Science.gov

Sample records for agar diffusion test

  1. Disk Agar Diffusion Susceptibility Testing of Yeasts

    PubMed Central

    Saubolle, Michael A.; Hoeprich, Paul D.

    1978-01-01

    A disk agar diffusion method was developed for testing the susceptibility of rapidly growing yeasts in vitro. A totally defined, completely synthetic agar culture medium (synthetic amino acid medium, fungal) and clinical isolates of Candida spp. and Torulopsis glabrata were used. Turbidimetric adjustment of cell suspensions resulted in standard, reproducible inocula, which gave sharp, clear zones of inhibition when applied by an agar overlay method. Optimal disk loads were determined for amphotericin B, amphotericin B methyl ester, 5-fluorocytosine, clotrimazole, and miconazole. Disk potencies were stable over a 2-month period when stored in a vacuum desiccator at −30°C. Using an error ratebounded classification, the zones of inhibition were correlated with both broth dilution and agar dilution minimum inhibitory concentrations (MICs). With amphotericin B and amphotericin B methyl ester, all isolates were susceptible, yielding zone diameters which clustered within 5 mm. Overall correlations between zone diameters and broth dilution MICs with 5-fluorocytosine, miconazole, and clotrimazole were 97, 96, and 82% (excluding T. glabrata), respectively; correlations of zone diameters with agar dilution MICs were 96, 92, and 88%, respectively. Disk diffusion susceptibility testing of yeasts appears to be generally applicable. However, when results are equivocal, quantitative test methods should be used. PMID:568910

  2. Serotyping reanalysis of unserotypable Actinobacillus pleuropneumoniae isolates by agar gel diffusion test.

    PubMed

    Morioka, Ayako; Shimazaki, Yoko; Uchiyama, Mariko; Suzuki, Shoko

    2016-05-01

    We observed increasing unserotypable (UT) Actinobacillus pleuropneumoniae isolates using agar gel diffusion (AGD) test. To reanalyze their serovar, we performed rapid slide agglutination (RSA) test and multiplex PCR for 47 UT isolates. Of these, 25 were serovar 1 (UT-serovar 1), 20 were serovar 2 (UT-serovar 2) and 2 were serovar 15 (UT-serovar 15). We examined serotyping antigen extraction temperature to determine heat influence. UT-serovar 1 and 15 were influenced by heat, because their precipitation lines were observed in the case of low antigen extraction temperature. To investigate the relationship between antigenicity and genotype, we performed pulsed-field gel electrophoresis (PFGE) analysis using UT-serovar 2 and 15. The predominant PFGE pattern of UT-serovar 2 was identical to that of serovar 2. PMID:26726101

  3. Serotyping reanalysis of unserotypable Actinobacillus pleuropneumoniae isolates by agar gel diffusion test

    PubMed Central

    MORIOKA, Ayako; SHIMAZAKI, Yoko; UCHIYAMA, Mariko; SUZUKI, Shoko

    2016-01-01

    We observed increasing unserotypable (UT) Actinobacillus pleuropneumoniae isolates using agar gel diffusion (AGD) test. To reanalyze their serovar, we performed rapid slide agglutination (RSA) test and multiplex PCR for 47 UT isolates. Of these, 25 were serovar 1 (UT-serovar 1), 20 were serovar 2 (UT-serovar 2) and 2 were serovar 15 (UT-serovar 15). We examined serotyping antigen extraction temperature to determine heat influence. UT-serovar 1 and 15 were influenced by heat, because their precipitation lines were observed in the case of low antigen extraction temperature. To investigate the relationship between antigenicity and genotype, we performed pulsed-field gel electrophoresis (PFGE) analysis using UT-serovar 2 and 15. The predominant PFGE pattern of UT-serovar 2 was identical to that of serovar 2. PMID:26726101

  4. In vitro antifungal susceptibility testing of Scopulariopsis brevicaulis strains using agar diffusion method.

    PubMed

    Skóra, Magdalena; Macura, Anna B

    2011-01-01

    The genus Scopulariopsis is a common soil saprotroph and has been isolated from air, organic waste and also from plant, animal and human tissues. Scopulariopsis has mainly been associated in humans with superficial mycoses, but it has also been described as the cause of subcutaneous and invasive infections. The most common aetiological agent of infections in humans is Scopulariopsis brevicaulis. This species has been reported to be resistant in vitro to broad-spectrum antifungal agents available today. The aim of the study was to establish in vitro antifungal susceptibility of 35 S. brevicaulis strains against amphotericin B (AMB), flucytosine (FC), caspofungin (CAS), terbinafine (TER), ciclopirox (CIC), voriconazole (VOR), clotrimazole (CTR), miconazole (MCZ), econazole (ECO), ketoconazole (KET), itraconazole (ITR), and fluconazole (FLU). Antifungal susceptibility tests were evaluated by an agar diffusion method (Neo-Sensitabs, Rosco, Denmark). AMB, FC, CAS, ITR and FLU showed no antifungal activity against S. brevicaulis. TER, CIC, CTR, KET, VOR, ECO, and MCZ revealed inhibitory activity for S. brevicaulis, but it varied for each of the drugs. The best antifungal effect was observed for TER and CIC. All isolates had large inhibition zones for TER and CIC. CTR was also inhibitory for all tested S. brevicaulis isolates, but the diameters of inhibition zones were smaller than for TER and CIC. Nearly 89% isolates showed inhibition zones for KET and the mean diameter of the inhibition zone was comparable to CTR. The least antifungal activity exhibited VQR, ECO and MCZ. Because of the multiresistance of S. brevicaulis, infections due to this species may not respond to particular antifungal treatment and other therapeutic approaches should be considered, e.g., combined therapy and/or surgery. PMID:21682097

  5. Inaccuracy of the Disk Diffusion Method Compared with the Agar Dilution Method for Susceptibility Testing of Campylobacter spp.

    PubMed Central

    Kotilainen, Pirkko; Puukka, Pauli; Nakari, Ulla-Maija; Siitonen, Anja; Eerola, Erkki; Huovinen, Pentti; Hakanen, Antti J.

    2012-01-01

    The agar dilution method has been standardized by the CLSI for the susceptibility testing of Campylobacter species, and according to these standards, the disk diffusion method should be used only in screening for macrolide and ciprofloxacin resistance. Nevertheless, the disk diffusion test is currently widely used, since it is easy to perform in clinical microbiology laboratories. In this study, the disk diffusion method was compared to the agar dilution method by analyzing the in vitro activities of seven antimicrobial agents against 174 Campylobacter strains collected in Finland between 2003 and 2008. Recommendations of the CLSI were followed using Mueller-Hinton agar plates with 5% of sheep blood. For each strain, the disk diffusion tests were performed two to four times. Of the 33 erythromycin-resistant strains (MIC, ≥16 μg/ml), 24 (73%) constantly showed a 6-mm erythromycin inhibition zone (i.e., no inhibition), while for seven strains the inhibition zone varied from 6 to 44 mm in repeated measurements. Among the 141 erythromycin-susceptible strains (MIC, <16 μg/ml), erythromycin inhibition zones varied between 6 and 61 mm. Of the 87 ciprofloxacin-resistant strains, 47 (54%) showed 6-mm inhibition zones, while 40 strains showed inhibition zones between 6 and 60 mm. Significant differences between the repetitions were observed in the disk diffusion for all antimicrobial agents and all strains except for the macrolide-resistant strains regarding the macrolides. For 17 (10%) strains, the variation in repeated measurements was substantial. These results show that the disk diffusion method may not be a reliable tool for the susceptibility testing of Campylobacter spp. Further studies are needed to assess whether the disk diffusion test could be improved or whether all susceptibilities of campylobacters should be tested using an MIC-based method. PMID:22075583

  6. Antimicrobial susceptibility testing for Helicobacter pylori isolates from Brazilian children and adolescents: Comparing agar dilution, E-test, and disk diffusion

    PubMed Central

    Ogata, Silvio Kazuo; Gales, Ana Cristina; Kawakami, Elisabete

    2014-01-01

    Antimicrobial susceptibility testing for Helicobacter pylori is increasingly important due to resistance to the most used antimicrobials agents. Only agar dilution method is approved by CLSI, but it is difficult to perform routinely. We evaluated the reliability of E-test and disk diffusion comparing to agar dilution method on Helicobacter pylori antimicrobial susceptibility testing. Susceptibility testing was performed for amoxicillin, clarithromycin, furazolidone, metronidazole and tetracycline using E-test, disk-diffusion and agar dilution method in 77 consecutive Helicobacter pylori strains from dyspeptic children and adolescents. Resistance rates were: amoxicillin - 10.4%, 9% and 68.8%; clarithromycin - 19.5%, 20.8%, 36.3%; metronidazole - 40.2%33.7%, 38.9%, respectively by agar dilution, E-test and disk diffusion method. Furazolidone and tetracycline showed no resistance rates. Metronidazole presented strong correlation to E-test (r = 0.7992, p < 0.0001) and disk diffusion method (r=-0.6962, p < 0.0001). Clarithromycin presented moderate correlation to E-test (r = 0.6369, p < 0.0001) and disk diffusion method (r=−0.5656, p < 0.0001). Amoxicillin presented weak correlation to E-test (r = 0.3565, p = 0.0015) and disk diffusion (r=−0.3565, p = 0.0015). Tetracycline presented weak correlation with E-test (r = 0.2346, p = 0.04) and furazolidone to disk diffusion (r=−0.0288, p = 0.8038). E-test presented better agreement with gold standard. It is an easy and reliable method for Helicobacter pylori susceptibility testing. Disk diffusion method presented high disagreement and high rates of major errors. PMID:25763052

  7. Improved agar diffusion method for detecting residual antimicrobial agents.

    PubMed

    Tsai, C E; Kondo, F

    2001-03-01

    The improved agar diffusion method for determination of residual antimicrobial agents was investigated, and the sensitivities of various combinations of test organisms and assay media were determined using 7 organisms, 5 media, and 31 antimicrobial agents. Bacillus stearothermophilus and synthetic assay medium (SAM) showed the greatest sensitivity for screening penicillins (penicillin G and ampicillin). The combination of Bacillus subtilis and minimum medium (MM) was the most sensitive for tetracyclines (oxytetracycline and chlortetracycline), B. stearothermophilus and SAM or Micrococcus luteus and Mueller-Hinton agar (MHA) for detecting tylosin and erythromycin, B. subtilis and MHA for aminoglycosides (streptomycin, kanamycin, gentamicin, and dihydrostreptomycin), B. stearothermophilus and SAM for polyethers (salinomycin and lasalocid), and B. subtilis and MM or Clostridium perfringens and GAM for polypeptides (thiopeptin, enramycin, virginiamycin, and bacitracin). However, gram-negative bacterium Escherichia coli ATCC 27166 and MM were better for screening for colistin and polymixin-B. For detecting the synthetic drugs tested, the best combination was B. subtilis and MM for sulfonamides, E. coli 27166 and MM for quinolones (oxolinic acid and nalidixic acid), B. subtilis and MM for furans (furazolidone), and the bioluminescent bacterium Photobacterium phosphoreum and luminescence assay medium for chloramphenicol and oxolinic acid. The results showed that the use of four assay plates, B. stearothermophilus and SAM, B. subtilis and MM, M. luteus and MHA, and E. coli 27166 and MM, was superior to the currently available techniques for screening for residual antimicrobial agents in edible animal tissues. PMID:11252480

  8. Modeling development of inhibition zones in an agar diffusion bioassay.

    PubMed

    Chandrasekar, Vaishnavi; Knabel, Stephen J; Anantheswaran, Ramaswamy C

    2015-09-01

    A two-temperature agar diffusion bioassay is commonly used to quantify the concentration of nisin using Micrococcus luteus as the indicator microorganism. A finite element computational model based on Fick's second law of diffusion was used to predict the radius of the inhibition zone in this diffusion bioassay. The model developed was used to calculate nisin concentration profiles as a function of time and position within the agar. The minimum inhibitory concentration (MIC) of nisin against M. luteus was determined experimentally. The critical time (T c) for growth of M. luteus within the agar diffusion bioassay was experimentally determined using incubation studies with nisin. The radius of the inhibition zone was predicted from the computational model as the location where the predicted nisin concentration at T c was equal to MIC. The MIC was experimentally determined to be 0.156 μg mL(-1), and T c was determined to be 7 h. Good agreement (R (2) = 0.984) was obtained between model-predicted and experimentally determined inhibition zone radii. PMID:26405525

  9. Modeling development of inhibition zones in an agar diffusion bioassay

    PubMed Central

    Chandrasekar, Vaishnavi; Knabel, Stephen J; Anantheswaran, Ramaswamy C

    2015-01-01

    A two-temperature agar diffusion bioassay is commonly used to quantify the concentration of nisin using Micrococcus luteus as the indicator microorganism. A finite element computational model based on Fick's second law of diffusion was used to predict the radius of the inhibition zone in this diffusion bioassay. The model developed was used to calculate nisin concentration profiles as a function of time and position within the agar. The minimum inhibitory concentration (MIC) of nisin against M. luteus was determined experimentally. The critical time (Tc) for growth of M. luteus within the agar diffusion bioassay was experimentally determined using incubation studies with nisin. The radius of the inhibition zone was predicted from the computational model as the location where the predicted nisin concentration at Tc was equal to MIC. The MIC was experimentally determined to be 0.156 μg mL−1, and Tc was determined to be 7 h. Good agreement (R2 = 0.984) was obtained between model-predicted and experimentally determined inhibition zone radii. PMID:26405525

  10. An agar diffusion study comparing the antimicrobial activity of Nanoseal with some other endodontic sealers.

    PubMed

    Aal-Saraj, Ali Burak; Ariffin, Zaihan; Masudi, Sam'an Malik

    2012-08-01

    The aim of this study was to evaluate the antimicrobial activity of a new experimental nano-hydroxyapatite epoxy resin-based sealer (Nanoseal) with several other commercially available sealers; AH26, Tubliseal, Sealapex and Roekoseal against Enterococcus faecalis, Pseudomonas aeruginosa, Streptococcus mutans, Streptococcus sobrinus and Escherichia coli for up to 7 days. Agar diffusion was used in this study. Fifty Muller-Hinton agar plates were prepared and divided into five experimental groups (n = 10), for each micro-organism. Another 10 agar plates were used as positive and negative controls. Endodontic sealers were tested against each micro-organism. Inhibition zones produced were recorded. The results of this study showed that all test materials exhibited inhibition zones towards the tested micro-organisms for 7 days except for Roekoseal, which showed no inhibition zones. Nanoseal and AH26 exhibited similar zones of inhibition. Significant difference was found between Nanoseal and the other tested sealers (P < 0.001). PMID:22827817

  11. Fastidious anaerobe agar compared with Wilkins-Chalgren agar, brain heart infusion agar, and brucella agar for susceptibility testing of Fusobacterium species.

    PubMed

    Brazier, J S; Goldstein, E J; Citron, D M; Ostovari, M I

    1990-11-01

    Fastidious anaerobe agar supported the growth of 82 strains of fusobacteria better than brain heart infusion agar, brucella agar, and Wilkins-Chalgren agar. Fastidious anaerobe agar showed less hazing and fewer tailing endpoints with beta-lactam antibiotics. Whole-blood supplementation improved the performance of all media. Wilkins-Chalgren agar without blood failed to support the growth of 17% of the strains. All Fusobacterium ulcerans strains were resistant to clindamycin. PMID:2073122

  12. Simplified 48-hour IMVic test: an agar plate method.

    PubMed

    Powers, E M; Latt, T G

    1977-09-01

    An agar plate method was developed for the performance of the IMVic (indole, methyl red, Voges-Proskauer, and citrate) tests in lieu of the conventional tubed liquid media. By modifying the composition of the media and adding agar, a single "X"-compartmented petri dish was prepared containing all four IMVic test media. Ease of performance and simplification of the test were achieved by inoculating all four media simultaneously from a single colony (single inoculum) on eosin-methylene blue agar. Tests with 87 cultures, representing 7 genera in the family Enterobacteriaceae, were completed with typical (correct) IMVic patterns for all cultures within 48 h. Parallel tests with conventional media showed that the agar plate method was superior, more sensitive, faster, and simpler to perform, and less time was required to identify Escherichia coli by 72 h. PMID:334074

  13. Total Antioxidant Capacity of Serum Determined Using the Potassium Permanganate Agar Method Based on Serum Diffusion in Agar.

    PubMed

    Zhou, Ying; Zhang, Meijuan; Liu, Hui

    2015-01-01

    Objectives. To develop a new method for determining total antioxidants in serum and to evaluate the total antioxidant capacity of organisms. Design and Methods. Sodium hyposulfite (Na2S2O3) and serum were used to evaluate the linearity and precision of the potassium permanganate agar method. The area of serum diffusion in samples from 30 intensive care unit (ICU) patients compared with 44 healthy subjects was determined by the potassium permanganate agar method. Results. The linearity (R (2) in the linear experiment of Na2S2O3 was 0.994; R (2) in the linear experiment of serum was 0.987) and precision (coefficient of variation of area of high level serum diffusion within-run, between-run, and between-day and coefficient of variation of area of low serum diffusion within-run, between-run, and between-day were all less than 10%) were acceptable using the potassium permanganate agar method. Total antioxidants of serum between the ICU group and the healthy group were different (p = 0.002, two tailed). Conclusions. Total antioxidants in serum can be determined by the potassium permanganate agar method. The total antioxidant capacity of an organism can be evaluated by the amount of total antioxidants in serum. PMID:26347595

  14. Total Antioxidant Capacity of Serum Determined Using the Potassium Permanganate Agar Method Based on Serum Diffusion in Agar

    PubMed Central

    Zhou, Ying; Zhang, Meijuan; Liu, Hui

    2015-01-01

    Objectives. To develop a new method for determining total antioxidants in serum and to evaluate the total antioxidant capacity of organisms. Design and Methods. Sodium hyposulfite (Na2S2O3) and serum were used to evaluate the linearity and precision of the potassium permanganate agar method. The area of serum diffusion in samples from 30 intensive care unit (ICU) patients compared with 44 healthy subjects was determined by the potassium permanganate agar method. Results. The linearity (R2 in the linear experiment of Na2S2O3 was 0.994; R2 in the linear experiment of serum was 0.987) and precision (coefficient of variation of area of high level serum diffusion within-run, between-run, and between-day and coefficient of variation of area of low serum diffusion within-run, between-run, and between-day were all less than 10%) were acceptable using the potassium permanganate agar method. Total antioxidants of serum between the ICU group and the healthy group were different (p = 0.002, two tailed). Conclusions. Total antioxidants in serum can be determined by the potassium permanganate agar method. The total antioxidant capacity of an organism can be evaluated by the amount of total antioxidants in serum. PMID:26347595

  15. Identification of Actinomyces israelii and Actinomyces naeslundii by Fluorescent-Antibody and Agar-Gel Diffusion Techniques1

    PubMed Central

    Lambert, Frank W.; Brown, June M.; Georg, Lucille K.

    1967-01-01

    This study was an attempt to develop a fluorescent-antibody (FA) test to differentiate Actinomyces israelii and A. naeslundii as an aid in their laboratory identification. Two strains of A. israelii (X522 and A601) and two strains of A. naeslundii (X454 and X600), which had received intensive study by several investigators, were used for the immunization of rabbits. Working titers, based on tests with antigens prepared from the homologous strains and from well-established heterologous strains, were determined for each labeled antibody preparation. These conjugates and their normal serum control conjugates were used separately to stain 85 cultures of Actinomyes species and 23 strains of other species that might be confused with them. Acetone-precipitated soluble antigens from these same strains were tested with different antisera in the agar-gel diffusion test. Results showed that A. israelii (X522 and A601) and A. naeslundii (X454 and X600) labeled antiglobulins, when used at their working titers, stained most strains of their homologous species. Agar-gel diffusion results showed general agreement with those of the FA tests. The two tests appear to be equal in sensitivity, but the FA test is more specific, since several cross-reactions were noted with the agar-gel diffusion test whereas no cross-reactions were obtained with the FA reagents. Agar-gel and FA studies suggest that at least two serotypes of A. israelii may be associated with human disease. Although the majority of strains tested in this study appear to belong to a common serotype, “serotype 1,” two strains of an apparent second serotype, “serotype 2,” were encountered. FA staining of tissue impression smears from experimentally infected mice was successful when a counterstain, Evans Blue dye, was used. PMID:4964473

  16. Comparison of the antibacterial activity of chelating agents using the agar diffusion method

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of 2 metal chelators. Concentrations of 0 to 40 mM of ethylenediaminetetraacetic acid (EDTA) and ethylenediamine-N,N’-disuccinic acid (EDDS) were prepared in 1.0 M potassium hydroxide (KOH). The pH of the solutions was adjusted to 1...

  17. Diffusion of Methylene Blue in Phantoms of Agar Using a Photoacoustic Technique

    NASA Astrophysics Data System (ADS)

    Vilca-Quispe, L.; Alvarado-Gil, J. J.; Quintana, P.; Ordonez-Miranda, J.

    2010-05-01

    In this work, the kinetics of diffusion of methylene blue in agar aqueous solution is studied using a photoacoustic technique. Two agar phantoms solutions in water with a relation of mass/volume of 0.01% and 0.05% were analyzed. The study was performed using a modified Rosencwaig photoacoustic cell that is enclosed by transparent windows, on both sides. The sample is deposited directly on top of the upper window. A red light beam, at a fixed modulation frequency, is sent through the lower window illuminating the sample and inducing the photoacoustic effect inside the closed chamber of the cell. At the beginning of the experiment, a droplet of 100μL of agar solution is deposited; afterwards, the signal stabilizes, and 10μL of methylene blue aqueous solution (0.0125 g · mL-1) is added to the surface of the agar. During the first seconds of the experiment, the photoacoustic signal amplitude increases followed by a gradual and long decay. Results for modulation frequencies in the range from 10Hz to 80Hz for both agar concentrations are presented. A simple theoretical approach is presented to analyze the experimental data. It is demonstrated that the kinetics of the process can be parameterized as a function of the changes of an effective optical absorption coefficient. From these results, the characteristic time, in which the dye diffusion process stabilizes, is obtained. It is found that this time is larger for samples with a higher agar concentration. These differences provide important results for biomedical sciences in which agar gels are used as phantoms resembling some of the properties of living organs and tissues.

  18. Cytotoxicity of ferrite particles by MTT and agar diffusion methods for hyperthermic application

    NASA Astrophysics Data System (ADS)

    Kim, Dong-Hyun; Lee, Se-Ho; Kim, Kyoung-Nam; Kim, Kwang-Mahn; Shim, In-Bo; Lee, Yong-Keun

    2005-05-01

    We investigated the cytotoxicity of the prepared various ferrites (Fe-, Li-, Ni/Zn/Cu-, Ba-, Sr-, Co-, Co/Ni-ferrites) using MTT assay as well as agar diffusion method. Their cytotoxicity was compared with that of alginate-encapsulated ferrites. In the MTT assay, Fe 3O 4 and SrFe 12O 19 ferrite showed the highest cell viability of 90%. Alginate-encapsulated Ba-ferrite was ranked mildly cytotoxic, whereas their ferrite particles were ranked cytotoxic.

  19. Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion-reaction based continuum model.

    PubMed

    Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

    2016-01-01

    Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion-reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm's shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here. PMID:27434099

  20. The agar diffusion scratch assay - A novel method to assess the bioactive and cytotoxic potential of new materials and compounds

    PubMed Central

    Pusnik, Mascha; Imeri, Minire; Deppierraz, Grégoire; Bruinink, Arie; Zinn, Manfred

    2016-01-01

    A profound in vitro evaluation not only of the cytotoxic but also of bioactive potential of a given compound or material is crucial for predicting potential effects in the in vivo situation. However, most of the current methods have weaknesses in either the quantitative or qualitative assessment of cytotoxicity and/or bioactivity of the test compound. Here we describe a novel assay combining the ISO 10993-5 agar diffusion test and the scratch also termed wound healing assay. In contrast to these original tests this assay is able to detect and distinguish between cytotoxic, cell migration modifying and cytotoxic plus cell migration modifying compounds, and this at higher sensitivity and in a quantitative way. PMID:26861591

  1. Antimicrobial Disk Susceptibility Testing of Leptospira spp. Using Leptospira Vanaporn Wuthiekanun (LVW) Agar.

    PubMed

    Wuthiekanun, Vanaporn; Amornchai, Premjit; Langla, Sayan; White, Nicholas J; Day, Nicholas P J; Limmathurotsakul, Direk; Peacock, Sharon J

    2015-08-01

    Leptospira Vanaporn Wuthiekanun (LVW) agar was used to develop a disk diffusion assay for Leptospira spp. Ten pathogenic Leptospira isolates were tested, all of which were susceptible to 17 antimicrobial agents (amoxicillin/clavulanic acid, amoxicillin, azithromycin, cefoxitin, ceftazidime, ceftriaxone, chloramphenicol, ciprofloxacin, clindamycin, doripenem, doxycycline, gentamicin, linezolid, nitrofurantoin, penicillin, piperacillin/tazobactam, and tetracycline). All 10 isolates had no zone of growth inhibition for four antimicrobials (fosfomycin, nalidixic acid, rifampicin, and trimethoprim/sulfamethoxazole). Of the ten Leptospira, seven had a growth inhibition zone of ≤ 21 mm for aztreonam, the zone diameter susceptibility break point for Enterobacteriaceae. This assay could find utility as a simple screening method during the epidemiological surveillance of antimicrobial resistance in Leptospira spp. PMID:26055750

  2. Susceptibility testing of Propionibacterium acnes comparing agar dilution with E test.

    PubMed Central

    Smith, M A; Alperstein, P; France, K; Vellozzi, E M; Isenberg, H D

    1996-01-01

    Propionibacterium acnes has been identified as a significant agent of nosocomial infections, including endophthalmitis. Data concerning susceptibility of P. acnes to newer beta-lactam antibiotics and fluoroquinolones are limited. Recent reports suggest that quinolones have activity against these organisms sufficient to warrant further study. We undertook a study to select appropriate antimicrobial agents for use in a rabbit model of P. acnes endophthalmitis. We compared the antibiotic susceptibilities of P. acnes by using the National Committee for Clinical Laboratory Standards method of agar dilution with the E test. Thirteen clinical isolates obtained from eye specimens and three American Type Culture Collection control strains were tested against 14 antibiotics. All the clinical isolates were susceptible by both methods to piperacillin, piperacillin-tazobactam, ampicillin-sulbactam, ticarcillin-clavulanate, cefotaxime, cefotetan, ceftriaxone, cefoxitin, and imipenem in addition to clindamycin but were resistant to metronidazole. The clinical P. acnes isolates also displayed high-level susceptibility to ciprofloxacin, sparfloxacin, and ofloxacin. Almost all the P. acnes strains demonstrated E-test MICs within 2 dilutions of the MICs observed by the agar dilution method. Those few strains for which discrepancies were noted exhibited E-test susceptibilities three- to fivefold dilutions lower than the agar dilution method susceptibilities but only with ampicillin-sulbactam, ticarcillin-clavulanate, and/or clindamycin. On the basis of our study, all of clinical eye isolates were susceptible to these newer antimicrobial agents and the two methods demonstrated similar susceptibility patterns. PMID:8815076

  3. Cell-on-hydrogel platform made of agar and alginate for rapid, low-cost, multidimensional test of antimicrobial susceptibility.

    PubMed

    Sun, Han; Liu, Zhengzhi; Hu, Chong; Ren, Kangning

    2016-08-01

    Antimicrobial resistance (AMR) is a rapidly increasing threat to the effective treatment of infectious diseases worldwide. The two major remedies include: (1) using narrow-spectrum antibiotics based on rapid diagnosis; and (2) developing new antibiotics. A key part of both remedies is the antimicrobial susceptibility test (AST). However, the current standard ASTs that monitor colony formation are costly and time-consuming and the new strategies proposed are not yet practical to be implemented. Herein, we report a strategy to fabricate whole-hydrogel microfluidic chips using alginate-doped agar. This agar-based microfabrication makes it possible to prepare inexpensive hydrogel devices, and allows a seamless link between microfluidics and conventional agar-based cell culture. Different from common microfluidic systems, in our system the cells are cultured on top of the device, similar to normal agar plate culture; on the other hand, the microfluidic channels inside the hydrogel allow precise generation of linear gradient of drugs, thus giving a better performance than the conventional disk diffusion method. Cells in this system are not exposed to any shear flow, which allows the reliable tracking of individual cells and AST results to be obtained within 2-3 hours. Furthermore, our system could test the synergistic effect of drugs through two-dimensional gradient generation. Finally, the platform could be directly implemented to new drug discovery and other applications wherein a fast, cost-efficient method for studying the response of microorganisms upon drug administration is desirable. PMID:27452345

  4. Susceptibility of a polycaprolactone-based root canal filling material to degradation using an agar-well diffusion assay

    PubMed Central

    Hiraishi, Noriko; Sadek, Fernanda T.; King, Nigel M.; Ferrari, Marco; Pashley, David H.; Tay, Franklin R

    2013-01-01

    Purpose Cholesterol esterase is both a component of salivary hydrolases as well as an inflammatory cell-derived enzyme and has been shown to cause biodegradation of methacrylate-based resin composites. This study examined whether Resilon, a polycaprolactone-based thermoplastic root filling material is susceptible to biodegradation by cholesterol esterase using agar-well diffusion assay of serially-diluted aqueous Resilon emulsions that were dispersed in agar. Materials and methods Emulsions of Resilon and polycaprolactone were prepared and dispersed in agar on culture plates. Two different concentrations of a cholesterol esterase (0.3 and 1.2 U/mL) were prepared and fed to wells prepared in the agar plates using an agar-well diffusion assay for examination the degradation of polymeric materials. Results Degradation of the emulsified Resilon was manifested as the formation of clear zones of different sizes around the agar wells. No clear zones were observed in agar wells that contain sterile distilled water as the negative control. Clinical significance Although dispersion Resilon into an emulsion is not the way in which this material is employed as a root filling material, the potential for Resilon to be degraded by cholesterol esterase is of potential concern as one cannot limit the degradation of extruded Resilon from a root apex by monocyte-derived macrophages to just the anatomical root apex. As the present study employed a high concentration of cholesterol esterase, further studies should be directed to examining the degradation of Resilon using macrophage cell cultures. PMID:18578181

  5. Infrared thermography analysis of thermal diffusion induced by RF magnetic field on agar phantoms loaded with magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Bante-Guerra, Jose; Macías, J. D.; Caballero-Aguilar, L.; Vales-Pinzón, C.; Alvarado-Gil, J. J.

    2013-02-01

    Recently, several treatments for fighting malignant tumors have been designed. However these procedures have well known inconveniences, depending on their applicability, tumor size and side effects, among others. Magnetic hyperthermia is a safe, non-invasive method for cancer therapy. This treatment is applied via elevation of target tissue temperature by dissipation of heat from Magnetic Nanoparticles (MNPs), previously located within the tumor. The induction of heat causes cell death and therefore the removal of the tumor. In this work the thermal diffusion in phantoms of agar loaded with magnetic nanoparticles (MNPs) is studied using the infrared thermography technique, which is widely used in biology/medicine (e.g. skin temperature mapping). Agar is one of the materials used to simulate different types of body tissues, these samples are known as "phantoms". Agar is of natural origin, low cost and high degree of biocompatibility. In this work the agar gel was embedded with MNPs by coprecipitation and placed in an alternating magnetic field radiation. As a consequence, the energy from the radiation source is dissipated as heat and then transferred from the MNP to the gel, increasing its temperature. For the temperature analysis, the samples of agar gel were stimulated by RF magnetic field generated by coils. Heating was measured with infrared thermography using a Thermovision A20M infrared camera. Thermographic images allowed obtaining the dependence of thermal diffusion in the phantom as a function of the magnitude of the applied RF magnetic field and the load of magnetic particles.

  6. [Identification of Gram negative rods and evaluation of their antibiotic sensitivity: comparison of the BIOTEST MHK/ID-system with the API 20E-system and the agar diffusion test].

    PubMed

    Stanek, G; Hirschl, A; Rotter, M

    1982-10-01

    BIOTEST MHK/ID is a new system for the identification of gramnegative fermentative and non fermentative rods and for the simultaneous determination of the minimal inhibitory concentrations (MICs) against 15 antimicrobial drugs. Its identification system was compared with the API 20E kit. When the computer generated identification manuals for each of the systems were used 99.5% of the 190 strains tested were identified. Of these identifications 98.4% were identical. Comparing the results of altogether 16 biochemical reactions 92.3% (table 4) were conformable. Considering each single test low agreement was found with the results of the Citrate-, Urea-, Voges-Proskauer- and Arginindehydrolase-tests (76.8, 79.5, 85.3 and 86.8% agreement, respectively). The BIOTEST MHK/ID system yielded more positive reactions. But despite of these differences there was no influence on the accuracy in identifying the species. Thus, both systems must be considered equally suited to identify gramnegative rods. The results of both BIOTEST MHK/ID system (MIC-values) and the agardiffusion test (inhibition zone sizes) were transferred into the interpretative criteria "sensitive", "intermediate" and "resistant" (table 1) and compared for each strain. The overall-agreement amounted to 93.0% (table 7). With the MIC-test, however, more (7.2%) strains were found "intermediate" than with the agardiffusion test (3.1%, table 8). PMID:6817546

  7. Assessment of Etest as an alternative to agar dilution for antimicrobial susceptibility testing of Neisseria gonorrhoeae.

    PubMed

    Liu, Hsi; Taylor, Thomas H; Pettus, Kevin; Trees, David

    2014-05-01

    We studied whether the Etest can be used as an alternative to agar dilution to determine antimicrobial susceptibilities of ceftriaxone, cefixime, and cefpodoxime in Neisseria gonorrhoeae surveillance. One hundred fifteen clinical and laboratory isolates of N. gonorrhoeae were tested following the Clinical Laboratory Improvement Amendments (CLIA)-approved CLSI standard agar dilution method and, separately, by the Etest according to the manufacturer's recommendations. The MICs were determined and compared. Ten laboratory-generated mutants were used to simulate substantially nonsusceptible specimens. The Etest and agar dilution methods were well correlated. Statistical tests produced regression R2 values of 88%, 82%, and 85% and Pearson correlation coefficients of 92%, 91%, and 92% for ceftriaxone, cefixime, and cefpodoxime, respectively. When paired comparisons were made, the two tests were 88.7%, 80%, and 87% within 1 log2 dilution from each other for ceftriaxone, cefixime, and cefpodoxime, respectively. The within-2-log2 agreements were 99.1%, 98.3%, and 94.8% for ceftriaxone, cefixime, and cefpodoxime, respectively. Notwithstanding the good correlations and the within-2-log2 general agreement, the Etest results produced slightly lower MICs than the agar dilution results. In conclusion, we found that the Etest can be effectively used as an alternative to agar dilution testing to determine the susceptibility of N. gonorrhoeae to ceftriaxone, cefixime, and cefpodoxime, although we recommend further research into extremely resistant isolates. For isolates within the typical range of clinical MICs, reexamination of the Etest interpretation of susceptible and nonsusceptible categories would likely allow for successful transition from agar dilution to the Etest. PMID:24554750

  8. Assessment of Etest as an Alternative to Agar Dilution for Antimicrobial Susceptibility Testing of Neisseria gonorrhoeae

    PubMed Central

    Taylor, Thomas H.; Pettus, Kevin; Trees, David

    2014-01-01

    We studied whether the Etest can be used as an alternative to agar dilution to determine antimicrobial susceptibilities of ceftriaxone, cefixime, and cefpodoxime in Neisseria gonorrhoeae surveillance. One hundred fifteen clinical and laboratory isolates of N. gonorrhoeae were tested following the Clinical Laboratory Improvement Amendments (CLIA)-approved CLSI standard agar dilution method and, separately, by the Etest according to the manufacturer's recommendations. The MICs were determined and compared. Ten laboratory-generated mutants were used to simulate substantially nonsusceptible specimens. The Etest and agar dilution methods were well correlated. Statistical tests produced regression R2 values of 88%, 82%, and 85% and Pearson correlation coefficients of 92%, 91%, and 92% for ceftriaxone, cefixime, and cefpodoxime, respectively. When paired comparisons were made, the two tests were 88.7%, 80%, and 87% within 1 log2 dilution from each other for ceftriaxone, cefixime, and cefpodoxime, respectively. The within-2-log2 agreements were 99.1%, 98.3%, and 94.8% for ceftriaxone, cefixime, and cefpodoxime, respectively. Notwithstanding the good correlations and the within-2-log2 general agreement, the Etest results produced slightly lower MICs than the agar dilution results. In conclusion, we found that the Etest can be effectively used as an alternative to agar dilution testing to determine the susceptibility of N. gonorrhoeae to ceftriaxone, cefixime, and cefpodoxime, although we recommend further research into extremely resistant isolates. For isolates within the typical range of clinical MICs, reexamination of the Etest interpretation of susceptible and nonsusceptible categories would likely allow for successful transition from agar dilution to the Etest. PMID:24554750

  9. Lung diffusion testing

    MedlinePlus

    Lung diffusion testing measures how well the lungs exchange gases. This is an important part of lung testing , because ... Gender Height Hemoglobin (the protein in red blood cells that carries oxygen) level

  10. Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

    PubMed

    Falland-Cheung, Lisa; Piccione, Neil; Zhao, Tianqi; Lazarjan, Milad Soltanipour; Hanlin, Suzanne; Jermy, Mark; Waddell, J Neil

    2016-06-01

    Routine forensic research into in vitro skin/skull/brain ballistic blood backspatter behavior has traditionally used gelatin at a 1:10 Water:Powder (W:P) ratio by volume as a brain simulant. A limitation of gelatin is its high elasticity compared to brain tissue. Therefore this study investigated the use of dental alginate and agar impression materials as a brain simulant for ballistic testing. Fresh deer brain, alginate (W:P ratio 91.5:8.5) and agar (W:P ratio 81:19) specimens (n=10) (11×22×33mm) were placed in transparent Perspex boxes of the same internal dimensions prior to shooting with a 0.22inch caliber high velocity air gun. Quantitative analysis to establish kinetic energy loss, vertical displacement elastic behavior and qualitative analysis to establish elasticity behavior was done via high-speed camera footage (SA5, Photron, Japan) using Photron Fastcam Viewer software (Version 3.5.1, Photron, Japan) and visual observation. Damage mechanisms and behavior were qualitatively established by observation of the materials during and after shooting. The qualitative analysis found that of the two simulant materials tested, agar behaved more like brain in terms of damage and showed similar mechanical response to brain during the passage of the projectile, in terms of energy absorption and vertical velocity displacement. In conclusion agar showed a mechanical and subsequent damage response that was similar to brain compared to alginate. PMID:27131216

  11. Use of agar diffusion assay to evaluate bactericidal activity of formulations of alkaline salts of fatty acids against bacteria associated with poultry processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of alkaline salts of fatty acids (FA). Wells in agar media seeded with bacteria were filled with FA-potassium hydroxide (KOH) solutions, plates were incubated, and zones of inhibition were measured. The relationship between bacteric...

  12. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus.

    PubMed

    Laarhoven, Bob; Elissen, H J H; Temmink, H; Buisman, C J N

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

  13. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus

    PubMed Central

    Laarhoven, Bob; Elissen, H. J. H.; Temmink, H.; Buisman, C. J. N.

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

  14. The Resazurin-Agar Method - a Quick Test to Determine Water Quality

    NASA Astrophysics Data System (ADS)

    Huckfeldt, J.; Westphal, B.; Claußen, L.

    2015-12-01

    Rezasurin has been used as a smart tracer in stream ecosystems to indicate metabolic activity, specifically aerobic respiration by heterotrophic bacteria. Resazurin is a blue compound which is irreversibly reduced to the pink resorufin in the presence of aerobic bacteria. The degree and speed of colour change from blue to pink is a measure of the degree of oxygen consumption and thus an indirect indication of the concentration of aerobic bacteria in a given medium. A high concentration of bacteria in water indicates a bad water quality. In our work a method was developed using resazurin agar plates to find a quick and easy way for testing water quality and comparing concentrations of bacteria in freshwater and seawater samples. The theory was to concentrate bacteria from a defined volume of water sample onto polycarbonate filters (0.2 μm), which are then placed onto the resazurin agar plate. The presence of aerobic bacteria on the filter will reduce the resazurin in the agar and the compound changes its colour. First tests conducted with different dilutions of a pure culture of yoghurt bacteria showed promising results and confirmed the feasibility of the method. In a further assay, we used water samples from different water layers and different temperatures and were also able to observe differences in the concentration of bacteria, depending on these different environmental conditions.The assay was also successfully used with seawater samples, collected from 2 different stations at 3 different depths in the Baltic Sea (salinity=15). The discolouration of the plates showed good correlation with the oxygen concentrations in the water. The resazurin-agar plate method is economical and fast. Several samples could be investigated at the same time without sacrificing the reliability of the results. Thus it is a good pre-screening test for a quantitative evaluation of bacteria in a water sample.

  15. Agar disk elution method for susceptibility testing of Mycobacterium marinum and Mycobacterium fortuitum complex to sulfonamides and antibiotics.

    PubMed Central

    Stone, M S; Wallace, R J; Swenson, J M; Thornsberry, C; Christensen, L A

    1983-01-01

    An agar disk elution method using round well plates, supplemented Mueller-Hinton agar, and commercial drug disks is described for susceptibility testing of Mycobacterium marinum and the rapidly growing mycobacteria to antibiotics and sulfonamides. By this method, 14 of 14 strains of M. marinum were susceptible to rifampin, doxycycline, minocycline, and trimethoprim-sulfamethoxazole. Identical results were obtained with Middlebrook 7H10 agar and drugs prepared from standard powders. With 58 isolates of Mycobacterium fortuitum and Mycobacterium chelonei, this method had a 92% correlation with broth minimal inhibitory concentration determinations for cefoxitin and greater than 98% for doxycycline, kanamycin, amikacin, and the sulfonamides. Sixty-nine percent of isolates of M. chelonei susceptible to amikacin on supplemented Mueller-Hinton agar were resistant on 7H10 agar, and 15 of 16 M. chelonei isolates susceptible to erythromycin in broth were resistant by disk elution when an endpoint of no growth was used with either agar. The agar disk elution method offers a practical method for testing of most antibacterial agents against these mycobacterial species. Images PMID:6651277

  16. Comparison of E-test with agar dilution methods in testing susceptibility of N. gonorrhoeae to azithromycin.

    PubMed

    Yasin, R M; Suan, K A; Meng, C Y

    1997-05-01

    A single dose of a new antibiotic, azithromycin, has been shown to be effective in the treatment of uncomplicated Neisseria gonorrhoeae. A clinical study was conducted to assess the in vitro susceptibility of N gonorrhoeae to azithromycin and compare the reliability of results obtained using the new E-test methodology for determination of the minimum inhibitory concentration (MIC) of antibiotic with those obtained through the standard agar dilution method. 135 clinical isolates of N gonorrhoeae were obtained from patients attending hospital-based sexually transmitted disease clinics in five geographic locations in Malaysia. 76 of the isolates were penicillinase-producing N gonorrhoeae and 69 were high-level tetracycline-resistant N gonorrhoeae. All isolates were susceptible to azithromycin based on the susceptible MIC breakpoint of 2.0 mcg/ml. The MICs ranged from 0.0078-0.25 mcg/ml by agar dilution method and from 0.016-0.50 mcg/ml by E-test. Agreement between these two methods was 97.8%. The single-dose regime and good antigonococcal and antichlamydial activity of azithromycin make this antibiotic a suitable treatment choice. Moreover, the findings of this study suggest that the simpler, faster E-test is as reliable as the agar dilution method. Given the tendency of the antimicrobial susceptibility pattern of N gonorrhoeae to change rapidly, it is important to monitor MICs to detect the emergence of resistance. PMID:9153733

  17. Use of agar diffusion assay to measure bactericidal activity of alkaline salts of fatty acids against bacteria associated with poultry processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of alkaline salts of caproic, caprylic, capric, lauric, and myristic acids. A 0.5M concentration of each fatty acid was dissolved in 1.0 M potassium hydroxide (KOH), and pH of the mixtures was adjusted to 10.5 with citric acid. Solu...

  18. National Committee for Clinical Laboratory Standards agar dilution susceptibility testing of anaerobic gram-negative bacteria.

    PubMed Central

    Brown, W J

    1988-01-01

    One hundred nine recent clinical isolates of anaerobic gram-negative bacteria were tested in triplicate by the National Committee for Clinical Laboratory Standards agar dilution procedure for their susceptibility to 32 antimicrobial agents. All isolates were inhibited by imipenem, but there were significant numbers of strains resistant to other beta-lactam drugs, and therefore the in vitro response to these antimicrobial agents cannot be predicted. This was particularly true for the bile-resistant or Bacteroides fragilis group. beta-Lactamase production was detected in 82% of the bacteroides with the nitrocefin test. Clavulanic acid combined with amoxicillin and ticarcillin and sulbactam combined with ampicillin resulted in synergistic activity against all beta-lactamase-positive organisms. Ceftizoxime was the most active of the cephalosporins. Two percent of the isolates were resistant to chloramphenicol and metronidazole. Clindamycin resistance was detected in 38% of the B. fragilis group, which is a marked increase from the 4% detected 10 years ago at this institution. PMID:3364956

  19. Handheld Diffusion Test Cells

    NASA Technical Reports Server (NTRS)

    2001-01-01

    This photo shows an individual cell from the Handheld Diffusion Test Cell (HH-DTC) apparatus flown on the Space Shuttle. Similar cells will be used in the Observable Protein Crystal Growth Apparatus (OPCGA) to be operated aboard the International Space Station (ISS). The principal investigator is Dr. Alex McPherson of the University of California, Irvine. Each individual cell comprises two sample chambers with a rotating center section that isolates the two from each other until the start of the experiment and after it is completed. The cells are made from optical-quality quartz glass to allow photography and interferometric observations. Each cell has a small light-emitting diode and lens to back-light the solution. In protein crystal growth experiments, a precipitating agent such as a salt solution is used to absorb and hold water but repel the protein molecules. This increases the concentration of protein until the molecules nucleate to form crystals. This cell is one of 96 that make up the experiment module portion of the OPCGA.

  20. Handheld Diffusion Test Cells

    NASA Technical Reports Server (NTRS)

    2001-01-01

    This photo shows the Handheld Diffusion Test Cell (HH-DTC) apparatus flown on the Space Shuttle. Similar cells (inside the plastic box) will be used in the Observable Protein Crystal Growth Apparatus (OPCGA) to be operated aboard the International Space Station (ISS). The principal investigator is Dr. Alex McPherson of the University of California, Irvine. Each individual cell comprises two sample chambers with a rotating center section that isolates the two from each other until the start of the experiment and after it is completed. The cells are made from optical-quality quartz glass to allow photography and interferometric observations. Each cell has a small light-emitting diode and lens to back-light the solution. In protein crystal growth experiments, a precipitating agent such as a salt solution is used to absorb and hold water but repel the protein molecules. This increases the concentration of protein until the molecules nucleate to form crystals. This cell is one of 96 that make up the experiment module portion of the OPCGA.

  1. Comparison of Citrated Human Blood, Citrated Sheep Blood, and Defibrinated Sheep Blood Mueller-Hinton Agar Preparations for Antimicrobial Susceptibility Testing of Streptococcus pneumoniae Isolates ▿

    PubMed Central

    Satzke, Catherine; Seduadua, Anna; Chandra, Reginald; Carapetis, Jonathan R.; Mulholland, E. Kim; Russell, Fiona M.

    2010-01-01

    The use of Mueller-Hinton agar supplemented with citrated human or citrated sheep blood was compared with the use of routinely used Mueller-Hinton agar supplemented with defibrinated sheep blood for antimicrobial susceptibility testing of Streptococcus pneumoniae. The alternate supplements were found to be unsatisfactory, particularly for testing resistant isolates, and therefore are not recommended. PMID:20668133

  2. Liofilchem® O.A. Listeria agar and direct CAMP test provided sooner Listeria monocytogenes identification from neonatal bacteremia

    PubMed Central

    Savini, Vincenzo; Marrollo, Roberta; Serio, Annalisa; Paparella, Antonello; Argentieri, Angela Valentina; D’Antonio, Marianna; Coclite, Eleonora; Fusilli, Paola; Fazii, Paolo

    2014-01-01

    Listeria monocytogenes infection in pregnant women and newborns is a cause for serious concern, and invasive disease outcome strongly depends on prompt antibiotic therapy. To provide sooner identification from neonatal bacteremia we performed a CAMP test directly on positive blood aliquots and inoculated the Liofilchem® O.A. Listeria chromogenic agar as well, thus providing a 24-h turn-around time for response. PMID:24695762

  3. Comparison of agar dilution and antibiotic gradient strip test with broth microdilution for susceptibility testing of swine Brachyspira species.

    PubMed

    Mirajkar, Nandita S; Gebhart, Connie J

    2016-03-01

    Production-limiting diseases in swine caused by Brachyspira are characterized by mucohemorrhagic diarrhea (B. hyodysenteriae and "B. hampsonii") or mild colitis (B. pilosicoli), while B. murdochii is often isolated from healthy pigs. Emergence of novel pathogenic Brachyspira species and strains with reduced susceptibility to commonly used antimicrobials has reinforced the need for standardized susceptibility testing. Two methods are currently used for Brachyspira susceptibility testing: agar dilution (AD) and broth microdilution (BMD). However, these tests have primarily been used for B. hyodysenteriae and rarely for B. pilosicoli. Information on the use of commercial susceptibility testing products such as antibiotic gradient strips is lacking. Our main objective was to validate and compare the susceptibility results, measured as the minimum inhibitory concentration (MIC), of 6 antimicrobials for 4 Brachyspira species (B. hyodysenteriae, "B. hampsonii", B. pilosicoli, and B. murdochii) by BMD and AD (tiamulin, valnemulin, lincomycin, tylosin, and carbadox) or antibiotic gradient strip (doxycycline) methods. In general, the results of a high percentage of all 4 Brachyspira species differed by ±1 log2 dilution or less by BMD and AD for tiamulin, valnemulin, lincomycin, and tylosin, and by BMD and antibiotic gradient strip for doxycycline. The carbadox MICs obtained by BMD were 1-5 doubling dilutions different than those obtained by AD. BMD for Brachyspira was quicker to perform with less ambiguous interpretation of results when compared with AD and antibiotic gradient strip methods, and the results confirm the utility of BMD in routine diagnostics. PMID:26965233

  4. Use of urease-bromothymol blue-agar method for large-scale testing of urine on grain and seeds.

    PubMed

    Valdes, P A; Ziobro, G C; Ferrera, R S

    1996-01-01

    The current AOAC method (963.28) for large-scale (50 g) testing of urine on grain is based on the reaction of sodium in urine with magnesium uranyl acetate. Detection of sodium suggests that urine is present and that a test for urea is appropriate. Urea is detected with urease-bromothymol blue-paper and is confirmed through its reaction with xanthydrol to form dixanthylurea crystals, which are detected microscopically. The initial nonspecific test for sodium can be influenced by the presence of salt or other sodium compounds. Furthermore, the magnesium uranyl acetate spray used in Method 963.28 potentially exposes the analyst to the aerosol of a volatile, toxic uranium compound. Excess reagents and analyzed test portions must be disposed of as radioactive waste. In addition, Method 963.28 requires several steps to determine the presence of urea. The alternative AOAC method (972.41) tests for the presence of urea from urine on individual seeds. Urea is enzymatically decomposed to ammonia and carbon dioxide by urease. Liberated ammonia shifts the pH, changing the color of the indicator in the agar from yellow to blue. This study adapts Method 972.41 to larger test samples. Up to 25 g grains and seeds are sprayed with urease test agar instead of being individually immersed in the urease test agar. The modified method was used to analyze urea on seeds and grains of 24 plants from 4 families. The method has a limit of detection of one seed contaminated with 1 microgram urea. PMID:8757445

  5. Time- and media-saving testing and identification of microorganisms by multipoint inoculation on undivided agar plates.

    PubMed Central

    Burman, L G; Ostensson, R

    1978-01-01

    Motility and various biochemical activities of isolates of bacteria and yeasts were tested on undivided agar plates by using a simple, manually operated multipoint inoculation apparatus that allowed the analysis of 25 isolates per 9-cm-diameter petri plate. Fermentation of all 17 carbohydrates tested as well as 13 other biochemical activities commonly used for identification of bacteria were readily demonstrated by the multipoint inoculation plate method, and the results agreed very well with those of conventional tube tests. In addition to speedy inoculation and low cost of materials, the multipoint inoculation plate method offers several other advantages when compared with conventional tube tests or with some of the manufactured test kits currently available for recognizing members of the family Enterobacteriaceae. Images PMID:359588

  6. Final report from the Committee on Antimicrobial Susceptibility Testing, Japanese Society of Chemotherapy, on the agar dilution method (2007).

    PubMed

    Nagayama, Ariaki; Yamaguchi, Keizo; Watanabe, Kunitomo; Tanaka, Masatoshi; Kobayashi, Intetsu; Nagasawa, Zenzo

    2008-10-01

    In 1968, the agar dilution method was developed as an independent Japanese method for measuring the minimal inhibitory concentration (MIC) of antimicrobial agents. As this method differed in a few respects from the MIC measurement methods used in other countries, it was revised in 1981, by a committee headed by Susumu Mitsuhashi, and the revised method (Chemotherapy 29:76-79, 1981) has been used since then. In 1979, an agar dilution method for measuring the MIC of anaerobes was developed by a committee chaired by Nozomu Kosakai (Chemotherapy 27:559-561, 1979). In 1990, a committee headed by Sachiko Goto approved a broth microdilution method for nonfastidious bacteria (Chemotherapy 38:102-105, 1990). Later, a committee headed by Atsushi Saito examined media that would be suitable for nonfastidious bacteria and fastidious bacteria, and they endeavored to prepare a broth microdilution method for anaerobic bacteria. In this context, a new broth microdilution method was proposed at the 40th Annual Meeting of the Japanese Society of Chemotherapy (JSC) in Nagoya in 1992, and the proposal was adopted as the standard JSC method after some modification (Chemotherapy 41: 183-189, 1993). The agar dilution method has remained unrevised for approximately 20 years. A proposal to review this method was recently made, and the 2007 Committee on Antimicrobial Susceptibility Testing was formed, comprising the JSC members listed below. Under the auspices of this committee, the method revised in 1981 was reviewed in comparison to the international standard method (Clinical and Laboratory Standards Institute [CLSI] method). PMID:18936894

  7. Comparison of different agar diffusion methods for the detection of residues in the kidneys of pigs treated with antimicrobial drugs.

    PubMed

    Korkeala, H; Sorvettula, O; Mäki-Petäys, O; Hirn, J

    1983-01-01

    Residue analyses of the kidneys of twenty-six pigs treated with various antimicrobial drugs 20 h before slaughter and of eleven untreated pigs were performed. The effects of storage temperature of the kidneys, and of sampling location, on the residue analysis were also studied. No method alone was sufficient for the detection of residues. Oxytetracycline residues could be detected at pH 6, dihydrostreptomycin residues at pH 8, and sulphonamide residues if trimethoprim was present in the medium. Chloramphenicol, penicillin G procaine, tylosin and lincomycin residues were not detectable with the methods used. The concentration of ampicillin decreased during the storage of samples at +4°C. Most methods also yielded zones of inhibition for the frozen kidneys from untreated pigs. It seems necessary to use agar media of two different pH values: the addition of trimethoprim to the medium is also needed. The use of fresh pig kidneys, and samples containing both kidney medulla and kidney cortex, is recommended in residue analysis. PMID:22055926

  8. Agar gel immunodiffusion test for the detection of bovine leukemia virus antibodies: lack of trans-Atlantic standardization.

    PubMed Central

    Simard, C; Richardson, S; Dixon, P; Komal, J

    2000-01-01

    Two agar gel immunodiffusion (AGID) kits for the serodiagnosis of bovine leukemia virus (BLV) were imported from Europe and were compared with North American kits. The BLV AGID kits from North America and from Europe differed significantly. The punches were different, as were the pattern distribution in the agar of the reference and the test sera, resulting in differences in the reading of the immunoprecipitation lines. Based on the testing of 1200 serum samples from cattle, the European kits gave a good correlation with the American kits, as indicated by their respective kappa values. However, the European kits were found to be less sensitive when evaluated against weakly positive samples from field specimens or following a dilution trial. Only 65% and 50% of the weakly positive samples detected by the American kit #1 were detected by the European kits #2 and #3, respectively. The American kit was also capable of detecting BLV antibodies in 45% of strongly positive samples diluted 1/50 in negative sera, while antibodies were detected in only 15% of the samples with the European kit #2 and in none of the samples with the European kit #3. False negatives were also detected with the European kits. Among the false negatives, the degree of expected reactions was weak (European kit #2) or of varying degrees of positivity (European kit #3). Besides the differences in format and performance, the BLV-AGID kits in Europe are evaluated with the National Standard Serum E4 while a proficiency panel composed of a quadruplicate set of 10 reference sera is used in Canada to monitor the kits. Based on the overall observations, we noted a lack of standardization between the BLV-AGID kits used in North America and in Europe. PMID:10805247

  9. Disk Diffusion Testing Using Candida sp. Colonies Taken Directly from CHROMagar Candida Medium May Decrease Time Required To Obtain Results

    PubMed Central

    Klevay, Michael; Ebinger, Alex; Diekema, Daniel; Messer, Shawn; Hollis, Richard; Pfaller, Michael

    2005-01-01

    We compared results of disk diffusion antifungal susceptibility testing from Candida sp. strains passaged on CHROMagar and on potato dextrose agar. The overall categorical agreements for fluconazole and voriconazole disk testing were 95% and 98% with 0% and 0.5% very major errors, respectively. Disk diffusion testing by the CLSI (formerly NCCLS) M44-A method can be performed accurately by taking inocula directly from CHROMagar. PMID:16000489

  10. Direct disk diffusion test using European Clinical Antimicrobial Susceptibility Testing breakpoints provides reliable results compared with the standard method

    PubMed Central

    Stokkou, Sofia; Geginat, Gernot; Schlüter, Dirk

    2015-01-01

    Sepsis represents a life-threatening infection requiring the immediate start of antibacterial treatment to reduce morbidity. Thus, laboratories use direct antimicrobial susceptibility testing (AST) to rapidly generate preliminary results from positive blood cultures. As the direct AST has not yet been published to be evaluated with EUCAST breakpoints, the purpose of the study was to investigate the reliability of the direct agar diffusion test to correctly produce AST results from positive monobacterial blood cultures compared with the VITEK2-based definitive AST, when current EUCAST breakpoints were used. A total of 428 isolates from unselected monobacterial routine blood cultures and 110 challenge strains were included. Direct agar diffusion-based and standard VITEK2-based AST of 2803 bacterium–drug combinations yielded a total clinical category agreement of 95.47% with 1.28% very major errors and 3.42% combined major and minor errors. On the species level, very major errors were observed in the species–drug combinations Enterococcus spp.–high-level gentamicin (10.87%) and Staphylococcus spp.–rifampicin (5%), only. No very major errors occurred with Enterobacteriaceae and Pseudomonas aeruginosa. In most species–drug combinations, the direct agar diffusion test using EUCAST breakpoints precisely predicted the result of the definitive antibiotic susceptibility test and, thus, it can be used to optimize empiric antibiotic therapy until definitive results are available. PMID:25883798

  11. Direct disk diffusion test using European Clinical Antimicrobial Susceptibility Testing breakpoints provides reliable results compared with the standard method.

    PubMed

    Stokkou, Sofia; Geginat, Gernot; Schlüter, Dirk; Tammer, Ina

    2015-03-01

    Sepsis represents a life-threatening infection requiring the immediate start of antibacterial treatment to reduce morbidity. Thus, laboratories use direct antimicrobial susceptibility testing (AST) to rapidly generate preliminary results from positive blood cultures. As the direct AST has not yet been published to be evaluated with EUCAST breakpoints, the purpose of the study was to investigate the reliability of the direct agar diffusion test to correctly produce AST results from positive monobacterial blood cultures compared with the VITEK2-based definitive AST, when current EUCAST breakpoints were used. A total of 428 isolates from unselected monobacterial routine blood cultures and 110 challenge strains were included. Direct agar diffusion-based and standard VITEK2-based AST of 2803 bacterium-drug combinations yielded a total clinical category agreement of 95.47% with 1.28% very major errors and 3.42% combined major and minor errors. On the species level, very major errors were observed in the species-drug combinations Enterococcus spp.-high-level gentamicin (10.87%) and Staphylococcus spp.-rifampicin (5%), only. No very major errors occurred with Enterobacteriaceae and Pseudomonas aeruginosa. In most species-drug combinations, the direct agar diffusion test using EUCAST breakpoints precisely predicted the result of the definitive antibiotic susceptibility test and, thus, it can be used to optimize empiric antibiotic therapy until definitive results are available. PMID:25883798

  12. Modified agar dilution susceptibility testing method for determining in vitro activities of antifungal agents, including azole compounds.

    PubMed Central

    Yoshida, T; Jono, K; Okonogi, K

    1997-01-01

    In vitro activities of antifungal agents, including azole compounds, against yeasts were easily determined by using RPMI-1640 agar medium and by incubating the plates in the presence of 20% CO2. The end point of inhibition was clear by this method, even in the case of azole compounds, because of the almost complete inhibition of yeast growth at high concentrations which permitted weak growth of some Candida strains by traditional methods. MICs obtained by the agar dilution method were similar to those obtained by the broth dilution method proposed by the National Committee for Clinical Laboratory Standards. PMID:9174197

  13. Susceptibility testing of Actinobacillus pleuropneumoniae in Denmark. Evaluation of three different media of MIC-determinations and tablet diffusion tests.

    PubMed

    Aarestrup, F M; Jensen, N E

    1999-02-12

    This study was conducted to compare the applicability of three different media in sensitivity testing of Actinobacillus pleuropneumoniae by means of MIC and tablet diffusion tests. The media used were: modified PPLO agar, chocolatized Mueller-Hinton-II and Columbia agar supplemented with NAD. Seven antimicrobial agents were tested: ceftiofur, enrofloxacin, penicillin, spectinomycin, tiamulin, trimethoprim + sulfadiazine and tylosin, against 40 randomly selected A. pleuropneumoniae isolates. In general, good agreement was found between results obtained with all combinations of media, most antimicrobials tested and the two-test systems. Some variations between media were observed for spectinomycin, tiamulin and tylosin. For ceftiofur and trimethoprim + sulfadiazine some isolates with low MIC-values were classified as resistant using tablet diffusion, indicating that the break points of resistance for these antimicrobials using the tablet diffusion tests need adjustment. Using current break points for resistance with MIC-determinations, all isolates tested susceptible to ceftiofur, enrofloxacin, penicillin, tiamulin and trimethoprim + sulfadiazine. A larger number of isolates tested resistant to spectinomycin and tylosin on all three media using both MIC determinations and tablet diffusion. PMID:10063535

  14. A3 Subscale Diffuser Test Article Design

    NASA Technical Reports Server (NTRS)

    Saunders, G. P.

    2009-01-01

    This paper gives a detailed description of the design of the A3 Subscale Diffuser Test (SDT) Article Design. The subscale diffuser is a geometrically accurate scale model of the A3 altitude rocket facility. It was designed and built to support the SDT risk mitigation project located at the E3 facility at Stennis Space Center, MS (SSC) supporting the design and construction of the A3 facility at SSC. The subscale test article is outfitted with a large array of instrumentation to support the design verification of the A3 facility. The mechanical design of the subscale diffuser and test instrumentation are described here

  15. 21 CFR 582.7115 - Agar-agar.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Agar-agar. 582.7115 Section 582.7115 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7115 Agar-agar. (a) Product. Agar-agar. (b) Conditions of use. This substance is generally recognized as safe when used...

  16. 21 CFR 582.7115 - Agar-agar.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Agar-agar. 582.7115 Section 582.7115 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7115 Agar-agar. (a) Product. Agar-agar. (b) Conditions of use. This substance is generally recognized as safe when used...

  17. JOHNSON-MATTHEY DIFFUSER CHARACTERIZATION TESTING

    SciTech Connect

    Foster, P; James Klein, J; Henry Sessions, H; Gregg Morgan, G

    2007-08-02

    A diffuser/permeator commercially fabricated by Johnson-Matthey was purchased for characterization testing at the Savannah River National Laboratory (SRNL). A test system was fabricated to not only feed and bleed flows and pressures, but also permeate pressure for flows up to 20 SLPM.

  18. Johnson-Matthey diffuser characterization testing

    SciTech Connect

    Foster, P. J.; Klein, J. E.; Sessions, H. T.; Morgan, G. A.

    2008-07-15

    A diffuser/permeator commercially fabricated by Johnson-Matthey was purchased for characterization testing at the Savannah River National Laboratory (SRNL). A test system was fabricated to test not only feed and bleed flows and pressures, but also permeate pressure for flows up to 20 sLPM. The tests described in this paper consider the effect of various inert gas types, feed gas compositions, methods for temperature control, and varying tube pressure on permeation of H{sub 2} through the Pd/Ag tubes. (authors)

  19. Comparative Analysis of Disc Diffusion and E-test with Broth Micro-dilution for Susceptibility Testing of Clinical Candida Isolates Against Amphotericin B, Fluconazole, Voriconazole and Caspofungin

    PubMed Central

    Bhattacharyya, Sayan; Gupta, Prashant; Banerjee, Gopa; Singh, Mastan

    2015-01-01

    Background Antifungal susceptibility testing remains an area of intense interest because of the increasing number of clinical isolates resistant to antifungal therapy. Clinical and Laboratory Standards Institute has proposed reference broth micro dilution (BMD) method for susceptibility testing. The reference method is time-consuming and poorly suited for the routine clinical laboratory setting. Agar-based susceptibility testing methods, disk diffusion (DD) method and the E-test method can be an easier, reliable and less time consuming alternative for the BMD method. Aim To compare the results of Amphotericin B, fluconazole, voriconazole, and Caspofungin susceptibility testing by DD, and the E-test method with the CLSI reference method for clinical Candida isolates. Materials and Methods Broth Microdilution (BMD), E-test and Disk diffusion testing of the various clinical Candida isolates was performed in accordance with CLSI documents. The results obtained were analysed and compared. Results The categorical agreement for Amphotericin B, fluconazole, voriconazole, and Caspofungin susceptibility results by E-test and DD method was 65.2%, 67.4%; 100%, 82.6%; 100%, 100%; 100%, 97.8% respectively. Conclusion The agar-based E-test and disk diffusion methods are reliable alternatives to the BMD method for Candida isolates when test susceptible to fluconazole, voriconazole, and Caspofungin, however the susceptibility testing results must be interpreted with caution in case of Amphotericin B. PMID:26675415

  20. Optimal inoculation methods and quality control for the NCCLS oxacillin agar screen test for detection of oxacillin resistance in Staphylococcus aureus.

    PubMed

    Swenson, J M; Spargo, J; Tenover, F C; Ferraro, M J

    2001-10-01

    To define more precisely the inoculation methods to be used in the oxacillin screen test for Staphylococcus aureus, we tested agar screen plates prepared in house with 6 microg of oxacillin/ml and 4% NaCl using the four different inoculation methods that would most likely be used by clinical laboratories. The organisms selected for testing were 19 heteroresistant mecA-producing strains and 41 non-mecA-producing strains for which oxacillin MICs were near the susceptible breakpoint. The inoculation method that was preferred by all four readers and that resulted in the best combination of sensitivity and specificity was a 1-microl loopful of a 0.5 McFarland suspension. A second objective of the study was to then use this method to inoculate plates from five different manufacturers of commercially prepared media. Although all commercial media performed with acceptable sensitivity compared to the reference lot, one of the commercial lots demonstrated a lack of specificity. Those lots of oxacillin screen medium that fail to grow heteroresistant strains can be detected by using S. aureus ATCC 43300 as a positive control in the test and by using transmitted light to carefully examine the plates for any growth. However, lack of specificity with commercial lots may be difficult to detect using any of the current quality control organisms. PMID:11574618

  1. Reduced turn-around time for Mycobacterium tuberculosis drug susceptibility testing with a proportional agar microplate assay.

    PubMed

    Nguyen, V A T; Nguyen, H Q; Vu, T T; Nguyen, N A T; Duong, C M; Tran, T H T; Nguyen, H V; Dang, D A; Bañuls, A-L

    2015-12-01

    Multidrug-resistant tuberculosis is a major issue worldwide; however, accessibility to drug susceptibility testing (DST) is still limited in developing countries, owing to high costs and complexity. We developed a proportion method on 12-well microplates for DST. The assay reduced the time to results to <12 days and <10 days when bacterial growth was checked with the naked eye or a microscope, respectively. Comparison with the Canetti-Grosset method showed that the results of the two assays almost overlapped (kappa index 0.98 (95% CI 0.91-1.00) for isoniazid, rifampicin, streptomycin; and kappa index 0.92 (95% CI 0.85-0.99) for ethambutol). The sequencing of genes involved in drug resistance showed similar level of phenotype-genotype agreement between techniques. Finally, measurement of the MICs of rifampicin and ethambutol suggests that the currently used critical ethambutol concentration should be revised, and that the current molecular drug susceptibility tests for rifampicin need to be re-evaluated, as in vitro rifampicin-sensitive isolates could harbour drug resistance-associated mutation(s). PMID:26348263

  2. Novel Single-Tube Agar-Based Test System for Motility Enhancement and Immunocapture of Escherichia coli O157:H7 by H7 Flagellar Antigen-Specific Antibodies

    PubMed Central

    Murinda, Shelton E.; Nguyen, Lien T.; Ivey, Susan J.; Almeida, Raul A.; Oliver, Stephen P.

    2002-01-01

    This paper describes a novel single-tube agar-based technique for motility enhancement and immunoimmobilization of Escherichia coli O157:H7. Motility indole ornithine medium and agar (0.4%, wt/vol) media containing either nutrient broth, tryptone broth, or tryptic soy broth (TSBA) were evaluated for their abilities to enhance bacterial motility. Twenty-six E. coli strains, including 19 O157:H7 strains, 1 O157:H− strain, and 6 generic E. coli strains, were evaluated. Test bacteria were stab inoculated in the center of the agar column, and tubes were incubated at 37°C for 18 to 96 h. Nineteen to 24 of the 26 test strains (73.1 to 92.3%) were motile in the different media. TSBA medium performed best and was employed in subsequent studies of motility enhancement and H7 flagellar immunocapture. H7 flagellar antiserum (30 and 60 μl) mixed with TSBA was placed as a band (1 ml) in the middle of an agar column separating the top (3-ml) and bottom (3-ml) agar layers. The top agar layer was inoculated with the test bacterial strains. The tubes were incubated at 37°C for 12 to 18 h and for 18 to 96 h. The specificity and sensitivity of the H7 flagellar immunocapture tests were 75 and 100%, respectively. The procedure described is simple and sensitive and could be adapted easily for routine use in laboratories that do not have sophisticated equipment and resources for confirming the presence of H7 flagellar antigens. Accurate and rapid identification of H7 flagellar antigen is critical for the complete characterization of E. coli O157:H7, owing to the immense clinical, public health, and economic significance of this food-borne pathogen. PMID:12454173

  3. Validation of the Use of Middlebrook 7H10 Agar, BACTEC MGIT 960, and BACTEC 460 12B Media for Testing the Susceptibility of Mycobacterium tuberculosis to Levofloxacin

    PubMed Central

    Sanders, Cynthia A.; Nieda, Rachel R.; Desmond, Edward P.

    2004-01-01

    Levofloxacin, the active l-isomer of the quinolone ofloxacin, is now widely accepted for treatment of multidrug-resistant tuberculosis. Because the drug is now widely used, we sought to establish susceptibility test conditions for Mycobacterium tuberculosis against levofloxacin by the traditional reference method, agar proportion (AP), the commonly used BACTEC 460 radiometric system, and the newer BACTEC MGIT 960 method. To determine the stability of levofloxacin in the two newer test systems (BACTEC 460 and BACTEC MGIT 960), media containing subinhibitory levels of levofloxacin were prepared and stored at 4 and 37°C for 14 days. The stored media were inoculated with H37Rv, and the drug activity was compared to freshly prepared media. Results show that levofloxacin is stable over the course of testing. Next, optimum levofloxacin test concentrations were determined for AP, BACTEC 460, and BACTEC MGIT 960 methods. MICs were determined for 32 pan-susceptible isolates of M. tuberculosis obtained from presumably untreated patients and 14 quinolone-resistant isolates. The levofloxacin-resistant strains either were isolated from patients who remained culture-positive despite treatment with a quinolone agent (six strains) or contained known mutations in gyrA (eight strains). Levofloxacin MICs resulted in a bimodal pattern with values for resistant strains consistently higher than those for pan-susceptible strains. Results show that levofloxacin concentrations of 2 μg/ml (BACTEC 460 and BACTEC MGIT 960) and 1 μg/ml (AP) inhibited the growth of all pan-susceptible strains while permitting the growth of all levofloxacin-resistant strains. Confirmatory tests with a subset of pan-susceptible and levofloxacin-resistant isolates validated the selected test concentrations. PMID:15528718

  4. Screening fungicides for use in fish culture: Evaluation of the agar plug transfer, cellophane transfer, and agar dilution methods

    USGS Publications Warehouse

    Bailey, Tom A.

    1983-01-01

    The reliability, reproducibility, and usefulness of three screening methods -- the cellophane transfer, the agar plug transfer, and the agar dilution -- to screen aquatic fungicides were evaluated. Achlya flagellata and Saprolegnia hypogyna were exposed to 1, 10, and 100 mg/L of malachite green to test each method. The cellophane transfer and agar plug transfer techniques had similar reliability and reproducibility in rating fungicidal activity, and were both superior to the agar dilution technique. The agar plug transfer and agar dilution techniques adequately projected in vivo activity of malachite green, but the cellophane transfer technique overestimated its activity. Overall, the agar plug transfer technique most accurately rated the activity of malachite green and was the easiest test to perform. It therefore appears to be the method of choice for testing aquatic fungicides.

  5. Agar agar-stabilized milled zerovalent iron particles for in situ groundwater remediation.

    PubMed

    Velimirovic, Milica; Schmid, Doris; Wagner, Stephan; Micić, Vesna; von der Kammer, Frank; Hofmann, Thilo

    2016-09-01

    Submicron-scale milled zerovalent iron (milled ZVI) particles produced by grinding macroscopic raw materials could provide a cost-effective alternative to nanoscale zerovalent iron (nZVI) particles for in situ degradation of chlorinated aliphatic hydrocarbons in groundwater. However, the aggregation and settling of bare milled ZVI particles from suspension presents a significant obstacle to their in situ application for groundwater remediation. In our investigations we reduced the rapid aggregation and settling rate of bare milled ZVI particles from suspension by stabilization with a "green" agar agar polymer. The transport potential of stabilized milled ZVI particle suspensions in a diverse array of natural heterogeneous porous media was evaluated in a series of well-controlled laboratory column experiments. The impact of agar agar on trichloroethene (TCE) removal by milled ZVI particles was assessed in laboratory-scale batch reactors. The use of agar agar significantly enhanced the transport of milled ZVI particles in all of the investigated porous media. Reactivity tests showed that the agar agar-stabilized milled ZVI particles were reactive towards TCE, but that their reactivity was an order of magnitude less than that of bare, non-stabilized milled ZVI particles. Our results suggest that milled ZVI particles could be used as an alternative to nZVI particles as their potential for emplacement into contaminated zone, their reactivity, and expected longevity are beneficial for in situ groundwater remediation. PMID:26596889

  6. Comparison of Sorbitol MacConkey Agar and a Two-Step Method Which Utilizes Enzyme-Linked Immunosorbent Assay Toxin Testing and a Chromogenic Agar To Detect and Isolate Enterohemorrhagic Escherichia coli

    PubMed Central

    Novicki, Thomas J.; Daly, Judy A.; Mottice, Susan L.; Carroll, Karen C.

    2000-01-01

    Enterohemorrhagic Escherichia coli (EHEC) and specifically serotype O157:H7 are a significant cause of hemorrhagic gastrointestinal disease and the hemolytic uremic syndrome. Methods currently used in clinical microbiology labs, such as sorbitol-MacConkey (SMAC) agar, reliably detect only O157:H7. We have evaluated a two-step method that has the potential to identify and isolate all EHEC serotypes, including serotype O157:H7. This method utilizes a chromogenic selective-differential medium for the isolation of E. coli together with an enzyme-linked immunosorbent assay (ELISA) that detects the Shiga-like toxins Stx1 and Stx2. Both are commercially available and usable in a wide range of clinical microbiology laboratories. Compared to a Vero cell cytotoxic assay, SMAC had sensitivities of 23.5% for the identification of all EHEC serotypes and of 50.0% for the identification of O157:H7 alone. The two-step method had sensitivities of 76.5 and 100%, respectively. The ELISA alone had a sensitivity of 82.4% in the detection of Stx1 and Stx2. The specificity was 100% in all cases. Overall, 14 EHEC isolates were obtained: 8 (58%) O157:H7, 2 (14%) O26, 2 (14%) O111:NM, 1 (7%) O103:H2, and 1 (7%) O121:H19. All but one were isolated during the months of May to September. The two-step method was found to be considerably more expensive than SMAC for both positive and negative samples. PMID:10655343

  7. Modeling Antimicrobial Activity of Clorox(R) Using an Agar-Diffusion Test: A New Twist On an Old Experiment.

    ERIC Educational Resources Information Center

    Mitchell, James K.; Carter, William E.

    2000-01-01

    Describes using a computer statistical software package called Minitab to model the sensitivity of several microbes to the disinfectant NaOCl (Clorox') using the Kirby-Bauer technique. Each group of students collects data from one microbe, conducts regression analyses, then chooses the best-fit model based on the highest r-values obtained.…

  8. Comparison of Etest, disk diffusion, and broth macrodilution for in vitro susceptibility testing of Rhodococcus equi.

    PubMed

    Berghaus, Londa J; Giguère, Steeve; Guldbech, Kristen; Warner, Eleanor; Ugorji, Ukachi; Berghaus, Roy D

    2015-01-01

    MICs of erythromycin, clarithromycin, azithromycin, rifampin, gentamicin, and doxycycline against 101 isolates of Rhodococcus equi were determined by broth macrodilution, disk diffusion, and Etest. Categorical agreement ranged between 85.1 and 100%. Overall, the agreement between Etest and disk diffusion was better than the agreement between broth macrodilution and the agar-based methods. PMID:25378571

  9. Comparison of Etest, Disk Diffusion, and Broth Macrodilution for In Vitro Susceptibility Testing of Rhodococcus equi

    PubMed Central

    Berghaus, Londa J.; Guldbech, Kristen; Warner, Eleanor; Ugorji, Ukachi; Berghaus, Roy D.

    2014-01-01

    MICs of erythromycin, clarithromycin, azithromycin, rifampin, gentamicin, and doxycycline against 101 isolates of Rhodococcus equi were determined by broth macrodilution, disk diffusion, and Etest. Categorical agreement ranged between 85.1 and 100%. Overall, the agreement between Etest and disk diffusion was better than the agreement between broth macrodilution and the agar-based methods. PMID:25378571

  10. An Overview of the A-3 Subscale Diffuser Test Project

    NASA Technical Reports Server (NTRS)

    Ryan, James E.; Mulkey, Christopher; Raines, Nickey; Saunders, Grady P.

    2008-01-01

    The Subscale Diffuser Test (SDT) Project comprised a series of tests of a subscale model of SSC s A-3 Test Stand diffuser. SDT was conducted at NASA s Stennis Space Center (SSC) Apr 2007 - Jan 2008. Purpose of SDT was to mitigate design risk for the A-3 diffuser. Initial scope of the SDT project successfully completed in Jan 2008. Follow-on A-3 risk mitigation testing being planned/considered. This presentation presents an overview of the SDT project.

  11. Electro-osmosis in gels: Application to Agar-Agar

    NASA Astrophysics Data System (ADS)

    Cherblanc, Fabien; Boscus, Jérôme; Bénet, Jean-Claude

    2008-10-01

    Widely used in food- and bio-engineering as a reference material, Agar-Agar gel is the focus of an experimental investigation concerning the electro-osmosis phenomenon. After presenting the experimental methods, one trial is discussed in detail. A fair reproducibility of results is obtained, and the averaged electro-osmotic permeability is provided. This value lies in the range generally measured on various kind of soils, even if Agar-Agar gel does not share any micro-structural characteristics with soils. To cite this article: F. Cherblanc et al., C. R. Mecanique 336 (2008).

  12. Effect of BiTek agar on lysostaphin susceptibility of staphylococci.

    PubMed Central

    Langlois, B E; Dawson, K; Akers, K

    1990-01-01

    Staphylococci which were considered to be lysostaphin susceptible on P agar containing Bacto-Agar showed different degrees of resistance to lysostaphin when tested on P agar made with BiTek agar. As a result, lysostaphin-susceptible strains were misidentified as lysostaphin-resistant strains. Images PMID:2254432

  13. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  14. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  15. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1115...

  16. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  17. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD... ingredient meets the specifications of the “Food Chemicals Codex,” 3d Ed. (1981), p. 11, which...

  18. Improving agar electrospinnability with choline-based deep eutectic solvents.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-09-01

    Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up. One weight percent agar-in-DES showed improved viscoelasticity and hence, spinnability, when compared to 1 wt% agar-in-water and pure agar nanofibers were successfully electrospun if working above the temperature of sol-gel transition (∼80 °C). By changing the solvent medium we decreased the PVA concentration (5 wt% starting solution) and successfully produced composite fibers with high agar contents (50/50 agar/PVA). Best composite fibers were formed with the 50/50 and 30/70 agar/PVA solutions. These fibers were mechanically resistant, showed tailorable surface roughness and diverse size distributions, with most of the diameters falling in the sub-micron range. Both nano and micro forms of agar fibers (used separately or combined) may have potential for the design of new and highly functional agar-based materials. PMID:26116384

  19. Automatic agar tray inoculation device

    NASA Technical Reports Server (NTRS)

    Wilkins, J. R.; Mills, S. M.

    1972-01-01

    Automatic agar tray inoculation device is simple in design and foolproof in operation. It employs either conventional inoculating loop or cotton swab for uniform inoculation of agar media, and it allows technician to carry on with other activities while tray is being inoculated.

  20. Direct comparison of the Ames microplate format (MPF) test in liquid medium with the standard Ames pre-incubation assay on agar plates by use of equivocal to weakly positive test compounds.

    PubMed

    Flückiger-Isler, Sini; Kamber, Markus

    2012-08-30

    The Ames microplate format (MPF™) test, which uses liquid media and in 384-well microplates with a readout based on a colour-change, has been used for over 10 years at several major pharmaceutical companies for screening the genotoxic potential of early drug candidates when compound supply is minimal. Meanwhile, Xenometrix has adapted this screen from the two-strain Ames II test for use with five tester strains, in compliance with OECD Guideline 471. A set of 15 equivocal to weakly positive chemicals selected from the National Toxicology Program (NTP) database was tested simultaneously in the Ames microplate format (MPF) and the standard Ames pre-incubation method on agar plates. Such a direct comparison of the two test methods with the same overnight culture(s), chemicals and S9-mix preparation should exclude external variability factors. Thirteen of the 15 chemicals showed concordant results in both tests despite the choice of chemicals that showed varying inter- and even intra-laboratory results in the NTP studies. These results indicate that the Ames MPF™ assay is a reliable predictive tool that can be used like the regular Ames test to evaluate compounds for mutagenicity. PMID:22579797

  1. Development of a selective agar plate for the detection of Campylobacter spp. in fresh produce.

    PubMed

    Yoo, Jin-Hee; Choi, Na-Young; Bae, Young-Min; Lee, Jung-Su; Lee, Sun-Young

    2014-10-17

    This study was conducted to develop a selective medium for the detection of Campylobacter spp. in fresh produce. Campylobacter spp. (n=4), non-Campylobacter (showing positive results on Campylobacter selective agar) strains (n=49) isolated from fresh produce, indicator bacteria (n=13), and spoilage bacteria isolated from fresh produce (n=15) were plated on four Campylobacter selective media. Bolton agar and modified charcoal cefoperazone deoxycholate agar (mCCDA) exhibited higher sensitivity for Campylobacter spp. than did Preston agar and Hunt agar, although certain non-Campylobacter strains isolated from fresh produce by using a selective agar isolation method, were still able to grow on Bolton agar and mCCDA. To inhibit the growth of non-Campylobacter strains, Bolton agar and mCCDA were supplemented with 5 antibiotics (rifampicin, polymyxin B, sodium metabisulfite, sodium pyruvate, ferrous sulfate) and the growth of Campylobacter spp. (n=7) and non-Campylobacter strains (n=44) was evaluated. Although Bolton agar supplemented with rifampicin (BR agar) exhibited a higher selectivity for Campylobacter spp. than did mCCDA supplemented with antibiotics, certain non-Campylobacter strains were still able to grow on BR agar (18.8%). When BR agar with various concentrations of sulfamethoxazole-trimethoprim were tested with Campylobacter spp. (n=8) and non-Campylobacter (n=7), sulfamethoxazole-trimethoprim was inhibitory against 3 of 7 non-Campylobacter strains. Finally, we validated the use of BR agar containing 50mg/L sulfamethoxazole (BRS agar) or 0.5mg/L ciprofloxacin (BRCS agar) and other selective agars for the detection of Campylobacter spp. in chicken and fresh produce. All chicken samples were positive for Campylobacter spp. when tested on mCCDA, BR agar, and BRS agar. In fresh produce samples, BRS agar exhibited the highest selectivity for Campylobacter spp., demonstrating its suitability for the detection of Campylobacter spp. in fresh produce. PMID:25126968

  2. Lecithin-agar assay for lecithinase antibodies in serum.

    PubMed

    Sibinovic, K H; Brown, F A; Pettigrew, K D; Vought, R L

    1971-01-01

    A technique for assay of lecithinase antibodies in serum was developed in this laboratory by using a lecithin-agar plate diffusion procedure based on a combination of described plate assays. Egg yolk lipoprotein composed primarily of lecithin was used as a substrate for reaction with free or non-neutralized lecithinase C after incubation of known amounts of lecithinase C with various dilutions of control and test sera. It was found that the size of the reaction zone was a function of enzyme concentration and inversely proportional to the antibody concentration. Accuracy and precision of the assay were determined. In addition, lecithinase antibody levels in sera from experimentally inoculated rats and rabbits and sera from randomly selected human patients were studied. PMID:4322282

  3. Lecithin-Agar Assay for Lecithinase Antibodies in Serum

    PubMed Central

    Sibinovic, Kyle H.; Brown, Freddie A.; Pettigrew, Karen D.; Vought, Robert L.

    1971-01-01

    A technique for assay of lecithinase antibodies in serum was developed in this laboratory by using a lecithin-agar plate diffusion procedure based on a combination of described plate assays. Egg yolk lipoprotein composed primarily of lecithin was used as a substrate for reaction with free or non-neutralized lecithinase C after incubation of known amounts of lecithinase C with various dilutions of control and test sera. It was found that the size of the reaction zone was a function of enzyme concentration and inversely proportional to the antibody concentration. Accuracy and precision of the assay were determined. In addition, lecithinase antibody levels in sera from experimentally inoculated rats and rabbits and sera from randomly selected human patients were studied. Images PMID:4322282

  4. Flow generation in a novel centrifugal diffuser test device

    NASA Astrophysics Data System (ADS)

    Vidos, P.

    1983-09-01

    Recognition of the need to develop optimum diffusers for advanced centrifugal compressors, resulted in the design and manufacture of a novel low-speed test facility for centrifugal diffuser testing. The CDTD was designed to allow the flow angle and wall boundary profiles into the test diffuser to be controlled by variable geometry in the flow generator. The present study reports on the design of the flow generator and the analysis of the internal flow using a NASA computer code (MERIDL). First test results are given and are compared with the results of a control volume analysis. The flow angle control technique was found to work effectively but to give somewhat smaller angles (by 4 deg) than were predicted. It was concluded that the information obtained would allow scaling of the device; however, an analysis code was needed which would accept the real physical boundary conditions.

  5. Subscale Diffuser Testing, E-3 produces first steam

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Phase 2 of the A-3 Test Facility Subscale Diffuser Risk Mitigation Project at Stennis Space Center reached a milestone Oct. 25 when the E-3 Test Facility produced superheated (500+ degrees) steam for approximately 3 seconds at more than 400 psi. The test team, led by Barry Robinson of NASA's Test Projects Office, followed that success with further tests to lengthen the duration of steam production. On Nov. 1, they were able to maintain a consistent pressure and temperature of steam for 60 seconds. In December, the team began Phase 3 of the testing, providing data for the design and procurement to build the full-scale version of the steam diffuser for SSC's A-3 Test Stand.

  6. 48 CFR 401.371 - AGAR Advisories.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false AGAR Advisories. 401.371... ACQUISITION REGULATION SYSTEM Agency Acquisition Regulations 401.371 AGAR Advisories. The SPE may issue AGAR Advisories, consistent with the policies of the FAR and the AGAR, for the following purposes: (a)...

  7. 48 CFR 401.371 - AGAR Advisories.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false AGAR Advisories. 401.371... ACQUISITION REGULATION SYSTEM Agency Acquisition Regulations 401.371 AGAR Advisories. The SPE may issue AGAR Advisories, consistent with the policies of the FAR and the AGAR, for the following purposes: (a)...

  8. Characteristic features and dye degrading capability of agar-agar gel immobilized manganese peroxidase.

    PubMed

    Bilal, Muhammad; Asgher, Muhammad; Shahid, Muhammad; Bhatti, Haq Nawaz

    2016-05-01

    Immobilization of enzymes has been regarded as an efficient approach to develop biocatalyst with improved activity and stability characteristics under reaction conditions. In the present study, purified manganese peroxidase (MnP) from Ganoderma lucidum IBL-05 was immobilized in agar-agar support using entrapment technique. Maximum immobilization yield was accomplished at 4.0% agar-agar gel. The immobilized MnP exhibited better resistance to changes in pH and temperature than the free enzyme, with optimal conditions being pH 6.0 and 50 °C. The kinetic parameters Km and Kcat/Km for free and entrapped MnP were calculated to be 65.6 mM and 6.99 M(-1) s(-1), and 82 mM and 8.15 M(-1) s(-1), respectively. Thermo-stability was significantly improved after immobilization. After 120 h, the insolubilized MnP retained its activity up to 71.9% and 60.3% at 30 °C and 40 °C, respectively. It showed activity until 10th cycle and retained 74.3% residual activity after 3th cycle. The effects of H2O2, ionic strength and potential inhibitors on activity of free and immobilized enzyme were investigated. Moreover, the decolorization of three structurally different dyes was monitored in order to assess the degrading capability of the entrapped MnP. The decolorization efficiencies for all the tested dyes were 78.6-84.7% after 12h. The studies concluded that the toxicity of dyes aqueous solutions was significantly reduced after treatment. The remarkable catalytic, thermo-stability and re-cycling features of the agar-agar immobilized MnP display a high potential for biotechnological applications. PMID:26854887

  9. Thermal characterization of magnetically aligned carbonyl iron/agar composites.

    PubMed

    Diaz-Bleis, D; Vales-Pinzón, C; Freile-Pelegrín, Y; Alvarado-Gil, J J

    2014-01-01

    Composites of magnetic particles into polymeric matrices have received increasing research interest due to their capacity to respond to external magnetic or electromagnetic fields. In this study, agar from Gelidium robustum has been chosen as natural biocompatible polymer to build the matrix of the magnetic carbonyl iron particles (CIP) for their uses in biomedical fields. Heat transfer behavior of the CIP-agar composites containing different concentrations (5, 10, 15, 20, 25 and 30% w/w) of magnetically aligned and non-aligned CIP in the agar matrix was studied using photothermal radiometry (PTR) in the back-propagation emission configuration. The morphology of the CIP-agar composites with aligned and non-aligned CIP under magnetic field was also evaluated by scanning electron microscopy (SEM). The results revealed a dominant effect of CIP concentration over the alignment patterns induced by the magnetic field, which agrees with the behavior of the thermal diffusivity and thermal conductivity. Agar served as a perfect matrix to be used with CIP, and CIP-agar composites magnetically aligned at 20% CIP concentration can be considered as promising 'smart' material for hyperthermia treatments in the biomedical field. PMID:24274482

  10. Syneresis and delayed detachment in agar plates.

    PubMed

    Divoux, Thibaut; Mao, Bosi; Snabre, Patrick

    2015-05-14

    Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amounts of solvent. These gels undergo spontaneous aging, called syneresis, which consists of the shrinkage of the gel matrix and the progressive expulsion of solvent. As a result, a biogel originally casted in a container often loses contact with the container sidewalls, and the detachment time is difficult to anticipate a priori, since it may occur over variable time spans (from hours to days). Here we report on syneresis phenomena in agar plates, which consist of Petri dishes filled with a gel mainly composed of agar. Direct observations and speckle pattern correlation analysis allow us to rationalize the delayed detachment of the gel from the sidewall of the Petri dish. The detachment time t* is surprisingly not controlled by the mass loss as one would intuitively expect. Instead, t* is strongly correlated to the gel minimum thickness emin measured along the sidewall of the plate, and increases as a robust function of emin, independently of the prior mass-loss history. Time-resolved correlation spectroscopy atypically applied to such weakly diffusive media gives access to the local thinning rate of the gel. This technique also allows us to detect the gel micro-displacements that are triggered by water evaporation prior to the detachment, and even to anticipate the latter from a few hours. Our work provides observables to predict the detachment time of agar gels in dishes, and highlights the relevance of speckle pattern correlation analysis for the quantitative investigation of the syneresis dynamics in biopolymer gels. PMID:25812667

  11. Test Program for High Efficiency Gas Turbine Exhaust Diffuser

    SciTech Connect

    Norris, Thomas R.

    2009-12-31

    This research relates to improving the efficiency of flow in a turbine exhaust, and thus, that of the turbine and power plant. The Phase I SBIR project demonstrated the technical viability of “strutlets” to control stalls on a model diffuser strut. Strutlets are a novel flow-improving vane concept intended to improve the efficiency of flow in turbine exhausts. Strutlets can help reduce turbine back pressure, and incrementally improve turbine efficiency, increase power, and reduce greenhouse gas emmission. The long-term goal is a 0.5 percent improvement of each item, averaged over the US gas turbine fleet. The strutlets were tested in a physical scale model of a gas turbine exhaust diffuser. The test flow passage is a straight, annular diffuser with three sets of struts. At the end of Phase 1, the ability of strutlets to keep flow attached to struts was demonstrated, but the strutlet drag was too high for a net efficiency advantage. An independently sponsored followup project did develop a highly-modified low-drag strutlet. In combination with other flow improving vanes, complicance to the stated goals was demonstrated for for simple cycle power plants, and to most of the goals for combined cycle power plants using this particular exhaust geometry. Importantly, low frequency diffuser noise was reduced by 5 dB or more, compared to the baseline. Appolicability to other diffuser geometries is yet to be demonstrated.

  12. An Overview of Follow-On Testing Activities of the A-3 Subscale Diffuser Test Project

    NASA Technical Reports Server (NTRS)

    Ryan, James E.

    2009-01-01

    An overview of NASA Stennis Space Center's (SSC) A-3 Subscale Diffuser Test (SDT) Project is presented. The original scope of the SDT Project, conducted from April 2007 to January 2008, collected data to support mitigation of risk associated with design and procurement activities of the A-3 Test Stand Project, an effort to construct a simulated altitude test facility at SSC in support of NASA's Constellation Program. Follow-on tests were conducted from May 2008 through August 2009, utilizing the SDT test setup as a testbed for additional risk mitigation activities. Included are descriptions of the Subscale Diffuser (SD) test article, the test facility configuration, and test approaches.

  13. Simulating diffusion processes in discontinuous media: Benchmark tests

    NASA Astrophysics Data System (ADS)

    Lejay, Antoine; Pichot, Géraldine

    2016-06-01

    We present several benchmark tests for Monte Carlo methods simulating diffusion in one-dimensional discontinuous media. These benchmark tests aim at studying the potential bias of the schemes and their impact on the estimation of micro- or macroscopic quantities (repartition of masses, fluxes, mean residence time, …). These benchmark tests are backed by a statistical analysis to filter out the bias from the unavoidable Monte Carlo error. We apply them on four different algorithms. The results of the numerical tests give a valuable insight into the fine behavior of these schemes, as well as rules to choose between them.

  14. Comparison of chromogenic Biolog Rainbow agar Shigella/Aeromonas with xylose lysine desoxycholate agar for isolation and detection of Shigella spp. from foods.

    PubMed

    Zhang, Guodong; Lampel, Keith A

    2010-08-01

    Shigella outbreaks are widely reported throughout the world. However, it remains a challenge to isolate Shigella spp. from foods by using conventional microbiological media. The main objective of this study was to determine the effectiveness of a novel chromogenic medium, Rainbow agar Shigella/Aeromonas (Rainbow agar), for the isolation and detection of Shigella spp. in foods. All four Shigella species, S. sonnei, S. flexneri, S. dysenteriae, and S. boydii, were studied. Rainbow agar was compared with tryptic soy agar, xylose lysine desoxycholate agar (XLD), and Salmonella Shigella agar (SSA) for enumeration of Shigella spp. in pure culture. This chromogenic agar and XLD were also used to isolate Shigella spp. in artificially contaminated foods (4.8 log CFU/g of food), including lettuce, parsley, cilantro, spinach, potato salad, and shrimp. The inhibitory effect on Shigella growth by Rainbow agar was between that of XLD and SSA. All vegetables studied showed a moderately high background microflora on XLD and Rainbow agar. With artificially inoculated produce, Rainbow agar recovered about 1 to 2 log CFU more S. sonnei, S. dysenteriae, and S. boydii per g of food than did XLD. For potato salad and shrimp, which had low background microflora on Rainbow agar, Rainbow agar was slightly better in recovering Shigella spp. than XLD was in most cases. However, we found that the addition of streptomycin (6.25 mg/liter) to Rainbow agar could facilitate the isolation of Shigella in vegetables tested. In conclusion, Rainbow agar was a much more effective medium than was XLD for the isolation of Shigella spp. from foods. PMID:20819355

  15. Development And Testing Of The Inertial Electrostatic Confinement Diffusion Thruster

    NASA Technical Reports Server (NTRS)

    Becnel, Mark D.; Polzin, Kurt A.

    2013-01-01

    The Inertial Electrostatic Confinement (IEC) diffusion thruster is an experiment in active development that takes advantage of physical phenomenon that occurs during operation of an IEC device. The IEC device has been proposed as a fusion reactor design that relies on traditional electrostatic ion acceleration and is typically arranged in a spherical geometry. The design incorporates two radially-symmetric spherical electrodes. Often the inner electrode utilizes a grid of wire shaped in a sphere with a radius 15 to 50 percent of the radius of the outer electrode. The inner electrode traditionally has 90 percent or more transparency to allow particles (ions) to pass to the center of the spheres and collide/recombine in the dense plasma core at r=0. When operating the IEC, an unsteady plasma leak is typically observed passing out one of the gaps in the lattice grid of the inner electrode. The IED diffusion thruster is based upon the idea that this plasma leak can be used for propulsive purposes. The IEC diffusion thruster utilizes the radial symmetry found in the IEC device. A cylindrical configuration is employed here as it will produce a dense core of plasma the length of the cylindrical grid while promoting the plasma leak to exhaust through an electromagnetic nozzle at one end of the apparatus. A proof-of-concept IEC diffusion thruster is operational and under testing using argon as propellant (Figure 1).

  16. Time-dependent diffusive acceleration of test particles at shocks

    NASA Astrophysics Data System (ADS)

    Drury, L. O'C.

    1991-07-01

    A theoretical description is developed for the acceleration of test particles at a steady plane nonrelativistic shock. The mean and the variance of the acceleration-time distribution are expressed analytically for the condition under which the diffusion coefficient is arbitrarily dependent on position and momentum. The formula for an acceleration rate with arbitrary spatial variation in the diffusion coefficient developed by Drury (1987) is supplemented by a general theory of time dependence. An approximation scheme is developed by means of the analysis which permits the description of the spectral cutoff resulting from the finite shock age. The formulas developed in the analysis are also of interest for analyzing the observations of heliospheric shocks made from spacecraft.

  17. Crystal formation in furunculosis agar

    USGS Publications Warehouse

    Bullock, G.L.; Ross, A.J.

    1964-01-01

    SINCE ITS INTRODUCTION SOME MONTHS AGO, FURUNCULOSIS AGAR has been employed in the diagnosis of suspect furunculosis and also as a general purpose medium. During our work with this medium we have noticed discrete "colonies," of crystalline material, which very closely resemble microbial colonies. These crystal colonies are compact and appear on both the surface and subsurface; they occur in inoculated slants and plates incubated for long periods (2 to 3 weeks), as well as in uninoculated stored medium. As the crystal colonies could be confusing to workers using this medium, we decided to attempt to identify them and also to determine whether storage conditions and different lots of medium affect crystal formation.

  18. Evaluation of an Automated System for Reading and Interpreting Disk Diffusion Antimicrobial Susceptibility Testing of Fastidious Bacteria.

    PubMed

    Idelevich, Evgeny A; Becker, Karsten; Schmitz, Janne; Knaack, Dennis; Peters, Georg; Köck, Robin

    2016-01-01

    Results of disk diffusion antimicrobial susceptibility testing depend on individual visual reading of inhibition zone diameters. Therefore, automated reading using camera systems might represent a useful tool for standardization. In this study, the ADAGIO automated system (Bio-Rad) was evaluated for reading disk diffusion tests of fastidious bacteria. 144 clinical isolates (68 β-haemolytic streptococci, 28 Streptococcus pneumoniae, 18 viridans group streptococci, 13 Haemophilus influenzae, 7 Moraxella catarrhalis, and 10 Campylobacter jejuni) were tested on Mueller-Hinton agar supplemented with 5% defibrinated horse blood and 20 mg/L β-NAD (MH-F, Oxoid) according to EUCAST. Plates were read manually with a ruler and automatically using the ADAGIO system. Inhibition zone diameters, indicated by the automated system, were visually controlled and adjusted, if necessary. Among 1548 isolate-antibiotic combinations, comparison of automated vs. manual reading yielded categorical agreement (CA) without visual adjustment of the automatically determined zone diameters in 81.4%. In 20% (309 of 1548) of tests it was deemed necessary to adjust the automatically determined zone diameter after visual control. After adjustment, CA was 94.8%; very major errors (false susceptible interpretation), major errors (false resistant interpretation) and minor errors (false categorization involving intermediate result), calculated according to the ISO 20776-2 guideline, accounted to 13.7% (13 of 95 resistant results), 3.3% (47 of 1424 susceptible results) and 1.4% (21 of 1548 total results), respectively, compared to manual reading. The ADAGIO system allowed for automated reading of disk diffusion testing in fastidious bacteria and, after visual validation of the automated results, yielded good categorical agreement with manual reading. PMID:27391898

  19. Evaluation of an Automated System for Reading and Interpreting Disk Diffusion Antimicrobial Susceptibility Testing of Fastidious Bacteria

    PubMed Central

    Idelevich, Evgeny A.; Becker, Karsten; Schmitz, Janne; Knaack, Dennis; Peters, Georg; Köck, Robin

    2016-01-01

    Results of disk diffusion antimicrobial susceptibility testing depend on individual visual reading of inhibition zone diameters. Therefore, automated reading using camera systems might represent a useful tool for standardization. In this study, the ADAGIO automated system (Bio-Rad) was evaluated for reading disk diffusion tests of fastidious bacteria. 144 clinical isolates (68 β-haemolytic streptococci, 28 Streptococcus pneumoniae, 18 viridans group streptococci, 13 Haemophilus influenzae, 7 Moraxella catarrhalis, and 10 Campylobacter jejuni) were tested on Mueller-Hinton agar supplemented with 5% defibrinated horse blood and 20 mg/L β-NAD (MH-F, Oxoid) according to EUCAST. Plates were read manually with a ruler and automatically using the ADAGIO system. Inhibition zone diameters, indicated by the automated system, were visually controlled and adjusted, if necessary. Among 1548 isolate-antibiotic combinations, comparison of automated vs. manual reading yielded categorical agreement (CA) without visual adjustment of the automatically determined zone diameters in 81.4%. In 20% (309 of 1548) of tests it was deemed necessary to adjust the automatically determined zone diameter after visual control. After adjustment, CA was 94.8%; very major errors (false susceptible interpretation), major errors (false resistant interpretation) and minor errors (false categorization involving intermediate result), calculated according to the ISO 20776–2 guideline, accounted to 13.7% (13 of 95 resistant results), 3.3% (47 of 1424 susceptible results) and 1.4% (21 of 1548 total results), respectively, compared to manual reading. The ADAGIO system allowed for automated reading of disk diffusion testing in fastidious bacteria and, after visual validation of the automated results, yielded good categorical agreement with manual reading. PMID:27391898

  20. Flow and diffusion of high-stakes test scores

    PubMed Central

    Marder, M.; Bansal, D.

    2009-01-01

    We apply visualization and modeling methods for convective and diffusive flows to public school mathematics test scores from Texas. We obtain plots that show the most likely future and past scores of students, the effects of random processes such as guessing, and the rate at which students appear in and disappear from schools. We show that student outcomes depend strongly upon economic class, and identify the grade levels where flows of different groups diverge most strongly. Changing the effectiveness of instruction in one grade naturally leads to strongly nonlinear effects on student outcomes in subsequent grades. PMID:19805049

  1. Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis.

    PubMed

    Takeda, M; Zhang, M; Nakajima, H; Hiratsuka, T

    2008-04-28

    This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses. PMID:18353488

  2. Hyperspectral imaging for detecting pathogens grown on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung Chul; Lawrence, Kurt C.; Siragusa, Gregory R.; Line, John E.; Park, Bosoon; Windham, William R.

    2007-09-01

    This paper is concerned with the development of a hyperspectral imaging technique for detecting and identifying one of the most common foodborne pathogens, Campylobacter. Direct plating using agars is an effective tool for laboratory tests and analyses of microorganisms. The morphology (size, growth pattern, color, etc.) of colonies grown on agar plates has been widely used to tentatively differentiate organisms. However, it is sometimes difficult to differentiate target organisms like Campylobacters from other contaminants grown together on the same agar plates. A hyperspectral imaging system operating at the visible and near infrared (VNIR) spectral region from 400 nm to 900 nm was set up to measure spectral signatures of 17 different Campylobacter and non-Campylobacter subspecies. Protocols for culturing, imaging samples and for calibrating measured data were developed. The VNIR spectral library of all 17 organisms commonly encountered in poultry was established from calibrated hyperspectral images. A classification algorithm was developed to locate and identify Campylobacters, non-Campylobacter contaminants, and background agars with 99.29% accuracy. This research has a potential to be expanded to detect other pathogens grown on agar media.

  3. Adsorptive removal of methylene blue by agar: effects of NaCl and ethanol

    PubMed Central

    2012-01-01

    Adsorption of methylene blue (MB) on agar was investigated as a function of temperature (308-328 K), different concentrations of NaCl and HCl and various weight percentages of binary mixtures of ethanol with water. It was observed that the maximum experimental adsorption capacity, qm, exp, in water is up to 50 mg g-1 and decreases with increase in weight percentage of ethanol and NaCl and HCl concentration compared to that of water. Analysis of data using ARIAN model showed that MB adsorbs as monomer and dimer on the surface of agar. Binding constants of MB to agar were calculated using the Temkin isotherm. The process is exothermic in water and other solutions. The mean adsorption energy (E) value indicated binding of MB to agar is chemical adsorption. Kinetics of this interaction obeys from the pseudo-second-order model and diffusion of the MB molecules into the agar is the main rate-controlling step. PMID:22339759

  4. Hyperspectral Imaging for Detecting Pathogens Grown on Agar Plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper is concerned with the development of a hyperspectral imaging technique for detecting and identifying one of the most common foodborne pathogens, Campylobacter. Direct plating using agars is an effective tool for laboratory tests and analyses of microorganisms. The morphology (size, growth...

  5. Production of pseudorabies virus recombinant glycoprotein B and its use in an agar gel immunodiffusion (AGID) test for detection of antibodies with sensitivity and specificity equal to the virus neutralization assay.

    PubMed

    Serena, María Soledad; Geisler, Christoph; Metz, Germán Ernesto; Mórtola, Eduardo Carlos; Echeverría, María Gabriela

    2016-04-01

    Pseudorabies virus (PrV) causes Aujeszky's disease (AD), which affects mainly swine, but also cattle, sheep, and wild animals, resulting in substantial economic losses due to animal mortality and lost productivity worldwide. To combat PrV, eradication programs using PrV strains lacking the gene encoding glycoprotein E (gE) are ongoing in several countries. These eradication programs have generated a currently unmet demand for affordable, easy-to-use, and sensitive tests that can detect PrV infection in pigs infected with either wild-type virus or vaccine strain (gE-deleted) virus. To meet this demand, we used the baculovirus-insect cell system to produce recombinant glycoprotein B (gB) as antigen for an immune assay. The high GC-content (70% average) of the gB gene from the Argentinian PrV CL15 strain necessitated the use of betaine as a PCR enhancer to amplify the extracellular domain. Recombinant gB was expressed at high levels and reacted strongly with sera from PrV infected pigs. We used the recombinant gB to develop an agar gel immunodiffusion (AGID) test for detection of PrV antibodies. Compared to the gold standard virus neutralization (VN) assay, the AGID sensitivity and specificity were 95% and 96.6% respectively. Thus, recombinant gB produced in the baculovirus-insect cell system is a viable source of antigen for the detection of PrV antibodies in AGID tests. Considering its relatively lower cost, simplicity of use and result interpretation, our AGID is a valuable alternative tool to the VN assay. PMID:26800775

  6. Individual based simulations of bacterial growth on agar plates

    NASA Astrophysics Data System (ADS)

    Ginovart, M.; López, D.; Valls, J.; Silbert, M.

    2002-03-01

    The individual based simulator, INDividual DIScrete SIMulations (INDISIM) has been used to study the behaviour of the growth of bacterial colonies on a finite dish. The simulations reproduce the qualitative trends of pattern formation that appear during the growth of Bacillus subtilis on an agar plate under different initial conditions of nutrient peptone concentration, the amount of agar on the plate, and the temperature. The simulations are carried out by imposing closed boundary conditions on a square lattice divided into square spatial cells. The simulator studies the temporal evolution of the bacterial population possible by setting rules of behaviour for each bacterium, such as its uptake, metabolism and reproduction, as well as rules for the medium in which the bacterial cells grow, such as concentration of nutrient particles and their diffusion. The determining factors that characterize the structure of the bacterial colony patterns in the presents simulations, are the initial concentrations of nutrient particles, that mimic the amount of peptone in the experiments, and the set of values for the microscopic diffusion parameter related, in the experiments, to the amount of the agar medium.

  7. Defect characterisation based on heat diffusion using induction thermography testing

    NASA Astrophysics Data System (ADS)

    He, Yunze; Pan, Mengchun; Luo, Feilu

    2012-10-01

    Pulsed eddy current (PEC) thermography (a.k.a. induction thermography) has been successfully applied to detect defects (corrosion, cracks, impact, and delamination) in metal alloy and carbon fiber reinforced plastic. During these applications, the defect detection mechanism is mainly investigated based on the eddy current interaction with defect. In this paper, defect characterisation for wall thinning defect and inner defect in steel is investigated based on heat diffusion. The paper presents the PEC thermography testing, which integrates the reflection mode and transmission mode by means of configuring two cameras on both sides of sample. The defect characterisation methods under transmission mode and reflection mode are investigated and compared through 1D analytical analysis, 3D numerical studies, and experimental studies. The suitable detection mode for wall thinning and inner defects quantification is concluded.

  8. Ergodicity testing for anomalous diffusion: Small sample statistics

    NASA Astrophysics Data System (ADS)

    Janczura, Joanna; Weron, Aleksander

    2015-04-01

    The analysis of trajectories recorded in experiments often requires calculating time averages instead of ensemble averages. According to the Boltzmann hypothesis, they are equivalent only under the assumption of ergodicity. In this paper, we implement tools that allow to study ergodic properties. This analysis is conducted in two classes of anomalous diffusion processes: fractional Brownian motion and subordinated Ornstein-Uhlenbeck process. We show that only first of them is ergodic. We demonstrate this by applying rigorous statistical methods: mean square displacement, confidence intervals, and dynamical functional test. Our methodology is universal and can be implemented for analysis of many experimental data not only if a large sample is available but also when there are only few trajectories recorded.

  9. Ergodicity testing for anomalous diffusion: small sample statistics.

    PubMed

    Janczura, Joanna; Weron, Aleksander

    2015-04-14

    The analysis of trajectories recorded in experiments often requires calculating time averages instead of ensemble averages. According to the Boltzmann hypothesis, they are equivalent only under the assumption of ergodicity. In this paper, we implement tools that allow to study ergodic properties. This analysis is conducted in two classes of anomalous diffusion processes: fractional Brownian motion and subordinated Ornstein-Uhlenbeck process. We show that only first of them is ergodic. We demonstrate this by applying rigorous statistical methods: mean square displacement, confidence intervals, and dynamical functional test. Our methodology is universal and can be implemented for analysis of many experimental data not only if a large sample is available but also when there are only few trajectories recorded. PMID:25877558

  10. Defect characterisation based on heat diffusion using induction thermography testing.

    PubMed

    He, Yunze; Pan, Mengchun; Luo, Feilu

    2012-10-01

    Pulsed eddy current (PEC) thermography (a.k.a. induction thermography) has been successfully applied to detect defects (corrosion, cracks, impact, and delamination) in metal alloy and carbon fiber reinforced plastic. During these applications, the defect detection mechanism is mainly investigated based on the eddy current interaction with defect. In this paper, defect characterisation for wall thinning defect and inner defect in steel is investigated based on heat diffusion. The paper presents the PEC thermography testing, which integrates the reflection mode and transmission mode by means of configuring two cameras on both sides of sample. The defect characterisation methods under transmission mode and reflection mode are investigated and compared through 1D analytical analysis, 3D numerical studies, and experimental studies. The suitable detection mode for wall thinning and inner defects quantification is concluded. PMID:23126785

  11. Agar polysaccharides from Gracilaria species (Rhodophyta, Gracilariaceae).

    PubMed

    Marinho-Soriano, E

    2001-07-26

    Yield, physical and chemical properties of agar from three agarophytes species (Gracilaria gracilis, G. dura and G. bursa-pastoris) were determined. The agar yield from the three species varied significantly (P<0.01). The highest yields of agar (34.8%) and the lowest (30%) were obtained from G. bursa-pastoris and G. gracilis, respectively. Highest gel strength (630+/-15 g cm(-2)) was obtained from agar extracted from G. gracilis and lowest from G. bursa-pastoris (26+/-3.6 g cm(-2)). The values of 3,6-anhydrogalactose were similar for G. gracilis and G. dura and there were no significant differences among the species. The sulfate contents varied significantly (P<0.01) and the higher value was obtained from G. bursa-pastoris. Among the three species, G. gracilis showed superior agar quality than the other two species, hence it can be considered a good potential source for industrial use. PMID:11472802

  12. Modeling of the Bacillus subtilis Bacterial Biofilm Growing on an Agar Substrate.

    PubMed

    Wang, Xiaoling; Wang, Guoqing; Hao, Mudong

    2015-01-01

    Bacterial biofilms are organized communities composed of millions of microorganisms that accumulate on almost any kinds of surfaces. In this paper, a biofilm growth model on an agar substrate is developed based on mass conservation principles, Fick's first law, and Monod's kinetic reaction, by considering nutrient diffusion between biofilm and agar substrate. Our results show biofilm growth evolution characteristics such as biofilm thickness, active biomass, and nutrient concentration in the agar substrate. We quantitatively obtain biofilm growth dependence on different parameters. We provide an alternative mathematical method to describe other kinds of biofilm growth such as multiple bacterial species biofilm and also biofilm growth on various complex substrates. PMID:26355542

  13. Modeling of the Bacillus subtilis Bacterial Biofilm Growing on an Agar Substrate

    PubMed Central

    Wang, Xiaoling; Wang, Guoqing; Hao, Mudong

    2015-01-01

    Bacterial biofilms are organized communities composed of millions of microorganisms that accumulate on almost any kinds of surfaces. In this paper, a biofilm growth model on an agar substrate is developed based on mass conservation principles, Fick's first law, and Monod's kinetic reaction, by considering nutrient diffusion between biofilm and agar substrate. Our results show biofilm growth evolution characteristics such as biofilm thickness, active biomass, and nutrient concentration in the agar substrate. We quantitatively obtain biofilm growth dependence on different parameters. We provide an alternative mathematical method to describe other kinds of biofilm growth such as multiple bacterial species biofilm and also biofilm growth on various complex substrates. PMID:26355542

  14. An agar gel enzyme assay (AGEA) for simple detection of Salmonella enteritidis antibodies in chicken sera.

    PubMed

    Kim, C J; Nagaraja, K V

    1991-01-01

    An agar gel enzyme assay (AGEA) was developed for the detection of antibodies to Salmonella enteritidis (SE). The assay was based on the ability of antibodies to diffuse through an agar gel and react with antigen coated on a polystyrene surface. The antigen-antibody reaction was then made visible by applying an enzyme-conjugated anti-immunoglobulin and the addition, subsequently, of a substrate-containing gel. The color change in circular zones was taken as the indication for the presence of antibodies. The present investigation reports identification of an antigen specific for SE and its use in the development of a relatively simple AGEA procedure. The results of AGEA were compared with those of conventional microagglutination (MA) test and serum plate (SP) test. The percentage agreement between MA and AGEA in positive serum sample was found to be 94.4%, and in negative serum samples it was found to be 88.8%. The present results suggest that the AGEA could be a very useful screening test for the detection of SE antibodies because the assay is inexpensive, specific and simple to perform without much equipment, and give results within a 3-hr period. PMID:1832368

  15. Evaluation of the PREVI® Isola automated seeder system compared to reference manual inoculation for antibiotic susceptibility testing by the disk diffusion method.

    PubMed

    Le Page, S; van Belkum, A; Fulchiron, C; Huguet, R; Raoult, D; Rolain, J-M

    2015-09-01

    The disk diffusion (DD) method remains the most popular manual technique for antibiotic susceptibility testing (AST) in clinical microbiology laboratories. This is because of its simplicity, reproducibility, and limited cost compared to (automated) microdilution systems, which are usually less sensitive at detecting certain important mechanisms of resistance. Here, we evaluate the PREVI® Isola automated seeder system using a new protocol for spreading bacterial suspensions (eight deposits of calibrated inocula of bacteria, followed by two rounds of rotation) in comparison with manual DD reference testing on a large series of clinical and reference strains. The average time required for seeding one agar plate for DD with this new protocol was 51 s per plate, i.e., 70 agar plates/h. Reproducibility and repeatability was assessed on three reference and three randomly chosen clinical strains, as usually requested by the European Committee on Antimicrobial Susceptibility Testing (EUCAST), and was excellent compared to the manual method. The standard deviations of zones of growth inhibition showed no statistical discrimination. The correlation between the two methods, assessed using 294 clinical isolates and a panel of six antibiotics (n = 3,528 zones of growth inhibition measured), was excellent, with a correlation coefficient of 0.977. The new PREVI® Isola protocol adapted for DD had a sensitivity of 99 % and a specificity of 100 % compared to the manual technique for interpreting DD as recommended by the EUCAST. PMID:26092031

  16. Susceptibility testing of Danish isolates of Capnocytophaga and CDC group DF-2 bacteria.

    PubMed

    Bremmelgaard, A; Pers, C; Kristiansen, J E; Korner, B; Heltberg, O; Frederiksen, W

    1989-01-01

    Twelve Capnocytophaga and seven DF-2 strains were tested for their susceptibility to 14 antimicrobial agents using an agar dilution and an agar diffusion method. Twenty-three other antibiotics were evaluated using the diffusion test only. All strains were fully susceptible to penicillin, ampicillin, cefuroxime, cefotaxime, erythromycin, clindamycin, chloramphenicol, doxycycline, rifamycin and ofloxacin using both methods. Clindamycin, rifamycin and cefotaxime were most active. Using agar dilution some strains were susceptible to gentamicin, but agar diffusion showed total resistance. One Capnocytophaga strain was susceptible and another moderately susceptible to metronidazole, other strains were resistant. The agar diffusion test showed that both Capnocytophaga and DF-2 were resistant to most other aminoglycosides, to fosfomycin, polymyxin and trimethoprim. All strains of both taxa were fully susceptible to piperacillin, cefoxitin, imipenem and fusidic acid and showed different susceptibilities to the other agents. Susceptibility testing by means of agar diffusion using an enriched chocolate agar and 5% CO2 atmosphere could be used to test Capnocytophaga and DF-2 strains and gives sufficient accuracy for routine use, when revised inhibition zone breakpoints are employed. PMID:2914105

  17. Residual Agar Determination in Bacterial Spores by Electrospray Ionization Mass Spectrometry

    SciTech Connect

    Wahl, Karen L.; Colburn, Heather A.; Wunschel, David S.; Petersen, Catherine E.; Jarman, Kristin H.; Valentine, Nancy B.

    2010-02-15

    Presented here is an analytical method to detect residual agar from a bacterial spore sample as an indication of culturing on an agar plate. This method is based on the resolubilization of agar polysaccharide from a bacterial spore sample, enzymatic digestion, followed by electrospray ionization tandem mass spectrometry (ESI-MSn) analysis for detection of a specific agar fragment ion. A range of Bacillus species and strains were selected to demonstrate the effectiveness of this approach. The characteristic agar fragment ion was detected in the spores grown on agar that were washed from 1 to 5 times, irradiated or non-irradiated and not in the spores grown in broth. A sample containing approximately 108 spores is currently needed for confident detection of residual agar from culture on agar plates in the presence of bacterial spores with a limit of detection of approximately 1 ppm agar spiked into a broth-grown spore sample. The results of a proficiency test with 42 blinded samples are presented demonstrating the utility of this method with no false positives and only 3 false negatives for samples that were below the detection level of the method as documented.

  18. Some Experiments With Agar-Grown Seedlings

    ERIC Educational Resources Information Center

    Freeland, P. W.

    1973-01-01

    Two percent agar gel is reported as a better medium for germination and growth studies. Students can be encouraged to undertake many simple experiments and make precise observations by using this medium. (PS)

  19. Evaluation of the Double Agar Gel Immunodiffusion Test and of the Enzyme-Linked Immunosorbent Assay in the Diagnosis and Follow-Up of Patients with Chronic Pulmonary Aspergillosis

    PubMed Central

    de Azevedo, Priscila Zacarias; Sylvestre, Tatiane Fernanda; Cavalcante, Ricardo de Souza; de Carvalho, Lídia Raquel; Moris, Daniela Vanessa; de Oliveira, Maria Luiza Cotrim Sartor; Mendes, Rinaldo Poncio

    2015-01-01

    The diagnosis of chronic pulmonary aspergillosis (CPA) depends on the radiologic image and the identification of specific antibodies. The present study aimed to evaluate accuracy parameters of enzyme-linked immunosorbent assay (ELISA) and of the determination of serum galactomannan level in the diagnosis of patients with CPA, comparing these results with the double agar gel immunodiffusion (DID) test. In addition, the prevalence of cross-reactivity and the serological progression after treatment were evaluated by comparing DID and ELISA. Six study groups were formed: G1: 22 patients with CPA, 17 of whom had Aspergillus fungus ball, one chronic cavitary pulmonary aspergillosis (CCPA) and four chronic fibrosing pulmonary aspergillosis (CFPA); G2: 28 patients with pulmonary tuberculosis (TB); G3: 23 patients with histoplasmosis (HST); G4: 50 patients with paracoccidioidomycosis (PCM); G5: 20 patients with cryptococcosis (CRC); and G6: 200 healthy controls. Serum antibodies were measured by DID and ELISA, with two antigen preparations—Aspergillus fumigatus (DID1, ELISA1) and a pool of A. fumigatus, A. flavus and A. niger antigens (DID2, ELISA2). The Platélia Aspergillus Enzyme Immunoassay (EIA) kit was used to measure galactomannan. The cut-off points of ELISA were determined for each antigen preparation and for the 95% and 99% confidence intervals. Despite the low sensitivity, DID was the technique of choice due to its specificity, positive and negative predictive values and positive likelihood ratio–especially with the antigen pool and due to the low frequency of cross-reactivity. ELISA1 and a 0.090 cut-off showed high sensitivity, specificity and negative predictive value, but a high frequency of cross-reactivity with CRC. The best degree of agreement was observed between ELISA1 and ELISA2. The detection of serum galactomannan showed high sensitivity, comparable to ELISA2. The immunodiffusion test showed an excellent relationship with the progression after

  20. Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Latona, Nicholas; Liu, Cheng-Kung; Gonçalves, Maria P; Liu, LinShu

    2014-10-13

    In the present paper, we test the suitability of ChCl/urea (DES-U) and ChCl/glycerol (DES-G) eutectic mixtures, each one prepared at 1:2 molar ratio, for the production of agar films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and subsequent drying. The mechanical properties, water resistance and microstructure of the films were evaluated at different polymer concentrations (i.e. 2-6%, w/w). DES-U showed by far, the best film forming ability. Agreeing with the diffusion and SEM data, films with the best mechanical properties were found at the lowest and highest agar concentrations (tensile strengths of 24.2-42 MPa and elongations of 15.4-38.9%). The water sorption and contact angle studies suggested increased hydrophilicity for the film containing the lowest concentration of agar. The use of choline chloride based ionic liquid analogues as solvent and plasticizer might be a promising tool for the development of new non-aqueous materials based on seaweed polysaccharides. PMID:25037344

  1. Rifaximin disc diffusion test for in vitro susceptibility testing of Clostridium difficile

    PubMed Central

    Huhulescu, Steliana; Sagel, Ulrich; Fiedler, Anita; Pecavar, Verena; Blaschitz, Marion; Wewalka, Guenther; Allerberger, Franz

    2011-01-01

    Rifaximin is a rifampicin derivative, poorly absorbed by the gastro-intestinal tract. We studied the in vitro susceptibility to rifamixin of 1082 Clostridium difficile isolates; among these,184 isolates from a strain collection were tested by an in-house rifaximin disc (40 µg) diffusion test, by an in-house rifaximin broth microdilution test, by rifampicin Etest and by rpoB gene sequencing. In the absence of respective CLSI or EUCAST MIC breakpoints for rifaximin and rifampicin against C. difficile we chose MIC ≥32 µg ml−1 as criterion for reduced in vitro susceptibility. To further validate the disc diffusion test 898 consecutive clinical isolates were analysed using the disc diffusion test, the Etest and rpoB gene sequence analysis for all resistant strains. Rifaximin broth microdilution tests of the 184 reference strains yielded rifaximin MICs ranging from 0.001 (n = 1) to ≥1024 µg ml−1 (n = 61); 62 isolates showed a reduced susceptibility (MIC ≥32 µg ml−1). All of these 62 strains showed rpoB gene mutations producing amino acid substitutions; the rifampicin- and rifaximin-susceptible strains showed either a wild-type sequence or silent amino acid substitutions (19 strains). For 11 arbitrarily chosen isolates with rifaximin MICs of >1024 µg ml−1, rifaximin end-point MICs were determined by broth dilution: 4096 µg ml−1 (n = 2), 8192 µg ml−1 (n = 6), 16 384 µg ml−1 (n = 2) and 32 678 µg ml−1 (n = 1). Rifampicin Etests on the 184 C. difficile reference strains yielded MICs ranging from ≤0.002 (n = 117) to ≥32 µg ml−1 (n = 59). Using a 38 mm inhibition zone as breakpoint for reduced susceptibility the use of rifaximin disc diffusion yielded 59 results correlating with those obtained by use of rifaximin broth microdilution in 98.4 % of the 184 strains tested. Rifampicin Etests performed on the 898 clinical isolates revealed that 67 isolates had MICs of ≥32 µg ml−1. There were no

  2. Rifaximin disc diffusion test for in vitro susceptibility testing of Clostridium difficile.

    PubMed

    Huhulescu, Steliana; Sagel, Ulrich; Fiedler, Anita; Pecavar, Verena; Blaschitz, Marion; Wewalka, Guenther; Allerberger, Franz; Indra, Alexander

    2011-08-01

    Rifaximin is a rifampicin derivative, poorly absorbed by the gastro-intestinal tract. We studied the in vitro susceptibility to rifamixin of 1082 Clostridium difficile isolates; among these, 184 isolates from a strain collection were tested by an in-house rifaximin disc (40 µg) diffusion test, by an in-house rifaximin broth microdilution test, by rifampicin Etest and by rpoB gene sequencing. In the absence of respective CLSI or EUCAST MIC breakpoints for rifaximin and rifampicin against C. difficile we chose MIC ≥32 µg ml(-1) as criterion for reduced in vitro susceptibility. To further validate the disc diffusion test 898 consecutive clinical isolates were analysed using the disc diffusion test, the Etest and rpoB gene sequence analysis for all resistant strains. Rifaximin broth microdilution tests of the 184 reference strains yielded rifaximin MICs ranging from 0.001 (n = 1) to ≥1024 µg ml(-1) (n = 61); 62 isolates showed a reduced susceptibility (MIC ≥32 µg ml(-1)). All of these 62 strains showed rpoB gene mutations producing amino acid substitutions; the rifampicin- and rifaximin-susceptible strains showed either a wild-type sequence or silent amino acid substitutions (19 strains). For 11 arbitrarily chosen isolates with rifaximin MICs of >1024 µg ml(-1), rifaximin end-point MICs were determined by broth dilution: 4096 µg ml(-1) (n = 2), 8192 µg ml(-1) (n = 6), 16,384 µg ml(-1) (n = 2) and 32,678 µg ml(-1) (n = 1). Rifampicin Etests on the 184 C. difficile reference strains yielded MICs ranging from ≤0.002 (n = 117) to ≥32 µg ml(-1) (n = 59). Using a 38 mm inhibition zone as breakpoint for reduced susceptibility the use of rifaximin disc diffusion yielded 59 results correlating with those obtained by use of rifaximin broth microdilution in 98.4 % of the 184 strains tested. Rifampicin Etests performed on the 898 clinical isolates revealed that 67 isolates had MICs of ≥32 µg ml(-1). There were no discordant

  3. Factors Affecting Selectivity of Brilliant Green-Phenol Red Agar for Salmonellae

    PubMed Central

    Moats, W. A.; Kinner, J. A.

    1974-01-01

    Commercial brilliant green (BG)-sulfa agar was found to be nonselective toward a test series of Enterobacteriaceae. Various formulations of BG were prepared by using Trypticase soy agar (BBL) as a base. Results were more reproducible when BG dye was added after sterilization than before. Sulfonamides improved selectivity as compared with brilliant green alone. Sulfanilamide (SN) was slightly more selective for salmonellae than other sulfonamides tested. Bile salts and sodium dodecyl sulfate markedly reduced the toxicity of BG to all the test bacteria. Enterobacter strains were most difficult to inhibit. A combination of 5 mg of BG and 1 g of SN/liter prevented growth of Proteus mirabilis and Escherichia coli and retarded growth of Enterobacter strains. The BG-SN agars were superior in selectivity to a series of commercial agars tested, and numbers of salmonellae recovered on BG-SN agar and Trypticase soy agar (BBL) were the same. Brilliant green agars with various degrees of selectivity are described. PMID:4589120

  4. Standardization of Operator-Dependent Variables Affecting Precision and Accuracy of the Disk Diffusion Method for Antibiotic Susceptibility Testing.

    PubMed

    Hombach, Michael; Maurer, Florian P; Pfiffner, Tamara; Böttger, Erik C; Furrer, Reinhard

    2015-12-01

    Parameters like zone reading, inoculum density, and plate streaking influence the precision and accuracy of disk diffusion antibiotic susceptibility testing (AST). While improved reading precision has been demonstrated using automated imaging systems, standardization of the inoculum and of plate streaking have not been systematically investigated yet. This study analyzed whether photometrically controlled inoculum preparation and/or automated inoculation could further improve the standardization of disk diffusion. Suspensions of Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 29213 of 0.5 McFarland standard were prepared by 10 operators using both visual comparison to turbidity standards and a Densichek photometer (bioMérieux), and the resulting CFU counts were determined. Furthermore, eight experienced operators each inoculated 10 Mueller-Hinton agar plates using a single 0.5 McFarland standard bacterial suspension of E. coli ATCC 25922 using regular cotton swabs, dry flocked swabs (Copan, Brescia, Italy), or an automated streaking device (BD-Kiestra, Drachten, Netherlands). The mean CFU counts obtained from 0.5 McFarland standard E. coli ATCC 25922 suspensions were significantly different for suspensions prepared by eye and by Densichek (P < 0.001). Preparation by eye resulted in counts that were closer to the CLSI/EUCAST target of 10(8) CFU/ml than those resulting from Densichek preparation. No significant differences in the standard deviations of the CFU counts were observed. The interoperator differences in standard deviations when dry flocked swabs were used decreased significantly compared to the differences when regular cotton swabs were used, whereas the mean of the standard deviations of all operators together was not significantly altered. In contrast, automated streaking significantly reduced both interoperator differences, i.e., the individual standard deviations, compared to the standard deviations for the manual method, and the mean of

  5. Demonstrating Diffusion

    ERIC Educational Resources Information Center

    Foy, Barry G.

    1977-01-01

    Two demonstrations are described. Materials and instructions for demonstrating movement of molecules into cytoplasm using agar blocks, phenolphthalein, and sodium hydroxide are given. A simple method for demonstrating that the rate of diffusion of a gas is inversely proportional to its molecular weight is also presented. (AJ)

  6. Full scale evaluation of diffuser ageing with clean water oxygen transfer tests.

    PubMed

    Krampe, J

    2011-01-01

    Aeration is a crucial part of the biological wastewater treatment in activated sludge systems and the main energy user of WWTPs. Approximately 50 to 60% of the total energy consumption of a WWTP can be attributed to the aeration system. The performance of the aeration system, and in the case of fine bubble diffused aeration the diffuser performance, has a significant impact on the overall plant efficiency. This paper seeks to isolate the changes of the diffuser performance over time by eliminating all other influencing parameters like sludge retention time, surfactants and reactor layout. To achieve this, different diffusers have been installed and tested in parallel treatment trains in two WWTPs. The diffusers have been performance tested in clean water tests under new conditions and after one year of operation. A set of material property tests describing the diffuser membrane quality was also performed. The results showed a significant drop in the performance of the EPDM diffuser in the first year which resulted in similar oxygen transfer efficiency around 16 g/m3/m for all tested systems. Even though the tested silicone diffusers did not show a drop in performance they had a low efficiency in the initial tests. The material properties indicate that the EPDM performance loss is partly due to the washout of additives. PMID:22097050

  7. Pigments of fly agaric (Amanita muscaria).

    PubMed

    Stintzing, Florian; Schliemann, Willibald

    2007-01-01

    The complex pigment pattern of fly agaric (Amanita muscaria) cap skins has been studied by LC-DAD and mass spectrometry. Among the betaxanthins the corresponding derivatives of serine, threonine, ethanolamine, alanine, Dopa, phenylalanine and tryptophan are reported for the first time to contribute to the pigment pattern of fly agarics. Betalamic acid, the chromophoric precursor of betaxanthins and betacyanins, muscaflavin and seco-dopas were also detected. Furthermore, the red-purple muscapurpurin and the red muscarubrin were tentatively assigned while further six betacyanin-like components could not be structurally allocated. Stability studies indicated a high susceptibility of pigment extracts to degradation which led to rapid colour loss thus rendering a complete characterization of betacyanin-like compounds impossible at present. Taking into account these difficulties the presented results may be a starting point for a comprehensive characterization of the pigment composition of fly agarics. PMID:18274277

  8. Standard operating procedure to prepare agar phantoms

    NASA Astrophysics Data System (ADS)

    Souza, R. M.; Santos, T. Q.; Oliveira, D. P.; Souza, R. M.; Alvarenga, A. V.; Costa-Felix, R. P. B.

    2016-07-01

    Agar phantoms are widely used as soft tissue mimics and some preparation techniques are described in the literature. There are also standards that describe the recipe of a soft tissue mimicking material (TMM). However some details of manufacture process are not clearly defined. The standardization of the phantom's preparation can produce a metrological impact on the results of the acoustic properties measured. In this direction, this paper presents a standard operating procedure (SOP) to prepare the agar TMM described on the IEC 60601-237.

  9. Use of agar agar stabilized milled zero-valent iron particles for in situ groundwater remediation

    NASA Astrophysics Data System (ADS)

    Schmid, Doris; Velimirović, Milica; Wagner, Stephan; Micić Batka, Vesna; von der Kammer, Frank; Hofmann, Thilo

    2015-04-01

    A major obstacle for use of nanoscale zero-valent iron (nZVI) particles as a nontoxic material for effective in situ degradation of chlorinated aliphatic hydrocarbons (CAHs) is the high production cost. For that reason, submicro-scale milled zero-valent iron particles were recently developed (milled ZVI, UVR-FIA, Germany) by grinding macroscopic raw materials of elementary iron as a cheaper alternative to products produced by solid-state reduction. However, milled ZVI particles tend to aggregate and due to the rather large particle size (d50= 11.9 µm) also rapidly sediment. To prevent aggregation and consequently sedimentation of milled ZVI particles and therefore improve the mobility after in situ application, the use of a stabilizer is considered in literature as a most promising option. In this study, milled ZVI particles (1 g L-1 of particle concentration) were stabilized by environmentally friendly polymer agar agar (>0.5 g L-1), which had a positive impact on the milled ZVI stability. Sedimentation rate was significantly decreased by increasing the suspension viscosity. Column transport experiments were performed for bare and agar agar stabilized milled ZVI particles in commercially available fine grained quartz sand (DORSILIT® Nr.8, Gebrüder Dorfner GmbH Co, Germany) and different porous media collected from brownfields. The experiments were carried out under field relevant injection conditions of 100 m d-1. The maximal travel distance (LT) of less than 10 cm was determined for non-stabilized suspension in fine grained quartz sand, while agar agar (1 g L-1) stabilized milled ZVI suspension revealed LT of 12 m. Similar results were observed for porous media from brownfields showing that mobility of agar agar stabilized particle suspensions was significantly improved compared to bare particles. Based on the mobility data, agar agar stabilized milled zero-valent iron particles could be used for in situ application. Finally, lab-scale batch degradation

  10. Hybridization and invasion: an experimental test with diffuse knapweed (Centaurea diffusa Lam.)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A number of studies have suggested a causative link between hybridization and invasion. In this study, we experimentally test for such a link through a greenhouse common garden study with artificially created Backcross 1 (BC1) diffuse knapweed hybrids. In comparison with diffuse knapweed plants of n...

  11. Comparative study of methods used to estimate ionic diffusion coefficients using migration tests

    SciTech Connect

    Narsilio, G.A. Li, R. Pivonka, P. Smith, D.W.

    2007-08-15

    Ionic diffusion coefficients are estimated rapidly using electromigration tests. In this paper, electromigration tests are accurately simulated by numerically solving the Nernst-Planck (NP) equation (coupled with the electroneutrality condition (EN)) using the finite element method. Numerical simulations are validated against experimental data obtained elsewhere [E. Samson, J. Marchand, K.A. Snyder, Calculation of ionic diffusion coefficients on the basis of migration test results, Materials and Structures/Materiaux et Constructions 36 (257) (2003) 156-165., H. Friedmann, O. Amiri, A. Ait-Mokhtar, A direct method for determining chloride diffusion coefficient by using migration test, Cement and Concrete Research 34 (11) (2004) 1967-1973.]. It is shown that migration due to the non-linear electric potential completely overwhelms diffusion due to concentration gradients. The effects of different applied voltage differences and chloride source concentrations on estimations of chloride diffusion coefficients are explored. We show that the pore fluid within concrete and mortar specimens generally differs from the curing solution, lowering the apparent diffusion coefficient, primarily due to interactions of chloride ions with other ions in the pore fluid. We show that the variation of source chloride concentration strongly affects the estimation of diffusion coefficients in non-steady-state tests; however this effect vanishes under steady-state conditions. Most importantly, a comparison of diffusion coefficients obtained from sophisticated analyses (i.e., NP-EN) and a variety of commonly used simplifying methods to estimate chloride diffusion coefficients allows us to identify those methods and experimental conditions where both approaches deliver good estimates for chloride diffusion coefficients. Finally, we demonstrate why simultaneous use and monitoring of current density and fluxes are recommended for both the non-steady and steady-state migration tests.

  12. Glucose-sucrose-potassium tellurite-bacitracin agar, an alternative to mitis salivarius-bacitracin agar for enumeration of Streptococcus mutans.

    PubMed Central

    Tanzer, J M; Börjesson, A C; Laskowski, L; Kurasz, A B; Testa, M

    1984-01-01

    An agar medium for selective recovery and enumeration of Streptococcus mutans was developed as an alternative to mitis salivarius-bacitracin (MSB) agar. Combinations of dyes, antibiotics, and tellurite were added to a nonselective medium which, because of its sucrose content, allowed easy recognition of S. mutans colonies. Candle jar incubation for 2 days, by comparison with anaerobic incubation, reduced background flora but did not diminish S. mutans recoveries from clinical samples. Quantitative comparisons were made of the simultaneous recoveries of a number of authentic S. mutans serotype representatives and fresh clinical isolates, using various glucose-sucrose-potassium tellurite-bacitracin (GSTB) formulations and mitis salivarius, MSB, and blood agars. Mitis salivarius counts were not detectably different from blood counts, but counts on MSB were distinctly lower. A formulation of the new medium containing 5% glucose 5% sucrose, 0.001% potassium tellurite, 0.3 U of bacitracin per ml (hence GSTB), and 2% agar gave recoveries nearly equal to those on mitis salivarius agar and much greater than those on MSB. The medium yielded readily recognized S. mutans colonies and facilitated detection of intracellular polysaccharide formers upon flooding with I2 reagent. Freshly isolated serotype c, E, and f colonies could often be distinguished from serotype d and g colonies, a distinction made reliable by testing for intracellular polysaccharide. A study of 300 salivary samples revealed GSTB to give significantly higher recoveries than MSB. About 72% of all samples were substantially underestimated for S. mutans with MSB, and 6.7% of samples were falsely negative for S. mutans with MSB. Recovery of background flora on GSTB was as low or lower than on MSB, and both types of agar could be stored for at least 9 weeks without notable change of selectivity. Thus, GSTB agar appears to be simple and reliable to use and requires no anaerobic incubation. Caution is voiced about

  13. Reliability of Disk Diffusion Test Results for the Antimicrobial Susceptibility Testing of Nosocomial Gram-positive Microorganisms: Is E-test Method Better?

    PubMed Central

    Khalili, Hossein; Soltani, Rasool; Negahban, Sorrosh; Abdollahi, Alireza; Gholami, Keirollah

    2012-01-01

    Disk diffusion test is the usual applicable method for assessing the antimicrobial susceptibility pattern in most institutions and hospitals. The aim of this study was to determine the reliability of resistant-reported results of disk diffusion test for 6 routinely used antibiotics against Gram-positive microorganisms of nosocomial origin, using E-test method. Over a 1-year period, clinical specimens (e.g. blood, tracheal secretions, wound secretions, urine, etc.) were obtained from hospitalized patients with defined nosocomial infection and were cultured. Isolated Gram-positive bacteria underwent disk diffusion test for cephalothin, oxacillin, clindamycin, ciprofloxacin, vancomycin, teicoplanin (only for Enterococci), and meropenem antibiotics. E-test method was performed for all isolates resistant or intermediately sensitive to the disks of any mentioned antibiotics. Data showed compatible results of disk diffusion test with the results of E-test method for cephalothin, oxacillin, ciprofloxacin, vancomycin, and teicoplanin. None of ciprofloxacin- and vancomycin-resistant isolates in disk diffusion test showed sensitivity in E-test method. Significant differences between the results of disk diffusion and E-test methods were observed for clindamycin and meropenem against S.aureus (p = 0.01 and 0.04, respectively) and Enterococcus spp (p = 0.03 and 0.02, respectively). In order to increase the reliability of antimicrobial susceptibility results, it is recommended to perform E-test for nosocomial Gram-positive microorganisms that show antibiotic resistance by disk diffusion test and it is more important for clindamycin and meropenem. PMID:24250479

  14. Evaluation of use of a new chromogenic agar in detection of urinary tract pathogens.

    PubMed

    Samra, Z; Heifetz, M; Talmor, J; Bain, E; Bahar, J

    1998-04-01

    CHROMagar Orientation, a new chromogenic medium, was evaluated for the detection and differentiation of gram-positive and gram-negative pathogenic microorganisms in 900 urine samples from hospitalized patients. Performance characteristics of the medium were evaluated in comparison to those of 5% sheep blood and MacConkey agars by direct inoculation of the urine samples on the three media. Four gram-negative and two gram-positive strains as well as one yeast control strain from the American Type Culture Collection were used to ensure quality control. CHROMagar Orientation succeeded in detecting all the urine pathogens that were detected by the reference media, including gram-negative bacilli, staphylococci, streptococci, and yeasts. Colony color and morphology on CHROMagar Orientation accurately differentiated Escherichia coli, Proteus mirabilis, Proteus vulgaris, Pseudomonas aeruginosa, and Acinetobacter spp. Owing to the similarity in the pigmentation produced by Klebsiella, Enterobacter, and Citrobacter isolates, the medium failed to distinguish among them; however, these isolates were easily recognized as coliforms because of their metallic blue coloration. Staphylococci were clearly perceptible: S. aureus and S. epidermidis grow in regular-size colonies that range from opaque white to yellowish, and S. saprophyticus produces opaque pink colonies. All streptococcus strains, including those from groups B and C, were detected. They grow as undifferentiated flat dry diffused colonies, and additional tests were required for identification. Enterococci were easily discriminated by their strong turquoise pigmentation and their typical growth on the agar's surface. Yeast grow in typical creamy wet convex colonies. The accuracy of antibiotic susceptibility determinations according to standard methods was also tested by picking isolates directly from CHROMagar Orientation. The results showed excellent correlation with those obtained with microorganisms picked from

  15. Measurement of nitrogen dioxide diffusive sampling rates for Palmes diffusion tubes using a controlled atmosphere test facility (CATFAC)

    NASA Astrophysics Data System (ADS)

    Martin, Nicholas A.; Helmore, Jonathan J.; White, Samual; Barker Snook, Ieuan L.; Parish, Andy; Gates, Linda S.

    2014-09-01

    We report measurements of the 28 day NO2 diffusive sampling rates for seven designs of Palmes diffusion tubes (PDTs), which were exposed in a controlled atmosphere test facility (CATFAC) containing traceable concentrations of nitrogen dioxide, nitric oxide and water vapour under defined conditions of temperature (20 °C) and wind speed. One of the aims of the work was to implement low cost modifications to the conventional open tube PDT design, using either meshes or filters. This would potentially reduce some of the undesirable bias effects due to wind, which may lead to an over estimation of the NO2 concentration. Exposure tests in the CATFAC were carried out over a wide concentration range applicable to ambient monitoring, and also over a range of wind speeds at a constant concentration. For a given PDT design, the measured NO2 diffusive sampling rates were found to be effectively constant over the conditions tested. These rates were then applied to NO2 field measurements carried out at a monitoring station in central London, and three of the modified PDT designs were found to deliver improved repeatability and consequently reduced measurement uncertainty over the conventional open tubes.

  16. Diffusion of Molecular Diagnostic Lung Cancer Tests: A Survey of German Oncologists

    PubMed Central

    Steffen, Julius Alexander

    2014-01-01

    This study was aimed at examining the diffusion of diagnostic lung cancer tests in Germany. It was motivated by the high potential of detecting and targeting oncogenic drivers. Recognizing that the diffusion of diagnostic tests is a conditio sine qua non for the success of personalized lung cancer therapies, this study analyzed the diffusion of epidermal growth factor receptor (EGFR) and anaplastic lymphoma kinase (ALK) tests in Germany. Qualitative and quantitative research strategies were combined in a mixed-method design. A literature review and subsequent Key Opinion Leader interviews identified a set of qualitative factors driving the diffusion process, which were then translated into an online survey. The survey was conducted among a sample of 961 oncologists (11.34% response rate). The responses were analyzed in a multiple linear regression which identified six statistically significant factors driving the diffusion of molecular diagnostic lung cancer tests: reimbursement, attitude towards R&D, information self-assessment, perceived attitudes of colleagues, age and test-pathway strategies. Besides the important role of adequate reimbursement and relevant guidelines, the results of this study suggest that an increasing usage of test-pathway strategies, especially in an office-based setting, can increase the diffusion of molecular diagnostic lung cancer tests in the future. PMID:25562146

  17. A multigroup radiation diffusion test problem: Comparison of code results with analytic solution

    SciTech Connect

    Shestakov, A I; Harte, J A; Bolstad, J H; Offner, S R

    2006-12-21

    We consider a 1D, slab-symmetric test problem for the multigroup radiation diffusion and matter energy balance equations. The test simulates diffusion of energy from a hot central region. Opacities vary with the cube of the frequency and radiation emission is given by a Wien spectrum. We compare results from two LLNL codes, Raptor and Lasnex, with tabular data that define the analytic solution.

  18. Is a New Standard Needed for Diffusion Methods for In Vitro Susceptibility Testing of Fosfomycin against Pseudomonas aeruginosa?

    PubMed Central

    Díez-Aguilar, María; Martínez-García, Laura; Morosini, María Isabel

    2015-01-01

    We analyzed fosfomycin susceptibility results in Pseudomonas aeruginosa clinical isolates obtained by MIC gradient strips and disk diffusion methods using two different inocula, 108 and 106 CFU/ml, and compared them to the agar dilution reference method. Essential and categorical agreements were 93.6% and 95%, respectively, for the 106 CFU/ml alternative inoculum, and they were 67.6% and 78.2%, respectively, for the standard inoculum (108 CFU/ml). The use of the 106 CFU/ml inoculum improves the agreement values and inhibition zone readings. PMID:26643341

  19. Luminescent DNA- and agar-based membranes.

    PubMed

    Leones, R; Fernandes, M; Ferreira, R A S; Cesarino, I; Lima, J F; Carlos, L D; Bermudez, V de Zea; Magon, C J; Donoso, J P; Silva, M M; Pawlicka, A

    2014-09-01

    Luminescent materials containing europium ions are investigated for different optical applications. They can be obtained using bio-macromolecules, which are promising alternatives to synthetic polymers based on the decreasing oil resources. This paper describes studies of the DNA- and Agar-europium triflate luminescent membranes and its potential technological applications are expanded to electroluminescent devices. Polarized optical microscopy demonstrated that the samples are birefringent with submicrometer anisotropy. The X-ray diffraction analysis revealed predominantly amorphous nature of the samples and the atomic force microscopy images showed a roughness of the membranes of 409.0 and 136.1 nm for the samples of DNA10Eu and Agar1.11Eu, respectively. The electron paramagnetic resonance spectra of the DNA(n)Eu membranes with the principal lines at g ≈ 2.0 and g ≈ 4.8 confirmed uniform distribution of rare earth ions in a disordered matrix. Moreover, these strong and narrow resonance lines for the samples of DNA(n)Eu when compared to the Agar(n)Eu suggested a presence of paramagnetic radicals arising from the DNA matrix. The emission spectra suggested that the Eu3+ ions occupy a single local environment in both matrices and the excitation spectra monitored around the Eu emission lines pointed out that the Eu3+ ions in the Agar host were mainly excited via the broad band component rather than by direct intra-4f(6) excitation, whereas the opposite case occurred for the DNA-based sample. PMID:25924317

  20. Tests of Diffusion-Free Scaling Behaviors in Numerical Dynamo Data Sets

    NASA Astrophysics Data System (ADS)

    Cheng, J. S.; Aurnou, J. M.

    2015-12-01

    In order to describe the fluid physics of the dynamo generating regions of planets, the geoscience community has largely adopted a set of scaling laws proposed in the seminal work of Christensen and Aubert (2006).[1] These scalings make use of specially-constructed parameters that are independent of fluid diffusivities, anticipating that large-scale turbulent processes will dominate the physics in planetary dynamo settings. In the work presented here, we test the validity of diffusion-free heat transfer scaling laws by constructing synthetic heat transfer datasets and examining their scaling properties alongside those proposed by Christensen and Aubert (2006). These tests demonstrate that the seemingly robust collapse of heat transfer data using diffusion-free parameters is not indicative of fully turbulent, diffusion-free physics, but is instead an a priori consequence of the way such parameters are constructed. In particular, the diffusion-free heat transfer scaling is determined by the onset of convection, which is itself determined by the viscous diffusivity of the fluid. Our results, in conjunction with those of Stelzer and Jackson (2013),[2] show that diffusion-free scalings are not validated by current-day numerical dynamo datasets, and that it still remains to be established under what conditions dynamo generation becomes free of fluid diffusivities.References [1] Christensen, U.R., Aubert, J., 2006. Geophys. J. Int. 166, 97-114.[2] Stelzer, Z., Jackson, A., 2013. Geophys. J. Int. ggt083.

  1. Anomalous diffusion: Testing ergodicity breaking in experimental data

    NASA Astrophysics Data System (ADS)

    Magdziarz, Marcin; Weron, Aleksander

    2011-11-01

    Recent advances in single-molecule experiments show that various complex systems display nonergodic behavior. In this paper, we show how to test ergodicity and ergodicity breaking in experimental data. Exploiting the so-called dynamical functional, we introduce a simple test which allows us to verify ergodic properties of a real-life process. The test can be applied to a large family of stationary infinitely divisible processes. We check the performance of the test for various simulated processes and apply it to experimental data describing the motion of mRNA molecules inside live Escherichia coli cells. We show that the data satisfy necessary conditions for mixing and ergodicity. The detailed analysis is presented in the supplementary material.

  2. Anomalous diffusion: testing ergodicity breaking in experimental data.

    PubMed

    Magdziarz, Marcin; Weron, Aleksander

    2011-11-01

    Recent advances in single-molecule experiments show that various complex systems display nonergodic behavior. In this paper, we show how to test ergodicity and ergodicity breaking in experimental data. Exploiting the so-called dynamical functional, we introduce a simple test which allows us to verify ergodic properties of a real-life process. The test can be applied to a large family of stationary infinitely divisible processes. We check the performance of the test for various simulated processes and apply it to experimental data describing the motion of mRNA molecules inside live Escherichia coli cells. We show that the data satisfy necessary conditions for mixing and ergodicity. The detailed analysis is presented in the supplementary material. PMID:22181399

  3. Macromolecular coal structure as revealed by novel diffusion tests

    SciTech Connect

    Peppas, N.A.; Olivares, J.; Drummond, R.; Lustig, S.

    1990-01-01

    The main goal of the present work was the elucidation of the mechanistic characteristics of dynamic transport of various penetrants (solvents) in thin sections of coals by examining their penetrant uptake, front swelling and stress development. An important objective of this work was the study of coal network structure in different thermodynamically compatible penetrants and the analysis of dynamic swelling in terms of present anomalous transport theories. Interferometry/polariscopy, surface image analysis and related techniques were used to quantify the stresses and solvent concentration profiles in these sections. Dynamic and equilibrium swelling behavior were correlated using the polar interaction contributions of the solvent solubility parameters. The penetrant front position was followed in thin coal sections as a function of time. The initial front velocity was calculated for various coals and penetrants. Our penetrant studies with thin coal section from the same coal sample but with different thickness show that within the range of 150 {mu}m to 1500{mu}m the transport mechanism of dimethyl formamide in the macromolecular coal network is non-Fickian. In fact, for the thickest samples the transport mechanism is predominately Case-II whereas in the thinner samples penetrant uptake may be diffusion-controlled. Studies in various penetrants such as acetone, cyclohexane, methanol, methyl ethyl ketone, toluene and methylene chloride indicated that penetrant transport is a non-Fickian phenomenon. Stresses and cracks were observed for transport of methylene chloride. 73 refs., 88 figs., 15 tabs.

  4. Growth of coagulase-negative staphylococci on colistin-nalidixic acid agar and susceptibility to polymyxins.

    PubMed

    Fung, J C; McKinley, G; Tyburski, M B; Berman, M; Goldstein, J

    1984-05-01

    Colistin-nalidixic acid agar, although recently recommended as a replacement for blood agar for primary plating of urine specimens ( Fung et al., J. Clin. Microbiol. 16:632-636, 1982), has also been reported to suppress the growth of some strains of staphylococci that are susceptible to colistin (polymyxin E). The susceptibility of 11 species of staphylococci to polymyxins was determined, and the ability of these species to grow on colistin-nalidixic acid agar was examined. Although the MICs for most of the strains tested were 8 micrograms/ml or less, only a few coagulase-negative staphylococci grew on or were inhibited by colistin-nalidixic acid agar. This descrepancy was explained by the antagonistic effects that medium components, such as physiological concentrations of magnesium and calcium and 5% sheep blood, had on the activity of polymyxin. Colistin-nalidixic acid agar is still recommended for routine urine processing; however, the poor growth of 13% of the Staphylococcus saprophyticus strains tested suggests that blood agar should be included in the primary plating battery of urine specimens obtained from female outpatients. PMID:6330170

  5. Thin agar film for enhanced fungal growth and microscopic viewing in a new sealable fungal culture case.

    PubMed

    Hill, D R

    1996-09-01

    This project was undertaken to find ways to enhance fungus colony maturation, to make viewing of fungal cultures easier, and to reduce disruption of the fungal structures to be observed for identification. Accordingly, a technique using a thin (0.2-mm) agar film that avoids problems inherent in traditional methods of fungal culture and identification was developed. In addition, to accommodate the 0.2-mm layer of agar film and a contiguous thicker 4-mm section of agar, a sealable fungal culture case that fits within microscope stage calipers and under the objective lenses was invented. The growth and identification of 28 organisms were evaluated in the sealable fungal culture cases and on double-pour agar plates by using potato dextrose agar in both. Compared with results obtained with the double-pour agar plates (rated as "good"), fungal growth and identification with the sealable fungal culture case were superior (rated as "excellent") (P < 0.05, chi-square test). The thin agar film limits excessive mycelial growth, while it often promotes complete sporulation or other forms of maturation of the fungal colony. More importantly, the thin agar film allows direct microscopic viewing of the developing fungal colonies. The portion of the sealable fungal culture case with the 4-mm layer of agar can be used for evaluation of colony pigment and texture. In conclusion, this new sealable fungal culture case allows direct viewing and earlier fungal species identification with greater intrinsic safety. PMID:8862573

  6. [THE APPLICATION OF SELECTIVE CHROMOGENIC AGAR FOR DETECTING ENTEROBACTERIA WITH PRODUCTION OF BETA-LACTAMASES].

    PubMed

    Korobova, A G; Frolova, L N; Kliasova, G A

    2015-11-01

    The detection of enterobacteria with production of beta-lactamases of extended spectrum in selective chromogenic agar was analyzed The results ofdetection of beta-lactamases of extended spectrum was compared with "double disc" technique. The smears from mucous membrane of guttur and rectum from patients were analyzed in parallel on solid growth agar (Endo or Mac Conkey) and on selective agar CHROMagartm ESBL (CHROMagar France). The production of beta-lactamases of extended spectrum was confirmed using "double discs" technique. To exclude hyper-production of ampC beta-lactamases E-test was applied containing cefotetan and cefotetan with cloxacillin. The sampling consisted of 1552 samples from patients. The study permitted to isolate 1243 strains of enterobacteria on agar Endo or Mac Conkey and 409 strains of enterobacteria on selective agar CHROMagartm ESBL (Escherichia coli n = 226, Klebsiella pneumoniae n = 105, enterobacter spp. n = 35, Citrobacter spp. n = 21, others n = 22). The application of "double discs" technique confirmed production of beta-lactamases of extended spectrum in 386 (94%) out of 409 strains isolated on agar CHROMagartm ESBL. In 23 (6%) of strains no confirmation was established and hyper-production of ampC of beta-lactamases was established 15 out of total. Additionally, 8 were sensitive to cephalosporin of third generation. All enterobacteria isolated on agar Endo or Mac Conkey also were tested by "double discs" technique. Overall, 394 strains of enterobacteria with production of beta-lactamases of extended spectrum were obtained. On all agars (agar Endo or Mac Conkey and CHROMagartm ESBL)--263 (67%) strains; only on CHROMagartm ESBL--123 (31%) and only on agar Endo or Mac Conkey--8 (2%) (p < 0.0001). The sensitivity of selective agar CHROMagartm ESBL made up to 98% and specificity--97%. The resolution about detection of enterobacteria producing beta-lactamases of extended spectrum were submitted to clinic in 18-24 hours after arrival

  7. Tests of diffusion-free scaling behaviors in numerical dynamo datasets

    NASA Astrophysics Data System (ADS)

    Cheng, J. S.; Aurnou, J. M.

    2016-02-01

    Many dynamo studies extrapolate numerical model results to planetary conditions by empirically constructing scaling laws. The seminal work of Christensen and Aubert (2006) proposed a set of scaling laws that have been used throughout the geoscience community. These scalings make use of specially-constructed parameters that are independent of fluid diffusivities, anticipating that large-scale turbulent processes will dominate the physics in planetary dynamo settings. With these 'diffusion-free' parameterizations, the results of current numerical dynamo models extrapolate directly to fully-turbulent planetary core systems; the effects of realistic fluid properties merit no further investigation. In this study, we test the validity of diffusion-free heat transfer scaling arguments and their applicability to planetary conditions. We do so by constructing synthetic heat transfer datasets and examining their scaling properties alongside those proposed by Christensen and Aubert (2006). We find that the diffusion-free parameters compress and stretch the heat transfer data, eliminating information and creating an artificial alignment of the data. Most significantly, diffusion-free heat transfer scalings are found to be unrelated to bulk turbulence and are instead controlled by the onset of non-magnetic rotating convection, itself determined by the viscous diffusivity of the working fluid. Ultimately, our results, in conjunction with those of Stelzer and Jackson (2013) and King and Buffett (2013), show that diffusion-free scalings are not validated by current-day numerical dynamo datasets and cannot yet be extrapolated to planetary conditions.

  8. Diffusion tensor imaging of idiopathic normal-pressure hydrocephalus and the cerebrospinal fluid tap test.

    PubMed

    Kang, Kyunghun; Yoon, Uicheul; Choi, Woohyuk; Lee, Ho-Won

    2016-05-15

    We evaluated relationships between diffusion tensor imaging (DTI) findings and clinical profiles in idiopathic normal-pressure hydrocephalus (INPH) patients, along with differences in DTI parameters between cerebrospinal fluid tap test (CSFTT) responders and non-responders. Fifty-four INPH patients constituted the final group for analysis. Fractional anisotropy (FA), axial diffusivity, radial diffusivity, and mean diffusivity were assessed using atlas-based tract-mapping methods on 20 different fiber tracts. Uncorrected results revealed that CSFTT non-responders, when compared to responders, exhibited lower FA in the left anterior thalamic radiation (ATR), left cingulum-hippocampus (CgH), and left inferior fronto-occipital fasciculus (IFO) and higher axial diffusivity, radial diffusivity, and mean diffusivity in the left CgH and left inferior longitudinal fasciculus (ILF). FA values in the ATR (bilateral), corticospinal tract (right), IFO (bilateral), and ILF (bilateral) were negatively correlated with Unified Parkinson's Disease Rating Scale motor scores. In the right CgH, FA values showed significant positive correlations with Korean-Mini Mental State Examination scores and negative correlations with Clinical Dementia Rating Scale scores. Our findings may suggest a possibility for considering microstructural changes of white matter in patients with ventriculomegaly as potential imaging markers for the prediction of CSFTT responders. Unique patterns of white matter microstructural changes, as measured using DTI, might underlie impairments in distinct symptom domains in patients with INPH. PMID:27084223

  9. Nozzle diffuser for use with an open test section of a wind tunnel

    NASA Technical Reports Server (NTRS)

    Barna, P. Stephen (Inventor)

    1993-01-01

    The nozzle diffuser has an inlet in fluid communication with the narrowed inlet of an open test chamber in a conventional wind tunnel. The nozzle diffuser has a passageway extending from its inlet to an outlet in communication with the open test section. The passageway has an internal cross sectional area which increases from its inlet to its outlet and which may be defined by top and bottom isosceles trapezoid walls of a particular flare angle and by isosceles trapezoid side walls of a different flare angle. In addition, a collector having a decreasing internal cross sectional area from inlet to outlet may be provided at the opposite end of the test chamber such that its outlet is in communication with a diffuser located at this outlet.

  10. Casein Agar: a Useful Medium for Differentiating Candida dubliniensis from Candida albicans

    PubMed Central

    Mosca, Christian O.; Moragues, María D.; Llovo, José; Al Mosaid, Asmaa; Coleman, David C.; Pontón, José

    2003-01-01

    Production of chlamydospores on casein agar at 24°C for 48 h provides a simple means for differentiating Candida dubliniensis from Candida albicans based on chlamydospore production. Of 109 C. dubliniensis isolates tested on this medium, 106 (97.2%) produced abundant chlamydospores and three produced few chlamydospores. In contrast, of the 120 C. albicans isolates tested, 111 (92.5%) failed to produce any chlamydospores, whereas the remaining nine isolates produced few chlamydospores. These findings indicate that abundant chlamydospore production on casein agar is a useful test for discriminating between C. dubliniensis and C. albicans. PMID:12624062

  11. Development and Uncertainty Analysis of an Automatic Testing System for Diffusion Pump Performance

    NASA Astrophysics Data System (ADS)

    Zhang, S. W.; Liang, W. S.; Zhang, Z. J.

    A newly developed automatic testing system used in laboratory for diffusion pump performance measurement is introduced in this paper. By using two optical fiber sensors to indicate the oil level in glass-buret and a needle valve driven by a stepper motor to regulate the pressure in the test dome, the system can automatically test the ultimate pressure and pumping speed of a diffusion pump in accordance with ISO 1608. The uncertainty analysis theory is applied to analyze pumping speed measurement results. Based on the test principle and system structure, it is studied how much influence each component and test step contributes to the final uncertainty. According to differential method, the mathematical model for systematic uncertainty transfer function is established. Finally, by case study, combined uncertainties of manual operation and automatic operation are compared with each other (6.11% and 5.87% respectively). The reasonableness and practicality of this newly developed automatic testing system is proved.

  12. Preparation of an agar-silver nanoparticles (A-AgNp) film for increasing the shelf-life of fruits.

    PubMed

    Gudadhe, Janhavi A; Yadav, Alka; Gade, Aniket; Marcato, Priscyla D; Durán, Nelson; Rai, Mahendra

    2014-12-01

    Preparation of protective coating possessing antimicrobial properties is present day need as they increase the shelf life of fruits and vegetables. In the present study, preparation of agar-silver nanoparticle film for increasing the shelf life of fruits is reported. Silver nanoparticles (Ag-NPs) biosynthesised using an extract of Ocimum sanctum leaves, were mixed with agar-agar to prepare an agar-silver nanoparticles (A-AgNp) film. This film was surface-coated over the fruits, Citrus aurantifolium (Thornless lime) and Pyrus malus (Apple), and evaluated for the determination of antimicrobial activity of A-AgNp films using disc diffusion method, weight loss and shelf life of fruits. This study demonstrates that these A-AgNp films possess antimicrobial activity and also increase the shelf life of fruits. PMID:25429496

  13. Biological treatment of textile dyes by agar-agar immobilized consortium in a packed bed reactor.

    PubMed

    Patel, Yogesh; Gupte, Akshaya

    2015-03-01

    The decolorization of Acid Maroon V was investigated using bacterial consortium EDPA containing Enterobacter dissolvens AGYP1 and Pseudomonas aeruginosa AGYP2 immobilized in different entrapment matrices. The consortium displayed 96% removal of dye (100 mg/l) within 6 h when immobilized in agar-agar. Under optimum concentrations of agar-agar (3.0% w/v) and cell biomass (0.9 g% w/v), the consortium displayed decolorization for 18 successive batches of Acid Maroon V and also decolorized 14 other different textile dyes. A packed bed reactor under batch mode showed 89% decolorization of dye after 56 repetitive cycles. Under continuous flow mode, maximum color removal was achieved with bed length of 36 cm, hydraulic retention time of 2.66 h, and dye concentration of 100 mg/l. Additionally, the reactor decolorized relatively higher concentrations (100-2000 mg/l) of dye. The synthetic dye wastewater containing five textile dyes was decolorized 92% with 62% COD reduction using an immobilized consortium. PMID:25842535

  14. Recovery of spores of Clostridium botulinum in yeast extract agar and pork infusion agar after heat treatment.

    PubMed

    Odlaug, T E; Pflug, I J

    1977-10-01

    Yeast extract agar, pork infusion agar, and modifications of these media were used to recover heated Clostridium botulinum spores. The D- and z-values were determined. Two type A strains and one type B strain of C. botulinum were studied. In all cases the D-values were largest when the spores were recovered in yeast extract agar, compared to the D-values for spores recovered in pork infusion agar. The z-values for strains 62A and A16037 were largest when the spores were recovered in pork infusion agar. The addition of sodium bicarbonate and sodium thioglycolate to pork infusion agar resulted in D-values for C. botulinum 62A spores similar to those for the same spores recovered in yeast extract agar. The results suggest that sodium bicarbonate and sodium thioglycolate should be added to recovery media for heated C. botulinum spores to obtain maximum plate counts. PMID:335970

  15. An abbreviated scheme for identification of Yersinia enterocolitica isolated from food enrichments on CIN (cefsulodin-irgasan-novobiocin) agar.

    PubMed

    Devenish, J A; Schiemann, D A

    1981-09-01

    An abbreviated procedure for the biochemical identification of Yersinia enterocolitica isolated from food enrichments on CIN (cefsulodin-irgasan-novobiocin) agar was investigated. A total of 170 colonies resembling Y. enterocolitica in colonial morphology and appearance on CIN agar were selected for identification using API strips. Ninety-three of these isolates were examined with the PathoTec ornithine decarboxylase, Voges-Proskauer, and urease test strips. The PathoTec urease strip alone was adequate for identification of all isolates of Y. enterocolitica. Christensen's urea agar was applied to the remaining 77 isolates and found less specific in the 1 isolate of Enterobacter agglomerans was urease positive along with 10 isolates of Y. enterocolitica. CIN agar is a highly specific medium for isolation of Y. enterocolitica, requiring only Kligler iron agar and urea slants for confirmation of presumptive colonies. PMID:7306881

  16. Evaluation of CP Chromo Select Agar for the enumeration of Clostridium perfringens from water.

    PubMed

    Manafi, Mammad; Waldherr, Kerstin; Kundi, Michael

    2013-10-01

    The European Directive on drinking water quality has included mCP agar as the reference method for recovering Clostridium perfringens from drinking waters. In the present study, three media (mCP, TSCF and CP Chromo Select Agar) were evaluated for recovery of C. perfringens in different surface water samples. Out of 139 water samples, using a membrane filtration technique, 131 samples (94.2%) were found to be presumptively positive for C. perfringens in at least one of the culture media. Green colored colonies on CP Chromo Select Agar (CCP agar) were counted as presumptive C. perfringens isolates. Out of 483 green colonies on CCP agar, 96.3% (465 strains, indole negative) were identified as C. perfringens, and 15 strains (3.1%) were indole positive and were identified as Clostridium sordellii, Clostridium bifermentans or Clostridium tetani. Only 3 strains (0.6%) gave false positive results and were identified as Clostridium fallax, Clostridium botulinum, and Clostridium tertium. Variance analysis of the data obtained shows statistically no significant differences in the counts obtained between media employed in this work. The mCP method is very onerous for routine screening and bacterial colonies could not be used for further biochemical testing. The colonies on CCP and TSCF were easy to count and subculture for confirmation tests. TSCF detects sulfite-reducing clostridia, including species other than C. perfringens, and in some cases excessive blackening of the agar frustrated counting of the colonies. If the contamination was too high, TSCF did not consistently produce black colonies and as a consequence, the colonies were white and gave false negative results. On the other hand, the identification of typical and atypical colonies isolated from all media demonstrated that CCP agar was the most useful medium for C. perfringens recovery in water samples. PMID:23816139

  17. Ambiguity in measuring matrix diffusion with single-well injection/recovery tracer tests

    USGS Publications Warehouse

    Lessoff, S.C.; Konikow, L.F.

    1997-01-01

    Single-well injection/recovery tracer tests are considered for use in characterizing and quantifying matrix diffusion in dual-porosity aquifers. Numerical modeling indicates that neither regional drift in homogeneous aquifers, nor heterogeneity in aquifers having no regional drift, nor hydrodynamic dispersion significantly affects these tests. However, when drift is coupled simultaneously with heterogeneity, they can have significant confounding effects on tracer return. This synergistic effect of drift and heterogeneity may help explain irreversible flow and inconsistent results sometimes encountered in previous single-well injection/recovery tracer tests. Numerical results indicate that in a hypothetical single-well injection/recovery tracer test designed to demonstrate and measure dual-porosity characteristics in a fractured dolomite, the simultaneous effects of drift and heterogeneity sometimes yields responses similar to those anticipated in a homogeneous dual-porosity formation. In these cases, tracer recovery could provide a false indication of the occurrence of matrix diffusion. Shortening the shut-in period between injection and recovery periods may make the test less sensitive to drift. Using multiple tracers having different diffusion characteristics, multiple tests having different pumping schedules, and testing the formation at more than one location would decrease the ambiguity in the interpretation of test data.

  18. Automatic Surface Inoculation of Agar Trays1

    PubMed Central

    Wilkins, Judd R.; Mills, Stacey M.; Boykin, Elizabeth H.

    1972-01-01

    A machine is described which automatically inoculates a plastic tray containing agar media with a culture by use of either a conventional inoculating loop or a cotton swab. Isolated colonies were obtained with an inoculating loop when a heavy inoculum (109 cells/ml) was used or with a cotton swab when a light inoculum (ca. 104 cells/ml) was used. Trays containing combinations of differential or selective media were used to (i) separate mixtures of gram-positive and gram-negative bacteria, (ii) facilitate isolation of organisms from clinical specimens, and (iii) compare colony growth characteristics of pure cultures. The design of the machine is simple, it is easy to use, and it relieves the operator from the manual task of streaking cultures. Images PMID:16349943

  19. Poisoning with brown fly agaric, Amanita regalis.

    PubMed

    Elonen, E; Tarssanen, L; Härkönen, M

    1979-01-01

    Three patients ate different amounts of a common northern mushroom, brown fly agaric, Amanita regalis. All of them believed they had eaten delicious parasol mushrooms, Macrolepiota procera. The symptoms of poisoning began 1--2 hours after ingestion of the mushrooms. All the patients had marked gastrointestinal symptoms: nausea and heavy vomiting. Two had central nervous system manifestations and cholinergic symptoms: hallucinations, confusion, or loss of consciousness as well as copious salivation, or sweating. All patients recovered within 4--24 hours without any damage to liver, kidneys or central nervous system. It seems that cooking the mushrooms does not completely neutralize the toxic agents of Amanita regalis. The analysis of fried mushrooms shows that it may be possible to identify mushrooms reliably from the remains of a meal. PMID:760400

  20. Preparation and characterization of bio-nanocomposite films of agar and silver nanoparticles: laser ablation method.

    PubMed

    Rhim, Jong-Whan; Wang, Long-Feng; Lee, Yonghoon; Hong, Seok-In

    2014-03-15

    Silver nanoparticles (AgNPs) were prepared by a laser ablation method and composite films with the AgNPs and agar were prepared by solvent casting method. UV-vis absorbance test and transmission electron microscopy (TEM) analysis results revealed that non-agglomerated spherical AgNPs were formed by the laser ablation method. The surface color of the resulting agar/AgNPs films exhibited the characteristic plasmonic effect of the AgNPs with the maximum absorption peaks of 400-407 nm. X-ray diffraction (XRD) test results also exhibited characteristic AgNPs crystals with diffraction peaks observed at 2θ values of 38.39°, 44.49°, and 64.45°, which were corresponding to (111), (200), and (220) crystallographic planes of face-centered cubic (fcc) silver crystals, respectively. Thermogravimetric analysis (TGA) results showed that thermal stability of the agar/AgNPs composite films was increased by the inclusion of metallic silver. Water vapor barrier properties and surface hydrophobicity of the agar/AgNPs films increased slightly with the increase in AgNPs content but they were not statistically significant (p>0.05), while mechanical strength and stiffness of the composite films decreased slightly (p<0.05). The agar/AgNPs films exhibited distinctive antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli O157:H7) bacterial pathogens. PMID:24528754

  1. Quantitative Evaluation of Possible Errors Induced by Using Simplified Analytical Solutions to the Laboratory In-Diffusion Test

    SciTech Connect

    Nakajima, H.; Takeda, M.; Zhang, M.; Hiratsuka, T.

    2007-07-01

    Laboratory diffusion test has been widely used for characterizing the diffusive and adsorptive properties of synthetic, geological and geotechnical materials in many scientific fields and engineering practices. Although many types of laboratory diffusion test are currently available, different methods have different advantages and disadvantages. An overview of conventional test methods has recently been performed by Zhang and Takeda et al. (WM06) and rigorous solutions to the laboratory through-diffusion tests were developed and discussions on how to select an appropriate test method, design optimum test conditions and determine data sampling for the through-diffusion tests were performed by Takeda and Zhang et al. (WM06). In addition, theoretical evaluation of possible errors which may be caused by using simplified boundary conditions for developing solutions to the laboratory through-diffusion tests were quantitatively examined by Zhang and Takeda (WM05). As a new part of the systematic study, rigorous solutions to the laboratory in-diffusion test, with emphasis on the decreasing source concentration in-diffusion test, are further derived and illustrated in this paper. The new solutions are then used to exam possible errors which may be induced by using simplified solution in interpreting the in-diffusion test data, or data analyses. The theoretical examinations in this study found that the errors in determining the transport properties for a test specimen depend on both test condition and test duration. The conditions and/or applicability of using the simplified solutions are then clarified and illustrated through a series of theoretical simulations. The theories and approaches presented in this paper may offer practical considerations for effective implementations of an in-diffusion test and for proper interpretation of the test results. They can also be used to assess the quality of, or analyze the potential errors in existing data when citing them from

  2. Backswept impeller and vane island diffuser and shroud for NASA advanced-concepts compressor test rig

    NASA Technical Reports Server (NTRS)

    Perrone, G. L.; Holbrook, M. R.; Mcvaugh, J. M.

    1973-01-01

    A centrifugal impeller based on an existing backswept design was defined. In addition, a vaned diffuser was designed to match this impeller and also to be compatible with an existing 6:1 compressor test rig. The mechanical integrity of this design was verified by analysis. Hardware was procured and inspected to insure conformity with design tolerances. An overspeed test was successfully conducted on one of the impellers fabricated under this program.

  3. Performance of CHROMAGAR candida and BIGGY agar for identification of yeast species

    PubMed Central

    Yücesoy, Mine; Marol, Serhat

    2003-01-01

    Background The importance of identifying the pathogenic fungi rapidly has encouraged the development of differential media for the presumptive identification of yeasts. In this study two differential media, CHROMagar Candida and bismuth sulphite glucose glycine yeast agar, were evaluated for the presumptive identification of yeast species. Methods A total number of 270 yeast strains including 169 Candida albicans, 33 C. tropicalis, 24 C. glabrata, 18 C. parapsilosis, 12 C. krusei, 5 Trichosporon spp., 4 C. kefyr, 2 C. lusitaniae, 1 Saccharomyces cerevisiae and 1 Geotrichum candidum were included. The strains were first identified by germ tube test, morphological characteristics on cornmeal tween 80 agar and Vitek 32 and API 20 C AUX systems. In parallel, they were also streaked onto CHROMagar Candida and bismuth sulphite glucose glycine yeast agar plates. The results were read according to the color, morphology of the colonies and the existance of halo around them after 48 hours of incubation at 37°C. Results The sensitivity and specificity values for C. albicans strains were found to be 99.4, 100% for CHROMagar Candida and 87.0, 75.2% for BiGGY agar, respectively. The sensitivity of CHROMagar Candida to identify C. tropicalis, C. glabrata and C. krusei ranged between 90.9 and 100% while the specificity was 100%. The sensitivity rates for BiGGY agar were 66.6 and 100% while the specificity values were found to be 95.4 and 100% for C. tropicalis and C. krusei, respectively. Conclusions It can be concluded that the use of CHROMagar Candida is an easy and reliable method for the presumptive identification of most commonly isolated Candida species especially C. albicans, C. tropicalis and C. krusei. The lower sensitivity and specificity of BiGGY agar to identify commonly isolated Candida species potentially limits the clinical usefulness of this agar. PMID:14613587

  4. Test of the Universal Scaling Law of Diffusion in Colloidal Monolayers

    NASA Astrophysics Data System (ADS)

    Ma, Xiaoguang; Chen, Wei; Wang, Ziren; Peng, Yuan; Han, Yilong; Tong, Penger

    2013-02-01

    Using the techniques of optical microscopy and particle tracking, we measure the pair correlation function and Brownian diffusion in monolayers of strongly interacting colloidal particles suspended at or near three different interfaces and test the universal scaling law of the normalized diffusion coefficient, D˜≃eαΔS, as a function of the excess entropy ΔS for a wide range of particle concentrations. It is found that the universal scaling law with α=1 holds well for highly charged polystyrene spheres suspended at an air-water interface, where the strong electrostatic interactions play a dominant role. For monolayer suspensions of hard-sphere-like particles, where hydrodynamic interactions become important, deviations from the universal scaling law are observed. The experiment indicates that the hydrodynamic corrections could be incorporated into the universal scaling law of diffusion with an exponent α<1.

  5. Na and Li ion diffusion in modified ASTM C 1260 test by Magnetic Resonance Imaging (MRI)

    SciTech Connect

    Feng, X. Balcom, B.J.; Thomas, M.D.A.; Bremner, T.W.

    2008-12-15

    In the current study, MRI was applied to investigate lithium and sodium ion diffusion in cement paste and mortars containing inert sand and borosilicate glass. Paste and mortars were treated by complying with ASTM C 1260. Lithium and sodium distribution profiles were collected at different ages after different treatments. Results revealed that sodium ions had a greater diffusion rate than lithium ions, suggesting that Na reaches the aggregate particle surface before Li. Results also showed that Na and Li ions had a competitive diffusion process in mortars; soaking in a solution with higher [Li] favored Li diffusion but hindered Na diffusion. In mortars containing glass, a substantial amount of Li was consumed by the formation of ASR products. When [Li] in soaking solution was reduced to 0.37 N, a distinctive Na distribution profile was observed, indicating the free-state Na ions were continuously transformed to solid reaction products by ASR. Hence, in the modified ASTM C 1260 test, [Li] in the storage solution should be controlled at 0.74 N, in order to completely prevent the consumption of Na ions and thus stop ASR.

  6. Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions.

    PubMed

    Takeda, M; Nakajima, H; Zhang, M; Hiratsuka, T

    2008-04-28

    To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study. PMID:18355940

  7. Antimicrobial and physical-mechanical properties of agar-based films incorporated with grapefruit seed extract.

    PubMed

    Kanmani, Paulraj; Rhim, Jong-Whan

    2014-02-15

    The use of synthetic petroleum based packaging films caused serious environmental problems due to their difficulty in recycling and poor biodegradability. Therefore, present study was aimed to develop natural biopolymer-based antimicrobial packaging films as an alternative for the synthetic packaging films. As a natural antimicrobial agent, grapefruit seed extract (GSE) has been incorporated into agar to prepare antimicrobial packaging film. The films with different concentrations of GSE were prepared by a solvent casting method and the resulting composite films were examined physically and mechanically. In addition, the films were characterized by FE-SEM, XRD, FT-IR and TGA. The incorporation of GSE caused increase in color, UV barrier, moisture content, water solubility and water vapor permeability, while decrease in surface hydrophobicity, tensile strength and elastic modulus of the films. As the concentration of GSE increased from 0.6 to 13.3 μg/mL, the physical and mechanical properties of the films were affected significantly. The addition of GSE changed film microstructure of the film, but did not influence the crystallinity of agar and thermal stability of the agar-based films. The agar/GSE films exhibited distinctive antimicrobial activity against three test food pathogens, such as Listeria monocytogenes, Bacillus cereus and Escherichia coli. These results suggest that agar/GSE films have potential to be used in an active food packaging systems for maintaining food safety and extending the shelf-life of the packaged food. PMID:24507339

  8. Effect of Diethylaminoethyl Dextran on the Growth of Mycoplasma in Agar

    PubMed Central

    Tauraso, Nicola M.

    1967-01-01

    The growth of certain strains of Mycoplasma is inhibited by substances present in commercial agar preparations. The addition of diethylaminoethyl (DEAE) dextran (10 mg per 100 ml) to agar media appears to enhance the growth of some strains. Of eight strains initially tested, the presence of DEAE dextran grossly enhanced the growth of three strains. One strain appeared not to be affected, and a clearly enhancing effect was not evident with four strains. Quantitative studies revealed that growth enhancement varied from 10 colony-forming units (CFU) for M. hominis type II (strain Campo) to 103.3 CFU for M. pulmonis (strain 880). The growth-enhancing effect is probably due to the ability of DEAE dextran to bind the sulfated polysaccharide moieties in agar and not to the DEAE dextran, per se. Images PMID:6025444

  9. Blood agar to detect virulence factors in tap water heterotrophic bacteria.

    PubMed Central

    Payment, P; Coffin, E; Paquette, G

    1994-01-01

    Cytolytic colonies were found in 57% of tap water samples, and up to 6% of samples were found to contain bacteria having three or more virulence factors. The factors evaluated were cytotoxicity, hemolysis, cell adherence, and cell invasiveness. Overall, 17% of the samples contained cytolytic colonies that were adherent and hemolytic. Among the media tested, tryptic soy agar with sheep blood (incubated at 35 degrees C for 48 h) was the best medium for the detection of cytolytic colonies. Of the colonies growing on this medium, 13% were cytolytic, whereas on medium R2A, less than 3% were cytolytic. Furthermore, when tryptic soy agar with blood was used, 24% of the samples contained colonies with at least three virulence factors whereas only 5% were positive with R2A. Routine monitoring by using tryptic soy agar with sheep blood is suggested as an appropriate procedure for the detection of bacteria with pathogenic potential in drinking water. PMID:8017913

  10. Educational Managers' Guide to Diffusion: An Instructional/Assessment Resource for Educators Engaged in Program Diffusion. Field Test Version.

    ERIC Educational Resources Information Center

    Williams, Martha; And Others

    This guide defines diffusion as the process by which a program or technique is transferred from the site where it was developed to another site. Effective diffusion is based on an understanding of how people and organizations can be helped to change as well as how programs are implemented. It is preceded by a carefully planned transition from…

  11. Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion–reaction based continuum model

    NASA Astrophysics Data System (ADS)

    Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

    2016-08-01

    Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion–reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm’s shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here.

  12. Comparison of E-test with broth microdilution and disk diffusion for susceptibility testing of coryneform bacteria.

    PubMed

    Martínez-Martínez, L; Ortega, M C; Suárez, A I

    1995-05-01

    The susceptibilities of 135 coryneform bacteria isolated from clinical samples to ampicillin (AMP), cephalothin (CR), cefoxitin (FOX), cefotaxime (CTX), erythromycin (E), ciprofloxacin (CIP), tetracycline (TE), amikacin (AK), vancomycin (VA), and rifampin (R) were determined by disk diffusion, broth microdilution, and the E-test. The following species (number of isolates in parentheses) were included: Corynebacterium urealyticum (30), Corynebacterium minutissimum (20), coryneform CDC group ANF-1 (20), Corynebacterium striatum (20), Corynebacterium jeikeium (15), coryneform CDC group I2 (8), Listeria monocytogenes (7), Corynebacterium xerosis (5), and other coryneform bacteria (10). Agreement within one twofold dilution between the E-test and broth microdilution was 31% (VA), 64% (AK), 71% (CTX), 77% (FOX and CIP), 79% (TE), 84% (AMP), 87% (E), and 88% (CR and R). For the 1,350 combinations of microorganisms and antimicrobial agents, 85 (6.3%) discrepancies in interpretive category were found (4.2% minor, 1.2% major, and 0.9% very major). Seventy (5.1%) disagreements in interpretive category were found between disk diffusion and the E-test (3.8% minor, 0.4% major, and 0.9% very major), and 85 (6.3%) disagreements were found between microdilution (reference method) and disk diffusion (4.2% minor, 0.5% major, and 1.5% very major). MICs obtained with the E-test were highly reproducible. No category discrepancy was observed for VA, despite quantitative results. Considering interpretive categories, there is a good overall agreement between the three methods studied here, but further evaluation of current methodologies for susceptibility testing is required when considering coryneform bacteria and determination of quantitative activity of antimicrobial agents. PMID:7615748

  13. Diffusion coefficients estimated from turbulence data measured by the Metrac positioning system in Minneapolis field test

    NASA Technical Reports Server (NTRS)

    Gage, K. S.; Jasperson, W. H.

    1977-01-01

    An analysis is presented of the tropospheric turbulence data obtained by the Metrac positioning system, a radio location system which employs the Doppler principle to track inexpensive expendable balloon-borne transmitters. A Minneapolis field test of the Metrac system provided one-second samples of transmitter frequency from balloons tracked by four ground stations for more than an hour. The derivation of diffusion coefficients from the turbulence data was conducted by two methods, yielding highly consistent results.

  14. Selected elements in fly agaric Amanita muscaria.

    PubMed

    Falandysz, J; Kunito, T; Kubota, R; Lipka, K; Mazur, A; Falandysz, Justyna J; Tanabe, S

    2007-09-01

    Concentrations of Ag, Al, Ba, Ca, Cd, Co, Cu, Cr, Cs, Fe, Ga, Hg, K, Mg, Mn, Mo, Na, Pb, Rb, Se, Sb, Sr, V, Tl and Zn have been determined in the whole fruiting bodies, as well as separately in caps and stalks, of fly agaric collected from three geographically distant sites in northern part of Poland. The elements were determined using ICP-MS, ICP-OES, HG-AAS and CV-AAS, respectively. For elements such as Al, Ba, Cr, Fe, Ga, Mo, Mn, Pb, Sb, Sr, Tl, and V concentrations were similar in the caps and stalks, respectively, and for K, Zn, Ag, Ca, Cd, Cu, Hg, Mg, Rb and Se were greater in the caps, while for Co, Cs and Na in the stalks. For Ag, Al, Ba, Ca, Cd, Co, Cr, Cs, Fe, Ga, Hg, Mn, Mo, Pb, Rb, Sb, Sr, Tl and V concentration in the caps showed spatial variations (P<0.05), while for Cu, K, Mg, Na, Se and Zn was independent of the site. The elements such as K with median or mean in the caps between 37,000 and 43,000 microg/g.dm and Mg with 920 and 1,100 microg/g dm were most abundant. Next, within median values range from approximately 100 to 500 microg/g dm were such as Ca, Fe and Al, and in descending order they followed by Rb (100-400 microg/g dm); V, Na, Zn (50-200 microg/g dm); Cu, Mn (10-50 microg/g dm); Cd (10-20 microg/g dm); Se (5 microg/g dm); Ba (<1-3); Cr, Ag, Pb, Sr (<1-2 microg/g dm); Cs, Co, Hg (<1-1 microg/g dm); Ga (<0.5), Sb, Mo and Tl (<0.1 microg/g dm). PMID:17849303

  15. Growth of clinical isolates of anaerobic bacteria on agar media: effects of media composition, storage conditions, and reduction under anaerobic conditions.

    PubMed Central

    Murray, P R

    1978-01-01

    The quantitative growth, the colony size, and the rate of growth of 47 clinical anaerobic isolates were compared on five different media, namely Brucella agar, brain heart infusion agar, Columbia agar, Schaedler agar, and tryptic soy agar. There was no significant difference in the quantitative growth of the anaerobes inoculated onto the five media. Although no single medium was superior for the growth of all isolates, 12 of 22 isolates, inoculated onto media stored for 4 weeks or less, grew best on Schaedler agar. The effects of supplementation of the media with reducing agents and reduction of the media before use were also analyzed and were found to be affected by the composition and length of storage of the media, as well as the bacteria tested. PMID:744801

  16. Comparison of ChromID Agar and Clostridium difficile Selective Agar for Effective Isolation of C. difficile from Stool Specimens

    PubMed Central

    Lee, Eun Joo

    2014-01-01

    Background ChromID Clostridium difficile agar (IDCd; bioMérieux SA, France) is a recently developed chromogenic medium for rapid and specific isolation of C. difficile. We compared the performance of IDCd with that of Clostridium difficile Selective Agar (CDSA). Methods A total of 530 fresh stool specimens were collected from patients with clinical signs compatible with C. difficile infection, and cultures for C. difficile were performed on IDCd and CDSA. C. difficile colonies were identified by spore staining, odor, use of an ANI identification test kit (bioMérieux SA), and multiplex PCR for tcdA, tcdB, and tpi. Results The concordance rate between IDCd and CDSA was 90.6% (480/530). The positivity rates on IDCd on days 1 and 2 (55.6% and 85.0%, respectively) were significantly higher than those on CDSA (19.4% and 75.6%, respectively) (P<0.001 for day 1 and P=0.02 for day 2), but the detection rates on IDCd and CDSA on day 3 were not different (89.4% vs. 82.8%, P=0.0914). On day 3, the recovery rates for non-C. difficile isolates on IDCd and CDSA were 30.2% (160/530) and 22.1% (117/530), respectively (P=0.0075). Clostridium spp. other than C. difficile were the most prevalent non-C. difficile isolates on both media. Conclusions The culture positivity rates on IDCd and CDSA were not different on day 3 but IDCd may allow for rapid and sensitive detection of C. difficile within 2 days of cultivation. PMID:24422190

  17. Random Vibration Tests for Prediction of Fatigue Life of Diffuser Structure for Gas Dynamic Laser

    NASA Astrophysics Data System (ADS)

    Maurer, O. F.; Banaszak, D. L.

    1980-01-01

    Static and dynamic strain measurements which were taken during test stand operations of the gas dynamic laser (GDL) for the AF Airborne Laser Laboratory indicated that higher than expected vibrational stress levels may possibly limit the fatigue life of the laser structure. Particularly the diffuser sidewall structure exhibited large amplitude random vibrations which were excited by the internal gas flow. The diffuser structure consists of two layers of brazed stainless steel, AISI-347, panels. Cooling ducts were milled into the outer face sheet. These in turn are backed by the inner face sheet. So called T-rail stiffeners silver-brazed to the outer face sheets add the required stiffness and divide the sidewall into smaller rectangular plate sections.

  18. Landsat test of diffuse reflectance models for aquatic suspended solids measurement

    NASA Technical Reports Server (NTRS)

    Munday, J. C., Jr.; Alfoldi, T. T.

    1979-01-01

    Landsat radiance data were used to test mathematical models relating diffuse reflectance to aquatic suspended solids concentration. Digital CCT data for Landsat passes over the Bay of Fundy, Nova Scotia were analyzed on a General Electric Co. Image 100 multispectral analysis system. Three data sets were studied separately and together in all combinations with and without solar angle correction. Statistical analysis and chromaticity analysis show that a nonlinear relationship between Landsat radiance and suspended solids concentration is better at curve-fitting than a linear relationship. In particular, the quasi-single-scattering diffuse reflectance model developed by Gordon and coworkers is corroborated. The Gordon model applied to 33 points of MSS 5 data combined from three dates produced r = 0.98.

  19. Preparation, testing and analysis of zinc diffusion samples, NASA Skylab experiment M-558

    NASA Technical Reports Server (NTRS)

    Braski, D. N.; Kobisk, E. H.; Odonnell, F. R.

    1974-01-01

    Transport mechanisms of zinc atoms in molten zinc were investigated by radiotracer techniques in unit and in near-zero gravity environments. Each melt in the Skylab flight experiments was maintained in a thermal gradient of 420 C to 790 C. Similar tests were performed in a unit gravity environment for comparison. After melting in the gradient furnace followed by a thermal soak period (the latter was used for flight samples only), the samples were cooled and analyzed for Zn-65 distribution. All samples melted in a unit gravity environment were found to have uniform Zn-65 distribution - no concentration gradient was observed even when the sample was brought rapidly to melting and then quenched. Space-melted samples, however, showed textbook distributions, obviously the result of diffusion. It was evident that convection phenomena were the dominant factors influencing zinc transport in unit gravity experiments, while diffusion was the dominant factor in near-zero gravity experiments.

  20. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung-Chul; Shin, Tae-Sung; Park, Bosoon; Lawrence, Kurt C.; Heitschmidt, Gerald W.

    2014-03-01

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance spectra measured in the visible and near-infrared spectral range from 400 and 1,000 nm (473 narrow spectral bands). Multivariate regression methods were used to estimate and predict hyperspectral data from RGB color values. The six representative non-O157 Shiga-toxin producing Eschetichia coli (STEC) serogroups (O26, O45, O103, O111, O121, and O145) were grown on Rainbow agar plates. A line-scan pushbroom hyperspectral image sensor was used to scan 36 agar plates grown with pure STEC colonies at each plate. The 36 hyperspectral images of the agar plates were divided in half to create training and test sets. The mean Rsquared value for hyperspectral image estimation was about 0.98 in the spectral range between 400 and 700 nm for linear, quadratic and cubic polynomial regression models and the detection accuracy of the hyperspectral image classification model with the principal component analysis and k-nearest neighbors for the test set was up to 92% (99% with the original hyperspectral images). Thus, the results of the study suggested that color-based detection may be viable as a multispectral imaging solution without much loss of prediction accuracy compared to hyperspectral imaging.

  1. Designing, Modeling, Constructing, and Testing a Flat Panel Speaker and Sound Diffuser for a Simulator

    NASA Technical Reports Server (NTRS)

    Dillon, Christina

    2013-01-01

    The goal of this project was to design, model, build, and test a flat panel speaker and frame for a spherical dome structure being made into a simulator. The simulator will be a test bed for evaluating an immersive environment for human interfaces. This project focused on the loud speakers and a sound diffuser for the dome. The rest of the team worked on an Ambisonics 3D sound system, video projection system, and multi-direction treadmill to create the most realistic scene possible. The main programs utilized in this project, were Pro-E and COMSOL. Pro-E was used for creating detailed figures for the fabrication of a frame that held a flat panel loud speaker. The loud speaker was made from a thin sheet of Plexiglas and 4 acoustic exciters. COMSOL, a multiphysics finite analysis simulator, was used to model and evaluate all stages of the loud speaker, frame, and sound diffuser. Acoustical testing measurements were utilized to create polar plots from the working prototype which were then compared to the COMSOL simulations to select the optimal design for the dome. The final goal of the project was to install the flat panel loud speaker design in addition to a sound diffuser on to the wall of the dome. After running tests in COMSOL on various speaker configurations, including a warped Plexiglas version, the optimal speaker design included a flat piece of Plexiglas with a rounded frame to match the curvature of the dome. Eight of these loud speakers will be mounted into an inch and a half of high performance acoustic insulation, or Thinsulate, that will cover the inside of the dome. The following technical paper discusses these projects and explains the engineering processes used, knowledge gained, and the projected future goals of this project

  2. Testing the dark matter interpretation of the PAMELA excess through measurements of the galactic diffuse emission

    SciTech Connect

    Regis, Marco; Ullio, Piero

    2009-08-15

    We propose to test the dark matter (DM) interpretation of the positron excess observed by the PAMELA cosmic-ray (CR) detector through the identification of a Galactic diffuse gamma-ray component associated to DM-induced prompt and radiative emission. The goal is to present an analysis based on minimal sets of assumptions and extrapolations with respect to locally testable or measurable quantities. We discuss the differences between the spatial and spectral features for the DM-induced components (with an extended, possibly spherical, source function) and those for the standard CR contribution (with sources confined within the stellar disc), and propose to focus on intermediate and large latitudes. We address the dependence of the signal to background ratio on the model adopted to describe the propagation of charged CRs in the Galaxy, and find that, in general, the DM-induced signal can be detected by the Fermi Gamma-ray Space Telescope at energies above 100 GeV. An observational result in agreement with the prediction from standard CR components only, would imply very strong constraints on the DM interpretation of the PAMELA excess. On the other hand, if an excess in the diffuse emission above 100 GeV is identified, the angular profile for such emission would allow for a clean disentanglement between the DM interpretation and astrophysical explanations proposed for the PAMELA excess. We also compare to the radiative diffuse emission at lower frequencies, sketching, in particular, the detection prospects at infrared frequencies with the Planck satellite.

  3. Optical alignment and testing of the Diffuse IR Background Experiment IR cryogenic telescope

    NASA Technical Reports Server (NTRS)

    Wood, H. John

    1989-01-01

    Diffuse Infrared Background Experiment (DIRBE) optical alignment and testing methods are discussed. Using strobe videography, vibration and performance testing of a 32 hz tuning-fork chopper was carried out. The Cosmic Background explorer satellite provides improved microwave and IR all-sky maps of the cosmic background radiation from a polar orbit. A liquid helium cryostat houses the DIRBE and the Far IR Absolute Spectrophotometer (FIRAS) instruments at a temperature of 2 K. Differential MicRowave Radiometers (DMRs) provide large scale maps of anisotropy of the 3 K background at wavelengths of 3.3, 5.7, and 9.6 mm. The DIRBE telescope is an IR photometric instrument with 10 wavelength bands between 1 and 300 microns, designed to measure radiation from the epoch of galaxy formation. Stringent stray light requirements mean that the DIRBE flight instrument has to be built and tested in a class 100 environment.

  4. Identification of prefrontal cortex (BA10) activation while performing Stroop test using diffuse optical tomography

    NASA Astrophysics Data System (ADS)

    Khadka, Sabin; Chityala, Srujan R.; Tian, Fenghua; Liu, Hanli

    2011-03-01

    Stroop test is commonly used as a behavior-testing tool for psychological examinations that are related to attention and cognitive control of the human brain. Studies have shown activations in Broadmann area 10 (BA10) of prefrontal cortex (PFC) during attention and cognitive process. The use of diffuse optical tomography (DOT) for human brain mapping is becoming more prevalent. In this study we expect to find neural correlates between the performed cognitive tasks and hemodynamic signals detected by a DOT system. Our initial observation showed activation of oxy-hemoglobin concentration in BA 10, which is consistent with some results seen by positron emission tomography (PET) and functional magnetic resonance imaging (fMRI). Our study demonstrates the possibility of combining DOT with Stroop test to quantitatively investigate cognitive functions of the human brain at the prefrontal cortex.

  5. Comparative modeling of an in situ diffusion experiment in granite at the Grimsel Test Site.

    PubMed

    Soler, Josep M; Landa, Jiri; Havlova, Vaclava; Tachi, Yukio; Ebina, Takanori; Sardini, Paul; Siitari-Kauppi, Marja; Eikenberg, Jost; Martin, Andrew J

    2015-08-01

    An in situ diffusion experiment was performed at the Grimsel Test Site (Switzerland). Several tracers ((3)H as HTO, (22)Na(+), (134)Cs(+), (131)I(-) with stable I(-) as carrier) were continuously circulated through a packed-off borehole and the decrease in tracer concentrations in the liquid phase was monitored for a period of about 2years. Subsequently, the borehole section was overcored and the tracer profiles in the rock analyzed ((3)H, (22)Na(+), (134)Cs(+)). (3)H and (22)Na(+) showed a similar decrease in activity in the circulation system (slightly larger drop for (3)H). The drop in activity for (134)Cs(+) was much more pronounced. Transport distances in the rock were about 20cm for (3)H, 10cm for (22)Na(+), and 1cm for (134)Cs(+). The dataset (except for (131)I(-) because of complete decay at the end of the experiment) was analyzed with different diffusion-sorption models by different teams (IDAEA-CSIC, UJV-Rez, JAEA) using different codes, with the goal of obtaining effective diffusion coefficients (De) and porosity (ϕ) or rock capacity (α) values. From the activity measurements in the rock, it was observed that it was not possible to recover the full tracer activity in the rock (no activity balance when adding the activities in the rock and in the fluid circulation system). A Borehole Disturbed Zone (BDZ) had to be taken into account to fit the experimental observations. The extension of the BDZ (1-2mm) is about the same magnitude than the mean grain size of the quartz and feldspar grains. IDAEA-CSIC and UJV-Rez tried directly to match the results of the in situ experiment, without forcing any laboratory-based parameter values into the models. JAEA conducted a predictive modeling based on laboratory diffusion data and their scaling to in situ conditions. The results from the different codes have been compared, also with results from small-scale laboratory experiments. Outstanding issues to be resolved are the need for a very large capacity factor in the

  6. Characterization of agar/soy protein biocomposite films: Effect of agar on the extruded pellets and compression moulded films.

    PubMed

    Garrido, T; Etxabide, A; Guerrero, P; de la Caba, K

    2016-10-20

    Agar/soy protein biocomposite films were successfully processed by extrusion and compression moulding, obtaining transparent and homogeneous films. The conformational changes occurred during the extrusion process and the effect of agar on the final properties were analyzed. As shown by differential scanning calorimetry (DSC) and specific mechanical energy (SME) values, during the extrusion process protein denatured and unfolded protein chains could interact with agar. These interactions were analyzed by Fourier transform infrared spectroscopy (FTIR) and the secondary structure was determined from the amide I band. Those interactions were supported by the decrease of film solubility. Furthermore, the good compatibility between agar and soy protein was confirmed by the images from scanning electron microscopy (SEM). PMID:27474583

  7. Gas diffusion electrode setup for catalyst testing in concentrated phosphoric acid at elevated temperatures

    SciTech Connect

    Wiberg, Gustav K. H. E-mail: m.arenz@chem.ku.dk; Fleige, Michael; Arenz, Matthias E-mail: m.arenz@chem.ku.dk

    2015-02-15

    We present a detailed description of the construction and testing of an electrochemical cell setup allowing the investigation of a gas diffusion electrode containing carbon supported high surface area catalysts. The setup is designed for measurements in concentrated phosphoric acid at elevated temperature, i.e., very close to the actual conditions in high temperature proton exchange membrane fuel cells (HT-PEMFCs). The cell consists of a stainless steel flow field and a PEEK plastic cell body comprising the electrochemical cell, which exhibits a three electrode configuration. The cell body and flow field are braced using a KF-25 vacuum flange clamp, which allows an easy assembly of the setup. As demonstrated, the setup can be used to investigate temperature dependent electrochemical processes on high surface area type electrocatalysts, but it also enables quick screening tests of HT-PEMFC catalysts under realistic conditions.

  8. PITCH-ANGLE SCATTERING: RESONANCE VERSUS NONRESONANCE, A BASIC TEST OF THE QUASILINEAR DIFFUSIVE RESULT

    SciTech Connect

    Ragot, B. R.

    2012-01-01

    Due to the very broad range of the scales available for the development of turbulence in space and astrophysical plasmas, the energy at the resonant scales of wave-particle interaction often constitutes only a tiny fraction of the total magnetic turbulent energy. Despite the high efficiency of resonant wave-particle interaction, one may therefore question whether resonant interaction really is the determining interaction process between particles and turbulent fields. By evaluating and comparing resonant and nonresonant effects in the frame of a quasilinear calculation, the dominance of resonance is here put to the test. By doing so, a basic test of the classical resonant quasilinear diffusive result for the pitch-angle scattering of charged energetic particles is also performed.

  9. Production of microbial medium from defatted brebra (Milletia ferruginea) seed flour to substitute commercial peptone agar

    PubMed Central

    Andualem, Berhanu; Gessesse, Amare

    2013-01-01

    Objective To investigate and optimize microbial media that substitute peptone agar using brebra seed defatted flour. Methods 'Defatted process, inoculums preparation, evaluation of bacterial growth, preparation of cooked and hydrolyzed media and growth turbidity of tested bacteria were determined. Results Two percent defatted flour was found to be suitable concentration for the growth of pathogenic bacteria: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (ATCC 27853), Salmonella (NCTC 8385) and Shigella flexneri (ATCC 12022) (S. flexneri), while 3% defatted flour was suitable for Staphylococcus aureus (ATCC 25923) (S. aureus). E. coli (93±1) and S. flexneri (524±1) colony count were significantly (P≤0.05) greater in defatted flour without supplement than in supplemented medium. E. coli [(3.72×109±2) CFU/mL], S. aureus [(7.4×109±2) CFU/mL], S. flexneri [(4.03×109±2) CFU/mL] and Salmonella [(2.37×109±1) CFU/mL] in non-hydrolyzed sample were statistically (P≤0.05) greater than hydrolyzed one and commercial peptone agar. Colony count of Salmonella [(4.55×109±3) CFU/mL], S. flexneri [(5.40×109±3) CFU/mL] and Lyesria moncytogenes (ATCC 19116) [(5.4×109±3) CFU/mL] on raw defatted flour agar was significantly (P≤0.05) greater than cooked defatted flour and commercial peptone agar. Biomass of E. coli, S. aureus, Salmonella and Enterococcus faecalis in non-hydrolyzed defatted flour is highly increased over hydrolyzed defatted flour and commercial peptone broth. Conclusions The defatted flour agar was found to be better microbial media or comparable with peptone agar. The substances in it can serve as sources of carbon, nitrogen, vitamins and minerals that are essential to support the growth of microorganisms without any supplements. Currently, all supplements of peptone agar are very expensive in the market. PMID:24075344

  10. The analysis of beryllium-copper diffusion joint after HHF test

    SciTech Connect

    Guiniatouline, R.N.; Mazul, I.V.; Rubkin, S.Y.

    1995-09-01

    The development of beryllium-copper joints which can withstand to relevant ITER divertor conditions is one of the important tasks at present time. One of the main problem for beryllium-copperjoints, is the inter-metallic layers, the strength and life time of joints significantly depends from the width and contents of the intermetallic layers. The objective of this work is to study the diffusion joint of TGP-56 beryllium to OFHC copper after thermal response and thermocyclic tests with beryllium-copper mockup. The BEY test were performed at e-beam facility (EBTS, SNLA). The following methods were used for analyses: the roentgenographic analysis; X-ray spectrum analysis; the fracture graphic analysis. During the investigation the followed studies were done: the analysis of diffusion boundary Be-Cu, which was obtained at the crossection of one of the tiles, the analysis of the debonded surfaces of a few beryllium tiles and corresponding copper parts; the analysis of upper surface of one of the tiles after HHF tests. The results of this work have showed that: the joint roentgenographic and elements analyses indicated the following phases in the diffusion zone: Cu{sub 2}Be ({approximately}170 {mu}m), CuBe ({approximately}30{mu}m), CuBe{sub 2} ({approximately}1 {mu}m) and solid solution of copper in beryllium. The phases Cu{sub 2}Be, CuBe and solid solution of copper in beryllium were indicated using quantitative microanalysis and phases CuBe, CuBe{sub 2}, Cu, Be - by roentgenographic analysis; the source of fracture (initial crack) is located in the central part of the tiles, the crack caused by the influence of residual stresses during cooling of a mock-up after fabrication and developed under the conditions of slow elastic-plastic growing during the process of thermal fatigue testing. The analysis gives the important data about joint`s quality and also may be used for any type of joints and its comparison for ITER applications.

  11. Enumeration of fecal Clostridium perfringens spores in egg yolk-free tryptose-sulfite-cycloserine agar.

    PubMed

    Hauschild, A H; Hilsheimer, R; Griffith, D W

    1974-03-01

    The Shahidi-Ferguson perfringens, tryptose-sulfite-cycloserine (TSC), and egg yolk-free TSC agars have been tested for their suitability to enumerate fecal spores of Clostridium perfringens. When these spores comprised at least 20% of the total anaerobe spores, equally accurate counts were obtained in the three media. With lower ratios of C. perfringens spores, the most accurate counts were obtained in egg yolk-free TSC agar. The median C. perfringens spore count of 60 normal fecal specimens was log 3.4/g. A nonmotile, sulfite- and nitrate-reducing Clostridium, not identifiable with any known clostridial species, was isolated from 14 out of 60 fecal specimans. It was not differentiated from C. perfringens in the nitrite motility test, but could be distinguished by its inability to liquefy gelatin. PMID:4363369

  12. Enumeration of Fecal Clostridium perfringens Spores in Egg Yolk-Free Tryptose-Sulfite-Cycloserine Agar

    PubMed Central

    Hauschild, A. H. W.; Hilsheimer, R.; Griffith, D. W.

    1974-01-01

    The Shahidi-Ferguson perfringens, tryptose-sulfite-cycloserine (TSC), and egg yolk-free TSC agars have been tested for their suitability to enumerate fecal spores of Clostridium perfringens. When these spores comprised at least 20% of the total anaerobe spores, equally accurate counts were obtained in the three media. With lower ratios of C. perfringens spores, the most accurate counts were obtained in egg yolk-free TSC agar. The median C. perfringens spore count of 60 normal fecal specimens was log 3.4/g. A nonmotile, sulfite- and nitrate-reducing Clostridium, not identifiable with any known clostridial species, was isolated from 14 out of 60 fecal specimans. It was not differentiated from C. perfringens in the nitrite motility test, but could be distinguished by its inability to liquefy gelatin. PMID:4363369

  13. Laboratory detection of extended-spectrum-beta-lactamase-producing Enterobacteriaceae: evaluation of two screening agar plates and two confirmation techniques.

    PubMed

    Overdevest, I T M A; Willemsen, I; Elberts, S; Verhulst, C; Kluytmans, J A J W

    2011-02-01

    The worldwide prevalence of extended-spectrum-beta-lactamase-producing ESBL-producing Enterobacteriaceae (ESBL-E) is increasing, making the need for optimized detection techniques more urgent. In this study we investigated the performance of two ESBL-E screening and two ESBL-E confirmation techniques. In accordance with the Dutch national guidelines (www.wip.nl), a collection of 642 highly resistant Enterobacteriaceae strains, as identified by Vitek2, was used to test the performances of two screening techniques (EbSA ESBL agar plate and ChromID ESBL agar plate) and of two confirmation techniques (MIC-strip ESBL and Vitek2 ESBL test panel). The individual test results were compared by using Etest, followed by a combination disk test if Etest results were inconclusive. Among group 1 isolates (Escherichia coli, Klebsiella spp., Proteus spp., Salmonella spp., and Shigella spp.) 291 (57.6%) were ESBL-E, versus 65 (47.4%) in group 2 (Enterobacter spp., Citrobacter spp., Morganella morganii, Serratia spp., and Providencia spp.). The sensitivities of all four tests for group 1 were comparable (EbSA, 96.6%; ChromID, 97.3%; MIC-strip, 99.6%; and Vitek2, 95.1%). The specificities of the EbSA and ChromID were the same (93.9%). However, the confirmation techniques produced many inconclusive test results, which reduces the applicability in routine laboratories. Only the two screening agar plates were validated for ESBL testing of group 2 microorganisms. They showed comparable sensitivities; however, the EbSA screening agar plate had a significantly higher specificity (78.6% versus 44.3%). In conclusion the screening agar plates performed better than the two confirmation techniques. The EbSA agar plate had the best overall performance. PMID:21123527

  14. Enumeration of food-borne Clostridium perfringens in egg yolk-free tryptose-sulfite-cycloserine agar.

    PubMed

    Hauschild, A H; Hilsheimer, R

    1974-03-01

    The SFP (Shahidi-Ferguson perfringens), TSC (tryptose-sulfite-cycloserine), EY (egg yolk)-free TSC, and OPSP (oleandomycin-polymyxin-sulfadiazine perfringens) agars have been tested for their suitability to enumerate Clostridium perfringens in naturally contaminated foods. Complete recoveries of C. perfringens were obtained in each of the four media, but only the TSC and EY-free TSC agars were sufficiently selective to ensure subsequent confirmatory tests without interference from facultative anaerobes. Because of some disadvantages associated with the use of egg yolk, EY-free TSC agar is recommended for enumeration of C. perfringens in foods. Several conditions for convenient shipment of foods and C. perfringens isolates with minimum loss of viability have been tested. The highest viable counts were preserved when foods were mixed 1:1 (wt/vol) with 20% glycerol and kept in a container with dry ice. Isolated C. perfringens strains remained viable for at least 2 weeks at ambient temperatures on blood agar slopes with a 2% agar overlay in screw-cap culture tubes. PMID:4363368

  15. Enumeration of Food-Borne Clostridium perfringens in Egg Yolk-Free Tryptose-Sulfite-Cycloserine Agar

    PubMed Central

    Hauschild, A. H. W.; Hilsheimer, R.

    1974-01-01

    The SFP (Shahidi-Ferguson perfringens), TSC (tryptose-sulfite-cycloserine), EY (egg yolk)-free TSC, and OPSP (oleandomycin-polymyxin-sulfadiazine perfringens) agars have been tested for their suitability to enumerate Clostridium perfringens in naturally contaminated foods. Complete recoveries of C. perfringens were obtained in each of the four media, but only the TSC and EY-free TSC agars were sufficiently selective to ensure subsequent confirmatory tests without interference from facultative anaerobes. Because of some disadvantages associated with the use of egg yolk, EY-free TSC agar is recommended for enumeration of C. perfringens in foods. Several conditions for convenient shipment of foods and C. perfringens isolates with minimum loss of viability have been tested. The highest viable counts were preserved when foods were mixed 1:1 (wt/vol) with 20% glycerol and kept in a container with dry ice. Isolated C. perfringens strains remained viable for at least 2 weeks at ambient temperatures on blood agar slopes with a 2% agar overlay in screw-cap culture tubes. PMID:4363368

  16. [Pulmonary diffusion test to NO and CO time course during thoracic radiotherapy for lung cancer: the CONORT prospective study protocol].

    PubMed

    Zarza, V; Couraud, S; Hassouni, A; Prévost, C; Souquet, P-J; Letanche, G; Hammou, Y; Girard, N; Viart-Ferber, C; Mornex, F

    2014-10-01

    Thoracic radiotherapy is a usual treatment for lung cancer. Early-stages may be treated in stereotactic mode while locally advanced stages are usually treated with conventional radiotherapy mode. Pulmonary function tests show that thoracic irradiation has no impact on lung volume such as forced expiratory volume in one second (FEV1) or forced vital capacity (FCV). However, some studies found that CO (carbon monoxide) diffusing capacity (TLCO) may be altered under thoracic radiotherapy. DLCO alteration is usually symptomatic of either a lesion in the alveolar membrane or a pulmonary capillary alteration. Pulmonary diffusion may be also appreciated by the NO (azote monoxide) diffusion capacity. Moreover, using a double measurement of NO and CO diffusing capacities permit to assess which lung compartment (capillary or membrane) is affected. CONORT is an observational prospective monocentric study, aiming to assess the CO and NO diffusing capacity (as well as other pulmonary function tests) during thoracic radiotherapy. Inclusion criteria are patients with lung cancer, treated by thoracic radiotherapy (conformational or stereotactic), who signed consent. Pulmonary function tests are performed before, during, at the end and six weeks and six months after thoracic irradiation. To estimate a difference of 15% in diffusing capacity test, we have to include 112 patients with a 90% power and a 5% alpha risk. Four months after beginning, 36 patients were included. Preliminary data will be presented at the SFRO meeting. PMID:25205426

  17. Longitudinal change detection in diffusion MRI using multivariate statistical testing on tensors.

    PubMed

    Grigis, Antoine; Noblet, Vincent; Heitz, Fabrice; Blanc, Frédéric; de Sèze, Jérome; Kremer, Stéphane; Rumbach, Lucien; Armspach, Jean-Paul

    2012-05-01

    This paper presents a longitudinal change detection framework for detecting relevant modifications in diffusion MRI, with application to neuromyelitis optica (NMO) and multiple sclerosis (MS). The core problem is to identify image regions that are significantly different between two scans. The proposed method is based on multivariate statistical testing which was initially introduced for tensor population comparison. We use this method in the context of longitudinal change detection by considering several strategies to build sets of tensors characterizing the variability of each voxel. These strategies make use of the variability existing in the diffusion weighted images (thanks to a bootstrap procedure), or in the spatial neighborhood of the considered voxel, or a combination of both. Results on synthetic evolutions and on real data are presented. Interestingly, experiments on NMO patients highlight the ability of the proposed approach to detect changes in the normal-appearing white matter (according to conventional MRI) that are related with physical status outcome. Experiments on MS patients highlight the ability of the proposed approach to detect changes in evolving and non-evolving lesions (according to conventional MRI). These findings might open promising prospects for the follow-up of NMO and MS pathologies. PMID:22387171

  18. Diffusion of test particles in stochastic magnetic fields in the percolative regime

    SciTech Connect

    Neuer, Marcus; Spatschek, Karl H.

    2006-09-15

    For stochastic magnetic flux functions with percolative contours the test particle transport is investigated. The calculations make use of the stochastic Liouville approach. They start from the so-called A-Langevin equations, including stochastic magnetic field components and binary collisions. Using the decorrelation trajectory method, a relation between the Lagrangian velocity correlation function and the Eulerian magnetic field correlation is derived and introduced into the Green-Kubo formalism. Finite Larmor radius effects are included. Interesting results are presented in the percolation regime corresponding to high Kubo numbers. Previous results are found to be limiting cases for small Kubo numbers. For different percolative scenarios the diffusion is analyzed and strong influences of the percolative structures on the transport scaling are found. The finite Larmor radius effects are discussed in detail. Numerical simulations of the A-Langevin equation confirm the semianalytical predictions.

  19. Fly agaric (Amanita muscaria) poisoning, case report and review.

    PubMed

    Satora, Leszek; Pach, Dorota; Butryn, Beata; Hydzik, Piotr; Balicka-Slusarczyk, Barbara

    2005-06-01

    Gathering and eating mushrooms and other plants containing psychoactive substances has become increasingly popular among young people experimenting with drugs. Dried fly agaric Amanita muscaria fruiting bodies were eaten by five young persons (18-21 years of age) at a party in order to evoke hallucinations. Visual and auditory hallucinations occurred in four of them, whereas a 18-year-old girl lost consciousness. The following morning, she went to the Clinic of Toxicology. Due to the fact that not all the active substances present in the fly agaric have been identified, and some of them have an effect after a period of latency, the patient was admitted for several days of observation during which check-up examinations were performed. After four days without any problems, she was discharged. The poisoning regressed with no organ complications. The remaining persons who had eaten the fly agaric were free from any complaints. PMID:15904689

  20. Developing a reference material for diffusion-controlled formaldehyde emissions testing.

    PubMed

    Liu, Zhe; Liu, Xiaoyu; Zhao, Xiaomin; Cox, Steven S; Little, John C

    2013-11-19

    Formaldehyde, a known human carcinogen and mucous membrane irritant, is emitted from a variety of building materials and indoor furnishings. The drive to improve building energy efficiency by decreasing ventilation rates increases the need to better understand emissions from indoor products and to identify and develop lower emitting materials. To help meet this need, formaldehyde emissions from indoor materials are typically measured using environmental chambers. However, chamber testing results are frequently inconsistent and provide little insight into the mechanisms governing emissions. This research addresses these problems by (1) developing a reference formaldehyde emissions source that can be used to validate chamber testing methods for characterization of dynamic sources of formaldehyde emissions and (2) demonstrating that emissions from finite formaldehyde sources can be predicted using a fundamental mass-transfer model. Formaldehyde mass-transfer mechanisms are elucidated, providing practical approaches for developing diffusion-controlled reference materials that mimic actual sources. The fundamental understanding of emissions mechanisms can be used to improve emissions testing and guide future risk reduction actions. PMID:24102115

  1. Testing the U-Th/4He dating method on carbonates I. Helium diffusion

    NASA Astrophysics Data System (ADS)

    Pinti, D. L.; Ghaleb, B. G.; Sano, Y.; Blanchette, S.; Mathouchanh, E.; Takahata, N.

    2012-12-01

    data were plotted on an Arrhenius diagram and the activation energy (E) and the ln(D0/a2) value were determined to be 26.2±3.7 kcal mol-1K-1 and 12.7±3.4 cm2 s-1. These values are in agreement with those of [1] for crinoids (E = 30.0±2.6; ln(D0/a2) = 11±2). Using our values, we estimated a diffusion coefficient for carbonate at ambient temperature (20°C) of 3.16 x 10-19 cm2 s-1. Assuming that all crushed material had an initial spherical shape and applying appropriate diffusion equations, the He fraction lost by the coral in the last 125 ka would be only 1 % of the total amount. Assuming a plane sheet (to better represent the septate structure of the coral) with a thickness ranging from 100 μm to 1 mm, then the He fraction lost could reach 83% of the total, without taking into account the probable loss of He by α recoil through the surface. These calculations suggests that more complex diffusion models need to be developed to test whether He is readily lost from the structure of corals in a short geological timescale. [1] Copeland, P. et al. (2007) Geochim. Cosmochim. Acta 71, 4488-4511. [2] Agosta, S. et al. (2011) GAC-MAC Annual Meeting, Ottawa (abstr.)

  2. Field-scale tests for determining mixing patterns associated with coarse-bubble air diffuser configurations, Egan Quarry, Illinois

    USGS Publications Warehouse

    Hornewer, N.J.; Johnson, G.P.; Robertson, D.M.; Hondzo, Miki

    1997-01-01

    The U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, Chicago District did field-scale tests in August-September 1996 to determine mixing patterns associated with different configurations of coarse-bubble air diffusers. The tests were done in an approximately 13-meter deep quarry near Chicago, Ill. Three-dimensional velocity, water-temperature, dissolved oxygen concentration, and specific-conductivity profiles were collected from locations between approximately 2 to 30 meters from the diffusers for two sets of five test configurations; one set for stratified and one set for destratified conditions in the quarry. The data-collection methods and instrumentation used to characterize mixing patterns and interactions of coarse-bubble diffusers were successful. An extensive data set was collected and is available to calibrate and verify aeration and stratification models, and to characterize basic features of bubble-plume interaction.

  3. Agar gel immunodiffusion assay to detect antibodies to Type A influenza virus.

    PubMed

    Jenson, Terra A

    2014-01-01

    The agar gel immunodiffusion (AGID) test is used to detect antibodies to Type A influenza group-specific antigens, i.e., the ribonucleoprotein (RNP) and matrix (M) proteins. Therefore, this test will detect antibodies to all influenza A virus subtypes. AGID is commonly used to screen poultry flocks for avian influenza virus infection. The AGID is a simple and economical serological test. All serological testing has its advantages and disadvantages which should be considered before choosing the optimal test for the laboratory needs. Each laboratory must evaluate the laboratory's resources, the volume of testing, the goal of testing, how the test results are used and what types of samples are being tested in order to select the optimal test. PMID:24899427

  4. Gas Diffusion Coefficient in Variably Saturated Peat Soil: Development and Tests of Predictive Models

    NASA Astrophysics Data System (ADS)

    Unno, M.; Kawamoto, K.; Moldrup, P.; Komatsu, T.

    2008-12-01

    The soil-gas diffusion coefficient (Dp) and its dependency on air-filled porosity (ɛ) govern gas diffusion and reaction processes in soil. Accurate Dp(ɛ) prediction models for variably saturated peat soils are needed to evaluate vadose zone transport and fate of greenhouse gases such as methane in peaty wetlands. In this study, we measured Dp on undisturbed peat soil samples at different soil-water matric potentials, and developed new, linear and nonlinear expressions for describing and predicting Dp(ɛ). The new Dp(ɛ) models together with existing Dp(ɛ) models were tested against both measured data and independent data sets from literature. Twelve undisturbed 100cm3 peat soil cores were taken between the soil surface and down to 30-cm depth at Bibai wetland, Hokkaido, Japan. The soil cores were initially saturated with water, and drained at given matric potentials, pF=1.0, 1.5, 1.8, 2.0, 3.0, and 4.1 (where pF equals to log | Ψ | , Ψ: the soil-water matric potential in cm H2O), using the hanging water and pressure plate methods. At each matric potential, simultaneous measurements of volume shrinkage, soil-water retention, and Dp were conducted. Literature datasets of Dp(ɛ) for peat soil cores taken from different areas within the same wetland, specifically 12 samples from Iiyama and Hasegawa (2005) and 12 samples from Iiduka et al. (2008), were also used. A total of 191 measurements of Dp(ɛ) at pF ≤ 2.0 were applied for developing new Dp(ɛ) models for pF ≤ 2.0 where effects of shrinkage on Dp were assumed negligible. By modifying 3 existing Dp(ɛ) models, the Buckingham (1904) model, the Macroporosity-Dependent Model (MPD; Moldrup et al., 2000), and the Penman-Call model (Moldrup et al., 2005), we suggested 3 new Dp(ɛ) expressions for peat soil. In the Buckingham-based Dp(ɛ) model, a variable X(ɛ"w relationship (where X is the pore connectivity factor) derived from measurements was introduced in the Dp(ɛ) expression. In the Penman-Call-based Dp

  5. Multi-chamber electroosmosis using textile reinforced agar membranes--A promising concept for the future of hemodialysis.

    PubMed

    Kofler, Markus; Lenninger, Margit; Mayer, Gert; Neuwirt, Hannes; Grimm, Michael; Bechtold, Thomas

    2016-01-20

    Renal replacement therapy options are limited to hemodialysis and peritoneal dialysis (70% of US patients) or renal transplantation. Diffusion processes are the main physico-chemical principle behind hemodialysis. An alternative way to achieve liquid flow through membranes bases on the electroosmotic flow which is observed as electrokinetic phenomenon in porous membranes which bear surface charges. Agar consists of the non-ionic agarose and the negatively charged agaropectine thus an electroosmotic flux is observed in analytical electrophoresis. In this study the potential electroosmosis on textile reinforced agar membranes as separation method was investigated. Using a five-chamber electrolysis cell and an agar membrane/cellulose fabric composite an intensive electroosmotic flow of 1-2 ml cm(2) h(-1) at 100 mA cell current could be observed. The movement of cations in the negatively charged agar structure led to an intensive electroosmotic flux, which also transported uncharged molecules such as urea, glucose through the membrane. Separation of uncharged low molecular weight molecules is determined by the membrane characteristic. The transport of ions (K(+), PO4(3-), creatinine) and uncharged molecules (urea, glucose) in electroosmotic separation experiments was monitored using a pH 5.5 phosphate electrolyte with the aim to assess the overall transport processes in the electrochemical cell. The results demonstrate the potential of the method for filtration of biological fluids in the absence of external pressure or high shear rates. PMID:26572331

  6. Growth kinetics of three species of Tetrahymena on solid agar

    SciTech Connect

    Dobra, K.W.; McArdle, E.W.; Ehret, C.F.

    1980-01-01

    A nutrient-agar method without liquid overlay has been developed for cultivation of ciliates. Three species of Tetrahymena-T. pyriformis strain W, T. rostrata strain UNI, and T. vorax strain V/sub 2/S, representing the 3 main groups of Tetrahymena species, were used; however the method should apply to other ciliates. Growth on the surface of the agar was facilitated by an optimal surface-to-volume ratio yielding a high density of ciliates and short generation times. At the highest density achieved, the cells became irregularly hexagonal and formed a monolayer tissue on the agar. Ciliates grown on agar were like those in liquid culture, typical oral ciliature, food-vacuole formation, and typical cortical patterns being retained. Advantages of this method include high cell density, easy recovery, and optimal O/sub 2/ supply. The organisms can also be cultivated on the surface of sterile cellulose-nitrate filters, facilitating in situ fixation and staining as well as transfer into different media by transfer of filters with cells, without prior centrifugation and resuspension.

  7. Recovery of Sublethally Injured Bacteria Using Selective Agar Overlays.

    ERIC Educational Resources Information Center

    McKillip, John L.

    2001-01-01

    This experiment subjects bacteria in a food sample and an environmental sample to conditions of sublethal stress in order to assess the effectiveness of the agar overlay method to recover sublethally injured cells compared to direct plating onto the appropriate selective medium. (SAH)

  8. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  9. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  10. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  11. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  12. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  13. Improving agar electrospinnability with choline-based deep eutectic solvents

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  14. Isolation and characterization of agar-digesting Vibrio species from the rotten thallus of Gracilariopsis heteroclada Zhang et Xia.

    PubMed

    Martinez, Joval N; Padilla, Philip Ian P

    2016-08-01

    Gracilariopsis heteroclada Zhang et Xia (Gracilariaceae, Rhodophyta) is one of the most studied marine seaweeds due to its economic importance. This has been cultivated extensively on commercial scale in the Philippines and other Asian countries. However, sustainable production of G. heteroclada in the Philippines could not be maximized due to the occurrence of rotten thallus disease. Thus, isolation and characterization of agar-digesting bacteria from the rotten thalli of G. heteroclada was conducted. A total of seven representative bacterial isolates were randomly selected based on their ability to digest agar as evidenced by the formation of depressions around the bacterial colonies on nutrient agar plates supplemented with 1.5% NaCl and liquefaction of agar. Gram-staining and biochemical characterization revealed that isolates tested were gram-negative rods and taxonomically identified as Vibrio parahaemolyticus (86-99.5%) and Vibrio alginolyticus (94.2-97.7%), respectively. It is yet to be confirmed whether these agar-digesting vibrios are involved in the induction and development of rotten thallus disease in G. heteroclada in concomitance with other opportunistic bacterial pathogens coupled with adverse environmental conditions. PMID:27285614

  15. [Interpretation and use of routine pulmonary function tests: Spirometry, static lung volumes, lung diffusion, arterial blood gas, methacholine challenge test and 6-minute walk test].

    PubMed

    Bokov, P; Delclaux, C

    2016-02-01

    Resting pulmonary function tests (PFT) include the assessment of ventilatory capacity: spirometry (forced expiratory flows and mobilisable volumes) and static volume assessment, notably using body plethysmography. Spirometry allows the potential definition of obstructive defect, while static volume assessment allows the potential definition of restrictive defect (decrease in total lung capacity) and thoracic hyperinflation (increase in static volumes). It must be kept in mind that this evaluation is incomplete and that an assessment of ventilatory demand is often warranted, especially when facing dyspnoea: evaluation of arterial blood gas (searching for respiratory insufficiency) and measurement of the transfer coefficient of the lung, allowing with the measurement of alveolar volume to calculate the diffusing capacity of the lung for CO (DLCO: assessment of alveolar-capillary wall and capillary blood volume). All these pulmonary function tests have been the subject of an Americano-European Task force (standardisation of lung function testing) published in 2005, and translated in French in 2007. Interpretative strategies for lung function tests have been recommended, which define abnormal lung function tests using the 5th and 95th percentiles of predicted values (lower and upper limits of normal values). Thus, these recommendations need to be implemented in all pulmonary function test units. A methacholine challenge test will only be performed in the presence of an intermediate pre-test probability for asthma (diagnostic uncertainty), which is an infrequent setting. The most convenient exertional test is the 6-minute walk test that allows the assessment of walking performance, the search for arterial desaturation and the quantification of dyspnoea complaint. PMID:26657268

  16. How do microorganisms influence trace element uptake by plants? Screening in an agar model rhizosphere.

    NASA Astrophysics Data System (ADS)

    Marchetti, M.; Robinson, B. H.; Evangelou, M. W. H.; Vachey, A.; Schwitzguebel, J. P.; Bernier-Latmani, R.; Schulin, R.

    2009-04-01

    Trace elements (TE) are essential for humans and plants, but they may be toxic if their concentration is too high. For this reason, the management of TE in soils is very important. In some cases it may be necessary to increase the uptake of nutrients or TE by plants, for example in a biofortification perspective. Conversely, in some other cases TE uptake by plants should be decreased, for instance to avoid heavy metals entering the food chain via edible crops. Microorganisms living in the rhizosphere affect trace element (TE) uptake by plants. However, due to the complexity of this space and the variety of microorganisms that occur there, it is difficult to isolate the effect of any particular strain. To overcome this hurdle, we developed a system in which we grew plants under sterile conditions in agar and inoculated their rhizosphere with a single, well-defined microbial strain. For many years, agar has been used as a growth substrate for microorganisms and plant tissues. It is cheap, easy to use, and can be autoclaved to ensure its sterility. Because of its widespread use, an experiment conducted using this substrate can be reproduced under the same conditions in any laboratory. In contrast to soil, there is little interaction between the trace elements and the agar matrix. There are many studies investigating the influence of microorganisms on TE uptake by plants. However, so far only a small variety of microorganisms has been tested on few plant species. Therefore, the first objective of our research was to develop a method to rapidly screen a large variety of microorganisms on various plant species. Once this goal was achieved, we sought to study the effect of single, well-defined microbial strains on TE uptake by sunflower and wheat. The substrate for plants growth was a 10% agar solution prepared with modified Hoagland's solution and a TE solution containing 1 mg/kg Pb and molar equivalents of Cu, Ni and Zn. The agar solution was autoclaved and poured into

  17. A Diffusion Limit for a Test Particle in a Random Distribution of Scatterers

    NASA Astrophysics Data System (ADS)

    Basile, G.; Nota, A.; Pulvirenti, M.

    2014-06-01

    We consider a point particle moving in a random distribution of obstacles described by a potential barrier. We show that, in a weak-coupling regime, under a diffusion limit suggested by the potential itself, the probability distribution of the particle converges to the solution of the heat equation. The diffusion coefficient is given by the Green-Kubo formula associated to the generator of the diffusion process dictated by the linear Landau equation.

  18. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus

    PubMed Central

    Cold, Emma R.; Freyria, Nastasia J.; Martínez Martínez, Joaquín; Fernández Robledo, José A.

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham’s F12–5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham’s F12–5% FBS– 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham’s F12–5% FBS– 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications. PMID:27149378

  19. A supplemented soft agar chemotaxis assay demonstrates the Helicobacter pylori chemotactic response to zinc and nickel

    PubMed Central

    Sanders, Lisa; Andermann, Tessa M.

    2013-01-01

    Directed motility, or chemotaxis, is required for Helicobacter pylori to establish infection in the stomach, although the full repertoire of this bacterium’s chemotactic responses is not yet known. Here we report that H. pylori responds to zinc as an attractant and nickel as a repellent. To reach this conclusion, we employed both a temporal chemotaxis assay based on bacterial reversals and a supplemented soft agar spatial assay. We refined the temporal assay using a previously described chemorepellent, acid, and found that H. pylori requires rich media with serum to maintain optimal swimming motility. Surprisingly, we found that some strains respond to acid as an attractant, and that the TlpC chemoreceptor correlated with whether acid was sensed as an attractant or repellent. Using this same assay, we detected weak repellent responses to nickel and copper, and a varied response to zinc. We thus developed an alternative spatial chemotactic assay called the supplemented soft agar assay, which utilizes soft agar medium supplemented with the test compound. With Escherichia coli, the attractant serine slowed overall bacterial migration, while the repellent nickel increased the speed of overall migration. In H. pylori we detected slowed migration with doubled tryptone media, as well as zinc, consistent with an attractant response. In contrast, nickel increased migration, consistent with repulsion. PMID:23139399

  20. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus.

    PubMed

    Cold, Emma R; Freyria, Nastasia J; Martínez Martínez, Joaquín; Fernández Robledo, José A

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham's F12-5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham's F12-5% FBS- 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham's F12-5% FBS- 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications. PMID:27149378

  1. Development and characterisation of an agar--polyvinyl alcohol blend hydrogel.

    PubMed

    Lyons, John G; Geever, Luke M; Nugent, Michael J D; Kennedy, James E; Higginbotham, Clement L

    2009-10-01

    Numerous authors have reported on hydrogel technologies providing products suitable for applications in biomedical, personal care as well as in nano-sensor applications. Hydrogels fabricated from single polymers have been extensively investigated. However, in many cases a single polymer alone cannot meet divergent demands in terms of both properties and performance. In this work, hydrogels were prepared by physically blending the natural polymer agar with polyvinyl alcohol in varying ratios to produce a new biosynthetic polymer applicable for a variety of purposes. Hydrogen bonding was observed to take place between the polyvinyl alcohol and the agar molecules in the composite materials leading to changes in the thermal, mechanical and swelling characteristics of the composite hydrogels. The composite hydrogels exhibited a slightly higher melting temperature than pure agar (116.81 degrees C). Irreversible compressive damage was found to occur at lower strain levels during compression testing of the dehydrated samples consisting of higher PVOH concentrations. Rheological analysis of hydrated sample revealed G' values of between 5000 and 10,000 Pa for the composite blends, with gels containing higher PVOH percentages exhibiting poorer mechanical strength. PMID:19627855

  2. Thermal-induced ageing of agar solutions: impact on the structural and mechanical properties of agar gels

    NASA Astrophysics Data System (ADS)

    Mao, Bosi; Bentaleb, Ahmed; Louerat, Frédéric; Divoux, Thibaut; Snabre, Patrick

    Numerous hydrogels are prepared by cooling down to ambient temperature, aqueous polymer solutions brought to a boil. Although the incubation time of the polymer solution at such a high temperature could be used as a tuning parameter, its impact on the subsequent gelation has been poorly investigated. Here we study the effect of prolonged heating at 80°C on a 1.5% wt solution of agar, a natural polysaccharide. The incubation time is varied from a few hours up to five days. We show that the agar sol. continuously degrades as the result of both the hydrolysis and the intermolecular oxidation of the polymer chains. Furthermore, electronic microscopy and X-ray diffraction experiments reveal that gels formed from older agar sols display an increasingly coarser microstructure composed of micron-sized aggregated pieces of polysaccharides, in contrast with the fibrous-like structure of gels made from fresh sols. Along with structural changes prolonged incubation time leads to weaker gels of lower shear elastic modulus. Finally, macro-indentation experiments coupled to direct visualization show that increasing the incubation time of the agar sol. decreases the yield strain of the gel by a factor of three, while the rupture scenario turns continuously from brittle to ductile-like. Acknowledging funding from BioMérieux & CNRS.

  3. Agar-agar entrapment increases the stability of endo-β-1,4-xylanase for repeated biodegradation of xylan.

    PubMed

    Bibi, Zainab; Shahid, Faiza; Ul Qader, Shah Ali; Aman, Afsheen

    2015-04-01

    Microbial xylanases, specially endo-β-1,4-xylanase catalyzes the hydrolysis of xylan, is considered one of the most significant hydrolases. It has numerous applications but most extensively is utilized in paper and pulp industry as a bio-bleaching agent. Immobilization technique is comprehensively studied with the expectation of modifying and improving enzyme stability and characteristics for commercial purposes. Currently, matrix entrapment technique is applied to immobilize endo-β-1,4-xylanase within agar-agar gel beads produced by Geobacillus stearothermophilus KIBGE-IB29. Maximal enzyme immobilization yield was achieved at 2.5% of agar-agar concentration. Optimized conditions demonstrated an increase in the optimal reaction time from 05 min to 30 min and incubation temperature from 50 °C to 60 °C with reference to free enzyme whereas; no effect was observed for optimum pH. Entrapment technique uniquely changed the kinetic parameters of immobilized endo-β-1,4-xylanase (Km: 0.5074 mg min(-1) to 0.5230 mg min(-1) and Vmax: 4773 U min(-1) to 968 U min(-1)) as compared to free enzyme. However, immobilized enzyme displayed broad thermal stability and retained 79.0% of its initial activity at 80 °C up to 30 min whereas; free enzyme completely lost its activity at this temperature. With respect to economic feasibility, the immobilized enzyme showed impressive recycling efficiency up to six reaction cycles. PMID:25603143

  4. Laboratory Experiments to Evaluate Diffusion of 14C into Nevada Test Site Carbonate Aquifer Matrix

    SciTech Connect

    Ronald L. Hershey; William Howcroft; Paul W. Reimus

    2003-03-01

    Determination of groundwater flow velocities at the Nevada Test Site is important since groundwater is the principal transport medium of underground radionuclides. However, 14C-based groundwater velocities in the carbonate aquifers of the Nevada Test Site are several orders of magnitude slower than velocities derived from the Underground Test Area regional numerical model. This discrepancy has been attributed to the loss or retardation of 14C from groundwater into the surrounding aquifer matrix making 14C-based groundwater ages appear much older. Laboratory experiments were used to investigate the retardation of 14C in the carbonate aquifers at the Nevada Test Site. Three sets of experiments were conducted evaluating the diffusion of 14C into the carbonate aquifer matrix, adsorption and/or isotopic exchange onto the pore surfaces of the carbonate matrix, and adsorption and/or isotopic exchange onto the fracture surfaces of the carbonate aquifer. Experimental results a nd published aquifer matrix and fracture porosities from the Lower Carbonate Aquifer were applied to a 14C retardation model. The model produced an extremely wide range of retardation factors because of the wide range of published aquifer matrix and fracture porosities (over three orders of magnitude). Large retardation factors suggest that groundwater with very little measured 14C activity may actually be very young if matrix porosity is large relative to the fracture porosity. Groundwater samples collected from highly fractured aquifers with large effective fracture porosities may have relatively small correction factors, while samples from aquifers with a few widely spaced fractures may have very large correction factors. These retardation factors were then used to calculate groundwater velocities from a proposed flow path at the Nevada Test Site. The upper end of the range of 14C correction factors estimated groundwater velocities that appear to be at least an order of magnitude too high compared

  5. Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the present paper, we test the suitability of Choline-Cl/urea (DES-U) and Choline-Cl/glycerol (DES-G) eutectic mixtures at 1:2 molar ratios for the production of agar biodegradable films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and s...

  6. Development and evaluation of a novel mucus diffusion test system approved by self-nanoemulsifying drug delivery systems.

    PubMed

    Friedl, Heike; Dünnhaupt, Sarah; Hintzen, Fabian; Waldner, Claudia; Parikh, Shruti; Pearson, Jeffrey P; Wilcox, Matthew D; Bernkop-Schnürch, Andreas

    2013-12-01

    The aim of this study was the development of a novel mucus diffusion model and the approval thereof by self-nanoemulsifying drug delivery systems (SNEDDSs). For diffusion experiments, various SNEDD formulations were developed, spiked with fluorescein diacetate, and evaluated for their mucus diffusion behavior through an intestinal mucus layer within the novel setup. In brief, SNEDD formulations resulting in particle sizes of 12.0 nm produced 70.3% of diffused model drug through the mucus layer. In comparison, SNEDDSs with particle sizes of 455.5 nm led to a permeation of 8.3% only. Apart from this size dependence, two SNEDDS excipients namely Cremophor RH 40 and triacetin were identified to strongly affect the permeation through mucus. Hence, it could be demonstrated that particle size and single excipients can positively influence mucus diffusion of SNEDDSs. Furthermore, it could be shown that the developed mucus diffusion model is a promising tool for pharmaceutical research in comparison with already established systems as it allows an easy handling coupled with the possibility to test different kinds of mucus in parallel within one setup. PMID:24258284

  7. Testing of a Hydrogen Diffusion Flame Array Injector at Gas Turbine Conditions

    SciTech Connect

    Weiland, Nathan T.; Sidwell, Todd G.; Strakey, Peter A.

    2013-07-03

    High-hydrogen gas turbines enable integration of carbon sequestration into coal-gasifying power plants, though NO{sub x} emissions are often high. This work explores nitrogen dilution of hydrogen diffusion flames to reduce thermal NO{sub x} emissions and avoid problems with premixing hydrogen at gas turbine pressures and temperatures. The burner design includes an array of high-velocity coaxial fuel and air injectors, which balances stability and ignition performance, combustor pressure drop, and flame residence time. Testing of this array injector at representative gas turbine conditions (16 atm and 1750 K firing temperature) yields 4.4 ppmv NO{sub x} at 15% O{sub 2} equivalent. NO{sub x} emissions are proportional to flame residence times, though these deviate from expected scaling due to active combustor cooling and merged flame behavior. The results demonstrate that nitrogen dilution in combination with high velocities can provide low NO{sub x} hydrogen combustion at gas turbine conditions, with significant potential for further NO{sub x} reductions via suggested design changes.

  8. Testing the connections within face processing circuitry in Capgras delusion with diffusion imaging tractography

    PubMed Central

    Bobes, Maria A.; Góngora, Daylin; Valdes, Annette; Santos, Yusniel; Acosta, Yanely; Fernandez Garcia, Yuriem; Lage, Agustin; Valdés-Sosa, Mitchell

    2016-01-01

    Although Capgras delusion (CD) patients are capable of recognizing familiar faces, they present a delusional belief that some relatives have been replaced by impostors. CD has been explained as a selective disruption of a pathway processing affective values of familiar faces. To test the integrity of connections within face processing circuitry, diffusion tensor imaging was performed in a CD patient and 10 age-matched controls. Voxel-based morphometry indicated gray matter damage in right frontal areas. Tractography was used to examine two important tracts of the face processing circuitry: the inferior fronto-occipital fasciculus (IFOF) and the inferior longitudinal (ILF). The superior longitudinal fasciculus (SLF) and commissural tracts were also assessed. CD patient did not differ from controls in the commissural fibers, or the SLF. Right and left ILF, and right IFOF were also equivalent to those of controls. However, the left IFOF was significantly reduced respect to controls, also showing a significant dissociation with the ILF, which represents a selective impairment in the fiber-tract connecting occipital and frontal areas. This suggests a possible involvement of the IFOF in affective processing of faces in typical observers and in covert recognition in some cases with prosopagnosia. PMID:26909325

  9. Comparison of dosimetry gels prepared by agar and bovine gelatine

    NASA Astrophysics Data System (ADS)

    Sağsöz, M. E.; Korkut, Ö.; Alemdar, N.; Aktaş, S.; Çalı, E. B.; Kantarcı, M.

    2016-04-01

    Gel dosimeters are unique materials capable of showing three dimensional (3D) dose distributions of therapeutic or diagnostic exposures. Fricke gel dosimeters can be considered as chemical dosimeters that rely on a radiation-induced chemical reaction. Dose distribution of Fricke solutions containing Fe+2 ions determines the transformation of acidic, oxygen saturated Fe+2 ions to Fe+3 ions by the ionizing radiation in aqueous solutions. In this study we produced two different types of gel dosimeters using agar and bovine gelatin with similar fabrication methods. We compared the magnetic resonance (MR) T1 imaging responses of these two gel dosimeters to acquire a dose dependency of MR intensities. In conclusion agar gel dosimeters found to be produced easily and more consistent.

  10. A modified agar plate method for detection of Strongyloides stercoralis.

    PubMed

    Koga, K; Kasuya, S; Khamboonruang, C; Sukhavat, K; Ieda, M; Takatsuka, N; Kita, K; Ohtomo, H

    1991-10-01

    The agar plate method is a new technique with high detection rates for coprological diagnosis of human strongyloidiasis. This report details modifications of the technique and establishes a standardized procedure. We recommend that all plates should be carefully observed using a microscope because macroscopic observation can lead to false negative results. It is also advisable to pour formalin solution directly into microscopically positive dishes to collect worms by sedimentation. This procedure enables one to observe worms otherwise hidden. Sealing dishes with adhesive tape prevents larvae from crawling out of the dishes, eliminating any possibility in the reduction of detection rates, and greatly improves the safety conditions for the technician performing the procedure. We consider the agar plate method to be superior to the filter paper method in detecting Strongyloides, and we believe that it will eventually become the technique of choice. PMID:1951861

  11. Image analysis procedure for studying Back-Diffusion phenomena from low-permeability layers in laboratory tests.

    PubMed

    Tatti, Fabio; Papini, Marco Petrangeli; Raboni, Massimo; Viotti, Paolo

    2016-01-01

    In this study, the long-term tailing derived from the storage process of contaminants in low-permeability zones is investigated. The release from these areas in the groundwater can be considered a long-term source that often undermines remediation efforts. An Image Analysis technique is used to analyze the process and evaluate the concentrations of a tracer at different points of the test section. Furthermore, the diffusive flux from the low-permeability lenses is determined. To validate the proposed technique, the results are compared with samples, and the diffusive fluxes resulting from the low-permeability zones of the reconstructed aquifer are compared with a theoretical approach. PMID:27465129

  12. Image analysis procedure for studying Back-Diffusion phenomena from low-permeability layers in laboratory tests

    NASA Astrophysics Data System (ADS)

    Tatti, Fabio; Papini, Marco Petrangeli; Raboni, Massimo; Viotti, Paolo

    2016-07-01

    In this study, the long-term tailing derived from the storage process of contaminants in low-permeability zones is investigated. The release from these areas in the groundwater can be considered a long-term source that often undermines remediation efforts. An Image Analysis technique is used to analyze the process and evaluate the concentrations of a tracer at different points of the test section. Furthermore, the diffusive flux from the low-permeability lenses is determined. To validate the proposed technique, the results are compared with samples, and the diffusive fluxes resulting from the low-permeability zones of the reconstructed aquifer are compared with a theoretical approach.

  13. Image analysis procedure for studying Back-Diffusion phenomena from low-permeability layers in laboratory tests

    PubMed Central

    Tatti, Fabio; Papini, Marco Petrangeli; Raboni, Massimo; Viotti, Paolo

    2016-01-01

    In this study, the long-term tailing derived from the storage process of contaminants in low-permeability zones is investigated. The release from these areas in the groundwater can be considered a long-term source that often undermines remediation efforts. An Image Analysis technique is used to analyze the process and evaluate the concentrations of a tracer at different points of the test section. Furthermore, the diffusive flux from the low-permeability lenses is determined. To validate the proposed technique, the results are compared with samples, and the diffusive fluxes resulting from the low-permeability zones of the reconstructed aquifer are compared with a theoretical approach. PMID:27465129

  14. Three-dimensional characterization of bacterial microcolonies on solid agar-based culture media.

    PubMed

    Drazek, Laurent; Tournoud, Maud; Derepas, Frédéric; Guicherd, Maryse; Mahé, Pierre; Pinston, Frédéric; Veyrieras, Jean-Baptiste; Chatellier, Sonia

    2015-02-01

    For the last century, in vitro diagnostic process in microbiology has mainly relied on the growth of bacteria on the surface of a solid agar medium. Nevertheless, few studies focused in the past on the dynamics of microcolonies growth on agar surface before 8 to 10h of incubation. In this article, chromatic confocal microscopy has been applied to characterize the early development of a bacterial colony. This technology relies on a differential focusing depth of the white light. It allows one to fully measure the tridimensional shape of microcolonies more quickly than classical confocal microscopy but with the same spatial resolution. Placing the device in an incubator, the method was able to individually track colonies growing on an agar plate, and to follow the evolution of their surface or volume. Using an appropriate statistical modeling framework, for a given microorganism, the doubling time has been estimated for each individual colony, as well as its variability between colonies, both within and between agar plates. A proof of concept led on four bacterial strains of four distinct species demonstrated the feasibility and the interest of the approach. It showed in particular that doubling times derived from early tri-dimensional measurements on microcolonies differed from classical measurements in micro-dilutions based on optical diffusion. Such a precise characterization of the tri-dimensional shape of microcolonies in their late-lag to early-exponential phase could be beneficial in terms of in vitro diagnostics. Indeed, real-time monitoring of the biomass available in a colony could allow to run well established microbial identification workflows like, for instance, MALDI-TOF mass-spectrometry, as soon as a sufficient quantity of material is available, thereby reducing the time needed to provide a diagnostic. Moreover, as done for pre-identification of macro-colonies, morphological indicators such as three-dimensional growth profiles derived from

  15. Impaction onto a Glass Slide or Agar versus Impingement into a Liquid for the Collection and Recovery of Airborne Microorganisms

    PubMed Central

    Juozaitis, Arvydas; Willeke, Klaus; Grinshpun, Sergey A.; Donnelly, Jean

    1994-01-01

    To study impaction versus impingement for the collection and recovery of viable airborne microorganisms, three new bioaerosol samplers have been designed and built. They differ from each other by the medium onto which the bioaerosol particles are collected (glass, agar, and liquid) but have the same inlet and collection geometries and the same sampling flow rate. The bioaerosol concentrations recorded by three different collection techniques have been compared with each other: impaction onto a glass slide, impaction onto an agar medium, and impingement into a liquid. It was found that the particle collection efficiency of agar slide impaction depends on the concentration of agar in the collection medium and on the sampling time, when samples are collected on a nonmoving agar slide. Impingement into a liquid showed anomalous behavior with respect to the sampling flow rate. Optimal sampling conditions in which all three new samplers exhibit the same overall sampling efficiency for nonbiological particles have been established. Inlet and collection efficiencies of about 100% have been achieved for all three devices at a sampling flow rate of 10 liters/min. The new agar slide impactor and the new impinger were then used to study the biological factors affecting the overall sampling efficiency. Laboratory experiments on the total recovery of a typical environmental microorganism, Pseudomonas fluorescens ATCC 13525, showed that both sampling methods, impaction and impingement, provided essentially the same total recovery when relatively nonstressed microorganisms were sampled under optimal sampling conditions. Comparison tests of the newly developed bioaerosol samplers with those commercially available showed that the incorporation of our research findings into the design of the new samplers yields better performance data than data from currently available samplers. PMID:16349217

  16. Comparison of diffuse sky irradiance calculation methods and effect on surface reflectance retrieval from an automated radiometric calibration test site

    NASA Astrophysics Data System (ADS)

    Leisso, Nathan; Czapla-Myers, Jeffrey

    2011-10-01

    The Remote Sensing Group (RSG) at the University of Arizona is currently refining an automated system for the absolute radiometric calibration of earth-observing sensors. The Radiometric Calibration Test Site (RadCaTS) relies on semi-permanent instrumentation at the Railroad Valley (RRV) test site to collect data from which surface reflectance and an atmospheric characterization is determined. Multispectral surface reflectance is determined from calibrated ground viewing radiometers and assimilated to determine the hyperspectral reflectance used in radiative transfer calculations. The reflectance retrieval algorithm relies on an accurate determination of the diffuse sky irradiance for the time of interest. Currently, diffuse sky irradiance is modeled using the atmospheric characterization as input into MODTRAN5. This work investigates the accuracy of the diffuse sky modeling by comparing modeled results to measurements made at the test site. Diffuse sky irradiance from several alternative methods are also presented. Surface reflectance is computed and compared to in-situ measurements taken with a portable spectoradiometer.

  17. Mupirocin-mucin agar for selective enumeration of Bifidobacterium bifidum.

    PubMed

    Pechar, Radko; Rada, Vojtech; Parafati, Lucia; Musilova, Sarka; Bunesova, Vera; Vlkova, Eva; Killer, Jiri; Mrazek, Jakub; Kmet, Vladimir; Svejstil, Roman

    2014-11-17

    Bifidobacterium bifidum is a bacterial species exclusively found in the human intestinal tract. This species is becoming increasingly popular as a probiotic organism added to lyophilized products. In this study, porcine mucin was used as the sole carbon source for the selective enumeration of B. bifidum in probiotic food additives. Thirty-six bifidobacterial strains were cultivated in broth with mucin. Only 13 strains of B. bifidum utilized the mucin to produce acids. B. bifidum was selectively enumerated in eight probiotic food supplements using agar (MM agar) containing mupirocin (100 mg/L) and mucin (20 g/L) as the sole carbon source. MM agar was fully selective if the B. bifidum species was presented together with Bifidobacterium animalis subsp. lactis, Bifidobacterium breve, and Bifidobacterium longum subsp. longum species and with lactic acid bacteria (lactobacilli, streptococci). Isolated strains of B. bifidum were identified using biochemical, PCR, MALDI-TOF procedures and 16S rRNA gene sequencing. The novel selective medium was also suitable for the isolation of B. bifidum strains from human fecal samples. PMID:25217723

  18. Diffusion tests of mercury through concrete, bentonite-enhanced sand and sand.

    PubMed

    Svensson, Margareta; Allard, Bert

    2007-04-01

    The transport by diffusion of Hg(II) and Hg(0) through a barrier of concrete or bentonite-enhanced sand was examined under aerobic conditions. Sand was used as a reference system parallel to the two systems. Speciation of mercury was performed with a purge and trap method, where dissolved Hg(0) was purged with nitrogen gas from the sample, through a trap for volatile oxidized mercury species and finally trapped in an oxidative solution. The apparent diffusion coefficient (from Fick's second law of diffusion) for oxidized mercury was 1 x 10(-14)m(2)/s in Standard Portland concrete and 4 x 10(-13)m(2)/s in quartz sand. The diffusion of Hg(0) seemed to be faster than for Hg(II), Hg(0) was however oxidized to Hg(II) under aerobic conditions, and after 45 months only 1-10% of the total mercury concentration was Hg(0). PMID:17097806

  19. Test-retest reliability of white matter structural brain networks: a multiband diffusion MRI study

    PubMed Central

    Zhao, Tengda; Duan, Fei; Liao, Xuhong; Dai, Zhengjia; Cao, Miao; He, Yong; Shu, Ni

    2015-01-01

    The multiband EPI sequence has been developed for the human connectome project to accelerate MRI data acquisition. However, no study has yet investigated the test-retest (TRT) reliability of the graph metrics of white matter (WM) structural brain networks constructed from this new sequence. Here, we employed a multiband diffusion MRI (dMRI) dataset with repeated scanning sessions and constructed both low- and high-resolution WM networks by volume- and surface-based parcellation methods. The reproducibility of network metrics and its dependence on type of construction procedures was assessed by the intra-class correlation coefficient (ICC). We observed conserved topological architecture of WM structural networks constructed from the multiband dMRI data as previous findings from conventional dMRI. For the global network properties, the first order metrics were more reliable than second order metrics. Between two parcellation methods, networks with volume-based parcellation showed better reliability than surface-based parcellation, especially for the global metrics. Between different resolutions, the high-resolution network exhibited higher TRT performance than the low-resolution in terms of the global metrics with a large effect size, whereas the low-resolution performs better in terms of local (region and connection) properties with a relatively low effect size. Moreover, we identified that the association and primary cortices showed higher reproducibility than the paralimbic/limbic regions. The important hub regions and rich-club connections are more reliable than the non-hub regions and connections. Finally, we found WM networks from the multiband dMRI showed higher reproducibility compared with those from the conventional dMRI. Together, our results demonstrated the fair to good reliability of the WM structural brain networks from the multiband EPI sequence, suggesting its potential utility for exploring individual differences and for clinical applications. PMID

  20. Simple Stellar Population Modeling of Quasar Host Galaxies with Diffusion K-Means Test Results

    NASA Astrophysics Data System (ADS)

    Mosby, Gregory; Moravec, E. A.; Tremonti, C. A.; Wolf, M. J.

    2013-01-01

    In the last decade, the correlation of the masses of supermassive black holes (SMBHs) and their host galaxy stellar spheroid velocity dispersions (the M-sigma relation) was greeted as clear evidence for the co-evolution of host galaxies and their SMBHs. However, studies in the last five years have posited that this relation could arise from central-limit properties of hierarchical formation alone. To address the question of whether and how often the SMBHs evolve with their host galaxies, it is necessary to look at galaxies whose SMBHs are actively growing—quasars—and determine the host galaxy properties. The central nuclei of quasar host galaxies complicate this type of study because their high luminosity tends to wash out their host galaxies. But, by using 3-D spectroscopy with the integral field unit (IFU) Sparsepak on the WIYN telescope, we have shown that the quasar light can be mostly isolated to one fiber in order to obtain the spectra of the quasar and the host galaxy concurrently. We can then model simultaneously the scattered quasar light and the stellar populations in the host galaxy fiber using a new simple stellar population (SSP) modeling method called diffusion k-means (DFK). The objectives of the research presented in this poster are to model synthetic quasar host galaxies using a DFK basis and a more traditional basis, compare the accuracy of both modeling methods, and test the affects of various prescriptions for masking the quasar lines in the host galaxy fiber. We present results from our SSP modeling and Markov Chain Monte Carlo (MCMC) results for DFK and traditional modeling schemes using synthetic data. By determining and then using the more robust stellar population modeling method, we can more confidently study quasar host galaxies to answer remaining questions in galaxy evolution. This work was partially supported by a National Science Foundation Graduate Fellowship (NSF Grant DGE-0718123) and through the NSF's REU program (NSF Award

  1. Evaluating real-time image reconstruction in diffuse optical tomography using physiologically realistic test data

    PubMed Central

    Brigadoi, Sabrina; Powell, Samuel; Cooper, Robert J.; Dempsey, Laura A.; Arridge, Simon; Everdell, Nick; Hebden, Jeremy; Gibson, Adam P.

    2015-01-01

    In diffuse optical tomography (DOT), real-time image reconstruction of oxy- and deoxy-haemoglobin changes occurring in the brain could give valuable information in clinical care settings. Although non-linear reconstruction techniques could provide more accurate results, their computational burden makes them unsuitable for real-time applications. Linear techniques can be employed under the assumption that the expected change in absorption is small. Several approaches exist, differing primarily in their handling of regularization and the noise statistics. In real experiments, it is impossible to compute the true noise statistics, because of the presence of physiological oscillations in the measured data. This is even more critical in real-time applications, where no off-line filtering and averaging can be performed to reduce the noise level. Therefore, many studies substitute the noise covariance matrix with the identity matrix. In this paper, we examined two questions: does using the noise model with realistic, imperfect data yield an improvement in image quality compared to using the identity matrix; and what is the difference in quality between online and offline reconstructions. Bespoke test data were created using a novel process through which simulated changes in absorption were added to real resting-state DOT data. A realistic multi-layer head model was used as the geometry for the reconstruction. Results validated our assumptions, highlighting the validity of computing the noise statistics from the measured data for online image reconstruction, which was performed at 2 Hz. Our results can be directly extended to a real application where real-time imaging is required. PMID:26713189

  2. The distributed-order fractional diffusion-wave equation of groundwater flow: Theory and application to pumping and slug tests

    NASA Astrophysics Data System (ADS)

    Su, Ninghu; Nelson, Paul N.; Connor, Sarah

    2015-10-01

    We present a distributed-order fractional diffusion-wave equation (dofDWE) to describe radial groundwater flow to or from a well, and three sets of solutions of the dofDWE for flow from a well for aquifer tests: one for pumping tests, and two for slug tests. The dofDWE is featured by two temporal orders of fractional derivatives, β1 and β2, which characterise small and large pores, respectively. By fitting the approximate solutions of the dofDWE to data from slug tests in the field, we determined the effective saturated hydraulic conductivity, Ke, transmissivity, Tf, and the order of fractional derivatives, β2 in one test and β2 and β1 in the second test. We found that the patterns of groundwater flow from a well during the slug tests at this site belong to the class of sub-diffusion with β2 < 1 and β1 < 1 using both the short-time and large-time solutions. We introduce the concept of the critical time to link Ke as a function of β2 and β1. The importance of the orders of fractional derivatives is obvious in the approximate solutions: for short time slug tests only the parameter β2 for flow in large pores is present while for long time slug tests the parameters β2 and β1 are present indicating both large and small pores are functioning.

  3. Molecular Diffusion Coefficients: Experimental Determination and Demonstration.

    ERIC Educational Resources Information Center

    Fate, Gwendolyn; Lynn, David G.

    1990-01-01

    Presented are laboratory methods which allow the demonstration and determination of the diffusion coefficients of compounds ranging in size from water to small proteins. Included are the procedures involving the use of a spectrometer, UV cell, triterated agar, and oxygen diffusion. Results including quantification are described. (CW)

  4. Gas Diffusion Barriers Using Atomic Layer Deposition: A New Calcium Test and Polymer Substrate Effects

    NASA Astrophysics Data System (ADS)

    Bertrand, Jacob Andrew

    The increasing demand on available energy resources has led to a desire for more energy efficient devices. The wide use of displays in consumer electronics, such as televisions, cell phones, cameras and computers makes them an ideal target for improvement. Organic light-emitting diodes (OLEDs) are a good candidate to replace traditional Si based devices. However, the low work function metals typically used as electrodes in OLEDs are very reactive with water and oxygen. Ultralow permeability gas diffusion barriers with water vapor transmission rates (WVTRs) as low as <10-6g/(m2*day) are required on the polymers used to fabricate organic electronic and thin film photovoltaic devices. Atomic Layer Deposition (ALD) uses self-limiting surface reactions to deposit thin conformal films. ALD is capable of depositing thin, conformal, high quality barriers. WVTR values as low as ˜5 x 10-5 g/(m2*day) have been measured for Al2O3 ALD films at 38 °C/85% RH using the Ca test with optical transmission probing. The Ca test is a technique with very high sensitivity to measure ultralow WVTRs. This test relies on measuring the oxidation of a Ca metal film by monitoring the change in its optical or electrical properties. However, glass lid control experiments have indicated that the WVTRs measured by the Ca test are limited by H2O permeability through the epoxy seals. Varying results have been reported in the literature using the electrical conductance of Ca to measure permeation. In this work, two approaches were applied to overcome the epoxy edge seal limitations. The first approach was to deposit Al2O 3 ALD barriers directly on Ca metal. While the Al 2O3 ALD barriers were successfully deposited, the measurement of an accurate WVTR was limited by barrier pinholes. The presence of pinholes in the Al2O3 ALD barrier on Ca results in the localized oxidation of the Ca sensor. Heterogeneous degradation of the Ca causes inaccuracies in the conductance of the film. As oxidation regions

  5. Utilization of the Soft Agar Colony Formation Assay to Identify Inhibitors of Tumorigenicity in Breast Cancer Cells.

    PubMed

    Horibata, Sachi; Vo, Tommy V; Subramanian, Venkataraman; Thompson, Paul R; Coonrod, Scott A

    2015-01-01

    Given the inherent difficulties in investigating the mechanisms of tumor progression in vivo, cell-based assays such as the soft agar colony formation assay (hereafter called soft agar assay), which measures the ability of cells to proliferate in semi-solid matrices, remain a hallmark of cancer research. A key advantage of this technique over conventional 2D monolayer or 3D spheroid cell culture assays is the close mimicry of the 3D cellular environment to that seen in vivo. Importantly, the soft agar assay also provides an ideal tool to rigorously test the effects of novel compounds or treatment conditions on cell proliferation and migration. Additionally, this assay enables the quantitative assessment of cell transformation potential within the context of genetic perturbations. We recently identified peptidylarginine deiminase 2 (PADI2) as a potential breast cancer biomarker and therapeutic target. Here we highlight the utility of the soft agar assay for preclinical anti-cancer studies by testing the effects of the PADI inhibitor, BB-Cl-amidine (BB-CLA), on the tumorigenicity of human ductal carcinoma in situ (MCF10DCIS) cells. PMID:26067809

  6. Design, Construction and Testing of Annular Diffusers for High Speed Civil Transportation Combustor Applications

    NASA Technical Reports Server (NTRS)

    Okhio, Cyril B.

    1996-01-01

    A theoretical and an experimental design study of subsonic flow through curved-wall annular diffusers has been initiated under this award in order to establish the most pertinent design parameters and hence performance characteristics for such devices, an the implications of their application in the design of engine components in the aerospace industries. The diffusers under this study are expected to contain appreciable regions of stall and the effects of swirl on their performance are being studied. The experimental work involves the application of Computer Aided Design software tool to the development of a suitable annular diffuse geometry and the subsequent downloading of such data to a CNC machine at Central State University (CSU). Two experimental run segments have been completed so far during FY-95 involving flow visualization and diffuser performance evaluation based on Kinetic Energy Dissipation. The method of calculation of the performance of diffusers based on pressure recovery coefficient has been shown to have some shortcomings and so the kinetic energy dissipation approach has been introduced in the run segment two with some success. The application of the discretized, full Navier Stokes and Continuity equations to the numerical study of the problem described above for the time-mean flow is expected to follow. Various models of turbulence are being evaluated for adoption throughout the study and comparisons would be made with experimental data where they exist. Assessment of diffuser performance based on the dissipated mechanical energy would also be made. The result of the investigations are expected to indicate that more cost effective component design of such devices as diffusers which normally contain complex flows can still be achieved.

  7. Computational Analyses in Support of Sub-scale Diffuser Testing for the A-3 Facility. Part 1; Steady Predictions

    NASA Technical Reports Server (NTRS)

    Allgood, Daniel C.; Graham, Jason S.; Ahuja, Vineet; Hosangadi, Ashvin

    2008-01-01

    Simulation technology can play an important role in rocket engine test facility design and development by assessing risks, providing analysis of dynamic pressure and thermal loads, identifying failure modes and predicting anomalous behavior of critical systems. Advanced numerical tools assume greater significance in supporting testing and design of high altitude testing facilities and plume induced testing environments of high thrust engines because of the greater inter-dependence and synergy in the functioning of the different sub-systems. This is especially true for facilities such as the proposed A-3 facility at NASA SSC because of a challenging operating envelope linked to variable throttle conditions at relatively low chamber pressures. Facility designs in this case will require a complex network of diffuser ducts, steam ejector trains, fast operating valves, cooling water systems and flow diverters that need to be characterized for steady state performance. In this paper, we will demonstrate with the use of CFD analyses s advanced capability to evaluate supersonic diffuser and steam ejector performance in a sub-scale A-3 facility at NASA Stennis Space Center (SSC) where extensive testing was performed. Furthermore, the focus in this paper relates to modeling of critical sub-systems and components used in facilities such as the A-3 facility. The work here will address deficiencies in empirical models and current CFD analyses that are used for design of supersonic diffusers/turning vanes/ejectors as well as analyses for confined plumes and venting processes. The primary areas that will be addressed are: (1) supersonic diffuser performance including analyses of thermal loads (2) accurate shock capturing in the diffuser duct; (3) effect of turning duct on the performance of the facility (4) prediction of mass flow rates and performance classification for steam ejectors (5) comparisons with test data from sub-scale diffuser testing and assessment of confidence

  8. Computational Analyses in Support of Sub-scale Diffuser Testing for the A-3 Facility. Part 1; Steady Predictions

    NASA Technical Reports Server (NTRS)

    Allgood, Daniel C.; Graham, Jason S.; Ahuja, Vineet; Hosangadi, Ashvin

    2010-01-01

    Simulation technology can play an important role in rocket engine test facility design and development by assessing risks, providing analysis of dynamic pressure and thermal loads, identifying failure modes and predicting anomalous behavior of critical systems. Advanced numerical tools assume greater significance in supporting testing and design of high altitude testing facilities and plume induced testing environments of high thrust engines because of the greater inter-dependence and synergy in the functioning of the different sub-systems. This is especially true for facilities such as the proposed A-3 facility at NASA SSC because of a challenging operating envelope linked to variable throttle conditions at relatively low chamber pressures. Facility designs in this case will require a complex network of diffuser ducts, steam ejector trains, fast operating valves, cooling water systems and flow diverters that need to be characterized for steady state performance. In this paper, we will demonstrate with the use of CFD analyses s advanced capability to evaluate supersonic diffuser and steam ejector performance in a sub-scale A-3 facility at NASA Stennis Space Center (SSC) where extensive testing was performed. Furthermore, the focus in this paper relates to modeling of critical sub-systems and components used in facilities such as the A-3 facility. The work here will address deficiencies in empirical models and current CFD analyses that are used for design of supersonic diffusers/turning vanes/ejectors as well as analyses for confined plumes and venting processes. The primary areas that will be addressed are: (1) supersonic diffuser performance including analyses of thermal loads (2) accurate shock capturing in the diffuser duct; (3) effect of turning duct on the performance of the facility (4) prediction of mass flow rates and performance classification for steam ejectors (5) comparisons with test data from sub-scale diffuser testing and assessment of confidence

  9. How do microorganisms influence trace element uptake by plants? Screening in an agar model rhizosphere.

    NASA Astrophysics Data System (ADS)

    Marchetti, M.; Robinson, B. H.; Evangelou, M. W. H.; Vachey, A.; Schwitzguebel, J. P.; Bernier-Latmani, R.; Schulin, R.

    2009-04-01

    Trace elements (TE) are essential for humans and plants, but they may be toxic if their concentration is too high. For this reason, the management of TE in soils is very important. In some cases it may be necessary to increase the uptake of nutrients or TE by plants, for example in a biofortification perspective. Conversely, in some other cases TE uptake by plants should be decreased, for instance to avoid heavy metals entering the food chain via edible crops. Microorganisms living in the rhizosphere affect trace element (TE) uptake by plants. However, due to the complexity of this space and the variety of microorganisms that occur there, it is difficult to isolate the effect of any particular strain. To overcome this hurdle, we developed a system in which we grew plants under sterile conditions in agar and inoculated their rhizosphere with a single, well-defined microbial strain. For many years, agar has been used as a growth substrate for microorganisms and plant tissues. It is cheap, easy to use, and can be autoclaved to ensure its sterility. Because of its widespread use, an experiment conducted using this substrate can be reproduced under the same conditions in any laboratory. In contrast to soil, there is little interaction between the trace elements and the agar matrix. There are many studies investigating the influence of microorganisms on TE uptake by plants. However, so far only a small variety of microorganisms has been tested on few plant species. Therefore, the first objective of our research was to develop a method to rapidly screen a large variety of microorganisms on various plant species. Once this goal was achieved, we sought to study the effect of single, well-defined microbial strains on TE uptake by sunflower and wheat. The substrate for plants growth was a 10% agar solution prepared with modified Hoagland's solution and a TE solution containing 1 mg/kg Pb and molar equivalents of Cu, Ni and Zn. The agar solution was autoclaved and poured into

  10. Comparison of eight different agars for the recovery of clinically relevant non-O157 Shiga toxin-producing Escherichia coli from baby spinach, cilantro, alfalfa sprouts and raw milk.

    PubMed

    Kase, Julie A; Maounounen-Laasri, Anna; Son, Insook; Lin, Andrew; Hammack, Thomas S

    2015-04-01

    The FDA Bacteriological Analytical Manual (BAM) Chapter 4a recommends several agars for isolating non-O157 Shiga toxin-producing Escherichia coli (STEC); not all have been thoroughly tested for recovering STECs from food. Using E. coli strains representing ten clinically relevant O serogroups (O26, O45, O91, O103, O104, O111, O113, O121, O128, O145) in artificially-contaminated fresh produce--bagged baby spinach, alfalfa sprouts, cilantro, and raw milk--we evaluated the performance of 8 different agars. Performance was highly dependent upon strain used and the presence of inhibitors, but not necessarily dependent on food matrix. Tellurite resistant-negative strains, O91:-, O103:H6, O104:H21, O113:H21, and O128, grew poorly on CHROMagar STEC, Rainbow agar O157, and a modified Rainbow O157 (mRB) agar. Although adding washed sheep's blood to CHROMagar STEC and mRB agars improved overall performance; however, this also reversed the inhibition of non-target bacteria provided by original formulations. Variable colony coloration made selecting colonies from Rainbow agar O157 and mRB agars difficult. Study results support a strategy using inclusive agars (e.g. L-EMB, SHIBAM) in combination with selective agars (R & F E. coli O157:H7, CHROMagar STEC) to allow for recovery of the most STECs while increasing the probability of recovering STEC in high bacterial count matrices. PMID:25475297

  11. Locating and characterizing a crack in concrete with diffuse ultrasound: A four-point bending test.

    PubMed

    Larose, Eric; Obermann, Anne; Digulescu, Angela; Planès, Thomas; Chaix, Jean-Francois; Mazerolle, Frédéric; Moreau, Gautier

    2015-07-01

    This paper describes an original imaging technique, named Locadiff, that benefits from the diffuse effect of ultrasound waves in concrete to detect and locate mechanical changes associated with the opening of pre-existing cracks, and/or to the development of diffuse damage at the tip of the crack. After giving a brief overview of the theoretical model to describe the decorrelation of diffuse waveforms induced by a local change, the article introduces the inversion procedure that produces the three dimensional maps of density of changes. These maps are interpreted in terms of mechanical changes, fracture opening, and damage development. In addition, each fracture is characterized by its effective scattering cross section. PMID:26233022

  12. Differential recovery of Streptococcus mutans from various mitis-salivarius agar preparations.

    PubMed Central

    Liljemark, W F; Okrent, D H; Bloomquist, C G

    1976-01-01

    Recoveries of Streptococcus mutans from human dental plaque were lower when plated on mitis-salivarius agar obtained from Baltimore Biological Laboratories as compared with mitis-salivarius agar obtained from Difco Laboratories. However, no difference in recoveries of established laboratory strains of S. mutans was observed between these two agar preparations. PMID:956358

  13. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In this work, we report the successful fabrication of agar-based nanofibers by an electrospinning technique using water as the solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operated at 50 deg C, to avoid agar gelation. Pure agar solution 1% (w/w) showed inadequ...

  14. MRI Phantoms – Are There Alternatives to Agar?

    PubMed Central

    Hellerbach, Alexandra; Schuster, Verena; Jansen, Andreas; Sommer, Jens

    2013-01-01

    The suitability of different gelling agents as MRI phantoms was evaluated in terms of homogeneity, gel stability and reproducibility. Time and effort for preparation were also taken into account. The relaxation times of various gel compositions were estimated. Carbomer-980 and Carbopol-974P were determined to be promising novel phantom materials. These gelling agents are readily available, inexpensive and easy to handle given that thermal treatment is not required. Furthermore, the viscoelasticity of their polymer network is pH-dependent. With such characteristics, it was even possible to embed sensitive objects and retrieve them after testing. This was demonstrated with a fiber phantom for Diffusion Weighted MRI applications. Since Carbomer-980 and Carbopol-974P are non-hazardous, they are also suitable for multimodal setups (e.g., MRI as well as ultrasonic imaging). PMID:23940563

  15. Mechanical and water barrier properties of agar/κ-carrageenan/konjac glucomannan ternary blend biohydrogel films.

    PubMed

    Rhim, Jong-Whan; Wang, Long-Feng

    2013-07-01

    Multicomponent hydrogel films composed of agar, κ-carrageenan, konjac glucomannan powder, and nanoclay (Cloisite(®) 30B) were prepared and their mechanical and water barrier properties such as water vapor permeability (WVP), water contact angle (CA), water solubility (WS), water uptake ratio (WUR), water vapor uptake ratio (WVUR) were determined. Mechanical, water vapor barrier, and water resistance properties of the ternary blend film exhibited middle range of individual component films, however, they increased significantly after formation of nanocomposite with the clay. Especially, the water holding capacity of the ternary blend biopolymer films increased tremendously, from 800% to 1681% of WUR for agar and κ-carrageenan films up to 5118% and 5488% of WUR for the ternary blend and ternary blend nanocomposite films, respectively. Water vapor adsorption behavior of films was also tested by water vapor adsorption kinetics and water vapor adsorption isotherms test. Preliminary test result for fresh spinach packaging revealed that the ternary blend biohydrogel films had a high potential for the use as an antifogging film for packaging highly respiring agricultural produce. In addition, the ternary blend nanocomposite film showed an antimicrobial activity against Gram-positive bacteria, Listeria monocytogenes. PMID:23688456

  16. Reliability tests of electroless barriers against copper diffusion under bias-temperature stress with n- and p-type substrates

    NASA Astrophysics Data System (ADS)

    Ueno, Kazuyoshi; Fujishima, Shota; Yamashita, Makoto; Mitsumori, Akiyoshi

    2016-05-01

    To investigate the similarity and difference of substrate conduction type in the time-dependent dielectric breakdown (TDDB) tests for the barrier integrity against Cu diffusion under bias-temperature stress (BTS), the TDDB reliability of electroless NiB and CoWP/NiB was determined by metal oxide semiconductor (MOS) structures on n-type Si (n-Si) substrates, and the test results were compared with those using p-type Si (p-Si) substrates. The TDDB results and mechanism were observed to be qualitatively the same as Cu diffusion for both conduction types. However, the TDDB lifetime using p-Si was found to be potentially shorter because of the reverse bias conditions than that using n-Si under the forward bias conditions.

  17. Quality control guidelines for disk diffusion and broth microdilution antimicrobial susceptibility tests with seven drugs for veterinary applications.

    PubMed

    Odland, B A; Erwin, M E; Jones, R N

    2000-01-01

    This multicenter study proposes antimicrobial susceptibility (MIC and disk diffusion methods) quality control (QC) parameters for seven compounds utilized in veterinary health. Alexomycin, apramycin, tiamulin, tilmicosin, and tylosin were tested by broth microdilution against various National Committee for Clinical Laboratory Standards (NCCLS)-recommended QC organisms (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 29212, Streptococcus pneumoniae ATCC 49619, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853). In addition, disk diffusion zone diameter QC limits were determined for apramycin, enrofloxacin, and premafloxacin by using E. coli ATCC 25922, P. aeruginosa ATCC 27853, and S. aureus ATCC 25923. The results from five or six participating laboratories produced >/=99.0% of MICs and >/=95.0% of the zone diameters within suggested guidelines. The NCCLS Subcommittee for Veterinary Antimicrobial Susceptibility Testing has recently approved these ranges for publication in the next M31 document. PMID:10618141

  18. Diffuse reflectance spectroscopy: a clinical study of tuberculin skin tests reading

    NASA Astrophysics Data System (ADS)

    Koenig, Anne; Grande, Sophie; Dahel, Karima; Planat-Chrétien, Anne; Poher, Vincent; Goujon, Catherine; Dinten, Jean-Marc

    2013-02-01

    Diffuse reflectance spectroscopy is a technique widely used to determine optical properties of tissues: scattering and absorption coefficients. In this study, we present the development of a low-cost optical instrument usable in a clinical environment based upon the spatially resolved diffuse reflectance spectroscopy approach. This instrument has been used in a clinical study to support the diagnosis of tuberculosis. The idea is to establish a new scanning method for an early detection of inflammation due to a reagent injection, before the onset of visual signs. Results comparing the instrumental and classical clinical readings are presented.

  19. Reaction-diffusion patterns: From observations in halogene chemistry to a test for implication in mitosis

    NASA Astrophysics Data System (ADS)

    Dulos, E.; Hunding, A.; Boissonade, J.; de Kepper, P.

    Since the seminal paper "The chemical basis of morphogenesis" by Alan Turing, the temporal and spatial self-organization phenomena produced in chemically reacting and diffusing systems are often thought as paradigms for biological development. The basic theoretical principles on which the development of stationary concentration patterns (Turing structures) rely on are briefly presented. We review different aspects of our contribution to the experimental observation of reaction-diffusion patterns in iodine-oxychlorine systems. The experimental techniques are emphasized. Phase diagrams gathering different standing and travelling patterns are presented, analyzed and modeled. A special attention is also given to some peculiar pattern growth dynamics (spot division, finger splitting).

  20. Analysis of Tracer Tests with Multirate Diffusion Models: Recent Results and Future Directions within the WIPP Project

    SciTech Connect

    ALTMAN, SUSAN J.; HAGGERTY, ROY; MCKENNA, SEAN A.; MEIGS, LUCY C.

    1999-10-01

    A series of single-well injection-withdrawal (SWIW) and two-well convergent-flow (TWCF) tracer tests were conducted in the Culebra dolomite at the WIPP site in late 1995 and early 1996. Modeling analyses over the past year have focused on reproducing the observed mass-recovery curves and understanding the basic physical processes controlling tracer transport in SWIW and TWCF tests. To date, specific modeling efforts have focused on five SWIW tests and one TWCF pathway at each of two different locations (H-11 and H-19 hydropads). An inverse parameter-estimation procedure was implemented to model the SWIW and TWCF tests with both traditional and multirate double-porosity formulations. The traditional model assumes a single diffusion rate while the multirate model uses a first-order approximation to model a continuous distribution of diffusion coefficients. Conceptually, the multirate model represents variable matrix block sizes within the Culebra as observed in geologic investigations and also variability in diffusion rates within the matrix blocks as observed with X-ray imaging in the laboratory. Single-rate double-porosity models cannot provide an adequate match to the SWIW data. Multirate double-porosity models provide excellent fits to all five SWIW mass-recovery curves. Models of the TWCF tests show that, at one location, the tracer test can be modeled with both single-rate and multirate double-porosity models. At the other location, only the multi-rate double-porosity model is capable of explaining the test results.

  1. Culture of Piscirickettsia salmonis on enriched blood agar.

    PubMed

    Mauel, Michael J; Ware, Cynthia; Smith, Pedro A

    2008-03-01

    Piscirickettsia salmonis is the etiologic agent of piscirickettsiosis, an economically significant disease of fish. Isolation of P. salmonis by culturing on fish cell lines has been the standard technique since the initial isolation of the organism. The ability to grow P. salmonis on artificial media would relieve facilities of the cost of maintaining cell lines, permit isolation at fish culture sites with fewer contamination problems, and allow easier transport of isolates to diagnostic facilities for confirmation assays. This report describes the successful culture of P. salmonis on enriched blood agar. PMID:18319435

  2. Agar-Gel Precipitin Technique in Anthrax Antibody Determinations1

    PubMed Central

    Ray, John G.; Kadull, Paul J.

    1964-01-01

    A modification of the agar-gel precipitation inhibition technique of Thorne and Belton for detecting anthrax antibodies reduces inconsistency of visually determined end points on the same sera observed by different technicians. Determination of the minimal reacting concentrations of the anthrax antigen and antibody reagents, modifications of the visualization apparatus, methods for combining reagents, and length of incubation periods contribute to the ease of the end-point determinations and the uniformity of results. When compared with the previous technique, the modified procedure is less time-consuming while retaining satisfactory reproducibility, simplicity, specificity, and sensitivity. Images FIG. 1 FIG. 2 PMID:14201088

  3. Weak localization as a definitive test of diffusive models in the Casimir effect

    NASA Astrophysics Data System (ADS)

    Allocca, Andrew; Wilson, Justin; Galitski, Victor

    2015-03-01

    Results from many measurements of the Casimir effect suggest that the metallic plates in these experiments should be modeled with the plasma model of free electrons as opposed to the naive diffusive Drude model, while other experiments seem to indicate the exact opposite, with results more in line with a diffusive model. We study the Casimir effect at low temperatures between a thick disordered plate and purely two-dimensional disordered system where the Drude conductivity decreases logarithmically at low temperatures due to weak localization. This effect can be tuned with either temperature or applied magnetic field leading to a measurable change in the Casimir force. On the other hand, a ballistic model cannot experience such an effect and is only weakly dependent on temperature and magnetic field. As a result, we propose that an experiment would unambiguously differentiate between diffusive and ballistic models by measuring the effect at low temperatures with an applied magnetic field. Additionally, we calculate the impact that fluctuations in the disorder distribution have on the Casimir effect. Assuming the validity of a diffusive model, we find that the Drude model is a good approximation of a more exact treatment of disorder. This work was supported by the DOE-BES (Grant No. DESC0001911) (A.A. and V.G.), the JQI-PFC (J.W.), and the Simons Foundation.

  4. Design, construction and testing of annular diffusers for high speed civil transportation combustor applications

    NASA Technical Reports Server (NTRS)

    Okhio, Cyril B.

    1995-01-01

    A theoretical and an experimental design study of subsonic flow through curved-wall annular diffusers is being carried out in order to establish the most pertinent design parameters for such devices and the implications of their application in the design of engine components in the aerospace industries. This investigation consists of solving numerically the full Navier Stokes and Continuity equations for the time-mean flow. Various models of turbulence are being evaluated for adoption throughout the study and comparisons would be made with experimental data where they exist. Assessment of diffuser performance based on the dissipated mechanical energy would also be made. The experimental work involves the application of Computer Aided Design software tool to the development of a suitable annular diffuser geometry and the subsequent downloading of such data to a CNC machine at Central State University. The results of the investigations are expected to indicate that more cost effective component design of such devices as effective component design of such devices as diffusers which normally contain complex flows can still be achieved. In this regard a review paper was accepted and presented at the First International Conference on High Speed Civil Transportation Research held at North Carolina A&T in December of 1994.

  5. Design, construction and testing of annular diffusers for high speed civil transportation combustor applications

    NASA Astrophysics Data System (ADS)

    Okhio, Cyril B.

    1995-08-01

    A theoretical and an experimental design study of subsonic flow through curved-wall annular diffusers is being carried out in order to establish the most pertinent design parameters for such devices and the implications of their application in the design of engine components in the aerospace industries. This investigation consists of solving numerically the full Navier Stokes and Continuity equations for the time-mean flow. Various models of turbulence are being evaluated for adoption throughout the study and comparisons would be made with experimental data where they exist. Assessment of diffuser performance based on the dissipated mechanical energy would also be made. The experimental work involves the application of Computer Aided Design software tool to the development of a suitable annular diffuser geometry and the subsequent downloading of such data to a CNC machine at Central State University. The results of the investigations are expected to indicate that more cost effective component design of such devices as effective component design of such devices as diffusers which normally contain complex flows can still be achieved. In this regard a review paper was accepted and presented at the First International Conference on High Speed Civil Transportation Research held at North Carolina A&T in December of 1994.

  6. Borelli's lactritmel agar induces conidiation in rare-macroconidia producing dermatophytic fungi.

    PubMed

    Ilkit, Macit; Gümral, Ramazan; Döğen, Aylin

    2012-10-01

    Macroconidia are among the most important indicators used to identify dermatophytic fungi, but several do not usually sporulate and/or produce macroconidia on Sabouraud glucose agar. Specifically, Microsporum audouinii, M. ferrugineum, Trichophyton concentricum, T. schoenleinii, T. verrucosum, and T. violaceum (including T. soudanense and T. yaoundei) rarely form macroconidia and, therefore, cannot be easily identified. In this study, we investigated the production of macroconidia on nine common laboratory media, including Borelli's lactritmel agar (BLA), modified Borelli's lactritmel agar (MBLA), brain heart infusion agar (BHIA), Christensen's urease agar in Petri dishes (UPA), cornmeal dextrose agar (CMDA), Lowenstein-Jensen agar (LJA), malt extract agar (MEA), oatmeal agar (OA), and potato dextrose agar (PDA). The performance of these media was evaluated using 18 rare-macroconidia producing isolates, including representative of the six species mentioned above. All cultures in this study were incubated at 26°C on the bench, and conidia formation on each was investigated at 5, 10, 15, 20, 25, and 30 days of incubation. BLA apparently improved macroconidia production after 15 days and was the most useful nutrient agar medium to induce these phenotypic characters in daily practice, closely followed by OA, PDA, and MBLA. PMID:22563856

  7. Physicochemical properties of biodegradable polyvinyl alcohol-agar films from the red algae Hydropuntia cornea.

    PubMed

    Madera-Santana, Tomás J; Robledo, Daniel; Freile-Pelegrín, Yolanda

    2011-08-01

    Agar obtained from the red alga Hydropuntia cornea was blended with polyvinyl alcohol (PVOH) in order to produce biodegradable films. In this study, we compare the properties of biopolymeric films formulated with agars extracted from H. cornea collected at different seasons (rainy and dry) in the Gulf of Mexico coast and PVOH as synthetic matrix. The films were prepared at different agar contents (0%, 25%, 50%, 75%, and 100%) and their optical, mechanical, thermal, and morphological properties analyzed. The tensile strength of PVOH-agar films increased when agar content was augmented. The formulation with 50% agar from rainy season (RS) had a significant higher tensile strength when compared to those from dry season (DS; p < 0.05). Tensile modulus also displayed an increasing trend and likewise, for 50% and 75% agar blends from RS showed higher values than those from DS (p < 0.05). In contrast, elongation at break decreased as the agar content increased, independently of the season. Environmental scanning electron microscopy images of PVOH-agar 75% biofilms from RS showed a homogeneous structure with good interfacial adhesion between the two components. The changes evidenced in the FTIR spectrum of this blend suggest that hydrogen bonding is taking place between the agar ether linkages (C-O-C) and the hydroxyl groups (OH) of the PVOH. Based on the above mentioned results, blends of PVOH and 75% agar from H. cornea collected in rainy season showed good properties for applications in the biodegradable packaging industry. PMID:21207092

  8. Field evaluation of a horizontal well recirculation system for groundwater treatment: Pilot test at the Clean Test Site Portsmouth Gaseous Diffusion Plant, Piketon, Ohio

    SciTech Connect

    Muck, M.T.; Kearl, P.M.; Siegrist, R.L.

    1998-08-01

    This report presents the results of field testing a horizontal well recirculation system at the Portsmouth Gaseous Diffusion Plant (PORTS). The recirculation system uses a pair of horizontal wells, one for groundwater extraction and treatment and the other for reinjection of treated groundwater, to set up a recirculation flow field. The induced flow field from the injection well to the extraction well establishes a sweeping action for the removal and treatment of groundwater contaminants. The overall purpose of this project is to study treatment of mixed groundwater contaminants that occur in a thin water-bearing zone not easily targeted by traditional vertical wells. The project involves several research elements, including treatment-process evaluation, hydrodynamic flow and transport modeling, pilot testing at an uncontaminated site, and pilot testing at a contaminated site. The results of the pilot test at an uncontaminated site, the Clean Test Site (CTS), are presented in this report.

  9. Perpendicular diffusion of energetic particles: Numerical test of the theorem on reduced dimensionality

    SciTech Connect

    Qin, G.; Shalchi, A.

    2015-01-15

    A fundamental statement in diffusion theory is provided by the so-called theorem on reduced dimensionality. The latter theorem is saying that if the dimensionality of the turbulence is reduced, charged particles are tied to a single magnetic field line. If there is pitch-angle scattering and therewith parallel diffusion, this usually means that perpendicular transport is subdiffusive. Subdiffusive transport was found in numerous simulations for slab turbulence. However, it was unclear whether the theorem is valid for other models with reduced dimensionality such as the two-dimensional model. In the current paper, we simultaneously trace magnetic field lines and energetic particles and we compute the distance between the particle and the initial field line. We confirm the aforementioned theorem for slab turbulence but we cannot confirm it for two-dimensional turbulence. We also show that particles are not tied to field lines for two-component turbulence.

  10. Test particle propagation in magnetostatic turbulence. 1. Failure of the diffusion approximation

    NASA Technical Reports Server (NTRS)

    Klimas, A. J.; Sandri, G.; Scudder, J. D.; Howell, D. R.

    1976-01-01

    The equation which governs the quasi-linear approximation to the ensemble and gyro-phase averaged one-body probability distribution function is constructed from first principles. This derived equation is subjected to a thorough investigation in order to calculate the possible limitations of the quasi-linear approximation. It is shown that the reduction of this equation to a standard diffusion equation in the Markovian limit can be accomplished through the application of the adiabatic approximation. A numerical solution of the standard diffusion equation in the Markovian limit is obtained for the narrow parallel beam injection. Comparison of the diabatic and adiabatic results explicitly demonstrates the failure of the Markovian description of the probability distribution function. Through the use of a linear time-scale extension the failure of the adiabatic approximation, which leads to the Markovian limit, is shown to be due to mixing of the relaxation and interaction time scales in the presence of the strong mean field.

  11. Cold-Flow Testing of a Proposed Integrated Center-Body Diffuser/Steam Blocker Concept for Plum Brook Station's B-2 Test Facility

    NASA Technical Reports Server (NTRS)

    Edwards, Daryl A.; Weaver, Harold F; Kastner, Carl E., Jr.

    2009-01-01

    The center-body diffuser (CBD) steam blocker (SB) system is a concept that incorporates a set of secondary drive nozzles into the envelope of a CBD, such that both nozzle systems (i.e., the rocket engine and the steam blocking nozzles) utilize the same supersonic diffuser, and will operate either singularly or concurrently. In this manner, the SB performs as an exhaust system stage when the rocket engine is not operating, and virtually eliminates discharge flow on rocket engine shutdown. A 2.25-percent scale model of a proposed SB integrated into a diffuser for the Plum Brook B-2 facility was constructed and cold-flow tested for the purpose of evaluating performance characteristics of various design options. These specific design options addressed secondary drive nozzle design (method of steam injection), secondary drive nozzle location relative to CBD throat, and center-body throat length to diameter (L/D) ratios. The objective of the test program is to identify the desired configuration to carry forward should the next phase of design proceed. The tested scale model can provide data for various pressure ratios; however, its design is based on a proposed B-2 spray chamber (SC) operating pressure of 4.0 psia and a steam supply pressure of 165 psia. Evaluation of the test data acquired during these tests indicate that either the discrete axial or annular nozzle configuration integrated into a CBD, with an annular throat length of 1.5 L/D at the nominal injection position, would be suitable to carry forward from the SB's perspective. Selection between these two then becomes more a function of constructability and implementation than performance. L/D also has some flexibility, and final L/D selection can be a function of constructability issues within a limited range.

  12. Survey of disc diffusion antimicrobial sensitivity testing in avian bacteriology laboratories and the evaluation of a standardised method.

    PubMed

    Whithear, K G; Htwe, T; Sulaiman, I

    1986-04-01

    A survey was conducted in which 15 laboratories involved in avian bacteriology tested the antimicrobial sensitivity of cultures of Staphylococcus aureus, S. epidermidis, Escherichia coli, Alcaligenes faecalis and Salmonella typhimurium, using the disc diffusion test as routinely practised in each laboratory. Up to 28 different antimicrobials or antimicrobial combinations were used. The most commonly tested agents were ampicillin, benzylpenicillin, chloramphenicol, erythromycin, furazolidone, neomycin, streptomycin, sulphonamide, tetracycline and trimethoprim/sulphonamide. Results between laboratories were compared according to the width of the zone of inhibition (annular radius) where 5 or more laboratories used the same disc content of a particular antimicrobial agent, and on whether a culture was interpreted as being sensitive or resistant to a particular agent. The variation in annular radii about the mean values were less than +/- 2 SD in 39.5% and greater than +/- 3 SD in 32.6% of 43 different antimicrobial/culture combinations involving 8 different agents. The range of annular radii measurements was greatest with trimethoprim/sulphonamide and streptomycin discs and with the S. epidermidis culture. Variation in the interpretation of test results was greatest with the Gram-negative bacteria, where for each of the more frequently tested agents at least one, commonly 2 and sometimes all 3 cultures were reported as sensitive and resistant to the same agent by different laboratories. The calibrated dichotomous sensitivity (CDS) test of Bell (1975, 1984) was evaluated as a standardised disc diffusion procedure and was found to be reproducible and accurate. Results obtained using antimicrobial agents calibrated for use in the CDS test were compared with results obtained in the survey using the same agents or agents showing identical resistance patterns.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:3741274

  13. Evaluation of eight agar media for the isolation of shiga toxin-Producing Escherichia coli.

    PubMed

    Gill, Alexander; Huszczynski, George; Gauthier, Martine; Blais, Burton

    2014-01-01

    The growth characteristics of 96 shiga toxin-producing Escherichia coli (STEC) strains representing 36 different O-types (including priority O types O26, O45, O103, O111, O121, O145 and O157) on commercial and in-house agar media were studied. The ability of the strains to grow on agar media with varying selective supplement formulations was evaluated using MacConkey Agar (MAC); Rainbow® Agar O157 (RBA); Rainbow® Agar O157 with manufacturer-recommended selective supplements (RBA-NT); Rainbow® Agar O157 with USDA-recommended selective supplements (RBA-USDA); CHROMagar STEC™ (CH STEC); Tryptone Bile agar containing cefixime and tellurite (TBA-CT); Tryptone Bile agar containing cefixime, tellurite, eosin and methylene blue (TBA-EM); and VTEC agar. All of the strains were able to grow on MAC, RBA and VTEC agar, whereas a number of strains (including some non-O157 priority O types) were unable to grow on the highly selective media CH STEC, RBA-NT, RBA-USDA, TBA-EM and TBA-CT. Only RBA-NT and CH STEC exhibited significant inhibition of background flora from ground beef enrichment. Significant inhibition of background flora from beef trim enrichment was observed with RBA-NT, RBA-USDA, CH STEC, TBA-EM and VTEC agar. With exception of E. coli O157, several different colony morphologies were observed on the differential plating media among strains of the same O type, indicating that this colony morphology is not a reliable means of identifying target STEC. These results suggest that an approach to maximize the recovery of target STEC from beef enrichment cultures is dual plating on lesser (RBA, MAC, VTEC agar) and more highly (RBA-NT, CH STEC) selective agars. PMID:24211606

  14. Characterization of Leptospiral Chemoreceptors Using a Microscopic Agar Drop Assay.

    PubMed

    Affroze, Samia; Islam, Md Shafiqul; Takabe, Kyosuke; Kudo, Seishi; Nakamura, Shuichi

    2016-08-01

    Bacterial chemotaxis is induced by sensing chemical stimuli via chemoreceptors embedded in the cytoplasmic membrane, enabling the cells to migrate toward nutrients or away from toxins. The chemoreceptors of Escherichia coli and Salmonella spp. have been well studied and are functionally classified on the basis of detectable substrates. The spirochete Leptospira possesses more than ten chemoreceptors and shows attractive or repellent responses against some sugars, amino acids, and fatty acids. However, the roles of these chemoreceptors have not been investigated. In this study, we conducted a chemotaxis assay called microscopic agar drop assay in combination with competition experiments, determining whether two kinds of attractants are recognized by the same type of chemoreceptor in the saprophytic Leptospira strain, Leptospira biflexa. Analyzing the competition effect observed between several pairs of chemicals, we found that L. biflexa senses sugars via chemoreceptors different from those that sense amino acids and fatty acids. PMID:27109059

  15. Extensive database of liquid phase diffusion coefficients of some frequently used test molecules in reversed-phase liquid chromatography and hydrophilic interaction liquid chromatography.

    PubMed

    Song, Huiying; Vanderheyden, Yoachim; Adams, Erwin; Desmet, Gert; Cabooter, Deirdre

    2016-07-15

    Diffusion plays an important role in all aspects of band broadening in chromatography. An accurate knowledge of molecular diffusion coefficients in different mobile phases is therefore crucial in fundamental column performance studies. Correlations available in literature, such as the Wilke-Chang equation, can provide good approximations of molecular diffusion under reversed-phase conditions. However, these correlations have been demonstrated to be less accurate for mobile phases containing a large percentage of acetonitrile, as is the case in hydrophilic interaction liquid chromatography. A database of experimentally measured molecular diffusion coefficients of some 45 polar and apolar compounds that are frequently used as test molecules under hydrophilic interaction liquid chromatography and reversed-phase conditions is therefore presented. Special attention is given to diffusion coefficients of polar compounds obtained in large percentages of acetonitrile (>90%). The effect of the buffer concentration (5-10mM ammonium acetate) on the obtained diffusion coefficients is investigated and is demonstrated to mainly influence the molecular diffusion of charged molecules. Diffusion coefficients are measured using the Taylor-Aris method and hence deduced from the peak broadening of a solute when flowing through a long open tube. The validity of the set-up employed for the measurement of the diffusion coefficients is demonstrated by ruling out the occurrence of longitudinal diffusion, secondary flow interactions and extra-column effects, while it is also shown that radial equilibration in the 15m long capillary is effective. PMID:27240944

  16. Field tests of diffusion samplers for inorganic constituents in wells and at a ground-water discharge zone

    USGS Publications Warehouse

    Vroblesky, Don A.; Petkewich, Matthew D.; Campbell, Ted R.

    2002-01-01

    Field tests were performed on two types of diffusion samplers to collect representative samples of inorganic constituents from ground water in wells and at an arsenic-contaminated ground-water-discharge zone beneath a stream. Nylon-screen samplers and dialysis samplers were tested for the collection of arsenic, calcium, chloride, iron, manganese, sulfate, and dissolved oxygen. The investigations were conducted at the Naval Industrial Reserve Ordnance Plant (NIROP), Fridley, Minnesota, and at the Naval Air Station Fort Worth Joint Reserve Base (NAS Fort Worth JRB), Texas. Data indicate that, in general, nylon-screen and dialysis diffusion samplers are capable of obtaining concentrations of inorganic solutes in ground water that correspond to concentrations obtained by low-flow sampling. Diffusion samplers offer a potentially time-saving approach to well sampling. Particular care must be taken, however, when sampling for iron and other metals, because of the potential for iron precipitation by oxygenation and when dealing with chemically stratified sampling intervals. Simple nylon-screen jar samplers buried beneath creekbed sediment appear to be effective tools for locating discharge zones of arsenic contaminated ground water. Although the LDPE samplers have proven to be inexpensive and simple to use in wells, they are limited by their inability to provide a representative sample of ionic solutes. The success of nylon-screen samplers in sediment studies suggests that these simple samplers may be useful for collecting water samples for inorganic constituents in wells. Results using dialysis bags deployed in wells suggest that these types of samplers have the potential to provide a representative sample of both VOCs and ionic solutes from ground water (Kaplan and others, 1991; Theodore A. Ehlke, U.S. Geological Survey, written commun., 2001). The purpose of this report is to provide results of field tests investigating the potential to use diffusion samplers to collect

  17. Comparison of the BBL CHROMagar Staph aureus Agar Medium to Conventional Media for Detection of Staphylococcus aureus in Respiratory Samples

    PubMed Central

    Flayhart, Diane; Lema, Clara; Borek, Anita; Carroll, Karen C.

    2004-01-01

    Screening for Staphylococcus aureus has become routine in certain patient populations. This study is the first clinical evaluation of the BBL CHROMagar Staph aureus agar (CSA) medium (BD Diagnostics, Sparks, Md.) for detection of S. aureus in nasal surveillance cultures and in respiratory samples from cystic fibrosis (CF) patients. S. aureus colonies appear mauve on CSA. Other organisms are inhibited or produce a distinctly different colony color. S. aureus was identified from all media by slide coagulase, exogenous DNase, and mannitol fermentation assays. Susceptibility testing was performed using the agar dilution method. A total of 679 samples were evaluated. All samples were inoculated onto CSA. Nasal surveillance cultures were inoculated onto sheep blood agar (SBA) (BD Diagnostics), and samples from CF patients were inoculated onto mannitol salt agar (MSA) (BD Diagnostics). Of the 679 samples cultured, 200 organisms produced a mauve color on CSA (suspicious for S. aureus) and 180 were positive for S. aureus on SBA or MSA. Of 200 CSA-positive samples 191 were identified as S. aureus. Nine mauve colonies were slide coagulase negative and were subsequently identified as Staphylococcus lugdunensis (one), Staphylococcus epidermidis (three), Staphylococcus haemolyticus (one), and Corynebacterium species (four). CSA improved the ability to detect S. aureus by recovering 12 S. aureus isolates missed by conventional media. Of the 192 S. aureus isolates recovered, 122 were methicillin susceptible and 70 were methicillin resistant. Overall, the sensitivity and specificity of CSA in this study were 99.5 and 98%, respectively. There was no difference in the performance of the slide coagulase test or in susceptibility testing performed on S. aureus recovered from CSA compared to SBA or MSA. Our data support the use of CSA in place of standard culture media for detection of S. aureus in heavily contaminated respiratory samples. PMID:15297498

  18. Patient Perceptions of a Personal Health Record: A Test of the Diffusion of Innovation Model

    PubMed Central

    2012-01-01

    Background Personal health records (PHRs) have emerged as an important tool with which patients can electronically communicate with their doctors and doctor’s offices. However, there is a lack of theoretical and empirical research on how patients perceive the PHR and the differences in perceptions between users and non-users of the PHR. Objective To apply a theoretical model, the diffusion of innovation model, to the study of PHRs and conduct an exploratory empirical study on the applicability of the model to the study of perceptions of PHRs. A secondary objective was to assess whether perceptions of PHRs predict the perceived value of the PHR for communicating with the doctor’s office. Methods We first developed a survey capturing perceptions of PHR use and other factors such as sociodemographic characteristics, access and use of technology, perceived innovativeness in the domain of information technology, and perceptions of privacy and security. We then conducted a cross-sectional survey (N = 1500). Patients were grouped into five groups of 300: PHR users (innovators, other users, and laggards), rejecters, and non-adopters. We applied univariate statistical analysis (Pearson chi-square and one-way ANOVA) to assess differences among groups and used multivariate statistical techniques (factor analysis and multiple regression analysis) to assess the presence of factors identified by the diffusion of innovation model and the predictors of our dependent variable (value of PHR for communicating with the doctor’s office). Results Of the 1500 surveys, 760 surveys were returned for an overall response rate of 51%. Computer use among non-adopters (75%) was lower than that among PHR users (99%) and rejecters (92%) (P < .001). Non-adopters also reported a lower score on personal innovativeness in information technology (mean = 2.8) compared to 3.6 and 3.1, respectively, for users and rejecters (P < .001). Four factors identified by the diffusion of innovation model

  19. Tests on novel pseudo-potentials generated from diffusion Monte Carlo data.

    NASA Astrophysics Data System (ADS)

    Reboredo, Fernando; Hood, Randolph; Bajdich, Michal

    2012-02-01

    Since Dmitri Mendeleev developed a table in 1869 to illustrate recurring ("periodic") trends of the elements, it has been understood that most chemical and physical properties can be described by taking into account the outer most electrons of the atoms. These valence electrons are mainly responsible for the chemical bond. In many ab-initio approaches only valence electrons are taken into account and a pseudopotential is used to mimic the response of the core electrons. Typically an all-electron calculation is used to generate a pseudopotential that is used either within density functional theory or quantum chemistry approaches. In this talk we explain and demonstrate a new method to generate pseudopotentials directly from all-electron many-body diffusion Monte Carlo (DMC) calculations and discuss the results of of the transferability of these pseudopotentials. The advantages of incorporating the exchange and correlation directly from DMC into the pseudopotential are also discussed.

  20. Use of hydrogen peroxide treatment and crystal violet agar plates for selective recovery of bacteriophages from natural environments

    SciTech Connect

    Asghari, A.; Farrah, S.R.; Bitton, G. )

    1992-04-01

    Hydrogen peroxide inactivated bacteriophages and bacteria at different rates. A concentration of 0.1% hydrogen peroxide reduced the numbers of several bacteria by an average of 94% but caused an average of 25% inactivation in the numbers of bacteriophages tested. Treating natural samples with hydrogen peroxide selectively reduced the indigenous bacterial flora and permitted better visualization of plaques of lawns of Escherichia coli C-3000. In some cases indigenous gram-positive bacteria were relatively resistant to hydrogen peroxide, but their growth could be limited by incorporation of crystal violet into the bottom agar used for plaque assays. The use of hydrogen peroxide treatment and crystal violet-containing plates permitted recovery of more phages from natural samples than did other procedures, such as chloroform pretreatment or the use of selective plating agar such as EC medium.

  1. Determination of Disk Diffusion and MIC Quality Control Guidelines for Solithromycin, a Novel Fluoroketolide Antibacterial, against Neisseria gonorrhoeae

    PubMed Central

    Ross, James E.; Farrell, David J.; Flamm, Robert K.; Jones, Ronald N.

    2015-01-01

    This solithromycin quality control study was performed to establish quality control (QC) ranges for the N. gonorrhoeae ATCC 49226 control strain for MIC agar dilution testing (AD) and zones by disk diffusion testing (DD). The following ranges were established: AD, 0.03 to 0.25 μg/ml, and DD, 33 to 43 mm. In January 2015, the CLSI Subcommittee on Antimicrobial Susceptibility Testing approved these ranges, which will be important when evaluating solithromycin against clinical isolates of N. gonorrhoeae. PMID:26378286

  2. Comparison of disc diffusion, Etest and broth microdilution for testing susceptibility of carbapenem-resistant P. aeruginosa to polymyxins

    PubMed Central

    van der Heijden, Inneke M; Levin, Anna S; De Pedri, Ewerton H; Fung, Liang; Rossi, Flavia; Duboc, Gisele; Barone, Antonio A; Costa, Silvia F

    2007-01-01

    Background Considering the increasing use of polymyxins to treat infections due to multidrug resistant Gram-negative in many countries, it is important to evaluate different susceptibility testing methods to this class of antibiotic. Methods Susceptibility of 109 carbapenem-resistant P. aeruginosa to polymyxins was tested comparing broth microdilution (reference method), disc diffusion, and Etest using the new interpretative breakpoints of Clinical and Laboratory Standards Institute. Results Twenty-nine percent of isolates belonged to endemic clone and thus, these strains were excluded of analysis. Among 78 strains evaluated, only one isolate was resistant to polymyxin B by the reference method (MIC: 8.0 μg/mL). Very major and major error rates of 1.2% and 11.5% were detected comparing polymyxin B disc diffusion with the broth microdilution (reference method). Agreement within 1 twofold dilution between Etest and the broth microdilution were 33% for polymyxin B and 79.5% for colistin. One major error and 48.7% minor errors were found comparing polymyxin B Etest with broth microdilution and only 6.4% minor errors with colistin. The concordance between Etest and the broth microdilution (reference method) was respectively 100% for colistin and 90% for polymyxin B. Conclusion Resistance to polymyxins seems to be rare among hospital carbapenem-resistant P. aeruginosa isolates over a six-year period. Our results showed, using the new CLSI criteria, that the disc diffusion susceptibility does not report major errors (false-resistant results) for colistin. On the other hand, showed a high frequency of minor errors and 1 very major error for polymyxin B. Etest presented better results for colistin than polymyxin B. Until these results are reproduced with a large number of polymyxins-resistant P. aeruginosa isolates, susceptibility to polymyxins should be confirmed by a reference method. PMID:17697363

  3. Non-invasive Measurement of Thermal Diffusivity Using High-Intensity Focused Ultrasound and Through-Transmission Ultrasonic Imaging.

    PubMed

    Yeshurun, Lilach; Azhari, Haim

    2016-01-01

    Thermal diffusivity at the site ablated by high-intensity focused ultrasound (HIFU) plays an important role in the final therapeutic outcome, as it influences the temperature's spatial and temporal distribution. Moreover, as tissue thermal diffusivity is different in tumors as compared with normal tissue, it could also potentially be used as a new source of imaging contrast. The aim of this study was to examine the feasibility of combining through-transmission ultrasonic imaging and HIFU to estimate thermal diffusivity non-invasively. The concept was initially evaluated using a computer simulation. Then it was experimentally tested on phantoms made of agar and ex vivo porcine fat. A computerized imaging system combined with a HIFU system was used to heat the phantoms to temperatures below 42°C to avoid irreversible damage. Through-transmission scanning provided the time-of-flight values in a region of interest during its cooling process. The time-of-flight values were consequently converted into mean values of speed of sound. Using the speed-of-sound profiles along with the developed model, we estimated the changes in temperature profiles over time. These changes in temperature profiles were then used to calculate the corresponding thermal diffusivity of the studied specimen. Thermal diffusivity for porcine fat was found to be lower by one order of magnitude than that obtained for agar (0.313×10(-7)m(2)/s vs. 4.83×10(-7)m(2)/s, respectively, p < 0.041). The fact that there is a substantial difference between agar and fat implies that non-invasive all-ultrasound thermal diffusivity mapping is feasible. The suggested method may particularly be suitable for breast scanning. PMID:26489364

  4. Green synthesis of gold nanoparticles of different sizes and shapes using agar-agar water solution and femtosecond pulse laser irradiation

    NASA Astrophysics Data System (ADS)

    Almeida de Matos, Ricardo; da Silva Cordeiro, Thiago; Elgul Samad, Ricardo; Dias Vieira, Nilson; Coronato Courrol, Lilia

    2012-11-01

    We report a method to create gold nanoparticles of different sizes and shapes using agar-agar water solution and irradiation with light from a xenon lamp, followed by ultrashort laser pulses. No additives, such as solvents, surfactants or reducing agents, were used in the procedure. Laser irradiation (laser ablation) was important to the reduction of the nanoparticles diameter and formation of another shapes. Distilled water was used as solvent and agar-agar (hydrophilic colloid extracted from certain seaweeds) was important for the stabilization of gold nanoparticles, avoiding their agglomeration. The formation of gold nanoparticles was confirmed with ultraviolet-visible absorption and TEM microscopy. The gold nanoparticles acquired spherical, prism, and rod shapes depending on the laser parameters. Variation of laser irradiation parameters as pulse energy, irradiation time and repetition rate was assessed. The relevant mechanisms contributing for the gold nanoparticles production are discussed.

  5. Comparison of four commercial brucella agar media for growth of anaerobic organisms.

    PubMed Central

    Mangels, J I; Douglas, B P

    1989-01-01

    Four different commercial brucella blood agar plating media (Anaerobe Systems, BBL Microbiology Systems, Remel, and Scott Laboratories) were compared for the abilities to recover anaerobic organisms from clinical specimens and to support the growth of American Type Culture Collection anaerobic stock cultures. Following 24 h of incubation in an anaerobe chamber, Anaerobe Systems prereduced, anaerobically sterilized brucella plates yielded 63% of the total clinical anaerobe isolates, the Scott medium yielded 51%, the Remel medium yielded 42%, and the BBL medium yielded 37%. Poor growth of Peptostreptococcus magnus, P. anaerobius, Fusobacterium necrophorum, F. nucleatum, and pigmented Bacteroides spp. was observed on brucella media obtained from BBL, Remel, and Scott. Data obtained with stock anaerobic cultures showed that Anaerobe Systems plates yielded good growth and produced a larger colony size with all of the strains tested in 1 day, whereas poor growth of Peptostreptococcus spp., B. melaninogenicus, and Fusobacterium spp. was noted on brucella media from BBL, Remel, and Scott. PMID:2584378

  6. Chromium and reactive element modified aluminide diffusion coatings on superalloys - Environmental testing

    NASA Technical Reports Server (NTRS)

    Bianco, Robert; Rapp, Robert A.; Smialek, James L.

    1993-01-01

    The high temperature performance of reactive element (RE)-doped and Cr/RE-modified aluminide diffusion coatings on commercial Ni-base alloy substrates was determined. In isothermal oxidation at 1100 C in air, RE-doped aluminide coatings on IN 713LC substrates formed a continuous slow-growing n-Al2O3 scale after 44 hrs of exposure. The coatings were protected by either an outer ridge Al2O3 scale with an inner compact Al2O3 scale rich in RE or by a continuous compact scale without any noticeable cracks or flaws. The cyclic oxidation behavior of Cr/RE-modified aluminide coatings on Rene 80 and IN 713LC alloys and of RE-doped aluminide coatings on IN 713LC alloys at 1100 C in static air was determined. Pack powder entrapment from the powder contacting (PC) process detracted significantly from the overall cyclic oxidation performance. Type I hot corrosion behavior of Cr/RE-modified aluminide coatings on Rene 80 and Mar-M247 alloy substrates at 900 C in a catalyzed 0.1 percent SO3/O3 gas mixture was determined. The modified coatings produced from the PC arrangement provided significantly better resistance to hot corrosion attack than commercial low-activity aluminide coatings produced by the above pack arrangement.

  7. Mechanically switchable solid inhomogeneous phantom for performance tests in diffuse imaging and spectroscopy.

    PubMed

    Pifferi, Antonio; Torricelli, Alessandro; Cubeddu, Rinaldo; Quarto, Giovanna; Re, Rebecca; Sekar, Sanathana K V; Spinelli, Lorenzo; Farina, Andrea; Martelli, Fabrizio; Wabnitz, Heidrun

    2015-12-01

    A mechanically switchable solid inhomogeneous phantom simulating localized absorption changes was developed and characterized. The homogeneous host phantom was made of epoxy resin with black toner and titanium dioxide particles added as absorbing and scattering components, respectively. A cylindrical rod, movable along a hole in the block and made of the same material, has a black polyvinyl chloride cylinder embedded in its center. By varying the volume and position of the black inclusion, absorption perturbations can be generated over a large range of magnitudes. The phantom has been characterized by various time-domain diffuse optics instruments in terms of absorption and scattering spectra, transmittance images, and reflectance contrast. Addressing a major application of the phantom for performance characterization for functional near-infrared spectroscopy of the brain, the contrast was measured in reflectance mode while black cylinders of volumes from ≈20  mm3 to ≈270  mm3 were moved in lateral and depth directions, respectively. The new type of solid inhomogeneous phantom is expected to become a useful tool for routine quality check of clinical instruments or implementation of industrial standards provided an experimental characterization of the phantom is performed in advance. PMID:26220211

  8. Mechanically switchable solid inhomogeneous phantom for performance tests in diffuse imaging and spectroscopy

    NASA Astrophysics Data System (ADS)

    Pifferi, Antonio; Torricelli, Alessandro; Cubeddu, Rinaldo; Quarto, Giovanna; Re, Rebecca; Sekar, Sanathana K. V.; Spinelli, Lorenzo; Farina, Andrea; Martelli, Fabrizio; Wabnitz, Heidrun

    2015-12-01

    A mechanically switchable solid inhomogeneous phantom simulating localized absorption changes was developed and characterized. The homogeneous host phantom was made of epoxy resin with black toner and titanium dioxide particles added as absorbing and scattering components, respectively. A cylindrical rod, movable along a hole in the block and made of the same material, has a black polyvinyl chloride cylinder embedded in its center. By varying the volume and position of the black inclusion, absorption perturbations can be generated over a large range of magnitudes. The phantom has been characterized by various time-domain diffuse optics instruments in terms of absorption and scattering spectra, transmittance images, and reflectance contrast. Addressing a major application of the phantom for performance characterization for functional near-infrared spectroscopy of the brain, the contrast was measured in reflectance mode while black cylinders of volumes from ≈20 mm3 to ≈270 mm3 were moved in lateral and depth directions, respectively. The new type of solid inhomogeneous phantom is expected to become a useful tool for routine quality check of clinical instruments or implementation of industrial standards provided an experimental characterization of the phantom is performed in advance.

  9. Comparison of LFM-test particle simulations and radial diffusion models of radiation belt electron injection into the slot region

    NASA Astrophysics Data System (ADS)

    Chu, F.; Hudson, M.; Kress, B.

    2008-12-01

    The physics-based Lyon-Fedder-Mobarry (LFM) code simulates Earth's magnetospheric topology and dynamics by solving the equations of ideal MHD using input solar wind parameters at the upstream boundary. Comparison with electron phase space density evolution during storms using a radial diffusion code, as well as spacecraft measurements where available, will tell us when diffusion is insufficiently accurate for radiation belt simulation, for example, during CME-shock injection events like March 24, 1991, which occurred on MeV electron drift time scales of minutes (Li et al., 1993). The 2004 July and 2004 November storms, comparable in depth of penetration into the slot region to the Halloween 2003 storm, have been modeled with both approaches. The November 8, 2004 storm was preceded by a Storm Sudden Commencement produced by a CME-shock followed by minimum Dst = -373 nT, while the July 23 to July 28 storm interval had milder consecutive drops in Dst, corresponding to multiple CME shocks and southward IMF Bz turnings. We have run the November and July storms with LFM using ACE data as upstream input, running the July storm with lower temporal resolution over a longer time interval. The November storm was different because the SCC shock was unusually intense, therefore the possibility of drift time scale acceleration by the associated magnetosonic impulse produced by the shock exists, as in March 1991 and also Halloween 2003 events (Kress et al., 2007). It can then take a short time (minutes) for electrons to be transported to low L shell while conserving their first invariant, resulting in a peak in energy and phase space density in the slot region. Radial diffusion suffices for some storm periods like the July 2004 sequence of three storms, while the guiding center test particle simulation in MHD fields is necessary to describe prompt injections which occur faster than diffusive time scales, for which November 2004 is a likely candidate. Earlier examples have been

  10. Pulsed photothermal temperature profiling of agar tissue phantoms.

    PubMed

    Milanic, Matija; Majaron, Boris; Nelson, J Stuart

    2007-11-01

    We determine experimentally the accuracy of pulsed photothermal radiometric (PPTR) temperature depth profiling in water-based samples. We use custom tissue phantoms composed of agar gel layers separated by very thin absorbing layers. Two configurations of the acquisition system are compared, one using the customary spectral band of the InSb radiation detector (3.0-5.5 microm) and the other with a spectrally narrowed acquisition band (4.5-5.5 microm). The laser-induced temperature depth profiles are reconstructed from measured radiometric signals using a custom minimization algorithm. The results correlate very well with phantom geometry as determined by optical coherence tomography (OCT) and histology in all evaluated samples. Determination of the absorbing layer depth shows good repeatability with spatial resolution decreasing with depth. Spectral filtering improves the accuracy and resolution, especially for shallow absorption layers (~120 microm) and more complex structures (e.g., with two absorbing layers). The average full width at half maximum (FWHM) of the temperature peaks equals 23% of the layer depth. PMID:17522951

  11. Six minute walking test and carbon monoxide diffusing capacity for non-small cell lung cancer: easy performed tests in every day practice

    PubMed Central

    Kerenidi, Theodora; Huang, Haidong; Kontakiotis, Theodoros; Tremma, Ourania; Porpodis, Konstantinos; Kalianos, Anastasios; Rapti, Ageliki; Foroulis, Christoforos; Zissimopoulos, Athanasios; Courcoutsakis, Nikolaos; Zarogoulidis, Konstantinos

    2012-01-01

    Background Several studies have demonstrated that reduced lung function is a significant risk factor for lung cancer and increased surgical risk in patients with operable stages of lung cancer. The aim of the study was to perform pulmonary function tests and investigate which is a favorable respiratory function test for overall survival between lung cancer stages. Methods Lung function tests were performed to lung cancer patients with non-small cell lung cancer of stage I, II, III and IV (241 patients in total). They had the last follow-up consecutively between December 2006 and July 2008. The staging was decided according to the sixth edition of TNM classification of NSCLC. The Forced Expiratory Volume in 1sec (FEV1), Forced Vital Capacity (FVC) and Carbon Monoxide Diffusing Capacity (DLCO) were measured according to American Thoracic Society/European Respiratory Society guidelines. The 6 Minute Walking Test (6MWT) was measured according to the American Thoracic Society. Results There was a significant association of the DLCO upon diagnosis and overall survival for stage II (P<0.007) and IV (P<0.003). Furthermore, there was a significant association between 6MWT and overall survival for stage III (P<0.001) and stage IV (P<0.010). Conclusions The significance for each lung function test is different among the stages of NSCLC. DLCO and 6MWT upon admission are the most valuable prognostic factors for overall survival of NSCLC. PMID:23205280

  12. [Comparison of ertapenem-EMB Agar with traditional methods for screening carbapenem-resistant Klebsiella pneumoniae from rectal swabs].

    PubMed

    Perçin, Duygu; Colakoğlu, Selcan; Durmaz, Süleyman; Ekincioğlu, Pınar

    2012-10-01

    Detection of rectal colonization with carbapenem-resistant Klebsiella pneumoniae (CRKP) is the most important step in the infection control protocols in order to prevent infections caused by CRKP which has an increasing incidence all over the world. In this study, it was aimed to compare the detection rate of 2 mg/L ertapenem EMB agar medium with the other methods recommended by various international guidelines. These methods include direct plate method using ertapenem disc, enrichment method in tryptic soy broth containing 2 mg/L ertapenem and the investigation of the predominant betalactamases in the colonized patients. The lowest inoculum detected by different methods was determined by using simulative challenge test prepared for this purpose. The ability to detect CRKP from rectal swabs was evaluated by using the clinical specimens of 801 patients. For all bacteria isolated, carbapenem susceptibility was evaluated by using E-test method, the presence of beta-lactamases was determined by using modified Hodge test (MHT), and the carbapenemase genes were investigated by using multiplex polymerase chain reaction (PCR). The lowest inoculum detected by ertapenem-EMB agar was 50 CFU/mL whereas the lowest inocula were 1 x 105 and 1 x 103, respectively by tryptic soy broth with ertapenem and direct plate method. No resistance gene were identified by PCR in 13 (39.4%) of 33 isolates, whereas blaOXA-48 was detected in 19 (95%) and blaIMP in 1 (5%) of 20 positive isolates. All of the positive strains were resistant to imipenem and ertapenem, while 2 (10%) strains were found to be susceptible to doripenem and meropenem. While MHT was negative in all strains which were negative for resistance genes, all resistance gene positive strains except one blaOXA-48 strain that was also sensitive to doripenem and meropenem, were found to be positive with MHT. According to the results of PCR, the sensitivities of the three methods were found to be 80%. The specificities, positive and

  13. The Effect of Diffused Aromatherapy on Test Anxiety among Baccalaureate Nursing Students

    ERIC Educational Resources Information Center

    Johnson, Catherine E.

    2013-01-01

    A quantitative, randomized, pretest, posttest study was conducted to assess the effect of aromatherapy on cognitive test anxiety among nursing students. Sophomore nursing students (n = 39) from a private, 4-year college, were randomized into either the control group (n = 18) or the experimental group (n = 21). Each participant completed the…

  14. Matrix diffusion coefficients in volcanic rocks at the Nevada test site: influence of matrix porosity, matrix permeability, and fracture coating minerals.

    PubMed

    Reimus, Paul W; Callahan, Timothy J; Ware, S Doug; Haga, Marc J; Counce, Dale A

    2007-08-15

    Diffusion cell experiments were conducted to measure nonsorbing solute matrix diffusion coefficients in forty-seven different volcanic rock matrix samples from eight different locations (with multiple depth intervals represented at several locations) at the Nevada Test Site. The solutes used in the experiments included bromide, iodide, pentafluorobenzoate (PFBA), and tritiated water ((3)HHO). The porosity and saturated permeability of most of the diffusion cell samples were measured to evaluate the correlation of these two variables with tracer matrix diffusion coefficients divided by the free-water diffusion coefficient (D(m)/D*). To investigate the influence of fracture coating minerals on matrix diffusion, ten of the diffusion cells represented paired samples from the same depth interval in which one sample contained a fracture surface with mineral coatings and the other sample consisted of only pure matrix. The log of (D(m)/D*) was found to be positively correlated with both the matrix porosity and the log of matrix permeability. A multiple linear regression analysis indicated that both parameters contributed significantly to the regression at the 95% confidence level. However, the log of the matrix diffusion coefficient was more highly-correlated with the log of matrix permeability than with matrix porosity, which suggests that matrix diffusion coefficients, like matrix permeabilities, have a greater dependence on the interconnectedness of matrix porosity than on the matrix porosity itself. The regression equation for the volcanic rocks was found to provide satisfactory predictions of log(D(m)/D*) for other types of rocks with similar ranges of matrix porosity and permeability as the volcanic rocks, but it did a poorer job predicting log(D(m)/D*) for rocks with lower porosities and/or permeabilities. The presence of mineral coatings on fracture walls did not appear to have a significant effect on matrix diffusion in the ten paired diffusion cell experiments

  15. Matrix diffusion coefficients in volcanic rocks at the Nevada test site: Influence of matrix porosity, matrix permeability, and fracture coating minerals

    NASA Astrophysics Data System (ADS)

    Reimus, Paul W.; Callahan, Timothy J.; Ware, S. Doug; Haga, Marc J.; Counce, Dale A.

    2007-08-01

    Diffusion cell experiments were conducted to measure nonsorbing solute matrix diffusion coefficients in forty-seven different volcanic rock matrix samples from eight different locations (with multiple depth intervals represented at several locations) at the Nevada Test Site. The solutes used in the experiments included bromide, iodide, pentafluorobenzoate (PFBA), and tritiated water ( 3HHO). The porosity and saturated permeability of most of the diffusion cell samples were measured to evaluate the correlation of these two variables with tracer matrix diffusion coefficients divided by the free-water diffusion coefficient ( Dm/ D*). To investigate the influence of fracture coating minerals on matrix diffusion, ten of the diffusion cells represented paired samples from the same depth interval in which one sample contained a fracture surface with mineral coatings and the other sample consisted of only pure matrix. The log of ( Dm/ D*) was found to be positively correlated with both the matrix porosity and the log of matrix permeability. A multiple linear regression analysis indicated that both parameters contributed significantly to the regression at the 95% confidence level. However, the log of the matrix diffusion coefficient was more highly-correlated with the log of matrix permeability than with matrix porosity, which suggests that matrix diffusion coefficients, like matrix permeabilities, have a greater dependence on the interconnectedness of matrix porosity than on the matrix porosity itself. The regression equation for the volcanic rocks was found to provide satisfactory predictions of log( Dm/ D*) for other types of rocks with similar ranges of matrix porosity and permeability as the volcanic rocks, but it did a poorer job predicting log( Dm/ D*) for rocks with lower porosities and/or permeabilities. The presence of mineral coatings on fracture walls did not appear to have a significant effect on matrix diffusion in the ten paired diffusion cell experiments.

  16. Determining Enzyme Activity by Radial Diffusion

    ERIC Educational Resources Information Center

    Davis, Bill D.

    1977-01-01

    Discusses advantages of radial diffusion assay in determining presence of enzyme and/or rough approximation of amount of enzyme activities. Procedures are included for the preparation of starch-agar plates, and the application and determination of enzyme. Techniques using plant materials (homogenates, tissues, ungerminated embryos, and seedlings)…

  17. Physicochemical and morphological properties of plasticized poly(vinyl alcohol)-agar biodegradable films.

    PubMed

    Madera-Santana, T J; Freile-Pelegrín, Y; Azamar-Barrios, J A

    2014-08-01

    The effects of the addition of glycerol (GLY) on the physicochemical and morphological properties of poly(vinyl alcohol) (PVA)-agar films were reported. PVA-agar films were prepared by solution cast method, and the addition of GLY in PVA-agar films altered the optical properties, resulting in a decrease in opacity values and in the color difference (ΔE) of the films. Structural characterization using Fourier transformation infrared (FTIR) spectroscopy and X-ray diffraction (XRD) indicated that the presence of GLY altered the intensity of the bands (from 1200 to 800cm(-1)) and crystallinity. The characterization of the thermal properties indicated that an increase in the agar content produces a decrease in the melting temperature and augments the heat of fusion. Similar tendencies were observed in plasticized films, but at different magnification. The formulation that demonstrated the lowest mechanical properties contained 25wt.% agar, whereas the formulation that contained 75wt.% agar demonstrated a significant improvement. The water vapor transmission rate (WVTR) and surface morphology analysis demonstrated that the structure of PVA-agar films is reorganized upon GLY addition. The physicochemical properties of PVA-agar films using GLY as a plasticizer provide information for the application of this formulation as packaging material for specific food applications. PMID:24875313

  18. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-01-22

    In this work, we report the successful fabrication of agar-based nanofibers by electrospinning technique, using water as solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operating at 50°C, to avoid agar gelation. Agar pure solution (1 wt%) showed inadequate spinnability regardless of the used electrospinning conditions. The addition of a co-blending polymer such as PVA (10 wt% starting solution) improved the solutions viscoelasticity and hence, the solutions spinnability. Agar/PVA solutions were prepared with different mass ratios (100/0, 50/50, 40/60, 30/70, 20/80 and 0/100) and electrospun at various sets of electrospinning conditions. Best nanofibers were obtained with 30/70 and 20/80 agar/PVA blends while samples with higher agar contents (50/50 and 40/60 agar/PVA) were harder to process and led to discontinuous fibrous mats. This first set of encouraging results can open a new window of opportunities for agar-based biomaterials in the form of nanofibers. PMID:25439904

  19. Inhibition of Streptococcus mutans strains by different mitis-salivarius agar preparations.

    PubMed Central

    Staat, R H

    1976-01-01

    Several Streptococcus mutans strains were markedly inhibited by mitis-salivarius agar manufactured by Baltimore Biological Laboratories, but little, if any, inhibition was noted using Difco Laboratories' mitis-salivarius agar. Supplementation of the basic medium with sucrose and bacitracin for specific selection of S. mutans resulted in suppression of representative S. mutans type a strains regardless of manufacturer. PMID:1270597

  20. Effects of season on the yield and quality of agar from Gracilaria species (Gracilariaceae, Rhodophyta).

    PubMed

    Marinho-Soriano, E; Bourret, E

    2003-12-01

    The effect of season on yield and physical properties of agars extracted from Gracia gracilis and G. bursa-pastoris were determined. The agar yield from G. gracilis was maximum during spring (30%) and minimum during autumn (19%). In G. bursa-pastoris, the agar yield was greatest in summer (36%) and lowest in winter (23%). Agar yield from G. bursa-pastoris was positively correlated with temperature (r=0.94; P<0.01) and salinity (r=0.97; P<0.01) and negatively with nitrogen content (r=-0.93; P<0.01). Agar gel strengths fluctuated from 229 to 828 gcm(-2) and 23 to 168 gcm(-2) for G. gracilis and G. bursa-pastoris, respectively. The gelling temperature showed significant seasonal variation for both species. Chemical analysis of agar from the two seaweeds indicated variation in 3,6-anhydrogalactose and sulfate content (P<0.01). Furthermore, there was an inverse correlation between the two chemical variables. In general, agar extracted from G. gracilis possessed better qualities than agar extracted from G. bursa-pastoris and can be considered a candidate for industrial use. PMID:14575957

  1. Agar composition affects in vitro screening of biocontrol activity of antagonistic microorganisms.

    PubMed

    Bosmans, L; De Bruijn, I; De Mot, R; Rediers, H; Lievens, B

    2016-08-01

    Agar-based screening assays are the method of choice when evaluating antagonistic potential of bacterial biocontrol-candidates against pathogens. We showed that when using the same medium, but different agar compositions, the activity of a bacterial antagonist against Agrobacterium was strongly affected. Consequently, results from in vitro screenings should be interpreted cautiously. PMID:27166668

  2. Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties.

    PubMed

    Jumaidin, R; Sapuan, S M; Jawaid, M; Ishak, M R; Sahari, J

    2016-08-01

    The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc. PMID:27177458

  3. Efficacy of agar-plate culture in detection of Strongyloides stercoralis infection.

    PubMed

    Arakaki, T; Iwanaga, M; Kinjo, F; Saito, A; Asato, R; Ikeshiro, T

    1990-06-01

    Agar-plate culture of feces using a modified petri dish proved to be highly efficient in the detection of Strongyloides stercoralis infection. Furrows left by S. stercoralis on the agar plate were distinguished readily in size from those left by Necator americanus. PMID:2352073

  4. Toward noninvasive assessment of flap viability with time-resolved diffuse optical tomography: a preclinical test on rats

    NASA Astrophysics Data System (ADS)

    Di Sieno, Laura; Bettega, Georges; Berger, Michel; Hamou, Cynthia; Aribert, Marion; Mora, Alberto Dalla; Puszka, Agathe; Grateau, Henri; Contini, Davide; Hervé, Lionel; Coll, Jean-Luc; Dinten, Jean-Marc; Pifferi, Antonio; Planat-Chrétien, Anne

    2016-02-01

    The noninvasive assessment of flap viability in autologous reconstruction surgery is still an unmet clinical need. To cope with this problem, we developed a proof-of-principle fully automatized setup for fast time-gated diffuse optical tomography exploiting Mellin-Laplace transform to obtain three-dimensional tomographic reconstructions of oxy- and deoxy-hemoglobin concentrations. We applied this method to perform preclinical tests on rats inducing total venous occlusion in the cutaneous abdominal flaps. Notwithstanding the use of just four source-detector couples, we could detect a spatially localized increase of deoxyhemoglobin following the occlusion (up to 550 μM in 54 min). Such capability to image spatio-temporal evolution of blood perfusion is a key issue for the noninvasive monitoring of flap viability.

  5. Toward noninvasive assessment of flap viability with time-resolved diffuse optical tomography: a preclinical test on rats.

    PubMed

    Di Sieno, Laura; Bettega, Georges; Berger, Michel; Hamou, Cynthia; Aribert, Marion; Mora, Alberto Dalla; Puszka, Agathe; Grateau, Henri; Contini, Davide; Hervé, Lionel; Coll, Jean-Luc; Dinten, Jean-Marc; Pifferi, Antonio; Planat-Chrétien, Anne

    2016-02-01

    The noninvasive assessment of flap viability in autologous reconstruction surgery is still an unmet clinical need. To cope with this problem, we developed a proof-of-principle fully automatized setup for fast time-gated diffuse optical tomography exploiting Mellin-Laplace transform to obtain three-dimensional tomographic reconstructions of oxy- and deoxy-hemoglobin concentrations. We applied this method to perform preclinical tests on rats inducing total venous occlusion in the cutaneous abdominal flaps. Notwithstanding the use of just four source-detector couples, we could detect a spatially localized increase of deoxyhemoglobin following the occlusion (up to 550 μM in 54 min). Such capability to image spatio-temporal evolution of blood perfusion is a key issue for the noninvasive monitoring of flap viability. PMID:26836208

  6. [Evaluation of a new medium, eggplant (Solanum melongena) agar as a screening medium for Cryptococcus neoformans in environmental samples].

    PubMed

    Sengul, Mustafa; Ergin, Cağrı; Kartal, Tuğba

    2014-04-01

    Cryptococcus neofomans is an encapsulated yeast-like fungus that causes life-threatening infections, especially in immunosuppresive patients. C.neoformans infection is believed to be acquired via inhalation of aerosolized particles from the environment. Avian guano, decaying tree hollows and soil are the related known environmental niches. Brown pigmented yeast growth from the precursors in growth media is an important step for the identification and isolation of C.neoformans. Seeds of plants in nature are preferred owing to easy accessibility and low costs for the preparation of such media. Guizotia abysinicca (Niger seed) as Staib agar, Helianthus annus (Sunflower) as Pal's medium, Brassica nigra (Mustard) agar, tobacco agar, Mucuna pruriens (Velvet bean) seed agar, Perilla frutescens (Beefsteak plant) seed agar, Rubus fruticosus (Blackberry) agar and ground red hot pepper agar are pigment-based selective media for the differentiation of C.neoformans. The aim of this study was to observe the pigment production of C.neoformans in a new medium based on eggplant (Solanum melongena) and also to compare its performance with the simplified Staib, Pal's and tobacco agar for isolation from the environment. Three different eggplant-based medium (S.melongena Melanzaza viserba, S.melongena Pinstripe F1 and S.ovigerum Ivory F1) were included in the study. Pigment-forming eggplant medium, simplified Staib agar, Pal's agar and tobacco agar were used for the cultivation of the environmental swabbed samples from 19 Eucalyptus camaldulensis trunk hollows in continuous colonization region. While pigment formation were observed with S.melongena Melanzaza viserba and S.melongena Pinstripe F1 containing media, S.ovigerum Ivory F1 medium was found to be non-reactive. In colonization area (Gökova-Akyaka, Turkey), 11 (57.9%) out of 19 E.camaldulensis samples were positive with simplified Staib agar, Pal's agar and eggplant agar while 10 (52.6%) of them are positive with tobacco agar. C

  7. Evaluation of agar dilution and broth microdilution methods to determine the disinfectant susceptibility.

    PubMed

    Wu, Guoyan; Yang, Qianru; Long, Mei; Guo, Lijuan; Li, Bei; Meng, Yue; Zhang, Anyun; Wang, Hongning; Liu, Shuliang; Zou, Likou

    2015-11-01

    A variety of disinfectants have been widely used in veterinary hygiene, food industries and environments, which could induce the development of bacterial resistance to disinfectants. The methods used to investigate antimicrobial effects of disinfectant vary considerably among studies, making comparisons difficult. In this study, agar dilution and broth microdilution methods were used to compare the antimicrobial activities of four quaternary ammonium compounds (QACs) against foodborne and zoonotic pathogens. The potential relationship between the presence of QACs resistance genes and phenotypic resistance to QACs was also investigated. Our results indicated that the minimum inhibitory concentrations (MICs) determined by two methods might be different depended upon different QACs and bacteria applied. Regardless of the testing methods, Klebsiella pneumoniae was more tolerant among Gram-negative strains to four QACs, followed by Salmonella and Escherichia coli. The agreement between MICs obtained by the two methods was good, for benzalkonium chloride (78.15%), didecyldimethylammonium chloride (DDAC) (82.35%), cetylpyridinium chloride (CTPC) (97.48%) and cetyltrimethylammonium bromide (CTAB) (99.16%), respectively. Among all Gram-negative bacteria, 94.55% (n=52) of qacEΔ1-positive strains showed higher MICs (512 mg l(-1)) to CTAB. The qacEΔ1 gene was highly associated (P<0.05) with the high MICs of QACs (⩾512 mg l(-1)). In addition, DDAC remained as the most effective disinfectant against both Gram-positive and Gram-negative bacteria. This is the first study that compared the agar dilution and broth microdilution methods to assess the antimicrobial activity of QACs. The study demonstrated the need to standardize method that would be used in evaluating QACs antimicrobial properties in the future. PMID:25944532

  8. Design and testing of diffuse reflectance sensor for continuous monitoring of cutaneous blood perfusion

    NASA Astrophysics Data System (ADS)

    Zakharov, P.; Talary, M. S.; Caduff, A.

    2009-07-01

    A dual-wavelength reflectance optical sensor for monitoring cutaneous blood perfusion is presented as a part of multisensor glucose monitoring system. A Monte-Carlo simulation of partial differential pathlengths has been used for the optimization of the distance from light source to detector. The simulation indicated that the light pathlength within the upper vascularised skin layers increases before reaching saturation at separation distances larger than 3 mm. Thus the sensor sensitivity does not benefit from larger source-detector distances. At the same time with a higher separation of the detector from the source, the intensity exponentially decreases while undesirable sensitivity to the muscle perfusion increases. The hardware prototype has been developed based on the simulation findings and tested in a laboratory setting and in a home use study by patients with diabetes. For both testing procedures the optical sensor demonstrated high sensitivity to perfusion changes. The effect of initial cutaneous blood increase under the sensor has been observed which can be associated with pressure-induced vasodilation as a response to the sensor application.

  9. Evaluation of Five Chromogenic Agar Media and the Rosco Rapid Carb Screen Kit for Detection and Confirmation of Carbapenemase Production in Gram-Negative Bacilli

    PubMed Central

    Gilmour, Matthew W.; DeGagne, Pat; Nichol, Kim; Karlowsky, James A.

    2014-01-01

    An efficient workflow to screen for and confirm the presence of carbapenemase-producing Gram-negative bacilli was developed by evaluating five chromogenic screening agar media and two confirmatory assays, the Rapid Carb screen test (Rosco Diagnostica A/S, Taastrup, Denmark) and the modified Hodge test. A panel of 150 isolates was used, including 49 carbapenemase-producing isolates representing a variety of β-lactamase enzyme classes. An evaluation of analytical performance, assay cost, and turnaround time indicated that the preferred workflow (screening test followed by confirmatory testing) was the chromID Carba agar medium (bioMérieux, Marcy l'Étoile, France), followed by the Rapid Carb screen test, yielding a combined sensitivity of 89.8% and a specificity of 100%. As an optional component of the workflow, a determination of carbapenemase gene class via molecular means could be performed subsequent to confirmatory testing. PMID:25355764

  10. Model for collisional fast ion diffusion into Tokamak Fusion Test Reactor loss cone

    SciTech Connect

    Chang, C.S. |; Zweben, S.J.; Schivell, J.; Budny, R.; Scott, S.

    1994-08-01

    An analytic model is developed to estimate the classical pitch angle scattering loss of energetic fusion product ions into prompt loss orbits in a tokamak geometry. The result is applied to alpha particles produced by deutrium-tritium fusion reactions in a plasma condition relevant to Tokamak Fusion Test Reactor (TFTR). A poloidal angular distribution of collisional fast ion loss at the first wall is obtained and the numerical result from the TRANSP code is discussed. The present model includes the effect that the prompt loss boundary moves away from the slowing-down path due to reduction in banana thickness, which enables us to understand, for the first time. the dependence of the collisional loss rate on Z{sub eff}.

  11. Identification of yeasts from clinical specimens by oxidase test.

    PubMed

    Kumar, S; Arora, B S; Mathur, M D

    2000-10-01

    A total of 100 yeasts and yeast like fungi isolates from clinical specimens were negative for oxidase production on Sabouraud dextrose agar. When grown on Columbia agar, chocolate agar, tryptose agar, Mueller-Hinton agar, brain heart infusion and a medium resembling Sabouraud's dextrose agar but with starch instead of dextrose, all the isolate of Candida albicans (55), C. guilliermondii (6), C. parapsilosis (14), C. tropicalis (6), C. pseudotropicalis (6) and Crytococcus neoformans (2) were positive for oxidase producation. Torulopsis glabrata (2), Saccharomyces cervisiae (2) and two out of seven isolates of C. krusei were negative for oxidase test. PMID:11344606

  12. Detection of Agar, by Analysis of Sugar Markers, Associated with Bacillus Anthracis Spores, After Culture

    SciTech Connect

    Wunschel, David S.; Colburn, Heather A.; Fox, Alvin; Fox, Karen F.; Harley, William M.; Wahl, Jon H.; Wahl, Karen L.

    2008-08-01

    Detection of small quantities of agar associated with spores of Bacillus anthracis could provide key information regarding its source or growth characteristics. Agar, widely used in growth of bacteria on solid surfaces, consists primarily of repeating polysaccharide units of 3,6-anhydro-L-galactose (AGal) and galactose (Gal) with sulfated and O-methylated galactoses present as minor constituents. Two variants of the alditol acetate procedure were evaluated for detection of potential agar markers associated with spores. The first method employed a reductive hydrolysis step, to stabilize labile anhydrogalactose, by converting to anhydrogalactitol. The second eliminated the reductive hydrolysis step simplifying the procedure. Anhydrogalactitol, derived from agar, was detected using both derivatization methods followed by gas chromatography-mass spectrometry (GC-MS) analysis. However, challenges with artefactual background (reductive hydrolysis) or marker destruction (hydrolysis) lead to the search for alternative sugar markers. A minor agar component, 6-O-methyl galactose (6-O-M gal), was readily detected in agar-grown but not broth-grown bacteria. Detection was optimized by the use of gas chromatography-tandem mass spectrometry (GC-MS-MS). With appropriate choice of sugar marker and analytical procedure, detection of sugar markers for agar has considerable potential in microbial forensics.

  13. Using the EZ-Diffusion Model to Score a Single-Category Implicit Association Test of Physical Activity

    PubMed Central

    Rebar, Amanda L.; Ram, Nilam; Conroy, David E.

    2014-01-01

    Objective The Single-Category Implicit Association Test (SC-IAT) has been used as a method for assessing automatic evaluations of physical activity, but measurement artifact or consciously-held attitudes could be confounding the outcome scores of these measures. The objective of these two studies was to address these measurement concerns by testing the validity of a novel SC-IAT scoring technique. Design Study 1 was a cross-sectional study, and study 2 was a prospective study. Method In study 1, undergraduate students (N = 104) completed SC-IATs for physical activity, flowers, and sedentary behavior. In study 2, undergraduate students (N = 91) completed a SC-IAT for physical activity, self-reported affective and instrumental attitudes toward physical activity, physical activity intentions, and wore an accelerometer for two weeks. The EZ-diffusion model was used to decompose the SC-IAT into three process component scores including the information processing efficiency score. Results In study 1, a series of structural equation model comparisons revealed that the information processing score did not share variability across distinct SC-IATs, suggesting it does not represent systematic measurement artifact. In study 2, the information processing efficiency score was shown to be unrelated to self-reported affective and instrumental attitudes toward physical activity, and positively related to physical activity behavior, above and beyond the traditional D-score of the SC-IAT. Conclusions The information processing efficiency score is a valid measure of automatic evaluations of physical activity. PMID:25484621

  14. Field tests of polyethylene-membrane diffusion samplers for characterizing volatile organic compounds in stream-bottom sediments, Nyanza Chemical Waste Dump Superfund site, Ashland, Massachusetts

    USGS Publications Warehouse

    Lyford, Forest P.; Willey, Richard E.; Clifford, Scott

    2000-01-01

    A plume of volatile organic compounds (VOCs) in ground water extends from the Nyanza Chemical Waste Dump Superfund site in Ashland, Massachusetts, northward toward a mill pond on the Sudbury River and eastward toward the Sudbury River and former mill raceway downstream from the mill pond. Polyethylene-membrane water-to-vapor (vapor) and water-to-water (water) diffusion samplers were installed January 1999 in bottom sediments along the Sudbury River and former mill raceway in a pilot study to determine if vapor samplers would be useful in this setting for delineating a plume of contaminants in ground water near the river and raceway, to evaluate equilibration time for vapor-diffusion samplers, and to determine if diffusion samplers might be an alternative to seepage meters (inverted steel drums) and sediment sampling for evaluating concentrations of VOCs in bottom sediments. Of five tested compounds (benzene, trichloroethene, toluene, tetrachloroethene, and chlorobenzene), chlorobenzene and trichloroethene were most frequently detected in vapor from vapor-diffusion samplers. The distribution of VOCs was generally consistent with a previously mapped plume of contaminants in ground water. The field evaluation of equilibration times for vapor-diffusion samplers was inconclusive because of changing hydrologic conditions that may have affected concentrations of VOCs, possible variations in concentrations ofVOCs over short distances, and imprecise sampling and analytical methods. The limited data, however, indicated that equilibration may require 3 weeks or more in some settings. VOCs detected in samples from water-diffusion samplers and their concentrations were comparable to results from seepage meters, and VOCs detected in vapor-diffusion samplers correlated with VOCs detected in water-diffusion samplers. These results indicate that either vapor-or water-diffusion samplers would serve as an economical alternative to seepage meters for sampling of VOCs in pore water

  15. Diffusion chamber system for testing of collagen-based cell migration barriers for separation of ligament enthesis zones in tissue-engineered ACL constructs.

    PubMed

    Hahner, J; Hoyer, M; Hillig, S; Schulze-Tanzil, G; Meyer, M; Schröpfer, M; Lohan, A; Garbe, L-A; Heinrich, G; Breier, A

    2015-01-01

    A temporary barrier separating scaffold zones seeded with different cell types prevents faster growing cells from overgrowing co-cultured cells within the same construct. This barrier should allow sufficient nutrient diffusion through the scaffold. The aim of this study was to test the effect of two variants of collagen-based barriers on macromolecule diffusion, viability, and the spreading efficiency of primary ligament cells on embroidered scaffolds. Two collagen barriers, a thread consisting of a twisted film tape and a sponge, were integrated into embroidered poly(lactic-co-caprolactone) and polypropylene scaffolds, which had the dimension of lapine anterior cruciate ligaments (ACL). A diffusion chamber system was designed and established to monitor nutrient diffusion using fluorescein isothiocyanate-labeled dextran of different molecular weights (20, 40, 150, 500 kDa). Vitality of primary lapine ACL cells was tested at days 7 and 14 after seeding using fluorescein diacetate and ethidium bromide staining. Cell spreading on the scaffold surface was measured using histomorphometry. Nuclei staining of the cross-sectioned scaffolds revealed the penetration of ligament cells through both barrier types. The diffusion chamber was suitable to characterize the diffusivity of dextran molecules through embroidered scaffolds with or without integrated collagen barriers. The diffusion coefficients were generally significantly lower in scaffolds with barriers compared to those without barriers. No significant differences between diffusion coefficients of both barrier types were detected. Both barriers were cyto-compatible and prevented most of the ACL cells from crossing the barrier, whereby the collagen thread was easier to handle and allowed a higher rate of cell spreading. PMID:26300365

  16. Polymer film deposition on agar using a dielectric barrier discharge jet and its bacterial growth inhibition

    NASA Astrophysics Data System (ADS)

    Tsai, T.-C.; Cho, J.; Mcintyre, K.; Jo, Y.-K.; Staack, D.

    2012-08-01

    Polymer film deposition on agar in ambient air was achieved using the helium dielectric barrier discharge jet (DBD jet) fed with polymer precursors, and the bacterial growth inhibition due to the deposited film was observed. The DBD jet with precursor addition was more efficient at sterilization than a helium-only DBD jet. On the areas where polymer films cover the agar the bacterial growth was significantly inhibited. The inhibition efficacy showed dependence on the film thickness. The DBD jet without precursor also created a modified agar layer, which may slow the growth of some bacterial strains.

  17. Development and application of a two-tier diagnostic test measuring college biology students' understanding of diffusion and osmosis after a course of instruction

    NASA Astrophysics Data System (ADS)

    Odom, Arthur Louis; Barrow, Lloyd H.

    This study involved the development and application of a two-tier diagnostic test measuring college biology students' understanding of diffusion and osmosis after a course of instruction. The development procedure had three general steps: defining the content boundaries of the test, collecting information on students' misconceptions, and instrument development. Misconception data were collected from interviews and multiple-choice questions with free response answers. The data were used to develop 12 two-tier multiple choice items in which the first tier examined content knowledge and the second examined understanding of that knowledge. The conceptual knowledge examined was the particulate and random nature of matter, concentration and tonicity, the influence of life forces on diffusion and osmosis, membranes, kinetic energy of matter, the process of diffusion, and the process of osmosis. The diagnostic instrument was administered to 240 students (123 non-biology majors and 117 biology majors) enrolled in a college freshman biology laboratory course. The students had completed a unit on diffusion and osmosis. The content taught was carefully defined by propositional knowledge statements, and was the same content that defined the content boundaries of the test. The split-half reliability was .74. Difficulty indices ranged from 0.23 to 0.95, and discrimination indices ranged from 0.21 to 0.65. Each item was analyzed to determine student understanding of, and identify misconceptions about, diffusion and osmosis.Received: 18 June 1993; Revised: 16 February 1994;

  18. Effect of heat treatment on the performance of tryptose-sulfite-cycloserine agar for enumeration of Clostridium perfringens.

    PubMed

    Brodsky, M H; Ciebin, B W

    1979-05-01

    Dissolving dehydrated tryptose-sulfite-cycloserine agar by only boiling or microwaving was found to inhibit Clostridium perfringens colony development in pour plates when compared with C. perfringens recovery in tryptose-sulfite-cycloserine agar prepared by autoclaving. PMID:225988

  19. Comparison of the antibacterial activity of an ozonated oil with chlorhexidine digluconate and povidone-iodine. A disk diffusion test.

    PubMed

    Montevecchi, Marco; Dorigo, Antonio; Cricca, Monica; Checchi, Luigi

    2013-07-01

    Ozonated oils are antiseptics obtained from the chemical reaction between ozone and unsaturated fatty acids of vegetable oils. The aim of this study was to investigate the antimicrobial effectiveness of a commercially available ozonated oil (O3-Oil), in comparison with 0.2% chlorhexidine digluconate (CHX) and 10% povidone-iodine (PVP-I) through a disk diffusion test. For each antiseptic a series of two-fold dilutions was made, obtaining seven dilutions: 1:2, 1:4, 1:8, 1:16, 1:32, 1:64 and 1:128. The undiluted antiseptics and the seven dilutions were tested against two freeze-dried bacterial strains: Staphylococcus aureus (Sa) and Porphyromonas gingivalis (Pg). O3-Oil showed significantly greater diameters of growth inhibition (p<0.01) than CHX and PVP-I in all dilutions for both tested strains. CHX lost any antibacterial efficacy when diluted more than 1:32. At the highest dilution, the diameters of growth inhibition against Sa were 20.67±0.58 mm and 15.33±0.58 mm, for O3-Oil and PVP-I, respectively. At the same dilution, the diameters of growth inhibition against Pg were: 19.00 mm for O3-Oil and 13.67±0.58 mm for PVP-I. The promising results obtained for the O3-Oil, against the opportunistic Sa, and Pg, one of the main periodontal pathogens, suggest its potential applicability for periodontal treatment. Further preclinical and clinical investigations are warranted. PMID:23912871

  20. Evaluation of Cesium, Strontium, and Lead Sorption, Desorption, and Diffusion in Cores from Western Pahute Mesa, Nevada Test Site, based on Macroscopic and Spectroscopic Investigations

    SciTech Connect

    Charalambos Papelis; Wooyong Um

    2003-03-01

    The interaction of radionuclides and other contaminants with minerals and other aquifer materials controls the rate of migration of these contaminants in groundwater. The stronger these interactions, the more a radionuclide will be retarded. Processes such as sorption and diffusion often control the migration of inorganic compounds in aquifers. These processes are often controlled by the nature of the ions of interest, the nature of the aquifer materials, and the specific geochemical conditions. Parameters describing sorption and diffusion of radionuclides and other inorganic ions on aquifer materials are used in transport codes to predict the potential for migration of these contaminants into the accessible environment. Sorption and diffusion studies can reduce the uncertainty of radionuclide transport modeling on the Nevada Test Site (NTS) and other nuclear testing areas.

  1. Fungistatic activity of flaxseed in potato dextrose agar and a fresh noodle system.

    PubMed

    Xu, Yingying; Hall, Clifford; Wolf-Hall, Charlene; Manthey, Frank

    2008-02-10

    Although numerous researchers have studied flaxseed as a food ingredient for its health benefits, flaxseed (Linum usitatissimum) has never been considered as a food preservative. The objective of this study was to investigate the effect of flaxseed flour (FF) concentration (0, 6, 9, 12, and 15% wt/wt), cultivar ('Omega' and brown) and source (four seed companies located in Minnesota and North Dakota) on flaxseed fungistatic activity. Fungal radial growth was used to assess the fungistatic activity of FF in both potato dextrose agar (PDA) medium and a fresh noodle system. Strains of Penicillium chrysogenum, Aspergillus flavus, Fusarium graminearum, and a Penicillium sp. isolated from molded noodles were used as the test microorganisms. Results showed that growth of F. graminearum was completely inhibited at all FF concentrations in PDA, and the inhibition of the other three test microorganisms increased with increasing FF concentrations. In the model noodle system, FF concentration at 9% or higher significantly reduced the mold count of fresh noodle during storage. In the inoculated noodle system, 6% FF addition was sufficient to significantly inhibit the growth of F. graminearum and A. flavus, whereas 9% FF concentrations showed fungistatic activity against P. chrysogenum and the Penicillium sp. isolate. Differences in the degree of mold inhibition were found among FFs obtained from different sources and cultivars. Results suggested that flaxseed possesses fungistatic activity and could be used as a multifunctional food ingredient. PMID:18077042

  2. Lung diffusion testing

    MedlinePlus

    ... as: Emphysema Interstitial fibrosis Pulmonary embolism Pulmonary hypertension Sarcoidosis Lung hemorrhage Asthma Risks There are no significant ... Read More Asbestosis Interstitial lung disease Lung disease Sarcoidosis Update Date 11/19/2015 Updated by: Denis ...

  3. Biological and chemical detection of fumonisins produced on agar medium by Fusarium verticillioides isolates collected from corn in Sohag, Egypt.

    PubMed

    Aboul-Nasr, M B; Obied-Allah, M R A

    2013-08-01

    Fusarium verticillioides (Sacc.) Nirenberg is among the most common Fusarium species corn pathogens worldwide, and has been recognized as a fumonisin B1 (FB1) and fumonisin B2 (FB2) producer. In the present work, extracts of 58 F. verticillioides isolates from corn samples collected from Sohag Governorate, Egypt, were tested for their biotoxicity and production of fumonisin toxins. Forty-four Fusarium verticillioides isolates out of 58 tested produced FB1 or FB1 and FB2 (15 and 29 isolates, respectively) on potato-sucrose agar medium, detected by TLC, whereas the other 14 isolates did not produce fumonisin toxins. HPLC crude extract analysis confirmed the results from TLC plates. Brine shrimp larvae as well as the Gram-negative bacteria Pseudomonas aeuroginosa showed low bio-sensitivity towards the F. verticillioides crude extract toxicity, whereas the Gram-positive bacteria Bacillus cereus and Bacillus subtilis, especially B. subtilis, showed higher sensitivity towards the tested Fusarium crude extracts. These results enabled us to bio-evaluate and chemically detect fumonisin mycotoxins using a simple agar medium technique. PMID:23760819

  4. [An oropharyngeal tularemia case diagnosed by the isolation of Francisella tularensis on human blood agar].

    PubMed

    Ozel, Gönül; Arslan, Ilker Burak; Yeşilyurt, Murat; Celebi, Bekir; Kılıç, Selçuk

    2010-10-01

    Tularemia which is a multisystem disease of humans and some animals, is endemic in North America, some parts of Europe and Asia. The causative agent, Francisella tularensis, is a fastidious gram-negative, intracellular bacterium which requires supplementation with sulphydryl compounds (cysteine, cystine, thiosulphate, isoVitaleX) for growth on common laboratory media. In this report, a case of oropharyngeal tularemia diagnosed by the isolation of the causative agent on non-selective-common microbiological agar, has been presented. The patient was from Yozgat located in central Anatolia where tularemia has not been reported so far. Forty-two years old male was admitted to the hospital with two weeks history of sudden onset fever, headache, generalized aches, sore throat, and cervical tender lump on the left. Physical examination revealed bilateral exudative tonsillitis and tender posterior cervical lymphadenopathy. He has been empirically treated with amoxicilin-clavulanic acid for 7 days with initial diagnosis of acute tonsillopharyngitis. However, he was admitted to the hospital since the symptoms persisted and swelling increased despite antibiotic therapy. Microscopical examination of the Gram and Ehrlich-Ziehl-Neelsen stained smears prepared from the surgically drained lymph node revealed PMNL, with no evidence of bacteria. Routine cultures of the lymph node material yielded growth of gram-negative coccobacilli only on human blood agar and the cultures were negative for pyogenic bacteria, acid-fast organisms and fungi. Pathologic examination of the drainage material revealed suppurative inflammation. Lymph node aspirate and serum samples of the patient together with the isolated strain were sent to reference laboratory for further investigation in accordance to the clinical and laboratory findings compatible with tularemia. The isolate was confirmed as F.tularensis by slide agglutination and direct immunofluorescence antibody tests, and identified as F

  5. A fresh liver agar substrate for rearing small numbers of forensically important blow flies (Diptera: Calliphoridae)

    USGS Publications Warehouse

    Gruner, Susan V.; Slone, Daniel H.

    2014-01-01

    Forensically important calliphorids can be reared on a mixture of beef liver and agar. Small pieces of meat, especially fresh or frozen beef liver, will desiccate in 2–6 h, but this simple-to-make feeding substrate remains moist for at least 12 h at 25 and 30°C without desiccation, even in small (5 g) amounts. We determined the survivorship of small numbers of Chrysomya megacephala (F.) (first-instar larvae to adult eclosion) raised on 5 g of liver agar and fresh beef liver. We found that all larvae raised on 5 g of liver died due to desiccation, but survivorship on 5 g of liver agar was equivalent to that on larger (50 g) pieces of either liver agar or beef liver.

  6. [Assessment of 2 automated microdilution techniques compared to an agar dilution method in determining sensitivity to fosfomycin in strains of carbapenem-resistant Pseudomonas aeruginosa].

    PubMed

    Gil-Romero, Yolanda; Regodón-Domínguez, Marta; Wilhelmi de Cal, Isabel; López-Fabal, Fátima; Gómez-Garcés, José Luis

    2016-01-01

    Carbapenems-resistance in Pseudomonas aeruginosa isolates has been widely reported. Fosfomycin has been shown to act synergistically with other antimicrobials. The agar dilution method was approved for susceptibility testing for fosfomycin and Pseudomonas aeruginosa. However, broth microdilution methods are the basis of systems currently used in clinical microbiology laboratories. The results of this study indicate that these methods are acceptable as susceptibility testing methods for fosfomycin against these organisms. PMID:26620604

  7. Test of multiscaling in a diffusion-limited-aggregation model using an off-lattice killing-free algorithm

    NASA Astrophysics Data System (ADS)

    Menshutin, Anton Yu.; Shchur, Lev N.

    2006-01-01

    We test the multiscaling issue of diffusion-limited-aggregation (DLA) clusters using a modified algorithm. This algorithm eliminates killing the particles at the death circle. Instead, we return them to the birth circle at a random relative angle taken from the evaluated distribution. In addition, we use a two-level hierarchical memory model that allows using large steps in conjunction with an off-lattice realization of the model. Our algorithm still seems to stay in the framework of the original DLA model. We present an accurate estimate of the fractal dimensions based on the data for a hundred clusters with 50 million particles each. We find that multiscaling cannot be ruled out. We also find that the fractal dimension is a weak self-averaging quantity. In addition, the fractal dimension, if calculated using the harmonic measure, is a nonmonotonic function of the cluster radius. We argue that the controversies in the data interpretation can be due to the weak self-averaging and the influence of intrinsic noise.

  8. Different antimicrobial susceptibility testing methods to detect ertapenem resistance in Enterobacteriaceae: VITEK2, MicroScan, Etest, disk diffusion, and broth microdilution.

    PubMed

    Lee, Miae; Chung, Hae-Sun

    2015-05-01

    We investigated different antimicrobial susceptibility testing methods to detect ertapenem resistance in Enterobacteriaceae. A total of 72 Enterobacteriaceae isolates were collected from a clinical microbiology laboratory of a tertiary university hospital, all of which were detected ertapenem resistance by the VITEK2 system. Bacterial identification and antimicrobial susceptibility were determined using the VITEK2. Ertapenem susceptibility test was performed using the MicroScan, Etest and a disk diffusion test. Ertapenem MICs were confirmed using the broth microdilution (BMD). Sensitivity, specificity, and positive and negative predictive values (PPV and NPV, respectively) of each method for the detection of ertapenem resistance were calculated. Carbapenemases and AmpC β-lactamase were screened using phenotypic methods. Among the 72 isolates, 20 isolates (27.8%) were resistant to ertapenem. Etest showed high sensitivity and specificity (85.0% and 88.5%, respectively) and excellent concordance with BMD. The disk diffusion test had the lowest sensitivity of 50.0%. The VITEK2 showed the lowest essential and categorical agreement (30.5% and 27.8%, respectively). The MicroScan showed relatively good agreement with BMD compared to the VITEK2. Most category disagreements were minor errors. There were 3 very major errors in both the MicroScan and disk diffusion test. Only 1 isolate was positive for carbapenemase screening test and all of the isolates were positive for AmpC screening test. In conclusion, the detection of ertapenem resistance in Enterobacteriaceae has limitations using routine testing such as an automated system or disk diffusion. Confirmation of results by an additional MIC test is recommended for accurate resistance results of ertapenem. PMID:25794901

  9. Determining Biology Student Teachers' Cognitive Structure on the Concept of "Diffusion" through the Free Word-Association Test and the Drawing-Writing Technique

    ERIC Educational Resources Information Center

    Kurt, Hakan; Ekici, Gülay; Aktas, Murat; Aksu, Özlem

    2013-01-01

    The aim of the current study is to investigate student biology teachers' cognitive structures related to "diffusion" through the free word-association test and the drawing-writing technique. As the research design of the study, the qualitative research method was applied. The data were collected from 44 student biology teachers. The free…

  10. Genome Sequence of the Agar-Degrading Marine Bacterium Alteromonadaceae sp. Strain G7

    PubMed Central

    Kwak, Min-Jung; Song, Ju Yeon; Kim, Byung Kwon; Chi, Won-Jae; Kwon, Soon-Kyeong; Choi, Soobeom; Chang, Yong-Keun

    2012-01-01

    Here, we present the high-quality draft genome sequence of the agar-degrading marine gammaproteobacterium Alteromonadaceae sp. strain G7, which was isolated from coastal seawater to be utilized as a bioresource for production of agar-derived biofuels. The 3.91-Mb genome contains a number of genes encoding algal polysaccharide-degrading enzymes such as agarases and sulfatases. PMID:23209220

  11. Low density, microcellular, dopable, agar/gelatin foams for pulsed power experiments

    SciTech Connect

    McNamara, W.F.; Aubert, J.H.

    1997-04-01

    Low-density, microcellular foams prepared from the natural polymers agar and gelatin have been developed for pulsed-power physics experiments. Numerous experiments were supported with foams having densities at or below 10 mg/cm{sup 3}. For some of the experiments, the agar/gelatin foam was uniformly doped with metallic elements using soluble salts. Depending on the method of preparation, cell sizes were typically below 10 microns and for one process were below 1.0 micron.

  12. Entrapment of α-Amylase in Agar Beads for Biocatalysis of Macromolecular Substrate

    PubMed Central

    Sharma, Manu; Sharma, Vinay; Majumdar, Dipak K.

    2014-01-01

    Attempts have been made to optimize immobilization parameters, catalytic property, and stability of immobilized α-amylase in agar. The work compares natural entrapment efficiency of agar with the ionotropically cross-linked agar hydrogel, with the advantage of easy scale-up and cost and time effectiveness. Beads prepared with 3% (w/v) agar and 75 mM calcium chloride and hardened for 20 minutes were selected for further studies on the basis of entrapment efficiency (80%) and physical stability. Following entrapment, pH and temperature optima of enzyme were shifted from 6 to 6.5 and 50 to 55°C, respectively. Michaelis constant (Km) for both free and entrapped enzymes remained the same (0.83%) suggesting no change in substrate affinity. However, Vmax⁡ of entrapped enzyme decreased ~37.5-fold. The midpoint of thermal inactivation for entrapped enzyme increased by 8 ± 1°C implying its higher thermal stability. The entrapped enzyme in calcium agar bead had an Ea value of 27.49 kcal/mol compared to 17.6 kcal/mol for free enzyme indicating increased stability on entrapment. Half-life of enzyme increased ~2.2 times after entrapment in calcium agar at 60°C indicating stabilization of enzyme. The reusability of beads was size dependent. Beads with diameter <710 μm were stable and could be reused for 6 cycles with ~22% loss in activity.

  13. Rapid detection of Clostridium perfringens: comparison of lactose sulfite broth with tryptose-sulfite-cycloserine agar.

    PubMed

    Neut, C; Pathak, J; Romond, C; Beerens, H

    1985-01-01

    The lactose sulfite (LS) medium recommended for the detection and identification of Clostridium perfringens in foods was compared with a reference method using tryptose-sulfite-cycloserine (TSC) agar for the enumeration of this organism in a variety of foods and food ingredients. C. perfringens was detected and enumerated in 17 of the 54 samples examined with LS broth, but its presence could be confirmed in only 9 of the samples with TSC agar. In only 2 instances, C. perfringens was detected on TSC agar but not in LS broth. A positive response (FeS + and gas +) in LS broth incubated at 46 degrees C always corresponded to the presence of C. perfringens; whereas the black colonies formed on TSC agar incubated at 37 degrees C were frequently found to be Clostridium species other than C. perfringens. Thus, because of its highly selective nature, LS broth was superior to TSC agar for enumerating and confirming the small numbers of C. perfringens that were present in a majority of the samples. This was especially true when other clostridia were also present. Besides its greater selectivity and sensitivity, LS broth had the additional advantages of requiring less work and giving confirmed results within 24-48 h compared with 3 days for the TSC agar method. PMID:2865247

  14. [GROWTH OF MICROMYCETES FROM DIFFERENT ECOLOGICAL NICHES ON AGAR NUTRIENT MEDIA].

    PubMed

    Kurchenko, I M; Yurieva, E M; Voychuk, S I

    2015-01-01

    Radial growth rate of (K(r)) 153 strains 6 species of micromycetes from different ecological niches was studied on 7 agar media: three standard (malt extract agar, potato-dextrose agar, Czapek's agar), and on agar media with plant polymers (carboxymethylcellulose, xylan, soluble starch and apple pectin). Endophytic and plant pathogenic strains (biotrophs) of all studied species did not differ significantly in their ability to grow on nutrient media of different composition--average values of K(r) for these two groups were the same (0,200 and 0,199 mm/h, respectively). Soil micromycetes (saprophytes) characterized by the lowest average growth rate (0,169 mm/h) and significantly differed from the endophytic and plant pathogenic ones. Average of the radial growth rates of studied microscopic fungi were higher on standard nutrient media than with plant polymers ones. Growth parameters of endophytes and plant pathogens of all studied species on various agar media differed from the soil strains. High growth rate of endophytic and plant pathogenic strains of Fusarium poae, Alternaria alternata and Ceratocystis sp. provides them the rapid colonization of plants. Penicillium funiculosum strains equally can exist as saprophytes in soil and as endophytic plant symbionts. A wide range of K(r) variation of endophytic dark pigmented Mycelia sterilia indicates the presence in this group of different species of micromycetes, which have no sporulation. PMID:26638483

  15. Optimization of modified Middlebrook 7H11 agar for isolation of Mycobacterium bovis from raw milk cheese.

    PubMed

    Forgrave, R; Donaghy, J A; Fisher, A; Rowe, M T

    2014-10-01

    Reports have highlighted the absence of contemporary peer reviewed publications pertaining to Mycobacterium bovis culture from raw milk and cheese. By replicating traditional methods, cheese-making methodology and equipment were devised to produce Cheddar (n = 6) and Caerphilly (n = 3) artificially contaminated with M. bovis (three genotypes) under stringent laboratory-containment guidelines for handling hazardous microbiological material. Middlebrook 7H11, modified for M. bovis isolation, was assessed for capacity to enumerate M. bovis despite changing cheese microflora and prolonged M. bovis exposure to the cheese matrix using maturing cheese test portions (n = 63; up to 16 weeks). Malachite green (MG) containing media isolated M. bovis at significantly (P < 0·05) lower levels than unmodified Middlebrook 7H11 agar despite MG being a common adjunct of Middlebrook 7H11 agar modified for M. bovis growth. Subsequently, a selective MG-free Middlebrook 7H11 agar modified using haemolysed red cells and calf serum was demonstrated as the best performing (P < 0·05) medium for recovery of M. bovis from typical UK cheese types, Cheddar and Caerphilly. Significance and impact of the study: Following increased M. bovis infection of UK cattle, the risk posed to consumers from consumption of unpasteurized milk and dairy products has changed. Furthermore, published methods for the culture and molecular detection of M. bovis in raw milk products are limited. Cheese-making protocols and M. bovis culture media reported here provide tools for further investigation of M. bovis survival during all stages of cheese manufacture and could inform future assessment of the risk to consumers from M. bovis contamination of unpasteurized dairy products. PMID:24888395

  16. Susceptibilities of genital mycoplasmas to the newer quinolones as determined by the agar dilution method.

    PubMed Central

    Kenny, G E; Hooton, T M; Roberts, M C; Cartwright, F D; Hoyt, J

    1989-01-01

    The increasing resistance of genital mycoplasmas to tetracycline poses a problem because tetracycline is one of the few antimicrobial agents active against Mycoplasma hominis, Ureaplasma urealyticum, chlamydiae, gonococci, and other agents of genitourinary-tract disease. Since the quinolones are a promising group of antimicrobial agents, the susceptibilities of M. hominis and U. urealyticum to the newer 6-fluoroquinolones were determined by the agar dilution method. Ciprofloxacin, difloxacin, and ofloxacin had good activity against M. hominis, with the MIC for 50% of isolates tested (MIC50) being 1 microgram/ml. Fleroxacin, lomefloxacin, pefloxacin, and rosoxacin had MIC50s of 2 micrograms/ml. Enoxacin, norfloxacin, and amifloxacin had MIC50s of 8 to 16 micrograms/ml, and cinoxacin and nalidixic acid were inactive (MIC50, greater than or equal to 256 micrograms/ml). Overall, the activities of 6-fluoroquinolones for ureaplasmas were similar to those for M. hominis, with MICs being the same or twofold greater. The most active 6-fluoroquinolones against ureaplasmas were difloxacin, ofloxacin, and pefloxacin, with MIC50s of 1 to 2 micrograms/ml. Ciprofloxacin was unusual in that the MIC50 for M. hominis was 1 microgram/ml, whereas the MIC50 for ureaplasmas was 8 micrograms/ml. Since the MIC50s for the most active quinolones approximate achievable concentrations in blood and urine, quinolones have promise in treating mycoplasmal infections. PMID:2712541

  17. Chemosensitivity measurements of human tumour cells by soft agar assays are influenced by the culture conditions.

    PubMed Central

    Endresen, L.; Tveit, K. M.; Rugstad, H. E.; Pihl, A.

    1985-01-01

    To investigate the influence of culture conditions on the in vitro responses of tumour cells to anticancer drugs, the sensitivities observed with the soft agar methods of Hamburger & Salmon (1977) (H-S) and of Courtenay & Mills (1978) (C-M) were compared. In all cases the ID50 values were determined from dose-response curves. Six human tumour cell lines exposed to 10 different agents, and 9 patients' melanomas exposed to 5 different agents, were examined. In the studies of cell lines the H-S method gave higher sensitivity values than the C-M method in 38 out of 52 cases, whereas in 14 cases the results were the same. In the patients' tumours the H-S method gave higher sensitivity in 21 of 35 cases, equal sensitivity in 11, and lower sensitivity in 3 cases. In many instances the ID50 values obtained with the two test systems differed by factors of 10 or more, both in the case of cell lines and tumour specimens. Systematic alterations in the culture conditions indicated that the presence or absence of rat erythrocytes is the most important factor responsible for the differences observed. Also, other factors, such as supplements (in the H-S method) and the use of different serum types, appeared to influence both colony growth and chemosensitivity. PMID:4005141

  18. Selective agars for the isolation of Streptococcus iniae from Japanese flounder, Paralichthys olivaceus, and its cultural environment.

    PubMed

    Nguyen, H T; Kanai, K

    1999-05-01

    Two kinds of selective agar were developed for the isolation of Streptococcus iniae, the causal agent of streptococcosis, from Japanese flounder (Paralichthys olivaceus) and from culture tanks in flounder farms. The selective agars were heart infusion agar with added thallium acetate and oxlinic acid (TAOA), and colistin sulphate and oxolinic acid (CSOA). For samples containing various bacterial flora, selective agars were supplemented with defibrinated horse blood in order to distinguish beta-haemolytic colonies of Strep. iniae. Streptococcus iniae was quantitatively isolated from the brain and kidney of diseased flounders in pure culture. Two-thirds of isolates picked up from selective blood agars inoculated with intestinal samples were identified as Strep. iniae. The bacterial colony numbers of deposits and water from culture tanks on selective blood agars were about 10-10(5) times smaller than those on control heart infusion agar; Strep. iniae was isolated from few deposit and water samples. PMID:10347871

  19. Field testing of passive diffusion bag samplers for volatile organic compound concentrations in ground water, Naval Industrial Reserve Ordnance Plant, Fridley, Minnesota, November 1999 and May 2000

    USGS Publications Warehouse

    Vroblesky, Don A.; Petkewich, Matthew D.

    2000-01-01

    Volatile organic compound concentrations from passive diffusion bag samplers were compared with concentrations from conventional purge (three or more casing volumes) sampling and low-flow purge sampling in side-by-side tests in 17 wells at the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. An initial comparison of 1,2-dichloroethene and trichloroethene concentrations obtained by using passive diffusion bag samplers and the conventional purge method in wells where one passive diffusion bag sampler was deployed showed good agreement at several wells but poor agreement at others. Collection of data from multiple diffusion samplers during the conventional purge sampling and during the low-flow sampling, however, suggests that the volatile organic compound concentrations from the passive diffusion bag samplers accurately reflect the volatile organic compound distribution in the screened interval, whereas the conventional purge and low-flow purge samples reflect mixing during pumping. The data also show that contaminant stratification was present in some wells. In one well, trichloroethene concentrations ranged from 470 to 1,600 micrograms per liter over a vertical distance of approximately 6 feet.

  20. Mass production of spores of lactic acid-producing Rhizopus oryzae NBRC 5384 on agar plate.

    PubMed

    Yamane, Tsuneo; Tanaka, Ryosuke

    2013-01-01

    Mass production of sporangiospores (spores) of Rhizopus oryzae NBRC 5384 (identical to NRRL 395 and ATCC 9363) on potato-dextrose-agar medium was studied aiming at starting its L(+)-lactic acid fermentation directly from spore inoculation. Various parameters including harvest time, sowed spore density, size of agar plate, height of air space, and incubation mode of plate (agar-on-bottom or agar-on-top) were studied. Ordinarily used shallow Petri dishes were found out to be unsuitable for the full growth of R. oryzae sporangiophores. In a very wide range of the sowed spore density, the smaller it was, the greater the number of the harvested spores was. It was also interesting to find out that R. oryzae grown downward vertically with a deep air space in an agar-on-top mode gave larger amount of spores than in an agar-on-bottom mode at 30°C for 7-day cultivation. Scale-up of the agar plate culture from 26.4 to 292 cm(2) was studied, resulting in the proportional relationship between the number of the harvested spores/plate and the plate area in the deep Petri dishes. The number of plates of 50 cm in diameter needed for 100 m(3) industrial submerged fermentation started directly from 2 × 10(5) spores/mL inoculum size was estimated as about 6, from which it was inferred that such a fermentation would be feasible. Designing a 50 cm plate and a method of spreading and collecting the spores were suggested. Bioprocess technological significance of the "full-scale industrial submerged fermentation started directly from spore inoculation omitting pre-culture" has been discussed. PMID:23658025

  1. Testing the Consistency of Diffusion Modelling in Multiple Crystal Phases: A Case Study from the Bishop Tuff, California

    NASA Astrophysics Data System (ADS)

    Morgan, D. J.; Chamberlain, K. J.; Wilson, C. J. N.

    2014-12-01

    Diffusion modelling of elemental gradients across compositional zones within crystals is frequently used to investigate timescales of various magmatic processes. In most cases, however, only a single crystal phase is used for this modelling. The ~0.76 Ma Bishop Tuff (Long Valley, eastern California) in later parts of its eruptive sequence has zoned orthopyroxene, quartz and sanidine. It thus provides an unusual opportunity to compare the modelled timescales from each phase, and assess the limitations of single-phase diffusion modelling in lower-temperature, rhyolitic volcanic systems. The presence of a late-stage compositionally distinct melt (the 'bright-rim' melt) mixing into the lower parts of the Bishop magma chamber has been noted by many authors [e.g. Wark et al. 2007, Geology 35, 235; Roberge et al. 2013, CMP 165, 237; Chamberlain et al. 2014, J Petrol 55, 395] in later-erupted material discharged from vents along the northern ring fracture of the caldera. Here we present the results of 1D diffusion modelling of Ba and Sr in sanidine, Ti in quartz and Fe-Mg interdiffusion in orthopyroxene in samples from later-erupted ignimbrite packages in the tuff. Timescales from diffusion modelling of Fe-Mg interdiffusion in orthopyroxene are <20 years; Ti in quartz <150 years and from Ba and Sr in sanidine <10000 years. The orders of magnitude variance between different crystal phases can be attributed to either distinct differences in the timing of interaction with the 'bright-rim' melt, or to uncertainties in the diffusion coefficient (orthopyroxene) and incorrect assumptions about the initial conditions for diffusion modelling (sanidine), or some combination of these factors. By combined modelling of Ba and Sr diffusion in sanidine the diffusion timescales are reduced to <1000 years, implying that interaction of the 'bright-rim' melt may have occurred over more extended timescales, and was not necessarily a direct eruptive trigger for the Bishop Tuff eruption. We

  2. Diffusion sampler testing at Naval Air Station North Island, San Diego County, California, November 1999 to January 2000

    USGS Publications Warehouse

    Vroblesky, Don A.; Peters, Brian C.

    2000-01-01

    Volatile organic compound concentrations in water from diffusion samplers were compared to concentrations in water obtained by low-flow purging at 15 observation wells at the Naval Air Station North Island, San Diego, California. Multiple diffusion samplers were installed in the wells. In general, comparisons using bladder pumps and diffusion samplers showed similar volatile organic carbon concentrations. In some wells, sharp concentration gradients were observed, such as an increase in cis-1,2-dichloroethene concentration from 100 to 2,600 micrograms per liter over a vertical distance of only 3.4 feet. In areas where such sharp gradients were observed, concentrations in water obtained by low-flow sampling at times reflected an average concentration over the area of influence; however, concentrations obtained by using the diffusion sampler seemed to represent the immediate vicinity of the sampler. When peristaltic pumps were used to collect ground-water samples by low-flow purging, the volatile organic compound concentrations commonly were lower than concentrations obtained by using diffusion samplers. This difference may be due to loss of volatiles by degassing under negative pressures in the sampling lines induced while using the peristaltic pump, mixing in the well screen, or possible short-circuiting of water from an adjacent depth. Diffusion samplers placed in buckets of freephase jet fuel (JP-5) and Stoddard solvent from observation wells did not show evidence of structural integrity loss during the 2 months of equilibration, and volatile organic compounds detected in the free-phase fuel also were detected in the water from the diffusion samplers.

  3. [Analysis of bactericidal material generated by electrical devices advertising bactericidal ability against bacteria on the agar gel plates].

    PubMed

    Nishimura, Hidekazu

    2012-11-01

    Several Japanese companies sell electrical devices advertised as effective in inactivating viruses and killing bacteria by releasing special materials, e.g., Plasmacluster ions, Nanoe particle and minus ions, into the air. These companies claim that their devices killed bacteria on plates in their own experiments. We tested device effectiveness using the same experiments from the Plasmacluster ioniser SHARP Co., Japan, the Nanoe generator Panasonic Co., Japan, and the Vion KING JIM Co., Japan, to test their advertising claims. Bactericidal ability on agar plate was tested, using Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus cereus, and Enterococcus faecalis as follows: the medium containing a certain amount of each bacterium was put onto an agar plate and smeared. Plates were kept in a closed chamber (inner volume 14.4 m3) or a glove box (inner volume 0.2 m), with one of the devices run for 2 hours. Plates not exposed to any device were used as controls. Each plate was retrieved and put in an incubator to count the number of bacterial colonies formed on the plate. There was no significant difference in the number of colonies on plates exposed to devices compared to control, in the number for all devices, or in all bacteria tested in experiments in the 14.4 m3 chamber. These results strongly suggest that these devices have almost no bactericidal effect, at least in space exceeding this volume. Colony formation was suppressed in the glove box in all devices and in all bacteria tested except P. aeruginosa, although the degree of suppression differed among experiments. The colony formation suppression mechanism was analyzed, and indicated that:colony formation did not change even after the removal of Plasmacluster ions, Nanoe particles, or negative ions from the air, while colony formation was decreased drastically by the removal of ozone from space, which was revealed to be generated inevitably during device operation. These results strongly suggest that the

  4. Determination of in vitro synergy for dual antimicrobial therapy against resistant Neisseria gonorrhoeae using Etest and agar dilution.

    PubMed

    Wind, Carolien M; de Vries, Henry J C; van Dam, Alje P

    2015-03-01

    In response to antimicrobial resistance of Neisseria gonorrhoeae to last-resort extended-spectrum cephalosporins, combination therapy of azithromycin+ceftriaxone is now recommended. Dual therapy can be effective to treat monoresistant strains as well as multidrug-resistant strains, preferably employing the effect of in vitro synergy. As reports on in vitro synergy of azithromycin+ceftriaxone in N. gonorrhoeae are conflicting, in this study an evaluation of this combination was performed using a cross-wise Etest method and agar dilution. Synergy was defined as a fractional inhibitory concentration index (FICI) of ≤0.5. To identify other dual treatment options for gonorrhoea, in vitro synergy was evaluated for 65 dual antimicrobial combinations using Etest. Azithromycin, cefixime, ceftriaxone, colistin, ertapenem, fosfomycin, gentamicin, minocycline, moxifloxacin, rifampicin, spectinomycin and tigecycline were screened for synergy in all possible combinations. No synergy or antagonism was found for any of the 65 combinations. The geometric mean FICI ranged from 0.82 to 2.00. The mean FICI of azithromycin+ceftriaxone was 1.18 (Etest) and 0.55 (agar dilution). The difference between both methods did not result in a difference in interpretation of synergy. Ceftriaxone-resistant strain F89 was tested in all combinations and no synergy was found for any of them. Most importantly, the ceftriaxone minimum inhibitory concentration of F89 was not decreased below the breakpoint with any concentration of azithromycin. PMID:25532741

  5. Malt-yeast extract-sucrose agar, a suitable medium for enumeration and isolation of fungi from silage.

    PubMed Central

    Skaar, I; Stenwig, H

    1996-01-01

    A general medium named malt-yeast extract-sucrose agar (MYSA) containing oxgall was designed. The medium was intended for the enumeration and isolation of molds and yeasts in routine examinations of animal feed stuffs. In this study MYSA was tested as a general medium for mycological examination of silage. The medium was compared with dichloran-rose bengal medium (DRBC) in an examination of more than 500 specimens of big bale grass silage. Selected characteristics of known fungal species commonly isolated from feeds were examined after growth on MYSA and DRBC and on malt extract agar, used as a noninhibitory control medium. MYSA suppressed bacterial growth, without affecting the growth of fungi common in feeds. The fungi growing on MYSA were easily recognized, and the medium seemed to slow radial growth of fungal colonies, which permitted, easy counting. The number of species found was higher on MYSA than on DRBC. When we compared MYSA with DRBC for mycological examination of grass silage samples, MYSA was found to be the medium of choice. PMID:8837416

  6. Characterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose.

    PubMed

    Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2014-09-22

    Crystallized nanocellulose (CNC) was separated from paper-mulberry (Broussonetia kazinoki Siebold) bast pulp by sulfuric acid hydrolysis method and they were blended with agar to prepare bionanocomposite films. The effect of CNC content (1, 3, 5 and 10 wt% based on agar) on the mechanical, water vapor permeability (WVP), and thermal properties of the nanocomposites were studied. Changes of the cellulose fibers in structure, morphology, crystallinity, and thermal properties of the films were evaluated using FT-IR, TEM, SEM, XRD, and TGA analysis methods. The CNC was composed of fibrous and spherical or elliptic granules of nano-cellulose with sizes of 50-60 nm. Properties of agar film such as mechanical and water vapor barrier properties were improved significantly (p<0.05) by blending with the CNC. The tensile modulus and tensile strength of agar film increased by 40% and 25%, respectively, in the composite film with 5 wt% of CNC, and the WVP of agar film decreased by 25% after formation of nanocomposite with 3 wt% of CNC. The CNC obtained from the paper-mulberry bast pulp can be used as a reinforcing agent for the preparation of bio-nanocomposites, and they have a high potential for the development of completely biodegradable food packaging materials. PMID:24906782

  7. Novel grafted agar disks for the covalent immobilization of β-D-galactosidase.

    PubMed

    Wahba, Marwa I; Hassan, Mohamed E

    2015-12-01

    Novel grafted agar disks were prepared for the covalent immobilization of β-D-galactosidase (β-gal). The agar disks were activated through reacting with ethylenediamine or different molecular weights of Polyethyleneimine (PEI), followed by glutaraldehyde (GA). The modification of the agar gel and the binding of the enzyme were verified by Fourier Transform Infrared (FTIR) and elemental analysis. Moreover, the agar's activation process was optimized, and the amount of immobilized enzyme increased 3.44 folds, from 38.1 to 131.2 U/g gel, during the course of the optimization process. The immobilization of β-gal onto the activated agar disks caused its optimum temperature to increase from 45°C to 45-55°C. The optimum pH of the enzyme was also shifted towards the acidic side (3.6-4.6) after its immobilization. Additionally, the Michaelis-Menten constant (Km ) increased for the immobilized β-gal as compared to its free counterpart whereas the maximum reaction rate (Vmax ) decreased. The immobilized enzyme was also shown to retain 92.99% of its initial activity after being used for 15 consecutive times. PMID:26043937

  8. Strategies to improve the mechanical strength and water resistance of agar films for food packaging applications.

    PubMed

    Sousa, Ana M M; Gonçalves, Maria P

    2015-11-01

    Agar films possess several properties adequate for food packaging applications. However, their high cost-production and quality variations caused by physiological and environmental factors affecting wild seaweeds make them less attractive for industries. In this work, native (NA) and alkali-modified (AA) agars obtained from sustainably grown seaweeds (integrated multi-trophic aquaculture) were mixed with locust bean gum (LBG) to make 'knife-coated' films with fixed final concentration (1 wt%) and variable agar/LBG ratios. Agar films were easier to process upon LBG addition (viscosity increase and gelling character decrease of the film-forming solutions observed by dynamic oscillatory and steady shear measurements). The mechanical properties and water resistance were optimal for films with 50 and/or 75% LBG contents and best in the case of NA (cheaper to extract). These findings can help reduce the cost-production of agar packaging films. Moreover, the controlled cultivation of seaweeds can provide continuous and reliable feedstock for transformation industries. PMID:26256341

  9. Effects of shape and size of agar gels on heating uniformity during pulsed microwave treatment.

    PubMed

    Soto-Reyes, Nohemí; Temis-Pérez, Ana L; López-Malo, Aurelio; Rojas-Laguna, Roberto; Sosa-Morales, María Elena

    2015-05-01

    Model gel systems with different shape (sphere, cylinder, and slab) and size (180 and 290 g) were prepared with agar (5%) and sucrose (5%). Dielectric constant (ε'), loss factor (ε"), thermophysical properties, and temperature distribution of the model system were measured. Each agar model system was immersed and suspended in water, and then, heated in a microwave oven with intermittent heating until the core temperature reached 50 °C. The ε' and ε" of agar gels decreased when frequency increased. The density and thermal conductivity values of the agar gels were 1033 kg/m(3) and 0.55 W/m °C, respectively. The temperature distribution of sphere, cylinder, and slab was different when similar power doses were applied. The slab reached 50 °C in less time (10 min) and showed a more uniform heating than spheres and cylinders in both sizes. Agar model systems of 180 g heated faster than those of 290 g. The coldest point was the center of the model systems in all studied cases. Shape and size are critical food factors that affect the heating uniformity during microwave heating processes. PMID:25827444

  10. Cost-effective nanoporous Agar-Agar polymer/Nickel powder composite particle for effective bio-products adsorption by expanded bed chromatography.

    PubMed

    Asgari, Setareh; Jahanshahi, Mohsen; Rahimpour, Ahmad

    2014-09-26

    In the present work a novel kind of dense nanoporous composite matrix for expanded bed application has been successfully first prepared with Nickel powder as a densifier and was covered with Agar-Agar layer as a skeleton, through the method of water-in-oil emulsification. Agar-Agar is a porous and inexpensive polymer. In order to fabricate cost-effective adsorbent with favorable qualities Agar-Agar polymer was used. Thereafter, the customized composite particle was modified by pseudo-affinity dye-ligand, Reactive Blue 4 (RB4), aimed at preparing a pseudo-affinity adsorbent (RB4-Agar-Ni) for bioprodut adsorption from aqueous solution. Bovine Serum Albumin (BSA) was selected as a model protein to investigate the adsorption behavior in batchwise and expanded bed chromatography, and the obtained results were evaluated with that of Streamline™ (Amersham-Pharmacia Biotech, Sweden). Spherical appearance and porous structure of composite particles were observed by the optical microscope (OM) and scanning electronic microscope (SEM). The results suggested that the matrices followed the logarithmic normal size distribution with the range of 65-300 μm and average diameter of 126.81-151.47 μm, proper wet density of 1.64-2.78 g/ml, water content of 62.74-34%, porosity of 98-90% and pore size of about 38-130 nm. For better comprehension of the impact of solid phase properties on the performance of the expanded bed, the expansion and hydrodynamic properties of a composite matrix with a series of densities was evaluated and estimated by the retention time distribution method (RTD) in an expanded bed and was compared with that of other matrices. According to obtained results the expansion factors under the same fluid velocity decreased by increasing the matrix density. Moreover, the axial dispersion coefficient (Dax) is the most appropriate parameter for evaluating the stability of expanded bed, on various operating conditions, such as different flow velocity, bed expansion

  11. Simple protocol for secondary school hands-on activity: Electrophoresis of pre-stained nucleic acids on agar-agar borate gels.

    PubMed

    Britos, Leticia; Goyenola, Guillermo; Oroño, Silvia Umpiérrez

    2004-09-01

    An extremely simple, inexpensive, and safe method is presented, which emulates nucleic acids isolation and electrophoretic analysis as performed in a research environment, in the context of a secondary school hands-on activity. The protocol is amenable to an interdisciplinary approach, taking into consideration the electrical and chemical parameters of the electrophoretic system. Furthermore, the laboratory is framed in a more comprehensive pedagogical setting, which addresses the methodological aspects of a pivotal scientific enterprise such as the Human Genome Project. In this setting, the hands-on activity is complemented with animations, paper models, and discussions. Additionally, our results indicate that the use of borate buffer and agar-agar gels suits many of the experiments included in college-level laboratory activities, which currently make use of more expensive agarose gels and TBE or TAE buffers. PMID:21706751

  12. Comparison of a new, bismuth-iron-sulfite-cycloserine agar for isolation of Clostridium perfringens with the tryptose-sulfite-cycloserine and blood agars.

    PubMed

    Gubash, S M; Ingham, L

    1997-02-01

    A new differential and selective, bismuth-iron-sulfite-cycloserine (BISC) medium, for isolation and enumeration of Clostridium perfringens from food and feces, was developed. The medium was compared with the widely-used tryptose-sulfite-cycloserine (TSC) medium and blood agar (BA) in recovering actively growing cells, cold- (refrigerated and frozen) stressed, and heat-stressed C. perfringens cells, and heat-activated spores from human feces. Both selective media were satisfactory in recovering actively growing cells and heat-activated spores of C. perfringens. Both were inferior to non-inhibitory blood agar in recovering heat or cold-stressed cells. The advantages of the new BISC medium over the TSC medium were: elimination of the need to prepare pour- or overlay-agar plates, which simplified inoculation of specimens on the medium and simplified the subcultures of colonies for confirmatory identification. All colonies of C. perfringens developed on BISC were black or dark gray. This was contrary to TSC medium, which gave, on average, 39.6% of white colonies when inoculated with the pure cultures of C. perfringens. PMID:9084113

  13. Extracellular enzyme production and cheating in Pseudomonas fluorescens depend on diffusion rates

    PubMed Central

    Allison, Steven D.; Lu, Lucy; Kent, Alyssa G.; Martiny, Adam C.

    2014-01-01

    Bacteria produce extracellular enzymes to obtain resources from complex chemical substrates, but this strategy is vulnerable to cheating by cells that take up reaction products without paying the cost of enzyme production. We hypothesized that cheating would suppress enzyme production in co-cultures of cheater and producer bacteria, particularly under well-mixed conditions. To test this hypothesis, we monitored protease expression and frequencies of Pseudomonas fluorescens producer and cheater genotypes over time in mixed liquid cultures and on agar plates. In mixed culture inoculated with equal frequencies of cheaters and producers, enzyme concentration declined to zero after 20 days, consistent with our hypothesis. We observed a similar decline in cultures inoculated with producers only, suggesting that cheater mutants arose de novo and swept the population. DNA sequencing showed that genetic changes most likely occurred outside the protease operon. In one experimental replicate, the population regained the ability to produce protease, likely due to further genetic changes or population dynamics. Under spatially structured conditions on agar plates, cheaters did not sweep the population. Instead, we observed a significant increase in the variation of enzyme activity levels expressed by clones isolated from the population. Together these results suggest that restricted diffusion favors a diversity of enzyme production strategies. In contrast, well-mixed conditions favor population sweeps by cheater strains, consistent with theoretical predictions. Cheater and producer strategies likely coexist in natural environments with the frequency of cheating increasing with diffusion rate. PMID:24782855

  14. [DNA and chemical analyses of commercial fly agaric-related products].

    PubMed

    Maruyama, Takuro; Kawahara, Nobuo; Fukiharu, Toshimitsu; Yokoyama, Kazumasa; Makino, Yukiko; Goda, Yukihiro

    2005-04-01

    Since June 6, 2002, psilocin and psilocybin-containing fungi (commonly called "magic mushrooms") have been regulated by the Narcotics and Psychotropics Control Law in Japan. However, various fly agaric-related products are now entering the Japanese market via the internet. In this study, fly agaric-related products available in this way were investigated for raw materials by DNA analysis and for additives by chemical analysis. Nucleotide sequence analysis of the mitochondrial 12S rDNA region suggested that these fly agaric-related products originate from A. muscaria or A. muscaria var. persicina. Furthermore, they were classified into three strains based on the ITS2-LSU nucleotide sequence. Harmine derivatives and/or tryptamine derivatives were detected in some of these products by LC/MS analysis. In accordance with this, the matK gene of Peganum harmala was found in all of the harmine derivative-containing samples. PMID:16018591

  15. Homogeneous Matrix Deposition on Dried Agar for MALDI Imaging Mass Spectrometry of Microbial Cultures

    NASA Astrophysics Data System (ADS)

    Hoffmann, Thomas; Dorrestein, Pieter C.

    2015-11-01

    Matrix deposition on agar-based microbial colonies for MALDI imaging mass spectrometry is often complicated by the complex media on which microbes are grown. This Application Note demonstrates how consecutive short spray pulses of a matrix solution can form an evenly closed matrix layer on dried agar. Compared with sieving dry matrix onto wet agar, this method supports analyte cocrystallization, which results in significantly more signals, higher signal-to-noise ratios, and improved ionization efficiency. The even matrix layer improves spot-to-spot precision of measured m/z values when using TOF mass spectrometers. With this technique, we established reproducible imaging mass spectrometry of myxobacterial cultures on nutrient-rich cultivation media, which was not possible with the sieving technique.

  16. Growth kinetics of Salmonella enterica in Hajna tetrathionate broth, Rappaport broth and modified semisolid Rappaport agar

    PubMed Central

    FUJIHARA, Masatoshi; TABUCHI, Hiroyuki; UEGAKI, Kaho

    2015-01-01

    To determine the appropriate method for isolating Salmonella enterica, we compared the growth of S. enterica serovars using three selective enrichment media. S. enterica was more successfully isolated from artificially contaminated fecal samples after enrichment in Hajna tetrathionate broth or modified semisolid Rappaport agar than in Rappaport broth. Since most bacteria (other than motile S. enterica) do not migrate on modified semisolid Rappaport agar, the growth characteristics of S. enterica can be interpreted easily and quickly. Two S. enterica isolates did not migrate on modified semisolid Rappaport agar, but did grow in Hajna tetrathionate broth, which suggests that the combined use of these selective enrichment media is appropriate for isolating S. enterica. PMID:26498402

  17. Evaluation of Cesium, Strontium, and Lead Sorption, Desorption, and Diffusion in Volcanic Tuffs from Frenchman Flat, Nevada Test Site: Macroscopic and Spectroscopic Investigations

    SciTech Connect

    Charalambos Papelis; Wooyong Um

    2003-03-01

    The interaction of radionuclides and other contaminants with minerals and other aquifer materials controls the rate of migration of these contaminants in groundwater. The stronger these interactions, the more a radionuclide will be retarded. Processes such as sorption and diffusion often control the migration of inorganic compounds in aquifers. In addition, these processes are often controlled by the nature of ions of interest, the nature of the aquifer materials, and the specific geochemical conditions. Parameters describing sorption and diffusion of radionuclides and other inorganic ions on aquifer materials are used in transport codes to predict the potential for migration of these contaminants into the accessible environment. Sorption and diffusion studies can help reduce the uncertainty of radionuclide transport modeling on the Nevada Test Site (NTS) and other nuclear testing areas. For example, reliable sorption equilibrium constants, obtained under a variety of conditions, can be used to suggest a plausible sorption mechanism and to provide retardation parameters that can be used in transport models. In addition, these experiments, performed under a variety of conditions, can lead to models that can accommodate changing geochemical conditions. Desorption studies can probe the reversibility of reactions and test whether the reversibility assumed by equilibrium models is justified. Kinetic studies can be used to probe the time-dependent limitations of reactions and suggest whether an equilibrium or kinetic model may be more appropriate. Finally, spectroscopic studies can be used to distinguish between different sorption mechanisms, and provide further guidance with respect to model selection.

  18. A Simple Experiment for Visualizing Diffusion

    ERIC Educational Resources Information Center

    Helseth, L. E.

    2011-01-01

    We propose a simple and fascinating experiment for studying diffusion in gels using a pH-sensitive dye. By doping agar with methyl red, we obtain a gel which rapidly reacts to changes in pH by changing its absorption spectrum. The pH gradients can be followed using a digital camera, and we demonstrate here that the pH-sensitive colour changes can…

  19. LABORATORY ASSESSMENT OF THE PERMEABILITY AND DIFFUSION CHARACTERISTICS OF FLORIDA CONCRETES - PHASE I - METHODS DEVELOPMENT AND TESTING

    EPA Science Inventory

    The report gives results of Phase I of a laboratory assessment of the permeability and diffusion characteristics of Florida concretes. (NOTE: The ability of concrete to permit air flow under pressure (permeability) and the passage of radon gas without any pressure difference (dif...

  20. Preliminary engineering report for design of a subscale ejector/diffuser system for high expansion ratio space engine testing

    NASA Technical Reports Server (NTRS)

    Wojciechowski, C. J.; Kurzius, S. C.; Doktor, M. F.

    1984-01-01

    The design of a subscale jet engine driven ejector/diffuser system is examined. Analytical results and preliminary design drawings and plans are included. Previously developed performance prediction techniques are verified. A safety analysis is performed to determine the mechanism for detonation suppression.

  1. LABORATORY ASSESSMENT OF THE PERMEABILITY AND DIFFUSION CHARACTERISTICS OF FLORIDA CONCRETES - PHASE I. METHODS DEVELOPMENT AND TESTING

    EPA Science Inventory

    The report gives results of Phase I of a laboratory assessment of the permeability and diffusion characteristics of Florida concretes. (NOTE: The ability of concrete to permit air flow under pressure (permeability) and the passage of radon gas without any pressure difference (dif...

  2. Serogroup identification of Neisseria meningitidis: comparison of an antiserum agar method with bacterial slide agglutination.

    PubMed Central

    Craven, D E; Frasch, C E; Robbins, J B; Feldman, H A

    1978-01-01

    A serum agar method for serogrouping Neisseria meningitidis is described and compared with conventional bacterial slide agglutination. There was 93% agreement for 300 strains examined individually by each method. Among strains from serogroups A, B, C, Y, and W135, there was 100% correlation, whereas strains from serogroup 29E (Z') had only 67% correlation. The serum agar method was rapid, as well as easy to perform and interpret. The potential benefits of this method for epidemiological studies and reference laboratories processing large numbers of meningococcal isolates are emphasized. Images PMID:96123

  3. Spin echo versus stimulated echo diffusion tensor imaging of the in vivo human heart

    PubMed Central

    von Deuster, Constantin; Stoeck, Christian T.; Genet, Martin; Atkinson, David

    2015-01-01

    Purpose To compare signal‐to‐noise ratio (SNR) efficiency and diffusion tensor metrics of cardiac diffusion tensor mapping using acceleration‐compensated spin‐echo (SE) and stimulated echo acquisition mode (STEAM) imaging. Methods Diffusion weighted SE and STEAM sequences were implemented on a clinical 1.5 Tesla MR system. The SNR efficiency of SE and STEAM was measured (b = 50–450 s/mm2) in isotropic agar, anisotropic diffusion phantoms and the in vivo human heart. Diffusion tensor analysis was performed on mean diffusivity, fractional anisotropy, helix and transverse angles. Results In the isotropic phantom, the ratio of SNR efficiency for SE versus STEAM, SNRt(SE/STEAM), was 2.84 ± 0.08 for all tested b‐values. In the anisotropic diffusion phantom the ratio decreased from 2.75 ± 0.05 to 2.20 ± 0.13 with increasing b‐value, similar to the in vivo decrease from 2.91 ± 0.43 to 2.30 ± 0.30. Diffusion tensor analysis revealed reduced deviation of helix angles from a linear transmural model and reduced transverse angle standard deviation for SE compared with STEAM. Mean diffusivity and fractional anisotropy were measured to be statistically different (P < 0.001) between SE and STEAM. Conclusion Cardiac DTI using motion‐compensated SE yields a 2.3–2.9× increase in SNR efficiency relative to STEAM and improved accuracy of tensor metrics. The SE method hence presents an attractive alternative to STEAM based approaches. Magn Reson Med 76:862–872, 2016. © 2015 The Authors. Magnetic Resonance in Medicine published by Wiley Periodicals, Inc. on behalf of International Society for Magnetic Resonance in Medicine. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. PMID:26445426

  4. Development of a mixed antigen agar gel enzyme assay (AGEA) for the detection of antibodies to poxvirus in chicken and turkey sera.

    PubMed

    Tadese, Theodros; Potter, E A; Reed, W M

    2003-02-01

    A mixed-antigen agar gel enzyme assay (AGEA) was developed to detect antibodies to poxviruses in chicken and turkey sera. The assay combines the principles of immunodiffusion and enzyme assay. For the detection of antibodies to fowl poxvirus (FP), pigeon poxvirus (PP) and turkey poxvirus (TP) in turkey serum samples, the three antigens were combined to form a mixed-antigen assay. To screen for antibodies to FP and PP in chicken serum samples, the two antigens were combined. When FP and PP viruses were combined as antigens, the sensitivity for chicken sera was 64% but the sensitivity of the agar gel precipitation test (AGPT) was 34% (P<0.001). When antibodies were detected in turkey sera using the mixed antigens, the AGEA had a sensitivity of 66.4% while that of AGPT was 25% (P<0.001). PMID:12655123

  5. Preparation of nanocellulose from micro-crystalline cellulose: The effect on the performance and properties of agar-based composite films.

    PubMed

    Shankar, Shiv; Rhim, Jong-Whan

    2016-01-01

    A facile approach has been performed to prepare nanocellulose (NC) from micro-crystalline cellulose (MCC) and test their effect on the performance properties of agar-based composite films. The NC was characterized by STEM, XRD, FTIR, and TGA. The NC was well dispersed in distilled water after sonication and their size was in the range of 100-500nm. The XRD results revealed the crystallinity of NC. The crystallinity index of NC (0.71) was decreased compared to the MCC (0.81). The effect of NC or MCC content (1, 3, 5 and 10wt% based on agar) on the mechanical, water vapor permeability (WVP), and thermal properties of the composites were studied. The NC obtained from MCC can be used as a reinforcing agent for the preparation of biodegradable composites films for their potential use in the development of biodegradable food packaging materials. PMID:26453846

  6. Combined Use of Pastorex Staph-Plus and Either of Two New Chromogenic Agars, MRSA ID and CHROMagar MRSA, for Detection of Methicillin-Resistant Staphylococcus aureus▿

    PubMed Central

    Compernolle, Veerle; Verschraegen, Gerda; Claeys, Geert

    2007-01-01

    We describe the search toward a fast and reliable strategy to detect and confirm the presence of methicillin-resistant Staphylococcus aureus (MRSA) in screening samples. First, we evaluated the sensitivities and specificities of oxacillin resistance screening agar (ORSA) with enrichment (tryptic soy broth [TSB] and ORSA [TSB-ORSA]) and without enrichment (ORSA), MRSA ID (MRSA_ID) plates, and CHROMagar MRSA (C_MRSA) plates, all of which were inoculated with equal volumes of a suspension made by emulsifying screening swabs. Whereas the sensitivities after 48 h were similar for all media tested (77% for MRSA_ID and ORSA; 73% for C_MRSA and ORSA after enrichment [TSB-ORSA]), the specificities of MRSA_ID (98% after 24 h and 94% after 48 h) and C_MRSA (98% after 24 h and 90% after 48 h) were superior to the specificities of ORSAs (92% after 24 h and 83% after 48 h) and TSB-ORSA (86% after 24 h and 81% after 48 h). Subsequently, the performance of the Pastorex Staph-Plus agglutination test with presumptive MRSA isolates taken directly from chromogenic agars (direct_Pastorex agglutination) was compared to that of the Pastorex Staph-Plus agglutination test with isolates from blood agar subcultures (conventional_Pastorex agglutination). When the direct_Pastorex agglutination test on MRSA_ID plates was combined with Gram staining, the direct_Pastorex agglutination test with samples from MRSA_ID plates was as reliable as the conventional_Pastorex agglutination test with samples from blood agar subcultures from MRSA_ID plates. In contrast, the direct_Pastorex agglutination test with samples from C_MRSA plates gave false-negative results. Finally, we calculated the processing times of the four different strategies, namely, (i) enrichment in TSB supplemented with NaCl, subsequent culture on ORSA, and the conventional_Pastorex agglutination test; (ii) direct inoculation of ORSA combined with conventional_Pastorex agglutination test; (iii) direct inoculation of MRSA_ID plates

  7. Evaluation of diffusion and dilution methods to determine the antibacterial activity of plant extracts.

    PubMed

    Klancnik, Anja; Piskernik, Sasa; Jersek, Barbara; Mozina, Sonja Smole

    2010-05-01

    The aim of this study was to evaluate diffusion and dilution methods for determining the antibacterial activity of plant extracts and their mixtures. Several methods for measurement of the minimal inhibitory concentration (MIC) of a plant extract are available, but there is no standard procedure as there is for antibiotics. We tested different plant extracts, their mixtures and phenolic acids on selected gram-positive (Staphylococcus aureus, Bacillus cereus, and Listeria monocytogenes) and gram-negative bacteria (Escherichia coli O157:H7, Salmonella Infantis, Campylobacter jejuni, Campylobacter coli) with the disk diffusion, agar dilution, broth microdilution and macrodilution methods. The disk diffusion method was appropriate only as a preliminary screening test prior to quantitative MIC determination with dilution methods. A comparison of the results for MIC obtained by agar dilution and broth microdilution was possible only for gram-positive bacteria, and indicated the latter as the most accurate way of assessing the antimicrobial effect. The microdilution method with TTC (2,3,5-triphenyl tetrazolium chloride) or INT (2-p-iodophenyl-3-p-nitrophenyl-5-phenyl tetrazolium chloride) to indicate the viability of aerobic bacteria was found to be the best alternative approach, while only ATP determination was appropriate for microaerophilic Campylobacter spp. Using survival curves the kinetics of bacterial inactivation on plant extract exposure was followed for 24h and in this way the MIC values determined by the microdilution method were confirmed as the concentrations of extracts that inhibited bacterial growth. We suggest evaluation of the antibacterial activity of plant extracts using the broth microdilution method as a fast screening method for MIC determination and the macrodilution method at selected MIC values to confirm bacterial inactivation. Campylobacter spp. showed a similar sensitivity to plant extracts as the tested gram-positive bacteria, but S

  8. Preparation and application of agar/alginate/collagen ternary blend functional food packaging films.

    PubMed

    Wang, Long-Feng; Rhim, Jong-Whan

    2015-09-01

    Ternary blend agar/alginate/collagen (A/A/C) hydrogel films with silver nanoparticles (AgNPs) and grapefruit seed extract (GSE) were prepared. Their performance properties, transparency, tensile strength (TS), water vapor permeability (WVP), water contact angle (CA), water swelling ratio (SR), water solubility (WS), and antimicrobial activity were determined. The A/A/C film was highly transparent, and both AgNPs and GSE incorporated blend films (A/A/C(AgNPs) and A/A/C(GSE)) exhibited UV-screening effect, especially, the A/A/C(GSE) film had high UV-screening effect without sacrificing the transmittance. In addition, the A/A/C blend films formed efficient hydrogel film with the water holding capacity of 23.6 times of their weight. Both A/A/C(AgNPs) and A/A/C(GSE) composite films exhibited strong antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli) food-borne pathogenic bacteria. The test results of fresh potatoes packaging revealed that all the A/A/C ternary blend films prevented forming of condensed water on the packaged film surface, both A/A/C(AgNPs) and A/A/C(GSE) composite films prevented greening of potatoes during storage. The results indicate that the ternary blend hydrogel films incorporated with AgNPs or GSE can be used not only as antifogging packaging films for highly respiring fresh agriculture produce, but also as an active food packaging system utilizing their strong antimicrobial activity. PMID:26187189

  9. Predicting potassium uptake by corn in the field using the strontium nitrate soil testing method and a diffusion-controlled uptake model

    SciTech Connect

    Wietholter, S.

    1983-01-01

    The rate of potassium uptake by plants grown in soil is limited by the rate of diffusion to the roots. Calculation of diffusion rates requires a knowledge of the soil solution concentration (C/sub li/), buffer power (b) and diffusion coefficient (D). The Gapon equation was used to calculate selectivity coefficients for K/sup +/, Na/sup +/, Ca/sup 2 +/, Mg/sup 2 +/, Mn/sup 2 +/ and Al/sup 3 +/ from concentrations in 0.004M Sr(NO/sub 3/)/sub 2/ extracts and from amounts exchangeable in M NH/sub 4/Cl. For a proposed routine method, C/sub li/, b and D were calculated from the Sr(NO/sub 3/)/sub 2/ equilibration. This required the use of estimated selectivity coefficients obtained from regression of pH, OM, clay and cation ratios on determined selectivity coefficients. Uptake of K/sup +/ by corn at 51 field sites throughout Wisconsin was best predicted by the diffusion model (r/sup 2/ = 0.58 with determined selectivity coefficients and 0.51 with estimated coefficients). The K/sup +/ concentration in Sr(NO/sub 3/)/sub 2/ also correlated well (r/sup 2/ = 0.49). Exchangeable K/sup +/ was a poor predictor (r/sup 2/ = 0.13). The diffusion model applied to data from Sr(NO/sub 3/)/sub 2/ equilibrium appears promising as a routine soil testing method for K/sup +/. With this approach, fertilizer recommendations could be based on theoretically-derived estimates of K/sup +/ uptake rather than on empirically-derived relationships.

  10. Application of the electromagnetic borehole flowmeter and evaluation of previous pumping tests at Paducah Gaseous Diffusion Plant. Final report, June 15, 1992--August 31, 1992

    SciTech Connect

    Young, S.C.; Julian, S.C.; Neton, M.J.

    1993-01-01

    Multi-well pumping tests have been concluded at wells MW79, MW108, and PW1 at the Paducah Gaseous Diffusion Plant (PGDP) to determine the hydraulic properties of the Regional Gravel Aquifer (RGA). Soil cores suggest that the RGA consists of a thin sandy facies (2 to 6 feet) at the top of a thicker (> 10 feet) gravelly facies. Previous analyses have not considered any permeability contrast between the two facies. To assess the accuracy of this assumption, TVA personnel conducted borehole flowmeter tests at wells MW108 and PW1. Well MW79 could not be tested. The high K sand unit is probably 10 times more permeable than comparable zone in the gravelly portion of the RGA. Previous analyses of the three multi-well aquifer tests do not use the same conceptual aquifer model. Data analysis for one pumping test assumed that leakance was significant. Data analysis for another pumping test assumed that a geologic boundary was significant. By collectively analyzing all three tests with the borehole flowmeter results, the inconsistency among the three pumping tests can be explained. Disparity exists because each pumping test had a different placement of observation wells relative to the high K zone delineating by flowmeter testing.

  11. Preliminary identification of beta-hemolytic streptococci in throat swab cultures with a commercial blood agar slide (streptocult).

    PubMed Central

    Christensen, P; Danielsson, D; Hovelius, B; Kjellander, J

    1982-01-01

    A commercial blood agar slide (Streptocult, Orion Diagnostica) was used for preliminary identification of beta-hemolytic streptococci of groups A, C, and G in throat swab specimens. The sensitivity of the test was 93.6% and the specificity was 94.7%, as judged from 580 specimens. A model is suggested for routine processing of throat swab specimens, involving inoculation and reading of the slide in general practice and transport of positive or inconclusive slides to a bacteriology laboratory for isolation and serological grouping of beta-hemolytic streptococci. The model combines preliminary detection of beta-hemolytic streptococci within 24 h with the reliability of serological groupings, and should reduce the volume of specimens sent to the laboratory considerably. Images PMID:7050155

  12. Applying Agar's Concept of "Languaculture" to Explain Asian Students' Experiences in the Australian Tertiary Context

    ERIC Educational Resources Information Center

    Norris, Lindy; Tsedendamba, Nara

    2015-01-01

    This paper reports part of a broader qualitative case study of Asian students "translation" (Agar, 2006) to study in an Australian university. The paper is concerned with the experiences of eight participants and their involvement in a training programme in the use of language learning strategies (LLS) to support their engagement with…

  13. Development of hyperspectral imaging technique for salmonella enteritidis and typhimurium on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Salmonella is a common cause of foodborne disease resulting from the consumption of contaminated food products. Although a direct plating method is widely used for presumptive positive screening of pathogenic Salmonella colonies on agar plates, it is labor-intensive, time-consuming and also prone to...

  14. THE MICROGARDENING COOKBOOK, DIRECTIONS FOR PREPARING DISHES AND TUBES OF STERILE NUTRIENT AGAR.

    ERIC Educational Resources Information Center

    CHANDLER, MARION N.

    THIS BOOKLET WAS PREPARED FOR TEACHER USE IN ASSOCIATION WITH THE ELEMENTARY SCIENCE STUDY UNIT "MICROGARDENING." IT CONTAINS DIRECTIONS FOR PREPARING CULTURE DISHES AND TUBES OF NUTRIENT STERILE AGAR FOR FUNGAL AND/OR BACTERIAL GROWTH. IT INCLUDES (1) LISTS OF NEEDED SUPPLIES AND EQUIPMENT, (2) DIRECTIONS FOR THE PREPARATION AND STERILIZATION OF…

  15. Mercury in fruiting bodies of Fly Agaric Amanita muscaria (L.: Fr.) Pers. collected from Poland

    NASA Astrophysics Data System (ADS)

    Falandysz, J.; Lipka, K.

    2003-05-01

    Total mercury concentrations were determined in the fruiting bodies of Fly Agaric Amanita muscaria (L.: FL) Pers. and underlying soil substrate collected from several sites in Poland in 1993-2000 to evaluate mercury status as contaminant and bioindicating features of this species. The samples were collected from the spatially distant sites such as: Zaborski Landscape Park, Mierzeja Wiślana Landscape Park, Wdzydzki Landscape Park, Borecka Forest, Tucholskie Forest, Wieluńska Upland, the communities of Gubin, Manowo, Lubiana and Morag. Total mercury content of caps and stalks of Fly agaric varied widely depending on the sites examined. The range of the mean mercury concentrations for all 17 sites was between 96±10 and 1900±1400 ng/g dry wt for the caps and between 6l±32 and 920±760 ng/g dry wt for the stalks, while between 4.4±3.1 and 150±20 ng/g were noted for soil substrate samples from 9 sites examined. Fly agaric independently of the site examined showed relatively good capacity to accumulate total mercury and BCF values varied between 16±10 and 74±15 for the caps and between 11±8 and 42±10 for the stalks. Nevertheless, relatively high bioconcentration potential of mercury by Fly agaric seems to be specific for that species and under soil mercury concentrations noted no bioindication properties of this mushroom could be observed.

  16. Seasonal variation in the biomass and agar yield from Gracilaria cervicornis and Hydropuntia cornea from Brazil.

    PubMed

    Marinho-Soriano, E; Silva, T S; Moreira, W S

    2001-04-01

    Seasonality of biomass and agar yield from two agarophytes (G. cervicornis and H. cornea) was determined. The biomass from G. cervicornis was higher (390 g m-2) during the dry season and lower during the rainy season (129 g m-2). The data analysis for G. cervicornis revealed a significant seasonal variation (P < 0.05). H. cornea did not show a clear seasonal variation and was present only from March to August. The peak in biomass for this species was recorded in April (383 g m-2) and was significantly different from the other months (P < 0.05). The agar yield for G. cervicornis varied from 11% to 20%, with generally higher values recorded during the dry season. The agar yield showed a highly significant variation (P < 0.001). Agar yield from H. cornea ranged from 29% to 41%, with a peak recorded in June. The results above indicate that H. cornea can be considered a good candidate for commercial use. PMID:11272017

  17. Radiation survival of murine and human melanoma cells utilizing two assay systems: monolayer and soft agar.

    PubMed Central

    Yohem, K. H.; Slymen, D. J.; Bregman, M. D.; Meyskens, F. L.

    1988-01-01

    The radiation response of murine and human melanoma cells assayed in bilayer soft agar and monolayer was examined. Cells from the murine melanoma Cloudman S91 CCL 53.1 cell line and three human melanoma cell strains (C8146C, C8161, and R83-4) developed in our laboratory were irradiated by single dose X-rays and plated either in agar or on plastic. D0 values were the same within 95% confidence intervals for cells from the human melanoma cell strains C8146C, C8161, and R83-4 but were dissimilar for the murine cell line CCL 53.1 Dq values were different for all cells studied. The shape of the survival curve for all four melanomas was not identical for cells assayed in soft agar versus cells grown on plastic. This would indicate that apparent radiosensitivity was influenced by the method of assay although there were no apparent consistent differences between the curves generated by monolayer or bilayer soft agar assays. PMID:3348949

  18. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance sp...

  19. EFFECT OF IMPACT STRESS ON MICROBIAL RECOVERY ON AN AGAR SURFACE

    EPA Science Inventory

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. he relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving a...

  20. A Method for Cell Culture and Maintenance of Ammonia-Oxidizing Archaea in Agar Stab.

    PubMed

    Chu, Yeon-Jin; Lee, Jin-Young; Shin, So-Ra; Kim, Geun-Joong

    2015-12-01

    Ammonia oxidizing archaea (AOA) are predominantly found and closely linked with geochemical cycling of nitrogen in non-extreme habitats. However, these strains have mainly been investigated using liquid cultures of enriched cells. Here, we provide an agar stab as a simple and reliable means of cultivating and maintaining AOA. PMID:26543273

  1. Evolutionary consequences of putative intra- and interspecific hybridization in agaric fungi

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Agaric fungi of the southern Appalachians including the Great Smoky Mountains National Park are often heterozygous for the rDNA internal transcribed spacer region (ITS) with >42% of collections showing some level of heterozygosity for indels and/or base-pair substitutions. For these collections, int...

  2. Fishmeal extract bile salt lactose agar--a differential medium for enteric bacteria.

    PubMed

    Subbannayya, K; Udayalaxmi, J; Anugraha, M

    2006-08-01

    Fishmeal extract bile salt lactose agar (FEBLA), a new differential medium for enteric bacteria was developed and evaluated for its ability to grow and differentiate lactose fermenters (LF) from non-lactose fermenters (NLF) in comparison with MacConkeys agar. Performance of FEBLA was at par with the latter. On FEBLA medium, the contrast between LF and NLF colonies was pronounced and Klebsiella pneumoniae produced more mucoid colonies than on MacConkeys agar (Hi Media). Unlike MacConkeys agar, a 24 h culture of K. pneumoniae cells on FEBLA were longer and thicker with abundant capsular material around the bacilli. Escherichia coli produced long and thick cells but only after 48h. No change in cell morphology was evident with regard to Salmonella typhi, S. paratyphi A, Shigella flexneri, Pseudomonas aeruginosa, Proteus mirabilis, Proteus vulgaris, Citrobacter koseri and Acinetobacter baumannii. Performance of the medium was controlled using E. coli and S. flexneri. FEBLA is simple, cost effective and may be a suitable alternative in the preliminary identification of enteric bacteria. PMID:16924840

  3. MODIFIED AGAR MEDIUM FOR DETECTING ENVIRONMENTAL SALMONELLAE BY THE MOST-PROBABLE-NUMBER METHOD

    EPA Science Inventory

    Salmonellae in the environment remain a potential source of disease. Low numbers of salmonellae have been detected and enumerated from environmental samples by most probable number methods that require careful colony selection from plated agar medium. A modified xylose lysine bri...

  4. Alternative plasticizers for the production of thermo-compressed agar films

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully Electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  5. Minimum inhibitory concentration breakpoints and disk diffusion inhibitory zone interpretive criteria for tilmicosin susceptibility testing against Pasteurella multocida and Actinobacillus pleuropneumoniae associated with porcine respiratory disease.

    PubMed

    Shryock, Thomas R; Staples, J Mitchell; DeRosa, David C

    2002-09-01

    Tilmicosin is a novel macrolide antibiotic developed for exclusive use in veterinary medicine. Tilmicosin has been approved as a feed premix to control porcine respiratory disease associated with Pasteurella multocida and Actinobacillus pleuropneumoniae. The development of antimicrobial susceptibility testing guidelines for tilmicosin was predicated on the relationship of clinical efficacy studies that demonstrated a favorable therapeutic outcome, on pharmacokinetic data, and on in vitro test data, as recommended by the National Committee for Clinical Laboratory Standards (NCCLS). The approved breakpoints for the minimum inhibitory concentration dilution testing for both species are resistant, > or = 32 microg/ml, and susceptible, < or = 16 microg/ml. The zone of inhibition interpretive criteria for disk diffusion testing with a 15-microg tilmicosin disk are resistant, < or = 10 mm, and susceptible, > or = 11 mm. PMID:12296390

  6. Comparison of the MicroScan system and the agar dilution assay for Quinupristin/Dalfopristin susceptibility of Enterococcus faecium.

    PubMed

    Kim, Yang-Ree; Kim, Sang-Il; Hur, Ji-Ahn; Kim, Youn-Jeong; Wie, Seong-Heon; Park, Yeon-Joon; Kang, Moon-Won

    2007-01-01

    We compared the results of Quinupristin/Dalfopristin (Q/D) susceptibility tests by the Positive Combo Panel (Type 11) of the MicroScan Walk Away 96 analyzer (Dade Behring, Inc.) with those obtained by the reference agar dilution method. From September 2003 to August 2004, a total of 410 E. faecium isolates were obtained from clinical samples. Of these, 65 (15.9%) strains were non-susceptible, and 345 (84.1%) strains were susceptible to Q/D. We collected consecutively 65 Q/D non-susceptible E. faecium isolates (42 resistant, 23 intermediate), and randomly selected 32 Q/D susceptible E. faecium isolates using the MicroScan system. The minimal inhibitory concentrations (MICs) of Q/D, vancomycin, and teicoplanin were determined by the agar dilution method according to CLSI guidelines. The agreement rates between the two methods were 100% for Q/D-susceptible strains, 85.7% for Q/D-resistant strains, and 26.1% for Q/D-intermediate strains of E. faecium. The major error rate (S-->R) was 11.9%, and the minor error rate (S-->I) was 13.0%. No very major errors were found. We conclude that for MicroScan 'non-susceptible' test results for Q/D, it is necessary to confirm the result using a reference method. The Q/D-resistance rate was higher in glycopeptide-susceptible (78.0% for vancomycin, 82.0% for teicoplanin) than glycopeptide-resistant E. faecium (22.0% for vancomycin, 16.0% for teicoplanin). Further studies are needed to determine whether Q/D use in hospitals or virginiamycin use in animals, or other factors, are responsible for the high rates of glycopeptide-susceptible and Q/D-resistant E. faecium strains in Korea. PMID:17709691

  7. Multinomial diffusion equation

    NASA Astrophysics Data System (ADS)

    Balter, Ariel; Tartakovsky, Alexandre M.

    2011-06-01

    We describe a new, microscopic model for diffusion that captures diffusion induced fluctuations at scales where the concept of concentration gives way to discrete particles. We show that in the limit as the number of particles N→∞, our model is equivalent to the classical stochastic diffusion equation (SDE). We test our new model and the SDE against Langevin dynamics in numerical simulations, and show that our model successfully reproduces the correct ensemble statistics, while the classical model fails.

  8. Multinomial diffusion equation

    SciTech Connect

    Balter, Ariel I.; Tartakovsky, Alexandre M.

    2011-06-24

    We describe a new, microscopic model for diffusion that captures diffusion induced uctuations at scales where the concept of concentration gives way to discrete par- ticles. We show that in the limit as the number of particles N ! 1, our model is equivalent to the classical stochastic diffusion equation (SDE). We test our new model and the SDE against Langevin dynamics in numerical simulations, and show that our model successfully reproduces the correct ensemble statistics, while the classical model fails.

  9. Diffusive partitioning tracer test for the quantification of nonaqueous phase liquid (NAPL) in the vadose zone: Performance evaluation for heterogeneous NAPL distribution

    NASA Astrophysics Data System (ADS)

    Werner, David; Karapanagioti, Hrissi K.; Höhener, Patrick

    2009-08-01

    A partitioning tracer test based on gas-phase diffusion in the vadose zone yields estimates of the residual nonaqueous phase liquid (NAPL) saturation. The present paper investigates this technique further by studying diffusive tracer breakthrough curves in the vadose zone for a heterogeneous NAPL distribution. Tracer experiments were performed in a lysimeter with a horizontal layer of artificial kerosene embedded in unsaturated sand. Tracer disappearance curves at the injection point and tracer breakthrough curves at some distance from the injection point were measured inside and outside of the NAPL layer. A numerical code was used to generate independent model predictions based on the physicochemical sand, NAPL, and tracer properties. The measured and modeled tracer breakthrough curves were in good agreement confirming the validity of important modeling assumptions such as negligible sorption of chlorofluorocarbon (CFC) tracers to the uncontaminated sand and their fast reversible partitioning between the soil air and the NAPL phase. Subsequently, the model was used to investigate different configurations of NAPL contamination. The experimental and model results show that the tracer disappearance curves of a single-well diffusive partitioning tracer test (DPTT) are dominated by the near-field presence of NAPL around the tip of the soil gas probe. In contrast, breakthrough curves of inter-well tracer tests reflect the NAPL saturation in between the probes, although there is no unique interpretation of the tracer signals if the NAPL distribution is heterogeneous. Numerical modeling is useful for the planning of a DPTT application. Simulations suggest that several cubic meters of soil can be investigated with a single inter-well partitioning tracer test of 24-hour duration by placing the injection point in the center of the investigated soil volume and probes at up to 1 m distance for the monitoring of gaseous tracers.

  10. Analysis of three sets of SWIW tracer-test data using a two-population complex fracture model for matrix diffusion and sorption

    SciTech Connect

    Doughty, C.; Tsang, C.F.

    2009-08-01

    A complex fracture model employing two populations for diffusion and sorption is proposed to analyze three representative single-well injection-withdrawal (SWIW) tracer tests from Forsmark and Laxemar, the two sites under investigation by the Swedish Nuclear Fuel and Waste Management Company (SKB). One population represents the semi-infinite rock matrix and the other represents finite blocks that can become saturated, thereafter accepting no further diffusion or sorption. The diffusion and sorption parameters of the models are inferred by matching tracer breakthrough curves (BTCs). Three tracers are simultaneously injected, uranine (Ur), which is conservative, and rubidium (Rb) and cesium (Cs), which are non-conservative. For non-sorbing tracer uranine, the finite blocks become saturated with test duration of the order of 10 hours, and both the finite and the semi-infinite populations play a distinct role in controlling BTCs. For sorbing tracers Rb and Cs, finite blocks do not saturate, but act essentially as semi-infinite, and thus BTC behavior is comparable to that obtained for a model containing only a semi-infinite rock matrix. The ability to obtain good matches to BTCs for both sorbing and non-sorbing tracers for these three different SWIW data sets demonstrates that the two-population complex fracture model may be a useful conceptual model to analyze all SWIW tracer tests in fractured rock, and perhaps also usual multiwell tracer tests. One of the two populations should be semi-infinite rock matrix and the other finite blocks that can saturate. The latter can represent either rock blocks or gouge within the fracture, a fracture skin zone, or stagnation zones.

  11. Comparative assessment of CDS, CLSI disc diffusion and Etest techniques for antimicrobial susceptibility testing of Neisseria gonorrhoeae: a 6-year study

    PubMed Central

    Singh, Vikram; Kakran, Monika; Ramesh, V

    2012-01-01

    Background A variety of techniques are available for antimicrobial susceptibility testing of Neisseria gonorrhoeae. Objective The aim of this study was to find a cost-effective, reliable and easily applicable microbiological method to detect antimicrobial susceptibilities of N. gonorrhoeae in resource-poor countries. Design Prospective study. Setting Male and female STD clinic of Regional STD Teaching, Training and Research Centre, New Delhi, India. Participants N. gonorrhoeae isolates from all male and female patients presenting with acute gonococcal urethritis and cervical discharge. Material and methods A total of 295 consecutive N. gonorrhoeae isolates during 2005–2010 was used to compare the Clinical and Laboratory Standards Institute (CLSI) and CDS disc diffusion technique with Etest by performing antimicrobial susceptibility testing in parallel for penicillin, tetracycline, ceftriaxone, ciprofloxacin and spectinomycin. WHO reference strains were used as controls. Results CDS disc diffusion zones of inhibition showed that complete percentage agreement for penicillin, ciprofloxacin and tetracycline was high with their analogous Etest minimal inhibitory concentrations in comparison to CLSI disc diffusion technique, that is, 91.5%, 92.9% and 99.3% versus 87.5%, 88.5% and 74.9%, respectively. CDS results had less number of major and minor category discrepancies in comparison to CLSI and CDS method showed excellent correlation coefficient (r=1) with Etest for all five antimicrobial agents tested in comparison to CLSI (r=0.92). It was very poor (r=0.61) by CLSI method for tetracycline. The correlation coefficients between the two methods and the Etest were identical if tetracycline was removed from the CLSI analysis. Conclusions The CDS technique is an attractive alternative for N. gonorrhoeae susceptibility testing and is recommended for monitoring the antimicrobial susceptibility in less developed and resource-poor settings to facilitate enhanced antimicrobial

  12. Effect of impact stress on microbial recovery on an agar surface.

    PubMed

    Stewart, S L; Grinshpun, S A; Willeke, K; Terzieva, S; Ulevicius, V; Donnelly, J

    1995-04-01

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. The relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving agar slide impactor operating over a flow rate range from 3.8 to 40 liters/min yielding impaction velocities from 24 to 250 m/s. As a reference, the sixth stage of the Andersen Six-Stage Viable Particle Sizing Sampler was used at its operating flow rate of 28.3 liters/min (24 m/s). At a collection efficiency of close to 100% for the agar slide impactor, an increase in sampling flow rate and, therefore, in impaction velocity produced a significant decline in the percentage of microorganisms recovered. Conversely, when the collection efficiency was less than 100%, greater recovery and lower injury rates occurred. The highest relative rate of recovery (approximately 51% for P. fluorescens and approximately 62% for M. luteus) was obtained on the complete (Trypticase soy agar) medium at 40 and 24 m/s (6.4 and 3.8 liters/min), respectively. M. luteus demonstrated less damage than P. fluorescens, suggesting the hardy nature of the gram-positive strain versus that of the gram-negative microorganism. Comparison of results from the agar slide and Andersen impactors at the same sampling velocity showed that recovery and injury due to collection depends not only on the magnitude of the impaction velocity but also on the degree to which the microorganisms may be embedded in the collection medium.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7747946

  13. Effect of impact stress on microbial recovery on an agar surface.

    PubMed Central

    Stewart, S L; Grinshpun, S A; Willeke, K; Terzieva, S; Ulevicius, V; Donnelly, J

    1995-01-01

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. The relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving agar slide impactor operating over a flow rate range from 3.8 to 40 liters/min yielding impaction velocities from 24 to 250 m/s. As a reference, the sixth stage of the Andersen Six-Stage Viable Particle Sizing Sampler was used at its operating flow rate of 28.3 liters/min (24 m/s). At a collection efficiency of close to 100% for the agar slide impactor, an increase in sampling flow rate and, therefore, in impaction velocity produced a significant decline in the percentage of microorganisms recovered. Conversely, when the collection efficiency was less than 100%, greater recovery and lower injury rates occurred. The highest relative rate of recovery (approximately 51% for P. fluorescens and approximately 62% for M. luteus) was obtained on the complete (Trypticase soy agar) medium at 40 and 24 m/s (6.4 and 3.8 liters/min), respectively. M. luteus demonstrated less damage than P. fluorescens, suggesting the hardy nature of the gram-positive strain versus that of the gram-negative microorganism. Comparison of results from the agar slide and Andersen impactors at the same sampling velocity showed that recovery and injury due to collection depends not only on the magnitude of the impaction velocity but also on the degree to which the microorganisms may be embedded in the collection medium.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7747946

  14. Use of Dehydrated Agar to Estimate Microbial Water Quality for Horticulture Irrigation.

    PubMed

    Meador, Dustin P; Fisher, Paul R; Guy, Charles L; Harmon, Philip F; Peres, Natalia A; Teplitski, Max

    2016-07-01

    Petrifilms are dehydrated agar culture plates that have been used to quantify colony forming units (CFU) mL of either aerobic bacteria (Petrifilm-AC) or fungus (Petrifilm-YM), depending on substrate composition. Microbes in irrigation systems can indicate biofilm risk and potential clogging of irrigation emitters. The research objective was to compare counts on Petrifilms versus traditional, hydrated-agar plates using samples collected from recirculated irrigation waters and cultures of isolated known species. The estimated count (in CFU mL) from a recirculated irrigation sample after 7 d of incubation on Petrifilm-YM was only 5.5% of the count quantified using sabouraud dextrose agar (SDA) with chloramphenicol after 14 d. In a separate experiment with a known species, Petrifilm-YM did not successfully culture zoospores of . Isolates of viable zoospores were cultured successfully on potato-dextrose agar (PDA), with comparable counts with a vegetable juice medium supplemented with the antibiotics pimaricin, ampicillin, rifamycin, pentochloronitrobenzene and hymexazol (PARP-H). The quantification of pv. Begoniaceae on Petrifilm-AC was not significantly different ( < 0.05) than on PDA, but was lower than on Reasoner and Goldrich agar (R2A) or with a hemocytometer. The current formulation of Petrifilm-YM is unlikely to be a useful monitoring method for plant pathogens in irrigation water because of the inability to successfully culture oomycetes. However, Petrifilm-AC was an effective method to quantify bacteria and can provide an easy-to-use on-farm tool to monitor biofilm risk and microbial density. PMID:27380096

  15. Comparison of Agar Media for Detection and Quantification of Shiga Toxin-Producing Escherichia coli in Cattle Feces.

    PubMed

    Stromberg, Zachary R; Lewis, Gentry L; Moxley, Rodney A

    2016-06-01

    The isolation and quantification of non-O157 Shiga toxin-producing Escherichia coli (STEC) from cattle feces are challenging. The primary objective of this study was to evaluate the performance of selected agar media in an attempt to identify an optimal medium for the detection and quantification of non-O157 STEC in cattle feces. Comparison studies were performed using CHROMagar STEC, Possé differential agar (Possé), Possé modified by the reduction or addition of antimicrobials, STEC heart infusion washed blood agar with mitomycin C (SHIBAM), and SHIBAM modified by the addition of antimicrobials. Fourteen STEC strains, two each belonging to serogroups O26, O45, O103, O111, O121, O145, and O157, were used to test detection in inoculated fecal suspensions at concentrations of 10(2) or 10(3) CFU/g. One STEC strain from each of these seven serogroups was used to estimate the concentration of recovered STEC in feces inoculated at 10(3), 10(4), or 10(5) CFU/g. Significantly more suspensions (P < 0.05) were positive for STEC when plated on Possé containing reduced concentrations of novobiocin and potassium tellurite compared with SHIBAM, but not SHIBAM modified by containing these same antimicrobials at the same concentrations. Numerically, more suspensions were positive for STEC by using this same form of modified Possé compared with Possé, but this difference was not statistically significant. More suspensions were positive for STEC cultured on CHROMagar STEC compared with those on Possé (P < 0.05) and on modified Possé (P = 0.05). Most inoculated fecal suspensions below 10(4) CFU/g of feces were underestimated or not quantifiable for the concentration of STEC by using CHROMagar STEC or modified Possé. These results suggest that CHROMagar STEC performs better than Possé or SHIBAM for detection of STEC in bovine feces, but adjustments in the concentrations of novobiocin and potassium tellurite in the latter two media result in significant improvements in their

  16. Absorption of ethanol, acetone, benzene and 1,2-dichloroethane through human skin in vitro: a test of diffusion model predictions

    SciTech Connect

    Gajjar, Rachna M.; Kasting, Gerald B.

    2014-11-15

    The overall goal of this research was to further develop and improve an existing skin diffusion model by experimentally confirming the predicted absorption rates of topically-applied volatile organic compounds (VOCs) based on their physicochemical properties, the skin surface temperature, and the wind velocity. In vitro human skin permeation of two hydrophilic solvents (acetone and ethanol) and two lipophilic solvents (benzene and 1,2-dichloroethane) was studied in Franz cells placed in a fume hood. Four doses of each {sup 14}C-radiolabed compound were tested — 5, 10, 20, and 40 μL cm{sup −2}, corresponding to specific doses ranging in mass from 5.0 to 63 mg cm{sup −2}. The maximum percentage of radiolabel absorbed into the receptor solutions for all test conditions was 0.3%. Although the absolute absorption of each solvent increased with dose, percentage absorption decreased. This decrease was consistent with the concept of a stratum corneum deposition region, which traps small amounts of solvent in the upper skin layers, decreasing the evaporation rate. The diffusion model satisfactorily described the cumulative absorption of ethanol; however, values for the other VOCs were underpredicted in a manner related to their ability to disrupt or solubilize skin lipids. In order to more closely describe the permeation data, significant increases in the stratum corneum/water partition coefficients, K{sub sc}, and modest changes to the diffusion coefficients, D{sub sc}, were required. The analysis provided strong evidence for both skin swelling and barrier disruption by VOCs, even by the minute amounts absorbed under these in vitro test conditions. - Highlights: • Human skin absorption of small doses of VOCs was measured in vitro in a fume hood. • The VOCs tested were ethanol, acetone, benzene and 1,2-dichloroethane. • Fraction of dose absorbed for all compounds at all doses tested was less than 0.3%. • The more aggressive VOCs absorbed at higher levels than

  17. Experimental tests of a two-layer Monte Carlo-diffusion hybrid model for photon migration in the frequency domain

    NASA Astrophysics Data System (ADS)

    Faris, Gregory W.; Alexandrakis, George; Busch, David R.; Patterson, Michael S.

    2001-06-01

    We examine the ability to recover the optical properties of a two-layer turbid medium using multi-distance frequency domain reflectance measurements and a hybrid Monte Carlo-- diffusion model. Frequency domain measurements are performed on two-layer liquid tissue phantoms simulating skin on muscle and skin on fat. Particular care to systematic effects in the photomultiplier is required for the measurements at short source-detectors distances. The model converges when fitting five free parameters (the optical properties of the upper and lower layers and the upper layer thickness). However, discrepancies between experimental and model yield insufficient accuracy for the absorption coefficient of the upper layer.

  18. Effect of heat treatment on the performance of tryptose-sulfite-cycloserine agar for enumeration of Clostridium perfringens.

    PubMed Central

    Brodsky, M H; Ciebin, B W

    1979-01-01

    Dissolving dehydrated tryptose-sulfite-cycloserine agar by only boiling or microwaving was found to inhibit Clostridium perfringens colony development in pour plates when compared with C. perfringens recovery in tryptose-sulfite-cycloserine agar prepared by autoclaving. Images PMID:225988

  19. Effect of lignin on water vapor barrier, mechanical, and structural properties of agar/lignin composite films.

    PubMed

    Shankar, Shiv; Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2015-11-01

    Biodegradable composite films were prepared using two renewable resources based biopolymers, agar and lignin alkali. The lignin was used as a reinforcing material and agar as a biopolymer matrix. The effect of lignin concentration (1, 3, 5, and 10wt%) on the performance of the composite films was studied. In addition, the mechanical, water vapor barrier, UV light barrier properties, FE-SEM, and TGA of the films were analyzed. The agar/lignin films exhibited higher mechanical and UV barrier properties along with lower water vapor permeability compared to the neat agar film. The FTIR and SEM results showed the compatibility of lignin with agar polymer. The swelling ratio and moisture content of agar/lignin composite films were decreased with increase in lignin content. The thermostability and char content of agar/lignin composite films increased with increased lignin content. The results suggested that agar/lignin films have a potential to be used as a UV barrier food packaging material for maintaining food safety and extending the shelf-life of the packaged food. PMID:26271435

  20. Differentiating non-0157:H7 STEC serogroups from ground beef plated on agar media by hyperspetral imaging

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Introduction: The development of an assay to detect and confirm a positive non-O157:H7 isolate is challenging when mixed morphologically results are obtained from the serogroups growing on Rainbow agar. Rainbow agar is only claimed by the manufacturer to be very specific for E.coli O157:H7 strain...

  1. Absorption of ethanol, acetone, benzene and 1,2-dichloroethane through human skin in vitro: a test of diffusion model predictions.

    PubMed

    Gajjar, Rachna M; Kasting, Gerald B

    2014-11-15

    The overall goal of this research was to further develop and improve an existing skin diffusion model by experimentally confirming the predicted absorption rates of topically-applied volatile organic compounds (VOCs) based on their physicochemical properties, the skin surface temperature, and the wind velocity. In vitro human skin permeation of two hydrophilic solvents (acetone and ethanol) and two lipophilic solvents (benzene and 1,2-dichloroethane) was studied in Franz cells placed in a fume hood. Four doses of each (14)C-radiolabed compound were tested - 5, 10, 20, and 40μLcm(-2), corresponding to specific doses ranging in mass from 5.0 to 63mgcm(-2). The maximum percentage of radiolabel absorbed into the receptor solutions for all test conditions was 0.3%. Although the absolute absorption of each solvent increased with dose, percentage absorption decreased. This decrease was consistent with the concept of a stratum corneum deposition region, which traps small amounts of solvent in the upper skin layers, decreasing the evaporation rate. The diffusion model satisfactorily described the cumulative absorption of ethanol; however, values for the other VOCs were underpredicted in a manner related to their ability to disrupt or solubilize skin lipids. In order to more closely describe the permeation data, significant increases in the stratum corneum/water partition coefficients, Ksc, and modest changes to the diffusion coefficients, Dsc, were required. The analysis provided strong evidence for both skin swelling and barrier disruption by VOCs, even by the minute amounts absorbed under these in vitro test conditions. PMID:25283951

  2. How drugs get into cells: tested and testable predictions to help discriminate between transporter-mediated uptake and lipoidal bilayer diffusion

    PubMed Central

    Kell, Douglas B.; Oliver, Stephen G.

    2014-01-01

    One approach to experimental science involves creating hypotheses, then testing them by varying one or more independent variables, and assessing the effects of this variation on the processes of interest. We use this strategy to compare the intellectual status and available evidence for two models or views of mechanisms of transmembrane drug transport into intact biological cells. One (BDII) asserts that lipoidal phospholipid Bilayer Diffusion Is Important, while a second (PBIN) proposes that in normal intact cells Phospholipid Bilayer diffusion Is Negligible (i.e., may be neglected quantitatively), because evolution selected against it, and with transmembrane drug transport being effected by genetically encoded proteinaceous carriers or pores, whose “natural” biological roles, and substrates are based in intermediary metabolism. Despite a recent review elsewhere, we can find no evidence able to support BDII as we can find no experiments in intact cells in which phospholipid bilayer diffusion was either varied independently or measured directly (although there are many papers where it was inferred by seeing a covariation of other dependent variables). By contrast, we find an abundance of evidence showing cases in which changes in the activities of named and genetically identified transporters led to measurable changes in the rate or extent of drug uptake. PBIN also has considerable predictive power, and accounts readily for the large differences in drug uptake between tissues, cells and species, in accounting for the metabolite-likeness of marketed drugs, in pharmacogenomics, and in providing a straightforward explanation for the late-stage appearance of toxicity and of lack of efficacy during drug discovery programmes despite macroscopically adequate pharmacokinetics. Consequently, the view that Phospholipid Bilayer diffusion Is Negligible (PBIN) provides a starting hypothesis for assessing cellular drug uptake that is much better supported by the available

  3. Computational Analyses in Support of Sub-scale Diffuser Testing for the A-3 Facility. Part 2; Unsteady Analyses and Risk Assessment

    NASA Technical Reports Server (NTRS)

    Ahuja, Vineet; Hosangadi, Ashvin; Allgood, Daniel

    2008-01-01

    Simulation technology can play an important role in rocket engine test facility design and development by assessing risks, providing analysis of dynamic pressure and thermal loads, identifying failure modes and predicting anomalous behavior of critical systems. This is especially true for facilities such as the proposed A-3 facility at NASA SSC because of a challenging operating envelope linked to variable throttle conditions at relatively low chamber pressures. Design Support of the feasibility of operating conditions and procedures is critical in such cases due to the possibility of startup/shutdown transients, moving shock structures, unsteady shock-boundary layer interactions and engine and diffuser unstart modes that can result in catastrophic failure. Analyses of such systems is difficult due to resolution requirements needed to accurately capture moving shock structures, shock-boundary layer interactions, two-phase flow regimes and engine unstart modes. In a companion paper, we will demonstrate with the use of CFD, steady analyses advanced capability to evaluate supersonic diffuser and steam ejector performance in the sub-scale A-3 facility. In this paper we will address transient issues with the operation of the facility especially at startup and shutdown, and assess risks related to afterburning due to the interaction of a fuel rich plume with oxygen that is a by-product of the steam ejectors. The primary areas that will be addressed in this paper are: (1) analyses of unstart modes due to flow transients especially during startup/ignition, (2) engine safety during the shutdown process (3) interaction of steam ejectors with the primary plume i.e. flow transients as well as probability of afterburning. In this abstract we discuss unsteady analyses of the engine shutdown process. However, the final paper will include analyses of a staged startup, drawdown of the engine test cell pressure, and risk assessment of potential afterburning in the facility. Unsteady

  4. Evaluation of the mastascanelite image analysis system for measuring zones of inhibition in disc diffusion susceptibility tests.

    PubMed

    Clarke, R E H; Winstanley, T G; Ridgway, E J

    2003-01-01

    In this evaluation a mastascanelite image analysis system is compared with manual measurement of disc diffusion inhibition zones. Data for 213 diverse organisms and a total of 1679 organism/antibiotic combinations gave an overall correlation coefficient of 0.988. The mean difference between readings was +0.425 mm, with 95% confidence limits of +/-2.94 mm, and the majority of scanned zones (97.51%) fell within +/-3 mm of the manual measurement. The mastascanelite system forms part of a laboratory suite and was found to be objective, accurate and rapid, reading and interpreting each plate in less than a second. Interfacing to the laboratory computer system facilitated data handling and performance control. PMID:14560787

  5. Flow-Meter and Passive Diffusion Bag Tests and Potential Influences on the Vertical Distribution of Contaminants in Wells at Galena Airport, Galena, Alaska, August to October 2002

    USGS Publications Warehouse

    Vroblesky, Don A.; Peterson, J.E.

    2004-01-01

    Past activities at Galena Airport, a U.S. Air Force Base in Galena, Alaska, have resulted in ground-water contamination by volatile organic compounds. The primary contaminants are petroleum hydrocarbons and chlorinated aliphatic hydrocarbons. The U.S. Geological Survey and Earth Tech, in cooperation with the Air Force Center for Environmental Excellence, conducted investigations at Galena Airport from August to October 2002 using polyethylene diffusion bag samplers and borehole flow-meter testing to examine the vertical distribution of ground-water contamination in selected wells. This investigation was limited to the vicinity of building 1845 and to the area between building 1845 and the Yukon River. In addition, the U.S. Geological Survey was asked to determine whether additional wells are needed to more clearly define the nature and extent of the ground-water contamination at the Air Force Base. Little or no vertical water movement occurred under ambient conditions in the wells tested at Galena Airport, Alaska, in August 2002. All of the ambient vertical flows detected in wells were at rates less than the quantitative limit of the borehole flow meter (0.03 gallons per minute). In wells 06-MW-07 and 10-MW-01, no vertical flow was detected. In wells where ambient flow was detected, the direction of flow was downward. In general, concentrations of volatile organic compounds detected in the low-flow samples from wells at Galena Airport were approximately the same concentrations detected in the closest polyethylene diffusion bag sample for a wide variety of volatile organic compounds. The data indicate that the polyethylene diffusion bag sample results are consistent with the low-flow sample results. Vertical profiling of selected wells using polyethylene diffusion bag samplers at Galena Airport showed that from September 30 to October 1, 2002, little vertical change occurred in volatile organic compound concentrations along the screen length despite the fact that

  6. Characterization of gelatin-agar based phase separated hydrogel, emulgel and bigel: a comparative study.

    PubMed

    Wakhet, Senggam; Singh, Vinay K; Sahoo, Saikat; Sagiri, Sai Sateesh; Kulanthaivel, Senthilguru; Bhattacharya, Mrinal K; Kumar, Naresh; Banerjee, Indranil; Pal, Kunal

    2015-02-01

    The current study describes the in-depth characterization of agar-gelatin based co-hydrogels, emulgels and bigels to have an insight about the differences in the properties of the formulations. Hydrogels have been extensively studied as vehicle for controlled drug release, whereas, the concept of emulgels and bigels is relatively new. The formulations were characterized by scanning electron microscopy, FTIR spectroscopy, XRD and mechanical properties. The biocompatibility and the ability of the formulations to be used as drug delivery vehicle were also studied. The scanning electron micrographs suggested the presence of internal phases within the agar-gelatin composite matrices of co-hydrogel, emulgel and bigel. FTIR and XRD studies suggested higher crystallinity of emulgels and bigels. Electrical impedance and mechanical stability of the emulgel and the bigel was higher than the hydrogel. The prepared formulations were found to be biocompatible and suitable for drug delivery applications. PMID:25672596

  7. Effect of Soybean Casein Digest Agar Lot on Number of Bacillus stearothermophilus Spores Recovered †

    PubMed Central

    Pflug, I. J.; Smith, Geraldine M.; Christensen, Ronald

    1981-01-01

    In recent years it has become increasingly apparent that Bacillus stearothermophilus spores are affected by various environmental factors that influence the performance of the spores as biological indicators. One environmental factor is the recovery medium. The effect of different lots of commercial soybean casein digest agar on the number of colony-forming units per plate was examined in two series of experiments: (i) several lots of medium from two manufacturers were compared in single experiments, and (ii) paired media experiments with four lots of medium were carried out and yielded three-point survivor curves. The results demonstrate that commercial soybean casein digest agar is variable on a lot-to-lot basis. The variation was lowest when recovering unheated or minimally heated spores and increased greatly with the severity of heating. PMID:16345822

  8. Effect of Soybean Casein Digest Agar Lot on Number of Bacillus stearothermophilus Spores Recovered.

    PubMed

    Pflug, I J; Smith, G M; Christensen, R

    1981-08-01

    In recent years it has become increasingly apparent that Bacillus stearothermophilus spores are affected by various environmental factors that influence the performance of the spores as biological indicators. One environmental factor is the recovery medium. The effect of different lots of commercial soybean casein digest agar on the number of colony-forming units per plate was examined in two series of experiments: (i) several lots of medium from two manufacturers were compared in single experiments, and (ii) paired media experiments with four lots of medium were carried out and yielded three-point survivor curves. The results demonstrate that commercial soybean casein digest agar is variable on a lot-to-lot basis. The variation was lowest when recovering unheated or minimally heated spores and increased greatly with the severity of heating. PMID:16345822

  9. Field tests of nylon-screen diffusion samplers and pushpoint samplers for detection of metals in sediment pore water, Ashland and Clinton, Massachusetts, 2003

    USGS Publications Warehouse

    Zimmerman, Marc J.; Vroblesky, Don A.; Campo, Kimberly W.; Massey, Andrew J.; Scheible, Walter

    2005-01-01

    Efficient and economical screening methods are needed to detect and to determine the approximate concentrations of potentially toxic trace-element metals in shallow groundwater- discharge areas (pore water) where the metals may pose threats to aquatic organisms; such areas are likely to be near hazardous-waste sites. Pushpoint and nylon-screen diffusion samplers are two complementary options for use in such environments. The pushpoint sampler, a simple well point, is easy to insert manually and to use. Only 1 day is required to collect samples. The nylon-screen diffusion sampler is well suited for use in sediments that do not allow a pump to draw water into a pushpoint sampler. In this study, both types of devices were used in sediments suitable for the use of the pushpoint sampler. Sampling with the nylon-screen diffusion sampler requires at least two site visits: one to deploy the samplers in the sediment, and a second to retrieve the samplers and collect the samples after a predetermined equilibration period. Extensive laboratory quality-control studies, field testing, and laboratory analysis of samples collected at the Nyanza Chemical Waste Dump Superfund site along the Sudbury River in Ashland, Massachusetts, and at a Superfund site-assessment location on Rigby Brook in Clinton, Massachusetts, indicate that these two devices yield comparable results for most metals and should be effective tools for pore-water studies. The nylon-screen diffusion samplers equilibrated within 1-2 days in homogeneous, controlled conditions in the laboratory. Nylon-screen diffusion samplers that were not purged of dissolved oxygen prior to deployment yielded results similar to those that were purged. Further testing of the nylon-screen diffusion samplers in homogeneous media would help to resolve any ambiguities about the data variability from the field studies. Comparison of data from replicate samples taken in both study areas shows that even samples taken from sites within a

  10. Holographic diffusers

    NASA Astrophysics Data System (ADS)

    Wadle, Stephen; Wuest, Daniel; Cantalupo, John; Lakes, Roderic S.

    1994-01-01

    Holographic diffusers are prepared using silver halide (Agfa 8E75 and Kodak 649F) and photopolymer (Polaroid DMP 128 and DuPont 600, 705, and 150 series) media. It is possible to control the diffusion angle in three ways: by selection of the properties of the source diffuser, by control of its subtended angle, and by selection of the holographic medium. Several conventional diffusers based on refraction or scattering of light are examined for comparison.

  11. Co-precipitation with PVP and Agar to Improve Physicomechanical Properties of Ibuprofen

    PubMed Central

    Maghsoodi, Maryam; Kiafar, Farhad

    2013-01-01

    Objective(s) : Ibuprofen is a problematic drug in tableting due to its viscoelastic properties. Additionally its high cohesivity results in low flowability. In this study, co-precipitation of ibuprofen with varying concentration of agar and PVP to optimize properties of Ibuprofen was carried out. Materials and Methods: Co-precipitates of ibuprofen- PVP or agar were prepared by solvent evaporation technique under vacuum condition. Differential scanning calorimetry (DSC), X -ray diffraction of powder (XRDP) and FT-IR spectroscopy were used to investigate the solid state characteristics of the co-precipitates. The dissolution behavior, flowability, particle size and compaction properties of various batches were also studied. Results: Co-precipitation of drug with agar led to a change in habit from needle to plate shape crystals, while drug –PVP co-precipitates had agglomerated structure and consisted of numerous crystals which had been aggregated together. The co-precipitates showed improved flow properties compared with ibuprofen alone. Precipitation of ibuprofen with these additives led to modification in the dissolution of the drug. Agar in 1% w/w improved slightly the dissolution rate of drug while PVP had a negative impact and led to reduction in the dissolution rate of drug to less than that of pure drug. The all obtained co-precipitates exhibited significantly improved tableting behavior compared with drug crystals alone. This may be due to this fact that, the polymer covering the drug particles increases and changes the nature of the surface area available for interparticulate bonds between particles. DSC, XRDP and FT-IR experiments showed that drug particles, in co-precipitates samples, did not undergo polymorphic modifications. Conclusion: The study highlights the influence of polymeric additives on crystallization process leading to modified performance. PMID:24250942

  12. Co-precipitation with PVP and Agar to Improve Physicomechanical Properties of Ibuprofen

    PubMed Central

    Maghsoodi, Maryam; Kiafar, Farhad

    2013-01-01

    Objective(s) : Ibuprofen is a problematic drug in tableting due to its viscoelastic properties. Additionally its high cohesivity results in low flowability. In this study, co-precipitation of ibuprofen with varying concentration of agar and PVP to optimize properties of Ibuprofen was carried out. Materials and Methods: Co-precipitates of ibuprofen- PVP or agar were prepared by solvent evaporation technique under vacuum condition. Differential scanning calorimetry (DSC), X -ray diffraction of powder (XRDP) and FT-IR spectroscopy were used to investigate the solid state characteristics of the co-precipitates. The dissolution behavior, flowability, particle size and compaction properties of various batches were also studied. Results: Co-precipitation of drug with agar led to a change in habit from needle to plate shape crystals, while drug –PVP co-precipitates had agglomerated structure and consisted of numerous crystals which had been aggregated together. The co-precipitates showed improved flow properties compared with ibuprofen alone. Precipitation of ibuprofen with these additives led to modification in the dissolution of the drug. Agar in 1% w/w improved slightly the dissolution rate of drug while PVP had a negative impact and led to reduction in the dissolution rate of drug to less than that of pure drug. The all obtained co-precipitates exhibited significantly improved tableting behavior compared with drug crystals alone. This may be due to this fact that, the polymer covering the drug particles increases and changes the nature of the surface area available for interparticulate bonds between particles. DSC, XRDP and FT-IR experiments showed that drug particles, in co-precipitates samples, did not undergo polymorphic modifications. Conclusion: The study highlights the influence of polymeric additives on crystallization process leading to modified performance. PMID:24250936

  13. Diffusion MRI

    NASA Astrophysics Data System (ADS)

    Fukuyama, Hidenao

    Recent advances of magnetic resonance imaging have been described, especially stressed on the diffusion sequences. We have recently applied the diffusion sequence to functional brain imaging, and found the appropriate results. In addition to the neurosciences fields, diffusion weighted images have improved the accuracies of clinical diagnosis depending upon magnetic resonance images in stroke as well as inflammations.

  14. Alternative plasticizers for the production of thermo-compressed agar films.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Liu, LinShu; Gonçalves, Maria P

    2015-05-01

    Agar films were produced by thermo-compression using choline chloride (ChCl) as a plasticizer with urea. The three solid components were mixed together with the salt and urea (minor components) added to agar (main component) according to a fixed mass ratio of, respectively, 1.16:1:5. A central composite rotatable design (CCRD) with three parameters, 2(3), was used to evaluate the effects of temperature (X1; °C), time (X2; min) and applied load (X3; kN) of heat-pressing on the maximum tensile strength (TS) of the films (Y; MPa). Mixtures of urea and agar prepared at a mass ratio of 1:5 did not form homogeneous films suggesting the important plasticizing role of the salt. Heat-pressing the mixtures at more draconian conditions led to much darker and opaque films, with better mechanical resistance (higher values of TS). The most resistant film (∼ 15 MPa) was obtained at 140°C, 20 min and 176 kN. Selected films, including the optimal, showed similar water sorption profiles and close values of water vapor permeability (∼ 2.5-3.7 × 10(-9)gm(-1)s(-1)Pa(-1)). The fracture behavior and mechanical properties of the films were greatly affected by additional water plasticization when the films were stored at different conditions of relative humidity. PMID:25727746

  15. Evaluation of cephamycins as supplements to selective agar for detecting Campylobacter spp. in chicken carcass rinses.

    PubMed

    Chon, Jung-Whan; Kim, Young-Ji; Kim, Hong-Seok; Kim, Dong-Hyeon; Kim, Hyunsook; Song, Kwang-Young; Sung, Kidon; Seo, Kun-Ho

    2016-04-16

    Although cefoperazone is the most commonly used antibiotic in Campylobacter-selective media, the distribution of cefoperazone-resistant bacteria such as extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli is increasing. Here we evaluated the potential of cephamycins for use as supplements to improve modified charcoal-cefoperazone-deoxycholate agar (mCCDA) by replacing cefoperazone with the same concentrations (32 mg/L) of cefotetan (modified charcoal-cefotetan-deoxycholate agar, mCCtDA) and cefoxitin (modified charcoal-cefoxitin-deoxycholate agar, mCCxDA). In chicken carcass rinse samples, the number of mCCDA plates detecting for Campylobacter (18/70, 26%) was significantly lower than that of mCCtDA (42/70, 60%) or mCCxDA plates (40/70, 57%). The number of mCCDA plates (70/70, 100%) that were contaminated with non-Campylobacter species was significantly higher than that of mCCtDA (20/70, 29%) or mCCxDA plates (21/70, 30%). The most common competing species identified using mCCDA was ESBL-producing E. coli, while Pseudomonas species frequently appeared on mCCtDA and mCCxDA. PMID:26915052

  16. Agar Plate Method for Detection and Enumeration of Alkylbenzenesulfonate-Degrading Microorganisms

    PubMed Central

    Ohwada, Kouichi

    1975-01-01

    A simple method for detection and enumeration of alkylbenzenesulfonate (ABS)-degrading microorganisms by using agar plates was developed and used in microbiological studies of coastal marine and polluted river waters. The method depends upon the color responses of neutral red in alkaline medium. Neutral red changes from pink, when it enters into ABS micelles, to yellow, when the ABS is degraded, and does not form micelles. When neutral red-tris(hydroxymethyl)-aminomethane buffer solution and then cationic surfactant solution were sprayed onto the agar surface of ABS-nutrient agar cultures, transparent haloes appeared around the colonies of ABS-degrading microorganisms against a pink background. Viable counts of ABS-degrading bacteria isolated from both seawater and freshwater environments were considerably higher in polluted waters than in less polluted areas. Viable counts of ABS-degrading bacteria averaged 1.5 × 105/ml in samples from the surface water of polluted Tokyo Bay and 3.0 × 104/ml in samples from the surface water of polluted Tamagawa River but were fewer in number in samples from less polluted waters. Images PMID:234155

  17. Isolation of Clostridium difficile from faecal specimens--a comparison of chromID C. difficile agar and cycloserine-cefoxitin-fructose agar.

    PubMed

    Carson, Kerry C; Boseiwaqa, Lusiana V; Thean, Sara K; Foster, Niki F; Riley, Thomas V

    2013-09-01

    The culture of toxigenic Clostridium difficile from stool specimens is still seen as the gold standard for the laboratory diagnosis of C. difficile infection (CDI). bioMérieux have released ChromID Cdiff chromogenic agar (CDIF) for the isolation and identification of C. difficile in 24 h. In this study, we compared CDIF to pre-reduced cycloserine-cefoxitin-fructose agar with sodium taurocholate (TCCFA) in the examination of glutamate dehydrogenase-positive faecal specimens that were either GeneOhm positive or negative, using direct culture or culture following alcohol shock. Direct culture on CDIF had a sensitivity of 100 % and recovery of 94 % while for TCCFA these were 87 % and 82 %, respectively. For GeneOhm-positive alcohol-shocked faecal samples, sensitivity and recovery on CDIF was similar to direct culture while on TCCFA they were about 10 % higher. For direct culture, there was a significant difference between growth on CDIF at 24 h and TCCFA at 48 h (P = 0.001) and between the two media at 48 h (P<0.001). A total of 142 strains of C. difficile were recovered in pure culture from all GeneOhm-positive samples used in this study and 11 (7.7 %) of these were A(-)B(-)CDT(-) and may represent mixed infections of toxigenic and non-toxigenic C. difficile. The most dominant ribotype was UK 014 (14.7 %) followed by 002 (11.9 %) and 020 (11.9 %), and 36 % of toxigenic isolates, including an A(-)B(+)CDT(-) strain, could not be assigned a UK ribotype. CDIF outperformed pre-reduced TCCFA by negating the need for alcohol shock treatment and by giving a time saving of 24 h in the isolation of C. difficile. CDIF plates were also more selective than TCCFA and C. difficile colonies were easy to identify and subculture prior to strain typing. PMID:23579394

  18. AgarTrap-mediated genetic transformation using intact gemmae/gemmalings of the liverwort Marchantia polymorpha L.

    PubMed

    Tsuboyama-Tanaka, Shoko; Kodama, Yutaka

    2015-03-01

    The dioecious liverwort, Marchantia polymorpha L., is an emerging model plant. Various molecular biological techniques have been optimized for M. polymorpha for the past several years, and recently we reported a simplified Agrobacterium-mediated transformation method using sporelings (immature thalli from spores) of M. polymorpha. This method, termed AgarTrap (Agar-utilized Transformation with Pouring Solutions), completed by exchanging appropriate solutions on a single Petri dish to produce a sufficient number of independent transgenic sporelings. However, because spores are produced by crosses between males and females, the genetic backgrounds of resulting transgenic sporelings are not uniform. To easily produce transgenic liverworts with a uniform genetic background using AgarTrap, we developed an AgarTrap-mediated transformation method using intact gemmae/gemmalings produced by asexual reproduction. Using AgarTrap with male and female gemmae/gemmalings produced a sufficient number of independent transgenic gemmalings with uniform genetic backgrounds. The optimized transformation efficiencies were approximately 30 and 50 % in males and females, respectively. As with AgarTrap using sporelings, AgarTrap using intact gemmae/gemmalings will be useful in promoting studies of the molecular biology of M. polymorpha. PMID:25663453

  19. Summary of micrographic analysis of selected core samples from Well ER-20-6{number_sign}1 in support of matrix diffusion testing

    SciTech Connect

    IT Corporation, Las Vegas

    1998-09-25

    ER-20-6{number_sign}1 was cored to determine fracture and lithologic properties proximal to the BULLION test cavity. Selected samples from ER-20-6{number_sign}1 were subjected to matrix and/or fracture diffusion experiments to assess solute movement in this environment. Micrographic analysis of these samples suggests that the similarity in bulk chemical composition results in very similar mineral assemblages forming along natural fractures. These samples are all part of the mafic-poor Calico Hills Formation and exhibit fracture-coating mineral assemblages dominated by mixed illite/smectite clay and illite, with local opaline silica (2,236 and 2, 812 feet), and zeolite (at 2,236 feet). Based on this small sample population, the magnitude to which secondary phases have formed on fracture surfaces bears an apparently inverse relationship to the competency of the host lithology, reflected by variations in the degree of fracturing and the development of secondary phases on fracture surfaces. In the flow breccia at 2,851 feet, thinly developed, localized coatings are developed along persistent open fracture apertures in this competent rock type. Fractures in the devitrified lava from 2,812 feet are irregular, and locally blocked by secondary mineral phases. Natural fractures on the zeolitized tuff from 2,236 feet are discontinuous and irregular and typically obstructed with secondary mineral phases. There are also a second set of clean fractures in the 2,236 foot sample which lack secondary mineral phases and are interpreted to have been induced by the BULLION test. Based on these results, it is expected that matrix diffusion will be enhanced in samples where potentially transmissive fractures exhibit the greatest degree of obstruction (2,236>2,812=2,835>2,851). It is unclear what influence the induced fractures observed at 2,236 feet may have on diffusion given the lack of knowledge on their extent. It is assumed that the bulk matrix diffusion characteristics of the

  20. Correlation between Agar Plate Screening and Solid-State Fermentation for the Prediction of Cellulase Production by Trichoderma Strains.

    PubMed

    Florencio, Camila; Couri, Sonia; Farinas, Cristiane Sanchez

    2012-01-01

    The viability of converting biomass into biofuels and chemicals still requires further development towards the reduction of the enzyme production costs. Thus, there is a growing demand for the development of efficient procedures for selection of cellulase-producing microorganisms. This work correlates qualitative screening using agar plate assays with quantitative measurements of cellulase production during cultivation under solid-state fermentation (SSF). The initial screening step consisted of observation of the growth of 78 preselected strains of the genus Trichoderma on plates, using microcrystalline cellulose as carbon source. The 49 strains that were able to grow on this substrate were then subjected to a second screening step using the Congo red test. From this test it was possible to select 10 strains that presented the highest enzymatic indices (EI), with values ranging from 1.51 to 1.90. SSF cultivations using sugarcane bagasse and wheat bran as substrates were performed using selected strains. The CG 104NH strain presented the highest EGase activity (25.93 UI·g(-1)). The EI results obtained in the screening procedure using plates were compared with cellulase production under SSF. A correlation coefficient (R(2)) of 0.977 was obtained between the Congo red test and SSF, demonstrating that the two methodologies were in good agreement. PMID:23227312

  1. Inpainting using airy diffusion

    NASA Astrophysics Data System (ADS)

    Lorduy Hernandez, Sara

    2015-09-01

    One inpainting procedure based on Airy diffusion is proposed, implemented via Maple and applied to some digital images. Airy diffusion is a partial differential equation with spatial derivatives of third order in contrast with the usual diffusion with spatial derivatives of second order. Airy diffusion generates the Airy semigroup in terms of the Airy functions which can be rewritten in terms of Bessel functions. The Airy diffusion can be used to smooth an image with the corresponding noise elimination via convolution. Also the Airy diffusion can be used to erase objects from an image. We build an algorithm using the Maple package ImageTools and such algorithm is tested using some images. Our results using Airy diffusion are compared with the similar results using standard diffusion. We observe that Airy diffusion generates powerful filters for image processing which could be incorporated in the usual packages for image processing such as ImageJ and Photoshop. Also is interesting to consider the possibility to incorporate the Airy filters as applications for smartphones and smart-glasses.

  2. [Antimicrobial susceptibility testing of anaerobic bacteria].

    PubMed

    García-Sánchez, José E; García-Sánchez, Enrique; García-García, María Inmaculada

    2014-02-01

    The anaerobic bacteria resistance to antibiotics is increasing, and even has appeared against the most active of those, like metronidazol and carbapenems. This fact forces to make and periodical sensibility tests -at least in the most aggressive and virulent species, in cases that they are isolated from life locations and in the absence of therapeutic response- to check the local sensibility and to establish suitable empiric therapies, all based on multicentric studies carried out in order to this or well to check the activity of new antibiotics. For the laboratory routine, the easiest sensibility method is the E-test/MIC evaluator. Another alternative is microdilution, that's only normalized for Bacteroides. There are preliminary facts that allow the use of disc diffusion method in some species of Bacteroides and Clostridium. For the temporal and multicentric studies, the procedure is dilution in agar plate, the reference method. PMID:24630580

  3. Irradiance calibration with solar diffuser

    NASA Technical Reports Server (NTRS)

    Haring, Robert E. (Inventor); Roeder, Herbert A. (Inventor); Hartmann, Ulli G. (Inventor)

    1993-01-01

    The sun's energy is used in combination of movable and fixed diffuser plates, windows and apertures which are positioned in a series of test sequences (modes) for reflectance monitoring and calibration without the use of man-made sources. There are three embodiments, or implementations, of the invention--one embodiment uses two diffusers--a working diffuser and a secondary diffuser--the second embodiment uses three diffusers, a working diffuser, a secondary diffuser and a reference diffuser--and the third embodiment uses two diffusers--a working diffuser and a secondary diffuser, the latter also functioning as a cover for the working diffuser. The movable diffusers are mounted on rotatable cones and, in all embodiments, the sun is blocked from reaching the diffusers when not in use. Thus, the sun is used as a stable source for calibration and monitoring and the sun/diffuser combination is used in such a way that the response of all elements of the optical subsystem of the TOMS can be unambiguously and efficiently characterized with high accuracy and precision.

  4. Comparative evaluation of chromogenic agar medium and conventional culture system for isolation and presumptive identification of uropathogens

    PubMed Central

    Akter, Laila; Haque, Rezwana; Salam, Md. Abdus

    2014-01-01

    Objective: Urine is the most frequent specimen received for culture/sensitivity by clinical laboratories. The microbiological performance of HiCrome UTI agar medium was compared with Blood agar and MacConkey agar for isolation and presumptive identification of bacteria from urine culture. Methods: A total of 443 consecutively collected midstream and/or catheter-catch urine samples from patients attending the Islami Bank Medical College Hospital, Rajshahi, Bangladesh during January to December, 2012 were cultured. Urine samples showing pus cells ≥ 5/HPF were inoculated on to Blood agar (BA), MacConkey agar (MAC) and HiCrome UTI agar (CA) media simultaneously and incubated overnight aerobically at 370C. Rate of isolation and presumptive identification of bacterial species were compared for different media. Results: Culture yielded a total of 199 bacterial isolates from 189 (42.67%) positive plates including 179 (40.40%) unimicrobial and 10 (2.26%) polymicrobial (mixed growth of pair of bacteria) growths. Both HiCrome UTI agar and Blood agar media supported 100% growths while 151 (75.88%) growths were observed on MacConkey agar. The rate of presumptive identification was found significantly higher on HiCrome UTI agar (97.49%) than MAC agar (67.34%) (P<0.001) as primary urine culture medium. Of 199 isolates, E. coli was found to be the leading uropathogen isolated from 118 (59.30%) samples with its presumptive identification rate of 95.76%, 93.22% and 5.93% on CA, MAC and BA respectively. All 10 (100%) polymicrobial growths were demonstrated distinctly on CA against only 01(10%) on each BA and MAC. Conclusion: HiCrome UTI agar was found to be more useful as primary urine culture medium in both higher rate of isolation and presumptive identification of uropathogens in comparison to conventional media. Its inherent characteristics in demonstrating polymicrobial growth and ease of rapid identification by distinct colony colour are unique. PMID:25225521

  5. ET-06PRECLINICAL TESTING OF THE HISTONE DEACETYLASE INHIBITOR, PANOBINOSTAT, IN A GENETICALLY ENGINEERED DIFFUSE INTRINSIC PONTINE GLIOMA MOUSE MODEL

    PubMed Central

    Barton, Kelly; Misuraca, Katie; Becher, Oren

    2014-01-01

    Diffuse Intrinsic Pontine Glioma (DIPG) is a type of incurable pediatric brain tumor with a dismal outcome. With overall survival of less than one year, and no therapeutic advancements over the last three decades, gaining a better understanding of how to treat these deadly tumors is crucial. Recent genomic analysis has revealed that nearly 80% of DIPGS harbor a K27M mutation in histone H3.3 (K27M H3.3) or histone H3.1 (K27M H3.1). In an effort to elucidate novel therapeutics to treat DIPG, we examined Panobinostat, a potent pan-histone deacetylase inhibitor (HDACi) currently in clinical trials for a variety of different cancers. HDACi are a promising new class of agents known to have multiple target effects. Panobinostat targets HDACs in Classes I, II and IV and can cause disruption of genes involved in cell cycle control, apoptosis, DNA damage repair, and differentiation. To determine the effect of Panobinostat on DIPG, we utilized cell lines derived from a genetically engineered DIPG mouse model driven by PDGF-B overexpression, p53 loss, and either K27M or WT H3.3. Our results indicate that Panobinostat is highly effective at low nanomolar concentrations (<50nM), decreasing proliferation and viability, and increasing apoptosis in a dose dependent manner. Furthermore, utilizing isogenic lines we found the sensitivity of DIPG cells to Panobinostat to be independent of their H3.3 mutational status and that both K27M H3.3 and WT H3.3 lines were equally susceptible to treatment. In conclusion, murine DIPG cell lines, both with and without the K27M H3.3 mutation, show high sensitivity to Panobinostat in vitro. We are currently investigating its efficacy in vivo with hopes of translation to the clinic as a new therapeutic avenue for DIPG.

  6. Patients with diffuse uveitis and inactive toxoplasmic retinitis lesions test PCR positive for Toxoplasma gondii in their vitreous and blood

    PubMed Central

    Novais, Eduardo A; Commodaro, Alessandra G; Santos, Fábio; Muccioli, Cristina; Maia, André; Nascimento, Heloisa; Moeller, Cecilia T A; Rizzo, Luiz V; Grigg, Michael E; Belfort, Rubens

    2016-01-01

    Background/aims To determine if patients with inactive chorioretinitis lesions who experience chronic toxoplasmic uveitis test PCR positive for Toxoplasma in their ocular fluids. Methods Two patients undergoing long-term anti-toxoplasmic treatment developed chronic uveitis and vitritis. They underwent therapeutic and diagnostic pars plana vitrectomy. Patient specimens were tested for toxoplasmosis by real-time PCR and nested PCR. Patient specimens were also tested for the presence of Toxoplasma antibodies that recognise allelic peptide motifs to determine parasite serotype. Results Patients tested positive for Toxoplasma by real-time PCR at the B1 gene in the vitreous and aqueous humours of patient 1, but only the vitreous of patient 2. Patients were not parasitemic by real-time PCR in plasma and blood. During surgery, only old hyperpigmented toxoplasmic scars were observed; there was no sign of active retinitis. Multilocus PCR–DNA sequence genotyping at B1, NTS2 and SAG1 loci established that two different non-archetypal Toxoplasma strains had infected patients 1 and 2. A peptide-based serotyping ELISA confirmed the molecular findings. Conclusions No active lesions were observed, but both patients possessed sufficient parasite DNA in their vitreous to permit genotyping. Several hypotheses to explain the persistence of the vitritis and anterior uveitis in the absence of active retinitis are discussed. PMID:24518074

  7. Experiments on a wind turbine blade testing an indication for damage using the causal and anti-causal Green's function reconstructed from a diffuse field

    NASA Astrophysics Data System (ADS)

    Tippmann, Jeffery D.; Lanza di Scalea, Francesco

    2014-03-01

    The increasing demand for renewable and clean power generation has resulted in increasing sizes of rotor blades in wind turbine systems. The demanding and variable operational environments have introduced the need for structural health monitoring systems in the blades in order to prevent unexpected downtime events in the operation of the power plant. Many non-destructive evaluation methods used for structural health monitoring purposes need external excitation sources. However, several systems already accepted in the wind turbine industry are passive. Here we present a new approach to health monitoring of a wind turbine blade using only passive sensors and the existing noise created on the blade during operation. This is achieved using a known method to reconstruct the causal and anticausal time-domain Green's function between any two points in an array of passive sensors placed in a diffuse field. Damage is indicated when the similarity between the causal and anticausal signals decrease due to nonlinearities introduced from structural damage. This method was studied experimentally using a CX-100 wind turbine test blade located at the UCSD's Powell Structural Laboratories where a diffuse field was approximated by exciting the skin of the blade with a random signal at several locations.

  8. In Situ XPS Chemical Analysis of MnSiO3 Copper Diffusion Barrier Layer Formation and Simultaneous Fabrication of Metal Oxide Semiconductor Electrical Test MOS Structures.

    PubMed

    Byrne, Conor; Brennan, Barry; McCoy, Anthony P; Bogan, Justin; Brady, Anita; Hughes, Greg

    2016-02-01

    Copper/SiO2/Si metal-oxide-semiconductor (MOS) devices both with and without a MnSiO3 barrier layer at the Cu/SiO2 interface have been fabricated in an ultrahigh vacuum X-ray photoelectron spectroscopy (XPS) system, which allows interface chemical characterization of the barrier formation process to be directly correlated with electrical testing of barrier layer effectiveness. Capacitance voltage (CV) analysis, before and after tube furnace anneals of the fabricated MOS structures showed that the presence of the MnSiO3 barrier layer significantly improved electric stability of the device structures. Evidence of improved adhesion of the deposited copper layer to the MnSiO3 surface compared to the clean SiO2 surface was apparent both from tape tests and while probing the samples during electrical testing. Secondary ion mass spectroscopy (SIMS) depth profiling measurements of the MOS test structures reveal distinct differences of copper diffusion into the SiO2 dielectric layers following the thermal anneal depending on the presence of the MnSiO3 barrier layer. PMID:26732185

  9. Multicenter Evaluation of MRSASelect II Chromogenic Agar for Identification of Methicillin-Resistant Staphylococcus aureus from Wound and Nasal Specimens

    PubMed Central

    Newton, Duane W.; Ledeboer, Nathan A.; Young, Carol; Clark, Andrew E.; Connoly, Jessica; Wolk, Donna M.

    2015-01-01

    Hospitals strive to reduce methicillin-resistant Staphylococcus aureus (MRSA) prevalence via active surveillance of inpatient populations. Rapid and inexpensive screening methods are utilized when molecular methods are not operationally feasible. In this multisite clinical trial, the utility of Bio-Rad's MRSASelect II was evaluated for MRSA identification from remnant nares and wound swabs. The prevalence of MRSA was 11.1% (n = 1,384) from nares samples and 18.1% (n = 842) from wound samples. MRSASelect II had an overall concordance of 95.4% (confidence interval [CI] = 94.5% to 96.2%) compared to a broth-enriched reference standard. Comparisons between results, stratified by examination times, exhibited a nonsignificant trend toward increased positivity at prolonged incubation times. Cefoxitin screening of colonies directly from MRSASelect II was 96.7% (95.8% to 97.3%) concordant compared to testing of colonies following broth enrichment. A comparison of MRSASelect and MRSASelect II revealed no statistical differences; however, the latter exhibited earlier positivity, greater selectivity, and more intense indicator staining, which resulted in facilitated differentiation of positive results. MRSASelect II agar is a simple, rapid, and robust method to routinely screen patients for MRSA colonization without the need for additional testing. PMID:26582836

  10. Activity of fosfomycin and comparison of several susceptibility testing methods against contemporary urine isolates.

    PubMed

    Hirsch, Elizabeth B; Raux, Brian R; Zucchi, Paola C; Kim, Yisu; McCoy, Christopher; Kirby, James E; Wright, Sharon B; Eliopoulos, George M

    2015-12-01

    Fosfomycin is recommended as first-line treatment for acute uncomplicated cystitis in women. It has demonstrated in vitro activity against a variety of pathogens; however, a paucity of data are available from the USA. We determined the susceptibility of a collection of urine isolates to fosfomycin and compared multiple methods of susceptibility testing. Consecutive non-duplicate Enterobacteriaceae, enterococci and Pseudomonas aeruginosa isolates were collected from the clinical microbiology laboratory between August 2013 and January 2014. Isolates represented hospitalised or emergency department patients with monomicrobial bacteriuria. Fosfomycin MICs were determined in duplicate, on separate days, by Etest and disk diffusion and results were compared with agar dilution. Nitrofurantoin and ciprofloxacin were used as comparators. MIC results were categorised using Clinical and Laboratory Standards Institute interpretive criteria for Escherichia coli and Enterococcus faecalis. Correlation between the three testing methods was evaluated. Overall susceptibility to fosfomycin was 94.4%, 93.5% and 87.9% by agar dilution, disk diffusion and Etest, respectively. Five fosfomycin-resistant isolates were identified, including two Morganella morganii, one P. aeruginosa, one Proteus mirabilis and one Enterobacter aerogenes. Across all organisms, rates of essential agreement, categorical agreement, minor errors, major errors and very major errors for Etest/disk diffusion compared with agar dilution were 77.3%/NA, 89.5/93.8%, 7.1/5.0%, 3.6/1.3% and 0/0%, respectively. Fosfomycin displayed fairly consistent activity against a majority of isolates collected when using the susceptibility breakpoint of 64 μg/mL. MICs for E. coli were particularly low (≤2 μg/mL). These data lend support to current guidelines that recommend fosfomycin as empirical first-line therapy for uncomplicated UTI. PMID:26498988

  11. ACINETOBACTER SPP.: DISTINCT MORPHOLOGY ON EOSIN METHYLENE BLUE AGAR AS AN AID TO IDENTIFICATION IN DRINKING WATER

    EPA Science Inventory

    'Acinetobacter calcoaceticus', frequently found in drinking waters and implicated in nosocomial infections, was presumptively identified by its tiny, blue colonial appearance on Levine eosin methylene blue agar. All of the 33 isolates from drinking water showing this distinctive ...

  12. Diffuse optical imaging of the breast using structured-light

    NASA Astrophysics Data System (ADS)

    Kwong, Jessica; Nouizi, Farouk; Cho, Jaedu; Zheng, Jie; Li, Yifan; Chen, Jeon-hor; Su, Min-Ying; Gulsen, Gultekin

    2015-03-01

    Diffuse optical imaging with structured-light illumination and detection can provide rapid, wide-field anatomical and functional imaging of the breast with an application for breast cancer screening. Our aims for this study were to test the feasibility of structured-light, test our pattern set, and develop and optimize our image reconstruction algorithm. For our phantom studies, we created an agar phantom with dimensions similar to a compressed breast. A cubic inclusion of 30mm by 30mm by 25mm with twice the amount of absorption contrast than the background was placed at the center. Near-infrared light of eleven patterns including a full illumination and single stripes was illuminated onto the breast phantom and detected with a CCD camera, with integration of the signals according to the patterns performed post-data acquisition, with a total of 121 measurements. These measurements were then used in our reconstruction algorithm that iteratively minimized the difference between the collected data and the estimation from our FEM-based forward model of photon diffusion to calculate the absorption values. Reconstructions of the 3D absorption maps detect an inclusion at the center and indicate that our selected set of patterns may be sufficient for structured-light imaging. We are currently improving our instrumentation and testing with additional phantom studies, while also performing simulations of numerical breast phantoms created from MR images to test structured-light's ability to image complex and realistic breast tissue composition. We hope to use this technique as optical method to image molecular markers, such as hemoglobin, water and lipid, within the breast.

  13. Trace Amounts of Furan-2-Carboxylic Acids Determine the Quality of Solid Agar Plates for Bacterial Culture

    PubMed Central

    Hara, Shintaro; Isoda, Reika; Tahvanainen, Teemu; Hashidoko, Yasuyuki

    2012-01-01

    Background Many investigators have recognised that a significant proportion of environmental bacteria exist in a viable but non-culturable state on agar plates, and some researchers have also noticed that some of such bacteria clearly recover their growth on matrices other than agar. However, the reason why agar is unsuitable for the growth of some bacteria has not been addressed. Methodology/Principal Findings According to the guide of a bioassay for swarming inhibition, we identified 5-hydroxymethylfuran-2-carboxylic acid (5-HMFA) and furan-2-carboxylic acid (FA) as factors that inhibit bacterial swarming and likely inhibit extracellular polysaccharide production on agar. The furan-2-carboxylic acids 5-HMFA and FA effectively inhibited the swarming and swimming of several environmental bacteria at concentrations of 1.8 and 2.3 µg L−1 (13 and 21 nmol L−1), respectively, which are equivalent to the concentrations of these compounds in 0.3% agar. On Luria-Bertani (LB) plates containing 1.0% agar that had been previously washed with MeOH, a mixture of 5-HMFA and FA in amounts equivalent to their original concentrations in the unwashed agar repressed the swarming of Escherichia coli K12 strain W3110, a representative swarming bacterium. Conclusions/Significance Agar that contains trace amounts of 5-HMFA and FA inhibits the proliferation of some slow-growing or difficult-to-culture bacteria on the plates, but it is useful for single colony isolation due to the ease of identification of swarmable bacteria as the non-swarmed colonies. PMID:22848437

  14. In vitro/in vivo evaluation of agar nanospheres for pulmonary delivery of bupropion HCl.

    PubMed

    Varshosaz, Jaleh; Minaiyan, Mohsen; Zaki, Mohammad Reza; Fathi, Milad; Jaleh, Hossein

    2016-07-01

    Bupropion HCl is an atypical antidepressant drug with rapid and high first-pass metabolism. Sustained release dosage form of this drug is suggested for reducing its side effects which are mainly seizures. The aim of the present study was to design pulmonary agar nanospheres of bupropion HCl with effective systemic absorption and extended release properties. Bupropion HCl was encapsulated in agar nanospheres by ionic gelation, and characterized for physical and release properties. Pharmacokinetic studies on nanospheres were performed on rats by intratracheal spraying of 5 mg/kg of drug in form of nanospheres compared to intravenous and pulmonary delivery of the same dose as simple solution of the drug. The optimized nanoparticles showed particle size of 320 ± 90 nm with polydispersity index of 0.85, the zeta potential of -29.6 mV, drug loading efficiency of 43.1 ± 0.28% and release efficiency of 66.7 ± 2%. The area under the serum concentration-time profile for the pulmonary nanospheres versus simple solution was 10 237.84 versus 28.8 µg/ml min, Tmax of 360 versus 60 min and the Cmax of 1927.93 versus9.93 ng/ml, respectively. The absolute bioavailability of the drug was 86.69% for nanospheres and 0.25% for pulmonary simple solution. Our results indicate that pulmonary delivery of bupropion loaded agar nanospheres achieves systemic exposure and extends serum levels of the drug. PMID:25835223

  15. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin

    NASA Astrophysics Data System (ADS)

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C.

    2015-03-01

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure—PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery.

  16. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin.

    PubMed

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C

    2015-03-21

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure-PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery. PMID:25716689

  17. [Change of leukocytic phagocytosis during repeat hemoperfusion with cross-linked agar beads entrapped attapulgite clay].

    PubMed

    Huang, Wei; Ma, Yu; Yang, Xiaolan; Tang, Xianjue; Shu, Changda

    2003-06-01

    The leukocytic phagocytosis rate and the index of phagocytosis of rats on cross-linked agar beads entrapped attapulgite clay (CAA) hemoperfusion were studied. The results revealed that the leukocytic phagocytosis rate and the index of phagocytosis descended significantly after 1 hour and rose gradually after 6 hours. Finally it reached the normal level after 48 hours. Hemoperfusion repeated two times gave similar results. In conclusion, the function of leukocytic phagocytosis declined temporarily during CAA hemoperfusion. Many times hemoperfusion will not notably affect the body's defense system of rats. PMID:12856604

  18. Coma in the course of severe poisoning after consumption of red fly agaric (Amanita muscaria).

    PubMed

    Mikaszewska-Sokolewicz, Małgorzata A; Pankowska, Sylwestra; Janiak, Marek; Pruszczyk, Piotr; Łazowski, Tomasz; Jankowski, Krzysztof

    2016-01-01

    Red fly agaric poisoning is rare. It can be consumed for suicidal purposes or its psychedelic effect. The paper describes the case of a young men, who fell into a coma after ingestion of the red toadstools. Quick identification of the poison, early use of gastric lavage and symptomatic treatment resulted in regression of symptoms and lead to the patient's discharge from the hospital on the third day after intoxication. Authors discussing the poisonous alkaloids contained in the red toadtools: ibotenic acid, muscimol, muscasone and muscarine and theirs properties, responsible for the symptoms of intoxication. PMID:26828668

  19. CHROMagar Yersinia, a New Chromogenic Agar for Screening of Potentially Pathogenic Yersinia enterocolitica Isolates in Stools

    PubMed Central

    Renaud, Nicolas; Lecci, Laetitia; Courcol, René J.; Simonet, Michel

    2013-01-01

    CHROMagar Yersinia (CAY) is a new chromogenic medium for the presumptive detection of virulent Yersinia enterocolitica in stools. Based on a comparative analysis of 1,494 consecutive stools from hospitalized patients, CAY was found to be just as sensitive as the reference medium (cefsulodin-irgasan-novobiocin agar) but was significantly more specific and had a very low false-positive rate. CAY reduces the workload (and thus costs) for stool analysis and can therefore be recommended for routine laboratory use. PMID:23363840

  20. Comparative study of 6-APA production by free and agar immobilized bacteria in nutrient broth culture.

    PubMed

    Dolui, A K; Das, S

    2011-04-01

    In the present study different bacterial samples were isolated from soil of different places of Dibrugarh and screened for biotransformation ability to produce 6-Aminopenicillanic acid. Among ten isolated bacterial samples, three gram positive bacterial samples designated as AKDD-2, AKDD-4 and AKDD-6 showed the production of 6-APA from penicillin G. Assessment of production of 6-APA after incubation in penicillin G (2 mg/ml) by three different samples separately in free and agar immobilization state was done by HPLC analysis. Reusability of immobilized cells was found successful up to 14 days. PMID:21614893

  1. Amino acid mediated synthesis of silver nanoparticles and preparation of antimicrobial agar/silver nanoparticles composite films.

    PubMed

    Shankar, Shiv; Rhim, Jong-Whan

    2015-10-01

    Silver nanoparticles (AgNPs) were synthesized using amino acids (tyrosine and tryptophan) as reducing and capping agents, and they were incorporated into the agar to prepare antimicrobial composite films. The AgNPs solutions exhibited characteristic absorption peak at 420 nm that showed a red shift to ∼434 nm after forming composite with agar. XRD data demonstrated the crystalline structure of AgNPs with dominant (111) facet. Apparent surface color and transmittance of agar films were greatly influenced by the AgNPs. The incorporation of AgNPs into agar did not exhibit any change in chemical structure, thermal stability, moisture content, and water vapor permeability. The water contact angle, tensile strength, and modulus decreased slightly, but elongation at break increased after AgNPs incorporation. The agar/AgNPs nanocomposite films possessed strong antibacterial activity against Listeria monocytogenes and Escherichia coli. The agar/AgNPs film could be applied to the active food packaging by controlling the food-borne pathogens. PMID:26076636

  2. Detection by hyperspectral imaging of shiga toxin-producing Escherichia coli serogroups O26, O45, O103, O111, O121, and O145 on rainbow agar.

    PubMed

    Windham, William R; Yoon, Seung-Chul; Ladely, Scott R; Haley, Jennifer A; Heitschmidt, Jerry W; Lawrence, Kurt C; Park, Bosoon; Narrang, Neelam; Cray, William C

    2013-07-01

    The U.S. Department of Agriculture, Food Safety Inspection Service has determined that six non-O157 Shiga toxin-producing Escherichia coli (STEC) serogroups (O26, O45, O103, O111, O121, and O145) are adulterants in raw beef. Isolate and phenotypic discrimination of non-O157 STEC is problematic due to the lack of suitable agar media. The lack of distinct phenotypic color variation among non-O157serogroups cultured on chromogenic agar poses a challenge in selecting colonies for confirmation. In this study, visible and near-infrared hyperspectral imaging and chemometrics were used to detect and classify non-O157 STEC serogroups grown on Rainbow agar O157. The method was first developed by building spectral libraries for each serogroup obtained from ground-truth regions of interest representing the true identity of each pixel and thus each pure culture colony in the hyperspectral agar-plate image. The spectral library for the pure-culture non-O157 STEC consisted of 2,171 colonies, with spectra derived from 124,347 of pixels. The classification models for each serogroup were developed with a k nearest-neighbor classifier. The overall classification training accuracy at the colony level was 99%. The classifier was validated with ground beef enrichments artificially inoculated with 10, 50, and 100 CFU/ml STEC. The validation ground-truth regions of interest of the STEC target colonies consisted of 606 colonies, with 3,030 pixels of spectra. The overall classification accuracy was 98%. The average specificity of the method was 98% due to the low false-positive rate of 1.2%. The sensitivity ranged from 78 to 100% due to the false-negative rates of 22, 7, and 8% for O145, O45, and O26, respectively. This study showed the potential of visible and near-infrared hyperspectral imaging for detecting and classifying colonies of the six non-O157 STEC serogroups. The technique needs to be validated with bacterial cultures directly extracted from meat products and positive

  3. Radiokinetic study on nucleation process of 65Zn(OH)2, 65Zn3(PO4)2 and 51CrPO4 crystals in gelatin and agar

    NASA Astrophysics Data System (ADS)

    Cecal, Al; Palamaru, M.; Chisca, S.; Balan, A.

    1999-01-01

    The nucleation process of 65Zn(OH)2, 65Zn3(PO4)2, and 51CrPO4 crystals in gelatin and agar was studied by using radioactive tracers. The diffusion rate, constants for 65Zn2+ and 51Cr3+ cations through gel, and the reaction rate constants of nucleation process as well as the beginning time of crystal appearance were established. It was found that the reaction rate constant of the low-soluble crystal is higher, and consequently, in a given colloidal medium this parameter varies as follows: k * Zn(PO4)2> k * Zn(OH) 2> k * CrPO 4

  4. Radiokinetic study on nucleation process of 65Zn(OH)2, 65Zn3(PO4)2 and 51CrPO4 crystals in gelatin and agar

    NASA Astrophysics Data System (ADS)

    Cecal, Al; Palamaru, M.; Chisca, S.; Balan, A.

    1999-01-01

    The nucleation process of 65Zn(OH)2, 65Zn3(PO4)2, and 51CrPO4 crystals in gelatin and agar was studied by using radioactive tracers. The diffusion rate, constants for 65Zn2+ and 51Cr3+ cations through gel, and the reaction rate constants of nucleation process as well as the beginning time of crystal appearance were established. It was found that the reaction rate constant of the low-soluble crystal is higher, and consequently, in a given colloidal medium this parameter varies as follows: k * Zn(PO4)2>k * Zn(OH) 2>k * CrPO 4

  5. Effect of post-treatments and concentration of cotton linter cellulose nanocrystals on the properties of agar-based nanocomposite films.

    PubMed

    Oun, Ahmed A; Rhim, Jong-Whan

    2015-12-10

    Cellulose nanocrystals (CNCs) were prepared by acid hydrolysis of cotton linter pulp fibers and three different purification methods, i.e., without post purification (CNC1), dialyzed against distilled water (CNC2), and neutralized with NaOH (CNC3), and their effect on film properties was evaluated by preparation of agar/CNCs composite films. All the CNCs were rod in shape with diameter of 15-50 nm and length of 210-480 nm. FTIR result indicated that there was no distinctive differences in the chemical structure between CNCs and cotton linter cellulose fiber. No significant relationship was observed between the sulfate content and crystallinity index of CNCs. The CNC3 showed higher thermal stability than the other type of CNCs due to the less adverse effect on the thermal stability of sulfate groups induced by the neutralization with NaOH. The tensile strength (TS) of agar film increased by 15% with incorporation of 5 wt% of CNC3, on the contrary, it decreased by 10% and 15% with incorporation of CNC1 and CNC2, respectively. Other performance properties of agar/CNCs composite films such as optical and water vapor barrier properties showed that the CNC3 was more effective filler than the other CNCs. In the range of concentration of CNC3 tested (1-10 wt%), inclusion of 5 wt% of CNC3 was the maximum concentration for improving or maintaining film properties of the composite films. The neutralization of acid hydrolyzed cellulose using NaOH was simple and convenient for the preparation of CNC and bionanocomposite films. PMID:26428095

  6. Comparison of CHROMagar Salmonella Medium and Xylose-Lysine-Desoxycholate and Salmonella-Shigella Agars for Isolation of Salmonella Strains from Stool Samples

    PubMed Central

    Maddocks, Susan; Olma, Tom; Chen, Sharon

    2002-01-01

    The growth and appearance of 115 stock Salmonella isolates on a new formulation of CHROMagar Salmonella (CAS) medium were compared to those on xylose-lysine-desoxycholate agar (XLD), Salmonella-Shigella agar (SS), and Hektoen enteric agar (HEA) media. CAS medium was then compared prospectively to XLD and SS for the detection and presumptive identification of Salmonella strains in 500 consecutive clinical stool samples. All stock Salmonella isolates produced typical mauve colonies on CAS medium. Nine Salmonella strains were isolated from clinical specimens. The sensitivities for the detection of salmonellae after primary plating on CAS medium and the combination of XLD and SS after enrichment were 100%. The specificity for the detection of salmonellae after primary plating on CAS medium (83%) was significantly (P < 0.0001) higher than that after primary plating on the combination of SS and XLD media (55%) (a 28% difference in rates; 95% confidence interval, 23.0 to 34%). Twenty-nine non-Salmonella organisms produced mauve colonies on CAS medium, including 17 Candida spp. (59%) and 8 Pseudomonas spp. (28%). These were easily excluded as salmonellae by colony morphology, microscopic examination of a wet preparation, or oxidase testing. One biochemically inert Escherichia coli isolate required further identification to differentiate it from Salmonella spp. The use of plating on CAS medium demonstrated high levels of sensitivity and specificity and reduced the time to final identification of Salmonella spp., resulting in substantial cost savings. It can be recommended for use for the primary isolation of Salmonella spp. from stool specimens. Other media (e.g., XLD) are required to detect Shigella spp. concurrently. PMID:12149365

  7. Light‐scattering sensor for real‐time identification of Vibrio parahaemolyticus, Vibrio vulnificus and Vibrio cholerae colonies on solid agar plate

    PubMed Central

    Huff, Karleigh; Aroonnual, Amornrat; Littlejohn, Amy E. Fleishman; Rajwa, Bartek; Bae, Euiwon; Banada, Padmapriya P.; Patsekin, Valery; Hirleman, E. Daniel; Robinson, J. Paul; Richards, Gary P.; Bhunia, Arun K.

    2012-01-01

    Summary The three most common pathogenic species of Vibrio, Vibrio cholerae, Vibrio parahaemolyticus and Vibrio vulnificus, are of major concerns due to increased incidence of water‐ and seafood‐related outbreaks and illness worldwide. Current methods are lengthy and require biochemical and molecular confirmation. A novel label‐free forward light‐scattering sensor was developed to detect and identify colonies of these three pathogens in real time in the presence of other vibrios in food or water samples. Vibrio colonies grown on agar plates were illuminated by a 635 nm laser beam and scatter‐image signatures were acquired using a CCD (charge‐coupled device) camera in an automated BARDOT (BActerial Rapid Detection using Optical light‐scattering Technology) system. Although a limited number of Vibrio species was tested, each produced a unique light‐scattering signature that is consistent from colony to colony. Subsequently a pattern recognition system analysing the collected light‐scatter information provided classification in 1−2 min with an accuracy of 99%. The light‐scattering signatures were unaffected by subjecting the bacteria to physiological stressors: osmotic imbalance, acid, heat and recovery from a viable but non‐culturable state. Furthermore, employing a standard sample enrichment in alkaline peptone water for 6 h followed by plating on selective thiosulphate citrate bile salts sucrose agar at 30°C for ∼ 12 h, the light‐scattering sensor successfully detected V. cholerae, V. parahaemolyticus and V. vulnificus present in oyster or water samples in 18 h even in the presence of other vibrios or other bacteria, indicating the suitability of the sensor as a powerful screening tool for pathogens on agar plates. PMID:22613192

  8. Visualization of Biosurfactant Film Flow in a Bacillus subtilis Swarm Colony on an Agar Plate

    PubMed Central

    Kim, Kyunghoon; Kim, Jung Kyung

    2015-01-01

    Collective bacterial dynamics plays a crucial role in colony development. Although many research groups have studied the behavior of fluidic swarm colonies, the detailed mechanics of its motion remains elusive. Here, we developed a visualization method using submicron fluorescent beads for investigating the flow field in a thin layer of fluid that covers a Bacillus subtilis swarm colony growing on an agar plate. The beads were initially embedded in the agar plate and subsequently distributed spontaneously at the upper surface of the expanding colony. We conducted long-term live cell imaging of the B. subtilis colony using the fluorescent tracers, and obtained high-resolution velocity maps of microscale vortices in the swarm colony using particle image velocimetry. A distinct periodic fluctuation in the average speed and vorticity of flow in swarm colony was observed at the inner region of the colony, and correlated with the switch between bacterial swarming and growth phases. At the advancing edge of the colony, both the magnitudes of velocity and vorticity of flow in swarm colony were inversely correlated with the spreading speed of the swarm edge. The advanced imaging tool developed in this study would facilitate further understanding of the effect of micro vortices in swarm colony on the collective dynamics of bacteria. PMID:26343634

  9. Evaluation of a Modified Cefsulodin-Irgasan-Novobiocin Agar for Isolation of Yersinia spp

    PubMed Central

    Tan, Lai Kuan; Ooi, Peck Toung; Carniel, Elisabeth; Thong, Kwai Lin

    2014-01-01

    Y. enterocolitica and Y. pseudotuberculosis are important food borne pathogens. However, the presence of competitive microbiota makes the isolation of Y. enterocolitica and Y. pseudotuberculosis from naturally contaminated foods difficult. We attempted to evaluate the performance of a modified Cefsulodin-Irgasan-Novobiocin (CIN) agar in the differentiation of Y. enterocolitica from non-Yersinia species, particularly the natural intestinal microbiota. The modified CIN enabled the growth of Y. enterocolitica colonies with the same efficiency as CIN and Luria-Bertani agar. The detection limits of the modified CIN for Y. enterocolitica in culture medium (10 cfu/ml) and in artificially contaminated pork (104 cfu/ml) were also comparable to those of CIN. However, the modified CIN provided a better discrimination of Yersinia colonies from other bacteria exhibiting Yersinia-like colonies on CIN (H2S-producing Citrobacter freundii, C. braakii, Enterobacter cloacae, Aeromonas hydrophila, Providencia rettgeri, and Morganella morganii). The modified CIN exhibited a higher recovery rate of Y. enterocolitica from artificially prepared bacterial cultures and naturally contaminated samples compared with CIN. Our results thus demonstrated that the use of modified CIN may be a valuable means to increase the recovery rate of food borne Yersinia from natural samples, which are usually contaminated by multiple types of bacteria. PMID:25170941

  10. Relative value of selective group A streptococcal agar incubated under different atmospheres.

    PubMed Central

    Pacifico, L; Ranucci, A; Ravagnan, G; Chiesa, C

    1995-01-01

    A commercially available selective group A streptococcal agar (ssA) was evaluated for the recovery of group A streptococci (GAS) in comparison with recovery from simultaneous cultures on conventional sheep blood agar (SBA). Both sets of plates were incubated in air, 5% CO2, and anaerobically for 48 h, with a first reading taken at 24 h. A total of 402 (67.0%) GAS were isolated from the 600 specimens that were submitted. Recovery of GAS was significantly greater after 48 h of incubation than after 24 h of incubation for each medium-atmosphere combination. After 48 h of incubation, the sensitivities of GAS detection obtained by each culture technique were as follows: ssA-anaerobic atmosphere, 98.5%; SBA-anaerobic atmosphere, 89.5%; ssA-CO2 atmosphere, 88.0%; SBA-air, 86.5%; SBA-CO2 atmosphere, 82.0%; and ssA-air, 74.6%. There were no cultures positive in air or CO2 which were not positive anaerobically on either medium. The increased sensitivity of detecting positive GAS cultures when incubation was done in an ssA-anaerobic atmosphere for 48 h uncovered patients truly infected with the organisms. PMID:7494053

  11. Visualization of Biosurfactant Film Flow in a Bacillus subtilis Swarm Colony on an Agar Plate.

    PubMed

    Kim, Kyunghoon; Kim, Jung Kyung

    2015-01-01

    Collective bacterial dynamics plays a crucial role in colony development. Although many research groups have studied the behavior of fluidic swarm colonies, the detailed mechanics of its motion remains elusive. Here, we developed a visualization method using submicron fluorescent beads for investigating the flow field in a thin layer of fluid that covers a Bacillus subtilis swarm colony growing on an agar plate. The beads were initially embedded in the agar plate and subsequently distributed spontaneously at the upper surface of the expanding colony. We conducted long-term live cell imaging of the B. subtilis colony using the fluorescent tracers, and obtained high-resolution velocity maps of microscale vortices in the swarm colony using particle image velocimetry. A distinct periodic fluctuation in the average speed and vorticity of flow in swarm colony was observed at the inner region of the colony, and correlated with the switch between bacterial swarming and growth phases. At the advancing edge of the colony, both the magnitudes of velocity and vorticity of flow in swarm colony were inversely correlated with the spreading speed of the swarm edge. The advanced imaging tool developed in this study would facilitate further understanding of the effect of micro vortices in swarm colony on the collective dynamics of bacteria. PMID:26343634

  12. Evaluation of a modified Cefsulodin-Irgasan-Novobiocin agar for isolation of Yersinia spp.

    PubMed

    Tan, Lai Kuan; Ooi, Peck Toung; Carniel, Elisabeth; Thong, Kwai Lin

    2014-01-01

    Y. enterocolitica and Y. pseudotuberculosis are important food borne pathogens. However, the presence of competitive microbiota makes the isolation of Y. enterocolitica and Y. pseudotuberculosis from naturally contaminated foods difficult. We attempted to evaluate the performance of a modified Cefsulodin-Irgasan-Novobiocin (CIN) agar in the differentiation of Y. enterocolitica from non-Yersinia species, particularly the natural intestinal microbiota. The modified CIN enabled the growth of Y. enterocolitica colonies with the same efficiency as CIN and Luria-Bertani agar. The detection limits of the modified CIN for Y. enterocolitica in culture medium (10 cfu/ml) and in artificially contaminated pork (10(4) cfu/ml) were also comparable to those of CIN. However, the modified CIN provided a better discrimination of Yersinia colonies from other bacteria exhibiting Yersinia-like colonies on CIN (H2S-producing Citrobacter freundii, C. braakii, Enterobacter cloacae, Aeromonas hydrophila, Providencia rettgeri, and Morganella morganii). The modified CIN exhibited a higher recovery rate of Y. enterocolitica from artificially prepared bacterial cultures and naturally contaminated samples compared with CIN. Our results thus demonstrated that the use of modified CIN may be a valuable means to increase the recovery rate of food borne Yersinia from natural samples, which are usually contaminated by multiple types of bacteria. PMID:25170941

  13. Inactivation of Listeria monocytogenes on agar and processed meat surfaces by atmospheric pressure plasma jets.

    PubMed

    Lee, Hyun Jung; Jung, Heesoo; Choe, Wonho; Ham, Jun Sang; Lee, Jun Heon; Jo, Cheorun

    2011-12-01

    An apparatus for generating atmospheric pressure plasma (APP) jet was used to investigate the inactivation of Listeria monocytogenes on the surface of agar plates and slices of cooked chicken breast and ham. He, N₂ (both 7 L/min), and mixtures of each with O₂ (0.07 L/min) were used to produce the plasma jets. After treatment for 2 min with APP jets of He, He + O₂, N₂, or N₂ + O₂, the numbers of L. monocytogenes on agar plates were reduced by 0.87, 4.19, 4.26, and 7.59 log units, respectively. Similar treatments reduced the L. monocytogenes inoculated onto sliced chicken breast and ham by 1.37 to 4.73 and 1.94 to 6.52 log units, respectively, according to the input gas used with the N₂ + O₂ mixture being the most effective. Most APP jets reduced the numbers of aerobic bacteria on the meat surfaces to <10² CFU/g, and the numbers remained below that level of detection after storage at 10 °C for 7 days. The results indicate that APP jets are effective for the inactivation of L. monocytogenes on sliced meats and for prolonging the shelf-life of such foods. PMID:21925030

  14. Abolition of Swarming of Proteus by p-Nitrophenyl Glycerin: Application to Blood Agar Media

    PubMed Central

    Williams, Fred D.

    1973-01-01

    Comparative plate counts were made of Staphylococcus aureus and Streptococcus pyogenes growing on blood agar supplemented with individual chemicals to abolish the swarming of Proteus. B-phenylethanol, sodium azide, and p-nitrophenyl glycerin (PNPG) were used as anti-swarm agents. Each anti-swarm agent effectively abolished swarming for 24 h, but azide failed to control swarming for longer periods of incubation. In addition, azide displayed growth inhibition towards the staphylococci and streptococci resulting in no hemolysis and reduced viable cell numbers with the streptococci. Phenylethanol showed reduced viable cell numbers with the streptococci and unreliable hemolytic reactions. At 0.1 to 0.3 mM, PNPG proved to be a superior anti-swarm agent in that it showed no growth inhibition and allowed normal hemolysis, but abolished swarming for extended periods of time. When laboratory strains of Streptococcus pneumoniae, Klebsiella pneumoniae, Pseudomonas aeruginosa. Listeria monocytogenes, and Vibrio cholerae were screened on a blood agar medium containing 0.1 mm PNPG, they displayed similar growth and hemolytic characteristics to the identical medium without PNPG. PMID:4715553

  15. Colonic cell growth and mucin degradation in rats fed diets containing various levels of beta-carotene with and without dietary agar.

    PubMed

    Hwa, S H; Shiau, S Y

    1993-06-01

    1. To either an agar-containing diet or an agar-free diet, 0, 0.3 and 2.0 mg/100 g of beta-carotene were incorporated and fed to groups of five rats for 28 days. 2. Weight gain and food consumption of rats fed different dietary groups did not show a significant difference (P > 0.05). 3. Colon weight, colonic mucosal DNA and RNA were generally higher in rats fed agar diets than rats fed agar-free diets at either beta-carotene supplementation level. 4. Mucinase activity was higher (P < 0.05) in rats fed the agar diet than in rats fed an agar-free diet without beta-carotene. However, the difference was not observed (P > 0.05) when beta-carotene was incorporated. 5. These data suggest that colonic mucin degradation in rats fed an agar diet decreased when the dietary beta-carotene inclusion level increased. PMID:7687211

  16. Two-day hydrophobic grid membrane filter method for yeast and mold enumeration in foods using YM-11 agar: collaborative study.

    PubMed

    Entis, P

    1996-01-01

    Twenty laboratories participated in a collaborative study to validate a 2-day hydrophobic grid membrane filter method using YM-11 agar for enumeration of yeast and mold in foods. Six naturally contaminated food products were included in the study: garlic powder, raw ground beef, walnuts, flour/meal, orange juice, and yogurt. The test method produced significantly higher results than the 5-day pour plate reference method for orange juice and significantly lower, though numerically similar, results for walnuts and yogurt. Differences between the test and reference methods were not significant for garlic powder, raw ground beef, or flour/meal. Repeatability and reproducibility were similar for both the test and reference methods in all cases. The hydrophobic grid membrane filter method for enumeration of yeast and mold in foods has been adopted by AOAC INTERNATIONAL. PMID:8823916

  17. Vaneless diffusers

    NASA Astrophysics Data System (ADS)

    Senoo, Y.

    The influence of vaneless diffusers on flow in centrifugal compressors, particularly on surge, is discussed. A vaneless diffuser can demonstrate stable operation in a wide flow range only if it is installed with a backward leaning blade impeller. The circumferential distortion of flow in the impeller disappears quickly in the vaneless diffuser. The axial distortion of flow at the diffuser inlet does not decay easily. In large specific speed compressors, flow out of the impeller is distorted axially. Pressure recovery of diffusers at distorted inlet flow is considerably improved by half guide vanes. The best height of the vanes is a little 1/2 diffuser width. In small specific speed compressors, flow out of the impeller is not much distorted and pressure recovery can be predicted with one-dimensional flow analysis. Wall friction loss is significant in narrow diffusers. The large pressure drop at a small flow rate can cause the positive gradient of the pressure-flow rate characteristic curve, which may cause surging.

  18. Computational Analyses in Support of Sub-scale Diffuser Testing for the A-3 Facility. Part 3; Aero-Acoustic Analyses and Experimental Validation

    NASA Technical Reports Server (NTRS)

    Allgood, Daniel C.; Graham, Jason S.; McVay, Greg P.; Langford, Lester L.

    2008-01-01

    A unique assessment of acoustic similarity scaling laws and acoustic analogy methodologies in predicting the far-field acoustic signature from a sub-scale altitude rocket test facility at the NASA Stennis Space Center was performed. A directional, point-source similarity analysis was implemented for predicting the acoustic far-field. In this approach, experimental acoustic data obtained from "similar" rocket engine tests were appropriately scaled using key geometric and dynamic parameters. The accuracy of this engineering-level method is discussed by comparing the predictions with acoustic far-field measurements obtained. In addition, a CFD solver was coupled with a Lilley's acoustic analogy formulation to determine the improvement of using a physics-based methodology over an experimental correlation approach. In the current work, steady-state Reynolds-averaged Navier-Stokes calculations were used to model the internal flow of the rocket engine and altitude diffuser. These internal flow simulations provided the necessary realistic input conditions for external plume simulations. The CFD plume simulations were then used to provide the spatial turbulent noise source distributions in the acoustic analogy calculations. Preliminary findings of these studies will be discussed.

  19. A Diffusion Approach to Study Leadership Reform

    ERIC Educational Resources Information Center

    Adams, Curt M.; Jean-Marie, Gaetane

    2011-01-01

    Purpose: This study aims to draw on elements of diffusion theory to understand leadership reform. Many diffusion studies examine the spread of an innovation across social units but the objective is to examine diffusion of a collective leadership model within school units. Specifically, the strength of reform diffusion is tested to account for…

  20. Isolation, Identification, and In Vitro Antifungal Susceptibility Testing of Dermatophytes from Clinical Samples at Sohag University Hospital in Egypt

    PubMed Central

    Shalaby, Mona Fattouh Mohamed; El-din, Asmaa Nasr; El-Hamd, Mohammed Abu

    2016-01-01

    Aim The objective of this study was to isolate, identify, and explore the in-vitro antifungal susceptibility pattern of dermatophytes isolated from clinically suspected cases of dermatophytosis (tinea infections) attending the Dermatology Outpatient Clinic. Methods This study was conducted at Sohag University Hospital from December 2014 to December 2015. Clinical samples (e.g., skin scrapings and hair stumps) were collected under aseptic precautions. The identification of dermatophytes was performed through microscopic examination using 10% potassium hydroxide (KOH) with 40% dimethyl sulphoxide (DMSO) mounts and culture on Sabouraud dextrose agar (SDA) and on Dermasel agar base media, both supplemented with chloramphenicol and cycloheximide. All dermatophytes isolates were subjected to antifungal susceptibility testing using the agar-based disk diffusion (ABDD) method against Clotrimazole, Miconazole, Fluconazole, and Griseofulvin. Data were analyzed via SPSS 16, using Chi square and a screening test (cross-tabulation method). Results A total of 110 patients of dermatophytosis were studied. The patients were clinically diagnosed and mycologically confirmed as having tinea capitis (49), tinea corporis (30), tinea pedis (16), tinea cruris (9), or tinea barbae (6). The dermatophytes isolates belonged to 4 species: Microsporum canis 58 (52.7%), Microsporum gypseum 23 (20.9%), Trichophyton mentagrophytes 18 (16.4%), and Microsporum audouinii 11 (10%). The most effective antifungal drugs tested were Clotrimazole, followed by Miconazole (95.5% and 84.5% of isolates were susceptible, respectively). Conclusion Every patient with a tinea infection should be properly studied for a mycological examination and should be treated accordingly. Dermasel agar is more useful as an identification medium in the isolation of dermatophytes. The ABDD method appears to be a simple, cost-effective, and promising method for the evaluation of antifungal susceptibility of dermatophytes. PMID

  1. Diffusion barriers

    NASA Technical Reports Server (NTRS)

    Nicolet, M. A.

    1983-01-01

    The choice of the metallic film for the contact to a semiconductor device is discussed. One way to try to stabilize a contact is by interposing a thin film of a material that has low diffusivity for the atoms in question. This thin film application is known as a diffusion barrier. Three types of barriers can be distinguished. The stuffed barrier derives its low atomic diffusivity to impurities that concentrate along the extended defects of a polycrystalline layer. Sacrificial barriers exploit the fact that some (elemental) thin films react in a laterally uniform and reproducible fashion. Sacrificial barriers have the advantage that the point of their failure is predictable. Passive barriers are those most closely approximating an ideal barrier. The most-studied case is that of sputtered TiN films. Stuffed barriers may be viewed as passive barriers whose low diffusivity material extends along the defects of the polycrystalline host.

  2. Diffuse radiation

    NASA Technical Reports Server (NTRS)

    1981-01-01

    A diffuse celestial radiation which is isotropic at least on a course scale were measured from the soft X-ray region to about 150 MeV, at which energy the intensity falls below that of the galactic emission for most galactic latitudes. The spectral shape, the intensity, and the established degree of isotropy of this diffuse radiation already place severe constraints on the possible explanations for this radiation. Among the extragalactic theories, the more promising explanations of the isotropic diffuse emission appear to be radiation from exceptional galaxies from matter antimatter annihilation at the boundaries of superclusters of galaxies of matter and antimatter in baryon symmetric big bang models. Other possible sources for extragalactic diffuse gamma radiation are discussed and include normal galaxies, clusters of galaxies, primordial cosmic rays interacting with intergalactic matter, primordial black holes, and cosmic ray leakage from galaxies.

  3. Investigating diffusion with technology

    NASA Astrophysics Data System (ADS)

    Miller, Jon S.; Windelborn, Augden F.

    2013-07-01

    The activities described here allow students to explore the concept of diffusion with the use of common equipment such as computers, webcams and analysis software. The procedure includes taking a series of digital pictures of a container of water with a webcam as a dye slowly diffuses. At known time points, measurements of the pixel densities (darkness) of the digital pictures are recorded and then plotted on a graph. The resulting graph of darkness versus time allows students to see the results of diffusion of the dye over time. Through modification of the basic lesson plan, students are able to investigate the influence of a variety of variables on diffusion. Furthermore, students are able to expand the boundaries of their thinking by formulating hypotheses and testing their hypotheses through experimentation. As a result, students acquire a relevant science experience through taking measurements, organizing data into tables, analysing data and drawing conclusions.

  4. Ultra-sensitive detection of tumorigenic cellular impurities in human cell-processed therapeutic products by digital analysis of soft agar colony formation.

    PubMed

    Kusakawa, Shinji; Yasuda, Satoshi; Kuroda, Takuya; Kawamata, Shin; Sato, Yoji

    2015-01-01

    Contamination with tumorigenic cellular impurities is one of the most pressing concerns for human cell-processed therapeutic products (hCTPs). The soft agar colony formation (SACF) assay, which is a well-known in vitro assay for the detection of malignant transformed cells, is applicable for the quality assessment of hCTPs. Here we established an image-based screening system for the SACF assay using a high-content cell analyzer termed the digital SACF assay. Dual fluorescence staining of formed colonies and the dissolution of soft agar led to accurate detection of transformed cells with the imaging cytometer. Partitioning a cell sample into multiple wells of culture plates enabled digital readout of the presence of colonies and elevated the sensitivity for their detection. In practice, the digital SACF assay detected impurity levels as low as 0.00001% of the hCTPs, i.e. only one HeLa cell contained in 10,000,000 human mesenchymal stem cells, within 30 days. The digital SACF assay saves time, is more sensitive than in vivo tumorigenicity tests, and would be useful for the quality control of hCTPs in the manufacturing process. PMID:26644244

  5. First Report of Crown Gall Caused by Agrobacterium sp. on Diffuse Knapweed (Centaurea diffusa)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A specimen of diffuse knapweed (Centaurea diffusa, DK) with crown gall-like symptoms was collected July 27, 2004, in Mosier, Wasco Co., OR (N 45.6842, W 121.4021), and sent to the USDA at Ft. Detrick, MD, for identification. A bacterium was isolated on Potato Dextrose Agar that caused hyperplasia a...

  6. The effects of nutrient chemotaxis on bacterial aggregation patterns with non-linear degenerate cross diffusion

    NASA Astrophysics Data System (ADS)

    Leyva, J. Francisco; Málaga, Carlos; Plaza, Ramón G.

    2013-11-01

    This paper studies a reaction-diffusion-chemotaxis model for bacterial aggregation patterns on the surface of thin agar plates. It is based on the non-linear degenerate cross diffusion model proposed by Kawasaki et al. (1997) [5] and it includes a suitable nutrient chemotactic term compatible with such type of diffusion, as suggested by Ben-Jacob et al. (2000) [20]. An asymptotic estimation predicts the growth velocity of the colony envelope as a function of both the nutrient concentration and the chemotactic sensitivity. It is shown that the growth velocity is an increasing function of the chemotactic sensitivity. High resolution numerical simulations using Graphic Processing Units (GPUs), which include noise in the diffusion coefficient for the bacteria, are presented. The numerical results verify that the chemotactic term enhances the velocity of propagation of the colony envelope. In addition, the chemotaxis seems to stabilize the formation of branches in the soft-agar, low-nutrient regime.

  7. Characteristics of rat megakaryocyte colonies and their progenitors in agar culture

    SciTech Connect

    Kellar, K.L.; Rolovic, Z.; Evatt, B.L.; Sewell, E.T.

    1985-11-01

    The characteristics of megakaryocyte colonies that develop from megakaryocyte progenitors of rat bone marrow stimulated by rat spleen-conditioned medium (SCM) in agar culture were investigated. Colony frequency was optimal on day 7 and increased relative to both the number of cells plated and the concentration of SCM used. Colonies were categorized as small cell and big cell. Small-cell colonies had a greater proliferative potential, with a mean of 25 cells/colony. Big-cell colonies averaged 15 cells/colony. The ratio of big-cell to small-cell colonies was 0.69 +/- 0.29. Granulocyte-macrophage colonies, which were also stimulated by SCM, accounted for 70% +/- 15% of the total colonies in the cultures. Cytocidal experiments with tritiated thymidine reduced megakaryocyte colony formation by 45% and granulocyte-macrophage colony formation by 21%. The properties of rat, mouse, and human megakaryocyte progenitors as assayed in vitro are compared.

  8. Nocardia pigrifrangens sp. nov., a novel actinomycete isolated from a contaminated agar plate.

    PubMed

    Wang, Liming; Zhang, Yamei; Huang, Ying; Maldonado, Luis A; Liu, Zhiheng; Goodfellow, Michael

    2004-09-01

    A polyphasic study was undertaken to establish the taxonomic position of an actinomycete strain isolated from a contaminated agar plate. The strain, designated 7031T, had morphological and chemotaxonomic properties typical of the genus Nocardia. An almost-complete 16S rRNA gene sequence determined for the strain was aligned with available sequences for nocardiae, and phylogenetic trees were inferred using three tree-generating algorithms. Strain 7031T clustered with the type strains of Nocardia carnea and Nocardia flavorosea, showing low 16S rRNA gene sequence similarities to these species (97.2 and 97.5 %, respectively). The strain was also distinguished from the closest species by a range of phenotypic properties. It is proposed that the strain be recognized as a novel species of Nocardia, Nocardia pigrifrangens sp. nov., the type strain of which is 7031T (= AS 4.1808T = JCM 11884T). PMID:15388728

  9. Injection of Acanthaster planci with thiosulfate-citrate-bile-sucrose agar (TCBS). I. Disease induction.

    PubMed

    Rivera-Posada, J A; Pratchett, M; Cano-Gómez, A; Arango-Gómez, J D; Owens, L

    2011-12-01

    This is the first report of the successful induction of a transmissible disease in the coral-eating crown-of-thorns starfish Acanthaster planci (COTS). Injection of thiosulfate-citrate-bile-sucrose agar (TCBS) culture medium into COTS induced a disease characterized by discoloured and necrotic skin, ulcerations, loss of body turgor, accumulation of colourless mucus on many spines especially at their tip, and loss of spines. Blisters on the dorsal integument broke through the skin surface and resulted in large, open sores that exposed the internal organs. Oedema and reddened digestive tissues and destruction of connective fibers were common. Moreover, healthy COTS in contact with these infected animals also displayed signs of disease and died within 24 h. TCBS induced 100% mortality in injected starfish. There was no introduction of new pathogens into the marine environment. TCBS promoted the growth of COTS' naturally occurring Vibrionales to high densities with subsequent symbiont imbalance followed by disease and death. PMID:22303625

  10. [Cryofractographic study of intercellular junctions in the populations of agar-cultivated Bordetella pertussis].

    PubMed

    Vysotskiĭ, V V; Vaisman, I Sh; Efimova, O G; Chemurzieva, N V

    1985-09-01

    The characteristic feature of replicas obtained from the freeze-fractures of B. pertussis unfixed cultures developing on casein charcoal agar for 1-7 days is the associative growth of highly polymorphic cells, ensured by the ramified system of intercellular connections (IC) formed by the derivatives of the outer layers of the cell wall. This proves that the associative location of bacterial cells, linked by numerous IC, in the preparation is not the artefact appearing in the process of their chemical fixation. In replicas obtained from the freeze-fractures of B. pertussis cultures, previously fixed with glutaraldehyde, osmic acid and uranyl acetate, oval cells with the cytoplasm having a relatively homogeneous structure and with the smoothed-out three-layer cell wall prevail. As a rule, IC are limited to the sites of direct contacts between individual cells. PMID:2866645

  11. Growth of Bacillus cereus on solid media as affected by agar, sodium chloride, and potassium sorbate.

    PubMed

    Stecchini, M L; Del Torre, M; Donda, S; Maltini, E

    2000-07-01

    The effect of two independent variables: microstructure, as modified by the agar content (1.0, 4.0, 7.0%), and water activity (a(w)), as modified by the NaCl content (0.5, 2.5, 4.5%), in the absence or in the presence of potassium sorbate (0.0; 2,000 ppm) on Bacillus cereus growth on solid media was studied. The time to visible growth (TVG) and the radial growth rate (RGR) of colonies were evaluated. TVG was not affected by microstructure and K-sorbate, although when a(w) was reduced, TVG tended to increase. RGR depended on linear effects of microstructure and a(w) variables and their interaction. When K-sorbate was added to cultural media, RGR was reduced significantly. However, in the presence of K-sorbate, RGR was found to change only when a(w) vas varied. PMID:10914662

  12. Nutrient Requirements of Renibacterium salmoninarum on Agar and in Broth Media.

    PubMed

    Daly, J G; Stevenson, R M

    1993-07-01

    In well-aerated broth cultures, good growth of Renibacterium salmoninarum was obtained in a serum-free medium consisting of 1% peptone, 1% yeast extract, and 0.1% l-cysteine (PYC broth). In contrast, serum or charcoal is required for growth on agar medium. Charcoal treatment of broth media, either before bacterial inoculation or during growth, increased the growth of R. salmoninarum, whereas the surfactants Tween 20 and Tween 80 inhibited growth. l-Cysteine was essential for optimal growth. Other organic sulfur compounds, such as d-cysteine, l-methionine, homocysteine, homocysteine thiolactone, and reduced glutathione, supported only lower levels of growth, while cystine and dithiothreitol did not allow growth. PMID:16348993

  13. Nutrient Requirements of Renibacterium salmoninarum on Agar and in Broth Media

    PubMed Central

    Daly, J. G.; Stevenson, R. M. W.

    1993-01-01

    In well-aerated broth cultures, good growth of Renibacterium salmoninarum was obtained in a serum-free medium consisting of 1% peptone, 1% yeast extract, and 0.1% l-cysteine (PYC broth). In contrast, serum or charcoal is required for growth on agar medium. Charcoal treatment of broth media, either before bacterial inoculation or during growth, increased the growth of R. salmoninarum, whereas the surfactants Tween 20 and Tween 80 inhibited growth. l-Cysteine was essential for optimal growth. Other organic sulfur compounds, such as d-cysteine, l-methionine, homocysteine, homocysteine thiolactone, and reduced glutathione, supported only lower levels of growth, while cystine and dithiothreitol did not allow growth. PMID:16348993

  14. Charcoal agar, a new growth medium for the fish disease bacterium Renibacterium salmoninarum.

    PubMed Central

    Daly, J G; Stevenson, R M

    1985-01-01

    Charcoal is an effective replacement for serum in media for the isolation and culture of Renibacterium salmoninarum, the causative agent of bacterial kidney disease in salmonid fish. The medium, KDM-C, contains 10 g of peptone, 0.5 g of yeast extract, 1 g of L-cysteine hydrochloride, 1 g of activated charcoal, and 15 g of agar per liter and is adjusted to pH 6.8 with NaOH before autoclaving. Eight strains of R. salmoninarum grew from dilute inocula as well on KDM-C as on a standard serum-containing medium (KDM-2). The medium was effective for both primary isolations from fish and repeated transfers and has potential value for antigen preparation and physiological studies. Images PMID:4083882

  15. Accumulation of dibenzocyclooctadiene lignans in agar cultures and in stationary and agitated liquid cultures of Schisandra chinensis (Turcz.) Baill.

    PubMed

    Szopa, Agnieszka; Kokotkiewicz, Adam; Marzec-Wróblewska, Urszula; Bucinski, Adam; Luczkiewicz, Maria; Ekiert, Halina

    2016-05-01

    Schisandra chinensis plant in vitro cultures were maintained on Murashige and Skoog (MS) medium supplemented with 3 mg/l 6-benzyladenine (BA) and 1 mg/l 1-naphthaleneacetic acid (NAA) in an agar system and also in two different liquid systems: stationary and agitated. Liquid cultures were grown in batch (30 and 60 days) and fed-batch modes. In the methanolic extracts from lyophilized biomasses and in the media, quantification of fourteen dibenzocyclooctadiene lignans identified based on co-chromatography with authentic standards using high-performance liquid chromatography with diode array detection (HPLC-DAD) and/or liquid chromatography with diode array detection and electrospray ionization mass spectrometry (LC-DAD-ESI-MS) methods. For comparison purposes, phytochemical analyses were performed of lignans in the leaves and fruits of the parent plant. The main lignans detected in the biomass extracts from all the tested systems were schisandrin (max. 65.62 mg/100 g dry weight (DW)), angeloyl-/tigloylgomisin Q (max. 49.73 mg/100 g DW), deoxyschisandrin (max. 43.65 mg/100 g DW), and gomisin A (max. 34.36 mg/100 g DW). The highest total amounts of lignans in the two tested stationary systems were found in extracts from the biomass harvested after 30 days of batch cultivation: 237.86 mg/100 g DW and 274.65 mg/100 g DW, respectively. In the agitated culture, the total content reached a maximum value of 244.80 mg/100 g DW after 60 days of the fed-batch mode of cultivation. The lignans were not detected in the media. This is the first report which documents the potential usefulness of S. chinensis shoot cultures cultivated in liquid systems for practical purposes. PMID:26685855

  16. Evolutionary consequences of putative intra-and interspecific hybridization in agaric fungi.

    PubMed

    Hughes, Karen W; Petersen, Ronald H; Lodge, D Jean; Bergemann, Sarah E; Baumgartner, Kendra; Tulloss, Rodham E; Lickey, Edgar; Cifuentes, Joaquin

    2013-01-01

    Agaric fungi of the southern Appalachian Mountains including Great Smoky Mountains National Park are often heterozygous for the rDNA internal transcribed spacer region (ITS) with >42% of collections showing some heterozygosity for indels and/or base-pair substitutions. For these collections, intra-individual haplotype divergence is typically less than 2%, but for 3% of these collections intra-individual haplotype divergence exceeds that figure. We hypothesize that high intra-individual haplotype divergence is due to hybridization between agaric fungi with divergent haplotypes, possibly migrants from geographically isolated glacial refugia. Four species with relatively high haplotype divergence were examined: Armillaria mellea, Amanita citrina f. lavendula, Gymnopus dichrous and the Hygrocybe flavescens/chlorophana complex. The ITS region was sequenced, haplotypes of heterozygotes were resolved through cloning, and phylogenetic analyses were used to determine the outcome of hybridization events. Within Armillaria mellea and Amanita citrina f. lavendula, we found evidence of interbreeding and recombination. Within G. dichrous and H. flavescens/chlorophana, hybrids were identified but there was no evidence for F2 or higher progeny in natural populations suggesting that the hybrid fruitbodies might be an evolutionary dead end and that the genetically divergent Mendelian populations from which they were derived are, in fact, different species. The association between ITS haplotype divergence of less than 5% (Armillaria mellea = 2.6% excluding gaps; Amanita citrina f. lavendula = 3.3%) with the presence of putative recombinants and greater than 5% (Gymnopus dichrous = 5.7%; Hygrocybe flavescens/chlorophana = 14.1%) with apparent failure of F1 hybrids to produce F2 or higher progeny in populations may suggest a correlation between genetic distance and reproductive isolation. PMID:23928423

  17. Feasibility study for the development of certified reference materials for specific migration testing. Part 2: estimation of diffusion parameters and comparison of experimental and predicted data.

    PubMed

    Stoffers, N H; Brandsch, R; Bradley, E L; Cooper, I; Dekker, M; Störmer, A; Franz, R

    2005-02-01

    This paper describes the second part of a project whose main objective was to develop the know-how to produce certified reference materials (CRMs) for specific migration testing. Certification parameters discussed are the diffusion coefficient, D(P), the respective polymer-specific coefficient, A(P), of the migrant polymer combinations and the partitioning coefficient, K(P,F), describing the partitioning of the migrant between the polymer and a food simulant. The parameters were determined for 16 preliminary candidate CRMs. Each parameter was determined by one laboratory. The six materials most suitable as reference materials were selected and the parameters then determined by four laboratories. The coefficients resulting from this small-scale interlaboratory comparison study can be regarded as the most reliable values available to date. These coefficients were applied for a comparison of experimental and predicted migration data. The experimental migration data arose from the same project and were determined by one laboratory for the first 16 materials and subsequently by four laboratories for the six materials selected in the second phase. Overall, experimental and predicted migration data fit together quite well. Roughly half of the predicted data were within +/-10%; almost all predicted data were within +/-40% compared with the experimental data. PMID:15864868

  18. Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter

    NASA Technical Reports Server (NTRS)

    Gokoglu, S. A.; Santoro, G. J.

    1985-01-01

    Two sets of experiments have been performed to be able to predict the convective diffusion heat/mass transfer rates to a cylindrical target whose height and diameter are comparable to, but less than, the diameter of the circular cross-stream jet, thereby simulating the same geometric configuration as a typical burner rig test specimen located in the cross-stream of the combustor exit nozzle. The first set exploits the naphthalene sublimation technique to determine the heat/mass transfer coefficient under isothermal conditions for various flow rates (Reynolds numbers). The second set, conducted at various combustion temperatures and Reynolds numbers, utilized the temperature variation along the surface of the above-mentioned target under steady-state conditions to estimate the effect of cooling (dilution) due to the entrainment of stagnant room temperature air. The experimental information obtained is used to predict high temperature, high velocity corrosive salt vapor deposition rates in burner rigs on collectors that are geometrically the same. The agreement with preliminary data obtained from Na2SO4 vapor deposition experiments is found to be excellent.

  19. Recommendation of an Appropriate Medium for In Vitro Drug Susceptibility Testing of the Fish Pathogen Tenacibaculum maritimum

    PubMed Central

    Avendaño-Herrera, Ruben; Irgang, Rute; Núñez, Soledad; Romalde, Jesús L.; Toranzo, Alicia E.

    2005-01-01

    In the present study, Anacker and Ordal agar, marine agar (MA), and Flexibacter maritimus medium (FMM) were compared with the dilute versions of Mueller-Hinton agar (DMHA) medium recommended by the National Committee for Clinical Laboratory Standards (NCCLS) for their use in disk diffusion tests with Tenacibaculum maritimum strains and to calculate the MICs of five drugs by the Etest method. Preliminary growth tests performed with 32 strains of this pathogen on each medium revealed that all strains failed to grow on DMHA, while the remaining media supported good growth of all isolates. In the susceptibility tests, which were carried out with the other three media, all strains were resistant to oxolinic acid and were highly susceptible to amoxicillin and trimethoprim-sulfamethoxazole, showing a good correspondence with the Etest values, which ranged from 0.064 to 0.75 and 0.006 to 1.5 μg/ml, respectively. Enrofloxacin and oxytetracycline produced significantly smaller inhibition zones and MICs on MA than on the other media assayed. However, fast, clear, and well-defined zones of inhibition were displayed for all strains at 24 h of incubation only on FMM by both the disk diffusion assay and Etest. In addition, FMM prepared with commercial sea salts instead of seawater was also suitable for bacterial isolation as well as for susceptibility testing. On the basis of these results, the use of FMM to determine the in vitro susceptibility of T. maritimum and its inclusion in a future revision of the NCCLS M42 report are recommended. PMID:15616279

  20. Recommendation of an appropriate medium for in vitro drug susceptibility testing of the fish pathogen Tenacibaculum maritimum.

    PubMed

    Avendaño-Herrera, Ruben; Irgang, Rute; Núñez, Soledad; Romalde, Jesús L; Toranzo, Alicia E

    2005-01-01

    In the present study, Anacker and Ordal agar, marine agar (MA), and Flexibacter maritimus medium (FMM) were compared with the dilute versions of Mueller-Hinton agar (DMHA) medium recommended by the National Committee for Clinical Laboratory Standards (NCCLS) for their use in disk diffusion tests with Tenacibaculum maritimum strains and to calculate the MICs of five drugs by the Etest method. Preliminary growth tests performed with 32 strains of this pathogen on each medium revealed that all strains failed to grow on DMHA, while the remaining media supported good growth of all isolates. In the susceptibility tests, which were carried out with the other three media, all strains were resistant to oxolinic acid and were highly susceptible to amoxicillin and trimethoprim-sulfamethoxazole, showing a good correspondence with the Etest values, which ranged from 0.064 to 0.75 and 0.006 to 1.5 mug/ml, respectively. Enrofloxacin and oxytetracycline produced significantly smaller inhibition zones and MICs on MA than on the other media assayed. However, fast, clear, and well-defined zones of inhibition were displayed for all strains at 24 h of incubation only on FMM by both the disk diffusion assay and Etest. In addition, FMM prepared with commercial sea salts instead of seawater was also suitable for bacterial isolation as well as for susceptibility testing. On the basis of these results, the use of FMM to determine the in vitro susceptibility of T. maritimum and its inclusion in a future revision of the NCCLS M42 report are recommended. PMID:15616279

  1. Variation in the excitability of developed D. discoideum cells as a function of agar concentration in the substrate

    NASA Astrophysics Data System (ADS)

    Oikawa, Noriko; Bae, Albert; Amselem, Gabriel; Bodenschatz, Eberhard

    2010-03-01

    In the absence of nutrients, Dictyostelium discoideum cells enter a developmental cycle--they signal each other, aggregate, and ultimately form fruiting bodies. During the signaling stage, the cells relay waves of cyclic adenosine 3',5' monophosphate (cAMP). We observed a transition from spiral to circular patterns in the signaling wave, depending on the agar concentration of the substrate. In this talk we will present the changes in the times for the onset of signaling and synchronization versus agar concentration, as measured by spectral entropy. We also will discuss the origin of these effects.

  2. Water vapor diffusion membranes

    NASA Technical Reports Server (NTRS)

    Holland, F. F., Jr.; Smith, J. K.

    1974-01-01

    The program is reported, which was designed to define the membrane technology of the vapor diffusion water recovery process and to test this technology using commercially available or experimental membranes. One membrane was selected, on the basis of the defined technology, and was subjected to a 30-day demonstration trial.

  3. Defusing Diffusion

    ERIC Educational Resources Information Center

    Dou, Remy; Hogan, DaNel; Kossover, Mark; Spuck, Timothy; Young, Sarah

    2013-01-01

    Diffusion has often been taught in science courses as one of the primary ways by which molecules travel, particularly within organisms. For years, classroom teachers have used the same common demonstrations to illustrate this concept (e.g., placing drops of food coloring in a beaker of water). Most of the time, the main contributor to the motion…

  4. Relativistic diffusion

    NASA Astrophysics Data System (ADS)

    Haba, Z.

    2009-02-01

    We discuss relativistic diffusion in proper time in the approach of Schay (Ph.D. thesis, Princeton University, Princeton, NJ, 1961) and Dudley [Ark. Mat. 6, 241 (1965)]. We derive (Langevin) stochastic differential equations in various coordinates. We show that in some coordinates the stochastic differential equations become linear. We obtain momentum probability distribution in an explicit form. We discuss a relativistic particle diffusing in an external electromagnetic field. We solve the Langevin equations in the case of parallel electric and magnetic fields. We derive a kinetic equation for the evolution of the probability distribution. We discuss drag terms leading to an equilibrium distribution. The relativistic analog of the Ornstein-Uhlenbeck process is not unique. We show that if the drag comes from a diffusion approximation to the master equation then its form is strongly restricted. The drag leading to the Tsallis equilibrium distribution satisfies this restriction whereas the one of the Jüttner distribution does not. We show that any function of the relativistic energy can be the equilibrium distribution for a particle in a static electric field. A preliminary study of the time evolution with friction is presented. It is shown that the problem is equivalent to quantum mechanics of a particle moving on a hyperboloid with a potential determined by the drag. A relation to diffusions appearing in heavy ion collisions is briefly discussed.

  5. Relativistic diffusion.

    PubMed

    Haba, Z

    2009-02-01

    We discuss relativistic diffusion in proper time in the approach of Schay (Ph.D. thesis, Princeton University, Princeton, NJ, 1961) and Dudley [Ark. Mat. 6, 241 (1965)]. We derive (Langevin) stochastic differential equations in various coordinates. We show that in some coordinates the stochastic differential equations become linear. We obtain momentum probability distribution in an explicit form. We discuss a relativistic particle diffusing in an external electromagnetic field. We solve the Langevin equations in the case of parallel electric and magnetic fields. We derive a kinetic equation for the evolution of the probability distribution. We discuss drag terms leading to an equilibrium distribution. The relativistic analog of the Ornstein-Uhlenbeck process is not unique. We show that if the drag comes from a diffusion approximation to the master equation then its form is strongly restricted. The drag leading to the Tsallis equilibrium distribution satisfies this restriction whereas the one of the Jüttner distribution does not. We show that any function of the relativistic energy can be the equilibrium distribution for a particle in a static electric field. A preliminary study of the time evolution with friction is presented. It is shown that the problem is equivalent to quantum mechanics of a particle moving on a hyperboloid with a potential determined by the drag. A relation to diffusions appearing in heavy ion collisions is briefly discussed. PMID:19391727

  6. Development of a colony lift immunoassay to facilitate rapid detection and quantification of Escherichia coli O157:H7 from agar plates and filter monitor membranes.

    PubMed

    Ingram, D T; Lamichhane, C M; Rollins, D M; Carr, L E; Mallinson, E T; Joseph, S W

    1998-07-01

    E. coli O157:H7 is a food-borne adulterant that can cause hemorrhagic ulcerative colitis and hemolytic uremic syndrome. Faced with an increasing risk of foods contaminated with E. coli O157:H7, food safety officials are seeking improved methods to detect and isolate E. coli O157:H7 in hazard analysis and critical control point systems in meat- and poultry-processing plants. A colony lift immunoassay was developed to facilitate the positive identification and quantification of E. coli O157:H7 by incorporating a simple colony lift enzyme-linked immunosorbent assay with filter monitors and traditional culture methods. Polyvinylidene difluoride (PVDF) membranes (Millipore, Bedford, Mass.) were prewet with methanol and were used to make replicates of every bacterial colony on agar plates or filter monitor membranes that were then reincubated for 15 to 18 h at 36 +/- 1 degree C, during which the colonies not only remained viable but were reestablished. The membranes were dried, blocked with blocking buffer (Kirkegaard and Perry Laboratories [KPL], Gaithersburg, Md.), and exposed for 7 min to an affinity-purified horseradish peroxidase-labeled goat anti-E. coli O157 antibody (KPL). The membranes were washed, exposed to a 3,3',5,5'-tetramethylbenzidine membrane substrate (TMB; KPL) or aminoethyl carbazole (AEC; Sigma Chemical Co., St. Louis, Mo.), rinsed in deionized water, and air dried. Colonies of E. coli O157:H7 were identified by either a blue (via TMB) or a red (via AEC) color reaction. The colored spots on the PVDF lift membrane were then matched to their respective parent colonies on the agar plates or filter monitor membranes. The colony lift immunoassay was tested with a wide range of genera in the family Enterobacteriaceae as well as different serotypes within the E. coli genus. The colony lift immunoassay provided a simple, rapid, and accurate method for confirming the presence of E. coli O157:H7 colonies isolated on filter monitors or spread plates by

  7. Campylobacter in broiler slaughter samples assessed by direct count on mCCDA and Campy-Cefex agar.

    PubMed

    Gonsalves, Camila Cristina; Borsoi, Anderlise; Perdoncini, Gustavo; Rodrigues, Laura Beatriz; do Nascimento, Vladimir Pinheiro

    2016-01-01

    Campylobacter spp. cause foodborne illnesses in humans primarily through the consumption of contaminated chicken. The aim of this study was to evaluate the United States Department of Agriculture's (USDA) recommended methodology, protocol MLG 41.02, for the isolation, identification and direct plate counting of Campylobacter jejuni and C. coli samples from the broiler slaughtering process. A plating method using both mCCDA and Campy-Cefex agars is recommended to recover Campylobacter cells. It is also possible to use this method in different matrices (cloacal swabs and water samples). Cloacal swabs, samples from pre-chiller and post-chiller carcasses and samples of pre-chiller, chiller and direct supply water were collected each week for four weeks from the same flock at a slaughterhouse located in an abattoir in southern Brazil. Samples were analyzed to directly count Campylobacter spp., and the results showed a high frequency of Campylobacter spp. on Campy-Cefex agar. For the isolated species, 72% were identified as Campylobacter jejuni and 38% as Campylobacter coli. It was possible to count Campylobacter jejuni and Campylobacter coli from different samples, including the water supply samples, using the two-agar method. These results suggest that slaughterhouses can use direct counting methods with both agars and different matrices as a monitoring tool to assess the presence of Campylobacter bacteria in their products. PMID:27237112

  8. Controlled evaluation of the agar-slide and radiometric blood culture systems for the detection of bacteremia and fungemia.

    PubMed Central

    Weinstein, M P; Reller, L B; Mirrett, S; Stratton, C W; Reimer, L G; Wang, W L

    1986-01-01

    A commercially available agar-slide blood culture bottle (Septi-Chek; Roche Diagnostics, Div. Hoffman-La Roche, Inc., Nutley, N.J.) was compared with the radiometric blood culture system (BACTEC; Johnston Laboratories, Inc., Towson, Md.) in 8,544 paired blood cultures from adult patients. The systems were inoculated with equal volumes (10 ml) of blood. Overall, there was no statistically significant difference between the two systems in the recovery of clinically important microorganisms, but significantly more members of the family Enterobacteriaceae other than Escherichia coli were detected by the agar-slide system (P less than 0.005). The agar-slide system detected more fungi, and the BACTEC detected more anaerobic bacteria; however, small numbers of recovered organisms precluded statistical significance. When microorganisms grew in both systems, their presence was detected one or more days earlier in the BACTEC (P less than 0.001). More contaminants grew in the agar-slide system (P less than 0.001). Both systems performed well, and either system should provide high yield and prompt detection of positive blood cultures in patients with bacteremia and fungemia if used in an optimal way as recommended by the respective manufacturers. PMID:3517047

  9. Effects of immersion disinfection of agar-alginate combined impressions on the surface properties of stone casts.

    PubMed

    Iwasaki, Yukiko; Hiraguchi, Hisako; Iwasaki, Eriko; Yoneyama, Takayuki

    2016-01-01

    This study investigated the effects of disinfection of agar-alginate combined impressions on the surface properties of the resulting stone casts. Two brands of cartridge-form agar impression material and one alginate impression material were used. Agar-alginate combined impressions of smooth glass plates were prepared. The impressions were immersed in 0.55% ortho-phthalaldehyde solution or 0.5% sodium hypochlorite solution for 1, 3, 5 and 10 min. A stone cast made with an impression that had not been immersed was prepared as a control. The surface roughness (Ra) of the stone casts was measured, and the cast surfaces were observed by SEM. Immersion of agar-alginate combined impressions in 0.5% sodium hypochlorite solution for up to 10 min had no serious adverse effects on the surface properties of the stone casts. In contrast, even 1 min of immersion in 0.55% ortho-phthalaldehyde solution caused deterioration of the cast surface properties. PMID:26843442

  10. Hydrogen-bond-mediated in situ fabrication of AgNPs/agar/PAN electrospun nanofibers as reproducible SERS substrates.

    PubMed

    Yang, Tong; Yang, Hui; Zhen, Shu Jun; Huang, Cheng Zhi

    2015-01-28

    Reproducibility in surface enhanced Raman scattering (SERS) measurements is a challenge. This work developed a facile way to make highly dispersed uniform silver nanoparticles (AgNPs) loaded in the agar/polyacrylonitrile (PAN) nanofibers by the coupling the electrospinning technology from metal complex-containing polymer solution and in situ photoreductive technique. Agar, as hydrophilic component, was introduced into the electrospinning solution considering that its abundant hydroxyl group sites could greatly improve the contents of silver ions in the polymers because of the rich silver ion chelated with the hydroxyl group, whereas hydrophilic agar was integrated with hydrophobic PAN by -OH···N≡C- hydrogen bonds as a bridge. Meanwhile, the in situ photoreductive reaction was made under different light irradiations such as desk lamp, 365 nm UV-lamp, and 254 nm UV-lamp. High yield of stable AgNPs with highly uniform and dispersion are available in the agar/PAN nanofibers after the in situ photoreductive reaction, supplying the possibility of reproducible SERS signals. To identify that concept of proof, a facile approach for the determination of malachite green (MG) in three environmental practical samples was demonstrated by using the composite nanofibrous material irradiated by 365 nm UV-lamp, giving the minimum detection concentration of MG as low as 0.1 μmol/L with a good linear response ranging from 0.1-100 μmol/L (R(2) = 0.9960). PMID:25546719

  11. NMR analysis of weak molecular interactions using slice-selective experiments via study of concentration gradients in agar gels.

    PubMed

    Mitrev, Y; Simova, S; Jeannerat, D

    2016-04-01

    Weak molecular interactions can be localized and quantified using a single NMR experiment analysing concentration gradients generated in agar gels. The spectra from various cross-sections along the gradient were obtained using a slice-selective pulse sequence realisable with standard NMR equipment. PMID:27009847

  12. Apparatus for diffusion separation

    DOEpatents

    Nierenberg, William A.; Pontius, Rex B.

    1976-08-10

    1. The method of testing the separation efficiency of porous permeable membranes which comprises causing a stream of a gaseous mixture to flow into contact with one face of a finely porous permeable membrane under such conditions that a major fraction of the mixture diffuses through the membrane, maintaining a rectangular cross section of the gaseous stream so flowing past said membrane, continuously recirculating the gas that diffuses through said membrane and continuously withdrawing the gas that does not diffuse through said membrane and maintaining the volume of said recirculating gas constant by continuously introducing into said continuously recirculating gas stream a mass of gas equivalent to that which is continuously withdrawn from said gas stream and comparing the concentrations of the light component in the entering gas, the withdrawn gas and the recirculated gas in order to determine the efficiency of said membrane.

  13. Testing.

    ERIC Educational Resources Information Center

    Killoran, James, Ed.

    1984-01-01

    This journal issue addresses the issue of testing in the social studies classroom. The first article, "The Role of Testing" (Bragaw), focuses on the need for tests to reflect the objectives of the study completed. The varying functions of pop quizzes, weekly tests, and unit tests are explored. "Testing Thinking Processes" (Killoran, Zimmer, and…

  14. [Variations in hyperbilirrubinemia in low birth weight newborns under phototherapy and continous or discontinous agar oral administration (author's transl)].

    PubMed

    Colomer, J; Moya, M; Marco, V; De Paredes, C; Escrivá, F; Vila, R

    1975-06-01

    Therapeutic attitude in hyperbilirrubinemia is always worth because other infrequent complications but not for this, less important. Phototherapy innocuousness, largely demonstrated, fosters its profilactic use at beginning and not only for those babies with serum bilirrubin over 10 mg % in the first day of life. Previously we have reported positive results with agar oral administration without collateral effects. On this grounds we have planned the following experience in a homogenous group of L.B.W.: one group was fed with agar previously to each formula administration; other group received the same amount of agar but divided in only three administrations in 24 hours; the last group received continuous phototherapy for 96 hours with a white cold fluorescent light from a source of 8-Vita-lite lamp of 40 watts with a intensity of 500 foot candle and 30 lumens. All of these babies weighed less than 2.500 g. and were between 10 and 90 percentil of Lubschenko diagram. They were fed with the same formula and same time table with no infusions, rejecting all that presented any type of pathology. Obstetric conditions were basically identical. This population was randomly divided in four groups. 1) Control group with no profilaxis, but with identical bilirrubin andhematocrit determinations. 2) Group with continuous agar oral administration, 125 mg. before each of the seven formula feeding. 3) Group with discontinuous agar administration, 250 mg. before three of the seven formula feeding. 4) Group with continuous phototherapy for 96 hours. These is initial identification of the groups with statistic signification, and after that a quantitative and sequential evolution of bilirrubin is analized in each group. PMID:1155873

  15. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria)

    NASA Astrophysics Data System (ADS)

    Kupka, Teobald; Wieczorek, Piotr P.

    2016-01-01

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of 1H and 13C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs.

  16. Spectral filtering for improved pulsed photothermal temperature profiling in agar tissue phantoms

    PubMed Central

    Milanič, Matija; Majaron, Boris; Nelson, J. Stuart

    2009-01-01

    We present a systematic experimental comparison of pulsed photothermal temperature profiling utilizing the customary spectral band of the InSb radiation detector (λ=3.0 to 5.6 μm) and a narrowed acquisition band (4.5 to 5.6 μm). We use custom tissue phantoms composed of agar gel layers separated by thin absorbing layers. The laser-induced temperature profiles are reconstructed within the customary monochromatic approximation, using a custom minimization algorithm. In a detailed numerical simulation of the experimental procedure, we consider several acquisition spectral bands with the lower wavelength limit varied between 3.0 and 5.0 μm (imitating application of different long-pass filters). The simulated PPTR signals contain noise with amplitude and spectral characteristics consistent with our experimental system. Both experimental and numerical results indicate that spectral filtering reduces reconstruction error and broadening of temperature peaks, especially for shallower and more complex absorbing structures. For the simulated PPTR system and watery tissues, numerical results indicate an optimal lower wavelength limit of 3.8 to 4.2 μm. PMID:19123649

  17. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria).

    PubMed

    Kupka, Teobald; Wieczorek, Piotr P

    2016-01-15

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of (1)H and (13)C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs. PMID:26312739

  18. Mercury and its bioconcentration factors in fly agaric (Amanita muscaria) from spatially distant sites in Poland.

    PubMed

    Falandysz, J; Lipka, K; Mazur, A

    2007-09-01

    Total mercury content has been determined in the fruiting bodies of fly agaric (Amanita muscaria) and topsoil layer (0-10 cm) collected from 14 spatially distant sites across Poland. Mercury was measured by cold-vapor atomic absorption spectroscopy (CV-AAS) after nitric acid (mushrooms) or nitric acid and sulfuric acid (soil) digestion of the samples. The caps, depending on the site, contained total mercury at mean concentrations from 0.24+/-0.13 to 1.4+/-0.6 microg/g dm (median 0.19-1.4 microg/g dm), and stalks from 0.18+/-0.06 to 0.71+/-0.26 microg/g dm (median 0.18-0.67 microg/g dm). An overall-mean the total mercury content for 204 caps and stalks was, respectively, 0.73+/-0.55 (0.05-3.3 microg/g dm) and 0.43+/-0.33 (0.09-2.3 microg/g dm). PMID:17849304

  19. Comparison of CHROMagar Salmonella Medium and Hektoen Enteric Agar for Isolation of Salmonellae from Stool Samples

    PubMed Central

    Gaillot, Olivier; Di Camillo, Patrick; Berche, Patrick; Courcol, René; Savage, Colette

    1999-01-01

    CHROMagar Salmonella (CAS), a new chromogenic medium, was retrospectively compared to Hektoen enteric agar (HEA) with 501 Salmonella stock isolates and was then prospectively compared to HEA for the detection and presumptive identification of Salmonella spp. with 508 stool samples before and after enrichment. All stock cultures (100%), including cultures of H2S-negative isolates, yielded typical mauve colonies on CAS, while 497 (99%) isolates produced typical lactose-negative, black-centered colonies on HEA. Following overnight incubation at 37°C, a total of 20 Salmonella strains were isolated from the 508 clinical samples. Sensitivities for primary plating and after enrichment were 95% (19 isolates) and 100% (20 isolates), respectively, for CAS and 80% (16 isolates) and 100% (20 isolates), respectively, for HEA. The specificity of CAS (88.9%) was significantly higher than that of HEA (78.5%; P < 0.0001). On the basis of its good sensitivity and specificity, CAS medium can be recommended for use for primary plating when human stool samples are screened for Salmonella spp. PMID:9986847

  20. Studies on the inactivation of medically important Candida species on agar surfaces using pulsed light.

    PubMed

    Farrell, Hugh; Garvey, Mary; Rowan, Neil

    2009-09-01

    Development of a pulsed-light (PL) approach to inanimate surface decontamination is timely, as the incidence of yeast-related infections in healthcare remains unacceptably high. Critical electrical and biological factors governing the efficacy of PL for the in vitro inactivation of medically important yeast were established in this study. Predetermined cell numbers of yeast were inoculated separately on agar plates and were flashed with < or =90 pulses of broad-spectrum light under varying operating conditions, and their inactivation was measured. Significant differences in inactivation among different yeasts occurred depending on the intensity of the applied lamp discharge energy and the amount of pulsing applied. Levels of yeast sensitivity also varied depending on the distance between the light source and the treatment surface used, and the population size, type and age of cultures treated. Yeast strains were shown to be significantly more resistant to PL irradiation compared with similarly treated bacterial control cultures. A clear relationship was observed between the concentration of eluted proteins from treated yeast and the severity of PL conditions, with scanning electron micrographs showing irreversible cellular damage. Therefore, the findings from this study will enable further development and optimization of PL as a method of decontaminating surfaces in healthcare setting. PMID:19624750