.; Zhang, S.Y.; Zeno, K.; Omet, C.; Spiller, P.

    2008-06-23

    Injection and acceleration of ions in a lower charge state reduces space charge effects, and, if further elcctron stripping is needed, may allow elimination of a stripping stage and the associated beam losses. The former is of interest to the accelerators in the GSI FAIR complex, the latter for BNL RHIC collider operation at energies lower than the current injection energy. Lower charge state ions, however, have a higher likelihood of electron stripping which can lead to dynamic pressures rises and subsequent beam losses. We report on experiments in the AGS where Au{sup 31+} ions were injected and accelerated instead of the normally used Au{sup 77+} ions. Beam intensities and the average pressure in the AGS ring are recorded, and compared with calculations for dynamic pressures and beam losses. The experimental results will be used to benchmark the StrahlSim dynamic vacuum code and will be incorporated in the GSI FAIR SIS100 design.

  18. Synthesis of triangular Au core-Ag shell nanoparticles

    SciTech Connect

    Rai, Akhilesh; Chaudhary, Minakshi; Ahmad, Absar; Bhargava, Suresh; Sastry, Murali . E-mail: msastry@tatachemicals.com

    2007-07-03

    In this paper, we demonstrate a simple and reproducible method for the synthesis of triangular Au core-Ag shell nanoparticles. The triangular gold core is obtained by the reduction of gold ions by lemongrass extract. Utilizing the negative charge on the gold nanotriangles, silver ions are bound to their surface and thereafter reduced by ascorbic acid under alkaline conditions. The thickness of the silver shell may be modulated by varying the pH of the reaction medium. The formation of the Au core-Ag shell triangular nanostructures has been followed by UV-vis-NIR Spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM) measurements. The sharp vertices of the triangles coupled with the core-shell structure is expected to have potential for application in surface enhanced Raman spectroscopy and in the sensitive detection of biomolecules.

  19. Effects of Ag addition on FePt L1{sub 0} ordering transition: A direct observation of ordering transition and Ag segregation in FePtAg alloy films

    SciTech Connect

    Wang, Lei; Yu, Youxing; Gao, Tenghua

    2015-12-21

    FePt and (FePt){sub 91.2}Ag{sub 8.8} alloy films were deposited by magnetron sputtering. The average coercivity of (FePt){sub 91.2}Ag{sub 8.8} films reaches 8.51 × 10{sup 5} A/m, which is 0.63 × 10{sup 5} A/m higher than that of the corresponding FePt films. Ag addition effectively promotes the FePt L1{sub 0} ordering transition at a relatively low annealing temperature of 400 °C. The promotion mechanism was investigated by using in situ high-resolution transmission electron microscopy (HRTEM) and ex situ X-ray absorption fine structure (XAFS). The concurrence of ordering transition and Ag segregation in FePtAg alloy films was first observed by using in situ heating HRTEM. The time-resolved evolution reveals more details on the role of Ag addition in FePt low-temperature ordering. Ex situ XAFS results further confirm that Ag replaces Fe sites in the as-deposited films and segregates from FePt-Ag solid solution phase through annealing at elevated temperatures. The segregation of Ag atoms leaves vacancies in the grain. The vacancy formation is believed to accelerate the diffusion of Fe and Pt atoms, which is critical for the L1{sub 0} ordering transition.

  20. Ag-Pt alloy nanoparticles with the compositions in the miscibility gap

    SciTech Connect

    Peng Zhenmeng; Yang Hong

    2008-07-15

    Silver platinum binary alloys with compositions between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at <{approx} 400 deg. C have largely not been observed in bulk due to the large immiscibility between these two metals. We present in this paper that Ag-Pt alloy nanostructures can be made in a broad composition range. The formation of Ag-Pt nanostructures is studied by powder X-ray diffraction (PXRD) and energy-dispersive X-ray (EDX). Our results indicate that lattice parameter changes almost linearly with composition in these Ag-Pt nanomaterials. In another word, lattice parameter and composition relationship follows the Vegard's law, which is a strong indication for the formation of metal alloys. Our transmission electron microscopy (TEM) study shows that the silver-rich Ag-Pt alloy nanostructures have spherical shape, while the platinum-rich ones possess wire-like morphology. The stability and crystal phase are investigated by annealing the alloy nanostructures directly or on carbon supports. - Graphical abstract: While platinum and silver cannot form a solid solution with the composition between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at 400 deg. C or below in bulk form, alloy particles and wires can be made within this miscibility gap at the nanometer scale.

  1. A facile and green strategy for the synthesis of Au, Ag and Au-Ag alloy nanoparticles using aerial parts of R. hypocrateriformis extract and their biological evaluation.

    PubMed

    Godipurge, S S; Yallappa, S; Biradar, Naveen J; Biradar, J S; Dhananjaya, B L; Hegde, Gajanan; Jagadish, K; Hegde, Gurumurthy

    2016-12-01

    A facile and green strategy is reported here to synthesize gold (Au), silver (Ag) and gold-silver (Au-Ag) alloy nanoparticles (NPs) through bio-reduction reactions of aqueous corresponding metal precursors mediated by extracts of aerial parts of R. hypocrateriformis, which act as both reducing and stabilizing agents, under microwave irradiation. UV-vis spectrophotometer, XRD, FT-IR, FESEM/TEM, TGA and EDAX analysis were used to characterize the obtained NPs. The formation of NPs is evident from their surface plasmon resonance peak observed at λmax=∼550, 450 and 500nm for Au, Ag and Au-Ag alloy NPs respectively. XRD pattern revealed that fcc structure, while FT-IR spectra signify the presence of phytochemicals adsorbed on NPs. Such a biofunctionalized NPs were characterized by their weight loss, 30% due to thermal degradation of plant phytochemicals observed in TG analysis. The spherical shape of Au, Ag and Au-Ag alloy NPs (∼10-50nm) is observed by FE-SEM/TEM images. EDAX analysis confirms the expected elemental composition. Moreover, these NPs showed enhanced antimicrobial, antioxidant, and anticancer activities, though it is more pronounced for Au-Ag alloy NPs, which is due to the combining effect of phytochemicals, Au and Ag metals. Thus, the biosynthesized NPs could be applied as effective growth inhibitors for various biomedical applications.

  2. XAS and XMCD studies of magnetic properties modifications of Pt/Co/Au and Pt/Co/Pt trilayers induced by Ga⁺ ions irradiation.

    PubMed

    Mazalski, Piotr; Sveklo, Iosif; Kurant, Zbigniew; Ollefs, Katharina; Rogalev, Andrei; Wilhelm, Fabrice; Fassbender, Juergen; Baczewski, Lech Tomasz; Wawro, Andrzej; Maziewski, Andrzej

    2015-05-01

    Magnetic and magneto-optical properties of Pt/Co/Au and Pt/Co/Pt trilayers subjected to 30 keV Ga(+) ion irradiation are compared. In two-dimensional maps of these properties as a function of cobalt thickness and ion fluence, two branches with perpendicular magnetic anisotropy (PMA) for Pt/Co/Pt trilayers are well distinguished. The replacement of the Pt capping layer with Au results in the two branches still being visible but the in-plane anisotropy for the low-fluence branch is suppressed whereas the high-fluence branch displays PMA. The X-ray absorption spectra and X-ray magnetic circular dichroism (XMCD) spectra are discussed and compared with non-irradiated reference samples. The changes of their shapes and peak amplitude, particularly for the high-fluence branch, are related to the modifications of the local environment of Co(Pt) atoms and the etching effects induced by ion irradiation. Additionally, in irradiated trilayers the XMCD measurements at the Pt L2,3-edge reveal an increase of the magnetic moment induced in Pt atoms.

  3. Sum-frequency generation of acetate adsorption on Au and Pt surfaces: Molecular structure effects

    NASA Astrophysics Data System (ADS)

    Braunschweig, Björn; Mukherjee, Prabuddha; Kutz, Robert B.; Wieckowski, Andrzej; Dlott, Dana D.

    2010-12-01

    The reversible adsorption of acetate on polycrystalline Au and Pt surfaces was investigated with broadband sum-frequency generation (SFG) and cyclic voltammetry. Specifically adsorbed acetate as well as coadsorbed sulfuric acid anions are observed for the first time with SFG and give rise to dramatically different SFG intensities on Au and Pt surfaces. While similar coverages of acetate adlayers on Au and Pt surfaces are well established by previous studies, an identification of the interfacial molecular structure has been elusive. However, we have applied the high sensitivity of SFG for interfacial polar ordering to identify different acetate structures at Au and Pt surfaces in contact with HClO4 and H2SO4 electrolytes. Acetate competes with the formation of surface oxides and shifts the oxidation threshold of both Au and Pt electrodes anodically. Effects of the supporting electrolyte on the formation of acetate adlayers are revealed by comparing SFG spectra in HClO4 and H2SO4 solutions: Sulfuric acid anions modify the potential-dependent acetate adsorption, compete with adsorbed acetate on Au and coadsorb with acetate on Pt surfaces.

  4. Stable excited Au= and Pt= negative ions: A Regge-pole prediction

    NASA Astrophysics Data System (ADS)

    Felfli, Z.; Msezane, A. Z.; Sokolovski, D.

    2010-03-01

    Electron elastic scattering from Au and Pt atoms is investigated in the energy region E < 4.0 eV in search of the possibility of forming and observing stable excited Au= and Pt= negative ions as Regge resonances. Total elastic cross sections (TCSs) and differential cross sections (DCSs) in both impact energy and scattering angle for the excited Au and Pt atoms are calculated. The investigation uses the recent Regge-pole methodology [1] wherein is embedded the vital electron-electron correlations together with a Thomas-Fermi type potential that incorporates the crucial core-polarization interaction, essential for the existence and stability of most negative ions. From the characteristic dramatically sharp resonances in the elastic total and Mulholland partial cross sections we identify excited Au= and Pt= anions and extract their binding energies (BEs). Ramsauer-Townsend minima and shape resonances are also determined. The DCSs also yield the BEs of the Au= and Pt= anions [2]. The TCSs for the excited and ground Au= and Pt= anions are contrasted as well; they provide a clue to the significant catalytic properties of their nanoparticles. [1] D. Sokolovski et al, Phys. Rev. A 76, 012705 (2007); [2] Z. Felfli et al, NIMB, At Press (2010). Supported by U.S. DOE, AFOSR and CAU CFNM, NSF-CREST Program

  5. Stellated Ag-Pt bimetallic nanoparticles: An effective platform for catalytic activity tuning

    PubMed Central

    Liu, Hui; Ye, Feng; Yao, Qiaofeng; Cao, Hongbin; Xie, Jianping; Lee, Jim Yang; Yang, Jun

    2014-01-01

    The usefulness of Pt-based nanomaterials for catalysis can be greatly enhanced by coupling morphology engineering to the strategic presence of a second or even third metal. Here we demonstrate the design and preparation of stellated Ag-Pt bimetallic nanoparticles where significant activity difference between the methanol oxidation reaction (MOR) and the oxygen reduction reaction (ORR) may be realized by relegating Ag to the core or by hollowing out the core. In particular the stellated Pt surface, with an abundance of steps, edges, corner atoms, and {111} facets, is highly effective for the ORR but is ineffective for MOR. MOR activity is only observed in the presence of a Ag core through electronic coupling to the stellated Pt shell. The bimetallic Ag-Pt stellates therefore demonstrate the feasibility of tuning a Pt surface for two very different structure sensitive catalytic reactions. Stellated bimetallics may therefore be an effective platform for highly tunable catalyst designs. PMID:24495979

  6. Nanoporous PtAg and PtCu alloys with hollow ligaments for enhanced electrocatalysis and glucose biosensing.

    PubMed

    Xu, Caixia; Liu, Yunqing; Su, Fa; Liu, Aihua; Qiu, Huajun

    2011-09-15

    Nanoporous silver (NPS) and copper (NPC) obtained by dealloying AgAl and CuAl alloys, respectively, were used as both three-dimensional templates and reducing agents for the fabrication of nanoporous PtAg (NPS-Pt) and PtCu (NPC-Pt) alloys with hollow ligaments by a simple galvanic replacement reaction with H(2)PtCl(6). Electron microscopy and X-ray diffraction characterizations demonstrate that NPS and NPC with similar ligament sizes (30-50 nm) have different effects on the formed hollow nanostructures. For NPS-Pt, the shell of the hollow ligament is seamless. However, the shell of NPC-Pt is comprised of small pores and alloy nanoparticles with a size of ∼3 nm. The as-prepared NPS-Pt and NPC-Pt exhibit remarkably improved electrocatalytic activities towards the oxidation of ethanol and H(2)O(2) compared with state-of-the-art Pt/C catalyst, and can be used for sensitive electrochemical sensing applications. The hierarchical nanoporous structure also provides a good microenvironment for enzymes. After immobilization of glucose oxidase (GOx), the enzyme modified nanoporous electrode can sensitively detect glucose in a wide linear range (0.6-20 mM).

  7. Single gold nanowire electrodes and single Pt@Au nanowire electrodes: electrochemistry and applications.

    PubMed

    Zhang, Yaoyao; Xu, Shen; Xiao, Xiaoqing; Liu, Yong; Qian, Yuanyuan; Li, Yongxin

    2017-03-02

    Single Au nanowire electrodes and single Pt@Au nanowire electrodes showed steady-state voltammetric responses and a fast electron-transfer rate, which have been used to fabricate an E-DNA sensor and investigate the oxygen reduction reaction at the single nanowire level.

  8. Unusual Metal-Metal Bonding in a Dinuclear Pt-Au Complex: Snapshot of a Transmetalation Process.

    PubMed

    Baya, Miguel; Belío, Úrsula; Fernández, Israel; Fuertes, Sara; Martín, Antonio

    2016-06-06

    The dinuclear Pt-Au complex [(CNC)(PPh3 )Pt Au(PPh3 )](ClO4 ) (2) (CNC=2,6-diphenylpyridinate) was prepared. Its crystal structure shows a rare metal-metal bonding situation, with very short Pt-Au and Au-Cipso (CNC) distances and dissimilar Pt-Cipso (CNC) bonds. Multinuclear NMR spectra of 2 show the persistence of the Pt-Au bond in solution and the occurrence of unusual fluxional behavior involving the [Pt(II) ] and [Au(I) ] metal fragments. The [Pt(II) ]⋅⋅⋅ [Au(I) ] interaction has been thoroughly studied by means of DFT calculations. The observed bonding situation in 2 can be regarded as a model for an intermediate in a transmetalation process.

  9. Electrostatic assembles and optical properties of Au CdTe QDs and Ag/Au CdTe QDs

    NASA Astrophysics Data System (ADS)

    Yang, Dongzhi; Wang, Wenxing; Chen, Qifan; Huang, Yuping; Xu, Shukun

    2008-09-01

    Au-CdTe and Ag/Au-CdTe assembles were firstly investigated through the static interaction between positively charged cysteamine-stabilized CdTe quantum dots (QDs) and negatively charged Au or core/shell Ag/Au nano-particles (NCs). The CdTe QDs synthesized in aqueous solution were capped with cysteamine which endowed them positive charges on the surface. Both Au and Ag/Au NCs were prepared through reducing precursors with gallic acid obtained from the hydrolysis of natural plant poly-phenols and favored negative charges on the surface of NCs. The fluorescence spectra of CdTe QDs exhibited strong quenching with the increase of added Au or Ag/Au NCs. Railey resonance scattering spectra of Au or Ag/Au NCs increased firstly and decreased latter with the concentration of CdTe QDs, accompanied with the solution color changing from red to purple and colorless at last. Experimental results on the effects of gallic acid, chloroauric acid tetrahydrate and other reagents demonstrated the static interaction occurred between QDs and NCs. This finding reveals the possibilities to design and control optical process and electromagnetic coupling in hybrid structures.

  10. A new photothermal therapeutic agent: core-free nanostructured Au x Ag1-x dendrites.

    PubMed

    Hu, Kuo-Wei; Huang, Chih-Chia; Hwu, Jih-Ru; Su, Wu-Chou; Shieh, Dar-Bin; Yeh, Chen-Sheng

    2008-01-01

    A new class of Au(x)Ag(1-x) nanostructures with dendrite morphology and a hollow interior were synthesized by using a replacement reaction between Ag dendrites and an aqueous solution of HAuCl(4). The Ag nanostructured dendrites were generated by the reaction of AgNO(3) with ascorbic acid in a methanol/water system. The dendrites resemble a coral shape and are built up of many stems with an asymmetric arrangement. Each stem is approximately 400 nm in length and 65 nm in diameter. The bimetallic composition of Au(x)Ag(1-x) can be tuned by the addition of different amounts of HAuCl(4) to the Ag dendritic solution. The hollowing process resulted in tubular structures with a wall thickness of 10.5 nm in Au(0.3)Ag(0.7) dendrites. The UV/Vis spectra indicate that the strongest NIR absorption among the resulting hollow Au(x)Ag(1-x) dendrites was in Au(0.3)Ag(0.7). The MTT assay was conducted to evaluate the cytotoxicity of Ag dendrites, hollow Au(0.06)Ag(0.94) and Au(0.3)Ag(0.7) dendrites, and Au nanorods. It was found that hollow Au(0.06)Ag(0.94) and Au(0.3)Ag(0.7) dendrites exhibited good biocompatibility, while both Ag dendrites and Au nanorods showed dose-dependent toxicity. Because of absorption in the NIR region, hollow Au(0.3)Ag(0.7) dendrites were used as photothermal absorbers for destroying A549 lung cancer cells. Their photothermal performance was compared to that of Au nanorod photothermal therapeutic agents. As a result, the particle concentration and laser power required for efficient cancer cell damage were significantly reduced for hollow Au(0.3)Ag(0.7) dendrites relative to those used for Au nanorods. The hollow Au(0.3)Ag(0.7) nanostructured dendrites show potential in photothermolysis for killing cancer cells.

  11. Thermal- and pressure-induced cooperative spin transition in the 2D and 3D coordination polymers {Fe(5-Br-pmd)z[M(CN)x]y} (M=AgI, AuI, NiII, PdII, PtII).

    PubMed

    Agustí, Gloria; Gaspar, Ana Belén; Muñoz, M Carmen; Real, José Antonio

    2007-11-12

    A new family of cyanide-based spin-crossover polymers with the general formula {Fe(5-Br-pmd)z[M(CN)x]y} [M=AgI (1), AuI (2), NiII (3), PdII (4), PtII (5); 5-Br-pmd=5-bromopyrimidine; z=1 or 2, x=2 or 4, and y=2 or 1] have been synthesized and characterized using single-crystal X-ray diffraction (XRD), X-ray powder diffraction (XRPD), magnetic susceptibility measurements, and differential scanning calorimetry (DSC). At 293 K, compound 1 presents the monoclinic space group C2/c, whereas at 120 K, it changes to the monoclinic space group P21/c. At 293 K, the crystal structure of 1 displays an uninodal three-dimensional network whose nodes, constituted of FeII, lie at the inversion center of an elongated octahedron. The equatorial bond lengths are defined by the N atoms of four [AgI(CN)2]- groups belonging to two crystallographically nonequivalent AgI atoms, Ag(1) and Ag(2). They are shorter than those of the axial positions occupied by the N atoms of the 5-Br-pmd ligands. The Fe-N average bond length of 2.1657(7) A is consistent with a high-spin (HS) state for the FeII ions. At 120 K, the crystal structure changes refer mainly to the FeII environment. There are two crystallographically independent FeII ions at this temperature, Fe(1) and Fe(2), which adopt the HS and low-spin (LS) states, respectively. The average Fe-N bond length for Fe(1) [2.174(5) A] and Fe(2) [1.955(5) A] agrees well with the reported magnetic data at this temperature. The spin transition of the FeII ions labeled as Fe(1) is found to be centered at Tc downward arrow=149 K and Tc upward arrow=167 K and accompanied by a drastic change of color from orange (HS) to red (LS). Magnetic susceptibility measurements under applied hydrostatic pressure performed on 1 have shown a linear displacement of the transition to higher temperatures while the hysteresis width remains unaltered in the interval of pressures of 105 Pa to 0.34 GPa. A further increase of the pressure induces the spin transition in the Fe(2

  12. Facile Synthesis of Quasi-One-Dimensional Au/PtAu Heterojunction Nanotubes and Their Application as Catalysts in an Oxygen-Reduction Reaction.

    PubMed

    Cai, Kai; Liu, Jiawei; Zhang, Huan; Huang, Zhao; Lu, Zhicheng; Foda, Mohamed F; Li, Tingting; Han, Heyou

    2015-05-11

    An intermediate-template-directed method has been developed for the synthesis of quasi-one-dimensional Au/PtAu heterojunction nanotubes by the heterogeneous nucleation and growth of Au on Te/Pt core-shell nanostructures in aqueous solution. The synthesized porous Au/PtAu bimetallic nanotubes (PABNTs) consist of porous tubular framework and attached Au nanoparticles (AuNPs). The reaction intermediates played an important role in the preparation, which fabricated the framework and provided a localized reducing agent for the reduction of the Au and Pt precursors. The Pt7 Au PABNTs showed higher electrocatalytic activity and durability in the oxygen-reduction reaction (ORR) in 0.1 M HClO4 than porous Pt nanotubes (PtNTs) and commercially available Pt/C. The mass activity of PABNTs was 218 % that of commercial Pt/C after an accelerated durability test. This study demonstrates the potential of PABNTs as highly efficient electrocatalysts. In addition, this method provides a facile strategy for the synthesis of desirable hetero-nanostructures with controlled size and shape by utilizing an intermediate template.

  13. Theoretical study of CO oxidation on cationic, neutral, and anionic AuM dimers (M = Pd and Ag).

    PubMed

    Chen, Xuan; Lu, Rui-Feng; Kan, Er-Jun; Liu, Yu-Zhen; Xiao, Chuan-Yun; Deng, Kai-Ming

    2014-06-01

    The CO and O2 adsorption as well as CO oxidation on cationic, neutral, and anionic AuM dimers (M = Pd, Ag) are studied by density functional calculations. Our results show that CO and O2 are adsorbed more stably on AuPd dimers than on AuAg dimers with corresponding charge state. O2 is favorable to be adsorbed on Pd atom in AuPd(+), AuPd and AuPd(-) dimers. CO is adsorbed on Pd in AuPd and AuPd(-), while it is favorable to be adsorbed on Au in AuPd(+). For AuAg dimers, O2 is adsorbed on Ag in AuAg and AuAg(-), and it is adsorbed on Au in AuAg(+). CO is adsorbed on Ag in AuPd(-), while it is adsorbed on Au in AuAg and AuAg(+). The CO oxidation reaction is explored along two possible pathways: path-1 involves CO attacking the initial complexes of AuM dimers and O2, and path-2 is related to O2 interacting with the complexes of AuM dimers and CO. The charge state of AuM dimers has a substantial effect on CO oxidation. The reaction on AuPd(-) prefers path-1, and AuPd(+) mediated reaction proceeds along path-2, while CO oxidation on AuPd is difficult along both paths. For AuAg, both pathways are viable for AuAg(-) mediated reactions, while AuAg and AuAg(+) mediated reactions prefer path-2. Moreover, the energy barriers of CO oxidation on neutral AuAg is comparable with those on AuPd in all charge states while the energy barriers for AuAg(-) and AuAg(+) are considerably lower than those for all AuPd dimmers, indicating the impurity atom also plays a significant role in the catalytic activity. Furthermore, AuAg(-) is proposed to be the most active species due to the lowest barrier involved in the reaction.

  14. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction

    NASA Astrophysics Data System (ADS)

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-12-01

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611} high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H2PtCl6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells.

  15. Synthesis of Au@Pt bimetallic nanoparticles with concave Au nanocuboids as seeds and their enhanced electrocatalytic properties in the ethanol oxidation reaction.

    PubMed

    Tan, Lingyu; Li, Lidong; Peng, Yi; Guo, Lin

    2015-12-18

    Herein, a new type of uniform and well-structured Au@Pt bimetallic nanoparticles (BNPs) with highly active concave Au nanocuboids (NCs) as seeds was successfully synthesized by using the classic seed-mediated method. Electrochemical measurements were conducted to demonstrate their greatly enhanced catalytic performance in the ethanol oxidation reaction (EOR). It was found that the electrochemical performance for Au@Pt BNPs with the concave Au NCs as seeds, which were enclosed by {611} high-index facets, could be seven times higher than that of the Au@Pt bimetallic nanoparticles with regular spherical Au NPs as seeds. Furthermore, our findings show that the morphology and electrocatalytic activity of the Au@Pt BNPs can be tuned simply by changing the compositional ratios of the growth solution. The lower the amount of H2PtCl6 used in the growth solution, the thinner the Pt shell grew, and the more high-index facets of concave Au NCs seeds were exposed in Au@Pt BNPs, leading to higher electrochemical activity. These as-prepared concave Au@Pt BNPs will open up new strategies for improving catalytic efficiency and reducing the use of the expensive and scarce resource of platinum in the ethanol oxidation reaction, and are potentially applicable as electrochemical catalysts for direct ethanol fuel cells.

  16. Local structure of disordered Au-Cu and Au-Ag alloys

    NASA Astrophysics Data System (ADS)

    Frenkel, A. I.; Machavariani, V. Sh.; Rubshtein, A.; Rosenberg, Yu.; Voronel, A.; Stern, E. A.

    2000-10-01

    X-ray-absorption fine structure (XAFS) and x-ray-diffraction (XRD) measurements of disordered alloys AuxCu1-x and Au0.5Ag0.5 prepared by melt spinning were performed. In the Au0.5Ag0.5 alloy, no significant local deviations of the atoms from the average fcc lattice were detected while in AuxCu1-x alloys, significant deviations of atoms from the average fcc lattice were found. Mean-square vibrations of the Cu-Cu distances revealed by the XAFS in AuxCu1-x alloys indicate the weakening of contact between Cu atoms in the dilute limit. Our computer simulation for AuxCu1-x clusters of 105 atoms reproduces the main features of both the XAFS and XRD data.

  17. TUNING OF SIZE AND SHAPE OF AU-PT NANOCATALYST FOR DIRECT METHANOL FUEL CELLS

    SciTech Connect

    Murph, S.

    2011-04-20

    In this paper, we report the precise control of the size, shape and surface morphology of Au-Pt nanocatalysts (cubes, blocks, octahedrons and dogbones) synthesized via a seed-mediated approach. Gold 'seeds' of different aspect ratios (1 to 4.2), grown by a silver-assisted approach, were used as templates for high-yield production of novel Au-Pt nanocatalysts at a low temperature (40 C). Characterization by electron microscopy (SEM, TEM, HRTEM), energy dispersive X-ray analysis (EDX), UV-Vis spectroscopy, zeta-potential (surface charge), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry (ICP-MS) were used to better understand their physico-chemical properties, preferred reactivities and underlying nanoparticle growth mechanism. A rotating disk electrode was used to evaluate the Au-Pt nanocatalysts electrochemical performance in the oxygen reduction reaction (ORR) and the methanol oxidation reaction (MOR) of direct methanol fuel cells. The results indicate the Au-Pt dogbones are partially and in some cases completely unaffected by methanol poisoning during the evaluation of the ORR. The ORR performance of the octahedron particles in the absence of MeOH is superior to that of the Au-Pt dogbones and Pt-black, however its performance is affected by the presence of MeOH.

  18. Magnetic susceptibility and hardness of Au-xPt-yNb alloys for biomedical applications.

    PubMed

    Uyama, Emi; Inui, Shihoko; Hamada, Kenichi; Honda, Eiichi; Asaoka, Kenzo

    2013-09-01

    Metal devices in the human body induce serious metal artifacts in magnetic resonance imaging (MRI). Metals artifacts are mainly caused by a volume magnetic susceptibility (χv) mismatch between a metal device and human tissue. In this research, Au-xPt-yNb alloys were developed for fabricating MRI artifact-free biomedical metal devices. The magnetic properties, hardness and phase constitutions of these alloys were investigated. The Au-xPt-8Nb alloys showed satisfactory χv values. Heat treatments did not clearly change the χv values for Au-xPt-8Nb alloys. The Vickers hardness (HV) of these two alloys was much higher than that of high-Pt alloys; moreover, aging at 700°C increased the HV values of these two alloys. A dual phase structure consisting of face-centered cubic α1 and α2 phases was observed and aging at 700°C promoted phase separation. The Au-5Pt-8Nb and Au-10Pt-8Nb alloys showed satisfactory χv values and high hardness and are thus suggested as candidates for MRI artifact-free alloys for biomedical applications.

  19. Inner shell excitation of Cu, Ag and Au

    NASA Astrophysics Data System (ADS)

    Stauffer, Allan; McEachran, Robert

    2016-09-01

    The ground states of Cu, Ag and Au have the configuration nd10(n +1)s with n = 3, 4 and 5. The lowest excited manifold for Cu and Au has the configuration nd9(n +1)s2 which is well separated from the next excited manifold nd10(n +1)p. However, for Ag, the lowest 4d95s2 level with J = 5/2 lies between the two levels of the 4d105p manifold. In we compared our Relativistic Distorted Wave calculations for the excitation of the 4d105p manifold with experimental measurements which would have included a contribution from the 4d95s2 J = 5/2 level. While we do not expect the cross section for this forbidden transition to be large compared to the optical allowed transitions of the P levels, we decided to investigate excitation of these inner shell levels, in part because they are the lowest excited levels in Cu and Au, We will discuss the theoretical expressions for these excitations as well as give numerical results of our cross section calculations.

  20. Physical properties of FePt nanocomposite doped with Ag atoms: First-principles study

    NASA Astrophysics Data System (ADS)

    Jia, Yong-Fei; Shu, Xiao-Lin; Xie, Yong; Chen, Zi-Yu

    2014-07-01

    L10 FePt nanocomposite with high magnetocrystalline anisotropy energy has been extensively investigated in the fields of ultra-high density magnetic recording media. However, the order—disorder transition temperature of the nanocomposite is higher than 600 °C, which is a disadvantage for the use of the material due to the sustained growth of FePt grain under the temperature. To address the problem, addition of Ag atoms has been proposed, but the magnetic properties of the doped system are still unclear so far. Here in this paper, we use first-principles method to study the lattice parameters, formation energy, electronic structure, atomic magnetic moment and order—disorder transition temperature of L10 FePt with Ag atom doping. The results show that the formation energy of a Ag atom substituting for a Pt site is 1.309 eV, which is lower than that of substituting for an Fe site 1.346 eV. The formation energy of substituting for the two nearest Pt sites is 2.560 eV lower than that of substituting for the further sites 2.621 eV, which indicates that Ag dopants tend to segregate L10 FePt. The special quasirandom structures (SQSs) for the pure FePt and the FePt doped with two Ag atoms at the stable Pt sites show that the order—disorder transition temperatures are 1377 °C and 600 °C, respectively, suggesting that the transition temperature can be reduced with Ag atom, and therefore the FePt grain growth is suppressed. The saturation magnetizations of the pure FePt and the two Ag atoms doped FePt are 1083 emu/cc and 1062 emu/cc, respectively, indicating that the magnetic property of the doped system is almost unchanged.

  1. Corrosion behavior of Au and Ag modified Cu-Ni-Mn alloys.

    PubMed

    Wright, S R; Cocks, F H; Gettleman, L

    1980-04-01

    The linear electrochemical polarization method was used to provide quantitative in vitro measurements of corrosion rates as a function of exposure time for Cu-Ni-Mn, Cu-Ni-Mn-Au, Cu-Ni-Mn-Ag, and Cu-Ni-Mn-Au-Ag alloys in artificial saliva. Both Au and Ag additives to dental-cast Cu-Ni-Mn alloys lowered the corrosion rate significantly.

  2. Bonding, Luminescence, Metallophilicity in Linear Au3 and Au2Ag Chains Stabilized by Rigid Diphosphanyl NHC Ligands.

    PubMed

    Ai, Pengfei; Mauro, Matteo; Gourlaouen, Christophe; Carrara, Serena; De Cola, Luisa; Tobon, Yeny; Giovanella, Umberto; Botta, Chiara; Danopoulos, Andreas A; Braunstein, Pierre

    2016-09-06

    The heterofunctional and rigid ligand N,N'-diphosphanyl-imidazol-2-ylidene (PCNHCP; P = P(t-Bu)2), through its phosphorus and two N-heterocyclic carbene (NHC) donors, stabilizes trinuclear chain complexes, with either Au3 or AgAu2 cores, and dinuclear Au2 complexes. The two oppositely situated PCNHCP (L) ligands that "sandwich" the metal chain can support linear and rigid structures, as found in the known tricationic Au(I) complex [Au3(μ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 (OTf = CF3SO3; [Au3L2](OTf)3; Chem. Commun. 2014, 50, 103-105) now also obtained by transmetalation from [Ag3(μ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 ([Ag3L2](OTf)3), or in the mixed-metal tricationic [Au2Ag(μ3-PCNHCP,κP,κCNHC,κP)2](OTf)3 ([Au2AgL2](OTf)3). The latter was obtained stepwise by the addition of AgOTf to the digold(I) complex [Au2(μ2-PCNHCP,κP,κCNHC)2](OTf)2 ([Au2L2](OTf)2). The latter contains two dangling P donors and displays fluxional behavior in solution, and the Au···Au separation of 2.8320(6) Å in the solid state is consistent with metallophilic interactions. In the solvento complex [Au3Cl2(tht)(μ3-PCNHCP,κP,κCNHC,κP)](OTf)·MeCN ([Au3Cl2(tht)L](OTf)·MeCN), which contains only one L and one tht ligand (tht = tetrahydrothiophene), the metal chain is bent (148.94(2)°), and the longer Au···Au separation (2.9710(4) Å) is in line with relaxation of the rigidity due to a more "open" structure. Similar features were observed in [Au3Cl2(SMe2)L](OTf)·2MeCN. A detailed study of the emission properties of [Au3L2](OTf)3, [Au3Cl2(tht)L](OTf)·MeCN, [Au2L2](OTf)2, and [Au2AgL2](OTf)3 was performed by means of steady state and time-resolved photophysical techniques. The complex [Au3L2](OTf)3 displays a bright (photoluminescence quantum yield = 80%) and narrow emission band centered at 446 nm with a relatively small Stokes' shift and long-lived excited-state lifetime on the microsecond timescale, both in solution and in the solid state. In line with the very narrow emission

  3. Hollow Au-Ag Nanoparticles Labeled Immunochromatography Strip for Highly Sensitive Detection of Clenbuterol

    NASA Astrophysics Data System (ADS)

    Wang, Jingyun; Zhang, Lei; Huang, Youju; Dandapat, Anirban; Dai, Liwei; Zhang, Ganggang; Lu, Xuefei; Zhang, Jiawei; Lai, Weihua; Chen, Tao

    2017-01-01

    The probe materials play a significant role in improving the detection efficiency and sensitivity of lateral-flow immunochromatographic test strip (ICTS). Unlike conventional ICTS assay usually uses single-component, solid gold nanoparticles as labeled probes, in our present study, a bimetallic, hollow Au-Ag nanoparticles (NPs) labeled ICTS was successfully developed for the detection of clenbuterol (CLE). The hollow Au-Ag NPs with different Au/Ag mole ratio and tunable size were synthesized by varying the volume ratio of [HAuCl4]:[Ag NPs] via the galvanic replacement reaction. The surface of hollow Ag-Au NPs was functionalized with 11-mercaptoundecanoic acid (MUA) for further covalently bonded with anti-CLE monoclonal antibody. Overall size of the Au-Ag NPs, size of the holes within individual NPs and also Au/Ag mole ratio have been systematically optimized to amplify both the visual inspection signals and the quantitative data. The sensitivity of optimized hollow Au-Ag NPs probes has been achieved even as low as 2 ppb in a short time (within 15 min), which is superior over the detection performance of conventional test strip using Au NPs. The optimized hollow Au-Ag NPs labeled test strip can be used as an ideal candidate for the rapid screening of CLE in food samples.

  4. Hollow Au-Ag Nanoparticles Labeled Immunochromatography Strip for Highly Sensitive Detection of Clenbuterol

    PubMed Central

    Wang, Jingyun; Zhang, Lei; Huang, Youju; Dandapat, Anirban; Dai, Liwei; Zhang, Ganggang; Lu, Xuefei; Zhang, Jiawei; Lai, Weihua; Chen, Tao

    2017-01-01

    The probe materials play a significant role in improving the detection efficiency and sensitivity of lateral-flow immunochromatographic test strip (ICTS). Unlike conventional ICTS assay usually uses single-component, solid gold nanoparticles as labeled probes, in our present study, a bimetallic, hollow Au-Ag nanoparticles (NPs) labeled ICTS was successfully developed for the detection of clenbuterol (CLE). The hollow Au-Ag NPs with different Au/Ag mole ratio and tunable size were synthesized by varying the volume ratio of [HAuCl4]:[Ag NPs] via the galvanic replacement reaction. The surface of hollow Ag-Au NPs was functionalized with 11-mercaptoundecanoic acid (MUA) for further covalently bonded with anti-CLE monoclonal antibody. Overall size of the Au-Ag NPs, size of the holes within individual NPs and also Au/Ag mole ratio have been systematically optimized to amplify both the visual inspection signals and the quantitative data. The sensitivity of optimized hollow Au-Ag NPs probes has been achieved even as low as 2 ppb in a short time (within 15 min), which is superior over the detection performance of conventional test strip using Au NPs. The optimized hollow Au-Ag NPs labeled test strip can be used as an ideal candidate for the rapid screening of CLE in food samples. PMID:28134263

  5. Synthesis of biocompatible AuAgS/Ag2S nanoclusters and their applications in photocatalysis and mercury detection

    NASA Astrophysics Data System (ADS)

    Zhao, Qian; Chen, Shenna; Zhang, Lingyang; Huang, Haowen; Liu, Fengping; Liu, Xuanyong

    2014-12-01

    In this paper, a facile approach for preparation of AuAgS/Ag2S nanoclusters was developed. The unique AuAgS/Ag2S nanoclusters capped with biomolecules exhibit interesting excellent optical and catalytic properties. The fluorescent AuAgS/Ag2S nanoclusters show tunable luminescence depending on the nanocluster size. The apoptosis assay demonstrated that the AuAgS/Ag2S nanoclusters showed low cytotoxicity and good biocompatibility. Therefore, the nanoclusters can be used not only as a probe for labeling cells but also for their photocatalytic activity for photodegradation of organic dye. Moreover, a highly selective and sensitive assay for detection of mercury including Hg2+ and undissociated mercury complexes was developed based on the quenching fluorescent AuAgS/Ag2S nanoclusters, which provides a promising approach for determining various forms of Hg in the mercury-based compounds in environment. These unique nanoclusters may have potential applications in biological labeling, sensing mercury, and photodegradation of various organic pollutants in waste water.

  6. Superior anti-CO poisoning capability: Au-decorated PtFe nanocatalysts for high-performance methanol oxidation.

    PubMed

    Cai, Zhao; Lu, Zhiyi; Bi, Yongmin; Li, Yaping; Kuang, Yun; Sun, Xiaoming

    2016-03-11

    Herein we demonstrate a surface engineering strategy, namely, decorating Au on the surface of bimetallic PtFe nanocatalysts, to effectively decrease the adsorption energy of CO on the Pt center, which promotes the electrocatalytic activity towards methanol oxidation, far better than those of PtFe and commercial Pt/C catalysts.

  7. Enhanced electrocatalytic activity of the Au-electrodeposited Pt nanoparticles-coated conducting oxide for the quantum dot-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Yoon, Yeung-Pil; Kim, Jae-Hong; Kang, Soon-Hyung; Kim, Hyunsoo; Choi, Chel-Jong; Kim, Kyong-Kook; Ahn, Kwang-Soon

    2014-08-01

    Au was electrodeposited potentiostatically at 0.3 V for 5 min on nanoporous Pt nanoparticle-coated F-doped SnO2 (FTO/Pt) substrates. For comparison, Au-electrodeposited FTO (FTO/Au) and Au-uncoated FTO/Pt were prepared. FTO/Au showed large-sized Au clusters dispersed sparsely over FTO, which resulted in lower electrocatalytic activity than FTO/Pt. In contrast, FTO/Pt exhibited poor stability unlike FTO/Au due to poisoning by the adsorption of sulfur species. The Au-electrodeposited FTO/Pt (FTO/Pt/Au) consisted of small Au clusters deposited over the entire area of Pt due to the effective Au nucleation provided by nanoporous metallic Pt. FTO/Pt/Au exhibited enhanced electrocatalytic activity and excellent stability because the small Au particles well-dispersed over the nanoporous metallic Pt network provided numerous electrochemical reaction sites, and the Pt surface was not exposed to the electrolyte. When FTO/Pt/Au was used as the counter electrode (CE) of a quantum dot-sensitized solar cell, the significantly enhanced electrocatalytic activity of the FTO/Pt/Au CE facilitated the reduction reaction of Sn2- + 2e- (CE) → Sn-12- + S2- at the CE/electrolyte interface, resulting in a significantly hindered recombination reaction, Sn2- + 2e- (TiO2 in the photoanode) → Sn-12- + S2-, and significantly improved overall energy conversion efficiency.

  8. Surface enhanced Raman scattering of 4-aminothiophenol sandwiched between Ag nanocubes and smooth Pt substrate: The effect of the thickness of Pt film

    NASA Astrophysics Data System (ADS)

    Zhu, Shuangmei; Fan, Chunzhen; Wang, Junqiao; He, Jinna; Liang, Erjun; Chao, Mingju

    2014-07-01

    Ag nanocubes (NCs)/4-aminothiophenol (p-ATP)/smooth platinum (Pt) film (Ag-NCs @ p-ATP/Pt) sandwich structure is created for surface enhanced Raman scattering (SERS). The proposed sandwich structure is shown to exhibit better performance than the Ag-NCs only as SERS substrate. The dependence of the Raman signal intensity on the thickness of the Pt films is examined. It is shown that the Raman signal increases with the thickness of the Pt films from 42 to 90 nm, suggesting the electromagnetic coupling of the localized surface plasmons of the Ag-NCs with the surface plasmon polaritons of the underneath Pt film, which is confirmed by our numerical simulations. The SERS enhancement factor in Ag-NCs @ p-ATP/Pt is estimated to be (4.1 ± 0.2) × 106 for a Pt film of 90 nm.

  9. Graphene decorated with PtAu alloy nanoparticles: facile synthesis and promising application for formic acid oxidation

    SciTech Connect

    Zhang, Sheng; Shao, Yuyan; Liao, Honggang; Liu, Jun; Aksay, Ilhan A.; Yin, Geping; Lin, Yuehe

    2011-03-01

    PtAu alloy nanoparticles (~ 3.2 nm in diameter) are synthesized in poly(diallyldimethylammonium chloride) (PDDA) aqueous solution and uniformly dispersed on graphene nanosheets. PtAu/graphene exhibits high electrocatalytic activity and stability for formic acid oxidation, which is attributed to the high dispersion of PtAu nanoparticles and the specific interaction between PtAu and graphene, indicating a promising catalyst for direct formic acid fuel cells. The facile method can be readily extended to the synthesis of other alloy nanoparticles.

  10. Formation of one-dimensional Ag-Au solid solution colloids with Au nanorods as seeds, their alloying mechanisms, and surface plasmon resonances

    NASA Astrophysics Data System (ADS)

    Guo, Tao; Tan, Yiwei

    2012-12-01

    In this work, one dimensional (1D) Ag-Au solid solution nanoalloys were synthesized by rapidly diffusing Ag into the preformed Au nanorod (AuNR) seeds at ambient temperature in aqueous solution. By varying the molar ratio of AgCl/AuNR (in gold atoms), two kinds of 1D Ag-Au alloy nanostructures with a narrow size distribution--AgAu nanowires and Ag33Au67 nanorods--could be obtained in high yields when NaCl and polyvinylpyrrolidone (PVP) were used as an additive and capping reagent, respectively. Based on HRTEM imaging combined with a series of control experiments, it is conceivable that vacancy/defect-motivated interdiffusion of Ag and Au atoms coupled with oxidative etching is a crucial stage in the mechanism responsible for this room-temperature alloying process, and the subsequent conjugation of the fused Ag-Au alloyed nanostructures is associated with the formation of the AgAu nanowires. The resulting 1D Ag-Au nanoalloys form stable colloidal dispersions and show unique localized surface plasmon resonance (LSPR) peaks in the ensemble extinction spectra.In this work, one dimensional (1D) Ag-Au solid solution nanoalloys were synthesized by rapidly diffusing Ag into the preformed Au nanorod (AuNR) seeds at ambient temperature in aqueous solution. By varying the molar ratio of AgCl/AuNR (in gold atoms), two kinds of 1D Ag-Au alloy nanostructures with a narrow size distribution--AgAu nanowires and Ag33Au67 nanorods--could be obtained in high yields when NaCl and polyvinylpyrrolidone (PVP) were used as an additive and capping reagent, respectively. Based on HRTEM imaging combined with a series of control experiments, it is conceivable that vacancy/defect-motivated interdiffusion of Ag and Au atoms coupled with oxidative etching is a crucial stage in the mechanism responsible for this room-temperature alloying process, and the subsequent conjugation of the fused Ag-Au alloyed nanostructures is associated with the formation of the AgAu nanowires. The resulting 1D Ag-Au

  11. Microwave spectroscopy of AgCCH and AuCCH in the X˜1Σ+ states

    NASA Astrophysics Data System (ADS)

    Okabayashi, Toshiaki; Kubota, Hirofumi; Araki, Mitsunori; Kuze, Nobuhiko

    2013-07-01

    The rotational spectra of AgCCH and AuCCH were measured using Fourier-transform microwave (FTMW) and source-modulated millimeter-wave spectrometers. For the FTMW measurements, AgCCH and AuCCH were generated in supersonic jets using the pulse-discharge reaction of laser-ablated metal atoms with HCCH diluted with Ar. For the millimeter-wave measurements, these molecules were generated in a free-space cell by sputtering of metal sheets. Rotational transitions were measured for 107AgCCH, 109AgCCH, 107AgCCD, 109AgCCD, AuCCH, and AuCCD. The r0 structures of both molecules were obtained from the rotational constants. The quadrupole parameters of the Au and D nuclei were compared with those of other metal monoacetylides.

  12. Cu-Ag sulfides as indicators of pre-porphyritic epithermal Au-Ag deposits in Northeastern Russia

    NASA Astrophysics Data System (ADS)

    Savva, N. E.; Sidorov, A. A.; Volkov, A. V.

    2016-08-01

    Au-Ag mineralization of the Olcha and Teploe epithermal deposits underwent thermal metamorphism due to porphyritic intrusions. The presence of Bi-bearing galena and matildite in the ores (Teploe), Cu-Te-bearing naumannite (Olcha), the occurrence of middle- and high-temperature facies of metasomatic rocks (epidote and actinolite), and temperature formation conditions are related, firstly, to the influence of granitoids on the ore process, which supplied not only Cu and Mo, but also Bi, Te, and, secondly, to the heating of host rocks containing pre-porphyritic epithermal Au-Ag mineralization. The abundance of Cu-Ag sulfides and Cu-acanthite resulted from the enrichment of later mineral phases in Cu and Ag under the substance redistribution with the formation of Ag-acanthite ores. The data considered in the paper are of practical importance for regional forecasting of metallogenic constructions, exploration, and evaluation of the epithermal Au-Ag deposits.

  13. J /ψ production at low pT in Au + Au and Cu + Cu collisions at √sNN =200 GeV with the STAR detector

    NASA Astrophysics Data System (ADS)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Anson, C. D.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Banerjee, A.; Beavis, D. R.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Borowski, W.; Bouchet, J.; Brandin, A. V.; Brovko, S. G.; Bültmann, S.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Campbell, J. M.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, L.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chwastowski, J.; Codrington, M. J. M.; Contin, G.; Cramer, J. G.; Crawford, H. J.; Cui, X.; Das, S.; Davila Leyva, A.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; Derradi de Souza, R.; di Ruzza, B.; Didenko, L.; Dilks, C.; Ding, F.; Djawotho, P.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Engle, K. S.; Eppley, G.; Eun, L.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Fedorisin, J.; Filip, P.; Fisyak, Y.; Flores, C. E.; Gagliardi, C. A.; Gangadharan, D. R.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Gliske, S.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, A.; Gupta, S.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.-X.; Haque, R.; Harris, J. W.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, B.; Huang, H. Z.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Kesich, A.; Khan, Z. H.; Kikola, D. P.; Kisel, I.; Kisiel, A.; Koetke, D. D.; Kollegger, T.; Konzer, J.; Koralt, I.; Kosarzewski, L. K.; Kotchenda, L.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kulakov, I.; Kumar, L.; Kycia, R. A.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; Li, C.; Li, W.; Li, X.; Li, X.; Li, Y.; Li, Z. M.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, G. L.; Ma, Y. G.; Mahapatra, D. P.; Majka, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; McShane, T. S.; Minaev, N. G.; Mioduszewski, S.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nelson, J. M.; Nigmatkulov, G.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Ohlson, A.; Okorokov, V.; Oldag, E. W.; Olvitt, D. L.; Page, B. S.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Pawlik, B.; Pei, H.; Perkins, C.; Pile, P.; Planinic, M.; Pluta, J.; Poljak, N.; Poniatowska, K.; Porter, J.; Poskanzer, A. M.; Powell, C. B.; Pruthi, N. K.; Przybycien, M.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Riley, C. K.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Ross, J. F.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sangaline, E.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Simko, M.; Skoby, M. J.; Smirnov, D.; Smirnov, N.; Solanki, D.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stevens, J. R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Sun, X.; Sun, X. M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D. N.; Symons, T. J. M.; Szelezniak, M. A.; Takahashi, J.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Trzeciak, B. A.; Tsai, O. D.; Turnau, J.; Ullrich, T.; Underwood, D. G.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Vanfossen, J. A.; Varma, R.; Vasconcelos, G. M. S.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Viyogi, Y. P.; Vokal, S.; Vossen, A.; Wada, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J. S.; Wang, X. L.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Xiao, Z.; Xie, W.; Xin, K.; Xu, H.; Xu, J.; Xu, N.; Xu, Q. H.; Xu, Y.; Xu, Z.; Yan, W.; Yang, C.; Yang, Y.; Yang, Y.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zbroszczyk, H.; Zha, W.; Zhang, J. B.; Zhang, J. L.; Zhang, S.; Zhang, X. P.; Zhang, Y.; Zhang, Z. P.; Zhao, F.; Zhao, J.; Zhong, C.; Zhu, X.; Zhu, Y. H.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2014-08-01

    The J /ψ pT spectrum and nuclear modification factor (RAA) are reported for pT<5GeV /c and |y|<1 from 0% to 60% central Au +Au and Cu +Cu collisions at √sNN =200GeV at STAR. A significant suppression of pT-integrated J /ψ production is observed in central Au +Au events. The Cu +Cu data are consistent with no suppression, although the precision is limited by the available statistics. RAA in Au +Au collisions exhibits a strong suppression at low transverse momentum and gradually increases with pT. The data are compared to high-pT STAR results and previously published BNL Relativistic Heavy Ion Collider results. Comparing with model calculations, it is found that the invariant yields at low pT are significantly above hydrodynamic flow predictions but are consistent with models that include color screening and regeneration.

  14. Transmission electron microscopy characterization of Au/Pt/Ti/Pt/GaAs ohmic contacts for high power GaAs/InGaAs semiconductor lasers.

    PubMed

    Łaszcz, A; Czerwinski, A; Ratajczak, J; Szerling, A; Phillipp, F; Van Aken, P A; Katcki, J

    2010-03-01

    We report on transmission electron microscopy studies of Au/Pt/Ti/Pt(10-30 nm) contact structures for high power GaAs/InGaAs semiconductor lasers. The studies showed that annealing at 450 degrees C of contact structures causes the reaction of whole Pt with substrate components (Ga and As) and the formation of Pt-GaAs interlayers with smooth interfaces as required for such structures. Annealing of the structures at 470 and 490 degrees C unfavourably affects the contact structure. At this condition, the strong downward diffusion of Au and Pt from the top layers causes a formation of Au-Pt pits, which break the Ti barrier. Transmission electron microscopy observation revealed that Au/Pt/Ti/Pt(10-30 nm) system annealed at 450 degrees C is appropriate for practical applications. The EDS technique used to identify the phase composition in the Pt(30 nm)/GaAs structure (specially produced for the EDS analysis) annealed at 450 degrees C showed that two layers were formed as a result of the reaction of the whole Pt layer with GaAs, and they consist of Ga, Pt and As. The top layer has the highest concentration of Ga. However, the bottom layer, which is close to the substrate, has the highest concentration of As.

  15. The Effect of Sulfur Fugacity on Pt, Pd and Au in Magmatic-Hydrothermal Systems

    NASA Astrophysics Data System (ADS)

    Bell, A.; Simon, A.

    2009-05-01

    We have constrained experimentally the effect of sulfur fugacity (fS2) and sulfide saturation on the fractionation and partitioning behavior of Pt, Pd and Au in a felsic silicate melt + sulfide crystal/melt + oxide + supercritical aqueous fluid phase + Pt + Pd + Au system. Experiments were performed at 800°C, 150 MPa, with oxygen fugacity (fO2) fixed at approximately the nickel + nickel oxide buffer (NNO). Sulfur fugacity in the experiments was varied five orders of magnitude from approximately logfS2 = 0 to logfS2 = -5 by using two different sulfide phase assemblages. Sulfide assemblage one consisted initially of chalcopyrite plus pyrrhotite and assemblage two consisted of chalcopyrite plus bornite. At run conditions, in both assemblages, pyrrhotite transformed compositionally to monosulfide solid solution (mss), chalcopyrite to intermediate solid solution (Iss), and in assemblage two chalcopyrite and bornite formed a sulfide melt. Run- product silicate glass (i.e., quenched silicate melt) and crystalline materials were analyzed by using both electron probe microanalysis (EPMA) for major elements and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for major and trace elements. The measured concentrations of Pt, Pd, and Au in quenched silicate melt in runs with logfS2 values ranging from approximately 0 to -5, do not exhibit any apparent dependence on the dissolved sulfur content of the melt. The measured Pt, Pd and Au concentrations in mss vary as a function of fS2. The measured Pt, Pd and Au concentrations in Iss do not appear to be dependent on fS2. The system variables fS2 and fO2, working in concert with each other, control the stable magmatic sulfide phase assemblage. Additionally, the system fS2 strongly influences the solubility of Pt, Pd, and Au as lattice bound components in some common crystalline magmatic sulfide phases. Both the stable magmatic sulfide phase assemblage and the solubility of Pt, Pd, and Au as constituents in

  16. Au-Pt bimetallic nanoparticles supported on nest-like MnO2: synthesis and application in HCHO decomposition

    NASA Astrophysics Data System (ADS)

    Yu, Xuehua; He, Junhui; Wang, Donghui; Hu, Yucai; Tian, Hua; Dong, Tongxin; He, Zhicheng

    2012-11-01

    Facile synthesis of Au-Pt bimetallic nanoparticles (Au1- x Pt x NPs) and mixtures of Au NPs and Pt NPs ((100 % - y)Au/ yPt NPs) and their subsequent deposition on nest-like MnO2 nanostructures were presented. The as-prepared products were characterized by means of UV-visible spectroscopy, X-ray diffraction, scanning and transmission electron microscopy, and energy dispersive spectroscopy. TEM analyses showed that noble metal NPs were evenly dispersed on the surface of nest-like MnO2 nanostructures and no agglomeration was observed. The as-prepared metal NPs supported catalysts showed higher catalytic activities than MnO2 nanostructures for oxidative decomposition of formaldehyde (HCHO). The forms of noble metal NPs and Au/Pt molar ratio have significant effects on the catalytic performance, and Au0.5Pt0.5/MnO2 has the highest catalytic activity among all the as-prepared metal NPs supported MnO2 catalysts, and the temperature for complete decomposition of HCHO reached as low as 313 K. The high catalytic activities of Au1- x Pt x /MnO2 catalysts resulted from the synergistic effect between Au1- x Pt x NPs and MnO2 nanostructure, as well as the synergistic effect between Au and Pt. The current Au1- x Pt x /MnO2 catalysts are among the first trials to apply bimetallic NP-supported catalysts to the decomposition of HCHO, and proved that the Au1- x Pt x /MnO2 catalysts are promising for indoor decomposition of formaldehyde due to their easy synthesis, low cost, and excellent catalytic performance.

  17. Pt, Au and Ag Electrodes on BiCuVOx

    DTIC Science & Technology

    2007-11-02

    the stabilized zirconia’s or t.%_*O ceria’s. In its behaviour many smilarities are found with the ,Electrolyte 0 doped-bismuth oxide /gold electrode...Aircraft Subsystem, Chemistry, Materials, oxygen pump, porous electrode, oxygen ion conductivity, 16. PRICE CODE oxide electrode N/A 17. SECURITY...electrodes is characterised by considerable hysteresis in the I-V curves. The observed behaviour can well be explained by the occurrance of a change

  18. Final Technical Report: First Principles Investigations for the Ensemble Effects of PdAu and PtAu Bimetallic Nanocatalysts

    SciTech Connect

    Ruqian Wu

    2012-05-18

    Bimetallic surfaces with tunable chemical properties have attracted broad attention in recent years due to their ample potential for heterogeneous catalysis applications. The local chemical properties of constituents are strongly altered from their parent metals by 'ligand effect', a term encompassing the influences of charge transfer, orbital rehybridization and lattice strain. In comparison to the aforementioned, the 'ensemble effect' associated with particular arrangements of the active constituents have received much less attention, despite their notable importance towards the determination of reactivity and selectivity of bimetallic catalysts. We performed theoretical studies for understanding the ensemble effects on bimetallic catalysis: (i) simulations for the formation of different ensembles on PdAu and PtAu nanoclusters; (ii) studies of the size, shape, and substrate dependence of their electronic properties; and (iii) simulations for model reactions such as CO oxidation, methanol, ethylene and water dehydrogenation on PdAu and PtAu nanoclusters. In close collaboration with leading experimental groups, our theoretical research elucidated the fundamentals of Au based bimetallic nanocatalysts.

  19. M atom (M = Cu, Ag and Au) interaction with Ag and Au substrates: a first-principles study using cluster and slab models.

    PubMed

    Nigam, Sandeep; Majumder, Chiranjib

    2010-11-03

    Using state-of-the-art first-principles calculations we report the interaction of M atoms (M = Cu, Ag and Au) with small Ag(n), Au(n) clusters (n = 3 and 6) and periodic Ag(111) and Au(111) surfaces. All calculations were performed using the plane wave pseudo-potential approach under the spin polarized version of the generalized gradient approximation scheme. The result shows that the equilibrium geometry of all MAg(3) and MAu(3) clusters favor a planar rhombus structure. From the charge distribution analysis of MAg(n)/MAu(n) clusters it is found that, while Cu and Ag donates electronic charge towards the host clusters, the Au atom acts as an acceptor, thus creating charge polarization in the system. The difference in orbital decomposed charges before and after the M interaction reveals that enhanced s-d hybridization is responsible for keeping the MAu(6) cluster planar, and increased p-orbital participation induces three-dimensional configurations in MAg(6) clusters. The optimization of M atom deposition on the Ag(111) and Au(111) surfaces shows that M atoms prefer to adsorb on the threefold fcc site over other well-defined sites. From the orbital decomposed charge analysis it is inferred that, although there is significant difference in the absolute magnitude of the interaction energy between M atoms and the Ag or Au substrates, the nature of chemical bonding is similar for the finite size clusters as well as in slab models.

  20. Regioselective Atomic Rearrangement of Ag-Pt Octahedral Catalysts by Chemical Vapor-Assisted Treatment.

    PubMed

    Pan, Yung-Tin; Yan, Linqing; Shao, Yu-Tsun; Zuo, Jian-Min; Yang, Hong

    2016-12-14

    Thermal annealing is a common, and often much-needed, process to optimize the surface structure and composition of bimetallic nanoparticles for high catalytic performance. Such thermal treatment is often carried out either in air or under an inert atmosphere by a trial-and-error approach. Herewith, we present a new chemical vapor-assisted treatment, which can preserve the octahedral morphology of Ag-Pt nanoparticles while modifying the surface into preferred composition arrangements with site-selectivity for high catalytic activity. In situ environmental transmission electron microscope (ETEM) study reveals a relatively homogeneous distribution of Ag and Pt is generated on the surface of Ag-Pt nanoparticles upon exposure to carbon monoxide (CO), whereas Pt atoms preferably segregate to the edge regions when the gas atmosphere is switched to argon. Density functional theory (DFT) calculations suggest stabilization of Pt atoms is energetically favored in the form of mixed surface alloys when CO vapor is present. Without CO, Ag and Pt phase separate under the similar mild treatment condition. There exists a close correlation between the tunable surface structures and the catalytic activities of Ag-Pt octahedral nanoparticles.

  1. FePt-Ag nanocomposite thin films with longitudinal magnetic anisotropy.

    PubMed

    Zhou, Y Z; Chen, J S; Chow, G M; Wang, J P

    2004-09-01

    A well-controlled method to fabricate FePt thin films with the (200) texture and longitudinal magnetic anisotropy for high-density magnetic recording media is reported. FePt-Ag nanocomposite thin films with L1(0) ordered FePt grains embedded in an Ag matrix were deposited on the Cr90Ru10/glass by co-sputtering from Ag and FePt targets. The Ag doping suppressed the (001) texture but improved the L1(0) FePt (200) texture. The magnetic easy axis of FePt-Ag thin films changed from perpendicular to longitudinal in direction. In-plane coercivity of the films varied from 0.8 kOe to 6.5 kOe, depending on Ag contents in the films and under-layer thickness. The change from the (001) to (200) texture could be due to the competition of grain-boundary energy and epitaxial-strain energy.

  2. Synthesis and characteristics of Ag/Pt bimetallic nanocomposites by arc-discharge solution plasma processing.

    PubMed

    Pootawang, Panuphong; Saito, Nagahiro; Takai, Osamu; Lee, Sang-Yul

    2012-10-05

    Arc discharge in solution, generated by applying a high voltage of unipolar pulsed dc to electrodes of Ag and Pt, was used as a method to form Ag/Pt bimetallic nanocomposites via electrode erosion by the effects of the electric arc at the cathode (Ag rod) and the sputtering at the anode (Pt rod). Ag/Pt bimetallic nanocomposites were formed as colloidal particles dispersed in solution via the reduction of hydrogen radicals generated during discharge without the addition of chemical precursor or reducing agent. At a discharge time of 30 s, the fine bimetallic nanoparticles with a mean particle size of approximately 5 nm were observed by transmission electron microscopy (TEM). With increasing discharge time, the bimetallic nanoparticle size tended to increase by forming an agglomeration. The presence of the relatively small amount of Pt dispersed in the Ag matrix could be observed by the analytical mapping mode of energy-dispersive x-ray spectroscopy and high-resolution TEM. This demonstrated that the synthesized particle was in the form of a nanocomposite. No contamination of other chemical substances was detected by x-ray photoelectron spectroscopy. Hence, solution plasma could be a clean and simple process to effectively synthesize Ag/Pt bimetallic nanocomposites and it is expected to be widely applicable in the preparation of several types of nanoparticle.

  3. Structural and Optical Properties of Discrete Dendritic Pt Nanoparticles on Colloidal Au Nanoprisms

    PubMed Central

    2016-01-01

    Catalytic and optical properties can be coupled by combining different metals into nanoscale architectures in which both the shape and the composition provide fine-tuning of functionality. Here, discrete, small Pt nanoparticles (diameter = 3–6 nm) were grown in linear arrays on Au nanoprisms, and the resulting structures are shown to retain strong localized surface plasmon resonances. Multidimensional electron microscopy and spectroscopy techniques (energy-dispersive X-ray spectroscopy, electron tomography, and electron energy-loss spectroscopy) were used to unravel their local composition, three-dimensional morphology, growth patterns, and optical properties. The composition and tomographic analyses disclose otherwise ambiguous details of the Pt-decorated Au nanoprisms, revealing that both pseudospherical protrusions and dendritic Pt nanoparticles grow on all faces of the nanoprisms (the faceted or occasionally twisted morphologies of which are also revealed), and shed light on the alignment of the Pt nanoparticles. The electron energy-loss spectroscopy investigations show that the Au nanoprisms support multiple localized surface plasmon resonances despite the presence of pendant Pt nanoparticles. The plasmonic fields at the surface of the nanoprisms indeed extend into the Pt nanoparticles, opening possibilities for combined optical and catalytic applications. These insights pave the way toward comprehensive nanoengineering of multifunctional bimetallic nanostructures, with potential applications in plasmon-enhanced catalysis and in situ monitoring of chemical processes via surface-enhanced spectroscopy. PMID:27688821

  4. Catalysis by Nanostructures: Methane, Ethylene Oxide, and Propylene Oxide Synthesis on Ag, Cu or Au Nanoclusters

    DTIC Science & Technology

    2008-02-07

    GRANT NUMBER Propylene Oxide Synthesis on Ag , Cu or Au nanoclusters F49620-01-1-0459 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Horia...Nanostructures: Methane, Ethylene Oxide, and Propylene Oxide Synthesis on Ag , Cu or Au nanoclusters, F49620-01-1-0459 Final Performance Report (for the period 07...andthe mobility of Ag clusters and Au clusters on TiO 2(1 10) have been published " . We found that Au atoms are very mobile and form large clusters at

  5. Kinetics of chemical ordering in a Ag-Pt nanoalloy particle via first-principles simulations

    NASA Astrophysics Data System (ADS)

    Negreiros, F. R.; Taherkhani, F.; Parsafar, G.; Caro, A.; Fortunelli, A.

    2012-11-01

    The energetics and kinetic energy barriers of vacancy/atom exchange in a 37-atom truncated octahedron Ag-Pt binary cluster in the Ag-rich range of compositions are investigated via a first-principles atomistic approach. The energy of the local minima obtained considering various distributions of a single vacancy and a few Pt atoms within the cluster and the energy barriers connecting them are evaluated using accurate density-functional calculations. The effects of the simultaneous presence of a vacancy and Pt atoms are found to be simply additive when their distances are larger than first-neighbors, whereas when they can be stabilizing at low Pt content due to the release of strain by the Pt/vacancy interaction or destabilizing close to a perfect Pt(core)/Ag(shell) arrangement. It is found that alloying with Pt appreciably increases the barriers for homotops transformations, thus rationalizing the issues encountered at the experimental level in producing Ag-Pt equilibrated nanoparticles and bulk phase diagram.

  6. Enhanced phase stabilization of CoPt in the presence of Ag

    NASA Astrophysics Data System (ADS)

    Sehdev, Neeru; Medwal, Rohit; Annapoorni, S.

    2011-08-01

    We report the synthesis of CoPt and CoPt-Ag nanoparticles by the simultaneous reduction of platinum(II) acetylacetonate (Pt(acac)2), cobalt(II)acetylacetonate (Co(acac)2), and silver nitrate (AgNO3) (for CoPt-Ag) in the presence of poly(N-vinyl-2-pyrrolidone) (PVP). Here the changes in the structural and magnetic properties of these nanoparticles subjected to heat treatment and the effect of adding silver to CoPt in comparison to pure CoPt have been investigated. TEM observations reveal a narrow size distribution with particle diameter of about 2-3 nm. The XRD studies reveal a disordered fcc phase for the as synthesized nanoparticles which after annealing at higher temperatures show peaks corresponding to an ordered L10 phase. The structural phase transition is also followed by enhanced magnetic properties. The magnetic measurements show the transition of a magnetically soft alloy to a magnetically hard material with a maximum coercivity of ˜1 T after annealing at 700 °C. The addition of silver (Ag) to CoPt alloy induces a reduction in the ordering temperature by 100 °C compared to pure CoPt, with an increased coercivity of 1.2 T. Such thermally stable and structurally ordered hard magnetic nanoparticles are promising candidates for magnetic storage applications.

  7. Effect of Au thickness on AuAg bimetallic growth on reconstructed Si(5 5 12) surfaces

    NASA Astrophysics Data System (ADS)

    Bhukta, Anjan; Ghosh, Arnab; Guha, Puspendu; Maiti, Paramita; Satpati, Biswarup; Satyam, Parlapalli Venkata

    2017-03-01

    Large, stable and single domain unit cell with row-like structures makes reconstructed Si(5 5 12) surface an important one-dimensional growth template of nanostructures. We report on the morphological aspects of the growth of AuAg bimetallic nanostructures on a reconstructed Si(5 5 12) surface that has been deposited with a 0.5 monolayer (ML) Ag and various Au thicknesses (0.5 to 5.0 ML) to determine the optimum gold thickness for a growth of high aspect ratio of AuAg nanostructures. The mean aspect ratio of AuAg nanostructures increases up to Au thickness of 3.0 ML and for larger thickness the mean aspect ratio decreases. The prior growth of 0.5 ML Ag on reconstructed surface result in the formation of one-dimensional Ag strips which are helping for preferential nucleation sites along Si< 1bar{1}0 rangle to form AuAg bimetallic long aspect ratio structures. Followed by these early processes of growth, for Au thickness >3.0 ML, excess Au ad-atoms begin to accumulate along Si< 66bar{5} rangle and consequences reduction of mean aspect ratio of bimetallic nanostructures. Nanostructures are grown using molecular beam epitaxy method under ultra-high vacuum conditions and in situ scanning tunneling microscopy has been used to investigate the morphological variations. Determination of structural aspects and compositional analysis has been carried out using Rutherford backscattering spectrometry and high-resolution (scanning) transmission electron microscopy methods.

  8. Role of Ag addition in L10 ordering of FePt-based nanocomposite magnets

    NASA Astrophysics Data System (ADS)

    Crisan, A. D.; Vasiliu, F.; Mercioniu, I.; Crisan, O.

    2014-01-01

    The FePt system has important perspectives as high-temperature corrosion-resistant magnets. In the form of rapidly solidified melt-spun ribbons, FePt-based magnets may exhibit in certain cases a two-phase hard-soft magnetic behaviour. The present paper deals with a microstructural and magnetic study of FePtAgB alloys with increasing Ag content. The aim is to identify and confirm the effect of Ag addition in decreasing the temperature of the FePt disorder-order structural phase transformation. A detailed high-resolution transmission electron microscopy study is employed, and the alternative disposal of hard and soft regions within the two-phase microstructure is observed and interpreted with respect to the X-ray diffraction results. In the as-cast Ag-containing samples, it is shown that there is an optimum of the Ag content for which best magnetic properties are obtained. Ag addition creates a nonlinear behaviour of the coercive field and the ordering parameter, similar to the RKKY interaction-induced interlayer exchange coupling (IEC) observed in magnetic layers separated by non-magnetic spacer layers. Direct formation of the L10 phase from the as-cast state in the FePtAgB alloys is reported with magnetic parameters compatible to other exchange spring permanent nanomagnets. These findings open novel perspectives into utilization of such alloys in applications requiring magnets operating in high-temperature industrial environments.

  9. Optimizing Au/Ag core-shell nanorods: purification, stability, and surface modification

    NASA Astrophysics Data System (ADS)

    Ma, Yanan; Zhou, Jun; Shu, Lei; Li, Tianhua; Petti, Lucia; Mormile, Pasquale

    2014-06-01

    The purification, stability, and surface modification of Au/Ag core-shell nanorods (Au/Ag NRs) in a biological buffer solution were systematically studied for the first time. In this study, Au/Ag NRs were synthesized by chemically reducing silver on the surface of gold nanorods using cetyltrimethylammonium bromide as surfactant and then purified by centrifugation washing. Based on the analysis of UV-Vis absorption spectra, TEM images, Raman spectra, and the ξ-potential, it was observed that after the second washing step, the Au/Ag NRs displayed good stability and high surface-enhanced Raman scattering (SERS) enhancement. When the as-prepared Au/Ag NRs were centrifuged more than twice, a structural transition in the surfactant layer was manifested with a sudden increase in the Raman signal intensities at 760 and 1,455 cm-1. Moreover, 4-mercaptobenzoic acid (4MBA) was used as a Raman reporter molecule to investigate the SERS characteristics of the purified Au/Ag NRs. The Raman signal intensity was enhanced with increasing the concentration of 4MBA and reached its highest intensity at the saturation concentration of 1.0 µM 4MBA in a 5 ml solution of the purified Au/Ag NRs. To prevent significant aggregation of the 4MBA-tagged Au/Ag NRs, a poly(styrenesulfonate) (PSS) layer was assembled on the nanorod surfaces by electrostatic adsorption for further surface modification, which made the 4MBA-tagged Au/Ag NRs suitable for the labeled biosensing. Subsequently, the characteristics of the PSS-coated Au/Ag NRs were demonstrated for the potential applications of label-free biosensing.

  10. AuPt Alloy Nanostructures with Tunable Composition and Enzyme-like Activities for Colorimetric Detection of Bisulfide

    NASA Astrophysics Data System (ADS)

    He, Weiwei; Han, Xiangna; Jia, Huimin; Cai, Junhui; Zhou, Yunlong; Zheng, Zhi

    2017-01-01

    Tuning the enzyme-like activity and studying the interaction between biologically relevant species and nano-enzymes may facilitate the applications of nanostructures in mimicking natural enzymes. In this work, AuPt alloy nanoparticles (NPs) with varying compositions were prepared through a facile method by co-reduction of Au3+ and Pt2+ in aqueous solutions. The composition could be tuned easily by adjusting the molar ratios of added Pt2+ to Au3+. It was found that both peroxidase-like and oxidase-like activity of AuPt alloy NPs were highly dependent on the alloy compositions, which thus suggesting an effective way to tailor their catalytic properties. By investigating the inhibitory effects of HS‑ on the enzyme-like activity of AuPt alloy NPs and natural enzyme, we have developed a method for colorimetric detection of HS‑ and evaluation of the inhibiting effects of inhibitors on natural and artificial enzymes. In addition, the responsive ability of this method was influenced largely by the composition: AuPt alloy NPs show much lower limit of detection for HS‑ than Pt NPs while Pt NPs show wider linear range than AuPt alloy NPs. This study suggests the facile way not only for synthesis of alloy nanostructures, but also for tuning their catalytic activities and for use in bioanalysis.

  11. AuPt Alloy Nanostructures with Tunable Composition and Enzyme-like Activities for Colorimetric Detection of Bisulfide

    PubMed Central

    He, Weiwei; Han, Xiangna; Jia, Huimin; Cai, Junhui; Zhou, Yunlong; Zheng, Zhi

    2017-01-01

    Tuning the enzyme-like activity and studying the interaction between biologically relevant species and nano-enzymes may facilitate the applications of nanostructures in mimicking natural enzymes. In this work, AuPt alloy nanoparticles (NPs) with varying compositions were prepared through a facile method by co-reduction of Au3+ and Pt2+ in aqueous solutions. The composition could be tuned easily by adjusting the molar ratios of added Pt2+ to Au3+. It was found that both peroxidase-like and oxidase-like activity of AuPt alloy NPs were highly dependent on the alloy compositions, which thus suggesting an effective way to tailor their catalytic properties. By investigating the inhibitory effects of HS− on the enzyme-like activity of AuPt alloy NPs and natural enzyme, we have developed a method for colorimetric detection of HS− and evaluation of the inhibiting effects of inhibitors on natural and artificial enzymes. In addition, the responsive ability of this method was influenced largely by the composition: AuPt alloy NPs show much lower limit of detection for HS− than Pt NPs while Pt NPs show wider linear range than AuPt alloy NPs. This study suggests the facile way not only for synthesis of alloy nanostructures, but also for tuning their catalytic activities and for use in bioanalysis. PMID:28051159

  12. Polymers effects on synthesis of AuNPs, and Au/Ag nanoalloys: indirectly generated AuNPs and versatile sensing applications including anti-leukemic agent.

    PubMed

    Jahan, Shanaz; Mansoor, Farrukh; Kanwal, Shamsa

    2014-03-15

    Polymers either serve as shielding or capping agents to restrict the nanoparticle size. This study demonstrates the polymer depositions and their effects in synthesis and sharp stabilization of gold nanoparticles (AuNPs) and to develop gold/silver nanoalloys (Au/Ag nanoalloys). Effects of different polymers are tested to justify their role in synthesis and stability of phloroglucinol (PG) coated AuNPs and Au/Ag nanoalloys. Cationic and anionic i.e. [Polydiallyldimethylammonium](+) (PDDA), [Polyethyleneimine](+) (PEI), [Polystyrene sulfonate](2-) (PSS) and neutral polymer Polychlorotriflouroethylene (PCTFE) produce praiseworthy stable AuNPs and Au/Ag nanoalloy. To prove polymer effects characterization protocols including UV-vis, Fluorescence (PL), IR and AFM imaging are performed to fully investigate the mechanism and size characteristics of these nanoparticles/nanoalloys. In this study sharp size controlling/sheilding effects were observed particularly with cationic polymers simply through the favorable electrostatic interactions with the terminal ends of PG Potent/significant detection of doxorubicin (DOX, an antileukemic agent) via fluorescence resonance energy transfer (FRET) between PEI shielded AuNPs (AuNPEI) and DOX was achieved upto 10 pM level, while PDDA protected AuNPs facilitated the detection of ascorbic acid based on fluorescence enhancement effects in wide range (10-200 nM) and with detection limit of 200 pM. Similarly sensing performance of PEI stabilized Au/Ag nanoalloys on addition of halides (Cl(-), Br(-), I(-)) is evaluated through red shifted SPR along with continuous increase in absorbance and also through AFM. Moreover the addition of halide ions also helped the regeneration of AuNPs by taking away silver from the Au/Ag nanoalloys enabling their detections upto subnanomolar levels.

  13. Formation of one-dimensional Ag-Au solid solution colloids with Au nanorods as seeds, their alloying mechanisms, and surface plasmon resonances.

    PubMed

    Guo, Tao; Tan, Yiwei

    2013-01-21

    In this work, one dimensional (1D) Ag-Au solid solution nanoalloys were synthesized by rapidly diffusing Ag into the preformed Au nanorod (AuNR) seeds at ambient temperature in aqueous solution. By varying the molar ratio of AgCl/AuNR (in gold atoms), two kinds of 1D Ag-Au alloy nanostructures with a narrow size distribution--AgAu nanowires and Ag(33)Au(67) nanorods--could be obtained in high yields when NaCl and polyvinylpyrrolidone (PVP) were used as an additive and capping reagent, respectively. Based on HRTEM imaging combined with a series of control experiments, it is conceivable that vacancy/defect-motivated interdiffusion of Ag and Au atoms coupled with oxidative etching is a crucial stage in the mechanism responsible for this room-temperature alloying process, and the subsequent conjugation of the fused Ag-Au alloyed nanostructures is associated with the formation of the AgAu nanowires. The resulting 1D Ag-Au nanoalloys form stable colloidal dispersions and show unique localized surface plasmon resonance (LSPR) peaks in the ensemble extinction spectra.

  14. Isolation and structural characterization of a silver-platinum nanocluster, Ag4Pt2(DMSA)4.

    PubMed

    Biltek, Scott R; Sen, Ayusman; Pedicini, Anthony F; Reber, Arthur C; Khanna, Shiv N

    2014-09-18

    We report the synthesis, isolation, and characterization of the ligand-protected bimetallic cluster, Ag4Pt2(DMSA)4 (DMSA = meso-2,3,-dimercaptosuccinic acid). The procedure is similar to the one employed for the synthesis of Ag4Ni2(DMSA)4. Theoretical studies suggest that the Pt and Ni atoms have square planar configurations. Because the crystal field splitting of 5d orbitals is typically larger than that for 3d orbitals, the Pt-based cluster has an optical spectrum that is significantly blue-shifted as compared to the Ni-based cluster.

  15. Bimetallic PtAu superlattice arrays: Highly electroactive and durable catalyst for oxygen reduction and methanol oxidation reactions

    NASA Astrophysics Data System (ADS)

    Feng, Jiu-Ju; He, Li-Li; Fang, Rui; Wang, Qiao-Li; Yuan, Junhua; Wang, Ai-Jun

    2016-10-01

    Superlattice arrays, an important type of nanomaterials, have wide applications in catalysis, optic/electronics and energy storage for the synergetic effects determined by both individual metals and collective interactions. Herein, a simple one-pot solvothermal coreduction approach is developed for facile preparation of bimetallic PtAu alloyed superlattice arrays (PtAu SLAs) in oleylamine, with the assistance of urea via hydrogen bonding induced self-assembly. Urea is essential in morphology-controlled process and prevents PtAu nanoparticles from the disordered aggregation. The characterization and formation mechanism of PtAu SLAs are investigated in details. The as-synthesized hybrid nanocrystals exhibit enhanced electrocatalytic performances for oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in alkaline electrolyte in comparison with commercial Pt-C (50%, wt.%) and Pt black catalysts.

  16. Multiple magnetic transitions in Ag-substituted DyPt2

    NASA Astrophysics Data System (ADS)

    Arora, Parul; Chattopadhyay, M. K.; Sharath Chandra, L. S.; Sharma, V. K.; Roy, S. B.

    2012-08-01

    We show that the partial substitution of Ag in place of Pt in the cubic Laves phase ferromagnetic (below 9.2 K) compound DyPt2 leads to multiple temperature and field induced magnetic phase transitions. We study these phase transitions in details in a Dy(Pt0.94Ag0.06)2 alloy with the help of magnetization and specific heat measurements. One of the magnetic transitions produces an unusually sharp peak in the temperature dependence of heat capacity of Dy(Pt0.94Ag0.06)2, which is not observed in either of the parent compounds DyPt2 or DyAg2. The shape of this peak resembles those observed in the temperature dependence of heat capacity of the rare earth elements and some rare-earth based alloys and compounds across first order magnetic transitions accompanied by magneto-elastic effects and structural changes. The magnetic properties of Dy(Pt0.94Ag0.06)2 are analyzed in terms of the enhancement of crystal field effect and quadrupolar interactions. Large magneto-elastic coupling resulting from these interactions and changes in the electronic density of states near Fermi level because of the chemical substitution seem to introduce into the system the temperature and field induced multiple magnetic phase transitions mentioned above.

  17. Surface Plasmon Enhanced Photocatalysis of Au/Pt-decorated TiO2 Nanopillar Arrays

    PubMed Central

    Shuang, Shuang; Lv, Ruitao; Xie, Zheng; Zhang, Zhengjun

    2016-01-01

    The low quantum yields and lack of visible light utilization hinder the practical application of TiO2 in high-performance photocatalysis. Herein, we present a design of TiO2 nanopillar arrays (NPAs) decorated with both Au and Pt nanoparticles (NPs) directly synthesized through successive ion layer adsorption and reaction (SILAR) at room temperature. Au/Pt NPs with sizes of ~4 nm are well-dispersed on the TiO2 NPAs as evidenced by electron microscopic analyses. The present design of Au/Pt co-decoration on the TiO2 NPAs shows much higher visible and ultraviolet (UV) light absorption response, which leads to remarkably enhanced photocatalytic activities on both the dye degradation and photoelectrochemical (PEC) performance. Its photocatalytic reaction efficiency is 21 and 13 times higher than that of pure TiO2 sample under UV-vis and visible light, respectively. This great enhancement can be attributed to the synergy of electron-sink function of Pt and surface plasmon resonance (SPR) of Au NPs, which significantly improves charge separation of photoexcited TiO2. Our studies demonstrate that through rational design of composite nanostructures one can harvest visible light through the SPR effect to enhance the photocatalytic activities initiated by UV-light, and thus realize more effectively utilization of the whole solar spectrum for energy conversion. PMID:27215703

  18. Green synthesis of noble nanometals (Au, Pt, Pd) using glycerol under microwave irradiation conditions

    EPA Science Inventory

    A newer application of glycerol in the field of nanomaterials synthesis has been developed from both the economic and environmental points of view. Glycerol can act as a reducing agent for the fabrication of noble nanometals, such as Au, Pt, and Pd, under microwave irradiation. T...

  19. Improved Pt /Au and W /Pt/Au Schottky contacts on n-type ZnO using ozone cleaning

    NASA Astrophysics Data System (ADS)

    Ip, K.; Gila, B. P.; Onstine, A. H.; Lambers, E. S.; Heo, Y. W.; Baik, K. H.; Norton, D. P.; Pearton, S. J.; Kim, S.; LaRoche, J. R.; Ren, F.

    2004-06-01

    UV-ozone cleaning prior to metal deposition of either e-beam Pt contacts or sputtered W contacts on n-type single-crystal ZnO is found to significantly improve their rectifying characteristics. Pt contacts deposited directly on the as-received ZnO surface are Ohmic but show rectifying behavior with ozone cleaning. The Schottky barrier height of these Pt contacts was 0.70eV, with ideality factor of 1.5 and a saturation current density of 6.2×10-6Acm-2. In contrast, the as-deposited W contacts are Ohmic, independent of the use of ozone cleaning. Postdeposition annealing at 700°C produces rectifying behavior with Schottky barrier heights of 0.45eV for control samples and 0.49eV for those cleaned with ozone exposure. The improvement in rectifying properties of both the Pt and W contacts is related to removal of surface carbon contamination from the ZnO.

  20. Oxygen reduction kinetics on Pt monolayer shell highly affected by the structure of bimetallic AuNi cores

    SciTech Connect

    Chen, Guangyu; Kuttiyiel, Kurian A.; Su, Dong; Li, Meng; Wang, Chiu -Hui; Buceta, David; Du, Chunyu; Gao, Yunzhi; Yin, Geping; Sasaki, Kotaro; Vukmirovic, Miomir B.; Adzic, Radoslav R.

    2016-07-12

    Here, we describe pronounced effects of structural changes of the AuNi cores on the oxygen reduction reaction (ORR) activity of a Pt monolayer shell. The study of alloyed AuNi nanoparticles compared with AuNi core–shell structured nanoparticles revealed configurations having different electronic and electrochemical properties. Controlled alloying of Au with Ni was essential to tune the electronic properties of Au interacting with the Pt monolayer shell to achieve suitable adsorption of O2 on Pt for expediting the ORR. The alloyed AuNi nanoparticles made the Pt shell more catalytically active for the ORR than the core–shell structured AuNi nanoparticles. The Pt monolayer supported on the alloyed AuNi nanoparticles showed the Pt mass and specific activities as high as 1.52 A mg–1 and 1.18 mA cm–2, respectively, with almost no loss over 5 000 cycles of stability test. This high ORR activity is ascribed to the role of nonspecific steric configuration of Ni atoms changing the electronic properties of the alloy that affect the oxygen and water interaction with the Pt shell and facilitate increased ORR kinetics.

  1. Oxygen reduction kinetics on Pt monolayer shell highly affected by the structure of bimetallic AuNi cores

    DOE PAGES

    Chen, Guangyu; Kuttiyiel, Kurian A.; Su, Dong; ...

    2016-07-12

    Here, we describe pronounced effects of structural changes of the AuNi cores on the oxygen reduction reaction (ORR) activity of a Pt monolayer shell. The study of alloyed AuNi nanoparticles compared with AuNi core–shell structured nanoparticles revealed configurations having different electronic and electrochemical properties. Controlled alloying of Au with Ni was essential to tune the electronic properties of Au interacting with the Pt monolayer shell to achieve suitable adsorption of O2 on Pt for expediting the ORR. The alloyed AuNi nanoparticles made the Pt shell more catalytically active for the ORR than the core–shell structured AuNi nanoparticles. The Pt monolayermore » supported on the alloyed AuNi nanoparticles showed the Pt mass and specific activities as high as 1.52 A mg–1 and 1.18 mA cm–2, respectively, with almost no loss over 5 000 cycles of stability test. This high ORR activity is ascribed to the role of nonspecific steric configuration of Ni atoms changing the electronic properties of the alloy that affect the oxygen and water interaction with the Pt shell and facilitate increased ORR kinetics.« less

  2. Label free detection of DNA on Au/ZnO/Ag hybrid structure based SERS substrate

    NASA Astrophysics Data System (ADS)

    Pal, Anil Kumar; Mohan, D. Bharathi

    2016-04-01

    Au/ZnO/Ag based SERS substrate was fabricated for the label free detection of DNA of Escherichia Coli bacteria. The SERS substrate was fabricated by growing ZnO nanorod arrays on thermally evaporated ultrathin Ag film of 5 nm thickness using hydrothermal process. Non-spherical like Au nanoparticles were decorated on ZnO nanorod arrays by sputtering technique with sputtering time of 45 sec. The surface of Au/ZnO/Ag was observed to be nearly superhydrophobic exhibiting the contact angle of 144 °. A low volume (5 µl) of aqueous solution of DNA of laboratory strain Escherichia Coli with very low concentration was adsorbed on fabricated SERS substrate by drop casting. The SERS detection of DNA molecules was achieved up to lower concentration of 10-8 M due to strong local electric field enhancement at the nanometer gap among Au nanoparticles and superhydrophobic nature of Au/ZnO/Ag surface.

  3. Structure and electronic behavior of 26-atom Cu-Ag and Cu-Au nanoalloys

    NASA Astrophysics Data System (ADS)

    Guzmán-Ramírez, Gregorio; Robles, Juvencio; Aguilera-Granja, Faustino

    2016-09-01

    We hereby present a density functional theory (DFT) study of the structural, energetic, and electronic properties of the binary clusters Cu n X26- n (with X = Ag and Au). Our electronic calculations were performed with the DFT package GAUSSIAN 09, and we chose the BPW91 exchange correlation functional in combination with an effective core potential LANL2DZ basis set as our level of theory. We find that in the case of these clusters and in a completely different way - as compared to the bulk chemical order observed in both alloys CuAg (segregation) and CuAu (ordering) -, for small n both Ag and Au clusters exhibit a similar chemical order, finding the Cu atoms in the center of the cluster with the tendency to form core shell structures. On the other hand, for large n values the Ag and Au atoms tend to occupy surface positions forming separated surface islands that keep the two metal atoms separated as long as the concentration allows it. Concerning the structural properties, a clear increase in the interatomic distance of the Ag-Ag and Au-Au surface pairs is observed, particularly in the equiatomic region. In conclusion, both nanoalloys CuAg and CuAu behave quite similarly in contrast to their respective bulk cases.

  4. Nanoporous bimetallic Pt-Au alloy nanocomposites with superior catalytic activity towards electro-oxidation of methanol and formic acid

    NASA Astrophysics Data System (ADS)

    Zhang, Zhonghua; Wang, Yan; Wang, Xiaoguang

    2011-04-01

    We present a facile route to fabricate novel nanoporous bimetallic Pt-Au alloy nanocomposites by dealloying a rapidly solidified Al75Pt15Au10 precursor under free corrosion conditions. The microstructure of the precursor and the as-dealloyed sample was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, and energy dispersive X-ray (EDX) analysis. The Al75Pt15Au10 precursor is composed of a single-phase Al2(Au,Pt) intermetallic compound, and can be fully dealloyed in a 20 wt.% NaOH or 5 wt.% HCl aqueous solution. The dealloying leads to the formation of the nanoporous Pt60Au40 nanocomposites (np-Pt60Au40 NCs) with an fcc structure. The morphology, size and crystal orientation of grains in the precursor can be conserved in the resultant nanoporous alloy. The np-Pt60Au40 NCs consist of two zones with distinct ligament/channel sizes and compositions. The formation mechanism of these np-Pt60Au40 NCs can be rationalized based upon surface diffusion of more noble elements and spinodal decomposition during dealloying. Electrochemical measurements demonstrate that the np-Pt60Au40 NCs show superior catalytic activity towards the electro-oxidation of methanol and formic acid in the acid media compared to the commercial JM-Pt/C catalyst. This material can find potential applications in catalysis related areas, such as direct methanol or formic acidfuelcells. Our findings demonstrate that dealloying is an effective and simple strategy to realize the alloying of immiscible systems under mild conditions, and to fabricate novel nanostructures with superior performance.We present a facile route to fabricate novel nanoporous bimetallic Pt-Au alloy nanocomposites by dealloying a rapidly solidified Al75Pt15Au10 precursor under free corrosion conditions. The microstructure of the precursor and the as-dealloyed sample was characterized using X-ray diffraction, scanning electron

  5. Nanoporous bimetallic Pt-Au alloy nanocomposites with superior catalytic activity towards electro-oxidation of methanol and formic acid.

    PubMed

    Zhang, Zhonghua; Wang, Yan; Wang, Xiaoguang

    2011-04-01

    We present a facile route to fabricate novel nanoporous bimetallic Pt-Au alloy nanocomposites by dealloying a rapidly solidified Al(75)Pt(15)Au(10) precursor under free corrosion conditions. The microstructure of the precursor and the as-dealloyed sample was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, and energy dispersive X-ray (EDX) analysis. The Al(75)Pt(15)Au(10) precursor is composed of a single-phase Al(2)(Au,Pt) intermetallic compound, and can be fully dealloyed in a 20 wt.% NaOH or 5 wt.% HCl aqueous solution. The dealloying leads to the formation of the nanoporous Pt(60)Au(40) nanocomposites (np-Pt(60)Au(40) NCs) with an fcc structure. The morphology, size and crystal orientation of grains in the precursor can be conserved in the resultant nanoporous alloy. The np-Pt(60)Au(40) NCs consist of two zones with distinct ligament/channel sizes and compositions. The formation mechanism of these np-Pt(60)Au(40) NCs can be rationalized based upon surface diffusion of more noble elements and spinodal decomposition during dealloying. Electrochemical measurements demonstrate that the np-Pt(60)Au(40) NCs show superior catalytic activity towards the electro-oxidation of methanol and formic acid in the acid media compared to the commercial JM-Pt/C catalyst. This material can find potential applications in catalysis related areas, such as direct methanol or formic acid fuel cells. Our findings demonstrate that dealloying is an effective and simple strategy to realize the alloying of immiscible systems under mild conditions, and to fabricate novel nanostructures with superior performance.

  6. Fabrication of Porous Ag/TiO2/Au Coatings with Excellent Multipactor Suppression.

    PubMed

    Wu, Duoduo; Ma, Jianzhong; Bao, Yan; Cui, Wanzhao; Hu, Tiancun; Yang, Jing; Bai, Yuanrui

    2017-03-10

    Porous Ag/TiO2/Au coatings with excellent multipactor suppression were prepared by fabrication of porous Ag surface through two-step wet chemical etching, synthesis of TiO2 coatings by electroless-plating-like solution deposition and deposition of Au coatings via electroless plating. Porous structure of Ag surface, TiO2 coatings on porous Ag surface and Au coatings on porous Ag/TiO2 surface were verified by field-emission scanning electron microscopy, the composition and crystal type of TiO2 coatings was characterized by X-ray photoelectron spectroscopy and X-ray diffraction. Secondary electron yield (SEY) measurement was used to monitor the SEY coefficient of the porous Ag coatings and Ag/TiO2/Au coatings. The as-obtained porous Ag coatings were proved exhibiting low SEY below 1.2, and the process was highly reproducible. In addition, the porous Ag/TiO2/Au coatings showed excellent multipactor suppression with the SEY 1.23 and good environmental stability. It is worth mentioning that the whole preparation process is simple and feasible, which would provide a promising application in RF devices.

  7. Fabrication of Porous Ag/TiO2/Au Coatings with Excellent Multipactor Suppression

    NASA Astrophysics Data System (ADS)

    Wu, Duoduo; Ma, Jianzhong; Bao, Yan; Cui, Wanzhao; Hu, Tiancun; Yang, Jing; Bai, Yuanrui

    2017-03-01

    Porous Ag/TiO2/Au coatings with excellent multipactor suppression were prepared by fabrication of porous Ag surface through two-step wet chemical etching, synthesis of TiO2 coatings by electroless-plating-like solution deposition and deposition of Au coatings via electroless plating. Porous structure of Ag surface, TiO2 coatings on porous Ag surface and Au coatings on porous Ag/TiO2 surface were verified by field-emission scanning electron microscopy, the composition and crystal type of TiO2 coatings was characterized by X-ray photoelectron spectroscopy and X-ray diffraction. Secondary electron yield (SEY) measurement was used to monitor the SEY coefficient of the porous Ag coatings and Ag/TiO2/Au coatings. The as-obtained porous Ag coatings were proved exhibiting low SEY below 1.2, and the process was highly reproducible. In addition, the porous Ag/TiO2/Au coatings showed excellent multipactor suppression with the SEY 1.23 and good environmental stability. It is worth mentioning that the whole preparation process is simple and feasible, which would provide a promising application in RF devices.

  8. Fabrication of Porous Ag/TiO2/Au Coatings with Excellent Multipactor Suppression

    PubMed Central

    Wu, Duoduo; Ma, Jianzhong; Bao, Yan; Cui, Wanzhao; Hu, Tiancun; Yang, Jing; Bai, Yuanrui

    2017-01-01

    Porous Ag/TiO2/Au coatings with excellent multipactor suppression were prepared by fabrication of porous Ag surface through two-step wet chemical etching, synthesis of TiO2 coatings by electroless-plating-like solution deposition and deposition of Au coatings via electroless plating. Porous structure of Ag surface, TiO2 coatings on porous Ag surface and Au coatings on porous Ag/TiO2 surface were verified by field-emission scanning electron microscopy, the composition and crystal type of TiO2 coatings was characterized by X-ray photoelectron spectroscopy and X-ray diffraction. Secondary electron yield (SEY) measurement was used to monitor the SEY coefficient of the porous Ag coatings and Ag/TiO2/Au coatings. The as-obtained porous Ag coatings were proved exhibiting low SEY below 1.2, and the process was highly reproducible. In addition, the porous Ag/TiO2/Au coatings showed excellent multipactor suppression with the SEY 1.23 and good environmental stability. It is worth mentioning that the whole preparation process is simple and feasible, which would provide a promising application in RF devices. PMID:28281546

  9. Comparative study of the alloying effect on the initial oxidation of Cu-Au(100) and Cu-Pt(100)

    SciTech Connect

    Luo, Langli; Zhou, Guangwen; Kang, Yihong; Yang, Judith C.; Su, Dong; Stach, Eric A.

    2014-03-24

    Using in situ transmission electron microscopy, we show that the oxidation of the Cu-Au(100) results in the formation of Cu{sub 2}O islands that deeply embed into the Cu-Au substrate while the oxidation of the Cu-Pt(100) leads to the formation of Cu{sub 2}O islands that highly protrude above the Cu-Pt substrate. Their difference is attributed to the different mobilities of Pt and Au in the Cu base alloys for which the sluggish mobility of Pt in Cu results in trapped Pt atoms at the oxide/alloy interface while the faster mobility of Au in Cu leads to enhanced rehomogenization of the alloy composition.

  10. Preparation and Catalytic Activity for Aerobic Glucose Oxidation of Crown Jewel Structured Pt/Au Bimetallic Nanoclusters

    PubMed Central

    Zhang, Haijun; Wang, Liqiong; Lu, Lilin; Toshima, Naoki

    2016-01-01

    Understanding of the “structure-activity” relations for catalysts at an atomic level has been regarded as one of the most important objectives in catalysis studies. Bimetallic nanoclusters (NCs) in its many types, such as core/shell, random alloy, cluster-in-cluster, bi-hemisphere, and crown jewel (one kind of atom locating at the top position of another kind of NC), attract significant attention owing to their excellent optical, electronic, and catalytic properties. PVP-protected crown jewel-structured Pt/Au (CJ-Pt/Au) bimetallic nanoclusters (BNCs) with Au atoms located at active top sites were synthesized via a replacement reaction using 1.4-nm Pt NCs as mother clusters even considering the fact that the replacement reaction between Pt and Au3+ ions is difficult to be occurred. The prepared CJ-Pt/Au colloidal catalysts characterized by UV-Vis, TEM, HR-TEM and HAADF-STEM-EELS showed a high catalytic activity for aerobic glucose oxidation, and the top Au atoms decorating the Pt NCs were about 15 times more active than the Au atoms of Au NCs with similar particle size. PMID:27476577

  11. Preparation and Catalytic Activity for Aerobic Glucose Oxidation of Crown Jewel Structured Pt/Au Bimetallic Nanoclusters.

    PubMed

    Zhang, Haijun; Wang, Liqiong; Lu, Lilin; Toshima, Naoki

    2016-08-01

    Understanding of the "structure-activity" relations for catalysts at an atomic level has been regarded as one of the most important objectives in catalysis studies. Bimetallic nanoclusters (NCs) in its many types, such as core/shell, random alloy, cluster-in-cluster, bi-hemisphere, and crown jewel (one kind of atom locating at the top position of another kind of NC), attract significant attention owing to their excellent optical, electronic, and catalytic properties. PVP-protected crown jewel-structured Pt/Au (CJ-Pt/Au) bimetallic nanoclusters (BNCs) with Au atoms located at active top sites were synthesized via a replacement reaction using 1.4-nm Pt NCs as mother clusters even considering the fact that the replacement reaction between Pt and Au(3+) ions is difficult to be occurred. The prepared CJ-Pt/Au colloidal catalysts characterized by UV-Vis, TEM, HR-TEM and HAADF-STEM-EELS showed a high catalytic activity for aerobic glucose oxidation, and the top Au atoms decorating the Pt NCs were about 15 times more active than the Au atoms of Au NCs with similar particle size.

  12. Preparation and Catalytic Activity for Aerobic Glucose Oxidation of Crown Jewel Structured Pt/Au Bimetallic Nanoclusters

    NASA Astrophysics Data System (ADS)

    Zhang, Haijun; Wang, Liqiong; Lu, Lilin; Toshima, Naoki

    2016-08-01

    Understanding of the “structure-activity” relations for catalysts at an atomic level has been regarded as one of the most important objectives in catalysis studies. Bimetallic nanoclusters (NCs) in its many types, such as core/shell, random alloy, cluster-in-cluster, bi-hemisphere, and crown jewel (one kind of atom locating at the top position of another kind of NC), attract significant attention owing to their excellent optical, electronic, and catalytic properties. PVP-protected crown jewel-structured Pt/Au (CJ-Pt/Au) bimetallic nanoclusters (BNCs) with Au atoms located at active top sites were synthesized via a replacement reaction using 1.4-nm Pt NCs as mother clusters even considering the fact that the replacement reaction between Pt and Au3+ ions is difficult to be occurred. The prepared CJ-Pt/Au colloidal catalysts characterized by UV-Vis, TEM, HR-TEM and HAADF-STEM-EELS showed a high catalytic activity for aerobic glucose oxidation, and the top Au atoms decorating the Pt NCs were about 15 times more active than the Au atoms of Au NCs with similar particle size.

  13. SERS activity studies of Ag/Au bimetallic films prepared by galvanic replacement.

    PubMed

    Wang, Chaonan; Fang, Jinghuai; Jin, Yonglong

    2012-10-01

    Ag films on Si substrates were fabricated by immersion plating, which served as sacrificial materials for preparation of Ag/Au bimetallic films by galvanic replacement method. SEM images displayed that the sacrificial Ag films presenting island morphology experienced interesting structural evolution process during galvanic replacement reaction, and nano-scaled holes were formed in the resultant bimetallic films. SERS measurements using crystal violet as an analyte showed that SERS intensities of bimetallic films were enhanced significantly compared with that of pure Ag films and related mechanisms were discussed. Immersion plating experiment carried out on Ag films on PEN substrates fabricated by photoinduced reduction method further confirmed that galvanic replacement is an easy method to fabricate Ag/Au bimetallic and a potential approach to improve the SERS performance of Ag films.

  14. Studies on plasmon characteristics and the local density of states of Au and Ag based nanoparticles

    NASA Astrophysics Data System (ADS)

    Vinod, M.; Biju, V.; Gopchandran, K. G.

    2016-01-01

    Knowledge about the conductive properties and the local density of states of chemically pure Au, Ag, Ag@Au core-shell and Au-Ag bimetallic nanoparticles is technologically important. Herein, the I-V characteristics and the density of states derived from scanning tunneling microscopy measurements made under atmospheric conditions is reported. The nanoparticles in thin film form used in this study were prepared by laser ablation in water followed by drop and evaporation. The morphology of the surface of the nanostructures was observed from optimizing tunneling current in each case. The monometallic Au and Ag particles shows almost similar current characteristics as well as discrete energy states but the slope of I-V characteristics was different for bimetallic structures. An attempt has also been made to compare the current measurements done in the nanoscale with the surface plasmon characteristics.

  15. A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

    NASA Astrophysics Data System (ADS)

    Zhang, Li; Wang, Cong; Zhang, Yi

    2012-05-01

    A facile strategy has been developed for the preparation of bimetallic gold-silver (Au-Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)-silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI-Ag/Au}n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV-vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV-vis characteristic absorbances of {PEI-Ag/Au}n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core-shell structures in the TEM images confirm the formation of bimetallic Au-Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20-25 nm. The resulting {PEI-Ag/Au}n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI-Ag/Au}n films are more attractive compared to {PEI-Ag/PSS}n and {PEI/Au}n films.

  16. The unusual effect of AgNO3 on the growth of Au nanostructures and their catalytic performance.

    PubMed

    Li, Xingliang; Yang, Yun; Zhou, Guangju; Han, Shuhua; Wang, Wenfang; Zhang, Lijie; Chen, Wei; Zou, Chao; Huang, Shaoming

    2013-06-07

    Au nanostructures attract much attention due to their potential applications in many fields. The controlled synthesis is critical to their properties modulation and applications. AgNO3-assisted synthesis is a widely used method for controllably preparing Au nanostructures in aqueous system. Herein, the effect of AgNO3 on the growth of Au nanostructures in polyol is studied. We observe an unusual effect that AgNO3 can induce the formation of pentatwinned Au nanostructures (nanorods and decahedra) and block the growth of Au nanorods. More interestingly, this blocking effect can be tuned through controlling the amount of AgNO3. A moderate amount of AgNO3 facilitates the formation of Au nanorods. A large amount of AgNO3 completely blocks the growth of nanorods and favors the formation of high quality decahedra (decahedra can be considered as nanorods with 0 nm longitudinal length). Besides, this blocking effect also allows preparation of different high-index-faceted Au nanobipyramids. These prepared Au nanostructures further serve as starting templates to fabricate other heterostructured Au/Ag nanomaterials, such as Ag-Au-Ag segmental nanorods, Au@Ag core-shelled nanostructures. The prepared nanostructures exhibit size- and structure-dependent catalytic performance in the reduction of p-nitrophenol to p-aminophenol by sodium borohydride.

  17. Core-shell Au@Pd nanoparticles with enhanced catalytic activity for oxygen reduction reaction via core-shell Au@Ag/Pd constructions

    PubMed Central

    Chen, Dong; Li, Chengyin; Liu, Hui; Ye, Feng; Yang, Jun

    2015-01-01

    Core-shell nanoparticles often exhibit improved catalytic properties due to the lattice strain created in these core-shell particles. Herein, we demonstrate the synthesis of core-shell Au@Pd nanoparticles from their core-shell Au@Ag/Pd parents. This strategy begins with the preparation of core-shell Au@Ag nanoparticles in an organic solvent. Then, the pure Ag shells are converted into the shells made of Ag/Pd alloy by galvanic replacement reaction between the Ag shells and Pd2+ precursors. Subsequently, the Ag component is removed from the alloy shell using saturated NaCl solution to form core-shell Au@Pd nanoparticles with an Au core and a Pd shell. In comparison with the core-shell Au@Pd nanoparticles upon directly depositing Pd shell on the Au seeds and commercial Pd/C catalysts, the core-shell Au@Pd nanoparticles via their core-shell Au@Ag/Pd templates display superior activity and durability in catalyzing oxygen reduction reaction, mainly due to the larger lattice tensile effect in Pd shell induced by the Au core and Ag removal. PMID:26144550

  18. Epitaxial Growth of Twinned Au-Pt Core-Shell Star-Shaped Decahedra as Highly Durable Electrocatalysts.

    PubMed

    Bian, Ting; Zhang, Hui; Jiang, Yingying; Jin, Chuanhong; Wu, Jianbo; Yang, Hong; Yang, Deren

    2015-12-09

    Pt epitaxial layer on a nanoparticle with twinned structure and well-defined shape is highly desirable in order to achieve high performance in both catalytic activity and durability toward oxygen reduction reaction (ORR). However, it remains tremendously challenging to produce conformal, heterogeneous, twinned nanostructures due to the high internal strain and surface energy of Pt. In addition, these twinned nanostructures may be subject to degradation in highly corrosive ORR environments due to the high energy of twin boundary. Here we report the synthesis of Au-Pt core-shell star-shaped decahedra bounded mainly by {111} facets, in which Pt shells with controlled thickness epitaxially grew on Au cores with a 5-fold twinned structure. The incorporation of the amine group decreases the surface energy of Pt by strong adsorption and thus facilitates the epitaxial growth of Pt on Au core instead of the dendritic growth. In addition, Br(-) ion could largely stabilize the {111} facets of Pt, which prevent the formation of spherical nanoparticles. The Au-Pt core-shell decahedra with thicker Pt shell exhibited enhanced ORR properties in terms of activity and durability. Specifically, AuPt1.03 star-shaped decahedra achieved the highest mass activity (0.94 mA/μg(Pt)) and area activity (1.09 mA/cm(2)(Pt)), which is ∼6.7 and 5 times, respectively, as high as those of the commercial Pt/C (ETEK). Significantly, such star-shaped decahedra were highly stable with ∼10% loss in area activity and ∼20% loss in mass activity after 30,000 CV cycles in O2 saturated acid solution.

  19. Effects of Ru and Ag cap layers on microstructure and magnetic properties of FePt ultrathin films.

    PubMed

    Liu, Mingfeng; Jin, Tianli; Hao, Liang; Cao, Jiangwei; Wang, Ying; Wu, Dongping; Bai, Jianmin; Wei, Fulin

    2015-01-01

    The effects of Ru and Ag cap layers on the microstructure and magnetic properties of the FePt ultrathin films have been investigated. The results indicate that i) The Ag cap layer segregates from the FePt/Ag bilayer, lowers the FePt ordering temperature, promotes the FePt thin films to form island structure, and enhances the coercivity; ii) The Ru cap layer increases the FePt ordering temperature, helps to maintain smooth continuous structure film, and restrains the FePt (001) orientation and perpendicular magnetic anisotropy (PMA). The effects become more pronounced for the 3-nm-thick FePt thin films. The effects can be mainly attributed to the different melting point and thermal expansion stress between the cap layer and FePt thin films.

  20. Effects of Ru and Ag cap layers on microstructure and magnetic properties of FePt ultrathin films

    NASA Astrophysics Data System (ADS)

    Liu, Mingfeng; Jin, Tianli; Hao, Liang; Cao, Jiangwei; Wang, Ying; Wu, Dongping; Bai, Jianmin; Wei, Fulin

    2015-04-01

    The effects of Ru and Ag cap layers on the microstructure and magnetic properties of the FePt ultrathin films have been investigated. The results indicate that i) The Ag cap layer segregates from the FePt/Ag bilayer, lowers the FePt ordering temperature, promotes the FePt thin films to form island structure, and enhances the coercivity; ii) The Ru cap layer increases the FePt ordering temperature, helps to maintain smooth continuous structure film, and restrains the FePt (001) orientation and perpendicular magnetic anisotropy (PMA). The effects become more pronounced for the 3-nm-thick FePt thin films. The effects can be mainly attributed to the different melting point and thermal expansion stress between the cap layer and FePt thin films.

  1. Templated Atom-Precise Galvanic Synthesis and Structure Elucidation of a [Ag24Au(SR)18](-) Nanocluster.

    PubMed

    Bootharaju, Megalamane S; Joshi, Chakra P; Parida, Manas R; Mohammed, Omar F; Bakr, Osman M

    2016-01-18

    Synthesis of atom-precise alloy nanoclusters with uniform composition is challenging when the alloying atoms are similar in size (for example, Ag and Au). A galvanic exchange strategy has been devised to produce a compositionally uniform [Ag24Au(SR)18](-) cluster (SR: thiolate) using a pure [Ag25(SR)18](-) cluster as a template. Conversely, the direct synthesis of Ag24Au cluster leads to a mixture of [Ag(25-x)Au(x)(SR)18](-), x=1-8. Mass spectrometry and crystallography of [Ag24Au(SR)18](-) reveal the presence of the Au heteroatom at the Ag25 center, forming Ag24Au. The successful exchange of the central Ag of Ag25 with Au causes perturbations in the Ag25 crystal structure, which are reflected in the absorption, luminescence, and ambient stability of the particle. These properties are compared with those of Ag25 and Ag24Pd clusters with same ligand and structural framework, providing new insights into the modulation of cluster properties with dopants at the single-atom level.

  2. Disinfection of water using Pt- and Ag-doped TiO2 photocatalysts.

    PubMed

    Suri, Rominder P S; Thornton, Hilary M; Muruganandham, M

    2012-01-01

    In this article we have reported heterogeneous photocatalytic disinfection using pristine and Ag- and Pt-doped nano TiO2 under near-UV light and solar light irradiation. Disinfection experiments were conducted in slurry reactors with Escherichia coli, artificial light and sunlight. The influence of various amounts of Pt and Ag loading (0.5% to 5%) on the E. coli inactivation was examined and results indicated that 5% Pt-TiO2 and 0.5% Ag-TiO2 showed the highest photocatalytic E. coli inactivation. The Pt- and Ag-doped photocatalysts were characterized using XPS and TEM analysis. The influence of experimental parameters such as various photocatalysts, photocatalyst concentration, reactor geometry effect, pH and temperature on the photocatalytic disinfection was studied. The experimental results show that sunlight or near-UV light with TiO2 photocatalyst strongly inactivates E. coli. The Ag-TiO2 photocatalyst was the most efficient photocatalyst tested for bactericidal activity. A plausible mechanism ofphotocatalysed E. coli inactivation is discussed. In conclusion, the doped nano TiO2 photocatalysts is a potential candidate for E. coli inactivation.

  3. Analysis of the applicability of Ni, Cu, Au, Pt, and Pd nanoclusters for data recording

    NASA Astrophysics Data System (ADS)

    Redel', L. V.; Gafner, S. L.; Gafner, Yu. Ya.; Zamulin, I. S.; Goloven'ko, Zh. V.

    2017-02-01

    The applicability of individual Ni, Cu, Au, Pt, and Pd nanoclusters as data bits in next generation memory devices constructed on the phase-change carrier principle is studied. To this end, based on the modified tight-binding potential (TB-SMA), structure formation from the melt of nanoparticles of these metals to 10 nm in diameter was simulated by the molecular dynamics method. The effect of various crystallization conditions on the formation of the internal structures of Ni, Cu, Au, Pt, and Pd nanoclusters is studied. The stability boundaries of various crystalline isomers are analyzed. The obtained systematic features are compared for nanoparticles of copper, nickel, gold, platinum, and palladium of identical sizes. It is concluded that platinum nanoclusters of diameter D > 8 nm are the best materials among studied metals for producing memory elements based on phase transitions.

  4. High-frequency signal transmission through single-atom contacts of Au and Pt

    SciTech Connect

    Aoyama, Shodai; Kurokawa, Shu; Sakai, Akira

    2015-03-23

    Signal transmission through atom-sized contacts of Au and Pt has been studied at room temperature for frequencies from 9 kHz to 1 GHz and for conductances (1−10)G{sub 0} (G≡2e{sup 2}/h is the quantum unit of conductance). We measured the frequency spectrum of S parameter S{sub 21}=|S{sub 21}|e{sup iθ} and found θ∼0 up to 1 GHz for all contacts irrespective of their conductance. Our observations directly prove that the atom-sized contacts of Au and Pt, including their single-atom contacts, behave as a pure resistance in the RF regime.

  5. Low-energy electron elastic scattering cross sections for excited Au and Pt atoms

    NASA Astrophysics Data System (ADS)

    Felfli, Zineb; Eure, Amanda R.; Msezane, Alfred Z.; Sokolovski, Dmitri

    2010-05-01

    Electron elastic total cross sections (TCSs) and differential cross sections (DCSs) in both impact energy and scattering angle for the excited Au and Pt atoms are calculated in the electron impact energy range 0 ⩽ E ⩽ 4.0 eV. The cross sections are found to be characterized by very sharp long-lived resonances whose positions are identified with the binding energies of the excited anions formed during the collisions. The recent novel Regge-pole methodology wherein is embedded through the Mulholland formula the electron-electron correlations is used together with a Thomas-Fermi type potential incorporating the crucial core-polarization interaction for the calculations of the TCSs. The DCSs are evaluated using a partial wave expansion. The Ramsauer-Townsend minima, the shape resonances and the binding energies of the excited Au - and Pt - anions are extracted from the cross sections, while the critical minima are determined from the DCSs.

  6. Enhanced electrocatalytic activity of the Au-electrodeposited Pt nanoparticles-coated conducting oxide for the quantum dot-sensitized solar cells

    SciTech Connect

    Yoon, Yeung-Pil; Kim, Jae-Hong; Ahn, Kwang-Soon; Kang, Soon-Hyung; Kim, Hyunsoo; Choi, Chel-Jong; Kim, Kyong-Kook

    2014-08-25

    Au was electrodeposited potentiostatically at 0.3 V for 5 min on nanoporous Pt nanoparticle-coated F-doped SnO{sub 2} (FTO/Pt) substrates. For comparison, Au-electrodeposited FTO (FTO/Au) and Au-uncoated FTO/Pt were prepared. FTO/Au showed large-sized Au clusters dispersed sparsely over FTO, which resulted in lower electrocatalytic activity than FTO/Pt. In contrast, FTO/Pt exhibited poor stability unlike FTO/Au due to poisoning by the adsorption of sulfur species. The Au-electrodeposited FTO/Pt (FTO/Pt/Au) consisted of small Au clusters deposited over the entire area of Pt due to the effective Au nucleation provided by nanoporous metallic Pt. FTO/Pt/Au exhibited enhanced electrocatalytic activity and excellent stability because the small Au particles well-dispersed over the nanoporous metallic Pt network provided numerous electrochemical reaction sites, and the Pt surface was not exposed to the electrolyte. When FTO/Pt/Au was used as the counter electrode (CE) of a quantum dot-sensitized solar cell, the significantly enhanced electrocatalytic activity of the FTO/Pt/Au CE facilitated the reduction reaction of S{sub n}{sup 2− }+ 2e{sup −} (CE) → S{sub n−1}{sup 2−} + S{sup 2−} at the CE/electrolyte interface, resulting in a significantly hindered recombination reaction, S{sub n}{sup 2− }+ 2e{sup −} (TiO{sub 2} in the photoanode) → S{sub n-1}{sup 2−} + S{sup 2−}, and significantly improved overall energy conversion efficiency.

  7. Necklace-shaped Au-Ag nanoalloys: laser-assisted synthesis and nonlinear optical properties

    NASA Astrophysics Data System (ADS)

    Jafarkhani, P.; Torkamany, M. J.; Dadras, S.; Chehrghani, A.; Sabbaghzadeh, J.

    2011-06-01

    Here in this paper, necklace-shaped Au-Ag nanoalloys (NAs) have been synthesized by a laser-based approach. A chain of Ag nanoparticles (NPs), which were joined together with Au junctions, was formed upon copper vapor laser (CVL) irradiation of a colloidal mixture of Ag and Au NPs; while the corresponding NPs were separately provided by laser ablation of gold and silver targets in deionized water by a 1064 nm Q-switched Nd:YAG laser. Dependence of the NAs development process on the CVL irradiation time in three distinct stages of as-mixed, nucleation and complete formation has been systematically studied by UV-vis optical absorption spectroscopy analysis as well as by transmission electron microscopy (TEM), which was exploited to visually confirm the NAs evolution through the process. Furthermore, the x-ray photoelectron spectroscopy (XPS) technique was accurately employed to determine the synthesized alloy content. On the other hand, using the open-and closed-aperture Z-scan technique, the nonlinear absorption (NLA) as well as nonlinear refraction (NLR) changes in Au-Ag NAs were investigated through their formation. The deduced results from the nonlinear optical properties of the colloidal NAs in the mentioned stages were interpreted considering the spectroscopic and microscopic observations. The total change of individual Au and Ag NPs saturable absorption (SA) into the reverse saturable absorption (RSA) behavior was concluded through the evolution into Au-Ag NAs.

  8. Real-time imaging and elemental mapping of AgAu nanoparticle transformations.

    PubMed

    Lewis, E A; Slater, T J A; Prestat, E; Macedo, A; O'Brien, P; Camargo, P H C; Haigh, S J

    2014-11-21

    We report the controlled alloying, oxidation, and subsequent reduction of individual AgAu nanoparticles in the scanning transmission electron microscope (STEM). Through sequential application of electron beam induced oxidation and in situ heating and quenching, we demonstrate the transformation of Ag-Au core-shell nanoparticles into: AgAu alloyed, Au-Ag core-shell, hollow Au-Ag2O core-shell, and Au-Ag2O yolk-shell nanoparticles. We are able to directly image these morphological transformations in real-time at atomic resolution and perform energy dispersive X-ray (EDX) spectrum imaging to map changing elemental distributions with sub-nanometre resolution. By combining aberration corrected STEM imaging and high efficiency EDX spectroscopy we are able to quantify not only the growth and coalescence of Kirkendall voids during oxidation but also the compositional changes occurring during this reaction. This is the first time that it has been possible to track the changing distribution of elements in an individual nanoparticle undergoing oxidation driven shell growth and hollowing.

  9. Self-Supported PtAuP Alloy Nanotube Arrays with Enhanced Activity and Stability for Methanol Electro-Oxidation.

    PubMed

    Zhang, Lili; Ding, Liang-Xin; Chen, Hongbin; Li, Dongdong; Wang, Suqing; Wang, Haihui

    2017-02-21

    Inhibiting CO formation can more directly address the problem of CO poisoning during methanol electro-oxidation. In this study, 1D self-supported porous PtAuP alloy nanotube arrays (ANTAs) are synthesized via a facile electro-codeposition approach and present enhanced activity and improved resistance to CO poisoning through inhibiting CO formation (non-CO pathway) during the methanol oxidation reaction in acidic medium. This well-controlled Pt-/transition metal-/nonmetal ternary nanostructure exhibits a specific electroactivity twice as great as that of PtAu alloy nanotube arrays and Pt/C. At the same time, PtAuP ANTAs show a higher ratio of forward peak current density (If ) to backward peak current density (Ib ) (2.34) than PtAu ANTAs (1.27) and Pt/C (0.78). The prominent If /Ib value of PtAuP ANTAs indicates that most of the intermediate species are electro-oxidized to carbon dioxide in the forward scan, which highlights the high electroactivity for methanol electro-oxidation.

  10. Ore mineralogy of the Serra Pelada Au-Pd-Pt deposit, Carajás, Brazil and implications for ore-forming processes

    NASA Astrophysics Data System (ADS)

    Berni, Gabriel V.; Heinrich, Christoph A.; Lobato, Lydia M.; Wall, Vic

    2016-08-01

    Serra Pelada is a world-class hydrothermal Au-Pd-Pt deposit located at the eastern border of the Amazon craton, northern Brazil. The rocks at Serra Pelada have experienced intense tropical weathering for about 70 Ma, but drill core samples preserve the primary mineralogy and hydrothermal alteration features, with extreme grades of Au, Pd and Pt individually reaching hundreds of parts per million (ppm) by weight. Mineralization at Serra Pelada occurs in hydrothermally altered metasiltstones and dolomitic metasandstones at the hinge zone of a recumbent syncline, comprising zones of hematite, chlorite-carbon, argillic, and siliceous alteration. The main hydrothermal gangue minerals are quartz, kaolinite, sericite, amesite, hematite, monazite, florencite and variable amounts of highly reflective carbonaceous matter. Hydrothermal carbon input is evident from precipitated carbon occurring along crenulation planes and veinlets associated with the precious metals. Ore and accessory minerals include a variety of sulphide, selenide, arsenide, sulphate and oxide minerals, including gold with variable metal contents, palladian gold, fischesserite, sudovikovite, sperrylite, selenian braggite, isomertieite, mertieite-II and secondary Au-Pt-Pd alloys. The composition of fischesserite varies from the ideal formula (Ag3AuSe2) towards a more Ag-rich composition, indicating a disordered solid solution form that is stable only above 260 °C, consistent with the high thermal maturity of associated carbonaceous matter approaching graphite. Primary ore and gangue minerals at Serra Pelada comprise a suite of elements that are best transported in oxidising conditions and precipitated upon reduction. This suggests that fluid mixing between a highly oxidised (metal carrier) and a reduced fluid was a key process for high-grade noble metal precipitation at Serra Pelada.

  11. Direct electrochemical oxidation of S-captopril using gold electrodes modified with graphene-AuAg nanocomposites

    PubMed Central

    Pogacean, Florina; Biris, Alexandru R; Coros, Maria; Lazar, Mihaela Diana; Watanabe, Fumiya; Kannarpady, Ganesh K; Al Said, Said A Farha; Biris, Alexandru S; Pruneanu, Stela

    2014-01-01

    In this paper, we present a novel approach for the electrochemical detection of S-captopril based on graphene AuAg nanostructures used to modify an Au electrode. Multi-layer graphene (Gr) sheets decorated with embedded bimetallic AuAg nanoparticles were successfully synthesized catalytically with methane as the carbon source. The two catalytic systems contained 1.0 wt% Ag and 1.0 wt% Au, while the second had a larger concentration of metals (1.5 wt% Ag and 1.5 wt% Au) and was used for the synthesis of the Gr-AuAg-1 and Gr-AuAg-1.5 multicomponent samples. High-resolution transmission electron microscopy analysis indicated the presence of graphene flakes that had regular shapes (square or rectangular) and dimensions in the tens to hundreds of nanometers. We found that the size of the embedded AuAg nanoparticles varied between 5 and 100 nm, with the majority being smaller than 20 nm. Advanced scanning transmission electron microscopy studies indicated a bimetallic characteristic of the metallic clusters. The resulting Gr-AuAg-1 and Gr-AuAg-1.5 samples were used to modify the surface of commonly used Au substrates and subsequently employed for the direct electrochemical oxidation of S-captopril. By comparing the differential pulse voltammograms recorded with the two modified electrodes at various concentrations of captopril, the peak current was determined to be well-defined, even at relatively low concentration (10−5 M), for the Au/Gr-AuAg-1.5 electrode. In contrast, the signals recorded with the Au/Gr-AuAg-1 electrode were poorly defined within a 5×10−6 to 5×10−3 M concentration range, and many of them overlapped with the background. Such composite materials could find significant applications in nanotechnology, sensing, or nanomedicine. PMID:24596464

  12. Direct electrochemical oxidation of S-captopril using gold electrodes modified with graphene-AuAg nanocomposites.

    PubMed

    Pogacean, Florina; Biris, Alexandru R; Coros, Maria; Lazar, Mihaela Diana; Watanabe, Fumiya; Kannarpady, Ganesh K; Al Said, Said A Farha; Biris, Alexandru S; Pruneanu, Stela

    2014-01-01

    In this paper, we present a novel approach for the electrochemical detection of S-captopril based on graphene AuAg nanostructures used to modify an Au electrode. Multi-layer graphene (Gr) sheets decorated with embedded bimetallic AuAg nanoparticles were successfully synthesized catalytically with methane as the carbon source. The two catalytic systems contained 1.0 wt% Ag and 1.0 wt% Au, while the second had a larger concentration of metals (1.5 wt% Ag and 1.5 wt% Au) and was used for the synthesis of the Gr-AuAg-1 and Gr-AuAg-1.5 multicomponent samples. High-resolution transmission electron microscopy analysis indicated the presence of graphene flakes that had regular shapes (square or rectangular) and dimensions in the tens to hundreds of nanometers. We found that the size of the embedded AuAg nanoparticles varied between 5 and 100 nm, with the majority being smaller than 20 nm. Advanced scanning transmission electron microscopy studies indicated a bimetallic characteristic of the metallic clusters. The resulting Gr-AuAg-1 and Gr-AuAg-1.5 samples were used to modify the surface of commonly used Au substrates and subsequently employed for the direct electrochemical oxidation of S-captopril. By comparing the differential pulse voltammograms recorded with the two modified electrodes at various concentrations of captopril, the peak current was determined to be well-defined, even at relatively low concentration (10(-5) M), for the Au/Gr-AuAg-1.5 electrode. In contrast, the signals recorded with the Au/Gr-AuAg-1 electrode were poorly defined within a 5×10(-6) to 5×10(-3) M concentration range, and many of them overlapped with the background. Such composite materials could find significant applications in nanotechnology, sensing, or nanomedicine.

  13. Theoretical studies of diatomic and triatomic systems containing the group IB atoms Cu, Ag, and Au

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.

    1986-01-01

    Selected portions of the ground state potential energy surfaces of the Cu3, Ag3, AgCu2, and AuCu2 trimers are studied at the single-reference singles plus doubles configuration interaction and couple pair functional levels correlating 33 electrons. The calculations use the effective core potentials of Hay and Wadt (1985) to replace the deep core levels. The Cu3 and Ag3 molecules are found to have 2B2 obtuse-angled ground states, with low-lying 2A1 acute-angled excited states. The AgCu2 and AuCu2 molecules have 2A1 acute-angled ground states. The Cu3 molecule has a smaller 3d population than Ag3, and Cu3 has a smaller s electron density in the open-shell orbital than does Ag3, in agreement with recent ESR experiments.

  14. Ultrasensitive immunoassay based on a pseudobienzyme amplifying system of choline oxidase and luminol-reduced Pt@Au hybrid nanoflowers.

    PubMed

    Zhou, Ying; Zhuo, Ying; Liao, Ni; Chai, Yaqin; Yuan, Ruo

    2014-12-04

    A multi-functional luminol-reduced Pt@Au hybrid flower-like nanocomposite (luminol-Pt@AuNF) which not only acts as an efficient signal probe but also constitutes a pseudobienzyme amplifying system with choline oxidase (ChOx) was firstly synthesized and applied to the construction of a solid-state luminol electrochemiluminescence (ECL) immunosensor for cardiac troponin I (cTnI) detection.

  15. O2 reduction by lithium on Au(111) and Pt(111)

    SciTech Connect

    Xu, Ye; Shelton Jr, William Allison

    2010-01-01

    Lithium-oxygen has one of the highest specific energies among known electrochemical couples and holds the promise of substantially boosting the energy density of portable batteries. Mechanistic knowledge of oxygen electroreduction by Li is scarce at the present time, and the factors limiting the discharge and charge efficiencies of the Li-oxygen cathode are not understood. To shed light on the fundamental surface chemistry of this oxygen reduction reaction by Li (Li-ORR), we have performed periodic density functional theory calculations in conjunction with thermodynamic modeling for two metal surfaces, Au(111) and Pt(111). The inertness of Au(111) results in a low reversible potential of 1.51 V for initial O2 reduction via superoxide (LiO2). On Pt(111), initially the dissociative adsorption of O2 is rapid and reduction involves atomic O with a reversible potential of 1.76 V, whereas the associative LiO2 channel (at 1.93 V) is expected to dominate once O2 dissociation becomes hindered by surface species. On both Au(111) and Pt(111) the lithiation of O2 significantly weakens the O-O bond, and so the selectivity of the Li-ORR products is mainly to monoxides (LixO), not peroxides (LixO2). LixO units are energetically driven to form (LixO)n aggregates, and the interfaces between (LixO)n and the metal surfaces are found also to be active sites for stabilizing LiO2 and dissociating the O-O bond. During cycling, an oxygen reduction half-cycle is expected to begin with the reduction of atomic O instead of O2 at steady state. On Au(111) this occurs at 2.27 V, whereas the greater stability of O on Pt(111) lowers the reversible potential to a maximum of 1.93 V, being limited by the delithaition of (LixO)n products to atomic O. Therefore the intrinsic reactivity of Pt(111) renders it less effective for Li-ORR than Au(111).

  16. Phytosynthesis of stable Au, Ag and Au-Ag alloy nanoparticles using J. Sambac leaves extract, and their enhanced antimicrobial activity in presence of organic antimicrobials

    NASA Astrophysics Data System (ADS)

    Yallappa, S.; Manjanna, J.; Dhananjaya, B. L.

    2015-02-01

    A green chemistry approach for the synthesis of Au, Ag and Au-Ag alloy nanoparticles (NPs) using the corresponding metal precursors and Jasminum sambac leaves extract as both reducing and capping media, under microwave irradiation, is reported. During the formation, as expected, the reaction mixture shows marginal decrease in pH and an increase in solution potential. The formation of NPs is evident from their surface plasmon resonance (SPR) peak observed at ∼555 nm for Au, ∼435 nm for Ag and ∼510 nm for Au-Ag alloy. The XRD pattern shows fcc structure while the FTIR spectra indicate the presence of plant residues adsorbed on these NPs. Such a bio-capping of NPs is characterized by their weight loss, ∼35% due to thermal degradation of biomass, as observed in TG analysis. The colloidal dispersion of NPs is stable for about 6 weeks. The near spherical shape of NPs (ϕ20-50 nm) is observed by FE-SEM/TEM images and EDAX gives the expected elemental composition. Furthermore, these NPs showed enhanced antimicrobial activity (∼1-4-fold increase in zone of inhibition) in combination with antimicrobials against test strains. Thus, the phytosynthesized NPs could be used as effective growth inhibitors for various microorganisms.

  17. Phytosynthesis of stable Au, Ag and Au-Ag alloy nanoparticles using J. sambac leaves extract, and their enhanced antimicrobial activity in presence of organic antimicrobials.

    PubMed

    Yallappa, S; Manjanna, J; Dhananjaya, B L

    2015-02-25

    A green chemistry approach for the synthesis of Au, Ag and Au-Ag alloy nanoparticles (NPs) using the corresponding metal precursors and Jasminum sambac leaves extract as both reducing and capping media, under microwave irradiation, is reported. During the formation, as expected, the reaction mixture shows marginal decrease in pH and an increase in solution potential. The formation of NPs is evident from their surface plasmon resonance (SPR) peak observed at ∼555 nm for Au, ∼435 nm for Ag and ∼510 nm for Au-Ag alloy. The XRD pattern shows fcc structure while the FTIR spectra indicate the presence of plant residues adsorbed on these NPs. Such a bio-capping of NPs is characterized by their weight loss, ∼35% due to thermal degradation of biomass, as observed in TG analysis. The colloidal dispersion of NPs is stable for about 6 weeks. The near spherical shape of NPs (ϕ20-50 nm) is observed by FE-SEM/TEM images and EDAX gives the expected elemental composition. Furthermore, these NPs showed enhanced antimicrobial activity (∼1-4-fold increase in zone of inhibition) in combination with antimicrobials against test strains. Thus, the phytosynthesized NPs could be used as effective growth inhibitors for various microorganisms.

  18. Egg White Templated Synthesis of Ag and Au@Ag Alloy Microspheres for Surface-Enhanced Raman Spectroscopy Research.

    PubMed

    Li, Min; Zhang, Ying; Wang, Xiansong; Cui, Daxiang

    2016-01-01

    Herein, we report the green synthesis of Ag and Au@Ag microspheres by using the aqueous extracts of the egg white as well as their application as substrates for surface-enhanced Raman spectroscopy (SERS) detection. Both microspheres are prepared via the green synthesis method (room temperature, in aqueous solution and a benign reducer). The as-prepared urchin-like Ag microspheres have an average diameter of 600-800 nm, which is made up of some nanopricks with an average length of 10-40 nm. Meanwhile, the Au@Ag architectures prepared by galvanic replacement keep nearly similar size, which is also composed of some compact nanoparticles with an average diameter of about 10-40 nm. These products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electronic microscopy (TEM), and Fourier transform infrared spectrophotometer (FTIR). The study on SERS activities is also carried out for both microspheres. It is found that Au@Ag microspheres possess much higher SERS activity than Ag microspheres. Our work may shed light on the design and synthesis of self-assembled 3D micro/nano-architectures for the use of SERS, catalysis, biosensors, nanomedicine, etc.

  19. Intriguing centrality dependence of the Au-Au source size at the AGS

    SciTech Connect

    Baker, M.D.; The E802 Collaboration

    1996-06-01

    One of the main goals of high energy heavy ion physics is to establish the existence of a deconfined phase of nuclear matter--the quark-gluon plasma--at high temperatures or densities. One possible signature of such a phase transition, especially if it were first order, would be a larger source size or lifetime than a similar hadronic system. At current AGS energies, we attempt to form a quark- gluon plasma by achieving a high baryon density for a period of time in the center of the collision region. For a given density threshold, the size of this high density region should be a strong function of the impact parameter: the more central the event, the larger the high density region. Therefore, one possible signature of a quark-gluon plasma would be a sudden change in system lifetime or size as a function of the centrality of the collision. In this talk we present an intriguing effect which was not predicted for simple hadronic systems: a rapid increase of the HBT-measured source radius parameter for pion pairs with increasing centrality for Au-Au collisions at a beam momentum of 11.45 A GeV/c on a fixed target. Experience has shown, however, that we must be cautious in our interpretation. A complete understanding of the collision dynamics at a given energy must be built up from several measurements and new, but conventional, hadronic explanations must be considered for such unexpected effects. More study is needed, therefore, before any strong conclusions can be reached.

  20. Enhanced electrocatalytic performance of an ultrafine AuPt nanoalloy framework embedded in graphene towards epinephrine sensing.

    PubMed

    Thanh, Tran Duy; Balamurugan, Jayaraman; Tuan, Nguyen Thanh; Jeong, Hun; Lee, Seung Hee; Kim, Nam Hoon; Lee, Joong Hee

    2017-03-15

    A novel hierarchical nanoporous thin film of AuPt alloy embedded in graphene (AuPt@GR) was successfully synthesized through the self-assembly of ultrafine AuPt nanoparticles (~3nm) within GR sheets by means of a facile chemical vapor deposition (CVD) procedure without the use of any external organic capping agent and reducing agent. A binder-free sensor based on the AuPt@GR hybrid material was fabricated and its electrocatalytic activity was evaluated by using it to determine epinephrine (EP) in PBS solution (pH=7.4) and in human serum spiked PBS solution. Amperometric measurements of the sensor response showed an extremely low limit of detection (0.9nM at a signal-to-noise ratio of 3), high sensitivity (1628µAmM(-1)cm(-2)), wide linear detection range (1.5×10(-9)-9.6×10(-6)M), and negligible response to interferents. At the same time, the sensor also exhibited very long-term amperometric stability (4000s), cyclic voltammetric stability (500 cycles), good reproducibility, and highly accurate detection of EP in real samples. The excellent electrochemical performance was attributed to synergistic effects of Au, Pt, and GR as well as to the formation of a unique nanoporous structure that provided enhanced electrocatalytic activity, a highly electroactive surface, and fast mass transport. These results suggest strong potential of the AuPt@GR hybrids for use in biosensors and bioelectronic devices.

  1. TiO2 coated Au/Ag nanorods with enhanced photocatalytic activity under visible light irradiation

    NASA Astrophysics Data System (ADS)

    Zhou, Na; Polavarapu, Lakshminarayana; Gao, Nengyue; Pan, Yanlin; Yuan, Peiyan; Wang, Qing; Xu, Qing-Hua

    2013-05-01

    A facile method was used to prepare uniform Au NR/TiO2 and Au/Ag NR/TiO2 core-shell composite nanoparticles. Au/Ag NR/TiO2 nanoparticles were found to display significantly enhanced visible light photo-catalytic activity compared to Au NR/TiO2 and the commercially available TiO2 nanoparticles. The enhancement mechanism was ascribed to injection of hot electrons of photo-excited Au/Ag NRs to TiO2, which was confirmed by 633 nm laser induced reduction of silver ions on the surface of Au/Ag NR/TiO2 composite nanoparticles.A facile method was used to prepare uniform Au NR/TiO2 and Au/Ag NR/TiO2 core-shell composite nanoparticles. Au/Ag NR/TiO2 nanoparticles were found to display significantly enhanced visible light photo-catalytic activity compared to Au NR/TiO2 and the commercially available TiO2 nanoparticles. The enhancement mechanism was ascribed to injection of hot electrons of photo-excited Au/Ag NRs to TiO2, which was confirmed by 633 nm laser induced reduction of silver ions on the surface of Au/Ag NR/TiO2 composite nanoparticles. Electronic supplementary information (ESI) available: The details of experimental procedures, SEM and TEM images of various nanoparticles prepared, photographs of the samples, control experiments, reusability test, wavelength dependent photocatalytic activities of Au/Ag/TiO2 nanoparticles, and UV-Vis spectra of a Ag nanoparticle formed on the surface of Au/Ag/TiO2 under visible light irradiation. See DOI: 10.1039/c3nr00517h

  2. Structural and electronic properties of Au{sub n−x}Pt{sub x} (n = 2–14; x ⩽ n) clusters: The density functional theory investigation

    SciTech Connect

    Yuan, H. K.; Kuang, A. L.; Tian, C. L.; Chen, H.

    2014-03-15

    The structural evolutions and electronic properties of bimetallic Au{sub n–x}Pt{sub x} (n = 2–14; x ⩽ n) clusters are investigated by using the density functional theory (DFT) with the generalized gradient approximation (GGA). The monatomic doping Au{sub n–1}Pt clusters are emphasized and compared with the corresponding pristine Au{sub n} clusters. The results reveal that the planar configurations are favored for both Au{sub n–1}Pt and Au{sub n} clusters with size up to n = 13, and the former often employ the substitution patterns based on the structures of the latter. The most stable clusters are Au{sub 6} and Au{sub 6}Pt, which adopt regular planar triangle (D{sub 3h}) and hexagon-ring (D{sub 6h}) structures and can be regarded as the preferential building units in designing large clusters. For Pt-rich bimetallic clusters, their structures can be obtained from the substitution of Pt atoms by Au atoms from the Pt{sub n} structures, where Pt atoms assemble together and occupy the center yet Au atoms prefer the apex positions showing a segregation effect. With respect to pristine Au clusters, Au{sub n}Pt clusters exhibit somewhat weaker and less pronounced odd-even oscillations in the highest occupied and lowest unoccupied molecular-orbital gaps (HOMO-LUMO gap), electron affinity (EA), and ionization potential (IP) due to the partially released electron pairing effect. The analyses of electronic structure indicate that Pt atoms in AuPt clusters would delocalize their one 6s and one 5d electrons to contribute the electronic shell closure. The sp-d hybridizations as well as the d-d interactions between the host Au and dopant Pt atoms result in the enhanced stabilities of AuPt clusters.

  3. Synthesis and characterization of Au-core Ag-shell nanoparticles from unmodified apoferritin

    SciTech Connect

    Li, T.; Chattopadhyay, S.; Shibata, T.; Cook, R. E.; Miller, J. T.; Suthiwangcharoen, N.; Lee, S.; Winans, R. E.; Lee, B.

    2012-01-01

    Narrow-size distributed, water-soluble Au-core Ag-shell nanoparticles with a size range from 1 to 5 nm are synthesized using unmodified apoferritin as a template. Fast protein liquid chromatography reveals that the nanoparticles are formed inside the apoferritin cavity and are stable in aqueous solution. Electron microscopy shows that the particles are uniform in size and composed of both Au and Ag. In addition, extended X-ray absorption fine structure confirms that the particles have a core-shell structure with a Au core covered with a Ag shell. By varying the loading amounts of the silver precursor, the Ag shell thickness is controlled from one layer to several layers.

  4. Tuning the SERS Response with Ag-Au Nanoparticle-Embedded Polymer Thin Film Substrates.

    PubMed

    Rao, V Kesava; Radhakrishnan, T P

    2015-06-17

    Development of facile routes to the fabrication of thin film substrates with tunable surface enhanced Raman scattering (SERS) efficiency and identification of the optimal conditions for maximizing the enhancement factor (EF) are significant in terms of both fundamental and application aspects of SERS. In the present work, polymer thin films with embedded bimetallic nanoparticles of Ag-Au are fabricated by a simple two-stage protocol. Ag nanoparticles are formed in the first stage, by the in situ reduction of silver nitrate by the poly(vinyl alcohol) (PVA) film through mild thermal annealing, without any additional reducing agent. In the second stage, aqueous solutions of chloroauric acid spread on the Ag-PVA thin film under ambient conditions, lead to the galvanic displacement of Ag by Au in situ inside the film, and the formation of Ag-Au particles. Evolution of the morphology of the bimetallic nanoparticles into hollow cage structures and the distribution of Au on the nanoparticles are revealed through electron microscopy and energy dispersive X-ray spectroscopy. The localized surface plasmon resonance (LSPR) extinction of the nanocomposite thin film evolves with the Ag-Au composition; theoretical simulation of the extinction spectra provides insight into the observed trends. The Ag-Au-PVA thin films are found to be efficient substrates for SERS. The EF follows the variation of the LSPR extinction vis-à-vis the excitation laser wavelength, but with an offset, and the maximum SERS effect is obtained at very low Au content; experiments with Rhodamine 6G showed EFs on the order of 10(8) and a limit of detection of 0.6 pmol. The present study describes a facile and simple fabrication of a nanocomposite thin film that can be conveniently deployed in SERS investigations, and the utility of the bimetallic system to tune and maximize the EF.

  5. Kinetics-controlled growth of bimetallic RhAg on Au nanorods and their catalytic properties.

    PubMed

    Ye, Wei; Guo, Xia; Xie, Fang; Zhu, Rui; Zhao, Qing; Yang, Jian

    2014-04-21

    Controlled growth of hybrid metallic nanocomposites for a desirable structure in a combination of selected components is highly important for their applications. Herein, the controllable growth of RhAg on the gold nanorods is achieved from the dumbbell-like RhAg-tipped nanorods to the brushy RhAg-coated nanorods, or the rod-like Au@Ag-Rh nanorattles. These different growth modes of RhAg on the gold nanorods are correlated with the reducing kinetics of RhCl₃ and AgNO₃. In view of the promising catalytic properties of Rh, the gold nanorods modified by RhAg in different structures are examined as catalysts for the oxidation of o-phenylenediamine. It is found that brushy RhAg-coated nanorods present a higher catalytic efficiency than dumbbell-like RhAg-tipped nanorods and rod-like Au@Ag-Rh nanorattles. These results would benefit the overgrowth control on the one-dimensional metallic nanorods and the rational design of new generation heterogeneous catalysts and optical devices.

  6. Centrality and collision system dependence of antiproton production from p+A to Au+Au collisions at AGS energies

    NASA Technical Reports Server (NTRS)

    Sako, H.; Ahle, L.; Akiba, Y.; Ashktorab, K.; Baker, M. D.; Beavis, D.; Britt, H. C.; Chang, J.; Chasman, C.; Chen, Z.; Chu, Y. Y.; Cianciolo, V.; Cole, B. A.; Crawford, H. J.; Cumming, J. B.; Debbe, R.; Dunlop, J. C.; Eldredge, W.; Engelage, J.; Fung, S.-Y.

    1997-01-01

    Antiproton production in heavy ion collisions reflects subtle interplay between initial production and absorption by nucleons. Because the AGS energies (10--20 A(center-dot)GeV/c) are close to the antiproton production threshold, antiproton may be sensitive to cooperative processes such as QGP and hadronic multi-step processes. On the other hand, antiproton has been proposed as a probe of baryon density due to large N(anti N) annihilation cross sections. Cascade models predict the maximum baryon density reaches about 10 times the normal nucleus density in central Au+Au collisions, where the strong antiproton absorption is expected. In this paper, the authors show systematic studies of antiproton production from p+A to Au+Au collisions.

  7. Centrality definition using mid-rapidity E T distributions from p+Be to Au+Au at AGS energies

    NASA Astrophysics Data System (ADS)

    Tannenbaum, M. J.; E802 Collaboration

    1999-12-01

    Measurements by the E802 Collaboration of the A-dependence and pseudorapidity interval (δη) dependence of mid-rapidity E T distributions in a half-azimuth electromagnetic calorimeter are presented for p+Be, p+Au, O+Cu, Si+Au and Au+Au collisions at the BNL-AGS. The issues addressed are 1) whether the shapes of the upper edges of the E T distributions vary with δη similarly to the variation in shapes of mid-rapidity charged particle distributions and 2) how small a δη interval would still give a meaningful characterization of the 'nuclear geometry' of a reaction. A new way of plotting E T distributions was found from which the reaction dynamics could be read directly.

  8. Photochemically controlled electrochemical deposition and dissolution of Ag0 nanoclusters on au electrode surfaces.

    PubMed

    Riskin, Michael; Katz, Eugenii; Gutkin, Vitaly; Willner, Itamar

    2006-12-05

    A photoisomerizable thiolated nitrospiropyran SP, (1a), monolayer is assembled on a Au electrode by the primary deposition of thiolated nitromerocyanine isomer 1b as a monolayer on the electrode, followed by the irradiation of the surface with visible light, lambda > 475 nm. The surface coverage of nitrospiropyran units (1a) on the electrode is 2 x 10-10 mole cm-2. Irradiation of the electrode with UV light, 320 nm < lambda < 360 nm, results in the nitromerocyanine, MR, monolayer on the electrode that binds Ag+ ions to the phenolate units. The Ag+ ions associated with the MR monolayer undergo cyclic reduction to surface-confined Ag0 nanoclusters, and reoxidation and dissolution of the Ag0 nanoclusters to Ag+ ions associated with the monolayer are demonstrated. The electron-transfer rate constants for the reduction of Ag+ to Ag0 and for the dissolution of Ag0 were determined by chronoamperometry and correspond to ketred = 12.7 s-1 and ketox = 10.5 s-1, respectively. The nanoclustering rate was characterized by surface plasmon resonance measurements, and it proceeds on a time scale of 10 min. The size of the Ag0 nanoclusters is in the range of 2 to 20 nm. The electrochemically induced reduction of the MR-Ag+ monolayer to the MR-Ag0 surface and the reoxidation of the MR-Ag0 surface control the hydrophilic-hydrophobic properties of the surface. The advancing contact angle of the MR-Ag0-functionalized surface is 59 degrees , and the contact angle of the MR-Ag+-monolayer-functionalized surface is 74 degrees . Photoisomerization of the Ag0-MR surface to the Ag0-SP state, followed by the oxidation of the Ag0 nanoclusters, results in the dissolution of the Ag+ ions into the electrolyte solution.

  9. An electrochemical and multispectroscopic study of corrosion of Ag-Pd-Cu-Au alloys.

    PubMed

    Niemi, L; Minni, E; Ivaska, A

    1986-06-01

    Corrosion of a multi-phase Ag-Pd-Cu-Au-based commercial dental casting alloy and a Cu-Pd-rich and Ag-rich single-phase alloy was studied by open-circuit potential measurements, atomic absorption spectrometry, and electron spectroscopy. The alloys were immersed in an artificial saliva solution for 24 hr while the open-circuit potentials of the alloys were measured. The potentials were found to stabilize at certain levels after a steep rise during the first hours of the experiment. Cu was found to dissolve considerably from the Cu-Pd-rich alloy, with simultaneous enrichment of Pd in the surface layer of the alloy. Ag dissolved slightly from the Ag-rich alloy, but both Cu and Ag were found to dissolve from the multi-phase alloy. Neither Pd nor Au dissolved from any of the alloys studied.

  10. Solubility of Pt and Pd sulfides and Au metal in aqueous bisulfide solutions

    NASA Astrophysics Data System (ADS)

    Pan, P.; Wood, S. A.

    1994-09-01

    An experimental study of the solubility of Pt and Pd sulfides and Au metal in aqueous bisulfide solutions was conducted at temperatures from 200° to 350 °C and at saturated vapor pressure. A 500-mL Bridgemantype pressure vessel constructed of titanium, and equipped with a motor-driven magnetic stirrer was employed. The pH and the oxidation state were buffered by the coexistence of H2S/HS-/SO{inf4/sup2-}. The pH at temperature was calculated to be in the range 5.91 9.43, and ∑S was 0.3 2.2 m. Under the experimental conditions, the measured solubility of gold is about two to three orders of magnitude greater than that of either platinum and palladium, and the measured solubility of platinum is, in general, approximately equal to that of palladium, in molal units. The solubilities are found to be in the range: platinum 4 800 ppb, palladium 1 400 ppb, and gold 2 300 ppm. The solubility data can be modeled adequately using the following reactions: Au+H2S+HH-=Au(HS){2/-}+1/2H2 (K14); PtS+HS-+H+=Pt (HS){2/0}(K15); PdS+HS-+H+=Pd (HS){2/0}(K16); PtS2+H2=Pt (HS){2/0}(K21). With equilibrium constants determined as follows (errors represent two standard deviations): MediaObjects/126_2005_BF01886955_f1.tif Preliminary measurements of the solubilities of metallic Pt, Pd and Au as hydroxide complexes were also conducted using a second titanium pressure vessel, at temperatures of 200° to 350 °C and vapor saturation pressure, with pH and the oxidation state controlled or buffered by adding known amounts of NaOH and H2 gas. The concentration of NaOH was in the range 0.01 1.3 m, and the partial pressure of H2 at 200 °C was 62 275 bars, initially. Under the temperature and pressure conditions of these experiments, the solubility of platinum in 1 m NaOH solution is less than 100 ppb, that of palladium is less than 10 ppb and that of gold is less than 0.2 ppm; and in 0.01 m NaOH solutions, both Pt and Pd solubilities are less than 1 ppb. These data indicate that the contributions

  11. Sintered Cr/Pt and Ni/Au ohmic contacts to B12P2

    DOE PAGES

    Frye, Clint D.; Kucheyev, Sergei O.; Edgar, James H.; ...

    2015-04-09

    With this study, icosahedral boron phosphide (B12P2) is a wide-bandgap semiconductor possessing interesting properties such as high hardness, chemical inertness, and the reported ability to self-heal from irradiation by high energy electrons. Here, the authors developed Cr/Pt and Ni/Au ohmic contacts to epitaxially grown B12P2 for materials characterization and electronic device development. Cr/Pt contacts became ohmic after annealing at 700 °C for 30 s with a specific contact resistance of 2×10–4 Ω cm2, as measured by the linear transfer length method. Ni/Au contacts were ohmic prior to any annealing, and their minimum specific contact resistance was ~l–4 × 10–4 Ωmore » cm2 after annealing over the temperature range of 500–800 °C. Rutherford backscattering spectrometry revealed a strong reaction and intermixing between Cr/Pt and B12P2 at 700 °C and a reaction layer between Ni and B12P2 thinner than ~25 nm at 500 °C.« less

  12. Luminescent, bimetallic AuAg alloy quantum clusters in protein templates

    NASA Astrophysics Data System (ADS)

    Mohanty, Jyoti Sarita; Xavier, P. Lourdu; Chaudhari, Kamalesh; Bootharaju, M. S.; Goswami, N.; Pal, S. K.; Pradeep, T.

    2012-06-01

    We report the synthesis of luminescent AuAg alloy quantum clusters (QCs) in bovine serum albumin (BSA), for the first time, with experimentally determined atomic composition. Mixing of the as-synthesized protein-protected Au and Ag clusters resulted in the formation of alloy AuAg clusters within the BSA. Mass spectrometric analysis of the product of a 1 : 1 molar ratio reaction mixture of AuQC@BSA and AgQC@BSA suggested that the alloy clusters could be Au38-xAgx@BSA. Further analyses by standard techniques revealed that the alloy cluster core of ~1.2 nm diameter is composed of nearly zero valent Au and Ag atoms that exhibit distinctly different steady state and time resolved excited state luminescence profiles compared to the parent clusters. Tuning of the alloy composition was achieved by varying the molar ratio of the parent species in the reaction mixture and compositional changes were observed by mass spectrometry. In another approach, mixing of Au3+ ions with the as-synthesized AgQC@BSA also resulted in the formation of alloy clusters through galvanic exchange reactions. We believe that alloy clusters with the combined properties of the constituents in versatile protein templates would have potential applications in the future. The work presents interesting aspects of the reactivity of the protein-protected clusters.We report the synthesis of luminescent AuAg alloy quantum clusters (QCs) in bovine serum albumin (BSA), for the first time, with experimentally determined atomic composition. Mixing of the as-synthesized protein-protected Au and Ag clusters resulted in the formation of alloy AuAg clusters within the BSA. Mass spectrometric analysis of the product of a 1 : 1 molar ratio reaction mixture of AuQC@BSA and AgQC@BSA suggested that the alloy clusters could be Au38-xAgx@BSA. Further analyses by standard techniques revealed that the alloy cluster core of ~1.2 nm diameter is composed of nearly zero valent Au and Ag atoms that exhibit distinctly different

  13. Limits of the energy-spin phase space beyond the proton drip line : entry distributions fo Pt and Au isobars.

    SciTech Connect

    Smith, M. B.; Cizewski, J. A.; Carpenter, M. P.; Kondev, F. G.; Khoo, T. L.; Lauritsen, T.; Janssens, R. V. F.; Abu Saleem, K.; Ahmad, I.; Amro, H.; Danchev, M.; Davids, C. N.; Hartley, D. J.; Heinz, A.; Lister, C. J.; Ma, W. C.; Poli, G. L.; Ressler, J. J.; Reviol, W.; Riedinger, L. L.; Seweryniak, D.; Wiedenhoever, I.; Rutgers univ.; Illinois Inst. of Tech.; Mississippi State Univ.; Univ. of Tennessee; Univ. of Maryland; Washington Univ.

    2003-01-09

    Entry distributions in angular momentum and excitation energy have been measured for several very proton-rich isotopes of Pt and Au. This is the first systematic study of the energy-spin phase space for nuclei near and beyond the proton drip line. Comparisons are made between the distributions associated with proton-unbound Au nuclei and more stable Pt isobars. In {sup 173}Au the first evidence is seen for the limits of excitation energy and angular momentum which a nucleus beyond the proton drip line can sustain.

  14. Near infrared Ag/Au alloy nanoclusters: tunable photoluminescence and cellular imaging.

    PubMed

    Wang, Chuanxi; Xu, Lin; Xu, Xiaowei; Cheng, Hao; Sun, Hongchen; Lin, Quan; Zhang, Chi

    2014-02-15

    The fluorescent nanomaterials play an important role in cellular imaging. Although the synthesis of fluorescent metal nanoclusters (NCs) have been developing rapidly, there are many technical issues in preparing metal alloy NCs. Herein, we used a facile galvanic replacement reaction to prepare Ag/Au alloy NCs. The characterizations of UV, PL, HRTEM, EDX and XPS confirm one fact the Ag/Au alloy NCs are carried out. As-prepared Ag/Au alloy NCs display near-infrared (NIR) fluorescence centered at 716 nm and show tunable luminescence from visible red (614 nm) to NIR (716 nm) by controlling the experimental Ag/Au ratios. Moreover, as-prepared Ag/Au alloy NCs are protected by glutathione (GSH) whose some functional groups including thiol, carboxyl and amino groups make the as-prepared alloy NCs exhibit good dispersion in aqueous solution, high physiological stability and favorable biocompatibility. Together with NIR fluorescence, these advantages make alloy NCs be promising candidate in biological labeling.

  15. Third-order optical nonlinearity studies of bilayer Au/Ag metallic films

    NASA Astrophysics Data System (ADS)

    Mezher, M. H.; Chong, W. Y.; Zakaria, R.

    2016-05-01

    This paper presents nonlinear optical studies of bilayer metallic films of gold (Au) and silver (Ag) on glass substrate prepared using electron beam evaporation. The preparation of Au and Ag nanoparticles (NPs) on the substrate involved the use of electron beam deposition, then thermal annealing at 600 °C and 270 °C, respectively, to produce a randomly distributed layer of Au and a layer of Ag NPs. Observation of field-effect scanning electron microscope images indicated the size of the NPs. Details of the optical properties related to peak absorption of surface plasmon resonance of the nanoparticle were revealed by use of UV-Vis spectroscopy. The Z-scan technique was used to measure the nonlinear absorption and nonlinear refraction of the fabricated NP layers. The third-order nonlinear refractive index coefficients for Au and Ag are (-9.34 and  -1.61)  ×  10-11 cm2 W-1 given lower n 2, in comparison with bilayer (Au and Ag) NPs at  -1.24  ×  10-10 cm2 W-1. The results show bilayer NPs have higher refractive index coefficients thus enhance the nonlinearity effects.

  16. Study on surface-enhanced Raman scattering efficiency of Ag core-Au shell bimetallic nanoparticles

    NASA Astrophysics Data System (ADS)

    Dong, Xiao; Gu, Huaimin; Kang, Jian; Yuan, Xiaojuan

    2009-08-01

    In this article, the relationship between the states of Ag core-Au shell (core-shell) nanoparticles (NP) and the intensity of Raman scattering of analytes dissolved in the water and adsorbed on the NP was studied. The core-shell NP were synthesised by coating Au layers over Ag seeds by the method of "seed-growth". To highlight the advantage of the core-shell NP, Ag colloid and Au colloid were chosen for contrasting. The analyte that were chosen for this testing were methylene blue (MB) for the reason that MB has very strong signal in surface-enhanced Raman scattering (SERS). The SERS activity of optimalizing states of Ag and Au colloids were compared with that of core-shell NP when MB was used as analyte. In this study, sodium chloride, sodium sulfate and sodium nitrate were used as aggregating agents for Ag, Au colloids and core-shell NP, because anions have a strong influence on the SERS efficiency and the stability of colloids. The results indicate that core-shell NP can obviously enhance the SERS of MB. The aim of this study is to prove that compared with the metal colloid, the core-shell NP is a high efficiency SERS active substrate.

  17. Effect of Ag underlayer on microstructures and perpendicular magnetic properties of CoPt nanocomposite thin films.

    PubMed

    Shen, C L; Kuo, P C; Li, Y S; Lin, G P; Huang, K T; Ou, S L; Chen, S C

    2011-12-01

    CoPt/Ag films were prepared by magnetron sputtering on glass substrates and subsequent annealing. The dependence of degree of ordering and magnetic properties on Ag film thickness and annealing conditions were investigated. It was found that the Ag underlayer played a dominant role in inducing the (001) texture of the CoPt film after annealing. CoPt films with a thickness about 20 nm and Ag underlayers with a thickness about 70 nm are easy to obtain a large degree of ordering and a perpendicular magnetic anisotropy after annealing at 700 degrees C for 30 min. CoPt/Ag films with out-of-plane coercivity (Hc (perpendicular)) in the range of 13.5-14.0 kOe and a out-of-plane squareness (S(perpendicular)) of 0.97 were obtained after annealing at 700 degrees C for 30 min. Ag underlayer is beneficial to enhance the Hc(perpendicular)and S(perpendicular) of CoPt film significantly. The degree of ordering and perpendicular magnetic properties of the CoPt films which deposited on Ag underlayer are larger than those of the single layer CoPt films.

  18. Electrical transport properties of Co-based skutterudites filled with Ag and Au

    NASA Astrophysics Data System (ADS)

    Stoica, Maria; Lo, Cynthia S.

    2012-09-01

    This work presents theoretical calculations of the electrical transport properties of the Ag, Au, and La fractionally filled bulk skutterudites: CoSb3, CoAs3, and CoP3. Density functional theory, along with projector augmented wave potentials, was used to calculate bulk band structures and partial density of states. The Seebeck coefficient (S), electrical conductivity (σ), and power factor (S2σ) were calculated as a function of temperature and filling fraction using the momentum matrix method along the entire first Brillouin zone. Calculated trends in the electrical transport properties agree with previously published experimental measurements for p-type unfilled and La-filled CoSb3. The calculated S and σ values for the Ag- and Au-filled compounds indicate that the most promising electronic properties are exhibited by p-type Au0.125(CoSb3)4, Au0.25(CoSb3)4, and Au(CoSb3)4. Au is therefore recommended as a promising filler for improved thermoelectric properties in cobalt antimonides. Ag is also a good filler for cobalt phosphides; the creation of a negative indirect band gap is observed in Ag(CoP3)4, which indicates semimetallic behavior, so this compound may possibly exhibit lower thermal conductivity than metallic CoP3. Finally, we recommend future directions for improving the thermoelectric figure of merit of these materials.

  19. A silk derived carbon fiber mat modified with Au@Pt urchilike nanoparticles: A new platform as electrochemical microbial biosensor.

    PubMed

    Deng, Liu; Guo, Shaojun; Zhou, Ming; Liu, Ling; Liu, Chang; Dong, Shaojun

    2010-06-15

    We present here a facile and efficient route to prepare silk derived carbon mat modified with Au@Pt urchilike nanoparticles (Au@Pt NPs) and develop an Escherichia coli (E. coli)-based electrochemical sensor using this material. Silk is a natural protein fiber, and it is abundant with kinds of functionalities which are important in the development of the derived material. The S-derived carbon fiber mat have amino, pyridine and carbonyl functional groups, these natural existent functionalities allow the Au@Pt NPs to self-assemble on the carbon fiber surface and provide a biocompatible microenvironment for bacteria. The Au@Pt NPs modified S-derived carbon fiber is sensitive to detect the E. coli activities with a low detection limit, where glucose is used as a prelimiltary substrate to evaluate them. The performance of Au@Pt/carbon fiber mat based biosensor is much better than that of commercial carbon paper based biosensor. The high sensitivity of this biosensor stems from the unique electrocatalytic properties of Au@Pt urchilike NPs and quinone groups presented in S-derived carbon fiber. This biosensor is also tested for detection of organophosphate pesticides, fenamiphos. The relative inhibition of E. coli activity is linear with -log[fenamiphos] at the concentration range from 0.5mg/L to 36.6 mg/L with lowest observable effect concentration (LOEC) of 0.09 mg/L. The Au@Pt NPs modified S-derived carbon fiber mat possesses high conductivity, biocompatibility and high electrocatalytic activity and be can used as advanced electrode materials for microbial biosensor improvement. The microbial biosensor based on this material shows potential applications in environmental monitoring.

  20. A dealloying process of core-shell Au@AuAg nanorods for porous nanorods with enhanced catalytic activity

    NASA Astrophysics Data System (ADS)

    Guo, Xia; Ye, Wei; Sun, Hongyan; Zhang, Qiao; Yang, Jian

    2013-11-01

    One-dimensional porous metallic nanomaterials have attracted much attention due to their unique shape and hollow structure. Herein, the gold nanorods in a porous shell of an AuAg alloy are synthesized via a dealloying process of the core-shell Au@AuAg nanorods at room temperature. The formation of tiny pores in the shell results in the huge red-shift, sharp decrease and drastic broadening of longitudinal surface plasmon resonance absorption. The continuous removal of silver from the porous nanorods leads to the breakage of tiny pores and leaves a rough surface on the nanorods behind. The rough surface gradually becomes smooth in the subsequent dealloying process. The surface structures of these intermediates are correlated with their absorption spectra and catalytic activities for the catalytic reduction of p-nitrophenol. The porous nanorods show a higher catalytic efficiency than the gold nanorods, the core-shell nanorods and the rough nanorods. The results indicate that the dealloying of anisotropic bimetal nanomaterials not only provides an effective pathway to carve the structures on the nanoscale but also offers numerous opportunities to observe novel optical properties and enhanced catalysis performances.One-dimensional porous metallic nanomaterials have attracted much attention due to their unique shape and hollow structure. Herein, the gold nanorods in a porous shell of an AuAg alloy are synthesized via a dealloying process of the core-shell Au@AuAg nanorods at room temperature. The formation of tiny pores in the shell results in the huge red-shift, sharp decrease and drastic broadening of longitudinal surface plasmon resonance absorption. The continuous removal of silver from the porous nanorods leads to the breakage of tiny pores and leaves a rough surface on the nanorods behind. The rough surface gradually becomes smooth in the subsequent dealloying process. The surface structures of these intermediates are correlated with their absorption spectra and

  1. Localized surface plasmon resonance and surface enhanced Raman scattering responses of Au@Ag core-shell nanorods with different thickness of Ag shell.

    PubMed

    Ma, Yanan; Zhou, Jun; Zou, Weibo; Jia, Zhenhong; Petti, Lucia; Mormile, Pasquale

    2014-06-01

    The properties of the localized surface plasmon resonance (LSPR) and the surface enhanced Raman scattering (SERS) of the core-shell bimetallic nanostructures, that is the monodisperse Au@Ag core-shell nanorods with different thickness of Ag shell, are theoretically and experimental researched. The UV-vis-NIR absorption spectra of the Au@Ag core-shell nanorods are measured and displayed their blue-shifts of the longitudinal plasmon resonance peaks with increasing of Ag concentrations in the colloidal solution. And the absorption spectra of the Au@Ag core-shell nanorods are simulated by the Finite Element Method (FEM), which are in agreement with the experimental measurements and reveal their LSPR mechanism as the varying structures. In addition, Rhodamine 6G, as a Raman reporter molecule, is used to investigate SERS of gold nanorods and Au@Ag core-shell nanorods. It is found that Au@Ag core-shell nanorods have better SERS responses, comparing with those of Au nanorods, and their SERS intensities are increased with the increases of the Ag shell thickness, which demonstrate that the chemisorptive bond effect and the morphology of the nanoparticle play key roles to the SERS signals. It is significant to design the biosensor based on the properties of Au@Ag core-shell nanorods.

  2. Theoretical Modeling of Tribochemical Reaction on Pt and Au Contacts: Mechanical Load and Catalysis.

    PubMed

    Qi, Yubo; Yang, Jing; Rappe, Andrew M

    2016-03-23

    Microelectromechanical system and nanoelectromechanical system (MEMS and NEMS) transistors are considered promising for size-reducing and power-maximizing electronic devices. However, the tribopolymer which forms due to the mechanical load to the contacts affects the conductivity dramatically. This is one of the challenging problems that prevents the widespread practical use of these otherwise promising devices. Here, we use density functional theory (DFT) to investigate the mechanisms of tribopolymer formation, including normal mechanical load and the catalytic effect, as well as the electrochemical effect of the metal contacts. We select benzene as the background gas, because it is one of the most common and severe hydrocarbon contaminants. Two adsorption cases are considered: one is benzene on the reactive metal surface, Pt(111), and the other is benzene on the noble metal, Au(111). We demonstrate that the formation of tribopolymer is induced by both the mechanical load and the catalytic effect of the contact. First, benzene molecules are adsorbed on the Pt surfaces. Then, due to the closure of the Pt contacts, stress is applied to the adsorbates, making the C-H bonds more fragile. As the stress increases further, H atoms are pressed close to the Pt substrate and begin to bond with Pt atoms. Thus, Pt acts as a catalyst, accelerating the dehydrogenation process. When there is voltage applied across the contacts, the catalytic effect is enhanced by electrochemistry. Finally, due to the loss of H atoms, C atoms become more reactive and link together or pile up to form tribopolymer. By understanding these mechanisms, we provide guidance on designing strategies for suppressing tribopolymer formation.

  3. Trimetallic nanostructures: the case of AgPd/Pt multiply twinned nanoparticles

    PubMed Central

    Khanal, Subarna; Bhattarai, Nabraj; Velázquez-Salazar, J. Jesús; Bahena, Daniel; Soldano, German; Ponce, Arturo; Mariscal, Marcelo M.; Mejía-Rosales, Sergio; José-Yacamán, Miguel

    2013-01-01

    We report the synthesis, structural characterization, and atomistic simulations of AgPd/Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particles at atomistic level. In some nanoparticles, the formation of a hollow structure was also observed, that facilitates the alloying of Ag and Pt in the shell region and the segregation of Ag atoms in the surface, affecting the catalytic activity and stability. We also investigated the growth mechanism of the nanoparticles using grand canonical Monte Carlo simulations, and we have found that Pt regions grow at overpotentials on the AgPd nanoalloys, forming 3D islands at the early stages of the deposition process. We found very good agreement between the simulated structures and those observed experimentally. PMID:24165796

  4. Antibacterial activity of microstructured Ag/Au sacrificial anode thin films.

    PubMed

    Köller, Manfred; Sengstock, Christina; Motemani, Yahya; Khare, Chinmay; Buenconsejo, Pio J S; Geukes, Jonathan; Schildhauer, Thomas A; Ludwig, Alfred

    2015-01-01

    Ten different Ag dot arrays (16 to 625 microstructured dots per square mm) were fabricated on a continuous Au thin film and for comparison also on Ti film by sputter deposition and photolithographic patterning. To analyze the antibacterial activity of these microstructured films Escherichia coli and Staphylococcus aureus were placed onto the array surfaces and cultivated overnight. To analyze the viability of planktonic as well as surface adherent bacteria, the applied bacterial fluid was subsequently aspirated, plated on blood agar plates and adherent bacteria were detected by fluorescence microscopy. A particular antibacterial effect towards both bacterial strains was induced by Ag dot arrays on fabricated Au thin film (sacrificial anode system for Ag), due to the release of Ag ions from dissolution of Ag dots in contrast to Ag dot arrays fabricated on the Ti thin films (non-sacrificial anode system for Ag) which remained intact to the original dot shape. The required number of Ag dots on gold film to achieve complete bactericidal effects for both bacterial strains was seven times lower than that observed with Ag dot arrays on Ti film.

  5. Catalytic Properties of AgPt Nanoshells as a Function of Size: Larger Outer Diameters Lead to Improved Performances.

    PubMed

    Rodrigues, Thenner S; da Silva, Anderson G M; Gonçalves, Mariana C; Fajardo, Humberto V; Balzer, Rosana; Probst, Luiz F D; da Silva, Alisson H M; Assaf, Jose M; Camargo, Pedro H C

    2016-09-13

    We report herein a systematic investigation on the effect of the size of silver (Ag) nanoparticles employed as starting materials over the morphological features and catalytic performances of AgPt nanoshells produced by a combination of galvanic replacement between Ag and PtCl6(2-) and PtCl6(2-) reduction by hydroquinone. More specifically, we focused on Ag nanoparticles of four different sizes as starting materials, and found that the outer diameter, shell thickness, and the number of Pt surface atoms of the produced nanoshells increased with the size of the starting Ag nanoparticles. The produced AgPt nanoshells were supported into SiO2, and the catalytic performances of the AgPt/SiO2 nanocatalysts toward the gas-phase oxidation of benzene, toluene, and o-xylene (BTX oxidation) followed the order: AgPt 163 nm/SiO2 > AgPt 133 nm/SiO2 > AgPt 105 nm/SiO2 > AgPt 95 nm/SiO2. Interestingly, bigger AgPt nanoshell sizes lead to better catalytic performances in contrast to the intuitive prediction that particles having larger outer diameters tend to present poorer catalytic activities due to their lower surface to volume ratios as compared to smaller particles. This is in agreement with the H2 chemisorption results, and can be assigned to the increase in the Pt surface area with size due to the presence of smaller NPs islands at the surface of the nanoshells having larger outer diameters. This result indicates that, in addition to the overall diameters, the optimization of the surface morphology may play an important role over the optimization of catalytic activities in metal-based nanocatalysts, which can be even more pronounced that the size effect. Our data demonstrate that the control over surface morphology play a very important role relative to the effect of size to the optimization of catalytic performances in catalysts based on noble-metal nanostructures.

  6. Ag@Au core-shell dendrites: a stable, reusable and sensitive surface enhanced Raman scattering substrate

    PubMed Central

    Jun Yin, Hong; Yang Chen, Zhao; Mei Zhao, Yong; Yang Lv, Ming; An Shi, Chun; Long Wu, Zheng; Zhang, Xin; Liu, Luo; Li Wang, Ming; Jun Xu, Hai

    2015-01-01

    Surface enhanced Raman scattering (SERS) substrate based on fabricated Ag@Au core-shell dendrite was achieved. Ag dendrites were grown on Si wafer by the hydrothermal corrosion method and Au nanofilm on the surface of Ag dendritic nanostructure was then fabricated by chemical reduction. With the help of sodium borohydride in water, Au surface absorbates such as thiophene, adenine, rhodamine, small anions (Br– and I–), and a polymer (PVP, poly(N-vinylpyrrolidone)) can be completely and rapidly removed. After four repeatable experiments, the substrate SERS function did not decrease at all, indicating that the Ag@Au dendrite should be of great significance to SERS application because it can save much resource. Six-month-duration stability tests showed that the Ag@Au core-shell dendrite substrate is much more stable than the Ag dendrite substrates. We have also experimented on fast detection of Cd2+ at 10−8  M concentration by decorating single-stranded DNA containing adenine and guanine bases on the surface of this Ag@Au dendrite. Finite-difference time-domain simulations were carried out to investigate the influence of Au nanolayer on Ag dendrites, which showed that the local electric fields and enhancement factor are hardly affected when a 4 nm Au nanolayer is coated on Ag dendrite surface. PMID:26412773

  7. Studies on polishing of Ti and Ag-Pd-Cu-Au alloy with five dental abrasives.

    PubMed

    Hirata, T; Nakamura, T; Takashima, F; Maruyama, T; Taira, M; Takahashi, J

    2001-08-01

    Titanium (Ti) and Ag-Pd-Cu-Au alloy were examined for their polishing behaviour by conducting manually controlled polishing tests using five dental abrasives [carborundum point (CR) and silicone points (R1 and R2)] driven by a high torque micromotor with rotational speeds ranging from 2000 to 15 000 r.p.m. Polishing of Ti resulted in less volume of removal upon polishing, a rougher surface and larger loss of abrasives, compared with polishing of Ag-Pd-Cu-Au alloy. Polishing of Ti with a rotational speed of 15 000 r.p.m. led to the largest volume of removal upon polishing, whilst that of 10 000 r.p.m. produced the optimal volume for Ag-Pd-Cu-Au alloy. It was concluded that Ti was much more difficult to polish, requiring special care (e.g. frequent exchange of abrasives). Development of new abrasives for polishing Ti is required.

  8. Energetic, electronic, and thermal effects on structural properties of Ag-Au nanoalloys.

    PubMed

    Chen, Fuyi; Johnston, Roy L

    2008-01-01

    Using a genetic algorithm global optimization approach combined with density functional theory calculations, a search has been made for the lowest energies of (AgAu)(m) nanoalloys with 20-150 atoms (diameters of 1.0-2.0 nm). A total of 31 decahedra, 35 icosahedra, and 2 close-packed motifs are identified in two icosahedral windows and one Marks-decahedral window. These structural motifs have twinned, capped, defective, and distorted atomic packing compared to classical clusters, such as the icosahedron. The magic numbers, atomic ordering, electronic structure, and melting behavior are further studied, and a new poly-nanocrystalline decahedral motif, Ag(44)Au(44), is found to have high structural, electronic, and thermal stability. Our results show that alloying can lead to a remarkable stabilization of local order and provide a comprehensive model for the structures and properties of Ag-Au nanoalloys.

  9. Development of Au-Ag nanowire mesh fabrication by UV-induced approach

    SciTech Connect

    Saggar, Siddhartha; Predeep, Padmanabhan

    2014-10-15

    In an attempt to overcome the limitations of the presently prevailing transparent conducting electrode (TCE) - indium tin oxide (ITO) - many materials have been considered for replacing ITO. Recently, a novel method has been reported for the synthesis of Au-Ag nanowire (NW) mesh, and tested successfully for organic-light-emitting-diodes (OLEDs). It employs UV-induced reduction of gold- and silver- precursors to form Au-Ag NW mesh. In this report, Au-Ag NW mesh thin films are synthesized on glass substrates with an objective for use as facing-electrode for Organic Photovoltaics. Various issues and factors affecting the fabrication-process have been improved, and are also discussed here. The electrode showed good transmitivity, of around 95% (excluding that of glass substrate). The advantage of the technique is its simple processing method and cost-effectiveness.

  10. Fabrication of catalytically active Au/Pt/Pd trimetallic nanoparticles by rapid injection of NaBH{sub 4}

    SciTech Connect

    Zhang, Haijun; Lu, Lilin; Cao, Yingnan; Du, Shuang; Cheng, Zhong; Zhang, Shaowei

    2014-01-01

    Graphical abstract: The synthesis and characterization of 2.0 nm-diameter Au/Pt/Pd nanoparticles are reported. The catalytic activity for glucose oxidation of the nanoparticles is several times higher than that of Au nanoparticles with nearly same size. - Highlights: • PVP-protected Au/Pt/Pd trimetallic nanoparticles (TNPs) of 2.0 nm in diameter were prepared. • The catalytic activity of TNPs is several times higher than that of Au nanoparticles. • Negatively charged Au atoms in the TNPs were confirmed by DFT calculation. - Abstract: Au/Pt/Pd trimetallic nanoparticles (TNPs) with an alloyed structure and an average diameter of about 2.0 nm were prepared via reducing the corresponding ions with rapidly injected NaBH{sub 4}, and characterized by UV–vis, TEM and HR-TEM. The catalytic activity of as-prepared TNPs for the aerobic glucose oxidation is several times higher than that of Au monometallic nanoparticles with about the same average size, which could be attributed to the catalytically active sites provided by the negatively charged Au atoms as a result of the electron donation from the neighboring Pd atoms. This was well supported by the electron density calculations based on the density functional theory.

  11. Resonances in Near-Threshold Electron Elastic Scattering Cross Sections for Au and Pt: Identification of Electron Affinities.

    NASA Astrophysics Data System (ADS)

    Felfli, Z.; Msezane, A. Z.; Sokolovski, D.

    2008-05-01

    The near-threshold electron attachment in Au and Pt atoms is investigated as Regge resonances using our recent Regge-pole methodology [1] together with a Thomas-Fermi potential which incorporates the crucial core-polarization interaction. The resultant stable negative ion states are found to have the discernable characteristic of very small imaginary parts of the Regge poles, which translates into long-lived resonances. The near-threshold electron elastic total cross sections for both Au and Pt are characterized by multiple resonances from which we extract the electron affinity (EA) values through the scrutiny of the imaginary part of the relevant complex angular momentum. For Au^- and Pt^- the extracted binding energies of 2.262 eV and 2.163 eV, respectively, are in excellent agreement with the most recently measured EA values for Au [2] and Pt [3]. Ramsauer-Townsend minima, shape resonances and the Wigner threshold behavior are identified in both Au^- and Pt^- ions.[1] D. Sokolovski et al, Phys. Rev. A 76, 012705 (2007)[2] H. Hotop and W. C. Lineberger, J. Chem. Ref. Data 14, 731 (1985)[3] R. C. Bilodeau et al, Phys. Rev. A 61, 012505 (1999)

  12. Effect of Au Content on Thermal Stability and Mechanical Properties of Au-Cu-Ag-Si Bulk Metallic Glasses

    NASA Astrophysics Data System (ADS)

    Guo, H.; Zhang, W.; Chen, M. W.; Saotome, Y.; Fukuhara, M.; Inoue, A.

    2011-06-01

    The thermal stability, glass-forming ability (GFA), and mechanical and electrical properties of Au-based Au x Si17Cu75.5- x Ag7.5 ( x = 40 to 75.5 at. pct) metallic glasses were investigated. The glass transition temperature ( T g ) and crystallization temperature ( T x ) decreased with increasing Au content. The ultralow T g values below 373 K (100 °C) were obtained for alloys with x = 55 to 75.5. The alloys with x = 45 to 70 exhibited a high stabilization of supercooled liquid and a high GFA, and the supercooled liquid region and critical sample diameter for glass formation were in the range of 31 K to 50 K and 2 to 5 mm, respectively. The compressive fracture strength ( σ c,f ), Young's modulus ( E), and Vicker's hardness ( H v ) of the bulk metallic glasses (BMGs) decreased with increasing Au content. A linear correlation between Au concentration and the characteristic temperature, i.e., T g and T x , and mechanical properties, i.e., σ c,f , E, and H v , as well as electrical resistivity can be found in the BMGs, which will be helpful for the composition design of the desirable Au-based BMGs with tunable physical properties.

  13. The unusual effect of AgNO3 on the growth of Au nanostructures and their catalytic performance

    NASA Astrophysics Data System (ADS)

    Li, Xingliang; Yang, Yun; Zhou, Guangju; Han, Shuhua; Wang, Wenfang; Zhang, Lijie; Chen, Wei; Zou, Chao; Huang, Shaoming

    2013-05-01

    Au nanostructures attract much attention due to their potential applications in many fields. The controlled synthesis is critical to their properties modulation and applications. AgNO3-assisted synthesis is a widely used method for controllably preparing Au nanostructures in aqueous system. Herein, the effect of AgNO3 on the growth of Au nanostructures in polyol is studied. We observe an unusual effect that AgNO3 can induce the formation of pentatwinned Au nanostructures (nanorods and decahedra) and block the growth of Au nanorods. More interestingly, this blocking effect can be tuned through controlling the amount of AgNO3. A moderate amount of AgNO3 facilitates the formation of Au nanorods. A large amount of AgNO3 completely blocks the growth of nanorods and favors the formation of high quality decahedra (decahedra can be considered as nanorods with 0 nm longitudinal length). Besides, this blocking effect also allows preparation of different high-index-faceted Au nanobipyramids. These prepared Au nanostructures further serve as starting templates to fabricate other heterostructured Au/Ag nanomaterials, such as Ag-Au-Ag segmental nanorods, Au@Ag core-shelled nanostructures. The prepared nanostructures exhibit size- and structure-dependent catalytic performance in the reduction of p-nitrophenol to p-aminophenol by sodium borohydride.Au nanostructures attract much attention due to their potential applications in many fields. The controlled synthesis is critical to their properties modulation and applications. AgNO3-assisted synthesis is a widely used method for controllably preparing Au nanostructures in aqueous system. Herein, the effect of AgNO3 on the growth of Au nanostructures in polyol is studied. We observe an unusual effect that AgNO3 can induce the formation of pentatwinned Au nanostructures (nanorods and decahedra) and block the growth of Au nanorods. More interestingly, this blocking effect can be tuned through controlling the amount of AgNO3. A moderate

  14. Ru-Ag and Ru-Au dicarbene complexes from an abnormal carbene ruthenium system.

    PubMed

    Bitzer, Mario J; Pöthig, Alexander; Jandl, Christian; Kühn, Fritz E; Baratta, Walter

    2015-07-14

    Reaction of [Ru(OAc)2(PPh3)2] with a P-functionalized imidazolium bromide easily affords a cationic abnormal carbene Ru system. Metalation with Ag2O yields a Ru-Ag complex containing an anionic dicarbene ligand, while subsequent transmetalation with Au(tht)Cl leads to the corresponding Ru-Au system. The bimetallic complexes were characterized by single crystal X-ray diffraction and are the first examples of complexes bearing anionic dicarbene ligands connecting two different d-block elements.

  15. Effect of Annealing Twins on Electromigration in Ag-8Au-3Pd Bonding Wires

    NASA Astrophysics Data System (ADS)

    Chuang, Tung-Han; Wang, Hsi-Ching; Chuang, Chien-Hsun; Lee, Jun-Der; Tsai, Hsing-Hua

    2013-03-01

    An innovative Ag-8Au-3Pd bonding wire with a high twin density has been produced. The grain size of this annealing-twinned wire changes moderately during electrical stressing, unlike that of the conventional grained wire, which increases drastically and even leads to a bamboo structure. In addition, the durability against electromigration of the annealing-twinned Ag-8Au-3Pd alloy wire is higher than that of the conventional grained wire. This higher durability can be ascribed to the surface reconstruction of a stepwise morphology and slow grain growth resulting from the abundance of annealing twins in this wire.

  16. Ternary Solid Phase Equilibria in the Systems (Ag,In,Au)-(Cd,He)-Te

    DTIC Science & Technology

    1988-07-22

    thermochemnical data. In closed thermodynamic systems Ag,In, and Au were shown to be stable with respect to stoichiometric CdTe and Ag, In reactive towards...compositions within Codes Avail and/or 2lit Specilal the six ternary systems. Thermodynamic calculations were performed using the data collected in... Thermodynamic Properties of the Elements, (Amer.Chem.Soc., Washington, D.C., 1956) 11) John H. Pugh, Masters Thesis, UCLA, 1986-unpublished. 12) W.G

  17. Core-shell of FePt@SiO2-Au magnetic nanoparticles for rapid SERS detection

    NASA Astrophysics Data System (ADS)

    Hardiansyah, Andri; Chen, An-Yu; Liao, Hung-Liang; Yang, Ming-Chien; Liu, Ting-Yu; Chan, Tzu-Yi; Tsou, Hui-Ming; Kuo, Chih-Yu; Wang, Juen-Kai; Wang, Yuh-Lin

    2015-10-01

    In this study, multifunctional hybrid nanoparticles composed of iron platinum (FePt), silica (SiO2), and gold nanoparticles (AuNPs) had been developed for surface-enhanced Raman scattering (SERS) application. Core-shell structure of SiO2 and FePt nanoparticles (FePt@SiO2) was fabricated through sol-gel process and then immobilized gold nanoparticles onto the surface of FePt@SiO2, which displays huge Raman enhancement effect and magnetic separation capability. The resulting core-shell nanoparticles were subject to evaluation by transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDX), zeta potential measurement, and X-ray photoelectron spectroscopy (XPS). TEM observation revealed that the particle size of resultant nanoparticles displayed spherical structure with the size ~30 nm and further proved the successful immobilization of Au onto the surface of FePt@SiO2. Zeta potential measurement exhibited the successful reaction between FePt@SiO2 and AuNPs. The rapid SERS detection and identification of small biomolecules (adenine) and microorganisms (gram-positive bacteria, Staphylococcus aureus) was conducted through Raman spectroscopy. In summary, the novel core-shell magnetic nanoparticles could be anticipated to apply in the rapid magnetic separation under the external magnetic field due to the core of the FePt superparamagnetic nanoparticles and label-free SERS bio-sensing of biomolecules and bacteria.

  18. Aptamer-based electrochemical biosensor by using Au-Pt nanoparticles, carbon nanotubes and acriflavine platform.

    PubMed

    Beiranvand, Zeinab Sahraei; Abbasi, Amir Reza; Dehdashtian, Sara; Karimi, Ziba; Azadbakht, Azadeh

    2017-02-01

    Herein, an ultrasensitive electrochemical aptasensor for quantitative detection of bisphenol A (BPA) was fabricated based on a novel signal amplification strategy. This aptasensor was developed by electrodeposition of gold-platinum nanoparticles (Au-PtNPs) on glassy carbon (GC) electrode modified with acid-oxidized carbon nanotubes (CNTs-COOH). In this protocol, acriflavine (ACF) was covalently immobilized at the surface of glassy carbon electrode modified with Au-PtNPs/CNTs-COOH nanocomposite. Attachment of BPA-aptamer at the surface of modified electrode was performed through the formation of phosphoramidate bonds between the amino group of ACF and phosphate group of the aptamer at 5'end. By interaction of BPA with the aptamer, the conformational of aptamer was changed which lead to retarding the interfacial electron transfer of ACF as a probe. Sensitive quantitative detection of BPA was carried out by monitoring the decrease of differential pulse voltammetric (DPV) responses of ACF peak current with increasing the BPA concentration. The resultant aptasensor exhibited good specificity, stability and reproducibility, indicating that the present strategy was promising for broad potential application.

  19. Pressure–volume Equation of State of FeAu and FePt

    SciTech Connect

    Petrovic, C.; Ko, Y.H.; Kim, K.J.; Han, C.K.; Hu, R.; Lee, H.H.; Lee, Y.

    2009-12-01

    X-ray diffraction patterns of FeAu and FePt have been measured at pressures up to {approx}55 GPa with good signal-to-noise ratio and high resolution using synchrotron radiation. Rietveld analysis has been performed. The structure of FeAu is cubic in space group Fm{bar 3}m with a lattice parameter a = 3.9634 {+-} 0.0012 {angstrom}. A third-order Birch-Murnaghan equation of state fit to the experimental data yields V{sub 0} = 62.26 {+-} 0.05 {angstrom}{sup 3}, with a B{sub 0} of 180.6 {+-} 4.7 GPa and B'{sub 0} = 3.5 {+-} 0.3. The structure of FePt is tetragonal in space group P4/mmm with lattice parameters a = b = 2.6748 {+-} 0.0005 {angstrom} and c = 3.7375 {+-} 0.0008 {angstrom}. A third-order Birch-Murnaghan equation of state fit to the experimental data yields V{sub 0} = 26.74 {+-} 0.01 {angstrom}{sup 3}, with a B{sub 0} of 264.1 {+-} 9.8 GPa and B'{sub 0} = 5.0 {+-} 0.7.

  20. In vitro biocompatibility of novel Au-Pt-based metal-ceramic alloys.

    PubMed

    Johnson, Anthony; Shiraishi, Takanobu; Hurrell-Gillingham, Kathryn

    2011-09-01

    The aim of this research was to evaluate the effect of individual metallic elements within experimental Au-Pt-based metal-ceramic alloys on in vitro biocompatibility. A binary Au-10 at.% Pt alloy (AP10) was designed as a parent alloy. Six ternary AP10-X (X = In/Fe/Sn/Zn) alloys and four quaternary (AP10-In2)-Y (Y = Fe/Sn/Zn) with different compositions were cast into square plates with size 10X10X0.5 mm(3) and subjected to porcelain-firing thermal cycling. A commercial alloy was used as a control. In vitro biocompatibility was investigated using L929 murine aneuploid fibrosarcoma cell line. The test samples and cells were incubated at 37°C in a 5% CO(2) atmosphere for 72 h. Alamar™ Blue Assay was carried out to determine the respiratory viability of cultures maintained in the presence of the different materials. The cell only control showed significantly higher levels of cell viability than all six of the ternary alloys and two of the four quaternary alloys, (AP10-In2)-Zn2.1 and (AP10-In2)-Sn1.0 (P < 0.05). The quaternary alloys showed slightly higher levels of cell viability than the ternary alloys, with the exception of AP10-Sn0.9. No statistical differences were seen between the ternary and quaternary alloy groups. Acceptable cell viability was observed on the surfaces of all the alloys.

  1. Assemblies of silicate sol-gel matrix encapsulated core/shell Au/Ag nanoparticles: interparticles surface plasmon coupling

    NASA Astrophysics Data System (ADS)

    Manivannan, Shanmugam; Ramaraj, Ramasamy

    2012-06-01

    Cluster-like assemblies of bimetal core/shell Au/Ag nanoparticles were prepared. The Ag shell was deposited on the preformed Au nanoparticles using two different types of preformed Au nanoparticles in the presence of EDAS silane monomer, one stabilized by citrate and other by β-cyclodextrin. The Ag shell was deposited on the preformed Au nanoparticles by the reduction of Ag+ ions by β-cyclodextrin and EDAS silane composite. Interestingly, productive Ag shell deposition occurred only on the β-cyclodextrin-stabilized Au nanoparticles and led to the assembly formation, whereas aggregation occurred with the citrate-stabilized Au nanoparticles. The average particle size of the core/shell Au/Ag nanoparticles was found to be 6.5 nm. Spectral features of this assembly of core/shell Au/Ag nanoparticles resembled the longitudinal surface plasmon resonance behavior of Au nanorod-like structures arising from the interparticles surface plasmon coupling. The assemblies so prepared were characterized by uv-vis absorption spectroscopy and high-resolution transmission electron microscopy.

  2. Effect of Ag addition to L1{sub 0} FePt and L1{sub 0} FePd films grown by molecular beam epitaxy

    SciTech Connect

    Tokuoka, Y.; Seto, Y.; Kato, T.; Iwata, S.

    2014-05-07

    L1{sub 0} ordered FePt-Ag (5 nm) and FePd-Ag (5 nm) films were grown on MgO (001) substrate at temperatures of 250–400 °C by using molecular beam epitaxy method, and their crystal and surface structures, perpendicular magnetic anisotropies and Curie temperatures were investigated. In the case of FePt-Ag, Ag addition with the amount of 10–20 at. % was effective to promote L1{sub 0} ordering and granular growth, resulting in the increase of the perpendicular magnetic anisotropy and coercivity of the FePt-Ag films. On the other hand, in the case of FePd-Ag, Ag addition changed the surface morphology from island to continuous film associated with the reductions of its coercivity and perpendicular anisotropy. The variations of lattice constants and Curie temperature with Ag addition were significantly different between FePt-Ag and FePd-Ag. For FePd-Ag, the c and a axes lattice spacings and Curie temperature gradually changed with increasing Ag content, while they unchanged for FePt-Ag. These results suggest the possibility of the formation of FePdAg alloy in FePd-Ag, while Ag segregation in FePt-Ag.

  3. Au and Pt co-loaded g-C3N4 nanosheets for enhanced photocatalytic hydrogen production under visible light irradiation

    NASA Astrophysics Data System (ADS)

    Liang, Shijing; Xia, Yuzhou; Zhu, Shuying; Zheng, Shan; He, Yunhui; Bi, Jinhong; Liu, Minghua; Wu, Ling

    2015-12-01

    Au and Pt have been considered as the active co-catalysts for the enhanced photocatalytic activity of carbon nitride. However, the effects of Au and Pt co-loading on the surface chemical states and activity of carbon nitride were rarely discussed. In this work, a series of carbon nitride samples with Au and Pt loading have been successfully prepared by a traditional photodeposition method. The as-prepared samples have been characterized in detail. The activities of the samples were evaluated by water splitting into hydrogen under visible light irradiation. Results show that the integrity of characteristic structure of carbon nitride is retained before and after deposited Au and Pt. Interestingly, when Pt is firstly loaded on the surface of carbon nitride, Pt species are in the form of PtO with small particle size. While if Pt is loaded on the surface of Au/carbon nitride, the Pt nanoparticles (NPs) are metallic Pt NPs with relatively large particle size. For Au, it is insensitive to the loading order. Among all Au deposited samples, Au species are in the form of metallic Au. Furthermore, the activities of the Au and Pt co-loaded samples exhibited much higher than those of single co-catalyst deposited samples and pure carbon nitride. The dual co-catalysts in the form of metallic state are more active to increase the performance of water splitting over carbon nitride. The enhanced activity of carbon nitride by co-deposited Au and Pt could be well explained by the photoabsorption performance and the separation of photogenerated electron and holes.

  4. Two-Dimensional Au-Nanoprism/Reduced Graphene Oxide/Pt-Nanoframe as Plasmonic Photocatalysts with Multiplasmon Modes Boosting Hot Electron Transfer for Hydrogen Generation.

    PubMed

    Lou, Zaizhu; Fujitsuka, Mamoru; Majima, Tetsuro

    2017-02-16

    Two-dimensional Au-nanoprism/reduced graphene oxide (rGO)/Pt-nanoframe was synthesized as plasmonic photocatalyt, exhibiting activity of photocatalytic hydrogen generation greater than those of Au-nanorod/rGO/Pt-nanoframe and metallic plasmonic photocatalyst Pt-Au. The single-particle plasmonic photoluminescence study demonstrated that Au-nanorod has only a longitudinal plasmon resonance mode for hot electron transfer to rGO, while Au-nanoprism has in-plane dipole and multipole surface plasmon resonance modes for hot electron transfer, leading to highly efficient charge separation for hydrogen generation.

  5. The population genetic structure of Rhizoctonia solani AG-3PT from potato in the Colombian Andes.

    PubMed

    Ferrucho, Rosa L; Ceresini, Paulo C; Ramirez-Escobar, Ursula M; McDonald, Bruce A; Cubeta, Marc A; García-Domínguez, Celsa

    2013-08-01

    The soilborne fungus Rhizoctonia solani anastomosis group 3 (AG-3PT) is a globally important potato pathogen. However, little is known about the population genetic processes affecting field populations of R. solani AG-3PT, especially in the South American Colombian Andes, which is near the center of diversity of the two most common groups of cultivated potato, Solanum tuberosum and S. phureja. We analyzed the genetic structure of 15 populations of R. solani AG-3PT infecting potato in Colombia using 11 simple-sequence repeat (SSR) markers. In total, 288 different multilocus genotypes were identified among 349 fungal isolates. Clonal fractions within field populations were 7 to 33%. RST statistics indicated a very low level of population differentiation overall, consistent with high contemporary gene flow, though moderate differentiation was found for the most distant southern populations. Genotype flow was also detected, with the most common genotype found widely distributed among field populations. All populations showed evidence of a mixed reproductive mode, including both asexual and sexual reproduction, but two populations displayed evidence of inbreeding.

  6. Isolation and structural characterization of a silver-platinum nanocluster, Ag4Pt2(DMSA)4

    NASA Astrophysics Data System (ADS)

    Pedicini, Anthony; Reber, Arthur; Biltek, Scott; Sen, Ayusman; Khanna, Shiv

    2015-03-01

    Cluster assembled materials offer an attractive prospect of making nanoscale materials with tunable characteristics. Here, we report the synthesis, isolation, and characterization of the ligand-protected bimetallic cluster, Ag4Pt2(DMSA)4 (DMSA =meso-2,3,-dimercaptosuccinic acid) and its analogue, Ag4Pd2(DMSA)4. The procedure is similar to the one employed previously for the synthesis of Ag4Ni4(DMSA)4. Theoretical studies show that the Pt and Ni atoms are square planar in configuration. Furthermore, the dependence on the optical spectrum due to congener replacement of the transition metal is highlighted. Since the crystal field splitting of 5d orbitals is typically larger than that for 3d orbitals, we show the Pt-based cluster has an optical spectrum that is significantly blue shifted as compared to the Ni-based cluster. This work was supported by an Air Force Office of Scientific Research (AFOSR) Basic Research Initiative Grant FA9550-12-1-0481.

  7. Ultra-thin L1{sub 0}-FePt for perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves

    SciTech Connect

    Ho, Pin; Chow, Gan Moog; Chen, Jing-Sheng; Han, Guchang; He, Kaihua

    2014-05-07

    Perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves (PSVs) with ultra-thin L1{sub 0}-FePt alloy free layer possessing high anisotropy and thermal stability have been fabricated and studied. The thickness of the L1{sub 0}-FePt layer was varied between 2 and 4 nm. The PSV became increasingly decoupled with reduced L1{sub 0}-FePt thickness due to the larger difference between the coercivity of the L1{sub 0}-FePt and [Co/Pd]{sub 30} films. The PSV with an ultra-thin L1{sub 0}-FePt free layer of 2 nm displayed a high K{sub u} of 2.21 × 10{sup 7} ergs/cm{sup 3}, high thermal stability of 84 and a largest giant magnetoresistance of 0.54%.

  8. TiO2 coated Au/Ag nanorods with enhanced photocatalytic activity under visible light irradiation.

    PubMed

    Zhou, Na; Polavarapu, Lakshminarayana; Gao, Nengyue; Pan, Yanlin; Yuan, Peiyan; Wang, Qing; Xu, Qing-Hua

    2013-05-21

    A facile method was used to prepare uniform Au NR/TiO2 and Au/Ag NR/TiO2 core-shell composite nanoparticles. Au/Ag NR/TiO2 nanoparticles were found to display significantly enhanced visible light photo-catalytic activity compared to Au NR/TiO2 and the commercially available TiO2 nanoparticles. The enhancement mechanism was ascribed to injection of hot electrons of photo-excited Au/Ag NRs to TiO2, which was confirmed by 633 nm laser induced reduction of silver ions on the surface of Au/Ag NR/TiO2 composite nanoparticles.

  9. Resistive switching mechanism of Ag/ZrO2:Cu/Pt memory cell

    NASA Astrophysics Data System (ADS)

    Long, Shibing; Liu, Qi; Lv, Hangbing; Li, Yingtao; Wang, Yan; Zhang, Sen; Lian, Wentai; Zhang, Kangwei; Wang, Ming; Xie, Hongwei; Liu, Ming

    2011-03-01

    Resistive switching mechanism of zirconium oxide-based resistive random access memory (RRAM) devices composed of Cu-doped ZrO2 film sandwiched between an oxidizable electrode and an inert electrode was investigated. The Ag/ZrO2:Cu/Pt RRAM devices with crosspoint structure fabricated by e-beam evaporation and e-beam lithography show reproducible bipolar resistive switching. The linear I- V relationship of low resistance state (LRS) and the dependence of LRS resistance ( R ON) and reset current ( I reset) on the set current compliance ( I comp) indicate that the observed resistive switching characteristics of the Ag/ZrO2:Cu/Pt device should be ascribed to the formation and annihilation of localized conductive filaments (CFs). The physical origin of CF was further analyzed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). CFs were directly observed by cross-sectional TEM. According to EDS and elemental mapping analysis, the main chemical composition of CF is determined by Ag atoms, coming from the Ag top electrode. On the basis of these experiments, we propose that the set and reset process of the device stem from the electrochemical reactions in the zirconium oxide under different external electrical stimuli.

  10. Patterned nanostructure in AgCo/Pt/MgO(001) thin films

    NASA Astrophysics Data System (ADS)

    Liu, Zhi-Rong; Gao, Huajian; Chen, L. Q.; Cho, Kyeongjae

    2003-07-01

    The formation of a patterned nanostructure in an AgCo/Pt/MgO(001) thin film is simulated by a technique of combining molecular dynamics and phase-field theory. The dislocation (strain) network existing in Pt/MgO is used as a template whose pattern is transferred to the AgCo phase in spinodal decomposition, resulting in regular arrays of Co islands that are attracted by the dislocations. The influence of various factors, such as the component concentration and film thickness, is studied. It is found that the spinodal decomposition of AgCo in this system is mainly characterized by a competition between a surface-directed layer structure and the strain-induced patterned structure, where the patterned Ag-Co structure only dominates in a small range near the interface (less than ten atomic layers). However, if the interlayer diffusion can be minimized by controlling film growth conditions, it is shown that the patterned structure can be formed throughout the entire film.

  11. Ag@Au concave cuboctahedra: A unique probe for monitoring Au-catalyzed reduction and oxidation reactions by surface-enhanced Raman spectroscopy

    DOE PAGES

    Zhang, Jiawei; Winget, Sarah A.; Wu, Yiren; ...

    2016-01-26

    In this paper, we report a facile synthesis of Ag@Au concave cuboctahedra by titrating aqueous HAuCl4 into a suspension of Ag cuboctahedra in the presence of ascorbic acid (AA), NaOH, and poly(vinylpyrrolidone) (PVP) at room temperature. Initially, the Au atoms derived from the reduction of Au3+ by AA are conformally deposited on the entire surface of a Ag cuboctahedron. Upon the formation of a complete Au shell, however, the subsequently formed Au atoms are preferentially deposited onto the Au{100} facets, resulting in the formation of a Ag@Au cuboctahedron with concave structures at the sites of {111} facets. The concave cuboctahedramore » embrace excellent SERS activity that is more than 70-fold stronger than that of the original Ag cuboctahedra at an excitation wavelength of 785 nm. The concave cuboctahedra also exhibit remarkable stability in the presence of an oxidant such as H2O2 because of the protection by a complete Au shell. These two unique attributes enable in-situ SERS monitoring of the reduction of 4-nitrothiophenol (4-NTP) to 4-aminothiophenol (4-ATP) by NaBH4 through a 4,4'-dimercaptoazobenzene (trans-DMAB) intermediate and the subsequent oxidation of 4-ATP back to trans-DMAB upon the introduction of H2O2.« less

  12. Ag@Au concave cuboctahedra: A unique probe for monitoring Au-catalyzed reduction and oxidation reactions by surface-enhanced Raman spectroscopy

    SciTech Connect

    Zhang, Jiawei; Winget, Sarah A.; Wu, Yiren; Su, Dong; Sun, Xiaojun; Xie, Zhao -Xiong; Qin, Dong

    2016-01-26

    In this paper, we report a facile synthesis of Ag@Au concave cuboctahedra by titrating aqueous HAuCl4 into a suspension of Ag cuboctahedra in the presence of ascorbic acid (AA), NaOH, and poly(vinylpyrrolidone) (PVP) at room temperature. Initially, the Au atoms derived from the reduction of Au3+ by AA are conformally deposited on the entire surface of a Ag cuboctahedron. Upon the formation of a complete Au shell, however, the subsequently formed Au atoms are preferentially deposited onto the Au{100} facets, resulting in the formation of a Ag@Au cuboctahedron with concave structures at the sites of {111} facets. The concave cuboctahedra embrace excellent SERS activity that is more than 70-fold stronger than that of the original Ag cuboctahedra at an excitation wavelength of 785 nm. The concave cuboctahedra also exhibit remarkable stability in the presence of an oxidant such as H2O2 because of the protection by a complete Au shell. These two unique attributes enable in-situ SERS monitoring of the reduction of 4-nitrothiophenol (4-NTP) to 4-aminothiophenol (4-ATP) by NaBH4 through a 4,4'-dimercaptoazobenzene (trans-DMAB) intermediate and the subsequent oxidation of 4-ATP back to trans-DMAB upon the introduction of H2O2.

  13. Fabrication of two-dimensional Au at FePt core-shell nanoparticle arrays by photochemical metal deposition

    SciTech Connect

    Haertling, Thomas; Uhlig, Tino; Olk, Phillip; Eng, Lukas M.; Seidenstuecker, Axel; Wiedwald, Ulf; Han Luyang; Plettl, Alfred; Ziemann, Paul; Bigall, Nadja C.; Eychmueller, Alexander

    2010-05-03

    In this report, we experimentally demonstrate that single platinum nanoparticles exhibit the necessary catalytic activity for the optically induced reduction of H[AuCl{sub 4}] complexes to elemental gold. This finding is exploited for the parallel Au encapsulation of FePt nanoparticles arranged in a self-assembled two-dimensional array. Magnetic force microscopy reveals that the thin gold layer formed on the FePt particles leads to a strongly increased long-term stability of their magnetization under ambient conditions.

  14. Phase equilibria in the Ag-Au-In system at 500°C

    NASA Astrophysics Data System (ADS)

    Ptashkina, E. A.; Romanova, A. G.; Pavlenko, A. S.; Kabanova, E. G.; Kuznetsov, V. N.

    2017-02-01

    Phase equilibria in Ag-Au-In system at 500°C are investigated by means of electron microscopy, electron probe microanalysis, and X-ray powder diffraction. The part of the system's isothermal cross section with an indium content of up to 50 at % is constructed.

  15. Theoretical investigation on reactivity of Ag and Au atoms toward CS2 in gas phase

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Yang, Ling; Tian, An-Min; Wong, Ning-Bew

    2008-02-01

    The reaction mechanisms of Ag and Au atoms with CS2 on both doublet and quartet potential energy surfaces (PESs) have been investigated using UBPW91 and UCCSD(T) methods. The two studied reactions proceed via a similar insertion-elimination mechanism instead of a direct abstract mechanism. The reaction Ag + CS2 --> SAgCS is endothermic by about 21E0 kcal/mol. But another reaction Au + CS2 --> SAuCS is slightly exothermic by about 8.8 kcal/mol, which is different from the previous theoretical prediction. In the overall reactions, the rate-determining step is found to be the C-S bond cleavage step with a high-activation barrier of about 40 kcal/mol. The calculated vibration frequencies are in good agreement with the experiment values and show that the BPW91 method is very good for the calculation of small molecules containing Ag and Au. The reactivity of the two atoms toward CS2 is compared with those of the first-row transition-metal atoms. The present study provides a detailed picture of the C-S bond activation and cleavage in carbon disulfide mediated by second and the third row transition-metal atoms Ag and Au.

  16. Investigation of the ratio of proton-stopping cross sections in Ag and Au

    SciTech Connect

    Semrad, D.; Golser, R.

    1987-06-01

    Knowledge of the ratio of stopping cross sections may help in determining best values from measurements. The case of Ag and Au is discussed, where theoretical considerations show that this ratio always has a value smaller than 1. This is confirmed experimentally for proton energies larger than 70 keV, in contradiction to all published stopping-power tabulations.

  17. Collagen-chitosan scaffold modified with Au and Ag nanoparticles: Synthesis and structure

    NASA Astrophysics Data System (ADS)

    Rubina, M. S.; Kamitov, E. E.; Zubavichus, Ya. V.; Peters, G. S.; Naumkin, A. V.; Suzer, S.; Vasil'kov, A. Yu.

    2016-03-01

    Nowadays, the dermal biomimetic scaffolds are widely used in regenerative medicine. Collagen-chitosan scaffold one of these materials possesses antibacterial activity, good compatibility with living tissues and has been already used as a wound-healing material. In this article, collagen-chitosan scaffolds modified with Ag and Au nanoparticles have been synthesized using novel method - the metal-vapor synthesis. The nanocomposite materials are characterized by XPS, TEM, SEM and synchrotron radiation-based X-ray techniques. According to XRD data, the mean size of the nanoparticles (NPs) is 10.5 nm and 20.2 nm in Au-Collagen-Chitosan (Au-CollCh) and Ag-Collagen-Chitosan (Ag-CollCh) scaffolds, respectively in fair agreement with the TEM data. SAXS analysis of the composites reveals an asymmetric size distribution peaked at 10 nm for Au-CollCh and 25 nm for Ag-CollCh indicative of particle's aggregation. According to SEM data, the metal-carrying scaffolds have layered structure and the nanoparticles are rather uniformly distributed on the surface material. XPS data indicate that the metallic nanoparticles are in their unoxidized/neutral states and dominantly stabilized within the chitosan-rich domains.

  18. Structural properties of Au and Ag nanoclusters embedded in MgO

    NASA Astrophysics Data System (ADS)

    van Huis, M. A.; Fedorov, A. V.; van Veen, A.; Falub, C. V.; Eijt, S. W. H.; Kooi, B. J.; De Hosson, J. Th. M.; Hibma, T.; Zimmerman, R. L.

    2002-05-01

    Gold and silver nanoclusters embedded in MgO were created by means of ion implantation of 1.0 MeV Au or 600 keV Ag ions to a dose of 10 16 cm -2 into single crystals of MgO(1 0 0) and subsequent annealing at 1473 K for a period of 22 h. The structural properties of the nanoclusters were characterised by optical absorption spectroscopy (OAS), high-resolution X-ray diffraction (XRD) and cross-sectional transmission electron microscopy (XTEM). Nanocluster sizes are estimated using three different methods: using the Doyle formula for the broadening of the optical absorption peak associated with Mie plasmon resonance; using the Scherrer formula for the broadening of the Au and Ag XRD peaks, and from direct observation of TEM images. For the Au clusters, the methods are in excellent agreement with mean cluster sizes of 4-5 nm. For the Ag clusters, the optical Doyle method yields a mean nanocluster size of 5 nm while the XRD and XTEM methods yield 10-11 nm. The XRD and XTEM results reveal a cube-on-cube orientation relationship of the Au and Ag nanoclusters with respect to the MgO matrix.

  19. Asymmetric AgPd-AuNR heterostructure with enhanced photothermal performance and SERS activity.

    PubMed

    Zhang, Han; Liu, Zeke; Kang, Xiaolin; Guo, Jun; Ma, Wanli; Cheng, Si

    2016-01-28

    Most as-reported nanostructures through galvanic replacement reactions are still symmetric hollow structures, until now. Asymmetric structures fabricated through a galvanic replacement reaction have been rarely reported. However, asymmetric heterostructures can generally lead to new intriguing properties through asymmetric synergistic coupling. Here, we report a simple synthesis of an asymmetric one-ended AgPd bimetal on Au nanorods (AuNR) by combining a galvanic replacement reaction with an Ostwald ripening process. The morphological evolution from a nanodumbbell to a dandelion structure is thoroughly investigated. The unique asymmetric AgPd-AuNR heterostructures possess the required plasmonic performance and avoid strong damping caused by the poor plasmonic metal Pd, resulting in a superior photothermal heating performance and enhanced SERS sensitivity for in situ monitoring of a catalytic reaction compared with the symmetric counterparts.

  20. SERS-active Au@Ag nanorod dimers for ultrasensitive dopamine detection.

    PubMed

    Tang, Lijuan; Li, Si; Han, Fei; Liu, Liqiang; Xu, Liguang; Ma, Wei; Kuang, Hua; Li, Aike; Wang, Libing; Xu, Chuanlai

    2015-09-15

    Dopamine (DA) is a neurotransmitter which plays a key role in the life science. Self-assembled Au@Ag nanorod dimers based on aptamers were developed for ultrasensitive dopamine detection. The electronic field was significantly enhanced by the addition of silver shell coating on the surface of Au NR dimer. The results displayed that Au@Ag NR dimers were ideal building blocks for constructing the SERS substrates with prominent Raman enhancement effects. It was found that with using this Surface-enhanced Raman scattering (SERS)-encoded this sensing system, a limit of detection of 0.006 pM and a wide linear range of 0.01-10 pM for dopamine detection were obtained. Our work open up a new avenue for the diagnosis and drug-discovery programs.

  1. Evidence for rapid epithermal mineralization and coeval bimodal volcanism, Bruner Au-Ag property, NV USA

    NASA Astrophysics Data System (ADS)

    Baldwin, Dylan

    The character of Au-Ag mineralization and volcanic/hydrothermal relationships at the underexplored Miocene-age Bruner low-sulfidation epithermal Au-Ag deposit are elucidated using field and laboratory studies. Bruner is located in central Nevada within the Great Basin extensional province, near several major volcanic trends (Western Andesite, Northern Nevada Rift) associated with world-class Miocene-age epithermal Au-Ag provinces. Despite its proximity to several >1 Moz Au deposits, and newly discovered high-grade drill intercepts (to 117 ppm Au/1.5m), there is no published research on the deposit, the style of mineralization has not been systematically characterized, and vectors to mineralization remain elusive. By investigating the nature of mineralization and time-space relationships between volcanic/hydrothermal activity, the deposit has been integrated into a regional framework, and exploration targeting improved. Mineralization occurs within narrow quartz + adularia +/- pyrite veins that manifest as sheeted/stockwork zones, vein swarms, and rare 0.3-2 m wide veins hosted by two generations of Miocene high-K, high-silica rhyolite flow dome complexes overlying an andesite flow unit. The most prominent structural controls on veining are N­striking faults and syn-mineral basalt/rhyolite dikes. Productive veins have robust boiling indicators (high adularia content, bladed quartz after calcite, recrystallized colloform quartz bands), lack rhythmic banding, and contain only 1-2 stages; these veins overprint, or occur separately from another population of barren to weakly mineralized rhythmically banded quartz-only veins. Ore minerals consist of coarse Au0.5Ag 0.5 electrum, fine Au0.7Ag0.3 electrum, acanthite, uytenbogaardtite (Ag3AuS2) and minor embolite Ag(Br,Cl). Now deeply oxidized, veins typically contain <1% pyrite/goethite + Au-Ag minerals, with trace marcasite and microscopic Fe-poor sphalerite. Property-scale K-feldspar alteration related to a pre

  2. Cyclic voltammetry and near edge X-ray absorption fine structure spectroscopy at the Ag L3-edge on electrochemical halogenation of Ag layers on Au(111)

    NASA Astrophysics Data System (ADS)

    Endo, Osamu; Nakamura, Masashi

    2011-05-01

    One to three layers of Ag grown on a Au(111) electrode were studied by cyclic voltammetry in chloride and bromide solutions and by ex-situ near-edge X-ray absorption fine structure spectroscopy at the Ag L3-edge (Ag L3-NEXAFS). The one and two layers obtained by underpotential deposition exhibited reduced intensity at the absorption edge in the Ag L3-NEXAFS spectra, which suggests the gain of d-electrons in these layers. The cyclic voltammograms and the Ag L3-NEXAFS spectra indicate that the second and third layers of Ag halogenated at positive potentials, whereas the first layer remained in metallic form.

  3. Doping the cage. Re@Au11Pt and Ta@Au11Hg, as novel 18-ve trimetallic superatoms displaying a doped icosahedral golden cage.

    PubMed

    Muñoz-Castro, Alvaro

    2017-01-18

    Expanding the versatility of well defined clusters is a major concern in the design of building blocks towards functional nanostructures. W@Au12 is a prototypical binary bare superatomic cluster involving an icosahedral symmetry, which has been discussed in the literature, precluding the proposal of several endohedral d-block and f-block element structures within a golden cage. Here we pursue the construction of related trimetallic clusters, which has been explored to a lesser extent. Our results expose the great advantages of involving heterocages in the superatom approach, unraveling Re@Au11Pt and Ta@Au11Hg as novel trimetallic candidates. Re@Au11Pt exhibits an electron-deficient element in the cage, and an endohedral atom with an extra electron. In contrast, Ta@Au11Hg is conceived as having an icosahedral cage with an extra electron, and an electron-deficient endohedral element. These new clusters follow the eighteen valence electron principle, with similar characteristics to their W@Au12 parent. This leads to stable clusters with an electronic structure formally described by the 1s(2)1p(6)1d(10) closing shell order, showing an interesting approach to design ternary superatoms, where the variation of valence electrons occurs in both cage and endohedral sites. Moreover, the cage doping appears as a useful approach to further evaluate the formation of magnetic superatoms, and also the construction of larger clusters by fusing different icosahedral structures.

  4. Au-Ag-Au double shell nanoparticles-based localized surface plasmon resonance and surface-enhanced Raman scattering biosensor for sensitive detection of 2-mercapto-1-methylimidazole.

    PubMed

    Liao, Xue; Chen, Yanhua; Qin, Meihong; Chen, Yang; Yang, Lei; Zhang, Hanqi; Tian, Yuan

    2013-12-15

    In this paper, Au-Ag-Au double shell nanoparticles were prepared based on the reduction of the metal salts HAuCl4 and AgNO3 at the surface of seed particles. Due to the synergistic effect between Au and Ag, the hybrid nanoparticles are particularly stable and show excellent performances on the detection of 2-mercapto-1-methylimidazole (methimazole). The binding of target molecule at the surface of Au-Ag-Au double shell nanoparticles was demonstrated based on both localized surface plasmon resonance (LSPR) and surface-enhanced Raman scattering (SERS) spectra. The LSPR intensity is directly proportional to the methimazole concentration in the range of 0.10-3.00×10(-7) mol L(-1). The SERS spectrum can be applied in identification of methimazole molecule. The LSPR coupled with SERS based on the Au-Ag-Au double shell nanoparticles would be very attractive for the quantitative determination and qualitative analysis of the analytes in medicines.

  5. Shape-controlled synthesis of porous AuPt nanoparticles and their superior electrocatalytic activity for oxygen reduction reaction

    PubMed Central

    Sun, Litai; Wang, Hongjing; Eid, Kamel; Wang, Liang

    2016-01-01

    Abstract Control of structure and morphology of Pt-based nanomaterials is of great importance for electrochemical energy conversions. In this work, we report an efficient one-step synthesis of bimetallic porous AuPt nanoparticles (PAuPt NPs) in an aqueous solution. The proposed synthesis is performed by a simple stirring treatment of an aqueous reactive mixture including K2PtCl4, HAuCl4, Pluronic F127 and ascorbic acid at a pH value of 1 without organic solvent or high temperature. Due to their porous structure and bimetallic composition, as-made PAuPt NPs exhibit excellent electrocatalytic activity for oxygen reduction reaction. PMID:27877858

  6. Strangeness production in Au+Au collisions at the AGS: recent results from E917.

    SciTech Connect

    Chang, W.-C.; Back, B. B.; Betts, R. R.; Britt, H. C.; Chang, W. C.; Gillitzer, A.; Henning, W. F.; Hofman, D. J.; Holzman, B.; Nanal, V.; Wuosmaa, A. H.

    1999-03-30

    Strangeness production in Au+Au collisions has been measured via the yields of K{sup +} , K{sup {minus}} at 6, 8 AGeV and of {bar {Lambda}} at 10.8 AGeV beam kinetic energy in experiment E917. By varying the collision centrally and beam energy, a systematic search for indications of new phenomena and in-medium effects under high baryon density is undertaken.

  7. Chemisorption of CO and H on Pd, Pt and Au nanoclusters: a DFT approach

    NASA Astrophysics Data System (ADS)

    Paz-Borbon, L. O.; Johnston, R. L.; Barcaro, G.; Fortunelli, A.

    2009-04-01

    We have performed a theoretical study of pure metal nanoparticles (Pd/Pt/Au) and their interaction with CO molecules and atomic hydrogen, in order to investigate chemisorption effects of relevance to catalysis by nanoparticles. First-principles density-functional local relaxations are used to investigate the effect of CO and H adsorption on six structural motifs. The results of the energetic crossover and structural deformations are analyzed in terms of the interplay between metal-metal interactions (including internal and surface stress) and CO-metal and H-metal interactions. It is found that H adsorption releases surface stress, thus favoring 5-fold symmetry motifs, whereas CO adsorption produces a flattening of the potential energy surface of the metal clusters.

  8. Au and Pt nanoparticle supported catalysts tailored for H-2 production: From models to powder catalysts

    SciTech Connect

    T. D. Nguyen-Phan; Baber, A. E.; Rodriguez, J. A.; Senanayake, S. D.

    2015-12-10

    The use of metal nanoparticles (NPs), including Au and Pt, supported over oxides has been pivotal, and is ever increasing in enabling catalytic reactions which target the production of hydrogen. We review here the most recent works pertaining to the fundamental understanding of the structure, morphology, growth, characterization, and intrinsic phenomenological properties of Au– and Pt– based catalysts that influence the reactivity and selectivity to target hydrogen production. We draw on surface science and theoretical methods of model and powder catalysts using high resolution imaging, spectroscopy, scattering experiments, and theoretical studies. Based on these insights we identify key aspects of studies of supported metal nanoparticle (NP) catalysts for several reactions. The main focus of this review is on the intersection of catalytic chemistry related to the water-gas shift (WGS), oxygenate steam reforming (OSR), and solarassisted reactions (SAR).

  9. Au and Pt nanoparticle supported catalysts tailored for H-2 production: From models to powder catalysts

    DOE PAGES

    T. D. Nguyen-Phan; Baber, A. E.; Rodriguez, J. A.; ...

    2015-12-10

    The use of metal nanoparticles (NPs), including Au and Pt, supported over oxides has been pivotal, and is ever increasing in enabling catalytic reactions which target the production of hydrogen. We review here the most recent works pertaining to the fundamental understanding of the structure, morphology, growth, characterization, and intrinsic phenomenological properties of Au– and Pt– based catalysts that influence the reactivity and selectivity to target hydrogen production. We draw on surface science and theoretical methods of model and powder catalysts using high resolution imaging, spectroscopy, scattering experiments, and theoretical studies. Based on these insights we identify key aspects ofmore » studies of supported metal nanoparticle (NP) catalysts for several reactions. The main focus of this review is on the intersection of catalytic chemistry related to the water-gas shift (WGS), oxygenate steam reforming (OSR), and solarassisted reactions (SAR).« less

  10. In situ biosynthesis of Ag, Au and bimetallic nanoparticles using Piper pedicellatum C.DC: green chemistry approach.

    PubMed

    Tamuly, Chandan; Hazarika, Moushumi; Borah, Sarat Ch; Das, Manash R; Boruah, Manas P

    2013-02-01

    The synthesis of Ag, Au and Ag-Au bimetallic nanoparticles using Piper pedicellatum C.DC leaf extract is demonstrated here. The rapid formation of stable Ag and Au nanoparticles has been found using P. pedicellatum C.DC leaf extract in aqueous medium at normal atmospheric condition. Competitive reduction of Ag(+) and Au(3+) ions present simultaneously in solution during exposure to P. pedicellatum C.DC leaf extract leads to the synthesis of bimetallic Ag-Au nanoparticles in solution. Transmission electron microscopy (TEM) analysis revealed that the Ag nanoparticles predominantly form spherical in shape with the size range of 2.0±0.5-30.0±1.2 nm. In case of Au nanoparticles, the particles are spherical in shape along with few triangular, hexagonal and pentagonal shaped nanoparticles also observed. X-ray diffraction (XRD) studies revealed that the nanoparticles were face centered cubic (fcc) in shape. Fourier transform infrared spectroscopy (FTIR) showed nanoparticles were capped with plant compounds. The chemical constituents, viz. catechin, gallic acid, courmaric acid and protocatechuic acid of the leaf extract were identified which may act as a reducing, stabilizing and capping agent. The expected reaction mechanism in the formation of Ag and Au nanoparticles is also reported.

  11. Hydroquinone-assisted synthesis of branched au-ag nanoparticles with polydopamine coating as highly efficient photothermal agents.

    PubMed

    Li, Jing; Wang, Wenjing; Zhao, Liang; Rong, Li; Lan, Shijie; Sun, Hongchen; Zhang, Hao; Yang, Bai

    2015-06-03

    Despite the success of galvanic replacement in preparing hollow nanostructures with diversified morphologies via the replacement reaction between sacrificial metal nanoparticles (NPs) seeds and less active metal ions, limited advances are made for producing branched alloy nanostructures. In this paper, we report an extended galvanic replacement for preparing branched Au-Ag NPs with Au-rich core and Ag branches using hydroquinone (HQ) as the reductant. In the presence of HQ, the preformed Ag seeds are replaceable by Au and, in turn, supply the growth of Ag branches. By altering the feed ratio of Ag seeds, HAuCl4, and HQ, the size and morphology of the NPs are tunable. Accordingly, the surface plasmon resonance absorption is tuned to near-infrared (NIR) region, making the branched NPs as potential materials in photothermal therapy. The branched NPs are further coated with polydopamine (PDA) shell via dopamine polymerization at room temperature. In comparison with bare NPs, PDA-coated branched Au-Ag (Au-Ag@PDA) NPs exhibit improved stability, biocompatibility, and photothermal performance. In vitro experiments indicate that the branched Au-Ag@PDA NPs are competitive agents for photothermal ablation of cancer cells.

  12. Pt, Au, Pd and Ru Partitioning Between Mineral and Silicate Melts: The Role of Metal Nanonuggets

    NASA Technical Reports Server (NTRS)

    Malavergne, V.; Charon, E.; Jones, J.; Agranier, A.; Campbell, A.

    2012-01-01

    The partition coefficients of Pt and other Pt Group Elements (PGE) between metal and silicate D(sub Metal-Silicate) and also between silicate minerals and silicate melts D(sub Metal-Silicate) are among the most challenging coefficients to obtain precisely. The PGE are highly siderophile elements (HSE) with D(sub Metal-Silicate) >10(exp 3) due to the fact that their concentrations in silicates are very low (ppb to ppt range). Therefore, the analytical difficulty is increased by the possible presence of HSE-rich-nuggets in reduced silicate melts during experiments). These tiny HSE nuggets complicate the interpretation of measured HSE concentrations. If the HSE micro-nuggets are just sample artifacts, then their contributions should be removed before calculations of the final concentration. On the other hand, if they are produced during the quench, then they should be included in the analysis. We still don't understand the mechanism of nugget formation well. Are they formed during the quench by precipitation from precursor species dissolved homogeneously in the melts, or are they precipitated in situ at high temperature due to oversaturation? As these elements are important tracers of early planetary processes such as core formation, it is important to take up this analytical and experimental challenge. In the case of the Earth for example, chondritic relative abundances of the HSE in some mantle xenoliths have led to the concept of the "late veneer" as a source of volatiles (such as water) and siderophiles in the silicate Earth. Silicate crystal/liquid fractionation is responsible for most, if not all, the HSE variation in the martian meteorite suites (SNC) and Pt is the element least affected by these fractionations. Therefore, in terms of reconstructing mantle HSE abundances for Mars, Pt becomes a very important player. In the present study, we have performed high temperature experiments under various redox conditions in order to determine the abundances of Pt, Au

  13. Chloroplasts-mediated biosynthesis of nanoscale Au-Ag alloy for 2-butanone assay based on electrochemical sensor

    NASA Astrophysics Data System (ADS)

    Zhang, Yixia; Gao, Guo; Qian, Qirong; Cui, Daxiang

    2012-08-01

    We reported a one-pot, environmentally friendly method for biosynthesizing nanoscale Au-Ag alloy using chloroplasts as reducers and stabilizers. The prepared nanoscale Au-Ag alloy was characterized by UV-visible spectroscopy, X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). Fourier transform infrared spectroscopy (FTIR) analysis was further used to identify the possible biomolecules from chloroplasts that are responsible for the formation and stabilization of Au-Ag alloy. The FTIR results showed that chloroplast proteins bound to the nanoscale Au-Ag alloy through free amino groups. The bimetallic Au-Ag nanoparticles have only one plasmon band, indicating the formation of an alloy structure. HR-TEM images showed that the prepared Au-Ag alloy was spherical and 15 to 20 nm in diameter. The high crystallinity of the Au-Ag alloy was confirmed by SAED and XRD patterns. The prepared Au-Ag alloy was dispersed into multiwalled carbon nanotubes (MWNTs) to form a nanosensing film. The nanosensing film exhibited high electrocatalytic activity for 2-butanone oxidation at room temperature. The anodic peak current (Ip) has a linear relationship with the concentrations of 2-butanone over the range of 0.01% to 0.075% (v/v), when analyzed by cyclic voltammetry. The excellent electronic catalytic characteristics might be attributed to the synergistic electron transfer effects of Au-Ag alloy and MWNTs. It can reasonably be expected that this electrochemical biosensor provided a promising platform for developing a breath sensor to screen and pre-warn of early cancer, especially gastric cancer.

  14. The role of ligands effect in the atomic and electronic structure of Pt55 and Au55 nanoclusters

    NASA Astrophysics Data System (ADS)

    Guedes Sobrino, Diego; Piotrowski, Maurício J.; da Silva, Juarez L. F.

    2014-03-01

    One of the greatest problems in the use of transition-metal nanoclusters in nanocatalysis is the environment effects induced by ligands, which affects the atomic and electronic properties, and hence, their reactivity, however, our atomistic understanding is far from satisfactory due to complex nature of the ligand-metal interactions. In this talk, we will report a first-principles investigation of ligand effects (PH3, SH2) on the physical and chemical properties of Pt55 and Au55 using density functional theory (FHI-aims). We found that a reduced core structure (7 - 10 , instead of 13), called LOW, is about 5.45 eV (2.00 eV) lower in energy than the icosahedron (ICO) model for Pt55 (Au55) (ΔEtot =EtotLOW -EtotICO), which is consistent with previous results. Furthermore, spin-orbit coupling does not affect the relative stability. We found that the addition of ligands, from 1 to 18, decreases ΔEtot to about - 0 . 25 (Pt55) and 0.07 eV (Au55) for 18 PH3 ligands, and - 0 . 10 (Pt55) and 0.17 eV (Au55) for SH2 ligands. We observed an average increase of about 0.70% in the bond lengths due to the ligand effects, however, it affects only slightly the coordination number. We thank the São Paulo Science Foundation (FAPESP).

  15. Near-threshold resonances in electron elastic scattering cross sections for Au and Pt atoms: identification of electron affinities

    NASA Astrophysics Data System (ADS)

    Msezane, A. Z.; Felfli, Z.; Sokolovski, D.

    2008-05-01

    The recent Regge-pole methodology has been employed together with a Thomas-Fermi type potential which incorporates the vital core-polarization interaction to investigate the near-threshold electron attachment in Au and Pt as Regge resonances. The resultant stable negative ion states are found to have the discernible characteristic of very small imaginary parts of the Regge poles, which translate into long-lived resonances. The near-threshold electron elastic total cross sections are characterized by multiple resonances from which we extract the electron affinity (EA) values through the scrutiny of the imaginary part of the relevant complex angular momentum. For the Au- and Pt- negative ions the extracted binding energies of 2.262 eV and 2.163 eV, respectively are in excellent agreement with the most recently measured EA values for Au and Pt. Ramsauer-Townsend minima, shape resonances and the Wigner threshold behaviour are identified in both Au- and Pt- ions.

  16. Electron Attachment in Low-Energy Electron Elastic Collisions with Au and Pt Atoms: Identification of Excited Anions

    NASA Astrophysics Data System (ADS)

    Msezane, A. Z.; Eure, A.; Felfli, Z.; Sokolovski, D.

    2009-11-01

    The recent Regge-pole methodology has been benchmarked [1] on the accurately measured binding energies of the excited Ge= and Sn= anions [2] through the binding energies (BEs) extracted from the Regge-pole calculated elastic total cross sections (TCSs). Here the methodology is applied together with a Thomas-Fermi type potential that incorporates the vital core polarization interaction to investigate the possibility of forming excited Au= and Pt= anions in low-energy electron elastic collisions with Au and Pt atoms. From the positions of the characteristic extremely narrow resonances in the total cross sections, we extract the binding energies of the excited Au= and Pt= anions formed as Regge resonances during the collisions. The angular life of the complexes thus formed is used to differentiate the stable excited bound states of the anions from the shape resonances [3]. The BEs for the excited Au= and Pt= anions are found to be 0.475eVand 0.543eV, respectively, challenging both theory and experiment to verify. [1] A. Msezane et al, Phys. Rev. A, Submitted (2009) [2] M. Scheer et al, Phys. Rev. A 58, 2844 (1998) [3] Z. Felfli et al, Phys. Rev. A 79, 012714 (2009)

  17. CO Sensing Performance of a Micro Thermoelectric Gas Sensor with AuPtPd/SnO₂ Catalyst and Effects of a Double Catalyst Structure with Pt/α-Al₂O₃.

    PubMed

    Goto, Tomoyo; Itoh, Toshio; Akamatsu, Takafumi; Shin, Woosuck

    2015-12-15

    The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO₂ and Pt/α-Al₂O₃ catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO₂, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the catalyst showed a CO adsorption peak on Pt and Pd, but no clear peak corresponding to the interaction between CO and Au was detected. Up to 200 °C, CO combustion was more temperature dependent than that of H₂, while H₂ combustion was activated by repeated exposure to H₂ gas during the periodic gas test. Selective CO sensing of the micro-TGS against H₂ was attempted using a double catalyst structure with 0.3-30 wt% Pt/α-Al₂O₃ as a counterpart combustion catalyst. The sensor output of the micro-TGS decreased with increasing Pt content in the Pt/α-Al₂O₃ catalyst, by cancelling out the combustion heat from the AuPtPd/SnO₂ catalyst. In addition, the AuPtPd/SnO₂ and 0.3 wt% Pt/α-Al₂O₃ double catalyst sensor showed good and selective CO detection. We therefore demonstrated that our micro-TGS with double catalyst structure is useful for controlling the gas selectivity of CO against H₂.

  18. Preparation of Ultrafine Fe-Pt Alloy and Au Nanoparticle Colloids by KrF Excimer Laser Solution Photolysis.

    PubMed

    Watanabe, Masato; Takamura, Hitoshi; Sugai, Hiroshi

    2009-03-10

    We prepared ultrafine Fe-Pt alloy nanoparticle colloids by UV laser solution photolysis (KrF excimer laser of 248 nm wavelength) using precursors of methanol solutions into which iron and platinum complexes were dissolved together with PVP dispersant to prevent aggregations. From TEM observations, the Fe-Pt nanoparticles were found to be composed of disordered FCC A1 phase with average diameters of 0.5-3 nm regardless of the preparation conditions. Higher iron compositions of nanoparticles require irradiations of higher laser pulse energies typically more than 350 mJ, which is considered to be due to the difficulty in dissociation of Fe(III) acetylacetonate compared with Pt(II) acetylacetonate. Au colloid preparation by the same method was also attempted, resulting in Au nanoparticle colloids with over 10 times larger diameters than the Fe-Pt nanoparticles and UV-visible absorption peaks around 530 nm that originate from the surface plasmon resonance. Differences between the Fe-Pt and Au nanoparticles prepared by the KrF excimer laser solution photolysis are also discussed.

  19. Corrosion properties of Ag-Au-Cu-Pd system alloys containing indium.

    PubMed

    Hattori, Masayuki; Tokizaki, Teruhiko; Matsumoto, Michihiko; Oda, Yutaka

    2010-01-01

    In this study, the corrosion resistance of Ag-Au-Cu-Pd system alloys consisting of 5 or 10 mass% indium was evaluated. Levels of element release and tarnish were determined and electrochemical measurements performed. Results were compared with those for commercial silver-palladium-gold alloy. In terms of electrochemical behavior, the transpassive potential of these experimental alloys was 168-248mV. Experimental alloys with 25 mass% Au showed similar corrosion resistance to control gold-silver-palladium alloy. Amount of released elements was 14-130microg/cm(2) at 7 days, which is in the allowable range for dental alloys. Addition of indium to Ag-Au-Cu-10mass%Pd system alloys was effective in increasing resistance to tarnish and alloys containing 10 mass% of indium showed a minimal decrease in L(*) values after immersion. These findings indicate that 25Au-37.5Ag-15Cu-10Pd-2Zn-10In-0.5Ir alloy is applicable in dental practice.

  20. Blood surface-enhanced Raman spectroscopy based on Ag and Au nanoparticles for nasopharyngeal cancer detection

    NASA Astrophysics Data System (ADS)

    Lin, Duo; Ge, Xiaosong; Lin, Xueliang; Chen, Guannan; Chen, Rong

    2016-05-01

    This study aims to evaluate and compare the utility of blood surface-enhanced Raman spectroscopy (SERS) based on Au or Ag nanoparticles (NPs), respectively, for detection of nasopharyngeal cancer (NPC). A rapid home-made Raman system was employed for SERS measurement, and high quality SERS spectra can be recorded from blood plasma samples belonging to 60 healthy volunteers and 100 NPC patients, using both metallic NPs. The spectral differences under Ag-SERS measurement between the normal and cancer groups are more significant than Au-SERS. Principal component analysis combined with linear discriminant analysis (PCA-LDA) was used for differentiating the two blood groups with a diagnostic sensitivity and specificity of 90% and 95%, respectively, using Ag-SERS method, which has almost a 20% improvement in diagnostic specificity in comparison to Au-SERS. This exploratory study demonstrates that blood SERS based on Ag NPs is capable of achieving a better diagnostic performance for NPC detection, and has promising potential for improving NPC screening.

  1. Fe-Au and Fe-Ag composites as candidates for biodegradable stent materials.

    PubMed

    Huang, Tao; Cheng, Jian; Bian, Dong; Zheng, Yufeng

    2016-02-01

    In this study, Fe-Ag and Fe-Au composites were fabricated by powder metallurgy using spark plasma sintering. Their microstructures, mechanical properties, and biocorrosion behavior were investigated by using optical microscopy, X-ray diffraction, environment scanning electronic microscopy, compressive test, electrochemical measurements, and immersion tests. Microstructure characterization indicated that the as-sintered iron-based materials obtained much finer grains than that of as-cast pure iron. Phase analysis showed that the Fe-Ag composites were composed of α-Fe and pure Ag phases, and Fe-Au composites consisted of α-Fe and Au phases. Compressive test showed that the improved mechanical strengths were obtained in as-sintered iron-based materials, among which the Fe-5 wt %Ag exhibited the best mechanical properties. The electrochemical and immersion tests revealed that the addition of Ag and Au could increase the corrosion rate of the iron matrix and change the corrosion mode into more uniform one. Based on the results of cytotoxicity evaluation, it was found that all the experimental material extracts performed no significant toxicity on the L-929 cells and EA. hy-926 cells, whereas a considerable inhibition on the proliferation of vascular smooth muscle cells was observed. The hemocompatibility tests showed that the hemolysis of all the experimental materials was within the range of 5%, which is the criteria value of biomaterials with good hemocomaptibility. The amount of platelet adhered on the surface of as-sintered iron-based materials was lower than that of as-cast pure iron, and the morphology of platelets kept smoothly spherical on the surface of all the experimental materials.

  2. Au@Ag core/shell cuboids and dumbbells: Optical properties and SERS response

    NASA Astrophysics Data System (ADS)

    Khlebtsov, Boris N.; Liu, Zhonghui; Ye, Jian; Khlebtsov, Nikolai G.

    2015-12-01

    Recent studies have conclusively shown that the plasmonic properties of Au nanorods can be finely controlled by Ag coating. Here, we investigate the effect of asymmetric silver overgrowth of Au nanorods on their extinction and surface-enhanced Raman scattering (SERS) properties for colloids and self-assembled monolayers. Au@Ag core/shell cuboids and dumbbells were fabricated through a seed-mediated anisotropic growth process, in which AgCl was reduced by use of Au nanorods with narrow size and shape distribution as seeds. Upon tailoring the reaction rate, monodisperse cuboids and dumbbells were synthesized and further transformed into water-soluble powders of PEGylated nanoparticles. The extinction spectra of AuNRs were in excellent agreement with T-matrix simulations based on size and shape distributions of randomly oriented particles. The multimodal plasmonic properties of the Au@Ag cuboids and dumbbells were investigated by comparing the experimental extinction spectra with finite-difference time-domain (FDTD) simulations. The SERS efficiencies of the Au@Ag cuboids and dumbbells were compared in two options: (1) individual SERS enhancers in colloids and (2) self-assembled monolayers formed on a silicon wafer by drop casting of nanopowder solutions mixed with a drop of Raman reporters. By using 1,4-aminothiophenol Raman reporter molecules, the analytical SERS enhancement factor (AEF) of the colloidal dumbbells was determined to be 5.1×106, which is an order of magnitude higher than the AEF=4.0×105 for the cuboids. This difference can be explained by better fitting of the dumbbell plasmon resonance to the excitation laser wavelength. In contrast to the colloidal measurements, the AEF=5×107 of self-assembled cuboid monolayers was almost twofold higher than that for dumbbell monolayers, as determined with rhodamine 6G Raman reporters. According to TEM data and electromagnetic simulations, the better SERS response of the self-assembled cuboids is due to uniform

  3. An intermetallic Au24Ag20 superatom nanocluster stabilized by labile ligands.

    PubMed

    Wang, Yu; Su, Haifeng; Xu, Chaofa; Li, Gang; Gell, Lars; Lin, Shuichao; Tang, Zichao; Häkkinen, Hannu; Zheng, Nanfeng

    2015-04-08

    An intermetallic nanocluster containing 44 metal atoms, Au24Ag20(2-SPy)4(PhC≡C)20Cl2, was successfully synthesized and structurally characterized by single-crystal analysis and density funtional theory computations. The 44 metal atoms in the cluster are arranged as a concentric three-shell Au12@Ag20@Au12 Keplerate structure having a high symmetry. For the first time, the co-presence of three different types of anionic ligands (i.e., phenylalkynyl, 2-pyridylthiolate, and chloride) was revealed on the surface of metal nanoclusters. Similar to thiolates, alkynyls bind linearly to surface Au atoms using their σ-bonds, leading to the formation of two types of surface staple units (PhC≡C-Au-L, L = PhC≡C(-) or 2-pyridylthiolate) on the cluster. The co-presence of three different surface ligands allows the site-specific surface and functional modification of the cluster. The lability of PhC≡C(-) ligands on the cluster was demonstrated, making it possible to keep the metal core intact while removing partial surface capping. Moreover, it was found that ligand exchange on the cluster occurs easily to offer various derivatives with the same metal core but different surface functionality and thus different solubility.

  4. Diffusion of Ag, Au and Cs implants in MAX phase Ti3SiC2

    SciTech Connect

    Jiang, Weilin; Henager, Charles H.; Varga, Tamas; Jung, Hee Joon; Overman, Nicole R.; Zhang, Chonghong; Gou, Jie

    2015-05-16

    MAX phases (M: early transition metal; A: elements in group 13 or 14; X: C or N), such as titanium silicon carbide (Ti3SiC2), have a unique combination of both metallic and ceramic properties, which make them attractive for potential nuclear applications. Ti3SiC2 has been considered as a possible fuel cladding material. This study reports on the diffusivities of fission product surrogates (Ag and Cs) and a noble metal Au (with diffusion behavior similar to Ag) in this ternary compound at elevated temperatures, as well as in dual-phase nanocomposite of Ti3SiC2/3C-SiC and polycrystalline CVD 3C-SiC for behavior comparisons. Samples were implanted with Ag, Au or Cs ions and characterized with various methods, including x-ray diffraction, electron backscatter diffraction, energy dispersive x-ray spectroscopy, Rutherford backscattering spectrometry, helium ion microscopy, and transmission electron microscopy. The results show that in contrast to immobile Ag in 3C-SiC, there is a significant outward diffusion of Ag in Ti3SiC2 within the dual-phase nanocomposite during Ag ion implantation at 873 K. Similar behavior of Au in polycrystalline Ti3SiC2 was also observed. Cs out-diffusion and release from Ti3SiC2 occurred during post-implantation thermal annealing at 973 K. This study suggests caution and further studies in consideration of Ti3SiC2 as a fuel cladding material for advanced nuclear reactors operating at very high temperatures.

  5. Pulsed Electrodeposition of Two-Dimensional Ag Nanostructures on Au(111)

    NASA Astrophysics Data System (ADS)

    Borissov, D.; Tsekov, R.; Freyland, W.

    2006-07-01

    One-step pulsed potential electrodeposition of Ag on Au(111) in the underpotential deposition (UPD) region has been studied in 0.5 mM Ag2SO4 + 0.1 M H2SO4 aqueous electrolyte at various pulse durations from 0.2 to 500 ms. Evolution of the deposited Ag nanostructures was followed by in situ scanning tunneling microscopy (STM) and by measurement of the respective current transients. At short pulse durations a relatively high number density (4 × 10^11 cm-2) of two-dimensional Ag clusters with a narrow size and distance distribution is observed. They exhibit a remarkably high stability characterized by a dissolution potential which lies about 200 mV more anodically than the typical potential of Ag-(1 × 1) monolayer dissolution. To elucidate the underlying nucleation and growth mechanism, two models have been considered: two-dimensional lattice incorporation and a newly developed coupled diffusion-adsorption model. The first one yields a qualitative description of the current transients, whereas the second one is in nearly quantitative agreement with the experimental data. In this model the transformation of a Ag-(3 × 3) into a Ag-(1 × 1) structure indicated in the cyclic voltammogram (peaks at 520 vs 20 mV) is taken into account.

  6. Molecular characterisation of an endornavirus from Rhizoctonia solani AG-3PT infecting potato.

    PubMed

    Das, Subha; Falloon, Richard E; Stewart, Alison; Pitman, Andrew R

    2014-11-01

    Rhizoctonia solani (teleomorph: Thanatephorus cucumeris) is a soil-borne plant pathogenic fungus that has a broad host range, including potato. In this study, the double-stranded RNA (dsRNA) profiles were defined for 39 Rhizoctonia solani isolates representative of two different anastomosis groups (AGs) associated with black scurf of potato in New Zealand. A large dsRNA of c. 12 kb-18 kb was detected in each of the isolates, regardless of AG or virulence on potato. Characterisation of the large dsRNA from R. solani AG-3PT isolate RS002, using random amplification of total dsRNA and analyses of overlapping cDNA sequences, resulted in the assembly of a consensus sequence of 14 694 nt. A single, large open reading frame was identified on the positive strand of the assembled sequence encoding a putative polypeptide of at least 4893 amino acids, with a predicted molecular mass of 555.6 kDa. Conserved domains within this polypeptide included those for a viral methyltransferase, a viral RNA helicase 1 and an RNA-dependent RNA polymerase. The domains and their sequential organisation revealed the polyprotein was very similar to those encoded by dsRNA viruses of the genus Endornavirus, in the family Endornaviridae. This is the first report of an endornavirus in R. solani, and thus the putative virus is herein named Rhizoctonia solani endornavirus - RS002 (RsEV-RS002). Partial characterisation of the large dsRNAs in five additional AG-3PT isolates of R. solani also identified them as probable endornaviruses, suggesting this family of viruses is widespread in R. solani infecting potato. The ubiquitous nature of endornaviruses in this plant pathogen implies they may have an important, but yet uncharacterised, role in R. solani.

  7. Highly sensitive immunoassay based on SERS using nano-Au immune probes and a nano-Ag immune substrate.

    PubMed

    Shu, Lei; Zhou, Jun; Yuan, Xiaocong; Petti, Lucia; Chen, Jinping; Jia, Zhenhong; Mormile, Pasquale

    2014-06-01

    A super-high-sensitivity immunoassay based on surface-enhanced Raman scattering (SERS) was implemented using the nano-Au immune probes and nano-Ag immune substrate. Ultraviolet-visible extinction spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images, and SERS spectra were used to characterise the nano-Au immune probes and the nano-Ag immune substrate. The nano-Ag immune substrate was prepared by the in situ growth of Ag nanoparticles and the subsequent linkage of these nanoparticles with anti-apolipoprotein B on a silicon wafer. The nano-Ag immune substrate exhibited strong SERS activity, excellent reproducibility, and high biospecificity. The nano-Au immune probes were prepared by immobilising 4-mercaptobenzoic acid (4MBA) molecules as a Raman reporter and anti-apolipoprotein B onto the surfaces of Au nanoparticles. It was found that 4MBA induced the aggregation of Au nanoparticles, resulting in the generation of vast hot spots. Moreover, the nano-Au immune probes exhibited strong SERS activity and high biospecificity. A sandwich-type immunoassay structure consisting of the nano-Au immune probes and nano-Ag immune substrate was used to detect the concentration of apolipoprotein B, where the detection limit was as low as 2 fg/mL (3.878×10(-18) mol/L). Taken together, the experimental results indicate that the proposed immunoassay protocol has a great potential application in biological sensing and clinical diagnostics.

  8. Tuning the Luminescent Properties of a Ag/Au Tetranuclear Complex Featuring Metallophilic Interactions via Solvent-Dependent Structural Isomerization.

    PubMed

    Donamaría, Rocío; Gimeno, M Concepción; Lippolis, Vito; López-de-Luzuriaga, José M; Monge, Miguel; Olmos, M Elena

    2016-11-07

    In this paper the reaction products of the basic gold(I) species [Au(C6Cl5)2](-) against the acid salt Ag(OClO3) in the presence of the S-donor macrocyclic ligand 1,4,7-trithiacyclononane ([9]aneS3) are studied in different solvents. Two different isomers of stoichiometry [{Au(C6Cl5)2}Ag([9]aneS3)]2 were isolated depending on the solvent used, dichloromethane or tetrahydrofuran, which show different luminescence in the solid state. X-ray diffraction studies of these compounds reveals that both show the same heteropolynuclear Ag···Au···Au···Ag system but with different Au···Au interaction distances and different relative positions of the cationic fragment [Ag([9]aneS3)](+) in the structure with respect the bimetallic Au···Au core. This work includes a study of the optical properties of both isomers, as well as time-dependent density functional theory calculations that were performed to determine the origin of their different luminescence.

  9. Au@Ag core-shell nanocubes for efficient plasmonic light scattering effect in low bandgap organic solar cells.

    PubMed

    Baek, Se-Woong; Park, Garam; Noh, Jonghyeon; Cho, Changsoon; Lee, Chun-Ho; Seo, Min-Kyo; Song, Hyunjoon; Lee, Jung-Yong

    2014-04-22

    In this report, we propose a metal-metal core-shell nanocube (NC) as an advanced plasmonic material for highly efficient organic solar cells (OSCs). We covered an Au core with a thin Ag shell as a scattering enhancer to build Au@Ag NCs, which showed stronger scattering efficiency than Au nanoparticles (AuNPs) throughout the visible range. Highly efficient plasmonic organic solar cells were fabricated by embedding Au@Ag NCs into an anodic buffer layer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), and the power conversion efficiency was enhanced to 6.3% from 5.3% in poly[N-9-hepta-decanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)] (PCDTBT):[6,6]-phenyl C71-butyric acid methyl ester (PC70BM) based OSCs and 9.2% from 7.9% in polythieno[3,4-b]thiophene/benzodithiophene (PTB7):PC70BM based OSCs. The Au@Ag NC plasmonic PCDTBT:PC70BM-based organic solar cells showed 2.2-fold higher external quantum efficiency enhancement compared to AuNPs devices at a wavelength of 450-700 nm due to the amplified plasmonic scattering effect. Finally, we proved the strongly enhanced plasmonic scattering efficiency of Au@Ag NCs embedded in organic solar cells via theoretical calculations and detailed optical measurements.

  10. Ag2S/g-C3N4 composite photocatalysts for efficient Pt-free hydrogen production. The co-catalyst function of Ag/Ag2S formed by simultaneous photodeposition.

    PubMed

    Jiang, Deli; Chen, Linlin; Xie, Jimin; Chen, Min

    2014-03-28

    Without Pt as cocatalyst, the photocatalytic hydrogen evolution activity of graphitic carbon nitride (g-C3N4) or even its composite is normally rather low (<1 μmol h(-1)). Exploring Pt-free cocatalysts to substitute precious Pt is of great importance in the photocatalytic field. In the present work, Ag2S-modified g-C3N4 (Ag2S/g-C3N4) composite photocatalysts were prepared via a simple precipitation method. The results demonstrated that the photocatalytic H2-production activity of g-C3N4 can be remarkably increased by the combination of Ag2S. The optimal Ag2S loading was found to be 5 wt%, giving a H2 production of 10 μmol h(-1), around 100 times that of pure g-C3N4. The enhanced photocatalytic activity can be mainly attributed to the effective charge transfer between g-C3N4 and Ag/Ag2S, of which the latter is formed by simultaneous photodeposition in the photocatalytic H2 evolution reaction and acts as an efficient co-catalyst for the g-C3N4. This work showed the possibility for utilization of Ag2S or Ag/Ag2S as a substitute for Pt in the photocatalytic production of H2 using g-C3N4.

  11. A facile fabrication of Ag-Au-Ag nanostructures with nanogaps for intensified surface-enhanced Raman scattering

    NASA Astrophysics Data System (ADS)

    Jin, Liangliang; She, Guangwei; Li, Jing; Xia, Jing; Wang, Xiaotian; Mu, Lixuan; Shi, Wensheng

    2016-12-01

    Nanogap between two metallic nanostructures has been demonstrated to be able to efficiently concentrate an incident electromagnetic field into a small space. As a result, the formed strong field localization could extraordinarily enhance the surface-enhanced Raman scattering (SERS). In this study, controllable plasmonic nanogaps are formed by separating two layers of plasmonic Ag nanoparticles (50-100 nm) with small Au nanoparticles (2.5-6 nm). The size of the nanogaps can be readily tuned by altering the size of the Au nanoparticles. Utilizing an SERS substrate with such nanogaps, the SERS performance can be significantly improved. Such improvement could be attributed to the strongly enhanced electric field within the nanogaps, which is demonstrated by the Finite-difference time-domain simulations. The present work provides a facile strategy to rationally fabricate SERS substrates with controllable nanogaps and intensified SERS signals.

  12. Diffusion of gold from the inner core to the surface of Ag(2)S nanocrystals.

    PubMed

    Yang, Jun; Ying, Jackie Y

    2010-02-24

    The diffusion of Au in Ag(2)S from the inner core to the surface of Ag(2)S was reported, and a new nanocomposite of core-shell Pt@Ag(2)S and Au nanoparticles has been derived through this diffusion phenomenon. Ostwald ripening was observed by transmission electron microscopy during the characterization of the nanocomposite. This elucidated the mechanism of formation of semiconductor-metal heterostructures as a consequence of Au diffusion in Ag(2)S nanocrystals.

  13. Focused-ion-beam-fabricated Au nanorods coupled with Ag nanoparticles used as surface-enhanced Raman scattering-active substrate for analyzing trace melamine constituents in solution.

    PubMed

    Sivashanmugan, Kundan; Liao, Jiunn-Der; Liu, Bernard Haochih; Yao, Chih-Kai

    2013-10-24

    A well-ordered Au-nanorod array with a controlled tip ring diameter (Au_NRsd) was fabricated using the focused ion beam method. Au_NRsd was then coupled with Ag nanoparticles (Ag NPs) to bridge the gaps among Au nanorods. The effect of surface-enhanced Raman scattering (SERS) on Au_NRsd and Ag NPs/Au_NRsd was particularly verified using crystal violet (CV) as the molecular probe. Raman intensity obtained from a characteristic peak of CV on Au_NRsd was estimated by an enhancement factor of ≈10(7) in magnitude, which increased ≈10(12) in magnitude for that on Ag NPs/Au_NRsd. A highly SERS-active Ag NPs/Au_NRsd was furthermore applied for the detection of melamine (MEL) at very low concentrations. Raman-active peaks of MEL (10(-3) to 10(-12)M) in water or milk solution upon Au_NRsd or Ag NPs/Au_NRsd were well distinguished. The peaks at 680 and 702 cm(-1) for MEL molecules were found suitable to be used as the index for sensing low-concentration MEL in a varied solution, while that at 1051 cm(-1) was practical to interpret MEL molecules in water or milk solution bonded with Au (i.e., Au_NRsd) or Ag (i.e., Ag NPs/Au_NRsd) surface. At the interface of Ag NPs/Au_NRsd and MEL molecules in milk solution, a laser-induced electromagnetic field or hotspot effect was produced and competent to sense low-concentration MEL molecules interacting with Ag and Au surfaces. Accordingly, Ag NPs/Au_NRsd is very promising to be used as a fast and sensitive tool for screening MEL in complex matrices such as adulteration in e.g., food and pharmaceutical products.

  14. Polynuclear Gold [AuI]4, [AuI]8, and Bimetallic [AuI 4AgI] Complexes: C−H Functionalization of Carbonyl Compounds and Homogeneous Carbonylation of Amines

    PubMed Central

    Smirnova, Ekaterina S.; Muñoz Molina, José M.; Johnson, Alice; Bandeira, Nuno A. G.; Bo, Carles

    2016-01-01

    Abstract The synthesis of tetranuclear gold complexes, a structurally unprecedented octanuclear complex with a planar [AuI 8] core, and pentanuclear [AuI 4MI] (M=Cu, Ag) complexes is presented. The linear [AuI 4] complex undergoes C−H functionalization of carbonyl compounds under mild reaction conditions. In addition, [AuI 4AgI] catalyzes the carbonylation of primary amines to form ureas under homogeneous conditions with efficiencies higher than those achieved by gold nanoparticles. PMID:27167611

  15. Energy loss of 107Ag, 109Ag, and 150Sm in Ni and Au

    NASA Astrophysics Data System (ADS)

    Ribas, R. V.; Seale, W. A.; Roney, W. A.; Szanto, E. M.

    1980-04-01

    The stopping pow´er of 107Ag, 109Ag, and 150Sm in nickel and gold was measured as a preliminary test of a new technique for measuring energy loss based on the γ-ray Doppler shift. The analysis of the data was based on the theories of Lindhard, Scharff, and Schiott for nuclear and electronic stopping. The results are compared with the semiempirical predictions of Northcliffe and Schilling and the Lindhard-Scharff-Schiott theory.

  16. AuAg bimetallic nonalloyed nanoparticles on a periodically nanostructured GaAs substrate for enhancing light trapping.

    PubMed

    Lee, Soo Kyung; Tan, Chee Leong; Ju, Gun Wu; Song, Jae Hong; Yeo, Chan Il; Lee, Yong Tak

    2015-12-15

    We present a light trapping structure consisting of AuAg bimetallic nonalloyed nanoparticles (BNNPs) on cone-shaped GaAs subwavelength structures (SWSs), combining the advantages of plasmonic structures and SWSs for GaAs-based solar cell applications. To obtain efficient light trapping in solar cells, the optical properties' dependence on the size and composition of the Ag and Au metal nanoparticles was systematically investigated. Cone-shaped GaAs SWSs with AuAg BNNPs formed from an Au film of 12 nm and an Ag film of 10 nm exhibited the extremely low average reflectance (R(avg)) of 2.43% and the solar-weighted reflectance (SWR) of 2.38%, compared to that of a bare GaAs substrate (R(avg), 37.50%; SWR, 36.72%) in the wavelength range of 300 to 870 nm.

  17. Anchoring of Ag-Au alloy nanoparticles on reduced graphene oxide sheets for the reduction of 4-nitrophenol

    NASA Astrophysics Data System (ADS)

    Hareesh, K.; Joshi, R. P.; D. V., Sunitha; Bhoraskar, V. N.; Dhole, S. D.

    2016-12-01

    One-step gamma radiation assisted method has been used for the synthesis of Silver-Gold (Ag-Au) alloy nanoparticles with simultaneous reduction of graphene oxide (GO). UV-vis spectroscopic results along with X-ray diffraction analysis, X-ray Photoelectron spectroscopy and Transmission electron microscopy confirmed the decoration face centered cubic structured Ag-Au nanoparticles of size (5-19) nm on reduced graphene oxide (rGO) sheets. The increase in disorder parameter in Raman spectroscopy indicates the formation of more number of small sp2 domains. The synthesized Ag-Au-rGO nanocomposite showed enhanced catalytic activity towards the reduction of 4-Nitrophenol compared to individual Ag-Au and rGO components.

  18. Plasmonic effects of au/ag bimetallic multispiked nanoparticles for photovoltaic applications.

    PubMed

    Sharma, Manisha; Pudasaini, Pushpa Raj; Ruiz-Zepeda, Francisco; Vinogradova, Ekaterina; Ayon, Arturo A

    2014-09-10

    In recent years, there has been considerable interest in the use of plasmons, that is, free electron oscillations in conductors, to boost the performance of both organic and inorganic thin film solar cells. This has been driven by the possibility of employing thin active layers in solar cells in order to reduce materials costs, and is enabled by significant advances in fabrication technology. The ability of surface plasmons in metallic nanostructures to guide and confine light in the nanometer scale has opened up new design possibilities for solar cell devices. Here, we report the synthesis and characterization of highly monodisperse, reasonably stable, multipode Au/Ag bimetallic nanostructures using an inorganic additive as a ligand for photovoltaic applications. A promising surface enhanced Raman scattering (SERS) effect has been observed for the synthesized bimetallic Au/Ag multispiked nanoparticles, which compare favorably well with their Au and Ag spherical nanoparticle counterparts. The synthesized plasmonic nanostructures were incorporated on the rear surface of an ultrathin planar c-silicon/organic polymer hybrid solar cell, and the overall effect on photovoltaic performance was investigated. A promising enhancement in solar cell performance parameters, including both the open circuit voltage (VOC) and short circuit current density (JSC), has been observed by employing the aforementioned bimetallic multispiked nanoparticles on the rear surface of solar cell devices. A power conversion efficiency (PCE) value as high as 7.70% has been measured in a hybrid device with Au/Ag multispiked nanoparticles on the rear surface of an ultrathin, crystalline silicon (c-Si) membrane (∼ 12 μm). This value compares well to the measured PCE value of 6.72% for a similar device without nanoparticles. The experimental observations support the hope for a sizable PCE increase, due to plasmon effects, in thin-film, c-Si solar cells in the near future.

  19. Collective global dynamics in Au+Au collisions at the BNL AGS

    NASA Astrophysics Data System (ADS)

    Bravina, L.; Csernai, L. P.; Lévai, P.; Strottman, D.

    1994-10-01

    Signatures of collective effects are studied in the quark gluon string model and in the fluid dynamical model for Au+Au collisions at 11.6A GeV/c. In the fluid dynamical model the dependence of observables on the quark-gluon plasma (QGP) formation in the equation of state is pointed out although the maximal total amount of pure QGP formed is only about 8 fm3 in these reactions. In contrast to the baryon rapidity distribution, the in-plane transverse flow and especially the squeeze-out effect are particularly sensitive to the EOS. In the QGSM the lifetime and extent of baryon density in strings are studied. The QGSM picture is very similar to the one obtained in the fluid dynamical model with a pure hadronic EOS.

  20. Determining the Concentration Dependent Transformations of Ag Nanoparticles in Complex Media: Using SP-ICP-MS and Au@Ag Core-Shell Nanoparticles as Tracers.

    PubMed

    Merrifield, Ruth C; Stephan, Chady; Lead, Jamie

    2017-03-01

    The fate, behavior, and impact of engineered nanoparticles (NPs) in toxicological and environmental media are driven by complex processes which are difficult to quantify. A key limitation is the ability to perform measurements at low and environmentally relevant concentrations, since concentration may be a key factor determining fate and effects. Here, we use single particle inductively coupled mass spectroscopy (SP-ICP-MS) to measure directly NP diameter and particle number concentration of suspensions containing gold-silver core-shell (Au@Ag) NPs in EPA moderately hard water (MHW) and MHW containing 2.5 mg L(-1) Suwannee River fulvic acid. The Au core of the Au@Ag NPs acts as an internal standard, and aids in the analysis of the complex Ag transformations. The high sensitivity of SP-ICP-MS, along with the Au@Ag NPs, enabled us to track the NP transformations in the range 0.01 and 50 μg L(-1), without further sample preparation. On the basis of the analysis of both Au and Ag parameters (size, size distribution, and particle number), concentration was shown to be a key factor in NP behavior. At higher concentration, NPs were in an aggregation-dominated regime, while at the lower and environmentally representative concentrations, dissolution of Ag was dominant and aggregation was negligible. In addition, further formation of ionic silver as Ag NPs in the form of AgS or AgCl was shown to occur. Between 1 and 10 μg L(-1), both aggregation and dissolution were important. The results suggest that, under realistic conditions, the role of NP homoaggregation may be minimal. In addition, the complexity of exposure and dose in dose-response relationships is highlighted.

  1. Joint contributions of Ag ions and oxygen vacancies to conducting filament evolution of Ag/TaO{sub x}/Pt memory device

    SciTech Connect

    Chung, Yu-Lung; Cheng, Wen-Hui; Chen, Wei-Chih; Jhan, Sheng-An; Chen, Jen-Sue; Jeng, Jiann-Shing

    2014-10-28

    The electroforming and resistive switching behaviors in the Ag/TaO{sub x}/Pt trilayer structure are investigated under a continual change of temperatures between 300 K and 100 K to distinguish the contributions of Ag ions and oxygen vacancies in developing of conducting filaments. For either electroforming or resistive switching, a significantly higher forming/set voltages is needed as the device is operated at 100 K, as compared to that observed when operating at 300 K. The disparity in forming/set voltages of Ag/TaO{sub x}/Pt operating at 300 K and 100 K is attributed to the contribution of oxygen vacancies, in addition to Ag atoms, in formation of conducting filament at 100 K since the mobilities of oxygen vacancies and Ag ions become comparable at low temperature. The presence of oxygen vacancy segment in the conducting filament also modifies the reset current from a gradually descending behavior (at 300 K) to a sharp drop (at 100 K). Furthermore, the characteristic set voltage and reset current are irreversible as the operation temperature is brought from 100 K back to 300 K, indicating the critical role of filament constituents on the switching behaviors of Ag/oxide/Pt system.

  2. Highly Stretchable and Transparent Supercapacitor by Ag-Au Core-Shell Nanowire Network with High Electrochemical Stability.

    PubMed

    Lee, Habeom; Hong, Sukjoon; Lee, Jinhwan; Suh, Young Duk; Kwon, Jinhyeong; Moon, Hyunjin; Kim, Hyeonseok; Yeo, Junyeob; Ko, Seung Hwan

    2016-06-22

    Stretchable and transparent electronics have steadily attracted huge attention in wearable devices. Although Ag nanowire is the one of the most promising candidates for transparent and stretchable electronics, its electrochemical instability has forbidden its application to the development of electrochemical energy devices such as supercapacitors. Here, we introduce a highly stretchable and transparent supercapacitor based on electrochemically stable Ag-Au core-shell nanowire percolation network electrode. We developed a simple solution process to synthesize the Ag-Au core-shell nanowire with excellent electrical conductivity as well as greatly enhanced chemical and electrochemical stabilities compared to pristine Ag nanowire. The proposed core-shell nanowire-based supercapacitor still possesses fine optical transmittance and outstanding mechanical stability up to 60% strain. The Ag-Au core-shell nanowire can be a strong candidate for future wearable electrochemical energy devices.

  3. New isotopic evidence bearing on bonanza (Au-Ag) epithermal ore-forming processes

    NASA Astrophysics Data System (ADS)

    Saunders, James A.; Mathur, Ryan; Kamenov, George D.; Shimizu, Toru; Brueseke, Matthew E.

    2016-01-01

    New Cu, S, and Pb isotope data provide evidence for a magmatic source of metal(loid)s and sulfur in epithermal Au-Ag deposits even though their ore-forming solutions are composed primarily of heated meteoric (ground) waters. The apparent isotopic discrepancy between ore metals and ore-forming solutions, and even between the ore and associated gangue minerals, indicates two different sources of epithermal ore-forming constituents: (1) a shallow geothermal system that not only provides the bulk of water for the ore-forming solutions but also major chemical constituents leached from host rocks (silica, aluminum, potassium, sodium, calcium) to make gangue minerals and (2) metals and metalloids (As, Te, Sb, etc.) and sulfur (±Se) derived from deeper magma bodies. Isotopic data are consistent with either vapor-phase transport of metal(loids) and sulfur and their subsequent absorption by shallow geothermal waters or formation of metallic (Au, Ag, Cu phases) nanoparticles at depth from magmatic fluids prior to encountering the geothermal system. The latter is most consistent with ore textures that indicate physical transport and aggregation of nanoparticles were significant ore-forming processes. The recognition that epithermal Au-Ag ores form in tectonic settings that produce magmas capable of releasing metal-rich fluids necessary to form these deposits can refine exploration strategies that previously often have focused on locating fossil geothermal systems.

  4. First principles investigation of the diffusion of interstitial Cu, Ag and Au in ZnTe

    NASA Astrophysics Data System (ADS)

    Chen, Li An; Zhu, Xing Feng; Chen, Ling Fu

    2015-07-01

    The diffusion is of great significance in many applications when the impurities are employed to tune the semiconductor's electrical or optical properties. It is necessary to understand how dopant defects diffuse in semiconductors. Using first-principles calculations, we consider interstitial diffusion mechanisms and calculate the migration barrier energies of interstitial Cu, Ag and Au atoms in II-VI compounds ZnTe. We find that the relative size of dopant and bulk atoms is an important factor which affects the diffusion behavior. The high symmetry Tc site, which is tetrahedrally coordinated by four cation atoms, is the global minimum energy location for Ag and Au interstitials. The size of Cu adatom is small, so Cu is more stable when it locates at the Ta site which is tetrahedrally coordinated by four anion atoms. But the global minimum energy location for Cu interstitials is M site which is of smaller space than Ta. Cu adatoms show an asymmetric curve of energy diffusion barrier with two energetically distinct extremum in the pathway. Ag diffuses along nearly straight line paths along [111] or equivalent directions. Diffusion for Cu or Au deviates from the straight line paths along <111> avoiding high symmetric sites.

  5. Structural and electronic properties of graphene nanoflakes on Au(111) and Ag(111)

    NASA Astrophysics Data System (ADS)

    Tesch, Julia; Leicht, Philipp; Blumenschein, Felix; Gragnaniello, Luca; Fonin, Mikhail; Marsoner Steinkasserer, Lukas Eugen; Paulus, Beate; Voloshina, Elena; Dedkov, Yuriy

    2016-03-01

    We investigate the electronic properties of graphene nanoflakes on Ag(111) and Au(111) surfaces by means of scanning tunneling microscopy and spectroscopy as well as density functional theory calculations. Quasiparticle interference mapping allows for the clear distinction of substrate-derived contributions in scattering and those originating from graphene nanoflakes. Our analysis shows that the parabolic dispersion of Au(111) and Ag(111) surface states remains unchanged with the band minimum shifted to higher energies for the regions of the metal surface covered by graphene, reflecting a rather weak interaction between graphene and the metal surface. The analysis of graphene-related scattering on single nanoflakes yields a linear dispersion relation E(k), with a slight p-doping for graphene/Au(111) and a larger n-doping for graphene/Ag(111). The obtained experimental data (doping level, band dispersions around EF, and Fermi velocity) are very well reproduced within DFT-D2/D3 approaches, which provide a detailed insight into the site-specific interaction between graphene and the underlying substrate.

  6. Magnetic and electronic structure of Mn nanostructures on Ag(111) and Au(111)

    NASA Astrophysics Data System (ADS)

    Cardias, R.; Bezerra-Neto, M. M.; Ribeiro, M. S.; Bergman, A.; Szilva, A.; Eriksson, O.; Klautau, A. B.

    2016-01-01

    We present results of the electronic and magnetic structure of Mn nanowires adsorbed on Ag(111) and Au(111) surfaces. For finite Mn nanowires on Ag(111) and Au(111) surfaces, our ab initio results show that the large difference between the spin-orbit splitting of these two surfaces leads to completely different magnetic configurations. The magnetic ordering for Mn nanowires adsorbed on Ag(111) is governed by the strong exchange interaction between Mn adatoms. For Mn nano-chains on Au(111), the competition between Heisenberg and Dzyaloshinskii-Moriya interactions leads to a complex magnetic structure of the clusters considered here. Among the more conspicuous results we note a spin-spiral helical type for the nanowire with seven atoms, and a complex magnetic configuration incommensurate with the substrate lattice for a double-sized Mn wire. The effect of the structural relaxation is also investigated, showing sensitivity of the exchange interactions to the bond distance to the substrate. We also demonstrate that small changes in the band filling of these Mn chains results in drastically different changes of the interatomic exchange. Finally, we show that dispersion of the electronic energy spectrum is possible even in nanostructures with bounded spatial extension.

  7. Cooperative plasmonic effect of Ag and Au nanoparticles on enhancing performance of polymer solar cells.

    PubMed

    Lu, Luyao; Luo, Zhiqiang; Xu, Tao; Yu, Luping

    2013-01-09

    This article describes a cooperative plasmonic effect on improving the performance of polymer bulk heterojunction solar cells. When mixed Ag and Au nanoparticles are incorporated into the anode buffer layer, dual nanoparticles show superior behavior on enhancing light absorption in comparison with single nanoparticles, which led to the realization of a polymer solar cell with a power conversion efficiency of 8.67%, accounting for a 20% enhancement. The cooperative plasmonic effect aroused from dual resonance enhancement of two different nanoparticles. The idea was further unraveled by comparing Au nanorods with Au nanoparticles for solar cell application. Detailed studies shed light into the influence of plasmonic nanostructures on exciton generation, dissociation, and charge recombination and transport inside thin film devices.

  8. Electronic influences on metallophilic interactions in [Pt(tpy)X][Au(C6F5)2] double salts.

    PubMed

    Phillips, Val; Willard, Kathryn J; Golen, James A; Moore, Curtis J; Rheingold, Arnold L; Doerrer, Linda H

    2010-10-18

    Four double salt compounds of the type [Pt(tpy)X][Au(C(6)F(5))(2)], where tpy =2,2':6',2''-terpyridine and X = Cl, 3, Br, 4, I, 5, and CCPh, 6, and their platinum starting materials, [Pt(tpy)Br]Br·2H(2)O, 1, and [Pt(tpy)(CCPh)]PF(6)·DMF·H(2)O, 2, have been synthesized and characterized. Complex 2 is a solvated form of the known and structurally characterized [Pt(tpy)(CCPh)]PF(6) species. All compounds were characterized by single-crystal X-ray diffraction, elemental analyses, and solution electronic spectra. Structural characterization shows that compounds 3 and 4 are similar in the solid state and form cation-anion stacking patterns while compounds 5 and 6 form chains of cations supported by metallophilic interactions with anion partners on either side of the chains. Solution studies (UV-vis and fluorescence) strongly suggest that there are no Pt···Au interactions in solution state. Electronic structure calculations with density functional theory (DFT) elucidate the subtle changes in the electronic scaffolding of the ions in these compounds and show that predictions of metallophilic interactions are not straightforward but can be understood in terms of orbital symmetry and the relative energies of the frontier orbitals.

  9. Electronic properties and topological phases of ThXY (X = Pb, Au, Pt and Y = Sb, Bi, Sn) compounds

    NASA Astrophysics Data System (ADS)

    Zahra, Nourbakhsh; Aminollah, Vaez

    2016-03-01

    The electronic properties and topological phases of ThXY (X = Pb, Au, Pt, Pd and Y = Sb, Bi, Sn) compounds in the presence of spin-orbit coupling, using density functional theory are investigated. The ThPtSn compound is stable in the ferromagnetic phase and the other ThXY compounds are stable in nonmagnetic phases. Band structures of these compounds in topological phases (insulator or metal) and normal phases within generalized gradient approximation (GGA) and Engel-Vosko generalized gradient approximation (GGA_EV) are compared. The ThPtSn, ThPtBi, ThPtSb, ThPdBi, and ThAuBi compounds have topological phases and the other ThXY compounds have normal phases. Band inversion strengths and topological phases of these compounds at different pressure are studied. It is seen that the band inversion strengths of these compounds are sensitive to pressure and for each compound a second-order polynomial fitted on the band inversion strengths-pressure curves.

  10. Highly porous ZnS microspheres for superior photoactivity after Au and Pt deposition and thermal treatment

    SciTech Connect

    Singla, Shilpa; Pal, Bonamali

    2013-11-15

    Graphical abstract: Highly porous ZnS microsphere of size 2–5 μm having large surface area ca. 173.14 m{sup 2} g{sup −1} exhibits superior photocatalytic activity for the oxidation of 4-nitrophenol under UV light irradiation. The rate of photooxidation has been significantly improved by Au and Pt deposition and after sintering, respectively, due to rapid electron acceptance by metal from photoexcited ZnS and growth of crystalline ZnS phase. - Highlights: • Photoactive ZnS microsphere of size 2–5 μm was prepared by hydrothermal route. • Highly porous cubic spherical ZnS crystals possess a large surface area, 173 m{sup 2} g{sup −1}. • 1 wt% Au and Pt photodeposition highly quenched the photoluminescence at 437 nm. • Sintering and metal loading notably improve the photooxidation rate of 4-nitrophenol. • Pt co-catalyst always exhibits superior photoactivity of ZnS microsphere than Au. - Abstract: This work highlights the enhanced photocatalytic activity of porous ZnS microspheres after Au and Pt deposition and heat treatment at 500 °C for 2 h. Microporous ZnS particles of size 2–5 μm with large surface area 173.14 m{sup 2} g{sup −1} and pore volume 0.0212 cm{sup 3} g{sup −1} were prepared by refluxing under an alkaline medium. Photoluminescence of ZnS at 437 nm attributed to sulfur or zinc vacancies were quenched to 30% and 49%, respectively, after 1 wt% Au and Pt loading. SEM images revealed that each ZnS microparticle consist of several smaller ZnS spheres of size 2.13 nm as calculated by Scherrer's equation. The rate of photooxidation of 4-nitrophenol (10 μM) under UV (125 W Hg arc–10.4 mW/cm{sup 2}) irradiation has been significantly improved by Au and Pt deposition followed by sintering due to better electron capturing capacity of deposited metals and growth of crystalline ZnS phase with less surface defects.

  11. Synthesis of multifunctional Ag@Au@phenol formaldehyde resin particles loaded with folic acids for photothermal therapy.

    PubMed

    Yang, Ping; Xu, Qi-Zhi; Jin, Sheng-Yu; Lu, Yang; Zhao, Yang; Yu, Shu-Hong

    2012-07-23

    Multifunctional Ag@Au@ phenol formaldehyde resin (PFR) particles loaded with folic acids (FA) have been designed for killing tumor cells through photothermy conversion under the irradiation of near-infrared (NIR) light. Possessing the virtue of good fluorescence, low toxicity, and good targeting, the nanocomposite consists of an Ag core, an Au layer, a PFR shell, and folic acids on the PFR shell. The Ag@PFR core-shell structure can be prepared with a simple hydrothermal method after preheating. We then filled the PFR shell with a layer of Au by heating and modified the shell with polyelectrolyte to change its surface charge state. To capture tumor cells actively, FA molecules were attached onto the surface of the Ag@Au@PFR particles in the presence of 1-ethyl-3-(3-dimethly aminopropyl) carbodiimide (EDAC) and N-hydroxysuccinimide (NHS). Owing to the excellent property of Au NPs and Ag NPs as photothermal conversion agents, the Ag@Au@ PFR@FA particles can be utilized to kill tumor cells when exposed to NIR light.

  12. Redox-Robust Pentamethylferrocene Polymers and Supramolecular Polymers, and Controlled Self-Assembly of Pentamethylferricenium Polymer-Embedded Ag, AgI, and Au Nanoparticles.

    PubMed

    Gu, Haibin; Ciganda, Roberto; Castel, Patricia; Vax, Amélie; Gregurec, Danijela; Irigoyen, Joseba; Moya, Sergio; Salmon, Lionel; Zhao, Pengxiang; Ruiz, Jaime; Hernández, Ricardo; Astruc, Didier

    2015-12-07

    We report the first pentamethylferrocene (PMF) polymers and the redox chemistry of their robust polycationic pentamethylferricenium (PMFium) analogues. The PMF polymers were synthesized by ring-opening metathesis polymerization (ROMP) of a PMF-containing norbornene derivative by using the third-generation Grubbs ruthenium metathesis catalyst. Cyclic voltammetry studies allowed us to determine confidently the number of monomer units in the polymers through the Bard-Anson method. Stoichiometric oxidation by using ferricenium hexafluorophosphate quantitatively and instantaneously provided fully stable (even in aerobic solutions) blue d(5) Fe(III) metallopolymers. Alternatively, oxidation of the PMF-containing polymers was conducted by reactions with Ag(I) or Au(III) , to give PMFium polymer-embedded Ag and Au nanoparticles (NPs). In the presence of I2 , oxidation by using Ag(I) gave polymer-embedded Ag/AgI NPs and AgNPs at the surface of AgI NPs. Oxidation by using Au(III) also produced an Au(I) intermediate that was trapped and characterized. Engineered single-electron transfer reactions of these redox-robust nanomaterial precursors appear to be a new way to control their formation, size, and environment in a supramolecular way.

  13. Raman scattering of 4-aminobenzenethiol sandwiched between Ag nanoparticle and macroscopically smooth Au substrate: effects of size of Ag nanoparticles and the excitation wavelength.

    PubMed

    Kim, Kwan; Choi, Jeong-Yong; Lee, Hyang Bong; Shin, Kuan Soo

    2011-09-28

    A nanogap formed by a metal nanoparticle and a flat metal substrate is one kind of "hot site" for surface-enhanced Raman scattering (SERS). Accordingly, although no Raman signal is observable when 4-aminobenzenethiol (4-ABT), for instance, is self-assembled on a flat Au substrate, a distinct spectrum is obtained when Ag or Au nanoparticles are adsorbed on the pendent amine groups of 4-ABT. This is definitely due to the electromagnetic coupling between the localized surface plasmon of Ag or Au nanoparticle with the surface plasmon polariton of the planar Au substrate, allowing an intense electric field to be induced in the gap even by visible light. To appreciate the Raman scattering enhancement and also to seek the optimal condition for SERS at the nanogap, we have thoroughly examined the size effect of Ag nanoparticles, along with the excitation wavelength dependence, by assembling 4-ABT between planar Au and a variable-size Ag nanoparticle (from 20- to 80-nm in diameter). Regarding the size dependence, a higher Raman signal was observed when larger Ag nanoparticles were attached onto 4-ABT, irrespective of the excitation wavelength. Regarding the excitation wavelength, the highest Raman signal was measured at 568 nm excitation, slightly larger than that at 632.8 nm excitation. The Raman signal measured at 514.5 and 488 nm excitation was an order of magnitude weaker than that at 568 nm excitation, in agreement with the finite-difference time domain simulation. It is noteworthy that placing an Au nanoparticle on 4-ABT, instead of an Ag nanoparticle, the enhancement at the 568 nm excitation was several tens of times weaker than that at the 632.8 nm excitation, suggesting the importance of the localized surface plasmon resonance of the Ag nanoparticles for an effective coupling with the surface plasmon polariton of the planar Au substrate to induce a very intense electric field at the nanogap.

  14. Microwave Spectroscopy and Structure Determination of H_2S-MI (M=Cu,Ag,Au)

    NASA Astrophysics Data System (ADS)

    Medcraft, Chris; Legon, Anthony; Walker, Nick

    2016-06-01

    A series of hydrogen sulphide-metal iodide complexes (H_2S-MI, M=Cu, Ag and Au) have been measured via chirped pulse Fourier transform microwave spectroscopy between 7.5-18 GHz. The complexes were generated in a supersonic expansion via laser ablation of the metal and decomposition of CF_3I. Experimental structures were obtained by least squares fitting of structural parameters to the rotational constants of deuterium and metal (63Cu / 65Cu and 107Ag / 109Ag) isotopologues. Interestingly K-1=1 transitions were observed in the spectra containing D_2S, these were not observed in previous studies of similar molecules (H_2S-MCl). This allowed for the determination of an extra rotational constant and, consequently, extra structural information could be obtained. The structures are compared to high level coupled cluster theory calculations.

  15. Unusual attempt to direct the growth of bimetallic Ag@Pt nanorods on electrochemically reduced graphene oxide nanosheets by electroless exchange of Cu by Pt for an efficient alcohol oxidation

    NASA Astrophysics Data System (ADS)

    Jeena, S. E.; Gnanaprakasam, P.; Selvaraju, T.

    2017-01-01

    A simple and an efficient tool for the direct growth of bimetallic Ag@Pt nanorods (NRDs) on electrochemically reduced graphene oxide (ERGO) nanosheets was developed at glassy carbon electrode (GCE). Initially, Cu shell was grown on Ag core as Ag@Cu NRD by the seed-mediated growth method. Accordingly, Cu shell has been successfully replaced by Pt using the electroless galvanic replacement method with ease by effective functionalization of L-tryptophan on ERGO surface (L-ERGO), which eventually plays an important role in the direct growth of one-dimensional bimetallic NRDs. As a result, the synthesized Ag@Pt NRD-supported L-ERGO nanosheets (Ag@Pt NRDs/L-ERGO/GCE) were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDAX) and Raman spectroscopy. Anodic stripping voltammetry was used to explore its electrochemical properties. Finally, the developed bimetallic Ag@Pt NRDs/L-ERGO/GCEs were studied as a better electrocatalyst compared to the commercial catalysts such as Pt40/C or Pt20/C-loaded electrode for the oxidation of ethanol or methanol with a high tolerance level and an enhanced current density. In addition, the long-term stability was studied using chronoamperometry for 1000 s at the bimetallic NRD electrode for alcohol oxidation which impedes the fouling properties. The unfavourable and favourable electrooxidation of ethanol at Ag@Cu NRDs/L-ERGO/GCE (a) and Ag@Pt NRDs/L-ERGO/GCE (b) is discussed. The synergistic effect of Ag core and catalytic properties of Pt shell at Ag@Pt NRDs/L-ERGO/GCE tend to strongly minimize the CO poisoning effect and enhanced ethanol electrooxidation.

  16. Lifting of the Au(100) surface reconstruction by Pt, Cr, Fe, and Cu adsorption

    NASA Astrophysics Data System (ADS)

    Tempas, Christopher D.; Skomski, Daniel; Tait, Steven L.

    2016-12-01

    The adsorption and growth of metals on the surfaces of other metals is an important topic for studies of heterogeneous catalysis and bimetallic nanoparticles. The surface structure of these systems impacts nanoparticle growth, catalytic activity, and reaction selectivity. In these experiments, platinum, chromium, iron, or copper were vapor deposited on the reconstructed Au(100) surface. The initial growth of each metal was studied by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). Each of the four metals forms anisotropic rectangular islands oriented in the direction of the gold reconstruction rows. The gradual lifting of the surface reconstruction by increased metal coverage is observed, and the reconstruction is fully lifted after 0.5 ML of Pt, Cr, or Fe, or by 3.3 ML of Cu. After the reconstruction is lifted, the island shape changes from rectangular to square, illustrating the effect of surface structure on growth. Second layer islands begin to form before the completion of the first full layer.

  17. Determination of anthracene on Ag-Au alloy nanoparticles/overoxidized-polypyrrole composite modified glassy carbon electrodes.

    PubMed

    Mailu, Stephen N; Waryo, Tesfaye T; Ndangili, Peter M; Ngece, Fanelwa R; Baleg, Abd A; Baker, Priscilla G; Iwuoha, Emmanuel I

    2010-01-01

    A novel electrochemical sensor for the detection of anthracene was prepared by modifying a glassy carbon electrode (GCE) with over-oxidized polypyrrole (PPyox) and Ag-Au (1:3) bimetallic nanoparticles (Ag-AuNPs). The composite electrode (PPyox/Ag-AuNPs/GCE) was prepared by potentiodynamic polymerization of pyrrole on GCE followed by its overoxidation in 0.1 M NaOH. Ag-Au bimetallic nanoparticles were chemically prepared by the reduction of AgNO(3) and HAuCl(4) using C(6)H(5)O(7)Na(3) as the reducing agent as well as the capping agent and then immobilized on the surface of the PPyox/GCE. The nanoparticles were characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the bimetallic alloy nanoparticles. Transmission electron microscopy showed that the synthesized bimetallic nanoparticles were in the range of 20-50 nm. The electrochemical behaviour of anthracene at the PPyox/Ag-AuNPs/GCE with Ag: Au atomic ratio 25:75 (1:3) exhibited a higher electrocatalytic effect compared to that observed when GCE was modified with each constituent of the composite (i.e., PPyox, Ag-AuNPs) and bare GCE. A linear relationship between anodic current and anthracene concentration was attained over the range of 3.0 × 10(-6) to 3.56 × 10(-4) M with a detection limit of 1.69 × 10(-7) M. The proposed method was simple, less time consuming and showed a high sensitivity.

  18. Comparative study of electroless copper deposition based on the seed layers of Pd, PtPd and AuPd

    NASA Astrophysics Data System (ADS)

    Ma, Chuanli; Ye, Weichun; Shi, Xuezhao; Chang, Yanlong; Chen, Yang; Wang, Chunming

    2009-01-01

    The article reports on electroless deposition of copper films onto p-silicon (1 0 0) using different seed (co-seed) layers of Pd, PtPd and AuPd. The dependence of the compositions and morphologies of different seed layers on resultant Cu films were comparatively studied in detail by atomic force microscopy (AFM), field emission scanning electron microscope (FE-SEM) and X-ray photoelectron spectroscopy (XPS). The activities of electroless copper deposition on the p-silicon (1 0 0) with different seed (co-seed) layers were evaluated by polarization curve. It is concluded that the bimetallic AuPd seed displayed the highest catalytic activity for electroless copper deposition, and followed by the order of PtPd > Pd.

  19. All-thiol-stabilized Ag44 and Au12Ag32 nanoparticles with single-crystal structures.

    PubMed

    Yang, Huayan; Wang, Yu; Huang, Huaqi; Gell, Lars; Lehtovaara, Lauri; Malola, Sami; Häkkinen, Hannu; Zheng, Nanfeng

    2013-01-01

    Noble metal nanoparticles stabilized by organic ligands are important for applications in assembly, site-specific bioconjugate labelling and sensing, drug delivery and medical therapy, molecular recognition and molecular electronics, and catalysis. Here we report crystal structures and theoretical analysis of three Ag44(SR)30 and three Au12Ag32(SR)30 intermetallic nanoclusters stabilized with fluorinated arylthiols (SR=SPhF, SPhF2 or SPhCF3). The nanocluster forms a Keplerate solid of concentric icosahedral and dodecahedral atom shells, protected by six Ag2(SR)5 units. Positive counterions in the crystal indicate a high negative charge of 4(-) per nanoparticle, and density functional theory calculations explain the stability as an 18-electron superatom shell closure in the metal core. Highly featured optical absorption spectra in the ultraviolet-visible region are analysed using time-dependent density functional perturbation theory. This work forms a basis for further understanding, engineering and controlling of stability as well as electronic and optical properties of these novel nanomaterials.

  20. A general and high-yield galvanic displacement approach to Au-M (M = Au, Pd, and Pt) core-shell nanostructures with porous shells and enhanced electrocatalytic performances.

    PubMed

    Kuai, Long; Geng, Baoyou; Wang, Shaozhen; Sang, Yan

    2012-07-23

    In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au-M (M = Au, Pd, and Pt) core-shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au-Au, Au-Pd, and Au-Pt core-shell nanostructures with typical porous shells. Moreover, the Au-Au isomeric core-shell nanostructure is reported for the first time. The lower oxidation states of Au(I), Pd(II), and Pt(II) are supposed to contribute to the formation of porous core-shell nanostructures instead of yolk-shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au-Pd core-shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core-shell nanostructures. As expected, the Au-Pd core-shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I(f)/I(b) is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au-M (M = Au, Pd, and Pt) core-shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface-enhanced Raman scattering, and so forth.

  1. Effect of impregnation protocol in the metallic sites of Pt-Ag/activated carbon catalysts for water denitration

    NASA Astrophysics Data System (ADS)

    Aristizábal, A.; Contreras, S.; Divins, N. J.; Llorca, J.; Medina, F.

    2014-04-01

    The influence of the Pt precursor and the impregnation protocol in the catalytic behavior of 3%Pt-1.5%Ag supported on activated carbon for water denitration in a continuous reactor was studied. Pt(NH3)4(NO3)2 and H2PtCl6 were selected as Pt precursors. Five protocols were investigated: sequential impregnations (both sequences), co-impregnation, physical mixture of monometallic catalysts, and physical mixture of a bimetallic catalyst with a Pt monometallic catalyst. The samples were characterized by XRD, XPS, TPR, HRTEM and physisorption. It was found that the catalytic activity strongly depends on the synthesis protocol and the Pt precursor, which modify the particle size. Higher nitrate rates are achieved using H2PtCl6 than Pt(NH3)4(NO3)2; this is mainly related to the smaller metal particle size of the former, evidenced by HRTEM. Nitrate consumption rate is directly related with the mean particle size. The physical mixture of monometallic catalysts resulted in the highest nitrogen rate.

  2. Heteroepitaxial growth of Pt and Au thin films on MgO single crystals by bias-assisted sputtering

    SciTech Connect

    Tolstova, Yulia; Omelchenko, Stefan T.; Shing, Amanda M.; Atwater, Harry A.

    2016-03-17

    The crystallographic orientation of a metal affects its surface energy and structure, and has profound implications for surface chemical reactions and interface engineering, which are important in areas ranging from optoelectronic device fabrication to catalysis. However, it can be very difficult and expensive to manufacture, orient, and cut single crystal metals along different crystallographic orientations, especially in the case of precious metals. One approach is to grow thin metal films epitaxially on dielectric substrates. In this work, we report on growth of Pt and Au films on MgO single crystal substrates of (100) and (110) surface orientation for use as epitaxial templates for thin film photovoltaic devices. We develop bias-assisted sputtering for deposition of oriented Pt and Au films with sub-nanometer roughness. We show that biasing the substrate decreases the substrate temperature necessary to achieve epitaxial orientation, with temperature reduction from 600 to 350 °C for Au, and from 750 to 550 °C for Pt, without use of transition metal seed layers. Additionally, this temperature can be further reduced by reducing the growth rate. Biased deposition with varying substrate bias power and working pressure also enables control of the film morphology and surface roughness.

  3. Robust Fe3O4/SiO2-Pt/Au/Pd magnetic nanocatalysts with multifunctional hyperbranched polyglycerol amplifiers.

    PubMed

    Zhou, Li; Gao, Chao; Xu, Weijian

    2010-07-06

    Here we report a facile approach to prepare multicarboxylic hyperbranched polyglycerol (HPG)-grafted SiO(2)-coated iron oxide (Fe(3)O(4)/SiO(2)) magnetic hybrid support. This support combined the both features of Fe(3)O(4) and HPG, facile magnetic separation, and favorable molecular structure with numerous functional groups. With the use of the grafted-HPGs as templates, various noble metal nanocatalysts such as Pt, Au, and Pd were directly grown on the surfaces of magnetic support with ultrasmall and nearly monodisperse sizes (e.g., the average sizes of Pt, Au, and Pd are 4.8 +/- 0.5, 6.0 +/- 0.6, and 4.0 +/- 0.4 nm, respectively) and high coverage densities. Because of the amplification effect of HPG, high loading capacities of the nanocatalysts, around 0.296, 0.243, and 0.268 mmol/g for Pt, Au, and Pd, respectively, were achieved. Representative catalytic reactions including reduction of 4-nitrophenol, alcohol oxidation, and Heck reaction demonstrated the high catalytic activity of the noble metal nanocatalysts. Because of the stabilization of HPG templates, the nanocatalysts can be readily recycled by a magnet and reused for the next reactions with high efficiencies. The robust multifunctional magnetic hybrids will find important applications in catalysis and other fields such as drug delivery and bioseparations.

  4. Electrical parameters and series resistance analysis of Au/Y/p-InP/Pt Schottky barrier diode at room temperature

    NASA Astrophysics Data System (ADS)

    Rao, L. Dasaradha; Reddy, V. Rajagopal

    2016-05-01

    The current-voltage (I-V) characteristics of Au/Y/p-InP/Pt Schottky barrier diode (SBD) are analyzed at room temperature. The Au/Y/p-InP/Pt SBD shows a good rectification behavior. The ideality factor (n), barrier height (Φb), series resistance (Rs) and shunt resistance (Rsh) are determined from the I-V measurements. The n and Φb values of Au/Y/p-InP/Pt SBD are found to be 1.32 and 0.62 eV respectively. The value of barrier height (BH) obtained from Norde function is compared with those calculated from Cheung's functions. The series resistance (Rs) is calculated from Cheung's and modified Norde functions. Additionally, it is found that n, Φb, Rs, and Rsh have strong correlation with the applied bias. Furthermore, at low and high voltage regions, ohmic and space-charge-limited conduction mechanisms are found to govern the current flow in the diode.

  5. Heteroepitaxial growth of Pt and Au thin films on MgO single crystals by bias-assisted sputtering

    DOE PAGES

    Tolstova, Yulia; Omelchenko, Stefan T.; Shing, Amanda M.; ...

    2016-03-17

    The crystallographic orientation of a metal affects its surface energy and structure, and has profound implications for surface chemical reactions and interface engineering, which are important in areas ranging from optoelectronic device fabrication to catalysis. However, it can be very difficult and expensive to manufacture, orient, and cut single crystal metals along different crystallographic orientations, especially in the case of precious metals. One approach is to grow thin metal films epitaxially on dielectric substrates. In this work, we report on growth of Pt and Au films on MgO single crystal substrates of (100) and (110) surface orientation for use asmore » epitaxial templates for thin film photovoltaic devices. We develop bias-assisted sputtering for deposition of oriented Pt and Au films with sub-nanometer roughness. We show that biasing the substrate decreases the substrate temperature necessary to achieve epitaxial orientation, with temperature reduction from 600 to 350 °C for Au, and from 750 to 550 °C for Pt, without use of transition metal seed layers. Additionally, this temperature can be further reduced by reducing the growth rate. Biased deposition with varying substrate bias power and working pressure also enables control of the film morphology and surface roughness.« less

  6. Heteroepitaxial growth of Pt and Au thin films on MgO single crystals by bias-assisted sputtering

    NASA Astrophysics Data System (ADS)

    Tolstova, Yulia; Omelchenko, Stefan T.; Shing, Amanda M.; Atwater, Harry A.

    2016-03-01

    The crystallographic orientation of a metal affects its surface energy and structure, and has profound implications for surface chemical reactions and interface engineering, which are important in areas ranging from optoelectronic device fabrication to catalysis. However, it can be very difficult and expensive to manufacture, orient, and cut single crystal metals along different crystallographic orientations, especially in the case of precious metals. One approach is to grow thin metal films epitaxially on dielectric substrates. In this work, we report on growth of Pt and Au films on MgO single crystal substrates of (100) and (110) surface orientation for use as epitaxial templates for thin film photovoltaic devices. We develop bias-assisted sputtering for deposition of oriented Pt and Au films with sub-nanometer roughness. We show that biasing the substrate decreases the substrate temperature necessary to achieve epitaxial orientation, with temperature reduction from 600 to 350 °C for Au, and from 750 to 550 °C for Pt, without use of transition metal seed layers. In addition, this temperature can be further reduced by reducing the growth rate. Biased deposition with varying substrate bias power and working pressure also enables control of the film morphology and surface roughness.

  7. Molecularly imprinted electrochemical sensor for propyl gallate based on PtAu bimetallic nanoparticles modified graphene-carbon nanotube composites.

    PubMed

    Cui, Min; Huang, Jiadong; Wang, Yu; Wu, Yumin; Luo, Xiliang

    2015-06-15

    A novel molecularly imprinted electrochemical sensor for propyl gallate (PG) determination was developed via electropolymerization of an o-phenylenediamine membrane in the presence of template molecules on glassy carbon electrode surface modified by PtAu bimetallic nanoparticles-capped graphene-carbon nanotubes composites (PtAu-GrCNTs). The modified electrodes were characterized by cyclic voltammetry, scanning electron microscope, x-ray diffraction and chronoamperometry. Moreover, experimental parameters such as scan cycles, incubation time, molar ratios of template molecules to functional monomers and extraction time were optimized. It was found that the PtAu-GrCNTs composite could effectively enhance the electron transfer efficiency and remarkably improve the sensitivity of the sensor. The results revealed the sensor displayed superb resistance to no-specific binding, very attractive detection limit as low as 2.51×10(-8) mol/L, and a wide linear range from 7×10(-8) mol/L to 1×10(-5) mol/L towards PG. Furthermore, the MIPs sensor was also successfully used for the detection of PG in food samples. Therefore, the MIPs-based electrochemical sensing strategy might provide a sensitive, rapid, and cost-effective method for PG determination and related food safety analysis.

  8. Lithogeochemistry and fluid inclusions of an Au-Ag vein deposit in a granodiorite intrusive

    SciTech Connect

    Hahn, R.; Ikramuddin, M.

    1985-01-01

    Forty-eight samples of altered and unaltered rocks and quartz veins from the Acme mine in northeast Washington, an Au-Ag vein deposit in a granodiorite intrusive, have been analyzed for SiO/sub 2/, Al/sub 2/O/sub 3/, Fe/sub 2/O/sub 3/, Feo, MgO, CaO, Na/sub 2/O, K/sub 2/O, TiO/sub 2/, MnO, P/sub 2/O/sub 5/, H/sub 2/O, CO/sub 2/, Ag, Au, Ba, Cu, Pb, Rb, Sr, Tl, and Zn. A comparison of major and trace elements shows that the altered granodiorite is enriched in SiO/sub 2/, Fe/sub 2/O/sub 3/, K/sub 2/O, Ag, Au, Ba, Cu, Pb, Rb, Tl, and Zn and depleted in Al/sub 2/O/sub 3/, FeO, MgO, CaO, Na/sub 2/O, TiO/sub 2/, MnO, P/sub 2/O/sub 5/, and Sr. The average contents of Au in unaltered and altered granodiorite and quartz veins are 9 ppb. 270 ppb and 1020 ppb respectively. The average Ba/Tl ratio in the altered samples decrease and average Rb/Sr and Tl/Sr ratios increase. K, Rb, and Tl are enriched in the altered granodiorite by factors of 1.5, 1.6, and 1.4 respectively. Tl is not enriched relative to Rb and K in the altered samples due to the high temperature of the deposit. The Ba/Tl, K/Tl and K/Rb ratios do not show complete separation of altered from unaltered samples. However, the Ba/Tl and K/Tl ratios in the quartz vein are significantly lower than the unaltered and altered granodiorite. This is due to the enrichment of Tl over K and Rb in the quartz veins. The Rb/Sr and Tl/Sr ratios are higher in the altered granodiorite and quartz veins compared to unaltered samples. The enrichment of Tl and presence of low Ba/Tl and high Rb/Sr and Tl/Sr ratios in a granodiorite indicate that the rocks are hydrothermally altered and represent a possible Au-Ag target.

  9. Preparation of Au-Pt nanostructures by combining top-down with bottom-up strategies and application in label-free electrochemical immunosensor for detection of NMP22.

    PubMed

    Jia, Hongying; Gao, Picheng; Ma, Hongmin; Wu, Dan; Du, Bin; Wei, Qin

    2015-02-01

    A novel label-free amperometric immunosensor for sensitive detection of nuclear matrix protein 22 (NMP22) was developed based on Au-Pt bimetallic nanostructures, which were prepared by combining top-down with bottom-up strategies. Nanoporous gold (NPG) was prepared by "top-down" dealloying of commercial Au/Ag alloy film. After deposition of NPG on an electrode, Pt nanoparticles (PtNPs) were further decorated on NPG by "bottom-up" electrodeposition. The prepared bimetallic nanostructures combine the merits of both NPG and PtNPs, and show a high electrocatalytic activity towards the reduction of H2O2. The label-free immunosensor was constructed by directly immobilizing antibody of NMP22 (anti-NMP22) on the surface of bimetallic nanostructures. The immunoreaction induced amperometric response could be detected and negatively correlated to the concentration of NMP22. Bimetallic nanostructure morphologies and detection conditions were investigated to obtain the best sensing performance. Under the optimal conditions, a linear range from 0.01ng/mL to 10ng/mL and a detection limit of 3.33pg/mL were obtained. The proposed immunosensor showed high sensitivity, good selectivity, stability, reproducibility, and regeneration for the detection of NMP22, and it was evaluated in urine samples, receiving satisfactory results.

  10. In situ measurements of change in work function of Pt, Pd and Au surfaces during desorption of oxygen by using photoemission yield spectrometer in air

    NASA Astrophysics Data System (ADS)

    Yamashita, Daisuke; Ishizaki, Atsushi

    2016-02-01

    We investigated the change in work function of Pt, Pd and Au surfaces during desorption of oxygen by using a photoemission yield spectrometer with an open counter. Oxygen coverage was formed by UV/ozone treatment, and then continuous change in work function with exposure to air was observed at various temperatures. Work function of Pt, Pd and Au surfaces decreased during desorption of oxygen, and finally returned to the initial value of untreated surfaces. Furthermore, temperature dependence on the change in work function was found. These characteristics were explained using chemical kinetics scheme. The exponential decay of work function was well reproduced by the first-order reaction rate equation, and it was confirmed that the order of rate constant, kr, is kr(Au) < kr(Pd) < kr(Pt). The activation energy was estimated to be 36, 38 and 28 kJ/mol for Pt, Pd, Au, respectively.

  11. Ehrlich-Schwöbel barriers and adsorption of Au, Cu and Ag stepped (100) surfaces

    NASA Astrophysics Data System (ADS)

    Benlattar, M.; Elkoraychy, E.; Sbiaai, K.; Mazroui, M.; Boughaleb, Y.

    2017-02-01

    We use a combination of quenched molecular dynamics and embedded atom method to calculate the activation energy barriers for the hopping and exchange mechanisms of Au, Ag or Cu on Au(100), Ag(100) or Cu(100) stepped surfaces. Our findings show that the Ehrlich-Schwöbel (ES) barriers for an adatom to undergo jump or exchange at a step edge are found to be dependent of the nature of substrate stepped surfaces. We also find that the ES barriers for the hopping processes are too high, except for Cu/Au(100). While for exchange process the Ehrlich-Schwöbel barriers are found to be very low and even negative. These ES barriers can explain the difference in the growth modes for the different systems. On the other hand, we calculated the adsorption energies at the most stable adsorption sites near step edges. In particular, we wish to clarify the relation between the adatom diffusion energy barriers and the adatom adsorption energies. These results may serve as some guiding rules for studying stepped surface morphologies, which are of importance to surface nanoengineering.

  12. Luminescent Di and Polynuclear Organometallic Gold(I)-M (Au2, {Au2Ag}n and {Au2Cu}n) Compounds Containing Bidentate Phosphanes as Active Antimicrobial Agents

    PubMed Central

    Frik, Malgorzata; Jiménez, Josefina; Gracia, Ismael; Falvello, Larry R.; Abi-Habib, Sarya; Suriel, Karina; Muth, Theodore R.

    2012-01-01

    The reaction of new dinuclear gold(I) organometallic complexes containing mesityl ligands and bridging bidentate phosphanes [Au2(mes)2(μ-LL)] (LL = dppe: 1,2-Bis(di-phenylphosphano)ethane 1a, and water-soluble dppy: 1,2-Bis(di-3-pyridylphosphano)ethane 1b) with Ag+ and Cu+ lead to the formation of a family of heterometallic clusters with mesityl bridging ligands of the general formula [Au2M(μ-mes)2(μ-LL)]A (M = Ag, A = ClO4−, L-L = dppe 2a, dppy 2b; M = Ag, A = SO3CF3−, L-L = dppe 3a, dppy 3b; M = Cu, A = PF6−, L-L = dppe 4a, dppy 4b). The new compounds were characterized by different spectroscopic techniques and mass spectrometry The crystal structures of [Au2(mes)2(μ-dppy)] 1b and [Au2Ag(μ-mes)2(μ-dppe)]SO3CF3 3a were determined by a single-crystal X-ray diffraction study. 3a in solid state is not a cyclic trinuclear Au2Ag derivative but it gives an open polymeric structure instead, with the {Au2(μ-dppe)} fragments “linked” by Ag(μ-mes)2 units. The very short distances of 2.7559(6) Å (Au-Ag) and 2.9229(8) Å (Au-Au) are indicative of gold-silver (metallophillic) and aurophilic interactions. A systematic study of their luminescence properties revealed that all compounds are brightly luminescent in solid state, at room temperature (RT) and at 77 K, or in frozen DMSO solutions with lifetimes in the microsecond range and probably due to the self-aggregation of [Au2M(μ-mes)2(μ-LL)]+ units (M= Ag or Cu; LL= dppe or dppy) into an extended chain structure, through Au-Au and/or Au-M metallophylic interactions, as that observed for 3a. In solid state the heterometallic Au2M complexes with dppe (2a–4a) show a shift of emission maxima (from ca. 430 to the range of 520–540 nm) as compared to the parent dinuclear organometallic product 1a while the complexes with dppy (2b–4b) display a more moderate shift (505 for 1b to a max of 563 nm for 4b). More importantly, compound [Au2Ag(μ-mes)2(μ-dppy)]ClO4 2b resulted luminescent in diluted DMSO solution

  13. Physico-chemical and antimicrobial properties of co-sputtered Ag Au/PTFE nanocomposite coatings

    NASA Astrophysics Data System (ADS)

    Zaporojtchenko, V.; Podschun, R.; Schürmann, U.; Kulkarni, A.; Faupel, F.

    2006-10-01

    In this work, we used co-sputtering of noble metals together with polytetrafluorethylene (PTFE) as a method for producing antibacterial metal/polymer nanocomposite coatings, where the precious metals are only incorporated in a thin surface layer. Moreover, they are finely dispersed as nanoparticles, thus saving additional material and providing a very large effective surface for metal ion release. Nanocomposite films with thickness between 100 and 300 nm were prepared with a wide range of metal filling between 10 and 40%. The antimicrobial effect of the nanocomposite coatings was evaluated by means of two different assays. The bactericidal activity due to silver release from the surface was determined by a modification of conventional disc diffusion methods. Inhibition of bacterial growth on the coated surface was investigated through a modified proliferation assay. Staphylococcus aureus and S. epidermidis were used as test bacteria, as these species commonly cause infections associated with medical polymer devices. The antibacterial efficiency of the coatings against different bacteria was demonstrated at extremely small noble metal consumption: Au: ~1 mg m-2 and Ag: ~0.1 g m-2. The maximum ability for having an antibacterial effect was shown by the Ag-Au/PTFE nanocomposite, followed by the Ag/PTFE nanocomposite.

  14. Cysteamine coated Ag and Au nanorods for improved surface enhanced Raman scattering from dinitrotoluene and trinitrotoluene

    NASA Astrophysics Data System (ADS)

    Glembocki, O. J.; Gowda, M.; Geng, S.; Prokes, S. M.; Garces, N. Y.; Cushen, J.; Caldwell, J. D.

    2010-08-01

    Surface-enhanced Raman scattering (SERS) from trinitrotoluene and other nitro-based explosives is important for the development of a reliable detection scheme exhibiting low false-positive rates. However, the interaction of these compounds with Ag and Au causes the molecules to orient in ways such that the primary vibrations of the nitro groups, the main identifying Raman marker of these compounds, are inhibited in addition to causing a reduction in the SERS response. It has recently been shown that cysteamine, which contains amine functional end groups, will electrostatically attract the nitro groups of TNT. Therefore, as the thiol functional group of cysteamine chemically bonds this molecule to the plasmonically-active Au and Ag nanoparticles studied, SERS of TNT can be obtained following the nitro-amine functional group complex formation. It is observed that the cysteamine adsorbs in one of two configurations on the metal surface, with the trans configuration consisting of bonding at the S end of the molecule and the cysteamine is perpendicular to the metal surface, while in the Gauche configuration S bonding occurs, but the molecule bends over towards the metal film surface, approaching the parallel configuration allowing the amine groups interact with the surface. We find that the trans configuration is best for the detection of SERS from TNT. Experiments compare well with DFT calculations of the cysteamine and TNT complex and their adsorption on Ag.

  15. Relativistic and Correlation Effects in CuH, AgH and AuH: Comparison of Various Relativistic Methods

    NASA Technical Reports Server (NTRS)

    Collins, Charlene L.; Dyall, Kenneth G.; Schaefer, Henry F., III

    1994-01-01

    The effects of relativity on the bond lengths, dissociation energies, and harmonic vibrational frequencies of the 1Epsilon(+) electronic ground states of the group IB hydrides CuH, AgH and AuH have been evaluated with a variety of ab initio methods. These properties were investigated with moderately-sized basis sets at the self-consistent field Hartree Fock (SCF HF) level and with second-order Moller-Plesset (MP2) perturbation theory for electron correlation. Comparisons were made between all-electron results using the nonrelativistic Hamiltonian, perturbation theory (PT) at first-order with only the one-electron non-fine structure terms of the Breit-Pauli Hamiltonian, the spin-free Douglas-Kroll (DK) transformed Dirac Hamiltonian and the untransformed Dirac Hamiltonian, and results using two sets of relativistic effective core potentials (RECPs). The expected trends of bond length decrease, dissociation energy increase and harmonic frequency increase with both relativity and correlation are found. Both sets of RECPs are shown to give good results, if accompanied by a reasonable basis set. The DK method is demonstrated to be an inexpensive, reliable approximation to the DHF method.

  16. The effect of nanoparticles size on photocatalytic and antimicrobial properties of Ag-Pt/TiO2 photocatalysts

    NASA Astrophysics Data System (ADS)

    Zielińska-Jurek, Anna; Wei, Zhishun; Wysocka, Izabela; Szweda, Piotr; Kowalska, Ewa

    2015-10-01

    Ag-Pt-modified TiO2 nanocomposites were synthesized using the sol-gel method. Bimetallic modified TiO2 nanoparticles exhibited improved photocatalytic activity under visible-light irradiation, better than monometallic Ag/TiO2 and Pt/TiO2 nanoparticles (NPs). All modified powders showed localized surface plasmon resonance (LSPR) in visible region. The photocatalysts' characteristics by X-ray diffractometry (XRD), scanning transmission electron microscopy (STEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption (BET method for specific surface area) showed that sample with the highest photocatalytic activity had anatase structure, about 93 m2/g specific surface area, maximum plasmon absorption at ca. 420 nm and contained small NPs of silver of 6 nm and very fine platinum NPs of 3 nm. The photocatalytic activity was estimated by measuring the decomposition rate of phenol in 0.2 mM aqueous solution under Vis and UV/vis light irradiation. It was found that size of platinum was decisive for the photocatalytic activity under visible light irradiation, i.e., the smaller Pt NPs were, the higher was photocatalytic activity. While, antimicrobial activities, estimated for bacteria Escherichia coli and Staphylococcus aureus, and pathogenic fungi belonging to Candida family, were only observed for photocatalysts containing silver, i.e., Ag/TiO2 and Ag-Pt/TiO2 nanocomposites.

  17. Activities and Stabilities of Au-Modified Stepped-Pt Single-Crystal Electrodes as Model Cathode Catalysts in Polymer Electrolyte Fuel Cells.

    PubMed

    Kodama, Kensaku; Jinnouchi, Ryosuke; Takahashi, Naoko; Murata, Hajime; Morimoto, Yu

    2016-03-30

    The purpose of this study is to test the concept of protecting vulnerable sites on cathode catalysts in polymer electrolyte fuel cells. Pt single-crystal surfaces were modified by depositing Au atoms selectively on (100) step sites and their electrocatalytic activities for oxygen reduction reaction (ORR) and stabilities against potential cycles were examined. The ORR activities were raised by 70% by the Au modifications, and this rise in the activity was ascribed to enhanced local ORR activities on Pt(111) terraces by the surface Au atoms. The Au modifications also stabilized the Pt surfaces against potential cycles by protecting the low-coordinated (100) step sites from surface reorganizations. Thus, the surface modification by selective Au depositions on vulnerable sites is a promising method to enhance both the ORR activity and durability of the catalysts.

  18. Nanoparticles of Ag with a Pt and Pd rich surface supported on carbon as a new catalyst for the oxygen electroreduction reaction (ORR) in acid electrolytes: Part 2

    NASA Astrophysics Data System (ADS)

    Pech-Pech, I. E.; Gervasio, Dominic F.; Pérez-Robles, J. F.

    2015-02-01

    In the first part of this work, the feasibility of developing a catalyst with high activity for the oxygen electroreduction reaction (ORR) in acid media and with low Pt loading was demonstrated by over coating a silver (Ag) nanoparticle with a shell of platinum (Pt) and palladium (Pd) [7]. The results show that best activity is not directly related to a higher PtPd loading on the surface of the Ag. The best catalyst in a series of this type of catalyst is found with Ag@Pt0.3Pd0.3/C which gives a specific activity for oxygen reduction, jk (in units of mA cm-2 of real area), of 0.07 mA cm-2 at 0.85 V vs. NHE, as compared to 0.04 mA cm-2 when with a commercial Pt on carbon catalyst (Pt20/C) is used in an identical electrode except for the catalyst. The mass activity, jm (in units of mA μg-1 of Pt), for Ag@Pt0.3Pd0.3/C is 0.04 mA μg-1 of Pt at 0.85 V vs. NHE, whereas that for the Pt20/C gives 0.02 mA μg-1 of Pt, showing Ag@Pt0.3Pd0.3/C is a lower-cost catalyst, because using a Ag core and Pd with Pt in the shell gives the highest catalytic activity using less Pt.

  19. First Principles Calculations on the Diffusion of Cu, Ag and Au Atoms or Aggregates on the Bulk and Surface of Titania

    DTIC Science & Technology

    2011-04-01

    AFRL-AFOSR-UK-TR-2011-0002 First Principles Calculations on the Diffusion of Cu, Ag and Au Atoms or Aggregates on the Bulk and...SUBTITLE First Principles Calculations on the Diffusion of Cu, Ag and Au Atoms or Aggregates on the Bulk and Surface of Titania 5a. CONTRACT...093072 Final report First principles calculations on the diffusion of Cu, Ag and Au atoms or aggregates on the bulk and surface of titania List

  20. Low-temperature formation of the FePt phase in the presence of an intermediate Au layer in Pt /Au /Fe thin films

    NASA Astrophysics Data System (ADS)

    Vladymyrskyi, I. A.; Gafarov, A. E.; Burmak, A. P.; Sidorenko, S. I.; Katona, G. L.; Safanova, N. Y.; Ganss, F.; Beddies, G.; Albrecht, M.; Makogon, Yu N.; Beke, D. L.

    2016-01-01

    Pt /Fe and Pt /Au /Fe layered films were deposited at room temperature by dc magnetron sputtering on Al2O3(0 0 0 1) single crystalline substrates and heat treated in vacuum at 330 °C with different durations (up to 62 h). It is shown by secondary neutral mass spectrometry depth profiling and x-ray diffraction that the introduction of an additional Au layer between Pt /Fe layers leads to enhanced intermixing and formation of the partially chemically ordered L10 FePt phase. The underlying diffusion processes can be explained by the grain boundary diffusion induced reaction layer formation mechanism. During the solid state reaction between Pt and Fe, the Au layer moves towards the substrate interface replacing the Fe layer. This was explained by the much faster diffusion of Fe, as compared to Pt, along the grain boundaries in Au. Enhancement of the process and formation of the ordered FePt phase in the presence of the Au intermediate layer were interpreted by the effect of stress accumulation during the grain boundary reactions: the disordered FePt phase formed initially at different Au and Pt grain boundaries can experience appropriate compressive stress along the {1 0 0} directions, which can initiate the formation of the chemically ordered L10 FePt phase.

  1. Folic acid bio-inspired route for facile synthesis of AuPt nanodendrites as enhanced electrocatalysts for methanol and ethanol oxidation reactions

    NASA Astrophysics Data System (ADS)

    Wang, Ai-Jun; Ju, Ke-Jian; Zhang, Qian-Li; Song, Pei; Wei, Jie; Feng, Jiu-Ju

    2016-09-01

    Folic acid (FA), as an important biomolecule in cell division and growth, is firstly employed as the structure director and stabilizing agent for controlled synthesis of uniform Au65Pt35 nanodendrites (NDs) by a one-pot wet-chemical bio-inspired route at room temperature. No pre-seed, template, organic solvent, polymer, surfactant or complex instrument is involved. The products are mainly characterized by transmission electron microscopy (TEM), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), and X-Ray photoelectron spectroscopy (XPS). The architectures have enlarged electrochemically active surface area (60.6 m2 gPt-1), enhanced catalytic activity and durability for methanol and ethanol oxidation in contrast with commercial Pt black and the other AuPt alloys by tuning the molar ratios of Au to Pt (e.g., Au31Pt69 and Au82Pt18 nanoparticles). This strategy would be applied to fabricate other bimetallic nanocatalysts in fuel cells.

  2. Investigation of oxygen reduction and methanol oxidation reaction activity of PtAu nano-alloy on surface modified porous hybrid nanocarbon supports

    NASA Astrophysics Data System (ADS)

    Parambath Vinayan, Bhaghavathi; Nagar, Rupali; Ramaprabhu, Sundara

    2016-09-01

    We investigate the electrocatalytic activity of PtAu alloy nanoparticles supported on various chemically modified carbon morphologies towards oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR). The surface-modification of graphene nanosheets (f-G), multi-walled carbon nanotubes (f-MWNTs) and (graphene nanosheets-carbon nanotubes) hybrid support (f-G-MWNTs) were carried out by soft functionalization method using a cationic polyelectrolyte poly-(diallyldimethyl ammonium chloride). The Pt and PtAu alloy nanoparticles were dispersed over chemically modified carbon supports by sodium-borohydride assisted modified polyol reduction method. The electrochemical performance of all electrocatalysts were studied by half- and full-cell proton exchange membrane fuel cell (PEMFC) measurements and PtAu/f-G-MWNTs catalyst comparatively yielded the best catalytic performance. PEMFC full cell measurements of PtAu/f-G-MWNTs cathode electrocatalyst yield a maximum power density of 319 mW cm-2 at 60 °C without any back pressure,which is 2.1 times higher than that of cathode electrocatalyst Pt on graphene support. The high ORR and MOR activity of PtAu/f-G-MWNTs electrocatalyst is due to the alloying effect and inherent beneficial properties of porous hybrid nanocarbon support.

  3. Construction of Au@Pt core—satellite nanoparticles based on in-situ reduction of polymeric ionic liquid protected gold nanoparticles

    NASA Astrophysics Data System (ADS)

    Wu, Wenlan; Li, Junbo; Zou, Sheng; Guo, Jinwu; Zhou, Huiyun

    2017-01-01

    A method of in-situ reduction to prepare Au@Pt core-satellite nanoparticles (NPs) is described by using Au NPs coating poly[1-methyl 3-(2-methacryloyloxy propylimidazolium bromine)] (PMMPImB-@-Au NPs) as the template. After electrostatic complex chloroplatinic acid with PMMPImB shell, the composite NP was directly reduced with N2H4 to produce Au@Pt core-satellite NPs. The characterization of composite and core-satellite NPs under different amounts of chloroplatinic acid were studied by DLS, UV-vis absorption spectrum and TEM. The satellite Pt NPs with a small size ( 2 nm) dotted around Au core, and the resulting Au@Pt core-satellite NPs showed a red-shift surface plasmon resonance (SPR) and a good dispersion due to effectively electrostatic repulsion providing by the polymeric ionic liquid (PIL) shell. Finally, Au@Pt core-satellite NPs exhibit an enhanced catalytic activity and cycled catalytic capability for the reduction of p-nitrophenol with NaBH4.

  4. Construction of Au@Pt core—satellite nanoparticles based on in-situ reduction of polymeric ionic liquid protected gold nanoparticles

    NASA Astrophysics Data System (ADS)

    Wu, Wenlan; Li, Junbo; Zou, Sheng; Guo, Jinwu; Zhou, Huiyun

    2017-03-01

    A method of in-situ reduction to prepare Au@Pt core-satellite nanoparticles (NPs) is described by using Au NPs coating poly[1-methyl 3-(2-methacryloyloxy propylimidazolium bromine)] (PMMPImB-@-Au NPs) as the template. After electrostatic complex chloroplatinic acid with PMMPImB shell, the composite NP was directly reduced with N2H4 to produce Au@Pt core-satellite NPs. The characterization of composite and core-satellite NPs under different amounts of chloroplatinic acid were studied by DLS, UV-vis absorption spectrum and TEM. The satellite Pt NPs with a small size ( 2 nm) dotted around Au core, and the resulting Au@Pt core-satellite NPs showed a red-shift surface plasmon resonance (SPR) and a good dispersion due to effectively electrostatic repulsion providing by the polymeric ionic liquid (PIL) shell. Finally, Au@Pt core-satellite NPs exhibit an enhanced catalytic activity and cycled catalytic capability for the reduction of p-nitrophenol with NaBH4.

  5. The IP6 micelle-stabilized small Ag cluster for synthesizing Ag-Au alloy nanoparticles and the tunable surface plasmon resonance effect

    NASA Astrophysics Data System (ADS)

    Wang, Na; Wen, Ying; Wang, Yao; Zhang, Rui; Chen, Xiyao; Ling, Bo; Huan, Shuangyan; Yang, Haifeng

    2012-04-01

    The stable small Ag seeds (size in diameter < 10 nm) were obtained in the presence of inositol hexakisphosphoric (IP6) micelles. Then Ag-Au bimetallic nanoparticles were synthesized through a replacement reaction with the rapid interdiffusion process between such small Ag seeds in nanoclusters and HAuCl4. Adjusting the dosage of HAuCl4 resulted in different products, which possessed unique surface plasmon resonances (SPR). The morphologies of the as-made nanoparticles were observed using transmission electron microscopy and field emission scanning electron microscopy and their compositions were determined by energy-dispersive x-ray spectroscopy. Among them, the Ag-Au alloy nanoparticles with the cauliflower-like structure had a suitable SPR for highly sensitive Raman detection application as a surface-enhanced Raman scattering (SERS) substrate with a long-term stability of six months.

  6. Chitosan stabilized Ag-Au nanoalloy for colorimetric sensing and 5-Fluorouracil delivery.

    PubMed

    E A K, Nivethaa; S, Dhanavel; Narayanan, V; A, Stephen

    2017-02-01

    Fluorescent CS/Ag-Au (chitosan/silver-gold) nanocomposite containing different weight percentage of Ag and Au was synthesized using the chemical reduction method. 5-Fluorouracil (5-FU) encapsulated nanocomposite was also synthesized and its cytotoxicity towards breast cancer cell lines (MCF-7) studied. The XRD pattern of the nanocomposite shows peaks of chitosan, silver and gold. The peaks corresponding to gold and silver indicate the face centered cubic structure of silver and gold nanoparticles. The polymer matrix nanocomposite structure with chitosan as the matrix and silver-gold as the filler phase is evident from the high resolution transmission electron microscopy (HRTEM) images and an increase in particle size from∼5nm to about 12nm is noticeable on encapsulation of 5-Fluorouracil (5-FU). The presence of fluorine in the case of 5-FU encapsulated nanocomposite and the presence of reflections corresponding to 5-FU in the SAED pattern confirms the encapsulation of 5-FU into the nanocomposite, which is also confirmed by elemental mapping. The presence of a single surface plasmon resonance (SPR) peak in the case of the nanocomposite in a position in between the SPR bands of pure silver and gold nanoparticles confirms the formation of Ag-Au alloy and the elemental mapping results obtained for the nanocomposite also supports the UV-vis results. The photoluminescence (PL) spectrum clearly shows an emission peak in the near infrared region (700-900nm), which makes the nanocomposite suitable for use in cellular imaging. The application of the nanocomposite as a colorimetric sensor was also studied and it was found to be useful for the specific detection of mercury (Hg) without much interference and the detection limit was found to be 5.0×10(-8)M.

  7. Relativistic effects on the nuclear magnetic shielding in the MF (M=Cu, Ag, Au) series

    SciTech Connect

    David, Jorge; Restrepo, Albeiro

    2007-11-15

    Relativistic effects on the nuclear magnetic shielding {sigma}(M) of the series of diatomics MF (M=Cu, Ag, Au) are calculated and analyzed using the Dirac-Hartree-Fock (DHF) method in the random phase approximation (RPA). Significant differences due to relativistic effects on the shielding constant {sigma}(M) are found in this series of atoms. The high electronegativity of the fluorine atom works in conjunction with the spin-orbit coupling to increase the calculated value for {sigma}(Au). An unusually large diamagnetic contribution to the shielding constant is observed. Nonrelativistic nuclear magnetic shielding [{sigma}{sup NR}(M)] shows very good linear correlation with the nuclear charge (Z) of the metal, while the relativistic shielding [{sigma}{sup rel}(M)] varies as Z{sup 2.26}.

  8. Preparation of Ag/Au bimetallic nanostructures and their application in surface-enhanced fluorescence.

    PubMed

    Dong, Jun; Ye, Yanyan; Zhang, Wenhui; Ren, Zebin; Huo, Yiping; Zheng, Hairong

    2015-11-01

    An effective substrate for surface-enhanced fluorescence, which consists of cluster Ag/Au bimetallic nanostructures on a copper surface, was synthesized via a multi-stage galvanic replacement reaction of a Ag cluster in a chlorauric acid (HAuCl4) solution at room temperature. The fabricated silver/gold bimetallic cluster were found to yield large surface-enhanced fluorescence (SEF) enhancement factors for rhodamine 6G probe molecules deposited on the substrate, and also the fluorescence efficiency is critically dependent on the period of nanostructure growth. With the help of proper control reaction conditions, such as the reaction time, and concentration of reaction solutions, the maximum fluorescence enhanced effect was obtained. Therefore, the bimetallic nanostructure substrate also can be adapted to studies in SEF, which will expand the application of SEF.

  9. Femtosecond spectroscopy of electron-electron and electron-phonon energy relaxation in Ag and Au

    NASA Astrophysics Data System (ADS)

    Groeneveld, Rogier H. M.; Sprik, Rudolf; Lagendijk, Ad

    1995-05-01

    We show experimentally that the electron distribution of a laser-heated metal is a nonthermal distribution on the time scale of the electron-phonon (e-ph) energy relaxation time τE. We measured τE in 45-nm Ag and 30-nm Au thin films as a function of lattice temperature (Ti=10-300 K) and laser-energy density (Ul=0.3-1.3 J cm-3), combining femtosecond optical transient-reflection techniques with the surface-plasmon polariton resonance. The experimental effective e-ph energy relaxation time decreased from 710-530 fs and 830-530 fs for Ag and Au, respectively, when temperature is lowered from 300 to 10 K. At various temperatures we varied Ul between 0.3-1.3 J cm-3 and observed that τE is independent from Ul within the given range. The results were first compared to theoretical predictions of the two-temperature model (TTM). The TTM is the generally accepted model for e-ph energy relaxation and is based on the assumption that electrons and lattice can be described by two different time-dependent temperatures Te and Ti, implying that the two subsystems each have a thermal distribution. The TTM predicts a quasiproportional relation between τE and Ti in the perturbative regime where τE is not affected by Ul. Hence, it is shown that the measured dependencies of τE on lattice temperature and energy density are incompatible with the TTM. It is proven that the TTM assumption of a thermal electron distribution does not hold especially under our experimental conditions of low laser power and lattice temperature. The electron distribution is a nonthermal distribution on the picosecond time scale of e-ph energy relaxation. We developed a new model, the nonthermal electron model (NEM), in which we account for the (finite) electron-electron (e-e) and electron-phonon dynamics simultaneously. It is demonstrated that incomplete electron thermalization yields a slower e-ph energy relaxation in comparison to the thermalized limit. With the NEM we are able to give a consistent

  10. Heterodiffusion of Ag adatoms on imperfect Au(1 1 0) surfaces

    NASA Astrophysics Data System (ADS)

    El koraychy, E.; Sbiaai, K.; Mazroui, M.; Ferrando, R.; Boughaleb, Y.

    2017-02-01

    The hetero-diffusion of Ag adatoms on imperfect Au(1 1 0) surfaces is studied using Molecular Dynamics (MD) simulations. The atomic interactions are described by an Embedded Atom Method (EAM) potential. Static activation energies governing various diffusion processes (jumps and exchanges) are calculated by quenched MD, finding that activation energies for interlayer mobility at straight step edges are somewhat larger than those on the flat surface in the cross-channel [1 0 0]-direction, while interlayer barriers at kinks are considerably lower. Dynamic activation energies are calculated at high temperature from the Arrhenius plots of different diffusion mechanisms and compared to static barriers.

  11. The alloying effect and AgCl-directing growth for synthesizing a trimetallic nanoring with improved SERS

    NASA Astrophysics Data System (ADS)

    Han, Shuhua; Zhou, Guangju; Fu, Yunzhi; Ma, Ying; Xu, Li; Zou, Chao; Chen, Wei; Yang, Yun; Huang, Shaoming

    2015-12-01

    We report the synthesis of high quality trimetallic Au/Ag/Pt nanorings (TAAPNs) by using Au/Ag alloy decahedra (AAAD) as templates. The alloying effect and AgCl-directing growth have been investigated in detail during the formation of TAAPN. It was found that the doping of Ag in AAAD changes the surrounding environment of Au atoms and decreases the oxidization reduction potential (ORP) of [AuCl2]-/Au because of the alloying effect, resulting in the dissolved O2 molecules that serve as an effective etchant for oxidizing Au to Au(i). Ascorbic acid (AA) and chloroplatinic acid (H2PtCl6) are weak acids which can accelerate the etching by increasing the concentration of H+. The AgCl selectively absorbs on {100} of the decahedra and induces the preferential deposition of H2PtCl6 here via their complexing interaction. AA reduces Pt(iv) and Ag(i) to atoms which grow on {100} facets. The formed Pt/Ag layer changes the etching direction from along [100] to [111] and generates the TAAPN. Besides, it has been noted that the TAAPNs exhibit good Surface Enhanced Raman Scattering (SERS) performance.We report the synthesis of high quality trimetallic Au/Ag/Pt nanorings (TAAPNs) by using Au/Ag alloy decahedra (AAAD) as templates. The alloying effect and AgCl-directing growth have been investigated in detail during the formation of TAAPN. It was found that the doping of Ag in AAAD changes the surrounding environment of Au atoms and decreases the oxidization reduction potential (ORP) of [AuCl2]-/Au because of the alloying effect, resulting in the dissolved O2 molecules that serve as an effective etchant for oxidizing Au to Au(i). Ascorbic acid (AA) and chloroplatinic acid (H2PtCl6) are weak acids which can accelerate the etching by increasing the concentration of H+. The AgCl selectively absorbs on {100} of the decahedra and induces the preferential deposition of H2PtCl6 here via their complexing interaction. AA reduces Pt(iv) and Ag(i) to atoms which grow on {100} facets. The formed

  12. Fabrication of Au@Ag core-shell NPs as enhanced CT contrast agents with broad antibacterial properties.

    PubMed

    Huo, Da; He, Jian; Li, Hui; Yu, Haiping; Shi, Tingting; Feng, Yahui; Zhou, Zhengyang; Hu, Yong

    2014-05-01

    Au@Ag core-shell nanoparticles (NPs) integrating both antibacterial and X-ray attenuation capabilities were facilely synthesized in aqueous solution. These NPs modified with methoxy-PEG-SH (m-PEG) on the surface rendered them favorable dispersity and stability in water, resulting in enhancement of their blood circulation time. X-ray photoelectron spectroscope (XPS) and high-resolution transmission electron microscope (HRTEM) results confirmed the core-shell structure of m-PEG-Au@Ag NPs. The m-PEG-Au@Ag NPs showed low cytotoxicity and strong X-ray absorption potency in vitro. Further in vivo study showed that as-synthesized NPs offered a pronounced contrast and prolonged their circulation time in the blood stream with negligible toxic effect in vivo. Besides, m-PEG-Au@Ag NPs had significant bacteriostatic effect toward common bacteria like Escherichia coli and Staphylococcus aureus as demonstrated by broth dilution assay. Given their low-cytotoxicity and high CT attenuation efficacy, m-PEG-Au@Ag NPs had a promising potential for use as CT enhancing and antibacterial agents.

  13. Effect of gold subsurface layer on the surface activity and segregation in Pt/Au/Pt{sub 3}M (where M = 3d transition metals) alloy catalyst from first-principles

    SciTech Connect

    Kim, Chang-Eun; Lim, Dong-Hee; Jang, Jong Hyun; Kim, Hyoung Juhn; Yoon, Sung Pil; Han, Jonghee; Nam, Suk Woo; Hong, Seong-Ahn; Soon, Aloysius E-mail: hchahm@kist.re.kr; Ham, Hyung Chul E-mail: hchahm@kist.re.kr

    2015-01-21

    The effect of a subsurface hetero layer (thin gold) on the activity and stability of Pt skin surface in Pt{sub 3}M system (M = 3d transition metals) is investigated using the spin-polarized density functional theory calculation. First, we find that the heterometallic interaction between the Pt skin surface and the gold subsurface in Pt/Au/Pt{sub 3}M system can significantly modify the electronic structure of the Pt skin surface. In particular, the local density of states projected onto the d states of Pt skin surface near the Fermi level is drastically decreased compared to the Pt/Pt/Pt{sub 3}M case, leading to the reduction of the oxygen binding strength of the Pt skin surface. This modification is related to the increase of surface charge polarization of outmost Pt skin atoms by the electron transfer from the gold subsurface atoms. Furthermore, a subsurface gold layer is found to cast the energetic barrier to the segregation loss of metal atoms from the bulk (inside) region, which can enhance the durability of Pt{sub 3}M based catalytic system in oxygen reduction condition at fuel cell devices. This study highlights that a gold subsurface hetero layer can provide an additional mean to tune the surface activity toward oxygen species and in turn the oxygen reduction reaction, where the utilization of geometric strain already reaches its practical limit.

  14. Bifunctional Ag@SiO 2 /Au Nanoparticles for Probing Sequential Catalytic Reactions by Surface-Enhanced Raman Spectroscopy

    DOE PAGES

    Wu, Yiren; Su, Dong; Qin, Dong

    2017-02-22

    Here, we report the synthesis of bifunctional Ag@SiO2/Au nanoparticles with an “islands in the sea” configuration by titrating HAuCl4 solution into an aqueous suspension of Ag@SiO2 core–shell nanocubes in the presence of NaOH, ascorbic acid, and poly(vinyl pyrrolidone) at pH 11.9. The NaOH plays an essential role in generating small pores in the SiO2 shell in situ, followed by the epitaxial deposition of Au from the Ag surface through the pores, leading to the formation of Au islands (6–12 nm in size) immersed in a SiO2 sea. Furthermore, by controlling the amount of HAuCl4 titrated into the reaction system, themore » Au islands can be made to pass through and protrude from the SiO2 shell, embracing catalytic activity toward the reduction of 4-nitrophenol to 4-aminophenol by NaBH4. And while the Ag in the core provides a strong surface-enhanced Raman scattering activity, the SiO2 sea helps maintain the Au component as compact, isolated, and stabilized islands. The Ag@SiO2/Au nanoparticles can serve as a bifunctional probe to monitor the stepwise Au-catalyzed reduction of 4-nitrothiophenol to 4-aminothiophenol by NaBH4 and Ag-catalyzed oxidation of 4-aminothiophenol to trans-4,4'-dimercaptoazobenzene by the O2 from air in the same reaction system.« less

  15. Surface enhanced Raman spectroscopy of self-assembled layers of lipid molecules on nanostructured Au and Ag substrates.

    PubMed

    Slekiene, Nora; Ramanauskaite, Lina; Snitka, Valentinas

    2017-03-01

    In this work surface enhanced Raman spectroscopy (SERS) has been used for the investigation of the self-assembled layers of lipid molecules (SALLMs) deposited on the nanostructured Au and Ag surfaces. The SALLMs were prepared from one part of 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) and four parts of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) lipids. The synthesis of Au and Ag SERS substrates was based on the direct gold and silver ions reduction onto HF etched silicon wafers. Au SERS substrates were not suitable for the formation of SALLMs because of the inappropriate contact angle of surface. It was found that the formation of the SALLM does not take place on Au SERS substrate. However, it has been shown that the modification of Au SERS substrate with 1-dodecanothiol layer allows building the SALLM on its surface. In the case of Ag SERS substrate, the SALLM was deposited directly on its surface. The SERS spectra of the SALLMs were recorded in the CH stretching (2800-3000cm(-1)) and the fingerprint (<1.800cm(-1)) regions. It has been demonstrated that the SERS spectra of the SALLM recorded on Au substrate differs from that one recorded on Ag SERS substrate. These spectral differences were found to be determined by the different interaction mechanisms of the lipid molecules with nanostructured surfaces.

  16. Localized surface plasmon resonance-based hybrid Au-Ag nanoparticles for detection of Staphylococcus aureus enterotoxin B

    NASA Astrophysics Data System (ADS)

    Zhu, Shaoli; Du, ChunLei; Fu, Yongqi

    2009-09-01

    A triangular hybrid Au-Ag nanoparticles array was proposed for the purpose of biosensing in this paper. Constructing the hybrid nanoparticles, an Au thin film is capped on the Ag nanoparticles which are attached on glass substrate. The hybrid nanoparticles array was designed by means of finite-difference and time-domain (FDTD) algorithm-based computational numerical calculation and optimization. Sensitivity of refractive index of the hybrid nanoparticles array was obtained by the computational calculation and experimental detection. Moreover, the hybrid nanoparticles array can prevent oxidation of the pure Ag nanoparticles from atmosphere environment because the Au protective layer was deposited on top of the Ag nanoparticles so as to isolate the Ag particles from the atmosphere. We presented a novel surface covalent link method between the localized surface plasmon resonance (LSPR) effect-based biosensors with hybrid nanoparticles array and the detected target molecules. The generated surface plasmon wave from the array carries the biological interaction message into the corresponding spectra. Staphylococcus aureus enterotoxin B (SEB), a small protein toxin was directly detected at nanogramme per milliliter level using the triangular hybrid Au-Ag nanoparticles. Hence one more option for the SEB detection is provided by this way.

  17. Simple one-pot synthesis of solid-core@porous-shell alloyed PtAg nanocrystals for the superior catalytic activity toward hydrogen evolution and glycerol oxidation.

    PubMed

    Weng, Xuexiang; Liu, Qing; Wang, Ai-Jun; Yuan, Junhua; Feng, Jiu-Ju

    2017-05-15

    In this work, solid-core@porous-shell alloyed PtAg nanocrystals (PtAg NCs) were fabricated via a simple one-pot co-reduction wet-chemical method on a large scale. Diprophylline (DPP) was employed as the stabilizing agent and shape-directing agent, without any surfactant, polymer, seed or template. The products were mainly analyzed by a series of characterization technique. The hierarchical architectures had enhanced stability and improved electrocatalytic activity for hydrogen evolution reaction (HER) and glycerol oxidation reaction (GOR) in contrast with commercial available Pt/C and Pt black catalysts. For the prepared PtAg NCs catalyst, the Tafel slope is 40mVdec(-1) toward HER in 0.5M H2SO4, coupled with the specific activity and mass activity of 77.91mAcm(-2) and 1303mAmg(-1)Pt toward GOR, respectively.

  18. Sintered Cr/Pt and Ni/Au ohmic contacts to B{sub 12}P{sub 2}

    SciTech Connect

    Frye, Clint D.; Kucheyev, Sergei O.; Voss, Lars F.; Conway, Adam M.; Shao, Qinghui; Nikolić, Rebecca J.; Edgar, James H.

    2015-05-15

    Icosahedral boron phosphide (B{sub 12}P{sub 2}) is a wide-bandgap semiconductor possessing interesting properties such as high hardness, chemical inertness, and the reported ability to self-heal from irradiation by high energy electrons. Here, the authors developed Cr/Pt and Ni/Au ohmic contacts to epitaxially grown B{sub 12}P{sub 2} for materials characterization and electronic device development. Cr/Pt contacts became ohmic after annealing at 700 °C for 30 s with a specific contact resistance of 2 × 10{sup −4} Ω cm{sup 2}, as measured by the linear transfer length method. Ni/Au contacts were ohmic prior to any annealing, and their minimum specific contact resistance was ∼l–4 × 10{sup −4} Ω cm{sup 2} after annealing over the temperature range of 500–800 °C. Rutherford backscattering spectrometry revealed a strong reaction and intermixing between Cr/Pt and B{sub 12}P{sub 2} at 700 °C and a reaction layer between Ni and B{sub 12}P{sub 2} thinner than ∼25 nm at 500 °C.

  19. Synthesis of Pt and Au nanoparticles with a sacrificial stearonitrile shell.

    SciTech Connect

    Howell, Stephen Wayne; Dirk, Shawn M.; Moorhouse, Rebecca A.; Wheeler, David Roger

    2003-09-01

    Nanoparticles have received much attention and have been the subject of many reviews. Nanoparticles have also been used to form super molecular structures for molecular electronic, and sensor applications. However, many limitations exist when using nanoparticles, including the ability to manipulate the particles post synthesis. Current methods to prepare nanoparticles employ functionalities like thiols, amines, phosphines, isocyanides, or a citrate as the metal capping agent. While these capping agents prevent agglomeration or precipitation of the particles, most are difficult to displace or impede packing in nanoparticle films due to coulombic repulsion. It is in this vein that we undertook the synthesis of nanoparticles that have a weakly bound capping agent that is strong enough to prevent agglomeration and in the case of the platinum particles allow for purification, but yet, easily displaced by other strongly binding ligands. The nanoparticles where synthesized according to the Brust method except stearonitrile was used instead of an aliphatic thiol. Both platinum and gold were examined in this manner. A representative procedure for the synthesis of platinum nanoparticles involved the phase transfer of chloroplatinic acid (0.37 g, 0.90 mmol) dissolved in water (30 mL) to a solution of tetraoctylammonium bromide (2.2 g, 4.0 mmol) in toluene (80 mL). After the chloroplatinic acid was transferred into the organic phase the aqueous phase was removed. Stearonitrile (0.23 g, 0.87 mmol) was added and sodium borohydride (0.38 g, 49 mmol) in water (25 mL) was added. The solution turned black almost immediately and after 15 min the organic phase was separated and passed through a 0.45 {micro}m Teflon filter. The resulting solution was concentrated and twice precipitated into ethanol ({approx}200 mL) to yield 0.11 g of black platinum nanoparticles. TGA experiments showed that the Pt particles contained 35% by mass stearonitrile. TEM images showed an average particle size

  20. Synthesis of MoS2/Graphene hybrid supported Au and Ag nanoparticles with multi-functional catalytic properties.

    PubMed

    Chen, Ying; Peng, Wenchao; Li, Xiaoyan

    2017-03-30

    The detection and removal of nitroaromatic compounds are important issues for environment protection. In this study, the hybrid of molybdenum disulfide (MoS2) and graphene (GR) was first synthesized using a facile hydrothermal method. Au and Ag nanoparticles were then deposited on the surface of MoS2/GR hybrid with sodium citrate as stabilizer and reductant. Compared to using pure MoS2 as the support, the obtained Au (Ag)-MoS2/GR composites showed improved activity for electrochemical detection and chemical reduction of 4-nitrophenol. The activity enhancement should be due to the addition of GR, which could improve the conductivity as well as provide more active sites. The successful synthesis of Au (Ag)-MoS2/GR composites could provide new multi-function catalysts for environment protection.

  1. Molecular dynamics simulation of joining process of Ag-Au nanowires and mechanical properties of the hybrid nanojoint

    SciTech Connect

    Ding, Su; Tian, Yanhong Jiang, Zhi; He, Xiaobin

    2015-05-15

    The nanojoining process of Ag-Au hybrid nanowires at 800K was comprehensively studied by virtue of molecular dynamics (MD) simulation. Three kinds of configurations including end-to-end, T-like and X-like were built in the simulation aiming to understand the nanojoining mechanism. The detailed dynamic evolution of atoms, crystal structure transformation and defects development during the nanojoining processes were performed. The results indicate that there are two stages in the nanojoining process of Ag-Au nanowires which are atom diffusion and new bonds formation. Temperature is a key parameter affecting both stages ascribed to the energy supply and the optimum temperature for Ag-Au nanojoint with diameter of 4.08 nm has been discussed. The mechanical properties of the nanojoint were examined with simulation of tensile test on the end-to-end joint. It was revealed that the nanojoint was strong enough to resist fracture at the joining area.

  2. Hexagonal core-shell and alloy Au/Ag nanodisks on ZnO nanorods and their optical enhancement effect

    NASA Astrophysics Data System (ADS)

    Zhang, Junming; Lai, Boya; Chen, Zuxin; Chu, Sheng; Chu, Guang; Peng, Rufang

    2014-05-01

    Au and Ag hybrid hexagonal nanodisks were synthesized on ZnO nanorods' (0002) surface via a new two-step deposition-annealing method. The structural, compositional, as well as optical investigations were carried out systematically to find out the nanodisks' formation mechanism and optical enhancement effect. It was shown that the core-shell Au/Ag nanodisk can be formed under rapid annealing temperature of 500°C, while Au/Ag alloy nanodisks are formed if higher temperatures (>550°C) are applied. The optical effect from these nanodisks was studied through photoluminescence and absorption spectroscopy. It was found that the carrier-plasmon coupling together and carrier transfer between metal and ZnO contribute to the emission enhancement. Furthermore, the results suggest that the composition of nanodisk on the vicinity of metal/ZnO interface plays an important role in terms of the enhancement factors.

  3. Nanowire networks and hollow nanospheres of Ag-Au bimetallic alloys at room temperature.

    PubMed

    Hurtado, R Britto; Cortez-Valadez, M; Arizpe-Chávez, H; Flores-Lopez, N S; Álvarez, Ramón A B; Flores-Acosta, M

    2017-03-17

    Due to their physicochemical properties, metallic nanoalloys have potential applications in biomedicine, electrocatalysis and electrochemical sensors, among many other fields. New alternative procedures have emerged in order to reduce production costs and the use of toxic substances. In this study we present a novel low-toxicity synthesis method for the fabrication of nanowire networks (NWNs) and Ag-Au hollow nanospheres. The synthesis process is performed at room temperature without any sophisticated equipment, such as special cameras or furnaces, etc. Transmission electron microscopy showed that the NWNs contain random alloys with a diameter of between 10-13 nm. The radius for the hollow nanospheres is approximately located between 70-130 nm. The absorption bands in the UV-vis spectrum associated with the surface plasmon in Ag-Au bimetallic nanoparticles are highlighted at 385 nm for the NWNs and 643 nm for the hollow nanospheres. The study was performed with low-toxicity substances, such as rongalite, ascorbic acid and sucrose, and showed high efficiency for the fabrication of these types of nanostructures, as well as good stability for long periods of time.

  4. Electrodeposition of Au/Ag bimetallic dendrites assisted by Faradaic AC-electroosmosis flow

    NASA Astrophysics Data System (ADS)

    Ji, Jianlong; Li, Pengwei; Sang, Shengbo; Zhang, Wendong; Zhou, Zhaoying; Yang, Xing; Dong, Hualai; Li, Gang; Hu, Jie

    2014-03-01

    Au/Ag bimetallic dendrites were synthesized successfully from the corresponding aqueous solution via the AC electrodeposition method. Both of the morphologies and compositions could be tuned by the electrolyte concentration and AC frequency. The prepared bimetallic dendrites were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and UV-vis spectroscopy. The underlying dendrite growth mechanism was then proposed in the context of the Directed Electrochemical Nanowires Assembly (DENA) models. Owing to the unscreened voltage dropping in the electrolyte bulk, electromigration dominates the species flux process, and cations tend to accumulate in areas with strong electric field intensity, such as electrode edges. Moreover, Faradaic AC-electro-osmosis (ACEO) flow could increase the effective diffusion layer thickness in these areas during the electrochemical reaction, and leads to dendrite growth. Further Micro-Raman observations illustrated that the Au/Ag bimetallic dendrites exhibited pronounced surface-enhanced Raman scattering (SERS) activity, using 4-mercaptopyridine (4-MP) as model molecules.

  5. Hybrid microfluidic fuel cell based on Laccase/C and AuAg/C electrodes.

    PubMed

    López-González, B; Dector, A; Cuevas-Muñiz, F M; Arjona, N; Cruz-Madrid, C; Arana-Cuenca, A; Guerra-Balcázar, M; Arriaga, L G; Ledesma-García, J

    2014-12-15

    A hybrid glucose microfluidic fuel cell composed of an enzymatic cathode (Laccase/ABTS/C) and an inorganic anode (AuAg/C) was developed and tested. The enzymatic cathode was prepared by adsorption of 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and Laccase on Vulcan XC-72, which act as a redox mediator, enzymatic catalyst and support, respectively. The Laccase/ABTS/C composite was characterised by Fourier Transform Infrared (FTIR) Spectroscopy, streaming current measurements (Zeta potential) and cyclic voltammetry. The AuAg/C anode catalyst was characterised by Transmission electron microscopy (TEM) and cyclic voltammetry. The hybrid microfluidic fuel cell exhibited excellent performance with a maximum power density value (i.e., 0.45 mW cm(-2)) that is the highest reported to date. The cell also exhibited acceptable stability over the course of several days. In addition, a Mexican endemic Laccase was used as the biocathode electrode and evaluated in the hybrid microfluidic fuel cell generating 0.5 mW cm(-2) of maximum power density.

  6. A microscopic study of strongly plasmonic Au and Ag island thin films

    NASA Astrophysics Data System (ADS)

    Pavaskar, Prathamesh; Hsu, I.-Kai; Theiss, Jesse; Hsuan Hung, Wei; Cronin, Stephen B.

    2013-01-01

    Thin Au and Ag evaporated films (˜5 nm) are known to form island-like growth, which exhibit a strong plasmonic response under visible illumination. In this work, evaporated thin films are imaged with high resolution transmission electron microscopy, to reveal the structure of the semicontinuous metal island film with sub-nm resolution. The electric field distributions and the absorption spectra of these semicontinuous island film geometries are then simulated numerically using the finite difference time domain method and compared with the experimentally measured absorption spectra. We find surface enhanced Raman scattering (SERS) enhancement factors as high as 108 in the regions of small gaps (≤2 nm), which dominate the electromagnetic response of these films. The small gap enhancement is further substantiated by a statistical analysis of the electric field intensity as a function of the nanogap size. Areal SERS enhancement factors of 4.2 × 104 are obtained for these films. These plasmonic films can also enhance the performance of photocatalytic and photovoltaic phenomena, through near-field coupling. For TiO2 photocatalysis, we calculate enhancement factors of 16 and 19 for Au and Ag, respectively. We study the effect of annealing on these films, which results in a large reduction in electric field strength due to increased nanoparticle spacing.

  7. Synthesis, fractionation, and optical characterization of Au-Ag composite nanorods

    NASA Astrophysics Data System (ADS)

    Alekseeva, Anna V.; Bogatyrev, Vladimir A.; Trachuk, Lyubov A.; Khlebtsov, Nikolai G.

    2005-06-01

    We report on a synthesis procedure and optical properties of composite Au-Ag spherical and rod-like nanoparticles. The synthesis protocol is based on a seed-mediated growth in the presence of soft templates in micellar aqueous solution of ionic surfactant (CTAB). Variation of Au/Ag molar ratio allows one to produce nanorods (NRs) with different aspect ratio. The disadvantage of the method is formation of appreciable amount of spherical nanoparticles. To separate rod-like particles from spheres and surfactant, we used a fractionation procedure that involves centrifugatiori of samples in the density gradient of glycerol. The separated NRs were suspended in water or 25% glycerol solutions and their extinction and differential light scattering (at 900) spectra were recorded for 450-850 ni-n wavelengths. Theoretical spectra were calculated by T-matrix method as applied to randomly oriented gold cylinders with semispherical ends. The simulated spectra for water and glycerol suspensions can be brought in close agreement with experimental observations if the aspect ratio is used as a fitting parameter. We discuss also the absorption and light scattering contribution to the total extinction spectra and deviation of the exact solution from the classical electrostatic approximation by Gans.

  8. Electrodeposition of Au/Ag bimetallic dendrites assisted by Faradaic AC-electroosmosis flow

    SciTech Connect

    Ji, Jianlong; Li, Pengwei; Sang, Shengbo Zhang, Wendong Li, Gang; Hu, Jie; Zhou, Zhaoying Yang, Xing; Dong, Hualai

    2014-03-15

    Au/Ag bimetallic dendrites were synthesized successfully from the corresponding aqueous solution via the AC electrodeposition method. Both of the morphologies and compositions could be tuned by the electrolyte concentration and AC frequency. The prepared bimetallic dendrites were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and UV–vis spectroscopy. The underlying dendrite growth mechanism was then proposed in the context of the Directed Electrochemical Nanowires Assembly (DENA) models. Owing to the unscreened voltage dropping in the electrolyte bulk, electromigration dominates the species flux process, and cations tend to accumulate in areas with strong electric field intensity, such as electrode edges. Moreover, Faradaic AC-electro-osmosis (ACEO) flow could increase the effective diffusion layer thickness in these areas during the electrochemical reaction, and leads to dendrite growth. Further Micro-Raman observations illustrated that the Au/Ag bimetallic dendrites exhibited pronounced surface-enhanced Raman scattering (SERS) activity, using 4-mercaptopyridine (4-MP) as model molecules.

  9. Theophylline-assisted, eco-friendly synthesis of PtAu nanospheres at reduced graphene oxide with enhanced catalytic activity towards Cr(VI) reduction.

    PubMed

    Hu, Ling-Ya; Chen, Li-Xian; Liu, Meng-Ting; Wang, Ai-Jun; Wu, Lan-Ju; Feng, Jiu-Ju

    2017-05-01

    Theophylline as a naturally alkaloid is commonly employed to treat asthma and chronic obstructive pulmonary disorder. Herein, a facile theophylline-assisted green approach was firstly developed for synthesis of PtAu nanospheres/reduced graphene oxide (PtAu NSs/rGO), without any surfactant, polymer, or seed involved. The obtained nanocomposites were applied for the catalytic reduction and removal of highly toxic chromium (VI) using formic acid as a model reductant at 50°C, showing the significantly enhanced catalytic activity and improved recyclability when compared with commercial Pt/C (50%) and home-made Au nanocrystals supported rGO (Au NCs/rGO). It demonstrates great potential applications of the catalyst in wastewater treatment and environmental protection. The eco-friendly route provides a new platform to fabricate other catalysts with enhanced catalytic activity.

  10. In Vivo Neural Recording and Electrochemical Performance of Microelectrode Arrays Modified by Rough-Surfaced AuPt Alloy Nanoparticles with Nanoporosity

    PubMed Central

    Zhao, Zongya; Gong, Ruxue; Zheng, Liang; Wang, Jue

    2016-01-01

    In order to reduce the impedance and improve in vivo neural recording performance of our developed Michigan type silicon electrodes, rough-surfaced AuPt alloy nanoparticles with nanoporosity were deposited on gold microelectrode sites through electro-co-deposition of Au-Pt-Cu alloy nanoparticles, followed by chemical dealloying Cu. The AuPt alloy nanoparticles modified gold microelectrode sites were characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and in vivo neural recording experiment. The SEM images showed that the prepared AuPt alloy nanoparticles exhibited cauliflower-like shapes and possessed very rough surfaces with many different sizes of pores. Average impedance of rough-surfaced AuPt alloy nanoparticles modified sites was 0.23 MΩ at 1 kHz, which was only 4.7% of that of bare gold microelectrode sites (4.9 MΩ), and corresponding in vitro background noise in the range of 1 Hz to 7500 Hz decreased to 7.5 μVrms from 34.1 μVrms at bare gold microelectrode sites. Spontaneous spike signal recording was used to evaluate in vivo neural recording performance of modified microelectrode sites, and results showed that rough-surfaced AuPt alloy nanoparticles modified microelectrode sites exhibited higher average spike signal-to-noise ratio (SNR) of 4.8 in lateral globus pallidus (GPe) due to lower background noise compared to control microelectrodes. Electro-co-deposition of Au-Pt-Cu alloy nanoparticles combined with chemical dealloying Cu was a convenient way for increasing the effective surface area of microelectrode sites, which could reduce electrode impedance and improve the quality of in vivo spike signal recording. PMID:27827893

  11. Differences in intermediate structures and electronic states associated with oxygen adsorption onto Pt, Cu, and Au clusters as oxygen reduction catalysts

    NASA Astrophysics Data System (ADS)

    Morishita, Tetsunori; Ueno, Tomonaga; Panomsuwan, Gasidit; Hieda, Junko; Bratescu, Maria Antoaneta; Saito, Nagahiro

    2016-10-01

    We used ab initio molecular orbital (MO) calculations to study the differences in the intermediate structures and the electronic states involved in the adsorption of O2 onto 13-atom metal clusters of Pt, Cu, and Au. Additionally, the conditions required for the electrocatalytic oxygen reduction reaction (ORR) on the Pt, Cu, and Au clusters were investigated and discussed. The intermediates involved in O2 adsorption onto Pt, Cu, and Au were found to be (Pt-O)-(Pt-O), Cu-O, and Au-O2, respectively. The differences in the O2 adsorption intermediates is explained on the basis of our analysis of the projected density of state (PDOS) area of the new MOs produced from a mixture of the 2pπ * orbitals of O2 and the d orbitals of the metal clusters. The formation of the (Pt-O)-(Pt-O) intermediate after the adsorption of O2 onto the Pt cluster is attributed to the emergence of an antibonding orbital above the Fermi level. Thus, this electronic state can lead to the decomposition and desorption of O2 molecules, thereby promoting the high-activity level of ORR. For the Cu cluster, a new antibonding orbital was observed below the Fermi level. Moreover, the Cu cluster surface can only promote O2 decomposition and not O2 desorption due to the formation of copper oxides. For the Au cluster, no new MOs related to 2pπ * orbitals of O2 appeared because O2 was molecularly adsorbed, implying that the Au cluster is an inefficient ORR catalyst.

  12. A grazing incidence surface X-ray absorption fine structure (GIXAFS) study of alkanethiols adsorbed on Au, Ag, and Cu

    NASA Astrophysics Data System (ADS)

    Floriano, Pierre N.; Schlieben, Olaf; Doomes, Edward E.; Klein, Ingo; Janssen, J.; Hormes, Josef; Poliakoff, E. D.; McCarley, Robin L.

    2000-04-01

    Self-assembled monolayers of n-alkanethiols, CH 3-(CH 2) x-SH, on Au, Ag, and Cu have been studied with GIXAFS at the sulfur K-edge. For both pentanethiol and decanethiol monolayers on Ag and Cu, the three-fold hollow site is found to be the most probable sulfur binding site. However, observations for octadecanethiol indicate that the three-fold hollow site is not the exclusive binding site. In addition, the possible existence of disulfide bonds on the metal surface (adsorbed dialkyldisulfides) is not supported by the data. Preliminary results from monolayers on Au are also reported.

  13. One-Pot Fabrication of Mesoporous Core-Shell Au@PtNi Ternary Metallic Nanoparticles and Their Enhanced Efficiency for Oxygen Reduction Reaction.

    PubMed

    Shi, Qiurong; Zhu, Chengzhou; Fu, Shaofang; Du, Dan; Lin, Yuehe

    2016-02-01

    Currently, Pt-based nanomaterials with tailorable shapes, structures, and morphologies are the most popular electrocatalysts for oxygen reduction reaction, which is a significant cathode reaction in fuel cells for renewable energy applications. We have successfully synthesized mesoporous core-shell Au@PtNi ternary metallic nanoparticles through a one-pot reduction method for cathodic materials used as oxygen reduction reaction catalysts. The as-synthesized nanoparticles exhibited superior catalytic activities and long-term stabilities compared with mesoporous core-shell Au@Pt nanoparticles and commercial Pt/C. The unique mesoporous core-shell structures as well as the alloy shells enable the enhanced electrochemical oxygen reduction reaction performances of the Pt-based materials via the electronic effect and geometric effect, holding great promise in fuel cell application.

  14. Au@Ag nanorods based electrochemical immunoassay for immunoglobulin G with signal enhancement using carbon nanofibers-polyamidoamine dendrimer nanocomposite.

    PubMed

    Ma, Lina; Ning, Danlei; Zhang, Hongfang; Zheng, Jianbin

    2015-06-15

    Au@Ag nanorods (Au@AgNRs) was utilized to construct a novel sandwich-type electrochemical immunosensor for the detection of immunoglobulin G (IgG). The sensor was prepared by immoblizing capture antibodies on the amine-terminated nanocomposite of carbon nanofibers-polyamidoamine dendrimer (CNFs-PAMAM), whilst the trace tag was prepared by loading anti-human IgG on Au@AgNRs. The "built-in" Ag layer on Au nanorods was characterized by UV-vis extinction spectra, transmission electron microscopy and energy dispersive spectroscopy. The results of cyclic voltammetry indicated that modifying CNFs-PAMAM nanocomposite on glassy carbon electrode enabled 177 times of peak current increase of Ag in the bimetallic nanorods. The peak current was quantitatively related with the concentration of the target protein IgG via the formation of immunocomplex. After the parameter optimization, the oxidative peak current of silver was proportional to the concentration of IgG in a wide linear range of six orders of magnitude with a low detection limit of 0.5 fg mL(-1). Besides, this sensor showed acceptable reproducibility and stability, and thus the strategy reported here has great promise for extension to the other disease biomarkers.

  15. Thermal Expansion Behavior of M(I)[AuX2(CN)2]-Based Coordination Polymers (M = Ag, Cu; X = CN, Cl, Br).

    PubMed

    Ovens, Jeffrey S; Leznoff, Daniel B

    2017-04-04

    Two sets of trans-[AuX2(CN)2](-)-based coordination polymer materials-M[AuX2(CN)2] (M = Ag; X = Cl, Br or M = Cu; X = Br) and M[Au(CN)4] (M = Ag, Cu)-were synthesized and structurally characterized and their dielectric constants and thermal expansion behavior explored. The M[AuX2(CN)2] series crystallized in a tightly packed, mineral-like structure featuring 1-D trans-[AuX2(CN)2](-)-bridged chains interconnected via a series of intermolecular Au···X and M···X (M = Ag, Cu) interactions. The M[Au(CN)4] series adopted a 2-fold interpenetrated 3-D cyano-bound framework lacking any weak intermolecular interactions. Despite the tight packing and the presence of intermolecular interactions, these materials exhibited decreased thermal stability over unbound trans-[AuX2(CN)2](-) in [(n)Bu4N][AuX2(CN)2]. A significant dielectric constant of up to εr = 36 for Ag[AuCl2(CN)2] (1 kHz) and a lower εr = 9.6 (1 kHz) for Ag[Au(CN)4] were measured and interpreted in terms of their structures and composition. A systematic analysis of the thermal expansion properties of the M[AuX2(CN)2] series revealed a negative thermal expansion (NTE) component along the cyano-bridged chains with a thermal expansion coefficient (αCN) of -13.7(11), -14.3(5), and -11.36(18) ppm·K(-1) for Ag[AuCl2(CN)2], Ag[AuBr2(CN)2], and Cu[AuBr2(CN)2], respectively. The Au···X and Ag···X interactions affect the thermal expansion similarly to metallophilic Au···Au interactions in M[Au(CN)2] and AuCN; replacing X = Cl with the larger Br atoms has a less significant effect. A similar analysis for the M[Au(CN)4] series (where the volume thermal expansion coefficient, αV, is 41(3) and 68.7(19) ppm·K(-1) for M = Ag, Cu, respectively) underscored the significance of the effect of the atomic radius on the flexibility of the framework and, thus, the thermal expansion properties.

  16. Site preference of ternary alloying additions to NiTi: Fe, Pt, Pd, Au, Al, Cu, Zr and Hf

    NASA Technical Reports Server (NTRS)

    Bozzolo, Guillermo; Noebe, Ronald D.; Mosca, Hugo O.

    2004-01-01

    Atomistic modeling of the site substitution behavior of Pd in NiTi (J. Alloys and Comp. (2004), in press) has been extended to examine the behavior of several other alloying additions, namely, Fe, Pt, Au, Al, Cu, Zr and Hf in this important shape memory alloy. It was found that all elements, to a varying degree, displayed absolute preference for available sites in the deficient sublattice. How- ever, the energetics of the different substitutional schemes, coupled with large scale simulations indicate that the general trend in all cases is for the ternary addition to want to form stronger ordered structures with Ti.

  17. A nanocomposite of Au-AgI core/shell dimer as a dual-modality contrast agent for x-ray computed tomography and photoacoustic imaging

    PubMed Central

    Orza, Anamaria; Yang, Yi; Feng, Ting; Wang, Xueding; Wu, Hui; Li, Yuancheng; Yang, Lily; Tang, Xiangyang; Mao, Hui

    2016-01-01

    Purpose: To develop a core/shell nanodimer of gold (core) and silver iodine (shell) as a dual-modal contrast-enhancing agent for biomarker targeted x-ray computed tomography (CT) and photoacoustic imaging (PAI) applications. Methods: The gold and silver iodine core/shell nanodimer (Au/AgICSD) was prepared by fusing together components of gold, silver, and iodine. The physicochemical properties of Au/AgICSD were then characterized using different optical and imaging techniques (e.g., HR- transmission electron microscope, scanning transmission electron microscope, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, Z-potential, and UV-vis). The CT and PAI contrast-enhancing effects were tested and then compared with a clinically used CT contrast agent and Au nanoparticles. To confer biocompatibility and the capability for efficient biomarker targeting, the surface of the Au/AgICSD nanodimer was modified with the amphiphilic diblock polymer and then functionalized with transferrin for targeting transferrin receptor that is overexpressed in various cancer cells. Cytotoxicity of the prepared Au/AgICSD nanodimer was also tested with both normal and cancer cell lines. Results: The characterizations of prepared Au/AgI core/shell nanostructure confirmed the formation of Au/AgICSD nanodimers. Au/AgICSD nanodimer is stable in physiological conditions for in vivo applications. Au/AgICSD nanodimer exhibited higher contrast enhancement in both CT and PAI for dual-modality imaging. Moreover, transferrin functionalized Au/AgICSD nanodimer showed specific binding to the tumor cells that have a high level of expression of the transferrin receptor. Conclusions: The developed Au/AgICSD nanodimer can be used as a potential biomarker targeted dual-modal contrast agent for both or combined CT and PAI molecular imaging. PMID:26745951

  18. A nanocomposite of Au-AgI core/shell dimer as a dual-modality contrast agent for x-ray computed tomography and photoacoustic imaging

    SciTech Connect

    Orza, Anamaria; Wu, Hui; Li, Yuancheng; Mao, Hui E-mail: Xiangyang.Tang@emory.edu; Yang, Yi; Tang, Xiangyang E-mail: Xiangyang.Tang@emory.edu; Feng, Ting; Wang, Xueding; Yang, Lily

    2016-01-15

    Purpose: To develop a core/shell nanodimer of gold (core) and silver iodine (shell) as a dual-modal contrast-enhancing agent for biomarker targeted x-ray computed tomography (CT) and photoacoustic imaging (PAI) applications. Methods: The gold and silver iodine core/shell nanodimer (Au/AgICSD) was prepared by fusing together components of gold, silver, and iodine. The physicochemical properties of Au/AgICSD were then characterized using different optical and imaging techniques (e.g., HR- transmission electron microscope, scanning transmission electron microscope, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, Z-potential, and UV-vis). The CT and PAI contrast-enhancing effects were tested and then compared with a clinically used CT contrast agent and Au nanoparticles. To confer biocompatibility and the capability for efficient biomarker targeting, the surface of the Au/AgICSD nanodimer was modified with the amphiphilic diblock polymer and then functionalized with transferrin for targeting transferrin receptor that is overexpressed in various cancer cells. Cytotoxicity of the prepared Au/AgICSD nanodimer was also tested with both normal and cancer cell lines. Results: The characterizations of prepared Au/AgI core/shell nanostructure confirmed the formation of Au/AgICSD nanodimers. Au/AgICSD nanodimer is stable in physiological conditions for in vivo applications. Au/AgICSD nanodimer exhibited higher contrast enhancement in both CT and PAI for dual-modality imaging. Moreover, transferrin functionalized Au/AgICSD nanodimer showed specific binding to the tumor cells that have a high level of expression of the transferrin receptor. Conclusions: The developed Au/AgICSD nanodimer can be used as a potential biomarker targeted dual-modal contrast agent for both or combined CT and PAI molecular imaging.

  19. An ultrasensitive, uniform and large-area surface-enhanced Raman scattering substrate based on Ag or Ag/Au nanoparticles decorated Si nanocone arrays

    NASA Astrophysics Data System (ADS)

    Zhang, P. P.; Gao, J.; Sun, X. H.

    2015-01-01

    Large-area and highly ordered Si nanocone arrays decorated with Ag or Au/Ag nanoparticles have been fabricated via a mask-free lithography with reaction ion etching, followed by metal deposition process. Ultrasensitive surface enhanced Raman scattering signals with an enhancement factor of 1012 were achieved even at the concentration of the Rhodamine 6G as low as 10-15 M. The surface-enhanced Raman spectroscopy (SERS) substrate was also applied on the detection of Sudan I dye and the Raman signals were substantially enhanced as well. The stability of the SERS substrate can be significantly improved by covering Ag nanoparticles with Au thin layer, which maintain a high SERS performance even after one month storage. This nanofabrication process appears to be a feasible approach to prepare uniform and reproducible SERS-active substrates with high sensitivity and stability for practical SERS applications.

  20. Fabrication of Au@Ag core/shell nanoparticles decorated TiO2 hollow structure for efficient light-harvesting in dye-sensitized solar cells.

    PubMed

    Yun, Juyoung; Hwang, Sun Hye; Jang, Jyongsik

    2015-01-28

    Improving the light-harvesting properties of photoanodes is promising way to enhance the power conversion efficiency (PCE) of dye-sensitized solar cells (DSSCs). We synthesized Au@Ag core/shell nanoparticles decorated TiO2 hollow nanoparticles (Au@Ag/TiO2 HNPs) via sol-gel reaction and chemical deposition. The Au@Ag/TiO2 HNPs exhibited multifunctions from Au@Ag core/shell NPs (Au@Ag CSNPs) and TiO2 hollow nanoparticles (TiO2 HNPs). These Au@Ag CSNPs exhibited strong and broadened localized surface plasmon resonance (LSPR), together with a large specific surface area of 129 m(2) g(-1), light scattering effect, and facile oxidation-reduction reaction of electrolyte from TiO2 HNPs, which resulted in enhancement of the light harvesting. The optimum PCE of η = 9.7% was achieved for the DSSCs using photoanode materials based on TiO2 HNPs containing Au@Ag/TiO2 HNPs (0.2 wt % Au@Ag CSNPs with respect to TiO2 HNPs), which outperformed by 24% enhancement that of conventional photoanodes formed using P25 (η = 7.8%).

  1. Wetting reaction of Sn-Ag based solder systems on Cu substrates plated with Au and/or Pd layer

    NASA Astrophysics Data System (ADS)

    Liu, C. Y.; Li, Jian; Vandentop, G. J.; Choi, W. J.; Tu, K. N.

    2001-05-01

    The wetting behavior of SnAg based Pb-free solders on Cu and Cu substrates plated with Au, Pd, and Au/Pd thin films have been studied. The wetting angle and kinetics of interfacial reaction were measured. The Au-plated substrates exhibit better wetting than the Pd-plated substrates. In the case of SnAg on Pd-plated Cu, SEM observation revealed that the solder cap was surrounded by an innerring of Cu-Sn compound and an outer ring of Pd-Sn compound. This implies that the molten SnAg solder had removed the Pd and wetted the Cu directly in the equilibrium state. The effects of pre-doping Cu in the SnAg solder on wetting behavior were also investigated. We found that wettability decreases with increasing Cu content in the solder. We also observed that the SnAgCu solders have a lower Cu consumption rate than the SnAg solder.

  2. Reflow soldering and isothermal solid-state aging of Sn-Ag eutectic solder on Au/Ni surface finish

    NASA Astrophysics Data System (ADS)

    Liu, C. M.; Ho, C. E.; Chen, W. T.; Kao, C. R.

    2001-09-01

    The reaction between the eutectic Sn-3.5Ag solder and the Au/Ni surface finish during reflow as well as during isothermal aging was studied. The Au layer was electroplated and had a thickness of the one μm. The peak reflow temperature was fixed at 250 C while the reflow time was varied between 10 sec and one h. Samples that went through 90 sec reflow time were then subjected to 160 C isothermal aging for up to 875 h. It was found that during reflow the Au layer reacted very quickly with the solder to form AuSn4. One μm of Au layer was consumed in less than 10 sec. As the aging time increased, AuSn4 grains began to separate themselves from the Ni layer at the roots of the grains and started to fall into the solder. When, the reflow time reached 30 sec, all the Au intermetallic head left the interface, and Ni3Sn4 started, to form at the interface. The Ni3Sn4 growth rate followed linear kinetics initially (<240 sec), but the growth rate slowed down afterward. During the isothermal aging, only a small amount of (AuxNi1-x)Sn4 resettled back to the interface, and a continuous (Au0.45Ni0.55)Sn4 layer did not form at the interface, unlike the case for the Sn-37Pb solder. This is an important advantage for Sn-3.5 Ag over Sn-37Pb because a continuous (Au0.45Ni0.55)Sn4 layer inevitably will weaken a solder joint. Our observation indicated that many (AuxNi1-x)Sn4 particles were trapped by the Ag3Sn particles, and were hindered from resettling back to the interface.

  3. Unusual Rh nanocrystal morphology control by hetero-epitaxially growing Rh on Au@Pt nanowires with numerous vertical twinning boundaries

    NASA Astrophysics Data System (ADS)

    An, Hyohyun; Khi, Nguyen Tien; Yoon, Jisun; Lee, Hyunkyung; Baik, Hionsuck; Sohn, Jeong-Hun; Lee, Kwangyeol

    2015-04-01

    Simultaneously growing multiple nanocrystallites in a crowded space can cause a shortage of precursors, and this can lead to a vertical growth of nanocrystallites on a given substrate. The presence of surfactant-surfactant interactions among adjacent nanocrystals can also place a unique structural constraint on the growing nanocrystallites, resulting in novel nanocrystal facet control. Herein, we report the growth of Rh on Au@Pt nanowires with multiple twinning boundaries, which are found along the entire nanowire length. The Au@Pt nanowires exhibit numerous bead-like structures, resulting from the preferred Pt deposition on the twinning boundaries, which can serve as nucleation sites for Rh. The heteroepitaxial growth of Rh on the Au@Pt nanowires results in unusual crystal growth behaviours. First, novel morphologies of Rh nanorods, nanoplates, and tangled manes are obtained temperature-dependently, which are not obtained in the absence of the Au@Pt nanowire substrate. Secondly, the thickness of vertically grown nanorods and nanoplates is tightly controlled. We also report the structure-catalytic activity relationship on the catalytic hydrogenation of phthalimides by the new Rh nanostructures.Simultaneously growing multiple nanocrystallites in a crowded space can cause a shortage of precursors, and this can lead to a vertical growth of nanocrystallites on a given substrate. The presence of surfactant-surfactant interactions among adjacent nanocrystals can also place a unique structural constraint on the growing nanocrystallites, resulting in novel nanocrystal facet control. Herein, we report the growth of Rh on Au@Pt nanowires with multiple twinning boundaries, which are found along the entire nanowire length. The Au@Pt nanowires exhibit numerous bead-like structures, resulting from the preferred Pt deposition on the twinning boundaries, which can serve as nucleation sites for Rh. The heteroepitaxial growth of Rh on the Au@Pt nanowires results in unusual crystal

  4. Au@Ag/Au nanoparticles assembled with activatable aptamer probes as smart "nano-doctors" for image-guided cancer thermotherapy.

    PubMed

    Shi, Hui; Ye, Xiaosheng; He, Xiaoxiao; Wang, Kemin; Cui, Wensi; He, Dinggeng; Li, Duo; Jia, Xuekun

    2014-08-07

    Although nanomaterial-based theranostics have increased positive expectations from cancer treatment, it remains challenging to develop in vivo "nano-doctors" that provide high-contrast image-guided site-specific therapy. Here we designed an activatable theranostic nanoprobe (ATNP) via self-assembly of activatable aptamer probes (AAPs) on Au@Ag/Au nanoparticles (NPs). As both quenchers and heaters, novel Au@Ag/Au NPs were prepared, showing excellent fluorescence quenching and more effective near-infrared photothermal therapy than Au nanorods. The AAP comprised a thiolated aptamer and a fluorophore-labeled complementary DNA; thus, the ATNP with quenched fluorescence in the free state could realize signal activation through target binding-induced conformational change of the AAP, and then achieve on-demand treatment under image-guided irradiation. By using S6 aptamer as the model, in vitro and in vivo studies of A549 lung cancer verified that the ATNP greatly improved imaging contrast and specific destruction, suggesting a robust and versatile theranostic strategy for personalized medicine in future.

  5. PdAgAu alloy with high resistance to corrosion by H2S

    SciTech Connect

    Braun, Fernando; Miller, James B.; Gellman, Andrew J.; Tarditi, Ana M.; Fleutot, Benoit; Kondratyuk, Petro; Cornaglia, Laura M.

    2012-12-01

    PdAgAu alloy films were prepared on porous stainless steel supports by sequential electroless deposition. Two specific compositions, Pd83Ag2Au15 and Pd74Ag14Au12, were studied for their sulfur tolerance. The alloys and a reference Pd foil were exposed to 1000 H2S /H2 at 623 K for periods of 3 and 30 hours. The microstructure, morphology and bulk composition of both nonexposed and H2S-exposed samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). XRD and SEM analysis revealed time-dependent growth of a bulk Pd{sub 4}S phase on the Pd foil during H2S exposure. In contrast, the PdAgAu ternary alloys displayed the same FCC structure before and after H2S exposure. In agreement with the XRD and SEM results, sulfur was not detected in the bulk of either ternary alloy samples by EDS, even after 30 hours of H2S exposure. X-ray photoelectron spectroscopy (XPS) depth profiles were acquired for both PdAgAu alloys after 3 and 30 hours of exposure to characterize sulfur contamination near their surfaces. Very low S 2p and S 2s XPS signals were observed at the top-surfaces of the PdAgAu alloys, and those signals disappeared before the etch depth reached ~ 10 nm, even for samples exposed to H2S for 30 hours. The depth profile analyses also revealed silver and gold segregation to the surface of the alloys; preferential location of Au on the alloys surface may be related to their resistance to bulk sulfide formation. In preliminary tests, a PdAgAu alloy membrane displayed higher initial H{sub 2} permeability than a similarly prepared pure Pd sample and, consistent with resistance to bulk sulfide formation, lower permeability loss in H2S than pure Pd.

  6. Au/PtO nanoparticle-modified g-C3N4 for plasmon-enhanced photocatalytic hydrogen evolution under visible light.

    PubMed

    Jiang, Jing; Yu, Jiaguo; Cao, Shaowen

    2016-01-01

    Photocatalytic hydrogen evolution under visible light is of great potential for renewable energy development. In this work, unalloyed Au/PtO nanoparticle (NP) co-modified graphitic carbon nitride (g-C3N4) photocatalyst is fabricated through a simple photodeposition method. The obtained g-C3N4 composites with co-existed Au and PtO cocatalysts exhibit a considerable enhancement in the photocatalytic hydrogen evolution activity and possess good stability during cycling experiments. The optimal Au-PtO/g-C3N4 photocatalyst shows a H2 production rate of 16.9 μmol h(-1), which exceeds that of PtO/g-C3N4 and Au/g-C3N4 by a factor of 1.5 and 10.6, respectively. Further characterizations demonstrate that the synergetic action of electron-sink and catalytic effects of PtO along with surface plasmon resonance (SPR) effect of Au NPs, greatly improves the photocatalytic performance of g-C3N4 under visible light. Our study should bring in new insight into the design of effective g-C3N4-based photocatalysts for solar-to-fuel conversion.

  7. Electrochemical immunosensor for detecting typical bladder cancer biomarker based on reduced graphene oxide-tetraethylene pentamine and trimetallic AuPdPt nanoparticles.

    PubMed

    Ma, Hongmin; Zhang, Xiaoyue; Li, Xiaojian; Li, Rongxia; Du, Bin; Wei, Qin

    2015-10-01

    A highly sensitive electrochemical immunosensor for detection of typical bladder cancer biomarker-nuclear matrix protein 22 (NMP22) was developed by using reduced graphene oxide-tetraethylene pentamine (rGO-TEPA) and trimetallic AuPdPt nanoparticles (NPs). rGO-TEPA was used as the ideal material for signal amplification and AuPdPt NPs immobilization due to its excellent conductivity and large surface area. An effective platform was constructed for antibodies anchoring by using AuPdPt NPs, which kept the antibodies' high stability and bioactivity. Moreover, AuPdPt NPs could accelerate the electron transfer and enhance the signal response, which assisted by the synergistic effect of the three different metals (Au, Pd and Pt). The proposed immunosensor showed satisfied performance such as simple fabrication, low detection limits (0.01 U/mL), wide linear range (from 0.040 to 20 U/mL), short analysis time (2 min), high stability and selectivity in the detection of NMP22. Furthermore, the proposed immunosensor was employed to test real urine samples with satisfactory results.

  8. Development of Ag-Pd-Au-Cu alloys for multiple dental applications. Part 2. Mechanical properties of experimental Ag-Pd-Au-Cu alloys containing Sn or Ga for ceramic-metal restorations.

    PubMed

    Goto, S; Nakai, A; Miyagawa, Y; Ogura, H

    2001-06-01

    Eighteen Ag-Pd-Au-Cu alloys, consisting of nine Ag-Pd-Au-Cu mother compositions (Pd: 20, 30 or 40%, Au: 20%, Cu: 10, 15 or 20%, Ag: balance) containing either 5% Sn or 5% Ga as an additive metal, were experimentally prepared. Tensile strength, proof stress, elongation, elastic modulus, and Vickers hardness of these alloys were evaluated to clarify the potential of these alloys for use as ceramic-metal restorations as well as the effects of the Pd and Cu contents on their mechanical properties. The tensile strength, proof stress, elongation, elastic modulus and Vickers hardness of the 18 experimental alloys were in the range of 410.0-984.0 MPa, 289.7-774.3 MPa, 2.2-23.7%, 81.3-123.0 GPa and 135.7-332.3 HV1, respectively. Ten of the 18 experimental alloys can be used for ultra-low fusing ceramics based on their proof stress, elastic modulus, elongation and hardness. Between the Ga- and Sn-added alloys, differences in tensile strength, proof stress, elongation and hardness were found at several Ag-Pd-Au-Cu compositions.

  9. Controlled preparation of Au/Ag/SnO2 core-shell nanoparticles using a photochemical method and applications in LSPR based sensing

    NASA Astrophysics Data System (ADS)

    Zhou, Na; Ye, Chen; Polavarapu, Lakshminarayana; Xu, Qing-Hua

    2015-05-01

    A photochemical method for the controlled preparation of core-shell Au/Ag/SnO2 nanorods (NRs) and nanospheres (NSs) has been developed based on photo-induced electron transfer processes in the plasmonic metal-semiconductor system. Au/AgNR/SnO2 and Au/AgNS/SnO2 were prepared by the UV irradiation of a mixture of mesoporous SnO2 coated AuNRs, or AuNSs, and AgNO3, in which AgNO3 was reduced by electrons transferred from the photo-excited mesoporous SnO2 (semiconductor) to the gold (metal). This method allows precise control over the composition and optical properties of the obtained nanoparticles. The LSPR refractive index sensitivity of the obtained Au/AgNR/SnO2 nanoparticles has been optimized to obtain a refractive index sensitivity of ~442 nm RIU-1. The optimized nanoparticles were subsequently chosen for the LSPR based sensing of glutathione (GSH) with the limit of detection of ~7.5 × 10-7 M. This photochemical method allows the controlled preparation of various Au/Ag/SnO2 nanoparticles to adjust their LSPR to suit various applications.A photochemical method for the controlled preparation of core-shell Au/Ag/SnO2 nanorods (NRs) and nanospheres (NSs) has been developed based on photo-induced electron transfer processes in the plasmonic metal-semiconductor system. Au/AgNR/SnO2 and Au/AgNS/SnO2 were prepared by the UV irradiation of a mixture of mesoporous SnO2 coated AuNRs, or AuNSs, and AgNO3, in which AgNO3 was reduced by electrons transferred from the photo-excited mesoporous SnO2 (semiconductor) to the gold (metal). This method allows precise control over the composition and optical properties of the obtained nanoparticles. The LSPR refractive index sensitivity of the obtained Au/AgNR/SnO2 nanoparticles has been optimized to obtain a refractive index sensitivity of ~442 nm RIU-1. The optimized nanoparticles were subsequently chosen for the LSPR based sensing of glutathione (GSH) with the limit of detection of ~7.5 × 10-7 M. This photochemical method allows

  10. Ultra-small Tetrametallic Pt-Pd-Rh-Ag Nanoframes with Tunable Behavior for Direct Formic Acid/Methanol Oxidation.

    PubMed

    Saleem, Faisal; Ni, Bing; Yong, Yang; Gu, Lin; Wang, Xun

    2016-10-01

    Reversible tuning of ultra-small multimetallic Pt-Pd-Rh-Ag nanoframes is achieved. These nanoframes showed tunable and reversible modes for the oxidation of small organic molecules by simply inducing segregation with adsorbates, such as SO4(2-) and OH(-) . This is the first example of reversible segregation under electrocatalytic conditions in atomic-sized electrocatalysts. These nanoframes also showed a controllable activity and good stability for the oxidation of small organic molecules.

  11. Electrochemical promotion of propane oxidation on Pt deposited on a dense β"-Al2O3 ceramic Ag+ conductor

    NASA Astrophysics Data System (ADS)

    Tsampas, Michail; Kambolis, Anastasios; Obeid, Emil; Lizarraga, Leonardo; Sapountzi, Foteini; Vernoux, Philippe

    2013-08-01

    A new kind of electrochemical catalyst based on a Pt porous catalyst film deposited on a β"-Al2O3 ceramic Ag+ conductor was developed and evaluated during propane oxidation. It was observed that upon anodic polarization, the rate of propane combustion was significantly electropromoted up to 400%. Moreover, for the first time, exponential increase of the catalytic rate was evidenced during galvanostatic transient experiment in excellent agreement with EPOC equation.

  12. Electrochemical Co-Reduction Synthesis of AuPt Bimetallic Nanoparticles-Graphene Nanocomposites for Selective Detection of Dopamine in the Presence of Ascorbic Acid and Uric Acid

    PubMed Central

    Zhao, Zongya; Zhang, Mingming; Chen, Xiang; Li, Youjun; Wang, Jue

    2015-01-01

    In this paper, AuPt bimetallic nanoparticles-graphene nanocomposites were obtained by electrochemical co-reduction of graphene oxide (GO), HAuCl4 and H2PtCl6. The as-prepared AuPt bimetallic nanoparticles-graphene nanocomposites were characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and other electrochemical methods. The morphology and composition of the nanocomposite could be easily controlled by adjusting the HAuCl4/H2PtCl6 concentration ratio. The electrochemical experiments showed that when the concentration ratio of HAuCl4/H2PtCl6 was 1:1, the obtained AuPt bimetallic nanoparticles-graphene nanocomposite (denoted as Au1Pt1NPs-GR) possessed the highest electrocatalytic activity toward dopamine (DA). As such, Au1Pt1NPs-GR nanocomposites were used to detect DA in the presence of ascorbic acid (AA) and uric acid (UA) using the differential pulse voltammetry (DPV) technique and on the modified electrode, there were three separate DPV oxidation peaks with the peak potential separations of 177 mV, 130 mV and 307 mV for DA and AA, DA and UA, AA and UA, respectively. The linear range of the constructed DA sensor was from 1.6 μM to 39.7 μM with a detection limit of 0.1 μM (S/N = 3). The obtained DA sensor with good stability, high reproducibility and excellent selectivity made it possible to detect DA in human urine samples. PMID:26184200

  13. Electrochemical Co-Reduction Synthesis of AuPt Bimetallic Nanoparticles-Graphene Nanocomposites for Selective Detection of Dopamine in the Presence of Ascorbic Acid and Uric Acid.

    PubMed

    Zhao, Zongya; Zhang, Mingming; Chen, Xiang; Li, Youjun; Wang, Jue

    2015-07-09

    In this paper, AuPt bimetallic nanoparticles-graphene nanocomposites were obtained by electrochemical co-reduction of graphene oxide (GO), HAuCl4 and H2PtCl6. The as-prepared AuPt bimetallic nanoparticles-graphene nanocomposites were characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and other electrochemical methods. The morphology and composition of the nanocomposite could be easily controlled by adjusting the HAuCl4/H2PtCl6 concentration ratio. The electrochemical experiments showed that when the concentration ratio of HAuCl4/H2PtCl6 was 1:1, the obtained AuPt bimetallic nanoparticles-graphene nanocomposite (denoted as Au1Pt1NPs-GR) possessed the highest electrocatalytic activity toward dopamine (DA). As such, Au1Pt1NPs-GR nanocomposites were used to detect DA in the presence of ascorbic acid (AA) and uric acid (UA) using the differential pulse voltammetry (DPV) technique and on the modified electrode, there were three separate DPV oxidation peaks with the peak potential separations of 177 mV, 130 mV and 307 mV for DA and AA, DA and UA, AA and UA, respectively. The linear range of the constructed DA sensor was from 1.6 μM to 39.7 μM with a detection limit of 0.1 μM (S/N = 3). The obtained DA sensor with good stability, high reproducibility and excellent selectivity made it possible to detect DA in human urine samples.

  14. Thermodynamic properties and equations of state for Ag, Al, Au, Cu and MgO using a lattice vibrational method

    NASA Astrophysics Data System (ADS)

    Jacobs, M.; Schmid-Fetzer, R.

    2012-04-01

    A prerequisite for the determination of pressure in static high pressure measurements, such as in diamond anvil cells is the availability of accurate equations of state for reference materials. These materials serve as luminescence gauges or as X-ray gauges and equations of state for these materials serve as secondary pressure scales. Recently, successful progress has been made in the development of consistency between static, dynamic shock-wave and ultrasonic measurements of equations of state (e.g. Dewaele et al. Phys. Rev. B70, 094112, 2004, Dorogokupets and Oganov, Doklady Earth Sciences, 410, 1091-1095, 2006, Holzapfel, High Pressure Research 30, 372-394, 2010) allowing testing models to arrive at consistent thermodynamic descriptions for X-ray gauges. Apart from applications of metallic elements in high-pressure work, thermodynamic properties of metallic elements are also of mandatory interest in the field of metallurgy for studying phase equilibria of alloys, kinetics of phase transformation and diffusion related problems, requiring accurate thermodynamic properties in the low pressure regime. Our aim is to develop a thermodynamic data base for metallic alloy systems containing Ag, Al, Au, Cu, Fe, Ni, Pt, from which volume properties in P-T space can be predicted when it is coupled to vibrational models. This mandates the description of metallic elements as a first step aiming not only at consistency in the pressure scales for the elements, but also at accurate representations of thermodynamic properties in the low pressure regime commonly addressed in metallurgical applications. In previous works (e.g. Jacobs and de Jong, Geochim. Cosmochim. Acta, 71, 3630-3655, 2007, Jacobs and van den Berg, Phys. Earth Planet. Inter., 186, 36-48, 2011) it was demonstrated that a lattice vibrational framework based on Kieffer's model for the vibrational density of states, is suitable to construct a thermodynamic database for Earth mantle materials. Such a database aims at

  15. Growth of periodic nano-layers of nano-crystals of Au, Ag, Cu by ion beam

    NASA Technical Reports Server (NTRS)

    Smith, Cydale C.; Zheng, B.; Muntele, C. I.; Muntele, I. C.; Ila, D.

    2005-01-01

    Multilayered thin films of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/, were grown by deposition. We have previously shown that MeV ion Bombardment of multi-nano-layers of SiO2/AU+ SiO2/ produces Au nanocrystals in the AU+ SiO2 layers. An increased number of nano-layers followed by MeV ion bombardment produces a wide optical absorption band, of which its FWHM depends on the number of nano-layers of SiO2/AU+ SiO2/. We have successfully repeated this process for nano-layers of SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/. In this work we used 5 MeV Si as the post deposition bombardment ion and monitored the location as well as the optical absorption's FWHM for each layered structure using Optical Absorption Photospectrometry. The concentration and location of the metal nano-crystals were measured by Rutherford Backscattering Spectrometry. We will report on the results obtained for nano-layered structures produced by post deposition bombardment of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/ layered systems as well as the results obtained from a system containing a periodic combination of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/.

  16. DNA-embedded Au-Ag core-shell nanoparticles assembled on silicon slides as a reliable SERS substrate.

    PubMed

    Zhang, Zhong; Zhang, Sha; Lin, Mengshi

    2014-05-07

    This study aimed at developing a sensitive and reliable SERS substrate by assembling DNA-embedded Au-Ag core-shell nanoparticles (NPs) on silicon slides. First, a monolayer of well separated DNA-functionalized Au NPs (40 nm) was decorated on (3-aminopropyl)triethoxysilane modified silicon slides. The DNA-embedded Au-Ag core-shell NPs were assembled on the 40 nm Au-DNA NPs to form a core-satellite structure through DNA hybridization. Using 4-MBA as a Raman dye, the SERS performance of the substrates was evaluated after being cleaned by low oxygen and argon plasma. The Raman intensity of the assembly using DNA-embedded Au-Ag core-shell NPs was 8-10 times higher than the intensity of the assembly using Au NPs as satellites. In addition, the signal-to-noise ratio of the assembly was 2.6 times higher than that of a commercial substrate (Klarite™) when a 785 nm laser was used. The SERS enhancements of the assembled substrates were 2.2 to 2.8 times higher than the Klarite when an acquisition time of 5 s was used at an excitation wavelength of 633 nm. The assembled substrates also show a good spot-to-spot and substrate-to-substrate reproducibility at the excitation wavelengths of 633 and 785 nm. These results demonstrate that the fabrication process is simple and cost-effective for assembling DNA-embedded Au-Ag core-shell NPs on silicon slides that can be used as a reliable SERS substrate.

  17. Pt-Au/MOx-CeO₂ (M = Mn, Fe, Ti) Catalysts for the Co-Oxidation of CO and H₂ at Room Temperature.

    PubMed

    Hong, Xiaowei; Sun, Ye; Zhu, Tianle; Liu, Zhiming

    2017-02-27

    A series of nanostructured Pt-Au/MOx-CeO₂ (M = Mn, Fe, Ti) catalysts were prepared and their catalytic performance for the co-oxidation of carbon monoxide (CO) and hydrogen (H₂) were evaluated at room temperature. The results showed that MOx promoted the CO oxidation of Pt-Au/CeO₂, but only the TiO₂ could enhance co-oxidation of CO and H₂ over Pt-Au/CeO₂. Related characterizations were conducted to clarify the promoting effect of MOx. Temperature-programmed reduction of hydrogen (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) results suggested that MOx could improve the charge transfer from Au sites to CeO₂, resulting in a high concentration of Ce(3+) and cationic Au species which benefits for the CO oxidation. In-situ diffuse reflectance infrared Fourier transform spectroscopy (In-situ DRIFTS) results indicated that TiO₂ could facilitate the oxidation of H₂ over the Pt-Au/TiO₂-CeO₂ catalyst.

  18. Simulation of 6 to 3 to 1 merge and squeeze of Au77+ bunches in AGS

    SciTech Connect

    Gardner, C. J.

    2016-05-09

    In order to increase the intensity per Au77+ bunch at AGS extraction, a 6 to 3 to 1 merge scheme was developed and implemented by K. Zeno during the 2016 RHIC run [1]. For this scheme, 12 Booster loads, each consisting of a single bunch, are delivered to AGS per AGS magnetic cycle. The bunch from Booster is itself the result of a 4 to 2 to 1 merge which is carried out on a at porch during the Booster magnetic cycle [2]. Each Booster bunch is injected into a harmonic 24 bucket on the AGS injection porch. In order to t into the buckets and allow for the AGS injection kicker rise time, the bunch width must be reduced by exciting quadrupole oscillations just before extraction from Booster [1]. The bunches are injected into two groups of six adjacent harmonic 24 buckets. In each group the 6 bunches are merged into 3 by bringing on RF harmonic 12 while reducing harmonic 24. This is a straightforward 2 to 1 merge (in which two adjacent bunches are merged into one). One ends up with two groups of three adjacent bunches sitting in harmonic 12 buckets. These bunches are accelerated to an intermediate porch for further merging. Doing the merge on a porch that sits above injection energy helps reduce losses that are believed to be due to the space-charge force acting on the bunched particles [3]. (The 6 to 3 merge is done on the injection porch because the harmonic 24 frequency on the intermediate porch would be too high for the AGS RF cavities.) On the intermediate porch each group of 3 bunches is merged into one by bringing on RF harmonics 8 and 4 and then reducing harmonics 12 and 8. One ends up with 2 bunches, each the result of a 6 to 3 to 1 merge and each sitting in a harmonic 4 bucket. This puts 6 Booster loads into each bunch. Each merged bunch needs to be squeezed into a harmonic 12 bucket for subsequent acceleration. This is done by again bringing on harmonic 8 and then harmonic 12.

  19. Tunable thermodynamic stability of Au-CuPt core-shell trimetallic nanoparticles by controlling the alloy composition: insights from atomistic simulations.

    PubMed

    Huang, Rao; Shao, Gui-Fang; Wen, Yu-Hua; Sun, Shi-Gang

    2014-11-07

    A microscopic understanding of the thermal stability of metallic core-shell nanoparticles is of importance for their synthesis and ultimately application in catalysis. In this article, molecular dynamics simulations have been employed to investigate the thermodynamic evolution of Au-CuPt core-shell trimetallic nanoparticles with various Cu/Pt ratios during heating processes. Our results show that the thermodynamic stability of these nanoparticles is remarkably enhanced upon rising Pt compositions in the CuPt shell. The melting of all the nanoparticles initiates at surface and gradually spreads into the core. Due to the lattice mismatch among Au, Cu and Pt, stacking faults have been observed in the shell and their numbers are associated with the Cu/Pt ratios. With the increasing temperature, they have reduced continuously for the Cu-dominated shell while more stacking faults have been produced for the Pt-dominated shell because of the significantly different thermal expansion coefficients of the three metals. Beyond the overall melting, all nanoparticles transform into a trimetallic mixing alloy coated by an Au-dominated surface. This work provides a fundamental perspective on the thermodynamic behaviors of trimetallic, even multimetallic, nanoparticles at the atomistic level, indicating that controlling the alloy composition is an effective strategy to realize tunable thermal stability of metallic nanocatalysts.

  20. Chitosan nanocomposite films based on Ag-NP and Au-NP biosynthesis by Bacillus Subtilis as packaging materials.

    PubMed

    Youssef, Ahmed M; Abdel-Aziz, Mohamed S; El-Sayed, Samah M

    2014-08-01

    Chitosan-silver (CS-Ag) and Chitosan-gold (CS-Au) nanocomposites films were synthesized by a simple chemical method. A local bacterial isolate identified as Bacillus subtilis ss subtilis was found to be capable to synthesize both silver nanoparticles (Ag-NP) and gold nanoparticles (Au-NP) from silver nitrate (AgNO3) and chloroauric acid (AuCl(4-)) solutions, respectively. The biosynthesis of both Ag-NP and Au-NP characterize using UV/vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD), and then added to chitosan by different ratios (0.5, 1 and 2%). The prepared chitosan nanocomposites films were characterize using UV, XRD, SEM and TEM. Moreover, the antibacterial activity of the prepared films was evaluated against gram positive (Staphylococcus aureus) and gram negative bacteria (Pseudomonas aerugenosa), fungi (Aspergillus niger) and yeast (Candida albicans). Therefore, these materials can be potential used as antimicrobial agents in packaging applications.

  1. Enhanced Raman and luminescence spectra from co-encapsulated silicon quantum dots and Au-Ag nanoalloys.

    PubMed

    Harun, Noor Aniza; Horrocks, Benjamin R; Fulton, David A

    2014-10-21

    We report an approach to enhance simultaneously luminescence and SERS signals with a single excitation wavelength by co-encapsulating silicon quantum dots and Au-Ag alloy nanoparticles encoded with Raman reporter molecules inside polymeric nanoparticles. The SERS-luminescence enhancement exploits the large Stokes shift of silicon quantum dots, which allows 'room' for the display of a Raman spectrum.

  2. Interfacial assembly of mussel-inspired au@ag@ polydopamine core-shell nanoparticles for recyclable nanocatalysts.

    PubMed

    Zhou, Jiajing; Duan, Bo; Fang, Zheng; Song, Jibin; Wang, Chenxu; Messersmith, Phillip B; Duan, Hongwei

    2014-02-01

    Recyclable nanocatalysts of core-shell bimetallic nanocrystals are developed through polydopamine coating-directed one-step seeded growth, interfacial assembly, and substrate-immobilization of Au@Ag core-shell nanocrystals. This strategy provides new opportunities to design and optimize heterogeneous nanocatalysts with tailored size, morphology, chemical configuration, and supporting substrates for metal-catalyzed reactions.

  3. Novel Au-Ag hybrid device for electrochemical SE(R)R spectroscopy in a wide potential and spectral range.

    PubMed

    Feng, Jiu-Ju; Gernert, Ulrich; Sezer, Murat; Kuhlmann, Uwe; Murgida, Daniel H; David, Christin; Richter, Marten; Knorr, Andreas; Hildebrandt, Peter; Weidinger, Inez M

    2009-01-01

    A nanostructured gold-silver-hybrid electrode for SER spectroelectrochemistry was developed which advantageously combines the electrochemical properties and chemical stability of Au and the strong surface enhancement of (resonance) Raman scattering by Ag. The layered device consists of a massive nanoscopically rough Ag electrode, a thin (2 nm) organic layer, and a ca. 20 nm thick Au film that may be coated by self-assembled monolayers for protein adsorption. The SERR-spectroscopic and electrochemical performance of this device is demonstrated using the heme protein cytochrome c as a benchmark model system, thereby extending, for the first time, SE(R)R studies of molecules on Au surfaces to excitation in the violet spectral range. The enhancement factor is only slightly lower than for Ag electrodes which can be rationalized in terms of an efficient transfer of plasmon resonance excitation from the Ag to the Au coating. This mechanism, which requires a thin dielectric layer between the two metals, is supported by theoretical calculations.

  4. Tailor-made Au@Ag core-shell nanoparticle 2D arrays on protein-coated graphene oxide with assembly enhanced antibacterial activity

    NASA Astrophysics Data System (ADS)

    Wang, Huiqiao; Liu, Jinbin; Wu, Xuan; Tong, Zhonghua; Deng, Zhaoxiang

    2013-05-01

    Water-dispersible two-dimensional (2D) assemblies of Au@Ag core-shell nanoparticles are obtained through a highly selective electroless silver deposition on pre-assembled gold nanoparticles on bovine serum albumin (BSA)-coated graphene oxide (BSA-GO). While neither BSA-GO nor AuNP-decorated BSA-GO shows any antibacterial ability, the silver-coated GO@Au nanosheets (namely GO@Au@Ag) exhibit an enhanced antibacterial activity against Gram-negative Escherichia coli (E. coli) bacteria, superior to unassembled Au@Ag nanoparticles and even ionic Ag. Such an improvement may be attributed to the increased local concentration of silver nanoparticles around a bacterium and a polyvalent interaction with the bacterial surface. In addition, the colloidal stability of this novel nano-antimicrobial against the formation of random nanoparticle aggregates guarantees a minimized activity loss of the Au@Ag nanoparticles. The antibacterial efficacy of GO@Au@Ag is less sensitive to the existence of Cl-, in comparison with silver ions, providing another advantage for wound dressing applications. Our research unambiguously reveals a strong and very specific interaction between the GO@Au@Ag nanoassembly and E. coli, which could be an important clue toward a rational design, synthesis and assembly of innovative and highly active antibacterial nanomaterials.

  5. A facile approach to prepare silicon-based Pt-Ag tubular dendritic nano-forests (tDNFs) for solar-light-enhanced methanol oxidation reaction.

    PubMed

    Lin, Chun-Ting; Shiao, Ming-Hua; Chang, Mao-Nan; Chu, Nancy; Chen, Yu-Wei; Peng, Yu-Hsuan; Liao, Bo-Huei; Huang, Hung Ji; Hsiao, Chien-Nan; Tseng, Fan-Gang

    2015-01-01

    In this paper, a facile two-step Galvanic replacement reaction (GRR) is proposed to prepare Pt-Ag tubular dendritic nano-forests (tDNFs) in ambient condition for enhancing methanol oxidation reaction (MOR) under solar illumination. In the first GRR, a homogeneous layer of silver dendritic nano-forests (DNFs) with 10 μm in thickness was grown on Si wafer in 5 min in silver nitride (AgNO3) and buffer oxide etchant (BOE) solution. In the second GRR, we utilized chloroplatinic acid (H2PtCl6) as the precursor for platinum (Pt) deposition to further transform the prepared Ag DNFs into Pt-Ag tDNFs. The catalytic performance and solar response of the Pt-Ag tDNFs toward methanol electro-oxidation are also studied by cyclic voltammetry (CV) and chronoamperometry (CA). The methanol oxidation current was boosted by 6.4% under solar illumination on the Pt-Ag tDNFs due to the induced localized surface plasmon resonance (LSPR) on the dendritic structure. Current results provide a cost-effective and facile approach to prepare solar-driven metallic electrodes potentially applicable to photo-electro-chemical fuel cells.

  6. A facile approach to prepare silicon-based Pt-Ag tubular dendritic nano-forests (tDNFs) for solar-light-enhanced methanol oxidation reaction

    NASA Astrophysics Data System (ADS)

    Lin, Chun-Ting; Shiao, Ming-Hua; Chang, Mao-Nan; Chu, Nancy; Chen, Yu-Wei; Peng, Yu-Hsuan; Liao, Bo-Huei; Huang, Hung Ji; Hsiao, Chien-Nan; Tseng, Fan-Gang

    2015-02-01

    In this paper, a facile two-step Galvanic replacement reaction (GRR) is proposed to prepare Pt-Ag tubular dendritic nano-forests (tDNFs) in ambient condition for enhancing methanol oxidation reaction (MOR) under solar illumination. In the first GRR, a homogeneous layer of silver dendritic nano-forests (DNFs) with 10 μm in thickness was grown on Si wafer in 5 min in silver nitride (AgNO3) and buffer oxide etchant (BOE) solution. In the second GRR, we utilized chloroplatinic acid (H2PtCl6) as the precursor for platinum (Pt) deposition to further transform the prepared Ag DNFs into Pt-Ag tDNFs. The catalytic performance and solar response of the Pt-Ag tDNFs toward methanol electro-oxidation are also studied by cyclic voltammetry (CV) and chronoamperometry (CA). The methanol oxidation current was boosted by 6.4% under solar illumination on the Pt-Ag tDNFs due to the induced localized surface plasmon resonance (LSPR) on the dendritic structure. Current results provide a cost-effective and facile approach to prepare solar-driven metallic electrodes potentially applicable to photo-electro-chemical fuel cells.

  7. [Au]/[Ag]-catalysed expedient synthesis of branched heneicosafuranosyl arabinogalactan motif of Mycobacterium tuberculosis cell wall

    PubMed Central

    Thadke, Shivaji A.; Mishra, Bijoyananda; Islam, Maidul; Pasari, Sandip; Manmode, Sujit; Rao, Boddu Venkateswara; Neralkar, Mahesh; Shinde, Ganesh P.; Walke, Gulab; Hotha, Srinivas

    2017-01-01

    Emergence of multidrug-resistant and extreme-drug-resistant strains of Mycobacterium tuberculosis (MTb) can cause serious socioeconomic burdens. Arabinogalactan present on the cellular envelope of MTb is unique and is required for its survival; access to arabinogalactan is essential for understanding the biosynthetic machinery that assembles it. Isolation from Nature is a herculean task and, as a result, chemical synthesis is the most sought after technique. Here we report a convergent synthesis of branched heneicosafuranosyl arabinogalactan (HAG) of MTb. Key furanosylations are performed using [Au]/[Ag] catalysts. The synthesis of HAG is achieved by the repetitive use of three reactions namely 1,2-trans furanoside synthesis by propargyl 1,2-orthoester donors, unmasking of silyl ether, and conversion of n-pentenyl furanosides into 1,2-orthoesters. Synthesis of HAG is achieved in 47 steps (with an overall yield of 0.09%) of which 21 are installation of furanosidic linkages in a stereoselective manner. PMID:28120821

  8. [Au]/[Ag]-catalysed expedient synthesis of branched heneicosafuranosyl arabinogalactan motif of Mycobacterium tuberculosis cell wall.

    PubMed

    Thadke, Shivaji A; Mishra, Bijoyananda; Islam, Maidul; Pasari, Sandip; Manmode, Sujit; Rao, Boddu Venkateswara; Neralkar, Mahesh; Shinde, Ganesh P; Walke, Gulab; Hotha, Srinivas

    2017-01-25

    Emergence of multidrug-resistant and extreme-drug-resistant strains of Mycobacterium tuberculosis (MTb) can cause serious socioeconomic burdens. Arabinogalactan present on the cellular envelope of MTb is unique and is required for its survival; access to arabinogalactan is essential for understanding the biosynthetic machinery that assembles it. Isolation from Nature is a herculean task and, as a result, chemical synthesis is the most sought after technique. Here we report a convergent synthesis of branched heneicosafuranosyl arabinogalactan (HAG) of MTb. Key furanosylations are performed using [Au]/[Ag] catalysts. The synthesis of HAG is achieved by the repetitive use of three reactions namely 1,2-trans furanoside synthesis by propargyl 1,2-orthoester donors, unmasking of silyl ether, and conversion of n-pentenyl furanosides into 1,2-orthoesters. Synthesis of HAG is achieved in 47 steps (with an overall yield of 0.09%) of which 21 are installation of furanosidic linkages in a stereoselective manner.

  9. Intracellular and in Vivo Cyanide Mapping via Surface Plasmon Spectroscopy of Single Au-Ag Nanoboxes.

    PubMed

    Wang, Peiyuan; Bai, Yujie; Yao, Chi; Li, Xiaomin; Zhou, Lei; Wang, Wenxing; El-Toni, Ahmed Mohamed; Zi, Jian; Zhao, Dongyuan; Shi, Lei; Zhang, Fan

    2017-02-21

    Cyanide is extremely toxic to organisms but difficult to detect in living biological specimens. Here, we report a new CN(-) sensing platform based on unmodified Au-Ag alloy nanoboxes that etch in the presence of this analyte, yielding a shift in plasmon frequency that correlates with the analyte concentration. Significantly, when combined with dark field microscopy, these particle probes can be used to measure CN(-) concentrations in HeLa cells and in vivo in Zebra fish embryos. The limit of detection (LOD) of the novel method is 1 nM (below the acceptable limit defined by the World Health Organization), and finite-difference time-domain (FDTD) calculations are used to understand the CN(-) induced spectral shifts.

  10. [Au]/[Ag]-catalysed expedient synthesis of branched heneicosafuranosyl arabinogalactan motif of Mycobacterium tuberculosis cell wall

    NASA Astrophysics Data System (ADS)

    Thadke, Shivaji A.; Mishra, Bijoyananda; Islam, Maidul; Pasari, Sandip; Manmode, Sujit; Rao, Boddu Venkateswara; Neralkar, Mahesh; Shinde, Ganesh P.; Walke, Gulab; Hotha, Srinivas

    2017-01-01

    Emergence of multidrug-resistant and extreme-drug-resistant strains of Mycobacterium tuberculosis (MTb) can cause serious socioeconomic burdens. Arabinogalactan present on the cellular envelope of MTb is unique and is required for its survival; access to arabinogalactan is essential for understanding the biosynthetic machinery that assembles it. Isolation from Nature is a herculean task and, as a result, chemical synthesis is the most sought after technique. Here we report a convergent synthesis of branched heneicosafuranosyl arabinogalactan (HAG) of MTb. Key furanosylations are performed using [Au]/[Ag] catalysts. The synthesis of HAG is achieved by the repetitive use of three reactions namely 1,2-trans furanoside synthesis by propargyl 1,2-orthoester donors, unmasking of silyl ether, and conversion of n-pentenyl furanosides into 1,2-orthoesters. Synthesis of HAG is achieved in 47 steps (with an overall yield of 0.09%) of which 21 are installation of furanosidic linkages in a stereoselective manner.

  11. Ultrafine Au and Ag Nanoparticles Synthesized from Self-Assembled Peptide Fibers and Their Excellent Catalytic Activity.

    PubMed

    Xu, Wenlong; Hong, Yue; Hu, Yuanyuan; Hao, Jingcheng; Song, Aixin

    2016-07-18

    The self-assembly of an amphiphilic peptide molecule to form nanofibers facilitated by Ag(+) ions was investigated. Ultrafine AgNPs (NPs=nanoparticles) with an average size of 1.67 nm were synthesized in situ along the fibers due to the weak reducibility of the -SH group on the peptide molecule. By adding NaBH4 to the peptide solution, ultrafine AgNPs and AuNPs were synthesized with an average size of 1.35 and 1.18 nm, respectively. The AuNPs, AgNPs, and AgNPs/nanofibers all exhibited excellent catalytic activity toward the reduction of 4-nitrophenol, with turnover frequency (TOF) values of 720, 188, and 96 h(-1) , respectively. Three dyes were selected for catalytic degradation by the prepared nanoparticles and the nanoparticles showed selective catalysis activity toward the different dyes. It was a surprising discovery that the ultrafine AuNPs in this work had an extremely high catalytic activity toward methylene blue, with a reaction rate constant of 0.21 s(-1) and a TOF value of 1899 h(-1) .

  12. Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by dip pen nanolithography.

    PubMed

    Baserga, Andrea; Viganò, Marco; Casari, Carlo S; Turri, Stefano; Li Bassi, Andrea; Levi, Marinella; Bottani, Carlo E

    2008-11-18

    We report on DNA arrays produced by dip pen nanolithography (DPN) on a novel Au-Ag micropatterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting multi-instrument and multitechnique local detection and analysis. Moreover the smooth surface of the Au squares ( approximately 5-10 A roughness) allows AFM/STM to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label-free detection methods for DNA nanoarrays based on the use of scanning probes.

  13. Chemical noise produced by equilibrium adsorption/desorption of surface pyridine at Au-Ag-Au bimetallic atom-scale junctions studied by fluctuation spectroscopy.

    PubMed

    Hwang, Tai-Wei; Branagan, Sean P; Bohn, Paul W

    2013-03-20

    The chemical noise contained in conductance fluctuations resulting from adsorption and desorption of pyridine at Au-Ag-Au bimetallic atom-scale junctions (ASJs) exhibiting ballistic electron transport is studied using fluctuation spectroscopy. ASJs are fabricated by electrochemical Ag deposition in a Au nanogap to produce a high-conductance Ag quantum wire, followed by electromigration-induced thinning in pyridine solution to create stable ASJs. The conductance behavior of the resulting ASJs is analyzed by sequential autocorrelation and Fourier transform of the current-time data to yield the power spectral density (PSD). In these experiments the PSDs from Ag ASJs in pyridine exhibit two main frequency regions: 1/f noise originating from resistance fluctuations of the junction itself at low frequencies, and a Lorentzian noise component arising from molecular adsorption/desorption fluctuations at higher frequencies. The characteristic cutoff frequency of the Lorentzian noise component determines the relaxation time of molecular fluctuations, which, in turn, is sensitive to the kinetics of the adsorption/desorption process. The kinetics are found to depend on concentration and on the adsorption binding energy. The junction size (<5G0), on the other hand, does not affect the kinetics, as the cutoff frequency remains unchanged. Concentration-dependent adsorption free energies are interpreted as arising from a distribution of binding energies, N(E(b)), on the Ag ASJ. Other observations, such as long lifetime ASJs and two-level fluctuations in conductance, provide additional evidence for the integral role of the adsorbate in determining ASJ reorganization dynamics.

  14. Dual-frequency plasmon lasing modes in active three-layered bimetallic Ag/Au nanoshells

    NASA Astrophysics Data System (ADS)

    Wu, DaJian; Wu, XueWei; Cheng, Ying; Jin, BiaoBing; Liu, XiaoJun

    2015-11-01

    The optical properties of three-layered silver-gold-silica (SGS) nanoshells with gain have been investigated theoretically by using Mie theory. Surface plasmon amplification by stimulated emission of radiation (spaser) phenomena can be observed at two plasmon modes of the active SGS nanoshell in the visible region. It is found with the decrease in the radius of the inner Ag core that the critical value of ɛg″(ωg ) for the super-resonance of the low-energy mode increases first and then decreases while that for the high-energy mode decreases. An interesting overlap between the two curves for the critical value of ɛg″(ωg ) can be found at a special core radius. At this point, two super-resonances can be achieved concurrently at the low- and high-energy modes of the active SGS nanoshell with the same gain coefficient. This dual-frequency spaser based on the bimetallic Ag/Au nanoshell may be an efficient candidate for designing the nanolaser.

  15. Real-Time Ab Initio KMC Simulation of the Self-Assembly and Sintering of Bimetallic Epitaxial Nanoclusters: Au + Ag on Ag(100)

    SciTech Connect

    Han, Yong; Liu, Da-Jiang; Evans, James W

    2014-08-13

    Far-from-equilibrium shape and structure evolution during formation and post-assembly sintering of bimetallic nanoclusters is extremely sensitive to the periphery diffusion and intermixing kinetics. Precise characterization of the many distinct local-environment-dependent diffusion barriers is achieved for epitaxial nanoclusters using density functional theory to assess interaction energies both with atoms at adsorption sites and at transition states. Kinetic Monte Carlo simulation incorporating these barriers then captures structure evolution on the appropriate time scale for two-dimensional core-ring and intermixed Au-Ag nanoclusters on Ag(100).

  16. Role of different Pd/Pt ensembles in determining CO chemisorption on Au-based bimetallic alloys: A first-principles study

    NASA Astrophysics Data System (ADS)

    Ham, Hyung Chul; Manogaran, Dhivya; Hwang, Gyeong S.; Han, Jonghee; Kim, Hyoung-Juhn; Nam, Suk Woo; Lim, Tae Hoon

    2015-03-01

    Using spin-polarized density functional calculations, we investigate the role of different Pd/Pt ensembles in determining CO chemisorption on Au-based bimetallic alloys through a study of the energetics, charge transfer, geometric and electronic structures of CO on various Pd/Pt ensembles (monomer/dimer/trimer/tetramer). We find that the effect of Pd ensembles on the reduction of CO chemisorption energy is much larger than the Pt ensemble case. In particular, small-sized Pd ensembles like monomer show a substantial reduction of CO chemisorption energy compared to the pure Pd (1 1 1) surface, while there are no significant size and shape effects of Pt ensembles on CO chemisorption energy. This is related to two factors: (1) the steeper potential energy surface (PES) of CO in Pd (1 1 1) than in Pt (1 1 1), indicating that the effect of switch of binding site preference on CO chemisorption energy is much larger in Pd ensembles than in Pt ensembles, and (2) down-shift of d-band in Pd ensembles/up-shift of d-band in Pt ensembles as compared to the corresponding pure Pd (1 1 1)/Pt (1 1 1) surfaces, suggesting more reduced activity of Pd ensembles toward CO adsorption than the Pt ensemble case. We also present the different bonding mechanism of CO on Pd/Pt ensembles by the analysis of orbital resolved density of state.

  17. Resonance scattering spectral detection of catalase activity using Au@Ag nanoparticle as probe and coupling catalase catalytic reaction with Fenton reaction.

    PubMed

    Liang, Aihui; Liang, Yueyuan; Jiang, Zhiliang; Jiang, Hesheng

    2009-11-01

    The Au(core)Ag(shell) (Au@Ag) nanoparticles in size of 30 nm were prepared using 10 nm gold nanoparticles as seeds at 90 degrees C, and were purified by high-speed centrifugation to remove the excess trisodium citrate to obtain Au@Ag nanoprobe. In the medium of pH 4.0 acetate buffer solution--7.2 micromol/L H2O2--67 micromol/L Fe(II), Au@Ag nanoparticles exhibited a resonance scattering (RS) peak at 538 nm. Upon addition of Catalase (Ct), the system produced hydroxyl radical that oxidized the Au@Ag nanoprobe to form the AuAg nanoparticles with partly bare nanogold. Those AuAg nanoparticles aggregated to large nanoclusters that led to the RS peak wavelength red-shift and its RS peak intensity enhanced. The catalase activity (C) is linear to the enhanced RS intensity (DeltaI) in the range of 6 to 2,800 U/L, with regression equation of DeltaI = 0.168 C-0.2, the correlation coefficient of 0.9952, and detection limit of 2.8 U/L. This method was applied to the detection of serum samples, and the results were agreement with that of the spectrophotometry. A new catalytic mechanism of catalase was proposed with oxywater principle that was agreement with the results of resonance scattering spectroscopy, absorption spectrophotometry, transmission electron microscopy and laser scattering.

  18. Controlled preparation of Au/Ag/SnO2 core-shell nanoparticles using a photochemical method and applications in LSPR based sensing.

    PubMed

    Zhou, Na; Ye, Chen; Polavarapu, Lakshminarayana; Xu, Qing-Hua

    2015-05-21

    A photochemical method for the controlled preparation of core-shell Au/Ag/SnO2 nanorods (NRs) and nanospheres (NSs) has been developed based on photo-induced electron transfer processes in the plasmonic metal-semiconductor system. Au/AgNR/SnO2 and Au/AgNS/SnO2 were prepared by the UV irradiation of a mixture of mesoporous SnO2 coated AuNRs, or AuNSs, and AgNO3, in which AgNO3 was reduced by electrons transferred from the photo-excited mesoporous SnO2 (semiconductor) to the gold (metal). This method allows precise control over the composition and optical properties of the obtained nanoparticles. The LSPR refractive index sensitivity of the obtained Au/AgNR/SnO2 nanoparticles has been optimized to obtain a refractive index sensitivity of ∼442 nm RIU(-1). The optimized nanoparticles were subsequently chosen for the LSPR based sensing of glutathione (GSH) with the limit of detection of ∼7.5 × 10(-7) M. This photochemical method allows the controlled preparation of various Au/Ag/SnO2 nanoparticles to adjust their LSPR to suit various applications.

  19. Size evolution of nanomagnetic particles and magnetotransport properties of (Co90Fe10)20Ag80 nanogranular films: influence of Cu80Ag15Au5 underlayer

    NASA Astrophysics Data System (ADS)

    Öksüzoğlu, Ramis Mustafa; Meshcheryakov, Vladimir F.; Ayas, Erhan

    2012-06-01

    The influence of (Co90Fe10)20Ag80 film thickness and of Cu80Ag15Au5 underlayer on nanomagnetic, magnetotransport and structural properties of (Co90Fe10)20Ag80 nanogranular films prepared by ultra-high vacuum ion beam sputtering technique have been investigated using X-ray diffraction, X-ray reflectivity and vibrating sample magnetometer. Films indicate a superparamagnetic behavior. The evolution of the magnetic particle size in (Co90Fe10)20Ag80 film with different thicknesses was calculated by fit of magnetization curves using Langevin equation. A parallel resistance model has been used to determine particle size distribution. The average (mean) particle sizes range from 1.6 to 2.1 nm. A linear dependence of giant magnetoresistance (GMR) on the particle size has been found. This result is also supported by the observed linear correlation between the square root of the effective magnetization and the particle size. Furthermore, a linear correlation between the square of GMR and the distance between particles has been found. This remains unchanged also in (Co90Fe10)20Ag80 films with Cu80Ag15Au5 underlayer. Using of the underlayer leads to an enhancement of the mean particle size (1.8-2.5 nm) and GMR; however, to a reduction of distances between particles accompanied by the destruction of the <111> texture in the Ag matrix structure. The reason of the GMR effect in the nanogranular films is discussed by means of the obtained results.

  20. On the Effect of Native SiO2 on Si over the SPR-mediated Photocatalytic Activities of Au and Ag Nanoparticles.

    PubMed

    Wang, Jiale; de Freitas, Isabel; Alves, Tiago; Ando, Romulo A; Fang, Zebo; Camargo, Pedro

    2017-04-11

    In hybrid materials containing plasmonic nanoparticles such as Au and Ag, charge transfer processes from and to Au or Ag can affect both activities and selectivity in plasmonic catalysis. Inspired by the widespread utilization of commercial Si wafers in SERS studies, we investigated herein the effect of the native SiO2 layer on Si wafers over the SPR-mediated activities of the Au and Ag NPs. We prepared SERS-active plasmonic comprised of Au and Ag NPs deposited onto a Si wafer. Here, two kinds of Si wafers were employed: Si having a native oxide surface layer (Si/SiO2) and Si without a native oxide surface layer (Si). This led to Si/SiO2/Au, Si/SiO2/Ag, Si/Au, and Si/Ag NPs. The SPR-mediated oxidation of p-aminothiophenol (PATP) to p,p'-dimercaptoazobenzene (DMAB) was employed as a model transformation. By comparing the performances and band structures for the Si/Au and Si/Ag relative to Si/SiO2/Au and Si/SiO2/Ag NPs, it was found that the presence of a SiO2 layer was crucial to enable higher SPR-mediated PATP to DMAB conversions. The SiO2 layer acts preventing the charge transfer of SPR-excited hot electrons from Au or Ag nanoparticles to the Si substrate. This enabled SPR-excited hot electrons to be transferred to adsorbed O2 molecules, which then participate in the selective oxidation of PATP to DMAB. In the absence of a SiO2 layer, SPR-excited hot electrons are preferentially transferred to Si instead of adsorbed O2 molecules, leading to much lower PATP oxidation.

  1. Highly efficient and porous TiO2-coated Ag@Fe3O4@C-Au microspheres for degradation of organic pollutants

    NASA Astrophysics Data System (ADS)

    Shen, Mao; Chen, Suqing; Jia, Wenping; Fan, Guodong; Jin, Yanxian; Liang, Huading

    2016-12-01

    In this paper, we reported a novel hierarchical porous Ag@Fe3O4@C-Au@TiO2 core@shell microspheres with a highly photocatalytic activity and magnetically separable properties. The synthesis method is included of a Fe3O4 magnetic embedded Ag core (Ag@Fe3O4), an interlayer of carbon modified by PEI to form sufficient amounts of amine functional groups (Ag@Fe3O4@C-PEI), the grafting of Au nanoparticles on the surface of Ag@Fe3O4@C-PEI (Ag@Fe3O4@C-Au), and an ordered porous TiO2 structured shell. As an example of the applications, the photocatalytic activities of the samples were investigated by the reduction of Rhodamine B (RhB) under visible-light irradiation. The results show that the porous Ag@Fe3O4@C-Au@TiO2 core@shell microspheres display higher adsorption and photocatalytic activities compared to the pure porous TiO2 and Ag@Fe3O4@C@TiO2 microspheres, which are attributed to the local surface plasmon resonance (LSPR) by the Ag and Au nanoparticles and the high specific surface area.

  2. Ultrasensitive electrochemical sensor for Hg(2+) by using hybridization chain reaction coupled with Ag@Au core-shell nanoparticles.

    PubMed

    Li, Zongbing; Miao, Xiangmin; Xing, Ke; Peng, Xue; Zhu, Aihua; Ling, Liansheng

    2016-06-15

    A novel electrochemical biosensor for Hg(2+) detection was reported by using DNA-based hybridization chain reaction (HCR) coupled with positively charged Ag@Au core-shell nanoparticles ((+)Ag@Au CSNPs) amplification. To construct the sensor, capture probe (CP ) was firstly immobilized onto the surface of glass carbon electrode (GCE). In the presence of Hg(2+), the sandwiched complex can be formed between the immobilized CP on the electrode surface and the detection probe (DP) modified on the gold nanoparticles (AuNPs) based on T-Hg(2+)-T coordination chemistry. The carried DP then opened two ferrocene (Fc) modified hairpin DNA (H1 and H2) in sequence and propagated the happen of HCR to form a nicked double-helix. Numerous Fc molecules were formed on the neighboring probe and produced an obvious electrochemical signal. Moreover, (+)Ag@Au CSNPs were assembly onto such dsDNA polymers as electrochemical signal enhancer. Under optimal conditions, such sensor presents good electrochemical responses for Hg(2+) detection with a detection limit of 3.6 pM. Importantly, the methodology has high selectivity for Hg(2+) detection.

  3. Ag/Au/Polypyrrole Core-shell Nanowire Network for Transparent, Stretchable and Flexible Supercapacitor in Wearable Energy Devices

    NASA Astrophysics Data System (ADS)

    Moon, Hyunjin; Lee, Habeom; Kwon, Jinhyeong; Suh, Young Duk; Kim, Dong Kwan; Ha, Inho; Yeo, Junyeob; Hong, Sukjoon; Ko, Seung Hwan

    2017-02-01

    Transparent and stretchable energy storage devices have attracted significant interest due to their potential to be applied to biocompatible and wearable electronics. Supercapacitors that use the reversible faradaic redox reaction of conducting polymer have a higher specific capacitance as compared with electrical double-layer capacitors. Typically, the conducting polymer electrode is fabricated through direct electropolymerization on the current collector. However, no research have been conducted on metal nanowires as current collectors for the direct electropolymerization, even though the metal nanowire network structure has proven to be superior as a transparent, flexible, and stretchable electrode platform because the conducting polymer’s redox potential for polymerization is higher than that of widely studied metal nanowires such as silver and copper. In this study, we demonstrated a highly transparent and stretchable supercapacitor by developing Ag/Au/Polypyrrole core-shell nanowire networks as electrode by coating the surface of Ag NWs with a thin layer of gold, which provide higher redox potential than the electropolymerizable monomer. The Ag/Au/Polypyrrole core-shell nanowire networks demonstrated superior mechanical stability under various mechanical bending and stretching. In addition, proposed supercapacitors showed fine optical transmittance together with fivefold improved areal capacitance compared to pristine Ag/Au core-shell nanowire mesh-based supercapacitors.

  4. Ag/Au/Polypyrrole Core-shell Nanowire Network for Transparent, Stretchable and Flexible Supercapacitor in Wearable Energy Devices.

    PubMed

    Moon, Hyunjin; Lee, Habeom; Kwon, Jinhyeong; Suh, Young Duk; Kim, Dong Kwan; Ha, Inho; Yeo, Junyeob; Hong, Sukjoon; Ko, Seung Hwan

    2017-02-03

    Transparent and stretchable energy storage devices have attracted significant interest due to their potential to be applied to biocompatible and wearable electronics. Supercapacitors that use the reversible faradaic redox reaction of conducting polymer have a higher specific capacitance as compared with electrical double-layer capacitors. Typically, the conducting polymer electrode is fabricated through direct electropolymerization on the current collector. However, no research have been conducted on metal nanowires as current collectors for the direct electropolymerization, even though the metal nanowire network structure has proven to be superior as a transparent, flexible, and stretchable electrode platform because the conducting polymer's redox potential for polymerization is higher than that of widely studied metal nanowires such as silver and copper. In this study, we demonstrated a highly transparent and stretchable supercapacitor by developing Ag/Au/Polypyrrole core-shell nanowire networks as electrode by coating the surface of Ag NWs with a thin layer of gold, which provide higher redox potential than the electropolymerizable monomer. The Ag/Au/Polypyrrole core-shell nanowire networks demonstrated superior mechanical stability under various mechanical bending and stretching. In addition, proposed supercapacitors showed fine optical transmittance together with fivefold improved areal capacitance compared to pristine Ag/Au core-shell nanowire mesh-based supercapacitors.

  5. Ag/Au/Polypyrrole Core-shell Nanowire Network for Transparent, Stretchable and Flexible Supercapacitor in Wearable Energy Devices

    PubMed Central

    Moon, Hyunjin; Lee, Habeom; Kwon, Jinhyeong; Suh, Young Duk; Kim, Dong Kwan; Ha, Inho; Yeo, Junyeob; Hong, Sukjoon; Ko, Seung Hwan

    2017-01-01

    Transparent and stretchable energy storage devices have attracted significant interest due to their potential to be applied to biocompatible and wearable electronics. Supercapacitors that use the reversible faradaic redox reaction of conducting polymer have a higher specific capacitance as compared with electrical double-layer capacitors. Typically, the conducting polymer electrode is fabricated through direct electropolymerization on the current collector. However, no research have been conducted on metal nanowires as current collectors for the direct electropolymerization, even though the metal nanowire network structure has proven to be superior as a transparent, flexible, and stretchable electrode platform because the conducting polymer’s redox potential for polymerization is higher than that of widely studied metal nanowires such as silver and copper. In this study, we demonstrated a highly transparent and stretchable supercapacitor by developing Ag/Au/Polypyrrole core-shell nanowire networks as electrode by coating the surface of Ag NWs with a thin layer of gold, which provide higher redox potential than the electropolymerizable monomer. The Ag/Au/Polypyrrole core-shell nanowire networks demonstrated superior mechanical stability under various mechanical bending and stretching. In addition, proposed supercapacitors showed fine optical transmittance together with fivefold improved areal capacitance compared to pristine Ag/Au core-shell nanowire mesh-based supercapacitors. PMID:28155913

  6. Modification of energy band alignment and electric properties of Pt/Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}/Pt thin-film ferroelectric varactors by Ag impurities at interfaces

    SciTech Connect

    Hirsch, S.; Komissinskiy, P. Flege, S.; Li, S.; Rachut, K.; Klein, A.; Alff, L.

    2014-06-28

    We report on the effects of Ag impurities at interfaces of parallel-plate Pt/Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}/Pt thin film ferroelectric varactors. Ag impurities occur at the interfaces due to diffusion of Ag from colloidal silver paint used to attach the varactor samples with their back side to the plate heated at 600–750 °C during deposition of Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}. X-ray photoelectron spectroscopy and secondary ion mass spectrometry suggest that amount and distribution of Ag adsorbed at the interfaces depend strongly on the adsorbent surface layer. In particular, Ag preferentially accumulates on top of the Pt bottom electrode. The presence of Ag significantly reduces the barrier height between Pt and Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} leading to an increased leakage current density and, thus, to a severe degradation of the varactor performance.

  7. Edgeless Ag-Pt Bimetallic Nanocages: In Situ Monitor Plasmon-Induced Suppression of Hydrogen Peroxide Formation.

    PubMed

    Lin, Sheng-Chih; Hsu, Chia-Shuo; Chiu, Shih-Yun; Liao, Tzu-Yu; Chen, Hao Ming

    2017-02-15

    Improvements in the performance of electrocatalysts, along with continuing advances in selective pathway for target reaction, have great potential to offer opportunities in designing competitive reactions especially for using a photophysical process owing to its tunable properties. Herein, we demonstrated a first empirical evidence of suppressing the formation of undesired peroxide intermediate through plasmonic effects, in which plasmonic Ag-Pt bimetallic nanocages were synthesized with an edgeless feature, and a custom-made RDE/RRDE working station was designed to provide unique means by which to in situ realize the plasmon-induced effects toward the target reaction. The edgeless Ag-Pt bimetallic nanocages with hollow interior performed newly plasmon-induced effects, which was characteristic of photodependent nature to suppress the formation of undesired peroxide intermediate. We concluded that the plasmon-induced hot electron transfer governed the suppression of peroxide formation instead of plasmon-induced heating that would cause a negative effect (i.e., increase of peroxide yield), in which the hot electron transfer of Ag nanostructure offered a sufficient energy to populate the antibonding orbital of O2 as illustrated by in situ X-ray absorption approach. This rapid light-dependent nature corresponding to localized surface plasmon resonance in present nanocages can potentially offer synergetic strategies toward altering the chemical reactions or reaction pathways in various fields.

  8. Current transport mechanisms in lattice-matched Pt/Au-InAlN/GaN Schottky diodes

    SciTech Connect

    Ren, Jian; Yan, Dawei Yang, Guofeng; Wang, Fuxue; Xiao, Shaoqing; Gu, Xiaofeng

    2015-04-21

    Lattice-matched Pt/Au-In{sub 0.17}Al{sub 0.83}N/GaN hetreojunction Schottky diodes with circular planar structure have been fabricated and investigated by temperature dependent electrical measurements. The forward and reverse current transport mechanisms are analyzed by fitting the experimental current-voltage characteristics of the devices with various models. The results show that (1) the forward-low-bias current is mainly due to the multiple trap-assisted tunneling, while the forward-high-bias current is governed by the thermionic emission mechanism with a significant series resistance effect; (2) the reverse leakage current under low electric fields (<6 MV/cm) is mainly carried by the Frenkel-Poole emission electrons, while at higher fields the Fowler-Nordheim tunneling mechanism dominates due to the formation of a triangular barrier.

  9. H2 production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania

    PubMed Central

    Jones, W.; Hardacre, C.; Bowker, M.

    2016-01-01

    Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pre-treatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example. PMID:27493561

  10. Characteristics and Distribution of Mineral Textures and Fluid Inclusions in the Epithermal Ag-Au Deposits at Guanajuato, Mexico

    NASA Astrophysics Data System (ADS)

    Moncada, D.; Bodnar, R. J.; Reynolds, T. J.; Rimstidt, J. D.; Mutchler, S.

    2009-05-01

    Fluid inclusion and mineralogical features indicative of boiling have been characterized in 855 samples from epithermal precious metals deposits along the Veta Madre at Guanajuato, Mexico. Features associated with boiling that have been identified include colloform texture silica, plumose texture silica, moss texture silica, ghost-sphere texture silica, lattice-bladed calcite, lattice-bladed calcite replaced by quartz and pseudo-acicular quartz after calcite and coexisting liquid-rich and vapor-rich fluid inclusions. Samples were assayed for Au, Ag, Cu, Pb, Zn, As and Sb, and were divided into high-grade and low-grade samples based on the gold and silver concentrations. For silver, the cutoff for high grade was 100 ppm, and for gold the cutoff was 1 ppm. The feature that is most closely associated with high grades of both gold and silver is colloform texture silica, and this feature also shows the largest difference in grade based on the presence or absence of that feature (178.8 ppm Ag versus 17.2 ppm Ag, and 1.1 ppm Au versus 0.2 ppm Au). For both Ag and Au, there is no significant difference in average grade in samples that contain coexisting liquid-rich and vapor-rich fluid inclusions and those where this feature is absent. The textural and fluid inclusion data were analyzed using the binary classifier within SPSS Clementine. The models that correctly distinguish between high and low grade samples most consistently (˜70-75% of the tests) for both Ag and Au were the neural network, the C5 decision tree and Quest decision tree models. For both Au and Ag, the presence of colloform silica texture is the variable with the greatest importance, i.e., the variable that has the greatest predictive power. Boiling features are absent or rare in samples collected along a traverse perpendicular to the Veta Madre. This suggests that if an explorationist observes these features in samples collected during exploration, an environment favorable to precious metal mineralization

  11. Au-Ag polymetallic mineralization within tectonically weak zones along the southwestern edge of the Colorado Plateau

    SciTech Connect

    Wenrich, K.J.; Silberman, M.L. )

    1993-04-01

    The Music Mountain mining district lies at the base of the Grand Wash Cliffs, a major fault-line scarp along the Grand Wash fault, which marks the SW margin of the Colorado Plateau. Nearly vertical Au-Ag polymetallic quartz veins parallel, and are in contact with, altered diabase and granite porphyry dikes that cut Proterozoic granite, schist, and gneiss. The gold-bearing veins range in thickness from an inch to several feet and contain significant amounts of sulfide minerals. Diabase dikes and quartz veins in the district and to the north consistently strike N42[degree]W to N57[degree]W, which is one of the most prevalent fracture orientation throughout NW Arizona. In the Gold Basin-Lost Basin districts to the north, the Au occurs in such pegmatite-quartz veins that strike NE. Thirty miles east along Diamond Creek, quartz veins and diabase dikes strike N45[degree]E and are associated with Au and Ag anomalies in stream-sediments and panned concentrates. To the west major Au-Ag polymetallic quartz veins of the Wallapai mining district show consistent strikes from N30[degree] to 60[degree]W. K-Ar ages of hydrothermal alterations of 4 NW oriented diabase dikes that have quartz veins along them, range from 935 [+-] 35 to 755 [+-] 21 Ma. Sericite from altered granite porphyry, adjacent to a mineralized vein, gave a K-Ar age of 72 [+-]2 Ma. All geochemical sites (within a 1,000 mi[sup 2] area) determined to be anomalous in Au lie within 2 mi of either the Grand Wash or Hurricane faults. The Hurricane and Grand Wash faults, major Precambrian fault zones that were reactivated in the Phanerozoic, appear to be good exploration targets for Au-rich quartz veins associated with pegmatite or diabase dikes, many of which may be buried beneath the thick alluvium of Hualapai Valley.

  12. Hotspots engineering by grafting Au@Ag core-shell nanoparticles on the Au film over slightly etched nanoparticles substrate for on-site paraquat sensing.

    PubMed

    Wang, Chaoguang; Wu, Xuezhong; Dong, Peitao; Chen, Jian; Xiao, Rui

    2016-12-15

    Paraquat (PQ) pollutions are ultra-toxic to human beings and hard to be decomposed in the environment, thus requiring an on-site detection strategy. Herein, we developed a robust and rapid PQ sensing strategy based on the surface-enhanced Raman scattering (SERS) technique. A hybrid SERS substrate was prepared by grafting the Au@Ag core-shell nanoparticles (NPs) on the Au film over slightly etched nanoparticles (Au FOSEN). Hotspots were engineered at the junctions as indicated by the finite difference time domain calculation. SERS performance of the hybrid substrate was explored using p-ATP as the Raman probe. The hybrid substrate gives higher enhancement factor comparing to either the Au FOSEN substrate or the Au@Ag core-shell NPs, and exhibits excellent reproducibility, homogeneity and stability. The proposed SERS substrates were prepared in batches for the practical PQ sensing. The total analysis time for a single sample, including the pre-treatment and measurement, was less than 5min with a PQ detection limit of 10nM. Peak intensities of the SERS signal were plotted as a function of the PQ concentrations to calibrate the sensitivity by fitting the Hill's equation. The plotted calibration curve showed a good log-log linearity with the coefficient of determination of 0.98. The selectivity of the sensing proposal was based on the "finger print" Raman spectra of the analyte. The proposed substrate exhibited good recovery when it applied to real water samples, including lab tap water, bottled water, and commercially obtained apple juice and grape juice. This SERS-based PQ detection method is simple, rapid, sensitive and selective, which shows great potential in pesticide residue and additives abuse monitoring.

  13. Noble metal (Pd, Ru, Rh, Pt, Au, Ag) doped graphene hybrids for electrocatalysis.

    PubMed

    Giovanni, Marcella; Poh, Hwee Ling; Ambrosi, Adriano; Zhao, Guanjia; Sofer, Zdeněk; Šaněk, Filip; Khezri, Bahareh; Webster, Richard D; Pumera, Martin

    2012-08-21

    Metal decorated graphene materials are highly important for catalysis. In this work, noble metal doped-graphene hybrids were prepared by a simple and scalable method. The thermal reductions of metal doped-graphite oxide precursors were carried out in nitrogen and hydrogen atmospheres and the effects of these atmospheres as well as the metal components on the characteristics and catalytic capabilities of the hybrid materials were studied. The hybrids exfoliated in nitrogen atmosphere contained a higher amount of oxygen-containing groups and lower density of defects on their surfaces than hybrids exfoliated in hydrogen atmosphere. The metals significantly affected the electrochemical behavior and catalysis of compounds that are important in energy production and storage and in electrochemical sensing. Research in the field of energy storage and production, electrochemical sensing and biosensing as well as biomedical devices can take advantage of the properties and catalytic capabilities of the metal doped graphene hybrids.

  14. Potential energy barriers for interlayer mass transport in homoepitaxial growth on fcc(111) surfaces: Pt and Ag

    NASA Astrophysics Data System (ADS)

    Li, Yinggang; DePristo, Andrew E.

    1994-11-01

    The efficiency of interlayer mass transport determines the growth mode and film quality in molecular beam epitaxy. In this paper we report potential energy barriers (PEB) to interlayer diffusion for Pt and Ag homoepitaxial growth on fcc (111) surfaces, as calculated using the corrected effective medium theory. Various island structures were considered. The island sizes ranged from 3- to about 60-atom islands and to various steps ("infinite" large islands). We found that jumping directly over the island edge has a much higher PEB than does the so-called displacement-exchange mechanism. Exchange at edges with kink sites also had a higher or comparable PEB to those at the straight (perfect) edges, contrary to previous speculations [M. Henzler, T. Schmidt and E.Z. Luo, in: The Structure of Surfaces IV (World Scientific, Signapore, 1994)]. The PEB depended strongly on the local atomic arrangement but was insensitive to the global island size and shape as long as the island edges were at least five atoms long. For the displacement-exchange process, the PEB did not decrease monotonically with decreasing island size over the entire island size range. For very small islands of less than ten atoms the PEB increased abruptly by an order of magnitude. This qualitative behavior was exhibited by both Pt and Ag systems but the two differed quantitatively for island sizes above ten atoms. We discuss the relevance of these results to the experimental observations, i.e., the reentrant growth in Pt [R. Kunkel, B. Poelsema, L.K. Verheij and G. Comsa, Phys. Rev. Lett. 65 (1990) 733], layer-by-layer growth in Ag induced by surfactant [H.A. van der Vegt, H.M. van Pinxteren, M. Lohmerier and E. Vlieg, Phys. Rev. Lett. 68 (1992) 3335] or by high-density of islands [G. Rosenfeld, R. Servaty, C. Teichert, B. Poelsema and G. Comsa, Phys. Rev. Lett. 71 (1993) 895 ], as well as the different growth behaviors found in the two systems.

  15. Hardening behavior after high-temperature solution treatment of Ag-20Pd-12Au-xCu alloys with different Cu contents for dental prosthetic restorations.

    PubMed

    Kim, Yonghwan; Niinomi, Mitsuo; Hieda, Junko; Nakai, Masaaki; Cho, Ken; Fukui, Hisao

    2014-07-01

    Ag-Pd-Au-Cu alloys have been used widely for dental prosthetic applications. Significant enhancement of the mechanical properties of the Ag-20Pd-12Au-14.5Cu alloy as a result of the precipitation of the β' phase through high-temperature solution treatment (ST), which is different from conventional aging treatment in these alloys, has been reported. The relationship between the unique hardening behavior and precipitation of the β' phase in Ag-20Pd-12Au-xCu alloys (x=6.5, 13, 14.5, 17, and 20mass%) subjected to the high-temperature ST at 1123K for 3.6ks was investigated in this study. Unique hardening behavior after the high-temperature ST also occurs in Ag-20Pd-12Au-xCu alloys (x=13, 17, and 20) with precipitation of the β' phase. However, hardening is not observed and the β' phase does not precipitate in the Ag-20Pd-12Au-6.5Cu alloy after the same ST. The tensile strength and 0.2% proof stress also increase in Ag-20Pd-12Au-xCu alloys (x=13, 14.5, 17, and 20) after the high-temperature ST. In addition, these values after the high-temperature ST increase with increasing Cu content in Ag-20Pd-12Au-xCu alloys (x=14.5, 17, and 20). The formation process of the β' phase can be explained in terms of diffusion of Ag and Cu atoms and precipitation of the β' phase. Clarification of the relationship between hardening and precipitation of the β' phase via high-temperature ST is expected to help the development of more effective heat treatments for hardening in Ag-20Pd-12Au-xCu alloys.

  16. The synthesis of Au@C@Pt core-double shell nanocomposite and its application in enzyme-free hydrogen peroxide sensing

    NASA Astrophysics Data System (ADS)

    Zhang, Yayun; Li, Yuhui; Jiang, Yingying; Li, Yancai; Li, Shunxing

    2016-08-01

    A novel Au@C@Pt core-double shell nanocomposite was synthesized and used to fabricate enzyme-free electrochemical sensor for rapid and sensitive detection of hydrogen peroxide (H2O2). The well-designed Au@C@Pt core-double shell nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM) and energy-dispersed spectrum (EDS). The Au@C@Pt core-double shell nanocomposite modified glassy carbon electrode (Au@C@Pt/GCE) exhibits good electrocatalytic activity towards H2O2 reduction at 0.0 V and can be used as H2O2 sensor. The sensor displays two wide linear ranges towards H2O2 detection. The one is 9.0 μM-1.86 mM with high sensitivity of 144.7 μA mM-1 cm-2, and the other is 1.86 mM-7.11 mM with sensitivity of 80.1 μA mM-1 cm-2. When signal to noise (S/N) is 3, the calculated detection limit (LOD) is 0.13 μM. Furthermore, the interference from the common interfering species such as glucose, ascorbic acid, dopamine and uric acid can be effectively avoided to H2O2 detection. Additionally, the H2O2 sensor also displays good stability and reproducibility.

  17. Increasing Stability and Activity of Core-Shell Catalysts by Preferential Segregation of Oxide on Edges and Vertexes: Oxygen Reduction on Ti-Au@Pt/C

    DOE PAGES

    Hu, J.; Wu, L.; Kuttiyiel, K.; ...

    2016-06-30

    We describe a new class of core-shell nanoparticle catalysts having edges and vertexes covered by refractory metal oxide that preferentially segregates onto these catalyst sites. The monolayer shell is deposited on the oxidefree core atoms. The oxide on edges and vertexes induces high catalyst’s stability and activity. The catalyst and synthesis are exemplified by fabrication of Au nanoparticles doped by Ti atoms that segregate as oxide onto low–coordination sites of edges and vertexes. Pt monolayer shell deposited on Au sites has the mass and specific activities for the oxygen reduction reaction about 13 and 5 times higher than those ofmore » commercial Pt/C catalysts. The durability tests show no activity loss after 10000 potential cycles from 0.6 to 1.0V. The superior activity and durability of the Ti-Au@Pt catalyst originate from protective Ti oxide located at the most dissolution-prone edge and vertex sites, and Au-supported active and stable Pt shell.« less

  18. Increasing Stability and Activity of Core-Shell Catalysts by Preferential Segregation of Oxide on Edges and Vertexes: Oxygen Reduction on Ti-Au@Pt/C

    SciTech Connect

    Hu, J.; Wu, L.; Kuttiyiel, K.; Goodman, K. R.; Zhang, C.; Zhu, Y.; Vukmirovic, M. B.; White, M. G.; Sasaki, K.; Adzic, R. R.

    2016-06-30

    We describe a new class of core-shell nanoparticle catalysts having edges and vertexes covered by refractory metal oxide that preferentially segregates onto these catalyst sites. The monolayer shell is deposited on the oxidefree core atoms. The oxide on edges and vertexes induces high catalyst’s stability and activity. The catalyst and synthesis are exemplified by fabrication of Au nanoparticles doped by Ti atoms that segregate as oxide onto low–coordination sites of edges and vertexes. Pt monolayer shell deposited on Au sites has the mass and specific activities for the oxygen reduction reaction about 13 and 5 times higher than those of commercial Pt/C catalysts. The durability tests show no activity loss after 10000 potential cycles from 0.6 to 1.0V. The superior activity and durability of the Ti-Au@Pt catalyst originate from protective Ti oxide located at the most dissolution-prone edge and vertex sites, and Au-supported active and stable Pt shell.

  19. High sensitive and selective sensing of hydrogen peroxide released from pheochromocytoma cells based on Pt-Au bimetallic nanoparticles electrodeposited on reduced graphene sheets.

    PubMed

    Yu, Guangxia; Wu, Weixiang; Pan, Xiaoqi; Zhao, Qiang; Wei, Xiaoyun; Lu, Qing

    2015-01-26

    In this study, a high sensitive and selective hydrogen peroxide (H2O2) sensor was successfully constructed with Pt-Au bimetallic nanoparticles (Pt-Au NPs)/reduced graphene sheets (rGSs) hybrid films. Various molar ratios of Au to Pt and different electrodeposition conditions were evaluated to control the morphology and electrocatalytic activity of the Pt-Au bimetallic nanoparticles. Upon optimal conditions, wide linear ranges from 1 µM to 1.78 mM and 1.78 mM to 16.8 mM were obtained, with a detection limit as low as 0.31 µM. Besides, due to the synergetic effects of the bimetallic NPs and rGSs, the amperometric H2O2 sensor could operate at a low potential of 0 V. Under this potential, not only common anodic interferences induced from ascorbic acid, uric acid and dopamine, but also the cathodic interference induced from endogenous O2 could be effectively avoided. Furthermore, with rat pheochromocytoma cells (PC 12) as model, the proposed sensor had been successfully used in the detection of H2O2 released from the cancer cells. This method with wide linear ranges and excellent selectivity can provide a promising alternative for H2O2 monitoring in vivo in the fields of physiology, pathology and diagnosis.

  20. Integrated logic gate for fluorescence turn-on detection of histidine and cysteine based on Ag/Au bimetallic nanoclusters-Cu²⁺ ensemble.

    PubMed

    Sun, Jian; Yang, Fan; Zhao, Dan; Chen, Chuanxia; Yang, Xiurong

    2015-04-01

    By means of employing 11-mercaptoundecanoic acid (11-MUA) as a reducing agent and protecting ligand, we present straightforward one-pot preparation of fluorescent Ag/Au bimetallic nanoclusters (namely AgAuNCs@11-MUA) from AgNO3 and HAuCl4 in alkaline aqueous solution at room temperature. It is found that the fluorescence of AgAuNCs@11-MUA has been selectively quenched by Cu(2+) ions, and the nonfluorescence off-state of the as-prepared AgAuNCs@11-MUA-Cu(2+) ensemble can be effectively switched on upon the addition of histidine and cysteine. By incorporating Ni(2+) ions and N-ethylmaleimide, this phenomenon is further exploited as an integrated logic gate and a specific fluorescence turn-on assay for selectively and sensitively sensing histidine and cysteine has been designed and established based on the original noncovalent AgAuNCs@11-MUA-Cu(2+) ensemble. Under the optimal conditions, histidine and cysteine can be detected in the concentration ranges of 0.25-9 and 0.25-7 μM; besides, the detection limits are found to be 87 and 111 nM (S/N = 3), respectively. Furthermore, we demonstrate that the proposed AgAuNCs@11-MUA-based fluorescent assay can be successfully utilized for biological fluids sample analysis.

  1. DNA origami based Au-Ag-core-shell nanoparticle dimers with single-molecule SERS sensitivity

    NASA Astrophysics Data System (ADS)

    Prinz, J.; Heck, C.; Ellerik, L.; Merk, V.; Bald, I.

    2016-03-01

    DNA origami nanostructures are a versatile tool to arrange metal nanostructures and other chemical entities with nanometer precision. In this way gold nanoparticle dimers with defined distance can be constructed, which can be exploited as novel substrates for surface enhanced Raman scattering (SERS). We have optimized the size, composition and arrangement of Au/Ag nanoparticles to create intense SERS hot spots, with Raman enhancement up to 1010, which is sufficient to detect single molecules by Raman scattering. This is demonstrated using single dye molecules (TAMRA and Cy3) placed into the center of the nanoparticle dimers. In conjunction with the DNA origami nanostructures novel SERS substrates are created, which can in the future be applied to the SERS analysis of more complex biomolecular targets, whose position and conformation within the SERS hot spot can be precisely controlled.DNA origami nanostructures are a versatile tool to arrange metal nanostructures and other chemical entities with nanometer precision. In this way gold nanoparticle dimers with defined distance can be constructed, which can be exploited as novel substrates for surface enhanced Raman scattering (SERS). We have optimized the size, composition and arrangement of Au/Ag nanoparticles to create intense SERS hot spots, with Raman enhancement up to 1010, which is sufficient to detect single molecules by Raman scattering. This is demonstrated using single dye molecules (TAMRA and Cy3) placed into the center of the nanoparticle dimers. In conjunction with the DNA origami nanostructures novel SERS substrates are created, which can in the future be applied to the SERS analysis of more complex biomolecular targets, whose position and conformation within the SERS hot spot can be precisely controlled. Electronic supplementary information (ESI) available: Additional information about materials and methods, designs of DNA origami templates, height profiles, additional SERS spectra, assignment of DNA

  2. Observation of spin Seebeck contribution to the transverse thermopower in Ni-Pt and MnBi-Au bulk nanocomposites.

    PubMed

    Boona, Stephen R; Vandaele, Koen; Boona, Isabel N; McComb, David W; Heremans, Joseph P

    2016-12-12

    Transverse thermoelectric devices produce electric fields perpendicular to an incident heat flux. Classically, this process is driven by the Nernst effect in bulk solids, wherein a magnetic field generates a Lorentz force on thermally excited electrons. The spin Seebeck effect also produces magnetization-dependent transverse electric fields. It is traditionally observed in thin metallic films deposited on electrically insulating ferromagnets, but the films' high resistance limits thermoelectric conversion efficiency. Combining Nernst and spin Seebeck effect in bulk materials would enable devices with simultaneously large transverse thermopower and low electrical resistance. Here we demonstrate experimentally that this is possible in composites of conducting ferromagnets (Ni or MnBi) containing metallic nanoparticles with strong spin-orbit interactions (Pt or Au). These materials display positive shifts in transverse thermopower attributable to inverse spin Hall electric fields in the nanoparticles. This more than doubles the power output of the Ni-Pt materials, establishing proof of principle that the spin Seebeck effect persists in bulk nanocomposites.

  3. Observation of spin Seebeck contribution to the transverse thermopower in Ni-Pt and MnBi-Au bulk nanocomposites

    NASA Astrophysics Data System (ADS)

    Boona, Stephen R.; Vandaele, Koen; Boona, Isabel N.; McComb, David W.; Heremans, Joseph P.

    2016-12-01

    Transverse thermoelectric devices produce electric fields perpendicular to an incident heat flux. Classically, this process is driven by the Nernst effect in bulk solids, wherein a magnetic field generates a Lorentz force on thermally excited electrons. The spin Seebeck effect also produces magnetization-dependent transverse electric fields. It is traditionally observed in thin metallic films deposited on electrically insulating ferromagnets, but the films' high resistance limits thermoelectric conversion efficiency. Combining Nernst and spin Seebeck effect in bulk materials would enable devices with simultaneously large transverse thermopower and low electrical resistance. Here we demonstrate experimentally that this is possible in composites of conducting ferromagnets (Ni or MnBi) containing metallic nanoparticles with strong spin-orbit interactions (Pt or Au). These materials display positive shifts in transverse thermopower attributable to inverse spin Hall electric fields in the nanoparticles. This more than doubles the power output of the Ni-Pt materials, establishing proof of principle that the spin Seebeck effect persists in bulk nanocomposites.

  4. Observation of spin Seebeck contribution to the transverse thermopower in Ni-Pt and MnBi-Au bulk nanocomposites

    PubMed Central

    Boona, Stephen R.; Vandaele, Koen; Boona, Isabel N.; McComb, David W.; Heremans, Joseph P.

    2016-01-01

    Transverse thermoelectric devices produce electric fields perpendicular to an incident heat flux. Classically, this process is driven by the Nernst effect in bulk solids, wherein a magnetic field generates a Lorentz force on thermally excited electrons. The spin Seebeck effect also produces magnetization-dependent transverse electric fields. It is traditionally observed in thin metallic films deposited on electrically insulating ferromagnets, but the films' high resistance limits thermoelectric conversion efficiency. Combining Nernst and spin Seebeck effect in bulk materials would enable devices with simultaneously large transverse thermopower and low electrical resistance. Here we demonstrate experimentally that this is possible in composites of conducting ferromagnets (Ni or MnBi) containing metallic nanoparticles with strong spin–orbit interactions (Pt or Au). These materials display positive shifts in transverse thermopower attributable to inverse spin Hall electric fields in the nanoparticles. This more than doubles the power output of the Ni-Pt materials, establishing proof of principle that the spin Seebeck effect persists in bulk nanocomposites. PMID:27941927

  5. Fabrication of electrodes with ultralow platinum loading by RF plasma processing of self-assembled arrays of Au@Pt nanoparticles

    NASA Astrophysics Data System (ADS)

    Banerjee, Ipshita; Kumaran, V.; Santhanam, Venugopal

    2016-07-01

    Conductive, carbon-free, electrocatalytically active, nanostructured electrodes with ultra-low platinum loading were fabricated using self-assembly of octadecanethiol-coated Au@Pt nanoparticles followed by RF plasma treatment. Bilayer arrays of Au@Pt nanoparticles with platinum loadings of 0.50, 1.04, 1.44, and 1.75 μg cm-2 (corresponding to 0.5, 1, 1.5 and 2 atomic layer coverage of platinum on nominally 5 nm gold core) were subjected to RF argon plasma treatment for various durations and their electrical conductivity, morphological evolution, and electrocatalytic activity characterized. Samples with monolayer and above platinum coverages exhibit maximum electrochemically active surface areas values of ˜100 m2/gpt and specific activities that are ˜4× to 6× of a reference platinum nanoparticle bilayer array. The underlying gold core influences the structural evolution of the samples upon RF plasma treatment and leads to the formation of highly active Pt(110) facets on the surface at an optimal plasma treatment duration, which also corresponds to the onset of a sharp decline in lateral sheet resistance. The sample having a two atom thick platinum coating has the highest total mass activity of 48 ± 3 m2/g(pt+au), corresponding to 44% Pt atom utilization, while also exhibiting enhanced CO tolerance as well as high methanol oxidation reaction and oxygen reduction reaction activity.

  6. Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment

    SciTech Connect

    Xiu, Fu-Rong; Qi, Yingying; Zhang, Fu-Shen

    2015-07-15

    Highlights: • We report a novel process for recovering Au, Ag, and Pd from waste PCBs. • The effect of SCWO on the leaching of Au, Ag, and Pd in waste PCBs was studied. • SCWO was highly efficient for enhancing the leaching of Au, Ag, and Pd. • The optimum leaching parameters for Au, Ag, and Pd in iodine–iodide were studied. - Abstract: Precious metals are the most attractive resources in waste printed circuit boards (PCBs) of mobile phones. In this work, an alternative process for recovering Au, Ag, and Pd from waste PCBs of mobile phones by supercritical water oxidation (SCWO) pre-treatment combined with iodine–iodide leaching process was developed. In the process, the waste PCBs of mobile phones were pre-treated in supercritical water, then a diluted hydrochloric acid leaching (HL) process was used to recovery the Cu, whose leaching efficiency was approximately 100%, finally the resulting residue was subjected to the iodine–iodide leaching process for recovering the Au, Ag, and Pd. Experimental results indicated that SCWO pre-treatment temperature, time, and pressure had significant influence on the Au, Ag, and Pd leaching from (SCWO + HL)-treated waste PCBs. The optimal SCWO pre-treatment conditions were 420 °C and 60 min for Au and Pd, and 410 °C and 30 min for Ag. The optimum dissolution parameters for Au, Pd, and Ag in (SCWO + HL)-treated PCBs with iodine–iodide system were leaching time of 120 min (90 min for Ag), iodine/iodide mole ratio of 1:5 (1:6 for Ag), solid-to-liquid ratio (S/L) of 1:10 g/mL (1:8 g/mL for Ag), and pH of 9, respectively. It is believed that the process developed in this study is environment friendly for the recovery of Au, Ag, and Pd from waste PCBs of mobile phones by SCWO pre-treatment combined with iodine–iodide leaching process.

  7. Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains

    PubMed Central

    Sabater, Carlos; Untiedt, Carlos

    2015-01-01

    Summary This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a ‘Berry force’. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose. PMID:26734525

  8. Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains.

    PubMed

    Sabater, Carlos; Untiedt, Carlos; van Ruitenbeek, Jan M

    2015-01-01

    This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a 'Berry force'. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose.

  9. Surface plasmon dispersion engineering via double-metallic AU/AG layers for nitride light-emitting diodes

    DOEpatents

    Tansu, Nelson; Zhao, Hongping; Zhang, Jing; Liu, Guangyu

    2014-04-01

    A double-metallic deposition process is used whereby adjacent layers of different metals are deposited on a substrate. The surface plasmon frequency of a base layer of a first metal is tuned by the surface plasmon frequency of a second layer of a second metal formed thereon. The amount of tuning is dependent upon the thickness of the metallic layers, and thus tuning can be achieved by varying the thicknesses of one or both of the metallic layers. In a preferred embodiment directed to enhanced LED technology in the green spectrum regime, a double-metallic Au/Ag layer comprising a base layer of gold (Au) followed by a second layer of silver (Ag) formed thereon is deposited on top of InGaN/GaN quantum wells (QWs) on a sapphire/GaN substrate.

  10. Fano effect in the angle-integrated valence band photoemission of the noble metals Cu, Ag, and Au

    SciTech Connect

    De Nadaie, C.; Brookes, N.B.; Minar, J.; Ebert, H.; Ghiringhelli, G.; Tagliaferri, A.

    2004-10-01

    Results of a combined experimental and theoretical investigation on the Fano-effect in the angle-integrated valence band photoemission of the noble metals are presented. In line with the fact that the Fano-effect is caused by the spin-orbit-coupling, the observed spin polarization of the photocurrent was found to be the more pronounced the higher the atomic number of the element investigated. The ratio of the normalized spin difference curves, however, agreed only for Cu and Ag with the ratio of the corresponding spin-orbit coupling strength parameters. The deviation from this expected behavior in the case of Au could be explained by the properties of individual d-p- and d-f-contributions to the total spin difference curves, that were found to be quite different for Au compared to Cu and Ag.

  11. Surface enhanced vibrational spectroscopy and first-principles study of L-cysteine adsorption on noble trimetallic Au/Pt@Rh clusters.

    PubMed

    Loganathan, B; Chandraboss, V L; Senthilvelan, S; Karthikeyan, B

    2015-09-07

    The Rh shell of the Au/Pt/Rh trimetallic nanoparticles induces a wide variety of interesting surface reactions by allowing the adsorption of amino acids like L-cysteine (L-Cys). We present a snapshot of theoretical and experimental investigation of L-Cys adsorption on the surface of noble trimetallic Au/Pt@Rh colloidal nanocomposites. Density functional theoretical (DFT) investigations of L-Cys interaction with the Rhodium (Rh) shell of a trimetallic Au/Pt@Rh cluster in terms of geometry, binding energy (E(B)), binding site, energy gap (E(g)), electronic and spectral properties have been performed. L-Cys establishes a strong interaction with the Rh shell. It binds to Rh by the S1-site, which makes a stable L-Cys-Rh surface complex. DFT can be taken as a valuable tool to assign the vibrational spectra of the adsorption of L-Cys on trimetallic Au/Pt@Rh colloidal nanocomposites and mono-metallic Rh nanoparticles. Surface-enhanced infrared spectroscopy (SEIRS) with L-Cys on a Rh6 cluster surface has been simulated for the first time. Experimental information on the L-Cys-Rh surface complex is included to examine the interaction. The experimental spectral observations are in good agreement with the simulated DFT results. Characterization of the synthesized trimetallic Au/Pt@Rh colloidal nanocomposites has been done by high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern, energy dispersive X-ray (EDX) spectroscopy, dynamic light scattering (DLS) measurements, zeta potential, zeta deviation analysis and UV-visible (UV-Vis) spectroscopic studies.

  12. Sensitive determination of dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles.

    PubMed

    Mahshid, Sara; Li, Chengcheng; Mahshid, Sahar Sadat; Askari, Masoud; Dolati, Abolghasem; Yang, Lixia; Luo, Shenglian; Cai, Qingyun

    2011-06-07

    A simple modified TiO(2) nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO(2) nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO(2) NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case, electro-oxidation peak currents of dopamine were linearly related to accumulated concentration over a wide concentration range of 5.0 × 10(-8) to 3.0 × 10(-5) M. However in the same range of dopamine concentration, the sensitivity had a significant loss at Pt/Pd/TiO(2) NTs electrode, suggesting the necessity for Au nanoparticles in modified electrode. The limit of the detection was determined as 3 × 10(-8) M for dopamine at signal-to-noise ratio equal to 3. Furthermore, the Au/Pt/Pd/TiO(2) NTs modified electrode was able to distinguish the oxidation response of dopamine, uric acid and ascorbic acid in mixture solution of different acidity. It was shown that the modified electrode possessed a very good reproducibility and long-term stability. The method was also successfully applied for determination of DA in human urine samples with satisfactory results.

  13. Enzymatic plasmonic engineering of Ag/Au bimetallic nanoshells and their use for sensitive optical glucose sensing.

    PubMed

    He, Haili; Xu, Xiaolong; Wu, Haoxi; Jin, Yongdong

    2012-04-03

    Enzyme works for plasmonic nanostructure: an interesting enzyme-responsive hybrid Ag/Au-GOx bimetallic nanoshell (NS) system is reported, in which control over the enzyme reaction of glucose oxidase (GOx) can automatically fine-tune the morphology (from complete NS to porous NS) and optical properties of the hybrid nanostructure. The phenomenon is further exploited as a new platform for sensitive optical glucose sensing.

  14. Uniform and controllable preparation of Au-Ag core-shell nanorods using anisotropic silver shell formation on gold nanorods.

    PubMed

    Okuno, Yoshifumi; Nishioka, Koji; Kiya, Ayaka; Nakashima, Naotoshi; Ishibashi, Ayumu; Niidome, Yasuro

    2010-08-01

    Anisotropic and controllable silver shell formation on gold nanorods was realized in a micellar solution of hexadecytrimethylammonium chloride. Uniformity of the anisotropic Au-Ag core-shell particles contributes separation of four extinction bands. The ability to manipulate the shapes and sizes of these nanoparticles offers a wide-range control of the surface extinction from the visible to the near infrared regions (450-800 nm).

  15. Plasmon coupling-enhanced two-photon photoluminescence of Au@Ag core-shell nanoparticles and applications in the nuclease assay

    NASA Astrophysics Data System (ADS)

    Yuan, Peiyan; Ma, Rizhao; Gao, Nengyue; Garai, Monalisa; Xu, Qing-Hua

    2015-05-01

    Au and Ag nanoparticles (NPs) have been known to display significantly enhanced two-photon photoluminescence (2PPL) upon the formation of nanoparticle aggregates. The enhancement effect of the core-shell nanoparticles has not been explored so far. Here we have prepared Au@Ag bimetallic core-shell nanoparticles with different thicknesses (1.1, 2.1, 3.5, 4.5, and 5.5 nm) of silver coating on 19 nm Au NPs to investigate the composition effects on plasmon coupling-enhanced 2PPL. A maximum 2PPL enhancement factor (IcoupledNPs/IisolatedNPs) of up to 840-fold was obtained for Au@Ag NPs with ~3.5 nm Ag nanoshells. These Au@Ag NPs were subsequently utilized in two-photon detection of S1 nuclease as a photoluminescence turn on probe. This method displayed high sensitivity with the limit of detection of 1.4 × 10-6 U μL-1 and an excellent selectivity.Au and Ag nanoparticles (NPs) have been known to display significantly enhanced two-photon photoluminescence (2PPL) upon the formation of nanoparticle aggregates. The enhancement effect of the core-shell nanoparticles has not been explored so far. Here we have prepared Au@Ag bimetallic core-shell nanoparticles with different thicknesses (1.1, 2.1, 3.5, 4.5, and 5.5 nm) of silver coating on 19 nm Au NPs to investigate the composition effects on plasmon coupling-enhanced 2PPL. A maximum 2PPL enhancement factor (IcoupledNPs/IisolatedNPs) of up to 840-fold was obtained for Au@Ag NPs with ~3.5 nm Ag nanoshells. These Au@Ag NPs were subsequently utilized in two-photon detection of S1 nuclease as a photoluminescence turn on probe. This method displayed high sensitivity with the limit of detection of 1.4 × 10-6 U μL-1 and an excellent selectivity. Electronic supplementary information (ESI) available: TEM images, histograms of the sizes of Au@Ag NPs; extinction, 2PPL spectra of aggregated NPs, cysteamine, ssDNA and S1 nuclease; 2-photon action cross section of aggregated NPs; lengths of ssDNA and [NaCl] effect; excitation power

  16. Formation of recent Pb-Ag-Au mineralization by potential sub-surface microbial activity

    NASA Astrophysics Data System (ADS)

    Tornos, Fernando; Velasco, Francisco; Menor-Salván, César; Delgado, Antonio; Slack, John F.; Escobar, Juan Manuel

    2014-08-01

    Las Cruces is a base-metal deposit in the Iberian Pyrite Belt, one of the world’s best-known ore provinces. Here we report the occurrence of major Pb-Ag-Au mineralization resulting from recent sub-surface replacement of supergene oxyhydroxides by carbonate and sulphide minerals. This is probably the largest documented occurrence of recent microbial activity producing an ore assemblage previously unknown in supergene mineralizing environments. The presence of microbial features in the sulphides suggests that these may be the first-described natural bacteriomorphs of galena. The low δ13C values of the carbonate minerals indicate formation by deep anaerobic microbial processes. Sulphur isotope values of sulphides are interpreted here as reflecting microbial reduction in a system impoverished in sulphate. We suggest that biogenic activity has produced around 3.1 × 109 moles of reduced sulphur and 1010 moles of CO2, promoting the formation of ca. 1.19 Mt of carbonates, 114,000 t of galena, 638 t of silver sulphides and 6.5 t of gold.

  17. Formation of recent Pb-Ag-Au mineralization by potential sub-surface microbial activity.

    PubMed

    Tornos, Fernando; Velasco, Francisco; Menor-Salván, César; Delgado, Antonio; Slack, John F; Escobar, Juan Manuel

    2014-08-06

    Las Cruces is a base-metal deposit in the Iberian Pyrite Belt, one of the world's best-known ore provinces. Here we report the occurrence of major Pb-Ag-Au mineralization resulting from recent sub-surface replacement of supergene oxyhydroxides by carbonate and sulphide minerals. This is probably the largest documented occurrence of recent microbial activity producing an ore assemblage previously unknown in supergene mineralizing environments. The presence of microbial features in the sulphides suggests that these may be the first-described natural bacteriomorphs of galena. The low δ(13)C values of the carbonate minerals indicate formation by deep anaerobic microbial processes. Sulphur isotope values of sulphides are interpreted here as reflecting microbial reduction in a system impoverished in sulphate. We suggest that biogenic activity has produced around 3.1 × 10(9) moles of reduced sulphur and 10(10) moles of CO2, promoting the formation of ca. 1.19 Mt of carbonates, 114,000 t of galena, 638 t of silver sulphides and 6.5 t of gold.

  18. Electronic structure and conductivity of nanocomposite metal (Au,Ag,Cu,Mo)-containing amorphous carbon films

    SciTech Connect

    Endrino, Jose L.; Horwat, David; Gago, Raul; Andersson, Joakim; Liu, Y.S.; Guo, Jinghua; Anders, Andre

    2008-05-14

    In this work, we study the influence of the incorporation of different metals (Me = Au, Ag, Cu, Mo) on the electronic structure of amorphous carbon (a-C:Me) films. The films were produced at room temperature using a novel pulsed dual-cathode arc deposition technique. Compositional analysis was performed with secondary neutral mass spectroscopy whereas X-ray diffraction was used to identify the formation of metal nanoclusters in the carbon matrix. The metal content incorporated in the nanocomposite films induces a drastic increase in the conductivity, in parallel with a decrease in the band gap corrected from Urbach energy. The electronic structure as a function of the Me content has been monitored by x-ray absorption near edge structure (XANES) at the C K-edge. XANES showed that the C host matrix has a dominant graphitic character and that it is not affected significantly by the incorporation of metal impurities, except for the case of Mo, where the modifications in the lineshape spectra indicated the formation of a carbide phase. Subtle modifications of the spectral lineshape are discussed in terms of nanocomposite formation.

  19. In vitro corrosion of dental Au-based casting alloys in polyvinylpyrrolidone-iodine solution.

    PubMed

    Takasusuki, Norio; Ida, Yusuke; Hirose, Yukito; Ochi, Morio; Endo, Kazuhiko

    2013-01-01

    The corrosion and tarnish behaviors of two Au-based casting alloys (ISO type 1 and type 4 Au alloys) and their constituent pure metals, Au, Ag, Cu, Pt, and Pd in a polyvinylpyrrolidone-iodine solution were examined. The two Au alloys actively corroded, and the main anodic reaction for both was dissolution of Au as AuI₂(-). The amount of Au released from the ISO type 1 Au alloy was significantly larger than that from the ISO type 4 Au alloy (P<0.05). Visible light spectrophotometry revealed that the type 1 alloy exhibited higher susceptibility to tarnishing than the type 4 alloy. The corrosion forms of the two Au alloys were found to be completely different, i.e., the type 1 alloy exhibited the corrosion attack over the entire exposed surface with a little irregularity whereas the type 4 alloy exhibited typical intergranular corrosion, which was caused by local cells produced by segregation of Pd and Pt.

  20. Probing the mechanism of plasma protein adsorption on Au and Ag nanoparticles with FT-IR spectroscopy

    NASA Astrophysics Data System (ADS)

    Wang, Mengmeng; Fu, Cuiping; Liu, Xingang; Lin, Zhipeng; Yang, Ning; Yu, Shaoning

    2015-09-01

    Protein-nanoparticle interactions are important in biomedical applications of nanoparticles and for growing biosafety concerns about nanomaterials. In this study, the interactions of four plasma proteins, human serum albumin (HSA), myoglobin (MB), hemoglobin (HB), and trypsin (TRP), with Au and Ag nanoparticles were investigated by FT-IR spectroscopy. The secondary structure of thio-proteins changed with time during incubation with Au and Ag nanoparticles, but the secondary structures of non-thio-proteins remained unchanged. The incubation time for structural changes depended on the sulfur-metal bond energy; the stronger the sulfur-metal energy, the less the time needed. H/D exchange experiments revealed that protein-NP complexes with thio-proteins were less dynamic than free proteins. No measurable dynamic differences were found between free non-thio-proteins and the protein-Au (or Ag) nanoparticle complex. Therefore, the impact of covalent bonds on the protein structure is greater than that of the electrostatic force.

  1. The enhancing of Au-Ag-Te content in tellurium-bearing ore mineral by bio-oxidation-leaching

    NASA Astrophysics Data System (ADS)

    Kim, PyeongMan; Kim, HyunSoo; Myung, EunJi; Kim, YoonJung; Lee, YongBum; Park*, CheonYoung

    2015-04-01

    The purpose of this study is to enhance the content of valuable metals such as Au-Ag-Te in tellurium-bearing minerals by bio-oxidation-leaching. It was confirmed that pyrite, chalcopyrite, sphalerite and galena were produced together with tellurium-bearing minerals including hessite, sylvanite and tellurobismuthite from ore minerals and concentrates through microscopic observation and SEM/EDS analysis. In a bio-oxidation-leaching experiment, with regard to Au, Ag, Te, Cu and Fe, the changes in the amount of leaching and the content of leaching residues were compared and analyzed with each other depending on the adaptation of an indigenous microbe identified as Acidithiobacillus ferrooxidans. As a result of the experiment, the Au-Ag-Te content in tellurium-bearing ore mineral was enhanced in the order of physical oxidation leaching, physical/non-adaptive bio-oxidation-leaching and physical/adaptive biological leaching. It suggests that the bio-oxidation-leaching using microbes adapted in tellurium-bearing ore mineral can be used as a pre-treatment and a main process in a recovery process of valuable metals. "This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education(NRF-2013R1A1A2004898)"

  2. DNA biosensor-based on fluorescence detection of E. coli O157:H7 by Au@Ag nanorods.

    PubMed

    Sun, Jiadi; Ji, Jian; Sun, Yanqing; Abdalhai, Mandour H; Zhang, Yinzhi; Sun, Xiulan

    2015-08-15

    A novel DNA sensor for the detection of the Escherichia coli O157:H7 (E. coli O157:H7) eaeA gene was constructed using surface enhanced fluorescence (SEF). The spacing distance dependence nature of Au@Ag nanorods surface enhanced fluorescence was investigated when the cy3-labled single strand DNA(ssDNA) and the stem-loop DNA probe modified on the nanorods was co-hybridized. The result revealed that the fluorescence intensity reached the maximum value with the spacing distance of about 10nm between cy3 and the Au@Ag nanorods surface. Based on this result, a fluorescence "ON/OFF" switch for detecting the eaeA gene of E. coli O157:H7 was constructed. Under optimal conditions, the DNA sensor produced a linear range from 10(-17) to 10(-11) M with a correlation coefficient of 0.9947 and a detection limit of 3.33×10(-18) M, and was also found to be specific in targeting eaeA. The DNA sensor demonstrated a new strategy of combining eaeA recognition and Au@Ag nanorods for fluorescence signal enhancement, and increased sensitivity in the detection of bacterial specific genes.

  3. Equilibrium geometries, stabilities, and electronic properties of the bimetallic M2-doped Au(n) (M = Ag, Cu; n = 1-10) clusters: comparison with pure gold clusters.

    PubMed

    Zhao, Ya-Ru; Kuang, Xiao-Yu; Zheng, Bao-Bing; Li, Yan-Fang; Wang, Su-Juan

    2011-02-10

    The density functional method with relativistic effective core potential has been employed to investigate systematically the geometrical structures, relative stabilities, growth-pattern behaviors, and electronic properties of small bimetallic M(2)Au(n) (M = Ag, Cu; n = 1-10) and pure gold Au(n) (n ≤ 12) clusters. The optimized geometries reveal that M(2) substituted Au(n+2) clusters and one Au atom capped M(2)Au(n-1) structures are dominant growth patterns of the stable alloyed M(2)Au(n) clusters. The calculated averaged atomic binding energies, fragmentation energies, and the second-order difference of energies as a function of the cluster size exhibit a pronounced even-odd alternation phenomenon. The analytic results exhibit that the planar structure Ag(2)Au(4) and Cu(2)Au(2) isomers are the most stable geometries of Ag(2)Au(n) and Cu(2)Au(n) clusters, respectively. In addition, the HOMO-LUMO gaps, charge transfers, chemical hardnesses and polarizabilities have been analyzed and compared further.

  4. Ab initio study of MXe{sub n}{sup +} (M=Cu, Ag, and Au; n=1,2)

    SciTech Connect

    Li Xinying; Cao Xue

    2008-02-15

    The equilibrium geometries, vibrational frequencies, dissociation energies, and populations of the title species were studied at Hartree-Fock (HF), second-order Moeller-Plesset (MP2), and coupled-cluster singles-doubles (triples) [CCSD(T)] levels. The electron correlation effects and relativistic effects on the geometry and stability were investigated at the CCSD(T) level. Both effects stabilize title species. The populations analyses show that M-Xe bonding is dominated by electrostatic interactions and the best theoretical estimate of the dissociation energies are 1.104 and 2.260 eV for AuXe{sup +} and AuXe{sub 2}{sup +}, respectively. The Cu and Ag are weakly bonded to Xe compared to Au.

  5. Interaction of Au, Ag, and Bi ions with Ba2YCu3O(7-y) - Implications for superconductor applications

    NASA Technical Reports Server (NTRS)

    Hepp, A. F.; Gaier, J. R.; Pouch, J. J.; Hambourger, P. D.

    1988-01-01

    Results are presented on the reactions of Au, Ag, and Bi ions with Ba2YCu3O(7-y) oxides and on the properties of the resultant materials. The results indicate that Au(3+) structural chemistry makes gold an excellent candidate for multiphase structures of the Ba2Y(Cu/1-x/Au/x/)3O(7-y)-type substituted superconductors. Silver is structurally and chemically compatible with the perovskite structure, but when it forms a second phase, it does so without the destruction of the superconducting phase, making silver a useful metal for metal/ceramic applications. On the other hand, bismuth was shown to degrade Tc phase or to form other phases, indicating that it may not be useful in applications with rare-earth-based superconductors.

  6. Synthesis of Ag or Pt nanoparticle-deposited TiO2 nanorods for the highly efficient photoreduction of CO2 to CH4

    NASA Astrophysics Data System (ADS)

    Wang, Qingli; Dong, Peimei; Huang, Zhengfeng; Zhang, Xiwen

    2015-10-01

    Ag or Pt-deposited TiO2 nanocomposites were prepared by a simple method, in which oriented TiO2 nanorods were synthesized by a hydrothermal method and a noble metal (Ag or Pt) was deposited on TiO2 by photocatalytic reduction under UV irradiation. The oriented TiO2 nanorods with Ag or Pt nanoparticles (<20 nm) exhibited high CO2 photoreduction efficiency, with CH4 yield rates up to 16.0 ppm/g h and 10.8 ppm/g h, respectively, considerably higher than that of the pure TiO2 nanorods (4.2 ppm/g h). The improvement in the CH4 yield was attributed to the formation of a Schottky barrier and surface plasmon resonance.

  7. Recording-media-related morphology and magnetic properties of crystalline CoPt{sub 3} and CoPt{sub 3}-Au core-shell nanoparticles synthesized via reverse microemulsion

    SciTech Connect

    Bahmanrokh, Ghazaleh Hashim, Mansor; Matori, Khamirul Amin; Kanagesan, Samikannu; Sabbaghizadeh, Rahim; Ezzad Shafie, Mohd Shamsul; Navasery, Manizheh; Soltani, Nayereh; Vaziri, Parisa

    2014-09-07

    A comparative experimental study of the magnetic properties of CoPt{sub 3} and CoPt{sub 3}/Au nanoparticles as well as a detailed study of the structural properties of the samples by X-ray diffraction, Transmission electron microscopy, and vibrating sample magnetometer is presented in this work. In addition, the effect of particle size on the structure and magnetic properties of nanoparticles prepared by microemulsion is studied. The correlation between particle size, crystallinity, and magnetization was studied as well. CoPt nanoparticles have been studied intensively over the last decade because of their increased magnetic anisotropy in the ordered phase that can be interesting for high density magnetic recording. A significant high coercivity for as-prepared CoPt{sub 3} and CoPt{sub 3}-Au nanoparticles was obtained at room temperature and enhanced after annealing. The focused aim of our study is to obtain high coercivity at room temperature that follows the Curie-Weiss law. This indicates an interacting system in which the nanoparticles behave like single domain ferromagnetic materials in the particle size range of 8 to 35 nm. In addition, the interaction increases by cooling the samples to low temperature around 15 K. Temperature dependence 1/M graph was obtained to investigate the behavior of nanoparticles at low temperature and shows the best fit with Curie-Weis mode.

  8. Synthesis and electrocatalytic effect of Ag@Pt core-shell nanoparticles supported on reduced graphene oxide for sensitive and simple label-free electrochemical aptasensor.

    PubMed

    Mazloum-Ardakani, Mohammad; Hosseinzadeh, Laleh; Taleat, Zahra

    2015-12-15

    Bimetallic Ag@Pt core-shell nanoparticles supported on reduced graphene oxide nanosheets (Ag@Pt-GRs) was synthesized and used as novel desirable sensor platform and electrocatalyst for catechol as probe in aptasensor. Gold screen-printed electrodes modified with Ag@Pt-GRs and applied to advance enzyme-free and label-free electrochemical aptasensor for detection of protein biomarker tumor necrosis factor-alpha (TNF-α). The morphology of the Ag@Pt-GRs could be characterized by transmission electron microscopy, X-ray diffraction and UV-vis spectra. The results showed that these nanocomposite exhibited attractive electrocatalytic activity and also yielded large surface area, which improve the amount of immobilized TNF-α aptamer. Due to the excellent electrocatalytic activity of Ag@Pt-GRs towards the oxidation of catechol, determination of TNF-α antigen was based on its obstruction to the electrocatalytic oxidation of catechol by Ag@Pt-GRs after binding to the surface of electrode through interaction with the aptamer. The calibration curve was obtained by differential pulse voltammetry and square wave voltammetry. Under optimum conditions, the results demonstrated that this electrochemical aptasensor possessed a dynamic range from 0.0 pg/mL to 60 pg/mL with a low detection limit of 2.07 pg/mL for TNF-α. The analytical usefulness of the aptasensor was finally demonstrated analyzing serum samples. The simple fabrication method, high sensitivity, specificity, good reproducibility and stability as well as acceptable accuracy for TNF-α detection in human serum samples are the main advantages of this aptasensor, which might have broad applications in protein diagnostics and bioassay.

  9. Desulfinylation of Ag(I) Sulfinyl Mesoionic Carbenes: Preparation of C-Unsubstituted Au(I)-1,2,3-Triazole Carbene Complexes.

    PubMed

    Frutos, María; Ortuño, Manuel A; Lledos, Agustí; Viso, Alma; Fernández de la Pradilla, Roberto; de la Torre, María C; Sierra, Miguel A; Gornitzka, Heinz; Hemmert, Catherine

    2017-02-17

    New and well-characterized Ag-bis(1,2,3-triazolylidene) complexes having enantiopure (S)-sulfoxides upon sequential treatment with alcohols and Au(I) form separable mixtures of regioisomeric C-unsubstituted Au-1,2,3-triazolylidene complexes. Mechanistic studies and DFT calculations support a desulfinylation process for in situ generated free triazolylidene salts.

  10. Fabrication of sensitive enzymatic biosensor based on multi-layered reduced graphene oxide added PtAu nanoparticles-modified hybrid electrode

    PubMed Central

    Hossain, Md Faruk; Park, Jae Y.

    2017-01-01

    A highly sensitive amperometric glucose sensor was developed by immobilization of glucose oxidase (GOx) onto multi-layer reduced graphene oxide (MRGO) sheets decorated with platinum and gold flower-like nanoparticles (PtAuNPs) modified Au substrate electrode. The fabricated MRGO/PtAuNPs modified hybrid electrode demonstrated high electrocatalytic activities toward oxidation of H2O2, to which it had a wide linear response that ranged from 0.5 to 8 mM (R2 = 0.997), and high sensitivity of 506.25 μA/mMcm2. Furthermore, glucose oxidase-chitosan composite and cationic polydiallyldimethylammonium chloride (PDDA) were assembled by a casting method on the surface of MRGO/PtAuNPs modified electrode. This as-fabricated hybrid biosensor electrode exhibited high electrocatalytic activity for the detection of glucose in PBS. It demonstrated good analytical properties in terms of a low detection limit of 1 μM (signal-to-noise ratio of 3), short response time (3 s), high sensitivity (17.85 μA/mMcm2), and a wide linear range (0.01–8 mM) for glucose sensing. These results reveal that the newly developed sensing electrode offers great promise for new type enzymatic biosensor applications. PMID:28333943

  11. Schottky or Ohmic metal-semiconductor contact: influence on photocatalytic efficiency of Ag/ZnO and Pt/ZnO model systems.

    PubMed

    Yan, Fengpo; Wang, Yonghao; Zhang, Jiye; Lin, Zhang; Zheng, Jinsheng; Huang, Feng

    2014-01-01

    The relationship between the contact type in metal-semiconductor junctions and their photocatalytic efficiencies is investigated. Two metal-semiconductor junctions, silver on zinc oxide (Ag/ZnO) and platinum on zinc oxide (Pt/ZnO) serve as model system for Ohmic and Schottky metal-semiconductor contact, respectively. Ag/ZnO, with Ohmic contact, exhibits a higher photocatalytic efficiency than Pt/ZnO, with Schottky contact. The direction of electric fields within the semiconductor is found to play a crucial role in the separation of photogenerated charges, and thus strongly influences the photocatalytic efficiency.

  12. Effects of single atom doping on the ultrafast electron dynamics of M1Au24(SR)18 (M = Pd, Pt) nanoclusters

    DOE PAGES

    Zhou, Meng; Qian, Huifeng; Sfeir, Matthew Y.; ...

    2016-02-29

    Atomically precise, doped metal clusters are receiving wide research interest due to their synergistic properties dependent on the metal composition. To understand the electronic properties of doped clusters, it is highly desirable to probe the excited state behavior. Here, we report the ultrafast relaxation dynamics of doped M1@Au24(SR)18 (M = Pd, Pt; R = CH2CH2Ph) clusters using femtosecond visible and near infrared transient absorption spectroscopy. Three relaxation components are identified for both mono-doped clusters: (1) sub-picosecond relaxation within the M1Au12 core states; (2) core to shell relaxation in a few picoseconds; and (3) relaxation back to the ground state inmore » more than one nanosecond. Despite similar relaxation pathways for the two doped nanoclusters, the coupling between the metal core and surface ligands is accelerated by over 30% in the case of the Pt dopant compared with the Pd dopant. Compared to Pd doping, the case of Pt doping leads to much more drastic changes in the steady state and transient absorption of the clusters, which indicates that the 5d orbitals of the Pt atom are more strongly mixed with Au 5d and 6s orbitals than the 4d orbitals of the Pd dopant. These results demonstrate that a single foreign atom can lead to entirely different excited state spectral features of the whole cluster compared to the parent Au25(SR)18 cluster. As a result, the detailed excited state dynamics of atomically precise Pd/Pt doped gold clusters help further understand their properties and benefit the development of energy-related applications.« less

  13. One-Pot Polyol Synthesis of Pt/CeO2 and Au/CeO2 Nanopowders as Catalysts for CO Oxidation.

    PubMed

    Pilger, Frank; Testino, Andrea; Lucchini, Mattia Alberto; Kambolis, Anastasios; Tarik, Mohammed; El Kazzi, Mario; Arroyo, Yadira; Rossell, Marta D; Ludwig, Christian

    2015-05-01

    The facile one-pot synthesis of CeO2-based catalysts has been developed to prepare a relatively large amount of nanopowders with relevant catalytic activity towards CO oxidation. The method consists of a two-steps process carried out in ethylene glycol: in the first step, 5 nm well-crystallized pure CeO2 is prepared. In a subsequent second step, a salt of a noble metal is added to the CeO2 suspension and the deposition of the noble metal on the nanocrystalline CeO2 is induced by heating. Two catalysts were prepared: Pt/CeO2 and Au/CeO2. The as-prepared catalysts, the thermally treated catalysts, as well as the pure CeO2, are characterized by XRD, TGA, XPS, FTIR, HR-TEM, STEM, particle size distribution, and N2-physisorption. In spite of the identical preparation protocol, Au and Pt behave in a completely different way: Au forms rather large particles, most of them with triangular shape, easily identifiable and dispersed in the CeO2 matrix. In contrast, Pt was not identified as isolated particles. The high resolution X-ray diffraction carried out on the Pt/CeO2 thermally treated sample (500 degrees C for 1 h) shows a significant CeO2 lattice shrinkage, which can be interpreted as an at least partial incorporation of Pt into the CeO2 crystal lattice. Moreover, only Pt2+ and Pt4+ species were identified by XPS. In literature, the incorporation of Pt into the CeO2 lattice is supported by first-principle calculations and experimentally demonstrated only by combustion synthesis methods. To the best of our knowledge this is the first report where ionically dispersed Pt into the CeO2 lattice is obtained via a liquid synthesis method. The thermally treated Pt/CeO2 sample revealed good activity with 50% CO conversion at almost room temperature.

  14. Nanoengineering the antibacterial activity of biosynthesized nanoparticles of TiO2, Ag, and Au and their nanohybrids with Portobello mushroom spore (PMS) (TiOx/PMS, Ag/PMS and Au/PMS) and making them optically self-indicating

    NASA Astrophysics Data System (ADS)

    Jaffer Al-Timimi, Iman A.; Sermon, Paul A.; Burghal, Ahmed A.; Salih, Afrodet A.; Alrubaya, Inaam M. N.

    2016-09-01

    Results show that nanoparticles (NPs) can be biosynthesized at room temperature on the reductive and chelating surfaces of Portobello mushroom spores (PMS). Using this green approach TiOx, Ag, Au, Ag-TiOx and Au-TiOx NPs have been prepared. These were characterized by TEM, SIMS and μFTIR-FTIR. TiOx/PMS, Ag-TiOx/PMS, Au-TiOx/PMS and Ag/PMS were active in bacterial inhibition towards Eschericia coli and Staphylococcus aureus, but Au/PMS was not active (suggesting a strong Au-PMS interaction). TiOx/PMS, Ag/PMS and Ag-TiOx/PMS were equally active in an antibacterial and an antifungal sense when tested against Asperillus and Candide. All samples (except Ag-TiOx/PMS and Au-TiOx/PMS) showed an interesting interaction with DNA. We report on the process of fine-tuning these antibacterial properties, progress on making these nanomaterials optically self-indicating and movement towards optical control of their antibacterial activity. Au-TiOx/PMS shows a surface plasmon resonance (SPR) with a maximum at 518 nm that might be useful in following its anti-bacterial properties (i.e. making the bionanomaterial self-indicating). The future of such green bio-nanomaterials is strong.

  15. Investigation of thiourea activated polyglutaraldehyde with bound Ag(I) or Pt(II) as an alternative to avidin for immobilizing biotin conjugates.

    PubMed

    Ki