Science.gov

Sample records for agar gel precipitation

  1. Electro-osmosis in gels: Application to Agar-Agar

    NASA Astrophysics Data System (ADS)

    Cherblanc, Fabien; Boscus, Jérôme; Bénet, Jean-Claude

    2008-10-01

    Widely used in food- and bio-engineering as a reference material, Agar-Agar gel is the focus of an experimental investigation concerning the electro-osmosis phenomenon. After presenting the experimental methods, one trial is discussed in detail. A fair reproducibility of results is obtained, and the averaged electro-osmotic permeability is provided. This value lies in the range generally measured on various kind of soils, even if Agar-Agar gel does not share any micro-structural characteristics with soils. To cite this article: F. Cherblanc et al., C. R. Mecanique 336 (2008).

  2. Agar-Gel Precipitin Technique in Anthrax Antibody Determinations1

    PubMed Central

    Ray, John G.; Kadull, Paul J.

    1964-01-01

    A modification of the agar-gel precipitation inhibition technique of Thorne and Belton for detecting anthrax antibodies reduces inconsistency of visually determined end points on the same sera observed by different technicians. Determination of the minimal reacting concentrations of the anthrax antigen and antibody reagents, modifications of the visualization apparatus, methods for combining reagents, and length of incubation periods contribute to the ease of the end-point determinations and the uniformity of results. When compared with the previous technique, the modified procedure is less time-consuming while retaining satisfactory reproducibility, simplicity, specificity, and sensitivity. Images FIG. 1 FIG. 2 PMID:14201088

  3. Comparison of dosimetry gels prepared by agar and bovine gelatine

    NASA Astrophysics Data System (ADS)

    Sağsöz, M. E.; Korkut, Ö.; Alemdar, N.; Aktaş, S.; Çalı, E. B.; Kantarcı, M.

    2016-04-01

    Gel dosimeters are unique materials capable of showing three dimensional (3D) dose distributions of therapeutic or diagnostic exposures. Fricke gel dosimeters can be considered as chemical dosimeters that rely on a radiation-induced chemical reaction. Dose distribution of Fricke solutions containing Fe+2 ions determines the transformation of acidic, oxygen saturated Fe+2 ions to Fe+3 ions by the ionizing radiation in aqueous solutions. In this study we produced two different types of gel dosimeters using agar and bovine gelatin with similar fabrication methods. We compared the magnetic resonance (MR) T1 imaging responses of these two gel dosimeters to acquire a dose dependency of MR intensities. In conclusion agar gel dosimeters found to be produced easily and more consistent.

  4. Characteristic features and dye degrading capability of agar-agar gel immobilized manganese peroxidase.

    PubMed

    Bilal, Muhammad; Asgher, Muhammad; Shahid, Muhammad; Bhatti, Haq Nawaz

    2016-05-01

    Immobilization of enzymes has been regarded as an efficient approach to develop biocatalyst with improved activity and stability characteristics under reaction conditions. In the present study, purified manganese peroxidase (MnP) from Ganoderma lucidum IBL-05 was immobilized in agar-agar support using entrapment technique. Maximum immobilization yield was accomplished at 4.0% agar-agar gel. The immobilized MnP exhibited better resistance to changes in pH and temperature than the free enzyme, with optimal conditions being pH 6.0 and 50 °C. The kinetic parameters Km and Kcat/Km for free and entrapped MnP were calculated to be 65.6 mM and 6.99 M(-1) s(-1), and 82 mM and 8.15 M(-1) s(-1), respectively. Thermo-stability was significantly improved after immobilization. After 120 h, the insolubilized MnP retained its activity up to 71.9% and 60.3% at 30 °C and 40 °C, respectively. It showed activity until 10th cycle and retained 74.3% residual activity after 3th cycle. The effects of H2O2, ionic strength and potential inhibitors on activity of free and immobilized enzyme were investigated. Moreover, the decolorization of three structurally different dyes was monitored in order to assess the degrading capability of the entrapped MnP. The decolorization efficiencies for all the tested dyes were 78.6-84.7% after 12h. The studies concluded that the toxicity of dyes aqueous solutions was significantly reduced after treatment. The remarkable catalytic, thermo-stability and re-cycling features of the agar-agar immobilized MnP display a high potential for biotechnological applications. PMID:26854887

  5. Thermal-induced ageing of agar solutions: impact on the structural and mechanical properties of agar gels

    NASA Astrophysics Data System (ADS)

    Mao, Bosi; Bentaleb, Ahmed; Louerat, Frédéric; Divoux, Thibaut; Snabre, Patrick

    Numerous hydrogels are prepared by cooling down to ambient temperature, aqueous polymer solutions brought to a boil. Although the incubation time of the polymer solution at such a high temperature could be used as a tuning parameter, its impact on the subsequent gelation has been poorly investigated. Here we study the effect of prolonged heating at 80°C on a 1.5% wt solution of agar, a natural polysaccharide. The incubation time is varied from a few hours up to five days. We show that the agar sol. continuously degrades as the result of both the hydrolysis and the intermolecular oxidation of the polymer chains. Furthermore, electronic microscopy and X-ray diffraction experiments reveal that gels formed from older agar sols display an increasingly coarser microstructure composed of micron-sized aggregated pieces of polysaccharides, in contrast with the fibrous-like structure of gels made from fresh sols. Along with structural changes prolonged incubation time leads to weaker gels of lower shear elastic modulus. Finally, macro-indentation experiments coupled to direct visualization show that increasing the incubation time of the agar sol. decreases the yield strain of the gel by a factor of three, while the rupture scenario turns continuously from brittle to ductile-like. Acknowledging funding from BioMérieux & CNRS.

  6. Serotyping reanalysis of unserotypable Actinobacillus pleuropneumoniae isolates by agar gel diffusion test.

    PubMed

    Morioka, Ayako; Shimazaki, Yoko; Uchiyama, Mariko; Suzuki, Shoko

    2016-05-01

    We observed increasing unserotypable (UT) Actinobacillus pleuropneumoniae isolates using agar gel diffusion (AGD) test. To reanalyze their serovar, we performed rapid slide agglutination (RSA) test and multiplex PCR for 47 UT isolates. Of these, 25 were serovar 1 (UT-serovar 1), 20 were serovar 2 (UT-serovar 2) and 2 were serovar 15 (UT-serovar 15). We examined serotyping antigen extraction temperature to determine heat influence. UT-serovar 1 and 15 were influenced by heat, because their precipitation lines were observed in the case of low antigen extraction temperature. To investigate the relationship between antigenicity and genotype, we performed pulsed-field gel electrophoresis (PFGE) analysis using UT-serovar 2 and 15. The predominant PFGE pattern of UT-serovar 2 was identical to that of serovar 2. PMID:26726101

  7. Serotyping reanalysis of unserotypable Actinobacillus pleuropneumoniae isolates by agar gel diffusion test

    PubMed Central

    MORIOKA, Ayako; SHIMAZAKI, Yoko; UCHIYAMA, Mariko; SUZUKI, Shoko

    2016-01-01

    We observed increasing unserotypable (UT) Actinobacillus pleuropneumoniae isolates using agar gel diffusion (AGD) test. To reanalyze their serovar, we performed rapid slide agglutination (RSA) test and multiplex PCR for 47 UT isolates. Of these, 25 were serovar 1 (UT-serovar 1), 20 were serovar 2 (UT-serovar 2) and 2 were serovar 15 (UT-serovar 15). We examined serotyping antigen extraction temperature to determine heat influence. UT-serovar 1 and 15 were influenced by heat, because their precipitation lines were observed in the case of low antigen extraction temperature. To investigate the relationship between antigenicity and genotype, we performed pulsed-field gel electrophoresis (PFGE) analysis using UT-serovar 2 and 15. The predominant PFGE pattern of UT-serovar 2 was identical to that of serovar 2. PMID:26726101

  8. Identification of Actinomyces israelii and Actinomyces naeslundii by Fluorescent-Antibody and Agar-Gel Diffusion Techniques1

    PubMed Central

    Lambert, Frank W.; Brown, June M.; Georg, Lucille K.

    1967-01-01

    This study was an attempt to develop a fluorescent-antibody (FA) test to differentiate Actinomyces israelii and A. naeslundii as an aid in their laboratory identification. Two strains of A. israelii (X522 and A601) and two strains of A. naeslundii (X454 and X600), which had received intensive study by several investigators, were used for the immunization of rabbits. Working titers, based on tests with antigens prepared from the homologous strains and from well-established heterologous strains, were determined for each labeled antibody preparation. These conjugates and their normal serum control conjugates were used separately to stain 85 cultures of Actinomyes species and 23 strains of other species that might be confused with them. Acetone-precipitated soluble antigens from these same strains were tested with different antisera in the agar-gel diffusion test. Results showed that A. israelii (X522 and A601) and A. naeslundii (X454 and X600) labeled antiglobulins, when used at their working titers, stained most strains of their homologous species. Agar-gel diffusion results showed general agreement with those of the FA tests. The two tests appear to be equal in sensitivity, but the FA test is more specific, since several cross-reactions were noted with the agar-gel diffusion test whereas no cross-reactions were obtained with the FA reagents. Agar-gel and FA studies suggest that at least two serotypes of A. israelii may be associated with human disease. Although the majority of strains tested in this study appear to belong to a common serotype, “serotype 1,” two strains of an apparent second serotype, “serotype 2,” were encountered. FA staining of tissue impression smears from experimentally infected mice was successful when a counterstain, Evans Blue dye, was used. PMID:4964473

  9. Effects of shape and size of agar gels on heating uniformity during pulsed microwave treatment.

    PubMed

    Soto-Reyes, Nohemí; Temis-Pérez, Ana L; López-Malo, Aurelio; Rojas-Laguna, Roberto; Sosa-Morales, María Elena

    2015-05-01

    Model gel systems with different shape (sphere, cylinder, and slab) and size (180 and 290 g) were prepared with agar (5%) and sucrose (5%). Dielectric constant (ε'), loss factor (ε"), thermophysical properties, and temperature distribution of the model system were measured. Each agar model system was immersed and suspended in water, and then, heated in a microwave oven with intermittent heating until the core temperature reached 50 °C. The ε' and ε" of agar gels decreased when frequency increased. The density and thermal conductivity values of the agar gels were 1033 kg/m(3) and 0.55 W/m °C, respectively. The temperature distribution of sphere, cylinder, and slab was different when similar power doses were applied. The slab reached 50 °C in less time (10 min) and showed a more uniform heating than spheres and cylinders in both sizes. Agar model systems of 180 g heated faster than those of 290 g. The coldest point was the center of the model systems in all studied cases. Shape and size are critical food factors that affect the heating uniformity during microwave heating processes. PMID:25827444

  10. Co-precipitation with PVP and Agar to Improve Physicomechanical Properties of Ibuprofen

    PubMed Central

    Maghsoodi, Maryam; Kiafar, Farhad

    2013-01-01

    Objective(s) : Ibuprofen is a problematic drug in tableting due to its viscoelastic properties. Additionally its high cohesivity results in low flowability. In this study, co-precipitation of ibuprofen with varying concentration of agar and PVP to optimize properties of Ibuprofen was carried out. Materials and Methods: Co-precipitates of ibuprofen- PVP or agar were prepared by solvent evaporation technique under vacuum condition. Differential scanning calorimetry (DSC), X -ray diffraction of powder (XRDP) and FT-IR spectroscopy were used to investigate the solid state characteristics of the co-precipitates. The dissolution behavior, flowability, particle size and compaction properties of various batches were also studied. Results: Co-precipitation of drug with agar led to a change in habit from needle to plate shape crystals, while drug –PVP co-precipitates had agglomerated structure and consisted of numerous crystals which had been aggregated together. The co-precipitates showed improved flow properties compared with ibuprofen alone. Precipitation of ibuprofen with these additives led to modification in the dissolution of the drug. Agar in 1% w/w improved slightly the dissolution rate of drug while PVP had a negative impact and led to reduction in the dissolution rate of drug to less than that of pure drug. The all obtained co-precipitates exhibited significantly improved tableting behavior compared with drug crystals alone. This may be due to this fact that, the polymer covering the drug particles increases and changes the nature of the surface area available for interparticulate bonds between particles. DSC, XRDP and FT-IR experiments showed that drug particles, in co-precipitates samples, did not undergo polymorphic modifications. Conclusion: The study highlights the influence of polymeric additives on crystallization process leading to modified performance. PMID:24250942

  11. Co-precipitation with PVP and Agar to Improve Physicomechanical Properties of Ibuprofen

    PubMed Central

    Maghsoodi, Maryam; Kiafar, Farhad

    2013-01-01

    Objective(s) : Ibuprofen is a problematic drug in tableting due to its viscoelastic properties. Additionally its high cohesivity results in low flowability. In this study, co-precipitation of ibuprofen with varying concentration of agar and PVP to optimize properties of Ibuprofen was carried out. Materials and Methods: Co-precipitates of ibuprofen- PVP or agar were prepared by solvent evaporation technique under vacuum condition. Differential scanning calorimetry (DSC), X -ray diffraction of powder (XRDP) and FT-IR spectroscopy were used to investigate the solid state characteristics of the co-precipitates. The dissolution behavior, flowability, particle size and compaction properties of various batches were also studied. Results: Co-precipitation of drug with agar led to a change in habit from needle to plate shape crystals, while drug –PVP co-precipitates had agglomerated structure and consisted of numerous crystals which had been aggregated together. The co-precipitates showed improved flow properties compared with ibuprofen alone. Precipitation of ibuprofen with these additives led to modification in the dissolution of the drug. Agar in 1% w/w improved slightly the dissolution rate of drug while PVP had a negative impact and led to reduction in the dissolution rate of drug to less than that of pure drug. The all obtained co-precipitates exhibited significantly improved tableting behavior compared with drug crystals alone. This may be due to this fact that, the polymer covering the drug particles increases and changes the nature of the surface area available for interparticulate bonds between particles. DSC, XRDP and FT-IR experiments showed that drug particles, in co-precipitates samples, did not undergo polymorphic modifications. Conclusion: The study highlights the influence of polymeric additives on crystallization process leading to modified performance. PMID:24250936

  12. An agar gel enzyme assay (AGEA) for simple detection of Salmonella enteritidis antibodies in chicken sera.

    PubMed

    Kim, C J; Nagaraja, K V

    1991-01-01

    An agar gel enzyme assay (AGEA) was developed for the detection of antibodies to Salmonella enteritidis (SE). The assay was based on the ability of antibodies to diffuse through an agar gel and react with antigen coated on a polystyrene surface. The antigen-antibody reaction was then made visible by applying an enzyme-conjugated anti-immunoglobulin and the addition, subsequently, of a substrate-containing gel. The color change in circular zones was taken as the indication for the presence of antibodies. The present investigation reports identification of an antigen specific for SE and its use in the development of a relatively simple AGEA procedure. The results of AGEA were compared with those of conventional microagglutination (MA) test and serum plate (SP) test. The percentage agreement between MA and AGEA in positive serum sample was found to be 94.4%, and in negative serum samples it was found to be 88.8%. The present results suggest that the AGEA could be a very useful screening test for the detection of SE antibodies because the assay is inexpensive, specific and simple to perform without much equipment, and give results within a 3-hr period. PMID:1832368

  13. Development of a mixed antigen agar gel enzyme assay (AGEA) for the detection of antibodies to poxvirus in chicken and turkey sera.

    PubMed

    Tadese, Theodros; Potter, E A; Reed, W M

    2003-02-01

    A mixed-antigen agar gel enzyme assay (AGEA) was developed to detect antibodies to poxviruses in chicken and turkey sera. The assay combines the principles of immunodiffusion and enzyme assay. For the detection of antibodies to fowl poxvirus (FP), pigeon poxvirus (PP) and turkey poxvirus (TP) in turkey serum samples, the three antigens were combined to form a mixed-antigen assay. To screen for antibodies to FP and PP in chicken serum samples, the two antigens were combined. When FP and PP viruses were combined as antigens, the sensitivity for chicken sera was 64% but the sensitivity of the agar gel precipitation test (AGPT) was 34% (P<0.001). When antibodies were detected in turkey sera using the mixed antigens, the AGEA had a sensitivity of 66.4% while that of AGPT was 25% (P<0.001). PMID:12655123

  14. Simple protocol for secondary school hands-on activity: Electrophoresis of pre-stained nucleic acids on agar-agar borate gels.

    PubMed

    Britos, Leticia; Goyenola, Guillermo; Oroño, Silvia Umpiérrez

    2004-09-01

    An extremely simple, inexpensive, and safe method is presented, which emulates nucleic acids isolation and electrophoretic analysis as performed in a research environment, in the context of a secondary school hands-on activity. The protocol is amenable to an interdisciplinary approach, taking into consideration the electrical and chemical parameters of the electrophoretic system. Furthermore, the laboratory is framed in a more comprehensive pedagogical setting, which addresses the methodological aspects of a pivotal scientific enterprise such as the Human Genome Project. In this setting, the hands-on activity is complemented with animations, paper models, and discussions. Additionally, our results indicate that the use of borate buffer and agar-agar gels suits many of the experiments included in college-level laboratory activities, which currently make use of more expensive agarose gels and TBE or TAE buffers. PMID:21706751

  15. Agar gel immunodiffusion assay to detect antibodies to Type A influenza virus.

    PubMed

    Jenson, Terra A

    2014-01-01

    The agar gel immunodiffusion (AGID) test is used to detect antibodies to Type A influenza group-specific antigens, i.e., the ribonucleoprotein (RNP) and matrix (M) proteins. Therefore, this test will detect antibodies to all influenza A virus subtypes. AGID is commonly used to screen poultry flocks for avian influenza virus infection. The AGID is a simple and economical serological test. All serological testing has its advantages and disadvantages which should be considered before choosing the optimal test for the laboratory needs. Each laboratory must evaluate the laboratory's resources, the volume of testing, the goal of testing, how the test results are used and what types of samples are being tested in order to select the optimal test. PMID:24899427

  16. NMR analysis of weak molecular interactions using slice-selective experiments via study of concentration gradients in agar gels.

    PubMed

    Mitrev, Y; Simova, S; Jeannerat, D

    2016-04-01

    Weak molecular interactions can be localized and quantified using a single NMR experiment analysing concentration gradients generated in agar gels. The spectra from various cross-sections along the gradient were obtained using a slice-selective pulse sequence realisable with standard NMR equipment. PMID:27009847

  17. Beyond Agar: Gel Substrates with Improved Optical Clarity and Drug Efficiency and Reduced Autofluorescence for Microbial Growth Experiments

    PubMed Central

    Jaeger, Philipp A.; McElfresh, Cameron; Wong, Lily R.

    2015-01-01

    Agar, a seaweed extract, has been the standard support matrix for microbial experiments for over a century. Recent developments in high-throughput genetic screens have created a need to reevaluate the suitability of agar for use as colony support, as modern robotic printing systems now routinely spot thousands of colonies within the area of a single microtiter plate. Identifying optimal biophysical, biochemical, and biological properties of the gel support matrix in these extreme experimental conditions is instrumental to achieving the best possible reproducibility and sensitivity. Here we systematically evaluate a range of gelling agents by using the yeast Saccharomyces cerevisiae as a model microbe. We find that carrageenan and Phytagel have superior optical clarity and reduced autofluorescence, crucial for high-resolution imaging and fluorescent reporter screens. Nutrient choice and use of refined Noble agar or pure agarose reduce the effective dose of numerous selective drugs by >50%, potentially enabling large cost savings in genetic screens. Using thousands of mutant yeast strains to compare colony growth between substrates, we found no evidence of significant growth or nutrient biases between gel substrates, indicating that researchers could freely pick and choose the optimal gel for their respective application and experimental condition. PMID:26070672

  18. Stoichiometric hydroxyapatite obtained by precipitation and sol gel processes

    NASA Astrophysics Data System (ADS)

    Vazquez, C. G.; Barba, C. P.; Munguia, N.

    2005-06-01

    Three methods for obtaining hydroxiapatite (HA) are described. HA is a very interesting ceramic because of its many medical applications. The first two precipitation methods start from calcium and phosphorous compounds, whereas the third method is a sol-gel process that uses alcoxides. The products were characterized and compared. The observed differences are important for practical applications.

  19. Agar gel immunodiffusion test for the detection of bovine leukemia virus antibodies: lack of trans-Atlantic standardization.

    PubMed Central

    Simard, C; Richardson, S; Dixon, P; Komal, J

    2000-01-01

    Two agar gel immunodiffusion (AGID) kits for the serodiagnosis of bovine leukemia virus (BLV) were imported from Europe and were compared with North American kits. The BLV AGID kits from North America and from Europe differed significantly. The punches were different, as were the pattern distribution in the agar of the reference and the test sera, resulting in differences in the reading of the immunoprecipitation lines. Based on the testing of 1200 serum samples from cattle, the European kits gave a good correlation with the American kits, as indicated by their respective kappa values. However, the European kits were found to be less sensitive when evaluated against weakly positive samples from field specimens or following a dilution trial. Only 65% and 50% of the weakly positive samples detected by the American kit #1 were detected by the European kits #2 and #3, respectively. The American kit was also capable of detecting BLV antibodies in 45% of strongly positive samples diluted 1/50 in negative sera, while antibodies were detected in only 15% of the samples with the European kit #2 and in none of the samples with the European kit #3. False negatives were also detected with the European kits. Among the false negatives, the degree of expected reactions was weak (European kit #2) or of varying degrees of positivity (European kit #3). Besides the differences in format and performance, the BLV-AGID kits in Europe are evaluated with the National Standard Serum E4 while a proficiency panel composed of a quadruplicate set of 10 reference sera is used in Canada to monitor the kits. Based on the overall observations, we noted a lack of standardization between the BLV-AGID kits used in North America and in Europe. PMID:10805247

  20. Investigation of the effect of power ultrasound on the nucleation of water during freezing of agar gel samples in tubing vials.

    PubMed

    Kiani, Hossein; Sun, Da-Wen; Delgado, Adriana; Zhang, Zhihang

    2012-05-01

    Nucleation, as an important stage of freezing process, can be induced by the irradiation of power ultrasound. In this study, the effect of irradiation temperature (-2 °C, -3 °C, -4 °C and -5 °C), irradiation duration (0s, 1s, 3s, 5s, 10s or 15s) and ultrasound intensity (0.07 W cm(-2), 0.14 W cm(-2), 0.25 W cm(-2), 0.35 W cm(-2) and 0.42 W cm(-2)) on the dynamic nucleation of ice in agar gel samples was studied. The samples were frozen in an ethylene glycol-water mixture (-20 °C) in an ultrasonic bath system after putting them into tubing vials. Results indicated that ultrasound irradiation is able to initiate nucleation at different supercooled temperatures (from -5 °C to -2 °C) in agar gel if optimum intensity and duration of ultrasound were chosen. Evaluation of the effect of 0.25 W cm(-2) ultrasound intensity and different durations of ultrasound application on agar gels showed that 1s was not long enough to induce nucleation, 3s induced the nucleation repeatedly but longer irradiation durations resulted in the generation of heat and therefore nucleation was postponed. Investigation of the effect of ultrasound intensity revealed that higher intensities of ultrasound were effective when a shorter period of irradiation was used, while lower intensities only resulted in nucleation when a longer irradiation time was applied. In addition to this, higher intensities were not effective at longer irradiation times due to the heat generated in the samples by the heating effect of ultrasound. In conclusion, the use of ultrasound as a means to control the crystallization process offers promising application in freezing of solid foods, however, optimum conditions should be selected. PMID:22070859

  1. [Analysis of bactericidal material generated by electrical devices advertising bactericidal ability against bacteria on the agar gel plates].

    PubMed

    Nishimura, Hidekazu

    2012-11-01

    Several Japanese companies sell electrical devices advertised as effective in inactivating viruses and killing bacteria by releasing special materials, e.g., Plasmacluster ions, Nanoe particle and minus ions, into the air. These companies claim that their devices killed bacteria on plates in their own experiments. We tested device effectiveness using the same experiments from the Plasmacluster ioniser SHARP Co., Japan, the Nanoe generator Panasonic Co., Japan, and the Vion KING JIM Co., Japan, to test their advertising claims. Bactericidal ability on agar plate was tested, using Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus cereus, and Enterococcus faecalis as follows: the medium containing a certain amount of each bacterium was put onto an agar plate and smeared. Plates were kept in a closed chamber (inner volume 14.4 m3) or a glove box (inner volume 0.2 m), with one of the devices run for 2 hours. Plates not exposed to any device were used as controls. Each plate was retrieved and put in an incubator to count the number of bacterial colonies formed on the plate. There was no significant difference in the number of colonies on plates exposed to devices compared to control, in the number for all devices, or in all bacteria tested in experiments in the 14.4 m3 chamber. These results strongly suggest that these devices have almost no bactericidal effect, at least in space exceeding this volume. Colony formation was suppressed in the glove box in all devices and in all bacteria tested except P. aeruginosa, although the degree of suppression differed among experiments. The colony formation suppression mechanism was analyzed, and indicated that:colony formation did not change even after the removal of Plasmacluster ions, Nanoe particles, or negative ions from the air, while colony formation was decreased drastically by the removal of ozone from space, which was revealed to be generated inevitably during device operation. These results strongly suggest that the

  2. Detection of Aspergillus-specific antibodies by agar gel double immunodiffusion and IgG ELISA in feline upper respiratory tract aspergillosis.

    PubMed

    Barrs, V R; Ujvari, B; Dhand, N K; Peters, I R; Talbot, J; Johnson, L R; Billen, F; Martin, P; Beatty, J A; Belov, K

    2015-03-01

    Feline upper respiratory tract aspergillosis (URTA) is an emerging infectious disease. The aims of this study were: (1) to assess the diagnostic value of detection of Aspergillus-specific antibodies using an agar gel double immunodiffusion (AGID) assay and an indirect immunoglobulin G (IgG) ELISA; and (2) to determine if an aspergillin derived from mycelia of Aspergillus fumigatus, Aspergillus niger and Aspergillus flavus can be used to detect serum antibodies against cryptic Aspergillus spp. in Aspergillus section Fumigati. Sera from cats with URTA (group 1: n = 21) and two control groups (group 2: cats with other upper respiratory tract diseases, n = 25; group 3: healthy cats and cats with non-respiratory, non-fungal illness, n = 84) were tested. Isolates from cats with URTA comprised A. fumigatus (n = 5), A. flavus (n = 1) and four cryptic species: Aspergillus felis (n = 12), Aspergillus thermomutatus (Neosartorya pseudofischeri, n = 1), Aspergillus lentulus (n = 1) and Aspergillus udagawae (n = 1). Brachycephalic purebred cats were significantly more likely to develop URTA than other breeds (P = 0.013). The sensitivity (Se) of the AGID was 43% and the specificity (Sp) was 100%. At a cut-off value of 6 ELISA units/mL, the Se of the IgG ELISA was 95.2% and the Sp was 92% and 92.9% for groups 2 and 3 cats, respectively. Aspergillus-specific antibodies against all four cryptic species were detected in one or both assays. Assay Se was not associated with species identity. Detection of Aspergillus-specific antibodies by IgG ELISA has high Se and Sp for diagnosis of feline URTA. PMID:25634077

  3. Some Experiments With Agar-Grown Seedlings

    ERIC Educational Resources Information Center

    Freeland, P. W.

    1973-01-01

    Two percent agar gel is reported as a better medium for germination and growth studies. Students can be encouraged to undertake many simple experiments and make precise observations by using this medium. (PS)

  4. Comparative avoidance behaviour of the earthworm Eisenia fetida towards chloride, nitrate and sulphate salts of Cd, Cu and Zn using filter paper and extruded water agar gels as exposure media.

    PubMed

    Demuynck, Sylvain; Lebel, Aurélie; Grumiaux, Fabien; Pernin, Céline; Leprêtre, Alain; Lemière, Sébastien

    2016-07-01

    We studied the avoidance behaviour of the earthworm Eisenia fetida towards Cd, Cu, and Zn, trace elements (TEs) tested as chloride, nitrate and sulphate salts. Sub adults were exposed individually using dual-cell chambers at 20+2°C in the dark. Recordings were realised at different dates from 2h to 32h. We used filter paper and extruded water agar gel as exposure media to evaluate the contribution of the dermal and the digestive exposure routes on the avoidance reactions. Exposures to Cu or Cd (10mgmetal ionL(-1)) resulted in highly significant avoidance reactions through the exposure duration. Worms avoided Zn poorly and reactions towards Zn salts varied along the exposure. Worm sensitivity towards TEs differed between salts and this could result from differential toxicity or accessibility of these TE salts to earthworms. The anion in itself was not the determinant of the avoidance reactions since exposures to similar concentrations of these anions using calcium salts did not result in significant avoidance worm behaviour. Avoidance responses towards TEs were higher in the case of water agar exposures than in filter paper exposures. Thus, dermal contacts with TE solutions would elicit worm avoidance but signals from receptors located inside the digestive tract could reinforce this behaviour. The use of extruded water agar gels as the substrate allows checking the real sensitivity of earthworm species towards TEs since the TE concentrations leading to significant avoidance reactions were below those reported in the literature when using TE-spiked soils. PMID:26995062

  5. Chemical properties of ω-3 fortified gels made of protein isolate recovered with isoelectric solubilisation/precipitation from whole fish.

    PubMed

    Tahergorabi, Reza; Beamer, Sarah K; Matak, Kristen E; Jaczynski, Jacek

    2013-08-15

    Protein isolate was recovered from whole gutted fish using isoelectric solubilisation/precipitation (ISP). The objective was to determine chemical properties of heat-set gels made of the ISP protein isolate fortified with ω-3 polyunsaturated fatty acids (PUFAs)-rich oils (flaxseed, fish, algae, krill, and blend). The extent of the PUFAs increase, ω-6/ω-3 FAs and unsaturated/saturated FAs ratios, and the indices of thrombogenicity and atherogenicity depended on specific ω-3 PUFAs-rich oil used to fortify protein isolate gels. Lipid oxidation in ω-3 PUFAs fortified gels was minimal, although greater (P<0.05) than control gels (without ω-3 PUFAs fortification). However, all gels were in the slightly rancid, but acceptable range. The commonly used thiobarbituric-acid-reactive-substances (TBARS) assay to determine lipid oxidation in seafood may be inaccurate for samples containing krill oil due to its red pigment, astaxanthin. Protein degradation (total-volatile-basic-nitrogen) was greater (P<0.05) in ω-3 PUFAs fortified gels than control gels. However, all gels were considerably below the acceptability threshold for protein degradation. The shear stress of ω-3 PUFAs fortified gels was generally greater than the control gels and the shear strain was generally unchanged. This study demonstrates that ω-3 PUFAs fortification of protein isolates recovered with ISP from fish processing by-products or whole fish has potential application in the development of functional foods. PMID:23561173

  6. Precipitation of C, Si and metals nanoparticles in silicon-based gels induced by swift heavy ion irradiation

    NASA Astrophysics Data System (ADS)

    Pivin, J. C.; Avasthi, D. K.; Singh, F.; Kumar, A.; Pippel, E.; Sagon, G.

    2005-07-01

    Studies of irradiation effects in inorganic polymers and gels performed at CSNSM during the last ten years are summarized, and new results concerning the effect of the density of transferred energy on the precipitation kinetics of C, Si and metal clusters are presented. The precipitation yield as a function of the fluence of ions with different masses and energies was investigated by means of various spectroscopies, depending on the particles nature. The rates of gel to ceramics conversion and of C, Si and metal precipitation are determined by the density of electronic excitations and nuclear collisions have little effect. Particles formed by ion irradiation show a narrower size distribution and, consequently, more interesting characteristics for magnetic or optical applications than those formed in heat treated gels.

  7. H2-induced copper and silver nanoparticle precipitation inside sol-gel silica optical fiber preforms

    PubMed Central

    2012-01-01

    Ionic copper- or silver-doped dense silica rods have been prepared by sintering sol-gel porous silica xerogels doped with ionic precursors. The precipitation of Cu or Ag nanoparticles was achieved by heat treatment under hydrogen followed by annealing under air atmosphere. The surface plasmon resonance bands of copper and silver nanoparticles have been clearly observed in the absorption spectra. The spectral positions of these bands were found to depend slightly on the particle size, which could be tuned by varying the annealing conditions. Hence, transmission electron microscopy showed the formation of spherical copper nanoparticles with diameters in the range of 3.3 to 5.6 nm. On the other hand, in the case of silver, both spherical nanoparticles with diameters in the range of 3 to 6 nm and nano-rods were obtained. PMID:22937818

  8. Agar polysaccharides from Gracilaria species (Rhodophyta, Gracilariaceae).

    PubMed

    Marinho-Soriano, E

    2001-07-26

    Yield, physical and chemical properties of agar from three agarophytes species (Gracilaria gracilis, G. dura and G. bursa-pastoris) were determined. The agar yield from the three species varied significantly (P<0.01). The highest yields of agar (34.8%) and the lowest (30%) were obtained from G. bursa-pastoris and G. gracilis, respectively. Highest gel strength (630+/-15 g cm(-2)) was obtained from agar extracted from G. gracilis and lowest from G. bursa-pastoris (26+/-3.6 g cm(-2)). The values of 3,6-anhydrogalactose were similar for G. gracilis and G. dura and there were no significant differences among the species. The sulfate contents varied significantly (P<0.01) and the higher value was obtained from G. bursa-pastoris. Among the three species, G. gracilis showed superior agar quality than the other two species, hence it can be considered a good potential source for industrial use. PMID:11472802

  9. 21 CFR 582.7115 - Agar-agar.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Agar-agar. 582.7115 Section 582.7115 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7115 Agar-agar. (a) Product. Agar-agar. (b) Conditions of use. This substance is generally recognized as safe when used...

  10. 21 CFR 582.7115 - Agar-agar.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Agar-agar. 582.7115 Section 582.7115 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7115 Agar-agar. (a) Product. Agar-agar. (b) Conditions of use. This substance is generally recognized as safe when used...

  11. Syneresis and delayed detachment in agar plates.

    PubMed

    Divoux, Thibaut; Mao, Bosi; Snabre, Patrick

    2015-05-14

    Biogels made of crosslinked polymers such as proteins or polysaccharides behave as porous soft solids and store large amounts of solvent. These gels undergo spontaneous aging, called syneresis, which consists of the shrinkage of the gel matrix and the progressive expulsion of solvent. As a result, a biogel originally casted in a container often loses contact with the container sidewalls, and the detachment time is difficult to anticipate a priori, since it may occur over variable time spans (from hours to days). Here we report on syneresis phenomena in agar plates, which consist of Petri dishes filled with a gel mainly composed of agar. Direct observations and speckle pattern correlation analysis allow us to rationalize the delayed detachment of the gel from the sidewall of the Petri dish. The detachment time t* is surprisingly not controlled by the mass loss as one would intuitively expect. Instead, t* is strongly correlated to the gel minimum thickness emin measured along the sidewall of the plate, and increases as a robust function of emin, independently of the prior mass-loss history. Time-resolved correlation spectroscopy atypically applied to such weakly diffusive media gives access to the local thinning rate of the gel. This technique also allows us to detect the gel micro-displacements that are triggered by water evaporation prior to the detachment, and even to anticipate the latter from a few hours. Our work provides observables to predict the detachment time of agar gels in dishes, and highlights the relevance of speckle pattern correlation analysis for the quantitative investigation of the syneresis dynamics in biopolymer gels. PMID:25812667

  12. Production of pseudorabies virus recombinant glycoprotein B and its use in an agar gel immunodiffusion (AGID) test for detection of antibodies with sensitivity and specificity equal to the virus neutralization assay.

    PubMed

    Serena, María Soledad; Geisler, Christoph; Metz, Germán Ernesto; Mórtola, Eduardo Carlos; Echeverría, María Gabriela

    2016-04-01

    Pseudorabies virus (PrV) causes Aujeszky's disease (AD), which affects mainly swine, but also cattle, sheep, and wild animals, resulting in substantial economic losses due to animal mortality and lost productivity worldwide. To combat PrV, eradication programs using PrV strains lacking the gene encoding glycoprotein E (gE) are ongoing in several countries. These eradication programs have generated a currently unmet demand for affordable, easy-to-use, and sensitive tests that can detect PrV infection in pigs infected with either wild-type virus or vaccine strain (gE-deleted) virus. To meet this demand, we used the baculovirus-insect cell system to produce recombinant glycoprotein B (gB) as antigen for an immune assay. The high GC-content (70% average) of the gB gene from the Argentinian PrV CL15 strain necessitated the use of betaine as a PCR enhancer to amplify the extracellular domain. Recombinant gB was expressed at high levels and reacted strongly with sera from PrV infected pigs. We used the recombinant gB to develop an agar gel immunodiffusion (AGID) test for detection of PrV antibodies. Compared to the gold standard virus neutralization (VN) assay, the AGID sensitivity and specificity were 95% and 96.6% respectively. Thus, recombinant gB produced in the baculovirus-insect cell system is a viable source of antigen for the detection of PrV antibodies in AGID tests. Considering its relatively lower cost, simplicity of use and result interpretation, our AGID is a valuable alternative tool to the VN assay. PMID:26800775

  13. Improving agar electrospinnability with choline-based deep eutectic solvents.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-09-01

    Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up. One weight percent agar-in-DES showed improved viscoelasticity and hence, spinnability, when compared to 1 wt% agar-in-water and pure agar nanofibers were successfully electrospun if working above the temperature of sol-gel transition (∼80 °C). By changing the solvent medium we decreased the PVA concentration (5 wt% starting solution) and successfully produced composite fibers with high agar contents (50/50 agar/PVA). Best composite fibers were formed with the 50/50 and 30/70 agar/PVA solutions. These fibers were mechanically resistant, showed tailorable surface roughness and diverse size distributions, with most of the diameters falling in the sub-micron range. Both nano and micro forms of agar fibers (used separately or combined) may have potential for the design of new and highly functional agar-based materials. PMID:26116384

  14. Evaluation of the Double Agar Gel Immunodiffusion Test and of the Enzyme-Linked Immunosorbent Assay in the Diagnosis and Follow-Up of Patients with Chronic Pulmonary Aspergillosis

    PubMed Central

    de Azevedo, Priscila Zacarias; Sylvestre, Tatiane Fernanda; Cavalcante, Ricardo de Souza; de Carvalho, Lídia Raquel; Moris, Daniela Vanessa; de Oliveira, Maria Luiza Cotrim Sartor; Mendes, Rinaldo Poncio

    2015-01-01

    The diagnosis of chronic pulmonary aspergillosis (CPA) depends on the radiologic image and the identification of specific antibodies. The present study aimed to evaluate accuracy parameters of enzyme-linked immunosorbent assay (ELISA) and of the determination of serum galactomannan level in the diagnosis of patients with CPA, comparing these results with the double agar gel immunodiffusion (DID) test. In addition, the prevalence of cross-reactivity and the serological progression after treatment were evaluated by comparing DID and ELISA. Six study groups were formed: G1: 22 patients with CPA, 17 of whom had Aspergillus fungus ball, one chronic cavitary pulmonary aspergillosis (CCPA) and four chronic fibrosing pulmonary aspergillosis (CFPA); G2: 28 patients with pulmonary tuberculosis (TB); G3: 23 patients with histoplasmosis (HST); G4: 50 patients with paracoccidioidomycosis (PCM); G5: 20 patients with cryptococcosis (CRC); and G6: 200 healthy controls. Serum antibodies were measured by DID and ELISA, with two antigen preparations—Aspergillus fumigatus (DID1, ELISA1) and a pool of A. fumigatus, A. flavus and A. niger antigens (DID2, ELISA2). The Platélia Aspergillus Enzyme Immunoassay (EIA) kit was used to measure galactomannan. The cut-off points of ELISA were determined for each antigen preparation and for the 95% and 99% confidence intervals. Despite the low sensitivity, DID was the technique of choice due to its specificity, positive and negative predictive values and positive likelihood ratio–especially with the antigen pool and due to the low frequency of cross-reactivity. ELISA1 and a 0.090 cut-off showed high sensitivity, specificity and negative predictive value, but a high frequency of cross-reactivity with CRC. The best degree of agreement was observed between ELISA1 and ELISA2. The detection of serum galactomannan showed high sensitivity, comparable to ELISA2. The immunodiffusion test showed an excellent relationship with the progression after

  15. Dielectric properties and electrical conductivity of MgO synthesized by chemical precipitation and sol-gel method

    NASA Astrophysics Data System (ADS)

    Mbarki, Rabeh; Hichem Hamzaoui, Ahmed; Mnif, Adel

    2015-01-01

    MgO Powders were synthesized via simple chemical precipitation (SPC) and sol-gel process (SG). The electrical behavior of these powders was determined by complex impedance spectroscopy using an alternative current conductivity at various temperatures and frequencies. For MgO elaborated by SG, the activation energy is 1.49 eV while MgO prepared by SPC, this energy is equal to 0.39 and 4.13 eV. The structural properties of MgO powders were analyzed by X-ray diffraction and FT-IR spectroscopy. The results show that the cristallites size was 28.4 nm for MgO SPC and 42.5 nm for MgO SG. Others methods such DTA, TGA, BET and SEM were used to characterized MgO materials.

  16. Structure of yttria stabilized zirconia beads produced by gel supported precipitation

    SciTech Connect

    Walter, M.; Somers, J.; Fernandez, A.; Specht, Eliot D; Hunn, John D; Boulet, P.; Denecke, M. A.; Gobel, C.

    2007-01-01

    Yttria stabilized zirconia (YSZ) is one of the inert matrix candidates selected for investigation as host matrix for minor actinide (MA) transmutation. The structural properties of (Zr0.84, Y0.16)O1.92 beads prepared by a sol-gel method for MA infiltration, are characterized as calcined (850 C) and sintered (1,600 C) beads. The calcined YSZ beads are fine-grained and homogenous over the entire sphere and are surrounded by a uniform outer layer of approximately 30 {micro}m thickness. After sintering at 1,600 C, the beads are compacted to 51% of their initial volume and exhibit a granular structure. The thermal expansion is nearly linear for the calcined material, but shows a parabolic behavior for the sintered (1,400 C) beads. In addition, the thermal expansion of calcined material is 20-25% less than after sintering. During heating up to 1,400 C, two processes can be distinguished. The first occurs between 900 and 1,000 C and is related to an increase in unit cell order. The second process involves grain-growth of the less crystalline calcined material between 1,100 and 1,300 C. These results have implications for preparation of YSZ and its use as an inert MA transmutation matrix.

  17. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  18. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS §...

  19. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific Substances Affirmed as GRAS § 184.1115...

  20. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of...

  1. 21 CFR 184.1115 - Agar-agar.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Agar-agar. 184.1115 Section 184.1115 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DIRECT FOOD... ingredient meets the specifications of the “Food Chemicals Codex,” 3d Ed. (1981), p. 11, which...

  2. Automatic agar tray inoculation device

    NASA Technical Reports Server (NTRS)

    Wilkins, J. R.; Mills, S. M.

    1972-01-01

    Automatic agar tray inoculation device is simple in design and foolproof in operation. It employs either conventional inoculating loop or cotton swab for uniform inoculation of agar media, and it allows technician to carry on with other activities while tray is being inoculated.

  3. An Optimized Trichloroacetic Acid/Acetone Precipitation Method for Two-Dimensional Gel Electrophoresis Analysis of Qinchuan Cattle Longissimus Dorsi Muscle Containing High Proportion of Marbling

    PubMed Central

    Hao, Ruijie; Adoligbe, Camus; Jiang, Bijie; Zhao, Xianlin; Gui, Linsheng; Qu, Kaixing; Wu, Sen; Zan, Linsen

    2015-01-01

    Longissimus dorsi muscle (LD) proteomics provides a novel opportunity to reveal the molecular mechanism behind intramuscular fat deposition. Unfortunately, the vast amounts of lipids and nucleic acids in this tissue hampered LD proteomics analysis. Trichloroacetic acid (TCA)/acetone precipitation is a widely used method to remove contaminants from protein samples. However, the high speed centrifugation employed in this method produces hard precipitates, which restrict contaminant elimination and protein re-dissolution. To address the problem, the centrifugation precipitates were first grinded with a glass tissue grinder and then washed with 90% acetone (TCA/acetone-G-W) in the present study. According to our result, the treatment for solid precipitate facilitated non-protein contaminant removal and protein re-dissolution, ultimately improving two-dimensional gel electrophoresis (2-DE) analysis. Additionally, we also evaluated the effect of sample drying on 2-DE profile as well as protein yield. It was found that 30 min air-drying did not result in significant protein loss, but reduced horizontal streaking and smearing on 2-DE gel compared to 10 min. In summary, we developed an optimized TCA/acetone precipitation method for protein extraction of LD, in which the modifications improved the effectiveness of TCA/acetone method. PMID:25893432

  4. Fastidious anaerobe agar compared with Wilkins-Chalgren agar, brain heart infusion agar, and brucella agar for susceptibility testing of Fusobacterium species.

    PubMed

    Brazier, J S; Goldstein, E J; Citron, D M; Ostovari, M I

    1990-11-01

    Fastidious anaerobe agar supported the growth of 82 strains of fusobacteria better than brain heart infusion agar, brucella agar, and Wilkins-Chalgren agar. Fastidious anaerobe agar showed less hazing and fewer tailing endpoints with beta-lactam antibiotics. Whole-blood supplementation improved the performance of all media. Wilkins-Chalgren agar without blood failed to support the growth of 17% of the strains. All Fusobacterium ulcerans strains were resistant to clindamycin. PMID:2073122

  5. 48 CFR 401.371 - AGAR Advisories.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false AGAR Advisories. 401.371... ACQUISITION REGULATION SYSTEM Agency Acquisition Regulations 401.371 AGAR Advisories. The SPE may issue AGAR Advisories, consistent with the policies of the FAR and the AGAR, for the following purposes: (a)...

  6. 48 CFR 401.371 - AGAR Advisories.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false AGAR Advisories. 401.371... ACQUISITION REGULATION SYSTEM Agency Acquisition Regulations 401.371 AGAR Advisories. The SPE may issue AGAR Advisories, consistent with the policies of the FAR and the AGAR, for the following purposes: (a)...

  7. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus.

    PubMed

    Laarhoven, Bob; Elissen, H J H; Temmink, H; Buisman, C J N

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

  8. Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus

    PubMed Central

    Laarhoven, Bob; Elissen, H. J. H.; Temmink, H.; Buisman, C. J. N.

    2016-01-01

    An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

  9. Facile Synthesis of Radial-Like Macroporous Superparamagnetic Chitosan Spheres with In-Situ Co-Precipitation and Gelation of Ferro-Gels

    PubMed Central

    Yang, Chih-Hui; Wang, Chih-Yu; Huang, Keng-Shiang; Yeh, Chen-Sheng; Wang, Andrew H. -J.; Wang, Wei-Ting; Lin, Ming-Yu

    2012-01-01

    Macroporous chitosan spheres encapsulating superparamagnetic iron oxide nanoparticles were synthesized by a facile and effective one-step fabrication process. Ferro-gels containing ferrous cations, ferric cations and chitosan were dropped into a sodium hydroxide solution through a syringe pump. In addition, a sodium hydroxide solution was employed for both gelation (chitosan) and co-precipitation (ferrous cations and ferric cations) of the ferro-gels. The results showed that the in-situ co-precipitation of ferro-ions gave rise to a radial morphology with non-spheroid macro pores (large cavities) inside the chitosan spheres. The particle size of iron oxide can be adjusted from 2.5 nm to 5.4 nm by tuning the concentration of the sodium hydroxide solution. Using Fourier Transform Infrared Spectroscopy and X-ray diffraction spectra, the synthesized nanoparticles were illustrated as Fe3O4 nanoparticles. In addition, the prepared macroporous chitosan spheres presented a super-paramagnetic behaviour at room temperature with a saturation magnetization value as high as ca. 18 emu/g. The cytotoxicity was estimated using cell viability by incubating doses (0∼1000 µg/mL) of the macroporous chitosan spheres. The result showed good viability (above 80%) with alginate chitosan particles below 1000 µg/mL, indicating that macroporous chitosan spheres were potentially useful for biomedical applications in the future. PMID:23226207

  10. A new single source molecular precursor for synthesis of ZrO2/Pb3O4 nanocomposite by co-precipitation enhanced sol—gel method

    NASA Astrophysics Data System (ADS)

    Ullah, Hameed; Sultan, Nabeela; Akhtar, Zareen

    2015-04-01

    A new heterometal-pseudo-alkoxide, [(bpy)Cl2Pb(μ-OtBu)2ZrCl2(THF)2], compound was developed, and applied as single source molecular precursor (SSP) for the synthesis of ZrO2/Pb3O4 nanocomposite employing co-precipitation enhanced sol-gel method. The SSP has been obtained in the form of monomer in which the metallic centers are bridged through the oxygen atom of the tert-butoxy group. The bipyridyl (bpy) and tetrahydroduran (THF), respectively, coordinated to the lead (Pb) and zirconium (Zr) centers contain the degree of polymerization of the bimetallic molecule. The chlorides present as terminal groups are balancing the overall charge of the molecule. The thermal decomposition pattern of the SSP was established by TGA analysis (equation (1)). The molecular SSP was hydrolyzed by adding an equimolar amount of water and the powder was precipitated at pH = 10 adding NH4OH solution as co-precipitating agent. The analytical techniques, i.e. XRD, SEM, EDX and IR spectroscopy, were used to find the composition, phase, and morphology of the resulting powder. The post sintering (400 °C) sample was confirmed as ZrO2/Pb3O4 nanocomposite. However, the pre-sintering material was amorphous. The pre- and post-sintering samples have rod-shaped nanoparticles. The latter have thinner nanorods than the former.

  11. Agar-agar entrapment increases the stability of endo-β-1,4-xylanase for repeated biodegradation of xylan.

    PubMed

    Bibi, Zainab; Shahid, Faiza; Ul Qader, Shah Ali; Aman, Afsheen

    2015-04-01

    Microbial xylanases, specially endo-β-1,4-xylanase catalyzes the hydrolysis of xylan, is considered one of the most significant hydrolases. It has numerous applications but most extensively is utilized in paper and pulp industry as a bio-bleaching agent. Immobilization technique is comprehensively studied with the expectation of modifying and improving enzyme stability and characteristics for commercial purposes. Currently, matrix entrapment technique is applied to immobilize endo-β-1,4-xylanase within agar-agar gel beads produced by Geobacillus stearothermophilus KIBGE-IB29. Maximal enzyme immobilization yield was achieved at 2.5% of agar-agar concentration. Optimized conditions demonstrated an increase in the optimal reaction time from 05 min to 30 min and incubation temperature from 50 °C to 60 °C with reference to free enzyme whereas; no effect was observed for optimum pH. Entrapment technique uniquely changed the kinetic parameters of immobilized endo-β-1,4-xylanase (Km: 0.5074 mg min(-1) to 0.5230 mg min(-1) and Vmax: 4773 U min(-1) to 968 U min(-1)) as compared to free enzyme. However, immobilized enzyme displayed broad thermal stability and retained 79.0% of its initial activity at 80 °C up to 30 min whereas; free enzyme completely lost its activity at this temperature. With respect to economic feasibility, the immobilized enzyme showed impressive recycling efficiency up to six reaction cycles. PMID:25603143

  12. Crystal formation in furunculosis agar

    USGS Publications Warehouse

    Bullock, G.L.; Ross, A.J.

    1964-01-01

    SINCE ITS INTRODUCTION SOME MONTHS AGO, FURUNCULOSIS AGAR has been employed in the diagnosis of suspect furunculosis and also as a general purpose medium. During our work with this medium we have noticed discrete "colonies," of crystalline material, which very closely resemble microbial colonies. These crystal colonies are compact and appear on both the surface and subsurface; they occur in inoculated slants and plates incubated for long periods (2 to 3 weeks), as well as in uninoculated stored medium. As the crystal colonies could be confusing to workers using this medium, we decided to attempt to identify them and also to determine whether storage conditions and different lots of medium affect crystal formation.

  13. Effects of season on the yield and quality of agar from Gracilaria species (Gracilariaceae, Rhodophyta).

    PubMed

    Marinho-Soriano, E; Bourret, E

    2003-12-01

    The effect of season on yield and physical properties of agars extracted from Gracia gracilis and G. bursa-pastoris were determined. The agar yield from G. gracilis was maximum during spring (30%) and minimum during autumn (19%). In G. bursa-pastoris, the agar yield was greatest in summer (36%) and lowest in winter (23%). Agar yield from G. bursa-pastoris was positively correlated with temperature (r=0.94; P<0.01) and salinity (r=0.97; P<0.01) and negatively with nitrogen content (r=-0.93; P<0.01). Agar gel strengths fluctuated from 229 to 828 gcm(-2) and 23 to 168 gcm(-2) for G. gracilis and G. bursa-pastoris, respectively. The gelling temperature showed significant seasonal variation for both species. Chemical analysis of agar from the two seaweeds indicated variation in 3,6-anhydrogalactose and sulfate content (P<0.01). Furthermore, there was an inverse correlation between the two chemical variables. In general, agar extracted from G. gracilis possessed better qualities than agar extracted from G. bursa-pastoris and can be considered a candidate for industrial use. PMID:14575957

  14. Sucrose release from polysaccharide gels.

    PubMed

    Nishinari, Katsuyoshi; Fang, Yapeng

    2016-05-18

    Sucrose release from polysaccharide gels has been studied extensively because it is expected to be useful in understanding flavour release from solid foods and to find a new processing method which produces more palatable and healthier foods. We provide an overview of the release of sucrose and other sugars from gels of agar and related polysaccharides. The addition of sucrose to agar solutions leads to the increase in transparency of the resulting gels and the decrease in syneresis, which is attributed to the decrease in mesh size in gels. The syneresis occurring in the quiescent condition and fluid release induced by compression is discussed. The relationship between the sugar release and the structural, rheological and thermal properties of gels is also discussed. Finally, the future research direction is proposed. PMID:26952168

  15. Quantification of PEGylated proteases with varying degree of conjugation in mixtures: An analytical protocol combining protein precipitation and capillary gel electrophoresis.

    PubMed

    Morgenstern, Josefine; Busch, Markus; Baumann, Pascal; Hubbuch, Jürgen

    2016-09-01

    PEGylation, i.e. the covalent attachment of chemically activated polyethylene glycol (PEG) to proteins, is a technique commonly used in biopharmaceutical industry to improve protein stability, pharmacokinetics and resistance to proteolytic degradation. Therefore, PEGylation represents a valuable strategy to reduce autocatalysis of biopharmaceutical relevant proteases during production, purification and storage. In case of non-specific random conjugation the existence of more than one accessible binding site results in conjugates which vary in position and number of attached PEG molecules. These conjugates may differ considerably in their physicochemical properties. Optimizing the reaction conditions with respect to the degree of PEGylation (number of linked PEG molecules) using high-throughput screening (HTS) technologies requires a fast and reliable analytical method which allows stopping the reaction at defined times. In this study an analytical protocol for PEGylated proteases is proposed combining preservation of sample composition by trichloroacetic acid (TCA) precipitation with high-throughput capillary gel electrophoresis (HT-CGE). The well-studied protein hen egg-white lysozyme served as a model system for validating the newly developed analytical protocol for 10kDa mPEG-aldehyde conjugates. PEGamer species were purified by chromatographic separation for calibrating the HT-CGE system. In a case study, the serine protease Savinase(®) which is highly sensitive to autocatalysis was randomly modified with 5kDa and 10kDa mPEG-aldehyde and analyzed. Using the presented TCA protocol baseline separation between PEGamer species was achieved allowing for the analysis of heterogeneous PEGamer mixtures while preventing protease autocatalysis. PMID:27521256

  16. Novel grafted agar disks for the covalent immobilization of β-D-galactosidase.

    PubMed

    Wahba, Marwa I; Hassan, Mohamed E

    2015-12-01

    Novel grafted agar disks were prepared for the covalent immobilization of β-D-galactosidase (β-gal). The agar disks were activated through reacting with ethylenediamine or different molecular weights of Polyethyleneimine (PEI), followed by glutaraldehyde (GA). The modification of the agar gel and the binding of the enzyme were verified by Fourier Transform Infrared (FTIR) and elemental analysis. Moreover, the agar's activation process was optimized, and the amount of immobilized enzyme increased 3.44 folds, from 38.1 to 131.2 U/g gel, during the course of the optimization process. The immobilization of β-gal onto the activated agar disks caused its optimum temperature to increase from 45°C to 45-55°C. The optimum pH of the enzyme was also shifted towards the acidic side (3.6-4.6) after its immobilization. Additionally, the Michaelis-Menten constant (Km ) increased for the immobilized β-gal as compared to its free counterpart whereas the maximum reaction rate (Vmax ) decreased. The immobilized enzyme was also shown to retain 92.99% of its initial activity after being used for 15 consecutive times. PMID:26043937

  17. Disk Agar Diffusion Susceptibility Testing of Yeasts

    PubMed Central

    Saubolle, Michael A.; Hoeprich, Paul D.

    1978-01-01

    A disk agar diffusion method was developed for testing the susceptibility of rapidly growing yeasts in vitro. A totally defined, completely synthetic agar culture medium (synthetic amino acid medium, fungal) and clinical isolates of Candida spp. and Torulopsis glabrata were used. Turbidimetric adjustment of cell suspensions resulted in standard, reproducible inocula, which gave sharp, clear zones of inhibition when applied by an agar overlay method. Optimal disk loads were determined for amphotericin B, amphotericin B methyl ester, 5-fluorocytosine, clotrimazole, and miconazole. Disk potencies were stable over a 2-month period when stored in a vacuum desiccator at −30°C. Using an error ratebounded classification, the zones of inhibition were correlated with both broth dilution and agar dilution minimum inhibitory concentrations (MICs). With amphotericin B and amphotericin B methyl ester, all isolates were susceptible, yielding zone diameters which clustered within 5 mm. Overall correlations between zone diameters and broth dilution MICs with 5-fluorocytosine, miconazole, and clotrimazole were 97, 96, and 82% (excluding T. glabrata), respectively; correlations of zone diameters with agar dilution MICs were 96, 92, and 88%, respectively. Disk diffusion susceptibility testing of yeasts appears to be generally applicable. However, when results are equivocal, quantitative test methods should be used. PMID:568910

  18. Agar agar-stabilized milled zerovalent iron particles for in situ groundwater remediation.

    PubMed

    Velimirovic, Milica; Schmid, Doris; Wagner, Stephan; Micić, Vesna; von der Kammer, Frank; Hofmann, Thilo

    2016-09-01

    Submicron-scale milled zerovalent iron (milled ZVI) particles produced by grinding macroscopic raw materials could provide a cost-effective alternative to nanoscale zerovalent iron (nZVI) particles for in situ degradation of chlorinated aliphatic hydrocarbons in groundwater. However, the aggregation and settling of bare milled ZVI particles from suspension presents a significant obstacle to their in situ application for groundwater remediation. In our investigations we reduced the rapid aggregation and settling rate of bare milled ZVI particles from suspension by stabilization with a "green" agar agar polymer. The transport potential of stabilized milled ZVI particle suspensions in a diverse array of natural heterogeneous porous media was evaluated in a series of well-controlled laboratory column experiments. The impact of agar agar on trichloroethene (TCE) removal by milled ZVI particles was assessed in laboratory-scale batch reactors. The use of agar agar significantly enhanced the transport of milled ZVI particles in all of the investigated porous media. Reactivity tests showed that the agar agar-stabilized milled ZVI particles were reactive towards TCE, but that their reactivity was an order of magnitude less than that of bare, non-stabilized milled ZVI particles. Our results suggest that milled ZVI particles could be used as an alternative to nZVI particles as their potential for emplacement into contaminated zone, their reactivity, and expected longevity are beneficial for in situ groundwater remediation. PMID:26596889

  19. Pigments of fly agaric (Amanita muscaria).

    PubMed

    Stintzing, Florian; Schliemann, Willibald

    2007-01-01

    The complex pigment pattern of fly agaric (Amanita muscaria) cap skins has been studied by LC-DAD and mass spectrometry. Among the betaxanthins the corresponding derivatives of serine, threonine, ethanolamine, alanine, Dopa, phenylalanine and tryptophan are reported for the first time to contribute to the pigment pattern of fly agarics. Betalamic acid, the chromophoric precursor of betaxanthins and betacyanins, muscaflavin and seco-dopas were also detected. Furthermore, the red-purple muscapurpurin and the red muscarubrin were tentatively assigned while further six betacyanin-like components could not be structurally allocated. Stability studies indicated a high susceptibility of pigment extracts to degradation which led to rapid colour loss thus rendering a complete characterization of betacyanin-like compounds impossible at present. Taking into account these difficulties the presented results may be a starting point for a comprehensive characterization of the pigment composition of fly agarics. PMID:18274277

  20. Standard operating procedure to prepare agar phantoms

    NASA Astrophysics Data System (ADS)

    Souza, R. M.; Santos, T. Q.; Oliveira, D. P.; Souza, R. M.; Alvarenga, A. V.; Costa-Felix, R. P. B.

    2016-07-01

    Agar phantoms are widely used as soft tissue mimics and some preparation techniques are described in the literature. There are also standards that describe the recipe of a soft tissue mimicking material (TMM). However some details of manufacture process are not clearly defined. The standardization of the phantom's preparation can produce a metrological impact on the results of the acoustic properties measured. In this direction, this paper presents a standard operating procedure (SOP) to prepare the agar TMM described on the IEC 60601-237.

  1. Use of agar agar stabilized milled zero-valent iron particles for in situ groundwater remediation

    NASA Astrophysics Data System (ADS)

    Schmid, Doris; Velimirović, Milica; Wagner, Stephan; Micić Batka, Vesna; von der Kammer, Frank; Hofmann, Thilo

    2015-04-01

    A major obstacle for use of nanoscale zero-valent iron (nZVI) particles as a nontoxic material for effective in situ degradation of chlorinated aliphatic hydrocarbons (CAHs) is the high production cost. For that reason, submicro-scale milled zero-valent iron particles were recently developed (milled ZVI, UVR-FIA, Germany) by grinding macroscopic raw materials of elementary iron as a cheaper alternative to products produced by solid-state reduction. However, milled ZVI particles tend to aggregate and due to the rather large particle size (d50= 11.9 µm) also rapidly sediment. To prevent aggregation and consequently sedimentation of milled ZVI particles and therefore improve the mobility after in situ application, the use of a stabilizer is considered in literature as a most promising option. In this study, milled ZVI particles (1 g L-1 of particle concentration) were stabilized by environmentally friendly polymer agar agar (>0.5 g L-1), which had a positive impact on the milled ZVI stability. Sedimentation rate was significantly decreased by increasing the suspension viscosity. Column transport experiments were performed for bare and agar agar stabilized milled ZVI particles in commercially available fine grained quartz sand (DORSILIT® Nr.8, Gebrüder Dorfner GmbH Co, Germany) and different porous media collected from brownfields. The experiments were carried out under field relevant injection conditions of 100 m d-1. The maximal travel distance (LT) of less than 10 cm was determined for non-stabilized suspension in fine grained quartz sand, while agar agar (1 g L-1) stabilized milled ZVI suspension revealed LT of 12 m. Similar results were observed for porous media from brownfields showing that mobility of agar agar stabilized particle suspensions was significantly improved compared to bare particles. Based on the mobility data, agar agar stabilized milled zero-valent iron particles could be used for in situ application. Finally, lab-scale batch degradation

  2. Diffusion of Methylene Blue in Phantoms of Agar Using a Photoacoustic Technique

    NASA Astrophysics Data System (ADS)

    Vilca-Quispe, L.; Alvarado-Gil, J. J.; Quintana, P.; Ordonez-Miranda, J.

    2010-05-01

    In this work, the kinetics of diffusion of methylene blue in agar aqueous solution is studied using a photoacoustic technique. Two agar phantoms solutions in water with a relation of mass/volume of 0.01% and 0.05% were analyzed. The study was performed using a modified Rosencwaig photoacoustic cell that is enclosed by transparent windows, on both sides. The sample is deposited directly on top of the upper window. A red light beam, at a fixed modulation frequency, is sent through the lower window illuminating the sample and inducing the photoacoustic effect inside the closed chamber of the cell. At the beginning of the experiment, a droplet of 100μL of agar solution is deposited; afterwards, the signal stabilizes, and 10μL of methylene blue aqueous solution (0.0125 g · mL-1) is added to the surface of the agar. During the first seconds of the experiment, the photoacoustic signal amplitude increases followed by a gradual and long decay. Results for modulation frequencies in the range from 10Hz to 80Hz for both agar concentrations are presented. A simple theoretical approach is presented to analyze the experimental data. It is demonstrated that the kinetics of the process can be parameterized as a function of the changes of an effective optical absorption coefficient. From these results, the characteristic time, in which the dye diffusion process stabilizes, is obtained. It is found that this time is larger for samples with a higher agar concentration. These differences provide important results for biomedical sciences in which agar gels are used as phantoms resembling some of the properties of living organs and tissues.

  3. Infrared thermography analysis of thermal diffusion induced by RF magnetic field on agar phantoms loaded with magnetic nanoparticles

    NASA Astrophysics Data System (ADS)

    Bante-Guerra, Jose; Macías, J. D.; Caballero-Aguilar, L.; Vales-Pinzón, C.; Alvarado-Gil, J. J.

    2013-02-01

    Recently, several treatments for fighting malignant tumors have been designed. However these procedures have well known inconveniences, depending on their applicability, tumor size and side effects, among others. Magnetic hyperthermia is a safe, non-invasive method for cancer therapy. This treatment is applied via elevation of target tissue temperature by dissipation of heat from Magnetic Nanoparticles (MNPs), previously located within the tumor. The induction of heat causes cell death and therefore the removal of the tumor. In this work the thermal diffusion in phantoms of agar loaded with magnetic nanoparticles (MNPs) is studied using the infrared thermography technique, which is widely used in biology/medicine (e.g. skin temperature mapping). Agar is one of the materials used to simulate different types of body tissues, these samples are known as "phantoms". Agar is of natural origin, low cost and high degree of biocompatibility. In this work the agar gel was embedded with MNPs by coprecipitation and placed in an alternating magnetic field radiation. As a consequence, the energy from the radiation source is dissipated as heat and then transferred from the MNP to the gel, increasing its temperature. For the temperature analysis, the samples of agar gel were stimulated by RF magnetic field generated by coils. Heating was measured with infrared thermography using a Thermovision A20M infrared camera. Thermographic images allowed obtaining the dependence of thermal diffusion in the phantom as a function of the magnitude of the applied RF magnetic field and the load of magnetic particles.

  4. Strain-Specific Ureolytic Microbial Calcium Carbonate Precipitation

    PubMed Central

    Hammes, Frederik; Boon, Nico; de Villiers, Johan; Verstraete, Willy; Siciliano, Steven Douglas

    2003-01-01

    During a study of ureolytic microbial calcium carbonate (CaCO3) precipitation by bacterial isolates collected from different environmental samples, morphological differences were observed in the large CaCO3 crystal aggregates precipitated within bacterial colonies grown on agar. Based on these differences, 12 isolates were selected for further study. We hypothesized that the striking differences in crystal morphology were the result of different microbial species or, alternatively, differences in the functional attributes of the isolates selected. Sequencing of 16S rRNA genes showed that all of the isolates were phylogenetically closely related to the Bacillus sphaericus group. Urease gene diversity among the isolates was examined by using a novel application of PCR-denaturing gradient gel electrophoresis (DGGE). This approach revealed significant differences between the isolates. Moreover, for several isolates, multiple bands appeared on the DGGE gels, suggesting the apparent presence of different urease genes in these isolates. The substrate affinities (Km) and maximum hydrolysis rates (Vmax) of crude enzyme extracts differed considerably for the different strains. For certain isolates, the urease activity increased up to 10-fold in the presence of 30 mM calcium, and apparently this contributed to the characteristic crystal formation by these isolates. We show that strain-specific calcification occurred during ureolytic microbial carbonate precipitation. The specificity was mainly due to differences in urease expression and the response to calcium. PMID:12902285

  5. Luminescent DNA- and agar-based membranes.

    PubMed

    Leones, R; Fernandes, M; Ferreira, R A S; Cesarino, I; Lima, J F; Carlos, L D; Bermudez, V de Zea; Magon, C J; Donoso, J P; Silva, M M; Pawlicka, A

    2014-09-01

    Luminescent materials containing europium ions are investigated for different optical applications. They can be obtained using bio-macromolecules, which are promising alternatives to synthetic polymers based on the decreasing oil resources. This paper describes studies of the DNA- and Agar-europium triflate luminescent membranes and its potential technological applications are expanded to electroluminescent devices. Polarized optical microscopy demonstrated that the samples are birefringent with submicrometer anisotropy. The X-ray diffraction analysis revealed predominantly amorphous nature of the samples and the atomic force microscopy images showed a roughness of the membranes of 409.0 and 136.1 nm for the samples of DNA10Eu and Agar1.11Eu, respectively. The electron paramagnetic resonance spectra of the DNA(n)Eu membranes with the principal lines at g ≈ 2.0 and g ≈ 4.8 confirmed uniform distribution of rare earth ions in a disordered matrix. Moreover, these strong and narrow resonance lines for the samples of DNA(n)Eu when compared to the Agar(n)Eu suggested a presence of paramagnetic radicals arising from the DNA matrix. The emission spectra suggested that the Eu3+ ions occupy a single local environment in both matrices and the excitation spectra monitored around the Eu emission lines pointed out that the Eu3+ ions in the Agar host were mainly excited via the broad band component rather than by direct intra-4f(6) excitation, whereas the opposite case occurred for the DNA-based sample. PMID:25924317

  6. Pulsed photothermal temperature profiling of agar tissue phantoms.

    PubMed

    Milanic, Matija; Majaron, Boris; Nelson, J Stuart

    2007-11-01

    We determine experimentally the accuracy of pulsed photothermal radiometric (PPTR) temperature depth profiling in water-based samples. We use custom tissue phantoms composed of agar gel layers separated by very thin absorbing layers. Two configurations of the acquisition system are compared, one using the customary spectral band of the InSb radiation detector (3.0-5.5 microm) and the other with a spectrally narrowed acquisition band (4.5-5.5 microm). The laser-induced temperature depth profiles are reconstructed from measured radiometric signals using a custom minimization algorithm. The results correlate very well with phantom geometry as determined by optical coherence tomography (OCT) and histology in all evaluated samples. Determination of the absorbing layer depth shows good repeatability with spatial resolution decreasing with depth. Spectral filtering improves the accuracy and resolution, especially for shallow absorption layers (~120 microm) and more complex structures (e.g., with two absorbing layers). The average full width at half maximum (FWHM) of the temperature peaks equals 23% of the layer depth. PMID:17522951

  7. Biological treatment of textile dyes by agar-agar immobilized consortium in a packed bed reactor.

    PubMed

    Patel, Yogesh; Gupte, Akshaya

    2015-03-01

    The decolorization of Acid Maroon V was investigated using bacterial consortium EDPA containing Enterobacter dissolvens AGYP1 and Pseudomonas aeruginosa AGYP2 immobilized in different entrapment matrices. The consortium displayed 96% removal of dye (100 mg/l) within 6 h when immobilized in agar-agar. Under optimum concentrations of agar-agar (3.0% w/v) and cell biomass (0.9 g% w/v), the consortium displayed decolorization for 18 successive batches of Acid Maroon V and also decolorized 14 other different textile dyes. A packed bed reactor under batch mode showed 89% decolorization of dye after 56 repetitive cycles. Under continuous flow mode, maximum color removal was achieved with bed length of 36 cm, hydraulic retention time of 2.66 h, and dye concentration of 100 mg/l. Additionally, the reactor decolorized relatively higher concentrations (100-2000 mg/l) of dye. The synthetic dye wastewater containing five textile dyes was decolorized 92% with 62% COD reduction using an immobilized consortium. PMID:25842535

  8. Screening fungicides for use in fish culture: Evaluation of the agar plug transfer, cellophane transfer, and agar dilution methods

    USGS Publications Warehouse

    Bailey, Tom A.

    1983-01-01

    The reliability, reproducibility, and usefulness of three screening methods -- the cellophane transfer, the agar plug transfer, and the agar dilution -- to screen aquatic fungicides were evaluated. Achlya flagellata and Saprolegnia hypogyna were exposed to 1, 10, and 100 mg/L of malachite green to test each method. The cellophane transfer and agar plug transfer techniques had similar reliability and reproducibility in rating fungicidal activity, and were both superior to the agar dilution technique. The agar plug transfer and agar dilution techniques adequately projected in vivo activity of malachite green, but the cellophane transfer technique overestimated its activity. Overall, the agar plug transfer technique most accurately rated the activity of malachite green and was the easiest test to perform. It therefore appears to be the method of choice for testing aquatic fungicides.

  9. Recovery of spores of Clostridium botulinum in yeast extract agar and pork infusion agar after heat treatment.

    PubMed

    Odlaug, T E; Pflug, I J

    1977-10-01

    Yeast extract agar, pork infusion agar, and modifications of these media were used to recover heated Clostridium botulinum spores. The D- and z-values were determined. Two type A strains and one type B strain of C. botulinum were studied. In all cases the D-values were largest when the spores were recovered in yeast extract agar, compared to the D-values for spores recovered in pork infusion agar. The z-values for strains 62A and A16037 were largest when the spores were recovered in pork infusion agar. The addition of sodium bicarbonate and sodium thioglycolate to pork infusion agar resulted in D-values for C. botulinum 62A spores similar to those for the same spores recovered in yeast extract agar. The results suggest that sodium bicarbonate and sodium thioglycolate should be added to recovery media for heated C. botulinum spores to obtain maximum plate counts. PMID:335970

  10. Automatic Surface Inoculation of Agar Trays1

    PubMed Central

    Wilkins, Judd R.; Mills, Stacey M.; Boykin, Elizabeth H.

    1972-01-01

    A machine is described which automatically inoculates a plastic tray containing agar media with a culture by use of either a conventional inoculating loop or a cotton swab. Isolated colonies were obtained with an inoculating loop when a heavy inoculum (109 cells/ml) was used or with a cotton swab when a light inoculum (ca. 104 cells/ml) was used. Trays containing combinations of differential or selective media were used to (i) separate mixtures of gram-positive and gram-negative bacteria, (ii) facilitate isolation of organisms from clinical specimens, and (iii) compare colony growth characteristics of pure cultures. The design of the machine is simple, it is easy to use, and it relieves the operator from the manual task of streaking cultures. Images PMID:16349943

  11. Poisoning with brown fly agaric, Amanita regalis.

    PubMed

    Elonen, E; Tarssanen, L; Härkönen, M

    1979-01-01

    Three patients ate different amounts of a common northern mushroom, brown fly agaric, Amanita regalis. All of them believed they had eaten delicious parasol mushrooms, Macrolepiota procera. The symptoms of poisoning began 1--2 hours after ingestion of the mushrooms. All the patients had marked gastrointestinal symptoms: nausea and heavy vomiting. Two had central nervous system manifestations and cholinergic symptoms: hallucinations, confusion, or loss of consciousness as well as copious salivation, or sweating. All patients recovered within 4--24 hours without any damage to liver, kidneys or central nervous system. It seems that cooking the mushrooms does not completely neutralize the toxic agents of Amanita regalis. The analysis of fried mushrooms shows that it may be possible to identify mushrooms reliably from the remains of a meal. PMID:760400

  12. Chemical modification of TiO2 by H2PO{4/-}/HPO{4/2-} anions using the sol-gel route with controlled precipitation and hydrolysis: enhancing thermal stability

    NASA Astrophysics Data System (ADS)

    Elghniji, Kais; Saad, Mohamed El Khames; Araissi, Manel; Elaloui, Elimame; Moussaoui, Younes

    2014-12-01

    Two titanium phosphate materials (T p P and T h P) have been successfully synthesized by sol-gel route with controlled precipitation and hydrolysis. The T p P material was obtained from the reaction between precipitated titania and phosphate buffer solution H2PO{4/-} /HPO{4/2-} (pH = 7.3). The T p P material was prepared through hydrolysis of titanium in the presence of H2PO{4/-}/HPO{4/2}. The probable state of the phosphate anions in titania framework and their effect on the anatase-to-rutile transformation were characterized by ICP-AES, DTA-TG, 31P NMR, FT-IR, and Raman analysis HRTEM/SEM. FT-IR and 31P NMR analyses of titanium phosphate T p P calcined at low temperature showed that the phosphate species existed not only as Ti-O-P in the bulk TiO2 but also as amorphous titanium phosphates, including bidentate Ti(HPO4)2 and monodentate Ti(H2PO4)4. Increased calcination temperature only gave an enrichment of bidentate structure on the titania surface. For the T p P material, H2PO{4/-}/HPO{4/2-} anions were introduced into the initial solution, before precipitation, what promoted their lattice localization. At high temperatures, all the phosphorus inside the bulk of TiO2 migrated to the surface. The Raman analysis of both samples showed that the bidentate phosphates increased the temperature of the anatase-to-rutile phase transformation to more than 1000 °C with the formation of well crystalline TiP2O7 phase. This phenomenon was more evident for T p P sample.

  13. [Electron microscopy study of artificial vitreous gel].

    PubMed

    Ehgartner, E M; Schmut, O; Hofmann, H

    1986-04-01

    Artificial gels prepared from Cu2+-ions and hyaluronic acid were studied in the electron microscope and compared with the native vitreous body. Additionally, the authors attempted to produce transparent gels from the native constituents of the vitreous body, namely collagen and hyaluronic acid. Mixing of solutions of these constituents formed no gels but white precipitates. The ultrastructure of these precipitates was also studied in the electron microscope. PMID:3723971

  14. Development and characterisation of an agar--polyvinyl alcohol blend hydrogel.

    PubMed

    Lyons, John G; Geever, Luke M; Nugent, Michael J D; Kennedy, James E; Higginbotham, Clement L

    2009-10-01

    Numerous authors have reported on hydrogel technologies providing products suitable for applications in biomedical, personal care as well as in nano-sensor applications. Hydrogels fabricated from single polymers have been extensively investigated. However, in many cases a single polymer alone cannot meet divergent demands in terms of both properties and performance. In this work, hydrogels were prepared by physically blending the natural polymer agar with polyvinyl alcohol in varying ratios to produce a new biosynthetic polymer applicable for a variety of purposes. Hydrogen bonding was observed to take place between the polyvinyl alcohol and the agar molecules in the composite materials leading to changes in the thermal, mechanical and swelling characteristics of the composite hydrogels. The composite hydrogels exhibited a slightly higher melting temperature than pure agar (116.81 degrees C). Irreversible compressive damage was found to occur at lower strain levels during compression testing of the dehydrated samples consisting of higher PVOH concentrations. Rheological analysis of hydrated sample revealed G' values of between 5000 and 10,000 Pa for the composite blends, with gels containing higher PVOH percentages exhibiting poorer mechanical strength. PMID:19627855

  15. Selected elements in fly agaric Amanita muscaria.

    PubMed

    Falandysz, J; Kunito, T; Kubota, R; Lipka, K; Mazur, A; Falandysz, Justyna J; Tanabe, S

    2007-09-01

    Concentrations of Ag, Al, Ba, Ca, Cd, Co, Cu, Cr, Cs, Fe, Ga, Hg, K, Mg, Mn, Mo, Na, Pb, Rb, Se, Sb, Sr, V, Tl and Zn have been determined in the whole fruiting bodies, as well as separately in caps and stalks, of fly agaric collected from three geographically distant sites in northern part of Poland. The elements were determined using ICP-MS, ICP-OES, HG-AAS and CV-AAS, respectively. For elements such as Al, Ba, Cr, Fe, Ga, Mo, Mn, Pb, Sb, Sr, Tl, and V concentrations were similar in the caps and stalks, respectively, and for K, Zn, Ag, Ca, Cd, Cu, Hg, Mg, Rb and Se were greater in the caps, while for Co, Cs and Na in the stalks. For Ag, Al, Ba, Ca, Cd, Co, Cr, Cs, Fe, Ga, Hg, Mn, Mo, Pb, Rb, Sb, Sr, Tl and V concentration in the caps showed spatial variations (P<0.05), while for Cu, K, Mg, Na, Se and Zn was independent of the site. The elements such as K with median or mean in the caps between 37,000 and 43,000 microg/g.dm and Mg with 920 and 1,100 microg/g dm were most abundant. Next, within median values range from approximately 100 to 500 microg/g dm were such as Ca, Fe and Al, and in descending order they followed by Rb (100-400 microg/g dm); V, Na, Zn (50-200 microg/g dm); Cu, Mn (10-50 microg/g dm); Cd (10-20 microg/g dm); Se (5 microg/g dm); Ba (<1-3); Cr, Ag, Pb, Sr (<1-2 microg/g dm); Cs, Co, Hg (<1-1 microg/g dm); Ga (<0.5), Sb, Mo and Tl (<0.1 microg/g dm). PMID:17849303

  16. Controlling and engineering precipitation patterns.

    PubMed

    Lagzi, István

    2012-02-21

    Controlling and engineering chemical structures are the most important scientific challenges in material science. Precipitation patterns from ions or nanoparticles are promising candidates for designing bulk structure for catalysis, energy production, storage, and electronics. There are only a few procedures and techniques to control precipitation (Liesegang) patterns in gel media (e.g., using an electric field, varying the initial concentration of the electrolytes). However, those methods provide just a limited degree of freedom. Here, we provide a robust and transparent way to control and engineer Liesegang patterns by varying gel concentration and inducing impurity by addition of gelatin to agarose gel. Using this experimental method, different precipitation structures can be obtained with different width and spatial distribution of the formed bands. A new variant of a sol-coagulation model was developed to describe and understand the effect of the gel concentration and impurities on Liesegang pattern formation. PMID:22283626

  17. Drop spreading and resorbtion on gel surfaces

    NASA Astrophysics Data System (ADS)

    Banaha, Mehdi; Daerr, Adrian; Limat, Laurent

    2008-03-01

    We have studied the dynamics of liquid drops on agar gels, using a visualisation method which captures the evolution of the free surface. A first remarquable observation is that drops of water deposited on the surface do not spread, although the gel consists of up to 99.7% water and as low as 0.3% agarose. Instead, the drop slowly de-wets and resorbs into the gel which swells locally. If the deposited drop contains surfactants, the dynamics is very different. A sharp circular swelling front develops and progressively invades the whole surface. We study the propagation of this front as a function of surfactant and agarose concentration, and compare its typical properties to similar fronts appearing during mass swarming events of bacterial colonies under the same conditions. The observations reveal the complex nature of gel surface physico-chemistry and its aging, and may be related to recent friction measurements at gel interfaces.

  18. Improving immobilized biocatalysts by gel phase polymerization

    SciTech Connect

    Kuu, W.Y.; Polack, J.A.

    1983-08-01

    A new method is presented for the treatment of gel-type supports, used for immobilizing microbial cells and enzymes, to obtain high mechanical strength. It is particularly useful for ethanol fermentation over gel beads containing immobilized viable cells, where the beads can be ruptured by gas production and the growth of cells within the gels. This method consists of treating agar or carrageenan gel with polyacrylamide to form a rigid support which retains the high catalytic activity characteristic of the untreated biocatalysts. The size and shape of the biocatalyst is unaffected by this treatment. The method involves the diffusion of acrylamide, N,N'-methylenebisacrylamide and BETA-dimethylaminopropionitrile (or N,N,N',N'-tetramethylethylenediamine) into the preformed biocatalyst beads followed by the addition of an initiator to cause polymerization within the beads. Treated gels have been used for the continuous fermentation of glucose to ethanol in a packed column for over two months.

  19. 3D jet printer of edible gels for food creation

    NASA Astrophysics Data System (ADS)

    Serizawa, Ryo; Shitara, Mariko; Gong, Jin; Makino, Masato; Kabir, M. Hasnat; Furukawa, Hidemitsu

    2014-03-01

    In recent years, aging is progressing in Japan. Elderly people can't swallow the food well. So, the need of soft food is increasing greatly with the aging of the population. There are so few satisfying foods for the elderly to enjoy a meal. An equipment of printing soft food gives the elderly a big dream and is promising. In this study, we aim at developing a 3D edible gel printer in order to make soft food for the elderly. We made a prototype of the 3D edible gel printer. The printer consists of syringe pump and dispenser. The syringe pump extrudes the solution. The dispenser allows to model threedimensional objects. We use agar solution as the ink to carry out the printing. Agar's gelation deeply depends on temperature. Therefore temperature control of the solution is important to mold optimal shapes because the physical crosslinking network of agar's solution is instable. We succeeded in making the gels and plate-shape gel using the 3D edible gel printer. Further more, in order to increase the gelation speed agar's solution, we changed the dispenser and the printing test is being done now. 4 kinds of soft food prepared from agar and gelatin were printed by the 3D edible gel printer. The compression tests of the printed soft food samples were done and their hardness is measured because the hardness is one of very important factors which influence the food texture greatly. In the future, the viscosity of the agar solution or other food ink should be adjusted to suitable for printing.

  20. Simplified 48-hour IMVic test: an agar plate method.

    PubMed

    Powers, E M; Latt, T G

    1977-09-01

    An agar plate method was developed for the performance of the IMVic (indole, methyl red, Voges-Proskauer, and citrate) tests in lieu of the conventional tubed liquid media. By modifying the composition of the media and adding agar, a single "X"-compartmented petri dish was prepared containing all four IMVic test media. Ease of performance and simplification of the test were achieved by inoculating all four media simultaneously from a single colony (single inoculum) on eosin-methylene blue agar. Tests with 87 cultures, representing 7 genera in the family Enterobacteriaceae, were completed with typical (correct) IMVic patterns for all cultures within 48 h. Parallel tests with conventional media showed that the agar plate method was superior, more sensitive, faster, and simpler to perform, and less time was required to identify Escherichia coli by 72 h. PMID:334074

  1. Thermal characterization of magnetically aligned carbonyl iron/agar composites.

    PubMed

    Diaz-Bleis, D; Vales-Pinzón, C; Freile-Pelegrín, Y; Alvarado-Gil, J J

    2014-01-01

    Composites of magnetic particles into polymeric matrices have received increasing research interest due to their capacity to respond to external magnetic or electromagnetic fields. In this study, agar from Gelidium robustum has been chosen as natural biocompatible polymer to build the matrix of the magnetic carbonyl iron particles (CIP) for their uses in biomedical fields. Heat transfer behavior of the CIP-agar composites containing different concentrations (5, 10, 15, 20, 25 and 30% w/w) of magnetically aligned and non-aligned CIP in the agar matrix was studied using photothermal radiometry (PTR) in the back-propagation emission configuration. The morphology of the CIP-agar composites with aligned and non-aligned CIP under magnetic field was also evaluated by scanning electron microscopy (SEM). The results revealed a dominant effect of CIP concentration over the alignment patterns induced by the magnetic field, which agrees with the behavior of the thermal diffusivity and thermal conductivity. Agar served as a perfect matrix to be used with CIP, and CIP-agar composites magnetically aligned at 20% CIP concentration can be considered as promising 'smart' material for hyperthermia treatments in the biomedical field. PMID:24274482

  2. Characterization of agar/soy protein biocomposite films: Effect of agar on the extruded pellets and compression moulded films.

    PubMed

    Garrido, T; Etxabide, A; Guerrero, P; de la Caba, K

    2016-10-20

    Agar/soy protein biocomposite films were successfully processed by extrusion and compression moulding, obtaining transparent and homogeneous films. The conformational changes occurred during the extrusion process and the effect of agar on the final properties were analyzed. As shown by differential scanning calorimetry (DSC) and specific mechanical energy (SME) values, during the extrusion process protein denatured and unfolded protein chains could interact with agar. These interactions were analyzed by Fourier transform infrared spectroscopy (FTIR) and the secondary structure was determined from the amide I band. Those interactions were supported by the decrease of film solubility. Furthermore, the good compatibility between agar and soy protein was confirmed by the images from scanning electron microscopy (SEM). PMID:27474583

  3. Polyelectrolyte gels

    SciTech Connect

    Segalman, D.J.; Witkowski, W.R.

    1995-06-01

    Polyelectrolyte (PE) gels are swollen polymer/solvent networks that undergo a reversible volume collapse/expansion through various types of stimulation. Applications that could exploit this large deformation and solvent expulsion/absorption characteristics include robotic {open_quotes}fingers{close_quotes} and drug delivery systems. The goals of the research were to first explore the feasibility of using the PE gels as {open_quotes}smart materials{close_quotes} - materials whose response can be controlled by an external stimulus through a feedback mechanism. Then develop a predictive capability to simulate the dynamic behavior of these gels. This involved experimentally characterizing the response of well-characterized gels to an applied electric field and other stimuli to develop an understanding of the underlying mechanisms which cause the volume collapse. Lastly, the numerical analysis tool was used to simulate various potential engineering devices based on PE gels. This report discusses the pursuit of those goals through experimental and computational means.

  4. Hyperspectral imaging for detecting pathogens grown on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung Chul; Lawrence, Kurt C.; Siragusa, Gregory R.; Line, John E.; Park, Bosoon; Windham, William R.

    2007-09-01

    This paper is concerned with the development of a hyperspectral imaging technique for detecting and identifying one of the most common foodborne pathogens, Campylobacter. Direct plating using agars is an effective tool for laboratory tests and analyses of microorganisms. The morphology (size, growth pattern, color, etc.) of colonies grown on agar plates has been widely used to tentatively differentiate organisms. However, it is sometimes difficult to differentiate target organisms like Campylobacters from other contaminants grown together on the same agar plates. A hyperspectral imaging system operating at the visible and near infrared (VNIR) spectral region from 400 nm to 900 nm was set up to measure spectral signatures of 17 different Campylobacter and non-Campylobacter subspecies. Protocols for culturing, imaging samples and for calibrating measured data were developed. The VNIR spectral library of all 17 organisms commonly encountered in poultry was established from calibrated hyperspectral images. A classification algorithm was developed to locate and identify Campylobacters, non-Campylobacter contaminants, and background agars with 99.29% accuracy. This research has a potential to be expanded to detect other pathogens grown on agar media.

  5. Comparison of electrical conductivities of various brain phantom gels: Developing a ‘Brain Gel Model’

    PubMed Central

    Kandadai, Madhuvanthi A.; Raymond, Jason L.; Shaw, George J.

    2012-01-01

    The use of conducting gels to mimic brain and other tissues is of increasing interest in the development of new medical devices. Currently, there are few such models that can be utilized at physiologic temperatures. In this work, the conductivities of agar, agarose and gelatin gels were manipulated by varying NaCl concentration from 0–1 mg/ml. The AC conductivity was measured at room and physiological temperatures (37°C) in the 100–500 Hz frequency range. Conductivity (σ) was nearly independent of frequency but increased linearly with NaCl concentration and was higher at physiological temperatures in these gels. A formula for predicting conductivity as a function of NaCl concentration was derived for each gel type. The overall goal is to develop a ‘brain gel model’, for studying low frequency electrical properties of the brain and other tissues at physiological temperatures. PMID:23139442

  6. Comparison of electrical conductivities of various brain phantom gels: Developing a 'Brain Gel Model'

    PubMed

    Kandadai, Madhuvanthi A; Raymond, Jason L; Shaw, George J

    2012-12-01

    The use of conducting gels to mimic brain and other tissues is of increasing interest in the development of new medical devices. Currently, there are few such models that can be utilized at physiologic temperatures. In this work, the conductivities of agar, agarose and gelatin gels were manipulated by varying NaCl concentration from 0-1 mg/ml. The AC conductivity was measured at room and physiological temperatures (37°C) in the 100-500 Hz frequency range. Conductivity (σ) was nearly independent of frequency but increased linearly with NaCl concentration and was higher at physiological temperatures in these gels. A formula for predicting conductivity as a function of NaCl concentration was derived for each gel type. The overall goal is to develop a 'brain gel model', for studying low frequency electrical properties of the brain and other tissues at physiological temperatures. PMID:23139442

  7. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin

    NASA Astrophysics Data System (ADS)

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C.

    2015-03-01

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure—PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery.

  8. Cavitation-enhanced delivery of insulin in agar and porcine models of human skin.

    PubMed

    Feiszthuber, Helga; Bhatnagar, Sunali; Gyöngy, Miklós; Coussios, Constantin-C

    2015-03-21

    Ultrasound-assisted transdermal insulin delivery offers a less painful and less invasive alternative to subcutaneous insulin injections. However, ultrasound-based drug delivery, otherwise known as sonophoresis, is a highly variable phenomenon, in part dependent on cavitation. The aim of the current work is to investigate the role of cavitation in transdermal insulin delivery. Fluorescently stained, soluble Actrapid insulin was placed on the surface of human skin-mimicking materials subjected to 265 kHz, 10% duty cycle focused ultrasound. A confocally and coaxially aligned 5 MHz broadband ultrasound transducer was used to detect cavitation. Two different skin models were used. The first model, 3% agar hydrogel, was insonated with a range of pressures (0.25-1.40 MPa peak rarefactional focal pressure-PRFP), with and without cavitation nuclei embedded within the agar at a concentration of 0.05% w/v. The second, porcine skin was insonated at 1.00 and 1.40 MPa PRFP. In both models, fluorescence measurements were used to determine penetration depth and concentration of delivered insulin. Results show that in agar gel, both insulin penetration depth and concentration only increased significantly in the presence of inertial cavitation, with up to a 40% enhancement. In porcine skin the amount of fluorescent insulin was higher in the epidermis of those samples that were exposed to ultrasound compared to the control samples, but there was no significant increase in penetration distance. The results underline the importance of instigating and monitoring inertial cavitation during transdermal insulin delivery. PMID:25716689

  9. Fly agaric (Amanita muscaria) poisoning, case report and review.

    PubMed

    Satora, Leszek; Pach, Dorota; Butryn, Beata; Hydzik, Piotr; Balicka-Slusarczyk, Barbara

    2005-06-01

    Gathering and eating mushrooms and other plants containing psychoactive substances has become increasingly popular among young people experimenting with drugs. Dried fly agaric Amanita muscaria fruiting bodies were eaten by five young persons (18-21 years of age) at a party in order to evoke hallucinations. Visual and auditory hallucinations occurred in four of them, whereas a 18-year-old girl lost consciousness. The following morning, she went to the Clinic of Toxicology. Due to the fact that not all the active substances present in the fly agaric have been identified, and some of them have an effect after a period of latency, the patient was admitted for several days of observation during which check-up examinations were performed. After four days without any problems, she was discharged. The poisoning regressed with no organ complications. The remaining persons who had eaten the fly agaric were free from any complaints. PMID:15904689

  10. Effect of BiTek agar on lysostaphin susceptibility of staphylococci.

    PubMed Central

    Langlois, B E; Dawson, K; Akers, K

    1990-01-01

    Staphylococci which were considered to be lysostaphin susceptible on P agar containing Bacto-Agar showed different degrees of resistance to lysostaphin when tested on P agar made with BiTek agar. As a result, lysostaphin-susceptible strains were misidentified as lysostaphin-resistant strains. Images PMID:2254432

  11. Growth kinetics of three species of Tetrahymena on solid agar

    SciTech Connect

    Dobra, K.W.; McArdle, E.W.; Ehret, C.F.

    1980-01-01

    A nutrient-agar method without liquid overlay has been developed for cultivation of ciliates. Three species of Tetrahymena-T. pyriformis strain W, T. rostrata strain UNI, and T. vorax strain V/sub 2/S, representing the 3 main groups of Tetrahymena species, were used; however the method should apply to other ciliates. Growth on the surface of the agar was facilitated by an optimal surface-to-volume ratio yielding a high density of ciliates and short generation times. At the highest density achieved, the cells became irregularly hexagonal and formed a monolayer tissue on the agar. Ciliates grown on agar were like those in liquid culture, typical oral ciliature, food-vacuole formation, and typical cortical patterns being retained. Advantages of this method include high cell density, easy recovery, and optimal O/sub 2/ supply. The organisms can also be cultivated on the surface of sterile cellulose-nitrate filters, facilitating in situ fixation and staining as well as transfer into different media by transfer of filters with cells, without prior centrifugation and resuspension.

  12. Hyperspectral Imaging for Detecting Pathogens Grown on Agar Plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper is concerned with the development of a hyperspectral imaging technique for detecting and identifying one of the most common foodborne pathogens, Campylobacter. Direct plating using agars is an effective tool for laboratory tests and analyses of microorganisms. The morphology (size, growth...

  13. Recovery of Sublethally Injured Bacteria Using Selective Agar Overlays.

    ERIC Educational Resources Information Center

    McKillip, John L.

    2001-01-01

    This experiment subjects bacteria in a food sample and an environmental sample to conditions of sublethal stress in order to assess the effectiveness of the agar overlay method to recover sublethally injured cells compared to direct plating onto the appropriate selective medium. (SAH)

  14. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  15. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  16. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  17. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  18. 21 CFR 866.4600 - Ouchterlony agar plate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ouchterlony agar plate. 866.4600 Section 866.4600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents §...

  19. Improving agar electrospinnability with choline-based deep eutectic solvents

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  20. Development of a selective agar plate for the detection of Campylobacter spp. in fresh produce.

    PubMed

    Yoo, Jin-Hee; Choi, Na-Young; Bae, Young-Min; Lee, Jung-Su; Lee, Sun-Young

    2014-10-17

    This study was conducted to develop a selective medium for the detection of Campylobacter spp. in fresh produce. Campylobacter spp. (n=4), non-Campylobacter (showing positive results on Campylobacter selective agar) strains (n=49) isolated from fresh produce, indicator bacteria (n=13), and spoilage bacteria isolated from fresh produce (n=15) were plated on four Campylobacter selective media. Bolton agar and modified charcoal cefoperazone deoxycholate agar (mCCDA) exhibited higher sensitivity for Campylobacter spp. than did Preston agar and Hunt agar, although certain non-Campylobacter strains isolated from fresh produce by using a selective agar isolation method, were still able to grow on Bolton agar and mCCDA. To inhibit the growth of non-Campylobacter strains, Bolton agar and mCCDA were supplemented with 5 antibiotics (rifampicin, polymyxin B, sodium metabisulfite, sodium pyruvate, ferrous sulfate) and the growth of Campylobacter spp. (n=7) and non-Campylobacter strains (n=44) was evaluated. Although Bolton agar supplemented with rifampicin (BR agar) exhibited a higher selectivity for Campylobacter spp. than did mCCDA supplemented with antibiotics, certain non-Campylobacter strains were still able to grow on BR agar (18.8%). When BR agar with various concentrations of sulfamethoxazole-trimethoprim were tested with Campylobacter spp. (n=8) and non-Campylobacter (n=7), sulfamethoxazole-trimethoprim was inhibitory against 3 of 7 non-Campylobacter strains. Finally, we validated the use of BR agar containing 50mg/L sulfamethoxazole (BRS agar) or 0.5mg/L ciprofloxacin (BRCS agar) and other selective agars for the detection of Campylobacter spp. in chicken and fresh produce. All chicken samples were positive for Campylobacter spp. when tested on mCCDA, BR agar, and BRS agar. In fresh produce samples, BRS agar exhibited the highest selectivity for Campylobacter spp., demonstrating its suitability for the detection of Campylobacter spp. in fresh produce. PMID:25126968

  1. Total Antioxidant Capacity of Serum Determined Using the Potassium Permanganate Agar Method Based on Serum Diffusion in Agar.

    PubMed

    Zhou, Ying; Zhang, Meijuan; Liu, Hui

    2015-01-01

    Objectives. To develop a new method for determining total antioxidants in serum and to evaluate the total antioxidant capacity of organisms. Design and Methods. Sodium hyposulfite (Na2S2O3) and serum were used to evaluate the linearity and precision of the potassium permanganate agar method. The area of serum diffusion in samples from 30 intensive care unit (ICU) patients compared with 44 healthy subjects was determined by the potassium permanganate agar method. Results. The linearity (R (2) in the linear experiment of Na2S2O3 was 0.994; R (2) in the linear experiment of serum was 0.987) and precision (coefficient of variation of area of high level serum diffusion within-run, between-run, and between-day and coefficient of variation of area of low serum diffusion within-run, between-run, and between-day were all less than 10%) were acceptable using the potassium permanganate agar method. Total antioxidants of serum between the ICU group and the healthy group were different (p = 0.002, two tailed). Conclusions. Total antioxidants in serum can be determined by the potassium permanganate agar method. The total antioxidant capacity of an organism can be evaluated by the amount of total antioxidants in serum. PMID:26347595

  2. Total Antioxidant Capacity of Serum Determined Using the Potassium Permanganate Agar Method Based on Serum Diffusion in Agar

    PubMed Central

    Zhou, Ying; Zhang, Meijuan; Liu, Hui

    2015-01-01

    Objectives. To develop a new method for determining total antioxidants in serum and to evaluate the total antioxidant capacity of organisms. Design and Methods. Sodium hyposulfite (Na2S2O3) and serum were used to evaluate the linearity and precision of the potassium permanganate agar method. The area of serum diffusion in samples from 30 intensive care unit (ICU) patients compared with 44 healthy subjects was determined by the potassium permanganate agar method. Results. The linearity (R2 in the linear experiment of Na2S2O3 was 0.994; R2 in the linear experiment of serum was 0.987) and precision (coefficient of variation of area of high level serum diffusion within-run, between-run, and between-day and coefficient of variation of area of low serum diffusion within-run, between-run, and between-day were all less than 10%) were acceptable using the potassium permanganate agar method. Total antioxidants of serum between the ICU group and the healthy group were different (p = 0.002, two tailed). Conclusions. Total antioxidants in serum can be determined by the potassium permanganate agar method. The total antioxidant capacity of an organism can be evaluated by the amount of total antioxidants in serum. PMID:26347595

  3. Starbursts and Wispy Drops : Surfactants Spreading on Gel Substrates

    NASA Astrophysics Data System (ADS)

    Mukhopadhyay, Shomeek; Daniels, Karen; Behringer, Robert

    2005-11-01

    We report a phase diagram for a novel instability seen in drops of nonionic surfactant solution (Triton X-305) spreading on viscoelastic agar gel substrate . This system allows us to examine the effect of varying the effective fluidity/stiffness of aqueous substrates. The morphology is strongly affected by the substrate fluidity, ranging from spreading starbursts of arms on weak gels, to wispy drops on intermediate strength gels, to circular drops on stiff gels. We analyze the dynamics of spreading in the starburst phase, where the arm length grows as t ^3/4 at early times, independent of the gel strength and surfactant concentration. The number of arms is proportional to the surfactant concentration and inversely proportional to the gel strength. Ongoing work is exploring the effects of changing the drop volume.

  4. Improving immobilized biocatalysts by gel phase polymerization

    SciTech Connect

    Kuu, W.Y.; Polack, J.A.

    1983-08-01

    A new method is presented for the treatment of gel-type supports, used for immobilizing microbial cells and enzymes, to obtain high mechanical strength. It is particularly useful for ethanol fermentation over gel beads containing immobilized viable cells, where the beads can be ruptured by gas production and the growth of cells within the gels. This method consists of treating agar or carrageenan gel with polyacrylamide to form a rigid support which retains the high catalytic activity characteristic of the untreated biocatalysts. The size and shape of the biocatalyst is unaffected by this treatment. The method involves the diffusion of acrylamide, N,N'-methylenebisacrylamide and ..beta..-dimethylaminopropionitrile (or N,N,N',N'-tetramethylethylenediamine) into the preformed biocatalyst beads followed by the addition of an initiator to cause polymerization within the beads. Treated gels have been used for the continuous fermentation of glucose to ethanol in a packed column for over two months. During this operation, the gel beads maintained their rigidity, and the maximum productivity was as high as 50 gh/sup -1/ L/sup -1/ gel. There was no appreciable decay of cell activity.

  5. Comparison of chromogenic Biolog Rainbow agar Shigella/Aeromonas with xylose lysine desoxycholate agar for isolation and detection of Shigella spp. from foods.

    PubMed

    Zhang, Guodong; Lampel, Keith A

    2010-08-01

    Shigella outbreaks are widely reported throughout the world. However, it remains a challenge to isolate Shigella spp. from foods by using conventional microbiological media. The main objective of this study was to determine the effectiveness of a novel chromogenic medium, Rainbow agar Shigella/Aeromonas (Rainbow agar), for the isolation and detection of Shigella spp. in foods. All four Shigella species, S. sonnei, S. flexneri, S. dysenteriae, and S. boydii, were studied. Rainbow agar was compared with tryptic soy agar, xylose lysine desoxycholate agar (XLD), and Salmonella Shigella agar (SSA) for enumeration of Shigella spp. in pure culture. This chromogenic agar and XLD were also used to isolate Shigella spp. in artificially contaminated foods (4.8 log CFU/g of food), including lettuce, parsley, cilantro, spinach, potato salad, and shrimp. The inhibitory effect on Shigella growth by Rainbow agar was between that of XLD and SSA. All vegetables studied showed a moderately high background microflora on XLD and Rainbow agar. With artificially inoculated produce, Rainbow agar recovered about 1 to 2 log CFU more S. sonnei, S. dysenteriae, and S. boydii per g of food than did XLD. For potato salad and shrimp, which had low background microflora on Rainbow agar, Rainbow agar was slightly better in recovering Shigella spp. than XLD was in most cases. However, we found that the addition of streptomycin (6.25 mg/liter) to Rainbow agar could facilitate the isolation of Shigella in vegetables tested. In conclusion, Rainbow agar was a much more effective medium than was XLD for the isolation of Shigella spp. from foods. PMID:20819355

  6. Inexpensive and safe DNA gel electrophoresis using household materials.

    PubMed

    Ens, S; Olson, A B; Dudley, C; Ross, N D; Siddiqi, A A; Umoh, K M; Schneegurt, M A

    2012-01-01

    Gel electrophoresis is the single most important molecular biology technique and it is central to life sciences research, but it is often too expensive for the secondary science classroom or homeschoolers. A simple safe low-cost procedure is described here that uses household materials to construct and run DNA gel electrophoresis. Plastic containers are fitted with aluminum foil electrodes and 9-V batteries to run food-grade agar-agar gels using aquarium pH buffers and then stained with gentian violet. This activity was tested in a high school biology classroom with significantly positive responses on postactivity reflective surveys. The electrophoresis activity addresses several Life Science Content Standard C criteria, including aspects of cell biology, genetics, and evolution. It also can be used to teach aspects of motion and force in the physical science classroom. PMID:22615228

  7. Membrane fouling in a membrane bioreactor: High filtration resistance of gel layer and its underlying mechanism.

    PubMed

    Chen, Jianrong; Zhang, Meijia; Li, Fengquan; Qian, Lei; Lin, Hongjun; Yang, Lining; Wu, Xilin; Zhou, Xiaoling; He, Yiming; Liao, Bao-Qiang

    2016-10-01

    A membrane bioreactor (MBR) was continuously operated to investigate mechanisms of fouling caused by the gel layer in this study. Agar was used as a model foulant for gel layer formation, and filtration resistance of gel layers was systematically assessed. The results showed that gel layer possessed unusually high specific filtration resistance (SFR) and high measured porosity as compared with cake layer. Current knowledge cannot explain the contradiction between high filtration resistance and high porosity of gel layer. A new fouling mechanism based on Flory-Huggins theory was then proposed. Filtration resistance of agar gel layer was found to be independent of pH and ionic strength, but linearly increase with gel thickness. The results are accordant with the mechanism deductions. Simulation of the mechanism model showed that the filtration resistance induced by mixing chemical potential variation was comparable to the experimental data of filtration resistance of agar gel layer, indicating that the proposed mechanism is the predominant mechanism responsible for the high filtration resistance of gel layer. The proposed mechanism was further verified from the bound water viewpoint. PMID:27328364

  8. A modified agar plate method for detection of Strongyloides stercoralis.

    PubMed

    Koga, K; Kasuya, S; Khamboonruang, C; Sukhavat, K; Ieda, M; Takatsuka, N; Kita, K; Ohtomo, H

    1991-10-01

    The agar plate method is a new technique with high detection rates for coprological diagnosis of human strongyloidiasis. This report details modifications of the technique and establishes a standardized procedure. We recommend that all plates should be carefully observed using a microscope because macroscopic observation can lead to false negative results. It is also advisable to pour formalin solution directly into microscopically positive dishes to collect worms by sedimentation. This procedure enables one to observe worms otherwise hidden. Sealing dishes with adhesive tape prevents larvae from crawling out of the dishes, eliminating any possibility in the reduction of detection rates, and greatly improves the safety conditions for the technician performing the procedure. We consider the agar plate method to be superior to the filter paper method in detecting Strongyloides, and we believe that it will eventually become the technique of choice. PMID:1951861

  9. Aerosol gels

    NASA Technical Reports Server (NTRS)

    Sorensen, Christopher M. (Inventor); Chakrabarti, Amitabha (Inventor); Dhaubhadel, Rajan (Inventor); Gerving, Corey (Inventor)

    2010-01-01

    An improved process for the production of ultralow density, high specific surface area gel products is provided which comprises providing, in an enclosed chamber, a mixture made up of small particles of material suspended in gas; the particles are then caused to aggregate in the chamber to form ramified fractal aggregate gels. The particles should have a radius (a) of up to about 50 nm and the aerosol should have a volume fraction (f.sub.v) of at least 10.sup.-4. In preferred practice, the mixture is created by a spark-induced explosion of a precursor material (e.g., a hydrocarbon) and oxygen within the chamber. New compositions of matter are disclosed having densities below 3.0 mg/cc.

  10. Mupirocin-mucin agar for selective enumeration of Bifidobacterium bifidum.

    PubMed

    Pechar, Radko; Rada, Vojtech; Parafati, Lucia; Musilova, Sarka; Bunesova, Vera; Vlkova, Eva; Killer, Jiri; Mrazek, Jakub; Kmet, Vladimir; Svejstil, Roman

    2014-11-17

    Bifidobacterium bifidum is a bacterial species exclusively found in the human intestinal tract. This species is becoming increasingly popular as a probiotic organism added to lyophilized products. In this study, porcine mucin was used as the sole carbon source for the selective enumeration of B. bifidum in probiotic food additives. Thirty-six bifidobacterial strains were cultivated in broth with mucin. Only 13 strains of B. bifidum utilized the mucin to produce acids. B. bifidum was selectively enumerated in eight probiotic food supplements using agar (MM agar) containing mupirocin (100 mg/L) and mucin (20 g/L) as the sole carbon source. MM agar was fully selective if the B. bifidum species was presented together with Bifidobacterium animalis subsp. lactis, Bifidobacterium breve, and Bifidobacterium longum subsp. longum species and with lactic acid bacteria (lactobacilli, streptococci). Isolated strains of B. bifidum were identified using biochemical, PCR, MALDI-TOF procedures and 16S rRNA gene sequencing. The novel selective medium was also suitable for the isolation of B. bifidum strains from human fecal samples. PMID:25217723

  11. Individual based simulations of bacterial growth on agar plates

    NASA Astrophysics Data System (ADS)

    Ginovart, M.; López, D.; Valls, J.; Silbert, M.

    2002-03-01

    The individual based simulator, INDividual DIScrete SIMulations (INDISIM) has been used to study the behaviour of the growth of bacterial colonies on a finite dish. The simulations reproduce the qualitative trends of pattern formation that appear during the growth of Bacillus subtilis on an agar plate under different initial conditions of nutrient peptone concentration, the amount of agar on the plate, and the temperature. The simulations are carried out by imposing closed boundary conditions on a square lattice divided into square spatial cells. The simulator studies the temporal evolution of the bacterial population possible by setting rules of behaviour for each bacterium, such as its uptake, metabolism and reproduction, as well as rules for the medium in which the bacterial cells grow, such as concentration of nutrient particles and their diffusion. The determining factors that characterize the structure of the bacterial colony patterns in the presents simulations, are the initial concentrations of nutrient particles, that mimic the amount of peptone in the experiments, and the set of values for the microscopic diffusion parameter related, in the experiments, to the amount of the agar medium.

  12. Modeling development of inhibition zones in an agar diffusion bioassay.

    PubMed

    Chandrasekar, Vaishnavi; Knabel, Stephen J; Anantheswaran, Ramaswamy C

    2015-09-01

    A two-temperature agar diffusion bioassay is commonly used to quantify the concentration of nisin using Micrococcus luteus as the indicator microorganism. A finite element computational model based on Fick's second law of diffusion was used to predict the radius of the inhibition zone in this diffusion bioassay. The model developed was used to calculate nisin concentration profiles as a function of time and position within the agar. The minimum inhibitory concentration (MIC) of nisin against M. luteus was determined experimentally. The critical time (T c) for growth of M. luteus within the agar diffusion bioassay was experimentally determined using incubation studies with nisin. The radius of the inhibition zone was predicted from the computational model as the location where the predicted nisin concentration at T c was equal to MIC. The MIC was experimentally determined to be 0.156 μg mL(-1), and T c was determined to be 7 h. Good agreement (R (2) = 0.984) was obtained between model-predicted and experimentally determined inhibition zone radii. PMID:26405525

  13. Modeling development of inhibition zones in an agar diffusion bioassay

    PubMed Central

    Chandrasekar, Vaishnavi; Knabel, Stephen J; Anantheswaran, Ramaswamy C

    2015-01-01

    A two-temperature agar diffusion bioassay is commonly used to quantify the concentration of nisin using Micrococcus luteus as the indicator microorganism. A finite element computational model based on Fick's second law of diffusion was used to predict the radius of the inhibition zone in this diffusion bioassay. The model developed was used to calculate nisin concentration profiles as a function of time and position within the agar. The minimum inhibitory concentration (MIC) of nisin against M. luteus was determined experimentally. The critical time (Tc) for growth of M. luteus within the agar diffusion bioassay was experimentally determined using incubation studies with nisin. The radius of the inhibition zone was predicted from the computational model as the location where the predicted nisin concentration at Tc was equal to MIC. The MIC was experimentally determined to be 0.156 μg mL−1, and Tc was determined to be 7 h. Good agreement (R2 = 0.984) was obtained between model-predicted and experimentally determined inhibition zone radii. PMID:26405525

  14. Effects of addition of supramolecular assembly on the anatase nanocrystalline precipitation of sol-gel derived SiO2-TiO2 coating films by hot-water treatment.

    PubMed

    Katagiri, Kiyofumi; Harada, Genki; Matsuda, Atsunori; Kogure, Toshihiro; Muto, Hiroyuki; Sakai, Mototsugu

    2006-06-01

    Effects of the addition of a supramolecular assembly of cetyltrimethylammonium bromide in SiO2-TiO2 gel films on the formation of anatase type TiO2 nanocrystals with hot-water treatment were investigated. Anatase nanocrystals were formed in the whole SiO2-TiO2 gel films with the addition of cetyltrimethylammonium bromide by the treatment, whereas the nanocrystals were formed only on the film surface in the case of gel films without cetyltrimethylammonium bromide. Cetyltrimethylammonium bromide molecules in the SiO2-TiO2 gel films were completely removed by the hot-water treatment and the following UV irradiation. In the usual procedure for preparation of porous materials, the removal of template molecular assemblies required high temperature treatment over 400 degrees C. In this system, all the processes were performed at temperatures less than 100 degrees C. Additionally, the porous structure produced by the removal of micellar assembly allowed anatase nanocrystals to be formed inside the films. Therefore, the method presented in this work provides us with the novel photocatalyst coatings of porous membrane with highly-dispersed TiO2 nanocrystals via low temperature process. PMID:17025087

  15. Simple Protocol for Secondary School Hands-On Activity: Electrophoresis of Pre-Stained Nucleic Acids on Agar-Agar Borate Gels

    ERIC Educational Resources Information Center

    Britos, Leticia; Goyenola, Guillermo; Orono, Silvia Umpierrez

    2004-01-01

    An extremely simple, inexpensive, and safe method is presented, which emulates nucleic acids isolation and electrophoretic analysis as performed in a research environment, in the context of a secondary school hands-on activity. The protocol is amenable to an interdisciplinary approach, taking into consideration the electrical and chemical…

  16. Differential recovery of Streptococcus mutans from various mitis-salivarius agar preparations.

    PubMed Central

    Liljemark, W F; Okrent, D H; Bloomquist, C G

    1976-01-01

    Recoveries of Streptococcus mutans from human dental plaque were lower when plated on mitis-salivarius agar obtained from Baltimore Biological Laboratories as compared with mitis-salivarius agar obtained from Difco Laboratories. However, no difference in recoveries of established laboratory strains of S. mutans was observed between these two agar preparations. PMID:956358

  17. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In this work, we report the successful fabrication of agar-based nanofibers by an electrospinning technique using water as the solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operated at 50 deg C, to avoid agar gelation. Pure agar solution 1% (w/w) showed inadequ...

  18. Precipitation Recycling

    NASA Technical Reports Server (NTRS)

    Eltahir, Elfatih A. B.; Bras, Rafael L.

    1996-01-01

    The water cycle regulates and reflects natural variability in climate at the regional and global scales. Large-scale human activities that involve changes in land cover, such as tropical deforestation, are likely to modify climate through changes in the water cycle. In order to understand, and hopefully be able to predict, the extent of these potential global and regional changes, we need first to understand how the water cycle works. In the past, most of the research in hydrology focused on the land branch of the water cycle, with little attention given to the atmospheric branch. The study of precipitation recycling which is defined as the contribution of local evaporation to local precipitation, aims at understanding hydrologic processes in the atmospheric branch of the water cycle. Simply stated, any study on precipitation recycling is about how the atmospheric branch of the water cycle works, namely, what happens to water vapor molecules after they evaporate from the surface, and where will they precipitate?

  19. STRONTIUM PRECIPITATION

    DOEpatents

    McKenzie, T.R.

    1960-09-13

    A process is given for improving the precipitation of strontium from an aqueous phosphoric-acid-containing solution with nickel or cobalt ferrocyanide by simultaneously precipitating strontium or calcium phosphate. This is accomplished by adding to the ferrocyanide-containing solution calcium or strontium nitrate in a quantity to yield a concentration of from 0.004 to 0.03 and adjusting the pH of the solution to a value of above 8.

  20. Culture of Piscirickettsia salmonis on enriched blood agar.

    PubMed

    Mauel, Michael J; Ware, Cynthia; Smith, Pedro A

    2008-03-01

    Piscirickettsia salmonis is the etiologic agent of piscirickettsiosis, an economically significant disease of fish. Isolation of P. salmonis by culturing on fish cell lines has been the standard technique since the initial isolation of the organism. The ability to grow P. salmonis on artificial media would relieve facilities of the cost of maintaining cell lines, permit isolation at fish culture sites with fewer contamination problems, and allow easier transport of isolates to diagnostic facilities for confirmation assays. This report describes the successful culture of P. salmonis on enriched blood agar. PMID:18319435

  1. Borelli's lactritmel agar induces conidiation in rare-macroconidia producing dermatophytic fungi.

    PubMed

    Ilkit, Macit; Gümral, Ramazan; Döğen, Aylin

    2012-10-01

    Macroconidia are among the most important indicators used to identify dermatophytic fungi, but several do not usually sporulate and/or produce macroconidia on Sabouraud glucose agar. Specifically, Microsporum audouinii, M. ferrugineum, Trichophyton concentricum, T. schoenleinii, T. verrucosum, and T. violaceum (including T. soudanense and T. yaoundei) rarely form macroconidia and, therefore, cannot be easily identified. In this study, we investigated the production of macroconidia on nine common laboratory media, including Borelli's lactritmel agar (BLA), modified Borelli's lactritmel agar (MBLA), brain heart infusion agar (BHIA), Christensen's urease agar in Petri dishes (UPA), cornmeal dextrose agar (CMDA), Lowenstein-Jensen agar (LJA), malt extract agar (MEA), oatmeal agar (OA), and potato dextrose agar (PDA). The performance of these media was evaluated using 18 rare-macroconidia producing isolates, including representative of the six species mentioned above. All cultures in this study were incubated at 26°C on the bench, and conidia formation on each was investigated at 5, 10, 15, 20, 25, and 30 days of incubation. BLA apparently improved macroconidia production after 15 days and was the most useful nutrient agar medium to induce these phenotypic characters in daily practice, closely followed by OA, PDA, and MBLA. PMID:22563856

  2. Physicochemical properties of biodegradable polyvinyl alcohol-agar films from the red algae Hydropuntia cornea.

    PubMed

    Madera-Santana, Tomás J; Robledo, Daniel; Freile-Pelegrín, Yolanda

    2011-08-01

    Agar obtained from the red alga Hydropuntia cornea was blended with polyvinyl alcohol (PVOH) in order to produce biodegradable films. In this study, we compare the properties of biopolymeric films formulated with agars extracted from H. cornea collected at different seasons (rainy and dry) in the Gulf of Mexico coast and PVOH as synthetic matrix. The films were prepared at different agar contents (0%, 25%, 50%, 75%, and 100%) and their optical, mechanical, thermal, and morphological properties analyzed. The tensile strength of PVOH-agar films increased when agar content was augmented. The formulation with 50% agar from rainy season (RS) had a significant higher tensile strength when compared to those from dry season (DS; p < 0.05). Tensile modulus also displayed an increasing trend and likewise, for 50% and 75% agar blends from RS showed higher values than those from DS (p < 0.05). In contrast, elongation at break decreased as the agar content increased, independently of the season. Environmental scanning electron microscopy images of PVOH-agar 75% biofilms from RS showed a homogeneous structure with good interfacial adhesion between the two components. The changes evidenced in the FTIR spectrum of this blend suggest that hydrogen bonding is taking place between the agar ether linkages (C-O-C) and the hydroxyl groups (OH) of the PVOH. Based on the above mentioned results, blends of PVOH and 75% agar from H. cornea collected in rainy season showed good properties for applications in the biodegradable packaging industry. PMID:21207092

  3. Improved agar diffusion method for detecting residual antimicrobial agents.

    PubMed

    Tsai, C E; Kondo, F

    2001-03-01

    The improved agar diffusion method for determination of residual antimicrobial agents was investigated, and the sensitivities of various combinations of test organisms and assay media were determined using 7 organisms, 5 media, and 31 antimicrobial agents. Bacillus stearothermophilus and synthetic assay medium (SAM) showed the greatest sensitivity for screening penicillins (penicillin G and ampicillin). The combination of Bacillus subtilis and minimum medium (MM) was the most sensitive for tetracyclines (oxytetracycline and chlortetracycline), B. stearothermophilus and SAM or Micrococcus luteus and Mueller-Hinton agar (MHA) for detecting tylosin and erythromycin, B. subtilis and MHA for aminoglycosides (streptomycin, kanamycin, gentamicin, and dihydrostreptomycin), B. stearothermophilus and SAM for polyethers (salinomycin and lasalocid), and B. subtilis and MM or Clostridium perfringens and GAM for polypeptides (thiopeptin, enramycin, virginiamycin, and bacitracin). However, gram-negative bacterium Escherichia coli ATCC 27166 and MM were better for screening for colistin and polymixin-B. For detecting the synthetic drugs tested, the best combination was B. subtilis and MM for sulfonamides, E. coli 27166 and MM for quinolones (oxolinic acid and nalidixic acid), B. subtilis and MM for furans (furazolidone), and the bioluminescent bacterium Photobacterium phosphoreum and luminescence assay medium for chloramphenicol and oxolinic acid. The results showed that the use of four assay plates, B. stearothermophilus and SAM, B. subtilis and MM, M. luteus and MHA, and E. coli 27166 and MM, was superior to the currently available techniques for screening for residual antimicrobial agents in edible animal tissues. PMID:11252480

  4. Spectral filtering for improved pulsed photothermal temperature profiling in agar tissue phantoms

    PubMed Central

    Milanič, Matija; Majaron, Boris; Nelson, J. Stuart

    2009-01-01

    We present a systematic experimental comparison of pulsed photothermal temperature profiling utilizing the customary spectral band of the InSb radiation detector (λ=3.0 to 5.6 μm) and a narrowed acquisition band (4.5 to 5.6 μm). We use custom tissue phantoms composed of agar gel layers separated by thin absorbing layers. The laser-induced temperature profiles are reconstructed within the customary monochromatic approximation, using a custom minimization algorithm. In a detailed numerical simulation of the experimental procedure, we consider several acquisition spectral bands with the lower wavelength limit varied between 3.0 and 5.0 μm (imitating application of different long-pass filters). The simulated PPTR signals contain noise with amplitude and spectral characteristics consistent with our experimental system. Both experimental and numerical results indicate that spectral filtering reduces reconstruction error and broadening of temperature peaks, especially for shallower and more complex absorbing structures. For the simulated PPTR system and watery tissues, numerical results indicate an optimal lower wavelength limit of 3.8 to 4.2 μm. PMID:19123649

  5. Precipitation Matters

    ERIC Educational Resources Information Center

    McDuffie, Thomas

    2007-01-01

    Although weather, including its role in the water cycle, is included in most elementary science programs, any further examination of raindrops and snowflakes is rare. Together rain and snow make up most of the precipitation that replenishes Earth's life-sustaining fresh water supply. When viewed individually, raindrops and snowflakes are quite…

  6. Evaluation of eight agar media for the isolation of shiga toxin-Producing Escherichia coli.

    PubMed

    Gill, Alexander; Huszczynski, George; Gauthier, Martine; Blais, Burton

    2014-01-01

    The growth characteristics of 96 shiga toxin-producing Escherichia coli (STEC) strains representing 36 different O-types (including priority O types O26, O45, O103, O111, O121, O145 and O157) on commercial and in-house agar media were studied. The ability of the strains to grow on agar media with varying selective supplement formulations was evaluated using MacConkey Agar (MAC); Rainbow® Agar O157 (RBA); Rainbow® Agar O157 with manufacturer-recommended selective supplements (RBA-NT); Rainbow® Agar O157 with USDA-recommended selective supplements (RBA-USDA); CHROMagar STEC™ (CH STEC); Tryptone Bile agar containing cefixime and tellurite (TBA-CT); Tryptone Bile agar containing cefixime, tellurite, eosin and methylene blue (TBA-EM); and VTEC agar. All of the strains were able to grow on MAC, RBA and VTEC agar, whereas a number of strains (including some non-O157 priority O types) were unable to grow on the highly selective media CH STEC, RBA-NT, RBA-USDA, TBA-EM and TBA-CT. Only RBA-NT and CH STEC exhibited significant inhibition of background flora from ground beef enrichment. Significant inhibition of background flora from beef trim enrichment was observed with RBA-NT, RBA-USDA, CH STEC, TBA-EM and VTEC agar. With exception of E. coli O157, several different colony morphologies were observed on the differential plating media among strains of the same O type, indicating that this colony morphology is not a reliable means of identifying target STEC. These results suggest that an approach to maximize the recovery of target STEC from beef enrichment cultures is dual plating on lesser (RBA, MAC, VTEC agar) and more highly (RBA-NT, CH STEC) selective agars. PMID:24211606

  7. Lecithin-agar assay for lecithinase antibodies in serum.

    PubMed

    Sibinovic, K H; Brown, F A; Pettigrew, K D; Vought, R L

    1971-01-01

    A technique for assay of lecithinase antibodies in serum was developed in this laboratory by using a lecithin-agar plate diffusion procedure based on a combination of described plate assays. Egg yolk lipoprotein composed primarily of lecithin was used as a substrate for reaction with free or non-neutralized lecithinase C after incubation of known amounts of lecithinase C with various dilutions of control and test sera. It was found that the size of the reaction zone was a function of enzyme concentration and inversely proportional to the antibody concentration. Accuracy and precision of the assay were determined. In addition, lecithinase antibody levels in sera from experimentally inoculated rats and rabbits and sera from randomly selected human patients were studied. PMID:4322282

  8. Lecithin-Agar Assay for Lecithinase Antibodies in Serum

    PubMed Central

    Sibinovic, Kyle H.; Brown, Freddie A.; Pettigrew, Karen D.; Vought, Robert L.

    1971-01-01

    A technique for assay of lecithinase antibodies in serum was developed in this laboratory by using a lecithin-agar plate diffusion procedure based on a combination of described plate assays. Egg yolk lipoprotein composed primarily of lecithin was used as a substrate for reaction with free or non-neutralized lecithinase C after incubation of known amounts of lecithinase C with various dilutions of control and test sera. It was found that the size of the reaction zone was a function of enzyme concentration and inversely proportional to the antibody concentration. Accuracy and precision of the assay were determined. In addition, lecithinase antibody levels in sera from experimentally inoculated rats and rabbits and sera from randomly selected human patients were studied. Images PMID:4322282

  9. Characterization of Leptospiral Chemoreceptors Using a Microscopic Agar Drop Assay.

    PubMed

    Affroze, Samia; Islam, Md Shafiqul; Takabe, Kyosuke; Kudo, Seishi; Nakamura, Shuichi

    2016-08-01

    Bacterial chemotaxis is induced by sensing chemical stimuli via chemoreceptors embedded in the cytoplasmic membrane, enabling the cells to migrate toward nutrients or away from toxins. The chemoreceptors of Escherichia coli and Salmonella spp. have been well studied and are functionally classified on the basis of detectable substrates. The spirochete Leptospira possesses more than ten chemoreceptors and shows attractive or repellent responses against some sugars, amino acids, and fatty acids. However, the roles of these chemoreceptors have not been investigated. In this study, we conducted a chemotaxis assay called microscopic agar drop assay in combination with competition experiments, determining whether two kinds of attractants are recognized by the same type of chemoreceptor in the saprophytic Leptospira strain, Leptospira biflexa. Analyzing the competition effect observed between several pairs of chemicals, we found that L. biflexa senses sugars via chemoreceptors different from those that sense amino acids and fatty acids. PMID:27109059

  10. Acidic precipitation

    SciTech Connect

    Martin, H.C.

    1987-01-01

    At the International Symposium on Acidic Precipitation, over 400 papers were presented, and nearly 200 of them are included here. They provide an overview of the present state of the art of acid rain research. The Conference focused on atmospheric science (monitoring, source-receptor relationships), aquatic effects (marine eutrophication, lake acidification, impacts on plant and fish populations), and terrestrial effects (forest decline, soil acidification, etc.).

  11. Comparison of ChromID Agar and Clostridium difficile Selective Agar for Effective Isolation of C. difficile from Stool Specimens

    PubMed Central

    Lee, Eun Joo

    2014-01-01

    Background ChromID Clostridium difficile agar (IDCd; bioMérieux SA, France) is a recently developed chromogenic medium for rapid and specific isolation of C. difficile. We compared the performance of IDCd with that of Clostridium difficile Selective Agar (CDSA). Methods A total of 530 fresh stool specimens were collected from patients with clinical signs compatible with C. difficile infection, and cultures for C. difficile were performed on IDCd and CDSA. C. difficile colonies were identified by spore staining, odor, use of an ANI identification test kit (bioMérieux SA), and multiplex PCR for tcdA, tcdB, and tpi. Results The concordance rate between IDCd and CDSA was 90.6% (480/530). The positivity rates on IDCd on days 1 and 2 (55.6% and 85.0%, respectively) were significantly higher than those on CDSA (19.4% and 75.6%, respectively) (P<0.001 for day 1 and P=0.02 for day 2), but the detection rates on IDCd and CDSA on day 3 were not different (89.4% vs. 82.8%, P=0.0914). On day 3, the recovery rates for non-C. difficile isolates on IDCd and CDSA were 30.2% (160/530) and 22.1% (117/530), respectively (P=0.0075). Clostridium spp. other than C. difficile were the most prevalent non-C. difficile isolates on both media. Conclusions The culture positivity rates on IDCd and CDSA were not different on day 3 but IDCd may allow for rapid and sensitive detection of C. difficile within 2 days of cultivation. PMID:24422190

  12. Measurements of temporal and spatial sequences of events in periodic precipitation processes

    NASA Astrophysics Data System (ADS)

    Kai, Shoichi; Müller, Stefan C.; Ross, John

    1982-02-01

    A series of new experiments on Liesegang ring (or band) formation is presented which is concerned with the temporal and spatial evolution of the process of structure formation. We have chosen NH4OH and MgSO4 to form rings of Mg(OH)2 precipitate in a gelatin gel, as well as KI and Pb(NO3)2 for periodic precipitation of PbI2 in an agar gel. A temporal sequence of events during the entire period from the start of a Liesegang experiment in a test tube to the completion of the final ring pattern has been determined at many locations in the tube by visual observations and by measurements of transmitted light, of scattered light, of deflection of the transmitted light beam, and of gravity effects. After diffusion of one electrolyte into the gel medium containing the second electrolyte results in an ion product larger than three times the solubility product, at any and all points in space, we observe the onset of homogeneous nucleation of colloidal particles by a steplike increase of the index of refraction. The colloid concentration and the particle number density at the nucleation site are estimated to be 10-2 mol/l and 1015 to 1016 cm-3, respectively. Nucleation is followed by the growth of colloidal particles which gives rise to distinct light scattering (turbidity). Both nucleation and colloid formation take place in space continuously; the fronts of these phenomena move through the system and obey a simple diffusion law. A substantial time interval after their passage, there arises a localized gradient of the index of refraction at the prospective ring positions which indicates onset of structure formation by means of a focusing mechanism. While the localized gradient becomes more pronounced and narrower in space, the turbidity in the regions on either side of the ring location decreases, which indicates a depletion in colloidal material in the neighboring zones. Eventually, a sharp band of visible precipitate appears, which is clearly separated from the preceding

  13. MRI Phantoms – Are There Alternatives to Agar?

    PubMed Central

    Hellerbach, Alexandra; Schuster, Verena; Jansen, Andreas; Sommer, Jens

    2013-01-01

    The suitability of different gelling agents as MRI phantoms was evaluated in terms of homogeneity, gel stability and reproducibility. Time and effort for preparation were also taken into account. The relaxation times of various gel compositions were estimated. Carbomer-980 and Carbopol-974P were determined to be promising novel phantom materials. These gelling agents are readily available, inexpensive and easy to handle given that thermal treatment is not required. Furthermore, the viscoelasticity of their polymer network is pH-dependent. With such characteristics, it was even possible to embed sensitive objects and retrieve them after testing. This was demonstrated with a fiber phantom for Diffusion Weighted MRI applications. Since Carbomer-980 and Carbopol-974P are non-hazardous, they are also suitable for multimodal setups (e.g., MRI as well as ultrasonic imaging). PMID:23940563

  14. Residual Agar Determination in Bacterial Spores by Electrospray Ionization Mass Spectrometry

    SciTech Connect

    Wahl, Karen L.; Colburn, Heather A.; Wunschel, David S.; Petersen, Catherine E.; Jarman, Kristin H.; Valentine, Nancy B.

    2010-02-15

    Presented here is an analytical method to detect residual agar from a bacterial spore sample as an indication of culturing on an agar plate. This method is based on the resolubilization of agar polysaccharide from a bacterial spore sample, enzymatic digestion, followed by electrospray ionization tandem mass spectrometry (ESI-MSn) analysis for detection of a specific agar fragment ion. A range of Bacillus species and strains were selected to demonstrate the effectiveness of this approach. The characteristic agar fragment ion was detected in the spores grown on agar that were washed from 1 to 5 times, irradiated or non-irradiated and not in the spores grown in broth. A sample containing approximately 108 spores is currently needed for confident detection of residual agar from culture on agar plates in the presence of bacterial spores with a limit of detection of approximately 1 ppm agar spiked into a broth-grown spore sample. The results of a proficiency test with 42 blinded samples are presented demonstrating the utility of this method with no false positives and only 3 false negatives for samples that were below the detection level of the method as documented.

  15. Green synthesis of gold nanoparticles of different sizes and shapes using agar-agar water solution and femtosecond pulse laser irradiation

    NASA Astrophysics Data System (ADS)

    Almeida de Matos, Ricardo; da Silva Cordeiro, Thiago; Elgul Samad, Ricardo; Dias Vieira, Nilson; Coronato Courrol, Lilia

    2012-11-01

    We report a method to create gold nanoparticles of different sizes and shapes using agar-agar water solution and irradiation with light from a xenon lamp, followed by ultrashort laser pulses. No additives, such as solvents, surfactants or reducing agents, were used in the procedure. Laser irradiation (laser ablation) was important to the reduction of the nanoparticles diameter and formation of another shapes. Distilled water was used as solvent and agar-agar (hydrophilic colloid extracted from certain seaweeds) was important for the stabilization of gold nanoparticles, avoiding their agglomeration. The formation of gold nanoparticles was confirmed with ultraviolet-visible absorption and TEM microscopy. The gold nanoparticles acquired spherical, prism, and rod shapes depending on the laser parameters. Variation of laser irradiation parameters as pulse energy, irradiation time and repetition rate was assessed. The relevant mechanisms contributing for the gold nanoparticles production are discussed.

  16. Screening of antifungal agents using ethanol precipitation and bioautography of medicinal and food plants.

    PubMed

    Schmourlo, Gracilene; Mendonça-Filho, Ricardo R; Alviano, Celuta Sales; Costa, Sônia S

    2005-01-15

    In the search for bioactive compounds, bioautography and ethanol precipitation of macromolecules (proteins, polysaccharides, etc.) of plant aqueous extracts were associated in an antifungal screening. Thus, the supernatants, precipitates (obtained by ethanol precipitation) and aqueous extracts were investigated of medicinal and fruit bearing plants used against skin diseases by the Brazilian population. The agar diffusion and broth dilution methods were used to assess the activity against three fungi: Candida albicans, Trichophyton rubrum and Cryptococcus neoformans. The results, evaluated by the diameter of the inhibition zone of fungal growth, indicate that six plant species, among the 16 investigated, showed significant antifungal activity. The minimal inhibitory concentration (MIC) was determined on plant extracts that showed high efficacy against the tested microorganisms. The most susceptible yeast was Trichophyton rubrum and the best antifungal activity was shown by Xanthosoma sagittifolium supernatant. The bioautography was performed only for the aqueous extracts and supernatants of those plants that showed antifungal activity against Candida albicans and Cryptococcus neoformans, using n-butanol/acetic acid/water (BAW) 8:1:1 to develop silica gel TLC plates. Clear inhibition zones were observed for aqueous extracts of Schinus molle (R(f) 0.89) and Schinus terebinthifolius (R(f) 0.80) against Candida albicans, as for supernatant of Anacardium occidentale (R(f) 0.31) against Cryptococcus neoformans. The separation of macromolecules from metabolites, as in the case of Anacardium occidentale, Solanum sp. and Xanthosoma sagittifolium, enhances antifungal activity. In other cases, the antifungal activity is destroyed, as observed for Momordica charantia, Schinus molle and Schinus terebinthifolius. PMID:15619579

  17. Glucose-sucrose-potassium tellurite-bacitracin agar, an alternative to mitis salivarius-bacitracin agar for enumeration of Streptococcus mutans.

    PubMed Central

    Tanzer, J M; Börjesson, A C; Laskowski, L; Kurasz, A B; Testa, M

    1984-01-01

    An agar medium for selective recovery and enumeration of Streptococcus mutans was developed as an alternative to mitis salivarius-bacitracin (MSB) agar. Combinations of dyes, antibiotics, and tellurite were added to a nonselective medium which, because of its sucrose content, allowed easy recognition of S. mutans colonies. Candle jar incubation for 2 days, by comparison with anaerobic incubation, reduced background flora but did not diminish S. mutans recoveries from clinical samples. Quantitative comparisons were made of the simultaneous recoveries of a number of authentic S. mutans serotype representatives and fresh clinical isolates, using various glucose-sucrose-potassium tellurite-bacitracin (GSTB) formulations and mitis salivarius, MSB, and blood agars. Mitis salivarius counts were not detectably different from blood counts, but counts on MSB were distinctly lower. A formulation of the new medium containing 5% glucose 5% sucrose, 0.001% potassium tellurite, 0.3 U of bacitracin per ml (hence GSTB), and 2% agar gave recoveries nearly equal to those on mitis salivarius agar and much greater than those on MSB. The medium yielded readily recognized S. mutans colonies and facilitated detection of intracellular polysaccharide formers upon flooding with I2 reagent. Freshly isolated serotype c, E, and f colonies could often be distinguished from serotype d and g colonies, a distinction made reliable by testing for intracellular polysaccharide. A study of 300 salivary samples revealed GSTB to give significantly higher recoveries than MSB. About 72% of all samples were substantially underestimated for S. mutans with MSB, and 6.7% of samples were falsely negative for S. mutans with MSB. Recovery of background flora on GSTB was as low or lower than on MSB, and both types of agar could be stored for at least 9 weeks without notable change of selectivity. Thus, GSTB agar appears to be simple and reliable to use and requires no anaerobic incubation. Caution is voiced about

  18. Fundamentals of gel dosimeters

    NASA Astrophysics Data System (ADS)

    McAuley, K. B.; Nasr, A. T.

    2013-06-01

    Fundamental chemical and physical phenomena that occur in Fricke gel dosimeters, polymer gel dosimeters, micelle gel dosimeters and genipin gel dosimeters are discussed. Fricke gel dosimeters are effective even though their radiation sensitivity depends on oxygen concentration. Oxygen contamination can cause severe problems in polymer gel dosimeters, even when THPC is used. Oxygen leakage must be prevented between manufacturing and irradiation of polymer gels, and internal calibration methods should be used so that contamination problems can be detected. Micelle gel dosimeters are promising due to their favourable diffusion properties. The introduction of micelles to gel dosimetry may open up new areas of dosimetry research wherein a range of water-insoluble radiochromic materials can be explored as reporter molecules.

  19. Physicochemical and morphological properties of plasticized poly(vinyl alcohol)-agar biodegradable films.

    PubMed

    Madera-Santana, T J; Freile-Pelegrín, Y; Azamar-Barrios, J A

    2014-08-01

    The effects of the addition of glycerol (GLY) on the physicochemical and morphological properties of poly(vinyl alcohol) (PVA)-agar films were reported. PVA-agar films were prepared by solution cast method, and the addition of GLY in PVA-agar films altered the optical properties, resulting in a decrease in opacity values and in the color difference (ΔE) of the films. Structural characterization using Fourier transformation infrared (FTIR) spectroscopy and X-ray diffraction (XRD) indicated that the presence of GLY altered the intensity of the bands (from 1200 to 800cm(-1)) and crystallinity. The characterization of the thermal properties indicated that an increase in the agar content produces a decrease in the melting temperature and augments the heat of fusion. Similar tendencies were observed in plasticized films, but at different magnification. The formulation that demonstrated the lowest mechanical properties contained 25wt.% agar, whereas the formulation that contained 75wt.% agar demonstrated a significant improvement. The water vapor transmission rate (WVTR) and surface morphology analysis demonstrated that the structure of PVA-agar films is reorganized upon GLY addition. The physicochemical properties of PVA-agar films using GLY as a plasticizer provide information for the application of this formulation as packaging material for specific food applications. PMID:24875313

  20. Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

    2015-01-22

    In this work, we report the successful fabrication of agar-based nanofibers by electrospinning technique, using water as solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operating at 50°C, to avoid agar gelation. Agar pure solution (1 wt%) showed inadequate spinnability regardless of the used electrospinning conditions. The addition of a co-blending polymer such as PVA (10 wt% starting solution) improved the solutions viscoelasticity and hence, the solutions spinnability. Agar/PVA solutions were prepared with different mass ratios (100/0, 50/50, 40/60, 30/70, 20/80 and 0/100) and electrospun at various sets of electrospinning conditions. Best nanofibers were obtained with 30/70 and 20/80 agar/PVA blends while samples with higher agar contents (50/50 and 40/60 agar/PVA) were harder to process and led to discontinuous fibrous mats. This first set of encouraging results can open a new window of opportunities for agar-based biomaterials in the form of nanofibers. PMID:25439904

  1. Inhibition of Streptococcus mutans strains by different mitis-salivarius agar preparations.

    PubMed Central

    Staat, R H

    1976-01-01

    Several Streptococcus mutans strains were markedly inhibited by mitis-salivarius agar manufactured by Baltimore Biological Laboratories, but little, if any, inhibition was noted using Difco Laboratories' mitis-salivarius agar. Supplementation of the basic medium with sucrose and bacitracin for specific selection of S. mutans resulted in suppression of representative S. mutans type a strains regardless of manufacturer. PMID:1270597

  2. Agar composition affects in vitro screening of biocontrol activity of antagonistic microorganisms.

    PubMed

    Bosmans, L; De Bruijn, I; De Mot, R; Rediers, H; Lievens, B

    2016-08-01

    Agar-based screening assays are the method of choice when evaluating antagonistic potential of bacterial biocontrol-candidates against pathogens. We showed that when using the same medium, but different agar compositions, the activity of a bacterial antagonist against Agrobacterium was strongly affected. Consequently, results from in vitro screenings should be interpreted cautiously. PMID:27166668

  3. Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties.

    PubMed

    Jumaidin, R; Sapuan, S M; Jawaid, M; Ishak, M R; Sahari, J

    2016-08-01

    The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc. PMID:27177458

  4. Efficacy of agar-plate culture in detection of Strongyloides stercoralis infection.

    PubMed

    Arakaki, T; Iwanaga, M; Kinjo, F; Saito, A; Asato, R; Ikeshiro, T

    1990-06-01

    Agar-plate culture of feces using a modified petri dish proved to be highly efficient in the detection of Strongyloides stercoralis infection. Furrows left by S. stercoralis on the agar plate were distinguished readily in size from those left by Necator americanus. PMID:2352073

  5. [Evaluation of a new medium, eggplant (Solanum melongena) agar as a screening medium for Cryptococcus neoformans in environmental samples].

    PubMed

    Sengul, Mustafa; Ergin, Cağrı; Kartal, Tuğba

    2014-04-01

    Cryptococcus neofomans is an encapsulated yeast-like fungus that causes life-threatening infections, especially in immunosuppresive patients. C.neoformans infection is believed to be acquired via inhalation of aerosolized particles from the environment. Avian guano, decaying tree hollows and soil are the related known environmental niches. Brown pigmented yeast growth from the precursors in growth media is an important step for the identification and isolation of C.neoformans. Seeds of plants in nature are preferred owing to easy accessibility and low costs for the preparation of such media. Guizotia abysinicca (Niger seed) as Staib agar, Helianthus annus (Sunflower) as Pal's medium, Brassica nigra (Mustard) agar, tobacco agar, Mucuna pruriens (Velvet bean) seed agar, Perilla frutescens (Beefsteak plant) seed agar, Rubus fruticosus (Blackberry) agar and ground red hot pepper agar are pigment-based selective media for the differentiation of C.neoformans. The aim of this study was to observe the pigment production of C.neoformans in a new medium based on eggplant (Solanum melongena) and also to compare its performance with the simplified Staib, Pal's and tobacco agar for isolation from the environment. Three different eggplant-based medium (S.melongena Melanzaza viserba, S.melongena Pinstripe F1 and S.ovigerum Ivory F1) were included in the study. Pigment-forming eggplant medium, simplified Staib agar, Pal's agar and tobacco agar were used for the cultivation of the environmental swabbed samples from 19 Eucalyptus camaldulensis trunk hollows in continuous colonization region. While pigment formation were observed with S.melongena Melanzaza viserba and S.melongena Pinstripe F1 containing media, S.ovigerum Ivory F1 medium was found to be non-reactive. In colonization area (Gökova-Akyaka, Turkey), 11 (57.9%) out of 19 E.camaldulensis samples were positive with simplified Staib agar, Pal's agar and eggplant agar while 10 (52.6%) of them are positive with tobacco agar. C

  6. Adsorptive removal of methylene blue by agar: effects of NaCl and ethanol

    PubMed Central

    2012-01-01

    Adsorption of methylene blue (MB) on agar was investigated as a function of temperature (308-328 K), different concentrations of NaCl and HCl and various weight percentages of binary mixtures of ethanol with water. It was observed that the maximum experimental adsorption capacity, qm, exp, in water is up to 50 mg g-1 and decreases with increase in weight percentage of ethanol and NaCl and HCl concentration compared to that of water. Analysis of data using ARIAN model showed that MB adsorbs as monomer and dimer on the surface of agar. Binding constants of MB to agar were calculated using the Temkin isotherm. The process is exothermic in water and other solutions. The mean adsorption energy (E) value indicated binding of MB to agar is chemical adsorption. Kinetics of this interaction obeys from the pseudo-second-order model and diffusion of the MB molecules into the agar is the main rate-controlling step. PMID:22339759

  7. Testosterone Nasal Gel

    MedlinePlus

    Testosterone nasal gel is used to treat symptoms of low testosterone in men who have hypogonadism (a condition in which the body does not produce enough natural testosterone). Testosterone nasal gel is used only for men ...

  8. Radiochemical study of the kinetics of crystal growth in gels

    NASA Astrophysics Data System (ADS)

    Cecal, Alexandru; Palamaru, Mircea; Juverdeanu, Anca; Giosan, Marcel

    1996-01-01

    A kinetic study was performed on nucleation and growth of crystals containing radioactive ions in gelatin and agar gels. The investigated crystals were: 60CoHPO 4, 60CoS, 60Co(OH) 2, 60Co(SCN) 2, 204Tl(OH) 3, and 204Tl[(C 2H 5) 2NCS 2] 3. The study shows that the crystal growth rate depends on the cation size and charge, the nature of anion as well as on the colloidal medium. The crystallisation process in the gel has two distinctive steps: diffusion of reactant ions in the gel followed by a chemical reaction which leads to nucleation of the crystal. Both steps are described quantitatively.

  9. Detection of Agar, by Analysis of Sugar Markers, Associated with Bacillus Anthracis Spores, After Culture

    SciTech Connect

    Wunschel, David S.; Colburn, Heather A.; Fox, Alvin; Fox, Karen F.; Harley, William M.; Wahl, Jon H.; Wahl, Karen L.

    2008-08-01

    Detection of small quantities of agar associated with spores of Bacillus anthracis could provide key information regarding its source or growth characteristics. Agar, widely used in growth of bacteria on solid surfaces, consists primarily of repeating polysaccharide units of 3,6-anhydro-L-galactose (AGal) and galactose (Gal) with sulfated and O-methylated galactoses present as minor constituents. Two variants of the alditol acetate procedure were evaluated for detection of potential agar markers associated with spores. The first method employed a reductive hydrolysis step, to stabilize labile anhydrogalactose, by converting to anhydrogalactitol. The second eliminated the reductive hydrolysis step simplifying the procedure. Anhydrogalactitol, derived from agar, was detected using both derivatization methods followed by gas chromatography-mass spectrometry (GC-MS) analysis. However, challenges with artefactual background (reductive hydrolysis) or marker destruction (hydrolysis) lead to the search for alternative sugar markers. A minor agar component, 6-O-methyl galactose (6-O-M gal), was readily detected in agar-grown but not broth-grown bacteria. Detection was optimized by the use of gas chromatography-tandem mass spectrometry (GC-MS-MS). With appropriate choice of sugar marker and analytical procedure, detection of sugar markers for agar has considerable potential in microbial forensics.

  10. Factors Affecting Selectivity of Brilliant Green-Phenol Red Agar for Salmonellae

    PubMed Central

    Moats, W. A.; Kinner, J. A.

    1974-01-01

    Commercial brilliant green (BG)-sulfa agar was found to be nonselective toward a test series of Enterobacteriaceae. Various formulations of BG were prepared by using Trypticase soy agar (BBL) as a base. Results were more reproducible when BG dye was added after sterilization than before. Sulfonamides improved selectivity as compared with brilliant green alone. Sulfanilamide (SN) was slightly more selective for salmonellae than other sulfonamides tested. Bile salts and sodium dodecyl sulfate markedly reduced the toxicity of BG to all the test bacteria. Enterobacter strains were most difficult to inhibit. A combination of 5 mg of BG and 1 g of SN/liter prevented growth of Proteus mirabilis and Escherichia coli and retarded growth of Enterobacter strains. The BG-SN agars were superior in selectivity to a series of commercial agars tested, and numbers of salmonellae recovered on BG-SN agar and Trypticase soy agar (BBL) were the same. Brilliant green agars with various degrees of selectivity are described. PMID:4589120

  11. Polymer film deposition on agar using a dielectric barrier discharge jet and its bacterial growth inhibition

    NASA Astrophysics Data System (ADS)

    Tsai, T.-C.; Cho, J.; Mcintyre, K.; Jo, Y.-K.; Staack, D.

    2012-08-01

    Polymer film deposition on agar in ambient air was achieved using the helium dielectric barrier discharge jet (DBD jet) fed with polymer precursors, and the bacterial growth inhibition due to the deposited film was observed. The DBD jet with precursor addition was more efficient at sterilization than a helium-only DBD jet. On the areas where polymer films cover the agar the bacterial growth was significantly inhibited. The inhibition efficacy showed dependence on the film thickness. The DBD jet without precursor also created a modified agar layer, which may slow the growth of some bacterial strains.

  12. Modeling of the Bacillus subtilis Bacterial Biofilm Growing on an Agar Substrate.

    PubMed

    Wang, Xiaoling; Wang, Guoqing; Hao, Mudong

    2015-01-01

    Bacterial biofilms are organized communities composed of millions of microorganisms that accumulate on almost any kinds of surfaces. In this paper, a biofilm growth model on an agar substrate is developed based on mass conservation principles, Fick's first law, and Monod's kinetic reaction, by considering nutrient diffusion between biofilm and agar substrate. Our results show biofilm growth evolution characteristics such as biofilm thickness, active biomass, and nutrient concentration in the agar substrate. We quantitatively obtain biofilm growth dependence on different parameters. We provide an alternative mathematical method to describe other kinds of biofilm growth such as multiple bacterial species biofilm and also biofilm growth on various complex substrates. PMID:26355542

  13. Modeling of the Bacillus subtilis Bacterial Biofilm Growing on an Agar Substrate

    PubMed Central

    Wang, Xiaoling; Wang, Guoqing; Hao, Mudong

    2015-01-01

    Bacterial biofilms are organized communities composed of millions of microorganisms that accumulate on almost any kinds of surfaces. In this paper, a biofilm growth model on an agar substrate is developed based on mass conservation principles, Fick's first law, and Monod's kinetic reaction, by considering nutrient diffusion between biofilm and agar substrate. Our results show biofilm growth evolution characteristics such as biofilm thickness, active biomass, and nutrient concentration in the agar substrate. We quantitatively obtain biofilm growth dependence on different parameters. We provide an alternative mathematical method to describe other kinds of biofilm growth such as multiple bacterial species biofilm and also biofilm growth on various complex substrates. PMID:26355542

  14. Effect of heat treatment on the performance of tryptose-sulfite-cycloserine agar for enumeration of Clostridium perfringens.

    PubMed

    Brodsky, M H; Ciebin, B W

    1979-05-01

    Dissolving dehydrated tryptose-sulfite-cycloserine agar by only boiling or microwaving was found to inhibit Clostridium perfringens colony development in pour plates when compared with C. perfringens recovery in tryptose-sulfite-cycloserine agar prepared by autoclaving. PMID:225988

  15. Starbursts and wispy drops in surfactants spreading on gels

    NASA Astrophysics Data System (ADS)

    Mukhopadhyay, Shomeek; Daniels, Karen E.; Behringer, Robert P.

    2004-11-01

    We report a phase diagram for a novel instability seen in drops of nonionic surfactant solution (Triton X-305) spreading on a viscoelastic agar gel substrate. This system allows us to examine the effect of varying the fluidity of an aqueous substrates. The instabilities of the surfactant drop are strongly influenced by the substrate fluidity. For the lowest agar concentration (below the gelation point), the drop breaks into approximately 10 thin spreading arms in a starburst formation. For substrates just below the gelation transition, the central drop remains but is decorated with thin, branching wisps. Above the gelation transition, the surfactant drops are circular as for a solid substrate. The phenomenon is only weakly dependent on the surfactant concentration, which has been varied over three orders of magnitude and across the critical micellar concentration. This work has been supported under NSF Grant DMR-0244498.

  16. A fresh liver agar substrate for rearing small numbers of forensically important blow flies (Diptera: Calliphoridae)

    USGS Publications Warehouse

    Gruner, Susan V.; Slone, Daniel H.

    2014-01-01

    Forensically important calliphorids can be reared on a mixture of beef liver and agar. Small pieces of meat, especially fresh or frozen beef liver, will desiccate in 2–6 h, but this simple-to-make feeding substrate remains moist for at least 12 h at 25 and 30°C without desiccation, even in small (5 g) amounts. We determined the survivorship of small numbers of Chrysomya megacephala (F.) (first-instar larvae to adult eclosion) raised on 5 g of liver agar and fresh beef liver. We found that all larvae raised on 5 g of liver died due to desiccation, but survivorship on 5 g of liver agar was equivalent to that on larger (50 g) pieces of either liver agar or beef liver.

  17. Preparation and characterization of hydrophobic superparamagnetic gel.

    SciTech Connect

    Liu, X.; Kaminski, M. D.; Guan, Y.; Chen, H.; Liu, H.; Rosengart, A. J.; Chemical Engineering; Univ. of Chicago; Pritzker School of Medicine; Chinese Academy of Sciences

    2006-01-01

    The present study describes the preparation and analysis of a highly concentrated hydrophobic oleic acid-coated magnetite gel. By contrast to conventional techniques to prepare magnetic fluids, herein the oleic acid was introduced as a reactant during the initial crystallization phase of magnetite that was obtained by the co-precipitation of Fe(II) and Fe(III) salts by addition of ammonium hydroxide. The resulting gelatinous hydrophobic magnetite was characterized in terms of morphology, particle size, magnetic properties, crystal structure, and hydrophobicity/hydrophilicity. This magnetic gel exhibited superparamagnetism with a saturation magnetization of 46.0 emu/g at room temperature and could be well dispersed both in polar and nonpolar carrier liquids. This protocol produced highly concentrated hydrophobic magnetic gel for biopolymer encapsulations.

  18. [THE APPLICATION OF SELECTIVE CHROMOGENIC AGAR FOR DETECTING ENTEROBACTERIA WITH PRODUCTION OF BETA-LACTAMASES].

    PubMed

    Korobova, A G; Frolova, L N; Kliasova, G A

    2015-11-01

    The detection of enterobacteria with production of beta-lactamases of extended spectrum in selective chromogenic agar was analyzed The results ofdetection of beta-lactamases of extended spectrum was compared with "double disc" technique. The smears from mucous membrane of guttur and rectum from patients were analyzed in parallel on solid growth agar (Endo or Mac Conkey) and on selective agar CHROMagartm ESBL (CHROMagar France). The production of beta-lactamases of extended spectrum was confirmed using "double discs" technique. To exclude hyper-production of ampC beta-lactamases E-test was applied containing cefotetan and cefotetan with cloxacillin. The sampling consisted of 1552 samples from patients. The study permitted to isolate 1243 strains of enterobacteria on agar Endo or Mac Conkey and 409 strains of enterobacteria on selective agar CHROMagartm ESBL (Escherichia coli n = 226, Klebsiella pneumoniae n = 105, enterobacter spp. n = 35, Citrobacter spp. n = 21, others n = 22). The application of "double discs" technique confirmed production of beta-lactamases of extended spectrum in 386 (94%) out of 409 strains isolated on agar CHROMagartm ESBL. In 23 (6%) of strains no confirmation was established and hyper-production of ampC of beta-lactamases was established 15 out of total. Additionally, 8 were sensitive to cephalosporin of third generation. All enterobacteria isolated on agar Endo or Mac Conkey also were tested by "double discs" technique. Overall, 394 strains of enterobacteria with production of beta-lactamases of extended spectrum were obtained. On all agars (agar Endo or Mac Conkey and CHROMagartm ESBL)--263 (67%) strains; only on CHROMagartm ESBL--123 (31%) and only on agar Endo or Mac Conkey--8 (2%) (p < 0.0001). The sensitivity of selective agar CHROMagartm ESBL made up to 98% and specificity--97%. The resolution about detection of enterobacteria producing beta-lactamases of extended spectrum were submitted to clinic in 18-24 hours after arrival

  19. Sol-Gel Glasses

    NASA Technical Reports Server (NTRS)

    Mukherjee, S. P.

    1985-01-01

    Multicomponent homogeneous, ultrapure noncrystalline gels/gel derived glasses are promising batch materials for the containerless glass melting experiments in microgravity. Hence, ultrapure, homogeneous gel precursors could be used to: (1) investigate the effect of the container induced nucleation on the glass forming ability of marginally glass forming compositions; and (2) investigate the influence of gravity on the phase separation and coarsening behavior of gel derived glasses in the liquid-liquid immiscibility zone of the nonsilicate systems having a high density phase. The structure and crystallization behavior of gels in the SiO2-GeO2 as a function of gel chemistry and thermal treatment were investigated. As are the chemical principles involved in the distribution of a second network former in silica gel matrix being investigated. The procedures for synthesizing noncrystalline gels/gel-monoliths in the SiO2-GeO2, GeO2-PbO systems were developed. Preliminary investigations on the levitation and thermal treatment of germania silicate gel-monoliths in the Pressure Facility Acoustic Levitator were done.

  20. Genome Sequence of the Agar-Degrading Marine Bacterium Alteromonadaceae sp. Strain G7

    PubMed Central

    Kwak, Min-Jung; Song, Ju Yeon; Kim, Byung Kwon; Chi, Won-Jae; Kwon, Soon-Kyeong; Choi, Soobeom; Chang, Yong-Keun

    2012-01-01

    Here, we present the high-quality draft genome sequence of the agar-degrading marine gammaproteobacterium Alteromonadaceae sp. strain G7, which was isolated from coastal seawater to be utilized as a bioresource for production of agar-derived biofuels. The 3.91-Mb genome contains a number of genes encoding algal polysaccharide-degrading enzymes such as agarases and sulfatases. PMID:23209220

  1. Low density, microcellular, dopable, agar/gelatin foams for pulsed power experiments

    SciTech Connect

    McNamara, W.F.; Aubert, J.H.

    1997-04-01

    Low-density, microcellular foams prepared from the natural polymers agar and gelatin have been developed for pulsed-power physics experiments. Numerous experiments were supported with foams having densities at or below 10 mg/cm{sup 3}. For some of the experiments, the agar/gelatin foam was uniformly doped with metallic elements using soluble salts. Depending on the method of preparation, cell sizes were typically below 10 microns and for one process were below 1.0 micron.

  2. Entrapment of α-Amylase in Agar Beads for Biocatalysis of Macromolecular Substrate

    PubMed Central

    Sharma, Manu; Sharma, Vinay; Majumdar, Dipak K.

    2014-01-01

    Attempts have been made to optimize immobilization parameters, catalytic property, and stability of immobilized α-amylase in agar. The work compares natural entrapment efficiency of agar with the ionotropically cross-linked agar hydrogel, with the advantage of easy scale-up and cost and time effectiveness. Beads prepared with 3% (w/v) agar and 75 mM calcium chloride and hardened for 20 minutes were selected for further studies on the basis of entrapment efficiency (80%) and physical stability. Following entrapment, pH and temperature optima of enzyme were shifted from 6 to 6.5 and 50 to 55°C, respectively. Michaelis constant (Km) for both free and entrapped enzymes remained the same (0.83%) suggesting no change in substrate affinity. However, Vmax⁡ of entrapped enzyme decreased ~37.5-fold. The midpoint of thermal inactivation for entrapped enzyme increased by 8 ± 1°C implying its higher thermal stability. The entrapped enzyme in calcium agar bead had an Ea value of 27.49 kcal/mol compared to 17.6 kcal/mol for free enzyme indicating increased stability on entrapment. Half-life of enzyme increased ~2.2 times after entrapment in calcium agar at 60°C indicating stabilization of enzyme. The reusability of beads was size dependent. Beads with diameter <710 μm were stable and could be reused for 6 cycles with ~22% loss in activity.

  3. Rapid detection of Clostridium perfringens: comparison of lactose sulfite broth with tryptose-sulfite-cycloserine agar.

    PubMed

    Neut, C; Pathak, J; Romond, C; Beerens, H

    1985-01-01

    The lactose sulfite (LS) medium recommended for the detection and identification of Clostridium perfringens in foods was compared with a reference method using tryptose-sulfite-cycloserine (TSC) agar for the enumeration of this organism in a variety of foods and food ingredients. C. perfringens was detected and enumerated in 17 of the 54 samples examined with LS broth, but its presence could be confirmed in only 9 of the samples with TSC agar. In only 2 instances, C. perfringens was detected on TSC agar but not in LS broth. A positive response (FeS + and gas +) in LS broth incubated at 46 degrees C always corresponded to the presence of C. perfringens; whereas the black colonies formed on TSC agar incubated at 37 degrees C were frequently found to be Clostridium species other than C. perfringens. Thus, because of its highly selective nature, LS broth was superior to TSC agar for enumerating and confirming the small numbers of C. perfringens that were present in a majority of the samples. This was especially true when other clostridia were also present. Besides its greater selectivity and sensitivity, LS broth had the additional advantages of requiring less work and giving confirmed results within 24-48 h compared with 3 days for the TSC agar method. PMID:2865247

  4. [GROWTH OF MICROMYCETES FROM DIFFERENT ECOLOGICAL NICHES ON AGAR NUTRIENT MEDIA].

    PubMed

    Kurchenko, I M; Yurieva, E M; Voychuk, S I

    2015-01-01

    Radial growth rate of (K(r)) 153 strains 6 species of micromycetes from different ecological niches was studied on 7 agar media: three standard (malt extract agar, potato-dextrose agar, Czapek's agar), and on agar media with plant polymers (carboxymethylcellulose, xylan, soluble starch and apple pectin). Endophytic and plant pathogenic strains (biotrophs) of all studied species did not differ significantly in their ability to grow on nutrient media of different composition--average values of K(r) for these two groups were the same (0,200 and 0,199 mm/h, respectively). Soil micromycetes (saprophytes) characterized by the lowest average growth rate (0,169 mm/h) and significantly differed from the endophytic and plant pathogenic ones. Average of the radial growth rates of studied microscopic fungi were higher on standard nutrient media than with plant polymers ones. Growth parameters of endophytes and plant pathogens of all studied species on various agar media differed from the soil strains. High growth rate of endophytic and plant pathogenic strains of Fusarium poae, Alternaria alternata and Ceratocystis sp. provides them the rapid colonization of plants. Penicillium funiculosum strains equally can exist as saprophytes in soil and as endophytic plant symbionts. A wide range of K(r) variation of endophytic dark pigmented Mycelia sterilia indicates the presence in this group of different species of micromycetes, which have no sporulation. PMID:26638483

  5. Growth of coagulase-negative staphylococci on colistin-nalidixic acid agar and susceptibility to polymyxins.

    PubMed

    Fung, J C; McKinley, G; Tyburski, M B; Berman, M; Goldstein, J

    1984-05-01

    Colistin-nalidixic acid agar, although recently recommended as a replacement for blood agar for primary plating of urine specimens ( Fung et al., J. Clin. Microbiol. 16:632-636, 1982), has also been reported to suppress the growth of some strains of staphylococci that are susceptible to colistin (polymyxin E). The susceptibility of 11 species of staphylococci to polymyxins was determined, and the ability of these species to grow on colistin-nalidixic acid agar was examined. Although the MICs for most of the strains tested were 8 micrograms/ml or less, only a few coagulase-negative staphylococci grew on or were inhibited by colistin-nalidixic acid agar. This descrepancy was explained by the antagonistic effects that medium components, such as physiological concentrations of magnesium and calcium and 5% sheep blood, had on the activity of polymyxin. Colistin-nalidixic acid agar is still recommended for routine urine processing; however, the poor growth of 13% of the Staphylococcus saprophyticus strains tested suggests that blood agar should be included in the primary plating battery of urine specimens obtained from female outpatients. PMID:6330170

  6. New gel method for growing large needles and single crystals of lead chloride

    NASA Astrophysics Data System (ADS)

    Abdulkhadar, M.; Ittyachen, M. A.

    1980-01-01

    Deviated from the normal way of crystal growth in gels, in the method reported, a two-stage chemical reaction in the gel has been made use of. In the first stage, one of the nutrients is incorporated in the gel as a colloidal precipitate and the other nutrient is allowed to diffuse into the gel and to produce the crystals in the second state. The reaction between the colloidal precipitate and the second nutrient is very similar to that between two nutrient solutions. This type of reaction has been found advantageous for growing large needles and single crystals of lead chloride.

  7. CONFORMANCE IMPROVEMENT USING GELS

    SciTech Connect

    Randall S. Seright

    2003-09-01

    This report describes work performed during the second year of the project, ''Conformance Improvement Using Gels.'' The project has two objectives. The first objective is to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective is to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil. Pore-level images from X-ray computed microtomography were re-examined for Berea sandstone and porous polyethylene. This analysis suggests that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than a gel-ripping mechanism. This finding helps to explain why aqueous gels can reduce permeability to water more than to oil. We analyzed a Cr(III)-acetate-HPAM gel treatment in a production well in the Arbuckle formation. The availability of accurate pressure data before, during, and after the treatment was critical for the analysis. After the gel treatment, water productivity was fairly constant at about 20% of the pre-treatment value. However, oil productivity was stimulated by a factor of 18 immediately after the treatment. During the six months after the treatment, oil productivity gradually decreased to approach the pre-treatment value. To explain this behavior, we proposed that the fracture area open to oil flow was increased substantially by the gel treatment, followed by a gradual closing of the fractures during subsequent production. For a conventional Cr(III)-acetate-HPAM gel, the delay between gelant preparation and injection into a fracture impacts the placement, leakoff, and permeability reduction behavior. Formulations placed as partially formed gels showed relatively low pressure gradients during placement, and yet substantially reduced the flow capacity of

  8. Selective agars for the isolation of Streptococcus iniae from Japanese flounder, Paralichthys olivaceus, and its cultural environment.

    PubMed

    Nguyen, H T; Kanai, K

    1999-05-01

    Two kinds of selective agar were developed for the isolation of Streptococcus iniae, the causal agent of streptococcosis, from Japanese flounder (Paralichthys olivaceus) and from culture tanks in flounder farms. The selective agars were heart infusion agar with added thallium acetate and oxlinic acid (TAOA), and colistin sulphate and oxolinic acid (CSOA). For samples containing various bacterial flora, selective agars were supplemented with defibrinated horse blood in order to distinguish beta-haemolytic colonies of Strep. iniae. Streptococcus iniae was quantitatively isolated from the brain and kidney of diseased flounders in pure culture. Two-thirds of isolates picked up from selective blood agars inoculated with intestinal samples were identified as Strep. iniae. The bacterial colony numbers of deposits and water from culture tanks on selective blood agars were about 10-10(5) times smaller than those on control heart infusion agar; Strep. iniae was isolated from few deposit and water samples. PMID:10347871

  9. CONFORMANCE IMPROVEMENT USING GELS

    SciTech Connect

    Randall S. Seright

    2004-09-30

    This report describes work performed during the third and final year of the project, ''Conformance Improvement Using Gels.'' Corefloods revealed throughput dependencies of permeability reduction by polymers and gels that were much more prolonged during oil flow than water flow. This behavior was explained using simple mobility ratio arguments. A model was developed that quantitatively fits the results and predicts ''clean up'' times for oil productivity when production wells are returned to service after application of a polymer or gel treatment. X-ray computed microtomography studies of gels in strongly water-wet Berea sandstone and strongly oil-wet porous polyethylene suggested that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than gel-ripping or gel-displacement mechanisms. In contrast, analysis of data from the University of Kansas suggests that the gel-ripping or displacement mechanisms are more important in more permeable, strongly water-wet sandpacks. These findings help to explain why aqueous gels can reduce permeability to water more than to oil under different conditions. Since cement is the most commonly used material for water shutoff, we considered when gels are preferred over cements. Our analysis and experimental results indicated that cement cannot be expected to completely fill (top to bottom) a vertical fracture of any width, except near the wellbore. For vertical fractures with apertures less than 4 mm, the cement slurry will simply not penetrate very far into the fracture. For vertical fractures with apertures greater than 4 mm, the slurry may penetrate a substantial distance into the bottom part of the fracture. However, except near the wellbore, the upper part of the fracture will remain open due to gravity segregation. We compared various approaches to plugging fractures using gels, including (1) varying polymer content, (2) varying placement (extrusion) rate, (3) using partially formed gels, (4

  10. Mass production of spores of lactic acid-producing Rhizopus oryzae NBRC 5384 on agar plate.

    PubMed

    Yamane, Tsuneo; Tanaka, Ryosuke

    2013-01-01

    Mass production of sporangiospores (spores) of Rhizopus oryzae NBRC 5384 (identical to NRRL 395 and ATCC 9363) on potato-dextrose-agar medium was studied aiming at starting its L(+)-lactic acid fermentation directly from spore inoculation. Various parameters including harvest time, sowed spore density, size of agar plate, height of air space, and incubation mode of plate (agar-on-bottom or agar-on-top) were studied. Ordinarily used shallow Petri dishes were found out to be unsuitable for the full growth of R. oryzae sporangiophores. In a very wide range of the sowed spore density, the smaller it was, the greater the number of the harvested spores was. It was also interesting to find out that R. oryzae grown downward vertically with a deep air space in an agar-on-top mode gave larger amount of spores than in an agar-on-bottom mode at 30°C for 7-day cultivation. Scale-up of the agar plate culture from 26.4 to 292 cm(2) was studied, resulting in the proportional relationship between the number of the harvested spores/plate and the plate area in the deep Petri dishes. The number of plates of 50 cm in diameter needed for 100 m(3) industrial submerged fermentation started directly from 2 × 10(5) spores/mL inoculum size was estimated as about 6, from which it was inferred that such a fermentation would be feasible. Designing a 50 cm plate and a method of spreading and collecting the spores were suggested. Bioprocess technological significance of the "full-scale industrial submerged fermentation started directly from spore inoculation omitting pre-culture" has been discussed. PMID:23658025

  11. Evaluation of CP Chromo Select Agar for the enumeration of Clostridium perfringens from water.

    PubMed

    Manafi, Mammad; Waldherr, Kerstin; Kundi, Michael

    2013-10-01

    The European Directive on drinking water quality has included mCP agar as the reference method for recovering Clostridium perfringens from drinking waters. In the present study, three media (mCP, TSCF and CP Chromo Select Agar) were evaluated for recovery of C. perfringens in different surface water samples. Out of 139 water samples, using a membrane filtration technique, 131 samples (94.2%) were found to be presumptively positive for C. perfringens in at least one of the culture media. Green colored colonies on CP Chromo Select Agar (CCP agar) were counted as presumptive C. perfringens isolates. Out of 483 green colonies on CCP agar, 96.3% (465 strains, indole negative) were identified as C. perfringens, and 15 strains (3.1%) were indole positive and were identified as Clostridium sordellii, Clostridium bifermentans or Clostridium tetani. Only 3 strains (0.6%) gave false positive results and were identified as Clostridium fallax, Clostridium botulinum, and Clostridium tertium. Variance analysis of the data obtained shows statistically no significant differences in the counts obtained between media employed in this work. The mCP method is very onerous for routine screening and bacterial colonies could not be used for further biochemical testing. The colonies on CCP and TSCF were easy to count and subculture for confirmation tests. TSCF detects sulfite-reducing clostridia, including species other than C. perfringens, and in some cases excessive blackening of the agar frustrated counting of the colonies. If the contamination was too high, TSCF did not consistently produce black colonies and as a consequence, the colonies were white and gave false negative results. On the other hand, the identification of typical and atypical colonies isolated from all media demonstrated that CCP agar was the most useful medium for C. perfringens recovery in water samples. PMID:23816139

  12. Performance of CHROMAGAR candida and BIGGY agar for identification of yeast species

    PubMed Central

    Yücesoy, Mine; Marol, Serhat

    2003-01-01

    Background The importance of identifying the pathogenic fungi rapidly has encouraged the development of differential media for the presumptive identification of yeasts. In this study two differential media, CHROMagar Candida and bismuth sulphite glucose glycine yeast agar, were evaluated for the presumptive identification of yeast species. Methods A total number of 270 yeast strains including 169 Candida albicans, 33 C. tropicalis, 24 C. glabrata, 18 C. parapsilosis, 12 C. krusei, 5 Trichosporon spp., 4 C. kefyr, 2 C. lusitaniae, 1 Saccharomyces cerevisiae and 1 Geotrichum candidum were included. The strains were first identified by germ tube test, morphological characteristics on cornmeal tween 80 agar and Vitek 32 and API 20 C AUX systems. In parallel, they were also streaked onto CHROMagar Candida and bismuth sulphite glucose glycine yeast agar plates. The results were read according to the color, morphology of the colonies and the existance of halo around them after 48 hours of incubation at 37°C. Results The sensitivity and specificity values for C. albicans strains were found to be 99.4, 100% for CHROMagar Candida and 87.0, 75.2% for BiGGY agar, respectively. The sensitivity of CHROMagar Candida to identify C. tropicalis, C. glabrata and C. krusei ranged between 90.9 and 100% while the specificity was 100%. The sensitivity rates for BiGGY agar were 66.6 and 100% while the specificity values were found to be 95.4 and 100% for C. tropicalis and C. krusei, respectively. Conclusions It can be concluded that the use of CHROMagar Candida is an easy and reliable method for the presumptive identification of most commonly isolated Candida species especially C. albicans, C. tropicalis and C. krusei. The lower sensitivity and specificity of BiGGY agar to identify commonly isolated Candida species potentially limits the clinical usefulness of this agar. PMID:14613587

  13. PRECIPITATION OF PLUTONOUS PEROXIDE

    DOEpatents

    Barrick, J.G.; Manion, J.P.

    1961-08-15

    A precipitation process for recovering plutonium values contained in an aqueous solution is described. In the process for precipitating plutonium as plutonous peroxide, hydroxylamine or hydrazine is added to the plutoniumcontaining solution prior to the addition of peroxide to precipitate plutonium. The addition of hydroxylamine or hydrazine increases the amount of plutonium precipitated as plutonous peroxide. (AEC)

  14. CONFORMANCE IMPROVEMENT USING GELS

    SciTech Connect

    Randall S. Seright

    2004-03-01

    This technical progress report describes work performed from September 1, 2003, through February 29, 2004, for the project, ''Conformance Improvement Using Gels.'' We examined the properties of several ''partially formed'' gels that were formulated with a combination of high and low molecular weight HPAM polymers. After placement in 4-mm-wide fractures, these gels required about 25 psi/ft for brine to breach the gel (the best performance to date in fractures this wide). After this breach, stabilized residual resistance factors decreased significantly with increased flow rate. Also, residual resistance factors were up to 9 times greater for water than for oil. Nevertheless, permeability reduction factors were substantial for both water and oil flow. Gel with 2.5% chopped fiberglass effectively plugged 4-mm-wide fractures if a 0.5-mm-wide constriction was present. The ability to screen-out at a constriction appears crucial for particulate incorporation to be useful in plugging fractures. In addition to fiberglass, we examined incorporation of polypropylene fibers into gels. Once dispersed in brine or gelant, the polypropylene fibers exhibited the least gravity segregation of any particulate that we have tested to date. In fractures with widths of at least 2 mm, 24-hr-old gels (0.5% high molecular weight HPAM) with 0.5% fiber did not exhibit progressive plugging during placement and showed extrusion pressure gradients similar to those of gels without the fiber. The presence of the fiber roughly doubled the gel's resistance to first breach by brine flow. The breaching pressure gradients were not as large as for gels made with high and low molecular weight polymers (mentioned above). However, their material requirements and costs (i.e., polymer and/or particulate concentrations) were substantially lower than for those gels. A partially formed gel made with 0.5% HPAM did not enter a 0.052-mm-wide fracture when applying a pressure gradient of 65 psi/ft. This result

  15. Modeling chemoresponsive polymer gels.

    PubMed

    Kuksenok, Olga; Deb, Debabrata; Dayal, Pratyush; Balazs, Anna C

    2014-01-01

    Stimuli-responsive gels are vital components in the next generation of smart devices, which can sense and dynamically respond to changes in the local environment and thereby exhibit more autonomous functionality. We describe recently developed computational methods for simulating the properties of such stimuli-responsive gels in the presence of optical, chemical, and thermal gradients. Using these models, we determine how to harness light to drive shape changes and directed motion in spirobenzopyran-containing gels. Focusing on oscillating gels undergoing the Belousov-Zhabotinksy reaction, we demonstrate that these materials can spontaneously form self-rotating assemblies, or pinwheels. Finally, we model temperature-sensitive gels that encompass chemically reactive filaments to optimize the performance of this system as a homeostatic device for regulating temperature. These studies could facilitate the development of soft robots that autonomously interconvert chemical and mechanical energy and thus perform vital functions without the continuous need of external power sources. PMID:24498954

  16. Monolithic diphasic gels of mullite by sol-gel process under ultrasound stimulation.

    PubMed

    Vollet, D R; Donatti, D A; Domingos, R N; de Oliveira, I

    1998-06-01

    Diphasic gel in the mullite composition was prepared from a colloidal sol of boehmite mixed with a hydrolyzed tetraethoxisilane (TEOS) solution. The boehmite sol was obtained by peptization of a poorly crystallized or very small mean crystallite size (approximately 34 A) precipitate, resulting from the reaction between solutions of aluminum sulfate and sodium hydroxide. Ultrasound was utilized in the processes of the TEOS hydrolysis and the boehmite peptization, and also for complete homogenization of the mixture to gel. The wet gel is almost clear and monolithic. The gel transparency is lost on drying, when syneresis has ended, so that the interlinked pore structure starts to empty and is recovered upon water re-absorption. Cracking closely accompanies this critical drying process. Differential thermal analysis (DTA) and X-ray diffraction (XRD) show that the solid structure of the gel is composed of an amorphous silica phase, as a matrix, and a colloidal sized crystalline phase of boehmite. Upon heat treatment, the boehmite phase within the gel closely follows the same transition sequence as in pure alumina shifted towards higher temperatures. Orthorhombic mullite formation was detected at 1300 degrees C. PMID:11270341

  17. Gels from mixed ligand silver(I) carboxylates: a promising approach for gel formation utilizing surface modifications.

    PubMed

    Yoon, Sungho; Kwon, Won Jong; Piao, Longhai; Kim, Sang-Ho

    2007-07-31

    Mixtures of Ag(hexanoate) and Ag(palmitate) give thermoreversible gels at very low concentration in toluene. The framework of the gel is composed of the branched nanosized fibers, contrary to the microsized wire precipitates of silver(I) carboxylates. The randomness of mixed-ligand silver(I) carboxylate polymeric chains hinders the crystallization process, resulting in very thin fibrils. This may be a new approach to design and control the properties of materials, which do not have properties involving gels or nanostructures in a conventional process. PMID:17602577

  18. Preparation and characterization of bio-nanocomposite films of agar and silver nanoparticles: laser ablation method.

    PubMed

    Rhim, Jong-Whan; Wang, Long-Feng; Lee, Yonghoon; Hong, Seok-In

    2014-03-15

    Silver nanoparticles (AgNPs) were prepared by a laser ablation method and composite films with the AgNPs and agar were prepared by solvent casting method. UV-vis absorbance test and transmission electron microscopy (TEM) analysis results revealed that non-agglomerated spherical AgNPs were formed by the laser ablation method. The surface color of the resulting agar/AgNPs films exhibited the characteristic plasmonic effect of the AgNPs with the maximum absorption peaks of 400-407 nm. X-ray diffraction (XRD) test results also exhibited characteristic AgNPs crystals with diffraction peaks observed at 2θ values of 38.39°, 44.49°, and 64.45°, which were corresponding to (111), (200), and (220) crystallographic planes of face-centered cubic (fcc) silver crystals, respectively. Thermogravimetric analysis (TGA) results showed that thermal stability of the agar/AgNPs composite films was increased by the inclusion of metallic silver. Water vapor barrier properties and surface hydrophobicity of the agar/AgNPs films increased slightly with the increase in AgNPs content but they were not statistically significant (p>0.05), while mechanical strength and stiffness of the composite films decreased slightly (p<0.05). The agar/AgNPs films exhibited distinctive antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli O157:H7) bacterial pathogens. PMID:24528754

  19. Antimicrobial and physical-mechanical properties of agar-based films incorporated with grapefruit seed extract.

    PubMed

    Kanmani, Paulraj; Rhim, Jong-Whan

    2014-02-15

    The use of synthetic petroleum based packaging films caused serious environmental problems due to their difficulty in recycling and poor biodegradability. Therefore, present study was aimed to develop natural biopolymer-based antimicrobial packaging films as an alternative for the synthetic packaging films. As a natural antimicrobial agent, grapefruit seed extract (GSE) has been incorporated into agar to prepare antimicrobial packaging film. The films with different concentrations of GSE were prepared by a solvent casting method and the resulting composite films were examined physically and mechanically. In addition, the films were characterized by FE-SEM, XRD, FT-IR and TGA. The incorporation of GSE caused increase in color, UV barrier, moisture content, water solubility and water vapor permeability, while decrease in surface hydrophobicity, tensile strength and elastic modulus of the films. As the concentration of GSE increased from 0.6 to 13.3 μg/mL, the physical and mechanical properties of the films were affected significantly. The addition of GSE changed film microstructure of the film, but did not influence the crystallinity of agar and thermal stability of the agar-based films. The agar/GSE films exhibited distinctive antimicrobial activity against three test food pathogens, such as Listeria monocytogenes, Bacillus cereus and Escherichia coli. These results suggest that agar/GSE films have potential to be used in an active food packaging systems for maintaining food safety and extending the shelf-life of the packaged food. PMID:24507339

  20. Characterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose.

    PubMed

    Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2014-09-22

    Crystallized nanocellulose (CNC) was separated from paper-mulberry (Broussonetia kazinoki Siebold) bast pulp by sulfuric acid hydrolysis method and they were blended with agar to prepare bionanocomposite films. The effect of CNC content (1, 3, 5 and 10 wt% based on agar) on the mechanical, water vapor permeability (WVP), and thermal properties of the nanocomposites were studied. Changes of the cellulose fibers in structure, morphology, crystallinity, and thermal properties of the films were evaluated using FT-IR, TEM, SEM, XRD, and TGA analysis methods. The CNC was composed of fibrous and spherical or elliptic granules of nano-cellulose with sizes of 50-60 nm. Properties of agar film such as mechanical and water vapor barrier properties were improved significantly (p<0.05) by blending with the CNC. The tensile modulus and tensile strength of agar film increased by 40% and 25%, respectively, in the composite film with 5 wt% of CNC, and the WVP of agar film decreased by 25% after formation of nanocomposite with 3 wt% of CNC. The CNC obtained from the paper-mulberry bast pulp can be used as a reinforcing agent for the preparation of bio-nanocomposites, and they have a high potential for the development of completely biodegradable food packaging materials. PMID:24906782

  1. Strategies to improve the mechanical strength and water resistance of agar films for food packaging applications.

    PubMed

    Sousa, Ana M M; Gonçalves, Maria P

    2015-11-01

    Agar films possess several properties adequate for food packaging applications. However, their high cost-production and quality variations caused by physiological and environmental factors affecting wild seaweeds make them less attractive for industries. In this work, native (NA) and alkali-modified (AA) agars obtained from sustainably grown seaweeds (integrated multi-trophic aquaculture) were mixed with locust bean gum (LBG) to make 'knife-coated' films with fixed final concentration (1 wt%) and variable agar/LBG ratios. Agar films were easier to process upon LBG addition (viscosity increase and gelling character decrease of the film-forming solutions observed by dynamic oscillatory and steady shear measurements). The mechanical properties and water resistance were optimal for films with 50 and/or 75% LBG contents and best in the case of NA (cheaper to extract). These findings can help reduce the cost-production of agar packaging films. Moreover, the controlled cultivation of seaweeds can provide continuous and reliable feedstock for transformation industries. PMID:26256341

  2. Cost-effective nanoporous Agar-Agar polymer/Nickel powder composite particle for effective bio-products adsorption by expanded bed chromatography.

    PubMed

    Asgari, Setareh; Jahanshahi, Mohsen; Rahimpour, Ahmad

    2014-09-26

    In the present work a novel kind of dense nanoporous composite matrix for expanded bed application has been successfully first prepared with Nickel powder as a densifier and was covered with Agar-Agar layer as a skeleton, through the method of water-in-oil emulsification. Agar-Agar is a porous and inexpensive polymer. In order to fabricate cost-effective adsorbent with favorable qualities Agar-Agar polymer was used. Thereafter, the customized composite particle was modified by pseudo-affinity dye-ligand, Reactive Blue 4 (RB4), aimed at preparing a pseudo-affinity adsorbent (RB4-Agar-Ni) for bioprodut adsorption from aqueous solution. Bovine Serum Albumin (BSA) was selected as a model protein to investigate the adsorption behavior in batchwise and expanded bed chromatography, and the obtained results were evaluated with that of Streamline™ (Amersham-Pharmacia Biotech, Sweden). Spherical appearance and porous structure of composite particles were observed by the optical microscope (OM) and scanning electronic microscope (SEM). The results suggested that the matrices followed the logarithmic normal size distribution with the range of 65-300 μm and average diameter of 126.81-151.47 μm, proper wet density of 1.64-2.78 g/ml, water content of 62.74-34%, porosity of 98-90% and pore size of about 38-130 nm. For better comprehension of the impact of solid phase properties on the performance of the expanded bed, the expansion and hydrodynamic properties of a composite matrix with a series of densities was evaluated and estimated by the retention time distribution method (RTD) in an expanded bed and was compared with that of other matrices. According to obtained results the expansion factors under the same fluid velocity decreased by increasing the matrix density. Moreover, the axial dispersion coefficient (Dax) is the most appropriate parameter for evaluating the stability of expanded bed, on various operating conditions, such as different flow velocity, bed expansion

  3. Comparison of a new, bismuth-iron-sulfite-cycloserine agar for isolation of Clostridium perfringens with the tryptose-sulfite-cycloserine and blood agars.

    PubMed

    Gubash, S M; Ingham, L

    1997-02-01

    A new differential and selective, bismuth-iron-sulfite-cycloserine (BISC) medium, for isolation and enumeration of Clostridium perfringens from food and feces, was developed. The medium was compared with the widely-used tryptose-sulfite-cycloserine (TSC) medium and blood agar (BA) in recovering actively growing cells, cold- (refrigerated and frozen) stressed, and heat-stressed C. perfringens cells, and heat-activated spores from human feces. Both selective media were satisfactory in recovering actively growing cells and heat-activated spores of C. perfringens. Both were inferior to non-inhibitory blood agar in recovering heat or cold-stressed cells. The advantages of the new BISC medium over the TSC medium were: elimination of the need to prepare pour- or overlay-agar plates, which simplified inoculation of specimens on the medium and simplified the subcultures of colonies for confirmatory identification. All colonies of C. perfringens developed on BISC were black or dark gray. This was contrary to TSC medium, which gave, on average, 39.6% of white colonies when inoculated with the pure cultures of C. perfringens. PMID:9084113

  4. Ultrasonic Imaging of the Electroacoustic Effect in Macromolecular Gels

    PubMed Central

    Wen, Han; Balaban, Robert S.

    2010-01-01

    The electroacoustic effect occurs in electrolytes and colloidal suspensions. It describes the phenomenon in which a voltage applied to the sample produces an acoustic signal or vice versa. The basic mechanism is that charged particles in the sample have various mobilities due to different masses and viscosities. Under an external voltage they respond differently to the electrical force. This results in an overall acoustic vibration. The electroacoustic effect has been the basis for many measurement tools of solutions and other materials. In this note a method to image macromolecular gel samples using the electroacoustic effect at ultrasound frequencies is presented. Radio-frequency electrical excitation produces ultrasonic signal due to spatial changes in the electroacoustic sonic amplitude of the sample, which is used to construct an image similar to ultrasonography. This method is demonstrated in agar gel and eggwhite protein phantoms. The image contrast mechanism is also discussed. PMID:10197349

  5. Effect of Diethylaminoethyl Dextran on the Growth of Mycoplasma in Agar

    PubMed Central

    Tauraso, Nicola M.

    1967-01-01

    The growth of certain strains of Mycoplasma is inhibited by substances present in commercial agar preparations. The addition of diethylaminoethyl (DEAE) dextran (10 mg per 100 ml) to agar media appears to enhance the growth of some strains. Of eight strains initially tested, the presence of DEAE dextran grossly enhanced the growth of three strains. One strain appeared not to be affected, and a clearly enhancing effect was not evident with four strains. Quantitative studies revealed that growth enhancement varied from 10 colony-forming units (CFU) for M. hominis type II (strain Campo) to 103.3 CFU for M. pulmonis (strain 880). The growth-enhancing effect is probably due to the ability of DEAE dextran to bind the sulfated polysaccharide moieties in agar and not to the DEAE dextran, per se. Images PMID:6025444

  6. An agar diffusion study comparing the antimicrobial activity of Nanoseal with some other endodontic sealers.

    PubMed

    Aal-Saraj, Ali Burak; Ariffin, Zaihan; Masudi, Sam'an Malik

    2012-08-01

    The aim of this study was to evaluate the antimicrobial activity of a new experimental nano-hydroxyapatite epoxy resin-based sealer (Nanoseal) with several other commercially available sealers; AH26, Tubliseal, Sealapex and Roekoseal against Enterococcus faecalis, Pseudomonas aeruginosa, Streptococcus mutans, Streptococcus sobrinus and Escherichia coli for up to 7 days. Agar diffusion was used in this study. Fifty Muller-Hinton agar plates were prepared and divided into five experimental groups (n = 10), for each micro-organism. Another 10 agar plates were used as positive and negative controls. Endodontic sealers were tested against each micro-organism. Inhibition zones produced were recorded. The results of this study showed that all test materials exhibited inhibition zones towards the tested micro-organisms for 7 days except for Roekoseal, which showed no inhibition zones. Nanoseal and AH26 exhibited similar zones of inhibition. Significant difference was found between Nanoseal and the other tested sealers (P < 0.001). PMID:22827817

  7. Blood agar to detect virulence factors in tap water heterotrophic bacteria.

    PubMed Central

    Payment, P; Coffin, E; Paquette, G

    1994-01-01

    Cytolytic colonies were found in 57% of tap water samples, and up to 6% of samples were found to contain bacteria having three or more virulence factors. The factors evaluated were cytotoxicity, hemolysis, cell adherence, and cell invasiveness. Overall, 17% of the samples contained cytolytic colonies that were adherent and hemolytic. Among the media tested, tryptic soy agar with sheep blood (incubated at 35 degrees C for 48 h) was the best medium for the detection of cytolytic colonies. Of the colonies growing on this medium, 13% were cytolytic, whereas on medium R2A, less than 3% were cytolytic. Furthermore, when tryptic soy agar with blood was used, 24% of the samples contained colonies with at least three virulence factors whereas only 5% were positive with R2A. Routine monitoring by using tryptic soy agar with sheep blood is suggested as an appropriate procedure for the detection of bacteria with pathogenic potential in drinking water. PMID:8017913

  8. [DNA and chemical analyses of commercial fly agaric-related products].

    PubMed

    Maruyama, Takuro; Kawahara, Nobuo; Fukiharu, Toshimitsu; Yokoyama, Kazumasa; Makino, Yukiko; Goda, Yukihiro

    2005-04-01

    Since June 6, 2002, psilocin and psilocybin-containing fungi (commonly called "magic mushrooms") have been regulated by the Narcotics and Psychotropics Control Law in Japan. However, various fly agaric-related products are now entering the Japanese market via the internet. In this study, fly agaric-related products available in this way were investigated for raw materials by DNA analysis and for additives by chemical analysis. Nucleotide sequence analysis of the mitochondrial 12S rDNA region suggested that these fly agaric-related products originate from A. muscaria or A. muscaria var. persicina. Furthermore, they were classified into three strains based on the ITS2-LSU nucleotide sequence. Harmine derivatives and/or tryptamine derivatives were detected in some of these products by LC/MS analysis. In accordance with this, the matK gene of Peganum harmala was found in all of the harmine derivative-containing samples. PMID:16018591

  9. Homogeneous Matrix Deposition on Dried Agar for MALDI Imaging Mass Spectrometry of Microbial Cultures

    NASA Astrophysics Data System (ADS)

    Hoffmann, Thomas; Dorrestein, Pieter C.

    2015-11-01

    Matrix deposition on agar-based microbial colonies for MALDI imaging mass spectrometry is often complicated by the complex media on which microbes are grown. This Application Note demonstrates how consecutive short spray pulses of a matrix solution can form an evenly closed matrix layer on dried agar. Compared with sieving dry matrix onto wet agar, this method supports analyte cocrystallization, which results in significantly more signals, higher signal-to-noise ratios, and improved ionization efficiency. The even matrix layer improves spot-to-spot precision of measured m/z values when using TOF mass spectrometers. With this technique, we established reproducible imaging mass spectrometry of myxobacterial cultures on nutrient-rich cultivation media, which was not possible with the sieving technique.

  10. Growth kinetics of Salmonella enterica in Hajna tetrathionate broth, Rappaport broth and modified semisolid Rappaport agar

    PubMed Central

    FUJIHARA, Masatoshi; TABUCHI, Hiroyuki; UEGAKI, Kaho

    2015-01-01

    To determine the appropriate method for isolating Salmonella enterica, we compared the growth of S. enterica serovars using three selective enrichment media. S. enterica was more successfully isolated from artificially contaminated fecal samples after enrichment in Hajna tetrathionate broth or modified semisolid Rappaport agar than in Rappaport broth. Since most bacteria (other than motile S. enterica) do not migrate on modified semisolid Rappaport agar, the growth characteristics of S. enterica can be interpreted easily and quickly. Two S. enterica isolates did not migrate on modified semisolid Rappaport agar, but did grow in Hajna tetrathionate broth, which suggests that the combined use of these selective enrichment media is appropriate for isolating S. enterica. PMID:26498402

  11. Assessment of Etest as an alternative to agar dilution for antimicrobial susceptibility testing of Neisseria gonorrhoeae.

    PubMed

    Liu, Hsi; Taylor, Thomas H; Pettus, Kevin; Trees, David

    2014-05-01

    We studied whether the Etest can be used as an alternative to agar dilution to determine antimicrobial susceptibilities of ceftriaxone, cefixime, and cefpodoxime in Neisseria gonorrhoeae surveillance. One hundred fifteen clinical and laboratory isolates of N. gonorrhoeae were tested following the Clinical Laboratory Improvement Amendments (CLIA)-approved CLSI standard agar dilution method and, separately, by the Etest according to the manufacturer's recommendations. The MICs were determined and compared. Ten laboratory-generated mutants were used to simulate substantially nonsusceptible specimens. The Etest and agar dilution methods were well correlated. Statistical tests produced regression R2 values of 88%, 82%, and 85% and Pearson correlation coefficients of 92%, 91%, and 92% for ceftriaxone, cefixime, and cefpodoxime, respectively. When paired comparisons were made, the two tests were 88.7%, 80%, and 87% within 1 log2 dilution from each other for ceftriaxone, cefixime, and cefpodoxime, respectively. The within-2-log2 agreements were 99.1%, 98.3%, and 94.8% for ceftriaxone, cefixime, and cefpodoxime, respectively. Notwithstanding the good correlations and the within-2-log2 general agreement, the Etest results produced slightly lower MICs than the agar dilution results. In conclusion, we found that the Etest can be effectively used as an alternative to agar dilution testing to determine the susceptibility of N. gonorrhoeae to ceftriaxone, cefixime, and cefpodoxime, although we recommend further research into extremely resistant isolates. For isolates within the typical range of clinical MICs, reexamination of the Etest interpretation of susceptible and nonsusceptible categories would likely allow for successful transition from agar dilution to the Etest. PMID:24554750

  12. Assessment of Etest as an Alternative to Agar Dilution for Antimicrobial Susceptibility Testing of Neisseria gonorrhoeae

    PubMed Central

    Taylor, Thomas H.; Pettus, Kevin; Trees, David

    2014-01-01

    We studied whether the Etest can be used as an alternative to agar dilution to determine antimicrobial susceptibilities of ceftriaxone, cefixime, and cefpodoxime in Neisseria gonorrhoeae surveillance. One hundred fifteen clinical and laboratory isolates of N. gonorrhoeae were tested following the Clinical Laboratory Improvement Amendments (CLIA)-approved CLSI standard agar dilution method and, separately, by the Etest according to the manufacturer's recommendations. The MICs were determined and compared. Ten laboratory-generated mutants were used to simulate substantially nonsusceptible specimens. The Etest and agar dilution methods were well correlated. Statistical tests produced regression R2 values of 88%, 82%, and 85% and Pearson correlation coefficients of 92%, 91%, and 92% for ceftriaxone, cefixime, and cefpodoxime, respectively. When paired comparisons were made, the two tests were 88.7%, 80%, and 87% within 1 log2 dilution from each other for ceftriaxone, cefixime, and cefpodoxime, respectively. The within-2-log2 agreements were 99.1%, 98.3%, and 94.8% for ceftriaxone, cefixime, and cefpodoxime, respectively. Notwithstanding the good correlations and the within-2-log2 general agreement, the Etest results produced slightly lower MICs than the agar dilution results. In conclusion, we found that the Etest can be effectively used as an alternative to agar dilution testing to determine the susceptibility of N. gonorrhoeae to ceftriaxone, cefixime, and cefpodoxime, although we recommend further research into extremely resistant isolates. For isolates within the typical range of clinical MICs, reexamination of the Etest interpretation of susceptible and nonsusceptible categories would likely allow for successful transition from agar dilution to the Etest. PMID:24554750

  13. Serogroup identification of Neisseria meningitidis: comparison of an antiserum agar method with bacterial slide agglutination.

    PubMed Central

    Craven, D E; Frasch, C E; Robbins, J B; Feldman, H A

    1978-01-01

    A serum agar method for serogrouping Neisseria meningitidis is described and compared with conventional bacterial slide agglutination. There was 93% agreement for 300 strains examined individually by each method. Among strains from serogroups A, B, C, Y, and W135, there was 100% correlation, whereas strains from serogroup 29E (Z') had only 67% correlation. The serum agar method was rapid, as well as easy to perform and interpret. The potential benefits of this method for epidemiological studies and reference laboratories processing large numbers of meningococcal isolates are emphasized. Images PMID:96123

  14. Casein Agar: a Useful Medium for Differentiating Candida dubliniensis from Candida albicans

    PubMed Central

    Mosca, Christian O.; Moragues, María D.; Llovo, José; Al Mosaid, Asmaa; Coleman, David C.; Pontón, José

    2003-01-01

    Production of chlamydospores on casein agar at 24°C for 48 h provides a simple means for differentiating Candida dubliniensis from Candida albicans based on chlamydospore production. Of 109 C. dubliniensis isolates tested on this medium, 106 (97.2%) produced abundant chlamydospores and three produced few chlamydospores. In contrast, of the 120 C. albicans isolates tested, 111 (92.5%) failed to produce any chlamydospores, whereas the remaining nine isolates produced few chlamydospores. These findings indicate that abundant chlamydospore production on casein agar is a useful test for discriminating between C. dubliniensis and C. albicans. PMID:12624062

  15. Antibacterial Activity of Copaiba Oil Gel on Dental Biofilm

    PubMed Central

    Simões, Cláudia A.C.G.; Conde, Nikeila C. de Oliveira; Venâncio, Gisely N.; Milério, Patrícia S.L.L.; Bandeira, Maria F.C.L.; da Veiga Júnior, Valdir F.

    2016-01-01

    Amazonian biodiversity products that have been used for years in folk medicine, have emerged as feasible and promising alternatives for the inhibition of microorganisms in dental biofilm. Copaiba oil, a phytotherapic agent widely used by the Amazonian populations, is known for its antibacterial, anti-inflammatory, anesthetic, healing and antitumor medicinal properties. Objective: The aim of this study was to evaluate the in vitro antibacterial activity of copaiba oil (Copaifera multijuga) gel against strains of Streptococcus sp present in dental biofilm. Materials and Methods: The copaiba oil was obtained and the chemical components were identified. The oil emulsions were formulated and used with the Brain Heart Infusion agar diffusion method with strains of Streptococcus mitis, Streptococcus constellatus and Streptococcus salivarius isolated from patients as well as standard strains of S. mitis (ATCC903), S. mutans (ATCC10449), S. sanguinis (ATCC15300) and S. oralis (ATCC10557). The study groups were as follows: experimental copaiba oil gel, 1% chlorhexidine gel (positive control) and base gel (negative control). The seeded plates were incubated at 37ºC for 12, 24 and 48 hours, respectively. The results obtained were analyzed by Shapiro-Wilk and Friedman Tests (p<0.05) for non parametric data and the Tukey test was used for pH values with 5% level of significance. Results: The experimental copaiba oil gel and 1% chlorhexidine gel showed antibacterial activity against the tested microorganisms. Conclusion: The copaiba oil gel demonstrated antibacterial activity against all the strains of Streptococcus sp tested, suggesting that it can be used for dental biofilm control. PMID:27386004

  16. Precipitation Climate Data Records

    NASA Astrophysics Data System (ADS)

    Nelson, B. R.; Prat, O.; Vasquez, L.

    2015-12-01

    Five precipitation CDRs are now or soon will be transitioned to NOAA's CDR program. These include the PERSIANN data set, which is a 30-year record of daily adjusted global precipitation based on retrievals from satellite microwave data using artificial neural networks. The AMSU-A/B/Hydrobundle is an 11-year record of precipitable water, cloud water, ice water, and other variables. CMORPH (the NOAA Climate Prediction Center Morphing Technique) is a 17-year record of daily and sub-daily adjusted global precipitation measured from passive microwave and infrared data at high spatial and temporal resolution. GPCP (the Global Precipitation Climatology Project) is an approximately 30-year record of monthly and pentad adjusted global precipitation and a 17-year record of daily adjusted global precipitation. The NEXRAD Reanalysis is a 10-year record of high resolution NEXRAD radar based adjusted CONUS-wide hourly and daily precipitation. This study provides an assessment of the existing and transitioned long term precipitation CDRs and includes the verification of the five precipitation CDRs using various methods including comparison with in-situ data sets and trend analysis. As all of the precipitation related CDRs are transitioned, long term analyses can be performed. Comparisons at varying scales (hourly, daily and longer) of the precipitation CDRs with in-situ data sets are provided as well as a first look at what could be an ensemble long term precipitation data record.

  17. Viscoelasticity of silica gels

    SciTech Connect

    Scherer, G.W.

    1995-12-01

    The response of silica gels to mechanical loads depends on the properties of the solid phase and the permeability of the network. Understanding this behavior is essential for modeling of stresses developed during drying or heating of gels. The permeability and the mechanical properties are readily determined from a simple beam-bending experiment, by measuring the load relaxation that occurs at constant deflection. Load decay results from movement of the liquid within the network; in addition, there may be viscoelastic relaxation of the network itself. Silica gel is viscoelastic in chemically aggressive media, but in inert liquids (such as ethanol or acetone) it is elastic. Experiments show that the viscoelastic relaxation time decreases as the concentration and pH of the water in the pore liquid increase. During drying, the permeability decreases and the viscosity increases, both exhibiting a power-law dependence on density of the gel network.

  18. Testosterone Nasal Gel

    MedlinePlus

    ... enough natural testosterone). Testosterone nasal gel is used only for men with low testosterone levels caused by ... is a controlled substance. Prescriptions may be refilled only a limited number of times; ask your pharmacist ...

  19. Microfluidics with Gel Emulsions

    NASA Astrophysics Data System (ADS)

    Priest, Craig; Surenjav, Enkhtuul; Herminghaus, Stephan; Seemann, Ralf

    2006-03-01

    Microfluidic processing is usually achieved using single phase liquids. Instead, we use monodisperse emulsions to compartment liquids within microchannel geometries. At low continuous phase volume fractions, droplets self-organize to form well-defined arrangements, analogous to foam. While it is well-known that confined geometries can induce rearrangement of foam compartments at the millimeter-scale, similar dynamics are also expected for gel emulsions. We have studied online generation, organization and manipulation of gel emulsions using a variety of microchannel geometries. ``Passive'' reorganization, based on fixed channel geometries, can be supplemented by ``active'' manipulation by incorporating a ferrofluid phase. A ferromagnetic phase facilitates reorganization of liquid compartments on demand using an electromagnetic trigger. Moreover, coalescence between adjacent compartments within a gel emulsion can be induced using electrical potential. Microfluidics using gel emulsions will be well-suited for combinatorial chemistry, DNA sequencing, drug screening and protein crystallizations.

  20. Preparation of chitosan gel

    NASA Astrophysics Data System (ADS)

    Moussaoui, Y.; Mnasri, N.; Elaloui, E.; Ben Salem, R.; Lagerge, S.; de Menorval, L. C.

    2012-06-01

    Aerogel conditioning of the chitosan makes it possible to prepare porous solids of significant specific surface. The increase in the chitosan concentration or the degree of acetylation decreases the specific surface of the synthesized chitosan gel. Whereas drying with supercritical CO2 more effectively makes it possible to preserve the volume of the spheres of gel and to have a more significant specific surface in comparison with evaporative drying.

  1. Crystallization from Gels

    NASA Astrophysics Data System (ADS)

    Narayana Kalkura, S.; Natarajan, Subramanian

    Among the various crystallization techniques, crystallization in gels has found wide applications in the fields of biomineralization and macromolecular crystallization in addition to crystallizing materials having nonlinear optical, ferroelectric, ferromagnetic, and other properties. Furthermore, by using this method it is possible to grow single crystals with very high perfection that are difficult to grow by other techniques. The gel method of crystallization provides an ideal technique to study crystal deposition diseases, which could lead to better understanding of their etiology. This chapter focuses on crystallization in gels of compounds that are responsible for crystal deposition diseases. The introduction is followed by a description of the various gels used, the mechanism of gelling, and the fascinating phenomenon of Liesegang ring formation, along with various gel growth techniques. The importance and scope of study on crystal deposition diseases and the need for crystal growth experiments using gel media are stressed. The various crystal deposition diseases, viz. (1) urolithiasis, (2) gout or arthritis, (3) cholelithiasis and atherosclerosis, and (4) pancreatitis and details regarding the constituents of the crystal deposits responsible for the pathological mineralization are discussed. Brief accounts of the theories of the formation of urinary stones and gallstones and the role of trace elements in urinary stone formation are also given. The crystallization in gels of (1) the urinary stone constituents, viz. calcium oxalate, calcium phosphates, uric acid, cystine, etc., (2) the constituents of the gallstones, viz. cholesterol, calcium carbonate, etc., (3) the major constituent of the pancreatic calculi, viz., calcium carbonate, and (4) cholic acid, a steroidal hormone are presented. The effect of various organic and inorganic ions, trace elements, and extracts from cereals, herbs, and fruits on the crystallization of major urinary stone and gallstone

  2. Conformance Improvement Using Gels

    SciTech Connect

    Seright, Randall S.; Schrader, Richard; II Hagstrom, John; Wang, Ying; Al-Dahfeeri, Abdullah; Gary, Raven; Marin; Amaury; Lindquist, Brent

    2002-09-26

    This research project had two objectives. The first objective was to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective was to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil.

  3. Thin agar film for enhanced fungal growth and microscopic viewing in a new sealable fungal culture case.

    PubMed

    Hill, D R

    1996-09-01

    This project was undertaken to find ways to enhance fungus colony maturation, to make viewing of fungal cultures easier, and to reduce disruption of the fungal structures to be observed for identification. Accordingly, a technique using a thin (0.2-mm) agar film that avoids problems inherent in traditional methods of fungal culture and identification was developed. In addition, to accommodate the 0.2-mm layer of agar film and a contiguous thicker 4-mm section of agar, a sealable fungal culture case that fits within microscope stage calipers and under the objective lenses was invented. The growth and identification of 28 organisms were evaluated in the sealable fungal culture cases and on double-pour agar plates by using potato dextrose agar in both. Compared with results obtained with the double-pour agar plates (rated as "good"), fungal growth and identification with the sealable fungal culture case were superior (rated as "excellent") (P < 0.05, chi-square test). The thin agar film limits excessive mycelial growth, while it often promotes complete sporulation or other forms of maturation of the fungal colony. More importantly, the thin agar film allows direct microscopic viewing of the developing fungal colonies. The portion of the sealable fungal culture case with the 4-mm layer of agar can be used for evaluation of colony pigment and texture. In conclusion, this new sealable fungal culture case allows direct viewing and earlier fungal species identification with greater intrinsic safety. PMID:8862573

  4. Polyacrylamide gel electrophoresis.

    PubMed

    Chrambach, A; Rodbard, D

    1971-04-30

    Polyacrylamide gel electrophoresis (PAGE) provides a versatile, gentle, high resolution method for fractionation and physical-chemical characterization of molecules on the basis of size, conformation, and net charge. The polymerization reaction can be rigorously controlled to provide uniform gels of reproducible, measurable pore size over a wide range. This makes it possible to obtain reproducible relative mobility (Rf) values as physical-chemical constants. Application and extension of Ogston's (random fiber) model for a gel allows for calculation of molecular volume, surface area, or radius, free mobility, and valence from RJ measurements at several gel concentrations, to calculate gel concentration for optimal resolution, and to predict behavior of macromolecules on gel gradients by computerized methods. Extension of classical moving boundary theory has been used to generate multiphasic buffer systems (providing selective stacking, unstacking, restacking, and preparative steady-state-stacking) with known operating characteristics for any pH at 0 degrees and 25 degrees C. A general strategy for isolation of macromolecules and for macromolecular mapping has been developed. Preparative scale PAGE is operational for milligram loads and feasible for gram quantities. PMID:4927678

  5. Radiokinetic study on nucleation process of 65Zn(OH)2, 65Zn3(PO4)2 and 51CrPO4 crystals in gelatin and agar

    NASA Astrophysics Data System (ADS)

    Cecal, Al; Palamaru, M.; Chisca, S.; Balan, A.

    1999-01-01

    The nucleation process of 65Zn(OH)2, 65Zn3(PO4)2, and 51CrPO4 crystals in gelatin and agar was studied by using radioactive tracers. The diffusion rate, constants for 65Zn2+ and 51Cr3+ cations through gel, and the reaction rate constants of nucleation process as well as the beginning time of crystal appearance were established. It was found that the reaction rate constant of the low-soluble crystal is higher, and consequently, in a given colloidal medium this parameter varies as follows: k * Zn(PO4)2> k * Zn(OH) 2> k * CrPO 4

  6. Radiokinetic study on nucleation process of 65Zn(OH)2, 65Zn3(PO4)2 and 51CrPO4 crystals in gelatin and agar

    NASA Astrophysics Data System (ADS)

    Cecal, Al; Palamaru, M.; Chisca, S.; Balan, A.

    1999-01-01

    The nucleation process of 65Zn(OH)2, 65Zn3(PO4)2, and 51CrPO4 crystals in gelatin and agar was studied by using radioactive tracers. The diffusion rate, constants for 65Zn2+ and 51Cr3+ cations through gel, and the reaction rate constants of nucleation process as well as the beginning time of crystal appearance were established. It was found that the reaction rate constant of the low-soluble crystal is higher, and consequently, in a given colloidal medium this parameter varies as follows: k * Zn(PO4)2>k * Zn(OH) 2>k * CrPO 4

  7. Applying Agar's Concept of "Languaculture" to Explain Asian Students' Experiences in the Australian Tertiary Context

    ERIC Educational Resources Information Center

    Norris, Lindy; Tsedendamba, Nara

    2015-01-01

    This paper reports part of a broader qualitative case study of Asian students "translation" (Agar, 2006) to study in an Australian university. The paper is concerned with the experiences of eight participants and their involvement in a training programme in the use of language learning strategies (LLS) to support their engagement with…

  8. Development of hyperspectral imaging technique for salmonella enteritidis and typhimurium on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Salmonella is a common cause of foodborne disease resulting from the consumption of contaminated food products. Although a direct plating method is widely used for presumptive positive screening of pathogenic Salmonella colonies on agar plates, it is labor-intensive, time-consuming and also prone to...

  9. THE MICROGARDENING COOKBOOK, DIRECTIONS FOR PREPARING DISHES AND TUBES OF STERILE NUTRIENT AGAR.

    ERIC Educational Resources Information Center

    CHANDLER, MARION N.

    THIS BOOKLET WAS PREPARED FOR TEACHER USE IN ASSOCIATION WITH THE ELEMENTARY SCIENCE STUDY UNIT "MICROGARDENING." IT CONTAINS DIRECTIONS FOR PREPARING CULTURE DISHES AND TUBES OF NUTRIENT STERILE AGAR FOR FUNGAL AND/OR BACTERIAL GROWTH. IT INCLUDES (1) LISTS OF NEEDED SUPPLIES AND EQUIPMENT, (2) DIRECTIONS FOR THE PREPARATION AND STERILIZATION OF…

  10. Comparison of the antibacterial activity of chelating agents using the agar diffusion method

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of 2 metal chelators. Concentrations of 0 to 40 mM of ethylenediaminetetraacetic acid (EDTA) and ethylenediamine-N,N’-disuccinic acid (EDDS) were prepared in 1.0 M potassium hydroxide (KOH). The pH of the solutions was adjusted to 1...

  11. Mercury in fruiting bodies of Fly Agaric Amanita muscaria (L.: Fr.) Pers. collected from Poland

    NASA Astrophysics Data System (ADS)

    Falandysz, J.; Lipka, K.

    2003-05-01

    Total mercury concentrations were determined in the fruiting bodies of Fly Agaric Amanita muscaria (L.: FL) Pers. and underlying soil substrate collected from several sites in Poland in 1993-2000 to evaluate mercury status as contaminant and bioindicating features of this species. The samples were collected from the spatially distant sites such as: Zaborski Landscape Park, Mierzeja Wiślana Landscape Park, Wdzydzki Landscape Park, Borecka Forest, Tucholskie Forest, Wieluńska Upland, the communities of Gubin, Manowo, Lubiana and Morag. Total mercury content of caps and stalks of Fly agaric varied widely depending on the sites examined. The range of the mean mercury concentrations for all 17 sites was between 96±10 and 1900±1400 ng/g dry wt for the caps and between 6l±32 and 920±760 ng/g dry wt for the stalks, while between 4.4±3.1 and 150±20 ng/g were noted for soil substrate samples from 9 sites examined. Fly agaric independently of the site examined showed relatively good capacity to accumulate total mercury and BCF values varied between 16±10 and 74±15 for the caps and between 11±8 and 42±10 for the stalks. Nevertheless, relatively high bioconcentration potential of mercury by Fly agaric seems to be specific for that species and under soil mercury concentrations noted no bioindication properties of this mushroom could be observed.

  12. Seasonal variation in the biomass and agar yield from Gracilaria cervicornis and Hydropuntia cornea from Brazil.

    PubMed

    Marinho-Soriano, E; Silva, T S; Moreira, W S

    2001-04-01

    Seasonality of biomass and agar yield from two agarophytes (G. cervicornis and H. cornea) was determined. The biomass from G. cervicornis was higher (390 g m-2) during the dry season and lower during the rainy season (129 g m-2). The data analysis for G. cervicornis revealed a significant seasonal variation (P < 0.05). H. cornea did not show a clear seasonal variation and was present only from March to August. The peak in biomass for this species was recorded in April (383 g m-2) and was significantly different from the other months (P < 0.05). The agar yield for G. cervicornis varied from 11% to 20%, with generally higher values recorded during the dry season. The agar yield showed a highly significant variation (P < 0.001). Agar yield from H. cornea ranged from 29% to 41%, with a peak recorded in June. The results above indicate that H. cornea can be considered a good candidate for commercial use. PMID:11272017

  13. Radiation survival of murine and human melanoma cells utilizing two assay systems: monolayer and soft agar.

    PubMed Central

    Yohem, K. H.; Slymen, D. J.; Bregman, M. D.; Meyskens, F. L.

    1988-01-01

    The radiation response of murine and human melanoma cells assayed in bilayer soft agar and monolayer was examined. Cells from the murine melanoma Cloudman S91 CCL 53.1 cell line and three human melanoma cell strains (C8146C, C8161, and R83-4) developed in our laboratory were irradiated by single dose X-rays and plated either in agar or on plastic. D0 values were the same within 95% confidence intervals for cells from the human melanoma cell strains C8146C, C8161, and R83-4 but were dissimilar for the murine cell line CCL 53.1 Dq values were different for all cells studied. The shape of the survival curve for all four melanomas was not identical for cells assayed in soft agar versus cells grown on plastic. This would indicate that apparent radiosensitivity was influenced by the method of assay although there were no apparent consistent differences between the curves generated by monolayer or bilayer soft agar assays. PMID:3348949

  14. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance sp...

  15. EFFECT OF IMPACT STRESS ON MICROBIAL RECOVERY ON AN AGAR SURFACE

    EPA Science Inventory

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. he relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving a...

  16. A Method for Cell Culture and Maintenance of Ammonia-Oxidizing Archaea in Agar Stab.

    PubMed

    Chu, Yeon-Jin; Lee, Jin-Young; Shin, So-Ra; Kim, Geun-Joong

    2015-12-01

    Ammonia oxidizing archaea (AOA) are predominantly found and closely linked with geochemical cycling of nitrogen in non-extreme habitats. However, these strains have mainly been investigated using liquid cultures of enriched cells. Here, we provide an agar stab as a simple and reliable means of cultivating and maintaining AOA. PMID:26543273

  17. Evolutionary consequences of putative intra- and interspecific hybridization in agaric fungi

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Agaric fungi of the southern Appalachians including the Great Smoky Mountains National Park are often heterozygous for the rDNA internal transcribed spacer region (ITS) with >42% of collections showing some level of heterozygosity for indels and/or base-pair substitutions. For these collections, int...

  18. Fishmeal extract bile salt lactose agar--a differential medium for enteric bacteria.

    PubMed

    Subbannayya, K; Udayalaxmi, J; Anugraha, M

    2006-08-01

    Fishmeal extract bile salt lactose agar (FEBLA), a new differential medium for enteric bacteria was developed and evaluated for its ability to grow and differentiate lactose fermenters (LF) from non-lactose fermenters (NLF) in comparison with MacConkeys agar. Performance of FEBLA was at par with the latter. On FEBLA medium, the contrast between LF and NLF colonies was pronounced and Klebsiella pneumoniae produced more mucoid colonies than on MacConkeys agar (Hi Media). Unlike MacConkeys agar, a 24 h culture of K. pneumoniae cells on FEBLA were longer and thicker with abundant capsular material around the bacilli. Escherichia coli produced long and thick cells but only after 48h. No change in cell morphology was evident with regard to Salmonella typhi, S. paratyphi A, Shigella flexneri, Pseudomonas aeruginosa, Proteus mirabilis, Proteus vulgaris, Citrobacter koseri and Acinetobacter baumannii. Performance of the medium was controlled using E. coli and S. flexneri. FEBLA is simple, cost effective and may be a suitable alternative in the preliminary identification of enteric bacteria. PMID:16924840

  19. Hyperspectral image reconstruction using RGB color for foodborne pathogen detection on agar plates

    NASA Astrophysics Data System (ADS)

    Yoon, Seung-Chul; Shin, Tae-Sung; Park, Bosoon; Lawrence, Kurt C.; Heitschmidt, Gerald W.

    2014-03-01

    This paper reports the latest development of a color vision technique for detecting colonies of foodborne pathogens grown on agar plates with a hyperspectral image classification model that was developed using full hyperspectral data. The hyperspectral classification model depended on reflectance spectra measured in the visible and near-infrared spectral range from 400 and 1,000 nm (473 narrow spectral bands). Multivariate regression methods were used to estimate and predict hyperspectral data from RGB color values. The six representative non-O157 Shiga-toxin producing Eschetichia coli (STEC) serogroups (O26, O45, O103, O111, O121, and O145) were grown on Rainbow agar plates. A line-scan pushbroom hyperspectral image sensor was used to scan 36 agar plates grown with pure STEC colonies at each plate. The 36 hyperspectral images of the agar plates were divided in half to create training and test sets. The mean Rsquared value for hyperspectral image estimation was about 0.98 in the spectral range between 400 and 700 nm for linear, quadratic and cubic polynomial regression models and the detection accuracy of the hyperspectral image classification model with the principal component analysis and k-nearest neighbors for the test set was up to 92% (99% with the original hyperspectral images). Thus, the results of the study suggested that color-based detection may be viable as a multispectral imaging solution without much loss of prediction accuracy compared to hyperspectral imaging.

  20. MODIFIED AGAR MEDIUM FOR DETECTING ENVIRONMENTAL SALMONELLAE BY THE MOST-PROBABLE-NUMBER METHOD

    EPA Science Inventory

    Salmonellae in the environment remain a potential source of disease. Low numbers of salmonellae have been detected and enumerated from environmental samples by most probable number methods that require careful colony selection from plated agar medium. A modified xylose lysine bri...

  1. Alternative plasticizers for the production of thermo-compressed agar films

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One percent agar (% wt) was dissolved in the deep eutectic solvent (DES), (2-hydroxyethyl) trimethylammonium chloride/urea at a 1:2 molar ratio, and successfully Electrospun into nanofibers. An existing electrospinning set-up, operated at 50 deg C, was adapted for use with an ethanol bath to collect...

  2. Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

    PubMed

    Falland-Cheung, Lisa; Piccione, Neil; Zhao, Tianqi; Lazarjan, Milad Soltanipour; Hanlin, Suzanne; Jermy, Mark; Waddell, J Neil

    2016-06-01

    Routine forensic research into in vitro skin/skull/brain ballistic blood backspatter behavior has traditionally used gelatin at a 1:10 Water:Powder (W:P) ratio by volume as a brain simulant. A limitation of gelatin is its high elasticity compared to brain tissue. Therefore this study investigated the use of dental alginate and agar impression materials as a brain simulant for ballistic testing. Fresh deer brain, alginate (W:P ratio 91.5:8.5) and agar (W:P ratio 81:19) specimens (n=10) (11×22×33mm) were placed in transparent Perspex boxes of the same internal dimensions prior to shooting with a 0.22inch caliber high velocity air gun. Quantitative analysis to establish kinetic energy loss, vertical displacement elastic behavior and qualitative analysis to establish elasticity behavior was done via high-speed camera footage (SA5, Photron, Japan) using Photron Fastcam Viewer software (Version 3.5.1, Photron, Japan) and visual observation. Damage mechanisms and behavior were qualitatively established by observation of the materials during and after shooting. The qualitative analysis found that of the two simulant materials tested, agar behaved more like brain in terms of damage and showed similar mechanical response to brain during the passage of the projectile, in terms of energy absorption and vertical velocity displacement. In conclusion agar showed a mechanical and subsequent damage response that was similar to brain compared to alginate. PMID:27131216

  3. Production of microbial medium from defatted brebra (Milletia ferruginea) seed flour to substitute commercial peptone agar

    PubMed Central

    Andualem, Berhanu; Gessesse, Amare

    2013-01-01

    Objective To investigate and optimize microbial media that substitute peptone agar using brebra seed defatted flour. Methods 'Defatted process, inoculums preparation, evaluation of bacterial growth, preparation of cooked and hydrolyzed media and growth turbidity of tested bacteria were determined. Results Two percent defatted flour was found to be suitable concentration for the growth of pathogenic bacteria: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (ATCC 27853), Salmonella (NCTC 8385) and Shigella flexneri (ATCC 12022) (S. flexneri), while 3% defatted flour was suitable for Staphylococcus aureus (ATCC 25923) (S. aureus). E. coli (93±1) and S. flexneri (524±1) colony count were significantly (P≤0.05) greater in defatted flour without supplement than in supplemented medium. E. coli [(3.72×109±2) CFU/mL], S. aureus [(7.4×109±2) CFU/mL], S. flexneri [(4.03×109±2) CFU/mL] and Salmonella [(2.37×109±1) CFU/mL] in non-hydrolyzed sample were statistically (P≤0.05) greater than hydrolyzed one and commercial peptone agar. Colony count of Salmonella [(4.55×109±3) CFU/mL], S. flexneri [(5.40×109±3) CFU/mL] and Lyesria moncytogenes (ATCC 19116) [(5.4×109±3) CFU/mL] on raw defatted flour agar was significantly (P≤0.05) greater than cooked defatted flour and commercial peptone agar. Biomass of E. coli, S. aureus, Salmonella and Enterococcus faecalis in non-hydrolyzed defatted flour is highly increased over hydrolyzed defatted flour and commercial peptone broth. Conclusions The defatted flour agar was found to be better microbial media or comparable with peptone agar. The substances in it can serve as sources of carbon, nitrogen, vitamins and minerals that are essential to support the growth of microorganisms without any supplements. Currently, all supplements of peptone agar are very expensive in the market. PMID:24075344

  4. Effect of impact stress on microbial recovery on an agar surface.

    PubMed

    Stewart, S L; Grinshpun, S A; Willeke, K; Terzieva, S; Ulevicius, V; Donnelly, J

    1995-04-01

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. The relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving agar slide impactor operating over a flow rate range from 3.8 to 40 liters/min yielding impaction velocities from 24 to 250 m/s. As a reference, the sixth stage of the Andersen Six-Stage Viable Particle Sizing Sampler was used at its operating flow rate of 28.3 liters/min (24 m/s). At a collection efficiency of close to 100% for the agar slide impactor, an increase in sampling flow rate and, therefore, in impaction velocity produced a significant decline in the percentage of microorganisms recovered. Conversely, when the collection efficiency was less than 100%, greater recovery and lower injury rates occurred. The highest relative rate of recovery (approximately 51% for P. fluorescens and approximately 62% for M. luteus) was obtained on the complete (Trypticase soy agar) medium at 40 and 24 m/s (6.4 and 3.8 liters/min), respectively. M. luteus demonstrated less damage than P. fluorescens, suggesting the hardy nature of the gram-positive strain versus that of the gram-negative microorganism. Comparison of results from the agar slide and Andersen impactors at the same sampling velocity showed that recovery and injury due to collection depends not only on the magnitude of the impaction velocity but also on the degree to which the microorganisms may be embedded in the collection medium.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7747946

  5. Effect of impact stress on microbial recovery on an agar surface.

    PubMed Central

    Stewart, S L; Grinshpun, S A; Willeke, K; Terzieva, S; Ulevicius, V; Donnelly, J

    1995-01-01

    Microbial stress due to the impaction of microorganisms onto an agar collection surface was studied experimentally. The relative recovery rates of aerosolized Pseudomonas fluorescens and Micrococcus luteus were determined as a function of the impaction velocity by using a moving agar slide impactor operating over a flow rate range from 3.8 to 40 liters/min yielding impaction velocities from 24 to 250 m/s. As a reference, the sixth stage of the Andersen Six-Stage Viable Particle Sizing Sampler was used at its operating flow rate of 28.3 liters/min (24 m/s). At a collection efficiency of close to 100% for the agar slide impactor, an increase in sampling flow rate and, therefore, in impaction velocity produced a significant decline in the percentage of microorganisms recovered. Conversely, when the collection efficiency was less than 100%, greater recovery and lower injury rates occurred. The highest relative rate of recovery (approximately 51% for P. fluorescens and approximately 62% for M. luteus) was obtained on the complete (Trypticase soy agar) medium at 40 and 24 m/s (6.4 and 3.8 liters/min), respectively. M. luteus demonstrated less damage than P. fluorescens, suggesting the hardy nature of the gram-positive strain versus that of the gram-negative microorganism. Comparison of results from the agar slide and Andersen impactors at the same sampling velocity showed that recovery and injury due to collection depends not only on the magnitude of the impaction velocity but also on the degree to which the microorganisms may be embedded in the collection medium.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7747946

  6. Use of Dehydrated Agar to Estimate Microbial Water Quality for Horticulture Irrigation.

    PubMed

    Meador, Dustin P; Fisher, Paul R; Guy, Charles L; Harmon, Philip F; Peres, Natalia A; Teplitski, Max

    2016-07-01

    Petrifilms are dehydrated agar culture plates that have been used to quantify colony forming units (CFU) mL of either aerobic bacteria (Petrifilm-AC) or fungus (Petrifilm-YM), depending on substrate composition. Microbes in irrigation systems can indicate biofilm risk and potential clogging of irrigation emitters. The research objective was to compare counts on Petrifilms versus traditional, hydrated-agar plates using samples collected from recirculated irrigation waters and cultures of isolated known species. The estimated count (in CFU mL) from a recirculated irrigation sample after 7 d of incubation on Petrifilm-YM was only 5.5% of the count quantified using sabouraud dextrose agar (SDA) with chloramphenicol after 14 d. In a separate experiment with a known species, Petrifilm-YM did not successfully culture zoospores of . Isolates of viable zoospores were cultured successfully on potato-dextrose agar (PDA), with comparable counts with a vegetable juice medium supplemented with the antibiotics pimaricin, ampicillin, rifamycin, pentochloronitrobenzene and hymexazol (PARP-H). The quantification of pv. Begoniaceae on Petrifilm-AC was not significantly different ( < 0.05) than on PDA, but was lower than on Reasoner and Goldrich agar (R2A) or with a hemocytometer. The current formulation of Petrifilm-YM is unlikely to be a useful monitoring method for plant pathogens in irrigation water because of the inability to successfully culture oomycetes. However, Petrifilm-AC was an effective method to quantify bacteria and can provide an easy-to-use on-farm tool to monitor biofilm risk and microbial density. PMID:27380096

  7. CONFORMANCE IMPROVEMENT USING GELS

    SciTech Connect

    Randall S. Seright

    2002-02-28

    This technical progress report describes work performed from June 20 through December 19, 2001, for the project, ''Conformance Improvement Using Gels''. Interest has increased in some new polymeric products that purport to substantially reduce permeability to water while causing minimum permeability reduction to oil. In view of this interest, we are currently studying BJ's Aqua Con. Results from six corefloods revealed that the Aqua Con gelant consistently reduced permeability to water more than that to oil. However, the magnitude of the disproportionate permeability reduction varied significantly for the various experiments. Thus, as with most materials tested to date, the issue of reproducibility and control of the disproportionate permeability remains to be resolved. Concern exists about the ability of gels to resist washout after placement in fractures. We examined whether a width constriction in the middle of a fracture would cause different gel washout behavior upstream versus downstream of the constriction. Tests were performed using a formed Cr(III)-acetate-HPAM gel in a 48-in.-long fracture with three sections of equal length, but with widths of 0.08-, 0.02-, and 0.08-in., respectively. The pressure gradients during gel extrusion (i.e., placement) were similar in the two 0.08-in.-wide fracture sections, even though they were separated by a 0.02-in.-wide fracture section. The constriction associated with the middle fracture section may have inhibited gel washout during the first pulse of brine injection after gel placement. However, during subsequent phases of brine injection, the constriction did not inhibit washout in the upstream fracture section any more than in the downstream section.

  8. Effect of heat treatment on the performance of tryptose-sulfite-cycloserine agar for enumeration of Clostridium perfringens.

    PubMed Central

    Brodsky, M H; Ciebin, B W

    1979-01-01

    Dissolving dehydrated tryptose-sulfite-cycloserine agar by only boiling or microwaving was found to inhibit Clostridium perfringens colony development in pour plates when compared with C. perfringens recovery in tryptose-sulfite-cycloserine agar prepared by autoclaving. Images PMID:225988

  9. Effect of lignin on water vapor barrier, mechanical, and structural properties of agar/lignin composite films.

    PubMed

    Shankar, Shiv; Reddy, Jeevan Prasad; Rhim, Jong-Whan

    2015-11-01

    Biodegradable composite films were prepared using two renewable resources based biopolymers, agar and lignin alkali. The lignin was used as a reinforcing material and agar as a biopolymer matrix. The effect of lignin concentration (1, 3, 5, and 10wt%) on the performance of the composite films was studied. In addition, the mechanical, water vapor barrier, UV light barrier properties, FE-SEM, and TGA of the films were analyzed. The agar/lignin films exhibited higher mechanical and UV barrier properties along with lower water vapor permeability compared to the neat agar film. The FTIR and SEM results showed the compatibility of lignin with agar polymer. The swelling ratio and moisture content of agar/lignin composite films were decreased with increase in lignin content. The thermostability and char content of agar/lignin composite films increased with increased lignin content. The results suggested that agar/lignin films have a potential to be used as a UV barrier food packaging material for maintaining food safety and extending the shelf-life of the packaged food. PMID:26271435

  10. Differentiating non-0157:H7 STEC serogroups from ground beef plated on agar media by hyperspetral imaging

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Introduction: The development of an assay to detect and confirm a positive non-O157:H7 isolate is challenging when mixed morphologically results are obtained from the serogroups growing on Rainbow agar. Rainbow agar is only claimed by the manufacturer to be very specific for E.coli O157:H7 strain...

  11. An abbreviated scheme for identification of Yersinia enterocolitica isolated from food enrichments on CIN (cefsulodin-irgasan-novobiocin) agar.

    PubMed

    Devenish, J A; Schiemann, D A

    1981-09-01

    An abbreviated procedure for the biochemical identification of Yersinia enterocolitica isolated from food enrichments on CIN (cefsulodin-irgasan-novobiocin) agar was investigated. A total of 170 colonies resembling Y. enterocolitica in colonial morphology and appearance on CIN agar were selected for identification using API strips. Ninety-three of these isolates were examined with the PathoTec ornithine decarboxylase, Voges-Proskauer, and urease test strips. The PathoTec urease strip alone was adequate for identification of all isolates of Y. enterocolitica. Christensen's urea agar was applied to the remaining 77 isolates and found less specific in the 1 isolate of Enterobacter agglomerans was urease positive along with 10 isolates of Y. enterocolitica. CIN agar is a highly specific medium for isolation of Y. enterocolitica, requiring only Kligler iron agar and urea slants for confirmation of presumptive colonies. PMID:7306881

  12. Mixing Zones and Mineral Precipitation Dynamics in Porous Media

    NASA Astrophysics Data System (ADS)

    Gebrehiwet, T.; Henrikson, J.; Guo, L.; Fox, D. T.; Huang, H.; Fujita, Y.; Tu, L.

    2011-12-01

    Precipitation of mineral phases in subsurface environments involves coupling between reactant transport and changes in media properties that control transport. Chemical gradients within mixing zones will determine the rates and products of reactions, which in turn can modify the permeability and flow paths within the porous media. This reaction-transport coupling is being studied using double diffusion experiments and reactive transport modeling, with calcium carbonate and calcium phosphate as the model mineral systems. In particular we are investigating: (1) the interplay between permeability modifications and reactions that can change local chemical conditions, hydrodynamic conditions, and therefore the rate of precipitation, (2) narrowing ("focusing") of the precipitation zone, and (3) migration of the precipitation zone associated with asymmetry across the mixing zone with respect to precipitation rates and/or local chemical conditions. Experiments are being conducted in hydrogel (polyacrylamide) and granular (glass beads and fine-grained sand) media. Gels were used to investigate the role of diffusion alone on the structure of precipitation zones. We observed differences between carbonate and phosphate systems with respect to the induction period for precipitation, and the position and migration of the precipitation zone. One interesting observation was that multiple precipitation bands are produced in the calcium phosphate system, while no clear banding has been observed in the calcium carbonate system. Initial reactive transport simulations that couple precipitation kinetics with reactant transport and mixing appear consistent with the experimental observations. Precipitation band width and position were found to change with time, and precipitation appeared to slow subsequent reactions at the mixing interfaces. The induction time, spacing between the precipitation bands and band width in the calcium phosphate system were influenced by pH, saturation state

  13. The Antibacterial Effects of Apacaries Gel on Streptococcus mutans: An in vitro Study

    PubMed Central

    Peerapattana, Jomjai; Ratanathongkam, Ariya; Nualkaew, Nartsajee; Chatchiwiwattana, Supaporn; Treesuwan, Panta

    2014-01-01

    ABSTRACT Background: New approaches for chemomechanical caries removal require effective materials with antibacterial properties for removal of infected dentin. Apacaries gel is a newly developed material comprised polyphenol from mangosteen extracts and papain mixed in gel preparation. Aim: This study evaluated the antibacterial effects of Apacaries gel on Streptococcus mutans in vitro. Materials and methods: Mangosteen pericarp powder was extracted. The amount of phenolic compounds was determined using the Folin-Ciocalteu method. The time-kill kinetics were investigated. Mangosteen extract and papain were mixed with gel base to develop Apacaries gel. The inhibition zone of the Apacaries gel was determined using agar well diffusion methods. Results: The mangosteen pericarp extract, which contains α-mangostin, was active against S. mutans strain ATCC25175. The time-kill kinetics curve showed that applying 1 mg/ml of mangosteen extract can reduce S. mutans by 50% within approximately 5 seconds; after this reduction, the bacterial count rapidly dropped to 0 within 60 seconds. Using mangosteen extract and papain mixture gel preparation resulted in a larger inhibition zone than using the mangosteen extract gel or papain gel separately. Conclusion: Apacaries gel can effectively inhibit S. mutans strain ATCC25175. Apacaries is capable of S. mutans inhibition better than both mangosteen extract or papain separately. How to cite this article: Juntavee A, Peerapattana J, Ratanathongkam A, Nualkaew N, Chatchiwiwattana S, Treesuwan P. The Antibacterial Effects of Apacaries Gel on Streptococcus mutans: An in vitro Study. Int J Clin Pediatr Dent 2014;7(2):77-81. PMID:25356004

  14. Voronoi diagrams generated by regressing edges of precipitation fronts.

    PubMed

    de Lacy Costello, Benjamin P J; Hantz, Peter; Ratcliffe, Norman M

    2004-02-01

    Reaction-diffusion systems where one of the reagents (outer electrolyte) penetrates into a gel by diffusion and forms a precipitate with the other reagent (inner electrolyte) homogenized in the gel, are able to produce various complex precipitation patterns. The previously studied NaOH + AgNO3 and recently discovered CuCl2 + K3[Fe(CN)6] processes, (where the first reagent is the outer electrolyte and the other is the inner electrolyte homogenized in the gel), when reacted using the above mentioned method, are able to generate tessellations of a plane by a mechanism dependant on the dynamics of so-called regressing edges of the reaction fronts. The spontaneous partitioning of the reacted phases results in the construction of a pattern analogous to a Voronoi diagram or one of their generalizations. PMID:15268381

  15. Swelling of Olympic Gels

    NASA Astrophysics Data System (ADS)

    Lang, M.; Fischer, J.; Werner, M.; Sommer, J.-U.

    2014-06-01

    The swelling equilibrium of Olympic gels, which are composed of entangled cyclic polymers, is studied by Monte Carlo simulations. In contrast to chemically cross-linked polymer networks, we observe that Olympic gels made of chains with a larger degree of polymerization, N, exhibit a smaller equilibrium swelling degree, Q∝N-0.28ϕ0-0.72, at the same polymer volume fraction ϕ0 at network preparation. This observation is explained by a desinterspersion (reorganization with release of nontrapped entanglements) process of overlapping nonconcatenated rings upon swelling.

  16. Gels composed of sodium-aluminum silicate, Lake Magadi, Kenya

    USGS Publications Warehouse

    Eugster, H.P.; Jones, B.F.

    1968-01-01

    Sodium-aluminum silicate gels are found in surftcial deposits as thick as 5 centimeters in the Magadi area of Kenya. Chemical data indicate they are formed by the interaction of hot alkaline springwaters (67?? to 82??C; pH, about 9) with alkali trachyte flows and their detritus, rather than by direct precipitation. In the process, Na2O is added from and silica is released to the saline waters of the springs. Algal mats protect the gels from erosion and act as thermal insulators. The gels are probably yearly accumulates that are washed into the lakes during floods. Crystallization of these gels in the laboratory yields analcite; this fact suggests that some analcite beds in lacustrine deposits may have formed from gels. Textural evidence indicates that cherts of rocks of the Pleistocene chert series in the Magadi area may have formed from soft sodium silicate gels. Similar gels may have acted as substrates for the accumulation and preservation of prebiological organic matter during the Precambrian.

  17. Gels composed of sodium-aluminium silicate, lake magadi, kenya.

    PubMed

    Eugster, H P; Jones, B F

    1968-07-12

    Sodium-aluminum silicate gels are found in surficial deposits as thick as 5 centimeters in the Magadi area of Kenya. Chemical data indicate they are formed by the interaction of hot alkaline springwaters (67 degrees to 82 degrees C; pH, about 9) with alkali trachyte flows and their detritus, rather than by direct precipitation. In the process, Na(2)O is added from and silica is released to the saline waters of the springs. Algal mats protect the gels from erosion and act as thermal insulators. The gels are probably yearly accumulates that are washed into the lakes during floods. Crystallization of these gels in the laboratory yields analcite; this fact suggests that some analcite beds in lacustrine deposits may have formed from gels. Textural evidence indicates that cherts of rocks of the Pleistocene chert series in the Magadi area may have formed from soft sodium silicate gels. Similar gels may have acted as substrates for the accumulation and preservation of prebiological organic matter during the Precambrian. PMID:17770594

  18. Enumeration of fecal Clostridium perfringens spores in egg yolk-free tryptose-sulfite-cycloserine agar.

    PubMed

    Hauschild, A H; Hilsheimer, R; Griffith, D W

    1974-03-01

    The Shahidi-Ferguson perfringens, tryptose-sulfite-cycloserine (TSC), and egg yolk-free TSC agars have been tested for their suitability to enumerate fecal spores of Clostridium perfringens. When these spores comprised at least 20% of the total anaerobe spores, equally accurate counts were obtained in the three media. With lower ratios of C. perfringens spores, the most accurate counts were obtained in egg yolk-free TSC agar. The median C. perfringens spore count of 60 normal fecal specimens was log 3.4/g. A nonmotile, sulfite- and nitrate-reducing Clostridium, not identifiable with any known clostridial species, was isolated from 14 out of 60 fecal specimans. It was not differentiated from C. perfringens in the nitrite motility test, but could be distinguished by its inability to liquefy gelatin. PMID:4363369

  19. Enumeration of Fecal Clostridium perfringens Spores in Egg Yolk-Free Tryptose-Sulfite-Cycloserine Agar

    PubMed Central

    Hauschild, A. H. W.; Hilsheimer, R.; Griffith, D. W.

    1974-01-01

    The Shahidi-Ferguson perfringens, tryptose-sulfite-cycloserine (TSC), and egg yolk-free TSC agars have been tested for their suitability to enumerate fecal spores of Clostridium perfringens. When these spores comprised at least 20% of the total anaerobe spores, equally accurate counts were obtained in the three media. With lower ratios of C. perfringens spores, the most accurate counts were obtained in egg yolk-free TSC agar. The median C. perfringens spore count of 60 normal fecal specimens was log 3.4/g. A nonmotile, sulfite- and nitrate-reducing Clostridium, not identifiable with any known clostridial species, was isolated from 14 out of 60 fecal specimans. It was not differentiated from C. perfringens in the nitrite motility test, but could be distinguished by its inability to liquefy gelatin. PMID:4363369

  20. Characterization of gelatin-agar based phase separated hydrogel, emulgel and bigel: a comparative study.

    PubMed

    Wakhet, Senggam; Singh, Vinay K; Sahoo, Saikat; Sagiri, Sai Sateesh; Kulanthaivel, Senthilguru; Bhattacharya, Mrinal K; Kumar, Naresh; Banerjee, Indranil; Pal, Kunal

    2015-02-01

    The current study describes the in-depth characterization of agar-gelatin based co-hydrogels, emulgels and bigels to have an insight about the differences in the properties of the formulations. Hydrogels have been extensively studied as vehicle for controlled drug release, whereas, the concept of emulgels and bigels is relatively new. The formulations were characterized by scanning electron microscopy, FTIR spectroscopy, XRD and mechanical properties. The biocompatibility and the ability of the formulations to be used as drug delivery vehicle were also studied. The scanning electron micrographs suggested the presence of internal phases within the agar-gelatin composite matrices of co-hydrogel, emulgel and bigel. FTIR and XRD studies suggested higher crystallinity of emulgels and bigels. Electrical impedance and mechanical stability of the emulgel and the bigel was higher than the hydrogel. The prepared formulations were found to be biocompatible and suitable for drug delivery applications. PMID:25672596

  1. Effect of Soybean Casein Digest Agar Lot on Number of Bacillus stearothermophilus Spores Recovered †

    PubMed Central

    Pflug, I. J.; Smith, Geraldine M.; Christensen, Ronald

    1981-01-01

    In recent years it has become increasingly apparent that Bacillus stearothermophilus spores are affected by various environmental factors that influence the performance of the spores as biological indicators. One environmental factor is the recovery medium. The effect of different lots of commercial soybean casein digest agar on the number of colony-forming units per plate was examined in two series of experiments: (i) several lots of medium from two manufacturers were compared in single experiments, and (ii) paired media experiments with four lots of medium were carried out and yielded three-point survivor curves. The results demonstrate that commercial soybean casein digest agar is variable on a lot-to-lot basis. The variation was lowest when recovering unheated or minimally heated spores and increased greatly with the severity of heating. PMID:16345822

  2. Effect of Soybean Casein Digest Agar Lot on Number of Bacillus stearothermophilus Spores Recovered.

    PubMed

    Pflug, I J; Smith, G M; Christensen, R

    1981-08-01

    In recent years it has become increasingly apparent that Bacillus stearothermophilus spores are affected by various environmental factors that influence the performance of the spores as biological indicators. One environmental factor is the recovery medium. The effect of different lots of commercial soybean casein digest agar on the number of colony-forming units per plate was examined in two series of experiments: (i) several lots of medium from two manufacturers were compared in single experiments, and (ii) paired media experiments with four lots of medium were carried out and yielded three-point survivor curves. The results demonstrate that commercial soybean casein digest agar is variable on a lot-to-lot basis. The variation was lowest when recovering unheated or minimally heated spores and increased greatly with the severity of heating. PMID:16345822

  3. Selective Precipitation of Proteins.

    PubMed

    Matulis, Daumantas

    2016-01-01

    Selective precipitation of proteins can be used as a bulk method to recover the majority of proteins from a crude lysate, as a selective method to fractionate a subset of proteins from a protein solution, or as a very specific method to recover a single protein of interest from a purification step. This unit describes a number of methods suitable for selective precipitation. In each of the protocols that are outlined, the physical or chemical basis of the precipitation process, the parameters that can be varied for optimization, and the basic steps for developing an optimized precipitation are described. PMID:26836410

  4. Global Precipitation Measurement

    NASA Technical Reports Server (NTRS)

    Hou, Arthur Y.; Skofronick-Jackson, Gail; Kummerow, Christian D.; Shepherd, James Marshall

    2008-01-01

    This chapter begins with a brief history and background of microwave precipitation sensors, with a discussion of the sensitivity of both passive and active instruments, to trace the evolution of satellite-based rainfall techniques from an era of inference to an era of physical measurement. Next, the highly successful Tropical Rainfall Measuring Mission will be described, followed by the goals and plans for the Global Precipitation Measurement (GPM) Mission and the status of precipitation retrieval algorithm development. The chapter concludes with a summary of the need for space-based precipitation measurement, current technological capabilities, near-term algorithm advancements and anticipated new sciences and societal benefits in the GPM era.

  5. Rheology of Active Gels

    NASA Astrophysics Data System (ADS)

    Chen, Daniel

    2015-03-01

    Active networks drive a diverse range of critical processes ranging from motility to division in living cells, yet a full picture of their rheological capabilities in non-cellular contexts is still emerging, e.g., How does the rheological response of a network capable of remodeling under internally-generated stresses differ from that of a passive biopolymer network? In order to address this and other basic questions, we have engineered an active gel composed of microtubules, bidirectional kinesin motors, and molecular depletant that self-organizes into a highly dynamic network of active bundles. The network continually remodels itself under ATP-tunable cycles of extension, buckling, fracturing, and self-healing. Using confocal rheometry we have simultaneously characterized the network's linear and non-linear rheological responses to shear deformation along with its dynamic morphology. We find several surprising and unique material properties for these active gels; most notably, rheological cloaking, the ability of the active gel to drive large-scale fluid mixing over several orders of flow magnitude while maintaining an invariant, solid-like rheological profile and spontaneous flow under confinement, the ability to exert micro-Newton forces to drive persistent directed motion of the rheometer tool. Taken together, these results and others to be discussed highlight the rich stress-structure-dynamics relationships in this class of biologically-derived active gels.

  6. The Resazurin-Agar Method - a Quick Test to Determine Water Quality

    NASA Astrophysics Data System (ADS)

    Huckfeldt, J.; Westphal, B.; Claußen, L.

    2015-12-01

    Rezasurin has been used as a smart tracer in stream ecosystems to indicate metabolic activity, specifically aerobic respiration by heterotrophic bacteria. Resazurin is a blue compound which is irreversibly reduced to the pink resorufin in the presence of aerobic bacteria. The degree and speed of colour change from blue to pink is a measure of the degree of oxygen consumption and thus an indirect indication of the concentration of aerobic bacteria in a given medium. A high concentration of bacteria in water indicates a bad water quality. In our work a method was developed using resazurin agar plates to find a quick and easy way for testing water quality and comparing concentrations of bacteria in freshwater and seawater samples. The theory was to concentrate bacteria from a defined volume of water sample onto polycarbonate filters (0.2 μm), which are then placed onto the resazurin agar plate. The presence of aerobic bacteria on the filter will reduce the resazurin in the agar and the compound changes its colour. First tests conducted with different dilutions of a pure culture of yoghurt bacteria showed promising results and confirmed the feasibility of the method. In a further assay, we used water samples from different water layers and different temperatures and were also able to observe differences in the concentration of bacteria, depending on these different environmental conditions.The assay was also successfully used with seawater samples, collected from 2 different stations at 3 different depths in the Baltic Sea (salinity=15). The discolouration of the plates showed good correlation with the oxygen concentrations in the water. The resazurin-agar plate method is economical and fast. Several samples could be investigated at the same time without sacrificing the reliability of the results. Thus it is a good pre-screening test for a quantitative evaluation of bacteria in a water sample.

  7. Cytotoxicity of ferrite particles by MTT and agar diffusion methods for hyperthermic application

    NASA Astrophysics Data System (ADS)

    Kim, Dong-Hyun; Lee, Se-Ho; Kim, Kyoung-Nam; Kim, Kwang-Mahn; Shim, In-Bo; Lee, Yong-Keun

    2005-05-01

    We investigated the cytotoxicity of the prepared various ferrites (Fe-, Li-, Ni/Zn/Cu-, Ba-, Sr-, Co-, Co/Ni-ferrites) using MTT assay as well as agar diffusion method. Their cytotoxicity was compared with that of alginate-encapsulated ferrites. In the MTT assay, Fe 3O 4 and SrFe 12O 19 ferrite showed the highest cell viability of 90%. Alginate-encapsulated Ba-ferrite was ranked mildly cytotoxic, whereas their ferrite particles were ranked cytotoxic.

  8. Disulfide-Functionalized Diblock Copolymer Worm Gels.

    PubMed

    Warren, Nicholas J; Rosselgong, Julien; Madsen, Jeppe; Armes, Steven P

    2015-08-10

    Two strategies for introducing disulfide groups at the outer surface of RAFT-synthesized poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) (PGMA-PHPMA, or Gx-Hy for brevity) diblock copolymer worms are investigated. The first approach involved statistical copolymerization of GMA with a small amount of disulfide dimethacrylate (DSDMA, or D) comonomer to afford a G54-D0.50 macromolecular chain transfer agent (macro-CTA); this synthesis was conducted in relatively dilute solution in order to ensure mainly intramolecular cyclization and hence the formation of linear chains. Alternatively, a new disulfide-based bifunctional RAFT agent (DSDB) was used to prepare a G45-S-S-G45 (or (G45-S)2) macro-CTA. A binary mixture of a non-functionalized G55 macro-CTA was utilized with each of these two disulfide-based macro-CTAs in turn for the RAFT aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). By targeting a PHPMA DP of 130 and systematically varying the molar ratio of the two macro-CTAs, a series of disulfide-functionalized diblock copolymer worm gels were obtained. For both formulations, oscillatory rheology studies confirmed that higher disulfide contents led to stronger gels, presumably as a result of inter-worm covalent bond formation via disulfide/thiol exchange. Using the DSDB-based macro-CTA led to the strongest worm gels, and this formulation also proved to be more effective in suppressing the thermosensitive behavior that is observed for the nondisulfide-functionalized control worm gel. However, macroscopic precipitation occurred when the proportion of DSDB-based macro-CTA was increased to 50 mol %, whereas the DSDMA-based macro-CTA could be utilized at up to 80 mol %. Finally, the worm gel modulus could be reduced to that of a nondisulfide-containing worm gel by reductive cleavage of the inter-worm disulfide bonds using excess tris(2-carboxyethyl)phosphine (TCEP) to yield thiol groups. These new biomimetic worm gels are

  9. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus

    PubMed Central

    Cold, Emma R.; Freyria, Nastasia J.; Martínez Martínez, Joaquín; Fernández Robledo, José A.

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham’s F12–5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham’s F12–5% FBS– 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham’s F12–5% FBS– 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications. PMID:27149378

  10. Alternative plasticizers for the production of thermo-compressed agar films.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Liu, LinShu; Gonçalves, Maria P

    2015-05-01

    Agar films were produced by thermo-compression using choline chloride (ChCl) as a plasticizer with urea. The three solid components were mixed together with the salt and urea (minor components) added to agar (main component) according to a fixed mass ratio of, respectively, 1.16:1:5. A central composite rotatable design (CCRD) with three parameters, 2(3), was used to evaluate the effects of temperature (X1; °C), time (X2; min) and applied load (X3; kN) of heat-pressing on the maximum tensile strength (TS) of the films (Y; MPa). Mixtures of urea and agar prepared at a mass ratio of 1:5 did not form homogeneous films suggesting the important plasticizing role of the salt. Heat-pressing the mixtures at more draconian conditions led to much darker and opaque films, with better mechanical resistance (higher values of TS). The most resistant film (∼ 15 MPa) was obtained at 140°C, 20 min and 176 kN. Selected films, including the optimal, showed similar water sorption profiles and close values of water vapor permeability (∼ 2.5-3.7 × 10(-9)gm(-1)s(-1)Pa(-1)). The fracture behavior and mechanical properties of the films were greatly affected by additional water plasticization when the films were stored at different conditions of relative humidity. PMID:25727746

  11. Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion–reaction based continuum model

    NASA Astrophysics Data System (ADS)

    Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

    2016-08-01

    Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion–reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm’s shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here.

  12. Susceptibility testing of Propionibacterium acnes comparing agar dilution with E test.

    PubMed Central

    Smith, M A; Alperstein, P; France, K; Vellozzi, E M; Isenberg, H D

    1996-01-01

    Propionibacterium acnes has been identified as a significant agent of nosocomial infections, including endophthalmitis. Data concerning susceptibility of P. acnes to newer beta-lactam antibiotics and fluoroquinolones are limited. Recent reports suggest that quinolones have activity against these organisms sufficient to warrant further study. We undertook a study to select appropriate antimicrobial agents for use in a rabbit model of P. acnes endophthalmitis. We compared the antibiotic susceptibilities of P. acnes by using the National Committee for Clinical Laboratory Standards method of agar dilution with the E test. Thirteen clinical isolates obtained from eye specimens and three American Type Culture Collection control strains were tested against 14 antibiotics. All the clinical isolates were susceptible by both methods to piperacillin, piperacillin-tazobactam, ampicillin-sulbactam, ticarcillin-clavulanate, cefotaxime, cefotetan, ceftriaxone, cefoxitin, and imipenem in addition to clindamycin but were resistant to metronidazole. The clinical P. acnes isolates also displayed high-level susceptibility to ciprofloxacin, sparfloxacin, and ofloxacin. Almost all the P. acnes strains demonstrated E-test MICs within 2 dilutions of the MICs observed by the agar dilution method. Those few strains for which discrepancies were noted exhibited E-test susceptibilities three- to fivefold dilutions lower than the agar dilution method susceptibilities but only with ampicillin-sulbactam, ticarcillin-clavulanate, and/or clindamycin. On the basis of our study, all of clinical eye isolates were susceptible to these newer antimicrobial agents and the two methods demonstrated similar susceptibility patterns. PMID:8815076

  13. Evaluation of cephamycins as supplements to selective agar for detecting Campylobacter spp. in chicken carcass rinses.

    PubMed

    Chon, Jung-Whan; Kim, Young-Ji; Kim, Hong-Seok; Kim, Dong-Hyeon; Kim, Hyunsook; Song, Kwang-Young; Sung, Kidon; Seo, Kun-Ho

    2016-04-16

    Although cefoperazone is the most commonly used antibiotic in Campylobacter-selective media, the distribution of cefoperazone-resistant bacteria such as extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli is increasing. Here we evaluated the potential of cephamycins for use as supplements to improve modified charcoal-cefoperazone-deoxycholate agar (mCCDA) by replacing cefoperazone with the same concentrations (32 mg/L) of cefotetan (modified charcoal-cefotetan-deoxycholate agar, mCCtDA) and cefoxitin (modified charcoal-cefoxitin-deoxycholate agar, mCCxDA). In chicken carcass rinse samples, the number of mCCDA plates detecting for Campylobacter (18/70, 26%) was significantly lower than that of mCCtDA (42/70, 60%) or mCCxDA plates (40/70, 57%). The number of mCCDA plates (70/70, 100%) that were contaminated with non-Campylobacter species was significantly higher than that of mCCtDA (20/70, 29%) or mCCxDA plates (21/70, 30%). The most common competing species identified using mCCDA was ESBL-producing E. coli, while Pseudomonas species frequently appeared on mCCtDA and mCCxDA. PMID:26915052

  14. Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion-reaction based continuum model.

    PubMed

    Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

    2016-01-01

    Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion-reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm's shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here. PMID:27434099

  15. Agar Plate Method for Detection and Enumeration of Alkylbenzenesulfonate-Degrading Microorganisms

    PubMed Central

    Ohwada, Kouichi

    1975-01-01

    A simple method for detection and enumeration of alkylbenzenesulfonate (ABS)-degrading microorganisms by using agar plates was developed and used in microbiological studies of coastal marine and polluted river waters. The method depends upon the color responses of neutral red in alkaline medium. Neutral red changes from pink, when it enters into ABS micelles, to yellow, when the ABS is degraded, and does not form micelles. When neutral red-tris(hydroxymethyl)-aminomethane buffer solution and then cationic surfactant solution were sprayed onto the agar surface of ABS-nutrient agar cultures, transparent haloes appeared around the colonies of ABS-degrading microorganisms against a pink background. Viable counts of ABS-degrading bacteria isolated from both seawater and freshwater environments were considerably higher in polluted waters than in less polluted areas. Viable counts of ABS-degrading bacteria averaged 1.5 × 105/ml in samples from the surface water of polluted Tokyo Bay and 3.0 × 104/ml in samples from the surface water of polluted Tamagawa River but were fewer in number in samples from less polluted waters. Images PMID:234155

  16. A supplemented soft agar chemotaxis assay demonstrates the Helicobacter pylori chemotactic response to zinc and nickel

    PubMed Central

    Sanders, Lisa; Andermann, Tessa M.

    2013-01-01

    Directed motility, or chemotaxis, is required for Helicobacter pylori to establish infection in the stomach, although the full repertoire of this bacterium’s chemotactic responses is not yet known. Here we report that H. pylori responds to zinc as an attractant and nickel as a repellent. To reach this conclusion, we employed both a temporal chemotaxis assay based on bacterial reversals and a supplemented soft agar spatial assay. We refined the temporal assay using a previously described chemorepellent, acid, and found that H. pylori requires rich media with serum to maintain optimal swimming motility. Surprisingly, we found that some strains respond to acid as an attractant, and that the TlpC chemoreceptor correlated with whether acid was sensed as an attractant or repellent. Using this same assay, we detected weak repellent responses to nickel and copper, and a varied response to zinc. We thus developed an alternative spatial chemotactic assay called the supplemented soft agar assay, which utilizes soft agar medium supplemented with the test compound. With Escherichia coli, the attractant serine slowed overall bacterial migration, while the repellent nickel increased the speed of overall migration. In H. pylori we detected slowed migration with doubled tryptone media, as well as zinc, consistent with an attractant response. In contrast, nickel increased migration, consistent with repulsion. PMID:23139399

  17. How do microorganisms influence trace element uptake by plants? Screening in an agar model rhizosphere.

    NASA Astrophysics Data System (ADS)

    Marchetti, M.; Robinson, B. H.; Evangelou, M. W. H.; Vachey, A.; Schwitzguebel, J. P.; Bernier-Latmani, R.; Schulin, R.

    2009-04-01

    Trace elements (TE) are essential for humans and plants, but they may be toxic if their concentration is too high. For this reason, the management of TE in soils is very important. In some cases it may be necessary to increase the uptake of nutrients or TE by plants, for example in a biofortification perspective. Conversely, in some other cases TE uptake by plants should be decreased, for instance to avoid heavy metals entering the food chain via edible crops. Microorganisms living in the rhizosphere affect trace element (TE) uptake by plants. However, due to the complexity of this space and the variety of microorganisms that occur there, it is difficult to isolate the effect of any particular strain. To overcome this hurdle, we developed a system in which we grew plants under sterile conditions in agar and inoculated their rhizosphere with a single, well-defined microbial strain. For many years, agar has been used as a growth substrate for microorganisms and plant tissues. It is cheap, easy to use, and can be autoclaved to ensure its sterility. Because of its widespread use, an experiment conducted using this substrate can be reproduced under the same conditions in any laboratory. In contrast to soil, there is little interaction between the trace elements and the agar matrix. There are many studies investigating the influence of microorganisms on TE uptake by plants. However, so far only a small variety of microorganisms has been tested on few plant species. Therefore, the first objective of our research was to develop a method to rapidly screen a large variety of microorganisms on various plant species. Once this goal was achieved, we sought to study the effect of single, well-defined microbial strains on TE uptake by sunflower and wheat. The substrate for plants growth was a 10% agar solution prepared with modified Hoagland's solution and a TE solution containing 1 mg/kg Pb and molar equivalents of Cu, Ni and Zn. The agar solution was autoclaved and poured into

  18. An Agar-Based Method for Plating Marine Protozoan Parasites of the Genus Perkinsus.

    PubMed

    Cold, Emma R; Freyria, Nastasia J; Martínez Martínez, Joaquín; Fernández Robledo, José A

    2016-01-01

    The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham's F12-5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham's F12-5% FBS- 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham's F12-5% FBS- 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications. PMID:27149378

  19. [The use of polymer gel dosimetry to measure dose distribution around metallic implants].

    PubMed

    Nagahata, Tomomasa; Yamaguchi, Hajime; Monzen, Hajime; Nishimura, Yasumasa

    2014-10-01

    A semi-solid polymer dosimetry system using agar was developed to measure the dose distribution close to metallic implants. Dosimetry of heterogeneous fields where electron density markedly varies is often problematic. This prompted us to develop a polymer gel dosimetry technique using agar to measure the dose distribution near substance boundaries. Varying the concentration of an oxygen scavenger (tetra-hydroxymethyl phosphonium chloride) showed the absorbed dose and transverse relaxation rate of the magnetic resonance signal to be linear between 3 and 12 Gy. Although a change in the dosimeter due to oxidization was observed in room air after 24 hours, no such effects were observed in the first 4 hours. The dose distribution around the metal implants was measured using agar dosimetry. The metals tested were a lead rod, a titanium hip joint, and a metallic stent. A maximum 30% dose increase was observed near the lead rod, but only a 3% increase in the absorbed dose was noted near the surface of the titanium hip joint and metallic stent. Semi-solid polymer dosimetry using agar thus appears to be a useful method for dosimetry around metallic substances. PMID:25327426

  20. Isolation of Clostridium difficile from faecal specimens--a comparison of chromID C. difficile agar and cycloserine-cefoxitin-fructose agar.

    PubMed

    Carson, Kerry C; Boseiwaqa, Lusiana V; Thean, Sara K; Foster, Niki F; Riley, Thomas V

    2013-09-01

    The culture of toxigenic Clostridium difficile from stool specimens is still seen as the gold standard for the laboratory diagnosis of C. difficile infection (CDI). bioMérieux have released ChromID Cdiff chromogenic agar (CDIF) for the isolation and identification of C. difficile in 24 h. In this study, we compared CDIF to pre-reduced cycloserine-cefoxitin-fructose agar with sodium taurocholate (TCCFA) in the examination of glutamate dehydrogenase-positive faecal specimens that were either GeneOhm positive or negative, using direct culture or culture following alcohol shock. Direct culture on CDIF had a sensitivity of 100 % and recovery of 94 % while for TCCFA these were 87 % and 82 %, respectively. For GeneOhm-positive alcohol-shocked faecal samples, sensitivity and recovery on CDIF was similar to direct culture while on TCCFA they were about 10 % higher. For direct culture, there was a significant difference between growth on CDIF at 24 h and TCCFA at 48 h (P = 0.001) and between the two media at 48 h (P<0.001). A total of 142 strains of C. difficile were recovered in pure culture from all GeneOhm-positive samples used in this study and 11 (7.7 %) of these were A(-)B(-)CDT(-) and may represent mixed infections of toxigenic and non-toxigenic C. difficile. The most dominant ribotype was UK 014 (14.7 %) followed by 002 (11.9 %) and 020 (11.9 %), and 36 % of toxigenic isolates, including an A(-)B(+)CDT(-) strain, could not be assigned a UK ribotype. CDIF outperformed pre-reduced TCCFA by negating the need for alcohol shock treatment and by giving a time saving of 24 h in the isolation of C. difficile. CDIF plates were also more selective than TCCFA and C. difficile colonies were easy to identify and subculture prior to strain typing. PMID:23579394

  1. AgarTrap-mediated genetic transformation using intact gemmae/gemmalings of the liverwort Marchantia polymorpha L.

    PubMed

    Tsuboyama-Tanaka, Shoko; Kodama, Yutaka

    2015-03-01

    The dioecious liverwort, Marchantia polymorpha L., is an emerging model plant. Various molecular biological techniques have been optimized for M. polymorpha for the past several years, and recently we reported a simplified Agrobacterium-mediated transformation method using sporelings (immature thalli from spores) of M. polymorpha. This method, termed AgarTrap (Agar-utilized Transformation with Pouring Solutions), completed by exchanging appropriate solutions on a single Petri dish to produce a sufficient number of independent transgenic sporelings. However, because spores are produced by crosses between males and females, the genetic backgrounds of resulting transgenic sporelings are not uniform. To easily produce transgenic liverworts with a uniform genetic background using AgarTrap, we developed an AgarTrap-mediated transformation method using intact gemmae/gemmalings produced by asexual reproduction. Using AgarTrap with male and female gemmae/gemmalings produced a sufficient number of independent transgenic gemmalings with uniform genetic backgrounds. The optimized transformation efficiencies were approximately 30 and 50 % in males and females, respectively. As with AgarTrap using sporelings, AgarTrap using intact gemmae/gemmalings will be useful in promoting studies of the molecular biology of M. polymorpha. PMID:25663453

  2. Agar disk elution method for susceptibility testing of Mycobacterium marinum and Mycobacterium fortuitum complex to sulfonamides and antibiotics.

    PubMed Central

    Stone, M S; Wallace, R J; Swenson, J M; Thornsberry, C; Christensen, L A

    1983-01-01

    An agar disk elution method using round well plates, supplemented Mueller-Hinton agar, and commercial drug disks is described for susceptibility testing of Mycobacterium marinum and the rapidly growing mycobacteria to antibiotics and sulfonamides. By this method, 14 of 14 strains of M. marinum were susceptible to rifampin, doxycycline, minocycline, and trimethoprim-sulfamethoxazole. Identical results were obtained with Middlebrook 7H10 agar and drugs prepared from standard powders. With 58 isolates of Mycobacterium fortuitum and Mycobacterium chelonei, this method had a 92% correlation with broth minimal inhibitory concentration determinations for cefoxitin and greater than 98% for doxycycline, kanamycin, amikacin, and the sulfonamides. Sixty-nine percent of isolates of M. chelonei susceptible to amikacin on supplemented Mueller-Hinton agar were resistant on 7H10 agar, and 15 of 16 M. chelonei isolates susceptible to erythromycin in broth were resistant by disk elution when an endpoint of no growth was used with either agar. The agar disk elution method offers a practical method for testing of most antibacterial agents against these mycobacterial species. Images PMID:6651277

  3. Further characterization of filarial antigens by SDS polyacrylamide gel electrophoresis

    PubMed Central

    Dissanayake, S.; Galahitiyawa, S. C.; Ismail, M. M.

    1983-01-01

    SDS (sodium dodecyl sulfate)-polyacrylamide gel electrophoresis of an antigen isolated from sera of Wuchereria bancrofti-infected patients and Setaria digitata antigen SD2-4 is reported. Both antigens showed carbohydrate (glycoprotein) staining. The W. bancrofti antigen had an apparent relative molecular mass of 35 000 while the S. digitata antigen SD2-4 migrated at the marker dye position on SDS-polyacrylamide gel electrophoresis. SDS treatment of these antigens did not abolish the precipitation reaction with antibody. In the case of W. bancrofti antigen, SDS treatment probably exposed hitherto hidden antigen epitopes. PMID:6354508

  4. Global Precipitation Measurement Poster

    NASA Technical Reports Server (NTRS)

    Azarbarzin, Art

    2010-01-01

    This poster presents an overview of the Global Precipitation Measurement (GPM) constellation of satellites which are designed to measure the Earth's precipitation. It includes the schedule of launches for the various satellites in the constellation, and the coverage of the constellation, It also reviews the mission capabilities, and the mission science objectives.

  5. PRECIPITATION OF PROTACTINIUM

    DOEpatents

    Moore, R.L.

    1958-07-15

    An lmprovement in the separation of protactinium from aqueous nitric acid solutions is described. 1t covers the use of lead dioxide and tin dioxide as carrier precipitates for the protactinium. In carrying out the process, divalent lead or divalent tin is addcd to the solution and oxidized, causing formation of a carrier precipitate of lead dioxide or stannic oxide, respectively.

  6. The Thorbex precipitation experiment

    NASA Astrophysics Data System (ADS)

    Nína Petersen, Guðrún; Ágústsson, Hálfdán; Ólafsson, Haraldur; Arason, Þórður

    2016-04-01

    During the autumn of 2014, precipitation was observed by a dense network of automatic raingauges covering a 243 m high and steep mountain, Þorbjörn, in the Reykjanes peninsula in SW-Iceland. The experiment is backed by continuous radar observations of winds and precipitation, radiosondes every 12 hours at the nearby Keflavik airport and a number of automatic weather stations. Some of the key results are: -The observations indicate that the average maximum rain over or close to the mountain maybe ~1.7 times the background rain. -Although the precipitation is only liquid, there seems to be great observation errors, likely due to strong winds. This calls for revision of the climatology of precipitation in Iceland and in other windy places. -The maximum wind loss and the spatial variability are of a similar magnitude. This complicates mapping of true precipitation.

  7. Precipitation and floodiness

    NASA Astrophysics Data System (ADS)

    Stephens, E.; Day, J. J.; Pappenberger, F.; Cloke, H.

    2015-12-01

    There are a number of factors that lead to nonlinearity between precipitation anomalies and flood hazard; this nonlinearity is a pertinent issue for applications that use a precipitation forecast as a proxy for imminent flood hazard. We assessed the degree of this nonlinearity for the first time using a recently developed global-scale hydrological model driven by the ERA-Interim/Land precipitation reanalysis (1980-2010). We introduced new indices to assess large-scale flood hazard, or floodiness, and quantified the link between monthly precipitation, river discharge, and floodiness anomalies at the global and regional scales. The results show that monthly floodiness is not well correlated with precipitation, therefore demonstrating the value of hydrometeorological systems for providing floodiness forecasts for decision-makers. A method is described for forecasting floodiness using the Global Flood Awareness System, building a climatology of regional floodiness from which to forecast floodiness anomalies out to 2 weeks.

  8. Comparative evaluation of chromogenic agar medium and conventional culture system for isolation and presumptive identification of uropathogens

    PubMed Central

    Akter, Laila; Haque, Rezwana; Salam, Md. Abdus

    2014-01-01

    Objective: Urine is the most frequent specimen received for culture/sensitivity by clinical laboratories. The microbiological performance of HiCrome UTI agar medium was compared with Blood agar and MacConkey agar for isolation and presumptive identification of bacteria from urine culture. Methods: A total of 443 consecutively collected midstream and/or catheter-catch urine samples from patients attending the Islami Bank Medical College Hospital, Rajshahi, Bangladesh during January to December, 2012 were cultured. Urine samples showing pus cells ≥ 5/HPF were inoculated on to Blood agar (BA), MacConkey agar (MAC) and HiCrome UTI agar (CA) media simultaneously and incubated overnight aerobically at 370C. Rate of isolation and presumptive identification of bacterial species were compared for different media. Results: Culture yielded a total of 199 bacterial isolates from 189 (42.67%) positive plates including 179 (40.40%) unimicrobial and 10 (2.26%) polymicrobial (mixed growth of pair of bacteria) growths. Both HiCrome UTI agar and Blood agar media supported 100% growths while 151 (75.88%) growths were observed on MacConkey agar. The rate of presumptive identification was found significantly higher on HiCrome UTI agar (97.49%) than MAC agar (67.34%) (P<0.001) as primary urine culture medium. Of 199 isolates, E. coli was found to be the leading uropathogen isolated from 118 (59.30%) samples with its presumptive identification rate of 95.76%, 93.22% and 5.93% on CA, MAC and BA respectively. All 10 (100%) polymicrobial growths were demonstrated distinctly on CA against only 01(10%) on each BA and MAC. Conclusion: HiCrome UTI agar was found to be more useful as primary urine culture medium in both higher rate of isolation and presumptive identification of uropathogens in comparison to conventional media. Its inherent characteristics in demonstrating polymicrobial growth and ease of rapid identification by distinct colony colour are unique. PMID:25225521

  9. How do microorganisms influence trace element uptake by plants? Screening in an agar model rhizosphere.

    NASA Astrophysics Data System (ADS)

    Marchetti, M.; Robinson, B. H.; Evangelou, M. W. H.; Vachey, A.; Schwitzguebel, J. P.; Bernier-Latmani, R.; Schulin, R.

    2009-04-01

    Trace elements (TE) are essential for humans and plants, but they may be toxic if their concentration is too high. For this reason, the management of TE in soils is very important. In some cases it may be necessary to increase the uptake of nutrients or TE by plants, for example in a biofortification perspective. Conversely, in some other cases TE uptake by plants should be decreased, for instance to avoid heavy metals entering the food chain via edible crops. Microorganisms living in the rhizosphere affect trace element (TE) uptake by plants. However, due to the complexity of this space and the variety of microorganisms that occur there, it is difficult to isolate the effect of any particular strain. To overcome this hurdle, we developed a system in which we grew plants under sterile conditions in agar and inoculated their rhizosphere with a single, well-defined microbial strain. For many years, agar has been used as a growth substrate for microorganisms and plant tissues. It is cheap, easy to use, and can be autoclaved to ensure its sterility. Because of its widespread use, an experiment conducted using this substrate can be reproduced under the same conditions in any laboratory. In contrast to soil, there is little interaction between the trace elements and the agar matrix. There are many studies investigating the influence of microorganisms on TE uptake by plants. However, so far only a small variety of microorganisms has been tested on few plant species. Therefore, the first objective of our research was to develop a method to rapidly screen a large variety of microorganisms on various plant species. Once this goal was achieved, we sought to study the effect of single, well-defined microbial strains on TE uptake by sunflower and wheat. The substrate for plants growth was a 10% agar solution prepared with modified Hoagland's solution and a TE solution containing 1 mg/kg Pb and molar equivalents of Cu, Ni and Zn. The agar solution was autoclaved and poured into

  10. In vivo comparison of cavity disinfection efficacy with APF gel, Propolis, Diode Laser, and 2% chlorhexidine in primary teeth

    PubMed Central

    Mohan, P. V. M. Uday; Uloopi, K. S.; Vinay, C.; Rao, R. Chandrasekhar

    2016-01-01

    Background: The survival of atraumatic restorative treatment (ART) restorations would be enhanced if near total elimination of cariogenic microorganisms could be done in the process of cavity cleaning before placing a restoration. Thus, use of disinfecting agents for achieving this goal could herald a new beginning in the field of contemporary dentistry. Aim: To assess and compare the cavity disinfection efficacy of APF gel, Brazilian Propolis, Diode Laser, and 2% chlorhexidine (CHX). Materials and Methods: The study was a randomized, single blinded, parallel grouped, active controlled trial. Eighty primary molars in 68 children with cavitated dentinal occlusal caries were randomly assigned into four groups (20 teeth each) Group I: APF gel; Group II: Propolis; Group III: Diode Laser, and Group IV: 2% CHX (control). After cavity preparation using ART procedure, dentinal samples collected before and after disinfection with respective agent of the group. These samples were subjected to microbiological evaluation, for total viable count (TVC) on blood agar, Streptococcus mutans on mutans-sanguis (MS) agar, and Lactobacilli (LB) on Rogosa agar. Results: Intragroup comparison (Wilcoxon signed rank test) showed significant reductions in TVC, MS, and LB counts in all the groups. Pairwise Mann–Whitney test showed APF gel had least bacterial reductions among the agents tested. Conclusion: This study illustrated the need for cavity disinfection. Diode Laser and Brazilian Propolis are equally effective as 2% CHX in cavity disinfection. PMID:27041900

  11. Cloud and Precipitation Radar

    NASA Astrophysics Data System (ADS)

    Hagen, Martin; Höller, Hartmut; Schmidt, Kersten

    Precipitation or weather radar is an essential tool for research, diagnosis, and nowcasting of precipitation events like fronts or thunderstorms. Only with weather radar is it possible to gain insights into the three-dimensional structure of thunderstorms and to investigate processes like hail formation or tornado genesis. A number of different radar products are available to analyze the structure, dynamics and microphysics of precipitation systems. Cloud radars use short wavelengths to enable detection of small ice particles or cloud droplets. Their applications differ from weather radar as they are mostly orientated vertically, where different retrieval techniques can be applied.

  12. Campylobacter coli pulsed field gel electrophoresis genotypic diversity among sows and piglets in a farrowing barn.

    PubMed

    Hume, Michael E; Droleskey, Robert E; Sheffield, Cynthia L; Harvey, Roger B

    2002-08-01

    Genotypes of Campylobacter coli isolates from feces of three sows and rectal swabs of 17 piglets were examined by pulsed field gel electrophoresis (PFGE). All of the animals originated from a single farrowing barn of a farrow-to-finish swine operation. Five Campylobacter colonies were picked from a single agar plate for each sample after broth enrichment and growth on Campy-Cefex agar. Genotypes were examined by PFGE after genomic DNA digestion with SmaI and SacII restriction endonucleases. Twenty SmaI genotypes and 12 SacII genotypes were detected among 99 Campylobacter coli isolates. There was no pattern of shared genotypes between sows and their respective piglets, nor between littermates. Results indicate that a high number of Campylobacter genotypes may coexist in related pigs from a single housing facility. PMID:12070692

  13. ACINETOBACTER SPP.: DISTINCT MORPHOLOGY ON EOSIN METHYLENE BLUE AGAR AS AN AID TO IDENTIFICATION IN DRINKING WATER

    EPA Science Inventory

    'Acinetobacter calcoaceticus', frequently found in drinking waters and implicated in nosocomial infections, was presumptively identified by its tiny, blue colonial appearance on Levine eosin methylene blue agar. All of the 33 isolates from drinking water showing this distinctive ...

  14. Preparation of an agar-silver nanoparticles (A-AgNp) film for increasing the shelf-life of fruits.

    PubMed

    Gudadhe, Janhavi A; Yadav, Alka; Gade, Aniket; Marcato, Priscyla D; Durán, Nelson; Rai, Mahendra

    2014-12-01

    Preparation of protective coating possessing antimicrobial properties is present day need as they increase the shelf life of fruits and vegetables. In the present study, preparation of agar-silver nanoparticle film for increasing the shelf life of fruits is reported. Silver nanoparticles (Ag-NPs) biosynthesised using an extract of Ocimum sanctum leaves, were mixed with agar-agar to prepare an agar-silver nanoparticles (A-AgNp) film. This film was surface-coated over the fruits, Citrus aurantifolium (Thornless lime) and Pyrus malus (Apple), and evaluated for the determination of antimicrobial activity of A-AgNp films using disc diffusion method, weight loss and shelf life of fruits. This study demonstrates that these A-AgNp films possess antimicrobial activity and also increase the shelf life of fruits. PMID:25429496

  15. Trace Amounts of Furan-2-Carboxylic Acids Determine the Quality of Solid Agar Plates for Bacterial Culture

    PubMed Central

    Hara, Shintaro; Isoda, Reika; Tahvanainen, Teemu; Hashidoko, Yasuyuki

    2012-01-01

    Background Many investigators have recognised that a significant proportion of environmental bacteria exist in a viable but non-culturable state on agar plates, and some researchers have also noticed that some of such bacteria clearly recover their growth on matrices other than agar. However, the reason why agar is unsuitable for the growth of some bacteria has not been addressed. Methodology/Principal Findings According to the guide of a bioassay for swarming inhibition, we identified 5-hydroxymethylfuran-2-carboxylic acid (5-HMFA) and furan-2-carboxylic acid (FA) as factors that inhibit bacterial swarming and likely inhibit extracellular polysaccharide production on agar. The furan-2-carboxylic acids 5-HMFA and FA effectively inhibited the swarming and swimming of several environmental bacteria at concentrations of 1.8 and 2.3 µg L−1 (13 and 21 nmol L−1), respectively, which are equivalent to the concentrations of these compounds in 0.3% agar. On Luria-Bertani (LB) plates containing 1.0% agar that had been previously washed with MeOH, a mixture of 5-HMFA and FA in amounts equivalent to their original concentrations in the unwashed agar repressed the swarming of Escherichia coli K12 strain W3110, a representative swarming bacterium. Conclusions/Significance Agar that contains trace amounts of 5-HMFA and FA inhibits the proliferation of some slow-growing or difficult-to-culture bacteria on the plates, but it is useful for single colony isolation due to the ease of identification of swarmable bacteria as the non-swarmed colonies. PMID:22848437

  16. In vitro/in vivo evaluation of agar nanospheres for pulmonary delivery of bupropion HCl.

    PubMed

    Varshosaz, Jaleh; Minaiyan, Mohsen; Zaki, Mohammad Reza; Fathi, Milad; Jaleh, Hossein

    2016-07-01

    Bupropion HCl is an atypical antidepressant drug with rapid and high first-pass metabolism. Sustained release dosage form of this drug is suggested for reducing its side effects which are mainly seizures. The aim of the present study was to design pulmonary agar nanospheres of bupropion HCl with effective systemic absorption and extended release properties. Bupropion HCl was encapsulated in agar nanospheres by ionic gelation, and characterized for physical and release properties. Pharmacokinetic studies on nanospheres were performed on rats by intratracheal spraying of 5 mg/kg of drug in form of nanospheres compared to intravenous and pulmonary delivery of the same dose as simple solution of the drug. The optimized nanoparticles showed particle size of 320 ± 90 nm with polydispersity index of 0.85, the zeta potential of -29.6 mV, drug loading efficiency of 43.1 ± 0.28% and release efficiency of 66.7 ± 2%. The area under the serum concentration-time profile for the pulmonary nanospheres versus simple solution was 10 237.84 versus 28.8 µg/ml min, Tmax of 360 versus 60 min and the Cmax of 1927.93 versus9.93 ng/ml, respectively. The absolute bioavailability of the drug was 86.69% for nanospheres and 0.25% for pulmonary simple solution. Our results indicate that pulmonary delivery of bupropion loaded agar nanospheres achieves systemic exposure and extends serum levels of the drug. PMID:25835223

  17. Chemisorption And Precipitation Reactions

    EPA Science Inventory

    The transport and bioavailability of chemical components within soils is, in part, controlled by partitioning between solids and solution. General terms used to describe these partitioning reactions include chemisorption and precipitation. Chemisorption is inclusive of the suit...

  18. Precipitation Estimates for Hydroelectricity

    NASA Technical Reports Server (NTRS)

    Tapiador, Francisco J.; Hou, Arthur Y.; de Castro, Manuel; Checa, Ramiro; Cuartero, Fernando; Barros, Ana P.

    2011-01-01

    Hydroelectric plants require precise and timely estimates of rain, snow and other hydrometeors for operations. However, it is far from being a trivial task to measure and predict precipitation. This paper presents the linkages between precipitation science and hydroelectricity, and in doing so it provides insight into current research directions that are relevant for this renewable energy. Methods described include radars, disdrometers, satellites and numerical models. Two recent advances that have the potential of being highly beneficial for hydropower operations are featured: the Global Precipitation Measuring (GPM) mission, which represents an important leap forward in precipitation observations from space, and high performance computing (HPC) and grid technology, that allows building ensembles of numerical weather and climate models.

  19. My NASA Data Precipitation

    NASA Video Gallery

    This lesson has two activities that help students develop a basic understanding of the relationship between cloud type and the form of precipitation and the relationship between the amount of water...

  20. IMERG Global Precipitation Rates

    NASA Video Gallery

    NASA's Global Precipitation Measurement mission has produced its first global map of rainfall and snowfall. The GPM Core Observatory launched one year ago on Feb. 27, 2014 as a collaboration betwee...

  1. [Change of leukocytic phagocytosis during repeat hemoperfusion with cross-linked agar beads entrapped attapulgite clay].

    PubMed

    Huang, Wei; Ma, Yu; Yang, Xiaolan; Tang, Xianjue; Shu, Changda

    2003-06-01

    The leukocytic phagocytosis rate and the index of phagocytosis of rats on cross-linked agar beads entrapped attapulgite clay (CAA) hemoperfusion were studied. The results revealed that the leukocytic phagocytosis rate and the index of phagocytosis descended significantly after 1 hour and rose gradually after 6 hours. Finally it reached the normal level after 48 hours. Hemoperfusion repeated two times gave similar results. In conclusion, the function of leukocytic phagocytosis declined temporarily during CAA hemoperfusion. Many times hemoperfusion will not notably affect the body's defense system of rats. PMID:12856604

  2. Coma in the course of severe poisoning after consumption of red fly agaric (Amanita muscaria).

    PubMed

    Mikaszewska-Sokolewicz, Małgorzata A; Pankowska, Sylwestra; Janiak, Marek; Pruszczyk, Piotr; Łazowski, Tomasz; Jankowski, Krzysztof

    2016-01-01

    Red fly agaric poisoning is rare. It can be consumed for suicidal purposes or its psychedelic effect. The paper describes the case of a young men, who fell into a coma after ingestion of the red toadstools. Quick identification of the poison, early use of gastric lavage and symptomatic treatment resulted in regression of symptoms and lead to the patient's discharge from the hospital on the third day after intoxication. Authors discussing the poisonous alkaloids contained in the red toadtools: ibotenic acid, muscimol, muscasone and muscarine and theirs properties, responsible for the symptoms of intoxication. PMID:26828668

  3. CHROMagar Yersinia, a New Chromogenic Agar for Screening of Potentially Pathogenic Yersinia enterocolitica Isolates in Stools

    PubMed Central

    Renaud, Nicolas; Lecci, Laetitia; Courcol, René J.; Simonet, Michel

    2013-01-01

    CHROMagar Yersinia (CAY) is a new chromogenic medium for the presumptive detection of virulent Yersinia enterocolitica in stools. Based on a comparative analysis of 1,494 consecutive stools from hospitalized patients, CAY was found to be just as sensitive as the reference medium (cefsulodin-irgasan-novobiocin agar) but was significantly more specific and had a very low false-positive rate. CAY reduces the workload (and thus costs) for stool analysis and can therefore be recommended for routine laboratory use. PMID:23363840

  4. Comparative study of 6-APA production by free and agar immobilized bacteria in nutrient broth culture.

    PubMed

    Dolui, A K; Das, S

    2011-04-01

    In the present study different bacterial samples were isolated from soil of different places of Dibrugarh and screened for biotransformation ability to produce 6-Aminopenicillanic acid. Among ten isolated bacterial samples, three gram positive bacterial samples designated as AKDD-2, AKDD-4 and AKDD-6 showed the production of 6-APA from penicillin G. Assessment of production of 6-APA after incubation in penicillin G (2 mg/ml) by three different samples separately in free and agar immobilization state was done by HPLC analysis. Reusability of immobilized cells was found successful up to 14 days. PMID:21614893

  5. Three-dimensional characterization of bacterial microcolonies on solid agar-based culture media.

    PubMed

    Drazek, Laurent; Tournoud, Maud; Derepas, Frédéric; Guicherd, Maryse; Mahé, Pierre; Pinston, Frédéric; Veyrieras, Jean-Baptiste; Chatellier, Sonia

    2015-02-01

    For the last century, in vitro diagnostic process in microbiology has mainly relied on the growth of bacteria on the surface of a solid agar medium. Nevertheless, few studies focused in the past on the dynamics of microcolonies growth on agar surface before 8 to 10h of incubation. In this article, chromatic confocal microscopy has been applied to characterize the early development of a bacterial colony. This technology relies on a differential focusing depth of the white light. It allows one to fully measure the tridimensional shape of microcolonies more quickly than classical confocal microscopy but with the same spatial resolution. Placing the device in an incubator, the method was able to individually track colonies growing on an agar plate, and to follow the evolution of their surface or volume. Using an appropriate statistical modeling framework, for a given microorganism, the doubling time has been estimated for each individual colony, as well as its variability between colonies, both within and between agar plates. A proof of concept led on four bacterial strains of four distinct species demonstrated the feasibility and the interest of the approach. It showed in particular that doubling times derived from early tri-dimensional measurements on microcolonies differed from classical measurements in micro-dilutions based on optical diffusion. Such a precise characterization of the tri-dimensional shape of microcolonies in their late-lag to early-exponential phase could be beneficial in terms of in vitro diagnostics. Indeed, real-time monitoring of the biomass available in a colony could allow to run well established microbial identification workflows like, for instance, MALDI-TOF mass-spectrometry, as soon as a sufficient quantity of material is available, thereby reducing the time needed to provide a diagnostic. Moreover, as done for pre-identification of macro-colonies, morphological indicators such as three-dimensional growth profiles derived from

  6. Amino acid mediated synthesis of silver nanoparticles and preparation of antimicrobial agar/silver nanoparticles composite films.

    PubMed

    Shankar, Shiv; Rhim, Jong-Whan

    2015-10-01

    Silver nanoparticles (AgNPs) were synthesized using amino acids (tyrosine and tryptophan) as reducing and capping agents, and they were incorporated into the agar to prepare antimicrobial composite films. The AgNPs solutions exhibited characteristic absorption peak at 420 nm that showed a red shift to ∼434 nm after forming composite with agar. XRD data demonstrated the crystalline structure of AgNPs with dominant (111) facet. Apparent surface color and transmittance of agar films were greatly influenced by the AgNPs. The incorporation of AgNPs into agar did not exhibit any change in chemical structure, thermal stability, moisture content, and water vapor permeability. The water contact angle, tensile strength, and modulus decreased slightly, but elongation at break increased after AgNPs incorporation. The agar/AgNPs nanocomposite films possessed strong antibacterial activity against Listeria monocytogenes and Escherichia coli. The agar/AgNPs film could be applied to the active food packaging by controlling the food-borne pathogens. PMID:26076636

  7. Hydride precipitation in titanium

    SciTech Connect

    Numakura, H.; Kowia, M.

    1984-10-01

    The crystal structure and morphology of hydride (deuteride) precipitates are investigated on ..cap alpha..-titanium specimens containing 1-3 at.% H or D by transmission electron microscopy. The hydride is found to have a face-centered tetragonal structure (c/a = 1.09) with an ordered arrangement of hydrogen, being isomorphous to ..gamma..-zirconium hydride. Two types of precipitation mode are observed with the habit planes (0110) and near (0225).

  8. Method for separating constituents from solution employing a recyclable Lewis acid metal-hydroxy gel

    SciTech Connect

    Alexander, D.H.

    1995-12-31

    This invention permits radionuclides, heavy metals, and organics to be extracted from solution by scavenging them with an amorphous gel. In the preferred embodiment, a contaminated solution (e.g. from soil washing, decontamination, or groundwater pumping) is transferred to a reaction vessel. The contaminated solution is contacted by the sequestering reagent which might contain for example, aluminate and EDTA anions in a 2.5 M NaOH solution. The pH of the reagent bearing solution is lowered on contact with the contaminated solution, or for example by bubbling carbon dioxide through it, causing an aluminum hydroxide gel to precipitate as the solution drops below the range of 1.8 to 2.5 molar NaOH (less than pH 14). This precipitating gel scavenges waste contaminants as it settles through solution leaving a clean supernatant which is then separated from the gel residue by physical means such as centrifugation, or simple settling. The gel residue containing concentrated contaminants is then redissolved releasing contaminants for separations and processing. This is a critical point: the stabilized gel used in this invention is readily re-dissolved by merely increasing the pH above the gels phase transition to aqueous anions. Thus, concentrated contaminants trapped in the gel can be released for convenient separation from the sequestering reagent, and said reagent can then be recycled.

  9. Optimizing Human Bile Preparation for Two-Dimensional Gel Electrophoresis

    PubMed Central

    Cheng, Hao-Tsai; Sung, Chang-Mu; Pai, Betty Chien-Jung; Liu, Nai-Jen; Chen, Carl PC

    2016-01-01

    Aims. Bile is an important body fluid which assists in the digestion of fat and excretion of endogenous and exogenous compounds. In the present study, an improved sample preparation for human bile was established. Methods and Material. The method involved acetone precipitation followed by protein extraction using commercially available 2D Clean-Up kit. The effectiveness was evaluated by 2-dimensional electrophoresis (2DE) profiling quality, including number of protein spots and spot distribution. Results. The total protein of bile fluid in benign biliary disorders was 0.797 ± 0.465 μg/μL. The sample preparation method using acetone precipitation first followed by 2D Clean-Up kit protein extraction resulted in better quality of 2DE gel images in terms of resolution as compared with other sample preparation methods. Using this protocol, we obtained approximately 558 protein spots on the gel images and with better protein spots presentation of haptoglobin, serum albumin, serotransferrin, and transthyretin. Conclusions. Protein samples of bile prepared using acetone precipitation followed by 2D Clean-Up kit exhibited high protein resolution and significant protein profile. This optimized protein preparation protocol can effectively concentrate bile proteins, remove abundant proteins and debris, and yield clear presentation of nonabundant proteins and its isoforms on 2-dimensional electrophoresis gel images. PMID:26966686

  10. Sol gel derived hydroxyapatite coatings on titanium and its alloy Ti6Al4V

    NASA Astrophysics Data System (ADS)

    Stoch, A.; Jastrzebski, W.; Długoń, E.; Lejda, W.; Trybalska, B.; Stoch, G. J.; Adamczyk, A.

    2005-06-01

    Titanium has been used for many medical and dental applications; however, its joining to a living bone is not satisfactorily good or the implant integration with bone tissue takes several months.The aim of this work is to produce hydroxyapatite (HAP) coatings on titanium and its alloy for facilitating and shortening the processes towards osseointegration. HAP coatings were obtained by sol-gel method with sol solutions prepared from calcium nitrate tetrahydrate and triammonium phosphate trihydrate as the calcium and phosphorous sources. Two types of gelatine were added to the sol: agar-agar or animals gelatine. Both were found to enhance the formation and stability of amorphous HAP using soluble salts as the sources of calcium and phosphate. HAP coatings were deposited from HAP-GEL sol using dip-withdrawal technique, then the plates were dried and annealed at temperatures 460-750 °C. FTIR spectroscopy and XRD analysis were used to study the phase composition of phosphate coatings. Morphology and chemical analysis of HAP layers was performed using a scanning electron microscope equipped with an energy dispersive X-ray analyser (SEM+EDX). The biological activity of sol-gel phosphate coatings was observed during thermostatic held in simulated body fluid (SBF). It was found that chemical composition and structure of HAP coatings depends on pH and final thermal treatment of the layer.

  11. Clarification Procedure for Gels

    NASA Technical Reports Server (NTRS)

    Barber, Patrick G.; Simpson, Norman R.

    1987-01-01

    Procedure developed to obtain transparent gels with consistencies suitable for crystal growth, by replacing sodium ions in silicate solution with potassium ions. Clarification process uses cation-exchange resin to replace sodium ions in stock solution with potassium ions, placed in 1M solution of soluble potassium salt. Slurry stirred for several hours to allow potassium ions to replace all other cations on resin. Supernatant solution decanted through filter, and beads rinsed with distilled water. Rinsing removes excess salt but leaves cation-exchange beads fully charged with potassium ions.

  12. Mechanical and water barrier properties of agar/κ-carrageenan/konjac glucomannan ternary blend biohydrogel films.

    PubMed

    Rhim, Jong-Whan; Wang, Long-Feng

    2013-07-01

    Multicomponent hydrogel films composed of agar, κ-carrageenan, konjac glucomannan powder, and nanoclay (Cloisite(®) 30B) were prepared and their mechanical and water barrier properties such as water vapor permeability (WVP), water contact angle (CA), water solubility (WS), water uptake ratio (WUR), water vapor uptake ratio (WVUR) were determined. Mechanical, water vapor barrier, and water resistance properties of the ternary blend film exhibited middle range of individual component films, however, they increased significantly after formation of nanocomposite with the clay. Especially, the water holding capacity of the ternary blend biopolymer films increased tremendously, from 800% to 1681% of WUR for agar and κ-carrageenan films up to 5118% and 5488% of WUR for the ternary blend and ternary blend nanocomposite films, respectively. Water vapor adsorption behavior of films was also tested by water vapor adsorption kinetics and water vapor adsorption isotherms test. Preliminary test result for fresh spinach packaging revealed that the ternary blend biohydrogel films had a high potential for the use as an antifogging film for packaging highly respiring agricultural produce. In addition, the ternary blend nanocomposite film showed an antimicrobial activity against Gram-positive bacteria, Listeria monocytogenes. PMID:23688456

  13. Visualization of Biosurfactant Film Flow in a Bacillus subtilis Swarm Colony on an Agar Plate

    PubMed Central

    Kim, Kyunghoon; Kim, Jung Kyung

    2015-01-01

    Collective bacterial dynamics plays a crucial role in colony development. Although many research groups have studied the behavior of fluidic swarm colonies, the detailed mechanics of its motion remains elusive. Here, we developed a visualization method using submicron fluorescent beads for investigating the flow field in a thin layer of fluid that covers a Bacillus subtilis swarm colony growing on an agar plate. The beads were initially embedded in the agar plate and subsequently distributed spontaneously at the upper surface of the expanding colony. We conducted long-term live cell imaging of the B. subtilis colony using the fluorescent tracers, and obtained high-resolution velocity maps of microscale vortices in the swarm colony using particle image velocimetry. A distinct periodic fluctuation in the average speed and vorticity of flow in swarm colony was observed at the inner region of the colony, and correlated with the switch between bacterial swarming and growth phases. At the advancing edge of the colony, both the magnitudes of velocity and vorticity of flow in swarm colony were inversely correlated with the spreading speed of the swarm edge. The advanced imaging tool developed in this study would facilitate further understanding of the effect of micro vortices in swarm colony on the collective dynamics of bacteria. PMID:26343634

  14. Evaluation of a Modified Cefsulodin-Irgasan-Novobiocin Agar for Isolation of Yersinia spp

    PubMed Central

    Tan, Lai Kuan; Ooi, Peck Toung; Carniel, Elisabeth; Thong, Kwai Lin

    2014-01-01

    Y. enterocolitica and Y. pseudotuberculosis are important food borne pathogens. However, the presence of competitive microbiota makes the isolation of Y. enterocolitica and Y. pseudotuberculosis from naturally contaminated foods difficult. We attempted to evaluate the performance of a modified Cefsulodin-Irgasan-Novobiocin (CIN) agar in the differentiation of Y. enterocolitica from non-Yersinia species, particularly the natural intestinal microbiota. The modified CIN enabled the growth of Y. enterocolitica colonies with the same efficiency as CIN and Luria-Bertani agar. The detection limits of the modified CIN for Y. enterocolitica in culture medium (10 cfu/ml) and in artificially contaminated pork (104 cfu/ml) were also comparable to those of CIN. However, the modified CIN provided a better discrimination of Yersinia colonies from other bacteria exhibiting Yersinia-like colonies on CIN (H2S-producing Citrobacter freundii, C. braakii, Enterobacter cloacae, Aeromonas hydrophila, Providencia rettgeri, and Morganella morganii). The modified CIN exhibited a higher recovery rate of Y. enterocolitica from artificially prepared bacterial cultures and naturally contaminated samples compared with CIN. Our results thus demonstrated that the use of modified CIN may be a valuable means to increase the recovery rate of food borne Yersinia from natural samples, which are usually contaminated by multiple types of bacteria. PMID:25170941

  15. Relative value of selective group A streptococcal agar incubated under different atmospheres.

    PubMed Central

    Pacifico, L; Ranucci, A; Ravagnan, G; Chiesa, C

    1995-01-01

    A commercially available selective group A streptococcal agar (ssA) was evaluated for the recovery of group A streptococci (GAS) in comparison with recovery from simultaneous cultures on conventional sheep blood agar (SBA). Both sets of plates were incubated in air, 5% CO2, and anaerobically for 48 h, with a first reading taken at 24 h. A total of 402 (67.0%) GAS were isolated from the 600 specimens that were submitted. Recovery of GAS was significantly greater after 48 h of incubation than after 24 h of incubation for each medium-atmosphere combination. After 48 h of incubation, the sensitivities of GAS detection obtained by each culture technique were as follows: ssA-anaerobic atmosphere, 98.5%; SBA-anaerobic atmosphere, 89.5%; ssA-CO2 atmosphere, 88.0%; SBA-air, 86.5%; SBA-CO2 atmosphere, 82.0%; and ssA-air, 74.6%. There were no cultures positive in air or CO2 which were not positive anaerobically on either medium. The increased sensitivity of detecting positive GAS cultures when incubation was done in an ssA-anaerobic atmosphere for 48 h uncovered patients truly infected with the organisms. PMID:7494053

  16. Visualization of Biosurfactant Film Flow in a Bacillus subtilis Swarm Colony on an Agar Plate.

    PubMed

    Kim, Kyunghoon; Kim, Jung Kyung

    2015-01-01

    Collective bacterial dynamics plays a crucial role in colony development. Although many research groups have studied the behavior of fluidic swarm colonies, the detailed mechanics of its motion remains elusive. Here, we developed a visualization method using submicron fluorescent beads for investigating the flow field in a thin layer of fluid that covers a Bacillus subtilis swarm colony growing on an agar plate. The beads were initially embedded in the agar plate and subsequently distributed spontaneously at the upper surface of the expanding colony. We conducted long-term live cell imaging of the B. subtilis colony using the fluorescent tracers, and obtained high-resolution velocity maps of microscale vortices in the swarm colony using particle image velocimetry. A distinct periodic fluctuation in the average speed and vorticity of flow in swarm colony was observed at the inner region of the colony, and correlated with the switch between bacterial swarming and growth phases. At the advancing edge of the colony, both the magnitudes of velocity and vorticity of flow in swarm colony were inversely correlated with the spreading speed of the swarm edge. The advanced imaging tool developed in this study would facilitate further understanding of the effect of micro vortices in swarm colony on the collective dynamics of bacteria. PMID:26343634

  17. Evaluation of a modified Cefsulodin-Irgasan-Novobiocin agar for isolation of Yersinia spp.

    PubMed

    Tan, Lai Kuan; Ooi, Peck Toung; Carniel, Elisabeth; Thong, Kwai Lin

    2014-01-01

    Y. enterocolitica and Y. pseudotuberculosis are important food borne pathogens. However, the presence of competitive microbiota makes the isolation of Y. enterocolitica and Y. pseudotuberculosis from naturally contaminated foods difficult. We attempted to evaluate the performance of a modified Cefsulodin-Irgasan-Novobiocin (CIN) agar in the differentiation of Y. enterocolitica from non-Yersinia species, particularly the natural intestinal microbiota. The modified CIN enabled the growth of Y. enterocolitica colonies with the same efficiency as CIN and Luria-Bertani agar. The detection limits of the modified CIN for Y. enterocolitica in culture medium (10 cfu/ml) and in artificially contaminated pork (10(4) cfu/ml) were also comparable to those of CIN. However, the modified CIN provided a better discrimination of Yersinia colonies from other bacteria exhibiting Yersinia-like colonies on CIN (H2S-producing Citrobacter freundii, C. braakii, Enterobacter cloacae, Aeromonas hydrophila, Providencia rettgeri, and Morganella morganii). The modified CIN exhibited a higher recovery rate of Y. enterocolitica from artificially prepared bacterial cultures and naturally contaminated samples compared with CIN. Our results thus demonstrated that the use of modified CIN may be a valuable means to increase the recovery rate of food borne Yersinia from natural samples, which are usually contaminated by multiple types of bacteria. PMID:25170941

  18. Inactivation of Listeria monocytogenes on agar and processed meat surfaces by atmospheric pressure plasma jets.

    PubMed

    Lee, Hyun Jung; Jung, Heesoo; Choe, Wonho; Ham, Jun Sang; Lee, Jun Heon; Jo, Cheorun

    2011-12-01

    An apparatus for generating atmospheric pressure plasma (APP) jet was used to investigate the inactivation of Listeria monocytogenes on the surface of agar plates and slices of cooked chicken breast and ham. He, N₂ (both 7 L/min), and mixtures of each with O₂ (0.07 L/min) were used to produce the plasma jets. After treatment for 2 min with APP jets of He, He + O₂, N₂, or N₂ + O₂, the numbers of L. monocytogenes on agar plates were reduced by 0.87, 4.19, 4.26, and 7.59 log units, respectively. Similar treatments reduced the L. monocytogenes inoculated onto sliced chicken breast and ham by 1.37 to 4.73 and 1.94 to 6.52 log units, respectively, according to the input gas used with the N₂ + O₂ mixture being the most effective. Most APP jets reduced the numbers of aerobic bacteria on the meat surfaces to <10² CFU/g, and the numbers remained below that level of detection after storage at 10 °C for 7 days. The results indicate that APP jets are effective for the inactivation of L. monocytogenes on sliced meats and for prolonging the shelf-life of such foods. PMID:21925030

  19. Abolition of Swarming of Proteus by p-Nitrophenyl Glycerin: Application to Blood Agar Media

    PubMed Central

    Williams, Fred D.

    1973-01-01

    Comparative plate counts were made of Staphylococcus aureus and Streptococcus pyogenes growing on blood agar supplemented with individual chemicals to abolish the swarming of Proteus. B-phenylethanol, sodium azide, and p-nitrophenyl glycerin (PNPG) were used as anti-swarm agents. Each anti-swarm agent effectively abolished swarming for 24 h, but azide failed to control swarming for longer periods of incubation. In addition, azide displayed growth inhibition towards the staphylococci and streptococci resulting in no hemolysis and reduced viable cell numbers with the streptococci. Phenylethanol showed reduced viable cell numbers with the streptococci and unreliable hemolytic reactions. At 0.1 to 0.3 mM, PNPG proved to be a superior anti-swarm agent in that it showed no growth inhibition and allowed normal hemolysis, but abolished swarming for extended periods of time. When laboratory strains of Streptococcus pneumoniae, Klebsiella pneumoniae, Pseudomonas aeruginosa. Listeria monocytogenes, and Vibrio cholerae were screened on a blood agar medium containing 0.1 mm PNPG, they displayed similar growth and hemolytic characteristics to the identical medium without PNPG. PMID:4715553

  20. High transparent shape memory gel

    NASA Astrophysics Data System (ADS)

    Gong, Jin; Arai, Masanori; Kabir, M. H.; Makino, Masato; Furukawa, Hidemitsu

    2014-03-01

    Gels are a new material having three-dimensional network structures of macromolecules. They possess excellent properties as swellability, high permeability and biocompatibility, and have been applied in various fields of daily life, food, medicine, architecture, and chemistry. In this study, we tried to prepare new multi-functional and high-strength gels by using Meso-Decoration (Meso-Deco), one new method of structure design at intermediate mesoscale. High-performance rigid-rod aromatic polymorphic crystals, and the functional groups of thermoreversible Diels-Alder reaction were introduced into soft gels as crosslinkable pendent chains. The functionalization and strengthening of gels can be realized by meso-decorating the gels' structure using high-performance polymorphic crystals and thermoreversible pendent chains. New gels with good mechanical properties, novel optical properties and thermal properties are expected to be developed.

  1. Foam and gel decontamination techniques

    SciTech Connect

    McGlynn, J.F.; Rankin, W.N.

    1989-01-01

    The Savannah River Site is investigating decontamination technology to improve current decontamination techniques, and thereby reduce radiation exposure to plant personnel, reduce uptake of radioactive material, and improve safety during decontamination and decommissioning activities. When decontamination chemicals are applied as foam and gels, the contact time and cleaning ability of the chemical increases. Foam and gel applicators apply foam or gel that adheres to the surface being decontaminated for periods ranging from fifteen minutes (foam) to infinite contact (gel). This equipment was started up in a cold environment. The desired foam and gel consistency was achieved, operators were trained in its proper maintenance and operation, and the foam and gel were applied to walls, ceilings, and hard to reach surfaces. 17 figs.

  2. Colonic cell growth and mucin degradation in rats fed diets containing various levels of beta-carotene with and without dietary agar.

    PubMed

    Hwa, S H; Shiau, S Y

    1993-06-01

    1. To either an agar-containing diet or an agar-free diet, 0, 0.3 and 2.0 mg/100 g of beta-carotene were incorporated and fed to groups of five rats for 28 days. 2. Weight gain and food consumption of rats fed different dietary groups did not show a significant difference (P > 0.05). 3. Colon weight, colonic mucosal DNA and RNA were generally higher in rats fed agar diets than rats fed agar-free diets at either beta-carotene supplementation level. 4. Mucinase activity was higher (P < 0.05) in rats fed the agar diet than in rats fed an agar-free diet without beta-carotene. However, the difference was not observed (P > 0.05) when beta-carotene was incorporated. 5. These data suggest that colonic mucin degradation in rats fed an agar diet decreased when the dietary beta-carotene inclusion level increased. PMID:7687211

  3. Polyoxometalate-based Supramolecular Gel

    NASA Astrophysics Data System (ADS)

    He, Peilei; Xu, Biao; Liu, Huiling; He, Su; Saleem, Faisal; Wang, Xun

    2013-05-01

    Self-assemblyings of surfactant-encapsulated Wells-Dawson polyoxometalates (SEPs) nanobuilding blocks in butanone and esters yielded supramolecular gels showing thermo and photo responsive properties. The gels can be further polymerized if unsaturated esters were used and subsequently electrospinned into nanowires and non-woven mats. The as-prepared non-woven mats have a Young's modulus as high as 542.55 MPa. It is believed that this supramolecular gel is a good platform for polyoxometalates processing.

  4. Method for separating contaminants from solution employing an organic-stabilized metal-hydroxy gel

    DOEpatents

    Alexander, Donald H.

    1996-01-01

    Metals and organics are extracted from solution by co-precipitating them with a gel comprising aluminum hydroxide and a complexing agent such as EDTA. After the gel is processed to remove the metals and organics, it can be recycled for further use by dissolving it in a high-pH solution, leaving no secondary waste stream. A number of alternative complexing agents perform better than EDTA.

  5. Electrically controlled polymeric gel actuators

    DOEpatents

    Adolf, Douglas B.; Shahinpoor, Mohsen; Segalman, Daniel J.; Witkowski, Walter R.

    1993-01-01

    Electrically controlled polymeric gel actuators or synthetic muscles capable of undergoing substantial expansion and contraction when subjected to changing pH environments, temperature, or solvent. The actuators employ compliant containers for the gels and their solvents. The gels employed may be cylindrical electromechanical gel fibers such as polyacrylamide fibers or a mixture of poly vinyl alcohol-polyacrylic acid arranged in a parallel aggregate and contained in an electrolytic solvent bath such as salt water. The invention includes smart, electrically activated devices exploiting this phenomenon. These devices are capable of being manipulated via active computer control as large displacement actuators for use in adaptive structure such as robots.

  6. Electrically controlled polymeric gel actuators

    DOEpatents

    Adolf, D.B.; Shahinpoor, M.; Segalman, D.J.; Witkowski, W.R.

    1993-10-05

    Electrically controlled polymeric gel actuators or synthetic muscles are described capable of undergoing substantial expansion and contraction when subjected to changing pH environments, temperature, or solvent. The actuators employ compliant containers for the gels and their solvents. The gels employed may be cylindrical electromechanical gel fibers such as polyacrylamide fibers or a mixture of poly vinyl alcohol-polyacrylic acid arranged in a parallel aggregate and contained in an electrolytic solvent bath such as salt water. The invention includes smart, electrically activated devices exploiting this phenomenon. These devices are capable of being manipulated via active computer control as large displacement actuators for use in adaptive structure such as robots. 11 figures.

  7. Gel polymer electrolytes for batteries

    DOEpatents

    Balsara, Nitash Pervez; Eitouni, Hany Basam; Gur, Ilan; Singh, Mohit; Hudson, William

    2014-11-18

    Nanostructured gel polymer electrolytes that have both high ionic conductivity and high mechanical strength are disclosed. The electrolytes have at least two domains--one domain contains an ionically-conductive gel polymer and the other domain contains a rigid polymer that provides structure for the electrolyte. The domains are formed by block copolymers. The first block provides a polymer matrix that may or may not be conductive on by itself, but that can soak up a liquid electrolyte, thereby making a gel. An exemplary nanostructured gel polymer electrolyte has an ionic conductivity of at least 1.times.10.sup.-4 S cm.sup.-1 at 25.degree. C.

  8. Colloidal thermoresponsive gel forming hybrids.

    PubMed

    Liu, Ruixue; Tirelli, Nicola; Cellesi, Francesco; Saunders, Brian R

    2010-09-15

    Colloidal hybrids comprise organic and inorganic components and are attracting considerable attention in the literature. Recently, we reported hybrid anisotropic microsheets that formed thermoresponsive gels in polymer solutions [Liu et al., Langmuir, 25, 490, 2009]. Here, we investigate the composition and properties of these hybrid colloids themselves in detail for the first time. Three different cationic PNIPAm (N-isopropylacrylamide) graft copolymers and two inorganic nanoparticle types (laponite and Ludox silica) were used to prepare a range of hybrids. Anisotropic microsheets only formed when laponite particles were added to the copolymer implying directed self-assembly. Aqueous dispersions of the microsheets spontaneously formed gels at room temperature and these gels were thermoresponsive. They represent a new class of gel forming colloid and are termed thermoresponsive gel forming hybrids. The compositions of the hybrids were determined from thermogravimetric analysis and those that gave gel forming behaviour identified. Variable-temperature rheology experiments showed that the elasticity of the gels increased linearly with temperature. The reversibility of the thermally-triggered changes in gel elasticity was investigated. The concentration dependence of the rheology data was well described by elastic percolation scaling theory and the data could be collapsed onto a master curve. The concentration exponent for the elastic modulus was 2.5. The strong attractive interactions that exist between the dispersed gel forming hybrids was demonstrated by the formation of stable thermoresponsive hybrid hydrogels through casting of hybrid dispersions. PMID:20561633

  9. Precipitating factors of insomnia.

    PubMed

    Bastien, Célyne H; Vallières, Annie; Morin, Charles M

    2004-01-01

    Insomnia is a prevalent health complaint whose onset is precipitated by a variety of factors. There is an important need to identify and describe these factors to improve our understanding of risk factors and the natural history of insomnia. This article is aimed at identifying and describing the types of precipitating factors related to the onset of insomnia. A total of 345 patients evaluated for insomnia at a sleep-disorders clinic completed a sleep survey and underwent a semistructured clinical interview. As part of the evaluation, the specific precipitating events related to the onset of insomnia were identified. Subsequently, these factors were categorized (work-school, family, physical or psychological health, or indeterminate), and their affective valence (negative, positive, or indeterminate) was coded. The most common precipitating factors of insomnia were related to family, health, and work-school events. Sixty-five percent of precipitating events had a negative valence. These events differed with the age of onset of insomnia but not with the gender of participants. These findings are useful to identify potential risk factors for insomnia and improve our understanding of the natural history of insomnia. PMID:15600224

  10. Susceptibility of a polycaprolactone-based root canal filling material to degradation using an agar-well diffusion assay

    PubMed Central

    Hiraishi, Noriko; Sadek, Fernanda T.; King, Nigel M.; Ferrari, Marco; Pashley, David H.; Tay, Franklin R

    2013-01-01

    Purpose Cholesterol esterase is both a component of salivary hydrolases as well as an inflammatory cell-derived enzyme and has been shown to cause biodegradation of methacrylate-based resin composites. This study examined whether Resilon, a polycaprolactone-based thermoplastic root filling material is susceptible to biodegradation by cholesterol esterase using agar-well diffusion assay of serially-diluted aqueous Resilon emulsions that were dispersed in agar. Materials and methods Emulsions of Resilon and polycaprolactone were prepared and dispersed in agar on culture plates. Two different concentrations of a cholesterol esterase (0.3 and 1.2 U/mL) were prepared and fed to wells prepared in the agar plates using an agar-well diffusion assay for examination the degradation of polymeric materials. Results Degradation of the emulsified Resilon was manifested as the formation of clear zones of different sizes around the agar wells. No clear zones were observed in agar wells that contain sterile distilled water as the negative control. Clinical significance Although dispersion Resilon into an emulsion is not the way in which this material is employed as a root filling material, the potential for Resilon to be degraded by cholesterol esterase is of potential concern as one cannot limit the degradation of extruded Resilon from a root apex by monocyte-derived macrophages to just the anatomical root apex. As the present study employed a high concentration of cholesterol esterase, further studies should be directed to examining the degradation of Resilon using macrophage cell cultures. PMID:18578181

  11. Characterizing an agar/gelatin phantom for image guided dosing and feedback control of high-intensity focused ultrasound.

    PubMed

    Dunmire, Barbrina; Kucewicz, John C; Mitchell, Stuart B; Crum, Lawrence A; Sekins, K Michael

    2013-02-01

    The temperature dependence of an agar/gelatin phantom was evaluated. The purpose was to predict the material property response to high-intensity focused ultrasound (HIFU) for developing ultrasound guided dosing and targeting feedback. Changes in attenuation, sound speed, shear modulus and thermal properties with temperature were examined from 20°C to 70°C for 3 weeks post-manufacture. The attenuation decreased with temperature by a power factor of 0.15. Thermal conductivity, diffusivity and specific heat all increased linearly with temperature for a total change of approximately 16%, 10% and 6%, respectively. Sound speed had a parabolic dependence on temperature similar to that of water. Initially, the shear modulus irreversibly declined with even a slight increase in temperature. Over time, the gel maintained its room temperature shear modulus with moderate heating. A stable phantom was achieved within 2 weeks post-manufacture that possessed quasi-reversible material properties up to nearly 55°C. PMID:23245823

  12. Method of repressing the precipitation of calcium fluozirconate

    DOEpatents

    Newby, B.J.; Rhodes, D.W.

    1973-12-25

    Boric acid or a borate salt is added to aqueous solutions of fluoride containing radioactive wastes generated during the reprocessing of zirconium alloy nuclear fuels which are to be converted to solid form by calcining in a fluidized bed. The addition of calcium nitrate to the aqueous waste solutions to prevent fluoride volatility during calcination, causes the precipitation of calcium fluozirconate, which tends to form a gel at fluoride concentrations of 3.0 M or greater. The boron containing species introduced into the solution by the addition of the boric acid or borate salt retard the formation of the calcium fluozirconate precipitate and prevent formation of the gel. These boron containing species can be introduced into the solution by the addition of a borate salt but preferably are introduced by the addition of an aqueous solution of boric acid. (Official Gazette)

  13. Antibody purification: ammonium sulfate fractionation or gel filtration.

    PubMed

    Grodzki, Ana Cristina; Berenstein, Elsa

    2010-01-01

    Antibodies can be purified by a variety of methods based on their unique physical and chemical properties such as size, solubility, charge, hydrophobicity and binding affinity. This chapter focuses on ammonium sulfate precipitation as a convenient first step in antibody purification in that, it allows the concentration of the starting material and the precipitation of the desired protein. The principle of ammonium sulfate precipitation lies in "salting out" proteins from the solution. The proteins are prevented to form hydrogen bonds with water and the salt facilitates their interaction with each other forming aggregates that afterward precipitate out of solution. Gel filtration or size- exclusion chromatography is also discussed in this chapter. Gel filtration is based on the relative size of protein molecules and it is of great value to separate IgMs, exchange buffers and/or desalt solutions. The columns designed to separate the proteins are composed of porous beads and the proteins will flow through the packed column inside and around the beads, depending on its size. PMID:20012814

  14. URANIUM PRECIPITATION PROCESS

    DOEpatents

    Thunaes, A.; Brown, E.A.; Smith, H.W.; Simard, R.

    1957-12-01

    A method for the recovery of uranium from sulfuric acid solutions is described. In the present process, sulfuric acid is added to the uranium bearing solution to bring the pH to between 1 and 1.8, preferably to about 1.4, and aluminum metal is then used as a reducing agent to convert hexavalent uranium to the tetravalent state. As the reaction proceeds, the pH rises amd a selective precipitation of uranium occurs resulting in a high grade precipitate. This process is an improvement over the process using metallic iron, in that metallic aluminum reacts less readily than metallic iron with sulfuric acid, thus avoiding consumption of the reducing agent and a raising of the pH without accomplishing the desired reduction of the hexavalent uranium in the solution. Another disadvantage to the use of iron is that positive ferric ions will precipitate with negative phosphate and arsenate ions at the pH range employed.

  15. FORMATION OF URANIUM PRECIPITATES

    DOEpatents

    Googin, J.M. Jr.

    1959-03-17

    A method is described for precipitation of uranium peroxide from uranium- containing solutions so as to obtain larger aggregates which facilitates washings decantations filtrations centrifugations and the like. The desired larger aggregate form is obtained by maintaining the pH of the solution in the approximate range of 1 to 3 and the temperature at about 25 deg C or below while carrytng out the precipitation. Then prior to removal of the precipitate a surface active sulfonated bicarboxyacids such as di-octyl sodium sulfo-succinates is incorporated in an anount of the order of 0.01 to 0.05 percent by weights and the slurry is allowed to ripen for about one-half hour at a temperatare below 10 deg C.

  16. Homogeneity of gels and gel-derived glasses

    NASA Technical Reports Server (NTRS)

    Mukherjee, S. P.

    1984-01-01

    The significance and implications of gel preparation procedures in controlling the homogeneity of multicomponent oxide gels are discussed. The role of physicochemical factors such as the structure and chemical reactivities of alkoxides, the formation of double-metal alkoxides, and the nature of solvent(s) are critically analyzed in the context of homogeneity of gels during gelation. Three procedures for preparing gels in the SiO2-B2O3-Na2O system are examined in the context of cation distribution. Light scattering results for glasses in the SiO2-B2O3-Na2O system prepared by both the gel technique and the conventional technique are examined.

  17. Precipitation-Regulated Feedback

    NASA Astrophysics Data System (ADS)

    Voit, Mark

    2016-07-01

    Star formation in the central galaxies of galaxy clusters appears to be fueled by precipitation of cold clouds out of hot circumgalactic gas via thermal instability. I will present both observational and theoretical support for the precipitation mode in large galaxies and discuss how it can be implemented in cosmological simulations of galaxy evolution. Galaxy cluster cores are unique laboratories for studying the astrophysics of thermal instability and may be teaching us valuable lessons about how feedback works in galaxies spanning the entire mass spectrum.

  18. Isolation and characterization of agar-digesting Vibrio species from the rotten thallus of Gracilariopsis heteroclada Zhang et Xia.

    PubMed

    Martinez, Joval N; Padilla, Philip Ian P

    2016-08-01

    Gracilariopsis heteroclada Zhang et Xia (Gracilariaceae, Rhodophyta) is one of the most studied marine seaweeds due to its economic importance. This has been cultivated extensively on commercial scale in the Philippines and other Asian countries. However, sustainable production of G. heteroclada in the Philippines could not be maximized due to the occurrence of rotten thallus disease. Thus, isolation and characterization of agar-digesting bacteria from the rotten thalli of G. heteroclada was conducted. A total of seven representative bacterial isolates were randomly selected based on their ability to digest agar as evidenced by the formation of depressions around the bacterial colonies on nutrient agar plates supplemented with 1.5% NaCl and liquefaction of agar. Gram-staining and biochemical characterization revealed that isolates tested were gram-negative rods and taxonomically identified as Vibrio parahaemolyticus (86-99.5%) and Vibrio alginolyticus (94.2-97.7%), respectively. It is yet to be confirmed whether these agar-digesting vibrios are involved in the induction and development of rotten thallus disease in G. heteroclada in concomitance with other opportunistic bacterial pathogens coupled with adverse environmental conditions. PMID:27285614

  19. Enumeration of food-borne Clostridium perfringens in egg yolk-free tryptose-sulfite-cycloserine agar.

    PubMed

    Hauschild, A H; Hilsheimer, R

    1974-03-01

    The SFP (Shahidi-Ferguson perfringens), TSC (tryptose-sulfite-cycloserine), EY (egg yolk)-free TSC, and OPSP (oleandomycin-polymyxin-sulfadiazine perfringens) agars have been tested for their suitability to enumerate Clostridium perfringens in naturally contaminated foods. Complete recoveries of C. perfringens were obtained in each of the four media, but only the TSC and EY-free TSC agars were sufficiently selective to ensure subsequent confirmatory tests without interference from facultative anaerobes. Because of some disadvantages associated with the use of egg yolk, EY-free TSC agar is recommended for enumeration of C. perfringens in foods. Several conditions for convenient shipment of foods and C. perfringens isolates with minimum loss of viability have been tested. The highest viable counts were preserved when foods were mixed 1:1 (wt/vol) with 20% glycerol and kept in a container with dry ice. Isolated C. perfringens strains remained viable for at least 2 weeks at ambient temperatures on blood agar slopes with a 2% agar overlay in screw-cap culture tubes. PMID:4363368

  20. Enumeration of Food-Borne Clostridium perfringens in Egg Yolk-Free Tryptose-Sulfite-Cycloserine Agar

    PubMed Central

    Hauschild, A. H. W.; Hilsheimer, R.

    1974-01-01

    The SFP (Shahidi-Ferguson perfringens), TSC (tryptose-sulfite-cycloserine), EY (egg yolk)-free TSC, and OPSP (oleandomycin-polymyxin-sulfadiazine perfringens) agars have been tested for their suitability to enumerate Clostridium perfringens in naturally contaminated foods. Complete recoveries of C. perfringens were obtained in each of the four media, but only the TSC and EY-free TSC agars were sufficiently selective to ensure subsequent confirmatory tests without interference from facultative anaerobes. Because of some disadvantages associated with the use of egg yolk, EY-free TSC agar is recommended for enumeration of C. perfringens in foods. Several conditions for convenient shipment of foods and C. perfringens isolates with minimum loss of viability have been tested. The highest viable counts were preserved when foods were mixed 1:1 (wt/vol) with 20% glycerol and kept in a container with dry ice. Isolated C. perfringens strains remained viable for at least 2 weeks at ambient temperatures on blood agar slopes with a 2% agar overlay in screw-cap culture tubes. PMID:4363368

  1. Antimicrobial Graft Copolymer Gels.

    PubMed

    Harvey, Amanda C; Madsen, Jeppe; Douglas, C W Ian; MacNeil, Sheila; Armes, Steven P

    2016-08-01

    In view of the growing worldwide rise in microbial resistance, there is considerable interest in designing new antimicrobial copolymers. The aim of the current study was to investigate the relationship between antimicrobial activity and copolymer composition/architecture to gain a better understanding of their mechanism of action. Specifically, the antibacterial activity of several copolymers based on 2-(methacryloyloxy)ethyl phosphorylcholine [MPC] and 2-hydroxypropyl methacrylate (HPMA) toward Staphylococcus aureus was examined. Both block and graft copolymers were synthesized using either atom transfer radical polymerization or reversible addition-fragmentation chain transfer polymerization and characterized via (1)H NMR, gel permeation chromatography, rheology, and surface tensiometry. Antimicrobial activity was assessed using a range of well-known assays, including direct contact, live/dead staining, and the release of lactate dehydrogenase (LDH), while transmission electron microscopy was used to study the morphology of the bacteria before and after the addition of various copolymers. As expected, PMPC homopolymer was biocompatible but possessed no discernible antimicrobial activity. PMPC-based graft copolymers comprising PHPMA side chains (i.e. PMPC-g-PHPMA) significantly reduced both bacterial growth and viability. In contrast, a PMPC-PHPMA diblock copolymer comprising a PMPC stabilizer block and a hydrophobic core-forming PHPMA block did not exhibit any antimicrobial activity, although it did form a biocompatible worm gel. Surface tensiometry studies and LDH release assays suggest that the PMPC-g-PHPMA graft copolymer exhibits surfactant-like activity. Thus, the observed antimicrobial activity is likely to be the result of the weakly hydrophobic PHPMA chains penetrating (and hence rupturing) the bacterial membrane. PMID:27409712

  2. Crystallization of steroids in gels

    NASA Astrophysics Data System (ADS)

    Kalkura, S. Narayana; Devanarayanan, S.

    1991-03-01

    The crystal growth and characterization of certain steriods, viz., cholesterol, cholesteryl acetate, β-sitosterol, progesterone and testosterone, in a silica gel medium is discussed. The present study shows that the single test tube diffusion method can be used to grow crystals of steroids in a silica gel medium by the reduction of steroid solubility.

  3. Nanocrystal/sol-gel nanocomposites

    DOEpatents

    Petruska, Melissa A.; Klimov, Victor L.

    2012-06-12

    The present invention is directed to solid composites including colloidal nanocrystals within a sol-gel host or matrix and to processes of forming such solid composites. The present invention is further directed to alcohol soluble colloidal nanocrystals useful in formation of sol-gel based solid composites

  4. Nanocrystal/sol-gel nanocomposites

    DOEpatents

    Petruska, Melissa A.; Klimov, Victor L.

    2007-06-05

    The present invention is directed to solid composites including colloidal nanocrystals within a sol-gel host or matrix and to processes of forming such solid composites. The present invention is further directed to alcohol soluble colloidal nanocrystals useful in formation of sol-gel based solid composites.

  5. Sol-gel synthesis of magnesium oxide-silicon dioxide glass compositions

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.

    1988-01-01

    MgO-SiO2 glasses containing up to 15 mol pct MgO, which could not have been prepared by the conventional glass melting method due to the presence of stable liquid-liquid immiscibility, were synthesized by the sol-gel technique. Clear and transparent gels were obtained from the hydrolysis and polycondensation of silicon tetraethoxide (TEOS) and magnesium nitrate hexahydrate when the water/TEOS mole ratio was four or more. The gelling time decreased with increase in magnesium content, water/TEOS ratio, and reaction temperature. Magnesium nitrate hexahydrate crystallized out of the gels containing 15 and 20 mol pct MgO on slow drying. This problem was partially alleviated by drying the gels quickly at higher temperatures. Monolithic gel samples were prepared using glycerol as the drying control additive. The gels were subjected to various thermal treatments and characterized by several methods. No organic groups could be detected in the glasses after heat treatments to approx. 800 C, but trace amounts of hydroxyl groups were still present. No crystalline phase was found from X-ray diffraction in the gel samples to approx. 890 C. At higher temperatures, alpha quartz precipitated out as the crystalline phase in gels containing up to 10 mol pct MgO. The overall activation energy for gel formation in 10MgO-90SiO2 (mol pct) system for water/TEOS mole ratio of 7.5 was calculated to be 58.7 kJ/mol.

  6. Solvent exchange-induced in situ forming gel comprising ethyl cellulose-antimicrobial drugs.

    PubMed

    Phaechamud, Thawatchai; Mahadlek, Jongjan

    2015-10-15

    Solvent-exchanged in situ forming gel is a drug delivery system which is in sol form before administration. When it contacts with the body fluid, then the water miscible organic solvent dissipates and water penetrates into the system, leading the polymer precipitation as in situ gel at the site of injection. The aim of this research was to study the parameters affecting the gel properties, drug release and antimicrobial activities of the in situ forming gels prepared from ethyl cellulose (EC) dissolved in N-methyl pyrrolidone (NMP) to deliver the antimicrobial agents (doxycycline hyclate, metronidazole and benzyl peroxide) for periodontitis treatment. The gel appearance, pH, viscosity, rheology, syringeability, gel formation, rate of water diffusion into the gels, in vitro degradation, drug release behavior and antimicrobial activities against Staphylococcus aureus, Escherichia coli, Candida albicans, Streptococcus mutans and Porphyrommonas gingivalis were determined. Increasing the amount of EC increased the viscosity of system while still exhibiting Newtonian flow and increased the work of syringeability whereas decreased the releasing of drug. The system transformed into the rigid gel formation after being injected into the simulated gingival crevicular fluid. The developed systems containing 5% w/w antimicrobial agent showed the antimicrobial activities against all test bacteria. Thus the developed solvent exchange-induced in situ forming gels comprising EC-antimicrobial drugs exhibited potential use for periodontitis treatment. PMID:26302862

  7. Characteristics of rat megakaryocyte colonies and their progenitors in agar culture

    SciTech Connect

    Kellar, K.L.; Rolovic, Z.; Evatt, B.L.; Sewell, E.T.

    1985-11-01

    The characteristics of megakaryocyte colonies that develop from megakaryocyte progenitors of rat bone marrow stimulated by rat spleen-conditioned medium (SCM) in agar culture were investigated. Colony frequency was optimal on day 7 and increased relative to both the number of cells plated and the concentration of SCM used. Colonies were categorized as small cell and big cell. Small-cell colonies had a greater proliferative potential, with a mean of 25 cells/colony. Big-cell colonies averaged 15 cells/colony. The ratio of big-cell to small-cell colonies was 0.69 +/- 0.29. Granulocyte-macrophage colonies, which were also stimulated by SCM, accounted for 70% +/- 15% of the total colonies in the cultures. Cytocidal experiments with tritiated thymidine reduced megakaryocyte colony formation by 45% and granulocyte-macrophage colony formation by 21%. The properties of rat, mouse, and human megakaryocyte progenitors as assayed in vitro are compared.

  8. Comparison of four commercial brucella agar media for growth of anaerobic organisms.

    PubMed Central

    Mangels, J I; Douglas, B P

    1989-01-01

    Four different commercial brucella blood agar plating media (Anaerobe Systems, BBL Microbiology Systems, Remel, and Scott Laboratories) were compared for the abilities to recover anaerobic organisms from clinical specimens and to support the growth of American Type Culture Collection anaerobic stock cultures. Following 24 h of incubation in an anaerobe chamber, Anaerobe Systems prereduced, anaerobically sterilized brucella plates yielded 63% of the total clinical anaerobe isolates, the Scott medium yielded 51%, the Remel medium yielded 42%, and the BBL medium yielded 37%. Poor growth of Peptostreptococcus magnus, P. anaerobius, Fusobacterium necrophorum, F. nucleatum, and pigmented Bacteroides spp. was observed on brucella media obtained from BBL, Remel, and Scott. Data obtained with stock anaerobic cultures showed that Anaerobe Systems plates yielded good growth and produced a larger colony size with all of the strains tested in 1 day, whereas poor growth of Peptostreptococcus spp., B. melaninogenicus, and Fusobacterium spp. was noted on brucella media from BBL, Remel, and Scott. PMID:2584378

  9. Nocardia pigrifrangens sp. nov., a novel actinomycete isolated from a contaminated agar plate.

    PubMed

    Wang, Liming; Zhang, Yamei; Huang, Ying; Maldonado, Luis A; Liu, Zhiheng; Goodfellow, Michael

    2004-09-01

    A polyphasic study was undertaken to establish the taxonomic position of an actinomycete strain isolated from a contaminated agar plate. The strain, designated 7031T, had morphological and chemotaxonomic properties typical of the genus Nocardia. An almost-complete 16S rRNA gene sequence determined for the strain was aligned with available sequences for nocardiae, and phylogenetic trees were inferred using three tree-generating algorithms. Strain 7031T clustered with the type strains of Nocardia carnea and Nocardia flavorosea, showing low 16S rRNA gene sequence similarities to these species (97.2 and 97.5 %, respectively). The strain was also distinguished from the closest species by a range of phenotypic properties. It is proposed that the strain be recognized as a novel species of Nocardia, Nocardia pigrifrangens sp. nov., the type strain of which is 7031T (= AS 4.1808T = JCM 11884T). PMID:15388728

  10. Antimicrobial Disk Susceptibility Testing of Leptospira spp. Using Leptospira Vanaporn Wuthiekanun (LVW) Agar.

    PubMed

    Wuthiekanun, Vanaporn; Amornchai, Premjit; Langla, Sayan; White, Nicholas J; Day, Nicholas P J; Limmathurotsakul, Direk; Peacock, Sharon J

    2015-08-01

    Leptospira Vanaporn Wuthiekanun (LVW) agar was used to develop a disk diffusion assay for Leptospira spp. Ten pathogenic Leptospira isolates were tested, all of which were susceptible to 17 antimicrobial agents (amoxicillin/clavulanic acid, amoxicillin, azithromycin, cefoxitin, ceftazidime, ceftriaxone, chloramphenicol, ciprofloxacin, clindamycin, doripenem, doxycycline, gentamicin, linezolid, nitrofurantoin, penicillin, piperacillin/tazobactam, and tetracycline). All 10 isolates had no zone of growth inhibition for four antimicrobials (fosfomycin, nalidixic acid, rifampicin, and trimethoprim/sulfamethoxazole). Of the ten Leptospira, seven had a growth inhibition zone of ≤ 21 mm for aztreonam, the zone diameter susceptibility break point for Enterobacteriaceae. This assay could find utility as a simple screening method during the epidemiological surveillance of antimicrobial resistance in Leptospira spp. PMID:26055750

  11. Injection of Acanthaster planci with thiosulfate-citrate-bile-sucrose agar (TCBS). I. Disease induction.

    PubMed

    Rivera-Posada, J A; Pratchett, M; Cano-Gómez, A; Arango-Gómez, J D; Owens, L

    2011-12-01

    This is the first report of the successful induction of a transmissible disease in the coral-eating crown-of-thorns starfish Acanthaster planci (COTS). Injection of thiosulfate-citrate-bile-sucrose agar (TCBS) culture medium into COTS induced a disease characterized by discoloured and necrotic skin, ulcerations, loss of body turgor, accumulation of colourless mucus on many spines especially at their tip, and loss of spines. Blisters on the dorsal integument broke through the skin surface and resulted in large, open sores that exposed the internal organs. Oedema and reddened digestive tissues and destruction of connective fibers were common. Moreover, healthy COTS in contact with these infected animals also displayed signs of disease and died within 24 h. TCBS induced 100% mortality in injected starfish. There was no introduction of new pathogens into the marine environment. TCBS promoted the growth of COTS' naturally occurring Vibrionales to high densities with subsequent symbiont imbalance followed by disease and death. PMID:22303625

  12. [Cryofractographic study of intercellular junctions in the populations of agar-cultivated Bordetella pertussis].

    PubMed

    Vysotskiĭ, V V; Vaisman, I Sh; Efimova, O G; Chemurzieva, N V

    1985-09-01

    The characteristic feature of replicas obtained from the freeze-fractures of B. pertussis unfixed cultures developing on casein charcoal agar for 1-7 days is the associative growth of highly polymorphic cells, ensured by the ramified system of intercellular connections (IC) formed by the derivatives of the outer layers of the cell wall. This proves that the associative location of bacterial cells, linked by numerous IC, in the preparation is not the artefact appearing in the process of their chemical fixation. In replicas obtained from the freeze-fractures of B. pertussis cultures, previously fixed with glutaraldehyde, osmic acid and uranyl acetate, oval cells with the cytoplasm having a relatively homogeneous structure and with the smoothed-out three-layer cell wall prevail. As a rule, IC are limited to the sites of direct contacts between individual cells. PMID:2866645

  13. Growth of Bacillus cereus on solid media as affected by agar, sodium chloride, and potassium sorbate.

    PubMed

    Stecchini, M L; Del Torre, M; Donda, S; Maltini, E

    2000-07-01

    The effect of two independent variables: microstructure, as modified by the agar content (1.0, 4.0, 7.0%), and water activity (a(w)), as modified by the NaCl content (0.5, 2.5, 4.5%), in the absence or in the presence of potassium sorbate (0.0; 2,000 ppm) on Bacillus cereus growth on solid media was studied. The time to visible growth (TVG) and the radial growth rate (RGR) of colonies were evaluated. TVG was not affected by microstructure and K-sorbate, although when a(w) was reduced, TVG tended to increase. RGR depended on linear effects of microstructure and a(w) variables and their interaction. When K-sorbate was added to cultural media, RGR was reduced significantly. However, in the presence of K-sorbate, RGR was found to change only when a(w) vas varied. PMID:10914662

  14. Nutrient Requirements of Renibacterium salmoninarum on Agar and in Broth Media.

    PubMed

    Daly, J G; Stevenson, R M

    1993-07-01

    In well-aerated broth cultures, good growth of Renibacterium salmoninarum was obtained in a serum-free medium consisting of 1% peptone, 1% yeast extract, and 0.1% l-cysteine (PYC broth). In contrast, serum or charcoal is required for growth on agar medium. Charcoal treatment of broth media, either before bacterial inoculation or during growth, increased the growth of R. salmoninarum, whereas the surfactants Tween 20 and Tween 80 inhibited growth. l-Cysteine was essential for optimal growth. Other organic sulfur compounds, such as d-cysteine, l-methionine, homocysteine, homocysteine thiolactone, and reduced glutathione, supported only lower levels of growth, while cystine and dithiothreitol did not allow growth. PMID:16348993

  15. Nutrient Requirements of Renibacterium salmoninarum on Agar and in Broth Media

    PubMed Central

    Daly, J. G.; Stevenson, R. M. W.

    1993-01-01

    In well-aerated broth cultures, good growth of Renibacterium salmoninarum was obtained in a serum-free medium consisting of 1% peptone, 1% yeast extract, and 0.1% l-cysteine (PYC broth). In contrast, serum or charcoal is required for growth on agar medium. Charcoal treatment of broth media, either before bacterial inoculation or during growth, increased the growth of R. salmoninarum, whereas the surfactants Tween 20 and Tween 80 inhibited growth. l-Cysteine was essential for optimal growth. Other organic sulfur compounds, such as d-cysteine, l-methionine, homocysteine, homocysteine thiolactone, and reduced glutathione, supported only lower levels of growth, while cystine and dithiothreitol did not allow growth. PMID:16348993

  16. Charcoal agar, a new growth medium for the fish disease bacterium Renibacterium salmoninarum.

    PubMed Central

    Daly, J G; Stevenson, R M

    1985-01-01

    Charcoal is an effective replacement for serum in media for the isolation and culture of Renibacterium salmoninarum, the causative agent of bacterial kidney disease in salmonid fish. The medium, KDM-C, contains 10 g of peptone, 0.5 g of yeast extract, 1 g of L-cysteine hydrochloride, 1 g of activated charcoal, and 15 g of agar per liter and is adjusted to pH 6.8 with NaOH before autoclaving. Eight strains of R. salmoninarum grew from dilute inocula as well on KDM-C as on a standard serum-containing medium (KDM-2). The medium was effective for both primary isolations from fish and repeated transfers and has potential value for antigen preparation and physiological studies. Images PMID:4083882

  17. Comparison of Antifungal Activity of 2% Chlorhexidine, Calcium Hydroxide, and Nanosilver gels against Candida Albicans

    PubMed Central

    Mozayeni, Mohammad Ali; Hadian, Ali; Bakhshaei, Pedram; Dianat, Omid

    2015-01-01

    Objectives: Residual microorganisms in the root canal system (RCS) after endodontic therapy such as Candida albicans are a major cause of endodontic failure. Calcium hydroxide (CH) and chlorhexidine (CHX) have suitable antimicrobial activity against bacteria and can be used as intracanal medicaments. Nanosilver has also shown antimicrobial activity against microorganisms. This study aimed to compare the antifungal effect of calcium hydroxide, 2% chlorhexidine and nanosilver gels on Candida albicans. Materials and Methods: Eighty-one single-rooted teeth were selected. After root canal preparation, the teeth were contaminated. After culture, the teeth were randomly divided into 4 groups. In experimental groups, 24 teeth were selected and completely filled with CH, 2% CHX and nanosilver gels in each group. Nine teeth were selected in the control group and filled with saline solution. After 1, 3, and 7 days, samples were obtained by #30 sterile paper points, and #2 and #4 Gates Glidden drills and cultured on solid Sabouraud agar. Results: The results demonstrated that CH and 2% CHX had equal antifungal effects on samples taken by paper point and #2 Gates Glidden drill at all time points. Both CH and 2% CHX were more effective than nanosilver at all time periods. There was no statistically significant difference between medicaments in samples taken by #4 Gates Glidden drill. Conclusion: CH and 2% CHX gels have significantly higher antifungal activity than nanosilver gel. Also, CH and 2% CHX gels are equally effective against Candida albicans. PMID:26056520

  18. Starch and chitosan oligosaccharides as interpenetrating phases in poly(N-isopropylacrylamide) injectable gels.

    PubMed

    Vieira, Jacquelin N; Posada, James J; Rezende, Rodrigo A; Sabino, Marcos A

    2014-04-01

    Thermosensitive interpenetrating gels were prepared by physically blending poly(N-isopropylacrylamide) (PNIPA) as the matrix and the following polysaccharides as interpenetrating phases: chitosan oligosaccharides (identified as QNAD and QNED) and soluble starch (STARCH). The molecular weight of the dispersed phase, the free water/bound water ratio and the thermosensitivity (transition temperature: LCST) of the gels were determined. It was found that these gels are pseudoplastic and that their viscosity depends on the molecular weight of the dispersed phase. LCST transition occurred around 35-37°C. The morphology of the porosity of the freeze-dried samples was studied by Scanning Electron Microscopy (SEM). An in vitro test of cell hemolysis on blood agar showed that these gels are noncytotoxic. According to the results obtained, these interpenetrating gels show characteristics of an injectable material, and have a transition LCST at body temperature, which reinforces their potential to be used in the surgical field and as scaffolds for tissue engineering. PMID:24582218

  19. Development of a gel formulation of formic acid for control of parasitic mites of honey bees.

    PubMed

    Kochansky, J; Shimanuki, H

    1999-09-01

    Formic acid has been used in various countries for the control of parasitic mites of honey bees (Apis mellifera), particularly the Varroa mite (Varroa jacobsoni) and the tracheal mite (Acarapis woodi). Its corrosivity and consequent fear of liability have precluded commercial interest in the United States, and its rapid vaporization requires frequent reapplication. We have developed a gel formulation of formic acid which provides controlled release over 2-3 weeks and improves the convenience and safety of handling of formic acid. The strong acidity of formic acid restricts the choice of gelling agents; vegetable gellants such as agar are destroyed, and bentonite clay derivatives do not gel, even with high-shear mixing. Polyacrylamides lead to viscous liquids lacking thixotropic properties. High-molecular-weight poly(acrylic acids) and fumed silicas provided gels with suitable physical characteristics. The poly(acrylic acid) gels were difficult to mix and gave slower and nonlinear release behavior, while the fumed silica gels were easy to prepare and linear in formic acid vaporization. PMID:10552733

  20. [Bacteriostatic and/or bactericidal extract of Aloe vera gel on cultures of Listeria monocytogenes].

    PubMed

    Ramírez Mérida, Luis Guillermo; Morón de Salim, Alba; Catinella, Rosangela; Castillo, Luis

    2012-03-01

    Listeria monocytogenes is a bacteria responsible for food borne diseases (FBD). The effect of Aloe vera gel extract as a possible bacteriostatic and/or bactericidal against Listeria monocytogenes, was checked by determined the minimum inhibitory concentration (MIC), the time of minimum inhibition (TMI) and minimum bactericidal concentration (MBC) solutions extract of Aloe vera gel in different concentrations on cultures of Listeria monocytogenes ATCC 7635. We applied the agar diffusion method, using solutions of extract of Aloe vera gel at concentrations of 0 to 100% for the MIC. The TMI was determined by growth curves in trypticase soy broth with an initial inoculum of Listeria monocytogenes ATCC 7635 of 108 CFU/mL in each solution. It was determined that the MIC was 10% extract of Aloe vera gel and TMI was 5 hours at concentrations of 10%, 20% and 30% of Aloe vera, while concentrations of 50, 80, 90 and 100%, the time was 8 hours. It was found that indeed the Aloe vera gel is bacteriostatic power on Listeria monocytogenes (p < 0.001), but yet, no bactericidal effect was obtained in our study. PMID:23477211

  1. EFFECTS OF ACID PRECIPITATION

    EPA Science Inventory

    Recent reviews of available data indicate that precipitation in a large region of North America is highly acidic when its pH is compared with the expected pH value of 5.65 for pure rain water in equilibrium with CO2. A growing body of evidence suggests that acid rain is responsib...

  2. Global precipitation measurement (GPM)

    NASA Astrophysics Data System (ADS)

    Neeck, Steven P.; Flaming, Gilbert M.; Adams, W. James; Smith, Eric A.

    2001-12-01

    The National Aeronautics and Space Administration (NASA) is studying options for future space-based missions for the EOS Follow-on Era (post 2003), building upon the measurements made by Pre-EOS and EOS First Series Missions. One mission under consideration is the Global Precipitation Measurement (GPM), a cooperative venture of NASA, Japan, and other international partners. GPM will capitalize on the experience of the highly successful Tropical Rainfall Measurement Mission (TRMM). Its goal is to extend the measurement of rainfall to high latitudes with high temporal frequency, providing a global data set every three hours. A reference concept has been developed consisting of an improved TRMM-like primary satellite with precipitation radar and microwave radiometer to make detailed and accurate estimates of the precipitation structure and a constellation of small satellites flying compact microwave radiometers to provide the required temporal sampling of highly variable precipitation systems. Considering that DMSP spacecraft equipped with SSMIS microwave radiometers, successor NPOESS spacecraft equipped with CMIS microwave radiometers, and other relevant international systems are expected to be in operation during the timeframe of the reference concept, the total number of small satellites required to complete the constellation will be reduced. A nominal plan is to begin implementation in FY'03 with launches in 2007. NASA is presently engaged in advanced mission studies and advanced instrument technology development related to the mission.

  3. The Global Precipitation Mission

    NASA Technical Reports Server (NTRS)

    Braun, Scott; Kummerow, Christian

    2000-01-01

    The Global Precipitation Mission (GPM), expected to begin around 2006, is a follow-up to the Tropical Rainfall Measuring Mission (TRMM). Unlike TRMM, which primarily samples the tropics, GPM will sample both the tropics and mid-latitudes. The primary, or core, satellite will be a single, enhanced TRMM satellite that can quantify the 3-D spatial distributions of precipitation and its associated latent heat release. The core satellite will be complemented by a constellation of very small and inexpensive drones with passive microwave instruments that will sample the rainfall with sufficient frequency to be not only of climate interest, but also have local, short-term impacts by providing global rainfall coverage at approx. 3 h intervals. The data is expected to have substantial impact upon quantitative precipitation estimation/forecasting and data assimilation into global and mesoscale numerical models. Based upon previous studies of rainfall data assimilation, GPM is expected to lead to significant improvements in forecasts of extratropical and tropical cyclones. For example, GPM rainfall data can provide improved initialization of frontal systems over the Pacific and Atlantic Oceans. The purpose of this talk is to provide information about GPM to the USWRP (U.S. Weather Research Program) community and to discuss impacts on quantitative precipitation estimation/forecasting and data assimilation.

  4. Total Precipitable Water

    SciTech Connect

    2012-01-01

    The simulation was performed on 64K cores of Intrepid, running at 0.25 simulated-years-per-day and taking 25 million core-hours. This is the first simulation using both the CAM5 physics and the highly scalable spectral element dynamical core. The animation of Total Precipitable Water clearly shows hurricanes developing in the Atlantic and Pacific.

  5. Evaluation of agar dilution and broth microdilution methods to determine the disinfectant susceptibility.

    PubMed

    Wu, Guoyan; Yang, Qianru; Long, Mei; Guo, Lijuan; Li, Bei; Meng, Yue; Zhang, Anyun; Wang, Hongning; Liu, Shuliang; Zou, Likou

    2015-11-01

    A variety of disinfectants have been widely used in veterinary hygiene, food industries and environments, which could induce the development of bacterial resistance to disinfectants. The methods used to investigate antimicrobial effects of disinfectant vary considerably among studies, making comparisons difficult. In this study, agar dilution and broth microdilution methods were used to compare the antimicrobial activities of four quaternary ammonium compounds (QACs) against foodborne and zoonotic pathogens. The potential relationship between the presence of QACs resistance genes and phenotypic resistance to QACs was also investigated. Our results indicated that the minimum inhibitory concentrations (MICs) determined by two methods might be different depended upon different QACs and bacteria applied. Regardless of the testing methods, Klebsiella pneumoniae was more tolerant among Gram-negative strains to four QACs, followed by Salmonella and Escherichia coli. The agreement between MICs obtained by the two methods was good, for benzalkonium chloride (78.15%), didecyldimethylammonium chloride (DDAC) (82.35%), cetylpyridinium chloride (CTPC) (97.48%) and cetyltrimethylammonium bromide (CTAB) (99.16%), respectively. Among all Gram-negative bacteria, 94.55% (n=52) of qacEΔ1-positive strains showed higher MICs (512 mg l(-1)) to CTAB. The qacEΔ1 gene was highly associated (P<0.05) with the high MICs of QACs (⩾512 mg l(-1)). In addition, DDAC remained as the most effective disinfectant against both Gram-positive and Gram-negative bacteria. This is the first study that compared the agar dilution and broth microdilution methods to assess the antimicrobial activity of QACs. The study demonstrated the need to standardize method that would be used in evaluating QACs antimicrobial properties in the future. PMID:25944532

  6. Evolutionary consequences of putative intra-and interspecific hybridization in agaric fungi.

    PubMed

    Hughes, Karen W; Petersen, Ronald H; Lodge, D Jean; Bergemann, Sarah E; Baumgartner, Kendra; Tulloss, Rodham E; Lickey, Edgar; Cifuentes, Joaquin

    2013-01-01

    Agaric fungi of the southern Appalachian Mountains including Great Smoky Mountains National Park are often heterozygous for the rDNA internal transcribed spacer region (ITS) with >42% of collections showing some heterozygosity for indels and/or base-pair substitutions. For these collections, intra-individual haplotype divergence is typically less than 2%, but for 3% of these collections intra-individual haplotype divergence exceeds that figure. We hypothesize that high intra-individual haplotype divergence is due to hybridization between agaric fungi with divergent haplotypes, possibly migrants from geographically isolated glacial refugia. Four species with relatively high haplotype divergence were examined: Armillaria mellea, Amanita citrina f. lavendula, Gymnopus dichrous and the Hygrocybe flavescens/chlorophana complex. The ITS region was sequenced, haplotypes of heterozygotes were resolved through cloning, and phylogenetic analyses were used to determine the outcome of hybridization events. Within Armillaria mellea and Amanita citrina f. lavendula, we found evidence of interbreeding and recombination. Within G. dichrous and H. flavescens/chlorophana, hybrids were identified but there was no evidence for F2 or higher progeny in natural populations suggesting that the hybrid fruitbodies might be an evolutionary dead end and that the genetically divergent Mendelian populations from which they were derived are, in fact, different species. The association between ITS haplotype divergence of less than 5% (Armillaria mellea = 2.6% excluding gaps; Amanita citrina f. lavendula = 3.3%) with the presence of putative recombinants and greater than 5% (Gymnopus dichrous = 5.7%; Hygrocybe flavescens/chlorophana = 14.1%) with apparent failure of F1 hybrids to produce F2 or higher progeny in populations may suggest a correlation between genetic distance and reproductive isolation. PMID:23928423

  7. Evaluation of use of a new chromogenic agar in detection of urinary tract pathogens.

    PubMed

    Samra, Z; Heifetz, M; Talmor, J; Bain, E; Bahar, J

    1998-04-01

    CHROMagar Orientation, a new chromogenic medium, was evaluated for the detection and differentiation of gram-positive and gram-negative pathogenic microorganisms in 900 urine samples from hospitalized patients. Performance characteristics of the medium were evaluated in comparison to those of 5% sheep blood and MacConkey agars by direct inoculation of the urine samples on the three media. Four gram-negative and two gram-positive strains as well as one yeast control strain from the American Type Culture Collection were used to ensure quality control. CHROMagar Orientation succeeded in detecting all the urine pathogens that were detected by the reference media, including gram-negative bacilli, staphylococci, streptococci, and yeasts. Colony color and morphology on CHROMagar Orientation accurately differentiated Escherichia coli, Proteus mirabilis, Proteus vulgaris, Pseudomonas aeruginosa, and Acinetobacter spp. Owing to the similarity in the pigmentation produced by Klebsiella, Enterobacter, and Citrobacter isolates, the medium failed to distinguish among them; however, these isolates were easily recognized as coliforms because of their metallic blue coloration. Staphylococci were clearly perceptible: S. aureus and S. epidermidis grow in regular-size colonies that range from opaque white to yellowish, and S. saprophyticus produces opaque pink colonies. All streptococcus strains, including those from groups B and C, were detected. They grow as undifferentiated flat dry diffused colonies, and additional tests were required for identification. Enterococci were easily discriminated by their strong turquoise pigmentation and their typical growth on the agar's surface. Yeast grow in typical creamy wet convex colonies. The accuracy of antibiotic susceptibility determinations according to standard methods was also tested by picking isolates directly from CHROMagar Orientation. The results showed excellent correlation with those obtained with microorganisms picked from

  8. Antimicrobial activity of Gel-entrapped catechins toward oral microorganisms.

    PubMed

    Tamura, Muneaki; Saito, Hideo; Kikuchi, Kuniyoshi; Ishigami, Tomohiko; Toyama, Yoshio; Takami, Masao; Ochiai, Kuniyasu

    2011-01-01

    The oral cavity contains almost half of the commensal bacterial population present in the human body. An increase in the number of these microorganisms may result in systemic diseases such as infective endocarditis and aspiration pneumonia as well as oral infections. It is essential to control the total numbers of these microorganisms in order to suppress disease onset. Thus, we examined the antimicrobial activity of a newly developed gel-entrapped catechin (GEC) preparation against oral microorganisms. The minimum inhibitory concentration (MIC) of GEC was determined based on the relationship between a modified agar diffusion method and a broth microdilution method. GEC inhibited the growth of the Actinomyces, periodontopathic bacteria and Candida strains tested, but did not inhibit the growth of the oral streptococci that are important in the normal oral flora. Commercially available moisture gels containing antimicrobial components showed antimicrobial activity against all of the tested strains. After a series of washes and after a 24-h incubation, GEC retained the antimicrobial activity of the catechins. Catalase prevented GEC-induced growth inhibition of Actinomyces naeslundii and Streptococcus mutans suggesting that hydrogen peroxide may be involved in the antimicrobial activity of catechins. These results suggest that GEC may be useful for controlling oral microorganism populations and reducing the accumulation of dental plaque, thereby helping to prevent periodontal disease and oral candidiasis. PMID:21532150

  9. Impaction onto a Glass Slide or Agar versus Impingement into a Liquid for the Collection and Recovery of Airborne Microorganisms

    PubMed Central

    Juozaitis, Arvydas; Willeke, Klaus; Grinshpun, Sergey A.; Donnelly, Jean

    1994-01-01

    To study impaction versus impingement for the collection and recovery of viable airborne microorganisms, three new bioaerosol samplers have been designed and built. They differ from each other by the medium onto which the bioaerosol particles are collected (glass, agar, and liquid) but have the same inlet and collection geometries and the same sampling flow rate. The bioaerosol concentrations recorded by three different collection techniques have been compared with each other: impaction onto a glass slide, impaction onto an agar medium, and impingement into a liquid. It was found that the particle collection efficiency of agar slide impaction depends on the concentration of agar in the collection medium and on the sampling time, when samples are collected on a nonmoving agar slide. Impingement into a liquid showed anomalous behavior with respect to the sampling flow rate. Optimal sampling conditions in which all three new samplers exhibit the same overall sampling efficiency for nonbiological particles have been established. Inlet and collection efficiencies of about 100% have been achieved for all three devices at a sampling flow rate of 10 liters/min. The new agar slide impactor and the new impinger were then used to study the biological factors affecting the overall sampling efficiency. Laboratory experiments on the total recovery of a typical environmental microorganism, Pseudomonas fluorescens ATCC 13525, showed that both sampling methods, impaction and impingement, provided essentially the same total recovery when relatively nonstressed microorganisms were sampled under optimal sampling conditions. Comparison tests of the newly developed bioaerosol samplers with those commercially available showed that the incorporation of our research findings into the design of the new samplers yields better performance data than data from currently available samplers. PMID:16349217

  10. Laboratory detection of extended-spectrum-beta-lactamase-producing Enterobacteriaceae: evaluation of two screening agar plates and two confirmation techniques.

    PubMed

    Overdevest, I T M A; Willemsen, I; Elberts, S; Verhulst, C; Kluytmans, J A J W

    2011-02-01

    The worldwide prevalence of extended-spectrum-beta-lactamase-producing ESBL-producing Enterobacteriaceae (ESBL-E) is increasing, making the need for optimized detection techniques more urgent. In this study we investigated the performance of two ESBL-E screening and two ESBL-E confirmation techniques. In accordance with the Dutch national guidelines (www.wip.nl), a collection of 642 highly resistant Enterobacteriaceae strains, as identified by Vitek2, was used to test the performances of two screening techniques (EbSA ESBL agar plate and ChromID ESBL agar plate) and of two confirmation techniques (MIC-strip ESBL and Vitek2 ESBL test panel). The individual test results were compared by using Etest, followed by a combination disk test if Etest results were inconclusive. Among group 1 isolates (Escherichia coli, Klebsiella spp., Proteus spp., Salmonella spp., and Shigella spp.) 291 (57.6%) were ESBL-E, versus 65 (47.4%) in group 2 (Enterobacter spp., Citrobacter spp., Morganella morganii, Serratia spp., and Providencia spp.). The sensitivities of all four tests for group 1 were comparable (EbSA, 96.6%; ChromID, 97.3%; MIC-strip, 99.6%; and Vitek2, 95.1%). The specificities of the EbSA and ChromID were the same (93.9%). However, the confirmation techniques produced many inconclusive test results, which reduces the applicability in routine laboratories. Only the two screening agar plates were validated for ESBL testing of group 2 microorganisms. They showed comparable sensitivities; however, the EbSA screening agar plate had a significantly higher specificity (78.6% versus 44.3%). In conclusion the screening agar plates performed better than the two confirmation techniques. The EbSA agar plate had the best overall performance. PMID:21123527

  11. Bouncing gel balls: Impact of soft gels onto rigid surface

    NASA Astrophysics Data System (ADS)

    Tanaka, Y.; Yamazaki, Y.; Okumura, K.

    2003-07-01

    After being thrown onto a solid substrate, very soft spherical gels bounce repeatedly. Separate rheological measurements suggest that these balls can be treated as nearly elastic. The Hertz contact deformation expected in the static (elastic) limit was observed only at very small impact velocities. For larger velocities, the gel ball deformed into flattened forms like a pancake. We measured the size of the gel balls at the maximal deformation and the contact time as a function of velocities for samples different in the original spherical radius and the Young modulus. The experimental results revealed a number of scaling relations. To interpret these relations, we developed scaling arguments to propose a physical picture.

  12. SON68 glass dissolution driven by magnesium silicate precipitation

    NASA Astrophysics Data System (ADS)

    Fleury, Benjamin; Godon, Nicole; Ayral, André; Gin, Stéphane

    2013-11-01

    Experimental results are reported on the effect of magnesium silicate precipitation on the mechanisms and rate of borosilicate glass dissolution. Leaching experiments with SON68 glass, a borosilicate containing no Mg, were carried out in initially deionized water at 50 °C with a glass-surface-area-to-solution-volume ratio of 20,000 m-1. After 29 days of alteration the experimental conditions were modified by the addition of Mg to trigger the precipitation of Mg-silicate. Additional experiments were conducted to investigate the importance of other parameters such as pH or dissolved silica on the mechanisms of precipitation of Mg-silicates and their consequences on the glass dissolution rate. Mg-silicates precipitate immediately after Mg is added. The amount of altered glass increases with the quantity of added Mg, and is smaller when silicon is added in solution. A time lag is observed between the addition of magnesium and the resumption of glass alteration because silicon is first provided by partial dissolution of the previously formed alteration gel. It is shown that nucleation does not limit Mg-silicate precipitation. A pH above 8 is necessary for the phase to precipitate under the investigated experimental conditions. On the other hand the glass alteration kinetics limits the precipitation if the magnesium is supplied in solution at a non-limiting rate. The concentration of i in solution was analyzed as well as that of boron. The quantity of i released from the glass is estimated with the assumption that i and B are released congruently at the glass dissolution front. The remained quantity of the element i is then supposed to be in the gel or in the secondary phase. In this paper, we do not make a difference between gel and hydrated glass using the same word 'gel' whereas Gin et al. [40] makes this difference. Recent papers [40,41] discussed about different key issues related to the passivation properties of the alteration layer including the hydrated glass

  13. Precipitation Indices Low Countries

    NASA Astrophysics Data System (ADS)

    van Engelen, A. F. V.; Ynsen, F.; Buisman, J.; van der Schrier, G.

    2009-09-01

    Since 1995, KNMI published a series of books(1), presenting an annual reconstruction of weather and climate in the Low Countries, covering the period AD 763-present, or roughly, the last millennium. The reconstructions are based on the interpretation of documentary sources predominantly and comparison with other proxies and instrumental observations. The series also comprises a number of classifications. Amongst them annual classifications for winter and summer temperature and for winter and summer dryness-wetness. The classification of temperature have been reworked into peer reviewed (2) series (AD 1000-present) of seasonal temperatures and temperature indices, the so called LCT (Low Countries Temperature) series, now incorporated in the Millennium databases. Recently we started a study to convert the dryness-wetness classifications into a series of precipitation; the so called LCP (Low Countries Precipitation) series. A brief outline is given here of the applied methodology and preliminary results. The WMO definition for meteorological drought has been followed being that a period is called wet respectively dry when the amount of precipitation is considerable more respectively less than usual (normal). To gain a more quantitative insight for four locations, geographically spread over the Low Countries area (De Bilt, Vlissingen, Maastricht and Uccle), we analysed the statistics of daily precipitation series, covering the period 1900-present. This brought us to the following definition, valid for the Low Countries: A period is considered as (very) dry respectively (very) wet if over a continuous period of at least 60 days (~two months) cq 90 days (~three months) on at least two out of the four locations 50% less resp. 50% more than the normal amount for the location (based on the 1961-1990 normal period) has been measured. This results into the following classification into five drought classes hat could be applied to non instrumental observations: Very wet period

  14. Variation in the excitability of developed D. discoideum cells as a function of agar concentration in the substrate

    NASA Astrophysics Data System (ADS)

    Oikawa, Noriko; Bae, Albert; Amselem, Gabriel; Bodenschatz, Eberhard

    2010-03-01

    In the absence of nutrients, Dictyostelium discoideum cells enter a developmental cycle--they signal each other, aggregate, and ultimately form fruiting bodies. During the signaling stage, the cells relay waves of cyclic adenosine 3',5' monophosphate (cAMP). We observed a transition from spiral to circular patterns in the signaling wave, depending on the agar concentration of the substrate. In this talk we will present the changes in the times for the onset of signaling and synchronization versus agar concentration, as measured by spectral entropy. We also will discuss the origin of these effects.

  15. Modified agar dilution susceptibility testing method for determining in vitro activities of antifungal agents, including azole compounds.

    PubMed Central

    Yoshida, T; Jono, K; Okonogi, K

    1997-01-01

    In vitro activities of antifungal agents, including azole compounds, against yeasts were easily determined by using RPMI-1640 agar medium and by incubating the plates in the presence of 20% CO2. The end point of inhibition was clear by this method, even in the case of azole compounds, because of the almost complete inhibition of yeast growth at high concentrations which permitted weak growth of some Candida strains by traditional methods. MICs obtained by the agar dilution method were similar to those obtained by the broth dilution method proposed by the National Committee for Clinical Laboratory Standards. PMID:9174197

  16. Growth of clinical isolates of anaerobic bacteria on agar media: effects of media composition, storage conditions, and reduction under anaerobic conditions.

    PubMed Central

    Murray, P R

    1978-01-01

    The quantitative growth, the colony size, and the rate of growth of 47 clinical anaerobic isolates were compared on five different media, namely Brucella agar, brain heart infusion agar, Columbia agar, Schaedler agar, and tryptic soy agar. There was no significant difference in the quantitative growth of the anaerobes inoculated onto the five media. Although no single medium was superior for the growth of all isolates, 12 of 22 isolates, inoculated onto media stored for 4 weeks or less, grew best on Schaedler agar. The effects of supplementation of the media with reducing agents and reduction of the media before use were also analyzed and were found to be affected by the composition and length of storage of the media, as well as the bacteria tested. PMID:744801

  17. Does elevating silver content in zinc-based glass polyalkenoate cements increase their antibacterial efficacy against two common bacteria using the agar gel diffusion method?

    PubMed

    Coughlan, A; Breed, S M; Ashraf, C; Cardinale, J A; Hall, M M; Towler, M R

    2013-03-01

    The authors have previously shown that it is possible to incorporate silver into a soda-zinc-silicate glass and subsequently form a glass polyalkenoate cement from it. The objective of the research described herein is to determine if incremental increases in the silver content of these glass polyalkenoate cements will increase their antibacterial efficacy against gram-positive and gram-negative bacteria using the accepted spread plate method. Four glass polyalkenoate cements were formulated; three contained increasing amounts of silver incorporated into them (cements A, B, and C, containing 0.33 mol%, 0.66 mol%, and 0.99 mol% silver, respectively) and a fourth contained no silver, which acted as a control (control cement). The handling properties of the glass polyalkenoate cements were evaluated, where working times were around 2 min and setting times ranged from 1 h 17 min to 2 h 41 min. Inductively coupled plasma atomic emission spectroscopy was employed to determine silver ion release with cement maturation for up to 14 days. The majority of silver ions were released within the first 24 h, with up to 2 mg/L cumulative ion release recorded up to 14 days. The antibacterial properties of the coatings were evaluated against Staphylococcus aureus and Pseudomonas aeruginosa bacteria. The silver-glass polyalkenoate cements exhibited antibacterial effect against both bacterial strains. The maximum inhibition zones recorded against S. aureus was 14.8 mm (SD ± 1.11) and against P. aeruginosa was 20.6 mm (SD ± 0.81). Cement B had a greater antibacterial effect compared to cement A, however, cements B and C had comparable antibacterial effects after 14 days even though cement C contained 0.33 mol% more silver than B. This indicates that by increasing the silver content in these cements, the antibacterial efficacy increases to a point, but there is a threshold where further silver ion release does not increase the antibacterial effect. PMID:22262577

  18. Mechanical Failure in Colloidal Gels

    NASA Astrophysics Data System (ADS)

    Kodger, Thomas Edward

    When colloidal particles in a dispersion are made attractive, they aggregate into fractal clusters which grow to form a space-spanning network, or gel, even at low volume fractions. These gels are crucial to the rheological behavior of many personal care, food products and dispersion-based paints. The mechanical stability of these products relies on the stability of the colloidal gel network which acts as a scaffold to provide these products with desired mechanical properties and to prevent gravitational sedimentation of the dispersed components. Understanding the mechanical stability of such colloidal gels is thus of crucial importance to predict and control the properties of many soft solids. Once a colloidal gel forms, the heterogeneous structure bonded through weak physical interactions, is immediately subject to body forces, such as gravity, surface forces, such as adhesion to a container walls and shear forces; the interplay of these forces acting on the gel determines its stability. Even in the absence of external stresses, colloidal gels undergo internal rearrangements within the network that may cause the network structure to evolve gradually, in processes known as aging or coarsening or fail catastrophically, in a mechanical instability known as syneresis. Studying gel stability in the laboratory requires model colloidal system which may be tuned to eliminate these body or endogenous forces systematically. Using existing chemistry, I developed several systems to study delayed yielding by eliminating gravitational stresses through density matching and cyclic heating to induce attraction; and to study syneresis by eliminating adhesion to the container walls, altering the contact forces between colloids, and again, inducing gelation through heating. These results elucidate the varied yet concomitant mechanisms by which colloidal gels may locally or globally yield, but then reform due to the nature of the physical, or non-covalent, interactions which form

  19. Polyoxometalate-based Supramolecular Gel

    PubMed Central

    He, Peilei; Xu, Biao; Liu, Huiling; He, Su; Saleem, Faisal; Wang, Xun

    2013-01-01

    Self-assemblyings of surfactant-encapsulated Wells-Dawson polyoxometalates (SEPs) nanobuilding blocks in butanone and esters yielded supramolecular gels showing thermo and photo responsive properties. The gels can be further polymerized if unsaturated esters were used and subsequently electrospinned into nanowires and non-woven mats. The as-prepared non-woven mats have a Young's modulus as high as 542.55 MPa. It is believed that this supramolecular gel is a good platform for polyoxometalates processing. PMID:23666013

  20. Adhesive, elastomeric gel impregnating composition

    DOEpatents

    Shaw, David Glenn; Pollard, John Randolph; Brooks, Robert Aubrey

    2002-01-01

    An improved capacitor roll with alternating film and foil layers is impregnated with an adhesive, elastomeric gel composition. The gel composition is a blend of a plasticizer, a polyol, a maleic anhydride that reacts with the polyol to form a polyester, and a catalyst for the reaction. The impregnant composition is introduced to the film and foil layers while still in a liquid form and then pressure is applied to aid with impregnation. The impregnant composition is cured to form the adhesive, elastomeric gel. Pressure is maintained during curing.

  1. Precipitation hardening austenitic superalloys

    DOEpatents

    Korenko, Michael K.

    1985-01-01

    Precipitation hardening, austenitic type superalloys are described. These alloys contain 0.5 to 1.5 weight percent silicon in combination with about 0.05 to 0.5 weight percent of a post irradiation ductility enhancing agent selected from the group of hafnium, yttrium, lanthanum and scandium, alone or in combination with each other. In addition, when hafnium or yttrium are selected, reductions in irradiation induced swelling have been noted.

  2. [An oropharyngeal tularemia case diagnosed by the isolation of Francisella tularensis on human blood agar].

    PubMed

    Ozel, Gönül; Arslan, Ilker Burak; Yeşilyurt, Murat; Celebi, Bekir; Kılıç, Selçuk

    2010-10-01

    Tularemia which is a multisystem disease of humans and some animals, is endemic in North America, some parts of Europe and Asia. The causative agent, Francisella tularensis, is a fastidious gram-negative, intracellular bacterium which requires supplementation with sulphydryl compounds (cysteine, cystine, thiosulphate, isoVitaleX) for growth on common laboratory media. In this report, a case of oropharyngeal tularemia diagnosed by the isolation of the causative agent on non-selective-common microbiological agar, has been presented. The patient was from Yozgat located in central Anatolia where tularemia has not been reported so far. Forty-two years old male was admitted to the hospital with two weeks history of sudden onset fever, headache, generalized aches, sore throat, and cervical tender lump on the left. Physical examination revealed bilateral exudative tonsillitis and tender posterior cervical lymphadenopathy. He has been empirically treated with amoxicilin-clavulanic acid for 7 days with initial diagnosis of acute tonsillopharyngitis. However, he was admitted to the hospital since the symptoms persisted and swelling increased despite antibiotic therapy. Microscopical examination of the Gram and Ehrlich-Ziehl-Neelsen stained smears prepared from the surgically drained lymph node revealed PMNL, with no evidence of bacteria. Routine cultures of the lymph node material yielded growth of gram-negative coccobacilli only on human blood agar and the cultures were negative for pyogenic bacteria, acid-fast organisms and fungi. Pathologic examination of the drainage material revealed suppurative inflammation. Lymph node aspirate and serum samples of the patient together with the isolated strain were sent to reference laboratory for further investigation in accordance to the clinical and laboratory findings compatible with tularemia. The isolate was confirmed as F.tularensis by slide agglutination and direct immunofluorescence antibody tests, and identified as F

  3. Dynamics of a DNA Gel

    NASA Astrophysics Data System (ADS)

    Adhikari, Ramesh; Bhattacharya, Aniket; Dogariu, Aristide

    We study in silico the properties of a gel consisting of DNA strands (modeled as semi-flexible chains) and linkers of varying flexibility, length, and topology. These linkers are envisioned and modeled as active components with additional attributes so as to mimic properties of a synthetic DNA gel containing motor proteins. We use Brownian dynamics to directly obtain frequency dependent complex shear moduli of the gel. We further carry out force spectroscopy on these computer generated gels and study the relaxation properties as a function of the important parameters of the model, e.g., densities and relative ratios of the DNAs and the linkers, the average life time of a link, etc. Our studies are relevant for designing synthetic bio-materials for both materials and medical applications.

  4. Multi-chamber electroosmosis using textile reinforced agar membranes--A promising concept for the future of hemodialysis.

    PubMed

    Kofler, Markus; Lenninger, Margit; Mayer, Gert; Neuwirt, Hannes; Grimm, Michael; Bechtold, Thomas

    2016-01-20

    Renal replacement therapy options are limited to hemodialysis and peritoneal dialysis (70% of US patients) or renal transplantation. Diffusion processes are the main physico-chemical principle behind hemodialysis. An alternative way to achieve liquid flow through membranes bases on the electroosmotic flow which is observed as electrokinetic phenomenon in porous membranes which bear surface charges. Agar consists of the non-ionic agarose and the negatively charged agaropectine thus an electroosmotic flux is observed in analytical electrophoresis. In this study the potential electroosmosis on textile reinforced agar membranes as separation method was investigated. Using a five-chamber electrolysis cell and an agar membrane/cellulose fabric composite an intensive electroosmotic flow of 1-2 ml cm(2) h(-1) at 100 mA cell current could be observed. The movement of cations in the negatively charged agar structure led to an intensive electroosmotic flux, which also transported uncharged molecules such as urea, glucose through the membrane. Separation of uncharged low molecular weight molecules is determined by the membrane characteristic. The transport of ions (K(+), PO4(3-), creatinine) and uncharged molecules (urea, glucose) in electroosmotic separation experiments was monitored using a pH 5.5 phosphate electrolyte with the aim to assess the overall transport processes in the electrochemical cell. The results demonstrate the potential of the method for filtration of biological fluids in the absence of external pressure or high shear rates. PMID:26572331

  5. Campylobacter in broiler slaughter samples assessed by direct count on mCCDA and Campy-Cefex agar.

    PubMed

    Gonsalves, Camila Cristina; Borsoi, Anderlise; Perdoncini, Gustavo; Rodrigues, Laura Beatriz; do Nascimento, Vladimir Pinheiro

    2016-01-01

    Campylobacter spp. cause foodborne illnesses in humans primarily through the consumption of contaminated chicken. The aim of this study was to evaluate the United States Department of Agriculture's (USDA) recommended methodology, protocol MLG 41.02, for the isolation, identification and direct plate counting of Campylobacter jejuni and C. coli samples from the broiler slaughtering process. A plating method using both mCCDA and Campy-Cefex agars is recommended to recover Campylobacter cells. It is also possible to use this method in different matrices (cloacal swabs and water samples). Cloacal swabs, samples from pre-chiller and post-chiller carcasses and samples of pre-chiller, chiller and direct supply water were collected each week for four weeks from the same flock at a slaughterhouse located in an abattoir in southern Brazil. Samples were analyzed to directly count Campylobacter spp., and the results showed a high frequency of Campylobacter spp. on Campy-Cefex agar. For the isolated species, 72% were identified as Campylobacter jejuni and 38% as Campylobacter coli. It was possible to count Campylobacter jejuni and Campylobacter coli from different samples, including the water supply samples, using the two-agar method. These results suggest that slaughterhouses can use direct counting methods with both agars and different matrices as a monitoring tool to assess the presence of Campylobacter bacteria in their products. PMID:27237112

  6. Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the present paper, we test the suitability of Choline-Cl/urea (DES-U) and Choline-Cl/glycerol (DES-G) eutectic mixtures at 1:2 molar ratios for the production of agar biodegradable films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and s...

  7. Controlled evaluation of the agar-slide and radiometric blood culture systems for the detection of bacteremia and fungemia.

    PubMed Central

    Weinstein, M P; Reller, L B; Mirrett, S; Stratton, C W; Reimer, L G; Wang, W L

    1986-01-01

    A commercially available agar-slide blood culture bottle (Septi-Chek; Roche Diagnostics, Div. Hoffman-La Roche, Inc., Nutley, N.J.) was compared with the radiometric blood culture system (BACTEC; Johnston Laboratories, Inc., Towson, Md.) in 8,544 paired blood cultures from adult patients. The systems were inoculated with equal volumes (10 ml) of blood. Overall, there was no statistically significant difference between the two systems in the recovery of clinically important microorganisms, but significantly more members of the family Enterobacteriaceae other than Escherichia coli were detected by the agar-slide system (P less than 0.005). The agar-slide system detected more fungi, and the BACTEC detected more anaerobic bacteria; however, small numbers of recovered organisms precluded statistical significance. When microorganisms grew in both systems, their presence was detected one or more days earlier in the BACTEC (P less than 0.001). More contaminants grew in the agar-slide system (P less than 0.001). Both systems performed well, and either system should provide high yield and prompt detection of positive blood cultures in patients with bacteremia and fungemia if used in an optimal way as recommended by the respective manufacturers. PMID:3517047

  8. Effects of immersion disinfection of agar-alginate combined impressions on the surface properties of stone casts.

    PubMed

    Iwasaki, Yukiko; Hiraguchi, Hisako; Iwasaki, Eriko; Yoneyama, Takayuki

    2016-01-01

    This study investigated the effects of disinfection of agar-alginate combined impressions on the surface properties of the resulting stone casts. Two brands of cartridge-form agar impression material and one alginate impression material were used. Agar-alginate combined impressions of smooth glass plates were prepared. The impressions were immersed in 0.55% ortho-phthalaldehyde solution or 0.5% sodium hypochlorite solution for 1, 3, 5 and 10 min. A stone cast made with an impression that had not been immersed was prepared as a control. The surface roughness (Ra) of the stone casts was measured, and the cast surfaces were observed by SEM. Immersion of agar-alginate combined impressions in 0.5% sodium hypochlorite solution for up to 10 min had no serious adverse effects on the surface properties of the stone casts. In contrast, even 1 min of immersion in 0.55% ortho-phthalaldehyde solution caused deterioration of the cast surface properties. PMID:26843442

  9. Utilization of the Soft Agar Colony Formation Assay to Identify Inhibitors of Tumorigenicity in Breast Cancer Cells.

    PubMed

    Horibata, Sachi; Vo, Tommy V; Subramanian, Venkataraman; Thompson, Paul R; Coonrod, Scott A

    2015-01-01

    Given the inherent difficulties in investigating the mechanisms of tumor progression in vivo, cell-based assays such as the soft agar colony formation assay (hereafter called soft agar assay), which measures the ability of cells to proliferate in semi-solid matrices, remain a hallmark of cancer research. A key advantage of this technique over conventional 2D monolayer or 3D spheroid cell culture assays is the close mimicry of the 3D cellular environment to that seen in vivo. Importantly, the soft agar assay also provides an ideal tool to rigorously test the effects of novel compounds or treatment conditions on cell proliferation and migration. Additionally, this assay enables the quantitative assessment of cell transformation potential within the context of genetic perturbations. We recently identified peptidylarginine deiminase 2 (PADI2) as a potential breast cancer biomarker and therapeutic target. Here we highlight the utility of the soft agar assay for preclinical anti-cancer studies by testing the effects of the PADI inhibitor, BB-Cl-amidine (BB-CLA), on the tumorigenicity of human ductal carcinoma in situ (MCF10DCIS) cells. PMID:26067809

  10. Hydrogen-bond-mediated in situ fabrication of AgNPs/agar/PAN electrospun nanofibers as reproducible SERS substrates.

    PubMed

    Yang, Tong; Yang, Hui; Zhen, Shu Jun; Huang, Cheng Zhi

    2015-01-28

    Reproducibility in surface enhanced Raman scattering (SERS) measurements is a challenge. This work developed a facile way to make highly dispersed uniform silver nanoparticles (AgNPs) loaded in the agar/polyacrylonitrile (PAN) nanofibers by the coupling the electrospinning technology from metal complex-containing polymer solution and in situ photoreductive technique. Agar, as hydrophilic component, was introduced into the electrospinning solution considering that its abundant hydroxyl group sites could greatly improve the contents of silver ions in the polymers because of the rich silver ion chelated with the hydroxyl group, whereas hydrophilic agar was integrated with hydrophobic PAN by -OH···N≡C- hydrogen bonds as a bridge. Meanwhile, the in situ photoreductive reaction was made under different light irradiations such as desk lamp, 365 nm UV-lamp, and 254 nm UV-lamp. High yield of stable AgNPs with highly uniform and dispersion are available in the agar/PAN nanofibers after the in situ photoreductive reaction, supplying the possibility of reproducible SERS signals. To identify that concept of proof, a facile approach for the determination of malachite green (MG) in three environmental practical samples was demonstrated by using the composite nanofibrous material irradiated by 365 nm UV-lamp, giving the minimum detection concentration of MG as low as 0.1 μmol/L with a good linear response ranging from 0.1-100 μmol/L (R(2) = 0.9960). PMID:25546719

  11. Cell-on-hydrogel platform made of agar and alginate for rapid, low-cost, multidimensional test of antimicrobial susceptibility.

    PubMed

    Sun, Han; Liu, Zhengzhi; Hu, Chong; Ren, Kangning

    2016-08-01

    Antimicrobial resistance (AMR) is a rapidly increasing threat to the effective treatment of infectious diseases worldwide. The two major remedies include: (1) using narrow-spectrum antibiotics based on rapid diagnosis; and (2) developing new antibiotics. A key part of both remedies is the antimicrobial susceptibility test (AST). However, the current standard ASTs that monitor colony formation are costly and time-consuming and the new strategies proposed are not yet practical to be implemented. Herein, we report a strategy to fabricate whole-hydrogel microfluidic chips using alginate-doped agar. This agar-based microfabrication makes it possible to prepare inexpensive hydrogel devices, and allows a seamless link between microfluidics and conventional agar-based cell culture. Different from common microfluidic systems, in our system the cells are cultured on top of the device, similar to normal agar plate culture; on the other hand, the microfluidic channels inside the hydrogel allow precise generation of linear gradient of drugs, thus giving a better performance than the conventional disk diffusion method. Cells in this system are not exposed to any shear flow, which allows the reliable tracking of individual cells and AST results to be obtained within 2-3 hours. Furthermore, our system could test the synergistic effect of drugs through two-dimensional gradient generation. Finally, the platform could be directly implemented to new drug discovery and other applications wherein a fast, cost-efficient method for studying the response of microorganisms upon drug administration is desirable. PMID:27452345

  12. TOPICAL REVIEW: Polymer gel dosimetry

    NASA Astrophysics Data System (ADS)

    Baldock, C.; De Deene, Y.; Doran, S.; Ibbott, G.; Jirasek, A.; Lepage, M.; McAuley, K. B.; Oldham, M.; Schreiner, L. J.

    2010-03-01

    Polymer gel dosimeters are fabricated from radiation sensitive chemicals which, upon irradiation, polymerize as a function of the absorbed radiation dose. These gel dosimeters, with the capacity to uniquely record the radiation dose distribution in three-dimensions (3D), have specific advantages when compared to one-dimensional dosimeters, such as ion chambers, and two-dimensional dosimeters, such as film. These advantages are particularly significant in dosimetry situations where steep dose gradients exist such as in intensity-modulated radiation therapy (IMRT) and stereotactic radiosurgery. Polymer gel dosimeters also have specific advantages for brachytherapy dosimetry. Potential dosimetry applications include those for low-energy x-rays, high-linear energy transfer (LET) and proton therapy, radionuclide and boron capture neutron therapy dosimetries. These 3D dosimeters are radiologically soft-tissue equivalent with properties that may be modified depending on the application. The 3D radiation dose distribution in polymer gel dosimeters may be imaged using magnetic resonance imaging (MRI), optical-computerized tomography (optical-CT), x-ray CT or ultrasound. The fundamental science underpinning polymer gel dosimetry is reviewed along with the various evaluation techniques. Clinical dosimetry applications of polymer gel dosimetry are also presented.

  13. Topical Review: Polymer gel dosimetry

    PubMed Central

    Baldock, C; De Deene, Y; Doran, S; Ibbott, G; Jirasek, A; Lepage, M; McAuley, K B; Oldham, M; Schreiner, L J

    2010-01-01

    Polymer gel dosimeters are fabricated from radiation sensitive chemicals which, upon irradiation, polymerize as a function of the absorbed radiation dose. These gel dosimeters, with the capacity to uniquely record the radiation dose distribution in three-dimensions (3D), have specific advantages when compared to one-dimensional dosimeters, such as ion chambers, and two-dimensional dosimeters, such as film. These advantages are particularly significant in dosimetry situations where steep dose gradients exist such as in intensity-modulated radiation therapy (IMRT) and stereotactic radiosurgery. Polymer gel dosimeters also have specific advantages for brachytherapy dosimetry. Potential dosimetry applications include those for low-energy x-rays, high-linear energy transfer (LET) and proton therapy, radionuclide and boron capture neutron therapy dosimetries. These 3D dosimeters are radiologically soft-tissue equivalent with properties that may be modified depending on the application. The 3D radiation dose distribution in polymer gel dosimeters may be imaged using magnetic resonance imaging (MRI), optical-computerized tomography (optical-CT), x-ray CT or ultrasound. The fundamental science underpinning polymer gel dosimetry is reviewed along with the various evaluation techniques. Clinical dosimetry applications of polymer gel dosimetry are also presented. PMID:20150687

  14. Precipitation Indices Low Countries

    NASA Astrophysics Data System (ADS)

    van Engelen, A. F. V.; Ynsen, F.; Buisman, J.; van der Schrier, G.

    2009-09-01

    Since 1995, KNMI published a series of books(1), presenting an annual reconstruction of weather and climate in the Low Countries, covering the period AD 763-present, or roughly, the last millennium. The reconstructions are based on the interpretation of documentary sources predominantly and comparison with other proxies and instrumental observations. The series also comprises a number of classifications. Amongst them annual classifications for winter and summer temperature and for winter and summer dryness-wetness. The classification of temperature have been reworked into peer reviewed (2) series (AD 1000-present) of seasonal temperatures and temperature indices, the so called LCT (Low Countries Temperature) series, now incorporated in the Millennium databases. Recently we started a study to convert the dryness-wetness classifications into a series of precipitation; the so called LCP (Low Countries Precipitation) series. A brief outline is given here of the applied methodology and preliminary results. The WMO definition for meteorological drought has been followed being that a period is called wet respectively dry when the amount of precipitation is considerable more respectively less than usual (normal). To gain a more quantitative insight for four locations, geographically spread over the Low Countries area (De Bilt, Vlissingen, Maastricht and Uccle), we analysed the statistics of daily precipitation series, covering the period 1900-present. This brought us to the following definition, valid for the Low Countries: A period is considered as (very) dry respectively (very) wet if over a continuous period of at least 60 days (~two months) cq 90 days (~three months) on at least two out of the four locations 50% less resp. 50% more than the normal amount for the location (based on the 1961-1990 normal period) has been measured. This results into the following classification into five drought classes hat could be applied to non instrumental observations: Very wet period

  15. [Variations in hyperbilirrubinemia in low birth weight newborns under phototherapy and continous or discontinous agar oral administration (author's transl)].

    PubMed

    Colomer, J; Moya, M; Marco, V; De Paredes, C; Escrivá, F; Vila, R

    1975-06-01

    Therapeutic attitude in hyperbilirrubinemia is always worth because other infrequent complications but not for this, less important. Phototherapy innocuousness, largely demonstrated, fosters its profilactic use at beginning and not only for those babies with serum bilirrubin over 10 mg % in the first day of life. Previously we have reported positive results with agar oral administration without collateral effects. On this grounds we have planned the following experience in a homogenous group of L.B.W.: one group was fed with agar previously to each formula administration; other group received the same amount of agar but divided in only three administrations in 24 hours; the last group received continuous phototherapy for 96 hours with a white cold fluorescent light from a source of 8-Vita-lite lamp of 40 watts with a intensity of 500 foot candle and 30 lumens. All of these babies weighed less than 2.500 g. and were between 10 and 90 percentil of Lubschenko diagram. They were fed with the same formula and same time table with no infusions, rejecting all that presented any type of pathology. Obstetric conditions were basically identical. This population was randomly divided in four groups. 1) Control group with no profilaxis, but with identical bilirrubin andhematocrit determinations. 2) Group with continuous agar oral administration, 125 mg. before each of the seven formula feeding. 3) Group with discontinuous agar administration, 250 mg. before three of the seven formula feeding. 4) Group with continuous phototherapy for 96 hours. These is initial identification of the groups with statistic signification, and after that a quantitative and sequential evolution of bilirrubin is analized in each group. PMID:1155873

  16. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria)

    NASA Astrophysics Data System (ADS)

    Kupka, Teobald; Wieczorek, Piotr P.

    2016-01-01

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of 1H and 13C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs.

  17. Fungistatic activity of flaxseed in potato dextrose agar and a fresh noodle system.

    PubMed

    Xu, Yingying; Hall, Clifford; Wolf-Hall, Charlene; Manthey, Frank

    2008-02-10

    Although numerous researchers have studied flaxseed as a food ingredient for its health benefits, flaxseed (Linum usitatissimum) has never been considered as a food preservative. The objective of this study was to investigate the effect of flaxseed flour (FF) concentration (0, 6, 9, 12, and 15% wt/wt), cultivar ('Omega' and brown) and source (four seed companies located in Minnesota and North Dakota) on flaxseed fungistatic activity. Fungal radial growth was used to assess the fungistatic activity of FF in both potato dextrose agar (PDA) medium and a fresh noodle system. Strains of Penicillium chrysogenum, Aspergillus flavus, Fusarium graminearum, and a Penicillium sp. isolated from molded noodles were used as the test microorganisms. Results showed that growth of F. graminearum was completely inhibited at all FF concentrations in PDA, and the inhibition of the other three test microorganisms increased with increasing FF concentrations. In the model noodle system, FF concentration at 9% or higher significantly reduced the mold count of fresh noodle during storage. In the inoculated noodle system, 6% FF addition was sufficient to significantly inhibit the growth of F. graminearum and A. flavus, whereas 9% FF concentrations showed fungistatic activity against P. chrysogenum and the Penicillium sp. isolate. Differences in the degree of mold inhibition were found among FFs obtained from different sources and cultivars. Results suggested that flaxseed possesses fungistatic activity and could be used as a multifunctional food ingredient. PMID:18077042

  18. Susceptibilities of genital mycoplasmas to the newer quinolones as determined by the agar dilution method.

    PubMed Central

    Kenny, G E; Hooton, T M; Roberts, M C; Cartwright, F D; Hoyt, J

    1989-01-01

    The increasing resistance of genital mycoplasmas to tetracycline poses a problem because tetracycline is one of the few antimicrobial agents active against Mycoplasma hominis, Ureaplasma urealyticum, chlamydiae, gonococci, and other agents of genitourinary-tract disease. Since the quinolones are a promising group of antimicrobial agents, the susceptibilities of M. hominis and U. urealyticum to the newer 6-fluoroquinolones were determined by the agar dilution method. Ciprofloxacin, difloxacin, and ofloxacin had good activity against M. hominis, with the MIC for 50% of isolates tested (MIC50) being 1 microgram/ml. Fleroxacin, lomefloxacin, pefloxacin, and rosoxacin had MIC50s of 2 micrograms/ml. Enoxacin, norfloxacin, and amifloxacin had MIC50s of 8 to 16 micrograms/ml, and cinoxacin and nalidixic acid were inactive (MIC50, greater than or equal to 256 micrograms/ml). Overall, the activities of 6-fluoroquinolones for ureaplasmas were similar to those for M. hominis, with MICs being the same or twofold greater. The most active 6-fluoroquinolones against ureaplasmas were difloxacin, ofloxacin, and pefloxacin, with MIC50s of 1 to 2 micrograms/ml. Ciprofloxacin was unusual in that the MIC50 for M. hominis was 1 microgram/ml, whereas the MIC50 for ureaplasmas was 8 micrograms/ml. Since the MIC50s for the most active quinolones approximate achievable concentrations in blood and urine, quinolones have promise in treating mycoplasmal infections. PMID:2712541

  19. National Committee for Clinical Laboratory Standards agar dilution susceptibility testing of anaerobic gram-negative bacteria.

    PubMed Central

    Brown, W J

    1988-01-01

    One hundred nine recent clinical isolates of anaerobic gram-negative bacteria were tested in triplicate by the National Committee for Clinical Laboratory Standards agar dilution procedure for their susceptibility to 32 antimicrobial agents. All isolates were inhibited by imipenem, but there were significant numbers of strains resistant to other beta-lactam drugs, and therefore the in vitro response to these antimicrobial agents cannot be predicted. This was particularly true for the bile-resistant or Bacteroides fragilis group. beta-Lactamase production was detected in 82% of the bacteroides with the nitrocefin test. Clavulanic acid combined with amoxicillin and ticarcillin and sulbactam combined with ampicillin resulted in synergistic activity against all beta-lactamase-positive organisms. Ceftizoxime was the most active of the cephalosporins. Two percent of the isolates were resistant to chloramphenicol and metronidazole. Clindamycin resistance was detected in 38% of the B. fragilis group, which is a marked increase from the 4% detected 10 years ago at this institution. PMID:3364956

  20. Theoretical and experimental NMR studies on muscimol from fly agaric mushroom (Amanita muscaria).

    PubMed

    Kupka, Teobald; Wieczorek, Piotr P

    2016-01-15

    In this article we report results of combined theoretical and experimental NMR studies on muscimol, the bioactive alkaloid from fly agaric mushroom (Amanita muscaria). The assignment of (1)H and (13)C NMR spectra of muscimol in DMSO-d6 was supported by additional two-dimensional heteronuclear correlated spectra (2D NMR) and gauge independent atomic orbital (GIAO) NMR calculations using density functional theory (DFT). The effect of solvent in theoretical calculations was included via polarized continuum model (PCM) and the hybrid three-parameter B3LYP density functional in combination with 6-311++G(3df,2pd) basis set enabled calculation of reliable structures of non-ionized (neutral) molecule and its NH and zwitterionic forms in the gas phase, chloroform, DMSO and water. GIAO NMR calculations, using equilibrium and rovibrationally averaged geometry, at B3LYP/6-31G* and B3LYP/aug-cc-pVTZ-J levels of theory provided muscimol nuclear magnetic shieldings. The theoretical proton and carbon chemical shifts were critically compared with experimental NMR spectra measured in DMSO. Our results provide useful information on its structure in solution. We believe that such data could improve the understanding of basic features of muscimol at atomistic level and provide another tool in studies related to GABA analogs. PMID:26312739

  1. Mercury and its bioconcentration factors in fly agaric (Amanita muscaria) from spatially distant sites in Poland.

    PubMed

    Falandysz, J; Lipka, K; Mazur, A

    2007-09-01

    Total mercury content has been determined in the fruiting bodies of fly agaric (Amanita muscaria) and topsoil layer (0-10 cm) collected from 14 spatially distant sites across Poland. Mercury was measured by cold-vapor atomic absorption spectroscopy (CV-AAS) after nitric acid (mushrooms) or nitric acid and sulfuric acid (soil) digestion of the samples. The caps, depending on the site, contained total mercury at mean concentrations from 0.24+/-0.13 to 1.4+/-0.6 microg/g dm (median 0.19-1.4 microg/g dm), and stalks from 0.18+/-0.06 to 0.71+/-0.26 microg/g dm (median 0.18-0.67 microg/g dm). An overall-mean the total mercury content for 204 caps and stalks was, respectively, 0.73+/-0.55 (0.05-3.3 microg/g dm) and 0.43+/-0.33 (0.09-2.3 microg/g dm). PMID:17849304

  2. Comparison of CHROMagar Salmonella Medium and Hektoen Enteric Agar for Isolation of Salmonellae from Stool Samples

    PubMed Central

    Gaillot, Olivier; Di Camillo, Patrick; Berche, Patrick; Courcol, René; Savage, Colette

    1999-01-01

    CHROMagar Salmonella (CAS), a new chromogenic medium, was retrospectively compared to Hektoen enteric agar (HEA) with 501 Salmonella stock isolates and was then prospectively compared to HEA for the detection and presumptive identification of Salmonella spp. with 508 stool samples before and after enrichment. All stock cultures (100%), including cultures of H2S-negative isolates, yielded typical mauve colonies on CAS, while 497 (99%) isolates produced typical lactose-negative, black-centered colonies on HEA. Following overnight incubation at 37°C, a total of 20 Salmonella strains were isolated from the 508 clinical samples. Sensitivities for primary plating and after enrichment were 95% (19 isolates) and 100% (20 isolates), respectively, for CAS and 80% (16 isolates) and 100% (20 isolates), respectively, for HEA. The specificity of CAS (88.9%) was significantly higher than that of HEA (78.5%; P < 0.0001). On the basis of its good sensitivity and specificity, CAS medium can be recommended for use for primary plating when human stool samples are screened for Salmonella spp. PMID:9986847

  3. Chemosensitivity measurements of human tumour cells by soft agar assays are influenced by the culture conditions.

    PubMed Central

    Endresen, L.; Tveit, K. M.; Rugstad, H. E.; Pihl, A.

    1985-01-01

    To investigate the influence of culture conditions on the in vitro responses of tumour cells to anticancer drugs, the sensitivities observed with the soft agar methods of Hamburger & Salmon (1977) (H-S) and of Courtenay & Mills (1978) (C-M) were compared. In all cases the ID50 values were determined from dose-response curves. Six human tumour cell lines exposed to 10 different agents, and 9 patients' melanomas exposed to 5 different agents, were examined. In the studies of cell lines the H-S method gave higher sensitivity values than the C-M method in 38 out of 52 cases, whereas in 14 cases the results were the same. In the patients' tumours the H-S method gave higher sensitivity in 21 of 35 cases, equal sensitivity in 11, and lower sensitivity in 3 cases. In many instances the ID50 values obtained with the two test systems differed by factors of 10 or more, both in the case of cell lines and tumour specimens. Systematic alterations in the culture conditions indicated that the presence or absence of rat erythrocytes is the most important factor responsible for the differences observed. Also, other factors, such as supplements (in the H-S method) and the use of different serum types, appeared to influence both colony growth and chemosensitivity. PMID:4005141

  4. Studies on the inactivation of medically important Candida species on agar surfaces using pulsed light.

    PubMed

    Farrell, Hugh; Garvey, Mary; Rowan, Neil

    2009-09-01

    Development of a pulsed-light (PL) approach to inanimate surface decontamination is timely, as the incidence of yeast-related infections in healthcare remains unacceptably high. Critical electrical and biological factors governing the efficacy of PL for the in vitro inactivation of medically important yeast were established in this study. Predetermined cell numbers of yeast were inoculated separately on agar plates and were flashed with < or =90 pulses of broad-spectrum light under varying operating conditions, and their inactivation was measured. Significant differences in inactivation among different yeasts occurred depending on the intensity of the applied lamp discharge energy and the amount of pulsing applied. Levels of yeast sensitivity also varied depending on the distance between the light source and the treatment surface used, and the population size, type and age of cultures treated. Yeast strains were shown to be significantly more resistant to PL irradiation compared with similarly treated bacterial control cultures. A clear relationship was observed between the concentration of eluted proteins from treated yeast and the severity of PL conditions, with scanning electron micrographs showing irreversible cellular damage. Therefore, the findings from this study will enable further development and optimization of PL as a method of decontaminating surfaces in healthcare setting. PMID:19624750

  5. Separation of soluble Brucella antigens by gel-filtration chromatography.

    PubMed

    McGhee, J R; Freeman, B A

    1970-07-01

    Soluble precipitating antigens of Brucella suis have been, in various degrees, purified by filtration on Sephadex gels. The most useful gels employed were Sephadex G-150, Sephadex G-200, and Sepharose 4B. Although not all fractions proved to be immunologically pure, some crude molecular-size estimates of most of the 13 soluble antigens of the Brucella cell could be given. In addition, monospecific antisera to three purified Brucella antigens have been prepared. By using purified preparations, physical and chemical data were obtained on two major antigens, E and 1, and a minor antigen, f. Antigen E is not an agglutinogen and may be toxic. Antigen 1 is of low molecular weight and is neither toxic nor agglutinogenic. The minor antigen f is an agglutinogen as well as a precipitinogen and is found on the cell surface. Both major antigens, when purified, were immunogenic in rabbits. PMID:16557798

  6. Alternative imaging modalities for polymer gel dosimetry

    NASA Astrophysics Data System (ADS)

    Jirasek, Andrew

    2010-11-01

    This review summarizes recent work in the area of imaging polymer gel dosimeters using x-ray CT imaging, ultrasound, and radiation-induced changes in gel mechanical properties. In addition, recent work in the area of Raman tomographic imaging of canine bone, in conjunction with past efforts in Raman imaging of polymer gel dosimeters, raises new possibilities for new polymer gel imaging techniques.

  7. Rheological behavior of Slide Ring Gels.

    NASA Astrophysics Data System (ADS)

    Sharma, Vivek; Park, Jong Seung; Park, Jung O.; Srinivasarao, Mohan

    2006-03-01

    Slide ring gels were synthesized by chemically crosslinking, sparsely populated α-cyclodextrin (α-CD) present on the polyrotaxanes consisting of α-CD and polyethylene glycol (PEG). [1] Unlike physically or chemically crosslinked gels, slide ring gels are topological gels where crosslinks can slide along the chain. [2] We investigate the rheological behavior of these gels swollen in water and compare their viscoelastic properties to those of physical and chemical gels. We also study the equilibrium swelling behavior of these gels. [1] Okumura and Ito, Adv. Mater. 2001, 13, 485 [2] C. Zhao et al, J. Phys. Cond. Mat. 2005, 17, S2841

  8. Chitosan gel-embedded moxifloxacin niosomes: An efficient antimicrobial hybrid system for burn infection.

    PubMed

    Sohrabi, Shohreh; Haeri, Azadeh; Mahboubi, Arash; Mortazavi, Alireza; Dadashzadeh, Simin

    2016-04-01

    The purpose of this study was to prepare and characterize a hybrid system of moxifloxacin loaded niosomes incorporated into chitosan gel as a potential carrier for topical antimicrobial delivery. The prepared system was characterized regarding entrapment efficiency, particle size, zeta potential, in vitro drug release kinetics, morphology, FTIR analysis, bioadhesive strength and rheological behavior. The effect of different formulation parameters (surfactant type, surfactant to drug ratio, cholesterol percentage and loading methodology) on moxifloxacin entrapment and drug release was evaluated. The antibacterial effectiveness of various formulations was also assessed by measuring the minimal inhibitory concentrations, minimal bactericidal concentrations and agar diffusion assay using Pseudomonas aeruginosa and Staphylococcus aureus as model pathogens. The optimized niosomal formulation showed 73% drug entrapment, 47% drug release in 8h and was ∼290 nm in particle diameter and negatively charged (ζ∼-23 mV). The gel-embedded niosomes exhibited pseudo-plastic flow behavior and more sustained drug release profile compared to niosomes. The niosomal formulation of moxifloxacin was the most efficient system against P. aeruginosa, while gel based formulations were superior against S. aureus. Taken together, moxifloxacin-in-niosomes-in-gels hold great promise for topical microbial infections. PMID:26794314

  9. DISSOLUTION OF LANTHANUM FLUORIDE PRECIPITATES

    DOEpatents

    Fries, B.A.

    1959-11-10

    A plutonium separatory ore concentration procedure involving the use of a fluoride type of carrier is presented. An improvement is given in the derivation step in the process for plutonium recovery by carrier precipitation of plutonium values from solution with a lanthanum fluoride carrier precipitate and subsequent derivation from the resulting plutonium bearing carrier precipitate of an aqueous acidic plutonium-containing solution. The carrier precipitate is contacted with a concentrated aqueous solution of potassium carbonate to effect dissolution therein of at least a part of the precipitate, including the plutonium values. Any remaining precipitate is separated from the resulting solution and dissolves in an aqueous solution containing at least 20% by weight of potassium carbonate. The reacting solutions are combined, and an alkali metal hydroxide added to a concentration of at least 2N to precipitate lanthanum hydroxide concomitantly carrying plutonium values.

  10. Diversity and dynamics of antibiotic-resistant bacteria in cheese as determined by PCR denaturing gradient gel electrophoresis.

    PubMed

    Flórez, Ana Belén; Mayo, Baltasar

    2015-12-01

    This work reports the composition and succession of tetracycline- and erythromycin-resistant bacterial communities in a model cheese, monitored by polymerase chain reaction denaturing gradient gel electrophoresis (PCR-DGGE). Bacterial 16S rRNA genes were examined using this technique to detect structural changes in the cheese microbiota over manufacturing and ripening. Total bacterial genomic DNA, used as a template, was extracted from cultivable bacteria grown without and with tetracycline or erythromycin (both at 25 μg ml(-1)) on a non-selective medium used for enumeration of total and viable cells (Plate Count agar with Milk; PCA-M), and from those grown on selective and/or differential agar media used for counting various bacterial groups; i.e., lactic acid bacteria (de Man, Rogosa and Sharpe agar; MRSA), micrococci and staphylococci (Baird-Parker agar; BPA), and enterobacteria (Violet Red Bile Glucose agar; VRBGA). Large numbers of tetracycline- and erythromycin-resistant bacteria were detected in cheese samples at all stages of ripening. Counts of antibiotic-resistant bacteria varied widely depending on the microbial group and the point of sampling. In general, resistant bacteria were 0.5-1.0 Log10 units fewer in number than the corresponding susceptible bacteria. The PCR-DGGE profiles obtained with DNA isolated from the plates for total bacteria and the different bacterial groups suggested Escherichia coli, Lactococcus lactis, Enterococcus faecalis and Staphylococcus spp. as the microbial types resistant to both antibiotics tested. This study shows the suitability of the PCR-DGGE technique for rapidly identifying and tracking antibiotic resistant populations in cheese and, by extension, in other foods. PMID:26241491

  11. Mechanical stability analysis of carrageenan-based polymer gel for magnetic resonance imaging liver phantom with lesion particles.

    PubMed

    In, Eunji; Naguib, Hani; Haider, Masoom

    2014-10-01

    Medical imaging is an effective technique used to detect and prevent disease in cancer research. To optimize medical imaging, a calibration medium or phantom with tissue-mimicking properties is required. Although the feasibility of various polymer gel materials has previously been studied, the stability of the gels' properties has not been investigated. In this study, we fabricated carrageenan-based polymer gel to examine the stability of its properties such as density, conductivity, permittivity, elastic modulus, and [Formula: see text] and [Formula: see text] relaxation times over six weeks. We fabricated eight samples with different carrageenan and agar concentrations and found that the density, elastic modulus, and compressive strength fluctuated with no specific pattern. The elastic modulus in sample 4 with 3 wt. % carrageenan and 1.5 wt. % agar fluctuated from 0.51 to 0.64 MPa in five weeks. The [Formula: see text] and [Formula: see text] relaxation times also varied by 23% to 29%. We believe that the fluctuation of these properties is related to the change in water content of the sample due to cycles of water expulsion and absorption in their containers. The fluctuation of the properties should be minimized to achieve accurate calibration over the shelf life of the phantom and to serve as the standard for quality assurance. Furthermore, a full liver phantom with spherical lesion particles was fabricated to demonstrate the potential for phantom production. PMID:26158073

  12. Comparison of Citrated Human Blood, Citrated Sheep Blood, and Defibrinated Sheep Blood Mueller-Hinton Agar Preparations for Antimicrobial Susceptibility Testing of Streptococcus pneumoniae Isolates ▿

    PubMed Central

    Satzke, Catherine; Seduadua, Anna; Chandra, Reginald; Carapetis, Jonathan R.; Mulholland, E. Kim; Russell, Fiona M.

    2010-01-01

    The use of Mueller-Hinton agar supplemented with citrated human or citrated sheep blood was compared with the use of routinely used Mueller-Hinton agar supplemented with defibrinated sheep blood for antimicrobial susceptibility testing of Streptococcus pneumoniae. The alternate supplements were found to be unsatisfactory, particularly for testing resistant isolates, and therefore are not recommended. PMID:20668133

  13. Use of agar diffusion assay to evaluate bactericidal activity of formulations of alkaline salts of fatty acids against bacteria associated with poultry processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The agar diffusion assay was used to examine antibacterial activity of alkaline salts of fatty acids (FA). Wells in agar media seeded with bacteria were filled with FA-potassium hydroxide (KOH) solutions, plates were incubated, and zones of inhibition were measured. The relationship between bacteric...

  14. Thixotropic gel for vadose zone remediation

    DOEpatents

    Riha, Brian D.

    2012-07-03

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  15. Thixotropic gel for vadose zone remediation

    DOEpatents

    Rhia, Brian D.

    2011-03-01

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  16. Thixotropic gel for vadose zone remediation

    DOEpatents

    Riha, Brian D.; Looney, Brian B.

    2015-10-27

    A thixotropic gel suitable for use in subsurface bioremediation is provided along with a process of using the gel. The thixotropic gel provides a non-migrating injectable substrate that can provide below ground barrier properties. In addition, the gel components provide for a favorable environment in which certain contaminants are preferentially sequestered in the gel and subsequently remediated by either indigenous or introduced microorganisms.

  17. The Global Precipitation Climatology Project (GPCP) Combined Precipitation Dataset

    NASA Technical Reports Server (NTRS)

    Huffman, George J.; Adler, Robert F.; Arkin, Philip; Chang, Alfred; Ferraro, Ralph; Gruber, Arnold; Janowiak, John; McNab, Alan; Rudolf, Bruno; Schneider, Udo

    1997-01-01

    The Global Precipitation Climatology Project (GPCP) has released the GPCP Version 1 Combined Precipitation Data Set, a global, monthly precipitation dataset covering the period July 1987 through December 1995. The primary product in the dataset is a merged analysis incorporating precipitation estimates from low-orbit-satellite microwave data, geosynchronous-orbit -satellite infrared data, and rain gauge observations. The dataset also contains the individual input fields, a combination of the microwave and infrared satellite estimates, and error estimates for each field. The data are provided on 2.5 deg x 2.5 deg latitude-longitude global grids. Preliminary analyses show general agreement with prior studies of global precipitation and extends prior studies of El Nino-Southern Oscillation precipitation patterns. At the regional scale there are systematic differences with standard climatologies.

  18. Gel placement in fractured systems

    SciTech Connect

    Seright, R.S.

    1995-11-01

    This paper examines several factors that can have an important effect on gel placement in fractured systems, including gelant viscosity, degree of gelation, and gravity. For an effective gel treatment, the conductivity of the fracture must be reduced and a viable flow path must remain open between the wellbore and mobile oil in the reservoir. During placement, the gelant that``leaks off`` from the fracture into the rock plays an important role in determining how well a gel treatment will reduce channeling. For a given volume of gelant injected the distance of gelant leakoff is greater for a viscous gelant than for a low-viscosity gelant. In one method to minimize gelant leakoff, sufficient gelation is designed to occur before the gelant leaves the wellbore. The authors investigated this approach in numerous experiments with both fractured and unfractured cores. They studied Cr(III)/acetate/hydrolyzed polyacrylamide (HPAM), resorcinol/formaldehyde, Cr(III)/xanthan, aluminum/citrate/HPAM, and other gelants and gels with various delay times between gelant preparation and injection. Their results suggest both hope and caution concerning the injection of gels into fractured systems.

  19. Textural characterization of foxtail millet gels: effect of cations and hydrocolloids.

    PubMed

    Nagaprabha, P; Bhattacharya, Sila

    2016-01-01

    Foxtail millet (Setaria italica) is traditionally cultivated in mainly dry land areas and has nutritional importance. The textural characteristics of gels, formed with foxtail millet flour at different concentrations (9-13 %, dry solid basis) along with selected cations and hydrocolloids, were determined. Different concentrations of monovalent (NaCl) and divalent (CaCl2 and FeSO4) cations, and hydrocolloids such as gelatin, gellan, starch, xanthan and agar were incorporated in gels. The gel forming ability markedly improved with an increase in the concentrations of CaCl2 and FeSO4, while NaCl had a marginal effect. Gels prepared with 11 % of foxtail millet alone were found to sensorially acceptable while addition of 0.5 % CaCl2 or 0.2 % FeSO4 respective with 10 % foxtail millet also resulted in acceptable gels. Among the hydrocolloids, starch and gellan had marked effects on gel formation, and textural and sensory attributes. The principal component analysis (PCA) plot showed that concentration of foxtail millet formed a cluster with sensory hardness, springiness, cohesiveness, and instrumental peak stress, fracture strain and compression energy indicating that these attributes were interrelated to each other. Stickiness and gelling time formed a cluster on the other side of the axis indicating inversely related. Foxtail millet has a good potential for development of new ranges of gelled health benefiting convenience products with nutraceutical property, and the addition of cations helps to achieve acceptable structural integrity. PMID:26787947

  20. In vitro antifungal susceptibility testing of Scopulariopsis brevicaulis strains using agar diffusion method.

    PubMed

    Skóra, Magdalena; Macura, Anna B

    2011-01-01

    The genus Scopulariopsis is a common soil saprotroph and has been isolated from air, organic waste and also from plant, animal and human tissues. Scopulariopsis has mainly been associated in humans with superficial mycoses, but it has also been described as the cause of subcutaneous and invasive infections. The most common aetiological agent of infections in humans is Scopulariopsis brevicaulis. This species has been reported to be resistant in vitro to broad-spectrum antifungal agents available today. The aim of the study was to establish in vitro antifungal susceptibility of 35 S. brevicaulis strains against amphotericin B (AMB), flucytosine (FC), caspofungin (CAS), terbinafine (TER), ciclopirox (CIC), voriconazole (VOR), clotrimazole (CTR), miconazole (MCZ), econazole (ECO), ketoconazole (KET), itraconazole (ITR), and fluconazole (FLU). Antifungal susceptibility tests were evaluated by an agar diffusion method (Neo-Sensitabs, Rosco, Denmark). AMB, FC, CAS, ITR and FLU showed no antifungal activity against S. brevicaulis. TER, CIC, CTR, KET, VOR, ECO, and MCZ revealed inhibitory activity for S. brevicaulis, but it varied for each of the drugs. The best antifungal effect was observed for TER and CIC. All isolates had large inhibition zones for TER and CIC. CTR was also inhibitory for all tested S. brevicaulis isolates, but the diameters of inhibition zones were smaller than for TER and CIC. Nearly 89% isolates showed inhibition zones for KET and the mean diameter of the inhibition zone was comparable to CTR. The least antifungal activity exhibited VQR, ECO and MCZ. Because of the multiresistance of S. brevicaulis, infections due to this species may not respond to particular antifungal treatment and other therapeutic approaches should be considered, e.g., combined therapy and/or surgery. PMID:21682097

  1. Preparation and application of agar/alginate/collagen ternary blend functional food packaging films.

    PubMed

    Wang, Long-Feng; Rhim, Jong-Whan

    2015-09-01

    Ternary blend agar/alginate/collagen (A/A/C) hydrogel films with silver nanoparticles (AgNPs) and grapefruit seed extract (GSE) were prepared. Their performance properties, transparency, tensile strength (TS), water vapor permeability (WVP), water contact angle (CA), water swelling ratio (SR), water solubility (WS), and antimicrobial activity were determined. The A/A/C film was highly transparent, and both AgNPs and GSE incorporated blend films (A/A/C(AgNPs) and A/A/C(GSE)) exhibited UV-screening effect, especially, the A/A/C(GSE) film had high UV-screening effect without sacrificing the transmittance. In addition, the A/A/C blend films formed efficient hydrogel film with the water holding capacity of 23.6 times of their weight. Both A/A/C(AgNPs) and A/A/C(GSE) composite films exhibited strong antimicrobial activity against both Gram-positive (Listeria monocytogenes) and Gram-negative (Escherichia coli) food-borne pathogenic bacteria. The test results of fresh potatoes packaging revealed that all the A/A/C ternary blend films prevented forming of condensed water on the packaged film surface, both A/A/C(AgNPs) and A/A/C(GSE) composite films prevented greening of potatoes during storage. The results indicate that the ternary blend hydrogel films incorporated with AgNPs or GSE can be used not only as antifogging packaging films for highly respiring fresh agriculture produce, but also as an active food packaging system utilizing their strong antimicrobial activity. PMID:26187189

  2. Comparative performance of Thin Layer Agar and Löwenstein-Jensen culture for diagnosis of tuberculosis.

    PubMed

    Battaglioli, T; Rintiswati, N; Martin, A; Palupi, K R; Bernaerts, G; Dwihardiani, B; Ahmad, R A; Matthys, F; Mahendradhata, Y; Van der Stuyft, P

    2013-11-01

    Sputum smear microscopy for the diagnosis of tuberculosis (TB) is cheap and simple but its sensitivity is low. Culture on Löwenstein-Jensen (LJ) is more sensitive but it takes a long time to yield results. Thin-Layer Agar (TLA) culture was suggested as an equally sensitive and faster alternative. We evaluated the performance of TLA for diagnosing TB in Jogjakarta, Indonesia. People with suspected TB presenting from July 2010 to July 2011 to two chest clinics of the National TB Control Programme network of Jogjakarta were eligible for inclusion. A sputum sample was sent to the Gadjah Mada University microbiology laboratory for concentration, smearing, Ziehl-Neelsen staining and culture on LJ and TLA. Sensitivity of cultures was evaluated against a composite reference standard (any positive culture). Time to detection of Mycobacteria was recorded. Out of 1414 samples, 164 (12%) were smear positive, 99 (7%) were scanty and 1151 (81%) were negative. On TLA and LJ respectively, 168 (12%) and 149 (11%) samples were positive, 72 (5%) and 32 (2%) were contaminated (κ = 0.64; 95% CI 0.59-0.69, p <0.01). Using the reference standard, 196 (14%) TB cases were identified. The sensitivity of TLA was 0.86 (95% CI 0.80-0.90), significantly higher (p 0.03) than for LJ (0.76; 95% CI 0.69-0.81). The median time to detection in days was significantly shorter (p <0.01) for TLA (12; 95% CI 11-13) than for LJ (44; 95% CI 43-45). TLA is a rapid and sensitive method for the diagnosis of TB. Implementation studies to evaluate the cost-effectiveness and impact of its introduction into programmatic settings are urgently needed. PMID:23738759

  3. Copolymers For Capillary Gel Electrophoresis

    DOEpatents

    Liu, Changsheng; Li, Qingbo

    2005-08-09

    This invention relates to an electrophoresis separation medium having a gel matrix of at least one random, linear copolymer comprising a primary comonomer and at least one secondary comonomer, wherein the comonomers are randomly distributed along the copolymer chain. The primary comonomer is an acrylamide or an acrylamide derivative that provides the primary physical, chemical, and sieving properties of the gel matrix. The at least one secondary comonomer imparts an inherent physical, chemical, or sieving property to the copolymer chain. The primary and secondary comonomers are present in a ratio sufficient to induce desired properties that optimize electrophoresis performance. The invention also relates to a method of separating a mixture of biological molecules using this gel matrix, a method of preparing the novel electrophoresis separation medium, and a capillary tube filled with the electrophoresis separation medium.

  4. Fundamentals of Polymer Gel Dosimeters

    NASA Astrophysics Data System (ADS)

    McAuley, Kim B.

    2006-12-01

    The recent literature on polymer gel dosimetry contains application papers and basic experimental studies involving polymethacrylic-acid-based and polyacrylamide-based gel dosimeters. The basic studies assess the relative merits of these two most commonly used dosimeters, and explore the effects of tetrakis hydroxymethyl phosphonium chloride (THPC) antioxidant on dosimeter performance. Polymer gel dosimeters that contain THPC or other oxygen scavengers are called normoxic dosimeters, because they can be prepared under normal atmospheric conditions, rather than in a glove box that excludes oxygen. In this review, an effort is made to explain some of the underlying chemical phenomena that affect dosimeter performance using THPC, and that lead to differences in behaviour between dosimeters made using the two types of monomer systems. Progress on the development of new more effective and less toxic dosimeters is also reported.

  5. Sol-gel derived sorbents

    DOEpatents

    Sigman, Michael E.; Dindal, Amy B.

    2003-11-11

    Described is a method for producing copolymerized sol-gel derived sorbent particles for the production of copolymerized sol-gel derived sorbent material. The method for producing copolymerized sol-gel derived sorbent particles comprises adding a basic solution to an aqueous metal alkoxide mixture for a pH.ltoreq.8 to hydrolyze the metal alkoxides. Then, allowing the mixture to react at room temperature for a precalculated period of time for the mixture to undergo an increased in viscosity to obtain a desired pore size and surface area. The copolymerized mixture is then added to an immiscible, nonpolar solvent that has been heated to a sufficient temperature wherein the copolymerized mixture forms a solid upon the addition. The solid is recovered from the mixture, and is ready for use in an active sampling trap or activated for use in a passive sampling trap.

  6. Ultrafiltration – an alternative method to polyethylene glycol precipitation for macroprolactin detection

    PubMed Central

    Beda-Maluga, Karolina; Pisarek, Hanna; Romanowska, Irena; Komorowski, Jan; Świętosławski, Jacek

    2015-01-01

    Introduction The aim of the study was to evaluate two methods of macroprolactin (MaPRL) detection – precipitation with polyethylene glycol (PEG) and ultrafiltration and to compare these techniques with “gold standard” – gel filtration chromatography (GFC). Material and methods The study was conducted on 245 patients – 45 with organic and 200 with functional hyperprolactinaemia. In all the subjects MaPRL was detected by precipitation with PEG and ultrafiltration. Additionally, gel filtration chromatography was performed in some of the serum samples. Results Macroprolactinaemia was detected in 27 patients – 8 with prolactinoma and 19 with functional hyperprolactinaemia. Assessing positive and negative results for MaPRL, we observed high diagnostic agreement (95.9%) and positive correlation (r = 0.506, p < 0.001) between the methods. The results of precipitation and ultrafiltration positive for MaPRL were concordant in 63%. The dominance of MaPRL detected with precipitation and/or ultrafiltration was confirmed by GFC in 76% of cases (all patients with functional hyperprolactinaemia). Among 6 examined patients with prolactinoma, GFC showed four false-positive results – 1 case of precipitation and 3 cases of ultrafiltration. Conclusions Efficacy of MaPRL detection with precipitation and ultrafiltration is comparable especially in cases of functional hyperprolactinaemia. In patients with prolactinoma, precipitation seems to be a more efficient separation method. PMID:26528343

  7. : comparison between magnetron sputtering and sol-gel synthesis

    NASA Astrophysics Data System (ADS)

    Cosentino, S.; Knebel, S.; Mirabella, S.; Gibilisco, S.; Simone, F.; Bracht, H.; Wilde, G.; Terrasi, A.

    2014-07-01

    SiGeO films have been produced by a sol-gel derived approach and by magnetron sputtering deposition. Post-thermal annealing of SiGeO films in forming gas or nitrogen atmosphere between 600 and 900 °C ensured the phase separation of the SiGeO films and synthesis and growth of Ge nanoclusters (NCs) embedded in SiO2. Rutherford backscattering spectrometry analysis evidenced a similar Ge concentration (~12 %), but a different Ge out-diffusion after annealing between the two types of techniques with the formation of a pure SiO2 surface layer (~30 nm thick) in sol-gel samples. The thermal evolution of Ge NCs has been followed by transmission electron microscopy and Raman analysis. In both samples, Ge NCs form with similar size increase (from ~3 up to ~7 nm) and with a concomitant amorphous to crystalline transition in the 600-800 °C temperature range. Despite a similar Ge concentration, a significant lower NCs density is observed in sol-gel samples attributed to an incomplete precipitation of Ge, which probably remains still dispersed in the matrix. The optical absorption of Ge NCs has been measured by spectrophotometry analyses. Ge NCs produced by the sol-gel method evidence an optical band gap of around 2 eV, larger than that of NCs produced by sputtering (~1.5 eV). These data are presented and discussed also considering the promising implications of a low-cost sol-gel based technique towards the fabrication of light harvesting devices based on Ge nanostructures.

  8. Statistical physics of polymer gels

    NASA Astrophysics Data System (ADS)

    Panyukov, Sergei; Rabin, Yitzhak

    1996-05-01

    This work presents a comprehensive analysis of the statistical mechanics of randomly cross-linked polymer gels, starting from a microscopic model of a network made of instantaneously cross-linked Gaussian chains with excluded volume, and ending with the derivation of explicit expressions for the thermodynamic functions and for the density correlation functions which can be tested by experiments. Using replica field theory we calculate the mean field density in replica space and show that this solution contains statistical information about the behavior of individual chains in the network. The average monomer positions change affinely with macroscopic deformation and fluctuations about these positions are limited to length scales of the order of the mesh size. We prove that a given gel has a unique state of microscopic equilibrium which depends on the temperature, the solvent, the average monomer density and the imposed deformation. This state is characterized by the set of the average positions of all the monomers or, equivalently, by a unique inhomogeneous monomer density profile. Gels are thus the only known example of equilibrium solids with no long-range order. We calculate the RPA density correlation functions that describe the statistical properties of small deviations from the average density, due to both static spatial heterogeneities (which characterize the inhomogeneous equilibrium state) and thermal fluctuations (about this equilibrium). We explain how the deformation-induced anisotropy of the inhomogeneous equilibrium density profile is revealed by small angle neutron scattering and light scattering experiments, through the observation of the butterfly effect. We show that all the statistical information about the structure of polymer networks is contained in two parameters whose values are determined by the conditions of synthesis: the density of cross-links and the heterogeneity parameter. We find that the structure of instantaneously cross

  9. [Tryptose sulphite cycloserine agar for the recovery of Clostridium perfringens in surface waters: a study of different modes of utilization].

    PubMed

    Nusca, A; Orefice, L; Paradiso, R

    2007-01-01

    In the recent European Drinking Water Directive, Clostridium perfringens has assumed increasing importance so as to be considered a primary contamination indicator. Therefore it emerged the necessity to make culture methods, aimed at its recovery, more specific and sensitive. In this study we have verified the ability of Tryptose Sulphite Cycloserine Agar plates (TSC Agar), prepared and stored before the use at refrigeration temperature (+4 degrees) for different times, to show typical colonies, using both, the single layer and double layer techniques. Results show that storage of the prepared medium, even for a few days, decrease the recovery of typical colonies although such negative effect is minimized by using the double layer technique. PMID:17405507

  10. Preparation of agar nanospheres: comparison of response surface and artificial neural network modeling by a genetic algorithm approach.

    PubMed

    Zaki, Mohammad Reza; Varshosaz, Jaleh; Fathi, Milad

    2015-05-20

    Multivariate nature of drug loaded nanospheres manufacturing in term of multiplicity of involved factors makes it a time consuming and expensive process. In this study genetic algorithm (GA) and artificial neural network (ANN), two tools inspired by natural process, were employed to optimize and simulate the manufacturing process of agar nanospheres. The efficiency of GA was evaluated against the response surface methodology (RSM). The studied responses included particle size, poly dispersity index, zeta potential, drug loading and release efficiency. GA predicted greater extremum values for response factors compared to RSM. However, real values showed some deviations from predicted data. Appropriate agreement was found between ANN model predicted and real values for all five response factors with high correlation coefficients. GA was more successful than RSM in optimization and along with ANN were efficient tools in optimizing and modeling the fabrication process of drug loaded in agar nanospheres. PMID:25817674

  11. Effect of EDTA on Pb(II) Uptake and Translocation by Tumbleweed (Salsola Kali): Agar and Hydroponics Studies

    SciTech Connect

    de la Rosa, Guadalupe; Gardea-Torresdey, Jorge L.; Peralta-Videa, Jose R.; Aldrich, Mary

    2004-03-31

    Environmental accumulation of Pb represents a worldwide health hazard. While conventional cleanup techniques are generally expensive and soil disturbing, phytoremediation represents an inexpensive friendly option for the removal of contaminants from soil and water. In this research, tumbleweed (Salsola kali) plants exposed for 15 days to Pb(NO3)2 at 80 and 125 ppm in hydroponics and agar media, demonstrated a high capacity to uptake lead. The results showed that the plants cultivated in agar accumulated 25563, 5534 and 2185 mg Pb kg-1 DW in roots, stems and leaves, respectively. Moreover, Pb concentrations found in hydroponically grown tumbleweed plants tissues were 30744, 1511 and 1421 mg kg-1 DW in roots, stems and leaves, respectively. It was observed that EDTA enhanced Pb translocation. No Pb phytotoxic effects were observed during the experimental time period. Cellular structural features were also observed using TEM.

  12. [Clinical symptoms and circumastances of acute poisonings with fly agaric (Amanita muscaria) and panther cap (Amanita pantherina)].

    PubMed

    Łukasik-Głebocka, Magdalena; Druzdz, Artur; Naskret, Maciej

    2011-01-01

    Mushroom poisonings in Poland are quite common, especially in summer and autumn, but fly agaric (Amanita muscaria) and panther cap (Amanita pantherina) are rather rare cause of these intoxications. Fly agaric is a cause of deliberate poisoning, whereas panther cap poisoning also happens accidentally. The main toxins of these two mushrooms are ibotenic acid (pantherine, agarine), muscimol, muscazone and muscaridine. The other bioactive substances are stizolobic and stizolobinic acids and aminodicarboxyethylthiopropanoic acids. All these compounds are responsible for diverse picture of intoxication. An analysis of patients with Amanita muscaria and Amanita pantherina poisoning hospitalized in the Poznan Departament of Toxicology revealed that symptoms occurred after 30 minutes to 2 hours with vomiting, hallucinations, restlessness, increased psychomotor drive and central nervous system depression. Other antycholinergic symptoms like tachycardia and increased blood pressure, mydriasis, dry and red skin were seen only in a few cases. Acute respiratory failure was the most dangerous symptom observed in the course of poisoning. PMID:22010435

  13. Use of hydrogen peroxide treatment and crystal violet agar plates for selective recovery of bacteriophages from natural environments

    SciTech Connect

    Asghari, A.; Farrah, S.R.; Bitton, G. )

    1992-04-01

    Hydrogen peroxide inactivated bacteriophages and bacteria at different rates. A concentration of 0.1% hydrogen peroxide reduced the numbers of several bacteria by an average of 94% but caused an average of 25% inactivation in the numbers of bacteriophages tested. Treating natural samples with hydrogen peroxide selectively reduced the indigenous bacterial flora and permitted better visualization of plaques of lawns of Escherichia coli C-3000. In some cases indigenous gram-positive bacteria were relatively resistant to hydrogen peroxide, but their growth could be limited by incorporation of crystal violet into the bottom agar used for plaque assays. The use of hydrogen peroxide treatment and crystal violet-containing plates permitted recovery of more phages from natural samples than did other procedures, such as chloroform pretreatment or the use of selective plating agar such as EC medium.

  14. Novel gels and their dispersions--oral drug delivery systems for ciclosporin.

    PubMed

    Murdan, Sudaxshina; Andrýsek, Tomas; Son, Delphine

    2005-08-26

    Amphiphilogels (gels that consist solely of surfactants) and gel-based emulsion (GEM) formulations (solutions that gel upon incorporation of small amounts of water) were investigated as oral delivery vehicles for ciclosporin A, in in vivo experiments in Beagle dogs. Both systems represent essentially self-dispersing non-lipidic drug delivery systems based on amphiphilic surfactants. Three different amphiphilogels (hydrophobic, hydrophilic and hydrophilic gel containing ethanol), the aqueous dispersions of the latter two amphiphilogels and of two GEM formulations were tested to determine the influence of (i) gel hydrophilicity/hydrophobicity, (ii) presence of ethanol, (iii) pre-dispersion of gels into aqueous medium prior to oral administration and (iv) size of dispersions, on drug absorption. It was found that all the formulations tested, except for the hydrophilic amphiphilogel and its aqueous dispersion, were bioequivalent to Neoral, the commercially available preparation. High drug absorption from the bioequivalent formulations was thought to be due to the fact that following oral administration, ciclosporin remained in a soluble form, hence was available for absorption, despite relatively large droplet sizes of the formulations. The hydrophilic gel and its dispersion allowed less drug absorption; this was assigned to the fact that, when the hydrophilic amphiphilogel contacted an aqueous medium, there were no lipophilic domains in which the drug could remain soluble. It is possible that some drug precipitated out and was unavailable for absorption. PMID:16009515

  15. Isolation of Shiga Toxin-Producing Escherichia coli from Ground Beef Using Multiple Combinations of Enrichment Broths and Selective Agars.

    PubMed

    Brusa, Victoria; Piñeyro, Pablo E; Galli, Lucía; Linares, Luciano H; Ortega, Emanuel E; Padola, Nora L; Leotta, Gerardo A

    2016-03-01

    Shiga toxin-producing Escherichia coli (STEC) are foodborne pathogens, and beef cattle are recognized as the principal reservoir. The aims of this study were (1) to identify the most sensitive combination of selective enrichment broths and agars for STEC isolation in artificially inoculated ground beef samples, and (2) to evaluate the most efficient combination(s) of methods for naturally contaminated ground beef samples. A total of 192 ground beef samples were artificially inoculated with STEC and non-stx bacterial strains. A combination of four enrichment broths and three agars were evaluated for sensitivity, specificity, and positive predictive value for STEC isolation from experimentally inoculated samples. Enrichments with either modified tryptic soy broth (mTSB) containing 8 mg/L novobiocin (mTSB-8) or modified Escherichia coli (mEC) broth followed by isolation in MacConkey agar were the most sensitive combinations for STEC isolation of artificially inoculated samples. Independently, both enrichments media followed by isolation in MacConkey were used to evaluate ground beef samples from 43 retail stores, yielding 65.1% and 58.1% stx-positive samples by RT-PCR, respectively. No difference was observed in the isolate proportions between these two methods (8/25 [32%] and 8/28 [28.6%]). Identical serotypes and stx genotypes were observed in STEC strains isolated from the same samples by either method. In this study, no single enrichment protocol was sufficient to detect all STEC in artificially inoculated samples and had considerable variation in detection ability with naturally contaminated samples. Moreover, none of the single or combinations of multiple isolation agars used were capable of identifying all STEC serogroups in either artificially inoculated or naturally occurring STEC-contaminated ground beef. Therefore, it may be prudent to conclude that there is no single method or combination of isolation methods capable of identifying all STEC serogroups

  16. Comparison of the BBL CHROMagar Staph aureus Agar Medium to Conventional Media for Detection of Staphylococcus aureus in Respiratory Samples

    PubMed Central

    Flayhart, Diane; Lema, Clara; Borek, Anita; Carroll, Karen C.

    2004-01-01

    Screening for Staphylococcus aureus has become routine in certain patient populations. This study is the first clinical evaluation of the BBL CHROMagar Staph aureus agar (CSA) medium (BD Diagnostics, Sparks, Md.) for detection of S. aureus in nasal surveillance cultures and in respiratory samples from cystic fibrosis (CF) patients. S. aureus colonies appear mauve on CSA. Other organisms are inhibited or produce a distinctly different colony color. S. aureus was identified from all media by slide coagulase, exogenous DNase, and mannitol fermentation assays. Susceptibility testing was performed using the agar dilution method. A total of 679 samples were evaluated. All samples were inoculated onto CSA. Nasal surveillance cultures were inoculated onto sheep blood agar (SBA) (BD Diagnostics), and samples from CF patients were inoculated onto mannitol salt agar (MSA) (BD Diagnostics). Of the 679 samples cultured, 200 organisms produced a mauve color on CSA (suspicious for S. aureus) and 180 were positive for S. aureus on SBA or MSA. Of 200 CSA-positive samples 191 were identified as S. aureus. Nine mauve colonies were slide coagulase negative and were subsequently identified as Staphylococcus lugdunensis (one), Staphylococcus epidermidis (three), Staphylococcus haemolyticus (one), and Corynebacterium species (four). CSA improved the ability to detect S. aureus by recovering 12 S. aureus isolates missed by conventional media. Of the 192 S. aureus isolates recovered, 122 were methicillin susceptible and 70 were methicillin resistant. Overall, the sensitivity and specificity of CSA in this study were 99.5 and 98%, respectively. There was no difference in the performance of the slide coagulase test or in susceptibility testing performed on S. aureus recovered from CSA compared to SBA or MSA. Our data support the use of CSA in place of standard culture media for detection of S. aureus in heavily contaminated respiratory samples. PMID:15297498

  17. Liofilchem® O.A. Listeria agar and direct CAMP test provided sooner Listeria monocytogenes identification from neonatal bacteremia

    PubMed Central

    Savini, Vincenzo; Marrollo, Roberta; Serio, Annalisa; Paparella, Antonello; Argentieri, Angela Valentina; D’Antonio, Marianna; Coclite, Eleonora; Fusilli, Paola; Fazii, Paolo

    2014-01-01

    Listeria monocytogenes infection in pregnant women and newborns is a cause for serious concern, and invasive disease outcome strongly depends on prompt antibiotic therapy. To provide sooner identification from neonatal bacteremia we performed a CAMP test directly on positive blood aliquots and inoculated the Liofilchem® O.A. Listeria chromogenic agar as well, thus providing a 24-h turn-around time for response. PMID:24695762

  18. Purification of diverse hemoglobins by metal salt precipitation.

    PubMed

    Zimmerman, Devon; Dienes, Jack; Abdulmalik, Osheiza; Elmer, Jacob J

    2016-09-01

    Although donated blood is the preferred material for transfusion, its limited availability and stringent storage requirements have motivated the development of blood substitutes. The giant extracellular hemoglobin (aka erythrocruorin) of the earthworm Lumbricus terrestris (LtEc) has shown promise as a blood substitute, but an efficient purification method for LtEc must be developed to meet the potential large demand for blood substitutes. In this work, an optimized purification process that uses divalent and trivalent metal salts to selectively precipitate human, earthworm, and bloodworm hemoglobin (HbA, LtEc, and GdHb, respectively) from crude solutions was developed. Although several metal ions were able to selectively precipitate LtEc, Zn(2+) and Ni(2+) provided the lowest heme oxidation and highest overall yield of LtEc. In contrast, Zn(2+) was the only metal ion that completely precipitated HbA and GdHb. Polyacrylamide gel electrophoresis (PAGE) analysis shows that metal precipitation removes several impurities to provide highly pure hemoglobin samples. Heme oxidation levels were relatively low for Zn(2+)-purified HbA and LtEc (2.4±1.3% and 5.3±2.1%, respectively), but slightly higher for Ni(2+)-purified LtEc (8.4±1.2%). The oxygen affinity and cooperativity of the precipitated samples are also identical to samples purified with tangential flow filtration (TFF) alone, indicating the metal precipitation does not significantly affect the function of the hemoglobins. Overall, these results show that hemoglobins from several different species can be highly purified using a combination of metal (Zn(2+)) precipitation and tangential flow filtration. PMID:26363116

  19. Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties.

    PubMed

    Sousa, Ana M M; Souza, Hiléia K S; Latona, Nicholas; Liu, Cheng-Kung; Gonçalves, Maria P; Liu, LinShu

    2014-10-13

    In the present paper, we test the suitability of ChCl/urea (DES-U) and ChCl/glycerol (DES-G) eutectic mixtures, each one prepared at 1:2 molar ratio, for the production of agar films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and subsequent drying. The mechanical properties, water resistance and microstructure of the films were evaluated at different polymer concentrations (i.e. 2-6%, w/w). DES-U showed by far, the best film forming ability. Agreeing with the diffusion and SEM data, films with the best mechanical properties were found at the lowest and highest agar concentrations (tensile strengths of 24.2-42 MPa and elongations of 15.4-38.9%). The water sorption and contact angle studies suggested increased hydrophilicity for the film containing the lowest concentration of agar. The use of choline chloride based ionic liquid analogues as solvent and plasticizer might be a promising tool for the development of new non-aqueous materials based on seaweed polysaccharides. PMID:25037344

  20. Nutrient limitation leads to penetrative growth into agar and affects aroma formation in Pichia fabianii, P. kudriavzevii and Saccharomyces cerevisiae.

    PubMed

    van Rijswijck, Irma M H; Dijksterhuis, Jan; Wolkers-Rooijackers, Judith C M; Abee, Tjakko; Smid, Eddy J

    2015-01-01

    Among fermentative yeast species, Saccharomyces cerevisiae is most frequently used as a model organism, although other yeast species may have special features that make them interesting candidates to apply in food-fermentation processes. In this study, we used three yeast species isolated from fermented masau (Ziziphus mauritiana) fruit, S. cerevisiae 131, Pichia fabianii 65 and Pichia kudriavzevii 129, and determined the impact of nitrogen and/or glucose limitation on surface growth mode and the production of volatile organic compounds (VOCs). All three species displayed significant changes in growth mode in all nutrient-limited conditions, signified by the formation of metafilaments or pseudohyphae. The timing of the transition was found to be species-specific. Transition in growth mode is suggested to be linked to the production of certain fusel alcohols, such as phenylethyl alcohol, which serve as quorum-sensing molecules. Interestingly, we did not observe concomitant increased production of phenylethyl alcohol and filamentous growth. Notably, a broader range of esters was found only for the Pichia spp. grown on nitrogen-limited agar for 21 days compared to nutrient-rich agar, and when grown on glucose- and glucose- plus nitrogen-limited agar. Our data suggest that for the Pichia spp., the formation of esters may play an important role in the switch in growth mode upon nitrogen limitation. Further biological or ecological implications of ester formation are discussed. PMID:25308873

  1. A soft agar colony assay for Lewis lung tumour and B16 melanoma taken directly from the mouse.

    PubMed Central

    Courtenay, V. D.

    1976-01-01

    A soft agar colony assay has been developed for the B16 mouse melanoma and the Lewis lung tumour. The special features of the technique are the use of a gas phase with 5% O2 instead of air and the addition of rat red blood cells. Single cell suspensions are prepared by trypsinization from the solid tumour and the cells are plated out in 0-3% agar over a layer of 0-5% agar in 30-mm Petri dishes. After 8 to 15 days' incubation in 5% O2, colonies of more than 50 cells are produced. Plating efficiencies of between 30 and 50% are usually obtained. The addition of up to 10(4) heavily irradiated tumour cells gives some further improvement in plating efficiency for the B16 melanoma but not for the Lewis lung tumour. Applications of the technique to measure cell survival in the two tumours after treatment with cytotoxic drugs and radiation are reported. The scatter of experimental points is relatively small, and in comparative experiments good agreement has been obtained with results using in vivo assay techniques. PMID:782495

  2. Comparison of E-test with agar dilution methods in testing susceptibility of N. gonorrhoeae to azithromycin.

    PubMed

    Yasin, R M; Suan, K A; Meng, C Y

    1997-05-01

    A single dose of a new antibiotic, azithromycin, has been shown to be effective in the treatment of uncomplicated Neisseria gonorrhoeae. A clinical study was conducted to assess the in vitro susceptibility of N gonorrhoeae to azithromycin and compare the reliability of results obtained using the new E-test methodology for determination of the minimum inhibitory concentration (MIC) of antibiotic with those obtained through the standard agar dilution method. 135 clinical isolates of N gonorrhoeae were obtained from patients attending hospital-based sexually transmitted disease clinics in five geographic locations in Malaysia. 76 of the isolates were penicillinase-producing N gonorrhoeae and 69 were high-level tetracycline-resistant N gonorrhoeae. All isolates were susceptible to azithromycin based on the susceptible MIC breakpoint of 2.0 mcg/ml. The MICs ranged from 0.0078-0.25 mcg/ml by agar dilution method and from 0.016-0.50 mcg/ml by E-test. Agreement between these two methods was 97.8%. The single-dose regime and good antigonococcal and antichlamydial activity of azithromycin make this antibiotic a suitable treatment choice. Moreover, the findings of this study suggest that the simpler, faster E-test is as reliable as the agar dilution method. Given the tendency of the antimicrobial susceptibility pattern of N gonorrhoeae to change rapidly, it is important to monitor MICs to detect the emergence of resistance. PMID:9153733

  3. Irradiation of silver and agar/silver nanoparticles with argon, oxygen glow discharge plasma, and mercury lamp.

    PubMed

    Ahmad, Mahmoud M; Abdel-Wahab, Essam A; El-Maaref, A A; Rawway, Mohammed; Shaaban, Essam R

    2014-01-01

    The irradiation effect of argon, oxygen glow discharge plasma, and mercury lamp on silver and agar/silver nanoparticle samples is studied. The irradiation time dependence of the synthesized silver and agar/silver nanoparticle absorption spectra and their antibacterial effect are studied and compared. In the agar/silver nanoparticle sample, as the irradiation time of argon glow discharge plasma or mercury lamp increases, the peak intensity and the full width at half maximum, FWHM, of the surface plasmon resonance absorption band is increased, however a decrease of the peak intensity with oxygen glow plasma has been observed. In the silver nanoparticle sample, as the irradiation time of argon, oxygen glow discharge plasma or mercury lamp increases, the peak intensity of the surface plasmon resonance absorption band is increased, however, there is no significant change in the FWHM of the surface plasmon resonance absorption band. The SEM results for both samples showed nanoparticle formation with mean size about 50 nm and 40 nm respectively. Throughout the irradiation time with the argon, oxygen glow discharge plasma or mercury lamp, the antibacterial activity of several kinds of Gram-positive and Gram-negative bacteria has been examined. PMID:25184109

  4. Sol-Gel synthesis of MgO-SiO2 glass compositions having stable liquid-liquid immiscibility

    NASA Technical Reports Server (NTRS)

    Bansal, Narottam P.

    1987-01-01

    MgO-SiO2 glasses containing up to 15 mol % MgO, which could not have been prepared by the conventional glass melting method due to the presence of stable liquid-liquid immiscibility, were synthesized by the sol-gel technique. Clear and transparent gels were obtained from the hydrolysis and polycondensation of silicon tetraethoxide (TEOS) and magnesium nitrate hexahydrate when the water/TEOS mole ratio was four or more. The gelling time decreased with increase in magnesium content, water/TEOS ratio, and reaction temperature. Magnesium nitrate hexahydrate crystallized out of the gels containing 15 and 20 mol % MgO on slow drying. This problem was partially alleviated by drying the gels quickly at higher temperatures. Monolithic gel samples were prepared using glycerol as the drying control additive. The gels were subjected to various thermal treatments and characterized by several methods. No organic groups could be detected in the glasses after heat treatments to approx. 800 C, but trace amounts of hydroxyl groups were still present. No crystalline phase was found from X-ray diffraction in the gel samples to approx. 890 C. At higher temperatures, alpha quartz precipitated out as the crystalline phase in gels containing up to 10 mol % MgO. The overall activation energy for gel formation in 10MgO-90SiO2 (mol %) system for water/TEOS mole ratio of 7.5 was calculated to be 58.7 kJ/mol.

  5. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation

    SciTech Connect

    Bernal, Susan A.; Provis, John L.; Walkley, Brant; San Nicolas, Rackel; Gehman, John D.; Brice, David G.; Kilcullen, Adam R.; Duxson, Peter; Deventer, Jannie S.J. van

    2013-11-15

    Binders formed through alkali-activation of slags and fly ashes, including ‘fly ash geopolymers’, provide appealing properties as binders for low-emissions concrete production. However, the changes in pH and pore solution chemistry induced during accelerated carbonation testing provide unrealistically low predictions of in-service carbonation resistance. The aluminosilicate gel remaining in an alkali-activated slag system after accelerated carbonation is highly polymerised, consistent with a decalcification mechanism, while fly ash-based binders mainly carbonate through precipitation of alkali salts (bicarbonates at elevated CO{sub 2} concentrations, or carbonates under natural exposure) from the pore solution, with little change in the binder gel identifiable by nuclear magnetic resonance spectroscopy. In activated fly ash/slag blends, two distinct gels (C–A–S–H and N–A–S–H) are formed; under accelerated carbonation, the N–A–S–H gel behaves comparably to fly ash-based systems, while the C–A–S–H gel is decalcified similarly to alkali-activated slag. This provides new scope for durability optimisation, and for developing appropriate testing methodologies. -- Highlights: •C-A-S-H gel in alkali-activated slag decalcifies during accelerated carbonation. •Alkali-activated fly ash gel changes much less under CO{sub 2} exposure. •Blended slag-fly ash binder contains two coexisting gel types. •These two gels respond differently to carbonation. •Understanding of carbonation mechanisms is essential in developing test methods.

  6. Nonlinear elasticity of alginate gels

    NASA Astrophysics Data System (ADS)

    Hashemnejad, Seyed Meysam; Kundu, Santanu

    Alginate is a naturally occurring anionic polysaccharide extracted from brown algae. Because of biocompatibility, low toxicity, and simple gelation process, alginate gels are used in biomedical and food applications. Here, we report the rheological behavior of ionically crosslinked alginate gels, which are obtained by in situ gelation of alginates with calcium salts, in between two parallel plates of a rheometer. Strain stiffening behavior was captured using large amplitude oscillatory shear (LAOS) experiments. In addition, negative normal stress was observed for these gels, which has not been reported earlier for any polysaccharide networks. The magnitude of negative normal stress increases with applied strain and can exceed that of the shear stress at large strain. Rheological results fitted with a constitutive model that considers both stretching and bending of chains indicate that nonlinearity is likely related to the stretching of the chains between the crosslink junctions. The results provide an improved understanding of the deformation mechanism of ionically crosslinked alginate gel and the results will be important in developing synthetic extracellular matrix (ECM) from these materials.

  7. [Comparison of ertapenem-EMB Agar with traditional methods for screening carbapenem-resistant Klebsiella pneumoniae from rectal swabs].

    PubMed

    Perçin, Duygu; Colakoğlu, Selcan; Durmaz, Süleyman; Ekincioğlu, Pınar

    2012-10-01

    Detection of rectal colonization with carbapenem-resistant Klebsiella pneumoniae (CRKP) is the most important step in the infection control protocols in order to prevent infections caused by CRKP which has an increasing incidence all over the world. In this study, it was aimed to compare the detection rate of 2 mg/L ertapenem EMB agar medium with the other methods recommended by various international guidelines. These methods include direct plate method using ertapenem disc, enrichment method in tryptic soy broth containing 2 mg/L ertapenem and the investigation of the predominant betalactamases in the colonized patients. The lowest inoculum detected by different methods was determined by using simulative challenge test prepared for this purpose. The ability to detect CRKP from rectal swabs was evaluated by using the clinical specimens of 801 patients. For all bacteria isolated, carbapenem susceptibility was evaluated by using E-test method, the presence of beta-lactamases was determined by using modified Hodge test (MHT), and the carbapenemase genes were investigated by using multiplex polymerase chain reaction (PCR). The lowest inoculum detected by ertapenem-EMB agar was 50 CFU/mL whereas the lowest inocula were 1 x 105 and 1 x 103, respectively by tryptic soy broth with ertapenem and direct plate method. No resistance gene were identified by PCR in 13 (39.4%) of 33 isolates, whereas blaOXA-48 was detected in 19 (95%) and blaIMP in 1 (5%) of 20 positive isolates. All of the positive strains were resistant to imipenem and ertapenem, while 2 (10%) strains were found to be susceptible to doripenem and meropenem. While MHT was negative in all strains which were negative for resistance genes, all resistance gene positive strains except one blaOXA-48 strain that was also sensitive to doripenem and meropenem, were found to be positive with MHT. According to the results of PCR, the sensitivities of the three methods were found to be 80%. The specificities, positive and

  8. Agar Block Smear Preparation: a Novel Method of Slide Preparation for Preservation of Native Fungal Structures for Microscopic Examination and Long-Term Storage▿

    PubMed Central

    Woo, Patrick C. Y.; Ngan, Antonio H. Y.; Chui, Hon-Kit; Lau, Susanna K. P.; Yuen, Kwok-Yung

    2010-01-01

    We describe a novel method of fungal slide preparation named “agar block smear preparation.” A total of 510 agar block smears of 25 fungal strains obtained from culture collections, 90 QC fungal strains, and 82 clinical fungal strains from our clinical microbiology laboratory, which included a total of 137 species of yeasts, molds, and thermal dimorphic fungi, were prepared and examined. In contrast to adhesive tape preparation, agar block smears preserved the native fungal structures, such as intact conidiophores of Aspergillus species and arrangements of conidia in Scopulariopsis brevicaulis. Furthermore, agar block smears allowed examination of fungal structures embedded in the agar, such as the ascomata with ascomal hairs in Chaetomium funicola; pycnidium of Phoma glomerata; the intercalary ovoidal chlamydospores arranged in chains of Fusarium dimerum; and the lateral, spherical chlamydospores arranged in pairs of Fusarium solani. After 1 year of storage, morphological integrity was found to have been maintained in 459 (90%) of the 510 agar block smears. After 3 years of storage, morphological integrity was found to have been maintained in 72 (71%) of the 102 smears prepared in 2006. Agar block smear preparation preserves the native fungal structures and allows long-term storage and examination of fungal structures embedded in the agar, hence overcoming the major drawbacks of adhesive tape preparation. The major roles of agar block smear should be diagnosis for difficult cases, accurate identification of fungal species for clinical management of patients and epidemiological studies, and long-term storage for transportation of slides and education purposes. PMID:20660221

  9. BOTANICAL ASPECTS OF ACIDIC PRECIPITATION

    EPA Science Inventory

    Acidic precipitation can be characterized as wet or frozen atmospheric deposition with a hydrogen ion concentration greater than 2.5 microequivalents liter-1. Acidic precipitation is perceived as a significant air pollution problem derived chiefly from combustion of fossil fuels,...

  10. Improved ethanol precipitation of DNA.

    PubMed

    Fregel, Rosa; González, Ana; Cabrera, Vicente M

    2010-04-01

    In this Short Communication, a shorter version of the standard DNA ethanol precipitation and purification protocol is described. It uses a mixture of 70% ethanol, 75 mM ammonium acetate and different concentrations of different carriers to perform DNA precipitation and washing in only one step. PMID:20336673

  11. Precipitation Process and Apparatus Therefor

    DOEpatents

    Stang, Jr, L C

    1950-12-05

    This invention concerns an apparatus for remotely-controlled precipitation and filtration operations. Liquid within a precipitation chamber is maintained above a porous member by introducing air beneath the member; pressure beneath the porous member is reduced to suck the liquid through the member and effect filtration.

  12. Acid precipitation in historical perspective

    SciTech Connect

    Cowling, E.B.

    1982-02-01

    The history of acid precipitation is traced from the first awareness of the problem in the mid-17th century to the present. An outline of the National Acid Precipitation Assessment program is also given, and the author makes recommendations for future research. (JMT)

  13. Precipitation in the Solar System

    ERIC Educational Resources Information Center

    McIntosh, Gordon

    2007-01-01

    As an astronomy instructor, I am always looking for commonly observed Earthly experiences to help my students and me understand and appreciate similar occurrences elsewhere in the solar system. Recently I wrote a short TPT article on frost. This paper is on the related phenomena of precipitation. Precipitation, so common on most of the Earth's…

  14. Resistivity Problems in Electrostatic Precipitation

    ERIC Educational Resources Information Center

    White, Harry J.

    1974-01-01

    The process of electrostatic precipitation has ever-increasing application in more efficient collection of fine particles from industrial air emissions. This article details a large number of new developments in the field. The emphasis is on high resistivity particles which are a common cause of poor precipitator performance. (LS)

  15. Calculating Percent Gel For Process Control

    NASA Technical Reports Server (NTRS)

    Webster, Charles Neal; Scott, Robert O.

    1988-01-01

    Reaction state of thermosetting resin tracked to assure desired properties. Rate of gel determined as function of temperature by measuring time to gel of part of graphite fabric impregnated with Hexcel R120 (or equivalent) phenolic resin.

  16. Dye-sensitized solar cell with natural gel polymer electrolytes and f-MWCNT as counter-electrode

    NASA Astrophysics Data System (ADS)

    Nwanya, A. C.; Amaechi, C. I.; Ekwealor, A. B. C.; Osuji, R. U.; Maaza, M.; Ezema, F. I.

    2015-05-01

    Samples of DSSCs were made with gel polymer electrolytes using agar, gelatin and DNA as the polymer hosts. Anthocyanine dye from Hildegardia barteri flower is used to sensitize the TiO2 electrode, and the spectrum of the dye indicates strong absorptions in the blue region of the solar spectrum. The XRD pattern of the TiO2 shows that the adsorption of the dye did not affect the crystallinity of the electrode. The f-MWCNT indicates graphite structure of the MWCNTs were acid oxidized without significant damage. Efficiencies of 3.38 and 0.1% were obtained using gelatin and DNA gel polymer electrolytes, respectively, for the fabricated dye-sensitized solar cells.

  17. Characteristics of platelet gels combined with silk

    PubMed Central

    Pallotta, Isabella; Kluge, Jonathan A.; Moreau, Jodie; Calabrese, Rossella

    2014-01-01

    Platelet gel, a fibrin network containing activated platelets, is widely used in regenerative medicine due the capacity of platelet-derived growth factors to accelerate and direct healing processes. However, limitations to this approach include poor mechanical properties, relatively rapid degradation, and the lack of control of release of growth factors at the site of injection. These issues compromise the ability of platelet gels for sustained function in regenerative medicine. In the present study, a combination of platelet gels with silk fibroin gel was studied to address the above limitations. Mixing sonicated silk gels with platelet gels extended the release of growth factors without inhibiting gel forming ability. The released growth factors were biologically active and their delivery was modified further by manipulation of the charge of the silk protein. Moreover, the silk gel augmented both the rheological properties and compressive stiffness of the platelet gel, tuned by the silk concentration and/or silk/platelet gel ratio. Silk-platelet gel injections in nude rats supported enhanced cell infiltration and blood vessel formation representing a step towards new platelet gel formulations with enhanced therapeutic impact. PMID:24480538

  18. Spring-loaded polymeric gel actuators

    DOEpatents

    Shahinpoor, M.

    1995-02-14

    Spring-loaded electrically controllable polymeric gel actuators are disclosed. The polymeric gels can be polyvinyl alcohol, polyacrylic acid, or polyacrylamide, and are contained in an electrolytic solvent bath such as water plus acetone. The action of the gel is mechanically biased, allowing the expansive and contractile forces to be optimized for specific applications. 5 figs.

  19. A clarified gel for crystal growth

    NASA Technical Reports Server (NTRS)

    Barber, P. G.; Simpson, N. R.

    1985-01-01

    A procedure for preparing clarified sodium silicate gels suitable for crystal growth is described. In the method described here, the silicate stock is clarified by pretreating it with cation exchange resins before preparing the gels. Also, a modified recipe is proposed for preparing gels to achieve improved transparency.

  20. Characteristics of platelet gels combined with silk.

    PubMed

    Pallotta, Isabella; Kluge, Jonathan A; Moreau, Jodie; Calabrese, Rossella; Kaplan, David L; Balduini, Alessandra

    2014-04-01

    Platelet gel, a fibrin network containing activated platelets, is widely used in regenerative medicine due the capacity of platelet-derived growth factors to accelerate and direct healing processes. However, limitations to this approach include poor mechanical properties, relatively rapid degradation, and the lack of control of release of growth factors at the site of injection. These issues compromise the ability of platelet gels for sustained function in regenerative medicine. In the present study, a combination of platelet gels with silk fibroin gel was studied to address the above limitations. Mixing sonicated silk gels with platelet gels extended the release of growth factors without inhibiting gel-forming ability. The released growth factors were biologically active and their delivery was modified further by manipulation of the charge of the silk protein. Moreover, the silk gel augmented both the rheological properties and compressive stiffness of the platelet gel, tuned by the silk concentration and/or silk/platelet gel ratio. Silk-platelet gel injections in nude rats supported enhanced cell infiltration and blood vessel formation representing a step towards new platelet gel formulations with enhanced therapeutic impact. PMID:24480538

  1. Spring-loaded polymeric gel actuators

    DOEpatents

    Shahinpoor, Mohsen

    1995-01-01

    Spring-loaded electrically controllable polymeric gel actuators are disclosed. The polymeric gels can be polyvinyl alcohol, polyacrylic acid, or polyacrylamide, and are contained in an electrolytic solvent bath such as water plus acetone. The action of the gel is mechanically biased, allowing the expansive and contractile forces to be optimized for specific applications.

  2. Influence of eggshell matrix proteins on the precipitation of calcium carbonate (CaCO 3)

    NASA Astrophysics Data System (ADS)

    Hernández-Hernández, A.; Vidal, M. L.; Gómez-Morales, J.; Rodríguez-Navarro, A. B.; Labas, V.; Gautron, J.; Nys, Y.; García Ruiz, J. M.

    2008-04-01

    To understand the role of eggshell organic matrix on the biomineralization process, we have tested the influence of different purified fractions of the eggshell organic matrix on calcium carbonate (CaCO 3) precipitation. Purification was carried out after successive anion-exchange chromatography, hydrophobic interaction chromatography and gel filtration chromatography of two different prepurified eggshell extracts (A) and (B); the purified fractions (named g, h, n and r) and ( c', g', i', k') respectively were diluted to 50 μg/ml before being tested in vitro and analysed by the sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) procedure and mass spectrometry. The precipitation experiments were carried out by the method of vapour diffusion on crystallization mushrooms. Each purified fraction showed a different effect on CaCO 3 precipitation. Some of them exhibited a strong inhibitory effect on nucleation, thus suppressing the precipitation of CaCO 3 almost totally while the others did not produce any notable effect. However, all fractions favoured the precipitation of calcite over the other CaCO 3 polymorphs. Additionally, all fractions modified in a different manner the size and morphology of the precipitated calcite crystals.

  3. Estimation of continental precipitation recycling

    NASA Technical Reports Server (NTRS)

    Brubaker, Kaye L.; Entekhabi, Dara; Eagleson, P. S.

    1993-01-01

    The total amount of water that precipitates on large continental regions is supplied by two mechanisms: 1) advection from the surrounding areas external to the region and 2) evaporation and transpiration from the land surface within the region. The latter supply mechanism is tantamount to the recycling of precipitation over the continental area. The degree to which regional precipitation is supplied by recycled moisture is a potentially significant climate feedback mechanism and land surface-atmosphere interaction, which may contribute to the persistence and intensification of droughts. Gridded data on observed wind and humidity in the global atmosphere are used to determine the convergence of atmospheric water vapor over continental regions. A simplified model of the atmospheric moisture over continents and simultaneous estimates of regional precipitation are employed to estimate, for several large continental regions, the fraction of precipitation that is locally derived. The results indicate that the contribution of regional evaporation to regional precipitation varies substantially with location and season. For the regions studied, the ratio of locally contributed to total monthly precipitation generally lies between 0. 10 and 0.30 but is as high as 0.40 in several cases.

  4. The Swelling of Olympic Gels

    NASA Astrophysics Data System (ADS)

    Lang, Michael; Fischer, Jakob; Werner, Marco; Sommer, Jens-Uwe

    2014-03-01

    The swelling equilibrium of Olympic gels is studied by Monte Carlo Simulations. We observe that gels consisting of flexible cyclic molecules of a higher degree of polymerization N show a smaller equilibrium swelling degree Q ~N - 0 . 28φ0- 0 . 72 for the same monomer volume fraction φ0 at network preparation. This observation is explained by a disinterpenetration process of overlapping non-concatenated polymers upon swelling. In the limit of a sufficiently large number of concatenations per cyclic molecule we expect that the equilibrium degree of swelling becomes proportional to φ0- 1 / 2 independent of N. Our results challenge current textbook models for the equilibrium degree of swelling of entangled polymer networks. Now at: Bio Systems Analysis Group, Jena Centre for Bioinformatics (JCB) and Department for Mathematics and Computer Sciences, Friedrich Schiller University of Jena, 07743 Jena, Germany.

  5. Supercoiling transformation of chemical gels.

    PubMed

    Asai, Makoto; Katashima, Takuya; Sakai, Takamasa; Shibayama, Mitsuhiro

    2015-09-28

    The swelling/deswelling behavior of chemical gels has been an unsolved problem disputed over for a long time. The Obukhov-Rubinstein-Colby model depicts the influence that swelling/deswelling has on elasticity, but its physical picture is too complicated to be sufficiently validated by experiment. In this study, we use molecular dynamics simulation to verify the validity of the molecular picture of network strands predicted by the Obukhov-Rubinstein-Colby model. We conclude that the physical picture of the Obukhov-Rubinstein-Colby model is reasonable, and furthermore the simulation can reveal the details of conformational changes in network strands during the supercoiling transformation. Our findings not only reveal the validity, but also give a better understanding of the dynamics of the swelling/deswelling behavior of chemical gels. PMID:26279149

  6. Nanocrystal/sol-gel nanocomposites

    DOEpatents

    Klimov, Victor L.; Petruska, Melissa A.

    2010-05-25

    The present invention is directed to a process for preparing a solid composite having colloidal nanocrystals dispersed within a sol-gel matrix, the process including admixing colloidal nanocrystals with an amphiphilic polymer including hydrophilic groups selected from the group consisting of --COOH, --OH, --SO.sub.3H, --NH.sub.2, and --PO.sub.3H.sub.2 within a solvent to form an alcohol-soluble colloidal nanocrystal-polymer complex, admixing the alcohol-soluble colloidal nanocrystal-polymer complex and a sol-gel precursor material, and, forming the solid composite from the admixture. The present invention is also directed to the resultant solid composites and to the alcohol-soluble colloidal nanocrystal-polymer complexes.

  7. Multiscale modeling of polyelectrolyte gels

    NASA Astrophysics Data System (ADS)

    Wallmersperger, Thomas; Wittel, Falk K.; Kröplin, Bernd H.

    2006-03-01

    Electrolyte polymer gels are a very attractive class of actuation materials with remarkable electronic and mechanical properties having a great similarity to biological contractile tissues. They consist of a polymer network with ionizable groups and a liquid phase with mobile ions. Absorption and delivery of solvent lead to a considerably large change of volume. Due to this capability, they can be used as actuators for technical applications, where large swelling and shrinkage is desired. In the present work chemically and electrically stimulated polymer gels in a solution bath are investigated. To describe the different complicated phenomena occurring in these gels adequately, the modeling can be conducted on different scales. Therefore, models based on the statistical theory and porous media theory, as well as a multi-field model and a discrete element formulation are derived. A refinement of the different theories from global macroscopic to microscopic are presented in this paper: The statistical theory is a macroscopic theory capable to describe the global swelling or bending e.g. of a gel film, while the general theory of porous media (TPM) is a macroscopic continuum theory which is based on the theory of mixtures extended by the concept of volume fractions. The TPM is a homogenized model, i.e. all geometrical and physical quantities can be seen as statistical averages of the real quantities. The presented chemo-electro-mechanical multi-field formulation is a mesoscopic theory. It is capable of giving the concentrations and the electric potential in the whole domain. Finally the (micromechanical) discrete element (DE) theory is employed. In this case, the continuum is represented by distributed particles with local interaction relations combined with balance equations for the chemical field. This method is predestined for problems involving large displacements, strains and discontinuities. The presented formulations are compared and conclusions on their

  8. Precipitation Measurements from Space: The Global Precipitation Measurement Mission

    NASA Technical Reports Server (NTRS)

    Hou, Arthur Y.

    2007-01-01

    Water is fundamental to the life on Earth and its phase transition between the gaseous, liquid, and solid states dominates the behavior of the weather/climate/ecological system. Precipitation, which converts atmospheric water vapor into rain and snow, is central to the global water cycle. It regulates the global energy balance through interactions with clouds and water vapor (the primary greenhouse gas), and also shapes global winds and dynamic transport through latent heat release. Surface precipitation affects soil moisture, ocean salinity, and land hydrology, thus linking fast atmospheric processes to the slower components of the climate system. Precipitation is also the primary source of freshwater in the world, which is facing an emerging freshwater crisis in many regions. Accurate and timely knowledge of global precipitation is essential for understanding the behavior of the global water cycle, improving freshwater management, and advancing predictive capabilities of high-impact weather events such as hurricanes, floods, droughts, and landslides. With limited rainfall networks on land and the impracticality of making extensive rainfall measurements over oceans, a comprehensive description of the space and time variability of global precipitation can only be achieved from the vantage point of space. This presentation will examine current capabilities in space-borne rainfall measurements, highlight scientific and practical benefits derived from these observations to date, and provide an overview of the multi-national Global Precipitation Measurement (GPM) Mission scheduled to bc launched in the early next decade.

  9. Use of urease-bromothymol blue-agar method for large-scale testing of urine on grain and seeds.

    PubMed

    Valdes, P A; Ziobro, G C; Ferrera, R S

    1996-01-01

    The current AOAC method (963.28) for large-scale (50 g) testing of urine on grain is based on the reaction of sodium in urine with magnesium uranyl acetate. Detection of sodium suggests that urine is present and that a test for urea is appropriate. Urea is detected with urease-bromothymol blue-paper and is confirmed through its reaction with xanthydrol to form dixanthylurea crystals, which are detected microscopically. The initial nonspecific test for sodium can be influenced by the presence of salt or other sodium compounds. Furthermore, the magnesium uranyl acetate spray used in Method 963.28 potentially exposes the analyst to the aerosol of a volatile, toxic uranium compound. Excess reagents and analyzed test portions must be disposed of as radioactive waste. In addition, Method 963.28 requires several steps to determine the presence of urea. The alternative AOAC method (972.41) tests for the presence of urea from urine on individual seeds. Urea is enzymatically decomposed to ammonia and carbon dioxide by urease. Liberated ammonia shifts the pH, changing the color of the indicator in the agar from yellow to blue. This study adapts Method 972.41 to larger test samples. Up to 25 g grains and seeds are sprayed with urease test agar instead of being individually immersed in the urease test agar. The modified method was used to analyze urea on seeds and grains of 24 plants from 4 families. The method has a limit of detection of one seed contaminated with 1 microgram urea. PMID:8757445

  10. Final report from the Committee on Antimicrobial Susceptibility Testing, Japanese Society of Chemotherapy, on the agar dilution method (2007).

    PubMed

    Nagayama, Ariaki; Yamaguchi, Keizo; Watanabe, Kunitomo; Tanaka, Masatoshi; Kobayashi, Intetsu; Nagasawa, Zenzo

    2008-10-01

    In 1968, the agar dilution method was developed as an independent Japanese method for measuring the minimal inhibitory concentration (MIC) of antimicrobial agents. As this method differed in a few respects from the MIC measurement methods used in other countries, it was revised in 1981, by a committee headed by Susumu Mitsuhashi, and the revised method (Chemotherapy 29:76-79, 1981) has been used since then. In 1979, an agar dilution method for measuring the MIC of anaerobes was developed by a committee chaired by Nozomu Kosakai (Chemotherapy 27:559-561, 1979). In 1990, a committee headed by Sachiko Goto approved a broth microdilution method for nonfastidious bacteria (Chemotherapy 38:102-105, 1990). Later, a committee headed by Atsushi Saito examined media that would be suitable for nonfastidious bacteria and fastidious bacteria, and they endeavored to prepare a broth microdilution method for anaerobic bacteria. In this context, a new broth microdilution method was proposed at the 40th Annual Meeting of the Japanese Society of Chemotherapy (JSC) in Nagoya in 1992, and the proposal was adopted as the standard JSC method after some modification (Chemotherapy 41: 183-189, 1993). The agar dilution method has remained unrevised for approximately 20 years. A proposal to review this method was recently made, and the 2007 Committee on Antimicrobial Susceptibility Testing was formed, comprising the JSC members listed below. Under the auspices of this committee, the method revised in 1981 was reviewed in comparison to the international standard method (Clinical and Laboratory Standards Institute [CLSI] method). PMID:18936894

  11. Optimization of modified Middlebrook 7H11 agar for isolation of Mycobacterium bovis from raw milk cheese.

    PubMed

    Forgrave, R; Donaghy, J A; Fisher, A; Rowe, M T

    2014-10-01

    Reports have highlighted the absence of contemporary peer reviewed publications pertaining to Mycobacterium bovis culture from raw milk and cheese. By replicating traditional methods, cheese-making methodology and equipment were devised to produce Cheddar (n = 6) and Caerphilly (n = 3) artificially contaminated with M. bovis (three genotypes) under stringent laboratory-containment guidelines for handling hazardous microbiological material. Middlebrook 7H11, modified for M. bovis isolation, was assessed for capacity to enumerate M. bovis despite changing cheese microflora and prolonged M. bovis exposure to the cheese matrix using maturing cheese test portions (n = 63; up to 16 weeks). Malachite green (MG) containing media isolated M. bovis at significantly (P < 0·05) lower levels than unmodified Middlebrook 7H11 agar despite MG being a common adjunct of Middlebrook 7H11 agar modified for M. bovis growth. Subsequently, a selective MG-free Middlebrook 7H11 agar modified using haemolysed red cells and calf serum was demonstrated as the best performing (P < 0·05) medium for recovery of M. bovis from typical UK cheese types, Cheddar and Caerphilly. Significance and impact of the study: Following increased M. bovis infection of UK cattle, the risk posed to consumers from consumption of unpasteurized milk and dairy products has changed. Furthermore, published methods for the culture and molecular detection of M. bovis in raw milk products are limited. Cheese-making protocols and M. bovis culture media reported here provide tools for further investigation of M. bovis survival during all stages of cheese manufacture and could inform future assessment of the risk to consumers from M. bovis contamination of unpasteurized dairy products. PMID:24888395

  12. Inaccuracy of the Disk Diffusion Method Compared with the Agar Dilution Method for Susceptibility Testing of Campylobacter spp.

    PubMed Central

    Kotilainen, Pirkko; Puukka, Pauli; Nakari, Ulla-Maija; Siitonen, Anja; Eerola, Erkki; Huovinen, Pentti; Hakanen, Antti J.

    2012-01-01

    The agar dilution method has been standardized by the CLSI for the susceptibility testing of Campylobacter species, and according to these standards, the disk diffusion method should be used only in screening for macrolide and ciprofloxacin resistance. Nevertheless, the disk diffusion test is currently widely used, since it is easy to perform in clinical microbiology laboratories. In this study, the disk diffusion method was compared to the agar dilution method by analyzing the in vitro activities of seven antimicrobial agents against 174 Campylobacter strains collected in Finland between 2003 and 2008. Recommendations of the CLSI were followed using Mueller-Hinton agar plates with 5% of sheep blood. For each strain, the disk diffusion tests were performed two to four times. Of the 33 erythromycin-resistant strains (MIC, ≥16 μg/ml), 24 (73%) constantly showed a 6-mm erythromycin inhibition zone (i.e., no inhibition), while for seven strains the inhibition zone varied from 6 to 44 mm in repeated measurements. Among the 141 erythromycin-susceptible strains (MIC, <16 μg/ml), erythromycin inhibition zones varied between 6 and 61 mm. Of the 87 ciprofloxacin-resistant strains, 47 (54%) showed 6-mm inhibition zones, while 40 strains showed inhibition zones between 6 and 60 mm. Significant differences between the repetitions were observed in the disk diffusion for all antimicrobial agents and all strains except for the macrolide-resistant strains regarding the macrolides. For 17 (10%) strains, the variation in repeated measurements was substantial. These results show that the disk diffusion method may not be a reliable tool for the susceptibility testing of Campylobacter spp. Further studies are needed to assess whether the disk diffusion test could be improved or whether all susceptibilities of campylobacters should be tested using an MIC-based method. PMID:22075583

  13. Enumerating actinomycetes in compost bioaerosols at source—Use of soil compost agar to address plate 'masking'

    NASA Astrophysics Data System (ADS)

    Taha, M. P. M.; Drew, G. H.; Tamer Vestlund, A.; Aldred, D.; Longhurst, P. J.; Pollard, S. J. T.

    Actinomycetes are the dominant bacteria isolated from bioaerosols sampled at composting facilities. Here, a novel method for the isolation of actinomycetes is reported, overcoming masking of conventional agar plates, as well as reducing analysis time and costs. Repeatable and reliable actinomycetes growth was best achieved using a soil compost media at an incubation temperature of 44 °C and 7 days' incubation. The results are of particular value to waste management operators and their advisors undertaking regulatory risk assessments that support environmental approvals for compost facilities.

  14. Novel Haloperoxidase from the Agaric Basidiomycete Agrocybe aegerita Oxidizes Aryl Alcohols and Aldehydes

    PubMed Central

    Ullrich, René; Nüske, Jörg; Scheibner, Katrin; Spantzel, Jörg; Hofrichter, Martin

    2004-01-01

    Agrocybe aegerita, a bark mulch- and wood-colonizing basidiomycete, was found to produce a peroxidase (AaP) that oxidizes aryl alcohols, such as veratryl and benzyl alcohols, into the corresponding aldehydes and then into benzoic acids. The enzyme also catalyzed the oxidation of typical peroxidase substrates, such as 2,6-dimethoxyphenol (DMP) or 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS). A. aegerita peroxidase production depended on the concentration of organic nitrogen in the medium, and highest enzyme levels were detected in the presence of soybean meal. Two fractions of the enzyme, AaP I and AaP II, which had identical molecular masses (46 kDa) and isoelectric points of 4.6 to 5.4 and 4.9 to 5.6, respectively (corresponding to six different isoforms), were identified after several steps of purification, including anion- and cation-exchange chromatography. The optimum pH for the oxidation of aryl alcohols was found to be around 7, and the enzyme required relatively high concentrations of H2O2 (2 mM) for optimum activity. The apparent Km values for ABTS, DMP, benzyl alcohol, veratryl alcohol, and H2O2 were 37, 298, 1,001, 2,367 and 1,313 μM, respectively. The N-terminal amino acid sequences of the main AaP II spots blotted after two-dimensional gel electrophoresis were almost identical and exhibited almost no homology to the sequences of other peroxidases from basidiomycetes, but they shared the first three amino acids, as well as two additional amino acids, with the heme chloroperoxidase (CPO) from the ascomycete Caldariomyces fumago. This finding is consistent with the fact that AaP halogenates monochlorodimedone, the specific substrate of CPO. The existence of haloperoxidases in basidiomycetous fungi may be of general significance for the natural formation of chlorinated organic compounds in forest soils. PMID:15294788

  15. Selective gel system for permeability profile control

    SciTech Connect

    Shu, P.

    1990-02-27

    This patent describes a process for closing pores in a more permeable zone of a formation. It comprises: placing into an aqueous solution a first composition sufficient to form ex-situ a size selective, shear thinning first gel which comprises a xanthan biopolymer, and a transitional metal ion; placing into the aqueous solution a second composition sufficient to form thermally a second in-situ gel which is substantially more resistant to formation conditions than the first gel. The composition comprises an aldehyde, and a phenolic compound; allowing the aqueous solution sufficient time to form the ex-situ gel; and injecting the aqueous solution containing the gel into the permeable zone where it reheals, is heated by the formation and thereafter forms a solid gel substantially more resistant to formation conditions than the first gel.

  16. Mechanical stability analysis of carrageenan-based polymer gel for magnetic resonance imaging liver phantom with lesion particles

    PubMed Central

    In, Eunji; Naguib, Hani; Haider, Masoom

    2014-01-01

    Abstract. Medical imaging is an effective technique used to detect and prevent disease in cancer research. To optimize medical imaging, a calibration medium or phantom with tissue-mimicking properties is required. Although the feasibility of various polymer gel materials has previously been studied, the stability of the gels’ properties has not been investigated. In this study, we fabricated carrageenan-based polymer gel to examine the stability of its properties such as density, conductivity, permittivity, elastic modulus, and T1 and T2 relaxation times over six weeks. We fabricated eight samples with different carrageenan and agar concentrations and found that the density, elastic modulus, and compressive strength fluctuated with no specific pattern. The elastic modulus in sample 4 with 3 wt. % carrageenan and 1.5 wt. % agar fluctuated from 0.51 to 0.64 MPa in five weeks. The T1 and T2 relaxation times also varied by 23% to 29%. We believe that the fluctuation of these properties is related to the change in water content of the sample due to cycles of water expulsion and absorption in their containers. The fluctuation of the properties should be minimized to achieve accurate calibration over the shelf life of the phantom and to serve as the standard for quality assurance. Furthermore, a full liver phantom with spherical lesion particles was fabricated to demonstrate the potential for phantom production. PMID:26158073

  17. Silica Precipitation and Lithium Sorption

    SciTech Connect

    Jay Renew

    2015-09-20

    This file contains silica precipitation and lithium sorption data from the project. The silica removal data is corrected from the previous submission. The previous submission did not take into account the limit of detection of the ICP-MS procedure.

  18. Electrical precipitation apparatus and method

    SciTech Connect

    Furlong, D.A.

    1984-11-06

    An electrostatic precipitator having improved collection efficiency for suspended particles having either high or low electrical resistivities is provided. The precipitator utilizes porous collecting surfaces which permit passage of gas while retaining suspended particles and means are provided to create an electrostatic field causing the particles to migrate toward the collecting surfaces. According to the invention, only a portion of the inlet gas flow to the precipitator, sufficient to provide aerodynamic forces to facilitate adherence of the particles to the collecting surface, is drawn through the porous collecting surfaces with the remainder of the gas flow being essentially parallel to such surfaces. The two gas streams are separately withdrawn and may be combined to provide a clean gas effluent. The invention also provides an improved method for removing suspended particles from gases by electrical precipitation.

  19. Evaluation of Coupled Precipitator Two

    SciTech Connect

    Stone, M.E.

    1999-11-08

    The offline testing of the Coupled Precipitator Two (CP-2) has been completed. The tests were conducted and are documented. The tests were conducted at an offline test rack near the Drain Tube Test Stand facility in 672-T.

  20. Identifying Anomality in Precipitation Processes

    NASA Astrophysics Data System (ADS)

    Jiang, P.; Zhang, Y.

    2014-12-01

    Safety, risk and economic analyses of engineering constructions such as storm sewer, street and urban drainage, and channel design are sensitive to precipitation storm properties. Whether the precipitation storm properties exhibit normal or anomalous characteristics remains obscure. In this study, we will decompose a precipitation time series as sequences of average storm intensity, storm duration and interstorm period to examine whether these sequences could be treated as a realization of a continuous time random walk with both "waiting times" (interstorm period) and "jump sizes" (average storm intensity and storm duration). Starting from this viewpoint, we will analyze the statistics of storm duration, interstorm period, and average storm intensity in four regions in southwestern United States. We will examine whether the probability distribution is temporal and spatial dependent. Finally, we will use fractional engine to capture the randomness in precipitation storms.

  1. Some Statistics of Instantaneous Precipitation.

    NASA Astrophysics Data System (ADS)

    Jones, Douglas M. A.; Wendland, Wayne M.

    1984-09-01

    Known sources of data from arrays of instantaneous precipitation intensity recorders in southern Germany, east-central Illinois, northeastern Illinois, central Florida, and Hilo, Hawaii are obtained. These data are analyzed for line averages of the percent frequency of occurrence of the exceedance of selected threshold precipitation intensities. The correlation coefficients of the precipitation intensity at sites at varying distances from a reference site are determined. The decay in correlation is found to be a function of climatic region and the type of precipitation: showery or continuous. Showery rains are found to be essentially uncorrelated about 12 km from the reference site while continuous rain exhibits no correlation beyond about 50 km.Single-station intensity data collected at Urbana, Illinois; Paris, France; Inyanga, Zimbabwe; Bogor, Indonesia; Reading, United Kingdom; Island Beach, New Jersey; Miami, Florida; Franklin, North Carolina; and Majuro, Marshall Islands, are compared.

  2. Heavy Precipitation Events in Lithuania

    NASA Astrophysics Data System (ADS)

    Bukantis, A.; Rimkus, E.; Kažys, J.

    2010-09-01

    Analysis of heavy precipitation events in Lithuania is presented in this work. Research was divided into two parts. Spatial distribution and dynamic of heavy precipitation events in Lithuania during observation period (1961-2008) is presented in the first part and climate predictions for XXI century according to outputs of CCLM model are in the second. Daily data from 17 meteorological stations were used for the analysis of heavy precipitation events in Lithuania. Research covers period from 1961 to 2008. Annual and seasonal heavy precipitation values and the recurrence of extreme daily and 3-day precipitation events were analyzed. Spatial distribution of heavy precipitation events in Lithuania was determined; the trends of such precipitation recurrence were identified. Also, daily and 3-day annual maxima probabilities were calculated using the Generalized Extreme Value (GEV) distribution. 10, 30 and 100 years return period was analyzed. Finally, atmospheric circulation processes during heavy precipitation events were described using the adapted Hess & Brezowski macrocirculation form classification Predictions of changes of heavy precipitation recurrence in Lithuania are also presented in this study. Output data of the regional climate model CCLM (COSMO - Climate Limited-area Model) for the period 1971-2100 were used. Predictions were based on A1B and B1 emission scenarios. Despite of relatively small area and quite negligible differences in altitude there are significant unevenness in spatial distribution of heavy precipitation events in Lithuania. The mean annual number of cases when daily precipitation amount exceeded 10 mm fluctuates from 12.4 to 21.9 and from 5.3 to 10.5 when 3-day precipitation exceeded 20 mm. The probability of maximum precipitation amount for 10 year return period appears very familiar to spatial distribution of heavy precipitation recurrence: the highest values can be expected in the western part (55-60 mm daily and 75-85 mm in 3-days

  3. Environmental Radioactivity, Temperature, and Precipitation.

    ERIC Educational Resources Information Center

    Riland, Carson A.

    1996-01-01

    Reports that environmental radioactivity levels vary with temperature and precipitation and these effects are due to radon. Discusses the measurement of this environmental radioactivity and the theory behind it. (JRH)

  4. The 2014 Silba Precipitation Extreme

    NASA Astrophysics Data System (ADS)

    Rasol, Dubravka; Ólafsson, Haraldur

    2015-04-01

    On 30 July 2014 a 24 h precipitation record of 218 mm was set at the island of Silba in the N-Adriatic Sea. The precipitation was of convective nature and significantly less precipitation was recorded only small distances away, at the coast of mainland Croatia. The event is reproduced numerically and discussed in terms of dynamics and predictability. On a large scale, the precipitation extreme was associated with a slow-moving upper tropospheric low that formed over the N-Atlantic several days earlier. At lower levels, there were humid mediterranean airmasses. On a smaller scale, there are indications that the extreme convection may have been triggered by an orographic disturbance.

  5. Oceanic Precipitation Measurement - Surface Validation

    NASA Astrophysics Data System (ADS)

    Klepp, Christian

    2013-04-01

    State-of-the-art satellite derived and reanalysis based precipitation climatologies still show remarkably large differences in frequency, amount, intensity, variability and temporal behavior of precipitation over the oceans. Additionally so far appropriate in-situ validation instruments were not available for shipboard use. The uncertainties are largest for light precipitation within the ITCZ and subtropics and for cold season high-latitude precipitation including mix-phase and snowfall. Hence, a long-term issue on which IPWG and GPM-GV is urging more attention is the provision of high quality surface validation data in oceanic areas using innovative ship-based instruments. Precipitation studies would greatly benefit from systematic dataset collection and analysis as such data could also be used to constrain precipitation retrievals. To achieve this goal, the KlimaCampus and Max Planck Institute for Meteorology in Hamburg, Germany funded this project that uses automated shipboard optical disdrometers, called Eigenbrodt ODM470, that are capable of measuring liquid and solid precipitation using drop size distributions in minute intervals on moving ships with high accuracy even under high wind speeds and rough sea states. Since the project start in 2009 the statistical basis for a conclusive validation has significantly improved with comprehensive data collection of more than 3 million minutes of precipitation measurements onboard six ships. Currently, six ODM470 instrument systems are available of which three are long-term mounted onboard the German research icebreaker R/V Polarstern (Alfred Wegner Institut) since June 2010, on R/V Akademik Ioffe (P.P.Shirshov Institute of Oceanology, Russian Academy of Sciences, Moscow, Russia) since September 2010 and on R/V Maria S. Merian (Brise Research, University of Hamburg) since December 2011. Three instruments are used for additional short-term shipboard campaigns and intercomparison projects. The core regions for these

  6. Gel synthesis of magnesium silicates: A 29Si magic angle spinning NMR study

    NASA Astrophysics Data System (ADS)

    Hartman, J. Stephen; Millard, Roberta L.

    1990-01-01

    The formation of the magnesium silicate minerals forsterite, enstatite, and roedderite by heating of amorphous “protosilicate” gels precipitated from aqueous solution has been studied by 29Si MAS nmr. Gentle drying of the hydrogels at 110° C gives materials with broad nmr signals that do not differ appreciably with preparation conditions, but the minerals formed by heating at 750° C or higher are greatly dependent on the precipitation and washing conditions of the original gel. The rare mineral roedderite, best known from studies of unequilibrated enstatite chondrite meteorites, becomes a major species along with forsterite when the hydrogels are washed with sodium hydroxide solution before drying and heating to 750° C.

  7. Global Precipitation Measurement (GPM) implementation

    NASA Astrophysics Data System (ADS)

    Neeck, Steven P.; Kakar, Ramesh K.; Azarbarzin, Ardeshir A.; Hou, Arthur Y.

    2010-10-01

    The Global Precipitation Measurement (GPM) mission will provide enhanced space-based precipitation measurements with sufficient coverage, spatial resolution, temporal sampling, retrieval accuracy, and microphysical information to advance the understanding of Earth's water and energy cycle and to improve predictions of its climate, weather, and hydrometeorological processes. Such improvements will in turn improve decision support systems in broad societal applications (e.g. water resource management, agriculture, transportation, etc). GPM is a partnership between NASA and the Japan Aerospace Exploration Agency (JAXA), building upon their highly successful partnership on the Tropical Rainfall Measuring Mission (TRMM). The GPM architecture consists of NASA satellites operating in partnership with other earth-observing satellites and instruments to produce global precipitation science data. The current generation of multi-satellite global precipitation products based on microwave/infrared sensors from uncoordinated satellite missions has for its anchor the TRMM precipitation radar and the TRMM Microwave Imager measurements over the tropics and subtropics (+/- 35 degrees latitude), with a mean sampling time of approximately 17 hours. The GPM mission will deploy a spaceborne Core Observatory as a reference standard to unify a space constellation of research and operational microwave sensors aimed at providing uniformly calibrated precipitation measurements globally every 2-4 hours. The Core Observatory measurements will provide, for the first time, quantitative information on precipitation particle size distribution needed for improving the accuracy of precipitation estimates by microwave radiometers and radars. In addition, the GPM will also include a second microwave radiometer and a Tracking and Data Relay Satellite (TDRS) communications subsystem for near real time data relay for a future partner-provided constellation satellite. This second GPM Microwave Imager (GMI

  8. Optimization of Pulsed-field Gel Electrophoresis Procedure for Bacillus cereus.

    PubMed

    Zhang, Hui Juan; Pan, Zhuo; Wei, Jian Chun; Zhang, En Min; Cai, Hong; Liang, Xu Dong; Li, Wei

    2016-03-01

    In order to develop a rapid and reliable method for B. cereus genotyping, factors influencing PFGE results, including preparation of bacterial cells embedded in agarose, lysis of embedded cells, enzymatic digestion of intact genomic DNA, and electrophoresis parameters allowing for reproducible and meaningful DNA fragment separation, were controlled. Optimal cellular growth (Luria-Bertani agar plates for 12-18 h) and lysis conditions (4 h incubation with 500 µg/mL lysozyme) produced sharp bands on the gel. Restriction enzyme NotI was chosen as the most suitable. Twenty-two isolates were analyzed by NotI digestion, using three electrophoretic parameters (EPs). The EP-a was optimal for distinguishing between isolates. The optimized protocol could be completed within 40 h which is a significant improvement over the previous methods. PMID:27109136

  9. Visual Recognition of Aliphatic and Aromatic Amines Using a Fluorescent Gel: Application of a Sonication-Triggered Organogel.

    PubMed

    Pang, Xuelei; Yu, Xudong; Lan, Haichuang; Ge, Xiaoting; Li, Yajuan; Zhen, Xiaoli; Yi, Tao

    2015-06-24

    A naphthalimide-based fluorescent gelator (N1) containing an alkenyl group has been designed and characterized. This material is able to gelate alcohols via a precipitate-to-gel transformation when triggered with ultrasound for less than 2 min (S-gel). The gelation process in n-propanol was studied by means of absorption, fluorescence, and IR spectra, scanning electron microscopy (SEM) images, and X-ray diffraction patterns. The fluorescence intensity of N1 decreased during the gelation process in a linear relationship with the sonication time. The S-gel of N1 could be used to sense aliphatic and aromatic amines by measuring the change in the signal output. For example, the addition of propylamine to the S-gel of N1 resulted in a dramatic enhancement of the fluorescence intensity, accompanied by a gel-to-sol transition. On the contrary, when the S-gel of N1 was treated with aromatic amines such as aniline, fluorescence was quenched and there was no gel collapse. The sensing mechanisms were studied by (1)H NMR, small-angle X-ray scattering, SEM and spectroscopic experiments. It is proposed that isomerization of the alkenyl group of N1 from the trans to cis form occurs when the S-gel is treated with propylamine, resulting in a gel-sol transition. However, the aromatic aniline molecules prefer to insert into the gel networks of N1 via hydrogen-bonding and charge-transfer interactions, maintaining the gel state. As potential applications, testing strips of N1 were prepared to detect aniline. PMID:26040296

  10. NASA Dual Precipitation Radar Arrives at Goddard

    NASA Video Gallery

    The Dual-frequency Precipitation Radar (DPR) built by the Japan Aerospace Exploration Agency (JAXA) for the Global Precipitation Measurement (GPM) mission's Core Observatory arrived on Friday, Marc...

  11. Biological and chemical detection of fumonisins produced on agar medium by Fusarium verticillioides isolates collected from corn in Sohag, Egypt.

    PubMed

    Aboul-Nasr, M B; Obied-Allah, M R A

    2013-08-01

    Fusarium verticillioides (Sacc.) Nirenberg is among the most common Fusarium species corn pathogens worldwide, and has been recognized as a fumonisin B1 (FB1) and fumonisin B2 (FB2) producer. In the present work, extracts of 58 F. verticillioides isolates from corn samples collected from Sohag Governorate, Egypt, were tested for their biotoxicity and production of fumonisin toxins. Forty-four Fusarium verticillioides isolates out of 58 tested produced FB1 or FB1 and FB2 (15 and 29 isolates, respectively) on potato-sucrose agar medium, detected by TLC, whereas the other 14 isolates did not produce fumonisin toxins. HPLC crude extract analysis confirmed the results from TLC plates. Brine shrimp larvae as well as the Gram-negative bacteria Pseudomonas aeuroginosa showed low bio-sensitivity towards the F. verticillioides crude extract toxicity, whereas the Gram-positive bacteria Bacillus cereus and Bacillus subtilis, especially B. subtilis, showed higher sensitivity towards the tested Fusarium crude extracts. These results enabled us to bio-evaluate and chemically detect fumonisin mycotoxins using a simple agar medium technique. PMID:23760819

  12. Dependence of ablative ability of high-intensity focused ultrasound cavitation-based histotripsy on mechanical properties of agar.

    PubMed

    Xu, Jin; Bigelow, Timothy A; Davis, Gabriel; Avendano, Alex; Shrotriya, Pranav; Bergler, Kevin; Hu, Zhong

    2014-12-01

    Cavitation-based histotripsy uses high-intensity focused ultrasound at low duty factor to create bubble clouds inside tissue to liquefy a region, and provides better fidelity to planned lesion coordinates and the ability to perform real-time monitoring. The goal of this study was to identify the most important mechanical properties for predicting lesion dimensions, among these three: Young's modulus, bending strength, and fracture toughness. Lesions were generated inside tissue-mimicking agar, and correlations were examined between the mechanical properties and the lesion dimensions, quantified by lesion volume and by the width and length of the equivalent bubble cluster. Histotripsy was applied to agar samples with varied properties. A cuboid of 4.5 mm width (lateral to focal plane) and 6 mm depth (along beam axis) was scanned in a raster pattern with respective step sizes of 0.75 and 3 mm. The exposure at each treatment location was either 15, 30, or 60 s. Results showed that only Young's modulus influenced histotripsy's ablative ability and was significantly correlated with lesion volume and bubble cluster dimensions. The other two properties had negligible effects on lesion formation. Also, exposure time differentially affected the width and depth of the bubble cluster volume. PMID:25480051

  13. Determination of in vitro synergy for dual antimicrobial therapy against resistant Neisseria gonorrhoeae using Etest and agar dilution.

    PubMed

    Wind, Carolien M; de Vries, Henry J C; van Dam, Alje P

    2015-03-01

    In response to antimicrobial resistance of Neisseria gonorrhoeae to last-resort extended-spectrum cephalosporins, combination therapy of azithromycin+ceftriaxone is now recommended. Dual therapy can be effective to treat monoresistant strains as well as multidrug-resistant strains, preferably employing the effect of in vitro synergy. As reports on in vitro synergy of azithromycin+ceftriaxone in N. gonorrhoeae are conflicting, in this study an evaluation of this combination was performed using a cross-wise Etest method and agar dilution. Synergy was defined as a fractional inhibitory concentration index (FICI) of ≤0.5. To identify other dual treatment options for gonorrhoea, in vitro synergy was evaluated for 65 dual antimicrobial combinations using Etest. Azithromycin, cefixime, ceftriaxone, colistin, ertapenem, fosfomycin, gentamicin, minocycline, moxifloxacin, rifampicin, spectinomycin and tigecycline were screened for synergy in all possible combinations. No synergy or antagonism was found for any of the 65 combinations. The geometric mean FICI ranged from 0.82 to 2.00. The mean FICI of azithromycin+ceftriaxone was 1.18 (Etest) and 0.55 (agar dilution). The difference between both methods did not result in a difference in interpretation of synergy. Ceftriaxone-resistant strain F89 was tested in all combinations and no synergy was found for any of them. Most importantly, the ceftriaxone minimum inhibitory concentration of F89 was not decreased below the breakpoint with any concentration of azithromycin. PMID:25532741

  14. Malt-yeast extract-sucrose agar, a suitable medium for enumeration and isolation of fungi from silage.

    PubMed Central

    Skaar, I; Stenwig, H

    1996-01-01

    A general medium named malt-yeast extract-sucrose agar (MYSA) containing oxgall was designed. The medium was intended for the enumeration and isolation of molds and yeasts in routine examinations of animal feed stuffs. In this study MYSA was tested as a general medium for mycological examination of silage. The medium was compared with dichloran-rose bengal medium (DRBC) in an examination of more than 500 specimens of big bale grass silage. Selected characteristics of known fungal species commonly isolated from feeds were examined after growth on MYSA and DRBC and on malt extract agar, used as a noninhibitory control medium. MYSA suppressed bacterial growth, without affecting the growth of fungi common in feeds. The fungi growing on MYSA were easily recognized, and the medium seemed to slow radial growth of fungal colonies, which permitted, easy counting. The number of species found was higher on MYSA than on DRBC. When we compared MYSA with DRBC for mycological examination of grass silage samples, MYSA was found to be the medium of choice. PMID:8837416

  15. Advanced Microwave Precipitation Radiometer (AMPR) for remote observation of precipitation

    NASA Technical Reports Server (NTRS)

    Galliano, J. A.; Platt, R. H.

    1990-01-01

    The design, development, and tests of the Advanced Microwave Precipitation Radiometer (AMPR) operating in the 10 to 85 GHz range specifically for precipitation retrieval and mesoscale storm system studies from a high altitude aircraft platform (i.e., ER-2) are described. The primary goals of AMPR are the exploitation of the scattering signal of precipitation at frequencies near 10, 19, 37, and 85 GHz together to unambiguously retrieve precipitation and storm structure and intensity information in support of proposed and planned space sensors in geostationary and low earth orbit, as well as storm-related field experiments. The development of AMPR will have an important impact on the interpretation of microwave radiances for rain retrievals over both land and ocean for the following reasons: (1) A scanning instrument, such as AMPR, will allow the unambiguous detection and analysis of features in two dimensional space, allowing an improved interpretation of signals in terms of cloud features, and microphysical and radiative processes; (2) AMPR will offer more accurate comparisons with ground-based radar data by feature matching since the navigation of the ER-2 platform can be expected to drift 3 to 4 km per hour of flight time; and (3) AMPR will allow underflights of the SSM/I satellite instrument with enough spatial coverage at the same frequencies to make meaningful comparisons of the data for precipitation studies.

  16. Metal-silica sol-gel materials

    NASA Technical Reports Server (NTRS)

    Stiegman, Albert E. (Inventor)

    2002-01-01

    The present invention relates to a single phase metal-silica sol-gel glass formed by the co-condensation of a transition metal with silicon atoms where the metal atoms are uniformly distributed within the sol-gel glass as individual metal centers. Any transition metal may be used in the sol-gel glasses. The present invention also relates to sensor materials where the sensor material is formed using the single phase metal-silica sol-gel glasses. The sensor materials may be in the form of a thin film or may be attached to an optical fiber. The present invention also relates to a method of sensing chemicals using the chemical sensors by monitoring the chromatic change of the metal-silica sol-gel glass when the chemical binds to the sensor. The present invention also relates to oxidation catalysts where a metal-silica sol-gel glass catalyzes the reaction. The present invention also relates to a method of performing oxidation reactions using the metal-silica sol-gel glasses. The present invention also relates to organopolymer metal-silica sol-gel composites where the pores of the metal-silica sol-gel glasses are filled with an organic polymer polymerized by the sol-gel glass.

  17. Precipitation in topographically diverse regions

    NASA Astrophysics Data System (ADS)

    Tarboton, David

    A 1991 AGU Fall Meeting session, Precipitation in Topographically Diverse Regions, focused on the understanding and modeling of precipitation in regions with significant topography, concentrating on the effect of topography on precipitation. Contributions ranged from detailed mesoscale atmospheric models to statistical approaches.Two papers presented detailed physical modeling. A. P. Barros and D. P. Lettenmaier described their work, consisting of a threedimensional finite element model based on the measurement of moist static energy. Application of the model in the Olympic and Cascades mountains demonstrated its potential to model monthly precipitation totals to within 15%. F. Giorgi described some of the work being done at NCAR that is focusing on the regional impacts of global climate change. This work uses a mesoscale meteorological model (Penn State/NCAR MM4) embedded within a general circulation model. There were three papers from the USGS/Colorado State group that described work involving the RHEA-CSU orographic precipitation model that has been coupled with the USGS/s distributed parameter Precipitation Runoff Modeling System (PRMS). The orographic precipitation model has been integrated into a geographic information system to facilitate the use of digital elevation data. The PRMS is based on the concept of hydrologic response units, and the results presented illustrated the scale's sensitivity to these. When rectangular boxes were used instead of the usual response units defined by streams and drainage divides, there was no appreciable degradation in the quality of the simulation. The size and number of response units appears to be more crucial than whether they are demarcated by drainage divides and streams or simply arbitrary.

  18. Chemical Data for Precipitate Samples

    USGS Publications Warehouse

    Foster, Andrea L.; Koski, Randolph A.

    2008-01-01

    During studies of sulfide oxidation in coastal areas of Prince William Sound in 2005, precipitate samples were collected from onshore and intertidal locations near the Ellamar, Threeman, and Beatson mine sites (chapter A, fig. 1; table 7). The precipitates include jarosite and amorphous Fe oxyhydroxide from Ellamar, amorphous Fe oxyhydroxide from Threeman, and amorphous Fe oxyhydroxide, ferrihydrite, and schwertmannite from Beatson. Precipitates occurring in the form of loose, flocculant coatings were harvested using a syringe and concentrated in the field by repetitive decanting. Thicker accumulations were either scraped gently from rocks using a stainless steel spatula or were scooped directly into receptacles (polyethylene jars or plastic heavy-duty zippered bags). Most precipitate samples contain small amounts of sedimentary detritus. With three jarosite-bearing samples from Ellamar, an attempt was made to separate the precipitate from the heavy-mineral fraction of the sediment. In this procedure, the sample was stirred in a graduated cylinder containing deionized water. The jarosite-rich suspension was decanted onto analytical filter paper and air dried before analysis. Eleven precipitate samples from the three mine sites were analyzed in laboratories of the U.S. Geological Survey (USGS) in Denver, Colorado (table 8). Major and trace elements were determined by inductively coupled plasma-mass spectrometry following multiacid (HCl-HNO3-HClO4-HF) digestion (Briggs and Meier, 2002), except for mercury, which was analyzed by cold-vapor atomic absorption spectroscopy (Brown and others, 2002a). X-ray diffraction (XRD) analyses were performed on powdered samples (<200 mesh) by S. Sutley of the USGS. Additional details regarding sample preparation and detection limits are found in Taggert (2002). Discussions of the precipitate chemistry and associated microbial communities are presented in Koski and others (2008) and Foster and others (2008), respectively.

  19. Are hourly precipitation extremes increasing faster than daily precipitation extremes?

    NASA Astrophysics Data System (ADS)

    Barbero, Renaud; Fowler, Hayley; Blenkinsop, Stephen; Lenderink, Geert

    2016-04-01

    Extreme precipitation events appear to be increasing with climate change in many regions of the world, including the United States. These extreme events have large societal impacts, as seen during the recent Texas-Oklahoma flooding in May 2015 which caused several billion in damages and left 47 deaths in its path. Better understanding of past changes in the characteristics of extreme rainfall events is thus critical for reliable projections of future changes. Although it has been documented in several studies that daily precipitation extremes are increasing across parts of the contiguous United States, very few studies have looked at hourly extremes. However, this is of primary importance as recent studies on the temperature scaling of extreme precipitation have shown that increases above the Clausius-Clapeyron (~ 7% °C‑1) are possible for hourly precipitation. In this study, we used hourly precipitation data (HPD) from the National Climatic Data Center and extracted more than 1,000 stations across the US with more than 40 years of data spanning the period 1950-2010. As hourly measurements are often associated with a range of issues, the data underwent multiple quality control processes to exclude erroneous data. While no significant changes were found in annual maximum precipitation using both hourly and daily resolution datasets, significant increasing trends in terms of frequency of episodes exceeding present-day 95th percentiles of wet hourly/daily precipitation were observed across a significant portion of the US. The fraction of stations with significant increasing trends falls outside the confidence interval range during all seasons but the summer. While less than 12% of stations exhibit significant trends at the daily scale in the wintertime, more than 45% of stations, mostly clustered in central and Northern United States, show significant increasing trends at the hourly scale. This suggests that short-duration storms have increased faster than daily

  20. Dust particles precipitation in AC/DC electrostatic precipitator

    NASA Astrophysics Data System (ADS)

    Jaworek, A.; Marchewicz, A.; Krupa, A.; Sobczyk, A. T.; Czech, T.; Antes, T.; Śliwiński, Ł.; Kurz, M.; Szudyga, M.; Rożnowski, W.

    2015-10-01

    Submicron and nanoparticles removal from flue or exhaust gases remain still a challenge for engineers. The most effective device used for gas cleaning in power plants or industry is electrostatic precipitator, but its collection efficiency steeply decreases for particles smaller than 1 micron. In this paper, fractional collection efficiency of two-stage electrostatic precipitator comprising of alternating electric field charger and DC supplied parallel-plate collection stage has been investigated. The total number collection efficiency for PM2.5 particles was higher than 95% and mass collection efficiency >99%. Fractional collection efficiency for particles between 300 nm and 1 μm was >95%.

  1. The Global Precipitation Measurement Mission

    NASA Astrophysics Data System (ADS)

    Jackson, Gail

    2014-05-01

    The Global Precipitation Measurement (GPM) mission's Core satellite, scheduled for launch at the end of February 2014, is well designed estimate precipitation from 0.2 to 110 mm/hr and to detect falling snow. Knowing where and how much rain and snow falls globally is vital to understanding how weather and climate impact both our environment and Earth's water and energy cycles, including effects on agriculture, fresh water availability, and responses to natural disasters. The design of the GPM Core Observatory is an advancement of the Tropical Rainfall Measuring Mission (TRMM)'s highly successful rain-sensing package [3]. The cornerstone of the GPM mission is the deployment of a Core Observatory in a unique 65o non-Sun-synchronous orbit to serve as a physics observatory and a calibration reference to improve precipitation measurements by a constellation of 8 or more dedicated and operational, U.S. and international passive microwave sensors. The Core Observatory will carry a Ku/Ka-band Dual-frequency Precipitation Radar (DPR) and a multi-channel (10-183 GHz) GPM Microwave Radiometer (GMI). The DPR will provide measurements of 3-D precipitation structures and microphysical properties, which are key to achieving a better understanding of precipitation processes and improving retrieval algorithms for passive microwave radiometers. The combined use of DPR and GMI measurements will place greater constraints on possible solutions to radiometer retrievals to improve the accuracy and consistency of precipitation retrievals from all constellation radiometers. Furthermore, since light rain and falling snow account for a significant fraction of precipitation occurrence in middle and high latitudes, the GPM instruments extend the capabilities of the TRMM sensors to detect falling snow, measure light rain, and provide, for the first time, quantitative estimates of microphysical properties of precipitation particles. The GPM Core Observatory was developed and tested at NASA

  2. Eocene precipitation: a global monsoon?

    NASA Astrophysics Data System (ADS)

    Greenwood, D. R.; Huber, M.

    2011-12-01

    The Eocene was the warmest part of the Cenozoic, with warm climates extending across all continents including Antarctica, and extending into the Arctic. Substantive paleobotanical evidence (leaf floras and palynofloras) has demonstrated the existence of broadleaf and coniferous polar forests - a circumpolar rain forest - at both poles. North and South America, Australia, and China in the Eocene were well-forested and humid continents, in contrast to today where 2/3 of these continental areas are arid or semi-arid and lack forests. Each of these regions reflect past climate states - mesothermal moist climates with low thermal seasonality at high latitudes - that have no analog in the modern world. Recent modelling and paleontological proxy data, however, is revealing a high degree of seasonality to precipitation for these continental areas, indicating a monsoon-type precipitation regime may have characterized Eocene 'greenhouse climates'. Paleobotanical proxies offer 2 methods for estimated paleo-precipitation; leaf physiognomy (including both CLAMP and leaf area analysis), and quantitative analysis of nearest living relatives ('NLRs') of macrofloras. Presented here are 1) an updated leaf area analysis calibration with smaller errors of the estimate than previously provided, and 2) analyses of fossil floras from North America, Canada, the Arctic, and Australia. Analysis of the Canadian floras indicate moist climates (MAP >100cm/a) in the early and middle Eocene at middle and high paleolatitudes. Precipitation for western North America at mid-latitudes is also estimated as high, but a seasonally dry interior and south-east is indicated. For Australia, precipitation in the south-east is estimated >120 cm/a, but the macrofloras indicate a drier interior (MAP ~60 cm/a) and seasonal drought, contradicting estimates of ~120 cm/a based on NLR analysis of pollen floras. Recently published data show that north-eastern China in the Eocene had a monsoonal-type seasonality for

  3. Automated apparatus for producing gradient gels

    DOEpatents

    Anderson, Norman L.

    1986-01-01

    Apparatus for producing a gradient gel which serves as a standard medium for a two-dimensional analysis of proteins, the gel having a density gradient along its height formed by a variation in gel composition, with the apparatus including first and second pumping means each including a plurality of pumps on a common shaft and driven by a stepping motor capable of providing small incremental changes in pump outputs for the gel ingredients, the motors being controlled, by digital signals from a digital computer, a hollow form or cassette for receiving the gel composition, means for transferring the gel composition including a filler tube extending near the bottom of the cassette, adjustable horizontal and vertical arms for automatically removing and relocating the filler tube in the next cassette, and a digital computer programmed to automatically control the stepping motors, arm movements, and associated sensing operations involving the filling operation.

  4. Automated apparatus for producing gradient gels

    DOEpatents

    Anderson, N.L.

    1983-11-10

    Apparatus for producing a gradient gel which serves as a standard medium for a two-dimensional analysis of proteins, the gel having a density gradient along its height formed by a variation in gel composition, with the apparatus including first and second pumping means each including a plurality of pumps on a common shaft and driven by a stepping motor capable of providing small incremental changes in pump outputs for the gel ingredients, the motors being controlled, by digital signals from a digital computer, a hollow form or cassette for receiving the gel composition, means for transferring the gel composition including a filler tube extending near the bottom of the cassette, adjustable horizontal and vertical arms for automatically removing and relocating the filler tube in the next cassette, and a digital computer programmed to automatically control the stepping motors, arm movements, and associated sensing operations involving the filling operation.

  5. Selective gel system for permeability profile control

    SciTech Connect

    Shu, P.

    1990-10-16

    This patent describes a selective gel for closing pores in a more permeable zone of a formation. It comprises: an aqueous solution of a first composition sufficient to form ex-situ a size selective, shear thinning first gel which comprises a xanthan biopolymer, and a transitional metal ion; and an aqueous solution of a second composition sufficient to form thermally a second in-situ gel that which comprises and aldehyde, and a phenolic compound which solutions are combined and allowed to form a shearable, rehealable ex-situ gel which can be injected into the permeable zone where it reheals when heated by the formation and thereafter forms a solid gel substantially more resistant to formation conditions than the first gel.

  6. GEM printer: 3D gel printer for free shaping of functional gel engineering materials

    NASA Astrophysics Data System (ADS)

    Furukawa, Hidemitsu; Muroi, Hisato; Yamamoto, Kouki; Serizawa, Ryo; Gong, Jin

    2013-04-01

    In the past decade, several high-strength gels have been developed. These gels are expected to use as a kind of new engineering materials in the fields of industry and medical as substitutes to polyester fibers, which are materials of artificial blood vessels. The gels have both low surface friction and well permeability due to a large amount of water absorbed in the gels, which are superiority of the gels compering to the polyester fibers. It is, however, difficult for gels to be forked structure or cavity structure by using cutting or mold. Consequently, it is necessary to develop the additive manufacturing device to synthesize and mode freely gels at the same time. Here we try to develop an optical 3D gel printer that enables gels to be shaped precisely and freely. For the free forming of high-strength gels, the 1st gels are ground to particles and mixed with 2nd pregel solution, and the mixed solution is gelled by the irradiation of UV laser beam through an optical fiber. The use of the optical fiber makes one-point UV irradiation possible. Since the optical fiber is controlled by 3D-CAD, the precise and free molding in XYZ directions is easily realized. We successfully synthesized tough gels using the gel printer.

  7. Characteristics of polyacrylamide gel with THPC and Turnbull Blue gel dosimeters evaluated using optical tomography

    NASA Astrophysics Data System (ADS)

    Pilařová (Vávrů), Kateřina; Kozubíková, Petra; Šolc, Jaroslav; Spěváček, Václav

    2014-11-01

    The purpose of this study was to compare characteristics of radiochromic gel - Turnbull Blue gel (TB gel) with polymer gel - polyacrylamide gel and tetrakis hydroxymethyl phosphonium chloride (PAGAT) using optical tomography. Both types of gels were examined in terms of dose sensitivity, dose response linearity and background value of spectrophotometric absorbance. The calibration curve was obtained for 60Co irradiation performed on Gammacell 220 at predefined gamma dose levels between 0 and 140 Gy for TBG and 0-15 Gy for PAGAT. To measure relative dose distributions from stereotactic irradiation, dosimeters were irradiated on Leksell Gamma Knife Perfexion. The cylindrical glass housings filled with gel were attached to the stereotactic frame. They were exposed with single shot and 16 mm collimator by 65 Gy to a 50% prescription isodose for TB gel and 4 Gy to a 50% prescription isodose for PAGAT. Evaluations of dosimeters were performed on an UV-vis Spectrophotometer Helios β and an optical cone beam homemade tomography scanner with a 16-bit astronomy CCD camera with a set of color filters. The advantages and potential disadvantages for both types of gel dosimeters were summarized. Dose distribution in central slice and measured profiles of 16 mm shot shows excellent correspondence with treatment planning system Leksell GammaPlan® for both PAGAT and Turnbull Blue gels. Gel dosimeters are suitable for steep dose gradient verification. An optical tomography evaluation method is successful. Dose response characteristics of TB gel and PAGAT gel are presented.

  8. Microfluidics of soft granular gels

    NASA Astrophysics Data System (ADS)

    Nixon, Ryan; Bhattacharjee, Tapomoy; Sawyer, W. Gregory; Angelini, Thomas E.

    Microfluidic methods for encapsulating cells and particles typically involve drop making with two immiscible fluids. The main materials constraint in this approach is surface tension, creating inherent instability between the two fluids. We can eliminate this instability by using miscible inner and outer phases. This is achieved by using granular micro gels which are chemically miscible but physically do not mix. These microgels are yield stress materials, so they flow as solid plugs far from shear gradients, and fluidize where gradients are generated - near an injection nozzle for example. We have found that tuning the yield stress of the material by varying polymer concentration, device performance can be controlled. The solid like behavior of the gel allows us to produces infinitely stable jets that maintain their integrity and configuration over long distances and times. These properties can be combined and manipulated to produce discrete particulate bunches of an inner phase, flowing inside of an outer phase, well enough even to print a Morse code message suspended within flow chambers about a millimeter in diameter moving at millimeters a second.

  9. Self-Pumping Active Gel

    NASA Astrophysics Data System (ADS)

    Wu, Kun-Ta; Hishamunda, Jean Bernard; Fraden, Seth; Dogic, Zvonimir

    Isotropic active gels are the network which is consist of cross-linked building blocks and the structure of which changes randomly and isotropically with time. Dogic et. al. show that pairs of anti-parallel microtubules form extensile bundles, which merge, extend, and buckle. In an unconfined system, the dynamics of these bundles causes spontaneous turbulent-like flow driven by motion of microscopic molecular motors. We found that confining these active gels in a millimeter sized toroids causes a transition into a new dynamical state characterized by circulation currents persisting for hours until ATP is depleted. We show how toroid dimensions impact the properties of self-organized circular currents, how directions of circulation can be designed by engineering ratchet-shaped boundaries, and how circulations of connected toroids can be either synchronized or antisynchronized. Furthermore, we demonstrate that the flow rate in the circulation is independent of curvature and length of flow path. The flow rate persists for centimeters without decay, disregarding conventional pipe flow resistance. Such findings pave the path to self-pumping pipe transport and performing physical work with biological system.

  10. Gel time of calcium acrylate grouting material.

    PubMed

    Han, Tong-Chun

    2004-08-01

    Calcium acrylate is a polymerized grout, and can polymerize in an aqueous solution. The polymerization reaction utilizes ammonium persulfate as a catalyst and sodium thiosulfate as the activator. Based on the theory of reaction kinetics, this study on the relation between gel time and concentration of activator and catalyst showed that gel time of calcium acrylate is inversely proportional to activator and catalyst concentration. A formula of gel time is proposed, and an example is provided to verify the proposed formula. PMID:15236477

  11. Conducting Polymer Electrodes for Gel Electrophoresis

    PubMed Central

    Bengtsson, Katarina; Nilsson, Sara; Robinson, Nathaniel D.

    2014-01-01

    In nearly all cases, electrophoresis in gels is driven via the electrolysis of water at the electrodes, where the process consumes water and produces electrochemical by-products. We have previously demonstrated that π-conjugated polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) can be placed between traditional metal electrodes and an electrolyte to mitigate electrolysis in liquid (capillary electroosmosis/electrophoresis) systems. In this report, we extend our previous result to gel electrophoresis, and show that electrodes containing PEDOT can be used with a commercial polyacrylamide gel electrophoresis system with minimal impact to the resulting gel image or the ionic transport measured during a separation. PMID:24586761

  12. Functional behavior of isotropic magnetorheological gels

    NASA Astrophysics Data System (ADS)

    Venkateswara Rao, P.; Maniprakash, S.; Srinivasan, S. M.; Srinivasa, A. R.

    2010-08-01

    Magnetorheological (MR) gels are a new class of soft polymers whose properties can be controlled using a magnetic field. The functional effectiveness of these gels depends on their magnetic controllability. In this paper, an experimental investigation on the functional behavior of a particular type of magnetorheological gels under dynamic and static shear conditions in the presence of a magnetic field is studied. MR gels are prepared with micron sized polarizable carbonyl iron particles interspersed in a polymer matrix gel. The compliance of this magnetic gel can be varied under the influence of an external magnetic field. Since dynamical mechanical analysis tests are difficult to conduct in the presence of large deformations of the order of 50% and strong magnetic fields, a free decay test apparatus is designed and fabricated for obtaining the magnetic field dependent shearing response under dynamic conditions at room temperature. It is observed that a significant change in the elastic modulus occurs in the gels under a magnetic field in the range of 0.1-0.4 T. However, no significant change in the damping ratio is observed under various magnitudes of magnetic field. It is shown that the increase in shear modulus of this kind of magnetic composite gel could be as high as 59% of the zero field value for a gel prepared with 50% by weight of carbonyl iron particles.

  13. Tissue simulating gel for medical research

    NASA Technical Reports Server (NTRS)

    Companion, John A. (Inventor)

    1991-01-01

    A tissue simulating gel and a method for preparing the tissue simulating gel are disclosed. The tissue simulating gel is prepared by a process using water, gelatin, ethylene glycol, and a cross-linking agent. In order to closely approximate the characteristics of the type of tissue being simulated, other material has been added to change the electrical, sound conducting, and wave scattering properties of the tissue simulating gel. The result of the entire process is a formulation that will not melt at the elevated temperatures involved in hyperthermia medical research. Furthermore, the tissue simulating gel will not support mold or bacterial growth, is of a sufficient mechanical strength to maintain a desired shape without a supporting shell, and is non-hardening and non-drying. Substances have been injected into the tissue simulating gel prior to the setting-up thereof just as they could be injected into actual tissue, and the tissue simulating gel is translucent so as to permit visual inspection of its interior. A polyurethane spray often used for coating circuit boards can be applied to the surface of the tissue simulating gel to give a texture similar to human skin, making the tissue simulating gel easier to handle and contributing to its longevity.

  14. Ionic liquid based multifunctional double network gel

    NASA Astrophysics Data System (ADS)

    Ahmed, Kumkum; Higashihara, Tomoya; Arafune, Hiroyuki; Kamijo, Toshio; Morinaga, Takashi; Sato, Takaya; Furukawa, Hidemitsu

    2015-04-01

    Gels are a promising class of soft and wet materials with diverse application in tissue engineering and bio-medical purpose. In order to accelerate the development of gels, it is required to synthesize multi-functional gels of high mechanical strength, ultra low surface friction and suitable elastic modulus with a variety of methods and new materials. Among many types of gel ionic gel made from ionic liquids (ILs) could be used for diverse applications in electrochemical devices and in the field of tribology. IL, a promising materials for lubrication, is a salt with a melting point lower than 100 °C. As a lubricant, ILs are characterized by an extremely low vapor pressure, high thermal stability and high ion conductivity. In this work a novel approach of making double network DN ionic gel using IL has been made utilizing photo polymerization process. A hydrophobic monomer Methyl methacrylate (MMA) has been used as a first network and a hydrophobic IL monomer, N,N-diethyl-N-(2-mthacryloylethyl)-N-methylammonium bistrifluoromethylsulfonyl)imide (DEMM-TFSI) has been used as a second network using photo initiator benzophenon and crosslinker triethylene glycol dimethacrylate (TEGDMA). The resulting DN ionic gel shows transparency, flexibility, high thermal stability, good mechanical toughness and low friction coefficient value which can be a potential candidate as a gel slider in different mechanical devices and can open a new area in the field of gel tribology.

  15. Structure of chitosan gels mineralized by sorption

    NASA Astrophysics Data System (ADS)

    Modrzejewska, Z.; Skwarczyńska, A.; Douglas, T. E. L.; Biniaś, D.; Maniukiewicz, W.; Sielski, J.

    2015-10-01

    The paper presents the structural studies of mineralized chitosan hydrogels. Hydrogels produced by using sodium beta-glycerophosphate (Na-β-GP) as a neutralizing agent. Mineralization was performed method "post loading", which consisted in sorption to the gels structure Ca ions. In order to obtain - in the structure of gels - compounds similar to the hydroxyapatites present naturally in bone tissue, gels after sorption were modified in: pH 7 buffer and sodium hydrogen phosphate. In order to determine the structural properties of the gels, the following methods were used: infrared spectroscopy with Fourier transformation, FTIR, X-ray diffractometry, XRD, scanning electron microscopy, SEM.

  16. Measurement of precipitation using lysimeters

    NASA Astrophysics Data System (ADS)

    Fank, Johann; Klammler, Gernot

    2013-04-01

    Austria's alpine foothill aquifers contain important drinking water resources, but are also used intensively for agricultural production. These groundwater bodies are generally recharged by infiltrating precipitation. A sustainable water resources management of these aquifers requires quantifying real evapotranspiration (ET), groundwater recharge (GR), precipitation (P) and soil water storage change (ΔS). While GR and ΔS can be directly measured by weighable lysimeters and P by separate precipitation gauges, ET is determined by solving the climatic water balance ET = P GR ± ΔS. According to WMO (2008) measurement of rainfall is strongly influenced by precipitation gauge errors. Most significant errors result from wind loss, wetting loss, evaporation loss, and due to in- and out-splashing of water. Measuring errors can be reduced by a larger area of the measuring gaugés surface and positioning the collecting vessel at ground level. Modern weighable lysimeters commonly have a surface of 1 m², are integrated into their typical surroundings of vegetation cover (to avoid oasis effects) and allow scaling the mass change of monolithic soil columns in high measuring accuracy (0.01 mm water equivalent) and high temporal resolution. Thus, also precipitation can be quantified by measuring the positive mass changes of the lysimeter. According to Meissner et al. (2007) also dew, fog and rime can be determined by means of highly precise weighable lysimeters. Furthermore, measuring precipitation using lysimeters avoid common measuring errors (WMO 2008) at point scale. Though, this method implicates external effects (background noise, influence of vegetation and wind) which affect the mass time series. While the background noise of the weighing is rather well known and can be filtered out of the mass time series, the influence of wind, which blows through the vegetation and affects measured lysimeter mass, cannot be corrected easily since there is no clear relation between

  17. Statistical study of precipitating electrons

    NASA Technical Reports Server (NTRS)

    Fontheim, E. G.; Stasiewicz, K.; Chandler, M. O.; Ong, R. S. B.; Hoffman, R. A.

    1981-01-01

    Energy spectra of precipitating electrons are fitted to the sum of three distributions: a power law, a Maxwellian and a Gaussian. This fitting procedure determines seven parameters which characterize the essential features of each spectrum. These characteristic parameters are used to carry out various studies involving precipitating electrons. It is shown that the absence of the power-law population from a particular spectrum is related to the softness of the precipitating primary flux, that the Maxwellian temperature and the Gaussian peak energy have a positive correlation the strength of which varies with local time, that the upward moving Gaussian population has a loss cone distribution, and that the one dimensional velocity distribution parallel to the magnetic field occasionally displays a plateau or a hump on the tail.

  18. Portable liquid collection electrostatic precipitator

    DOEpatents

    Carlson, Duane C.; DeGange, John J.; Halverson, Justin E.

    2005-10-18

    A portable liquid collection electrostatic collection precipitator for analyzing air is provided which is a relatively small, self-contained device. The device has a tubular collection electrode, a reservoir for a liquid, and a pump. The pump pumps the liquid into the collection electrode such that the liquid flows down the exterior of the collection electrode and is recirculated to the reservoir. An air intake is provided such that air to be analyzed flows through an ionization section to ionize analytes in the air, and then flows near the collection electrode where ionized analytes are collected. A portable power source is connected to the air intake and the collection electrode. Ionizable constituents in the air are ionized, attracted to the collection electrode, and precipitated in the liquid. The precipitator may also have an analyzer for the liquid and may have a transceiver allowing remote operation and data collection.

  19. Comparison of Agar Media for Detection and Quantification of Shiga Toxin-Producing Escherichia coli in Cattle Feces.

    PubMed

    Stromberg, Zachary R; Lewis, Gentry L; Moxley, Rodney A

    2016-06-01

    The isolation and quantification of non-O157 Shiga toxin-producing Escherichia coli (STEC) from cattle feces are challenging. The primary objective of this study was to evaluate the performance of selected agar media in an attempt to identify an optimal medium for the detection and quantification of non-O157 STEC in cattle feces. Comparison studies were performed using CHROMagar STEC, Possé differential agar (Possé), Possé modified by the reduction or addition of antimicrobials, STEC heart infusion washed blood agar with mitomycin C (SHIBAM), and SHIBAM modified by the addition of antimicrobials. Fourteen STEC strains, two each belonging to serogroups O26, O45, O103, O111, O121, O145, and O157, were used to test detection in inoculated fecal suspensions at concentrations of 10(2) or 10(3) CFU/g. One STEC strain from each of these seven serogroups was used to estimate the concentration of recovered STEC in feces inoculated at 10(3), 10(4), or 10(5) CFU/g. Significantly more suspensions (P < 0.05) were positive for STEC when plated on Possé containing reduced concentrations of novobiocin and potassium tellurite compared with SHIBAM, but not SHIBAM modified by containing these same antimicrobials at the same concentrations. Numerically, more suspensions were positive for STEC by using this same form of modified Possé compared with Possé, but this difference was not statistically significant. More suspensions were positive for STEC cultured on CHROMagar STEC compared with those on Possé (P < 0.05) and on modified Possé (P = 0.05). Most inoculated fecal suspensions below 10(4) CFU/g of feces were underestimated or not quantifiable for the concentration of STEC by using CHROMagar STEC or modified Possé. These results suggest that CHROMagar STEC performs better than Possé or SHIBAM for detection of STEC in bovine feces, but adjustments in the concentrations of novobiocin and potassium tellurite in the latter two media result in significant improvements in their

  20. Timber Mountain Precipitation Monitoring Station

    SciTech Connect

    Lyles, Brad; McCurdy, Greg; Chapman, Jenny; Miller, Julianne

    2012-01-01

    A precipitation monitoring station was placed on the west flank of Timber Mountain during the year 2010. It is located in an isolated highland area near the western border of the Nevada National Security Site (NNSS), south of Pahute Mesa. The cost of the equipment, permitting, and installation was provided by the Environmental Monitoring Systems Initiative (EMSI) project. Data collection, analysis, and maintenance of the station during fiscal year 2011 was funded by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office Environmental Restoration, Soils Activity. The station is located near the western headwaters of Forty Mile Wash on the Nevada Test and Training Range (NTTR). Overland flows from precipitation events that occur in the Timber Mountain high elevation area cross several of the contaminated Soils project CAU (Corrective Action Unit) sites located in the Forty Mile Wash watershed. Rain-on-snow events in the early winter and spring around Timber Mountain have contributed to several significant flow events in Forty Mile Wash. The data from the new precipitation gauge at Timber Mountain will provide important information for determining runoff response to precipitation events in this area of the NNSS. Timber Mountain is also a groundwater recharge area, and estimation of recharge from precipitation was important for the EMSI project in determining groundwater flowpaths and designing effective groundwater monitoring for Yucca Mountain. Recharge estimation additionally provides benefit to the Underground Test Area Sub-project analysis of groundwater flow direction and velocity from nuclear test areas on Pahute Mesa. Additionally, this site provides data that has been used during wild fire events and provided a singular monitoring location of the extreme precipitation events during December 2010 (see data section for more details). This letter report provides a summary of the site location, equipment, and data collected in