Science.gov

Sample records for ag cu pb

  1. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOEpatents

    Anderson, I.E.; Yost, F.G.; Smith, J.F.; Miller, C.M.; Terpstra, R.L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217 C and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid ``mushy`` zone) relative to the eutectic melting temperature (e.g. up to 15 C above the eutectic melting temperature). 5 figs.

  2. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOEpatents

    Anderson, Iver E.; Yost, Frederick G.; Smith, John F.; Miller, Chad M.; Terpstra, Robert L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217.degree. C. and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid "mushy" zone) relative to the eutectic melting temperature (e.g. up to 15.degree. C. above the eutectic melting temperature).

  3. The interaction of Ag with Bi-Pb-Sr-Ca-Cu-O superconductor

    NASA Astrophysics Data System (ADS)

    Dou, S. X.; Song, K. H.; Liu, H. K.; Sorrell, C. C.; Apperley, M. H.; Gouch, A. J.; Savvides, N.; Hensley, D. W.

    1989-10-01

    Bi-Pb-Sr-Ca-Cu-O superconductor compounds have been doped with up to 30 wt% Ag, sintered under variable oxygen partial pressure, and characterised in terms of the electrical and crystallographic behaviour. In contrast to previous reports that claim that Ag is the only metal non-poisoning to the superconductivity of Bi-Sr-Ca-Cu-O (BSCCO), it has been found that Ag additions to Bi-Pb-Sr-Ca-Cu-O depress Tc and Jc drastically and cause a large decrease in lattice parameters when samples are treated in air or pure oxygen. However, the lattice parameters, Tc and Jc remain unaffected by Ag additions when samples are heat treated in 0.030-0.067 atm oxygen. It is clear that the Ag reacts with and destabilises the superconducting phase when the samples are treated in air or pure oxygen while, when the samples are heat treated in low oxygen partial pressures, the Ag remains as an isolated inert metal phase that improves the weak links between the grains. This discovery clearly shows the feasibility of Ag-clad superconductor wire. For Ag-clad superconductor tape of 0.1 mm 2 cross sectional area heat treated in air, Jc was measured to be 54 A/cm 2. The same specimen sintered in 0.067 atm oxygen showed that the Jc increased to 2078 A/cm 2.

  4. Development of a new Pb-free solder: Sn-Ag-Cu

    SciTech Connect

    Miller, C.M.

    1995-02-10

    With the ever increasing awareness of the toxicity of Pb, significant pressure has been put on the electronics industry to get the Pb out of solder. This work pertains to the development and characterization of an alloy which is Pb-free, yet retains the proven positive qualities of current Sn-Pb solders while enhancing the shortcomings of Sn-Pb solder. The solder studied is the Sn-4.7Ag-1.7Cu wt% alloy. By utilizing a variety of experimental techniques the alloy was characterized. The alloy has a melting temperature of 217{degrees}C and exhibits eutectic melting behavior. The solder was examined by subjecting to different annealing schedules and examining the microstructural stability. The effect of cooling rate on the microstructure of the solder was also examined. Overall, this solder alloy shows great promise as a viable alternative to Pb-bearing solders and, as such, an application for a patent has been filed.

  5. Possible Mesozoic age of Ellenville Zn-Pb-Cu(Ag) deposit, Shawangunk Mountains, New York

    USGS Publications Warehouse

    Friedman, J.D.; Conrad, J.E.; McKee, E.H.; Mutschler, F.E.; Zartman, R.E.

    1994-01-01

    Ore textures, epithermal open-space filling of Permian structures of the Alleghanian orogeny, and largely postorogenic mineralization of the Ellenville, New York, composite Zn-Pb-Cu(Ag) vein system, provide permissive evidence for post-Permian mineralization. Isochron ages determined by 40Ar/39Ar laser-fusion techniques for K-bearing liquid inclusions in main-stage quartz from the Ellenville deposit additionally suggest a Mesozoic time of mineralization, associated with extensional formation of the Newark basin. The best 40Ar/39Ar total-fusion age range is 165 ?? 30 to 193 ?? 35 Ma. The Mesozoic 40Ar/39Ar age agrees with that of many other dated northern Appalachian Zn-Pb-Cu(Ag) deposits with near-matching lead isotope ratios, and adds new evidence of Jurassic tectonism and mineralization as an overprint to Late Paleozoic tectonism at least as far north as Ellenville (lat. 41??43???N). ?? 1994 Springer-Verlag.

  6. Pb isotopic constraints on the formation of the Dikulushi Cu-Pb-Zn-Ag mineralisation, Kundelungu Plateau (Democratic Republic of Congo)

    NASA Astrophysics Data System (ADS)

    Haest, Maarten; Schneider, Jens; Cloquet, Christophe; Latruwe, Kris; Vanhaecke, Frank; Muchez, Philippe

    2010-04-01

    Base metal-Ag mineralisation at Dikulushi and in other deposits on the Kundelungu Plateau (Democratic Republic of Congo) developed during two episodes. Subeconomic Cu-Pb-Zn-Fe polysulphide ores were generated during the Lufilian Orogeny (c. 520 Ma ago) in a set of E-W- and NE-SW-oriented faults. Their lead has a relatively unradiogenic and internally inhomogeneous isotopic composition (206Pb/204Pb = 18.07-18.49), most likely generated by mixing of Pb from isotopically heterogeneous clastic sources. These sulphides were remobilised and enriched after the Lufilian Orogeny, along reactivated and newly formed NE-SW-oriented faults into a chalcocite-dominated Cu-Ag mineralisation of high economic interest. The chalcocite samples contain only trace amounts of lead and show mostly radiogenic Pb isotope signatures that fall along a linear trend in the 207Pb/204Pb vs. 206Pb/204Pb diagram (206Pb/204Pb = 18.66-23.65; 207Pb/204Pb = 15.72-16.02). These anomalous characteristics reflect a two-stage evolution involving admixture of both radiogenic lead and uranium during a young fluid event possibly c. 100 Ma ago. The Pb isotope systematics of local host rocks to mineralisation also indicate some comparable young disturbance of their U-Th-Pb systems, related to the same event. They could have provided Pb with sufficiently radiogenic compositions that was added to less radiogenic Pb remobilised from precursor Cu-Pb-Zn-Fe polysulphides, whereas the U most likely originated from external sources. Local metal sources are also suggested by the 208Pb/204Pb-206Pb/204Pb systematics of combined ore and rock lead, which indicate a pronounced and diversified lithological control of the immediate host rocks on the chalcocite-dominated Cu-Ag ores. The Pb isotope systematics of polysulphide mineralisation on the Kundelungu Plateau clearly record a diachronous evolution.

  7. Isotopic Ag-Cu-Pb record of silver circulation through 16th-18th century Spain.

    PubMed

    Desaulty, Anne-Marie; Telouk, Philippe; Albalat, Emmanuelle; Albarède, Francis

    2011-05-31

    Estimating global fluxes of precious metals is key to understanding early monetary systems. This work adds silver (Ag) to the metals (Pb and Cu) used so far to trace the provenance of coinage through variations in isotopic abundances. Silver, copper, and lead isotopes were measured in 91 coins from the East Mediterranean Antiquity and Roman world, medieval western Europe, 16th-18th century Spain, Mexico, and the Andes and show a great potential for provenance studies. Pre-1492 European silver can be distinguished from Mexican and Andean metal. European silver dominated Spanish coinage until Philip III, but had, 80 y later after the reign of Philip V, been flushed from the monetary mass and replaced by Mexican silver. PMID:21606351

  8. Comparative modular analysis of two complex sulfosalt structures: sterryite, Cu(Ag,Cu)3Pb19(Sb,As)22(As-As)S56, and parasterryite, Ag4Pb20(Sb,As)24S58.

    PubMed

    Moëlo, Yves; Guillot-Deudon, Catherine; Evain, Michel; Orlandi, Paolo; Biagioni, Cristian

    2012-10-01

    The crystal structures of two very close, but distinct complex minerals of the lead sulfosalt group have been solved: sterryite, Cu(Ag,Cu)(3)Pb(19)(Sb,As)(22)(As-As)S(56), and parasterryite, Ag(4)Pb(20)(Sb,As)(24)S(58). They are analyzed and compared according to modular analysis. The fundamental building block is a complex column centred on a Pb(6)S(12) triangular prismatic core, with two additional long and short arms. The main chemical and topological differences relate to the short arm, which induces a relative a/4 shift (~2 Å along the elongation parameter) of the constitutive rod layers, as illustrated by distinct cell settings within the same space group (P2(1)/n and P2(1)/c, respectively). Selection of the shortest (i.e. strongest) (Sb,As)-S bonds permitted to enhance the polymeric organization of (Sb,As) atoms with triangular pyramidal coordination. These two quasi-homeotypic structures are expanded derivatives of owyheeite, Ag(3)Pb(10)Sb(11)S(28). The hierarchy of organization levels from zero- to three-dimensional entities is subordinated to building operators, which appear as the driving force for the construction of such complex structures. Minor cations (Ag, Cu) or the As-As pair in sterryite secure the final locking, which favours the formation of one or the other compound. PMID:22992793

  9. The Transfiguration continental red-bed Cu-Pb-Zn-Ag deposit, Quebec Appalachians, Canada

    NASA Astrophysics Data System (ADS)

    Cabral, Alexandre Raphael; Beaudoin, Georges; Taylor, Bruce E.

    2009-04-01

    The Transfiguration Cu-Pb-Zn-Ag deposit, enclosed within reduced grey sandstone, is associated with continental red beds of the Lower Silurian Robitaille Formation in the Quebec Appalachians, Canada. The Robitaille Formation rests unconformably on foliated Cambro-Ordovician rocks. The unconformity is locally cut by barite veins. The basal unit of the Robitaille Formation comprises green wacke and pebble conglomerate, which locally contain calcite nodules. The latter have microstructures characteristic of alpha-type calcretes, such as “floating” fabrics, calcite-filled fractures (crystallaria) and circumgranular cracks. Massive, grey sandstone overlies the basal green wacke and pebble conglomerate unit, which is overlain, in turn, by red, fine-grained sandstone. Mineralisation occurred underneath the red sandstone unit, chiefly in the grey sandstone unit, as disseminated and veinlet sulphides. Chalcopyrite, the most abundant Cu sulphide, replaced early pyrite. Calcrete, disseminated carbonate and vein carbonate have stable isotope ratios varying from -7.5‰ to -1.1‰ δ13C and from 14.7‰ to 21.3‰ δ18O. The negative δ13C values indicate the oxidation of organic matter in a continental environment. Sulphur isotope ratios for pyrite, chalcopyrite and galena vary from -19‰ to 25‰ δ34S, as measured on mineral concentrates by a conventional SO2 technique. Laser-assisted microanalyses (by fluorination) of S isotopes in pyrite show an analogous range in δ34S values, from -21‰ to 25‰. Negative and positive δ34S values are compatible with bacterial sulphate reduction (BSR) in systems open and closed with respect to sulphate. We interpret similarly high δ34S values for sulphide concentrates (25.1‰) and for vein barite (26.2‰) to result from rapid and complete thermochemical reduction of pore-water sulphate. Two early to late diagenetic stages of mineralisation best explain the origin of the Transfiguration deposit. The first stage was characterised

  10. Direct detection of Pb in urine and Cd, Pb, Cu, and Ag in natural waters using electrochemical sensors immobilized with DMSA functionalized magnetic nanoparticles

    SciTech Connect

    Yantasee, Wassana; Hongsirikarn, Kitiya; Warner, Cynthia L.; Choi, Daiwon; Sangvanich, Thanapon; Toloczko, Mychailo B.; Warner, Marvin G.; Fryxell, Glen E.; Addleman, Raymond S.; Timchalk, Chuck

    2008-03-01

    Urine is universally recognized as one of the best non-invasive matrices for biomonitoring exposure to a broad range of xenobiotics including toxic metals. For direct, simple, and field-deployable monitoring of urinary Pb, electrochemical sensors employing superparamagnetic iron oxide (Fe3O4) nanoparticles with a surface functionalization of dimercaptosuccinic acid (DMSA) has been developed. The metal detection involves rapid collection of dispersed metal-bound nanoparticles from a sample solution at a magnetic or electromagnetic electrode, followed by the stripping voltammetry of the metal in acidic medium. The sensors were evaluated as a function of solution pH, the binding affinity of Pb to DMSA-Fe3O4, the ratio of nanoparticles per sample volume, preconcentration time, and Pb concentrations. The effect of binding competitions between the DMSA-Fe3O4 and urine constituents for Pb on the sensor responses was studied. After 90s of preconcentration in samples containing 25 vol.% of rat urine and 0.1 g/L of DMSA-Fe3O4, the sensor could detect background level of Pb (< 1 ppb) and yielded linear responses from 0 to 50 ppb of Pb, excellent reproducibility (%R.S.D of 5.3 for seven measurements of 30 ppb Pb), and Pb concentrations comparable to those measured by ICP-MS. The sensor could also simultaneously detect background levels (< 1 ppb) of Cd, Pb, Cu, and Ag in river and seawater.

  11. Distributions of dissolved trace metals (Cd, Cu, Mn, Pb, Ag) in the southeastern Atlantic and the Southern Ocean

    NASA Astrophysics Data System (ADS)

    Boye, M.; Wake, B. D.; Lopez Garcia, P.; Bown, J.; Baker, A. R.; Achterberg, E. P.

    2012-08-01

    Comprehensive synoptic datasets (surface water down to 4000 m) of dissolved cadmium (Cd), copper (Cu), manganese (Mn), lead (Pb) and silver (Ag) are presented along a section between 34° S and 57° S in the southeastern Atlantic Ocean and the Southern Ocean to the south off South Africa. The vertical distributions of Cu and Ag display nutrient-like profiles similar to silicic acid, and of Cd similar to phosphate. The distribution of Mn shows a subsurface maximum in the oxygen minimum zone, whereas Pb concentrations are rather invariable with depth. Dry deposition of aerosols is thought to be an important source of Pb to surface waters close to South Africa, and dry deposition and snowfall may have been significant sources of Cu and Mn at the higher latitudes. Furthermore, the advection of water masses enriched in trace metals following contact with continental margins appeared to be an important source of trace elements to the surface, intermediate and deep waters in the southeastern Atlantic Ocean and the Antarctic Circumpolar Current. Hydrothermal inputs may have formed a source of trace metals to the deep waters over the Bouvet Triple Junction ridge crest, as suggested by relatively enhanced dissolved Mn concentrations. The biological utilization of Cu and Ag was proportional to that of silicic acid across the section, suggesting that diatoms formed an important control over the removal of Cu and Ag from surface waters. However, uptake by dino- and nano-flagellates may have influenced the distribution of Cu and Ag in the surface waters of the subtropical Atlantic domain. Cadmium correlated strongly with phosphate (P), yielding lower Cd / P ratios in the subtropical surface waters where phosphate concentrations were below 0.95 μM. The greater depletion of Cd relative to P observed in the Weddell Gyre compared to the Antarctic Circumpolar Current could be due to increase Cd uptake induced by iron-limiting conditions in these high-nutrient-low-chlorophyll waters

  12. Distributions of dissolved trace metals (Cd, Cu, Mn, Pb, Ag) in the southeastern Atlantic and the Southern Ocean

    NASA Astrophysics Data System (ADS)

    Boye, M.; Wake, B. D.; Lopez Garcia, P.; Bown, J.; Baker, A. R.; Achterberg, E. P.

    2012-03-01

    Comprehensive synoptic datasets (surface water down to 4000 m) of dissolved cadmium (Cd), copper (Cu), manganese (Mn), lead (Pb) and silver (Ag) are presented along a section between 34° S and 57° S in the southeastern Atlantic Ocean and the Southern Ocean to the south off South Africa. The vertical distributions of Cu, Ag, and of Cd display nutrient-like profiles similar to silicic acid, and phosphate, respectively. The distribution of Mn shows a subsurface maximum in the oxygen minimum zone, whereas Pb concentrations are rather invariable with depth. Dry deposition of aerosols is thought to be an important source of Pb to surface waters close to South Africa, and dry deposition and snowfall may have been significant sources of Cu and Mn at the higher latitudes. Furthermore, the advection of water-masses enriched in trace metals following contact with continental margins appeared to be an important source of trace elements to the surface, intermediate and deep waters in the southeastern Atlantic Ocean and the Antarctic Circumpolar Current. Hydrothermal inputs appeared to have formed a source of trace metals to the deep waters over the Bouvet Triple Junction ridge crest, as suggested by relatively enhanced dissolved Mn concentrations. The biological utilization of Cu and Ag was proportional to that of silicic acid across the section, suggesting that diatoms formed an important control over the removal of Cu and Ag from surface waters. However uptake by dino- and nano-flagelattes may have influenced the distribution of Cu and Ag in the surface waters of the subtropical Atlantic domain. Cadmium correlated strongly with phosphate (P), yielding lower Cd/P ratios in the subtropical surface waters where phosphate concentrations were below 0.95 μM. The greater depletion of Cd relative to P observed in the Weddell Gyre compared to the Antarctic Circumpolar Current could be due to increase Cd-uptake induced by iron-limiting conditions in these High-Nutrient Low

  13. Testing WHAM-FTOX with laboratory toxicity data for mixtures of metals (Cu, Zn, Cd, Ag, Pb).

    PubMed

    Tipping, Edward; Lofts, Stephen

    2015-04-01

    The Windermere humic aqueous model using the toxicity function (WHAM-FTOX ) describes cation toxicity to aquatic organisms in terms of 1) accumulation by the organism of metabolically active protons and metals at reversible binding sites, and 2) differing toxic potencies of the bound cations. Cation accumulation (νi , in mol g(-1) ) is estimated through calculations with the WHAM chemical speciation model by assuming that organism binding sites can be represented by those of humic acid. Toxicity coefficients (αi ) are combined with νi to obtain the variable FTOX (= Σ αi νi ) which, between lower and upper thresholds (FTOX,LT , FTOX,UT ), is linearly related to toxic effect. Values of αi , FTOX,LT , and FTOX,LT are obtained by fitting toxicity data. Reasonable fits (72% of variance in toxic effect explained overall) were obtained for 4 large metal mixture acute toxicity experiments involving daphnids (Cu, Zn, Cd), lettuce (Cu, Zn, Ag), and trout (Zn, Cd, Pb). Strong nonadditive effects, most apparent in results for tests involving Cd, could be explained approximately by purely chemical competition for metal accumulation. Tentative interpretation of parameter values obtained from these and other experimental data suggests the following order of bound cation toxicity: H < Al < (Cu Zn Pb UO2 ) < (Cd Ag). Another trend is a strong increase in Cd toxicity relative to that of Zn as organism complexity increases (from bacteria to fish). PMID:25318827

  14. Pb-Bi-Ag-Cu-(Hg) chemistry of galena and some associated sulfosalts. A review and some new data from Colorado California and Pennsylvania

    USGS Publications Warehouse

    Foord, Eugene E.; Shawe, Daniel R.

    1989-01-01

    Galena, associated with Pb-Bi-Ag sulfosalts and simple sulfides, contains varied amounts of Ag and Bi in the Dandy vein system, Idarado mine, Ouray, Colorado; the Jackass mine, Darwin District, California; and the Leadville district, Colorado. Silver- and bismuth-bearing galena associated with minor amounts of pyrite, chalcopyrite and sphalerite occur at the Pequea mine, Lancaster County, Pennsylvania. Ag and Bi contents in the Dandy suite of galena range from about 1.4 to 3.4 and 2.5 to 6.5 wt.% respectively, and are comparable or lower in galena from the other localities. Exsolved matildite is present in galena from the Dandy, Jackass and Leadville localities. The presence in significant amounts of both Ag and Bi in a Pb-rich sulfide system is necessary for formation of PbSss (galena solid-solution). If Ag (especially) and Bi (to a lesser extent) are absent, the galena formed will be essentially pure PbS. Some minor Sb may substitute for Bi. Compositional data for all of the galena samples are in agreement with a previously proposed linear relationship between a and Ag-Bi(Sb) content. Matildite and seven additional Pb-Bi-Ag-Cu sulfosalts have been identified from the Dandy vein system, based on electron-microprobe analyses and some X-ray powder-diffraction data.

  15. Geological, fluid inclusion and isotopic studies of the Yinshan Cu-Au-Pb-Zn-Ag deposit, South China: Implications for ore genesis and exploration

    NASA Astrophysics Data System (ADS)

    Wang, Guo-Guang; Ni, Pei; Wang, Ru-Cheng; Zhao, Kui-Dong; Chen, Hui; Ding, Jun-Ying; Zhao, Chao; Cai, Yi-Tao

    2013-09-01

    The Yinshan Cu-Au-Pb-Zn-Ag deposit is located in Dexing, South China. Ore bodies are primarily hosted in low-grade phyllite of the Neoproterozoic Shuangqiaoshan Group along EW- and NNW-striking fault zones. Pb-Zn-Ag mineralization is dictated by Jurassic rhyolitic quartz porphyries (ca. 172 Ma), whereas Cu-Au mineralization is associated with Jurassic dacite porphyries (ca. 170 Ma). The main ore minerals are pyrite, chalcopyrite, galena, sphalerite, tetrahedrite-tennatite, gold, silver, and silver sulphosalt, and the principal gangue minerals are quartz, sericite, calcite, and chlorite. Two-phase liquid-rich (type I), two-phase vapor-rich (type II), and halite-bearing (type III) fluid inclusions can be observed in the hydrothermal quartz-sulfides veins. Type I inclusions are widespread and have homogenization temperatures of 187-303 °C and salinities of 4.2-9.5 wt.% NaCl equivalent in the Pb-Zn-Ag mineralization, and homogenization temperatures of 196-362 °C and salinities of 3.5-9.9 wt.% NaCl equivalent in the Cu-Au mineralization. The pervasive occurrence of type I fluid inclusions with low-moderate temperatures and salinities implies that the mineralizing fluids formed in epithermal environments. The type II and coexisting type III inclusions, from deeper levels below the Cu-Au ore bodies, share similar homogenization temperatures of 317-448 °C and contrasting salinities of 0.2-4.2 and 30.9-36.8 wt.% NaCl equivalent, respectively, which indicates that boiling processes occurred. The sulfur isotopic compositions of sulfides (δ34S = -1.7‰ to +3.2‰) suggest a homogeneous magmatic sulfur source. The lead isotopes of sulfides (206Pb/204Pb = 18.01-18.07; 207Pb/204Pb = 15.55-15.57; and 208Pb/204Pb = 38.03-38.12) are consistent with those of volcanic-subvolcanic rocks (206Pb/204Pb = 18.03-18.10; 207Pb/204Pb = 15.56-15.57; and 208Pb/204Pb = 38.02-38.21), indicating a magmatic origin for lead in the ore. The oxygen and hydrogen isotope compositions (δ18O = +7.8

  16. Re-Os and U-Pb geochronology of the Laochang Pb-Zn-Ag and concealed porphyry Mo mineralization along the Changning-Menglian suture, SW China: implications for ore genesis and porphyry Cu-Mo exploration

    NASA Astrophysics Data System (ADS)

    Deng, Xiao-Dong; Li, Jian-Wei; Zhao, Xin-Fu; Wang, Hong-Qiang; Qi, Liang

    2016-02-01

    Numerous polymetallic volcanogenic massive sulfide (VMS), vein, and replacement deposits are distributed along the Changning-Menglian suture zone in Sanjiang Tethyan metallogenic province, SW China. Laochang is the largest Pb-Zn-Ag vein and replacement deposit in this area, with a proven reserve of 0.51 Mt Pb, 0.34 Mt Zn, and 1,737 t Ag. Its age and relationship to magmatic events and VMS deposits in the region, however, have long been debated. In this paper, we present pyrite Re-Os and titanite U-Pb ages aiming to provide significant insights into the timing and genesis of the Pb-Zn-Ag mineralization. Pyrite grains in textural equilibrium with galena, sphalerite, and chalcopyrite from stratabound Pb-Zn-Ag and Cu-bearing Pb-Zn-Ag orebodies have a Re-Os isochron age of 45.7 ± 3.1 Ma (2 σ, mean square weighted deviation (MSWD) = 0.45), whereas titanite grains intergrown with sulfide minerals yield a weighted mean 206Pb/238U age of 43.4 ± 1.2 Ma (2 σ, n = 8). A Mo-mineralized granitic porphyry intersected by recent drilling below the Laochang Pb-Zn-Ag ores yields a zircon U-Pb age of 44.4 ± 0.4 Ma (2 σ, n = 12). Within analytical uncertainties, the ages of the Pb-Zn-Ag deposit and the concealed Mo-mineralized porphyry are indistinguishable, indicating that they are products of a single magmatic hydrothermal system. The results show that Laochang Pb-Zn-Ag deposit is significantly younger than the host mafic volcanic rock (zircon U-Pb age of 320.8 ± 2.7 Ma; 2 σ, n = 12) and Silurian VMS deposits along the Changning-Menglian suture zone, arguing against its origin as a Carboniferous VMS deposit as many researchers claimed. The initial 187Os/188Os ratio (0.540 ± 0.012) obtained from the pyrite Re-Os isochron suggests that metals were likely derived from the granitic porphyry that formed from a hybrid magma due to mixing of crustal- and mantle-derived melts, rather than from the mafic volcanic host rocks as previously thought. Our results favor that the Laochang

  17. Origin of epithermal Ag-Au-Cu-Pb-Zn mineralization in Guanajuato, Mexico

    NASA Astrophysics Data System (ADS)

    Mango, Helen; Arehart, Greg; Oreskes, Naomi; Zantop, Half

    2014-01-01

    The Guanajuato epithermal district is one of the largest silver producers in Mexico. Mineralization occurs along three main vein systems trending dominantly northwest-southeast: the central Veta Madre, the La Luz system to the northwest, and the Sierra system to the east. Mineralization consists dominantly of silver sulfides and sulfosalts, base metal sulfides (mostly chalcopyrite, galena, sphalerite, and pyrite), and electrum. There is a broad zonation of metal distribution, with up to 10 % Cu+Pb+Zn in the deeper mines along the northern and central portions of the Veta Madre. Ore occurs in banded veins and breccias and as stockworks, with gangue composed dominantly of quartz and calcite. Host rocks are Mesozoic sedimentary and intrusive igneous rocks and Tertiary volcanic rocks. Most fluid inclusion homogenization temperatures are between 200 and 300 °C, with salinities below 4 wt.% NaCl equivalent. Fluid temperature and salinity decreased with time, from 290 to 240 °C and from 2.5 to 1.1 wt.% NaCl equivalent. Relatively constant fluid inclusion liquid-to-vapor ratios and a trend of decreasing salinity with decreasing temperature and with increasing time suggest dilution of the hydrothermal solutions. However, evidence of boiling (such as quartz and calcite textures and the presence of adularia) is noted along the Veta Madre, particularly at higher elevations. Fluid inclusion and mineralogical evidence for boiling of metal-bearing solutions is found in gold-rich portions of the eastern Sierra system; this part of the system is interpreted as the least eroded part of the district. Oxygen, carbon, and sulfur isotope analysis of host rocks, ore, and gangue minerals and fluid inclusion contents indicate a hydrothermal fluid, with an initial magmatic component that mixed over time with infiltrating meteoric water and underwent exchange with host rocks. Mineral deposition was a result of decreasing activities of sulfur and oxygen, decreasing temperature, increasing p

  18. Timing of porphyry (Cu-Mo) and base metal (Zn-Pb-Ag-Cu) mineralisation in a magmatic-hydrothermal system—Morococha district, Peru

    NASA Astrophysics Data System (ADS)

    Catchpole, Honza; Kouzmanov, Kalin; Bendezú, Aldo; Ovtcharova, Maria; Spikings, Richard; Stein, Holly; Fontboté, Lluís

    2015-12-01

    The Morococha district in central Peru is characterised by economically important Cordilleran polymetallic (Zn-Pb-Ag-Cu) vein and replacement bodies and the large Toromocho porphyry Cu-Mo deposit in its centre. U-Pb, Re-Os, and 40Ar/39Ar geochronology data for various porphyry-related hydrothermal mineralisation styles record a 3.5-Ma multi-stage history of magmatic-hydrothermal activity in the district. In the late Miocene, three individual magmatic-hydrothermal centres were active: the Codiciada, Toromocho, and Ticlio centres, each separated in time and space. The Codiciada centre is the oldest magmatic-hydrothermal system in the district and consists of a composite porphyry stock associated with anhydrous skarn and quartz-molybdenite veins. The hydrothermal events are recorded by a titanite U-Pb age at 9.3 ± 0.2 Ma and a molybdenite Re-Os age at 9.26 ± 0.03 Ma. These ages are indistinguishable from zircon U-Pb ages for porphyry intrusions of the composite stock and indicate a time span of 0.2 Ma for magmatic-hydrothermal activity. The small Ticlio magmatic-hydrothermal centre in the west of the district has a maximum duration of 0.3 Ma, ranging from porphyry emplacement to porphyry mineralisation at 8.04 ± 0.14 Ma (40Ar/39Ar muscovite cooling age). The Toromocho magmatic-hydrothermal centre has a minimum of five recorded porphyry intrusions that span a total of 1.3 Ma and is responsible for the formation of the giant Toromocho Cu-Mo deposit. At least two hydrothermal pulses are identified. Post-dating a first pulse of molybdenite mineralisation, wide-spread hydrous skarn covers an area of over 6 km2 and is recorded by five 40Ar/39Ar cooling ages at 7.2-6.8 Ma. These ages mark the end of the slowly cooling and long-lived Toromocho magmatic-hydrothermal centre soon after last magmatic activity at 7.26 ± 0.02 Ma. District-wide (50 km2) Cordilleran base metal vein and replacement bodies post-date the youngest recorded porphyry mineralisation event at Toromocho

  19. SHRIMP U-Pb ages of xenotime and monazite from the Spar Lake red bed-associated Cu-Ag deposit, western Montana: Implications for ore genesis

    USGS Publications Warehouse

    Aleinikoff, John N.; Hayes, Timothy S.; Evans, Karl V.; Mazdab, Frank K.; Pillers, Renee M.; Fanning, C. Mark

    2012-01-01

    Xenotime occurs as epitaxial overgrowths on detrital zircons in the Mesoproterozoic Revett Formation (Belt Supergroup) at the Spar Lake red bed-associated Cu-Ag deposit, western Montana. The deposit formed during diagenesis of Revett strata, where oxidizing metal-bearing hydrothermal fluids encountered a reducing zone. Samples for geochronology were collected from several mineral zones. Xenotime overgrowths (1–30 μm wide) were found in polished thin sections from five ore and near-ore zones (chalcocite-chlorite, bornite-calcite, galena-calcite, chalcopyrite-ankerite, and pyrite-calcite), but not in more distant zones across the region. Thirty-two in situ SHRIMP U-Pb analyses on xenotime overgrowths yield a weighted average of 207Pb/206Pb ages of 1409 ± 8 Ma, interpreted as the time of mineralization. This age is about 40 to 60 m.y. after deposition of the Revett Formation. Six other xenotime overgrowths formed during a younger event at 1304 ± 19 Ma. Several isolated grains of xenotime have 207Pb/206Pb ages in the range of 1.67 to 1.51 Ga, and thus are considered detrital in origin. Trace element data can distinguish Spar Lake xenotimes of different origins. Based on in situ SHRIMP analysis, detrital xenotime has heavy rare earth elements-enriched patterns similar to those of igneous xenotime, whereas xenotime overgrowths of inferred hydrothermal origin have hump-shaped (i.e., middle rare earth elements-enriched) patterns. The two ages of hydrothermal xenotime can be distinguished by slightly different rare earth elements patterns. In addition, 1409 Ma xenotime overgrowths have higher Eu and Gd contents than the 1304 Ma overgrowths. Most xenotime overgrowths from the Spar Lake deposit have elevated As concentrations, further suggesting a genetic relationship between the xenotime formation and Cu-Ag mineralization.

  20. Geological, fluid inclusion and isotopic studies of the Baiyangping Pb-Zn-Cu-Ag polymetallic deposit, Lanping basin, Yunnan province, China

    NASA Astrophysics Data System (ADS)

    Wang, Xiao-Hu; Hou, Zeng-Qian; Song, Yu-Cai; Zhang, Hong-Rui

    2015-11-01

    Baiyangping Pb-Zn-Cu-Ag deposit is located in Lanping basin, northwestern Yunnan province. The deposit is composed of a few ore veins and can be divided into several ore blocks. The ore bodies are primarily hosted in Mesozoic carbonate, sandstone and siltstone along the north-south-striking, NWW-striking and NE-SW-striking fault zones. There are breccia, massive, vein like and disseminated ores. The main ore minerals are sphalerite, galena, gratonite, jordanite, tetrahedrite series minerals, chalcocite, chalcopyrite, realgar, orpiment, bournonite, cobalt-bearing arsenopyrite, argentite, kongsbergite, cobaltine, siegenite. The sizes of fluid inclusions in Baiyangping deposit are generally less than 10 μm and have the shape of round, oval, irregular, etc. The ore-forming fluid system is Ca2+-Na+-K+-Mg2+-Cl--F--NO3- brine system. The freezing temperature of fluid inclusions in mineral deposits ranges from -26.4 to -0.2 °C, average -14.6 °C; the homogenization temperature is concentrated in 120-180 °C, and the salinity is between 0.35 and 24.73 wt% (NaCleq), average 16.9 wt% (NaCleq). δ13CPDB and δ18OSMOW values of hydrothermal calcite range from -4.16‰ to 3‰ and -2.5‰ to 20.4‰, respectively. δ34S values of sulfide minerals range from -10.2‰ to 11.2‰, average 5.6‰. The sulfide samples yield 206Pb/204Pb values of 18.609-18.818, 207Pb/204Pb of 15.548-15.842 and 208Pb/204Pb = 38.514-39.556. C-O-S-Pb isotope compositions of the Baiyangping deposit indicate a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata, the ore-forming fluid belongs to basin brine fluid system, which is mixed with the precipitate water, sulfur in sulfides and sulfosalts is derived from thermal chemical sulfate reduction, and the thermal decomposition of sulfur-bearing organic matter. The metal mineralization material is from sedimentary strata and basement. The late Pb-Zn polymetallic mineralization event

  1. Corrosion Behavior of Pb-Free Sn-1Ag-0.5Cu- XNi Solder Alloys in 3.5% NaCl Solution

    NASA Astrophysics Data System (ADS)

    Mohanty, Udit Surya; Lin, Kwang-Lung

    2013-04-01

    Potentiodynamic polarization techniques were employed in the present study to investigate the corrosion behavior of Pb-free Sn-1Ag-0.5Cu- XNi solder alloys in 3.5% NaCl solution. Polarization studies indicated that an increase in Ni content from 0.05 wt.% to 1 wt.% in the solder alloy shifted the corrosion potential ( E corr) towards more negative values and increased the linear polarization resistance. Increased addition of Ni to 1 wt.% resulted in significant increase in the concentration of both Sn and Ni oxides on the outer surface. Secondary-ion mass spectrometry and Auger depth profile analysis revealed that oxides of tin contributed primarily towards the formation of the passive film on the surface of the solder alloys containing 0.05 wt.% and 1 wt.% Ni. Scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDX) established the formation of a Sn whisker near the passive region of the solder alloy obtained from the polarization curves. The formation of Sn whiskers was due to the buildup of compressive stress generated by the increase in the volume of the oxides of Sn and Ni formed on the outer surface. The presence of Cl- was responsible for the breakdown of the passive film, and significant pitting corrosion in the form of distinct pits was noticed in Sn-1Ag-0.5Cu-0.5Ni solder alloy after the polarization experiment.

  2. Effects of Ag{sub 2}O doping on the electromagnetic properties of a BiPbSrCaCuO superconductor

    SciTech Connect

    Lee, Sang Heon; Kim, H. C.

    2001-06-01

    Electromagnetic properties of an Ag{sub 2}O doped and an undoped BiPbSrCaCuO superconductor were evaluated to investigate the effect of the pinning center on the magnetic shielding and suspension/levitation phenomena. The residual magnetization M=M{sup +}{endash}M{sup {minus}} increased with the dopant concentration, a maximum for 2% doping, wherein a fine uniform dispersion of Ag particles was observed. The fine Ag particles form a cluster with increasing dopant as the particles condense with each other and grow, consequently does the number of flux passing through decreases, so the magnetization M decreases. This result indicates that M is proportional to the number of magnetic flux lines passing through the sample, because the smaller the particle size the larger the ratio of the surface area to the volume. Magnetic shielding was evaluated by measuring the induced voltage in the secondary coil by placing the sample in between the primary coil. The voltage was initially set to 0.5 V, and decreased to 0.17 and 0.28 V, respectively, for the undoped and 2% Ag{sub 2}O doped samples. The much less change in the induced voltage for the 2% doped sample is attributed to increased flux shielding by shielding the vortex current. Simultaneous stable levitation and suspension of 2% Ag{sub 2}O doped disk samples weighing 0.3 g were observed, respectively, above (3 mm) and beneath (2 mm) a toroidal permanent magnet under a field cooled condition. The role of flux pinning is discussed to account for the phenomena by considering the hysteretic force function. {copyright} 2001 American Institute of Physics.

  3. Ideal Weyl Semimetals in the Chalcopyrites CuTlSe2 , AgTlTe2 , AuTlTe2 , and ZnPbAs2

    NASA Astrophysics Data System (ADS)

    Ruan, Jiawei; Jian, Shao-Kai; Zhang, Dongqin; Yao, Hong; Zhang, Haijun; Zhang, Shou-Cheng; Xing, Dingyu

    2016-06-01

    Weyl semimetals are new states of matter which feature novel Fermi arcs and exotic transport phenomena. Based on first-principles calculations, we report that the chalcopyrites CuTlSe2 , AgTlTe2 , AuTlTe2 , and ZnPbAs2 are ideal Weyl semimetals, having largely separated Weyl points (˜0.05 Å-1 ) and uncovered Fermi arcs that are amenable to experimental detections. We also construct a minimal effective model to capture the low-energy physics of this class of Weyl semimetals. Our discovery is a major step toward a perfect playground of intriguing Weyl semimetals and potential applications for low-power and high-speed electronics.

  4. AC losses in BiPbSrCaCuO-2223/Ag multifilamentary tapes in conditions similar to those in superconducting transmission lines

    NASA Astrophysics Data System (ADS)

    Majoros, M.; Glowacki, B. A.; Campbell, A. M.; Han, Z.; Vase, P.

    1998-12-01

    Transport AC losses in BiPbSrCaCuO-2223/Ag multifilamentary tape with 19 filaments were measured. The sample was 1.05 m long, wound in form of a helix with a gap between the tapes comparable with the tape width. Two different types of potential leads-tape following, axis following-with taps positioned in the centre of the tape were mounted on inner as well as outer surface of the helical sample. AC losses were measured at power frequencies by an electrical method using a lock-in nanovoltmeter. The influence of potential wires arrangement and the potential taps position on measured AC loss level and its frequency dependence was analysed.

  5. Flux patterns of multifilamentary Ag-sheathed (Pb,Bi)2Sr2Ca2Cu3O10+δ tapes

    NASA Astrophysics Data System (ADS)

    Koblischka, M. R.; Johansen, T. H.; Bratsberg, H.; Půst, L.; Galkin, A.; Nálevka, P.; Maryško, M.; Jirsa, M.; Bentzon, M.; Bodin, P.; Vase, P.; Freltoft, T.

    1998-06-01

    Flux patterns of multifilamentary Ag-sheathed (Pb,Bi)2Sr2Ca2Cu3O10+δ tapes comprising 19 filaments are visualized by means of magneto-optic imaging. In low fields, the shielding currents are seen to flow mainly in the outermost filaments. With increasing external magnetic field, the inner filaments also contribute to the current flow. To compare the local flux distribution with the integral magnetization values, magnetization loops are measured by a SQUID magnetometer on the same sample following the fields used in the magneto-optic imaging (± 120 mT) and covering fields up to ±5 T at various temperatures. The magnetization loops also reveal that the multifilamentary tapes show the anomalous position of the central peak, but always less pronounced than in monofilamentary tapes.

  6. Ideal Weyl Semimetals in the Chalcopyrites CuTlSe_{2}, AgTlTe_{2}, AuTlTe_{2}, and ZnPbAs_{2}.

    PubMed

    Ruan, Jiawei; Jian, Shao-Kai; Zhang, Dongqin; Yao, Hong; Zhang, Haijun; Zhang, Shou-Cheng; Xing, Dingyu

    2016-06-01

    Weyl semimetals are new states of matter which feature novel Fermi arcs and exotic transport phenomena. Based on first-principles calculations, we report that the chalcopyrites CuTlSe_{2}, AgTlTe_{2}, AuTlTe_{2}, and ZnPbAs_{2} are ideal Weyl semimetals, having largely separated Weyl points (∼0.05  Å^{-1}) and uncovered Fermi arcs that are amenable to experimental detections. We also construct a minimal effective model to capture the low-energy physics of this class of Weyl semimetals. Our discovery is a major step toward a perfect playground of intriguing Weyl semimetals and potential applications for low-power and high-speed electronics. PMID:27314733

  7. Positive feedback between strain localization and fluid flow at the ductile-brittle transition leading to Pb-Zn-Fe-Cu-Ag ore deposits in Lavrion (Greece)

    NASA Astrophysics Data System (ADS)

    Scheffer, Christophe; Tarantola, Alexandre; Vanderhaeghe, Olivier

    2016-04-01

    At the crustal scale, the ductile-brittle transition (DBT) might correspond to a physical barrier that separates a deep reservoir of metamorphic and magmatic fluids from a shallow reservoir of surficial fluids. Rock rheology, and thus the location of the DBT, is mainly governed by lithology, temperature and the presence/absence of fluids. Accordingly, the position of the DBT potentially evolves during orogenic evolution owing to thermal evolution and fluid circulation. In turn rocks are transferred across it during burial and exhumation. These processes induce connections between fluid reservoirs which might play a role on ore deposition. In this contribution, we discuss the impact of lithological heterogeneities on deformation, fluid flow and ore deposition based on the example of the Lavrion low-angle top-to-the-SSW detachment accommodating gravitational collapse of the Hellenides orogenic belt in Greece. The Lavrion peninsula, localized along the western boundary of the Attic-Cycladic Metamorphic Core Complex, is characterized by Pb-Zn-Fe-Cu-Ag ore mineralization mainly concentrated along a lithological contact (marble/schists) below and within a detachment shear zone. The mylonitic marble below the detachment shear zone is composed of white layers of pure marble alternating with blue layers containing impurities (SiO2, Al2O3, organic matter…). Development of the mylonitic fabric in competent impure blue marble is associated with its preferred dolomitization related to focused fluid infiltration. This mylonitic marble is cross-cut by several cataclastic horizons preferentially developed within the more competent impure blue marble and newly-crystallized dolomitic horizon. These cataclasites are invaded by fluorite and calcite gangue minerals showing locally Mn, Pb, Zn, Fe oxides and/or hydroxides, sphalerite, Ag-galena, Ag-sulfur and native Ag. Oxygen and carbon stable isotopes performed on marble sections point out decarbonation with magmatic contribution and

  8. Apparent ac losses in helical BiPbSrCaCuO-2223/Ag multifilamentary tape measured by different potential taps at power frequencies

    NASA Astrophysics Data System (ADS)

    Majoros, M.; Glowacki, B. A.; Campbell, A. M.; Han, Z.; Vase, P.

    1999-03-01

    Transport ac losses in BiPbSrCaCuO-2223/Ag multifilamentary tape in form of a helix with a 3 mm gap between the turns were measured in frequency range 40-125 Hz. Different positions of potential taps on outer and inner surface of the tape were used. Potential wires were led along the tape axis as well as along the axis of the helix. At currents lower than the critical current a strong dependence of measured apparent ac losses on potential taps position and on the form of potential wires was found. Suitably wound contact-less pick-up coils to detect magnetic flux of different magnetic field components were also used. They allowed us to measure the `magnetisation' part of apparent losses even when the sample was in resistive state, as well as the losses at the gap of the tape. Comparison of the losses at the gap of the tape with the existing theoretical model was made.

  9. Growth kinetics study of the (Bi,Pb) 2Sr 2Ca 2Cu 3O 10 grains in Ag/Ni composite-sheathed tapes

    NASA Astrophysics Data System (ADS)

    Chen, Xingpin; Yu, Xiaowei; Zhang, Jingpeng; Li, Mingya; Sun, Haibo; Liu, Qing

    2011-12-01

    The growth kinetics of the (Bi,Pb) 2Sr 2Ca 2Cu 3O 10 (Bi-2223) grains in Ag/Ni sheathed tapes have been investigated by the means of XRD and SEM. Samples were sintered at 837 °C for various time under low oxygen partial pressure. Monofilament tape after sintered for 50 h has a critical current ( I c) of 3.6 A. An analysis of the Bi-2223 phase evolution using Avrami relation reveals a three-stage process with obvious changes of the n-exponent during the Bi-2223 formation after about 3 and 20 h sintering. Secondary electron images show that the Bi-2223 grains nucleate at the initial stage and grow within a-b plane until their edges impinge each other. The thicknesses of Bi-2223 grains are measured statistically after various sintering time. The data denote that the thickness increase with the extension of sintering time and become more rapidly after 10 h sintering. A detailed process describing the growth of Bi-2223 grains is presented basing on the n-exponent and microstructural observation.

  10. Fluid inclusion and sulfur isotope thermometry of the Inkaya (Simav-Kütahya) Cu-Pb-Zn-(Ag) mineralization, NW TURKEY

    NASA Astrophysics Data System (ADS)

    Özen, Yeşim; Arik, Fetullah

    2013-09-01

    The Inkaya Cu-Pb-Zn-(Ag) mineralization, located about 20 km west of the Simav (Kütahya-Turkey), is situated in the northern part of the Menderes Massif Metamorphics. The mineralization is located along an E-W trending fault in the Cambrian Simav metamorphics consisting of quartz-muscovite schist, quartz-biotite schist, muscovite schist, biotite schist and the Arıkayası formation composed of marbles. Mineralized veins are 30-35 cm in width. The primary mineralization is represented by abundant galena, sphalerite, chalcopyrite, pyrite, fahlore and minor amounts of cerussite, anglesite, digenite, enargite, chalcocite, covellite, bornite, limonite, hematite and goethite with gangue quartz. Fluid inclusion studies on the quartz samples collected from the mineralized veins indicate that the temperature range of the fluids is 235°C to 340°C and the salinities are 0.7 to 4.49 wt. % NaCl equivalent. The wide range of homogenization temperatures indicates that two different fluid generations were trapped in quartz. Sulfur isotope studies of the sulfide minerals showed that all of the δ 34S values are between -2.1 and 2.6 per mil. These values are a typical range for hydrothermal sulfide minerals that have sulfur derived from a magmatic source. Pyrite-galena and pyrite-chalcopyrite sulfur isotope fractionation is consistent with an approach to isotopic equilibrium, and calculated temperatures are 254.6 and 277.4°C for pyrite-galena and 274.7°C for pyrite-chalcopyrite. The microthermometric data and sulfur isotope thermometry indicate the existence of a hydrothermal fluid that circulated along the fault crossing the Simav metamorphics and Arıkayası formation. Fluid inclusion and sulfur isotope thermometry can be used in combination with ore petrographical and geological information to provide site-specific targets for meso-hypothermal metal concentrations.

  11. Transport critical current density of (Bi1.6Pb0.4)Sr2Ca2Cu3O10/Ag superconductor tapes with addition of nanosized CoFe2O4

    NASA Astrophysics Data System (ADS)

    Hafiz, M.; Abd-Shukor, R.

    2015-09-01

    The effect of nanosized CoFe2O4 (60 nm) addition on the transport critical current density, J c, of (Bi1.6Pb0.4)Sr2Ca2Cu3O10(CoFe2O4) x ( x = 0-0.05 wt%) superconductor prepared by the co-precipitation method was investigated. The optimal J c (measured using the four-point probe method) was observed in the x = 0.01 wt% pellets. Using this optimal wt%, Ag-sheathed (Bi1.6Pb0.4)Sr2Ca2Cu3O10(CoFe2O4)0.01 superconductor tapes were fabricated using the powder-in-tube method. The tapes were sintered for 50 and 100 h at 845 °C. The phase and microstructure of the samples were determined using the powder X-ray diffraction method and scanning electron microscopy, respectively. The temperature dependence of J c for the tapes in various applied magnetic fields was also measured. J c of (Bi1.6Pb0.4)Sr2Ca2Cu3O10(CoFe2O4)0.01/Ag tapes sintered for 100 h was 22,420 A/cm2 at 30 K. The non-added tapes sintered for 100 h showed a much lower J c (8280 A/cm2 at 30 K). This study showed that addition of CoFe2O4 nanoparticles enhanced the transport critical current density in the (Bi1.6Pb0.4)Sr2Ca2Cu3O10 superconductor tapes. This result is consistent with the previous calculations on frozen flux superconductor in a nanomagnet-superconductor hybrid system.

  12. Partitioning of V, Mn, Co, Ni, Cu, Zn, As, Mo, Ag, Sn, Sb, W, Au, Pb, and Bi between sulfide phases and hydrous basanite melt at upper mantle conditions

    NASA Astrophysics Data System (ADS)

    Li, Yuan; Audétat, Andreas

    2012-11-01

    The partitioning of 15 major to trace metals between monosulfide solid solution (MSS), sulfide liquid (SL) and mafic silicate melt (SM) was determined in piston-cylinder experiments performed at 1175-1300 °C, 1.5-3.0 GPa and oxygen fugacities ranging from 3.1 log units below to 1.0 log units above the quartz-fayalite-magnetite fO2 buffer, which conditions are representative of partial melting in the upper mantle in different tectonic settings. The silicate melt was produced by partial melting of a natural, amphibole-rich mantle source rock, resulting in hydrous (˜5 wt% H2O) basanitic melts similar to low-degree partial melts of metasomatized mantle, whereas the major element composition of the starting sulfide (˜52 wt% Fe; 39 wt% S; 7 wt% Ni; 2 wt% Cu) was similar to the average composition of sulfides in this environment. SL/SM partition coefficients are high (≥100) for Au, Ni, Cu, Ag, Bi, intermediate (1-100) for Co, Pb, Sn, Sb (±As, Mo), and low (≤1) for the remaining elements. MSS/SM partition coefficients are generally lower than SL/SM partition coefficients and are high (≥100) for Ni, Cu, Au, intermediate (1-100) for Co, Ag (±Bi, Mo), and low (≤1) for the remaining elements. Most sulfide-silicate melt partition coefficients vary as a function of fO2, with Mo, Bi, As (±W) varying by a factor >10 over the investigated fO2 range, Sb, Ag, Sn (±V) varying by a factor of 3-10, and Pb, Cu, Ni, Co, Au, Zn, Mn varying by a factor of 3-10. The partitioning data were used to model the behavior of Cu, Au, Ag, and Bi during partial melting of upper mantle and during fractional crystallization of primitive MORB and arc magmas. Sulfide phase relationships and comparison of the modeling results with reported Cu, Au, Ag, and Bi concentrations from MORB and arc magmas suggest that: (i) MSS is the dominant sulfide in the source region of arc magmas, and thus that Au/Cu ratios in the silicate melt and residual sulfides may decrease with increasing degree of

  13. Thick c-axis textured (Tl,Pb)(Ba,Sr)2Ca2Cu3O9/Ag0.37 superconducting tapes by an ink spray pyrolysis method using a Tl-free precursor

    NASA Astrophysics Data System (ADS)

    Schulz, Douglas L.; Parilla, Philip A.; Ginley, David S.; Voigt, James A.; Roth, E. Peter

    1994-11-01

    In this letter we demonstrate a synthetic route to thick (5-20 μm) highly c-axis textured, nearly phase-pure superconducting (Tl,Pb)(Ba,Sr)2Ca2Cu3O9/Ag0.37 tapes. First, a Tl-free ink consisting of Pb0.5Ba0.4Sr1.6Ca2.0Cu3.0O9/Ag0.37 precursor powder in an ethanolic ethyl cellulose binder is sprayed onto a heated LaAlO3 substrate. After an intermediate oxygen anneal to remove the carbonaceous binder, a static 2-zone thallination anneal is performed to promote superconducting phase formation. Films exhibit excellent c-axis texturing as evidenced by x-ray diffraction θ/2θ and rocking curve characterization with morphological evidence for partial melting by scanning electron microscopy. Electrical characterization of these films give Tc onset values of 106-115 K with Tc zero reached by 99-101 K and transport Jc(77 K) up to 2.9×104 A/cm2. A mixed strong/weak-linked magnetic field dependence is observed for these films at 77 K and 0.4 T.

  14. Genesis of the Assif El Mal Zn-Pb (Cu, Ag) vein deposit. An extension-related Mesozoic vein system in the High Atlas of Morocco. Structural, mineralogical, and geochemical evidence

    USGS Publications Warehouse

    Bouabdellah, M.; Beaudoin, G.; Leach, D.L.; Grandia, F.; Cardellach, E.

    2009-01-01

    The Assif El Mal Zn-Pb (Cu-Ag) vein system, located in the northern flank of the High Atlas of Marrakech (Morocco), is hosted in a Cambro-Ordovician volcaniclastic and metasedimentary sequence composed of graywacke, siltstone, pelite, and shale interlayered with minor tuff and mudstone. Intrusion of synorogenic to postorogenic Late Hercynian peraluminous granitoids has contact metamorphosed the host rocks giving rise to a metamorphic assemblage of quartz, plagioclase, biotite, muscovite, chlorite, amphibole, chloritoid, and garnet. The Assif El Mal Zn-Pb (Cu-Ag) mineralization forms subvertical veins with ribbon, fault breccia, cockade, comb, and crack and seal textures. Two-phase liquid-vapor fluid inclusions that were trapped during several stages occur in quartz and sphalerite. Primary inclusion fluids exhibit Th mean values ranging from 104??C to 198??C. Final ice-melting temperatures range from -8.1??C to -12.8??C, corresponding to salinities of ???15 wt.% NaCl equiv. Halogen data suggest that the salinity of the ore fluids was largely due to evaporation of seawater. Late secondary fluid inclusions have either Ca-rich, saline (26 wt.% NaCl equiv.), or very dilute (3.5 wt.% NaCl equiv.) compositions and homogenization temperatures ranging from 75??C to 150??C. The ??18O and ??D fluid values suggest an isotopically heterogeneous fluid source involving mixing between connate seawater and black-shale-derived organic waters. Low ??13CVPDB values ranging from -7.5??? to -7.7??? indicate a homogeneous carbon source, possibly organic matter disseminated in black shale hosting the Zn-Pb (Cu-Ag) veins. The calculated ??34SH2S values for reduced sulfur (22.5??? to 24.3???) are most likely from reduction of SO42- in trapped seawater sulfate or evaporite in the host rocks. Reduction of sulfate probably occurred through thermochemical sulfate reduction in which organic matter was oxidized to produce CO2 which ultimately led to precipitation of saddle dolomite with

  15. Genesis of the Assif El Mal Zn-Pb (Cu, Ag) vein deposit. An extension-related Mesozoic vein system in the High Atlas of Morocco. Structural, mineralogical, and geochemical evidence

    NASA Astrophysics Data System (ADS)

    Bouabdellah, Mohammed; Beaudoin, Georges; Leach, David L.; Grandia, Fidel; Cardellach, Esteve

    2009-08-01

    The Assif El Mal Zn-Pb (Cu-Ag) vein system, located in the northern flank of the High Atlas of Marrakech (Morocco), is hosted in a Cambro-Ordovician volcaniclastic and metasedimentary sequence composed of graywacke, siltstone, pelite, and shale interlayered with minor tuff and mudstone. Intrusion of synorogenic to postorogenic Late Hercynian peraluminous granitoids has contact metamorphosed the host rocks giving rise to a metamorphic assemblage of quartz, plagioclase, biotite, muscovite, chlorite, amphibole, chloritoid, and garnet. The Assif El Mal Zn-Pb (Cu-Ag) mineralization forms subvertical veins with ribbon, fault breccia, cockade, comb, and crack and seal textures. Two-phase liquid-vapor fluid inclusions that were trapped during several stages occur in quartz and sphalerite. Primary inclusion fluids exhibit T h mean values ranging from 104°C to 198°C. Final ice-melting temperatures range from -8.1°C to -12.8°C, corresponding to salinities of ˜15 wt.% NaCl equiv. Halogen data suggest that the salinity of the ore fluids was largely due to evaporation of seawater. Late secondary fluid inclusions have either Ca-rich, saline (26 wt.% NaCl equiv.), or very dilute (3.5 wt.% NaCl equiv.) compositions and homogenization temperatures ranging from 75°C to 150°C. The δ18O and δD fluid values suggest an isotopically heterogeneous fluid source involving mixing between connate seawater and black-shale-derived organic waters. Low δ13CVPDB values ranging from -7.5‰ to -7.7‰ indicate a homogeneous carbon source, possibly organic matter disseminated in black shale hosting the Zn-Pb (Cu-Ag) veins. The calculated δ34SH2S values for reduced sulfur (22.5‰ to 24.3‰) are most likely from reduction of SO4 2- in trapped seawater sulfate or evaporite in the host rocks. Reduction of sulfate probably occurred through thermochemical sulfate reduction in which organic matter was oxidized to produce CO2 which ultimately led to precipitation of saddle dolomite with

  16. Effects of temperature, silicate melt composition, and oxygen fugacity on the partitioning of V, Mn, Co, Ni, Cu, Zn, As, Mo, Ag, Sn, Sb, W, Au, Pb, and Bi between sulfide phases and silicate melt

    NASA Astrophysics Data System (ADS)

    Li, Yuan; Audétat, Andreas

    2015-08-01

    In order to assess the role of sulfide in controlling the ore metal budgets and fractionation during magmatic genesis and differentiation, the partition coefficients (D) of V, Mn, Co, Ni, Cu, Zn, As, Mo, Ag, Sn, Sb, W, Au, Pb, and Bi between sulfide liquid (SL), monosulfide solid solution (MSS), and basaltic to rhyolitic melts (SM) were determined at 900-1200 °C, 0.5-1.5 GPa, and oxygen fugacity (fO2) ranging from ∼FMQ-2 to FMQ+3, in a piston-cylinder apparatus. The DSL/SM values range from 0.4 to 2 for V, 0.5 to 3 for Mn, 80 to 580 for Co, 2300 to 18,000 for Ni, 800 to 4600 for Cu, 1 to 11 for Zn, 20 to 180 for As, 4 to 230 for Mo, 450 to 1600 for Ag, 5 to 24 for Sn, 10 to 80 for Sb, 0.03 to 0.16 for W, 2000 to 29,000 for Au, 24 to 170 for Pb, and 830 to 11,000 for Bi; whereas the DMSS/SM values range from 0.04 to 10 for V, 0.5 to 10 for Mn, 70 to 2500 for Co, 650 to 18,000 for Ni, 280 to 42,000 for Cu, 0.1 to 80 for Zn, 0.2 to 30 for As, 1 to 820 for Mo, 20 to 500 for Ag, 0.2 to 220 for Sn, 0.1 to 40 for Sb, 0.01 to 24 for W, 10 to 2000 for Au, 0.03 to 6 for Pb, and 1 to 350 for Bi. Both DMSS/SM and DSL/SM values generally increase with decreasing temperature or decreasing FeOtot content in silicate melt, except for Mo, DMSS/SM and DSL/SM of which show a clear decrease with decreasing temperature. At given temperature and FeOtot content, high oxygen fugacity appears to lead to a significant decrease in DMSS/SM of Au, Bi, Mo, and potentially As. The partitioning data obtained experimentally in this study and previous studies were fitted to an empirical equation that expresses the DMSS/SM and/or DSL/SM of a given element as a function of temperature, oxygen fugacity, and FeOtot content of the silicate melt: log (DSL/SMorDMSS/SM = d + a · 10, 000 / T + b · (ΔFMQ) + c · log (FeOmelt) in which T is temperature in K, FeOmelt denotes wt% FeOtot in silicate melt, and ΔFMQ denotes log fO2 relative to the fayalite-magnetite-quartz (FMQ) oxygen buffer. The

  17. RAPID COMMUNICATION: Radio frequency response of Ag-sheathed (Bi, Pb)2Sr2Ca2Cu3O10+x superconducting tapes

    NASA Astrophysics Data System (ADS)

    Grasso, G.; Malagoli, A.; Scati, N.; Guasconi, P.; Roncallo, S.; Siri, A. S.

    2000-10-01

    The response of long (Bi,Pb)2Sr2Ca2Cu3O10 conductors fabricated by the oxide-powder-in-tube method to a radio frequency excitation was investigated while employed as the inductive part of large L-C resonating circuits. After removal of the outer silver sheath, superconducting devices cooled down to 77 K showed superior properties compared to equivalent non-superconducting circuits: Bi-based resonators, conceived for a working frequency in the range between 5 and 17 MHz, presented an improvement of the quality factor by a factor of 20. This result opens new perspectives for the application of Bi-based superconducting materials in the detection of a weak radio frequency signal, as in magnetic resonance imaging.

  18. A rapid, partial leach and organic separation for the sensitive determination of Ag, Bi, Cd, Cu, Mo, Pb, Sb, and Zn in surface geologic materials by flame atomic absorption

    USGS Publications Warehouse

    Viets, J.G.; Clark, J.R.; Campbell, W.L.

    1984-01-01

    A solution of dilute hydrochloric acid, ascorbic acid, and potassium iodide has been found to dissolve weakly bound metals in soils, stream sediments, and oxidized rocks. Silver, Bi, Cd, Cu, Mo, Pb, Sb, and Zn are selectively extracted from this solution by a mixture of Aliquat 336 (tricaprylyl methyl ammonium chloride) and MIBK (methyl isobutyl ketone). Because potentially interfering major and minor elements do not extract, the organic separation allows interference-free determinations of Ag and Cd to the 0.05 ppm level, Mo, Cu, and Zn to 0.5 ppm, and Bi, Pb, and Sb to 1 ppm in the sample using flame atomic absorption spectroscopy. The analytical absorbance values of the organic solution used in the proposed method are generally enhanced more than threefold as compared to aqueous solutions, due to more efficient atomization and burning characteristics. The leaching and extraction procedures are extremely rapid; as many as 100 samples may be analyzed per day, yielding 800 determinations, and the technique is adaptable to field use. The proposed method was compared to total digestion methods for geochemical reference samples as well as soils and stream sediments from mineralized and unmineralized areas. The partial leach showed better anomaly contrasts than did total digestions. Because the proposed method is very rapid and is sensitive to pathfinder elements for several types of ore deposits, it should be useful for reconnaissance surveys for concealed deposits. ?? 1984.

  19. Synchrotron x-ray scattering measurements of bulk structural properties in superconducting (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}{endash}Ag tapes

    SciTech Connect

    Thurston, T.R.; Wildgruber, U.; Jisrawi, N.; Haldar, P.; Suenaga, M.; Wang, Y.L.

    1996-03-01

    The structural properties of superconducting (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}{endash}Ag (2223) tapes have been measured using synchrotron x-ray scattering techniques. The x-ray photon energy was tuned just below the silver {ital K} absorption edge so the penetration depth was large, which allowed the measurements to be performed in a transmission geometry without removing the silver cladding. Analysis of the peaks in 2{theta} scans indicates that residual (Bi,Pb){sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} (2212) superconductor starting material is present in all samples studied. The amount of 2212 varied widely among the tapes, and was not homogeneous along the length of each individual tape. Residual 2212 content increased near the ends of most samples, suggesting that 2223 phase development is sensitive to whether the superconducting material is encased in silver or not. The bulk {ital c}-axis alignment was measured in {approximately}100 mono- and multifilament samples, and correlations between {ital c}-axis alignment and current carrying capacity at 77 K were found. Multifilament samples generally had better alignment than monofilament samples. The {ital c}-axis alignment along the length of the tapes was uniform, and the superconducting material within {approximately}1 {mu}m of the Ag was better textured than the bulk of the sample. Intermediate pressings were directly shown to have an adverse affect on {ital c}-axis alignment. Finally, the evolution of texture and phase development was examined in a series of samples annealed for varying times. The 2212 starting material acquired the final {ital c}-axis alignment state after brief heating times, and only after much longer heating times did the 2212 transform into the 2223 phase. These results and their implications for improving processing procedures are discussed. {copyright} {ital 1996 American Institute of Physics.}

  20. 160 Ma of magmatic/hydrothermal and metamorphic activity in the Gällivare area: Re-Os dating of molybdenite and U-Pb dating of titanite from the Aitik Cu-Au-Ag deposit, northern Sweden

    NASA Astrophysics Data System (ADS)

    Wanhainen, Christina; Billström, Kjell; Martinsson, Olof; Stein, Holly; Nordin, Roger

    2005-12-01

    Host rocks to the Aitik Cu-Au-Ag deposit in northern Sweden are strongly altered and deformed Early Proterozoic mica(-amphibole) schists and gneisses. The deposit is characterised by numerous mineralisation styles, vein and alteration types. Four samples were selected for Re-Os molybdenite dating and 12 samples for U-Pb titanite dating in order to elucidate the magmatic/hydrothermal and metamorphic history following primary ore deposition in the Aitik Cu-Au-Ag deposit. Samples represent dyke, vein and alteration assemblages from the ore zone, hanging wall and footwall to the deposit. Re-Os dating of molybdenite from deformed barite and quartz veins yielded ages of 1,876±10 Ma and 1,848±8 Ma, respectively. A deformed pegmatite dyke yielded a Re-Os age of 1,848±6 Ma, and an undeformed pegmatite dyke an age of 1,728±7 Ma. U-Pb dating of titanite from a diversity of alteration mineral associations defines a range in ages between 1,750 and 1,805 Ma with a peak at ca. 1,780 Ma. The ages obtained, together with previous data, bracket a 160-Ma (1,890-1,730 Ma) time span encompassing several generations of magmatism, prograde to peak metamorphism, and post-peak cooling; events resulting in the redistribution and addition of metals to the deposit. This multi-stage evolution of the Aitik ore body suggests that the deposit was affected by several thermal events that ultimately produced a complex ore body. The Re-Os and U-Pb ages correlate well with published regional Re-Os and U-Pb age clusters, which have been tied to major magmatic, hydrothermal, and metamorphic events. Primary ore deposition at ca. 1,890 Ma in connection with intrusion of Haparanda granitoids was followed by at least four subsequent episodes of metamorphism and magmatism. Early metamorphism at 1,888-1,872 Ma overlapping with Haparanda (1,890-1,880 Ma) and Perthite-monzonite (1,880-1,870 Ma) magmatism clearly affected the Aitik area, as well as late metamorphism and Lina magmatism at 1,810-1,774 Ma and

  1. Impacts of anthropogenic pressures on the water quality of the Gironde Estuary (SW France) from the Urban Agglomeration of Bordeaux: spatial characterization and inputs of trace metal elements (Ag, As, Cd, Cu, Pb and Zn)

    NASA Astrophysics Data System (ADS)

    Kessaci, Kahina; Coynel, Alexandra; Blanc, Gérard; Deycard, Victoria N.; Derriennic, Hervé; Schäfer, Jörg

    2014-05-01

    Recent European legislation (2000/60/CE) has listed eight trace metal elements as priority toxic substances for water quality. Urban metal inputs into hydrosystems are of increasing interest to both scientists and managers facing restrictive environmental protection policies, population increase and changing metal applications. The Gironde Estuary (SW France; 625 km2) is known for its metal/metalloid pollution originating from industrial (e.g. Cd, Zn, Cu, As, Ag, Hg) or agricultural sources (e.g. Cu) in the main fluvial tributaries (Garonne and Dordogne Rivers). However, little peer-reviewed scientific work has addressed the impact of urban sources on the Gironde Estuary, especially the Urban Agglomeration of Bordeaux (~1 million inhabitants) located on the downstream branch of the Garonne River. In this study, a snapshot sampling campaign was performed in 2011 for characterizing the spatial distribution of dissolved and particulate metal/metalloid (As, Ag, Cd, Pb, Zn, Cu) concentrations in three suburban watersheds: the Jalle of Blanquefort (330 km2), Eau Bourde (140 km2), and Peugue (112 km2). Furthermore, particulate metal Enrichment Factors (EF) were calculated using local geochemical background measured at the bottom of a sediment core (492 cm). Results indicated that metal concentrations displayed a high spatial variability depending on the suburban watershed and the studied element. Local concentrations anomalies were observed for: (i) As in the Eau Bourde River in dissolved (4.2 μg/l) and particulate phases (246 mg/kg; EF= 20) and attributed to a nearby industrial incinerator; (ii) Zn in the Peugue River with maximum dissolved and particulate concentrations of 87 μg/l and 1580 mg/kg (EF=17), respectively, probably due to urban habitation runoff; (iii) Ag in the Jalle of Blanquefort River with high dissolved (74 ng/l) and particulate concentrations (33.7 mg/kg; EF=117) due to industrial activities in the downstream part. Based on hydro

  2. 3D modelling and sheath folding at the Falun pyritic Zn-Pb-Cu-(Au-Ag) sulphide deposit and implications for exploration in a 1.9 Ga ore district, Fennoscandian Shield, Sweden

    NASA Astrophysics Data System (ADS)

    Kampmann, Tobias C.; Stephens, Michael B.; Weihed, Pär

    2016-06-01

    Altered and mineralized rocks at the Falun pyritic Zn-Pb-Cu-(Au-Ag) sulphide deposit, situated in the Palaeoproterozoic Bergslagen ore district in the south-western part of the Fennoscandian Shield, have been metamorphosed at low-pressure, amphibolite-facies conditions and affected by ductile deformation. Using combined surface mapping of lithology and structure, drill core logging and microstructural work, the polyphase (D1 and D2) ductile deformation is demonstrated and a 3D model for the deposit created. Mineral associations include quartz, biotite, cordierite, anthophyllite, and minor almandine, andalusite and chlorite in silicate-rich altered rock, calcite or dolomite in marble and tremolite-actinolite or diopside-hedenbergite in skarn. The silicate minerals show varying growth patterns during the different phases of the tectonothermal evolution, with considerable static grain growth occurring between D1 and D2, and even after D2. F2 sheath folding along axes that plunge steeply to the SSE, parallel to a mineral stretching lineation and the dip direction of the S2 foliation, is suggested as a key deformation mechanism forming steeply plunging, cone- to rod-shaped mineralized bodies. This contrasts with a previous structural model invoking fold interference. A major shear zone with talc-chlorite-(quartz-biotite) mineral association separates the northern and southern structural domains at the deposit and bounds the polymetallic massive sulphides to the north.

  3. 3D modelling and sheath folding at the Falun pyritic Zn-Pb-Cu-(Au-Ag) sulphide deposit and implications for exploration in a 1.9 Ga ore district, Fennoscandian Shield, Sweden

    NASA Astrophysics Data System (ADS)

    Kampmann, Tobias C.; Stephens, Michael B.; Weihed, Pär

    2016-01-01

    Altered and mineralized rocks at the Falun pyritic Zn-Pb-Cu-(Au-Ag) sulphide deposit, situated in the Palaeoproterozoic Bergslagen ore district in the south-western part of the Fennoscandian Shield, have been metamorphosed at low-pressure, amphibolite-facies conditions and affected by ductile deformation. Using combined surface mapping of lithology and structure, drill core logging and microstructural work, the polyphase (D1 and D2) ductile deformation is demonstrated and a 3D model for the deposit created. Mineral associations include quartz, biotite, cordierite, anthophyllite, and minor almandine, andalusite and chlorite in silicate-rich altered rock, calcite or dolomite in marble and tremolite-actinolite or diopside-hedenbergite in skarn. The silicate minerals show varying growth patterns during the different phases of the tectonothermal evolution, with considerable static grain growth occurring between D1 and D2, and even after D2. F2 sheath folding along axes that plunge steeply to the SSE, parallel to a mineral stretching lineation and the dip direction of the S2 foliation, is suggested as a key deformation mechanism forming steeply plunging, cone- to rod-shaped mineralized bodies. This contrasts with a previous structural model invoking fold interference. A major shear zone with talc-chlorite-(quartz-biotite) mineral association separates the northern and southern structural domains at the deposit and bounds the polymetallic massive sulphides to the north.

  4. Reliability of Sn/Pb and lead-free (SnAgCu) solders of surface mounted miniaturized passive components for extreme temperature (-185°C to +125°C) space missions

    NASA Astrophysics Data System (ADS)

    Ramesham, Rajeshuni

    2011-02-01

    Surface mount electronic package test boards have been assembled using tin/lead (Sn/Pb) and lead-free (Pb-free or SnAgCu or SAC305) solders. The soldered surface mount packages include ball grid arrays (BGA), flat packs, various sizes of passive chip components, etc. They have been optically inspected after assembly and subsequently subjected to extreme temperature thermal cycling to assess their reliability for future deep space, long-term, extreme temperature environmental missions. In this study, the employed temperature range (-185°C to +125°C) covers military specifications (-55°C to +100°C), extreme cold Martian (-120°C to +115°C), asteroid Nereus (-180°C to +25°C) and JUNO (-150°C to +120°C) environments. The boards were inspected at room temperature and at various intervals as a function of extreme temperature thermal cycling and bake duration. Electrical resistance measurements made at room temperature are reported and the tests to date have shown some change in resistance as a function of extreme temperature thermal cycling and some showed increase in resistance. However, the change in interconnect resistance becomes more noticeable with increasing number of thermal cycles. Further research work will be carried out to understand the reliability of packages under extreme temperature applications (-185°C to +125°C) via continuously monitoring the daisy chain resistance for BGA, Flat-packs, lead less chip packages, etc. This paper will describe the experimental reliability results of miniaturized passive components (01005, 0201, 0402, 0603, 0805, and 1206) assembled using surface mounting processes with tin-lead and lead-free solder alloys under extreme temperature environments.

  5. Reliability of Sn/Pb and Lead-Free (SnAgCu) Solders of Surface Mounted Miniaturized Passive Components for Extreme Temperature (-185 C to +125 C) Space Missions

    NASA Technical Reports Server (NTRS)

    Ramesham, Rajeshuni

    2011-01-01

    Surface mount electronic package test boards have been assembled using tin/lead (Sn/Pb) and lead-free (Pb-free or SnAgCu or SAC305) solders. The soldered surface mount packages include ball grid arrays (BGA), flat packs, various sizes of passive chip components, etc. They have been optically inspected after assembly and subsequently subjected to extreme temperature thermal cycling to assess their reliability or future deep space, long-term, extreme temperature environmental missions. In this study, the employed temperature range (-185oC to +125oC) covers military specifications (-55oC to +100oC), extreme old Martian (-120oC to +115oC), asteroid Nereus (-180oC to +25oC) and JUNO (-150oC to +120oC) environments. The boards were inspected at room temperature and at various intervals as a function of extreme temperature thermal cycling and bake duration. Electrical resistance measurements made at room temperature are reported and the tests to date have shown some change in resistance as a function of extreme temperature thermal cycling and some showed increase in resistance. However, the change in interconnect resistance becomes more noticeable with increasing number of thermal cycles. Further research work will be carried out to understand the reliability of packages under extreme temperature applications (-185oC to +125oC) via continuously monitoring the daisy chain resistance for BGA, Flat-packs, lead less chip packages, etc. This paper will describe the experimental reliability results of miniaturized passive components (01005, 0201, 0402, 0603, 0805, and 1206) assembled using surface mounting processes with tin-lead and lead-free solder alloys under extreme temperature environments.

  6. Geochemistry of the Patricia Zn-Pb-Ag Deposit (paguanta, NE Chile)

    NASA Astrophysics Data System (ADS)

    Chinchilla Benavides, D.; Merinero Palomares, R.; Piña García, R.; Ortega Menor, L.; Lunar Hernández, R.

    2013-12-01

    The Patricia Zn-Pb-Ag ore deposit is located within the Paguanta mining project, situated at the northern end of the Andean Oligocene Porphyry Copper Belt of Chile. The sulfide mineralization occurs as W-E oriented veins hosted in volcanic rocks, mainly andesite (pyroclastic, ash and lavas), of Upper Cretaceous to Middle Tertiary age. The ore mineralogy (obtained by EMPA analyses) comprises in order of abundance, pyrite, sphalerite (5.5 - 10.89 wt % Fe, 9.8-19 % molar FeS and 0.52 wt % Cd), galena, arsenopyrite, chalcopyrite and Ag-bearing sulfosalts. The veins show a zoned and banded internal structure with pyrite at the edges and sphalerite in the center. The Ag occurs mostly as Ag-Cu-Sb sulfosalts, in order of abundance: series freibergite - argentotennantite -polybasite and stephanite. Other minor Ag phases such as argentite, pyrargirite and diaphorite were also identified. These Ag phases are typically associated with the base-metal sulfides. Freibergite occurs filling voids within sphalerite, chalcopyrite and at the contact between sphalerite and galena. Polybasite, stephanite, pyrargirite and argentite are mostly in close association with freibergite. In the case of diaphorite, it commonly occurs filling voids between galena crystals or as inclusions within galena. Some minor Ag-bearing sulfosalts are also identified between pyrite crystals. The alteration minerals are dominated by chlorite, illite and kaolinite. The gangue minerals consist of quartz and carbonates identified by XRD as kutnahorite. We obtained linear correlation statistically significant only for Ag, As Au, Cd, Cu, Pb, Sb and Zn and therefore we generated an enhanced scatter plot matrix of these elements. Bulk rock analyses (ICP/MS and XRF) of drill cores show that Ag is strongly and positively correlated with Pb and As, moderately with Cd, Sb, Au and Zn and weakly with Cu, while Au is moderately and positively correlated with Ag, As, Cd, Sb and Zn and weakly with Cu and Pb. These results

  7. Yield strength of Cu and an engineered material of Cu with 1% Pb

    NASA Astrophysics Data System (ADS)

    Buttler, William; Gray, George, III; Fensin, Saryu; Grover, Mike; Stevens, Gerald; Stone, Joseph; Turley, William

    2015-06-01

    To study the effects of engineered elastic-plastic yield on the mass-ejection from shocked materials we fielded explosively driven Cu and CuPb experiments. The Cu and CuPb experiments fielded fully annealed disks in contact with PBX 9501; the CuPb was extruded with 1% Pb that aggregates at the Cu grain boundaries. The elastic-plastic yield strength is explored as a difference of ejecta production of CuPb versus Cu, where the ejecta production of solid materials ties directly to the surface perturbation geometries of wavelengths (fixed at 65 μm) and amplitudes (which were varied). We observed that the Cu performs as expected, with ejecta turning on at the previously observed yield threshold, but the CuPb ejects mass in much larger quantities, at much lower wavenumber (k = 2 π/ λ) amplitude (h) products (kh), implying a reduced elastic-plastic yield stress of the engineered material, CuPb.

  8. The effect of a large amount of Ag introduced into the Bi1.84Pb0.34Sr1.91Ca2.03Cu3.06O10+δ (110 K phase) high-Tc superconductor

    NASA Astrophysics Data System (ADS)

    Song, Ki Young; Lee, Min Soo

    2006-12-01

    We synthesized a 50 wt% Ag-doped Bi-110 K phase high-Tc superconductor by a solid state reaction method. The nominal composition of the 110 K phase was Bi1.84Pb0.34Sr1.91Ca2.03Cu3.06O10+δ, which was prepared from powders of Bi2O3 (99.99%), PbO (99.99%), SrCO3 (99.99%), CaCO3 (99.99%) and CuO (99.99%). The synthesized Bi single-phase high-Tc superconductor was pulverized and mixed with Ag powder amounting to 50 wt%. Then the 50 wt% Ag-doped composition was sintered between 830 and 850 °C, and the superconducting properties, such as the structural characteristics, critical temperature (Tc), grain size and the mapping image of the surface were investigated. The critical temperature was about 99 K, independent of the sintering temperature in the range from 830 to 850 °C, and most superconducting grains were sintered in the layer near the surface, while Ag particles were aggregated and sintered as clusters and mostly distributed over an inside layer during the sintering process.

  9. Effect of Ag and Pb Addition on Microstructural and Mechanical Properties of SAC 105 Solders

    NASA Astrophysics Data System (ADS)

    Molnar, Aliz; Janovszky, Dora; Kardos, Ibolya; Molnar, Istvan; Gacsi, Zoltan

    2015-10-01

    Melting and crystallization processes of lead-free and lead-contaminated alloys in near-equilibrium state were investigated. In addition, the effect of silver content up to 4 wt.% on the microstructure of Sn-Ag-Cu alloys was studied. The volume fraction of β-Sn decreased by half owing to 4 wt.% Ag content. Furthermore, contamination by lead strongly influences the properties of the solidified microstructure. The Pb grains appear as a result of two processes when the Pb content is equal to 0.5 wt.% or higher: Pb phase solidifies in the quaternary eutectic at 176°C, and Pb grains precipitate from the primary β-Sn solid solution grain during a solid state reaction. The freezing range enlarges to 51°C due to 2 wt.% Pb content owing to quaternary eutectic. Above 1 wt.% Pb content, the mechanical properties also improve due to grains of quaternary eutectic Pb and precipitated Pb grains with a size <1 μm.

  10. Dendritic solidification of undercooled Cu-20%Pb hypomonotectic alloy

    SciTech Connect

    Dong, C.; Wei, B.

    1996-05-15

    The Cu-Pb monotectic system is the basis of an important category of wear-resistant materials especially bearing alloys. Its industrially interesting composition ranges from 10 to 50%Pb. In order to produce aligned composites or homogeneous dispersions, extensive research has been performed to investigate the solidification mechanism of Cu-Pb monotectic alloys under directional solidification or microgravity conditions. The preliminary nature of the current space experiments on Cu-Pb monotectic solidification excludes the possibility to draw any really definite conclusions about the influences of microgravity. In contrast, so far still little has been known about the undercooling behavior and rapid solidification kinetics of Cu-Pb monotectic alloys. The objective of the present work is to undercool bulk samples of Cu-Pb alloys to a significant extent and investigate their subsequent rapid solidification process. and this paper reports the related results obtained for Cu-20%Pb hypomonotectic alloy.

  11. Synthesis of Cu-Ag@Ag particles using hyperbranched polyester as template

    NASA Astrophysics Data System (ADS)

    Han, Wen-Song

    2015-07-01

    In this manuscript, the third-generation hyperbranched polyester was synthesized with 2, 2-dimethylol propionic acid as AB2 monomer and pentaerythrite as core molecule by using step by step polymerization process at first. Then, the Cu-Ag particles were prepared by co-reduction of silver nitrate and copper nitrate with ascorbic acid in the aqueous solution using hyperbranched polyester as template. Finally, the Cu-Ag@Ag particles were prepared by coating silver on the surface of Cu-Ag particles by reduction of silver nitrate. The synthesized hyperbranched polyester and Cu-Ag@Ag particles were characterized by Fourier transform infrared (FT-IR) spectroscopy, UV-vis spectra, x-ray diffraction, Laser light scattering, thermogravimetric analysis (TGA) and SEM. UV-vis spectra results showed that the Cu-Ag@Ag particles had a strong absorption band at around 420 nm. Laser light scattering and SEM studies confirmed that the most frequent particle sizes of Cu-Ag@Ag particles were 1.2 um. TGA results indicated that the Cu-Ag@Ag particles had good thermal stability. [Figure not available: see fulltext.

  12. Genesis of the Bangbule Pb-Zn-Cu polymetallic deposit in Tibet, western China: Evidence from zircon U-Pb geochronology and S-Pb isotopes

    NASA Astrophysics Data System (ADS)

    Kan, Tian; Zheng, Youye; Gao, Shunbao

    2016-04-01

    The Banbule Pb-Zn-Cu skarn deposit is located in the Longger-Gongbujiangda volcanic magma arc in the Gangdese-Nyainqentanglha Plate. It is the only lead-zinc polymetallic deposit discovered in the westernmost Nyainqentanglha metallogenic belt. The measured and indicated resources include 0.9 Mt of Pb+Zn (4.77% Pb and 4.74% Zn, respectively), 6499 t of Cu, and 178 t of Ag (18.75g/t Ag). The orebodies mainly occur as lenses, veins and irregular shapes in the contact zone between the quartz-porphyry and limestone of the Upper Permian Xiala Formation, or in the boundaries between limestone and sandstone. Pb-Zn-Cu mineralization in the Banbule deposit is closely associated with skarns. The ore minerals are dominated by galena, sphalerite, chalcopyrite, bornite, and magnetite, with subordinate pyrite, malachite, and azurite. The gangue minerals are mainly garnet, actinolite, diopside, quartz, and calcite. The ore-related quartz-porphyry displays LA-ICP-MS zircon U-Pb age of 77.31±0.74 Ma. The δ34S values of sulfides define a narrow range of -0.8 to 4.7‰ indicating a magmatic source for the ore-forming materials. Lead isotopic systematics yield 206Pb/204Pb of 18.698 to 18.752, 207Pb/204Pb of 15.696 to 15.760, and 208Pb/204Pb of 39.097 to 39.320. The data points are constrained around the growth curves of upper crust and orogenic belt according to the tectonic discrimination diagrams. The calculated Δβ ‑ Δγ values plot within the magmatic field according to the discrimination diagram of Zhu et al. (1995). The S-Pb isotopic data suggest that Bangbule is a typical skarn deposit, and the Pb-Zn-Cu mineralization is genetically related to the quartz-porphyry in the mining district. The discovery of the Bangbule deposit indicates that there is metallogenic potential in the westernmost Nyainqentanglha belt, which is of great importance for the exploration work in this area.

  13. Processing of nanoporous Ag layers by potential-controlled displacement (PCD) of Cu.

    PubMed

    Viyannalage, L T; Liu, Y; Dimitrov, N

    2008-08-01

    A cementation-like process taking place under potential control and introduced in this work as a "potential-controlled displacement" (PCD) is developed as a new method for processing of nanoporous Ag structures with controlled roughness (porosity) length scales. Most of the development work is done in a deoxygenated electrolyte containing 1 x 10(-3) M AgClO(4 )+ 5 x 10(-2) M CuSO(4) + 1 x 10(-1) M HClO(4) using a copper rotating disk electrode at 50 rpm. At this electrolyte concentration, the Ag deposition is under diffusion limitations whereas the Cu dissolution displays a typical Butler-Volmer anodic behavior. Thus, a careful choice of the operational current density enables strict control of the ratio between the dissolving and depositing metals as ascertained independently by atomic absorption spectrometry (AAS). The roughness length scale of the resulting surfaces is controlled by a careful selection of the current density applied. The highest surface area and finest morphology is obtained when the atomic ratio of Ag deposition and Cu dissolution becomes 1:1. Preseeding of uniform Ag clusters on the Cu surface made by pulse plating of Ag along with complementary plating and stripping of Pb monolayer is found to yield finer length scale resulting in up to a 67% higher surface area. An electrochemical technique using as a reference value the charge of an underpotentially deposited Pb layer on a flat Ag surface is used for measuring the real surface area. Scanning electron microscopy (SEM) studies are conducted to examine and characterize the deposit morphology of Ag grown by PCD on Cu substrates. PMID:18613704

  14. Critical elements in sediment-hosted deposits (clastic-dominated Zn-Pb-Ag, Mississippi Valley-type Zn-Pb, sedimentary rock-hosted Stratiform Cu, and carbonate-hosted Polymetallic Deposits): A review: Chapter 12

    USGS Publications Warehouse

    Marsh, Erin; Hitzman, Murray W.; Leach, David L.

    2016-01-01

    Some sediment-hosted base metal deposits, specifically the clastic-dominated (CD) Zn-Pb deposits, carbonate-hosted Mississippi Valley-type (MVT) deposits, sedimentary-rock hosted stratiform copper deposits, and carbonate-hosted polymetallic (“Kipushi type”) deposits, are or have been important sources of critical elements including Co, Ga, Ge, and Re. The generally poor data concerning trace element concentrations in these types of sediment-hosted ores suggest that there may be economically important concentrations of critical elements yet to be recognized.

  15. Sn-Ag-Cu Nanosolders: Solder Joints Integrity and Strength

    NASA Astrophysics Data System (ADS)

    Roshanghias, Ali; Khatibi, Golta; Yakymovych, Andriy; Bernardi, Johannes; Ipser, Herbert

    2016-08-01

    Although considerable research has been dedicated to the synthesis and characterization of lead-free nanoparticle solder alloys, only very little has been reported on the reliability of the respective joints. In fact, the merit of nanoparticle solders with depressed melting temperatures close to the Sn-Pb eutectic temperature has always been challenged when compared with conventional solder joints, especially in terms of inferior solderability due to the oxide shell commonly present on the nanoparticles, as well as due to compatibility problems with common fluxing agents. Correspondingly, in the current study, Sn-Ag-Cu (SAC) nanoparticle alloys were combined with a proper fluxing vehicle to produce prototype nanosolder pastes. The reliability of the solder joints was successively investigated by means of electron microscopy and mechanical tests. As a result, the optimized condition for employing nanoparticles as a competent nanopaste and a novel procedure for surface treatment of the SAC nanoparticles to diminish the oxide shell prior to soldering are being proposed.

  16. Sn-Ag-Cu Nanosolders: Solder Joints Integrity and Strength

    NASA Astrophysics Data System (ADS)

    Roshanghias, Ali; Khatibi, Golta; Yakymovych, Andriy; Bernardi, Johannes; Ipser, Herbert

    2016-05-01

    Although considerable research has been dedicated to the synthesis and characterization of lead-free nanoparticle solder alloys, only very little has been reported on the reliability of the respective joints. In fact, the merit of nanoparticle solders with depressed melting temperatures close to the Sn-Pb eutectic temperature has always been challenged when compared with conventional solder joints, especially in terms of inferior solderability due to the oxide shell commonly present on the nanoparticles, as well as due to compatibility problems with common fluxing agents. Correspondingly, in the current study, Sn-Ag-Cu (SAC) nanoparticle alloys were combined with a proper fluxing vehicle to produce prototype nanosolder pastes. The reliability of the solder joints was successively investigated by means of electron microscopy and mechanical tests. As a result, the optimized condition for employing nanoparticles as a competent nanopaste and a novel procedure for surface treatment of the SAC nanoparticles to diminish the oxide shell prior to soldering are being proposed.

  17. New experiments elucidating the current limiting mechanisms of Ag-sheathed (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} tapes.

    SciTech Connect

    Anderson, J.W.; Babcock, S.E.; Cai, X.Y.; Dorris, S.E.; Feldmann, M.; Jiang, J.; Larbalestier, D.C.; Li, Q.; Parrell, J.A.; Parrella, R.; Polak, M.; Polyanskii, A.; Riley, G.N. Jr.; Rupich, M.; Wu, Y.

    1999-01-15

    Multiple current limiting mechanisms exist from the nanometer to millimeter scale in Ag-sheathed (Bi,Pb)-2223 tapes. Recent studies of the zero-field critical current density (J{sub c} (0T, 77K)), the irreversibility field (H*) and the crack microstructure elucidate these properties. We show that H*(77K) can vary significantly over the range {approximately}120-260 mT, independently of J{sub c} (0T, 77K). Cracks, actual or incipient, exist on the sub to several hundred micron scale. Surface magneto optical imaging of whole tapes, correlated to subsequent ultrasonic fracture analysis of. the bare 2223 filaments extracted by dissolving away the Ag shows that even composites having J{sub c} (0T, 77K) values of 60 kA/cm{sup 2} exhibit strong signs of unhealed rolling damage. These combined studies show that today's very best 2223 tapes are still far from full optimization.

  18. Temperature dependent effects during Ag deposition on Cu(110)

    SciTech Connect

    Taylor, T.N.; Muenchausen, R.E.; Hoffbauer, M.A.; Denier van der Gon, A.W.; van der Veen, J.F.; FOM-Instituut voor Atoom-en Molecuulfysica, Amsterdam )

    1989-01-01

    The composition, structure, and morphology of ultrathin films grown by Ag deposition on Cu(110) were monitored as a function of temperature using low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), and medium energy ion scattering (MEIS). Aligned backscattering measurements with 150 keV He ions indicate that the Ag resides on top of the Cu and there is no significant surface compound formation. Measurements with LEED show that the Ag is initially confined to the substrate troughs. Further deposition forces the Ag out of the troughs and results in a split c(2 {times} 4) LEED pattern, which is characteristic of a distorted Ag(111) monolayer template. As verified by both AES and MEIS measurements, postmonolayer deposition of Ag on Cu(110) at 300K leads to a pronounced 3-dimensional clustering. Ion blocking analysis of the Ag clusters show that the crystallites have a (110)-like growth orientation, implying that the Ag monolayer template undergoes a rearrangement. These data are confirmed by low temperature LEED results in the absence of clusters, which indicate that Ag multilayers grow from a Ag--Cu interface where the Ag is captured in the troughs. Changes observed in the film structure and morphology are consistent with a film growth mechanism that is driven by overlayer strain response to the substrate corrugation. 16 refs., 4 figs.

  19. {bold {ital In situ}} measurements of texture and phase development in (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}{endash}Ag tapes

    SciTech Connect

    Thurston, T.R.; Haldar, P.; Wang, Y.L.; Suenaga, M.; Jisrawi, N.M. |; Wildgruber, U.

    1997-04-01

    Hard x-rays from a synchrotron source were utilized in diffraction experiments performed at elevated temperatures (up to {approximately}870{degree}C) on (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Bi-2223) tapes {ital completely} encased in silver. The general behavior of the phase and texture development under typical processing conditions was determined, and the effects that several variations in processing conditions had on the phase and texture development were examined. These results and their implications for improving processing conditions are discussed. {copyright} {ital 1997 Materials Research Society.}

  20. Systematics of hydrothermal alteration at the volcanic-hosted Falun Zn-Pb-Cu-(Au-Ag) deposit - implications for ore genesis, structure and exploration in a 1.9 Ga ore district, Fennoscandian Shield, Sweden

    NASA Astrophysics Data System (ADS)

    Kampmann, Tobias C.; Jansson, Nils J.; Stephens, Michael B.; Majka, Jarosław

    2016-04-01

    The Palaeoproterozoic, volcanic-hosted Falun Zn-Pb-Cu-(Au-Ag) sulphide deposit was mined for base and precious metals during several centuries, until its closure in 1992. The deposit is located in a 1.9 Ga ore district in the Bergslagen lithotectonic unit, Fennoscandian Shield, south-central Sweden. Both the ores and their host rock underwent polyphase ductile deformation, and metamorphism under amphibolite facies and later retrograde conditions at 1.9-1.8 Ga (Svecokarelian orogenic system). This study has the following aims: (i) Classify styles and intensities of alteration in the hydrothermally altered zone at Falun; (ii) identify precursor rocks to hydrothermally altered rocks and their spatial distribution at the deposit; (iii) evaluate the chemical changes resulting from hydrothermal alteration using mass change calculations; and (iv) assess the pre-metamorphic alteration assemblages accounting for the observed metamorphic mineral associations in the altered rocks at Falun. Results will have implications for both the ore-genetic and structural understanding of the deposit, as well as for local and regional exploration. Metamorphic mineral associations in the altered rocks include biotite-quartz-cordierite-(anthophyllite) and, more proximally, quartz-anthophyllite-(biotite-cordierite/almandine), biotite-cordierite-(anthophyllite) and biotite-almandine-(anthophyllite). The proximal hydrothermally altered zone corresponds to intense chlorite-style alteration. Subordinate dolomite or calcite marble, as well as calc-silicate (tremolite, diopside) rocks are also present at the deposit. Metavolcanic rocks around the deposit are unaltered, weakly sericitized or sodic-altered. Immobile-element (e.g. Zr, TiO2, Al2O3, REE) systematics of the silicate-rich samples at and around the deposit suggest that the precursors to the hydrothermally altered rocks at Falun were predominantly rhyolitic in composition, dacitic rocks being subordinate and mafic-intermediate rocks

  1. Classification of Broken Hill-Type Pb-Zn-Ag Deposits: A Refinement

    NASA Astrophysics Data System (ADS)

    Spry, P. G.; Teale, G. S.; Steadman, J. A.

    2009-05-01

    Broken Hill Hill-type Pb-Zn-Ag (BHT) deposits constitute some of the largest ore deposits in the world. The Broken Hill deposit is the largest accumulation of Pb, Zn, and Ag on Earth and the Cannington deposit is currently the largest silver deposit. Characteristic features of BHT deposits include: 1. high Pb+Zn+Ag values with Pb > Zn; 2. Metamorphism to amphibolite-granulite facies; 3. Paleo-to Mesoprotoerozoic clastic metasedimentary host rocks; 4. Sulfides that are spatially associated with bimodal (felsic and mafic) volcanic rocks, and stratabound gahnite- and garnet-bearing rocks and iron formations, 5. Stacked orebodies with characteristic Pb:Zn:Ag ratios and skarn-like Fe-Mn-Ca-F gangue assemblages, and the presence of Cu, Au, Bi, As, and Sb; and 6. Sulfur-poor assemblages. Broken Hill (Australia) has a prominent footwall feeder zone whereas other BHT deposits have less obvious alteration zones (footwall garnet spotting and stratabound alteration haloes). Deposits previously regarded in the literature as BHT deposits are Broken Hill, Cannington, Oonagalabie, Menninie Dam, and Pegmont (Australia), Broken Hill, Swartberg, Big Syncline, and Gamsberg (South Africa), Zinkgruvan (Sweden), Sullivan, Cottonbelt, and Foster River (Canada), and Boquira (Brazil). Of these deposits, only the Broken Hill (Australia, South Africa), Pinnacles, Cannington, Pegmont, and Swartberg deposits are BHT deposits. Another BHT deposit includes the Green Parrot deposit, Jervois Ranges (Northern Territory). The Foster River, Gamsberg, and Sullivan deposits are considered to be "SEDEX deposits with BHT affinities", and the Oonagalabie, Green Mountain (Colorado), and Zinkgruvan are "VMS deposits with BHT affinities". In the Broken Hill area (Australia), Corruga-type Pb-Zn-Ag deposits occur in calc-silicate rocks and possess some BHT characteristics; the Big Syncline, Cottonbelt, Menninie Dam, and Saxberget deposits are Corruga-type deposits. SEDEX deposits with BHT affinities, VMS

  2. Nanoporous Ag prepared from the melt-spun Cu-Ag alloys

    NASA Astrophysics Data System (ADS)

    Li, Guijing; Song, Xiaoping; Sun, Zhanbo; Yang, Shengchun; Ding, Bingjun; Yang, Sen; Yang, Zhimao; Wang, Fei

    2011-07-01

    Nanoporous Ag ribbons with different morphology and porosity were achieved by the electrochemical corrosion of the melt-spun Cu-Ag alloys. The Cu-rich phase in the alloys was removed, resulting in the formation of the nanopores distributed across the whole ribbon. It is found that the structures, morphology and porosity of the nanoporous Ag ribbons were dependent on the microstructures of the parent alloys. The most of ligaments presented a rod-like shape due to the formation of pseudoeutectic microstructure in the melt-spun Cu 55Ag 45 and Cu 70Ag 30 alloys. For nanoporous Ag prepared from Cu 85Ag 15 alloys, the ligaments were camber-like because of the appearance of the divorced microstructures. Especially, a novel bamboo-grove-like structure could be observed at the cross-section of the nanoporous Ag ribbons. The experiment reveals that nanoporous Ag ribbons exhibited excellent enhancement of surface-enhanced Raman scattering (SERS) effect, but a slight difference existed due to the discrepancy of their morphology.

  3. Spectroscopic and electronic structure of the CuIn, AgIn, CuGa and AgGa diatomics

    NASA Astrophysics Data System (ADS)

    Oranges, T.; Musolino, V.; Toscano, M.; Russo, N.

    1990-06-01

    Electronic, geometrical and spectroscopic properties of heteronuclear CuIn, AgIn, CuGa and AgGa diatomics have been investigated employing LCGTO-MP-LSD method. For all the molecules the ground state has been found to be the1Σ one followed by3Π,1Π and3Σ low-lying electronic state respectively. The geometric and electronic parameters are in reasonable agreement with the available experimental data. The chemical bond in the molecules has a single bond character due to the valence bond couplings between the Cu 4 s (or Ag 5 s) and the Ga 4 p (or In 5 p) electrons.

  4. Melting curve of metals Cu, Ag and Au under pressure

    NASA Astrophysics Data System (ADS)

    Tam, Pham Dinh; Hoc, Nguyen Quang; Tinh, Bui Duc; Tan, Pham Duy

    2016-01-01

    In this paper, the dependence of the melting temperature of metals Cu, Ag and Au under pressure in the interval from 0 kbar to 40 kbar is studied by the statistical moment method (SMM). This dependence has the form of near linearity and the calculated slopes of melting curve are 3.9 for Cu, 5.7 for Ag and 6 for Au. These results are in good agreement with the experimental data.

  5. Effect of Ag doping and annealing on thermoelectric properties of PbTe

    SciTech Connect

    Bala, Manju Tripathi, T. S.; Avasthi, D. K.; Asokan, K.; Gupta, Srashti

    2015-06-24

    The present study reveals that annealing Ag doped PbTe thin films enhance thermoelectric properties. Phase formation was identified by using X-ray diffraction measurement. Annealing increases the crystallinity of both undoped and Ag doped PbTe. Electrical resistivity and thermoelectric power measurements are done using four probe and bridge method respectively. The increase in thermoelectric power of Ag doped PbTe is 29 % in comparison to undoped PbTe and it further increases to 34 % after annealing at 250{sup o} C for 1 hour whereas thermoelectric power increases by 14 % on annealing undoped PbTe thin films at same temperature.

  6. Ultra-Fast Synthesis for Ag2Se and CuAgSe Thermoelectric Materials

    NASA Astrophysics Data System (ADS)

    DUAN, H. Z.; LI, Y. L.; ZHAO, K. P.; QIU, P. F.; SHI, X.; CHEN, L. D.

    2016-06-01

    Ag2Se and CuAgSe have been recently reported as promising thermoelectric materials at room temperature. The traditional melting-annealing-sintering processes are used to grow Ag2Se and CuAgSe materials with the disadvantages of high costs of energy and time. In this work, phase-pure polycrystalline Ag2Se and CuAgSe compounds were synthesized from raw elemental powders directly by manual mixing followed by spark plasma sintering (MM-SPS) in a few minutes. The influence of SPS heating rate on the phase composition, microstructure, and thermoelectric properties, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were investigated. The zTs of 0.8 at 390 K and 0.6 at 450 K are obtained for Ag2Se and CuAgSe, respectively, which is comparable with the values in the materials prepared by the traditional method. Furthermore, this ultrafast sample synthesis can significantly save material synthesis time and thus has the obvious advantage for large-scale production.

  7. Surface Morphology Changes During Pb Deposition on Cu(100): Evidence for Surface Alloyed Cu(100)-c(2x2) Pb

    SciTech Connect

    PLASS,RICHARD A.; KELLOGG,GARY LEE

    2000-07-13

    Using Low Energy Electron Microscopy (LEEM), the authors have followed Cu(100) surface morphology changes during Pb deposition at different temperatures. Surface steps advance and 2-D islands nucleate and grow as deposited Pb first alloys, and then dealloys, on a 125 C Cu(100)surface. From LEEM images, they determine how much Cu is being displaced at each stage and find that the amount of material added to the top layer for a complete Pb/Cu(100) c(4x4) reconstruction (a surface alloy) is consistent with the expected c(4x4) Cu content of 0.5 monolayer. However, as the surface changes to the Pb/Cu(100) c(2x2) overlayer, they find that the displaced material from surface dealloying, 0.22ML, is more than a factor of two lower than expected based on a pure Pb c(2x2) overlayer. Further, they find that in the 70 to 130 C range the amount of Cu remaining in c(2x2) increases with increasing substrate temperature during the deposition, showing that surface Cu is alloyed with Pb in the c(2x2) structure at these temperatures. When holding the sample at 125 C, the transformation from the c(2x2) structure to the higher coverage c(5{radical}2 x{radical}2)R45{degree} overlayer structure displaces more Cu, confirming the c(2x2) surface alloy model. They also find the c(2x2) surface has characteristically square 2-D islands with step edges parallel to the (100) type crystallographic directions, whereas the c(5{radical}2 x{radical}2)R45{degree} structure has line-like features which run parallel to the dislocation double rows of this surface's atomic structure and which expand into 2-D islands upon coarsening.

  8. Polymeric heterometallic Pb-Ag iodometallates, iodoplumbates and iodoargentates with lanthanide complex cations as templates.

    PubMed

    Fang, Wang; Tang, Chunying; Chen, Ruihong; Jia, Dingxian; Jiang, Wenqing; Zhang, Yong

    2013-11-14

    Heterometallic Pb-Ag iodometallates [Ln(DMF)8]2Pb3Ag10I22 [Ln = Ce(1), Pr(2)] were prepared by the reactions of PbI2, AgNO3 and KI in dimethylformamide (DMF) templated by [Ln(DMF)8](3+) complexes formed in situ by stirring LnCl3 in DMF. The same reactions in the absence of AgNO3 or PbI2 afforded iodoplumbate [Pr(DMF)9]2[Pr(DMF)8]Pb11I31 (3), and iodoargentates [Ln(DMF)8]Ag6I9 [Ln = Ce(4), Pr(5)], respectively. Compounds 1 and 2 contain a ternary one-dimensional polymeric [Pb3Ag10I22](6-) anion self-assembled from five AgI4, one PbI6 and one PbI4 primary units via edge- and face-sharing. Twelve PbI6 octahedra are interlinked via sharing of common faces to generate a 1D zigzag [Pb11I31(9-)]n chain in 3, which represents a new member of iodoplumbate aggregates. In 4 and 5, three AgI4 tetrahedra connect through common edges to form the [Ag6I12](6-) building block. The [Ag6I12](6-) blocks are further interlinked by sharing common edges, resulting in the 1D [Ag6I9(3-)]n chain. Optical absorption spectra showed that the synthesized Ag-iodoplumbate and iodoplumbate have potential for being used as semiconductors. Our results show that heterometallic halometallate properties can be tuned by combining structural units with different symmetries, enabling the synthesis of specific functional materials. PMID:24005846

  9. Heat-induced spinodal decomposition of Ag-Cu nanoparticles.

    PubMed

    Sopoušek, Jiří; Zobač, Ondřej; Buršík, Jiří; Roupcová, Pavla; Vykoukal, Vít; Brož, Pavel; Pinkas, Jiří; Vřešt'ál, Jan

    2015-11-14

    Solvothermal synthesis was used for Ag-Cu nanoparticle (NP) preparation from metallo-organic precursors. The detailed NP characterization was performed to obtain information about nanoparticle microstructure and both phase and chemical compositions. The resulting nanoparticles exhibited chemical composition inside a FCC_Ag + FCC_Cu two-phase region. The microstructure study was performed by various methods of electron microscopy including high-resolution transmission electron microscopy (HRTEM) at an atomic scale. The HRTEM and X-ray diffraction studies showed that the prepared nanoparticles form the face centred cubic (FCC) crystal lattice where the silver atoms are randomly mixed with copper. The CALPHAD approach was used for predicting the phase diagram of the Ag-Cu system in both macro- and nano-scales. The predicted spinodal decomposition of the metastable Ag-Cu nanoparticles was experimentally induced by heating on an X-ray powder diffractometer (HT XRD). The nucleation of the Cu-rich phase was detected and its growth was studied. Changes in the Ag-rich phase were observed in situ by X-ray diffraction under vacuum. The heat treatment was conducted at different maximum temperatures up to 450 °C and the resulting particle product was analysed. The experiments were complemented by differential scanning calorimetry (DSC) measurements up to liquidus temperature. The start temperatures of the spinodal phase transformation and particle aggregation were evaluated. PMID:25929324

  10. Growth of nucleation sites on Pb-doped Bi2Sr2Ca1Cu2O8 + delta

    NASA Astrophysics Data System (ADS)

    Finnemore, D. K.; Xu, Ming; Kouzoudis, D.; Bloomer, T.; Kramer, M. J.; McKernan, Stuart; Balachandran, U.; Haldar, Pradeep

    1996-01-01

    In the growth of Bi2Sr2Ca2Cu3O10+δ from mixed powders of Pb-doped Bi2Sr2Ca1Cu2O8+δ and other oxides, it has been discovered that a dense array of hillocks or mesas grow at the interface between a Ag overlay and Pb-doped Bi2Sr2Ca1Cu2O8+δ grains during the ramp up to the reaction temperature. As viewed in an environmental scanning electron microscope, the Ag coated grains develop a texture that looks like ``chicken pox'' growing on the grains at about 700 °C. These hillocks are about 100 nm across and are spaced at about 500 to 1000 nm. If there is no Ag, this texture does not develop. Preliminary measurements indicate that the hillocks are a recrystallization of (Bi,Pb)2Sr2Ca1Cu2O8+δ, and are definitely not a Pb rich phase.

  11. Effect of Yttrium on the Fracture Strength of the Sn-1.0Ag-0.5Cu Solder Joints

    NASA Astrophysics Data System (ADS)

    Choi, Hyelim; Kaplan, Wayne D.; Choe, Heeman

    2016-04-01

    This is a preliminary investigation on the mechanical properties of Pb-free Sn-1.0Ag-0.5Cu solder joints containing 0.02 wt.% to 0.1 wt.% Y under a range of thermal aging and reflow conditions. Despite the significantly thicker intermetallic compound (IMC) formed at the solder joint, the 0.1 wt.% Y-doped joint exhibited a higher fracture strength than its baseline Sn-1.0Ag-0.5Cu counterpart under most aging and reflow conditions. This may be associated with the formation of Y-Cu IMCs formed at the interface between the solder and the Cu substrate, because the Y-Cu IMCs have recently been referred to as relatively `ductile' IMCs.

  12. Effect of Yttrium on the Fracture Strength of the Sn-1.0Ag-0.5Cu Solder Joints

    NASA Astrophysics Data System (ADS)

    Choi, Hyelim; Kaplan, Wayne D.; Choe, Heeman

    2016-07-01

    This is a preliminary investigation on the mechanical properties of Pb-free Sn-1.0Ag-0.5Cu solder joints containing 0.02 wt.% to 0.1 wt.% Y under a range of thermal aging and reflow conditions. Despite the significantly thicker intermetallic compound (IMC) formed at the solder joint, the 0.1 wt.% Y-doped joint exhibited a higher fracture strength than its baseline Sn-1.0Ag-0.5Cu counterpart under most aging and reflow conditions. This may be associated with the formation of Y-Cu IMCs formed at the interface between the solder and the Cu substrate, because the Y-Cu IMCs have recently been referred to as relatively `ductile' IMCs.

  13. Synthesis of Cu core Ag shell nanoparticles using chemical reduction method

    NASA Astrophysics Data System (ADS)

    Chinh Trinh, Dung; Dung Dang, Thi My; Khanh Huynh, Kim; Fribourg-Blanc, Eric; Chien Dang, Mau

    2015-01-01

    A simple chemical reduction method is used to prepare colloidal bimetallic Cu-Ag core-shell (Cu@Ag) nanoparticles. Polyvinyl pyrrolidone (PVP) was used as capping agent, and ascorbic acid (C6H8O6) and sodium borohydride (NaBH4) were used as reducing agents. The obtained Cu@Ag nanoparticles were characterized by powder x-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis spectrophotometry. The influence of [Ag]/[Cu] molar ratios on the formation of Ag coatings on the Cu particles was investigated. From the TEM results we found that the ratio [Ag+]/[Cu2+] = 0.2 is the best for the stability of Cu@Ag nanoparticles with an average size of 22 nm. It is also found out that adding ammonium hydroxide (NH4OH) makes the obtained Cu@Ag nanoparticles more stable over time when pure deionized water is used as solvent.

  14. Electrochemical synthesis of fractal bimetallic Cu/Ag nanodendrites for efficient surface enhanced Raman spectroscopy.

    PubMed

    Li, Da; Liu, Jingquan; Wang, Hongbin; Barrow, Colin J; Yang, Wenrong

    2016-09-21

    Here, we for the first time synthesized bimetallic Cu/Ag dendrites on graphene paper (Cu/Ag@G) using a facile electrodeposition method to achieve efficient SERS enhancement. Cu/Ag@G combined the electromagnetic enhancement of Cu/Ag dendrites and the chemical enhancement of graphene. SERS was ascribed to the rough metal surface, the synergistic effect of copper and silver nanostructures and the charge transfer between graphene and the molecules. PMID:27522964

  15. Precipitations in a dental Ag-Pd-Cu-Au alloy.

    PubMed

    Herø, H; Jørgensen, R; Sørbrøden, E; Suoninen, E

    1982-05-01

    The structure of a dental Ag-PD-Cu-Au alloy has been studied after centrifugal casting and various heat treatments. By transmission electron microscopy, a high density of small fct particles, assumed to be PdCu, was observed, but, in addition, finely-spaced rods of approximately equal to 0.05 micrometer (500 A) diameter with an fcc structure precipitated on the [100] planes of the matrix were found. On the basis of their structure and the pertaining lattice parameter, these rods are assumed to be Cu-rich. They could also be observed by scanning electron microscopy, but not at annealing temperatures lower than 425 degrees C. PMID:6953095

  16. Failure analysis of PB-1 (EBTS Be/Cu mockup)

    SciTech Connect

    Odegard, B.C. Jr.; Cadden, C.H.

    1996-11-01

    Failure analysis was done on PB-1 (series of Be tiles joined to Cu alloy) following a tile failure during a high heat flux experiment in EBTS (electron beam test system). This heat flux load simulated ambient conditions inside ITER; the Be tiles were bonded to the Cu alloy using low-temperature diffusion bonding, which is being considered for fabricating plasma facing components in ITER. Results showed differences between the EBTS failure and a failure during a room temperature tensile test. The latter occurred at the Cu-Be interface in an intermetallic phase formed by reaction of the two metals at the bonding temperature. Fracture strengths measured by these tests were over 300 MPa. The high heat flux specimens failed at the Cu-Cu diffusion bond. Fracture morphology in both cases was a mixed mode of dimple rupture and transgranular cleavage. Several explanations for this difference in failure mechanism are suggested.

  17. Diffusion of Cu adatoms and dimers on Cu(111) and Ag(111) surfaces

    NASA Astrophysics Data System (ADS)

    Mińkowski, Marcin; Załuska-Kotur, Magdalena A.

    2015-12-01

    Diffusion of Cu adatoms and dimers on Cu(111) and Ag(111) surfaces is analyzed based on ab initio surface potentials. Single adatom diffusion is compared with dimer diffusion on both surfaces. Surface geometry makes the adatoms jump alternately between two states in the same way in both systems, whereas dimers undergo more complex diffusion process that combines translational and rotational motion. Small difference in the surface lattice constant between Cu and Ag crystals results in a completely different energy landscape for dimer jumps. As an effect the character of diffusion process changes. Homogeneous Cu dimer diffusion is more difficult and dimers rather rotate within single surface cell, whereas diffusion over Ag surface is faster and happens more smoothly. The temperature dependence of diffusion coefficient and its parameters: energy barrier and prefactor is calculated and compared for both surfaces.

  18. Fabrication of Bi-(Pb)-Sr-Ca-Cu-O mono- and multifilamentary superconductors and improvement in critical current density

    NASA Astrophysics Data System (ADS)

    Sekine, H.; Inoue, K.; Maeda, H.; Numata, K.

    1989-09-01

    This paper describes procedures for the fabrication of the Bi-(Pb)-Sr-Ca-Cu-O superconducting material as tapes without sheathing and as multifilamentary wires and tapes with Ag sheathing, together with results from metallurgical studies and measurements of superconducting properties. Tape specimens of 0.5-1.0-mm thickness, prepared by combination and repetition of cold work and sintering, showed critical current density Jc as high as 5000 A/sq cm at 77 K, with good reproducibility and reliability. A 1330-filament Bi-Pb-Sr-Ca-Cu-O wire with an Ag sheath showed critical temperature of about 105 K, and a multifilamentary tape specimen showed Jc of 1050 A/sq cm at 77 K. The process of repetition of cold work and sintering had the effect of Jc enhancement on multifilamentary tapes.

  19. Microstructure of Cu-Ag Uniform Nanoparticulate Films on Polyurethane 3D Catheters: Surface Properties.

    PubMed

    Rtimi, Sami; Sanjines, Rosendo; Pulgarin, Cesar; Kiwi, John

    2016-01-13

    The preparation, characterization, and antibacterial testing of Cu-Ag sputtered polyurethane (PU) catheters are addressed in this study. PU catheters with different atomic ratios Cu:Ag have been sputtered and led to different optical properties as followed by diffuse reflectance spectroscopy (DRS) and the surface redox properties were also different for different Cu-Ag ratios as observed by X-ray photoelectron spectroscopy (XPS). The surface atomic percentage concentration of the oxidized/reduced C-species originating from bacterial cultures before and after bacterial inactivation were determined on the Cu-Ag PU catheters. The crystallographic properties were determined by X-ray diffraction (XRD). The XRD-diffractogram showed the presence of Cu2O (111), Cu (200), CuO (020), and Ag (111) indicating that Cu nanoparticles present a more crystalline character compared to Ag nanoparticles. Increasing the percentage of Ag in the Cu-Ag films, bigger Ag-particle agglomerates were detected by scanning transmission electron microscopy (STEM) microanalysis confirming the results obtained by AFM. The bacterial inactivation kinetics of the sputtered Cu-Ag films on PU catheters was investigated in detail. Quasi-instantaneous bacterial inactivation kinetics was induced by the sputtered films on PU catheters after optimization of the Cu-Ag film thickness. PMID:26700113

  20. Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials

    SciTech Connect

    Wu, Hsin-jay; Chen, Sinn-wen; Foo, Wei-jian; Jeffrey Snyder, G.

    2012-07-09

    Nanostructured Ag-Pb-Te thermoelectric materials were fabricated by unidirectionally solidifying the ternary Ag-Pb-Te eutectic and near-eutectic alloys using the Bridgeman method. Specially, the Bridgman-grown eutectic alloy exhibited a partially aligned lamellar microstructure, which consisted of Ag{sub 5}Te{sub 3} and Te phases, with additional 200-600 nm size particles of PbTe. The self-assembled interfaces altered the thermal and electronic transport properties in the bulk Ag-Pb-Te eutectic alloy. Presumably due to phonon scattering from the nanoscale microstructure, a low thermal conductivity ({kappa} = 0.3 W/mK) was achieved of the eutectic alloy, leading to a zT peak of 0.41 at 400 K.

  1. Photoluminescence of SrS:Cu,Ag and SrS 1- xSe x:Cu,Ag thin films

    NASA Astrophysics Data System (ADS)

    Poelman, D.; Wauters, D.; Van Meirhaeghe, R. L.; Cardon, F.

    2000-01-01

    The photoluminescence (PL) of SrS:Cu,Ag and SrS 1- xSe x:Cu,Ag thin films has been investigated. The influence of rapid thermal annealing conditions and Cu dopant concentration on the PL intensity has been studied. The PL emission spectrum was measured as a function of both Cu concentration and temperature. An unexpected PL intensity peak was observed around a temperature of 54 K.

  2. Recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Cu or Ag

    SciTech Connect

    Rodriguez-Alvarez, Humberto; Mainz, Roland; Marsen, Bjoern; Schock, Hans-Werner

    2010-04-15

    We monitor the recrystallization of Cu-poor CuInS{sub 2} thin films assisted by pure Cu or pure Ag by means of real-time synchrotron-based polychromatic X-ray diffraction. In both cases a new microstructure is formed accompanied by an increase in grain size. In the case of Cu, the onset temperature of the thin-film recrystallization is higher than 370 deg. C. In the case of Ag, the thin-film recrystallization comes to an end at 270 deg. C. The Ag-assisted recrystallization occurs in the presence of the body-centered cubic beta-Ag{sub 2}S phase. We find that domain growth and diffusion of silver into the film occur simultaneously. - Graphical abstract Keywords: Recrystallization; Thin-film solar cells; Energy-dispersive x-ray diffraction: In-situ monitoring by means of energy-dispersive X-ray diffraction of the thin-film recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Ag.

  3. Defects responsible for abnormal n-type conductivity in Ag-excess doped PbTe thermoelectrics

    SciTech Connect

    Ryu, Byungki Lee, Jae Ki; Lee, Ji Eun; Joo, Sung-Jae; Kim, Bong-Seo; Min, Bok-Ki; Lee, Hee-Woong; Park, Su-Dong; Oh, Min-Wook

    2015-07-07

    Density functional calculations have been performed to investigate the role of Ag defects in PbTe thermoelectric materials. Ag-defects can be either donor, acceptor, or isovalent neutral defect. When Ag is heavily doped in PbTe, the neutral (Ag-Ag) dimer defect at Pb-site is formed and the environment changes to the Pb-rich/Te-poor condition. Under Pb-rich condition, the ionized Ag-interstitial defect (Ag{sub I}{sup +}) becomes the major donor. The formation energy of Ag{sub I}{sup +} is smaller than other native and Ag-related defects. Also it is found that Ag{sub I}{sup +} is an effective dopant. There is no additional impurity state near the band gap and the conduction band minimum. The charge state of Ag{sub I}{sup +} defect is maintained even when the Fermi level is located above the conduction band minimum. The diffusion constant of Ag{sub I}{sup +} is calculated based on the temperature dependent Fermi level, formation energy, and migration energy. When T > 550 K, the diffusion length of Ag within a few minutes is comparable to the grain size of the polycrystalline PbTe, implying that Ag is dissolved into PbTe and this donor defect is distributed over the whole lattice in Ag-excess doped polycrystalline PbTe. The predicted solubility of Ag{sub I}{sup +} well explains the increased electron carrier concentration and electrical conductivity reported in Ag-excess doped polycrystalline PbTe at T = 450–750 K [Pei et al., Adv. Energy Mater. 1, 291 (2011)]. In addition, we suggest that this abnormal doping behavior is also found for Au-doped PbTe.

  4. Au-Ag-Cu nano-alloys: tailoring of permittivity

    NASA Astrophysics Data System (ADS)

    Hashimoto, Yoshikazu; Seniutinas, Gediminas; Balčytis, Armandas; Juodkazis, Saulius; Nishijima, Yoshiaki

    2016-04-01

    Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective.

  5. Au-Ag-Cu nano-alloys: tailoring of permittivity

    PubMed Central

    Hashimoto, Yoshikazu; Seniutinas, Gediminas; Balčytis, Armandas; Juodkazis, Saulius; Nishijima, Yoshiaki

    2016-01-01

    Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective. PMID:27118459

  6. Au-Ag-Cu nano-alloys: tailoring of permittivity.

    PubMed

    Hashimoto, Yoshikazu; Seniutinas, Gediminas; Balčytis, Armandas; Juodkazis, Saulius; Nishijima, Yoshiaki

    2016-01-01

    Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective. PMID:27118459

  7. Formation of nanodots and enhancement of thermoelectric power induced by ion irradiation in PbTe:Ag composite thin films

    NASA Astrophysics Data System (ADS)

    Bala, Manju; Meena, Ramcharan; Gupta, Srashti; Pannu, Compesh; Tripathi, Tripurari S.; Varma, Shikha; Tripathi, Surya K.; Asokan, K.; Avasthi, Devesh K.

    2016-07-01

    Present study demonstrates an enhancement in thermoelectric power of 10% Ag doped PbTe (PbTe:Ag) thin films when irradiated with 200 keV Ar ion. X-ray diffraction showed an increase in crystallinity for both PbTe and PbTe:10Ag nano-composite films after Ar ion irradiation due to annealing of defects in the grain boundaries. The preferential sputtering of Pb and Te ions in comparison to Ag ions resulted in the formation of nano-dots. This was further confirmed by X-ray photoelectron spectroscopy (XPS). Such an enhancement in thermoelectric power of irradiated PbTe:10Ag films in comparison to pristine PbTe:10Ag film is attributed to the decrease in charge carrier concentration that takes part in the transport process via restricting the tunneling of carriers through the wider potential barrier formed at the interface of nano-dots.

  8. Comparison of Extensive Thermal Cycling Effects on Microstructure Development in Micro-alloyed Sn-Ag-Cu Solder Joints

    SciTech Connect

    Anderson, Iver E.; Boesenberg, Adam; Harringa, Joel; Riegner, David; Steinmetz, Andrew; Hillman, David

    2011-09-28

    Pb-free solder alloys based on the Sn-Ag-Cu (SAC) ternary eutectic have promise for widespread adoption across assembly conditions and operating environments, but enhanced microstructural control is needed. Micro-alloying with elements such as Zn was demonstrated for promoting a preferred solidification path and joint microstructure earlier in simple (Cu/Cu) solder joints studies for different cooling rates. This beneficial behavior now has been verified in reworked ball grid array (BGA) joints, using dissimilar SAC305 (Sn-3.0Ag-0.5Cu, wt.%) solder paste. After industrial assembly, BGA components joined with Sn-3.5Ag-0.74Cu-0.21Zn solder were tested in thermal cycling (-55 C/+125 C) along with baseline SAC305 BGA joints beyond 3000 cycles with continuous failure monitoring. Weibull analysis of the results demonstrated that BGA components joined with SAC + Zn/SAC305 have less joint integrity than SAC305 joints, but their lifetime is sufficient for severe applications in consumer, defense, and avionics electronic product field environments. Failure analysis of the BGA joints revealed that cracking did not deviate from the typical top area (BGA component side) of each joint, in spite of different Ag3Sn blade content. Thus, SAC + Zn solder has not shown any advantage over SAC305 solder in these thermal cycling trials, but other characteristics of SAC + Zn solder may make it more attractive for use across the full range of harsh conditions of avionics or defense applications.

  9. Preparation and Sintering Properties of Ag27Cu2Sn Nanopaste as Die Attach Material

    NASA Astrophysics Data System (ADS)

    Liu, Xiaojian; Liu, Wei; Wang, Chunqing; Zheng, Zhen; Kong, Lingchao

    2016-06-01

    Ag27Cu2Sn nanopaste has been prepared by mixing Ag, Cu, and Sn nanoparticles with an organic solvent system. Sintering and mechanical properties of this nanopaste were characterized and investigated. Effects of sintering temperature and time on the sintered microstructure of the nanopaste and shear strength of Cu/Ag27Cu2Sn/Cu structure were analyzed. The results showed that the organic shells coated on the outside of metal nanoparticles could effectively prevent metal nanoparticles from being oxidized below 480°C. When the paste was sintered at 480°C without pressure, few voids or large particles formed within the sintered layer and distributions of Ag, Cu, and Sn were quite uniform. This sintering temperature was much lower than the eutectic temperature (779°C) of Ag-Cu bulk material. Moreover, mutual solid solubilities of Ag and Cu were increased remarkably, which may be caused by high surface activity of Ag and Cu nanoparticles and the important role of the Sn addition. Shear strength of samples with Cu/Ag27Cu2Sn/Cu structure could reach 21 MPa, which could compare with that of Ag nanopaste or conductive adhesives.

  10. Properties of a new type Al/Pb-0.3%Ag alloy composite anode for zinc electrowinning

    NASA Astrophysics Data System (ADS)

    Yang, Hai-tao; Liu, Huan-rong; Zhang, Yong-chun; Chen, Bu-ming; Guo, Zhong-cheng; Xu, Rui-dong

    2013-10-01

    An Al/Pb-0.3%Ag alloy composite anode was produced via composite casting. Its electrocatalytic activity for the oxygen evolution reaction and corrosion resistance was evaluated by anodic polarization curves and accelerated corrosion test, respectively. The microscopic morphologies of the anode section and anodic oxidation layer during accelerated corrosion test were obtained by scanning electron microscopy. It is found that the composite anode (hard anodizing) displays a more compact interfacial combination and a better adhesive strength than plating tin. Compared with industrial Pb-0.3%Ag anodes, the oxygen evolution overpotentials of Al/Pb-0.3%Ag alloy (hard anodizing) and Al/Pb-0.3%Ag alloy (plating tin) at 500 A·m-2 were lower by 57 and 14 mV, respectively. Furthermore, the corrosion rates of Pb-0.3%Ag alloy, Al/Pb-0.3%Ag alloy (hard anodizing), and Al/Pb-0.3%Ag alloy (plating tin) were 13.977, 9.487, and 11.824 g·m-2·h-1, respectively, in accelerated corrosion test for 8 h at 2000 A·m-2. The anodic oxidation layer of Al/Pb-0.3%Ag alloy (hard anodizing) is more compact than Pb-0.3%Ag alloy and Al/Pb-0.3%Ag alloy (plating tin) after the test.

  11. Bioleaching mechanism of Zn, Pb, In, Ag, Cd and As from Pb/Zn smelting slag by autotrophic bacteria.

    PubMed

    Wang, Jia; Huang, Qifei; Li, Ting; Xin, Baoping; Chen, Shi; Guo, Xingming; Liu, Changhao; Li, Yuping

    2015-08-15

    A few studies have focused on release of valuable/toxic metals from Pb/Zn smelting slag by heterotrophic bioleaching using expensive yeast extract as an energy source. The high leaching cost greatly limits the practical potential of the method. In this work, autotrophic bioleaching using cheap sulfur or/and pyrite as energy matter was firstly applied to tackle the smelting slag and the bioleaching mechanisms were explained. The results indicated autotrophic bioleaching can solubilize valuable/toxic metals from slag, yielding maximum extraction efficiencies of 90% for Zn, 86% for Cd and 71% for In, although the extraction efficiencies of Pb, As and Ag were poor. The bioleaching performance of Zn, Cd and Pb was independent of leaching system, and leaching mechanism was acid dissolution. A maximum efficiency of 25% for As was achieved by acid dissolution in sulfursulfur oxidizing bacteria (S-SOB), but the formation of FeAsO4 reduced extraction efficiency in mixed energy source - mixed culture (MS-MC). Combined works of acid dissolution and Fe(3+) oxidation in MS-MC was responsible for the highest extraction efficiency of 71% for In. Ag was present in the slag as refractory AgPb4(AsO4)3 and AgFe2S3, so extraction did not occur. PMID:25996622

  12. Study of Cu and Pb partitioning in mine tailings using the Tessier sequential extraction scheme

    NASA Astrophysics Data System (ADS)

    Andrei, Mariana Lucia; Senila, Marin; Hoaghia, Maria Alexandra; Borodi, Gheorghe; Levei, Erika-Andrea

    2015-12-01

    The Cu and Pb partitioning in nonferrous mine tailings was investigated using the Tessier sequential extraction scheme. The contents of Cu and Pb found in the five operationally defined fractions were determined by inductively coupled plasma optical emission spectrometry. The results showed different partitioning patterns for Cu and Pb in the studied tailings. The total Cu and Pb contents were higher in tailings from Brazesti than in those from Saliste, while the Cu contents in the first two fractions considered as mobile were comparable and the content of mobile Pb was the highest in Brazesti tailings. In the tailings from Saliste about 30% of Cu and 3% of Pb were found in exchangeable fraction, while in those from Brazesti no metals were found in the exchangeable fraction, but the percent of Cu and Pb found in the bound to carbonate fraction were high (20% and 26%, respectively). The highest Pb content was found in the residual fraction in Saliste tailings and in bound to Fe and Mn oxides fraction in Brazesti tailings, while the highest Cu content was found in the fraction bound to organic matter in Saliste tailings and in the residual fraction in Brazesti tailings. In case of tailings of Brazesti medium environmental risk was found both for Pb and Cu, while in case of Saliste tailings low risk for Pb and high risk for Cu were found.

  13. Study of Cu and Pb partitioning in mine tailings using the Tessier sequential extraction scheme

    SciTech Connect

    Andrei, Mariana Lucia; Senila, Marin; Hoaghia, Maria Alexandra; Levei, Erika-Andrea; Borodi, Gheorghe

    2015-12-23

    The Cu and Pb partitioning in nonferrous mine tailings was investigated using the Tessier sequential extraction scheme. The contents of Cu and Pb found in the five operationally defined fractions were determined by inductively coupled plasma optical emission spectrometry. The results showed different partitioning patterns for Cu and Pb in the studied tailings. The total Cu and Pb contents were higher in tailings from Brazesti than in those from Saliste, while the Cu contents in the first two fractions considered as mobile were comparable and the content of mobile Pb was the highest in Brazesti tailings. In the tailings from Saliste about 30% of Cu and 3% of Pb were found in exchangeable fraction, while in those from Brazesti no metals were found in the exchangeable fraction, but the percent of Cu and Pb found in the bound to carbonate fraction were high (20% and 26%, respectively). The highest Pb content was found in the residual fraction in Saliste tailings and in bound to Fe and Mn oxides fraction in Brazesti tailings, while the highest Cu content was found in the fraction bound to organic matter in Saliste tailings and in the residual fraction in Brazesti tailings. In case of tailings of Brazesti medium environmental risk was found both for Pb and Cu, while in case of Saliste tailings low risk for Pb and high risk for Cu were found.

  14. [Synthesis of Cu2O-Ag-AgBr/MA visible photocatalyst and its performance in degradation of 2-chlorophenol].

    PubMed

    Wang, Ran; Zhou, Xue-feng; Hu, Xue-xiang; Hu, Chun

    2014-09-01

    Cu2O-Ag-AgBr/MA plasmon photocatalyst was prepared by the co-deposition of Cu2O and Ag-AgBr nanoparticles on mesoporous alumina (MA). The samples were characterized by means of X-ray diffraction (XRD) ,X-ray photoelectron spectroscopy (XPS) and diffuse reflectance UV-vis spectra (UV-vis DRS). The results showed that both Ag+ and Ag0 existed on the surface. The photocatalytic activity of the samples prepared were evaluated by degradation of 2-chlorophenol (2-CP) under visible light (λ >420 nm) irradiation. The results showed that the catalyst had high photocatalytic activity for the degradation of 2-CP. Meanwhile, the doping of Cu2O nanoparticles significantly inhibited the release of silver ions during the photocatalytic reaction, which improved the photostability of the catalyst. Analyses on the effects of various scavengers showed that h+ , O2- and OH radicals were the primary active species. PMID:25518659

  15. Modifying the Surface of a Rashba-Split Pb-Ag Alloy Using Tailored Metal-Organic Bonds.

    PubMed

    Stadtmüller, Benjamin; Seidel, Johannes; Haag, Norman; Grad, Lisa; Tusche, Christian; van Straaten, Gerben; Franke, Markus; Kirschner, Jürgen; Kumpf, Christian; Cinchetti, Mirko; Aeschlimann, Martin

    2016-08-26

    Hybridization-related modifications of the first metal layer of a metal-organic interface are difficult to access experimentally and have been largely neglected so far. Here, we study the influence of specific chemical bonds (as formed by the organic molecules CuPc and PTCDA) on a Pb-Ag surface alloy. We find that delocalized van der Waals or weak chemical π-type bonds are not strong enough to alter the alloy, while localized σ-type bonds lead to a vertical displacement of the Pb surface atoms and to changes in the alloy's surface band structure. Our results provide an exciting platform for tuning the Rashba-type spin texture of surface alloys using organic molecules. PMID:27610875

  16. Comparative Study of ENIG and ENEPIG as Surface Finishes for a Sn-Ag-Cu Solder Joint

    NASA Astrophysics Data System (ADS)

    Yoon, Jeong-Won; Noh, Bo-In; Jung, Seung-Boo

    2011-09-01

    Interfacial reactions and joint reliability of Sn-3.0Ag-0.5Cu solder with two different surface finishes, electroless nickel-immersion gold (ENIG) and electroless nickel-electroless palladium-immersion gold (ENEPIG), were evaluated during a reflow process. We first compared the interfacial reactions of the two solder joints and also successfully revealed a connection between the interfacial reaction behavior and mechanical reliability. The Sn-Ag-Cu/ENIG joint exhibited a higher intermetallic compound (IMC) growth rate and a higher consumption rate of the Ni(P) layer than the Sn-Ag-Cu/ENEPIG joint. The presence of the Pd layer in the ENEPIG suppressed the growth of the interfacial IMC layer and the consumption of the Ni(P) layer, resulting in the superior interfacial stability of the solder joint. The shear test results show that the ENIG joint fractured along the interface, exhibiting indications of brittle failure possibly due to the brittle IMC layer. In contrast, the failure of the ENEPIG joint only went through the bulk solder, supporting the idea that the interface is mechanically reliable. The results from this study confirm that the Sn-Ag-Cu/ENEPIG solder joint is mechanically robust and, thus, the combination is a viable option for a Pb-free package system.

  17. Interplay between electronic and structural properties in the Pb/Ag(1 0 0) interface.

    PubMed

    Crepaldi, A; Zhan, R R; Moser, S; Sheverdyaeva, P M; Carbone, C; Papagno, M; Moras, P; Baraldi, A; Grioni, M

    2015-11-18

    We report an investigation of the structural and electronic properties of a Pb monolayer (ML) grown on Ag(1 0 0), by combining x-ray photoelectron diffraction (XPD) and angle resolved photoelectron spectroscopy (ARPES). The Pb atoms are found to arrange in a pseudo-hexagonal adlayer commensurate to the underlying square Ag substrate, resulting in a coincidence cell with c([Formula: see text]) periodicity. The electronic structure of the Pb ML in proximity of the Fermi level consists in three p-derived bands, which show different degrees of hybridization with the substrate for their different orbital characters. In particular, we report that the p xy states disperse without forming energy gap, in contrast to previous ARPES studies of the Pb ML on different metallic substrates. We attribute the absence of energy gap to the commensurability between substrate and adlayer, resulting in a higher two-dimensionality of the Pb ML. PMID:26490303

  18. Synthesis, characterization and thermochemistry of synthetic Pb-As, Pb-Cu and Pb-Zn jarosites

    NASA Astrophysics Data System (ADS)

    Forray, Ferenc Lázár; Smith, A. M. L.; Navrotsky, A.; Wright, K.; Hudson-Edwards, K. A.; Dubbin, W. E.

    2014-02-01

    The enthalpy of formation from the elements of well characterized Pb-As, Pb-Cu, and Pb-Zn synthetic jarosites, corresponding to chemical formulas (H3O)0.68±0.03Pb0.32±0.002Fe2.86±0.14(SO4)1.69±0.08(AsO4)0.31±0.02(OH)5.59±0.28(H2O)0.41±0.02, (H3O)0.67±0.03Pb0.33±0.02Fe2.71±0.14Cu0.25±0.01(SO4)2±0.00(OH)5.96±0.30(H2O)0.04±0.002 and (H3O)0.57±0.03Pb0.43±0.02Fe2.70±0.14Zn0.21±0.01(SO4)2±0.00(OH)5.95±0.30(H2O)0.05±0.002, was measured by high temperature oxide melt solution calorimetry and gave ΔH°f = -3691.2 ± 8.6 kJ/mol, ΔH°f = -3653.6 ± 8.2 kJ/mol, and ΔH°f = -3669.4 ± 8.4 kJ/mol, respectively. Using estimated entropies, the standard Gibbs free energy of formation from elements at 298 K ΔG°f of the three compounds were calculated to be -3164.8 ± 9.1, -3131.4 ± 8.7, and -3153.6 ± 8.9 kJ/mol, respectively. Based on these free energies, their log Ksp values are -13.94 ± 1.89, -4.38 ± 1.81 and -3.75 ± 1.80, respectively. For this compounds, a log10{Pb2+}-pH diagram is presented. The diagram shows that the formation of Pb-As jarosite may decrease aqueous arsenic and lead concentrations to meet drinking water standards. The new thermodynamic data confirm that transformation of Pb-As jarosite to plumbojarosite is thermodynamically possible.

  19. Corrosion of Ti-STS dissimilar joints brazed by a Ag interlayer and Ag-Cu-(Pd) alloy fillers

    NASA Astrophysics Data System (ADS)

    Lee, M. K.; Park, J. J.; Lee, G. J.; Lee, J. G.; Kim, D. W.; Lim, C. H.; Rhee, C. K.; Lee, Y. B.; Lee, J. K.; Hong, S. J.

    2011-02-01

    Corrosion behavior of dissimilar brazed joints between titanium Gr. 2 (Ti) and S31254 stainless steel (STS) was investigated. For the study, a Ag interlayer and two Ag-base eutectic alloys, 72Ag-28Cu and 66.2Ag-25.8Cu-8Pd (wt.%), were introduced as a diffusion control layer and fillers, respectively, between the base materials. The joints commonly had a layered structure of Ti(base)/TiAg/Ag solid solution/STS(base), but the one brazed by the Ag-Cu-Pd filler was slightly alloyed with the noble Pd elements over the Ag-rich solid solution region. A series of corrosion test experiments in a sea water revealed that a corrosion of TiAg layer and a stress-induced cracking at the TiAg/Ag solid solution interface were dominant due to a galvanic attack, but notably the Ti-STS dissimilar joint's resistance to corrosion was significantly improved by alloying the Pd in the joint. The corrosion behavior of such dissimilar metal joints was discussed based on galvanic corrosion effect.

  20. Synthesis of BiPbSrCaCuO superconductor

    DOEpatents

    Hults, William L.; Kubat-Martin, Kimberly A.; Salazar, Kenneth V.; Phillips, David S.; Peterson, Dean E.

    1994-01-01

    A process and a precursor composition for preparing a lead-doped bismuth-strontium-calcium-copper oxide superconductor of the formula Bi.sub.a Pb.sub.b Sr.sub.c Ca.sub.d Cu.sub.e O.sub.f wherein a is from about 1.7 to about 1.9, b is from about 0.3 to about 0.45, c is from about 1.6 to about 2.2, d is from about 1.6 to about 2.2, e is from about 2.97 to about 3.2 and f is 10.+-.z by reacting a mixture of Bi.sub.4 Sr.sub.3 Ca.sub.3 Cu.sub.4 O.sub.16.+-.z, an alkaline earth metal cuprate, e.g., Sr.sub.9 Ca.sub.5 Cu.sub.24 O.sub.41, and an alkaline earth metal plumbate, e.g., Ca.sub.2-x Sr.sub.x PbO.sub.4 wherein x is about 0.5, is disclosed.

  1. Synthesis of BiPbSrCaCuO superconductor

    DOEpatents

    Hults, W.L.; Kubat-Martin, K.A.; Salazar, K.V.; Phillips, D.S.; Peterson, D.E.

    1994-04-05

    A process and a precursor composition for preparing a lead-doped bismuth-strontium-calcium-copper oxide superconductor of the formula Bi[sub a]Pb[sub b]Sr[sub c]Ca[sub d]Cu[sub e]O[sub f] wherein a is from about 1.7 to about 1.9, b is from about 0.3 to about 0.45, c is from about 1.6 to about 2.2, d is from about 1.6 to about 2.2, e is from about 2.97 to about 3.2 and f is 10[+-]z by reacting a mixture of Bi[sub 4]Sr[sub 3]Ca[sub 3]Cu[sub 4]O[sub 16[+-]z], an alkaline earth metal cuprate, e.g., Sr[sub 9]Ca[sub 5]Cu[sub 24]O[sub 41], and an alkaline earth metal plumbate, e.g., Ca[sub 2[minus]x]Sr[sub x]PbO[sub 4] wherein x is about 0.5, is disclosed.

  2. Interplay between structural symmetry and magnetism in Ag-Cu

    NASA Astrophysics Data System (ADS)

    Yen, Tsung-Wen; Lai, S. K.

    2016-01-01

    We present first-principles theoretical calculations of the magnetic properties of bimetallic clusters Ag-Cu. The calculations proceeded by combining a previously developed state-of-the-art optimization algorithm (P.J. Hsu, S.K. Lai, J. Chem. Phys. 124 (2006) 0447110) with an empirical potential and applied this numerical scheme to determine first the lowest energy structures of pure clusters Ag38 and Cu38, and also their different atomic compositions AgnCu38-n for n=1,2,…,37. Then, we carried out the Kohn-Sham spin unrestricted density functional theory calculations on the optimized atomic structures obtained in the preceding step. Given the minimized structures from the first step as input configurations, the results of these re-optimized structures by full density functional theory calculations yield more refined electronic and atomic structures. A thorough comparison of the structural differences between these two sets of atomic geometries, one from using an empirical potential in which the electronic degrees of freedom were included approximately and another from subsequent minimization using the spin unrestricted density functional theory, sheds light on how the electronic charges disperse near atoms in clusters AgnCu38-n, and hence the distributions of electronic spin and charge densities at re-optimized sites of the cluster. These data of the electronic dispersion and the ionic configuration give clue to the mystery of the unexpected net magnetic moments which were found in some of the clusters AgnCu38-n at n=1-4, 24 as well as the two pure clusters. Possible origins for this unanticipated magnetism were explained in the context of the point group theory in much the same idea as the Clemenger-Nilsson model applied to simple metal clusters except that we draw particular attention to the atomic topologies and stress the bearing that they have on valence electrons in inducing them to disperse and occupy different molecular orbital energy levels.

  3. Characterization and device performance of (AgCu)(InGa)Se2 absorber layers

    SciTech Connect

    Hanket, Gregory; Boyle, Jonathan H.; Shafarman, William N.

    2009-06-08

    The study of (AgCu)(InGa)Se2 absorber layers is of interest in that Ag-chalcopyrites exhibit both wider bandgaps and lower melting points than their Cu counterparts. (AgCu)(InGa)Se2 absorber layers were deposited over the composition range 0 < Ag/(Ag+Cu) < 1 and 0.3 < Ga/(In+Ga) < 1.0 using a variety of elemental co-evaporation processes. Films were found to be singlephase over the entire composition range, in contrast to prior studies. Devices with Ga content 0.3 < Ga/(In+Ga) <0.5 tolerated Ag incorporation up to Ag/(Ag+Cu) = 0.5 without appreciable performance loss. Ag-containing films with Ga/(In+Ga) = 0.8 showed improved device characteristics over Cu-only control samples, in particular a 30-40% increase in short-circuit current. An absorber layer with composition Ag/(Ag+Cu) = 0.75 and Ga/(In+Ga) = 0.8 yielded a device with VOC = 890 mV, JSC = 20.5mA/cm2, fill factor = 71.3%, and η = 13.0%.

  4. Genesis of the Au-Bi-Cu-As, Cu-Mo ± W, and base-metal Au-Ag mineralization at the Mountain Freegold (Yukon, Canada): constraints from Ar-Ar and Re-Os geochronology and Pb and stable isotope compositions

    NASA Astrophysics Data System (ADS)

    Bineli Betsi, Thierry; Lentz, David; Chiaradia, Massimo; Kyser, Kurt; Creaser, Robert A.

    2013-12-01

    The genesis of mineralized systems across the Mountain Freegold area, in the Dawson Range Cu-Au ± Mo Belt of the Tintina Au province was constrained using Pb and stable isotope compositions and Ar-Ar and Re-Os geochronology. Pb isotope compositions of sulfides span a wide compositional range (206Pb/204Pb, 18.669-19.861; 208Pb/204Pb, 38.400-39.238) that overlaps the compositions of the spatially associated igneous rocks, thus indicating a magmatic origin for Pb and probably the other metals. Sulfur isotopic compositions of sulfide minerals are broadly similar and their δ34S (Vienna-Canyon Diablo Troilite (V-CDT)) values range from -1.4 to 3.6 ‰ consistent with the magmatic range, with the exception of stibnite from a Au-Sb-quartz vein, which has δ34S values between -8.1 and -3.1 ‰. The δ34S values of sulfates coexisting with sulfide are between 11.2 and 14.2 ‰; whereas, those from the weathering zone range from 3.7 to 4.3 ‰, indicating supergene sulfates derived from oxidation of hypogene sulfides. The δ13C (Vienna Peedee Belemnite (VPDB)) values of carbonate range from -4.9 to 1.1 ‰ and are higher than magmatic values. The δ18O (V-SMOW) values of magmatic quartz phenocrysts and magmatic least-altered rocks vary between 6.2 and 10.1 ‰ and between 5.0 and 10.1 ‰, respectively, whereas altered magmatic rocks and hydrothermal minerals (quartz and magnetite) are relatively 18O-depleted (4.2 to 7.9 ‰ and -6.3 to 1.5 ‰, respectively). Hydrogen isotope compositions of both least-altered and altered igneous rock samples are D-depleted (from -133 to -161 ‰ Vienna-Standard Mean Ocean Water (V-SMOW)), consistent with differential magma degassing and/or post-crystallization exchange between the rocks and meteoric ground water. Zircon from a chlorite-altered dike has a U-Pb crystallization age of 108.7 ± 0.4 Ma; whereas, the same sample yielded a whole-rock Ar-Ar plateau age of 76.25 ± 0.53 Ma. Likewise, molybdenite Re-Os model ages range from 75.8 to

  5. Stripping Voltammetry of Pb and Cu using a Microcantilever Electrode

    SciTech Connect

    Bange, Adam; Brown, Gilbert M; Senesac, Larry R; Thundat, Thomas George

    2009-01-01

    Microfabricated silicon microcantilevers coated with gold on one side have been used as working electrode in a three-electrode electrochemical arrangement. In addition to electrochemical current, cantilever bending has been used as a signal for monitoring electrode reactions on the cantilever surface. The microcantilever bending was measured by an optical beam deflection method as the surface potential was scanned and electrochemical reactions occurred on the surface. The microcantilever bending due to differential surface stress was used to sense Pb and Cu using cyclic voltammetry (CV) and linear sweep stripping voltammetry (LSSV).

  6. Mesozoic magmatism and timing of epigenetic Pb-Zn-Ag mineralization in the western Fortymile mining district, east-central Alaska: Zircon U-Pb geochronology, whole-rock geochemistry, and Pb isotopes

    USGS Publications Warehouse

    Dusel-Bacon, Cynthia; Aleinkoff, J.N.; Day, W.C.; Mortensen, J.K.

    2015-01-01

    Epigenetic Pb-Zn-Ag ± Cu prospects in the western Fortymile district are spatially associated with splays of the northeast-trending Kechumstuk sinistral-normal fault zone and with ca. 68-66 Ma felsic intrusions and dikes. The similarity between Pb isotope compositions of feldspars from the Late Cretaceous igneous bodies and sulfides from the epithermal prospects suggests a Late Cretaceous age for most of the mineralization. Fluid flow along the faults undoubtedly played a major role in mineralization. We interpret displacement on the northeast-trending faults to be a far-field effect of dextral translation along Late Cretaceous plate-scale boundaries and faults that were roughly parallel to the subsequently developed Denali and Tintina fault systems, which currently bound the region.

  7. Thermoelectric properties of CuS/Ag2S nanocomposites synthesed by modified polyol method

    NASA Astrophysics Data System (ADS)

    Tarachand, Sharma, Vikash; Ganesan, V.; Okram, Gunadhor S.

    2016-05-01

    This is the report on successful synthesis of Ag doped CuS nanostructures by modified polyol method. The resulting samples were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray (EDX), atomic force microscopy (AFM) and dynamic light scattering (DLS). Particle size of pure CuS nanoparticles (NPs) was 17 nm, 38 nm and 97 nm as determined from Scherrer formula, AFM and DLS, respectively. Introduction of Ag led to formation of CuS/Ag2S composites. A transition at 55 K in thermopower is ascribed to structural transformation from hexagonal to orthorhombic structure. Further, their thermoelectric properties exhibit remarkable change owing to Ag doping in CuS nanostructures. The power factor improves with increasing Ag content. They reveal that CuS/Ag2S nanocomposites are some of the potential candidates for generation of thermoelectricity in future.

  8. Sn-Ag-Cu and Sn-Cu solders: Interfacial reactions with platinum

    NASA Astrophysics Data System (ADS)

    Kim, Tae Hyun; Kim, Young-Ho

    2004-06-01

    The interfacial reaction and intermetallic formation at the interface between tin solders containing a small amount of copper with platinum were investigated in this study. Sn-0.7Cu and Sn-1.7Cu solders were reacted with platinum by dipping Pt/Ti/Si specimens into the molten solder at 260°C. Sn-3.8Ag-0.7Cu solder was reacted with platinum by reflowing solder paste on a Pt/Ti/Si substrate at 250°C. PtSn4 intermetallic formed in all specimens while Cu6Sn5 interfacial intermetallic was not observed at the solder/platinum interfaces in any specimens. A parabolic relationship existed between the thickness of the Pt-Sn intermetallic and reaction time, which indicates the intermetallic formation in the solder/platinum interface is diffusion controlled.

  9. Atomistic Structure and Nucleation of Nanoprecipitates in Thermoelectric PbTe- AgSbTe Composite

    SciTech Connect

    Ke, Xuezhi; Chen, Changfeng; Yang, Jihui; Wu, Lijun; Zhou, Juan; Li, Qiang; Zhu, Yimei; Kent, Paul R

    2009-01-01

    Many recent advances in thermoelectric (TE) materials are attributed to their nanoscale constituents. Determination of the nanocomposite structures has represented a major experimental and computational challenge and eluded previous attempts. Here we present the first atomically resolved structures of high performance TE material PbTe-AgSbTe2 by transmission electron microscopy imaging and density functional theory calculations. The results establish an accurate structural characterization for PbTe-AgSbTe2 and identify the interplay of electric dipolar interactions and strain fields as the driving mechanism for nanoprecipitate nucleation and aggregation.

  10. Petrographic, fluid inclusion and isotopic study of the Dikulushi Cu-Ag deposit, Katanga (D.R.C.): implications for exploration

    NASA Astrophysics Data System (ADS)

    Haest, Maarten; Muchez, Philippe; Dewaele, Stijn; Boyce, Adrian J.; von Quadt, Albrecht; Schneider, Jens

    2009-07-01

    The Dikulushi Cu-Ag vein-type deposit is located on the Kundelungu Plateau, in the southeastern part of the Democratic Republic of Congo (D.R.C.). The Kundelungu Plateau is situated to the north of the Lufilian Arc that hosts the world-class stratiform Cu-Co deposits of the Central African Copperbelt. A combined petrographic, fluid inclusion and stable isotope study revealed that the mineralisation at Dikulushi developed during two spatially and temporally distinct mineralising episodes. An early Cu-Pb-Zn-Fe mineralisation took place during the Lufilian Orogeny in a zone of crosscutting EW- and NE-oriented faults and consists of a sequence of sulphides that precipitated from moderate-temperature, saline H2O-NaCl-CaCl2-rich fluids. These fluids interacted extensively with the country rocks. Sulphur was probably derived from thermochemical reduction of Neoproterozoic seawater sulphate. Undeformed, post-orogenic Cu-Ag mineralisation remobilised the upper part of the Cu-Pb-Zn-Fe mineralisation in an oxidising environment along reactivated and newly formed NE-oriented faults in the eastern part of the deposit. This mineralisation is dominated by massive Ag-rich chalcocite that precipitated from low-temperature H2O-NaCl-KCl fluids, generated by mixing of moderate- and low-saline fluids. The same evolution in mineralisation assemblages and types of mineralising fluids is observed in three other Cu deposits on the Kundelungu Plateau. Therefore, the recognition of two distinct types of (vein-type) mineralisation in the study area has a profound impact on the exploration in the Kundelungu Plateau region. The identification of a Cu-Ag type mineralisation at the surface could imply the presence of a Cu-Pb-Zn-Fe mineralisation at depth.

  11. Study on synthesis of ultrafine Cu-Ag core-shell powders with high electrical conductivity

    NASA Astrophysics Data System (ADS)

    Peng, Yu-hsien; Yang, Chih-hao; Chen, Kuan-ting; Popuri, Srinivasa R.; Lee, Ching-Hwa; Tang, Bo-Shin

    2012-12-01

    Cu-Ag composite powders with high electrical conductivity were synthesized by electroless plating of silver sulfate, copper powders with eco-friendly sodium citrate as reducing agent, dispersant and chelating agent in an aqueous system. The influences of sodium citrate/Ag ratio on Ag coatings of Cu powders were investigated. Ag was formed a dense coating on the surface of Cu powders at a molar ratio of sodium citrate/Ag = 0.07/1. SEM showed an uniformity of Ag coatings on Cu powders. SEM-EDX also revealed that Cu cores were covered by Ag shells on the whole. The surface composition analysis by XPS indicated that without Cu or Ag atoms in the surface were oxidized. The resistivity measurements of Cu-Ag paste shows that they have closer resistivity as the pure silver paste's after 250 °C for 30 min heat-treatment (2.55 × 10-4 Ω cm) and 350 °C for 30 min heat-treatment (1.425 × 10-4 Ω cm).

  12. Morphology and electrochemical behavior of Ag-Cu nanoparticle-doped amalgams.

    PubMed

    Chung, Kwok-Hung; Hsiao, Li-Yin; Lin, Yu-Sheng; Duh, Jenq-Gong

    2008-05-01

    The aim of this study was to introduce Ag-Cu phase nanopowder as an additive to improve the corrosion behavior of dental amalgams. A novel Ag-Cu nanopowder was synthesized by the precipitation method. An amalgam alloy powder (World-Cap) was added and mixed with 5 wt.% and 10 wt.% of Ag-Cu nanopowders, respectively, to form experimental amalgam alloy powders. The original alloy powder was used as a control. Alloy powders were examined using X-ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy and electron probe microanalysis. Amalgam disk specimens of metallurgically prepared were tested in 0.9% NaCl solution using electrochemical methods. The changes in the corrosion potential and anodic polarization characteristics were determined. Corrosion potential data were analyzed statistically (n=3, analysis of variance, Tukey's test, p<0.05). The diameters of lamellar structure Ag-Cu nanoparticles were measured to be approximately 30 nm. The composition of the Ag-Cu nanoparticles determined by TEM-energy-dispersive spectroscopy was 56.28 at.% Ag-43.72 at.% Cu. A light-shaded phase was found mixing with dark Cu-Sn reaction particles in the reaction zones of Ag-Cu nanoparticle-doped amalgams. The Ag-Cu nanoparticle-doped amalgams exhibited zero current potentials more positive than the control (p<0.05) and no current peak was observed at -325mV that related to Ag-Hg phase and Cu6Sn5 phase in anodic polarization curves. The results indicated that the corrosion resistance of high-copper single-composition amalgam could be improved by Ag-Cu nanoparticle-doping. PMID:18321799

  13. Dependence of alloying and island composition on terrace width: Growth of Cu on Ag(100)

    NASA Astrophysics Data System (ADS)

    Beichert, Agnes; Zaum, Christopher; Morgenstern, Karina

    2015-07-01

    The growth of Cu on Ag(100) is investigated by low-temperature scanning tunneling microscopy. Exchange diffusion of Cu deposited onto Ag(100) leads to small pure Cu islands and larger islands consisting of a CuAg alloy in room temperature growth. The ratio of the different types of islands depends on terrace widths up to 100 nm. This surprisingly long-range dependence is correlated to the density of the surface alloy. We thus reveal that the exchange diffusion barrier is influenced by terrace widths far beyond quantum size confinement.

  14. Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

    SciTech Connect

    Zhao Jun; Zhang Dongming; Zhao Jie

    2011-09-15

    Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu-Ag) core-shell powders. - Graphical abstract: Mechanism of fabricating Cu-Ag particles with good dispersibility using {beta}-CDs as a protective agent was studied because of its special structure. Highlights: > Green supramolecular {beta}-CD used as a protective agent and ascorbic acid(Vc) as a reducing agent to fabricate Cu-Ag powders. > Particles are monodisperse and the diameter is close to nanoscale(100-150 nm). > Resistance of Cu particles to oxidation was higher. > Formation mechanism explained.

  15. An embedded atom method interatomic potential for the Cu-Pb system

    NASA Astrophysics Data System (ADS)

    Hoyt, J. J.; Garvin, J. W.; Webb, E. B., III; Asta, Mark

    2003-05-01

    A simple procedure is used to formulate a Cu-Pb pair interaction function within the embedded atom (EAM) method framework. Embedding, density and pair functions for pure Cu and pure Pb are taken from previously published EAM studies. Optimization of the Cu-Pb potential was achieved by comparing with experiment the computed heats of mixing for Cu-Pb liquid alloys and the equilibrium phase diagram, the latter being determined via a thermodynamic integration technique. The topology of the temperature-composition phase diagram computed with this EAM potential is consistent with experiment and features a liquid-liquid miscibility gap, low solubility of Pb in solid Cu and a monotectic reaction at approximately 1012 K.

  16. Thermoelectric properties of p-type PbTe/Ag{sub 2}Te bulk composites by extrinsic phase mixing

    SciTech Connect

    Lee, Min Ho; Rhyee, Jong-Soo

    2015-12-15

    We investigated the thermoelectric properties of PbTe/Ag{sub 2}Te bulk composites, synthesized by hand milling, mixing, and hot press sintering. From x-ray diffraction and energy dispersive x-ray spectroscopy measurements, we observed Ag{sub 2}Te phase separation in the PbTe matrix without Ag atom diffusion. In comparison with previously reported pseudo-binary (PbTe){sub 1−x}(Ag{sub 2}Te){sub x} composites, synthesized by high temperature phase separation, the PbTe/Ag{sub 2}Te bulk composites fabricated with a low temperature phase mixing process give rise to p-type conduction of carriers with significantly decreased electrical conductivity. This indicates that Ag atom diffusion in the PbTe matrix changes the sign of the Seebeck coefficient to n-type and also increases the carrier concentration. Effective p-type doping with low temperature phase separation by mixing and hot press sintering can enhance the thermoelectric performance of PbTe/Ag{sub 2}Te bulk composites, which can be used as a p-type counterpart of n-type (PbTe){sub 1−x}(Ag{sub 2}Te){sub x} bulk composites.

  17. Oxygen reduction reaction on Cu-doped Ag cluster for fuel-cell cathode.

    PubMed

    Ma, Wenqiang; Chen, Fuyi; Zhang, Nan; Wu, Xiaoqiang

    2014-10-01

    The development of fuel cells as clean-energy technologies is largely limited by the prohibitive cost of the noble-metal catalysts needed for catalyzing the oxygen reduction reaction (ORR) in fuel cells. A fundamental understanding of catalyst design principle that links material structures to the catalytic activity can accelerate the search for highly active and abundant bimetallic catalysts to replace platinum. Here, we present a first-principles study of ORR on Ag12Cu cluster in alkaline environment. The adsorptions of O2, OOH, and OH on Cu-doped Ag13 are stronger than on Ag13. The d-band centers of adsorption sites show the Cu-doping makes d-electrons transferred to higher energy state, and improves O2 dissociation. ORR processes on Ag12Cu and Ag13 indicate Cu-doping can strongly promote ORR, and ORR process can be better preformed on Ag12Cu than on Ag13. For four-electron transfer, the effective reversible potential is 0.401 V/RHE on Ag12Cu in alkaline medium. PMID:25227449

  18. Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate

    NASA Astrophysics Data System (ADS)

    Huang, M. L.; Yang, F.

    2014-11-01

    The downsizing of solder balls results in larger interfacial intermetallic compound (IMC) grains and less Cu substrate consumption in lead-free soldering on Cu substrates. This size effect on the interfacial reaction is experimentally demonstrated and theoretically analyzed using Sn-3.0Ag-0.5Cu and Sn-3.5Ag solder balls. The interfacial reaction between the Sn-xAg-yCu solders and Cu substrates is a dynamic response to a combination of effects of interfacial IMC growth, Cu substrate consumption and composition variation in the interface zone. A concentration gradient controlled (CGC) kinetics model is proposed to explain the combined effects. The concentration gradient of Cu at the interface, which is a function of solder volume, initial Cu concentration and reaction time, is the root cause of the size effect. We found that a larger Cu concentration gradient results in smaller Cu6Sn5 grains and more consumption of Cu substrate. According to our model, the growth kinetics of interfacial Cu6Sn5 obeys a t1/3 law when the molten solder has approached the solution saturation, and will be slower otherwise due to the interfering dissolution mechanism. The size effect introduced in this model is supported by a good agreement between theoretical and experimental results. Finally, the scope of application of this model is discussed.

  19. Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate

    PubMed Central

    Huang, M. L.; Yang, F.

    2014-01-01

    The downsizing of solder balls results in larger interfacial intermetallic compound (IMC) grains and less Cu substrate consumption in lead-free soldering on Cu substrates. This size effect on the interfacial reaction is experimentally demonstrated and theoretically analyzed using Sn-3.0Ag-0.5Cu and Sn-3.5Ag solder balls. The interfacial reaction between the Sn-xAg-yCu solders and Cu substrates is a dynamic response to a combination of effects of interfacial IMC growth, Cu substrate consumption and composition variation in the interface zone. A concentration gradient controlled (CGC) kinetics model is proposed to explain the combined effects. The concentration gradient of Cu at the interface, which is a function of solder volume, initial Cu concentration and reaction time, is the root cause of the size effect. We found that a larger Cu concentration gradient results in smaller Cu6Sn5 grains and more consumption of Cu substrate. According to our model, the growth kinetics of interfacial Cu6Sn5 obeys a t1/3 law when the molten solder has approached the solution saturation, and will be slower otherwise due to the interfering dissolution mechanism. The size effect introduced in this model is supported by a good agreement between theoretical and experimental results. Finally, the scope of application of this model is discussed. PMID:25408359

  20. Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate.

    PubMed

    Huang, M L; Yang, F

    2014-01-01

    The downsizing of solder balls results in larger interfacial intermetallic compound (IMC) grains and less Cu substrate consumption in lead-free soldering on Cu substrates. This size effect on the interfacial reaction is experimentally demonstrated and theoretically analyzed using Sn-3.0Ag-0.5Cu and Sn-3.5Ag solder balls. The interfacial reaction between the Sn-xAg-yCu solders and Cu substrates is a dynamic response to a combination of effects of interfacial IMC growth, Cu substrate consumption and composition variation in the interface zone. A concentration gradient controlled (CGC) kinetics model is proposed to explain the combined effects. The concentration gradient of Cu at the interface, which is a function of solder volume, initial Cu concentration and reaction time, is the root cause of the size effect. We found that a larger Cu concentration gradient results in smaller Cu(6)Sn(5) grains and more consumption of Cu substrate. According to our model, the growth kinetics of interfacial Cu(6)Sn(5) obeys a t(1/3) law when the molten solder has approached the solution saturation, and will be slower otherwise due to the interfering dissolution mechanism. The size effect introduced in this model is supported by a good agreement between theoretical and experimental results. Finally, the scope of application of this model is discussed. PMID:25408359

  1. Cellular Energy Allocation to Assess the Impact of Nanomaterials on Soil Invertebrates (Enchytraeids): The Effect of Cu and Ag.

    PubMed

    Gomes, Susana I L; Scott-Fordsmand, Janeck J; Amorim, Mónica J B

    2015-06-01

    The effects of several copper (Cu) and silver (Ag) nanomaterials were assessed using the cellular energy allocation (CEA), a methodology used to evaluate the energetic status and which relates with organisms' overall condition and response to toxic stress. Enchytraeus crypticus (Oligochatea), was exposed to the reproduction effect concentrations EC20/50 of several Cu and Ag materials (CuNO3, Cu-Field, Cu-Nwires and Cu-NPs; AgNO3, Ag NM300K, Ag-NPs Non-coated and Ag-NPs PVP-coated) for 7 days (0-3-7d). The parameters measured were the total energy reserves available (protein, carbohydrate and lipid budgets) and the energy consumption (Ec) integrated to obtain the CEA. Results showed that these parameters allowed a clear discrimination between Cu and Ag, but less clearly within each of the various materials. For Cu there was an increase in Ec and protein budget, while for Ag a decrease was observed. The results corroborate known mechanisms, e.g., with Cu causing an increase in metabolic rate whereas Ag induces mitochondrial damage. The various Cu forms seem to activate different mechanisms with size and shape (e.g., Cu-NPs versus Cu-Nwires), causing clearly different effects. For Ag, results are in line with a slower oxidation rate of Ag-NMs in comparison with Ag-salt and hence delayed effects. PMID:26086707

  2. Cellular Energy Allocation to Assess the Impact of Nanomaterials on Soil Invertebrates (Enchytraeids): The Effect of Cu and Ag

    PubMed Central

    Gomes, Susana I. L.; Scott-Fordsmand, Janeck J.; Amorim, Mónica J. B.

    2015-01-01

    The effects of several copper (Cu) and silver (Ag) nanomaterials were assessed using the cellular energy allocation (CEA), a methodology used to evaluate the energetic status and which relates with organisms’ overall condition and response to toxic stress. Enchytraeus crypticus (Oligochatea), was exposed to the reproduction effect concentrations EC20/50 of several Cu and Ag materials (CuNO3, Cu-Field, Cu-Nwires and Cu-NPs; AgNO3, Ag NM300K, Ag-NPs Non-coated and Ag-NPs PVP-coated) for 7 days (0-3-7d). The parameters measured were the total energy reserves available (protein, carbohydrate and lipid budgets) and the energy consumption (Ec) integrated to obtain the CEA. Results showed that these parameters allowed a clear discrimination between Cu and Ag, but less clearly within each of the various materials. For Cu there was an increase in Ec and protein budget, while for Ag a decrease was observed. The results corroborate known mechanisms, e.g., with Cu causing an increase in metabolic rate whereas Ag induces mitochondrial damage. The various Cu forms seem to activate different mechanisms with size and shape (e.g., Cu-NPs versus Cu-Nwires), causing clearly different effects. For Ag, results are in line with a slower oxidation rate of Ag-NMs in comparison with Ag-salt and hence delayed effects. PMID:26086707

  3. Unusual coordination modes of ligand 2-chloro-5-nitrobenzene sulfonate: Synthesis, spectroscopic characterization, thermal and X-ray structural studies of metal 2-chloro-5-nitrobenzene sulfonate complexes, metal = Tl(I), Cu(II), Ag(I) and Pb(II)

    NASA Astrophysics Data System (ADS)

    Sharma, Raj Pal; Kumar, Santosh; Venugopalan, Paloth; Aree, Thammarat; Starynowicz, Przemysław

    2016-03-01

    Using metal ions thallium(I), copper(II), silver(I) and lead(II) and ligand 2-chloro-5-nitrobenzenesulfonate(cnb), four new metal complexes [Tl(cnb)]n(1), [Cu(en)2(H2O)2](cnb)2.2H2O(2), where en = ethylenediamine, [Ag(cnb)]n(3) and [Pb(cnb)2]n(4) have been synthesized and characterized by elemental analyses, spectroscopic methods (FT-IR, multinuclear NMR), single crystal X-ray structure analyses (except 4) and TGA analyses. Complexes 1 and 3 crystallize in monoclinic crystal system in P21/c space group having unit cell dimensions, a = 13.849(2) Å, b = 9.449(2) Å, c = 7.506(2)Å, β = 105.3°, V = 947.1 Å3, Z = 4 and a = 15.197(13)Å, b = 5.136(4)Å, c = 24.058(18)Å, β = 106.86°, V = 1797.1 Å3, Z = 4 respectively. Complex 2, crystallizes in triclinic crystal system with PI bar having unit cell parameters; a = 6.888 Å, b = 7.835 Å, c = 13.227 Å, α = 80.20°, β = 83.15°, γ = 78.18°, V = 945.6 Å3, Z = 1. X-ray structure determination revealed that complexes 1 and 3 are polymeric in nature, whereas complex 2 has ionic structure. Remarkably, cnb ligand is coordinating through sulfonato oxygen atoms and nitro oxygen atoms in thallium complex but coordinates through sulfonato oxygen atoms and chloro group in silver complex, thereby showing the flexible/versatile coordinating behaviour of anionic ligand. This is unusual.

  4. Effect of Solder-Joint Geometry on the Low-Cycle Fatigue Behavior of Sn-xAg-0.7Cu

    NASA Astrophysics Data System (ADS)

    Lee, Hwa-Teng; Huang, Kuo-Chen

    2016-07-01

    Low-cycle fatigue tests of Sn-Ag-Cu (SAC) Pb-free solder joints under fixed displacement were performed to evaluate the influence of Ag content (0-3 wt.%) and solder-joint geometry (barrel and hourglass types) on solder-joint fatigue behavior and reliability. The solder joints were composed of fine particles of Ag3Sn and Cu6Sn5, which aggregated as an eutectic constituent at grain boundaries of the primary β-Sn phase and formed a dense network structure. A decrease in the Ag content resulted in coarsening of the β-Sn and eutectic phases, which, in turn, decreased the strength of the joint and caused earlier failure. Solder joints in the hourglass form exhibited better fatigue performance with longer life than barrel-type joints. The sharp contact angle formed between the solder and the Cu substrate by the barrel-type joints concentrated stress, which compromised fatigue reliability. The addition of Ag to the solder, however, enhanced fatigue performance because of strengthening caused by Ag3Sn formation. The cracks of the barrel-type SAC solder joints originated mostly at the contact corner and propagated along the interfacial layer between the interfacial intermetallic compound (IMC) and solder matrix. Hourglass-type solder joints, however, demonstrated both crack initiation and propagation in the solder matrix (solder mode). The addition of 1.5-2.0 wt.% Ag to SAC solder appears to enhance the fatigue performance of solder joints while maintaining sufficient strength.

  5. Accumulation of Ag and Cu in Amanita strobiliformis and characterization of its Cu and Ag uptake transporter genes AsCTR2 and AsCTR3.

    PubMed

    Beneš, Vojtěch; Hložková, Kateřina; Matěnová, Michaela; Borovička, Jan; Kotrba, Pavel

    2016-04-01

    Macrofungi can accumulate in their sporocarps remarkably high concentrations of Cu and Ag. We have previously demonstrated that the non-essential Ag is in the ectomycorrhizal, Ag-hyperaccumulating Amanita strobiliformis sequestered by 3.4-kDa metallothioneins (MTs) produced as AsMT1a, 1b and 1c isoforms. Here, we describe two populations of wild-grown A. strobiliformis sporocarps, which showed certain correlation between the concentrations of accumulated Ag (284 ± 64 and 67 ± 15 mg kg(-1)) and Cu (76 ± 13 and 30 ± 12 mg kg(-1)), suggesting that an overlap may exist in the cell biology of Ag and Cu in this species. Metal speciation analysis revealed that the intracellular Cu in the sporocarps of both populations was, like Ag, associated with the 3.4-kDa MTs. A search of A. strobiliformis transcriptome for sequences encoding proteins of the Cu transporter (CTR) family identified four AsCTR cDNAs, which were, like AsMT1s, confirmed in both populations. The predicted AsCTR proteins showed homology to vacuolar (AsCTR1 and AsCTR4) and plasma membrane (AsCTR2 and AsCTR3) CTRs. Heterologous expression of AsCTR2, AsCTR3 and their translational fusions with green fluorescent protein (GFP) in Cu uptake-deficient S. cerevisiae indicated that both AsCTRs are functional Cu and Ag uptake transporters: recombinant genes complemented growth defects and increased Cu and Ag uptake rates in yeasts and the GFP-tagged protein localized to the cell periphery. Site directed mutagenesis revealed the importance of the conserved-among-CTRs M-X3-M motif for the AsCTR2- and AsCTR3-mediated transport of both Cu and Ag. These results provide the first evidence that fungal CTRs can recognize Ag for transport. PMID:26862109

  6. Microstructural aspects of Cu-Ag produced by the Taylor wire method

    SciTech Connect

    Han, K.; Embury, J.D.; Petrovic, J.J.; Weatherly, G.C.

    1998-08-10

    The microstructure and phase transformations of Cu-16 at.% Ag fabricated by the Taylor wire technique of drawing molten metals in a glass tube have been studied. As the diameter of the wire becomes smaller and the cooling rate increases, the scale of the microstructure is refined. Nano-crystals of supersaturated solid solution with a 10 nm grain size were observed when the wire diameter was less than 10{micro}m. When the diameter of the wire was larger than 20 {micro}m, proeutectic Cu and the Cu + Ag eutectic were found. In the region where the Cu-Ag eutectic was formed, a (111) twin orientation relationship was found between Cu and Ag.

  7. Stabilization of As-, Pb-, and Cu-contaminated soil using calcined oyster shells and steel slag.

    PubMed

    Moon, Deok Hyun; Wazne, Mahmoud; Cheong, Kyung Hoon; Chang, Yoon-Young; Baek, Kitae; Ok, Yong Sik; Park, Jeong-Hun

    2015-07-01

    In this study, As-, Pb-, and Cu-contaminated soil was stabilized using calcined oyster shells (COS) and steel slag (SS). The As-contaminated soil was obtained from a timber mill site where chromate copper arsenate (CCA) was used as a preservative. On the other hand, Pb- and Cu-contaminated soil was obtained from a firing range. These two soils were thoroughly mixed to represent As-, Pb-, and Cu-contaminated soil. Calcined oyster shells were obtained by treating waste oyster shells at a high temperature using the calcination process. The effectiveness of stabilization was evaluated by 1-N HCl extraction for As and 0.1-N HCl extraction for Pb and Cu. The treatment results showed that As, Pb, and Cu leachability were significantly reduced upon the combination treatment of COS and SS. The sole treatment of SS (10 wt%) did not show effective stabilization. However, the combination treatment of COS and SS showed a significant reduction in As, Pb, and Cu leachability. The best stabilization results were obtained from the combination treatment of 15 wt% COS and 10 wt% SS. The SEM-EDX results suggested that the effective stabilization of As was most probably achieved by the formation of Ca-As and Fe-As precipitates. In the case of Pb and Cu, stabilization was most probably associated with the formation of pozzolanic reaction products such as CSHs and CAHs. PMID:26013737

  8. Effects of the crystallographic orientation of Sn on the electromigration of Cu/Sn-Ag-Cu/Cu ball joints

    SciTech Connect

    Lee, Kiju; Kim, Keun-Soo; Tsukada, Yutaka; Suganuma, Katsuaki; Yamanaka, Kimihiro; Kuritani, Soichi; Ueshima, Minoru

    2011-11-17

    Electromigration behavior and fast circuit failure with respect to crystallographic orientation of Sn grains were examined. The test vehicle was Cu/Sn-3.0 wt% Ag-0.5 wt% Cu/Cu ball joints, and the applied current density was 15 kA/cm2 at 160 °C. The experimental results indicate that most of the solder bumps show different microstructural changes with respect to the crystallographic orientation of Sn grains. Fast failure of the bump occurred due to the dissolution of the Cu circuit on the cathode side caused by the fast interstitial diffusion of Cu atoms along the c-axis of the Sn grains when the c-axis was parallel to the electron flow. Slight microstructural changes were observed when the c-axis was perpendicular to the electron flow. In addition, Cu6Sn5 intermetallic compound (IMC) was formed along the direction of the c-axis of the Sn grains instead of the direction of electron flow in all solder ball joints.

  9. Efficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions

    PubMed Central

    2014-01-01

    In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed CuInS2 layer was prepared to replace the commonly used TiO2 layer in previously reported perovskite-based solar cells. The influence of the thickness of the as-prepared CuInS2 film on the performance of the ITO/CuInS2(n)/Al2O3/(CH3NH3)PbI3/Ag cells was investigated. The ITO/CuInS2(2)/Al2O3/(CH3NH3)PbI3/Ag cell showed the best performance and achieved power conversion efficiency up to 5.30%. PMID:25278818

  10. Efficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions.

    PubMed

    Chen, Chong; Li, Chunxi; Li, Fumin; Wu, Fan; Tan, Furui; Zhai, Yong; Zhang, Weifeng

    2014-01-01

    In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed CuInS2 layer was prepared to replace the commonly used TiO2 layer in previously reported perovskite-based solar cells. The influence of the thickness of the as-prepared CuInS2 film on the performance of the ITO/CuInS2(n)/Al2O3/(CH3NH3)PbI3/Ag cells was investigated. The ITO/CuInS2(2)/Al2O3/(CH3NH3)PbI3/Ag cell showed the best performance and achieved power conversion efficiency up to 5.30%. PMID:25278818

  11. Efficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions

    NASA Astrophysics Data System (ADS)

    Chen, Chong; Li, Chunxi; Li, Fumin; Wu, Fan; Tan, Furui; Zhai, Yong; Zhang, Weifeng

    2014-09-01

    In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed CuInS2 layer was prepared to replace the commonly used TiO2 layer in previously reported perovskite-based solar cells. The influence of the thickness of the as-prepared CuInS2 film on the performance of the ITO/CuInS2( n)/Al2O3/(CH3NH3)PbI3/Ag cells was investigated. The ITO/CuInS2(2)/Al2O3/(CH3NH3)PbI3/Ag cell showed the best performance and achieved power conversion efficiency up to 5.30%.

  12. A LEED study of c(2 × 2) Cu and Ag/Mo(100)

    NASA Astrophysics Data System (ADS)

    Cerdá, J. R.; Soria, F.; Palomares, F. J.; de Andres, P. L.

    1992-05-01

    We have performed a low-energy electron diffraction (LEED) analysis of the novel structures c(2 × 2) Cu/Mo(100), and c(2 × 2) Ag/Mo(100). Both adsorbates sit in the hollow site, at a higher of 1.22 ± 0.08 Å for Cu atoms and 1.78 ± 0.10 Å for the Ag. Also, the typical inwards relaxation of Mo(100)(1.48Å) is released to a value near the bulk (1.575Å) for Cu, while this effect is not seen for Ag.

  13. Preparation and optical properties of silica@Ag Cu alloy core-shell composite colloids

    NASA Astrophysics Data System (ADS)

    Zhang, Jianhui; Liu, Huaiyong; Wang, Zhenlin; Ming, Naiben

    2007-04-01

    The silica@Ag-Cu alloy core-shell composite colloids have been successfully synthesized by an electroless plating approach to explore the possibility of modifying the plasmon resonance at the nanoshell surface by varying the metal nanoshell composition for the first time. The surface plasmon resonance of the composite colloids increases in intensity and shifts towards longer, then shorter wavelengths as the Cu/Ag ratio in the alloy shell is increased. The variations in intensity of the surface plasmon resonance with the Cu/Ag ratio obviously affect the Raman bands of the silica colloid core. The report here may supply a new technique to effectively modify the surface plasmon resonance.

  14. Plasmon-enhanced photocatalytic properties of nano Ag@AgBr on single-crystalline octahedral Cu2O (1 1 1) microcrystals composite photocatalyst

    NASA Astrophysics Data System (ADS)

    Liu, Li; Lin, Shuanglong; Hu, Jinshan; Liang, Yinghua; Cui, Wenquan

    2015-03-01

    A new composite photocatalyst Ag@AgBr/Cu2O was prepared by loading Ag@AgBr on (1 1 1) facts of octahedral Cu2O substrate via a facile precipitation in situ photoreduction method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), ultraviolet-visible diffuse reflectance spectroscopy (UV-vis), nitrogen sorption and the photoelectrochemical measurements. The results show that Ag@AgBr nanoparticles are well-dispersed on Cu2O nanoparticles with narrow size distributions and controllable sizes from 10 to 30 nm. TEM results of the as-synthesized Ag@AgBr/Cu2O nanocomposite revealed that Ag@AgBr nanoparticles were attached to the surface of octahedral Cu2O. Photocatalytic degradation of methylene blue (MB) was carried out to evaluate the photocatalytic activity of Ag@AgBr/Cu2O under visible-light irradiation. The Ag@AgBr/Cu2O composite showed stronger visible light absorption capacity and higher photocatalytic activity than pure Cu2O. The Ag@AgBr (15 wt.%)/Cu2O sample presented the best photocatalytic activity, degrading 93.28% MB after irradiation for 90 min, due to their high surface area (18.499 m2 g-1), the Crystal effect of Cu2O and surface plasmon resonance of Ag NPs. Meanwhile, phenol was degraded to further prove the degradation ability of Ag@AgBr/Cu2O. In addition, the quenching effect was examined in the photocatalytic reaction process of MB. Active h+, Br0 and the resulting rad O2- played the major roles for the dye degradation, while rad OH was verified to be insignificant. Based on the experimental results, a photocatalytic mechanism for organics degradation over Ag@AgBr/Cu2O photocatalysts was proposed. The electronic interactions were systematically studied and confirmed by the photoelectrochemical measurements.

  15. Characterization of Cu3P phase in Sn3.0Ag0.5Cu0.5P/Cu solder joints

    NASA Astrophysics Data System (ADS)

    Chen, Jian-xun; Zhao, Xing-ke; Zou, Xu-chen; Huang, Ji-hua; Hu, Hai-chun; Luo, Hai-lian

    2014-01-01

    This article reports the effects of phosphorus addition on the melting behavior, microstructure, and mechanical properties of Sn3.0Ag0.5Cu solder. The melting behavior of the solder alloys was determined by differential scanning calorimetry. The interfacial microstructure and phase composition of solder/Cu joints were studied by scanning electron microscopy and energy dispersive spectrometry. Thermodynamics of Cu-P phase formation at the interface between Sn3.0Ag0.5Cu0.5P solder and the Cu substrate was characterized. The results indicate that P addition into Sn3.0Ag0.5Cu solder can change the microstructure and cause the appearance of rod-like Cu3P phase which is distributed randomly in the solder bulk. The Sn3.0Ag0.5Cu0.5P joint shows a mixture of ductile and brittle fracture after shear testing. Meanwhile, the solidus temperature of Sn3.0Ag0.5Cu solder is slightly enhanced with P addition.

  16. Differential Responsivity of the Organic-Inorganic Ag/n-GaAs/p-CuPc/Ag Photoelectric Sensor

    NASA Astrophysics Data System (ADS)

    Karimov, Kh. S.; Qazi, I.; Fedorov, M. I.; Moiz, S. A.; Khan, T. A.; Senin, H. B.

    2007-05-01

    A thin film of copper phthalocynanine (CuPc) as p-type semiconductor was deposited by vacuum evaporation on an n-type GaAs single-crystal semiconductor substrate. Then semitransparent Ag thin film having gradient of thickness was deposited on CuPc film by thermal evaporation in vacuum to fabricate Ag/n-GaAs/p-CuPc/Ag sensor. Due to gradient of thickness, 6% and 10% of the incident light can be transmitted through the silver film in the edge and in the center of the sample respectively. Open circuit voltage and short circuit current were measured by exposing only a small area of the sensor to light i.e. in differential mode of operation. It was observed that open-circuit voltage and short-circuit current depends on position of the exposed area of the sensor to light. In differential mode of operation the open-circuit voltage and short circuit current versus intensity of illumination showed less non linearity as compared to integral mode of operation. On the basis of experimental data, an equivalent circuit of the sensor was designed and its computer simulation was carried out. The simulated data matched reasonably with the experimental curves. It was found that in differential mode of operation the Ag/n-GaAs/p-CuPc/Ag sensor's output voltage and current depends on the position of light beam probe. Due to this the sensor may be used as a photoelectric displacement transducer.

  17. Temperature-dependent thermal expansion of cast and hot-pressed LAST (Pb-Sb-Ag-Te) thermoelectric materials

    SciTech Connect

    Ren, Fei; Hall, Bradley D.; Case, Eldon D; Timm, Edward J; Trejo, Rosa M; Meisner, Roberta Ann; Lara-Curzio, Edgar

    2009-01-01

    The thermal expansion for two compositions of cast and hot-pressed LAST (Pb Sb Ag Te) n-type thermoelectric materials has been measured between room temperature and 673K via thermomechanical analysis (TMA). In addition, using high-temperature X-ray diffraction (HT-XRD), the thermal expansion for both cast and hot-pressed LAST materials was determined from the temperature-dependent lattice parameters measured between room temperature and 623 K. The TMA and HT-XRD determined values of the coefficient of thermal expansion (CTE) for the LAST compositions ranged between 20106K1 and 24106K1, which is comparable to the CTE values for other thermoelectric materials including PbTe and Bi2Te3. The CTE of the LAST specimens with a higher Ag content (Ag0.86Pb19Sb1.0Te20) exhibited a higher CTE value than that of the LAST material with a lower Ag content (Ag0.43Pb18Sb1.2Te20). In addition, a peak in the temperature-dependent CTE was observed between room temperature and approximately 450K for both the cast and hot-pressed LAST with the Ag0.86Pb19Sb1.0Te20 composition, whereas the CTE of the Ag0.43Pb18Sb1.2Te20 specimen increased monotonically with temperature.

  18. Sulfur isotope and trace element systematics of zoned pyrite crystals from the El Indio Au-Cu-Ag deposit, Chile

    NASA Astrophysics Data System (ADS)

    Tanner, Dominique; Henley, Richard W.; Mavrogenes, John A.; Holden, Peter

    2016-04-01

    We present a comparative study between early, massive pyrite preceding (Cu-Ag) sulfosalt mineralization in high-temperature feeder zones (`early pyrite') and late pyrite that formed during silicic alteration associated with Au deposition (`late pyrite') at the El Indio high-sulfidation Au-Ag-Cu deposit, Chile. We use coupled in situ sulfur isotope and trace element analyses to chronologically assess geochemical variations across growth zones in these pyrite crystals. Early pyrite that formed in high-temperature feeder zones shows intricate oscillatory zonation of Cu, with individual laminae containing up to 1.15 wt% Cu and trace Co, As, Bi, Ni, Zn, Se, Ag, Sb, Te, Au, Pb and Bi. Late pyrite formed after (Cu-Ag) sulfosalt mineralization. It contains up to 1.14 wt% As with trace Cu, Zn, Pb, V, Mn, Co, Ni, Ge, Se, Ag, Sb, Te, Pb and Bi, as well as colloform Cu-rich growth bands containing vugs toward the outer edges of some crystals. Plotting the trace element data in chronological order (i.e., from core to rim) revealed that Co and Ni were the only elements to consistently co-vary across growth zones. Other trace elements were coupled in specific growth zones, but did not consistently co-vary across any individual crystal. The δ34S of early pyrite crystals in high-temperature feeder zones range from -3.19 to 1.88 ‰ (±0.5 ‰), consistent with sublimation directly from a high-temperature magmatic vapor phase. Late pyrite crystals are distinctly more enriched in δ34S than early pyrite (δ34S = 0.05-4.77 ‰, ±0.5 ‰), as a consequence of deposition from a liquid phase at lower temperatures. It is unclear whether the late pyrite was deposited from a small volume of liquid condensate, or a larger volume of hydrothermal fluid. Both types of pyrite exhibit intracrystalline δ34S variation, with a range of up to 3.31 ‰ recorded in an early pyrite crystal and up to 4.48 ‰ in a late pyrite crystal. Variations in δ34Spyrite at El Indio did not correspond with

  19. Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics

    NASA Astrophysics Data System (ADS)

    Lee, Changsoo; Kim, Na Rae; Koo, Jahyun; Jong Lee, Yung; Lee, Hyuck Mo

    2015-11-01

    In this work, we synthesized uniform Cu-Ag core-shell nanoparticles using a facile two-step process that consists of thermal decomposition and galvanic displacement methods. The core-shell structure of these nanoparticles was confirmed through characterization using transmission electron microscopy, energy-dispersive spectroscopy, and x-ray diffraction. Furthermore, we investigated the oxidation stability of the Cu-Ag core-shell nanoparticles in detail. Both qualitative and quantitative x-ray photoelectron spectroscopy analyses confirm that the Cu-Ag core-shell nanoparticles have considerably higher oxidation stability than Cu nanoparticles. Finally, we formulated a conductive ink using the synthesized nanoparticles and coated it onto glass substrates. Following the sintering process, we compared the resistivity of the Cu-Ag core-shell nanoparticles with that of the Cu nanoparticles. The results of this study clearly show that the Cu-Ag core-shell nanoparticles can potentially be used as an alternative to Ag nanoparticles because of their superior oxidation stability and electrical properties.

  20. Thermoelectric Properties of CuAgSe doped with Co, Cr

    NASA Astrophysics Data System (ADS)

    Czajka, Peter; Yao, Mengliang; Opeil, Cyril

    Thermoelectric materials represent one way that reliable cooling below the boiling point of nitrogen can be realized. Current materials do not exhibit sufficiently high efficiencies at cryogenic temperatures, but significant progress is being made. One material that has generated significant interest recently is CuAgSe. It has been demonstrated (Ishiwata et al., Nature Mater. 2013) that doping CuAgSe with 10% Ni at the Cu sites increases the material's thermoelectric figure of merit (ZT) at 100 K from 0.02 to 0.10. This is intriguing not just because of the dramatic effect that the Ni doping produces, but also because CuAgSe is a semimetal and semimetals are not usually able to exhibit the kind of asymmetric carrier activation necessary for strong thermoelectric performance. In order to further investigate the unusual nature of thermoelectricity in CuAgSe and its strong dependence on chemical composition, we have synthesized and measured the thermoelectric properties of a series of CuAgSe samples doped with Co and Cr. Temperature-dependent magnetic and thermoelectric transport properties of CuAgSe as a function of Co and Cr doping will be discussed. This work is supported by the Department of Defense, AFOSR, MURI Program Contract # FA9550-10-1-0533 and the Trustees of Boston College.

  1. Simple and Sensitive Colorimetric Assay for Pb2+ Based on Glutathione Protected Ag Nanoparticles by Salt Amplification.

    PubMed

    Chen, Zhang; Li, Huidong; Chu, Lin; Liu, Chenbin; Luo, Shenglian

    2015-02-01

    A simple and sensitive colorimetric assay for Pb2+ detection has been reported using glutathione protected silver nanoparticles (AgNPs) by salt amplification. The naked AgNPs aggregate under the influence of salt. Glutathione (GSH) can bind to AgNPs via Ag-S bond, helping AgNPs to against salt-induced aggregation. However, GSH binding to AgNPs can be compromised by the interaction between Pb2+ and GSH. As a result, Pb2+-mediated aggregation of AgNPs under the influence of salt is reflected by the UV-Visible spectrum, and the qualitative and quantitative detection for Pb2+ is accomplished, with the detection range 0.5-4 µM and a detection limit of 0.5 µM. At the same time, Pb2+ in real water sample is detected. Furthermore, the high selectivity and low cost of the assay means it is promising for enviromental applications. PMID:26353676

  2. Development of Sn-Ag-Cu-X Solders for Electronic Assembly by Micro-Alloying with Al

    SciTech Connect

    Boesenberg, Adam; Anderson, Iver; Harringa, Joel

    2012-03-10

    Of Pb-free solder choices, an array of solder alloys based on the Sn-Ag-Cu (SAC) ternary eutectic (T eut = 217°C) composition have emerged with potential for broad use, including ball grid array (BGA) joints that cool slowly. This work investigated minor substitutional additions of Al (<0.25 wt.%) to Sn-3.5Ag-0.95Cu (SAC3595) solders to promote more consistent solder joint microstructures and to avoid deleterious product phases, e.g., Ag3Sn “blades,” for BGA cooling rates, since such Al additions to SAC had already demonstrated excellent thermal aging stability. Consistent with past work, blade formation was suppressed for increased Al content (>0.05Al), but the suppression effect faded for >0.20Al. Undercooling suppression did not correlate specifically with blade suppression since it became significant at 0.10Al and increased continuously with greater Al to 0.25Al. Surprisingly, an intermediate range of Al content (0.10 wt.% to 0.20 wt.% Al) promoted formation of significant populations of 2-μm to 5-μm faceted Cu-Al particles, identified as Cu33Al17, that clustered at the top of the solder joint matrix and exhibited extraordinary hardness. Clustering of Cu33Al17 was attributed to its buoyancy, from a lower density than Sn liquid, and its early position in the nucleation sequence within the solder matrix, permitting unrestricted migration to the top interface. Joint microstructures and implications for the full nucleation sequence for these SAC + Al solder joints are discussed, along with possible benefits from the clustered particles for improved thermal cycling resistance.

  3. Involvement of CTR1 and ATP7A in lead (Pb)-induced copper (Cu) accumulation in choroidal epithelial cells.

    PubMed

    Zheng, Gang; Zhang, Jieqiong; Xu, Yan; Shen, Xuefeng; Song, Han; Jing, Jinfei; Luo, Wenjing; Zheng, Wei; Chen, Jingyuan

    2014-02-10

    The blood-cerebrospinal fluid barrier (BCB) plays a key role in maintaining copper (Cu) homeostasis in the brain. Cumulative evidences indicate that lead (Pb) exposure alters cerebral Cu homeostasis, which may underlie the development of neurodegenerative diseases. This study investigated the roles of Cu transporter 1 (CTR1) and ATP7A, two Cu transporters, in Pb-induced Cu accumulation in the choroidal epithelial cells. Pb exposure resulted in increased intracellular (64)Cu retention, accompanying with up-regulated CTR1 level. Knockdown of CTR1 using siRNA before Pb exposure diminished the Pb-induced increase of (64)Cu uptake. The expression level of ATP7A was down-regulated following the Pb exposure. ATP7A siRNA knockdown, or PCMB treatment, inhibited the (64)Cu efflux from the cells, while the following additional incubation with Pb failed to further increase the intracellular (64)Cu retention. Cu exposure, or intracellular Cu accumulation following the tetracycline (Tet)-induced overexpression of CTR1, did not result in significant change in ATP7A expression. Taken together, these data indicate that CTR1 and ATP7A play important roles in Cu transport in choroidal epithelial cells, and the Pb-induced intracellular Cu accumulation appears to be mediated, at least in part, via the alteration of CTR1 and ATP7A expression levels following Pb exposure. PMID:24316150

  4. Photoelectron spectroscopic and computational study of (M-CO2)- anions, M = Cu, Ag, Au

    NASA Astrophysics Data System (ADS)

    Zhang, Xinxing; Lim, Eunhak; Kim, Seong K.; Bowen, Kit H.

    2015-11-01

    In a combined photoelectron spectroscopic and computational study of (M-CO2)-, M = Au, Ag, Cu, anionic complexes, we show that (Au-CO2)- forms both the chemisorbed and physisorbed isomers, AuCO 2- and Au-(CO2), respectively; that (Ag-CO2)- forms only the physisorbed isomer, Ag-(CO2); and that (Cu-CO2)- forms only the chemisorbed isomer, CuCO 2- . The two chemisorbed complexes, AuCO 2- and CuCO 2- , are covalently bound, formate-like anions, in which their CO2 moieties are significantly reduced. These two species are examples of electron-induced CO2 activation. The two physisorbed complexes, Au-(CO2) and Ag-(CO2), are electrostatically and thus weakly bound.

  5. New bulk glassy alloys in Cu-Zr-Ag ternary system prepared by casting and milling

    NASA Astrophysics Data System (ADS)

    Janovszky, D.; Tomolya, K.; Sveda, M.; Solyom, J.; Roosz, A.

    2009-01-01

    The thermal stability, crystallization behaviour and glass forming ability of Cu-Zr-Ag system have been investigated on the basis of a ternary phase diagram. We altered the concentration of the alloys from the Cu58Zr42 to the concentration of the deep eutectic point of the Cu-Zr-Ag ternary system and we calculated the glass forming ability parameters. This paper summerises the results of the procedure during which Cu-Zr-Ag amorphous alloys with different Ag content (0-25%) were prepared by casting and ball-milling. Wedge-shaped samples were prepared from the ingots by centrifugal casting into copper mold. The supercooled liquid region (ΔTx) exceeded 75K. Following the characterization of the cast alloys, master alloys of identical composition were milled in a Fritsch Pulverisette 2 ball-mill. The powders, milled for various periods of time were analysed by XRD in order to define the amorphous fraction.

  6. Divalent Cu, Cd, and Pb Biosorption in Mixed Solvents

    PubMed Central

    Al-Qunaibit, M. H.

    2009-01-01

    Dead dried Chlorella vulgaris was studied in terms of its performance in binding divalent copper, cadmium, and lead ions from their aqueous or 50% v/v methanol, ethanol, and acetone solutions. The percentage uptake of cadmium ions exhibited a general decrease with decrease in dielectric constant values, while that of copper and lead ions showed a general decrease with increase in donor numbers. Uptake percentage becomes less sensitive to solvent properties the larger the atomic radius of the biosorbed ion, and uptake of copper was the most affected. FT-IR analyses revealed stability of the biomass in mixed solvents and a shift in vibrations of amide(I) and (II), carboxylate, glucose ring, and metal oxygen upon metal binding in all media. ΔνCOO values (59–69 cm−1) confirmed bidentate metal coordination to carboxylate ligands. The value of νasCOO increased slightly upon Cu, Cd, and Pb biosorption from aqueous solutions indicating lowering of symmetry, while a general decrease was noticed in mixed solvents pointing to the opposite. M–O stretching frequencies increased unexpectedly with increase in atomic mass as a result of solvent effect on the nature of binding sites. Lowering polarity of the solvent permits variations in metal-alga bonds strengths; the smaller the metal ion, the more affected. PMID:19688108

  7. A highly sensitive non-enzymatic glucose sensor based on bimetallic Cu-Ag superstructures.

    PubMed

    Li, Hua; Guo, Chun-Yan; Xu, Cai-Ling

    2015-01-15

    Bimetallic Cu-Ag superstructures were successfully fabricated for the first time by using the natural leaves as reducing agent through a facile one-step hydrothermal process. Morphology, structure and composition of the Cu-Ag superstructures were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and inductively coupled plasma-optical emission spectroscopy (ICP-OES), respectively. The results reveal that the Cu-Ag superstructure is bimetallic nanocomposite constructed by nanoparticles with low Ag content and shows a rough surface and porous flexural algae-like microstructure. By using a three-dimensional nickel foam as the scaffold, a novel non-enzymatic glucose sensor based on Cu-Ag nanocomposites has been fabricated and applied to non-enzymatic glucose detection. The as-prepared Cu-Ag nanocomposites based glucose sensor displays distinctly enhanced electrocatalytic activity compared to those obtained with pure Cu nanomaterials prepared with a similar procedure, revealing a synergistic effect of the matrix Cu and the doped Ag. Cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy indicate that the Cu-Ag superstructures based glucose sensor displays a fascinating sensitivity up to 7745.7 μA mM(-1) cm(-2), outstanding detection limit of 0.08 μM and fast amperometric response (<2 s) for glucose detection. Furthermore, the sensor also exhibits significant selectivity, excellent stability and reproducibility, as well as attractive feasibility for real sample analysis. Because of its excellent electrochemical performance, low cost and easy preparation, this novel electrode material is a promising candidate in the development of non-enzymatic glucose sensor. PMID:25113052

  8. Melting of Pb Nanocrystals Embedded in Al, Si, and Cu Matrices

    NASA Astrophysics Data System (ADS)

    Wang, Huan; Zhu, Hongzhi

    2015-12-01

    Dispersions of nanoscale Pb particles embedded in Si, Al, and Cu matrices have been synthesized by ion implantation and subsequent annealing. The melting transitions of the embedded Pb nanocrystals with epitaxial particle/matrix interfaces were investigated by means of in situ high-temperature X-ray diffraction. Due to different levels of lattice mismatch, the Pb nanoprecipitates experience a different elastic strain in different matrices. Further analysis on the lattice constants of the embedded Pb nanocrystals gives unambiguous evidence of the strain-related pressure effect, which is particle size and matrix dependent, on tuning of the melting behavior of the embedded Pb nanoparticles.

  9. Phase composition and structure of aluminum Al-Cu-Si-Sn-Pb alloys

    NASA Astrophysics Data System (ADS)

    Belov, N. A.; Stolyarova, O. O.; Murav'eva, T. I.; Zagorskii, D. L.

    2016-06-01

    The structure and phase composition of cast and heat treated Al-Cu-Si-Sn-Pb alloys containing 6 wt % Sn, 2 wt % Pb, 0-4 wt % Cu, 0-10 wt % Si have been studied using calculations and experimental methods. Polythermal and isothermal sections are reported, which indicate the existence of two liquid phases. It was found that the low-melting phase is inhomogeneous and consists of individual leadand tin-based particles.

  10. Mechanical Properties and Electrochemical Corrosion Behavior of Al/Sn-9Zn- xAg/Cu Joints

    NASA Astrophysics Data System (ADS)

    Huang, M. L.; Huang, Y. Z.; Ma, H. T.; Zhao, J.

    2011-03-01

    The effect of Ag content on the wetting behavior of Sn-9Zn- xAg on aluminum and copper substrates during soldering, as well as the mechanical properties and electrochemical corrosion behavior of Al/Sn-9Zn- xAg/Cu solder joints, were investigated in the present work. Tiny Zn and coarsened dendritic AgZn3 regions were distributed in the Sn matrix in the bulk Sn-9Zn- xAg solders, and the amount of Zn decreased while that of AgZn3 increased with increasing Ag content. The wettability of Sn-9Zn-1.5Ag solder on Cu substrate was better than those of the other Sn-9Zn- xAg solders but worse than that of Sn-9Zn solder. The wettability of Sn-9Zn-1.5Ag on the Al substrate was also better than those of the other Sn-9Zn- xAg solders, and even better than that of Sn-9Zn solder. The Al/Sn-9Zn/Cu joint had the highest shear strength, and the shear strength of the Al/Sn-9Zn- xAg/Cu ( x = 0 wt.% to 3 wt.%) joints gradually decreased with increasing Ag content. The corrosion resistance of the Sn-9Zn- xAg solders in Al/Sn-9Zn- xAg/Cu joints in 5% NaCl solution was improved compared with that of Sn-9Zn. The corrosion potential of Sn-9Zn- xAg solders continuously increased with increasing Ag content from 0 wt.% to 2 wt.% but then decreased for Sn-9Zn-3Ag. The addition of Ag resulted in the formation of the AgZn3 phase and in a reduction of the amount of the eutectic Zn phase in the solder matrix; therefore, the corrosion resistance of the Al/Sn-9Zn- xAg/Cu joints was improved.

  11. Synthesis of the Pb-based superconductor of the Pb3201 phase (Pb 2Cu)Sr 0.9La 1.1CuO 6+δ by the modified polymerized complex method

    NASA Astrophysics Data System (ADS)

    Kato, Masatsune; Sakuma, Atsushi; Noji, Takashi; Koike, Yoji

    1996-02-01

    We have succeeded in obtaining single-phase samples of the Pb3201 phase (Pb 2Cu)Sr 0.9La 1.1CuO 6+δ by the modified polymerized complex method. At the first step of the synthesis, a transparent gel is found to be obtained by increasing the molar ratio of citric acid to total metal ions up to 5 without controlling the pH of the solution and without ethylene glycol. Secondly, the precursor is prepared by calcining the transparent gel. Finally, highly homogeneous samples with the onset temperature of the superconducting transition, ∼ 37 K, are obtained by sintering the precursor and subsequently annealing it. Moreover, the Pb3201 phase is found to be stable only for x = 1.1 in (Pb 2Cu)Sr 2- xLa xCuO 6+δ.

  12. Effect of Synthesis Techniques on Crystallization and Optical Properties of Ag-Cu Bimetallic Nanoparticles

    NASA Astrophysics Data System (ADS)

    Xiong, Ziye; Qin, Fen; Huang, Po-Shun; Nettleship, Ian; Lee, Jung-Kun

    2016-04-01

    Silver (Ag)-copper (Cu) bimetallic nanoparticles (NPs) were synthesized by the reduction of silver nitrate and copper (II) acetate monohydrate using ethylene glycol in a microwave (MW) heating system with controlled reaction times ranging from 5 min to 30 min. The molar ratio Ag/Cu was varied from 1:1 to 1:3. The effect of reaction conditions on the bimetallic NPs structures and compositions were characterized by x-ray photoelectron spectroscopy, x-ray diffraction and transmission electron microscopy. The average particle size was approximately 150 nm. The surface plasmon resonance (SPR) of Ag-Cu bimetallic NPs was investigated by monitoring the SPR band peak behavior via UV/Vis spectrophotometry. The resonance peak positions and peak widths varied due to the different structures of the bimetallic NPs created under the synthesis conditions. In the MW heating method, the reduction of Cu was increased and Cu was inhomogeneously deposited over the Ag cores. As the composition of Cu becoming higher in the Ag-Cu bimetallic NPs, the absorption between 400 nm to 600 nm was greatly enhanced.

  13. Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

    NASA Astrophysics Data System (ADS)

    Zhao, Jun; Zhang, Dongming; Zhao, Jie

    2011-09-01

    Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu@Ag) core-shell powders.

  14. Microstructural investigation of the oxidation behavior of Cu in Ag-coated Cu films using a focused ion beam transmission electron microscopy technique

    NASA Astrophysics Data System (ADS)

    Kim, Ji Hwan; Lee, Jong-Hyun

    2016-06-01

    With the aim of elucidating a detailed mechanism for the oxidation behavior in submicron Cu particles coated with a thin Ag layer, the dewetting of Ag and the oxidation behavior of Cu in Ag-coated Cu films upon heating were investigated with a focused ion beam transmission electron microscopy technique. A slight dewetting of the Ag layer began at approximately 200 °C and aggregates of Cu2O particles were formed on the Ag layer, indicating that the initial Cu2O phase was formed on the thin Ag layer. Voids were formed in the Cu layer because of Cu atoms diffusing through the thin Ag layer to be oxidized in the upper Cu2O aggregates. After being heated to 250 °C, the Ag layer became more irregular, and in some regions, it disappeared because of intensive dewetting. The number and average size of the voids also increased. At 300 °C, a hollow structure with a Cu2O shell was formed. Pillar-like structures of unoxidized Cu and large voids were found under the Cu2O layer.

  15. Engineering of electronic and optical properties of PbS thin films via Cu doping

    NASA Astrophysics Data System (ADS)

    Touati, Baligh; Gassoumi, Abdelaziz; Dobryden, Illia; Natile, Marta Maria; Vomiero, Alberto; Turki, Najoua Kamoun

    2016-09-01

    Copper-doped PbS polycrystalline thin films were deposited by chemical bath deposition by adding small amount of Cu (ysolution = [Cu2+]/[Pb2+]) between 0.5 and 2 at%. The composition, structure, morphology, optical and electrical properties of the films were investigated by means of X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray photoemission spectroscopy (XPS), UV-visible-near infrared (UV-Vis-NIR) spectrophotometry and Hall effect measurements. The XRD studies showed that the undoped films have PbS face centered cubic structure with (111) preferential orientation, while preferential orientation changes to (200) plane with increasing Cu doping concentration. The AFM and SEM measurements indicated that the film surfaces consisted of nanosized grains with pyramidal shape. Optical band gap was blue shifted from 0.72 eV to 1.69 eV with the increase in Cu doping concentration. The film obtained with the [Cu2+]/[Pb2+] ratio equal to 1.5 at% Cu showed the minimum resistivity of 0.16 Ω cm at room temperature and optimum value of optical band gap close to 1.5 eV. 1.5 at% Cu-doped PbS thin films exhibit the best optical and electrical properties, suitable for solar cells applications.

  16. Cu-Au, Ag-Au, Cu-Ag, and Ni-Au intermetallics: First-principles study of temperature-composition phase diagrams and structures

    NASA Astrophysics Data System (ADS)

    Ozoliņš, V.; Wolverton, C.; Zunger, Alex

    1998-03-01

    The classic metallurgical systems-noble-metal alloys-that have formed the benchmark for various alloy theories are revisited. First-principles fully relaxed general-potential linearized augmented plane-wave (LAPW) total energies of a few ordered structures are used as input to a mixed-space cluster expansion calculation to study the phase stability, thermodynamic properties, and bond lengths in Cu-Au, Ag-Au, Cu-Ag, and Ni-Au alloys. (i) Our theoretical calculations correctly reproduce the tendencies of Ag-Au and Cu-Au to form compounds and Ni-Au and Cu-Ag to phase separate at T=0 K. (ii) Of all possible structures, Cu3Au (L12) and CuAu (L10) are found to be the most stable low-temperature phases of Cu1-xAux with transition temperatures of 530 K and 660 K, respectively, compared to the experimental values 663 K and ~670 K. The significant improvement over previous first-principles studies is attributed to the more accurate treatment of atomic relaxations in the present work. (iii) LAPW formation enthalpies demonstrate that L12, the commonly assumed stable phase of CuAu3, is not the ground state for Au-rich alloys, but rather that ordered (100) superlattices are stabilized. (iv) We extract the nonconfigurational (e.g., vibrational) entropies of formation and obtain large values for the size-mismatched systems: 0.48 kB/atom in Ni0.5Au0.5 (T=1100 K), 0.37 kB/atom in Cu0.141Ag0.859 (T=1052 K), and 0.16 kB/atom in Cu0.5Au0.5 (T=800 K). (v) Using 8 atom/cell special quasirandom structures we study the bond lengths in disordered Cu-Au and Ni-Au alloys and obtain good qualitative agreement with recent extended x-ray-absorption fine-structure measurements.

  17. Surface modification of oleylamine-capped Ag-Cu nanoparticles to fabricate low-temperature-sinterable Ag-Cu nanoink.

    PubMed

    Kim, Na Rae; Lee, Yung Jong; Lee, Changsoo; Koo, Jahyun; Lee, Hyuck Mo

    2016-08-26

    By treating oleylamine (OA)-capped Ag-Cu nanoparticles with tetramethylammonium hydroxide (TMAH), we obtained metal nanoparticles that are suspended in polar solvents and sinterable at low temperatures. The simple process with ultra sonication enables synthesis of monodispersed and high purity nanoparticles in an organic base, where the resulting nanoparticles are dispersible in polar solvents such as ethanol and isopropyl alcohol. To investigate the surface characteristics, we conducted Fourier-transform infrared and zeta-potential analyses. After thermal sintering at 200 °C, which is approximately 150 °C lower than the thermal decomposition temperature of OA, an electrically conductive thin film was obtained. Electrical resistivity measurements of the TMAH-treated ink demonstrate that surface modified nanoparticles have a low resistivity of 13.7 × 10(-6) Ω cm. These results confirm the prospects of using low-temperature sinterable nanoparticles as the electrode layer for flexible printed electronics without damaging other stacked polymer layers. PMID:27454465

  18. Synthesis and anti-bacterial activity of Cu, Ag and Cu-Ag alloy nanoparticles: A green approach

    SciTech Connect

    Valodkar, Mayur; Modi, Shefaly; Pal, Angshuman; Thakore, Sonal

    2011-03-15

    Research highlights: {yields} Synthesis of novel nanosized copper-silver alloys of different compositions. {yields} Completely green approach for synthesis of water soluble bimetallic nanoparticle. {yields} Interesting anti-bacterial activity of as synthesized metal and alloy nanoparticle. -- Abstract: Metallic and bimetallic nanoparticles of copper and silver in various proportions were prepared by microwave assisted chemical reduction in aqueous medium using the biopolymer, starch as a stabilizing agent. Ascorbic acid was used as the reducing agent. The silver and copper nanoparticles exhibited surface plasmon absorption resonance maxima (SPR) at 416 and 584 nm, respectively; while SPR for the Cu-Ag alloys appeared in between depending on the alloy composition. The SPR maxima for bimetallic nanoparticles changes linearly with increasing copper content in the alloy. Transmission electron micrograph (TEM) showed monodispersed particles in the range of 20 {+-} 5 nm size. Both silver and copper nanoparticles exhibited emission band at 485 and 645 nm, respectively. The starch-stabilized nanoparticles exhibited interesting antibacterial activity with both gram positive and gram negative bacteria at micromolar concentrations.

  19. Atmospheric Corrosion of Ag and Cu with Ozone, UV and NaCl

    NASA Astrophysics Data System (ADS)

    Lin, Huang

    Ag and Cu are both used for electronics and are susceptible to atmospheric corrosion. They are also good corrosivity monitors used to evaluate aggressiveness of the environment. Unfortunately, laboratory exposure testing does not always represent field environments very well. Discrepancies between lab and field exposure tests are not uncommon. For example, Ag does not corrode in salt spray exposure during ASTM B117 test, while it corrodes everywhere outdoor. This suggests that new laboratory exposure test for Ag needs to be designed and studied. A full factorial experiment was carried out with three factors: ozone, UV intensity and relative humidity (RH). NaCl was loaded by fast evaporation of NaCl/ethanol solution before exposure. After exposure, corrosion products were identified by XRD and quantified by galvanostatic reduction technique. For lab exposure samples, AgCl was identified as the only corrosion product in high RH (87%) environments, while Ag2O and AgO formed as well during exposures at low RH. This result derived a qualitative prediction on corrosion behavior of Ag in field. It predicts that less stable silver compounds such as oxide and sulfate are possible corrosion products in field even silver chloride is the dominant corrosion product forming in field. This prediction was confirmed by analysis of field exposed Ag samples. By quantification of corrosion products, it is determined that UV has two contravening effects on atmospheric corrosion of Ag: photolysis of ozone to generate stronger oxidizing species such as atomic O and photodecomposition of Ag corrosion products by UV radiation. Following its success in Ag corrosion research, the environment of UV, ozone and NaCl was extended to study Cu corrosion. It is determined that UV alone can double Cu corrosion rate by generation of electron-hole pairs in n-type cuprous oxide. It is also found that ozone alone is not as aggressive on Ag as on Cu because protection of naturally formed cuprous oxide

  20. Electron correlation and relativistic effects in the coinage metal compounds. II. Heteronuclear dimers: CuAg, CuAu, and AgAu

    NASA Astrophysics Data System (ADS)

    Kellö, Vladimir; Sadlej, Andrzej J.

    1995-08-01

    Electric properties of heteronuclear dimers of the coinage metals are calculated at the level of the CCSD(T) approximation applied to 38 electrons of the valence and next-to-valence atomic shells. The relativistic effects are accounted for by using the scalar approximation to the Pauli hamiltonian. Both the pure relativistic and mixed relativistic-correlation contributions to energies and electric properties are computed. All calculations have been carried out by using the recently developed first-order polarized basis sets of the coinage metal atoms. In the non-relativistic approximation all studied dimers show only a moderate degree of polarity; the non-relativistic CuAg turns out to be the most polar dimer with the Cu(-)Ag(+) polarity. The relativistic effects considerably reduce the negative value of the CuAg dipole moment, change the sign of the CuAu dipole moment, and make the AgAu molecule the most polar species in the series. Simultaneously, the parallel component of the dipole polarizability shows only a small relativistic contraction. The calculated quasirelativistic interaction potentials have a correct behavior in the vicinity of their minima and give the Re and ωe values in complete agreement with experiment. Much less satisfactory are the dissociation energy data which seem to suffer from the single reference configuration approximation.

  1. Kinetic trapping through coalescence and the formation of patterned Ag-Cu nanoparticles

    NASA Astrophysics Data System (ADS)

    Grammatikopoulos, Panagiotis; Kioseoglou, Joseph; Galea, Antony; Vernieres, Jerome; Benelmekki, Maria; Diaz, Rosa E.; Sowwan, Mukhles

    2016-05-01

    In recent years, due to its inherent flexibility, magnetron-sputtering has been widely used to synthesise bi-metallic nanoparticles (NPs) via subsequent inert-gas cooling and gas-phase condensation of the sputtered atomic vapour. Utilising two separate sputter targets allows for good control over composition. Simultaneously, it involves fast kinetics and non-equilibrium processes, which can trap the nascent NPs into metastable configurations. In this study, we observed such configurations in immiscible, bi-metallic Ag-Cu NPs by scanning transmission electron microscopy (S/TEM) and electron energy-loss spectroscopy (EELS), and noticed a marked difference in the shape of NPs belonging to Ag- and Cu-rich samples. We explained the formation of Janus or Ag@Cu core/shell metastable structures on the grounds of in-flight mixed NP coalescence. We utilised molecular dynamics (MD) and Monte Carlo (MC) computer simulations to demonstrate that such configurations cannot occur as a result of nanoalloy segregation. Instead, sintering at relatively low temperatures can give rise to metastable structures, which eventually can be stabilised by subsequent quenching. Furthermore, we compared the heteroepitaxial diffusivities along various surfaces of both Ag and Cu NPs, and emphasised the differences between the sintering mechanisms of Ag- and Cu-rich NP compositions: small Cu NPs deform as coherent objects on large Ag NPs, whereas small Ag NPs dissolve into large Cu NPs, with their atoms diffusing along specific directions. Taking advantage of this observation, we propose controlled NP coalescence as a method to engineer mixed NPs of a unique, patterned core@partial-shell structure, which we refer to as a ``glass-float'' (ukidama) structure.In recent years, due to its inherent flexibility, magnetron-sputtering has been widely used to synthesise bi-metallic nanoparticles (NPs) via subsequent inert-gas cooling and gas-phase condensation of the sputtered atomic vapour. Utilising two

  2. Interfacial Phenomena in Al/Al, Al/Cu, and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

    NASA Astrophysics Data System (ADS)

    Pstruś, Janusz; Gancarz, Tomasz

    2014-05-01

    The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)EUT, (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.

  3. Syntheses and crystal structures of new chain-containing iodometallate compounds: [H1,10-phen](H 2O) 1.41[AgI 2], [H1,10-phen](H 2O) 1.42[CuI 2]; [Co(tpy) 2][Bi 2I 8], [Fe(tpy) 2][Bi 2I 8]; [Co(1,10-phen) 3][Pb 3I 8]·H 2O, and [Fe(1,10-phen) 3][Pb 3I 8]·0.5(H 2O)

    NASA Astrophysics Data System (ADS)

    Tershansy, Meredith A.; Goforth, Andrea M.; Peterson, LeRoy; Burns, M. C.; Smith, Mark D.; zur Loye, Hans-Conrad

    2007-10-01

    Three pairs of novel, isostructural polymeric iodometallate compounds, [H1,10-phen](H 2O) 1.41[AgI 2] ( 1) ([H1,10-phen] + = [1,10-phenanthrolinium] +), [H1,10-phen](H 2O) 1.42[CuI 2] ( 2), [Co(tpy) 2][Bi 2I 8] ( 3) (tpy = 2,2':6'2″-terpyridine), [Fe(tpy) 2][Bi 2I 8] ( 4), [Co(1,10-phen) 3][Pb 3I 8]·H 2O ( 5) (1,10-phen = 1,10-phenanthroline), and [Fe(1,10-phen) 3][Pb 3I 8]·0.5(H 2O) ( 6) have been synthesized solvothermally and characterized by single crystal X-ray diffraction. Compounds 1 and 2 are isostructural and crystallize in the orthorhombic space group Cmma with lattice parameters of a = 6.7063(7) Å, b = 17.6051(18) Å, c = 12.7088(13) Å and a = 6.5770(3) Å, b = 17.5245(8) Å, c = 12.5515(6) Å, respectively. The polymeric anionic chains in 1 and 2 are formed by edge-sharing MI 4 (M = Ag, Cu) tetrahedra. Compounds 3 and 4 are isostructural and crystallize in the monoclinic space group P2 1/ n with lattice parameters of a = 16.5085(7) Å, b = 16.0392(7) Å, c = 16.5115(7) Å, β = 97.4710(10)° and a = 16.4478(6) Å, b = 16.0645(6) Å, c = 16.4498(6) Å, β = 97.4490(10)°, respectively. Both structures contain the first observed, face-sharing [Bi 2I 8] 2- anion cluster that is linked via corner sharing into infinite zig-zag anionic chains. Compounds 5 and 6 are isostructural and crystallize in the triclinic space group P1¯ with lattice parameters of a = 11.8798(5) Å, b = 15.2805(7) Å, c = 16.1889(7) Å, α = 63.9240(10)°, β = 74.0420(10)°, γ = 73.2540(10)° and a = 11.7889(5) Å, b = 15.3224(6) Å, c = 16.2584(6) Å, α = 64.1920(10)°, β = 73.5600(10)°, and γ = 73.7120(10)°, respectively. Compounds 5 and 6 contain infinite [Pb 3I 8] 2- chains in which the three crystallographically unique Pb 2+ ions are found in sets of three trans face-sharing octahedra. These face-sharing trimers are observed in pairs that share three edges, and the pairs are further connected into 1-D chains by edge sharing with neighboring 2 × 3 units.

  4. Ages and sources of components of Zn-Pb, Cu, precious metal, and platinum group element deposits in the goodsprings district, clark county, Nevada

    USGS Publications Warehouse

    Vikre, P.; Browne, Q.J.; Fleck, R.; Hofstra, A.; Wooden, J.

    2011-01-01

    The Goodsprings district, Clark County, Nevada, includes zinc-dominant carbonate replacement deposits of probable late Paleozoic age, and lead-dominant carbonate replacement deposits, copper ?? precious metal-platinum group element (PGE) deposits, and gold ?? silver deposits that are spatially associated with Late Triassic porphyritic intrusions. The district encompasses ??500 km2 although the distribution of all deposits has been laterally condensed by late Mesozoic crustal contraction. Zinc, Pb, and Cu production from about 90 deposits was ??160,000 metric tons (t) (Zn > Pb >> Cu), 2.1 million ounces (Moz) Ag, 0.09 Moz Au, and small amounts of PGEs-Co, V, Hg, Sb, Ni, Mo, Mn, Ir, and U-were also recovered. Zinc-dominant carbonate replacement deposits (Zn > Pb; Ag ?? Cu) resemble Mississippi Valley Type (MVT) Zn-Pb deposits in that they occur in karst and fault breccias in Mississippian limestone where the southern margin of the regional late Paleozoic foreland basin adjoins Proterozoic crystalline rocks of the craton. They consist of calcite, dolomite, sphalerite, and galena with variably positive S isotope compositions (??34S values range from 2.5-13%), and highly radiogenic Pb isotope compositions (206Pb/204Pb >19), typical of MVT deposits above crystalline Precambrian basement. These deposits may have formed when southward flow of saline fluids, derived from basinal and older sedimentary rocks, encountered thinner strata and pinch-outs against the craton, forcing fluid mixing and mineral precipitation in karst and fault breccias. Lead-dominant carbonate replacement deposits (Pb > Zn, Ag ?? Cu ?? Au) occur among other deposit types, often near porphyritic intrusions. They generally contain higher concentrations of precious metals than zinc-dominant deposits and relatively abundant iron oxides after pyrite. They share characteristics with copper ?? precious metal- PGE and gold ?? silver deposits including fine-grained quartz replacement of carbonate minerals in

  5. Nano-Nucleation Characteristic of Cu-Ag Alloy Directly Electrodeposited on W Diffusion Barrier for Microelectronic Device Interconnect.

    PubMed

    Kim, Kang O; Kim, Sunjung

    2016-05-01

    Cu-Ag alloy interconnect is promising for ultra-large-scale integration (ULSI) microelectronic system of which device dimension keeps shrinking. In this study, seedless electrodeposition of Cu-Ag alloy directly on W diffusion barrier as interconnect technology is presented in respect of nano-nucleation control. Chemical equilibrium state of electrolyte was fundamentally investigated according to the pH of electrolyte because direct nano-nucleation of Cu-Ag alloy on W surface is challenging. Chelation behavior of Cu2+ and Ag+ ions with citrate (Cit) and ammonia ligands was dependent on the pH of electrolyte. The amount and kind of Cu- and Ag-based complexes determine the deposition rate, size, elemental composition, and surface morphology of Cu-Ag alloy nano-nuclei formed on W surface. PMID:27483895

  6. Novel PdAgCu ternary alloy: Hydrogen permeation and surface properties

    NASA Astrophysics Data System (ADS)

    Tarditi, Ana M.; Braun, Fernando; Cornaglia, Laura M.

    2011-05-01

    Dense PdAgCu ternary alloy composite membranes were synthesized by the sequential electroless plating of Pd, Ag and Cu on top of both disk and tubular porous stainless steel substrates. X-ray diffraction and scanning electron microscopy were employed to study the structure and morphology of the tested samples. The hydrogen permeation performance of these membranes was investigated over a 350-450 °C temperature range and a trans-membrane pressure up to 100 kPa. After annealing at 500 °C in hydrogen stream followed by permeation experiments, the alloy layer presented a FCC crystalline phase with a bulk concentration of 68% Pd, 7% Ag and 25% Cu as revealed by EDS. The PdAgCu tubular membrane was found to be stable during more than 300 h on hydrogen stream. The permeabilities of the PdAgCu ternary alloy samples were higher than the permeabilities of the PdCu alloy membranes with a FCC phase. The co-segregation of silver and copper to the membrane surface was observed after hydrogen permeation experiments at high temperature as determined by XPS.

  7. Microstructural evolution of a lead-free solder alloy Sn-Bi-Ag-Cu prepared by mechanical alloying during thermal shock and aging

    NASA Astrophysics Data System (ADS)

    Huang, M. L.; Wu, C. M. L.; Lai, J. K. L.; Chan, Y. C.

    2000-08-01

    In a previous study, a lead-free solder, Sn-6Bi-2Ag-0.5Cu, was developed by mechanical alloying. The alloy shows great potential as a lead-free solder system. In the present work, the microstructural evolution during thermal shock and aging was examined. In the as-soldered joints small bismuth (1 µm to 2 µm) and Ag3Sn (1 µm) particles were finely dispersed in a nearly pure tin matrix with a small amount of η-Cu6Sn5 phase in the bulk of solder. During thermal shock and aging microstructural evolution occurred with Cu-Sn intermetallic compound (IMC) layer growth at interface, bismuth phase coarsening and Ag3Sn phase coarsening. The microstructure of the solder appeared to be stable at high temperature. The shear strength of the present solder joint is higher than that of Sn-37Pb and Sn-3.5Ag solders. Shear failure occurred Cu-Sn IMC layer-solder interface and in the bulk of solder.

  8. Ag- and Cu-doped multifunctional bioactive nanostructured TiCaPCON films

    NASA Astrophysics Data System (ADS)

    Shtansky, D. V.; Batenina, I. V.; Kiryukhantsev-Korneev, Ph. V.; Sheveyko, A. N.; Kuptsov, K. A.; Zhitnyak, I. Y.; Anisimova, N. Yu.; Gloushankova, N. A.

    2013-11-01

    A key property of multicomponent bioactive nanostructured Ti(C,N)-based films doped with Ca, P, and O (TiCaPCON) that can be improved further is their antibacterial effect that should be achieved without compromising the implant bioactivity and biocompatibility. The present work is focused on the study of structure, chemical, mechanical, tribological, and biological properties of Ag- and Cu-doped TiCaPCON films. The films with Ag (0.4-4 at.%) and Cu (13 at.%) contents were obtained by simultaneous sputtering of a TiC0.5-Ca3(PO4)2 target and either an Ag or a Cu target. The film structure was studied using X-ray diffraction, transmission and scanning electron microscopy, energy dispersive X-ray spectroscopy, glow discharge optical emission spectroscopy, and Raman-shift and IR spectroscopy. The films were characterized in terms of their hardness, elastic modulus, dynamic impact resistance, friction coefficient and wear rate (both in air and normal saline), surface wettability, electrochemical behavior and Ag or Cu ion release in normal saline. Particular attention was paid to the influence of inorganic bactericides (Ag and Cu ions) on the bactericidal activity against unicellular yeast fungus Saccharomyces cerevisiae and gram-positive bacteria Lactobacillus acidophilus, as well as on the attachment, spreading, actin cytoskeleton organization, focal adhesions, and early stages of osteoblastic cell differentiation. The obtained results show that the Ag-doped films are more suitable for the protection of metallic surfaces against bacterial infection compared with their Cu-doped counterpart. In particular, an excellent combination of mechanical, tribological, and biological properties makes Ag-doped TiCaPCON film with 1.2 at.% of Ag very attractive material for bioengineering and modification of load-bearing metal implant surfaces.

  9. High glass-forming ability correlated with fragility of Mg-Cu(Ag)-Gd alloys

    NASA Astrophysics Data System (ADS)

    Zheng, Qiang; Xu, Jian; Ma, Evan

    2007-12-01

    We report bulk metallic glasses with critical diameter (Dc) in the 20-27mm range over a relatively wide composition range in the Mg-Cu-Ag-Gd quaternary system. Such an extraordinary glass-forming ability is correlated with the relatively strong liquid behavior of these alloys in terms of Angell's [Science 267, 1924 (1995)] fragility concept. The relaxation time of the ternary Mg61Cu28Gd11 and quaternary Mg59.5Cu22.9Ag6.6Gd11 alloys was measured. In terms of the fragility parameter D*, the Mg59.5Cu22.9Ag6.6Gd11 alloy with a critical diameter of 27mm under copper mold casting has a D* of 25, higher than all the bulk metallic glass-forming alloys reported so far. The implications of these findings are discussed.

  10. Kinetic trapping through coalescence and the formation of patterned Ag-Cu nanoparticles.

    PubMed

    Grammatikopoulos, Panagiotis; Kioseoglou, Joseph; Galea, Antony; Vernieres, Jerome; Benelmekki, Maria; Diaz, Rosa E; Sowwan, Mukhles

    2016-05-14

    In recent years, due to its inherent flexibility, magnetron-sputtering has been widely used to synthesise bi-metallic nanoparticles (NPs) via subsequent inert-gas cooling and gas-phase condensation of the sputtered atomic vapour. Utilising two separate sputter targets allows for good control over composition. Simultaneously, it involves fast kinetics and non-equilibrium processes, which can trap the nascent NPs into metastable configurations. In this study, we observed such configurations in immiscible, bi-metallic Ag-Cu NPs by scanning transmission electron microscopy (S/TEM) and electron energy-loss spectroscopy (EELS), and noticed a marked difference in the shape of NPs belonging to Ag- and Cu-rich samples. We explained the formation of Janus or Ag@Cu core/shell metastable structures on the grounds of in-flight mixed NP coalescence. We utilised molecular dynamics (MD) and Monte Carlo (MC) computer simulations to demonstrate that such configurations cannot occur as a result of nanoalloy segregation. Instead, sintering at relatively low temperatures can give rise to metastable structures, which eventually can be stabilised by subsequent quenching. Furthermore, we compared the heteroepitaxial diffusivities along various surfaces of both Ag and Cu NPs, and emphasised the differences between the sintering mechanisms of Ag- and Cu-rich NP compositions: small Cu NPs deform as coherent objects on large Ag NPs, whereas small Ag NPs dissolve into large Cu NPs, with their atoms diffusing along specific directions. Taking advantage of this observation, we propose controlled NP coalescence as a method to engineer mixed NPs of a unique, patterned core@partial-shell structure, which we refer to as a "glass-float" (ukidama) structure. PMID:27119383

  11. Geology and mineralogy of the Santo Nino Ag-Pb-Zn vein, Fresnillo District, Mexico

    SciTech Connect

    Gemmell, J.B.; Zantop, H.; Birnie, R.W.

    1985-01-01

    The Santo Nino Ag-Pb-Zn vein is the major producer of the Fresnillo District, located 750 km NW of Mexico City. It is over 2.4 km long, more than 480 m in vertical extent, more than 2.5 m wide overall, and has average grades of >600 gm/t Ag and <2% combined Pb and Zn. The vein is hosted by a tilted sequence of Cretaceous graywackes, shales and andesitic volcanics and extends upward into a Lower Tertiary conglomerate. Up to 5 separate opening events occurred along the vein, resulting in discontinuous stages of brecciation and crustiform banding. Ore mineral zonation is well developed both vertically and laterally and closely reflects metal and metal ratio distributions. Ore minerals are sphalerite, galena, pyrite, chalcopyrite, arsenopyrite, marcasite, pyrrhotite, acanthite, native silver, and three coexisting solid solution series, pyrargyrite-proustite, polybasite-arsenopolybasite, and tetrahedrite-tennantite in a gangue of quartz, calcite, clay, sericite,and chlorite. A 5-stage paragenetic sequence can be established: 1) pyrite, arsenopyrite, quartz, 2) sphalerite, galena, chalcopyrite, quartz, 3) tetrahedrite, pyrargyrite, polybasite, quartz, 4) acanthite, native silver, calcite, quartz, and 5) calcite. Preliminary microprobe analyses indicate that the Ag-rich solid solution series are Sb-rich in the central and upper portions of the vein and As-rich at deeper levels.

  12. Study of tribological behavior of Cu-MoS2 and Ag-MoS2 nanocomposite lubricants.

    PubMed

    An, V; Anisimov, E; Druzyanova, V; Burtsev, N; Shulepov, I; Khaskelberg, M

    2016-01-01

    Tribological behavior of Cu-MoS2 and Ag-MoS2 nanocomposite lubricant was studied. Cu nanoparticles produced by electrical explosion of copper wires and Ag nanoparticles prepared by electrospark erosion were employed as metal cladding modifiers of MoS2 nanolamellar particles. The tribological tests showed Cu-MoS2 and Ag-MoS2 nanocomposite lubricants changed the friction coefficient of the initial grease and essentially improved its wear resistance. PMID:26837277

  13. Distribution of Ag in Cu-sulfides in Kupferschiefer deposit, SW Poland

    NASA Astrophysics Data System (ADS)

    Kozub, Gabriela A.

    2014-05-01

    The Cu-Ag Kupferschiefer deposit located at the Fore-Sudetic Monocline (SW Poland) is a world class deposit of stratabound type. The Cu-Ag mineralization in the deposit occurs in the Permian sedimentary rocks (Rotliegend and Zechstein) in three lithological types of ore: the dolomite, the black shale and the sandstone. Silver, next to copper, is the most important element in the Kupferschiefer deposit (Salamon 1979; Piestrzyński 2007; Pieczonka 2011). Although occurrence of the Ag-minerals such as native silver, silver amalgams, stromeyerite, jalpaite and mckinstryite, silver is mainly present in the deposit due to isomorphic substitutions in Cu-minerals such as chalcocite, bornite, tennantite, covellite and chalcopyrite. The aim of the study was to define distribution of silver in Cu-minerals and correlate occurrence of Ag-enriched Cu-sulfides with native silver and silver amalgams. Identification of minerals and textural observation were performed using field emission scanning electron microscope. Analyzes of chemical composition of Cu-sulfides were performed utilizing electron microprobe. Silver concentration in Cu sulfides ranges from 0.1 to 10.4 wt.% in chalcocite, 0.2-15.8 wt.% in bornite, 0.1-2.9 wt.% in tennantite, 0.05-0.3 wt.% in chalcopyrite and ca. 0.4 wt.% in covellite. In general, distribution of silver in Cu-minerals is irregular, as indicated by high variations of Ag concentration in each mineral. Content of Ag in Cu-sulphides, in samples where native silver and silver amalgams are not found, is lower than in samples, where native silver and silver amalgams are noted. The chemical analyzes of Ag-bearing Cu-minerals indicate decrease of Cu content in minerals with high Ag concentration. In such case, decrease of Fe content is also noted in bornite. Lack of micro-inclusions of the native silver or silver amalgams in the Cu-minerals indicates that presence of Ag is mainly related to the isomorphic substitutions. This is in agreement with previous

  14. Luminescent Ag i-Cu i heterometallic hexa-, octa-, and hexadecanuclear alkynyl complexes.

    PubMed

    Wei, Qiao-Hua; Yin, Gang-Qiang; Zhang, Li-Yi; Shi, Lin-Xi; Mao, Zong-Wan; Chen, Zhong-Ning

    2004-05-31

    A series of Ag(I)-Cu(I) heteronuclear alkynyl complexes were prepared by reaction of polymeric (MCCC(6)H(4)R-4)(n)() (M = Cu(I) or Ag(I); R = H, CH(3), OCH(3), NO(2), COCH(3)) with [M'(2)(mu-Ph(2)PXPPh(2))(2)(MeCN)(2)](ClO(4))(2) (M' = Ag(I) or Cu(I); X = NH or CH(2)). Heterohexanuclear complexes [Ag(4)Cu(2)(mu-Ph(2)PNHPPh(2))(4)(CCC(6)H(4)R-4)(4)](ClO(4))(2) (R = H, 1; CH(3), 2) were afforded when X = NH, and heterooctanuclear complexes [Ag(6)Cu(2)(micro-Ph(2)PCH(2)PPh(2))(3)(CCC(6)H(4)R-4)(6)(MeCN)](ClO(4))(2) (R = H, 3; CH(3), 4; OCH(3), 5; NO(2), 6) were isolated when X = CH(2). Self-assembly reaction between (MCCC(6)H(4)COCH(3)-4)(n) and [M'(2)(mu-Ph(2)PCH(2)PPh(2))(2)(MeCN)(2)](ClO(4))(2), however, gave heterohexadecanuclear complex [Ag(6)Cu(2)(micro-Ph(2)PCH(2)PPh(2))(3)(CCC(6)H(4)COCH(3)-4)(6)](2)(ClO(4))(4) (7). The heterohexanuclear complexes 1 and 2 show a bicapped cubic skeleton (Ag(4)Cu(2)C(4)) consisting of four Ag(I) and two Cu(I) atoms and four acetylide C donors. The heterooctanuclear complexes 3-6 exhibit a waterwheel-like structure that can be regarded as two Ag(3)Cu(CCC(6)H(5))(3) components put together by three bridging Ph(2)PCH(2)PPh(2) ligands. The heterohexadecanuclear complex 7 can be viewed as a dimer of heterooctanuclear complex [Ag(6)Cu(2)(micro-Ph(2)PCH(2)PPh(2))(3)(CCC(6)H(4)COCH(3)-4)(6)](ClO(4))(2) through the silver and acetyl oxygen (Ag-O = 2.534 (4) A) linkage between two waterwheel-like Ag(6)Cu(2) units. All of the complexes show intense luminescence in the solid states and in fluid solutions. The microsecond scale of lifetimes in the solid state at 298 K reveals that the emission is phosphorescent in nature. The emissive state in compounds 1-5 is likely derived from a (3)LMCT (CCC(6)H(4)R-4 --> Ag(4)Cu(2) or Ag(6)Cu(2)) transition, mixed with a metal cluster-centered (d --> s) excited state. The lowest lying excited state in compounds 6 and 7 containing electron-deficient 4-nitrophenylacetylide and 4-acetylphenylacetylide

  15. Pd-Cu(2)O and Ag-Cu(2)O hybrid concave nanomaterials for an effective synergistic catalyst.

    PubMed

    Li, Lingling; Chen, Xiaobin; Wu, Yuen; Wang, Dingsheng; Peng, Qing; Zhou, Gang; Li, Yadong

    2013-10-11

    Palladium and silver salts were combined with Cu2 O octadecahedra in concave heterostructures. The formation of concave faces involved selective oxidative etching of Cu2 O on the {100} faces and in situ growth of Pd/Ag on different sites. The structures showed superior catalytic activities to both single domains and their mixtures in a model Sonogashira-type organic reaction. PMID:24038721

  16. (Ag,Cu)-Ta-O ternaries as high-temperature solid-lubricant coatings.

    PubMed

    Gao, Hongyu; Otero-de-la-Roza, Alberto; Gu, Jingjing; Stone, D'Arcy; Aouadi, Samir M; Johnson, Erin R; Martini, Ashlie

    2015-07-22

    Ternary oxides have gained increasing attention due to their potential use as solid lubricants at elevated temperatures. In this work, the tribological properties of three ternary oxides-AgTaO3, CuTaO3, and CuTa2O6-were studied using a combination of density-functional theory (DFT), molecular dynamics (MD) simulations with newly developed empirical potential parameters, and experimental measurements (AgTaO3 and CuTa2O6 only). Our results show that the MD-predicted friction force follows the trend AgTaO3 < CuTaO3 < CuTa2O6, which is consistent with the experimentally measured coefficients of friction. The wear performance from both MD and experiment exhibits the opposite trend, with CuTa2O6 providing the best resistance to wear. The sliding mechanisms are investigated using experimental characterization of the film composition after sliding, quantification of Ag or Cu cluster formation at the interface during the evolution of the film in MD, and DFT energy barriers for atom migration on the material surface. All our observations are consistent with the hypothesis that the formation of metal (or metal oxide) clusters on the surface are responsible for the friction and wear behavior of these materials. PMID:26106877

  17. Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites

    SciTech Connect

    An, X. H. E-mail: xiaozhou.liao@sydenye.edu.au; Cao, Y.; Liao, X. Z. E-mail: xiaozhou.liao@sydenye.edu.au; Zhu, S. M.; Nie, J. F.; Kawasaki, M.; Ringer, S. P.; Langdon, T. G.; Zhu, Y. T.

    2015-07-06

    We report an atomic-scale investigation of interface-facilitated deformation twinning behaviour in Ag-Cu nanolamellar composites. Profuse twinning activities in Ag supply partial dislocations to directly transmit across the Ag-Cu lamellar interface that promotes deformation twinning in the neighbouring Cu lamellae although the interface is severely deformed. The trans-interface twin bands change the local structure at the interface. Our analysis suggests that the orientation relationship and interfacial structure between neighbouring Ag-Cu lamellae play a crucial role in such special interface-facilitated twinning behaviour.

  18. The Reliability of Microalloyed Sn-Ag-Cu Solder Interconnections Under Cyclic Thermal and Mechanical Shock Loading

    NASA Astrophysics Data System (ADS)

    Mattila, Toni T.; Hokka, Jussi; Paulasto-Kröckel, Mervi

    2014-11-01

    In this study, the performance of three microalloyed Sn-Ag-Cu solder interconnection compositions (Sn-3.1Ag-0.52Cu, Sn-3.0Ag-0.52Cu-0.24Bi, and Sn-1.1Ag-0.52Cu-0.1Ni) was compared under mechanical shock loading (JESD22-B111 standard) and cyclic thermal loading (40 ± 125°C, 42 min cycle) conditions. In the drop tests, the component boards with the low-silver nickel-containing composition (Sn-Ag-Cu-Ni) showed the highest average number of drops-to-failure, while those with the bismuth-containing alloy (Sn-Ag-Cu-Bi) showed the lowest. Results of the thermal cycling tests showed that boards with Sn-Ag-Cu-Bi interconnections performed the best, while those with Sn-Ag-Cu-Ni performed the worst. Sn-Ag-Cu was placed in the middle in both tests. In this paper, we demonstrate that solder strength is an essential reliability factor and that higher strength can be beneficial for thermal cycling reliability but detrimental to drop reliability. We discuss these findings from the perspective of the microstructures and mechanical properties of the three solder interconnection compositions and, based on a comprehensive literature review, investigate how the differences in the solder compositions influence the mechanical properties of the interconnections and discuss how the differences are reflected in the failure mechanisms under both loading conditions.

  19. Carbonate-replacement Pb-Zn-Ag ± Au mineralization in the Kamariza area, Lavrion, Greece: Mineralogy and thermochemical conditions of formation

    NASA Astrophysics Data System (ADS)

    Voudouris, P.; Melfos, V.; Spry, P. G.; Bonsall, T. A.; Tarkian, M.; Solomos, Ch.

    2008-09-01

    Carbonate-replacement Pb-Zn-Ag ± Au deposits in the Kamariza area, Lavrion district, Attica, Greece, are genetically related to the emplacement of Miocene andesitic dikes within a rapidly extending continental back-arc basin, which formed during exhumation of the Attic-Cycladic Crystalline Belt. Replacement veins as well as chimneys and mantos of massive sulfides are the major orebody types with mantos grading into chimneys and veins. Ore minerals are similar among the various types of orebodies in the Kamariza area and consist of sulfides and sulfarsenides (pyrite, arsenopyrite, chalcopyrite, galena, sphalerite, gersdorffite, marcasite), native metals (Au and Bi), Sn-bearing phases (petrukite), sulfosalts and sulfbismuthites of Ag, Bi, Cu, Pb, As, Sb (tetrahedrite-group minerals, bournonite, boulangerite, stephanite, pyrargyrite, semseyite, enargite, bismuthinite, lillianite homologues, Cu-matildite, aikinite, Ag-aikinite, mummeite, emplectite, wittichenite). The elemental association of Bi, Au, and Ag is common. The assemblages gersdorffite-bismuthinite-native gold and native gold-native bismuth are evidence for a contribution of magmatic components to the hydrothermal system. A fluctuation in the sulfidation states of the ore fluid during the evolution of the Kamariza system is evident from the deposition of early arsenopyrite, as well as of enargite-luzonite and both low-Fe and Fe-rich sphalerite in the same samples. Microthermometry of fluid inclusion assemblages show that carbonate replacement mineralization was deposited from a warm to hot (100°C to 400°C), low to moderately saline (1.8 to 17.3 wt% NaCl equiv) fluid. Eutectic temperatures of fluid inclusions as low as -55°C suggest the presence of CaCl2 in addition to NaCl, in the ore fluid. The Kamariza deposit occurs distal to the Plaka granodiorite intrusion and the associated porphyry-Mo mineralization, but is likely to be genetically related to a granitoid buried at depth.

  20. BRAZING OF POROUS ALUMINA TO MONOLITHIC ALUMINA WITH Ag-CuO and Ag-V2O5 ALLOYS

    SciTech Connect

    Lamb, M. C.; Camardello, Sam J.; Meier, Alan; Weil, K. Scott; Hardy, John S.

    2005-01-31

    The feasibility of joining porous alumina (Al{sub 2}O{sub 3}) bodies to monolithic Al{sub 2}O{sub 3} using Ag-CuO and Ag-V{sub 2}O{sub 5} alloys via reactive air brazing (RAB) was examined for a nanoporous filter application. Brazing for these systems is complicated by the conflicting requirements of satisfactory wetting to fill the braze gap, while minimizing the infiltration of the porous body. By varying the firing time, temperature, and initial powder size, porous bodies with a range of pore microstructures were fabricated. The wettability was evaluated via sessile drop testing on monolithic substrates and porous body infiltration. Porous Al{sub 2}O{sub 3}/monolithic Al{sub 2}O{sub 3} brazed samples were fabricated, and the microstructures were evaluated. Both systems exhibited satisfactory wetting for brazing, but two unique types of brazing behavior were observed. In the Ag-CuO system, the braze alloy infiltrated a short distance into the porous body. For these systems, the microstructures indicated satisfactory filling of the brazed gap and a sound joint regardless of the processing conditions. The Ag-V{sub 2}O{sub 5} alloys brazed joints exhibited a strong dependence on the amount of V{sub 2}O{sub 5} available. For Ag-V{sub 2}O{sub 5} alloys with large V{sub 2}O{sub 5} additions, the braze alloy aggressively infiltrated the porous body and significantly depleted the Ag from the braze region resulting in poor bonding and large gaps within the joint. With small additions of V{sub 2}O{sub 5}, the Ag infiltrated the porous body until the V{sub 2}O{sub 5} was exhausted and the Ag remaining at the braze interlayer bonded with the Al{sub 2}O{sub 3}. Based on these results, the Ag-CuO alloys have the best potential for brazing porous Al{sub 2}O{sub 3} to monolithic Al{sub 2}O{sub 3}.

  1. Energetics of the formation of Cu-Ag core–shell nanoparticles

    SciTech Connect

    Chandross, Michael

    2014-10-06

    Our work presents molecular dynamics and Monte Carlo simulations aimed at developing an understanding of the formation of core–shell Cu-Ag nanoparticles. The effects of surface and interfacial energies were considered and used to form a phenomenological model that calculates the energy gained upon the formation of a core–shell structure from two previously distinct, non-interacting nanoparticles. In most cases, the core–shell structure was found to be energetically favored. Specifically, the difference in energy as a function of the radii of the individual Cu and Ag particles was examined, with the assumption that a core–shell structure forms. In general, it was found that the energetic gain from forming such a structure increased with increasing size of the initial Ag particle. This result was interpreted as a result of the reduction in surface energy. Moreover, for two separate particles, both Cu and Ag contribute to the surface energy; however, for a core–shell structure, the only contribution to the surface energy is from the Ag shell and the Cu contribution is changed to a Cu–Ag interfacial energy, which is always smaller.

  2. Energetics of the formation of Cu-Ag core–shell nanoparticles

    DOE PAGESBeta

    Chandross, Michael

    2014-10-06

    Our work presents molecular dynamics and Monte Carlo simulations aimed at developing an understanding of the formation of core–shell Cu-Ag nanoparticles. The effects of surface and interfacial energies were considered and used to form a phenomenological model that calculates the energy gained upon the formation of a core–shell structure from two previously distinct, non-interacting nanoparticles. In most cases, the core–shell structure was found to be energetically favored. Specifically, the difference in energy as a function of the radii of the individual Cu and Ag particles was examined, with the assumption that a core–shell structure forms. In general, it was foundmore » that the energetic gain from forming such a structure increased with increasing size of the initial Ag particle. This result was interpreted as a result of the reduction in surface energy. Moreover, for two separate particles, both Cu and Ag contribute to the surface energy; however, for a core–shell structure, the only contribution to the surface energy is from the Ag shell and the Cu contribution is changed to a Cu–Ag interfacial energy, which is always smaller.« less

  3. Noble metals (Ag, Au) nanoparticles addition effects on superconducting properties of CuTl-1223 phase

    NASA Astrophysics Data System (ADS)

    Jabbar, Abdul; Mumtaz, Muhammad; Nadeem, Kashif

    2015-03-01

    Low anisotropic (Cu0.5Tl0.5) Ba2Ca2Cu3O10 - δ (CuTl-1223) high temperature superconducting phase was synthesized by solid-state reaction, silver (Ag) nanoparticles were prepared by sol-gel method and gold (Au) nanoparticles were extracted from colloidal solution. We added Ag and Au nanoparticles in CuTl-1223 matrix separately with same concentration during the final sintering process to get (M)x/CuTl-1223; M = Ag nanoparticles or Au nanoparticles (x = 0 and 1.0 wt.%) nano-superconductor composites. We investigated and compared the effects of these noble metals nanoparticles addition on structural, morphological and superconducting transport properties of CuTl-1223 phase. The crystal structure of the host CuTl-1223 superconducting phase was not affected significantly after the addition of these nanoparticles. The enhancement of superconducting properties was observed after the addition of both Ag and Au nanoparticles, which is most probably due to improved inter-grains weak-links and reduction of defects such as oxygen deficiencies, etc. The reduction of normal state room temperature resistivity is the finger prints of the reduction of barriers and facilitation to the carriers transport across the inter-crystallite sites due to improved inter-grains weak-links. The greater improvement of superconducting properties in Ag nanoparticles added samples is attributed to the higher conductivity of silver as compared to gold, which also suits for practical applications due to lower cost and easy synthesis of Ag nanoparticles as compared to Au nanoparticles.

  4. Investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al alloy with Ag and Mn additions

    SciTech Connect

    Silva, R.A.G.; Paganotti, A.; Gama, S.; Adorno, A.T.; Carvalho, T.M.; Santos, C.M.A.

    2013-01-15

    The investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al, Cu-11%Al-3%Ag, Cu-11%Al-10%Mn and Cu-11%Al-10%Mn-3%Ag alloys was made using microhardness measurements, differential scanning calorimetry, X-ray diffractometry, scanning electron microscopy, energy dispersion X-ray spectroscopy and magnetic moment change with applied field measurement. The results indicated that the Mn addition changes the phase stability range, the microhardness values and makes undetectable the eutectoid reaction in annealed Cu-11%Al and Cu-11%Al-3%Ag alloys while the presence of Ag does not modify the phase transformation sequence neither microhardness values of the annealed Cu-11%Al and Cu-11%Al-10%Mn alloys, but it increases the magnetic moment of this latter at about 2.7 times and decreases the rates of eutectoid and peritectoid reactions of the former. - Highlights: Black-Right-Pointing-Pointer The microstructure of Cu-Al alloy is modified in the Ag presence. Black-Right-Pointing-Pointer ({alpha} + {gamma}) phase is stabilized down to room temperature when Ag is added to Cu-Al alloy. Black-Right-Pointing-Pointer Ag-rich phase modifies the magnetic characteristics of Cu-Al-Mn alloy.

  5. Photoluminescence properties of ZnS nanoparticles co-doped with Pb 2+ and Cu 2+

    NASA Astrophysics Data System (ADS)

    Yang, Ping; Lü, Mengkai; Xü, Dong; Yuan, Duolong; Zhou, Guangjun

    2001-03-01

    Nanometer-scale ZnS, ZnS:Cu, ZnS:Pb, and ZnS co-doped with Cu 2+ and Pb 2+ have been synthesized using a chemical precipitation method. X-ray diffraction analysis shows that the diameter of the particles is 2-4 nm. These nanocrystals can be doped with copper and lead during the synthesis without altering the X-ray diffraction pattern. However, doping has shifted the luminescence to 530 nm (Cu 2+-doped) and 500-550 nm (co-doped with Cu 2+ and Pb 2+). In the case of ZnS:Pb nanocrystals, a relatively broad emission band (color range from blue to yellow) has been observed and its excitation wavelength shows a red shift. The photoluminescence intensity increases as the ZnS nanoparticles co-doped with Pb 2+ and Cu 2+. The results strongly suggest that doped ZnS nanocrystals, especially two kinds of metals activated ZnS nanocrystals, form a new class of luminescent materials.

  6. (Tl, Pb, Cu)Sr 2(Tl, Pb, Cu) 2Cu 2O 8- δ: a nonsuperconducting Tl-1222 * cuprate with both heavy atom single and oxygen depleted double layer motifs

    NASA Astrophysics Data System (ADS)

    Otto, H. H.; Ringshandl, S.; Baltrusch, R.

    1998-05-01

    An account is given of the synthesis and structural investigation of a newly discovered tetragonal (Tl, Pb, Cu)Sr 2(Tl, Pb, Cu) 2Cu 2O 8- δ compound (Tl-1222 * phase) with both (Tl, Pb, Cu)O single and oxygen depleted (Tl, Pb, Cu) 2O x double layer motifs, space group I4/mmm, lattice parameters a=3.8405(2), c=29.2536(5) Å, and Dx=7.46 g cm -3. Micaceous and highly reflecting black single crystals of 1 mm×1 mm×3-5 μm size were obtained from a Tl 2O 3- and CuO-rich partial melt. The as-grown compound is nonsuperconducting. The very thin crystals are extremely liable to bend out of shape. Deterioration could not be observed within the period of a year under ambient conditions. The complex crystal structure has been solved using single crystals. We take note of the similarity of the unit cell dimensions to superconducting (Tl, Cu) 2Ba 2(Ca, Tl)Cu 2O 8 (Tl-2212 phase) with TlO double rocksalt layers, and compare crystal-chemical details of similar compounds. Apart from the possibility of obtaining superconducting properties by suitable doping, the mechanical properties of the new material are very attractive from the point of view of its use as highly scattering composite layers of an X-ray monochromator.

  7. Constraints on Variable Ag:Au:Cu Ore-Metal Ratios in Felsic Arc-Magmas

    NASA Astrophysics Data System (ADS)

    Piccoli, P.; Englander, L.; Candela, P.

    2004-12-01

    Silver:gold:copper ratios are variable in porphyry-type ore systems. In an attempt to better understand why, we have employed experimental techniques to determine how silver and copper, and gold from previous experiments, are sequestered in felsic magmas. To this end, we are performing sealed silica tube experiments on the equilibria among pyrrhotite-magnetite-silver alloy at 800C and at vapor pressure. Run times for the preliminary experiments were 144 hours; runs had magnetite/pyrrhotite ratio of 4. The source of silver in the runs was AgCl. Analysis of reconnaissance experiments demonstrates the stability of magnetite, pyrrhotite and a silver sulfide solid solution under the conditions of the experiments. Equilibrium concentrations of ore metals in the run products are ~3000 ppm Ag and 3500 ppm Cu in the pyrrhotite. However, the concentrations in magnetite are significantly different: 100 ppm Ag and ~20 ppm Cu. Like copper and gold (Jugo et al., 1999; Lithos), silver is concentrated in pyrrhotite relative to magnetite. The equilibrium Ag-sulfide composition in the run products is Ag53Fe8Cu3S36, with a mole fraction of Ag2S of 0.74. The log fS2 is approximated as ~ -4. The mole fraction of Ag in an ideal metal solid solution in equilibrium with an ideal model Ag2S solid solution, and a log fS2 of -4, is ~0.4. By analogy with Au, the substitution of Ag into pyrrhotite may occur as an AgFeS2 component. The substitutional mechanism for Ag in magnetite is not clear: silver may substitute as AgFe(3+)(Fe(2+))-2, but may also be present in defects in the magnetite structure. The partition coefficient (D(po/mt)) for approximately 30 for Ag. The partition coefficient for Au is higher (~120) based on the data of Simon et al. (2003; Am. Min,) and Jugo et al. (1999; Lithos). These data can be combined with data on the solubility of Ag in silicate melts to calculate mineral-melt partition coefficients. These data suggest that the role of pyrrhotite crystallization in felsic

  8. Mechanical properties of Sm-Ba-Cu-O/Ag bulk superconductors

    NASA Astrophysics Data System (ADS)

    Sakai, N.; Mase, A.; Ikuta, H.; Seo, S.-J.; Mizutani, U.; Murakami, M.

    2000-06-01

    We studied the mechanical properties of melt-processed, single-grain, Ag-doped, Sm-Ba-Cu-O bulks with different densities. The tensile strength of the dense sample was 48.0 MPa and about 1.3 times larger than that of the porous sample with Ag and twice as large as that of the sample without Ag doping. The bending strength of the dense sample was estimated to be 137 MPa based on the Weibull distribution function and the effective volume of the samples. It was found that a reduction in the pore density and Ag addition were effective in increasing the mechanical strength of the Sm-Ba-Cu-O bulk.

  9. Preparation of Ag/Cu Janus nanowires: Electrodeposition in track-etched polymer templates

    NASA Astrophysics Data System (ADS)

    Zhu, X. R.; Wang, C. M.; Fu, Q. B.; Jiao, Z.; Wang, W. D.; Qin, G. Y.; Xue, J. M.

    2015-08-01

    Bimetal (Janus) nanowire has been widely used as a promising nanoscale motor. In this paper we present a highly controllable method to fabricate Ag/Cu Janus nanowires using track-etched polymer templates. Ag/Cu Janus nanowires with uniform size and stabilized structure have been successfully fabricated by electrodepositing Ag nanowires, and subsequently Cu nanowires in track-etched polymer templates. The pore size of nanopores prepared by this template is uniform and continuously controlled, so aperture of achieved nanowires are uniform and can be regulated. This polymer template can dissolve inorganic solvents that do not react with the nanowires, making it is easy to release the nanowires into solution. The nanopore shape in the track-etched templates is adjustable (e.g. conical), nanowires with more special shapes could be fabricated. Thus, these features make this simple and inexpensive method very suitable for the preparation of Janus nanowire.

  10. Synthesis and spectroscopic investigations of Cu- and Pb-doped colloidal ZnS nanocrystals.

    PubMed

    Ehlert, Oliver; Osvet, Andres; Batentschuk, Miroslaw; Winnacker, Albrecht; Nann, Thomas

    2006-11-23

    A novel organometallic synthesis method for the preparation of colloidal ZnS nanoparticles is presented. This method enables the synthesis of undoped ZnS nanocrystals as well as doping with Cu, Pb, or both. The particles can be covered with an undoped layer of ZnS, forming core/shell-type particles with the ZnS:Pb, ZnS:Cu, or ZnS:Cu,Pb cores. The particles were characterized via TEM, XRD, dynamic light scattering, and optical spectroscopy. We investigated the extrinsic surface defects and their coverage with an additional ZnS layer in detail by temperature-dependent luminescence and luminescence lifetime spectroscopy. PMID:17107162

  11. Stress Relaxation Mechanisms of Sn and SnPb Coatings Electrodeposited on Cu: Avoidance of Whiskering

    NASA Astrophysics Data System (ADS)

    Sobiech, M.; Teufel, J.; Welzel, U.; Mittemeijer, E. J.; Hügel, W.

    2011-11-01

    The interrelations of microstructural evolution, phase formation, residual stress development, and whiskering behavior were investigated for the systems of Sn coating on Cu and SnPb coating on Cu during aging at room temperature. It was shown that the whisker-preventing effect of Pb addition to pure Sn can be attributed to a Pb-induced change of the stress relaxation mechanism in the coating: Pure Sn coatings, with a columnar grain morphology, relax mechanical stress via localized, unidirectional grain growth from the surface of the coating (i.e., whisker formation occurs), whereas SnPb coatings, with an equiaxed grain morphology, relax mechanical stress via uniform grain coarsening without whisker formation. It can thus be suggested that tuning of the Sn grain morphology (i.e., establishing an equiaxed grain morphology) is a straightforward method of microstructural control to suppress whisker formation at room temperature. Experimental results obtained in this project validate this conclusion.

  12. Structural and magnetic phase transitions in CeCu6 -xTx (T =Ag ,Pd )

    NASA Astrophysics Data System (ADS)

    Poudel, L.; de la Cruz, C.; Payzant, E. A.; May, A. F.; Koehler, M.; Garlea, V. O.; Taylor, A. E.; Parker, D. S.; Cao, H. B.; McGuire, M. A.; Tian, W.; Matsuda, M.; Jeen, H.; Lee, H. N.; Hong, T.; Calder, S.; Zhou, H. D.; Lumsden, M. D.; Keppens, V.; Mandrus, D.; Christianson, A. D.

    2015-12-01

    The structural and the magnetic properties of CeCu6 -xAgx (0 ≤x ≤0.85 ) and CeCu6 -xPdx (0 ≤x ≤0.4 ) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6 -xAgx and CeCu6 -xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (P n m a ) to a monoclinic (P 21/c ) phase at 240 K. In CeCu6 -xAgx , the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈0.1 . The structural transition in CeCu6 -xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6 -xAgx and CeCu6 -xPdx , exhibit a magnetic quantum critical point (QCP), at x ≈0.2 and x ≈0.05 , respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ10 δ2), where δ1˜0.62 ,δ2˜0.25 ,x =0.125 for CeCu6 -xPdx and δ1˜0.64 ,δ2˜0.3 ,x =0.3 for CeCu6 -xAgx . The magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.

  13. Comparison of corrosion and oxygen evolution behaviors between cast and rolled Pb-Ag-Nd anodes

    NASA Astrophysics Data System (ADS)

    Zhong, Xiao-cong; Yu, Xiao-ying; Liu, Zheng-wei; Jiang, Liang-xing; Li, Jie; Liu, Ye-xiang

    2015-10-01

    The corrosion and oxygen evolution behaviors of cast and rolled Pb-Ag-Nd anodes were investigated by metalloscopy, environmental scanning electron microscopy, X-ray diffraction analysis, and various electrochemical measurements. The rolled anode exhibits fewer interdendritic boundaries and a dispersed distribution of Pb-Ag eutectic mixtures and Nd-rich phases in its cross-section. This feature inhibits rapid interdendritic corrosion into the metallic substrate along the interdendritic boundary network. In addition, the anodic layer formed on the rolled anode is more stable toward the electrolyte than that formed on the cast anode, reducing the corrosion of the metallic substrate during current interruption. Hence, the rolled anode has a higher corrosion resistance than the cast anode. However, the rolled anode exhibits a slightly higher anodic potential than the cast anode after 72 h of galvanostatic polarization, consistent with the larger charge transfer resistance. This larger charge transfer resistance may result from the oxygen-evolution reactive sites being blocked by the adsorption of more intermediates and oxygen species at the anodic layer/electrolyte interfaces of the rolled anode than at the interfaces of cast anode.

  14. Chemical behavior of Cu, Zn, Cd, and Pb in a eutrophic reservoir: speciation and complexation capacity.

    PubMed

    Tonietto, Alessandra Emanuele; Lombardi, Ana Teresa; Choueri, Rodrigo Brasil; Vieira, Armando Augusto Henriques

    2015-10-01

    This research aimed at evaluating cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) speciation in water samples as well as determining water quality parameters (alkalinity, chlorophyll a, chloride, conductivity, dissolved organic carbon, dissolved oxygen, inorganic carbon, nitrate, pH, total suspended solids, and water temperature) in a eutrophic reservoir. This was performed through calculation of free metal ions using the chemical equilibrium software MINEQL+ 4.61, determination of labile, dissolved, and total metal concentrations via differential pulse anodic stripping voltammetry, and determination of complexed metal by the difference between the total concentration of dissolved and labile metal. Additionally, ligand complexation capacities (CC), such as the strength of the association of metals-ligands (logK'ML) and ligand concentrations (C L) were calculated via Ruzic's linearization method. Water samples were taken in winter and summer, and the results showed that for total and dissolved metals, Zn > Cu > Pb > Cd concentration. In general, higher concentrations of Cu and Zn remained complexed with the dissolved fraction, while Pb was mostly complexed with particulate materials. Chemical equilibrium modeling (MINEQL+) showed that Zn(2+) and Cd(2+) dominated the labile species, while Cu and Pb were complexed with carbonates. Zinc was a unique metal for which a direct relation between dissolved species with labile and complexed forms was obtained. The CC for ligands indicated a higher C L for Cu, followed by Pb, Zn, and Cd in decreasing amounts. Nevertheless, the strength of the association of all metals and their respective ligands was similar. Factor analysis with principal component analysis as the extraction procedure confirmed seasonal effects on water quality parameters and metal speciation. Total, dissolved, and complexed Cu and total, dissolved, complexed, and labile Pb species were all higher in winter, whereas in summer, Zn was mostly present in the

  15. Effect of Sintering Temperature on Thermoelectric Properties of PbTe/Ag Composites Fabricated by Chemical Plating and Spark Plasma Sintering

    NASA Astrophysics Data System (ADS)

    Sie, F. R.; Hwang, C. S.; Tang, Y. H.; Kuo, C. H.; Chou, Y. W.; Yeh, C. H.; Ho, H. Y.; Lin, Y. L.; Lan, C. H.

    2015-06-01

    PbTe/Ag composite powders were synthesized by a chemical plating method and then compacted by spark plasma sintering (SPS) at 573 K to 673 K and 50 MPa. The effects of the sintering temperature on the thermoelectric properties of PbTe and the PbTe/Ag composites were investigated. The thermoelectric properties of PbTe and PbTe/Ag bulk samples were measured in the temperature range from 300 K to 700 K. PbTe/Ag bulk samples changed electrical transport behavior from p-type to n-type at room temperature. The SPS temperature not only changed the lattice parameter but also affected the conduction behavior of PbTe/Ag composites. The variation in the carrier concentration was determined by the role of the Ag dopant for different SPS temperatures. Moreover, the conduction of the PbTe/Ag samples changed from metallic to semiconducting in the measured temperature range from 300 K to 700 K as the sintering temperature increased. For the PbTe/Ag bulk materials subjected to SPS at 573 K and 673 K, the values of the power factor were 0.38 mW/m K2 and 1.31 mW/m K2 at 700 K, respectively.

  16. Co-deposited thin films of YBa 2Cu 3O 7-δ-Ag

    NASA Astrophysics Data System (ADS)

    Moshfegh, A. Z.; Wang, Y. Q.; Sun, Y. Y.; Mesarwi, A.; Hor, P. H.; Ignatiev, A.

    1993-12-01

    The fabrication of high-temperature superconducting YBa 2Cu 3O 7-δ-Ag thin films has been investigated using a high-pressure Ag coevaporation-DC sputtering technique. Various analytical techniques including X-ray diffraction (XRD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), electron probe microanalysis (EPMA), energy dispersive X-ray analysis (EDX), and Tc measurement have been utilized for characterization of the films. Highly reproducible c-oriented (00 l) films have been prepared in-situ at a relatively low growth temperature (≃670°C) by this technique. The transition temperatures Tc gradually decreased with added Ag from 90 K (0 at.% Ag) to 72 K (22.3 at.% Ag) for the films deposited on MgO (100) substrates. X-ray diffraction indicated that the Ag is in the metallic state as a separate phase with respect to the YBCO and that the c-lattice parameter of the grown films remained unchanged with Ag addition. Surface morphology of the YBCO-Ag films exhibited a particulate-type structure with the grain size increasing as the Ag content increased. The temperature coefficient of the normalized resistance, d R( T)/ R(280 K)/d T, was also noticed to decrease for the Ag- containing samples as compared to Ag-free YBCO films. AES depth profiling identified Ag residing mainly at the YBCO/MgO interface. The effect of Ag addition to the films has been described by a particle growth model.

  17. Cluster reaction of [Ag8]-/[Cu8]- with chlorine: Evidence for the harpoon mechanism?

    NASA Astrophysics Data System (ADS)

    Luo, Zhixun; Berkdemir, Cüneyt; Smith, Jordan C.; Castleman, A. W.

    2013-09-01

    To examine the question whether the harpoon mechanism can account for the reactive behavior of microscopic charged systems, we have investigated the reactivity of coinage metal clusters in gas phase. Our studies reveal that the reactivity between [Cu8]-/[Ag8]- and chlorine gas is consistent with the harpoon mechanism. An increased reactive cross section is noted through our theoretical estimation based on two methods, ascribed to a long-range transfer of valence electrons from the [Cu8]-/[Ag8]- cluster to chlorine. Insights into this reactivity will be of interest to other researchers working on obtaining a better understanding of the reaction mechanisms of such superatomic species.

  18. Oxygen reduction on Ni, Ag, and Cu meniscus electrodes in molten carbonate

    SciTech Connect

    Ogura, Hiroyuki; Shirogami, Tamotsu

    1994-12-31

    The oxygen reduction pathways in molten carbonates have been investigated by analyzing the charge transfer resistances of the i-V curves on the meniscus electrodes of Ni, Cu, and Ag screens at 550 C. The electrochemical reduction pathways of oxygen at the meniscus electrode were found to be different depending on the electrode materials. For the Ni meniscus electrode system, the reactive material of charge transfer is the lithium doped nickel oxide, for the Ag system that is the silver oxide ion, and for the Cu system that is peroxide ion, respectively.

  19. Interface stress development in the Cu/Ag nanostructured multilayered film during the tensile deformation

    SciTech Connect

    Su, R.; Nie, Z. H.; Zhang, Q. H.; Li, X. J.; Li, L. E-mail: ydwang@mail.neu.edu.cn; Zhou, X. T.; Wang, Y. D. E-mail: ydwang@mail.neu.edu.cn; Wu, Y. D.; Hui, X. D.; Wang, M. G.

    2014-12-01

    Cu/Ag nanostructured multilayered films (NMFs) with different stacking sequences were investigated by synchrotron X-ray diffraction during the tensile deformations for interface stress study. The lattice strains were carefully traced and the stress partition, which usually occurs in the multiphase bulk metallic materials during plastic deformations, was first quantitatively analyzed in the NMFs here. The interface stress of the Cu/Ag NMFs was carefully analyzed during the tensile deformation and the results revealed that the interface stress was along the loading direction and exhibited three-stage evolution. This tensile interface stress has a detrimental effect on the deformation, leading to the early fracture of the NMFs.

  20. Synthesis of highly phase pure (Bi, Pb)-Sr-Ca-Cu-O superconductor

    DOEpatents

    Dorris, Stephen E.; Poeppel, Roger B.; Prorok, Barton C.; Lanagan, Michael T.; Maroni, Victor A.

    1994-01-01

    An article and method of manufacture of (Bi,Pb)-Sr-Ca-Cu-O superconductor. The superconductor is manufactured by preparing a first powdered mixture of bismuth oxide, lead oxide, strontium carbonate, calcium carbonate and copper oxide. A second powdered mixture is then prepared of strontium carbonate, calcium carbonate and copper oxide. The mixtures are calcined separately with the two mixtures then combined. The resulting combined mixture is then subjected to a powder in tube deformation and thermal processing to produce a substantially phase pure (Bi,Pb)-Sr-Ca-Cu-O superconductor.

  1. Synthesis of highly phase pure (Bi, Pb)-Sr-Ca-Cu-O superconductor

    DOEpatents

    Dorris, S.E.; Poeppel, R.B.; Prorok, B.C.; Lanagan, M.T.; Maroni, V.A.

    1994-10-11

    An article and method of manufacture of (Bi,Pb)-Sr-Ca-Cu-O superconductor are disclosed. The superconductor is manufactured by preparing a first powdered mixture of bismuth oxide, lead oxide, strontium carbonate, calcium carbonate and copper oxide. A second powdered mixture is then prepared of strontium carbonate, calcium carbonate and copper oxide. The mixtures are calcined separately with the two mixtures then combined. The resulting combined mixture is then subjected to a powder in tube deformation and thermal processing to produce a substantially phase pure (Bi,Pb)-Sr-Ca-Cu-O superconductor. 5 figs.

  2. Accumulation and transport of Cd, Cu, and Pb in an estuarine salt marsh surface microlayer

    SciTech Connect

    Lion, L.W.; Leckie, J.O.

    1982-01-01

    Dissolved and particulate Cd, Cu, and Pb were measured in bulk solution and surface microlayer samples from an intertidal salt marsh in south San Francisco Bay. The phase distribution (dissolved vs. particulate) of metals was consistent with their calculated speciation in computer-simulated sea-salt matrices. Trace metal enrichment at the microlayer corresponded with physical events at the sample site. Advective exchange of Cd, Cu, and Pb between the estuary and marsh systems was dominated by transport of bulk suspended particulate metals, with an apparent net export from the marsh to the bay.

  3. Sources of Cu, Zn, Cd and Pb in rainwater at a subtropical islet offshore northern Taiwan

    NASA Astrophysics Data System (ADS)

    Cheng, Miao-Ching; You, Chen-Feng; Lin, Fei-Jan; Huang, Kuo-Fang; Chung, Chuan-Hsiung

    2011-02-01

    Pollutants derived from long-range transport and local emission impact significantly of heavy metal compositions in rainwater and aerosols. To identify their sources and relative contributions in rainwater, 47 monthly rainwater samples from January 1998 to December 2001, collected at Peng Chia Yu (PCY), a non-residential islet offshore Taiwan, were analyzed for heavy metals (i.e. Cu, Zn, Cd, and Pb) and Pb isotopic compositions. The dissolved metals concentrations of Al, Mn, Fe, Cu, Zn, Rb, Ba, and Pb in PCY rains are high in spring and winter, but low in summer. This can be understood in terms of pollutant source changes due to wind direction shifted seasonally. The average EF crust and EF seawater values calculated for Cu, Zn, Cd and Pb are far greater than 1500, suggesting their strong anthropogenic sources, also supported by the PCA results. The pollutants derived from long-range transport are the predominated heavy metals sources during the winter monsoon season, whereas local traffic emissions play the most important role during the summer monsoon period. Unique Pb isotopic fingerprints, similar to those of iron ore sinter dusts and oil combustion dusts from Shanghai and the traffic emissions from Taiwan were identified in PCY rainwater. A mixing model based on three typical end-member Pb isotopic compositions derived from Taiwan and China was applied to evaluate the pollutant sources variations.

  4. Bioaccessibility of As, Cd, Cu, Ni, Pb, and Sb in toys and low-cost jewelry.

    PubMed

    Guney, Mert; Zagury, Gerald J

    2014-01-21

    Children can be exposed to toxic elements in toys and jewelry following ingestion. As, Cd, Cu, Ni, Pb, and Sb bioavailability was assessed (n = 24) via the in vitro gastrointestinal protocol (IVG), the physiologically based extraction test (PBET), and the European Toy Safety Standard protocol (EN 71-3), and health risks were characterized. Cd, Cu, Ni, and Pb were mobilized from 19 metallic toys and jewelry (MJ) and one crayon set. Bioaccessible Cd, Ni, or Pb exceeded EU migratable concentration limits in four to six MJ, depending on the protocol. Using two-phase (gastric + intestinal) IVG or PBET might be preferable over EN 71-3 since they better represent gastrointestinal physiology. Bioaccessible and total metal concentrations were different and not always correlated, indicating that bioaccessibility measurement may provide more accurate risk characterization. More information on impacts of multiple factors affecting metals mobilization from toys and jewelry is needed before recommending specific tests. Hazard index (HI) for Cd, Ni, or Pb were >1 for all six MJ exceeding the EU limits. For infants (6-12 mo old), 10 MJ had HI > 1 for Cd, Cu, Ni, or Pb (up to 75 for Cd and 43 for Pb). Research on prolonged exposure to MJ and comprehensive risk characterization for toys and jewelry exposure is recommended. PMID:24345102

  5. Global optimization and oxygen dissociation on polyicosahedral Ag32Cu6 core-shell cluster for alkaline fuel cells

    NASA Astrophysics Data System (ADS)

    Zhang, N.; Chen, F. Y.; Wu, X. Q.

    2015-07-01

    The structure of 38 atoms Ag-Cu cluster is studied by using a combination of a genetic algorithm global optimization technique and density functional theory (DFT) calculations. It is demonstrated that the truncated octahedral (TO) Ag32Cu6 core-shell cluster is less stable than the polyicosahedral (pIh) Ag32Cu6 core-shell cluster from the atomistic models and the DFT calculation shows an agreeable result, so the newfound pIh Ag32Cu6 core-shell cluster is further investigated for potential application for O2 dissociation in oxygen reduction reaction (ORR). The activation energy barrier for the O2 dissociation on pIh Ag32Cu6 core-shell cluster is 0.715 eV, where the d-band center is -3.395 eV and the density of states at the Fermi energy level is maximal for the favorable absorption site, indicating that the catalytic activity is attributed to a maximal charge transfer between an oxygen molecule and the pIh Ag32Cu6 core-shell cluster. This work revises the earlier idea that Ag32Cu6 core-shell nanoparticles are not suitable as ORR catalysts and confirms that Ag-Cu nanoalloy is a potential candidate to substitute noble Pt-based catalyst in alkaline fuel cells.

  6. Global optimization and oxygen dissociation on polyicosahedral Ag32Cu6 core-shell cluster for alkaline fuel cells

    PubMed Central

    Zhang, N.; Chen, F. Y.; Wu, X.Q.

    2015-01-01

    The structure of 38 atoms Ag-Cu cluster is studied by using a combination of a genetic algorithm global optimization technique and density functional theory (DFT) calculations. It is demonstrated that the truncated octahedral (TO) Ag32Cu6 core-shell cluster is less stable than the polyicosahedral (pIh) Ag32Cu6 core-shell cluster from the atomistic models and the DFT calculation shows an agreeable result, so the newfound pIh Ag32Cu6 core-shell cluster is further investigated for potential application for O2 dissociation in oxygen reduction reaction (ORR). The activation energy barrier for the O2 dissociation on pIh Ag32Cu6 core-shell cluster is 0.715 eV, where the d-band center is −3.395 eV and the density of states at the Fermi energy level is maximal for the favorable absorption site, indicating that the catalytic activity is attributed to a maximal charge transfer between an oxygen molecule and the pIh Ag32Cu6 core-shell cluster. This work revises the earlier idea that Ag32Cu6 core-shell nanoparticles are not suitable as ORR catalysts and confirms that Ag-Cu nanoalloy is a potential candidate to substitute noble Pt-based catalyst in alkaline fuel cells. PMID:26148904

  7. Effect of Ag addition on the thermal characteristics and structural evolution of Ag-Cu-Ni ternary alloy nanoclusters: Atomistic simulation study

    NASA Astrophysics Data System (ADS)

    Subbaraman, Ram; Sankaranarayanan, Subramanian K. R. S.

    2011-08-01

    Atomic-scale compositional variation in Ag contents across Ag-Cu-Ni alloy upon being subjected to repeated annealing cycles is shown to result in significant differences in the structure and the thermal stability of ternary alloy nanoclusters. Molecular dynamics (MD) simulations employing quantum Sutton-Chen potentials were used to investigate the effect of Ag addition on the thermal characteristics of Ag-Cu-Ni ternary alloy nanoclusters of 4-nm diameter. The initial configurations were generated using Monte Carlo simulations and comprise surface-segregated structures with the lowest surface energy component, Ag, occupying low coordination sites such as corners, edges, and faces. A compositional oscillation between the Cu and Ni atoms was observed for layers beneath the surface which transitions into a bulk alloy composition at the core. We find that the Cu-Ni binary alloys on being subjected to annealing schedules demonstrated an increase in thermal stability, as indicated by the increase in melting points. The annealed configurations of the Ag-Cu-Ni ternary alloy, on the other hand, showed a nonmonotonic behavior. For Ag compositions less than 20%, we observe an initial increase in melting point followed by a decrease in the third cycle. For higher Ag compositions (>20%), we observe a decrease in melting point with annealing; the rate of decrease is strongly correlated to the Ag composition in the alloy. Cu-Ni nanoclusters having 50% Cu showed a transition from an initial icosahedral to a cuboctahedron-like structure whereas Ag-rich Ag-Cu-Ni ternary alloys showed a transition from icosahedral to an amorphous structure. Compositional analysis based on radial distribution functions and density profiles indicate that these transitions were dependent on the distribution of the alloying elements in the nanocluster. Calculated root-mean-square displacements and diffusion coefficients indicate that the rate of mixing of Ag increases with Ag content in the Ag-Cu

  8. Relationship between the Porco, Bolivia, Ag-Zn-Pb-Sn deposit and the Porco Caldera

    USGS Publications Warehouse

    Cunningham, C.G.

    1994-01-01

    The Porco Ag-Zn-Pb-Sn deposit, a major Ag producer in the 16th century and currently the major Zn producer in Bolivia, consists of a swarm of fissure-filling veins in the newly recognized Porco caldera. The caldera measures 5 km by 3 km and formed in response to the eruption of the 12 Ma crystal-rich dacitic Porco Tuff. The mineralization is associated with, and is probably genetically related to, the 8.6 Ma Huayna Porco stock. The Porco deposit consists of steeply dipping irregular and curvilinear veins that cut the intracaldera Porco Tuff about 1 km east of the Huayna Porco stock. Most of the veins are aligned along the structural margin (ring fracture) of the caldera. The ore deposit is zoned around the Huayna Porco stock. The primary Ag minerals are most abundant in the upper parts of the viens. Fluid inclusions in sphalerite stalactites have homogenization temperatures of about 225??C and salinities of about 8 wt% NaCl equiv. The stalactites and the presence of sparse vapor-rich inclusions suggest deposition of sphalerite under boiling conditions. -from Authors

  9. Fluid inclusions and isotopic characteristics of the Jiawula Pb-Zn-Ag deposit, Inner Mongolia, China

    NASA Astrophysics Data System (ADS)

    Li, Tiegang; Wu, Guang; Liu, Jun; Hu, Yanqing; Zhang, Yunfu; Luo, Dafeng; Mao, Zhihao

    2015-05-01

    The large Jiawula Pb-Zn-Ag deposit is located in the Derbugan metallogenic belt of the northern Great Xing'an Range. The vein style orebodies of the deposit occur along NWW- to NNW-trending fault zones. The ore-forming process at the deposit can be divided into three stages: an early quartz-pyrite-pyrrhotite-chalcopyrite stage, a middle quartz-carbonate-pyrite-galena-sphalerite stage, and a late quartz-carbonate-pyrite stage. Sulfide Rb-Sr dating indicates that the Jiawula deposit formed at ca. 143-142 Ma. Four types of fluid inclusions have been distinguished in quartz veins including liquid-rich, gas-rich, H2O-CO2, and daughter mineral-bearing inclusions. The fluid inclusions of the early stage are mainly liquid-rich, gas-rich, and H2O-CO2 types, with a small number containing daughter minerals. Cumulatively, the types have homogenization temperatures, densities, and salinities of 304-438 °C, 0.35-1.37 g/cm3, and 0.8-44.6 wt.% NaCl eqv., respectively. Inclusions of the middle stage are mainly liquid-rich and gas-rich types, with a small amount of H2O-CO2 and daughter mineral-bearing types; their homogenization temperatures, densities, and salinities vary from 242 °C to 297 °C, 0.71 to 1.44 g/cm3, and 0.4 wt.% to 36.8 wt.% NaCl eqv., respectively. The late stage only comprises liquid-rich inclusions with homogenization temperatures, densities, and salinities of 181-238 °C, 0.81-0.90 g/cm3, and 0.2-1.9 wt.% NaCl eqv., respectively. The ore-forming fluids of the Jiawula deposit are generally characterized by moderate temperature and low salinity and density, and belong to an H2O-NaCl-CO2 ± CH4 system. The δ18Owater values calculated for ore-bearing quartz vary from -13.4‰ to -9.1‰, and the δDV-SMOW values from bulk extraction of fluid inclusion waters vary from -166‰ to -133‰, suggesting that the ore-forming fluids mainly consist of meteoric water with a small amount of magmatic water. The δ34SV-CDT values range from 1.2‰ to 8.4‰. The 206Pb/204Pb

  10. Sensitive and selective detection of Hg2+ and Cu2+ ions by fluorescent Ag nanoclusters synthesized via a hydrothermal method

    NASA Astrophysics Data System (ADS)

    Liu, Jing; Ren, Xiangling; Meng, Xianwei; Fang, Zheng; Tang, Fangqiong

    2013-09-01

    An easily prepared fluorescent Ag nanoclusters (Ag NCs) probe for the sensitive and selective detection of Hg2+ and Cu2+ ions was developed here. The Ag NCs were synthesized by using polymethacrylic acid sodium salt as a template via a convenient hydrothermal process. The as-prepared fluorescent Ag NCs were monodispersed, uniform and less than 2 nm in diameter, and can be quenched in the presence of mercury (Hg2+) or copper (Cu2+) ions. Excellent linear relationships existed between the quenching degree of the Ag NCs and the concentrations of Hg2+ or Cu2+ ions in the range of 10 nM to 20 μM or 10 nM to 30 μM, respectively. By using ethylenediaminetetraacetate (EDTA) as the masking agent of Cu2+, Hg2+ was exclusively detected in coexistence with Cu2+ with high sensitivity (LOD = 10 nM), which also provided a reusable detection method for Cu2+. Furthermore, the different quenching phenomena caused by the two metals ions such as changes in visible colour, shifts of UV absorbance peaks and changes in size of Ag NCs make it easy to distinguish between them. Therefore the easily synthesized fluorescent Ag NCs may have great potential as Hg2+ and Cu2+ ions sensors.An easily prepared fluorescent Ag nanoclusters (Ag NCs) probe for the sensitive and selective detection of Hg2+ and Cu2+ ions was developed here. The Ag NCs were synthesized by using polymethacrylic acid sodium salt as a template via a convenient hydrothermal process. The as-prepared fluorescent Ag NCs were monodispersed, uniform and less than 2 nm in diameter, and can be quenched in the presence of mercury (Hg2+) or copper (Cu2+) ions. Excellent linear relationships existed between the quenching degree of the Ag NCs and the concentrations of Hg2+ or Cu2+ ions in the range of 10 nM to 20 μM or 10 nM to 30 μM, respectively. By using ethylenediaminetetraacetate (EDTA) as the masking agent of Cu2+, Hg2+ was exclusively detected in coexistence with Cu2+ with high sensitivity (LOD = 10 nM), which also provided a

  11. Synthesis and characterization of Ag@Cu nano/microstructure ordered arrays as SERS-active substrates

    NASA Astrophysics Data System (ADS)

    Zhang, Pinhua; Cui, Guangliang; Xiao, Chuanhai; Zhang, Mingzhe; Chen, Li; Shi, Changmin

    2016-06-01

    We fabricated an Ag decorated Cu (Ag@Cu) nano/microstructure ordered array by facile template-free 2D electrodeposition combined with a galvanic reduction method for SERS applications. The Cu nano/microstructure ordered arrays were first synthesized by a 2D electrodeposition method, then Ag nanocubes were decorated on the arrays by galvanic reduction without any capping agent. The pollution-free surface and edge-to-face heterostructure of Ag nanocubes and Cu nano/microstructure arrays provide the powerful field-enhancements for SERS performance. The results verified that the Ag@Cu nano/microstructure ordered arrays have excellent activity for 4-Mercaptopyridine, and the sensitivity limit is as low as 10‑8 M. Therefore, this facile route provides a useful platform for the fabrication of a SERS substrate based on nano/microstructure ordered arrays.

  12. First principles investigation of the diffusion of interstitial Cu, Ag and Au in ZnTe

    NASA Astrophysics Data System (ADS)

    Chen, Li An; Zhu, Xing Feng; Chen, Ling Fu

    2015-07-01

    The diffusion is of great significance in many applications when the impurities are employed to tune the semiconductor's electrical or optical properties. It is necessary to understand how dopant defects diffuse in semiconductors. Using first-principles calculations, we consider interstitial diffusion mechanisms and calculate the migration barrier energies of interstitial Cu, Ag and Au atoms in II-VI compounds ZnTe. We find that the relative size of dopant and bulk atoms is an important factor which affects the diffusion behavior. The high symmetry Tc site, which is tetrahedrally coordinated by four cation atoms, is the global minimum energy location for Ag and Au interstitials. The size of Cu adatom is small, so Cu is more stable when it locates at the Ta site which is tetrahedrally coordinated by four anion atoms. But the global minimum energy location for Cu interstitials is M site which is of smaller space than Ta. Cu adatoms show an asymmetric curve of energy diffusion barrier with two energetically distinct extremum in the pathway. Ag diffuses along nearly straight line paths along [111] or equivalent directions. Diffusion for Cu or Au deviates from the straight line paths along <111> avoiding high symmetric sites.

  13. Modeling non-isothermal intermetallic layer growth in the 63Sn-37Pb/Cu system

    SciTech Connect

    Vianco, P.T.; Hopkins, P.L.; Erickson, K.L.; Frear, D.R.; Davidson, R.

    1996-12-31

    A model describing diffusion-controlled growth of multiple intermetallic layers and the displacement of the interfaces between layers was developed and implemented in a 1-D computer code based on method-of-lines. The code was applied to analysis of intermetallic layer growth in isothermal solder aging experiments performed with 100 Sn/Cu and 63Sn-37Pb/Cu solder-substrate systems. Analyses indicated that intermetallic layer growth was consistent with a bulk diffusion mechanism involving Cu and/or Sn. In this work, nonisothermal solder-aging experiments were done with the 63Sn- 37Pb/Cu system using two temperature histories (4 cycles/day between 223-443 K, and 72 cycles/day between 223-443 K). Isothermal experiments were also done at 443 K. Thickness of Cu{sub 3}Sn and Cu{sub 6}Sn{sub 5} intermetallic layers were determined vs time for each temperature history. An updated version of the model and code were used to predict the intermetallic layer growth. Arrhenius expressions for diffusion coefficients in both Cu3Sn and Cu6Sn5 layers were determined. Agreement between prediction and experiment was generally good. In some cases, predicted layer growth was less than experiment, but within error. This paper describes the nonisothermal experiments and a comparison of predicted and observed layer growth vs time.

  14. Sorption behavior of Cd, Cu, Pb, and Zn and their interactions in phytoremediated soil.

    PubMed

    Trakal, L; Komárek, M; Száková, J; Tlustos, P; Tejnecký, V; Drábek, O

    2012-09-01

    The aim of our study was to compare the sorption properties of a contaminated soil before and after two types of phytoremediation (natural phytoextraction vs. phytostabilization with dolomite limestone (DL) application). Soil from a pot experiment in controlled greenhouse conditions performed for two vegetation periods was used for the study. Lead, as the main contaminant in the studied soil, was easily desorbed by Cu, especially due to the increased affinity of Cu for soil organic matter; hence input of Cu to the studied soil can present another environmental risk in soils contaminated with other metals (such as Pb). In addition, the sorption behavior of chosen metals from single-element solutions differed from multielement solutions. The obtained results proved the different sorption behavior of metals in the single-element solution compared to the multi-element ones. Soil sorption behavior of Cd, Cu, and Zn decreased with the presence of the competitive metals; nevertheless, Pb sorption potential was not influenced by other competitive metals. Natural phytoextraction showed no significant effect on the sorption of Cd, Cu, Pb, and Zn onto the soil On the other hand, phytostabilization associated with DL application improved the soil sorption efficiency of all chosen metals, especially of Cu. PMID:22908646

  15. An experimental and thermodynamic equilibrium investigation of the Pb, Zn, Cr, Cu, Mn and Ni partitioning during sewage sludge incineration.

    PubMed

    Liu, Jingyong; Fu, Jiewen; Ning, Xun'an; Sun, Shuiyu; Wang, Yujie; Xie, Wuming; Huang, Shaosong; Zhong, Sheng

    2015-09-01

    The effects of different chlorides and operational conditions on the distribution and speciation of six heavy metals (Pb, Zn, Cr, Cu, Mn and Ni) during sludge incineration were investigated using a simulated laboratory tubular-furnace reactor. A thermodynamic equilibrium investigation using the FactSage software was performed to compare the experimental results. The results indicate that the volatility of the target metals was enhanced as the chlorine concentration increased. Inorganic-Cl influenced the volatilization of heavy metals in the order of Pb>Zn>Cr>Cu>Mn>Ni. However, the effects of organic-Cl on the volatility of Mn, Pb and Cu were greater than the effects on Zn, Cr and Ni. With increasing combustion temperature, the presence of organic-Cl (PVC) and inorganic-Cl (NaCl) improved the transfer of Pb and Zn from bottom ash to fly ash or fuse gas. However, the presence of chloride had no obvious influence on Mn, Cu and Ni. Increased retention time could increase the volatilization rate of heavy metals; however, this effect was insignificant. During the incineration process, Pb readily formed PbSiO4 and remained in the bottom ash. Different Pb compounds, primarily the volatile PbCl2, were found in the gas phase after the addition of NaCl; the dominant Pb compounds in the gas phase after the addition of PVC were PbCl2, Pb(ClO4)2 and PbCl2O4. PMID:26354691

  16. EFFECTS OF AQUEOUS AL, CD, CU, FE(II), NI, AND ZN ON PB IMMOBILIZATION BY HYDROXYAPATITE

    EPA Science Inventory

    The effects of aqueous Al, Cd, Cu, Fe(II), Ni, or Zn on Pb immobilization by hydroxyapatite (Ca10(PO4),(OH)2) were studied. ead was removed mainly via hydroxyapatite dissolution and hydroxypyromorphite (Pb10(PO4)6(OH)2) precipitation in the presence of these metals with a Pb remo...

  17. Paleomagnetic Age for the World-class Century Zn-Pb-Ag Deposit, Australia

    NASA Astrophysics Data System (ADS)

    Kawasaki, K.; Symons, D. T.; Dawborn, T.

    2009-05-01

    Paleomagnetic results are reported for the Century Zn-Pb-Ag SEDEX deposit in northwestern Queensland, Australia. The stratiform mineralization occurs in fine parallel lamellae in ˜1595 Ma siderite-rich siltstones and black shales of the upper Lawn Hill Formation in the Proterozoic McNamara Group. Galena from the deposit has given a Pb/Pb model age of ˜1575 Ma. Paleomagnetic analysis of 333 specimens from ore zones (15 sites), and hanging wall (4 sites) and footwall (5 sites) siltstones using mostly thermal and then alternating field step demagnetization, isolates a stable characteristic remanent magnetization (ChRM) for the ore sites only. Step demagnetization, rock magnetic tests and thermomagnetic analyses of ore, Zn and Pb concentrates and tailings show that the main remanence carriers are single- or pseudosingle-domain inclusions of titanomagnetite in sphalerite and gangue, and pyrrhotite in galena with modern goethite and/or hematite from the weathering of siderite. A paleomagnetic fold test using the ore sites is positive, showing that the ore ChRM predates D2 deformation in the ˜1595 to ˜1500 Ma Isan orogeny. The orogeny folded the main-stage mineralization, indicating that the ore retains a primary magnetization. The optimum 80% tilt-corrected unit mean ChRM direction for the ore gives a Mesoproterozoic paleopole at ˜1560 Ma on the northern Australian apparent polar wander path. Thus this result both constrains the timing of mineralization and provides an upper age limit for D2 deformation in the orogeny.

  18. 3D Epitaxy of Graphene nanostructures in the Matrix of Ag, Al and Cu

    NASA Astrophysics Data System (ADS)

    Salamanca-Riba, Lourdes; Isaacs, Romaine; Wuttig, Manfred; Lemieux, Melburne; Hu, Liangbing; Iftekhar, Jaim; Rashkeev, Sergey; Kukla, Maija; Rabin, Oded; Mansour, Azzam

    2015-03-01

    Graphene nanostructures in the form ribbons were embedded in the lattice of metals such as Ag, Cu, and Al in concentrations up to 36.4 at.%, 21.8 at% and 10.5 at.%, respectively. These materials are called covetics. Raman scattering from Ag and Al covetics indicate variations in the intensity of peaks at ~ 1,300 cm-1 and 1,600 cm-1 with position on the sample. These peaks are associated with the D (defects) and G (graphite E2g mode) peaks of graphitic carbon with sp2 bonding and reveal various degrees of imperfections in the graphene layers. First principles calculations of the dynamic matrix of Ag and Al covetics show bonding between C and the metal. EELS mapping of the C-K edge and high resolution lattice images show that the graphene-like regions form ribbons with epitaxial orientation with the metal lattice of Ag and Al. The temperature dependences of the resistivites of Ag and Cu covetics are similar to those of the pure metals with only slight increase in resistivity. Films of Cu covetic deposited by e-beam evaporation and PLD show higher transmittance and resistance to oxidation than pure metal films of the same thickness indicating that copper covetic films can be used for transparent electrodes. Funded by DARPA/ARL Grant No. W911NF-13-1-0058, and ONR Award No N000141410042.

  19. Growth Behavior of Intermetallic Compounds in Cu/Sn3.0Ag0.5Cu Solder Joints with Different Rates of Cooling

    NASA Astrophysics Data System (ADS)

    Yang, Linmei; Zhang, Z. F.

    2015-01-01

    The growth behavior of intermetallic compounds (IMC) in Cu/Sn3.0Ag0.5Cu solder joints, including the interfacial Cu6Sn5 layer and Ag3Sn, and Cu6Sn5 in the solder, were investigated when different cooling methods—quenched water, cooling in air, and cooling in a furnace after reflow—were used. For the solder joint quenched in water, no obvious Cu6Sn5 or Ag3Sn was detected in the solder, and the thickness of interfacial Cu6Sn5 layer was slightly thinner than that of the joint cooled in air. On the basis of results from scanning electron microscopy and energy-dispersive spectrometry, a mechanism is proposed for growth of IMC in Sn3.0Ag0.5Cu solder during solidification. The rate of cooling has a substantial effect on the morphology and size of Ag3Sn, which evolved into large plate-like shapes when the joint was cooled slowly in a furnace. However, the morphology of Ag3Sn was branch-like or particle-like when the joint was cooled in air. This is attributed to re-growth of Ag3Sn grains via substantial atomic diffusion during the high-temperature stage of furnace cooling.

  20. THE TWO-DIMENSIONAL VALENCE ELECTRONIC STRUCTURE OF A MONOLYAER OF Ag ON Cu(00l)

    SciTech Connect

    Tobin, J.G.; Robey, S.W.; Shirley, D.A.

    1985-05-01

    The metal overlayer system c(10x2)Ag/Cu(001) was studied at coverages near one monolayer with angle-resolved photoemission. The observed spectroscopic features indicate a two-dimensional d-band electronic structure that can be interpreted using a model with planar, hexagonal symmetry in which crystal field effects dominate over spin-orbit effects.

  1. ZnO-(Cu/Ag)TCNQ heterostructure network over flexible platform for enhanced cold cathode application

    NASA Astrophysics Data System (ADS)

    Pal, Shreyasi; Maiti, Soumen; Narayan Maiti, Uday; Chattopadhyay, Kalyan Kumar

    2016-07-01

    Multistage field emitters consisting of organic/inorganic hybrid nanostructures with branched geometry are designed via a two-step protocol: a simple wet chemical method followed by a vapor-solid-phase technique. (Cu/Ag)TCNQ (copper/silver-7,7,8,8-tetracyanoquinodimethane) nanowires (NWs) were grown hierarchically on zinc oxide (ZnO) nanorods (NRs) to form ZnO-(Cu/Ag)TCNQ heterostructure assemblies. By monitoring the metallic Cu and Ag coating thickness on ZnO NRs, precise control over the morphology and orientations of the secondary organic NWs is achieved. In-depth analysis of electron field emission (FE) behavior of the ZnO-(Cu/Ag)TCNQ-based hierarchy suggests highest emission performance with low turn-on as well as threshold fields of 1.15 and 3.75 V μm‑1 respectively from the morphology-optimized hierarchy. Beneficial orientation of the branched organic NWs ensures sequential electric field enhancement in the consecutive stem and branches whereas its low work function eases electron emission; these aspects combined together render an overall enhancement in the emission behavior of the hybrid system. As compared to individual building units, the heterostructures show improved field electron emission. Additionally, successful construction of this novel hybrid over a fabric platform displays great potential in opening up new pathways in the highly-anticipated field of flexible electronics.

  2. Potential energy curves for the ground and low-lying excited states of CuAg

    SciTech Connect

    Alizadeh, Davood; Shayesteh, Alireza E-mail: ashayesteh@ut.ac.ir; Jamshidi, Zahra E-mail: ashayesteh@ut.ac.ir

    2014-10-21

    The ground and low-lying excited states of heteronuclear diatomic CuAg are examined by multi-reference configuration interaction (MRCI) method. Relativistic effects were treated and probed in two steps. Scalar terms were considered using the spin-free DKH Hamiltonian as a priori and spin-orbit coupling was calculated perturbatively via the spin-orbit terms of the Breit-Pauli Hamiltonian based on MRCI wavefunctions. Potential energy curves of the spin-free states and their corresponding Ω components correlating with the separated atom limits {sup 2}S(Cu) + {sup 2}S(Ag) and {sup 2}D(Cu) + {sup 2}S(Ag) are obtained. The results are in fine agreement with the experimental measurements and tentative conclusions for the ion-pair B0{sup +} state are confirmed by our theoretical calculations. Illustrative results are presented to reveal the relative importance and magnitude of the scalar and spin-orbit effects on the spectroscopic properties of this molecule. Time dependent density functional theory calculations, using the LDA, BLYP, B3LYP, and SAOP functionals have been carried out for CuAg and the accuracy of TD-DFT has been compared with ab initio results.

  3. Single naphthalene and anthracene molecular junctions using Ag and Cu electrodes in ultra high vacuum

    NASA Astrophysics Data System (ADS)

    Fujii, Shintaro; Kaneko, Satoshi; Chenyang, Liu; Kiguchi, Manabu

    2015-11-01

    We present a charge transport study on single naphthalene and anthracene molecular junctions wired into Ag and Cu electrodes using mechanically controllable break junction technique at 100 K under ultra-high vacuum condition. In particular we focus on effect of metal-π interaction on the formation probability of the molecular junctions. We found that the single molecular junctions of the acene molecules (e.g. naphthalene and anthracene) exhibit highly conductive character below 0.2 G0 (G0 = 2e2/h). The acene molecular junctions displayed formation probability of ca. 20% for Ag system and >40% for Cu system. The high formation probability of the molecular junctions with respect to benzene/Au junctions can be qualitatively explained by size effect, in which larger molecules of the naphthalene and anthracene can effectively bridge the gap between metal electrodes compared with small molecule such as benzene. The acene/Cu junctions displayed higher formation probability than the acene/Ag junctions. This result demonstrated that not only the size effect but the degree of the metal-π interaction have to be taken into account to quantitatively evaluate the formation probability of the molecular junctions for Ag and Cu system.

  4. ZnO-(Cu/Ag)TCNQ heterostructure network over flexible platform for enhanced cold cathode application.

    PubMed

    Pal, Shreyasi; Maiti, Soumen; Maiti, Uday Narayan; Chattopadhyay, Kalyan Kumar

    2016-07-01

    Multistage field emitters consisting of organic/inorganic hybrid nanostructures with branched geometry are designed via a two-step protocol: a simple wet chemical method followed by a vapor-solid-phase technique. (Cu/Ag)TCNQ (copper/silver-7,7,8,8-tetracyanoquinodimethane) nanowires (NWs) were grown hierarchically on zinc oxide (ZnO) nanorods (NRs) to form ZnO-(Cu/Ag)TCNQ heterostructure assemblies. By monitoring the metallic Cu and Ag coating thickness on ZnO NRs, precise control over the morphology and orientations of the secondary organic NWs is achieved. In-depth analysis of electron field emission (FE) behavior of the ZnO-(Cu/Ag)TCNQ-based hierarchy suggests highest emission performance with low turn-on as well as threshold fields of 1.15 and 3.75 V μm(-1) respectively from the morphology-optimized hierarchy. Beneficial orientation of the branched organic NWs ensures sequential electric field enhancement in the consecutive stem and branches whereas its low work function eases electron emission; these aspects combined together render an overall enhancement in the emission behavior of the hybrid system. As compared to individual building units, the heterostructures show improved field electron emission. Additionally, successful construction of this novel hybrid over a fabric platform displays great potential in opening up new pathways in the highly-anticipated field of flexible electronics. PMID:27188388

  5. Effects of Li content on precipitation in Al-Cu-(Li)-Mg-Ag-Zr alloys

    SciTech Connect

    Huang, B.P.; Zheng, Z.Q.

    1998-01-06

    Although much attention has been paid to Al-Cu-Li-Mg-Ag-Zr alloys, there are sparse reports about the influence of Li on precipitation in these alloys. The aim of the present study is to determine the effects of Li on modifying precipitation in a baseline aluminum alloy 2195 and the accompanying variants with 0--1.6 wt.% Li.

  6. Behaviors of heavy metals (Cd, Cu, Ni, Pb and Zn) in soil amended with composts.

    PubMed

    Gusiatin, Zygmunt Mariusz; Kulikowska, Dorota

    2016-09-01

    This study investigated how amendment with sewage sludge compost of different maturation times (3, 6, 12 months) affected metal (Cd, Cu, Ni, Pb, Zn) bioavailability, fractionation and redistribution in highly contaminated sandy clay soil. Metal transformations during long-term soil stabilization (35 months) were determined. In the contaminated soil, Cd, Ni and Zn were predominately in the exchangeable and reducible fractions, Pb in the reducible fraction and Cu in the reducible, exchangeable and oxidizable fractions. All composts decreased the bioavailability of Cd, Ni and Zn for up to 24 months, which indicates that cyclic amendment with compost is necessary. The bioavailability of Pb and Cu was not affected by compost amendment. Based on the reduced partition index (IR), metal stability in amended soil after 35 months of stabilization was in the following order: Cu > Ni = Pb > Zn > Cd. All composts were more effective in decreasing Cd, Ni and Zn bioavailability than in redistributing the metals, and increasing Cu redistribution more than that of Pb. Thus, sewage sludge compost of as little as 3 months maturation can be used for cyclic amendment of multi-metal-contaminated soil. PMID:26853755

  7. Study on structure and properties of CuZn40Pb alloy

    NASA Astrophysics Data System (ADS)

    Achiţei, D. C.; Minciună, M. G.; Vizureanu, P.; Sandu, A. V.; Cimpoeşu, R.; Istrate, B.

    2016-06-01

    The paper shows aspects about the behavior of Cu-Zn-Pb alloys a subjected to the temperatures variation and corrosion resistance in saline medium (sea water). The chemical composition was determined by spectral analysis on optical spectrometer, type Foundry Masters. The experiments are completed by a microstructure analysis made on scanning electronic microscope.

  8. Fabrication of nanoporous silver by de-alloying Cu-Zr-Ag amorphous alloys

    NASA Astrophysics Data System (ADS)

    Wang, Hui; Xiao, Shang-gang; Zhang, Tao

    2016-07-01

    Nanoporous silver (NPS) with a ligament size ranging from 15 to 40 nm was fabricated by de-alloying (Cu50Zr50)100- x Ag x ( x = 10at%, 20at%, 30at%, and 40at%) amorphous ribbons in a mixed aqueous solution of hydrofluoric (HF) acid and nitric acid under free corrosion conditions. Nanoporous silver ligaments and pore sizes were able to be fine-tuned through tailoring the chemical composition, corrosion conditions, and de-alloying time. The ligament size increases with an increase in Ag content and de-alloying time, but decreases with an increase in HF concentration. This phenomenon may be attributed to the dissolution of Zr/Cu and the diffusion, aggregation, nucleation, and recrystallization of Ag, leading to an oriented attachment of adjacent nanocrystals as revealed by TEM analysis.

  9. Abundances of Ag and Cu in mantle peridotites and the implications for the behavior of chalcophile elements in the mantle

    NASA Astrophysics Data System (ADS)

    Wang, Zaicong; Becker, Harry

    2015-07-01

    Silver abundances in mantle peridotites and the behavior of Ag during high temperature mantle processes have received little attention and, as a consequence, the abundance of Ag in the bulk silicate Earth (BSE) has been poorly constrained. In order to better understand the processes that fractionate Ag and other chalcophile elements in the mantle, abundances of Ag and Cu in mantle peridotites from different geological settings (n = 68) have been obtained by isotope dilution ICP-MS methods. In peridotite tectonites and in a few suites of peridotite xenoliths which display evidence for variable extents of melt depletion and refertilization by silicate melts, Ag and Cu abundances show positive correlations with moderately incompatible elements such as S, Se, Te and Au. The mean Cu/Ag in fertile peridotites (3500 ± 1200, 1s, n = 38) is indistinguishable from the mean Cu/Ag of mid ocean ridge basalts (MORB, 3600 ± 400, 1s, n = 338) and MORB sulfide droplets. The constant mean Cu/Ag ratios indicate similar behavior of Ag and Cu during partial melting of the mantle, refertilization and magmatic fractionation, and thus should be representative of the Earth's upper mantle. The systematic fractionation of Cu, Ag, Au, S, Se and Te in peridotites and basalts is consistent with sulfide melt-silicate melt partitioning with apparent partition coefficients of platinum group elements (PGE) > Au ⩾ Te > CuAg > Se ⩾ S. Because of the effects of secondary processes, the abundances of chalcophile elements, notably S, Se, but also Cu and the PGE in many peridotite xenoliths are variable and lower than in peridotite massifs. Refertilization of peridotite may change abundances of chalcophile and lithophile elements in peridotite massifs, however, this seems to mostly occur in a systematic way. Correlations with lithophile and chalcophile elements and the overlapping mean Cu/Ag ratios of peridotites and ocean ridge basalts are used to constrain abundances of Ag and Cu in the BSE

  10. On the role of Pb in epitaxial growth of thin Co films on Cu(111)

    NASA Astrophysics Data System (ADS)

    Mróz, S.; Otop, H.; Jankowski, Z.

    1998-05-01

    Cobalt layers were deposited at room temperature in UHV on the Cu(111) face clean and precovered with Pb. The role of Pb in the epitaxial growth of Co film was investigated with the use of combined Auger electron spectroscopy and directional elastic peak electron spectroscopy (DEPES). It has been found that the crystalline structure of Co layers is, for coverages up to 5 ML, insensitive to the precovering with lead. DEPES profiles for Co layers indicate the continuation of the stacking sequence of the fcc substrate structure. However, the presence of lead improves this structure. Namely, the contrast of particular maxima in DEPES profiles is maintained constant up to 1 ML and 2.5 ML of cobalt deposited on the Cu substrate clean and precovered with 1 ML of Pb, respectively.

  11. Bioaccessibility of Ba, Cu, Pb, and Zn in urban garden and orchard soils.

    PubMed

    Cai, Meifang; McBride, Murray B; Li, Kaiming

    2016-01-01

    Exposure of young children to toxic metals in urban environments is largely due to soil and dust ingestion. Soil particle size distribution and concentrations of toxic metals in different particle sizes are important risk factors in addition to bioaccessibility of these metals in the particles. Analysis of particle size distribution and metals concentrations for 13 soils, 12 sampled from urban gardens and 1 from orchard found that fine particles (<105 μm) comprised from 22 to 66% by weight of the tested soils, with Ba, Cu, Pb and Zn generally at higher concentrations in the finer particles. However, metal bioaccessibility was generally lower in finer particles, a trend most pronounced for Ba and Pb. Gastric was higher than gastrointestinal bioaccessibility for all metals except Cu. The lower bioaccessibility of Pb in urban garden soils compared to orchard soil is attributable to the higher organic matter content of the garden soils. PMID:26477581

  12. Highly Efficient Antibacterial and Pb(II) Removal Effects of Ag-CoFe2O4-GO Nanocomposite.

    PubMed

    Ma, Shuanglong; Zhan, Sihui; Jia, Yanan; Zhou, Qixing

    2015-05-20

    Ag-CoFe2O4-graphene oxide (Ag-CoFe2O4-GO) nanocomposite was synthesized by doping silver and CoFe2O4 nanoparticles on the surface of GO, which was used to purify both bacteria and Pb(II) contaminated water. The Ag-CoFe2O4-GO nanomaterial was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), cyclic voltammetry (CV), and magnetic property tests. It can be found that Ag-CoFe2O4-GO nanocomposite exhibited excellent antibacterial activity against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus compared with CoFe2O4, Ag-CoFe2O4, and CoFe2O4-GO composite. This superior disinfecting effect was possibly attributed to the combination of GO nanosheets and Ag nanoparticles. Several antibacterial factors including temperature, time, and pH were also investigated. It was obvious that E. coli was more susceptible than S. aureus toward all the four types of nanomaterials. The structural difference of bacterial membranes should be responsible for the resistant discrepancy. We also found that Ag-CoFe2O4-GO inactivated both bacteria in an irreversibly stronger manner than Ag-CoFe2O4 and CoFe2O4-GO. The Pb(II) removal efficiency with all the nanomaterials showed significant dependence on the surface area and zeta potential of the materials. In this work, not only did we demonstrate the simultaneous superior removal efficiency of bacteria and Pb(II) by Ag-CoFe2O4-GO but also the antibacterial mechanism was discussed to have a better understanding of the interaction between Ag-CoFe2O4-GO and bacteria. In a word, taking into consideration the easy magnetic separation, bulk availability, and irreversibly high antibacterial activity of Ag-CoFe2O4-GO, it is the very promising candidate material for advanced antimicrobial or Pb(II) contaminated water treatment. PMID:25905556

  13. Crystalline and quasicrystalline allotropes of Pb formed on the fivefold surface of icosahedral Ag-In-Yb

    SciTech Connect

    Sharma, H. R. Smerdon, J. A.; Nugent, P. J.; Ribeiro, A.; McGrath, R.; McLeod, I.; Dhanak, V. R.; Shimoda, M.; Tsai, A. P.

    2014-05-07

    Crystalline and quasicrystalline allotropes of Pb are formed by evaporation on the fivefold surface of the icosahedral (i) Ag-In-Yb quasicrystal under ultra-high vacuum. Lead grows in three dimensional quasicrystalline order and subsequently forms fivefold-twinned islands with the fcc(111) surface orientation atop of the quasicrystalline Pb. The islands exhibit specific heights (magic heights), possibly due to the confinement of electrons in the islands. We also study the adsorption behavior of C{sub 60} on the two allotropes of Pb. Scanning tunneling microcopy reveals that a high corrugation of the quasicrystalline Pb limits the diffusion of the C{sub 60} molecules and thus produces a disordered film, similar to adsorption behavior of the same molecules on the clean substrate surface. However, the sticking coefficient of C{sub 60} molecules atop the Pb islands approaches zero, regardless of the overall C{sub 60} coverage.

  14. Elevated temperature fracture toughness of Al-Cu-Mg-Ag sheet: Characterization and modeling

    SciTech Connect

    Haynes, M.J.; Gangloff, R.P.

    1997-09-01

    The plane-strain initiation fracture toughness (K{sub JlCi}) and plane-stress crack growth resistance of two Al-Cu-Mg-Ag alloy sheets are characterized as a function of temperature by a J-integral method. For AA2519 + Mg + Ag, K{sub JlCi} decreases from 32.5 MPa {radical}m at 250 C to 28.5 MPa {radical}m at 175 C, while K{sub JlCi} for a lower Cu variant increases from 34.2 MPa {radical}m at 25 C to 36.0 Mpa {radical}m at 150 C. Crack-tip damage in AA2519 + Mg + Ag evolves by nucleation and growth of voids from large undissolved Al{sub 2}Cu particles, but fracture resistance is controlled by void sheeting coalescence associated with dispersoids. Quantitative fractography, three-dimensional (3-D) reconstruction of fracture surfaces, and metallographic crack profiles indicate that void sheeting is retarded as temperature increases from 25 C to 150 C, consistent with a rising fracture resistance. Primary microvoids nucleate from smaller constituent particles in the low Cu alloy, and fracture strain increases. A strain-controlled micromechanical model accurately predicts K{sub JlCi} as a function of temperature, but includes a critical distance parameter (l*) that is not definable a priori. Nearly constant initiation toughness for AA2519 + Mg + Ag is due to rising fracture strain with temperature, which balances the effects of decreasing flow strength, work hardening, and elastic modulus on the crack-tip strain distribution. Ambient temperature toughnesses of the low Cu variant are comparable to those of AA2519 + Mg + Ag, despite increased fracture strain, because of reduced constituent spacing and l*.

  15. Half-metallic antiferromagnetism in double perovskite BiPbCrCuO{sub 6}

    SciTech Connect

    Weng, Ke-Chuan; Wang, Y. K.

    2015-05-07

    The electronic structure and magnetic properties of BiPbCrCuO{sub 6} double perovskite are investigated based on first-principles density functional calculations with generalized gradient approximation (GGA) and GGA incorporated with Coulomb correlation interaction U (GGA + U). The results suggest the half-metallic (HM) and antiferromagnetic (AFM) properties of BiPbCrCuO{sub 6} double perovskite. The HM-AFM property of the double perovskite is caused by the double-exchange mechanism between neighboring Cr{sup 5+}(t{sub 2g}{sup 1}↓) and Cu{sup 2+}(t{sub 2g}{sup 3}↑t{sub 2g}{sup 3}↓e{sub g}{sup 2}↑e{sub g}↓) via the intermediate O{sup 2−}(2s{sup 2}2p{sup 6}) ion.

  16. Investigation on the interaction of nanoAg with Cu-Zn SOD.

    PubMed

    Zhang, Bin; Yu, Lei; Zhang, Ruijing; Liu, Yang; Liu, Rutao

    2015-12-01

    Silver nanoparticles (nanoAg) are used more and more widely, particularly because of their antimicrobial properties. The effect of exposure to nanoAg on the structure of superoxide dismutase (SOD) was thoroughly investigated using fluorescence measurements, synchronous fluorescence spectroscopy, steady-state and time-resolved fluorescence quenching measurements, UV/Vis absorption spectroscopy, resonance light scattering (RLS), circular dichroism (CD), isothermal titration calorimetry (ITC) and high-resolution transmission electron microscopy (HRTEM). Through van der Waal's force, nanoAg interacted with Cu-Zn SOD and influenced the active site by inducing structural changes, which influenced the function of SOD. The fluorescence studies show that both static and dynamic quenching processes occur. This paper provides reference data for toxicological studies of nanoAg, which are important in the future development of nanotechnology. PMID:25754791

  17. Sensitive and selective detection of Hg2+ and Cu2+ ions by fluorescent Ag nanoclusters synthesized via a hydrothermal method.

    PubMed

    Liu, Jing; Ren, Xiangling; Meng, Xianwei; Fang, Zheng; Tang, Fangqiong

    2013-10-21

    An easily prepared fluorescent Ag nanoclusters (Ag NCs) probe for the sensitive and selective detection of Hg(2+) and Cu(2+) ions was developed here. The Ag NCs were synthesized by using polymethacrylic acid sodium salt as a template via a convenient hydrothermal process. The as-prepared fluorescent Ag NCs were monodispersed, uniform and less than 2 nm in diameter, and can be quenched in the presence of mercury (Hg(2+)) or copper (Cu(2+)) ions. Excellent linear relationships existed between the quenching degree of the Ag NCs and the concentrations of Hg(2+) or Cu(2+) ions in the range of 10 nM to 20 μM or 10 nM to 30 μM, respectively. By using ethylenediaminetetraacetate (EDTA) as the masking agent of Cu(2+), Hg(2+) was exclusively detected in coexistence with Cu(2+) with high sensitivity (LOD = 10 nM), which also provided a reusable detection method for Cu(2+). Furthermore, the different quenching phenomena caused by the two metals ions such as changes in visible colour, shifts of UV absorbance peaks and changes in size of Ag NCs make it easy to distinguish between them. Therefore the easily synthesized fluorescent Ag NCs may have great potential as Hg(2+) and Cu(2+) ions sensors. PMID:24056730

  18. Sm-Nd dating of the giant Sullivan Pb-Zn-Ag deposit, British Columbia

    USGS Publications Warehouse

    Jiang, Shao-Yong; Slack, John F.; Palmer, Martin R.

    2000-01-01

    We report here Sm and Nd isotope data for hydrothermal tourmalinites and sulfide ores from the giant Sullivan Pb-Zn-Ag deposit, which occurs in the lower part of the Mesoproterozoic Purcell (Belt) Supergroup. Whole-rock samples of quartz-tourmaline tourmalinite from the footwall alteration pipe yield a Sm-Nd isochron age of 1470 ± 59 Ma, recording synsedimentary B metasomatism of clastic sediments during early evolution of the Sullivan hydrothermal system. Data for variably altered (chloritized and/or albitized) tourmalinites from the hanging wall of the deposit, which are believed to have formed originally ca. 1470 Ma, define a younger 1076 ± 77 Ma isochron because of resetting of Sm and Nd isotopes during Grenvillian metamorphism. HCl leachates of bedded Pb-Zn ore yield a Sm-Nd isochron age of 1451 ± 46 Ma, which is consistent with syngenetic-exhalative mineralization ca. 1470 Ma; this age could also reflect a slightly younger, epigenetic hydrothermal event. Results obtained for the Sullivan deposit indicate that the Sm-Nd geochronometer has the potential to directly date mineralization and alteration in stratabound sulfide deposits that are not amenable to dating by other isotope methods.

  19. Sm-Nd dating of the giant Sullivan Pb-Zn-Ag deposit, British Columbia

    NASA Astrophysics Data System (ADS)

    Jiang, Shao-Yong; Slack, John F.; Palmer, Martin R.

    2000-08-01

    We report here Sm and Nd isotope data for hydrothermal tourmalinites and sulfide ores from the giant Sullivan Pb-Zn-Ag deposit, which occurs in the lower part of the Mesoproterozoic Purcell (Belt) Supergroup. Whole-rock samples of quartz-tourmaline tourmalinite from the footwall alteration pipe yield a Sm-Nd isochron age of 1470 ± 59 Ma, recording synsedimentary B metasomatism of clastic sediments during early evolution of the Sullivan hydrothermal system. Data for variably altered (chloritized and/or albitized) tourmalinites from the hanging wall of the deposit, which are believed to have formed originally ca. 1470 Ma, define a younger 1076 ± 77 Ma isochron because of resetting of Sm and Nd isotopes during Grenvillian metamorphism. HCl leachates of bedded Pb-Zn ore yield a Sm-Nd isochron age of 1451 ± 46 Ma, which is consistent with syngenetic-exhalative mineralization ca. 1470 Ma; this age could also reflect a slightly younger, epigenetic hydrothermal event. Results obtained for the Sullivan deposit indicate that the Sm-Nd geochronometer has the potential to directly date mineralization and alteration in stratabound sulfide deposits that are not amenable to dating by other isotope methods.

  20. Martensitic transformation behavior in Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys

    SciTech Connect

    Jang, Jai-young; Chun, Su-jin; Kim, Nam-suk; Cho, Jeung-won; Kim, Jae-hyun; Yeom, Jong-taek; Kim, Jae-il; Nam, Tae-hyun

    2013-12-15

    Graphical abstract: - Highlights: • Ag, In and Sn were soluble in TiNi matrix, while Sb, Te, Tl, Pb and Bi were not. • The B2-R-B19′transformation occurred in Ti-Ni-(Ag, In, Sn) alloys. • Solid solution hardening was essential for inducing the B2-R transformation. - Abstract: The microstructures and transformation behaviors of Ti–Ni–X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys were investigated using electron probe micro-analysis (EPMA), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Micro Vickers hardness tests. All specimens consisted of Ti–Ni matrices and second phase particles. Ag, In and Sn were soluble in Ti–Ni matrices with a limited solubility (≤1.0 at%), while Sb, Te, Tl, Pb and Bi were not soluble. Two-stage B2-R-B19′ transformation occurred in Ti–48.8Ni–1.2Ag, Ti–49.0Ni–1.0In and Ti–49.0Ni–1.0Sn alloys, while one-stage B2-B19′ transformation occurred in Ti–49.0Ni–1.0Ag, Ti–49.0Ni–1.0Sb, Ti–49.0Ni–1.0Te, Ti–49.0Ni–1.0Pb and Ti–49.0Ni–1.0Bi alloys. Micro Vickers hardness of the alloys displaying the B2-R-B19′ transformation (Hv 250–368) was much larger than that (

  1. Metal arsonate polymers of Cd, Zn, Ag and Pb supported by 4-aminophenylarsonic acid

    SciTech Connect

    Lesikar-Parrish, Leslie A.; Neilson, Robert H.; Richards, Anne F.

    2013-02-15

    The coordination preferences of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, (p-arsanilic acid) with CdCl{sub 2}{center_dot}2.5H{sub 2}O, ZnCl{sub 2}, Ag(SO{sub 3}CF{sub 3}) and Pb(NO{sub 3}){sub 2} have been investigated affording five new metal arsonate polymers. The reaction between 4-aminophenylarsonic acid and CdCl{sub 2}{center_dot}2.5H{sub 2}O resulted in a one-dimensional polymer, [{l_brace}Cd(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}]{sub n}, 1, in which the polymeric chain is propagated by bridging chlorides. Exchange of CdCl{sub 2} for ZnCl{sub 2} afforded [{l_brace}Zn{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})(Cl){sub 2}{r_brace}(H{sub 2}O){sub 2}(Cl)]{sub n}, 2, featuring interlinked 6- and 8-membered [Zn-O-As] ring systems. The reaction of Ag(SO{sub 3}CF{sub 3}) with 4-aminophenylarsonic acid, afforded polymeric 3, [Ag(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2})]{sub n} where coordination of the amino group to the silver center is observed and [{l_brace}Ag{sub 2}(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3})({mu}2-SO{sub 3}CF{sub 3}){sub 2}{r_brace}(SO{sub 3}CF{sub 3}){sub 2}]{sub n}, 4. By comparison, the reaction of p-arsanilic acid with Pb(NO{sub 3}){sub 2} yielded a polymeric chain [Pb(4-NH{sub 3}C{sub 6}H{sub 4}AsO{sub 3}H)(NO{sub 3}){sub 2}]{sub n}, 5 of similar topology to 1. The structures of 1-5 have been indiscriminately characterized by single crystal X-ray diffraction and their composition supported by relevant spectroscopic techniques. A comparison of the structural features of these polymers is used to determine the coordination preference of the ligand and factors influencing structural motifs, for example, the role of the anion. - Graphical abstract: The reaction of 4-aminophenylarsonic acid, 4-NH{sub 2}C{sub 6}H{sub 4}AsO{sub 3}H{sub 2}, with cadmium, zinc, silver, and lead have resulted in

  2. Accumulation of Pb, Cd, Cu and Zn in plants and hyperaccumulator choice in Lanping lead-zinc mine area, China.

    PubMed

    Yanqun, Zu; Yuan, Li; Schvartz, Christian; Langlade, Laurent; Fan, Liu

    2004-06-01

    A field survey of higher terrestrial plants growing on Lanping lead-zinc mine, China were conducted to identify species accumulating exceptionally large concentrations of Pb, Cd, Cu and Zn of 20 samples of 17 plant species. Concentrations of Pb and Zn in soil and in plant were higher than that of Cu and Cd. Significant difference was observed among the average concentrations of four heavy metals in plants (except Cd and Cu) and in soil (except Pb and Zn) (P<0.05). For the enrichment coefficient of the four heavy metals in plant, the order of average was PbCu (P<0.05). The enrichment coefficients were higher than 1 in Llex plyneura and Rhododendron annae in Paomaping for Pb, Salix cathayana, L. plyneura and R. annae in Paomaping for Cd, and R. annae in Paomaping for Zn, respectively. Concentrations and enrichment coefficient of Pb, Cd and Zn of Rhododendron were higher than that of Gramimeae. Enrichment coefficient of Pb, Cd and Zn were bush>tree>herbaceous, and herbaceous grew in soil with the highest concentrations of four heavy metals. In different areas, the concentrations of Pb, Cd, Cu and Zn in plants and soils and enrichment coefficient were different. Plants in Paomaping had more accumulating ability to Pb, Cd and Zn, and plants in Jinfeng River had more accumulating ability to Cu. Six plant species, i.e. S. cathayana, Lithocarpus dealbatus, L. plyneura, Fargesia dura, Arundinella yunnanensis and R. annae in Paomaping, had high accumulation capacity. R. annae in Paomaping had hyperaccumulating capacity to Pb, Cd and Zn, L. plyneura to Pb and Cd, and S. cathayana to Cd, respectively. PMID:15031017

  3. (Mg,Pb)Sr 2(Y,Ca)Cu 2O 7, a new 60 K superconductor in the Pb-1:2:1:2 family

    NASA Astrophysics Data System (ADS)

    Liu, H. B.; Morris, D. E.; Sinha, A. P. B.

    1993-01-01

    (Mg,Pb)Sr 2(Y,Ca)Cu 2O 7, a new superconductor in the Pb-1:2:1:2 family, has been synthesized. The Y:Ca ratio and annealing conditions (oxygen pressure/temperature) have been optimized. Addition of silver oxide aids in increasing the superconducting volume fraction and raising Tc to 60 K. Since this Tc is comparable to that of other Pb-1:2:1:2 compounds, it is unlikely that Mg 2+ replaces Cu in the CuO 2 planes, in spite of its small radius ( r=0.72 Å); in that case a substantial depression of Tc would be expected. Instead, Mg 2+ appears to go into the PbO layer in a rock-salt surrounding, in analogy with other divalent elements.

  4. Valorization of biosorbent obtained from a forestry waste: Competitive adsorption, desorption and transport of Cd, Cu, Ni, Pb and Zn.

    PubMed

    Cutillas-Barreiro, Laura; Paradelo, Remigio; Igrexas-Soto, Alba; Núñez-Delgado, Avelino; Fernández-Sanjurjo, María José; Álvarez-Rodriguez, Esperanza; Garrote, Gil; Nóvoa-Muñoz, Juan Carlos; Arias-Estévez, Manuel

    2016-09-01

    Bark from Pinus pinaster is one of the most abundant forestry wastes in Europe, and among the proposed technologies for its reutilization, the removal of heavy metals from wastewater has been gaining increasing attention. In this work, we have studied the performance of pine bark for heavy metal biosorption on competitive systems. Pb, Cu, Ni, Zn and Cd sorption and desorption at equilibrium were studied in batch experiments, whereas transport was studied in column experiments. Batch experiments were performed adding simultaneously different concentrations (0.08-3.15mM) of two or more metals in solution to pine bark samples. Column experiments were performed with 10mM solutions of two metals or a 5mM solution of the five metals. In general, the results under competitive conditions were different to those obtained in monoelemental experiments. The multi-metal batch experiments showed the adsorption sequence Pb≈Cu>Cd>Zn>Ni for lower metal doses, Pb>Cu>Cd>Zn>Ni for intermediate doses, and Pb>Cu>Cd≈Zn≈Ni for high metal doses. Desorption followed the sequence PbPbCu and Pb suffered the highest retention, with high capacity to displace Cd, Ni and Zn from adsorption sites on pine bark. The transport experiments produced comparable results to those obtained in the batch experiments, with pine bark retention capacity following the sequence Pb>Cu>Zn>Cd>Ni. The presence of a second metal affected the transport of all the elements studied except Pb, and confirmed the strong influence of Pb and Cu on the retention of the other metals. These results can help to appropriately design decontamination systems using this forestry waste. PMID:27232204

  5. Active Brazing of C/C Composite to Copper by AgCuTi Filler Metal

    NASA Astrophysics Data System (ADS)

    Zhang, Kexiang; Xia, Lihong; Zhang, Fuqin; He, Lianlong

    2016-05-01

    Brazing between the carbon-fiber-reinforced carbon composite (C/C composite) and copper has gained increasing interest because of its important application in thermal management systems in nuclear fusion reactors and in the aerospace industry. In order to examine the "interfacial shape effect" on the mechanical properties of the joint, straight and conical interfacial configurations were designed and machined on the surface of C/C composites before joining to copper using an Ag-68.8Cu-4.5Ti (wt pct) alloy. The microstructure and interfacial microchemistry of C/C composite/AgCuTi/Cu brazed joints were comprehensively investigated by using high-resolution transmission electron microscopy. The results indicate that the joint region of both straight and conical joints can be described as a bilayer. Reaction products of Cu3Ti3O and γ-TiO were formed near the copper side in a conical interface joint, while no reaction products were found in the straight case. The effect of Ag on the interfacial reaction was discussed, and the formation mechanism of the joints during brazing was proposed. On the basis of the detailed microstructure presented, the mechanical performance of the brazed joints was discussed in terms of reaction and morphology across the joint.

  6. High temperature phase equilibria studies in the Bi-Sr-Ca-Cu-O-Ag system

    SciTech Connect

    Margulies, Lawrence

    1999-11-08

    A variety of experimental techniques were utilized to examine the high temperature phase equilibria in the Bi-Sr-Ca-Cu-O-Ag system. Quenching studies were used to determine the liquid solubility of Ag in the Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} (Bi2212) melt and the details of the peritectic decomposition pathway of Bi2212 as a function on Ag content and oxygen partial pressure (PO{sub 2}). A liquid immiscibility region between oxide and Ag liquids in the 8--98 at% range was found above 900 C. Two eutectics were found in the Bi2212-Ag pseudobinary. On the oxide rich side, a eutectic exists at approximately 4 at% Ag. On the Ag rich side, a eutectic exists at approximately 98 at% Ag at a temperature of 15 C below the melting point of pure Ag. Six distinct solid phases were found to be in equilibrium with the partial melt within the Ag content and PO{sub 2} range studied. The stability of these solid phases were found to be highly sensitive to PO{sub 2}, and to a much lesser extent Ag content. High temperature x-ray diffraction (HTXRD) studies of this system are in conflict with these results. It is suggested that these discrepancies are due to experimental artifacts caused by the significant thermal gradients and lack of full bulk sampling which is inherent in conventional HTXRD designs. In part 2, a new furnace design compatible with synchrotron radiation sources is introduced to address these problems. This design allows for full bulk sampling in a low thermal gradient environment using Debye-Scherrer transmission geometry. Sample spinning is also introduced in the design to eliminate preferred orientation and incomplete powder averaging and allow for quantitative phase analysis and structural refinement. Studies on model systems are presented to demonstrate the capabilities for high resolution structural studies (Al{sub 2}O{sub 3}) and time resolved phase transformation studies (SrCO{sub 3}). Finally, the Bi2212 system is examined to confirm the quenching results

  7. Immobilization of Cu, Pb and Zn in mine-contaminated soils using reactive materials.

    PubMed

    Navarro, Andrés; Cardellach, Esteve; Corbella, Mercé

    2011-02-28

    Immobilization processes were used to chemically stabilize soil contaminated with Cu, Pb and Zn from mine tailings and industrial impoundments. We examined the effectiveness of ordinary Portland cement (OPC), phosphoric acid and MgO at immobilizing Cu, Pb and Zn in soil contaminated by either mine tailings or industrial and mine wastes. The effectiveness was evaluated using column leaching experiments and geochemical modelling, in which we assessed possible mechanisms for metal immobilization using PHREEQC and Medusa numerical codes. Experimental results showed that Cu was mobilized in all the experiments, whereas Pb immobilization with H(3)PO(4) may have been related to the precipitation of chloropyromorphite. Thus, the Pb concentrations of leachates of pure mining and industrial contaminated soils (32-410 μg/l and 430-1000 μg/l, respectively) were reduced to 1-60 and 3-360 μg/l, respectively, in the phosphoric acid experiment. The mobilization of Pb at high alkaline conditions, when Pb(OH)(4)(-) is the most stable species, may be the main obstacle to the use of OPC and MgO in the immobilization of this metal. In the mining- and industry-contaminated soil, Zn was retained by OPC but removed by MgO. The experiments with OPC showed the Zn decrease in the leachates of mining soil from 226-1960 μg/l to 92-121 μg/l. In the industrial contaminated soil, the Zn decrease in the leachates was most elevated, showing >2500 μg/l in the leachates of contaminated soil and 76-173 μg/l in the OPC experiment. Finally, when H(3)PO(4) was added, Zn was mobilized. PMID:21190796

  8. Formation of Ag-Pd contacts on Y-Ba-CuO ceramic and contact properties

    NASA Astrophysics Data System (ADS)

    Gartsman, K. G.; Duguzhev, Sh. M.; Parfen'eva, L. S.; Smirnov, I. A.

    1991-01-01

    Ag-Pd (30 pct Pd) contacts were formed on pellets of Y-Ba-CuO ceramic in the process of powder compaction by pressing a thin layer of Ag-Pd alloy, deposited on a 6-micron-thick organic film, to the end surfaces of the ceramic pellet. Cold pressing was followed by annealing, during which the organic substrate burned out and a bond was formed between the ceramic and the metal alloy. The resistance of the contacts produced by this method is 0.0026 ohm/sq cm, which is significantly better than that of contacts produced by using silver pastes.

  9. Internally consistent database for sulfides and sulfosalts in the system Ag 2S-Cu 2S-ZnS-FeS-Sb 2S 3-As 2S 3: Update

    NASA Astrophysics Data System (ADS)

    Sack, Richard O.

    2005-03-01

    The thermodynamic database for Ag 2S-Cu 2S-ZnS-FeS-Sb 2S 3-As 2S 3 sulfides and sulfosalts applicable to temperatures above 119°C has been updated based on the results of recent petrologic, experimental, and theoretical studies. Solution and end-member properties of fahlore [˜(Ag,Cu) 10(Fe,Zn) 2(Sb,As) 4S 13] have been adjusted to allow for (1) revisions of the description of Fe-Zn partitioning with sphalerite that incorporate sphalerite activity-composition relations derived from the cluster variation method (CVM) model of a previous study, (2) the assumption that the miscibility gaps observed in high-Ag fahlores from the Husky Mine (Yukon, Canada) approximate a temperature of 170°C, and (3) an increase in the Ag-Cu partitioning between fahlore and polybasite (Ag,Cu) 16(Sb,As) 2S 11 required to reproduce compositions of fahlore in the polybasite + Sb-fahlore + ZnS sphalerite assemblage reported in previous experimental studies. The resulting minor parameter adjustments produce a database that demonstrably reproduces the composition data reported for a wide-range of sulfide ore deposits. They result in revised estimates for the Gibbs energies of formation of end-member fahlore components from the simple sulfides that, except for Cu 10Zn 2Sb 4S 13, are less temperature dependent than those previously inferred (at 200 and 400°C: -23.27 and -24.84 kJ/gfw for Ag 10Zn 2Sb 4S 13, -115.18 and -116.57 kJ/gfw for Cu 10Zn 2Sb 4S 13, -85.14 and -75.20 kJ/gfw for Cu 10Fe 2Sb 4S 13, and -3.81 and 9.10 kJ/gfw for Ag 10Fe 2Sb 4S 13). The database is extended to PbS-bearing supersystems containing the galena + fahlore + sphalerite assemblage. Predicted initial Ag-contents of galena calculated from this database agree with those inferred from petrological studies of Ag-Pb-Zn ores from the Coeur d'Alene district, Idaho, USA and Julcani, Peru.

  10. Photoproduced fluorescent Au(I)@(Ag2/Ag3)-thiolate giant cluster: an intriguing sensing platform for DMSO and Pb(II).

    PubMed

    Ganguly, Mainak; Mondal, Chanchal; Jana, Jayasmita; Pal, Anjali; Pal, Tarasankar

    2014-01-14

    Synergistic evolution of fluorescent Au(I)@(Ag2/Ag3)-thiolate core-shell particles has been made possible under the Sun in presence of the respective precursor coinage metal compounds and glutathione (GSH). The green chemically synthesized fluorescent clusters are giant (∼600 nm) in size and robust. Among all the common water miscible solvents, exclusively DMSO exhibits selective fluorescence quenching (Turn Off) because of the removal of GSH from the giant cluster. Again, only Pb(II) ion brings back the lost fluorescence (Turn On) leaving aside all other metal ions. This happens owing to the strong affinity of the sulfur donor of DMSO for Pb(II). Thus, employing the aqueous solution containing the giant cluster, we can detect DMSO contamination in water bodies at trace level. Besides, a selective sensing platform has emerged out for Pb(II) ion with a detection limit of 14 × 10(-8) M. Pb(II) induced fluorescence recovery is again vanished by I(-) implying a promising route to sense I(-) ion. PMID:24359547

  11. Evaluation of the microstructure of Al-Cu-Li-Ag-Mg Weldalite (tm) alloys, part 4

    NASA Technical Reports Server (NTRS)

    Pickens, Joseph R.; Kumar, K. S.; Brown, S. A.; Gayle, Frank W.

    1991-01-01

    Weldalite (trademark) 049 is an Al-Cu-Li-Ag-Mg alloy designed to have ultrahigh strength and to serve in aerospace applications. The alloy displays significantly higher strength than competitive alloys in both naturally aged and artificially aged tempers. The strengthening phases in such tempers have been identified to, in part, explain the mechanical properties attained. In general, the alloy is strengthened by delta prime Al3Li and Guinier-Preston (GP) zones in the naturally aged tempers. In artificially aged tempers in slightly underaged conditions, strengthening is provided by several phases including GP zones, theta prime Al2Cu, S prime Al2CuMg, T(sub 1) Al2CuLi, and possibly a new phase. In the peak strength artificially aged tempers, T(sub 1) is the predominant strengthening phase.

  12. Nanocatalyst superior to Pt for oxygen reduction reactions: the case of core/shell Ag(Au)/CuPd nanoparticles.

    PubMed

    Guo, Shaojun; Zhang, Xu; Zhu, Wenlei; He, Kai; Su, Dong; Mendoza-Garcia, Adriana; Ho, Sally Fae; Lu, Gang; Sun, Shouheng

    2014-10-22

    Controlling the electronic structure and surface strain of a nanoparticle catalyst has become an important strategy to tune and to optimize its catalytic efficiency for a chemical reaction. Using density functional theory (DFT) calculations, we predicted that core/shell M/CuPd (M = Ag, Au) NPs with a 0.8 or 1.2 nm CuPd2 shell have similar but optimal surface strain and composition and may surpass Pt in catalyzing oxygen reduction reactions. We synthesized monodisperse M/CuPd NPs by the coreduction of palladium acetylacetonate and copper acetylacetonate in the presence of Ag (or Au) nanoparticles with controlled shell thicknesses of 0.4, 0.75, and 1.1 nm and CuPd compositions and evaluated their catalysis for the oxygen reduction reaction in 0.1 M KOH solution. As predicted, our Ag/Cu37Pd63 and Au/Cu40Pd60 catalysts with 0.75 and 1.1 nm shells were more efficient catalysts than the commercial Pt catalyst (Fuel Cells Store), with their mass activity reaching 0.20 A/mg of noble metal at -0.1 V vs Ag/AgCl (4 M KCl); this was over 3 times higher than that (0.06 A/mg Pt) from the commercial Pt. These Ag(Au)/CuPd nanoparticles are promising non-Pt catalysts for oxygen reduction reactions. PMID:25279704

  13. Influence of Fluoride Ion on the Performance of Pb-Ag Anode During Long-Term Galvanostatic Electrolysis

    NASA Astrophysics Data System (ADS)

    Zhong, Xiaocong; Yu, Xiaoying; Jiang, Liangxing; Lv, Xiaojun; Liu, Fangyang; Lai, Yanqing; Li, Jie

    2015-09-01

    Anodic potential, morphology and phase composition of the anodic layer, corrosion morphology of the metallic substrate, and oxygen evolution behavior of Pb-Ag anode in H2SO4 solution without/with fluoride ion were investigated and compared. The results showed that the presence of fluoride ions contributed to a smoother anodic layer with lower PbO2 concentration, which resulted in lower double layer capacity and higher charge transfer resistance for the oxygen evolution reaction. Consequently, the Pb-Ag anode showed a higher anodic potential (about 35 mV) in the fluoride-containing electrolyte. In addition, the fluoride ions accelerated the detachment of loose flakes on the anodic layer. It was demonstrated that the anodic layer formed in the fluoride-containing H2SO4 solution was thinner. Furthermore, fluoride ions aggravated the corrosion of the metallic substrate at interdendritic boundary regions. Hence, the presence of fluoride ions is detrimental to oxygen evolution reactivity and increases the corrosion of the Pb-Ag anode, which may further increase the energy consumption and capital cost of zinc plants.

  14. High resolution electron microscopy study of a high Cu variant of Weldalite (tm) 049 and a high strength Al-Cu-Ag-Mg-Zr alloy

    NASA Technical Reports Server (NTRS)

    Herring, R. A.; Gayle, Frank W.; Pickens, Joseph R.

    1991-01-01

    Weldalite (trademark) 049 is an Al-Cu-Li-Ag-Mg alloy that is strengthened in artificially aged tempers primarily by very thin plate-like precipitates lying on the set of (111) matrix planes. This precipitate might be expected to be the T(sub 1) phase, Al2CuLi, which has been observed in Al-Cu-Li alloys. However, in several ways this precipitate is similar to the omega phase which also appears as the set of (111) planes plates and is found in Al-Cu-Ag-Mg alloys. The study was undertaken to identify the set of (111) planes precipitate or precipitates in Weldalite (trademark) 049 in the T8 (stretched and artificially aged) temper, and to determine whether T(sub 1), omega, or some other phase is primarily responsible for the high strength (i.e., 700 MPa tensile strength) in this Al-Cu-Li-Ag-Mg alloy.

  15. Mechanisms of wear in single- and two-phase materials: Final report. [Cu, Pb, Al/sub 2/O/sub 3/, Pb borosilicate glass, SiC (Pb-Cu), (Pb-Al/sub 2/O/sub 3/), (glass-Cu), (glass-Al/sub 2/O/sub 3/)

    SciTech Connect

    Macmillan, N.H.

    1987-11-01

    A comparative study has been made of the rolling-tumbling-sliding wear and solid particle erosion behavior of four single-phase materials (Cu, Pb, Al/sub 2/O/sub 3/, and a lead borosilicate glass and of series of ductile-ductile (Pb-Cu), ductile-brittle (Pb-Al/sub 2/O/sub 3/), brittle-ductile (glass-Cu), and brittle-brittle (glass-Al/sub 2/O/sub 3/) composites prepared from them. The same irregularly shaped 600 ..mu..m WC-8 wt.% Co abrasive particles were used throughout this work. Additional erosion measurements have been made on Danto Koruntz, Abresist, and sintered ..cap alpha..-SiC, using similar particles. Some subtle influences of erosive particle wear are documented for the first time, and the inadequacy of the currently available theoretical models to describe the influence of microstructure on erosion is exposed. 77 refs., 154 figs.

  16. Impacts of Pristine and Transformed Ag and Cu Engineered Nanomaterials on Surficial Sediment Microbial Communities Appear Short-Lived.

    PubMed

    Moore, Joe D; Stegemeier, John P; Bibby, Kyle; Marinakos, Stella M; Lowry, Gregory V; Gregory, Kelvin B

    2016-03-01

    Laboratory-based studies have shown that many soluble metal and metal oxide engineered nanomaterials (ENM) exert strong toxic effects on microorganisms. However, laboratory-based studies lack the complexity of natural systems and often use "as manufactured" ENMs rather than more environmentally relevant transformed ENMs, leaving open the question of whether natural ligands and seasonal variation will mitigate ENM impacts. Because ENMs will accumulate in subaquatic sediments, we examined the effects of pristine and transformed Ag and Cu ENMs on surficial sediment microbial communities in simulated freshwater wetlands. Five identical mesocosms were dosed through the water column with either Ag(0), Ag2S, CuO or CuS ENMs (nominal sizes of 4.67 ± 1.4, 18.1 ± 3.2, 31.1 ± 12, and 12.4 ± 4.1, respectively) or Cu(2+). Microbial communities were examined at 0, 7, 30, 90, 180, and 300 d using qPCR and high-throughput 16S rRNA gene sequencing. Results suggest differential short-term impacts of Ag(0) and Ag2S, similarities between CuO and CuS, and differences between Cu ENMs and Cu(2+). PICRUSt-predicted metagenomes displayed differential effects of Ag treatments on photosynthesis and of Cu treatments on methane metabolism. By 300 d, all metrics pointed to reconvergence of ENM-dosed mesocosm microbial community structure and composition, suggesting that the long-term microbial community impacts from a pulse of Ag or Cu ENMs are limited. PMID:26841726

  17. The structure of a commercial dental Ag-Pd-Cu-Au casting alloy.

    PubMed

    Niemi, L; Herø, H

    1984-02-01

    The structure of a commercial dental Ag-Pd-Cu-Au casting alloy has been studied by microprobe and X-ray diffraction analyses after various heat treatments. The composition of phases in equilibrium was established. After being annealed at 400 degrees C, 500 degrees C, and 600 degrees C for seven wk, the alloy consisted of three phases: a Cu- and Pd-rich fee phase (alpha 1) with alpha = 0.372nm, a Ag-rich matrix (alpha 2) with alpha = 0.399nm, and an ordered CsCl-type bcc PdCu phase with alpha = 0.296nm. The PdCu phase was not observed above 600 degrees C, and the proportion of the alpha 1 phase decreased sharply above 700 degrees C. After being annealed at 900 degrees C, the alloy matrix was partly decomposed at the Cu-enriched grain boundaries. The decomposed areas grew into the grain interior during subsequent precipitation hardening. No segregation of Au was detected after casting, and the element was evenly distributed throughout the alloy structure after all heat treatments. PMID:6582096

  18. Scanning tunneling microscope-induced modification of Cu(100) surfaces and Ag nanowire arrays

    NASA Astrophysics Data System (ADS)

    Leibsle, Fred; York, Mike; Aurongzeb, Deeder

    2001-03-01

    We have used scanning tunneling microscopy to selectively modify areas of Cu(100) surfaces. By scanning repeatedly over areas with extremely low bias voltages and high tunneling currents, we can create nanometer-scale pits several layers deep. The atoms removed from these pits form nearby islands. The evolution of these pits and islands is also studied with images showing changes in shape, coalescence and both rapid and gradual decay. We also demonstrate how we can selectively modify segments of Ag nanowire arrays grown on atomic nitrogen-modified Cu(100) surfaces.

  19. Effect of Surplus Phase on the Microstructure and Mechanical Properties in Al-Cu-Mg-Ag Alloys with High Cu/Mg Ratio

    NASA Astrophysics Data System (ADS)

    Xu, Xiaofeng; Zhao, Yuguang; Wang, Xudong; Zhang, Ming; Ning, Yuheng

    2015-11-01

    In order to examine the effect of surplus phase on the microstructure and mechanical properties, different compositions with high Cu/Mg ratio of the T6-temper extruded Al-Cu-Mg-Ag alloys were studied in this investigation. The results show that the Al-5.6Cu-0.56Mg-0.4Ag alloy obtains superior mechanical properties at room temperature, while the yield strength of Al-6.3Cu-0.48Mg-0.4Ag alloy is 378 MPa at 200 °C, which is 200 MPa higher than that of Al-5.6Cu-0.56Mg-0.4Ag alloy. Although the excessive Cu content causes the slight strength loss and elongation decrease in the Al-6.3Cu-0.48Mg-0.4Ag alloy at room temperature, the surplus phases and recrystallized microstructure will play an effective role in strengthening the alloy at elevated temperature.

  20. Characterization of Binary Ag-Cu Ion Mixtures in Zeolites: Their Reduction Products and Stability to Air Oxidation

    SciTech Connect

    Fiddy, Steven; Petranovskii, Vitalii; Ogden, Steve; Iznaga, Inocente Rodriguez

    2007-02-02

    A series of Ag+-Cu2+ binary mixtures with different Ag/Cu ratios were supported on mordenite with different Si/Al ratios and were subsequently reduced under hydrogen in the temperature range 323K - 473K. Ag and Cu K-edge X-ray Absorption Spectroscopy (XAS) was conducted on these systems in-situ to monitor the reduction species formed and the kinetics of their reduction. In-situ XANES clearly demonstrates that the formation of silver particles is severely impeded by the addition of copper and that the copper is converted from Cu(II) to Cu(I) during reduction and completely reverts back to Cu(II) during cooling. There are no indications at any stage of the formation of bimetallic Ag-Cu clusters. Interestingly, the Ag/Cu ratio appears to have no influence of the reduction kinetics and reduction products formed with only the highest Si/Al ratio (MR = 128) investigated during this study having an influence on the reduction and stability to air oxidation.

  1. Nucleation and Growth of Cu-Al Intermetallics in Al-Modified Sn-Cu and Sn-Ag-Cu Lead-Free Solder Alloys

    NASA Astrophysics Data System (ADS)

    Reeve, Kathlene N.; Anderson, Iver E.; Handwerker, Carol A.

    2015-03-01

    Lead-free solder alloys Sn-Cu (SC) and Sn-Ag-Cu (SAC) are widely used by the microelectronics industry, but enhanced control of the microstructure is needed to improve solder performance. For such control, nucleation and stability of Cu-Al intermetallic compound (IMC) solidification catalysts were investigated by variation of the Cu (0.7-3.0 wt.%) and Al (0.0-0.4 wt.%) content of SC + Al and SAC + Al alloys, and of SAC + Al ball-grid array (BGA) solder joints. All of the Al-modified alloys produced Cu-Al IMC particles with different morphologies and phases (occasionally non-equilibrium phases). A trend of increasing Cu-Al IMC volume fraction with increasing Al content was established. Because of solidification of non-equilibrium phases in wire alloy structures, differential scanning calorimetry (DSC) experiments revealed delayed, non-equilibrium melting at high temperatures related to quenched-in Cu-Al phases; a final liquidus of 960-1200°C was recorded. During cooling from 1200°C, the DSC samples had the solidification behavior expected from thermodynamic equilibrium calculations. Solidification of the ternary alloys commenced with formation of ternary β and Cu-Al δ phases at 450-550°C; this was followed by β-Sn, and, finally, Cu6Sn5 and Cu-Al γ1. Because of the presence of the retained, high-temperature phases in the alloys, particle size and volume fraction of the room temperature Cu-Al IMC phases were observed to increase when the alloy casting temperature was reduced from 1200°C to 800°C, even though both temperatures are above the calculated liquidus temperature of the alloys. Preliminary electron backscatter diffraction results seemed to show Sn grain refinement in the SAC + Al BGA alloy.

  2. Efficient enhancement of hydrogen production by Ag/Cu2O/ZnO tandem triple-junction photoelectrochemical cell

    NASA Astrophysics Data System (ADS)

    Liu, Ying; Ren, Feng; Shen, Shaohua; Fu, Yanming; Chen, Chao; Liu, Chang; Xing, Zhuo; Liu, Dan; Xiao, Xiangheng; Wu, Wei; Zheng, Xudong; Liu, Yichao; Jiang, Changzhong

    2015-03-01

    Highly efficient semiconductor photoelectrodes for solar hydrogen production through photocatalytic water splitting are a promising and challenge solution to solve the energy problems. In this work, Ag/Cu2O/ZnO tandem triple-junction photoelectrode was designed and prepared. An increase of 11 times of photocurrent is achieved in the Ag/Cu2O/ZnO photoelectrode comparing to that of the Cu2O film. The high performance of the Ag/Cu2O/ZnO film is due to the optimized design of the tandem triple-junction structure, where the localized surface Plasmon resonance of Ag and the hetero-junctions efficiently absorb solar energy, produce, and separate electron-hole pairs in the photocathode.

  3. Ag-Cu nanoalloyed film as a high-performance cathode electrocatalytic material for zinc-air battery

    NASA Astrophysics Data System (ADS)

    Lei, Yimin; Chen, Fuyi; Jin, Yachao; Liu, Zongwen

    2015-04-01

    A novel Ag50Cu50 film electrocatalyst for oxygen reduction reaction (ORR) was prepared by pulsed laser deposition (PLD) method. The electrocatalyst actually is Ag-Cu alloyed nanoparticles embedded in amorphous Cu film, based on transmission electron microscopy (TEM) characterization. The rotating disk electrode (RDE) measurements provide evidence that the ORR proceed via a four-electron pathway on the electrocatalysts in alkaline solution. And it is much more efficient than pure Ag catalyst. The catalytic layer has maximum power density of 67 mW cm-2 and an acceptable cell voltage at 0.863 V when current densities increased up to 100 mA cm-2 in the Ag50Cu50-based primary zinc-air battery. The resulting rechargeable zinc-air battery exhibits low charge-discharge voltage polarization of 1.1 V at 20 mAcm-2 and high durability over 100 cycles in natural air.

  4. Size and alloying induced shift in core and valence bands of Pd-Ag and Pd-Cu nanoparticles

    SciTech Connect

    Sengar, Saurabh K.; Mehta, B. R.; Govind

    2014-03-28

    In this report, X-ray photoelectron spectroscopy studies have been carried out on Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles having identical sizes corresponding to mobility equivalent diameters of 60, 40, and 20 nm. The nanoparticles were prepared by the gas phase synthesis method. The effect of size on valence and core levels in metal and alloy nanoparticles has been studied by comparing the values to those with the 60 nm nanoparticles. The effect of alloying has been investigated by comparing the valence and core level binding energies of Pd-Cu and Pd-Ag alloy nanoparticles with the corresponding values for Pd, Ag, and Cu nanoparticles of identical sizes. These effects have been explained in terms of size induced lattice contractions, alloying induced charge transfer, and hybridization effects. The observation of alloying and size induced binding energy shifts in bimetallic nanoparticles is important from the point of view of hydrogen reactivity.

  5. Nanostructured YbAgCu4 for potentially cryogenic thermoelectric cooling.

    PubMed

    Koirala, Machhindra; Wang, Hui; Pokharel, Mani; Lan, Yucheng; Guo, Chuanfei; Opeil, Cyril; Ren, Zhifeng

    2014-09-10

    We have studied the thermoelectric properties of nanostructured YbAgCu4 materials. A high power factor of ∼131 μW cm(-1) K(-2) has been obtained at 22 K for nanostructured samples prepared by ball milling the arc melted ingot into nanopowder and hot pressing the nanopowder. The implementation of nanostructuring method decreased the thermal conductivity at 42 K by 30-50% through boundary scattering comparing with the previously reported value of polycrystalline YbAgCu4. A peak dimensionless thermoelectric figure-of-merit, ZT, of 0.11 has been achieved at 42 K, which may find potential applications for cryogenic cooling below 77 K. The nanostructuring approach can be extended to other heavy Fermion materials to achieve high power factor and low thermal conductivity and ultimately higher ZT. PMID:25079115

  6. Formation of M-C≡C-Cl (m = ag or Cu) and Characterization by Rotational Spectroscopy

    NASA Astrophysics Data System (ADS)

    Zaleski, Daniel P.; Tew, David Peter; Walker, Nick; Legon, Anthony

    2015-06-01

    The new linear molecule Ag-C≡C-Cl has been detected and characterized by means of rotational spectroscopy. It was synthesized by laser ablation of a slver rod in the presence of a gaseous sample containing a low concentration of CCl4 in argon, cooled to a rotational temperature approaching 2 K through supersonic expansion and analyzed by chirped pulse Fourier transform microwave spectroscopy. Substitution coordinates are available for the silver and chlorine positions and will be compared to ab initio calculations at the CCSD(T)/aug-cc-pV5Z level of theory. The Ag-13C≡13C-Cl isotopologue was also observed using a similar gas mixture containing 13CCl4. The Cu analogue Cu-C≡C-Cl was similarly identified and characterized.

  7. Thermal Expansion and Second Harmonic Generation Response of the Tungsten Bronze Pb2AgNb5O15.

    PubMed

    Lin, Kun; Gong, Pifu; Sun, Jing; Ma, Hongqiang; Wang, You; You, Li; Deng, Jinxia; Chen, Jun; Lin, Zheshuai; Kato, Kenichi; Wu, Hui; Huang, Qingzhen; Xing, Xianran

    2016-03-21

    The incorporation of transition metal element Ag was performed to explore negative thermal expansion (NTE) materials with tetragonal tungsten bronze (TTB) structures. In this study, the structure and thermal expansion behaviors of a polar TTB oxide, Pb2AgNb5O15 (PAN), were systematically investigated by high-resolution synchrotron powder diffraction, high-resolution neutron powder diffraction, transmission electron microscope (TEM), and high-temperature X-ray diffractions. The TEM and Rietveld refinements revealed that the compound PAN displays (√2a(TTB), √2b(TTB), 2c(TTB))-type superstructure. This superstructure within the a-b plane is caused by the ordering of A-site cations, while the doubling of the c axis is mainly induced by a slight tilt distortion of the NbO6 octahedra. The transition metal Ag has larger spontaneous polarization displacements than Pb, but the Pb-O covalence seems to be weakened compared to the potassium counterpart Pb2KNb5O15 (PKN), which may account for the similar Curie temperature and uniaxial NTE behavior for PAN and PKN. Powder second harmonic generation (SHG) measurement indicates that PAN displays a moderate SHG response of ∼0.2 × LiNbO3 (or ∼100 × α-SiO2) under 1064 nm laser radiation. The magnitudes of the local dipole moments in NbO6 and PbOx polyhedra were quantified using bond-valence approach. We show that the SHG response stems from the superposition of dipole moments of both the PbO(x) and NbO6 polyhedra. PMID:26928907

  8. Pollution, fractionation, and mobility of Pb, Cd, Cu, and Zn in garden and paddy soils from a Pb/Zn mining area.

    PubMed

    Lei, Ming; Zhang, Yong; Khan, Sardan; Qin, Pu-feng; Liao, Bo-han

    2010-09-01

    This study was conducted to investigate the pollution load index, fraction distributions, and mobility of Pb, Cd, Cu, and Zn in garden and paddy soils collected from a Pb/Zn mine in Chenzhou City, China. The samples were analyzed using Leleyter and Probst's sequential extraction procedures. Total metal concentrations including Pb, Cd, Cu, and Zn exceeded the maximum permissible limits for soils set by the Ministry of Environmental Protection of China, and the order of the pollution index was Cd > Zn > Pb > Cu, indicating that the soils from both sites seriously suffered from heavy metal pollution, especially Cd. The sums of metal fractions were in agreement with the total contents of heavy metals. However, there were significant differences in fraction distributions of heavy metals in garden and paddy soils. The residual fractions of heavy metals were the predominant form with 43.0% for Pb, 32.3% for Cd, 33.5% for Cu, and 44.2% for Zn in garden soil, while 51.6% for Pb, 40.4% for Cd, 40.3% for Cu, and 40.9% for Zn in paddy soil. Furthermore, the proportions of water-soluble and exchangeable fractions extracted by the selected analytical methods were the lowest among all fractions. On the basis of the speciation of heavy metals, the mobility factor values of heavy metals have the following order: Cd (25.2-19.8%) > Cu (22.6-6.3%) > Zn (9.6-6.0%) > Pb (6.7-2.5%) in both contaminated soils. PMID:19669583

  9. Microstructure-property relationships in Al-Cu-Li-Ag-Mg Weldalite (tm) alloys, part 2

    NASA Technical Reports Server (NTRS)

    Langan, T. J.; Pickens, J. R.

    1991-01-01

    The microstructure and mechanical properties of the ultrahigh strength Al-Cu-Li-Ag-Mg alloy, Weldalite (tm) 049, were studied. Specifically, the microstructural features along with tensile strength, weldability, Young's modulus and fracture toughness were studied for Weldalite (tm) 049 type alloys with Li contents ranging from 1.3 to 1.9 wt. pct. The tensile properties of Weldalite 049 and Weldalite 049 reinforced with TiB2 particles fabricated using the XD (tm) process were also evaluated at cryogenic, room, and elevated temperatures. In addition, an experimental alloy, similar in composition to Weldalite 049 but without the Ag+Mg, was fabricated. The microstructure of this alloy was compared with that of Weldalite 049 in the T6 condition to assess the effect of Ag+Mg on nucleation of strengthening phases in the absence of cold work.

  10. Cu-In-Te and Ag-In-Te colloidal nanocrystals with tunable composition and size.

    PubMed

    Yarema, Olesya; Yarema, Maksym; Lin, Weyde M M; Wood, Vanessa

    2016-09-18

    We synthesize stable colloids of Cu-In-Te and Ag-In-Te nanocrystals using an amide-promoted technique, which enables independent size and composition control, and report the dependence of structural and optical properties on composition and size. Comparison to the synthesis of other ternary I-III-VI nanocrystals gives insight into the reaction mechanism and the generalizability of the amide-promote approach. PMID:27530620

  11. Chemical immobilization of Pb, Cu, and Cd by phosphate materials and calcium carbonate in contaminated soils.

    PubMed

    Huang, Guoyong; Su, Xiaojuan; Rizwan, Muhammad Shahid; Zhu, Yifei; Hu, Hongqing

    2016-08-01

    Soil contamination with toxic metals has increasingly become a global concern over the past few decades. Phosphate and carbonate compounds are good passivation materials for Pb immobilization, while the effect of phosphate and carbonate on the immobilization of multiple heavy metals (Pb, Cu, and Cd) in contaminated soils was seldom investigated. In this study, bone meal (BM), phosphate rock (PR), oxalic acid-activated phosphate rock (APR), super phosphate (SP), and calcium carbonate (CC) were added to the contaminated soils to evaluate the effect of phosphate materials and calcium carbonate on the immobilization of Pb, Cu, and Cd. The results showed that the pH of the treated soils increased 1.3-2.7, except SP which decreased 0.5 at most. Compared to the control treatment, all phosphates and calcium carbonate added to the polluted soils increased the fraction of residual metals, and the application of APR, PR, BM, and CC significantly reduced exchangeable and carbonate-bound fraction metals. PR and APR were the most effective for the immobilization of Pb, Cu, and Cd in the soils among these materials. Moreover, the concentrations of all metals in the toxicity characteristic leaching procedure (TCLP) leachate decreased with increasing amounts of amendments, and the concentrations of Pb in the TCLP leachate for soils treated with PR and APR were below the nonhazardous regulatory limit of 5 mg L(-1) (US Environmental Protection Agency). Based on our results, phosphate rock and oxalic acid-activated phosphate rock are effective in the immobilization of multiple metals by reducing their mobility in the co-contaminated soils. PMID:27197655

  12. Leaching potential of pervious concrete and immobilization of Cu, Pb and Zn using pervious concrete

    NASA Astrophysics Data System (ADS)

    Solpuker, U.; Sheets, J.; Kim, Y.; Schwartz, F. W.

    2014-06-01

    This paper investigates the leaching potential of pervious concrete and its capacity for immobilizing Cu, Pb and Zn, which are common contaminants in urban runoff. Batch experiments showed that the leachability of Cu, Pb and Zn increased when pH < 8. According to PHREEQC equilibrium modeling, the leaching of major ions and trace metals was mainly controlled by the dissolution/precipitation and surface complexation reactions, respectively. A 1-D reactive transport experiment was undertaken to better understand how pervious concrete might function to attenuate contaminant migration. A porous concrete block was sprayed with low pH water (pH = 4.3 ± 0.1) for 190 h. The effluent was highly alkaline (pH ~ 10 to 12). In the first 50 h, specific conductance and trace-metal were high but declined towards steady state values. PHREEQC modeling showed that mixing of interstitial alkaline matrix waters with capillary pore water was required in order to produce the observed water chemistry. The interstitial pore solutions seem responsible for the high pH values and relatively high concentrations of trace metals and major cations in the early stages of the experiment. Finally, pervious concrete was sprayed with a synthetic contaminated urban runoff (10 ppb Cu, Pb and Zn) with a pH of 4.3 ± 0.1 for 135 h. It was found that Pb immobilization was greater than either Cu or Zn. Zn is the most mobile among three and also has the highest variation in the observed degree of immobilization.

  13. Leaching potential of pervious concrete and immobilization of Cu, Pb and Zn using pervious concrete.

    PubMed

    Solpuker, U; Sheets, J; Kim, Y; Schwartz, F W

    2014-06-01

    This paper investigates the leaching potential of pervious concrete and its capacity for immobilizing Cu, Pb and Zn, which are common contaminants in urban runoff. Batch experiments showed that the leachability of Cu, Pb and Zn increased when pH<8. According to PHREEQC equilibrium modeling, the leaching of major ions and trace metals was mainly controlled by the dissolution/precipitation and surface complexation reactions, respectively. A 1-D reactive transport experiment was undertaken to better understand how pervious concrete might function to attenuate contaminant migration. A porous concrete block was sprayed with low pH water (pH=4.3±0.1) for 190 h. The effluent was highly alkaline (pH~10 to 12). In the first 50 h, specific conductance and trace-metal were high but declined towards steady state values. PHREEQC modeling showed that mixing of interstitial alkaline matrix waters with capillary pore water was required in order to produce the observed water chemistry. The interstitial pore solutions seem responsible for the high pH values and relatively high concentrations of trace metals and major cations in the early stages of the experiment. Finally, pervious concrete was sprayed with a synthetic contaminated urban runoff (10 ppb Cu, Pb and Zn) with a pH of 4.3±0.1 for 135 h. It was found that Pb immobilization was greater than either Cu or Zn. Zn is the most mobile among three and also has the highest variation in the observed degree of immobilization. PMID:24748027

  14. Electromigration induced Kirkendall void growth in Sn-3.5Ag/Cu solder joints

    SciTech Connect

    Jung, Yong; Yu, Jin

    2014-02-28

    Effects of electric current flow on the Kirkendall void formation at solder joints were investigated using Sn-3.5Ag/Cu joints specially designed to have localized nucleation of Kirkendall voids at the Cu{sub 3}Sn/Cu interface. Under the current density of 1 × 10{sup 4} A/cm{sup 2}, kinetics of Kirkendall void growth and intermetallic compound thickening were affected by the electromigration (EM), and both showed the polarity effect. Cu{sub 6}Sn{sub 5} showed a strong susceptibility to the polarity effect, while Cu{sub 3}Sn did not. The electromigration force induced additional tensile (or compressive) stress at the cathode (or anode), which accelerated (or decelerated) the void growth. From the measurements of the fraction of void at the Cu{sub 3}Sn/Cu interface on SEM micrographs and analysis of the kinetics of void growth, the magnitude of the local stress induced by EM was estimated to be 9 MPa at the anode and −7 MPa at the cathode.

  15. Ag-Pd-Cu alloy inserted transparent indium tin oxide electrodes for organic solar cells

    SciTech Connect

    Kim, Hyo-Joong; Seo, Ki-Won; Kim, Han-Ki; Noh, Yong-Jin; Na, Seok-In

    2014-09-01

    The authors report on the characteristics of Ag-Pd-Cu (APC) alloy-inserted indium tin oxide (ITO) films sputtered on a glass substrate at room temperature for application as transparent anodes in organic solar cells (OSCs). The effect of the APC interlayer thickness on the electrical, optical, structural, and morphological properties of the ITO/APC/ITO multilayer were investigated and compared to those of ITO/Ag/ITO multilayer electrodes. At the optimized APC thickness of 8 nm, the ITO/APC/ITO multilayer exhibited a resistivity of 8.55 × 10{sup −5} Ω cm, an optical transmittance of 82.63%, and a figure-of-merit value of 13.54 × 10{sup −3} Ω{sup −1}, comparable to those of the ITO/Ag/ITO multilayer. Unlike the ITO/Ag/ITO multilayer, agglomeration of the metal interlayer was effectively relieved with APC interlayer due to existence of Pd and Cu elements in the thin region of the APC interlayer. The OSCs fabricated on the ITO/APC/ITO multilayer showed higher power conversion efficiency than that of OSCs prepared on the ITO/Ag/ITO multilayer below 10 nm due to the flatness of the APC layer. The improved performance of the OSCs with ITO/APC/ITO multilayer electrodes indicates that the APC alloy interlayer prevents the agglomeration of the Ag-based metal interlayer and can decrease the thickness of the metal interlayer in the oxide-metal-oxide multilayer of high-performance OSCs.

  16. Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses

    NASA Astrophysics Data System (ADS)

    Liu, Yanhui; Padmanabhan, Jagannath; Cheung, Bettina; Liu, Jingbei; Chen, Zheng; Scanley, B. Ellen; Wesolowski, Donna; Pressley, Mariyah; Broadbridge, Christine C.; Altman, Sidney; Schwarz, Udo D.; Kyriakides, Themis R.; Schroers, Jan

    2016-05-01

    Metallic alloys are normally composed of multiple constituent elements in order to achieve integration of a plurality of properties required in technological applications. However, conventional alloy development paradigm, by sequential trial-and-error approach, requires completely unrelated strategies to optimize compositions out of a vast phase space, making alloy development time consuming and labor intensive. Here, we challenge the conventional paradigm by proposing a combinatorial strategy that enables parallel screening of a multitude of alloys. Utilizing a typical metallic glass forming alloy system Zr-Cu-Al-Ag as an example, we demonstrate how glass formation and antibacterial activity, two unrelated properties, can be simultaneously characterized and the optimal composition can be efficiently identified. We found that in the Zr-Cu-Al-Ag alloy system fully glassy phase can be obtained in a wide compositional range by co-sputtering, and antibacterial activity is strongly dependent on alloy compositions. Our results indicate that antibacterial activity is sensitive to Cu and Ag while essentially remains unchanged within a wide range of Zr and Al. The proposed strategy not only facilitates development of high-performing alloys, but also provides a tool to unveil the composition dependence of properties in a highly parallel fashion, which helps the development of new materials by design.

  17. Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses.

    PubMed

    Liu, Yanhui; Padmanabhan, Jagannath; Cheung, Bettina; Liu, Jingbei; Chen, Zheng; Scanley, B Ellen; Wesolowski, Donna; Pressley, Mariyah; Broadbridge, Christine C; Altman, Sidney; Schwarz, Udo D; Kyriakides, Themis R; Schroers, Jan

    2016-01-01

    Metallic alloys are normally composed of multiple constituent elements in order to achieve integration of a plurality of properties required in technological applications. However, conventional alloy development paradigm, by sequential trial-and-error approach, requires completely unrelated strategies to optimize compositions out of a vast phase space, making alloy development time consuming and labor intensive. Here, we challenge the conventional paradigm by proposing a combinatorial strategy that enables parallel screening of a multitude of alloys. Utilizing a typical metallic glass forming alloy system Zr-Cu-Al-Ag as an example, we demonstrate how glass formation and antibacterial activity, two unrelated properties, can be simultaneously characterized and the optimal composition can be efficiently identified. We found that in the Zr-Cu-Al-Ag alloy system fully glassy phase can be obtained in a wide compositional range by co-sputtering, and antibacterial activity is strongly dependent on alloy compositions. Our results indicate that antibacterial activity is sensitive to Cu and Ag while essentially remains unchanged within a wide range of Zr and Al. The proposed strategy not only facilitates development of high-performing alloys, but also provides a tool to unveil the composition dependence of properties in a highly parallel fashion, which helps the development of new materials by design. PMID:27230692

  18. Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses

    PubMed Central

    Liu, Yanhui; Padmanabhan, Jagannath; Cheung, Bettina; Liu, Jingbei; Chen, Zheng; Scanley, B. Ellen; Wesolowski, Donna; Pressley, Mariyah; Broadbridge, Christine C.; Altman, Sidney; Schwarz, Udo D.; Kyriakides, Themis R.; Schroers, Jan

    2016-01-01

    Metallic alloys are normally composed of multiple constituent elements in order to achieve integration of a plurality of properties required in technological applications. However, conventional alloy development paradigm, by sequential trial-and-error approach, requires completely unrelated strategies to optimize compositions out of a vast phase space, making alloy development time consuming and labor intensive. Here, we challenge the conventional paradigm by proposing a combinatorial strategy that enables parallel screening of a multitude of alloys. Utilizing a typical metallic glass forming alloy system Zr-Cu-Al-Ag as an example, we demonstrate how glass formation and antibacterial activity, two unrelated properties, can be simultaneously characterized and the optimal composition can be efficiently identified. We found that in the Zr-Cu-Al-Ag alloy system fully glassy phase can be obtained in a wide compositional range by co-sputtering, and antibacterial activity is strongly dependent on alloy compositions. Our results indicate that antibacterial activity is sensitive to Cu and Ag while essentially remains unchanged within a wide range of Zr and Al. The proposed strategy not only facilitates development of high-performing alloys, but also provides a tool to unveil the composition dependence of properties in a highly parallel fashion, which helps the development of new materials by design. PMID:27230692

  19. Hot Electron Attenuation Length Measurements of Cu and Ag using BEEM

    NASA Astrophysics Data System (ADS)

    Garramone, John; Abel, Joseph; Sitnitsky, Ilona; Zhao, Lai; Appelbaum, Ian; Labella, Vincent

    2010-03-01

    33.4˜2.9 nm 1.0 eV Understanding electron transport and scattering in nanoscale Cu and Ag structures is important for modern integrated circuit technology and futuristic applications such as spintronics and hydrogen sensing footnotetextHuang et al., Rev. Lett. 99 177209 (2007)^,footnotetextNienhaus et at., Appl. Phys. Lett. 74 4046 (1999). In this study we will report on hot electron attenuation length measurements of nanometer thick films of Cu and Ag on the Si substrate utilizing ballistic electron emission microscopy (BEEM). BEEM is a three terminal scanning tunneling microcopy (STM) based technique where electrons are injected from a STM tip into a grounded metal base of a Schottky diode. The electrons that transverse the metal overlayer and surmount the Schottky barrier are measured as the BEEM current by a backside contact to the semiconductor. The attenuation length is extracted by measuring the falloff in BEEM current as a function of metal film thickness. The hot electron attenuation length for Cu of is measured at a tip bias of and a temperature of 80 K. Results for Ag will also be presented as well as models used to extract the relative contribution of elastic and inelastic electron scattering in the metal films as a function of electron energy.

  20. Hydrothermal ethanol conversion on Ag, Cu, Au/TiO2

    NASA Astrophysics Data System (ADS)

    Mai, Do Tkhyui; Mikhalenko, I. I.; Pylinina, A. I.

    2014-10-01

    The effect UV irradiation and silver, copper, and gold ions (M z+) supported on titania (anatase) have on the activity of M/TiO2 samples in ethanol conversion at 150-400°C is examined. After UV irradiation, the yields of acetaldehyde and ethylene increase for TiO2 and Ag/TiO2 samples, while the activity of Cu2+/TiO2 decreases. The activation energy of ethanol dehydration declines in the order TiO2 > Au3+ > Cu2+ > Ag+ and correlates linearly with a reduction in the radius of M z+ in crystal. The number of acidic sites on a M/TiO2 surface titrated via pyridine adsorption grows upon the introduction of M. Unlike Cu2+/TiO2, these sites are not activated after the irradiation of TiO2, Ag+/TiO2, and Au3+/TiO2. According to IR spectral data on adsorbed pyridine, all samples contain Lewis and Brönsted acidic sites.

  1. Ag 2CuMnO 4: A new silver copper oxide with delafossite structure

    NASA Astrophysics Data System (ADS)

    Muñoz-Rojas, David; Subías, Gloria; Oró-Solé, Judith; Fraxedas, Jordi; Martínez, Benjamín; Casas-Cabanas, Montse; Canales-Vázquez, Jesús; Gonzalez-Calbet, Jose; García-González, Ester; Walton, Richard I.; Casañ-Pastor, Nieves

    2006-12-01

    The use of hydrothermal methods has allowed the synthesis of a new silver copper mixed oxide, Ag 2CuMnO 4, the first example of a quaternary oxide containing both elements. It crystallizes with the delafossite 3 R structure, thus being the first delafossite to contain both Ag and Cu. Synthesis conditions affect the final particle size (30-500 nm). Powder X-ray diffraction Rietveld refinement indicates a trigonal structure (R3¯m) and cell parameters a=2.99991 Å and c=18.428 Å, where Cu and Mn are disordered within the octahedral B positions in the plane and linearly coordinated Ag occupies de A position between layers. X-ray absorption near edge spectroscopy (XANES) for copper and manganese, and XPS for silver evidence +2, +4, and +1 oxidation states. The microstructure consists of layered particles that may form large twins showing 5 nm nanodomains. Finally, magnetic measurements reveal the existence of ferromagnetic coupling yielding in-plane moments that align antiferromagnetically at lower temperatures. The singularity of the new phase resides on the fact that is an example of a bidimensional arrangement of silver and copper in an oxide that also shows clear bidimensionality in its physical properties. That is of special relevance to the field of high Tc superconducting oxides, while the ferromagnetic coupling in a bidimensional system deserves itself special attention.

  2. Origin of the Red Dog Zn-Pb-Ag deposits, Brooks Range, Alaska: Evidence from regional Pb and Sr isotope sources

    USGS Publications Warehouse

    Ayuso, R.A.; Kelley, K.D.; Leach, D.L.; Young, L.E.; Slack, J.F.; Wandless, G.; Lyon, A.M.; Dillingham, J.L.

    2004-01-01

    Pb and Sr isotope data were obtained on the shale-hosted Zn-Pb-Ag Red Dog deposits (Qanaiyaq, Main, Aqqaluk, and Paalaaq), other shale-hosted deposits near Red Dog, and Zn-Pb-Ag sulfide and barite deposits in the western and central Brooks Range. The Red Dog deposits and other shale-hosted Zn-Pb-Ag deposits near Red Dog are hosted in the Mississippian Kuna Formation, which is underlain by a sequence of marine-deltaic clastic rocks of the Upper Devonian to Lower Mississippian Endicott Group. Ag-Pb-Zn vein-breccias are found in the Endicott Group. Galena formed during the main mineralization stages in the Red Dog deposits and from the Anarraaq and Wulik deposits have overlapping Pb isotope compositions in the range 206Pb/204Pb = 18.364 to 18.428, 207Pb/204Pb = 15.553 to 15.621, and 208Pb/204Pb = 38.083 to 38.323. Galena and sphalerite formed during the main ore-forming stages in the Red Dog deposits define a narrow field on standard uranogenic and thorogenic Pb isotope diagrams. Lead in sulfides of the Red Dog district is less radiogenic (238U/204Pb: ?? = 9.51-9.77) than is indicated by the average crustal lead evolution model (?? = 9.74), a difference consistent with a long history of evolution at low ratios of ?? before the Carboniferous. The homogeneous regional isotopic reservoir of Pb may indicate large-scale transport and leaching of minerals with various ?? ratios and Th/Pb ratios. Younger and genetically unrelated fluids did not significantly disturb the isotopic compositions of galena and sphalerite after the main mineralization event in the Red Dog district. Some pyrite shows evidence of minor Pb remobilization. The overall lead isotope homogeneity in the shale-hosted massive sulfide deposits is consistent with three types of control: a homogeneous regional source, mixing of lead during leaching of a thick sedimentary section and fluid transport, or mixing at the site of deposition. Isotopic variability of the hydrothermal fluids, as represented by galena

  3. Interactions of aqueous Cu2+, Zn2+ and Pb2+ ions with crushed concrete fines.

    PubMed

    Coleman, Nichola J; Lee, William E; Slipper, Ian J

    2005-05-20

    The crushing of reclaimed concrete-based demolition waste to produce recycled aggregate gives rise to a large volume of cement-rich fine material for which market development would be beneficial. It was envisaged that this fine fraction may prove to be an effective sorbent for aqueous heavy metal species by virtue of its ion exchangeable phases and high pH. A batch sorption study confirmed that crushed concrete, in the particle size range 1-2 mm, successfully excluded Cu2+ (35 mg g(-1)), Zn2+ (33 mg g(-1)) and Pb2+ (37 mg g(-1)) from aqueous media. Subsequent distilled water leaching of the metal-laden concrete particles indicated that 1.9, 0.9 and 0.2% of the bound metals, Cu2+, Zn2+ and Pb2+, respectively, were readily soluble. Scanning electron microscopy revealed that the removal of Cu2+ and Zn2+ arose from surface precipitation reactions, whereas, the principal mechanism of uptake of Pb2+ was found to be by diffusion into the cement matrix. The metal ion removal efficiency of crushed concrete fines is compared with those of other low cost sorbents and potential applications which may exploit this sorptive property are also discussed. PMID:15885423

  4. Determination of Zn, Pb, Cu, and Hg in soils of Ekpan, Nigeria

    SciTech Connect

    Omgbu, J.A.; Kokogho, M.A. )

    1993-01-01

    The concentrations of zinc, lead, copper, and mercury in solids in Ekpan were determined in order to assess the impact of petroleum-refining activities. Twenty soil samples were collected 100 m apart (10 topsoils 0 to 15 cm and 10 bottom soils 15 to 30 cm). Sample solutions prepared were analyzed using the atomic absorption spectrophotometry technique. Results show that top-soil samples contain as much as 7.13 to 13.10 [mu]g/g Zn, 55.13 to 65.50 [mu]g/g Pb, 3.47 to 5.27 [mu]g/g Cu, and 4.00 to 6.50 [mu]g.g Hg. Bottom soil samples contain as much as 7.17 to 13.77 [mu]g/g Zn, 54.97 to 63.23 [mu]g/g Pb, 3.57 to 6.50 [mu]/g Cu, and 4.57 to 6.63 [mu]g/g Hg. The levels reported had an abundance ratio in the order Pb > Zn > Hg > Cu in the soil samples. It is recommended that appropriate measures be put in place by the companies to treat waste effluent before discharging them to the immediate environment. 8 refs., 2 tabs.

  5. Pb, Cu and Cd distribution in five estuary systems of Marche, central Italy.

    PubMed

    Annibaldi, Anna; Illuminati, Silvia; Truzzi, Cristina; Libani, Giulia; Scarponi, Giuseppe

    2015-07-15

    Heavy metals are subjected to monitoring in estuarine and marine water by the European Union Water Framework Directive, which requires water body health to be achieved by 2021. This is the first survey of heavy metals content in five estuaries of Marche, a region in central Italy. Results showed that total Pb and Cu concentrations decreased by 70-80%, from 1000-2000 to 100-200 ng L(-1) (Pb) and from 2000-3000 to 500-1000 ng L(-1) (Cu) from river to sea. Cd was consistently 20-40 ng L(-1). Dissolved Pb and Cu concentrations declined by 50% and 70% respectively passing from oligohaline to euhaline water, from 150 to 70 ng L(-1) and from 2000-1000 to 600-400 ng L(-1). Cd decreased slightly from ∼20 to ∼10 ng L(-1). Although such concentrations are in the range allowed by the Water Framework Directive, they far exceed (up to 10×) the ground content ceiling set for 2021. PMID:25960271

  6. Sulfuration resistance of five experimental Ag-Pd-Au-Cu alloys with low Pd content of 10 or 12%.

    PubMed

    Saitoh, Setsuo; Araki, Yoshima; Taira, Masayuki

    2006-06-01

    Commercial Ag-based alloy (46Ag-20Pd-12Au-20Cu alloy) is widely used in Japan as a casting alloy. As opposed to the commercial composition, we prepared five experimental Ag-based alloys with reduced Pd content of 10 or 12%, increased Au content of 20 to 30%, and reduced Cu content of 12 to 20%. We then evaluated their sulfuration resistance by analyzing cast specimen surfaces dipped in 0.1% Na2S solution with SEM/EPMA, TF-XRD, and XPS. It became evident that all alloys were susceptible to sulfuration in the segregated Ag-rich Pd-poor phases. The degree and speed of sulfuration, however, differed among the six alloys examined. In particular, one experimental alloy (46Ag-10Pd-30Au-12Cu) possessed a sulfuration resistance equal or superior to that of commercial Ag-based alloy, while the other four experimental alloys were inferior in sulfuration resistance. Based on the results of this study, we concluded that our newly developed 46Ag-10Pd-30Au-12Cu alloy could be employed as a new sulfuration-resistant Ag-based casting alloy--which is especially useful if the price of Pd is skyrocketing again. PMID:16916236

  7. Grain growth behavior of Pb-Cu-Te cable sheathing alloys

    SciTech Connect

    Sahay, S.S.; Guruswamy, S.; Goodwin, F.

    1995-04-01

    Lead alloys are extensively used as sheathing material for power and telecommunication cables. Excellent extrusion properties, high ductility, extremely low recrystallization temperature, good fatigue and creep resistance, make these alloys ideal for cable sheathing application. Though the thickness of the lead sheath is only a few hundred {mu}m, it is a critical component of the cable. The lead layer in the cable is often the limiting factor both during the cable production and during its service phase. Up to several hundred miles of long single piece cables may be required for underground and underwater cables. Cracking in the lead sheath during the cable sheathing extrusion limits the production of such long cables while cracking of the lead sheath due to repeated vibration, creep and recrystallization limits the service life of these cables. The purpose of the present research is to increase the duration of cable extrusion time without compromising sheath integrity by minimizing deleterious precipitate formation and growth. Concentrations of Cu and Te in the commercial alloy are too small to contribute to precipitation strengthening. Therefore their positive influence on mechanical strength should mainly result from the influence of Cu and Te in solution on interdiffusivity and grain boundary mobility. The formation of large precipitates observed in Pb-Cu-Te alloys can be minimized and extrusion times increased without negatively affecting mechanical properties if the solute content is reduced to near solid solubility levels. In order to examine the effect of lowering solute content on microstructural stability and mechanical properties, compressive stress-strain behavior of a Pb-50 wt ppm Cu-100 wt ppm Te alloy with solute contents close to the solubility limits and a Pb-400 wt ppm Cu-400 wt ppm Te alloy was examined at room temperature. The grain growth kinetics in these alloys were studied in a temperature range of 100 to 225 C.

  8. Characterization of Al-Cu-Mg-Ag Alloy RX226-T8 Plate

    NASA Technical Reports Server (NTRS)

    Lach, Cynthia L.; Domack, Marcia S.

    2003-01-01

    Aluminum-copper-magnesium-silver (Al-Cu-Mg-Ag) alloys that were developed for thermal stability also offer attractive ambient temperature strength-toughness combinations, and therefore, can be considered for a broad range of airframe structural applications. The current study evaluated Al-Cu-Mg-Ag alloy RX226-T8 in plate gages and compared performance with sheet gage alloys of similar composition. Uniaxial tensile properties, plane strain initiation fracture toughness, and plane stress tearing resistance of RX226-T8 were examined at ambient temperature as a function of orientation and thickness location in the plate. Properties were measured near the surface and at the mid-plane of the plate. Tensile strengths were essentially isotropic, with variations in yield and ultimate tensile strengths of less than 2% as a function of orientation and through-thickness location. However, ductility varied by more than 15% with orientation. Fracture toughness was generally higher at the mid-plane and greater for the L-T orientation, although the differences were small near the surface of the plate. Metallurgical analysis indicated that the microstructure was primarily recrystallized with weak texture and was uniform through the plate with the exception of a fine-grained layer near the surface of the plate. Scanning electron microscope analysis revealed Al-Cu-Mg second phase particles which varied in composition and were primarily located on grain boundaries parallel to the rolling direction. Fractography of toughness specimens for both plate locations and orientations revealed that fracture occurred predominantly by transgranular microvoid coalescence. Introduction High-strength, low-density Al-Cu-Mg-Ag alloys were initially developed to replace conventional 2000 (Al-Cu-Mg) and 7000 (Al-Zn-Cu-Mg) series aluminum alloys for aircraft structural applications [1]. During the High Speed Civil Transport (HSCT) program, improvements in thermal stability were demonstrated for candidate

  9. Influence of alloying effect on X-ray fluorescence parameters of Co and Cu in CoCuAg alloy films

    NASA Astrophysics Data System (ADS)

    Aylikci, Nuray Kup; Tiraşoğlu, Engin; Apaydin, Gökhan; Cengiz, Erhan; Aylikci, Volkan; Bakkaloğlu, Ömer Faruk

    2009-06-01

    In this study, K β/K α X-ray intensity ratios, σ, σ production cross-sections and ωK fluorescence yields of Co and Cu and L β/L α X-ray intensity ratios, σ, σ production cross-sections and ϖ average fluorescence yields of Ag in pure metals and in different alloy compositions were measured. In this study, alloying effects on the σ production cross-sections of Co and Cu were investigated and changes interpreted according to the rearrangement of valance state electrons and the charge transfer process between the 3d elements (Co and Cu) and Ag.

  10. Alkali-deficient tourmaline from the Sullivan Pb-Zn-Ag deposit, British Columbia

    USGS Publications Warehouse

    Jiang, S.-Y.; Palmer, M.R.; Slack, J.F.

    1997-01-01

    Alkali-deficient tourmalines are found in albitized rocks from the hanging-wall of the Sullivan Pb-Zn-Ag deposit (British Columbia, Canada). They approximate the Mg-equivalent of foitite with an idealized formula D???(Mg2Al)Al6Si6O18(BO 3)3(OH)4. Major chemical substitutions in the tourmalines are the alkali-defect type [Na*(x) + Mg*(Y) = ???(X) + Al(Y)] and the uvite type [Na*(X) + Al(Y) = Ca(X) + Mg*(Y)], where Na* = Na + K, Mg* = Mg + Fe + Mn. The occurrence of these alkali-deficient tourmalines reflects a unique geochemical environment that is either alkali-depleted overall or one in which the alkalis preferentially partitioned into coexisting minerals (e.g. albite). Some of the alkali-deficient tourmalines have unusually high Mn contents (up to 1.5 wt.% MnO) compared to other Sullivan tourmalines. Manganese has a strong preference for incorporation into coexisting garnet and carbonate at Sullivan, thus many tourmalines in Mn-rich rocks are poor in Mn (<0.2 wt.% MnO). It appears that the dominant controls over the occurrence of Mn-rich tourmalines at Sullivan are the local availability of Mn and the lack of other coexisting minerals that may preferentially incorporate Mn into their structures.

  11. Formation of recent Pb-Ag-Au mineralization by potential sub-surface microbial activity

    NASA Astrophysics Data System (ADS)

    Tornos, Fernando; Velasco, Francisco; Menor-Salván, César; Delgado, Antonio; Slack, John F.; Escobar, Juan Manuel

    2014-08-01

    Las Cruces is a base-metal deposit in the Iberian Pyrite Belt, one of the world’s best-known ore provinces. Here we report the occurrence of major Pb-Ag-Au mineralization resulting from recent sub-surface replacement of supergene oxyhydroxides by carbonate and sulphide minerals. This is probably the largest documented occurrence of recent microbial activity producing an ore assemblage previously unknown in supergene mineralizing environments. The presence of microbial features in the sulphides suggests that these may be the first-described natural bacteriomorphs of galena. The low δ13C values of the carbonate minerals indicate formation by deep anaerobic microbial processes. Sulphur isotope values of sulphides are interpreted here as reflecting microbial reduction in a system impoverished in sulphate. We suggest that biogenic activity has produced around 3.1 × 109 moles of reduced sulphur and 1010 moles of CO2, promoting the formation of ca. 1.19 Mt of carbonates, 114,000 t of galena, 638 t of silver sulphides and 6.5 t of gold.

  12. Formation of recent Pb-Ag-Au mineralization by potential sub-surface microbial activity.

    PubMed

    Tornos, Fernando; Velasco, Francisco; Menor-Salván, César; Delgado, Antonio; Slack, John F; Escobar, Juan Manuel

    2014-01-01

    Las Cruces is a base-metal deposit in the Iberian Pyrite Belt, one of the world's best-known ore provinces. Here we report the occurrence of major Pb-Ag-Au mineralization resulting from recent sub-surface replacement of supergene oxyhydroxides by carbonate and sulphide minerals. This is probably the largest documented occurrence of recent microbial activity producing an ore assemblage previously unknown in supergene mineralizing environments. The presence of microbial features in the sulphides suggests that these may be the first-described natural bacteriomorphs of galena. The low δ(13)C values of the carbonate minerals indicate formation by deep anaerobic microbial processes. Sulphur isotope values of sulphides are interpreted here as reflecting microbial reduction in a system impoverished in sulphate. We suggest that biogenic activity has produced around 3.1 × 10(9) moles of reduced sulphur and 10(10) moles of CO2, promoting the formation of ca. 1.19 Mt of carbonates, 114,000 t of galena, 638 t of silver sulphides and 6.5 t of gold. PMID:25098677

  13. Superconducting properties of multilayered Ag/Bi(Pb)-2223 tapes prepared using pretextured monolayered tapes

    NASA Astrophysics Data System (ADS)

    Syamaprasad, U.; Sarma, M. S.; Guruswamy, P.; Pillai, S. G. K.; Warrier, K. G. K.; Damodaran, A. D.

    1997-02-01

    Multilayered Ag/Bi(Pb)-2223 tapes with high critical current densities 0953-2048/10/2/005/img1 have been fabricated using partially heat treated, textured monolayered tapes. Cut sections of the monolayered tapes have been stacked one over the other and folded together using high-purity silver foil and further rolled and heat treated to obtain multilayered tapes of different thickness with an HTS layer thickness varying from 9 to 0953-2048/10/2/005/img2. A comparison of the superconducting properties of the multilayered tapes with those of monolayered tapes prepared under identical heat treatment conditions shows that the 0953-2048/10/2/005/img3 ratio at 77 K is as high as 0.57. The ratio is found to decrease with a decrease in the HTS core thickness of the multilayered tapes. XRD studies of `banana peeled' samples show that the monolayered tapes at the folding stage acquire a good degree of texturing. The relatively high value of the 0953-2048/10/2/005/img3 ratio obtained in the present case compared with those reported by the existing techniques is attributed to the use of pretextured monolayered tapes.

  14. Feruvite from the Sullivan Pb-Zn-Ag deposit, British Columbia

    USGS Publications Warehouse

    Jiang, S.-Y.; Palmer, M.R.; McDonald, A.M.; Slack, J.F.; Leitch, C.H.B.

    1996-01-01

    Feruvite, an uncommon Ca- and Fe2+-rich tourmaline species, has been discovered in the footwall of the Sullivan Pb-Zn-Ag deposit (British Columbia) near gabbro sills and dikes. Its chemical composition varies according to occurrence: feruvite from the shallow footwall has lower Ca, higher Al, and higher X-site vacancies than that from the deep footwall. The major chemical substitution involved in the feruvite is the exchange vector CaMgO???-1Al-1(OH)-1. The most important factor controlling feruvite formation at Sullivan is likely the reaction of Fe-rich hydrothermal fluids with Ca-rich minerals in gabbro and host rocks. This reaction led to the breakdown of Ca-rich minerals (plagioclase and hornblende), with release of Ca to solution and its incorporation into feruvite. This process probably postdated the main stages of formation of fine-grained, intermediate schorl-dravite in the tourmalinite pipe in the footwall, and is attributed to postore intrusion of gabbro and associated albite-chlorite-pyrite alteration.

  15. Thermoelectric Inhomogeneities in (Ag(sub 1-y)SbTe2)(sub x)(PbTe)(sub 1-x)

    NASA Technical Reports Server (NTRS)

    Snyder, G. Jeffrey; Chen, Nancy; Gascoin, Franck; Mueller, Eckhard; Karpinski, Gabriele; Stiewe, Christian

    2006-01-01

    A document presents a study of why materials of composition (Ag1 ySbTe2)0.05 (PbTe)0.95 [0< or = y < or = 1] were previously reported to have values of the thermoelectric figure of merit [ZT (where Z = alpha(sup 2)/rk, alpha is the Seebeck coefficient, r is electrical resistivity, k is thermal conductivity, and T is absolute temperature)] ranging from <1 to >2. In the study, samples of (AgSbTe2)0.05(PbTe)0.95, (Ag0.67SbTe2)0.05 (PbTe)0.95, and (Ag0.55SbTe2)0.05(PbTe)0.95 were prepared by melting followed, variously, by slow or rapid cooling. Analyses of these samples by x-ray diffraction, electron microscopy, and scanning-microprobe measurements of the Seebeck coefficient led to the conclusion that these materials have a multiphase character on a scale of the order of millimeters, even though they appear homogeneous in x-ray diffraction and electron microscopy. The Seebeck measurements showed significant variations, including both n-type and p-type behavior in the same sample. These variations were found to be consistent with observed variations of ZT. The rapidly quenched samples were found to be less inhomogeneous than were the furnace-cooled ones; hence, rapid quenching was suggested as a basis of research on synthesizing more nearly uniform high-ZT samples.

  16. A systematic study of superconductivity in BiPb(Sn)-Sb Sr-Ca-Cu-O systems

    NASA Technical Reports Server (NTRS)

    Akbar, Sheikh A.; Botelho, M. J.; Wong, M. S.; Alauddin, M.

    1990-01-01

    Superconducting transition above 160 K has been reported in the Bi-Pb-Sb-Sr-Ca-Cu-O system. Results of a systematic study emphasizing the correlations between the type and amount of dopant, and superconducting transition is presented. The effect of Sn (instead of Pb) substitution is also highlighted.

  17. Influence of IMC in the Semisolid Behaviour of an Eutectic Sn-Pb/Cu Slurry

    SciTech Connect

    Merizalde, Carlos; Cabrera, Jose-Maria; Prado, Jose-Manuel

    2007-04-07

    A mixture of a liquid Sn-Pb alloy reinforced with solid Cu particles has been found to show thixotropic and pseudoplastic behaviour. The presence of an intermetallic compound (IMC) between the Cu particles and the molten matrix has some very important consequences in the rheological behaviour of the slurry. The semisolid material is obtained mixing a sufficient amount of Cu particles with a liquid eutectic Sn-Pb alloy by mechanical stirring at a given temperature and time. The intermetallic compound is formed from the reaction of solid Cu and liquid Sn. This reaction results in some displacement in the phase diagram, affecting the liquid alloy composition, moving the liquidus temperature and therefore altering the balance of %wt solid- %wt liquid necessary to obtain the best thixotropic behaviour. In this work a model of the solid fraction of the slurry taking into account the IMC growth rate is presented. This model is also used to predict the processing window under which the material keeps the thixotropic behaviour.

  18. Graphene-like Networks in the lattice of Ag, Cu and Al metals

    NASA Astrophysics Data System (ADS)

    Salamanca-Riba, Lourdes; Ge, Xiaoxiao; Isaacs, Romaine; Jaim, Hm Iftekar; Wuttig, Manfred; Rashkeev, Sergey; Kuklja, Maija; Hu, Lianbing; Covetics Team Team

    Graphene-like networks form in the lattice of metals such as silver, copper and aluminum via an electrocharging assisted process. In this process a high current of >80A is applied to the liquid metal containing particles of activated carbon. The resulting material is called M covetic (M =Al, Ag Cu). We have previously reported that this process gives rise to carbon nanostructures with sp2 bonding embedded in the lattice of the metal. The carbon bonds to the metal as evidenced by Raman scattering and first principles simulation of the phonon density of states. With this process we have observed that graphene nanoribbons form along preferential crystalline directions and form 3D epitaxial structures with Al and Ag hosts. Bulk Cu covetic was used to deposit films by e-beam deposition and PLD. The PLD films contain higher C content and show higher transmittance (~90%) and resistance to oxidation than pure copper films of the same thickness. We compare the electrical and mechanical properties of covetics containing C in the 0 to 10 wt % and the transmittance of Cu covetic films compared to pure Cu films of the same thickness. Supported by ONR Grant N000141410042

  19. Cu induced morphology changes at Pb/Si (1 1 1) interface: Separation of “5 × 5”-Cu structure into individual domains

    NASA Astrophysics Data System (ADS)

    Shukrynau, Pavel; Mutombo, Pingo; Hietschold, Michael; Cháb, Vladimír

    2013-04-01

    The adsorption of small amount of Cu onto 1 × 1-Pb/Si (1 1 1) and √3 × √3R30°-Pb/Si (1 1 1) coexisting phases was studied with variable temperature scanning tunnelling microscopy and spectroscopy. The most significant features connected with the deposition of copper at room temperature appeared as tiny clusters randomly scattered over smooth 1 × 1-Pb islands. Behaviour of the clusters at room at low temperature assumed that Cu penetrates through inert 1 × 1-Pb layer and mixes up with silicon. Moderate thermal treatment of (Cu, Pb)/Si (1 1 1) system induced the formation of shallow depressions of variable shape and size that are embedded into 1 × 1-Pb phase. Tunnelling spectra taken over a particular depression showed the peaks typical for the copper silicides. Moreover, the temperature rise causes the formation of large objects of distinctive hexagonal shape on neighbouring √3 × √3R30°-Pb/Si (1 1 1) structure. Filled and empty state STM images of the hexagons differ strongly suggesting covalent bonding between constituent atoms. Detailed analysis of the hexagonal objects (and their agglomerates) reveals the specific features of quasi-commensurate 5 × 5-Cu structure.

  20. Optical behavior and structural property of CuAlS₂ and AgAlS₂ wide-bandgap chalcopyrites.

    PubMed

    Ho, Ching-Hwa; Pan, Chia-Chi

    2014-08-01

    Single crystals of CuAlS₂ and AgAlS₂ were grown by chemical vapor transport method using ICl₃ as the transport. The as-grown CuAlS₂ crystals reveal transparent and light-green color. Most of them possess a well-defined (112) surface. The AgAlS₂ crystals essentially show transparent and white color in vacuum. As the AgAlS₂ was put into the atmosphere, the crystal surface gradually darkened and became brownish because of the surface reaction with humidity or hydrogen gas. After a long-term chemical reaction process, the AgAlS₂ will transform into a AgAlO₂ oxide with yellow color. From x-ray diffraction measurements, both CuAlS₂ and AgAlS₂ as-grown crystals show single-phase and isostructural to a chalcopyrite structure. The (112) face is more preferable for the formation of the chalcopyrite crystals. The energies of interband transitions of the CuAlS₂ and AgAlS₂ were determined accurately by thermoreflectance measurements in a wide energy range of 2-6 eV. The valence-band electronic structures of CuAlS₂ and AgAlS₂ have been detailed and characterized using polarized-thermoreflectance measurements in the temperature range between 30 and 300 K. The band-edge transitions belonging to the E(∥) and E(⊥) polarizations have been, respectively, identified. The band edge of AgAlS₂ is near 3.2 eV while that of AgAlS₂ is about 3.5 eV. On the basis of the experimental analyses, optical and sensing behaviors of the chalcopyrite crystals have been realized. PMID:25090358

  1. One-pot synthesis of Ag nanoparticle-coated Pb-based glass frit used in crystalline silicon solar cell

    NASA Astrophysics Data System (ADS)

    Zhou, Jian; Gan, Weiping; Tang, Hongbo; Li, Yingfen; Yang, Chao

    2015-03-01

    Deposition of Ag nanoparticles onto the surface of commercial Pb-based glass frit was conducted via a novel and facile one-pot procedure—a modified polyol process. The procedure included two steps: a 5-min pretreatment of the glass frit at 25 °C in a sonication bath and a 1-h electroless plating at 75 °C in a water bath, which only involved AgNO3 and ethylene glycol but without stabilizing agent. The silver-coated glass frit particles were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, inductively coupled plasma emission spectrometer and energy dispersive spectroscopy. It was found that the glass frit particles were homogeneously coated with dense crystalline Ag nanoparticles with an average diameter of 15 nm on the surfaces. Electrical performance of the solar cells was improved after the deposition.

  2. Crystalline style and tissue redistribution in Perna viridis as indicators of Cu and Pb bioavailabilities and contamination in coastal waters.

    PubMed

    Yap, C K; Ismail, A; Cheng, W H; Tan, S G

    2006-03-01

    The concentrations of Cu, Pb, and Zn in the crystalline style (CS) and in the remaining soft tissues (ST) of the green-lipped mussel Perna viridis from 10 geographical sites along the coastal waters off peninsular Malaysia were determined. The CS, compared with the remaining ST, accumulated higher levels of Cu in both contaminated and uncontaminated samples, indicating that the style has a higher affinity for the essential Cu to bind with metallothioneins. The similar pattern of Cu accumulation in the different ST of mussels collected from clean and Cu-contaminated sites indicated that the detoxification capacity of the metallothioneins had not been overloaded. For Pb, higher levels of the metal in the CS than in the remaining ST were found only in mussels collected from a contaminated site at Kg. Pasir Puteh. This indicated a tissue redistribution of Pb due to its binding to metallothioneins for Pb detoxification and the potential of the CS as an indicator organ of Pb bioavailability and contamination. For Zn, the above two phenomena were not found since no obvious patterns were observed (lower levels of Zn in the CS than in the remaining ST) in contaminated and uncontaminated samples due to the mechanism of partial regulation. Generally, all the different STs studied (foot, mantle, gonad, CS, gill, muscle, and byssus) are good biomonitoring tissues for Cu and Pb bioavailabilities and contamination. Among these organs, the CS was found to be the best organ for biomonitoring Cu. The present data also suggest the use of the tissue redistribution of Pb in P. viridis as an indicator of Pb bioavailability and contamination in coastal waters. PMID:16406592

  3. Spectral analysis of Cu(2+): B(2)O(3)--ZnO--PbO glasses.

    PubMed

    Lakshminarayana, G; Buddhudu, S

    2005-11-01

    A new series of heavy metal oxide (PbO) based zinc borate glasses in the chemical composition of (95-x)B(2)O(3)-5ZnO-xPbO (x=10, 15, 20, 25, 30, 35, 40, 45 and 50 mol%) have been prepared to verify their UV filtering performance. Both direct and indirect optical band gaps (E(opt)) have been evaluated for these glasses. For a reference glass of 45B(2)O(3)-5ZnO-50PbO, refractive indices at different wavelengths are measured and found the results satisfactorily correlated with the theoretical data upon the computation of Cauchy's constants of A=1.766029949, B=159531.024 nm(2) and C=-1.078 x 10(10) nm(4). Measurements concerning X-ray diffraction (XRD), FT-IR, differential scanning colorimeter (DSC) profiles have been carried out for this glass. The FT-IR profile has revealed that the glass has both BO(3) and BO(4) units. From DSC thermogram, glass transition temperature (T(g)), crystallization temperature (T(c)) and melting temperature (T(m)) have been located and from them, other related parameters of the glass have also been calculated. Visible absorption spectra of 45B(2)O(3)-5ZnO-(50-x)PbO-xCuO (x=0. 1, 0.2, 0.5 and 1.0 mol%) have revealed two absorption bands at around 400 nm ((2)B(1g)-->(2)E(g)) and 780 nm ((2)B(1g)-->(2)B(2g)) of Cu(2+) ions, respectively. Emission bands at 422 and 512 nm are found for the 1 mol % CuO doped glass with excitations at 306 and 332 nm. PMID:16257737

  4. Quasi-Instantaneous Bacterial Inactivation on Cu-Ag Nanoparticulate 3D Catheters in the Dark and Under Light: Mechanism and Dynamics.

    PubMed

    Rtimi, Sami; Sanjines, Rosendo; Pulgarin, Cesar; Kiwi, John

    2016-01-13

    The first evidence for Cu-Ag (50%/50%) nanoparticulate hybrid coatings is presented leading to a complete and almost instantaneous bacterial inactivation in the dark (≤5 min). Dark bacterial inactivation times on Cu-Ag (50%/50%) were observed to coincide with the times required by actinic light irradiation. This provides the evidence that the bimetal Cu-Ag driven inactivation predominates over a CuO/Cu2O and Ag2O oxides inducing a semiconductor driven behavior. Cu- or Ag-coated polyurethane (PU) catheters led to bacterial inactivation needing about ∼30 min. The accelerated bacterial inactivation by Cu-Ag coated on 3D catheters sputtered was investigated in a detailed way. The release of Cu/Ag ions during bacterial inactivation was followed by inductively coupled plasma mass-spectrometry (ICP-MS) and the amount of Cu and Ag-ions released were below the cytotoxicity levels permitted by the sanitary regulations. By stereomicroscopy the amount of live/dead cells were followed during the bacterial inactivation time. By Fourier transform infrared spectroscopy (FTIR), the systematic shift of the -(CH2) band stretching of the outer lipo-polysaccharide bilayer (LPS) was followed to monitor the changes leading to cell lysis. A hydrophobic to hydrophilic transformation of the Cu-Ag PU catheter surface under light was observed within 30 min followed concomitantly to a longer back transformation to the hydrophobic initial state in the dark. Physical insight is provided for the superior performance of Cu-Ag films compared to Cu or Ag films in view of the drastic acceleration of the bacterial inactivation observed on bimetal Cu-Ag films coating PU catheters. A mechanism of bacterial inactivation is suggested that is consistent with the findings reported in this study. PMID:26699928

  5. Anodic behavior of carbon supported Cu@Ag core-shell nanocatalysts in direct borohydride fuel cells

    NASA Astrophysics Data System (ADS)

    Duan, Donghong; Liu, Huihong; You, Xiu; Wei, Huikai; Liu, Shibin

    2015-10-01

    Carbon-supported Cu@Ag core-shell nanoparticles are prepared by a successive reduction method in an aqueous solution and are used as an anode electrocatalyst for the direct borohydride-hydrogen peroxide fuel cell (DBHFC). The physical and electrochemical properties of the as-prepared electrocatalysts are investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), cyclic voltammetry (CV), chronopotentiometry (CP), and fuel cell tests. In situ Fourier transform infrared (FTIR) spectroscopy is employed in 2 M NaOH/0.1 M NaBH4 to understand the borohydride oxidation reaction (BOR) mechanism by studying the intermediate reactions occurring on the Cu@Ag/C electrode. The TEM images show that the average size of the Cu1@Ag1/C particles is approximately 18 nm. Among the as-prepared catalysts, the Cu2@Ag1/C catalyst presents the highest catalytic activity. As shown by in situ FTIR, the oxidation reaction mechanism of BH4- is similar to that of Ag/C: BHn(OH)4-n- + 2OH- → BHn-1(OH)5-n- +H2 O + 2e . At 25 °C, the DBHFC with Cu2@Ag1/C as the anode electrocatalyst and Pt mesh (1 cm2) as the cathode electrode exhibits a maximum anodic power density of 17.27 mW mg-1 at a discharge current density of 27.8 mA mg-1.

  6. Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review.

    PubMed

    Kumpiene, Jurate; Lagerkvist, Anders; Maurice, Christian

    2008-01-01

    The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility. The technique can be used in in situ and ex situ applications to reclaim and re-vegetate industrially devastated areas and mine-spoils, improve soil quality and reduce contaminant mobility by stabilizing agents and a beneficial use of industrial by-products. This study is an overview of data published during the last five years on the immobilization of one metalloid, As, and four heavy metals, Cr, Cu, Pb and Zn, in soils. The most extensively studied amendments for As immobilization are Fe containing materials. The immobilization of As occurs through adsorption on Fe oxides by replacing the surface hydroxyl groups with the As ions, as well as by the formation of amorphous Fe(III) arsenates and/or insoluble secondary oxidation minerals. Cr stabilization mainly deals with Cr reduction from its toxic and mobile hexavalent form Cr(VI) to stable in natural environments Cr(III). The reduction is accelerated in soil by the presence of organic matter and divalent iron. Clays, carbonates, phosphates and Fe oxides were the common amendments tested for Cu immobilization. The suggested mechanisms of Cu retention were precipitation of Cu carbonates and oxy-hydroxides, ion exchange and formation of ternary cation-anion complexes on the surface of Fe and Al oxy-hydroxides. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments, which reduce the Pb mobility by ionic exchange and precipitation of pyromorphite-type minerals. Zn can be successfully immobilized in soil by phosphorus amendments and clays

  7. Decrease and increase profile of Cu, Cr and Pb during stable phase of removal by duckweed (Lemna minor L.).

    PubMed

    Uçüncü, Esra; Tunca, Evren; Fikirdeşici, Seyda; Altindağ, Ahmet

    2013-01-01

    The present work details the decrease-increase profiles of Cu, Cr, and Pb by the aquatic plant Lemna minor. A mixture of these metals were utilized at different concentrations. Removal profiles of each metal was determined with water samples taken every 24 h for a 144 h period after the 48 h mark and was examined with correlation analysis. Removal profiles of Cr and Pb by L. minor from the mixture were observed to be highly similar with each other (r = 0.943). High proportion of Cr and Pb were removed compared to Cu and removal equations were defined with the aid of regression analysis. PMID:23488003

  8. Phase constitution and interface structure of nano-sized Ag-Cu/AlN multilayers: Experiment and ab initio modeling

    SciTech Connect

    Pigozzi, Giancarlo; Janczak-Rusch, Jolanta; Passerone, Daniele; Antonio Pignedoli, Carlo; Patscheider, Joerg; Jeurgens, Lars P. H.; Antusek, Andrej; Parlinska-Wojtan, Magdalena; Bissig, Vinzenz

    2012-10-29

    Nano-sized Ag-Cu{sub 8nm}/AlN{sub 10nm} multilayers were deposited by reactive DC sputtering on {alpha}-Al{sub 2}O{sub 3}(0001) substrates. Investigation of the phase constitution and interface structure of the multilayers evidences a phase separation of the alloy sublayers into nanosized grains of Ag and Cu. The interfaces between the Ag grains and the quasi-single-crystalline AlN sublayers are semi-coherent, whereas the corresponding Cu/AlN interfaces are incoherent. The orientation relationship between Ag and AlN is constant throughout the entire multilayer stack. These observations are consistent with atomistic models of the interfaces as obtained by ab initio calculations.

  9. Bidirectional threshold switching in engineered multilayer (Cu{sub 2}O/Ag:Cu{sub 2}O/Cu{sub 2}O) stack for cross-point selector application

    SciTech Connect

    Song, Jeonghwan; Prakash, Amit; Lee, Daeseok; Woo, Jiyong; Cha, Euijun; Lee, Sangheon; Hwang, Hyunsang

    2015-09-14

    In this study, we achieved bidirectional threshold switching (TS) for selector applications in a Ag-Cu{sub 2}O-based programmable-metallization-cell device by engineering the stack wherein Ag was intentionally incorporated in the oxide (Cu{sub 2}O) layer by a simple approach comprising co-sputtering and subsequent optimized annealing. The distribution of the Ag was directly confirmed by transmission electron microscopy and energy dispersive spectroscopy line profiling. The observed TS occurred because of the spontaneous self-rupturing of the unstable Ag filament that formed in the oxide layer.

  10. Intermetallic compounds formed at the interface between Cu substrate and an Sn-9Zn-0.5Ag lead-free solder

    SciTech Connect

    Chang, T.-C.; Hon, M.-H.; Wang, M.-C

    2003-04-30

    The intermetallic compounds (IMCs) formed at the interface between Cu substrate and an Sn-9Zn-0.5Ag lead-free solder alloy have been investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and electron diffraction (ED). The XRD patterns show that the main IMCs formed at the interface of Sn-9Zn-0.5Ag/Cu are {gamma}-Cu{sub 5}Zn{sub 8} and {eta}'-Cu{sub 6}Sn{sub 5}. The Ag{sub 3}Sn IMC with orthorhombic structure was also observed at the Sn-9Zn-0.5Ag/Cu interface by TEM and ED analyses. The interfacial adhesion strength between the Cu substrate and Sn-9Zn-0.5Ag lead-free solder alloy is higher than that of the Sn-9Zn alloy due to the formation of Ag{sub 3}Sn IMC at the interface.

  11. Bactericidal effect of graphene oxide/Cu/Ag nanoderivatives against Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus aureus and Methicillin-resistant Staphylococcus aureus.

    PubMed

    Jankauskaitė, V; Vitkauskienė, A; Lazauskas, A; Baltrusaitis, J; Prosyčevas, I; Andrulevičius, M

    2016-09-10

    A systematic analysis of antibacterial activity of individual nanoderivatives, e.g. GO nanosheets, Ag and Cu nanoparticles (NPs), as well as combinations of Cu-Ag NPs, and GO-Cu-Ag nanocomposites against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Klebsiella pneumoniae and Methicillin-resistant Staphylococcus aureus (MRSA) was performed. Chemical properties of the GO, Cu and Ag NPs were determined employing X-ray photoelectron spectroscopy and X-Ray-excited Auger electron spectroscopy. Morphology of corresponding nanoderivatives was studied employing transmission electron microscopy and scanning electron microscopy. It was shown that combination of Cu and Ag NPs, as well as GO-Cu-Ag nanocomposite material possess enhanced antibacterial activity through a possible synergy between multiple toxicity mechanisms. MRSA showed highest resistance in all cases. PMID:27370911

  12. Bonding of Cf/SiC composite to Invar alloy using an active cement, Ag-Cu eutectic and Cu interlayer

    NASA Astrophysics Data System (ADS)

    Lei, Zhao; Xiaohong, Li; Jinbao, Hou; Qiang, Sun; Fuli, Zhang

    2012-10-01

    The interfacial microstructures and mechanical properties of the joints formed by active cement added brazing in vacuum of Cf/SiC composite to Invar alloy, using Ag-Cu eutectic alloy and pure copper foil as braze alloy and interlayer respectively, were investigated. CuTi, Cu4Ti3, Fe2Ti and the reaction layer of TiC and Si were the predominant components at the joint interface. The maximum shear strength of the joint was 77 MPa for brazing at 850 °C for 15 min. The results show that active cement added brazing in vacuum using Ag-Cu eutectic alloy and Cu interlayer can be used successfully for joining Cf/SiC composites to Invar alloy.

  13. Geology and origin of Ag-Pb-Zn deposits occurring in the Ulaan-Jiawula metallogenic province, northeast Asia

    NASA Astrophysics Data System (ADS)

    Nie, Feng-jun; Li, Qiang-feng; Liu, Chun-hua; Ding, Cheng-wu

    2015-01-01

    Located at the conjunction area of China, Mongolia and Russia in NE Asia, the Ulaan-Jiawula (also referred as UJ) region, with an area of 400,000 km2, is one of the most important Ag-Pb-Zn, U, Sn, W, Nb-Ta, and Au metallogenic provinces in Asia. At present, 2126 deposits and showings including 500 Ag-Pb-Zn deposits have been discovered, explored and mined since the late 1960s. These Ag-Pb-Zn occurrences can be subdivided into three types according to their geological setting, texture, alteration and mineral assemblages: (1) low sulfidation epithermal Ag-Pb-Zn deposits; (2) intermediate sulfidation epithermal Ag-Pb-Zn deposits; (3) mixed-type Ag-Pb-Zn deposit consisting of vein-like and tabular ore bodies. The Eren Tologoi and Tsagenbulagen deposits are representative of low-sulphidation type Ag-Pb-Zn mineralization in the UJ region, and are associated with intensive adularization and sericitization. Ore occurs as mineralized quartz veins, veinlet groups and altered-fracture zones within Mesozoic alkaline and high-K calc-alkaline volcanic rocks, Ore mineralogy includes native silver, electrum, pyrite, galena, sphalerite, arsenopyrite, pyrargyrite and chalcopyrite. The Tsav and Jiawula deposits are typical of intermediate sulfidation Ag-Pb-Zn mineralization. The δ34S value of sulfide (pyrite and galena) separates from groups 1 and 2 varies from 1.5‰ to 3.5‰ and 2.0‰ to 4.5‰, respectively. The δ34S values of the Mesozoic volcanic host rocks for groups 1 and 2 deposits also show the positive δ34S values of 1.5-4.8‰, while the δ34S value of pyrite separate from the pre-Jurassic schist range from -6‰ to -8‰ which are much lower than Mesozoic volcanic host rocks and their associated ore deposits. There is no difference between the δ34S value of sulfide (pyrite and galena) separates from vein-like ore bodies of the group 3 deposits and their wall rocks, having δ34S value of 1.0-5.0‰ and 1.2-4.5‰ which are similar to that of groups 1 and 2 deposits

  14. Transparent ITO/Ag-Pd-Cu/ITO multilayer cathode use in inverted organic solar cells

    SciTech Connect

    Kim, Hyo-Joong; Kim, Han-Ki; Lee, Hyun Hwi; Kal, Jinha; Hahn, Jungseok

    2015-10-15

    The characteristics of transparent ITO/Ag-Pd-Cu (APC)/ITO multilayer cathodes were investigated for use in inverted organic solar cells (IOSCs). The insertion of an APC interlayer into the ITO film effectively led to crystallization of the top ITO layer, unlike that in the Ag interlayer, and resulted in a low sheet resistance of 6.55 Ohm/square and a high optical transmittance of 84.14% without post annealing. In addition, the alloying of the Pd and Cu elements into Ag prevented agglomeration and oxidization of the metal interlayer and led to more stable ITO/APC/ITO films under ambient conditions. The microstructure and interfacial structure of the transparent ITO/APC/ITO cathode in the IOSCs were examined in detail by synchrotron X-ray scattering and high resolution transmission electron microscopy. Furthermore, we suggested a possible mechanism to explain the lower PCE of the IOSCs with an ITO/APC/ITO cathode than that of a reference IOSC with a crystalline ITO cathode using the external quantum efficiency of the IOSCs.

  15. Transparent ITO/Ag-Pd-Cu/ITO multilayer cathode use in inverted organic solar cells

    NASA Astrophysics Data System (ADS)

    Kim, Hyo-Joong; Lee, Hyun Hwi; Kal, Jinha; Hahn, Jungseok; Kim, Han-Ki

    2015-10-01

    The characteristics of transparent ITO/Ag-Pd-Cu (APC)/ITO multilayer cathodes were investigated for use in inverted organic solar cells (IOSCs). The insertion of an APC interlayer into the ITO film effectively led to crystallization of the top ITO layer, unlike that in the Ag interlayer, and resulted in a low sheet resistance of 6.55 Ohm/square and a high optical transmittance of 84.14% without post annealing. In addition, the alloying of the Pd and Cu elements into Ag prevented agglomeration and oxidization of the metal interlayer and led to more stable ITO/APC/ITO films under ambient conditions. The microstructure and interfacial structure of the transparent ITO/APC/ITO cathode in the IOSCs were examined in detail by synchrotron X-ray scattering and high resolution transmission electron microscopy. Furthermore, we suggested a possible mechanism to explain the lower PCE of the IOSCs with an ITO/APC/ITO cathode than that of a reference IOSC with a crystalline ITO cathode using the external quantum efficiency of the IOSCs.

  16. Mineral chemistry and shrimp U-Pb Geochronology of mesoproterozoic polycrase-titanite veins in the sullivan Pb-Zn-Ag Deposit, British Columbia

    USGS Publications Warehouse

    Slack, J.F.; Aleinikoff, J.N.; Belkin, H.E.; Fanning, C.M.; Ransom, P.W.

    2008-01-01

    Small polycrase-titanite veins 0.1-2 mm thick cut the tourmalinite feeder zone in the deep footwall of the Sullivan Pb-Zn-Ag deposit, southeastern British Columbia. Unaltered, euhedral crystals of polycrase and titanite 50-100 ??m in diameter are variably replaced by a finer-grained alteration-induced assemblage composed of anhedral polycrase and titanite with local calcite, albite, epidote, allanite, and thorite or uranothorite (or both). Average compositions of the unaltered and altered polycrase, as determined by electron-microprobe analysis, are (Y0.38 REE0.49 Th0.10 Ca0.04 Pb0.03 Fe0.01U0.01) (Ti1.48 Nb0.54 W0.04 Ta0.02)O6 and (Y0.42 REE0.32 Th0.15 U0.06 Ca0.04 Pb0.01 Fe0.01) (Ti1.57 Nb0.44 W0.04 Ta0.02)O6, respectively. The unaltered titanite has, in some areas, appreciable F (to 0.15 apfu), Y (to 0.40 apfu), and Nb (to 0.13 apfu). SHRIMP U-Pb geochronology of eight grains of unaltered polycrase yields a weighted 207Pb/206Pb age of 1413 ?? 4 Ma (2??) that is interpreted to be the age of vein formation. This age is 50-60 m.y. younger than the ca. 1470 Ma age of synsedimentary Pb-Zn-Ag mineralization in the Sullivan deposit, which is based on combined geological and geochronological data. SHRIMP ages for altered polycrase and titanite suggest later growth of minerals during the ???1370-1320 Ma East Kootenay and ???1150-1050 Ma Grenvillian orogenies. The 1413 ?? 4 Ma age for the unaltered polycrase in the veins records a previously unrecognized post-ore (1370 Ma) mineralizing event in the Sullivan deposit and vicinity. The SHRIMP U-Pb age of the polycrase and high concentrations of REE, Y, Ti, Nb, and Th in the veins, together with elevated F in titanite and the absence of associated sulfides, suggest transport of these high-field-strength elements (HFSE) by F-rich and S-poor hydrothermal fluids unrelated to the fluids that formed the older Fe-Pb-Zn-Ag sulfide ores of the Sullivan deposit. Fluids containing abundant REE, HFSE, and F may have been derived from a

  17. Photocatalytic comparison of Cu- and Ag-doped TiO2/GF for bioaerosol disinfection under visible light

    NASA Astrophysics Data System (ADS)

    Pham, Thanh-Dong; Lee, Byeong-Kyu

    2015-12-01

    Photocatalysts, TiO2/glass fiber (TiO2/GF), Cu-doped TiO2/glass fiber (Cu-TiO2/GF) and Ag-doped TiO2/glass fiber (Ag-TiO2/GF), were synthesized by a sol-gel method. They were then used to disinfect Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in bioaerosols under visible light irradiation. TiO2/GF did not show any significant disinfection effect. Both Cu and Ag acted as intermediate agents to enhance separation efficiency of electron-hole pairs of TiO2, leading to improved photocatalytic activity of Cu-TiO2/GF and Ag-TiO2/GF under visible light. Cu in Cu-TiO2/GF acted as a defective agent, increasing the internal quantum efficiency of TiO2, while Ag in Ag-TiO2/GF acted as a sensitive agent, enhancing the transfer efficiency of the electrons generated. The highest disinfection efficiencies of E. coli and S. aureus by Cu-TiO2/GF were 84.85% and 65.21%, respectively. The highest disinfection efficiencies of E. coli and S. aureus by Ag-TiO2/GF were 94.46% and 73.12%, respectively. Among three humidity conditions - 40±5% (dry), 60±5% (moderate), and 80±5% (humid) - the moderate humidity condition showed the highest disinfection efficiency for both E. coli and S. aureus. This study also showed that a Gram-negative bacterium (E. coli) were more readily disinfected by the photocatalysts than a Gram-positive bacterium (S. aureus).

  18. Speciation and mobility of Zn, Cu and Pb in a truck farming soil contaminated by sewage irrigation

    NASA Astrophysics Data System (ADS)

    Kirpichtchikova, T.; Manceau, A.; Lanson, B.; Marcus, M. A.; Jacquet, T.

    2003-05-01

    The forrns and mobility of Cu (290 mg/kg), Zn (1103 mg/kg), and Pb (535 mg/kg) in a soil used for intensive truck farining from the Region Ile-de-France, and which has been irrigated for more than a century with sewage water ftom the city of Paris, have been studied by chemical treatments and advanced x-ray techniques. Elemental associations and forms of metals were determined qualitatively and quantitatively by a combination of physical techniques, including μPIXE (Cu, Zn, Pb), μSXRF (Cu, Zn), μEXAFS (Zn) and powder EXAFS (Zn). The nature, number, and relative proportion of Zn species were obtained by principal component analysis and decomposition of Zn K-edge EXAFS spectra. These data collectively indicate that Cu is associated mainly with organic matter, and that Zn and Pb are bound essentially to mineral constituents. Four Zn-containing species were positively identified: Zn-phosphate and phyllosilicate as dominant species, and Zn-Fe oxyhydroxide and willemite (Zn2SiO4) as minor species. Studies are underway to determine the structural forms of Cu and Pb. Depending on the chemical treatment, up to 70% Cu, ~50% Zn, and ~85% Pb can be removed in a few days with citrate and EDTA. Citrate is generally at least as efficient as EDTA, and it has the advantage ofbeing easily biodegradable and, hence, less harmful to ecosystems.

  19. Experimental and theoretical determination of cross sections and rate constants for charge transfer population of some excited Ag+, I+, and Cu+ levels

    NASA Astrophysics Data System (ADS)

    Temelkov, K. A.; Vuchkov, N. K.; Sabotinov, N. V.

    2007-04-01

    Cross-sections and rate constants for thermal energy charge transfer into some Ag+, I+, and Cu+ excited states are theoretically and experimentally obtained for a gas discharge in the He-CuBr, Ne-CuBr, He-AgI, and Ne-AgI mixtures. Besides the pumping process the formation of the inversion population is determined by the radiative transitions, which populate or depopulate the upper and lower laser levels.

  20. Room-Temperature Indentation Creep and the Mechanical Properties of Rapidly Solidified Sn-Sb-Pb-Cu Alloys

    NASA Astrophysics Data System (ADS)

    Kamal, Mustafa; El-Bediwi, A.; Lashin, A. R.; El-Zarka, A. H.

    2016-05-01

    In this paper, we study the room-temperature indentation creep and the mechanical properties of Sn-Sb-Pb-Cu alloys. Rapid solidification from melt using the melt-spinning technique is applied to prepare all the alloys. The experimental results show that the magnitude of the creep displacement increases with the increase in both time and applied load, and the stress exponent increases with the increase in the copper content in the alloys which happens primarily due to the existence of the intermetallic compounds SbSn and Cu6Sn5. The calculated values of the stress exponent are in the range of 2.82 to 5.16, which are in good agreement with the values reported for the Sn-Sb-Pb-Cu alloys. We have also studied and analyzed the structure, elastic modulus, and internal friction of the Sn-Sb-Pb-Cu alloys.

  1. Nano-crystalline Ag-PbTe thermoelectric thin films by a multi-target PLD system

    NASA Astrophysics Data System (ADS)

    Cappelli, E.; Bellucci, A.; Medici, L.; Mezzi, A.; Kaciulis, S.; Fumagalli, F.; Di Fonzo, F.; Trucchi, D. M.

    2015-05-01

    It has been evaluated the ability of ArF pulsed laser ablation to grow nano-crystalline thin films of high temperature PbTe thermoelectric material, and to obtain a uniform and controlled Ag blending, through the entire thickness of the film, using a multi-target system in vacuum. The substrate used was a mirror polished technical alumina slab. The increasing atomic percentage of Ag effect on physical-chemical and electronic properties was evaluated in the range 300-575 K. The stoichiometry and the distribution of the Ag component, over the whole thickness of the samples deposited, have been studied by XPS (X-ray photoelectron spectroscopy) and corresponding depth profiles. The crystallographic structure of the film was analyzed by grazing incidence X-ray diffraction (GI-XRD) system. Scherrer analysis for crystallite size shows the presence of nano-structures, of the order of 30-35 nm. Electrical resistivity of the samples, studied by the four point probe method, as a function of increasing Ag content, shows a typical semi-conductor behavior. From conductivity values, carrier concentration and Seebeck parameter determination, the power factor of deposited films was calculated. Both XPS, Hall mobility and Seebeck analysis seem to indicate a limit value to the Ag solubility of the order of 5%, for thin films of ∼200 nm thickness, deposited at 350 °C. These data resulted to be comparable to theoretical evaluation for thin films but order of magnitude lower than the corresponding bulk materials.

  2. Synthesis, surface and optical properties of Ag2Cu(VO3)4 and Cu(VO3)2 vanadates

    NASA Astrophysics Data System (ADS)

    Qiao, Xuebin; Wan, Yingpeng; Li, Yuze; Qin, Lin; Seo, Hyo Jin

    2016-04-01

    Ag2Cu(VO3)4 and Cu(VO3)2 were prepared via the sol-gel chemical synthesis. The phase formation was confirmed by X-ray powder polycrystalline diffraction (XRD) measurements. The surface properties were measured with the scanning electron microscope (SEM), energy dispersive spectra (EDS), transmission electron microscopy (TEM), and nitrogen adsorption-desorption isotherms. The optical properties and the band-gap structures were investigated. The vanadates have efficient optical absorption in the UV to visible wavelength region with an indirect allowed transition. Ag2Cu(VO3)4 has smaller band gap (1.85 eV) than that of Cu(VO3)2 (2.03 eV). The narrowed band gap is due to the hybridization between the Ag-4d and O-2p in the valence band. The photocatalysis was investigated by photodegradation of methylene blue (MB) solutions excited by the light with wavelength longer than 420 nm. Correspondingly Ag2Cu(VO3)4 has more efficient photocatalytic activity on MB photodegradation than that of Cu(VO3)2. The photocatalytic mechanisms were suggested according to the band positions and the trapping experiments.

  3. Heavy metal concentrations (Cd, Cu and Pb) in five aquatic plant species in Tasik Chini, Malaysia

    NASA Astrophysics Data System (ADS)

    Ebrahimpour, M.; Mushrifah, I.

    2008-04-01

    The purpose of this study was to determine the levels of heavy metals namely cadmium (Cd), copper (Cu) and lead (Pb) in the five aquatic plants. For this purpose, the concentration of heavy metals were measured in water and in the five aquatic plant species, Lepironia articulata, Pandanus helicopus, Scirpus grossus, Cabomba furcata and Nelumbo nucifera, in 15 sites from Tasik Chini. The concentrations were different among the plant species as well as among the parts of plants. The highest concentration of heavy metals among the aquatic plants and plant parts was found in the roots of S. grossus. The concentrations of Cd in the leaves and stems of submerged aquatic plant, C . furcata, were higher than concentration of Cd in the leaves and stems of emergent aquatic plant and floating leaf plant. The concentration of Cu in the stem of C. furcata was greater than that in the leaf, while the concentration of Cd was more in the leaf than in the stem. The heavy metal contents of the aquatic plants were in descending order of Pb > Cu > Cd. The metal concentration quotient of leaves/roots and stems/roots (ML/MR and MS/MR) were calculated. The highest internal translocation was found in P. helicopus, while the lowest internal translocation was found in S. grossus.

  4. Atmospheric deposition of heavy metals (Cu, Zn, Cd and Pb) in Varanasi City, India.

    PubMed

    Sharma, Rajesh Kumar; Agrawal, Madhoolika; Marshall, Fiona M

    2008-07-01

    Rapid growth in urbanization and industrialization in developing countries may significantly contribute in heavy metal contamination of vegetables through atmospheric depositions. In the present study, an assessment was made to investigate the spatial and seasonal variations in deposition rates of heavy metals and its contribution to contamination of palak (Beta vulgaris). Samples of bulk atmospheric deposits and Beta vulgaris for analysis of Cu, Zn, Cd and Pb were collected from different sampling locations differing in traffic density and land use patterns. The results showed that the sampling locations situated in industrial or commercial areas with heavy traffic load showed significantly elevated levels of Cu, Zn and Cd deposition rate as compared to those situated in residential areas with low traffic load. The deposition rates of Cu, Zn and Cd were significantly higher in summer and winter as compared to rainy season, however, Pb deposition rate was significantly higher in rainy and summer seasons as compared to winter season. Atmospheric depositions have significantly elevated the levels of heavy metals in B. vulgaris collected during evening as compared to those collected in morning hours. The study further showed that local population has maximum exposure to Cd contamination through consumption of B. vulgaris. The present study clearly points out the urban and industrial activities of a city have potential to elevate the levels of heavy metals in the atmospheric deposits, which may consequently contaminate the food chain and thus posing health risk to the local population. PMID:17879134

  5. AgCuVO4 : A quasi-one-dimensional S=(1)/(2) chain compound

    NASA Astrophysics Data System (ADS)

    Möller, A.; Schmitt, M.; Schnelle, W.; Förster, T.; Rosner, H.

    2009-09-01

    We present a joint experimental and computational study of the recently synthesized spin 1/2 system silver-copper-orthovanadate AgCuVO4 [A. Möller and J. Jainski, Z. Anorg. Allg. Chem. 634, 1669 (2008)] exhibiting chains of trans corner-sharing [CuO4] plaquettes. The static magnetic susceptibility and specific heat measurements of AgCuVO4 can be described to a good approximation by the Bonner-Fisher spin-chain model with Jintra≈330K . Evidence for a Néel-type of order at ˜2.5K is obtained from the specific heat and corroborated by ESR studies. To independently obtain a microscopically based magnetic model, density functional electronic structure calculations were performed. In good agreement with the experimental data, we find pronounced one-dimensional magnetic exchange along the corner-sharing chains with small interchain couplings. The difference between the experimentally observed and the calculated ordering temperature can be assigned to a sizable interchain frustration derived from the calculations.

  6. Age and tectonic setting of the Bavanat Cu-Zn-Ag Besshi-type volcanogenic massive sulfide deposit, southern Iran

    NASA Astrophysics Data System (ADS)

    Mousivand, Fardin; Rastad, Ebrahim; Meffre, Sebastien; Peter, Jan M.; Mohajjel, Mohammad; Zaw, Khin; Emami, Mohammad Hashem

    2012-12-01

    The Bavanat Cu-Zn-Ag Besshi-type volcanogenic massive sulfide (VMS) deposit occurs within the Surian volcano-sedimentary complex in the Sanandaj-Sirjan zone (SSZ) of southern Iran. The Surian complex is comprised of pelite, sandstone, calcareous shale, basalt, gabbro sills, and thin-bedded limestone. Mineralization occurs as stratiform sheet-like and tabular orebodies hosted mainly by greenschist metamorphosed feldspathic and quartz feldspathic sandstone, basalt, and pelites. The basalts of the Surian complex show predominantly tholeiitic to transitional affinities, with a few samples that are alkalic in composition. Primitive mantle-normalized trace and rare earth element (REE) patterns of the Surian basalts display depletions in light REE, negative anomalies of Nb, Ta, and Ti, and positive anomalies of P. Positive P anomalies are indicative of minor crustal contamination. Furthermore, Th enrichments in the mid-ocean ridge basalt-normalized patterns of the Surian basalts are characteristic of rifted arc basalts emplaced in continental margin subduction zones. The high MgO content (>6 wt.%) of most Surian basalts and low TiO2 content of two samples (0.53 and 0.62 wt.%) are characteristic of boninites. The aforementioned features of the basalts indicate arc tholeiites emplaced in intra-arc rift environments and continental margin subduction zones. U-Pb dating by laser ablation- inductively coupled plasma mass spectrometry of detrital zircons extracted from the host feldspathic and quartz feldspathic sandstone yields various ages that are predominantly Permian and Triassic; however, the youngest zircons give a mean Early Jurassic concordant U-Pb age of 191 ± 12 Ma. This age, together with geological and petrochemical data, indicate that VMS mineralization formed in the Early Jurassic in pull-apart basins within the SSZ. These basins and the VMS mineralization may be temporally related to an intra-arc volcano-plutonic event associated with Neo-Tethyan oblique

  7. Tarnish resistance evaluation of experimental Pd-free Ag-Au-Pt-Cu dental alloys.

    PubMed

    Takuma, Yasuko; Shiraishi, Takanobu; Fujita, Takeshi; Hisatsune, Kunihiro

    2010-05-01

    This study evaluated the tarnish resistance of eight experimental Pd-free Ag-Au-Pt-Cu dental alloys in a 0.1% Na(2)S aqueous solution at 37 degrees C. Color measurements of the plate samples were made using a computerized spectrophotometer before and after immersion in the test solution for up to 72 hours. Tarnish discoloration was evaluated using the color difference vector, DeltaE*, in the CIELAB color space. Microstructural observation of each sample through an optical microscope revealed the matrix phase as the major constituent and second-phase small grains in the matrix phase. Selective tarnish discoloration occurred in the matrix, and fractional area of the matrix to the whole surface area was influenced by the sum of Au and Ag concentrations. The DeltaE* value significantly decreased with increasing Au/(Au+Ag) atomic ratio. In conclusion, the Au/(Au+Ag) ratio in an alloy and the fractional area of the matrix were found to be primary and auxiliary factors affecting the tarnish resistance of the experimental alloys. PMID:20495286

  8. Effect of cooling rate on the microstructure and microhardness of the CuZrAgAl alloy

    SciTech Connect

    Liu, Y.; Blandin, J.J.; Suery, M.; Kapelski, G.

    2012-08-15

    The effect of cooling rate on the microstructure and microhardness of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} (at.%) alloy has been studied. The crystalline phases were characterized by X-ray diffraction, optical microscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy, and identified as AlCu{sub 2}Zr, Cu{sub 10}Zr{sub 7} and CuZr{sub 2}. The solidification sequence was established as following: the Cu{sub 10}Zr{sub 7} phase forms first in the periphery of the rod, then following with AlCu{sub 2}Zr phase in the rod center and finally CuZr{sub 2} crystals in Cu-depleted areas. The effect of crystals on the mechanical properties of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was also estimated through the microhardness. According to the value of microhardness, inhomogeneous structure of the amorphous matrix is more easily formed for the alloy in the low cooling rate (i.e., 9 mm) as compared with the alloy with fully amorphous state in the large cooling rate (i.e., 3 mm). This inhomogeneous structure was attributed to the composition change of amorphous matrix arising from the forming of crystalline phases due to the low cooling rate. - Highlights: Black-Right-Pointing-Pointer The crystalline phases in the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy were identified. Black-Right-Pointing-Pointer The solidification sequence of Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was verified. Black-Right-Pointing-Pointer The softening and hardening of alloy could be observed due to the crystallization.

  9. Reduced Carrier Recombination in PbS - CuInS2 Quantum Dot Solar Cells

    PubMed Central

    Sun, Zhenhua; Sitbon, Gary; Pons, Thomas; Bakulin, Artem A.; Chen, Zhuoying

    2015-01-01

    Energy loss due to carrier recombination is among the major factors limiting the performance of TiO2/PbS colloidal quantum dot (QD) heterojunction solar cells. In this work, enhanced photocurrent is achieved by incorporating another type of hole-transporting QDs, Zn-doped CuInS2 (Zn-CIS) QDs into the PbS QD matrix. Binary QD solar cells exhibit a reduced charge recombination associated with the spatial charge separation between these two types of QDs. A ~30% increase in short-circuit current density and a ~20% increase in power conversion efficiency are observed in binary QD solar cells compared to cells built from PbS QDs only. In agreement with the charge transfer process identified through ultrafast pump/probe spectroscopy between these two QD components, transient photovoltage characteristics of single-component and binary QDs solar cells reveal longer carrier recombination time constants associated with the incorporation of Zn-CIS QDs. This work presents a straightforward, solution-processed method based on the incorporation of another QDs in the PbS QD matrix to control the carrier dynamics in colloidal QD materials and enhance solar cell performance. PMID:26024021

  10. Re-Os isotope evidence for mixed source components in carbonate-replacement Pb-Zn-Ag deposits in the Lavrion district, Attica, Greece

    NASA Astrophysics Data System (ADS)

    Spry, Paul G.; Mathur, Ryan D.; Bonsall, Todd A.; Voudouris, Panagiotis Ch.; Melfos, Vasilios

    2014-08-01

    The Lavrion ore district contains carbonate-replacement and vein-type Pb-Zn-Ag deposits as well as low-grade porphyry Mo, Cu-Fe skarn, and minor breccia-hosted Pb-Zn-Cu sulfide mineralization. These ore types are spatially related to a Late Miocene granodiorite intrusion (7 to 10 Ma), and various sills and dikes of mafic to felsic composition. Samples of sphalerite and pyrite from the Ilarion carbonate replacement deposit, and galena from Vein 80 (vein-type mineralization) in the Adami deposit show heterogeneous Re-Os values. These values were partially disturbed by hydrothermal activity associated with the formation of hydrothermal veins (e.g., Vein 80). A plot of initial 187Os/188Os versus 1/Oscommon ratios for pyrite and sphalerite from the Ilarion deposit form a mixing line (r2 = 0.78) between high concentration crustal-like and low concentration mantle-like end-members, or two crustal end-members one of which was more radiogenic than the other. Based on the Re-Os systematics and previously published geological and geochemical evidence, the most plausible explanation for the Re-Os isotope data is that ore-forming components were derived from mixed sources, one of which was a radiogenic crustal source from schists and carbonates probably near intrusion centers and the other, intrusive rocks in the district that are less radiogenic. Although the Re and Os concentrations of galena from Vein 80 are above background values they cannot be used as a chronometer. However, the results of the current study suggest that although pyrite, sphalerite, and galena are poor geochronometers in this ore deposit, due to partial open-system behavior, they still yield valuable information on the origin of the source rocks in the formation of bedded replacement and vein mineralization in the Lavrion district.

  11. Investigating Quantum Oscillations in the Thermal Coefficient of Resistivity of Ultra-thin Ag Capping Layers on Cu for IC Interconnect Applications

    NASA Astrophysics Data System (ADS)

    Tatem, Elroy

    As the semiconductor industry continues to scale feature sizes, scattering from phonons, surfaces, and grain boundaries result in an increase of metal interconnect resistivity in state-of-the-art integrated circuits (ICs). The interconnect chapter of the 2011 International Technology Roadmap for Semiconductors (ITRS) stated that there are currently no manufacturable solutions in the near term for suitable Cu replacements. Previous studies of thin Ag films deposited on Cu demonstrated oscillations in the electron-phonon interactions within the bilayer system. This thesis investigates oscillations in the resistive properties of the Ag/Cu bilayer system and discusses the applicability of these oscillations to the resistivity challenges facing metal-based IC interconnects. Ag/Cu bilayer films were prepared by physical vapor deposition (PVD). The films were characterized by measuring the electrical resistance of the films at various temperatures and calculating the thermal coefficient of resistance (TCR) for various Ag capping layer thicknesses. Films were further characterized by atomic force microscopy (AFM), Rutherford backscattering (RBS), and scanning electron microscopy (SEM). Patterned Ag-capped Cu lines were fabricated, which exhibited resistive behavior similar to that of the Ag/Cu films. Compared to bare Cu, the resistances of Ag-capped Cu lines and films were lower and exhibited a reduced dependence on temperature. Smaller thermal coefficients of resistivity were also observed for Ag-capped Cu films and patterned lines when compared to Cu alone.

  12. Relationship between morphologies and orientations of Cu{sub 6}Sn{sub 5} grains in Sn3.0Ag0.5Cu solder joints on different Cu pads

    SciTech Connect

    Tian, Yanhong Zhang, Rui; Hang, Chunjin; Niu, Lina; Wang, Chunqing

    2014-02-15

    The morphologies and orientations of Cu{sub 6}Sn{sub 5} intermetallic compounds in the Sn3.0Ag0.5Cu solder joints both on polycrystalline and single crystal Cu pads under different peak reflow temperatures and times above liquids were investigated. The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified. At the interface of Sn3.0Ag0.5Cu/polycrystalline Cu pad, scalloped Cu{sub 6}Sn{sub 5} intermetallic compounds formed at 250 °C and roof shape Cu{sub 6}Sn{sub 5} formed at 300 °C. Both scalloped Cu{sub 6}Sn{sub 5} and roof shape Cu{sub 6}Sn{sub 5} had a preferred orientation of (0001) plane being parallel to polycrystalline Cu pad surface. Besides, the percentage of large angle grain boundaries increased as the peak reflow temperature rose. At the interface of Sn3.0Ag0.5Cu/(111) single crystal Cu pad, the Cu{sub 6}Sn{sub 5} intermetallic compounds were mainly scallop-type at 250 °C and were prism type at 300 °C. The prismatic Cu{sub 6}Sn{sub 5} grains grew along the three preferred directions with the inter-angles of 60° on (111) single crystal Cu pad while along two perpendicular directions on (100) single crystal Cu pad. The orientation relationship between Cu{sub 6}Sn{sub 5} grains and the single crystal Cu pads was investigated by electron backscatter diffraction technology. In addition, two types of hollowed Cu{sub 6}Sn{sub 5} intermetallic compounds were found inside the joints of polycrystalline Cu pads. The long hexagonal Cu{sub 6}Sn{sub 5} strips were observed in the joints reflowing at 250 °C while the hollowed Cu{sub 6}Sn{sub 5} strips with the ‘▪’ shape cross-sections appeared at 300 °C, which was attributed to the different grain growth rates of different Cu{sub 6}Sn{sub 5} crystal faces. - Highlights: • The orientation of interfacial Cu{sub 6}Sn{sub 5} grains was obtained by EBSD technology. • Two types of hollowed Cu{sub 6}Sn{sub 5} strips were found at different temperatures. • The formation

  13. One-Step Solvothermal Method to Prepare Ag/Cu2O Composite With Enhanced Photocatalytic Properties.

    PubMed

    Deng, Xiaolong; Wang, Chenggang; Zhou, E; Huang, Jinzhao; Shao, Minghui; Wei, Xianqi; Liu, Xiaojing; Ding, Meng; Xu, Xijin

    2016-12-01

    Ag/Cu2O microstructures with diverse morphologies have been successfully synthesized with different initial reagents of silver nitrate (AgNO3) by a facile one-step solvothermal method. Their structural and morphological characteristics were carefully investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), and the experimental results showed that the morphologies transformed from microcubes for pure Cu2O to microspheres with rough surfaces for Ag/Cu2O. The photocatalytic activities were evaluated by measuring the degradation of methyl orange (MO) aqueous solution under visible light irradiation. The photocatalytic efficiencies of MO firstly increased to a maximum and then decreased with the increased amount of AgNO3. The experimental results revealed that the photocatalytic activities were significantly influenced by the amount of AgNO3 during the preparation process. The possible reasons for the enhanced photocatalytic activities of the as-prepared Ag/Cu2O composites were discussed. PMID:26781287

  14. One-Step Solvothermal Method to Prepare Ag/Cu2O Composite With Enhanced Photocatalytic Properties

    NASA Astrophysics Data System (ADS)

    Deng, Xiaolong; Wang, Chenggang; Zhou, E.; Huang, Jinzhao; Shao, Minghui; Wei, Xianqi; Liu, Xiaojing; Ding, Meng; Xu, Xijin

    2016-01-01

    Ag/Cu2O microstructures with diverse morphologies have been successfully synthesized with different initial reagents of silver nitrate (AgNO3) by a facile one-step solvothermal method. Their structural and morphological characteristics were carefully investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), and the experimental results showed that the morphologies transformed from microcubes for pure Cu2O to microspheres with rough surfaces for Ag/Cu2O. The photocatalytic activities were evaluated by measuring the degradation of methyl orange (MO) aqueous solution under visible light irradiation. The photocatalytic efficiencies of MO firstly increased to a maximum and then decreased with the increased amount of AgNO3. The experimental results revealed that the photocatalytic activities were significantly influenced by the amount of AgNO3 during the preparation process. The possible reasons for the enhanced photocatalytic activities of the as-prepared Ag/Cu2O composites were discussed.

  15. Concentrations of Pb, Zn, and Cu in Taraxacum spp. in relation to urban pollution

    SciTech Connect

    Cook, C.M.; Lanaras, T.; Sgardelis, S.P.; Pantis, J.D. )

    1994-08-01

    The combustion of petroleum fuel and exhaust emissions are major sources of atmospheric pollution in cities which result in the deposition of toxic substances, particularly heavy metals, in the surface layers of soils. Lead in particular enters the environment from the use of tetraethyl lead as an antiknock agent for petrol engines constituting 21% of fine particles emitted from cars burning leaded petrol. Antiwear protectants incorporated in lubricants often contain Cd, Cr, Cu, Hg, Ni, Pb and/or Zn which are also released into the environment by inefficient engines and irresponsible dumping of engine oils. Zn from tyre wear and Cu from diesel engines also add considerably to the environmental metal burden. Lowering of the permitted lead content of petrol and the growing use of unleaded fuel are expected to lead to reductions in the environmental lead burden, however, until unleaded fuel becomes universally accepted lead contamination, particularly of roadside soils and vegetation is a major cause for concern. A direct relationship between car exhaust, the Pb content of needles of Abies alba and reduced growth has been observed and can extend hundreds of metres from major highways. Lead tolerance has been observed in higher plants growing mine waste soils and to a lesser extent on lead-contaminated roadside soils. Automobiles which are responsible for line sources of pollution emissions in rural and suburban areas have a more far-reaching impact on roadside vegetation, already under considerable stress, in urban areas. Information on heavy metal effects on vegetation in urban environments however, are scarce. Modeling and multivariate analysis of a few of the factors involved have provided only limited data related to plant performance in these complex environments. Therefore in this study, the extent of heavy metal pollution by Pb, Zn, Cu and Cd in soils and in dandelion plants in the city of Thessaloniki has been examined. 20 refs., 2 figs., 3 tabs.

  16. Microstructure and anodic polarization behavior of experimental Ag-18Cu-15Pd-12Au alloy in aqueous sulfide solution.

    PubMed

    Endo, Kazuhiko; Ohno, Hiroki; Asakura, Shukuji

    2003-05-01

    The anodic corrosion behavior of an experimental Ag-15Pd-18Cu-12Au alloy in 0.1% Na(2)S solution in relation to its microstructure was investigated using potentiodynamic and potentiostatic polarization techniques with analyses of corrosion products by X-ray diffractometry, Auger electron spectroscopy, and X-ray photoelectron spectroscopy. The role of Pd in improvement of the corrosion resistance was also investigated. In the potential/current density curve, three distinct current peaks, at -520 mV (peak I), -425 mV (peak II) and -175 mV (peak III), were observed. The Ag-rich alpha(2) matrix with coarse Cu and Pd-rich lamellae was the most corrosion-susceptible region, and this region was preferentially corroded at peak I with the formation of granular deposits of Ag(2)S. A small amount of Ag-Cu mixed sulfide deposited on the Cu and Pd-rich coarse particles and dissolution of Ag as AgO(-) might have occurred in parallel with Ag(2)S formation at peak II. Enrichment of Pd on the alloy surface occurred at peak III due to preferential dissolution of Ag and Cu. A high level of corrosion resistance was attained with the formation of a thin Pd-rich sulfide film, which enhanced the passivity of the alloy in an alkaline sulfide solution. It was found that passivity is an important phenomenon not only for base metal alloys but also for noble metal alloys to maintain high levels of resistance to corrosion and tarnishing in sulfide environments. PMID:15348446

  17. Phonons, nature of bonding, and their relation to anomalous thermal expansion behavior of M2O (M = Au, Ag, Cu)

    NASA Astrophysics Data System (ADS)

    Gupta, M. K.; Mittal, R.; Chaplot, S. L.; Rols, S.

    2014-03-01

    We report a comparative study of the dynamics of Cu2O, Ag2O, and Au2O (i.e., M2O with M = Au, Ag, and Cu) using first principle calculations based on the density functional theory. Here, for the first time, we show that the nature of chemical bonding and open space in the unit cell are directly related to the magnitude of thermal expansion coefficient. A good match between the calculated phonon density of states and that derived from inelastic neutron scattering measurements is obtained for Cu2O and Ag2O. The calculated thermal expansions of Ag2O and Cu2O are negative, in agreement with available experimental data, while it is found to be positive for Au2O. We identify the low energy phonon modes responsible for this anomalous thermal expansion. We further calculate the charge density in the three compounds and find that the magnitude of the ionic character of the Ag2O, Cu2O, and Au2O crystals is in decreasing order, with an Au-O bond of covalent nature strongly rigidifying the Au4O tetrahedral units. The nature of the chemical bonding is also found to be an important ingredient to understand the large shift of the phonon frequencies of these solids with pressure and temperature. In particular, the quartic component of the anharmonic term in the crystal potential is able to account for the temperature dependence of the phonon modes.

  18. Activity of calcined Ag,Cu,Au/TiO2 catalysts in the dehydrogenation/dehydration of ethanol

    NASA Astrophysics Data System (ADS)

    Mai, Do Tkhyui; Pylinina, A. I.; Mikhailenko, I. I.

    2015-07-01

    The catalytic activity of the anatase TiO2 and M z+/TiO2 with supported ions M z+ = Ag+, Cu2+, Au3+ in vapor phase conversions of ethanol is investigated at temperatures of 100-400°C. It is shown that the yields of acetaldehyde and ethylene decline for the most active catalyst Cu2+/TiO2 but increase for TiO2 and Ag/TiO2. The drop in the activation energy of the dehydrogenation reaction over calcined samples is linearly correlated with the one in the reduction potential of M z+ to Cu+, Au+, Ag0 and the ionic radius of M z+ in the crystal. The energies of activation for ethylene formation change in the series TiO2 > Au3+ > Cu2+ >Ag+ and TiO2 ≈ Cu2+ ≈ Ag+ > Au3+ for the calcined samples. The rate of pyridine adsorption, considered as an indicator of the activity of acid sites, is a linear function of ion charge + z = 1, 2, 3, and slows by two-thirds after calcination.

  19. Natural water as the test medium for Ag and CuO nanoparticle hazard evaluation: An interlaboratory case study.

    PubMed

    Heinlaan, Margit; Muna, Marge; Knöbel, Melanie; Kistler, David; Odzak, Niksa; Kühnel, Dana; Müller, Josefine; Gupta, Govind Sharan; Kumar, Ashutosh; Shanker, Rishi; Sigg, Laura

    2016-09-01

    Engineered nanoparticles (NPs) have realistic potential of reaching natural waterbodies and of exerting toxicity to freshwater organisms. The toxicity may be influenced by the composition of natural waters as crucial NP properties are influenced by water constituents. To tackle this issue, a case study was set up in the framework of EU FP7 NanoValid project, performing an interlaboratory hazard evaluation of NPs in natural freshwater. Ag and CuO NPs were selected as model NPs because of their potentially high toxicity in the freshwater. Daphnia magna (OECD202) and Danio rerio embryo (OECD236) assays were used to evaluate NP toxicity in natural water, sampled from Lake Greifen and Lake Lucerne (Switzerland). Dissolution of the NPs was evaluated by ultrafiltration, ultracentrifugation and metal specific sensor bacteria. Ag NP size was stable in natural water while CuO NPs agglomerated and settled rapidly. Ag NP suspensions contained a large fraction of Ag(+) ions and CuO NP suspensions had low concentration of Cu(2+) ions. Ag NPs were very toxic (48 h EC50 1-5.5 μg Ag/L) to D. magna as well as to D. rerio embryos (96 h EC50 8.8-61 μg Ag/L) in both standard media and natural waters with results in good agreement between laboratories. CuO NP toxicity to D. magna differed significantly between the laboratories with 48 h EC50 0.9-11 mg Cu/L in standard media, 5.7-75 mg Cu/L in Lake Greifen and 5.5-26 mg Cu/L in Lake Lucerne. No toxicity of CuO NP to zebrafish embryos was detected up to 100 mg/L independent of the medium used. The results show that Ag and CuO NP toxicity may be higher in natural water than in the standard media due to differences in composition. NP environmental hazard evaluation can and should be carried out in natural water to obtain more realistic estimates on the toxicity. PMID:27357482

  20. Dirac and Weyl Semimetal in XYBi (X = Ba, Eu; Y = Cu, Ag and Au).

    PubMed

    Du, Yongping; Wan, Bo; Wang, Di; Sheng, Li; Duan, Chun-Gang; Wan, Xiangang

    2015-01-01

    Weyl and Dirac semimetals recently stimulate intense research activities due to their novel properties. Combining first-principles calculations and effective model analysis, we predict that nonmagnetic compounds BaYBi (Y = Au, Ag and Cu) are Dirac semimetals. As for the magnetic compound EuYBi, although the time reversal symmetry is broken, their long-range magnetic ordering cannot split the Dirac point into pairs of Weyl points. However, we propose that partially substitute Eu ions by Ba ions will realize the Weyl semimetal. PMID:26399742

  1. Extremely High Phosphate Sorption Capacity in Cu-Pb-Zn Mine Tailings.

    PubMed

    Huang, Longbin; Li, Xiaofang; Nguyen, Tuan A H

    2015-01-01

    Elevated inorganic phosphate (Pi) concentrations in pore water of amended tailings under direct revegetation may cause toxicity in some native woody species but not native forbs or herb species, all of which are key constituents in target native plant communities for phytostabilizing base metal mine tailings. As a result, Pi sorption capacity has been quantified by a conventional batch procedure in three types of base metal mine tailings sampled from two copper (Cu)-lead (Pb)-zinc (Zn) mines, as the basis for Pi-fertiliser addition. It was found that the Pi-sorption capacity in the tailings and local soil was extremely high, far higher than highly weathered agricultural soils in literature, but similar to those of volcanic ash soils. The Langmuir P-sorption maximum was up to 7.72, 4.12, 4.02 and 3.62 mg P g-1 tailings, in the fresh tailings of mixed Cu-Pb-Zn streams (MIMTD7), the weathered tailings of mixed Cu-Pb-Zn streams (MIMTD5), EHM-TD (fresh Cu-stream, high magnetite content) and local soil (weathered shale and schist), respectively. Physicochemical factors highly correlated with the high Pi-sorption in the tailings were fine particle distribution, oxalate and dithionite-citrate-bicarbonate extractable Fe (FeO and Fed), oxalate-extractable Al and Mn, and the levels of soluble Cd and Zn, and total S and Fe. Large amounts of amorphous Fe oxides and oxyhydroxides may have been formed from the oxidation of pyritic materials and redox cycles of Fe-minerals (such as pyrite (FeS2), ankerite (Ca(Fe Mg)(CO3)2 and siderite (FeCO3), as indicated by the extractable FeO values. The likely formation of sparingly soluble Zn-phosphate in the Pb-Zn tailings containing high levels of Zn (from sphalerite ((Zn,Fe)S, ZnS, (Zn,Cd)S)) may substantially lower soluble Zn levels in the tailings through high rates of Pi-fertiliser addition. As a result, the possibility of P-toxicity in native plant species caused by the addition of soluble phosphate fertilizers would be minimal. PMID

  2. Variation of photon interaction parameters with energy for some Cu-Pb alloys

    SciTech Connect

    Singh, Tejbir Kaur, Sarpreet; Kaur, Parminder; Kaur, Harvinder; Singh, Parjit S.

    2015-08-28

    Various photon interaction parameters (mass attenuation coefficients, effective atomic numbers and effective electron numbers) have been computed for different compositions of Cu-Pb alloys in the wide energy regime of 1 keV to 100 GeV. The mass attenuation coefficients have been computed using mixture rule with the help of WinXCom (mass attenuation coefficient database for elements). The variation of mass attenuation coefficients, effective atomic numbers and electron density has been analysed and discussed in terms of dominance of different photon interaction processes viz. Compton scattering, photoelectric effect and pair production.

  3. Effect of Ni substitution for Cu in the vortex state of (Bi,Pb):2223 superconductor

    SciTech Connect

    Pop, A.V.

    1999-09-10

    The influence of the partial substitution of x = 0.02 Ni for Cu on the magnetoresistivity in the (Bi,Pb):2223 superconductor has been investigated. The resistive transitions were studied under magnetic fields up to 0.7 Tesla by using the dp/dT versus T curves. The Arrhenius plots shows that the dissipation processes are induced by two distinct regimes. In the high temperature regime the activation energy is proportional to lnB and to B{sup {minus}1} in low temperature regime. The main dissipation processes in these regimes are discussed.

  4. Extremely High Phosphate Sorption Capacity in Cu-Pb-Zn Mine Tailings

    PubMed Central

    Huang, Longbin; Li, Xiaofang; Nguyen, Tuan A. H.

    2015-01-01

    Elevated inorganic phosphate (Pi) concentrations in pore water of amended tailings under direct revegetation may cause toxicity in some native woody species but not native forbs or herb species, all of which are key constituents in target native plant communities for phytostabilizing base metal mine tailings. As a result, Pi sorption capacity has been quantified by a conventional batch procedure in three types of base metal mine tailings sampled from two copper (Cu)-lead (Pb)-zinc (Zn) mines, as the basis for Pi-fertiliser addition. It was found that the Pi-sorption capacity in the tailings and local soil was extremely high, far higher than highly weathered agricultural soils in literature, but similar to those of volcanic ash soils. The Langmuir P-sorption maximum was up to 7.72, 4.12, 4.02 and 3.62 mg P g-1 tailings, in the fresh tailings of mixed Cu-Pb-Zn streams (MIMTD7), the weathered tailings of mixed Cu-Pb-Zn streams (MIMTD5), EHM-TD (fresh Cu-stream, high magnetite content) and local soil (weathered shale and schist), respectively. Physicochemical factors highly correlated with the high Pi-sorption in the tailings were fine particle distribution, oxalate and dithionite-citrate-bicarbonate extractable Fe (FeO and Fed), oxalate-extractable Al and Mn, and the levels of soluble Cd and Zn, and total S and Fe. Large amounts of amorphous Fe oxides and oxyhydroxides may have been formed from the oxidation of pyritic materials and redox cycles of Fe-minerals (such as pyrite (FeS2), ankerite (Ca(Fe Mg)(CO3)2 and siderite (FeCO3), as indicated by the extractable FeO values. The likely formation of sparingly soluble Zn-phosphate in the Pb-Zn tailings containing high levels of Zn (from sphalerite ((Zn,Fe)S, ZnS, (Zn,Cd)S)) may substantially lower soluble Zn levels in the tailings through high rates of Pi-fertiliser addition. As a result, the possibility of P-toxicity in native plant species caused by the addition of soluble phosphate fertilizers would be minimal. PMID

  5. Variation of photon interaction parameters with energy for some Cu-Pb alloys

    NASA Astrophysics Data System (ADS)

    Singh, Tejbir; Kaur, Sarpreet; Kaur, Parminder; Kaur, Harvinder; Singh, Parjit S.

    2015-08-01

    Various photon interaction parameters (mass attenuation coefficients, effective atomic numbers and effective electron numbers) have been computed for different compositions of Cu-Pb alloys in the wide energy regime of 1 keV to 100 GeV. The mass attenuation coefficients have been computed using mixture rule with the help of WinXCom (mass attenuation coefficient database for elements). The variation of mass attenuation coefficients, effective atomic numbers and electron density has been analysed and discussed in terms of dominance of different photon interaction processes viz. Compton scattering, photoelectric effect and pair production.

  6. Clathrates with Me = Mg, Pd, Ni, Au, Ag, Cu, Zn, Al, Sn

    NASA Astrophysics Data System (ADS)

    Wunderlich, Wilfried; Amano, Mao; Matsumura, Yoshihito

    2014-06-01

    Clathrate materials of AlSi, CuSi or NiSi type consisting of abundant elements have a realistic chance of becoming useful thermoelectrics in the near future, because the rattling effect due to their crystal cage structure provides a large figure of merit ZT even in experiments measured under large temperature gradients. In the search for better thermoelectrics, new element combinations in the clathrate type I structure with cubic space group Pm3n were calculated using VASP ab initio software. Predictions of the Seebeck coefficient were made by checking the electronic band structure and density of states for a large variety of input data. For x values around 4 to 6 in the structural formula Ba8Me x Si46- x the substituents Cu, Au, and Ag are best for good thermoelectric behavior, which is discussed in this paper as a result of the low electron-phonon interaction parameter.

  7. Microstructure analyses and thermoelectric properties of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}

    SciTech Connect

    Perlt, S.; Hoeche, Th.; Dadda, J.; Mueller, E.; Bauer Pereira, P.; Hermann, R.; Sarahan, M.; Pippel, E.; Brydson, R.

    2012-09-15

    This study reports microstructural investigations of long-term annealed Ag{sub 1-x}Pb{sub m}Sb{sub 1+y}Te{sub 2+m} (m=18, x=y=0, hereinafter referred to as AgPb{sub 18}SbTe{sub 20}) (Lead-Antimony-Silver-Tellurium, LAST-18) as well as of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}, i.e. Ag-deficient and Sb-excess LAST-18 (x{ne}0,y{ne}0), respectively. Two different length scales are explored. The micrometer scale was evaluated by SEM to analyze the volume fraction and the number of secondary phases as well as the impact of processing parameters on the homogeneity of bulk samples. For AgPb{sub 18}SbTe{sub 20}, site-specific FIB liftout of TEM lamellae from thermoelectrically characterized samples was accomplished to investigate the structure on the nanometer scale. High-resolution TEM and energy-filtered TEM were performed to reveal shape and size distribution of nanoprecipitates, respectively. A hypothesis concerning the structure-property relationship is set out within the frame of a gradient annealing experiment. This study is completed by results dealing with inhomogeneities on the micrometer scale of Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} and its electronic properties. Highlights: Black-Right-Pointing-Pointer SEM and TEM microstructure investigation of long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer SEM and thermoelectric studies on Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20}. Black-Right-Pointing-Pointer Discussion concerning structure-property relationship in long-term annealed AgPb{sub 18}SbTe{sub 20}. Black-Right-Pointing-Pointer Correlation between Ag{sub 1-x}Pb{sub 18}Sb{sub 1+y}Te{sub 20} microscale structure and electronic properties.

  8. Interaction of Cu(2+), Pb (2+), Zn (2+) with trypsin: what is the key factor of their toxicity?

    PubMed

    Zhang, Tong; Zhang, Hao; Liu, Guiliang; Gao, Canzhu; Liu, Rutao

    2014-11-01

    Heavy metals possess great endangerment to environment even human health because of their indissolubility and bioaccumulation. The toxicity of heavy metal ions (Cu(2+), Pb(2+), Zn(2+)) to trypsin was investigated by fluorescence, synchronous fluorescence, UV-vis absorption, circular dichroism (CD) spectroscopy, isothermal titration calorimetry (ITC), and enzyme activity assay. The experimental results showed that toxic effect of heavy metal ions was due to their own characteristic, rather than the electric charges of the ion. Zn(2+) could not show the obvious toxicity to trypsin, while the structure and function of trypsin was damaged when the enzyme explored to Cu(2+) and Pb(2+). From the spectra results, we found that Cu(2+) would bind with trypsin, which lead to the fluorescence quenched and hydrophobicity increased. Pb(2+) could also change the structure and reduce the activity of trypsin in high concentration. In vitro measurement, the toxicity order of heavy metal ions to trypsin is: Cu(2+) > Pb(2+) > Zn(2+). In addition, isothermal titration calorimetry analysis proved that the interactions between Cu(2+), Pb(2+), Zn(2+) and trypsin were all spontaneous and exothermic, which indicated the adverse effect of these heavy metal ions to trypsin. PMID:25323557

  9. Distribution, bioavailability, and potential ecological risk of Cu, Pb, and Zn in soil in a potential groundwater source area.

    PubMed

    Teng, Yanguo; Feng, Dan; Wu, Jin; Zuo, Rui; Song, Liuting; Wang, Jinsheng

    2015-05-01

    In this study, we examined three horizontal and vertical soil profiles along a sewage drainage ditch in order to determine the spatial distribution of Cu, Pb, and Zn in soils and to assess the bioavailability and potential ecological risks associated with these metals in a potential groundwater source area. Results showed that the concentrations of Cu, Pb, and Zn were approximately at background level, suggesting that human activities (industrial and agricultural pollution) had a negligible influence on these metals in soil, and that the concentrations reflected the natural background levels in the study area. Cu, Pb, and Zn concentrations were slightly higher in topsoil (0-20 cm) than deeper in the soil profile. Using a modified BCR sequential extraction method to evaluate the mobility and bioavailability of metals showed that the potential bioavailability sequence of Cu, Pb, and Zn at three depths in the soil profile was in the order Cu ≈ Pb < Zn. The potential ecological risk from the metals was evaluated using risk assessment code, and the results suggest that Cu and Zn pose no or low risk, while there is a low or medium risk from Pb. Results from groundwater monitoring showed that the groundwater was not polluted by leaching from soil. PMID:25910722

  10. Accumulation of Sb, Pb, Cu, Zn and Cd by various plants species on two different relocated military shooting range soils.

    PubMed

    Evangelou, Michael W H; Hockmann, Kerstin; Pokharel, Rasesh; Jakob, Alfred; Schulin, Rainer

    2012-10-15

    Annually, more than 400 t Pb and 10 t Sb enter Swiss soils at some 2000 military shooting ranges. After the decommission of military shooting ranges, heavily contaminated soils (>2000 mg kg(-1) Pb) are landfilled or processed by soil washing, whereas for soils with less contamination, alternate strategies are sought. Although the use of military shooting ranges for grazing in Switzerland is common practice, no assessment has been done about the uptake of Sb in plants and its subsequent potential intake by grazing animals. We determined the uptake of Sb, Pb, Cu, Zn and Cd in the aboveground biomass of nine plant species growing on a calcareous (Chur) and a weakly acidic (Losone) military shooting range soil in order to assess if grazing would be safe to employ on decommissioned military shooting ranges. The two soils did not differ in their total concentrations of Cu, Zn, Sb and Cd, they differed however in the total concentration of Pb. Additionally, their physical and chemical properties were significantly different. The accumulation of Zn, Cu, Cd and Pb in the shoots of all nine plant species remained below the Swiss tolerance values for fodder plants (150 mg kg(-1) Zn, 15-35 mg kg(-1) Cu, 40 mg kg(-1) Pb, and 1 mg kg(-1) Cd DW), with the only exception of Pb in Chenopodium album shoots which reached a concentration of 62 mg kg(-1) DW. Antimony concentrations were 1.5-2.6-fold higher in plants growing on the calcareous soil than on the weakly acidic soil. Considering Cu, Zn, Pb, Sb and Cd, all plants, with the exception C. album, would be suitable for grazing on similar shooting range soils. PMID:22659605

  11. Chitosan film loaded with silver nanoparticles-sorbent for solid phase extraction of Al(III), Cd(II), Cu(II), Co(II), Fe(III), Ni(II), Pb(II) and Zn(II).

    PubMed

    Djerahov, Lubomir; Vasileva, Penka; Karadjova, Irina; Kurakalva, Rama Mohan; Aradhi, Keshav Krishna

    2016-08-20

    The present study describes the ecofriendly method for the preparation of chitosan film loaded with silver nanoparticles (CS-AgNPs) and application of this film as efficient sorbent for separation and enrichment of Al(III), Cd(II), Cu(II), Co(II), Fe(III), Ni(II), Pb(II) and Zn(II). The stable CS-AgNPs colloid was prepared by dispersing the AgNPs sol in chitosan solution at appropriate ratio and further used to obtain a cast film with very good stability under storage and good mechanical strength for easy handling in aqueous medium. The incorporation of AgNPs in the structure of CS film and interaction between the polymer matrix and nanoparticles were confirmed by UV-vis and FTIR spectroscopy. The homogeneously embedded AgNPs (average diameter 29nm, TEM analysis) were clearly observed throughout the film by SEM. The CS-AgNPs nanocomposite film shows high sorption activity toward trace metals under optimized chemical conditions. The results suggest that the CS-AgNPs nanocomposite film can be feasibly used as a novel sorbent material for solid-phase extraction of metal pollutants from surface waters. PMID:27178907

  12. Electrokinetic enhancement on phytoremediation in Zn, Pb, Cu and Cd contaminated soil using potato plants.

    PubMed

    Aboughalma, Hanssan; Bi, Ran; Schlaak, Michael

    2008-07-01

    The use of a combination of electrokinetic remediation and phytoremediation to decontaminate soil polluted with heavy metals has been demonstrated in a laboratory-scale experiment. Potato tubers were planted in plastic vessels filled with Zn, Pb, Cu and Cd contaminated soil and grown in a greenhouse. Three of these vessels were treated with direct current electric field (DC), three with alternative current (AC) and three remained untreated as control vessels. The soil pH varied from anode to cathode with a minimum of pH 3 near the anode and a maximum of pH 8 near the cathode in the DC treated soil profile. There was an accumulation of Zn, Cu and Cd at about 12 cm distance from anode when soil pH was 5 in the DC treated soil profile. There was no significant metal redistribution and pH variation between anode and cathode in the AC soil profile. The biomass production of the plants was 72% higher under AC treatment and 27% lower under DC treatment compared to the control. Metal accumulation was generally higher in the plant roots treated with electrical fields than the control. The overall metal uptake in plant shoots was lower under DC treatment compared to AC treatment and control, although there was a higher accumulation of Zn and Cu in the plant roots treated with electrical fields. The Zn uptake in plant shoots under AC treatment was higher compared to the control and DC treatment. Zn and Cu accumulation in the plant roots under AC and DC treatment was similar, and both were higher comparing to control. Cd content in plant roots under all three treatments was found to be higher than that in the soil. The Pb accumulation in the roots and the uptake into the shoots was lower compared to its content in the soil. PMID:18569305

  13. Uptake and toxicity of Cd, Cu and Pb mixtures in the isopod Asellus aquaticus from waterborne exposure.

    PubMed

    Van Ginneken, M; De Jonge, M; Bervoets, L; Blust, R

    2015-12-15

    The present study evaluated interactions of waterborne Cd, Cu and Pb mixtures on metal uptake rates in the isopod Asellus aquaticus and related this to mixture effects on toxicity. Secondly, it was assessed whether observed mixture effects were better related to isopod body concentrations compared to exposure concentrations. Isopods were exposed for 10 days to single, binary and tertiary mixtures including five different concentrations of Cd (0.107 to 277 μg L(-1)), Cu (3.35 to 2117 μg L(-1)) and Pb (0.782 to 443 μg L(-1)). Mortality was assessed every day while isopod body concentrations, growth (biomass) and energy reserves (glycogen, lipid and protein reserves) were assessed at the end of the experiment. Synergistic interactions of combined Cd and Pb exposure on Cd and Pb uptake as well as on growth rates and mortality rates were observed. Mixture effects of combined Cd and Pb exposure on toxicity endpoints were directly related to increased Cd uptake in the Cd+Pb treatment. No mixture interactions of Cu on Cd or Pb uptake (and vice versa), nor on toxicity endpoints were observed. All toxicity endpoints were related to body concentrations. However, mixture effects disappeared when growth and mortality rates were expressed on body concentrations instead of exposure concentrations. By combining information of mixture effects on metal uptake with mixture toxicity data, the present study provides more insight in the way metal mixtures interfere with aquatic organisms and how they can induce toxic effects. PMID:26282750

  14. An analytical electron microscopic investigation of precipitation in an Al-Cu-Zn-Mg-Ag alloy.

    PubMed

    Hasan, F; Lorimer, G W

    1993-03-01

    The distribution, morphology, chemistry, and crystallography of the precipitates formed during aging of an Al-Cu-Zn-Mg-Ag alloy have been studied using analytical transmission electron microscopy. The first precipitates to appear during aging at 150 degrees C were thin hexagonal-shaped plate-like precipitates which formed on the (111)Al planes. These precipitates had a face-centred orthorhombic crystal structure and their composition was essentially CuAl2 although they contained a trace of silver. At peak hardness the microstructure consisted of the plate-like precipitates on (111)Al planes and theta' precipitates on (100)Al planes. Overaging resulted in the precipitation of equilibrium theta, CuAl2, which exhibited a lath morphology and an orientation-relationship with the matrix (210)Al magnitude of (110)gamma; (001)Al misoriented from (001)gamma by approximately 6 degrees. Prolonged overaging at 250 degrees C resulted in the formation of cuboid-shaped Al5(Cu,Zn)6Mg2 precipitates which had a cubic crystal structure and a cube:cube orientation-relationship with the matrix. PMID:8513176

  15. Enhanced hydrogenation and reduced lattice distortion in size selected Pd-Ag and Pd-Cu alloy nanoparticles

    SciTech Connect

    Sengar, Saurabh K.; Mehta, B. R.; Kulriya, P. K.; Khan, S. A.

    2013-10-21

    Important correlation between valence band spectra and hydrogenation properties in Pd alloy nanoparticles is established by studying the properties of size selected and monocrystalline Pd, Ag, Cu, Pd-Ag, and Pd-Cu nanoparticles. The X-ray photoelectron spectroscopy and elastic recoil detection analysis show that size induced Pd4d centroid shift is related to enhanced hydrogenation with H/Pd ratio of 0.57 and 0.49 in Pd-Ag and Pd-Cu nanoparticles in comparison to reported bulk values of 0.2 and 0.1, respectively. Pd-alloy nanoparticles show lower hydrogen induced lattice distortion. The reduced distortion and higher hydrogen reactivity of Pd-alloy nanoparticles is important for numerous hydrogen related applications.

  16. Mechanical, structural and thermal properties of Ag-Cu and ZnO reinforced polylactide nanocomposite films.

    PubMed

    Ahmed, Jasim; Arfat, Yasir Ali; Castro-Aguirre, Edgar; Auras, Rafael

    2016-05-01

    Plasticized polylactic acid (PLA) based nanocomposite films were prepared by incorporating polyethylene glycol (PEG) and two selected nanoparticles (NPs) [silver-copper (Ag-Cu) alloy (<100 nm) and zinc oxide (ZnO) (<50 and <100 nm)] through solvent casting method. Incorporation of Ag-Cu alloy into the PLA/PEG matrix increased the glass transition temperature (Tg) significantly. The crystallinity of the nanocomposites (NCs) was significantly influenced by NP incorporation as evidenced from differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. The PLA nanocomposite reinforced with NPs exhibited much higher tensile strength than that of PLA/PEG blend. Melt rheology of NCs exhibited a shear-thinning behavior. The mechanical property drastically reduced with a loading of NPs, which is associated with degradation of PLA. SEM micrographs exhibited that both Ag-Cu alloy and ZnO NPs were dispersed well in the PLA film matrix. PMID:26893045

  17. Composition dependence of the photochemical reduction of Ag+ by as-grown Pb(ZrxTi1-x)O3 films on indium tin oxide electrode

    NASA Astrophysics Data System (ADS)

    Zhang, Man; Jiang, Chunxiang; Dong, Wen; Zheng, Fengang; Fang, Liang; Su, Xiaodong; Shen, Mingrong

    2013-09-01

    Photochemical growth of metal particles on ferroelectric films has usually been found to depend on polarization effect solely. This research exploits the interplay of the film/electrode interface barrier and depolarization field on the photoreduction of Ag+ to Ag onto Pb(Zr,Ti)O3 (PZT) films deposited on indium tin oxide (ITO) electrodes. Ag nanoparticles are observed on the as-grown polycrystalline PZT films without poling, while the particle size and density are closely related to the concentration of Zr in PZT and the poling direction. The enhancement on the photoelectrochemical properties of the ITO/PZT photocathode by the decoration of Ag nanoparticles is finally demonstrated.

  18. Luminescence and scintillation properties of La- and La,Ag-doped CsPbCl3 single crystals

    NASA Astrophysics Data System (ADS)

    Watanabe, Kei; Koshimizu, Masanori; Yanagida, Takayuki; Fujimoto, Yutaka; Asai, Keisuke

    2016-02-01

    We analyzed the luminescence and scintillation properties of CsPbCl3 single crystals. La and Ag were chosen as the dopants, although Ag proved to have little effect on the scintillation properties. In the photoluminescence spectra, in addition to the free exciton band at 425 nm, an additional band was observed at 440 nm at low temperatures for the La-doped crystals. The scintillation spectrum of the undoped crystal was composed of the free exciton band and a broad band at 600 nm, which is ascribed to lattice defects. The La doping strongly suppressed both the broad band and the slow scintillation component, which is ascribed to the emission at lattice defects.

  19. Factors Affecting the Morphology of Pb-Based Glass Frit Coated with Ag Material Prepared by Electroless Silver Plating

    NASA Astrophysics Data System (ADS)

    Huang, Bei; Gan, Weiping; Zhou, Jian; Li, Yingfen; Lin, Tao; Liu, Xiaogang

    2014-05-01

    Pb-based glass frit coated with nanosilver material for Si solar cell applications has been directly prepared by electroless silver plating. Activation of the glass frit was accomplished by using glycol, with the aim of reducing the silver ions to elemental silver on the surface of the glass frit. Electroless silver plating onto the glass frit was successfully realized using two kinds of electroless plating bath. However, the morphology of the composite powder greatly affected the modality, sheet resistance, series resistance, and photoelectric conversion efficiency of the conducting silver films. We found that the activation temperature affected the number and distribution of silver nanoparticles. Meanwhile, the average grain size of the silver particles and the silver content in the Pb-based glass frit coated with Ag material could be controlled by adjusting the pH value and loading capacity, respectively, during plating.

  20. Self-organized metal networks at ion-etched Cu/Si and Ag/Si interfaces

    SciTech Connect

    Stepanova, M.; Dew, S.K.; Karpuzov, D.S.

    2005-04-15

    We report self-organized metal nanopatterns on Si substrates produced by ion beam etching. We have deposited thin layers of metal such as Cu or Ag on Si substrates and then etched the deposited layers by a 1-5 keV Ar{sup +} ion beam at room temperature. At the stage when the metal-Si interface is reached, we have observed networks of metal clusters on the Si substrate with the characteristic size of 30-60 nm for Cu and 100-200 nm for Ag. The Cu patterns are sensitive to the ion energy. At 1 keV energy, we observe a well-defined Cu network, whereas at 3-5 keV energy, the Cu pattern becomes fuzzy without clear boundaries. To systematize and explain our results, we have suggested a kinetic model that combines ion etching and coarsening of the metal clusters on Si substrates. From our kinetic Monte Carlo simulations, we have found that the cooperative effect of coarsening and etching has a regime when the size of metal clusters can be approximated by the expression a(4D/aR){sup 1/3}, where D is the surface diffusivity of metal adatoms on the Si substrate, R is the etch rate, and a is the interatomic distance. Our synergistic model of coarsening and sputtering explains the observed difference in Cu and Ag cluster sizes and predicts the fuzzy Cu patterns at elevated ion energies.

  1. Hydrazine reduction of metal ions to porous submicro-structures of Ag, Pd, Cu, Ni, and Bi

    SciTech Connect

    Wang Yue; Shi Yongfang; Chen Yubiao; Wu Liming

    2012-07-15

    Porous submicro-structures of Ag, Pd, Cu, Ni, and Bi with high surface area have been prepared by the reduction of hydrazine in glycerol-ethanol solution at room temperature or 120-180 Degree-Sign C. Phase purity, morphology, and specific surface area have been characterized. The reactions probably undergo three different mechanisms: simple reduction for Ag and Pd, coordination-then-reduction for Cu and Ni, and hydrolysis-then-reduction for Bi. The reductant hydrazine also plays an important role to the formation of the porous submicro-structure. The reaction temperature influences the size of the constituent particles and the overall architecture of the submicro-structure so as to influence the surface area value. The as-prepared porous metals have shown the second largest surface area ever reported, which are smaller than those made by the reduction of NaBH{sub 4}, but larger than those made by hard or soft template methods. - Graphical abstract: Porous submicro-structures of Ag, Pd, Cu, Ni, and Bi with high surface area have been prepared by the reduction of hydrazine in the glycerol-ethanol solution at room temperature or 120-180 Degree-Sign C. The reactions undergo different mechanisms: simple reduction for Ag and Pd, coordination-then-reduction for Cu and Ni, and hydrolysis-then-reduction for Bi. Highlights: Black-Right-Pointing-Pointer Syntheses of porous Ag, Pd, Cu, Ni, and Bi with high surface area. Black-Right-Pointing-Pointer Ag and Pd undergo simple reduction. Black-Right-Pointing-Pointer Cu and Ni undergo coordination-then-reduction. Black-Right-Pointing-Pointer Bi undergoes hydrolysis-then-reduction. Black-Right-Pointing-Pointer The as-prepared metals have shown the second largest surface area ever reported.

  2. Electrochemical depositions of fluorohydroxyapatite doped by Cu2+, Zn2+, Ag+ on stainless steel substrates

    NASA Astrophysics Data System (ADS)

    Bir, F.; Khireddine, H.; Touati, A.; Sidane, D.; Yala, S.; Oudadesse, H.

    2012-07-01

    Fluoridated hydroxyapatite (FHA, Ca10(PO4)6(OH)2-xFx where 0 < x < 2 is the degree of fluoridation) and inorganic ions (Zn2+, Cu2+, Ag+) substituted fluoridated hydroxyapatite coatings (M-FHA) were deposited on the surface of medical grade 316L stainless steel samples by electrochemical deposition technique. The FHA coatings were co-substituted with antibacterial ions (Zn2+, Cu2+ or Ag+) by co-precipitation and ion-exchange methods. Characterization studies of coatings from X-ray diffraction (XRD), Scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDX) showed that the obtained layers are monophase crystals FHA and did not contain any discernible crystalline impurity. The particles of all samples are of nano size that gives thin layers. The surface morphology, microstructure and Ca/P atomic ratio of the FHA coatings can be regulated by varying electrolyte temperature. This later affects the porosity of the coating surface and the chemical compositions of the deposits. Quantitative elemental analysis indicates that the copper, zinc and silver ions are incorporated into the Fluorohydroxyapatite. The antimicrobial effects of doped fluorohydroxyapatite coatings against pathogen bacterial strains Staphylococcus aureus were tested in liquid media. The results are promising and demonstrated that all doped FHA samples exhibit excellent antimicrobial activity "in vitro" against the microorganism, so the antimicrobial properties of the coatings developed are improved.

  3. HRLEED study of the roughening transitions in Cu(110), Ni(110) and Ag(110) surfaces

    SciTech Connect

    Wang, K.; Montano, P.A. |

    1996-12-01

    The authors present the results of High Resolution Low Energy Electron Diffraction (HRLEED) measurements of the thermal roughening transition on Cu(110), Ag(110) and Ni(110) surfaces. They performed careful spot profile intensity measurements as a function of temperature. They observed a proliferation of steps along the (110) and (001) directions. In addition a strong deviation from a Debye model was observed in the scattered intensity of the Bragg reflections. This deviation from the harmonic approximation occurs well below the roughening transition temperature. The behavior of the three metal surfaces is qualitatively similar except for the transition temperatures. Ni shows the highest transition temperature (1,300 K), Cu is intermediate (1,000 K) and Ag has the lowest temperature (730 K). Analyzing the behavior of the (00) reflection intensity, and the evolution of the line shape as a function of the temperature, they found clear evidence of a roughening transition at the (110) surface. A lineshape analysis of the (00) reflection shows the transition from a Lorentzian lineshape to a power law. They also proved, based on the experimental data and a recent theoretical model, that there is a tremendous increase in step density and a decrease in the average terrace size as the temperature increases. They used STM to corroborate the HRLEED results at room temperature. They found excellent agreement.

  4. Hot Deformation Characteristics and Processing Maps of the Cu-Cr-Zr-Ag Alloy

    NASA Astrophysics Data System (ADS)

    Zhang, Yi; Chai, Zhe; Volinsky, Alex A.; Sun, Huili; Tian, Baohong; Liu, Ping; Liu, Yong

    2016-03-01

    The hot deformation behavior of the Cu-Cr-Zr-Ag alloy has been investigated by hot compressive tests in the 650-950 °C temperature and 0.001-10 s-1 strain rate ranges using Gleeble-1500D thermo-mechanical simulator. The microstructure evolution of the alloy during deformation was characterized using optical and transmission electron microscopy. The flow stress decreases with the deformation temperature and increases with the strain rate. The apparent activation energy for hot deformation of the alloy was 343.23 kJ/mol. The constitutive equation of the alloy based on the hyperbolic-sine equation was established to characterize the flow stress as a function of the strain rate and the deformation temperature. The processing maps were established based on the dynamic material model. The optimal processing parameters for hot deformation of the Cu-Cr-Zr-Ag alloy are 900-950 °C and 0.001-0.1 s-1 strain rate. The evolution of DRX microstructure strongly depends on the deformation temperature and the strain rate.

  5. Containerless electromagnetic levitation melting of Cu-Fe and Ag-Ni alloys

    NASA Technical Reports Server (NTRS)

    Abbaschian, G. J.; Ethridge, E. C.

    1983-01-01

    The feasibility of producing silver or copper alloys containing finely dispersed nickel or iron particles, respectively, by utilizing containerless electromagnetic levitation casting techniques was investigated. A levitation coil was designed to successfully levitate and melt a variety of alloys including Nb-Ge, Cu-Fe, Fe-C, and Ag-Ni. Samples of 70 Cu-30 Fe and 80 Ag-20 Ni (atomic %), prepared by mechanical pressing of the constituent powders, were levitated and heated either to the solid plus liquid range of the alloys or to the fully liquid region. The samples were then solidified by passing helium gas into the bell jar or they were dropped into a quenching oil. The structure of the samples which were heated to the solid plus liquid range consists of uniform distribution of Fe or Ni particle in their respective matrices. A considerable amount of entrapped gas bubbles were contained. Upon heating for longer periods or to higher temperatures, the bubbles coalesced and burst, causing the samples to become fragmented and usually fall out of the coil.

  6. Solubility and Dissolution Rate of Ni Base Alloy to Molten Ag-Cu-Pd Brazing Filler

    NASA Astrophysics Data System (ADS)

    Ikeshoji, Toshi-Taka; Watanabe, Yuki; Suzumura, Akio; Yamazaki, Takahisa

    During the brazing process of the rocket engine’s nozzle skirt assembly made from Fe-Ni based super alloy pipes with Pd based brazing filler, the erosion corrosion pits were sometimes engraved on those pipes’ surface. The corrosion is considered to be assisted by the dynamic flow of the molten brazing filler. In order to estimate the amount of erosion corrosion and to prevent it, the solubility and the dissolution rate of Ni to the molten Ag-Cu-Pd brazing filler are measured experimentally. The Ni crucible poured with the Ag-Cu-Pd brazing filler was heated up to 1320K and quenched after the various keeping time. The microstructure of the solidified brazing filler part’s cross sections was observed, and the amount of the dissolved Ni was estimated using the image processing technique. The solubility was about 5.53mass%and the initial dissolution rate was 6.28 × 10-3mass%/s. Using these data, more elaborate dynamic flow simulation will be able to conduct.

  7. Phase Evolution in the Pd-Ag-CuO Air Braze Filler Metal Alloy System

    SciTech Connect

    Darsell, Jens T.; Weil, K. Scott

    2006-08-01

    Palladium was added as a ternary component to a series of copper oxide-silver alloys in an effort to increase the use temperature of these materials for potential ceramic air brazing applications. Phase equilibria in the ternary Pd-Ag-CuO system were investigated via differential scanning calorimetry (DSC) and a series of quenching experiments. Presented here are the latest findings on this system and a construction of the corresponding ternary phase diagram for low-to-moderate additions of palladium. The analysis included samples with higher palladium additions than were studied in the past, as well as an analysis of the composition-temperature trends in the Ag-CuO miscibility gap with palladium addition. It was found that the addition of palladium increases the solidus and liquidus and caused three phase zones to appear as expected by the phase rule. Furthermore, the palladium additions cause the miscibility gap boundary extending from the former binary eutectic to shift to lower silver-to-copper ratios.

  8. Fabrication of a high-performance Pb-PtCu/CNT catalyst for methanol electro-oxidation

    NASA Astrophysics Data System (ADS)

    Huang, Yiyin; Cai, Jindi; Zheng, Shiying; Guo, Yonglang

    2012-07-01

    This work presents a general strategy to fabricate a new type of hierarchically structured trimetallic nano-catalyst. Cu nanoparticles are partially displaced by Pt4+ and then further decorated by Pb (II) species on the carbon nanotube surface. The X-ray photoelectron spectroscopy and cyclic voltammograms data demonstrate that Cu is inside the particles while Pb (II) species are outside. The novel Pb-PtCu/CNT catalyst exhibits superior stability and CO poisoning tolerance during potential cycling. Methanol oxidation peak current of this novel catalyst (94.4 mA cm-2) is almost two times higher than that of the commercial PtRu/C (50 mA cm-2).

  9. Applications of GIS and a Handheld XRF for Mapping Cu and Pb Contaminations in Abandoned Mine Areas

    NASA Astrophysics Data System (ADS)

    Lee, H.; Choi, Y.; Yi, H.; Kim, D. H.

    2014-12-01

    In this study, we used a handheld X-Ray Fluorescence (XRF) and Geographic Information Systems (GIS) to create soil contamination maps regarding Cu and Pb around abandoned mining areas. The Busan abandoned mine in Korea was selected as a study area. Digital Elevation Models (DEMs)-based Terrain analysis was performed to identify locations for investigating the soil contamination. At the locations, Cu and Pb contaminations were investigated by using the handheld XRF. The field investigation data were inputted into GIS and utilized to create soil contamination maps using the ordinary kriging method (one of the geostatistical interpolation techniques used in GIS). High concentrations of Cu and Pb were shown at the waste and tailings dumps around abandoned mine openings. As a result, we could know that the method for creating soil contamination maps using a handheld and GIS can be utilized effectively.

  10. Heavy metal (Cu, Zn, Cd and Pb) contamination of vegetables in urban India: a case study in Varanasi.

    PubMed

    Sharma, Rajesh Kumar; Agrawal, Madhoolika; Marshall, Fiona M

    2008-07-01

    The contributions of heavy metals in selected vegetables through atmospheric deposition were quantified in an urban area of India. Deposition rate of Zn was recorded maximum followed by Cu, Cd and Pb. The concentrations of Zn and Cu were highest in Brassica oleracea, Cd in Abelmoschus esculentus and B. oleracea, while Pb was highest in Beta vulgaris. Heavy metal pollution index showed that B. oleracea was maximally contaminated with heavy metals followed by A. esculentus and then B. vulgaris. The results of washing showed that atmospheric deposition has contributed to the increased levels of heavy metals in vegetables. Both Cu and Cd posed health risk to local population via test vegetables consumption, whereas Pb posed the same only through B. oleracea. The study concludes that atmospheric depositions can elevate the levels of heavy metals in vegetables during marketing having potential health hazards to consumers. PMID:18031880

  11. Two Liquid Phases Separation of Fe-Cu-B and Fe-Cu-Ag-B systems at 1873 and 1523 K

    NASA Astrophysics Data System (ADS)

    Ono-Nakazato, Hideki; Yamaguchi, Katsuhiro; Agawa, Shingo; Taguchi, Kenji; Usui, Tateo

    In recycling of steel scraps, the accumulation of tramp element in steel has been one of serious problems. Because copper in steel causes hot-shortness, the copper content of steel scraps is strictly adjusted under the upper limiting value in steelmaking process. In addition, recycling of steel scrap is necessary for energy savings and to realize a recycling-oriented society. In the present study,it was found that addition of boron could separate a single liquid in Fe-Cu system into Fe-rich and Cu-rich phases. Equilibrium experiments in Fe-Cu-B ternary system at 1873 and 1523 K showed that the copper content in Fe-rich phase decreased to 4.3 mass%. Subsequently, equilibrium experiments in Fe-Cu-Ag-B system were carried out and the copper was observed to be distributed between Fe-B and Ag phases. The distribution ratio of [mass%Cu](in Ag) / [mass%Cu](in Fe) was about 6 at 1873 K, regardless of copper content. It was found that the copper content of iron could be decreased by using silver as the solvent.

  12. Structural and magnetic phase transitions in CeCu6-xTx (T = Ag,Pd)

    DOE PAGESBeta

    Poudel, Lekhanath N.; De la cruz, Clarina; Payzant, E. Andrew; Koehler, Michael R.; May, Andrew F.; Garlea, Vasile O.; Taylor, Alice E.; Parker, David S.; Cao, Huibo B.; McGuire, Michael A.; et al

    2015-12-15

    The structural and the magnetic properties of CeCu6-xAgx (0 ≤ x ≤ 0.85) and CeCu6-xPdx (0 ≤ x ≤ 0.4) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6-xAgx and CeCu6-xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (Pnma) to a monoclinic (P21/c) phase at 240 K. In CeCu6-xAgx, the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈ 0.1. The structural transitionmore » in CeCu6-xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6-xAgx and CeCu6-xPdx, exhibit a magnetic quantum critical point (QCP), at x ≈ 0.2 and x ≈ 0.05, respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ1 0 δ2), where δ1 ~ 0.62, δ2 ~ 0.25, x = 0.125 for CeCu6-xPdx and δ1 ~ 0.64, δ2 ~ 0.3, x = 0.3 for CeCu6-xAgx. As a result, the magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.« less

  13. Mechanical Behavior of Sn-3.0Ag-0.5Cu/Cu Solder Joints After Isothermal Aging

    NASA Astrophysics Data System (ADS)

    Nguyen, Van Luong; Chung, Chin-Sung; Kim, Ho-Kyung

    2016-01-01

    The tensile impact behavior of lead-free Sn-3Ag-0.5Cu/Cu solder joints aged at 413 K and 453 K for times ranging from 24 h to 1000 h has been investigated in this study. The activation energy for growth of the intermetallic compound (IMC) layer was estimated and compared with literature values. Additionally, the tensile strength of solder joints with IMC thickness of 17.6 μm was found to be more sensitive to the strain rate as compared with solder joints with thinner IMC layers. Equations representing the relationships among the effective stress, strain rate, aging time, and aging temperature as well as IMC thickness were established using matrix laboratory (MATLAB) software. These equations show that the tensile strength decreases with increase in the IMC thickness to about 8 μm, after which it becomes nearly constant when the IMC thickness is between approximately 8 μm and 14 μm, before decreasing significantly when the IMC thickness exceeds 14 μm. The main reason for these characteristics was excessive increase in the IMC thickness of solder joints, causing a change in the stress concentration of the tensile load from the protruding region to the inside of the IMC layer at the same tested strain rate.

  14. Primary Phase Field of the Pb-Doped 2223 High-Tc Superconductor in the (Bi, Pb)-Sr-Ca-Cu-O System

    PubMed Central

    Wong-Ng, W.; Cook, L. P.; Kearsley, A.; Greenwood, W.

    1999-01-01

    Both liquidus and subsolidus phase equilibrium data are of central importance for applications of high temperature superconductors in the (Bi, Pb)-Sr-Ca-Cu-O system, including material synthesis, melt processing and single crystal growth. The subsolidus equilibria of the 110 K high-Tc Pb-doped 2223 ([Bi, Pb], Sr, Ca, Cu) phase and the location of the primary phase field (crystallization field) have been determined in this study. For the quantitative determination of liquidus data, a wicking technique was developed to capture the melt for quantitative microchemical analysis. A total of 29 five-phase volumes that include the 2223 phase as a component was obtained. The initial melt compositions of these volumes range from a mole fraction of 7.3 % to 28.0 % for Bi, 11.3 % to 27.8 % for Sr, 1.2 % to 19.4 % for Pb, 9.8 % to 30.8 % for Ca, and 17.1 % to 47.0 % for Cu. Based on these data, the crystallization field for the 2223 phase was constructed using the convex hull technique. A section of this “volume” was obtained by holding two components of the composition at the median value, allowing projection on the other three axes to show the extent of the field.

  15. A colorimetric assay for measuring iodide using Au@Ag core-shell nanoparticles coupled with Cu(2+).

    PubMed

    Zeng, Jingbin; Cao, Yingying; Lu, Chun-Hua; Wang, Xu-Dong; Wang, Qianru; Wen, Cong-Ying; Qu, Jian-Bo; Yuan, Cunguang; Yan, Zi-Feng; Chen, Xi

    2015-09-01

    Au@Ag core-shell nanoparticles (NPs) were synthesized and coupled with copper ion (Cu(2+)) for the colorimetric sensing of iodide ion (I(-)). This assay relies on the fact that the absorption spectra and the color of metallic core-shell NPs are sensitive to their chemical ingredient and dimensional core-to-shell ratio. When I(-) was added to the Au@Ag core-shell NPs-Cu(2+) system/solution, Cu(2+) can oxidize I(-) into iodine (I2), which can further oxidize silver shells to form silver iodide (AgI). The generated Au@AgI core-shell NPs led to color changes from yellow to purple, which was utilized for the colorimetric sensing of I(-). The assay only took 10 min with a lowest detectable concentration of 0.5 μM, and it exhibited excellent selectivity for I(-) over other common anions tested. Furthermore, Au@Ag core-shell NPs-Cu(2+) was embedded into agarose gels as inexpensive and portable "test strips", which were successfully used for the semi-quantitation of I(-) in dried kelps. PMID:26388386

  16. Novel PdAgCu ternary alloy as promising materials for hydrogen separation membranes: Synthesis and characterization

    NASA Astrophysics Data System (ADS)

    Tarditi, Ana M.; Cornaglia, Laura M.

    2011-01-01

    The use of the sequential electroless plating method allowed us to obtain the PdAgCu ternary alloy on top of dense stainless steel (SS) 316 L disks. The XRD analysis indicated that initially the nucleation of the two phases of the alloy (FCC and BCC) takes place, but the FCC/BCC ratio increases with the annealing time at 500 °C in H 2 stream. After 162 h, the film contained only the FCC phase, which presents promising properties to be applied in the synthesis of hydrogen selective membranes. SEM cross-section results showed that a dense, continuous, defect-free film was deposited on top of the SS support, and the EDS data indicated that no significant gradient was present on the thickness of the film. XPS and LEIS allowed us to determine that Cu and Ag surface segregation takes place after annealing up to 500 °C/5 days. In the top-most surface layer, Ag enrichment takes place as determined by ARXPS experiments which can be the result of the lower surface tension of Ag compared to that of Cu and Pd. Increasing the annealing temperature results in an increase of the Ag surface segregation while the Cu concentration in the top-most surface layer decreases.

  17. Tuning of Ag doped core-shell ZnO NWs/Cu2O grown by electrochemical deposition

    NASA Astrophysics Data System (ADS)

    Makhlouf, Houssin; Messaoudi, Olfa; Souissi, Ahmed; Ben Assaker, Ibtissem; Oueslati, Mihrez; Bechelany, Mikhael; Chtourou, Radhouane

    2015-09-01

    ZnO nanowires (NWs)/Cu2O-Ag core-shell nanostructures (NSs) have been synthesized by electrochemical deposition method on ITO-coated glass substrates in order to improve the efficiency of the type-II transition of core-shell ZnO NWs/Cu2O-Ag NSs. The morphologies of the obtained NSs were studied by scanning electron microscopy confirming the presence of core-shell NSs. The crystalline proprieties were analyzed by x-ray diffraction and micro-Raman measurement: wurtzite ZnO and cuprit Cu2O phase were founded. The presence of Ag content in core-shell NS was detected by EDX. Optical measurement reveals an additional contribution δE at about 1.72 eV attributed to the type-II interfacial transition between the valance band of cuprit-Cu2O and the conduction band of W-ZnO. The effect of the Ag doping into the type-II transition was investigated. A red shift of the type-II transition was detected according to the Ag concentration. These materials could have potential applications in photocatalytic and photovoltaic fields.

  18. The geology of the carbonate-hosted Blende Ag-Pb-Zn deposit, Wernecke Mountains, Yukon, Canada

    NASA Astrophysics Data System (ADS)

    Moroskat, Micheal; Gleeson, Sarah A.; Sharp, R. J.; Simonetti, A.; Gallagher, C. J.

    2015-01-01

    The Ag-Zn-Pb Blende deposit is located in the Wernecke Mountains, Yukon and is hosted by the middle Proterozoic Gillespie Lake Group dolomitic siltstones. The sulphide mineralization is localized within the axial planar cleavage of a kilometre-scale anticline and is dominated by galena- and sphalerite-cemented mosaic, rubble and crackle breccias with minor pyrite, galena, sphalerite and dolomite veins. 206Pb/204Pb values from galena range from 16.355 to 16.600, 207Pb/204Pb from 15.430 to 15.461, and 208Pb/204Pb from 36.016 to 36.283, respectively, and yield model ages between 1,490 and 1,430 Ma. A hydrothermal alteration zone, which is younger than the mineralization, has a poorly constrained U-Pb monazite age of 1,307 ± 180 Ma, which suggests that the Blende deposit is Proterozoic in age. Dolomites associated with the main- and late-stage mineralization have δ13C values that range from -1.8 to 0.9 ‰ and δ18O values of 15.7 to 21.9 ‰. The total range of δ34S values from pyrite, galena and sphalerite is 9.4 to 58.1 ‰, indicating that the sulphur in the deposit was derived from reduction of seawater sulphate in a closed system. Strontium isotopes suggest there were three fluids involved in the Blende mineralizing system: Fluid 1 was derived from seawater and formed carbonate and quartz veins pre-mineralization; it has an 87Sr/86Sr ratio of 0.70948. Fluid 2 has a high 87Sr/86Sr ratio of 0.73866, and fluid 3 has a Sr isotopic ratio of 0.71602. Fluids 1 and 3 have similar isotopic compositions but different total Sr ion signals (a function of concentration). This suggests that fluids 1 and 3 may have ultimately been derived from Proterozoic seawater but have undergone different amounts of water-rock interaction. The isotopic and geochemical data suggest the mineralization formed when a H2S-rich fluid derived from seawater (fluid 3) mixed with a metal-bearing fluid (fluid 2) in the high permeability zones of the axial planar cleavage. The Blende deposit is an

  19. Structural and optical properties of (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin film alloys

    SciTech Connect

    Boyle, J. H.; Shafarman, W. N.; Birkmire, R. W.; McCandless, B. E.

    2014-06-14

    The structural and optical properties of pentenary alloy (Ag,Cu)(In,Ga)Se{sub 2} polycrystalline thin films were characterized over the entire compositional range at a fixed (Cu + Ag)/(In + Ga) ratio. Films deposited at 550 °C on bare and molybdenum coated soda-lime glass by elemental co-evaporation in a single-stage process with constant incident fluxes exhibit single phase chalcopyrite structure, corresponding to 122 spacegroup (I-42d) over the entire compositional space. Unit cell refinement of the diffraction patterns show that increasing Ag substitution for Cu, the refined a{sub o} lattice constant, (Ag,Cu)-Se bond length, and anion displacement increase in accordance with the theoretical model proposed by Jaffe, Wei, and Zunger. However, the refined c{sub o} lattice constant and (In,Ga)-Se bond length deviated from theoretical expectations for films with mid-range Ag and Ga compositions and are attributed to influences from crystallographic bond chain ordering or cation electronegativity. The optical band gap, derived from transmission and reflection measurements, widened with increasing Ag and Ga content, due to influences from anion displacement and cation electronegativity, as expected from theoretical considerations for pseudo-binary chalcopyrite compounds.

  20. Removal of Cd, Cu, Pb, and Zn from aqueous solutions by biochars.

    PubMed

    Doumer, M E; Rigol, A; Vidal, M; Mangrich, A S

    2016-02-01

    Sorption and desorption of heavy metals (Cd, Cu, Pb, and Zn) was evaluated in biochars derived from sugarcane bagasse (SB), eucalyptus forest residues (CE), castor meal (CM), green coconut pericarp (PC), and water hyacinth (WH) as candidate materials for the treatment of contaminated waters and soils. Solid-liquid distribution coefficients depended strongly on the initial metal concentration, with K d,max values mostly within the range 10(3)-10(4) L kg(-1). For all biochars, up to 95 % removal of all the target metals from water was achieved. The WH biochar showed the highest K d,max values for all the metals, especially Cd and Zn, followed by CE (for Cd and Pb) and PC (for Cd, Pb, and Zn). Sorption data were fitted satisfactorily with Freundlich and linear models (in the latter case, for the low concentration range). The sorption appeared to be controlled by cationic exchange, together with specific surface complexation at low metal concentrations. The low desorption yields, generally less than 5 %, confirmed that the sorption process was largely irreversible and that the biochars could potentially be used in decontamination applications. PMID:26438367

  1. Stabilization of Pb and Cu in contaminated soils using (nano)oxides - a preliminary study

    NASA Astrophysics Data System (ADS)

    Komárek, Michael; Michálková, Zuzana; Vaněk, Aleš

    2013-04-01

    Chemical stabilization techniques (the application of various stabilizing amendments, which by chemical means reduces contaminant mobility, bioavailability and bioaccessibility) have shown to be possible less destructive alternatives to conventional remediation options. Most stabilization techniques aim at rendering less available the metal(loid) fractions that can pose significant environmental and/or toxicological risks and protecting the functionality of the soil environment. Nano-particulate oxides (particle size of 1-100 nm) are important scavengers of contaminants in soils and due to their reactive and relatively large specific surface area, engineered oxide nanoparticles are promising materials for the remediation of soils contaminated with inorganic pollutants. However, studies assessing the efficiency of these amendments in contaminated soils are still rather scarce. Therefore, the aim of this work is to evaluate the stabilization efficiency of four (nano)oxides (maghemite, magnetite, gibbsite and amorphous Mn oxide (AMO)) in two soils contaminated with Cu (400 mg/kg; pH 3.6) and Pb (1500 mg/kg; pH 5.5), respectively, using chemical extraction methods (CaCl2, EDTA and the BCR sequential extraction) and direct sampling of soil solution using rhizons. The results suggest that the application of the oxides did not influence the pH of the soils, with the only exception of the AMO, which increased the pH and resulted into the formation of MnCO3 on the oxide surface (data from SEM and XRD). Additionally, the high reactivity of the oxides led to increased DOC concentrations originating from the dissolved soil organic matter, especially in the case of the AMO. The AMO was also the most efficient stabilizing amendment for Cu (most significant decrease in Cu in soil solution, in the exchangeable fraction and CaCl2/EDTA extracts), promoted by the pH increase. Despite their lower particle size, maghemite, magnetite and gibbsite were less efficient; although partial

  2. Variability in the fractionation of Cu, Ag, and Zn among cytosolic proteins in the bivalve Macoma balthica

    USGS Publications Warehouse

    Johansson, C.; Cain, Daniel J.; Luoma, Samuel N.

    1986-01-01

    Gel filtration chromatographs of cytosols from the clam Macorna balthica analysed from both field and laboratory treated specimens showed that uptake of Cu, Ag, and Zn in the metallothionein-like protein (MLP) pool follows exposure both in nature and in the laboratory. Specimens collected from San Francisco Bay over 18 mo showed strong temporal variability in the fractionation of the metals among cytosolic proteins. A marked increase in Cu, Ag, and Zn in a very low molecular weight pool occurred when concentrations were highest In the MLP pool. The correlation between total cytosollc metal and MLP-metal also appeared to approach a hyperbolic character at the highest concentrations.

  3. Trace metals (Co, Ni, Cu, Cd, and Pb) in the southern East/Japan Sea

    NASA Astrophysics Data System (ADS)

    Kang, Jeongwon; Choi, Man-Sik; Jeong, Kap-Sik; Lee, Chang-Bok

    2014-03-01

    Total dissolvable metals (Co, Ni, Cu, Cd, and Pb) in both surface waters and the water columns were acquired in the southern East/Japan Sea during a cruise around the Ulleung Basin in June 2001 to understand the spatial distributions of the metals. Concentrations in offshore surface waters were found to be Co 60 ± 12 pM, Ni 2.16 ± 0.25 nM, Cu 1.85 ± 0.55 nM, Cd 0.134 ± 0.018 nM, and Pb 155 ± 40 pM. Spatial distributions in surface waters showed that metal levels were generally enhanced at coastal sites in both Korea and Japan, where the metal distributions indicated complex patterns due to inputs, biogeochemical processes, and physical factors including upwelling. The Co distributions in the water columns seemed to be influenced predominantly by surface and bottom inputs, scavenged rather than regenerated at depth. For Cd, there was generally good agreement between the Cd and PO4 depth distributions, in agreement with the literature. The Cd/PO4 ratio from the water columns was found to be 0.133-0.203, lower than that in other marginal seas (e.g. the East/South China Seas and the Philippine Sea) of the western Pacific Ocean; this might be a result of the fast ventilation rate in this sea. The vertical Pb profile showed typical scavenged-type behavior with a surface maximum and deep minimum. From a comparison of inputs from the atmosphere and the Tsushima Warm Current, atmospheric deposition is substantial enough that it cannot be ignored, and its role in metal cycling is more significant in the offshore zone.

  4. High-T(c) superconducting films of Bi-Pb-Sr-Ca-Cu oxide prepared by plasma spraying

    NASA Astrophysics Data System (ADS)

    Yoshida, Yuji; Kitahara, Shigeru; Togano, Kazumasa; Yuyama, Michinari; Inoue, Kiyoshi

    1989-04-01

    Superconducting properties and microstructures of the Bi-Pb-Sr-Ca-Cu oxide films prepared by plasma spraying have been studied. Films with a thickness of about 150 microns have been prepared from Bi(1.52)Pb(0.48)Sr(1.66)Ca(1.18)Cu(2.31)O(x) powders. The as-sprayed films, deposited on nickel substrate, are amorphous and not superconductive. After annealing in air at 840 C the films exhibit a zero-resistance temperature of 107 K (zero field) with a transition width of about 11 K.

  5. Cu-Zn-Pb multi isotopic characterization of a small watershed (Loire river basin, France)

    NASA Astrophysics Data System (ADS)

    Desaulty, A. M.; Millot, R.; Perret, S.; Bourrain, X.

    2015-12-01

    Combating metal pollution in surface water is a major environmental, public health and economic issue. Knowledge of the behavior of metals, such as copper (Cu), zinc (Zn) and lead (Pb) in sediments and dissolved load, is a key factor to improve the management of rivers. Recent advances in mass spectrometry related to the development of MC-ICPMS allow to analyze the isotopic composition of these elements, and previous studies show the effectiveness of isotopic analyses to determine the anthropogenic sources of pollution in environment. The goal of this study is to use the Cu-Zn-Pb multi-isotopic signature to track the pollutions in surface water, and to understand the complex processes causing the metals mobilization and transport in environment. More particularly we investigate the mechanisms of distribution between the dissolved load and particulate load, known to play an important role in the transport of metals through river systems. As case study, we chose a small watershed, poorly urbanized in the Loire river basin. Its spring is in a pristine area, while it is only impacted some kilometers further by the releases rich in metals coming from a hospital water treatment plant. First a sampling of these liquid effluents as well as dissolved load and sediment from upstream to downstream was realized and their concentrations and isotopic data were determined. Then to simulate a lot of potential natural and anthropogenic modifications of environmental conditions, we made sequential extraction protocol using various reagents on the sediments. Isotopic analyzes were performed also on the various extracting solutions. Isotopic ratios were measured using a Neptune MC-ICPMS at the BRGM, after a protocol of purification for Zn and Cu. The results showed that, these isotopic systematics reveal important informations about the mechanists of mobilization and transport of metals through river systems. However experiments performed under laboratory conditions will be necessary

  6. Improved galvanic replacement growth of Ag microstructures on Cu micro-grid for enhanced SERS detection of organic molecules.

    PubMed

    Guo, Tian-Long; Li, Ji-Guang; Sun, Xudong; Sakka, Yoshio

    2016-04-01

    Galvanic growth of Ag nano/micro-structures on Cu micro-grid was systematically studied for surface-enhanced Raman scattering (SERS) applications. Detailed characterizations via FE-SEM and HR-TEM showed that processing parameters, (reaction time, Ag(+) concentration, and PVP addition) all substantially affect thermodynamics/kinetics of the replacement reaction to yield substrates of significantly different microstructures/homogeneities and thus varied SERS performances (sensitivity, enhancement factor, and reproducibility) of the Ag substrates in the detection of R6G analyte. PVP as an additive was shown to notably alter nucleation/growth behaviors of the Ag crystals and promote the deposition of dense and uniform Ag films of nearly monodisperse polyhedrons/nanoplates through suppressing dendrites crystallization. Under optimized synthesis (50mM of Ag(+), 30s of reaction, and 700 wt.% of PVP), Ag substrates exhibiting a high Raman signal enhancement factor of ~1.1 × 10(6) and a low relative standard deviation of ~0.13 in the repeated detection of 10 μM R6G were obtained. The facile deposition and excellent performance reported in this work may allow the Ag microstructures to find wider SERS applications. Moreover, growth mechanisms of the different Ag nano/micro-structures were discussed based on extensive FE-SEM and HR-TEM analysis. PMID:26838829

  7. Experimental determination of nonequilibrium transport parameters reflecting the competitive sorption between Cu and Pb in slag-sand column.

    PubMed

    Chung, Jaeshik; Kim, Young-Jin; Lee, Gwanghun; Nam, Kyoungphile

    2016-07-01

    Competitive sorption and resulting nonequilibrium transport of Cu and Pb were investigated using slag as a primary sorbent. A series of estimation models were applied based on the equilibrium, and nonequilibrium sorption respectively, and finally calibrated by incorporating the experimentally determined batch kinetic data. When applied individually, the behavior of metals in slag-sand column were well predicted by both equilibrium and nonequilibrium models in CXTFIT code. However, coexisting Cu and Pb exhibited competition for sorption sites, generating an irregular breakthrough curves such as overshoot (higher concentration in effluent than the feed concentration) of Cu and corresponding earlier peak of Pb followed by gradual re-rising. Although two-site nonequilibrium model further considers coupled hydrochemical process, desorption of the Cu from competition made the model prediction inaccurate. However, the parameter estimation could be improved by incorporating the experimentally determined mass transfer rate, ωexp from batch kinetics. Based on the calibrated model, the fraction of instantaneous retardation, βexp of Pb decreased from 0.41 in the single system to 0.30 in the binary system, indicating the shift from equilibrium to nonequilibrium state, where which of Cu increased from 0.39 to 0.94, representing the shift towards equilibrium. The modified results were also compared with five-step sequential extraction data, confirming that the shift of particular metal fractions from the competition triggered the nonequilibrium transport. PMID:27060642

  8. Chemical Stability of (Ag,Cu)2Se: a Historical Overview

    NASA Astrophysics Data System (ADS)

    Brown, David R.; Day, Tristan; Caillat, Thierry; Snyder, G. JeffREY

    2013-07-01

    Recent work on Cu2- x Se has caused strong interest in this material due to its high reported peak zT (1.5) and the reduction of thermal conductivity through the mechanism of liquid-like suppression of heat capacity. In the 1960s, 3M patented Cu1.97Ag0.03Se as "TPM-217." Over the following decade it was tested and developed by the 3M Corporation, at the National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory, Teledyne Energy Systems, and the General Atomics Corporation for use as a next-generation thermoelectric material. During these tests, extreme problems with material loss through Se vaporization and chemical reactions between the material and the device contacts were found. These problems were especially severe while operating under conditions of high iL/A. As a result, the material system was abandoned. The results of these reports are discussed. A simple test of degradation of Cu2Se under conditions of applied current and thermal gradient was performed and showed results compatible with the work done by General Atomics.

  9. Microstructural evolution during aging of an Al-Cu-Li-Ag-Mg-Zr alloy

    NASA Technical Reports Server (NTRS)

    Kumar, K. S.; Brown, S. A.; Pickens, Joseph R.

    1991-01-01

    Alloys in the Al-Cu-Li Ag-Mg subsystem were developed that exhibit desirable combinations of strength and ductility. These Weldalite (trademark) alloys, are unique for Al-Cu-Li alloys in that with or without a prior cold stretching operation, they obtain excellent strength-ductility combinations upon natural and artificial aging. This is significant because it enables complex, near-net shape products such as forgings and super plastically formed parts to be heat treated to ultra-high strengths. On the other hand, commercial extrusions, rolled plates and sheets of other Al-Cu-Li alloys are typically subjected to a cold stretching operation before artificial aging to the highest strength tempers to introduce dislocations that provide low-energy nucleation sites for strengthening precipitates such as the T(sub 1) phase. The variation in yield strength (YS) with Li content in the near-peak aged condition for these Weldalite (trademark) alloys and the associated microstructures were examined, and the results are discussed.

  10. Geochronology, fluid inclusions and isotopic characteristics of the Chaganbulagen Pb-Zn-Ag deposit, Inner Mongolia, China

    NASA Astrophysics Data System (ADS)

    Li, Tiegang; Wu, Guang; Liu, Jun; Wang, Guorui; Hu, Yanqing; Zhang, Yunfu; Luo, Dafeng; Mao, Zhihao; Xu, Bei

    2016-09-01

    The large Chaganbulagen Pb-Zn-Ag deposit is located in the Derbugan metallogenic belt of the northern Great Xing'an Range. The vein-style orebodies of the deposit occur in the NWW-trending fault zones. The ore-forming process at the deposit can be divided into three stages: an early quartz-pyrite-arsenopyrite-pyrrhotite-sphalerite-galena-chalcopyrite stage, a middle quartz-carbonate-pyrite-sphalerite-galena-silver-bearing minerals stage, and a late quartz-carbonate-pyrite stage. The sericite sample yielded a 40Ar -39Ar plateau age of 138 ± 1 Ma and an isochron age of 137 ± 3 Ma, and the zircon LA-ICP-MS U-Pb age of monzogranite porphyry was 143 ± 2 Ma, indicating that the ages of mineralization and monzogranite porphyry in the Chaganbulagen deposit should be the Early Cretaceous, and that the mineralization should be slightly later than the intrusion of monzogranite porphyry. There are only liquid inclusions in quartz veins of the Chaganbulagen deposit. Homogenization temperatures, densities, and salinities of the fluid inclusions from the early stage are 261-340 °C, 0.65-0.81 g/cm3, and 0.7-6.3 wt.% NaCl eqv., respectively. Fluid inclusions of the middle stage have homogenization temperatures, densities, and salinities of 209-265 °C, 0.75-0.86 g/cm3, and 0.5-5.7 wt.% NaCl eqv., respectively. For fluid inclusions of the late stage, their homogenization temperatures, densities, and salinities are 173-219 °C, 0.85-0.91 g/cm3, and 0.4-2.7 wt.% NaCl eqv., respectively. The ore-forming fluids of the deposit are generally characterized by moderate temperature and low salinity and density, and belong to an H2O-NaCl ± CO2 ± CH4 system. The δ18Owater values calculated for ore-bearing quartz vary from - 17.9‰ to - 10.8‰, and the δDV-SMOW values from bulk extraction of fluid inclusion waters vary from - 166‰ to - 127‰, suggesting that the ore-forming fluids consist dominantly of meteoric water. The δ34SV-CDT values range from 1.4‰ to 4.1‰. The 206Pb/204

  11. Anomalous temperature-dependent Young's modulus of a cast LAST (Pb-Sb-Ag-Te) thermoelectric material

    SciTech Connect

    Ren, Fei; Case, Eldon D; Timm, Edward J; Lara-Curzio, Edgar; Trejo, Rosa M

    2010-01-01

    Thermomechanical characterization is important to material evaluation and device design in the development of thermoelectric technology. In this study, we utilize the resonant ultrasound spectroscopy (RUS) technique to examine the elastic behavior of a cast LAST (Pb Sb Ag Te) material with a composition of Ag0.86Pb19Sb1.0Te20 between room temperature and 823 K. The temperature-dependent Young s modulus exhibits a monotonically decreasing trend with increasing temperature. However, an abnormal slope change in the Young s modulus temperature curve around 500 K is observed. In addition, hysteresis between heating and cooling data in the temperature range of 450 550 K is observed, which appears to be dependent on the heating/cooling rate during the RUS experiments such that the hysteresis disappears when the heating/cooling rate was decreased from 5 to 2 K min 1. In this study we propose an order disorder transition model for the anomalous temperature-dependent Young s modulus behavior observed in this study.

  12. Pb, Cu, and Zn distributions at humic acid-coated metal-oxide surfaces

    NASA Astrophysics Data System (ADS)

    Wang, Yingge; Michel, F. Marc; Choi, Yongseong; Eng, Peter J.; Levard, Clement; Siebner, Hagar; Gu, Baohua; Bargar, John R.; Brown, Gordon E.

    2016-09-01

    Mineral surfaces are often coated by natural organic matter (NOM), which has a major influence on metal-ion sorption and sequestration because of the abundance of binding sites in such coatings and the changes they cause in local nanoscale environments. The effects of NOM coatings on mineral surfaces are, however, still poorly understood at the molecular level due to the complexity of these systems. In this study, we have applied long-period X-ray standing wave-fluorescence yield (LP-XSW-FY) spectroscopy to measure the partitioning of naturally present Cu(II) (0.0226%), Zn(II) (0.009%), and Pb(II) (∼0.0004%) between Elliott Soil Humic Acid (ESHA) coatings and three model single-crystal metal-oxide substrates: α-Al2O3 (0 0 0 1), α-Al2O3 (1 -1 0 2), and α-Fe2O3 (0 0 0 1). The competitive sorption effects among these metal ions for binding sites in the ESHA coatings and on the metal-oxide surfaces were investigated as a function of reaction time, calcium content, and solution pH. Pb(II) ions present in the ESHA coatings were found to redistribute to reactive α-Al2O3 (1 -1 0 2) and α-Fe2O3 (0 0 0 1) surfaces after 3 h of reaction (pH = 6.0, [Ca(II)] = 2 mM). Pb(II) partitioning onto these reactive metal-oxide surfaces increased with increasing reaction time (up to 7 d). In addition, the partitioning of Cu(II) and Zn(II) from the ESHA coating to the α-Fe2O3 (0 0 0 1) substrate increased slightly with reaction time (2.4% and 3.7% for Cu(II) and Zn(II), respectively, after 3 h and 6.4% and 7.7% for Cu(II) and Zn(II), respectively, after 72 h of reaction time). However, no changes in the partitioning of Cu(II) and Zn(II) onto the α-Al2O3 (1 -1 0 2) surface were observed with increasing reaction time, suggesting that these ions strongly complex with functional groups in the ESHA coatings. Similar results were obtained for Cu(II) and Zn(II) on the ESHA-coated α-Al2O3 (1 -1 0 2) surfaces in samples without the addition of calcium. However, the amounts of Pb

  13. Immobilization of Pb and Cu in polluted soil by superphosphate, multi-walled carbon nanotube, rice straw and its derived biochar.

    PubMed

    Rizwan, Muhammad Shahid; Imtiaz, Muhammad; Huang, Guoyong; Chhajro, Muhammad Afzal; Liu, Yonghong; Fu, Qingling; Zhu, Jun; Ashraf, Muhammad; Zafar, Mohsin; Bashir, Saqib; Hu, Hongqing

    2016-08-01

    Lead (Pb) and copper (Cu) contamination in croplands pose severe health hazards and environmental concerns throughout soil-food chain transfer. In the present study, BCR, TCLP, CaCl2, and SBET techniques were employed to evaluate the simultaneous effectiveness of rice straw (RS) and its derived biochar (BC), multiwall carbon nanotube (MWCNT), and single superphosphate (SSP) to immobilize the Pb and Cu in co-contaminated soil. The BCR sequential extraction results suggested that with increasing BC and SSP amount, the acid-soluble fractions decreased while oxidizable and residual proportions of Pb and Cu were increased significantly. Compared to SSP, the application of BC amendment substantially modified partitioning of Cu from easily exchangeable phase to less bioavailable residual bound fraction. The immobilized Pb and Cu were mainly transformed to reducible forms. The TCLP and CaCl2-extracted Pb and Cu were reduced significantly by the addition of BC compared to RS and MWCNT, whereas the bio-accessibility of Pb significantly reduced with RS addition. SSP showed better results for Pb immobilization while marginal for Cu in co-contaminated soil. Overall, the addition of BC offered the best results and could be effective in both Pb and Cu immobilization thereby reducing their mobility and bioavailability in the co-contaminated soil. PMID:27121017

  14. Effect of the addition of industrial by-products on Cu, Zn, Pb and As leachability in a mine sediment.

    PubMed

    Rodríguez-Jordá, M Paz; Garrido, Fernando; García-González, M Teresa

    2012-04-30

    A series of incubation and leaching experiments were performed to assess the feasibility of three industrial by-products (red gypsum (RG), sugar foam (SF) and ashes from the combustion of biomass (ACB)) to reduce the leachability of Cu, Pb, Zn and As in a sediment of São Domingos mine (Portugal). The changes in the element solid phase speciation were also evaluated by applying a sequential extraction procedure. All amendments significantly reduced the leachability of Zn and Cu, whereas the treatment with RG+SF+ACB also decreased the mobility of As. The reduction in Cu leachability was especially remarkable. This could be due to the great affinity of carbonates (included in SF and SF+ACB amendments) to precipitate with Cu, and maghemite and rutile (RG amendment) for acting as relevant sorbents for Cu. Pb was the least mobile element in the sediment and none of the treatments reduced its mobility. The sequential extraction reveals that the amendments induced a significant decrease in the concentration of elements associated with the residual fraction. Cu, Pb and As are redistributed from the residual fraction to the Al, Fe, and Mn hydr(oxides) fraction and Zn from the residual fraction to the water/acid soluble, exchangeable and bound to carbonates pool. PMID:22341746

  15. Sn-Ag-Cu to Cu joint current aging test and evolution of resistance and microstructure

    NASA Astrophysics Data System (ADS)

    Xu, Di Erick; Chow, Jasper; Mayer, Michael; Jung, Jae Pil; Yoon, Jong Hyun

    2015-11-01

    SAC 305 solder bump with 800 μm diameter were produced and soldered to a custom substrate with Cu lines as leads that allow for resistance measurement during current aging. The measured joint resistance values (leads plus solder bump) before aging are 7.7 ± 1.8 mΩ and 11.8 ± 2.8 mΩ at room temperature and 160°C, respectively. In general, the resistance of the solder joint increases instantly by about 1 mΩ, when subjected to a 2.2 A aging current at 160°C. The increase is gradual in the following hours of aging and more drastic as it approaches the final failure. Four stages are identified in the resistance signal curve and compared with observations from cross sections. The stages are IMC growth, crack formation and propagation, intermittent crack healing-forming, and final failure resulting in an open connection at the cathode. Recently a periodical drop and rise behavior was reported for the resistance signal. This behavior is reproduced and attributed to the intermittent crack healing-forming stage. The healing events observed are faster than the sampling time. Possibly, as current is concentrated when bypassing interfacial cracks, local melting occurs partially filling cracks before resolidifying. [Figure not available: see fulltext.

  16. Electron configuration and charge state of electrically active Cu, Ag and Au ions in ZnSe

    NASA Astrophysics Data System (ADS)

    Nedeoglo, N. D.; Sirkeli, V. P.; Nedeoglo, D. D.; Laiho, R.; Lähderanta, E.

    2006-08-01

    The Hall effect, electrical conductivity and electron mobility are investigated at temperatures between 55 and 500 K in n-ZnSe crystals doped with Cu, Ag or Au. The presence of a small amount of Cu atoms leads to an inversion of the sign of the Hall coefficient at temperatures above 300 K. Anomalous temperature dependence of the electron mobility is observed in the samples with low Cu concentration (<0.3 at.% in the melt). Different characters of the temperature dependences of kinetic coefficients are found for n-ZnSe doped with Ag and Au. These curves are typical for crystals having several donor levels at different energetic depths. Immediately after doping, silver behaves like a usual compensating acceptor impurity while gold shows amphoteric properties. We propose a model that explains the anomalies of the temperature dependences of the kinetic coefficients in Cu-doped crystals and the lack of the anomalies in Ag-doped and Au-doped crystals. In accordance with this model and our experimental data, copper in n-ZnSe has two charge states, CuZn+ (d10) and CuZn2+ (d9), and two acceptor levels near the valence band. Silver and gold exist in single-charged states AgZn+ and AuZn+ with d10 electron configuration forming single energy levels near the valence band. Au atoms form mainly interstitial Aui donors at low doping concentrations and substitutional AuZn and AuZn-based acceptors at high doping concentrations. Time stimulation of the amphoteric properties of Ag is discussed.

  17. The Drenchwater deposit, Alaska: An example of a natural low pH environment resulting from weathering of an undisturbed shale-hosted Zn-Pb-Ag deposit

    USGS Publications Warehouse

    Graham, G.E.; Kelley, K.D.

    2009-01-01

    The Drenchwater shale-hosted Zn-Pb-Ag deposit and the immediate vicinity, on the northern flank of the Brooks Range in north-central Alaska, is an ideal example of a naturally low pH system. The two drainages, Drenchwater and False Wager Creeks, which bound the deposit, differ in their acidity and metal contents. Moderately acidic waters with elevated concentrations of metals (pH ??? 4.3, Zn ??? 1400 ??g/L) in the Drenchwater Creek drainage basin are attributed to weathering of an exposed base-metal-rich massive sulfide occurrence. Stream sediment and water chemistry data collected from False Wager Creek suggest that an unexposed base-metal sulfide occurrence may account for the lower pH (2.7-3.1) and very metal-rich waters (up to 2600 ??g/L Zn, ??? 260 ??g/L Cu and ???89 ??g/L Tl) collected at least 2 km upstream of known mineralized exposures. These more acidic conditions produce jarosite, schwertmannite and Fe-hydroxides commonly associated with acid-mine drainage. The high metal concentrations in some water samples from both streams naturally exceed Alaska state regulatory limits for freshwater aquatic life, affirming the importance of establishing base-line conditions in the event of human land development. The studies at the Drenchwater deposit demonstrate that poor water quality can be generated through entirely natural weathering of base-metal occurrences, and, possibly unmineralized black shale.

  18. The origin of skarn beds, Ryllshyttan Zn-Pb-Ag + magnetite deposit, Bergslagen, Sweden

    NASA Astrophysics Data System (ADS)

    Jansson, Nils F.; Allen, Rodney L.

    2011-11-01

    Thin- to medium-bedded, stratiform calc-silicate deposits (banded skarns) are a peculiar, but important, component of the supracrustal successions in the Palaeoproterozoic Bergslagen mining district of central Sweden. They are referred to as "skarn-banded leptites" in the literature and are common in areas and at stratigraphic levels that contain iron oxide and base metal sulphide deposits. The stratigraphic hanging wall of the stratabound Ryllshyttan Zn-Pb-Ag + magnetite deposit at Garpenberg, contains approximately 100-150 m of interbedded aluminous skarn beds and rhyolitic ash-siltstones. The skarn beds are mineralogically variable and dominantly composed of grandite, spessartine, epidote, actinolite, quartz, clinopyroxene, and locally magnetite. Integrated field-mapping, and whole-rock lithogeochemical, microscopic and mineral chemical analyses suggest that the stratiform skarn beds are the products of at least two discrete hydrothermal events and subsequent metamorphism. The first event comprised accumulation in a quiescent subaqueous environment, below wave base, of calcareous and ferruginous sediments rich in Fe, Mn, Ca, and Mg. These chemical sediments were deposited concurrently with rhyolitic ash-silt sedimentation, thus forming a (now metamorphosed) laminated calcareous Fe formation with both a detrital rhyolitic component and rhyolitic siltstone interbeds. Positive Eu-anomalies and negative Ce-anomalies for normalized rare earth element analyses of skarn beds suggest that the iron may have been derived from exhalation of hot and reduced hydrothermal fluids, which upon mixing with more oxidized seawater, precipitated Fe oxides and/or carbonates that settled from suspension to the seafloor. The size of the positive Eu-anomalies of the chemical sediments are modified by the content of rhyolitic volcaniclastic material, which has a negative Eu anomaly, such that positive Eu-anomalies are only observed in skarn beds that possess a minor volcaniclastic

  19. Chemically twinned phases in the Ag 2S-PbS-Bi 2S 3 system.Part I. Electron microscope study

    NASA Astrophysics Data System (ADS)

    Skowron, A.; Tilley, R. J. D.

    1990-04-01

    Phases in the PbS-rich region of the Ag 2S-PbS-Bi 2S 3 system have been studied by high resolution transmission electron microscopy. In samples quenched from the melt or melted and annealed at 773 or 973 K a number of new chemically twinned phases have been found. Their structures contain galena-like slabs four-, five-, seven-, and eight-octahedra wide, joined along twin planes. Ordered phases predominate in the PbS-rich region of the phase diagram, while both ordered and disordered intergrowths occur in the PbS-poor region. The role of Ag in stabilizing slabs of galena-like material five- and eight-octahedra wide and its function in the formation of these twinned phases is discussed.

  20. Understanding nanostructures in thermoelectric materials: an electron microscopy study of AgPb{sub 18}SbSe{sub 20} crystals.

    SciTech Connect

    Lioutas, C. B.; Frangis, N.; Todorov, I.; Chung, D. Y.; Kanatzidis, M. G.; Materials Science Division; Aristotle Univ. Thessaloniki; Northwestern Univ.

    2010-01-01

    The characterization and understanding of the presence of nanostructuring in bulk thermoelectric materials requires real space atomic level information. We report electron diffraction and high-resolution transmission electron microscopy studies of crystals of the system AgPb{sub 18}SbSe{sub 20} (=18PbSe + AgSbSe{sub 2}) which reveal that this system is nanostructured rather than a solid solution. Nanocrystals of varying sizes are found, endotaxially grown in the matrix of PbSe (phase A), and consist of two phases, a cubic one (phase B) and a tetragonal one (phase C). Well-defined coherent interfaces between the phases in the same nanocrystals are observed. On the basis of the results of combined electron crystallography techniques, we propose reasonable structural models for the phases B and C. There are significant differences in the nanostructuring chemistry between AgPb{sub 18}SbSe{sub 20} and the telluride analog AgPb{sub 18}SbTe{sub 20} (LAST-18).

  1. The Effects of Adding Elements of Zinc and Magnesium on Ag-Cu Eutectic Alloy for Warming Acupuncture

    PubMed Central

    Park, Il Song; Kim, Keun Sik; Lee, Min Ho

    2013-01-01

    The warming acupuncture for hyperthermia therapy is made of STS304. However, its needle point cannot be reached to a desirable temperature due to heat loss caused by low thermal conductivity, and the quantification of stimulation condition and the effective standard establishment of warming acupuncture are required as a heat source. Accordingly, in this study, after Ag-Cu alloys with different composition ratios were casted and then mixed with additives to improve their physical and mechanical properties, the thermal conductivity and biocompatibility of the alloy specimens were evaluated for selecting suitable material. Ag-Cu binary alloys and ternary alloys added 5 wt% Zn or 2 wt% Mg were casted and then cold drawn to manufacture needles for acupuncture, and their physical properties, thermal conductivity, and biocompatibility were evaluated for their potential use in warming acupuncture. The results of this study showed that the physical and mechanical properties of the Ag-Cu alloys were improved by additives and that the thermal conductivity, machinability, and biocompatibility of the Ag-Cu alloys were improved by Mg addition. PMID:24078827

  2. Ag-Cu nanoalloyed film as a high-performance cathode electrocatalytic material for zinc-air battery.

    PubMed

    Lei, Yimin; Chen, Fuyi; Jin, Yachao; Liu, Zongwen

    2015-01-01

    A novel Ag50Cu50 film electrocatalyst for oxygen reduction reaction (ORR) was prepared by pulsed laser deposition (PLD) method. The electrocatalyst actually is Ag-Cu alloyed nanoparticles embedded in amorphous Cu film, based on transmission electron microscopy (TEM) characterization. The rotating disk electrode (RDE) measurements provide evidence that the ORR proceed via a four-electron pathway on the electrocatalysts in alkaline solution. And it is much more efficient than pure Ag catalyst. The catalytic layer has maximum power density of 67 mW cm(-2) and an acceptable cell voltage at 0.863 V when current densities increased up to 100 mA cm(-2) in the Ag50Cu50-based primary zinc-air battery. The resulting rechargeable zinc-air battery exhibits low charge-discharge voltage polarization of 1.1 V at 20 mAcm(-2) and high durability over 100 cycles in natural air. PMID:25977668

  3. Localized surface plasmon behavior of Ag-Cu alloy nanoparticles stabilized by rice-starch and gelatin

    SciTech Connect

    Singh, Manish Kumar; Mandal, R. K.; Manda, Premkumar; Singh, A. K.

    2015-10-15

    The purpose of this communication was to understand localized surface plasmon behavior of a series of Ag-Cu alloy nanoparticles capped by rice-starch and gelatin. The structures of dried powders were investigated with the help of X-ray diffraction. The analysis revealed Ag-rich and Cu-rich phases with maximum solid solubility of Cu ∼9 atom per cent; 8 atom per cent and Ag ∼ 16 atom per cent; 14 atom per cent in rice-starch and gelatin capped samples respectively. Transmission electron microscope was used for knowing the particle size as well as to supplement FCC phase formations of Ag-rich and Cu-rich solid phases arrived at based on X-ray diffraction studies. The UV-Vis spectra of sols were examined for the formation and stability of alloy nanoparticles. The temporal evolution of LSPR curves gave us to assert that the sol is stable for more than two months. Small angle X-ray scattering in the sol state was extensively utilized to understand nature of suspensions in terms of fractals. Such a study is important for having a correlation between LSPR behaviors with those of nanoparticle dispersion in aqueous media. It is believed that this work will be a contribution to the emerging field of plasmonics that include applications in the area of photophysical processes and photochemical reactions.

  4. Localized surface plasmon behavior of Ag-Cu alloy nanoparticles stabilized by rice-starch and gelatin

    NASA Astrophysics Data System (ADS)

    Singh, Manish Kumar; Manda, Premkumar; Singh, A. K.; Mandal, R. K.

    2015-10-01

    The purpose of this communication was to understand localized surface plasmon behavior of a series of Ag-Cu alloy nanoparticles capped by rice-starch and gelatin. The structures of dried powders were investigated with the help of X-ray diffraction. The analysis revealed Ag-rich and Cu-rich phases with maximum solid solubility of Cu ˜9 atom per cent; 8 atom per cent and Ag ˜ 16 atom per cent; 14 atom per cent in rice-starch and gelatin capped samples respectively. Transmission electron microscope was used for knowing the particle size as well as to supplement FCC phase formations of Ag-rich and Cu-rich solid phases arrived at based on X-ray diffraction studies. The UV-Vis spectra of sols were examined for the formation and stability of alloy nanoparticles. The temporal evolution of LSPR curves gave us to assert that the sol is stable for more than two months. Small angle X-ray scattering in the sol state was extensively utilized to understand nature of suspensions in terms of fractals. Such a study is important for having a correlation between LSPR behaviors with those of nanoparticle dispersion in aqueous media. It is believed that this work will be a contribution to the emerging field of plasmonics that include applications in the area of photophysical processes and photochemical reactions.

  5. Surface plasmon resonance enhancement of the magneto-optical Kerr effect in Cu/Co/Ag/SnO2 structure

    NASA Astrophysics Data System (ADS)

    Ghanaatshoar, Majid; Moradi, Mehrdad; Tohidi, Parsis

    2014-10-01

    In this paper, an Ag ultra thin layer was deposited on the Cu/Co film by thermal evaporation technique in the vacuum. The atomic force microscopy confirms that nanoparticles of Ag were formed on the Co magnetic layer, and subsequently, the longitudinal Kerr signal of Cu/Co/Ag was amplified more than 2 times. This enhancement is resulting from the overlap of the surface plasmon resonance in the silver with the electronic transition in the Co layer. Furthermore, we investigated the effect of transparent semiconductor SnO2 as a cap layer on the magnitude of longitudinal Kerr signal. To obtain the optimal thickness of cap layer, a numerical analysis was carried out using a 4 × 4 characteristic matrix, which takes into account multiple reflections from interfaces within the medium and light transmission through the layers.

  6. Axial anisotropy of intergrain critical current in Bi-Pb-Sr-Ca-Cu-O

    NASA Astrophysics Data System (ADS)

    Umemura, Toshio; Egawa, Kunihiko; Wakata, Mitsunobu; Yoshizaki, Kiyoshi; Ni, Baorong; Matsushita, Teruo

    1990-08-01

    The intergrain critical current densities, J c, parallel and perpendicular to c-axis were measured as a function of the magnetic field at 4.2 and 77.3K by an ac inductive method for the fairly oriented Bi 1.6Pb 0.4Sr 2Ca 2Cu 3O y specimens. The J c's perpendicular to c-axis were higher than those parallel c-axis, about ten times within 5T at 4.2K, and about three times within 0.1T at 77.3K. Our results suggect the orientation of each grain to be especially worthwhile for performing the high J c at the low temperature.

  7. Fabrication and characterization of (Bi,Pb)-Sr-Ca-Cu-O (2223) bars

    SciTech Connect

    Chudzik, M.P.; Polzin, B.J.; Thayer, R.; Picciolo, J.J.; Fisher, B.L.; Lanagan, M.T.

    1996-08-01

    Bulk bars for current lead applications were fabricated from (Bi,Pb)- Sr-Ca-Cu-O (Bi-2223) for low thermal conductivity and high critical current. Bars measuring 17.8 cm in length were made by uniaxially pressing Bi-2223 powder of controlled (1.7/0.34)223 and (1.8/0.4)223 phase composition. The bulk bars were densified by subjecting them to a schedule of alternate liquid-phase sintering and cold isostatic pressing. Liquid phase sintering temperatures were optimized from differential thermal analysis and microstructure morphology. Phase purity and microstructure were evaluated by x-ray diffraction and scanning electron microscopy. Low-resistance silver contacts were applied to the bars by hot-pressing at 820{degrees}C and 3 MPa. Critical current densities {approx} 1000 A/cm{sup 3} (critical currents of 750 A at 77 K in self-field conditions) were achieved.

  8. Immobilisation of Cu, Pb and Zn in Scrap Metal Yard Soil Using Selected Waste Materials.

    PubMed

    Kamari, A; Putra, W P; Yusoff, S N M; Ishak, C F; Hashim, N; Mohamed, A; Isa, I M; Bakar, S A

    2015-12-01

    Immobilisation of heavy metals in a 30-year old active scrap metal yard soil using three waste materials, namely coconut tree sawdust (CTS), sugarcane bagasse (SB) and eggshell (ES) was investigated. The contaminated soil was amended with amendments at application rates of 0 %, 1 % and 3 % (w/w). The effects of amendments on metal accumulation in water spinach (Ipomoea aquatica) and soil metal bioavailability were studied in a pot experiment. All amendments increased biomass yield and reduced metal accumulation in the plant shoots. The bioconcentration factor and translocation factor values of the metals were in the order of Zn > Cu > Pb. The addition of ES, an alternative source of calcium carbonate (CaCO3), has significantly increased soil pH and resulted in marked reduction in soil metal bioavailability. Therefore, CTS, SB and ES are promising low-cost immobilising agents to restore metal contaminated land. PMID:26395356

  9. GEOCHEMICAL PARTITIONING OF PB, ZN, CU, FE, AND MN ACROSS THE SEDIMENT-WATER INFERFACE IN LARGE LAKES

    EPA Science Inventory

    The early diagenetic remobilization of Mn, Fe, Zn, Cu, and Pb was evaluated by studying the geochemical partitioning of the metals among hydromorphic phases (as operationally defined by sequential-chemical extractions) in interfacial sediment (fluff) and in the sediment column, a...

  10. Atomic Mobilities in the Ag-Cu-Sn Face-Centered Cubic Lattice

    NASA Astrophysics Data System (ADS)

    Gierlotka, W.; Chen, Y. H.; Haque, M. A.; Rahman, M. A.

    2012-12-01

    Knowledge of atomic mobilities is necessary to predict the evolution of microstructure. The theoretical description of atomic mobilities is connected to the chemical potentials of the components in a given phase. A new thermodynamic description of the quaternary Ag-Cu-In-Sn system was recently published, and it is clear that a new description of the mobilities is also necessary. Based on the available literature and using Dictra software, optimization of the mobility parameters of silver, copper, and tin in the face-centered cubic phase was carried out. The results were compared with relevant data from literature as well as with our own experimental results. Good agreement between calculations and experiment was obtained.

  11. Low-energy electron elastic scattering from Mn, Cu, Zn, Ni, Ag, and Cd atoms

    SciTech Connect

    Felfli, Z.; Msezane, A. Z.; Sokolovski, D.

    2011-05-15

    Electron elastic total cross sections (TCSs) for ground and excited Mn, Cu, Zn, Ni, Ag, and Cd atoms have been investigated in the electron-impact energy range 0 {<=}E{<=} 1 eV. The near-threshold TCSs for both the ground and excited states of these atoms are found to be characterized by Ramsauer-Townsend minima, shape resonances, and extremely sharp resonances corresponding to the formation of stable bound negative ions. The recently developed Regge-pole methodology where the crucial electron-electron correlations are embedded is employed for the calculations. From close scrutiny of the imaginary parts of the complex angular momenta, we conclude that these atoms form stable weakly bound ground and excited negative ions as Regge resonances through slow electron collisions. The extracted electron binding energies from the elastic TCSs of these atoms are contrasted with the available experimental and theoretical values.

  12. Crystalline monolayer surface of liquid Au-Cu-Si-Ag-Pd: Metallic glass former

    SciTech Connect

    Mechler, S; Yahel, E; Pershan, P S; Meron, M; Lin, B

    2012-02-06

    It is demonstrated by means of x-ray synchrotron reflectivity and diffraction that the surface of the liquid phase of the bulk metallic glass forming alloy Au49Cu26.9Si16.3Ag5.5Pd2.3 consists of a two-dimensional crystalline monolayer phase for temperatures of up to about 50 K above the eutectic temperature. The present alloy as well as glass forming Au82Si18 and Au-Si-Ge alloys containing small amounts of Ge are the only metallic liquids to exhibit surface freezing well above the melting temperature. This suggests that the phenomena of surface freezing in metallic liquids and glass forming ability are related and probably governed by similar physical properties.

  13. Characterization and adsorption performance of Pb(II) on CuO nanorods synthesized by the hydrothermal method

    SciTech Connect

    Arfaoui, Lobna; Kouass, Salah; Dhaouadi, Hassouna; Jebali, Raouf; Touati, Fathi

    2015-10-15

    Highlights: • The nanorods of CuO were synthesized by a hydrothermal route without any surfactant. • X-ray diffraction showed monoclinic structure with space group C{sub 2/c}. • The nanorods show relatively high adsorption capacity for the removal of Pb(II). • The adsorption kinetics could be fitted well by the pseudo-second-order model. • The equilibrium data can be fitted well using the Langmuir isotherm model - Abstract: Copper oxide (CuO) nanorods were synthesized by hydrothermal method. The detailed structural, compositional and optical characterization of this material was also evaluated with XRD, FT-IR, EDS, and UV–vis spectroscopy, which confirmed that the obtained nanorods are well-crystallized CuO and possess good optical properties. SEM and TEM studies revealed that the as-synthesized CuO nanorods are uniform with an average diameter of 17 nm. The adsorption activity of the CuO nanostructures was studied. The adsorption results showed that the CuO nanorods are an effective and efficient adsorbent for the removal of Pb(II) ions. The influence of various operational parameters such as the pH of the solution, the contact time and the initial concentrations were also studied and the results were discussed. The estimated maximum lead ion adsorption capacity of the CuO nanorods was found to be 188.67 mg g{sup −1} at an optimum pH of 6.

  14. The Low-Lying States of AlCu and AlAg

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Partridge, Harry

    1994-01-01

    The singlet and triplet states of AlCu and AlAg below about 32 000/cm are studied using the internally contracted multireference configuration-interaction method. A more elaborate study of the X(sup 1)Sum(sup +) ground state of AlCu is undertaken using extended Gaussian basis sets, including the effect of inner-shell correlation and including a perturbational estimate of relativistic effects. Our best estimate of the spectroscopic constants (r(sub 0), DeltaG(sub 1/2), and D(sub 0)) for the X(sup 1)Sum(sup+) state with the experimental values in parentheses are: 4.416(4.420) a(sub 0), 295 (294) /cm, and 2.318 (2.315) eV. The calculations definitively assign the upper state in the observed transition at 14 892/cm to the lowest (sup 1)Prod state. The calculated spectroscopic constants and radiative lifetime for the (sup 1)Prod state are in good agreement with experiment. The calculations support the tentative assignments of Behm et al. for three band systems observed in the visible region between 25 000 and 28 000 / cm. However, the computed spectroscopic constants are in very poor agreement with those deduced from an analysis of the spectra. Analogous theoretical results for AlAg suggest that the (2)(sup 3)Prod, (3)(sup 3)Prod, and (3)(sup 1)Sum(sup +) states account for the bands observed, but not assigned, by Duncan and co-workers.

  15. Ligand field spectroscopy of Cu(II) and Ag(II) complexes in the gas phase: theory and experiment.

    PubMed

    Puskar, Ljiljana; Cox, Hazel; Goren, Alan; Aitken, Georgina D C; Stace, Anthony J

    2003-01-01

    Ligand field spectra have been recorded in the gas phase for the two series of complexes containing either Cu(II) or Ag(II) in association with pyridine. Where comparisons are possible, the gas phase spectra match those recorded in the condensed phase; however, for Ag(II) systems the results differ in interpretation. The Ag(II) data are attributed to a ligand-to-metal charge transfer process, and the Cu(II) data (spectral region and extinction coefficient) match the characteristics of a d-d transition. A detailed theoretical analysis of two complexes. [Cu(py)4]2+ and [Ag(py)4]2+ provides evidence of a minimum energy, D4h structure and two less stable D2h and D2d structures within approximately 60 kJ mol(-1). From these structures it is possible to identify a range of optically and vibronically allowed transitions that could contribute to spectra observed in the gas phase. In the case of calculations on [Ag(py)4]2+ there is strong evidence of an electronic transition that would account for the observation of charge transfer in the experiments. Less detailed calculations on [Cu(py)6]2+ and [Ag(py)6]2+ show structural evidence of extensive Jahn Teller distortion. Taken together with incremental binding energies calculated for complexes containing between two and six pyridine molecules, these results show that the level of theory adopted is capable of providing a semi-quantitative understanding of the experimental data. PMID:14527220

  16. Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn-Ag-Cu/Cu solder joint during different thermal conditions

    NASA Astrophysics Data System (ADS)

    Tan, Ai Ting; Tan, Ai Wen; Yusof, Farazila

    2015-06-01

    Nanocomposite lead-free solders are gaining prominence as replacements for conventional lead-free solders such as Sn-Ag-Cu solder in the electronic packaging industry. They are fabricated by adding nanoparticles such as metallic and ceramic particles into conventional lead-free solder. It is reported that the addition of such nanoparticles could strengthen the solder matrix, refine the intermetallic compounds (IMCs) formed and suppress the growth of IMCs when the joint is subjected to different thermal conditions such as thermal aging and thermal cycling. In this paper, we first review the fundamental studies on the formation and growth of IMCs in lead-free solder joints. Subsequently, we discuss the effect of the addition of nanoparticles on IMC formation and their growth under several thermal conditions. Finally, an outlook on the future growth of research in the fabrication of nanocomposite solder is provided.

  17. Water pollution by Cu and Pb can adversely affect mallard embryonic development.

    PubMed

    Kertész, Virág; Bakonyi, Gábor; Farkas, Beáta

    2006-09-01

    The effects of heavy metal pollutants on aquatic birds have been widely studied in ecotoxicological investigations; however, the predominant focus has been on the postnatal period of life. Limited information on the adverse effects of metals to bird eggs is available. The possible toxic effects of lead and copper were studied in mallard eggs. After the accidental severe heavy metal pollution of the Tisa river (Hungary) in March 2000, these metals were detected in the highest concentration in both the water and the sediment, reaching far beyond acceptable concentrations. Pb treatment (2.9 mg/L) significantly increased the rate of mortality after a single immersion of the eggs into polluted water for 30 min. The rate of dead embryos significantly increased after the combined exposure to Cu and Pb (0.86 and 2.9 mg/L, respectively) both in the single- (once for 30 min) and in the multiple- (10s daily during first trimester of incubation) immersion groups. It was concluded that elevated metal concentrations similar to those found in the Tisa river after the tailing dam failure may cause toxic effects (mortality and teratogenicity) upon exposure of mallard eggs. PMID:16678261

  18. Mechanical Deformation Behavior of Sn-Ag-Cu Solders with Minor Addition of 0.05 wt.% Ni

    NASA Astrophysics Data System (ADS)

    Hammad, A. E.; El-Taher, A. M.

    2014-11-01

    The aim of the present work is to develop a comparative evaluation of the microstructural and mechanical deformation behavior of Sn-Ag-Cu (SAC) solders with the minor addition of 0.05 wt.% Ni. Test results showed that, by adding 0.05Ni element into SAC solders, generated mainly small rod-shaped (Cu,Ni)6Sn5 intermetallic compounds (IMCs) inside the β-Sn phase. Moreover, increasing the Ag content and adding Ni could result in the change of the shape and size of the IMC precipitate. Hence, a significant improvement is observed in the mechanical properties of SAC solders with increasing Ag content and Ni addition. On the other hand, the tensile results of Ni-doped SAC solders showed that both the yield stress and ultimate tensile strengths decrease with increasing temperature and with decreasing strain rate. This behavior was attributed to the competing effects of work hardening and dynamic recovery processes. The Sn-2.0Ag-0.5Cu-0.05Ni solder displayed the highest mechanical properties due to the formation of hard (Cu,Ni)6Sn5 IMCs. Based on the obtained stress exponents and activation energies, it is suggested that the dominant deformation mechanism in SAC (205)-, SAC (0505)- and SAC (0505)-0.05Ni solders is pipe diffusion, and lattice self-diffusion in SAC (205)-0.05Ni solder. In view of these results, the Sn-2.0Ag-0.5Cu-0.05Ni alloy is a more reliable solder alloy with improved properties compared with other solder alloys tested in the present work.

  19. In vitro chemical and biological effects of Ag, Cu and Cu + Zn adjunction in 46S6 bioactive glasses

    NASA Astrophysics Data System (ADS)

    Bunetel, L.; Wers, E.; Novella, A.; Bodin, A.; Pellen-Mussi, P.; Oudadesse, H.

    2015-09-01

    Three bioactive glasses belonging to the system SiO2-CaO- Na2O-P2O5 elaborated by conventional melt-quenching techniques were doped with silver, copper and copper + zinc. They were characterized using the usual physical methods. Human osteoblast cells Saos-2 and human endothelial cells EAhy926 were used for viability assays and to assess the metallic ions, self toxicity. Human monocyte cells THP-1 were used to measure interleukins IL1β and IL6 release. Glass chemical structures did not vary much on introduction of metal ions. A layer of hydroxyapatite was observed on every glass after 30 days of SBF immersion. A proliferative action was seen on Saos-2 after 24 h of incubation, EAhy926 growth was not affected. For both cell lines, a moderate cytotoxicity was found after 72 h. Dose-dependent toxic effects of Ag, Cu and Zn ions were observed on Saos-2 and EAhy926 cells. Measured CD50 of silver against these two cell lines were 8 to 20 fold lower than copper and zinc’s. Except undoped control glass, all doped glasses tested showed anti-inflammatory properties by preventing IL1β and IL6 excretion by differentiated THP-1. In conclusion, strictly monitored adjunction of metal ions to bioglasses ensures good anti-inflammatory properties without altering their biocompatibility.

  20. Rapid solidification and dendrite growth of ternary Fe-Sn-Ge and Cu-Pb-Ge monotectic alloys

    NASA Astrophysics Data System (ADS)

    Zhang, Xuehua; Ruan, Ying; Wang, Weili; Wei, Bingbo

    2007-08-01

    The phase separation and dendrite growth characteristics of ternary Fe-43.9%Sn-10%Ge and Cu-35.5%Pb-5%Ge monotectic alloys were studied systematically by the glass fluxing method under substantial undercooling conditions. The maximum undercoolings obtained in this work are 245 and 257 K, respectively, for these two alloys. All of the solidified samples exhibit serious macrosegregation, indicating that the homogenous alloy melt is separated into two liquid phases prior to rapid solidification. The solidification structures consist of four phases including α-Fe, (Sn), FeSn and FeSn2 in Fe-43.9%Sn-10%Ge ternary alloy, whereas only (Cu) and (Pb) solid solution phases in Cu-35.5%Pb-5%Ge alloy under different undercoolings. In the process of rapid monotectic solidification, α-Fe and (Cu) phases grow in a dendritic mode, and the transition “dendrite→monotectic cell” happens when alloy undercoolings become sufficiently large. The dendrite growth velocities of α-Fe and (Cu) phases are found to increase with undercooling according to an exponential relation.

  1. The potential pool of Co, Ni, Cu, Pb and Cd organic complexing ligands in coastal and urban rain waters

    NASA Astrophysics Data System (ADS)

    Nimmo, Malcolm; Fones, Gary R.

    The detection of dissolved ACSV (adsorptive cathodic stripping voltammetry) Co, Ni, Cu, Cd and Pb in rain waters collected from an urban and a coastal site in the northwest of England is described. The presence of metal complexing organic ligands in rain waters is indicated with an overall percentage of ACSV non - labile dissolved metal of the total dissolved metal fraction ( = %ACSV nl/t) being 33 (33); 28 (35); 26 (32); 33 (25); 27 (34): for Co, Ni, Cu, Cd and Pb, respectively, for the urban site (and coastal site). ACSV metal lability is theoretically defined and is dependent upon the a-coefficient ( β' MAL [AL]) of the added ACSV ligand (AL). No major differences were observed between %ACSV nl/t metal fractions in rain waters collected at the two contrasting sites for all the metals considered. As Cu, Pb, Cd and Ni had values greater than 10 for their Ef crust (crustal enrichment factor), rain water collected from both sites had predominantly anthropic chemical characteristics. The commonality of the aerosol chemical characteristics at the two sites may account for the observed similar (relative to total metal concentrations) proportions of metal organic complexation at the two different sites. The general order of increasing organic associations was Cu = Pb = Ni < Co < Cd, although the analytical log α-coefficients ( β' MAL [AL]) for each metal were different (9.62—Ni; 9.27—Cu; 5.29—Co; 2.15—Pb; 1.13—Cd). Significant correlations were encountered between ACSV non - labile and total dissolved trace metal concentrations of the pooled data from both sites, again an indication of the similarity of the chemical characteristics of the scavenged soluble organic ligands associated with background aerosol material.

  2. Possible double magnetic phase transition in Dy5CuPb3

    NASA Astrophysics Data System (ADS)

    Tran, V. H.; Gulay, L. D.

    2006-03-01

    We have investigated the magnetic and transport properties of Dy5CuPb3 by magnetic susceptibility, electrical resistivity, magnetoresistance and thermoelectric power measurements. The compound crystallises in the hexagonal Hf5CuSn3-type structure (space group P63/mcm) and probably undergoes two successive magnetic transitions at TC=45.0±0.5 K and TN=6.5±0.5 K. The experimental data are indicative of a ferri- and antiferromagnetic types of the transitions, respectively. We attribute the double magnetic phase transition and the reduction of the magnetisation values at low temperatures to associate with the two non-equivalent magnetic sublattices of the Dy ions. We observed a large magnetoresistance value of -24% at temperatures in between TN and TC. The investigated compound has a negative thermoelectric power of -17 μV/K at 300 K. We interpret the overall behaviour of the S(T)-curve to two different mechanisms: magnetic and charge carrier diffusion.

  3. Preparation of 110K (Bi, Pb)-Sr-Ca-Cu-O superconductor from glass precursor

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.

    1989-01-01

    The Bi1.5Pb0.5Sr2Ca2Cu3O(x) glass, prepared by rapid quenching of the melt, showed T(sub g) of 383 C, crystallization temperature of approx. 446 C, melting temperature of approx. 855 C, and bulk density of 5.69 g/cu. cm. in air. The as-quenched glass was oxygen deficient. On heating in O2, it showed a slow, irreversible, and continuous weight gain starting at approx. 530 C. The influence of annealing conditions on the formation of various phases was investigated by XRD and electrical resistivity measurements. The 110K-T(sub c) phase did not form below 840 C. The amount of this phase increased with the sintering time at 840 C. A sample annealed at 840 C for 243 h in air and furnace cooled showed the highest T(sub c)(R=0) of 107.2K and transition width delta T(sub c)(10 to 90 percent) of approx. 2 K.

  4. Contents and leachability of heavy metals (Pb, Cu, Sb, Zn, As) in soil at the Pantex firing range, Amarillo, Texas.

    PubMed

    Basunia, S; Landsberger, S

    2001-10-01

    Pantex firing range soil samples were analyzed for Pb, Cu, Sb, Zn, and As. One hundred ninety-seven samples were collected from the firing range and vicinity area. There was a lack of knowledge about the distribution of Pb in the firing range, so a random sampling with proportional allocation was chosen. Concentration levels of Pb and Cu in the firing range were found to be in the range of 11-4675 and 13-359 mg/kg, respectively. Concentration levels of Sb were found to be in the range of 1-517 mg/kg. However, the Zn and As concentration levels were close to average soil background levels. The Sn concentration level was expected to be higher in the Pantex firing range soil samples. However, it was found to be below the neutron activation analysis (NAA) detection limit of 75 mg/kg. Enrichment factor analysis showed that Pb and Sb were highly enriched in the firing range with average magnitudes of 55 and 90, respectively. Cu was enriched approximately 6 times more than the usual soil concentration levels. Toxicity characteristic leaching procedure (TCLP) was carried out on size-fractionated homogeneous soil samples. The concentration levels of Pb in leachates were found to be approximately 12 times higher than the U.S. Environmental Protection Agency (EPA) regulatory concentration level of 5 mg/L. Sequential extraction (SE) was also performed to characterize Pb and other trace elements into five different fractions. The highest Pb fraction was found with organic matter in the soil. PMID:11686247

  5. Bi2Sr2CaCu2O8 + x round wires with Ag/Al oxide dispersion strengthened sheaths: microstructure-properties relationships, enhanced mechanical behavior and reduced Cu depletion

    NASA Astrophysics Data System (ADS)

    Kajbafvala, Amir; Nachtrab, William; Wong, Terence; Schwartz, Justin

    2014-09-01

    Ag/Al alloys with various Al content (0.50 wt%, 0.75 wt%, 1.00 wt%, and 1.25 wt%) are made by powder metallurgy and used as the outer sheath material for Bi2Sr2CaCu2O8 + x (Bi2212)/Ag/AgAl multifilamentary round wires (RW). Bi2212/Ag/AgAl RW microstructural, mechanical and electrical properties are studied in various conditions, including as-drawn, after internal oxidation, and after partial melt processing (PMP). The results are compared with the behavior of a Bi2212/Ag/Ag0.20Mg wire of the same geometry. The grains in as-drawn Ag/Al alloys are found to be ˜25% smaller than those in the corresponding Ag/0.20 wt%Mg, but after PMP, the Ag/Al and Ag/0.20 wt%Mg grain sizes are comparable. Tensile tests show that Bi2212/Ag/AgAl green wires have yield strength (YS) of ˜115 MPa, nearly 65% higher than that of Bi2212/Ag/Ag0.20Mg. After PMP, the Bi2212/Ag/AgAl YS is about 35% greater than that of Bi2212/Ag/Ag0.20Mg. Furthermore, Bi2212/Ag/AgAl wires exhibit higher ultimate tensile strength and modulus and twice the elongation-to-failure. Atomic resolution high-angle annular dark-field scanning transmission electron microscopy, high resolution transmission electron microscopy and energy dispersive spectroscopy demonstrate the formation of nanosize MgO and Al2O3 precipitates via internal oxidation. Large spherical MgO precipitates are observed on the Ag grain boundaries of Ag/0.20 wt%Mg alloy, whereas the Al2O3 precipitates are distributed homogenously in the dispersion-strengthened (DS) Ag/Al alloy. Furthermore, it is found that less Cu diffused from the Bi2212 filaments in the Bi2212/Ag/Ag0.75Al wire during PMP than from the filaments in the Bi2212/Ag/Ag0.20Mg wire. These results show that DS Ag/Al alloy is a strong candidate for improved Bi2212 wire.

  6. K-shell ionization cross section for Ti, Fe, Cu, Zr, and Ag

    SciTech Connect

    Benka, O.; Geretschlager, M.

    1981-04-01

    Absolute K-shell ionisation cross sections have been measured for thin targets of Ti, Fe, Cu, Zr and Ag for protons in the energy range 85-790 keV and for thin targets of Ti, Fe and Cu for He ions in the energy range 190-750 keV. In addition the relative variation of the cross sections with energy has been determined with high accuracy. The experimental values are compared to the perturbed stationary state approximation (CPSSR) and the semiclassical approximation (SCA). The CPSSR theory provides the best overall agreement with experimental cross sections. For higher scaled energies the CPSSR theory predicts the energy dependence of the cross sections very well but in the lower energy range it overpredicts the cross sections by as much as a factor of two and this overprediction seems to increase with Z/sub 2/ at a fixed scaled energy y. The SCA theory predicts slightly too large ionisation cross sections except for the lowest pounds values. The relative variation of the cross sections with energy is not well described in either energy range.

  7. Composition and anisotropy in Al-Cu-Li-Ag-Mg-Zr alloys

    SciTech Connect

    Gayle, F.W. . Metallurgy Div.); Tack, W.T.; Swanson, G. ); Heubaum, F.H.; Pickens, J.R. )

    1994-03-15

    Aluminum-lithium alloys that have been hot worked generally suffer from an anisotropy of mechanical properties, both through thickness (surface to centerline) and in plane (from longitudinal to 45[degree] to transverse). Although such anisotropy is present in all tempers, it is more pronounced in the commercially-important, high strength, artificially aged conditions. Yield strength differences between the longitudinal and long transverse orientations ([Delta]YS) of up to 240 MPa for Al-Cu-Li alloy 2090 have been reported. Since minimum properties in all orientations must be considered in applications design, mechanical property anisotropy can limit the use of an alloy. To investigate the role composition plays in the development of mechanical property anisotropy, the authors have examined a range of compositions in the Weldalite[reg sign] 049 alloy family as well as certain model alloys. This novel approach is in contrast to most attempts to reduce anisotropy which have been based on established alloys of relatively narrow composition ranges. In the present study, a baseline aluminum alloy 2195 (4.0 Cu-0.95 Li-0.4 Ag-0.4 Mg-0.14 Zr, in wt.%) with accompanying experimental variants containing 0 to 1.4% Li and 0.4 and 1.2% Mg, were evaluated for tensile property anisotropy, fracture toughness, and microstructure.

  8. A new phase in the Sr sbnd Pb sbnd Cu oxide system: The crystal structure of Sr 5- xPb 3+ xCu yO 12-δ

    NASA Astrophysics Data System (ADS)

    Kim, J. S.; Tang, X. X.; Manthiram, A.; Swinnea, J. S.; Steinfink, H.

    1990-03-01

    A single crystal with compositions Sr 4.79Pb 3.21Cu 0.66O 11.12 was grown from a reaction mixture of nominal composition 2 Pb:1 Sr:1 Cu that was fired at 860°C in air. Mr = 1304.6,hexagonal, P¯62 m, a = 10.072(3)Å, c = 3.542(3)Å, V = 311.2(4)Å 3, Z = 1, Dx = 6.96 g cm -3, λ = 0.71069A˚, μ = 645 cm -1, F(000) = 553.34,room temperature, R = 0.040for 323 unique reflections5σ( Fo).The Pb atoms are in octahedral coordination; the octahedra form a chain parallel to cby edge-sharing. Sr is coordinated by nine oxygen atoms that form a capped trigonal prism. The trigonal prisms form a chain parallel to cby face-sharing. TheSr/Pbsite is surrounded by seven oxygen ions. The polyhedron can be described as a tricapped trigonal prism with one edge of the prism missing. The octahedra and trigonal prisms articulate by corner sharing into a three-dimensional framework. Two crystallographically independent Cu atoms are disordered and occupy tetrahedral interstices. One oxygen site is partially occupied. The presence of Pb 2+ on the Pb site distorts the octahedron by lengthening two bonds to 2.44(3)A˚; the average of the other four bond lengths is 2.137(19)A˚. The Sr sbnd O bond lengths to the six apices of the prism are 2.632(14) and 2.935(3)A˚to the three capping atoms. The disorderedSr/Pb atom site has four oxygen neighbors at 2.544(17)A˚, two at 2.621(5)A˚, and one at 2.42(2)A˚. The compound is an electrical insulator.

  9. Stabilization of Pb²⁺ and Cu²⁺ contaminated firing range soil using calcined oyster shells and waste cow bones.

    PubMed

    Moon, Deok Hyun; Cheong, Kyung Hoon; Khim, Jeehyeong; Wazne, Mahmoud; Hyun, Seunghun; Park, Jeong-Hun; Chang, Yoon-Young; Ok, Yong Sik

    2013-05-01

    Pb(2+) and Cu(2+) contamination at army firing ranges poses serious environmental and health risks to nearby communities necessitating an immediate and prompt remedial action. In this study, a novel mixture of calcined oyster shells (COSs) and waste cow bones (WCBs) was utilized to immobilize Pb(2+) and Cu(2+) in army firing range soils. The effectiveness of the treatment was evaluated based on the Korean Standard leaching test. The treatment results showed that Pb(2+) and Cu(2+) immobilization in the army firing range soil was effective in significantly reducing Pb(2+) and Cu(2+) leachability upon the combined treatment with COS and WCB. A drastic reduction in Pb(2+) (99%) and Cu(2+) leachability (95%) was obtained as compared to the control sample, upon treatment with 5 wt.% COS and 5 wt.% WCB. The combination treatment of COS and WCB was more effective for Pb immobilization, than the treatment with COS or WCB alone. The 5 wt.% COS alone treatment resulted in 95% reduction in Cu(2+) leachability. The SEM-EDX results suggested that Pb(2+) and Cu(2+) immobilization was most probably associated with the formation of ettringite, pozzolanic reaction products and pyromorphite-like phases at the same time. PMID:23478128

  10. Photocatalytic removal of M(2+) (Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+) and Ag(+)) over new catalyst CuCrO(2).

    PubMed

    Ketir, W; Bouguelia, A; Trari, M

    2008-10-30

    The metal ions M(2+) (Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+) and Ag(+)) are potentially toxic. Their electro deposition has been carried out in aqueous air-equilibrated CuCrO(2) suspension upon visible illumination. The delafossite CuCrO(2) is p-type semiconductor characterized by a low band gap (1.28 eV) and a long-term chemical stability. The corrosion rate is found to be 10(-2) micromol m(-2)month(-1) in aqua regia. The oxide has been elaborated through nitrate route where the specific surface area is increased via the surface/bulk ratio. A correlation exists between the dark M(2+) adsorption, the redox potential of M(2+/0) couple and the conduction band of CuCrO(2) positioned at -1.06 V(SCE). Ag(+) cannot be photoreduced because of its positive potential located far above the valence band. By contrast, Zn(2+) is efficiently deposited due to the large driving force at the interface. The improved photoactivity of copper with a deposition percentage (90%) is attributed to the strong dark adsorption onto the surface catalyst. The results indicate a competitive effect with the water reduction; it has been observed that the M(2+) deposition goes parallel with the hydrogen evolution. Such behavior is attributed to the low H(2) over voltage when ultra fine aggregate of M islands are photodeposited onto CuCrO(2) substrate. PMID:18384943

  11. Accelerated Bonding of Magnesium and Aluminum with a CuNi/Ag/CuNi Sandwich Interlayer by Plasma-Activated Sintering

    NASA Astrophysics Data System (ADS)

    Wang, Yiyu; Rao, Mei; Li, Leijun; Luo, Guoqiang; Shen, Qiang; Zhang, Lianmeng

    2016-02-01

    Plasma-activated sintering (PAS) has been applied, for the first time, to join magnesium and aluminum using a CuNi/Ag/CuNi sandwich structural interlayer. A cleaning effect and high efficient plasma heating mode in PAS have contributed to forming a strong interfacial diffusion bond under low temperature 673 K (400 °C) and short dwell time (0.6 ks). The designed interlayer provides a diffusion barrier effect and an enhanced physical contact between the interfaces. Strong bonding has been achieved without forming the brittle Mg-Al intermetallics.

  12. Qualitative analysis of black stone and its application for detecting Ag and Pb in liquid sample by laser-induced breakdown spectroscopy (LIBS)

    NASA Astrophysics Data System (ADS)

    Suyanto, Hery

    2016-03-01

    The aim of this research is to characterize black stone and also to know the capability to adsorb Ag and Pb elements in solution. All analysis in this research used laser-induced breakdown spectroscopy (commercial LIBS) method with laser energy of 120 mJ, accumulation 4, gate delay 1 µs and air surrounding gas at 1 atmosphere. Before soaked in 20 ml solution containing Ag and Pb of 40 ppm in 1 hour, the stone was analyzed by LIBS and it contains the main elements such as Ca, Mn, Si, K, Fe, Mg, Mo, H, O and Na until 16 laser shots. However, after immersed in solution, the stone contains impurities Ag and Pb elements with signal to noise ratio (SNR) of 9.5 and 1.2 respectively. Based on this data, the stone is predicted to be able to adsorb Ag element in solution till 12.7 ppm. The data also show that Ag element was adsorbed homogenously by stone till 16th laser shots, although it was washed with flowing demineralized water before it was analyzed.

  13. Characterization of the (Ag,Cu)(In,Ga)Se2 thin film alloy system for solar cells

    NASA Astrophysics Data System (ADS)

    Boyle, Jonathan

    Energy is the underlying factor to human economic activity, and more energy is projected to be needed in the near future and photovoltaics provide a means to supply that energy. Results presented in this dissertation detail material properties of the (Ag,Cu)(In,Ga)Se2 thin film alloy system for use as a solar cell material. Structural and optical properties were determined via X-ray diffraction and UV/Vis/NIR spectrophotometry, respectively. Structural data was analyzed using JADE 2010 software and optical data was analyzed via two different methods. Results of Ag substitution into Cu(In,Ga)Se2 alloy were reconciled with the Jaffe-Wei-Zunger (JWZ) theoretical model, which relates structural and chemical properties of Cu-based ternary chalcopyrite alloys to their optical properties. Dominant phase of the alloy system was identified as chalcopyrite I-42d, Space group 122, with minor secondary phases and order defect phases. No chalcopyrite-chalcopyrite miscibility gap was present in the alloy compositional space, counter to prior literature on bulk polycrystalline materials and thermodynamic calculations performed here, indicating that Ag was successfully substituted into the chalcopyrite lattice. Lattice constant results were consistent with JWZ model, where a O lattice constant closely follows Vegard's rule, cO lattice constant changes at different rates than aO does with composition, and anion displacement is affected by cation radii. Optical results showed bandgap widening with Ag and Ga substitution across the full compositional space, with bowing parameters shown overall to be invariant with cation substitution, counter to expectations. (Ag+Cu)/(In+Ga) ratio effect on bandgap for a limited set of samples is consistent with p-d hybridization effects from JWZ model.

  14. Influence of growth direction on the microstructure of unidirectionally solidified Cu Pb monotectic alloy using zone-melt technique

    NASA Astrophysics Data System (ADS)

    Aoi, Ichiro; Ishino, Makoto; Yoshida, Makoto; Fukunaga, Hideharu; Nakae, Hideo

    2001-02-01

    The influence of growth direction on the monotectic structure of the Cu-Pb alloy is studied. In order to examine the influence under a 1 g environment, both the upward (opposite to the direction of gravity) and downward (the direction of gravity) unidirectional solidifications (UDS) are carried out. In the case of the upward UDS, a banded structure, which consists of Pb-rich and Cu-rich layers, is observed. The L 2 droplets pile up in front of the solid/liquid interface. On the other hand, in the downward UDS, the irregularly shaped L 2 phase uniformly disperses in the specimen and no banded structure is found. The gravity macrosegregation of the L 2 liquid is observed at the bottom of the molten alloy in the downward solidified specimen. This is caused by the difference in the density between the L 1 and L 2 phases. Furthermore, a mechanism for the formation of a banded structure is suggested. This mechanism suggests that the coalesced L 2 phase covers the solid/liquid interface by producing a Pb-rich layer that permits an increase in the undercooling of the L 1/L 2 interface compared to the monotectic temperature. As nucleation of the α-Cu phase occurs on the Pb-rich layer, the coexisting three phases are then restored. The temperature at the growth front is also returned to the monotectic temperature. The repetition mentioned above will result in the banded structure found in the upward UDS.

  15. Trace metals (Cd, Pb, Cu, Zn and Ni) in sediment of the submarine pit Dragon ear (Soline Bay, Rogoznica, Croatia)

    NASA Astrophysics Data System (ADS)

    Kljaković-Gašpić, Zorana; Bogner, Danijela; Ujević, Ivana

    2009-08-01

    Vertical profiles of trace metal (Cd, Pb, Zn, Cu, Ni) concentrations, organic matter content, carbonate content and granulometric composition were determined in two sediment cores from the submarine pit Dragon Ear (Middle Adriatic). Concentrations of the analyzed metals (Cd: 0.06-0.12 mg kg-1, Pb: 28.5-67.3 mg kg-1, Zn: 17.0-65.4 mg kg-1, Cu: 21.1-51.9 mg kg-1, Ni: 27.8-40.2 mg kg-1) were in usual range for Adriatic carbonate marine sediments. Nevertheless, concentrations of Cu, Zn, and especially Pb in the upper layer of sediments (top 12 cm) were higher than in bottom layer, while Cd and Ni concentration profiles were uniform. Regression analysis and principal component analysis were used to interpret distribution of trace metals, organic matter and carbonate content in sediment cores. Results of both analysis showed that concentrations of all trace metals in the core below the entrance to the pit were significantly positively correlated with organic matter and negatively correlated with carbonate, while in the core more distant from the entrance only Pb showed significant positive correlation with organic matter. Obtained results indicated that, except for lead which was enriched in surface sediment, in the time of sampling (before the building of the nautical marina) investigated area belonged to unpolluted areas.

  16. Bournonite PbCuSbS3 : Stereochemically Active Lone-Pair Electrons that Induce Low Thermal Conductivity.

    PubMed

    Dong, Yongkwan; Khabibullin, Artem R; Wei, Kaya; Salvador, James R; Nolas, George S; Woods, Lilia M

    2015-10-26

    An understanding of the structural features and bonding of a particular material, and the properties these features impart on its physical characteristics, is essential in the search for new systems that are of technological interest. For several relevant applications, the design or discovery of low thermal conductivity materials is of great importance. We report on the synthesis, crystal structure, thermal conductivity, and electronic-structure calculations of one such material, PbCuSbS3 . Our analysis is presented in terms of a comparative study with Sb2 S3 , from which PbCuSbS3 can be derived through cation substitution. The measured low thermal conductivity of PbCuSbS3 is explained by the distortive environment of the Pb and Sb atoms from the stereochemically active lone-pair s(2) electrons and their pronounced repulsive interaction. Our investigation suggests a general approach for the design of materials for phase-change-memory, thermal-barrier, thermal-rectification and thermoelectric applications, as well as other functions for which low thermal conductivity is purposefully sought. PMID:26330172

  17. Studies of biosorption of Pb2+, Cd2+ and Cu2+ from aqueous solutions using Adansonia digitata root powders.

    PubMed

    Ekere, N R; Agwogie, A B; Ihedioha, J N

    2016-01-01

    The potentials of Adansonia digitata root powders (ADRP) for adsorption of Pb(2+), Cd(2+) and Cu(2+) from aqueous solutions was investigated. Physico-chemical analysis of the adsorbent (ADRP) shows that hydroxyl, carbonyl and amino groups were predominant on the surface of the adsorbent. Scanning Electron Microscope (SEM) image revealed its high porosity and irregular pores in the adsorbent while the Energy Dispersive X-ray Spectrum showed the major element with 53.0% Nitrogen, 23.8% carbon, 9.1% calcium, 7.5% potassium and 6.6% magnesium present. The found optimal conditions were: initial concentration of the metal ions = 0.5 mg/L, pH = 5, contact time = 90 min, adsorbent dose = 0.4 g and particle size = 32 µm. Freundlich isotherm showed good fit for the adsorption of Pb(2+), Cd(2+) and Cu(2+). Dubinin-Radushkevich isotherm revealed that the adsorption processes were physisorption Cd(II) and Cu(II) but chemisorption with respect to Pb(II) ions. The kinetics and thermodynamic studies showed that Pseudo-second order and chemisorptions provided the best fit to the experimental data of Pb (II) ions only. Batch desorption result show that desorption in the acidic media for the metal ions were more rapid and over 90% of the metal ions were recovered from the biomass. PMID:26267780

  18. Effects of Cooling Rate on the Microstructure and Morphology of Sn-3.0Ag-0.5Cu Solder

    NASA Astrophysics Data System (ADS)

    Lee, Hwa-Teng; Huang, Kuo-Chen

    2016-01-01

    This study explored the effect of the cooling rate on the microstructure and morphology of Sn-3.0Ag-0.5Cu (SAC305) lead-free solder. In the experiments, rapid cooling (P1: 63.17°C/s) of SAC305 solder resulted in high tensile strength (60.8 MPa) with no significant loss in ductility (strain >40%) due to the formation of fine-grained primary β-Sn (average size ˜14 μm) surrounded by a network-like fine eutectic structure consisting of β-Sn and particle-like Ag3Sn compound. As the cooling rate was reduced, the morphology of the Ag3Sn compound evolved progressively from a particle- to a needle-like form and finally to a leaf- or plate-like form. The cooling rate significantly affected the β-Sn grain size and the morphology of the Ag3Sn compound. Water cooling (at the fastest cooling rate of 100°C/s) of a solder sample resulted in a microstructure consisting of the finest structure of Ag3Sn and β-Sn with no Cu6Sn5, consequently exhibiting the highest hardness of the various specimens. By contrast, after cooling at the slowest rate of 0.008°C/s, the sample exhibited a coarse eutectic structure consisting of large plate-like Ag3Sn compound and isolated long rod-like Cu6Sn5 precipitates. This coarse structure resulted in both lower hardness and poorer tensile strength.

  19. Hydrogen evolution from water using Ag(x)Cu(1-x)GaSe2 photocathodes under visible light.

    PubMed

    Zhang, Li; Minegishi, Tsutomu; Kubota, Jun; Domen, Kazunari

    2014-04-01

    Photoelectrochemical (PEC) water splitting using CuGaSe2 (CGSe) thin film photocathodes modified by partial substitution of Cu with Ag was investigated. The AgxCu1-xGaSe2 (ACGSe) thin films were deposited onto Mo-coated soda-lime glass substrates by means of co-evaporation using a molecular beam epitaxy (MBE) system. The valence band maximum (VBM) potential of ACGSe is deeper than that of CGSe, and its grain size is greatly increased compared to that of CGSe. A Pt and CdS modified ACGSe electrode (Pt/CdS/ACGSe) with a Ag/(Cu + Ag) ratio of about 5% showed a cathodic photocurrent of 8.1 mA cm(-2) at 0 VRHE and an onset potential of 0.70 VRHE (defined as a cathodic photocurrent of 0.05 mA cm(-2)) under simulated sunlight in a 0.1 M Na2SO4 solution (pH 9.5). Moreover, Pt/CdS/ACGSe exhibited a stable cathodic photocurrent for over 55 h, with no clear decrease. PMID:24562096

  20. Nanocelluloses and their phosphorylated derivatives for selective adsorption of Ag(+), Cu(2+) and Fe(3+) from industrial effluents.

    PubMed

    Liu, Peng; Borrell, Pere Ferrer; Božič, Mojca; Kokol, Vanja; Oksman, Kristiina; Mathew, Aji P

    2015-08-30

    The potential of nanoscaled cellulose and enzymatically phosphorylated derivatives as bio-adsorbents to remove metal ions (Ag(+), Cu(2+) and Fe(3+)) from model water and industrial effluents is demonstrated. Introduction of phosphate groups onto nanocelluloses significantly improved the metal sorption velocity and sorption capacity. The removal efficiency was considered to be driven by the high surface area of these nanomaterials as well as the nature and density of functional groups on the nanocellulose surface. Generally, in the solutions containing only single types of metal ions, the metal ion selectivity was in the order Ag(+)>Cu(2+)>Fe(3+), while in the case of mixtures of ions, the order changed to Ag(+)>Fe(3+)>Cu(2+), irrespective of the surface functionality of the nanocellulose. In the case of industrial effluent from the mirror making industry, 99% removal of Cu(2+) and Fe(3+) by phosphorylated nanocellulose was observed. The study showed that phosphorylated nanocelluloses are highly efficient biomaterials for scavenging multiple metal ions, simultaneously, from industrial effluents. PMID:25867590

  1. High-temperature phase equilibria studies in the Bi-Sr- Ca-Cu-O-Ag system

    NASA Astrophysics Data System (ADS)

    Margulies, Lawrence

    A variety of experimental techniques were utilized to examine the high temperature phase equilibria in the Bi- Sr-Ca-Cu-O-Ag system. Quenching studies were used to determine the liquid solubility of Ag in the Bi2Sr 2CaCu2O8 (Bi2212) melt and the details of the peritectic decomposition pathway of Bi2212 as a function on Ag content and oxygen partial pressure (PO2). A liquid immiscibility region between oxide and Ag liquids in the 8-98 at% range was found above 900°C. Two eutectics were found in the Bi2212-Ag pseudo-binary. On the oxide rich side, a eutectic exists at approximately 4 at% Ag. On the Ag rich side, a eutectic exists at approximately 98 at% Ag at a temperature of 15°C below the melting point of pure Ag. Six distinct solid phases were found to be in equilibrium with the partial melt within the Ag content and PO2 range studied. The stability of these solid phases were found to be highly sensitive to PO2, and to a much lesser extent Ag content. High temperature x-ray diffraction (HTXRD) studies of this system are in conflict with these results. It is suggested that these discrepancies are due to experimental artifacts caused by the significant thermal gradients and lack of full bulk sampling which is inherent in conventional HTXRD designs. In part II, a new furnace design compatible with synchrotron radiation sources is introduced to address these problems. This design allows for full bulk sampling in a low thermal gradient environment using Debye- Scherrer transmission geometry. Sample spinning is also introduced in the design to eliminate preferred orientation and incomplete powder averaging and allow for quantitative phase analysis and structural refinement. Studies on model systems are presented to demonstrate the capabilities for high resolution structural studies (Al 2O3) and time resolved phase transformation studies (SrCO 3). Finally, the Bi2212 system is examined to confirm the quenching results of part I, and to demonstrate the degree to which

  2. Pb solubility of the high-temperature superconducting phase Bi2Sr2Ca2Cu3O(10+d)

    NASA Technical Reports Server (NTRS)

    Kaesche, Stefanie; Majewski, Peter; Aldinger, Fritz

    1995-01-01

    For the nominal composition of Bi(2.27-x)Pb(x)Sr2 Ca2 Cu3 O(10+d) lead content was varied from x = 0.05 to 0.45. The compositions were examined between 830 and 890 C which is supposed to be the temperature range over which the so-called 2223 phase (Bi2Sr2Ca2Cu3O(10+d)) is stable. Only compositions between x = 0.18 to 0.36 could be synthesized in a single phase state. For x is greater than 0.36 a lead containing phase with a stoichiometry of Pb4(Sr,Ca)5CuO(d) is formed, for x is less than 0.18 mainly Bi2Sr2CaCu2O(10+d) and cuprates are the equilibrium phases. The temperature range for the 2223 phase was found to be 830 to 890 C but the 2223 phase has extremely varying cation ratios over this temperature range. Former single phase 2223 samples turn to multi phase samples when annealed at slightly higher or lower temperatures. A decrease in the Pb solubility with increasing temperature was found for the 2223 phase.

  3. Rapid and nondestructive measurement of labile Mn, Cu, Zn, Pb and As in DGT by using field portable-XRF.

    PubMed

    Chen, Zheng; Williams, Paul N; Zhang, Hao

    2013-09-01

    The technique of diffusive gradients in thin films (DGT) is often employed to quantify labile metals in situ; however, it is a challenge to perform the measurements in-field. This study evaluated the capability of field-portable X-ray fluorescence (FP-XRF) to swiftly generate elemental speciation information with DGT. Biologically available metal ions in environmental samples passively preconcentrate in the thin films of DGT devices, providing an ideal and uniform matrix for XRF nondestructive detection. Strong correlation coefficients (r > 0.992 for Mn, Cu, Zn, Pb and As) were obtained for all elements during calibration. The limits of quantitation (LOQ) for the investigated elements of FP-XRF on DGT devices are 2.74 for Mn, 4.89 for Cu, 2.89 for Zn, 2.55 for Pb, and 0.48 for As (unit: μg cm(-2)). When Pb and As co-existed in the solution trials, As did not interfere with Pb detection when using Chelex-DGT. However, there was a significant enhancement of the Pb reading attributed to As when ferrihydrite binding gels were tested, consistent with Fe-oxyhydroxide surfaces absorbing large quantities of As. This study demonstrates the value of the FP-XRF technique to rapidly and nondestructively detect the metals accumulated in DGT devices, providing a new and simple diagnostic tool for on-site environmental monitoring of labile metals/metalloids. PMID:23912422

  4. Gas-phase particle size distributions and lead loss during spray pyrolysis of (Bi,Pb)--Sr--Ca--Cu--O

    SciTech Connect

    Gurav, A.S.; Kodas, T.T.; Joutsensaari, J.; Kauppinen, E.I.; Zilliacus, R.

    1995-07-01

    Gas-phase particle size distributions and lead loss were measured during formation of (Bi,Pb)--Sr--Ca--Cu--O and pure PbO particles by spray pyrolysis at different temperatures. A differential mobility analyzer (DMA) in conjunction with a condensation particle counter (CPC) was used to monitor the gas-phase particle size distributions, and a Berner-type low-pressure impactor was used to obtain mass size distributions and a Berner-type low-pressure impactor was used to obtain mass size distributions and size-classified samples for chemical analysis. For (Bi,Pb)--Sr--Ca--Cu--O, as the processing temperature was raised from 200 to 700 {degree}C, the number average particle size decreased due to metal nitrate decomposition, intraparticle reactions forming mixed-metal oxides and particle densification. The geometric number mean particle diameter was 0.12 {mu}m at 200 {degree}C and reduced to 0.08 and 0.07 {mu}m, respectively, at 700 and 900 {degree}C. When the reactor temperature was raised from 700 and 800 {degree}C to 900 {degree}C, a large number ({similar_to}10{sup 7} no./cm{sup 3}) of new ultrafine particles were formed from PbO vapor released from the particles and the reactor walls. Particles made at temperatures up to 700 {degree}C maintained their initial stoichiometry over the whole range of particle size monitored, however; those made at 800 {degree}C and above were heavily depleted in lead in the size range 0.5--5.0 {mu}m. The evaporative losses of lead oxide from (Bi,Pb)--Sr--Ca--Cu--O particles were compared with the losses from PbO particles to gain insight into the pathways involved in lead loss and the role of intraparticle processes in controlling it.

  5. Copper-based alloys, crystallographic and crystallochemical parameters of alloys in binary systems Cu-Me (Me=Co, Rh, Ir, Cu, Ag, Au, Ni, Pd, Pt)

    NASA Astrophysics Data System (ADS)

    Porobova, Svetlana; Markova, Tat'jana; Klopotov, Vladimir; Klopotov, Anatoliy; Loskutov, Oleg; Vlasov, Viktor

    2016-01-01

    The article presents the results of the analysis of phase equilibrium of ordered phases in binary systems based on copper Cu- Me (where Me - Co, Rh, Ir, Ag, Au, Ni, Pd, Pt) to find correlations of crystallochemical and crystallographic factors. It is established that the packing index in disordered solid solutions in binary systems based on copper is close to the value of 0.74 against the background of an insignificant deviation of atomic volumes from the Zen's law.

  6. The mechanism of N-Ag bonding determined tunability of surface-enhanced Raman scattering of pyridine on MAg (M = Cu, Ag, Au) diatomic clusters.

    PubMed

    Chen, Lei; Gao, Yang; Xu, Haoran; Wang, Zhigang; Li, Zhengqiang; Zhang, Rui-Qin

    2014-10-14

    Binary coinage metal clusters can show a significantly different enhancement in surface-enhanced Raman scattering (SERS) from that of pure element clusters, owing to their tunable surface plasmon resonance energies affected by the composition and atomic ordering. Yet, the tunability by composition requires a deep understanding in order to further optimize the SERS-based detection technique. Here, to fill this deficiency, we conducted detailed analyses of the SERS of pyridine adsorbed through N-Ag bonding on the homonuclear diatomic metal cluster Ag2 and heteronuclear diatomic metal clusters of AuAg and CuAg, as well as the involved charge transfer under an intracluster excitation, based on calculations using time-dependent density functional theory with a short-time approximation for the Raman cross-section. We find that although the SERS enhancements for all complexes can reach the order of 10(3)-10(4), the corresponding wavelengths used for SERS excitation are significantly different. Our molecular orbital analysis reveals that the complexes based on heteronuclear metal clusters can produce varied electronic transitions owing to the polarization between different metal atoms, which tune the SERS enhancements with altered optical properties. Our analyses are expected to provide a theoretical basis for exploring the multi-composition SERS substrates applicable for single molecular detection, nanostructure characterization, and biological molecular identification. PMID:25157565

  7. DEVELOPMENT OF A HIGH-TEMPERATURE CERAMIC BRAZE: ANALYSIS OF PHASE EQUILIBRIA IN THE Pd-Ag-CuOx SYSTEM

    SciTech Connect

    Weil, K. Scott; Darsell, Jens T.

    2006-01-18

    This paper describes the effects of small palladium additions on the phase equilibria in the Ag-CuOx system. Below a concentration of 5 mol%, palladium was found to increase the temperature of the eutectic reaction present in the pseudobinary system, but have little effect on a higher temperature monotectic reaction. However once enough palladium was added to increase the pseudoternary solidus temperature to that of the lower boundary for this three-phase field (~970°C), the lower boundary begins to increase in temperature as well. The addition of palladium also causes the original eutectic point to move to lower silver concentrations, which also causes a convergence of the two new three-phase fields, CuOx + L1 + L2 and CuOx + α + L1. This suggests that with higher palladium concentrations, a peritectic reaction, α + L1 + L2 → CuOx, may eventually be observed in the system.

  8. Reactive flow models of the Anarraaq Zn-Pb-Ag deposit, Red Dog district, Alaska

    USGS Publications Warehouse

    Schardt, C.; Garven, G.; Kelley, K.D.; Leach, D.L.

    2008-01-01

    The Red Dog ore deposit district in the Brooks Range of northern Alaska is host to several high-grade, shale-hosted Zn + Pb deposits. Due to the complex history and deformation of these ore deposits, the geological and hydrological conditions at the time of formation are poorly understood. Using geological observations and fluid inclusion data as constraints, numerical heat and fluid flow simulations of the Anarraaq ore deposit environment and coupled reactive flow simulations of a section of the ore body were conducted to gain more insight into the conditions of ore body formation. Results suggest that the ore body and associated base metal zonation may have formed by the mixing of oxidized, saline, metal-bearing hydrothermal fluids (<200??C) with reducing, HS-rich pore fluids within radiolarite-rich host rocks. Sphalerite and galena concentrations and base metal sulfide distribution are primarily controlled by the nature of the pore fluids, i.e., the extent and duration of the HS- source. Forward modeling results also predict the distribution of pyrite and quartz in agreement with field observations and indicate a reaction front moving from the initial mixing interface into the radiolarite rocks. Heuristic mass calculations suggest that ore grades and base metal accumulation comparable to those found in the field (18% Zn, 5% Pb) are predicted to be reached after about 0.3 My for initial conditions (30 ppm Zn, 3 ppm Pb; 20% deposition efficiency). ?? Springer-Verlag 2008.

  9. Interfacial Reactions of Sn-3.0Ag-0.5Cu Solder with Cu-Mn UBM During Aging

    NASA Astrophysics Data System (ADS)

    Tseng, Chien-Fu; Wang, Kai-Jheng; Duh, Jenq-Gong

    2010-12-01

    Cu under bump metallurgy (UBM) has been widely used in flip-chip technology. The major disadvantages of Cu UBM are fast consumption of copper, rapid growth of intermetallic compounds (IMCs), and easy formation of Kirkendall voids. In this study we added two different contents of Mn (2 at.% and 10 at.%) to Cu UBM by sputtering to modify the conventional Cu metallization. For the higher Mn concentration in the Cu-Mn UBM, a new Sn-rich phase formed between Cu6Sn5 and the Cu-Mn UBM, and cracks formed after aging. For the lower Mn concentration, growth of Cu3Sn and Kirkendall voids was significantly suppressed after thermal aging. Kinetic analysis and x-ray elemental mapping provided evidence that Mn diffusion into Cu3Sn slowed diffusion of Cu in the Cu3Sn layer. The Mn-enriched Cu3Sn layer may serve as a diffusion barrier to reduce the interfacial reaction rate and Kirkendall void formation. These results suggest that Cu-Mn UBM with low Mn concentration is beneficial in terms of retarding Cu pad consumption in solder joints.

  10. Synthesis of Bi.sub.1.8 Pb.sub.0.4 Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x superconductor

    DOEpatents

    Smith, Michael G.

    1996-01-01

    Two-powder processes for the synthesis of superconducting (Bi, Pb)-2223/Ag-clad wires by the oxide-powder-in-the-robe are provided. The first precursor powder, of nominal stoichiometry CaCuO.sub.x, is a solution-synthesized mixture of Ca.sub.0.45 Cu.sub.0.55 O.sub.2 and CaO. Using these oxide precursor mixtures, superconducting tapes with well-aligned grains and reproducible critical current densities J.sub.c in the range of 20,000 to 26,000 A/cm.sup.2 at 75 K in self-field after annealing less than 200 hours were obtained.

  11. Microstructure of screen-printed (Tl 0.5,Pb 0.5)(Sr 0.8,Ba 0.2) 2Ca 2Cu 3O y superconducting films on untextured silver substrate

    NASA Astrophysics Data System (ADS)

    Kim, Bong-Jun; Kim, Hyun-Tak; Matsui, Yoshio; Jeong, Dae-Yong; Deinhofer, Christian; Gritzner, Gerhard

    2007-09-01

    Highly c-axis oriented (Tl 0.5,Pb 0.5)(Sr 0.8,Ba 0.2) 2Ca 2Cu 3O y films with a thickness of ∼1.5 μm and ∼4 μm were prepared by screen printing method on untextured silver substrates. Tl-1223 films have the critical temperatures around 116 K with transition widths, Δ T, of 2 K, The microstructures have been investigated by high-resolution transmission electron microscopy. Tl-1223 film deposited on well-polished Ag substrate shows large single domains in the lateral direction including secondary phases and intergrowth of Tl-1212, 2201 and 1234. From selected area electron diffraction (SAED) pattern, secondary phase is determined as BaCuO 2, which plays an important role in flux pinning to improve magnetic properties. And the relationships between the domain size, alignment and the surface roughness are studied.

  12. Synthesis of Bi{sub 1.8}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} superconductor

    DOEpatents

    Smith, M.G.

    1996-10-29

    Two-powder processes for the synthesis of superconducting (Bi, Pb)-2223/Ag-clad wires by the oxide-powder-in-the-robe are provided. The first precursor powder, of nominal stoichiometry CaCuO{sub x}, is a solution-synthesized mixture of Ca{sub 0.45}Cu{sub 0.55}O{sub 2} and CaO. Using these oxide precursor mixtures, superconducting tapes with well-aligned grains and reproducible critical current densities J{sub c} in the range of 20,000 to 26,000 A/cm{sup 2} at 75 K in self-field after annealing less than 200 hours were obtained. 2 figs.

  13. Efficient enhancement of hydrogen production by Ag/Cu{sub 2}O/ZnO tandem triple-junction photoelectrochemical cell

    SciTech Connect

    Liu, Ying; Ren, Feng Chen, Chao; Liu, Chang; Xing, Zhuo; Liu, Dan; Xiao, Xiangheng; Wu, Wei; Zheng, Xudong; Liu, Yichao; Jiang, Changzhong; Shen, Shaohua; Fu, Yanming

    2015-03-23

    Highly efficient semiconductor photoelectrodes for solar hydrogen production through photocatalytic water splitting are a promising and challenge solution to solve the energy problems. In this work, Ag/Cu{sub 2}O/ZnO tandem triple-junction photoelectrode was designed and prepared. An increase of 11 times of photocurrent is achieved in the Ag/Cu{sub 2}O/ZnO photoelectrode comparing to that of the Cu{sub 2}O film. The high performance of the Ag/Cu{sub 2}O/ZnO film is due to the optimized design of the tandem triple-junction structure, where the localized surface Plasmon resonance of Ag and the hetero-junctions efficiently absorb solar energy, produce, and separate electron-hole pairs in the photocathode.

  14. Studies on mass attenuation coefficients, effective atomic numbers and electron densities for CoCuAg alloy thin film

    NASA Astrophysics Data System (ADS)

    Apaydın, G.; Cengiz, E.; Tıraşoğlu, E.; Aylıkcı, V.; Bakkaloğlu, Ö. F.

    2009-05-01

    The mass attenuation coefficients for the elements Co, Cu and Ag and a thin film of CoCuAg alloy were measured in the energy range 4.029-38.729 keV. Effective atomic numbers and electron densities were calculated by using these coefficients. The energies were obtained by using secondary targets that were irradiated with gamma-ray photons of 241Am. The x-rays were counted by using a Canberra Ultra-LEGe detector with a resolution of 150 eV at 5.9 keV. The results were compared with theoretical calculated values and fairly good agreement was found between them within an average experimental error. The mass attenuation coefficients, effective atomic numbers and electron densities were plotted versus photon energy.

  15. Biosorption of Cu2+, Cd2+, Pb2+, and Zn2+ using dried marine green macroalga Caulerpa lentillifera.

    PubMed

    Pavasant, Prasert; Apiratikul, Ronbanchob; Sungkhum, Vimonrat; Suthiparinyanont, Prateep; Wattanachira, Suraphong; Marhaba, Taha F

    2006-12-01

    The sorption of Cu2+, Cd2+, Pb2+, and Zn2+ by a dried green macroalga Caulerpa lentillifera was investigated. The removal efficiency increased with pH. The analysis with FT-IR indicated that possible functional groups involved in metal sorption by this alga were O-H bending, N-H bending, N-H stretching, C-N stretching, C-O, SO stretching, and S-O stretching. The sorption of all metal ions rapidly reached equilibrium within 20min. The sorption kinetics of these metals were governed by external mass transfer and intraparticle diffusion processes. The sorption isotherm followed the Langmuir isotherm where the maximum sorption capacities was Pb2+>Cu2+>Cd2+>Zn2+. PMID:16330209

  16. Precipitation Hardening and Statistical Modeling of the Aging Parameters and Alloy Compositions in Al-Cu-Mg-Ag Alloys

    NASA Astrophysics Data System (ADS)

    Al-Obaisi, A. M.; El-Danaf, E. A.; Ragab, A. E.; Soliman, M. S.

    2016-04-01

    The addition of Ag to Al-Cu-Mg systems has been proposed to replace the existing high-strength 2xxx and 7xxx Al alloys. The aged Al-Cu-Mg-Ag alloys exhibited promising properties, due to special type of precipitates named Ω, which cooperate with other precipitates to enhance the mechanical properties significantly. In the present investigation, the effect of changing percentages of alloying elements, aging time, and aging temperature on the hardness values was studied based on a factorial design. According to this design of experiments (DOE)—23 factorial design, eight alloys were cast and hot rolled, where (Cu, Mg, and Ag) were added to aluminum with two different levels for each alloying element. These alloys were aged at different temperatures (160, 190, and 220 °C) over a wide range of time intervals from 10 min. to 64 h. The resulting hardness data were used as an input for Minitab software to model and relate the process variables with hardness through a regression analysis. Modifying the alloying elements' weight percentages to the high level enhanced the hardness of the alloy with about 40% as compared to the alloy containing the low level of all alloying elements. Through analysis of variance (ANOVA), it was figured out that altering the fraction of Cu had the greatest effect on the hardness values with a contribution of about 49%. Also, second-level interaction terms had about 21% of impact on the hardness values. Aging time, quadratic terms, and third-level interaction terms had almost the same level of influence on hardness values (about 10% contribution). Furthermore, the results have shown that small addition of Mg and Ag was enough to improve the mechanical properties of the alloy significantly. The statistical model formulated interpreted about 80% of the variation in hardness values.

  17. Growth of periodic nano-layers of nano-crystals of Au, Ag, Cu by ion beam

    NASA Technical Reports Server (NTRS)

    Smith, Cydale C.; Zheng, B.; Muntele, C. I.; Muntele, I. C.; Ila, D.

    2005-01-01

    Multilayered thin films of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/, were grown by deposition. We have previously shown that MeV ion Bombardment of multi-nano-layers of SiO2/AU+ SiO2/ produces Au nanocrystals in the AU+ SiO2 layers. An increased number of nano-layers followed by MeV ion bombardment produces a wide optical absorption band, of which its FWHM depends on the number of nano-layers of SiO2/AU+ SiO2/. We have successfully repeated this process for nano-layers of SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/. In this work we used 5 MeV Si as the post deposition bombardment ion and monitored the location as well as the optical absorption's FWHM for each layered structure using Optical Absorption Photospectrometry. The concentration and location of the metal nano-crystals were measured by Rutherford Backscattering Spectrometry. We will report on the results obtained for nano-layered structures produced by post deposition bombardment of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/ layered systems as well as the results obtained from a system containing a periodic combination of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/.

  18. Precipitation Hardening and Statistical Modeling of the Aging Parameters and Alloy Compositions in Al-Cu-Mg-Ag Alloys

    NASA Astrophysics Data System (ADS)

    Al-Obaisi, A. M.; El-Danaf, E. A.; Ragab, A. E.; Soliman, M. S.

    2016-06-01

    The addition of Ag to Al-Cu-Mg systems has been proposed to replace the existing high-strength 2xxx and 7xxx Al alloys. The aged Al-Cu-Mg-Ag alloys exhibited promising properties, due to special type of precipitates named Ω, which cooperate with other precipitates to enhance the mechanical properties significantly. In the present investigation, the effect of changing percentages of alloying elements, aging time, and aging temperature on the hardness values was studied based on a factorial design. According to this design of experiments (DOE)—23 factorial design, eight alloys were cast and hot rolled, where (Cu, Mg, and Ag) were added to aluminum with two different levels for each alloying element. These alloys were aged at different temperatures (160, 190, and 220 °C) over a wide range of time intervals from 10 min. to 64 h. The resulting hardness data were used as an input for Minitab software to model and relate the process variables with hardness through a regression analysis. Modifying the alloying elements' weight percentages to the high level enhanced the hardness of the alloy with about 40% as compared to the alloy containing the low level of all alloying elements. Through analysis of variance (ANOVA), it was figured out that altering the fraction of Cu had the greatest effect on the hardness values with a contribution of about 49%. Also, second-level interaction terms had about 21% of impact on the hardness values. Aging time, quadratic terms, and third-level interaction terms had almost the same level of influence on hardness values (about 10% contribution). Furthermore, the results have shown that small addition of Mg and Ag was enough to improve the mechanical properties of the alloy significantly. The statistical model formulated interpreted about 80% of the variation in hardness values.

  19. The creation, manipulation and evolution of nanometer-scale structures in the Ag/Cu(111) system

    NASA Astrophysics Data System (ADS)

    York, Mike; Leibsle, Fred; Goedken, Aaron

    2001-03-01

    We demonstrate how we can use scanning tunneling microscopy to create nanometer-scale pits several layers deep on Ag(111) films grown on a Cu(111) substrate. The creation of these pits is accompanied by the formation of multilayer high islands. We also demonstrate the ability to manipulate small one-layer deep pits. In addition, the evolution of the islands and pits is also studied. Images show island and pit coalescence and instances of rapid and gradual decay.

  20. Assessment of the effects of Cr, Cu, Ni and Pb soil contamination by ecotoxicological tests.

    PubMed

    Maisto, Giulia; Manzo, Sonia; De Nicola, Flavia; Carotenuto, Rita; Rocco, Annamaria; Alfani, Anna

    2011-11-01

    This study aimed to assess soil quality by chemical and ecotoxicological investigations and to check the correspondence between soil metal concentrations and ecotoxicity. For these purposes, surface soils collected at four adjacent roadside urban parks and at a former industrial area were characterized for C/N, organic matter content, texture, and pH. Cr, Cu, Ni and Pb, chosen among the most representative soil metal contaminants, were measured as total content and as available and water soluble fractions. In addition, the total concentrations of the investigated metals were used to calculate two chemical indices: the contamination and the potential ecological risk factors. The toxicity of the investigated soils was evaluated by an ecotoxicity test battery carried out on both soil samples (Vibrio fischeri, Heterocypris incongruens and Sinapis alba) and elutriates (Vibrio fischeri, Daphnia magna and Selenastrum capricornutum). The findings, both by the chemical and ecotoxicological approaches, would suggest that the soils with high metal contamination pose ecological risks. On the other hand, moderately metal contaminated soils did not exclude soil ecotoxicity. In fact, toxic effects were also highlighted in soils with low metal content, toxicity being affected by metal availability and soil characteristics. Moreover, the results suggest the importance of using a battery of tests to assess soil ecotoxicity. PMID:21918769

  1. High-density Bi-Pb-Sr-Ca-Cu-O superconductor prepared by rapid thermal melt processing

    SciTech Connect

    Moon, B.M.; Lalevic, B. ); Kear, B.H.; McCandlish, L.E.; Safari, A.; Meskoob, M.

    1989-10-02

    A high quality, dense Bi-Pb-Sr-Ca-Cu-O superconductor has been successfully synthesized by rapid thermal melt processing. Conventionally sintered pellets were melted at 1200 {degree}C, cooled rapidly, and then annealed. As-melted samples exhibited semiconductor behavior, which upon annealing became superconducting at 115 K ({ital T}{sub {ital c}}(zero)=105 K). A detailed study of various processing techniques has been carried out.

  2. Influence of gravity level and interfacial energies on dispersion-forming tendencies in hypermonotectic Cu-Pb-Al alloys

    NASA Technical Reports Server (NTRS)

    Andrews, J. B.; Curreri, P. A.; Sandlin, A. C.

    1988-01-01

    Results on the nondirectional solidification of several hypermonotectic Cu-Pb-Al alloys were obtained aboard NASA's KC-135 zero-gravity aircraft in order to determine the influence of interfacial energies and gravity levels on dispersion-forming tendencies. The Al content was systematially varied in the alloys. The dispersion-forming ability is correlated with gravity level during solidification, the interfacial energy between the immiscible phases, and the tendency for the minority immiscible phase to wet the walls of the crucible.

  3. Valorization of a treated soil via amendments: fractionation and oral bioaccessibility of Cu, Ni, Pb, and Zn.

    PubMed

    Zagury, Gerald J; Rincon Bello, Jhony A; Guney, Mert

    2016-04-01

    The present study aims to transform a treated soil (TS) into a more desirable resource by modifying physico-chemical properties via amendments while reducing toxic metals' mobility and oral bioaccessibility. A hydrocarbon-contaminated soil submitted to treatment (TS) but still containing elevated concentrations of Cu, Ni, Pb, and Zn has been amended with compost, sand, and Al2(SO4)3 to render it usable for horticulture. Characterization and sequential extraction were performed for TS and four amended mixtures (AM1-4). P and K availability and metal bioaccessibility were investigated in TS and AM2. Amendment improved soil properties for all mixtures and yielded a usable product (AM2 20 % TS, 49 % compost, 30 % sand, 1 % Al2(SO4)3) satisfying regulatory requirements except for Pb content. In particular, AM2 had improved organic matter (OM) and cation exchange capacity (CEC), highly increased P and K availability, and reduced total metal concentrations. Furthermore, amendment decreased metal mobile fraction likely to be plant-available (in mg kg(-1), assumed as soluble/exchangeable + carbonates fractions). For AM2, estimated Pb bioavailability decreased from 1.50 × 10(3) mg kg(-1) (TS) to 238 mg kg(-1) (52.4 % (TS) to 34.2 %). Bioaccessible concentrations of Cu, Ni, and Zn (mg kg(-1)) were lower in AM2 than in TS, but there was no significant decrease for Pb. The results suggest that amendment improved soil by modifying its chemistry, resulting in lower metal mobile fraction (in %, for Cu and Zn) and bioaccessibility (in %, for Cu only). Amending soils having residual metal contamination can be an efficient valorization method, indicating potential for reducing treatment cost and environmental burden by rendering disposal/additional treatment unnecessary. Further studies including plant bioavailability are recommended to confirm results. PMID:26969154

  4. Direct determination of Cu, Mn, Pb, and Zn in beer by thermospray flame furnace atomic absorption spectrometry

    NASA Astrophysics Data System (ADS)

    Nascentes, Clésia C.; Kamogawa, Marcos Y.; Fernandes, Kelly G.; Arruda, Marco A. Z.; Nogueira, Ana Rita A.; Nóbrega, Joaquim A.

    2005-06-01

    In this work, thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) was employed for Cu, Mn, Pb, and Zn determination in beer without any sample digestion. The system was optimized and calibration was based on the analyte addition technique. A sample volume of 300 μl was introduced into the hot Ni tube at a flow-rate of 0.4 ml min -1 using 0.14 mol l -1 nitric acid solution or air as carrier. Different Brazilian beers were directly analyzed after ultrasonic degasification. Results were compared with those obtained by graphite furnace atomic absorption spectrometry (GFAAS). The detection limits obtained for Cu, Mn, Pb, and Zn in aqueous solution were 2.2, 18, 1.6, and 0.9 μg l -1, respectively. The relative standard deviations varied from 2.7% to 7.3% ( n=8) for solutions containing the analytes in the 25-50 μg l -1 range. The concentration ranges obtained for analytes in beer samples were: Cu: 38.0-155 μg l -1; Mn: 110-348 μg l -1, Pb: 13.0-32.9 μg l -1, and Zn: 52.7-226 μg l -1. Results obtained by TS-FF-AAS and GFAAS were in agreement at a 95% confidence level. The proposed method is fast and simple, since sample digestion is not required and sensitivity can be improved without using expensive devices. The TS-FF-AAS presented suitable sensitivity for determination of Cu, Mn, Pb, and Zn in the quality control of a brewery.

  5. THE ELECTRONIC STRUCTURE OF AG/CU(100) SURFACE ALLOYS STUDIES BY AUGER-PHOTOELECTRON COINCIDENCE SPECTROSCOPY.

    SciTech Connect

    ARENA,D.A.; BARTYNSKI,R.A.; HULBERT,S.L.

    2001-10-08

    We have measured the Ag and Pd M{sub 5}VV Auger spectrum in coincidence with Ag and Pd 4d{sub 5/2} photoelectrons for the Ag/Cu(100) and Pd/Cu(100) systems, respectively, as a function of admetal coverage. These systems form surface alloys (i.e. random substitutional alloys in the first atomic layer) for impurity concentrations in the 0.1 monolayer range. For these systems, the centroid of the impurity 4d levels is expected to shift away from the Fermi level by {approx}1 eV [Ruban et al., Journal of Molecular Catalysis. A 115 (1997) 421], an effect that should be easily seen in coincidence core-valence-valence Auger spectra. We find that the impurity Auger spectra of both systems shift in a manner that is consistent with d-band moving away from EF. However, the shift for Pd is considerably smaller than expected, and a shift almost absent for Ag. The disagreement between theory and experiment is most likely caused by the neglect of lattice relaxations in the calculations.

  6. Mapping of Cu and Pb Contaminations in Soil Using Combined Geochemistry, Topography, and Remote Sensing: A Case Study in the Le’an River Floodplain, China

    PubMed Central

    Chen, Yiyun; Liu, Yaolin; Liu, Yanfang; Lin, Aiwen; Kong, Xuesong; Liu, Dianfeng; Li, Xiran; Zhang, Yang; Gao, Yin; Wang, Dun

    2012-01-01

    Heavy metal pollution in soil is becoming a widely concerning environmental problem in China. The aim of this study is to integrate multiple sources of data, namely total Cu and Pb contents, digital elevation model (DEM) data, remote sensing image and interpreted land-use data, for mapping the spatial distribution of total Cu and Pb contamination in top soil along the Le’an River and its branches. Combined with geographical analyses and watershed delineation, the source and transportation route of pollutants are identified. Regions at high risk of Cu or Pb pollution are suggested. Results reveal that topography is the major factor that controls the spatial distribution of Cu and Pb. Watershed delineation shows evidence that the streamflow resulting from rainfall is the major carrier of metal pollutants. PMID:22754479

  7. Enhancement of critical currents in (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes.

    SciTech Connect

    Balachandran, U.

    1998-11-11

    The performance of (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub y} (Bi-2223) superconducting tapes in magnetic fields at 77 K is critical for winding this material into high-field magnets. We have recently enhanced the transport current (I{sub c}) of multifilament Ag-clad Bi-2223 tapes in a self-field at 77 K by increasing the packing density of the precursor powder improving the mechanical deformation, optimizing the conductor design, and adjusting the cooling rate. I{sub c} values of >40 A were obtained repeatedly. However, a transport current of 42 A in a self-field declined to 4 A in a 0.2 T magnetic field applied parallel to the c-axis at 77 K. A new composite tape was then fabricated in which a YBa{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} (Y-123) film was deposited on the top of the Ag-sheathed Bi-2223 tape to shield the applied magnetic field and protect the central Bi-2223 filaments. Magnetization measurements showed that the critical current densities of the Y-123-coated, Ag-sheathed Bi-2223 tapes were higher than those of an uncoated tape. These preliminary results may provide the basis for further improving the processing of long-length Bi-2223 tapes for high-field applications.

  8. Ag{sub 2}CuMnO{sub 4}: A new silver copper oxide with delafossite structure

    SciTech Connect

    Munoz-Rojas, David; Subias, Gloria; Fraxedas, Jordi; Martinez, Benjamin; Casas-Cabanas, Montse; Canales-Vazquez, Jesus; Gonzalez-Calbet, Jose; Garcia-Gonzalez, Ester; Walton, Richard I.; Casan-Pastor, Nieves . E-mail: nieves@icmab.es

    2006-12-15

    The use of hydrothermal methods has allowed the synthesis of a new silver copper mixed oxide, Ag{sub 2}CuMnO{sub 4}, the first example of a quaternary oxide containing both elements. It crystallizes with the delafossite 3R structure, thus being the first delafossite to contain both Ag and Cu. Synthesis conditions affect the final particle size (30-500nm). Powder X-ray diffraction Rietveld refinement indicates a trigonal structure (R3-bar m) and cell parameters a=2.99991A and c=18.428A, where Cu and Mn are disordered within the octahedral B positions in the plane and linearly coordinated Ag occupies de A position between layers. X-ray absorption near edge spectroscopy (XANES) for copper and manganese, and XPS for silver evidence +2, +4, and +1 oxidation states. The microstructure consists of layered parts that may form large twins showing 5nm nanodomains. Finally, magnetic measurements reveal the existence of ferromagnetic coupling yielding in-plane moments that align antiferromagnetically at lower temperatures. The singularity of the new phase resides on the fact that is an example of a bidimensional arrangement of silver and copper in an oxide that also shows clear bidimensionality in its physical properties. That is of special relevance to the field of high T{sub c} superconducting oxides, while the ferromagnetic coupling in a bidimensional system deserves itself special attention.

  9. A DFT investigation of the adsorption of iodine compounds and water in H-, Na-, Ag-, and Cu- mordenite

    NASA Astrophysics Data System (ADS)

    Chibani, Siwar; Chebbi, Mouheb; Lebègue, Sébastien; Bučko, Tomáš; Badawi, Michael

    2016-06-01

    The potential use of some cation-exchanged mordenite (H+, Na+, Cu+, and Ag+) as a selective adsorbent for volatile iodine species (ICH3 and I2), which can be released during a nuclear accident together with a steam carrier gas, is investigated using density functional theory. It is found that in the case of Cu-MOR and Ag-MOR, the absolute values of interaction energies of ICH3 and I2 are higher than that of water which indicates that these forms of zeolite could be suitable for selective adsorption of iodine species. In contrast, the H-MOR and Na-MOR are found to be unsuitable for this purpose. A systematic investigation of all adsorption sites allowed us to analyze the structural effects affecting the adsorption behavior. For the Ag-MOR and Cu-MOR zeolites, the iodine compounds are adsorbed preferentially in the large channel of mordenite (main channel) while water prefers the small channel or the side pocket where it forms stronger hydrogen bonds. The factors governing the interaction energies between the cationic sites and the different molecules are analyzed and the important role of van der Waals interactions in these systems is highlighted.

  10. The effect of Zn, Ag and Au substitution for Cu in Finemet on the crystallization and magnetic properties

    NASA Astrophysics Data System (ADS)

    Chau, N.; Hoa, N. Q.; The, N. D.; Vu, L. V.

    2006-08-01

    Soft magnetic ribbons of Finemet compound with Zn, Ag and Au substituted for Cu: Fe 73.5Si 13.5B 9Nb 3Cu 1-xM x (M=Zn, Ag, Au; x=0.5, 1.0) have been fabricated by rapid quenching technique with wheel speeds of 10, 25 and 30 m/s, respectively. The crystallization evolution of samples examined by DSC measurements showed that the high cooling rates make the ribbons in amorphous state whereas the samples with M=Zn; x=0.5, 1.0 showed to be partly crystallized when they fabricated by the wheel speed of 10 m/s. In the case of Zn ( x=0.5, 1.0) and Ag ( x=1.0) substitution there is a sharp peak in the DSC curve corresponding to crystallization of α-Fe(Si) phase. However, the role of Au is similar to that of Cu. Hysteresis loops of as-cast samples exhibited square form which relates to the pinning centers in domain wall displacement. After appropriate annealing, the ultrasoft magnetic properties of studied ribbons are obtained.

  11. Wet chemical synthesis, structural and spectroscopic studies of CuSe-Ag hierarchical sphere and drum-like microporous structure.

    PubMed

    Kumar, Pushpendra; Singh, Jai; Pandey, Mukesh Kumar

    2013-06-01

    Nanostructural self-assembly has become field of intense research activities from both fundamental and technological standpoints to understanding the mechanism of driving forces and finding artificial methods of assembling them into continuous structures without any obstructions. Various exciting and refined examples of nanostructured self-assembly are well documented. In the present manuscript the crystallization process and optical properties of self assembled CuSe-Ag hierarchical microporous sphere and drum-like structures, synthesized by wet chemical method has been investigated. Thus formed structures are accumulated by numerous polyhedral rod-like subunits, and each unit seems to be an incomplete structure of a randomly grown rod. Phase analysis, purity and morphology of the product have been well studied by X-ray diffraction (XRD), photo-luminescent spectroscopy (PL), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). Due to their microporous structures CuSe-Ag could be potential building blocks to construct functional devices like sensing and several other applications. A possible reaction mechanism for the formation of CuSe-Ag has also been proposed. PMID:23557774

  12. A DFT investigation of the adsorption of iodine compounds and water in H-, Na-, Ag-, and Cu- mordenite.

    PubMed

    Chibani, Siwar; Chebbi, Mouheb; Lebègue, Sébastien; Bučko, Tomáš; Badawi, Michael

    2016-06-28

    The potential use of some cation-exchanged mordenite (H(+), Na(+), Cu(+), and Ag(+)) as a selective adsorbent for volatile iodine species (ICH3 and I2), which can be released during a nuclear accident together with a steam carrier gas, is investigated using density functional theory. It is found that in the case of Cu-MOR and Ag-MOR, the absolute values of interaction energies of ICH3 and I2 are higher than that of water which indicates that these forms of zeolite could be suitable for selective adsorption of iodine species. In contrast, the H-MOR and Na-MOR are found to be unsuitable for this purpose. A systematic investigation of all adsorption sites allowed us to analyze the structural effects affecting the adsorption behavior. For the Ag-MOR and Cu-MOR zeolites, the iodine compounds are adsorbed preferentially in the large channel of mordenite (main channel) while water prefers the small channel or the side pocket where it forms stronger hydrogen bonds. The factors governing the interaction energies between the cationic sites and the different molecules are analyzed and the important role of van der Waals interactions in these systems is highlighted. PMID:27369531

  13. Influence of High- G Mechanical Shock and Thermal Cycling on Localized Recrystallization in Sn-Ag-Cu Solder Interconnects

    NASA Astrophysics Data System (ADS)

    Lee, Tae-Kyu; Kim, Choong-Un; Bieler, Thomas R.

    2014-01-01

    The impact of isothermal aging and recrystallized grain structure distribution on mechanical shock and thermal cycling performance of solder joints with 1% and 3% silver content Sn-Ag-Cu interconnects were investigated. Localized recrystallized grain structure distributions were analyzed to identify correlations between the microstructure evolution and shock performance. The results reveal that the shock tolerance depends on the amount of shock energy that can be absorbed during each shock cycle, which depends on microstructural features. Based on the recrystallized grain distribution, additional isothermal aging in 1% silver Sn-Ag-Cu interconnects shows improved shock performance, whereas degraded shock performance was observed in 3% Sn-Ag-Cu interconnects. Using the same grain boundary distribution analysis on thermally cycled samples, relationships between the particle size distribution, localized recrystallized grain structure development, shock, and thermomechanical performance were identified: finer particle spacing is beneficial for thermal cycling as it resists grain boundary generation, while conversely, wider particle spacing facilitates recrystallization and grain boundary mobility that allows Sn to absorb shock energy.

  14. Investigation on NOx adsorption in [M‧]-MAPO-5 (M = Si, Ti; M‧ = Ag, Cu) by density functional theory calculation

    NASA Astrophysics Data System (ADS)

    Liu, Jiexiang; Zhang, Xiaoguang

    2013-01-01

    NO, N2O and NO2 adsorption in [M‧]-MAPO-5 (M = Si, Ti; M‧ = Ag, Cu) models of the modified aluminophosphate molecular sieves was investigated by density functional theory (DFT) method. The equilibrium structural parameters and adsorption energies were obtained and compared. The structural parameters of NO and NO2 in the adsorbed state had a distinct change than that of N2O compared to their free gas state. [M‧]-MAPO-5 was more effective for the activation of NOx molecule compared to [M‧]-AlMOR (M‧ = Ag, Cu) models of the modified mordenite in our previous studies. The adsorption energies data indicated that adsorption strength of NOx followed the decreasing order of NO2 > NO > N2O. And adsorption complexes in η1-N mode were much stabler than that in η1-O mode, which was similar to that in [M‧]-AlMOR. [Cu]-MAPO-5 had a much stronger adsorption for NOx than [Ag]-MAPO-5. And [M‧]-SiMOR had a little stronger adsorption for NOx than [M‧]-TiMOR. Furthermore, the resistance capabilities of [M‧]-MAPO-5 to SO2, H2O and O2 were studied and analyzed. The interaction mechanism of NOx adsorption in [M‧]-MAPO-5 was also discussed by natural bond orbital (NBO) analysis, which was in reasonable agreement with the adsorption interaction strengths.

  15. High Temperature Long-Term Stability of an (Al-Ag-Cu) Three-in-One Multicell

    NASA Astrophysics Data System (ADS)

    Kim, Yong-Gyoo; Yang, Inseok; Joung, Wukchul

    2016-01-01

    In order to investigate the long-term stability of an (Al-Ag-Cu) three-in-one multicell, it was heat-treated at 1100° C, in which all metal samples were in molten state, for 1000 h. Its thermal behavior was tested using a Pt/Pd thermocouple by inducing freezes during the heat treatment. The amount by which the plateau temperature dropped after the 1000 h heat treatment were 1.62° C, 2.07° C, and 0.66° C for Al, Ag, and Cu, respectively. These degradations were suspected to be caused by self-contaminations, and to prove this, impurity concentrations in each sample of the multicell were examined. The amount of temperature dropped after the 1000 h heat treatment showed similar values to the prediction based on the impurity-induced temperature changes, and it was concluded that each cell was self-contaminated by the metallic elements from the other cells. Ag and Cu were found to be main species causing the observed degradations.

  16. Aging effects on the microstructure, surface characteristics and wettability of Cu pretinned with Sn-Pb solders

    SciTech Connect

    Linch, H.S.

    1993-11-01

    This study investigates effects of aging in air and argon at 170 C on Cu coupons which were pretinned with 75Sn-25Pb, 8Sn-92Pb, and 5Sn-95Pb solders. Coatings were applied using electroplating or hot dipping techniques. The coating thickness was controlled between 3 to 3{mu}m and the specimens were aged for 0 hours, 2 hours, 24 hours and 2 weeks. Wetting balance tests were used to evaluate the wettability of the test specimens. Microstructural development was evaluated using X-ray diffraction, energy dispersive X-ray and Auger spectroscopy, as well as optical and scanning electron microscopy. The wetting behavior of the test specimens is interpreted with respect to observed microstructural changes and as a function of aging time, solder composition, and processing conditions.

  17. Two-dimensional topological insulators in group-11 chalcogenide compounds: M2Te (M =Cu ,Ag )

    NASA Astrophysics Data System (ADS)

    Ma, Yandong; Kou, Liangzhi; Dai, Ying; Heine, Thomas

    2016-06-01

    Two-dimensional (2D) topological insulators (TIs) are recently recognized states of quantum matter that are highly interesting for lower-power-consuming electronic devices owing to their nondissipative transport properties protected from backscattering. So far, only few 2D TIs, suffering from small bulk band gap (<10 meV ), have been experimentally confirmed. Here, through first-principles calculations, we propose a family of 2D TIs in group-11 chalcogenide 2D crystals, M2Te (M =Cu ,Ag ) . The nontrivial topological states in C u2Te and A g2Te 2D crystals, identified by topological invariant and edge state calculations, exhibit sizeable bulk gaps of 78 and 150 meV, respectively, suggesting that they are candidates for room-temperature applications. Moreover, strain engineering leads to effective control of the nontrivial gaps of C u2Te and A g2Te , and a topological phase transition can be realized in C u2Te , while the nontrivial phase in A g2Te is stable against strain. Their dynamic and thermal stabilities are further confirmed by employing phonon calculations and ab initio molecular dynamic simulations.

  18. Dihydrogen bond interactions as a result of H2 cleavage at Cu, Ag and Au centres.

    PubMed

    Grabowski, Sławomir J; Ruipérez, Fernando

    2016-05-14

    A quantum chemical study of H2 activation at fluorides of coinage metals, MF (M = Cu, Ag and Au), and its splitting was performed. The following reaction path was analyzed: FMH2→ FHHM → HMFH, where both the molecular complexes and the corresponding transition states have been characterized at the CCSD(T)/aug-cc-pVQZ//MP2/aug-cc-pVQZ level of theory. Further single-point CASSCF/CASPT2 calculations, including spin-orbit coupling effects, were also performed to analyze the role of non-dynamic correlation. The scalar relativistic effects are included via aug-cc-pVQZ-PP basis sets used for the metals. The dihydrogen-bonded copper (FHHCu) and silver (FHHAg) complexes are observed as a result of H2 cleavage, while the corresponding FHHAu gold complex is not found but the HAuHF arrangement is observed, instead. The energetic and geometrical parameters of the complexes have been analyzed and both the Quantum Theory of Atoms in Molecules approach and the Natural Bond Orbitals method were additionally applied to analyze the intermolecular interactions. PMID:27101741

  19. Ternary eutectic growth of Ag-Cu-Sb alloy within ultrasonic field

    NASA Astrophysics Data System (ADS)

    Zhai, Wei; Hong, Zhenyu; Wei, Bingbo

    2007-08-01

    The liquid to solid transformation of ternary Ag42.4Cu21.6Sb36 eutectic alloy was accomplished in an ultrasonic field with a frequency of 35 kHz, and the growth mechanism of this ternary eutectic was examined. Theoretical calculations predict that the sound intensity in the liquid phase at the solidification interface increases gradually as the interface moves up from the sample bottom to its top. The growth mode of ( ɛ + θ + Sb) ternary eutectic exhibits a transition of “divorced eutectic—mixture of anomalous and regular structures—regular eutectic” along the sample axis due to the inhomogeneity of sound field distribution. In the top zone with the highest sound intensity, the cavitation effect promotes the three eutectic phases to nucleate independently, while the acoustic streaming efficiently suppresses the coupled growth of eutectic phases. In the meantime, the ultrasonic field accelerates the solute transportation at the solid-liquid interface, which reduces the solute solubility of eutectic phases.

  20. Electronic structure and conductivity of nanocomposite metal (Au,Ag,Cu,Mo)-containing amorphous carbon films

    SciTech Connect

    Endrino, Jose L.; Horwat, David; Gago, Raul; Andersson, Joakim; Liu, Y.S.; Guo, Jinghua; Anders, Andre

    2008-05-14

    In this work, we study the influence of the incorporation of different metals (Me = Au, Ag, Cu, Mo) on the electronic structure of amorphous carbon (a-C:Me) films. The films were produced at room temperature using a novel pulsed dual-cathode arc deposition technique. Compositional analysis was performed with secondary neutral mass spectroscopy whereas X-ray diffraction was used to identify the formation of metal nanoclusters in the carbon matrix. The metal content incorporated in the nanocomposite films induces a drastic increase in the conductivity, in parallel with a decrease in the band gap corrected from Urbach energy. The electronic structure as a function of the Me content has been monitored by x-ray absorption near edge structure (XANES) at the C K-edge. XANES showed that the C host matrix has a dominant graphitic character and that it is not affected significantly by the incorporation of metal impurities, except for the case of Mo, where the modifications in the lineshape spectra indicated the formation of a carbide phase. Subtle modifications of the spectral lineshape are discussed in terms of nanocomposite formation.

  1. Chemical elements diffusion in the stainless steel components brazed with Cu-Ag alloy

    NASA Astrophysics Data System (ADS)

    Voiculescu, I.; Geanta, V.; Vasile, I. M.; Binchiciu, E. F.; Winestoock, R.

    2016-06-01

    The paper presents the study of diffusion of chemical elements through a brazing joint, between two thin components (0.5mm) made of stainless steel 304. An experimental brazing filler material has been used for brazing stainless steel component and then the diffusion phenomenon has been studied, in terms of chemical element displacement from the brazed separation interface. The filler material is in the form of a metal rod coated with ceramic slurry mixture of minerals, containing precursors and metallic powders, which can contribute to the formation of deposit brazed. In determining the distance of diffusion of chemical elements, on both sides of the fusion line, were performed measurements of the chemical composition using electron microscopy SEM and EDX spectrometry. Metallographic analysis of cross sections was performed with the aim of highlight the microstructural characteristics of brazed joints, for estimate the wetting capacity, adherence of filler metal and highlight any imperfections. Analyzes performed showed the penetration of alloying elements from the solder (Ag, Cu, Zn and Sn) towards the base material (stainless steel), over distances up to 60 microns.

  2. Synthesis and thermal behavior of tin-based alloy (Sn-Ag-Cu) nanoparticles.

    PubMed

    Roshanghias, Ali; Yakymovych, Andriy; Bernardi, Johannes; Ipser, Herbert

    2015-03-19

    The prominent melting point depression of nanoparticles has been the subject of a considerable amount of research. For their promising applications in electronics, tin-based nano-alloys such as near-eutectic Sn-Ag-Cu (SAC) alloys have been synthesized via various techniques. However, due to issues such as particle aggregation and oxidation or introduced impurities, the application of these nano-size particles has been confined or aborted. For instance, thermal investigations by DTA/DSC in a large number of studies revealed exothermic peaks in the range of 240-500 °C, i.e. above the melting point of SAC nanoparticles, with different and quite controversial explanations for this unclear phenomenon. This represents a considerable drawback for the application of nanoparticles. Correspondingly, in the current study, the thermal stability of SAC nanoparticles has been investigated via electron microscopy, XRD, FTIR, and DSC/TG analysis. It was found that the nanoparticles consist mainly of a metallic β-Sn core and an amorphous tin hydroxide shell structure. The SnO crystalline phase formation from this amorphous shell has been associated with the exothermic peaks on the first heating cycle of the nanoparticles, followed by a disproportionation reaction into metallic Sn and SnO₂.The results also revealed that the surfactant and reducing agent cannot only affect the size and size distribution of the nanoparticles, they might also alter the ratio between the amorphous shell and the crystalline core in the structure of particles. PMID:25757694

  3. Authenticity determination of Ag-Cu Lebanese coins using combined PIXE and RBS techniques

    NASA Astrophysics Data System (ADS)

    Roumie, M.; Nsouli, B.; Assafiri, Y.

    2012-07-01

    A set of silver-copper coins were investigated for their stochiometry in order to check any possible counterfeit. The studied coins are 50 Lebanese Piastres and are relatively recent, minted in 1952. They are supposed to have nominal concentration of 60 wt.% Ag and 40 wt.% Cu. In this work, it is shown the utility and capability of combining PIXE (particle induced X-ray emission) and RBS (Rutherford backscattering spectrometry) techniques to determine the elemental content and check the presence, if any, of surface layer. For this aim, 3 MeV proton beam and Al funny filter, used as x-ray absorber, were used to determine the elemental composition, based on the emission and detection of the characteristic x-rays of the corresponding elements. The first PIXE results of the supposed bulky coins showed an excess of silver composition vs. copper. In addition, the experimental protocol was checked by analyzing some other coins of known composition, such as 1-euro and 2-euro coins.

  4. Alkali and transition metal (Ag, Cu) salts of bridged 5-nitrotetrazole derivatives for energetic applications.

    PubMed

    Klapötke, Thomas M; Sabaté, Carles Miró; Rasp, Matthias

    2009-03-14

    A family of energetic salts based on the novel 5-(5-nitrotetrazole-2-ylmethyl)-tetrazolate anion (NTTz(-)) with alkali metals (Li(+), Na(+), K(+), Rb(+) and Cs(+)) were synthesized by the reaction of the free acid 5-(5-nitrotetrazole-2-ylmethyl)-tetrazole with a suitable alkali metal base (bicarbonate or carbonate) in alcohol or water. The sodium salt () was, in turn, used to form salts containing the NTTz(-) anion and Ag(+) () or Cu(2+) (, and ) cations. The new compounds were characterized by IR, Raman and NMR spectroscopy, mass spectroscopy, elemental analysis and differential scanning calorimetry (DSC). In addition, the solid-state structure of the NTTz(-) anion was determined by diffraction methods using X-ray analysis. We also assessed the energetic properties of the compounds using standardized (BAM) tests. Interestingly, the silver and copper salts are easily and safely initiated by the laser beam generated by a Raman machine and some of the compounds reported here have promising properties for applications as a new class of nitrogen-rich, more environmentally-friendly energetic materials. PMID:19240918

  5. Dehydrocyclization of peripheral alkyl groups in porphyrins at Cu(100) and Ag(111) surfaces

    NASA Astrophysics Data System (ADS)

    Williams, Christopher G.; Wang, Miao; Skomski, Daniel; Tempas, Christopher D.; Kesmodel, Larry L.; Tait, Steven L.

    2016-11-01

    The self-assembly of organic and metal-organic species at metal surfaces is a topic of high interest for applications that can benefit from tunable surface functionalization through organic building block design. As the complexity of molecular building blocks increases to direct ordering and function, thermal stability of the adsorbate often increases opening up new surface-catalyzed reaction pathways. We report dehydrocyclization of octaethylporphyrin to tetrabenzoporphyrin on the Cu(100) and Ag(111) surfaces at 500-600 K. Dehydrocyclization of smaller species is not typically observed on these surfaces at low pressure due to short adsorption lifetimes. The dehydrocyclization of peripheral ethyl groups forms benzo groups which then undergo additional dehydrogenation. The reaction products are characterized by high resolution electron energy loss spectroscopy (HREELS), scanning tunneling microscopy (STM), and X-ray photoelectron spectroscopy (XPS). These results extend our understanding of reaction pathways that may be encountered as molecular building blocks increase in size and complexity on relatively inert surfaces.

  6. Effect of Board Thickness on Sn-Ag-Cu Joint Interconnect Mechanical Shock Performance

    NASA Astrophysics Data System (ADS)

    Lee, Tae-Kyu; Xie, Weidong

    2014-12-01

    The mechanical stability of solder joints with Sn-Ag-Cu alloy joints on various board thicknesses was investigated with a high G level shock environment. A test vehicle with three different board thicknesses was used for board drop shock performance tests. These vehicles have three different strain and shock level condition couples per board, and are used to identify the joint stability and failure modes based on the board responses. The results revealed that joint stability is sensitive to board thickness. The board drop shock test showed that the first failure location shifts from the corner location near the standoff to the center with increased board thickness due to the shock wave response. From analysis of the thickness variation and failure cycle number, the strain rate during the pulse strain cycle is the dominant factor, which defines the life cycle number per board thickness, and not the maximum strain value. The failure location shift and the shock performance differentiation are discussed from the perspective of maximum principal strain, cycle frequency and strain rate per cycle.

  7. Thermal Cycling Reliability of Sn-Ag-Cu Solder Interconnections. Part 1: Effects of Test Parameters

    NASA Astrophysics Data System (ADS)

    Hokka, Jussi; Mattila, Toni. T.; Xu, Hongbo; Paulasto-Kröckel, Mervi

    2013-06-01

    The work presented in part 1 of this study focuses on identifying the effects of thermal cycling test parameters on the lifetime of ball grid array (BGA) component boards. Detailed understanding about the effects of the thermal cycling parameters is essential because it provides means to develop more efficient and meaningful methods of reliability assessment for electronic products. The study was carried out with a single package type (BGA with 144 solder balls), printed wiring board (eight-layer build-up FR4 structure), and solder interconnection composition (Sn-3.1Ag-0.5Cu) to ensure that individual test results would be comparable with each other. The effects of (i) temperature difference (Δ T), (ii) lower dwell temperature and lower dwell time, (iii) mean temperature, (iv) dwell time, and (v) ramp rate were evaluated. Based on the characteristic lifetimes, the thermal cycling profiles were categorized into three lifetime groups: (i) highly accelerated conditions, (ii) moderately accelerated conditions, and (iii) mildly/nonaccelerated conditions. Thus, one might be tempted to use the highly accelerated conditions to produce lifetime statistics as quickly as possible. However, to do this one needs to know that the failure mechanisms do not change from one lifetime group to another and that the failure mechanisms correlate with real-use failures. Therefore, in part 2 the observed differences in component board lifetimes will be explained by studying the failure mechanisms that take place in the three lifetime groups.

  8. Relation of pH and other soil variables to concentrations of Pb, Cu, Zn, Cd, and Se in earthworms

    USGS Publications Warehouse

    Beyer, W.N.; Hensler, G.L.; Moore, J.

    1987-01-01

    Various soil treatments (clay, composted peat, superphosphate, sulfur, calcium carbonate, calcium chloride, zinc chloride, selenous acid) were added to experimental field plots to test the effect of different soil variables on the concentrations of 5 elements in earthworms (Pb, Cu, Zn, Cd, Se). Concentrations of the 5 elements were related to 9 soil variables (soil Pb, soil Cu, soil Zn, pH, organic matter, P, K, Mg, and Ca) with linear multiple regression. Lead concentrations in earthworms were positively correlated with soil Pb and soil organic matter, and negatively correlated with soil pH and soil Mg, with an R2 of 64%. Se concentrations were higher in earthworms from plots amended with Se, and Zn concentrations were higher in earthworms from plots amended with Zn. However, none of the other soil variables had important effects on the concentrations of Cu, Zn, Cd and Se in earthworms. Although some significant statistical relations were demonstrated, the values of r2 of all relations (> 20%) were so low that they had little predictive value.

  9. Interactions of core-shell quantum dots with metal resistant bacterium Cupriavidus metallidurans: consequences for Cu and Pb removal.

    PubMed

    Slaveykova, Vera I; Pinheiro, José Paulo; Floriani, Magali; Garcia, Miguel

    2013-10-15

    In the present study we address the interactions of carboxyl-CdSe/ZnS core/shell quantum dots (QDs), as a model of water dispersible engineered nanoparticles, and metal resistant bacteria Cupriavidus metallidurans, largely used in metal decontamination. The results demonstrate that QDs with average hydrodynamic size of 12.9 nm adhere to C. metallidurans. The percentage of bacterial cells displaying QD-fluorescence increased proportionally with contact time and QD concentration in bacterial medium demonstrating the association of QDs with the metal resistant bacteria. No evidence of QD internalization into bacterial cytoplasm was found by transmission electron microscopy with energy dispersive X-ray spectrometry, however QD clusters of sizes between 20 and 50 nm were observed on the bacterial surface and in the bacterial periplasmic compartment; observations consistent with the losses of membrane integrity induced by QDs. The presence of 20 nM QDs induced about 2-fold increase in Cu and Pb uptake fluxes by C. metallidurans exposed to 500 nM Pb or Cu, respectively. Overall, the results of this work suggest that when present in mixture with Cu and Pb, low levels of QDs originating from possible incidental release or QD disposal could increase metal accumulation in metal resistant bacterium. PMID:23912077

  10. Synthesis of poly(aminopropyl/methyl)silsesquioxane particles as effective Cu(II) and Pb(II) adsorbents.

    PubMed

    Lu, Xin; Yin, Qiangfeng; Xin, Zhong; Li, Yang; Han, Ting

    2011-11-30

    Poly(aminopropyl/methyl)silsesquioxane (PAMSQ) particles have been synthesized by a one-step hydrolytic co-condensation process using 3-aminopropyltriethoxysilane (APTES) and methyltrimethoxysilane (MTMS) as precursors in the presence of base catalyst in aqueous medium. The amino functionalities of the particles could be controlled by adjusting the organosilanes feed ratio. The compositions of the amino-functionalized polysilsesquioxanes were confirmed by FT-IR spectroscopy, solid-state (29)Si NMR spectroscopy, and elemental analysis. The strong adsorbability of Cu(II) and Pb(II) ions onto PAMSQ particles was systematically examined. The effect of adsorption time, initial metal ions concentration and pH of solutions was studied to optimize the metal ions adsorbability of PAMSQ particles. The kinetic studies indicated that the adsorption process well fits the pseudo-second-order kinetics. Adsorption phenomena appeared to follow Langmuir isotherm. The PAMSQ particles demonstrate the highest Cu(II) and Pb(II) adsorption capacity of 2.29 mmol/g and 1.31 mmol/g at an initial metal ions concentration of 20mM, respectively. The PAMSQ particles demonstrate a promising application in the removal of Cu(II) and Pb(II) ions from aqueous solutions. PMID:21945683

  11. A bamboo-inspired hierarchical nanoarchitecture of Ag/CuO/TiO2 nanotube array for highly photocatalytic degradation of 2,4-dinitrophenol.

    PubMed

    Zhang, Xuhong; Wang, Longlu; Liu, Chengbin; Ding, Yangbin; Zhang, Shuqu; Zeng, Yunxiong; Liu, Yutang; Luo, Shenglian

    2016-08-01

    The optimized geometrical configuration of muitiple active materials into hierarchical nanoarchitecture is essential for the creation of photocatalytic degradation system that can mimic natural photosynthesis. A bamboo-like architecture, CuO nanosheets and Ag nanoparticles co-decorated TiO2 nanotube arrays (Ag/CuO/TiO2), was fabricated by using simple solution-immersion and electrodeposition process. Under simulated solar light irradiation, the 2,4-dinitrophenol (2,4-DNP) photocatalytic degradation rate over Ag/CuO/TiO2 was about 2.0, 1.5 and 1.2 times that over TiO2 nanotubes, CuO/TiO2 and Ag/TiO2, respectively. The enhanced photocatalytic activity of ternary Ag/CuO/TiO2 photocatalyst was ascribed to improved light absorption, reduced carrier recombination and more exposed active sites. Moreover, the excellent stability and reliability of the Ag/CuO/TiO2 photocatalyst demonstrated a promising application for organic pollutant removal from water. PMID:27107324

  12. Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy

    NASA Astrophysics Data System (ADS)

    Sharma, Ashutosh; Sohn, Heung-Rak; Jung, Jae Pil

    2016-01-01

    The effect of graphene nanoplatelets (GNPs) on the wettability, microstructure, and tensile properties of Sn-3.0Ag-0.5Cu (SAC 305) was studied using melting and casting route. The microstructure of the bulk solder is observed with a scanning electron microscope and transmi