Science.gov

Sample records for agency grain inspection

  1. Grain quality inspection system

    NASA Technical Reports Server (NTRS)

    Flood, C. A., Jr.; Singletow, D. P.; James, S. N.

    1979-01-01

    A review of grain quality indicators and measurement methods was conducted in order to assess the feasibility of using remote sensing technology to develop a continuous monitoring system for use during grain transfer operations. Most detection methods were found to be too slow or too expensive to be incorporated into the normal inspection procedure of a grain elevator on a continuous basis. Two indicators, moisture content and broken corn and foreign material, show potential for automation and are of an economic value. A microprocessor based system which utilizes commercially available electronic moisture meter was developed and tested. A method for automating BCFM measurement is described. A complete system description is presented along with performance test results.

  2. 76 FR 318 - Designation of Minot Grain Inspection, Inc. To Provide Official Class X Weighing Services

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... Provide Official Class X Weighing Services AGENCY: Grain Inspection, Packers and Stockyards Administration... provide official Class X weighing services under the United States Grain Standards Act, as amended (USGSA... geographic area. Minot's present designation is amended to include Class X weighing within their...

  3. 7 CFR 981.17 - Inspection agency.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Inspection agency. 981.17 Section 981.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA...

  4. 7 CFR 981.17 - Inspection agency.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Inspection agency. 981.17 Section 981.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA...

  5. 7 CFR 981.17 - Inspection agency.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection agency. 981.17 Section 981.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA...

  6. 7 CFR 981.17 - Inspection agency.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Inspection agency. 981.17 Section 981.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA...

  7. 7 CFR 981.17 - Inspection agency.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Inspection agency. 981.17 Section 981.17 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE ALMONDS GROWN IN CALIFORNIA...

  8. Application of phased array techniques to coarse grain components inspection.

    PubMed

    Mahaut, Steve; Godefroit, Jean-Louis; Roy, Olivier; Cattiaux, Gérard

    2004-04-01

    Ultrasonic inspection of cast stainless steel components from primary and auxiliary cooling circuits of French Nuclear Power Plant has to face with major difficulties due to the coarse grained structure of these materials. Attenuation losses and structural noise are encountered, which limits the performances of defect detection ability, mostly in terms of degraded signal-to-noise ratio and poor sensitivity. To overcome such problems, theoretical and experimental studies have been achieved at the French Atomic Energy Commission, with support from the French Institute for Radiological Protection and Nuclear Safety. Experimental studies have been performed over stainless steel specimen of known coarse structure (equiaxial grains and/or elongated grains), containing artificial reflectors (cylindrical holes and electro-eroded surface breaking notches). Those mock-ups have been inspected using contact probes of different array designs (linear or matrix splitting), and using pulse echo or dual-element techniques. Such arrays allow to control the ultrasonic beam so as to investigate different inspection angles and focusing depths. Experiments were carried out using oblique longitudinal waves, using delay laws computed by a specific model, taking account of acoustical and geometrical properties of the probes and the inspected component. In addition, specific reconstruction techniques have been investigated to enhance the signal-to-noise ratio as well as spatial resolution. These techniques are based on beam-forming summation and multi-angle inspections. Experimental results show that such techniques allow to reduce the speckle noise and to optimise the beam resolution. Those increased performances allow to detect and to size small planar defects located at the inner wall of a thick specimen, using corner and tip diffraction echoes.

  9. 77 FR 1052 - Solicitation of Nominations for Members of the USDA Grain Inspection Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-09

    ...The Department of Agriculture's (USDA) Grain Inspection, Packers and Stockyards Administration (GIPSA) is seeking nominations for individuals to serve on the USDA Grain Inspection Advisory Committee (Advisory Committee). The Advisory Committee meets twice annually to advise GIPSA on the programs and services it delivers under the U.S. Grain Standards Act (USGSA). Recommendations by the......

  10. 77 FR 12864 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, Inspection...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-02

    ... Review; Comment Request, Inspection of Insured Structures by Communities AGENCY: Federal Emergency...: Inspection of Insured Structures by Communities. Type of information collection: Extension, without...

  11. 7 CFR 800.85 - Inspection of grain in combined lots.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the instructions. (b) Application procedure—(1) For inspection during loading, unloading, or at rest. Applications for official inspection of grain as a combined lot shall (i) be filed in accordance with § 800.116... grain is being unloaded. (2) Recertification. An application for recertification as a combined lot...

  12. 7 CFR 800.85 - Inspection of grain in combined lots.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the instructions. (b) Application procedure—(1) For inspection during loading, unloading, or at rest. Applications for official inspection of grain as a combined lot shall (i) be filed in accordance with § 800.116... grain is being unloaded. (2) Recertification. An application for recertification as a combined lot...

  13. 7 CFR 800.85 - Inspection of grain in combined lots.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the instructions. (b) Application procedure—(1) For inspection during loading, unloading, or at rest. Applications for official inspection of grain as a combined lot shall (i) be filed in accordance with § 800.116... grain is being unloaded. (2) Recertification. An application for recertification as a combined lot...

  14. 7 CFR 800.85 - Inspection of grain in combined lots.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the instructions. (b) Application procedure—(1) For inspection during loading, unloading, or at rest. Applications for official inspection of grain as a combined lot shall (i) be filed in accordance with § 800.116... grain is being unloaded. (2) Recertification. An application for recertification as a combined lot...

  15. 36 CFR 1239.26 - What are an agency's follow up obligations for an inspection report?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... up obligations for an inspection report? 1239.26 Section 1239.26 Parks, Forests, and Public Property... Inspections § 1239.26 What are an agency's follow up obligations for an inspection report? The agency must... recommendation, including a timeline for completion, and proposed progress reporting dates. The agency...

  16. 78 FR 43753 - Inspection and Weighing of Grain in Combined and Single Lots

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-22

    ... inspection and weighing service procedures that GIPSA's Federal Grain Inspection Service (FGIS) performs... typically loaded onto export ships. In this final rule, GIPSA will add new definitions for ``composite'' and..., restrict the inspection and weighing of container lots to the official service provider's area...

  17. 7 CFR 800.84 - Inspection of grain in land carriers, containers, and barges in single lots.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE... approximate quantity or weight of each portion, the location of each portion in the carrier or container, and... show the term “Bulkhead Lot,” the approximate quantity or weight of the grain in the lot, the...

  18. 7 CFR 800.84 - Inspection of grain in land carriers, containers, and barges in single lots.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE... approximate quantity or weight of each portion, the location of each portion in the carrier or container, and... show the term “Bulkhead Lot,” the approximate quantity or weight of the grain in the lot, the...

  19. 49 CFR 107.803 - Approval of an independent inspection agency (IIA).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM PROCEDURES Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders § 107.803 Approval...

  20. 49 CFR 107.803 - Approval of an independent inspection agency (IIA).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM PROCEDURES Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders § 107.803 Approval...

  1. 49 CFR 107.803 - Approval of an independent inspection agency (IIA).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM PROCEDURES Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders § 107.803 Approval...

  2. 49 CFR 107.803 - Approval of an independent inspection agency (IIA).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM PROCEDURES Approval of Independent Inspection Agencies, Cylinder Requalifiers, and Non-domestic Chemical Analyses and Tests of DOT Specification Cylinders § 107.803 Approval...

  3. 75 FR 58417 - Agency Information Collection Activities: Application-Alternative Inspection Services (SENTRI...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-24

    ...-- Alternative Inspection Services (SENTRI Application and FAST Commercial Driver Application) AGENCY: U.S... Form 823S) and the FAST Commercial Driver Application (CBP Form 823F). This is a proposed extension of... Inspection Services including the SENTRI application and the FAST Commercial Driver Application. OMB...

  4. Ultrasonic method for inspection of the propellant grain in the space shuttle solid rocket booster

    NASA Astrophysics Data System (ADS)

    Doyle, T. E.; Degtyar, A. D.; Sorensen, K. P.; Kelso, M. J.; Berger, T. A.

    2000-05-01

    Defects in solid rocket propellant may affect the safe operation of a space launch vehicle. The Space Shuttle reusable solid rocket motor (RSRM) is therefore routinely inspected with radiography for voids, cracks, and inclusions. Ultrasonic methods can be used to supplement radiography when an indication is difficult to interpret due to the projection geometry or low contrast. Such a method was developed to inspect a local region of propellant in an RSRM forward segment for a suspect inclusion. The method used a through-transmission approach, with a stationary transmitter on the propellant grain inside the segment and a receiving transducer scanned over the case surface. Low frequency (⩽250 kHz) pulses were propagated through 10-12 inches of propellant, 0.5 inches of NBR insulation, and 0.5 inches of steel case. Through-transmission images were constructed using time-of-flight analysis of the waveforms. The ultrasonic inspections supported results from extended radiographic studies, showing that the indication was not an inclusion but an artifact resulting from liner thickness variations and a low X-ray projection angle in the segment's dome region. This work demonstrated the feasibility of using ultrasonics for inspection of propellant grain in steel-cased rocket motors.

  5. Low Frequency-SAFT Inspection Methodology for Coarse-Grained Steel Rail Components (Manganese Steel Frogs)

    SciTech Connect

    Diaz, Aaron A.; Andersen, Eric S.; Samuel, Todd J.

    2004-11-01

    In the rail industry, sections of high strength Manganese steel are employed at critical locations in railroad networks. Ultrasonic inspections of Manganese steel microstructures are difficult to inspect with conventional means, as the propagation medium is highly attenuative, coarse-grained, anisotropic and nonhomogeneous in nature. Current in-service inspection methods are ineffective while pre-service X-ray methods (used for full-volumetric examinations of components prior to shipment) are time-consuming, costly, require special facilities and highly trained personnel for safe operations, and preclude manufacturers from inspecting statistically meaningful numbers of frogs for effective quality assurance. In-service examinations consist of visual inspections only and by the time a defect or flaw is visually detected, the structural integrity of the component may already be compromised, and immediate repair or replacement is required. A novel ultrasonic inspection technique utilizing low frequency ultrasound (100 to 500 kHz) combined with a synthetic aperture focusing technique (SAFT) for effective reduction of signal clutter and noise, and extraction of important features in the data, has proven to be effective for these coarse grained steel components. Results from proof-of-principal tests in the laboratory demonstrate an effective means to detect and localize reflectors introduced as a function of size and depth from the top of the frog rail. Using non-optimal, commercially available transducers coupled with the low-frequency/SAFT approach, preliminary evaluations were conducted to study the effects of the material microstructure on ultrasonic propagation, sensitivity and resolution in thick section frog components with machined side-drilled holes. Results from this study will be presented and discussed.

  6. 24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... assuring quality control, the IPIA shall inspect materials in storage and test equipment used by the... and distinct from the data plate that the manufacturer is required to provide under § 3280.5. (C) The... manufacture. See data plate.” (D) The label shall be 2 in. by 4 in. in size and shall be permanently...

  7. 24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... assuring quality control, the IPIA shall inspect materials in storage and test equipment used by the... and distinct from the data plate that the manufacturer is required to provide under § 3280.5. (C) The... manufacture. See data plate.” (D) The label shall be 2 in. by 4 in. in size and shall be permanently...

  8. 7 CFR 800.84 - Inspection of grain in land carriers, containers, and barges in single lots.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... quantity for the inspection of multiple carriers graded on a composite grade or average grade basis. (b... heating and odor. (i) Composite grade. Grain loaded in multiple carriers offered for inspection may be.... The maximum number of individual units that may be combined to form a composite grade analysis is...

  9. 7 CFR 800.156 - Official inspection records.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... performed the inspection. (b) Inspection logs. The record of an official inspection service for grain in a combined lot and shiplot shall include the official inspection log as prescribed in the instructions. The original copy of each inspection log shall be retained by the agency or field office that performed...

  10. Evaluation of ultrasonic array imaging algorithms for inspection of a coarse grained material

    NASA Astrophysics Data System (ADS)

    Van Pamel, A.; Lowe, M. J. S.; Brett, C. R.

    2014-02-01

    Improving the ultrasound inspection capability for coarse grain metals remains of longstanding interest to industry and the NDE research community and is expected to become increasingly important for next generation power plants. A test sample of coarse grained Inconel 625 which is representative of future power plant components has been manufactured to test the detectability of different inspection techniques. Conventional ultrasonic A, B, and C-scans showed the sample to be extraordinarily difficult to inspect due to its scattering behaviour. However, in recent years, array probes and Full Matrix Capture (FMC) imaging algorithms, which extract the maximum amount of information possible, have unlocked exciting possibilities for improvements. This article proposes a robust methodology to evaluate the detection performance of imaging algorithms, applying this to three FMC imaging algorithms; Total Focusing Method (TFM), Phase Coherent Imaging (PCI), and Decomposition of the Time Reversal Operator with Multiple Scattering (DORT MSF). The methodology considers the statistics of detection, presenting the detection performance as Probability of Detection (POD) and probability of False Alarm (PFA). The data is captured in pulse-echo mode using 64 element array probes at centre frequencies of 1MHz and 5MHz. All three algorithms are shown to perform very similarly when comparing their flaw detection capabilities on this particular case.

  11. 7 CFR 800.84 - Inspection of grain in land carriers, containers, and barges in single lots.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... each probe, the grain shall be sampled as thoroughly as possible with an approved probe. The grain in... show a statement, as specified in the instructions, indicating the depth probed. Any inspection which... and is loaded in such a manner that it is possible to secure only door-probe or shallow-probe...

  12. 7 CFR 800.84 - Inspection of grain in land carriers, containers, and barges in single lots.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... each probe, the grain shall be sampled as thoroughly as possible with an approved probe. The grain in... show a statement, as specified in the instructions, indicating the depth probed. Any inspection which... and is loaded in such a manner that it is possible to secure only door-probe or shallow-probe...

  13. 24 CFR 3282.308 - State participation in monitoring of primary inspection agencies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... inspection agencies. (a) An SAA may provide personnel to participate in joint team monitoring of primary... list of what personnel would be supplied for the teams, their qualifications, and how many person-years... agent. A person-year is 2,080 hours of work. (b) If an SAA wishes to monitor the performance of...

  14. 24 CFR 3282.308 - State participation in monitoring of primary inspection agencies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false State participation in monitoring of primary inspection agencies. 3282.308 Section 3282.308 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR...

  15. 34 CFR 682.414 - Records, reports, and inspection requirements for guaranty agency programs.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Records, reports, and inspection requirements for guaranty agency programs. 682.414 Section 682.414 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION FEDERAL FAMILY...

  16. Virtual ultrasound sources for inspecting nuclear components of coarse-grained structure

    SciTech Connect

    Brizuela, J.; Katchadjian, P.; Desimone, C.; Garcia, A.

    2014-02-18

    This work describes an ultrasonic inspection procedure designed for verifying coarse-grained structure materials, which are commonly used on nuclear reactors. In this case, conventional phased array techniques cannot be used due to attenuating characteristics and backscattered noise from microstructures inside the material. Thus, synthetic aperture ultrasonic imaging (SAFT) is used for this approach in contact conditions. In order to increase energy transferred to the medium, synthetic transmit aperture is formed by several elements which generate a diverging wavefront equivalent to a virtual ultrasound source behind the transducer. On the other hand, the phase coherence technique has been applied to reduce more structural noise and improve the image quality. The beamforming process has been implemented over a GPU platform to reduce computing time.

  17. Preparing for and handling agency inspections for the United Kingdom Department of Health.

    PubMed

    Chapman, R

    1995-06-01

    This paper indicates some known differences in approach adopted by the United Kingdom Department of Health (DoH) Good Laboratory Practice (GLP) Monitoring Authority from that of other agencies and offers guidance to quality assurance (QA) professionals in dealing effectively with a DoH inspection. The UK GLP Programme contains, at present, just over 100 member laboratories, ranging from one-man pathology outfits to major companies with perhaps over 1000 staff working in compliance. Laboratories in the GLP program are subject to routine inspection every 2 years; without a satisfactory inspection and continued membership in the GLP program, UK laboratories cannot make a formal claim of compliance. Routine inspections occur at 2-year intervals, with a formal period of notice, allowing some preparation to occur. Routine inspections comprise the selection of a small number of studies for audit and inspection of all the facilities. Inspectors look critically at QA and management systems and routinely interview staff to get a feel for the skills, knowledge, competence, and attitude of those who work on nonclinical studies. Study directors are constant targets for the inspectors' inquisition. Throughout the inspection process, inspectors are accompanied by senior QA staff, whose notes are used to ensure that nothing in the final meeting is reported incorrectly or out of context. The inspectors leave after verbal discussion with management of any significant findings. A full written report is typically provided within 3 weeks, to which a written response from management is required within 4 weeks. There is no Freedom of Information program in the UK.

  18. Workshop-based methodology to understand the risks in grain export inspection and certification.

    PubMed

    Wilson, John R; Vaegen-Lloyd, Jo-Roxy; Caponecchia, Carlo

    2009-07-01

    Much of the human factors contribution in risk assessment and risk management has been focused on systems or product safety; the profession has a much smaller research base regarding risks to do with regulation, certification and public policy, for example. This paper discusses an explicitly human factors contribution to understanding and managing risk for the inspection and export certification of grain and plant products in Australia. Training and awareness workshops, incorporating elements of focus groups, were run for 12 groups of staff and managers from the government department concerned. As well as training in risk management the workshops were used to come to an understanding of the work of the inspectors and other staff, to identify the sources of risk to the successful completion of their work and to develop the basis for a risk assessment framework and tool. The paper is methodological in focus and describes the development and running of the workshops and explains how a human factors oriented risk register was developed on the basis of identification of potential threats and errors in the system. Whilst the contribution of ergonomics is increasingly important as regards safety risk assessment, professionals have been less active as regards business, public policy and even engineering risk. This paper describes an approach within which a new domain was studied and the risks of all kinds identified, preparatory to development of a risk assessment tool.

  19. Recent trends in nondestructive inspections in state highway agencies: can engineering education respond?

    NASA Astrophysics Data System (ADS)

    Rens, Kevin L.; Transue, David J.; Knott, Albert

    1998-03-01

    This paper presents how one university is addressing the problems of our deteriorating and failing infrastructure. Results of two recent questionnaires reveal that State Highway Agencies are beginning to shift their priorities to emphasize inspection and rating of infrastructure. While both public and private practices are responding, education as a whole tends to remain fixed to traditional analysis and design courses. While traditional courses are essential, new trends must be periodically injected into the curriculum. This paper will show the efforts of the Denver campus of the University of Colorado to educate both undergraduate and graduate engineers in these non-traditional aspects of Civil Engineering. The 3- credit course titled Condition Assessment and Failure Analysis of Civil/Mechanical Infrastructure included such topics as nondestructive evaluation (NDE), lock and dam inspections, bridge maintenance and inspection, structural failure analysis, vehicle accident reconstruction, engineering ethics, and the law. The design of new structures is being overshadowed by the need to maintain and rehabilitate existing structures. In addition, valuable educational material is found in our record of past engineering failures. It is hoped that by publishing information on this course other higher learning institutions will be encouraged to educate students as to the trends that are occurring in practice.

  20. 7 CFR 800.85 - Inspection of grain in combined lots.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... (c) Inspection procedure; general—land carriers and barges—(1) Inspection during loading, or... or more single, composite, or average quality lots may be recertified as a combined lot provided that... inspection certificates issued for the single, composite, or average quality lots have been surrendered...

  1. 75 FR 41693 - Export Inspection and Weighing Waiver for High Quality Specialty Grains Transported in Containers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-19

    ... grain, except for the factor test weight, or grain designated as ``organic'' as defined in Sec. 205.2 (7 CFR 205.2) of the regulations issued under the Organic Foods Production Act of 1990, as amended (OFPA... grain, except for the factor test weight, or (2) Specify ``organic'' as defined by the...

  2. Hardware-based image processing for high-speed inspection of grains

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A high-speed, low-cost, image-based sorting device was developed to detect and separate grains with slight color differences and small defects on grains The device directly combines a complementary metal–oxide–semiconductor (CMOS) color image sensor with a field-programmable gate array (FPGA) which...

  3. 76 FR 45397 - Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-29

    ... limits for U.S. No. 1 grain, except for the factor test weight, or grain designated as ``organic'' as defined in Sec. 205.2 (7 CFR 205.2) of the regulations issued under the Organic Food Productions Act of... ``organic'' as defined by the regulations issued under the OFPA. Under this final rule, GIPSA will...

  4. 78 FR 74102 - Solicitation of Nominations for Members of the USDA Grain Inspection Advisory Committee

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF AGRICULTURE... Inspection, Packers and Stockyards Administration (GIPSA) is seeking nominations for individuals to serve on.../forms/doc/AD-755.pdf . FOR FURTHER INFORMATION CONTACT: Terri L. Henry, telephone (202) 205- 8281...

  5. 29 CFR 1960.25 - Qualifications of safety and health inspectors and agency inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... environments where there are less complex hazards, such safety and health specializations as cited above may... conditions affecting employee safety and health, coordination of inspection functions is encouraged....

  6. 78 FR 51138 - Partial Cancellation of Fremont Grain Inspection Department Inc. Designation; Selection of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-20

    ... designation for part of their geographic area to include: Clay county (west of U.S. Route 71), Dickinson... Iowa, is assigned to this official agency. In Iowa Clay county (west of U.S. Route 71),...

  7. 75 FR 38821 - Agency Information Collection Activities: Application-Alternative Inspection Services (SENTRI...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-06

    ... Information Collection Activities: Application-- Alternative Inspection Services (SENTRI Application and FAST... Application (CBP Form 823S) and the FAST Commercial Driver Application (CBP Form 823F). This request for...: Application--Alternative Inspection Services including the SENTRI Application and the FAST Commercial...

  8. 76 FR 78935 - Agency Information Collection Activities: Proposed Collection; Comment Request; Inspection of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-20

    ... of Marathon following any hurricane that may hit the Florida Keys, concerning compliance of insured... Communities implements the inspection procedures in Monroe County, the City of Marathon, and the Village of... City of Marathon, and the Village of Islamorada, Florida, and any other community in Monroe County...

  9. 34 CFR 682.414 - Records, reports, and inspection requirements for guaranty agency programs.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Administration of the Federal Family Education Loan Programs by a Guaranty... 34 Education 4 2014-07-01 2014-07-01 false Records, reports, and inspection requirements...

  10. 34 CFR 682.414 - Records, reports, and inspection requirements for guaranty agency programs.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Administration of the Federal Family Education Loan Programs by a Guaranty... 34 Education 4 2012-07-01 2012-07-01 false Records, reports, and inspection requirements...

  11. 34 CFR 682.414 - Records, reports, and inspection requirements for guaranty agency programs.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Administration of the Federal Family Education Loan Programs by a Guaranty... 34 Education 4 2011-07-01 2011-07-01 false Records, reports, and inspection requirements...

  12. 34 CFR 682.414 - Records, reports, and inspection requirements for guaranty agency programs.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM Administration of the Federal Family Education Loan Programs by a Guaranty... 34 Education 4 2013-07-01 2013-07-01 false Records, reports, and inspection requirements...

  13. 7 CFR 800.51 - Expenses of agency, field office, or Board of Appeals and Review.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Expenses of agency, field office, or Board of Appeals and Review. 800.51 Section 800.51 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS...

  14. 7 CFR 800.86 - Inspection of shiplot, unit train, and lash barge grain in single lots.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Inspection Methods and Procedures § 800.86 Inspection of... prescribed in the instructions. (b) Application procedure. Applications for the official inspection of... factors may not exceed the limit for defects for each numerical grade. Table 22—Breakpoints for...

  15. Methodology for Assessing the Status of a Physical Protection System on the Basis of Agency Inspections and Site Self-Assessments in Rosatom

    SciTech Connect

    Piskarev, Alexandr S.; Babkin, Vladimir; Izmaylov, Alexandr V.; Kulikovsky, Mikhail; Matveev, V.A; Shull, Douglas; Livingston, Linwood H.

    2010-08-11

    The Methodology presents general approaches to the assessment of PPS status including criteria and indicators of such assessment and procedures for evaluating different aspects of physical protection, taking into consideration the significance of the criteria. The regulation includes specific methods of the application of the criteria for the evaluation of different aspects of physical protection (PP), as well as for the comprehensive assessment of the PPS status in the form of text, tables, diagrams and examples. The Methodology is intended to facilitate agency inspections and site self-assessments of PPS at a NS as well as evaluation of their results. This regulation was approved by Rosatom Headquarters in October 2008 and is currently used in the process of agency PP inspections. The Methodology was discussed by Rosatom PP specialists, who take part in agency inspections and site self-assessments, at a workshop in Moscow, June 2009, and was presented at the 4th MPC&A Conference in Obninsk, October 2009. This paper presents the methodology and its practical application during Rosatom agency inspections and site self-assessments.

  16. 9 CFR 354.110 - Disposition of fees for inspection made under cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND...

  17. 9 CFR 354.109 - Fees or charges for inspection service performed under cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND...

  18. 9 CFR 354.65 - Form of inspection mark.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Identifying...

  19. 9 CFR 354.74 - Prerequisites to inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Supervision...

  20. 9 CFR 354.134 - Appeal inspections; how made.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Appeals §...

  1. 9 CFR 354.30 - Who may obtain inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Application...

  2. 9 CFR 354.90 - Report of inspection work.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Reports §...

  3. 40 CFR 763.176 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain Asbestos-Containing Products; Labeling Requirements § 763.176 Inspections. The Agency will conduct inspections...

  4. 9 CFR 201.30 - Amount of market agency, dealer and packer bonds.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Amount of market agency, dealer and packer bonds. 201.30 Section 201.30 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS... bond coverage for a market agency selling on commission be less than $10,000 or such higher amount...

  5. 9 CFR 201.30 - Amount of market agency, dealer and packer bonds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Amount of market agency, dealer and packer bonds. 201.30 Section 201.30 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS... bond coverage for a market agency selling on commission be less than $10,000 or such higher amount...

  6. 9 CFR 201.30 - Amount of market agency, dealer and packer bonds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Amount of market agency, dealer and packer bonds. 201.30 Section 201.30 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS... bond coverage for a market agency selling on commission be less than $10,000 or such higher amount...

  7. 9 CFR 201.56 - Market agencies selling on commission; purchases from consignment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Market agencies selling on commission; purchases from consignment. 201.56 Section 201.56 Animals and Animal Products GRAIN INSPECTION, PACKERS AND.... (c) Key employees not to purchase livestock out of consignments. No market agency engaged in...

  8. Inspection methods for physical protection Task III review of other agencies' physical security activities for research reactors

    SciTech Connect

    1980-01-01

    In Task I of this project, the current Nuclear Regulatory Commission (NRC) position-on physical security practices and procedures at research reactors were reviewed. In the second task, a sampling of the physical security plans was presented and the three actual reactor sites described in the security plans were visited. The purpose of Task III is to review other agencies' physical security activities for research reactors. During this phase, the actions, procedures and policies of two domestic and two foreign agencies other than the NRC that relate to the research reactor community were examined. The agencies examined were: International Atomic Energy Agency; Canadian Atomic Energy Control Board; Department of Energy; and American Nuclear Insurers.

  9. 9 CFR 202.104 - Rule 4: Agency action.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Rule 4: Agency action. 202.104 Section 202.104 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS... parties to an amicable or informal adjustment of the matter by communication with the parties or...

  10. 9 CFR 202.104 - Rule 4: Agency action.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Rule 4: Agency action. 202.104 Section 202.104 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS... parties to an amicable or informal adjustment of the matter by communication with the parties or...

  11. 9 CFR 202.104 - Rule 4: Agency action.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rule 4: Agency action. 202.104 Section 202.104 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS... parties to an amicable or informal adjustment of the matter by communication with the parties or...

  12. 9 CFR 354.121 - Ante-mortem inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Procedures; Ante-Mortem Inspections § 354.121 Ante-mortem inspection. An ante-mortem inspection of...

  13. From conflict to cooperation: The on-site inspection agency as a model for international arms control organizations. Master's thesis

    SciTech Connect

    Traurig, R.E.

    1993-12-01

    An international system is necessary in a multi-polar world. The problem for today is learning how to develop cooperation, not just assume it. Most striking was the level of cooperation involved in the area of nuclear weapons. The United States and the Soviet Union signing of the Intermediate-Range Nuclear Forces Treaty in 1987 ushered in an unprecedented acceptance of intrusive verification measures. The puzzle surrounding this historic event is how the two sides managed to move from conflict to cooperation, from a zero-sum game to positive gains for both sides. Solving this puzzle may provide lessons that can be applied today to organizations such as the International Atomic Energy Agency and the United Nations Special Commission on Iraq. Solving this puzzle will also help students of international relations to better understand how nations learn to cooperate. The search foR a new strategy in the post-Cold War era shows that reality is more complicated in a multi-polar environment. The simpler assumptions that explained the antagonistic situation no longer apply. An attempt must be made to find and develop those structures which may foster overall cooperation. Nations can learn to work together in an area vital to national security, arms control, by working together. Nations can learn by doing if the structure of the organization does not hinder the process. Sustained cooperation, therefore, can be a product and precondition of the organization through the structure of a given treaty.

  14. 9 CFR 354.62 - Inspection mark with respect to product.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS...

  15. 9 CFR 354.142 - Food product inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND...

  16. 9 CFR 354.76 - Time of inspection in an official plant.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS...

  17. 9 CFR 354.105 - Fees for additional copies of inspection certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND...

  18. 9 CFR 201.56 - Market agencies selling on commission; purchases from consignment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Market agencies selling on commission; purchases from consignment. 201.56 Section 201.56 Animals and Animal Products GRAIN INSPECTION, PACKERS AND... other available buyers, and then only at a price higher than the highest available bid on such...

  19. 9 CFR 201.56 - Market agencies selling on commission; purchases from consignment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Market agencies selling on commission; purchases from consignment. 201.56 Section 201.56 Animals and Animal Products GRAIN INSPECTION, PACKERS AND... other available buyers, and then only at a price higher than the highest available bid on such...

  20. 9 CFR 201.56 - Market agencies selling on commission; purchases from consignment.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Market agencies selling on commission; purchases from consignment. 201.56 Section 201.56 Animals and Animal Products GRAIN INSPECTION, PACKERS AND... other available buyers, and then only at a price higher than the highest available bid on such...

  1. 9 CFR 201.29 - Market agencies, packers and dealers required to file and maintain bonds.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Market agencies, packers and dealers required to file and maintain bonds. 201.29 Section 201.29 Animals and Animal Products GRAIN INSPECTION... dealers to purchase livestock for slaughter only, shall execute and maintain a reasonable bond on...

  2. 9 CFR 201.29 - Market agencies, packers and dealers required to file and maintain bonds.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Market agencies, packers and dealers required to file and maintain bonds. 201.29 Section 201.29 Animals and Animal Products GRAIN INSPECTION... dealers to purchase livestock for slaughter only, shall execute and maintain a reasonable bond on...

  3. 77 FR 24873 - Modernization of Poultry Slaughter Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-26

    ... Modernization of Poultry Slaughter Inspection AGENCY: Food Safety and Inspection Service, USDA. ACTION: Proposed... the comment period for the proposed rulemaking ``Modernization of Poultry Slaughter Inspection'' and... advocacy organizations and two trade associations representing the poultry industry asked that FSIS...

  4. 75 FR 47823 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, OMB No...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-09

    ... Services Customer Satisfaction Survey AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice; 30... Title: Federal Emergency Management Agency Housing Inspection Services Customer Satisfaction Survey... Inspection Services Customer Satisfaction Survey. Abstract: FEMA Housing Inspection Services...

  5. 7 CFR 800.87 - New inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false New inspections. 800.87 Section 800.87 Agriculture... Methods and Procedures § 800.87 New inspections. (a) Identity lost. An applicant may request official personnel to perform a new original inspection service on an identified lot of grain, or on an...

  6. 7 CFR 800.87 - New inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false New inspections. 800.87 Section 800.87 Agriculture... Methods and Procedures § 800.87 New inspections. (a) Identity lost. An applicant may request official personnel to perform a new original inspection service on an identified lot of grain, or on an...

  7. Laboratory accreditation and inspection.

    PubMed

    Rauch, Carol A; Nichols, James H

    2007-12-01

    Clinical laboratories perform diagnostic testing in a highly regulated environment in which federal, state, and private accreditation agencies monitor the quality of testing processes. These agencies vary in the focus and stringency of their requirements, and differences exist among states. Continued accreditation requires regular inspection to assure quality of test results for physicians, insurers, and, ultimately, the patients being tested. Preparation for inspection requires understanding of the unique accreditation requirements for each institution, establishment of quality assurance and quality improvement oversight, and communication of each staff member's role in delivering quality test results for patient care.

  8. 7 CFR 810.801 - Definition of mixed grain.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any mixture of grains for which standards have been established under the United States Grain Standards...

  9. 7 CFR 810.801 - Definition of mixed grain.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any mixture of grains for which standards have been established under the United States Grain Standards...

  10. 7 CFR 810.801 - Definition of mixed grain.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any mixture of grains for which standards have been established under the United States Grain Standards...

  11. 7 CFR 810.801 - Definition of mixed grain.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE OFFICIAL UNITED STATES STANDARDS FOR GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any mixture of grains for which standards have been established under the United States Grain Standards...

  12. 7 CFR 868.52 - Certificating retest inspection results.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Certificating retest inspection results. 868.52 Section 868.52 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND STANDARDS FOR...

  13. 77 FR 4407 - Modernization of Poultry Slaughter Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-27

    ...The Food Safety and Inspection Service (FSIS) is proposing a new inspection system for young chicken and turkey slaughter establishments that would replace the current Streamlined Inspection System (SIS), the New Line Speed Inspection System (NELS), and the New Turkey Inspection System (NTIS). The Agency is also proposing several changes that would affect all establishments that slaughter......

  14. Spatial image compounding applied to a phase coherence corrected UT-PA technique for inspecting nuclear components of coarse-grained structure

    NASA Astrophysics Data System (ADS)

    Brizuela, Jose; Katchadjian, Pablo; Garcia, Alejandro; Desimone, Carlos

    2016-02-01

    The aim of this work is to obtain a C-Scan view of an austenitic stainless steel weld from a nuclear use pipe. In order to obtain this result Sectorial Scans (S-Scan) from both sides of the weld are obtained by Ultrasonic Phase Array (UT-PA). Then, spatial image compounding is performed to generate a single image from the S-Scans acquired at the same circumferential position of the transducer. These joints have a coarse grain structure which significantly reduce the transmission of the ultrasonic wave due to attenuation characteristics and backscattered noise from microstructures inside the material. For this reason, phase coherence imaging technique has been also applied to reduce the structural noise and improve the image quality. To verify detected defects, and given the impossibility of cutting the component, gammagraphy were performed with Co60.

  15. Inspecting Playgrounds for Hazards.

    ERIC Educational Resources Information Center

    Gold, Seymour M.

    1991-01-01

    Safe playgrounds are an essential mission for public park, recreation, education, and child care agencies. The article describes how to create safety programs and offers lists of safety program components, safety inspection steps, and preventive maintenance schedules. It also presents playground safety checklists and notes three available…

  16. 9 CFR 354.122 - Condemnation on ante-mortem inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection Procedures; Ante-Mortem Inspections § 354.122 Condemnation on ante-mortem inspection. Rabbits found in...

  17. Information-Driven Inspections

    SciTech Connect

    Laughter, Mark D; Whitaker, J Michael; Lockwood, Dunbar

    2010-01-01

    New uranium enrichment capacity is being built worldwide in response to perceived shortfalls in future supply. To meet increasing safeguards responsibilities with limited resources, the nonproliferation community is exploring next-generation concepts to increase the effectiveness and efficiency of safeguards, such as advanced technologies to enable unattended monitoring of nuclear material. These include attribute measurement technologies, data authentication tools, and transmission and security methods. However, there are several conceptual issues with how such data would be used to improve the ability of a safeguards inspectorate such as the International Atomic Energy Agency (IAEA) to reach better safeguards conclusions regarding the activities of a State. The IAEA is pursuing the implementation of information-driven safeguards, whereby all available sources of information are used to make the application of safeguards more effective and efficient. Data from continuous, unattended monitoring systems can be used to optimize on-site inspection scheduling and activities at declared facilities, resulting in fewer, better inspections. Such information-driven inspections are the logical evolution of inspection planning - making use of all available information to enhance scheduled and randomized inspections. Data collection and analysis approaches for unattended monitoring systems can be designed to protect sensitive information while enabling information-driven inspections. A number of such inspections within a predetermined range could reduce inspection frequency while providing an equal or greater level of deterrence against illicit activity, all while meeting operator and technology holder requirements and reducing inspector and operator burden. Three options for using unattended monitoring data to determine an information-driven inspection schedule are to (1) send all unattended monitoring data off-site, which will require advances in data analysis techniques to

  18. 9 CFR 381.309 - Finished product inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... Finished product inspection. (a) Finished product inspections must be handled according to: (1) A HACCP.... (b)-(c) (d) Procedures for finished product inspections where the HACCP plan for thermally...

  19. 9 CFR 354.63 - Marking inspected products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Identifying and... product was inspected and certified. The class of the rabbits shall be shown on the label. The...

  20. 9 CFR 354.140 - Forms of inspection certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Inspection... regulations in this part shall be approved by the Administrator as to form, and: (a) Each rabbit...

  1. Food Safety and Quality. Uniform, Risk-Based Inspection System Needed to Ensure Safe Food Supply,

    DTIC Science & Technology

    1992-06-01

    Concerned about the effectiveness of the federal food safety inspection system, the Chairman, Subcommittee on Oversight and Investigations, House...federal resources for inspection, and (3) agencies are effectively coordinating their food safety and quality inspection efforts.

  2. 29 CFR 1960.31 - Inspections by OSHA.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in accordance with subpart J of this part. (d) OSHA inspections shall follow the general format set forth...

  3. 29 CFR 1960.31 - Inspections by OSHA.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in accordance with subpart J of this part. (d) OSHA inspections shall follow the general format set forth...

  4. 29 CFR 1960.31 - Inspections by OSHA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in accordance with subpart J of this part. (d) OSHA inspections shall follow the general format set forth...

  5. 7 CFR 800.97 - Weighing grain in containers, land carriers, barges, and shiplots.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in containers, land carriers, barges... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing Provisions and Procedures § 800.97 Weighing grain...

  6. 7 CFR 868.61 - How to request appeal inspection service.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false How to request appeal inspection service. 868.61 Section 868.61 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

  7. 7 CFR 868.61 - How to request appeal inspection service.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 7 2012-01-01 2012-01-01 false How to request appeal inspection service. 868.61 Section 868.61 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

  8. 7 CFR 868.61 - How to request appeal inspection service.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 7 2013-01-01 2013-01-01 false How to request appeal inspection service. 868.61 Section 868.61 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

  9. 7 CFR 868.61 - How to request appeal inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false How to request appeal inspection service. 868.61 Section 868.61 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

  10. 7 CFR 868.61 - How to request appeal inspection service.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 7 2014-01-01 2014-01-01 false How to request appeal inspection service. 868.61 Section 868.61 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

  11. 9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  12. 9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  13. 9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  14. 9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  15. 9 CFR 381.108 - Official poultry inspection certificates; issuance and disposition.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Official poultry inspection... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  16. 9 CFR 381.38 - Overtime and holiday inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION... service. (a) The management of an official establishment, an importer, or an exporter shall reimburse...

  17. 40 CFR 725.75 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Inspections. 725.75 Section 725.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Administrative Procedures § 725.75 Inspections. EPA...

  18. 40 CFR 725.75 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Inspections. 725.75 Section 725.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Administrative Procedures § 725.75 Inspections. EPA...

  19. 40 CFR 725.75 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Inspections. 725.75 Section 725.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Administrative Procedures § 725.75 Inspections. EPA...

  20. 40 CFR 725.75 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Inspections. 725.75 Section 725.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Administrative Procedures § 725.75 Inspections. EPA...

  1. 40 CFR 725.75 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Inspections. 725.75 Section 725.75 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT REPORTING REQUIREMENTS AND REVIEW PROCESSES FOR MICROORGANISMS Administrative Procedures § 725.75 Inspections. EPA...

  2. 14 CFR 145.223 - FAA inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false FAA inspections. 145.223 Section 145.223 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.223 FAA inspections. (a)...

  3. OSHA Inspections

    DTIC Science & Technology

    2000-01-01

    Under the Occupational Safety and Health Act of 1970 (the Act), the Occupational Safety and Health Administration (OSHA) is authorized to conduct... occupational safety and health field and who are trained in OSHA standards and in the recognition of safety and health hazards. Similarly, states with...their own occupational safety and health programs conduct inspection using qualified state compliance safety and health officers.

  4. 49 CFR 40.107 - Who may inspect laboratories?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 1 2012-10-01 2012-10-01 false Who may inspect laboratories? 40.107 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Drug Testing Laboratories § 40.107 Who may inspect laboratories? As a laboratory, you must permit an inspection, with or without prior notice, by ODAPC, a DOT agency, or a...

  5. 49 CFR 40.107 - Who may inspect laboratories?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 1 2013-10-01 2013-10-01 false Who may inspect laboratories? 40.107 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Drug Testing Laboratories § 40.107 Who may inspect laboratories? As a laboratory, you must permit an inspection, with or without prior notice, by ODAPC, a DOT agency, or a...

  6. 49 CFR 40.107 - Who may inspect laboratories?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 1 2011-10-01 2011-10-01 false Who may inspect laboratories? 40.107 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Drug Testing Laboratories § 40.107 Who may inspect laboratories? As a laboratory, you must permit an inspection, with or without prior notice, by ODAPC, a DOT agency, or a...

  7. 49 CFR 40.107 - Who may inspect laboratories?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 1 2014-10-01 2014-10-01 false Who may inspect laboratories? 40.107 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Drug Testing Laboratories § 40.107 Who may inspect laboratories? As a laboratory, you must permit an inspection, with or without prior notice, by ODAPC, a DOT agency, or a...

  8. 49 CFR 40.107 - Who may inspect laboratories?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Who may inspect laboratories? 40.107 Section 40... DRUG AND ALCOHOL TESTING PROGRAMS Drug Testing Laboratories § 40.107 Who may inspect laboratories? As a laboratory, you must permit an inspection, with or without prior notice, by ODAPC, a DOT agency, or a...

  9. 9 CFR 302.1 - Establishments requiring inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Establishments requiring inspection. 302.1 Section 302.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  10. 9 CFR 304.3 - Conditions for receiving inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  11. 9 CFR 307.5 - Overtime and holiday inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Overtime and holiday inspection service. 307.5 Section 307.5 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  12. 9 CFR 304.1 - Application for inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  13. 9 CFR 304.3 - Conditions for receiving inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  14. 9 CFR 304.1 - Application for inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  15. 9 CFR 304.1 - Application for inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  16. 9 CFR 304.1 - Application for inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  17. 9 CFR 304.3 - Conditions for receiving inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  18. 9 CFR 304.1 - Application for inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Application for inspection. 304.1 Section 304.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  19. 9 CFR 304.3 - Conditions for receiving inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  20. 9 CFR 304.3 - Conditions for receiving inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Conditions for receiving inspection. 304.3 Section 304.3 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  1. 75 FR 74674 - Updates to Vessel Inspection Fees

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-01

    ... SECURITY Coast Guard 46 CFR Part 2 RIN 1625-ZA28 Updates to Vessel Inspection Fees AGENCY: Coast Guard, DHS... updating vessel inspection fees. The Coast Guard, by regulation, establishes inspection fees for U.S... examination fees. The Coast Guard is considering options for updating and/or restructuring these...

  2. 9 CFR 352.9 - Report of inspection work.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  3. 9 CFR 352.7 - Marking inspected products.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Marking inspected products. 352.7 Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  4. 9 CFR 352.11 - Post-mortem inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Post-mortem inspection. 352.11 Section 352.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  5. 9 CFR 352.7 - Marking inspected products.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Marking inspected products. 352.7 Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  6. 9 CFR 352.7 - Marking inspected products.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Marking inspected products. 352.7 Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  7. 9 CFR 352.9 - Report of inspection work.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  8. 9 CFR 352.9 - Report of inspection work.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  9. 9 CFR 352.7 - Marking inspected products.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Marking inspected products. 352.7 Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  10. 9 CFR 352.11 - Post-mortem inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Post-mortem inspection. 352.11 Section 352.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  11. 9 CFR 352.11 - Post-mortem inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Post-mortem inspection. 352.11 Section 352.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  12. 9 CFR 352.7 - Marking inspected products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking inspected products. 352.7 Section 352.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  13. 9 CFR 352.9 - Report of inspection work.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  14. 9 CFR 352.9 - Report of inspection work.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Report of inspection work. 352.9 Section 352.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  15. 9 CFR 352.11 - Post-mortem inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Post-mortem inspection. 352.11 Section 352.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  16. 9 CFR 352.11 - Post-mortem inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Post-mortem inspection. 352.11 Section 352.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND...

  17. Reliable data acquisition for inspection systems

    NASA Astrophysics Data System (ADS)

    Silva, V. P.; Silva, D. S.; Boccardo, D. R.; Machado, R. C. S.; Carmo, L. F. R. C.

    2015-01-01

    In Brazil, the road transportation of dangerous goods is subject to regulatory control, which is conducted by Inmetro, the National Institute of Metrology, Quality and Technology. Currently, the process of monitoring such inspections is done manually, leaving the possibility of some inconsistencies: inspections held outside the authorized local inspection, incorrectly, incompletely, or even be held. Thus, in order to increase the reliability of such inspections, it is needed a closer monitoring by the regulatory agency. One approach towards that, is the implementation of an automated process in which evidences are collected in a reliable way during the inspections, enabling further analyses. This work employs security mechanisms on a portable device to ensure the confidence of the evidences collected during an inspection, paving the way for later more robust analyzes.

  18. 78 FR 54861 - Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-06

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration 49 CFR Part 396 RIN 2126-AB46 Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report AGENCY: Federal Motor Carrier Safety Administration (FMCSA),...

  19. 7 CFR 810.801 - Definition of mixed grain.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...; and that such mixture consists of 50 percent or more of whole kernels of grain and/or whole or broken... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of mixed grain. 810.801 Section 810.801 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND...

  20. 9 CFR 381.199 - Inspection of poultry products offered for entry.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Inspection of poultry products offered..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported...

  1. 9 CFR 381.199 - Inspection of poultry products offered for entry.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Inspection of poultry products offered..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported...

  2. 9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  3. 77 FR 13512 - National Advisory Committee on Meat and Poultry Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-07

    ... Committee on Meat and Poultry Inspection AGENCY: Food Safety and Inspection Service, USDA. ACTION: Notice of... Advisory Committee Act, that the National Advisory Committee on Meat and Poultry Inspection (NACMPI) will... of Poultry Slaughter Inspection published January 27, 2012. FSIS will provide an overview of...

  4. 77 FR 75118 - National Advisory Committee on Meat and Poultry Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-19

    ... Food Safety and Inspection Service National Advisory Committee on Meat and Poultry Inspection AGENCY... the National Advisory Committee on Meat and Poultry Inspection (NACMPI). The Committee is being..., poultry, and processed egg products, inspection, safety, and other matters that fall within the scope...

  5. 9 CFR 381.199 - Inspection of poultry products offered for entry.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Inspection of poultry products offered..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported...

  6. 75 FR 56502 - National Advisory Committee on Meat and Poultry Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ... Food Safety and Inspection Service National Advisory Committee on Meat and Poultry Inspection AGENCY.... App. 2, that the National Advisory Committee on Meat and Poultry Inspection (NACMPI) will hold a... Committee on Meat and Poultry Inspection, USDA, FSIS, 14th & Independence Avenue, SW., Room 1180,...

  7. 9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  8. 9 CFR 381.199 - Inspection of poultry products offered for entry.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Inspection of poultry products offered..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported...

  9. 9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  10. 9 CFR 381.109 - Form of official poultry inspection certificate.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Form of official poultry inspection..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Official...

  11. 9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  12. 9 CFR 381.199 - Inspection of poultry products offered for entry.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection of poultry products offered..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Imported...

  13. 9 CFR 381.109 - Form of official poultry inspection certificate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Form of official poultry inspection..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Official...

  14. 9 CFR 381.109 - Form of official poultry inspection certificate.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Form of official poultry inspection..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Official...

  15. 9 CFR 381.109 - Form of official poultry inspection certificate.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Form of official poultry inspection..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Official...

  16. 9 CFR 381.109 - Form of official poultry inspection certificate.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Form of official poultry inspection..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Official...

  17. 9 CFR 381.209 - Returned United States inspected and marked poultry products; exemption.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... marked poultry products; exemption. 381.209 Section 381.209 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION...

  18. 9 CFR 354.123 - Segregation of suspects on ante-mortem inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF.... All rabbits which, on ante-mortem inspection, do not plainly show, but are suspected of being...

  19. 9 CFR 354.107 - Continuous inspection performed on a resident basis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF... inspection of rabbits and products thereof shall be those provided for in § 354.101(b) and specified...

  20. 78 FR 53483 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... COMMISSION Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 3 AGENCY: Nuclear Regulatory Commission. ACTION: Determination of inspections, tests, analyses, and..., tests, and analyses have been successfully completed, and that the specified acceptance criteria are...

  1. 78 FR 53484 - Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 4

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-29

    ... COMMISSION Inspections, Tests, Analyses, and Acceptance Criteria; Vogtle Electric Generating Plant, Unit 4 AGENCY: Nuclear Regulatory Commission. ACTION: Determination of inspections, tests, analyses, and..., tests, and analyses have been successfully completed, and that the specified acceptance criteria are...

  2. 78 FR 35056 - Effectiveness of the Reactor Oversight Process Baseline Inspection Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-11

    ... and philosophy and contains a list of all inspection procedures. The agency's goal for the current... provide a validation of the basic philosophy and key principles of the baseline inspection program...

  3. Physical underground storage tank internal inspection

    SciTech Connect

    Hattaway, L.

    1995-12-31

    Internal inspection of Underground Storage Tanks (USTs) is a vital part of compliance, called for under the Environmental Protection Agency (EPA) regulations (40 CFR, Part 280). Understanding the fundamentals of this technique is important for achieving compliance, economically. Internal physical inspections of buried tanks have been a valued service long before EPA regulations. Placing an experienced, well trained inspector inside of a tank can provide information, data and assessment that is unavailable by any other method. The capability of cleaning metal surfaces and truly inspecting corrosion damage is most important. Inspections include visual evaluations, plus a wide range of tools, instruments and techniques that provide in-depth analysis of real conditions. Assessment is based on specific facts that are completely understandable to the non-technical, as well as engineers and scientists. This paper is an overview of the Physical UST Internal Inspection needed to assess existing steel USTs.

  4. 7 CFR 868.51 - How to request retest inspection service.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false How to request retest inspection service. 868.51 Section 868.51 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... REGULATIONS AND STANDARDS FOR CERTAIN AGRICULTURAL COMMODITIES Regulations Retest Inspection Service §...

  5. Presolar Grains

    NASA Astrophysics Data System (ADS)

    Zinner, E. K.

    2003-12-01

    Traditionally, astronomers have studied the stars by using, with rare exception, electromagnetic radiation received by telescopes on and above the Earth. Since the mid-1980s, an additional observational window has been opened in the form of microscopic presolar grains found in primitive meteorites. These grains had apparently formed in stellar outflows of late-type stars and in the ejecta of stellar explosions and had survived the formation of the solar system. They can be located in and extracted from their parent meteorites and studied in detail in the laboratory. Their stellar origin is recognized by their isotopic compositions, which are completely different from those of the solar system and, for some elements, cover extremely wide ranges, leaving little doubt that the grains are ancient stardust.By the 1950s it had been conclusively established that the elements from carbon on up are produced by nuclear reactions in stars and the classic papers by Burbidge et al. (1957) and Cameron (1957) provided a theoretical framework for stellar nucleosynthesis. According to these authors, nuclear processes produce elements with very different isotopic compositions, depending on the specific stellar source. The newly produced elements are injected into the interstellar medium (ISM) by stellar winds or as supernova (SN) ejecta, enriching the galaxy in "metals" (all elements heavier than helium) and after a long galactic history the solar system is believed to have formed from a mix of this material. In fact, the original work by Burbidge et al. and Cameron was stimulated by the observation of regularities in the abundance of the nuclides in the solar system as obtained by the study of meteorites (Suess and Urey, 1956). Although providing only a grand average of many stellar sources, the solar system abundances of the elements and isotopes ( Anders and Grevesse, 1989; Grevesse et al., 1996; see Chapter 1.03; Lodders, 2003) remained an important test for nucleosynthesis

  6. Grain Spectroscopy

    NASA Technical Reports Server (NTRS)

    Allamandola, L. J.

    1992-01-01

    Our fundamental knowledge of interstellar grain composition has grown substantially during the past two decades thanks to significant advances in two areas: astronomical infrared spectroscopy and laboratory astrophysics. The opening of the mid-infrared, the spectral range from 4000-400 cm(sup -1) (2.5-25 microns), to spectroscopic study has been critical to this progress because spectroscopy in this region reveals more about a materials molecular composition and structure than any other physical property. Infrared spectra which are diagnostic of interstellar grain composition fall into two categories: absorption spectra of the dense and diffuse interstellar media, and emission spectra from UV-Vis rich dusty regions. The former will be presented in some detail, with the latter only very briefly mentioned. This paper summarized what we have learned from these spectra and presents 'doorway' references into the literature. Detailed reviews of many aspects of interstellar dust are given.

  7. Inspection Checklist for Pharmaceuticals MACT Standard 40 CFR Part 63

    EPA Pesticide Factsheets

    This checklist is a compliance tool and/or a guidance document to be used by USEPA, State and Local agency inspectors, as well as the pharmaceutical industry, for the purposes of a facility compliance inspection or a self audit.

  8. 40 CFR 205.4 - Inspection and monitoring.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Section 205.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS General Provisions § 205.4 Inspection and... comply with these regulations. (b) The Director, Noise Enforcement Division, may request that...

  9. 40 CFR 205.4 - Inspection and monitoring.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Section 205.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS General Provisions § 205.4 Inspection and... comply with these regulations. (b) The Director, Noise Enforcement Division, may request that...

  10. 40 CFR 205.4 - Inspection and monitoring.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Section 205.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS General Provisions § 205.4 Inspection and... comply with these regulations. (b) The Director, Noise Enforcement Division, may request that...

  11. 30 CFR 740.17 - Inspection, enforcement and civil penalties.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... agency to inspect the operations, without advance notice or a search warrant and upon presentation of... accordance with paragraph (a) of this section. (3) No search warrant shall be required with respect to...

  12. 30 CFR 740.17 - Inspection, enforcement and civil penalties.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... agency to inspect the operations, without advance notice or a search warrant and upon presentation of... accordance with paragraph (a) of this section. (3) No search warrant shall be required with respect to...

  13. 30 CFR 740.17 - Inspection, enforcement and civil penalties.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... agency to inspect the operations, without advance notice or a search warrant and upon presentation of... accordance with paragraph (a) of this section. (3) No search warrant shall be required with respect to...

  14. 40 CFR 763.85 - Inspection and reinspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Inspection and reinspections. 763.85 Section 763.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.85 Inspection and reinspections....

  15. 40 CFR 763.85 - Inspection and reinspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Inspection and reinspections. 763.85 Section 763.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.85 Inspection and reinspections....

  16. 40 CFR 763.85 - Inspection and reinspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Inspection and reinspections. 763.85 Section 763.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.85 Inspection and reinspections....

  17. 40 CFR 763.85 - Inspection and reinspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Inspection and reinspections. 763.85 Section 763.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.85 Inspection and reinspections....

  18. 40 CFR 763.85 - Inspection and reinspections.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Inspection and reinspections. 763.85 Section 763.85 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.85 Inspection and reinspections....

  19. 40 CFR 717.17 - Inspection and reporting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... REACTIONS TO HEALTH OR THE ENVIRONMENT General Provisions § 717.17 Inspection and reporting requirements. (a... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Inspection and reporting requirements. 717.17 Section 717.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)...

  20. 40 CFR 717.17 - Inspection and reporting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... REACTIONS TO HEALTH OR THE ENVIRONMENT General Provisions § 717.17 Inspection and reporting requirements. (a... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Inspection and reporting requirements. 717.17 Section 717.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)...

  1. 40 CFR 211.109 - Inspection and monitoring.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Inspection and monitoring. 211.109 Section 211.109 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS PRODUCT NOISE LABELING General Provisions § 211.109 Inspection and monitoring. (a) Any...

  2. 40 CFR 205.4 - Inspection and monitoring.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Inspection and monitoring. 205.4 Section 205.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS General Provisions § 205.4 Inspection...

  3. 40 CFR 202.23 - Visual tire inspection.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Visual tire inspection. 202.23 Section 202.23 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS... Visual tire inspection. No motor carrier subject to these regulations shall at any time operate any...

  4. 40 CFR 202.22 - Visual exhaust system inspection.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Visual exhaust system inspection. 202.22 Section 202.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE... Standards § 202.22 Visual exhaust system inspection. No motor carrier subject to these regulations...

  5. 40 CFR 55.8 - Monitoring, reporting, inspections, and compliance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Monitoring, reporting, inspections, and compliance. 55.8 Section 55.8 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) OUTER CONTINENTAL SHELF AIR REGULATIONS § 55.8 Monitoring, reporting, inspections,...

  6. 9 CFR 318.309 - Finished product inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... be handled according to: (1) A HACCP plan for canned product that addresses hazards associated with... this section. (b)-(c) (d) Procedures for handling finished product inspections where the HACCP plan...

  7. 14 CFR 145.155 - Inspection personnel requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Inspection personnel requirements. 145.155 Section 145.155 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Personnel § 145.155 Inspection...

  8. CASS Ferrite and Grain Structure Relationship

    SciTech Connect

    Ruud, Clayton O.; Ramuhalli, Pradeep; Meyer, Ryan M.; Diaz, Aaron A.; Anderson, Michael T.

    2016-07-13

    This document summarizes the results of research conducted at Pacific Northwest National Laboratory (PNNL) to determine whether, based on experimental measurements, a correlation existed between grain structure in cast austenitic stainless steel (CASS) piping and ferrite content of the casting alloy. The motivation for this research lies in the fact that ultrasonic testing (UT) is strongly influenced by CASS grain structure; knowledge of this grain structure may help improve the ability to interpret UT responses, thereby improving the overall reliability of UT inspections of CASS components.

  9. 9 CFR 381.223 - Control and disposition of nonfederally inspected poultry products in States designated under...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... nonfederally inspected poultry products in States designated under paragraph 5(c) of the Act. 381.223 Section... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Special Provisions for Designated...

  10. 9 CFR 381.223 - Control and disposition of nonfederally inspected poultry products in States designated under...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... nonfederally inspected poultry products in States designated under paragraph 5(c) of the Act. 381.223 Section... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Special Provisions for Designated...

  11. 9 CFR 381.223 - Control and disposition of nonfederally inspected poultry products in States designated under...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... nonfederally inspected poultry products in States designated under paragraph 5(c) of the Act. 381.223 Section... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Special Provisions for Designated...

  12. 9 CFR 381.223 - Control and disposition of nonfederally inspected poultry products in States designated under...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... nonfederally inspected poultry products in States designated under paragraph 5(c) of the Act. 381.223 Section... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Special Provisions for Designated...

  13. 9 CFR 381.223 - Control and disposition of nonfederally inspected poultry products in States designated under...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... nonfederally inspected poultry products in States designated under paragraph 5(c) of the Act. 381.223 Section... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Special Provisions for Designated...

  14. 40 CFR 763.176 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Inspections. 763.176 Section 763.176 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT ASBESTOS Prohibition of the Manufacture, Importation, Processing, and Distribution in Commerce of Certain...

  15. 40 CFR 745.237 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Inspections. 745.237 Section 745.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities §...

  16. 40 CFR 745.237 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Inspections. 745.237 Section 745.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities §...

  17. 40 CFR 745.237 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Inspections. 745.237 Section 745.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities §...

  18. 40 CFR 745.237 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Inspections. 745.237 Section 745.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities §...

  19. 40 CFR 745.237 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Inspections. 745.237 Section 745.237 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Lead-Based Paint Activities §...

  20. 40 CFR 265.403 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Chemical... must inspect, where present: (1) Discharge control and safety equipment (e.g., waste feed...

  1. Interstellar grains within interstellar grains

    NASA Technical Reports Server (NTRS)

    Bernatowicz, Thomas J.; Amari, Sachiko; Zinner, Ernst K.; Lewis, Roy S.

    1991-01-01

    Five interstellar graphite spherules extracted from the Murchison carbonaceous meteorite are studied. The isotopic and elemental compositions of individual particles are investigated with the help of an ion microprobe, and this analysis is augmented with structural studies of ultrathin sections of the grain interiors by transmission electron microscopy. As a result, the following procedure for the formation of the interstellar graphite spherule bearing TiC crystals is inferred: (1) high-temperature nucleation and rapid growth of the graphitic carbon spherule in the atmosphere of a carbon-rich star, (2) nucleation and growth of TiC crystals during continued growth of the graphitic spherule and the accretion of TiC onto the spherule, (3) quenching of the graphite growth process by depletion of C or by isolation of the spherule before other grain types could condense.

  2. Software Formal Inspections Guidebook

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

  3. Electronic Inspection of Beef

    NASA Technical Reports Server (NTRS)

    Anselmo, Victor J.; Gammell, Paul M.; Clark, Jerry

    1987-01-01

    Two proposed methods for grading beef quality based on inspection by electronic equipment: one method uses television camera to generate image of a cut of beef as customer sees it; other uses ultrasonics to inspect live animal or unsliced carcasses. Both methods show promise for automated meat inspection.

  4. Software Formal Inspections Standard

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This Software Formal Inspections Standard (hereinafter referred to as Standard) is applicable to NASA software. This Standard defines the requirements that shall be fulfilled by the software formal inspections process whenever this process is specified for NASA software. The objective of this Standard is to define the requirements for a process that inspects software products to detect and eliminate defects as early as possible in the software life cycle. The process also provides for the collection and analysis of inspection data to improve the inspection process as well as the quality of the software.

  5. 78 FR 24666 - Updates to the List of Plant Inspection Stations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-26

    ... Animal and Plant Health Inspection Service 7 CFR Part 319 Updates to the List of Plant Inspection Stations AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Final rule. SUMMARY: We are amending the regulations governing the importation of plants for planting to remove the entries for...

  6. 78 FR 77643 - National Advisory Committee of Meat and Poultry Inspection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ... Food Safety and Inspection Service National Advisory Committee of Meat and Poultry Inspection AGENCY... Poultry Inspection (NACMPI). The Committee is being convened to review two topics for FSIS. The first... committee to fully explore enhancing the safe food handling label on meat and poultry packages. With...

  7. 76 FR 81360 - Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry Products; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-28

    ... Programs: Interstate Shipment of Meat and Poultry Products; Correction AGENCY: Food Safety and Inspection... small State-inspected establishments will be eligible to ship meat and poultry products in interstate..., ``Cooperative Inspection Programs; Interstate Shipment of Meat and Poultry Products'' (76 FR 24714). The...

  8. 9 CFR 354.161 - Requirements as to manner of inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF... shall include post-mortem examination of each rabbit carcass during the evisceration operation. (c)...

  9. 75 FR 53736 - Notice of National Grain Car Council Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-01

    ...-No. 4)] Notice of National Grain Car Council Meeting AGENCY: Surface Transportation Board, DOT. ACTION: Notice of National Grain Car Council meeting. SUMMARY: Notice is hereby given of a meeting of the National Grain Car Council (NGCC), pursuant to section 10(a)(2) of the Federal Advisory Committee Act,...

  10. 78 FR 52606 - Notice of National Grain Car Council Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-23

    ... Surface Transportation Board Notice of National Grain Car Council Meeting AGENCY: Surface Transportation Board, DOT. ACTION: Notice of National Grain Car Council meeting. SUMMARY: Notice is hereby given of a meeting of the National Grain Car Council (NGCC), pursuant to the Federal Advisory Committee Act, 5...

  11. 77 FR 11742 - Approval and Promulgation of Implementation Plans; New York; Motor Vehicle Enhanced Inspection...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-28

    ... Inspection and Maintenance Program AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY... to New York's motor vehicle enhanced inspection and maintenance program that would eliminate the... regulations and because the revision will not interfere with attainment or maintenance of the national...

  12. 77 FR 13122 - Agency Information Collection Activities; Proposed Collection; Comment Request; Data Reporting...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... Requirements for State and Local Vehicle Emission Inspection and Maintenance (I/M) Programs AGENCY... Local Vehicle Emission Inspection and Maintenance (I/M) Programs. ICR numbers: EPA ICR No. 1613.03,...

  13. 78 FR 73871 - Agency Information Collection Activities: Proposed Collection; Comment Request; Federal Emergency...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ...; Comment Request; Federal Emergency Management Agency Housing Inspection Services Customer Satisfaction... comments concerning the housing inspection services customer satisfaction survey. DATES: Comments must be... customers to determine the kind and quality of services requested and their level of satisfaction...

  14. Optical fiber inspection system

    DOEpatents

    Moore, F.W.

    1985-04-05

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected. 10 figs.

  15. Optical fiber inspection system

    DOEpatents

    Moore, Francis W.

    1987-01-01

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected.

  16. 9 CFR 381.131 - Preparation of labeling or other devices bearing official inspection marks without advance...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... requirements approved by the Office of Management and Budget under control number 0583-0015)...

  17. 75 FR 36371 - Agency Information Collection Activities Under OMB Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-25

    ... From the Federal Register Online via the Government Publishing Office COMMODITY FUTURES TRADING COMMISSION Agency Information Collection Activities Under OMB Review AGENCY: Commodity Futures Trading Commission. ACTION: Notice; Information Collection 3038-0019, Stocks of Grain in Licensed Warehouses....

  18. MACS as a tool for international inspections

    SciTech Connect

    Curtiss, J.A.; Indusi, J.P.

    1995-08-01

    The MACS/ACRS (Managed Access by Controlled Sensing/Access by Controlled Remote Sensing) system is a collection of communication devices, video capability, and distance-measuring equipment which can effectively substitute for the physical presence of a challenge inspector within a facility. The MACS design allows growth of the prototype, developed in response to the Chemical Weapons Convention (CWC), into a versatile device for inspection of sensitive nuclear facilities under other international arrangements, for example the proposed Fissile Material Cutoff Convention. A MACS/ACRS-type system in a standard, international-recognized configuration could resolve sensitive information and safety concerns through providing a means of achieving the goals of an inspection while excluding the inspector. We believe the technology used to develop MACS for the Defense Nuclear Agency, followed by ACRS for the Department of Energy, is universally adaptable for minimally-intrusive managed-access international inspections of sensitive sites.

  19. Fire Prevention Inspection Procedures.

    ERIC Educational Resources Information Center

    Pribyl, Paul F.

    Lesson plans are provided for a fire prevention inspection course of the Wisconsin Fire Service Training program. Objectives for the course are to enable students to describe and conduct fire prevention inspections, to identify and correct hazards common to most occupancies, to understand the types of building construction and occupancy, and to…

  20. PAIR (Planning and Analysis of Inspection Resources)

    SciTech Connect

    Teichmann, T.; Santaniello, A.; Fishbone, L.G.

    1994-03-01

    The safeguards inspection effort of the International Atomic Energy Agency consists of the efforts for the Physical Inventory Verifications to close the annual material balance, Interim Inventory Verifications, conducted mainly to satisfy the Timeliness Criteria, Flow Verifications to verify the transfer of material, and Containment and Surveillance activities, which help preserve continuity of knowledge concerning the material. Estimating the requiring overall future inspection effort under a variety of conditions is an important part of Agency planning. As exemplified by the sample results provides a straightforward means to analyze `What if` situations in safeguards implementation. It thereby permits managers and analysts to study future scenarios and their effect on human resources. It is planned to introduce into PAIR a direct capability for studying costs associated with these hypothetical changes in safeguards implementation. In this way PAIR could more easily assist the Safeguards Department in its current program of investigating new safeguards approaches.

  1. In-Space Inspection Technologies Vision

    NASA Technical Reports Server (NTRS)

    Studor, George

    2012-01-01

    Purpose: Assess In-Space NDE technologies and needs - current & future spacecraft. Discover & build on needs, R&D & NDE products in other industries and agencies. Stimulate partnerships in & outside NASA to move technologies forward cooperatively. Facilitate group discussion on challenges and opportunities of mutual benefit. Focus Areas: Miniaturized 3D Penetrating Imagers Controllable Snake-arm Inspection systems Miniature Free-flying Micro-satellite Inspectors

  2. Looking for Multiple Scattering Effects in Backscattered Ultrasonic Grain Noise from Jet-Engine Nickel Alloys

    NASA Astrophysics Data System (ADS)

    Margetan, F. J.; Haldipur, Pranaam; Yu, Linxiao; Thompson, R. B.

    2005-04-01

    For pulse/echo inspections of metals, models which predict backscattered noise characteristics often make a "single-scattering" assumption, i.e., multiple-scattering events in which sound is scattered from one grain to another before returning to the transducer are ignored. Models based on the single-scattering assumption have proven to be very useful in simulating inspections of engine-alloy billets and forgings. However, this assumption may not be accurate if grain scattering is too "strong" (e.g., if the mean grain diameter and/or the inspection frequency is too large). In this work, backscattered grain noise measurements and analyses were undertaken to search for evidence of significant multiple scattering in pulse/echo inspections of jet-engine Nickel alloys. At or above about 7 MHz frequency and 50 micron grain diameter, problems were seen with single-scattering noise models that are likely due to the neglect of multiple scattering by the models. The modeling errors were less severe for focused-probe measurements in the focal zone than for planar probe inspections. Single-scattering noise models are likely adequate for simulating current billet inspections which are carried out using 5-MHz focused transducers. However, multiple scattering effects should be taken into account in some fashion when simulating higher-frequency inspections of Nickel-alloy billets having large mean grain diameters (> 40 microns).

  3. Grain Grading and Handling.

    ERIC Educational Resources Information Center

    Rendleman, Matt; Legacy, James

    This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

  4. Iraq hedges on arms inspections; CIA warns of ongoing programs

    SciTech Connect

    Wolfsthal, J.

    1992-12-01

    International inspection terms received distinctly mixed signals from Iraqi officials during December inspection visits. Iraq's liasion to U.N. Special Commission (UNSCOM) inspection teams told the head of an UNSCOM chemical and biological weapons team that began a visit December 5 that Iraqi citizens would like to drink the blood' of the inspectors, and that Iraq would no longer cooperate with U.N. weapon inspection activities. An International Atomic Energy Agency (IAEA) nuclear inspection team in Iraq at the same time, however, was told by its chief Iraqi liasion officer that Baghdad was finally willing to answer questions about Iraq's foreign procurement network for nuclear equipment and technology. These contradictory developments came only days before the head of U.S. Intelligence made renewed allegations about Iraq's weapons capabilities.

  5. Guidelines for software inspections

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Quality control inspections are software problem finding procedures which provide defect removal as well as improvements in software functionality, maintenance, quality, and development and testing methodology is discussed. The many side benefits include education, documentation, training, and scheduling.

  6. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W.T.; Appel, D.K.; Park, L.R.

    1995-03-21

    An inspection rabbit is described for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON{trademark}). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system. 6 figures.

  7. Remote surface inspection system

    NASA Technical Reports Server (NTRS)

    Hayati, S.; Balaram, J.; Seraji, H.; Kim, W. S.; Tso, K.; Prasad, V.

    1993-01-01

    This paper reports on an on-going research and development effort in remote surface inspection of space platforms such as the Space Station Freedom (SSF). It describes the space environment and identifies the types of damage for which to search. This paper provides an overview of the Remote Surface Inspection System that was developed to conduct proof-of-concept demonstrations and to perform experiments in a laboratory environment. Specifically, the paper describes three technology areas: (1) manipulator control for sensor placement; (2) automated non-contact inspection to detect and classify flaws; and (3) an operator interface to command the system interactively and receive raw or processed sensor data. Initial findings for the automated and human visual inspection tests are reported.

  8. Apparatus for inspecting piping

    DOEpatents

    Zollingger, W. Thor; Appel, D. Keith; Park, Larry R.

    1995-01-01

    An inspection rabbit for inspecting piping systems having severe bends therein. The rabbit consists of a flexible, modular body containing a miniaturized eddy current inspection probe, a self-contained power supply for proper operation of the rabbit, an outer surface that allows ease of movement through piping systems and means for transmitting data generated by the inspection device. The body is preferably made of flexible polyvinyl chloride (PVC) tubing or, alternatively, silicone rubber with a shrink wrapping of polytetrafluoroethylene (TEFLON.RTM.). The body is formed to contain the power supply, preferably a plurality of batteries, and a spool of communication wire that connects to a data processing computer external to the piping system.

  9. Nuclear Plant Inspection

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Engineers from the Power Authority of the State of New York use a Crack Growth Analysis Program supplied by COSMIC (Computer Software Management and Information Center) in one stage of nuclear plant inspection. Welds of the nuclear steam supply system are checked for cracks; radiographs, dye penetration and visual inspections are performed to locate cracks in the metal structure and welds. The software package includes three separate crack growth analysis models and enables necessary repairs to be planned before serious problems develop.

  10. Wedges for ultrasonic inspection

    DOEpatents

    Gavin, Donald A.

    1982-01-01

    An ultrasonic transducer device is provided which is used in ultrasonic inspection of the material surrounding a threaded hole and which comprises a wedge of plastic or the like including a curved threaded surface adapted to be screwed into the threaded hole and a generally planar surface on which a conventional ultrasonic transducer is mounted. The plastic wedge can be rotated within the threaded hole to inspect for flaws in the material surrounding the threaded hole.

  11. Source Inspection Scheduling Calendar

    NASA Technical Reports Server (NTRS)

    Hollis, Brayden

    2011-01-01

    Quality is an essential component for creating flight hardware travelling through space since the hardware is extremely expensive and cannot be reworked or repaired once launched. An important step in this process is ensuring the quality of hardware procured from Jet Propulsion Laboratory's (JPL) suppliers. An important element of determining supplier quality is source inspection. Source inspections are performed at suppliers' facilities by JPL employeesto ensure that hardware characteristics are acceptable before being covered up and/or delivered to JPL.

  12. 7 CFR 800.75 - Kinds of official inspection and weighing services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... or with one or more other services. Approval of the stowage space is required for official sample-lot... certificated according to § 800.160. (b) Official sample-lot inspection service. This service consists of official personnel (1) sampling an identified lot of grain and (2) analyzing the grain sample for...

  13. 9 CFR 390.8 - Agency response to requests.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Agency response to requests. 390.8 Section 390.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND...

  14. 9 CFR 390.8 - Agency response to requests.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Agency response to requests. 390.8 Section 390.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND...

  15. 9 CFR 390.8 - Agency response to requests.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Agency response to requests. 390.8 Section 390.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND...

  16. 9 CFR 390.8 - Agency response to requests.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Agency response to requests. 390.8 Section 390.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND...

  17. 9 CFR 390.8 - Agency response to requests.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Agency response to requests. 390.8 Section 390.8 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND...

  18. 9 CFR 390.9 - Communications with State and other Federal government agencies.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Federal government agencies. 390.9 Section 390.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF...) The Administrator of the Food Safety and Inspection Service (FSIS), or designee, may authorize...

  19. 9 CFR 390.9 - Communications with State and other Federal government agencies.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Federal government agencies. 390.9 Section 390.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF...) The Administrator of the Food Safety and Inspection Service (FSIS), or designee, may authorize...

  20. 9 CFR 390.9 - Communications with State and other Federal government agencies.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Federal government agencies. 390.9 Section 390.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF...) The Administrator of the Food Safety and Inspection Service (FSIS), or designee, may authorize...

  1. 9 CFR 390.9 - Communications with State and other Federal government agencies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Federal government agencies. 390.9 Section 390.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF...) The Administrator of the Food Safety and Inspection Service (FSIS), or designee, may authorize...

  2. 9 CFR 390.9 - Communications with State and other Federal government agencies.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Federal government agencies. 390.9 Section 390.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF...) The Administrator of the Food Safety and Inspection Service (FSIS), or designee, may authorize...

  3. 75 FR 29779 - Agency Information Collection Activities: Proposed Collection; Comment Request, 1660-0102...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-27

    ... 007-0-1, Federal Emergency Management Agency Housing Inspection Services Customer Satisfaction Survey... customers to determine the kind and quality of services they want and their level of satisfaction with... Housing Inspection Services Customer Satisfaction Survey. Abstract: FEMA Housing Inspection...

  4. Government Agencies

    DTIC Science & Technology

    1988-05-01

    manufacturers. The Navy has a major in- house design capability for ships; the government does not possess such a capability for aircraft or other weapon systems...the Coast Guard, government agencies acquire a wide variety of ships, ranging from sophisticated submarines and nuclear aircraft carriers to much...the initial phase a review was made of written material relating to government procedures in U.S. Government agencies for acquiring vessels, aircraft

  5. Piping inspection round robin

    SciTech Connect

    Heasler, P.G.; Doctor, S.R.

    1996-04-01

    The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths.

  6. 78 FR 58383 - Renewal of National Grain Car Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-23

    ... Surface Transportation Board Renewal of National Grain Car Council AGENCY: Surface Transportation Board... Board intends to renew the charter of the National Grain Car Council (NGCC). ADDRESSES: A copy of the... 14 members from the Class I railroads (one marketing and one car management representative from...

  7. 76 FR 59186 - Renewal of National Grain Car Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ... Surface Transportation Board Renewal of National Grain Car Council AGENCY: Surface Transportation Board... Board intends to renew the charter of the National Grain Car Council (NGCC). ADDRESSES: A copy of the... marketing and one car management representative from each Class I), 7 representatives from Class II and...

  8. Advances in inspection automation

    NASA Astrophysics Data System (ADS)

    Weber, Walter H.; Mair, H. Douglas; Jansen, Dion; Lombardi, Luciano

    2013-01-01

    This new session at QNDE reflects the growing interest in inspection automation. Our paper describes a newly developed platform that makes the complex NDE automation possible without the need for software programmers. Inspection tasks that are tedious, error-prone or impossible for humans to perform can now be automated using a form of drag and drop visual scripting. Our work attempts to rectify the problem that NDE is not keeping pace with the rest of factory automation. Outside of NDE, robots routinely and autonomously machine parts, assemble components, weld structures and report progress to corporate databases. By contrast, components arriving in the NDT department typically require manual part handling, calibrations and analysis. The automation examples in this paper cover the development of robotic thickness gauging and the use of adaptive contour following on the NRU reactor inspection at Chalk River.

  9. IR Spot Weld Inspect

    SciTech Connect

    Chen, Jian; Feng, Zhili

    2014-01-01

    In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, data analysis, weld quality database generation and weld quality prediction, etc.

  10. Marketing Farm Grain Crops.

    ERIC Educational Resources Information Center

    Ridenour, Harlan E.

    This vocational agriculture curriculum on grain marketing contains three parts: teacher guide, student manual, and student workbook. All three are coordinated and cross-referenced. The course is designed to give students of grain marketing a thorough background in the subject and provide practical help in developing grain marketing strategies for…

  11. 76 FR 55363 - Proposed Information Collection; Comment Request; Seafood Inspection and Certification Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Proposed Information Collection; Comment Request; Seafood Inspection and Certification Requirements AGENCY: National Oceanic and Atmospheric Administration...

  12. Guidance for Conducting Risk Management Program Inspections Under Clean Air Act Section 112(r)

    EPA Pesticide Factsheets

    This guidance is for implementing agencies that conduct inspections of facilities (i.e., stationary sources) subject to 40 CFR Part 68, which requires development and implementation of a Risk Management Plan.

  13. 77 FR 69508 - Inservice Inspection of Prestressed Concrete Containment Structures With Grouted Tendons

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-19

    ... COMMISSION Inservice Inspection of Prestressed Concrete Containment Structures With Grouted Tendons AGENCY... Concrete Containment Structures with Grouted Tendons.'' This guide describes a method that the NRC staff considers acceptable for use in developing an appropriate surveillance program for prestressed...

  14. 77 FR 45417 - Pipeline Safety: Inspection and Protection of Pipeline Facilities After Railway Accidents

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Pipeline Safety: Inspection and Protection of Pipeline Facilities After Railway Accidents AGENCY: Pipeline and Hazardous Materials Safety...

  15. 76 FR 48796 - Plan for Estimating Daily Livestock Slaughter Under Federal Inspection; Request for Extension of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-09

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF AGRICULTURE Agricultural Marketing Service Plan for Estimating Daily Livestock Slaughter Under Federal Inspection; Request for Extension of a Currently Approved Information Collection AGENCY: Agricultural Marketing...

  16. 9 CFR 304.2 - Information to be furnished; grant or refusal of inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Information to be furnished; grant or refusal of inspection. 304.2 Section 304.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  17. 14 CFR 1206.402 - Documents available for inspection at NASA Information Centers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... index thereto; (9) Copies of Environmental Impact Statements filed by NASA under the National... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Documents available for inspection at NASA... Agency Records § 1206.402 Documents available for inspection at NASA Information Centers. (a) Each...

  18. 9 CFR 304.2 - Information to be furnished; grant or refusal of inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Information to be furnished; grant or refusal of inspection. 304.2 Section 304.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  19. 9 CFR 304.2 - Information to be furnished; grant or refusal of inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Information to be furnished; grant or refusal of inspection. 304.2 Section 304.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  20. 9 CFR 304.2 - Information to be furnished; grant or refusal of inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Information to be furnished; grant or refusal of inspection. 304.2 Section 304.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  1. 9 CFR 304.2 - Information to be furnished; grant or refusal of inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Information to be furnished; grant or refusal of inspection. 304.2 Section 304.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  2. 76 FR 12941 - Proposed Information Collection; Comment Request; Virginia Modified Pound Net Leader Inspection...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-09

    ... Modified Pound Net Leader Inspection Program AGENCY: National Oceanic and Atmospheric Administration (NOAA... program for modified pound net leaders in the Virginia waters of the mainstem Chesapeake Bay. Pound net..., they must allow for the inspection of gear to ensure the modified leader meets the definition of...

  3. 40 CFR 59.698 - May EPA enter my facilities for inspections?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false May EPA enter my facilities for inspections? 59.698 Section 59.698 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... described in this section. We will not try to inspect if we learn that local law prohibits it, but we...

  4. 77 FR 12202 - Public Inspection of Material Relating to Tax-Exempt Organizations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-29

    ... Internal Revenue Service 26 CFR Part 301 RIN 1545-BG60 Public Inspection of Material Relating to Tax-Exempt Organizations AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Final regulations. SUMMARY: This... made available by the IRS for public inspection under the Internal Revenue ] Code (Code). The...

  5. 40 CFR Appendix III to Subpart S... - As-Received Inspection

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... III to Subpart S of Part 86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...-Duty Trucks, and Complete Otto-Cycle Heavy-Duty Vehicles Pt. 86, Subpt. S, App. III Appendix III to Subpart S of Part 86—As-Received Inspection Items to be recorded at time of Initial Inspection of...

  6. 78 FR 3851 - Increase in Fees for Voluntary Federal Dairy Grading and Inspection Services

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-17

    ... Dairy Grading and Inspection Services AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed... Federal dairy grading and inspection services. The fee increases proposed are 15 percent during fiscal year (FY) 2013 and 5 percent during FY 2014. These fees were last adjusted in 2006. Dairy grading...

  7. 40 CFR Appendix III to Subpart S... - As-Received Inspection

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... III to Subpart S of Part 86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...-Duty Trucks, and Complete Otto-Cycle Heavy-Duty Vehicles Pt. 86, Subpt. S, App. III Appendix III to Subpart S of Part 86—As-Received Inspection Items to be recorded at time of Initial Inspection of...

  8. 40 CFR 267.15 - What are my general inspection requirements?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements? 267.15 Section 267.15 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... STANDARDIZED PERMIT General Facility Standards § 267.15 What are my general inspection requirements? (a) You... follow a written schedule for inspecting, monitoring equipment, safety and emergency equipment,...

  9. 14 CFR 1206.402 - Documents available for inspection at NASA Information Centers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Documents available for inspection at NASA... Agency Records § 1206.402 Documents available for inspection at NASA Information Centers. (a) Each NASA...) A master list and index of NASA Issuances, and a copy of all such issuances; (4) A list and index...

  10. 14 CFR 1206.402 - Documents available for inspection at NASA Information Centers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Documents available for inspection at NASA... Agency Records § 1206.402 Documents available for inspection at NASA Information Centers. (a) Each NASA...) A master list and index of NASA Issuances, and a copy of all such issuances; (4) A list and index...

  11. 14 CFR 1206.402 - Documents available for inspection at NASA Information Centers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Documents available for inspection at NASA... Agency Records § 1206.402 Documents available for inspection at NASA Information Centers. (a) Each NASA...) A master list and index of NASA Issuances, and a copy of all such issuances; (4) A list and index...

  12. 14 CFR § 1206.402 - Documents available for inspection at NASA Information Centers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Documents available for inspection at NASA... Agency Records § 1206.402 Documents available for inspection at NASA Information Centers. (a) Each NASA...) A master list and index of NASA Issuances, and a copy of all such issuances; (4) A list and index...

  13. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  14. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  15. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  16. 9 CFR 416.17 - Agency verification.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Agency verification. 416.17 Section 416.17 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... (d) Direct observation or testing to assess the sanitary conditions in the establishment....

  17. 9 CFR 416.17 - Agency verification.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Agency verification. 416.17 Section 416.17 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... (d) Direct observation or testing to assess the sanitary conditions in the establishment....

  18. 9 CFR 416.17 - Agency verification.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Agency verification. 416.17 Section 416.17 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... (d) Direct observation or testing to assess the sanitary conditions in the establishment....

  19. Pre-Demolition Inspections

    EPA Pesticide Factsheets

    A pre-demolition inspection may be one of the most helpful and cost-efficient steps you can take to identify materials that should (or must) be removed from buildings prior to demolition. In some cases it may be required by regulation.

  20. Playground Inspection & Maintenance.

    ERIC Educational Resources Information Center

    Leeds, Gerard

    People today demand a safer work environment and a safer play environment for children. Accidents such as broken arms are no longer accepted as an inevitable part of growing up. This paper presents recommendations for the maintenance of safe playground areas and equipment, covering three main areas: (1) inspections, which should follow a specified…

  1. Intelligent inspection system

    NASA Astrophysics Data System (ADS)

    May, Jeniece; Dale, Ken; Holloway, Mike; Gaby, Willard

    1997-01-01

    The intelligent inspection system is an advanced controller and analysis system for dimensional measuring machines dedicated to measuring surface of revolution mechanical parts. IIS was developed by the Lockheed Martin Energy Systems, Inc. Oak Ridge Y-12 plant because no commercial product was available to replace the obsolete computing systems on these important machines.

  2. Innovative Inspection Techniques

    DTIC Science & Technology

    1993-01-01

    Typical Headlamps ...................................... 23 Table 5 Typical Personal Flashlights ................................ 24 Table 6 Characteristics...increasingly large volume of constantly changing regulatory and reference materials are among the examples of administrative workload which inspectors referred...and reference materials would provide more benefits than the use of advanced NDT technology in inspections. As a general rule, inspectors felt that

  3. Inspecting Magic Words.

    ERIC Educational Resources Information Center

    White, John Howell

    1998-01-01

    Considers neopragmatism's use-value for art educators as they inspect the magic words, images, and practices that influence curriculum and instruction. Explains that neopragmatism offers art educators three concepts (contingency, demystification, and recontextualization) as tools to interpret educational beliefs and classroom practices. (CMK)

  4. Ofsted Re-Inspected

    ERIC Educational Resources Information Center

    Coffield, Frank

    2012-01-01

    The author never thought he would have to thank Ofsted for a change in its approach that may result in a major improvement in provision; and yet, with the introduction of the revised Common Inspection Framework (CIF), it has made teaching and learning (T&L) the first priority throughout the learning and skills sector. While he wishes to…

  5. Remote Inspection Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2013-01-01

    The ability to remotely inspect equipment of an aging infrastructure is becoming of major interest to many industries. Often the ability to just get a look at a piece of critical equipment can yield very important information. With millions of miles of piping installed throughout the United States, this vast network is critical to oil, natural…

  6. Additive Manufacturing Infrared Inspection

    NASA Technical Reports Server (NTRS)

    Gaddy, Darrell

    2014-01-01

    Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

  7. 7 CFR 735.108 - Inspections and examinations of warehouses.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 7 2014-01-01 2014-01-01 false Inspections and examinations of warehouses. 735.108 Section 735.108 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE REGULATIONS FOR WAREHOUSES REGULATIONS FOR THE UNITED STATES WAREHOUSE...

  8. 7 CFR 735.108 - Inspections and examinations of warehouses.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 7 2012-01-01 2012-01-01 false Inspections and examinations of warehouses. 735.108 Section 735.108 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE REGULATIONS FOR WAREHOUSES REGULATIONS FOR THE UNITED STATES WAREHOUSE...

  9. 7 CFR 762.123 - Insurance and farm inspection requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 7 2014-01-01 2014-01-01 false Insurance and farm inspection requirements. 762.123 Section 762.123 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS GUARANTEED FARM LOANS § 762.123 Insurance and farm...

  10. 40 CFR 63.148 - Leak inspection provisions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Leak inspection provisions. 63.148 Section 63.148 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... part 60, appendix A. (4) Calibration gases shall be as follows: (i) Zero air (less than 10 parts...

  11. 40 CFR 160.15 - Inspection of a testing facility.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Inspection of a testing facility. 160.15 Section 160.15 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE... not consider reliable for purposes of supporting an application for a research or marketing permit...

  12. Occupational Education for Meat Inspection and Laboratory Animal Caretaker Jobs.

    ERIC Educational Resources Information Center

    Mayer, Leon Albert

    To determine educational requirements and opportunities for employment, 60 representatives of animal laboratories and meat inspection agencies were interviewed in a 30-county area in northern Illinois. The chi-square test, analysis of variance test, and Pearson product moment correlation were utilized to conclude that: (1) Substantial…

  13. 9 CFR 381.22 - Conditions for receiving inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... have conducted a hazard analysis and developed and validated a HACCP plan, in accordance with §§ 417.2... exceed 90 days, during which period the establishment must validate its HACCP plan. (c) Before...

  14. 7 CFR 760.30 - Records and inspection thereof.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 7 2014-01-01 2014-01-01 false Records and inspection thereof. 760.30 Section 760.30 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Dairy Indemnity Payment Program General...

  15. 7 CFR 760.30 - Records and inspection thereof.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 7 2013-01-01 2013-01-01 false Records and inspection thereof. 760.30 Section 760.30 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Dairy Indemnity Payment Program General...

  16. 7 CFR 760.30 - Records and inspection thereof.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 7 2012-01-01 2012-01-01 false Records and inspection thereof. 760.30 Section 760.30 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Dairy Indemnity Payment Program General...

  17. 7 CFR 760.30 - Records and inspection thereof.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false Records and inspection thereof. 760.30 Section 760.30 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Dairy Indemnity Payment Program General...

  18. 7 CFR 760.30 - Records and inspection thereof.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Records and inspection thereof. 760.30 Section 760.30 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS INDEMNITY PAYMENT PROGRAMS Dairy Indemnity Payment Program General...

  19. Cast Stainless Steel Ferrite and Grain Structure

    SciTech Connect

    Ruud, Clayton O.; Ramuhalli, Pradeep; Meyer, Ryan M.; Mathews, Royce; Diaz, Aaron A.; Anderson, Michael T.

    2012-09-01

    In-service inspection requirements dictate that piping welds in the primary pressure boundary of light-water reactors be subject to a volumetric examination based on the rules contained within the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section XI. The purpose of the inspection is the reliable detection and accurate sizing of service-induced degradation and/or material flaws introduced during fabrication. The volumetric inspection is usually carried out using ultrasonic testing (UT) methods. However, the varied metallurgical macrostructures and microstructures of cast austenitic stainless steel piping and fittings, including statically cast stainless steel and centrifugally cast stainless steel (CCSS), introduce significant variations in the propagation and attenuation of ultrasonic energy. These variations complicate interpretation of the UT responses and may compromise the reliability of UT inspection. A review of the literature indicated that a correlation may exist between the microstructure and the delta ferrite content of the casting alloy. This paper discusses the results of a recent study where the goal was to determine if a correlation existed between measured and/or calculated ferrite content and grain structure in CCSS pipe.

  20. From Inspection to School Improvement? Evaluating the Accelerated Inspection Programme in Waltham Forest.

    ERIC Educational Resources Information Center

    Hopkins, David; Harris, Alma; Watling, Rob; Beresford, John

    1999-01-01

    Outlines the main findings from the evaluation of the Accelerated Inspection Programme (AIP) in Waltham Forest under three main phases (pre-inspection, inspection, and post inspection). Focuses on the relationship between inspection and school improvement. Discusses the recommendations. (CMK)

  1. Flexible ultrasonic pipe inspection apparatus

    DOEpatents

    Jenkins, C.F.; Howard, B.D.

    1994-01-01

    Pipe crawlers, pipe inspection {open_quotes}rabbits{close_quotes} and similar vehicles are widely used for inspecting the interior surfaces of piping systems, storage tanks and process vessels for damaged or flawed structural features. This paper describes the design of a flexible, modular ultrasonic pipe inspection apparatus.

  2. Multi-Sensor Inspection Telerobot

    NASA Technical Reports Server (NTRS)

    Balaram, J.; Hayati, S.; Volpe, R.

    1994-01-01

    This paper describes a telerobotic multi-sensor inspection system for space platforms developed at the Jet Propulsion Laboratory. A multi-sensor inspection end-effector incorporates cameras and lighting for visual inspection, as well as temperature and gas leak-detection sensors.

  3. 7 CFR 29.40 - Mandatory inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.40 Mandatory inspection. Inspection authorized or required under section 5 of the Act or Section 759 of the Appropriations Act. definitions...

  4. 23 CFR 650.313 - Inspection procedures.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.313 Inspection procedures. (a) Inspect each bridge in accordance with the inspection procedures in the AASHTO Manual (incorporated...

  5. 23 CFR 650.313 - Inspection procedures.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.313 Inspection procedures. (a) Inspect each bridge in accordance with the inspection procedures in the AASHTO Manual (incorporated...

  6. Overview of the software inspection process

    SciTech Connect

    Lane, G.L.; Dabbs, R.

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  7. Industrial Inspection System

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Lixi, Inc. has built a thriving business on NASA-developed x-ray technology. The Low Intensity X-ray Imaging scope (LIXI) was designed to use less than one percent of radiation required by conventional x-ray devices. It is portable and can be used for a variety of industrial inspection systems as well as medical devices. A food processing plant uses the new LIXI Conveyor system to identify small bone fragments in chicken. The chicken packages on a conveyor belt enter an x-ray chamber and the image is displayed on a monitor. Defects measuring less than a millimeter can be detected. An important advantage of the system is its ability to inspect 100 percent of the product right on the production line.

  8. 75 FR 8919 - Federal Consistency Appeal by Pan American Grain Co.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-26

    ... National Oceanic and Atmospheric Administration Federal Consistency Appeal by Pan American Grain Co. AGENCY.... SUMMARY: This announcement provides notice that Pan American Grain Co., has filed an administrative appeal...@noaa.gov . SUPPLEMENTARY INFORMATION: I. Notice of Appeal On January 27, 2010, Pan American Grain...

  9. 75 FR 47262 - Federal Consistency Appeal by Pan American Grain Co.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-05

    ... National Oceanic and Atmospheric Administration Federal Consistency Appeal by Pan American Grain Co. AGENCY... administrative appeal filed by Pan American Grain Co. (Pan American). DATES: The decision record for the Pan... gcos.inquiries@noaa.gov . SUPPLEMENTARY INFORMATION: On January 27, 2010, Pan American Grain Co....

  10. Nondestructive inspection perspectives

    NASA Technical Reports Server (NTRS)

    Froom, Douglas A.

    1992-01-01

    This paper presents ideas for consideration by those concerned with commercial aircraft nondestructive inspection (NDI). The perspective is that of an individual with a background in military aircraft NDI, and important differences are indicated between the commercial NDI and military NDI activities. In particular, it is significantly more expensive to implement some new NDI technology, and therefore, in-depth cost-benifit studies for commercial users are recommended.

  11. Infrared microscope inspection apparatus

    DOEpatents

    Forman, Steven E.; Caunt, James W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface.

  12. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  13. Inspection tester for explosives

    DOEpatents

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2010-10-05

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  14. Waste Inspection Tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-12-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU. The mobile feature of WIT allows inspection technologies to be brought to the nuclear waste drum storage site without the need to relocate drums for safe, rapid, and cost-effective characterization of regulated nuclear waste. The combination of these WIT characterization modalities provides the inspector with an unprecedented ability to non-invasively characterize the regulated contents of waste drums as large as 110 gallons, weighing up to 1,600 pounds. Any objects that fit within these size and weight restrictions can also be inspected on WIT, such as smaller waste bags and drums that are five and thirty-five gallons.

  15. Code inspection instructional validation

    NASA Technical Reports Server (NTRS)

    Orr, Kay; Stancil, Shirley

    1992-01-01

    The Shuttle Data Systems Branch (SDSB) of the Flight Data Systems Division (FDSD) at Johnson Space Center contracted with Southwest Research Institute (SwRI) to validate the effectiveness of an interactive video course on the code inspection process. The purpose of this project was to determine if this course could be effective for teaching NASA analysts the process of code inspection. In addition, NASA was interested in the effectiveness of this unique type of instruction (Digital Video Interactive), for providing training on software processes. This study found the Carnegie Mellon course, 'A Cure for the Common Code', effective for teaching the process of code inspection. In addition, analysts prefer learning with this method of instruction, or this method in combination with other methods. As is, the course is definitely better than no course at all; however, findings indicate changes are needed. Following are conclusions of this study. (1) The course is instructionally effective. (2) The simulation has a positive effect on student's confidence in his ability to apply new knowledge. (3) Analysts like the course and prefer this method of training, or this method in combination with current methods of training in code inspection, over the way training is currently being conducted. (4) Analysts responded favorably to information presented through scenarios incorporating full motion video. (5) Some course content needs to be changed. (6) Some content needs to be added to the course. SwRI believes this study indicates interactive video instruction combined with simulation is effective for teaching software processes. Based on the conclusions of this study, SwRI has outlined seven options for NASA to consider. SwRI recommends the option which involves creation of new source code and data files, but uses much of the existing content and design from the current course. Although this option involves a significant software development effort, SwRI believes this option

  16. Infrared microscope inspection apparatus

    DOEpatents

    Forman, S.E.; Caunt, J.W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface. 4 figs.

  17. Modelling grain-scattered ultrasound in austenitic stainless-steel welds: A hybrid model

    SciTech Connect

    Nowers, O.; Duxbury, D. J.; Velichko, A.; Drinkwater, B. W.

    2015-03-31

    The ultrasonic inspection of austenitic stainless steel welds can be challenging due to their coarse grain structure, charaterised by preferentially oriented, elongated grains. The anisotropy of the weld is manifested as both a ‘steering’ of the beam and the back-scatter of energy due to the macroscopic granular structure of the weld. However, the influence of weld properties, such as mean grain size and orientation distribution, on the magnitude of scattered ultrasound is not well understood. A hybrid model has been developed to allow the study of grain-scatter effects in austenitic welds. An efficient 2D Finite Element (FE) method is used to calculate the complete scattering response from a single elliptical austenitic grain of arbitrary length and width as a function of the specific inspection frequency. A grain allocation model of the weld is presented to approximate the characteristic structures observed in austenitic welds and the complete scattering behaviour of each grain calculated. This model is incorporated into a semi-analytical framework for a single-element inspection of a typical weld in immersion. Experimental validation evidence is demonstrated indicating excellent qualitative agreement of SNR as a function of frequency and a minimum SNR difference of 2 dB at a centre frequency of 2.25 MHz. Additionally, an example Monte-Carlo study is presented detailing the variation of SNR as a function of the anisotropy distribution of the weld, and the application of confidence analysis to inform inspection development.

  18. Design considerations for an intelligent mobile robot for mixed-waste inspection

    SciTech Connect

    Sias, F.R.; Dawson, D.M.; Schalkoff, R.J.; Byrd, J.S.; Pettus, R.O.

    1993-06-01

    Large quantities of low-level radioactive waste are stored in steel drums at various Department of Energy (DOE) sites in the United States. Much of the stored waste qualifies as mixed waste and falls under Environmental Protection Agency (EPA) regulations that require periodic inspection. A semi-autonomous mobile robot is being developed during Phase 1 of a DOE contract to perform the inspection task and consequently reduce the radiation exposure of inspection personnel to ALARA (as low as reasonably achievable). The nature of the inspection process, the resulting robot design requirements, and the current status of the project are the subjects of this paper.

  19. Aviation security cargo inspection queuing simulation model for material flow and accountability

    SciTech Connect

    Olama, Mohammed M; Allgood, Glenn O; Rose, Terri A; Brumback, Daryl L

    2009-01-01

    Beginning in 2010, the U.S. will require that all cargo loaded in passenger aircraft be inspected. This will require more efficient processing of cargo and will have a significant impact on the inspection protocols and business practices of government agencies and the airlines. In this paper, we develop an aviation security cargo inspection queuing simulation model for material flow and accountability that will allow cargo managers to conduct impact studies of current and proposed business practices as they relate to inspection procedures, material flow, and accountability.

  20. Origins of GEMS Grains

    NASA Technical Reports Server (NTRS)

    Messenger, S.; Walker, R. M.

    2012-01-01

    Interplanetary dust particles (IDPs) collected in the Earth s stratosphere contain high abundances of submicrometer amorphous silicates known as GEMS grains. From their birth as condensates in the outflows of oxygen-rich evolved stars, processing in interstellar space, and incorporation into disks around new stars, amorphous silicates predominate in most astrophysical environments. Amorphous silicates were a major building block of our Solar System and are prominent in infrared spectra of comets. Anhydrous interplanetary dust particles (IDPs) thought to derive from comets contain abundant amorphous silicates known as GEMS (glass with embedded metal and sulfides) grains. GEMS grains have been proposed to be isotopically and chemically homogenized interstellar amorphous silicate dust. We evaluated this hypothesis through coordinated chemical and isotopic analyses of GEMS grains in a suite of IDPs to constrain their origins. GEMS grains show order of magnitude variations in Mg, Fe, Ca, and S abundances. GEMS grains do not match the average element abundances inferred for ISM dust containing on average, too little Mg, Fe, and Ca, and too much S. GEMS grains have complementary compositions to the crystalline components in IDPs suggesting that they formed from the same reservoir. We did not observe any unequivocal microstructural or chemical evidence that GEMS grains experienced prolonged exposure to radiation. We identified four GEMS grains having O isotopic compositions that point to origins in red giant branch or asymptotic giant branch stars and supernovae. Based on their O isotopic compositions, we estimate that 1-6% of GEMS grains are surviving circumstellar grains. The remaining 94-99% of GEMS grains have O isotopic compositions that are indistinguishable from terrestrial materials and carbonaceous chondrites. These isotopically solar GEMS grains either formed in the Solar System or were completely homogenized in the interstellar medium (ISM). However, the

  1. Ultrasonic inspection of austenitic stainless steel welds with artificially produced stress corrosion cracks

    SciTech Connect

    Dugan, Sandra; Wagner, Sabine

    2014-02-18

    Austenitic stainless steel welds and nickel alloy welds, which are widely used in nuclear power plants, present major challenges for ultrasonic inspection due to the grain structure in the weld. Large grains in combination with the elastic anisotropy of the material lead to increased scattering and affect sound wave propagation in the weld. This results in a reduced signal-to-noise ratio, and complicates the interpretation of signals and the localization of defects. Mechanized ultrasonic inspection was applied to study austenitic stainless steel test blocks with different types of flaws, including inter-granular stress corrosion cracks (IGSCC). The results show that cracks located in the heat affected zone of the weld are easily detected when inspection from both sides of the weld is possible. In cases of limited accessibility, when ultrasonic inspection can be carried out only from one side of a weld, it may be difficult to distinguish between signals from scattering in the weld and signals from cracks.

  2. 24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... difficult to remove without defacing it. It shall be etched on .032 in. thick aluminum plate. The label... failure to obtain full acceptance resulted from the fact that the Secretary or the Secretary's agent...

  3. 24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... difficult to remove without defacing it. It shall be etched on .032 in. thick aluminum plate. The label... failure to obtain full acceptance resulted from the fact that the Secretary or the Secretary's agent...

  4. 24 CFR 3282.362 - Production Inspection Primary Inspection Agencies (IPIAs).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... difficult to remove without defacing it. It shall be etched on .032 in. thick aluminum plate. The label... failure to obtain full acceptance resulted from the fact that the Secretary or the Secretary's agent...

  5. 78 FR 3420 - Pesticide Emergency Exemptions; Agency Decisions and State and Federal Agency Crisis Declarations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-16

    ...). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide manufacturing (NAICS... notice of receipt was appropriate since the use is for expansion of an antibiotic, and of potential... Agencies United States Department of Agriculture (USDA) Animal and Plant Health Inspection Service...

  6. Infusion pump inspection frequencies. How often is inspection really needed?

    PubMed

    1998-01-01

    As noted in this issue's Evaluation of infusion pump analyzers, the frequency at which a facility inspects its infusion pumps can help determine its need for one or more analyzers. It can also have a financial impact on the clinical engineering department. In this article, we discuss inspection issues affecting infusion pumps, including our recommendations and how facilities can set intervals for their equipment. (For ECRI's procedure for inspecting infusion devices, refer to Procedure/Checklist 416-0595 in the Health Devices Inspection and Preventive Maintenance [IPM] System; contact ECRI's Communications Department at [610] 825-6000, ext. 888, for more information about this publication.)

  7. Safeguards management inspection procedures

    SciTech Connect

    Barth, M.J.; Dunn, D.R.

    1984-08-01

    The objective of this inspection module is to independently assess the contributions of licensee management to overall safeguards systems performance. The inspector accomplishes this objective by comparing the licensee's safeguards management to both the 10 CFR, parts 70 and 73, requirements and to generally accepted management practices. The vehicle by which this comparison is to be made consists of assessment questions and key issues which point the inspector to areas of primary concern to the NRC and which raise additional issues for the purpose of exposing management ineffectiveness. Further insight into management effectiveness is obtained through those assessment questions specifically directed toward the licensee's safeguards system performance. If the quality of the safeguards is poor, then the inspector should strongly suspect that management's role is ineffective and should attempt to determine management's influence (or lack thereof) on the underlying safeguards deficiencies. (The converse is not necessarily true, however.) The assessment questions in essence provide an opportunity for the inspector to identify, to single out, and to probe further, questionable management practices. Specific issues, circumstances, and concerns which point to questionable or inappropriate practices should be explicitly identified and referenced against the CFR and the assessment questions. The inspection report should also explain why the inspector feels certain management practices are poor, counter to the CFR, and/or point to ineffecive management. Concurrent with documenting the inspection results, the inspector should provide recommendations for alleviating observed management practices that are detrimental to effective safeguards. The recommendations could include: specific changes in the practices of the licensee, followup procedures on the part of NRC, and proposed license changes.

  8. Pellet inspection apparatus

    DOEpatents

    Wilks, Robert S.; Taleff, Alexander; Sturges, Jr., Robert H.

    1982-01-01

    Apparatus for inspecting nuclear fuel pellets in a sealed container for diameter, flaws, length and weight. The apparatus includes, in an array, a pellet pick-up station, four pellet inspection stations and a pellet sorting station. The pellets are delivered one at a time to the pick-up station by a vibrating bowl through a vibrating linear conveyor. Grippers each associated with a successive pair of the stations are reciprocable together to pick up a pellet at the upstream station of each pair and to deposit the pellet at the corresponding downstream station. The gripper jaws are opened selectively depending on the state of the pellets at the stations and the particular cycle in which the apparatus is operating. Inspection for diameter, flaws and length is effected in each case by a laser beam projected on the pellets by a precise optical system while each pellet is rotated by rollers. Each laser and its optical system are mounted in a container which is free standing on a precise surface and is provided with locating buttons which engage locating holes in the surface so that each laser and its optical system is precisely set. The roller stands are likewise free standing and are similarly precisely positioned. The diameter optical system projects a thin beam of light which scans across the top of each pellet and is projected on a diode array. The fl GOVERNMENT CONTRACT CLAUSE The invention herein described was made in the course of or under a contract or subcontract thereunder with the Department of Energy bearing No. EY-67-14-C-2170.

  9. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-06-13

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks.

  10. They're Here! How to Prepare Your Blood Bank for Inspection.

    PubMed

    Byrne, Karen M; Frank, Ernest G; Gedman, Lauren A; Ivey, Julie R

    2015-01-01

    The importance of an inspection ready blood bank cannot be overemphasized. Various agencies perform inspections to ensure that facilities are compliant with federal and state regulations, as well as with standards defined by professional organizations. Inspections may strike fear into the staff members of the organizations being inspected. When a laboratory is in a state of constant readiness, such anxiety is likely to be lessened. Facilities may differ in structure and size and yet be held to the same standards. This article discusses the who, when, and why of laboratory safety inspections. We share helpful information gathered from various resources, including interviews with a quality assurance specialist, a blood bank manager, and an assessor, to help facilities work towards an inspection ready state.

  11. Visual Inspection of Surfaces

    NASA Technical Reports Server (NTRS)

    Hughes, David; Perez, Xavier

    2007-01-01

    This presentation evaluates the parameters that affect visual inspection of cleanliness. Factors tested include surface reflectance, surface roughness, size of the largest particle, exposure time, inspector and distance from sample surface. It is concluded that distance predictions were not great, particularly because the distance at which contamination is seen may depend on more variables than those tested. Most parameters estimates had confidence of 95% or better, except for exposure and reflectance. Additionally, the distance at which surface is visibly contaminated decreases with increasing reflectance, roughness, and exposure. The distance at which the surface is visually contaminated increased with the largest particle size. These variables were only slightly affected the observer.

  12. Ceramic inspection system

    DOEpatents

    Werve, Michael E.

    2006-05-16

    A system for inspecting a ceramic component. The ceramic component is positioned on a first rotary table. The first rotary table rotates the ceramic component. Light is directed toward the first rotary table and the rotating ceramic component. A detector is located on a second rotary table. The second rotary table is operably connected to the first rotary table and the rotating ceramic component. The second rotary table is used to move the detector at an angle to the first rotary table and the rotating ceramic component.

  13. Acoustic inspection device

    DOEpatents

    Diaz, Aaron A.; Burghard, Brion J.; Skorpik, James R.; Pappas, Richard A.; Mullen, O. Dennis; Samuel, Todd J.; Reid, Larry D.; Harris, Joe C.; Valencia, Juan D.; Smalley, Jonathan T.; Shepard, Chester L.; Taylor, Theodore T.

    2005-09-06

    An ultrasound inspection apparatus particularly adapted to examine containers (sealed or unsealed) containing a liquid or solid bulk material. The apparatus has an overall configuration of a hand held pistol with a front transducer contact surface that is positioned against a front wall of the container. An ultrasound pulse is transmitted from the apparatus to be reflected from a back wall of a container being investigated. The received echo pulse is converted to a digital waveform. The waveform is analyzed relative to temperature, travel distance of the pulse(s), and time of travel to ascertain characteristics of the liquid or other materials and to provide identification of the same.

  14. Electrostatic Levitator Inspected

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Larry Savage, Dr. Jan Rogers, Dr. Michael Robinson (All NASA) and Doug Huie (Mevatec) inspect the Electrostatic Levitator (ESL) at NASA's Marshall Space Flight Center (MSFC). The ESL uses static electricity to suspend an object (about 2-3 mm in diameter) inside a vacuum chamber while a laser heats the sample until it melts. This lets scientists record a wide range of physical properties without the sample contacting the container or any instruments, conditions that would alter the readings. The Electrostatic Levitator is one of several tools used in NASA's microgravity materials science program.

  15. 40 CFR 142.34 - Entry and inspection of public water systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... shall notify, in writing, the State agency charged with responsibility for safe drinking water of his... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Entry and inspection of public water systems. 142.34 Section 142.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)...

  16. 40 CFR 142.34 - Entry and inspection of public water systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... shall notify, in writing, the State agency charged with responsibility for safe drinking water of his... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Entry and inspection of public water systems. 142.34 Section 142.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)...

  17. Detection of insects in grain

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Detecting insects hidden inside kernels of grain is important to grain buyers because internal infestations can result in insect fragments in products made from the grain, or, if the grain is stored before use, the insect population can increase and damage the grain further. In a study in the Unite...

  18. An Evaluation of Signal Processing Tools for Improving Phased Array Ultrasonic Weld Inspection

    SciTech Connect

    Ramuhalli, Pradeep; Cinson, Anthony D.; Crawford, Susan L.; Harris, Robert V.; Diaz, Aaron A.; Anderson, Michael T.

    2011-03-24

    Cast austenitic stainless steel (CASS) commonly used in U.S. nuclear power plants is a coarse-grained, elastically anisotropic material. The coarse-grained nature of CASS makes ultrasonic inspection of in-service components difficult. Recently, low-frequency phased array ultrasound has emerged as a candidate for the CASS piping weld inspection. However, issues such as low signal-to-noise ratio and difficulty in discriminating between flaw and non-flaw signals remain. This paper discusses the evaluation of a number of signal processing algorithms for improving flaw detection in CASS materials. The full paper provides details of the algorithms being evaluated, along with preliminary results.

  19. 34 CFR 99.11 - May an educational agency or institution charge a fee for copies of education records?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Education FAMILY EDUCATIONAL RIGHTS AND PRIVACY What Are the Rights of Inspection and Review of Education... right to inspect and review the student's education records, an educational agency or institution may... 34 Education 1 2011-07-01 2011-07-01 false May an educational agency or institution charge a...

  20. Automated Telerobotic Inspection Of Surfaces

    NASA Technical Reports Server (NTRS)

    Balaram, J.; Prasad, K. Venkatesh

    1996-01-01

    Method of automated telerobotic inspection of surfaces undergoing development. Apparatus implementing method includes video camera that scans over surfaces to be inspected, in manner of mine detector. Images of surfaces compared with reference images to detect flaws. Developed for inspecting external structures of Space Station Freedom for damage from micrometeorites and debris from prior artificial satellites. On Earth, applied to inspection for damage, missing parts, contamination, and/or corrosion on interior surfaces of pipes or exterior surfaces of bridges, towers, aircraft, and ships.

  1. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.

    1995-10-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  2. Waste inspection tomography (WIT)

    SciTech Connect

    Bernardi, R.T.; Han, K.S.

    1994-12-31

    The WIT program will provide an inspection system that offers the nuclear waste evaluator a unique combination of tools for regulatory-driven characterization of low-level waste (LLW), transuranic waste (TRU), and mixed waste drums. WIT provides nondestructive, noninvasive, and environmentally safe inspections using X-ray and gamma ray technologies, with reasonable cost and throughput. Two emission imaging techniques will be employed for characterizing materials in waste containers. The first of these is gamma emission tomography, commonly called single-photon emission computed tomography (SPECT). Rather than using an external radiation source, SPECT uses the emission of radioactive materials within the object of interest for imaging. In this case, emission from actual nuclear waste within a container will provide a three-dimensional image of the radioactive substances in the container. The second emission technique will use high-purity germanium detectors for gamma ray spectroscopy. This technique, called nondestructive assay (NDA), can identify the emitting isotopic species and strength. Work in emission tomography and assay of nuclear waste has been undertaken at Lawrence Livermore National Laboratory using a technique called Passive Tomography. Results from a process development unit are presented.

  3. Application of x rays to nonintrusive inspection: an assessment

    NASA Astrophysics Data System (ADS)

    Leach, Eugene R.; Spradling, Michael L.

    1995-05-01

    Two Advanced Research Projects Agency (ARPA) sponsored x-ray nonintrusive inspection system test programs have recently been conducted. A high energy x-ray system designed to inspect air-sea-land intermodal cargo containers and their contents was tested at the Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington and a low energy x-ray system designed primarily to examine empty tractor trailer vehicles was tested at the Commercial Inspection Border Crossing Facility at Otay Mesa, California. Both test programs involved the use of a Red/Blue/Silver Team test concept and were conducted in accordance with test protocols. The 'Red Team' which represented the 'smugglers' has the responsibility for preparing cargoes/vehicles for inspection at a location off-site from the inspection facilities. A computer-based algorithm originally developed under contract with ARPA for testing at the NITT was used to randomly select the preparation of the cargoes. The control vehicles were subsequently sent to the test site for x-ray interrogation and analysis. The 'Blue Team' which represented US Customs Service operations analyzed the x- ray images and made recommendation for release/inspection of the control vehicles. The results of the analyses were returned to the Red Team location for evaluation and data compilation by an unbiased observation team. This paper presents discussions related to these x-ray systems' tests including transport techniques, the use of backscatter and transmission imaging for cargo inspection, resolution, analytical tools, and other related considerations for these two systems.

  4. Convection in grain refining

    NASA Technical Reports Server (NTRS)

    Flemings, M. C.; Szekely, J.

    1982-01-01

    The relationship between fluid flow phenomena, nucleation, and grain refinement in solidifying metals both in the presence and in the absence of a gravitational field was investigated. The reduction of grain size in hard-to-process melts; the effects of undercooling on structure in solidification processes, including rapid solidification processing; and control of this undercooling to improve structures of solidified melts are considered. Grain refining and supercooling thermal modeling of the solidification process, and heat and fluid flow phenomena in the levitated metal droplets are described.

  5. All About the Grains Group

    MedlinePlus

    ... the Grains Group? Any food made from wheat, rice, oats, cornmeal, barley or another cereal grain is ... bulgur (cracked wheat), oatmeal, whole cornmeal, and brown rice. Refined grains have been milled, a process that ...

  6. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Visual inspections. 213.365 Section 213.365... Visual inspections. (a) All track shall be visually inspected in accordance with the schedule prescribed..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle...

  7. 7 CFR 29.39 - Permissive inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Permissive inspection. 29.39 Section 29.39 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.39 Permissive inspection. Inspection authorized under section 6...

  8. 49 CFR 396.17 - Periodic inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... MAINTENANCE § 396.17 Periodic inspection. (a) Every commercial motor vehicle must be inspected as required by... least once during the preceding 12 months and documentation of such inspection is on the vehicle. The... annual inspection for vehicles under the carrier's control which are not subject to an inspection...

  9. 49 CFR 213.233 - Track inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... a vehicle at a speed that allows the person making the inspection to visually inspect the track... may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of..., otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on...

  10. 49 CFR 213.233 - Track inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... a vehicle at a speed that allows the person making the inspection to visually inspect the track... may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of..., otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on...

  11. 49 CFR 213.233 - Track inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... a vehicle at a speed that allows the person making the inspection to visually inspect the track... may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of..., otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on...

  12. 49 CFR 396.17 - Periodic inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... MAINTENANCE § 396.17 Periodic inspection. (a) Every commercial motor vehicle must be inspected as required by... least once during the preceding 12 months and documentation of such inspection is on the vehicle. The... annual inspection for vehicles under the carrier's control which are not subject to an inspection...

  13. 49 CFR 396.17 - Periodic inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MAINTENANCE § 396.17 Periodic inspection. (a) Every commercial motor vehicle must be inspected as required by... least once during the preceding 12 months and documentation of such inspection is on the vehicle. The... annual inspection for vehicles under the carrier's control which are not subject to an inspection...

  14. 49 CFR 396.17 - Periodic inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... MAINTENANCE § 396.17 Periodic inspection. (a) Every commercial motor vehicle must be inspected as required by... least once during the preceding 12 months and documentation of such inspection is on the vehicle. The... annual inspection for vehicles under the carrier's control which are not subject to an inspection...

  15. 49 CFR 213.233 - Track inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a vehicle at a speed that allows the person making the inspection to visually inspect the track... may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of..., otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on...

  16. 49 CFR 213.233 - Track inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... a vehicle at a speed that allows the person making the inspection to visually inspect the track... may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of..., otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on...

  17. 46 CFR 176.800 - Inspection standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Material Inspections § 176.800 Inspection standards. (a) A vessel is inspected... acceptable to the cognizant OCMI as good marine practice. (b) In the application of inspection standards...

  18. 46 CFR 176.800 - Inspection standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Material Inspections § 176.800 Inspection standards. (a) A vessel is inspected... acceptable to the cognizant OCMI as good marine practice. (b) In the application of inspection standards...

  19. 46 CFR 176.800 - Inspection standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Material Inspections § 176.800 Inspection standards. (a) A vessel is inspected... acceptable to the cognizant OCMI as good marine practice. (b) In the application of inspection standards...

  20. 46 CFR 176.800 - Inspection standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Material Inspections § 176.800 Inspection standards. (a) A vessel is inspected... acceptable to the cognizant OCMI as good marine practice. (b) In the application of inspection standards...

  1. Non-Destructive Evaluation of Grain Structure Using Air-Coupled Ultrasonics

    SciTech Connect

    Belvin, A. D.; Burrell, R. K.; Cole, E.G.

    2009-08-01

    Cast material has a grain structure that is relatively non-uniform. There is a desire to evaluate the grain structure of this material non-destructively. Traditionally, grain size measurement is a destructive process involving the sectioning and metallographic imaging of the material. Generally, this is performed on a representative sample on a periodic basis. Sampling is inefficient and costly. Furthermore, the resulting data may not provide an accurate description of the entire part's average grain size or grain size variation. This project is designed to develop a non-destructive acoustic scanning technique, using Chirp waveforms, to quantify average grain size and grain size variation across the surface of a cast material. A Chirp is a signal in which the frequency increases or decreases over time (frequency modulation). As a Chirp passes through a material, the material's grains reduce the signal (attenuation) by absorbing the signal energy. Geophysics research has shown a direct correlation with Chirp wave attenuation and mean grain size in geological structures. The goal of this project is to demonstrate that Chirp waveform attenuation can be used to measure grain size and grain variation in cast metals (uranium and other materials of interest). An off-axis ultrasonic inspection technique using air-coupled ultrasonics has been developed to determine grain size in cast materials. The technique gives a uniform response across the volume of the component. This technique has been demonstrated to provide generalized trends of grain variation over the samples investigated.

  2. Whole Grains and Fiber

    MedlinePlus

    ... Oct 11,2016 Any food made from wheat, rice, oats, corn, or another cereal is a grain ... wheat, oats/oatmeal, rye, barley, corn, popcorn, brown rice, wild rice, buckwheat, triticale, bulgur (cracked wheat), millet, ...

  3. Laser Safety Inspection Criteria

    SciTech Connect

    Barat, K

    2005-02-11

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  4. Report: American Recovery and Reinvestment Act Site Inspection of Sewer Pump Station Rehabilitation and Improvements, Town of Ball, Louisiana

    EPA Pesticide Factsheets

    Report #11-R-0014, November 9, 2010. Based upon our site inspection, nothing came to our attention that would require action from the town, the State of Louisiana, or the U.S. Environmental Protection Agency.

  5. 78 FR 52127 - Tobacco Inspection and Grading Services: Notice of Request for an Extension of a Currently...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-22

    ... Agricultural Marketing Service Tobacco Inspection and Grading Services: Notice of Request for an Extension of a Currently Approved Information Collection AGENCY: Agricultural Marketing Service, USDA. ACTION: Notice and... 35), this notice announces the Agricultural Marketing Service's (AMS) intention to request...

  6. Report: American Recovery and Reinvestment Act Site Inspection of Sewer System Improvement Projects, City of Parma, Ohio

    EPA Pesticide Factsheets

    Report #11-R-0083, February 2, 2011. Based upon our site inspection, no problems were identified that would require action from the city, the State of Ohio, or the U.S. Environmental Protection Agency.

  7. Pipe inspection and repair system

    NASA Technical Reports Server (NTRS)

    Schempf, Hagen (Inventor); Mutschler, Edward (Inventor); Chemel, Brian (Inventor); Boehmke, Scott (Inventor); Crowley, William (Inventor)

    2004-01-01

    A multi-module pipe inspection and repair device. The device includes a base module, a camera module, a sensor module, an MFL module, a brush module, a patch set/test module, and a marker module. Each of the modules may be interconnected to construct one of an inspection device, a preparation device, a marking device, and a repair device.

  8. 75 FR 56914 - Removal of the List of Ports of Embarkation and Export Inspection Facilities from the Regulations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... arrangements, testing and treatment of animals, facility location, disposal of animal wastes, lighting, office... Animal and Plant Health Inspection Service 9 CFR Part 91 RIN 0579-AD25 Removal of the List of Ports of Embarkation and Export Inspection Facilities from the Regulations AGENCY: Animal and Plant Health...

  9. 40 CFR 60.2716 - By what date must I conduct the annual air pollution control device inspection?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... air pollution control device inspection? 60.2716 Section 60.2716 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY... annual air pollution control device inspection), you must complete the air pollution control...

  10. 40 CFR 60.2716 - By what date must I conduct the annual air pollution control device inspection?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... air pollution control device inspection? 60.2716 Section 60.2716 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY... annual air pollution control device inspection), you must complete the air pollution control...

  11. 40 CFR 60.2716 - By what date must I conduct the annual air pollution control device inspection?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... air pollution control device inspection? 60.2716 Section 60.2716 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY... annual air pollution control device inspection), you must complete the air pollution control...

  12. 76 FR 11191 - Hazardous Materials: Adoption of ASME Code Section XII and the National Board Inspection Code

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-01

    ... Hazardous Materials: Adoption of ASME Code Section XII and the National Board Inspection Code AGENCY... Pressure Vessel Code, Section XII (2010 Edition) and the National Board of Boiler and Pressure Vessel Inspectors' National Board Inspection Code (2007 Edition). Further, PHMSA is extending the comment period...

  13. 78 FR 79363 - Hazardous Materials: Adoption of ASME Code Section XII and the National Board Inspection Code

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-30

    ... Hazardous Materials: Adoption of ASME Code Section XII and the National Board Inspection Code AGENCY... Code, Section XII (Section XII) for the design, construction, and certification of cargo tank motor... edition of the National Board of Boiler and Pressure Vessel Inspectors' National Board Inspection...

  14. 9 CFR 331.4 - Control and disposal of non-federally-inspected products in States designated under paragraph 301...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Control and disposal of non-federally-inspected products in States designated under paragraph 301(c) of the Act. 331.4 Section 331.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  15. 9 CFR 331.4 - Control and disposal of non-federally-inspected products in States designated under paragraph 301...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Control and disposal of non-federally-inspected products in States designated under paragraph 301(c) of the Act. 331.4 Section 331.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  16. 9 CFR 331.4 - Control and disposal of non-federally-inspected products in States designated under paragraph 301...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Control and disposal of non-federally-inspected products in States designated under paragraph 301(c) of the Act. 331.4 Section 331.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  17. 9 CFR 331.4 - Control and disposal of non-federally-inspected products in States designated under paragraph 301...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Control and disposal of non-federally-inspected products in States designated under paragraph 301(c) of the Act. 331.4 Section 331.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  18. 9 CFR 331.4 - Control and disposal of non-federally-inspected products in States designated under paragraph 301...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Control and disposal of non-federally-inspected products in States designated under paragraph 301(c) of the Act. 331.4 Section 331.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION...

  19. 9 CFR 327.15 - Outside containers of foreign products; marking and labeling; application of official inspection...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to the United States shall bear, in English, in a prominent and legible manner: (1) The name or... Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY... country of origin; and (3) The establishment number assigned by the foreign meat inspection system...

  20. Inspection system calibration methods

    DOEpatents

    Deason, Vance A.; Telschow, Kenneth L.

    2004-12-28

    An inspection system calibration method includes producing two sideband signals of a first wavefront; interfering the two sideband signals in a photorefractive material, producing an output signal therefrom having a frequency and a magnitude; and producing a phase modulated operational signal having a frequency different from the output signal frequency, a magnitude, and a phase modulation amplitude. The method includes determining a ratio of the operational signal magnitude to the output signal magnitude, determining a ratio of a 1st order Bessel function of the operational signal phase modulation amplitude to a 0th order Bessel function of the operational signal phase modulation amplitude, and comparing the magnitude ratio to the Bessel function ratio.

  1. TPS Inspection and Repair

    NASA Technical Reports Server (NTRS)

    Parazynski, Scott

    2012-01-01

    Dr. Scott Parazynski provided a retrospective on the EVA tools and procedures efforts NASA went through in the aftermath of Columbia for the Shuttle Thermal Protection System (TPS) inspection and repair. He describes his role as the lead astronaut on this effort, and covered all of the Neutral Buoyancy Lab (NBL), KC 135 (reduced gravity aircraft), Precision Air Bearing Floor (PABF), vacuum chamber and 1 G testing that was done in order to develop the tools and techniques that were flown. Parazynski also discusses how the EVA community worked together to resolve a huge safety issue, and how his work in the spacesuit was critical to overcoming a design limitation of the Space Shuttle.

  2. Automated fabric inspection system

    NASA Astrophysics Data System (ADS)

    Jarvis, Christine W.

    1993-10-01

    The Automatic Fabric Inspection System developed by Systronics Inc. for Clemson Apparel Research uses vision technology to acquire images of the fabric two thousand times per second. Each image-video line consisting of 2048 picture elements is analyzed by a signal processing module and a decision on defect presence and location is made. A product norm signal is first established by having the system acquire an image of an unflawed stripe of the product. The output of each picture element (pixel) is digitized to a grey scale value in the 0-255 range. Threshold levels for defects with grey scale values higher and lower than product norm can then be established and set. The system will then compare all subsequent images against the set thresholds.

  3. Thermographic inspection of massive structures

    SciTech Connect

    Renshaw, Jeremy B.; Guimaraes, Maria; Scott, David B.

    2014-02-18

    Nondestructive Evaluation of concrete structures is a growing concern for the nuclear industry as well as for many other industries. As critical concrete components continue to age, the ability to assess the health and suitability for continued service has become a key consideration. In some cases, repair of these structures is difficult and expensive, while replacement is prohibitively expensive or, in some cases, not feasible. Therefore, the ability to inspect these key assets is a primary concern, especially in the nuclear industry. Due to the large size of containment buildings, cooling towers, and other large concrete assets, the ability to rapidly inspect for defects of concern is very desirable. Thermographic inspection appears to have the required ability to rapidly inspect large structures to ascertain the location and size of many of the defects of concern. This ability was demonstrated by performing a thermographic inspection of a large concrete dam in 2 days.

  4. Ultrasonic inspection and deployment apparatus

    DOEpatents

    Michaels, Jennifer E.; Michaels, Thomas E.; Mech, Jr., Stephen J.

    1984-01-01

    An ultrasonic inspection apparatus for the inspection of metal structures, especially installed pipes. The apparatus combines a specimen inspection element, an acoustical velocity sensing element, and a surface profiling element, all in one scanning head. A scanning head bellows contains a volume of oil above the pipe surface, serving as acoustical couplant between the scanning head and the pipe. The scanning head is mounted on a scanning truck which is mobile around a circular track surrounding the pipe. The scanning truck has sufficient motors, gears, and position encoders to allow the scanning head six degrees of motion freedom. A computer system continually monitors acoustical velocity, and uses that parameter to process surface profiling and inspection data. The profiling data is used to automatically control scanning head position and alignment and to define a coordinate system used to identify and interpret inspection data. The apparatus is suitable for highly automated, remote application in hostile environments, particularly high temperature and radiation areas.

  5. Device for inspecting vessel surfaces

    DOEpatents

    Appel, D. Keith

    1995-01-01

    A portable, remotely-controlled inspection crawler for use along the walls of tanks, vessels, piping and the like. The crawler can be configured to use a vacuum chamber for supporting itself on the inspected surface by suction or a plurality of magnetic wheels for moving the crawler along the inspected surface. The crawler is adapted to be equipped with an ultrasonic probe for mapping the structural integrity or other characteristics of the surface being inspected. Navigation of the crawler is achieved by triangulation techniques between a signal transmitter on the crawler and a pair of microphones attached to a fixed, remote location, such as the crawler's deployment unit. The necessary communications are established between the crawler and computers external to the inspection environment for position control and storage and/or monitoring of data acquisition.

  6. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  7. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  8. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  9. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  10. 7 CFR 996.8 - Incoming inspection.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Definitions § 996.8 Incoming inspection. Incoming inspection means the sampling, inspection, and certification of farmers stock peanuts...

  11. 9 CFR 354.10 - Inspection service.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Basis of Service § 354.10...

  12. Film grain synthesis and its application to re-graining

    NASA Astrophysics Data System (ADS)

    Schallauer, Peter; Mörzinger, Roland

    2006-01-01

    Digital film restoration and special effects compositing require more and more automatic procedures for movie regraining. Missing or inhomogeneous grain decreases perceived quality. For the purpose of grain synthesis an existing texture synthesis algorithm has been evaluated and optimized. We show that this algorithm can produce synthetic grain which is perceptually similar to a given grain template, which has high spatial and temporal variation and which can be applied to multi-spectral images. Furthermore a re-grain application framework is proposed, which synthesises based on an input grain template artificial grain and composites this together with the original image content. Due to its modular approach this framework supports manual as well as automatic re-graining applications. Two example applications are presented, one for re-graining an entire movie and one for fully automatic re-graining of image regions produced by restoration algorithms. Low computational cost of the proposed algorithms allows application in industrial grade software.

  13. Fingering phenomena during grain-grain displacement

    NASA Astrophysics Data System (ADS)

    Mello, Nathália M. P.; Paiva, Humberto A.; Combe, G.; Atman, A. P. F.

    2017-04-01

    Spontaneous formation of fingered patterns during the displacement of dense granular assemblies was experimentally reported few years ago, in a radial Hele-Shaw cell. Here, by means of discrete element simulations, we have recovered the experimental findings and extended the original study to explore the control parameters space. In particular, using assemblies of grains with different geometries (monodisperse, bidisperse, or polydisperse), we measured the macroscopic stress tensor in the samples in order to confirm some conjectures proposed in analogy with Saffman-Taylor viscous fingering phenomena for immiscible fluids. Considering an axial setup which allows to control the discharge of grains and to follow the trajectory and the pressure gradient along the displacing interface, we have applied the Darcy law for laminar flow in fluids in order to measure an "effective viscosity" for each assembly combination, in an attempt to mimic variation of the viscosity ratio between the injected/displaced fluids in the Saffman-Taylor experiment. The results corroborate the analogy with the viscous fluids displacement, with the bidisperse assembly corresponding to the less viscous geometry. But, differently to fluid case, granular fingers only develop for a specific combination of displaced/injected geometries, and we have demonstrated that it is always related with the formation of a force chain network along the finger direction.

  14. 49 CFR 230.13 - Daily inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS General General Inspection... glasses and gauge cocks; (2) Boiler feedwater delivery systems, such as injectors and feedwater pumps;...

  15. 49 CFR 230.13 - Daily inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS General General Inspection... glasses and gauge cocks; (2) Boiler feedwater delivery systems, such as injectors and feedwater pumps;...

  16. Grain fever syndrome induced by inhalation of airborne grain dust.

    PubMed

    doPico, G A; Flaherty, D; Bhansali, P; Chavaje, N

    1982-05-01

    To study the clinical and physiologic manifestations of the grain fever syndrome and the potentially pathogenic role of complement activation, 12 subjects (six grain workers and six healthy non-grain workers) underwent inhalation provocations with airborne grain dust. The clinical response was characterized by facial warmth, headache, malaise, myalgias, feverish sensation, chilliness, throat and tracheal burning sensation, chest tightness, dyspnea, cough, and expectoration. Fever developed in four grain workers and two controls. Leukocytosis, ranging between 11,700 and 24,300 leukocytes/mm3 with left shift, developed in five grain workers and five controls. There was no evidence of complement activation by the classical or alternate pathway. None of the subjects had serum precipitins to grain dust. The pulmonary response was characterized by a decrease in FEV1, FVC, MMF, Vmax50, and Vmax75, with significant rise in pulmonary resistance and consistent change in dynamic compliance but without changes in static compliance or diffusing capacity. Hence, grain dust inhalation induced diffuse airways obstruction without detectable parenchymal reaction. The airways response to high concentrations of grain dust inhalation were unrelated to the presence of immediate skin hypersensitivity. Although we cannot exclude the etiopathogenetic role of an immunologic reaction to grain dust, our data do not support the hypothesis that the grain fever syndrome is a precipitin-mediated allergic pneumonitis. More likely, the manifestations of grain fever probably reflect the host reaction to grain dust bacterial endotoxins and/or nonallergic mediator release by grain or grain dust constituents.

  17. Visual inspection for CTBT verification

    SciTech Connect

    Hawkins, W.; Wohletz, K.

    1997-03-01

    On-site visual inspection will play an essential role in future Comprehensive Test Ban Treaty (CTBT) verification. Although seismic and remote sensing techniques are the best understood and most developed methods for detection of evasive testing of nuclear weapons, visual inspection can greatly augment the certainty and detail of understanding provided by these more traditional methods. Not only can visual inspection offer ``ground truth`` in cases of suspected nuclear testing, but it also can provide accurate source location and testing media properties necessary for detailed analysis of seismic records. For testing in violation of the CTBT, an offending party may attempt to conceal the test, which most likely will be achieved by underground burial. While such concealment may not prevent seismic detection, evidence of test deployment, location, and yield can be disguised. In this light, if a suspicious event is detected by seismic or other remote methods, visual inspection of the event area is necessary to document any evidence that might support a claim of nuclear testing and provide data needed to further interpret seismic records and guide further investigations. However, the methods for visual inspection are not widely known nor appreciated, and experience is presently limited. Visual inspection can be achieved by simple, non-intrusive means, primarily geological in nature, and it is the purpose of this report to describe the considerations, procedures, and equipment required to field such an inspection.

  18. Fully Employing Software Inspections Data

    NASA Technical Reports Server (NTRS)

    Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

    2009-01-01

    Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

  19. MACS as a tool for international inspections

    SciTech Connect

    Curtiss, J.A.; Indusi, J.P.

    1995-06-01

    General acceptance of the challenge provision in the Chemical Weapons Convention has the potential for influence in other arms control areas. While most applications of the challenge inspection may be straightforward, there may be instances where access to the site by inspectors may be problematic. The MACS system described in this paper was developed to respond to these situations. Inspection and verification may be difficult when a host is unwilling,for valid reasons, to permit physical access to a site. We proposed a system of remote sensors which may be used to demonstrate compliance with Chemical Weapons Convention (CWC) challenge inspections even ff the inspector is physically excluded from a sensitive site. The system is based upon alternative-means-of-access provisions of the CWC. The Defense Nuclear Agency (DNA) funded design and construction of a system prototype, designated as MACS for Managed Access by Controlled Sensing. Features of the MACS design allow growth of the prototype into a versatile device for international monitoring of production facilities and other sites. MACS consists of instrumentation and communication equipment allowing site personnel to conduct a facility tour and perform acceptable measurements, while physically excluding the inspector from the facility. MACS consists of a base station used by the inspector, and a mobile unit used within the facility and manipulated by the facility staff. The base station and the mobile unit are @ed by a communication system, currently realized as a fiber optic cable. The mobile unit is equipped with television cameras and remote-reading distance-measuring equipment (DME) for use in verifying locations and dimensions. Global Positioning System receivers on the mobile unit provide both precise location and dead reckoning, suitable for tracking the mobile unit`s position while within a building when satellite signals are not available.

  20. Composite circumstellar dust grains

    NASA Astrophysics Data System (ADS)

    Gupta, Ranjan; Vaidya, Dipak B.; Dutta, Rajeshwari

    2016-10-01

    We calculate the absorption efficiencies of composite silicate grains with inclusions of graphite and silicon carbide in the spectral range 5-25 μm. We study the variation in absorption profiles with volume fractions of inclusions. In particular we study the variation in the wavelength of peak absorption at 10 and 18 μm. We also study the variation of the absorption of porous silicate grains. We use the absorption efficiencies to calculate the infrared flux at various dust temperatures and compare with the observed infrared emission flux from the circumstellar dust around some M-type and asymptotic giant branch stars obtained from IRAS and a few stars from Spitzer satellite. We interpret the observed data in terms of the circumstellar dust grain sizes, shape, composition and dust temperature.

  1. Shuttle inspection team recognized for 'eagle eyes.'

    NASA Technical Reports Server (NTRS)

    2000-01-01

    NASA Administrator Daniel Goldin (left) applauds the Space Shuttle ice and debris inspection team who were recognized for their keen safety observations prior to the launch of Space Shuttle Discovery. Standing next to Goldin are (left to right) D. Scott Otto, with Lockheed Martin Space Services Company; John B. Blue, Thomas F. Ford and Michael Barber, with United Space Alliance; Gregory N. Katnik and Jorge E. Rivera, with NASA. Katnick and Rivera received the agency's Exceptional Achievement Medal; Barber, Blue, Ford and Otto received the NASA Public Service Medal. While scanning the launch pad before launch, the team found a stray 4-inch pin near the Shuttle's external fuel tank that could have caused damage during launch. Discovery was safely launched the next day, on Oct. 11.

  2. Evaluation of Microencapsulated Penetrant Inspection.

    DTIC Science & Technology

    1980-12-01

    AD-A9b 826 GENERAL ELECTRIC CO CINCINNATI OH AIRCRAFT ENGINE GROUP F/6 IA/2ADG EVALUATION OF MICROENCAPSULATED PENETRANT INSPECTION.(U) DEC 80 J M...4156 ADA096826 EVALUATION OF MICROENCAPSULATED PENETRANT INSPECTION i :I J.M. Portaz Aircraft Engine Group General Electric Company Cincinnati, Ohio... Microencapsulated Penetrant 5 7riJF-Iehica17 = Inspection p un May@84 -1 ---- --- ---- 19AMFGK657j7 7. AiJTHOR(s) nVCWRACT OR GRANT m 𔃻 " JO J.M./Portaz

  3. Procedures for precap visual inspection

    NASA Technical Reports Server (NTRS)

    1984-01-01

    Screening procedures for the final precap visual inspection of microcircuits used in electronic system components are described as an aid in training personnel unfamiliar with microcircuits. Processing techniques used in industry for the manufacture of monolithic and hybrid components are presented and imperfections that may be encountered during this inspection are discussed. Problem areas such as scratches, voids, adhesions, and wire bonding are illustrated by photomicrographs. This guide can serve as an effective tool in training personnel to perform precap visual inspections efficiently and reliably.

  4. F Reactor Inspection

    SciTech Connect

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2014-10-29

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  5. F Reactor Inspection

    ScienceCinema

    Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

    2016-07-12

    Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

  6. Grain optical properties

    NASA Technical Reports Server (NTRS)

    Hanner, Martha

    1988-01-01

    The optical properties of small grains provide the link between the infrared observations presented in Chapter 1 and the dust composition described in Chapter 3. In this session, the optical properties were discussed from the viewpoint of modeling the emission from the dust coma and the scattering in order to draw inference about the dust size distribution and composition. The optical properties are applied to the analysis of the infrared data in several ways, and these different uses should be kept in mind when judging the validity of the methods for applying optical constants to real grains.

  7. Charging of interplanetary grains

    NASA Technical Reports Server (NTRS)

    Baragiola, R. A.; Johnson, R. E.; Newcomb, John L.

    1995-01-01

    The objective of this program is to quantify, by laboratory experiments, the charging of ices and other insulators subject to irradiation with electrons, ions and ultraviolet photons and to model special conditions based on the data. The system and conditions to be studied are those relevant for charging of dust in magnetospheric plasmas. The measurements are supplemented by computer simulations of charging or grains under a variety of conditions. Our work for this period involved experiments on water ice, improved models of charging of ice grains for Saturn's E-ring, and the construction of apparatus for electron impact studies and measurements of electron energy distributions.

  8. MODELING AND PERFORMANCE EVALUATION FOR AVIATION SECURITY CARGO INSPECTION QUEUING SYSTEM

    SciTech Connect

    Allgood, Glenn O; Olama, Mohammed M; Rose, Terri A; Brumback, Daryl L

    2009-01-01

    Beginning in 2010, the U.S. will require that all cargo loaded in passenger aircraft be inspected. This will require more efficient processing of cargo and will have a significant impact on the inspection protocols and business practices of government agencies and the airlines. In this paper, we conduct performance evaluation study for an aviation security cargo inspection queuing system for material flow and accountability. The overall performance of the aviation security cargo inspection system is computed, analyzed, and optimized for the different system dynamics. Various performance measures are considered such as system capacity, residual capacity, and throughput. These metrics are performance indicators of the system s ability to service current needs and response capacity to additional requests. The increased physical understanding resulting from execution of the queuing model utilizing these vetted performance measures will reduce the overall cost and shipping delays associated with the new inspection requirements.

  9. PAUT inspection of copper canister: Structural attenuation and POD formulation

    NASA Astrophysics Data System (ADS)

    Gianneo, A.; Carboni, M.; Mueller, C.; Ronneteg, U.

    2016-02-01

    For inspection of thick-walled (50mm) copper canisters for final disposal of spent nuclear fuel in Sweden, ultrasonic inspection using phased array technique (PAUT) is applied. Because thick-walled copper is not commonly used as a structural material, previous experience on Phased Array Ultrasonic Testing for this type of application is limited. The paper presents the progress in understanding the amplitudes and attenuation changes acting on the Phased Array Ultrasonic Testing inspection of copper canisters. Previous studies showed the existence of a low pass filtering effect and a heterogeneous grain size distribution along the depth, thus affecting both the detectability of defects and their "Probability of Detection" determination. Consequently, the difference between the first and second back wall echoes were not sufficient to determine the local attenuation (within the inspection range), which affects the signal response for each individual defect. Experimental evaluation of structural attenuation was carried out onto step-wedge samples cut from full-size, extruded and pierced & drawn, copper canisters. Effective attenuation values has been implemented in numerical simulations to achieve a Multi Parameter Probability of Detection and to formulate a Model Assisted Probability of Detection through a Monte-Carlo extraction model.

  10. Ultrasonic Inspection Of Thick Sections

    NASA Technical Reports Server (NTRS)

    Friant, C. L.; Djordjevic, B. B.; O'Keefe, C. V.; Ferrell, W.; Klutz, T.

    1993-01-01

    Ultrasonics used to inspect large, relatively thick vessels for hidden defects. Report based on experiments in through-the-thickness transmission of ultrasonic waves in both steel and filament-wound composite cases of solid-fuel rocket motors.

  11. Underwater welding, cutting and inspection

    SciTech Connect

    Tsai, C.L. . Ohio Underwater Welding Center)

    1995-02-01

    Underwater welding, cutting and inspection of offshore, inland waterway and port facilities are becoming a requirement for both military and industrial communities, as maintenance and repair costs continue to escalate, and as many of the facilities are in operation well beyond their intended design life. In nuclear applications, underwater welding, cutting and inspection for repair and modification of irradiated nuclear power plant components are also a requirement. This article summarizes recent developments in this emerging underwater technology.

  12. Surface inspection: Research and development

    NASA Technical Reports Server (NTRS)

    Batchelder, J. S.

    1987-01-01

    Surface inspection techniques are used for process learning, quality verification, and postmortem analysis in manufacturing for a spectrum of disciplines. First, trends in surface analysis are summarized for integrated circuits, high density interconnection boards, and magnetic disks, emphasizing on-line applications as opposed to off-line or development techniques. Then, a closer look is taken at microcontamination detection from both a patterned defect and a particulate inspection point of view.

  13. Edible grain legumes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Edible grain legumes including dry bean, dry pea, chickpeas, and lentils, have served as important sources of protein for human diets for thousands of years. In the US, these crops are predominately produced for export markets. The objective of this study was to examine yield gains in these crops ov...

  14. Interstellar Grain Mantles

    NASA Technical Reports Server (NTRS)

    Witteborn, F.; Goebel, J.; Bregman, J.; Allamandola, Louis J.; Dhendecourt, L. B.; Tielens, Alexander G. G. M.

    1984-01-01

    Techniques for determining the composition of small dust grains in interstellar matter are discussed. The best way to study the composition of interstellar grain mantles is by infrared spectroscopy. The absorption features in a complete infrared spectrum from 2 to 15 microns can be used as fingerprints to identify the absorbing molecule. Ground-based observations around 3 microns confirmed the presence of H2O ice in interstellar grain mantles, through the detection of the 3.08 micron OH stretching vibration. The detection of other molecules, in particular the carbon bearing molecules, is however hampered by atmospheric absorption in the 5-8 micron region and the presence of the strong ice and silicate bands, which dominate the 3 and 10 micron region respectively. Kuiper Airborne Observatory observations of the 5-8 micron region of the spectrum are therefore extremely important to determine the composition of interstellar grain mantles. The 5 to 8 micron spectra of molecular cloud sources was obtained using a 24 detector grating spectrometer. An important characteristic of this spectrometer is that the whole spectrum is obtained simultaneously. It is therefore relatively easy to correct for atmospheric transmission.

  15. Interstellar Grain Surface Chemistry

    NASA Technical Reports Server (NTRS)

    Tielens, Alexander G. G. M.; Cuzzi, Jeffrey N. (Technical Monitor)

    1995-01-01

    Chemistry on grain surfaces plays an Important role in the formation of interstellar Ices, It can also influence the composition of the gas phase through outgassing near luminous, newly formed stars. This paper reviews the chemical processes taking place on Interstellar grain surfaces with the emphasis on those transforming CO into other hydrocarbons. At low, molecular cloud temperatures (approximately equal to 10K), physisorption processes dominate interstellar grain surface chemistry and GO is largely hydrogenated through reactions with atomic H and oxidized through reactions with atomic O. The former will lead to the formation of H2CO and CH3OH ices, while the latter results in CO2 ice. The observational evidence for these ices in molecular clouds will be discussed. Very close to protostars, the gas and grain temperatures are much higher (approximately equal to 500K) and chemisorption processes, including catalytic surface reactions, becomes important. This will be illustrated based upon our studies of the Fischer-Tropsch Synthesis of CH4 from CO on metallic surfaces. Likely, this process has played an important role in the early solar nebula. Observational consequences will be pointed out.

  16. Gravity Probe B Inspection

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The space vehicle Gravity Probe B (GP-B) is the relativity experiment developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. In this photograph, engineer Gary Reynolds is inspecting the inside of the probe neck during probe thermal repairs. GP-B is scheduled for launch in April 2004 and managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University along with major subcontractor Lockheed Martin Corporation. (Image credit to Russ Leese, Gravity Probe B, Stanford University)

  17. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  18. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  19. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  20. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  1. 10 CFR 60.75 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 60.75 Section 60.75 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Records, Reports, Tests, and Inspections § 60.75 Inspections. (a) DOE shall allow the Commission to inspect the...

  2. Proceedings: EPRI Second Phased Array Inspection Seminar

    SciTech Connect

    2001-11-01

    The Second EPRI Phased Array Inspection Seminar focused on industrial applications of phased array technology that have been achieved to date or are planned for the near future. Presentations were made by developers of inspection techniques, inspection services vendors, and utility personnel who have performed inspections using arrays.

  3. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  4. 7 CFR 353.6 - Inspection.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 5 2011-01-01 2011-01-01 false Inspection. 353.6 Section 353.6 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORT CERTIFICATION § 353.6 Inspection. Inspections shall be performed by...

  5. 46 CFR 169.226 - Periodic inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... periodic inspection within 3 months before or after the second or third anniversary of the date of your vessel's Certificate of Inspection. This periodic inspection will take the place of an annual inspection... a time and place which he or she approves. No written application is required. (c) The scope of...

  6. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  7. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  8. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  9. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  10. 10 CFR 76.121 - Inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Inspections. 76.121 Section 76.121 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Reports and Inspections § 76.121 Inspections. (a) The Corporation shall afford to the Commission opportunity to inspect the premises and...

  11. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine inspections. (1) Inspect each bridge at regular intervals not to exceed twenty-four months. (2)...

  12. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine inspections. (1) Inspect each bridge at regular intervals not to exceed twenty-four months. (2)...

  13. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine inspections. (1) Inspect each bridge at regular intervals not to exceed twenty-four months. (2)...

  14. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine inspections. (1) Inspect each bridge at regular intervals not to exceed twenty-four months. (2)...

  15. 23 CFR 650.311 - Inspection frequency.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine inspections. (1) Inspect each bridge at regular intervals not to exceed twenty-four months. (2)...

  16. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Special inspections. 237.105 Section 237.105..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a... inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  17. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Special inspections. 237.105 Section 237.105..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a... inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  18. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Special inspections. 237.105 Section 237.105..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a... inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  19. 49 CFR 237.105 - Special inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Special inspections. 237.105 Section 237.105..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.105 Special inspections. (a... inspection of any bridge that might have been damaged by a natural or accidental event, including but...

  20. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of the vehicle may not be more than 5 miles per hour when passing over track crossings and turnouts, otherwise, the inspection vehicle speed shall be at the...

  1. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of the vehicle may not be more than 5 miles per hour when passing over track crossings and turnouts, otherwise, the inspection vehicle speed shall be at the...

  2. 49 CFR 213.365 - Visual inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of the vehicle may not be more than 5 miles per hour when passing over track crossings and turnouts, otherwise, the inspection vehicle speed shall be at the...

  3. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  4. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  5. 36 CFR 64.14 - Project inspections.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Project inspections. 64.14... Project inspections. All State and local projects will receive a final inspection by the Bureau. Final... as deemed necessary by the Bureau. Preapproval inspections will also be conducted prior to...

  6. Introduce Construction Technology through Home Inspection

    ERIC Educational Resources Information Center

    Wiggins, Enrique R.

    2007-01-01

    Introducing technology education students to the field of home inspection gives them a great opportunity to learn about and apply construction technology content. In working with his 8th-grade students, the author covers the purpose of a home inspection, the dynamic of home inspections, the process involved in inspecting schools and homes and…

  7. 46 CFR 107.271 - Inspection: Alterations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Inspection: Alterations. 107.271 Section 107.271 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.271 Inspection: Alterations. After plans...

  8. 46 CFR 107.270 - Periodic inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.270 Periodic inspection. (a) Your vessel must undergo...

  9. 46 CFR 107.275 - Other inspections.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Other inspections. 107.275 Section 107.275 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.275 Other inspections. When the Coast Guard receives the...

  10. 46 CFR 107.275 - Other inspections.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Other inspections. 107.275 Section 107.275 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.275 Other inspections. When the Coast Guard receives the...

  11. 46 CFR 107.271 - Inspection: Alterations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Inspection: Alterations. 107.271 Section 107.271 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.271 Inspection: Alterations. After plans...

  12. 46 CFR 107.269 - Annual inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Annual inspection. 107.269 Section 107.269 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling...

  13. 46 CFR 107.269 - Annual inspection.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Annual inspection. 107.269 Section 107.269 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling...

  14. 46 CFR 107.275 - Other inspections.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Other inspections. 107.275 Section 107.275 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.275 Other inspections. When the Coast Guard receives the...

  15. 46 CFR 107.275 - Other inspections.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Other inspections. 107.275 Section 107.275 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.275 Other inspections. When the Coast Guard receives the...

  16. 46 CFR 107.269 - Annual inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Annual inspection. 107.269 Section 107.269 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling...

  17. 46 CFR 107.275 - Other inspections.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Other inspections. 107.275 Section 107.275 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.275 Other inspections. When the Coast Guard receives the...

  18. 46 CFR 107.269 - Annual inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Annual inspection. 107.269 Section 107.269 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling...

  19. 46 CFR 107.269 - Annual inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Annual inspection. 107.269 Section 107.269 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling...

  20. 46 CFR 107.270 - Periodic inspection.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.270 Periodic inspection. (a) Your vessel must undergo...

  1. 46 CFR 107.270 - Periodic inspection.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.270 Periodic inspection. (a) Your vessel must undergo...

  2. 46 CFR 107.271 - Inspection: Alterations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Inspection: Alterations. 107.271 Section 107.271 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.271 Inspection: Alterations. After plans...

  3. 46 CFR 107.271 - Inspection: Alterations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inspection: Alterations. 107.271 Section 107.271 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.271 Inspection: Alterations. After plans...

  4. 46 CFR 107.270 - Periodic inspection.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.270 Periodic inspection. (a) Your vessel must undergo...

  5. 46 CFR 107.271 - Inspection: Alterations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Inspection: Alterations. 107.271 Section 107.271 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.271 Inspection: Alterations. After plans...

  6. 46 CFR 107.270 - Periodic inspection.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.270 Periodic inspection. (a) Your vessel must undergo...

  7. 15 CFR 717.2 - Challenge inspections.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... host and escort the international Inspection Team for challenge inspections in the United States of... hours before the planned arrival of the Inspection Team at the U.S. point of entry. Written notice will... of the Inspection Team members; and (E) All appropriate evidence or reasons provided by...

  8. 46 CFR 115.800 - Inspection standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Inspections § 115.800 Inspection standards. (a) A vessel is inspected for compliance with the standards... marine practice. (b) In the application of inspection standards due consideration must be given to...

  9. 46 CFR 115.800 - Inspection standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Inspections § 115.800 Inspection standards. (a) A vessel is inspected for compliance with the standards... marine practice. (b) In the application of inspection standards due consideration must be given to...

  10. 46 CFR 115.800 - Inspection standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Inspections § 115.800 Inspection standards. (a) A vessel is inspected for compliance with the standards... marine practice. (b) In the application of inspection standards due consideration must be given to...

  11. 46 CFR 115.800 - Inspection standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Inspections § 115.800 Inspection standards. (a) A vessel is inspected for compliance with the standards... marine practice. (b) In the application of inspection standards due consideration must be given to...

  12. 46 CFR 176.800 - Inspection standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... recognized safety associations may be used as guides in the inspection of vessels when such standards do not... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Material Inspections § 176.800 Inspection standards. (a) A vessel is...

  13. A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

    SciTech Connect

    Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I.; Nakajima, T.; Kishimoto, M.; Ahn, B.; Kang, I.; Park, J.-O.; Cho, K.; Han, S.-I.; Laursen, T.

    2010-03-12

    The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.

  14. Why Is It Important to Eat Grains, Especially Whole Grains?

    MedlinePlus

    ... Nutrients and health benefits Print Share Why is it important to eat grains, especially whole grains? Eating ... diabetes. Fiber is important for proper bowel function. It helps reduce constipation and diverticulosis. Fiber-containing foods ...

  15. ROBOTIC TANK INSPECTION END EFFECTOR

    SciTech Connect

    Rachel Landry

    1999-10-01

    The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related subtasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these subtasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these subtasks were derived from the original intent of

  16. The Determinants of Federal and State Enforcement of Workplace Safety Regulations: OSHA Inspections 1990-2010*

    PubMed Central

    Jung, Juergen

    2013-01-01

    We explore the determinants of inspection outcomes across 1.6 million Occupational Safety and Health Agency (OSHA) audits from 1990 through 2010. We find that discretion in enforcement differs in state and federally conducted inspections. State agencies are more sensitive to local economic conditions, finding fewer standard violations and fewer serious violations as unemployment increases. Larger companies receive greater lenience in multiple dimensions. Inspector issued fines and final fines, after negotiated reductions, are both smaller during Republican presidencies. Quantile regression analysis reveals that Presidential and Congressional party affiliations have their greatest impact on the largest negotiated reductions in fines. PMID:24659856

  17. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  18. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates for one inspector New Turkey Inspection (NTI-1 and NTI-1 Modified) and two inspectors New...

  19. Application of Piezocomposite Twin, Side by Side, Phased Array UT Probes for the Inspection of Stainless Steel

    SciTech Connect

    Delaide, M.; Dumas, Ph

    2005-04-09

    UT probes to be used for the examination of coarse-grain structure must allow to detect and size cracks, with a high reliability level. The combination of TRL probes, with phased array and piezocomposite technologies allows to improve probes performances and inspection speed. Single element crystals are replaced by matrix arrays, allowing to deflect and skew the beams, to change the inspection depth. This paper describes the designing, the manufacturing and the characterisation of several probes.

  20. Development of Inspection Robots for Bridge Cables

    PubMed Central

    Kim, Se-Hoon; Lee, Jong-Jae

    2013-01-01

    This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented. PMID:24459453