Science.gov

Sample records for agar dilution assay

  1. Screening fungicides for use in fish culture: Evaluation of the agar plug transfer, cellophane transfer, and agar dilution methods

    USGS Publications Warehouse

    Bailey, Tom A.

    1983-01-01

    The reliability, reproducibility, and usefulness of three screening methods -- the cellophane transfer, the agar plug transfer, and the agar dilution -- to screen aquatic fungicides were evaluated. Achlya flagellata and Saprolegnia hypogyna were exposed to 1, 10, and 100 mg/L of malachite green to test each method. The cellophane transfer and agar plug transfer techniques had similar reliability and reproducibility in rating fungicidal activity, and were both superior to the agar dilution technique. The agar plug transfer and agar dilution techniques adequately projected in vivo activity of malachite green, but the cellophane transfer technique overestimated its activity. Overall, the agar plug transfer technique most accurately rated the activity of malachite green and was the easiest test to perform. It therefore appears to be the method of choice for testing aquatic fungicides.

  2. Comparison of spiral gradient and conventional agar dilution for susceptibility testing of anaerobic bacteria.

    PubMed Central

    Wexler, H M; Molitoris, E; Jashnian, F; Finegold, S M

    1991-01-01

    Antimicrobial susceptibility tests were performed on brucella laked blood agar with 340 isolates and 14 antimicrobial agents by the standard agar dilution technique and the spiral gradient technique in which antibiotic concentrations were established by diffusion from the agar surface. For comparison, spiral gradient MICs were determined by calculating antimicrobial concentrations at growth endpoints and rounding up to the next twofold incremental concentration. The cumulative percentage of strains susceptible at the breakpoint determined from spiral gradient data was within 10%, generally, of the percentage of strains susceptible at the breakpoint determined from agar dilution data. The overall agreement between the two techniques (within one doubling dilution) was 90.6%. The spiral gradient agar dilution technique is a reasonable alternative to the conventional agar dilution technique for susceptibility testing of anaerobic bacteria. Images PMID:1929262

  3. Antimicrobial susceptibility of Erysipelothrix rhusiopathiae isolated from pigs in Southern Japan with a modified agar dilution method.

    PubMed

    Chuma, Takehisa; Kawamoto, Toshio; Shahada, Francis; Fujimoto, Hideki; Okamoto, Karoku

    2010-05-01

    The determination of antimicrobial minimum inhibitory concentration (MIC) in Erysipelothrix rhusiopathiae by using the agar dilution method has not been covered by the Clinical and Laboratory Institute (CLSI). Only the broth microdilution method has been outlined. This report describes a modification of the agar dilution procedure for E. rhusiopathiae using Trypto-soy agar supplemented with 0.1% Tween 80 and incubation in ambient air at 37 degrees C for 24 hr. The MICs of the assay were in agreement with those of the broth microdilution method recommended by the CLSI. Antimicrobial susceptibility test was performed using this method for 149 E. rhusiopathiae isolates from 2 meat processing plants in Kagoshima Prefecture during the period of April 2004 to March 2005. The number of strains resistant to oxytetracycline, erythromycin, lincomycin, ofloxacin and enrofloxacin were 56 (37.6%), 4 (2.7%), 18 (12.1%), 21 (14.1%) and 19 (12.8%), respectively. All strains were susceptible to ampicillin.

  4. Statistical inference for serial dilution assay data.

    PubMed

    Lee, M L; Whitmore, G A

    1999-12-01

    Serial dilution assays are widely employed for estimating substance concentrations and minimum inhibitory concentrations. The Poisson-Bernoulli model for such assays is appropriate for count data but not for continuous measurements that are encountered in applications involving substance concentrations. This paper presents practical inference methods based on a log-normal model and illustrates these methods using a case application involving bacterial toxins.

  5. Characterization of Leptospiral Chemoreceptors Using a Microscopic Agar Drop Assay.

    PubMed

    Affroze, Samia; Islam, Md Shafiqul; Takabe, Kyosuke; Kudo, Seishi; Nakamura, Shuichi

    2016-08-01

    Bacterial chemotaxis is induced by sensing chemical stimuli via chemoreceptors embedded in the cytoplasmic membrane, enabling the cells to migrate toward nutrients or away from toxins. The chemoreceptors of Escherichia coli and Salmonella spp. have been well studied and are functionally classified on the basis of detectable substrates. The spirochete Leptospira possesses more than ten chemoreceptors and shows attractive or repellent responses against some sugars, amino acids, and fatty acids. However, the roles of these chemoreceptors have not been investigated. In this study, we conducted a chemotaxis assay called microscopic agar drop assay in combination with competition experiments, determining whether two kinds of attractants are recognized by the same type of chemoreceptor in the saprophytic Leptospira strain, Leptospira biflexa. Analyzing the competition effect observed between several pairs of chemicals, we found that L. biflexa senses sugars via chemoreceptors different from those that sense amino acids and fatty acids.

  6. Multilaboratory Comparison of Proficiencies in Susceptibility Testing of Helicobacter pylori and Correlation between Agar Dilution and E Test Methods

    PubMed Central

    Best, L. M.; Haldane, D. J. M.; Keelan, M.; Taylor, D. E.; Thomson, A. B. R.; Loo, V.; Fallone, C. A.; Lyn, P.; Smaill, F. M.; Hunt, R.; Gaudreau, C.; Kennedy, J.; Alfa, M.; Pelletier, R.; Veldhuyzen van Zanten, S. J. O.

    2003-01-01

    Susceptibility testing was performed at seven Canadian microbiology laboratories and the Helicobacter Reference Laboratory, Halifax, Nova Scotia, Canada, to assess susceptibility testing proficiency and the reproducibility of the results for clarithromycin and metronidazole and to compare the Epsilometer test (E test) method to the agar dilution reference method. Control strain Helicobacter pylori ATCC 43504 (American Type Culture Collection) and 13 clinical isolates (plus duplicates of four of these strains including ATCC 43504) were tested blindly. The National Committee for Clinical Laboratory Standards (NCCLS) guidelines for agar dilution testing were followed, and the same suspension of organisms was used for agar dilution and E test. Antimicrobials and E test strips were provided to the investigators. Methods were provided on a website (www.Helicobactercanada.org). Each center reported MICs within the stated range for strain ATCC 43504. Compared to the average MICs, interlaboratory agreements within 2 log2 dilutions were 90% (range, 69 to 100%) for clarithromycin by agar dilution, with seven very major errors [VMEs], and 85% (range, 65 to 100%) by E test, with three VMEs. Interlaboratory agreements within 2 log2 dilutions were 83% (range, 50 to 100%) for metronidazole by agar dilution, with six VMEs and eight major errors (MEs), and 75% (range, 50 to 94%) by E test, with four VMEs and four MEs. At lower and higher concentrations of antibiotic, E test MICs were slightly different from agar dilution MICs, but these differences did not result in errors. When a standardized protocol based on NCCLS guidelines was used, most participants in this study correctly identified clarithromycin- and metronidazole-susceptible and -resistant strains of H. pylori 93% of the time by either the agar dilution or E test method, and the numbers of errors were relatively equivalent by both methods. PMID:14506021

  7. Multilaboratory comparison of proficiencies in susceptibility testing of Helicobacter pylori and correlation between agar dilution and E test methods.

    PubMed

    Best, L M; Haldane, D J M; Keelan, M; Taylor, D E; Thomson, A B R; Loo, V; Fallone, C A; Lyn, P; Smaill, F M; Hunt, R; Gaudreau, C; Kennedy, J; Alfa, M; Pelletier, R; Veldhuyzen Van Zanten, S J O

    2003-10-01

    Susceptibility testing was performed at seven Canadian microbiology laboratories and the Helicobacter Reference Laboratory, Halifax, Nova Scotia, Canada, to assess susceptibility testing proficiency and the reproducibility of the results for clarithromycin and metronidazole and to compare the Epsilometer test (E test) method to the agar dilution reference method. Control strain Helicobacter pylori ATCC 43504 (American Type Culture Collection) and 13 clinical isolates (plus duplicates of four of these strains including ATCC 43504) were tested blindly. The National Committee for Clinical Laboratory Standards (NCCLS) guidelines for agar dilution testing were followed, and the same suspension of organisms was used for agar dilution and E test. Antimicrobials and E test strips were provided to the investigators. Methods were provided on a website (www.Helicobactercanada.org). Each center reported MICs within the stated range for strain ATCC 43504. Compared to the average MICs, interlaboratory agreements within 2 log(2) dilutions were 90% (range, 69 to 100%) for clarithromycin by agar dilution, with seven very major errors [VMEs], and 85% (range, 65 to 100%) by E test, with three VMEs. Interlaboratory agreements within 2 log(2) dilutions were 83% (range, 50 to 100%) for metronidazole by agar dilution, with six VMEs and eight major errors (MEs), and 75% (range, 50 to 94%) by E test, with four VMEs and four MEs. At lower and higher concentrations of antibiotic, E test MICs were slightly different from agar dilution MICs, but these differences did not result in errors. When a standardized protocol based on NCCLS guidelines was used, most participants in this study correctly identified clarithromycin- and metronidazole-susceptible and -resistant strains of H. pylori 93% of the time by either the agar dilution or E test method, and the numbers of errors were relatively equivalent by both methods.

  8. Stable isotope dilution assays in mycotoxin analysis.

    PubMed

    Rychlik, Michael; Asam, Stefan

    2008-01-01

    The principle and applications of stable isotope dilution assays (SIDAs) in mycotoxin analysis are critically reviewed. The general section includes historical aspects of SIDAs, the prerequisites and limitations of the use of stable isotopically labelled internal standards, and possible calibration procedures. In the application section actual SIDAs for the analysis of trichothecenes, zearalenone, fumonisins, patulin, and ochratoxin A are presented. The syntheses and availability of labelled mycotoxins for use as internal standards is reviewed and specific advances in food analysis and toxicology are demonstrated. The review indicates that LC-MS applications, in particular, require the use of stable isotopically labelled standards to compensate for losses during clean-up and for discrimination due to ion suppression. As the commercial availability of these compounds continues to increase, SIDAs can be expected to find expanding use in mycotoxin analysis.

  9. Evaluation of agar dilution and broth microdilution methods to determine the disinfectant susceptibility.

    PubMed

    Wu, Guoyan; Yang, Qianru; Long, Mei; Guo, Lijuan; Li, Bei; Meng, Yue; Zhang, Anyun; Wang, Hongning; Liu, Shuliang; Zou, Likou

    2015-11-01

    A variety of disinfectants have been widely used in veterinary hygiene, food industries and environments, which could induce the development of bacterial resistance to disinfectants. The methods used to investigate antimicrobial effects of disinfectant vary considerably among studies, making comparisons difficult. In this study, agar dilution and broth microdilution methods were used to compare the antimicrobial activities of four quaternary ammonium compounds (QACs) against foodborne and zoonotic pathogens. The potential relationship between the presence of QACs resistance genes and phenotypic resistance to QACs was also investigated. Our results indicated that the minimum inhibitory concentrations (MICs) determined by two methods might be different depended upon different QACs and bacteria applied. Regardless of the testing methods, Klebsiella pneumoniae was more tolerant among Gram-negative strains to four QACs, followed by Salmonella and Escherichia coli. The agreement between MICs obtained by the two methods was good, for benzalkonium chloride (78.15%), didecyldimethylammonium chloride (DDAC) (82.35%), cetylpyridinium chloride (CTPC) (97.48%) and cetyltrimethylammonium bromide (CTAB) (99.16%), respectively. Among all Gram-negative bacteria, 94.55% (n=52) of qacEΔ1-positive strains showed higher MICs (512 mg l(-1)) to CTAB. The qacEΔ1 gene was highly associated (P<0.05) with the high MICs of QACs (⩾512 mg l(-1)). In addition, DDAC remained as the most effective disinfectant against both Gram-positive and Gram-negative bacteria. This is the first study that compared the agar dilution and broth microdilution methods to assess the antimicrobial activity of QACs. The study demonstrated the need to standardize method that would be used in evaluating QACs antimicrobial properties in the future.

  10. Antimicrobial susceptibility of Brazilian Clostridium difficile strains determined by agar dilution and disk diffusion.

    PubMed

    Fraga, Edmir Geraldo; Nicodemo, Antonio Carlos; Sampaio, Jorge Luiz Mello

    2016-01-01

    Clostridium difficile is a leading cause of diarrhea in hospitalized patients worldwide. While metronidazole and vancomycin are the most prescribed antibiotics for the treatment of this infection, teicoplanin, tigecycline and nitazoxanide are alternatives drugs. Knowledge on the antibiotic susceptibility profiles is a basic step to differentiate recurrence from treatment failure due to antimicrobial resistance. Because C. difficile antimicrobial susceptibility is largely unknown in Brazil, we aimed to determine the profile of C. difficile strains cultivated from stool samples of inpatients with diarrhea and a positive toxin A/B test using both agar dilution and disk diffusion methods. All 50 strains tested were sensitive to metronidazole according to CLSI and EUCAST breakpoints with an MIC90 value of 2μg/mL. Nitazoxanide and tigecycline were highly active in vitro against these strains with an MIC90 value of 0.125μg/mL for both antimicrobials. The MIC90 were 4μg/mL and 2μg/mL for vancomycin and teicoplanin, respectively. A resistance rate of 8% was observed for moxifloxacin. Disk diffusion can be used as an alternative to screen for moxifloxacin resistance, nitazoxanide, tigecycline and metronidazole susceptibility, but it cannot be used for testing glycopeptides. Our results suggest that C. difficile strains from São Paulo city, Brazil, are susceptible to metronidazole and have low MIC90 values for most of the current therapeutic options available in Brazil.

  11. Improved soft-agar colony assay in a fluid processing apparatus.

    PubMed

    Forsman, A D; Herpich, A R; Chapes, S K

    1999-01-01

    The standard method for quantitating bone marrow precursor cells has been to count the number of colony-forming units that form in semisolid (0.3%) agar. Recently we adapted this assay for use in hardware, the Fluid Processing Apparatus, that is flown in standard payload lockers of the space shuttle. When mouse or rat macrophage colony-forming units were measured with this hardware in ground-based assays, we found significantly more colony growth than that seen in standard plate assays. The improved growth correlates with increased agar thickness but also appears to be due to properties inherent to the Fluid Processing Apparatus. This paper describes an improved method for determining bone marrow macrophage precursor numbers in semisolid agar.

  12. Metronidazole susceptibility testing for Helicobacter pylori: comparison of disk, broth, and agar dilution methods and their clinical relevance.

    PubMed Central

    DeCross, A J; Marshall, B J; McCallum, R W; Hoffman, S R; Barrett, L J; Guerrant, R L

    1993-01-01

    Since the methods for metronidazole susceptibility testing of Helicobacter pylori have not been standardized or validated, we compared three methods that are used to test the metronidazole susceptibilities of 25 isolates of H. pylori. Specifically, we examined the methods of Steer's replicator agar dilution, tube broth microdilution, and modified Kirby-Bauer disk diffusion. The metronidazole disk zone sizes obtained by the disk diffusion method correlated well (r = 0.74) with the MICs obtained by the agar dilution method. Afterward, the disk diffusion method was used to characterize the metronidazole susceptibilities of 44 isolates of H. pylori. Dual therapy (bismuth and metronidazole) proved to be highly effective against metronidazole-susceptible strains (81.6% eradication rate) but fared poorly against resistant strains (16.7% eradication rate; P < 0.01). Using agar dilution testing, we validated the modified Kirby-Bauer disk diffusion method for metronidazole susceptibility testing of H. pylori and conclude that it is practical, accurate, and clinically applicable. PMID:8370723

  13. Radiation survival of murine and human melanoma cells utilizing two assay systems: monolayer and soft agar.

    PubMed Central

    Yohem, K. H.; Slymen, D. J.; Bregman, M. D.; Meyskens, F. L.

    1988-01-01

    The radiation response of murine and human melanoma cells assayed in bilayer soft agar and monolayer was examined. Cells from the murine melanoma Cloudman S91 CCL 53.1 cell line and three human melanoma cell strains (C8146C, C8161, and R83-4) developed in our laboratory were irradiated by single dose X-rays and plated either in agar or on plastic. D0 values were the same within 95% confidence intervals for cells from the human melanoma cell strains C8146C, C8161, and R83-4 but were dissimilar for the murine cell line CCL 53.1 Dq values were different for all cells studied. The shape of the survival curve for all four melanomas was not identical for cells assayed in soft agar versus cells grown on plastic. This would indicate that apparent radiosensitivity was influenced by the method of assay although there were no apparent consistent differences between the curves generated by monolayer or bilayer soft agar assays. PMID:3348949

  14. A supplemented soft agar chemotaxis assay demonstrates the Helicobacter pylori chemotactic response to zinc and nickel

    PubMed Central

    Sanders, Lisa; Andermann, Tessa M.

    2013-01-01

    Directed motility, or chemotaxis, is required for Helicobacter pylori to establish infection in the stomach, although the full repertoire of this bacterium’s chemotactic responses is not yet known. Here we report that H. pylori responds to zinc as an attractant and nickel as a repellent. To reach this conclusion, we employed both a temporal chemotaxis assay based on bacterial reversals and a supplemented soft agar spatial assay. We refined the temporal assay using a previously described chemorepellent, acid, and found that H. pylori requires rich media with serum to maintain optimal swimming motility. Surprisingly, we found that some strains respond to acid as an attractant, and that the TlpC chemoreceptor correlated with whether acid was sensed as an attractant or repellent. Using this same assay, we detected weak repellent responses to nickel and copper, and a varied response to zinc. We thus developed an alternative spatial chemotactic assay called the supplemented soft agar assay, which utilizes soft agar medium supplemented with the test compound. With Escherichia coli, the attractant serine slowed overall bacterial migration, while the repellent nickel increased the speed of overall migration. In H. pylori we detected slowed migration with doubled tryptone media, as well as zinc, consistent with an attractant response. In contrast, nickel increased migration, consistent with repulsion. PMID:23139399

  15. Visualization of the Charcoal Agar Resazurin Assay for Semi-quantitative, Medium-throughput Enumeration of Mycobacteria

    PubMed Central

    Gold, Ben; Lopez Quezada, Landys; Glasheen, Jou; Ballinger, Elaine; Somersan-Karakaya, Selin; Warrier, Thulasi; Nathan, Carl

    2016-01-01

    There is an urgent need to discover and progress anti-infectives that shorten the duration of tuberculosis (TB) treatment. Mycobacterium tuberculosis, the etiological agent of TB, is refractory to rapid and lasting chemotherapy due to the presence of bacilli exhibiting phenotypic drug resistance. The charcoal agar resazurin assay (CARA) was developed as a tool to characterize active molecules discovered by high-throughput screening campaigns against replicating and non-replicating M. tuberculosis. Inclusion of activated charcoal in bacteriologic agar medium helps mitigate the impact of compound carry-over, and eliminates the requirement to pre-dilute cells prior to spotting on CARA microplates. After a 7-10 day incubation period at 37 °C, the reduction of resazurin by mycobacterial microcolonies growing on the surface of CARA microplate wells permits semi-quantitative assessment of bacterial numbers via fluorometry. The CARA detects approximately a 2-3 log10 difference in bacterial numbers and predicts a minimal bactericidal concentration leading to ≥99% bacterial kill (MBC≥99). The CARA helps determine whether a molecule is active on bacilli that are replicating, non-replicating, or both. Pilot experiments using the CARA facilitate the identification of which concentration of test agent and time of compound exposure require further evaluation by colony forming unit (CFU) assays. In addition, the CARA can predict if replicating actives are bactericidal or bacteriostatic. PMID:28060290

  16. Agar plate freezing assay for the in situ selection of transformed ice nucleating bacteria.

    PubMed

    Anastassopoulos, Elias

    2006-10-01

    An agar plate freezing assay is described based on the incorporation of fluorescein dye in agar medium. Upon addition of fluorescein the medium becomes transparent. This facilitates the monitoring of the ice nucleation event in vivo and the subsequent in situ selection of transformed ice nucleating bacteria. In comparison with known assays for the screening of transformants, the proposed assay is very accurate and reproducible. It may be applied in environmental samples screening for ice nucleating organisms, or in cDNA or genomic libraries for identifying novel ice nucleation genes. It may also prove useful in comparative studies of the ice nucleation activity, e.g. in directed evolution experiments involving ice nucleation genes.

  17. Oxacillin susceptibility testing of Staphylococcus saprophyticus using disk diffusion, agar dilution, broth microdilution, and the Vitek GPS-105 card.

    PubMed

    Ramotar, K; Woods, W; Toye, B

    2001-08-01

    Eighty-three mecA negative isolates of S. saprophyticus had oxacillin zone diameters agar dilution, broth microdilution, or the Vitek GPS-105 card. Greater than 90% of these isolates would be considered resistant using NCCLS M7-A5, M100-S10 criteria. These results suggest that the current NCCLS MIC and zone diameter breakpoints for oxacillin resistance in coagulase-negative Staphylococci are not appropriate for S. saprophyticus as they do not correlate with the presence of the mecA gene.

  18. Antibiotic susceptibility of Stenotrophomonas (Xanthomonas) maltophilia: comparative (NCCLS criteria) evaluation of antimicrobial drugs with the agar dilution and the agar disk diffusion (Bauer-Kirby) tests.

    PubMed

    Traub, W H; Leonhard, B; Bauer, D

    1998-01-01

    Ninety-six clinical isolates of Stenotrophomonas maltophilia were examined with the agar dilution method for susceptibility to 19 antimicrobial drugs. Doxycycline, cotrimoxazole, timentin, ofloxacin, fosfomycin, and piperacillin + tazobactam, in that order, inhibited the majority of strains. All isolates were resistant to nitrofurantoin. Concurrent disk susceptibility (Bauer-Kirby method) testing, using currently valid NCCLS interpretative criteria for Pseudomonas aeruginosa, uncovered a significant incidence of very major (category I), major (category II), and minor (categories III and IV) discrepancies for aminoglycosides, cephalosporins, chloramphenicol, and piperacillin + tazobactam and ticarcillin + clavulanic acid. Therefore, new interpretative criteria indicative of intermediate (I) susceptibility of S. maltophilia to these various antibiotics were proposed. In addition, new intermediate susceptibility criteria were proposed for the two beta-lactam-beta-lactamase inhibitor combinations. It was recommended to exclude ciprofloxacin from test batteries against this microorganism due to the wide scatter of minimal inhibitory concentration values and diameters of inhibition zones; the same was true for polymyxin B. It is hoped that the proposed modified, species-specific criteria will improve the clinical utility of laboratory-generated disk antibiograms with respect to the inherently multiple antibiotic-resistant, opportunistic pathogen S. maltophilia.

  19. Inaccuracy of the disk diffusion method compared with the agar dilution method for susceptibility testing of Campylobacter spp.

    PubMed

    Lehtopolku, Mirva; Kotilainen, Pirkko; Puukka, Pauli; Nakari, Ulla-Maija; Siitonen, Anja; Eerola, Erkki; Huovinen, Pentti; Hakanen, Antti J

    2012-01-01

    The agar dilution method has been standardized by the CLSI for the susceptibility testing of Campylobacter species, and according to these standards, the disk diffusion method should be used only in screening for macrolide and ciprofloxacin resistance. Nevertheless, the disk diffusion test is currently widely used, since it is easy to perform in clinical microbiology laboratories. In this study, the disk diffusion method was compared to the agar dilution method by analyzing the in vitro activities of seven antimicrobial agents against 174 Campylobacter strains collected in Finland between 2003 and 2008. Recommendations of the CLSI were followed using Mueller-Hinton agar plates with 5% of sheep blood. For each strain, the disk diffusion tests were performed two to four times. Of the 33 erythromycin-resistant strains (MIC, ≥16 μg/ml), 24 (73%) constantly showed a 6-mm erythromycin inhibition zone (i.e., no inhibition), while for seven strains the inhibition zone varied from 6 to 44 mm in repeated measurements. Among the 141 erythromycin-susceptible strains (MIC, <16 μg/ml), erythromycin inhibition zones varied between 6 and 61 mm. Of the 87 ciprofloxacin-resistant strains, 47 (54%) showed 6-mm inhibition zones, while 40 strains showed inhibition zones between 6 and 60 mm. Significant differences between the repetitions were observed in the disk diffusion for all antimicrobial agents and all strains except for the macrolide-resistant strains regarding the macrolides. For 17 (10%) strains, the variation in repeated measurements was substantial. These results show that the disk diffusion method may not be a reliable tool for the susceptibility testing of Campylobacter spp. Further studies are needed to assess whether the disk diffusion test could be improved or whether all susceptibilities of campylobacters should be tested using an MIC-based method.

  20. Measuring Survival of Hematopoietic Cancer Cells with the Colony-Forming Assay in Soft Agar.

    PubMed

    Crowley, Lisa C; Waterhouse, Nigel J

    2016-08-01

    Colony-forming assays measure the ability of cells in culture to grow and divide into groups. Any cell that has the potential to form a colony may also have the potential to cause cancer or relapse in vivo. Colony-forming assays also provide an indirect measurement of cell death because any cell that is dead or dying will not continue to proliferate. The proliferative capacity of adherent cells such as fibroblasts can be determined by growing cells at low density on culture dishes and counting the number of distinct groups that form over time. Cells that grow in suspension, such as hematopoietic cells, cannot be assayed this way because the cells move freely in the media. Assays to determine the colony-forming ability of hematopoietic cells must therefore be performed in solid matrices that restrict large-scale movement of the cells. One such matrix is soft agar. This protocol describes the use of soft agar to compare the colony-forming ability of untreated hematopoietic cells to the colony-forming ability of hematopoietic cells that have been treated with a cytotoxic agent.

  1. Comparison of agar dilution and antibiotic gradient strip test with broth microdilution for susceptibility testing of swine Brachyspira species.

    PubMed

    Mirajkar, Nandita S; Gebhart, Connie J

    2016-03-01

    Production-limiting diseases in swine caused by Brachyspira are characterized by mucohemorrhagic diarrhea (B. hyodysenteriae and "B. hampsonii") or mild colitis (B. pilosicoli), while B. murdochii is often isolated from healthy pigs. Emergence of novel pathogenic Brachyspira species and strains with reduced susceptibility to commonly used antimicrobials has reinforced the need for standardized susceptibility testing. Two methods are currently used for Brachyspira susceptibility testing: agar dilution (AD) and broth microdilution (BMD). However, these tests have primarily been used for B. hyodysenteriae and rarely for B. pilosicoli. Information on the use of commercial susceptibility testing products such as antibiotic gradient strips is lacking. Our main objective was to validate and compare the susceptibility results, measured as the minimum inhibitory concentration (MIC), of 6 antimicrobials for 4 Brachyspira species (B. hyodysenteriae, "B. hampsonii", B. pilosicoli, and B. murdochii) by BMD and AD (tiamulin, valnemulin, lincomycin, tylosin, and carbadox) or antibiotic gradient strip (doxycycline) methods. In general, the results of a high percentage of all 4 Brachyspira species differed by ±1 log2 dilution or less by BMD and AD for tiamulin, valnemulin, lincomycin, and tylosin, and by BMD and antibiotic gradient strip for doxycycline. The carbadox MICs obtained by BMD were 1-5 doubling dilutions different than those obtained by AD. BMD for Brachyspira was quicker to perform with less ambiguous interpretation of results when compared with AD and antibiotic gradient strip methods, and the results confirm the utility of BMD in routine diagnostics.

  2. Development and validation of a microbiological agar assay for determination of cefuroxime sodium in pharmaceutical preparations.

    PubMed

    Schmidt, Cleber A; Agarrayua, Danielle A; Laporta, Luciane V; Machado, Jaison C; Manfio, Maria L; Bittencourt, Celso F

    2009-06-01

    Cefuroxime (CFU) is a semi-synthetic cephalosporin with a relatively broad-spectrum antimicrobial activity, and belongs to the second generation of cephalosporins. Regarding the quality control of medicines, a validated microbiological assay for determination of cefuroxime sodium in pharmaceutical formulations has not been reported yet. With this purpose, this paper reports the development and validation of a simple, sensitive, accurate and reproducible agar diffusion method to quantify CFU sodium in injectable formulations. The assay is based on the inhibitory effect of CFU upon the strain of Staphylococcus aureus ATCC 6538P used as test microorganism. The results were treated statistically by analysis of variance and were found to be linear (r=0.9998) in the selected range of 8.0-32.0 microg/ml; precise [repeatability: relative standard deviation (RSD)=1.56%; intermediate precision: between-day RSD=1.27%; between analyst RSD=1.13%] and accurate (101.58%). The bioassay specificity was studied by evaluation of degraded sample at 50 degrees C with analysis at 0, 24 and 48 h in parallel with the pharmacopeial liquid chromatography method for CFU. The results demonstrated the validity of the proposed bioassay, which allows reliable quantitation of CFU sodium in pharmaceutical samples and therefore can be used as a useful alternative methodology for the routine quality control of this medicine.

  3. Development and Validation of a Microbiological Agar Assay for Determination of Orbifloxacin in Pharmaceutical Preparation

    PubMed Central

    Cazedey, Edith C. L.; Salgado, Hérida R. N.

    2011-01-01

    Orbifloxacin is a fluoroquinolone with broad-spectrum antimicrobial activity, and belongs to the third generation of quinolones. Regarding the quality control of medicines, a validated microbiological assay for determination of orbifloxacin in pharmaceutical formulations has not as yet been reported. For this purpose, this paper reports the development and validation of a simple, sensitive, accurate and reproducible agar diffusion method to quantify orbifloxacin in tablet formulations. The assay is based on the inhibitory effect of orbifloxacin upon the strain of Staphylococcus aureus ATCC 25923 used as test microorganism. The results were treated statistically by analysis of variance and were found to be linear (r = 0.9992) in the selected range of 16.0–64.0 μg/mL, precise with relative standard deviation (RSD) of repeatability intraday = 2.88%, intermediate precision RSD = 3.33%, and accurate (100.31%). The results demonstrated the validity of the proposed bioassay, which allows reliable orbifloxacin quantitation in pharmaceutical samples and therefore can be used as a useful alternative methodology for the routine quality control of this medicine. PMID:24310597

  4. Antimicrobial susceptibility testing for Helicobacter pylori isolates from Brazilian children and adolescents: comparing agar dilution, E-test, and disk diffusion.

    PubMed

    Ogata, Silvio Kazuo; Gales, Ana Cristina; Kawakami, Elisabete

    2014-01-01

    Antimicrobial susceptibility testing for Helicobacter pylori is increasingly important due to resistance to the most used antimicrobials agents. Only agar dilution method is approved by CLSI, but it is difficult to perform routinely. We evaluated the reliability of E-test and disk diffusion comparing to agar dilution method on Helicobacter pylori antimicrobial susceptibility testing. Susceptibility testing was performed for amoxicillin, clarithromycin, furazolidone, metronidazole and tetracycline using E-test, disk-diffusion and agar dilution method in 77 consecutive Helicobacter pylori strains from dyspeptic children and adolescents. Resistance rates were: amoxicillin - 10.4%, 9% and 68.8%; clarithromycin - 19.5%, 20.8%, 36.3%; metronidazole - 40.2%33.7%, 38.9%, respectively by agar dilution, E-test and disk diffusion method. Furazolidone and tetracycline showed no resistance rates. Metronidazole presented strong correlation to E-test (r = 0.7992, p < 0.0001) and disk diffusion method (r=-0.6962, p < 0.0001). Clarithromycin presented moderate correlation to E-test (r = 0.6369, p < 0.0001) and disk diffusion method (r=-0.5656, p < 0.0001). Amoxicillin presented weak correlation to E-test (r = 0.3565, p = 0.0015) and disk diffusion (r=-0.3565, p = 0.0015). Tetracycline presented weak correlation with E-test (r = 0.2346, p = 0.04) and furazolidone to disk diffusion (r=-0.0288, p = 0.8038). E-test presented better agreement with gold standard. It is an easy and reliable method for Helicobacter pylori susceptibility testing. Disk diffusion method presented high disagreement and high rates of major errors.

  5. In vitro susceptibility of Burkholderia cepacia complex isolates: Comparison of disk diffusion, Etest®, agar dilution, and broth microdilution methods.

    PubMed

    Fehlberg, Lorena Cristina Corrêa; Nicoletti, Adriana Gianinni; Ramos, Ana Carolina; Rodrigues-Costa, Fernanda; de Matos, Adriana Pereira; Girardello, Raquel; Marques, Elizabeth Andrade; Gales, Ana Cristina

    2016-12-01

    Broth microdilution, agar dilution, Etest® and disk diffusion techniques were compared to evaluate the susceptibility profile of 82 Bcc clinical isolates against six antimicrobials as recommended by CLSI. Broth microdilution was considered the "gold standard" method. The regression analysis was applied to determine the essential (EA) and categorical (CA) agreement rates. STX (MIC50, 1 mg/L) was the most potent antimicrobial tested against Bcc isolates. The worst in vitro activity was observed for chloramphenicol (MIC50, 16 mg/L) and ticarcillin-clavulanic acid (MIC50, >256 mg/L). The EA among broth microdilution and agar dilution results was good for the majority of antimicrobial tested. When comparing broth microdilution and Etest®, ceftazidime, SXT and chloramphenicol exhibited EA rates below 90%. SXT showed an excellent CA (100%) when dilution methodologies were compared. However, a low CA rate was found for this agent between dilution and disk diffusion methodologies resulting in unacceptable very major and minor error rates.

  6. Development of a stable isotope dilution assay for tenuazonic acid.

    PubMed

    Asam, Stefan; Liu, Yang; Konitzer, Katharina; Rychlik, Michael

    2011-04-13

    A stable isotope dilution assay (SIDA) for the Alternaria mycotoxin tenuazonic acid was developed. Therefore, [(13)C(6),(15)N]-tenuazonic acid was synthesized from [(13)C(6),(15)N]-isoleucine by Dieckmann intramolecular cyclization after acetoacetylation with diketene. The synthesized [(13)C(6),(15)N]-tenuazonic acid was used as the internal standard for determination of tenuazonic acid in tomato products by liquid chromatography tandem mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine. Method validation revealed a limit of detection of 0.1 μg/kg and a limit of quantitation of 0.3 μg/kg. Recovery was close to 100% in the range of 3-300 μg/kg. Determination of tenuazonic acid in two samples of different tomato ketchups (naturally contaminated) was achieved with a coefficient of variation of 2.3% and 4.7%. Different tomato products (n = 16) were analyzed for their content of tenuazonic acid using the developed SIDA. Values were between 15 and 195 μg/kg (tomato ketchup, n = 9), 363 and 909 μg/kg (tomato paste, n = 2), and 8 and 247 μg/kg (pureed tomatoes and comparable products, n = 5).

  7. A serial dilution microfluidic device for cytotoxicity assays.

    PubMed

    O'Neill, Adrian T; Monteiro-Riviere, Nancy; Walker, Glenn M

    2006-01-01

    A novel microfluidic device is presented which creates a linear serial dilution of two input fluid streams. This platform facilitates higher productivity as a component of a high throughput cytotoxicity testing strategy. A modeling solution is presented to create custom linear dilution schemes. The featured device creates a serial dilution of two solutions in the range of 1:9 through 9:1 across nine discrete dilutions. It has been validated to create a highly linear progression of dilutions with an R2 value of 0.9993. The device functions equivalently over a wide range of flow rates. The standard deviation of dilution values averages 0.76% over six flow rates spanning 0.5 to 16 microl min(-1).

  8. Immobilization of urease from pigeonpea (Cajanus cajan) on agar tablets and its application in urea assay.

    PubMed

    Mulagalapalli, Swati; Kumar, Sandeep; Kalathur, Ravi Charan Reddy; Kayastha, Arvind M

    2007-09-01

    The pigeonpea urease was immobilized on agar, a common gelling substance. The tablet strips were used as moulds to cast agar tablets of uniform shape and size. The time and temperature of solidification of agar was 6 min and 44 degrees C, respectively. The 5 % agar (w/v) and 0.019 mg protein/agar tablet yielded an optimum immobilization of 51.7%. The optimum pH was shifted through 0.2 U (from 7.3 to 7.5) towards basic side upon immobilization. The optimum temperature of soluble and immobilized urease was 30 degrees C and 60 degrees C, respectively, showing the improvement in thermal stability of urease. There was an increase in K m from 3.23 to 5.07 mM after immobilization. The half-lives of soluble and immobilized urease were 21 and 53 days, respectively, at pH 7.3 and 4 degrees C. The urea was estimated in different blood samples with the help of immobilized urease and the results were consistent with those from clinical pathology laboratory through an autoanalyzer (Zydus Co., Rome, Italy).

  9. Chromogenic assay of human coagulation factor VIII: statistical comparison of 2 working dilution procedures.

    PubMed

    Alonso, C; Gonzalez, A; Frutos, G

    2005-08-01

    The effect of 2 different practices for preparation of working dilutions in the chromogenic substrate method for potency assay of factor VIII was evaluated. In this study the potency of several concentrate materials was shown to be statistically equivalent, whether performing the assay with independent or serial working dilutions.

  10. Use of agar diffusion assay to evaluate bactericidal activity of formulations of alkaline salts of fatty acids against bacteria associated with poultry processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of alkaline salts of fatty acids (FA). Wells in agar media seeded with bacteria were filled with FA-potassium hydroxide (KOH) solutions, plates were incubated, and zones of inhibition were measured. The relationship between bacteric...

  11. The agar diffusion scratch assay - A novel method to assess the bioactive and cytotoxic potential of new materials and compounds

    PubMed Central

    Pusnik, Mascha; Imeri, Minire; Deppierraz, Grégoire; Bruinink, Arie; Zinn, Manfred

    2016-01-01

    A profound in vitro evaluation not only of the cytotoxic but also of bioactive potential of a given compound or material is crucial for predicting potential effects in the in vivo situation. However, most of the current methods have weaknesses in either the quantitative or qualitative assessment of cytotoxicity and/or bioactivity of the test compound. Here we describe a novel assay combining the ISO 10993-5 agar diffusion test and the scratch also termed wound healing assay. In contrast to these original tests this assay is able to detect and distinguish between cytotoxic, cell migration modifying and cytotoxic plus cell migration modifying compounds, and this at higher sensitivity and in a quantitative way. PMID:26861591

  12. Design and analysis of serial limiting dilution assays with small sample sizes.

    PubMed

    Macken, C

    1999-01-01

    We study the design of serial limiting dilution assays (SLDAs) for estimation of effector cell frequency in settings that restrict severely the amount of material available for assay, and for which the assumption of a single-hit Poisson model is reasonable. For different designs (that is, dilution factor, number of dilution levels, and number of replicates at each level), we evaluate maximum likelihood and minimum chi-square estimators, using four quantitative criteria: probability of a non-informative assay (PNI), bias, coefficient of variation (CV), and mean squared error (MSE). Our results are exact, not simulation-based, nor approximations. We found that differences between these two estimators were insubstantial by comparison with the effect on the estimators of the experimental design. Bias was severe in small assays, and could lead, in extremely small designs, to overestimation of effector frequency by as much as 100%. These four criteria provide a rigorous basis for determining the most effective apportionment of total effort among replicates and dilution levels. By increasing the dilution factor and favoring the number of replicates over the number of dilution levels, the PNI is reduced while bias, CV and MSE are increased; and vice versa. Our study is easily extended to estimation of the density of biologically active particles per volume. It can also be extended to alternatives to the single-hit Poisson model for a serial limiting dilution assay.

  13. Split-plot designs for robotic serial dilution assays.

    PubMed

    Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

    2011-12-01

    This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs.

  14. Evaluation of a digital dispenser for direct curve dilutions in a vaccine potency assay.

    PubMed

    Roselle, Christopher; Whitehouse, Dana; Follmer, Thy; Ansbro, Fran; Bouaraphan, Silikhone; Guan, Liming; Wang, Sha-Ke; Shank-Retzlaff, Mary; Verch, Thorsten

    2017-03-01

    Dilutions are a common source of analytical error, both in terms of accuracy and precision, and a common source of analyst mistakes. When serial dilutions are used, errors compound, even when employing laboratory automation. Direct point dilutions instead of serial dilutions can reduce error but is often impractical as they require either large diluent volumes or very small sample volumes when performed with traditional liquid handling equipment. We evaluated preparation of dilution curves using a picoliter digital dispenser, the HP, Inc. / TECAN D300 which is capable of accurately delivering picoliter volumes directly into sample wells filled with assay diluent. Dilution linearity and variability of the direct dilutions were similar to or less than those generated with a traditional liquid handler as measured using a fluorophore assay and an ELISA used to measure vaccine potency. Minimum concentrations for detergent in the dispensed sample were identified but no correlation with detergent characteristics was observed. The tolerance to protein in the sample was evaluated as well with up to 5% BSA having no impact on dispense linearity and precision. We found the digital dispenser to reduce automation complexity while maintaining or improving assay performance in addition to facilitating complex plate lay-outs.

  15. Evaluation of an immunochromatographic assay for direct identification of thermostable direct hemolysin-producing Vibrio parahaemolyticus colonies on selective agar plates.

    PubMed

    Kawatsu, Kentaro; Sakata, Junko; Yonekita, Taro; Kumeda, Yuko

    2015-12-01

    We evaluated the utility of an immunochromatographic assay (NH IC TDH) in identifying thermostable direct hemolysin (TDH)-producing Vibrio parahaemolyticus colonies on selective agar plates. The sensitivity of the NH IC TDH assay was 100% (189 samples) and its specificity was 100% (41 samples) compared with the presence of tdh.

  16. A comparison of serial plate agar dilution, Bauer-Kirby disk diffusion, and the Vitek AutoMicrobic system for the determination of susceptibilities of Klebsiella spp., Enterobacter spp., and Pseudomonas aeruginosa to ten antimicrobial agents.

    PubMed

    Fekete, T; Tumah, H; Woodwell, J; Truant, A; Satishchandran, V; Axelrod, P; Kreter, B

    1994-04-01

    The use of rapid, automated technologies for assessment of antimicrobial susceptibility and determination of minimum inhibitory concentrations has been evolving for over a decade. We compared the Vitek AutoMicrobic system and Bauer-Kirby disk diffusion with the National Committee for Clinical Laboratory Standards methods of serial plate agar dilution for qualitative and quantitative susceptibilities of 301 hospital isolates of Klebsiella spp., Enterobacter spp., and Pseudomonas aeruginosa. Antibiotics tested were aztreonam, cefoperazone, ceftazidime, ceftriaxone, ciprofloxacin, gentamicin, imipenem, piperacillin, ticarcillin-clavulanic acid, and tobramycin. Agar dilution and Bauer-Kirby results were more strongly correlated for all three genera than were the results for agar dilution and Vitek. If agar dilution is presumed to be the "gold standard," Bauer-Kirby disk diffusion had only half the number of false susceptibles as did the Vitek. Thus, the Vitek AutoMicrobic system seems to be somewhat less reliable for both qualitative and quantitative measurement of susceptibility and resistance than is Bauer-Kirby disk diffusion.

  17. Development and Validation of a Successful Microbiological Agar Assay for Determination of Ceftriaxone Sodium in Powder for Injectable Solution

    PubMed Central

    Aléssio, Patrícia V.; Salgado, Hérida R. N.

    2012-01-01

    Ceftriaxone sodium is a cephalosporin with broad-spectrum antimicrobial activity and belongs to the third generation of cephalosporins. Regarding the quality control of medicines, a validated microbiological assay for the determination of ceftriaxone sodium in powder for injectable solution has not been reported yet. This paper reports the development and validation of a simple, accurate and reproducible agar diffusion method to quantify ceftriaxone sodium in powder for injectable solution. The assay is based on the inhibitory effect of ceftriaxone sodium on the strain of Bacillus subtilis ATCC 9371 IAL 1027 used as test microorganism. The results were treated statistically by analysis of variance and were found to be linear (r = 0.999) in the selected range of 15.0–60.0 μg/mL, precise with a relative standard deviation (RSD) of repeatability intraday = 1.40%, accurate (100.46%) and robust with a RSD lower than 1.28%. The results demonstrated the validity of the proposed bioassay, which allows reliable ceftriaxone sodium quantitation in pharmaceutical samples and therefore can be used as a useful alternative methodology for the routine quality control of this medicine. PMID:24300294

  18. Correlation of agar dilution and VITEK2 system for detection of resistance to macrolides, lincosamides and pristinamycin among Staphylococcus aureus and Staphylococcus epidermidis: association with genotypes.

    PubMed

    Bémer, P; Juvin, M-E; Corvec, S; Ros, A; Drugeon, H

    2005-08-01

    The performance of the VITEK2 system was evaluated against the agar dilution reference procedure for testing susceptibility of Staphylococcus aureus and Staphylococcus epidermidis to macrolides, lincosamides and streptogramins (MLS). Eighty clinical isolates were selected according to their resistance phenotype and genotype. Results for erythromycin and clindamycin showed 100% agreement; results for lincomycin showed agreement of 78%, with one very major error and 17 minor errors; and results for pristinamycin showed agreement of 46%, with one major error and 43 minor errors. Most isolates resistant to lincomycin and streptogramin A (L SgAr phenotype) were falsely susceptible to lincomycin, and intermediately-resistant or resistant to pristinamycin, with the VITEK2 system. No resistance gene was detected. Most (80%) isolates resistant constitutively to MLS (MLS(r)BC phenotype) were falsely intermediately-resistant to pristinamycin with the VITEK2 system. The erm(A) gene was more common than erm(C) in MLS(r)BC strains. Resistance to pristinamycin alone (SgA SgB PTr phenotype), or associated with either lincomycin resistance (L SgA SgB PTr phenotype) or constitutive MLS(B) resistance (MLS(BC) SgA PTr phenotype), was well-characterised without discordant results. Resistance to pristinamycin was always associated with resistance to streptogramin A, encoded by the vga(A), vga(B), vgb(A) and vat(A) genes in association with the erm(A) or erm(C) genes.

  19. New Insights into Butyrylcholinesterase Activity Assay: Serum Dilution Factor as a Crucial Parameter

    PubMed Central

    Jońca, Joanna; Żuk, Monika; Wasąg, Bartosz; Janaszak-Jasiecka, Anna; Lewandowski, Krzysztof; Wielgomas, Bartosz; Waleron, Krzysztof; Jasiecki, Jacek

    2015-01-01

    Butyrylcholinesterase (BChE) activity assay and inhibitor phenotyping can help to identify patients at risk of prolonged paralysis following the administration of neuromuscular blocking agents. The assay plays an important role in clinical chemistry as a good diagnostic marker for intoxication with pesticides and nerve agents. Furthermore, the assay is also commonly used for in vitro characterization of cholinesterases, their toxins and drugs. There is still lack of standardized procedure for measurement of BChE activity and many laboratories use different substrates at various concentrations. The purpose of this study was to validate the BChE activity assay to determine the best dilution of human serum and the most optimal concentration of substrates and inhibitors. Serum BChE activity was measured using modified Ellman’s method applicable for a microplate reader. We present our experience and new insights into the protocol for high-throughput routine assays of human plasma cholinesterase activities adapted to a microplate reader. During our routine assays used for the determination of BChE activity, we have observed that serum dilution factor influences the results obtained. We show that a 400-fold dilution of serum and 5mM S-butyrylthiocholine iodide can be successfully used for the accurate measurement of BChE activity in human serum. We also discuss usage of various concentrations of dibucaine and fluoride in BChE phenotyping. This study indicates that some factors of such a multicomponent clinical material like serum can influence kinetic parameters of the BChE. The observed inhibitory effect is dependent on serum dilution factor used in the assay. PMID:26444431

  20. Quantitative analysis of cell proliferation by a dye dilution assay: Application to cell lines and cocultures.

    PubMed

    Chung, Soobin; Kim, Seol-Hee; Seo, Yuri; Kim, Sook-Kyung; Lee, Ji Youn

    2017-04-04

    Cell proliferation represents one of the most fundamental processes in biological systems, thus the quantitative analysis of cell proliferation is important in many biological applications such as drug screening, production of biologics, and assessment of cytotoxicity. Conventional proliferation assays mainly quantify cell number based on a calibration curve of a homogeneous cell population, and therefore are not applicable for the analysis of cocultured cells. Moreover, these assays measure cell proliferation indirectly, based on cellular metabolic activity or DNA content. To overcome these shortcomings, a dye dilution assay employing fluorescent cell tracking dyes that are retained within cells was applied and was diluted proportionally by subsequent cell divisions. Here, it was demonstrated that this assay could be implemented to quantitatively analyze the cell proliferation of different types of cell lines, and to concurrently analyze the proliferation of two types of cell lines in coculture by utilizing cell tracking dyes with different spectral characteristics. The mean division time estimated by the dye dilution assay is compared with the population doubling time obtained from conventional methods and values from literature. Additionally, dye transfer between cocultured cells was investigated and it was found that it is a characteristic of the cells rather than a characteristic of the dye. It was suggested that this method can be easily combined with other flow cytometric analyses of cellular properties, providing valuable information on cell status under diverse conditions. © 2017 International Society for Advancement of Cytometry.

  1. Use of agar diffusion assay to measure bactericidal activity of alkaline salts of fatty acids against bacteria associated with poultry processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of alkaline salts of caproic, caprylic, capric, lauric, and myristic acids. A 0.5M concentration of each fatty acid was dissolved in 1.0 M potassium hydroxide (KOH), and pH of the mixtures was adjusted to 10.5 with citric acid. Solu...

  2. VIDAS Salmonella (SLM) assay method EasySLM with ChromID Salmonella (SM2) Agar. Performance Tested Method 020901.

    PubMed

    Johnson, Ronald; Mills, John; Colón-Reveles, Judith

    2009-01-01

    A method modification study was conducted for the VIDAS Salmonella (SLM) assay (AOAC Performance Tested Method 020901) using the EasySLM method to validate a matrix extension for peanut butter. The VIDAS EasySLM method is a simple enrichment procedure compared to traditional Salmonella methods, requiring only pre-enrichment and a single selective enrichment media, Salmonella Xpress 2 (SX2) broth. SX2 replaces the two selective broths in traditional methods and eliminates the M broth transfer, incubation, and subsequent pooling of M broths prior to VIDAS assay. The validation study was conducted under the AOAC Research Institute Emergency Response Validation program. VIDAS SLM was compared to the U.S. Food and Drug Administration's Bacteriological Analytical Manual (FDA-BAM) method for detection of S. enterica ser. Typhimurium in peanut butter. All peanut butter samples were prepared, blind-coded, and shipped to the method developers' laboratory by Q Laboratories. In addition, Q Laboratories performed most probable number and reference method analyses on peanut butter samples. The VIDAS EasySLM ChromID Salmonella (SM2) Agar was previously validated in the Performance Tested Methods program for the detection of Salmonella in roast beef, raw ground pork, turkey, pork sausage, raw chicken breast, dry pet food, whole milk, ice cream, bagged spinach, shrimp (raw, peeled), raw cod, spent irrigation water, pecans, peanut butter, dry pasta, cake mix, ground black pepper, nonfat dry milk, liquid eggs, cantaloupe, and orange juice. In the matrix extension study for peanut butter, the VIDAS EasySLM method was shown to be equivalent to the appropriate reference culture procedure using both buffered peptone water pre-enrichment and the FDA-BAM lactose pre-enrichment in the two-step enrichment method with SX2 media. The current study extends the validation to include peanut butter.

  3. Antimicrobial Susceptibility of Flavobacterium psychrophilum from Chilean Salmon Farms and Their Epidemiological Cut-Off Values Using Agar Dilution and Disk Diffusion Methods

    PubMed Central

    Miranda, Claudio D.; Smith, Peter; Rojas, Rodrigo; Contreras-Lynch, Sergio; Vega, J. M. Alonso

    2016-01-01

    Flavobacterium psychrophilum is the most important bacterial pathogen for freshwater farmed salmonids in Chile. The aims of this study were to determine the susceptibility to antimicrobials used in fish farming of Chilean isolates and to calculate their epidemiological cut-off (COWT) values. A number of 125 Chilean isolates of F. psychrophilum were isolated from reared salmonids presenting clinical symptoms indicative of flavobacteriosis and their identities were confirmed by 16S rRNA polymerase chain reaction. Susceptibility to antibacterials was tested on diluted Mueller-Hinton by using an agar dilution MIC method and a disk diffusion method. The COWT values calculated by Normalized Resistance Interpretation (NRI) analysis allow isolates to be categorized either as wild-type fully susceptible (WT) or as manifesting reduced susceptibility (NWT). When MIC data was used, NRI analysis calculated a COWT of ≤0.125, ≤2, and ≤0.5 μg mL-1 for amoxicillin, florfenicol, and oxytetracycline, respectively. For the quinolones, the COWT were ≤1, ≤0.5, and ≤0.125 μg mL-1 for oxolinic acid, flumequine, and enrofloxacin, respectively. The disk diffusion data sets obtained in this work were extremely diverse and were spread over a wide range. For the quinolones there was a close agreement between the frequencies of NWT isolates calculated using MIC and disk data. For oxolinic acid, flumequine, and enrofloxacin the frequencies were 45, 39, and 38% using MIC data, and 42, 41, and 44%, when disk data were used. There was less agreement with the other antimicrobials, because NWT frequencies obtained using MIC and disk data, respectively, were 24 and 10% for amoxicillin, 8 and 2% for florfenicol, and 70 and 64% for oxytetracycline. Considering that the MIC data was more precise than the disk diffusion data, MIC determination would be the preferred method for susceptibility testing for this species and the NWT frequencies derived from the MIC data sets should be considered

  4. Antimicrobial Susceptibility of Flavobacterium psychrophilum from Chilean Salmon Farms and Their Epidemiological Cut-Off Values Using Agar Dilution and Disk Diffusion Methods.

    PubMed

    Miranda, Claudio D; Smith, Peter; Rojas, Rodrigo; Contreras-Lynch, Sergio; Vega, J M Alonso

    2016-01-01

    Flavobacterium psychrophilum is the most important bacterial pathogen for freshwater farmed salmonids in Chile. The aims of this study were to determine the susceptibility to antimicrobials used in fish farming of Chilean isolates and to calculate their epidemiological cut-off (COWT) values. A number of 125 Chilean isolates of F. psychrophilum were isolated from reared salmonids presenting clinical symptoms indicative of flavobacteriosis and their identities were confirmed by 16S rRNA polymerase chain reaction. Susceptibility to antibacterials was tested on diluted Mueller-Hinton by using an agar dilution MIC method and a disk diffusion method. The COWT values calculated by Normalized Resistance Interpretation (NRI) analysis allow isolates to be categorized either as wild-type fully susceptible (WT) or as manifesting reduced susceptibility (NWT). When MIC data was used, NRI analysis calculated a COWT of ≤0.125, ≤2, and ≤0.5 μg mL(-1) for amoxicillin, florfenicol, and oxytetracycline, respectively. For the quinolones, the COWT were ≤1, ≤0.5, and ≤0.125 μg mL(-1) for oxolinic acid, flumequine, and enrofloxacin, respectively. The disk diffusion data sets obtained in this work were extremely diverse and were spread over a wide range. For the quinolones there was a close agreement between the frequencies of NWT isolates calculated using MIC and disk data. For oxolinic acid, flumequine, and enrofloxacin the frequencies were 45, 39, and 38% using MIC data, and 42, 41, and 44%, when disk data were used. There was less agreement with the other antimicrobials, because NWT frequencies obtained using MIC and disk data, respectively, were 24 and 10% for amoxicillin, 8 and 2% for florfenicol, and 70 and 64% for oxytetracycline. Considering that the MIC data was more precise than the disk diffusion data, MIC determination would be the preferred method for susceptibility testing for this species and the NWT frequencies derived from the MIC data sets should be

  5. Single-dilution enzyme-linked immunosorbent assay for quantification of antigen-specific salmonid antibody

    USGS Publications Warehouse

    Alcorn, S.W.; Pascho, R.J.

    2000-01-01

    An enzyme-linked immunosorbent assay (ELISA) was developed on the basis of testing a single dilution of serum to quantify the level of antibody to the p57 protein of Renibaclerium salmoninarum in sockeye salmon (Oncorhynchus nerka). The levels of antibody were interpolated from a standard curve constructed by relating the optical densities (OD) produced by several dilutions of a high-titer rainbow trout (O. mykiss) antiserum to the p57 protein. The ELISA OD values produced by as many as 36 test sera on each microplate were compared with the standard curve to calculate the antigen-specific antibody activity. Repeated measurements of 36 samples on 3 microplates on each of 6 assay dates indicated that the mean intraassay coefficient of variation (CV) was 6.68% (range, 0-23%) and the mean interassay CV was 8.29% (range, 4-16%). The antibody levels determined for the serum sample from 24 sockeye salmon vaccinated with a recombinant p57 protein generally were correlated with the levels determined by endpoint titration (r2 = 0.936) and with results from another ELISA that was based on extrapolation of antibody levels from a standard curve (r2 = 0.956). The single-dilution antibody ELISA described here increases the number of samples that can be tested on each microplate compared with immunoassays based on analysis of several dilutions of each test serum. It includes controls for interassay standardization and can be used to test fish weighing <3 g.

  6. Statistical analysis of data from dilution assays with censored correlated counts.

    PubMed

    Quiroz, Jorge; Wilson, Jeffrey R; Roychoudhury, Satrajit

    2012-01-01

    Frequently, count data obtained from dilution assays are subject to an upper detection limit, and as such, data obtained from these assays are usually censored. Also, counts from the same subject at different dilution levels are correlated. Ignoring the censoring and the correlation may provide unreliable and misleading results. Therefore, any meaningful data modeling requires that the censoring and the correlation be simultaneously addressed. Such comprehensive approaches of modeling censoring and correlation are not widely used in the analysis of dilution assays data. Traditionally, these data are analyzed using a general linear model on a logarithmic-transformed average count per subject. However, this traditional approach ignores the between-subject variability and risks, providing inconsistent results and unreliable conclusions. In this paper, we propose the use of a censored negative binomial model with normal random effects to analyze such data. This model addresses, in addition to the censoring and the correlation, any overdispersion that may be present in count data. The model is shown to be widely accessible through the use of several modern statistical software.

  7. Evaluation of the ANSR for Salmonella assay for identification of Salmonella spp. from colony picks from selective/differential agar media: first action 2013.14.

    PubMed

    Mozola, Mark; Botimer, Maximilian; Jagadics, Carolyn; Norton, Paul; Caballero, Oscar; Enslin, Nicole; Biswas, Preetha; Rice, Jennifer

    2014-01-01

    A collaborative study was conducted to evaluate performance of the ANSR for Salmonella assay for identification of Salmonella spp. from colony picks taken from selective/differential agar media. The ANSR Salmonella assay is an isothermal nucleic acid amplification test based on the nicking enzyme amplification reaction chemistry. The test can be completed in less than 40 min including sample preparation. A total of 18 laboratories representing industry, government, academic, and commercial testing laboratories participated in the study. Each collaborator tested up to 84 samples, comprised of colony picks of six Salmonella spp. and six non-salmonellae taken from six selective/differential agar media as well as tryptic soy agar. A total of 1441 analyses were performed, 1416 of which gave the correct identification, for overall accuracy of 98.3%. For identification of Salmonella spp., 755 of 756 tests (99.9%) produced the correct result. For identification of non-salmonellae as such, 661 of 685 assays (96.5%) produced the correct result. Of the 18 laboratories, 15 produced data sets with 99-100% accuracy. The majority of false-positive results were clustered in three laboratories; analysis of raw data suggests procedural difficulties in at least two cases, which may explain the atypical data from these collaborators. The ANSR Salmonella assay can be used as a rapid, accurate adjunct or alternative to biochemical testing for identification of presumptive Salmonella spp. isolates.

  8. Dilution

    PubMed Central

    Lavie, Nilli; Torralbo, Ana

    2010-01-01

    Load theory of attention proposes that distractor processing is reduced in tasks with high perceptual load that exhaust attentional capacity within task-relevant processing. In contrast, tasks of low perceptual load leave spare capacity that spills over, resulting in the perception of task-irrelevant, potentially distracting stimuli. Tsal and Benoni (2010) find that distractor response competition effects can be reduced under conditions with a high search set size but low perceptual load (due to a singleton color target). They claim that the usual effect of search set size on distractor processing is not due to attentional load but instead attribute this to lower level visual interference. Here, we propose an account for their findings within load theory. We argue that in tasks of low perceptual load but high set size, an irrelevant distractor competes with the search nontargets for remaining capacity. Thus, distractor processing is reduced under conditions in which the search nontargets receive the spillover of capacity instead of the irrelevant distractor. We report a new experiment testing this prediction. Our new results demonstrate that, when peripheral distractor processing is reduced, it is the search nontargets nearest to the target that are perceived instead. Our findings provide new evidence for the spare capacity spillover hypothesis made by load theory and rule out accounts in terms of lower level visual interference (or mere “dilution”) for cases of reduced distractor processing under low load in displays of high set size. We also discuss additional evidence that discounts the viability of Tsal and Benoni's dilution account as an alternative to perceptual load. PMID:21133554

  9. Assay of tyrosol and hydroxytyrosol in olive oil by tandem mass spectrometry and isotope dilution method.

    PubMed

    Mazzotti, Fabio; Benabdelkamel, Hicham; Di Donna, Leonardo; Maiuolo, Loredana; Napoli, Anna; Sindona, Giovanni

    2012-12-01

    Hydroxytyrosol and tyrosol, the strong antioxidant present in large amount in virgin olive oil have been assayed by LC-MS/MS under MRM condition and isotope dilution method, using d(2)-labelled internal standards obtained by simple synthetic procedures. The assay has been performed under MRM condition monitoring two transitions for each analyte to improve the specificity. This paper deals with a modern approach for assaying the content of this polyphenols in virgin olive oil down to a limit of a few hundreds of parts per billion. Tyrosol and hydroxytyrosol ranged from 10 to 47ppm and from 5 to 25ppm in commercial olive oil, respectively. The accuracy (98-107%) and analytical parameters values confirm the reliability of the proposed approach. The method can be extended to any natural matrices, including mill wastes, after a simple step of sample preparation.

  10. Standardisation and comparison of serial dilution and single dilution enzyme linked immunosorbent assay (ELISA) using different antigenic preparations of the Babesia (Theileria) equi parasite.

    PubMed

    Kumar, Sanjay; Kumar, Yogesh; Malhotra, Dharam V; Dhar, Shruti; Nichani, Anil K

    2003-01-01

    Serial dilution and single dilution enzyme linked immunosorbent assays (ELISA) were standardised and their sensitivity and specificity were compared for serodiagnosis of Babesia equi infection. The antibody titres of 24 donkey sera of known identity were determined separately by serial dilution ELISA using three different B. equi antigens namely whole merozoite (WM), cell membrane (CM) and high speed supernatant (HSS). The ratios of the optical density (OD) of known positive and known negative sera at different serum dilutions were calculated and termed as the positive/negative (P/N) ratio. The coefficients of correlation (r) were calculated between the P/N ratios at different dilutions of sera and the log10 antibody titres of the same sera were ascertained by serial dilution ELISA. The highest value of 'r' was obtained at a serum dilution of 1:200. From log10 antibody titre of sera (y) and their P/N ratio at a dilution of 1:200 (x), regression equations (y = a + bx) were calculated separately for the three antigens. Test sera were diluted to 1:200, their OD were read in duplicate wells and were converted to the P/N ratio. Antibody titres were predicted from the P/N ratio using a regression equation separately for the three antigens. Titres obtained by both ELISAs were not significantly different from each other, thus confirming that single dilution ELISA could be successfully used to replace conventional serial dilution ELISA. The sensitivity, specificity and predictive value of single dilution ELISA was validated statistically using 42 B. equi disease-positive sera and 106 B. equi disease-negative sera. The WM antigen was found to be the most sensitive with a higher predictive value for negative test sera as compared to the CM or HSS antigens. Sera positive for other equine infections including Babesia caballi showed no cross-reaction with the three B. equi antigens in ELISA, thus the test was immunologically specific. Antibody titres of 109 unknown field donkey

  11. A prototype microfluidic platform for miniaturization and automation of serial dilution and dose-response assays.

    PubMed

    Koehler, Jeffrey; Vajjhala, Surekha; Coyne, Courtney; Flynn, Terence; Pezzuto, Marci; Williams, Manda; Levine, Leanna

    2002-11-01

    A novel microfluidic device was designed and developed to miniaturize, multiplex, and automate serial dilution and three-reagent dose-response assays using submicroliter quantities of reagents. This prototype microfluidic device can be used to measure enzyme kinetics and to test a chemical lead's response to a target by fluorescent readout using common plate readers and detection systems. The prototype microfluidic system yielded serial dilution and dose-response assay data comparable to results obtained from manual titrations and reagent additions performed using a microwell plate. Enzyme kinetics were highly reproducible using these devices, although Michaelis-Menten kinetics results differed from those obtained in the microwell plate. In all cases reported here, assays performed on the microfluidic format required lower volumes of reagents compared with the microwell plate. In addition to savings in reagent consumption, the microfluidic devices and bench-top instruments offer additional advantages over conventional solutions, including a small footprint and compatibility with commercially available fluorescence detectors. Future directions for the prototype technology are discussed.

  12. Titration of human-bovine rotavirus reassortants using a tetrazolium-based colorimetric end-point dilution assay.

    PubMed

    DiStefano, D J; Gould, S L; Munshi, S; Robinson, D K

    1995-10-01

    A colorimetric end-point dilution assay was developed for the titration of rotavirus-containing samples that uses commercially available tetrazolium dyes as an indicator of virus infection. This assay offers several advantages over both plaque assays and traditional end-point dilution methods. The latter assays require manual counting of plaques or the scoring of wells for the presence of virus based on observed cytopathic effects. The colorimetric end-point dilution assay enables the scoring of wells based upon absorbance readings alone, thereby eliminating time-consuming and subjective manual screenings. This method also has the potential for automating the analysis of large numbers of samples. Virus titers of human-bovine rotavirus reassortants obtained using this method are comparable to those determined by plaque assay. The scoring of wells based on absorbance readings was also found to agree with manual scoring of cytopathic effects and with the production of viral antigen.

  13. Bias-corrected confidence intervals for the concentration parameter in a dilution assay.

    PubMed

    Wang, J; Basu, S

    1999-03-01

    Interval estimates of the concentration of target entities from a serial dilution assay are usually based on the maximum likelihood estimator. The distribution of the maximum likelihood estimator is skewed to the right and is positively biased. This bias results in interval estimates that either provide inadequate coverage relative to the nominal level or yield excessively long intervals. Confidence intervals based on both log transformation and bias reduction are proposed and are shown through simulations to provide appropriate coverage with shorter widths than the commonly used intervals in a variety of designs. An application to feline AIDS research, which motivated this work, is also presented.

  14. [Renal function and plasma dabigatran level measured at trough by diluted thrombin time assay].

    PubMed

    Martinuzzo, Marta E; Duboscq, Cristina; Viñuales, Estela S; Girardi, Beatriz; Penchasky, Diana; Ceresetto, José; Stemmelin, Germán; Otero, Victoria; Barrera, Luis H; López, Marina S; Otaso, Juan C; Hoyhamburu, José

    2017-01-01

    Dabigatran etexilate (direct thrombin inhibitor) is effective in preventing embolic stroke in patients with atrial fibrillation. It does not require laboratory control, but given the high renal elimination, its measurement in plasma is important in renal failure. The objectives of the study were to verify the analytical quality of the diluted thrombin time assay for measurement of dabigatran plasma concentration (cc), correlate cc with classic coagulation assays, prothrombin time (PT) and activated partial thromboplastin time (APTT), and evaluate them according to the creatinine clearance (CLCr). Forty plasma samples of patients (34 consecutive and 6 suspected of drug accumulation) receiving dabigatran at 150 (n = 19) or 110 (n = 21) mg/12 hours were collected. Blood samples were drawn at 10-14 hours of the last intake. Dabigatran concentration was determined by diluted thrombin time (HemosIl DTI, Instrumentation Laboratory (IL). PT and APTT (IL) were performed on two fotooptical coagulometers, ACL TOP 300 and 500 (IL). DTI presented intra-assay coefficient of variation < 5.4% and inter-assay < 6%, linearity range 0-493 ng/ml. Patients' cc: median 83 (4-945) ng/ml. Individuals with CLCr in the lowest tertile (22.6-46.1 ml/min) showed significantly higher median cc: 308 (49-945), compared to the average 72 (12-190) and highest tertile, 60 (4-118) ng/ml. Correlation between cc and APTT or PT were moderate, r2 = 0.59 and -0.66, p < 0.0001, respectively. DTI test allowed us to quantify plasma dabigatran levels, both in patients with normal or altered renal function, representing a useful tool in clinical situations such as renal failure, pre surgery or emergencies.

  15. Abilities of the mCP Agar method and CRENAME alpha toxin-specific real-time PCR assay to detect Clostridium perfringens spores in drinking water.

    PubMed

    Maheux, Andrée F; Bérubé, Eve; Boudreau, Dominique K; Villéger, Romain; Cantin, Philippe; Boissinot, Maurice; Bissonnette, Luc; Bergeron, Michel G

    2013-12-01

    We first determined the analytical specificity and ubiquity (i.e., the ability to detect all or most strains) of a Clostridium perfringens-specific real-time PCR (rtPCR) assay based on the cpa gene (cpa rtPCR) by using a bacterial strain panel composed of C. perfringens and non-C. perfringens Clostridium strains. All non-C. perfringens Clostridium strains tested negative, whereas all C. perfringens strains tested positive with the cpa rtPCR, for an analytical specificity and ubiquity of 100%. The cpa rtPCR assay was then used to confirm the identity of 116 putative C. perfringens isolates recovered after filtration of water samples and culture on mCP agar. Colonies presenting discordant results between the phenotype on mCP agar and cpa rtPCR were identified by sequencing the 16S rRNA and cpa genes. Four mCP(-)/rtPCR(+) colonies were identified as C. perfringens, whereas 3 mCP(+)/rtPCR(-) colonies were identified as non-C. perfringens. The cpa rtPCR was negative with all 51 non-C. perfringens strains and positive with 64 of 65 C. perfringens strains. Finally, we compared mCP agar and a CRENAME (concentration and recovery of microbial particles, extraction of nucleic acids, and molecular enrichment) procedure plus cpa rtPCR (CRENAME + cpa rtPCR) for their abilities to detect C. perfringens spores in drinking water. CRENAME + cpa rtPCR detected as few as one C. perfringens CFU per 100 ml of drinking water sample in less than 5 h, whereas mCP agar took at least 25 h to deliver results. CRENAME + cpa rtPCR also allows the simultaneous and sensitive detection of Escherichia coli and C. perfringens from the same potable water sample. In itself, it could be used to assess the public health risk posed by drinking water potentially contaminated with pathogens more resistant to disinfection.

  16. Automated Acoustic Dispensing for the Serial Dilution of Peptide Agonists in Potency Determination Assays.

    PubMed

    Naylor, Jacqueline; Rossi, Alessandra; Brankin, Christopher; Hornigold, David C

    2016-11-10

    As with small molecule drug discovery, screening for peptide agonists requires the serial dilution of peptides to produce concentration-response curves. Screening peptides affords an additional layer of complexity as conventional tip-based sample handling methods expose peptides to a large surface area of plasticware, providing an increased opportunity for peptide loss via adsorption. Preventing excessive exposure to plasticware reduces peptide loss via adherence to plastics and thus minimizes inaccuracies in potency prediction, and we have previously described the benefits of non-contact acoustic dispensing for in vitro high-throughput screening of peptide agonists(1). Here we discuss a fully integrated automation solution for non-contact acoustic preparation of peptide serial dilutions in microtiter plates utilizing the example of screening for peptide agonists at the mouse glucagon-like peptide-1 receptor (GLP-1R). Our methods allow for high-throughput cell-based assays to screen for agonists and are easily scalable to support increased sample throughput, or to allow for increased numbers of assay plate copies (e.g., for a panel of more target cell lines).

  17. Designing and Interpreting Limiting Dilution Assays: General Principles and Applications to the Latent Reservoir for Human Immunodeficiency Virus-1

    PubMed Central

    Rosenbloom, Daniel I. S.; Elliott, Oliver; Hill, Alison L.; Henrich, Timothy J.; Siliciano, Janet M.; Siliciano, Robert F.

    2015-01-01

    Limiting dilution assays are widely used in infectious disease research. These assays are crucial for current human immunodeficiency virus (HIV)-1 cure research in particular. In this study, we offer new tools to help investigators design and analyze dilution assays based on their specific research needs. Limiting dilution assays are commonly used to measure the extent of infection, and in the context of HIV they represent an essential tool for studying latency and potential curative strategies. Yet standard assay designs may not discern whether an intervention reduces an already miniscule latent infection. This review addresses challenges arising in this setting and in the general use of dilution assays. We illustrate the major statistical method for estimating frequency of infectious units from assay results, and we offer an online tool for computing this estimate. We recommend a procedure for customizing assay design to achieve desired sensitivity and precision goals, subject to experimental constraints. We consider experiments in which no viral outgrowth is observed and explain how using alternatives to viral outgrowth may make measurement of HIV latency more efficient. Finally, we discuss how biological complications, such as probabilistic growth of small infections, alter interpretations of experimental results. PMID:26478893

  18. Optimization in multidimensional gas chromatography applying quantitative analysis via a stable isotope dilution assay.

    PubMed

    Schmarr, Hans-Georg; Slabizki, Petra; Legrum, Charlotte

    2013-08-01

    Trace level analyses in complex matrices benefit from heart-cut multidimensional gas chromatographic (MDGC) separations and quantification via a stable isotope dilution assay. Minimization of the potential transfer of co-eluting matrix compounds from the first dimension ((1)D) separation into the second dimension separation requests narrow cut-windows. Knowledge about the nature of the isotope effect in the separation of labeled and unlabeled compounds allows choosing conditions resulting in at best a co-elution situation in the (1)D separation. Since the isotope effect strongly depends on the interactions of the analytes with the stationary phase, an appropriate separation column polarity is mandatory for an isotopic co-elution. With 3-alkyl-2-methoxypyrazines and an ionic liquid stationary phase as an example, optimization of the MDGC method is demonstrated and critical aspects of narrow cut-window definition are discussed.

  19. Determination of tenuazonic acid in human urine by means of a stable isotope dilution assay.

    PubMed

    Asam, Stefan; Habler, Katharina; Rychlik, Michael

    2013-05-01

    The content of tenuazonic acid in human urine was determined by a stable isotope dilution assay (SIDA) that was recently developed for the analysis of food commodities and extensively re-validated for urine matrix in this study. Linearity of the response curve was proven between molar ratios n(labeled standard)/n(analyte) of 0.02-100. The limits of detection and determination were 0.2 and 0.6 μg/L, respectively. The mean recovery of the stable isotope dilution assay was 102 ± 3 % in the range between 1.0 and 100 μg/L. Interassay precision was 6.7 % (relative standard deviation of three triplicate analyses of a human urine sample during 3 weeks). The method was applied to two studies dealing with urinary excretion of tenuazonic acid: In the first study, tenuazonic acid was quantified in the 24-h urine of six volunteers from Germany (three female, three male) in a concentration range of 1.3-17.3 μg/L or 2.3-10.3 ng/mg(-1) creatinine, respectively. In the second study, two volunteers (one female, one male) ingested 30 μg tenuazonic acid by consumption of naturally contaminated whole meal sorghum infant cereals and tomato juice, respectively. The urinary excretion of the ingested tenuazonic acid was 54-81 % after 6 h, depending on matrix and volunteer. After 24 h, 87-93 % of the ingested amount of tenuazonic acid was excreted, but the fate of the remaining about 10 % is open. Thus, it is not possible to exclude potential health hazards for the consumer, completely.

  20. Recent developments in stable isotope dilution assays in mycotoxin analysis with special regard to Alternaria toxins.

    PubMed

    Asam, Stefan; Rychlik, Michael

    2015-10-01

    Stable isotope dilution assays (SIDAs) are becoming ever commoner in mycotoxin analysis, and the number of synthesized or commercially available isotopically labelled compounds has greatly increased in the 7 years since our last review dealing with this topic. Thus, this review is conceived as an update for new applications or improvements of SIDAs for compounds discussed earlier, but the main focus is on newly introduced labelled substances and the development of SIDAs for, for example, fusarin C, moniliformin or the enniatins. Mycotoxin research has concentrated on the emerging group of Alternaria toxins in recent years, and a series of SIDAs have been developed, including ones for tenuazonic acid, alternariol, altertoxins and tentoxin that are discussed in detail in this review. Information about synthetic routes, isotopic purity and mass-spectrometric characterization of labelled compounds is given, as well as about the development and validation of SIDAs and their application to foods, feeds or biological samples. As the number of commercially available labelled standards is increasing continuously, a general tendency for the use of analytical methods based on liquid chromatography coupled with mass spectrometry capable of identifying a series of mycotoxins simultaneously ("multimethods") and using one or more labelled internal standards can be observed. An overview of these applications is given, thus demonstrating that SIDAs are increasingly being used in routine analysis.

  1. Odorant Screening and Quantitation of Thiols in Carmenere Red Wine by Gas Chromatography-Olfactometry and Stable Isotope Dilution Assays.

    PubMed

    Pavez, Carolina; Agosin, Eduardo; Steinhaus, Martin

    2016-05-04

    The sensory impact of thiols in Vitis vinifera 'Carmenere' red wines was evaluated. For this purpose, aroma extract dilution analysis was applied to the thiols isolated from a Carmenere red wine by affinity chromatography with a mercurated agarose gel. Results revealed the presence of four odorants, identified as 2-furanylmethanethiol, 3-sulfanylhexyl acetate, 3-sulfanyl-1-hexanol, and 2-methyl-3-sulfanyl-1-butanol, with the latter being described here for the first time in Carmenere red wines. Quantitation of the four thiols in the Carmenere wine screened by aroma extract dilution analysis and in three additional Carmenere wines by stable isotope dilution assays resulted in concentrations above the respective orthonasal odor detection threshold values. Triangle tests applied to wine model solutions with and without the addition of the four thiols showed significant differences, thus suggesting that the compounds do have the potential to influence the overall aroma of red wine.

  2. Stable isotope dilution assays of alternariol and alternariol monomethyl ether in beverages.

    PubMed

    Asam, Stefan; Konitzer, Katharina; Schieberle, Peter; Rychlik, Michael

    2009-06-24

    Stable isotope dilution assays (SIDAs) for the determination of the most important mycotoxins of the black mold Alternaria, namely, alternariol and alternariol monomethyl ether, have been developed. For this purpose, deuterated alternariol and alternariol methyl ether were synthesized by palladium catalyzed protium-deuterium exchange from the unlabeled toxins. Reaction conditions were chosen in such a manner that the formation of the [(2)H(4)]-isotopologues was favored. The synthesized products were characterized by LC-MS, NMR, and UV-spectroscopy. On the basis of the use of [(2)H(4)]-alternariol and [(2)H(4)]-alternariol methyl ether as internal standards, SIDAs were developed and applied to the determination of alternariol and alternariol methyl ether in beverages using LC-MS/MS. Method validation revealed a high sensitivity, i.e., low limits of detection (alternariol, 0.03 microg/kg; alternariol methyl ether, 0.01 microg/kg) and limits of quantitation (alternariol, 0.09 microg/kg; alternariol methyl ether, 0.03 microg/kg), respectively. Recovery from spiked apple juice was 100.5 +/- 3.4% for alternariol (range 0.1-1 microg/kg) and 107.3 +/- 1.6% for alternariol methyl ether (range 0.05-0.5 microg/kg). Interassay precision (expressed as coefficient of variation, CEV) for alternariol was 4.0% (7.82 +/- 0.31 microg/kg; vegetable juice, naturally contaminated) and 4.6% (1.04 +/- 0.05 microg/kg; grape juice, naturally contaminated). For alternariol methyl ether, a CEV of 2.3% (0.79 +/- 0.02 microg/kg; vegetable juice, naturally contaminated) was obtained. Analysis of fruit juices showed low contamination with alternariol and alternariol methyl ether in general, but higher values of both toxins were found in wine and vegetable juices. The values for alternariol were higher than those for alternariol methyl ether in nearly any case. However, the developed SIDA has proven to be optimally suited for further studies on alternariol and alternariol methyl ether content in

  3. Quantitation of odor-active compounds in rye flour and rye sourdough using stable isotope dilution assays.

    PubMed

    Kirchhoff, Eva; Schieberle, Peter

    2002-09-11

    Application of the aroma extract dilution analysis on a flavor distillate prepared from freshly ground rye flour (type 1150) revealed 1-octen-3-one (mushroom-like), methional (cooked potato), and (E)-2-nonenal (fatty, green) with the highest flavor dilution (FD) factors among the 26 odor-active volatiles identified. Quantitative measurements performed by stable isotope dilution assays and a comparison to the odor thresholds of selected odorants in starch suggested methional, (E)-2-nonenal, and hexanal as contributors to the flour aroma, because their concentrations exceeded their odor thresholds by factors >100. Application of the same approach on a rye sourdough prepared from the same batch of flour revealed 3-methylbutanal, vanillin, 3-methylbutanoic acid, methional, (E,E)-2,4-decadienal, 2,3-butanedione, and acetic acid as important odorants; their concentrations exceeded their odor thresholds in water and starch by factors >100. A comparison of the concentrations of 20 odorants in rye flour and the sourdough made therefrom indicated that flour, besides the fermentation process, is an important source of aroma compounds in dough. However, 3-methylbutanol, acetic acid, and 2,3-butanedione were much increased during fermentation, whereas (E,E)-2,4-decadienal and 2-methylbutanal were decreased. Similar results were obtained for five different flours and sourdoughs, respectively, although the amounts of some odorants in the flour and the sourdough differed significantly within batches.

  4. Dye dilution proliferation assay: application of the DDPA to identify tumor-specific T cell precursor frequencies in clinical trials.

    PubMed

    Schwaab, Thomas; Fisher, Jan L; Meehan, Kenneth R; Fadul, Camilo E; Givan, Alice L; Ernstoff, Marc S

    2007-01-01

    A better understanding of immune effector and regulatory pathways has led to innovative, and complex, immunotherapy strategies. CD8(+) cytolytic T lymphocytes (CTL) provide one common pathway of tumor cell destruction. The peripheral blood CTL compartment typically comprises a minority of anti-tumor CD8(+) lymphocytes and the determination of their number during clinical trials is the focus of various laboratory methods. We have monitored tumor specific CD8(+) as well as CD4(+) lymphocyte precursor frequencies in the peripheral blood using a Dye Dilution Proliferation Assay (DDPA). We summarize our experience applying DDPA in a multi-parameter, antigen-specific assay, detailing some of its complexities and advantages. We provide examples of our clinical trial results showing tumor-specific CD8(+) and CD4(+) precursor frequency (PF) data in patients being treated on novel immunotherapy trials.

  5. Parkinson-dementia complex and development of a new stable isotope dilution assay for BMAA detection in tissue.

    PubMed

    Snyder, Laura R; Cruz-Aguado, Reyniel; Sadilek, Martin; Galasko, Douglas; Shaw, Christopher A; Montine, Thomas J

    2009-10-15

    Beta-methylamino-L-alanine (BMAA) has been proposed as a global contributor to neurodegenerative diseases, including Parkinson-dementia complex (PDC) of Guam and Alzheimer's disease (AD). The literature on the effects of BMAA is conflicting with some but not all in vitro data supporting a neurotoxic action, and experimental animal data failing to replicate the pattern of neurodegeneration of these human diseases, even at very high exposures. Recently, BMAA has been reported in human brain from individuals afflicted with PDC or AD. Some of the BMAA in human tissue reportedly is freely extractable (free) while some is protein-associated and liberated by techniques that hydrolyze the peptide bond. The latter is especially intriguing since BMAA is a non-proteinogenic amino acid that has no known tRNA. We attempted to replicate these findings with techniques similar to those used by others; despite more than adequate sensitivity, we were unable to detect free BMAA. Recently, using a novel stable isotope dilution assay, we again were unable to detect free or protein-associated BMAA in human cerebrum. Here we review the development of our new assay for tissue detection of BMAA and show that we are able to detect free BMAA in liver but not cerebrum, nor do we detect any protein-associated BMAA in mice fed this amino acid. These studies demonstrate the importance of a sensitive and specific assay for tissue BMAA and seriously challenge the proposal that BMAA is accumulating in human brain.

  6. Parkinson-dementia complex and development of a new stable isotope dilution assay for BMAA detection in tissue

    SciTech Connect

    Snyder, Laura R.; Cruz-Aguado, Reyniel; Sadilek, Martin; Galasko, Douglas; Shaw, Christopher A.; Montine, Thomas J.

    2009-10-15

    {beta}-Methylamino-L-alanine (BMAA) has been proposed as a global contributor to neurodegenerative diseases, including Parkinson-dementia complex (PDC) of Guam and Alzheimer's disease (AD). The literature on the effects of BMAA is conflicting with some but not all in vitro data supporting a neurotoxic action, and experimental animal data failing to replicate the pattern of neurodegeneration of these human diseases, even at very high exposures. Recently, BMAA has been reported in human brain from individuals afflicted with PDC or AD. Some of the BMAA in human tissue reportedly is freely extractable (free) while some is protein-associated and liberated by techniques that hydrolyze the peptide bond. The latter is especially intriguing since BMAA is a non-proteinogenic amino acid that has no known tRNA. We attempted to replicate these findings with techniques similar to those used by others; despite more than adequate sensitivity, we were unable to detect free BMAA. Recently, using a novel stable isotope dilution assay, we again were unable to detect free or protein-associated BMAA in human cerebrum. Here we review the development of our new assay for tissue detection of BMAA and show that we are able to detect free BMAA in liver but not cerebrum, nor do we detect any protein-associated BMAA in mice fed this amino acid. These studies demonstrate the importance of a sensitive and specific assay for tissue BMAA and seriously challenge the proposal that BMAA is accumulating in human brain.

  7. Chemical Synthesis of Deoxynivalenol-3-β-d-[(13)C₆]-glucoside and Application in Stable Isotope Dilution Assays.

    PubMed

    Habler, Katharina; Frank, Oliver; Rychlik, Michael

    2016-06-27

    Modified mycotoxins have been gaining importance in recent years and present a certain challenge in LC-MS/MS analysis. Due to the previous lack of a labeled isotopologue of the modified mycotoxin deoxynivalenol-3-glucoside, in our study we synthesized the first (13)C-labeled internal standard. Therefore, we used the Königs-Knorr method to synthesize deoxynivalenol-3-β-d-[(13)C₆]-glucoside originated from unlabeled deoxynivalenol and [(13)C₆]-labeled glucose. Using the synthesized isotopically-labeled standard deoxynivalenol-3-β-d-[(13)C₆]-glucoside and the purchased labeled standard [(13)C15]-deoxynivalenol, a stable isotope dilution LC-MS/MS method was firstly developed for deoxynivalenol-3-glucoside and deoxynivalenol in beer. The preparation and purification of beer samples was based on a solid phase extraction. The validation data of the newly developed method gave satisfying results. Intra- and interday precision studies revealed relative standard deviations below 0.5% and 7%, respectively. The recoveries ranged for both analytes between 97% and 112%. The stable isotope dilution assay was applied to various beer samples from four different countries. In summary, deoxynivalenol-3-glucoside and deoxynivalenol mostly appeared together in varying molar ratios but were quantified in rather low contents in the investigated beers.

  8. An interlaboratory study on efficient detection of Shiga toxin-producing Escherichia coli O26, O103, O111, O121, O145, and O157 in food using real-time PCR assay and chromogenic agar.

    PubMed

    Hara-Kudo, Yukiko; Konishi, Noriko; Ohtsuka, Kayoko; Iwabuchi, Kaori; Kikuchi, Rie; Isobe, Junko; Yamazaki, Takumiko; Suzuki, Fumie; Nagai, Yuhki; Yamada, Hiroko; Tanouchi, Atsuko; Mori, Tetsuya; Nakagawa, Hiroshi; Ueda, Yasufumi; Terajima, Jun

    2016-08-02

    To establish an efficient detection method for Shiga toxin (Stx)-producing Escherichia coli (STEC) O26, O103, O111, O121, O145, and O157 in food, an interlaboratory study using all the serogroups of detection targets was firstly conducted. We employed a series of tests including enrichment, real-time PCR assays, and concentration by immunomagnetic separation, followed by plating onto selective agar media (IMS-plating methods). This study was particularly focused on the efficiencies of real-time PCR assays in detecting stx and O-antigen genes of the six serogroups and of IMS-plating methods onto selective agar media including chromogenic agar. Ground beef and radish sprouts samples were inoculated with the six STEC serogroups either at 4-6CFU/25g (low levels) or at 22-29CFU/25g (high levels). The sensitivity of stx detection in ground beef at both levels of inoculation with all six STEC serogroups was 100%. The sensitivity of stx detection was also 100% in radish sprouts at high levels of inoculation with all six STEC serogroups, and 66.7%-91.7% at low levels of inoculation. The sensitivity of detection of O-antigen genes was 100% in both ground beef and radish sprouts at high inoculation levels, while at low inoculation levels, it was 95.8%-100% in ground beef and 66.7%-91.7% in radish sprouts. The sensitivity of detection with IMS-plating was either the same or lower than those of the real-time PCR assays targeting stx and O-antigen genes. The relationship between the results of IMS-plating methods and Ct values of real-time PCR assays were firstly analyzed in detail. Ct values in most samples that tested negative in the IMS-plating method were higher than the maximum Ct values in samples that tested positive in the IMS-plating method. This study indicates that all six STEC serogroups in food contaminated with more than 29CFU/25g were detected by real-time PCR assays targeting stx and O-antigen genes and IMS-plating onto selective agar media. Therefore, screening

  9. Quality evaluation of olive oil by statistical analysis of multicomponent stable isotope dilution assay data of aroma active compounds.

    PubMed

    Dierkes, Georg; Bongartz, Annette; Guth, Helmut; Hayen, Heiko

    2012-01-11

    An instrumental method for the evaluation of olive oil quality was developed. Twenty-one relevant aroma active compounds were quantified in 95 olive oil samples of different quality by headspace solid phase microextraction (HS-SPME) and dynamic headspace coupled to GC-MS. On the basis of these stable isotope dilution assay results, statistical evaluation by partial least-squares discriminant analysis (PLS-DA) was performed. Important variables were the odor activity values of ethyl isobutanoate, ethyl 2-methylbutanoate, 3-methylbutanol, butyric acid, E,E-2,4-decadienal, hexanoic acid, guaiacol, 2-phenylethanol, and the sum of the odor activity values of Z-3-hexenal, E-2-hexenal, Z-3-hexenyl acetate, and Z-3-hexenol. Classification performed with these variables predicted 88% of the olive oils' quality correctly. Additionally, the aroma compounds, which are characteristic for some off-flavors, were dissolved in refined plant oil. Sensory evaluation of these models demonstrated that the off-flavors rancid, fusty, and vinegary could be successfully simulated by a limited number of odorants.

  10. Quantitation of 5-Methyltetrahydrofolic Acid in Dried Blood Spots and Dried Plasma Spots by Stable Isotope Dilution Assays

    PubMed Central

    Kopp, Markus; Rychlik, Michael

    2015-01-01

    Because of minimal data available on folate analysis in dried matrix spots (DMSs), we combined the advantages of stable isotope dilution assays followed by LC-MS/MS analysis with DMS sampling to develop a reliable method for the quantitation of plasma 5-methyltetrahydrofolic acid in dried blood spots (DBSs) and dried plasma spots (DPSs) as well as for the quantitation of whole blood 5-methyltetrahydrofolic acid in DBSs. We focused on two diagnostically conclusive parameters exhibited by the plasma and whole blood 5-methyltetrahydrofolic acid levels that reflect both temporary and long-term folate status. The method is performed using the [2H4]-labeled isotopologue of the vitamin as the internal standard, and three steps are required for the extraction procedure. Elution of the punched out matrix spots was performed using stabilization buffer including Triton X-100 in a standardized ultrasonication treatment followed by enzymatic digestion (whole blood only) and solid-phase extraction with SAX cartridges. This method is sensitive enough to quantify 27 nmol/L whole blood 5-methyltetrahydrofolic acid in DBSs and 6.3 and 4.4 nmol/L plasma 5-methyltetrahydrofolic acid in DBSs and DPSs, respectively. The unprecedented accurate quantification of plasma 5-methyltetrahydrofolic acid in DBSs was achieved by thermal treatment prior to ultrasonication, inhibiting plasma conjugase activity. Mass screenings are more feasible and easier to facilitate for this method in terms of sample collection and storage compared with conventional clinical sampling for the assessment of folate status. PMID:26605791

  11. Quantitation of 5-Methyltetrahydrofolic Acid in Dried Blood Spots and Dried Plasma Spots by Stable Isotope Dilution Assays.

    PubMed

    Kopp, Markus; Rychlik, Michael

    2015-01-01

    Because of minimal data available on folate analysis in dried matrix spots (DMSs), we combined the advantages of stable isotope dilution assays followed by LC-MS/MS analysis with DMS sampling to develop a reliable method for the quantitation of plasma 5-methyltetrahydrofolic acid in dried blood spots (DBSs) and dried plasma spots (DPSs) as well as for the quantitation of whole blood 5-methyltetrahydrofolic acid in DBSs. We focused on two diagnostically conclusive parameters exhibited by the plasma and whole blood 5-methyltetrahydrofolic acid levels that reflect both temporary and long-term folate status. The method is performed using the [2H4]-labeled isotopologue of the vitamin as the internal standard, and three steps are required for the extraction procedure. Elution of the punched out matrix spots was performed using stabilization buffer including Triton X-100 in a standardized ultrasonication treatment followed by enzymatic digestion (whole blood only) and solid-phase extraction with SAX cartridges. This method is sensitive enough to quantify 27 nmol/L whole blood 5-methyltetrahydrofolic acid in DBSs and 6.3 and 4.4 nmol/L plasma 5-methyltetrahydrofolic acid in DBSs and DPSs, respectively. The unprecedented accurate quantification of plasma 5-methyltetrahydrofolic acid in DBSs was achieved by thermal treatment prior to ultrasonication, inhibiting plasma conjugase activity. Mass screenings are more feasible and easier to facilitate for this method in terms of sample collection and storage compared with conventional clinical sampling for the assessment of folate status.

  12. Quantitation of Gingerols in Human Plasma by Newly Developed Stable Isotope Dilution Assays and Assessment of Their Immunomodulatory Potential.

    PubMed

    Schoenknecht, Carola; Andersen, Gaby; Schmidts, Ines; Schieberle, Peter

    2016-03-23

    In a pilot study with two volunteers, the main pungent and bioactive ginger (Zingiber officinale Roscoe) compounds, the gingerols, were quantitated in human plasma after ginger tea consumption using a newly established HPLC-MS/MS(ESI) method on the basis of stable isotope dilution assays. Limits of quantitation for [6]-, [8]-, and [10]-gingerols were determined as 7.6, 3.1, and 4.0 nmol/L, respectively. The highest plasma concentrations of [6]-, [8]-, and [10]-gingerols (42.0, 5.3, and 4.8 nmol/L, respectively) were reached 30-60 min after ginger tea intake. Incubation of activated human T lymphocytes with gingerols increased the intracellular Ca(2+) concentration as well as the IFN-γ secretion by about 20-30%. This gingerol-induced increase of IFN-γ secretion could be blocked by the specific TRPV1 antagonist SB-366791. The results of the present study point to an interaction of gingerols with TRPV1 in activated T lymphocytes leading to an augmentation of IFN-γ secretion.

  13. Content of the Alternaria mycotoxin tenuazonic acid in food commodities determined by a stable isotope dilution assay.

    PubMed

    Asam, Stefan; Lichtenegger, Martina; Liu, Yang; Rychlik, Michael

    2012-02-01

    The Alternaria mycotoxin tenuazonic acid (TA) was quantified in fruit juices (n = 50), cereals (n = 12) and spices (n = 38) using a recently developed stable isotope dilution assay (SIDA). [(13) C6,(15) N]-TA was used as the internal standard. Method validation revealed low limits of detection (LODs) of 0.15 μg/kg (fruit juices), 1.0 μg/kg (cereals) and 17 μg/kg (spices). The respective limits of quantitation were about three times higher. Recovery was about 100% for all matrices. The precision (relative standard deviation of replicate analyses of naturally contaminated samples) was 4.2% (grape juice; 1.7 μg/kg), 3.5% (whole wheat flour; 36 μg/kg) and 0.9% (curry powder; 215 μg/kg). The median content of TA in the analyzed samples was 1.8 μg/kg (fruit juices), 16 μg/kg (cereals) and 500 μg/kg (spices). Positive samples amounted to 86% (fruit juices), 92% (cereals) and 87% (spices).

  14. Methicillin-Resistant Staphylococcus aureus (MRSA) Detection: Comparison of Two Molecular Methods (IDI-MRSA PCR Assay and GenoType MRSA Direct PCR Assay) with Three Selective MRSA Agars (MRSA ID, MRSASelect, and CHROMagar MRSA) for Use with Infection-Control Swabs▿

    PubMed Central

    van Hal, S. J.; Stark, D.; Lockwood, B.; Marriott, D.; Harkness, J.

    2007-01-01

    Methicillin-resistant Staphylococcus aureus (MRSA) is an increasing problem. Rapid detection of MRSA-colonized patients has the potential to limit spread of the organism. We evaluated the sensitivities and specificities of MRSA detection by two molecular methods (IDI-MRSA PCR assay and GenoType MRSA Direct PCR assay) and three selective MRSA agars (MRSA ID, MRSASelect, and CHROMagar MRSA), using 205 (101 nasal, 52 groin, and 52 axillary samples) samples from consecutive known MRSA-infected and/or -colonized patients. All detection methods had higher MRSA detection rates for nasal swabs than for axillary and groin swabs. Detection of MRSA by IDI-MRSA was the most sensitive method, independent of the site (94% for nasal samples, 80% for nonnasal samples, and 90% overall). The sensitivities of the GenoType MRSA Direct assay and the MRSA ID, MRSASelect, and CHROMagar MRSA agars with nasal swabs were 70%, 72%, 68%, and 75%, respectively. All detection methods had high specificities (95 to 99%), independent of the swab site. Extended incubation for a further 24 h with selective MRSA agars increased the detection of MRSA, with a corresponding decline in specificity secondary to a significant increase in false-positive results. There was a noticeable difference in test performance of the GenoType MRSA Direct assay in detection of MRSA (28/38 samples [74%]) compared with detection of nonmultiresistant MRSA (17/31 samples [55%]) (susceptible to two or more non-β-lactam antibiotics). This was not observed with selective MRSA agar plates or IDI-MRSA. Although it is more expensive, in addition to rapid turnaround times of 2 to 4 h, IDI-MRSA offers greater detection of MRSA colonization, independent of the swab site, than do conventional selective agars and GenoType MRSA Direct. PMID:17537949

  15. A comparison of different sample matrices for evaluating functional sensitivity, imprecision and dilution linearity of the Abbott ARCHITECT i2000 TSH assay.

    PubMed

    Quinn, Frank A; Scopp, Richard; Lach, Agnes; Drake, Christopher; Mo, May; Albright, John; Trimpe, Kevin

    2002-07-01

    Important performance characteristics for any thyroid-stimulating hormone (TSH) assay include low-end sensitivity, precision across a wide dynamic range, and linear specimen dilution. Laboratories often characterize the performance of their TSH assay using many different sample matrices (e.g. native human serum, synthetic buffer, processed human serum, etc.). However, this can lead to possible confusion as the relationships between sample matrix and assay performance are often poorly understood. The purpose of our study was to evaluate the performance of the ARCHITECT i2000 TSH assay using a variety of different sample matrices. Functional sensitivity was found to be essentially equivalent in both hyperthyroid patient sera (0.0035 microIU/ml) and TSH affinity-stripped (0.0038 microIU/ml) sample matrices. Assay imprecision was also independent of sample matrix, with total imprecision < or = 5.3% for both synthetic buffer and serum matrices. Similarly, specimens were found to dilute linearly over a wide range in both serum and synthetic buffer matrices. We conclude that the i2000 TSH assay measures TSH similarly in a variety of sample matrices. This is an important design feature for this immunoassay which provides assurance that analytical performance assessed with matrices other than unprocessed human serum are representative of assay performance seen with patient specimens.

  16. Quantification of 1,8-cineole and of its metabolites in humans using stable isotope dilution assays.

    PubMed

    Horst, Kathie; Rychlik, Michael

    2010-10-01

    The metabolism of 1,8-cineole after ingestion of sage tea was studied. After application of the tea, the metabolites 2-hydroxy-1,8-cineole, 3-hydroxy-1,8-cineole, 9-hydroxy-1,8-cineole and, for the first time in humans, 7-hydroxy-1,8-cineole were identified in plasma and urine of one volunteer. For quantitation of these metabolites and the parent compound, stable isotope dilution assays were developed after synthesis of [(2)H(3)]-1,8-cineole, [9/10-(2)H(3)]-2-hydroxy-1,8-cineole and [(13)C,(2)H(2)]-9-hydroxy-1,8-cineole as internal standards. Using these standards, we quantified 1,8-cineole by solid phase microextraction GC-MS and the hydroxyl-1,8-cineoles by LC-MS/MS after deconjugation in blood and urine of the volunteer. After consumption of 1.02 mg 1,8-cineole (19 μg/kg bw), the hydroxycineoles along with their parent compound were detectable in the blood plasma of the volunteer under study after liberation from their glucuronides with 2-hydroxycineole being the predominant metabolite at a maximum plasma concentration of 86 nmol/L followed by the 9-hydroxy isomer at a maximum plasma concentration of 33 nmol/L. The parent compound 1,8-cineole showed a low maximum plasma concentration of 19 nmol/L. In urine, 2-hydroxycineole also showed highest contents followed by its 9-isomer. Summing up the urinary excretion over 10 h, 2-hydroxycineole, the 9-isomer, the 3-isomer and the 7-isomer accounted for 20.9, 17.2, 10.6 and 3.8% of the cineole dose, respectively.

  17. Folate bioavailability from foods rich in folates assessed in a short term human study using stable isotope dilution assays.

    PubMed

    Mönch, Sabine; Netzel, Michael; Netzel, Gabriele; Ott, Undine; Frank, Thomas; Rychlik, Michael

    2015-01-01

    Different sources of folate may have different bioavailability and hence may impact the standard definition of folate equivalents. In order to examine this, a short term human study was undertaken to evaluate the relative native folate bioavailabilities from spinach, Camembert cheese and wheat germs compared to pteroylmonoglutamic acid as the reference dose. The study had a single-centre, randomised, four-treatment, four-period, four-sequence, cross-over design, i.e. the four (food) items to be tested (referred to as treatments) were administered in sequences according to the Latin square, so that each experimental treatment occurred only once within each sequence and once within each study period. Each of the 24 subjects received the four experimental items separated by a 14-day equilibrium phase and received a pteroylmonoglutamic acid supplement for 14 days before the first testing and between the testings for saturation of body pools. Folates in test foods, plasma and urine samples were determined by stable isotope dilution assays, and in urine and plasma, the concentrations of 5-methyltetrahydrofolate were evaluated. Standard non-compartmental methods were applied to determine the biokinetic parameters C(max), t(max) and AUC from baseline corrected 5-methyltetrahydrofolate concentrations within the interval from 0 to 12 hours. The variability of AUC and C(max) was moderate for spinach and oral solution of pteroylmonoglutamic acid but high for Camembert cheese and very high for wheat germs. The median t(max) was lowest for spinach, though t(max) showed a high variability among all treatments. When comparing the ratio estimates of AUC and C(max) for the different test foods, highest bioavailability was found for spinach followed by that for wheat germs and Camembert cheese. The results underline the dependence of folate bioavailability on the type of food ingested. Therefore, the general assumption of 50% bioavailability as the rationale behind the definition of

  18. A novel method for the quantitation of gingerol glucuronides in human plasma or urine based on stable isotope dilution assays.

    PubMed

    Schoenknecht, Carola; Andersen, Gaby; Schieberle, Peter

    2016-11-15

    The bio-active compounds of ginger (Zingiber officinale Roscoe), the gingerols, are gaining considerable attention due to their numerous beneficial health effects. In order to elucidate the physiological relevance of the ascribed effects their bioavailability has to be determined taking their metabolization into account. To quantitate in vivo generated [6]-, [8]- and [10]-gingerol glucuronides in human plasma and urine after ginger tea consumption, a simultaneous and direct liquid chromatography-tandem mass spectrometry method based on stable isotope dilution assays was established and validated. The respective references as well as the isotopically labeled substances were synthesized and characterized by mass spectrometry and NMR. Selective isolation of gingerol glucuronides from human plasma and urine by a mixed-phase anion-exchange SPE method led to recovery rates between 80.8 and 98.2%. LC-MS/MS analyses in selected reaction monitoring modus enabled a highly sensitive quantitation of gingerol glucuronides with LoQs between 3.9-9.8nmol/L in plasma and 39.3-161.1nmol/L in urine. The method precision in plasma and urine varied in the range±15%, whereas the intra-day accuracy in plasma and urine showed values between 78 and 122%. The developed method was then applied to a pilot study in which two volunteers consumed one liter ginger tea. Pharmacokinetic parameters like the maximum concentration (cmax), the time to reach cmax (tmax), area under the curve (AUC), elimination rate constant (kel) and elimination half-life (t1/2) were calculated from the concentration-time curve of each gingerol glucuronide. The obtained results will enable more detailed investigation of gingerol glucuronides as bioactives in their physiologically relevant concentrations.

  19. Production of pseudorabies virus recombinant glycoprotein B and its use in an agar gel immunodiffusion (AGID) test for detection of antibodies with sensitivity and specificity equal to the virus neutralization assay.

    PubMed

    Serena, María Soledad; Geisler, Christoph; Metz, Germán Ernesto; Mórtola, Eduardo Carlos; Echeverría, María Gabriela

    2016-04-01

    Pseudorabies virus (PrV) causes Aujeszky's disease (AD), which affects mainly swine, but also cattle, sheep, and wild animals, resulting in substantial economic losses due to animal mortality and lost productivity worldwide. To combat PrV, eradication programs using PrV strains lacking the gene encoding glycoprotein E (gE) are ongoing in several countries. These eradication programs have generated a currently unmet demand for affordable, easy-to-use, and sensitive tests that can detect PrV infection in pigs infected with either wild-type virus or vaccine strain (gE-deleted) virus. To meet this demand, we used the baculovirus-insect cell system to produce recombinant glycoprotein B (gB) as antigen for an immune assay. The high GC-content (70% average) of the gB gene from the Argentinian PrV CL15 strain necessitated the use of betaine as a PCR enhancer to amplify the extracellular domain. Recombinant gB was expressed at high levels and reacted strongly with sera from PrV infected pigs. We used the recombinant gB to develop an agar gel immunodiffusion (AGID) test for detection of PrV antibodies. Compared to the gold standard virus neutralization (VN) assay, the AGID sensitivity and specificity were 95% and 96.6% respectively. Thus, recombinant gB produced in the baculovirus-insect cell system is a viable source of antigen for the detection of PrV antibodies in AGID tests. Considering its relatively lower cost, simplicity of use and result interpretation, our AGID is a valuable alternative tool to the VN assay.

  20. Determination of key aroma compounds in the crumb of a three-stage sourdough rye bread by stable isotope dilution assays and sensory studies.

    PubMed

    Kirchhoff, E; Schieberle, P

    2001-09-01

    An investigation of the volatile fraction of a freshly prepared sourdough rye bread crumb by means of the aroma extract dilution analysis (AEDA), followed by identification experiments, revealed 22 flavor compounds in the flavor dilution (FD) factor range of 128 to 2048. Quantitations performed by stable isotope dilution assays (SIDA) and a calculation of odor activity values (OAV; ratio of concentration to odor threshold) revealed the following as contributors to the overall crumb flavor: 3-methylbutanal (malty), (E)-2-nonenal (green, fatty), (E,E)-2,4-decadienal (fatty, waxy), hexanal (green), acetic acid (sour, pungent), phenylacetaldehyde (honey-like), methional (boiled potato-like), vanillin (vanilla-like), 2,3-butandione (buttery), 3-hydroxy-4,5-dimethyl-2(5H)-furanone (spicy), and 2- and 3-methylbutanoic acid (sweaty). Using either citrate buffer, starch, or deodorized crumb as model matrixes, the typical malty and sour rye bread crumb flavor was reproduced by adding a mixture of 20 reference odorants in the "natural" concentrations as quantitatively determined in the fresh crumb.

  1. Quantification of cyclic dipeptides from cultures of Lactobacillus brevis R2Δ by HRGC/MS using stable isotope dilution assay.

    PubMed

    Axel, Claudia; Zannini, Emanuele; Arendt, Elke K; Waters, Deborah M; Czerny, Michael

    2014-04-01

    Lactic acid bacteria (LAB) play an important role as natural preservatives in fermented food and beverage systems, reducing the application of chemical additives. Thus, investigating their antifungal compounds, such as cyclic dipeptides, has gained prominence. Previous research has primarily focussed on isolation of these compounds. However, their precise quantification will provide further information regarding their antifungal performance in a complex system. To address this, deuterated labelled standards of the cyclic dipeptides cyclo(Leu-Pro), cyclo(Pro-Pro), cyclo(Met-Pro) and cyclo(Phe-Pro) were synthesized, and stable isotope dilution assays were developed, enabling an accurate quantification of cyclo(Leu-Pro), cyclo(Pro-Pro), cyclo(Met-Pro) and cyclo(Phe-Pro) in MRS-broth and wort. Quantitative results showed that, in the Lactobacillus brevis R2Δ fermented MRS-broth, the concentrations of cyclo(Leu-Pro), cyclo(Pro-Pro) and cyclo(Phe-Pro) were significantly higher (P < 0.05), than in wort for cyclo (Leu-Pro) when compared with their controls. This indicates that the formation of these three cyclic dipeptides is related to L. brevis R2Δ metabolism. Furthermore, this represents the first report of cyclic dipeptides quantification using stable isotope dilution assays in LAB cultures both in vitro and in a food system.

  2. Isotope-dilution assay for urinary methylmalonic acid in the diagnosis of vitamin B12 deficiency. A prospective clinical evaluation

    SciTech Connect

    Matchar, D.B.; Feussner, J.R.; Millington, D.S.; Wilkinson, R.H. Jr.; Watson, D.J.; Gale, D.

    1987-05-01

    Vitamin B12 deficiency is a frequently considered diagnosis for which there is no single, commonly available and accurate test. A urinary methylmalonic acid assay using gas chromatography-mass spectrometry has been proposed as the preferred test. We reviewed vitamin B12 assays on 1599 consecutive patients and prospectively studied all patients with low serum B12 levels (n = 75) and a random sample of patients with normal levels (n = 68). Of 96 evaluable patients, 7 had clinical deficiency. All 7 deficient patients had urinary methylmalonic acid levels greater than 5 micrograms/mg creatine (sensitivity, 100%; confidence interval, 65% to 100%). Of the 89 patients who were not clinically deficient, 88 had urinary methylmalonic acid levels less than or equal to 5 micrograms/mg creatinine (specificity, 99%). The overall test accuracy in this population was 99%. If the high sensitivity and specificity of the gas chromatography-mass spectrometry assay for urinary methylmalonic acid is supported by other clinical studies, the methylmalonic acid assay may become the reference standard for the diagnosis of vitamin B12 deficiency.

  3. Electro-osmosis in gels: Application to Agar-Agar

    NASA Astrophysics Data System (ADS)

    Cherblanc, Fabien; Boscus, Jérôme; Bénet, Jean-Claude

    2008-10-01

    Widely used in food- and bio-engineering as a reference material, Agar-Agar gel is the focus of an experimental investigation concerning the electro-osmosis phenomenon. After presenting the experimental methods, one trial is discussed in detail. A fair reproducibility of results is obtained, and the averaged electro-osmotic permeability is provided. This value lies in the range generally measured on various kind of soils, even if Agar-Agar gel does not share any micro-structural characteristics with soils. To cite this article: F. Cherblanc et al., C. R. Mecanique 336 (2008).

  4. The Resazurin-Agar Method - a Quick Test to Determine Water Quality

    NASA Astrophysics Data System (ADS)

    Huckfeldt, J.; Westphal, B.; Claußen, L.

    2015-12-01

    Rezasurin has been used as a smart tracer in stream ecosystems to indicate metabolic activity, specifically aerobic respiration by heterotrophic bacteria. Resazurin is a blue compound which is irreversibly reduced to the pink resorufin in the presence of aerobic bacteria. The degree and speed of colour change from blue to pink is a measure of the degree of oxygen consumption and thus an indirect indication of the concentration of aerobic bacteria in a given medium. A high concentration of bacteria in water indicates a bad water quality. In our work a method was developed using resazurin agar plates to find a quick and easy way for testing water quality and comparing concentrations of bacteria in freshwater and seawater samples. The theory was to concentrate bacteria from a defined volume of water sample onto polycarbonate filters (0.2 μm), which are then placed onto the resazurin agar plate. The presence of aerobic bacteria on the filter will reduce the resazurin in the agar and the compound changes its colour. First tests conducted with different dilutions of a pure culture of yoghurt bacteria showed promising results and confirmed the feasibility of the method. In a further assay, we used water samples from different water layers and different temperatures and were also able to observe differences in the concentration of bacteria, depending on these different environmental conditions.The assay was also successfully used with seawater samples, collected from 2 different stations at 3 different depths in the Baltic Sea (salinity=15). The discolouration of the plates showed good correlation with the oxygen concentrations in the water. The resazurin-agar plate method is economical and fast. Several samples could be investigated at the same time without sacrificing the reliability of the results. Thus it is a good pre-screening test for a quantitative evaluation of bacteria in a water sample.

  5. Evaluation of the Double Agar Gel Immunodiffusion Test and of the Enzyme-Linked Immunosorbent Assay in the Diagnosis and Follow-Up of Patients with Chronic Pulmonary Aspergillosis

    PubMed Central

    de Azevedo, Priscila Zacarias; Sylvestre, Tatiane Fernanda; Cavalcante, Ricardo de Souza; de Carvalho, Lídia Raquel; Moris, Daniela Vanessa; de Oliveira, Maria Luiza Cotrim Sartor; Mendes, Rinaldo Poncio

    2015-01-01

    The diagnosis of chronic pulmonary aspergillosis (CPA) depends on the radiologic image and the identification of specific antibodies. The present study aimed to evaluate accuracy parameters of enzyme-linked immunosorbent assay (ELISA) and of the determination of serum galactomannan level in the diagnosis of patients with CPA, comparing these results with the double agar gel immunodiffusion (DID) test. In addition, the prevalence of cross-reactivity and the serological progression after treatment were evaluated by comparing DID and ELISA. Six study groups were formed: G1: 22 patients with CPA, 17 of whom had Aspergillus fungus ball, one chronic cavitary pulmonary aspergillosis (CCPA) and four chronic fibrosing pulmonary aspergillosis (CFPA); G2: 28 patients with pulmonary tuberculosis (TB); G3: 23 patients with histoplasmosis (HST); G4: 50 patients with paracoccidioidomycosis (PCM); G5: 20 patients with cryptococcosis (CRC); and G6: 200 healthy controls. Serum antibodies were measured by DID and ELISA, with two antigen preparations—Aspergillus fumigatus (DID1, ELISA1) and a pool of A. fumigatus, A. flavus and A. niger antigens (DID2, ELISA2). The Platélia Aspergillus Enzyme Immunoassay (EIA) kit was used to measure galactomannan. The cut-off points of ELISA were determined for each antigen preparation and for the 95% and 99% confidence intervals. Despite the low sensitivity, DID was the technique of choice due to its specificity, positive and negative predictive values and positive likelihood ratio–especially with the antigen pool and due to the low frequency of cross-reactivity. ELISA1 and a 0.090 cut-off showed high sensitivity, specificity and negative predictive value, but a high frequency of cross-reactivity with CRC. The best degree of agreement was observed between ELISA1 and ELISA2. The detection of serum galactomannan showed high sensitivity, comparable to ELISA2. The immunodiffusion test showed an excellent relationship with the progression after

  6. Evaluation of fertilizing potential of frozen-thawed dog spermatozoa diluted in ACP-106 using an in vitro sperm--oocyte interaction assay.

    PubMed

    Cardoso, R C S; Silva, A R; Silva, L D M; Chirinéa, V H; Souza, F F; Lopes, M D

    2007-02-01

    The aim of present study was to evaluate frozen canine semen with ACP-106 (Powder Coconut Water) using an in vitro sperm--oocyte interaction assay (SOIA). Ten ejaculates from five stud dogs were diluted in ACP-106 containing 20% egg yolk, submitted to cooling in a thermal box for 40 min and in a refrigerator for 30 min. After this period, a second dilution was performed using ACP-106 containing 20% egg yolk and 12% glycerol. Samples were thawed at 38 degrees C for 1 min. Post-thaw motility was evaluated by light microscopy and by using a computer aided semen analysis (CASA). Plasma membrane integrity and sperm morphology/acrosomal status were evaluated by fluorescent probes (C-FDA/PI) and Bengal Rose respectively. Moreover, frozen-thawed semen was analysed by a SOIA. Subjective post-thaw motility was 52.0 +/- 14.8% and it was significant higher than the total motility estimated by CASA (23.0 +/- 14.8%) because this system considered the egg yolk debris as immotile spermatozoa. Although normal sperm rate and acrosomal integrity evaluated by Bengal Rose stain was 89.6 +/- 3.1% and 94.3 +/- 3.1%, respectively, post-thaw percentage of intact plasma membrane was only 35.1 +/- 14.3%. Regarding SOIA, the percentage of interacted oocytes (bound, penetrated and bound and/or penetrated) was 75.3%. Using regression analysis, it was found significant relations between some CASA patterns and data for SOIA. In conclusion, the freezing-thawing procedure using ACP-106 was efficient for maintain the in vitro fertility potential of dog spermatozoa.

  7. Gravimorphogenesis in agarics.

    PubMed

    Moore, D; Hock, B; Greening, J P; Kern, V D; Novak Frazer, L; Monzer, J

    1996-03-01

    The shape changes which occur in agaric fruit bodies in response to change in the direction of gravity, usually referred to as gravitropism are morphogenetic changes. Our interest in what we prefer to call gravimorphogenesis is to use it to examine morphogenesis experimentally. We are examining two agarics, Coprinus cinereus and Flammulina velutipes, and applying the best available technologies, including video analysis, all forms of electron microscopy, computer-aided image analysis and experiments in orbit in Spacelab. Responses to gravity of the two organisms differ in ways which can be related to their ecological and structural adaptations. C. cinereus reacts extremely rapidly; its fruit body can regain the vertical within 3 h of being placed horizontal, whereas F. velutipes requires 12 h to bend through 90 degrees. The fungi also differ in the bulk of tissue involved in the response. In Coprinus, a zone extending several cm down from the apex is normally involved in bending. In Flammulina, gravisensing is limited to a region just a few mm immediately below the cap, although curvature is performed in a zone of up to 2 cm below. Flammulina cultures were flown on the Spacelab D-2 mission in 1993, and fruit body disorientation in orbit provides the first definitive proof that 'gravitropism' really is a response to the unidirectional gravity vector. Experiments with different clinostat rotation rates in Flammulina indicate that the perception threshold is about 10(-4) x g. Analysis of different times of exposure to an altered gravity vector prior to clinorotation in Coprinus reveals that the perception time is 7 minutes and that continued response requires continued exposure. Cell size determinations in Coprinus demonstrate that cells of the stem increase in length, not diameter, to produce the growth differential. In Flammulina a unique population of highly electron-transparent microvacuoles changes in distribution; decreasing in upper cells and increasing in the

  8. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  9. Development of stable isotope dilution assays for the simultaneous quantitation of biogenic amines and polyamines in foods by LC-MS/MS.

    PubMed

    Mayr, Christine M; Schieberle, Peter

    2012-03-28

    Microbial amino acid metabolism may lead to substantial amounts of biogenic amines in either spontaneously fermented or spoiled foods. For products manufactured with starter cultures, it has been suggested that certain strains may produce higher amounts of such amines than others; however, to support efforts of food manufacturers in mitigating amine formation, reliable methods for amine quantitation are needed. Using 10 isotopically labeled biogenic amines as the internal standards, stable isotope dilution assays were developed for the quantitation of 12 biogenic amines and of the 2 polyamines, spermine and spermidine, in one LC-MS/MS run. Application of the method to several foods revealed high concentrations of, for example, tyramine and putrescine in salami and fermented cabbage, whereas histamine was highest in Parmesan cheese and fermented cabbage. On the other hand, ethanolamine was highest in red wine and Parmesan cheese. The results suggest that different amino acid decarboxylases are active in the respective foods depending on the microorganisms present. The polyamine spermine was highest in salami and tuna.

  10. Quantification of 2-acetyl-1-pyrroline in rice by stable isotope dilution assay through headspace solid-phase microextraction coupled to gas chromatography-tandem mass spectrometry.

    PubMed

    Maraval, Isabelle; Sen, Kemal; Agrebi, Abdelhamid; Menut, Chantal; Morere, Alain; Boulanger, Renaud; Gay, Frédéric; Mestres, Christian; Gunata, Ziya

    2010-08-24

    A new and convenient synthesis of 2-acetyl-1-pyrroline (2AP), a potent flavor compound in rice, and its ring-deuterated analog, 2-acetyl-1-d(2)-pyrroline (2AP-d(2)), was reported. A stable isotope dilution assay (SIDA), involving headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-positive chemical ionization-ion trap-tandem mass spectrometry (GC-PCI-IT-MS-MS), was developed for 2AP quantification. A divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was used for HS-SPME procedure and parameters affecting analytes recovery, such as extraction time and temperature, pH and salt, were studied. The repeatability of the method (n=10) expressed as relative standard deviation (RSD) was 11.6%. A good linearity was observed from 5.9 to 779 ng of 2AP (r(2)=0.9989). Limits of detection (LOD) and quantification (LOQ) for 2AP were 0.1 and 0.4 ng g(-1) of rice, respectively. The recovery of spiked 2AP from rice matrix was almost complete. The developed method was applied to the quantification of 2AP in aerial parts and grains of scented and non-scented rice cultivars.

  11. Quantitation using a stable isotope dilution assay (SIDA) and thresholds of taste-active pyroglutamyl decapeptide ethyl esters (PGDPEs) in sake.

    PubMed

    Hashizume, Katsumi; Ito, Toshiko; Igarashi, Shinya

    2017-03-01

    A stable isotope dilution assay (SIDA) for two taste-active pyroglutamyl decapeptide ethyl esters (PGDPE1; (pGlu)LFGPNVNPWCOOC2H5, PGDPE2; (pGlu)LFNPSTNPWCOOC2H5) in sake was developed using deuterated isotopes and high-resolution mass spectrometry. Recognition thresholds of PGDPEs in sake were estimated as 3.8 μg/L for PGDPE1 and 8.1 μg/L for PGDPE2, evaluated using 11 student panelists aged in their twenties. Quantitated concentrations in 18 commercial sake samples ranged from 0 to 27 μg/L for PGDPE1 and from 0 to 202 μg/L for PGDPE2. The maximum levels of PGDPE1 and PGDPE2 in the sake samples were approximately 8 and 25 times higher than the estimated recognition thresholds, respectively. The results indicated that PGDPEs may play significant sensory roles in the sake. The level of PGDPEs in unpasteurized sake samples decreased during storage for 50 days at 6 °C, suggesting PGDPEs may be enzymatically decomposed.

  12. Synthesis of four carbon-13-labeled type a trichothecene mycotoxins and their application as internal standards in stable isotope dilution assays.

    PubMed

    Asam, Stefan; Rychlik, Michael

    2006-09-06

    The first stable isotope dilution assay (SIDA) for the simultaneous quantitation of the most abundant type A trichothecenes in foods and feeds was developed. Synthesis of carbon-13-labeled T2-toxin, HT2-toxin, diacetoxyscirpenol, and monoacetoxyscirpenol was accomplished by [13C2]-acetylation of T2-triol and scirpentriol, respectively. Scirpentriol was prepared from diacetoxyscirpenol by complete alkaline hydrolysis and subsequently was converted to [13C6]-triacetoxyscirpentriol by peracetylation with [13C4]-acetic anhydride. The latter compound was selectively hydrolyzed using ammonium hydroxide to give [13C4]-diacetoxyscirpenol and [13C2]-monoacetoxyscirpenol in reasonable yields. Analogously, [13C6]-T2-triacetate was prepared from T2-triol and subjected to controlled hydrolysis to yield [13C4]-T2-toxin and [13C2]-HT2-toxin. All synthesized products were characterized by NMR and MS experiments. Using the prepared isotopically labeled standards, SIDAs were developed for the quantitation of type A trichothecenes in food and feeds. The mycotoxins were quantified by LC-single and tandem MS after cleanup on multifunctional columns. The method revealed good sensitivity with low detection and quantification limits along with excellent recovery and good precision in interassay studies. Food samples were analyzed using the developed SIDA and showed substantial contamination of oat products with T2-toxin and HT2-toxin. Diacetoxyscirpenol was detected on potatoes, whereas monoacetoxyscirpenol was not present in the analyzed samples.

  13. Determination of mycotoxins in milk-based products and infant formula using stable isotope dilution assay and liquid chromatography tandem mass spectrometry.

    PubMed

    Zhang, Kai; Wong, Jon W; Hayward, Douglas G; Vaclavikova, Marta; Liao, Chia-Ding; Trucksess, Mary W

    2013-07-03

    A stable isotope dilution assay and liquid chromatography tandem mass spectrometry (LC-MS/MS) method was developed and validated for the determination of 12 mycotoxins, aflatoxins B₁, B₂, G₁, G₂, and M₁, deoxynivalenol, fumonisins B₁, B₂, and B₃, ochratoxin A, T-2 toxin, and zearalenone, in milk-based infant formula and foods. Samples were fortified with 12 ¹³C uniformly labeled mycotoxins ([¹³C]-mycotoxins) that correspond to the 12 target mycotoxins and prepared by dilution and filtration, followed by LC-MS/MS analysis. Quantitation was achieved using the relative response factors of [¹³C]-mycotoxins and target mycotoxins. The average recoveries in fortified milk, milk-based infant formula, milk powder, and baby yogurt of aflatoxins B₁, B₂, G₁, and G₂ (2, 10, and 50 μg/kg), aflatoxin M₁ (0.5, 2.5, and 12.5 μg/kg), deoxynivalenol, fumonisins B₁, B₂, and B₃ (40, 200, and 1000 μg/kg), ochratoxin A, T-2 toxin, and zearalenone (20, 100, and 500 μg/kg), range from 89 to 126% with RSDs of <20%. The individual recoveries in the four fortified matrices range from 72% (fumonisin B₃, 20 μg/kg, milk-based infant formula) to 136% (T-2 toxin, 20 μg/kg, milk powder), with RSDs ranging from 2 to 25%. The limits of quantitation (LOQs) were from 0.01 μg/kg (aflatoxin M₁) to 2 (fumonisin B₁) μg/kg. Aflatoxin M₁ was detected in two European Reference materials at 0.127 ± 0.013 μg/kg (certified value = 0.111 ± 0.018 μg/kg) and 0.46 ± 0.04 μg/kg (certified value = 0.44 ± 0.06 μg/kg), respectively. In 60 local market samples, aflatoxins B₁ (1.14 ± 0.10 μg/kg) and B₂ (0.20 ± 0.03 μg/kg) were detected in one milk powder sample. Aflatoxin M₁ was detected in three imported samples (condensed milk, milk-based infant formula, and table cream), ranging from 0.10 to 0.40 μg/kg. The validated method provides sufficient selectivity, sensitivity, accuracy, and reproducibility to screen for aflatoxin M₁ at nanograms per

  14. Stable Isotope Dilution Assays for Clinical Analyses of Folates and Other One-Carbon Metabolites: Application to Folate-Deficiency Studies

    PubMed Central

    Kopp, Markus; Morisset, Rosalie; Koehler, Peter

    2016-01-01

    Folate deficiency is generally accepted as a potential direct or indirect risk factor for diseases including spina bifida, coronary heart diseases, malfunctions of the central nervous system, and cancer. The direct inclusion of folates in the methylation cycle, including the remethylation of homocysteine and regeneration of S-adenosylmethionine, underlines the importance of these vitamins and other components of one-carbon metabolism. Therefore, the aim of the present study was to develop a multiple stable isotope dilution assay (SIDA) for the respective analytes in plasma and tissue samples to allow for a closer look at the interaction between a severe folate deficiency and local folate status, as well as further interactions with circulating S-adenosylmethionine, S-adenosylhomocysteine, and homocysteine. The analytical methods were based on SIDAs coupled with liquid chromatography—tandem mass spectrometry (LC-MS/MS) analysis using the deuterated folates [2H4]-5-methyltetrahydrofolic acid, [2H4]-5-formyltetrahydrofolic acid, [2H4]-tetrahydrofolic acid, [2H4]-10-formylfolic acid, and [2H4]-folic acid and the deuterated one-carbon metabolites [2H4]-homocysteine, [2H4]-S-adenosylhomocysteine, and [2H3]-S-adenosylmethionine as internal standards. Three analytical methods have been developed for the analysis of homocysteine, S-adenosylmethionine, S-adenosylhomocysteine, and six folate vitamers. Validation data for the analysis of C1-metabolites in plasma and tissue samples or folate analysis in tissue samples revealed excellent sensitivity, precision, and recovery for all analytes studied. The miniaturized methods using sample volumes as low as 50 μL and weighed portions of 5–25 mg will allow the assessment of the status of folates and additional biomarkers of impaired one-carbon metabolism during folate deficiency. PMID:27276031

  15. Stable Isotope Dilution Assays for Clinical Analyses of Folates and Other One-Carbon Metabolites: Application to Folate-Deficiency Studies.

    PubMed

    Kopp, Markus; Morisset, Rosalie; Koehler, Peter; Rychlik, Michael

    2016-01-01

    Folate deficiency is generally accepted as a potential direct or indirect risk factor for diseases including spina bifida, coronary heart diseases, malfunctions of the central nervous system, and cancer. The direct inclusion of folates in the methylation cycle, including the remethylation of homocysteine and regeneration of S-adenosylmethionine, underlines the importance of these vitamins and other components of one-carbon metabolism. Therefore, the aim of the present study was to develop a multiple stable isotope dilution assay (SIDA) for the respective analytes in plasma and tissue samples to allow for a closer look at the interaction between a severe folate deficiency and local folate status, as well as further interactions with circulating S-adenosylmethionine, S-adenosylhomocysteine, and homocysteine. The analytical methods were based on SIDAs coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis using the deuterated folates [2H4]-5-methyltetrahydrofolic acid, [2H4]-5-formyltetrahydrofolic acid, [2H4]-tetrahydrofolic acid, [2H4]-10-formylfolic acid, and [2H4]-folic acid and the deuterated one-carbon metabolites [2H4]-homocysteine, [2H4]-S-adenosylhomocysteine, and [2H3]-S-adenosylmethionine as internal standards. Three analytical methods have been developed for the analysis of homocysteine, S-adenosylmethionine, S-adenosylhomocysteine, and six folate vitamers. Validation data for the analysis of C1-metabolites in plasma and tissue samples or folate analysis in tissue samples revealed excellent sensitivity, precision, and recovery for all analytes studied. The miniaturized methods using sample volumes as low as 50 μL and weighed portions of 5-25 mg will allow the assessment of the status of folates and additional biomarkers of impaired one-carbon metabolism during folate deficiency.

  16. Precise determination of the Alternaria mycotoxins alternariol and alternariol monomethyl ether in cereal, fruit and vegetable products using stable isotope dilution assays.

    PubMed

    Asam, Stefan; Konitzer, Katharina; Rychlik, Michael

    2011-02-01

    Cereal, fruit and vegetable products were analyzed for contamination with the Alternaria mycotoxins alternariol (AOH) and alternariol monomethyl ether (AME) using stable isotope dilution assays (SIDAs). Both toxins were practically not detected in cereals and cereal products: AOH-one out of 13 samples at a content of 4.1 μg/kg; AME-two out of 13 samples at contents ranging between 0.2 and 0.6 μg/kg. However, if cereals for animal nutrition were analyzed, much higher values were found: AOH-five out of six samples (13-250 μg/kg); AME-six out of six samples (3-100 μg/kg). This finding may pose a potential problem concerning animal health. AOH and AME were frequently detected in vegetable products: AOH-5 out of 10 samples (2.6-25 μg/kg); AME-6 out of 10 samples (0.1-5 μg/kg). Tomato products were affected, especially. The highest content of AOH (25 μg/kg) and AME (5 μg/kg) were found in triple concentrated tomato paste. Special wines like "Trockenbeerenauslese" or "Spätlese" (affected by noble rot in the vineyard) contained AOH (4/6 samples; 1.2-4.9 μg/kg) and AME (4/6 samples; 0.1-0.3 μg/kg), but the values did not exceed the values of both toxins that were found generally in wines.

  17. Automatic diluter for bacteriological samples.

    PubMed Central

    Trinel, P A; Bleuze, P; Leroy, G; Moschetto, Y; Leclerc, H

    1983-01-01

    The described apparatus, carrying 190 tubes, allows automatic and aseptic dilution of liquid or suspended-solid samples. Serial 10-fold dilutions are programmable from 10(-1) to 10(-9) and are carried out in glass tubes with screw caps and split silicone septa. Dilution assays performed with strains of Escherichia coli and Bacillus stearothermophilus permitted efficient conditions for sterilization of the needle to be defined and showed that the automatic dilutions were as accurate and as reproducible as the most rigorous conventional dilutions. Images PMID:6338826

  18. Studies on antimicrobial activity, in vitro, of Physalis angulata L. (Solanaceae) fraction and physalin B bringing out the importance of assay determination.

    PubMed

    Silva, Melissa T G; Simas, Sonia M; Batista, Terezinha G F M; Cardarelli, Paola; Tomassini, Therezinha C B

    2005-11-01

    Complex physalin metabolites present in the capsules of the fruit of Physalis angulata L. have been isolated and submitted to a series of assays of antimicrobial activity against Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 29213, S. aureus ATCC 25923, S. aureus ATCC 6538P, Neisseria gonorrhoeae ATCC 49226, Escherichia coli ATCC 8739; E. coli ATCC 25922, Candida albicans ATCC 10231 applying different methodologies such as: bioautography, dilution broth, dilution agar, and agar diffusion techniques. A mixture of physalins (pool) containing physalins B, D, F, G inhibit S. aureus ATCC 29213, S. aureus ATCC 25923, S. aureus ATCC 6538P, and N. gonorrhoeae ATCC 49226 at a concentration of 200 mg/microl, using agar dilution assays. The mixture was inactive against P. aeruginosa ATCC27853, E. coli ATCC 8739; E. coli ATCC 25922, C. albicans ATCC 10231 when applying bioautography assays. Physalin B (200 microg/ml) by the agar diffusion assay inhibited S. aureus ATCC 6538P by +/- 85%; and may be considered responsible for the antimicrobial activity.

  19. Contribution to diagnostics/prognostics of tuberculosis in children. I. New methods of assaying zinc and simultaneously copper and zinc in diluted sera by flame atomic-absorption spectrometry.

    PubMed

    Luterotti, Svjetlana; Kordić, Tončica Vukman; Dodig, Slavica

    2015-09-01

    In an attempt to provide a reliable status of metal ions in children, new methods of analysis of children's sera are proposed. New flame atomic-absorption spectrometric (FAAS) methods are simple, cost- and time-effective and, above all, labor-, reagent- and sample-saving. Two methods were suggested: method A for simultaneous determination of Cu and Zn from 5-fold diluted sera, and method B, for assaying zinc alone in 10-fold diluted samples. Both methods are based on a single-step sample pretreatment (deproteinization with 3 mol dm-3 HCl). Method A uses a single-step calibration with a mixed standard. The main advantage of method B is an additional reduction in sample consumption. Both methods were fully validated against reference methods. Accuracy, sensitivity and precision have proven them to be comparable to the reference methods in terms of analytical performance, and applicable to analyses of children's sera.

  20. Dispersion serial dilution methods using the gradient diluter device.

    PubMed

    Walling, Leslie; Schulz, Craig; Johnson, Michael

    2012-12-01

    A solute aspirated into a prefilled tube of diluent undergoes a dilution effect known as dispersion. Traditionally the effects of dispersion have been considered a negative consequence of using liquid-filled fixed-tip liquid handlers. We present a novel device and technique that utilizes the effects of dispersion to the benefit of making dilutions. The device known as the Gradient Diluter extends the dilution range of practical serial dilutions to six orders of magnitude in final volumes as low as 10 μL. Presented are the device, dispersion methods, and validation tests using fluorescence detection of sulforhodamine and the high-performance liquid chromatography/ultraviolet detection of furosemide. In addition, a T-cell inhibition assay of a relevant downstream protein is used to demonstrate IC(50) curves made with the Gradient Diluter compare favorably with those generated by hand.

  1. Standardized methods and quality control limits for agar and broth microdilution susceptibility testing of Mycoplasma pneumoniae, Mycoplasma hominis, and Ureaplasma urealyticum.

    PubMed

    Waites, Ken B; Duffy, Lynn B; Bébéar, Cécile M; Matlow, Anne; Talkington, Deborah F; Kenny, George E; Totten, Patricia A; Bade, Donald J; Zheng, Xiaotian; Davidson, Maureen K; Shortridge, Virginia D; Watts, Jeffrey L; Brown, Steven D

    2012-11-01

    An international multilaboratory collaborative study was conducted to develop standard media and consensus methods for the performance and quality control of antimicrobial susceptibility testing of Mycoplasma pneumoniae, Mycoplasma hominis, and Ureaplasma urealyticum using broth microdilution and agar dilution techniques. A reference strain from the American Type Culture Collection was designated for each species, which was to be used for quality control purposes. Repeat testing of replicate samples of each reference strain by participating laboratories utilizing both methods and different lots of media enabled a 3- to 4-dilution MIC range to be established for drugs in several different classes, including tetracyclines, macrolides, ketolides, lincosamides, and fluoroquinolones. This represents the first multilaboratory collaboration to standardize susceptibility testing methods and to designate quality control parameters to ensure accurate and reliable assay results for mycoplasmas and ureaplasmas that infect humans.

  2. Comparison of the BBL CHROMagar Staph aureus Agar Medium to Conventional Media for Detection of Staphylococcus aureus in Respiratory Samples

    PubMed Central

    Flayhart, Diane; Lema, Clara; Borek, Anita; Carroll, Karen C.

    2004-01-01

    Screening for Staphylococcus aureus has become routine in certain patient populations. This study is the first clinical evaluation of the BBL CHROMagar Staph aureus agar (CSA) medium (BD Diagnostics, Sparks, Md.) for detection of S. aureus in nasal surveillance cultures and in respiratory samples from cystic fibrosis (CF) patients. S. aureus colonies appear mauve on CSA. Other organisms are inhibited or produce a distinctly different colony color. S. aureus was identified from all media by slide coagulase, exogenous DNase, and mannitol fermentation assays. Susceptibility testing was performed using the agar dilution method. A total of 679 samples were evaluated. All samples were inoculated onto CSA. Nasal surveillance cultures were inoculated onto sheep blood agar (SBA) (BD Diagnostics), and samples from CF patients were inoculated onto mannitol salt agar (MSA) (BD Diagnostics). Of the 679 samples cultured, 200 organisms produced a mauve color on CSA (suspicious for S. aureus) and 180 were positive for S. aureus on SBA or MSA. Of 200 CSA-positive samples 191 were identified as S. aureus. Nine mauve colonies were slide coagulase negative and were subsequently identified as Staphylococcus lugdunensis (one), Staphylococcus epidermidis (three), Staphylococcus haemolyticus (one), and Corynebacterium species (four). CSA improved the ability to detect S. aureus by recovering 12 S. aureus isolates missed by conventional media. Of the 192 S. aureus isolates recovered, 122 were methicillin susceptible and 70 were methicillin resistant. Overall, the sensitivity and specificity of CSA in this study were 99.5 and 98%, respectively. There was no difference in the performance of the slide coagulase test or in susceptibility testing performed on S. aureus recovered from CSA compared to SBA or MSA. Our data support the use of CSA in place of standard culture media for detection of S. aureus in heavily contaminated respiratory samples. PMID:15297498

  3. Use of the Soft-agar Overlay Technique to Screen for Bacterially Produced Inhibitory Compounds

    PubMed Central

    Hockett, Kevin L.; Baltrus, David A.

    2017-01-01

    The soft-agar overlay technique was originally developed over 70 years ago and has been widely used in several areas of microbiological research, including work with bacteriophages and bacteriocins, proteinaceous antibacterial agents. This approach is relatively inexpensive, with minimal resource requirements. This technique consists of spotting supernatant from a donor strain (potentially harboring a toxic compound(s)) onto a solidified soft agar overlay that is seeded with a bacterial test strain (potentially sensitive to the toxic compound(s)). We utilized this technique to screen a library of Pseudomonas syringae strains for intraspecific killing. By combining this approach with a precipitation step and targeted gene deletions, multiple toxic compounds produced by the same strain can be differentiated. The two antagonistic agents commonly recovered using this technique are bacteriophages and bacteriocins. These two agents can be differentiated using two simple additional tests. Performing a serial dilution on a supernatant containing bacteriophage will result in individual plaques becoming less in number with greater dilution, whereas serial dilution of a supernatant containing bacteriocin will result a clearing zone that becomes uniformly more turbid with greater dilution. Additionally, a bacteriophage will produce a clearing zone when spotted onto a fresh soft agar overlay seeded with the same strain, whereas a bacteriocin will not produce a clearing zone when transferred to a fresh soft agar lawn, owing to the dilution of the bacteriocin. PMID:28117830

  4. Use of the Soft-agar Overlay Technique to Screen for Bacterially Produced Inhibitory Compounds.

    PubMed

    Hockett, Kevin L; Baltrus, David A

    2017-01-14

    The soft-agar overlay technique was originally developed over 70 years ago and has been widely used in several areas of microbiological research, including work with bacteriophages and bacteriocins, proteinaceous antibacterial agents. This approach is relatively inexpensive, with minimal resource requirements. This technique consists of spotting supernatant from a donor strain (potentially harboring a toxic compound(s)) onto a solidified soft agar overlay that is seeded with a bacterial test strain (potentially sensitive to the toxic compound(s)). We utilized this technique to screen a library of Pseudomonas syringae strains for intraspecific killing. By combining this approach with a precipitation step and targeted gene deletions, multiple toxic compounds produced by the same strain can be differentiated. The two antagonistic agents commonly recovered using this technique are bacteriophages and bacteriocins. These two agents can be differentiated using two simple additional tests. Performing a serial dilution on a supernatant containing bacteriophage will result in individual plaques becoming less in number with greater dilution, whereas serial dilution of a supernatant containing bacteriocin will result a clearing zone that becomes uniformly more turbid with greater dilution. Additionally, a bacteriophage will produce a clearing zone when spotted onto a fresh soft agar overlay seeded with the same strain, whereas a bacteriocin will not produce a clearing zone when transferred to a fresh soft agar lawn, owing to the dilution of the bacteriocin.

  5. End-point limiting-dilution real-time PCR assay for evaluation of hepatitis C virus quasispecies in serum: performance under optimal and suboptimal conditions.

    PubMed

    Ramachandran, Sumathi; Xia, Guo-Liang; Ganova-Raeva, Lilia M; Nainan, Omana V; Khudyakov, Yury

    2008-08-01

    An approach for determination of hepatitis C virus (HCV) quasispecies by end-point limiting-dilution real-time PCR (EPLD-PCR) is described. It involves isolation of individual coexisting sequence variants of the hypervariable region 1 (HVR1) of the HCV genome from serum specimens using a limiting-dilution protocol. EPLD-PCR applied to an HCV outbreak study provided insights into the epidemiological relationships between incident and chronic cases. When applied to samples from a longitudinal study of infected patients, HVR1 sequences from each sampling time-point were observed to group as distinct phylogenetic clusters. Melting peak analysis conducted on EPLD-PCR products generated from these patients could be used for evaluation of HVR1 sequence heterogeneity without recourse to clonal sequencing. Further, to better understand the mechanism of single-molecule PCR, experiments were conducted under optimal and suboptimal annealing temperatures. Under all temperature conditions tested, HVR1 variants from the major phylogenetic clusters of quasispecies could be amplified, revealing that successful HVR1 quasispecies analysis is not contingent to dilution of starting cDNA preparations to a single-molecule state. It was found that EPLD-PCR conducted at suboptimal annealing temperatures generated distributions of unique-sequence variants slightly different from the distribution obtained by PCR conducted at the optimal temperature. Hence, EPLD-PCR conditions can be manipulated to access different subpopulations of HCV HVR1 quasispecies, thus, improving the range of the quasispecies detection. Although EPLD-PCR conducted at different conditions detect slightly different quasispecies populations, as was shown in this study, the resulted samples of quasispecies are completely suitable for molecular epidemiological investigation in different clinical and epidemiological settings.

  6. Generation of leukemia-reactive cytotoxic T lymphocytes from HLA-identical donors of patients with chronic myeloid leukemia using modifications of a limiting dilution assay.

    PubMed

    Smit, W M; Rijnbeek, M; van Bergen, C A; Willemze, R; Falkenburg, J H

    1998-03-01

    Donor leukocyte transfusions (DLT) have an anti-leukemic effect in most patients with a relapse of chronic myeloid leukemia (CML) after allogeneic stem cell transplantation. However, DLT are often complicated by graft-versus-host disease. Selection of donor lymphocytes with a relative specificity for leukemic cells is desirable. The generation of leukemia-reactive cytotoxic T lymphocyte (CTL) responses between HLA-identical donors and patients in bulk cultures showed major variations, and false negative results were observed. In a modification of a limiting dilution analysis (LDA) two-fold serial dilutions of HLA-identical donor mononuclear cells (MNC) were cultured in the presence of CML cells. The anti-leukemic CTL precursor frequencies in these donors varied between <1 and 9 per 106 MNC. HLA-restricted CD4+ or CD8+ lymphocytes as well as MHC non-restricted gammadelta T cells were responsible for the anti-leukemic responses. A positive correlation between cytotoxicity in the various wells after 3, 4 and 5 weeks of culture could be found. The LDA may be superior to bulk cultures in selecting stable immune responses and in separating multiple different anti-leukemic T cell responses in each donor-patient combination.

  7. Dilution Confusion: Conventions for Defining a Dilution

    ERIC Educational Resources Information Center

    Fishel, Laurence A.

    2010-01-01

    Two conventions for preparing dilutions are used in clinical laboratories. The first convention defines an "a:b" dilution as "a" volumes of solution A plus "b" volumes of solution B. The second convention defines an "a:b" dilution as "a" volumes of solution A diluted into a final volume of "b". Use of the incorrect dilution convention could affect…

  8. Performance and Verification of a Real-Time PCR Assay Targeting the gyrA Gene for Prediction of Ciprofloxacin Resistance in Neisseria gonorrhoeae

    PubMed Central

    Hemarajata, P.; Yang, S.; Soge, O. O.; Klausner, J. D.

    2016-01-01

    In the United States, 19.2% of Neisseria gonorrhoeae isolates are resistant to ciprofloxacin. We evaluated a real-time PCR assay to predict ciprofloxacin susceptibility using residual DNA from the Roche Cobas 4800 CT/NG assay. The results of the assay were 100% concordant with agar dilution susceptibility test results for 100 clinical isolates. Among 76 clinical urine and swab specimens positive for N. gonorrhoeae by the Cobas assay, 71% could be genotyped. The test took 1.5 h to perform, allowing the physician to receive results in time to make informed clinical decisions. PMID:26739156

  9. Automated agar plate streaker: a linear plater on Society for Biomolecular Sciences standard plates.

    PubMed

    King, Gregory W; Kath, Gary S; Siciliano, Sal; Simpson, Neal; Masurekar, Prakash; Sigmund, Jan; Polishook, Jon; Skwish, Stephen; Bills, Gerald; Genilloud, Olga; Peláez, Fernando; Martín, Jesus; Dufresne, Claude

    2006-09-01

    Several protocols for bacterial isolation and techniques for aerobic plate counting rely on the use of a spiral plater to deposit concentration gradients of microbial suspensions onto a circular agar plate to isolate colony growth. The advantage of applying a gradient of concentrations across the agar surface is that the original microbiological sample can be applied at a single concentration rather than as multiple serial dilutions. The spiral plater gradually dilutes the sample across a compact area and therefore saves time preparing dilutions and multiple agar plates. Commercial spiral platers are not automated and require manual sample loading. Dispensing of the sample volume and rate of gradients are often very limited in range. Furthermore, the spiral sample application cannot be used with rectangular microplates. Another limitation of commercial spiral platers is that they are useful only for dilute, filtered suspensions and cannot plate suspensions of coarse organic particles therefore precluding the use of many kinds of microorganism-containing substrata. An automated agar plate spreader capable of processing 99 rectangular microplates in unattended mode is described. This novel instrument is capable of dispensing discrete volumes of sample in a linear pattern. It can be programmed to dispense a sample suspense at a uniform application rate or across a decreasing concentration gradient.

  10. Vitamin A concentrations in liver determined by isotope dilution assay with tetradeuterated vitamin A and by biopsy in generally healthy adult humans

    SciTech Connect

    Furr, H.C.; Amedee-Manesme, O.; Clifford, A.J.; Bergen, H.R. 3d.; Jones, A.D.; Anderson, D.P.; Olson, J.A.

    1989-04-01

    The vitamin A status in 11 generally healthy surgical patients was estimated by measuring the dilution of a 45-mg oral dose of tetradeuterated retinyl acetate (99% pure). After purification of retinol by high-performance liquid chromatography, the ratio of /sup 2/H/sub 4/-retinol:/sup 1/H-retinol in plasma was measured by gas chromatography-mass spectrometry. On the basis of the observed ratios of (/sup 2/H/sub 4/)retinol:(/sup 1/H)retinol over 19-47 d, the total body reserves and liver concentrations of vitamin A were calculated. Liver biopsy samples taken at surgery were directly analyzed for vitamin A. The correlation coefficient between calculated and measured liver vitamin A concentrations for 10 of the subjects was 0.88, and the Spearman's rank correlation coefficient was 0.95 (p less than 0.002). Thus, total body reserves of vitamin A in humans can be estimated validly in the marginal and satisfactory ranges by a benign, relatively noninvasive procedure.

  11. Stable isotope dilution assay (SIDA) and HS-SPME-GCMS quantification of key aroma volatiles for fruit and sap of Australian mango cultivars.

    PubMed

    San, Anh T; Joyce, Daryl C; Hofman, Peter J; Macnish, Andrew J; Webb, Richard I; Matovic, Nicolas J; Williams, Craig M; De Voss, James J; Wong, Siew H; Smyth, Heather E

    2017-04-15

    Reported herein is a high throughput method to quantify in a single analysis the key volatiles that contribute to the aroma of commercially significant mango cultivars grown in Australia. The method constitutes stable isotope dilution analysis (SIDA) in conjunction with headspace (HS) solid-phase microextraction (SPME) coupled with gas-chromatography mass spectrometry (GCMS). Deuterium labelled analogues of the target analytes were either purchased commercially or synthesised for use as internal standards. Seven volatiles, hexanal, 3-carene, α-terpinene, p-cymene, limonene, α-terpinolene and ethyl octanoate, were targeted. The resulting calibration functions had determination coefficients (R(2)) ranging from 0.93775 to 0.99741. High recovery efficiencies for spiked mango samples were also achieved. The method was applied to identify the key aroma volatile compounds produced by 'Kensington Pride' and 'B74' mango fruit and by 'Honey Gold' mango sap. This method represents a marked improvement over current methods for detecting and measuring concentrations of mango fruit and sap volatiles.

  12. Rapid method for the determination of multiple mycotoxins in wines and beers by LC-MS/MS using a stable isotope dilution assay.

    PubMed

    Al-Taher, Fadwa; Banaszewski, Katie; Jackson, Lauren; Zweigenbaum, Jerry; Ryu, Dojin; Cappozzo, Jack

    2013-03-13

    A "dilute and shoot" method for the liquid chromatography-tandem mass spectrometric (LC-MS/MS) determination of multiple mycotoxins (aflatoxins B1, B2, G1, G2, ochratoxin A (OTA), fumonisins (F) B1 and B2, zearalenone, deoxynivalenol, T-2 toxin, and HT-2 toxin) in wines and beers has been developed and validated. Separation was accomplished using ultrahigh-performance liquid chromatography (UHPLC) with <10 min analysis time. Mycotoxins were detected by dynamic multiple reaction monitoring (MRM) in positive electrospray ionization mode. Due to matrix effects, (13)C-uniformly labeled mycotoxins were added to the sample extracts prior to LC-MS/MS analysis. With external calibration, recoveries were 18-148% for white wines, 15-118% for red wines, and 20-125% for beers, at three spiking levels. The (13)C-labeled internal standards compensated for matrix effects effectively, with overall recoveries of 94-112% for white wines, 80-137% for red wines, and 61-131% for beers, with greater recoveries for FB1 and FB2, at three spiking levels. The relative standard deviation was <20% for all analytes in the wines and beers. This method was applied to a USDA-funded nationwide survey of domestic and imported wines and beers for the determination of OTA and extended to include other mycotoxins.

  13. A novel agar formulation for isolation and direct enumeration of Vibrio vulnificus from oyster tissue.

    PubMed

    Griffitt, Kimberly J; Grimes, D Jay

    2013-08-01

    A new selective and differential medium, Vibrio vulnificus X-Gal (VVX), was developed for direct enumeration of V. vulnificus (Vv) from oyster samples. This agar utilizes cellobiose and lactose as carbon sources, and the antibiotics colistin and polymyxin B as selective agents. Hydrolysis of 5-bromo-4-chloro-3-indolyl- beta-d-galactopyranoside (x-gal), used in the agar as a lactose analog, produces an insoluble blue dye that makes lactose positive colonies easily distinguishable from any non-lactose fermenting bacteria. Various bacterial species were spot plated onto thiosulfate-citrate-bile salts-sucrose agar (TCBS), and CHROMagar Vibrio, two vibrio-specific selective agars, non-selective agar, and VVX to compare selectivity of VVX to other widely used media. A V. vulnificus pure culture was serially diluted on VVX and non-selective agar to determine the VVX percent recovery. Water and oyster samples were spread plated on VVX agar and allowed to incubate for 16-18 h at 33 °C. Blue and white colonies from VVX agar were picked and screened by end point PCR for the Vv hemolysin vvhA. VVX agar showed a significant improvement over TCBS and CHROMagar at preventing non-target growth. There was an 87.5% recovery compared to non-selective plating and a 98% positivity rate of blue colonies picked from oyster tissue plating. The findings suggest that this new agar is a fast, distinctive, and accurate method for enumeration of V. vulnificus from the environment.

  14. Quantification of Nε-(2-Furoylmethyl)-L-lysine (furosine), Nε-(Carboxymethyl)-L-lysine (CML), Nε-(Carboxyethyl)-L-lysine (CEL) and total lysine through stable isotope dilution assay and tandem mass spectrometry.

    PubMed

    Troise, Antonio Dario; Fiore, Alberto; Wiltafsky, Markus; Fogliano, Vincenzo

    2015-12-01

    The control of Maillard reaction (MR) is a key point to ensure processed foods quality. Due to the presence of a primary amino group on its side chain, lysine is particularly prone to chemical modifications with the formation of Amadori products (AP), Nε-(Carboxymethyl)-L-lysine (CML), Nε-(Carboxyethyl)-L-lysine (CEL). A new analytical strategy was proposed which allowed to simultaneously quantify lysine, CML, CEL and the Nε-(2-Furoylmethyl)-L-lysine (furosine), the indirect marker of AP. The procedure is based on stable isotope dilution assay followed by liquid chromatography tandem mass spectrometry. It showed high sensitivity and good reproducibility and repeatability in different foods. The limit of detection and the RSD% were lower than 5 ppb and below 8%, respectively. Results obtained with the new procedure not only improved the knowledge about the reliability of thermal treatment markers, but also defined new insights in the relationship between Maillard reaction products and their precursors.

  15. Performance of flow cytometric analysis for the micronucleus assay--a reconstruction model using serial dilutions of malaria-infected cells with normal mouse peripheral blood.

    PubMed

    Torous, Dorothea; Asano, Norihide; Tometsko, Carol; Sugunan, Siva; Dertinger, Stephen; Morita, Takeshi; Hayashi, Makoto

    2006-01-01

    To confirm the performance and statistical power of a flow cytometric method for scoring micronucleated erythrocytes, reconstruction experiments were performed. For these investigations, peripheral blood erythrocytes from untreated mice, with a micronucleated erythrocyte frequency of approximately 0.1% were combined with known quantities of Plasmodium berghei (malaria) infected mouse erythrocytes. These cells had an infected erythrocyte frequency of approximately 0.7%, and mimic the DNA content of micronuclei (MN). For an initial experiment, samples with a range of MN/malaria (Mal) content were constructed and analysed in triplicate by flow cytometry until 2000, 20,000 and 200,000 total erythrocytes were acquired. In a second experiment, each specimen was analysed in triplicate until 2000, 20,000, 200,000 and 1,000,000 erythrocytes were acquired. As expected, the sensitivity of the assay to detect small changes in rare erythrocyte sub-population frequencies was directly related to the number of cells analysed. For example, when 2000 cells were scored, increases in MN/Mal frequencies of 3.9- or 2.7-fold were detected as statistically significant. When 200,000 cells were analysed, a 1.2-fold increase was detected. These data have implications for the experimental design and interpretation of micronucleus assays that are based on automated scoring procedures, since previously unattainable numbers of cells can now be readily scored.

  16. Assay of 25-hydroxy vitamin D3-1 alpha-hydroxylase in pig kidney mitochondria using isotope dilution-mass spectrometry

    SciTech Connect

    Holmberg, I.; Saarem, K.; Pedersen, J.I.; Bjoerkhem, I.

    1986-12-01

    An assay of 1 alpha-hydroxylation of 25-hydroxy vitamin D3 in pig kidney mitochondria, based on selected ion monitoring, has been developed. Trideuterium-labeled 1,25-dihydroxy vitamin D3 was synthesized and used as internal standard. This standard was added immediately after incubation of 25-hydroxy vitamin D3 with the mitochondrial fraction. The incubation extracts were purified by high-performance liquid chromatography. After formation of the trimethylsilyl derivative, the product was quantitated by mass fragmentography using the ion at m/z 452 and m/z 455. With the use of this assay it was found that formation of 1,25-dihydroxy vitamin D3 was linear with the amount of mitochondrial protein and time of incubation. Substrate saturation was obtained at about 20 microM of 25-hydroxy vitamin D3. The maximal rate of conversion obtained under the conditions employed was about 0.1 pmol/mg protein X minute.

  17. Quantification of the major urinary metabolite of 15-F2t-isoprostane (8-iso-PGF2alpha) by a stable isotope dilution mass spectrometric assay.

    PubMed

    Morrow, J D; Zackert, W E; Yang, J P; Kurhts, E H; Callewaert, D; Dworski, R; Kanai, K; Taber, D; Moore, K; Oates, J A; Roberts, L J

    1999-05-01

    The isoprostanes (IsoPs) are a series of novel prostaglandin (PG)-like compounds generated from the free radical-catalyzed peroxidation of arachidonic acid. The first series of IsoPs characterized contained F-type prostane rings analogous to PGF2alpha. One F-ring IsoP, 15-F2t-IsoP (8-iso-PGF2alpha) has been shown to be formed in abundance in vivo and to exert potent biological activity. As a means to assess the endogenous production of this compound, we developed a method to quantify the major urinary metabolite of 15-F2t-IsoP, 2,3-dinor-5,6-dihydro-15-F2t-IsoP (2,3-dinor-5, 6-dihydro-8-iso-PGF2alpha), by gas chromotography/negative ion chemical ionization mass spectrometry. This metabolite was chemically synthesized and converted to an 18O2-labeled derivative for use as an internal standard. After purification, the compound was analyzed as a pentafluorobenzyl ester trimethylsilyl ether. Precision of the assay is +/-4% and accuracy is 97%. The lower limit of sensitivity is approximately 20 pg. Levels of the urinary excretion of this metabolite in 10 normal adults were found to be 0. 39 +/- 0.18 ng/mg creatinine (mean +/- 2 SD). Substantial elevations in the urinary excretion of the metabolite were found in situations in which IsoP generation is increased and antioxidants effectively suppressed metabolite excretion. Levels of 2,3-dinor-5, 6-dihydro-15-F2t-IsoP were not affected by cyclooxygenase inhibitors. Thus, this assay provides a sensitive and accurate method to assess endogenous production of 15-F2t-IsoP as a means to explore the pathophysiological role of this compound in human disease.

  18. The physicochemical property characterization of agar acetate.

    PubMed

    Xia, Kai; Liu, Xin; Zhao, Jingkun; Zhang, Xiaodong

    2014-09-22

    A series of agar acetates with different degree of substitution (DS) were prepared, and their properties were determined and analyzed. The results showed that the gelling temperature, the gel melting temperature, the gel strength, the gel hardness, the gel fracturability, the gel springiness and the solution apparent viscosity of agar acetates all decreased except that their gel cohesiveness increased with the increase of DS. The variation process of agar molecules in solution from coil to helix could be also observed by measuring solution optical rotation in a lower concentration at which even the solution could not form a gel. The gel skeleton structures of agar acetates were of porous network structures, and the pores became smaller and denser with the increase of DS. After acetylation, the water holding capacity of the agar was improved, but its thermal stability was lowered.

  19. Drug susceptibility testing by dilution methods.

    PubMed

    Jeannot, Katy; Plésiat, Patrick

    2014-01-01

    Serial twofold dilution methods are widely used to assess the bacteriostatic activities of antibiotics. This can be achieved by dilution of considered drugs in agar medium or in culture broth, and inoculation by calibrated inoculums. Although seemingly simple, these methods are greatly influenced by the experimental conditions used and may lead to discrepant results, in particular with untrained investigators. The present step-by-step protocol has been validated for Pseudomonas species, including P. aeruginosa. Introduction of appropriate control strains is crucial to ascertain minimal inhibitory concentration values and compare the results of independent experiments.

  20. Differentiating non-0157:H7 STEC serogroups from ground beef plated on agar media by hyperspetral imaging

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Introduction: The development of an assay to detect and confirm a positive non-O157:H7 isolate is challenging when mixed morphologically results are obtained from the serogroups growing on Rainbow agar. Rainbow agar is only claimed by the manufacturer to be very specific for E.coli O157:H7 strain...

  1. Some Experiments With Agar-Grown Seedlings

    ERIC Educational Resources Information Center

    Freeland, P. W.

    1973-01-01

    Two percent agar gel is reported as a better medium for germination and growth studies. Students can be encouraged to undertake many simple experiments and make precise observations by using this medium. (PS)

  2. Morphological development of Morchella conica mycelium on different agar media.

    PubMed

    Guler, P; Ozkaya, E G

    2009-07-01

    The present study presents the development of mycelium of Morchella conica where different concentration of sucrose added at different agar media. For this sucrose have been added as 0.25, 0.50, 0.75, 1.00 and 1.25% concentration to wheat agar potato dextrose agar malt extract agar and complete medium yeast agar The radial growth speed, morphologic specifications, radial growth radius and pigmentation of mycelium were taken as criteria, the development period of mycelium in wheat agar was completed in 4 days and mycelium were very thin. The colonization period of the mycelium was determined; 7 days in potato dextrose agar 5 days in malt extract agar and 5 days at complete medium yeast agar. The development of the mycelium; at potato dextrose agar was dense and circular; at malt extract agar and at completed medium yeast agar was rhizomorphic. Mycelium has developed very well at sucrose medium and formed creamy and light yellow pigmentation.

  3. Xanthan gum: an economical partial substitute for agar in microbial culture media.

    PubMed

    Babbar, Shashi B; Jain, Ruchi

    2006-04-01

    Xanthan gum, microbial desiccation-resistant polysaccharide prepared commercially by aerobic submerged fermentation from Xanthomonas campestris, has been successfully used alone and in combination with agar for microbial culture media. As illustrative examples, eight bacteria and eight fungi were grown on media solidified with either agar (A, 1.5%), xanthan gum (X, 1%), or combinations of both (0.9% X + 0.1% A, 0.8% X + 0.2% A, 0.7% X + 0.3% A, 0.6% X + 0.4% A). All fungi and bacteria exhibited normal growth and differentiation in all these treatments. Rather, growth of most of the fungi was better on xanthan (alone) and xanthan + agar media than agar medium. As the media gelled with xanthan gum alone flow, it was not possible to incubate Petri plates in inverted position. Moreover, because of the softness, streaking of bacteria was difficult on such media. However, these problems could be overcome by partially replacing xanthan gum with 0.3% agar. Bacterial enumeration studies carried out for Serratia sp. and Pseudomonas sp. by serial dilution and pour-plate method on agar (1.5%), 0.7%/0.6% X + 0.3%/0.4% A yielded similar counts. Selective media, succinate medium for Pseudomonas sp., and MacConkey broth medium for Escherichia coli gelled with 0.7%/0.6% X + 0.3%/0.4% A did not support growth of other bacteria when inoculated along with the above-mentioned bacteria. Likewise, differential medium, CRMA (Congo red mannitol agar) gelled with xanthan-agar combination could differentiate between Agrobacterium tumefaciens and Rhizobium sp.

  4. Folate content in sea buckthorn berries and related products (Hippophaë rhamnoides L. ssp. rhamnoides): LC-MS/MS determination of folate vitamer stability influenced by processing and storage assessed by stable isotope dilution assay.

    PubMed

    Gutzeit, Derek; Mönch, Sabine; Jerz, Gerold; Winterhalter, Peter; Rychlik, Michael

    2008-05-01

    A stable isotope dilution assay was adopted for quantitation of folate vitamers in sea buckthorn berries, juice, and concentrate using fourfold labeled folate isotopologues of the folate derivatives as the internal standards and reversed-phase liquid chromatography-tandem mass spectrometry with electrospray ionization (LC-ESI-MS/MS). Processing effects and storage stability were investigated during juice and concentrate production from sea buckthorn berries (Hippophaë rhamnoides). The technological processing of the berries caused a total degradation of tetrahydrofolate and 5-formyltetrahydrofolate in the generated juice. The content of the main folate vitamer 5-methyltetrahydrofolate remained approximately unchanged during the whole processing from the berries to the concentrate. Sea buckthorn juice was stored under two household storage conditions (6 degrees C, 25 degrees C), and also under accelerated aging conditions (40 degrees C) for up to 7 days to determine the effects of storage temperature on the stability of 5-methyltetrahydrofolate. The content of 5-methyltetrahydrofolate was nearly unchanged during the storage at 6 degrees C after 7 days. The juice showed almost identical degradation of 5-methyltetrahydrofolate of about 17-20% at 25 degrees C and 40 degrees C after 7 days of storage. [figure: see text

  5. A Collaborative Study: Determination of Mycotoxins in Corn, Peanut Butter, and Wheat Flour Using Stable Isotope Dilution Assay (SIDA) and Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS).

    PubMed

    Zhang, Kai; Schaab, Matthew R; Southwood, Gavin; Tor, Elizabeth R; Aston, Linda S; Song, Wenlu; Eitzer, Brian; Majumdar, Sanghamitra; Lapainis, Theodore; Mai, Huy; Tran, Kevin; El-Demerdash, Aref; Vega, Victor; Cai, Yanxuan; Wong, Jon W; Krynitsky, Alexandra J; Begley, Timothy H

    2017-01-03

    A collaborative study was conducted to evaluate stable isotope dilution assay (SIDA) and LC-MS/MS for the simultaneous determination of aflatoxins B1, B2, G1, and G2; deoxynivalenol; fumonisins B1, B2, and B3; ochratoxin A; HT-2 toxin; T-2 toxin; and zearalenone in foods. Samples were fortified with 12 (13)C uniformly labeled mycotoxins ((13)C-IS) corresponding to the native mycotoxins and extracted with acetonitrile/water (50:50 v/v), followed by centrifugation, filtration, and LC-MS/MS analysis. In addition to certified reference materials, the six participating laboratories analyzed corn, peanut butter, and wheat flour fortified with the 12 mycotoxins at concentrations ranging from 1.0 to 1000 ng/g. Using their available LC-MS/MS platform, each laboratory developed in-house instrumental conditions for analysis. The majority of recoveries ranged from 80 to 120% with relative standard derivations (RSDs) <20%. Greater than 90% of the average recoveries of the participating laboratories were in the range of 90-110%, with repeatability RSDr (within laboratory) < 10% and reproducibility RSDR (among laboratory) < 15%. All Z scores of the results of certified reference materials were between -2 and 2. Using (13)C-IS eliminated the need for matrix-matched calibration standards for quantitation, simplified sample preparation, and achieved simultaneous identification and quantitation of multiple mycotoxins in a simple LC-MS/MS procedure.

  6. Thermodynamics of Dilute Solutions.

    ERIC Educational Resources Information Center

    Jancso, Gabor; Fenby, David V.

    1983-01-01

    Discusses principles and definitions related to the thermodynamics of dilute solutions. Topics considered include dilute solution, Gibbs-Duhem equation, reference systems (pure gases and gaseous mixtures, liquid mixtures, dilute solutions), real dilute solutions (focusing on solute and solvent), terminology, standard states, and reference systems.…

  7. Pigments of fly agaric (Amanita muscaria).

    PubMed

    Stintzing, Florian; Schliemann, Willibald

    2007-01-01

    The complex pigment pattern of fly agaric (Amanita muscaria) cap skins has been studied by LC-DAD and mass spectrometry. Among the betaxanthins the corresponding derivatives of serine, threonine, ethanolamine, alanine, Dopa, phenylalanine and tryptophan are reported for the first time to contribute to the pigment pattern of fly agarics. Betalamic acid, the chromophoric precursor of betaxanthins and betacyanins, muscaflavin and seco-dopas were also detected. Furthermore, the red-purple muscapurpurin and the red muscarubrin were tentatively assigned while further six betacyanin-like components could not be structurally allocated. Stability studies indicated a high susceptibility of pigment extracts to degradation which led to rapid colour loss thus rendering a complete characterization of betacyanin-like compounds impossible at present. Taking into account these difficulties the presented results may be a starting point for a comprehensive characterization of the pigment composition of fly agarics.

  8. Standard operating procedure to prepare agar phantoms

    NASA Astrophysics Data System (ADS)

    Souza, R. M.; Santos, T. Q.; Oliveira, D. P.; Souza, R. M.; Alvarenga, A. V.; Costa-Felix, R. P. B.

    2016-07-01

    Agar phantoms are widely used as soft tissue mimics and some preparation techniques are described in the literature. There are also standards that describe the recipe of a soft tissue mimicking material (TMM). However some details of manufacture process are not clearly defined. The standardization of the phantom's preparation can produce a metrological impact on the results of the acoustic properties measured. In this direction, this paper presents a standard operating procedure (SOP) to prepare the agar TMM described on the IEC 60601-237.

  9. Use of agar agar stabilized milled zero-valent iron particles for in situ groundwater remediation

    NASA Astrophysics Data System (ADS)

    Schmid, Doris; Velimirović, Milica; Wagner, Stephan; Micić Batka, Vesna; von der Kammer, Frank; Hofmann, Thilo

    2015-04-01

    A major obstacle for use of nanoscale zero-valent iron (nZVI) particles as a nontoxic material for effective in situ degradation of chlorinated aliphatic hydrocarbons (CAHs) is the high production cost. For that reason, submicro-scale milled zero-valent iron particles were recently developed (milled ZVI, UVR-FIA, Germany) by grinding macroscopic raw materials of elementary iron as a cheaper alternative to products produced by solid-state reduction. However, milled ZVI particles tend to aggregate and due to the rather large particle size (d50= 11.9 µm) also rapidly sediment. To prevent aggregation and consequently sedimentation of milled ZVI particles and therefore improve the mobility after in situ application, the use of a stabilizer is considered in literature as a most promising option. In this study, milled ZVI particles (1 g L-1 of particle concentration) were stabilized by environmentally friendly polymer agar agar (>0.5 g L-1), which had a positive impact on the milled ZVI stability. Sedimentation rate was significantly decreased by increasing the suspension viscosity. Column transport experiments were performed for bare and agar agar stabilized milled ZVI particles in commercially available fine grained quartz sand (DORSILIT® Nr.8, Gebrüder Dorfner GmbH Co, Germany) and different porous media collected from brownfields. The experiments were carried out under field relevant injection conditions of 100 m d-1. The maximal travel distance (LT) of less than 10 cm was determined for non-stabilized suspension in fine grained quartz sand, while agar agar (1 g L-1) stabilized milled ZVI suspension revealed LT of 12 m. Similar results were observed for porous media from brownfields showing that mobility of agar agar stabilized particle suspensions was significantly improved compared to bare particles. Based on the mobility data, agar agar stabilized milled zero-valent iron particles could be used for in situ application. Finally, lab-scale batch degradation

  10. Dilutions Made Easy.

    ERIC Educational Resources Information Center

    Kamin, Lawrence

    1996-01-01

    Presents problems appropriate for high school and college students that highlight dilution methods. Promotes an understanding of dilution methods in order to prevent the unnecessary waste of chemicals and glassware in biology laboratories. (JRH)

  11. Comparison of the antibacterial activity of chelating agents using the agar diffusion method

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of 2 metal chelators. Concentrations of 0 to 40 mM of ethylenediaminetetraacetic acid (EDTA) and ethylenediamine-N,N’-disuccinic acid (EDDS) were prepared in 1.0 M potassium hydroxide (KOH). The pH of the solutions was adjusted to 1...

  12. Serial Dilution Simulation Lab

    ERIC Educational Resources Information Center

    Keler, Cynthia; Balutis, Tabitha; Bergen, Kim; Laudenslager, Bryanna; Rubino, Deanna

    2010-01-01

    Serial dilution is often a difficult concept for students to understand. In this short dry lab exercise, students perform serial dilutions using seed beads. This exercise helps students gain skill at performing dilutions without using reagents, bacterial cultures, or viral cultures, while being able to visualize the process.

  13. Electrocoalescence based serial dilution of microfluidic droplets.

    PubMed

    Bhattacharjee, Biddut; Vanapalli, Siva A

    2014-07-01

    Dilution of microfluidic droplets where the concentration of a reagent is incrementally varied is a key operation in drop-based biological analysis. Here, we present an electrocoalescence based dilution scheme for droplets based on merging between moving and parked drops. We study the effects of fluidic and electrical parameters on the dilution process. Highly consistent coalescence and fine resolution in dilution factor are achieved with an AC signal as low as 10 V even though the electrodes are separated from the fluidic channel by insulator. We find that the amount of material exchange between the droplets per coalescence event is high for low capillary number. We also observe different types of coalescence depending on the flow and electrical parameters and discuss their influence on the rate of dilution. Overall, we find the key parameter governing the rate of dilution is the duration of coalescence between the moving and parked drop. The proposed design is simple incorporating the channel electrodes in the same layer as that of the fluidic channels. Our approach allows on-demand and controlled dilution of droplets and is simple enough to be useful for assays that require serial dilutions. The approach can also be useful for applications where there is a need to replace or wash fluid from stored drops.

  14. Electrocoalescence based serial dilution of microfluidic droplets

    PubMed Central

    Bhattacharjee, Biddut; Vanapalli, Siva A.

    2014-01-01

    Dilution of microfluidic droplets where the concentration of a reagent is incrementally varied is a key operation in drop-based biological analysis. Here, we present an electrocoalescence based dilution scheme for droplets based on merging between moving and parked drops. We study the effects of fluidic and electrical parameters on the dilution process. Highly consistent coalescence and fine resolution in dilution factor are achieved with an AC signal as low as 10 V even though the electrodes are separated from the fluidic channel by insulator. We find that the amount of material exchange between the droplets per coalescence event is high for low capillary number. We also observe different types of coalescence depending on the flow and electrical parameters and discuss their influence on the rate of dilution. Overall, we find the key parameter governing the rate of dilution is the duration of coalescence between the moving and parked drop. The proposed design is simple incorporating the channel electrodes in the same layer as that of the fluidic channels. Our approach allows on-demand and controlled dilution of droplets and is simple enough to be useful for assays that require serial dilutions. The approach can also be useful for applications where there is a need to replace or wash fluid from stored drops. PMID:25379096

  15. Microfluidic serial dilution ladder.

    PubMed

    Ahrar, Siavash; Hwang, Michelle; Duncan, Philip N; Hui, Elliot E

    2014-01-07

    Serial dilution is a fundamental procedure that is common to a large number of laboratory protocols. Automation of serial dilution is thus a valuable component for lab-on-a-chip systems. While a handful of different microfluidic strategies for serial dilution have been reported, approaches based on continuous flow mixing inherently consume larger amounts of sample volume and chip real estate. We employ valve-driven circulatory mixing to address these issues and also introduce a novel device structure to store each stage of the dilution process. The dilution strategy is based on sequentially mixing the rungs of a ladder structure. We demonstrate a 7-stage series of 1 : 1 dilutions with R(2) equal to 0.995 in an active device area of 1 cm(2).

  16. The mathematics of dilution.

    PubMed

    Chatterjee, Barun Kumar

    2014-04-01

    The major objection to homeopathic medicine is that the doses of medicine prescribed in some cases are too dilute for any active ingredient to be present. The medicines would hence be rendered inactive, necessitating novel explanations for the action. A further examination of dilution in the light of the Langmuir equation shows that homeopathic medicines may not be as dilute as a simplistic application of Avogadro's Principle suggests, due to surface effects.

  17. Multicenter Investigation of Gepotidacin (GSK2140944) Agar Dilution Quality Control Determinations for Neisseria gonorrhoeae ATCC 49226

    PubMed Central

    Fedler, Kelley A.; Scangarella-Oman, Nicole E.; Ross, James E.; Flamm, Robert K.

    2016-01-01

    Gepotidacin, a novel triazaacenaphthylene antibacterial agent, is the first in a new class of type IIA topoisomerase inhibitors with activity against many biothreat and conventional pathogens, including Neisseria gonorrhoeae. To assist ongoing clinical studies of gepotidacin to treat gonorrhea, a multilaboratory quality assurance investigation determined the reference organism (N. gonorrhoeae ATCC 49226) quality control MIC range to be 0.25 to 1 μg/ml (88.8% of gepotidacin MIC results at the 0.5 μg/ml mode). PMID:27161642

  18. Detection of Clarithromycin-Resistant Helicobacter pylori Strains by a Preferential Homoduplex Formation Assay

    PubMed Central

    Maeda, Shin; Yoshida, Haruhiko; Matsunaga, Hironari; Ogura, Keiji; Kawamata, Osamu; Shiratori, Yasushi; Omata, Masao

    2000-01-01

    It has been shown that resistance to clarithromycin, a major cause of failure in Helicobacter pylori eradication therapy, is associated with point mutations in the 23S rRNA gene. We sought to apply the preferential homoduplex formation assay (PHFA), a novel technique for the efficient detection of point mutations, to detection of the mutations. PHFA was performed on streptavidin-coated microtiter plates with biotin- and dinitrophenyl-labeled amplicons to detect the wild-type gene or each mutant gene. DNA samples were extracted from gastric juice specimens of 412 patients with H. pylori infection and were applied to the assay. The detection threshold of PHFA was as few as 10 gene copies. The sensitivity of PHFA for the detection of H. pylori infection was higher than those of culture and the rapid urease test. A total of 337 (81.8%) samples had the wild-type gene, 38 (9.2%) had the A2144G mutation, and 37 (9.0%) contained both the wild type and a mutation (A2144G in 30 samples, A2143G in 5 samples, and A2143G plus A2144G in 2 samples). About half the strains isolated from patients with mixed infection were susceptible by the agar dilution method (MIC, <0.1 mg/liter). Therefore, PHFA can detect clarithromycin-resistant H. pylori strains, even in patients with mixed infections with the wild type, that are not detectable by the agar dilution method. PMID:10618089

  19. Tentative inhibition zone criteria (Bauer-Kirby agar disk diffusion method) for rifampin against staphylococci.

    PubMed

    Traub, W H; Spohr, M; Bauer, D

    1987-01-01

    Two of 359 (0.6%) clinical isolates of Staphylococcus aureus and 12 of 218 (5.5%) clinical isolates of coagulase-negative staphylococci were resistant or of intermediate susceptibility against rifampin as based on minimal inhibitory concentration (MIC) breakpoints obtained with the agar dilution method: MIC greater than or equal to 2 micrograms/ml = resistant; MIC 0.25-1 microgram/ml = intermediate susceptible; MIC less than 0.125 microgram/ml = susceptible. The following inhibition zone criteria with 2 micrograms rifampin disks were proposed for staphylococcal isolates utilizing the Bauer-Kirby agar disk diffusion test: diameter of inhibition zones less than or equal to 13 mm = resistant; diameter 14-21 mm = intermediate susceptible; diameter greater than or equal to 22 mm = susceptible.

  20. Ultrasonic backscatter coefficients for weakly scattering, agar spheres in agar phantoms

    PubMed Central

    King, Michael R.; Anderson, Janelle J.; Herd, Maria-Teresa; Ma, Darryl; Haak, Alexander; Wirtzfeld, Lauren A.; Madsen, Ernest L.; Zagzebski, James A.; Oelze, Michael L.; Hall, Timothy J.; O’Brien, William D.

    2010-01-01

    Applicability of ultrasound phantoms to biological tissue has been limited because most phantoms have generally used strong scatterers. The objective was to develop very weakly scattering phantoms, whose acoustic scattering properties are likely closer to those of tissues and then compare theoretical simulations and experimental backscatter coefficient (BSC) results. The phantoms consisted of agar spheres of various diameters (nominally between 90 and 212 μm), containing ultrafiltered milk, suspended in an agar background. BSC estimates were performed at two institutions over the frequency range 1–13 MHz, and compared to three models. Excellent agreement was shown between the two laboratory results as well as with the three models. PMID:20707460

  1. Comparison of sorbitol MacConkey and hemorrhagic coli agars for recovery of Escherichia coli O157:H7 from brie, ice cream, and whole milk.

    PubMed

    Hammack, T S; Feng, P; Amaguaña, R M; June, G A; Sherrod, P S; Andrews, W H

    1997-01-01

    The relative efficacies of hemorrhagic coli (HC) agar and several formulations of sorbitol MacConkey (SorMac) agar, with and without 0.1% (w/v) 4-methyllumbelliferyl-beta-D-glucuronide (MUG), in recovering unstressed and heat-stressed Escherichia coli O157:H7 from Brie cheese, ice cream, and whole milk were determined. Recovery of unstressed E. coli O157:H7 was determined quantitatively by spread-plating diluted samples onto different agars and performing plate counts. Recovery of stressed E. coli O157:H7 was determined qualitatively by enriching samples in modified trypticase soy broth, streaking the incubated enrichments, and isolating E. coli O157:H7 colonies from the agars. HC agar and the SorMac agar formulations did not differ significantly in their ability to recover unstressed E. coli O157:H7 from ice cream and whole milk; however, HC agar recovered significantly more unstressed E. coli O157:H7 from Brie cheese than did the SorMac agar formulations. Bacteriological Analytical Manual and Oxoid SorMac agar formulations made from individual ingredients, did not differ significantly in recovering unstressed E. coli O157:H7 from Brie cheese. The efficiency of the commercially available Oxoid SorMac agar could not be determined because of overgrowth by indigenous microflora. HC and SorMac agars did not differ significantly in recovering stressed E. coli O157:H7 from Brie cheese, ice cream, and whole milk. MUG had no apparent effect on recovery of either stressed or unstressed E. coli O157:H7 from the dairy foods examined.

  2. Biological treatment of textile dyes by agar-agar immobilized consortium in a packed bed reactor.

    PubMed

    Patel, Yogesh; Gupte, Akshaya

    2015-03-01

    The decolorization of Acid Maroon V was investigated using bacterial consortium EDPA containing Enterobacter dissolvens AGYP1 and Pseudomonas aeruginosa AGYP2 immobilized in different entrapment matrices. The consortium displayed 96% removal of dye (100 mg/l) within 6 h when immobilized in agar-agar. Under optimum concentrations of agar-agar (3.0% w/v) and cell biomass (0.9 g% w/v), the consortium displayed decolorization for 18 successive batches of Acid Maroon V and also decolorized 14 other different textile dyes. A packed bed reactor under batch mode showed 89% decolorization of dye after 56 repetitive cycles. Under continuous flow mode, maximum color removal was achieved with bed length of 36 cm, hydraulic retention time of 2.66 h, and dye concentration of 100 mg/l. Additionally, the reactor decolorized relatively higher concentrations (100-2000 mg/l) of dye. The synthetic dye wastewater containing five textile dyes was decolorized 92% with 62% COD reduction using an immobilized consortium.

  3. Improving agar electrospinnability with choline-based deep eutectic solvents.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-09-01

    Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up. One weight percent agar-in-DES showed improved viscoelasticity and hence, spinnability, when compared to 1 wt% agar-in-water and pure agar nanofibers were successfully electrospun if working above the temperature of sol-gel transition (∼80 °C). By changing the solvent medium we decreased the PVA concentration (5 wt% starting solution) and successfully produced composite fibers with high agar contents (50/50 agar/PVA). Best composite fibers were formed with the 50/50 and 30/70 agar/PVA solutions. These fibers were mechanically resistant, showed tailorable surface roughness and diverse size distributions, with most of the diameters falling in the sub-micron range. Both nano and micro forms of agar fibers (used separately or combined) may have potential for the design of new and highly functional agar-based materials.

  4. Automatic Surface Inoculation of Agar Trays1

    PubMed Central

    Wilkins, Judd R.; Mills, Stacey M.; Boykin, Elizabeth H.

    1972-01-01

    A machine is described which automatically inoculates a plastic tray containing agar media with a culture by use of either a conventional inoculating loop or a cotton swab. Isolated colonies were obtained with an inoculating loop when a heavy inoculum (109 cells/ml) was used or with a cotton swab when a light inoculum (ca. 104 cells/ml) was used. Trays containing combinations of differential or selective media were used to (i) separate mixtures of gram-positive and gram-negative bacteria, (ii) facilitate isolation of organisms from clinical specimens, and (iii) compare colony growth characteristics of pure cultures. The design of the machine is simple, it is easy to use, and it relieves the operator from the manual task of streaking cultures. Images PMID:16349943

  5. Poisoning with brown fly agaric, Amanita regalis.

    PubMed

    Elonen, E; Tarssanen, L; Härkönen, M

    1979-01-01

    Three patients ate different amounts of a common northern mushroom, brown fly agaric, Amanita regalis. All of them believed they had eaten delicious parasol mushrooms, Macrolepiota procera. The symptoms of poisoning began 1--2 hours after ingestion of the mushrooms. All the patients had marked gastrointestinal symptoms: nausea and heavy vomiting. Two had central nervous system manifestations and cholinergic symptoms: hallucinations, confusion, or loss of consciousness as well as copious salivation, or sweating. All patients recovered within 4--24 hours without any damage to liver, kidneys or central nervous system. It seems that cooking the mushrooms does not completely neutralize the toxic agents of Amanita regalis. The analysis of fried mushrooms shows that it may be possible to identify mushrooms reliably from the remains of a meal.

  6. In vitro growth of bioactive nanostructured apatites via agar-gelatin hybrid hydrogel.

    PubMed

    Deng, Yi; Zhao, Xianghui; Zhou, Yongsheng; Zhu, Peizhi; Zhang, Li; Wei, Shicheng

    2013-12-01

    Biomimetic synthesis of bone-like carbonated apatite with good biocompatibility is a promising strategy for the development of novel biomaterials for bone engineering applications. Most research efforts have been focused on only protein-based or only polysaccharide-based template for synthesis of apatite minerals. To understand the cooperative roles of gelatin and polysaccharide playing in the biomineralization, agar hydrogel, gelatin and agar-gelatin hybrid hydrogel were respectively introduced as mineralization matrix for the in vitro growth of apatite in the study. It was shown that bundle-like carbonated apatite was successfully prepared in agar-gelatin hybrid hydrogel for the first time, through the interaction between apatite and matrix macromolecule under physiological temperature. Moreover, the in vitro biocompatibility of the prepared nanostructured apatite crystals was investigated using CCK-8 assay and alkaline phosphatase activity of osteoblast-like MC3T3-E1. Compared with HA synthesized by traditional method, the obtained apatite in agar-gelatin hybrid hydrogel could provide significantly higher cell viability and alkaline phosphatase activity. Through the study, we could better understand the role of gelatin and polysaccharide in bone formation process, and the product is a promising candidate to be used in bone tissue engineering.

  7. Agar media that indicate acid production from sorbitol by oral microorganisms.

    PubMed Central

    Kalfas, S; Edwardsson, S

    1985-01-01

    Two varieties of agar medium (Trypticase [BBL Microbiology Systems]-serum-sorbitol-bromcresol purple agar [TSSB] and Trypticase-blood-sorbitol-CaCO3 agar [TBSCa]) indicating microbial acid production from sorbitol were tested. The media were devised for use in studies on the prevalence of sorbitol-fermenting human oral microorganisms incubated in an anaerobic or microaerophilic atmosphere containing 5 to 6% CO2. TSSB contains bromcresol purple as the pH indicator and NaHCO3 as the main buffering salt. TBSCa contains CaCO3 as both the buffering salt and the indicator of acid production. The growth yield of pure cultures of oral microorganisms on TBSCa was shown to equal that on blood agar incubated under similar conditions. TSSB inhibited the growth of several bacteria to various extents. The recovery of sorbitol-fermenting microorganisms from oral specimens was the greatest when the specimens were assayed with TBSCa. The poorer results obtained with TSSB were mainly due to the decoloration of the pH indicator in this medium and the presence of greater numbers of sorbitol false-positive colonies. Images PMID:2933424

  8. A new effective assay to detect antimicrobial activity of filamentous fungi.

    PubMed

    Pereira, Eric; Santos, Ana; Reis, Francisca; Tavares, Rui M; Baptista, Paula; Lino-Neto, Teresa; Almeida-Aguiar, Cristina

    2013-01-15

    The search for new antimicrobial compounds and the optimization of production methods turn the use of antimicrobial susceptibility tests a routine. The most frequently used methods are based on agar diffusion assays or on dilution in agar or broth. For filamentous fungi, the most common antimicrobial activity detection methods comprise the co-culture of two filamentous fungal strains or the use of fungal extracts to test against single-cell microorganisms. Here we report a rapid, effective and reproducible assay to detect fungal antimicrobial activity against single-cell microorganisms. This method allows an easy way of performing a fast antimicrobial screening of actively growing fungi directly against yeast. Because it makes use of an actively growing mycelium, this bioassay also provides a way for studying the production dynamics of antimicrobial compounds by filamentous fungi. The proposed assay is less time consuming and introduces the innovation of allowing the direct detection of fungal antimicrobial properties against single cell microorganisms without the prior isolation of the active substance(s). This is particularly useful when performing large screenings for fungal antimicrobial activity. With this bioassay, antimicrobial activity of Hypholoma fasciculare against yeast species was observed for the first time.

  9. Microfluidic serial dilution circuit.

    PubMed

    Paegel, Brian M; Grover, William H; Skelley, Alison M; Mathies, Richard A; Joyce, Gerald F

    2006-11-01

    In vitro evolution of RNA molecules requires a method for executing many consecutive serial dilutions. To solve this problem, a microfluidic circuit has been fabricated in a three-layer glass-PDMS-glass device. The 400-nL serial dilution circuit contains five integrated membrane valves: three two-way valves arranged in a loop to drive cyclic mixing of the diluent and carryover, and two bus valves to control fluidic access to the circuit through input and output channels. By varying the valve placement in the circuit, carryover fractions from 0.04 to 0.2 were obtained. Each dilution process, which is composed of a diluent flush cycle followed by a mixing cycle, is carried out with no pipeting, and a sample volume of 400 nL is sufficient for conducting an arbitrary number of serial dilutions. Mixing is precisely controlled by changing the cyclic pumping rate, with a minimum mixing time of 22 s. This microfluidic circuit is generally applicable for integrating automated serial dilution and sample preparation in almost any microfluidic architecture.

  10. Evaluation of performance across the dynamic range of the Abbott RealTime HIV-1 assay as compared to VERSANT HIV-1 RNA 3.0 and AMPLICOR HIV-1 MONITOR v1.5 using serial dilutions of 39 group M and O viruses.

    PubMed

    Swanson, Priscilla; Huang, Shihai; Abravaya, Klara; de Mendoza, Carmen; Soriano, Vincent; Devare, Sushil G; Hackett, John

    2007-04-01

    Performance of the Abbott m2000 instrument system and the Abbott RealTime HIV-1 assay was evaluated using a panel of 37 group M (subtypes A-D, F, G, CRF01_AE, CRF02_AG and unique recombinant forms) and 2 group O virus isolates. Testing was performed on 273 sample dilutions and compared to VERSANT HIV-1 RNA 3.0 (bDNA) and AMPLICOR HIV-1 MONITOR v1.5 (Monitor v1.5) test results. RealTime HIV-1, bDNA, and Monitor v1.5 tests quantified 87%, 78%, and 81% of samples, respectively. RealTime HIV-1 detected an additional 31 samples at < 40 copies/mL. For group M, RealTime HIV-1 dilution profiles and viral loads were highly correlated with bDNA and Monitor v1.5 values; 87% and 89% of values were within 0.5 log(10) copies/mL. In contrast, the group O viruses were not detected by Monitor v1.5 and were substantially underquantified by approximately 2 log(10) copies/mL in bDNA relative to the RealTime HIV-1 assay. Sequence analysis revealed that RealTime HIV-1 primer/probe binding sites are highly conserved and exhibit fewer nucleotide mismatches relative to Monitor v1.5. The automated m2000 system and RealTime HIV-1 assay offer the advantages of efficient sample processing and throughput with reduced "hands-on" time while providing improved sensitivity, expanded dynamic range and reliable quantification of genetically diverse HIV-1 strains.

  11. Selected elements in fly agaric Amanita muscaria.

    PubMed

    Falandysz, J; Kunito, T; Kubota, R; Lipka, K; Mazur, A; Falandysz, Justyna J; Tanabe, S

    2007-09-01

    Concentrations of Ag, Al, Ba, Ca, Cd, Co, Cu, Cr, Cs, Fe, Ga, Hg, K, Mg, Mn, Mo, Na, Pb, Rb, Se, Sb, Sr, V, Tl and Zn have been determined in the whole fruiting bodies, as well as separately in caps and stalks, of fly agaric collected from three geographically distant sites in northern part of Poland. The elements were determined using ICP-MS, ICP-OES, HG-AAS and CV-AAS, respectively. For elements such as Al, Ba, Cr, Fe, Ga, Mo, Mn, Pb, Sb, Sr, Tl, and V concentrations were similar in the caps and stalks, respectively, and for K, Zn, Ag, Ca, Cd, Cu, Hg, Mg, Rb and Se were greater in the caps, while for Co, Cs and Na in the stalks. For Ag, Al, Ba, Ca, Cd, Co, Cr, Cs, Fe, Ga, Hg, Mn, Mo, Pb, Rb, Sb, Sr, Tl and V concentration in the caps showed spatial variations (P<0.05), while for Cu, K, Mg, Na, Se and Zn was independent of the site. The elements such as K with median or mean in the caps between 37,000 and 43,000 microg/g.dm and Mg with 920 and 1,100 microg/g dm were most abundant. Next, within median values range from approximately 100 to 500 microg/g dm were such as Ca, Fe and Al, and in descending order they followed by Rb (100-400 microg/g dm); V, Na, Zn (50-200 microg/g dm); Cu, Mn (10-50 microg/g dm); Cd (10-20 microg/g dm); Se (5 microg/g dm); Ba (<1-3); Cr, Ag, Pb, Sr (<1-2 microg/g dm); Cs, Co, Hg (<1-1 microg/g dm); Ga (<0.5), Sb, Mo and Tl (<0.1 microg/g dm).

  12. Helium dilution refrigeration system

    DOEpatents

    Roach, P.R.; Gray, K.E.

    1988-09-13

    A helium dilution refrigeration system operable over a limited time period, and recyclable for a next period of operation is disclosed. The refrigeration system is compact with a self-contained pumping system and heaters for operation of the system. A mixing chamber contains [sup 3]He and [sup 4]He liquids which are precooled by a coupled container containing [sup 3]He liquid, enabling the phase separation of a [sup 3]He rich liquid phase from a dilute [sup 3]He-[sup 4]He liquid phase which leads to the final stage of a dilution cooling process for obtaining low temperatures. The mixing chamber and a still are coupled by a fluid line and are maintained at substantially the same level with the still cross sectional area being smaller than that of the mixing chamber. This configuration provides maximum cooling power and efficiency by the cooling period ending when the [sup 3]He liquid is depleted from the mixing chamber with the mixing chamber nearly empty of liquid helium, thus avoiding unnecessary and inefficient cooling of a large amount of the dilute [sup 3]He-[sup 4]He liquid phase. 2 figs.

  13. Helium dilution refrigeration system

    DOEpatents

    Roach, Patrick R.; Gray, Kenneth E.

    1988-01-01

    A helium dilution refrigeration system operable over a limited time period, and recyclable for a next period of operation. The refrigeration system is compact with a self-contained pumping system and heaters for operation of the system. A mixing chamber contains .sup.3 He and .sup.4 He liquids which are precooled by a coupled container containing .sup.3 He liquid, enabling the phase separation of a .sup.3 He rich liquid phase from a dilute .sup.3 He-.sup.4 He liquid phase which leads to the final stage of a dilution cooling process for obtaining low temperatures. The mixing chamber and a still are coupled by a fluid line and are maintained at substantially the same level with the still cross sectional area being smaller than that of the mixing chamber. This configuration provides maximum cooling power and efficiency by the cooling period ending when the .sup.3 He liquid is depleted from the mixing chamber with the mixing chamber nearly empty of liquid helium, thus avoiding unnecessary and inefficient cooling of a large amount of the dilute .sup.3 He-.sup.4 He liquid phase.

  14. Dilution Zone Mixing

    NASA Technical Reports Server (NTRS)

    Holdeman, J. D.

    1983-01-01

    Studies to characterize dilution zone mixing; experiments on the effects of free-stream turbulence on a jet in crossflow; and the development of an interactive computer code for the analysis of the mixing of jets with a confined crossflow are reviewed.

  15. Dilution, Concentration, and Flotation

    ERIC Educational Resources Information Center

    Liang, Ling; Schmuckler, Joseph S.

    2004-01-01

    As both classroom teaching practice and literature show, many students have difficulties learning science concepts such as density. Here are some investigations that identify the relationship between density and floating through experimenting with successive dilution of a liquid, or the systematic change of concentration of a saltwater solution.…

  16. Comparison of inhibitory mold agar to Sabouraud dextrose agar as a primary medium for isolation of fungi.

    PubMed

    Scognamiglio, Theresa; Zinchuk, Riva; Gumpeni, Pramod; Larone, Davise H

    2010-05-01

    Clinical specimens cultured on two selective fungal media, inhibitory mold agar (IMA) and Sabouraud dextrose agar (SDA), were compared with respect to recovery of fungi. Of the 840 fungal isolates recovered, 69.3% grew on both IMA and SDA; 24.9% grew only on IMA; and 5.8% grew only on SDA, showing that IMA is superior (P=0.003).

  17. Differentiation of Candida dubliniensis from Candida albicans on rosemary extract agar and oregano extract agar.

    PubMed

    de Loreto, Erico Silva; Pozzatti, Patrícia; Alves Scheid, Liliane; Santurio, Deise; Morais Santurio, Janio; Alves, Sydney Hartz

    2008-01-01

    Candida dubliniensis is a recently described pathogenic species which shares many phenotypic features with Candida albicans and therefore, may be misidentified in microbiological laboratories. Because molecular methods can be onerous and unfeasible in routine mycological laboratories with restricted budgets such as those in developing countries, phenotypic techniques have been encouraged in the development of differential media for the presumptive identification of these species. We examined the colony morphology and chlamydospore production of 30 C. dubliniensis isolates and 100 C. albicans isolates on two new proposed media: rosemary (Rosmarinus officinalis) extract agar (REA) and oregano (Origanum vulgare) extract agar (OEA). These substrates are traditionally used as spices and medicinal herbs. In both of these media, all C. dubliniensis isolates (100%) showed rough colonies with peripheral hyphal fringes and abundant chlamydospores after 24 to 48 hr of incubation at 25 degrees C. In contrast, under the same conditions, all isolates of C. albicans (100%) showed smooth colonies without hyphal fringes or chlamydospores. In conclusion, REA and OEA offer a simple, rapid, and inexpensive screening media for the differentiation of C. albicans and C. dubliniensis.

  18. "Dilute-and-inject" multi-target screening assay for highly polar doping agents using hydrophilic interaction liquid chromatography high resolution/high accuracy mass spectrometry for sports drug testing.

    PubMed

    Görgens, Christian; Guddat, Sven; Orlovius, Anne-Katrin; Sigmund, Gerd; Thomas, Andreas; Thevis, Mario; Schänzer, Wilhelm

    2015-07-01

    In the field of LC-MS, reversed phase liquid chromatography is the predominant method of choice for the separation of prohibited substances from various classes in sports drug testing. However, highly polar and charged compounds still represent a challenging task in liquid chromatography due to their difficult chromatographic behavior using reversed phase materials. A very promising approach for the separation of hydrophilic compounds is hydrophilic interaction liquid chromatography (HILIC). Despite its great potential and versatile advantages for the separation of highly polar compounds, HILIC is up to now not very common in doping analysis, although most manufacturers offer a variety of HILIC columns in their portfolio. In this study, a novel multi-target approach based on HILIC high resolution/high accuracy mass spectrometry is presented to screen for various polar stimulants, stimulant sulfo-conjugates, glycerol, AICAR, ethyl glucuronide, morphine-3-glucuronide, and myo-inositol trispyrophosphate after direct injection of diluted urine specimens. The usage of an effective online sample cleanup and a zwitterionic HILIC analytical column in combination with a new generation Hybrid Quadrupol-Orbitrap® mass spectrometer enabled the detection of highly polar analytes without any time-consuming hydrolysis or further purification steps, far below the required detection limits. The methodology was fully validated for qualitative and quantitative (AICAR, glycerol) purposes considering the parameters specificity; robustness (rRT < 2.0%); linearity (R > 0.99); intra- and inter-day precision at low, medium, and high concentration levels (CV < 20%); limit of detection (stimulants and stimulant sulfo-conjugates < 10 ng/mL; norfenefrine; octopamine < 30 ng/mL; AICAR < 10 ng/mL; glycerol 100 μg/mL; ETG < 100 ng/mL); accuracy (AICAR 103.8-105.5%, glycerol 85.1-98.3% at three concentration levels) and ion suppression/enhancement effects.

  19. Effect of water structure on gelation of agar in glycerol solutions and phase diagram of agar organogels.

    PubMed

    Boral, Shilpi; Bohidar, H B

    2012-06-21

    A comprehensive study of hydration of polyanionic agar molecules in its solution and gel phase in glycerol-water binary solvent is reported. Raman spectroscopy results predict differential water structure arrangement for glycerol-water binary solvent, 0.02% (w/v) agar in glycerol solution and 0.3% (w/v) agar organogel. The 3200 cm(-1) Raman band pertaining to ice-like structure of water was found to increase in gel phase alike in glycerol-water solvent while it decreased in agar solutions with increase in glycerol concentration. In contrast, the partially structured water corresponding to the component 3310 cm(-1) of Raman spectra increased in agar solution, and decreased in gel phase similar to glycerol-water solvent case. We have explained these observations based on a simple model where the available oxygen to hydrogen atom ratio in a given solvent-polymer system uniquely defines hydration in solution and gel phases. The gelation concentration was found to increase from 0.18 (for water) to 0.22% (w/v) (50% v/v glycerol solution) as the glycerol concentration was raised. Correspondingly, the gelation temperature, T(g), showed a decline from 40 to 20 °C, and the gel melting temperature, T(m), revealed a reduction from 81 to 65 °C in the same glycerol concentration regime. Two distinctive features are evident here: (i) presence of glycerol as a cosolvent does not favor the gelation of agar as compared to water and (ii) agar organogels are softer than their hydrogels. A unique 3D phase diagram for the agar organogel is proposed. Circular dichroism data confirmed that the agar molecules retained their biological activity in these solvents. Thus, it is shown that thermo-mechanical properties of these organogels could be systematically tuned and adapted as per application requirement.

  20. Selection of brain metastasis-initiating breast cancer cells determined by growth on hard agar.

    PubMed

    Guo, Lixia; Fan, Dominic; Zhang, Fahao; Price, Janet E; Lee, Ju-Seog; Marchetti, Dario; Fidler, Isaiah J; Langley, Robert R

    2011-05-01

    An approach that facilitates rapid isolation and characterization of tumor cells with enhanced metastatic potential is highly desirable. Here, we demonstrate that plating GI-101A human breast cancer cells on hard (0.9%) agar selects for the subpopulation of metastasis-initiating cells. The agar-selected cells, designated GI-AGR, were homogeneous for CD44(+) and CD133(+) and five times more invasive than the parental GI-101A cells. Moreover, mice injected with GI-AGR cells had significantly more experimental brain metastases and shorter overall survival than did mice injected with GI-101A cells. Comparative gene expression analysis revealed that GI-AGR cells were markedly distinct from the parental cells but shared an overlapping pattern of gene expression with the GI-101A subline GI-BRN, which was generated by repeated in vivo recycling of GI-101A cells in an experimental brain metastasis model. Data mining on 216 genes shared between GI-AGR and GI-BRN breast cancer cells suggested that the molecular phenotype of these cells is consistent with that of cancer stem cells and the aggressive basal subtype of breast cancer. Collectively, these results demonstrate that analysis of cell growth in a hard agar assay is a powerful tool for selecting metastasis-initiating cells in a heterogeneous population of breast cancer cells, and that such selected cells have properties similar to those of tumor cells that are selected based on their potential to form metastases in mice.

  1. Cross-validated stable-isotope dilution GC-MS and LC-MS/MS assays for monoacylglycerol lipase (MAGL) activity by measuring arachidonic acid released from the endocannabinoid 2-arachidonoyl glycerol.

    PubMed

    Kayacelebi, Arslan Arinc; Schauerte, Celina; Kling, Katharina; Herbers, Jan; Beckmann, Bibiana; Engeli, Stefan; Jordan, Jens; Zoerner, Alexander A; Tsikas, Dimitrios

    2017-03-15

    2-Arachidonoyl glycerol (2AG) is an endocannabinoid that activates cannabinoid (CB) receptors CB1 and CB2. Monoacylglycerol lipase (MAGL) inactivates 2AG through hydrolysis to arachidonic acid (AA) and glycerol, thus modulating the activity at CB receptors. In the brain, AA released from 2AG by the action of MAGL serves as a substrate for cyclooxygenases which produce pro-inflammatory prostaglandins. Here we report stable-isotope GC-MS and LC-MS/MS assays for the reliable measurement of MAGL activity. The assays utilize deuterium-labeled 2AG (d8-2AG; 10μM) as the MAGL substrate and measure deuterium-labeled AA (d8-AA; range 0-1μM) as the MAGL product. Unlabelled AA (d0-AA, 1μM) serves as the internal standard. d8-AA and d0-AA are extracted from the aqueous buffered incubation mixtures by ethyl acetate. Upon solvent evaporation the residue is reconstituted in the mobile phase prior to LC-MS/MS analysis or in anhydrous acetonitrile for GC-MS analysis. LC-MS/MS analysis is performed in the negative electrospray ionization mode by selected-reaction monitoring the mass transitions [M-H](-)→[M-H - CO2](-), i.e., m/z 311→m/z 267 for d8-AA and m/z 303→m/z 259 for d0-AA. Prior to GC-MS analysis d8-AA and d0-AA were converted to their pentafluorobenzyl (PFB) esters by means of PFB-Br. GC-MS analysis is performed in the electron-capture negative-ion chemical ionization mode by selected-ion monitoring the ions [M-PFB](-), i.e., m/z 311 for d8-AA and m/z 303 for d0-AA. The GC-MS and LC-MS/MS assays were cross-validated. Linear regression analysis between the concentration (range, 0-1μM) of d8-AA measured by LC-MS/MS (y) and that by GC-MS (x) revealed a straight line (r(2)=0.9848) with the regression equation y=0.003+0.898x, indicating a good agreement. In dog liver, we detected MAGL activity that was inhibitable by the MAGL inhibitor JZL-184. Exogenous eicosatetraynoic acid is suitable as internal standard for the quantitative determination of d8-AA produced from d8

  2. Use of agar/glycerol and agar/glycerol/water as a translucent brain simulant for ballistic testing.

    PubMed

    Falland-Cheung, Lisa; Waddell, J Neil; Lazarjan, Milad Soltanipour; Jermy, Mark C; Winter, Taylor; Tong, Darryl; Brunton, Paul A

    2017-01-01

    The suitability of agar/glycerol/water and agar/glycerol mixtures as brain simulants was investigated. Test specimens (n=15) (50x27×37mm) were fabricated for these different mixtures and conditioned to 12°C, 22°C, and 26°C prior to testing. For comparison, fresh deer brain specimens (n=20) were sourced and prepared to the same dimensions as the agar/glycerol(/water) mixtures and conditioned to 12°C and 37°C. High impact tests were carried out with a 0.22-caliber air rifle pellet and a high-speed camera was used to record the projectile as it passed through the specimens, allowing for energy loss and vertical displacement velocity calculation. Although the agar/glycerol/water mixture presented with similar vertical expansion and contraction of the specimens to the warm and cold deer brains, a two-fold decrease of the vertical expansion and contraction was noticed with the agar/glycerol specimens. Also considerably less extrusion of this mixture out of the exit and entry sides after specimen penetration was observed. Of the simulants tested, agar/glycerol/water was the most suitable brain simulant for ballistic testing and impact studies.

  3. Planning a serial dilution test with multiple dilutions.

    PubMed

    Blodgett, Robert J

    2009-06-01

    The dilutions used in a serial dilution test determine which concentrations it can estimate well. Two criteria help to select how many and which dilutions to use. The first criterion is a low probability of outcomes with either all growth or all non-growth tubes at the concentrations of interest. The second criterion considers how far the estimated concentration (MPN) is likely to be from the actual concentration.

  4. Hyperspectral imaging for detecting pathogens grown on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung Chul; Lawrence, Kurt C.; Siragusa, Gregory R.; Line, John E.; Park, Bosoon; Windham, William R.

    2007-09-01

    This paper is concerned with the development of a hyperspectral imaging technique for detecting and identifying one of the most common foodborne pathogens, Campylobacter. Direct plating using agars is an effective tool for laboratory tests and analyses of microorganisms. The morphology (size, growth pattern, color, etc.) of colonies grown on agar plates has been widely used to tentatively differentiate organisms. However, it is sometimes difficult to differentiate target organisms like Campylobacters from other contaminants grown together on the same agar plates. A hyperspectral imaging system operating at the visible and near infrared (VNIR) spectral region from 400 nm to 900 nm was set up to measure spectral signatures of 17 different Campylobacter and non-Campylobacter subspecies. Protocols for culturing, imaging samples and for calibrating measured data were developed. The VNIR spectral library of all 17 organisms commonly encountered in poultry was established from calibrated hyperspectral images. A classification algorithm was developed to locate and identify Campylobacters, non-Campylobacter contaminants, and background agars with 99.29% accuracy. This research has a potential to be expanded to detect other pathogens grown on agar media.

  5. Dilution jet mixing program

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Coleman, E.; Johnson, K.

    1984-01-01

    Parametric tests were conducted to quantify the mixing of opposed rows of jets (two-sided injection) in a confined cross flow. Results show that jet penetrations for two sided injections are less than that for single-sided injections, but the jet spreading rates are faster for a given momentum ratio and orifice plate. Flow area convergence generally enhances mixing. Mixing characteristics with asymmetric and symmetric convergence are similar. For constant momentum ratio, the optimum S/H(0) with in-line injections is one half the optimum value for single sided injections. For staggered injections, the optimum S/H(0) is twice the optimum value for single-sided injection. The correlations developed predicted the temperature distributions within first order accuracy and provide a useful tool for predicting jet trajectory and temperature profiles in the dilution zone with two-sided injections.

  6. Enhanced chlorine resistance of tap water-adapted Legionella pneumophila as compared with agar medium-passaged strains.

    PubMed

    Kuchta, J M; States, S J; McGlaughlin, J E; Overmeyer, J H; Wadowsky, R M; McNamara, A M; Wolford, R S; Yee, R B

    1985-07-01

    Previous studies have shown that bacteria maintained in a low-nutrient "natural" environment such as swimming pool water are much more resistant to disinfection by various chemical agents than strains maintained on rich media. In the present study a comparison was made of the chlorine (Cl2) susceptibility of hot-water tank isolates of Legionella pneumophila maintained in tap water and strains passaged on either nonselective buffered charcoal-yeast extract or selective differential glycine-vancomycin-polymyxin agar medium. Our earlier work has shown that environmental and clinical isolates of L. pneumophila maintained on agar medium are much more resistant to Cl2 than coliforms are. Under the present experimental conditions (21 degrees C, pH 7.6 to 8.0, and 0.25 mg of free residual Cl2 per liter, we found the tap water-maintained L. pneumophila strains to be even more resistant than the agar-passaged isolates. Under these conditions, 99% kill of tap water-maintained strains of L. pneumophila was usually achieved within 60 to 90 min compared with 10 min for agar-passaged strains. Samples from plumbing fixtures in a hospital yielded legionellae which were "super"-chlorine resistant when assayed under natural conditions. After one agar passage their resistance dropped to levels of comparable strains which had not been previously exposed to additional chlorination. These studies more closely approximate natural conditions than our previous work and show that tap water-maintained L. pneumophila is even more resistant to Cl2 than its already resistant agar medium-passaged counterpart.

  7. Fly agaric (Amanita muscaria) poisoning, case report and review.

    PubMed

    Satora, Leszek; Pach, Dorota; Butryn, Beata; Hydzik, Piotr; Balicka-Slusarczyk, Barbara

    2005-06-01

    Gathering and eating mushrooms and other plants containing psychoactive substances has become increasingly popular among young people experimenting with drugs. Dried fly agaric Amanita muscaria fruiting bodies were eaten by five young persons (18-21 years of age) at a party in order to evoke hallucinations. Visual and auditory hallucinations occurred in four of them, whereas a 18-year-old girl lost consciousness. The following morning, she went to the Clinic of Toxicology. Due to the fact that not all the active substances present in the fly agaric have been identified, and some of them have an effect after a period of latency, the patient was admitted for several days of observation during which check-up examinations were performed. After four days without any problems, she was discharged. The poisoning regressed with no organ complications. The remaining persons who had eaten the fly agaric were free from any complaints.

  8. Quenching of the antibacterial activity of chlorhexidine and benzalkonium by Letheen broth and Letheen agar in relation to wild-type and envelope mutant strains of gram-negative bacteria.

    PubMed

    el-Falaha, B M; Furr, J R; Russell, A D

    1987-01-01

    Letheen broth and Letheen agar have been investigated for their ability to act as neutralising and recovery media for wild-type and envelope mutants exposed to chlorhexidine diacetate and benzalkonium chloride. At high dilutions, untreated cells of the envelope mutant of Pseudomonas aeruginosa 799/61 were unable to produce colonies on Letheen agar. As a result of various procedures, it was concluded that dilution in Letheen broth and plating in Isosensitest agar was a suitable method for quenching cationic bactericides without harming the test strains, and that the increasing use of Gram-negative bacteria with outer membrane defects means that considerable care may be necessary in selecting media for evaluating bactericidal activity.

  9. Lysine-iron agar in the detection of Arizona cultures.

    PubMed

    EDWARDS, P R; FIFE, M A

    1961-11-01

    A lysine-iron agar is described and recommended for the detection of Arizona strains which ferment lactose rapidly. Black colonies which appear on bismuth sulfite agar should be transferred to the medium. Salmonellae and Arizona cultures produce a distinctive reaction since they are the only recognized groups of enteric bacteria which regularly produce lysine decarboxylase rapidly and form large amounts of hydrogen sulfide. Use of the medium is particularly recommended in the examination of specimens from enteric infections in which shigellae and salmonellae are not detected.

  10. Method for Measuring Changes in Surface Tension on Agar

    PubMed Central

    Weisberg, David S.; Dworkin, Martin

    1983-01-01

    The surface tension of agar surfaces was determined by measuring the contact angles formed by drops of various hydrophobic liquids on the surface and then calculating the composite surface free energy function by solving a series of simultaneous equations derived from these data. This method was used to measure the change in the surface tension of agar produced by the addition of various concentrations of albumin. The resulting curve was typical of the effect of increasing concentrations of surfactants on surface tension. The method was compared with other methods of determining surface tension of solids, and it was concluded that the technique used here provided the most reliable results. PMID:16346273

  11. DETERMINATION OF THE MAXIMUM INHIBITORY DILUTION OF CETYLPYRIDINIUM CHLORIDE-BASED MOUTHWASHES AGAINST STAPHYLOCOCCUS AUREUS: AN IN VITRO STUDY

    PubMed Central

    Watanabe, Evandro; Tanomaru, Juliane Maria Guerreiro; Nascimento, Andresa Piacezzi; Matoba, Fumio; Tanomaru, Mario; Ito, Izabel Yoko

    2008-01-01

    The aim of this in vitro study was to determine the maximum inhibitory dilution (MID) of four cetylpyridinium chloride (CPC)-based mouthwashes: CPC+Propolis, CPC+Malva, CPC+Eucaliptol+Juá+Romã+Propolis (Natural Honey®) and CPC (Cepacol®), against 28 Staphylococcus aureus field strains, using the agar dilution method. Decimal dilutions ranging from 1/10 to 1/ 655,360 were prepared and added to Mueller Hinton Agar. Strains were inoculated using Steers multipoint inoculator. The inocula were seeded onto the surface of the culture medium in Petri dishes containing different dilutions of the mouthwashes. The dishes were incubated at 37°C for 24 h. For readings, the MID was considered as the maximum dilution of mouthwash still capable of inhibiting microbial growth. The obtained data showed that CPC+Propolis had antimicrobial activity against 27 strains at 1/320 dilution and against all 28 strains at 1/160 dilution, CPC+Malva inhibited the growth of all 28 strains at 1/320 dilution, CPC+Eucaliptol+Juá+Romã+Propolis inhibited the growth of 2 strains at 1/640 dilution and all 28 strains at 1/320 dilution, and Cepacol® showed antimicrobial activity against 3 strains at 1/320 dilution and against all 28 strains at 1/160 dilution. Data were submitted to Kruskal-Wallis test, showing that the MID of Cepacol® was lower than that determined for the other products (p<0.05). In conclusion, CPC-mouthwashes showed antimicrobial activity against S. aureus and the addition of other substances to CPC improved its antimicrobial effect. PMID:19089260

  12. Agar disk diffusion (Bauer-Kirby) tests with various fastidious and nonfastidious reference (ATCC) strains: comparison of several agar media.

    PubMed

    Traub, W H; Leonhard, B

    1994-01-01

    Several agar media (Mueller-Hinton agar, MHA; diagnostic sensitivity test agar, DSTA; Schaedler agar, SchA; Todd-Hewitt agar with added yeast extract, THYA; Wilkins-Chalgren agar, WCA) were compared using the Bauer-Kirby agar disk diffusion test against six nonfastidious quality control strains: Staphylococcus aureus ATCC 25923 and ATCC 29213, Escherichia coli ATCC 25922 and ATCC 35218, Pseudomonas aeruginosa ATCC 27853, and Enterococcus faecalis ATCC 29212. MHA, DSTA, and THYA yielded essentially comparable inhibition zones. However, WCA and SchA antagonized cotrimoxazole and aminoglycoside antibiotics; furthermore, SchA antagonized polymyxin B, and both WCA and SchA antagonized imipenem against the P. aeruginosa strain, but not against the E. coli strains. Sheep blood-MHA (Bl-MHA), WCA, THYA, and DSTA were examined with Streptococcus pyogenes ATCC 19615, Streptococcus agalactiae ATCC 13813, and Streptococcus pneumoniae ATCC 6306. In comparison with Bl-MHA, both WCA and THYA yielded comparable inhibition zones against S. pyogenes; DSTA afforded suboptimal growth. DSTA yielded larger inhibition zones with the majority of antimicrobial drugs against S. agalactiae, whereas WCA and THYA enhanced the activity of oxacillin and penicillin G against this strain. S. pneumoniae strain ATCC 6306 grew well on Bl-MHA, yielded suboptimal growth on WCA and faint growth on THYA, and failed to grow on DSTA. Chocolate-supplemented sheep blood-MHA (CHOC-MHA) was compared with Haemophilus test medium (HTM), WCA with added NAD, and THYA with added hematin and NAD against Haemophilus influenzae strains ATCC 35056 and ATCC 49247. The activities of doxycycline and rifampin were enhanced against both strains by HTM, WCA+NAD, and THYA+hematin+NAD. Only WCA+NAD antagonized cotrimoxazole against both H. influenzae strains, an effect due to thymidine; however, HTM antagonized cotrimoxazole against S. aureus ATCC 25923 and E. coli ATCC 25922. It was concluded that Bl-MHA performed best for

  13. Stress in dilute suspensions

    NASA Technical Reports Server (NTRS)

    Passman, Stephen L.

    1989-01-01

    Generally, two types of theory are used to describe the field equations for suspensions. The so-called postulated equations are based on the kinetic theory of mixtures, which logically should give reasonable equations for solutions. The basis for the use of such theory for suspensions is tenuous, though it at least gives a logical path for mathematical arguments. It has the disadvantage that it leads to a system of equations which is underdetermined, in a sense that can be made precise. On the other hand, the so-called averaging theory starts with a determined system, but the very process of averaging renders the resulting system underdetermined. A third type of theory is proposed in which the kinetic theory of gases is used to motivate continuum equations for the suspended particles. This entails an interpretation of the stress in the particles that is different from the usual one. Classical theory is used to describe the motion of the suspending medium. The result is a determined system for a dilute suspension. Extension of the theory to more concentrated systems is discussed.

  14. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  15. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  16. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  17. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  18. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  19. Improving agar electrospinnability with choline-based deep eutectic solvents

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  20. An improved agar medium for growth of Geobacillus thermoglucosidarius strains.

    PubMed

    Javed, M; Baghaei-Yazdi, N; Qin, W; Amartey, S

    2017-01-01

    Geobacillus species have potential applications in many biotechnological processes. They are fastidious in their vitamin and amino acid requirements. A new semi-defined agar medium (SDM) was developed which gave consistently high viable cell counts of various G. thermoglucosidasius strains (5×10(8)-6×10(8)cfu/ml) under aerobic conditions at 70°C.

  1. [Modification of the lysine-iron agar (author's transl)].

    PubMed

    Wauters, G

    1975-12-01

    The addition of L-phenylalanine to the lysine-iron agar described by Edwards and Fife ]1] allows a more valuable screening of the Proteus group based on its deamination properties. Some minor modifications of the indicator and thiosulfate content lead to improve and earlier recording of the results.

  2. Quantitation of 4-Methyl-4-sulfanylpentan-2-one (4MSP) in Hops by a Stable Isotope Dilution Assay in Combination with GC×GC-TOFMS: Method Development and Application To Study the Influence of Variety, Provenance, Harvest Year, and Processing on 4MSP Concentrations.

    PubMed

    Reglitz, Klaas; Steinhaus, Martin

    2017-03-22

    A stable isotope dilution assay was developed for quantitation of 4-methyl-4-sulfanylpentan-2-one (4MSP) in hops. The approach included the use of 4-((13)C)methyl-4-sulfanyl(1,3,5-(13)C3)pentan-2-one as internal standard, selective isolation of hop thiols by mercurated agarose, and GC×GC-TOFMS analysis. Application of the method to 53 different hop samples revealed 4MSP concentrations between <1 and 114 μg/kg. Notably high concentrations were associated with United States varieties such as Citra, Eureka, Simcoe, and Apollo, whereas 4MSP was absent from traditional German and English varieties. Further experiments showed that besides the variety, also harvest year and storage vitally influenced 4MSP concentrations, whereas the impact of provenance was less pronounced. Hop processing such as drying and pelletizing had only a minor impact on 4MSP concentrations. Like the majority of other hop volatiles, 4MSP is predominantly located in the lupulin glands.

  3. Morphometric and colorimetric analyses of human tumor cell line growth and drug sensitivity in soft agar culture.

    PubMed

    Alley, M C; Pacula-Cox, C M; Hursey, M L; Rubinstein, L R; Boyd, M R

    1991-02-15

    Previous studies have demonstrated the suitability of image analysis of tetrazolium-stained colonies to assess growth and drug sensitivity of human tumor cells cultivated in soft agar culture. In the present study, the potential utility of colorimetric analysis to expedite experimental drug evaluations using human tumor cell lines was investigated. The same culture dishes were assessed by image analysis and by formazan colorimetry for purposes of comparing multiple methods of measuring growth as well as growth inhibition. Replicate cultures treated with 2-(p-iodonitrophenyl)-3-p-nitrophenyl-5-phenyltetrazolium chloride or 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide exhibited nearly identical colony count and volume indices as well as excellent correlation in colorimetric end points. Colony-forming unit volume analysis versus colorimetric assessment of the same cultures following dimethyl sulfoxide extraction of protamine sulfate-rinsed, dried soft agar cultures exhibited excellent linear correlation for both growth (Pearson r ranging from 0.95 to 1.00) and drug sensitivity (Pearson r ranging from 0.90 to 0.99, and Spearman r ranging from 0.82 to 0.97) and similar drug sensitivity profiles. Results of the current investigation indicate that end points of soft agar culture remain stable for a period of at least 2 weeks following assay termination. In addition, a colorimetric detection range of 1.3-2.2 log units permits determinations of survival levels ranging from 100 to 5% of respective control levels. Colorimetric analysis is anticipated to expedite soft agar colony formation assay evaluations (a) by reducing the need to use the more rigorous and time-consuming image analysis procedures to measure activity in preliminary drug sensitivity assays and (b) by permitting the determination of effective concentration ranges of new experimental agents for subsequent, more detailed investigations.

  4. Thermal-induced ageing of agar solutions: impact on the structural and mechanical properties of agar gels

    NASA Astrophysics Data System (ADS)

    Mao, Bosi; Bentaleb, Ahmed; Louerat, Frédéric; Divoux, Thibaut; Snabre, Patrick

    Numerous hydrogels are prepared by cooling down to ambient temperature, aqueous polymer solutions brought to a boil. Although the incubation time of the polymer solution at such a high temperature could be used as a tuning parameter, its impact on the subsequent gelation has been poorly investigated. Here we study the effect of prolonged heating at 80°C on a 1.5% wt solution of agar, a natural polysaccharide. The incubation time is varied from a few hours up to five days. We show that the agar sol. continuously degrades as the result of both the hydrolysis and the intermolecular oxidation of the polymer chains. Furthermore, electronic microscopy and X-ray diffraction experiments reveal that gels formed from older agar sols display an increasingly coarser microstructure composed of micron-sized aggregated pieces of polysaccharides, in contrast with the fibrous-like structure of gels made from fresh sols. Along with structural changes prolonged incubation time leads to weaker gels of lower shear elastic modulus. Finally, macro-indentation experiments coupled to direct visualization show that increasing the incubation time of the agar sol. decreases the yield strain of the gel by a factor of three, while the rupture scenario turns continuously from brittle to ductile-like. Acknowledging funding from BioMérieux & CNRS.

  5. Development of a selective agar plate for the detection of Campylobacter spp. in fresh produce.

    PubMed

    Yoo, Jin-Hee; Choi, Na-Young; Bae, Young-Min; Lee, Jung-Su; Lee, Sun-Young

    2014-10-17

    This study was conducted to develop a selective medium for the detection of Campylobacter spp. in fresh produce. Campylobacter spp. (n=4), non-Campylobacter (showing positive results on Campylobacter selective agar) strains (n=49) isolated from fresh produce, indicator bacteria (n=13), and spoilage bacteria isolated from fresh produce (n=15) were plated on four Campylobacter selective media. Bolton agar and modified charcoal cefoperazone deoxycholate agar (mCCDA) exhibited higher sensitivity for Campylobacter spp. than did Preston agar and Hunt agar, although certain non-Campylobacter strains isolated from fresh produce by using a selective agar isolation method, were still able to grow on Bolton agar and mCCDA. To inhibit the growth of non-Campylobacter strains, Bolton agar and mCCDA were supplemented with 5 antibiotics (rifampicin, polymyxin B, sodium metabisulfite, sodium pyruvate, ferrous sulfate) and the growth of Campylobacter spp. (n=7) and non-Campylobacter strains (n=44) was evaluated. Although Bolton agar supplemented with rifampicin (BR agar) exhibited a higher selectivity for Campylobacter spp. than did mCCDA supplemented with antibiotics, certain non-Campylobacter strains were still able to grow on BR agar (18.8%). When BR agar with various concentrations of sulfamethoxazole-trimethoprim were tested with Campylobacter spp. (n=8) and non-Campylobacter (n=7), sulfamethoxazole-trimethoprim was inhibitory against 3 of 7 non-Campylobacter strains. Finally, we validated the use of BR agar containing 50mg/L sulfamethoxazole (BRS agar) or 0.5mg/L ciprofloxacin (BRCS agar) and other selective agars for the detection of Campylobacter spp. in chicken and fresh produce. All chicken samples were positive for Campylobacter spp. when tested on mCCDA, BR agar, and BRS agar. In fresh produce samples, BRS agar exhibited the highest selectivity for Campylobacter spp., demonstrating its suitability for the detection of Campylobacter spp. in fresh produce.

  6. ON-DEMAND SERIAL DILUTION USING QUANTIZED NANO/PICOLITER-SCALE DROPLETS

    SciTech Connect

    Jambovane, Sachin R.; Prost, Spencer A.; Sheen, Allison M.; Magnuson, Jon K.; Kelly, Ryan T.

    2014-10-29

    This paper describes a fully automated droplet-based microfluidic device for on-demand serial dilution that is capable of achieving a dilution ratio of >6000 (concentration ranges from 1 mM to 160nM) over 35 nanoliter-scale droplets. This serial diluter can be applied to high throughput and label-free kinetic assays by integrating with our previously developed on-demand droplet-based microfluidic with mass spectrometry detection.

  7. Dilution refrigeration for space applications

    NASA Technical Reports Server (NTRS)

    Israelsson, U. E.; Petrac, D.

    1990-01-01

    Dilution refrigerators are presently used routinely in ground based applications where temperatures below 0.3 K are required. The operation of a conventional dilution refrigerator depends critically on the presence of gravity. To operate a dilution refrigerator in space many technical difficulties must be overcome. Some of the anticipated difficulties are identified in this paper and possible solutions are described. A single cycle refrigerator is described conceptually that uses forces other than gravity to function and the stringent constraints imposed on the design by requiring the refrigerator to function on the earth without using gravity are elaborated upon.

  8. Comparison of dosimetry gels prepared by agar and bovine gelatine

    NASA Astrophysics Data System (ADS)

    Sağsöz, M. E.; Korkut, Ö.; Alemdar, N.; Aktaş, S.; Çalı, E. B.; Kantarcı, M.

    2016-04-01

    Gel dosimeters are unique materials capable of showing three dimensional (3D) dose distributions of therapeutic or diagnostic exposures. Fricke gel dosimeters can be considered as chemical dosimeters that rely on a radiation-induced chemical reaction. Dose distribution of Fricke solutions containing Fe+2 ions determines the transformation of acidic, oxygen saturated Fe+2 ions to Fe+3 ions by the ionizing radiation in aqueous solutions. In this study we produced two different types of gel dosimeters using agar and bovine gelatin with similar fabrication methods. We compared the magnetic resonance (MR) T1 imaging responses of these two gel dosimeters to acquire a dose dependency of MR intensities. In conclusion agar gel dosimeters found to be produced easily and more consistent.

  9. A modified agar plate method for detection of Strongyloides stercoralis.

    PubMed

    Koga, K; Kasuya, S; Khamboonruang, C; Sukhavat, K; Ieda, M; Takatsuka, N; Kita, K; Ohtomo, H

    1991-10-01

    The agar plate method is a new technique with high detection rates for coprological diagnosis of human strongyloidiasis. This report details modifications of the technique and establishes a standardized procedure. We recommend that all plates should be carefully observed using a microscope because macroscopic observation can lead to false negative results. It is also advisable to pour formalin solution directly into microscopically positive dishes to collect worms by sedimentation. This procedure enables one to observe worms otherwise hidden. Sealing dishes with adhesive tape prevents larvae from crawling out of the dishes, eliminating any possibility in the reduction of detection rates, and greatly improves the safety conditions for the technician performing the procedure. We consider the agar plate method to be superior to the filter paper method in detecting Strongyloides, and we believe that it will eventually become the technique of choice.

  10. Phenotypic identification of Candida albicans by growth on chocolate agar.

    PubMed

    Sheth, Chirag C; Johnson, Elizabeth; Baker, Mark E; Haynes, Ken; Mühlschlegel, Fritz A

    2005-12-01

    In this study, we describe a simple method for the identification of Candida albicans in clinical samples. A total of 383 clinical isolates of Candida species were streaked onto chocolate agar and incubated for 48 h at 37 degrees C in the presence of an atmosphere of 6% CO2. All 208 of the C. albicans isolates tested, developed an easy to identify filamentous colony morphology. Of 175 other Candida species tested, 172 (98.3%) were distinguishable from C. albicans by their smooth colony morphology. Three isolates (1.7%) exhibited weak filamentation after prolonged incubation. Although not a routine medium in medical mycology a significant advantage of using chocolate agar lies in its use in clinical bacteriology laboratories for the isolation of fastidious bacteria. Implementation of the proposed method is applicable across a range of specimen types, thus allowing the direct identification of C. albicans in clinical samples. This simple method may allow a quicker entry into directed treatment.

  11. Agar-degrading bacteria isolated from Antarctic macroalgae.

    PubMed

    Alvarado, Roxana; Leiva, Sergio

    2017-03-10

    This study describes the taxonomic diversity of pigmented, agar-degrading bacteria isolated from the surface of macroalgae collected in King George Island, Antarctica. A total of 30 pigmented, agarolytic bacteria were isolated from the surface of the Antarctic macroalgae Adenocystis utricularis, Monostroma hariotii, Iridaea cordata, and Pantoneura plocamioides. Based on the 16S rRNA data, the agarolytic isolates were affiliated to the genera Algibacter, Arthrobacter, Brachybacterium, Cellulophaga, Citricoccus, Labedella, Microbacterium, Micrococcus, Salinibacterium, Sanguibacter, and Zobellia. Isolates phylogenetically related to Cellulophaga algicola showed the highest agarase activity in culture supernatants when tested at 4 and 37 °C. This is the first investigation of pigmented agar-degrading bacteria, members of microbial communities associated with Antarctic macroalgae, and the results suggest that they represent a potential source of cold-adapted agarases of possible biotechnological interest.

  12. Standardization of Neisseria meningitidis Serogroup B Colorimetric Serum Bactericida Assay

    PubMed Central

    Rodríguez, Tamara; Lastre, Miriam; Cedré, Barbara; Campo, Judith del; Bracho, Gustavo; Zayas, Caridad; Taboada, Carlos; Díaz, Miriam; Sierra, Gustavo; Pérez, Oliver

    2002-01-01

    The correlate of protection for serogroup B meningococci is not currently known, but for serogroup C it is believed to be the serum bactericidal assay (SBA). The current SBAs are labor intensive and the variations in protocols among different laboratories make interpretation of results difficult. A colorimetric SBA (cSBA), based on the ability of Neisseria meningitidis serogroup B to consume glucose, leading to acid production, was standardized by using group B strain Cu385-83 as the target. The cSBA results were compared to those obtained for a traditional colony-counting microassay (mSBA). Glucose and bromocresol purple pH indicator were added to the medium in order to estimate growth of cSBA target cell survivors through color change. Different variants of the assay parameters were optimized: growth of target cells (Mueller Hinton agar plates), target cell number (100 CFU/per well), and human complement source used at a final concentration of 25%. After the optimization, three other group B strains (H44/76, 490/91, and 511/91) were used as targets for the cSBA. The selection of the assay parameters and the standardization of cSBA were done with 13 sera from vaccinated volunteers. The titers were determined as the higher serum dilution that totally inhibited the bacterial growth marked by the color invariability of the pH indicator. This was detected visually as well as spectrophotometrically and was closely related to a significant difference in the growth of target cell survivors determined using Student’s t test. Intralaboratory reproducibility was ±1 dilution. The correlation between bactericidal median titers and specific immunoglobulin G serum concentration by enzyme immunoassay was high (r = 0.910, P < 0.01). The bactericidal titers generated by the cSBA and the mSBA were nearly identical, and there was a high correlation between the two assays (r = 0.974, P < 0.01). The standardized cSBA allows easy, fast, and efficient evaluation of samples. PMID

  13. Mupirocin-mucin agar for selective enumeration of Bifidobacterium bifidum.

    PubMed

    Pechar, Radko; Rada, Vojtech; Parafati, Lucia; Musilova, Sarka; Bunesova, Vera; Vlkova, Eva; Killer, Jiri; Mrazek, Jakub; Kmet, Vladimir; Svejstil, Roman

    2014-11-17

    Bifidobacterium bifidum is a bacterial species exclusively found in the human intestinal tract. This species is becoming increasingly popular as a probiotic organism added to lyophilized products. In this study, porcine mucin was used as the sole carbon source for the selective enumeration of B. bifidum in probiotic food additives. Thirty-six bifidobacterial strains were cultivated in broth with mucin. Only 13 strains of B. bifidum utilized the mucin to produce acids. B. bifidum was selectively enumerated in eight probiotic food supplements using agar (MM agar) containing mupirocin (100 mg/L) and mucin (20 g/L) as the sole carbon source. MM agar was fully selective if the B. bifidum species was presented together with Bifidobacterium animalis subsp. lactis, Bifidobacterium breve, and Bifidobacterium longum subsp. longum species and with lactic acid bacteria (lactobacilli, streptococci). Isolated strains of B. bifidum were identified using biochemical, PCR, MALDI-TOF procedures and 16S rRNA gene sequencing. The novel selective medium was also suitable for the isolation of B. bifidum strains from human fecal samples.

  14. Modeling development of inhibition zones in an agar diffusion bioassay.

    PubMed

    Chandrasekar, Vaishnavi; Knabel, Stephen J; Anantheswaran, Ramaswamy C

    2015-09-01

    A two-temperature agar diffusion bioassay is commonly used to quantify the concentration of nisin using Micrococcus luteus as the indicator microorganism. A finite element computational model based on Fick's second law of diffusion was used to predict the radius of the inhibition zone in this diffusion bioassay. The model developed was used to calculate nisin concentration profiles as a function of time and position within the agar. The minimum inhibitory concentration (MIC) of nisin against M. luteus was determined experimentally. The critical time (T c) for growth of M. luteus within the agar diffusion bioassay was experimentally determined using incubation studies with nisin. The radius of the inhibition zone was predicted from the computational model as the location where the predicted nisin concentration at T c was equal to MIC. The MIC was experimentally determined to be 0.156 μg mL(-1), and T c was determined to be 7 h. Good agreement (R (2) = 0.984) was obtained between model-predicted and experimentally determined inhibition zone radii.

  15. Diagnostic assays used to control small ruminant lentiviruses

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The serological diagnostic tests such as the agar gel immunodiffusion (AGID) assay and various types of enzyme linked immunosorbent assays (ELISAs) have contributed to the reduction of small ruminant lentivirus infections worldwide. Since there are no treatments or efficacious vaccines, the serolog...

  16. Application of in vitro soft agar techniques for growth of tumor cells to the study of colon cancer.

    PubMed

    Buick, R N; Fry, S E; Salmon, S E

    1980-03-15

    An in vitro assay to measure the clonogenic or colony-forming capability of cancer cells present in biopsy samples has recently been applied to study the biology and drug-sensitivity of a variety of human neoplasms. This approach appears to be suitable for study of the tumor stem or progenitor cells present in malignant effusions from patients with colonic carcinoma. In our preliminary studies, morphology of the tumor colonies by inverted microscopy and with Papanicolaou staining of dried agar plating layers as well as immunofluorescent localization with a specific antiserum to human carcinoembrionic antigen have been used as markers of the neoplastic origin of colon tumor colony-forming cells. Successful application of this assay to colonic solid tumors will require improvement in techniques for disaggregation of viable clonogenic cells. We anticipate that short term clonal assays will have increasing use for clinical and biological studies of human colon cancer.

  17. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In this work, we report the successful fabrication of agar-based nanofibers by an electrospinning technique using water as the solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operated at 50 deg C, to avoid agar gelation. Pure agar solution 1% (w/w) showed inadequ...

  18. Development of an eco-friendly agar extraction technique from the red seaweed Gracilaria lemaneiformis.

    PubMed

    Li, Haiyan; Yu, Xingju; Jin, Yan; Zhang, Wei; Liu, Yuanling

    2008-05-01

    The red seaweed, Gracilaria lemaneiformis growing as an aquaculture bioremediator along the coasts of Liaodong Peninsula, China, was investigated for the agar production. An eco-friendly method called agar photobleaching extraction process was developed for the benefit of workers' health and safety of the environment. The native agar (NA), alkali-modified agar (AA), chemical-bleached agar (CA) and photobleached agar (PA), which were extracted using different processes, were evaluated for their physical and chemical properties. The PA showed most desirable performances in terms of gel strength, gelling temperature, sulfate content and 3,6-anhydro-l-galactose content. Among the different processed agars, PA gel strength was 1913 g/cm2, the highest among the different processed agars, which increased 8.6% on the basis of the AA. Further we applied this new technique to extract agars from Gracilaria asiatica, and similar results were obtained with that of G. lemaneiformis. This indicates that the agar photobleaching extraction process is a feasible method for Gracilaria species and has a potential application. During the whole agar photobleaching extraction process the pigment content of G. lemaneiformis declined gradually and the TOC concentration in photobleaching solution increased along with the increase in the irradiation time. The mechanism of agar photobleaching could be elucidated by the photolysis theory.

  19. Biomathematical modeling for diluted drugs.

    PubMed

    Chattopadhyay, S

    2003-07-01

    Several workers have proven that succussed ultra high dilution of a drug molecule in water or alcoholic medium, even exceeding Avogadro number, can bring forth noticeable physiological changes of an organism. Homeopathic drugs are prepared by dissolving such drug ingredients in distilled water and then the solution is centesimally diluted serially by ethanol. A mathematical model has been proposed by the present worker, which explains why the drug does not become non-molecular even in ultra-high dilution. This is due to loss of homogeneity in the solution, caused by increase of dielectric constant of the medium during the process of potentization. Facilitated binding of the drug molecules with minute physiologically important protein factors may be the cause of visible physiological alterations.

  20. Josamycin: interpretation of inhibition zones with the Bauer-Kirby agar disk diffusion test as compared with erythromycin.

    PubMed

    Karthein, J; Spohr, M; Traub, W H

    1986-01-01

    A total of 432 clinical isolates of Staphylococcus aureus (128), coagulase-negative staphylococci (123), group A and B beta-hemolytic streptococci (61), group D streptococci (30), Streptococcus penumoniae (29), Haemophilus influenzae (19), Haemophilus parainfluenzae (12), and Legionella pneumophila (30) were examined with the agar dilution and Bauer-Kirby agar disk diffusion tests for susceptibility to josamycin as compared with erythromycin. On a weight-for-weight basis, erythromycin was more active than josamycin against all bacterial species, including L. pneumophila. Josamycin inhibited 18 of 23 S. aureus and 11 of 16 coagulase-negative staphylococcal strains resistant to erythromycin. Utilizing minimal inhibitory concentrations (MIC) breakpoints of less than or equal to 2 micrograms/ml (sensitive), 4 microgram/ml (intermediate) and of greater than or equal to 8 micrograms/ml (resistant), and inhibition zone criteria of greater than or equal to 18 mm diameter (sensitive), 14-17 mm (intermediate), and less than or equal to 13 mm (resistant), and excluding L. pneumophila, there was good correlation between erythromycin MIC and corresponding disk diffusion data for staphylococci and streptococci, but not for Haemophilus species. In comparison, josamycin yielded a significant number of minor discrepant data for group D streptococci and Haemophilus species. It is suggested that erythromycin and josamycin should not be tested against Haemophilus species, and that josamycin should be excluded from test batteries against enterococci. Erythromycin-resistant staphylococci require separate testing with josamycin.

  1. Epidemiology of Klebsiella oxytoca-associated diarrhea detected by Simmons citrate agar supplemented with inositol, tryptophan, and bile salts.

    PubMed

    Cheng, Vincent C C; Yam, Wing-Cheong; Tsang, Lee-Lee; Yau, Miranda C Y; Siu, Gilman K H; Wong, Sally C Y; Chan, Jasper F W; To, Kelvin K W; Tse, Herman; Hung, Ivan F N; Tai, Josepha W M; Ho, Pak-Leung; Yuen, Kwok-Yung

    2012-05-01

    We studied the clinical and epidemiological characteristics of Klebsiella oxytoca-associated diarrhea in hospitalized patients in Hong Kong. Between 1 November 2009 and 30 April 2011, all inositol-fermenting colonies found on Simmons citrate agar supplemented with inositol, tryptophan, and bile salts (SCITB agar) used for the culturing of diarrheal stool samples were screened by a spot indole test for K. oxytoca. The overall sensitivity of SCITB agar plus the spot indole test (93.3%) for the detection of K. oxytoca in stool samples was superior to that of MacConkey agar (63.3%), while the specificities were 100% and 60.4%, respectively. The former achieved a 23-fold reduction in the workload and cost of subsequent standard biochemical identifications. Cytotoxin production and the clonality of K. oxytoca were determined by a cell culture cytotoxicity neutralization assay using HEp-2 cells and pulsed-field gel electrophoresis (PFGE), respectively. Of 5,581 stool samples from 3,537 patients, K. oxytoca was cultured from 117/5,581 (2.1%) stool samples from 104/3,537 (2.9%) patients. Seventy-six of 104 (73.1%) patients with K. oxytoca had no copathogens in their diarrheal stool samples. Twenty-four (31.6%) of 76 patients carried cytotoxin-producing strains, which were significantly associated with antibiotic therapy after hospital admission (50% versus 21.2%; P = 0.01). Health care-associated diarrhea was found in 44 (42%) of 104 patients with K. oxytoca, but there was no epidemiological linkage suggestive of a nosocomial outbreak, and PFGE showed a diverse pattern. None of the patients with cytotoxin-producing K. oxytoca developed antibiotic-associated hemorrhagic colitis, suggesting that K. oxytoca can cause a mild disease manifesting as uncomplicated antibiotic-associated diarrhea with winter seasonality.

  2. Dilution and the elusive baseline.

    PubMed

    Likens, Gene E; Buso, Donald C

    2012-04-17

    Knowledge of baseline conditions is critical for evaluating quantitatively the effect of human activities on environmental conditions, such as the impact of acid deposition. Efforts to restore ecosystems to prior, "pristine" condition require restoration targets, often based on some presumed or unknown baseline condition. Here, we show that rapid and relentless dilution of surface water chemistry is occurring in the White Mountains of New Hampshire, following decades of acid deposition. Extrapolating measured linear trends using a unique data set of up to 47 years, suggest that both precipitation and streamwater chemistry (r(2) >0.84 since 1985) in the Hubbard Brook Experimental Forest (HBEF) will approximate demineralized water within one to three decades. Because such dilute chemistry is unrealistic for surface waters, theoretical baseline compositions have been calculated for precipitation and streamwater: electrical conductivity of 3 and 5 μS/cm, base cation concentrations of 7 and 39 μeq/liter, acid-neutralizing capacity values of <1 and 14 μeq/liter, respectively; and pH 5.5 for both. Significantly large and rapid dilution of surface waters to values even more dilute than proposed for Pre-Industrial Revolution (PIR) conditions has important ecological, biogeochemical and water resource management implications, such as for the success of early reproductive stages of aquatic organisms.

  3. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Dilution air and diluted exhaust...

  4. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Dilution air and diluted exhaust...

  5. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Dilution air and diluted exhaust...

  6. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Dilution air and diluted exhaust...

  7. 40 CFR 1065.240 - Dilution air and diluted exhaust flow meters.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Measurement Instruments Flow-Related Measurements § 1065.240 Dilution air and diluted exhaust flow meters. (a) Application. Use a diluted exhaust flow... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Dilution air and diluted exhaust...

  8. Use of serum ultrafiltrate in the serum dilution test.

    PubMed

    Leggett, J E; Wolz, S A; Craig, W A

    1989-10-01

    Although pooled human serum diluent is advocated in the serum dilution test, its use may compensate for protein binding defects in patients and yield nonrepresentative titers. To test this hypothesis, comparison was made of serum ultrafiltrate (molecular weight cutoff less than or equal to 30,000) serially diluted into either pooled serum ultrafiltrate or Mueller-Hinton broth with patient serum samples diluted into pooled human serum in 111 assays from 55 patients and 6 volunteers. Of 111 bactericidal titers in ultrafiltrate and/or Mueller-Hinton broth, 101 were within a single twofold dilution of titers in pooled human serum. Nine of 10 discordant titers involved highly bound drugs and were usually higher in ultrafiltrate than in pooled human serum. In seven additional volunteers with renal failure, titers in ultrafiltrate and in each volunteer's serum were higher than those diluted in pooled human serum (P = .002). Recommended methods using pooled serum diluent may not accurately predict actual bactericidal titers in patients with abnormal protein binding.

  9. Development of a caseinase assay for PCR independent detection of esp gene carriage among enterococci

    NASA Astrophysics Data System (ADS)

    Dada, Ayokunle Christopher; Asmat, Ahmad; Lee, Yook Heng; Usup, Gires

    2013-11-01

    Currently, there is no known relationship between caseinase and carriage of esp gene. Also, no breakpoints exist for phenotypic assays that are used to infer virulence characteristics among Enterococci. In the present study, caseinase activity was measured by a radial diffusion assay for 113 enterococci isolates. A standard curve with predictive r2 value of 0.939 was produced by dispensing several doubling dilutions of proteinase K into 3% skimmed milk agar wells. Caseinase activity for all tested enterococci was subsequently converted into proteinase K activity, using the obtained chart. Caseinase activity ranged from 1.74 × 10-8 to 4.47 × 10-7ug/ml and 6.37 × 10-8 to 8.82 × 10-8 ug/ml per colony of environmental and clinical enterocococci tested, proportionate to proteinase K activity. Caseinase activity among environmental strains was five-fold higher than was observed among clinical strains. Fishers exact test revealed significant associations between esp gene carriage and caseinase activity (diameter on skimmed milk, z=8 to 13mm) at p<0.1. However, the probability of association was strongest at z=13 mm (p=0.033) suggesting a range of diameter cut-offs that was exclusive to and may be used to predict the presence of environmental enterococci strains harbouring esp gene. Results obtained from sensitivity analysis showed increasing assay sensitivity from cut-off of 9 mm (61.54%) up to 84.62% (13 mm). Specificity of the caseinase assay slightly decreased from 50% to 42.86% as cut-off increased from 9 to 13 mm. The caseinase assay described here potentially proves useful in preliminary PCR independent screening of environmental enterococci isolates for the detection of strains which carry the esp gene known to increase the severity of enterococcal infections.

  10. Comparison of Fecal Coliform Agar and Violet Red Bile Lactose Agar for Fecal Coliform Enumeration in Foods

    PubMed Central

    Leclercq, A.; Wanegue, C.; Baylac, P.

    2002-01-01

    A 24-h direct plating method for fecal coliform enumeration with a resuscitation step (preincubation for 2 h at 37 ± 1°C and transfer to 44 ± 1°C for 22 h) using fecal coliform agar (FCA) was compared with the 24-h standardized violet red bile lactose agar (VRBL) method. FCA and VRBL have equivalent specificities and sensitivities, except for lactose-positive non-fecal coliforms such as Hafnia alvei, which could form typical colonies on FCA and VRBL. Recovery of cold-stressed Escherichia coli in mashed potatoes on FCA was about 1 log unit lower than that with VRBL. When the FCA method was compared with standard VRBL for enumeration of fecal coliforms, based on counting carried out on 170 different food samples, results were not significantly different (P > 0.05). Based on 203 typical identified colonies selected as found on VRBL and FCA, the latter medium appears to allow the enumeration of more true fecal coliforms and has higher performance in certain ways (specificity, sensitivity, and negative and positive predictive values) than VRBL. Most colonies clearly identified on both media were E. coli and H. alvei, a non-fecal coliform. Therefore, the replacement of fecal coliform enumeration by E. coli enumeration to estimate food sanitary quality should be recommended. PMID:11916678

  11. Antimicrobial Activity of Endodontic Medicaments and Vehicles using Agar Well Diffusion Method on Facultative and Obligate Anaerobes

    PubMed Central

    Bhat, Kishore G; Sogi, Suma

    2016-01-01

    Aims The aim of this study was to determine the relative antimicrobial effectiveness of these endodontic medicaments and various vehicles using an agar well diffusion assay. Materials and methods Double Antibiotic Paste(DAP), modified DAP, 2% Chlorhexidine gluconate and their combination with four vehicles namely Polyethylene glycol 400 (PEG), Propylene glycol (PG), combinations of PG with PEG and lastly Glycerine were tested using agar well diffusion assay. The minimum bactericidal concentration was noted against four standard strains of organisms ie Streptococcus mutans ATCC( American Type Culture Collection) 25175, Staphylococcus aureus ATCC 12598, Enterococcus faecalis ATCC 35550 and Eschericia coli ATCC 25922. Successful endodontic therapy depends upon thorough disinfection of root canals. In some refractory cases, routine endodontic therapy is not sufficient, so intracanal medicaments are used for proper disinfection of canals. Issues of resistance, limited spectrum of activity and lack of antifungal properties, the hunt for the ideal intracanal medicament continues. In this regard, the vehicles used to form the pastes play a supportive role by forming the appropriate consistency for placement and may dramatically influence their chemical characteristics like their solubility and diffusion. Thus, inorder to use safer and equally effective intracanal medicaments, Chlorhexidine gluconate is being unveiled in this study. Results The difference between the four vehicles when combined with the same endodontic medicament studied above is nonsignificant (NS) except against Porphyromonas gingivalis. Propylene glycol is significantly effective than Glycerine when used with DAP ie C+M medicament combination. (p = 0.029) Conclusion 2% chlorhexidine gluconate and modified DAP can definitely replace DAP and triple antibiotic paste as end-odontic medicaments with chlorhexidine having an added advantage of bactericidal action, substantivity, biocompatibility, low toxicity

  12. Surface migration of Staphylococcus xylosus on low-agar media.

    PubMed

    Dordet-Frisoni, Emilie; Gaillard-Martinie, Brigitte; Talon, Régine; Leroy, Sabine

    2008-05-01

    Staphylococcus xylosus is a commensal species commonly found on the skin of mammals, but also currently used as starter culture for meat fermentation. Most strains of this species colonize by forming a biofilm on abiotic surfaces. We show here that the majority of S. xylosus strains also exhibit extensive colony spreading on the surface of soft agar media. This phenomenon seemed to be independent of biofilm-forming ability. It occurred in different culture media and was dependent on temperature. Formation of a giant S. xylosus colony did not involve a biosurfactant. Microscopic observation showed that the front of the giant colony comprised a single layer of spacing cells with more packed cells in the median area. Supplementation of the soft media with DNase I increased S. xylosus colony spreading, indicating that extracellular DNA may be involved in limiting the phenomenon. The ability of S. xylosus to spread on semi-solid surfaces may constitute an advantage for surface colonization.

  13. Topoisomerase Assays

    PubMed Central

    Nitiss, John L.; Soans, Eroica; Rogojina, Anna; Seth, Aman; Mishina, Margarita

    2012-01-01

    Topoisomerases are nuclear enzymes that play essential roles in DNA replication, transcription, chromosome segregation, and recombination. All cells have two major forms of topoisomerases: type I, which makes single-stranded cuts in DNA, and type II enzymes, which cut and pass double-stranded DNA. DNA topoisomerases are important targets of approved and experimental anti-cancer agents. The protocols described in this unit are of assays used to assess new chemical entities for their ability to inhibit both forms of DNA topoisomerase. Included are an in vitro assay for topoisomerase I activity based on relaxation of supercoiled DNA and an assay for topoisomerase II based on the decatenation of double-stranded DNA. The preparation of mammalian cell extracts for assaying topoisomerase activity is described, along with a protocol for an ICE assay for examining topoisomerase covalent complexes in vivo and an assay for measuring DNA cleavage in vitro. PMID:22684721

  14. Normal force controlled rheology applied to agar gelation

    NASA Astrophysics Data System (ADS)

    Mao, Bosi; Divoux, Thibaut; Snabre, Patrick

    2016-05-01

    A wide range of thermoreversible gels are prepared by cooling down to ambient temperature hot aqueous polymer solutions. During the sol-gel transition, such materials may experience a volume contraction which is traditionally overlooked as rheological measurements are usually performed in geometries of constant volume. In this article, we revisit the formation of 1.5\\% wt. agar gels through a series of benchmark rheological experiments performed with a plate-plate geometry. We demonstrate on that particular gel of polysaccharides that the contraction associated with the sol/gel transition cannot be neglected. Indeed, imposing a constant gap width during the gelation results in the strain hardening of the sample, as evidenced by the large negative normal force that develops. Such hardening leads to the slow drift in time of the gel elastic modulus $G'$ towards ever larger values, and thus to an erroneous estimate of $G'$. As an alternative, we show that imposing a constant normal force equals to zero during the gelation, instead of a constant gap width, suppresses the hardening as the decrease of the gap compensates for the sample contraction. Using normal force controlled rheology, we then investigate the impact of thermal history on 1.5\\% wt. agar gels. We show that neither the value of the cooling rate, nor the introduction of a constant temperature stage during the cooling process influence the gel elastic properties. Instead, $G'$ only depends on the terminal temperature reached at the end of the cooling ramp, as confirmed by direct imaging of the gel microstructure by cryoelectron microscopy. The present work offers an extensive review of the technical difficulties associated with the rheology of hydrogels and paves the way for a systematic use of normal force controlled rheology to monitor non-isochoric processes.

  15. Detection of enterotoxigenic Escherichia coli colonization factor antigen I in stool specimens by an enzyme-linked immunosorbent assay.

    PubMed Central

    Evans, D G; Evans, D J; Clegg, S

    1980-01-01

    An enzyme-linked immunosorbent assay (ELISA) was employed to detect and quantitate the fimbrial colonization factor antigen (CFA/I) of enterotoxigenic Escherichia coli in stool specimens obtained from adult cases of diarrhea in which CFA/I-positive E. coli was the known causative agent. The inhibition method, or blocking technique, was used. In this method, a standardized dilution of human anti-CFA/I serum was preincubated with dilutions of stool extract before transfer to CFA/I-coated microtiter plate wells, and then ELISA was performed with alkaline phosphatase-conjugated anti-human immunoglobulin. CFA/I purified from E. coli strain H-10407 (O78:H11) was used. Acute-phase diarrheal stool specimens were found to contain approximately 3.0 mg of antigen (mean value) per g stool, whereas control (CFA/I-negative) specimens contained insignificant amounts (less than 0.03 mg/g) of antigen. Also, CFA/I was detected in culture fluids of CFA/I positive enterotoxigenic E. coli belonging to a variety of serotypes and was undetectable in similar preparations from P-strains (spontaneous CFA/I-negative derivatives) of the same test cultures. Equivalent results were obtained in ELISA tests by using bacterial cells taken from isolated colonies grown on CFA agar. These results indicate that the ELISA technique will be useful for the diagnosis of diarrhea caused by CFA/I-positive enterotoxigenic E. coli. PMID:7031075

  16. Rapid Quantitative Serological Assay of Staphylococcal Enterotoxin B

    PubMed Central

    Weirether, Francis J.; Lewis, Evelyn E.; Rosenwald, Albert J.; Lincoln, Ralph E.

    1966-01-01

    A simple, rapid method, based on the Oudin single diffusion technique, is described for the quantitative assay of staphylococcal enterotoxin B. The method yields reproducible results without close control of such assay variables as temperature, antiserum dilution, and assay time, provided that the ionic strength is maintained above 0.2 n sodium chloride equivalent. PMID:4959985

  17. Science Notes: Dilution of a Weak Acid

    ERIC Educational Resources Information Center

    Talbot, Christopher; Wai, Chooi Khee

    2014-01-01

    This "Science note" arose out of practical work involving the dilution of ethanoic acid, the measurement of the pH of the diluted solutions and calculation of the acid dissociation constant, K[subscript a], for each diluted solution. The students expected the calculated values of K[subscript a] to be constant but they found that the…

  18. Residual Agar Determination in Bacterial Spores by Electrospray Ionization Mass Spectrometry

    SciTech Connect

    Wahl, Karen L.; Colburn, Heather A.; Wunschel, David S.; Petersen, Catherine E.; Jarman, Kristin H.; Valentine, Nancy B.

    2010-02-15

    Presented here is an analytical method to detect residual agar from a bacterial spore sample as an indication of culturing on an agar plate. This method is based on the resolubilization of agar polysaccharide from a bacterial spore sample, enzymatic digestion, followed by electrospray ionization tandem mass spectrometry (ESI-MSn) analysis for detection of a specific agar fragment ion. A range of Bacillus species and strains were selected to demonstrate the effectiveness of this approach. The characteristic agar fragment ion was detected in the spores grown on agar that were washed from 1 to 5 times, irradiated or non-irradiated and not in the spores grown in broth. A sample containing approximately 108 spores is currently needed for confident detection of residual agar from culture on agar plates in the presence of bacterial spores with a limit of detection of approximately 1 ppm agar spiked into a broth-grown spore sample. The results of a proficiency test with 42 blinded samples are presented demonstrating the utility of this method with no false positives and only 3 false negatives for samples that were below the detection level of the method as documented.

  19. Biochemical differentiation of the Enterobacteriaceae with the aid of lysine-iron-agar.

    PubMed

    Johnson, J G; Kunz, L J; Barron, W; Ewing, W H

    1966-03-01

    A procedure is described for identifying members of the family Enterobacteriaceae isolated from clinical specimens. The methods are based on primary differentiation of the various groups of bacteria by the use of Kligler Iron Agar and lysine-iron-agar. For identification of Salmonella, Shigella, and Arizona group organisms from stools, Triple Sugar Iron Agar and lysine-iron-agar are employed. The usefulness of this schema for diagnostic bacteriology laboratories is discussed. It is not intended to replace methods used in reference or research laboratories.

  20. Comparison of isolation of Haemophilus vaginalis (Corynebacterium vaginale) from peptone-starch-dextrose agar and Columbia colistin-nalidoxic acid agar.

    PubMed Central

    Golberg, R L; Washington JA, I I

    1976-01-01

    A total of 447 cervical or vaginal specimens were inoculated in parallel onto peptone-starch-dextrose (PSD) and Columbia colistin (10 mg/ml)-nalidixic acid (15 mug/ml) (CNA) agar and were incubated for 48 h at 35 degrees C in an atmosphere with 2 to 10% CO2. One hundred (22.4%) of the cultures were positive for Haemophilus vaginalis. Forty-eight of the isolates were recovered from both PSD and Columbia CNA agar, five from PSD only, and 47 from Columbia CNA agar only (P less than 0.001). On Columbia CNA agar, 76 of the isolates were detected after 24 h of incubation, and the remainder were detected within 4 days of incubation. PMID:1085777

  1. Modeling the Dilution of Static Droplet Arrays with Moving Plugs

    NASA Astrophysics Data System (ADS)

    Wang, William; Vanapalli, Siva

    2014-11-01

    Generation of arrays of immobilized microfluidic droplets with variation in reagent concentration from drop-to-drop is important for a variety of biochemical and screening assays. Recently our laboratory (Sun et al., Lab Chip, 2011) showed that such gradients in chemical concentration can be achieved by coalescing diluting plugs with drops immobilized in a microfluidic parking network. In this study, we investigate the key hydrodynamic mechanisms responsible for generation of concentration gradients in static droplet arrays, with the goal of predicting the dilution profiles observed in experiments. We conduct simulations based on a phenomenological model that includes diffusion, advection due to circulating flow within moving plugs, enhanced material transfer due to coalescence and break-up events, and geometry. Consistent with experiments, we find that the concentration profiles can exhibit segmentation between rows of parked droplets due to coalescence events occurring on alternating sides of the diluting plug. Tail-sweeping of wall material can increase concentrations in the plug tail. Also, coalescence and break-up events can significantly enhance dilution rates and ranges. Our results impact the design of SDAs for creating broad and predictable concentration gradients. NSF CAREER.

  2. NAS agar is more suitable than McKay agar for primary culture of Streptococcus milleri group (SMG) fastidious bacteria, S. intermedius in particular.

    PubMed

    Raclavsky, Vladislav; Novotny, Radko; Stary, Lubomir; Navratilova, Lucie; Zatloukal, Jaromir; Jakubec, Petr; Zapalka, Martin; Kopriva, Frantisek; Kolek, Vitezslav

    2017-01-01

    Streptococcus milleri group (SMG) is a group of three streptococcal species (S. anginosus, intermedius and constellatus) that act as opportunist pathogens, among others in cystic fibrosis. Due to their fastidious character, they are both difficult to cultivate and to differentiate from less pathogenic streptococcal species, therefore being most probably underdiagnosed. Semi-selective McKay agar and NAS agar were developed to facilitate SMG recovery from clinical samples; however, direct comparison of recovery rates has not been published yet. We tested the performance of both media on 123 patient samples and demonstrated general superiority of NAS agar for SMG recovery during primary cultivation convincingly. This observation was also confirmed by quantitative drop tests during subculture. Despite the undisputed overall superiority of NAS agar over McKay agar, a smaller fraction of strains grew better on McKay agar. Inter-strain differences were the most probable explanation. Therefore, when economic conditions are not limiting and maximum recovery rate is desirable, both plates are advised to be used in parallel for primary cultivation of clinical samples.

  3. Enzyme assays.

    PubMed

    Reymond, Jean-Louis; Fluxà, Viviana S; Maillard, Noélie

    2009-01-07

    Enzyme assays are analytical tools to visualize enzyme activities. In recent years a large variety of enzyme assays have been developed to assist the discovery and optimization of industrial enzymes, in particular for "white biotechnology" where selective enzymes are used with great success for economically viable, mild and environmentally benign production processes. The present article highlights the aspects of fluorogenic and chromogenic substrates, sensors, and enzyme fingerprinting, which are our particular areas of interest.

  4. CTL ELISPOT assay.

    PubMed

    Ranieri, Elena; Popescu, Iulia; Gigante, Margherita

    2014-01-01

    Enzyme-linked immune absorbent spot (Elispot) is a quantitative method for measuring relevant parameters of T cell activation. The sensitivity of Elispot allows the detection of low-frequency antigen-specific T cells that secrete cytokines and effector molecules, such as granzyme B and perforin. Cytotoxic T cell (CTL) studies have taken advantage with this high-throughput technology by providing insights into quantity and immune kinetics. Accuracy, sensitivity, reproducibility, and robustness of Elispot resulted in a wide range of applications in research as well as in diagnostic field. Actually, CTL monitoring by Elispot is a gold standard for the evaluation of antigen-specific T cell immunity in clinical trials and vaccine candidates where the ability to detect rare antigen-specific T cells is of relevance for immune diagnostic. The most utilized Elispot assay is the interferon-gamma (IFN-γ) test, a marker for CD8(+) CTL activation, but Elispot can also be used to distinguish different subsets of activated T cells by using other cytokines such as T-helper (Th) 1-type cells (characterized by the production of IFN-γ, IL-2, IL-6, IL-12, IL-21, and TNF-α), Th2 (producing cytokines like IL-4, IL-5, IL-10, and IL-13), and Th17 (IL-17) cells. The reliability of Elispot-generated data, by the evaluation of T cell frequency recognizing individual antigen/peptide, is the core of this method currently applied widely to investigate specific immune responses in cancer, infections, allergies, and autoimmune diseases. The Elispot assay is competing with other methods measuring single-cell cytokine production, e.g., intracellular cytokine by FACS or Miltenyi cytokine secretion assay. Other types of lymphocyte frequency and function assays include limiting dilution assay (LDA), cytotoxic T cell assay (CTL), and tetramer staining. Compared with respect to sensitivity the Elispot assay is outranking other methods to define frequency of antigen-specific lymphocytes. The method

  5. A Microgravity Helium Dilution Cooler

    NASA Technical Reports Server (NTRS)

    Roach, Pat R.; Sperans, Joel (Technical Monitor)

    1994-01-01

    We are developing a He-3-He-4 dilution cooler to operate in microgravity. It uses charcoal adsorption pumps and heaters for its operation; it has no moving parts. It currently operates cyclically to well below 0.1 K and we have designed a version to operate continuously. We expect that the continuous version will be able to provide the long-duration cooling that many experiments need at temperatures down to 0.040 K. More importantly, such a dilution cooler could provide the precooling that enables the use of adiabatic demagnetization techniques that can reach temperatures below 0.001 K. At temperatures below 0.002 K many fascinating microgravity experiments on superfluid He-3 become possible. Among the possibilities are: research into a superfluid He-3 gyroscope, study of the nucleation of the B-phase of superfluid He-3 when the sample is floating out of contact with walls, study of the anisotropy of the surface tension of the B-phase, and NMR experiments on tiny free-floating clusters of superfluid He-3 atoms that should model the shell structure of nuclei.

  6. Evaluation of fluorogenic TSC agar for recovering Clostridium perfringens in groundwater samples.

    PubMed

    Araujo, M; Sueiro, R A; Gómez, M J; Garrido, M J

    2001-01-01

    Clostridium perfringens is widely recognised as a reliable water pollution indicator. Since several media can be employed for the membrane filtration enumeration of this microorganism, the main aim of this work was to investigate the ability of fluorocult-supplemented TSC-agar (Merck) for recovering Cl. perfringens from public springs used for direct human consumption. Cl. perfringens recovery was also performed on mCP agar (Cultimed) according to Directive 98/83 as well as on TSC-Agar (Merck), TSN-Agar (Merck) and SPS-Agar (BBL) media. Variance analysis of data obtained showed no statistically significant differences in the counts obtained among all media employed in this work. However, the Cl. perfringens recovery efficiencies with TSC and fluorogenic TSC agars were significantly greater (P = < 0.05) than the corresponding values of mCP and TSN media. On the other hand, the identification of typical and atypical colonies isolated from all media demonstrated that fluorogenic TSC agar was the most specific medium for Cl. perfringens recovery in groundwater samples (85.3% of typical colonies and 82.8% of atypical colonies confirmed). In summary, the membrane filtration technique with fluorogenic TSC agar showed the best performance characteristics of all the media tested as judged by their recovery efficiency and specificity in these water samples.

  7. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-01-22

    In this work, we report the successful fabrication of agar-based nanofibers by electrospinning technique, using water as solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operating at 50°C, to avoid agar gelation. Agar pure solution (1 wt%) showed inadequate spinnability regardless of the used electrospinning conditions. The addition of a co-blending polymer such as PVA (10 wt% starting solution) improved the solutions viscoelasticity and hence, the solutions spinnability. Agar/PVA solutions were prepared with different mass ratios (100/0, 50/50, 40/60, 30/70, 20/80 and 0/100) and electrospun at various sets of electrospinning conditions. Best nanofibers were obtained with 30/70 and 20/80 agar/PVA blends while samples with higher agar contents (50/50 and 40/60 agar/PVA) were harder to process and led to discontinuous fibrous mats. This first set of encouraging results can open a new window of opportunities for agar-based biomaterials in the form of nanofibers.

  8. Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties.

    PubMed

    Jumaidin, R; Sapuan, S M; Jawaid, M; Ishak, M R; Sahari, J

    2016-08-01

    The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc.

  9. Evaluation of diffusion and dilution methods to determine the antibacterial activity of plant extracts.

    PubMed

    Klancnik, Anja; Piskernik, Sasa; Jersek, Barbara; Mozina, Sonja Smole

    2010-05-01

    The aim of this study was to evaluate diffusion and dilution methods for determining the antibacterial activity of plant extracts and their mixtures. Several methods for measurement of the minimal inhibitory concentration (MIC) of a plant extract are available, but there is no standard procedure as there is for antibiotics. We tested different plant extracts, their mixtures and phenolic acids on selected gram-positive (Staphylococcus aureus, Bacillus cereus, and Listeria monocytogenes) and gram-negative bacteria (Escherichia coli O157:H7, Salmonella Infantis, Campylobacter jejuni, Campylobacter coli) with the disk diffusion, agar dilution, broth microdilution and macrodilution methods. The disk diffusion method was appropriate only as a preliminary screening test prior to quantitative MIC determination with dilution methods. A comparison of the results for MIC obtained by agar dilution and broth microdilution was possible only for gram-positive bacteria, and indicated the latter as the most accurate way of assessing the antimicrobial effect. The microdilution method with TTC (2,3,5-triphenyl tetrazolium chloride) or INT (2-p-iodophenyl-3-p-nitrophenyl-5-phenyl tetrazolium chloride) to indicate the viability of aerobic bacteria was found to be the best alternative approach, while only ATP determination was appropriate for microaerophilic Campylobacter spp. Using survival curves the kinetics of bacterial inactivation on plant extract exposure was followed for 24h and in this way the MIC values determined by the microdilution method were confirmed as the concentrations of extracts that inhibited bacterial growth. We suggest evaluation of the antibacterial activity of plant extracts using the broth microdilution method as a fast screening method for MIC determination and the macrodilution method at selected MIC values to confirm bacterial inactivation. Campylobacter spp. showed a similar sensitivity to plant extracts as the tested gram-positive bacteria, but S

  10. Plug-Volume-Modulated Dilution Generator for Flask-Free Chemistry.

    PubMed

    Liu, Pei-Han; Urban, Pawel L

    2016-12-06

    Dilution is one of the common chemical procedures which are carried out in all chemistry laboratories-to prepare standard solutions with different concentrations for assay calibration, and to reduce matrix effects while handling complex samples. Yet dilution is mostly performed manually using large-volume manual liquid-handling tools (volumetric flasks, graduated cylinders, and pipettes). Here we describe a simple continuous and automated method of diluting complex samples and stock solutions using an Arduino-based control unit. The proposed plug-volume-modulation approach relies on continuous introduction of short plugs of samples separated with short plugs of solvent. The train of sample pulses is generated by opening and closing two pinch valves interchangeably, so that either sample or solvent can enter the mixing zone (T-junction). The plugs of sample and solvent are pulled along a transfer flow line by a peristaltic pump. They mix due to advection, turbulence, and diffusion. The effluent of the flow line supplies diluted samples with well-defined dilution factors. The desired dilution factor is programmed by setting the duration of sample and solvent pulses injected in every cycle. The sample duty cycle effectively determines the dilution factor. Initially, we verified the quality of the generated diluted samples by off-line and online optical detection. We further demonstrated the usefulness of this dilution generator when selecting the optimum dilution factors for complex samples analyzed by direct infusion electrospray ionization mass spectrometry. The proposed method eliminates conventional glassware from dilution steps. Hence, it can readily be incorporated into automated analytical systems.

  11. Adsorptive removal of methylene blue by agar: effects of NaCl and ethanol

    PubMed Central

    2012-01-01

    Adsorption of methylene blue (MB) on agar was investigated as a function of temperature (308-328 K), different concentrations of NaCl and HCl and various weight percentages of binary mixtures of ethanol with water. It was observed that the maximum experimental adsorption capacity, qm, exp, in water is up to 50 mg g-1 and decreases with increase in weight percentage of ethanol and NaCl and HCl concentration compared to that of water. Analysis of data using ARIAN model showed that MB adsorbs as monomer and dimer on the surface of agar. Binding constants of MB to agar were calculated using the Temkin isotherm. The process is exothermic in water and other solutions. The mean adsorption energy (E) value indicated binding of MB to agar is chemical adsorption. Kinetics of this interaction obeys from the pseudo-second-order model and diffusion of the MB molecules into the agar is the main rate-controlling step. PMID:22339759

  12. [Evaluation of a new medium, eggplant (Solanum melongena) agar as a screening medium for Cryptococcus neoformans in environmental samples].

    PubMed

    Sengul, Mustafa; Ergin, Cağrı; Kartal, Tuğba

    2014-04-01

    Cryptococcus neofomans is an encapsulated yeast-like fungus that causes life-threatening infections, especially in immunosuppresive patients. C.neoformans infection is believed to be acquired via inhalation of aerosolized particles from the environment. Avian guano, decaying tree hollows and soil are the related known environmental niches. Brown pigmented yeast growth from the precursors in growth media is an important step for the identification and isolation of C.neoformans. Seeds of plants in nature are preferred owing to easy accessibility and low costs for the preparation of such media. Guizotia abysinicca (Niger seed) as Staib agar, Helianthus annus (Sunflower) as Pal's medium, Brassica nigra (Mustard) agar, tobacco agar, Mucuna pruriens (Velvet bean) seed agar, Perilla frutescens (Beefsteak plant) seed agar, Rubus fruticosus (Blackberry) agar and ground red hot pepper agar are pigment-based selective media for the differentiation of C.neoformans. The aim of this study was to observe the pigment production of C.neoformans in a new medium based on eggplant (Solanum melongena) and also to compare its performance with the simplified Staib, Pal's and tobacco agar for isolation from the environment. Three different eggplant-based medium (S.melongena Melanzaza viserba, S.melongena Pinstripe F1 and S.ovigerum Ivory F1) were included in the study. Pigment-forming eggplant medium, simplified Staib agar, Pal's agar and tobacco agar were used for the cultivation of the environmental swabbed samples from 19 Eucalyptus camaldulensis trunk hollows in continuous colonization region. While pigment formation were observed with S.melongena Melanzaza viserba and S.melongena Pinstripe F1 containing media, S.ovigerum Ivory F1 medium was found to be non-reactive. In colonization area (Gökova-Akyaka, Turkey), 11 (57.9%) out of 19 E.camaldulensis samples were positive with simplified Staib agar, Pal's agar and eggplant agar while 10 (52.6%) of them are positive with tobacco agar. C

  13. Evaluating 6 ricin field detection assays.

    PubMed

    Slotved, Hans-Christian; Sparding, Nadja; Tanassi, Julia Tanas; Steenhard, Nina R; Heegaard, Niels H H

    2014-01-01

    This study presents data showing the performance of 6 commercial detection assays against ricin around concentrations specified as detection limits by the producers. A 2-fold dilution series of 20 ng/ml ricin was prepared and used for testing the lateral-flow kits: BADD, Pro Strips™, ENVI, RAID DX, Ricin BioThreat Alert, and IMASS™ device. Three of the 6 tested field assays (IMASS™ device, ENVI assay, and the BioThreat Alert assay) were able to detect ricin, although differences in the measured detection limits compared to the official detection limits and false-negative results were observed. We were not able to get the BADD, Pro Strips™, and RAID assays to function in our laboratory. We conclude that when purchasing a field responder assay, there is large variation in the specificity of the assays, and a number of in-house tests must be performed to ensure functionality.

  14. Desynchronization in diluted neural networks.

    PubMed

    Zillmer, Rüdiger; Livi, Roberto; Politi, Antonio; Torcini, Alessandro

    2006-09-01

    The dynamical behavior of a weakly diluted fully inhibitory network of pulse-coupled spiking neurons is investigated. Upon increasing the coupling strength, a transition from regular to stochasticlike regime is observed. In the weak-coupling phase, a periodic dynamics is rapidly approached, with all neurons firing with the same rate and mutually phase locked. The strong-coupling phase is characterized by an irregular pattern, even though the maximum Lyapunov exponent is negative. The paradox is solved by drawing an analogy with the phenomenon of "stable chaos," i.e., by observing that the stochasticlike behavior is "limited" to an exponentially long (with the system size) transient. Remarkably, the transient dynamics turns out to be stationary.

  15. Band anticrossing in dilute nitrides

    SciTech Connect

    Shan, W.; Yu, K.M.; Walukiewicz, W.; Wu, J.; Ager III, J.W.; Haller, E.E.

    2003-12-23

    Alloying III-V compounds with small amounts of nitrogen leads to dramatic reduction of the fundamental band-gap energy in the resulting dilute nitride alloys. The effect originates from an anti-crossing interaction between the extended conduction-band states and localized N states. The interaction splits the conduction band into two nonparabolic subbands. The downward shift of the lower conduction subband edge is responsible for the N-induced reduction of the fundamental band-gap energy. The changes in the conduction band structure result in significant increase in electron effective mass and decrease in the electron mobility, and lead to a large enhance of the maximum doping level in GaInNAs doped with group VI donors. In addition, a striking asymmetry in the electrical activation of group IV and group VI donors can be attributed to mutual passivation process through formation of the nearest neighbor group-IV donor nitrogen pairs.

  16. The activated partial thromboplastin time of diluted plasma: variability due to the method of fibrin detection.

    PubMed Central

    Johnstone, I B

    1984-01-01

    The purpose of this study was to determine the effects of the dilution of plasma (1/3 in saline) on the kinetics of fibrin generation in the activated partial thromboplastin time (APTT) assay. The diluted APTT is considered to increase the sensitivity of the APTT test however, studies in our laboratory using an electro-optical fibrin detection system failed to show significant differences in APTT values obtained with diluted and undiluted canine plasma. Seventeen plasmas, including plasmas moderately and markedly deficient in intrinsic factor activity were assayed in the undiluted and diluted APTT assay using two methods for fibrin endpoint detection; a visual "tilt-tube" technique and an electro-optical detection system. In the former technique the endpoint was the formation of a visible fibrin web or clot; in the latter procedure the end point was the first detection of a change in optical density of the plasma. Optical density changes during fibrin formation were also recorded ( thrombokinetograms ). The results indicated that the electro-optical fibrin detection system failed to identify a prolongation of the APTT as a result of 1/3 plasma dilution; a prolongation that was consistently observed with the visual fibrin detection technique. Plasma dilution however, did significantly reduce the rate of fibrin production as indicated by the thrombokinetogram profile. It was concluded that the dilution of plasma with saline, as has been used to increase the sensitivity of the APTT assay procedure, has little effect on the time of onset of fibrin formation in a given plasma. The major effect appears to be on the way in which fibrin forms in that the polymerization/crosslinkage events associated with macroscopic fibrin production are delayed. PMID:6722646

  17. Continuous degradation of maltose: improvement in stability and catalytic properties of maltase (α-glucosidase) through immobilization using agar-agar gel as a support.

    PubMed

    Nawaz, Muhammad Asif; Karim, Asad; Aman, Afsheen; Marchetti, Roberta; Qader, Shah Ali Ul; Molinaro, Antonio

    2015-04-01

    Maltose degrading enzyme was immobilized within agar-agar support via entrapment method due to its industrial utilization. The maximum immobilization efficiency (82.77%) was achieved using 4.0% agar-agar keeping the diameter of bead up to 3.0 mm. The matrix entrapment showed maximum catalytic activity at pH 7.0 and temperature 65 °C. Substrate saturation kinetics showed that the K m of immobilized enzyme increased from 1.717 to 2.117 mM ml(-1) where as Vmax decreased from 8,411 to 7,450 U ml(-1 )min(-1) as compared to free enzyme. The immobilization significantly increased the stability of maltase against various temperatures and immobilized maltase retain 100% of its original activity after 2 h at 50 °C, whereas the free maltase only showed 60% residual activity under same condition. The reusability of entrapped maltase showed activity up to 12 cycles and retained 50% of activity even after 5th cycle. Storage stability of agar entrapped maltase retain 73% of its initial activity even after 2 months when stored at 30 °C while free enzyme showed only 37% activity at same storage conditions.

  18. Sample Diluter for Detecting Hypergolic Propellants and other Toxic or Hazardous Gases

    NASA Technical Reports Server (NTRS)

    Barile, R. G.; Hodge, T. R.; Meneghelli, B. J.; Gursky, R.; Lueck, D. E.

    1997-01-01

    Hardware was developed to dilute vapor samples of purged hypergolic propellants (with air) into the range of existing instruments for detection of such toxic vapors. Since these detectors are normally used to monitor at the threshold limit value (TLV), most do not have quantitative capability at percent levels which relate to lower explosion limit (LEL) and fire hazards. For example, the upper limits of Energetic Sciences (ESI) 6000 series detectors used at KSC are 200 parts per million (ppm) for monomethyl hydrazine (MMH) and 500 ppm for nitrogen dioxide (NO2) arising from decomposition of nitrogen tetroxide (N2O4). Orbiter Processing Facility (OPF) personnel servicing Shuttle thrusters need to measure up to 250 ppm MMH and 7,500 ppm NO2 with portable, intrinsically safe instruments. Our objective was to quickly fabricate a sample diluter out of existing materials as a temporary measure while other parallel efforts were conducted to provide a commercial or in-house-developed instrument to detect high propellant levels. A 3 to 1 diluter would bring 500 ppm MMH into the range of the existing fuel ESI, and a 30 to 1 diluter would do the same for NO2. In this way, familiar equipment already available would be used, resulting in minimal paperwork, safety, and training impacts and low cost. An MMH vapor sample-diluter was constructed from a 1/4-inch Kynar tee, along with specially designed lengths of sample and dilution tubing. The sample line was 3 feet of Bev-A-Line 4, 1/4-inch tube leading to the straight run of the tee. The side run of the tee had a 17-inch length of Bev-A-Line 4, 1/4-inch tube, for nominal 3 to 1 dilution. A gas sample bag was prepared and assayed at 113 ppm ppm MMH, and diluted vapor samples were assayed at 39.5 ppm, or a measured dilution of 2.9 to 1. For NO2, a 316 stainless steel (SS) 1/8-inch tee with 49.5 inches of coiled, 1/8-inch outside diameter (OD) 316 SS tubing was used as the sampling end of the dilution system. The side run of the tee

  19. High-throughput culturing of fungi from plant litter by a dilution-to-extinction technique.

    PubMed

    Collado, Javier; Platas, Gonzalo; Paulus, Barbara; Bills, Gerald F

    2007-06-01

    High-throughput bacterial cultivation has improved the recovery of slow-growing and previously uncultured bacteria. The most robust high-throughput methods are based on techniques of 'dilution to extinction' or 'extinction culturing'. The low-density partitioning of CFUs in tubes or microwells exploits the fact that the number of culturable species typically increases as inoculum density decreases. Bacterial high-throughput culturing methods were adapted to fungi to generate large numbers of fungal extinction cultures. The efficiency of extinction culturing was assessed by comparing it with particle filtration and automated plate-streaking. Equal volumes of particle suspension from five litter collections of the New Zealand forest tree Elaeocarpus dentatus were compared. Dilute particle suspensions of litter were pipetted into 48-well tissue culture plates containing 1 mL of agar medium per well. Particle volumes from the same samples were applied to continuous agar surfaces in Omnitray plates by automated streaking, and fungal diversity and richness were measured. The spectrum of isolates was assessed by microscopy and sequencing of the ITS or 28S region of the rRNA gene. Estimates of species diversity between the two methods were comparable, but extinction culturing increased species richness. Compared with plating methods using continuous surfaces, extinction culturing distributes fungal propagules over partitioned surfaces. Intercolony interactions are reduced, permitting longer incubation times, and colony initiation and recovery improved. Effort to evaluate and recover colonies from fungal isolation plates was substantially reduced.

  20. Phytochemical and in vitro antimicrobial assay of the leaf extract of Newbouldia laevis.

    PubMed

    Usman, H; Osuji, J C

    2007-06-10

    The methanolic leaf extract of Newbouldia laevis was subjected to preliminary phytochemical screening and in-vitro antimicrobial tests. The extract revealed the presence of flavonoids, tannins, terpenes, steroidal and cardiac glycosides. The antimicrobial activity of the plant extract was assayed by the agar plate disc diffusion and nutrient broth dilution techniques. Test microorganisms were Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Salmonella typhi, Klebsiella spp. and Candida albicans; all the organisms were laboratory isolates. The extract inhibited the growth of all the test organisms especially against Klebsiella spp. and S. aureus which had mean inhibition zone of 42.3+/-1.5 and 32.3+/-1.5 mm respectively. The results showed minimum inhibitory concentration (MIC) of 1.563 mg/ml against Escherichia coli and Klebsiella spp. and 3.125 mg/ml against Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella typhi. The minimal bactericidal concentration (MBC) against Escherichia coli and Staphylococcus aureus was 0.39 mg/ml. This study has justified the traditional use of this plant for the treatment of stomach discomfort, diarrhea, dysentery and as a remedy for wound healing whose causative agents are some of the organisms used in this study.

  1. Universal growth of microdomains and gelation transition in agar hydrogels.

    PubMed

    Boral, Shilpi; Saxena, Anita; Bohidar, H B

    2008-03-27

    Investigations were carried out on aqueous sols and gels of agar (extracted from red seaweed Gelidiella acerosa) to explore the growth of microdomains en route to gelation. Isothermal frequency sweep studies on gel samples revealed master plots showing power-law dependence of gel elastic modulus, |G*|, on oscillation frequency, omega as |G*| approximately omegan, independent of temperature, with 0.5Tg). The S(q,t) behavior close to the gel transition point (Tg approximately (38+/-3 degrees C determined from rheology) followed a stretched exponential function: S(t)=A exp(-t/ts)beta. The beta factor increased from 0.25 to 1 as the gel temperature approached 25 degrees C from Tg, and relaxation time, ts, showed a peak at T approximately 30 degrees C. The SLS data (in the sol state) suggested the scaling of scattered intensity, Is(q) approximately epsilon(-gamma) (epsilon=(T/Tg-1), T>Tg) with gamma=0.13+/-0.03, and the presence of two distinct domains characterized by a Guinier regime (low q) and a power-law regime (high q). Close to and above Tg (+2 degrees C), IS(q) scaled with q as Is(q) approximately q(-alpha) with alpha=2.2+/-0.2, which decreased to 1.4+/-1 just below Tg (-2 degrees C), implying a coil-helix transition for 0.2% (w/v) and 0.3% (w/v) samples. For a 0.01% sample, alpha=3.5+/-0.5 which

  2. A Hidden Pitfall in the Preparation of Agar Media Undermines Microorganism Cultivability

    PubMed Central

    Tanaka, Tomohiro; Kawasaki, Kosei; Daimon, Serina; Kitagawa, Wataru; Yamamoto, Kyosuke; Tamaki, Hideyuki; Tanaka, Michiko; Nakatsu, Cindy H.

    2014-01-01

    Microbiologists have been using agar growth medium for over 120 years. It revolutionized microbiology in the 1890s when microbiologists were seeking effective methods to isolate microorganisms, which led to the successful cultivation of microorganisms as single clones. But there has been a disparity between total cell counts and cultivable cell counts on plates, often referred to as the “great plate count anomaly,” that has long been a phenomenon that still remains unsolved. Here, we report that a common practice microbiologists have employed to prepare agar medium has a hidden pitfall: when phosphate was autoclaved together with agar to prepare solid growth media (PT medium), total colony counts were remarkably lower than those grown on agar plates in which phosphate and agar were separately autoclaved and mixed right before solidification (PS medium). We used a pure culture of Gemmatimonas aurantiaca T-27T and three representative sources of environmental samples, soil, sediment, and water, as inocula and compared colony counts between PT and PS agar plates. There were higher numbers of CFU on PS medium than on PT medium using G. aurantiaca or any of the environmental samples. Chemical analysis of PT agar plates suggested that hydrogen peroxide was contributing to growth inhibition. Comparison of 454 pyrosequences of the environmental samples to the isolates revealed that taxa grown on PS medium were more reflective of the original community structure than those grown on PT medium. Moreover, more hitherto-uncultivated microbes grew on PS than on PT medium. PMID:25281372

  3. Detection of Agar, by Analysis of Sugar Markers, Associated with Bacillus Anthracis Spores, After Culture

    SciTech Connect

    Wunschel, David S.; Colburn, Heather A.; Fox, Alvin; Fox, Karen F.; Harley, William M.; Wahl, Jon H.; Wahl, Karen L.

    2008-08-01

    Detection of small quantities of agar associated with spores of Bacillus anthracis could provide key information regarding its source or growth characteristics. Agar, widely used in growth of bacteria on solid surfaces, consists primarily of repeating polysaccharide units of 3,6-anhydro-L-galactose (AGal) and galactose (Gal) with sulfated and O-methylated galactoses present as minor constituents. Two variants of the alditol acetate procedure were evaluated for detection of potential agar markers associated with spores. The first method employed a reductive hydrolysis step, to stabilize labile anhydrogalactose, by converting to anhydrogalactitol. The second eliminated the reductive hydrolysis step simplifying the procedure. Anhydrogalactitol, derived from agar, was detected using both derivatization methods followed by gas chromatography-mass spectrometry (GC-MS) analysis. However, challenges with artefactual background (reductive hydrolysis) or marker destruction (hydrolysis) lead to the search for alternative sugar markers. A minor agar component, 6-O-methyl galactose (6-O-M gal), was readily detected in agar-grown but not broth-grown bacteria. Detection was optimized by the use of gas chromatography-tandem mass spectrometry (GC-MS-MS). With appropriate choice of sugar marker and analytical procedure, detection of sugar markers for agar has considerable potential in microbial forensics.

  4. A simple plate-assay for screening extracellular naringinase produced by streptomycetes.

    PubMed

    Caraveo, Leonela; Medina, Héctor; Rodríguez-Buenfil, Ingrid; Montalvo-Romero, Carlos; Evangelista-Martínez, Zahaed

    2014-07-01

    A simple plate-assay was developed with the purpose of detecting extracellular naringinase in streptomycetes. The naringin agar medium (NAM) was prepared by mixing carbon utilization medium (ISP9) and naringin. The clearing zones around colonies are correlated with the enzymatic activity. The assay validation was performed through the use of commercial naringinase (Penicillium decumbens).

  5. The Molecular Bacterial Load Assay Replaces Solid Culture for Measuring Early Bactericidal Response to Antituberculosis Treatment

    PubMed Central

    Mtafya, Bariki; Phillips, Patrick P. J.; Hoelscher, Michael; Ntinginya, Elias N.; Kohlenberg, Anke; Rachow, Andrea; Rojas-Ponce, Gabriel; McHugh, Timothy D.; Heinrich, Norbert

    2014-01-01

    We evaluated the use of the molecular bacterial load (MBL) assay, for measuring viable Mycobacterium tuberculosis in sputum, in comparison with solid agar and liquid culture. The MBL assay provides early information on the rate of decline in bacterial load and has technical advantages over culture in either form. PMID:24871215

  6. Membrane-assisted culture of fungal mycelium on agar plates for RNA extraction and pharmacological analyses.

    PubMed

    Lange, Mario; Müller, Carolin; Peiter, Edgar

    2014-05-15

    Fungal mycelium grown in liquid culture is easy to harvest for RNA extraction and gene expression analyses, but liquid cultures often develop rather heterogeneously. In contrast, growth of fungal mycelium on agar plates is highly reproducible. However, this biological material cannot be harvested easily for downstream analyses. This article describes a PVDF (polyvinylidene difluoride) membrane-assisted agar plate culture method that enables the harvest of mycelium grown on agar plates. This culture method leads to a strongly reduced variation in gene expression between biological replicates and requires less growth space as compared with liquid cultures.

  7. Growth characteristics of Bacillus anthracis compared to other Bacillus spp. on the selective nutrient media Anthrax Blood Agar and Cereus Ident Agar.

    PubMed

    Tomaso, Herbert; Bartling, Carsten; Al Dahouk, Sascha; Hagen, Ralf M; Scholz, Holger C; Beyer, Wolfgang; Neubauer, Heinrich

    2006-01-01

    Anthrax Blood Agar (ABA) and Cereus Ident Agar (CEI) were evaluated as selective growth media for the isolation of Bacillus anthracis using 92 B. anthracis and 132 other Bacillus strains from 30 species. The positive predictive values for the identification of B. anthracis on ABA, CEI, and the combination of both were 72%, 71%, and 90%, respectively. Thus, less than 10% of all species were misidentified using both nutrient media. Species which might be misidentified as B. anthracis were B. cereus, B. mycoides, and B. thuringiensis. Particularly, 30% of B. weihenstephanensis strains were misidentified as B. anthracis.

  8. Hexosaminidase assays.

    PubMed

    Wendeler, Michaela; Sandhoff, Konrad

    2009-11-01

    beta-Hexosaminidases (EC 3.2.1.52) are lysosomal enzymes that remove terminal beta-glycosidically bound N-acetylglucosamine and N-acetylgalactosamine residues from a number of glycoconjugates. Reliable assay systems are particularly important for the diagnosis of a family of lysosomal storage disorders, the GM2 gangliosidoses that result from inherited beta-hexosaminidase deficiency. More recently, aberrant hexosaminidase levels have also been found to be associated with a variety of inflammatory diseases. Apart from patient testing and carrier screening, practical in vitro assays are indispensable for the characterization of knock-out mice with potentially altered hexosaminidase activities, for detailed structure-function studies aimed at elucidating the enzymatic mechanism, and to characterize newly described enzyme variants from other organisms. The purpose of this article is to discuss convenient hexosaminidase assay procedures for these and other applications, using fluorogenic or chromogenic artificial substrates as well as the physiological glycolipid substrate GM2. Attempts are also made to provide an overview of less commonly used alternative techniques and to introduce recent developments enabling high-throughput screening for enzyme inhibitors.

  9. A fresh liver agar substrate for rearing small numbers of forensically important blow flies (Diptera: Calliphoridae)

    USGS Publications Warehouse

    Gruner, Susan V.; Slone, Daniel H.

    2014-01-01

    Forensically important calliphorids can be reared on a mixture of beef liver and agar. Small pieces of meat, especially fresh or frozen beef liver, will desiccate in 2–6 h, but this simple-to-make feeding substrate remains moist for at least 12 h at 25 and 30°C without desiccation, even in small (5 g) amounts. We determined the survivorship of small numbers of Chrysomya megacephala (F.) (first-instar larvae to adult eclosion) raised on 5 g of liver agar and fresh beef liver. We found that all larvae raised on 5 g of liver died due to desiccation, but survivorship on 5 g of liver agar was equivalent to that on larger (50 g) pieces of either liver agar or beef liver.

  10. A fresh liver agar substrate for rearing small numbers of forensically important blow flies (Diptera: Calliphoridae).

    PubMed

    Gruner, Susan V; Slone, Daniel H

    2014-05-01

    Forensically important calliphorids can be reared on a mixture of beef liver and agar. Small pieces of meat, especially fresh or frozen beef liver, will desiccate in 2-6 h, but this simple-to-make feeding substrate remains moist for at least 12 h at 25 and 30 degrees C without desiccation, even in small (5 g) amounts. We determined the survivorship of small numbers of Chrysomya megacephala (F.) (first-instar larvae to adult eclosion) raised on 5 g of liver agar and fresh beef liver. We found that all larvae raised on 5 g of liver died due to desiccation, but survivorship on 5 g of liver agar was equivalent to that on larger (50 g) pieces of either liver agar or beef liver.

  11. Proton beam writing of microstructures in Agar gel for patterned cell growth

    NASA Astrophysics Data System (ADS)

    Larisch, Wolfgang; Koal, Torsten; Werner, Ronald; Hohlweg, Marcus; Reinert, Tilo; Butz, Tilman

    2011-10-01

    A rather useful prerequisite for many biological and biophysical studies, e.g., for cell-cell communication or neuronal networks, is confined cell growth on micro-structured surfaces. Solidified Agar layers have smooth surfaces which are electrically neutral and thus inhibit receptor binding and cell adhesion. For the first time, Agar microstructures have been manufactured using proton beam writing (PBW). In the irradiated Agar material the polysaccharides are split into oligosaccharides which can easily be washed off leaving Agar-free areas for cell adhesion. The beam diameter of 1 μm allows the fabrication of compartments accommodating single cells which are connected by micrometer-sized channels. Using the external beam the production process is very fast. Up to 50 Petri dishes can be produced per day which makes this technique very suitable for biological investigations which require large throughputs.

  12. Genome Sequence of the Agar-Degrading Marine Bacterium Alteromonadaceae sp. Strain G7

    PubMed Central

    Kwak, Min-Jung; Song, Ju Yeon; Kim, Byung Kwon; Chi, Won-Jae; Kwon, Soon-Kyeong; Choi, Soobeom; Chang, Yong-Keun

    2012-01-01

    Here, we present the high-quality draft genome sequence of the agar-degrading marine gammaproteobacterium Alteromonadaceae sp. strain G7, which was isolated from coastal seawater to be utilized as a bioresource for production of agar-derived biofuels. The 3.91-Mb genome contains a number of genes encoding algal polysaccharide-degrading enzymes such as agarases and sulfatases. PMID:23209220

  13. Isolation of Asticcacaulis sp. SA7, a novel agar-degrading alphaproteobacterium.

    PubMed

    Hosoda, Akifumi; Sakai, Masao

    2006-03-01

    An agar-degrading bacterium, strain SA7, was isolated from plant roots cultivated in soil. Analysis of the 16S rDNA sequence showed that strain SA7 is affiliated with the genus Asticcacaulis. Strain SA7 produced extracellular agarase, and grew utilizing agar in the culture medium as sole carbon source. Zymogram analysis showed that strain SA7 extracellularly secreted single agarase protein (about 70 kDa).

  14. Low density, microcellular, dopable, agar/gelatin foams for pulsed power experiments

    SciTech Connect

    McNamara, W.F.; Aubert, J.H.

    1997-04-01

    Low-density, microcellular foams prepared from the natural polymers agar and gelatin have been developed for pulsed-power physics experiments. Numerous experiments were supported with foams having densities at or below 10 mg/cm{sup 3}. For some of the experiments, the agar/gelatin foam was uniformly doped with metallic elements using soluble salts. Depending on the method of preparation, cell sizes were typically below 10 microns and for one process were below 1.0 micron.

  15. Growth and phenotypic characterization of Legionella species on semisolid media made with washed agar.

    PubMed Central

    Rogers, J E; Jones, G W; Engleberg, N C

    1993-01-01

    Legionella pneumophila (and 28 Legionella species) grew efficiently on charcoal-free, buffered yeast extract medium made with washed agar and without apparent loss of infectivity for U937 cells. Because charcoal-free, buffered yeast extract is transparent, it is a suitable base for indicator media and pigment detection. In standard media, charcoal apparently prevents agar contaminants from inhibiting Legionella growth. Images PMID:8417021

  16. [GROWTH OF MICROMYCETES FROM DIFFERENT ECOLOGICAL NICHES ON AGAR NUTRIENT MEDIA].

    PubMed

    Kurchenko, I M; Yurieva, E M; Voychuk, S I

    2015-01-01

    Radial growth rate of (K(r)) 153 strains 6 species of micromycetes from different ecological niches was studied on 7 agar media: three standard (malt extract agar, potato-dextrose agar, Czapek's agar), and on agar media with plant polymers (carboxymethylcellulose, xylan, soluble starch and apple pectin). Endophytic and plant pathogenic strains (biotrophs) of all studied species did not differ significantly in their ability to grow on nutrient media of different composition--average values of K(r) for these two groups were the same (0,200 and 0,199 mm/h, respectively). Soil micromycetes (saprophytes) characterized by the lowest average growth rate (0,169 mm/h) and significantly differed from the endophytic and plant pathogenic ones. Average of the radial growth rates of studied microscopic fungi were higher on standard nutrient media than with plant polymers ones. Growth parameters of endophytes and plant pathogens of all studied species on various agar media differed from the soil strains. High growth rate of endophytic and plant pathogenic strains of Fusarium poae, Alternaria alternata and Ceratocystis sp. provides them the rapid colonization of plants. Penicillium funiculosum strains equally can exist as saprophytes in soil and as endophytic plant symbionts. A wide range of K(r) variation of endophytic dark pigmented Mycelia sterilia indicates the presence in this group of different species of micromycetes, which have no sporulation.

  17. Complex impedance and conductivity of agar-based ion-conducting polymer electrolytes

    NASA Astrophysics Data System (ADS)

    Nwanya, A. C.; Amaechi, C. I.; Udounwa, A. E.; Osuji, R. U.; Maaza, M.; Ezema, F. I.

    2015-04-01

    Agar-based electrolyte standing films with different salts and weak acids as ion and proton conductors were prepared and characterized by X-ray diffraction, UV-visible spectrophotometry, photoluminescence emission spectroscopy and electrochemical impedance spectroscopy. The salts used are lithium perchlorate (LiClO4) and potassium perchlorate (KClO4), while the weak acids used are acetic acid (CH3COOH) and lactic acid (C3H6O3). The values of the ion conductivity obtained for the agar-based polymer films are 6.54 × 10-8, 9.12 × 10-8, 3.53 × 10-8, 2.24 × 10-8 S/cm for the agar/acetic acid, agar/lactic acid, agar/LiClO4 and agar/KClO4 polymer films, respectively. As a function of temperature, the ion conductivity exhibits an Arrhenius behavior and the estimated activation energy is ≈0.1 eV for all the samples. The samples depicted high values of dielectric permittivity toward low frequencies which is due mostly to electrode polarization effect. The samples showed very high transparency (85-98 %) in the visible region, and this high transparency is one of the major requirements for application in electrochromic devices (ECD). The values of conductivity and activation energy obtained indicate that the electrolytes are good materials for application in ECD.

  18. Evaluating survival of Escherichia coli O157:H7 in frozen and thawed apple cider: potential use of a hydrophobic grid membrane filter-SD-39 agar method.

    PubMed

    Sage, J R; Ingham, S C

    1998-04-01

    To determine the susceptibility of Escherichia coli O157:H7 to freezing and thawing in apple cider, methods that recover injured cells are needed for accurate enumeration. This study compared the ISO-GRID hydrophobic grid membrane filter (HGMF) SD-39 agar method to two other methods: a reference most probable number (MPN) method, and plating on sorbitol MacConkey agar (SMA). To determine numbers of injured cells, SMA spread plating was also compared to Trypticase soy agar (TSA) spread plating. Two strains of E. coli O157:H7 QA 326 and ATCC 43895, were inoculated into presterilized apple cider (10 ml) which was then frozen (-20 degrees C for 24 h). Samples were thawed at 4 degrees C for 4 h, or at 23 degrees C for 1.5 h, or in a microwave oven (700 W for 10 s). Substantial cell death (0.69- to 6.33 log10 CFU/ml decreases) and injury (0.70- to 2.38-log10 CFU/ml decreases) occurred during freezing and thawing. The extent of death and injury varied with strain and thawing method. The TSA spread plating method recovered the most cells while the HGMF method always recovered more viable cells than the reference MPN method and also either recovered significantly more (P < 0.05) cells or a not significantly different number of cells than SMA spread plating. Some injured cells of both strains were not counted by the HGMF method. Significant numbers of cells injured by freezing and thawing at 4 degrees C in apple cider were enumerated in the cider was diluted 1:2 Trypticase soy broth immediately before plating. Two epifluorescent microscopic methods showed that injury was not associated with loss of cell membrane integrity.

  19. Modification of kanamycin-esculin-azide agar to improve selectivity in the enumeration of fecal streptococci from water samples.

    PubMed Central

    Audicana, A; Perales, I; Borrego, J J

    1995-01-01

    Kanamycin-esculin-azide agar was modified by increasing the concentration of sodium azide to 0.4 g liter-1 and replacing kanamycin sulfate with 5 mg of oxolinic acid liter-1. The modification, named oxolinic acid-esculin-azide (OAA) agar, was compared with Slanetz-Bartley and KF agars by using drinking water and seawater samples. The OAA agar showed higher specificity, selectivity, and recovery efficiencies than those obtained by using the other media. In addition, no confirmation of typical colonies was needed when OAA agar was used, which significantly shortens the time of sample processing and increases the accuracy of the method. PMID:8534085

  20. A Direct Quantitative Agar-Plate Based Assay for Analysis of Pseudomonas protegens PF-5 Degradation of Polyurethane Films (Postprint)

    DTIC Science & Technology

    2014-10-02

    al., 2012) that can metabolize citrate for the degradation of ni- trates and aromatic compounds (Elefsiniotis et al., 2004; Yang et al., 2012). Citrate...detergent and DI water for 1 h, and 3 15 min sonicated rinses in DI water followed by a final sonicated rinse in 100% ethanol . Coupons were dried in a...regions. Removal of the culture from the coated coupons was attempted using either sonication, swabbing, or dipping of coupons in ethanol , but typically

  1. Helium Dilution Cryocooler for Space Applications

    NASA Technical Reports Server (NTRS)

    Roach, Pat; Hogan, Robert (Technical Monitor)

    2001-01-01

    NASA's New Millenium Program Space Technology presents the Helium Dilution Cryocooler for Space Applications. The topics include: 1) Capability; 2) Applications; and 3) Advantages. This paper is in viewgraph form.

  2. Development of a rapid ATP bioluminescence assay for biocidal susceptibility testing of rapidly growing mycobacteria.

    PubMed

    Kapoor, Renuka; Yadav, Jagjit S

    2010-10-01

    An ATP-based biocide susceptibility assay for mycobacteria was developed by optimizing the cell lysis and assay conditions. Compared to the conventional agar plating method, the assay was rapid (1.5 h) and showed high sensitivity and specificity as determined by receiver operating characteristic (ROC) analysis. The test species, Mycobacterium immunogenum, M. chelonae, and M. abscessus, showed various susceptibilities to the glutaraldehyde- and isothiazolone-based test biocides.

  3. Performance of CHROMAGAR candida and BIGGY agar for identification of yeast species

    PubMed Central

    Yücesoy, Mine; Marol, Serhat

    2003-01-01

    Background The importance of identifying the pathogenic fungi rapidly has encouraged the development of differential media for the presumptive identification of yeasts. In this study two differential media, CHROMagar Candida and bismuth sulphite glucose glycine yeast agar, were evaluated for the presumptive identification of yeast species. Methods A total number of 270 yeast strains including 169 Candida albicans, 33 C. tropicalis, 24 C. glabrata, 18 C. parapsilosis, 12 C. krusei, 5 Trichosporon spp., 4 C. kefyr, 2 C. lusitaniae, 1 Saccharomyces cerevisiae and 1 Geotrichum candidum were included. The strains were first identified by germ tube test, morphological characteristics on cornmeal tween 80 agar and Vitek 32 and API 20 C AUX systems. In parallel, they were also streaked onto CHROMagar Candida and bismuth sulphite glucose glycine yeast agar plates. The results were read according to the color, morphology of the colonies and the existance of halo around them after 48 hours of incubation at 37°C. Results The sensitivity and specificity values for C. albicans strains were found to be 99.4, 100% for CHROMagar Candida and 87.0, 75.2% for BiGGY agar, respectively. The sensitivity of CHROMagar Candida to identify C. tropicalis, C. glabrata and C. krusei ranged between 90.9 and 100% while the specificity was 100%. The sensitivity rates for BiGGY agar were 66.6 and 100% while the specificity values were found to be 95.4 and 100% for C. tropicalis and C. krusei, respectively. Conclusions It can be concluded that the use of CHROMagar Candida is an easy and reliable method for the presumptive identification of most commonly isolated Candida species especially C. albicans, C. tropicalis and C. krusei. The lower sensitivity and specificity of BiGGY agar to identify commonly isolated Candida species potentially limits the clinical usefulness of this agar. PMID:14613587

  4. Mass production of spores of lactic acid-producing Rhizopus oryzae NBRC 5384 on agar plate.

    PubMed

    Yamane, Tsuneo; Tanaka, Ryosuke

    2013-01-01

    Mass production of sporangiospores (spores) of Rhizopus oryzae NBRC 5384 (identical to NRRL 395 and ATCC 9363) on potato-dextrose-agar medium was studied aiming at starting its L(+)-lactic acid fermentation directly from spore inoculation. Various parameters including harvest time, sowed spore density, size of agar plate, height of air space, and incubation mode of plate (agar-on-bottom or agar-on-top) were studied. Ordinarily used shallow Petri dishes were found out to be unsuitable for the full growth of R. oryzae sporangiophores. In a very wide range of the sowed spore density, the smaller it was, the greater the number of the harvested spores was. It was also interesting to find out that R. oryzae grown downward vertically with a deep air space in an agar-on-top mode gave larger amount of spores than in an agar-on-bottom mode at 30°C for 7-day cultivation. Scale-up of the agar plate culture from 26.4 to 292 cm(2) was studied, resulting in the proportional relationship between the number of the harvested spores/plate and the plate area in the deep Petri dishes. The number of plates of 50 cm in diameter needed for 100 m(3) industrial submerged fermentation started directly from 2 × 10(5) spores/mL inoculum size was estimated as about 6, from which it was inferred that such a fermentation would be feasible. Designing a 50 cm plate and a method of spreading and collecting the spores were suggested. Bioprocess technological significance of the "full-scale industrial submerged fermentation started directly from spore inoculation omitting pre-culture" has been discussed.

  5. Evaluation of CP Chromo Select Agar for the enumeration of Clostridium perfringens from water.

    PubMed

    Manafi, Mammad; Waldherr, Kerstin; Kundi, Michael

    2013-10-01

    The European Directive on drinking water quality has included mCP agar as the reference method for recovering Clostridium perfringens from drinking waters. In the present study, three media (mCP, TSCF and CP Chromo Select Agar) were evaluated for recovery of C. perfringens in different surface water samples. Out of 139 water samples, using a membrane filtration technique, 131 samples (94.2%) were found to be presumptively positive for C. perfringens in at least one of the culture media. Green colored colonies on CP Chromo Select Agar (CCP agar) were counted as presumptive C. perfringens isolates. Out of 483 green colonies on CCP agar, 96.3% (465 strains, indole negative) were identified as C. perfringens, and 15 strains (3.1%) were indole positive and were identified as Clostridium sordellii, Clostridium bifermentans or Clostridium tetani. Only 3 strains (0.6%) gave false positive results and were identified as Clostridium fallax, Clostridium botulinum, and Clostridium tertium. Variance analysis of the data obtained shows statistically no significant differences in the counts obtained between media employed in this work. The mCP method is very onerous for routine screening and bacterial colonies could not be used for further biochemical testing. The colonies on CCP and TSCF were easy to count and subculture for confirmation tests. TSCF detects sulfite-reducing clostridia, including species other than C. perfringens, and in some cases excessive blackening of the agar frustrated counting of the colonies. If the contamination was too high, TSCF did not consistently produce black colonies and as a consequence, the colonies were white and gave false negative results. On the other hand, the identification of typical and atypical colonies isolated from all media demonstrated that CCP agar was the most useful medium for C. perfringens recovery in water samples.

  6. Dilution Refrigerator Technology for Scalable Quantum Computing

    DTIC Science & Technology

    2014-05-22

    has successfully designed, built, tested, and delivered a cryogen free dilution refrigerator for scalable quantum computing. This document is intended... Cryogenics , quantum computing REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR/MONITOR’S ACRONYM(S) ARO 8. PERFORMING...W911NF-10-C-0004. High Precision Devices, Inc. has successfully designed, built, tested, and delivered a cryogen free dilution refrigerator for

  7. Honey dilution impact on in vitro wound healing: Normoxic and hypoxic condition.

    PubMed

    Chaudhary, Amrita; Bag, Swarnendu; Barui, Ananya; Banerjee, Provas; Chatterjee, Jyotirmoy

    2015-01-01

    Honey is known as a popular healing agent against tropical infections and wounds. However, the effects of honey dilutions on keratinocyte (HaCaT) wound healing under hypoxic condition is still not explored. In this study, we examined whether honey dilution have wound healing potential under hypoxic stress. The antioxidant potential and healing efficacy of honey dilution on in vitro wound of human epidermal keratinocyte (HaCaT cells) under hypoxia (3% O2 ), and normoxia is explored by nitro blue tetrazolium assay. The cell survival % quantified by MTT assay to select four honey dilutions like 10, 1, 0.1, and 0.01 v/v% and the changes in cellular function was observed microscopically. Further, the cell proliferation, migration, cell-cell adhesion, and relevant gene expression were studied by flow cytometry, migration/scratch assay, immunocytochemistry, and reverse transcription-polymerase chain reaction, respectively. The expression pattern of cardinal molecular features viz. E-cadherin, cytoskeletal protein F-actin, p63, and hypoxia marker Hif 1α were examined. Honey dilution in 0.1% v/v combat wound healing limitations in vitro under normoxia and hypoxia (3%). Its wound healing potential was quantified by immunocytochemistry and real-time PCR for the associated molecular features that were responsible for cell proliferation and migration. Our data showed that honey dilution can be effective in hypoxic wound healing. Additionally, it reduced superoxide generation and supplied favorable bioambience for cell proliferation, migration, and differentiation during hypoxic wound healing. These findings may reveal the importance of honey as an alternative and cost effective therapeutic natural product for wound healing in hypoxic condition.

  8. Impact of dilution on microbial community structure and functional potential: comparison of numerical simulations and batch culture experiments

    NASA Technical Reports Server (NTRS)

    Franklin, R. B.; Garland, J. L.; Bolster, C. H.; Mills, A. L.

    2001-01-01

    A series of microcosm experiments was performed using serial dilutions of a sewage microbial community to inoculate a set of batch cultures in sterile sewage. After inoculation, the dilution-defined communities were allowed to regrow for several days and a number of community attributes were measured in the regrown assemblages. Based upon a set of numerical simulations, community structure was expected to differ along the dilution gradient; the greatest differences in structure were anticipated between the undiluted-low-dilution communities and the communities regrown from the very dilute (more than 10(-4)) inocula. Furthermore, some differences were expected among the lower-dilution treatments (e.g., between undiluted and 10(-1)) depending upon the evenness of the original community. In general, each of the procedures used to examine the experimental community structures separated the communities into at least two, often three, distinct groups. The groupings were consistent with the simulated dilution of a mixture of organisms with a very uneven distribution. Significant differences in community structure were detected with genetic (amplified fragment length polymorphism and terminal restriction fragment length polymorphism), physiological (community level physiological profiling), and culture-based (colony morphology on R2A agar) measurements. Along with differences in community structure, differences in community size (acridine orange direct counting), composition (ratio of sewage medium counts to R2A counts, monitoring of each colony morphology across the treatments), and metabolic redundancy (i.e., generalist versus specialist) were also observed, suggesting that the differences in structure and diversity of communities maintained in the same environment can be manifested as differences in community organization and function.

  9. Preparation, imaging, and quantification of bacterial surface motility assays.

    PubMed

    Morales-Soto, Nydia; Anyan, Morgen E; Mattingly, Anne E; Madukoma, Chinedu S; Harvey, Cameron W; Alber, Mark; Déziel, Eric; Kearns, Daniel B; Shrout, Joshua D

    2015-04-07

    Bacterial surface motility, such as swarming, is commonly examined in the laboratory using plate assays that necessitate specific concentrations of agar and sometimes inclusion of specific nutrients in the growth medium. The preparation of such explicit media and surface growth conditions serves to provide the favorable conditions that allow not just bacterial growth but coordinated motility of bacteria over these surfaces within thin liquid films. Reproducibility of swarm plate and other surface motility plate assays can be a major challenge. Especially for more "temperate swarmers" that exhibit motility only within agar ranges of 0.4%-0.8% (wt/vol), minor changes in protocol or laboratory environment can greatly influence swarm assay results. "Wettability", or water content at the liquid-solid-air interface of these plate assays, is often a key variable to be controlled. An additional challenge in assessing swarming is how to quantify observed differences between any two (or more) experiments. Here we detail a versatile two-phase protocol to prepare and image swarm assays. We include guidelines to circumvent the challenges commonly associated with swarm assay media preparation and quantification of data from these assays. We specifically demonstrate our method using bacteria that express fluorescent or bioluminescent genetic reporters like green fluorescent protein (GFP), luciferase (lux operon), or cellular stains to enable time-lapse optical imaging. We further demonstrate the ability of our method to track competing swarming species in the same experiment.

  10. Preparation and characterization of bio-nanocomposite films of agar and silver nanoparticles: laser ablation method.

    PubMed

    Rhim, Jong-Whan; Wang, Long-Feng; Lee, Yonghoon; Hong, Seok-In

    2014-03-15

    Silver nanoparticles (AgNPs) were prepared by a laser ablation method and composite films with the AgNPs and agar were prepared by solvent casting method. UV-vis absorbance test and transmission electron microscopy (TEM) analysis results revealed that non-agglomerated spherical AgNPs were formed by the laser ablation method. The surface color of the resulting agar/AgNPs films exhibited the characteristic plasmonic effect of the AgNPs with the maximum absorption peaks of 400-407 nm. X-ray diffraction (XRD) test results also exhibited characteristic AgNPs crystals with diffraction peaks observed at 2θ values of 38.39°, 44.49°, and 64.45°, which were corresponding to (111), (200), and (220) crystallographic planes of face-centered cubic (fcc) silver crystals, respectively. Thermogravimetric analysis (TGA) results showed that thermal stability of the agar/AgNPs composite films was increased by the inclusion of metallic silver. Water vapor barrier properties and surface hydrophobicity of the agar/AgNPs films increased slightly with the increase in AgNPs content but they were not statistically significant (p>0.05), while mechanical strength and stiffness of the composite films decreased slightly (p<0.05). The agar/AgNPs films exhibited distinctive antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli O157:H7) bacterial pathogens.

  11. Strongyloidiasis detected by the agar plate culture method among patients infected by HIV.

    PubMed

    Urdez-Hernández, E; Jiménez-Galán, S; Antonio-Manríquez, M; DE León-Juárez, E A; Terrazas-Estrada, J J; Hernández-García, M C; García-Zaldívar, P; Estrada-Aguilera, A

    1999-10-01

    To evaluate the rate of strongyloidiasis among HIV/AIDS patients, stools and duodenal juice were examined using the agar plate culture method. From January to June 1993, a total of 60 HIV/AIDS patients were required for duodenal aspirate and three serial samples of freshly passed stools. Stools and duodenal aspirate were dispensed on an agar plate culture; after incubation at 28 degrees C during 48 h, screening of plates was made at 10 x. The presence of furrows and worms of short buccal chamber and prominent genital primordium were positive for Strongyloides stercoralis. Most patients were men (91.7%); their mean age, of 33.9 years (SD +/- 10.6); their median CD4(+) T-cells count, of 105/microL (range of 12 to 646). S. stercoralis was detected in three patients (5%). In duodenal juice, the three patients showed the parasite, but in feces, only two (3.3%). In these two individuals, the worms were found in feces by agar culture and Faust's concentration method. The rate of S. stercoralis in feces of HIV/AIDS individuals (3.3%) by agar culture method was similar to that formerly reported from the general Mexican population (2.9%) using standard concentration procedures. Hence, in this immunocompromised population of a low prevalence city, there was no advantage to using an agar plate culture for strongyloidiasis.

  12. Characterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose.

    PubMed

    Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2014-09-22

    Crystallized nanocellulose (CNC) was separated from paper-mulberry (Broussonetia kazinoki Siebold) bast pulp by sulfuric acid hydrolysis method and they were blended with agar to prepare bionanocomposite films. The effect of CNC content (1, 3, 5 and 10 wt% based on agar) on the mechanical, water vapor permeability (WVP), and thermal properties of the nanocomposites were studied. Changes of the cellulose fibers in structure, morphology, crystallinity, and thermal properties of the films were evaluated using FT-IR, TEM, SEM, XRD, and TGA analysis methods. The CNC was composed of fibrous and spherical or elliptic granules of nano-cellulose with sizes of 50-60 nm. Properties of agar film such as mechanical and water vapor barrier properties were improved significantly (p<0.05) by blending with the CNC. The tensile modulus and tensile strength of agar film increased by 40% and 25%, respectively, in the composite film with 5 wt% of CNC, and the WVP of agar film decreased by 25% after formation of nanocomposite with 3 wt% of CNC. The CNC obtained from the paper-mulberry bast pulp can be used as a reinforcing agent for the preparation of bio-nanocomposites, and they have a high potential for the development of completely biodegradable food packaging materials.

  13. Strategies to improve the mechanical strength and water resistance of agar films for food packaging applications.

    PubMed

    Sousa, Ana M M; Gonçalves, Maria P

    2015-11-05

    Agar films possess several properties adequate for food packaging applications. However, their high cost-production and quality variations caused by physiological and environmental factors affecting wild seaweeds make them less attractive for industries. In this work, native (NA) and alkali-modified (AA) agars obtained from sustainably grown seaweeds (integrated multi-trophic aquaculture) were mixed with locust bean gum (LBG) to make 'knife-coated' films with fixed final concentration (1 wt%) and variable agar/LBG ratios. Agar films were easier to process upon LBG addition (viscosity increase and gelling character decrease of the film-forming solutions observed by dynamic oscillatory and steady shear measurements). The mechanical properties and water resistance were optimal for films with 50 and/or 75% LBG contents and best in the case of NA (cheaper to extract). These findings can help reduce the cost-production of agar packaging films. Moreover, the controlled cultivation of seaweeds can provide continuous and reliable feedstock for transformation industries.

  14. Comparison of agar-based media for primary isolation of glycopeptide-resistant enterococci.

    PubMed

    Chadwick, P. R.; Brown, D. F. J.; Wilcox, M. H.; Collyns, T. A.; Walpole, E.; Dillon, J.; Smith, R.; Gopal Rao, G.; Oppenheim, B. A.

    1997-01-01

    OBJECTIVE: To compare four vancomycin-containing agar media for the isolation of glycopeptide-resistant enterococci (GRE) from clinical fecal specimens: kanamycin---aesculin---azide (KAA) agar; bile---aesculin---polymixin (BAP) agar; aztreonam---amphotericin blood (CBAA) agar; and neomycin blood (CBN) agar. METHODS: Fecal specimens from 125 patients were inoculated onto each medium. Media were examined for enterococci after incubation for up to 48 h. Enterococci were identified to species level, and glycopeptide phenotypes were determined by measuring minimum inhibitory concentrations of vancomycin and teicoplanin. RESULTS: GRE were isolated from 44/125 samples. Enterococcus faecalis and Enterococcus faecium isolates, expressing glycopeptide resistance of the VanA or VanB phenotypes, were recovered from 27/33 (82%) specimens on BAP medium, 26/33 (79%) on KAA medium, and 21/33 (64%) on CBN and CBAA media. Enterococcus gallinarum and Enterococcus casseliflavus isolates expressing low-level glycopeptide resistance (VanC phenotype) were recovered from 14/15 (93%) specimens on CBAA medium, 7/15 (47%) on KAA and CBN media, and 6/15 (40%) on BAP medium. CONCLUSIONS: The media tested in this study, with the exception of CBN medium, detected at least 75% of patients colonized by GRE. Further development of BAP, CBAA and KAA media is warranted to improve growth and selectivity.

  15. Antimicrobial and physical-mechanical properties of agar-based films incorporated with grapefruit seed extract.

    PubMed

    Kanmani, Paulraj; Rhim, Jong-Whan

    2014-02-15

    The use of synthetic petroleum based packaging films caused serious environmental problems due to their difficulty in recycling and poor biodegradability. Therefore, present study was aimed to develop natural biopolymer-based antimicrobial packaging films as an alternative for the synthetic packaging films. As a natural antimicrobial agent, grapefruit seed extract (GSE) has been incorporated into agar to prepare antimicrobial packaging film. The films with different concentrations of GSE were prepared by a solvent casting method and the resulting composite films were examined physically and mechanically. In addition, the films were characterized by FE-SEM, XRD, FT-IR and TGA. The incorporation of GSE caused increase in color, UV barrier, moisture content, water solubility and water vapor permeability, while decrease in surface hydrophobicity, tensile strength and elastic modulus of the films. As the concentration of GSE increased from 0.6 to 13.3 μg/mL, the physical and mechanical properties of the films were affected significantly. The addition of GSE changed film microstructure of the film, but did not influence the crystallinity of agar and thermal stability of the agar-based films. The agar/GSE films exhibited distinctive antimicrobial activity against three test food pathogens, such as Listeria monocytogenes, Bacillus cereus and Escherichia coli. These results suggest that agar/GSE films have potential to be used in an active food packaging systems for maintaining food safety and extending the shelf-life of the packaged food.

  16. Effects of shape and size of agar gels on heating uniformity during pulsed microwave treatment.

    PubMed

    Soto-Reyes, Nohemí; Temis-Pérez, Ana L; López-Malo, Aurelio; Rojas-Laguna, Roberto; Sosa-Morales, María Elena

    2015-05-01

    Model gel systems with different shape (sphere, cylinder, and slab) and size (180 and 290 g) were prepared with agar (5%) and sucrose (5%). Dielectric constant (ε'), loss factor (ε"), thermophysical properties, and temperature distribution of the model system were measured. Each agar model system was immersed and suspended in water, and then, heated in a microwave oven with intermittent heating until the core temperature reached 50 °C. The ε' and ε" of agar gels decreased when frequency increased. The density and thermal conductivity values of the agar gels were 1033 kg/m(3) and 0.55 W/m °C, respectively. The temperature distribution of sphere, cylinder, and slab was different when similar power doses were applied. The slab reached 50 °C in less time (10 min) and showed a more uniform heating than spheres and cylinders in both sizes. Agar model systems of 180 g heated faster than those of 290 g. The coldest point was the center of the model systems in all studied cases. Shape and size are critical food factors that affect the heating uniformity during microwave heating processes.

  17. Genotoxicity Assessment of Chlorotrifluoroethylene Tetramer Acid using a Battery of In Vitro and In Vivo/In Vitro Assays

    DTIC Science & Technology

    1990-12-01

    thy:’ f’yl)- phthalate: An industrial plastieizer induces hypolipidemia and 3nhncl:ci hepatic catalase and carnitine acetyltransferase activities in...assay, the top agar was melted and supplemented with a sterile solution that contained 0.5 mM L-histidine and 0.5 mM D-biotin (10% v/v). Minimal...Bottom Agar: The bottom agar was Vogel-Bonner minimal medium E (Vogel and Bonner, 1956), supplemented with 0.2% (w/v) glucose. Nutrient Broth: The

  18. Homogeneous Matrix Deposition on Dried Agar for MALDI Imaging Mass Spectrometry of Microbial Cultures

    NASA Astrophysics Data System (ADS)

    Hoffmann, Thomas; Dorrestein, Pieter C.

    2015-11-01

    Matrix deposition on agar-based microbial colonies for MALDI imaging mass spectrometry is often complicated by the complex media on which microbes are grown. This Application Note demonstrates how consecutive short spray pulses of a matrix solution can form an evenly closed matrix layer on dried agar. Compared with sieving dry matrix onto wet agar, this method supports analyte cocrystallization, which results in significantly more signals, higher signal-to-noise ratios, and improved ionization efficiency. The even matrix layer improves spot-to-spot precision of measured m/z values when using TOF mass spectrometers. With this technique, we established reproducible imaging mass spectrometry of myxobacterial cultures on nutrient-rich cultivation media, which was not possible with the sieving technique.

  19. Possible influence of surfactants and proteins on the efficiency of contact agar microbiological surface sampling.

    PubMed

    Deckers, Sylvie M; Sindic, Marianne; Anceau, Christine; Brostaux, Yves; Detry, Jean G

    2010-11-01

    Agar contact microbiological sampling techniques, based on a transfer of the microorganisms present on a surface to a culture medium, are widely used to assess and control surface cleanliness and to evaluate microbial contamination levels. The effectiveness of these techniques depends on many environmental parameters that influence the strength of attachment of the bacteria to the surface. In the present study, stainless steel and high density polyethylene surfaces were inoculated with known concentrations of Staphylococcus epidermidis. Following an experimental design, the surfaces were sampled with different types of replicate organism direct agar contact plates and Petrifilm; results indicated that recovery rates were influenced by the presence of egg white albumin or Tween 80 in the inoculum solutions or by the introduction of surfactants into the contact agar of the microbiological sampling techniques. The techniques yielded significantly different results, depending on sampling conditions, underlining the need for a standardization of laboratory experiments to allow relevant comparisons of such techniques.

  20. [DNA and chemical analyses of commercial fly agaric-related products].

    PubMed

    Maruyama, Takuro; Kawahara, Nobuo; Fukiharu, Toshimitsu; Yokoyama, Kazumasa; Makino, Yukiko; Goda, Yukihiro

    2005-04-01

    Since June 6, 2002, psilocin and psilocybin-containing fungi (commonly called "magic mushrooms") have been regulated by the Narcotics and Psychotropics Control Law in Japan. However, various fly agaric-related products are now entering the Japanese market via the internet. In this study, fly agaric-related products available in this way were investigated for raw materials by DNA analysis and for additives by chemical analysis. Nucleotide sequence analysis of the mitochondrial 12S rDNA region suggested that these fly agaric-related products originate from A. muscaria or A. muscaria var. persicina. Furthermore, they were classified into three strains based on the ITS2-LSU nucleotide sequence. Harmine derivatives and/or tryptamine derivatives were detected in some of these products by LC/MS analysis. In accordance with this, the matK gene of Peganum harmala was found in all of the harmine derivative-containing samples.

  1. Expression of an accessory cell phenotype by hairy cells during lymphocyte colony formation in agar culture.

    PubMed

    Farcet, J P; Gourdin, M F; Testa, U; Andre, C; Jouault, H; Reyes, F

    1983-01-01

    Human T lymphocytes require the cooperation of accessory cells to generate lymphocyte colonies in agar culture under PHA stimulation. Various hairy cell enriched fractions, as well as normal monocytes, have been found to be able to initiate colony formation by normal lymphocytes. Leukemic monocytes from CMML patients were also effective, but not the leukemic lymphocytes from CLL patients. The phenotype expressed by HC in agar colonies was further studied using cell surface and enzymatic markers. We have concluded that HC in agar culture in the presence of both normal T lymphocytes and PHA lose the B phenotype that they express in vivo and function like an accessory cell in contrast to normal or leukemic B lymphocytes.

  2. Eradication of bovine leukemia virus infection in commercial dairy herds using the agar gel immunodiffusion test.

    PubMed Central

    Shettigara, P T; Samagh, B S; Lobinowich, E M

    1986-01-01

    Demands for bovine leukemia virus test negative breeding cattle and for semen from bovine leukemia virus test negative bulls by several countries have encouraged the eradication of bovine leukemia virus infection from selected herds in Canada. This project was undertaken to evaluate the suitability of the agar gel immunodiffusion test, standardized to detect anti-bovine leukemia virus glycoprotein antibodies, for eradication of bovine leukemia virus from commercial dairy herds. Of nine participating herds, the prevalence rate of bovine leukemia virus infection was low (less than 10%) in three, medium (11-30%) in four and high (greater than 30%) in two. The herds were tested by the agar gel immunodiffusion test, reactors were removed and the herds were then retested at regular intervals. The results indicate that it is possible to eliminate bovine leukemia virus infection from the herds after two to three cycles of agar gel immunodiffusion tests and prompt removal of the reactors. PMID:3019498

  3. Use of Rambach Propylene Glycol Containing Agar for identification of Salmonella spp.

    PubMed

    Gruenewald, R; Henderson, R W; Yappow, S

    1991-10-01

    When grown on Rambach Propylene Glycol Containing Agar (Rambach agar), 216 of 230 (93.9%) Salmonella organisms isolated from patients and 54 of 62 (87.1%) Salmonella stock cultures produced a crimson-colored growth. Of the 14 clinical Salmonella isolates which displayed colors other than crimson, 8 were Salmonella typhi, 2 were Salmonella paratyphi A, and 4 belonged to other commonly isolated serotypes. All eight Salmonella stock cultures which failed to produce a crimson color belonged to rarely isolated serotypes. In contrast, of 83 non-Salmonella stock cultures distributed among 29 bacterial species, none produced a crimson color. These results suggest that while Rambach agar cannot preidentify S. typhi and S. paratyphi A, the medium can be used for the presumptive identification and can assist in the definitive identification of the overwhelming majority of Salmonella isolates.

  4. [Presumptive identification of Candida spp. and other clinically important yeasts: usefulness of Brilliance Candida Agar].

    PubMed

    Alfonso, Claudia; López, Mónica; Arechavala, Alicia; Perrone, María Del Carmen; Guelfand, Liliana; Bianchi, Mario

    2010-06-30

    Fungal infections caused by yeasts have increased during the last decades and invasive forms represent a serious problem for human health. Candida albicans is the species most frequently isolated from clinical samples. However, other emerging yeast pathogens are increasingly responsible for mycotic infections, and some of them are resistant to some antifungal drugs. Consequently, it is necessary to have methods that can provide a rapid presumptive identification at species level. Numerous chromogenic agar media have been shown to be of value as diagnostic tools. We have compared a chromogenic medium, Brilliance Candida Agar, with CHROMagar Candida, the chromogenic medium most used in our country. A multicentre study was conducted in 16 Hospitals belonging to the Mycology Net of Buenos Aires City Government. A total of 240 yeast isolates were included in this research. The new chromogenic agar showed results very similar to those obtained with CHROMagar Candida.

  5. Agar blue localization of small pulmonary nodules and ground glass opacifications for thoracoscopic resection

    PubMed Central

    2016-01-01

    Background Screening for lung cancer using high resolution computed tomography (CT) has produced encouraging early results. Extremely small nodules and non-palpable areas of opacifications are able to be detected, but pose a challenge to the thoracic surgeon trying to resect these areas. Methods Forty five patients with ground glass opacifications (GGOs) or small pulmonary nodules underwent pre-operative CT-guided placement of methylene blue dyed agar and/or hook wire needle localization prior to thoracoscopic resection. Progel was applied to any intraoperative air leaks observed after successful resection. Results All lesions were successfully excised thoracoscopically. The blue agar aided in localization of these areas and did not affect the histological architecture during pathologic evaluation. Conclusions Careful pre-operative evaluation and planning, including use of selective CT-guided blue agar localization and hook wire placement, may greatly assist in thoracoscopically locating and resecting these often difficult-to-visualize lesions. PMID:28066669

  6. Agar-block microcosms for controlled plant tissue decomposition by aerobic fungi.

    PubMed

    Schilling, Jonathan S; Jacobson, K Brook

    2011-02-03

    The two principal methods for studying fungal biodegradation of lignocellulosic plant tissues were developed for wood preservative testing (soil-block; agar-block). It is well-accepted that soil-block microcosms yield higher decay rates, fewer moisture issues, lower variability among studies, and higher thresholds of preservative toxicity. Soil-block testing is thus the more utilized technique and has been standardized by American Society for Testing and Materials (ASTM) (method D 1413-07). The soil-block design has drawbacks, however, using locally-variable soil sources and in limiting the control of nutrients external (exogenous) to the decaying tissues. These drawbacks have emerged as a problem in applying this method to other, increasingly popular research aims. These modern aims include degrading lignocellulosics for bioenergy research, testing bioremediation of co-metabolized toxics, evaluating oxidative mechanisms, and tracking translocated elements along hyphal networks. Soil-blocks do not lend enough control in these applications. A refined agar-block approach is necessary. Here, we use the brown rot wood-degrading fungus Serpula lacrymans to degrade wood in agar-block microcosms, using deep Petri dishes with low-calcium agar. We test the role of exogenous gypsum on decay in a time-series, to demonstrate the utility and expected variability. Blocks from a single board rip (longitudinal cut) are conditioned, weighed, autoclaved, and introduced aseptically atop plastic mesh. Fungal inoculations are at each block face, with exogenous gypsum added at interfaces. Harvests are aseptic until the final destructive harvest. These microcosms are designed to avoid block contact with agar or Petri dish walls. Condensation is minimized during plate pours and during incubation. Finally, inoculum/gypsum/wood spacing is minimized but without allowing contact. These less technical aspects of agar-block design are also the most common causes of failure and the key source of

  7. The classical pink-eyed dilution mutation affects angiogenic responsiveness.

    PubMed

    Rogers, Michael S; Boyartchuk, Victor; Rohan, Richard M; Birsner, Amy E; Dietrich, William F; D'Amato, Robert J

    2012-01-01

    Angiogenesis is the process by which new blood vessels are formed from existing vessels. Mammalian populations, including humans and mice, harbor genetic variations that alter angiogenesis. Angiogenesis-regulating gene variants can result in increased susceptibility to multiple angiogenesis-dependent diseases in humans. Our efforts to dissect the complexity of the genetic diversity that regulates angiogenesis have used laboratory animals due to the availability of genome sequence for many species and the ability to perform high volume controlled breeding. Using the murine corneal micropocket assay, we have observed more than ten-fold difference in angiogenic responsiveness among various mouse strains. This degree of difference is observed with either bFGF or VEGF induced corneal neovascularization. Ongoing mapping studies have identified multiple loci that affect angiogenic responsiveness in several mouse models. In this study, we used F2 intercrosses between C57BL/6J and the 129 substrains 129P1/ReJ and 129P3/J, as well as the SJL/J strain, where we have identified new QTLs that affect angiogenic responsiveness. In the case of AngFq5, on chromosome 7, congenic animals were used to confirm the existence of this locus and subcongenic animals, combined with a haplotype-based mapping approach that identified the pink-eyed dilution mutation as a candidate polymorphism to explain AngFq5. The ability of mutations in the pink-eyed dilution gene to affect angiogenic response was demonstrated using the p-J allele at the same locus. Using this allele, we demonstrate that pink-eyed dilution mutations in Oca2 can affect both bFGF and VEGF-induced corneal angiogenesis.

  8. Plaque assay for virulent Legionella pneumophila.

    PubMed Central

    Fernandez, R C; Lee, S H; Haldane, D; Sumarah, R; Rozee, K R

    1989-01-01

    Methods of assessing virulence of Legionella pneumophila, the etiologic agent of Legionnaires disease, include the infection of guinea pigs, fertile chicken eggs, and mammalian and protozoan cell cultures. Guinea pig assays, in particular, are expensive, laborious, or unsuitable for routine screening of Legionella isolates. We have developed a virulence assay that requires the enumeration of viruslike plaques which are the result of virulent L. pneumophila infecting mouse L929 cells. Each plaque is the consequence of the initial infection of an L cell with a single bacterium. A nonvirulent mutant derived from the serial passage of virulent L. pneumophila on Mueller-Hinton agar fails to survive within L cells and consequently fails to produce plaques. Images PMID:2674192

  9. New Agar Technique Compared with Sand Flotation for Obtaining Salt Marsh Culicoides mississippiensis Hoffman (Diptera: Ceratopogonidae) Larvae,

    DTIC Science & Technology

    1979-12-26

    compared with 1% and 2% (wt/v) agar formulations for extracting Culicoides ndisaiooippiensis Hoffman larvae from marsh soil samples. The 1% agar formula...been used to recover larvae of biting midges (CuZ.,o;1aa spp .) from salt marsh substrate (soil) samples. They are: (1) sieve-flotation (Kettle and Lawson...Kettle et al., (1975) in which tabanid and culicoid larvae were successfully reared in agar media, we decided that one possibility was to replace the

  10. Diluted magnetic semiconductor nanowires exhibiting magnetoresistance

    DOEpatents

    Yang, Peidong; Choi, Heonjin; Lee, Sangkwon; He, Rongrui; Zhang, Yanfeng; Kuykendal, Tevye; Pauzauskie, Peter

    2011-08-23

    A method for is disclosed for fabricating diluted magnetic semiconductor (DMS) nanowires by providing a catalyst-coated substrate and subjecting at least a portion of the substrate to a semiconductor, and dopant via chloride-based vapor transport to synthesize the nanowires. Using this novel chloride-based chemical vapor transport process, single crystalline diluted magnetic semiconductor nanowires Ga.sub.1-xMn.sub.xN (x=0.07) were synthesized. The nanowires, which have diameters of .about.10 nm to 100 nm and lengths of up to tens of micrometers, show ferromagnetism with Curie temperature above room temperature, and magnetoresistance up to 250 Kelvin.

  11. Automatic dilution gaging of rapidly varying flow

    USGS Publications Warehouse

    Duerk, M.D.

    1983-01-01

    The analysis showed that the discharges measured by dye-dilution techniques were generally within ± 10 percent of the discharges determined from ratings established by current-meter measurements. Larger differences were noted at the start of and on the rising limb of four hydrographs. Of the 20 storms monitored, dilution measurements on 17 were of acceptable accuracy. Peak discharges from the open-channel site ranged from 0 to 12 percent departures from the existing rating whereas the comparison of peak discharge at the storm sewer site ranged from 0 to 5 percent departures from the existing rating.

  12. Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

    PubMed

    Falland-Cheung, Lisa; Piccione, Neil; Zhao, Tianqi; Lazarjan, Milad Soltanipour; Hanlin, Suzanne; Jermy, Mark; Waddell, J Neil

    2016-06-01

    Routine forensic research into in vitro skin/skull/brain ballistic blood backspatter behavior has traditionally used gelatin at a 1:10 Water:Powder (W:P) ratio by volume as a brain simulant. A limitation of gelatin is its high elasticity compared to brain tissue. Therefore this study investigated the use of dental alginate and agar impression materials as a brain simulant for ballistic testing. Fresh deer brain, alginate (W:P ratio 91.5:8.5) and agar (W:P ratio 81:19) specimens (n=10) (11×22×33mm) were placed in transparent Perspex boxes of the same internal dimensions prior to shooting with a 0.22inch caliber high velocity air gun. Quantitative analysis to establish kinetic energy loss, vertical displacement elastic behavior and qualitative analysis to establish elasticity behavior was done via high-speed camera footage (SA5, Photron, Japan) using Photron Fastcam Viewer software (Version 3.5.1, Photron, Japan) and visual observation. Damage mechanisms and behavior were qualitatively established by observation of the materials during and after shooting. The qualitative analysis found that of the two simulant materials tested, agar behaved more like brain in terms of damage and showed similar mechanical response to brain during the passage of the projectile, in terms of energy absorption and vertical velocity displacement. In conclusion agar showed a mechanical and subsequent damage response that was similar to brain compared to alginate.

  13. Use of Mueller-Hinton broth and agar in the germ tube test.

    PubMed

    Mattei, Antonella Souza; Alves, Sydney Hartz; Severo, Cecília Bittencourt; Guazzelli, Luciana da Silva; Oliveira, Flávio de Mattos; Severo, Luiz Carlos

    2014-01-01

    Candida albicans is often isolated from clinical samples, thus its presumptive differentiation from other species of the same genus can be based on its ability to form the germ tube in human serum. Nevertheless, there are two other species that share this characteristic: C. dubliniensis and C. africana. The aim of this study was to compare four different substrates to perform the germ tube (GT) test. The Candida spp. isolates were identified using a manual system (135 C. albicans, 24 C. tropicalis and one C. dubliniensis). The germ tube test was performed with fresh, previously frozen serum and Mueller-Hinton (MH) broth and agar. GT was observed in 96% (130/136) of the isolates through the fresh serum technique, 94% (128/136) through previously frozen serum, 92% (125/136) in MH agar, and 90% (122/136) in MH broth. The sensitivity of each test was higher than 90%, with 100% specificity. Both the MH agar and broth were able to identify the true positives, and false positives were not found. However, some C. albicans isolates were not identified. MH agar and broth may be used in laboratory for the rapid presumptive identification of C. albicans, as an alternative method for germ tube test.

  14. Alternative plasticizers for the production of thermo-compressed agar films

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully Electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  15. Use of bile-esculin agar for rapid differentiation of Enterobacteriaceae.

    PubMed Central

    Lindell, S S; Quinn, P

    1975-01-01

    Bile-esculin agar has been used for several years for the presumptive identification of group D streptococci. All members of the Enterobacteriaceae family will also grow on this medium, but only certain ones can hydrolyze esculin to 6,7-dihydroxycoumarin, which reacts with iron to produce a characteristic blackening of the medium. One thousand and six cultures from clinical specimens representing 20 genera were isolated and identified. Heavy inocula from fresh pure culture isolates on heart infusion agar were placed on bile-esculin agar slants and incubated at 35 C. The slants were examined at 4 h and again at 18 h for esculin hydrolysis. Shigella, Salmonella, Arizona, Proteus mirabilis, Proteus morganii, Providencia alcalifaciens, and Providencia stuartii all produced negative results. Klebsiella pneumoniae, Enterobacter aerogenes, Serratia marcescens, and Serratia rubidaea produced a positive reaction in 4 h. The other remaining eight genera exhibited varying results. The use of this medium in conjunction with triple sugar iron-lysine iron agar has been of great value in differentiating the Klebsiella-Enterobacter-Serratia group from other Enterobacteriaceae. PMID:1176613

  16. Evaluation of an Automated Instrument for Inoculating and Spreading Samples onto Agar Plates.

    PubMed

    Glasson, J H; Guthrie, L H; Nielsen, D J; Bethell, F A

    2008-04-01

    The findings from a preliminary assessment of a new instrument designed for the inoculation and spreading of specimens for microbiological analysis onto agar plates are described. The study found that the instrument was able to select full or biplates from a number of input cassettes, each containing different agar types. Samples were then inoculated by the instrument onto the agar surfaces and spread by a novel plastic applicator. Following this, the instrument labeled the plates and sorted them into a number of specified output stations. It was found that the instrument was able to inoculate and spread samples over a greater proportion of the agar plate surface than the manual loop-to-plate method. As a consequence, up to 44% more usable colonies were produced per plate from clinical specimens and standard cultures. Viable counts showed that the instrument was able to detect as few as 10(2) CFU/ml in fluids and also facilitated the enumeration of organisms, particularly in specimens such as urine.

  17. Development of hyperspectral imaging technique for salmonella enteritidis and typhimurium on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Salmonella is a common cause of foodborne disease resulting from the consumption of contaminated food products. Although a direct plating method is widely used for presumptive positive screening of pathogenic Salmonella colonies on agar plates, it is labor-intensive, time-consuming and also prone to...

  18. Analysis of beta-hemolysis in human blood agars by Streptococcus pyogenes.

    PubMed

    Zomorodian, Kamiar; Rahimi, Mohammad Javad; Safaei, Akbar; Bazargani, Abdollah; Motamadi, Marjan; Kharazi, Mahboobeh; Mostaghni, Setareh; Pakshir, Keyvan; Ghaedi, Hamid; Afsarian, Mohammad Hossein

    2011-06-01

    The aim of the study was to assess the reliability of human blood agar media (HuBA) in identifying Streptococcus pyogenes by hemolysis analysis. We analyze several factors that might affect the accuracy of HuBA media for microbial analysis, including incubation time, blood group, Rh factor and presence of antistreptolysin-o.

  19. Rapid diagnosis of acanthamoeba keratitis using non-nutrient agar with a lawn of E. coli

    PubMed Central

    2013-01-01

    Background A patient presented with a corneal foreign body in his only eye. He was treated with prophylactic antibiotics and sent home, but deteriorated. Findings He returned to the hospital 5 days later, and on slit-lamp examination, there was ciliary injection, corneal oedema and a 1 mm × 1 mm corneal abscess with mild anterior uveitis. Corneal scrapings were taken for culture on a non-nutrient agar with a lawn of Escherichia coli, on chocolate agar and on blood agar. He was treated with fortified gentamicin and cefazolin drops. He improved and was discharged 4 days after admission. On day 5, the culture results showed acanthamoeba. He was brought back to the hospital and treated with hourly chlorhexidine drops, ofloxacin six times daily and neomycin/dexamethasone drops once daily. On day 7, he was discharged to continue treatment at home, at which time his visual acuity in that eye was 6/9, and slit-lamp examination showed punctate keratitis and a stromal opacity with mild peripheral infiltration. Conclusions Culture on non-nutrient agar with a lawn of E. coli is a rapid, reliable and less invasive alternative to corneal biopsy for the diagnosis of acanthamoeba infection. We suggest using this method where acanthamoeba is suspected. Owing to the risk of corneal abscess, orthokeratology should be avoided in an amblyopic patient or an only eye. Acanthamoeba infection may be masked by other eye diseases. PMID:23514313

  20. Applying Agar's Concept of "Languaculture" to Explain Asian Students' Experiences in the Australian Tertiary Context

    ERIC Educational Resources Information Center

    Norris, Lindy; Tsedendamba, Nara

    2015-01-01

    This paper reports part of a broader qualitative case study of Asian students "translation" (Agar, 2006) to study in an Australian university. The paper is concerned with the experiences of eight participants and their involvement in a training programme in the use of language learning strategies (LLS) to support their engagement with…

  1. The relationship between growth in agar, karyotype and prognosis in acute leukaemia.

    PubMed

    Gustavsson, A; Mitelman, F; Olofsson, T; Olsson, I

    1984-04-01

    The growth pattern in agar culture and the karyotype of bone marrow cells were studied in 79 patients with untreated acute non-lymphocytic leukaemia (ANLL). Results were divided into the following groups: (A) colony and cluster formation; (B) growth of less than 600 small clusters per 10(5) cells; (C) growth of more than 600 small clusters; (D) no growth in agar. Cytogenetically, the patients were divided into 3 categories: NN, normal metaphases only; AN, both abnormal and normal metaphases and AA, abnormal metaphases only. An association was seen between growth pattern and karyotype: the majority of NN patients (33/37) belonged to group (A + B) while in group (C + D) 20/24 patients were AN or AA. 37 patients were prognostically evaluable. The growth pattern in agar but not the cytogenetic pattern had prognostic implications. 25 patients with acute lymphocytic leukaemia (ALL) were also studied at diagnosis. Different growth patterns in agar had no impact on prognosis. No relationship was detected between growth pattern and karyotype in ALL.

  2. Increased sensitivity of routine laboratory detection of Strongyloides stercoralis and hookworm by agar-plate culture.

    PubMed

    Jongwutiwes, S; Charoenkorn, M; Sitthichareonchai, P; Akaraborvorn, P; Putaporntip, C

    1999-01-01

    The efficacy of agar-plate culture has been evaluated for the detection of Strongyloides stercoralis and hookworm, compared with direct smear, the formalin-ether sedimentation technique and the filter-paper method. Of 1085 stool samples from the routine laboratory service at King Chulalongkorn Memorial Hospital in Bangkok, 241 samples harboured S. stercoralis, 153 hookworm and 2 Rhabditis hominis. The recovery rate of S. stercoralis by agar-plate culture is significantly superior to the other methods (P < 0.005). The ratios of positive results from the methods used to the total number of S. stercoralis-positive cases were as follows: 1:1.03 by agar-plate culture, 1:1.85 by the filter-paper method, 1:1.98 by the sedimentation technique and 1:10.48 by direct stool smear. A similar trend of the efficacy ratio of each method was obtained for hookworm detection. The characteristic furrows left by hookworm larvae, and larvae and adults of S. stercoralis could be used for preliminary species identification. Daily search for furrows on agar plates for up to 6 consecutive days resulted in an increased sensitivity for diagnosis of both S. stercoralis and hookworm infections.

  3. Use of bile-esculin agar for rapid differentiation of Enterobacteriaceae.

    PubMed

    Lindell, S S; Quinn, P

    1975-05-01

    Bile-esculin agar has been used for several years for the presumptive identification of group D streptococci. All members of the Enterobacteriaceae family will also grow on this medium, but only certain ones can hydrolyze esculin to 6,7-dihydroxycoumarin, which reacts with iron to produce a characteristic blackening of the medium. One thousand and six cultures from clinical specimens representing 20 genera were isolated and identified. Heavy inocula from fresh pure culture isolates on heart infusion agar were placed on bile-esculin agar slants and incubated at 35 C. The slants were examined at 4 h and again at 18 h for esculin hydrolysis. Shigella, Salmonella, Arizona, Proteus mirabilis, Proteus morganii, Providencia alcalifaciens, and Providencia stuartii all produced negative results. Klebsiella pneumoniae, Enterobacter aerogenes, Serratia marcescens, and Serratia rubidaea produced a positive reaction in 4 h. The other remaining eight genera exhibited varying results. The use of this medium in conjunction with triple sugar iron-lysine iron agar has been of great value in differentiating the Klebsiella-Enterobacter-Serratia group from other Enterobacteriaceae.

  4. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance sp...

  5. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung-Chul; Shin, Tae-Sung; Park, Bosoon; Lawrence, Kurt C.; Heitschmidt, Gerald W.

    2014-03-01

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance spectra measured in the visible and near-infrared spectral range from 400 and 1,000 nm (473 narrow spectral bands). Multivariate regression methods were used to estimate and predict hyperspectral data from RGB color values. The six representative non-O157 Shiga-toxin producing Eschetichia coli (STEC) serogroups (O26, O45, O103, O111, O121, and O145) were grown on Rainbow agar plates. A line-scan pushbroom hyperspectral image sensor was used to scan 36 agar plates grown with pure STEC colonies at each plate. The 36 hyperspectral images of the agar plates were divided in half to create training and test sets. The mean Rsquared value for hyperspectral image estimation was about 0.98 in the spectral range between 400 and 700 nm for linear, quadratic and cubic polynomial regression models and the detection accuracy of the hyperspectral image classification model with the principal component analysis and k-nearest neighbors for the test set was up to 92% (99% with the original hyperspectral images). Thus, the results of the study suggested that color-based detection may be viable as a multispectral imaging solution without much loss of prediction accuracy compared to hyperspectral imaging.

  6. Mercury in fruiting bodies of Fly Agaric Amanita muscaria (L.: Fr.) Pers. collected from Poland

    NASA Astrophysics Data System (ADS)

    Falandysz, J.; Lipka, K.

    2003-05-01

    Total mercury concentrations were determined in the fruiting bodies of Fly Agaric Amanita muscaria (L.: FL) Pers. and underlying soil substrate collected from several sites in Poland in 1993-2000 to evaluate mercury status as contaminant and bioindicating features of this species. The samples were collected from the spatially distant sites such as: Zaborski Landscape Park, Mierzeja Wiślana Landscape Park, Wdzydzki Landscape Park, Borecka Forest, Tucholskie Forest, Wieluńska Upland, the communities of Gubin, Manowo, Lubiana and Morag. Total mercury content of caps and stalks of Fly agaric varied widely depending on the sites examined. The range of the mean mercury concentrations for all 17 sites was between 96±10 and 1900±1400 ng/g dry wt for the caps and between 6l±32 and 920±760 ng/g dry wt for the stalks, while between 4.4±3.1 and 150±20 ng/g were noted for soil substrate samples from 9 sites examined. Fly agaric independently of the site examined showed relatively good capacity to accumulate total mercury and BCF values varied between 16±10 and 74±15 for the caps and between 11±8 and 42±10 for the stalks. Nevertheless, relatively high bioconcentration potential of mercury by Fly agaric seems to be specific for that species and under soil mercury concentrations noted no bioindication properties of this mushroom could be observed.

  7. Influence of different Mueller-Hinton agars and media age on Etest susceptibility testing of tigecycline.

    PubMed

    Tan, Thean Yen; Ng, Lily Siew Yong; Chen, Dorene Mei Mei

    2010-09-01

    This study investigated the effect of different Mueller-Hinton agars and media age on tigecycline MICs, obtained by Etest. Variations in MIC values on different Mueller-Hinton were noted, which may result in changes in categoric susceptibility. The use of stored Mueller-Hinton media had minimal effect on MIC values.

  8. Comparative study of agar diffusion test and the NCCLS macrobroth method for in vitro susceptibility testing of Candida spp.

    PubMed

    Soni, L M; Burattini, M N; Pignatari, A C; Gompertz, O F; Colombo, A L

    1999-01-01

    We performed a prospective double-blind study to evaluate the correlation between inhibition zones obtained by a disk-diffusion test, using Neo-sensitabs of fluconazole (Rosco Diagnostica), and the MICs generated by the NCCLS macrobroth dilution assay. Eighty clinical isolates, representing 5 of the clinically relevant species of Candida, were tested simultaneously by both methods. A clear inverse correlation was found between the results obtained by both tests (r = -0.69). In addition, there was high degree of agreement between methods in the identification of susceptible isolates. However, the resistance definition by disk-diffusion test had a positive predictive value of only 17%. Our data support the hypothesis that Rosco Fluconazole Neo-sensitabs have potential as a screening test for the identification of Candida isolates susceptible to fluconazole. Resistant isolates should be further investigated by standardized broth procedures.

  9. Serial dilution microchip for cytotoxicity test

    NASA Astrophysics Data System (ADS)

    Bang, Hyunwoo; Lim, Sun Hee; Lee, Young Kyung; Chung, Seok; Chung, Chanil; Han, Dong-Chul; Chang, Jun Keun

    2004-08-01

    Today's pharmaceutical industry is facing challenges resulting from the vast increases in sample numbers produced by high-throughput screening (HTS). In addition, the bottlenecks created by increased demand for cytotoxicity testing (required to assess compound safety) are becoming a serious problem. We have developed a polymer PDMS (polydimethylsiloxane) based microfluidic device that can perform a cytotoxicity test in a rapid and reproducible manner. The concept that the device includes is well adjustable to automated robots in huge HTS systems, so we can think of it as a potential dilution and delivery module. Cytotoxicity testing is all about the dilution and dispensing of a drug sample. Previously, we made a PDMS based microfluidic device which automatically and precisely diluted drugs with a buffer solution with serially increasing concentrations. This time, the serially diluted drug solution was directly delivered to 96 well plates for cytotoxicity testing. Cytotoxic paclitaxel solution with 2% RPMI 1640 has been used while carrying out cancerous cell based cytotoxicity tests. We believe that this rapid and robust use of the PDMS microchip will overcome the growing problem in cytotoxicity testing for HTS.

  10. Sulfuric Acid and Water: Paradoxes of Dilution

    ERIC Educational Resources Information Center

    Leenson, I. A.

    2004-01-01

    On equilibrium properties of aqueous solutions of sulfuric acid, Julius Thomsen has marked that the heat evolved on diluting liquid sulfuric acid with water is a continuous function of the water used, and excluded absolutely the acceptance of definite hydrates as existing in the solution. Information about thermochemical measurement, a discussion…

  11. Osmosis is not driven by water dilution.

    PubMed

    Kramer, Eric M; Myers, David R

    2013-04-01

    There is a misconception among plant scientists that osmosis is driven by the tendency of solutes to dilute water. In this opinion article, we discuss the quantitative and qualitative failures of this view, and go on to review the correct kinetic picture of osmosis as it appears in physics textbooks.

  12. Declining ecosystem health and the dilution effect

    PubMed Central

    Khalil, Hussein; Ecke, Frauke; Evander, Magnus; Magnusson, Magnus; Hörnfeldt, Birger

    2016-01-01

    The “dilution effect” implies that where species vary in susceptibility to infection by a pathogen, higher diversity often leads to lower infection prevalence in hosts. For directly transmitted pathogens, non-host species may “dilute” infection directly (1) and indirectly (2). Competitors and predators may (1) alter host behavior to reduce pathogen transmission or (2) reduce host density. In a well-studied system, we tested the dilution of the zoonotic Puumala hantavirus (PUUV) in bank voles (Myodes glareolus) by two competitors and a predator. Our study was based on long-term PUUV infection data (2003–2013) in northern Sweden. The field vole (Microtus agrestis) and the common shrew (Sorex araneus) are bank vole competitors and Tengmalm’s owl (Aegolius funereus) is a main predator of bank voles. Infection probability in bank voles decreased when common shrew density increased, suggesting that common shrews reduced PUUV transmission. Field voles suppressed bank vole density in meadows and clear-cuts and indirectly diluted PUUV infection. Further, Tengmalm’s owl decline in 1980–2013 may have contributed to higher PUUV infection rates in bank voles in 2003–2013 compared to 1979–1986. Our study provides further evidence for dilution effect and suggests that owls may have an important role in reducing disease risk. PMID:27499001

  13. Calculation of Geometric Dilution of Precision

    NASA Astrophysics Data System (ADS)

    Zhu, Jijie

    1992-07-01

    In this short communication, a very simple closed-form formula for the calculation of the Geometric Dilution of Precision (GDOP) in Global Positioning System (GPS) navigation and in Global Navigation Satellite System (GLONASS) navigation is presented, which requires less than 40 multiplications.

  14. Micro-agar salt bridge in patch-clamp electrode holder stabilizes electrode potentials

    PubMed Central

    Shao, Xuesi M.; Feldman, Jack L.

    2015-01-01

    Maintaining a stable electrode potential is critical for patch-clamp measurements. The electrode potential of conventional patch electrode-holder assembly, where an Ag/AgCl wire is in direct contact with the patch pipette filling solution, is subject to drift if the pipette solution contains a low concentration of chloride ions (Cl−). We developed an agar bridge of 3 M KCl filled in a polyimide microtubing which forms an electrical connection between an Ag/AgCl wire and the pipette solution. We examined the offset potentials of the micro-agar salt bridge electrode assembly in parallel with a conventional electrode assembly in generic recording conditions (the pipette solution contained 5 mM NaCl). The junction potential between the Ag/AgCl wire and the pipette filling solution in the conventional electrode contributed to most of the offset potential drift observed during the course of 30 min recordings. The drift was up to 27.3 mV after several changes of the glass pipette. In contrast, the micro-agar salt bridge stabilized the electrode potential within typically 2 mV without affecting the patch electrode resistance, capacitance or noise level. Numerical simulations showed that Cl− diffusion from the agar bridge to the tip caused a negligible 0.4 μM Cl− concentration change at the pipette tip within 30 min. This method is easy to implement and provides long-term recording stability. The micro-agar salt bridge can fit in most commercial patch electrode holders and can be conveniently maintained. PMID:16916545

  15. Oxalate Content of Different Drinkable Dilutions of Tea Infusions after Different Brewing Times

    PubMed Central

    Lotfi Yagin, Neda; Mahdavi, Reza; Nikniaz, Zeinab

    2012-01-01

    Background: The aims of this study were to determine the effect of different brewing times and diluting on oxalate content of loose-packed black teas consumed in Tabriz, Iran. Methods: The oxalate content of black teas after brewing for 5, 10, 15, 30, 60 minutes was measured in triplicate by enzymatic assay. In order to attain the most acceptable dilution of tea infusions, tea samples which were brewed for 15, 30 and 60 minutes were diluted two (120 ml), three (80 ml) and four (60 ml) times respectively. Results: There was a stepwise increase in oxalate concentrations associated with increased brewing times (P< 0.001) with oxalate contents ranging from 4.4 mg/240 ml for the 5 min to 6.3 mg/240 ml for 60 min brewing times, respectively. There were significant differences between the mean oxalate content of different dilutions after brewing for 15, 30 and 60 minutes (P< 0.001). Conclusion: The oxalate content of Iranian consumed black tea after different brewing times and different dilution was below the recommended levels. Therefore, it seems that consumption of black tea several times per day would not pose significant health risk in kidney stone patients and susceptible individuals. PMID:24688937

  16. Correlation between Agar Plate Screening and Solid-State Fermentation for the Prediction of Cellulase Production by Trichoderma Strains

    PubMed Central

    Florencio, Camila; Couri, Sonia; Farinas, Cristiane Sanchez

    2012-01-01

    The viability of converting biomass into biofuels and chemicals still requires further development towards the reduction of the enzyme production costs. Thus, there is a growing demand for the development of efficient procedures for selection of cellulase-producing microorganisms. This work correlates qualitative screening using agar plate assays with quantitative measurements of cellulase production during cultivation under solid-state fermentation (SSF). The initial screening step consisted of observation of the growth of 78 preselected strains of the genus Trichoderma on plates, using microcrystalline cellulose as carbon source. The 49 strains that were able to grow on this substrate were then subjected to a second screening step using the Congo red test. From this test it was possible to select 10 strains that presented the highest enzymatic indices (EI), with values ranging from 1.51 to 1.90. SSF cultivations using sugarcane bagasse and wheat bran as substrates were performed using selected strains. The CG 104NH strain presented the highest EGase activity (25.93 UI·g−1). The EI results obtained in the screening procedure using plates were compared with cellulase production under SSF. A correlation coefficient (R2) of 0.977 was obtained between the Congo red test and SSF, demonstrating that the two methodologies were in good agreement. PMID:23227312

  17. A simple deep monitoring well dilution technique.

    NASA Astrophysics Data System (ADS)

    Rogiers, Bart; Labat, Serge; Gedeon, Matej; Vandersteen, Katrijn

    2015-04-01

    Well dilution techniques are well known and studied as one of the basic techniques to quantify groundwater fluxes. A typical well dilution test consists of the injection of a tracer, a mixing mechanism (e.g. water circulation with a pump) to achieve a homogeneous concentration distribution within the well, and monitoring of the evolution of tracer concentration with time. An apparent specific discharge can be obtained from such a test, and when details on the well construction are known, it can be converted into a specific discharge representative of the undisturbed aquifer. For deep wells however, the injection of tracer becomes less practical and the use of pumps for circulating and mixing the water becomes problematic. This is due to the limited pressure that common pumps can endure at the outlet, as well as the large volume of water that makes it difficult to achieve a homogeneous concentration, and the impracticalities of getting a lot of equipment to large depths in very small monitoring wells. Injection and monitoring of tracer at a specific depth omits several of the problems with deep wells. We present a very simple device that can be used to perform a dilution test at a specific depth in deep wells. The injection device consists of a PVC tube with a detachable rubber seal at its bottom. To minimize disturbance of the water column in the well, we integrated an EC sensor in this injection device, which enables us to use demineralized water or dissolved salts as a tracer. Once at the target depth, the PVC tube is retracted and the EC sensor and tracer become subject to groundwater flow. The device was tested on a shallow well, on which different types of dilution tests were performed. The results of the other tests agree well with the injection tube results. Finally, the device was used to perform a dilution test in a deep well in order to demonstrate the feasibility of the approach.

  18. Thrombin Generation Capacity of Prothrombin Complex Concentrate in an In Vitro Dilutional Model

    PubMed Central

    Grottke, Oliver; Rossaint, Rolf; Henskens, Yvonne; van Oerle, Rene; ten Cate, Hugo; Spronk, Henri M. H.

    2013-01-01

    Background The use of PCC for the treatment of trauma-induced coagulopathy potentially increase the risk of thromboembolism and disseminated intravascular coagulation, which is addressed to an imbalance of both pro- and anticoagulants. As PCCs differ in composition, we used an in vitro dilutional approach to assess the overall thrombin generation of five different PCCs through various laboratory assays. Methods The vitamin K-dependent coagulation factors, heparin, and antithrombin were assessed in five commercially available PCCs. The procoagulant potential of the PCCs was assessed in plasma and whole blood from 4 healthy donors by means of classical coagulation assays, thrombin generation assay and thromboelastometry. In order to reflect coagulopathy, whole blood was diluted to 80, 60, 40, and 20% with Ringer’s lactate solution. Results The five different PCCs were characterised by comparable levels of factors II, VII, IX and X (all around 20–30 IU/mL), whereas the heparin (0 to 17.6 IU/mL) and antithrombin (0.06 to 1.29 IU/mL) levels were remarkably different between manufactures. In vitro dilution of blood induced a prolongation of the PT and aPTT, and attenuation of thrombin generation and ExTem induced thromboelastometry. Overall, non- or low-heparin containing PCCs restored the in vitro dilutional coagulopathy, whereas PCCs containing heparin have an anticoagulant effect. The thrombin generation assay showed to be the most sensitive method for assessment of PCC effects. Conclusions This study shows that most available PCCs are not balanced regarding their pro- and anticoagulants. The effect of measured differences in thrombin generation among different PCCs requires further investigations to elaborate the clinical meaning of this finding in the treatment of trauma induced coagulopathy. PMID:23696866

  19. Performance of chromID Clostridium difficile agar compared with BBL C. difficile selective agar for detection of C. difficile in stool specimens.

    PubMed

    Han, Sang Bong; Chang, Jiyoung; Shin, Sang Hyun; Park, Kang Gyun; Lee, Gun Dong; Park, Yong Gyu; Park, Yeon-Joon

    2014-09-01

    We evaluated the performance of a new chromogenic medium for detection of Clostridium difficile, chromID C. difficile agar (CDIF; bioMérieux, France), by comparison with BBL C. difficile Selective Agar (CDSA; Becton Dickinson and Company, USA). After heat pre-treatment (80℃, 5 min), 185 diarrheal stool samples were inoculated onto the two media types and incubated anaerobically for 24 hr and 48 hr for CDIF and for 48 hr and 72 hr for CDSA. All typical colonies on each medium were examined by Gram staining, and the gram-positive rods confirmed to contain the tpi gene by PCR were identified as C. difficile. C. difficile was recovered from 36 samples by using a combination of the two media. The sensitivity with CDIF 48 hr was highest (100%) and was significantly higher than that with CDIF 24 hr (58.3%; P<0.001), because samples with a low burden of C. difficile tended to require prolonged incubation up to 48 hr (P<0.001). The specificity of CDIF 24 hr and CDIF 48 hr (99.3% and 90.6%, respectively) was significantly higher than that of CDSA 48 hr and CDSA 72 hr (72.5% and 67.1%, respectively; P<0.001). CDIF was effective for detecting C. difficile in heat-pretreated stool specimens, thus reducing unnecessary testing for toxin production in non-C. difficile isolates and turnaround time.

  20. Effect of lignin on water vapor barrier, mechanical, and structural properties of agar/lignin composite films.

    PubMed

    Shankar, Shiv; Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2015-11-01

    Biodegradable composite films were prepared using two renewable resources based biopolymers, agar and lignin alkali. The lignin was used as a reinforcing material and agar as a biopolymer matrix. The effect of lignin concentration (1, 3, 5, and 10wt%) on the performance of the composite films was studied. In addition, the mechanical, water vapor barrier, UV light barrier properties, FE-SEM, and TGA of the films were analyzed. The agar/lignin films exhibited higher mechanical and UV barrier properties along with lower water vapor permeability compared to the neat agar film. The FTIR and SEM results showed the compatibility of lignin with agar polymer. The swelling ratio and moisture content of agar/lignin composite films were decreased with increase in lignin content. The thermostability and char content of agar/lignin composite films increased with increased lignin content. The results suggested that agar/lignin films have a potential to be used as a UV barrier food packaging material for maintaining food safety and extending the shelf-life of the packaged food.

  1. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus

    PubMed Central

    Laarhoven, Bob; Elissen, H. J. H.; Temmink, H.; Buisman, C. J. N.

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

  2. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus.

    PubMed

    Laarhoven, Bob; Elissen, H J H; Temmink, H; Buisman, C J N

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates.

  3. Serial dilutions: a new area of research for animal behavior.

    PubMed

    Nolf, Sondra L; Craig, David Philip Arthur; Abramson, Charles I

    2012-10-01

    This paper attempts to stimulate the psychological investigation of homeopathy and serially agitated dilutions. The history of homeopathy and serial dilutions is provided in a literature review of selected research areas. Two original illustrative experiments are also presented and discussed. The first examined the effect of serially agitated dilutions of Sevin on the mortality rate of honey bees (Apis mellifera). In a second experiment, the effect of serially agitated dilutions of sucrose on proboscis extension in honey bees was assessed. No differences were found between serially agitated dilutions of pesticides and sucrose compared with dilutions alone. Implications, limitations, and proposed further work are discussed.

  4. Diluting the burden of load: perceptual load effects are simply dilution effects.

    PubMed

    Tsal, Yehoshua; Benoni, Hanna

    2010-12-01

    The substantial distractor interference obtained for small displays when the target appears alone is reduced in large displays when the target is embedded among neutral letters. This finding has been interpreted as reflecting low-load and high-load processing, respectively, thereby supporting the theory of perceptual load (Lavie & Tsal, 1994). However, a possible alternative interpretation of this effect is that the distractor is similarly processed in both displays, yet its interference in the large ones is diluted by the presence of the neutral letters. We separated the effects of load and dilution by introducing dilution displays. They contained as many letters as the high-load displays but were clearly distinguished from the target, thus allowing for a low-load processing mode. Distractor interference obtained under both the low-load and high-load conditions disappeared under the dilution condition. Hence, the display size effect traditionally misattributed to perceptual load is fully accounted for by dilution. Furthermore, when dilution is controlled for, it is high load not low load producing greater interference.

  5. Comparison of cell wall polysaccharide hydrolysis by a dilute acid/enzymatic saccharification process and rumen microorganisms

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Evaluation of biomass crops for breeding or pricing purposes requires an assay that predicts performance of biomass in the bioenergy conversion process. Cell wall polysaccharide hydrolysis by dilute sulfuric acid pretreatment at 121 degrees C followed by cellulase hydrolysis for 72 h (CONV) and in v...

  6. A nanoliter microfluidic serial dilution bioreactor

    PubMed Central

    Gu, Guo-Yue; Lee, Yi-Wei; Chiang, Chih-Chung; Yang, Ya-Tang

    2015-01-01

    Bacterial culture is a basic technique in both fundamental and applied microbiology. The excessive reagent consumption and laborious maintenance of bulk bioreactors for microbial culture have prompted the development of miniaturized on-chip bioreactors. With the minimal choice of two compartments (N = 2) and discrete time, periodic dilution steps, we realize a microfluidic bioreactor that mimics macroscopic serial dilution transfer culture. This device supports automated, long-term microbial cultures with a nanoliter-scale working volume and real-time monitoring of microbial populations at single-cell resolution. Because of the high surface-to-volume ratio, the device also operates as an effective biofilm-flow reactor to support cogrowth of planktonic and biofilm populations. We expect that such devices will open opportunities in many fields of microbiology. PMID:26392828

  7. Kinetic model for dilute traffic flow

    NASA Astrophysics Data System (ADS)

    Balouchi, Ashkan; Browne, Dana A.

    The flow of traffic represents a many-particle non-equilibrium problem with important practical consequences. Traffic behavior has been studied using a variety of approaches, including fluid dynamics models, Boltzmann equation, and recently cellular automata (CA). The CA model for traffic flow that Nagel and Schreckenberg (NS) introduced can successfully mimic many of the known features of the traffic flow. We show that in the dilute limit of the NS model, where vehicles exhibit free flow, cars show significant nearest neighbor correlation primarily via a short-range repulsion. introduce an approximate analytic model to describe this dilute limit. We show that the distribution of the distance between consecutive vehicles obeys a drift-diffusion equation. We compared this model with direct simulations. The steady state solution and relaxation of this model agrees well with direct simulations. We explore how this model breaks down as the transition to jams occurs.

  8. Surface layering effect of diluted Intralipid

    NASA Astrophysics Data System (ADS)

    Foschum, F.; Bodenschatz, N.; Krauter, P.; Nothelfer, S.; Liemert, A.; Simon, E.; Kröner, S.; Kienle, A.

    2015-07-01

    In this study the formation of a surface layer on top of an Intralipid dilution was studied. By use of spatial frequency reflectance and spatially resolved reflectance the surface layer could be characterized. The influence on the determination of the optical properties assuming a semi-infinite medium in the theory was investigated. By use of an angularly resolved reflectance device the formation even on a horizontally orientated glass slide could be shown.

  9. Half-metallic diluted antiferromagnetic semiconductors.

    PubMed

    Akai, H; Ogura, M

    2006-07-14

    The possibility of half-metallic antiferromagnetism, a special case of ferrimagnetism with a compensated magnetization, in the diluted magnetic semiconductors is highlighted on the basis of the first-principles electronic structure calculation. As typical examples, the electrical and magnetic properties of II-VI compound semiconductors doped with 3d transition metal ion pairs--(V, Co) and (Fe, Cr)--are discussed.

  10. Dynamic scaling of dilute polymer solutions

    SciTech Connect

    Marqusee, J.A.; Deutch, J.M.

    1981-04-15

    Dynamic scaling relations are presented for the diffusion coefficient and intrinsic viscosity of dilute polymer solutions in D dimensions. The functional integration description of Adler and Freed is used with the correct D-dimensional hydrodynamic interaction and assumptions of power law dependence to obtain the scaling relations. Recursion relations for the exponents are determined in the asymptotic region of large N by an interdimensional scaling argument. 19 references.

  11. Crystallization of brushite from EDTA-chelated calcium in agar gels

    NASA Astrophysics Data System (ADS)

    Plovnick, Ross H.

    1991-10-01

    Brushite (dicalcium phosphate dihydrate, CaHPO 4·2H 2O, DCPD) has been crystallized from ethylenediaminetetraacetic acid (EDTA)-chelated calcium in agar gels at initial pH 4.5-6.4 and Ca/P molar ratio above about 0.8. White, spherular crystalline DCPD aggregates up to 1 mm in diameter grew in 8-10 weeks. Liesegang ring were occassionally observed at initial gel pH 5 and Ca/P molar ratio near 1. Crystals were characterized by X-ray diffraction analysis, scanning electron microscopy, and infrared absorption spectroscopy. Brushite crystals were also grown in agar gels with either unchelated Ca initially present in the gels and EDTA in overlying solutions, or EDTA initially present in the gels and unchelated Ca in overlying solutions. These crystals grew as 2-3 mm aggregates mainly within 1-3 cm of the gel-solution interface.

  12. [Physical properties of the agar of Gracilariopsis tenuifrons (Gracilariacea) from Sucre, Venezuela].

    PubMed

    Zecchinel, E; Brito, L; Lárez, G

    2000-12-01

    The yield, gel strength, gelling and melting temperatures of Gracilariopsis tenuifrons agar from Guayacán, Araya Peninsula, Sucre State, Venezuela were determined. Yield values with and without alkali treatment ranged from 23.22 to 39.57% and from 16.29 to 22.42% respectively, while gel strength with alkali treatment fluctuated betwen 699.31 and 1231.69 g/cm2 and without treatment varied from 278.0 to 691.06 g/cm2. Gelling and melting temperatures were in the range reported for other agarophytes. Considering gel strength, the agar quality of G. tenuifrons was higher than in other species and its exploitation in economically feasible.

  13. Modification of the Congo red agar method to detect biofilm production by Staphylococcus epidermidis.

    PubMed

    Kaiser, Thaís Dias Lemos; Pereira, Eliezer Menezes; Dos Santos, Kátia Regina Netto; Maciel, Ethel Leonor Noia; Schuenck, Ricardo Pinto; Nunes, Ana Paula Ferreira

    2013-03-01

    Staphylococcus epidermidis in immunocompromised patients can cause bacteremia related to the use of catheter due to biofilm production. There are different phenotypic methods to detect biofilm formation. One method is based on culture in brain heart infusion agar (BHIA) containing sucrose and red Congo dye (original Congo red agar). Our group created a new CRA formula and we have confirmed its capacity to detect biofilm production in 210 S. epidermidis strains, including 76 (36.2%) icaAB gene-positive strains. Other parameters were also evaluated. The new CRA formula that gave the best results was BHIA with sucrose (5%), Congo red (0.08%), NaCl (1.5%), glucose (2%), and vancomycin (0.5 mg/mL) (vancomycin-modified CRA-CRAmod). The CRAmod plus vancomycin may be a promising tool and can help to determine the real participation of S. epidermidis in the infectious process.

  14. Infiltration as Ventilation: Weather-Induced Dilution

    SciTech Connect

    Sherman, Max H.; Turner, William J.N.; Walker, Iain S.

    2011-06-01

    The purpose of outdoor air ventilation is to dilute or remove indoor contaminants to which occupants are exposed. It can be provided by mechanical or natural means. In most homes, especially older homes, weather-driven infiltration provides the dominant fraction of the total ventilation. As we seek to provide good indoor air quality at minimum energy cost, it is important to neither over-ventilate nor under-ventilate. Thus, it becomes critically important to evaluate correctly the contribution infiltration makes to the total outdoor air ventilation rate. Because weather-driven infiltration is dependent on building air leakage and weather-induced pressure differences, a given amount of air leakage will provide different amounts of infiltration. Varying rates of infiltration will provide different levels of contaminant dilution and hence effective ventilation. This paper derives these interactions and then calculates the impact of weather-driven infiltration for different climates. A new “N-factor” is introduced to provide a convenient method for calculating the ventilation contribution of infiltration for over 1,000 locations across North America. The results of this work could be used in indoor air quality standards (specifically ASHRAE 62.2) to account for the contribution of weather-driven infiltration towards the dilution of indoor pollutants.

  15. Dilution physics modeling: Dissolution/precipitation chemistry

    SciTech Connect

    Onishi, Y.; Reid, H.C.; Trent, D.S.

    1995-09-01

    This report documents progress made to date on integrating dilution/precipitation chemistry and new physical models into the TEMPEST thermal-hydraulics computer code. Implementation of dissolution/precipitation chemistry models is necessary for predicting nonhomogeneous, time-dependent, physical/chemical behavior of tank wastes with and without a variety of possible engineered remediation and mitigation activities. Such behavior includes chemical reactions, gas retention, solids resuspension, solids dissolution and generation, solids settling/rising, and convective motion of physical and chemical species. Thus this model development is important from the standpoint of predicting the consequences of various engineered activities, such as mitigation by dilution, retrieval, or pretreatment, that can affect safe operations. The integration of a dissolution/precipitation chemistry module allows the various phase species concentrations to enter into the physical calculations that affect the TEMPEST hydrodynamic flow calculations. The yield strength model of non-Newtonian sludge correlates yield to a power function of solids concentration. Likewise, shear stress is concentration-dependent, and the dissolution/precipitation chemistry calculations develop the species concentration evolution that produces fluid flow resistance changes. Dilution of waste with pure water, molar concentrations of sodium hydroxide, and other chemical streams can be analyzed for the reactive species changes and hydrodynamic flow characteristics.

  16. Growth dilution of metals in microalgal biofilms.

    PubMed

    Hill, Walter R; Larsen, Ingvar L

    2005-03-15

    Despite the key role microalgae play in introducing toxicants into aquatic food webs, little is known about the effects of environmental factors on metal accumulation by these primary producers. Environmental factors such as light and nutrients alter growth rates and may consequently influence metal concentrations in microalgae through growth dilution. Laboratory experiments suggested that metal uptake and elimination by microalgal biofilms were gradual enough to enable dilution of metals within the biofilms by photosynthetically accrued carbon, and a simple kinetic model of metal accumulation predicted significant variation in metal content due to growth dilution over the natural range of microalgal growth rates. The ratio of metal uptake to carbon uptake by microalgal biofilms decreased exponentially with increasing light in short-term laboratory experiments because photosynthesis was much more sensitive to a light gradient than was metal uptake. The effect of light on biofilm metal concentrations was confirmed in situ with a long-term experiment in which experimental shading of biofilms in a metal-contaminated stream decreased biofilm growth rates and caused a 3x increase in biofilm concentrations of twelve metals, including methylmercury. Slow growth at the primary producer level is a likely contributor to higher biotic metal concentrations in shaded, oligotrophic, or cold ecosystems.

  17. Enhancing Bioaerosol Sampling by Andersen Impactors Using Mineral-Oil-Spread Agar Plate

    PubMed Central

    Xu, Zhenqiang; Wei, Kai; Wu, Yan; Shen, Fangxia; Chen, Qi; Li, Mingzhen; Yao, Maosheng

    2013-01-01

    As a bioaerosol sampling standard, Andersen type impactor is widely used since its invention in 1950s, including the investigation of the anthrax attacks in the United States in 2001. However, its related problems such as impaction and desiccation stress as well as particle bounce have not been solved. Here, we improved its biological collection efficiencies by plating a mineral oil layer (100 µL) onto the agar plate. An Andersen six-stage sampler and a BioStage impactor were tested with mineral-oil-spread agar plates in collecting indoor and outdoor bacterial and fungal aerosols. The effects of sampling times (5, 10 and 20 min) were also studied using the BioStage impactor when sampling environmental bioaerosols as well as aerosolized Bacillus subtilis (G+) and Escherichia coli (G-). In addition, particle bounce reduction by mineral-oil-plate was also investigated using an optical particle counter (OPC). Experimental results revealed that use of mineral-oil-spread agar plate can substantially enhance culturable bioaerosol recoveries by Andersen type impactors (p-values<0.05). The recovery enhancement was shown to depend on bioaerosol size, type, sampling time and environment. In general, more enhancements (extra 20%) were observed for last stage of the Andersen six-stage samplers compared to the BioStage impactor for 10 min sampling. When sampling aerosolized B. subtilis, E. coli and environmental aerosols, the enhancement was shown to increase with increasing sampling time, ranging from 50% increase at 5 min to ∼100% at 20 min. OPC results indicated that use of mineral oil can effectively reduce the particle bounce with an average of 66% for 10 min sampling. Our work suggests that enhancements for fungal aerosols were primarily attributed to the reduced impaction stress, while for bacterial aerosols reduced impaction, desiccation and particle bounce played major roles. The developed technology can readily enhance the agar-based techniques including those high

  18. Rapid Isolation and Susceptibility Testing of Leptospira spp. Using a New Solid Medium, LVW Agar

    PubMed Central

    Wuthiekanun, Vanaporn; Amornchai, Premjit; Paris, Daniel H.; Langla, Sayan; Thaipadunpanit, Janjira; Chierakul, Wirongrong; Smythe, Lee D.; White, Nicholas J.; Day, Nicholas P. J.; Peacock, Sharon J.

    2013-01-01

    Pathogenic Leptospira spp., the causative agents of leptospirosis, are slow-growing Gram-negative spirochetes. Isolation of Leptospira from clinical samples and testing of antimicrobial susceptibility are difficult and time-consuming. Here, we describe the development of a new solid medium that facilitates more-rapid growth of Leptospira spp. and the use of this medium to evaluate the Etest's performance in determining antimicrobial MICs to drugs in common use for leptospirosis. The medium was developed by evaluating the effects of numerous factors on the growth rate of Leptospira interrogans strain NR-20157. These included the type of base agar, the concentration of rabbit serum (RS), and the concentration and duration of CO2 incubation during the initial period of culture. The highest growth rate of NR-20157 was achieved using a Noble agar base supplemented with 10% RS (named LVW agar), with an initial incubation at 30°C in 5% CO2 for 2 days prior to continuous culture in air at 30°C. These conditions were used to develop the Etest for three species, L. interrogans (NR-20161), L. kirschnerii (NR-20327), and L. borgpetersenii (NR-20151). The MICs were read on day 7 for all samples. The Etest was then performed on 109 isolates of pathogenic Leptospira spp. The MIC90 values for penicillin G, doxycycline, cefotaxime, ceftriaxone, and chloramphenicol were 0.64 units/ml and 0.19, 0.047, 0.5, and 2 μg/ml, respectively. The use of LVW agar, which enables rapid growth, isolation of single colonies, and simple antimicrobial susceptibility testing for Leptospira spp., provides an opportunity for new areas of fundamental and applied research. PMID:23114772

  19. Draft genome of agar-degrading marine bacterium Gilvimarinus agarilyticus JEA5.

    PubMed

    Lee, Youngdeuk; Lee, Su-Jin; Park, Gun-Hoo; Heo, Soo-Jin; Umasuthan, Navaneethaiyer; Kang, Do-Hyung; Oh, Chulhong

    2015-06-01

    Gilvimarinus agarilyticus JEA5, which effectively degrades agar, was isolated from the seawater of Jeju Island, Republic of Korea. Here, we report the draft genome sequence of G. agarilyticus JEA5 with a total genome size of 4,179,438bp from 2 scaffolds (21 contigs) with 53.15% G+C content. Various polysaccharidases including 11 predicted agarases were observed from the draft genome of G. agarilyticus JEA5.

  20. Enhancing bioaerosol sampling by Andersen impactors using mineral-oil-spread agar plate.

    PubMed

    Xu, Zhenqiang; Wei, Kai; Wu, Yan; Shen, Fangxia; Chen, Qi; Li, Mingzhen; Yao, Maosheng

    2013-01-01

    As a bioaerosol sampling standard, Andersen type impactor is widely used since its invention in 1950s, including the investigation of the anthrax attacks in the United States in 2001. However, its related problems such as impaction and desiccation stress as well as particle bounce have not been solved. Here, we improved its biological collection efficiencies by plating a mineral oil layer (100 µL) onto the agar plate. An Andersen six-stage sampler and a BioStage impactor were tested with mineral-oil-spread agar plates in collecting indoor and outdoor bacterial and fungal aerosols. The effects of sampling times (5, 10 and 20 min) were also studied using the BioStage impactor when sampling environmental bioaerosols as well as aerosolized Bacillus subtilis (G+) and Escherichia coli (G-). In addition, particle bounce reduction by mineral-oil-plate was also investigated using an optical particle counter (OPC). Experimental results revealed that use of mineral-oil-spread agar plate can substantially enhance culturable bioaerosol recoveries by Andersen type impactors (p-values<0.05). The recovery enhancement was shown to depend on bioaerosol size, type, sampling time and environment. In general, more enhancements (extra 20%) were observed for last stage of the Andersen six-stage samplers compared to the BioStage impactor for 10 min sampling. When sampling aerosolized B. subtilis, E. coli and environmental aerosols, the enhancement was shown to increase with increasing sampling time, ranging from 50% increase at 5 min to ∼100% at 20 min. OPC results indicated that use of mineral oil can effectively reduce the particle bounce with an average of 66% for 10 min sampling. Our work suggests that enhancements for fungal aerosols were primarily attributed to the reduced impaction stress, while for bacterial aerosols reduced impaction, desiccation and particle bounce played major roles. The developed technology can readily enhance the agar-based techniques including those high

  1. How do microorganisms influence trace element uptake by plants? Screening in an agar model rhizosphere.

    NASA Astrophysics Data System (ADS)

    Marchetti, M.; Robinson, B. H.; Evangelou, M. W. H.; Vachey, A.; Schwitzguebel, J. P.; Bernier-Latmani, R.; Schulin, R.

    2009-04-01

    Trace elements (TE) are essential for humans and plants, but they may be toxic if their concentration is too high. For this reason, the management of TE in soils is very important. In some cases it may be necessary to increase the uptake of nutrients or TE by plants, for example in a biofortification perspective. Conversely, in some other cases TE uptake by plants should be decreased, for instance to avoid heavy metals entering the food chain via edible crops. Microorganisms living in the rhizosphere affect trace element (TE) uptake by plants. However, due to the complexity of this space and the variety of microorganisms that occur there, it is difficult to isolate the effect of any particular strain. To overcome this hurdle, we developed a system in which we grew plants under sterile conditions in agar and inoculated their rhizosphere with a single, well-defined microbial strain. For many years, agar has been used as a growth substrate for microorganisms and plant tissues. It is cheap, easy to use, and can be autoclaved to ensure its sterility. Because of its widespread use, an experiment conducted using this substrate can be reproduced under the same conditions in any laboratory. In contrast to soil, there is little interaction between the trace elements and the agar matrix. There are many studies investigating the influence of microorganisms on TE uptake by plants. However, so far only a small variety of microorganisms has been tested on few plant species. Therefore, the first objective of our research was to develop a method to rapidly screen a large variety of microorganisms on various plant species. Once this goal was achieved, we sought to study the effect of single, well-defined microbial strains on TE uptake by sunflower and wheat. The substrate for plants growth was a 10% agar solution prepared with modified Hoagland's solution and a TE solution containing 1 mg/kg Pb and molar equivalents of Cu, Ni and Zn. The agar solution was autoclaved and poured into

  2. Ultrasound induced bubble clusters and tunnels in tissue-mimicking agar phantoms

    NASA Astrophysics Data System (ADS)

    Movahed, Pooya; Kreider, Wayne; Maxwell, Adam D.; Bailey, Michael R.; Freund, Jonathan B.

    2016-11-01

    Soft tissue fractionation induced by acoustic cavitation is desired for non-invasive tissue removal in histotripsy, while being a potential injury mechanism in other therapeutic ultrasound treatments such as lithotripsy. In this work, we investigate the formation of bubble clusters and tunnels in tissue-mimicking agar phantoms by focused ultrasound bursts to inform a class of damage models. Agar phantoms of different stiffness were subjected to a series of multi-cycle ultrasound bursts, using a burst wave lithotripsy (BWL) protocol, and simultaneously imaged at 200 frames per second (1 image per ultrasound burst). Some bubbles become visible in images ( 200 microns) due to the negative pressure ( 7.5 MPa) in the initial bursts, and the number of visible bubbles increases continuously during the subsequent bursts. A Rayleigh-Plesset-type bubble dynamics model, which accounts for viscoelastic confinement of agar gels, is developed. Material fatigue leading to eventual irreversible fracture-like failure in this model is proposed to explain the key observations. In addition to isolated, approximately spherical bubbles, long tunnel-like features are observed, which are seemingly lines of joined bubbles along a possible fracture or defect. The geometry of these tunnel-like features is quantified, and a physical explanation for tunnel formation is proposed in terms of bubble expansion and unstable collapse. This work was supported by NIH NIDDK Grant P01-DK043881.

  3. Pig and Goat Blood as Substitutes for Sheep Blood in Blood-Supplemented Agar Media

    PubMed Central

    Anand, Chandar; Gordon, Rhonda; Shaw, Helene; Fonseca, Kevin; Olsen, Merle

    2000-01-01

    In many developing countries sheep and horse blood, the recommended blood supplements in bacteriological media, are not readily available, whereas pig and goat blood are. Therefore, this study examined the use of pig and goat blood as potential substitutes for sheep blood in blood-supplemented bacteriologic media commonly used in clinical microbiology laboratories. In general, the growth characteristics and colony morphologies of a wide range of aerobic and anaerobic bacteria and Candida albicans were similar on media containing pig, goat, and sheep blood, although differences were found. Enterococcus sp. uniformly produced alpha-hemolysis when incubated in CO2, but in anaerobic conditions the hemolysis varied. In contrast, beta-hemolytic streptococci produced identical hemolytic reactions on all three media. Synergistic hemolysis was not observed on pig blood agar in the CAMP test nor on goat blood agar in the reverse CAMP test. The preparation of chocolate agar (heated) with pig blood required heating to a higher temperature than with sheep or goat blood to yield suitable growth of Haemophilus species. In general, we conclude that pig and goat blood are suitable alternatives to sheep blood for use in bacteriological media in settings where sheep and horse blood are not readily available. PMID:10655351

  4. Predicting the growth situation of Pseudomonas aeruginosa on agar plates and meat stuffs using gas sensors

    NASA Astrophysics Data System (ADS)

    Gu, Xinzhe; Sun, Ye; Tu, Kang; Dong, Qingli; Pan, Leiqing

    2016-12-01

    A rapid method of predicting the growing situation of Pseudomonas aeruginosa is presented. Gas sensors were used to acquire volatile compounds generated by P. aeruginosa on agar plates and meat stuffs. Then, optimal sensors were selected to simulate P. aeruginosa growth using modified Logistic and Gompertz equations by odor changes. The results showed that the responses of S8 or S10 yielded high coefficients of determination (R2) of 0.89–0.99 and low root mean square errors (RMSE) of 0.06–0.17 for P. aeruginosa growth, fitting the models on the agar plate. The responses of S9, S4 and the first principal component of 10 sensors fit well with the growth of P. aeruginosa inoculated in meat stored at 4 °C and 20 °C, with R2 of 0.73–0.96 and RMSE of 0.25–1.38. The correlation coefficients between the fitting models, as measured by electronic nose responses, and the colony counts of P. aeruginosa were high, ranging from 0.882 to 0.996 for both plate and meat samples. Also, gas chromatography–mass spectrometry results indicated the presence of specific volatiles of P. aeruginosa on agar plates. This work demonstrated an acceptable feasibility of using gas sensors—a rapid, easy and nondestructive method for predicting P. aeruginosa growth.

  5. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus

    PubMed Central

    Cold, Emma R.; Freyria, Nastasia J.; Martínez Martínez, Joaquín; Fernández Robledo, José A.

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham’s F12–5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham’s F12–5% FBS– 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham’s F12–5% FBS– 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications. PMID:27149378

  6. The use of agar as a novel filler for monolithic matrices produced using hot melt extrusion.

    PubMed

    Lyons, John G; Devine, Declan M; Kennedy, James E; Geever, Luke M; O'Sullivan, Patrick; Higginbotham, Clement L

    2006-08-01

    The use of filler materials in an extended release monolithic polymer matrix can lead to a vastly altered release profile for the active pharmaceutical ingredient. A range of excipients for use in monolithic matrices have been discussed in the literature. The body of work described in this research paper outlines the use of agar as a novel filler material in a hot melt extruded polymer matrix. Several batches of matrix material were prepared with Diclofenac sodium used as the active pharmaceutical ingredient (API). Agar and microcrystalline cellulose were used as the filler materials in varying ratios, to examine the effect of % filler content as well as filler type on the properties of the hot melt extruded matrix. The resultant extrudates were characterised using steady state parallel plate rheometry, differential scanning calorimetry (DSC) and dissolution testing. The rheometry analysis concluded that the fillers used resulted in an increase in the matrix viscosity. The DSC scans obtained showed negligible effects on the melting behavior of the matrix as a result of the filler inclusion. Dissolution analysis showed that the presence of the fillers resulted in a slower release rate of API than for the matrix alone. The results detailed within this paper indicate that agar is a viable filler for extended release hot melt produced dosage forms.

  7. Pig and goat blood as substitutes for sheep blood in blood-supplemented agar media.

    PubMed

    Anand, C; Gordon, R; Shaw, H; Fonseca, K; Olsen, M

    2000-02-01

    In many developing countries sheep and horse blood, the recommended blood supplements in bacteriological media, are not readily available, whereas pig and goat blood are. Therefore, this study examined the use of pig and goat blood as potential substitutes for sheep blood in blood-supplemented bacteriologic media commonly used in clinical microbiology laboratories. In general, the growth characteristics and colony morphologies of a wide range of aerobic and anaerobic bacteria and Candida albicans were similar on media containing pig, goat, and sheep blood, although differences were found. Enterococcus sp. uniformly produced alpha-hemolysis when incubated in CO(2), but in anaerobic conditions the hemolysis varied. In contrast, beta-hemolytic streptococci produced identical hemolytic reactions on all three media. Synergistic hemolysis was not observed on pig blood agar in the CAMP test nor on goat blood agar in the reverse CAMP test. The preparation of chocolate agar (heated) with pig blood required heating to a higher temperature than with sheep or goat blood to yield suitable growth of Haemophilus species. In general, we conclude that pig and goat blood are suitable alternatives to sheep blood for use in bacteriological media in settings where sheep and horse blood are not readily available.

  8. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus.

    PubMed

    Cold, Emma R; Freyria, Nastasia J; Martínez Martínez, Joaquín; Fernández Robledo, José A

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham's F12-5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham's F12-5% FBS- 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham's F12-5% FBS- 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications.

  9. Isolation and characterization of agar-degrading endophytic bacteria from plants.

    PubMed

    Song, Tao; Zhang, Weijia; Wei, Congchong; Jiang, Tengfei; Xu, Hui; Cao, Yi; Cao, Yu; Qiao, Dairong

    2015-02-01

    Agar is a polysaccharide extracted from the cell walls of some macro-algaes. Among the reported agarases, most of them come from marine environment. In order to better understand different sources of agarases, it is important to search new non-marine native ones. In this study, seven agar-degrading bacteria were first isolated from the tissues of plants, belonging to three genera, i.e., Paenibacillus sp., Pseudomonas sp., and Klebsiella sp. Among them, the genus Klebsiella was first reported to have agarolytic ability and the genus Pseudomonas was first isolated from non-marine environment with agarase activity. Besides, seven strains were characterized by investigating the growth and agarase production in the presence of various polysaccharides. The results showed that they could grow on several polysaccharides such as araban, carrageenan, chitin, starch, and xylan. Besides, they could also produce agarase in the presence of different polysaccharides other than agar. Extracellular agarases from seven strains were further analyzed by SDS-PAGE combined with activity staining and estimated to be 75 kDa which has great difference from most reported agarases.

  10. Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion-reaction based continuum model

    NASA Astrophysics Data System (ADS)

    Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

    2016-08-01

    Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion-reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm’s shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here.

  11. Predicting the growth situation of Pseudomonas aeruginosa on agar plates and meat stuffs using gas sensors

    PubMed Central

    Gu, Xinzhe; Sun, Ye; Tu, Kang; Dong, Qingli; Pan, Leiqing

    2016-01-01

    A rapid method of predicting the growing situation of Pseudomonas aeruginosa is presented. Gas sensors were used to acquire volatile compounds generated by P. aeruginosa on agar plates and meat stuffs. Then, optimal sensors were selected to simulate P. aeruginosa growth using modified Logistic and Gompertz equations by odor changes. The results showed that the responses of S8 or S10 yielded high coefficients of determination (R2) of 0.89–0.99 and low root mean square errors (RMSE) of 0.06–0.17 for P. aeruginosa growth, fitting the models on the agar plate. The responses of S9, S4 and the first principal component of 10 sensors fit well with the growth of P. aeruginosa inoculated in meat stored at 4 °C and 20 °C, with R2 of 0.73–0.96 and RMSE of 0.25–1.38. The correlation coefficients between the fitting models, as measured by electronic nose responses, and the colony counts of P. aeruginosa were high, ranging from 0.882 to 0.996 for both plate and meat samples. Also, gas chromatography–mass spectrometry results indicated the presence of specific volatiles of P. aeruginosa on agar plates. This work demonstrated an acceptable feasibility of using gas sensors—a rapid, easy and nondestructive method for predicting P. aeruginosa growth. PMID:27941841

  12. Dilution of Wastewater Discharges from Moving Cruise Ships

    DTIC Science & Technology

    2003-09-01

    et al. estimate that effluent discharged at a rate of 200 meters3 second-1 from a cruise ship traveling at between 6 and 10 knots would be diluted...that would elapse before this level of dilution was achieved. The Alaska Cruise Ship Initiative Science Panel has also made estimates of the dilution...field. To quantify dilution, we spiked wastewater tanks with rhodamine dye. The crew of the cruise ship then emptied the tanks while the vessel was

  13. Comparative evaluation of chromogenic agar medium and conventional culture system for isolation and presumptive identification of uropathogens

    PubMed Central

    Akter, Laila; Haque, Rezwana; Salam, Md. Abdus

    2014-01-01

    Objective: Urine is the most frequent specimen received for culture/sensitivity by clinical laboratories. The microbiological performance of HiCrome UTI agar medium was compared with Blood agar and MacConkey agar for isolation and presumptive identification of bacteria from urine culture. Methods: A total of 443 consecutively collected midstream and/or catheter-catch urine samples from patients attending the Islami Bank Medical College Hospital, Rajshahi, Bangladesh during January to December, 2012 were cultured. Urine samples showing pus cells ≥ 5/HPF were inoculated on to Blood agar (BA), MacConkey agar (MAC) and HiCrome UTI agar (CA) media simultaneously and incubated overnight aerobically at 370C. Rate of isolation and presumptive identification of bacterial species were compared for different media. Results: Culture yielded a total of 199 bacterial isolates from 189 (42.67%) positive plates including 179 (40.40%) unimicrobial and 10 (2.26%) polymicrobial (mixed growth of pair of bacteria) growths. Both HiCrome UTI agar and Blood agar media supported 100% growths while 151 (75.88%) growths were observed on MacConkey agar. The rate of presumptive identification was found significantly higher on HiCrome UTI agar (97.49%) than MAC agar (67.34%) (P<0.001) as primary urine culture medium. Of 199 isolates, E. coli was found to be the leading uropathogen isolated from 118 (59.30%) samples with its presumptive identification rate of 95.76%, 93.22% and 5.93% on CA, MAC and BA respectively. All 10 (100%) polymicrobial growths were demonstrated distinctly on CA against only 01(10%) on each BA and MAC. Conclusion: HiCrome UTI agar was found to be more useful as primary urine culture medium in both higher rate of isolation and presumptive identification of uropathogens in comparison to conventional media. Its inherent characteristics in demonstrating polymicrobial growth and ease of rapid identification by distinct colony colour are unique. PMID:25225521

  14. Effective viscosity of dilute bacterial suspensions

    NASA Astrophysics Data System (ADS)

    Haines, Brian M.

    This dissertation explores the bulk (volume averaged) properties of suspensions of microswimmers in a fluid. A microswimmer is a microscopic object that propels itself through a fluid. A common example of a microswimmer is a bacterium, such as Bacillus subtilis. Our particular interest is the bulk rheological properties of suspensions of bacteria -- that is, studying how such a suspension deforms under the application of an external force. In the simplest case, the rheology of a fluid can be described by a scalar effective viscosity. The goal of this dissertation is to find explicit formulae for the effective viscosity in terms of known geometric and physical parameters characterizing bacteria and use them to explain experimental observations. Throughout the dissertation, we consider bacterial suspensions in the dilute limit, where bacteria are assumed to be so far apart that interactions between them are negligible. This simplifies calculations significantly and is the regime in which the most striking experimental results have been observed. We first study suspensions of self-propelled particles using a two-dimensional (2D) Partial Differential Equation (PDE) model. A bacterium is modeled as a disk in 2D with self-propulsion provided by a point force in the fluid. A formula is obtained for the effective viscosity of such suspensions in the dilute limit. This formula includes the two terms that are found in the 2D version of Einstein's classical result for a passive suspension of spheres. To this, our main contribution is added, an additional term due to self-propulsion which depends on the physical and geometric properties of the suspension. This work demonstrates how bacterial self-propulsion can alter the viscosity of a fluid and highlights the importance of bacterial orientation. Next, we present a more realistic PDE model for dilute suspensions of swimming bacteria in a three-dimensional fluid. In this work, a bacterium is modeled as a prolate spheroid with

  15. Percolation quantum phase transitions in diluted magnets.

    PubMed

    Vojta, Thomas; Schmalian, Jörg

    2005-12-02

    We show that the interplay of geometric criticality and quantum fluctuations leads to a novel universality class for the percolation quantum phase transition in diluted magnets. All critical exponents involving dynamical correlations are different from the classical percolation values, but in two dimensions they can nonetheless be determined exactly. We develop a complete scaling theory of this transition, and we relate it to recent experiments in La2Cu(1-p)(Zn,Mg)(p)O4. Our results are also relevant for disordered interacting boson systems.

  16. Dilution jet mixing program, phase 3

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Coleman, E.; Myers, G.; White, C.

    1985-01-01

    The main objectives for the NASA Jet Mixing Phase 3 program were: extension of the data base on the mixing of single sided rows of jets in a confined cross flow to discrete slots, including streamlined, bluff, and angled injections; quantification of the effects of geometrical and flow parameters on penetration and mixing of multiple rows of jets into a confined flow; investigation of in-line, staggered, and dissimilar hole configurations; and development of empirical correlations for predicting temperature distributions for discrete slots and multiple rows of dilution holes.

  17. Steadiness in Dilute Pyroclastic Density Currents

    NASA Astrophysics Data System (ADS)

    Andrews, B. J.

    2015-12-01

    Pyroclastic density currents (PDCs) are often unsteady, as evidenced by direct observations of dilute lobes or jets emerging from the fronts of larger currents and by deposits that indicate transient transport and depositional regimes. We used scaled experiments to investigate unsteadiness in dilute PDCs. The experimental currents were run in an 8.5x6.1x2.6 m tank and comprised heated or ambient temperature 20-μm talc powder turbulently suspended in air. Experiments were scaled such that densimetric and thermal Richardson numbers, Froude number, and particle Stokes and settling numbers were dynamically similar to natural dilute PDCs. Although the experiment Reynolds numbers are substantially lower than those of natural PDCs, the experiments are fully turbulent. Experiments were observed with video and high-speed cameras and high-frequency thermocouples. Currents were generated with total eruption durations of 100 s. Unsteadiness in source conditions was produced by interrupting supply for intervals, t, with durations of 1, 2.5, 5, and 10 s in the experimental runs at 35 and 70 s. When t<2.5 s, the currents are indistinguishable from currents with steady supply. In runs with t=2.5-5 s, the individual pulses comprising each current are readily apparent near the source, but decay with distance downstream until the currents appear as single (e.g. steady) flows. In experiments with t=10 s, the 3 pulses comprising each run never merge and the currents remain unsteady. Comparison with the integral turbulent timescale, τ, and current velocity, U, show that unsteadiness is persistent when t>3<τ but currents are steady when t<τ. In currents with 3τ>t>τ, unsteadiness decays such that at a distance of ~4Ut, the currents are again steady. Applied to natural dilute PDCs, our results suggest that currents and their resulting deposits, will only show evidence of unsteadiness if they are disrupted for many seconds and those breaks may "heal" over distances of 100s of meters.

  18. Low shear viscosity of dilute polymer solutions

    SciTech Connect

    Chiou, C.S.; Gordon, R.J.

    1980-09-01

    A modification of a viscometer originally proposed by Zimm and Crothers is studied, which may be used to measure ultra low shear viscosity for highly dilute polymer solutions. This may provide useful information on polymer coil dimensions and relaxation time. Use of the low shear viscosity data leads to large value of relaxation time induced by polymer addition to a concentration of only 2 to 3 ppM by wt. This finding is consistent with the marked viscoelastic effects exhibited by these solutions.

  19. Comparison of performance of the novel chromogenic spectra VRE agar to that of bile esculin azide and Campylobacter agars for detection of vancomycin-resistant enterococci in fecal samples.

    PubMed

    Jenkins, S G; Raskoshina, L; Schuetz, A N

    2011-11-01

    A total of 142 stool specimens were evaluated for vancomycin-resistant enterococcus (VRE). Twenty-four-hour sensitivities and specificities, respectively, were 98% and 95% for Spectra VRE chromogenic agar (Remel, Lenexa, KS), 86% and 92% for bile esculin azide with vancomycin (BEAV; Remel), and 96.5% and 92% for Campylobacter agar (CAMPY; Remel). Spectra VRE and CAMPY are significantly more sensitive at 24 h than BEAV.

  20. Modeling error in experimental assays using the bootstrap principle: understanding discrepancies between assays using different dispensing technologies

    NASA Astrophysics Data System (ADS)

    Hanson, Sonya M.; Ekins, Sean; Chodera, John D.

    2015-12-01

    All experimental assay data contains error, but the magnitude, type, and primary origin of this error is often not obvious. Here, we describe a simple set of assay modeling techniques based on the bootstrap principle that allow sources of error and bias to be simulated and propagated into assay results. We demonstrate how deceptively simple operations—such as the creation of a dilution series with a robotic liquid handler—can significantly amplify imprecision and even contribute substantially to bias. To illustrate these techniques, we review an example of how the choice of dispensing technology can impact assay measurements, and show how large contributions to discrepancies between assays can be easily understood and potentially corrected for. These simple modeling techniques—illustrated with an accompanying IPython notebook—can allow modelers to understand the expected error and bias in experimental datasets, and even help experimentalists design assays to more effectively reach accuracy and imprecision goals.

  1. Modeling error in experimental assays using the bootstrap principle: understanding discrepancies between assays using different dispensing technologies.

    PubMed

    Hanson, Sonya M; Ekins, Sean; Chodera, John D

    2015-12-01

    All experimental assay data contains error, but the magnitude, type, and primary origin of this error is often not obvious. Here, we describe a simple set of assay modeling techniques based on the bootstrap principle that allow sources of error and bias to be simulated and propagated into assay results. We demonstrate how deceptively simple operations--such as the creation of a dilution series with a robotic liquid handler--can significantly amplify imprecision and even contribute substantially to bias. To illustrate these techniques, we review an example of how the choice of dispensing technology can impact assay measurements, and show how large contributions to discrepancies between assays can be easily understood and potentially corrected for. These simple modeling techniques--illustrated with an accompanying IPython notebook--can allow modelers to understand the expected error and bias in experimental datasets, and even help experimentalists design assays to more effectively reach accuracy and imprecision goals.

  2. Modeling error in experimental assays using the bootstrap principle: Understanding discrepancies between assays using different dispensing technologies

    PubMed Central

    Hanson, Sonya M.; Ekins, Sean; Chodera, John D.

    2015-01-01

    All experimental assay data contains error, but the magnitude, type, and primary origin of this error is often not obvious. Here, we describe a simple set of assay modeling techniques based on the bootstrap principle that allow sources of error and bias to be simulated and propagated into assay results. We demonstrate how deceptively simple operations—such as the creation of a dilution series with a robotic liquid handler—can significantly amplify imprecision and even contribute substantially to bias. To illustrate these techniques, we review an example of how the choice of dispensing technology can impact assay measurements, and show how large contributions to discrepancies between assays can be easily understood and potentially corrected for. These simple modeling techniques—illustrated with an accompanying IPython notebook—can allow modelers to understand the expected error and bias in experimental datasets, and even help experimentalists design assays to more effectively reach accuracy and imprecision goals. PMID:26678597

  3. The Effect of Dilution on the Structure of Microbial Communities

    NASA Technical Reports Server (NTRS)

    Mills, Aaron L.

    2000-01-01

    To determine how dilution of microbial communities affects the diversity of the diluted assemblage a series of numerical simulations were conducted that determined the theoretical change in diversity, richness, and evenness of the community with serial dilution. The results of the simulation suggested that the effects are non linear with a high degree of dependence on the initial evenness of the community being diluted. A series of incubation experiments using a range of dilutions of raw sewage as an inoculum into sterile sewage was used for comparison to the simulations. The diluted communities were maintained in batch fed reactors (three day retention time) for nine days. The communities were harvested and examined by conventional plating and by molecular analysis of the whole-community DNA using AFLP and T-RFLP. Additional, CLPP analysis was also applied. The effects on richness predicted by the numerical simulations were confirmed by the analyses used. The diluted communities fell into three groups, a low dilution, intermediate dilution, and high dilution group, which corresponded well with the groupings obtained for community richness in simulation. The grouping demonstrated the non-linear nature of dilution of whole communities. Furthermore, the results implied that the undiluted community consisted of a few dominant types accompanied by a number of rare (low abundance) types as is typical in unevenly distributed communities.

  4. Studies on accuracy of trichothecene multitoxin analysis using stable isotope dilution assays.

    PubMed

    Asam, S; Rychlik, M

    2007-12-01

    Critical parameters in mycotoxin analysis were examined by using stable isotope-labelled tricho-thecenes. Sample weight was downsized to 1 g without loosing precision when sufficiently homogenized samples were taken for analysis. Complete extraction of trichothecenes could be achieved with a solvent mixture of acetonitrile+water (84+16; v+v) even without the use of stable isotope labelled standards. However, in particular for the analysis of deoxynivalenol the absolute amount of water in the solvent volume used for extraction appeared critical. Depending on the matrix a low water amount resulted in too low quantitative values when no stable isotope-labelled standards are applied to correct for incomplete extraction. In this case the used extraction volume had to be at least 10 ml for 1 g sample when acetonitrile + water (84+16; v+v) was used as extraction solvent.Losses during sample preparation using two different clean-up columns were not observed. On the contrary, matrix suppression in the ESI-interface of the LC-MS equipment was found to be a serious problem. Depending on the matrix, the latter effect resulted in considerably lower values for trichothecenes when no stable isotope-labelled standards were used to counterbalance this suppression.

  5. Evaluation of a new agar in Uricult-Trio for rapid detection of Escherichia coli in urine.

    PubMed Central

    Dalet, F; Segovia, T

    1995-01-01

    A new commercial agar (Uricult-Trio) with 8-hydroxyquinoline-beta-glucuronide was used to assess 2,536 uropathogens for beta-glucuronidase activity typical of Escherichia coli. Included in the study were 1,807 strains of the family Enterobacteriaceae, 284 strains of nonfermentative bacilli, 345 strains of gram-positive cocci, and 100 yeast strains. In identifying E. coli, the test agar gave a sensitivity of 95.5% and a specificity of 97.2%. Fifty E. coli isolates gave negative reactions; 31 non-E. coli strains produced black colonies characteristic of E. coli. No growth of gram-positive cocci and no false-positive reactions from yeasts were observed. The recovery rate for E. coli on this agar was at least 10% higher than that on blood agar. PMID:7615766

  6. Antiserum-agar plate method for simultaneous detection and direct isolation of Legionella species in clinical and environmental specimens.

    PubMed Central

    Janssen, W A; Hedlund, K W

    1982-01-01

    Colonies of Legionella pneumophila serotypes 1 through 6, L. micdadei, L. bozemanii, L. dumoffii, and L. gormanii, which were developed on filtered yeast extract agar containing polyvalent antiserum, were surrounded by distinct, specific precipitin rings. Images PMID:7050153

  7. Geometric Exponents of Dilute Loop Models

    NASA Astrophysics Data System (ADS)

    Provencher, Guillaume; Saint-Aubin, Yvan; Pearce, Paul A.; Rasmussen, Jørgen

    2012-04-01

    The fractal dimensions of the hull, the external perimeter and of the red bonds are measured through Monte Carlo simulations for dilute minimal models, and compared with predictions from conformal field theory and SLE methods. The dilute models used are those first introduced by Nienhuis. Their loop fugacity is β=-2 \\cos(π/bar{kappa}) where the parameter bar{kappa} is linked to their description through conformal loop ensembles. It is also linked to conformal field theories through their central charges c(bar{kappa})=13-6(bar{kappa}+bar{kappa}^{-1}) and, for the minimal models of interest here, bar{kappa}=p/p' where p and p' are two coprime integers. The geometric exponents of the hull and external perimeter are studied for the pairs ( p, p')=(1,1),(2,3),(3,4),(4,5),(5,6),(5,7), and that of the red bonds for ( p, p')=(3,4). Monte Carlo upgrades are proposed for these models as well as several techniques to improve their speeds. The measured fractal dimensions are obtained by extrapolation on the lattice size H, V→∞. The extrapolating curves have large slopes; despite these, the measured dimensions coincide with theoretical predictions up to three or four digits. In some cases, the theoretical values lie slightly outside the confidence intervals; explanations of these small discrepancies are proposed.

  8. ANALYSIS OF BORON DILUTION TRANSIENTS IN PWRS.

    SciTech Connect

    DIAMOND,D.J.BROMLEY,B.P.ARONSON,A.L.

    2004-02-04

    A study has been carried out with PARCS/RELAP5 to understand the consequences of hypothetical boron dilution events in pressurized water reactors. The scenarios of concern start with a small-break loss-of-coolant accident. If the event leads to boiling in the core and then the loss of natural circulation, a boron-free condensate can accumulate in the cold leg. The dilution event happens when natural circulation is re-established or a reactor coolant pump (RCP) is restarted in violation of operating procedures. This event is of particular concern in B&W reactors with a lowered-loop design and is a Generic Safety Issue for the U.S. Nuclear Regulatory Commission. The results of calculations with the reestablishment of natural circulation show that there is no unacceptable fuel damage. This is determined by calculating the maximum fuel pellet enthalpy, based on the three-dimensional model, and comparing it with the criterion for damage. The calculation is based on a model of a B&W reactor at beginning of the fuel cycle. If an RCP is restarted, unacceptable fuel damage may be possible in plants with sufficiently large volumes of boron-free condensate in the cold leg.

  9. Stoichiometric controls of mercury dilution by growth.

    PubMed

    Karimi, Roxanne; Chen, Celia Y; Pickhardt, Paul C; Fisher, Nicholas S; Folt, Carol L

    2007-05-01

    Rapid growth could significantly reduce methylmercury (MeHg) concentrations in aquatic organisms by causing a greater than proportional gain in biomass relative to MeHg (somatic growth dilution). We hypothesized that rapid growth from the consumption of high-quality algae, defined by algal nutrient stoichiometry, reduces MeHg concentrations in zooplankton, a major source of MeHg for lake fish. Using a MeHg radiotracer, we measured changes in MeHg concentrations, growth and ingestion rates in juvenile Daphnia pulex fed either high (C:P = 139) or low-quality (C:P = 1317) algae (Ankistrodesmus falcatus) for 5 d. We estimated Daphnia steady-state MeHg concentrations, using a biokinetic model parameterized with experimental rates. Daphnia MeHg assimilation efficiencies (approximately 95%) and release rates (0.04 d(-1)) were unaffected by algal nutrient quality. However, Daphnia growth rate was 3.5 times greater when fed high-quality algae, resulting in pronounced somatic growth dilution. Steady-state MeHg concentrations in Daphnia that consumed high-quality algae were one-third those of Daphnia that consumed low-quality algae due to higher growth and slightly lower ingestion rates. Our findings show that rapid growth from high-quality food consumption can significantly reduce the accumulation and trophic transfer of MeHg in freshwater food webs.

  10. Prospective Two-Center Comparison of Three Chromogenic Agars for Methicillin-Resistant Staphylococcus aureus Screening in Hospitalized Patients

    PubMed Central

    Verhulst, Carlo; Nonhoff, Claire; Nagant, Carole; Denis, Olivier; Kluytmans, Jan

    2015-01-01

    Three chromogenic media, chromID MRSA SMART (SMART), chromID MRSA first generation (chromID), and Brilliance MRSA (OX2), were evaluated for methicillin-resistant Staphylococcus aureus (MRSA) screening using 1,220 samples. The sensitivity at 24 h was significantly better with the SMART agar (66.4%) than that with chromID agar (50.5%). Enrichment and incubation until 48 h are still needed for an optimal yield. PMID:26109446

  11. Trace Amounts of Furan-2-Carboxylic Acids Determine the Quality of Solid Agar Plates for Bacterial Culture

    PubMed Central

    Hara, Shintaro; Isoda, Reika; Tahvanainen, Teemu; Hashidoko, Yasuyuki

    2012-01-01

    Background Many investigators have recognised that a significant proportion of environmental bacteria exist in a viable but non-culturable state on agar plates, and some researchers have also noticed that some of such bacteria clearly recover their growth on matrices other than agar. However, the reason why agar is unsuitable for the growth of some bacteria has not been addressed. Methodology/Principal Findings According to the guide of a bioassay for swarming inhibition, we identified 5-hydroxymethylfuran-2-carboxylic acid (5-HMFA) and furan-2-carboxylic acid (FA) as factors that inhibit bacterial swarming and likely inhibit extracellular polysaccharide production on agar. The furan-2-carboxylic acids 5-HMFA and FA effectively inhibited the swarming and swimming of several environmental bacteria at concentrations of 1.8 and 2.3 µg L−1 (13 and 21 nmol L−1), respectively, which are equivalent to the concentrations of these compounds in 0.3% agar. On Luria-Bertani (LB) plates containing 1.0% agar that had been previously washed with MeOH, a mixture of 5-HMFA and FA in amounts equivalent to their original concentrations in the unwashed agar repressed the swarming of Escherichia coli K12 strain W3110, a representative swarming bacterium. Conclusions/Significance Agar that contains trace amounts of 5-HMFA and FA inhibits the proliferation of some slow-growing or difficult-to-culture bacteria on the plates, but it is useful for single colony isolation due to the ease of identification of swarmable bacteria as the non-swarmed colonies. PMID:22848437

  12. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin

    NASA Astrophysics Data System (ADS)

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C.

    2015-03-01

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure—PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery.

  13. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin.

    PubMed

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C

    2015-03-21

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure-PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery.

  14. Experimental measurements for the effect of dilution procedure in blood esterases as animals biomarker for exposure to OP compounds.

    PubMed

    Abass, Kasim Sakran

    2014-01-01

    Organophosphate compounds can bind to carboxylesterase, which may lower the concentration of organophosphate pesticides at the target site enzyme, cholinesterase. It is unclear from the literature whether it is the carboxylesterase affinity for the organophosphate and/or the number of carboxylesterase molecules that is the dominant factor in determining the protective potential of carboxylesterase. The fundamental dilutions and kinetic effects of esterase enzyme are still poorly understood. This study aims to confirm and extend our current knowledge about the effects of dilutions on esterases activities in the blood for birds with respect to protecting the enzyme from organophosphate inhibition. There was significantly higher esterases activities in dilution 1 : 10 in the all blood samples from quail, duck, and chick compared to other dilutions (1 : 5, 1 : 15, 1 : 20, and 1 : 25) in all cases. Furthermore, our results also pointed to the importance of estimating different dilutions effects prior to using in birds as biomarker tools of environmental exposure. Concentration-inhibition curves were determined for the inhibitor in the presence of dilutions 1 : 5, 1 : 10, plus 1 : 15 (to stimulate carboxylesterase). Point estimates (concentrations calculated to produce 20, 50, and 80% inhibition) were compared across conditions and served as a measure of esterase-mediated detoxification. Results with well-known inhibitors (malathion) were in agreement with the literature, serving to support the use of this assay. Among the thiol-esters dilution 1 : 5 was observed to have the highest specificity constant (k(cat)/K(m)), and the K m and k cat values were 176 μM and 16,765 s(-1), respectively, for S-phenyl thioacetate ester, while detected in dilution 1: 15 was the lowest specificity constant (k(cat)/K(m)), and the Km and k cat values were 943 μM and 1154 s(-1), respectively, for acetylthiocholine iodide ester.

  15. Methicillin-Resistant Staphylococcus aureus Grown on Vancomycin-Supplemented Screening Agar Displays Enhanced Biofilm Formation

    PubMed Central

    Chang, Wenjiao; Ding, Ding; Zhang, Shanshan; Dai, Yuanyuan; Pan, Qing; Lu, Huaiwei; Luo, Qingli; Shen, Jilong

    2015-01-01

    Brain heart infusion agar containing 3 mg/liter vancomycin (BHI-V3) was used to screen for heterogeneous vancomycin-intermediate Staphylococcus aureus (hVISA). There was markedly greater biofilm formation by isolates that grew on BHI-V3 than by strains that did not grow on BHI-V3. Increased biofilm formation by hVISA may be mediated by FnbA- and polysaccharide intercellular adhesin-dependent pathways, and upregulation of atlA and sarA may also contribute to enhanced biofilm formation by hVISA upon prolonged exposure to vancomycin. PMID:26459889

  16. Coma in the course of severe poisoning after consumption of red fly agaric (Amanita muscaria).

    PubMed

    Mikaszewska-Sokolewicz, Małgorzata A; Pankowska, Sylwestra; Janiak, Marek; Pruszczyk, Piotr; Łazowski, Tomasz; Jankowski, Krzysztof

    2016-01-01

    Red fly agaric poisoning is rare. It can be consumed for suicidal purposes or its psychedelic effect. The paper describes the case of a young men, who fell into a coma after ingestion of the red toadstools. Quick identification of the poison, early use of gastric lavage and symptomatic treatment resulted in regression of symptoms and lead to the patient's discharge from the hospital on the third day after intoxication. Authors discussing the poisonous alkaloids contained in the red toadtools: ibotenic acid, muscimol, muscasone and muscarine and theirs properties, responsible for the symptoms of intoxication.

  17. CHROMagar Yersinia, a New Chromogenic Agar for Screening of Potentially Pathogenic Yersinia enterocolitica Isolates in Stools

    PubMed Central

    Renaud, Nicolas; Lecci, Laetitia; Courcol, René J.; Simonet, Michel

    2013-01-01

    CHROMagar Yersinia (CAY) is a new chromogenic medium for the presumptive detection of virulent Yersinia enterocolitica in stools. Based on a comparative analysis of 1,494 consecutive stools from hospitalized patients, CAY was found to be just as sensitive as the reference medium (cefsulodin-irgasan-novobiocin agar) but was significantly more specific and had a very low false-positive rate. CAY reduces the workload (and thus costs) for stool analysis and can therefore be recommended for routine laboratory use. PMID:23363840

  18. Comparative study of 6-APA production by free and agar immobilized bacteria in nutrient broth culture.

    PubMed

    Dolui, A K; Das, S

    2011-04-01

    In the present study different bacterial samples were isolated from soil of different places of Dibrugarh and screened for biotransformation ability to produce 6-Aminopenicillanic acid. Among ten isolated bacterial samples, three gram positive bacterial samples designated as AKDD-2, AKDD-4 and AKDD-6 showed the production of 6-APA from penicillin G. Assessment of production of 6-APA after incubation in penicillin G (2 mg/ml) by three different samples separately in free and agar immobilization state was done by HPLC analysis. Reusability of immobilized cells was found successful up to 14 days.

  19. Rapid identification of Candida albicans by using Albicans ID and fluoroplate agar plates.

    PubMed Central

    Rousselle, P; Freydiere, A M; Couillerot, P J; de Montclos, H; Gille, Y

    1994-01-01

    Two commercially available agar media, Albicans ID and Fluoroplate, that use a chromogenic or a fluorogenic substrate for the detection and identification of Candida albicans were evaluated. From 1,006 clinical samples containing 723 yeast strains, 352 C. albicans strains were detected with either of the two media. The sensitivity of each of the two media was 93.8% and the specificity was 98.6%, with five false-positive reactions for Candida tropicalis and no false-negative reactions. PMID:7883894

  20. The Efficiency of UVC Radiation in the Inactivation of
Listeria monocytogenes on Beef-Agar Food Models

    PubMed Central

    James, Christian; James, Stephen

    2015-01-01

    Summary The aim of this study is to evaluate the effect of meat content and surface smoothness on the deactivation of Listeria monocytogenes in beef-agar food models achieved by shortwave ultraviolet (UVC) light. Food models with various meat contents were made using chopped beef slices and agar solution. Prepared models together with a Listeria selective agar (LSA) plate and a slice of cooked beef were inoculated with L. monocytogenes and then exposed to UVC light. Population of Listeria reduced to below the level of detection on the LSA plates. As the content of beef in the beef-agar models increased, more L. monocytogenes cells survived. Survival was greatest on the treated cooked slice of beef. To better understand the effect of surface irregularities, a white light interferometer was used to analyse the surface smoothness of beef-agar media and LSA plates. No correlation was observed between the surface roughness of seven out of nine types of produced beef-agar media and the degree of inactivation resulting from UVC radiation at the given dose, whereas, less bacterial cells were killed as beef content of the food models increased. The findings of the current study show that the chemical composition of the treated sample also plays an important role in pathogen resistance and survival, meaning that two samples with similar surface irregularities but different chemical composition might produce very different inactivation results when exposed to UVC light. PMID:27904353

  1. RAS - Screens & Assays

    Cancer.gov

    A primary goal of the RAS Initiative is to develop assays for RAS activity, localization, and signaling and adapt those assays so they can be used for finding new drug candidates. Explore the work leading to highly validated screening protocols.

  2. Assays of Serum Testosterone.

    PubMed

    Herati, Amin S; Cengiz, Cenk; Lamb, Dolores J

    2016-05-01

    The diagnosis of male hypogonadism depends on an assessment of the clinical signs and symptoms of hypogonadism and serum testosterone level. Current clinical laboratory testosterone assay platforms include immunoassays and mass spectrometry. Despite significant advances to improve the accuracy and precision of the currently available assays, limited comparability exists between assays at the lower and upper extremes of the testosterone range. Because of this lack of comparability, there is no current gold standard assay for the assessment of total testosterone levels.

  3. Evaluation of commercial selective agars in screening for methicillin-resistant Staphylococcus aureus.

    PubMed

    Yang, Hee-Young; Suh, Jin-Tae; Lee, Hee-Joo

    2010-01-01

    To evaluate methicillin-resistant S. aureus (MRSA) detection methods, we compared (a) mannitol salt agar with cefoxitin (MSA-FX), (b) MRSASelect agar (Bio-Rad), (c) MRSA ID (bioMerieuex), and (d) CHROMagar MRSA (BD Diagnostics) as selective media for culturing nasal swab specimens collected from intensive care unit (ICU) patients and healthcare personnel. A total of 99 (17.1%) cases of MRSA were recovered from 578 specimens. Four (5.5%) cases were identified from healthcare personnel and 95 (18.8%) were from ICU patients. The sensitivity of MSA-FX, MRSASelect, MRSA ID, and CHROMagar MRSA was 83.8, 87.9, 80.8, and 84.8% after 18 hr; 92.9, 94.9, 90.9, and 91.9% after 24 hr; and 96.0, 100, 99.0, and 99.0% after 48 hr, respectively. The specificity of MSA-FX, MRSASelect, MRSA ID, and CHROMagar MRSA was 97.7, 99.0, 98.7. and 99.8% after 18 hr; 97.1, 98.5, 98.1, and 99.5% after 24 hr; and 95.2, 97.7, 97.9, and 99.0% after 48 hr, respectively. In conclusion, all four media showed good results after the 24 hr readings, but MRSA ID and CHROMagar MRSA media required readings at 48 hr due to increased sensitivity at this time point.

  4. Abolition of Swarming of Proteus by p-Nitrophenyl Glycerin: Application to Blood Agar Media

    PubMed Central

    Williams, Fred D.

    1973-01-01

    Comparative plate counts were made of Staphylococcus aureus and Streptococcus pyogenes growing on blood agar supplemented with individual chemicals to abolish the swarming of Proteus. B-phenylethanol, sodium azide, and p-nitrophenyl glycerin (PNPG) were used as anti-swarm agents. Each anti-swarm agent effectively abolished swarming for 24 h, but azide failed to control swarming for longer periods of incubation. In addition, azide displayed growth inhibition towards the staphylococci and streptococci resulting in no hemolysis and reduced viable cell numbers with the streptococci. Phenylethanol showed reduced viable cell numbers with the streptococci and unreliable hemolytic reactions. At 0.1 to 0.3 mM, PNPG proved to be a superior anti-swarm agent in that it showed no growth inhibition and allowed normal hemolysis, but abolished swarming for extended periods of time. When laboratory strains of Streptococcus pneumoniae, Klebsiella pneumoniae, Pseudomonas aeruginosa. Listeria monocytogenes, and Vibrio cholerae were screened on a blood agar medium containing 0.1 mm PNPG, they displayed similar growth and hemolytic characteristics to the identical medium without PNPG. PMID:4715553

  5. [Development of chromogenic agar medium for isolation of enterohaemorrhagic Escherichia coli O26].

    PubMed

    Ikedo, M; Komatsu, O; Hara-Kudo, Y; Yamamoto, S; Kumagai, S

    2001-04-01

    Agar media for isolation of enterohaemorrhagic Escherichia coli (EHEC) have been developed primarily for E. coli O157, because this bacterium has most frequently caused EHEC infection. However, there have been few studies for isolation of other serotypes of EHEC, and media appropriate for isolation of such organisms, especially from food samples, are not yet available. Among such serotypes, E. coli O26 has often been isolated from clinical specimens from patients and animals, but not from food samples in outbreaks, because of lack of an appropriate method for isolation. In this study, we tried to develop a new chromogenic agar medium for selective isolation of E. coli O26 using the characteristics of E. coli O26. Fifteen strains of E. coli O26, 11 strains of E. coli O157 and 36 strains of other sero-types E. coli were tested for fermentation of rhamnose, cellobiose, dulcitol, salicin, raffinose, sorbitol, sucrose, lactose, mannitol, arabinose, maltose, xylose and glucose. Rhamnose was fermented by all E. coli strains except for E. coli O26. The other substrates were not effective for differentiating E. coli O26 from the other strains of E. coli. Thus the medium containing rhamnose and 5-bromo-4-chloro-3-indolyl-beta-D-galactopyranoside, which is a substrate of beta-galactosidase specific to coliforms, produced a color of E. coli O26 colonies different from colors of the other bacteria. Furthermore, cefixime and sodium tellulite were added to the composition of the medium for gaining higher selectivity.

  6. Visualization of Biosurfactant Film Flow in a Bacillus subtilis Swarm Colony on an Agar Plate

    PubMed Central

    Kim, Kyunghoon; Kim, Jung Kyung

    2015-01-01

    Collective bacterial dynamics plays a crucial role in colony development. Although many research groups have studied the behavior of fluidic swarm colonies, the detailed mechanics of its motion remains elusive. Here, we developed a visualization method using submicron fluorescent beads for investigating the flow field in a thin layer of fluid that covers a Bacillus subtilis swarm colony growing on an agar plate. The beads were initially embedded in the agar plate and subsequently distributed spontaneously at the upper surface of the expanding colony. We conducted long-term live cell imaging of the B. subtilis colony using the fluorescent tracers, and obtained high-resolution velocity maps of microscale vortices in the swarm colony using particle image velocimetry. A distinct periodic fluctuation in the average speed and vorticity of flow in swarm colony was observed at the inner region of the colony, and correlated with the switch between bacterial swarming and growth phases. At the advancing edge of the colony, both the magnitudes of velocity and vorticity of flow in swarm colony were inversely correlated with the spreading speed of the swarm edge. The advanced imaging tool developed in this study would facilitate further understanding of the effect of micro vortices in swarm colony on the collective dynamics of bacteria. PMID:26343634

  7. An electrochemical approach to monitor pH change in agar media during plant tissue culture.

    PubMed

    Wang, Min; Ha, Yang

    2007-05-15

    In this work, metal oxide microelectrodes were developed to monitor pH change in agar media during plant tissue culture. An antimony wire was produced by a new approach "capillary melt method". The surface of the obtained antimony wire was oxidized in a potassium nitrate melt to fabricate an antimony oxide film for pH sensing. Characterization results show that the oxide layer grown on the wire surface consists of Sb(2)O(3) crystal phase. The sensing response, open-circuit potential, of the electrode has a good linear relationship (R(2)=1.00) with pH value of the test solution. Adding organic compounds into the test media would not affect the linear relationship, although the slope of the lines varied with different ingredients added. The antimony oxide electrodes were employed to continuously monitor pH change of agar culture media during a 2-week plant tissue culture of Dendrobium candidum. The antimony oxide electrode fabricated this way has the advantages of low cost, easy fabrication, fast response, and almost no contamination introduced into the system. It would be suitable for in situ and continuous pH measurement in many bio applications.

  8. Mechanical response of agar gel irradiated with Nd:YAG nanosecond laser pulses

    NASA Astrophysics Data System (ADS)

    Pérez-Gutiérrez, Francisco G.; Evans, Rodger; Camacho-López, Santiago; Aguilar, Guillermo

    2010-02-01

    Nanosecond long laser pulses are used in medical applications where precise tissue ablation with minimal thermal and mechanical collateral damage is required. When a laser pulse is incident on a material, optical energy will be absorbed by a combination of linear and nonlinear absorption according to both: laser light intensity and material properties. In the case of water or gels, the first results in heat generation and thermoelastic expansion; while the second results in an expanding plasma formation that launches a shock wave and a cavitation/boiling bubble. Plasma formation due to nonlinear absorption of nanosecond laser pulses is originated by a combination of multiphoton ionization and thermionic emission of free electrons, which is enhanced when the material has high linear absorption coefficient. In this work, we present measurements of pressure transients originated when 6 ns laser pulses are incident on agar gels with varying linear absorption coefficient, mechanical properties and irradiation geometry using laser radiant exposures above threshold for bubble formation. The underlying hypothesis is that pressure transients are composed of the superposition of both: shock wave originated by hot expanding plasma resulting from nonlinear absorption of optical energy and, thermoelastic expansion originated by heat generation due to linear absorption of optical energy. The objective of this work is to evaluate the relative contribution of each absorption mechanism to mechanical effects in agar gel. Real time pressure transients are recorded with PVDF piezoelectric sensors and time-resilved imaging from 50 μm to 10 mm away from focal point.

  9. Evaluation of brilliance CRE agar for the detection of carbapenem-resistant gram-negative bacteria.

    PubMed

    Bracco, Silvia; Migliavacca, Roberta; Pini, Beatrice; Corbo, Nicoletta; Nucleo, Elisabetta; Brigante, Gioconda; Piazza, Aurora; Micheletti, Piero; Luzzaro, Francesco

    2013-04-01

    The aim of this work was to evaluate the performance of the new chromogenic medium BrillianceTM CREAgar (Thermo Fisher Scientific) for determining the limit of detection of carbapenem-resistant enterobacteria (CRE). A total of 70 clinical isolates were studied. Of these, 30 were well-characterized CRE, including Klebsiella pneumoniae strains producing KPC-, VIM-, and OXA-type enzymes, VIM-positive Enterobacter cloacae and Escherichia coli, NDM-positive E. coli, and enterobacterial isolates characterized by porin loss associated with ESBL production or AmpC hyperproduction. Ten carbapenem-resistant non-fermentative isolates were also included as well as 30 carbapenem-susceptible isolates. Carbapenem-resistant strains were inoculated at three different concentrations onto Brilliance CRE Agar (from 1.5x101 CFU/ml up to 1.5x104 CFU/ml) whereas carbapenem-susceptible isolates were inoculated at a concentration of 1.5x102 CFU/ml. The medium sustained the growth of carbapenem-resistant isolates, showing detection limits from 1.5x101 CFU/ml (in 31/40 cases) to 1.5x104 CFU/ml. No growth was observed with carbapenem-sensitive control strains. Our results indicate that the Brilliance CRE Agar allows the growth of carbapenem-resistant isolates with low detection limits and could represent a useful screening medium for both enterobacteria and non-fermentative Gram-negative strains resistant to carbapenems.

  10. Maximum independent set on diluted triangular lattices

    NASA Astrophysics Data System (ADS)

    Fay, C. W., IV; Liu, J. W.; Duxbury, P. M.

    2006-05-01

    Core percolation and maximum independent set on random graphs have recently been characterized using the methods of statistical physics. Here we present a statistical physics study of these problems on bond diluted triangular lattices. Core percolation critical behavior is found to be consistent with the standard percolation values, though there are strong finite size effects. A transfer matrix method is developed and applied to find accurate values of the density and degeneracy of the maximum independent set on lattices of limited width but large length. An extrapolation of these results to the infinite lattice limit yields high precision results, which are tabulated. These results are compared to results found using both vertex based and edge based local probability recursion algorithms, which have proven useful in the analysis of hard computational problems, such as the satisfiability problem.

  11. Electronic bandstructure of semiconductor dilute bismide structures

    NASA Astrophysics Data System (ADS)

    Erucar, T.; Nutku, F.; Donmez, O.; Erol, A.

    2017-02-01

    In this work electronic band structure of dilute bismide GaAs/GaAs1-xBix quantum well structures with 1.8% and 3.75% bismuth compositions have been investigated both experimentally and theoretically. Photoluminescence (PL) measurements reveal that effective bandgap of the samples decreases approximately 65 meV per bismuth concentration. Temperature dependence of the effective bandgap is obtained to be higher for the sample with higher bismuth concentration. Moreover, both asymmetric characteristic at the low energy tail of the PL and full width at half maximum (FWHM) of PL peak increase with increasing bismuth composition as a result of increased Bi related defects located above valence band (VB). In order to explain composition dependence of the effective bandgap quantitatively, valence band anti-crossing (VBAC) model is used. Bismuth composition and temperature dependence of effective bandgap in a quantum well structure is modeled by solving Schrödinger equation and compared with experimental PL data.

  12. Dilution Jet Mixing Program, phase 1

    NASA Technical Reports Server (NTRS)

    Srinivasan, R.; Berenfeld, A.; Mongia, H. C.

    1982-01-01

    The effect of jet to mainstream density ratio, flow area convergence as encounted in transition sections, and nonuniform mainstream profile upstream of dilution orifices on the mixing of a row of jets with a confined cross flow was quantified. It is found that: (1) jet spreading rate in transverse direction is increased with increasing J, H/D and with decreasing S/D; (2) the density ratio has only a second order effect on the jet mixing characteristics for a constant momentum ratio; (3) the temperature distributions in the jet mixing region are strongly influenced by the undisturbed mainstream profile; (4) flow area convergence enhances mixing in radial and transverse directions. An asymmetric convergent duct with flat wall injection has the same jet mixing characteristics as a symmetric convergent duct. An asymmetric convergent duct with slant wall injection has a faster jet spreading rate in the transverse direction.

  13. Negative magnetophoresis in diluted ferrofluid flow.

    PubMed

    Hejazian, Majid; Nguyen, Nam-Trung

    2015-07-21

    We report magnetic manipulation of non-magnetic particles suspended in diluted ferrofluid. Diamagnetic particles were introduced into a circular chamber to study the extent of their deflection under the effect of a non-uniform magnetic field of a permanent magnet. Since ferrofluid is a paramagnetic medium, it also experiences a bulk magnetic force that in turn induces a secondary flow opposing the main hydrodynamic flow. Sheath flow rate, particle size, and magnetic field strength were varied to examine this complex behaviour. The combined effect of negative magnetophoresis and magnetically induced secondary flow leads to various operation regimes, which can potentially find applications in separation, trapping and mixing of diamagnetic particles such as cells in a microfluidic system.

  14. Random bilayer phases of dilute surfactant solutions

    NASA Astrophysics Data System (ADS)

    Cates, M. E.; Roux, D.

    1990-12-01

    Surfactant molecules in dilute solution may aggregate reversibly into extended structures. For suitably chosen molecules, the preferred packing involves a locally flat bilayer which tends to wander entropically at large distances. At low temperatures (and/or high concentrations) the system forms a stack of flat sheets with one-dimensional quasi-long range order (a smectic liquid crystal), but at high temperatures or low concentrations, the stack can melt into a random surface structure that resembles a multiply connected labyrinth or 'sponge' of bilayer in a sea of solvent. Recent theoretical and experimental progress in understanding the properties of the sponge is reviewed. The authors argue that the sponge phase may provide a good system for the study of various liquid-state critical phenomena.

  15. Fermi Surface of the Most Dilute Superconductor

    NASA Astrophysics Data System (ADS)

    Lin, Xiao; Zhu, Zengwei; Fauqué, Benoît; Behnia, Kamran

    2013-04-01

    The origin of superconductivity in bulk SrTiO3 is a mystery since the nonmonotonous variation of the critical transition with carrier concentration defies the expectations of the crudest version of the BCS theory. Here, employing the Nernst effect, an extremely sensitive probe of tiny bulk Fermi surfaces, we show that, down to concentrations as low as 5.5×1017cm-3, the system has both a sharp Fermi surface and a superconducting ground state. The most dilute superconductor currently known therefore has a metallic normal state with a Fermi energy as little as 1.1 meV on top of a band gap as large as 3 eV. The occurrence of a superconducting instability in an extremely small, single-component, and barely anisotropic Fermi surface implies strong constraints for the identification of the pairing mechanism.

  16. Changes in soluble sugar, starch, and alcohol dehydrogenase in Arabidopsis thaliana exposed to N2 diluted atmospheres

    NASA Technical Reports Server (NTRS)

    Porterfield, D. M.; Crispi, M. L.; Musgrave, M. E.

    1997-01-01

    Proper exchange of atmospheric gases is important for normal root and shoot metabolism in plants. This study was conducted to determine how restricted air supply affects foliar carbohydrates, while using the marker enzyme alcohol dehydrogenase (ADH) to report on the oxygenation status of the rootzone. Fourteen-day-old Arabidopsis thaliana (L.) Heynh. plants grown singly in 7-ml tubes containing agarified nutrient medium were placed in coupled Magenta vessels and exposed for six days to either ambient air or one of six different air/nitrogen dilutions. Redox potential of the agar medium was measured immediately after harvesting and freezing leaf tissue, and then root systems were quickly extracted from the agar and frozen for subsequent analyses. Redox potential measurements indicated that this series of gas mixtures produced a transition from hypoxia to anoxia in the root zones. Root ADH activity increased at higher rates as the redox potential neared anoxic levels. In contrast, ADH mRNA expression quickly neared its maximum as the medium became hypoxic and showed little further increase as it became anoxic. Foliar carbohydrate levels increased 1.5- to 2-fold with decreased availability of metabolic gases, with starch increasing at higher concentrations of air than soluble carbohydrate. The results serve as a model for plant performance under microgravity conditions, where absence of convective air movement prevents replenishment of metabolic gases.

  17. Stable isotope ratios as a tool in microbial forensics--part 3. Effect of culturing on agar-containing growth media.

    PubMed

    Kreuzer-Martin, Helen W; Chesson, Lesley A; Lott, Michael J; Ehleringer, James R

    2005-11-01

    Stable isotope ratios of hydrogen and oxygen in microbes have been shown to be functions of the corresponding isotope ratios of the water with which the culture medium was prepared, and thus to contain a potential geographic signal. Water can evaporate from agar (solid) media during culturing, changing its isotope ratios. Here we describe the effect of drying on the isotope ratios of water extracted from agar media and the H and O stable isotope ratios ratios of Bacillus subtilis spores cultured on agar. The delta2H vs delta18O relationship of water in Petri dish agar was surprisingly constant during evaporation regardless of the ambient relative humidity, making it possible to calculate the approximate isotope ratios of the original water, even in significantly evaporated agar. The H stable isotope ratios of spores cultured on agar remained relatively unchanged as the agar dried, but the O ratio became significantly enriched.

  18. Evaluation of the Granada agar plate for detection of vaginal and rectal group B streptococci in pregnant women.

    PubMed

    Gil, E G; Rodríguez, M C; Bartolomé, R; Berjano, B; Cabero, L; Andreu, A

    1999-08-01

    Granada medium was evaluated for the detection of group B streptococci (GBS) in vaginal and rectal swabs compared with selective Columbia blood agar and selective Lim broth. From May 1996 to March 1998, 702 pregnant women (35 to 37 weeks of gestation) participated in this three-phase study; 103 (14.7%) of these women carried GBS. In the first phase of the experiment (n = 273 women), vaginorectal specimens were collected on the same swab; the sensitivities of Granada tube, selective Columbia blood agar, and Lim broth were 31.4, 94.3, and 74.3%, respectively. In the second and third phases (n = 429 women), vaginal and rectal specimens were collected separately; the sensitivities of Granada plate, selective Columbia blood agar, and Lim broth (subcultured at 4 h on selective Columbia agar in the second phase and at 18 to 24 h in Granada plate in the third phase) were 91.1, 83.9, and 75%, respectively, in the second phase and 88.5, 90.4, and 63.5%, respectively, in the third phase. There were no statistically significant differences in GBS recovery between the Granada agar plate and selective Columbia blood agar, but the Granada plate provided a clear advantage; the characteristic red-orange colonies produced overnight by GBS can be identified by the naked eye and is so specific that further identification is unnecessary. The use of the Granada tube and Lim broth did not result in increased isolation of GBS. In conclusion, the Granada agar plate is highly sensitive for detecting GBS in vaginal and rectal swabs from pregnant women and can provide results in 18 to 24 h.

  19. Evaluation of the Granada Agar Plate for Detection of Vaginal and Rectal Group B Streptococci in Pregnant Women

    PubMed Central

    Gil, E. García; Rodríguez, M. C.; Bartolomé, R.; Berjano, B.; Cabero, L.; Andreu, A.

    1999-01-01

    Granada medium was evaluated for the detection of group B streptococci (GBS) in vaginal and rectal swabs compared with selective Columbia blood agar and selective Lim broth. From May 1996 to March 1998, 702 pregnant women (35 to 37 weeks of gestation) participated in this three-phase study; 103 (14.7%) of these women carried GBS. In the first phase of the experiment (n = 273 women), vaginorectal specimens were collected on the same swab; the sensitivities of Granada tube, selective Columbia blood agar, and Lim broth were 31.4, 94.3, and 74.3%, respectively. In the second and third phases (n = 429 women), vaginal and rectal specimens were collected separately; the sensitivities of Granada plate, selective Columbia blood agar, and Lim broth (subcultured at 4 h on selective Columbia agar in the second phase and at 18 to 24 h in Granada plate in the third phase) were 91.1, 83.9, and 75%, respectively, in the second phase and 88.5, 90.4, and 63.5%, respectively, in the third phase. There were no statistically significant differences in GBS recovery between the Granada agar plate and selective Columbia blood agar, but the Granada plate provided a clear advantage; the characteristic red-orange colonies produced overnight by GBS can be identified by the naked eye and is so specific that further identification is unnecessary. The use of the Granada tube and Lim broth did not result in increased isolation of GBS. In conclusion, the Granada agar plate is highly sensitive for detecting GBS in vaginal and rectal swabs from pregnant women and can provide results in 18 to 24 h. PMID:10405415

  20. PicoGreen Assay of Circular DNA for Radiation Biodosimetry

    PubMed Central

    Zhang, Steven B.; Yang, Shanmin; Vidyasagar, Sadasivan; Zhang, Mei; Casey-Sawicki, Katherine; Liu, Chaomei; Yin, Liangjie; Zhang, Lei; Cao, Yongbing; Tian, Yeping; Swarts, Steven; Fenton, Bruce M.; Keng, Peter; Zhang, Lurong; Okunieff, Paul

    2015-01-01

    We developed a simple, rapid and quantitative assay using the fluorescent probe PicoGreen to measure the concentration of ionizing radiation-induced double-stranded DNA (dsDNA) in mouse plasma, and we correlated this concentration with the radiation dose. With 70 μl of blood obtained by fingerstick, this 30 min assay reduces protein interference without extending sample processing time. Plasma from nonirradiated mice (BALB/c and NIH Swiss) was pooled, diluted and spiked with dsDNA to establish sensitivity and reproducibility of the assay to quantify plasma dsDNA. The assay was then used to directly quantify dsDNA in plasma at 0–48 h after mice received 0–10 Gy total-body irradiation (TBI). There are three optimal conditions for this assay: 1:10 dilution of plasma in water; 1:200 dilution of PicoGreen reagent in water; and calibration of radiation-induced dsDNA concentration through a standard addition method using serial spiking of samples with genomic dsDNA. Using the internal standard calibration curve of the spiked samples method, the signal developed within 5 min, exhibiting a linear signal (r2 0.997). The radiation-induced elevation of plasma DNA in mice started at 1–3 h, peaked at 9 h and gradually returned to baseline at 24 h after TBI (6 Gy). DNA levels in plasma collected from mice 9 h after 0–10 Gy TBI correlated strongly with dose (r2 0.991 and 0.947 for BALB/c and NIH Swiss, respectively). Using the PicoGreen assay, we observed a radiation dose-dependent response in extracellular plasma DNA 9 h after irradiation with an assay time ≤30 min. PMID:25574588

  1. PicoGreen assay of circular DNA for radiation biodosimetry.

    PubMed

    Zhang, Steven B; Yang, Shanmin; Vidyasagar, Sadasivan; Zhang, Mei; Casey-Sawicki, Katherine; Liu, Chaomei; Yin, Liangjie; Zhang, Lei; Cao, Yongbing; Tian, Yeping; Swarts, Steven; Fenton, Bruce M; Keng, Peter; Zhang, Lurong; Okunieff, Paul

    2015-02-01

    We developed a simple, rapid and quantitative assay using the fluorescent probe PicoGreen to measure the concentration of ionizing radiation-induced double-stranded DNA (dsDNA) in mouse plasma, and we correlated this concentration with the radiation dose. With 70 μl of blood obtained by fingerstick, this 30 min assay reduces protein interference without extending sample processing time. Plasma from nonirradiated mice (BALB/c and NIH Swiss) was pooled, diluted and spiked with dsDNA to establish sensitivity and reproducibility of the assay to quantify plasma dsDNA. The assay was then used to directly quantify dsDNA in plasma at 0-48 h after mice received 0-10 Gy total-body irradiation (TBI). There are three optimal conditions for this assay: 1:10 dilution of plasma in water; 1:200 dilution of PicoGreen reagent in water; and calibration of radiation-induced dsDNA concentration through a standard addition method using serial spiking of samples with genomic dsDNA. Using the internal standard calibration curve of the spiked samples method, the signal developed within 5 min, exhibiting a linear signal (r(2) = 0.997). The radiation-induced elevation of plasma DNA in mice started at 1-3 h, peaked at 9 h and gradually returned to baseline at 24 h after TBI (6 Gy). DNA levels in plasma collected from mice 9 h after 0-10 Gy TBI correlated strongly with dose (r(2) = 0.991 and 0.947 for BALB/c and NIH Swiss, respectively). Using the PicoGreen assay, we observed a radiation dose-dependent response in extracellular plasma DNA 9 h after irradiation with an assay time ≤ 30 min.

  2. Potency evaluation of rabies vaccine for human use: the impact of the reduction in the number of animals per dilution.

    PubMed

    de Moura, Wlamir Corrêa; de Araujo, Humberto Pinheiro; Cabello, Pedro Hernan; Romijn, Phyllis Catharina; Leite, José Paulo Gagliardi

    2009-06-01

    In order to evaluate the effects of reducing the number of animals used in the NIH mouse protection test for potency determination of inactivated rabies vaccines for human use, a retrospective study of the results obtained in the Brazilian National Control Laboratory, Instituto Nacional de Controle de Qualidade em Saúde (INCQS), was performed, comprising 214 vaccine lots. The INCQS Standard Operating Procedure establishes the use of three vaccine dilutions and 18 animals per dilution, separated into two cages with 9 mice each. The results of the two cages of each dilution were considered as two different groups (C1 and C2), and therefore, for each vaccine lot, three results were obtained: one for the standard test (ST) with 18 mice, one using the C1 cages with 9 mice and another using the C2 cages with 9 mice. The results were evaluated as repeated measures of the same method on the same samples. In this study, the effects of the reduction in: (a) the measurement error and its association with the size of measurement, (b) the agreement between the results using the concordance coefficient of correlation, (c) the agreement of categorized results as "Pass" or "Fail" using the Kappa index, (d) the precision of potency determinations using the 95% confidence interval and (e) the incidence of statistically invalid assays due to non-linearity and non-parallelism were evaluated. It was concluded that the results from the NIH mouse protection test using 9 mice per dilution are in good agreement with the results obtained using 18 mice per dilution. Therefore, nine animals per dilution is a suitable number to meet the statistical requirement for valid assays.

  3. The line blot assay: problems with titrating first and second antibodies for Western blot and immunohistochemistry assays?

    PubMed

    Rojas-Espinosa, O; Silva-Miranda, M; Wek-Rodriguez, K; Arce-Paredes, P

    2006-01-01

    We describe a technique designed to assess the optimal dilution of primary and secondary antibodies, to be used in Western blot, dot blot, the multi-antigen print immunoassay (MAPIA) and immunohistochemistry assays. The method that we call "line blot" is not an alternative but a practical, complementary tool for the above techniques that assures definitive results are obtained from single assays, so there is no need to repeat the assay. As with most immunoenzymatic assays, the line blot assay is very sensitive, allowing the detection of absolute amounts of antigen as low as 2.5 ng in the 0.5 cm-long segment line (see Results), depending on the strength of the secondary, enzyme-labelled antibody.

  4. Anti-yeast activity of a food-grade dilution-stable microemulsion.

    PubMed

    Zhang, Hui; Xu, Yaoqi; Wu, Lijiang; Zheng, Xiaodong; Zhu, Songming; Feng, Fengqin; Shen, Lirong

    2010-07-01

    The anti-yeast activities of a food-grade dilution-stable microemulsion against Candida albicans and Saccharomyces cerevisiae have been studied. The weight ratio of the formulated microemulsion is glycerol monolaurate (GML)/propionic acid/Tween 80/sodium benzoate (SB)/water = 3:9:14:14:24. Results of anti-yeast activity on solid medium by agar diffusion method showed that the anti-yeast activity of the microemulsion at 4.8 mg/ml was comparable to that of natamycin at 0.1 mg/ml as positive control. Results of anti-yeast activity in liquid medium by broth dilution method showed that the growth of both C. albicans and S. cerevisiae was completely inhibited when the liquid medium containing 10(6) cfu/ml was treated with 1.2 mg/ml microemulsion, which was determined as minimum fungicidal concentration. The kinetics of killing results showed that the microemulsion killed over 90% yeast cells rapidly within 15 min and caused a complete loss of viability in 120 min. Among the components, SB and GML had a similar anti-yeast activity, followed by propionic acid, while Tween 80 exhibited no activity and could not enhance the anti-yeast activities of these components, and it was revealed that the anti-yeast activity of the microemulsion was attributed to a combination of propionic acid, GML, and SB. The anti-yeast activity of the microemulsion was in good agreement with the leakage of 260-nm absorbing materials and the observation of transmission electron microscopy, indicating that the microemulsion induced the disruption and dysfunction of the cell membrane.

  5. Performance of the EUCAST disk diffusion method, the CLSI agar screen method, and the Vitek 2 automated antimicrobial susceptibility testing system for detection of clinical isolates of Enterococci with low- and medium-level VanB-type vancomycin resistance: a multicenter study.

    PubMed

    Hegstad, Kristin; Giske, Christian G; Haldorsen, Bjørg; Matuschek, Erika; Schønning, Kristian; Leegaard, Truls M; Kahlmeter, Gunnar; Sundsfjord, Arnfinn

    2014-05-01

    Different antimicrobial susceptibility testing methods to detect low-level vancomycin resistance in enterococci were evaluated in a Scandinavian multicenter study (n=28). A phenotypically and genotypically well-characterized diverse collection of Enterococcus faecalis (n=12) and Enterococcus faecium (n=18) strains with and without nonsusceptibility to vancomycin was examined blindly in Danish (n=5), Norwegian (n=13), and Swedish (n=10) laboratories using the EUCAST disk diffusion method (n=28) and the CLSI agar screen (n=18) or the Vitek 2 system (bioMérieux) (n=5). The EUCAST disk diffusion method (very major error [VME] rate, 7.0%; sensitivity, 0.93; major error [ME] rate, 2.4%; specificity, 0.98) and CLSI agar screen (VME rate, 6.6%; sensitivity, 0.93; ME rate, 5.6%; specificity, 0.94) performed significantly better (P=0.02) than the Vitek 2 system (VME rate, 13%; sensitivity, 0.87; ME rate, 0%; specificity, 1). The performance of the EUCAST disk diffusion method was challenged by differences in vancomycin inhibition zone sizes as well as the experience of the personnel in interpreting fuzzy zone edges as an indication of vancomycin resistance. Laboratories using Oxoid agar (P<0.0001) or Merck Mueller-Hinton (MH) agar (P=0.027) for the disk diffusion assay performed significantly better than did laboratories using BBL MH II medium. Laboratories using Difco brain heart infusion (BHI) agar for the CLSI agar screen performed significantly better (P=0.017) than did those using Oxoid BHI agar. In conclusion, both the EUCAST disk diffusion and CLSI agar screening methods performed acceptably (sensitivity, 0.93; specificity, 0.94 to 0.98) in the detection of VanB-type vancomycin-resistant enterococci with low-level resistance. Importantly, use of the CLSI agar screen requires careful monitoring of the vancomycin concentration in the plates. Moreover, disk diffusion methodology requires that personnel be trained in interpreting zone edges.

  6. Soft-agar-coated filter method for early detection of viable and thermostable direct hemolysin (TDH)- or TDH-related hemolysin-producing Vibrio parahaemolyticus in seafood.

    PubMed

    Hayashi, Sachiko; Okura, Masatoshi; Osawa, Ro

    2006-07-01

    A novel method for detecting viable and thermostable direct hemolysin (TDH)-producing or TDH-related hemolysin (TRH)-producing Vibrio parahaemolyticus in seafood was developed. The method involved (i) enrichment culture, selective for viable, motile cells penetrating a soft-agar-coated filter paper, and (ii) a multiplex PCR assay targeting both the TDH gene (tdh) and TRH gene (trh) following DNase pretreatment on the test culture to eradicate any incidental DNAs that might have been released from dead cells of tdh- or trh-positive (tdh+ trh+) strains and penetrated the agar-coated filter. A set of preliminary laboratory tests performed on 190 ml of enrichment culture that had been inoculated simultaneously with ca. 100 viable cells of a strain of tdh+ trh+ V. parahaemolyticus and dense populations of a viable strain of tdh- and trh-negative V. parahaemolyticus or Vibrio alginolyticus indicated that the method detected the presence of viable tdh+ trh+ strains. Another set of preliminary tests on 190 ml of enrichment culture that had been initially inoculated with a large number of dead cells of the tdh+ trh+ strain together with dense populations of the tdh- and trh-negative strains confirmed that the method did not yield any false-positive results. Subsequent quasi-field tests using various seafood samples (ca. 20 g), each of which was experimentally contaminated with either or both hemolysin-producing strains at an initial density of ca. 5 to 10 viable cells per gram, demonstrated that contamination could be detected within 2 working days.

  7. Evaluation of CHROMagar STEC and STEC O104 Chromogenic Agar Media for Detection of Shiga Toxin-Producing Escherichia coli in Stool Specimens

    PubMed Central

    Ruckly, Corinne; Carle, Isabelle; Lejay-Collin, Monique

    2013-01-01

    The performance of CHROMagar STEC and CHROMagar STEC O104 (CHROMagar Microbiology, Paris, France) media for the detection of Shiga toxin-producing Escherichia coli (STEC) was assessed with 329 stool specimens collected over 14 months from patients with suspected STEC infections (June 2011 to August 2012). The CHROMagar STEC medium, after an enrichment broth step, allowed the recovery of the STEC strain from 32 of the 39 (82.1%) Shiga toxin-positive stool specimens, whereas the standard procedure involving Drigalski agar allowed the recovery of only three additional STEC strains. The isolates that grew on CHROMagar STEC medium belonged to 15 serotypes, including the prevalent non-sorbitol-fermenting (NSF) O157:H7, O26:H11, and O104:H4 serotypes. The sensitivity, specificity, and positive and negative predictive values for the CHROMagar STEC medium were between 89.1% and 91.4%, 83.7% and 86.7%, 40% and 51.3%, and 98% and 98.8%, respectively, depending on whether or not stx-negative eae-positive E. coli was considered atypical enteropathogenic E. coli (EPEC) or STEC that had lost Shiga toxin genes during infection. In conclusion, the good performance of CHROMagar STEC agar medium, in particular, the high negative predictive value, and its capacity to identify NSF O157:H7 as well as common non-O157 STEC may be useful for clinical bacteriology, public health, and reference laboratories; it could be used in addition to a method targeting Shiga toxins (detection of stx genes by PCR, immunodetection of Shiga toxins in stool specimens, or Vero cell cytotoxicity assay) as an alternative to O157 culture medium. This combined approach should allow rapid visualization of both putative O157 and non-O157 STEC colonies for subsequent characterization, essential for real-time surveillance of STEC infections and investigations of outbreaks. PMID:23284030

  8. Melatonin Protects Human Cells from Clustered DNA Damages, Killing and Acquisition of Soft Agar Growth Induced by X-rays or 970 MeV/n Fe ions

    SciTech Connect

    Das, B.; Sutherland, B.; Bennett, P. V.; Cutter, N. C.; Sutherland, J. C.

    2011-06-01

    We tested the ability of melatonin (N-acetyl-5 methoxytryptamine), a highly effective radical scavenger and human hormone, to protect DNA in solution and in human cells against induction of complex DNA clusters and biological damage induced by low or high linear energy transfer radiation (100 kVp X-rays, 970 MeV/nucleon Fe ions). Plasmid DNA in solution was treated with increasing concentrations of melatonin (0.0-3.5 mM) and were irradiated with X-rays. Human cells (28SC monocytes) were also irradiated with X-rays and Fe ions with and without 2 mM melatonin. Agarose plugs containing genomic DNA were subjected to Contour Clamped Homogeneous Electrophoretic Field (CHEF) followed by imaging and clustered DNA damages were measured by using Number Average length analysis. Transformation experiments on human primary fibroblast cells using soft agar colony assay were carried out which were irradiated with Fe ions with or without 2 mM melatonin. In plasmid DNA in solution, melatonin reduced the induction of single- and double-strand breaks. Pretreatment of human 28SC cells for 24 h before irradiation with 2 mM melatonin reduced the level of X-ray induced double-strand breaks by {approx}50%, of abasic clustered damages about 40%, and of Fe ion-induced double-strand breaks (41% reduction) and abasic clusters (34% reduction). It decreased transformation to soft agar growth of human primary cells by a factor of 10, but reduced killing by Fe ions only by 20-40%. Melatonin's effective reduction of radiation-induced critical DNA damages, cell killing, and striking decrease of transformation suggest that it is an excellent candidate as a countermeasure against radiation exposure, including radiation exposure to astronaut crews in space travel.

  9. Dilute acid/metal salt hydrolysis of lignocellulosics

    DOEpatents

    Nguyen, Quang A.; Tucker, Melvin P.

    2002-01-01

    A modified dilute acid method of hydrolyzing the cellulose and hemicellulose in lignocellulosic material under conditions to obtain higher overall fermentable sugar yields than is obtainable using dilute acid alone, comprising: impregnating a lignocellulosic feedstock with a mixture of an amount of aqueous solution of a dilute acid catalyst and a metal salt catalyst sufficient to provide higher overall fermentable sugar yields than is obtainable when hydrolyzing with dilute acid alone; loading the impregnated lignocellulosic feedstock into a reactor and heating for a sufficient period of time to hydrolyze substantially all of the hemicellulose and greater than 45% of the cellulose to water soluble sugars; and recovering the water soluble sugars.

  10. 40 CFR 89.424 - Dilute emission sampling calculations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... mode for bag measurements and diesel heat exchanger system measurements is determined from the..., for diesel heat exchanger systems, average hydrocarbon concentration of the dilute exhaust sample...

  11. Toxicity of contaminated sediments in dilution series with control sediments

    USGS Publications Warehouse

    Nelson, M.K.; Landrum, P.F.; Burton, G.A.; Klaine, S.J.; Crecelius, E.A.; Byl, T.D.; Gossiaux, Duane C.; Tsymbal, V.N.; Cleveland, L.; Ingersoll, Christopher G.; Sasson-Brickson, G.

    1993-01-01

    The use of dilutions has been the foundation of our approach for assessing contaminated water, and accordingly, it may be important to establish similar or parallel approaches for sediment dilutions. Test organism responses to dilution gradients can identify the degree of necessary sediment alteration to reduce the toxicity. Using whole sediment dilutions to represent the complex interactions of in situ sediments can identify the toxicity, but the selection of the appropriate diluent for the contaminated sediment may affect the results and conclusions drawn. Contaminated whole sediments were examined to evaluate the toxicity of dilutions of sediments with a diversity of test organisms. Dilutions of the contaminated sediments were prepared with differing diluents that varied in organic carbon content, particle size distribution, and volatile solids. Studies were conducted using four macroinvertebrates and a vascular, rooted plant. Responses by some test organisms followed a sigmoidal dose-response curve, but others followed a U-shaped curve. Initial dilutions reduced toxicity as expected, but further dilution resulted in an increase in toxicity. The type of diluent used was an important factor in assessing the sediment toxicity, because the control soil reduced toxicity more effectively than sand as a diluent of the same sediment. Using sediment chemical and physical characteristics as an indicator of sediment dilution may not be as useful as chemical analysis of contaminants, but warrants further investigation.

  12. Comparison of reverse transcriptase PCR, reverse transcriptase loop-mediated isothermal amplification, and culture-based assays for Salmonella detection from pork processing environments.

    PubMed

    Techathuvanan, Chayapa; Draughon, Frances Ann; D'Souza, Doris Helen

    2011-02-01

    Novel rapid Salmonella detection assays without the need for sophisticated equipment or labor remain in high demand. Real-time reverse transcriptase PCR (RT-PCR) assays, though rapid and sensitive, require expensive thermocyclers, while a novel RT loop-mediated isothermal amplification (RT-LAMP) method requires only a simple water bath. Our objective was to compare the detection sensitivity of Salmonella Typhimurium from the pork processing environment by RT-LAMP, RT-PCR, and culture-based assays. Carcass and surface swabs and carcass rinses were obtained from a local processing plant. Autoclaved carcass rinses (500 ml) were spiked with Salmonella Typhimurium and filtered. Filters were placed in stomacher bags containing tetrathionate broth (TTB) and analyzed with or without 10-h enrichment at 37 °C. Natural swabs were stomached with buffered peptone water, and natural carcass rinses were filtered, preenriched, and further enriched in TTB. Serially-diluted enriched samples were enumerated by spread plating on xylose lysine Tergitol 4 agar. RNA was extracted from 5 ml of enriched TTB with TRIzol. RT-LAMP assay using previously described invA primers was conducted at 62 °C for 90 min in a water bath with visual detection and by gel electrophoresis. SYBR Green I-based-real-time RT-PCR was carried out with invA primers followed by melt temperature analysis. The results of RT-LAMP detection for spiked carcass rinses were comparable to those of RT-PCR and cultural plating, with detection limits of 1 log CFU/ml, although they were obtained significantly faster, within 24 h including preenrichment and enrichment. RT-LAMP showed 4 of 12 rinse samples positive, while RT-PCR showed 1 of 12 rinse samples positive. For swabs, 6 of 27 samples positive by RT-LAMP and 5 of 27 by RT-PCR were obtained. This 1-day RT-LAMP assay shows promise for routine Salmonella screening by the pork industry.

  13. Clinical correlations with chemosensitivities measured in a rapid thymidine incorporation assay

    SciTech Connect

    Sondak, V.K.; Bertelsen, C.A.; Tanigawa, N.; Hildebrand-Zanki, S.U.; Morton, D.L.; Korn, E.L.; Kern, D.H.

    1984-04-01

    A rapid assay for in vitro chemosensitivity testing measuring (3H)thymidine incorporation has been developed. Results of this assay correlate highly with chemosensitivities determined by the soft-agar clonogenic assay. A correlative study was carried out on 219 solid tumor specimens to assess the ability of the rapid assay to predict clinical response to antineoplastic therapy. One hundred forty-two of 219 tumors (65%) yielded chemosensitivity data. Of these, 33 were evaluable for in vitro-in vivo correlations. In vitro sensitivity (greater than or equal to 80% inhibition of thymidine uptake) was associated with clinical response in 6 of 13 patients. In vitro resistance was associated with progressive disease in 20 of 20 patients. The rapid assay offers several advantages over the soft-agar clonogenic assay, including higher success rate, avoidance of clumping artifact, shorter time course (5 days), and very low false-negative rate. Further refinement may be necessary, but the rapid assay appears to have potential for individualizing solid tumor chemotherapy.

  14. Colorimetric protein assay techniques.

    PubMed

    Sapan, C V; Lundblad, R L; Price, N C

    1999-04-01

    There has been an increase in the number of colorimetric assay techniques for the determination of protein concentration over the past 20 years. This has resulted in a perceived increase in sensitivity and accuracy with the advent of new techniques. The present review considers these advances with emphasis on the potential use of such technologies in the assay of biopharmaceuticals. The techniques reviewed include Coomassie Blue G-250 dye binding (the Bradford assay), the Lowry assay, the bicinchoninic acid assay and the biuret assay. It is shown that each assay has advantages and disadvantages relative to sensitivity, ease of performance, acceptance in the literature, accuracy and reproducibility/coefficient of variation/laboratory-to-laboratory variation. A comparison of the use of several assays with the same sample population is presented. It is suggested that the most critical issue in the use of a chromogenic protein assay for the characterization of a biopharmaceutical is the selection of a standard for the calibration of the assay; it is crucial that the standard be representative of the sample. If it is not possible to match the standard with the sample from the perspective of protein composition, then it is preferable to use an assay that is not sensitive to the composition of the protein such as a micro-Kjeldahl technique, quantitative amino acid analysis or the biuret assay. In a complex mixture it might be inappropriate to focus on a general method of protein determination and much more informative to use specific methods relating to the protein(s) of particular interest, using either specific assays or antibody-based methods. The key point is that whatever method is adopted as the 'gold standard' for a given protein, this method needs to be used routinely for calibration.

  15. Is flow cytometry crossmatch analysis using sera with different dilutions important for pretransplant analysis? A case report.

    PubMed

    Sağıroğlu, T; Tozkır, H; Kılıçarslan-Ayna, T; Yağcı, M A; Sezer, A; Carin, M

    2012-01-01

    The most effective form of treatment for chronic renal failure is kidney transplantation from a cadaver or a living donor. For a kidney transplant to be successful, tissue compatibility and a lack of donor-specific anti-human leukocyte antigen (HLA) antibodies in the circulation of the patient are vital, in addition to ABO blood group compatibility. The presence of anti-HLA antibodies is assayed before transplantation using various methods, but because organ rejections have been observed in previous studies, different techniques are required to detect anti-HLA antibodies. Today, flow cytometry crossmatching is one of the most important and effective techniques in testing for donor-specific anti-HLA antibodies (DSAs). If weakly positive serum is assayed after serial dilution, it can yield high positivity. Herein, we describe the differences between the results for diluted and undiluted weakly positive sera studied using the flow cytometry crossmatch (FCXM) technique. In a recent study, the sera of weakly FCXM-positive patients were diluted 1/50, and the FCXM test was repeated. The use of diluted serum eliminated the effect of the prozone so that the DSAs could be detected.

  16. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2006-02-01

    There are many fractured carbonate reservoirs in US (and the world) with light oil. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). The process of using dilute anionic surfactants in alkaline solutions has been investigated in this work for oil recovery from fractured oil-wet carbonate reservoirs both experimentally and numerically. This process is a surfactant-aided gravity drainage where surfactant diffuses into the matrix, lowers IFT and contact angle, which decrease capillary pressure and increase oil relative permeability enabling gravity to drain the oil up. Anionic surfactants have been identified which at dilute concentration of 0.05 wt% and optimal salinity can lower the interfacial tension and change the wettability of the calcite surface to intermediate/water-wet condition as well or better than the cationic surfactant DTAB with a West Texas crude oil. The force of adhesion in AFM of oil-wet regions changes after anionic surfactant treatment to values similar to those of water-wet regions. The AFM topography images showed that the oil-wetting material was removed from the surface by the anionic surfactant treatment. Adsorption studies indicate that the extent of adsorption for anionic surfactants on calcite minerals decreases with increase in pH and with decrease in salinity. Surfactant adsorption can be minimized in the presence of Na{sub 2}CO{sub 3}. Laboratory-scale surfactant brine imbibition experiments give high oil recovery (20-42% OOIP in 50 days; up to 60% in 200 days) for initially oil-wet cores through wettability alteration and IFT reduction. Small (<10%) initial gas saturation does not affect significantly the rate of oil recovery in the imbibition process, but larger gas saturation decreases the oil recovery rate. As the core permeability decreases, the rate of oil recovery reduces

  17. Preparation and characterization of agar-based nanocomposite films reinforced with bimetallic (Ag-Cu) alloy nanoparticles.

    PubMed

    Arfat, Yasir Ali; Ahmed, Jasim; Jacob, Harsha

    2017-01-02

    Agar-based active nanocomposite films were prepared by incorporating silver-copper (Ag-Cu) alloy nanoparticles (NPs) (0.5-4wt%) into glycerol plasticized agar solution. Thermo-mechanical, morphological, structural, and optical properties of the nanocomposite films were characterized by texture analyzer, differential scanning calorimetry (DSC), scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transforms infrared (FTIR) spectroscopy, and surface color measurement. Tensile strength and the melting temperature of the film increased linearly with NPs loading concentration. Color, transparency and UV barrier properties of agar films were influenced by the reinforcement of Ag-Cu NPs. XRD analysis confirmed the crystalline structure of the Agar/Ag-Cu nanocomposite films, whereas the smoothness and the homogeneity of film surface strongly reduced as observed through the SEM. The nanocomposite films exhibited a profound antibacterial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Salmonella enterica sv typhimurium) bacteria. Overall, the agar nanocomposite films could be used as packaging material for food preservation by controlling foodborne pathogens and spoilage bacteria.

  18. Infrared thermography analysis of thermal diffusion induced by RF magnetic field on agar phantoms loaded with magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Bante-Guerra, Jose; Macías, J. D.; Caballero-Aguilar, L.; Vales-Pinzón, C.; Alvarado-Gil, J. J.

    2013-02-01

    Recently, several treatments for fighting malignant tumors have been designed. However these procedures have well known inconveniences, depending on their applicability, tumor size and side effects, among others. Magnetic hyperthermia is a safe, non-invasive method for cancer therapy. This treatment is applied via elevation of target tissue temperature by dissipation of heat from Magnetic Nanoparticles (MNPs), previously located within the tumor. The induction of heat causes cell death and therefore the removal of the tumor. In this work the thermal diffusion in phantoms of agar loaded with magnetic nanoparticles (MNPs) is studied using the infrared thermography technique, which is widely used in biology/medicine (e.g. skin temperature mapping). Agar is one of the materials used to simulate different types of body tissues, these samples are known as "phantoms". Agar is of natural origin, low cost and high degree of biocompatibility. In this work the agar gel was embedded with MNPs by coprecipitation and placed in an alternating magnetic field radiation. As a consequence, the energy from the radiation source is dissipated as heat and then transferred from the MNP to the gel, increasing its temperature. For the temperature analysis, the samples of agar gel were stimulated by RF magnetic field generated by coils. Heating was measured with infrared thermography using a Thermovision A20M infrared camera. Thermographic images allowed obtaining the dependence of thermal diffusion in the phantom as a function of the magnitude of the applied RF magnetic field and the load of magnetic particles.

  19. Agar extraction from integrated multitrophic aquacultured Gracilaria vermiculophylla: evaluation of a microwave-assisted process using response surface methodology.

    PubMed

    Sousa, A M M; Alves, V D; Morais, S; Delerue-Matos, C; Gonçalves, M P

    2010-05-01

    Microwave-assisted extraction (MAE) of agar from Gracilaria vermiculophylla, produced in an integrated multitrophic aquaculture (IMTA) system, from Ria de Aveiro (northwestern Portugal), was tested and optimized using response surface methodology. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the physical and chemical properties of agar (yield, gel strength, gelling and melting temperatures, as well as, sulphate and 3,6-anhydro-L-galactose contents) was evaluated in a 2(4) orthogonal composite design. The quality of the extracted agar compared favorably with the attained using traditional extraction (2 h at 85 degrees Celsius) while reducing drastically extraction time, solvent consumption and waste disposal requirements. Agar MAE optimum results were: an yield of 14.4 + or - 0.4%, a gel strength of 1331 + or - 51 g/cm(2), 40.7 + or - 0.2 degrees Celsius gelling temperature, 93.1 + or - 0.5 degrees Celsius melting temperature, 1.73 + or - 0.13% sulfate content and 39.4 + or - 0.3% 3,6-anhydro-L-galactose content. Furthermore, this study suggests the feasibility of the exploitation of G. vermiculophylla grew in IMTA systems for agar production.

  20. Evaluation of Albicans ID2 and Biggy agar for the isolation and direct identification of vaginal yeast isolates.

    PubMed

    Ilkit, Macit; Hilmioglu, Suleyha; Tasbakan, Meltem; Aydemir, Sohret

    2007-06-01

    In this study, 250 vaginal samples from patients with vulvovaginal candidosis were inoculated onto two chromogenic media, Albicans ID(2) and Biggy agar, as well as onto Sabouraud chloramphenicol agar, yielding a total of 63 yeast (25.2 %) on all three media. These strains were identified as Candida glabrata in 20 (31.8 %) samples, Candida albicans in 15 samples (23.8 %), Candida tropicalis in 10 samples (15.9 %), Candida krusei in five samples (7.9 %), Candida kefyr in five samples (7.9 %), Candida dubliniensis in four samples (6.3 %), Candida parapsilosis in two samples (3.2 %) and Candida guilliermondii in two samples (3.2 %). Mixed fungal cultures and bacterial growth or filamentous fungi were not detected on any of the selected media. The sensitivity and specificity of the Albicans ID(2) and Biggy agar with regard to the identification of C. albicans were 80.0 and 64.6 %, and 86.7 and 56.3 %, respectively. This study showed these two chromogenic media to be as effective as Sabouraud chloramphenicol agar with respect to fungal detection. However, neither Albicans ID(2) nor Biggy agar was sufficient for reliable differentiation of yeasts to the species level.

  1. Comparison of Mast Burkholderia Cepacia, Ashdown + Gentamicin, and Burkholderia Pseudomallei Selective Agar for the Selective Growth of Burkholderia Spp.

    PubMed

    Edler, Carola; Derschum, Henri; Köhler, Mirko; Neubauer, Heinrich; Frickmann, Hagen; Hagen, Ralf Matthias

    2017-03-01

    Reliable identification of pathogenic Burkholderia spp. like Burkholderia mallei and Burkholderia pseudomallei in clinical samples is desirable. Three different selective media were assessed for reliability and selectivity with various Burkholderia spp. and nontarget organisms. Mast Burkholderia cepacia agar, Ashdown + gentamicin agar, and B. pseudomallei selective agar were compared. A panel of 116 reference strains and well-characterized clinical isolates, comprising 30 B. pseudomallei, 20 B. mallei, 18 other Burkholderia spp., and 48 nontarget organisms, was used for this assessment. While all B. pseudomallei strains grew on all three tested selective agars, the other Burkholderia spp. showed a diverse growth pattern. Nontarget organisms, i.e., nonfermentative rod-shaped bacteria, other species, and yeasts, grew on all selective agars. Colony morphology did not allow unambiguous discrimination. While the assessed selective media reliably allowed the growth of a wide range of B. pseudomallei strains, growth of other Burkholderia spp. is only partially ensured. Growth of various nontarget organisms has to be considered. Therefore, the assessed media can only be used in combination with other confirmative tests in the diagnostic procedure for the screening for melioidosis or glanders.

  2. Isolation and characterization of agar-digesting Vibrio species from the rotten thallus of Gracilariopsis heteroclada Zhang et Xia.

    PubMed

    Martinez, Joval N; Padilla, Philip Ian P

    2016-08-01

    Gracilariopsis heteroclada Zhang et Xia (Gracilariaceae, Rhodophyta) is one of the most studied marine seaweeds due to its economic importance. This has been cultivated extensively on commercial scale in the Philippines and other Asian countries. However, sustainable production of G. heteroclada in the Philippines could not be maximized due to the occurrence of rotten thallus disease. Thus, isolation and characterization of agar-digesting bacteria from the rotten thalli of G. heteroclada was conducted. A total of seven representative bacterial isolates were randomly selected based on their ability to digest agar as evidenced by the formation of depressions around the bacterial colonies on nutrient agar plates supplemented with 1.5% NaCl and liquefaction of agar. Gram-staining and biochemical characterization revealed that isolates tested were gram-negative rods and taxonomically identified as Vibrio parahaemolyticus (86-99.5%) and Vibrio alginolyticus (94.2-97.7%), respectively. It is yet to be confirmed whether these agar-digesting vibrios are involved in the induction and development of rotten thallus disease in G. heteroclada in concomitance with other opportunistic bacterial pathogens coupled with adverse environmental conditions.

  3. Comparison of Mast Burkholderia Cepacia, Ashdown + Gentamicin, and Burkholderia Pseudomallei Selective Agar for the Selective Growth of Burkholderia Spp.

    PubMed Central

    Edler, Carola; Derschum, Henri; Köhler, Mirko; Neubauer, Heinrich; Frickmann, Hagen; Hagen, Ralf Matthias

    2017-01-01

    Reliable identification of pathogenic Burkholderia spp. like Burkholderia mallei and Burkholderia pseudomallei in clinical samples is desirable. Three different selective media were assessed for reliability and selectivity with various Burkholderia spp. and nontarget organisms. Mast Burkholderia cepacia agar, Ashdown + gentamicin agar, and B. pseudomallei selective agar were compared. A panel of 116 reference strains and well-characterized clinical isolates, comprising 30 B. pseudomallei, 20 B. mallei, 18 other Burkholderia spp., and 48 nontarget organisms, was used for this assessment. While all B. pseudomallei strains grew on all three tested selective agars, the other Burkholderia spp. showed a diverse growth pattern. Nontarget organisms, i.e., nonfermentative rod-shaped bacteria, other species, and yeasts, grew on all selective agars. Colony morphology did not allow unambiguous discrimination. While the assessed selective media reliably allowed the growth of a wide range of B. pseudomallei strains, growth of other Burkholderia spp. is only partially ensured. Growth of various nontarget organisms has to be considered. Therefore, the assessed media can only be used in combination with other confirmative tests in the diagnostic procedure for the screening for melioidosis or glanders. PMID:28386468

  4. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K [Pleasanton, CA; Snyderman, Neal J [Berkeley, CA; Rowland, Mark S [Alamo, CA

    2012-05-15

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  5. Absolute nuclear material assay

    DOEpatents

    Prasad, Manoj K.; Snyderman, Neal J.; Rowland, Mark S.

    2010-07-13

    A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

  6. Visualization of Thermal Distribution Caused by Focused Ultrasound Field in an Agar Phantom

    NASA Astrophysics Data System (ADS)

    Kim, Jungsoon; Kim, Moojoon; Ha, Kanglyeol

    2011-07-01

    Ultrasound waves have been widely used not only in medical diagnostic systems but also in medical treatment. There has been increasing interest in the thermal distribution caused by ultrasound waves. In this study, using thermochromic particles, a visualization method was suggested in a mimic phantom for organic materials. By blending various thermochromic particles with different critical temperatures, the thermal field distribution in the phantom could be observed. The effect of a concave-type ultrasound transducer on the temperature distribution in an agar phantom mixed with thermochromic particles was observed. The temperature distribution corresponded to changes in the brightness distribution of gray. It was confirmed that the thermal distribution pattern in the vicinity of the focal area varies with the time exposure to ultrasound waves.

  7. Copper removal by algae Gelidium, agar extraction algal waste and granulated algal waste: kinetics and equilibrium.

    PubMed

    Vilar, Vítor J P; Botelho, Cidália M S; Boaventura, Rui A R

    2008-03-01

    Biosorption of copper ions by an industrial algal waste, from agar extraction industry has been studied in a batch system. This biosorbent was compared with the algae Gelidium itself, which is the raw material for agar extraction, and the industrial waste immobilized with polyacrylonitrile (composite material). The effects of contact time, pH, ionic strength (IS) and temperature on the biosorption process have been studied. Equilibrium data follow both Langmuir and Langmuir-Freundlich models. The parameters of Langmuir equilibrium model were: q(max)=33.0mgg(-1), K(L)=0.015mgl(-1); q(max)=16.7mgg(-1), K(L)=0.028mgl(-1) and q(max)=10.3mgg(-1), K(L)=0.160mgl(-1) respectively for Gelidium, algal waste and composite material at pH=5.3, T=20 degrees C and IS=0.001M. Increasing the pH, the number of deprotonated active sites increases and so the uptake capacity of copper ions. In the case of high ionic strengths, the contribution of the electrostatic component to the overall binding decreases, and so the uptake capacity. The temperature has little influence on the uptake capacity principally for low equilibrium copper concentrations. Changes in standard enthalpy, Gibbs energy and entropy during biosorption were determined. Kinetic data at different solution pH (3, 4 and 5.3) were fitted to pseudo-first-order and pseudo-second-order models. The adsorptive behaviour of biosorbent particles was modelled using a batch reactor mass transfer kinetic model, which successfully predicts Cu(II) concentration profiles.

  8. Genotoxicity Assessment of Perfluorodecanoic Acid Using a Battery of In Vitro and In Vivo/in Vitro Assays.

    DTIC Science & Technology

    1990-12-01

    hepatic catalase and carnitine acetyltransferase activities in rats and mice. Life Sce. 18:941-946. Reddy, J.K., D.L. Azarnoff, and C.E. Hignite. 1980...the mutagenicity assay, the top agar was melted and supplemented with a sterile solution containing 0.5 mM L-histidine and 0.5 mM D-biotin (10% v/v...Minimal Bottom Agari The bottom agar was Vogel-Bonner minimal medium E (Vogel and Bonner, 1956), supplemented with 0.2% (w/v) glucose. Nutrient Broth

  9. Decomposition of dilute trichloroethylene by nonthermal plasma

    SciTech Connect

    Oda, Tetsuji; Takahashi, Tadashi; Tada, Keiko

    1999-03-01

    Decomposition performance of a dilute toxic organic compound, trichloroethylene (TCE), in air by using nonthermal plasma processing was studied extensively. The nonthermal plasma was generated by the high-frequency (2 kHz) or commercial-frequency (50 Hz) barrier discharge in a fused silica tube. Three types of reactors, bolt type, rod type (both are barrier-discharge type), and coil type (surface-discharge type), were tested. Analysis of byproducts, residual materials, and end products generated by the plasma process was performed by a gas chromatography mass spectrometer of gas chromatography. Most organic byproducts decrease with an increase of the electric discharge power, but only toxic phosgene increases with the increase of the discharge power. As a post process, NaOH solution was used to test effluent from the plasma reactor. The solution was found effective in phosgene absorption. Comparison between nonthermal plasma and UV irradiation for TCE decomposition was also made. In regard to the energy efficiency of the TCE decomposition, UV irradiation is found much better than discharge plasma.

  10. Chain Dynamics in a Dilute Magnetorheological Fluid

    NASA Technical Reports Server (NTRS)

    Liu, Jing; Hagenbuchle, Martin

    1996-01-01

    The structure, formation, and dynamics of dilute, mono-dispersive ferrofluid emulsions in an external magnetic field have been investigated using dynamic light scattering techniques. In the absence of the magnetic field, the emulsion particles are randomly distributed and behave like hard spheres in Brownian motion. An applied magnetic field induces a magnetic dipole moment in each particle. Dipolar interactions between particles align them into chains where correlation functions show two decay processes. The short-time decay shows the motion of straight chains as a whole where the apparent chain length increases with the applied magnetic field and the particle volume fraction. Good scaling results are obtained showing that the apparent chain length grows with time following a power law with exponent of 0.6 and depends on the applied field, particle volume fraction, and diffusion constant of the particles. The long-time decay in the correlation function shows oscillation when the chains reach a certain length with time and stiffness with threshold field This result shows that chains not only fluctuate, but move in a periodic motion with a frequency of 364 Hz at lambda = 15. It may suggest the existence of phonons. This work is the first step in the understanding of the structure formation, especially chain coarsening mechanism, of magnetorheological (MR) fluids at higher volume fractions.

  11. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2004-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Simulation studies indicate that both wettability alteration and gravity-driven flow play significant role in oil recovery from fractured carbonates. Anionic surfactants (Alfoterra 35, 38) recover about 55% of the oil in about 150 days by imbibition driven by wettability alteration and low tension in the core-scale. Anionic surfactant, Alfoterra-68, recovers about 40% of the oil by lower tension aided gravity-driven imbibition in the core-scale. Cationic surfactant, DTAB recovers about 35% of the oil. Plans for the next quarter include conducting simulation and imbibition studies.

  12. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior, interfacial tension (IFT) and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases IFT with a minimum at about 0.2 M. Addition of surfactant decreases IFT further. In the absence of surfactant the minerals are oil-wet after aging with crude oil. Addition of surfactant solution decreases the contact angle to intermediate-wet for many surfactants and water-wet for one surfactant. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Plans for the next quarter include conducting core adsorption, phase behavior, wettability and mobilization studies.

  13. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2005-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the best hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory-scale surfactant brine imbibition experiments give high oil recovery (35-62% OOIP) for initially oil-wet cores through wettability alteration and IFT reduction. Core-scale simulation results match those of the experiments. Initial capillarity-driven imbibition gives way to a final gravity-driven process. As the matrix block height increases, surfactant alters wettability to a lesser degree, or permeability decreases, oil production rate decreases. The scale-up to field scale will be further studied in the next quarter.

  14. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-10-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior, interfacial tension (IFT) and wettability studies. Alfoterra-38 (0.05 wt%), Alfoterra-35 (0.05 wt%), SS-6656 (0.05 wt%), and DTAB (1 wt%) altered the wettability of the initially oil-wet calcite plate to an intermediate/water-wet state. Low IFT ({approx}10{sup -3} dynes/cm) is obtained with surfactants 5-166, Alfoterra-33 and Alfoterra-38. Plans for the next quarter include conducting wettability and mobilization studies.

  15. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Imbibition in an originally oil-wet 2D capillary is the fastest in the case of Alf-38 and slowest in the case of DTAB (among the surfactants studied). Force of adhesion studies and contact angle measurements show that greater wettability alteration is possible with these anionic surfactants than the cationic surfactant studied. The water imbibition rate does not increase monotonically with an increase in the surfactant concentration. A numerical model has been developed that fits the rate of imbibition. Plans for the next quarter include conducting simulation and imbibition studies.

  16. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-04-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory imbibition tests show about 61% oil recovery in the case of Alf-38 and 37% in the case of DTAB. A numerical model has been developed that fits the rate of imbibition of the laboratory experiment. Field-scale fracture block simulation shows that as the fracture spacing increases, so does the time of recovery. Plans for the next quarter include simulation studies.

  17. Dilute Surfactant Methods for Carbonate Formations

    SciTech Connect

    Kishore K. Mohanty

    2004-03-31

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Anionic surfactants (Alfoterra 35, 38) recover more than 40% of the oil in about 50 days by imbibition driven by wettability alteration in the core-scale. Anionic surfactant, Alfoterra-68, recovers about 28% of the oil by lower tension aided gravity-driven imbibition in the core-scale. Residual oil saturation showed little capillary number dependence between 10{sup -5} and 10{sup -2}. Wettability alteration increases as the number of ethoxy groups increases in ethoxy sulfate surfactants. Plans for the next quarter include conducting mobilization, and imbibition studies.

  18. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have conducted adsorption, phase behavior and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases IFT with a minimum at about 0.2 M. Addition of surfactant decreases IFT further. In the absence of surfactant the minerals are oil wet after aging with crude oil. Addition of surfactant solution decreases the contact angle to intermediate wettability. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Plans for the next quarter include conducting adsorption, phase behavior and wettability studies.

  19. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2003-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. We have acquired field oil and core samples and field brine compositions from Marathon. We have conducted preliminary adsorption and wettability studies. Addition of Na{sub 2}CO{sub 3} decreases anionic surfactant adsorption on calcite surface. Receding contact angles increase with surfactant adsorption. Plans for the next quarter include conducting adsorption, phase behavior and wettability studies.

  20. Dilute ferromagnetic semiconductors: Physics and spintronic structures

    NASA Astrophysics Data System (ADS)

    Dietl, Tomasz; Ohno, Hideo

    2014-01-01

    This review compiles results of experimental and theoretical studies on thin films and quantum structures of semiconductors with randomly distributed Mn ions, which exhibit spintronic functionalities associated with collective ferromagnetic spin ordering. Properties of p-type Mn-containing III-V as well as II-VI, IV-VI, V2-VI3, I-II-V, and elemental group IV semiconductors are described, paying particular attention to the most thoroughly investigated system (Ga,Mn)As that supports the hole-mediated ferromagnetic order up to 190 K for the net concentration of Mn spins below 10%. Multilayer structures showing efficient spin injection and spin-related magnetotransport properties as well as enabling magnetization manipulation by strain, light, electric fields, and spin currents are presented together with their impact on metal spintronics. The challenging interplay between magnetic and electronic properties in topologically trivial and nontrivial systems is described, emphasizing the entangled roles of disorder and correlation at the carrier localization boundary. Finally, the case of dilute magnetic insulators is considered, such as (Ga,Mn)N, where low-temperature spin ordering is driven by short-ranged superexchange that is ferromagnetic for certain charge states of magnetic impurities.

  1. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2005-07-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Laboratory imbibition tests show that imbibition rate is not very sensitive to the surfactant concentration (in the range of 0.05-0.2 wt%) and small amounts of trapped gas saturation. It is however very sensitive to oil permeability and water-oil-ratio. Less than 0.5 M Na2CO3 is needed for in situ soap generation and low adsorption; NaCl can be added to reach the necessary total salinity. The simulation result matches the laboratory imbibition experimental data. Small fracture spacing and high permeability would be needed for high rate of recovery.

  2. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    SciTech Connect

    Kishore K. Mohanty

    2004-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Anionic surfactants (SS-6656, Alfoterra 35, 38, 63,65,68) have been identified which can change the wettability of the calcite surface to intermediate/water-wet condition as well or better than the cationic surfactant DTAB with a West Texas crude oil in the presence of Na{sub 2}CO{sub 3}. All the carbonate surfaces (Lithographic Limestone, Marble, Dolomite and Calcite) show similar behavior with respect to wettability alteration with surfactant 4-22. Anionic surfactants (5-166, Alfoterra-33 and Alfoterra-38 and Alfoterra-68), which lower the interfacial tension with a West Texas crude oil to very low values (<10{sup -2} nM/m), have also been identified. Plans for the next quarter include conducting wettability, mobilization, and imbibition studies.

  3. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  4. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  5. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  6. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Dilution air background...

  7. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Dilution air background...

  8. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Dilution air background...

  9. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Dilution air background...

  10. 40 CFR 1065.667 - Dilution air background emission correction.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Dilution air background...

  11. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  12. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Automated blood cell diluting apparatus. 864.5240 Section 864.5240 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell...

  13. Inhibition of Aspergillus flavus on agar media and brown rice cereal bars using cold atmospheric plasma treatment.

    PubMed

    Suhem, Kitiya; Matan, Narumol; Nisoa, Mudtorlep; Matan, Nirundorn

    2013-02-01

    This study aimed to optimize the operating parameters of cold atmospheric plasma treatment to inhibit the growth of Aspergillus flavus on agar media and brown rice cereal bars. The effects of argon plasma jet treatment on the growth of A. flavus on malt extract agar (MEA) at powers of 20 W and 40 W with exposure times at 5, 15 and 25 min were studied using response surface methodology (RSM) with a central composite face-centered (CCF) design. Multiple regression analysis indicated that plasma treatment at 40 W for 25 min is most effective for inhibiting growth of A. flavus on the agar medium. On brown rice cereal bars, plasma powered at 40 W for 20 min was capable of giving protection against A. flavus growth for up to 20 days under storage conditions of 25°C and 100% RH. These results demonstrated the potential of cold atmospheric plasma jet treatment to control mold growth on various food products.

  14. Microcoupon Assay Of Adhesion And Growth Of Bacterial Films

    NASA Technical Reports Server (NTRS)

    Pierson, Duane L.; Koenig, David W.

    1994-01-01

    Microbiological assay technique facilitates determination of some characteristics of sessile bacteria like those that attach to and coat interior walls of water-purification systems. Biofilms cause sickness and interfere with purification process. Technique enables direct measurement of rate of attachment of bacterial cells, their metabolism, and effects of chemicals on them. Used to quantify effects of both bactericides and growth-stimulating agents and in place of older standard plate-count and tube-dilution techniques.

  15. Efficacy comparison between simple mixed-dilution and simple mid-dilution on-line hemodiafiltration techniques: a crossover study.

    PubMed

    Susantitaphong, Paweena; Tiranathanagul, Khajohn; Katavetin, Pisut; Hanwiwatwong, Orawadee; Wittayalertpanya, Supeecha; Praditpornsilpa, Kearkiat; Tungsanga, Kriang; Eiam-Ong, Somchai

    2012-12-01

    Mid-dilution and mixed-dilution on-line hemodiafiltration (OL-HDF) techniques are innovated to overcome the limitations of two standard techniques including predilution and postdilution. Unfortunately, the head-to-head comparisons between these two novel techniques in the same study are still limited. Moreover, the original mid-dilution and mixed-dilution OL-HDF need special dialyzers and special machines. In the present study, simple mid-dilution and simple mixed-dilution OL-HDF were settled with the aim for clinical use in general hemodialysis (HD) centers. The efficacies of uremic toxins removal between both modalities were measured and compared. This prospective randomized crossover study was conducted on 12 stable HD patients undergoing simple mixed-dilution and simple mid-dilution OL-HDF techniques. HD prescriptions were similar in both techniques. The dialysis efficacies were determined by calculating small- (urea, creatinine, and phosphate) and middle-molecule (beta-2 microglobulin [β2M]) removal. Moreover, potential complications such as high transmembrane pressure (TMP) and protein loss were also observed. Simple mixed-dilution OL-HDF provided significantly greater clearances of urea, creatinine, and β2M when compared with the simple mid-dilution OL-HDF techniques. Phosphate clearances in both techniques were comparable. In addition, TMP and dialysate albumin loss were not different. There were no intradialytic complications in both techniques. Simple mixed-dilution OL-HDF could provide greater efficacy for small- and middle-molecule clearances and acceptable potential risks, while phosphate removal is comparable.

  16. Detection of Aspergillus-specific antibodies by agar gel double immunodiffusion and IgG ELISA in feline upper respiratory tract aspergillosis.

    PubMed

    Barrs, V R; Ujvari, B; Dhand, N K; Peters, I R; Talbot, J; Johnson, L R; Billen, F; Martin, P; Beatty, J A; Belov, K

    2015-03-01

    Feline upper respiratory tract aspergillosis (URTA) is an emerging infectious disease. The aims of this study were: (1) to assess the diagnostic value of detection of Aspergillus-specific antibodies using an agar gel double immunodiffusion (AGID) assay and an indirect immunoglobulin G (IgG) ELISA; and (2) to determine if an aspergillin derived from mycelia of Aspergillus fumigatus, Aspergillus niger and Aspergillus flavus can be used to detect serum antibodies against cryptic Aspergillus spp. in Aspergillus section Fumigati. Sera from cats with URTA (group 1: n = 21) and two control groups (group 2: cats with other upper respiratory tract diseases, n = 25; group 3: healthy cats and cats with non-respiratory, non-fungal illness, n = 84) were tested. Isolates from cats with URTA comprised A. fumigatus (n = 5), A. flavus (n = 1) and four cryptic species: Aspergillus felis (n = 12), Aspergillus thermomutatus (Neosartorya pseudofischeri, n = 1), Aspergillus lentulus (n = 1) and Aspergillus udagawae (n = 1). Brachycephalic purebred cats were significantly more likely to develop URTA than other breeds (P = 0.013). The sensitivity (Se) of the AGID was 43% and the specificity (Sp) was 100%. At a cut-off value of 6 ELISA units/mL, the Se of the IgG ELISA was 95.2% and the Sp was 92% and 92.9% for groups 2 and 3 cats, respectively. Aspergillus-specific antibodies against all four cryptic species were detected in one or both assays. Assay Se was not associated with species identity. Detection of Aspergillus-specific antibodies by IgG ELISA has high Se and Sp for diagnosis of feline URTA.

  17. Criteria for the interpretation of the pipemidic acid agar diffusion test by the Kirby-Bauer method.

    PubMed

    Grimm, H

    1983-01-01

    The antibiotic sensitivity of 296 strains of Pseudomonas aeruginosa and 294 isolates of other species was measured by the agar diffusion test with 20 micrograms pipemidic acid (Deblaston) discs on Mueller-Hinton agar by the Kirby-Bauer method. The correlation between inhibition zone diameter and minimal inhibitory concentration was worked out by regression analysis. In all bacterial species investigated, an inhibition zone of 14 mm or more indicates sensitivity to pipemidic acid. For Pseudomonas aeruginosa an intermediate zone of 11 to 13 mm is recommended.

  18. Highly Sensitive Protein Translation Assay for Trichothecene Toxicity in Airborne Particulates: Comparison with Cytotoxicity Assays

    PubMed Central

    Yike, Iwona; Allan, Terry; Sorenson, William G.; Dearborn, Dorr G.

    1999-01-01

    Screening assays for environmental mycotoxins in bulk samples currently use cytotoxicity in cell cultures, but their application to air particulate samples often lacks sensitivity and specificity for fungal spores. An assay based on inhibition of protein synthesis using translation of firefly luciferase in a rabbit reticulocyte system has been developed for the detection of trichothecene mycotoxins found in the spores of toxigenic fungi. Ethanol extracts of air particulates trapped on polycarbonate filters are ultrafiltered and applied at several dilutions to a translation reaction mixture. The activity of translated luciferase is measured directly in a luminometer, eliminating the need for radioisotopes and time-consuming sample processing. Parallel standard curves using a commercially available trichothecene provide for expression of the results in T-2 toxin equivalents per cubic meter of air. The assay can be completed in 2 h and is readily applicable to multiple samples. Comparison to the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cytotoxicity assay indicates a 400-fold increase in sensitivity of trichothecene detection in addition to a much higher specificity for these toxins. Initial field testing indicates a strong correlation between the measured level of toxicity and the presence of toxigenic fungi detected with microbiological methods. In conclusion, this luciferase translation assay offers a rapid and highly sensitive and specific method for quantitative detection of trichothecene mycotoxin activity in air particulate samples. PMID:9872764

  19. Dilute Oxygen Combustion Phase 2 Final Report

    SciTech Connect

    Ryan, H.M.; Riley, M.F.; Kobayashi, H.

    2005-09-30

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NOx) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NOx through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NOx production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature (~1366 K) oxidant (7-27% O2 vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d+ scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d+ scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW (~0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric arrangement, firing rate, and fuel injection velocity. NOx emissions

  20. Dilute oxygen combustion. Phase I report

    SciTech Connect

    1997-10-01

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NO{sub x}) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NO{sub x} through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NO{sub x} production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature ({approximately}1366 K) oxidant (7-27% O{sub 2} vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d{sup +} scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d{sup +} scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW ({approximately}0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric

  1. Dilute Oxygen Combustion Phase I Final Report

    SciTech Connect

    Ryan, H.M.; Riley, M.F.; Kobayashi, H.

    1997-10-31

    A novel burner, in which fuel (natural gas) and oxidant (oxygen or air) are separately injected into a furnace, shows promise for achieving very low nitrogen oxide(s) (NOx) emissions for commercial furnace applications. The dilute oxygen combustion (DOC) burner achieves very low NOx through in-furnace dilution of the oxidant stream prior to combustion, resulting in low flame temperatures, thus inhibiting thermal NOx production. The results of a fundamental and applied research effort on the development of the DOC burner are presented. In addition, the results of a market survey detailing the potential commercial impact of the DOC system are disclosed. The fundamental aspects of the burner development project involved examining the flame characteristics of a natural gas turbulent jet in a high-temperature (~1366 K) oxidant (7-27% O2 vol. wet). Specifically, the mass entrainment rate, the flame lift-off height, the velocity field and major species field of the jet were evaluated as a function of surrounding-gas temperature and composition. The measured entrainment rate of the fuel jet decreased with increasing oxygen content in the surrounding high-temperature oxidant, and was well represented by the d+ scaling correlation found in the literature. The measured flame lift-off height decreased with increasing oxygen content and increasing temperature of the surrounding gas. An increase in surrounding-gas oxygen content and/or temperature inhibited the velocity decay within the jet periphery as a function of axial distance as compared to isothermal turbulent jets. However, the velocity measurements were only broadly represented by the d+ scaling correlation. Several DOC burner configurations were tested in a laboratory-scale furnace at a nominal firing rate of 185 kW (~0.63 MMBtu/h). The flue gas composition was recorded as a function of furnace nitrogen content, furnace temperature, burner geometric arrangement, firing rate, and fuel injection velocity. NOx emissions

  2. Comparison of Y1 mouse adrenal cell and coagglutination assays for detection of Escherichia coli heat labile enterotoxin.

    PubMed Central

    Chapman, P A; Daly, C M

    1989-01-01

    A commercial coagglutination assay (COA; Phadebact LT-ETEC) was compared with a Y1 mouse adrenal cell assay for detecting the heat labile enterotoxin of Escherichia coli. Of four different media evaluated for use with the COA, only one (modified blood agar) gave a positive result with all strains known to produce heat labile enterotoxin. With modified blood agar, the COA detected 74 (85%) of 87 such strains. Eighty six strains negative by cell culture assay were also negative by COA, and one strain positive by COA could not be confirmed by cell culture. The Phadebact LT-ETEC kit provides a simple, sensitive, and economical method for detecting E coli heat labile enterotoxin. PMID:2668342

  3. Screening of new bioactive materials from microbial extracts of soil microorganism (I). Antimicrobial activity from 200 samples using microdilution assay.

    PubMed

    Jung, S O; Kim, J; Chang, I M; Ryu, J C

    1998-06-01

    The microdilution assay recommended by NCCLS (National Committee for Clinical Laboratory Standards) is one of the standardized methods of antibiotic susceptibility test. This method has been widely used clinically to obtain MIC values of antibiotics on pathogenic microorganisms. It is more convenient, rapid and simple to test many samples than other test methods such as agar diffusion assay and broth macrodilution assay. The screening of antimicrobial agents from microbial extracts is too laborious in its process. Therefore, a number of screening methods having more simple procedure have been developed. In our laboratory, we applied microdilution assay for screening the antimicrobial agents. This assay showed dose-response results and was more sensitive than disc diffusion assay in our system. We tested 200 samples of microbial extracts originated from 100 microbial strains and selected several samples as potential candidates. In this report, we show that the microdilution assay is more convenient method in screening of antibiotic susceptibility than those previously reported.

  4. Enhancement by sodium chloride of the selectivity of thiosulfate citrate bile salts sucrose agar for isolating Vibrio cholerae biotype El Tor.

    PubMed Central

    Morris, G K; DeWitt, W E; Gangarosa, E J; McCormack, W M

    1976-01-01

    In this study we utilized the salt-tolerant characteristics of vibrios to develop a more selective medium by addition of NaCl to thiosulfate citrate bile salts sucrose (TCBS) agar. The effect of adding salt to TCBS agar varied greatly among brands of TCBS agar and between lots of the same brand. The addition of salt at concentrations as high as 1.5% (2.5% total NaCl) caused the inhibition of growth of three species of commonly encountered normal bowel flora and one strain of classical Vibrio cholerae but did not compromise the use of TCBS agar for isolation of V. cholerae biotype El Tor. PMID:965476

  5. Dynamics of atmospheres with a non-dilute condensible component.

    PubMed

    Pierrehumbert, Raymond T; Ding, Feng

    2016-06-01

    The diversity of characteristics for the host of recently discovered exoplanets opens up a great deal of fertile new territory for geophysical fluid dynamics, particularly when the fluid flow is coupled to novel thermodynamics, radiative transfer or chemistry. In this paper, we survey one of these new areas-the climate dynamics of atmospheres with a non-dilute condensible component, defined as the situation in which a condensible component of the atmosphere makes up a substantial fraction of the atmospheric mass within some layer. Non-dilute dynamics can occur for a wide range of condensibles, generically applying near both the inner and the outer edges of the conventional habitable zone and in connection with runaway greenhouse phenomena. It also applies in a wide variety of other planetary circumstances. We first present a number of analytical results developing some key features of non-dilute atmospheres, and then show how some of these features are manifest in simulations with a general circulation model adapted to handle non-dilute atmospheres. We find that non-dilute atmospheres have weak horizontal temperature gradients even for rapidly rotating planets, and that their circulations are largely barotropic. The relative humidity of the condensible component tends towards 100% as the atmosphere becomes more non-dilute, which has important implications for runaway greenhouse thresholds. Non-dilute atmospheres exhibit a number of interesting organized convection features, for which there is not yet any adequate theoretical understanding.

  6. Biodiversity inhibits parasites: Broad evidence for the dilution effect.

    PubMed

    Civitello, David J; Cohen, Jeremy; Fatima, Hiba; Halstead, Neal T; Liriano, Josue; McMahon, Taegan A; Ortega, C Nicole; Sauer, Erin Louise; Sehgal, Tanya; Young, Suzanne; Rohr, Jason R

    2015-07-14

    Infectious diseases of humans, wildlife, and domesticated species are increasing worldwide, driving the need to understand the mechanisms that shape outbreaks. Simultaneously, human activities are drastically reducing biodiversity. These concurrent patterns have prompted repeated suggestions that biodiversity and disease are linked. For example, the dilution effect hypothesis posits that these patterns are causally related; diverse host communities inhibit the spread of parasites via several mechanisms, such as by regulating populations of susceptible hosts or interfering with parasite transmission. However, the generality of the dilution effect hypothesis remains controversial, especially for zoonotic diseases of humans. Here we provide broad evidence that host diversity inhibits parasite abundance using a meta-analysis of 202 effect sizes on 61 parasite species. The magnitude of these effects was independent of host density, study design, and type and specialization of parasites, indicating that dilution was robust across all ecological contexts examined. However, the magnitude of dilution was more closely related to the frequency, rather than density, of focal host species. Importantly, observational studies overwhelmingly documented dilution effects, and there was also significant evidence for dilution effects of zoonotic parasites of humans. Thus, dilution effects occur commonly in nature, and they may modulate human disease risk. A second analysis identified similar effects of diversity in plant-herbivore systems. Thus, although there can be exceptions, our results indicate that biodiversity generally decreases parasitism and herbivory. Consequently, anthropogenic declines in biodiversity could increase human and wildlife diseases and decrease crop and forest production.

  7. Dynamics of atmospheres with a non-dilute condensible component

    NASA Astrophysics Data System (ADS)

    Pierrehumbert, Raymond T.; Ding, Feng

    2016-06-01

    The diversity of characteristics for the host of recently discovered exoplanets opens up a great deal of fertile new territory for geophysical fluid dynamics, particularly when the fluid flow is coupled to novel thermodynamics, radiative transfer or chemistry. In this paper, we survey one of these new areas-the climate dynamics of atmospheres with a non-dilute condensible component, defined as the situation in which a condensible component of the atmosphere makes up a substantial fraction of the atmospheric mass within some layer. Non-dilute dynamics can occur for a wide range of condensibles, generically applying near both the inner and the outer edges of the conventional habitable zone and in connection with runaway greenhouse phenomena. It also applies in a wide variety of other planetary circumstances. We first present a number of analytical results developing some key features of non-dilute atmospheres, and then show how some of these features are manifest in simulations with a general circulation model adapted to handle non-dilute atmospheres. We find that non-dilute atmospheres have weak horizontal temperature gradients even for rapidly rotating planets, and that their circulations are largely barotropic. The relative humidity of the condensible component tends towards 100% as the atmosphere becomes more non-dilute, which has important implications for runaway greenhouse thresholds. Non-dilute atmospheres exhibit a number of interesting organized convection features, for which there is not yet any adequate theoretical understanding.

  8. Use of diluted urine for cultivation of Chlorella vulgaris.

    PubMed

    Jaatinen, Sanna; Lakaniemi, Aino-Maija; Rintala, Jukka

    2016-01-01

    Our aim was to study the biomass growth of microalga Chlorella vulgaris using diluted human urine as a sole nutrient source. Batch cultivations (21 days) were conducted in five different urine dilutions (1:25-1:300), in 1:100-diluted urine as such and with added trace elements, and as a reference, in artificial growth medium. The highest biomass density was obtained in 1:100-diluted urine with and without additional trace elements (0.73 and 0.60 g L(-1), respectively). Similar biomass growth trends and densities were obtained with 1:25- and 1:300-diluted urine (0.52 vs. 0.48 gVSS L(-1)) indicating that urine at dilution 1:25 can be used to cultivate microalgal based biomass. Interestingly, even 1:300-diluted urine contained sufficiently nutrients and trace elements to support biomass growth. Biomass production was similar despite pH-variation from < 5 to 9 in different incubations indicating robustness of the biomass growth. Ammonium formation did not inhibit overall biomass growth. At the beginning of cultivation, the majority of the biomass consisted of living algal cells, while towards the end, their share decreased and the estimated share of bacteria and cell debris increased.

  9. Effects of immersion disinfection of agar-alginate combined impressions on the surface properties of stone casts.

    PubMed

    Iwasaki, Yukiko; Hiraguchi, Hisako; Iwasaki, Eriko; Yoneyama, Takayuki

    2016-01-01

    This study investigated the effects of disinfection of agar-alginate combined impressions on the surface properties of the resulting stone casts. Two brands of cartridge-form agar impression material and one alginate impression material were used. Agar-alginate combined impressions of smooth glass plates were prepared. The impressions were immersed in 0.55% ortho-phthalaldehyde solution or 0.5% sodium hypochlorite solution for 1, 3, 5 and 10 min. A stone cast made with an impression that had not been immersed was prepared as a control. The surface roughness (Ra) of the stone casts was measured, and the cast surfaces were observed by SEM. Immersion of agar-alginate combined impressions in 0.5% sodium hypochlorite solution for up to 10 min had no serious adverse effects on the surface properties of the stone casts. In contrast, even 1 min of immersion in 0.55% ortho-phthalaldehyde solution caused deterioration of the cast surface properties.

  10. Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the present paper, we test the suitability of Choline-Cl/urea (DES-U) and Choline-Cl/glycerol (DES-G) eutectic mixtures at 1:2 molar ratios for the production of agar biodegradable films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and s...

  11. Campylobacter in broiler slaughter samples assessed by direct count on mCCDA and Campy-Cefex agar.

    PubMed

    Gonsalves, Camila Cristina; Borsoi, Anderlise; Perdoncini, Gustavo; Rodrigues, Laura Beatriz; do Nascimento, Vladimir Pinheiro

    2016-01-01

    Campylobacter spp. cause foodborne illnesses in humans primarily through the consumption of contaminated chicken. The aim of this study was to evaluate the United States Department of Agriculture's (USDA) recommended methodology, protocol MLG 41.02, for the isolation, identification and direct plate counting of Campylobacter jejuni and C. coli samples from the broiler slaughtering process. A plating method using both mCCDA and Campy-Cefex agars is recommended to recover Campylobacter cells. It is also possible to use this method in different matrices (cloacal swabs and water samples). Cloacal swabs, samples from pre-chiller and post-chiller carcasses and samples of pre-chiller, chiller and direct supply water were collected each week for four weeks from the same flock at a slaughterhouse located in an abattoir in southern Brazil. Samples were analyzed to directly count Campylobacter spp., and the results showed a high frequency of Campylobacter spp. on Campy-Cefex agar. For the isolated species, 72% were identified as Campylobacter jejuni and 38% as Campylobacter coli. It was possible to count Campylobacter jejuni and Campylobacter coli from different samples, including the water supply samples, using the two-agar method. These results suggest that slaughterhouses can use direct counting methods with both agars and different matrices as a monitoring tool to assess the presence of Campylobacter bacteria in their products.

  12. Intelligent pH indicator film composed of agar/potato starch and anthocyanin extracts from purple sweet potato.

    PubMed

    Choi, Inyoung; Lee, Jun Young; Lacroix, Monique; Han, Jaejoon

    2017-03-01

    A new colorimetric pH indicator film was developed using agar, potato starch, and natural dyes extracted from purple sweet potato, Ipomoea batatas. Both agar and potato starch are solid matrices used to immobilize natural dyes, anthocyanins. The ultraviolet-visible (UV-vis) spectrum of anthocyanin extract solutions and agar/potato starch films with anthocyanins showed color variations to different pH values (pH 2.0-10.0). Fourier transform infrared (FT-IR) and UV-vis region spectra showed compatibility between agar, starch, and anthocyanin extracts. Color variations of pH indicator films were measured by a colorimeter after immersion in different pH buffers. An application test was conducted for potential use as a meat spoilage sensor. The pH indicator films showed pH changes and spoilage point of pork samples, changing from red to green. Therefore, the developed pH indicator films could be used as a diagnostic tool for the detection of food spoilage.

  13. [An observation on the histological structure of Oncomelania hupensis soft tissue by agar-paraffin double-embedding method].

    PubMed

    Tan, Ping; Zhang, Jie; Li, Qing; Yu, Zhi-jun

    2014-12-01

    In order to study the histological structure of Oncomelania hupensis soft tissue, the fixed soft tissues of O. hupensis were pre-embedded in the agar and made blocks, then dehydrated, transparentized, immersed in paraffin, sectioned, and stained with haematoxylin-eosin (HE). Permanent slides of O. hupensis soft tissue were obtained. The histological structure of soft tissues was clear under the microscope.

  14. Paraprotein interference with turbidimetric gentamicin assay

    PubMed Central

    Bassett, Kendra; Brown, Nigel

    2015-01-01

    Introduction Gentamicin due to its low level of resistance and rapid bactericidal activity is commonly used to treat gram-negative bacteria. However, due to its toxic effects it needs to be monitored. To date, no interference has been reported with gentamicin assays. Materials and methods A patient with leg cellulitis and sepsis received a single dose of gentamicin and a sample was sent for gentamicin analysis. The sample showed high blank absorbance readings on Beckman DxC800 and DC800 analysers with various dilutions. A second sample was received and analysed on a Roche Cobas system to obtain a result. A third sample was received 107 hours later with the same results and this sample was then analysed neat and post ethanol precipitation on all the turbidimetric assays available on the DxC800 analyser. Results The high blank absorbance was observed upon addition of the reactive reagents due to protein precipitation. Although not obvious from the patient protein results, it was shown the presence of high IgM paraprotein, 18.9 g/L (reference range 0.4-2.3 g/L) was the cause of precipitation, giving high blank readings. Of all the other turbidimetric assays, only vancomicin and valproate showed similar high blank absorbance readings. To be able to provide more rapid results it was shown ethanol could be used as a precipitant of proteins in both calibrators and patient samples with acceptable recovery. Conclusion IgM paraprotein was identified as the cause of interference with the gentamicin, vancomicin and valproate assays. Protein interference in these assays can be overcome by precipitation with ethanol. PMID:25672475

  15. Two-stage dilute acid prehydrolysis of biomass

    DOEpatents

    Grohmann, Karel; Torget, Robert W.

    1992-01-01

    A two-stage dilute acid prehydrolysis process on xylan containing hemicellulose in biomass is effected by: treating feedstock of hemicellulosic material comprising xylan that is slow hydrolyzable and xylan that is fast hydrolyzable under predetermined low temperature conditions with a dilute acid for a residence time sufficient to hydrolyze the fast hydrolyzable xylan to xylose; removing said xylose from said fast hydrolyzable xylan and leaving a residue; and treating said residue having a slow hydrolyzable xylan with a dilute acid under predetermined high temperature conditions for a residence time required to hydrolyze said slow hydrolyzable xylan to xylose.

  16. Dilute Oxygen Combustion Phase IV Final Report

    SciTech Connect

    Riley, M.F.

    2003-04-30

    Novel furnace designs based on Dilute Oxygen Combustion (DOC) technology were developed under subcontract by Techint Technologies, Coraopolis, PA, to fully exploit the energy and environmental capabilities of DOC technology and to provide a competitive offering for new furnace construction opportunities. Capital cost, fuel, oxygen and utility costs, NOx emissions, oxide scaling performance, and maintenance requirements were compared for five DOC-based designs and three conventional air5-fired designs using a 10-year net present value calculation. A furnace direct completely with DOC burners offers low capital cost, low fuel rate, and minimal NOx emissions. However, these benefits do not offset the cost of oxygen and a full DOC-fired furnace is projected to cost $1.30 per ton more to operate than a conventional air-fired furnace. The incremental cost of the improved NOx performance is roughly $6/lb NOx, compared with an estimated $3/lb. NOx for equ8pping a conventional furnace with selective catalytic reduction (SCCR) technology. A furnace fired with DOC burners in the heating zone and ambient temperature (cold) air-fired burners in the soak zone offers low capital cost with less oxygen consumption. However, the improvement in fuel rate is not as great as the full DOC-fired design, and the DOC-cold soak design is also projected to cost $1.30 per ton more to operate than a conventional air-fired furnace. The NOx improvement with the DOC-cold soak design is also not as great as the full DOC fired design, and the incremental cost of the improved NOx performance is nearly $9/lb NOx. These results indicate that a DOC-based furnace design will not be generally competitive with conventional technology for new furnace construction under current market conditions. Fuel prices of $7/MMBtu or oxygen prices of $23/ton are needed to make the DOC furnace economics favorable. Niche applications may exist, particularly where access to capital is limited or floor space limitations

  17. CPTAC Assay Portal: a repository of targeted proteomic assays

    SciTech Connect

    Whiteaker, Jeffrey R.; Halusa, Goran; Hoofnagle, Andrew N.; Sharma, Vagisha; MacLean, Brendan; Yan, Ping; Wrobel, John; Kennedy, Jacob; Mani, DR; Zimmerman, Lisa J.; Meyer, Matthew R.; Mesri, Mehdi; Rodriguez, Henry; Abbateillo, Susan E.; Boja, Emily; Carr, Steven A.; Chan, Daniel W.; Chen, Xian; Chen, Jing; Davies, Sherri; Ellis, Matthew; Fenyo, David; Hiltket, Tara; Ketchum, Karen; Kinsinger, Christopher; Kuhn, Eric; Liebler, Daniel; Lin, De; Liu, Tao; Loss, Michael; MacCoss, Michael; Qian, Weijun; Rivers, Robert; Rodland, Karin D.; Ruggles, Kelly; Scott, Mitchell; Smith, Richard D.; Thomas, Stefani N.; Townsend, Reid; Whiteley, Gordon; Wu, Chaochao; Zhang, Hui; Zhang, Zhen; Paulovich, Amanda G.

    2014-06-27

    To address these issues, the Clinical Proteomic Tumor Analysis Consortium (CPTAC) of the National Cancer Institute (NCI) has launched an Assay Portal (http://assays.cancer.gov) to serve as a public repository of well-characterized quantitative, MS-based, targeted proteomic assays. The purpose of the CPTAC Assay Portal is to facilitate widespread adoption of targeted MS assays by disseminating SOPs, reagents, and assay characterization data for highly characterized assays. A primary aim of the NCI-supported portal is to bring together clinicians or biologists and analytical chemists to answer hypothesis-driven questions using targeted, MS-based assays. Assay content is easily accessed through queries and filters, enabling investigators to find assays to proteins relevant to their areas of interest. Detailed characterization data are available for each assay, enabling researchers to evaluate assay performance prior to launching the assay in their own laboratory.

  18. Lateral flow assays

    PubMed Central

    Koczula, Katarzyna M.

    2016-01-01

    Lateral flow assays (LFAs) are the technology behind low-cost, simple, rapid and portable detection devices popular in biomedicine, agriculture, food and environmental sciences. This review presents an overview of the principle of the method and the critical components of the assay, focusing on lateral flow immunoassays. This type of assay has recently attracted considerable interest because of its potential to provide instantaneous diagnosis directly to patients. The range and interpretation of results and parameters used for evaluation of the assay will also be discussed. The main advantages and disadvantages of LFAs will be summarized and relevant future improvements to testing devices and strategies will be proposed. Finally, the major recent advances and future diagnostic applications in the LFA field will be explored. PMID:27365041

  19. Cell viability assays: introduction.

    PubMed

    Stoddart, Martin J

    2011-01-01

    The measurement of cell viability plays a fundamental role in all forms of cell culture. Sometimes it is the main purpose of the experiment, such as in toxicity assays. Alternatively, cell viability can be used to -correlate cell behaviour to cell number, providing a more accurate picture of, for example, anabolic -activity. There are wide arrays of cell viability methods which range from the most routine trypan blue dye exclusion assay to highly complex analysis of individual cells, such as using RAMAN microscopy. The cost, speed, and complexity of equipment required will all play a role in determining the assay used. This chapter aims to provide an overview of many of the assays available today.

  20. Tube-Forming Assays.

    PubMed

    Brown, Ryan M; Meah, Christopher J; Heath, Victoria L; Styles, Iain B; Bicknell, Roy

    2016-01-01

    Angiogenesis involves the generation of new blood vessels from the existing vasculature and is dependent on many growth factors and signaling events. In vivo angiogenesis is dynamic and complex, meaning assays are commonly utilized to explore specific targets for research into this area. Tube-forming assays offer an excellent overview of the molecular processes in angiogenesis. The Matrigel tube forming assay is a simple-to-implement but powerful tool for identifying biomolecules involved in angiogenesis. A detailed experimental protocol on the implementation of the assay is described in conjunction with an in-depth review of methods that can be applied to the analysis of the tube formation. In addition, an ImageJ plug-in is presented which allows automatic quantification of tube images reducing analysis times while removing user bias and subjectivity.

  1. Retroviral sequences located within an intron of the dilute gene alter dilute expression in a tissue-specific manner.

    PubMed Central

    Seperack, P K; Mercer, J A; Strobel, M C; Copeland, N G; Jenkins, N A

    1995-01-01

    The murine dilute coat color locus encodes an unconventional myosin heavy chain that is thought to be required for the elaboration or maintenance of dendrites or organelle transport in melanocytes and neurons. In previous studies we showed that the d mutation carried by many inbred strains of mice (now referred to as dilute viral, dv), is caused by the integration of an ecotropic murine leukemia virus (Emv-3) into the dilute gene and that phenotypic revertants of dv (termed d+) result from viral excision; a solo viral long terminal repeat (LTR) is all that remains in revertant DNA. In the studies described here we show that Emv-3 sequences are located within an intron of the dilute gene in a region of the C-terminal tail that is differentially spliced. We also show that these Emv-3 sequences result in the production of shortened and abnormally spliced dilute transcripts and that the level of this effect varies among tissues. This tissue-specific effect on dilute expression likely accounts for the absence of neurological abnormalities observed in dv mice. Surprisingly, we also found that the solo viral LTR present in revertant d+ DNA produces a tissue-specific effect on dilute expression, although this effect is less dramatic than with the full-length provirus and produces no obvious mutant phenotype. These findings have important implications for understanding the effects of viral sequences on mammalian gene expression. Images PMID:7774591

  2. Doped colorimetric assay liposomes

    DOEpatents

    Charych, Deborah; Stevens, Raymond C.

    2001-01-01

    The present invention provides compositions comprising colorimetric assay liposomes. The present invention also provides methods for producing colorimetric liposomes and calorimetric liposome assay systems. In preferred embodiments, these calorimetric liposome systems provide high levels of sensitivity through the use of dopant molecules. As these dopants allow the controlled destabilization of the liposome structure, upon exposure of the doped liposomes to analyte(s) of interest, the indicator color change is facilitated and more easily recognized.

  3. Multiple log potash assay

    NASA Astrophysics Data System (ADS)

    Hill, D. G.

    1993-10-01

    A five-mineral multiple-log potash assay technique has been successfully applied to evaluate potash-rich intervals in evaporite sequences. The technique is able to distinguish economic potash minerals from non-economic potash minerals and from other non-potash radioactive minerals. It can be applied on location, using a programmable calculator or microcomputer, providing near real-time logs of potash mineral concentrations. Log assay values show good agreement with core wet chemistry analyses.

  4. Thermal inactivation and sublethal injury kinetics of Salmonella enterica and Listeria monocytogenes in broth versus agar surface.

    PubMed

    Wang, Xiang; Devlieghere, Frank; Geeraerd, Annemie; Uyttendaele, Mieke

    2017-02-21

    The objective of the present study was to compare the thermal inactivation and sublethal injury kinetics of Salmonella enterica and Listeria monocytogenes in broth (suspended cells) and on solid surface (agar-seeded cells). A 3-strain cocktail of S. enterica or L. monocytogenes inoculated in broth or on agar was subjected to heating in a water bath at various set temperatures (55.0, 57.5 and 60.0°C for S. enterica and 60.0, 62.5 and 65°C for L. monocytogenes). The occurrence of sublethally injured cells was determined by comparing enumerations on nonselective (TSAYE) and selective (XLD or ALOA) media. Results showed that the inactivation curves obtained from selective media were log-linear, and significant shoulders (p<0.05) were observed on some of the inactivation curves from TSAYE media. The D-values derived from the total population were higher than those from the uninjured cells. Generally, cells on agar surface exhibited higher heat resistance than those in broth. For S. enterica, cell injury increased with the exposure time, no difference was observed when treated at temperatures from 55.0 to 60.0°C, while for L. monocytogenes, cell injury increased significantly with heating time and treatment temperature (from 60.0 to 65°C). Moreover, the degree of sublethal injury affected by thermal treatment in broth or on agar surface depended upon the target microorganism. Higher proportions of injured S. enterica cells were observed for treatment in broth than on agar surface, while the opposite was found for L. monocytogenes. The provided information may be used to assess the efficacy of thermal treatment processes on surfaces for inactivation of S. enterica and L. monocytogenes, and it provides insight into the sublethally injured survival state of S. enterica and L. monocytogenes treated in liquid or on solid food.

  5. Control of Drug Diffusion Behavior of Xanthan and Locust Bean Gum Gel by Agar Gel.

    PubMed

    Hishikawa, Yoshihiro; Kakino, Yukari; Tsukamoto, Hoshi; Tahara, Kohei; Onodera, Risako; Takeuchi, Hirofumi

    2016-01-01

    Oral gel formulations are known as easy to administer drug products for patients who have problems taking drugs including those with conditions such as dysphagia. In addition, there are numerous commercially available oral gel products, most of which are immediate-release formulation that release their pharmaceutical ingredient content by diffusion. This study is focused on developing oral gel formulations that reduce the dosing frequency and dosage compared to the conventional types. This is with the aim of facilitating the use of gel formulations for producing pharmaceutical agents with different dose regimens, thereby enhancing patient convenience. Here, we used naturally derived high-molecular-weight agar (Ag), xanthan gum (Xa), and locust bean gum (Lo) as gel bases to prepare a variety of gel membranes, and evaluated the diffusion coefficient of the model substances. The result revealed that the Ag content in the Xa-Lo combination gel concentration-dependently increased the diffusion coefficient. Moreover, these findings were applied in an attempt to mask the taste of intensely bitter levofloxacin. The results indicated that the Xa-Lo combination gel exhibited a significantly superior masking effect to that of the Ag gel. This study demonstrates the feasibility of using oral gel formulations to modulate the controlled-release functionality of pharmaceutical agents.

  6. Characterisation of Elastic and Acoustic Properties of an Agar-Based Tissue Mimicking Material.

    PubMed

    Brewin, M P; Birch, M J; Mehta, D J; Reeves, J W; Shaw, S; Kruse, C; Whiteman, J R; Hu, S; Kenz, Z R; Banks, H T; Greenwald, S E

    2015-10-01

    As a first step towards an acoustic localisation device for coronary stenosis to provide a non-invasive means of diagnosing arterial disease, measurements are reported for an agar-based tissue mimicking material (TMM) of the shear wave propagation velocity, attenuation and viscoelastic constants, together with one dimensional quasi-static elastic moduli and Poisson's ratio. Phase velocity and attenuation coefficients, determined by generating and detecting shear waves piezo-electrically in the range 300 Hz-2 kHz, were 3.2-7.5 ms(-1) and 320 dBm(-1). Quasi-static Young's modulus, shear modulus and Poisson's ratio, obtained by compressive or shear loading of cylindrical specimens were 150-160 kPa; 54-56 kPa and 0.37-0.44. The dynamic Young's and shear moduli, derived from fitting viscoelastic internal variables by an iterative statistical inverse solver to freely oscillating specimens were 230 and 33 kPa and the corresponding relaxation times, 0.046 and 0.036 s. The results were self-consistent, repeatable and provide baseline data required for the computational modelling of wave propagation in a phantom.

  7. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria)

    NASA Astrophysics Data System (ADS)

    Kupka, Teobald; Wieczorek, Piotr P.

    2016-01-01

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of 1H and 13C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs.

  8. A selective chromogenic agar that distinguishes Bacillus anthracis from Bacillus cereus and Bacillus thuringiensis.

    PubMed

    Juergensmeyer, Margaret A; Gingras, Bruce A; Restaino, Lawrence; Frampton, Elon W

    2006-08-01

    A selective and differential plating medium, R & F anthracis chromogenic agar (ACA), has been developed for isolating and identifying presumptive colonies of Bacillus anthracis. ACA contains the chromogenic substrate 5-bromo-4-chloro-3-indoxyl-choline phosphate that upon hydrolysis yields teal (blue green) colonies indicating the presence of phosphatidylcholine-specific phospholipase C (PC-PLC) activity. Among seven Bacillus species tested on ACA, only members of the Bacillus cereus group (B. anthracis, B. cereus, and B. thuringiensis) produced teal colonies (PC-PLC positive) having cream rings. Examination of colony morphology in 18 pure culture strains of B. anthracis (15 ATCC strains plus AMES-1-RIID, ANR-1, and AMED-RIID), with one exception, required 48 h at 35 to 37 degrees C for significant color production, whereas only 24 h was required for B. cereus and B. thuringiensis. This differential rate of PC-PLC synthesis in B. anthracis (due to the truncated plcR gene and PlcR regulator in B. anthracis) allowed for the rapid differentiation on ACA of presumptive colonies of B. anthracis from B. cereus and B. thuringiensis in both pure and mixed cultures. Effective recovery of B. anthracis from a variety of matrices having both high (soil and sewage) and low microbial backgrounds (cloth, paper, and blood) spiked with B. anthracis ANR-1 spores suggests the probable utility of ACA plating for B. anthracis recovery in a diversity of applications.

  9. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria).

    PubMed

    Kupka, Teobald; Wieczorek, Piotr P

    2016-01-15

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of (1)H and (13)C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs.

  10. Mercury and its bioconcentration factors in fly agaric (Amanita muscaria) from spatially distant sites in Poland.

    PubMed

    Falandysz, J; Lipka, K; Mazur, A

    2007-09-01

    Total mercury content has been determined in the fruiting bodies of fly agaric (Amanita muscaria) and topsoil layer (0-10 cm) collected from 14 spatially distant sites across Poland. Mercury was measured by cold-vapor atomic absorption spectroscopy (CV-AAS) after nitric acid (mushrooms) or nitric acid and sulfuric acid (soil) digestion of the samples. The caps, depending on the site, contained total mercury at mean concentrations from 0.24+/-0.13 to 1.4+/-0.6 microg/g dm (median 0.19-1.4 microg/g dm), and stalks from 0.18+/-0.06 to 0.71+/-0.26 microg/g dm (median 0.18-0.67 microg/g dm). An overall-mean the total mercury content for 204 caps and stalks was, respectively, 0.73+/-0.55 (0.05-3.3 microg/g dm) and 0.43+/-0.33 (0.09-2.3 microg/g dm).

  11. Comparison of CHROMagar Salmonella Medium and Hektoen Enteric Agar for Isolation of Salmonellae from Stool Samples

    PubMed Central

    Gaillot, Olivier; Di Camillo, Patrick; Berche, Patrick; Courcol, René; Savage, Colette

    1999-01-01

    CHROMagar Salmonella (CAS), a new chromogenic medium, was retrospectively compared to Hektoen enteric agar (HEA) with 501 Salmonella stock isolates and was then prospectively compared to HEA for the detection and presumptive identification of Salmonella spp. with 508 stool samples before and after enrichment. All stock cultures (100%), including cultures of H2S-negative isolates, yielded typical mauve colonies on CAS, while 497 (99%) isolates produced typical lactose-negative, black-centered colonies on HEA. Following overnight incubation at 37°C, a total of 20 Salmonella strains were isolated from the 508 clinical samples. Sensitivities for primary plating and after enrichment were 95% (19 isolates) and 100% (20 isolates), respectively, for CAS and 80% (16 isolates) and 100% (20 isolates), respectively, for HEA. The specificity of CAS (88.9%) was significantly higher than that of HEA (78.5%; P < 0.0001). On the basis of its good sensitivity and specificity, CAS medium can be recommended for use for primary plating when human stool samples are screened for Salmonella spp. PMID:9986847

  12. Usefulness of Candida ID2 agar for the presumptive identification of Candida dubliniensis.

    PubMed

    Eraso, Elena; Sahand, Ismail H; Villar-Vidal, María; Marcos, Cristina; Dolores Moragues, María; Madariaga, Lucila; Pontón, José; Quindós, Guillermo

    2006-11-01

    CHROMagar Candida and Candida ID2 are widely used for the isolation and presumptive identification of Candida spp. based on the color of the colonies on these two media. We have studied the usefulness of these chromogenic media for differentiating Candida dubliniensis from Candida albicans isolates. One hundred isolates of C. dubliniensis and 100 C. albicans isolates were tested on Candida ID2, CHROMagar Candida (CHROMagar), and CHROMagar Candida reformulated by BBL. CHROMagar Candida and CHROMagar Candida BBL did not allow a clear differentiation of the two species based upon the shade of the green color of C. dubliniensis colonies. However, on Candida ID2, all C. dubliniensis isolates produced turquoise blue colonies whereas 91% of C. albicans colonies were cobalt blue. The sensitivity and the specificity for differentiating between C. dubliniensis fromC. albicans on Candida ID2 were 100% and 91%, respectively; whereas on CHROMagar Candida these values were 63% and 89% and on CHROMagar Candida BBL they were 18% and 98%. Candida ID2 agar provides a simple and accurate laboratory approach for the identification and differentiation of C. dubliniensis on the basis of the colony color.

  13. Dichromated agar: a promising doped biocopolymer for real time holographic recording

    NASA Astrophysics Data System (ADS)

    Bolte, Michèle; Israëli, Yaël; Rivaton, Agnès; Lessard, Roger A.

    2006-09-01

    Agar is a natural polysaccharide which, when doped with dichromate ammonium, can be considered as a promising light sensitive material used for real time hologram recording. The volume transmission gratings were recorded with a Kypton laser at 413 nm and they were read in real-time with a He/Ne laser at 632.8 nm contrary to dichromated gelatin. The so obtained holograms formed were phase holograms due to a refraction index modulation. The optimisation of chemical and physical parameters was investigated in order to form high quality holograms. It was demonstrated the crucial role played by the remaining water in the final film on the value of the diffraction efficiency. In the optimal conditions, a maximum diffraction efficiency of 37 % was attained. Both on-off experiments and the storage of the exposed materials at room temperature and in the dark reveal that the holograms were stable. An attempt to rationalize the set of results in terms of chemical structure of the polymeric matrix and of its ability to stabilize chromium (V) is presented.

  14. Physico-chemical and microstructural properties of fish gelatin/agar bio-based blend films.

    PubMed

    Mohajer, Setareh; Rezaei, Masoud; Hosseini, Seyed Fakhreddin

    2017-02-10

    This study was conducted with the aim of improving the physico-chemical properties of fish gelatin (FG) based films. For this purpose, FG was blended with agar (AG) in different compositions to acquire biodegradable films (100:0, 80:20, 60:40, 50:50 & 0:100, FG:AG). The obtained results showed that the AG addition strongly increased the film rigidity and resistance to fracture, while reducing the film stretchability, mainly at 50FG: 50AG ratio. AG incorporation greatly reduced the water vapor permeability (WVP) and solubility of gelatin films, as this decline for the blend film with a 50:50 ratio of biopolymers has been about 41% and 66%, respectively (p<0.05). Additional advantages of AG inclusion to FG films are the reduction of the UV-transmittance. Both polymers showed good compatibility, as demonstrated by scanning electron microscopy (SEM) and atomic force microscopy (AFM) images. Therefore, the blend composition influenced the properties of FG/AG bio-based films.

  15. Performance of the AOAC use-dilution method with targeted modifications: collaborative study.

    PubMed

    Tomasino, Stephen F; Parker, Albert E; Hamilton, Martin A; Hamilton, Gordon C

    2012-01-01

    The U.S. Environmental Protection Agency (EPA), in collaboration with an industry work group, spearheaded a collaborative study designed to further enhance the AOAC use-dilution method (UDM). Based on feedback from laboratories that routinely conduct the UDM, improvements to the test culture preparation steps were prioritized. A set of modifications, largely based on culturing the test microbes on agar as specified in the AOAC hard surface carrier test method, were evaluated in a five-laboratory trial. The modifications targeted the preparation of the Pseudomonas aeruginosa test culture due to the difficulty in separating the pellicle from the broth in the current UDM. The proposed modifications (i.e., the modified UDM) were compared to the current UDM methodology for P. aeruginosa and Staphylococcus aureus. Salmonella choleraesuis was not included in the study. The goal was to determine if the modifications reduced method variability. Three efficacy response variables were statistically analyzed: the number of positive carriers, the log reduction, and the pass/fail outcome. The scope of the collaborative study was limited to testing one liquid disinfectant (an EPA-registered quaternary ammonium product) at two levels of presumed product efficacies, high and low. Test conditions included use of 400 ppm hard water as the product diluent and a 5% organic soil load (horse serum) added to the inoculum. Unfortunately, the study failed to support the adoption of the major modification (use of an agar-based approach to grow the test cultures) based on an analysis of method's variability. The repeatability and reproducibility standard deviations for the modified method were equal to or greater than those for the current method across the various test variables. However, the authors propose retaining the frozen stock preparation step of the modified method, and based on the statistical equivalency of the control log densities, support its adoption as a procedural change to

  16. Comet assay to assess the genotoxicity of Persian walnut (Juglans regia L.) husks with statistical evaluation.

    PubMed

    Petriccione, Milena; Ciniglia, Claudia

    2012-07-01

    The aim of this study was to confirm the utility of the Comet assay as a genotoxicity screening test for evaluating the impact of walnut husk aqueous extract. Phytotoxicity assays using diluted and undiluted walnut husk aqueous extracts were performed on young roots of Raphanus sativus (radish), and the Comet assay was used to evaluate DNA integrity in isolated radish radicle nuclei. The results reveal a dose-dependent accumulation of DNA damage in radish radicles treated with walnut husks water extract and that the Kolmogorov-Smirnov test combined with Johnson SB distribution was the best approach for describing Comet assay data.

  17. Development of an automated, high-throughput bactericidal assay that measures cellular respiration as a survival readout for Neisseria meningitidis.

    PubMed

    Mak, Puiying A; Santos, George F; Masterman, Kelly-Anne; Janes, Jeff; Wacknov, Bill; Vienken, Kay; Giuliani, Marzia; Herman, Ann E; Cooke, Michael; Mbow, M Lamine; Donnelly, John

    2011-08-01

    Complement-mediated bactericidal activity has long been regarded as the serological correlate of protective immunity against Neisseria meningitidis. This was affirmed in 2005 at a WHO-sponsored meningococcal serology standardization workshop. The assay currently employed by most laboratories involves determining surviving bacterial colony counts on agar as a readout which is labor-intensive, time-consuming, and not amendable to rapid data analysis for clinical trials. Consequently, there is an acute need to develop a sensitive, high-throughput bactericidal assay to enable a rapid and robust assessment of the effectiveness of vaccine candidates. To this end, we have developed an automated, kinetic assay based on the fluorescent respiration product of resazurin which reduces assay volume, shortens assay time, and facilitates automation of data analysis. We demonstrate proof of concept for applicability of this high-throughput system with multiple meningococcal strains and utilizing different lots of human complement. The assay is robust and highly reproducible. Titers obtained by the fluorescence readout method are strongly correlated with the data obtained using the conventional, agar plate-based assay. These results demonstrate that the detection of bacteria that have survived the bactericidal reaction by measuring metabolic activity using a fluorescent dye as an alternative readout is a promising approach for the development of a high-throughput bactericidal assay.

  18. SNAP Assay Technology.

    PubMed

    O'Connor, Thomas P

    2015-12-01

    The most widely used immunoassay configuration is the enzyme-linked immunosorbent assay (ELISA) because the procedure produces highly sensitive and specific results and generally is easy to use. By definition, ELISAs are immunoassays used to detect a substance (typically an antigen or antibody) in which an enzyme is attached (conjugated) to one of the reactants and an enzymatic reaction is used to amplify the signal if the substance is present. Optimized ELISAs include several steps that are performed in sequence using a defined protocol that typically includes application of sample and an enzyme-conjugated antibody or antigen to an immobilized reagent, followed by wash and enzyme reaction steps. The SNAP assay is an in-clinic device that performs each of the ELISA steps in a timed sequential fashion with little consumer interface. The components and mechanical mechanism of the assay device are described. Detailed descriptions of features of the assay, which minimize nonspecific binding and enhance the ability to read results from weak-positive samples, are given. Basic principles used in assays with fundamentally different reaction mechanisms, namely, antigen-detection, antibody-detection, and competitive assays are given. Applications of ELISA technology, which led to the development of several multianalyte SNAP tests capable of testing for up to 6 analytes using a single-sample and a single-SNAP device are described.

  19. Serum selenium assay following serum ferritin assay

    SciTech Connect

    Stevens, R.G.; Morris, J.S.; Hann, H.L.; Pulsipher, B.; Stahlhut, M.W.

    1986-08-01

    Stored serum samples can be an important research resource into the etiology of cancer. These sera cannot be replaced and should therefore be used to best advantage. In previous epidemiologic studies, only single serum constituents have been assayed in individual serum samples. For example, serum ferritin has been examined in samples stored for as long as 10 years at -20C for a possible relation with general mortality (1) and cancer death (2). Ferritin is the tissue iron-storage protein and is therefore subject to denaturation. Serum selenium has also been examined in relation to cancer risk in a prospective manner by using stored frozen serum samples (3, 4). The interactions of a variety of serum factors in relation to cancer risk would be a desirable research goal, except that the amounts of serum typically available in frozen serum banks are less than 1 ml. It was the purpose of this investigation to determine if a radioimmunoassay for ferritin affected a subsequent neutron activation assay for selenium on the same 0.1 ml serum sample.

  20. Establishment of indirect immunofluorescence assay for rotavirus.

    PubMed

    Tao, J; Zhang, J; Liu, X; Jin, H; Jiang, C; Yin, Y

    2016-03-01

    Rotavirus infection is the most frequent cause of infantile gastroenteritis worldwide and a significant cause of death in infants and young children, following severe diarrhea and dehydration. Rotavirus vaccines are considered the most effective way to prevent rotavirus infections. In the process of developing rotavirus vaccines, it is crucial to establish a reliable and standardized method to determine vaccine titer. In this study, we developed an indirect immunofluorescence assay (IFA) to determine the infectious titer of Lanzhou lamb rotavirus (LLR) vaccine grown in MA104 cells. The activating concentration of trypsin was 1 µg/ml for healthy monolayers of MA104 cells at 100% confluence. After incubation for 18 hr, a rabbit anti-SA11 polyclonal antibody, diluted at 1:800 in PBS, was added to all wells, followed by an Alexa-488-conjugated secondary antibody diluted at 1:500 in PBS. Cells were examined with a fluorescence microscope. Our results show that IFA was more reproducible, more sensitive, simpler, and more rapid than the log 50% cell culture infectious dose-ELISA (lgCCID50-ELISA) in measuring the rotavirus vaccines. IFA provided a reliable basis for the qualitative and quantitative analysis of rotavirus, and the certification of rotavirus vaccine production.