Science.gov

Sample records for agile development process

  1. Pilot users in agile development processes: motivational factors.

    PubMed

    Johannessen, Liv Karen; Gammon, Deede

    2010-01-01

    Despite a wealth of research on user participation, few studies offer insights into how to involve multi-organizational users in agile development methods. This paper is a case study of user involvement in developing a system for electronic laboratory requisitions using agile methodologies in a multi-organizational context. Building on an interpretive approach, we illuminate questions such as: How does collaboration between users and developers evolve and how might it be improved? What key motivational aspects are at play when users volunteer and continue contributing in the face of considerable added burdens? The study highlights how agile methods in themselves appear to facilitate mutually motivating collaboration between user groups and developers. Lessons learned for leveraging the advantages of agile development processes include acknowledging the substantial and ongoing contributions of users and their roles as co-designers of the system.

  2. Clean, Agile Processing Technology.

    DTIC Science & Technology

    1997-12-01

    Research ltr dtd 10 Jun 98 THIS PAGE IS UNCLASSIFIED FINAL REPORT CLEAN, AGILE PROCESSING TECHNOLOGY Contract # N00014-96-C-0139 PI: S. W . Sinton...Agile Processing Technology . T UNCLAS I N Sinton, S. W.IN S REQUIRED FOR (Explain needin detaiO E C This document is requested by the Canadian Department

  3. Agile Software Development

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  4. Using the Agile Development Methodology and Applying Best Practice Project Management Processes

    DTIC Science & Technology

    2014-12-01

    detrimental to a system architecture function. Proponents of Agile argue that developers in the waterfall 25 development get trapped in “ analysis ...limited to very small web-based socio-technical systems . (Krutchen 2010, 497) 2 . Agile Team Responsibilities So, who on the scrum team is...the use of a sprint 0 in which the system architect, heretofore singularly referred to but reflecting an individual or team approach, will take the

  5. Developing communications requirements for Agile Product Realization

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1994-03-01

    Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.

  6. Inserting Agility in System Development

    DTIC Science & Technology

    2012-07-01

    Agile IT Acquisition, IT Box, Scrum Inserting Agility in System Development Matthew R. Kennedy and Lt Col Dan Ward, USAF With the fast-paced nature...1,700 individuals and 71 countries, found Scrum and eXtreme Programming to be the most widely followed method- ologies (VersionOne, 2007). Other...University http://www.dau.mil 259 Defense ARJ, July 2012, Vol. 19 No. 3 : 249–264 Scrum Scrum is a framework used for project management, which is

  7. Development of a fast, lean and agile direct pelletization process using experimental design techniques.

    PubMed

    Politis, Stavros N; Rekkas, Dimitrios M

    2017-04-01

    A novel hot melt direct pelletization method was developed, characterized and optimized, using statistical thinking and experimental design tools. Mixtures of carnauba wax (CW) and HPMC K100M were spheronized using melted gelucire 50-13 as a binding material (BM). Experimentation was performed sequentially; a fractional factorial design was set up initially to screen the factors affecting the process, namely spray rate, quantity of BM, rotor speed, type of rotor disk, lubricant-glidant presence, additional spheronization time, powder feeding rate and quantity. From the eight factors assessed, three were further studied during process optimization (spray rate, quantity of BM and powder feeding rate), at different ratios of the solid mixture of CW and HPMC K100M. The study demonstrated that the novel hot melt process is fast, efficient, reproducible and predictable. Therefore, it can be adopted in a lean and agile manufacturing setting for the production of flexible pellet dosage forms with various release rates easily customized between immediate and modified delivery.

  8. Agile Development of Advanced Prototypes

    DTIC Science & Technology

    2014-11-01

    genetically modified babies. A case where researchers supplemented women’s defective mitochondria with healthy mitochondria from a donor was...and immersive experience showing genetic engineering’s implication for the future of medicine. 15. SUBJECT TERMS Agile Development, Games for...provoking perspective on genetic engineering’s implication for the future of medicine. Experiencing Living with Prostheses (Xense) During this period

  9. Agile

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2013-01-01

    This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.

  10. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

  11. Teaching Agile Software Development: A Case Study

    ERIC Educational Resources Information Center

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  12. Agile Development Methods for Space Operations

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Webster, Chris

    2012-01-01

    Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

  13. Development of an agility assessment module for preliminary fighter design

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

    1996-01-01

    A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

  14. The Perfect Process Storm: Integration of CMMI, Agile, and Lean Six Sigma

    DTIC Science & Technology

    2012-12-01

    projects using similar iterative methodologies includ- ing Scrum , Crystal, and Feature-driven Development leading to the meeting of the Agile...1986 Lean Six Sigma (LSS) Late 1990’s Lean Production 1990 CMM 1987 - 2002 CMMI 2002V1.3 2010 Agile XP 1996 Agile Manifesto 2001 Scrum 2001...Business Process Improvement. Most recently his efforts have targeted BPI for 22 Agile SCRUM projects, deploy- ing Project and Process Management

  15. Lean and Agile Development of the AITS Ground Software System

    NASA Astrophysics Data System (ADS)

    Richters, Mark; Dutruel, Etienne; Mecredy, Nicolas

    2013-08-01

    We present the ongoing development of a new ground software system used for integrating, testing and operating spacecraft. The Advanced Integration and Test Services (AITS) project aims at providing a solution for electrical ground support equipment and mission control systems in future Astrium Space Transportation missions. Traditionally ESA ground or flight software development projects are conducted according to a waterfall-like process as specified in the ECSS-E-40 standard promoted by ESA in the European industry. In AITS a decision was taken to adopt an agile development process. This work could serve as a reference for future ESA software projects willing to apply agile concepts.

  16. Distributed agile software development for the SKA

    NASA Astrophysics Data System (ADS)

    Wicenec, Andreas; Parsons, Rebecca; Kitaeff, Slava; Vinsen, Kevin; Wu, Chen; Nelson, Paul; Reed, David

    2012-09-01

    The SKA software will most probably be developed by many groups distributed across the globe and coming from dierent backgrounds, like industries and research institutions. The SKA software subsystems will have to cover a very wide range of dierent areas, but still they have to react and work together like a single system to achieve the scientic goals and satisfy the challenging data ow requirements. Designing and developing such a system in a distributed fashion requires proper tools and the setup of an environment to allow for ecient detection and tracking of interface and integration issues in particular in a timely way. Agile development can provide much faster feedback mechanisms and also much tighter collaboration between the customer (scientist) and the developer. Continuous integration and continuous deployment on the other hand can provide much faster feedback of integration issues from the system level to the subsystem developers. This paper describes the results obtained from trialing a potential SKA development environment based on existing science software development processes like ALMA, the expected distribution of the groups potentially involved in the SKA development and experience gained in the development of large scale commercial software projects.

  17. Planning, Estimating, and Monitoring Progress in Agile Systems Development Environments

    DTIC Science & Technology

    2010-04-01

    Jilemanifesto.orgf Nt:JRJ’HRDP GRUMMAN Agile Terminology Term Definition P d B kl R i /U S i b l dro uct ac og equ rements ser tor es to e comp ete Iteration...Marion, McKelvey, & Uhl- Bien . (2007). Leadership Quarterly, 18(4), 298-318. Agile Development Practices Agile Project Management with Scrum Ken Schwaber

  18. The NERV Methodology: Non-Functional Requirements Elicitation, Reasoning and Validation in Agile Processes

    ERIC Educational Resources Information Center

    Domah, Darshan

    2013-01-01

    Agile software development has become very popular around the world in recent years, with methods such as Scrum and Extreme Programming (XP). Literature suggests that functionality is the primary focus in Agile processes while non-functional requirements (NFR) are either ignored or ill-defined. However, for software to be of good quality both…

  19. Achieving Agility and Stability in Large-Scale Software Development

    DTIC Science & Technology

    2013-01-16

    question Which software development process are you currently using? 1. Agile software development (e.g., using Scrum , XP practices, test-driven... Scrum teams, product development teams, component teams, feature teams) spend almost all of their time fixing defects, and new capability...architectural runway provides the degree of architectural stability to support the next n iterations of development. In a Scrum project environment

  20. Achieving Agility and Stability in Large-Scale Software Development

    DTIC Science & Technology

    2013-01-16

    question Which software development process are you currently using? 1. Agile software development (e.g., using Scrum , XP practices, test-driven... Scrum teams, product development teams, component teams, feature teams) spend almost all of their time fixing defects, and new capability...architectural runway provides the degree of architectural stability to support the next n iterations of development. In a Scrum project environment, the

  1. Agile Manufacturing Development of Castings

    DTIC Science & Technology

    2007-11-02

    Consortium was tasked by GE Transportation Systems (GETS) with development of the IFE, a complex ductile iron casting for a commercial loco- motive that... ductile iron foundry with this tooling, it was clear that castings with acceptable quality could not be made. These castings were on the GE...requirements. Therefore, the design specifies a thin - walled casting with complex structures and the requirements demand tight dimensional tolerances and

  2. Planning and scheduling for agile manufacturers: The Pantex Process Model

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Tumquist, M.A.

    1998-02-01

    Effective use of resources that are shared among multiple products or processes is critical for agile manufacturing. This paper describes the development and implementation of a computerized model to support production planning in a complex manufacturing system at the Pantex Plant, a US Department of Energy facility. The model integrates two different production processes (nuclear weapon disposal and stockpile evaluation) that use common facilities and personnel at the plant. The two production processes are characteristic of flow-shop and job shop operations. The model reflects the interactions of scheduling constraints, material flow constraints, and the availability of required technicians and facilities. Operational results show significant productivity increases from use of the model.

  3. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

  4. Peridigm summary report : lessons learned in development with agile components.

    SciTech Connect

    Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John; Parks, Michael L.

    2011-09-01

    This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of this approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.

  5. Future Research in Agile Systems Development: Applying Open Innovation Principles Within the Agile Organisation

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Morgan, Lorraine

    A particular strength of agile approaches is that they move away from ‘introverted' development and intimately involve the customer in all areas of development, supposedly leading to the development of a more innovative and hence more valuable information system. However, we argue that a single customer representative is too narrow a focus to adopt and that involvement of stakeholders beyond the software development itself is still often quite weak and in some cases non-existent. In response, we argue that current thinking regarding innovation in agile development needs to be extended to include multiple stakeholders outside the business unit. This paper explores the intra-organisational applicability and implications of open innovation in agile systems development. Additionally, it argues for a different perspective of project management that includes collaboration and knowledge-sharing with other business units, customers, partners, and other relevant stakeholders pertinent to the business success of an organisation, thus embracing open innovation principles.

  6. A Case Study of Coordination in Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Hole, Steinar; Moe, Nils Brede

    Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

  7. How Can Agile Practices Minimize Global Software Development Co-ordination Risks?

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Babar, Muhammad Ali; Verner, June

    The distribution of project stakeholders in Global Software Development (GSD) projects provides significant risks related to project communication, coordination and control processes. There is growing interest in applying agile practices in GSD projects in order to leverage the advantages of both approaches. In some cases, GSD project managers use agile practices to reduce project distribution challenges. We use an existing coordination framework to identify GSD coordination problems due to temporal, geographical and socio-cultural distances. An industry-based case study is used to describe, explore and explain the use of agile practices to reduce development coordination challenges.

  8. Agile informatics: application of agile project management to the development of a personal health application.

    PubMed

    Chung, Jeanhee; Pankey, Evan; Norris, Ryan J

    2007-10-11

    We describe the application of the Agile method-- a short iteration cycle, user responsive, measurable software development approach-- to the project management of a modular personal health record, iHealthSpace, to be deployed to the patients and providers of a large academic primary care practice.

  9. Modern Enterprise Systems as Enablers of Agile Development

    NASA Astrophysics Data System (ADS)

    Fredriksson, Odd; Ljung, Lennart

    Traditional ES technology and traditional project management methods are supporting and matching each other. But they are not supporting the critical success conditions for ES development in an effective way. Although the findings from one case study of a successful modern ES change project is not strong empirical evidence, we carefully propose that the new modern ES technology is supporting and matching agile project management methods. In other words, it provides the required flexibility which makes it possible to put into practice the agile way of running projects, both for the system supplier and for the customer. In addition, we propose that the combination of modern ES technology and agile project management methods are more appropriate for supporting the realization of critical success conditions for ES development. The main purpose of this chapter is to compare critical success conditions for modern enterprise systems development projects with critical success conditions for agile information systems development projects.

  10. Agile Software Development in Defense Acquisition: A Mission Assurance Perspective

    DTIC Science & Technology

    2012-03-23

    AEROSPACE REPORT NO ATR -2012(9010)-2 Agile Software Development in Defense Acquisition - A Mission Assurance Perspective March 23, 2012 Peter...release; distribution unlimited. aoUc£23>o;r7 AEROSPACE REPORT NO ATR -2012(9010)-2 Agile Software Development in Defense Acquisition - A Mission...Engineering and Technology Group Approved for public release; distribution unlimited. (A\\ AEROSPACE ^•^ Aautoff $m MK*I? taH AEROSPACE REPORT NO ATR

  11. Addressing the Barriers to Agile Development in DoD

    DTIC Science & Technology

    2015-05-01

    acquisition development  IT programs are subject to extensive documentation, reviews, and oversight that inhibits speed and agility needed for IT  Major...Based on Program, Ops, and Technical Risk Structuring an Agile Program  Notional: 6 Month Release with 4-Week Sprints – Continual development...integration, and testing – Monthly demonstration of capabilities to users  Gov’t testers, certifiers, and users involved early and often – Minimizes

  12. Development of EarthCube Governance: An Agile Approach

    NASA Astrophysics Data System (ADS)

    Pearthree, G.; Allison, M. L.; Patten, K.

    2013-12-01

    Governance of geosciences cyberinfrastructure is a complex and essential undertaking, critical in enabling distributed knowledge communities to collaborate and communicate across disciplines, distances, and cultures. Advancing science with respect to 'grand challenges," such as global climate change, weather prediction, and core fundamental science, depends not just on technical cyber systems, but also on social systems for strategic planning, decision-making, project management, learning, teaching, and building a community of practice. Simply put, a robust, agile technical system depends on an equally robust and agile social system. Cyberinfrastructure development is wrapped in social, organizational and governance challenges, which may significantly impede progress. An agile development process is underway for governance of transformative investments in geosciences cyberinfrastructure through the NSF EarthCube initiative. Agile development is iterative and incremental, and promotes adaptive planning and rapid and flexible response. Such iterative deployment across a variety of EarthCube stakeholders encourages transparency, consensus, accountability, and inclusiveness. A project Secretariat acts as the coordinating body, carrying out duties for planning, organizing, communicating, and reporting. A broad coalition of stakeholder groups comprises an Assembly (Mainstream Scientists, Cyberinfrastructure Institutions, Information Technology/Computer Sciences, NSF EarthCube Investigators, Science Communities, EarthCube End-User Workshop Organizers, Professional Societies) to serve as a preliminary venue for identifying, evaluating, and testing potential governance models. To offer opportunity for broader end-user input, a crowd-source approach will engage stakeholders not involved otherwise. An Advisory Committee from the Earth, ocean, atmosphere, social, computer and library sciences is guiding the process from a high-level policy point of view. Developmental

  13. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-09-01

    This paper describes a product realization process developed and demonstrated at Sandia by the A-PRIMED (Agile Product Realization for Innovative Electro MEchanical Devices) project that integrates many of the key components of ``agile manufacturing`` into a complete, design-to-production process. Evidence indicates that the process has reduced the product realization cycle and assured product quality. Products included discriminators for a robotic quick change adapter and for an electronic defense system. These discriminators, built using A-PRIMED, met random vibration requirements and had life cycles that far surpass the performance obtained from earlier efforts.

  14. Adopting best practices: "Agility" moves from software development to healthcare project management.

    PubMed

    Kitzmiller, Rebecca; Hunt, Eleanor; Sproat, Sara Breckenridge

    2006-01-01

    It is time for a change in mindset in how nurses operationalize system implementations and manage projects. Computers and systems have evolved over time from unwieldy mysterious machines of the past to ubiquitous computer use in every aspect of daily lives and work sites. Yet, disconcertingly, the process used to implement these systems has not evolved. Technology implementation does not need to be a struggle. It is time to adapt traditional plan-driven implementation methods to incorporate agile techniques. Agility is a concept borrowed from software development and is presented here because it encourages flexibility, adaptation, and continuous learning as part of the implementation process. Agility values communication and harnesses change to an advantage, which facilitates the natural evolution of an adaptable implementation process. Specific examples of agility in an implementation are described, and plan-driven implementation stages are adapted to incorporate relevant agile techniques. This comparison demonstrates how an agile approach enhances traditional implementation techniques to meet the demands of today's complex healthcare environments.

  15. Integrating Low-Cost Rapid Usability Testing into Agile System Development of Healthcare IT: A Methodological Perspective.

    PubMed

    Kushniruk, Andre W; Borycki, Elizabeth M

    2015-01-01

    The development of more usable and effective healthcare information systems has become a critical issue. In the software industry methodologies such as agile and iterative development processes have emerged to lead to more effective and usable systems. These approaches highlight focusing on user needs and promoting iterative and flexible development practices. Evaluation and testing of iterative agile development cycles is considered an important part of the agile methodology and iterative processes for system design and re-design. However, the issue of how to effectively integrate usability testing methods into rapid and flexible agile design cycles has remained to be fully explored. In this paper we describe our application of an approach known as low-cost rapid usability testing as it has been applied within agile system development in healthcare. The advantages of the integrative approach are described, along with current methodological considerations.

  16. Creativity in Agile Systems Development: A Literature Review

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Wang, Xiaofeng; Fitzgerald, Brian

    Proponents of agile methods claim that enabling, fostering and driving creativity is the key motivation that differentiates agile methods from their more traditional, beauraucratic counterparts. However, there is very little rigorous research to support this claim. Like most of their predecessors, the development and promotion of these methods has been almost entirely driven by practitioners and consultants, with little objective validation from the research community. This lack of validation is particularly relevant for SMEs, given that many of their project teams typify the environment to which agile methods are most suited i.e. small, co-located teams with diverse, blended skills in unstructured, sometimes even chaotic surroundings. This paper uses creativity theory as a lens to review the current agile method literature to understand exactly how much we know about the extent to which creativity actually occurs in these agile environments. The study reveals many gaps and conflict of opinion in the body of knowledge in its current state and identifies many avenues for further research.

  17. Finding Discipline in an Agile Acquisition Process

    DTIC Science & Technology

    2011-05-18

    of technology to deployment Documentation of processes with compliance audits i th t f ll d• ensur ng a processes are o owe Financial performance...deployment Deltas • use case deferrals, shortfalls, test deficiencies are in domain-relevant language of end users and decisions makers – avoids...Bottom Line When we speak of discipline, we are advocating the creation of a more disciplined mechanism (structures + processes) to: • describe user

  18. A Capstone Course on Agile Software Development Using Scrum

    ERIC Educational Resources Information Center

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  19. Agile enterprise development framework utilizing services principles for building pervasive security

    NASA Astrophysics Data System (ADS)

    Farroha, Deborah; Farroha, Bassam

    2011-06-01

    We are in an environment of continuously changing mission requirements and therefore our Information Systems must adapt to accomplish new tasks, quicker, in a more proficient manner. Agility is the only way we will be able to keep up with this change. But there are subtleties that must be considered as we adopt various agile methods: secure, protect, control and authenticate are all elements needed to posture our Information Technology systems to counteract the real and perceived threats in today's environment. Many systems have been tasked to ingest process and analyze different data sets than they were originally designed for and they have to interact with multiple new systems that were unaccounted for at design time. Leveraging the tenets of security, we have devised a new framework that takes agility into a new realm where the product will built to work in a service-based environment but is developed using agile processes. Even though these two criteria promise to hone the development effort, they actually contradict each other in philosophy where Services require stable interfaces, while Agile focuses on being flexible and tolerate changes up to much later stages of development. This framework is focused on enabling a successful product development that capitalizes on both philosophies.

  20. Towards an Understanding of the Conceptual Underpinnings of Agile Development Methodologies

    NASA Astrophysics Data System (ADS)

    Nerur, Sridhar; Cannon, Alan; Balijepally, Venugopal; Bond, Philip

    While the growing popularity of agile development methodologies is undeniable, there has been little systematic exploration of its intellectual foundation. Such an effort would be an important first step in understanding this paradigm's underlying premises. This understanding, in turn, would be invaluable in our assessment of current practices as well as in our efforts to advance the field of software engineering. Drawing on a variety of sources, both within and outside the discipline, we argue that the concepts underpinning agile development methodologies are by no means novel. In the tradition of General Systems Theory this paper advocates a transdisciplinary examination of agile development methodologies to extend the intellectual boundaries of software development. This is particularly important as the field moves beyond instrumental processes aimed at satisfying mere technical considerations.

  1. Impact of Agile Software Development Model on Software Maintainability

    ERIC Educational Resources Information Center

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  2. Agile Software Development Methods: A Comparative Review1

    NASA Astrophysics Data System (ADS)

    Abrahamsson, Pekka; Oza, Nilay; Siponen, Mikko T.

    Although agile software development methods have caught the attention of software engineers and researchers worldwide, scientific research still remains quite scarce. The aim of this study is to order and make sense of the different agile approaches that have been proposed. This comparative review is performed from the standpoint of using the following features as the analytical perspectives: project management support, life-cycle coverage, type of practical guidance, adaptability in actual use, type of research objectives and existence of empirical evidence. The results show that agile software development methods cover, without offering any rationale, different phases of the software development life-cycle and that most of these methods fail to provide adequate project management support. Moreover, quite a few methods continue to offer little concrete guidance on how to use their solutions or how to adapt them in different development situations. Empirical evidence after ten years of application remains quite limited. Based on the results, new directions on agile methods are outlined.

  3. Cross Sectional Study of Agile Software Development Methods and Project Performance

    ERIC Educational Resources Information Center

    Lambert, Tracy

    2011-01-01

    Agile software development methods, characterized by delivering customer value via incremental and iterative time-boxed development processes, have moved into the mainstream of the Information Technology (IT) industry. However, despite a growing body of research which suggests that a predictive manufacturing approach, with big up-front…

  4. Development of a Computer Program for Analyzing Preliminary Aircraft Configurations in Relationship to Emerging Agility Metrics

    NASA Technical Reports Server (NTRS)

    Bauer, Brent

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition, one study illustrates the module's ability to optimize a configuration's agility performance.

  5. Agile based "Semi-"Automated Data ingest process : ORNL DAAC example

    NASA Astrophysics Data System (ADS)

    Santhana Vannan, S. K.; Beaty, T.; Cook, R. B.; Devarakonda, R.; Hook, L.; Wei, Y.; Wright, D.

    2015-12-01

    The ORNL DAAC archives and publishes data and information relevant to biogeochemical, ecological, and environmental processes. The data archived at the ORNL DAAC must be well formatted, self-descriptive, and documented, as well as referenced in a peer-reviewed publication. The ORNL DAAC ingest team curates diverse data sets from multiple data providers simultaneously. To streamline the ingest process, the data set submission process at the ORNL DAAC has been recently updated to use an agile process and a semi-automated workflow system has been developed to provide a consistent data provider experience and to create a uniform data product. The goals of semi-automated agile ingest process are to: 1.Provide the ability to track a data set from acceptance to publication 2. Automate steps that can be automated to improve efficiencies and reduce redundancy 3.Update legacy ingest infrastructure 4.Provide a centralized system to manage the various aspects of ingest. This talk will cover the agile methodology, workflow, and tools developed through this system.

  6. Ramping up for agility: Development of a concurrent engineering communications infrastructure

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1995-09-01

    A-PRIMED (Agile Product Realization for Innovative Electro MEchanical Devices) demonstrated new product development in24 days accompanied by improved product quality, through ability enabling technologies. A concurrent engineering communications infrastructure was developed that provided electronic data communications, information access, enterprise integration of computers and applications, and collaborative work tools. This paper describes how A-PRIMED did it through attention to technologies, processes, and people.

  7. Towards a Framework for Using Agile Approaches in Global Software Development

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Ali Babar, Muhammad; Verner, June

    As agile methods and Global Software Development (GSD) are become increasingly popular, GSD project managers have been exploring the viability of using agile approaches in their development environments. Despite the expected benefits of using an agile approach with a GSD project, the overall combining mechanisms of the two approaches are not clearly understood. To address this challenge, we propose a conceptual framework, based on the research literature. This framework is expected to aid a project manager in deciding what agile strategies are effective for a particular GSD project, taking into account project context. We use an industry-based case study to explore the components of our conceptual framework. Our case study is planned and conducted according to specific published case study guidelines. We identify the agile practices and agile supporting practices used by a GSD project manager in our case study and conclude with future research directions.

  8. The Impacts of Agile Development Methodology Use on Project Success: A Contingency View

    ERIC Educational Resources Information Center

    Tripp, John F.

    2012-01-01

    Agile Information Systems Development Methods have emerged in the past decade as an alternative manner of managing the work and delivery of information systems development teams, with a large number of organizations reporting the adoption & use of agile methods. The practitioners of these methods make broad claims as to the benefits of their…

  9. A process for the agile product realization of electromechanical devices (A-primed)

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1996-02-01

    This paper describes a product realization process developed at Sandia National Laboratories by the A-PRIMED project that integrates many of the key components of ``agile manufacturing`` (Nagel & Dove, 1992) into a complete, step-by-step, design-to-production process. For two separate product realization efforts, each geared to a different set of requirements, A-PRIMED demonstrated product realization of a custom device in less than a month. A-PRIMED used a discriminator (a precision electro mechanical device) as the demonstration device, but the process is readily adaptable to other electro mechanical products. The process begins with a qualified design parameter space (Diegert et al, 1995). From that point, the product realization process encompasses all facets of requirements development, analysis and testing, design, manufacturing, robot assembly and quality assurance, as well as product data management and concurrent engineering. In developing the product realization process, A-PRIMED employed an iterative approach whereby after each build, the process was reviewed and refinements were made on the basis of lessons learned. This paper describes the integration of project functions and product realization technologies to develop a product realization process that on repeated iterations, was proven successful.

  10. Addressing the Barriers to Agile Development in the Department of Defense: Program Structure, Requirements, and Contracting

    DTIC Science & Technology

    2015-04-30

    with the IT Box requirements concept, and thus cannot take advantage of its flexibilities to enable Agile development. In addition, long contracting...place. Many DoD IT acquisition programs are unfamiliar with the IT Box requirements concept, and thus cannot take advantage of its flexibilities to...requirements, and contracting. The DoD can address these barriers by utilizing a proactively tailored Agile acquisition model, implementing an IT Box

  11. Development of perceived competence, tactical skills, motivation, technical skills, and speed and agility in young soccer players.

    PubMed

    Forsman, Hannele; Gråstén, Arto; Blomqvist, Minna; Davids, Keith; Liukkonen, Jarmo; Konttinen, Niilo

    2016-07-01

    The objective of this 1-year, longitudinal study was to examine the development of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics of young Finnish soccer players. We also examined associations between latent growth models of perceived competence and other recorded variables. Participants were 288 competitive male soccer players ranging from 12 to 14 years (12.7 ± 0.6) from 16 soccer clubs. Players completed the self-assessments of perceived competence, tactical skills, and motivation, and participated in technical, and speed and agility tests. Results of this study showed that players' levels of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics remained relatively high and stable across the period of 1 year. Positive relationships were found between these levels and changes in perceived competence and motivation, and levels of perceived competence and speed and agility characteristics. Together these results illustrate the multi-dimensional nature of talent development processes in soccer. Moreover, it seems crucial in coaching to support the development of perceived competence and motivation in young soccer players and that it might be even more important in later maturing players.

  12. An optimized end-to-end process for the analysis of agile earth observation satellite missions

    NASA Astrophysics Data System (ADS)

    Hahn, M.; Müller, T.; Levenhagen, J.

    2014-12-01

    Agile earth observation satellite missions are becoming more and more important due to their capability to perform fast reorientation maneuvers with 3 degrees of freedom to capture different target areas along the orbital path, thus increasing the observed area and complexity of scans. The design of an agile earth observation satellite mission is a non-trivial task due to the fact that a trade-off between observed area and complexity of the scans on the one hand and degree of agility available and thus performance of the attitude control devices on the other hand has to be done. Additionally, the designed mission has to be evaluated in a realistic environment also taking into account the specific characteristics of the chosen actuators. In the present work, several methods are combined to provide an integrated analysis of agile earth observation satellite missions starting from the definition of a desired ground scan scenario, going via the creation of a guidance profile to a realistic simulation and ending at the verification of the feasibility by detailed closed-loop simulation. Regarding its technical implementation at Astrium GmbH, well-proven tools for the different tasks of the analysis are incorporated and well defined interfaces for those tools are specified, allowing a high degree of automatism and thus saving time and minimizing errors. This results in a complete end-to-end process for the design, analysis and verification of agile earth observation satellite missions. This process is demonstrated by means of an example analysis using control moment gyros for a high agility mission.

  13. An Agile Systems Engineering Process: The Missing Link?

    DTIC Science & Technology

    2011-05-01

    Quality Management Systems. 2008. 26. Standardization, International Organization for. “ ISO 12207.” Software Life Cycle Processes. 2008. 27. Software...has a num- ber of standards available such as ISO 12207, ISO 9001 and the Capability Maturity Model Integrated (CMMI®) [24,25,26]. The CMMI was a...Of The Air. Life Cycle Systems Engineering. 2007 24. CMMI® for Development, Version 1.2. Pittsburgh: Carnegie Mellon University, 2006. 25. “ ISO 9001

  14. The Army Game Studios Agile Process: A Retrospective

    DTIC Science & Technology

    2012-04-26

    23-26, 2012 WWW.SSTC-ONLINE.ORG The Army Game Studio adopted Scrum because of a growing Team, growing Project sizes and the creation of a...Instructor Workstation • Vehicles • Dismount SYSTEMS & SOFTWARE TECHNOLOGY CONFERENCE APRIL 23-26, 2012 WWW.SSTC-ONLINE.ORG AAVP3 / Scrum ... Scrum was a process that fit our development style: – Requirements are never in stone, and most of the time are not completely known when funding occurs

  15. Agile development approach for the observatory control software of the DAG 4m telescope

    NASA Astrophysics Data System (ADS)

    Güçsav, B. Bülent; ćoker, Deniz; Yeşilyaprak, Cahit; Keskin, Onur; Zago, Lorenzo; Yerli, Sinan K.

    2016-08-01

    Observatory Control Software for the upcoming 4m infrared telescope of DAG (Eastern Anatolian Observatory in Turkish) is in the beginning of its lifecycle. After the process of elicitation-validation of the initial requirements, we have been focused on preparation of a rapid conceptual design not only to see the big picture of the system but also to clarify the further development methodology. The existing preliminary designs for both software (including TCS and active optics control system) and hardware shall be presented here in brief to exploit the challenges the DAG software team has been facing with. The potential benefits of an agile approach for the development will be discussed depending on the published experience of the community and on the resources available to us.

  16. Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

    PubMed Central

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  17. Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

    PubMed

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API.

  18. Human factors in agile manufacturing

    SciTech Connect

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  19. Some Findings Concerning Requirements in Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  20. Agile in Large-Scale Development Workshop: Coaching, Transitioning and Practicing

    NASA Astrophysics Data System (ADS)

    Nilsson, Thomas; Larsson, Andreas

    Agile in large-scale and complex development presents its own set of problems, both how to practice, transition and coaching. This workshop aims at bringing persons interested in this topic together to share tools, techniques and insights. The workshop will follow the increasingly popular “lightning talk + open space” format.

  1. Agile Mythbusting

    DTIC Science & Technology

    2015-01-01

    does not fit all Scrum : The most adopted Agile method Scaling Agile Methods: Going beyond the team level methods Challenges to Agile Adoption: What’s...Arsenal Lapham, Wrubel Jan 2015 © 2015 Carnegie Mellon University. Myth: You Must Choose Agile or Waterfall – you can’t do both What about “water- scrum ...used in multiple environments, including DoD programs.1 1Start with “Agile EVM in Scrum Projects” from AGILE 2006 to get started learning about Agile

  2. Architecting for Large Scale Agile Software Development: A Risk-Driven Approach

    DTIC Science & Technology

    2013-05-01

    addressed aspect of scale in agile software development. Practices such as Scrum of Scrums are meant to address orchestration of multiple development...owner, Scrum master) have differing responsibilities from the roles in the existing phase-based waterfall program structures. Such differences may... Scrum . Communication with both internal and external stakeholders must be open and documentation should not be used as a substitute for communication

  3. Insights into Global Health Practice from the Agile Software Development Movement

    PubMed Central

    Flood, David; Chary, Anita; Austad, Kirsten; Diaz, Anne Kraemer; García, Pablo; Martinez, Boris; Canú, Waleska López; Rohloff, Peter

    2016-01-01

    Global health practitioners may feel frustration that current models of global health research, delivery, and implementation are overly focused on specific interventions, slow to provide health services in the field, and relatively ill-equipped to adapt to local contexts. Adapting design principles from the agile software development movement, we propose an analogous approach to designing global health programs that emphasizes tight integration between research and implementation, early involvement of ground-level health workers and program beneficiaries, and rapid cycles of iterative program improvement. Using examples from our own fieldwork, we illustrate the potential of ‘agile global health’ and reflect on the limitations, trade-offs, and implications of this approach. PMID:27134081

  4. Accelerating Software Development through Agile Practices--A Case Study of a Small-Scale, Time-Intensive Web Development Project at a College-Level IT Competition

    ERIC Educational Resources Information Center

    Zhang, Xuesong; Dorn, Bradley

    2012-01-01

    Agile development has received increasing interest both in industry and academia due to its benefits in developing software quickly, meeting customer needs, and keeping pace with the rapidly changing requirements. However, agile practices and scrum in particular have been mainly tested in mid- to large-size projects. In this paper, we present…

  5. Agile Development and Software Architecture: Understanding Scale and Risk

    DTIC Science & Technology

    2011-10-24

    SEIVirtualForum Symptoms of failure  Teams (e.g., Scrum teams, product development teams, component teams, feature teams) spend almost all of...stability to support the next n iterations of development. In a Scrum project environment, the architectural runway may be established during...infrastructure Presentation Layer Common Service Common Service Common Service API APIData Access Layer Domain Layer Scrum Team A Scrum Team B Scrum Team C

  6. Agile Development and Software Architecture: Understanding Scale and Risk

    DTIC Science & Technology

    2012-04-26

    In a Scrum project environment, the architectural runway may be established during Sprint 0. Sprint 0 might have a longer duration than the rest of...architecture In its simplest instantiation, a Scrum development environment consists of: • a single co-located, cross-functional team • with skills...cause analysis: Typical problem 1 Symptom • Scrum teams spend almost all of their time fixing defects, and new feature development is continuously

  7. Agile Project Management for e-Learning Developments

    ERIC Educational Resources Information Center

    Doherty, Iain

    2010-01-01

    We outline the project management tactics that we developed in praxis in order to manage elearning projects and show how our tactics were enhanced through implementing project management techniques from a formal project management methodology. Two key factors have contributed to our project management success. The first is maintaining a clear…

  8. Agile Methods for Open Source Safety-Critical Software

    PubMed Central

    Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-01-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  9. Agile Methods for Open Source Safety-Critical Software.

    PubMed

    Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-08-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion.

  10. An agile implementation of SCRUM

    NASA Astrophysics Data System (ADS)

    Gannon, Michele

    Is Agile a way to cut corners? To some, the use of an Agile Software Development Methodology has a negative connotation - “ Oh, you're just not producing any documentation” . So can a team with no experience in Agile successfully implement and use SCRUM?

  11. Agile software development in an earned value world: a survival guide

    NASA Astrophysics Data System (ADS)

    Kantor, Jeffrey; Long, Kevin; Becla, Jacek; Economou, Frossie; Gelman, Margaret; Juric, Mario; Lambert, Ron; Krughoff, Simon; Swinbank, John D.; Wu, Xiuqin

    2016-08-01

    Agile methodologies are current best practice in software development. They are favored for, among other reasons, preventing premature optimization by taking a somewhat short-term focus, and allowing frequent replans/reprioritizations of upcoming development work based on recent results and current backlog. At the same time, funding agencies prescribe earned value management accounting for large projects which, these days, inevitably include substantial software components. Earned Value approaches emphasize a more comprehensive and typically longer-range plan, and tend to characterize frequent replans and reprioritizations as indicative of problems. Here we describe the planning, execution and reporting framework used by the LSST Data Management team, that navigates these opposite tensions.

  12. Empirical Agility

    DTIC Science & Technology

    2014-06-01

    documented the fact that Unmanned Aerial Vehicles (now more commonly called drones ) added substantially to the quality of surveillance, resulting in better...Battalions. CACI Inc.-Federal, Arlington, Virginia. 1977. DTIC Accession Number ADA123481. Olmstead, Joseph A., B. Leon Elder, and John M...greater agility – Drones improved agility in ground and air operations – Nelson’s C2 at Trafalgar demonstrated agility. Theater Level C2 During WW II

  13. Ground System Architectures Workshop GMSEC SERVICES SUITE (GSS): an Agile Development Story

    NASA Technical Reports Server (NTRS)

    Ly, Vuong

    2017-01-01

    The GMSEC (Goddard Mission Services Evolution Center) Services Suite (GSS) is a collection of tools and software services along with a robust customizable web-based portal that enables the user to capture, monitor, report, and analyze system-wide GMSEC data. Given our plug-and-play architecture and the needs for rapid system development, we opted to follow the Scrum Agile Methodology for software development. Being one of the first few projects to implement the Agile methodology at NASA GSFC, in this presentation we will present our approaches, tools, successes, and challenges in implementing this methodology. The GMSEC architecture provides a scalable, extensible ground and flight system for existing and future missions. GMSEC comes with a robust Application Programming Interface (GMSEC API) and a core set of Java-based GMSEC components that facilitate the development of a GMSEC-based ground system. Over the past few years, we have seen an upbeat in the number of customers who are moving from a native desktop application environment to a web based environment particularly for data monitoring and analysis. We also see a need to provide separation of the business logic from the GUI display for our Java-based components and also to consolidate all the GUI displays into one interface. This combination of separation and consolidation brings immediate value to a GMSEC-based ground system through increased ease of data access via a uniform interface, built-in security measures, centralized configuration management, and ease of feature extensibility.

  14. Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

    NASA Technical Reports Server (NTRS)

    Wetherholt, Martha

    2016-01-01

    To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

  15. ISS Double-Gimbaled CMG Subsystem Simulation Using the Agile Development Method

    NASA Technical Reports Server (NTRS)

    Inampudi, Ravi

    2016-01-01

    This paper presents an evolutionary approach in simulating a cluster of 4 Control Moment Gyros (CMG) on the International Space Station (ISS) using a common sense approach (the agile development method) for concurrent mathematical modeling and simulation of the CMG subsystem. This simulation is part of Training systems for the 21st Century simulator which will provide training for crew members, instructors, and flight controllers. The basic idea of how the CMGs on the space station are used for its non-propulsive attitude control is briefly explained to set up the context for simulating a CMG subsystem. Next different reference frames and the detailed equations of motion (EOM) for multiple double-gimbal variable-speed control moment gyroscopes (DGVs) are presented. Fixing some of the terms in the EOM becomes the special case EOM for ISS's double-gimbaled fixed speed CMGs. CMG simulation development using the agile development method is presented in which customer's requirements and solutions evolve through iterative analysis, design, coding, unit testing and acceptance testing. At the end of the iteration a set of features implemented in that iteration are demonstrated to the flight controllers thus creating a short feedback loop and helping in creating adaptive development cycles. The unified modeling language (UML) tool is used in illustrating the user stories, class designs and sequence diagrams. This incremental development approach of mathematical modeling and simulating the CMG subsystem involved the development team and the customer early on, thus improving the quality of the working CMG system in each iteration and helping the team to accurately predict the cost, schedule and delivery of the software.

  16. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    ERIC Educational Resources Information Center

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  17. Reactive Agility Performance in Handball; Development and Evaluation of a Sport-Specific Measurement Protocol.

    PubMed

    Spasic, Miodrag; Krolo, Ante; Zenic, Natasa; Delextrat, Anne; Sekulic, Damir

    2015-09-01

    There is no current study that examined sport-specific tests of reactive-agility and change-of-direction-speed (CODS) to replicate real-sport environment in handball (team-handball). This investigation evaluated the reliability and validity of two novel tests designed to assess reactive-agility and CODS of handball players. Participants were female (25.14 ± 3.71 years of age; 1.77 ± 0.09 m and 74.1 ± 6.1 kg) and male handball players (26.9 ± 4.1 years of age; 1.90 ± 0.09 m and 93.90±4.6 kg). Variables included body height, body mass, body mass index, broad jump, 5-m sprint, CODS and reactive-agility tests. Results showed satisfactory reliability for reactive-agility-test and CODS-test (ICC of 0.85-0.93, and CV of 2.4-4.8%). The reactive-agility and CODS shared less than 20% of the common variance. The calculated index of perceptual and reactive capacity (P&RC; ratio between reactive-agility- and CODS-performance) is found to be valid measure in defining true-game reactive-agility performance in handball in both genders. Therefore, the handball athletes' P&RC should be used in the evaluation of real-game reactive-agility performance. Future studies should explore other sport-specific reactive-agility tests and factors associated to such performance in sports involving agile maneuvers. Key pointsReactive agility and change-of-direction-speed should be observed as independent qualities, even when tested over the same course and similar movement templateThe reactive-agility-performance of the handball athletes involved in defensive duties is closer to their non-reactive-agility-score than in their peers who are not involved in defensive dutiesThe handball specific "true-game" reactive-agility-performance should be evaluated as the ratio between reactive-agility and corresponding CODS performance.

  18. Development of a low-cost, low micro-vibration CMG for small agile satellite applications

    NASA Astrophysics Data System (ADS)

    Kawak, B. J.

    2017-02-01

    The agility of the spacecraft which refers to the spacecraft's ability to execute fast and accurate manoeuvers within a fixed period of time, is a key satellite parameter. The spacecraft' s agility is directly proportional to the spacecraft actuators' output torque. For high torque inertial actuators (>0.5 Nm), Control Moment Gyroscope (CMG) exhibits better performances in terms of mass and electrical power consumption than reaction wheels. However, in addition to the complex steering law required to avoid CMG singularities, one of the reasons why CMGs are not widely used is also due to their high micro-vibration emission which may interfere and disrupt the spacecraft' s sensitive instruments such as optical payloads. In this paper, an innovative two-stage viscoelastic isolation system has been designed and implemented in a new low micro-vibration CMG prototype. The first stage of the damping system acts at bearing level to attenuate the possible shock vibrations while the second stage acts at mechanism level to attenuate the structural resonances and motor noise. The developed CMG enables to combine high actuator output torque with a low micro-vibration signature. The viscoelastic damping system is cost effective as it is a fully passive system which requires no thermal control and no electronics. Furthermore, the attenuation provided by this innovative two stage damping system can reach a slope up to -80 dB/dec which leads to a Mini-CMG micro-vibration signature lower than similar output torque reaction wheels not equipped with a damping system.

  19. Applying Agile Methods to the Development of a Community-Based Sea Ice Observations Database

    NASA Astrophysics Data System (ADS)

    Pulsifer, P. L.; Collins, J. A.; Kaufman, M.; Eicken, H.; Parsons, M. A.; Gearheard, S.

    2011-12-01

    Local and traditional knowledge and community-based monitoring programs are increasingly being recognized as an important part of establishing an Arctic observing network, and understanding Arctic environmental change. The Seasonal Ice Zone Observing Network (SIZONet, http://www.sizonet.org) project has implemented an integrated program for observing seasonal ice in Alaska. Observation and analysis by local sea ice experts helps track seasonal and inter-annual variability of the ice cover and its use by coastal communities. The ELOKA project (http://eloka-arctic.org) is collaborating with SIZONet on the development of a community accessible, Web-based application for collecting and distributing local observations. The SIZONet project is dealing with complicated qualitative and quantitative data collected from a growing number of observers in different communities while concurrently working to design a system that will serve a wide range of different end users including Arctic residents, scientists, educators, and other stakeholders with a need for sea ice information. The benefits of linking and integrating knowledge from communities and university-based researchers are clear, however, development of an information system in this multidisciplinary, multi-participant context is challenging. Participants are geographically distributed, have different levels of technical expertise, and have varying goals for how the system will be used. As previously reported (Pulsifer et al. 2010), new technologies have been used to deal with some of the challenges presented in this complex development context. In this paper, we report on the challenges and innovations related to working as a multi-disciplinary software development team. Specifically, we discuss how Agile software development methods have been used in defining and refining user needs, developing prototypes, and releasing a production level application. We provide an overview of the production application that

  20. Development of telemetry for the agility flight test of a radio controlled fighter model

    NASA Astrophysics Data System (ADS)

    Gallagher, Michael J.

    1992-03-01

    Advanced design tools, control devices, and supermaneuverability concepts provide innovative solutions to traditional aircraft design trade-offs. Emerging technologies enable improved agility throughout the performance envelope. Unmanned Air Vehicles provide an excellent platform for dynamic measurements and agility research. A 1/8-scaled F-16A ducted-fan radio-controlled aircraft was instrumented with a telemetry system to acquire angle of attack, sideslip angle, control surface deflection, throttle position, and airspeed data. A portable ground station was built to record and visually present real-time telemetry data. Flight tests will be conducted to acquire baseline high angle-of-attack performance measurements, and follow-on research will evaluate agility improvements with varied control configurations.

  1. Coaching for Better (Software) Buying Power in an Agile World

    DTIC Science & Technology

    2013-06-01

    professionals carefully to consider incorporation of agile methodologies into the set of acquisition tools at their disposal. This transformation is not...believes that DevOps , the process of warfighters and developers work- ing together throughout the project, is superior to volumes of detailed...Professionalism of the Total Acquisition Workforce The DoD needs to invest in training the acquisition workforce in agile methodologies to add tools that

  2. Development and Evaluation of an Inverse Solution Technique for Studying Helicopter Maneuverability and Agility

    DTIC Science & Technology

    1991-07-01

    three maneuvers. For the purposes of this study, maneuverability is defined as the maximum achievable time rate of change of the velocity vector at any...point in the flight envelope, and agility is defined as the maximum achievable time- rate - of - change of the acceleration vector at any point in the flight envelope.

  3. Lean Mission Operations Systems Design - Using Agile and Lean Development Principles for Mission Operations Design and Development

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2014-01-01

    The Resource Prospector Mission seeks to rove the lunar surface with an in-situ resource utilization payload in search of volatiles at a polar region. The mission operations system (MOS) will need to perform the short-duration mission while taking advantage of the near real time control that the short one-way light time to the Moon provides. To maximize our use of limited resources for the design and development of the MOS we are utilizing agile and lean methods derived from our previous experience with applying these methods to software. By using methods such as "say it then sim it" we will spend less time in meetings and more time focused on the one outcome that counts - the effective utilization of our assets on the Moon to meet mission objectives.

  4. Achieving agility through parameter space qualification

    SciTech Connect

    Diegert, K.V.; Easterling, R.G.; Ashby, M.R.; Benavides, G.L.; Forsythe, C.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-02-01

    The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.

  5. An Investigation of Agility Issues in Scrum Teams Using Agility Indicators

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Wang, Xiaofeng

    Agile software development methods have emerged and become increasingly popular in recent years; yet the issues encountered by software development teams that strive to achieve agility using agile methods are yet to be explored systematically. Built upon a previous study that has established a set of indicators of agility, this study investigates what issues are manifested in software development teams using agile methods. It is focussed on Scrum teams particularly. In other words, the goal of the chapter is to evaluate Scrum teams using agility indicators and therefore to further validate previously presented agility indicators within the additional cases. A multiple case study research method is employed. The findings of the study reveal that the teams using Scrum do not necessarily achieve agility in terms of team autonomy, sharing, stability and embraced uncertainty. The possible reasons include previous organizational plan-driven culture, resistance towards the Scrum roles and changing resources.

  6. XP Workshop on Agile Product Line Engineering

    NASA Astrophysics Data System (ADS)

    Ghanam, Yaser; Cooper, Kendra; Abrahamsson, Pekka; Maurer, Frank

    Software Product Line Engineering (SPLE) promises to lower the costs of developing individual applications as they heavily reuse existing artifacts. Besides decreasing costs, software reuse achieves faster development and higher quality. Traditionally, SPLE favors big design upfront and employs traditional, heavy weight processes. On the other hand, agile methods have been proposed to rapidly develop high quality software by focusing on producing working code while reducing upfront analysis and design. Combining both paradigms, although is challenging, can yield significant improvements.

  7. Agile Metrics: Progress Monitoring of Agile Contractors

    DTIC Science & Technology

    2014-01-01

    can be tailored to leverage the iterative nature of Agile meth- ods. Using optional contract funding lines or indefinite delivery indefinite quantity... naturally created during the execution of the Agile implementation. In the following paragraphs, we identify issues to consider in building an Agile...employing Agile methods [Hartman 2006]. Be prepared to mine and effectively use the metrics data that naturally occur in typical Ag- ile teams. In

  8. Development and evaluation of an inverse solution technique for studying helicopter maneuverability and agility

    NASA Technical Reports Server (NTRS)

    Whalley, Matthew S.

    1991-01-01

    An inverse solution technique for determining the maximum maneuvering performance of a helicopter using smooth, pilotlike control inputs is presented. Also described is a pilot simulation experiment performed to investigate the accuracy of the solution resulting from this technique. The maneuverability and agility capability of the helicopter math model was varied by varying the pitch and roll damping, the maximum pitch and roll rate, and the maximum load-factor capability. Three maneuvers were investigated: a 180-deg turn, a longitudinal pop-up, and a lateral jink. The inverse solution technique yielded accurate predictions of pilot-in-the-loop maneuvering performance for two of the three maneuvers.

  9. Utilization of an agility assessment module in analysis and optimization of preliminary fighter configuration

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Biezad, Daniel

    1996-01-01

    A study has been conducted to develop and to analyze a FORTRAN computer code for performing agility analysis on fighter aircraft configurations. This program is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. The validity of the existing code was evaluated by comparing with existing flight test data. A FORTRAN program was developed for a specific metric, PM (Pointing Margin), as part of the agility module. Example trade studies using the agility module along with ACSYNT were conducted using a McDonnell Douglas F/A-18 Hornet aircraft model. Tile sensitivity of thrust loading, wing loading, and thrust vectoring on agility criteria were investigated. The module can compare the agility potential between different configurations and has capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements in the preliminary design.

  10. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  11. Implementing Kanban for agile process management within the ALMA Software Operations Group

    NASA Astrophysics Data System (ADS)

    Reveco, Johnny; Mora, Matias; Shen, Tzu-Chiang; Soto, Ruben; Sepulveda, Jorge; Ibsen, Jorge

    2014-07-01

    After the inauguration of the Atacama Large Millimeter/submillimeter Array (ALMA), the Software Operations Group in Chile has refocused its objectives to: (1) providing software support to tasks related to System Integration, Scientific Commissioning and Verification, as well as Early Science observations; (2) testing the remaining software features, still under development by the Integrated Computing Team across the world; and (3) designing and developing processes to optimize and increase the level of automation of operational tasks. Due to their different stakeholders, each of these tasks presents a wide diversity of importances, lifespans and complexities. Aiming to provide the proper priority and traceability for every task without stressing our engineers, we introduced the Kanban methodology in our processes in order to balance the demand on the team against the throughput of the delivered work. The aim of this paper is to share experiences gained during the implementation of Kanban in our processes, describing the difficulties we have found, solutions and adaptations that led us to our current but still evolving implementation, which has greatly improved our throughput, prioritization and problem traceability.

  12. Process development

    NASA Technical Reports Server (NTRS)

    Bickler, D. B.

    1985-01-01

    An overview is given of seven process development activities which were presented at this session. Pulsed excimer laser processing of photovoltaic cells was presented. A different pulsed excimer laser annealing was described using a 50 w laser. Diffusion barrier research focused on lowering the chemical reactivity of amorphous thin film on silicon. In another effort adherent and conductive films were successfully achieved. Other efforts were aimed at achieving a simultaneous front and back junction. Microwave enhanced plasma deposition experiments were performed. An updated version of the Solar Array Manufacturing Industry Costing Standards (SAMICS) was presented, along with a life cycle cost analysis of high efficiency cells. The last presentation was on the evaluation of the ethyl vinyl acetate encapsulating system.

  13. Agile manufacturing: The factory of the future

    NASA Technical Reports Server (NTRS)

    Loibl, Joseph M.; Bossieux, Terry A.

    1994-01-01

    The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

  14. Compact, Automated, Frequency-Agile Microspectrofluorimeter

    NASA Technical Reports Server (NTRS)

    Fernandez, Salvador M.; Guignon, Ernest F.

    1995-01-01

    Compact, reliable, rugged, automated cell-culture and frequency-agile microspectrofluorimetric apparatus developed to perform experiments involving photometric imaging observations of single live cells. In original application, apparatus operates mostly unattended aboard spacecraft; potential terrestrial applications include automated or semiautomated diagnosis of pathological tissues in clinical laboratories, biomedical instrumentation, monitoring of biological process streams, and portable instrumentation for testing biological conditions in various environments. Offers obvious advantages over present laboratory instrumentation.

  15. Development of an agile knowledge engineering framework in support of multi-disciplinary translational research.

    PubMed

    Borlawsky, Tara B; Dhaval, Rakesh; Hastings, Shannon L; Payne, Philip R O

    2009-03-01

    In October 2006, the National Institutes of Health launched a new national consortium, funded through Clinical and Translational Science Awards (CTSA), with the primary objective of improving the conduct and efficiency of the inherently multi-disciplinary field of translational research. To help meet this goal, the Ohio State University Center for Clinical and Translational Science has launched a knowledge management initiative that is focused on facilitating widespread semantic interoperability among administrative, basic science, clinical and research computing systems, both internally and among the translational research community at-large, through the integration of domain-specific standard terminologies and ontologies with local annotations. This manuscript describes an agile framework that builds upon prevailing knowledge engineering and semantic interoperability methods, and will be implemented as part this initiative.

  16. Onshore and Offshore Outsourcing with Agility: Lessons Learned

    NASA Astrophysics Data System (ADS)

    Kussmaul, Clifton

    This chapter reflects on case study based an agile distributed project that ran for approximately three years (from spring 2003 to spring 2006). The project involved (a) a customer organization with key personnel distributed across the US, developing an application with rapidly changing requirements; (b) onshore consultants with expertise in project management, development processes, offshoring, and relevant technologies; and (c) an external offsite development team in a CMM-5 organization in southern India. This chapter is based on surveys and discussions with multiple participants. The several years since the project was completed allow greater perspective on both the strengths and weaknesses, since the participants can reflect on the entire life of the project, and compare it to subsequent experiences. Our findings emphasize the potential for agile project management in distributed software development, and the importance of people and interactions, taking many small steps to find and correct errors, and matching the structures of the project and product to support implementation of agility.

  17. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  18. Assessment of proposed fighter agility metrics

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.; Downing, David R.

    1990-01-01

    This paper presents the results of an analysis of proposed metrics to assess fighter aircraft agility. A novel framework for classifying these metrics is developed and applied. A set of transient metrics intended to quantify the axial and pitch agility of fighter aircraft is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction method are proposed, and sensitivities to pilot introduced errors during flight testing is investigated. Results indicate that the power onset and power loss parameters are promising candidates for quantifying axial agility, while maximum pitch up and pitch down rates are for quantifying pitch agility.

  19. The RITE Approach to Agile Acquisition

    DTIC Science & Technology

    2013-04-01

    Review (SVR), and Production Readiness Review ( PRR ), which were evaluated against Agile development requirements. Further analysis was conducted...Audit (FCA), PRR , Operational Test Readiness Review (OTRR), Physical Configuration Audit (PCA), Integration Readiness Review (IRR), In Service...Technology (DSB Task Force, 2009, p. 48) In the context of the primary milestone reviews (PDR, CDR, and SVR/ PRR ), a nominal Agile development structure was

  20. Making Agile Work for You

    DTIC Science & Technology

    2011-07-20

    Extreme Programming (XP) • SCRUM • Dynamic Systems Development Method (DSDM) • Adaptive Software Development • Crystal • Feature-Driven Development...Carnegie Mellon University Twitter #seiwebinar SCRUM Scrum is an iterative, incremental methodology for managing agile software projects. The Team

  1. An Agile Course-Delivery Approach

    ERIC Educational Resources Information Center

    Capellan, Mirkeya

    2009-01-01

    In the world of software development, agile methodologies have gained popularity thanks to their lightweight methodologies and flexible approach. Many advocates believe that agile methodologies can provide significant benefits if applied in the educational environment as a teaching method. The need for an approach that engages and motivates…

  2. Agility Quotient (AQ)

    DTIC Science & Technology

    2014-06-01

    system?s Agility IQ ?? and ?What is the requisite amount of Agility that is required?? This paper suggests a way forward and illustrates it, in the...answer two questions. “How can we measure a system’s Agility IQ ?” and “What is the requisite amount of Agility that is required?” This paper...agility is worth our attention. AQ can be patterned after the Intelligence Quotient ( IQ ). IQ is a score that is associated with educational potential

  3. Transitioning from Distributed and Traditional to Distributed and Agile: An Experience Report

    NASA Astrophysics Data System (ADS)

    Wildt, Daniel; Prikladnicki, Rafael

    Global companies that experienced extensive waterfall phased plans are trying to improve their existing processes to expedite team engagement. Agile methodologies have become an acceptable path to follow because it comprises project management as part of its practices. Agile practices have been used with the objective of simplifying project control through simple processes, easy to update documentation and higher team iteration over exhaustive documentation, focusing rather on team continuous improvement and aiming to add value to business processes. The purpose of this chapter is to describe the experience of a global multinational company on transitioning from distributed and traditional to distributed and agile. This company has development centers across North America, South America and Asia. This chapter covers challenges faced by the project teams of two pilot projects, including strengths of using agile practices in a globally distributed environment and practical recommendations for similar endeavors.

  4. Agile High-Fidelity Mcnp Model Development Techniques for Rapid Mechanical Design Iteration

    NASA Astrophysics Data System (ADS)

    Kulesza, Joel A.

    2009-08-01

    In order to finalize mechanical design details and perform the associated radiological analyses for the AP1000 pressurized water reactor integrated head package (IHP) in time to meet industrial obligations, a process was developed that allowed a radiological analyst to rapidly respond to changing design criteria. This process used several tools together, most of which were freely available, that enabled the analyst to rapidly re-model both geometrical and radiological details, perform a three-dimensional dose field analysis with MCNP5, examine the results, and present the results in an informative and easily understandable manner to other technical working groups. Thus far the author has used this process to study the radiological impacts of different sources due to various incore instrumentation thimble assembly (IITA) materials, different IITA shield alloys and geometrical configurations, different MP shroud thicknesses, and parameterized air duct wall thicknesses and complementary shielding. Model processing before execution will be discussed in detail. Techniques will also be described which allow for rapid spatial redistribution based on the modified source term. Post processing tools and methods will also be described that yield both qualitative and quantitative results.

  5. Decision Support for Iteration Scheduling in Agile Environments

    NASA Astrophysics Data System (ADS)

    Szőke, Ákos

    Today’s software business development projects often lay claim to low-risk value to the customers in order to be financed. Emerging agile processes offer shorter investment periods, faster time-to-market and better customer satisfaction. To date, however, in agile environments there is no sound methodological schedule support contrary to the traditional plan-based approaches. To address this situation, we present an agile iteration scheduling method whose usefulness is evaluated with post-mortem simulation. It demonstrates that the method can significantly improve load balancing of resources (cca. 5×), produce higher quality and lower-risk feasible schedule, and provide more informed and established decisions by optimized schedule production. Finally, the paper analyzes benefits and issues from the use of this method.

  6. Development of a high-speed wavelength-agile CO2 local oscillator for heterodyne DIAL measurements

    NASA Astrophysics Data System (ADS)

    Senft, Daniel C.; Pierrottet, Diego F.

    2002-06-01

    A high repetition rate, wavelength agile CO2 laser has been developed at the Air Force Research Laboratory for use as a local oscillator in a heterodyne detection receiver. Fats wavelength selection is required for measurements of airborne chemical vapors using the differential absorption lidar (DIAL) technique. Acousto-optic modulator are used to tune between different wavelengths at high speeds without the need for moving mechanical parts. Other advantages obtained by the use of acousto-optic modulators are laser output power control per wavelength and rugged packaging for field applications. The local oscillator design is described, and the results from laboratory DIAL measurements are presented. The coherent remote optical sensor system is an internal research project being conducted by the Air Force Research Laboratory Directed Energy Directorate, Active Remote Sensing Branch. The objective of the project is to develop a new long-range standoff spectral sensor that takes advantage of the enhanced performance capabilities coherent detection can provide. Emphasis of the development is on a low cost, compact, and rugged active sensor exclusively designed for heterodyne detection using the differential absorption lidar technique. State of the art technologies in waveguide laser construction and acousto- optics make feasible the next generation of lasers capable of supporting coherent lidar system requirements. Issues addressed as part of the development include optoelectronic engineering of a low cost rugged system, and fast data throughput for real time chemical concentration measurements. All hardware used in this sensor are off-the- shelf items, so only minor hardware modifications were required for the system as it stands. This paper describes a high-speed heterodyne detection CO2 DIAL system that employs a wavelength agile, acousto-optically tuned local oscillator in the receiver. Sample experimental data collected in a controlled environment are presented as

  7. Agile manufacturing from a statistical perspective

    SciTech Connect

    Easterling, R.G.

    1995-10-01

    The objective of agile manufacturing is to provide the ability to quickly realize high-quality, highly-customized, in-demand products at a cost commensurate with mass production. More broadly, agility in manufacturing, or any other endeavor, is defined as change-proficiency; the ability to thrive in an environment of unpredictable change. This report discusses the general direction of the agile manufacturing initiative, including research programs at the National Institute of Standards and Technology (NIST), the Department of Energy, and other government agencies, but focuses on agile manufacturing from a statistical perspective. The role of statistics can be important because agile manufacturing requires the collection and communication of process characterization and capability information, much of which will be data-based. The statistical community should initiate collaborative work in this important area.

  8. Processes and process development

    NASA Astrophysics Data System (ADS)

    Hwang, H. L.

    1986-02-01

    Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

  9. Fighter agility metrics, research, and test

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.

    1990-01-01

    Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

  10. Current State of Agile User-Centered Design: A Survey

    NASA Astrophysics Data System (ADS)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  11. AGILE integration into APC for high mix logic fab

    NASA Astrophysics Data System (ADS)

    Gatefait, M.; Lam, A.; Le Gratiet, B.; Mikolajczak, M.; Morin, V.; Chojnowski, N.; Kocsis, Z.; Smith, I.; Decaunes, J.; Ostrovsky, A.; Monget, C.

    2015-09-01

    mix logic Fab) in term of product and technology portfolio AGILE corrects for up to 120nm of product topography error on process layer with less than 50nm depth of focus Based on tool functionalities delivered by ASML and on high volume manufacturing requirement, AGILE integration is a real challenge. Regarding ST requirements "Automatic AGILE" functionality developed by ASML was not a turnkey solution and a dedicated functionality was needed. A "ST homemade AGILE integration" has been fully developed and implemented within ASML and ST constraints. This paper describes this integration in our Advanced Process Control platform (APC).

  12. Towards a Better Understanding of CMMI and Agile Integration - Multiple Case Study of Four Companies

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna

    The amount of software is increasing in the different domains in Europe. This provides the industries in smaller countries good opportunities to work in the international markets. Success in the global markets however demands the rapid production of high quality, error free software. Both CMMI and agile methods seem to provide a ready solution for quality and lead time improvements. There is not, however, much empirical evidence available either about 1) how the integration of these two aspects can be done in practice or 2) what it actually demands from assessors and software process improvement groups. The goal of this paper is to increase the understanding of CMMI and agile integration, in particular, focusing on the research question: how to use ‘lightweight’ style of CMMI assessments in agile contexts. This is done via four case studies in which assessments were conducted using the goals of CMMI integrated project management and collaboration and coordination with relevant stakeholder process areas and practices from XP and Scrum. The study shows that the use of agile practices may support the fulfilment of the goals of CMMI process areas but there are still many challenges for the agile teams to be solved within the continuous improvement programs. It also identifies practical advices to the assessors and improvement groups to take into consideration when conducting assessment in the context of agile software development.

  13. Towards Agile Ontology Maintenance

    NASA Astrophysics Data System (ADS)

    Luczak-Rösch, Markus

    Ontologies are an appropriate means to represent knowledge on the Web. Research on ontology engineering reached practices for an integrative lifecycle support. However, a broader success of ontologies in Web-based information systems remains unreached while the more lightweight semantic approaches are rather successful. We assume, paired with the emerging trend of services and microservices on the Web, new dynamic scenarios gain momentum in which a shared knowledge base is made available to several dynamically changing services with disparate requirements. Our work envisions a step towards such a dynamic scenario in which an ontology adapts to the requirements of the accessing services and applications as well as the user's needs in an agile way and reduces the experts' involvement in ontology maintenance processes.

  14. Investigating the strategic antecedents of agility in humanitarian logistics.

    PubMed

    L'Hermitte, Cécile; Brooks, Benjamin; Bowles, Marcus; Tatham, Peter H

    2016-12-16

    This study investigates the strategic antecedents of operational agility in humanitarian logistics. It began by identifying the particular actions to be taken at the strategic level of a humanitarian organisation to support field-level agility. Next, quantitative data (n=59) were collected on four strategic-level capabilities (being purposeful, action-focused, collaborative, and learning-oriented) and on operational agility (field responsiveness and flexibility). Using a quantitative analysis, the study tested the relationship between organisational capacity building and operational agility and found that the four strategic-level capabilities are fundamental building blocks of agility. Collectively they account for 52 per cent of the ability of humanitarian logisticians to deal with ongoing changes and disruptions in the field. This study emphasises the need for researchers and practitioners to embrace a broader perspective of agility in humanitarian logistics. In addition, it highlights the inherently strategic nature of agility, the development of which involves focusing simultaneously on multiple drivers.

  15. Prototype of a Graphical CONOPS (Concept of Operations) Development Environment for Agile Systems Engineering

    DTIC Science & Technology

    2012-03-23

    030 March 23, 2012 UNCLASSIFIED  Development languages and physics engines supported Deployment  Client-Server capability  Web , PC, Mac...drawbacks (shown in red). Chief among these was their inability to deploy on the Web . A secondary consideration for this phase of our research task is the...containment) will need a consistent strategy 7. We need to develop an ontological schema similar to semantic webs (such as OWL), and will research this

  16. Agile automated vision

    NASA Astrophysics Data System (ADS)

    Fandrich, Juergen; Schmitt, Lorenz A.

    1994-11-01

    The microelectronic industry is a protagonist in driving automated vision to new paradigms. Today semiconductor manufacturers use vision systems quite frequently in their fabs in the front-end process. In fact, the process depends on reliable image processing systems. In the back-end process, where ICs are assembled and packaged, today vision systems are only partly used. But in the next years automated vision will become compulsory for the back-end process as well. Vision will be fully integrated into every IC package production machine to increase yields and reduce costs. Modem high-speed material processing requires dedicated and efficient concepts in image processing. But the integration of various equipment in a production plant leads to unifying handling of data flow and interfaces. Only agile vision systems can act with these contradictions: fast, reliable, adaptable, scalable and comprehensive. A powerful hardware platform is a unneglectable requirement for the use of advanced and reliable, but unfortunately computing intensive image processing algorithms. The massively parallel SIMD hardware product LANTERN/VME supplies a powerful platform for existing and new functionality. LANTERN/VME is used with a new optical sensor for IC package lead inspection. This is done in 3D, including horizontal and coplanarity inspection. The appropriate software is designed for lead inspection, alignment and control tasks in IC package production and handling equipment, like Trim&Form, Tape&Reel and Pick&Place machines.

  17. Conceptual Design of Targeted Scrum: Applying Mission Command to Agile Software Development

    DTIC Science & Technology

    2014-06-01

    2012). The theory behind Scrum is empiricism . Schwaber and Sutherland (2011) define empiricism as making decisions based on experience and what is...currently known at the time. A critical part of this empiricism is frequent inspections to determine if the process is on track and subsequently making...much like empiricism . Also, the OODA has multiple feedback loops going back to the Observe component that enables the commander to understand changes in

  18. AM-OER: An Agile Method for the Development of Open Educational Resources

    ERIC Educational Resources Information Center

    Arimoto, Maurício M.; Barroca, Leonor; Barbosa, Ellen F.

    2016-01-01

    Open Educational Resources have emerged as important elements of education in the contemporary society, promoting life-long and personalized learning that transcends social, economic and geographical barriers. To achieve the potential of OERs and bring impact on education, it is necessary to increase their development and supply. However, one of…

  19. Decision Science Challenges for C2 Agility

    DTIC Science & Technology

    2014-06-01

    Controlled and automatic human information processing: II. Perceptual learning , automatic attending and a general theory . Psychological Review, 84 (2...1 19 th ICCRTS “C2 Agility: Lessons Learned from Research and Operations” Decision Science Challenges for C2 Agility Topic 1 (First...systems. We have two vectors there. The first vector would be in things like man-machine interface. The second ... is in the whole area of cognition

  20. Design, implementation and validation of a novel open framework for agile development of mobile health applications

    PubMed Central

    2015-01-01

    The delivery of healthcare services has experienced tremendous changes during the last years. Mobile health or mHealth is a key engine of advance in the forefront of this revolution. Although there exists a growing development of mobile health applications, there is a lack of tools specifically devised for their implementation. This work presents mHealthDroid, an open source Android implementation of a mHealth Framework designed to facilitate the rapid and easy development of mHealth and biomedical apps. The framework is particularly planned to leverage the potential of mobile devices such as smartphones or tablets, wearable sensors and portable biomedical systems. These devices are increasingly used for the monitoring and delivery of personal health care and wellbeing. The framework implements several functionalities to support resource and communication abstraction, biomedical data acquisition, health knowledge extraction, persistent data storage, adaptive visualization, system management and value-added services such as intelligent alerts, recommendations and guidelines. An exemplary application is also presented along this work to demonstrate the potential of mHealthDroid. This app is used to investigate on the analysis of human behavior, which is considered to be one of the most prominent areas in mHealth. An accurate activity recognition model is developed and successfully validated in both offline and online conditions. PMID:26329639

  1. Design, implementation and validation of a novel open framework for agile development of mobile health applications.

    PubMed

    Banos, Oresti; Villalonga, Claudia; Garcia, Rafael; Saez, Alejandro; Damas, Miguel; Holgado-Terriza, Juan A; Lee, Sungyong; Pomares, Hector; Rojas, Ignacio

    2015-01-01

    The delivery of healthcare services has experienced tremendous changes during the last years. Mobile health or mHealth is a key engine of advance in the forefront of this revolution. Although there exists a growing development of mobile health applications, there is a lack of tools specifically devised for their implementation. This work presents mHealthDroid, an open source Android implementation of a mHealth Framework designed to facilitate the rapid and easy development of mHealth and biomedical apps. The framework is particularly planned to leverage the potential of mobile devices such as smartphones or tablets, wearable sensors and portable biomedical systems. These devices are increasingly used for the monitoring and delivery of personal health care and wellbeing. The framework implements several functionalities to support resource and communication abstraction, biomedical data acquisition, health knowledge extraction, persistent data storage, adaptive visualization, system management and value-added services such as intelligent alerts, recommendations and guidelines. An exemplary application is also presented along this work to demonstrate the potential of mHealthDroid. This app is used to investigate on the analysis of human behavior, which is considered to be one of the most prominent areas in mHealth. An accurate activity recognition model is developed and successfully validated in both offline and online conditions.

  2. Focused Logistics: Putting Agility in Agile Logistics

    DTIC Science & Technology

    2011-05-19

    envisioned an agile and adaptable logstics system built around common situational understanding.5 The Focused Logistics concept specified the requirement to...the tracking of resources moving through the TD network. As a result, 112 Ibid, 20. 113 Ibid, 18-20. 39 distribution centers tagged inbound

  3. Development of Robust, Light-weight, Agile Deformable Mirrors in Carbon Fiber

    NASA Astrophysics Data System (ADS)

    Hart, M.; Ammons, S. M.; Coughenour, B.; Richardson, L.,; Romeo, R.; Martin, R.

    2012-09-01

    Carbon fiber reinforced polymer (CFRP) has recently been developed to the point that surfaces of high optical quality can be routinely replicated. Building on this advance, we are developing a new generation of deformable mirrors (DMs) for adaptive optics application that extends long-standing expertise at the University of Arizona in large, optically powered DMs for astronomy. Our existing mirrors, up to 90 cm in diameter and with aspheric deformable facesheets, are deployed on a number of large astronomical telescopes. With actuator stroke of up to 50 microns and no hysteresis, they are delivering the best imaging ever seen from an astronomical AO system. Their Zerodur glass ceramic facesheets though are not well suited to non-astronomical applications. In this paper, we describe developmental work to replace the glass components of the DMs with CFRP, an attractive material for optics fabrication because of its high stiffness-to-weight ratio, strength, and very low coefficient of thermal expansion. Surface roughness arising from fiber print-through in the CFRP facesheets is low, < 3 nm PTV across a range of temperature, and the optical figure after correction of static terms by the DM actuators is on the order of 20 nm rms. After initial investment in an optical quality mandrel, replication costs of identical units in CFRP are very low, making the technology ideal for rapid mass production.

  4. Network configuration management : paving the way to network agility.

    SciTech Connect

    Maestas, Joseph H.

    2007-08-01

    Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, and customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.

  5. Agile manufacturing and constraints management: a strategic perspective

    NASA Astrophysics Data System (ADS)

    Stratton, Roy; Yusuf, Yahaya Y.

    2000-10-01

    The definition of the agile paradigm has proved elusive and is often viewed as a panacea, in contention with more traditional approaches to operations strategy development and Larkin its own methodology and tools. The Theory of Constraints (TOC) is also poorly understood, as it is commonly solely associated with production planning and control systems and bottleneck management. This paper will demonstrate the synergy between these two approaches together with the Theory of Inventive Problem Solving (TRIZ), and establish how the systematic elimination of trade-offs can support the agile paradigm. Whereas agility is often seen as a trade-off free destination, both TOC and TRIZ may be considered to be route finders, as they comprise methodologies that focus on the identification and elimination of the trade-offs that constrain the purposeful improvement of a system, be it organizational or mechanical. This paper will also show how the TOC thinking process may be combined with the TRIZ knowledge based approach and used in breaking contradictions within agile logistics.

  6. Integrating a distributed, agile, virtual enterprise in the TEAM program

    NASA Astrophysics Data System (ADS)

    Cobb, C. K.; Gray, W. Harvey; Hewgley, Robert E.; Klages, Edward J.; Neal, Richard E.

    1997-01-01

    The technologies enabling agile manufacturing (TEAM) program enhances industrial capability by advancing and deploying manufacturing technologies that promote agility. TEAM has developed a product realization process that features the integration of product design and manufacturing groups. TEAM uses the tools it collects, develops, and integrates in support of the product realization process to demonstrate and deploy agile manufacturing capabilities for three high- priority processes identified by industry: material removal, forming, and electromechanical assembly. In order to provide a proof-of-principle, the material removal process has been addressed first and has been successfully demonstrate din an 'interconnected' mode. An internet-accessible intersite file manager (IFM) application has been deployed to allow geographically distributed TEAM participants to share and distribute information as the product realization process is executed. An automated inspection planning application has been demonstrated, importing a solid model form the IFM, generating an inspection plan and a part program to be used in the inspection process, and then distributing the part program to the inspection site via the IFM. TEAM seeks to demonstrate the material removal process in an integrated mode in June 1997 complete with an object-oriented framework and infrastructure. The current status and future plans for this project are presented here.

  7. Development and testing of a frequency-agile optical parametric oscillator system for differential absorption lidar

    NASA Astrophysics Data System (ADS)

    Weibring, P.; Smith, J. N.; Edner, H.; Svanberg, S.

    2003-10-01

    An all-solid-state fast-tuning lidar transmitter for range- and temporally resolved atmospheric gas concentration measurements has been developed and thoroughly tested. The instrument is based on a commercial optical parametric oscillator (OPO) laser system, which has been redesigned with piezoelectric transducers mounted on the wavelength-tuning mirror and on the crystal angle tuning element in the OPO. Piezoelectric transducers similarly control a frequency-mixing stage and doubling stage, which have been incorporated to extend system capabilities to the mid-IR and UV regions. The construction allows the system to be tuned to any wavelength, in any order, in the range of the piezoelectric transducers on a shot-to-shot basis. This extends the measurement capabilities far beyond the two-wavelength differential absorption lidar method and enables simultaneous measurements of several gases. The system performance in terms of wavelength, linewidth, and power stability is monitored in real time by an étalon-based wave meter and gas cells. The tests showed that the system was able to produce radiation in the 220-4300-nm-wavelength region, with an average linewidth better than 0.2 cm-1 and a shot-to-shot tunability up to 160 cm-1 within 20 ms. The utility of real-time linewidth and wavelength measurements is demonstrated by the ability to identify occasional poor quality laser shots and disregard these measurements. Also, absorption cell measurements of methane and mercury demonstrate the performance in obtaining stable wavelength and linewidth during rapid scans in the mid-IR and UV regions.

  8. Preparing your Offshore Organization for Agility: Experiences in India

    NASA Astrophysics Data System (ADS)

    Srinivasan, Jayakanth

    Two strategies that have significantly changed the way we conventionally think about managing software development and sustainment are the family of development approaches collectively referred to as agile methods, and the distribution of development efforts on a global scale. When you combine the two strategies, organizations have to address not only the technical challenges that arise from introducing new ways of working, but more importantly have to manage the 'soft' factors that if ignored lead to hard challenges. Using two case studies of distributed agile software development in India we illustrate the areas that organizations need to be aware of when transitioning work to India. The key issues that we emphasize are the need to recruit and retain personnel; the importance of teaching, mentoring and coaching; the need to manage customer expectations; the criticality of well-articulated senior leadership vision and commitment; and the reality of operating in a heterogeneous process environment.

  9. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  10. An Agile Constructionist Mentoring Methodology for Software Projects in the High School

    ERIC Educational Resources Information Center

    Meerbaum-Salant, Orni; Hazzan, Orit

    2010-01-01

    This article describes the construction process and evaluation of the Agile Constructionist Mentoring Methodology (ACMM), a mentoring method for guiding software development projects in the high school. The need for such a methodology has arisen due to the complexity of mentoring software project development in the high school. We introduce the…

  11. Agile robotic edge finishing system research

    SciTech Connect

    Powell, M.A.

    1995-07-01

    This paper describes a new project undertaken by Sandia National Laboratories to develop an agile, automated, high-precision edge finishing system. The project has a two-year duration and was initiated in October, 1994. This project involves re-designing and adding additional capabilities to an existing finishing workcell at Sandia; and developing intelligent methods for automating process definition and for controlling finishing processes. The resulting system will serve as a prototype for systems that will be deployed into highly flexible automated production lines. The production systems will be used to produce a wide variety of products with limited production quantities and quick turnaround requirements. The prototype system is designed to allow programming, process definition, fixture re-configuration, and process verification to be performed off-line for new products. CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) models of the part will be used to assist with the automated process development and process control tasks. To achieve Sandia`s performance goals, the system will be employ advanced path planning, burr prediction expert systems, automated process definition, statistical process models in a process database, and a two-level control scheme using hybrid position-force control and fuzzy logic control. In this paper, we discuss the progress and the planned system development under this project.

  12. Analysis and optimization of preliminary aircraft configurations in relationship to emerging agility metrics

    NASA Technical Reports Server (NTRS)

    Sandlin, Doral R.; Bauer, Brent Alan

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition one study illustrates the module's ability to optimize a configuration's agility performance.

  13. Agile manufacturing in Intelligence, Surveillance and Reconnaissance (ISR)

    NASA Astrophysics Data System (ADS)

    DiPadua, Mark; Dalton, George

    2016-05-01

    The objective of the Agile Manufacturing for Intelligence, Surveillance, and Reconnaissance (AMISR) effort is to research, develop, design and build a prototype multi-intelligence (multi-INT), reconfigurable pod demonstrating benefits of agile manufacturing and a modular open systems approach (MOSA) to make podded intelligence, surveillance, and reconnaissance (ISR) capability more affordable and operationally flexible.

  14. SAR imagery using chaotic carrier frequency agility pulses

    NASA Astrophysics Data System (ADS)

    Xu, Xiaojian; Feng, Xiangzhi

    2011-06-01

    Synthetic aperture radar (SAR) systems are getting more and more applications in both civilian and military remote sensing missions. With the increasing deployment of electronic countermeasures (ECM) on modern battlefields, SAR encounters more and more interference jamming signals. The ECM jamming signals cause the SAR system to receive and process erroneous information which results in severe degradations in the output SAR images and/or formation of phony images of nonexistent targets. As a consequence, development of the electronic counter-countermeasures (ECCM) capability becomes one of the key problems in SAR system design. This paper develops radar signaling strategies and algorithms that enhance the ability of synthetic aperture radar to image targets under conditions of electronic jamming. The concept of SAR using chaotic carrier frequency agility pulses (CCFAP-SAR) is first proposed. Then the imaging procedure for CCFAP-SAR is discussed in detail. The ECCM performance of CCFAP-SAR for both depressive noise jamming and deceptive repeat jamming is analyzed. The impact of the carrier frequency agility range on the image quality of CCFAP-SAR is also studied. Simulation results demonstrate that, with adequate agility range of the carrier frequency, the proposed CCFAP-SAR performs as well as conventional radar with linear frequency modulation (LFM) waveform in image quality and slightly better in anti-noise depressive jamming; while performs very well in anti-deception jamming which cannot be rejected by LFM-SAR.

  15. Fighter agility metrics. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.

    1990-01-01

    Fighter flying qualities and combat capabilities are currently measured and compared in terms relating to vehicle energy, angular rates and sustained acceleration. Criteria based on these measurable quantities have evolved over the past several decades and are routinely used to design aircraft structures, aerodynamics, propulsion and control systems. While these criteria, or metrics, have the advantage of being well understood, easily verified and repeatable during test, they tend to measure the steady state capability of the aircraft and not its ability to transition quickly from one state to another. Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A complete set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available.

  16. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that ``competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.`` Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  17. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.'' Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  18. Production planning tools and techniques for agile manufacturing

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Turnquist, M.A.

    1996-10-01

    Effective use of resources shared among multiple products or processes is critical for agile manufacturing. This paper describes development and implementation of a computerized model to support production planning in a complex manufacturing system at Pantex Plant. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints, and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

  19. Agile manufacturing prototyping system (AMPS)

    SciTech Connect

    Garcia, P.

    1998-05-09

    The Agile Manufacturing Prototyping System (AMPS) is being integrated at Sandia National Laboratories. AMPS consists of state of the industry flexible manufacturing hardware and software enhanced with Sandia advancements in sensor and model based control; automated programming, assembly and task planning; flexible fixturing; and automated reconfiguration technology. AMPS is focused on the agile production of complex electromechanical parts. It currently includes 7 robots (4 Adept One, 2 Adept 505, 1 Staubli RX90), conveyance equipment, and a collection of process equipment to form a flexible production line capable of assembling a wide range of electromechanical products. This system became operational in September 1995. Additional smart manufacturing processes will be integrated in the future. An automated spray cleaning workcell capable of handling alcohol and similar solvents was added in 1996 as well as parts cleaning and encapsulation equipment, automated deburring, and automated vision inspection stations. Plans for 1997 and out years include adding manufacturing processes for the rapid prototyping of electronic components such as soldering, paste dispensing and pick-and-place hardware.

  20. Agile parallel bioinformatics workflow management using Pwrake

    PubMed Central

    2011-01-01

    Background In bioinformatics projects, scientific workflow systems are widely used to manage computational procedures. Full-featured workflow systems have been proposed to fulfil the demand for workflow management. However, such systems tend to be over-weighted for actual bioinformatics practices. We realize that quick deployment of cutting-edge software implementing advanced algorithms and data formats, and continuous adaptation to changes in computational resources and the environment are often prioritized in scientific workflow management. These features have a greater affinity with the agile software development method through iterative development phases after trial and error. Here, we show the application of a scientific workflow system Pwrake to bioinformatics workflows. Pwrake is a parallel workflow extension of Ruby's standard build tool Rake, the flexibility of which has been demonstrated in the astronomy domain. Therefore, we hypothesize that Pwrake also has advantages in actual bioinformatics workflows. Findings We implemented the Pwrake workflows to process next generation sequencing data using the Genomic Analysis Toolkit (GATK) and Dindel. GATK and Dindel workflows are typical examples of sequential and parallel workflows, respectively. We found that in practice, actual scientific workflow development iterates over two phases, the workflow definition phase and the parameter adjustment phase. We introduced separate workflow definitions to help focus on each of the two developmental phases, as well as helper methods to simplify the descriptions. This approach increased iterative development efficiency. Moreover, we implemented combined workflows to demonstrate modularity of the GATK and Dindel workflows. Conclusions Pwrake enables agile management of scientific workflows in the bioinformatics domain. The internal domain specific language design built on Ruby gives the flexibility of rakefiles for writing scientific workflows. Furthermore, readability

  1. The measurement and improvement of the lateral agility of the F-18

    NASA Technical Reports Server (NTRS)

    Eggold, David P.; Valasek, John; Downing, David R.

    1991-01-01

    The effect of vehicle configuration and flight control system performance on the roll agility of a modern fighter aircraft has been investigated. A batch simulation of a generic F-18 Hornet was used to study the roll agility as measured by the time to roll through 90 deg metric. Problems discussed include definition of agility, factors affecting the agility of a vehicle, the development of the time to roll through 90 deg agility metric, and a simulation experiment. It is concluded that the integral of stability or wind axis roll rate should be used as a measure of the roll measure traversed. The time through roll angle 90 deg metric is considered to be a good metric for measuring the transient performance aspect of agility. Roll agility of the F-18, as measured by 90 deg metric, can be improved by 10 to 30 percent. Compatible roll and rudder actuator rates can significantly affect 90 deg agility metric.

  2. An investigation of fighter aircraft agility

    NASA Technical Reports Server (NTRS)

    Valasek, John; Downing, David R.

    1993-01-01

    This report attempts to unify in a single document the results of a series of studies on fighter aircraft agility funded by the NASA Ames Research Center, Dryden Flight Research Facility and conducted at the University of Kansas Flight Research Laboratory during the period January 1989 through December 1993. New metrics proposed by pilots and the research community to assess fighter aircraft agility are collected and analyzed. The report develops a framework for understanding the context into which the various proposed fighter agility metrics fit in terms of application and testing. Since new metrics continue to be proposed, this report does not claim to contain every proposed fighter agility metric. Flight test procedures, test constraints, and related criteria are developed. Instrumentation required to quantify agility via flight test is considered, as is the sensitivity of the candidate metrics to deviations from nominal pilot command inputs, which is studied in detail. Instead of supplying specific, detailed conclusions about the relevance or utility of one candidate metric versus another, the authors have attempted to provide sufficient data and analyses for readers to formulate their own conclusions. Readers are therefore ultimately responsible for judging exactly which metrics are 'best' for their particular needs. Additionally, it is not the intent of the authors to suggest combat tactics or other actual operational uses of the results and data in this report. This has been left up to the user community. Twenty of the candidate agility metrics were selected for evaluation with high fidelity, nonlinear, non real-time flight simulation computer programs of the F-5A Freedom Fighter, F-16A Fighting Falcon, F-18A Hornet, and X-29A. The information and data presented on the 20 candidate metrics which were evaluated will assist interested readers in conducting their own extensive investigations. The report provides a definition and analysis of each metric; details

  3. Perspectives on Agile Coaching

    NASA Astrophysics Data System (ADS)

    Fraser, Steven; Lundh, Erik; Davies, Rachel; Eckstein, Jutta; Larsen, Diana; Vilkki, Kati

    There are many perspectives to agile coaching including: growing coaching expertise, selecting the appropriate coach for your context; and eva luating value. A coach is often an itinerant who may observe, mentor, negotiate, influence, lead, and/or architect everything from team organization to system architecture. With roots in diverse fields ranging from technology to sociology coaches have differing motivations and experience bases. This panel will bring together coaches to debate and discuss various perspectives on agile coaching. Some of the questions to be addressed will include: What are the skills required for effective coaching? What should be the expectations for teams or individu als being coached? Should coaches be: a corporate resource (internal team of consultants working with multiple internal teams); an integral part of a specific team; or external contractors? How should coaches exercise influence and au thority? How should management assess the value of a coaching engagement? Do you have what it takes to be a coach? - This panel will bring together sea soned agile coaches to offer their experience and advice on how to be the best you can be!

  4. Operational Agility (La Maniabilite Operationnelle)

    DTIC Science & Technology

    1994-04-01

    describe how to go further and how to set up an analytical framework for the analysis of another fundamental property of modern combat aircraft, that is... analytical framework for the analysis of airframe agility and for the derivation of agility metrics. A general consensus has been found in relating agility...Gianchecchi, Aernmacchi Lt Col. G. Fristachi, Italian Air Force Prof. M. Innocenti, Auburn University/University of Pisa United Kingdom Mr P. Gordon

  5. Architectural Tactics to Support Rapid and Agile Stability

    DTIC Science & Technology

    2012-05-01

    20 CrossTalk—May/June 2012 RAPID AND AGILE STABILITY • Scrum teams, product development teams, component teams, or feature teams spend almost...and individuals in the roles of Scrum master, developer, project manager, and architect on projects from organizations that develop embedded real...agile stability. Using Scrum , 25 teams participated in the develop- ment effort. Some of the teams were colocated; teams (waste), while not evolving

  6. Agile dry etching of compound semiconductors for science-based manufacturing using in-situ process control

    SciTech Connect

    ASHBY,CAROL I.; VAWTER,GREGORY A.; BREILAND,WILLIAM G.; BRUSKAS,LARRY A.; WOODWORTH,JOSEPH R.; HEBNER,GREGORY A.

    2000-02-01

    In-situ optical diagnostics and ion beam diagnostics for plasma-etch and reactive-ion-beam etch (RIBE) tools have been developed and implemented on etch tools in the Compound Semiconductor Research Laboratory (CSRL). The optical diagnostics provide real-time end-point detection during plasma etching of complex thin-film layered structures that require precision etching to stop on a particular layer in the structure. The Monoetch real-time display and analysis program developed with this LDRD displays raw and filtered reflectance signals that enable an etch system operator to stop an etch at the desired depth within the desired layer. The ion beam diagnostics developed with this LDRD will permit routine analysis of critical ion-beam profile characteristics that determine etch uniformity and reproducibility on the RIBE tool.

  7. Powder towpreg process development

    NASA Technical Reports Server (NTRS)

    Baucom, Robert M.; Marchello, Joseph M.

    1991-01-01

    The process for dry powder impregnation of carbon fiber tows being developed at LaRC overcomes many of the difficulties associated with melt, solution, and slurry prepregging. In the process, fluidized powder is deposited on spread tow bundles and fused to the fibers by radiant heating. Impregnated tows have been produced for preform, weaving, and composite materials applications. Design and operating data correlations were developed for scale up of the process to commercial operation. Bench scale single tow experiments at tow speeds up to 50 cm/sec have demonstrated that the process can be controlled to produce weavable towpreg. Samples were woven and molded into preform material of good quality.

  8. Moving target detection for frequency agility radar by sparse reconstruction.

    PubMed

    Quan, Yinghui; Li, YaChao; Wu, Yaojun; Ran, Lei; Xing, Mengdao; Liu, Mengqi

    2016-09-01

    Frequency agility radar, with randomly varied carrier frequency from pulse to pulse, exhibits superior performance compared to the conventional fixed carrier frequency pulse-Doppler radar against the electromagnetic interference. A novel moving target detection (MTD) method is proposed for the estimation of the target's velocity of frequency agility radar based on pulses within a coherent processing interval by using sparse reconstruction. Hardware implementation of orthogonal matching pursuit algorithm is executed on Xilinx Virtex-7 Field Programmable Gata Array (FPGA) to perform sparse optimization. Finally, a series of experiments are performed to evaluate the performance of proposed MTD method for frequency agility radar systems.

  9. Moving target detection for frequency agility radar by sparse reconstruction

    NASA Astrophysics Data System (ADS)

    Quan, Yinghui; Li, YaChao; Wu, Yaojun; Ran, Lei; Xing, Mengdao; Liu, Mengqi

    2016-09-01

    Frequency agility radar, with randomly varied carrier frequency from pulse to pulse, exhibits superior performance compared to the conventional fixed carrier frequency pulse-Doppler radar against the electromagnetic interference. A novel moving target detection (MTD) method is proposed for the estimation of the target's velocity of frequency agility radar based on pulses within a coherent processing interval by using sparse reconstruction. Hardware implementation of orthogonal matching pursuit algorithm is executed on Xilinx Virtex-7 Field Programmable Gata Array (FPGA) to perform sparse optimization. Finally, a series of experiments are performed to evaluate the performance of proposed MTD method for frequency agility radar systems.

  10. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  11. Agile Infrastructure Monitoring

    NASA Astrophysics Data System (ADS)

    Andrade, P.; Ascenso, J.; Fedorko, I.; Fiorini, B.; Paladin, M.; Pigueiras, L.; Santos, M.

    2014-06-01

    At the present time, data centres are facing a massive rise in virtualisation and cloud computing. The Agile Infrastructure (AI) project is working to deliver new solutions to ease the management of CERN data centres. Part of the solution consists in a new "shared monitoring architecture" which collects and manages monitoring data from all data centre resources. In this article, we present the building blocks of this new monitoring architecture, the different open source technologies selected for each architecture layer, and how we are building a community around this common effort.

  12. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, Stephan P.

    1998-01-01

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy.

  13. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  14. Agile rediscovering values: Similarities to continuous improvement strategies

    NASA Astrophysics Data System (ADS)

    Díaz de Mera, P.; Arenas, J. M.; González, C.

    2012-04-01

    Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

  15. PDS4 - Some Principles for Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Algermissen, S.; Padams, J.

    2015-12-01

    PDS4, a research data management and curation system for NASA's Planetary Science Archive, was developed using principles that promote the characteristics of agile development. The result is an efficient system that produces better research data products while using less resources (time, effort, and money) and maximizes their usefulness for current and future scientists. The key principle is architectural. The PDS4 information architecture is developed and maintained independent of the infrastructure's process, application and technology architectures. The information architecture is based on an ontology-based information model developed to leverage best practices from standard reference models for digital archives, digital object registries, and metadata registries and capture domain knowledge from a panel of planetary science domain experts. The information model provides a sharable, stable, and formal set of information requirements for the system and is the primary source for information to configure most system components, including the product registry, search engine, validation and display tools, and production pipelines. Multi-level governance is also allowed for the effective management of the informational elements at the common, discipline, and project level. This presentation will describe the development principles, components, and uses of the information model and how an information model-driven architecture exhibits characteristics of agile curation including early delivery, evolutionary development, adaptive planning, continuous improvement, and rapid and flexible response to change.

  16. Parallel optimization methods for agile manufacturing

    SciTech Connect

    Meza, J.C.; Moen, C.D.; Plantenga, T.D.; Spence, P.A.; Tong, C.H.; Hendrickson, B.A.; Leland, R.W.; Reese, G.M.

    1997-08-01

    The rapid and optimal design of new goods is essential for meeting national objectives in advanced manufacturing. Currently almost all manufacturing procedures involve the determination of some optimal design parameters. This process is iterative in nature and because it is usually done manually it can be expensive and time consuming. This report describes the results of an LDRD, the goal of which was to develop optimization algorithms and software tools that will enable automated design thereby allowing for agile manufacturing. Although the design processes vary across industries, many of the mathematical characteristics of the problems are the same, including large-scale, noisy, and non-differentiable functions with nonlinear constraints. This report describes the development of a common set of optimization tools using object-oriented programming techniques that can be applied to these types of problems. The authors give examples of several applications that are representative of design problems including an inverse scattering problem, a vibration isolation problem, a system identification problem for the correlation of finite element models with test data and the control of a chemical vapor deposition reactor furnace. Because the function evaluations are computationally expensive, they emphasize algorithms that can be adapted to parallel computers.

  17. Delaying Mobility Disability in People With Parkinson Disease Using a Sensorimotor Agility Exercise Program

    PubMed Central

    King, Laurie A; Horak, Fay B

    2009-01-01

    This article introduces a new framework for therapists to develop an exercise program to delay mobility disability in people with Parkinson disease (PD). Mobility, or the ability to efficiently navigate and function in a variety of environments, requires balance, agility, and flexibility, all of which are affected by PD. This article summarizes recent research identifying how constraints on mobility specific to PD, such as rigidity, bradykinesia, freezing, poor sensory integration, inflexible program selection, and impaired cognitive processing, limit mobility in people with PD. Based on these constraints, a conceptual framework for exercises to maintain and improve mobility is presented. An example of a constraint-focused agility exercise program, incorporating movement principles from tai chi, kayaking, boxing, lunges, agility training, and Pilates exercises, is presented. This new constraint-focused agility exercise program is based on a strong scientific framework and includes progressive levels of sensorimotor, resistance, and coordination challenges that can be customized for each patient while maintaining fidelity. Principles for improving mobility presented here can be incorporated into an ongoing or long-term exercise program for people with PD. PMID:19228832

  18. Delaying mobility disability in people with Parkinson disease using a sensorimotor agility exercise program.

    PubMed

    King, Laurie A; Horak, Fay B

    2009-04-01

    This article introduces a new framework for therapists to develop an exercise program to delay mobility disability in people with Parkinson disease (PD). Mobility, or the ability to efficiently navigate and function in a variety of environments, requires balance, agility, and flexibility, all of which are affected by PD. This article summarizes recent research identifying how constraints on mobility specific to PD, such as rigidity, bradykinesia, freezing, poor sensory integration, inflexible program selection, and impaired cognitive processing, limit mobility in people with PD. Based on these constraints, a conceptual framework for exercises to maintain and improve mobility is presented. An example of a constraint-focused agility exercise program, incorporating movement principles from tai chi, kayaking, boxing, lunges, agility training, and Pilates exercises, is presented. This new constraint-focused agility exercise program is based on a strong scientific framework and includes progressive levels of sensorimotor, resistance, and coordination challenges that can be customized for each patient while maintaining fidelity. Principles for improving mobility presented here can be incorporated into an ongoing or long-term exercise program for people with PD.

  19. Supply chain network design problem for a new market opportunity in an agile manufacturing system

    NASA Astrophysics Data System (ADS)

    Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza

    2012-08-01

    The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.

  20. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  1. Aircraft agility maneuvers

    NASA Technical Reports Server (NTRS)

    Cliff, Eugene M.; Thompson, Brian G.

    1992-01-01

    A new dynamic model for aircraft motions is presented. This model can be viewed as intermediate between a point-mass model, in which the body attitude angles are control-like, and a rigid-body model, in which the body-attitude angles evolve according to Newton's Laws. Specifically, consideration is given to the case of symmetric flight, and a model is constructed in which the body roll-rate and the body pitch-rate are the controls. In terms of this body-rate model a minimum-time heading change maneuver is formulated. When the bounds on the body-rates are large the results are similar to the point-mass model in that the model can very quickly change the applied forces and produce an acceleration to turn the vehicle. With finite bounds on these rates, the forces change in a smooth way. This leads to a measurable effect of agility.

  2. A review of the Technologies Enabling Agile Manufacturing program

    SciTech Connect

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  3. Elements of an Art - Agile Coaching

    NASA Astrophysics Data System (ADS)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  4. Value Creation by Agile Projects: Methodology or Mystery?

    NASA Astrophysics Data System (ADS)

    Racheva, Zornitza; Daneva, Maya; Sikkel, Klaas

    Business value is a key concept in agile software development approaches. This paper presents results of a systematic review of literature on how business value is created by agile projects. We found that with very few exceptions, most published studies take the concept of business value for granted and do not state what it means in general as well as in the specific study context. We could find no study which clearly indicates how exactly individual agile practices or groups of those create value and keep accumulating it over time. The key implication for research is that we have an incentive to pursue the study of value creation in agile project by deploying empirical research methods.

  5. Investigation into the impact of agility on conceptual fighter design

    NASA Technical Reports Server (NTRS)

    Engelbeck, R. M.

    1995-01-01

    The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

  6. SLS Flight Software Testing: Using a Modified Agile Software Testing Approach

    NASA Technical Reports Server (NTRS)

    Bolton, Albanie T.

    2016-01-01

    NASA's Space Launch System (SLS) is an advanced launch vehicle for a new era of exploration beyond earth's orbit (BEO). The world's most powerful rocket, SLS, will launch crews of up to four astronauts in the agency's Orion spacecraft on missions to explore multiple deep-space destinations. Boeing is developing the SLS core stage, including the avionics that will control vehicle during flight. The core stage will be built at NASA's Michoud Assembly Facility (MAF) in New Orleans, LA using state-of-the-art manufacturing equipment. At the same time, the rocket's avionics computer software is being developed here at Marshall Space Flight Center in Huntsville, AL. At Marshall, the Flight and Ground Software division provides comprehensive engineering expertise for development of flight and ground software. Within that division, the Software Systems Engineering Branch's test and verification (T&V) team uses an agile test approach in testing and verification of software. The agile software test method opens the door for regular short sprint release cycles. The idea or basic premise behind the concept of agile software development and testing is that it is iterative and developed incrementally. Agile testing has an iterative development methodology where requirements and solutions evolve through collaboration between cross-functional teams. With testing and development done incrementally, this allows for increased features and enhanced value for releases. This value can be seen throughout the T&V team processes that are documented in various work instructions within the branch. The T&V team produces procedural test results at a higher rate, resolves issues found in software with designers at an earlier stage versus at a later release, and team members gain increased knowledge of the system architecture by interfacing with designers. SLS Flight Software teams want to continue uncovering better ways of developing software in an efficient and project beneficial manner

  7. Reliability of a Field Test of Defending and Attacking Agility in Australian Football and Relationships to Reactive Strength.

    PubMed

    Young, Warren B; Murray, Mitch P

    2017-02-01

    Young, WB and Murray, MP. Reliability of a field test of defending and attacking agility in Australian football and relationships to reactive strength. J Strength Cond Res 31(2): 509-516, 2017-Defending and attacking agility tests for Australian football do not exist, and it is unknown whether any physical qualities correlate with these types of agility. The purposes of this study were to develop new field tests of defending and attacking agility for Australian Rules football, to determine whether they were reliable, and to describe the relationship between the agility tests to determine their specificity. Because the reactive strength (RS) of the lower limb muscles has been previously correlated with change-of-direction speed, we also investigated the relationship between this quality and the agility tests. Nineteen male competitive recreational-level Australian Rules football players were assessed on the agility tests and a drop jump test to assess RS. Interday and interrater reliability was also assessed. The agility tests involved performing 10 trials of one-on-one agility tasks against 2 testers (opponents), in which the objective was to be in a position to tackle (defending) or to evade (attacking) the opponent. Both agility tests had good reliability (intraclass correlation > 0.8, %CV < 3, and no significant differences between test occasions [p > 0.05], and interrater reliability was very high [r = 0.997, p < 0.001]). The common variance between the agility tests was 45%, indicating that they represented relatively independent skills. There was a large correlation between RS and defending agility (r = 0.625, p = 0.004), and a very large correlation with attacking agility (r = 0.731, p < 0.001). Defending and attacking agility have different characteristics, possibly related to the footwork, physical, and cognitive demands of each. Nonetheless, RS seems to be important for agility, especially for attacking agility.

  8. Agile Development of Various Computational Power Adaptive Web-Based Mobile-Learning Software Using Mobile Cloud Computing

    ERIC Educational Resources Information Center

    Zadahmad, Manouchehr; Yousefzadehfard, Parisa

    2016-01-01

    Mobile Cloud Computing (MCC) aims to improve all mobile applications such as m-learning systems. This study presents an innovative method to use web technology and software engineering's best practices to provide m-learning functionalities hosted in a MCC-learning system as service. Components hosted by MCC are used to empower developers to create…

  9. TMT approach to observatory software development process

    NASA Astrophysics Data System (ADS)

    Buur, Hanne; Subramaniam, Annapurni; Gillies, Kim; Dumas, Christophe; Bhatia, Ravinder

    2016-07-01

    effective communications; adopting an agile-based software development process across the observatory to enable frequent software releases to help mitigate subsystem interdependencies; defining concise scope and work packages for each of the OSW subsystems to facilitate effective outsourcing of software deliverables to the ITCC partner, and to enable performance monitoring and risk management. At this stage, the architecture and high-level design of the software system has been established and reviewed. During construction each subsystem will have a final design phase with reviews, followed by implementation and testing. The results of the TMT approach to the Observatory Software development process will only be preliminary at the time of the submittal of this paper, but it is anticipated that the early results will be a favorable indication of progress.

  10. What Does an Agile Coach Do?

    NASA Astrophysics Data System (ADS)

    Davies, Rachel; Pullicino, James

    The surge in Agile adoption has created a demand for project managers rather than direct their teams. A sign of this trend is the ever-increasing number of people getting certified as scrum masters and agile leaders. Training courses that introduce agile practices are easy to find. But making the transition to coach is not as simple as understanding what agile practices are. Your challenge as an Agile Coach is to support your team in learning how to wield their new Agile tools in creating great software.

  11. Embedding Agile Practices within a Plan-Driven Hierarchical Project Life Cycle

    SciTech Connect

    Millard, W. David; Johnson, Daniel M.; Henderson, John M.; Lombardo, Nicholas J.; Bass, Robert B.; Smith, Jason E.

    2014-07-28

    Organizations use structured, plan-driven approaches to provide continuity, direction, and control to large, multi-year programs. Projects within these programs vary greatly in size, complexity, level of maturity, technical risk, and clarity of the development objectives. Organizations that perform exploratory research, evolutionary development, and other R&D activities can obtain the benefits of Agile practices without losing the benefits of their program’s overarching plan-driven structure. This paper describes application of Agile development methods on a large plan-driven sensor integration program. While the client employed plan-driven, requirements flow-down methodologies, tight project schedules and complex interfaces called for frequent end-to-end demonstrations to provide feedback during system development. The development process maintained the many benefits of plan-driven project execution with the rapid prototyping, integration, demonstration, and client feedback possible through Agile development methods. This paper also describes some of the tools and implementing mechanisms used to transition between and take advantage of each methodology, and presents lessons learned from the project management, system engineering, and developer’s perspectives.

  12. Software ``Best'' Practices: Agile Deconstructed

    NASA Astrophysics Data System (ADS)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  13. AGILE: Technologies and Electronics for gamma-ray and GRB detection

    NASA Astrophysics Data System (ADS)

    Bonati, A.; Monzani, F.; Poulsen, J. M.; Azzano, M.; Nicolini, L.; Massa, P.; Tavani, M.; Feroci, M.; Barbiellini, G.; Prest, M.; Argan, A.; Perotti, F.; Froysland, T.; Labanti, C.

    2004-06-01

    Following the success of the Beppo-SAX mission, a new family of single payloads for GRB observations are in the development phase. These payloads are characterized by a combination of instruments that provide a wide field-of-view and accurate pointing capability, as well as on-board triggers and source position identification. AGILE is a scientific space mission dedicated to gamma-ray astrophysics. The AGILE payload is based on the instrument concept outlined above, and it combines gamma-ray imaging detectors, and an X-ray imaging detector. Fast triggers and short detectors dead time allow detection of GRB pulses of time-scales from 1 millisecond to several tens of seconds. The AGILE Small Mission is funded by the Italian Space Agency (ASI), and the instruments are developed in collaboration among Italian research institutes and Italian space industry. Laben S.p.A. (a FINMECCANICA company) designs and develops one of the detectors and most of the Payload electronics. This paper gives an overview of the implementation features of some detectors and on-board processing electronics with a view to burst detection and processing.

  14. Agile Development of Advanced Prototypes

    DTIC Science & Technology

    2012-11-01

    sound experience that emphasizes the progression of cochlear implant technology. A guest observes and listens to a virtual environment. They are able to...transition their environment through history as well as the simulated fidelity of a contemporary cochlear implant . A visual experience that...patient with a cochlear implant was interviewed. Outcomes of this research guided the design of the first prototype. The technical design was

  15. The agile alert system for gamma-ray transients

    SciTech Connect

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Fioretti, V.; Chen, A. W.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Pellizzoni, A.; and others

    2014-01-20

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  16. The AGILE Alert System for Gamma-Ray Transients

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Parmiggiani, N.; Fioretti, V.; Chen, A. W.; Vercellone, S.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Beneventano, D.; Argan, A.; Trois, A.; Scalise, E.; Longo, F.; Pellizzoni, A.; Pucella, G.; Colafrancesco, S.; Conforti, V.; Tempesta, P.; Cerone, M.; Sabatini, P.; Annoni, G.; Valentini, G.; Salotti, L.

    2014-01-01

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  17. Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Lenhardt, W. C.; Parsons, M. A.; Benedict, K. K.

    2014-12-01

    The data life cycle has figured prominently in describing the context of digital scientific data stewardship and cyberinfractructure in support of science. There are many different versions of the data life cycle, but they all follow a similar basic pattern: plan, collect, ingest, asses, preserve, discover, and reuse. The process is often interpreted in a fairly linear fashion despite it being a cycle conceptually. More recently at GeoData 2014 and elsewhere, questions have been raised about the utility of the data life cycle as it is currently represented. We are proposing to the community a re-examination of the data life cycle using an agile lens. Our goal is not to deploy agile methods, but to use agile principles as a heuristic to think about how to incorporate data stewardship across the scientific process from proposal stage to research and beyond. We will present alternative conceptualizations of the data life cycle with a goal to solicit feedback and to develop a new model for conceiving and describing the overall data stewardship process. We seek to re-examine past assumptions and shed new light on the challenges and necessity of data stewardship. The ultimate goal is to support new science through enhanced data interoperability, usability, and preservation.

  18. An Innovative Approach to Lower the Risk of Software Intensive Development Programs

    DTIC Science & Technology

    2012-04-30

    There are several agile methodologies and each has advantages that are dependent on the type of capability being developed. The scrum agile method is...constrained iterative approach. It also encourages rapid and flexible response to change. Scrum is an agile methodology used as an example that provides...capabilities. Key components of the scrum process include the following:  Prior to each sprint customer meeting, a prioritized list of capabilities

  19. Project-Method Fit: Exploring Factors That Influence Agile Method Use

    ERIC Educational Resources Information Center

    Young, Diana K.

    2013-01-01

    While the productivity and quality implications of agile software development methods (SDMs) have been demonstrated, research concerning the project contexts where their use is most appropriate has yielded less definitive results. Most experts agree that agile SDMs are not suited for all project contexts. Several project and team factors have been…

  20. Business Development Process

    DTIC Science & Technology

    2001-10-31

    entity’s real estate situation and condition for use by 17 customers including (but not limited to) the business entity. 18 Information is processed to...the score to provide a well- 3 rounded picture of a particular real estate situation. 4 Stratmann discloses a method for assisting an individual in...identify a potential 9 flaw in the opportunity analysis . These criteria include whether 10 the process is dealing with a real customer, if it is

  1. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Skutch, M. E.; Driggers, J. M.; Hopkins, R. H.

    1981-01-01

    The silicon web process takes advantage of natural crystallographic stabilizing forces to grow long, thin single crystal ribbons directly from liquid silicon. The ribbon, or web, is formed by the solidification of a liquid film supported by surface tension between two silicon filaments, called dendrites, which border the edges of the growing strip. The ribbon can be propagated indefinitely by replenishing the liquid silicon as it is transformed to crystal. The dendritic web process has several advantages for achieving low cost, high efficiency solar cells. These advantages are discussed.

  2. SU-E-T-610: Comparison of Treatment Times Between the MLCi and Agility Multileaf Collimators

    SciTech Connect

    Ramsey, C; Bowling, J

    2014-06-01

    Purpose: The Agility is a new 160-leaf MLC developed by Elekta for use in their Infinity and Versa HD linacs. As compared to the MLCi, the Agility increased the maximum leaf speed from 2 cm/s to 3.5 cm/s, and the maximum primary collimator speed from 1.5 cm/s to 9.0 cm/s. The purpose of this study was to determine if the Agility MLC resulted in improved plan quality and/or shorter treatment times. Methods: An Elekta Infinity that was originally equipped with a 80 leaf MLCi was upgraded to an 160 leaf Agility. Treatment plan quality was evaluated using the Pinnacle planning system with SmartArc. Optimization was performed once for the MLCi and once for the Agility beam models using the same optimization parameters and the same number of iterations. Patient treatment times were measured for all IMRT, VMAT, and SBRT patients treated on the Infinity with the MLCi and Agility MLCs. Treatment times were extracted from the EMR and measured from when the patient first walked into the treatment room until exiting the treatment room. Results: 11,380 delivery times were measured for patients treated with the MLCi, and 1,827 measurements have been made for the Agility MLC. The average treatment times were 19.1 minutes for the MLCi and 20.8 minutes for the Agility. Using a t-test analysis, there was no difference between the two groups (t = 0.22). The dose differences between patients planned with the MLCi and the Agility MLC were minimal. For example, the dose difference for the PTV, GTV, and cord for a head and neck patient planned using Pinnacle were effectively equivalent. However, the dose to the parotid glands was slightly worse with the Agility MLC. Conclusion: There was no statistical difference in treatment time, or any significant dosimetric difference between the Agility MLC and the MLCi.

  3. Impact of agile methodologies on team capacity in automotive radio-navigation projects

    NASA Astrophysics Data System (ADS)

    Prostean, G.; Hutanu, A.; Volker, S.

    2017-01-01

    The development processes used in automotive radio-navigation projects are constantly under adaption pressure. While the software development models are based on automotive production processes, the integration of peripheral components into an automotive system will trigger a high number of requirement modifications. The use of traditional development models in automotive industry will bring team’s development capacity to its boundaries. The root cause lays in the inflexibility of actual processes and their adaption limits. This paper addresses a new project management approach for the development of radio-navigation projects. The understanding of weaknesses of current used models helped us in development and integration of agile methodologies in traditional development model structure. In the first part we focus on the change management methods to reduce request for change inflow. Established change management risk analysis processes enables the project management to judge the impact of a requirement change and also gives time to the project to implement some changes. However, in big automotive radio-navigation projects the saved time is not enough to implement the large amount of changes, which are submitted to the project. In the second phase of this paper we focus on increasing team capacity by integrating at critical project phases agile methodologies into the used traditional model. The overall objective of this paper is to prove the need of process adaption in order to solve project team capacity bottlenecks.

  4. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Blais, P. D.; Davis, J. R., Jr.

    1977-01-01

    Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities.

  5. Silicon Web Process Development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Hopkins, R. H.; Mchugh, J. P.; Hill, F. E.; Heimlich, M. E.; Driggers, J. M.

    1978-01-01

    Progress in the development of techniques to grow silicon web at 25 wq cm/min output rate is reported. Feasibility of web growth with simultaneous melt replenishment is discussed. Other factors covered include: (1) tests of aftertrimmers to improve web width; (2) evaluation of growth lid designs to raise speed and output rate; (3) tests of melt replenishment hardware; and (4) investigation of directed gas flow systems to control unwanted oxide deposition in the system and to improve convective cooling of the web. Compatibility with sufficient solar cell performance is emphasized.

  6. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hill, F. E.; Skutch, M. E.; Driggers, J. M.; Hopkins, R. H.

    1980-01-01

    A barrier crucible design which consistently maintains melt stability over long periods of time was successfully tested and used in long growth runs. The pellet feeder for melt replenishment was operated continuously for growth runs of up to 17 hours. The liquid level sensor comprising a laser/sensor system was operated, performed well, and meets the requirements for maintaining liquid level height during growth and melt replenishment. An automated feedback loop connecting the feed mechanism and the liquid level sensing system was designed and constructed and operated successfully for 3.5 hours demonstrating the feasibility of semi-automated dendritic web growth. The sensitivity of the cost of sheet, to variations in capital equipment cost and recycling dendrites was calculated and it was shown that these factors have relatively little impact on sheet cost. Dendrites from web which had gone all the way through the solar cell fabrication process, when melted and grown into web, produce crystals which show no degradation in cell efficiency. Material quality remains high and cells made from web grown at the start, during, and the end of a run from a replenished melt show comparable efficiencies.

  7. Agile hardware and software systems engineering for critical military space applications

    NASA Astrophysics Data System (ADS)

    Huang, Philip M.; Knuth, Andrew A.; Krueger, Robert O.; Garrison-Darrin, Margaret A.

    2012-06-01

    The Multi Mission Bus Demonstrator (MBD) is a successful demonstration of agile program management and system engineering in a high risk technology application where utilizing and implementing new, untraditional development strategies were necessary. MBD produced two fully functioning spacecraft for a military/DOD application in a record breaking time frame and at dramatically reduced costs. This paper discloses the adaptation and application of concepts developed in agile software engineering to hardware product and system development for critical military applications. This challenging spacecraft did not use existing key technology (heritage hardware) and created a large paradigm shift from traditional spacecraft development. The insertion of new technologies and methods in space hardware has long been a problem due to long build times, the desire to use heritage hardware, and lack of effective process. The role of momentum in the innovative process can be exploited to tackle ongoing technology disruptions and allowing risk interactions to be mitigated in a disciplined manner. Examples of how these concepts were used during the MBD program will be delineated. Maintaining project momentum was essential to assess the constant non recurring technological challenges which needed to be retired rapidly from the engineering risk liens. Development never slowed due to tactical assessment of the hardware with the adoption of the SCRUM technique. We adapted this concept as a representation of mitigation of technical risk while allowing for design freeze later in the program's development cycle. By using Agile Systems Engineering and Management techniques which enabled decisive action, the product development momentum effectively was used to produce two novel space vehicles in a fraction of time with dramatically reduced cost.

  8. Command and Control (C2) Agility (Agilite du commandement et du controle (C2))

    DTIC Science & Technology

    2014-10-01

    N2C2M2, C2 Agility Conceptual Model, Agility metrics, and an associated measurement process . Based on experiments designed and conducted using the...be tested than it would be otherwise. It should be noted that a meta-analysis of multiple experiments must adhere to the same design process ... process . One approach was to identify theories and definitions that reflected the concepts underlying a variable. For instance, there is an important

  9. Barriers to Achieving Mentally Agile Junior Leaders

    DTIC Science & Technology

    2009-01-21

    To help answer this question, this paper will describe the operational environment the agile leader must be prepared to operate within and the...senior leadership identified their need over eight years ago? To help answer this question, this paper will describe the operational environment the agile...to the reader. BARRIERS TO ACHIEVING MENTALLY AGILE JUNIOR LEADERS Persistent conflict and change characterize the strategic environment . We have

  10. Towards a Comparative Measure of Legged Agility

    DTIC Science & Technology

    2014-06-01

    so for this paper we explore the implications of a well-cited definition within the sports science community holding that agility is “a rapid whole...systems will have negligible agility according to our metric in accor- dance with biological observations that these motions require significantly less...W. Young, “Agility literature review: Classifications, training and testing,” Journal of sports sciences, vol. 24, no. 9, pp. 919–932, 2006. 19. D. L

  11. On the Biomimetic Design of Agile-Robot Legs

    PubMed Central

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented. PMID:22247667

  12. On the biomimetic design of agile-robot legs.

    PubMed

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented.

  13. Developing the JPL Engineering Processes

    NASA Technical Reports Server (NTRS)

    Linick, Dave; Briggs, Clark

    2004-01-01

    This paper briefly recounts the recent history of process reengineering at the NASA Jet Propulsion Laboratory, with a focus on the engineering processes. The JPL process structure is described and the process development activities of the past several years outlined. The main focus of the paper is on the current process structure, the emphasis on the flight project life cycle, the governance approach that lead to Flight Project Practices, and the remaining effort to capture process knowledge at the detail level of the work group.

  14. Agile robotic edge finishing

    SciTech Connect

    Powell, M.

    1996-08-01

    Edge finishing processes have seemed like ideal candidates for automation. Most edge finishing processes are unpleasant, dangerous, tedious, expensive, not repeatable and labor intensive. Estimates place the cost of manual edge finishing processes at 12% of the total cost of fabricating precision parts. For small, high precision parts, the cost of hand finishing may be as high as 305 of the total part cost. Up to 50% of this cost could be saved through automation. This cost estimate includes the direct costs of edge finishing: the machining hours required and the 30% scrap and rework rate after manual finishing. Not included in these estimates are the indirect costs resulting from cumulative trauma disorders and retraining costs caused by the high turnover rate for finishing jobs.. Despite the apparent economic advantages, edge finishing has proven difficult to automate except in low precision and/or high volume production environments. Finishing automation systems have not been deployed successfully in Department of Energy defense programs (DOE/DP) production, A few systems have been attempted but have been subsequently abandoned for traditional edge finishing approaches: scraping, grinding, and filing the edges using modified dental tools and hand held power tools. Edge finishing automation has been an elusive but potentially lucrative production enhancement. The amount of time required for reconfiguring workcells for new parts, the time required to reprogram the workcells to finish new parts, and automation equipment to respond to fixturing errors and part tolerances are the most common reasons cited for eliminating automation as an option for DOE/DP edge finishing applications. Existing automated finishing systems have proven to be economically viable only where setup and reprogramming costs are a negligible fraction of overall production costs.

  15. Tailoring Agility: Promiscuous Pair Story Authoring and Value Calculation

    NASA Astrophysics Data System (ADS)

    Tendon, Steve

    This chapter describes how a multi-national software organization created a business plan involving business units from eight countries that followed an agile way, after two previously failed attempts with traditional approaches. The case is told by the consultant who initiated implementation of agility into requirements gathering, estimation and planning processes in an international setting. The agile approach was inspired by XP, but then tailored to meet the peculiar requirements. Two innovations were critical. The first innovation was promiscuous pair story authoring, where user stories were written by two people (similarly to pair programming), and the pairing changed very often (as frequently as every 15-20 minutes) to achieve promiscuity and cater for diverse point of views. The second innovation was an economic value evaluation (and not the cost) which was attributed to stories. Continuous recalculation of the financial value of the stories allowed to assess the projects financial return. In this case implementation of agility in the international context allowed the involved team members to reach consensus and unanimity of decisions, vision and purpose.

  16. Agility: Agent - Ility Architecture

    DTIC Science & Technology

    2002-10-01

    Figure 2: Overview of eGents 9 Specific scientific and engineering subgoals were: • develop a lightweight agent system that uses email- based ...applets makes them hard to operate over corporate firewalls. eGents e - mail based ACL bus imposes fewer requirements on agents that use it, and firewalls...do not pose a problem for an e - mail based ACL bus. While applets limit 35 JATLites range of applications, they also make JATlite easy to deploy

  17. Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

    SciTech Connect

    Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

    1998-05-01

    Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

  18. Multiply-agile encryption in high speed communication networks

    SciTech Connect

    Pierson, L.G.; Witzke, E.L.

    1997-05-01

    Different applications have different security requirements for data privacy, data integrity, and authentication. Encryption is one technique that addresses these requirements. Encryption hardware, designed for use in high-speed communications networks, can satisfy a wide variety of security requirements if that hardware is key-agile, robustness-agile and algorithm-agile. Hence, multiply-agile encryption provides enhanced solutions to the secrecy, interoperability and quality of service issues in high-speed networks. This paper defines these three types of agile encryption. Next, implementation issues are discussed. While single-algorithm, key-agile encryptors exist, robustness-agile and algorithm-agile encryptors are still research topics.

  19. Wavelength-Agile External-Cavity Diode Laser for DWDM

    NASA Technical Reports Server (NTRS)

    Pilgrim, Jeffrey S.; Bomse, David S.

    2006-01-01

    A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

  20. The Introduction of Agility into Albania.

    ERIC Educational Resources Information Center

    Smith-Stevens, Eileen J.; Shkurti, Drita

    1998-01-01

    Describes a plan to introduce and achieve a national awareness of agility (and easy entry into the world market) for Albania through the relatively stable higher-education order. Agility's four strategic principles are enriching the customer, cooperating to enhance competitiveness, organizing to master change and uncertainty, and leveraging the…

  1. Agile Data Management with the Global Change Information System

    NASA Astrophysics Data System (ADS)

    Duggan, B.; Aulenbach, S.; Tilmes, C.; Goldstein, J.

    2013-12-01

    We describe experiences applying agile software development techniques to the realm of data management during the development of the Global Change Information System (GCIS), a web service and API for authoritative global change information under development by the US Global Change Research Program. Some of the challenges during system design and implementation have been : (1) balancing the need for a rigorous mechanism for ensuring information quality with the realities of large data sets whose contents are often in flux, (2) utilizing existing data to inform decisions about the scope and nature of new data, and (3) continuously incorporating new knowledge and concepts into a relational data model. The workflow for managing the content of the system has much in common with the development of the system itself. We examine various aspects of agile software development and discuss whether or how we have been able to use them for data curation as well as software development.

  2. Monolithic Fuel Fabrication Process Development

    SciTech Connect

    C. R. Clark; N. P. Hallinan; J. F. Jue; D. D. Keiser; J. M. Wight

    2006-05-01

    The pursuit of a high uranium density research reactor fuel plate has led to monolithic fuel, which possesses the greatest possible uranium density in the fuel region. Process developments in fabrication development include friction stir welding tool geometry and cooling improvements and a reduction in the length of time required to complete the transient liquid phase bonding process. Annealing effects on the microstructures of the U-10Mo foil and friction stir welded aluminum 6061 cladding are also examined.

  3. Agile: From Software to Mission System

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shirley, Mark H.; Hobart, Sarah Groves

    2016-01-01

    The Resource Prospector (RP) is an in-situ resource utilization (ISRU) technology demonstration mission, designed to search for volatiles at the Lunar South Pole. This is NASA's first near real time tele-operated rover on the Moon. The primary objective is to search for volatiles at one of the Lunar Poles. The combination of short mission duration, a solar powered rover, and the requirement to explore shadowed regions makes for an operationally challenging mission. To maximize efficiency and flexibility in Mission System design and thus to improve the performance and reliability of the resulting Mission System, we are tailoring Agile principles that we have used effectively in ground data system software development and applying those principles to the design of elements of the mission operations system.

  4. Processing Poetry to Develop Literacy.

    ERIC Educational Resources Information Center

    Nelson, Marguerite Hansen

    1994-01-01

    Explains the use of experimental poetry forms for decoding practice to help develop reading skills in elementary school students. The use of computers for word processing capabilities is discussed; seven forms of poetry are described; and results are examined in terms of motivation and the development of literacy. (four references) (LRW)

  5. Agile data management for curation of genomes to watershed datasets

    NASA Astrophysics Data System (ADS)

    Varadharajan, C.; Agarwal, D.; Faybishenko, B.; Versteeg, R.

    2015-12-01

    A software platform is being developed for data management and assimilation [DMA] as part of the U.S. Department of Energy's Genomes to Watershed Sustainable Systems Science Focus Area 2.0. The DMA components and capabilities are driven by the project science priorities and the development is based on agile development techniques. The goal of the DMA software platform is to enable users to integrate and synthesize diverse and disparate field, laboratory, and simulation datasets, including geological, geochemical, geophysical, microbiological, hydrological, and meteorological data across a range of spatial and temporal scales. The DMA objectives are (a) developing an integrated interface to the datasets, (b) storing field monitoring data, laboratory analytical results of water and sediments samples collected into a database, (c) providing automated QA/QC analysis of data and (d) working with data providers to modify high-priority field and laboratory data collection and reporting procedures as needed. The first three objectives are driven by user needs, while the last objective is driven by data management needs. The project needs and priorities are reassessed regularly with the users. After each user session we identify development priorities to match the identified user priorities. For instance, data QA/QC and collection activities have focused on the data and products needed for on-going scientific analyses (e.g. water level and geochemistry). We have also developed, tested and released a broker and portal that integrates diverse datasets from two different databases used for curation of project data. The development of the user interface was based on a user-centered design process involving several user interviews and constant interaction with data providers. The initial version focuses on the most requested feature - i.e. finding the data needed for analyses through an intuitive interface. Once the data is found, the user can immediately plot and download data

  6. Owning the Technical Baseline - a Key Enabler: Agility as the Counterweight to Uncertainty and Change

    DTIC Science & Technology

    2015-08-01

    future. This fundamentally means we must embrace adaptability as a basic precept for how we develop, procure and sustain our weapons systems to be...effective for the warfighter over their life cycles. The underlying metric for such agility and adaptability is speed. When we can develop and field...capabilities fast, we must do so. Furthermore, agility and adaptability can be enabled by designing systems with modularity, well-designed standards and

  7. Analysis on critical success factors for agile manufacturing evaluation in original equipment manufacturing industry-an AHP approach

    NASA Astrophysics Data System (ADS)

    Ajay Guru Dev, C.; Senthil Kumar, V. S.

    2016-09-01

    Manufacturing industries are facing challenges in the implementation of agile manufacturing in their products and processes. Agility is widely accepted as a new competitive concept in the manufacturing sector in fulfilling varying customer demand. Thus, evaluation of agile manufacturing in industries has become a necessity. The success of an organisation depends on its ability to manage finding the critical success factors and give them special and continued attention in order to bring about high performance. This paper proposes a set of critical success factors (CSFs) for evaluating agile manufacturing considered appropriate for the manufacturing sector. The analytical hierarchy process (AHP) method is applied for prioritizing the success factors, by summarizing the opinions of experts. It is believed that the proposed CSFs enable and assist manufacturing industries to achieve a higher performance in agile manufacturing so as to increase competitiveness.

  8. Investigating Agile User-Centered Design in Practice: A Grounded Theory Perspective

    NASA Astrophysics Data System (ADS)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    This paper investigates how the integration of agile methods and User-Centered Design (UCD) is carried out in practice. For this study, we have applied grounded theory as a suitable qualitative approach to determine what is happening in actual practice. The data was collected by semi-structured interviews with professionals who have already worked with an integrated agile UCD methodology. Further data was collected by observing these professionals in their working context, and by studying their documents, where possible. The emerging themes that the study found show that there is an increasing realization of the importance of usability in software development among agile team members. The requirements are emerging; and both low and high fidelity prototypes based usability tests are highly used in agile teams. There is an appreciation of each other's work from both UCD professionals and developers and both sides can learn from each other.

  9. Aircraft Maneuvers for the Evaluation of Flying Qualities and Agility. Volume 1. Maneuver Development Process and Initial Maneuver Set

    DTIC Science & Technology

    1993-08-01

    8217 TOLMAX Time of Max Lift Coeff icient QDOAVG Avg Initial Pitch Accol Over 0.25 sec QDO .25SEC Pitch Acceleration at 0.25 sec ODMAX Max Pitch...Qualities Rating Scales," A Thesis Presented for the Master of Science Degree, University of Tennessee, Knoxville, May 1992. 13. Lockenour, J.L

  10. I'll Txt U if I Have a Problem: How the Société Canadienne du Cancer in Quebec Applied Behavior-Change Theory, Data Mining and Agile Software Development to Help Young Adults Quit Smoking

    PubMed Central

    van Mierlo, Trevor; Fournier, Rachel; Jean-Charles, Anathalie; Hovington, Jacinthe; Ethier, Isabelle; Selby, Peter

    2014-01-01

    Introduction For many organizations, limited budgets and phased funding restrict the development of digital health tools. This problem is often exacerbated by the ever-increasing sophistication of technology and costs related to programming and maintenance. Traditional development methods tend to be costly and inflexible and not client centered. The purpose of this study is to analyze the use of Agile software development and outcomes of a three-phase mHealth program designed to help young adult Quebecers quit smoking. Methods In Phase I, literature reviews, focus groups, interviews, and behavior change theory were used in the adaption and re-launch of an existing evidence-based mHealth platform. Based on analysis of user comments and utilization data from Phase I, the second phase expanded the service to allow participants to live text-chat with counselors. Phase II evaluation led to the third and current phase, in which algorithms were introduced to target pregnant smokers, substance users, students, full-time workers, those affected by mood disorders and chronic disease. Results Data collected throughout the three phases indicate that the incremental evolution of the intervention has led to increasing numbers of smokers being enrolled while making functional enhancements. In Phase I (240 days) 182 smokers registered with the service. 51% (n = 94) were male and 61.5% (n = 112) were between the ages of 18–24. In Phase II (300 days), 994 smokers registered with the service. 51% (n = 508) were male and 41% (n = 403) were between the ages of 18–24. At 174 days to date 873 smokers have registered in the third phase. 44% (n = 388) were male and 24% (n = 212) were between the ages of 18–24. Conclusions Emerging technologies in behavioral science show potential, but do not have defined best practices for application development. In phased-based projects with limited funding, Agile appears to be a viable approach to building and expanding

  11. DoD Acquisitions Reform: Embracing and Implementing Agile

    DTIC Science & Technology

    2015-12-01

    austerity, the DoD must focus on Agile implementation in three main areas: training, business process re-engineering and contracting guidance.   It ...specific recommendations and bound the topic of research, the focus of this paper is on information technology ( IT ) acquisitions specifically, which...The B-52 lived and died by the quality of its sheet metal. Today, our aircraft will live or die by the quality of our software” (Hagan, Hurt

  12. Toward Agile Control of a Flexible-Spine Model for Quadruped Bounding

    DTIC Science & Technology

    2015-01-01

    step reachable states. Finally, we propose new guidelines for quantifying “agility” for legged robots , providing a preliminary framework for...quantifying and improving performance of legged systems. 1. INTRODUCTION One goal in developing legged robot systems is to provide a high degree of agility...Intuitively, being agile means that future states (i.e., position and velocity variables defining snapshots of the dynamic robot as it moves) are not

  13. Agile-Lean Software Engineering (ALSE) Evaluating Kanban in Systems Engineering

    DTIC Science & Technology

    2013-03-06

    Agile-Lean Software Engineering (ALSE) Evaluating Kanban in Systems Engineering A013 - Final Technical Report SERC-2013-TR-022-2 March 6, 2013...06 MAR 2013 2. REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE Agile-Lean Software Engineering (ALSE) Evaluating...engineering (SE). Such approaches have been seen to be valuable in software system development. In particular, the research focuses on SE where rapid response

  14. Agile Leaders, Agile Institutions: Educating Adaptive and Innovative Leaders for Today and Tomorrow

    DTIC Science & Technology

    2005-03-18

    to organizational learning , specifically for militaries at war. With these lenses and informed by observations from the CCCs, the paper advances...rapid, effective organizational learning is the essence of organizational agility. In line with this paper’s concept of individual agility...organizational agility is a metaphor for organizational learning that is faster, more flexible, and more sensitive to the speed with which individual experiential

  15. Agile science: creating useful products for behavior change in the real world.

    PubMed

    Hekler, Eric B; Klasnja, Predrag; Riley, William T; Buman, Matthew P; Huberty, Jennifer; Rivera, Daniel E; Martin, Cesar A

    2016-06-01

    Evidence-based practice is important for behavioral interventions but there is debate on how best to support real-world behavior change. The purpose of this paper is to define products and a preliminary process for efficiently and adaptively creating and curating a knowledge base for behavior change for real-world implementation. We look to evidence-based practice suggestions and draw parallels to software development. We argue to target three products: (1) the smallest, meaningful, self-contained, and repurposable behavior change modules of an intervention; (2) "computational models" that define the interaction between modules, individuals, and context; and (3) "personalization" algorithms, which are decision rules for intervention adaptation. The "agile science" process includes a generation phase whereby contender operational definitions and constructs of the three products are created and assessed for feasibility and an evaluation phase, whereby effect size estimates/casual inferences are created. The process emphasizes early-and-often sharing. If correct, agile science could enable a more robust knowledge base for behavior change.

  16. Agile multi-scale decompositions for automatic image registration

    NASA Astrophysics Data System (ADS)

    Murphy, James M.; Leija, Omar Navarro; Le Moigne, Jacqueline

    2016-05-01

    In recent works, the first and third authors developed an automatic image registration algorithm based on a multiscale hybrid image decomposition with anisotropic shearlets and isotropic wavelets. This prototype showed strong performance, improving robustness over registration with wavelets alone. However, this method imposed a strict hierarchy on the order in which shearlet and wavelet features were used in the registration process, and also involved an unintegrated mixture of MATLAB and C code. In this paper, we introduce a more agile model for generating features, in which a flexible and user-guided mix of shearlet and wavelet features are computed. Compared to the previous prototype, this method introduces a flexibility to the order in which shearlet and wavelet features are used in the registration process. Moreover, the present algorithm is now fully coded in C, making it more efficient and portable than the mixed MATLAB and C prototype. We demonstrate the versatility and computational efficiency of this approach by performing registration experiments with the fully-integrated C algorithm. In particular, meaningful timing studies can now be performed, to give a concrete analysis of the computational costs of the flexible feature extraction. Examples of synthetically warped and real multi-modal images are analyzed.

  17. Agile Data Curation at a State Geological Survey

    NASA Astrophysics Data System (ADS)

    Hills, D. J.

    2015-12-01

    State agencies, including geological surveys, are often the gatekeepers for myriad data products essential for scientific research and economic development. For example, the Geological Survey of Alabama (GSA) is mandated to explore for, characterize, and report Alabama's mineral, energy, water, and biological resources in support of economic development, conservation, management, and public policy for the betterment of Alabama's citizens, communities, and businesses. As part of that mandate, the GSA has increasingly been called upon to make our data more accessible to stakeholders. Even as demand for greater data accessibility grows, budgets for such efforts are often small, meaning that agencies must do more for less. Agile software development has yielded efficient, effective products, most often at lower cost and in shorter time. Taking guidance from the agile software development model, the GSA is working towards more agile data management and curation. To date, the GSA's work has been focused primarily on data rescue. By using workflows that maximize clear communication while encouraging simplicity (e.g., maximizing the amount of work not done or that can be automated), the GSA is bringing decades of dark data into the light. Regular checks by the data rescuer with the data provider (or their proxy) provides quality control without adding an overt burden on either party. Moving forward, these workflows will also allow for more efficient and effective data management.

  18. Integrating Agile Combat Support within Title 10 Wargames

    DTIC Science & Technology

    2015-03-26

    incorporate logistics into Air Force Title 10 wargames. More specifically, we capture Air Force Materiel Command’s (AFMC) Agile Combat Support (ACS...within an unclassified general wargame scenario. Logistics has been omitted from wargames for a multitude of reasons throughout the years. We...develop a logistics simulation model of a simplified wargame scenario designed to be run within the Logistics Composite Model (LCOM) Analysis Toolkit

  19. ROADM architectures and technologies for agile optical networks

    NASA Astrophysics Data System (ADS)

    Eldada, Louay A.

    2007-02-01

    We review the different optoelectronic component and module technologies that have been developed for use in ROADM subsystems, and describe their principles of operation, designs, features, advantages, and challenges. We also describe the various needs for reconfigurable optical add/drop switching in agile optical networks. For each network need, we present the different ROADM subsystem architecture options with their pros and cons, and describe the optoelectronic technologies supporting each architecture.

  20. Test Methods for Robot Agility in Manufacturing

    PubMed Central

    Downs, Anthony; Harrison, William; Schlenoff, Craig

    2017-01-01

    Purpose The paper aims to define and describe test methods and metrics to assess industrial robot system agility in both simulation and in reality. Design/methodology/approach The paper describes test methods and associated quantitative and qualitative metrics for assessing robot system efficiency and effectiveness which can then be used for the assessment of system agility. Findings The paper describes how the test methods were implemented in a simulation environment and real world environment. It also shows how the metrics are measured and assessed as they would be in a future competition. Practical Implications The test methods described in this paper will push forward the state of the art in software agility for manufacturing robots, allowing small and medium manufacturers to better utilize robotic systems. Originality / value The paper fulfills the identified need for standard test methods to measure and allow for improvement in software agility for manufacturing robots. PMID:28203034

  1. Agile manufacturing concepts and opportunities in ceramics

    SciTech Connect

    Booth, C.L.; Harmer, M.P.

    1995-08-01

    In 1991 Lehigh University facilitated seminars over a period of 8 months to define manufacturing needs for the 21st century. They concluded that the future will be characterized by rapid changes in technology advances, customer demands, and shifts in market dynamics and coined the term {open_quotes}Agile Manufacturing{close_quotes}. Agile manufacturing refers to the ability to thrive in an environment of constant unpredictable change. Market opportunities are attacked by partnering to form virtual firms to dynamically obtain the required skills for each product opportunity. This paper will describe and compare agile vs. traditional concepts of organization & structure, management policy and ethics, employee environment, product focus, information, and paradigm shift. Examples of agile manufacturing applied to ceramic materials will be presented.

  2. Agile Port and High Speed Ship Technologies

    DTIC Science & Technology

    2009-12-31

    Report PNW Agile Port System Demonstration Center for the Commercial Deployment of Transportation Technologies milestone agenda for accomplishing the... report summarizes the results of the remaining three projects in the FY05 program cycle, in particular the PNW Agile Port System Demonstration, a system...the accomplishment of each project and the program objectives. With the submission of this report the FY05 CCDoTT Program is complete. Bibliography

  3. Gravimelt Process development. Final report

    SciTech Connect

    Not Available

    1983-06-01

    This final report contains the results of a bench-scale program to continue the development of the TRW proprietary Gravimelt Process for chemically cleaning coal. This project consisted of two major efforts, a laboratory study aimed at identifying parameters which would influence the operation of a bench unit for desulfurization and demineralization of coal and the design, construction and operation of two types of continuous plug-flow type bench-scale fused caustic leachers. This present bench scale project has demonstrated modes for the continuous operation of fused caustic leaching of coal at coal throughputs of 1 to 5 pounds per hour. The remaining process unit operations of leach solutions regeneration and coal washing and filtration should be tested at bench scale together with fused caustic leaching of coal to demonstrate the complete Gravimelt Process. 22 figures, 11 tables.

  4. Software Development Standard Processes (SDSP)

    NASA Technical Reports Server (NTRS)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; Crean, Kathleen A.; Rinker, George C.; Smith, Thomas P.; Lum, Karen T.; Hanna, Robert A.; Erickson, Daniel E.; Gamble, Edward B., Jr.; Morgan, Scott C.; Kelsay, Michael G.; Newport, Brian J.; Lewicki, Scott A.; Stipanuk, Jeane G.; Cooper, Tonja M.; Meshkat, Leila

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  5. Processes and process development in Taiwan

    NASA Technical Reports Server (NTRS)

    Hwang, H. L.

    1986-01-01

    Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

  6. Technology development life cycle processes.

    SciTech Connect

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  7. SuperAGILE Services at ASDC

    SciTech Connect

    Preger, B.; Verrecchia, F.; Pittori, C.; Antonelli, L. A.; Giommi, P.; Lazzarotto, F.; Evangelista, Y.

    2008-05-22

    The Italian Space Agency Science Data Center (ASDC) is a facility with several responsibilities including support to all the ASI scientific missions as for management and archival of the data, acting as the interface between ASI and the scientific community and providing on-line access to the data hosted. In this poster we describe the services that ASDC provides for SuperAGILE, in particular the ASDC public web pages devoted to the dissemination of SuperAGILE scientific results. SuperAGILE is the X-Ray imager onboard the AGILE mission, and provides the scientific community with orbit-by-orbit information on the observed sources. Crucial source information including position and flux in chosen energy bands will be reported in the SuperAGILE public web page at ASDC. Given their particular interest, another web page will be dedicated entirely to GRBs and other transients, where new event alerts will be notified and where users will find all the available informations on the GRBs detected by SuperAGILE.

  8. Balancing Plan-Driven and Agile Methods in Software Engineering Project Courses

    NASA Astrophysics Data System (ADS)

    Boehm, Barry; Port, Dan; Winsor Brown, A.

    2002-09-01

    For the past 6 years, we have been teaching a two-semester software engineering project course. The students organize into 5-person teams and develop largely web-based electronic services projects for real USC campus clients. We have been using and evolving a method called Model- Based (System) Architecting and Software Engineering (MBASE) for use in both the course and in industrial applications. The MBASE Guidelines include a lot of documents. We teach risk-driven documentation: if it is risky to document something, and not risky to leave it out (e.g., GUI screen placements), leave it out. Even so, students tend to associate more documentation with higher grades, although our grading eventually discourages this. We are always on the lookout for ways to have students learn best practices without having to produce excessive documentation. Thus, we were very interested in analyzing the various emerging agile methods. We found that agile methods and milestone plan-driven methods are part of a “how much planning is enough?” spectrum. Both agile and plan-driven methods have home grounds of project characteristics where they clearly work best, and where the other will have difficulties. Hybrid agile/plan-driven approaches are feasible, and necessary for projects having a mix of agile and plan-driven home ground characteristics. Information technology trends are going more toward the agile methods' home ground characteristics of emergent requirements and rapid change, although there is a concurrent increase in concern with dependability. As a result, we are currently experimenting with risk-driven combinations of MBASE and agile methods, such as integrating requirements, test plans, peer reviews, and pair programming into “agile quality management.”

  9. AGILE/GRID Science Alert Monitoring System: The Workflow and the Crab Flare Case

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Conforti, V.; Parmiggiani, N.

    2013-10-01

    During the first five years of the AGILE mission we have observed many gamma-ray transients of Galactic and extragalactic origin. A fast reaction to unexpected transient events is a crucial part of the AGILE monitoring program, because the follow-up of astrophysical transients is a key point for this space mission. We present the workflow and the software developed by the AGILE Team to perform the automatic analysis for the detection of gamma-ray transients. In addition, an App for iPhone will be released enabling the Team to access the monitoring system through mobile phones. In 2010 September the science alert monitoring system presented in this paper recorded a transient phenomena from the Crab Nebula, generating an automated alert sent via email and SMS two hours after the end of an AGILE satellite orbit, i.e. two hours after the Crab flare itself: for this discovery AGILE won the 2012 Bruno Rossi prize. The design of this alert system is maximized to reach the maximum speed, and in this, as in many other cases, AGILE has demonstrated that the reaction speed of the monitoring system is crucial for the scientific return of the mission.

  10. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Gillespie, B.L.

    1988-02-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. DE-AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1-Test Plan; Task 2-Optimization of Mild Gasification Process; Task 3-Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4-Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  11. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Gillespie, B.L.

    1987-11-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  12. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Derting, T.M.

    1988-07-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  13. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Williams, S.W.

    1989-01-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  14. Function-based integration strategy for an agile manufacturing testbed

    NASA Astrophysics Data System (ADS)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  15. A comparison of linear speed, closed-skill agility, and open-skill agility qualities between backcourt and frontcourt adult semiprofessional male basketball players.

    PubMed

    Scanlan, Aaron T; Tucker, Patrick S; Dalbo, Vincent J

    2014-05-01

    The measurement of fitness qualities relevant to playing position is necessary to inform basketball coaching and conditioning staff of role-related differences in playing groups. To date, sprinting and agility performance have not been compared between playing positions in adult male basketball players. Therefore, the purpose of this study was to describe and compare linear speed, closed-skill agility, and open-skill agility qualities between backcourt (point guard and shooting guard positions) and frontcourt (small forward, power forward, and center positions) semiprofessional basketball players. Six backcourt (mean ± SD: age, 24.3 ± 7.9 years; stature, 183.4 ± 4.0 cm; body mass, 85.5 ± 12.3 kg; VO2max, 51.9 ± 4.8 ml·kg(-1)·min(-1)) and 6 frontcourt (mean ± SD: age, 27.5 ± 5.5 years; stature, 194.4 ± 7.1 cm; body mass, 109.4 ± 8.8 kg; VO2max, 47.1 ± 5.0 ml·kg(-1)·min(-1)) adult male basketball players completed 20-m sprint, closed-skill agility, and open-skill agility performance tests. Magnitude-based inferences revealed that backcourt players (5 m, 1.048 ± 0.027 seconds; 10 m, 1.778 ± 0.048 seconds; 20 m, 3.075 ± 0.121 seconds) possessed likely quicker linear sprint times than frontcourt players (5 m, 1.095 ± 0.085 seconds; 10 m, 1.872 ± 0.127 seconds; 20 m, 3.242 ± 0.221 seconds). Conversely, frontcourt players (1.665 ± 0.096 seconds) held possible superior closed-skill agility performance than backcourt players (1.613 ± 0.111 seconds). In addition, unclear positional differences were apparent for open-skill agility qualities. These findings indicate that linear speed and change of direction speed might be differently developed across playing positions. Furthermore, position-related functions might similarly depend on the aspects of open-skill agility performance across backcourt and frontcourt players. Basketball coaching and conditioning staff should consider the development of position-targeted training drills to improve speed, agility

  16. Process Development for Nanostructured Photovoltaics

    SciTech Connect

    Elam, Jeffrey W.

    2015-01-01

    Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

  17. Gamma-ray Astrophysics with AGILE

    SciTech Connect

    Longo, Francesco |; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-07-12

    AGILE will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational in spring 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources. Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV AGILE is now (March 2007) undergoing launcher integration and testing. The PLSV launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  18. Wideband Agile Digital Microwave Radiometer

    NASA Technical Reports Server (NTRS)

    Gaier, Todd C.; Brown, Shannon T.; Ruf, Christopher; Gross, Steven

    2012-01-01

    The objectives of this work were to take the initial steps needed to develop a field programmable gate array (FPGA)- based wideband digital radiometer backend (>500 MHz bandwidth) that will enable passive microwave observations with minimal performance degradation in a radiofrequency-interference (RFI)-rich environment. As manmade RF emissions increase over time and fill more of the microwave spectrum, microwave radiometer science applications will be increasingly impacted in a negative way, and the current generation of spaceborne microwave radiometers that use broadband analog back ends will become severely compromised or unusable over an increasing fraction of time on orbit. There is a need to develop a digital radiometer back end that, for each observation period, uses digital signal processing (DSP) algorithms to identify the maximum amount of RFI-free spectrum across the radiometer band to preserve bandwidth to minimize radiometer noise (which is inversely related to the bandwidth). Ultimately, the objective is to incorporate all processing necessary in the back end to take contaminated input spectra and produce a single output value free of manmade signals to minimize data rates for spaceborne radiometer missions. But, to meet these objectives, several intermediate processing algorithms had to be developed, and their performance characterized relative to typical brightness temperature accuracy re quirements for current and future microwave radiometer missions, including those for measuring salinity, soil moisture, and snow pack.

  19. SuperAGILE and Gamma Ray Bursts

    SciTech Connect

    Pacciani, Luigi; Costa, Enrico; Del Monte, Ettore; Donnarumma, Immacolata; Evangelista, Yuri; Feroci, Marco; Frutti, Massimo; Lazzarotto, Francesco; Lapshov, Igor; Rubini, Alda; Soffitta, Paolo; Tavani, Marco; Barbiellini, Guido; Mastropietro, Marcello; Morelli, Ennio; Rapisarda, Massimo

    2006-05-19

    The solid-state hard X-ray imager of AGILE gamma-ray mission -- SuperAGILE -- has a six arcmin on-axis angular resolution in the 15-45 keV range, a field of view in excess of 1 steradian. The instrument is very light: 5 kg only. It is equipped with an on-board self triggering logic, image deconvolution, and it is able to transmit the coordinates of a GRB to the ground in real-time through the ORBCOMM constellation of satellites. Photon by photon Scientific Data are sent to the Malindi ground station at every contact. In this paper we review the performance of the SuperAGILE experiment (scheduled for a launch in the middle of 2006), after its first onground calibrations, and show the perspectives for Gamma Ray Bursts.

  20. The Influence of Agility Training on Physiological and Cognitive Performance

    DTIC Science & Technology

    2010-11-01

    training, subjects completed a physical and cognitive battery of serum cortisol, VO2max, vertical jump , reaction time, Illinois Agility Test , body...strong trends toward the agility group improving more than the traditional group on VO2max (p=0.12), vertical jump (p=0.06), Illinois Agility Test ...levels, maximal oxygen uptake, Illinois Agility Test , Makoto reaction time, and vertical jump . The cognitive portion of the testing sessions

  1. Theoretical aspects of the agile mirror

    NASA Astrophysics Data System (ADS)

    Manheimer, Wallace M.; Fernsler, Richard

    1994-01-01

    A planar plasma mirror which can be oriented electronically could have the capability of providing electronic steering of a microwave beam in a radar or electronic warfare system. This system is denoted the agile mirror. A recent experiment has demonstrated such a planar plasma and the associated microwave reflection. This plasma was produced by a hollow cathode glow discharge, where the hollow cathode was a grooved metallic trench in a Lucite plate. Various theoretical aspects of this configuration of an agile mirror are examined here.

  2. Physical qualities predict change-of-direction speed but not defensive agility in Australian rules football.

    PubMed

    Young, Warren B; Miller, Ian R; Talpey, Scott W

    2015-01-01

    The purpose of this study was to determine the relationships between selected physical qualities, change-of-direction (COD) speed, and defensive agility performance in Australian Rules football players. Twenty-four male community-level players were assessed on sprint acceleration (10-m time), maximum strength (3 repetition-maximum half squat), leg power (countermovement jump), reactive strength (drop jump), and a single COD speed test and a defensive agility test. Change-of-direction speed was correlated with reactive strength (r = -0.645, p = 0.001) and sprint acceleration (r = 0.510, p = 0.011). Multiple regression indicated that the combined physical qualities explained 56.7% of the variance associated with COD speed (adjusted R = 0.567, p ≤ 0.05). Participants were median split into faster and slower COD speed groups, and these were compared by independent t-tests. The faster group was significantly better (p ≤ 0.05) on the sprint acceleration and reactive strength tests (large effect size). The correlations between physical qualities and agility were trivial to small (r = -0.101 to 0.123, p > 0.05) and collectively explained only 14.2% of the variance associated with agility performance (adjusted R = -0.142, p > 0.05). When faster and slower agility groups were compared, there were trivial to moderate differences (p > 0.05) in all physical qualities. It was concluded that reactive strength and sprint acceleration are important for COD speed, but the physical qualities assessed are not associated with defensive agility performance. For agility tasks similar to those in this study, sprint and resistance training should not be emphasized, and training other factors, such as the development of sport-specific technique and cognitive skill, is recommended.

  3. Development of frequency-agile high-repetition-rate CO{sub 2} DIAL systems for long range chemical remote sensing

    SciTech Connect

    Quick, C.R. Jr.; Fite, C.B.; Foy, B.R.; Jolin, J.; Mietz, D.E.

    1997-11-01

    Issues related to the development of direct detection, long-range CO{sub 2} DIAL systems for chemical detection and identification are presented and discussed including: data handling and display techniques for large, multi-{lambda} data sets, turbulence effects, slant path propagation, and speckle averaging. Data examples from various field campaigns and CO{sub 2} lidar platforms are used to illustrate the issues.

  4. An Agile Enterprise Regulation Architecture for Health Information Security Management

    PubMed Central

    Chen, Ying-Pei; Hsieh, Sung-Huai; Chien, Tsan-Nan; Chen, Heng-Shuen; Luh, Jer-Junn; Lai, Jin-Shin; Lai, Feipei; Chen, Sao-Jie

    2010-01-01

    Abstract Information security management for healthcare enterprises is complex as well as mission critical. Information technology requests from clinical users are of such urgency that the information office should do its best to achieve as many user requests as possible at a high service level using swift security policies. This research proposes the Agile Enterprise Regulation Architecture (AERA) of information security management for healthcare enterprises to implement as part of the electronic health record process. Survey outcomes and evidential experiences from a sample of medical center users proved that AERA encourages the information officials and enterprise administrators to overcome the challenges faced within an electronically equipped hospital. PMID:20815748

  5. An agile enterprise regulation architecture for health information security management.

    PubMed

    Chen, Ying-Pei; Hsieh, Sung-Huai; Cheng, Po-Hsun; Chien, Tsan-Nan; Chen, Heng-Shuen; Luh, Jer-Junn; Lai, Jin-Shin; Lai, Feipei; Chen, Sao-Jie

    2010-09-01

    Information security management for healthcare enterprises is complex as well as mission critical. Information technology requests from clinical users are of such urgency that the information office should do its best to achieve as many user requests as possible at a high service level using swift security policies. This research proposes the Agile Enterprise Regulation Architecture (AERA) of information security management for healthcare enterprises to implement as part of the electronic health record process. Survey outcomes and evidential experiences from a sample of medical center users proved that AERA encourages the information officials and enterprise administrators to overcome the challenges faced within an electronically equipped hospital.

  6. Lean and Agile: An Epistemological Reflection

    ERIC Educational Resources Information Center

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  7. The Holy Grail of Agile Acquisition

    DTIC Science & Technology

    2010-04-01

    Bestsellers …” [Erwin 2009] Motivation • Despite of Erwin’s recommendation… – Agility seems to be a simple concept and it is commonly perceived as a virtue...osd mil/dapaproject/>. . . Erwin 2009 Erwin, S.I., Washington Pulse, Pentagon Brass: Stay Away From Management Bestsellers , National Defense, August

  8. Wired Widgets: Agile Visualization for Space Situational Awareness

    NASA Astrophysics Data System (ADS)

    Gerschefske, K.; Witmer, J.

    2012-09-01

    Continued advancement in sensors and analysis techniques have resulted in a wealth of Space Situational Awareness (SSA) data, made available via tools and Service Oriented Architectures (SOA) such as those in the Joint Space Operations Center Mission Systems (JMS) environment. Current visualization software cannot quickly adapt to rapidly changing missions and data, preventing operators and analysts from performing their jobs effectively. The value of this wealth of SSA data is not fully realized, as the operators' existing software is not built with the flexibility to consume new or changing sources of data or to rapidly customize their visualization as the mission evolves. While tools like the JMS user-defined operational picture (UDOP) have begun to fill this gap, this paper presents a further evolution, leveraging Web 2.0 technologies for maximum agility. We demonstrate a flexible Web widget framework with inter-widget data sharing, publish-subscribe eventing, and an API providing the basis for consumption of new data sources and adaptable visualization. Wired Widgets offers cross-portal widgets along with a widget communication framework and development toolkit for rapid new widget development, giving operators the ability to answer relevant questions as the mission evolves. Wired Widgets has been applied in a number of dynamic mission domains including disaster response, combat operations, and noncombatant evacuation scenarios. The variety of applications demonstrate that Wired Widgets provides a flexible, data driven solution for visualization in changing environments. In this paper, we show how, deployed in the Ozone Widget Framework portal environment, Wired Widgets can provide an agile, web-based visualization to support the SSA mission. Furthermore, we discuss how the tenets of agile visualization can generally be applied to the SSA problem space to provide operators flexibility, potentially informing future acquisition and system development.

  9. AGILE and Gamma-Ray Bursts

    SciTech Connect

    Longo, Francesco; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2006-05-19

    AGILE is a Scientific Mission dedicated to high-energy astrophysics supported by ASI with scientific participation of INAF and INFN. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV. The broadband detection of GRBs and the study of implications for particle acceleration and high energy emission are primary goals of th emission. AGILE can image GRBs with 2-3 arcminutes error boxes in the hard X-ray range, and provide broadband photon-by photon detection in the 15-45 keV, 03-50 MeV, and 30 MeV-30 GeV energy ranges. Microsecond on-board photon tagging and a {approx} 100 microsecond gamma-ray detection deadtime will be crucial for fast GRB timing. On-board calculated GRB coordinates and energy fluxes will be quickly transmitted to the ground by an ORBCOMM transceiver. AGILE have recently (December 2005) completed its gamma-ray calibration. It is now (January 2006) undergoing satellite integration and testing. The PLSV launch is planned in early 2006. AGILE is then foreseen to be fully operational during the summer of 2006. It will be the only mission entirely dedicated to high-energy astrophysics above 30 MeV during the period mid-2006/mid-2007.

  10. Perspectives on Industrial Innovation from Agilent, HP, and Bell Labs

    NASA Astrophysics Data System (ADS)

    Hollenhorst, James

    2014-03-01

    Innovation is the life blood of technology companies. I will give perspectives gleaned from a career in research and development at Bell Labs, HP Labs, and Agilent Labs, from the point of view of an individual contributor and a manager. Physicists bring a unique set of skills to the corporate environment, including a desire to understand the fundamentals, a solid foundation in physical principles, expertise in applied mathematics, and most importantly, an attitude: namely, that hard problems can be solved by breaking them into manageable pieces. In my experience, hiring managers in industry seldom explicitly search for physicists, but they want people with those skills.

  11. Impact of emerging technologies on future combat aircraft agility

    NASA Technical Reports Server (NTRS)

    Nguyen, Luat T.; Gilert, William P.

    1990-01-01

    The foreseeable character of future within-visual-range air combat entails a degree of agility which calls for the integration of high-alpha aerodynamics, thrust vectoring, intimate pilot/vehicle interfaces, and advanced weapons/avionics suites, in prospective configurations. The primary technology-development programs currently contributing to these goals are presently discussed; they encompass the F-15 Short Takeoff and Landing/Maneuver Technology Demonstrator Program, the Enhanced Fighter Maneuverability Program, the High Angle-of-Attack Technology Program, and the X-29 Technology Demonstrator Program.

  12. The Southern Argentine Agile Meteor Radar (SAAMER)

    NASA Astrophysics Data System (ADS)

    Janches, Diego

    2014-11-01

    The Southern Argentina Agile Meteor Radar (SAAMER) is a new generation system deployed in Rio Grande, Tierra del Fuego, Argentina (53 S) in May 2008. SAAMER transmits 10 times more power than regular meteor radars, and uses a newly developed transmitting array, which focuses power upward instead of the traditional single-antenna-all-sky configuration. The system is configured such that the transmitter array can also be utilized as a receiver. The new design greatly increases the sensitivity of the radar enabling the detection of large number of particles at low zenith angles. The more concentrated transmitted power enables additional meteor studies besides those typical of these systems based on the detection of specular reflections, such as routine detections of head echoes and non-specular trails, previously only possible with High Power and Large Aperture radars. In August 2010, SAAMER was upgraded to a system capable to determine meteoroid orbital parameters. This was achieved by adding two remote receiving stations approximately 10 km away from the main site in near perpendicular directions. The upgrade significantly expands the science that is achieved with this new radar enabling us to study the orbital properties of the interplanetary dust environment. Because of the unique geographical location, SAAMER allows for additional inter-hemispheric comparison with measurements from Canadian Meteor Orbit Radar, which is geographically conjugate. Initial surveys show, for example, that SAAMER observes a very strong contribution of the South Toroidal Sporadic meteor source, of which limited observational data is available. In addition, SAAMER offers similar unique capabilities for meteor showers and streams studies given the range of ecliptic latitudes that the system enables detailed study of showers at high southern latitudes (e.g July Phoenicids or Puppids complex). Finally, SAAMER is ideal for the deployment of complementary instrumentation in both, permanent

  13. Process Accountability in Curriculum Development.

    ERIC Educational Resources Information Center

    Gooler, Dennis D.; Grotelueschen, Arden

    This paper urges the curriculum developer to assume the accountability for his decisions necessitated by the actual ways our society functions. The curriculum developer is encouraged to recognize that he is a salesman with a commodity (the curriculum). He is urged to realize that if he cannot market the package to the customers (the various…

  14. Architecture and performances of the AGILE Telemetry Preprocessing System (TMPPS)

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Lazzarotto, F.; Di Cocco, G.; Fuschino, F.; Tavani, M.

    2008-07-01

    AGILE is an Italian Space Agency (ASI) satellite dedicated to high energy Astrophysics. It was launched successfully on 23 April 2007, and it has been operated by the AGILE Ground Segment, consisting of the Ground Station located in Malindi (Kenia), the Mission Operations Centre (MOC) and the AGILE Data Centre (ADC) established in Italy, at Telespazio in Fucino and at the ASI Science Data Centre (ASDC) in Frascati respectively. Due to the low equatorial orbit at ~ 530 Km. with inclination angle of ~ 2.5°, the satellite passes over the Ground Station every ~ 100'. During the visibility period of . ~ 12', the Telemetry (TM) is down linked through two separated virtual channels, VC0 and VC1. The former is devoted to the real time TM generated during the pass at the average rate of 50 Kbit/s and is directly relayed to the Control Centre. The latter is used to downlink TM data collected on the satellite on-board mass memory during the non visibility period. This generates at the Ground Station a raw TM file of up to 37 MByte. Within 20' after the end of the contact, both the real time and mass memory TM arrive at ADC through the dedicated VPN ASINet. Here they are automatically detected and ingested by the TMPPS pipeline in less than 5 minutes. The TMPPS archives each TM file and sorts its packets into one stream for each of the different TM layout. Each stream is processed in parallel in order to unpack the various telemetry field and archive them into suitable FITS files. Each operation is tracked into a MySQL data base which interfaces the TMPPS pipeline to the rest of the scientific pipeline running at ADC. In this paper the architecture and the performance of the TMPPS will be described and discussed.

  15. Agile development of ontologies through conversation

    NASA Astrophysics Data System (ADS)

    Braines, Dave; Bhattal, Amardeep; Preece, Alun D.; de Mel, Geeth

    2016-05-01

    Ontologies and semantic systems are necessarily complex but offer great potential in terms of their ability to fuse information from multiple sources in support of situation awareness. Current approaches do not place the ontologies directly into the hands of the end user in the field but instead hide them away behind traditional applications. We have been experimenting with human-friendly ontologies and conversational interactions to enable non-technical business users to interact with and extend these dynamically. In this paper we outline our approach via a worked example, covering: OWL ontologies, ITA Controlled English, Sensor/mission matching and conversational interactions between human and machine agents.

  16. Project Success in Agile Development Software Projects

    ERIC Educational Resources Information Center

    Farlik, John T.

    2016-01-01

    Project success has multiple definitions in the scholarly literature. Research has shown that some scholars and practitioners define project success as the completion of a project within schedule and within budget. Others consider a successful project as one in which the customer is satisfied with the product. This quantitative study was conducted…

  17. Exploring the possibility of modeling a genetic counseling guideline using agile methodology.

    PubMed

    Choi, Jeeyae

    2013-01-01

    Increased demand of genetic counseling services heightened the necessity of a computerized genetic counseling decision support system. In order to develop an effective and efficient computerized system, modeling of genetic counseling guideline is an essential step. Throughout this pilot study, Agile methodology with United Modeling Language (UML) was utilized to model a guideline. 13 tasks and 14 associated elements were extracted. Successfully constructed conceptual class and activity diagrams revealed that Agile methodology with UML was a suitable tool to modeling a genetic counseling guideline.

  18. Lesson Learned from AGILE and LARES ASI Projects About MATED Data Collection and Post Analysis

    NASA Astrophysics Data System (ADS)

    Carpentiero, Rita; Mrchetti, Ernesto; Natalucci, Silvia; Portelli, Claudio

    2012-07-01

    ASI has managed and collected data on project development of two scientific all-Italian missions: AGILE and LARES. Collection of the Model And Test Effectiveness Database (MATED) data, concerning Project, AIV (Assembly Integration and Verification) and NCR (Non Conformance Report) aspects has been performed by the Italian Space Agency (ASI), using available technical documentation of both AGILE e LARES projects. In this paper some consideration on the needs of 'real time' data collection is made, together with proposal of front end improvement of this tool. In addition a preliminary analysis of MATED effectiveness related to the above ASI projects will be presented in a bottom-up and post verification approach.

  19. A Quantitative Examination of Critical Success Factors Comparing Agile and Waterfall Project Management Methodologies

    ERIC Educational Resources Information Center

    Pedersen, Mitra

    2013-01-01

    This study investigated the rate of success for IT projects using agile and standard project management methodologies. Any successful project requires use of project methodology. Specifically, large projects require formal project management methodologies or models, which establish a blueprint of processes and project planning activities. This…

  20. Materials Processing Research and Development

    DTIC Science & Technology

    2010-08-01

    of microstructural evolution, (5) development of Gamma and Beta-Gamma titanium alloys towards rolled sheets for thermal protection applications, ( 6 ...the hydrostatic stress. This work was published in Metallurgical and Materials Transactions A by Nicolaou, Miller, and Semiatin [ 6 ]. 4 2.2.2 The...observed values for the Titanium 6242s measured by Porter and John, as well as Ti6- 4 alloy reported on by Chan in Mater. Trans, 2008. In addition

  1. Managing the Software Development Process

    NASA Technical Reports Server (NTRS)

    Lubelczky, Jeffrey T.; Parra, Amy

    1999-01-01

    The goal of any software development project is to produce a product that is delivered on time, within the allocated budget, and with the capabilities expected by the customer and unfortunately, this goal is rarely achieved. However, a properly managed project in a mature software engineering environment can consistently achieve this goal. In this paper we provide an introduction to three project success factors, a properly managed project, a competent project manager, and a mature software engineering environment. We will also present an overview of the benefits of a mature software engineering environment based on 24 years of data from the Software Engineering Lab, and suggest some first steps that an organization can take to begin benefiting from this environment. The depth and breadth of software engineering exceeds this paper, various references are cited with a goal of raising awareness and encouraging further investigation into software engineering and project management practices.

  2. Fall 2014 SEI Research Review Applying Agile Methods to DoD

    DTIC Science & Technology

    2014-10-28

    2014 © 2014 Carnegie Mellon University Agile Defense Adoption Proponents Team (ADAPT) member E-Learning Agile Course Multiple Presentations ... presentations , program committees: GSAW 2014, Agile 2014, Contracts in Agile International Meeting, AFEI/SEI DoD Agile Summit, GAO Working Groups 8

  3. Development of novel microencapsulation processes

    NASA Astrophysics Data System (ADS)

    Yin, Weisi

    of polymer solution suspended in water or from a spray. Hollow PS particles were obtained by swelling PS latex with solvent, freezing in liquid nitrogen, and drying in vacuum. It is shown that the particle morphology is due to phase separation in the polymer emulsion droplets upon freezing in liquid nitrogen, and that morphological changes are driven largely by lowering interfacial free energy. The dried hollow particles were resuspended in a dispersing media and exposed to a plasticizer, which imparts mobility to polymer chains, to close the surface opening and form microcapsules surrounding an aqueous core. The interfacial free energy difference between the hydrophobic inside and hydrophilic outside surfaces is the major driving force for closing the hole on the surface. A controlled release biodegradable vehicle for drug was made by encapsulating procaine hydrochloride, a water-soluble drug, into the core of poly(DL-lactide) (PLA) microcapsules, which were made by the freeze-drying and subsequent closing process. The encapsulation efficiency is affected by the hollow particle morphology, amount of closing agent, exposure time, surfactant, and method of dispersing the hollow particles in water. Controlled release of procaine hydrochloride from the microcapsules into phosphate buffer was observed. The use of benign solvents dimethyl carbonate in spray/freeze-drying and CO2 for closing would eliminate concerns of residual harmful solvent in the product. The ease of separation of CO2 from the drug solution may also enable recycling of the drug solution to increase the overall encapsulation efficiency using these novel hollow particles.

  4. An Agile Methodology for Implementing Service-Oriented Architecture in Small and Medium Sized Organizations

    ERIC Educational Resources Information Center

    Laidlaw, Gregory

    2013-01-01

    The purpose of this study is to evaluate the use of Lean/Agile principles, using action research to develop and deploy new technology for Small and Medium sized enterprises. The research case was conducted at the Lapeer County Sheriff's Department and involves the initial deployment of a Service Oriented Architecture to alleviate the data…

  5. Casting Process Developments for Improving Quality

    NASA Astrophysics Data System (ADS)

    El-Mahallawy, Nahed A.; Taha, Mohamed A.

    1985-09-01

    This paper presents a short synopsis of the important developments in casting/solidification processes, as well as the important advances in the conventional methods. These developments are discussed related to quality aspects. The position of each process with respect to practice, as well as expected gains in cost, are examined. The paper briefly features the author's work on innovative processes (directional solidification, rheocasting, squeeze-casting and rapid solidification) as well as work of other investigators on developments in conventional methods.

  6. Frequency-agile microwave components using ferroelectric materials

    NASA Astrophysics Data System (ADS)

    Colom-Ustariz, Jose G.; Rodriguez-Solis, Rafael; Velez, Salmir; Rodriguez-Acosta, Snaider

    2003-04-01

    The non-linear electric field dependence of ferroelectric thin films can be used to design frequency and phase agile components. Tunable components have traditionally been developed using mechanically tuned resonant structures, ferrite components, or semiconductor-based voltage controlled electronics, but they are limited by their frequency performance, high cost, hgih losses, and integration into larger systems. In contrast, the ferroelectric-based tunable microwave component can easily be integrated into conventional microstrip circuits and attributes such as small size, light weight, and low-loss make these components attractive for broadband and multi-frequency applications. Components that are essential elements in the design of a microwave sensor can be fabricated with ferroelectric materials to achieve tunability over a broad frequency range. It has been reported that with a thin ferroelectric film placed between the top conductor layer and the dielectric material of a microstrip structure, and the proper DC bias scheme, tunable components above the Ku band can be fabricated. Components such as phase shifters, coupled line filters, and Lange couplers have been reported in the literature using this technique. In this wokr, simulated results from a full wave electromagnetic simulator are obtained to show the tunability of a matching netowrk typically used in the design of microwave amplifiers and antennas. In addition, simulated results of a multilayer Lange coupler, and a patch antenna are also presented. The results show that typical microstrip structures can be easily modified to provide frequency agile capabilities.

  7. Candidate control design metrics for an agile fighter

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

    1991-01-01

    Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

  8. Rolling and tumbling: status of the SuperAGILE experiment

    NASA Astrophysics Data System (ADS)

    Del Monte, E.; Costa, E.; di Persio, G.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Mastropietro, M.; Morelli, E.; Pacciani, L.; Rapisarda, M.; Rubini, A.; Soffitta, P.; Tavani, M.; Argan, A.; Trois, A.

    2010-07-01

    The SuperAGILE experiment is the hard X-ray monitor of the AGILE mission. It is a 2 x one-dimensional imager, with 6-arcmin angular resolution in the energy range 18 - 60 keV and a field of view in excess of 1 steradian. SuperAGILE is successfully operating in orbit since Summer 2007, providing long-term monitoring of bright sources and prompt detection and localization of gamma-ray bursts. Starting on October 2009 the AGILE mission lost its reaction wheel and the satellite attitude is no longer stabilized. The current mode of operation of the AGILE satellite is a Spinning Mode, around the Sun-pointing direction, with an angular velocity of about 0.8 degree/s (corresponding to 8 times the SuperAGILE point spread function every second). In these new conditions, SuperAGILE continuously scans a much larger fraction of the sky, with much smaller exposure to each region. In this paper we review some of the results of the first 2.5 years of "standard" operation of SuperAGILE, and show how new implementations in the data analysis software allows to continue the hard X-ray sky monitoring by SuperAGILE also in the new attitude conditions.

  9. Computer vision challenges and technologies for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Molley, Perry A.

    1996-02-01

    applicable to commercial production processes and applications. Computer vision will play a critical role in the new agile production environment for automation of processes such as inspection, assembly, welding, material dispensing and other process control tasks. Although there are many academic and commercial solutions that have been developed, none have had widespread adoption considering the huge potential number of applications that could benefit from this technology. The reason for this slow adoption is that the advantages of computer vision for automation can be a double-edged sword. The benefits can be lost if the vision system requires an inordinate amount of time for reprogramming by a skilled operator to account for different parts, changes in lighting conditions, background clutter, changes in optics, etc. Commercially available solutions typically require an operator to manually program the vision system with features used for the recognition. In a recent survey, we asked a number of commercial manufacturers and machine vision companies the question, 'What prevents machine vision systems from being more useful in factories?' The number one (and unanimous) response was that vision systems require too much skill to set up and program to be cost effective.

  10. The frequency-agile radar: A multifunctional approach to remote sensing of the ionosphere

    NASA Astrophysics Data System (ADS)

    Tsunoda, R. T.; Livingston, R. C.; Buonocore, J. J.; McKinley, A. V.

    1995-09-01

    We introduce a new kind of diagnostic sensor that combines multifunctional measurement capabilities for ionospheric research. Multifunctionality is realized through agility in frequency selection over an extended band (1.5 to 50 MHz), system modularity, complete system control by software written in C, and a user-friendly computer interface. This sensor, which we call the frequency-agile radar (FAR), incorporates dual radar channels and an arbitrary waveform synthesizer that allows creative design of sophisticated waveforms as a means of increasing its sensitivity to weak signals while minimizing loss in radar resolution. The sensitivity of the FAR is determined by two sets of power amplifier modules: four 4-kW solid-state broadband amplifiers, and four 30-kW vacuum tube amplifiers. FAR control is by an AT-bus personal computer with on-line processing by a programmable array processor. The FAR does not simply house the separate functions of most radio sensors in use today, it provides convenient and flexible access to those functions as elements to be used in any combination. Some of the first new results obtained with the FAR during recent field campaigns are presented to illustrate its versatility. These include (1) the first detection of anomalous high-frequency (HF) reflections from a barium ion cloud, (2) the first evidence of unexpectedly large drifts and a shear north of the equatorial electrojet, (3) the first HF radar signature of a developing equatorial plasma bubble, and (4) the first measurements by a portable radar of altitude-extended, quasi-periodic backscatter from midlatitude sporadic E. We also mention the potential of the FAR for atmospheric remote sensing.

  11. Development of the Concise Data Processing Assessment

    ERIC Educational Resources Information Center

    Day, James; Bonn, Doug

    2011-01-01

    The Concise Data Processing Assessment (CDPA) was developed to probe student abilities related to the nature of measurement and uncertainty and to handling data. The diagnostic is a ten question, multiple-choice test that can be used as both a pre-test and post-test. A key component of the development process was interviews with students, which…

  12. ASRM test report: Autoclave cure process development

    NASA Technical Reports Server (NTRS)

    Nachbar, D. L.; Mitchell, Suzanne

    1992-01-01

    ASRM insulated segments will be autoclave cured following insulation pre-form installation and strip wind operations. Following competitive bidding, Aerojet ASRM Division (AAD) Purchase Order 100142 was awarded to American Fuel Cell and Coated Fabrics Company, Inc. (Amfuel), Magnolia, AR, for subcontracted insulation autoclave cure process development. Autoclave cure process development test requirements were included in Task 3 of TM05514, Manufacturing Process Development Specification for Integrated Insulation Characterization and Stripwind Process Development. The test objective was to establish autoclave cure process parameters for ASRM insulated segments. Six tasks were completed to: (1) evaluate cure parameters that control acceptable vulcanization of ASRM Kevlar-filled EPDM insulation material; (2) identify first and second order impact parameters on the autoclave cure process; and (3) evaluate insulation material flow-out characteristics to support pre-form configuration design.

  13. ASRM test report: Autoclave cure process development

    NASA Astrophysics Data System (ADS)

    Nachbar, D. L.; Mitchell, Suzanne

    1992-05-01

    ASRM insulated segments will be autoclave cured following insulation pre-form installation and strip wind operations. Following competitive bidding, Aerojet ASRM Division (AAD) Purchase Order 100142 was awarded to American Fuel Cell and Coated Fabrics Company, Inc. (Amfuel), Magnolia, AR, for subcontracted insulation autoclave cure process development. Autoclave cure process development test requirements were included in Task 3 of TM05514, Manufacturing Process Development Specification for Integrated Insulation Characterization and Stripwind Process Development. The test objective was to establish autoclave cure process parameters for ASRM insulated segments. Six tasks were completed to: (1) evaluate cure parameters that control acceptable vulcanization of ASRM Kevlar-filled EPDM insulation material; (2) identify first and second order impact parameters on the autoclave cure process; and (3) evaluate insulation material flow-out characteristics to support pre-form configuration design.

  14. The AIV quick look and health monitoring system of the AGILE payload

    NASA Astrophysics Data System (ADS)

    Bulgarelli, Andrea; Gianotti, Fulvio; Trifoglio, Massimo; Di Cocco, Guido; Tavani, Marco; Marisaldi, Martino

    2008-07-01

    AGILE is an ASI (Italian Space Agency) Small Scientific Mission dedicated to high-energy astrophysics which was launched on April 23 2007 from Satish Dawan Space Centre, India) on a PSLV-C8 rocket. The AGILE Payload is composed of three instruments: a Tungsten-Silicon Tracker designed to detect and image photons in the 30 MeV-50 GeV energy band, an X-ray imager called SuperAGILE that works in the 18-60 keV energy band, and a Minicalorimeter that detects gamma-rays or particle energy deposits between 300~keV and 200~MeV. The instrument is surrounded by an anti-coincidence (AC) system. We have developed a set of Quick Look software tools in the framework of the Test Equipment (TE) and the Electrical Ground Support Equipment (EGSE. This s/w is required in order to support all the assembly, integration and verification (AIV) activities to be carried out for the AGILE mission, from data handling unit level to payload integrated level, calibration campaign, launch campaign and in-orbit commissioning. These software tools have enabled us to test the engineering performance and to perform a health check of the Payload during the various phases. We have used an incremental development approach and a common framework to rapidly adapt our software to the different requirements of the various phases.

  15. Information Models, Data Requirements, and Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, John S.; Crichton, Dan; Ritschel, Bernd; Hardman, Sean; Joyner, Ron

    2015-04-01

    The Planetary Data System's next generation system, PDS4, is an example of the successful use of an ontology-based Information Model (IM) to drive the development and operations of a data system. In traditional systems engineering, requirements or statements about what is necessary for the system are collected and analyzed for input into the design stage of systems development. With the advent of big data the requirements associated with data have begun to dominate and an ontology-based information model can be used to provide a formalized and rigorous set of data requirements. These requirements address not only the usual issues of data quantity, quality, and disposition but also data representation, integrity, provenance, context, and semantics. In addition the use of these data requirements during system's development has many characteristics of Agile Curation as proposed by Young et al. [Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community, AGU 2014], namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. For example customers can be satisfied through early and continuous delivery of system software and services that are configured directly from the information model. This presentation will describe the PDS4 architecture and its three principle parts: the ontology-based Information Model (IM), the federated registries and repositories, and the REST-based service layer for search, retrieval, and distribution. The development of the IM will be highlighted with special emphasis on knowledge acquisition, the impact of the IM on development and operations, and the use of shared ontologies at multiple governance levels to promote system interoperability and data correlation.

  16. Digital processing system for developing countries

    NASA Technical Reports Server (NTRS)

    Nanayakkara, C.; Wagner, H.

    1977-01-01

    An effort was undertaken to perform simple digital processing tasks using pre-existing general purpose digital computers. An experimental software package, LIGMALS, was obtained and modified for this purpose. The resulting software permits basic processing tasks to be performed including level slicing, gray mapping and ratio processing. The experience gained in this project indicates a possible direction which may be used by other developing countries to obtain digital processing capabilities.

  17. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  18. ASSET: a software tool for the evaluation of manoeuvre capabilities of highly agile satellites

    NASA Astrophysics Data System (ADS)

    Barschke, Merlin F.; Levenhagen, Jens; Reggio, Domenico; Roberts, Peter C. E.

    2014-03-01

    The new generation of agile earth observation satellites provides much higher observation capabilities than their non-agile predecessors. From a kinematic point of view, these capabilities result in more complex guidance laws for the spacecraft's attitude control system. The computation of these guidance laws is driven by a number of factors. For instance, the Earth's curved shape and its rotation in combination with the possible scan path geometries lead to a highly nonlinear relation between the motion of the satellite and the line-of-sight projection onto Earth. In this paper ASSET (Agile Satellites Scenario Evaluation Tool) is presented. ASSET is a modular MATLAB command line tool developed at Astrium GmbH, Germany, to asses the manoeuvre capabilities of agile satellites carrying time-delayed integration instruments. Each single scenario may consist of one or several ground scans, linked by suitable spacecraft slews. Once the entire scenario is defined, ASSET will analyse whether the kinematic and dynamic constraints of a specific satellite allow this scenario to be performed and will then generate the related guidance profile (angles and angular rates). The satellites' ground track, the projection of the instruments line-of-sight, and the projection of the instruments field of view onto the earth can be plotted for a visual inspection. ASSET can perform the analysis of scenarios with several different scan modes usually performed by this type of satellite.

  19. Robot development for nuclear material processing

    SciTech Connect

    Pedrotti, L.R.; Armantrout, G.A.; Allen, D.C.; Sievers, R.H. Sr.

    1991-07-01

    The Department of Energy is seeking to modernize its special nuclear material (SNM) production facilities and concurrently reduce radiation exposures and process and incidental radioactive waste generated. As part of this program, Lawrence Livermore National Laboratory (LLNL) lead team is developing and adapting generic and specific applications of commercial robotic technologies to SNM pyrochemical processing and other operations. A working gantry robot within a sealed processing glove box and a telerobot control test bed are manifestations of this effort. This paper describes the development challenges and progress in adapting processing, robotic, and nuclear safety technologies to the application. 3 figs.

  20. High-throughput process development: I. Process chromatography.

    PubMed

    Rathore, Anurag S; Bhambure, Rahul

    2014-01-01

    Chromatographic separation serves as "a workhorse" for downstream process development and plays a key role in removal of product-related, host cell-related, and process-related impurities. Complex and poorly characterized raw materials and feed material, low feed concentration, product instability, and poor mechanistic understanding of the processes are some of the critical challenges that are faced during development of a chromatographic step. Traditional process development is performed as trial-and-error-based evaluation and often leads to a suboptimal process. High-throughput process development (HTPD) platform involves an integration of miniaturization, automation, and parallelization and provides a systematic approach for time- and resource-efficient chromatography process development. Creation of such platforms requires integration of mechanistic knowledge of the process with various statistical tools for data analysis. The relevance of such a platform is high in view of the constraints with respect to time and resources that the biopharma industry faces today. This protocol describes the steps involved in performing HTPD of process chromatography step. It described operation of a commercially available device (PreDictor™ plates from GE Healthcare). This device is available in 96-well format with 2 or 6 μL well size. We also discuss the challenges that one faces when performing such experiments as well as possible solutions to alleviate them. Besides describing the operation of the device, the protocol also presents an approach for statistical analysis of the data that is gathered from such a platform. A case study involving use of the protocol for examining ion-exchange chromatography of granulocyte colony-stimulating factor (GCSF), a therapeutic product, is briefly discussed. This is intended to demonstrate the usefulness of this protocol in generating data that is representative of the data obtained at the traditional lab scale. The agreement in the

  1. Integrated product definition representation for agile numerical control applications

    SciTech Connect

    Simons, W.R. Jr.; Brooks, S.L.; Kirk, W.J. III; Brown, C.W.

    1994-11-01

    Realization of agile manufacturing capabilities for a virtual enterprise requires the integration of technology, management, and work force into a coordinated, interdependent system. This paper is focused on technology enabling tools for agile manufacturing within a virtual enterprise specifically relating to Numerical Control (N/C) manufacturing activities and product definition requirements for these activities.

  2. Scaling Agile Infrastructure to People

    NASA Astrophysics Data System (ADS)

    Jones, B.; McCance, G.; Traylen, S.; Barrientos Arias, N.

    2015-12-01

    When CERN migrated its infrastructure away from homegrown fabric management tools to emerging industry-standard open-source solutions, the immediate technical challenges and motivation were clear. The move to a multi-site Cloud Computing model meant that the tool chains that were growing around this ecosystem would be a good choice, the challenge was to leverage them. The use of open-source tools brings challenges other than merely how to deploy them. Homegrown software, for all the deficiencies identified at the outset of the project, has the benefit of growing with the organization. This paper will examine what challenges there were in adapting open-source tools to the needs of the organization, particularly in the areas of multi-group development and security. Additionally, the increase in scale of the plant required changes to how Change Management was organized and managed. Continuous Integration techniques are used in order to manage the rate of change across multiple groups, and the tools and workflow for this will be examined.

  3. Combat Agility Management System (CAMS)

    NASA Technical Reports Server (NTRS)

    Skow, Andrew; Porada, William

    1994-01-01

    The proper management of energy becomes a complex task in fighter aircraft which have high angle of attack (AOA) capability. Maneuvers at high AOA are accompanied by high bleed rates (velocity decrease), a characteristic that is usually undesirable in a typical combat arena. Eidetics has developed under NASA SBIR Phase 1 and NAVAIR SBIR Phase 2 contracts a system which allows a pilot to more easily and effectively manage the trade-off of energy (airspeed or altitude) for turn rate while not imposing hard limits on the high AOA nose pointing capability that can be so important in certain air combat maneuver situations. This has been accomplished by incorporating a two-stage angle of attack limiter into the flight control laws. The first stage sets a limit on AOA to achieve a limit on the maximum bleed rate (selectable) by limiting AOA to values which are dependent on the aircraft attitude and dynamic pressure (or flight path, velocity, and altitude). The second stage sets an AOA limit near the AOA for C(sub l max). One of the principal benefits of such a system is that it enables a low-experience pilot to become much more proficient at managing his energy. The Phase 2 simulation work is complete, and an exploratory flight test on the F-18 HARV is planned for the Fall of 1994 to demonstrate/validate the concept.

  4. Software Model Of Software-Development Process

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Synott, Debra J.; Levary, Reuven R.

    1990-01-01

    Collection of computer programs constitutes software tool for simulation of medium- to large-scale software-development projects. Necessary to include easily identifiable and more-readily quantifiable characteristics like costs, times, and numbers of errors. Mathematical model incorporating these and other factors of dynamics of software-development process implemented in the Software Life Cycle Simulator (SLICS) computer program. Simulates dynamics of software-development process. In combination with input and output expert software systems and knowledge-based management software system, develops information for use in managing large software-development project. Intended to aid managers in planning, managing, and controlling software-development processes by reducing uncertainties in budgets, required personnel, and schedules.

  5. Scaleup of IGT MILDGAS Process to a process development unit

    SciTech Connect

    Campbell, J.A.L.; Longanbach, J.; Johnson, R.; Underwood, K.; Mead, J.; Carty, R.H.

    1992-12-31

    The MILDGAS process is capable of processing both eastern caking and western non-caking coals to yield a slate of liquid and solid products. The liquids can be processed to produce: feedstocks for chemicals; pitch for use as a binder for electrodes in the aluminum industry; and fuels. Depending on the feed coal characteristics and the operating conditions, the char can be used as an improved fuel for power generation or can be used to make form coke for steel-making blast furnaces or for foundry cupola operations. The specific objectives of the program are to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for design scaleup; obtain large batches of coal-derived co-products for industrial evaluation; prepare a detailed design of a demonstration unit; and develop technical and economic plans for commercialization of the MILDGAS process. In this paper, the authors present the process design of the PDU facility, a description of the expected product distribution and the project test plan to be implemented in the program.

  6. Analysis of VLF signals associated to AGILE Terrestrial Gamma-ray Flashes detected over Central America

    NASA Astrophysics Data System (ADS)

    Marisaldi, Martino; Lyu, Fanchao; Cummer, Steven; Ursi, Alessandro

    2016-04-01

    Analysis of radio signals detected on ground and associated to Terrestrial Gamma-ray Flashes (TGFs) have proven to be a successful tool to extract information on the TGF itself and the possible associated lightning process. Triangulation of Very Low Frequency (VLF) signals by means of the Time Of Arrival technique provides TGF location with few km accuracy. The AGILE satellite is routinely observing TGFs on a narrow band across the Equator, limited by the small satellite orbital inclination (2.5°). However, until recently it was not possible to provide firm associations between AGILE TGFs and radio signals, because of two main limiting factors. First, dead-time effects led to a bias towards long duration events in AGILE TGF sample, which are less likely associated to strong radio pulses. In addition, most VLF detection networks are less sensitive along the equatorial region. Since the end of March 2015 a major change in the AGILE MiniCalorimeter instrument configuration resulted in a ten fold increase in TGF detection rate, and in the detection of events as short as 20 microseconds. 14% of the events in the new sample resulted simultaneous (within 200 microseconds) to sferics detected by the World Wide Lightning Location Network (WWLLN), therefore a source localisation is available for these events. We present here the first analysis of VLF waveforms associated to AGILE TGFs observed above Central America, detected by magnetic field sensors deployed in Puerto Rico. Among the seven TGFs with a WWLLN location at a distance lower than 10000 km from the sensors, four of them have detectable signals. These events are the closest to the sensors, with distance less than 7500 km. We present here the properties of these TGFs and the characteristics of the associated radio waveforms.

  7. EUV extendibility via dry development rinse process

    NASA Astrophysics Data System (ADS)

    Sayan, Safak; Zheng, Tao; De Simone, Danilo; Vandenberghe, Geert

    2016-03-01

    Conventional photoresist processing involves resist coating, exposure, post-exposure bake, development, rinse and spin drying of a wafer. DDRP mitigates pattern collapse by applying a special polymer material (DDRM) which replaces the exposed/developed part of the photoresist material before wafer is spin dried. As noted above, the main mechanism of pattern collapse is the capillary forces governed by surface tension of rinse water and its asymmetrical recession from both sides of the lines during the drying step of the develop process. DDRP essentially eliminates these failure mechanisms by replacing remaining rinse water with DDRM and providing a structural framework that support resist lines from both sides during spin dry process. Dry development rinse process (DDRP) eliminates the root causes responsible for pattern collapse of photoresist line structures. Since these collapse mechanisms are mitigated, without the need for changes in the photoresist itself, achievable resolution of the state-of-the-art EUV photoresists can further be improved.

  8. WRAP process area development control work plan

    SciTech Connect

    Leist, K.L., Fluor Daniel Hanford

    1997-02-27

    This work plan defines the manner in which the Waste Receiving and Processing Facility, Module I Process Area will be maintained under development control status. This status permits resolution of identified design discrepancies, control system changes, as-building of equipment, and perform modifications to increase process operability and maintainability as parallel efforts. This work plan maintains configuration control as these efforts are undertaken. This task will end with system testing and reissue of field verified design drawings.

  9. Precision grinding process development for brittle materials

    SciTech Connect

    Blaedel, K L; Davis, P J; Piscotty, M A

    1999-04-01

    High performance, brittle materials are the materials of choice for many of today's engineering applications. This paper describes three separate precision grinding processes developed at Lawrence Liver-more National Laboratory to machine precision ceramic components. Included in the discussion of the precision processes is a variety of grinding wheel dressing, truing and profiling techniques.

  10. Course Development: Industrial or Social Process.

    ERIC Educational Resources Information Center

    Kaufman, David

    The development of course materials at the Open Learning Institute, British Columbia, Canada, is examined from two perspectives: as an industrial process and as a social process. The public institute provides distance education through paced home-study courses. The course team model used at the Institute is a system approach. Course development…

  11. Teaching Information Systems Development via Process Variants

    ERIC Educational Resources Information Center

    Tan, Wee-Kek; Tan, Chuan-Hoo

    2010-01-01

    Acquiring the knowledge to assemble an integrated Information System (IS) development process that is tailored to the specific needs of a project has become increasingly important. It is therefore necessary for educators to impart to students this crucial skill. However, Situational Method Engineering (SME) is an inherently complex process that…

  12. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the giant asteroid Vesta and the dwarf planet Ceres, the two largest members of the main asteroid belt. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional low-thrust design objectives (like minimum change in velocity or minimum transfer time) often result in thrust direction time evolutions that cannot be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and turned out to be essential to the successful navigation of Dawn at Vesta.

  13. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the two largest members of the main asteroid belt, the giant asteroid Vesta and the dwarf planet Ceres. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional thrust design objectives (like minimum (Delta)V or minimum transfer time) often result in thrust direction time evolutions that can not be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and necessary to successfully navigate Dawn through all orbital transfers at Vesta.

  14. A new algorithm for agile satellite-based acquisition operations

    NASA Astrophysics Data System (ADS)

    Bunkheila, Federico; Ortore, Emiliano; Circi, Christian

    2016-06-01

    Taking advantage of the high manoeuvrability and the accurate pointing of the so-called agile satellites, an algorithm which allows efficient management of the operations concerning optical acquisitions is described. Fundamentally, this algorithm can be subdivided into two parts: in the first one the algorithm operates a geometric classification of the areas of interest and a partitioning of these areas into stripes which develop along the optimal scan directions; in the second one it computes the succession of the time windows in which the acquisition operations of the areas of interest are feasible, taking into consideration the potential restrictions associated with these operations and with the geometric and stereoscopic constraints. The results and the performances of the proposed algorithm have been determined and discussed considering the case of the Periodic Sun-Synchronous Orbits.

  15. Agile and dexterous robot for inspection and EOD operations

    NASA Astrophysics Data System (ADS)

    Handelman, David A.; Franken, Gordon H.; Komsuoglu, Haldun

    2010-04-01

    The All-Terrain Biped (ATB) robot is an unmanned ground vehicle with arms, legs and wheels designed to drive, crawl, walk and manipulate objects for inspection and explosive ordnance disposal tasks. This paper summarizes on-going development of the ATB platform. Control technology for semi-autonomous legged mobility and dual-arm dexterity is described as well as preliminary simulation and hardware test results. Performance goals include driving on flat terrain, crawling on steep terrain, walking on stairs, opening doors and grasping objects. Anticipated benefits of the adaptive mobility and dexterity of the ATB platform include increased robot agility and autonomy for EOD operations, reduced operator workload and reduced operator training and skill requirements.

  16. Dynamic tumor tracking using the Elekta Agility MLC

    SciTech Connect

    Fast, Martin F. Nill, Simeon Bedford, James L.; Oelfke, Uwe

    2014-11-01

    Purpose: To evaluate the performance of the Elekta Agility multileaf collimator (MLC) for dynamic real-time tumor tracking. Methods: The authors have developed a new control software which interfaces to the Agility MLC to dynamically program the movement of individual leaves, the dynamic leaf guides (DLGs), and the Y collimators (“jaws”) based on the actual target trajectory. A motion platform was used to perform dynamic tracking experiments with sinusoidal trajectories. The actual target positions reported by the motion platform at 20, 30, or 40 Hz were used as shift vectors for the MLC in beams-eye-view. The system latency of the MLC (i.e., the average latency comprising target device reporting latencies and MLC adjustment latency) and the geometric tracking accuracy were extracted from a sequence of MV portal images acquired during irradiation for the following treatment scenarios: leaf-only motion, jaw + leaf motion, and DLG + leaf motion. Results: The portal imager measurements indicated a clear dependence of the system latency on the target position reporting frequency. Deducting the effect of the target frequency, the leaf adjustment latency was measured to be 38 ± 3 ms for a maximum target speed v of 13 mm/s. The jaw + leaf adjustment latency was 53 ± 3 at a similar speed. The system latency at a target position frequency of 30 Hz was in the range of 56–61 ms for the leaves (v ≤ 31 mm/s), 71–78 ms for the jaw + leaf motion (v ≤ 25 mm/s), and 58–72 ms for the DLG + leaf motion (v ≤ 59 mm/s). The tracking accuracy showed a similar dependency on the target position frequency and the maximum target speed. For the leaves, the root-mean-squared error (RMSE) was between 0.6–1.5 mm depending on the maximum target speed. For the jaw + leaf (DLG + leaf) motion, the RMSE was between 0.7–1.5 mm (1.9–3.4 mm). Conclusions: The authors have measured the latency and geometric accuracy of the Agility MLC, facilitating its future use for clinical

  17. Frequency/phase agile microwave circuits on ferroelectric films

    NASA Astrophysics Data System (ADS)

    Romanofsky, Robert Raymond

    This work describes novel microwave circuits that can be tuned in either frequency or phase through the use of nonlinear dielectrics, specifically thin ferroelectric films. These frequency and phase agile circuits in many cases provide a new capability or offer the potential for lower cost alternatives in satellite and terrestrial communications and sensor applications. A brief introduction to nonlinear dielectrics and a summary of some of the special challenges confronting the practical insertion of ferroelectric technology into commercial systems is provided. A theoretical solution for the propagation characteristics of the multi-layer structures, with emphasis on a new type of phase shifter based on coupled microstrip, lines, is developed. The quasi-TEM analysis is based on a variational solution for line capacitance and an extension of coupled transmission line theory. It is shown that the theoretical model is applicable to a broad class of multi-layer transmission lines. The critical role that ferroelectric film thickness plays in loss and phase-shift is closely examined. Experimental data for both thin film BaxSr1-xTiO 3 phase shifters near room temperature and SMO3 phase shifters at cryogenic temperatures on MgO and LaAlO3 substrates is included. Some of these devices demonstrated an insertion loss of less than 5 dB at Ku-band with continuously variable phase shift in excess of 360 degrees. The performance of these devices is superior to the state-of-the-art semiconductor counterparts. Frequency and phase agile antenna prototypes including a microstrip patch that can operate at multiple microwave frequency bands and a new type of phased array antenna concept called the ferroelectric reflectarray are introduced. Modeled data for tunable microstrip patch antennas is presented for various ferroelectric film thickness. A prototype linear phased array, with a conventional beam-forming manifold, and an electronic controller is described. This is the first

  18. Process-Based Quality (PBQ) Tools Development

    SciTech Connect

    Cummins, J.L.

    2001-12-03

    The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

  19. Agile Data Curation: A conceptual framework and approach for practitioner data management

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Benedict, K. K.; Lenhardt, W. C.

    2015-12-01

    Data management occurs across a range of science and related activities such as decision-support. Exemplars within the science community operate data management systems that are extensively planned before implementation, staffed with robust data management expertise, equipped with appropriate services and technologies, and often highly structured. However, this is not the only approach to data management and almost certainly not the typical experience. The other end of the spectrum is often an ad hoc practitioner team, with changing requirements, limited training in data management, and resource constrained for both equipment and human resources. Much of the existing data management literature serves the exemplar community and ignores the ad hoc practitioners. Somewhere in the middle are examples where data are repurposed for new uses thereby generating new data management challenges. This submission presents a conceptualization of an Agile Data Curation approach that provides foundational principles for data management efforts operating across the spectrum of data generation and use from large science systems to efforts with constrained resources, limited expertise, and evolving requirements. The underlying principles to Agile Data Curation are a reapplication of agile software development principles to data management. The historical reality for many data management efforts is operating in a practioner environment so Agile Data Curation utilizes historical and current case studies to validate the foundational principles and through comparison learn lessons for future application. This submission will provide an overview of the Agile Data Curation, cover the foundational principles to the approach, and introduce a framework for gathering, classifying, and applying lessons from case studies of practitioner data management.

  20. ASRM process development in aqueous cleaning

    NASA Astrophysics Data System (ADS)

    Swisher, Bill

    1992-12-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  1. ASRM process development in aqueous cleaning

    NASA Technical Reports Server (NTRS)

    Swisher, Bill

    1992-01-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  2. Program Development and Evaluation: A Modeling Process.

    ERIC Educational Resources Information Center

    Green, Donald W.; Corgiat, RayLene

    A model of program development and evaluation was developed at Genesee Community College, utilizing a system theory/process of deductive and inductive reasoning to ensure coherence and continuity within the program. The model links activities to specific measurable outcomes. Evaluation checks and feedback are built in at various levels so that…

  3. The Cassini-Huygens Sequence Development Process

    NASA Technical Reports Server (NTRS)

    Long, Jennifer H.; Heventhal, William M., III; Javidnia, Shahram

    2006-01-01

    Each phase of the sequence development process had to overcome many operational challenges due to the immense complexity of the spacecraft, tour design, pointing capabilities, flight rules and software development. This paper will address the specific challenges related to each of those complexities and the methods used to overcome them during operation.

  4. Cognitive Process of Development in Children

    ERIC Educational Resources Information Center

    Boddington, Eulalee N.

    2009-01-01

    In this article we explored the theories of Arnold Gesell, Erik Erickson and Jean Piaget about how human beings development. In this component we will analyze the cognitive processes of how children perceive and develop, in particular children from a cross-cultural background. How learning takes place, and how the influences of culture, and…

  5. Preform Characterization in VARTM Process Model Development

    NASA Technical Reports Server (NTRS)

    Grimsley, Brian W.; Cano, Roberto J.; Hubert, Pascal; Loos, Alfred C.; Kellen, Charles B.; Jensen, Brian J.

    2004-01-01

    Vacuum-Assisted Resin Transfer Molding (VARTM) is a Liquid Composite Molding (LCM) process where both resin injection and fiber compaction are achieved under pressures of 101.3 kPa or less. Originally developed over a decade ago for marine composite fabrication, VARTM is now considered a viable process for the fabrication of aerospace composites (1,2). In order to optimize and further improve the process, a finite element analysis (FEA) process model is being developed to include the coupled phenomenon of resin flow, preform compaction and resin cure. The model input parameters are obtained from resin and fiber-preform characterization tests. In this study, the compaction behavior and the Darcy permeability of a commercially available carbon fabric are characterized. The resulting empirical model equations are input to the 3- Dimensional Infiltration, version 5 (3DINFILv.5) process model to simulate infiltration of a composite panel.

  6. Computer-aided software development process design

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Levary, Reuven R.

    1989-01-01

    The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

  7. An Examination of an Information Security Framework Implementation Based on Agile Values to Achieve Health Insurance Portability and Accountability Act Security Rule Compliance in an Academic Medical Center: The Thomas Jefferson University Case Study

    ERIC Educational Resources Information Center

    Reis, David W.

    2012-01-01

    Agile project management is most often examined in relation to software development, while information security frameworks are often examined with respect to certain risk management capabilities rather than in terms of successful implementation approaches. This dissertation extended the study of both Agile project management and information…

  8. The Automated Assembly Team contributions to the APRIMED Agile Manufacturing Project

    SciTech Connect

    Jones, R.E.; Ames, A.L.; Calton, T.L.

    1995-06-01

    The Automated Assembly Team of the APRIMED Project (abbreviated as A{prime}) consists of two parts: the Archimedes Project, which is an ongoing project developing automated assembly technology, and the A{prime} Robot Team. Archimedes is a second generation assembly planning system that both provides a general high-level assembly sequencing capability and, for a smaller class of products, facilitates automatic programming of a robotic workcell to assemble them. The A{prime} robot team designed, developed, and implemented a flexible robot workcell which served as the automated factory of the A{prime} project. In this document we briefly describe the role of automated assembly planning in agile manufacturing, and specifically describe the contributions of the Archimedes project and the A{prime} robot team to the A{prime} project. We introduce the concepts of the Archimedes automated assembly planning project, and discuss the enhancements to Archimedes which were developed in response to the needs of the A{prime} project. We also present the work of the A{prime} robot team in designing and developing the A{prime} robot workcell, including all tooling and programming to support assembly of the A{prime} discriminator devices. Finally, we discuss the process changes which these technologies have enabled in the A{prime} project.

  9. Reflections on Software Agility and Agile Methods: Challenges, Dilemmas, & the Way Ahead

    DTIC Science & Technology

    2005-05-11

    Mellon University 10 Research Team Richard Baskerville and Balasubramanian Ramesh Department of Computer Information Systems, Georgia State University...University 38 References Agile Manifesto. http://agilemanifesto.org/ Baskerville , R., Pries-Heje, J., Levine, L., & Ramesh, B. (2005). The high speed...balancing game: How software companies cope with Internet speed. Scandinavian Journal of Information Systems 16, 11-54. Baskerville , R., Levine, L

  10. Compact, flexible, frequency agile parametric wavelength converter

    DOEpatents

    Velsko, Stephan P.; Yang, Steven T.

    2002-01-01

    This improved Frequency Agile Optical Parametric Oscillator provides near on-axis pumping of a single QPMC with a tilted periodically poled grating to overcome the necessity to find a particular crystal that will permit collinear birefringence in order to obtain a desired tuning range. A tilted grating design and the elongation of the transverse profile of the pump beam in the angle tuning plane of the FA-OPO reduces the rate of change of the overlap between the pumped volume in the crystal and the resonated and non-resonated wave mode volumes as the pump beam angle is changed. A folded mirror set relays the pivot point for beam steering from a beam deflector to the center of the FA-OPO crystal. This reduces the footprint of the device by as much as a factor of two over that obtained when using the refractive telescope design.

  11. Process enhancements for negative tone development (NTD)

    NASA Astrophysics Data System (ADS)

    Noya, Go; Yamamoto, Kazuma; Matsumoto, Naoki; Takemura, Yukie; Ishii, Maki; Miyamoto, Yoshihiro; Ishii, Masahiro; Nagahara, Tatsuro; Pawlowski, Georg

    2013-03-01

    The negative tone development (NTD) process has proven benefits for superior imaging performance in 193nm lithography. Shrink materials, such as AZ® RELACS® have found widespread use as a resolution enhancement technology in conventional 248nm (DUV), 193 nm dry (ArF) and 193 nm immersion (ArFi) lithography. Surfactant rinses, such as AZ® FIRM® are employed as yield enhancement materials to improve the lithographic performance by avoiding pattern collapse, eliminating defects, and improving CDU. This paper describes the development and recent achievements obtained with new shrink and rinse materials for application in NTD patterning processes.

  12. Development of superplastic steel processing. Final report

    SciTech Connect

    Goldberg, A.

    1995-04-01

    Objective was to provide basis for producing, processing, and forming UHCS (ultrahigh carbon steel) on a commercial scale. Business plans were developed for potential commercialization. Effort was directed at improving the combination of flow stress and forming rates in UHCS alloys in order to make near net shape superplastic forming competitive; the result was the development of a series of UHCS alloys and processing, the selection of which depends on the specific requirements of the commercial application. Useful ancillary properties of these materials include: improved mechanical properties, wear resistance, and oxidation resistance at elevated temperatures.

  13. The Postnatal Development of Spinal Sensory Processing

    NASA Astrophysics Data System (ADS)

    Fitzgerald, Maria; Jennings, Ernest

    1999-07-01

    The mechanisms by which infants and children process pain should be viewed within the context of a developing sensory nervous system. The study of the neurophysiological properties and connectivity of sensory neurons in the developing spinal cord dorsal horn of the intact postnatal rat has shed light on the way in which the newborn central nervous system analyzes cutaneous innocuous and noxious stimuli. The receptive field properties and evoked activity of newborn dorsal horn cells to single repetitive and persistent innocuous and noxious inputs are developmentally regulated and reflect the maturation of excitatory transmission within the spinal cord. These changes will have an important influence on pain processing in the postnatal period.

  14. Development of modified FT (MFT) process

    SciTech Connect

    Jinglai Zhou; Zhixin Zhang; Wenjie Shen

    1995-12-31

    Two-Stage Modified FT (MFT) process has been developed for producing high-octane gasoline from coal-based syngas. The main R&D are focused on the development of catalysts and technologies process. Duration tests were finished in the single-tube reactor, pilot plant (100T/Y), and industrial demonstration plant (2000T/Y). A series of satisfactory results has been obtained in terms of operating reliability of equipments, performance of catalysts, purification of coal - based syngas, optimum operating conditions, properties of gasoline and economics etc. Further scaling - up commercial plant is being considered.

  15. Federated Process Framework in a Virtual Enterprise Using an Object-Oriented Database and Extensible Markup Language.

    ERIC Educational Resources Information Center

    Bae, Kyoung-Il; Kim, Jung-Hyun; Huh, Soon-Young

    2003-01-01

    Discusses process information sharing among participating organizations in a virtual enterprise and proposes a federated process framework and system architecture that provide a conceptual design for effective implementation of process information sharing supporting the autonomy and agility of the organizations. Develops the framework using an…

  16. GRB 070724B: the first Gamma Ray Burst localized by SuperAGILE

    SciTech Connect

    Del Monte, E.; Costa, E.; Donnarumma, I.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Soffitta, P.; Argan, A.; Pucella, G.; Trois, A.; Vittorini, V.; Evangelista, Y.; Rapisarda, M.; Barbiellini, G.; Longo, F.; Basset, M.; Foggetta, L.; Vallazza, E.; Bulgarelli, A.; Di Cocco, G.

    2008-05-22

    GRB070724B is the first Gamma Ray Burst localized by the SuperAGILE instrument aboard the AGILE space mission. The SuperAGILE localization has been confirmed after the after-glow observation by the XRT aboard the Swift satellite. No significant gamma ray emission above 50 MeV has been detected for this GRB. In this paper we describe the SuperAGILE capabilities in detecting Gamma Ray Burst and the AGILE observation of GRB 070724B.

  17. L2 Chinese: Grammatical Development and Processing

    ERIC Educational Resources Information Center

    Mai, Ziyin

    2016-01-01

    Two recent books (Jiang, 2014, "Advances in Chinese as a second language"; Wang, 2013, "Grammatical development of Chinese among non-native speakers") provide new resources for exploring the role of processing in acquiring Chinese as a second language (L2). This review article summarizes, assesses and compares some of the…

  18. Three Models for the Curriculum Development Process

    ERIC Educational Resources Information Center

    O'Hanlon, James

    1973-01-01

    Presents descriptions of the management, systematic, and open-access curriculum development models to identify the decisionmaking bases, operational processes, evaluation requirements, and curriculum control methods of each model. A possible relationship among these models is then suggested. (Author/DN)

  19. Developing Qualitative Research Questions: A Reflective Process

    ERIC Educational Resources Information Center

    Agee, Jane

    2009-01-01

    The reflective and interrogative processes required for developing effective qualitative research questions can give shape and direction to a study in ways that are often underestimated. Good research questions do not necessarily produce good research, but poorly conceived or constructed questions will likely create problems that affect all…

  20. Lexical Morphology: Structure, Process, and Development

    ERIC Educational Resources Information Center

    Jarmulowicz, Linda; Taran, Valentina L.

    2013-01-01

    Recent work has demonstrated the importance of derivational morphology to later language development and has led to a consensus that derivation is a lexical process. In this review, derivational morphology is discussed in terms of lexical representation models from both linguistic and psycholinguistic perspectives. Input characteristics, including…

  1. Clean, agile alternative binders, additives and plasticizers for propellant and explosive formulations

    SciTech Connect

    Hoffman, D.M.; Hawkins, T.W.; Lindsay, G.A.

    1994-12-01

    As part of the Strategic Environmental Research and Development Program (SERDP) a clean, agile manufacturing of explosives, propellants and pyrotechniques (CANPEP) effort set about to identify new approaches to materials and processes for producing propellants, explosives and pyrotechniques (PEP). The RDX based explosive PBXN-109 and gun propellant M-43 were identified as candidates for which waste minimization and recycling modifications might be implemented in a short time frame. The binders, additives and plasticizers subgroup identified cast non-curable thermoplastic elastomer (TPE) formulations as possible replacement candidates for these formulations. Paste extrudable explosives were also suggested as viable alternatives to PBXN-109. Commercial inert and energetic TPEs are reviewed. Biodegradable and hydrolyzable binders are discussed. The applicability of various types of explosive formulations are reviewed and some issues associated with implementation of recyclable formulations are identified. It is clear that some processing and weaponization modifications will need to be made if any of these approaches are to be implemented. The major advantages of formulations suggested here over PBXN-109 and M-43 is their reuse/recyclability. Formulations using TPE or Paste could by recovered from a generic bomb or propellant and reused if they met specification or easily reprocessed and sold to the mining industry.

  2. Process development for scum to biodiesel conversion.

    PubMed

    Bi, Chong-hao; Min, Min; Nie, Yong; Xie, Qing-long; Lu, Qian; Deng, Xiang-yuan; Anderson, Erik; Li, Dong; Chen, Paul; Ruan, Roger

    2015-06-01

    A novel process was developed for converting scum, a waste material from wastewater treatment facilities, to biodiesel. Scum is an oily waste that was skimmed from the surface of primary and secondary settling tanks in wastewater treatment plants. Currently scum is treated either by anaerobic digestion or landfilling which raised several environmental issues. The newly developed process used a six-step method to convert scum to biodiesel, a higher value product. A combination of acid washing and acid catalyzed esterification was developed to remove soap and impurities while converting free fatty acids to methyl esters. A glycerol washing was used to facilitate the separation of biodiesel and glycerin after base catalyzed transesterification. As a result, 70% of dried and filtered scum was converted to biodiesel which is equivalent to about 134,000 gallon biodiesel per year for the Saint Paul waste water treatment plant in Minnesota.

  3. Agile text mining for the 2014 i2b2/UTHealth Cardiac risk factors challenge.

    PubMed

    Cormack, James; Nath, Chinmoy; Milward, David; Raja, Kalpana; Jonnalagadda, Siddhartha R

    2015-12-01

    This paper describes the use of an agile text mining platform (Linguamatics' Interactive Information Extraction Platform, I2E) to extract document-level cardiac risk factors in patient records as defined in the i2b2/UTHealth 2014 challenge. The approach uses a data-driven rule-based methodology with the addition of a simple supervised classifier. We demonstrate that agile text mining allows for rapid optimization of extraction strategies, while post-processing can leverage annotation guidelines, corpus statistics and logic inferred from the gold standard data. We also show how data imbalance in a training set affects performance. Evaluation of this approach on the test data gave an F-Score of 91.7%, one percent behind the top performing system.

  4. Agile Text Mining for the 2014 i2b2/UTHealth Cardiac Risk Factors Challenge

    PubMed Central

    Cormack, James; Nath, Chinmoy; Milward, David; Raja, Kalpana; Jonnalagadda, Siddhartha R

    2016-01-01

    This paper describes the use of an agile text mining platform (Linguamatics’ Interactive Information Extraction Platform, I2E) to extract document-level cardiac risk factors in patient records as defined in the i2b2/UTHealth 2014 Challenge. The approach uses a data-driven rule-based methodology with the addition of a simple supervised classifier. We demonstrate that agile text mining allows for rapid optimization of extraction strategies, while post-processing can leverage annotation guidelines, corpus statistics and logic inferred from the gold standard data. We also show how data imbalance in a training set affects performance. Evaluation of this approach on the test data gave an F-Score of 91.7%, one percent behind the top performing system. PMID:26209007

  5. Development of enhanced sulfur rejection processes

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.; Adel, G.T.; Richardson, P.E.

    1996-03-01

    Research at Virginia Tech led to the development of two complementary concepts for improving the removal of inorganic sulfur from many eastern U.S. coals. These concepts are referred to as Electrochemically Enhanced Sulfur Rejection (EESR) and Polymer Enhanced Sulfur Rejection (PESR) processes. The EESR process uses electrochemical techniques to suppress the formation of hydrophobic oxidation products believed to be responsible for the floatability of coal pyrite. The PESR process uses polymeric reagents that react with pyrite and convert floatable middlings, i.e., composite particles composed of pyrite with coal inclusions, into hydrophilic particles. These new pyritic-sulfur rejection processes do not require significant modifications to existing coal preparation facilities, thereby enhancing their adoptability by the coal industry. It is believed that these processes can be used simultaneously to maximize the rejection of both well-liberated pyrite and composite coal-pyrite particles. The project was initiated on October 1, 1992 and all technical work has been completed. This report is based on the research carried out under Tasks 2-7 described in the project proposal. These tasks include Characterization, Electrochemical Studies, In Situ Monitoring of Reagent Adsorption on Pyrite, Bench Scale Testing of the EESR Process, Bench Scale Testing of the PESR Process, and Modeling and Simulation.

  6. Laterality and performance of agility-trained dogs.

    PubMed

    Siniscalchi, Marcello; Bertino, Daniele; Quaranta, Angelo

    2014-01-01

    Correlations between lateralised behaviour and performance were investigated in 19 agility-trained dogs (Canis familiaris) by scoring paw preference to hold a food object and relating it to performance during typical agility obstacles (jump/A-frame and weave poles). In addition, because recent behavioural studies reported that visual stimuli of emotional valence presented to one visual hemifield at a time affect visually guided motor responses in dogs, the possibility that the position of the owner respectively in the left and in the right canine visual hemifield might be associated with quality of performance during agility was considered. Dogs' temperament was also measured by an owner-rated questionnaire. The most relevant finding was that agility-trained dogs displayed longer latencies to complete the obstacles with the owner located in their left visual hemifield compared to the right. Interestingly, the results showed that this phenomenon was significantly linked to both dogs' trainability and the strength of paw preference.

  7. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse-to- pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent DIAL measurements in the field.

  8. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse to pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent Differential Absorption LIDAR (DIAL) measurements in the field.

  9. Process development of thin strip steel casting

    SciTech Connect

    Sussman, R.C.; Williams, R.S.

    1990-12-01

    An important new frontier is being opened in steel processing with the emergence of thin strip casting. Casting steel directly to thin strip has enormous benefits in energy savings by potentially eliminating the need for hot reduction in a hot strip mill. This has been the driving force for numerous current research efforts into the direct strip casting of steel. The US Department of Energy initiated a program to evaluate the development of thin strip casting in the steel industry. In earlier phases of this program, planar flow casting on an experimental caster was studied by a team of engineers from Westinghouse Electric corporation and Armco Inc. A subsequent research program was designed as a fundamental and developmental study of both planar and melt overflow casting processes. This study was arranged as several separate and distinct tasks which were often completed by different teams of researchers. An early task was to design and build a water model to study fluid flow through different designs of planar flow casting nozzles. Another important task was mathematically modeling of melt overflow casting process. A mathematical solidification model for the formation of the strip in the melt overflow process was written. A study of the material and conditioning of casting substrates was made on the small wheel caster using the melt overflow casting process. This report discusses work on the development of thin steel casting.

  10. Spectroscopic Investigation of Materials for Frequency Agile Laser Systems.

    DTIC Science & Technology

    1985-01-01

    fluorescence spectra and lifetimes of divalent Rh, Ru, Pt, and Ir ions in alkali halide crystals are measured using pulsed nitrogen laser excitation...AD-Ai5t 73t SPECTROSCOPIC INVESTIGRTION OF MATERIALS FOR FREQUENCY t/ AGILE LASER SYSTEMS(U) OKLAHOMA STATE UNIV STILLWATER DEPT OF PHYSICS R C...INVESTIGATION OF MATERIALS FOR FREQUENCY AGILE LASER SYSTEMS Richard C. Powell, Ph.D. Principal Investigator Department of Physics OKLAHOMA STATE UNIVERSITY

  11. Identification, Characterization, and Evaluation Criteria for Systems Engineering Agile Enablers

    DTIC Science & Technology

    2015-01-16

    monitoring communications in social media groups and websites (such as LinkedIn or Facebook groups associated with the Scaled Agile Framework, Lean... Identification , Characterization, and Evaluation Criteria for Systems Engineering Agile Enablers Technical Report SERC-2015-TR-049-1...currently valid OMB control number 1. REPORT DATE 16 JAN 2015 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Identification

  12. Need for Agility in Security Constraints for Distributed Simulation

    DTIC Science & Technology

    2014-06-01

    Submission to: 19th ICCRTS Title: Need for Agility in Security Constraints for Distributed Simulation (024) Topics: Primary Topic: 5...Modelling and Simulation , Alternates: 4. Experimentation, Metrics and Analysis, and 1. Concepts, Theory, and Policy S. K. Numrich, Ph.D...REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Need for Agility in Security Constraints for Distributed Simulation

  13. Light-Driven Chiral Molecular Motors for Passive Agile Filters

    DTIC Science & Technology

    2014-05-20

    AFRL-OSR-VA-TR-2014-0121 LIGHT-DRIVEN CHIRAL MOLECULAR MOTORS FOR PASSIVE AGILE FILTERS Quan Li KENT STATE UNIV OH Final Report 05/20/2014...Prescribed by ANSI Std. Z39.18 1 FINAL REPORT Title: Light-driven Chiral Molecular Motors for Passive Agile Filters AFOSR...As we proposed originally, the major objective of this project was to synthesize novel light- driven chiral molecular motors or switches targeted

  14. Development of a comprehensive weld process model

    SciTech Connect

    Radhakrishnan, B.; Zacharia, T.; Paul, A.

    1997-05-01

    This cooperative research and development agreement (CRADA) between Concurrent Technologies Corporation (CTC) and Lockheed Martin Energy Systems (LMES) combines CTC`s expertise in the welding area and that of LMES to develop computer models and simulation software for welding processes. This development is of significant impact to the industry, including materials producers and fabricators. The main thrust of the research effort was to develop a comprehensive welding simulation methodology. A substantial amount of work has been done by several researchers to numerically model several welding processes. The primary drawback of most of the existing models is the lack of sound linkages between the mechanistic aspects (e.g., heat transfer, fluid flow, and residual stress) and the metallurgical aspects (e.g., microstructure development and control). A comprehensive numerical model which can be used to elucidate the effect of welding parameters/conditions on the temperature distribution, weld pool shape and size, solidification behavior, and microstructure development, as well as stresses and distortion, does not exist. It was therefore imperative to develop a comprehensive model which would predict all of the above phenomena during welding. The CRADA built upon an already existing three-dimensional (3-D) welding simulation model which was developed by LMES which is capable of predicting weld pool shape and the temperature history in 3-d single-pass welds. However, the model does not account for multipass welds, microstructural evolution, distortion and residual stresses. Additionally, the model requires large resources of computing time, which limits its use for practical applications. To overcome this, CTC and LMES have developed through this CRADA the comprehensive welding simulation model described above.

  15. Autonomous, agile micro-satellites and supporting technologies

    SciTech Connect

    Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

    1999-07-19

    This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

  16. Increasing Flexibility and Agility at the National Reconnaissance Office: Lessons from Modular Design, Occupational Surprise, and Commercial Research and Development Processes

    DTIC Science & Technology

    2013-01-01

    by ANSI Std Z39-18 This report is part of the RAND Corporation research report series. RAND reports present research findings and objective analysis...Division (NSRD). NSRD conducts research and analy- sis on defense and national security topics for the U.S. and allied defense, foreign policy...innovation and creative thought achieve this? We looked at three companies suggested to us by NRO/AS&T: Pfizer, IBM, and Caterpillar . These

  17. Compact Process Development at Babcock & Wilcox

    SciTech Connect

    Eric Shaber; Jeffrey Phillips

    2012-03-01

    Multiple process approaches have been used historically to manufacture cylindrical nuclear fuel compacts. Scale-up of fuel compacting was required for the Next Generation Nuclear Plant (NGNP) project to achieve an economically viable automated production process capable of providing a minimum of 10 compacts/minute with high production yields. In addition, the scale-up effort was required to achieve matrix density equivalent to baseline historical production processes, and allow compacting at fuel packing fractions up to 46% by volume. The scale-up approach of jet milling, fluid-bed overcoating, and hot-press compacting adopted in the U.S. Advanced Gas Reactor (AGR) Fuel Development Program involves significant paradigm shifts to capitalize on distinct advantages in simplicity, yield, and elimination of mixed waste. A series of compaction trials have been completed to optimize compaction conditions of time, temperature, and forming pressure using natural uranium oxycarbide (NUCO) fuel at packing fractions exceeding 46% by volume. Results from these trials are included. The scale-up effort is nearing completion with the process installed and operable using nuclear fuel materials. Final process testing is in progress to certify the process for manufacture of qualification test fuel compacts in 2012.

  18. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  19. Advanced PPA Reactor and Process Development

    NASA Technical Reports Server (NTRS)

    Wheeler, Raymond; Aske, James; Abney, Morgan B.; Miller, Lee A.; Greenwood, Zachary

    2012-01-01

    Design and development of a second generation Plasma Pyrolysis Assembly (PPA) reactor is currently underway as part of NASA s Atmosphere Revitalization Resource Recovery effort. By recovering up to 75% of the hydrogen currently lost as methane in the Sabatier reactor effluent, the PPA helps to minimize life support resupply costs for extended duration missions. To date, second generation PPA development has demonstrated significant technology advancements over the first generation device by doubling the methane processing rate while, at the same time, more than halving the required power. One development area of particular interest to NASA system engineers is fouling of the PPA reactor with carbonaceous products. As a mitigation plan, NASA MSFC has explored the feasibility of using an oxidative plasma based upon metabolic CO2 to regenerate the reactor window and gas inlet ports. The results and implications of this testing are addressed along with the advanced PPA reactor development work.

  20. Development of the selective coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1992-07-01

    The selective hydrophobic coagulation (SHC) process is based on the recent finding that hydrophobic particles can be selectively coagulated without using traditional agglomerating agents or flocculants. The driving force for the coagulation is the attractive energy between hydrophobic surfaces, an interaction that has been overlooked in classical colloid chemistry. In most cases, selective separations can be achieved using simple pH control to disperse the mineral matter, followed by recovery of the coal coagula using techniques that take advantage of the size enlargement. In the present work, studies have been carried out to further investigate the fundamental mechanisms of the SHC process and the parameters that affect the process of separating coal from the ash-forming minerals and pyritic sulfur. Studies have included direct force measurements of the attractive interaction between model hydrophobic surfaces, in-situ measurements of the size distributions of coagula formed under a variety of operating conditions, and development of a population balance model to describe the coagulation process. An extended DLVO colloid stability model which includes a hydrophobic interaction energy term has also been developed to explain the findings obtained from the experimental studies. In addition to the fundamental studies, bench-scale process development test work has been performed to establish the best possible method of separating the coagula from dispersed mineral matter. Two types of separators, i.e., a sedimentation tank and a rotating drum screen, were examined in this study. The sedimentation tank proved to be the more efficient unit, achieving ash reductions as high as 60% in a single pass while recovering more than 90% of the combustible material. This device, which minimizes turbulence and coagula breakage, was used in subsequent test work to optimize design and operating parameters.

  1. Regulation & Development of Membrane Transport Processes.

    DTIC Science & Technology

    1985-05-15

    Laboratory, Oak Ridge, Tennessee DAVID W. PLMPLIN Department of Anatomy, University of Maryland School of Medicine, Baltimore, Maryland MARILYN D. RESH...Muscle 265 Douglas M. Fambrough, Barry A. Wolitzky, and David W. Pumplin Index 283 REGULATION AND DEVELOPMENT OF MEMBRANE TRANSPORT PROCESSES 77, II PART 1...243 (Cell Physiol. 12). C 124-C132. 16. Huang. C. C.. Tsai. C. M.. and Canellakis, E. S. (1973) Bochiom. Biophys. Acta. 332, 59-68. 17. Hume . S. and

  2. Effects of small-sided game and change-of-direction training on reactive agility and change-of-direction speed.

    PubMed

    Young, Warren; Rogers, Nathan

    2014-01-01

    The purpose of this study was to determine the effects of training change-of-direction speed and small-sided games on performance in the Planned-AFL agility test and reactive agility. Twenty-five elite-standard U-18 Australian Rules football players were randomly allocated either to a change-of-direction group or a small-sided games group. Players participated in one or two 15-min sessions per week with 11 sessions conducted over a 7-week period during the season. Tests conducted immediately before and after the training period included the Planned-AFL agility test and a video-based reactive agility test specific to Australian Rules football. The reactive agility test variables were total time, decision time and movement response time. The small-sided games group improved total time (P = 0.008, effect size = 0.93), which was entirely attributable to a very large reduction in decision time (P < 0.001, effect size = 2.32). Small-sided games produced a trivial change in movement response time as well as in the Planned-AFL agility test (P > 0.05). The change-of-direction training produced small to trivial changes in all of the test variables (P > 0.05, effect size = 0-0.2). The results suggest that small-sided games improve agility performance by enhancing the speed of decision-making rather than movement speed. The change-of-direction training was not effective for developing either change-of-direction speed as measured by the Planned-AFL test or reactive agility.

  3. Contribution of strength characteristics to change of direction and agility performance in female basketball athletes.

    PubMed

    Spiteri, Tania; Nimphius, Sophia; Hart, Nicolas H; Specos, Christina; Sheppard, Jeremy M; Newton, Robert U

    2014-09-01

    Research has often examined the relationship between 1 or 2 measures of strength and change of direction (COD) ability reporting inconsistent relationships to performance. These inconsistencies may be the result of the strength assessment used and the assumption that 1 measure of strength can represent all "types" of strength required during a COD task. Therefore the purpose of this study was to determine the relationship between several lower-body strength and power measures, COD, and agility performance. Twelve (n = 12) elite female basketball athletes completed a maximal dynamic back squat, isometric midthigh pull, eccentric and concentric only back squat, and a countermovement jump, followed by 2 COD tests (505 and T-test) and a reactive agility test. Pearson product-moment correlation and stepwise regression analysis were performed on all variables. The percentage contribution of each strength measure to an athletes total strength score was also determined. Our results demonstrated that both COD tests were significantly correlated to maximal dynamic, isometric, concentric, and eccentric strength (r = -0.79 to -0.89), with eccentric strength identified as the sole predictor of COD performance. Agility performance did not correlate with any measure of strength (r = -0.08 to -0.36), whereas lower-body power demonstrated no correlation to either agility or COD performance (r = -0.19 to -0.46). These findings demonstrate the importance of multiple strength components for COD ability, highlighting eccentric strength as a deterministic factor of COD performance. Coaches should aim to develop a well-rounded strength base in athletes; ensuring eccentric strength is developed as effectively as the often-emphasized concentric or overall dynamic strength capacity.

  4. Pyro-processing Technology Development in Japan

    SciTech Connect

    Inoue, Tadashi; Koyama, Tadafumi; Myochin, Munetaka; Arai, Yasuo

    2007-07-01

    Metal fuel cycle with pyro-processing technology has another potential different from oxide fuel cycle with aqueous process. In addition to the advantage of metal fuel fast reactor, such as achieving a high breeding ratio over 1.3, the pyro-processing with metal electrorefining expects that no additional process is required to separate minor actinides and no organic solvent that degrades by radiation and acid is utilized. 'Feasibility Study on Commercialized Fast Reactor (FR) Cycle Systems' in Japan selected the metal fuel fast reactor fuel cycle with metal-electrorefining as the sub-system for future development. CRIEPI has been involving on R and D of pyro-processing technology with metal-electrorefining since 1980's and followed JAERI, that orients to apply on the treatment of spent target with nitride fuel for ADS, and JNC, currently merged to JAEA, and, then, wider collaboration started among CRIEPI/JAERI/JNC. The series verification of process starting with MOX pellets have produced U-Pu alloy after distillation through reduction and electrorefining at the facility installed in Tokai, JAEA. The metal fuel fabrication has started from the stage of U-Pu alloy fabrication from UO{sub 2} and PuO{sub 2} mixture by electrochemical reduction, and currently succeeds to produce a fuel slag of U-Pu-Zr of 30 cm by injection casting in Oarai, JAEA. The alloys are scheduled to irradiate in JOYO fast reactor core. The development of engineering model of electro-refiner and electrochemical reduction device has successfully conducted by use of UO{sub 2} with kg scale. In addition to domestic R and Ds, pyro-processing verification with genuine material is proceeding in the joint study of CRIEPI/ITU. TRU is extracted into cadmium from chloride prepared from HLLW through denitration by reductive extraction in a caisson installed in a hot cell, and, then, electrorefining by use of PHENIX-irradiated metal fuel with minor actinides is scheduled. Thus, the R and D on pyro-processing

  5. The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator

    SciTech Connect

    Ge, Xingjun; Zhang, Jun; Zhong, Huihuang; Qian, Baoliang; Wang, Haitao

    2014-11-03

    The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator (RBWO) are presented. The operation frequency tuning can be easily achieved by merely altering the inner-conductor length. The key effects of the inner-conductor length contributing to the mechanical frequency tunability are investigated theoretically and experimentally. There is a specific inner-conductor length where the operation frequency can jump from one mode to another mode, which belongs to a different operation band. In addition, the operation frequency is tunable within each operation band. During simulation, the L-band microwave with a frequency of 1.61 GHz is radiated when the inner-conductor length is 39 cm. Meanwhile, the S-band microwave with a frequency of 2.32 GHz is radiated when the inner-conductor length is 5 cm. The frequency adjustment bandwidths of L-band and S-band are about 8.5% and 2%, respectively. Moreover, the online mechanical tunability process is described in detail. In the initial experiment, the generated microwave frequencies remain approximately 1.59 GHz and 2.35 GHz when the inner-conductor lengths are 39 cm and 5 cm. In brief, this technical route of the band-agile coaxial RBWO is feasible and provides a guide to design other types of band-agile high power microwaves sources.

  6. The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator

    NASA Astrophysics Data System (ADS)

    Ge, Xingjun; Zhang, Jun; Zhong, Huihuang; Qian, Baoliang; Wang, Haitao

    2014-11-01

    The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator (RBWO) are presented. The operation frequency tuning can be easily achieved by merely altering the inner-conductor length. The key effects of the inner-conductor length contributing to the mechanical frequency tunability are investigated theoretically and experimentally. There is a specific inner-conductor length where the operation frequency can jump from one mode to another mode, which belongs to a different operation band. In addition, the operation frequency is tunable within each operation band. During simulation, the L-band microwave with a frequency of 1.61 GHz is radiated when the inner-conductor length is 39 cm. Meanwhile, the S-band microwave with a frequency of 2.32 GHz is radiated when the inner-conductor length is 5 cm. The frequency adjustment bandwidths of L-band and S-band are about 8.5% and 2%, respectively. Moreover, the online mechanical tunability process is described in detail. In the initial experiment, the generated microwave frequencies remain approximately 1.59 GHz and 2.35 GHz when the inner-conductor lengths are 39 cm and 5 cm. In brief, this technical route of the band-agile coaxial RBWO is feasible and provides a guide to design other types of band-agile high power microwaves sources.

  7. "Agile" Battery Technology Transfer-Lessons Learnt

    NASA Astrophysics Data System (ADS)

    Sabatini, P.; Annoni, G.; Grossi, R.; Alia, Sergio; Reulier, David

    2008-09-01

    AGILE, the high energy astrophysics mission of the Italian Space Agency launched on April 23rd 2007, is the first LEO satellite to be powered by Saft's commercially available space qualified MPS176065 rechargeable lithium ion batteries.Saft and Carlo Gavazzi Space (CGS) have achieved a successful technology transfer replacing Ni-H2 batteries with high energy lithium ion batteries in a full speed program (4 months) and with a cost effective approach. The battery system comprises 2 x 24 Saft MPS176065 space qualified Li-ion cells in an 8s3p configuration (3 parallel arrays each composed by 8 series cell) with a nominal capacity of 2 x 480 Wh and an integral autonomous cell balancing system that ensures the maximum possible battery life.The MPS176065 space qualified cell is based on Saft's well proven MP series of prismatic rechargeable Li-ion batteries. It offers an extremely high capacity made possible by the stainless steel prismatic container that makes use of the volume which is otherwise lost when conventional cylindrical cells are packed together. A single prismatic cell has about 20% more volumetric energy density than an equivalent pack of cylindrical cells.

  8. Tubeless evaporation process development: Final report

    SciTech Connect

    Not Available

    1987-12-01

    A tubeless evaporation process which has the potential to combine the advantage of both evaporation and freezing processes, without their disadvantages is being developed. The TEP is capable of concentrating process solutions of such things as sugar, caustic soda, salt, sodium sulfate, black liquor from the pulp and paper industry, cooling tower blowdown, ''spent'' pickling liquor (sulfuric acid) from the steel industry, and nitric acid with potential energy savings of half to three-quarters of the energy required by conventional evaporators, with about half of the capital and maintenance cost. It has similar potential for the production of fresh water from seawater. The process uses working fluids (WF's) at their freezing point to effect direct contact heat exchange. The purpose of this project was to find additional and lower cost WF's in the laboratory, to obtain sizing information for the major equipment for an economic evaluation and a pilot plant design in a bench scale plant, and to perform the economic evaluation, and the pilot plant design and cost estimate. 6 refs., 37 figs., 7 tabs.

  9. Process development for cladding APT tungsten targets

    SciTech Connect

    Horner, M H; Barber, R; Dalder, E

    2000-11-27

    This report describes development of processes for cladding APT Target tungsten components with a thin layer (0.127-mm) of Alloy 718, Alloy 600 or 316L stainless steel alloy. The application requires that the cladding be thermally bonded to the tungsten in order to transfer heat generated in the tungsten volume to a surrounding coolant. High temperature diffusion bonding using the hot isostatic processing (HIP) technique was selected as the method for creating a metallurgical bond between pure tungsten tubes and rods and the cladding materials. Bonding studies using a uniaxially loaded vacuum hot press were conducted in preliminary experiments to determine acceptable time-temperature conditions for diffusion bonding. The results were successfully applied in cladding tungsten rods and tubes with these alloys. Temperatures 800-810 C were suitable for cladding tungsten with Alloy 600 and 316L stainless steel alloy, whereas tungsten was clad with Alloy 718 at 1020 C.

  10. Hybrid Sulfur Thermochemical Process Development Annual Report

    SciTech Connect

    Summers, William A.; Buckner, Melvin R.

    2005-07-21

    The Hybrid Sulfur (HyS) Thermochemical Process is a means of producing hydrogen via water-splitting through a combination of chemical reactions and electrochemistry. Energy is supplied to the system as high temperature heat (approximately 900 C) and electricity. Advanced nuclear reactors (Generation IV) or central solar receivers can be the source of the primary energy. Large-scale hydrogen production based on this process could be a major contributor to meeting the needs of a hydrogen economy. This project's objectives include optimization of the HyS process design, analysis of technical issues and concerns, creation of a development plan, and laboratory-scale proof-of-concept testing. The key component of the HyS Process is the SO2-depolarized electrolyzer (SDE). Studies were performed that showed that an electrolyzer operating in the range of 500-600 mV per cell can lead to an overall HyS cycle efficiency in excess of 50%, which is superior to all other currently proposed thermochemical cycles. Economic analysis indicated hydrogen production costs of approximately $1.60 per kilogram for a mature nuclear hydrogen production plant. However, in order to meet commercialization goals, the electrolyzer should be capable of operating at high current density, have a long operating lifetime , and have an acceptable capital cost. The use of proton-exchange-membrane (PEM) technology, which leverages work for the development of PEM fuel cells, was selected as the most promising route to meeting these goals. The major accomplishments of this project were the design and construction of a suitable electrolyzer test facility and the proof-of-concept testing of a PEM-based SDE.

  11. Wavelength-Agile Optical Sensor for Exhaust Plume and Cryogenic Fluid Interrogation

    NASA Technical Reports Server (NTRS)

    Sanders, Scott T.; Chiaverini, Martin J.; Gramer, Daniel J.

    2004-01-01

    Two optical sensors developed in UW-Madison labs were evaluated for their potential to characterize rocket engine exhaust plumes and liquid oxygen (LOX) fluid properties. The plume sensor is based on wavelength-agile absorption spectroscopy A device called a chirped white pulse emitter (CWPE) is used to generate the wavelength agile light, scanning, for example, 1340 - 1560 nm every microsecond. Properties of the gases in the rocket plume (for example temperature and water mole fraction) can be monitored using these wavelength scans. We have performed preliminary tests in static gas cells, a laboratory GOX/GH2 thrust chamber, and a solid-fuel hybrid thrust chamber, and these initial tests demonstrate the potential of the CWPE for monitoring rocket plumes. The LOX sensor uses an alternative to wavelength agile sensing: two independent, fixed-wavelength lasers are combined into a single fiber. One laser is absorbed by LOX and the other not: by monitoring the differential transmission the LOX concentration in cryogenic feed lines can be inferred. The sensor was successful in interrogating static LOX pools in laboratory tests. Even in ice- and bubble-laden cryogenic fluids, LOX concentrations were measured to better than 1% with a 3 microsec time constant.

  12. Visual preference in a human-reared agile gibbon (Hylobates agilis).

    PubMed

    Tanaka, Masayuki; Uchikoshi, Makiko

    2010-01-01

    Visual preference was evaluated in a male agile gibbon. The subject was raised by humans immediately after birth, but lived with his biological family from one year of age. Visual preference was assessed using a free-choice task in which five or six photographs of different primate species, including humans, were presented on a touch-sensitive screen. The subject touched one of them. Food rewards were delivered irrespective of the subject's responses. We prepared two types of stimulus sets. With set 1, the subject touched photographs of humans more frequently than those of other species, recalling previous findings in human-reared chimpanzees. With set 2, photographs of nine species of gibbons were presented. Chimpanzees touched photographs of white-handed gibbons more than those of other gibbon species. The gibbon subject initially touched photographs of agile gibbons more than white-handed gibbons, but after one and two years his choice patterns resembled the chimpanzees'. The results suggest that, as in chimpanzees, visual preferences of agile gibbons are not genetically programmed but develop through social experience during infancy.

  13. Process Developed for Forming Urethane Ice Models

    NASA Technical Reports Server (NTRS)

    Vannuyen, Thomas

    1998-01-01

    A new process for forming ice shapes on an aircraft wing was developed at the NASA Lewis Research Center. The innovative concept was formed by Lewis' Icing Research Tunnel (IRT) team, and the hardware was manufactured by Lewis' Manufacturing Engineering Division. This work was completed to increase our understanding of the stability and control of aircraft during icing conditions. This project will also enhance our evaluation of true aerodynamic wind tunnel effects on aircraft. In addition, it can be used as a design tool for evaluating ice protection systems.

  14. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The NASA/McDonnell Douglas Corporation (MDC) X-36 Tailless Fighter Agility Research Aircraft is steered to it's hangar at NASA Dryden Flight Research Center, Edwards, California, following arrival on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a

  15. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA and McDonnell Douglas Corporation (MDC) personnel wait to attach a hoist to the X-36 Tailless Fighter Agility Research Aircraft, which arrived at NASA Dryden Flight Research Center, Edwards, California, on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high

  16. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The NASA/McDonnell Douglas Corporation (MDC) X-36 Tailless Fighter Agility Research Aircraft in it's hangar at NASA Dryden Flight Research Center, Edwards, California, following its arrival on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a wingspan of

  17. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA and McDonnell Douglas Corporation (MDC) personnel remove protective covers from the newly arrived NASA/McDonnell Douglas Corporation X-36 Tailless Fighter Agility Research Aircraft. It arrived at NASA Dryden Flight Research Center, Edwards, California, on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1

  18. Skylab materials processing facility experiment developer's report

    NASA Technical Reports Server (NTRS)

    Parks, P. G.

    1975-01-01

    The development of the Skylab M512 Materials Processing Facility is traced from the design of a portable, self-contained electron beam welding system for terrestrial applications to the highly complex experiment system ultimately developed for three Skylab missions. The M512 experiment facility was designed to support six in-space experiments intended to explore the advantages of manufacturing materials in the near-zero-gravity environment of Earth orbit. Detailed descriptions of the M512 facility and related experiment hardware are provided, with discussions of hardware verification and man-machine interfaces included. An analysis of the operation of the facility and experiments during the three Skylab missions is presented, including discussions of the hardware performance, anomalies, and data returned to earth.

  19. Evidence development and publication planning: strategic process.

    PubMed

    Wittek, Michael R; Jo Williams, Mary; Carlson, Angeline M

    2009-11-01

    A number of decisions in the health care field rely heavily on published clinical evidence. A systematic approach to evidence development and publication planning is required to develop a portfolio of evidence that includes at minimum information on efficacy, safety, durability of effect, quality of life, and economic outcomes. The approach requires a critical assessment of available literature, identification of gaps in the literature, and a strategic plan to fill the gaps to ensure the availability of evidence demanded for clinical decisions, coverage/payment decisions and health technology assessments. The purpose of this manuscript is to offer a six-step strategic process leading to a portfolio of evidence that meets the informational needs of providers, payers, and governmental agencies concerning patient access to a therapy.

  20. Development of a Comprehensive Weld Process Model

    SciTech Connect

    Radhakrishnan, B.; Zacharia, T.

    1997-05-01

    This cooperative research and development agreement (CRADA) between Concurrent Technologies Corporation (CTC) and Lockheed Martin Energy Systems (LMES) combines CTC's expertise in the welding area and that of LMES to develop computer models and simulation software for welding processes. This development is of significant impact to the industry, including materials producers and fabricators. The main thrust of the research effort was to develop a comprehensive welding simulation methodology. A substantial amount of work has been done by several researchers to numerically model several welding processes. The primary drawback of most of the existing models is the lack of sound linkages between the mechanistic aspects (e.g., heat transfer, fluid flow, and residual stress) and the metallurgical aspects (e.g., microstructure development and control). A comprehensive numerical model which can be used to elucidate the effect of welding parameters/conditions on the temperature distribution, weld pool shape and size, solidification behavior, and microstructure development, as well as stresses and distortion, does not exist. It was therefore imperative to develop a comprehensive model which would predict all of the above phenomena during welding. The CRADA built upon an already existing three- dimensional (3-D) welding simulation model which was developed by LMES which is capable of predicting weld pool shape and the temperature history in 3-d single-pass welds. However, the model does not account for multipass welds, microstructural evolution, distortion and residual stresses. Additionally, the model requires large resources of computing time, which limits its use for practical applications. To overcome this, CTC and LMES have developed through this CRADA the comprehensive welding simulation model described above. The following technical tasks have been accomplished as part of the CRADA. 1. The LMES welding code has been ported to the Intel Paragon parallel computer at ORNL

  1. SBIR Grant:No-Vibration Agile Cryogenic Optical Refrigerator

    SciTech Connect

    Epstein, Richard

    2013-04-09

    Optical refrigeration is currently the only all-solid-state cryocooling technology that has been demonstrated. Optical cryocoolers are devices that use laser light to cool small crystal or glass cooling elements. The cooling element absorbs the laser light and reradiates it at higher energy, an example of anti-Stokes fluorescence. The dif-ference between the energy of the outgoing and incoming light comes from the thermal energy of the cooling element, which in turn becomes colder. Entitled No-Vibration Agile Cryocoolers using Optical Refrigeration, this Phase I proposal directly addressed the continued development of the optical refrigerator components necessary to transition this scientific breakthrough into National Nu-clear Security Administration (NNSA) sensor applications in line with the objectives of topic 50b. ThermoDynamic Films LLC (TDF), in collaboration with the University of New Mexico (UNM), cooled an optical-refrigerator cooling element comprised of an ytterbium-doped yttrium lithium fluoride (Yb:YLF) crystal from room tempera-ture to 123 K with about 2% efficiency. This is the world record in optical refrigera-tion and an important step toward revolutionizing cryogenic systems for sensor ap-plications. During this period, they also designed and analyzed the crucial elements of a prototype optical refrigerator including the thermal link that connects the cool-ing element with the load.

  2. Development of the SOFIA Image Processing Tool

    NASA Technical Reports Server (NTRS)

    Adams, Alexander N.

    2011-01-01

    The Stratospheric Observatory for Infrared Astronomy (SOFIA) is a Boeing 747SP carrying a 2.5 meter infrared telescope capable of operating between at altitudes of between twelve and fourteen kilometers, which is above more than 99 percent of the water vapor in the atmosphere. The ability to make observations above most water vapor coupled with the ability to make observations from anywhere, anytime, make SOFIA one of the world s premiere infrared observatories. SOFIA uses three visible light CCD imagers to assist in pointing the telescope. The data from these imagers is stored in archive files as is housekeeping data, which contains information such as boresight and area of interest locations. A tool that could both extract and process data from the archive files was developed.

  3. Developing processing techniques for Skylab data

    NASA Technical Reports Server (NTRS)

    Nalepka, R. F. (Principal Investigator); Malila, W. A.; Morgenstern, J. P.

    1975-01-01

    The author has identified the following significant results. The effects of misregistration and the scan-line-straightening algorithm on multispectral data were found to be: (1) there is greatly increased misregistration in scan-line-straightening data over conic data; (2) scanner caused misregistration between any pairs of channels may not be corrected for in scan-line-straightened data; and (3) this data will have few pure field center pixels than will conic data. A program SIMSIG was developed implementing the signature simulation model. Data processing stages of the experiment were carried out, and an analysis was made of the effects of spatial misregistration on field center classification accuracy. Fifteen signatures originally used for classifying the data were analyzed, showing the following breakdown: corn (4 signatures), trees (2), brush (1), grasses, weeds, etc. (5), bare soil (1), soybeans (1), and alfalfa (1).

  4. Development of the LICADO coal cleaning process

    SciTech Connect

    Not Available

    1990-07-31

    Development of the liquid carbon dioxide process for the cleaning of coal was performed in batch, variable volume (semi-continuous), and continuous tests. Continuous operation at feed rates up to 4.5 kg/hr (10-lb/hr) was achieved with the Continuous System. Coals tested included Upper Freeport, Pittsburgh, Illinois No. 6, and Middle Kittanning seams. Results showed that the ash and pyrite rejections agreed closely with washability data for each coal at the particle size tested (-200 mesh). A 0.91 metric ton (1-ton) per hour Proof-of-Concept Plant was conceptually designed. A 181 metric ton (200 ton) per hour and a 45 metric ton (50 ton) per hour plant were sized sufficiently to estimate costs for economic analyses. The processing costs for the 181 metric ton (200 ton) per hour and 45 metric ton (50 ton) per hour were estimated to be $18.96 per metric ton ($17.20 per ton) and $11.47 per metric ton ($10.40 per ton), respectively for these size plants. The costs for the 45 metric ton per hour plant are lower because it is assumed to be a fines recovery plant which does not require a grinding circuit of complex waste handling system.

  5. Pathways to agility in the production of neutron generators

    SciTech Connect

    Stoltz, R.E.; Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W.

    1994-02-01

    This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

  6. FODEM: A Multi-Threaded Research and Development Method for Educational Technology

    ERIC Educational Resources Information Center

    Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

    2012-01-01

    Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

  7. Herschel Data Processing Development: 10 Years After

    NASA Astrophysics Data System (ADS)

    Ott, S.

    2013-10-01

    The Herschel Space Observatory, the fourth cornerstone mission in the ESA science program, was launched on the 14th of May 2009. As a cryogenic mission Herschel's operational lifetime is consumable-limited by its supply of liquid helium, estimated to be depleted by March 2013. Afterwards the mission will start a 4.75 year long post-operations phase. Originally it was considered sufficient to provide astronomers with raw data and software tools to carry out a basic data reduction, and no “data products” were to be generated and delivered. Following the realisation that the expectations of the astronomical community on the deliverables of an observatory mission evolved it was agreed to implement a single ‘cradle to grave’ data analysis system supporting the needs of all users for the whole project cycle. We will summarise the lessons learned during those ten years of Herschel data processing development, address the main challenges of this major software development project, and reflect on what went well, what needed to be adapted, and our open points.

  8. Development of relational memory processes in monkeys.

    PubMed

    Alvarado, Maria C; Malkova, Ludise; Bachevalier, Jocelyne

    2016-12-01

    The present study tested whether relational memory processes, as measured by the transverse patterning problem, are late-developing in nonhuman primates as they are in humans. Eighteen macaques ranging from 3 to 36 months of age, were trained to solve a set of visual discriminations that formed the transverse patterning problem. Subjects were trained at 3, 4-6, 12, 15-24 or 36 months of age to solve three discriminations as follows: 1) A+ vs. B-; 2) B+ vs. C-; 3) C+ vs. A. When trained concurrently, subjects must adopt a relational strategy to perform accurately on all three problems. All 36 month old monkeys reached the criterion of 90% correct, but only one 24-month-old and one 15-month-old did, initially. Three-month-old infants performed at chance on all problems. Six and 12-month-olds performed at 75-80% correct but used a 'linear' or elemental solution (e.g. A>B>C), which only yields correct performance on two problems. Retraining the younger subjects at 12, 24 or 36 months yielded a quantitative improvement on speed of learning, and a qualitative improvement in 24-36 month old monkeys for learning strategy. The results suggest that nonspatial relational memory develops late in macaques (as in humans), maturing between 15 and 24 months of age.

  9. Anthropometric factors related to sprint and agility performance in young male soccer players

    PubMed Central

    Mathisen, Gunnar; Pettersen, Svein Arne

    2015-01-01

    Objective To investigate the relationship between anthropometrics and sprint and agility performance and describe the development of sprint (acceleration) and agility performance in 10- to 16-year-old male soccer players. Methods One hundred and thirty-two participants were divided into three age groups, 10–12 years (mean 10.8±0.50), 13–14 years (mean 13.9±0.50), and 15–16 years (mean 15.5±0.24), with assessment of 20 m sprint with 10 m split time and agility performance related to body height and body mass within groups. Results In the 10- to 12-year-olds, there were no significant correlations between height, weight, and the performance variables, except for body mass, which was correlated to 10–20 m sprint (r=0.30). In the 13- to 14-year-olds, body height was significantly correlated with 10 m sprint (r=0.50) and 20 m sprint (r=0.52), as well as 10–20 m sprint (r=0.50) and agility performance (r=0.28). In the 15- to 16-year-old group, body height was correlated to 20 m (r=0.38) and 10–20 m (r=0.45) sprint. Body mass was significantly correlated to 10 m spring (r=0.35) in the 13- to 14-year-olds, as well as 20 m (r=0.33) and 10–20 m (r=0.35) sprint in the 15- to 16-year-olds. Conclusion Height and body mass were significantly correlated with sprint performance in 13- to 16-year-old male soccer players. However, the 10- to 12-year-olds showed no significant relationship between sprint performance and anthropometrics, except for a small correlation in 10–20 m sprint. This may be attributed to maturation, with large differences in body height and body mass due to different patterns in the growth spurt. The agility performance related to anthropometrics was insignificant apart from a moderate correlation in the 13- to 14-year-olds. PMID:26604842

  10. Technology Transfer and the Product Development Process

    SciTech Connect

    Mock, John E.

    1989-03-21

    It is my pleasure this morning to address a topic that is much talked about in passing but rarely examined from a first person point of view. That topic is Technology Transfer. Over the next 30 minutes I'd like to approach Technology Transfer within the context of the Product Development Process looking at it from the perspectives of the federal government researcher and the industry manufacturer/user. Fist let us recognize that we are living in an ''Information Age'', where global economic and military competition is determined as much by technology as it is by natural resource assets. It is estimated that technical/scientific information is presently growing at a rate of l3 percent per year; this is expected to increase to 30 percent per year by the turn of the century. In fact, something like 90 percent of all scientific knowledge has been generated in the last 30 years; this pool will double again in the next 10-15 years (Exhibit 1). Of all the scientists and engineers throughout history, 90% live and work in the present time. Successfully managing this technical information/knowledge--i.e., transforming the results of R&D to practical applications--will be an important measure of national strength. A little over a dozen years ago, the United States with only 5 percent of the world's population was generating approximately 75 percent of the world's technology. The US. share is now 50 percent and may decline to 30 percent by the turn of the century. This decline won't be because of downturn in U.S. technological advances but because the other 95 percent of the world's population will be increasing its contribution. Economic and military strength then, will be determined by how quickly and successfully companies, industries, and nations can apply new technological information to practical applications--i.e., how they manage technology transfer within the context of the product development process. Much discussion and pronouncements are ongoing in public forums

  11. The AGILE Mission and Gamma-Ray Bursts

    SciTech Connect

    Longo, Francesco; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-05-01

    The AGILE Mission will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational at the beginning of 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources, Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV. The broadband detection of GRBs and the study of implications for particle acceleration and high energy emission are primary goals of the mission. AGILE can image GRBs with 2-3 arcminute error boxes in the hard X-ray range, and provide broadband photon-by photon detection in the 15-45 keV, 03-50 MeV, and 30 MeV-30 GeV energy ranges. Microsecond on-board photon tagging and a {approx} 100 microsecond gamma-ray detection deadtime will be crucial for fast GRB timing. On-board calculated GRB coordinates and energy fluxes will be quickly transmitted to the ground by an ORBCOMM transceiver. AGILE is now (January 2007) undergoing final satellite integration and testing. The PLS V launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  12. Biorobotics: using robots to emulate and investigate agile locomotion.

    PubMed

    Ijspeert, Auke J

    2014-10-10

    The graceful and agile movements of animals are difficult to analyze and emulate because locomotion is the result of a complex interplay of many components: the central and peripheral nervous systems, the musculoskeletal system, and the environment. The goals of biorobotics are to take inspiration from biological principles to design robots that match the agility of animals, and to use robots as scientific tools to investigate animal adaptive behavior. Used as physical models, biorobots contribute to hypothesis testing in fields such as hydrodynamics, biomechanics, neuroscience, and prosthetics. Their use may contribute to the design of prosthetic devices that more closely take human locomotion principles into account.

  13. Development of a reburning boiler process model

    SciTech Connect

    Wu, K.T.

    1992-01-30

    The overall objective of this program is to integrate EER's expertise in boiler reburning performance evaluation into a package of analytical computer tools. Specific objectives of the program are to develop a computational capability with the following features: (1) can be used to predict the impact of gas reburning application on thermal conditions in the boiler radiant furnace, and on overall boiler performance; (2) can estimate gas reburning NO{sub x} reduction effectiveness based on specific reburning configurations and furnace/boiler configurations; (3) can be used as an analytical tool to evaluate the impact of boiler process parameters (e.g., fuel switching and changes in boiler operating conditions) on boiler thermal performance; (4) is adaptable to most boiler designs (tangential and wall fire boilers) and a variety of fuels (solid, liquid, gaseous and slurried fuels); (5) is sufficiently user friendly to be exercisable by engineers with a reasonable knowledge of boilers, and with reasonable computer skills. Here, user friendly'' means that the user will be guided by computer codes during the course of setting up individual input files for the boiler performance model.

  14. Model development for naphthenic acids ozonation process.

    PubMed

    Al Jibouri, Ali Kamel H; Wu, Jiangning

    2015-02-01

    Naphthenic acids (NAs) are toxic constituents of oil sands process-affected water (OSPW) which is generated during the extraction of bitumen from oil sands. NAs consist mainly of carboxylic acids which are generally biorefractory. For the treatment of OSPW, ozonation is a very beneficial method. It can significantly reduce the concentration of NAs and it can also convert NAs from biorefractory to biodegradable. In this study, a factorial design (2(4)) was used for the ozonation of OSPW to study the influences of the operating parameters (ozone concentration, oxygen/ozone flow rate, pH, and mixing) on the removal of a model NAs in a semi-batch reactor. It was found that ozone concentration had the most significant effect on the NAs concentration compared to other parameters. An empirical model was developed to correlate the concentration of NAs with ozone concentration, oxygen/ozone flow rate, and pH. In addition, a theoretical analysis was conducted to gain the insight into the relationship between the removal of NAs and the operating parameters.

  15. ON DEVELOPING CLEANER ORGANIC UNIT PROCESSES

    EPA Science Inventory

    Organic waste products, potentially harmful to the human health and the environment, are primarily produced in the synthesis stage of manufacturing processes. Many such synthetic unit processes, such as halogenation, oxidation, alkylation, nitration, and sulfonation are common to...

  16. BENCH SCALE SALTSTONE PROCESS DEVELOPMENT MIXING STUDY

    SciTech Connect

    Cozzi, A.; Hansen, E.

    2011-08-03

    The Savannah River National Laboratory (SRNL) was requested to develop a bench scale test facility, using a mixer, transfer pump, and transfer line to determine the impact of conveying the grout through the transfer lines to the vault on grout properties. Bench scale testing focused on the effect the transfer line has on the rheological property of the grout as it was processed through the transfer line. Rheological and other physical properties of grout samples were obtained prior to and after pumping through a transfer line. The Bench Scale Mixing Rig (BSMR) consisted of two mixing tanks, grout feed tank, transfer pump and transfer hose. The mixing tanks were used to batch the grout which was then transferred into the grout feed tank. The contents of the feed tank were then pumped through the transfer line (hose) using a progressive cavity pump. The grout flow rate and pump discharge pressure were monitored. Four sampling stations were located along the length of the transfer line at the 5, 105 and 205 feet past the transfer pump and at 305 feet, the discharge of the hose. Scaling between the full scale piping at Saltstone to bench scale testing at SRNL was performed by maintaining the same shear rate and total shear at the wall of the transfer line. The results of scaling down resulted in a shorter transfer line, a lower average velocity, the same transfer time and similar pressure drops. The condition of flow in the bench scale transfer line is laminar. The flow in the full scale pipe is in the transition region, but is more laminar than turbulent. The resulting plug in laminar flow in the bench scale results in a region of no-mixing. Hence mixing, or shearing, at the bench scale should be less than that observed in the full scale, where this plug is non existent due to the turbulent flow. The bench scale tests should be considered to be conservative due to the highly laminar condition of flow that exists. Two BSMR runs were performed. In both cases, wall

  17. Laboratory directed research and development final report: Intelligent tools for on-machine acceptance of precision machined components

    SciTech Connect

    Christensen, N.G.; Harwell, L.D.; Hazelton, A.

    1997-02-01

    On-Machine Acceptance (OMA) is an agile manufacturing concept being developed for machine tools at SNL. The concept behind OMA is the integration of product design, fabrication, and qualification processes by using the machining center as a fabrication and inspection tool. This report documents the final results of a Laboratory Directed Research and Development effort to qualify OMA.

  18. Considerations for Using Agile in DoD Acquisition

    DTIC Science & Technology

    2010-04-01

    Buettner, Aerospace Joe Tatem, Raytheon Stephany Bellomo, SEI Nanette Brown, SEI John Foreman, SEI Dr. John Goodenough, SEI Harry Levinson, SEI...event_details.php?id=452 [2] H. Glazer, J. Dalton, D. Anderson, M. Konrad , and S. Shrum, "CMMI or Agile: Why Not Embrace Both," Carnegie Mellon

  19. Correlation between agility and sprinting according to student age.

    PubMed

    Yanci, Javier; Los Arcos, Asier; Grande, Ignacio; Gil, Eneko; Cámara, Jesús

    2014-06-01

    The purposes of the study were to assess sprinting and agility performance characteristics and to determine the relationship between these two motor skills in elementary education students. Sprinting and agility performance were assessed in 176 children (88 boys and 88 girls) divided into three groups: Group 1 (G1, N = 98; 48 boys and 50 girls), from the first year of elementary education; Group 2 (G2, N = 38; 15 boys and 23 girls), from the second year of elementary education; Group 3 (G3, N = 40; 25 boys and 15 girls), from the third year of elementary education. Significant differences (p < 0.001) were found in agility ability among the groups and between G1-G3 and G2-G3 in the 5 and 15 m sprint. Regarding gender of the students of the same age, significant differences (p < 0.001) between boys and girls in group G1 and G2 were obtained in the 5 and 15 m sprint. The correlation between agility and acceleration was significant but moderate (0.3 < r < 0.7) in all groups (G1, G2, and G3), in most cases. When the gender factor was included, the results were heterogeneous. Assessing this correlation according to age and gender produced heterogeneous results. For this reason, we think that both are independent qualities and that age and gender are two factors that influence the correlation results.

  20. Agile Bodies: A New Imperative in Neoliberal Governance

    ERIC Educational Resources Information Center

    Gillies, Donald

    2011-01-01

    Modern business discourse suggests that a key bulwark against market fluctuation and the threat of failure is for organizations to become "agile'", a more dynamic and proactive position than that previously afforded by mere "flexibility". The same idea is also directed at the personal level, it being argued that the…

  1. Simulation Modeling of Software Development Processes

    NASA Technical Reports Server (NTRS)

    Calavaro, G. F.; Basili, V. R.; Iazeolla, G.

    1996-01-01

    A simulation modeling approach is proposed for the prediction of software process productivity indices, such as cost and time-to-market, and the sensitivity analysis of such indices to changes in the organization parameters and user requirements. The approach uses a timed Petri Net and Object Oriented top-down model specification. Results demonstrate the model representativeness, and its usefulness in verifying process conformance to expectations, and in performing continuous process improvement and optimization.

  2. Metric Development for Continuous Process Improvement

    DTIC Science & Technology

    2011-03-01

    by Dr. Eliyahu M. Goldratt , is based on the idea that quality and productivity will increase if various constraints are removed. The philosophy...management processes, such as outdated policies or procedures ( Goldratt , 1992). TOC uses a six-step process to enable ongoing improvement: 1...York: McGraw-Hill, 2002. Print. 22. Goldratt , Eliyahu M., and Jeff Cox. The goal: a process of ongoing improvement. 2nd rev. ed. Great Barrington

  3. Array Databases: Agile Analytics (not just) for the Earth Sciences

    NASA Astrophysics Data System (ADS)

    Baumann, P.; Misev, D.

    2015-12-01

    Gridded data, such as images, image timeseries, and climate datacubes, today are managed separately from the metadata, and with different, restricted retrieval capabilities. While databases are good at metadata modelled in tables, XML hierarchies, or RDF graphs, they traditionally do not support multi-dimensional arrays.This gap is being closed by Array Databases, pioneered by the scalable rasdaman ("raster data manager") array engine. Its declarative query language, rasql, extends SQL with array operators which are optimized and parallelized on server side. Installations can easily be mashed up securely, thereby enabling large-scale location-transparent query processing in federations. Domain experts value the integration with their commonly used tools leading to a quick learning curve.Earth, Space, and Life sciences, but also Social sciences as well as business have massive amounts of data and complex analysis challenges that are answered by rasdaman. As of today, rasdaman is mature and in operational use on hundreds of Terabytes of timeseries datacubes, with transparent query distribution across more than 1,000 nodes. Additionally, its concepts have shaped international Big Data standards in the field, including the forthcoming array extension to ISO SQL, many of which are supported by both open-source and commercial systems meantime. In the geo field, rasdaman is reference implementation for the Open Geospatial Consortium (OGC) Big Data standard, WCS, now also under adoption by ISO. Further, rasdaman is in the final stage of OSGeo incubation.In this contribution we present array queries a la rasdaman, describe the architecture and novel optimization and parallelization techniques introduced in 2015, and put this in context of the intercontinental EarthServer initiative which utilizes rasdaman for enabling agile analytics on Petascale datacubes.

  4. How To Develop an Effective Budget Process.

    ERIC Educational Resources Information Center

    Chabotar, Kent John

    1999-01-01

    An effective college or university budget process is dependent on the culture of the institution. Different processes and budget types are appropriate to different institutions. Understanding the interrelationships of budgeting, planning, and financial modeling can help make the budget more predictable and relevant to the college's values and…

  5. Developing Cultural Differences in Face Processing

    ERIC Educational Resources Information Center

    Kelly, David J.; Liu, Shaoying; Rodger, Helen; Miellet, Sebastien; Ge, Liezhong; Caldara, Roberto

    2011-01-01

    Perception and eye movements are affected by culture. Adults from Eastern societies (e.g. China) display a disposition to process information "holistically," whereas individuals from Western societies (e.g. Britain) process information "analytically." Recently, this pattern of cultural differences has been extended to face…

  6. Process development for economical processing of various vanadium bearing materials

    NASA Astrophysics Data System (ADS)

    Retelsdorf, H. J.; Rothmann, H.; Fichte, R.

    1982-06-01

    Three different vanadium bearing products were tested. It was proven feasible to recover a ferroalloy containing 73.5% of the vanadium contained in the leaching residues from blast furnace slags by reduction in an electric arc furnace. The composition of the obtained ferroalloy was 67% Fe, 2% V, 7% Cr, and 5.5% C. The vanadium recovery contained 0.5 to 6% in the fly ash, resulting from the combustion of fuel. Different fly ashes were tested by oxidation through roasting and subsequent basic leaching, or by reduction roasting with subsequent acid leaching, or bysoda roasting and leaching. The third source of vanadium tested was the waste salt, originating in alumina production, and containing about 4% V, 5% P, and 0.5% As. It was possible to produce a ferroalloy containing V2O5 and a secondary sodium phosphate, which could be applied in the phosphate processing industry.

  7. School Site Staff Development: Structures and Processes.

    ERIC Educational Resources Information Center

    Solo, Leonard J.

    1985-01-01

    Analyzes the importance of staff development (broadly defined as anything that enables teachers to learn) and considers different development structures. Describes the role and duties of staff developer at a Cambridge, Massachusetts, elementary school as well as its "teacher teams," groups of instructors who meet monthly to discuss…

  8. Organizational Agility and Complex Enterprise System Innovations: A Mixed Methods Study of the Effects of Enterprise Systems on Organizational Agility

    ERIC Educational Resources Information Center

    Kharabe, Amol T.

    2012-01-01

    Over the last two decades, firms have operated in "increasingly" accelerated "high-velocity" dynamic markets, which require them to become "agile." During the same time frame, firms have increasingly deployed complex enterprise systems--large-scale packaged software "innovations" that integrate and automate…

  9. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The tailless X-36 technology demonstrator research aircraft cruises over the California desert at low altitude during a 1997 research flight. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a wingspan of just over 10 feet. A Williams International F112 turbofan engine

  10. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The X-36 technology demonstrator shows off its distinctive shape as the remotely piloted aircraft flies a research mission over the Southern California desert on October 30, 1997. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a wingspan of just over 10 feet. A Williams

  11. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The lack of a vertical tail on the X-36 technology demonstrator is evident as the remotely piloted aircraft flies a low-altitude research flight above Rogers Dry Lake at Edwards Air Force Base in the California desert on October 30, 1997. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three

  12. An agile acquisition decision-support workbench for evaluating ISR effectiveness

    NASA Astrophysics Data System (ADS)

    Stouch, Daniel W.; Champagne, Valerie; Mow, Christopher; Rosenberg, Brad; Serrin, Joshua

    2011-06-01

    The U.S. Air Force is consistently evolving to support current and future operations through the planning and execution of intelligence, surveillance and reconnaissance (ISR) missions. However, it is a challenge to maintain a precise awareness of current and emerging ISR capabilities to properly prepare for future conflicts. We present a decisionsupport tool for acquisition managers to empirically compare ISR capabilities and approaches to employing them, thereby enabling the DoD to acquire ISR platforms and sensors that provide the greatest return on investment. We have developed an analysis environment to perform modeling and simulation-based experiments to objectively compare alternatives. First, the analyst specifies an operational scenario for an area of operations by providing terrain and threat information; a set of nominated collections; sensor and platform capabilities; and processing, exploitation, and dissemination (PED) capacities. Next, the analyst selects and configures ISR collection strategies to generate collection plans. The analyst then defines customizable measures of effectiveness or performance to compute during the experiment. Finally, the analyst empirically compares the efficacy of each solution and generates concise reports to document their conclusions, providing traceable evidence for acquisition decisions. Our capability demonstrates the utility of using a workbench environment for analysts to design and run experiments. Crafting impartial metrics enables the acquisition manager to focus on evaluating solutions based on specific military needs. Finally, the metric and collection plan visualizations provide an intuitive understanding of the suitability of particular solutions. This facilitates a more agile acquisition strategy that handles rapidly changing technology in response to current military needs.

  13. IMPROVING INDUSTRIAL WASTEWATER TREATMENT PROCESS RELIABILITY TO ENHANCE SUSTAINABLE DEVELOPMENT

    EPA Science Inventory

    Sustainable development includes the recovery of resources from industrial manufacturing processes. One valuable resource that can often be purified and reused is process wastewater. Typically, pollutants are removed from process wastewater using physical, chemical, and biologica...

  14. Laboratory Activities for Developing Process Skills.

    ERIC Educational Resources Information Center

    Institute for Services to Education, Inc., Washington, DC.

    This workbook contains laboratory exercises designed for use in a college introductory biology course. Each exercise helps the student develop a basic science skill. The exercises are arranged in a hierarchical sequence suggesting the scientific method. Each skill facilitates the development of succeeding ones. Activities include Use of the…

  15. Developing academic writing skills: the PROCESS framework.

    PubMed

    Lloyd, Marjorie

    Academic writing is an important aspect of professional development for students and lecturers. It is one way in which they demonstrate their learning, but it can be a difficult skill to master. This article aims to enable students and professionals to develop their academic writing style using a coherent and effective framework.

  16. Development of a solvent processed insensitive propellant

    NASA Technical Reports Server (NTRS)

    Trask, R.; Costa, E.; Beardell, A. J.

    1980-01-01

    Two types of low vulnerability propellants are studied which are distinguished by whether the binder is a rubber, such as polyurethane or CTBN, or a plasticizable polymer such as ethyl cellulose or cellulose acetate. The former propellants are made by a partial cure extrusion process while the latter are made by the conventional solvent process. Emphasis is given to a cellulose binder (plasticizer) RDX composition. The type of binder used, the particle size of the RDX and the presence of small quantities of nitrocellulose in the solvent processed compositions have important influences on the mechanical and combustion characteristics of the propellant. The low temperature combustion is of particular concern because of potential breakup of the grains that can lead to instability.

  17. Professional development. Part 4: The hiring process.

    PubMed

    Holman, Tim

    2009-05-01

    By formalizing the hiring process in your EMS system, you help ensure the command staff provides the organization with high-quality employees. It is far better to focus on the quality of the people in your department than the quantity. Many departments have lots of members on their roster, but only a handful who actively contribute.

  18. The Development of Face Processing in Autism

    ERIC Educational Resources Information Center

    Sasson, Noah J.

    2006-01-01

    Both behavioral and neuroimaging evidence indicate that individuals with autism demonstrate marked abnormalities in the processing of faces. These abnormalities are often explained as either the result of an innate impairment to specialized neural systems or as a secondary consequence of reduced levels of social interest. A review of the…

  19. Gully development processes in the Ethiopian Highlands

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Gully erosion is an important soil degradation process in a range of environments, causing considerable soil losses and producing large volumes of sediment. In Ethiopia, gully erosion is a major problem expanding at alarming rate and devastating cultivated and grazing lands. The objective of the stu...

  20. Agile SE Enablers and Quantification Project: Identification, Characterization, and Evaluation Criteria for Systems Engineering Agile Enablers

    DTIC Science & Technology

    2015-01-16

    Development of the evaluation white paper .......................................................................................... 7 3 References...enablers as they are identified. The ultimate result of the process is an evaluation white paper supporting one of three decisions: 1. not likely to...be effective, 2. possibly suitable but more research is needed, or 3. definitely suitable and expedited transition is recommended. This paper

  1. Computational Tools for Accelerating Carbon Capture Process Development

    SciTech Connect

    Miller, David; Sahinidis, N V; Cozad, A; Lee, A; Kim, H; Morinelly, J; Eslick, J; Yuan, Z

    2013-06-04

    This presentation reports development of advanced computational tools to accelerate next generation technology development. These tools are to develop an optimized process using rigorous models. They include: Process Models; Simulation-Based Optimization; Optimized Process; Uncertainty Quantification; Algebraic Surrogate Models; and Superstructure Optimization (Determine Configuration).

  2. USING GREEN CHEMISTRY TO INFLUENCE PROCESS DEVELOPMENT

    EPA Science Inventory

    The twelve principles of green chemistry by Anastas and Warner provide the researcher with a foundation or pathway which allows opportunities to incorporate greenness into an existing reaction or when developing alternative technologies. The twelve additional principles of green ...

  3. Development of the CROW{trademark} process

    SciTech Connect

    Johnson, L.A. Jr.

    1994-05-01

    The Contained Recovery of Oily Waste (CROW{trademark}) technology has been successfully tested in the laboratory and presently is being implemented at field sites contaminated with wood treating wastes and byproducts of town gas production. These field demonstrations will utilize only hot-water displacement without any chemical additives because the use of chemicals to enhance the hot-water flushing process has only been tested on a preliminary basis. Preliminary testing has shown that low concentrations of chemicals could reduce the contaminant content by an additional 10 to 20 wt %. Western Research Institute (WRI) research, plus research at Carnegie Mellon University, on surfactant enhancement of solubility of polynuclear aromatic hydrocarbons in water and water-soil systems indicate the potential of chemical enhancement of the CROW process. Chemicals that have been tested and that were used in these tests are totally biodegradable. The objective of this task was to obtain sufficient baseline data to show the effectiveness and environmentally safe use of chemicals, primarily surfactants, to enhance the CROW process. To meet this objective, 14 one-dimensional displacement tests were conducted. Eleven tests were conducted on a material from a former manufactured gas plant (MGP) site and four tests were conducted with a contaminated soil from a former wood treatment facility. The tests investigated the effect of three chemical concentrations (0, 0.5, and 1.0 vol %) at three temperatures (ambient, the projected optimum temperature, and one 40{degree}F [22{degree}C] below the optimum temperature).

  4. Development of enhanced sulfur rejection processes

    SciTech Connect

    Yoon, R.H.; Luttrell, G.; Adel, G.; Richardson, P.E.

    1993-03-23

    Research at Virginia Tech led to two complementary concepts for improving the removal of inorganic sulfur from much of the Eastern US coals. One controls the surface properties of coal pyrite (FeS[sub 2]) by electrochemical-.potential control, referred to as the Electrochemically Enhanced Sulfur Rejection (EESR) Process: The second controls the flotation of middlings, i.e., particles composed of pyrite with coal inclusions by using polymeric reagents to react with pyrite and convert the middlings to hydrophilic particles, and is termed the Polymer Enhanced Sulfur Rejection (PESR) Process. These new concepts are based on recent research establishing the two main reasons why flotation fails to remove more than about 50% of the pyritic sulfur from coal: superficial oxidization of liberated pyrite to form polysulfide oxidation products so that a part of the liberated pyrite floats with the coal; and hydrophobic coal inclusions in the middlings dominating their flotation so that the middlings also float with the coal. These new pyritic-sulfur rejection processes do not require significant modifications of existing coal preparation facilities, enhancing their adoptability by the coal industry. It is believed that they can be used simultaneously to achieve both free pyrite and locked pyrite rejection.

  5. Ordinary Magic: Resilience Processes in Development.

    ERIC Educational Resources Information Center

    Masten, Ann S.

    2001-01-01

    The study of resilience in child development has overturned many negative assumptions about children growing up in adverse conditions. An examination of findings from variable- and person-focused investigations suggests that resilience is common and usually arises from the normative functions of human adaptational systems, with the greatest…

  6. Interrogating inclusive development in India's transition process.

    PubMed

    Chakrabarti, Anjan; Dhar, Anup

    2012-12-01

    This paper makes two related contributions. First, the dual economic structure underlying development is shown as producing a distinct conception of other comprising of a devalued third world which is foregrounded and world of the third which is excluded. This dyad of inclusion-exclusion of other is produced in relation to the centers of capitalism and modernism. The category of third world helps to displace the language-experience-logic-ethos of the other a la world of the third such that development works over and transforms world of the third, but via the trope of a devalued third world. We then use this framework to explore the relation of global capitalism with world of the third in the Indian context, a relation that is shown to be two fold. There is on one hand an attempt to dismantle world of the third as part of the development trope of overcoming the third world. On the other, through inclusive development, an attempt is made to directly intervene in the economy of world of the third so as to address the problems of income inequality and social exclusion, again under the trope of uplifting the devalued third world.

  7. Robot welding process control development task

    NASA Astrophysics Data System (ADS)

    Romine, Peter L.

    1992-12-01

    The completion of, and improvements made to, the software developed during 1990 for program maintenance on the PC and HEURIKON and transfer to the CYRO, and integration of the Rocketdyne vision software with the CYRO is documented. The new programs were used successfully by NASA, Rocketdyne, and UAH technicians and engineers to create, modify, upload, download, and control CYRO NC programs.

  8. Development of the NEXT Power Processing Unit

    NASA Technical Reports Server (NTRS)

    Phelps, Thomas K.; Wiseman, Steve; Komm, David S.; Bond, Thomas; Pinero, Luis R.

    2005-01-01

    Boeing Electron Dynamic Devices, Inc. (EDD) has designed and fabricated a breadboard version of a 6 kW power processing unit (PPU) for gridded ion thrusters. This breadboard PPU will be integrated with an engineering model 40 cm ion engine designed and tested at NASA Glenn. The results of our tests using resistive loads are reported in this paper. The PPU demonstrated efficiencies to date are higher than 95 percent for the beam supply and higher than 92 percent for the discharge supply at full power. Overall PPU efficiency is greater than 94 percent at full throttle settings.

  9. Gravimelt process development. Quarterly technical progress report

    SciTech Connect

    Not Available

    1983-02-20

    During the current reporting period, the Mod 2, bench-scale Gravimelt reactor was installed, shaken down and operated using a sample of 40% ash run of mine Pittsburgh No. 8 seam coal which had been mine cleaned to a level of 10.3% ash. Operation was successful and an excellent overall mass balance was achieved. Preliminary ash analyses from the test site show the above 97% ash removal calculated from run of mine was obtained as expected from previous laboratory scale tests. Large processed coal samples, prepared during the week of round-the-clock operation, were obtained for the planned washing studies and other protect requirements. 3 tables.

  10. Information Processing Approaches to Cognitive Development

    DTIC Science & Technology

    1988-07-01

    play" or Piagetian questions about when a child makes a transition from pre-symbolic to symbolic functioning. Symbolization in that diffuse sense...approaches to cognitive development. such as Piagetian , Freudean, Gibsonian, see Miller, 1983. 4 Information Prccessing structures. Trius. although Case...motor and verbal protocol analysis and error analysis to explore pre- school children’s problem-solving and planning skills. Children were presented

  11. Materials processing apparatus development for fluoride glass

    NASA Technical Reports Server (NTRS)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  12. In-flight simulation of high agility through active control: Taming complexity by design

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Bradley, Roy

    1993-01-01

    The motivation for research into helicopter agility stems from the realization that marked improvements relative to current operational types are possible, yet there is a dearth of useful criteria for flying qualities at high performance levels. Several research laboratories are currently investing resources in developing second generation airborne rotorcraft simulators. The UK's focus has been the exploitation of agility through active control technology (ACT); this paper reviews the results of studies conducted to date. The conflict between safety and performance in flight research is highlighted and the various forms of safety net to protect against system failures are described. The role of the safety pilot, and the use of actuator and flight envelope limiting are discussed. It is argued that the deep complexity of a research ACT system can only be tamed through a requirement specification assembled using design principles and cast in an operational simulation form. Work along these lines conducted at DRA is described, including the use of the Jackson System Development method and associated Ada simulation.

  13. A pipeline to link meteorological information and TGFs detected by AGILE

    NASA Astrophysics Data System (ADS)

    Ursi, A.; Sanò, P.; Casella, D.; Marisaldi, M.; Dietrich, S.; Tavani, M.

    2017-02-01

    Terrestrial gamma ray flashes (TGFs) are brief (approximately hundreds of microseconds) intense gamma ray emissions coming from Earth's atmosphere (˜15 km above sea level), correlated with thunderstorms and atmospheric electric activity. Since their unexpected discovery in the early 1990s by the Burst And Transient Source Experiment/Compton Gamma Ray Observatory, TGFs have been further investigated by several satellites devoted to high-energy astrophysics. The Astrorivelatore Gamma ad Immagini LEggero (AGILE) mission turned out to be particularly suitable to detect these events, due to a very wide energy range (up to 100 MeV), an optimized triggering system, and a unique low-inclination near-equatorial orbit (2.5°). We describe a detection system, developed for the AGILE satellite, whose aim is to provide real-time meteorological information on each detected TGF. We take advantage of data acquired by geostationary satellites to promptly identify the associated storm and follow its evolution in space and time, in order to study its previous onset and development. Data from Low-Earth Orbit meteorological satellites, such as the Global Precipitation Mission, as well as ground measurements from lightning detection networks, can be integrated in the pipeline. This system allows us a prompt characterization of the ground meteorological conditions at TGF time which will provide instrument-independent trigger validation, fill in a database for subsequent statistical analysis, and eventually, on a longer term perspective, serve as a real-time alert service open to the community.

  14. A multiarchitecture parallel-processing development environment

    NASA Technical Reports Server (NTRS)

    Townsend, Scott; Blech, Richard; Cole, Gary

    1993-01-01

    A description is given of the hardware and software of a multiprocessor test bed - the second generation Hypercluster system. The Hypercluster architecture consists of a standard hypercube distributed-memory topology, with multiprocessor shared-memory nodes. By using standard, off-the-shelf hardware, the system can be upgraded to use rapidly improving computer technology. The Hypercluster's multiarchitecture nature makes it suitable for researching parallel algorithms in computational field simulation applications (e.g., computational fluid dynamics). The dedicated test-bed environment of the Hypercluster and its custom-built software allows experiments with various parallel-processing concepts such as message passing algorithms, debugging tools, and computational 'steering'. Such research would be difficult, if not impossible, to achieve on shared, commercial systems.

  15. Silicon web process development. Annual report

    SciTech Connect

    Duncan, C.S.; Seidensticker, R.G.; McHugh, J.P.; Hill, F.E.; Skutch, M.E.; Driggers, J.M.; Hopkins, R.H.

    1980-06-30

    During this reporting period significant milestones have been met. A new barrier crucible design which consistently maintains melt stability over long periods of time has been successfully tested and used in long growth runs. The pellet feeder for melt replenishment was operated continuously for growth runs of up to 17 hours (a one day growth cycle). The liquid level sensor comprising a laser/sensor system was operated, performed well, and meets the requirements for maintaining liquid level height during growth and melt replenishment. An automated feedback loop connecting the feed mechanism and the liquid level sensing system was designed and constructed and, during the preparation of this report, operated successfully for 3 1/2 hours demonstrating the feasibility of semi-automated dendritic web growth. The web throughput task has resulted in a demonstration of wider good quality web as well as a demonstration of higher throughput rates. The accomplishments during the report period are described in detail. The economic analysis of the dendritic web process was updated. The sensitivity of the cost of sheet to variations in capital equipment cost and recycling dendrites was calculated; and it was shown that these factors have relatively little impact on sheet cost. An important finding was that dendrites from web which had gone all the way through the solar cell fabrication process, when melted and grown into web, produce crystals which show no degradation in cell efficiency. Material quality remains high and cells made from web grown at the start, during, and the end of a run from a replenished melt show comparable efficiencies.

  16. Sprint, agility, strength and endurance capacity in wheelchair basketball players

    PubMed Central

    Granados, C; Otero, M; Badiola, A; Olasagasti, J; Bidaurrazaga-Letona, I; Iturricastillo, A; Gil, SM

    2014-01-01

    The aims of the present study were, firstly, to determine the reliability and reproducibility of an agility T-test and Yo-Yo 10 m recovery test; and secondly, to analyse the physical characteristics measured by sprint, agility, strength and endurance field tests in wheelchair basketball (WB) players. 16 WB players (33.06 ± 7.36 years, 71.89 ± 21.71 kg and sitting body height 86.07 ± 6.82 cm) belonging to the national WB league participated in this study. Wheelchair sprint (5 and 20 m without ball, and 5 and 20 m with ball) agility (T-test and pick-up test) strength (handgrip and maximal pass) and endurance (Yo-Yo 10 m recovery test) were performed. T-test and Yo-Yo 10 m recovery test showed good reproducibility values (intraclass correlation coefficient, ICC = 0.74-0.94). The WB players’ results in 5 and 20 m sprints without a ball were 1.87 ± 0.21 s and 5.70 ± 0.43 s and with a ball 2.10 ± 0.30 s and 6.59 ± 0.61 s, being better than those reported in the literature. Regarding the pick-up test results (16.05 ± 0.52 s) and maximal pass (8.39 ± 1.77 m), players showed worse values than those obtained in elite players. The main contribution of the present study is the characterization of the physical performance profile of WB players using a field test battery. Furthermore, we demonstrated that the agility T-test and the aerobic Yo-Yo 10 m recovery test are reliable; consequently they may be appropriate instruments for measuring physical fitness in WB. PMID:25729153

  17. In Pursuit of Agile Acquisition: Are We There Yet?

    DTIC Science & Technology

    2013-03-01

    bureaucracy in the methodology, and avoid promoting activities that would further expand regulatory guidance and oversight to improve agility. Once an...through an integrated digital system called Blue Force Tracker . Instead of the lack of situational awareness, units now use streaming video to help...to trace forensics collected at other crime scenes or events and trace the data back to specific individuals thus identifying dangerous insurgents

  18. Laser agile illumination for object tracking and classification - Feasibility study

    NASA Technical Reports Server (NTRS)

    Scholl, Marija S.; Vanzyl, Jakob J.; Meinel, Aden B.; Meinel, Marjorie P.; Scholl, James W.

    1988-01-01

    The 'agile illumination' concept for discrimination between ICBM warheads and decoys involves a two-aperture illumination with coherent light, diffraction of light by propagation, and a resulting interference pattern on the object surface. A scanning two-beam interference pattern illuminates one object at a time; depending on the shape, momentum, spinning, and tumbling characteristics of the interrogated object, different temporal signals will be obtained for different classes of objects.

  19. Force Projection, Strategic Agility and the Big Meltdown

    DTIC Science & Technology

    2001-05-18

    UNLIMITED Number of Pages 29 ii Abstract of FORCE PROJECTION, STRATEGIC AGILITY AND THE BIG MELTDOWN Due to global warming , the polar icepack which...INTRODUCTION The polar icecap which covers the Arctic Ocean is melting. It is a well-known, scientific fact. Global warming is the generally...operational factors and functions, as applicable. 3 CHAPTER II BACKGROUND Global Warming and the Arctic During this and the last century, researchers have

  20. Development of a plasma carburizing process

    NASA Astrophysics Data System (ADS)

    Booth, M.; Lees, M. I.; Staines, A. M.

    1982-07-01

    An experimental glow discharge or plasma carburizing apparatus using an anomalous glow discharge created in a methane/hydrogen gas mixture at a pressure in the range 1-25 mbar was developed. Carbon concentration profiles were obtained using the apparatus and compared with similar data for vacuum and with the alternative methods giving a metallurgically superior product and savings in energy and treatment gas. It is indicated that a production glow discharge carburizing system technically feasible and meets criteria such as rapid loading/unloading and the fast heat up required in a commercial system.

  1. Network architecture design of an agile sensing system with sandwich wireless sensor nodes

    NASA Astrophysics Data System (ADS)

    Dorvash, S.; Li, X.; Pakzad, S.; Cheng, L.

    2012-04-01

    Wireless sensor network (WSN) is recently emerged as a powerful tool in the structural health monitoring (SHM). Due to the limitations of wireless channel capacity and the heavy data traffic, the control on the network is usually not real time. On the other hand, many SHM applications require quick response when unexpected events, such as earthquake, happen. Realizing the need to have an agile monitoring system, an approach, called sandwich node, was proposed. Sandwich is a design of complex sensor node where two Imote2 nodes are connected with each other to enhance the capabilities of the sensing units. The extra channel and processing power, added into the nodes, enable agile responses of the sensing network, particularly in interrupting the network and altering the undergoing tasks for burst events. This paper presents the design of a testbed for examination of the performance of wireless sandwich nodes in a network. The designed elements of the network are the software architecture of remote and local nodes, and the triggering strategies for coordinating the sensing units. The performance of the designed network is evaluated through its implementation in a monitoring test in the laboratory. For both original Imote2 and the sandwich node, the response time is estimated. The results show that the sandwich node is an efficient solution to the collision issue in existing interrupt approaches and the latency in dense wireless sensor networks.

  2. Clustering-based urbanisation to improve enterprise information systems agility

    NASA Astrophysics Data System (ADS)

    Imache, Rabah; Izza, Said; Ahmed-Nacer, Mohamed

    2015-11-01

    Enterprises are daily facing pressures to demonstrate their ability to adapt quickly to the unpredictable changes of their dynamic in terms of technology, social, legislative, competitiveness and globalisation. Thus, to ensure its place in this hard context, enterprise must always be agile and must ensure its sustainability by a continuous improvement of its information system (IS). Therefore, the agility of enterprise information systems (EISs) can be considered today as a primary objective of any enterprise. One way of achieving this objective is by the urbanisation of the EIS in the context of continuous improvement to make it a real asset servicing enterprise strategy. This paper investigates the benefits of EISs urbanisation based on clustering techniques as a driver for agility production and/or improvement to help managers and IT management departments to improve continuously the performance of the enterprise and make appropriate decisions in the scope of the enterprise objectives and strategy. This approach is applied to the urbanisation of a tour operator EIS.

  3. Observing peculiar γ-ray pulsars with AGILE

    NASA Astrophysics Data System (ADS)

    Pilia, M.; Pellizzoni, A.

    2011-08-01

    The AGILE γ-ray satellite provides large sky exposure levels (>=109 cm2 s per year on the Galactic Plane) with sensitivity peaking at E ~100 MeV where the bulk of pulsar energy output is typically released. Its ~1 μs absolute time tagging capability makes it perfectly suited for the study of γ-ray pulsars. AGILE collected a large number of γ-ray photons from EGRET pulsars (>=40,000 pulsed counts for Vela) in two years of observations unveiling new interesting features at sub-millisecond level in the pulsars' high-energy light-curves, γ-ray emission from pulsar glitches and Pulsar Wind Nebulae. AGILE detected about 20 nearby and energetic pulsars with good confidence through timing and/or spatial analysis. Among the newcomers we find pulsars with very high rotational energy losses, such as the remarkable PSR B1509-58 with a magnetic field in excess of 1013 Gauss, and PSR J2229+6114 providing a reliable identification for the previously unidentified EGRET source 3EG2227+6122. Moreover, the powerful millisecond pulsar B1821-24, in the globular cluster M28, is detected during a fraction of the observations.

  4. The reliability of a functional agility test for water polo.

    PubMed

    Tucher, Guilherme; de Souza Castro, Flávio Antônio; Garrido, Nuno Domingos; Martins da Silva, António José Rocha

    2014-06-28

    Few functional agility tests for water polo take into consideration its specific characteristics. The preliminary objective of this study was to evaluate the reliability of an agility test for water polo players. Fifteen players (16.3 ± 1.8 years old) with a minimum of two years of competitive experience were evaluated. A Functional Test for Agility Performance (FTAP) was designed to represent the context of this sport. Several trials were performed to familiarize the athlete with the movement. Two experienced coaches measured three repetitions of the FTAP. Descriptive statistics, repeated measures analysis of variance (ANOVA), 95% limit of agreement (LOA), intraclass correlation coefficient (ICC) and standard error of measurements (SEM) were used for data analysis. It was considered that certain criteria of reliability measures were met. There was no significant difference between the repetitions, which may be explained by an effect of the evaluator, the ability of the players or fatigue (p > 0.05). The ICC average from evaluators was high (0.88). The SEM varied between 0.13 s and 0.49 s. The CV average considering each individual was near 6-7%. These values depended on the condition of measurement. As the FTAP contains some characteristics that create a degree of unpredictability, the same athlete may reach different performance results, increasing variability. An adjustment in the sample, familiarization and careful selection of subjects help to improve this situation and enhance the reliability of the indicators.

  5. Agile Science Operations: A New Approach for Primitive Exploration Bodies

    NASA Technical Reports Server (NTRS)

    Chien, Steve A.; Thompson, David R.; Castillo-Rogez, Julie C.; Doyle, Richard; Estlin, Tara; Mclaren, David

    2012-01-01

    Primitive body exploration missions such as potential Comet Surface Sample Return or Trojan Tour and Rendezvous would challenge traditional operations practices. Earth-based observations would provide only basic understanding before arrival and many science goals would be defined during the initial rendezvous. It could be necessary to revise trajectories and observation plans to quickly characterize the target for safe, effective observations. Detection of outgassing activity and monitoring of comet surface activity are even more time constrained, with events occurring faster than round-trip light time. "Agile science operations" address these challenges with contingency plans that recognize the intrinsic uncertainty in the operating environment and science objectives. Planning for multiple alternatives can significantly improve the time required to repair and validate spacecraft command sequences. When appropriate, time-critical decisions can be automated and shifted to the spacecraft for immediate access to instrument data. Mirrored planning systems on both sides of the light-time gap permit transfer of authority back and forth as needed. We survey relevant science objectives, identifying time bottlenecks and the techniques that could be used to speed missions' reaction to new science data. Finally, we discuss the results of a trade study simulating agile observations during flyby and comet rendezvous scenarios. These experiments quantify instrument coverage of key surface features as a function of planning turnaround time. Careful application of agile operations techniques can play a significant role in realizing the Decadal Survey plan for primitive body exploration

  6. A Software Development Simulation Model of a Spiral Process

    NASA Technical Reports Server (NTRS)

    Mizell, Carolyn; Malone, Linda

    2007-01-01

    There is a need for simulation models of software development processes other than the waterfall because processes such as spiral development are becoming more and more popular. The use of a spiral process can make the inherently difficult job of cost and schedule estimation even more challenging due to its evolutionary nature, but this allows for a more flexible process that can better meet customers' needs. This paper will present a discrete event simulation model of spiral development that can be used to analyze cost and schedule effects of using such a process in comparison to a waterfall process.

  7. Developments in bread-making processes.

    PubMed

    Belderok, B

    2000-01-01

    An introduction to the evolutionary history of wheat is followed by a description of the origin and distribution of the modern hexaploid wheat varieties in Europe. Next, the influence of cultural (the way of bread making), social and economic (i.e. the great influence of the United States and Canada) factors on wheat growing in Europe are considered (Section 1). The anatomy and chemical composition of wheat grains and the fundamental differences between hard and soft wheat are described in Section 2. The process of flour making is treated in Section 3. Section 4 contains a study of gluten proteins and wheat starches in relation to the making of bread (Section 5) and of other wheat products (Section 6). Section 7 deals with the genetic bread-wheat properties: grain hardness, milling quality, production of (unwanted) sticky doughs, alpha-amylase levels, and contains an extensive study of genetics and the role of gliadins and glutenins. A concluding section contains the description and evaluation of assay methods to identify the characteristics of bread wheats for the use of millers, arbiters, and especially for growers.

  8. Cascade Processes and Fully Developed Turbulence.

    NASA Astrophysics Data System (ADS)

    Saucier, Antoine

    The energy cascade process in turbulent flows is studied. Kolmogorov inertial range theories are critically reviewed and the multifractal characterization is discussed. Multiplicative cascade models are compared to the energy dissipation field (EDF) measured in the atmosphere. Landau's objection to the 1941 Kolmogorov theory is extended to the predictions of statistical fluid mechanics. The hypothesis Delta v(lambda L) {buildrel {d}over=} lambda^ {1/3} Delta v(L) is rejected with a statistical test. The moments <( logvarepsilon(L))^{p}>, where varepsilon(L) denotes the EDF averaged over a volume of size L, are shown to be gaussian. For the EDF: Convergence tests showed that the exponents tau(q) were not reliable for q < 0; the correlations obey <(mu_{x}(delta)) ^{p}(mu_{x+delta }(delta))^{q}> ~ delta^{gamma(p,q)} but gamma does not always equal the value obtained with a multinomial measure; a privileged scale ration r ~ 1/2 is suggested by the prefactor oscillations of the correlation function. The implications of these results for the modelling of the EDF are discussed.

  9. Acquisition by Processing: A Modular Perspective on Language Development

    ERIC Educational Resources Information Center

    Truscott, John; Smith, Mike Sharwood

    2004-01-01

    The paper offers a model of language development, first and second, within a processing perspective. We first sketch a modular view of language, in which competence is embodied in the processing mechanisms. We then propose a novel approach to language acquisition (Acquisition by Processing Theory, or APT), in which development of the module occurs…

  10. 43 CFR 10005.17 - Plan development process.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of the... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Plan development process. 10005.17 Section... will have 90 days to submit project proposals. The project solicitation process is discussed in...

  11. 43 CFR 10005.17 - Plan development process.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of the... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Plan development process. 10005.17 Section... will have 90 days to submit project proposals. The project solicitation process is discussed in...

  12. Organizational Leadership Process for University Education

    ERIC Educational Resources Information Center

    Llamosa-Villalba, Ricardo; Delgado, Dario J.; Camacho, Heidi P.; Paéz, Ana M.; Valdivieso, Raúl F.

    2014-01-01

    This paper relates the "Agile School", an emerging archetype of the enterprise architecture: "Processes of Organizational Leadership" for leading and managing strategies, tactics and operations of forming in Higher Education Institutions. Agile School is a system for innovation and deep transformation of University Institutions…

  13. Between Oais and Agile a Dynamic Data Management Approach

    NASA Astrophysics Data System (ADS)

    Bennett, V. L.; Conway, E. A.; Waterfall, A. M.; Pepler, S.

    2015-12-01

    In this paper we decribe an approach to the integration of existing archival activities which lies between compliance with the more rigid OAIS/TRAC standards and a more flexible "Agile" approach to the curation and preservation of Earth Observation data. We provide a high level overview of existing practice and discuss how these procedures can be extended and supported through the description of preservation state. The aim of which is to facilitate the dynamic controlled management of scientific data through its lifecycle. While processes are considered they are not statically defined but rather driven by human interactions in the form of risk management/review procedure that produce actionable plans, which are responsive to change. We then proceed by describing the feasibility testing of extended risk management and planning procedures which integrate current practices. This was done through the CEDA Archival Format Audit which inspected British Atmospheric Data Centre and NERC Earth Observation Data Centre Archival holdings. These holdings are extensive, comprising of around 2 Petabytes of data and 137 million individual files, which were analysed and characterised in terms of format, based risk. We are then able to present an overview of the format based risk burden faced by a large scale archive attempting to maintain the usability of heterogeneous environmental data sets We continue by presenting a dynamic data management information model and provide discussion of the following core model entities and their relationships: Aspirational entities, which include Data Entity definitions and their associated Preservation Objectives. Risk entities, which act as drivers for change within the data lifecycle. These include Acquisitional Risks, Technical Risks, Strategic Risks and External Risks Plan entities, which detail the actions to bring about change within an archive. These include Acquisition Plans, Preservation Plans and Monitoring plans which support

  14. Development of Pulsed Processes for the Manufacture of Solar Cells

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The development status of the process based upon ion implantation for the introduction of junctions and back surface fields is described. A process sequence is presented employing ion implantation and pulse processing. Efforts to improve throughout and descrease process element costs for furnace annealing are described. Design studies for a modular 3,000 wafer per hour pulse processor are discussed.

  15. Development and Utility of Automatic Language Processing Technologies. Volume 2

    DTIC Science & Technology

    2014-04-01

    translation (MT), natural language processing ( NLP ), speech synthesis (TTS) and other speech and language processing technologies. 15. SUBJECT TERMS...Automatic speech recognition (ASR), machine translation (MT), natural language processing ( NLP ), and speech synthesis (TTS). 16. SECURITY CLASSIFICATION OF...investigating the development and utility of Automatic Speech Recognition (ASR), Machine Translation (MT), Natural Language Processing ( NLP ), Speech Synthesis

  16. Eutectic Experiment Development for Space Processing

    NASA Technical Reports Server (NTRS)

    Hopkins, R. H.

    1972-01-01

    A ground base test plan and a specimen evaluation scheme have been developed for the aluminum-copper eutectic solidification experiment to be run in the M518 multipurpose electric furnace during the Skylab mission. Besides thermal and solidification studies a detailed description is given of the quantitative metallographic technique which is appropriate for characterizing eutectic structures. This method should prove a key tool for evaluating specimen microstructure which is the most sensitive indicator of changes produced during solidification. It has been recommended that single grain pre-frozen eutectic specimens be used to simplify microstructural evaluation and to eliminate any porosity in the as-cast eutectic specimens. High purity (99.999%) materials from one supplier should be employed for all experiments. Laboratory studies indicate that porosity occurs in the MRC as-cast eutectic ingots but that this porosity can be eliminated by directional freezing. Chemical analysis shows that the MRC ingots are slightly Al rich and contain about .03% impurity. Because of the impurity content the lower cooldown rate (1.2 C/min) should be used for eutectic freezing if MRC material is used in the M518 furnace.

  17. A real time pipeline to link meteorological information and TGFs detected by AGILE

    NASA Astrophysics Data System (ADS)

    Ursi, Alessandro; Tavani, Marco; Dietrich, Stefano; Marisaldi, Martino; Casella, Daniele; Sanò, Paolo; Petracca, Marco; Argan, Andrea

    2015-04-01

    Terrestrial Gamma-ray Flashes (TGFs) are brief (AGILE mission turns out to be particularly suitable to detect TGFs, because of its very wide energy range (up to 100 MeV and beyond), its optimized triggering system and its equatorial orbit. We describe a new alert service that has been developed for the AGILE satellite, whose aim is to provide "real time" meteorological information about the detected TGFs. We take advantage of the Meteosat Second Generation (MSG) satellites data to promptly identify the possible individual thunderstorm or mesoscale convective system associated to the detected TGF event and to follow its evolution in space and time. Data from other meteorological satellites, for example the GPM mission, as well as ground measurements from lightning detection network, can be integrated in the pipeline. This allows us a prompt characterization of the ground meteorological conditions at TGF time which will provide instrument independent trigger validation, fill in a database for subsequent statistical analysis, and eventually, on a longer term perspective, serve as a real time alert system open to the community.

  18. High-Speed Time-Series CCD Photometry with Agile

    NASA Astrophysics Data System (ADS)

    Mukadam, Anjum S.; Owen, R.; Mannery, E.; MacDonald, N.; Williams, B.; Stauffer, F.; Miller, C.

    2011-12-01

    We have assembled a high-speed time-series CCD photometer named Agile for the 3.5 m telescope at Apache Point Observatory, based on the design of a photometer called Argos at McDonald Observatory. Instead of a mechanical shutter, we use the frame-transfer operation of the CCD to end an exposure and initiate the subsequent new exposure. The frame-transfer operation is triggered by the negative edge of a GPS pulse; the instrument timing is controlled directly by hardware, without any software intervention or delays. This is the central pillar in the design of Argos that we have also used in Agile; this feature makes the accuracy of instrument timing better than a millisecond. Agile is based on a Princeton Instruments Acton VersArray camera with a frame-transfer CCD, which has 1K × 1K active pixels, each of size . Using a focal reducer at the Nasmyth focus of the 3.5 m telescope at Apache Point Observatory, we yield a field of view of 2.2 × 2.2 arcmin2 with an unbinned plate scale of 0.13″ pixel-1. The CCD is back-illuminated and thinned for improved blue sensitivity and provides a quantum efficiency ≥80% in the wavelength range of 4500–7500 Å. The unbinned full-frame readout time can be as fast as 1.1 s this is achieved using a low-noise amplifier operating at 1 MHz with an average read noise of the order of rms. At the slow read rate of 100 kHz to be used for exposure times longer than a few seconds, we determine an average read noise of the order of rms. Agile is optimized to observe variability at short timescales from one-third of a second to several hundred seconds. The variable astronomical sources routinely observed with Agile include pulsating white dwarfs, cataclysmic variables, flare stars, planetary transits, and planetary satellite occultations.

  19. Waste immobilization process development at the Savannah River Plant

    SciTech Connect

    Charlesworth, D L

    1986-01-01

    Processes to immobilize various wasteforms, including waste salt solution, transuranic waste, and low-level incinerator ash, are being developed. Wasteform characteristics, process and equipment details, and results from field/pilot tests and mathematical modeling studies are discussed.

  20. The X-31 aircraft: Advances in aircraft agility and performance

    NASA Astrophysics Data System (ADS)

    Alcorn, C. W.; Croom, M. A.; Francis, M. S.; Ross, H.

    1996-08-01

    The X-31 enhanced fighter maneuverability (EFM) demonstrator has pioneered agile flight in the post-stall flight regime and explored integrated multi-axis thrust vectoring across a broad flight envelope. Its maneuvering achievements include sustained flight up to 70 degrees angle of attack, velocity vector rolls in deep post-stall conditions, and post-stall turns from high entry to exit speeds with ultra low turning/transitional conditions. The concept of post-stall maneuverability was extensively studied in simulations preceding initiation of the X-31 program. These simulations provided a baseline for tactical utility demonstrations and vehicle design requirements. Post-stall maneuverability was not achieved without encountering and mitigating the effects of highly unsteady, asymmetric, vortex-dominated flow-fields associated with post-stall flight. Anomalies in vehicle response to control inputs were observed at high angles of attack, as were differences between simulator and actual flight parameters due to a misrepresentation of the effects of these complex flowfields. Some preliminary force and moment data for the X-31 configuration during dynamic maneuvers are provided to highlight the complex nature of the flowfield. The X-31 aircraft's enabling capabilities, including multi-axis thrust vectoring and integrated flight/propulsion control also provided performance enhancements across the entire flight envelope. In what were known as ‘quasi-tailless’ experiments, conventional aerodynamic control surfaces were used to reduce or eliminate the stabilizing influence of the vertical stabilizer, while the vehicle's multi-axis thrust vectoring capability was used for restabilization. Properly exploited, these technologies can lead to the reduction or elimination of traditional aerodynamic control surfaces, which provides profound improvements in vehicle range, weight, payload, and low observability. This review focuses on some of the principal aerodynamic issues

  1. Virtual Collaborative Simulation Environment for Integrated Product and Process Development

    NASA Technical Reports Server (NTRS)

    Gulli, Michael A.

    1997-01-01

    Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

  2. Dimpled ball grid array process development for space flight applications

    NASA Technical Reports Server (NTRS)

    Barr, S. L.; Mehta, A.

    2000-01-01

    A 472 dimpled ball grid array (D-BGA) package has not been used in past space flight environments, therefore it was necessary to develop a process that would yield robust and reliable solder joints. The process developing assembly, inspection and rework techniques, were verified by conducting environmental tests. Since the 472 D-BGA packages passed the above environmental tests within the specifications, the process was successfully developed for space flight electronics.

  3. Effects of an over-the-counter vented mouthguard on cardiorespiratory responses to exercise and physical agility.

    PubMed

    Bailey, Stephen P; Willauer, Thomas J; Balilionis, Gytis; Wilson, Laura E; Salley, John T; Bailey, Elizabeth K; Strickland, Tony L

    2015-03-01

    Many athletes avoid using mouthguards because they believe that they impair their ability to breath and negatively affect performance. Recently, some manufacturers have developed "vented" mouthguards (VentMGs) to address this concern. The purposes of this investigation were to describe the impact of a commercially available "vented" boil-and-bite mouthguard on the physiological responses to graded exercise and to determine whether the use of the same mouthguard influences performance during traditional physical agility tests. Recreationally trained males (n = 15) (age = 24 ± 1 year; (Equation is included in full-text article.)= 43.5 ± 1.9 ml·kg·min; body mass index = 25.2 ± 0.9) completed 3 randomly assigned trials where they wore no mouthguard (control), a traditional mouthguard (TradMG), or a VentMG. During each trial, subjects completed a modified maximal exercise test on a cycle ergometer and a series of physical agility tests (40-m dash, vertical leap, broad jump, 3-cone drill, and shuttle run). No differences were seen between control and the TradMG in any cardiorespiratory measures at any time during the maximal exercise test. Ventilation and blood lactate were lower (p ≤ 0.05) during VentMG at 200 W and at MAX; however, no differences in (Equation is included in full-text article.)were observed. Although TradMG had no impact on physical agility, VentMG produced a higher (1.9 cm; p = 0.03) vertical leap than control. Both mouthguard conditions negatively affected perceptions of breathability, comfort, and ability to communicate, but no differences existed between the 2 conditions. These findings confirm that TradMG has no negative impact on physiological function during exercise and physical agility; however, VentMG may have a positive impact at higher workload and on vertical leap.

  4. Team-based work and work system balance in the context of agile manufacturing.

    PubMed

    Yauch, Charlene A

    2007-01-01

    Manufacturing agility is the ability to prosper in an environment characterized by constant and unpredictable change. The purpose of this paper is to analyze team attributes necessary to facilitate agile manufacturing, and using Balance Theory as a framework, it evaluates the potential positive and negative impacts related to these team attributes that could alter the balance of work system elements and resulting "stress load" experienced by persons working on agile teams. Teams operating within the context of agile manufacturing are characterized as multifunctional, dynamic, cooperative, and virtual. A review of the literature relevant to each of these attributes is provided, as well as suggestions for future research.

  5. The influence of physical and cognitive factors on reactive agility performance in men basketball players.

    PubMed

    Scanlan, Aaron; Humphries, Brendan; Tucker, Patrick S; Dalbo, Vincent

    2014-01-01

    This study explored the influence of physical and cognitive measures on reactive agility performance in basketball players. Twelve men basketball players performed multiple sprint, Change of Direction Speed Test, and Reactive Agility Test trials. Pearson's correlation analyses were used to determine relationships between the predictor variables (stature, mass, body composition, 5-m, 10-m and 20-m sprint times, peak speed, closed-skill agility time, response time and decision-making time) and reactive agility time (response variable). Simple and stepwise regression analyses determined the individual influence of each predictor variable and the best predictor model for reactive agility time. Morphological (r = -0.45 to 0.19), sprint (r = -0.40 to 0.41) and change-of-direction speed measures (r = 0.43) had small to moderate correlations with reactive agility time. Response time (r = 0.76, P = 0.004) and decision-making time (r = 0.58, P = 0.049) had large to very large relationships with reactive agility time. Response time was identified as the sole predictor variable for reactive agility time in the stepwise model (R(2) = 0.58, P = 0.004). In conclusion, cognitive measures had the greatest influence on reactive agility performance in men basketball players. These findings suggest reaction and decision-making drills should be incorporated in basketball training programmes.

  6. Analysis of global Terrestrial Gamma Ray Flashes distribution and special focus on AGILE detections over South America

    NASA Astrophysics Data System (ADS)

    Fabró, Ferran; Montanyà, Joan; Marisaldi, Martino; van der Velde, Oscar A.; Fuschino, Fabio

    2015-03-01

    Global distribution of the Terrestrial Gamma-ray Flashes (TGFs) detected by AGILE and RHESSI for the period from March 2009 to July 2012 has been analysed. A fourth TGF production region has been distinguished over the Pacific. It is confirmed that TGF occurrence follows the Intertropical Convergence Zone (ITCZ) seasonal migration and prefers afternoons. TGF/lightning ratio appears to be lower over America than other regions suggesting that meteorological regional differences are important for the TGF production. Diurnal cycle of TGFs peaks in the afternoon suggesting that Convective Available Potential Energy (CAPE) and convection are important for TGF production. Moreover all AGILE passages over South America in the same period have been analysed to find meteorological preferences for TGF occurrence. In each passage the analysis of Cloud Top Altitude (CTA), CAPE, number of strokes, number of storms and coverage area of clouds with temperatures below -70 °C (Cloud Top Coverage area, CTC) are computed. On average, AGILE has been exposed to 19,100 strokes between each TGF representing ∼68 h of exposure over active storms. High CAPE values, high cloud tops and high stroke occurrence suggest that meteorological conditions conducive to vigorous and electrically active storms are important for TGF production. It is shown that a high number of thunderstorms is preferable for TGF production which may be explained by a greater chance of the presence of a thunderstorm in the best development stage for TGF production. High tropopause altitude seems to be important but not primordial for TGF production.

  7. The Agile Approach with Doctoral Dissertation Supervision

    ERIC Educational Resources Information Center

    Tengberg, Lars Göran Wallgren

    2015-01-01

    Several research findings conclude that many doctoral students fail to complete their studies within the allowable time frame, in part because of problems related to the research and supervision process. Surveys show that most doctoral students are generally satisfied with their dissertation supervision. However, these surveys also reveal some…

  8. Linking data repositories - an illustration of agile data curation principles through robust documentation and multiple application programming interfaces

    NASA Astrophysics Data System (ADS)

    Benedict, K. K.; Servilla, M. S.; Vanderbilt, K.; Wheeler, J.

    2015-12-01

    The growing volume, variety and velocity of production of Earth science data magnifies the impact of inefficiencies in data acquisition, processing, analysis, and sharing workflows, potentially to the point of impairing the ability of researchers to accomplish their desired scientific objectives. The adaptation of agile software development principles (http://agilemanifesto.org/principles.html) to data curation processes has significant potential to lower barriers to effective scientific data discovery and reuse - barriers that otherwise may force the development of new data to replace existing but unusable data, or require substantial effort to make data usable in new research contexts. This paper outlines a data curation process that was developed at the University of New Mexico that provides a cross-walk of data and associated documentation between the data archive developed by the Long Term Ecological Research (LTER) Network Office (PASTA - http://lno.lternet.edu/content/network-information-system) and UNM's institutional repository (LoboVault - http://repository.unm.edu). The developed automated workflow enables the replication of versioned data objects and their associated standards-based metadata between the LTER system and LoboVault - providing long-term preservation for those data/metadata packages within LoboVault while maintaining the value-added services that the PASTA platform provides. The relative ease with which this workflow was developed is a product of the capabilities independently developed on both platforms - including the simplicity of providing a well-documented application programming interface (API) for each platform enabling scripted interaction and the use of well-established documentation standards (EML in the case of PASTA, Dublin Core in the case of LoboVault) by both systems. These system characteristics, when combined with an iterative process of interaction between the Data Curation Librarian (on the LoboVault side of the process

  9. Agility - The Danish Way (Briefing Charts)

    DTIC Science & Technology

    2014-06-01

    Op OPLAN Approval Strategic OPLAN Draft Op OPLAN SORs ROE REQ Phase 5 Execution Military Response Options ( MRO ) Tasker for MRO SACEUR’s...Strategic Assessment (SSA) Draft MROs Strategic OPLAN, SORs ROEREQ Phase 4a Strategic CONOPS Development Phase 4b Strategic OPLAN Development (Force...Strategic OPLAN, ROEREQ, TCSOR Endorsed Transition OPLAN Aproved Transition OPLAN NAC Execution Directive SPMP SMA and MROs Endorsed Strategic OPLAN

  10. The technology base for agile manufacturing

    NASA Technical Reports Server (NTRS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-01-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  11. Global Software Development Patterns for Project Management

    NASA Astrophysics Data System (ADS)

    Välimäki, Antti; Kääriäinen, Jukka; Koskimies, Kai

    Global software development with the agile or waterfall development process has been taken into use in many companies. GSD offers benefits but also new challenges without known, documented solutions. The goal of this research is to present current best practices for GSD in the form of process patterns for project management, evaluated by using a scenario-based assessment method. The best practices have been collected from a large company operating in process automation. It is expected that the resulting pattern language helps other companies to improve their GSD processes by incorporating the patterns in the processes.

  12. Development of Efficiency in Visual Functioning: An Evaluation Process.

    ERIC Educational Resources Information Center

    Collins, Marcia E.; Barraga, Natalie C.

    1980-01-01

    The article reviews the Diagnostic Assessment Procedure and related facets of the evaluation process within the Program to Develop Efficiency in Visual Functioning. Basic assumptions, rationale for development, administration, interpretation, and use of the program are considered. (Author/PHR)

  13. How rolling forecasting facilitates dynamic, agile planning.

    PubMed

    Miller, Debra; Allen, Michael; Schnittger, Stephanie; Hackman, Theresa

    2013-11-01

    Rolling forecasting may be used to replace or supplement the annual budget process. The rolling forecast typically builds on the organization's strategic financial plan, focusing on the first three years of plan projections and comparing the strategic financial plan assumptions with the organization's expected trajectory. Leaders can then identify and respond to gaps between the rolling forecast and the strategic financial plan on an ongoing basis.

  14. Agile Electromagnetics Exploiting High Speed Logic (AEEHSL).

    DTIC Science & Technology

    2014-09-26

    examination and alteration of codes and filter weights 3. READ Mode - This mode enables the reading or replaying of the data from the digital tape recorder...available in this subsystems are used to initialize the * radar, clock the code from the high-speed code storage memory to drive the code modulator, delay...correlation process. There is storage space within the high speed memory for 32 codes of length 64 bits or less. The radiated code can be changed by a

  15. Unsteady aerodynamic models for agile flight at low Reynolds numbers

    NASA Astrophysics Data System (ADS)

    Brunton, Steven L.

    This work develops low-order models for the unsteady aerodynamic forces on a wing in response to agile maneuvers at low Reynolds number. Model performance is assessed on the basis of accuracy across a range of parameters and frequencies as well as of computational efficiency and compatibility with existing control techniques and flight dynamic models. The result is a flexible modeling procedure that yields accurate, low-dimensional, state-space models. The modeling procedures are developed and tested on direct numerical simulations of a two-dimensional flat plate airfoil in motion at low Reynolds number, Re=100, and in a wind tunnel experiment at the Illinois Institute of Technology involving a NACA 0006 airfoil pitching and plunging at Reynolds number Re=65,000. In both instances, low-order models are obtained that accurately capture the unsteady aerodynamic forces at all frequencies. These cases demonstrate the utility of the modeling procedure developed in this thesis for obtaining accurate models for different geometries and Reynolds numbers. Linear reduced-order models are constructed from either the indicial response (step response) or realistic input/output maneuvers using a flexible modeling procedure. The method is based on identifying stability derivatives and modeling the remaining dynamics with the eigensystem realization algorithm. A hierarchy of models is developed, based on linearizing the flow at various operating conditions. These models are shown to be accurate and efficient for plunging, pitching about various points, and combined pitch and plunge maneuvers, at various angle of attack and Reynolds number. Models are compared against the classical unsteady aerodynamic models of Wagner and Theodorsen over a large range of Strouhal number and reduced frequency for a baseline comparison. Additionally, state-space representations are developed for Wagner's and Theodorsen's models, making them compatible with modern control-system analysis. A number of

  16. MEMS product engineering using fabrication process development tools

    NASA Astrophysics Data System (ADS)

    Hahn, K.; Schmidt, T.; Ortloff, D.; Popp, J.; Wagener, A.; Brück, R.

    2008-12-01

    The development of MEMS devices differs substantially from product engineering methods used in more traditional industries. The approach is characterized by a close customer involvement and product specific fabrication processes. A large number interdependencies between device design on the one hand and manufacturing process development on the other hand make product engineering in the MEMS area a rather tedious and complicated task. In this paper we discuss a comprehensive customer-oriented MEMS product engineering methodology. Both MEMS design and fabrication process development are analyzed with regard to procedures and interfaces used in order to develop an appropriate CAD support either in terms of existing tools or by specifying individual tools to be implemented. The manufacturing process development is part of this holistic approach and is supported by a CAD environment for the management and the design of thin-film MEMS fabrication processes. This environment has been developed by the authors and became recently commercially available.

  17. Agile Objects: Component-Based Inherent Survivability

    DTIC Science & Technology

    2003-12-01

    We design, implement, and develop a component middleware system which enables online application reconfiguration to enhance application...Objects project has accomplished a basic proof of concept of the key project ideas showing working systems that embody location independence and online ...migration, open real-time structures and pre-allocation of resources to enable rapid migration, online interface mutation for elusive interfaces, and

  18. Agile Development & Software Architecture - Crossing the Great Divide

    DTIC Science & Technology

    2016-06-07

    context. Previously, Nanette worked at Pitney Bowes Inc., most recently as Director of Architecture and Quality Management , where she was responsible...scenario-based approach to specify quality attributes. 3 TWITTER Hashtag #seiwebinar Crossing the Great Divide Brown , 4/22/2010 © 2010 Carnegie...University What is Architecture? Structure A Thematic Analysis System Qualities Decisions / Governance Multi-Dimensional SEI IEEE TOGAF Rozanski & Woods 12

  19. Leader Development, Learning Agility, and the Army Profession

    DTIC Science & Technology

    2012-05-01

    decisions and include all enemy, friendly, and neutral systems as well as the physical environment, governance, local resources, culture, and technology...outposts and must be nested with the brigade commander’s intent (2 command levels up). Clearly, the brigade commander cannot be physically present...situations, (2) operating with and within joint, interagency and multinational organizations, (3) rapid responsiveness and (4) the mental and physical

  20. Agile Port System Transition Support Transition Plan Development

    DTIC Science & Technology

    2013-07-29

    the  form  of documented science and technology and combatant commander  needs (expressed in terms of technology gaps and seams) for those selected...CRADA),  Joint Capability Technology Demonstrations (JCTD), as traditional paths for transition, as well as other  forms  for rapid transition, such as...TIP) 3.1.1 Description TIP is a prototype web portal in the  form  of a virtual private network (VPN) hosted by a third  party logistics services

  1. Sustaining Innovation: Developing an Instructional Technology Assessment Process

    ERIC Educational Resources Information Center

    Carmo, Monica Cristina

    2013-01-01

    This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

  2. A Strategic Science and Technology Planning and Development Process Model

    DTIC Science & Technology

    2005-02-01

    developed process model to the research and technology initiatives of the U.S. Army Tank-Automotive Research, Development and Engineering Center...action teams were formed (under change management sponsorship of a champion) to formulate and implement an improved process model considered essential

  3. Development of Nano Processing Technology for Shape Memory Alloy Fibers

    DTIC Science & Technology

    2011-01-30

    Final Report AOARD-09-4037 (FA2386-09-1-4037) Title: Development of nano processing technology for shape memory alloy fibers PI: Hiroyuki...4. TITLE AND SUBTITLE Development of nano processing technology for shape memory alloy fibers 5a. CONTRACT NUMBER FA23860914037 5b. GRANT NUMBER

  4. On the Heterogeneity of Psychological Processes in Syntactic Development.

    ERIC Educational Resources Information Center

    Hass, Wilbur A.

    Children's language acquisition is viewed by developmental psycholinguists as a process of change in the organization of language processing operations. Normal children seem to acquire their native language by this process, rather than by eliminating specific mistakes. Preschool language develops in stages, and knowledge of where syntactic change…

  5. Developing Friction Stir Welding Process Model for ICME Application

    NASA Astrophysics Data System (ADS)

    Yang, Yu-Ping

    2015-01-01

    A framework for developing a product involving manufacturing processes was developed with integrated computational materials engineering approach. The key component in the framework is a process modeling tool which includes a thermal model, a microstructure model, a thermo-mechanical, and a property model. Using friction stir welding (FSW) process as an example, development of the process modeling tool was introduced in detail. The thermal model and the microstructure model of FSW of steels were validated with the experiment data. The model can predict reasonable temperature and hardness distributions as observed in the experiment. The model was applied to predict residual stress and joint strength of a pipe girth weld.

  6. A Sense of Locality and Tactical Agility,

    DTIC Science & Technology

    1986-12-13

    it takes for his forces to move across the terrain In his area. He must know the rates of movement for foot soldiers, for wheeled vehicles, for...than one occasion. The successful leader made a fetish of properly conducting personal reconnaissances, to the extent of more than once moving into...exercise. To help develop his sense of locality the commander should practice actual unit movements. He should walk with his foot soldiers and ride in

  7. Process Development and Integration Lab (PDIL) + Measurements and Characterization (Presentation)

    SciTech Connect

    Nelson, B.

    2008-04-01

    The Process Development and Integration Lab (PDIL) Vision is to integrate deposition, characterization, and processing by being flexible and robust; having a standardized transfer interface; and controlled sample ambient between tools. The benefits are: (1) answers to previously inaccessible research questions; (2) control and characterization of critical surfaces (interfaces) and how their impact on subsequent layers; (3) assess process-related source chemistry, surface chemistry and kinetics, and bulk reconstruction; (4) grow layers and alter interfaces using controlled processes and transfer ambients (without exposure to air); (5) develop new techniques, methodologies, device structures, materials, and tools (growth, processing, and analytical); and (6) improved collaborations with university and industry researchers.

  8. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Basile, Lisa R.; Kelly, Angelita C.

    1987-01-01

    The Spacelab Data Processing Facility (SLDPF) is an integral part of the Space Shuttle data network for missions that involve attached scientific payloads. Expert system prototypes were developed to aid in the performance of the quality assurance function of the Spacelab and/or Attached Shuttle Payloads processed telemetry data. The Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS), two expert systems, were developed to determine their feasibility and potential in the quality assurance of processed telemetry data. The capabilities and performance of these systems are discussed.

  9. Waveform-Agile Tracking In Heavy Sea Clutter

    DTIC Science & Technology

    2007-01-01

    Waveform-Agile Tracking In Heavy Sea Clutter Sandeep P. Sira , Antonia Papandreou-Suppappola, Darryl Morrell†, and Douglas Cochran SenSIP Center...to a non-adaptive system. The paper is organized as follows. In Section II, we describe the models for the target dynamics, clutter, and observations ...dependence on zs[n]. C. Observations Model At the end of Sub-dwell 2 of the kth dwell, the measurement provided to the tracker is Yk = [yTn̂0−nv

  10. Flat-plate solar array project. Volume 5: Process development

    NASA Technical Reports Server (NTRS)

    Gallagher, B.; Alexander, P.; Burger, D.

    1986-01-01

    The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

  11. Metal containing material processing on coater/developer system

    NASA Astrophysics Data System (ADS)

    Kawakami, Shinichiro; Mizunoura, Hiroshi; Matsunaga, Koichi; Hontake, Koichi; Nakamura, Hiroshi; Shimura, Satoru; Enomoto, Masashi

    2016-03-01

    Challenges of processing metal containing materials need to be addressed in order apply this technology to Behavior of metal containing materials on coater/developer processing including coating process, developer process and tool metal contamination is studied using CLEAN TRACKTM LITHIUS ProTM Z (Tokyo Electron Limited). Through this work, coating uniformity and coating film defectivity were studied. Metal containing material performance was comparable to conventional materials. Especially, new dispense system (NDS) demonstrated up to 80% reduction in coating defect for metal containing materials. As for processed wafer metal contamination, coated wafer metal contamination achieved less than 1.0E10 atoms/cm2 with 3 materials. After develop metal contamination also achieved less than 1.0E10 atoms/cm2 with 2 materials. Furthermore, through the metal defect study, metal residues and metal contamination were reduced by developer rinse optimization.

  12. Relationship Between Reactive Agility and Change of Direction Speed in Amateur Soccer Players.

    PubMed

    Matlák, János; Tihanyi, József; Rácz, Levente

    2016-06-01

    The aim of the study was to assess the relationship between reactive agility and change of direction speed (CODS) among amateur soccer players using running tests with four directional changes. Sixteen amateur soccer players (24.1 ± 3.3 years; 72.4 ± 7.3 kg; 178.7 ± 6 cm) completed CODS and reactive agility tests with four changes of direction using the SpeedCourt™ system (Globalspeed GmbH, Hemsbach, Germany). Countermovement jump (CMJ) height and maximal foot tapping count (completed in 3 seconds) were also measured with the same device. In the reactive agility test, participants had to react to a series of light stimuli projected onto a screen. Total time was shorter in the CODS test than in the reactive agility test (p < 0.001). Nonsignificant correlations were found among variables measured in the CODS, reactive agility, and CMJ tests. Low common variance (r = 0.03-0.18) was found between CODS and reactive agility test variables. The results of this study underscore the importance of cognitive factors in reactive agility performance and suggest that specific methods may be required for training and testing reactive agility and CODS.

  13. The Preparation of Cognitively Agile Principals for Turnaround Schools: A Leadership Preparation Programme Study

    ERIC Educational Resources Information Center

    Reyes-Guerra, Daniel; Pisapia, John; Mick, Annie

    2016-01-01

    The purpose of this study was to examine the ability of two educational leadership university programmes to improve the cognitive agility of their graduates. The research looked to discover whether the aspiring principals exited the programmes with an increased ability to employ cognitive agility--the ability to use the multiple thinking skills of…

  14. Impact of Business Intelligence and IT Infrastructure Flexibility on Competitive Advantage: An Organizational Agility Perspective

    ERIC Educational Resources Information Center

    Chen, Xiaofeng

    2012-01-01

    There is growing use of business intelligence (BI) for better management decisions in industry. However, empirical studies on BI are still scarce in academic research. This research investigates BI from an organizational agility perspective. Organizational agility is the ability to sense and respond to market opportunities and threats with speed,…

  15. 76 FR 59456 - ASGI Agility Income Fund, et al.; Notice of Application

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-26

    ... sales loads (``CDSCs''). Applicants: ASGI Agility Income Fund (``Agility Fund''), ASGI Aurora Opportunities Fund, LLC (``Aurora Fund''), and ASGI Corbin Multi- Strategy Fund, LLC (``Corbin Fund'') (each a... Aurora Fund and the Corbin Fund are each organized as a Delaware limited liability company. The...

  16. Statistical analysis with dilatation for development process of human fetuses.

    PubMed

    Naito, Kanta; Notsu, Akifumi; Udagawa, Jun; Otani, Hiroki

    2017-02-01

    This paper is concerned with the development process of human fetuses. Though the development process of human fetuses still includes many unknown issues, it is known that a certain harmonious relationship between the organs can be observed. This knowledge is based on our intuition, but we have no theory which clarifies these harmonized developments. The paper aims to give a mathematical understanding of the notion of harmonized development through the use of dilatation, which is a measure of the departure from conformal mapping. The asymptotics for dilatation have been developed using certain efficient models of quasiconformal mapping. The proposed method of dilatation is effectively applied to the human fetus data.

  17. Agile delivery of protein therapeutics to CNS.

    PubMed

    Yi, Xiang; Manickam, Devika S; Brynskikh, Anna; Kabanov, Alexander V

    2014-09-28

    A variety of therapeutic proteins have shown potential to treat central nervous system (CNS) disorders. Challenge to deliver these protein molecules to the brain is well known. Proteins administered through parenteral routes are often excluded from the brain because of their poor bioavailability and the existence of the blood-brain barrier (BBB). Barriers also exist to proteins administered through non-parenteral routes that bypass the BBB. Several strategies have shown promise in delivering proteins to the brain. This review, first, describes the physiology and pathology of the BBB that underscore the rationale and needs of each strategy to be applied. Second, major classes of protein therapeutics along with some key factors that affect their delivery outcomes are presented. Third, different routes of protein administration (parenteral, central intracerebroventricular and intraparenchymal, intranasal and intrathecal) are discussed along with key barriers to CNS delivery associated with each route. Finally, current delivery strategies involving chemical modification of proteins and use of particle-based carriers are overviewed using examples from literature and our own work. Whereas most of these studies are in the early stage, some provide proof of mechanism of increased protein delivery to the brain in relevant models of CNS diseases, while in few cases proof of concept had been attained in clinical studies. This review will be useful to broad audience of students, academicians and industry professionals who consider critical issues of protein delivery to the brain and aim developing and studying effective brain delivery systems for protein therapeutics.

  18. Lean and Agile Precision Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Slocum, Alexander H.

    2002-01-01

    A quasi-kinematic coupling (QKC) is an alignment interface that can be used to make low-cost assemblies with sub-micron precision and/or sealing contact. Unlike kinematic couplings that rely on point contacts formed by mating balls in v-grooves, quasi-kinematic couplings are based on arc contacts formed by mating three balls with three axisymmetric grooves. Though a quasi-kinematic coupling is technically not an exact constraint coupling, proper design of the contacts can produce a weakly over constrained coupling that emulates an exact constraint coupling. This paper covers the practical design of quasi-kinematic couplings and derives the theory that predicts quasi-kinematic coupling stiffness. A metric of over constraint is presented and used to develop recommended practices for minimizing the over constraint in quasi-kinematic couplings. Experimental results are provided to show that quasi-kinematic couplings can provide repeatability (1/4 micron) that is comparable to exact constraint couplings.

  19. Agile Delivery of Protein Therapeutics to CNS

    PubMed Central

    Yi, Xiang; Manickam, Devika S.; Brynskikh, Anna; Kabanov, Alexander V.

    2014-01-01

    A variety of therapeutic proteins have shown potential to treat central nervous system (CNS) disorders. Challenge to deliver these protein molecules to the brain is well known. Proteins administered through parenteral routes are often excluded from the brain because of their poor bioavailability and the existence of the blood-brain barrier (BBB). Barriers also exist to proteins administered through non-parenteral routes that bypass the BBB. Several strategies have shown promise in delivering proteins to the brain. This review, first, describes the physiology and pathology of the BBB that underscore the rationale and needs of each strategy to be applied. Second, major classes of protein therapeutics along with some key factors that affect their delivery outcomes are presented. Third, different routes of protein administration (parenteral, central intracerebroventricular and intraparenchymal, intranasal and intrathecal) are discussed along with key barriers to CNS delivery associated with each route. Finally, current delivery strategies involving chemical modification of proteins and use of particle-based carriers are overviewed using examples from literature and our own work. Whereas most of these studies are in the early stage, some provide proof of mechanism of increased protein delivery to the brain in relevant models of CNS diseases, while in few cases proof of concept had been attained in clinical studies. This review will be useful to broad audience of students, academicians and industry professionals who consider critical issues of protein delivery to the brain and aim developing and studying effective brain delivery systems for protein therapeutics. PMID:24956489

  20. Enabler for the agile virtual enterprise

    NASA Astrophysics Data System (ADS)

    Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

    2001-10-01

    In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

  1. Team Software Development for Aerothermodynamic and Aerodynamic Analysis and Design

    NASA Technical Reports Server (NTRS)

    Alexandrov, N.; Atkins, H. L.; Bibb, K. L.; Biedron, R. T.; Carpenter, M. H.; Gnoffo, P. A.; Hammond, D. P.; Jones, W. T.; Kleb, W. L.; Lee-Rausch, E. M.

    2003-01-01

    A collaborative approach to software development is described. The approach employs the agile development techniques: project retrospectives, Scrum status meetings, and elements of Extreme Programming to efficiently develop a cohesive and extensible software suite. The software product under development is a fluid dynamics simulator for performing aerodynamic and aerothermodynamic analysis and design. The functionality of the software product is achieved both through the merging, with substantial rewrite, of separate legacy codes and the authorship of new routines. Examples of rapid implementation of new functionality demonstrate the benefits obtained with this agile software development process. The appendix contains a discussion of coding issues encountered while porting legacy Fortran 77 code to Fortran 95, software design principles, and a Fortran 95 coding standard.

  2. High-power ultrasonic processing: Recent developments and prospective advances

    NASA Astrophysics Data System (ADS)

    Gallego-Juarez, Juan A.

    2010-01-01

    Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at industrial level. However, during the last ten years the interest in ultrasonic processing has revived particularly in industrial sectors where the ultrasonic technology may represent a clean and efficient tool to improve classical existing processes or an innovation alternative for the development of new processes. Such seems to be the case of relevant sectors such as food industry, environment, pharmaceuticals and chemicals manufacture, machinery, mining, etc where power ultrasound is becoming an emerging technology for process development. The possible major problem in the application of high-intensity ultrasound on industrial processing is the design and development of efficient power ultrasonic systems (generators and reactors) capable of large scale successful operation specifically adapted to each individual process. In the area of ultrasonic processing in fluid media and more specifically in gases, the development of the steppedplate transducers and other power ge with extensive radiating surface has strongly contributed to the implementation at semi-industrial and industrial stage of several commercial applications, in sectors such as food and beverage industry (defoaming, drying, extraction, etc), environment (air cleaning, sludge filtration, etc...), machinery and process for manufacturing (textile washing, paint manufacture, etc). The development of different cavitational reactors for liquid treatment in continuous flow is helping to introduce into industry the wide potential of the area of sonochemistry. Processes such as water and effluent treatment, crystallization, soil remediation, etc have been already implemented at semi-industrial and/or industrial stage. Other single advances in sectors like mining or energy have

  3. A Neuroconstructivist Model of Past Tense Development and Processing

    ERIC Educational Resources Information Center

    Westermann, Gert; Ruh, Nicolas

    2012-01-01

    We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated…

  4. Vulnerable periods and processes during central nervous system development.

    PubMed Central

    Rodier, P M

    1994-01-01

    The developing central nervous system (CNS) is the organ system most frequently observed to exhibit congenital abnormalities. While the developing CNS lacks a blood brain barrier, the characteristics of known teratogens indicate that differential doses to the developing vs mature brain are not the major factor in differential sensitivity. Instead, most agents seem to act on processes that occur only during development. Thus, it appears that the susceptibility of the developing brain compared to the mature one depends to a great extent on the presence of processes sensitive to disruption. Yet cell proliferation, migration, and differentiation characterize many other developing organs, so the difference between CNS and other organs must depend on other properties of the developing CNS. The most important of these is probably the fact that nervous system development takes much longer than development of other organs, making it subject to injury over a longer period. PMID:7925182

  5. Model for Simulating a Spiral Software-Development Process

    NASA Technical Reports Server (NTRS)

    Mizell, Carolyn; Curley, Charles; Nayak, Umanath

    2010-01-01

    A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code

  6. Gender-specific influences of balance, speed, and power on agility performance.

    PubMed

    Sekulic, Damir; Spasic, Miodrag; Mirkov, Dragan; Cavar, Mile; Sattler, Tine

    2013-03-01

    The quick change of direction (i.e., agility) is an important athletic ability in numerous sports. Because of the diverse and therefore hardly predictable manifestations of agility in sports, studies noted that the improvement in speed, power, and balance should result in an improvement of agility. However, there is evident lack of data regarding the influence of potential predictors on different agility manifestations. The aim of this study was to determine the gender-specific influence of speed, power, and balance on different agility tests. A total of 32 college-aged male athletes and 31 college-aged female athletes (age 20.02 ± 1.89 years) participated in this study. The subjects were mostly involved in team sports (soccer, team handball, basketball, and volleyball; 80% of men, and 75% of women), martial arts, gymnastics, and dance. Anthropometric variables consisted of body height, body weight, and the body mass index. Five agility tests were used: a t-test (T-TEST), zig-zag test, 20-yard shuttle test, agility test with a 180-degree turn, and forward-backward running agility test (FWDBWD). Other tests included 1 jumping ability power test (squat jump, SQJ), 2 balance tests to determine the overall stability index and an overall limit of stability score (both measured by Biodex Balance System), and 2 running speed tests using a straight sprint for 10 and 20 m (S10 and S20, respectively). A reliability analysis showed that all the agility tests were reliable. Multiple regression and correlation analysis found speed and power (among women), and balance (among men), as most significant predictors of agility. The highest Pearson's correlation in both genders is found between the results of the FWDBWD and S10M tests (0.77 and 0.81 for men and women, respectively; p < 0.05). Power, measured using the SQJ, is significantly (p < 0.05) related to FWDBWD and T-TEST results but only for women (-0.44; -0.41). The balance measures were significantly related to the agility

  7. DoD Information Assurance and Agile: Challenges and Recommendations Gathered Through Interviews with Agile Program Managers and DoD Accreditation Reviewers

    DTIC Science & Technology

    2012-11-01

    testing and certification are found in industry, too (e.g., water- Scrum -fall). The Office of the Secretary of Defense and other organizations have...report titled Water- Scrum -Fall Is The Reality Of Agile For Most Organizations Today. This paper served as the inspiration for many related blog...adoption has diverged some from the original ideas described in the Agile Manifesto. Many adoptions resemble what Forrester labels “water- Scrum -fall

  8. An assessment of space shuttle flight software development processes

    NASA Technical Reports Server (NTRS)

    1993-01-01

    In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

  9. Enhanced detection of Terrestrial Gamma-Ray Flashes by AGILE

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Argan, A.; Ursi, A.; Gjesteland, T.; Fuschino, F.; Labanti, C.; Galli, M.; Tavani, M.; Pittori, C.; Verrecchia, F.; D'Amico, F.; Ostgaard, N.; Mereghetti, S.; Campana, R.; Cattaneo, P.; Bulgarelli, A.; Colafrancesco, S.; Dietrich, S.; Longo, F.; Gianotti, F.; Giommi, P.; Rappoldi, A.; Trifoglio, M.; Trois, A.

    2015-12-01

    At the end of March 2015 the onboard configuration of the AGILE satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-ray Flashes (TGFs), especially the short duration ones. We present here the characteristics of the new TGF sample after several months of stable operations with the new configuration. The configuration change was highly successful resulting in the detection of about 100 TGFs/month, an increase of a factor about 11 in TGFs detection rate with respect to previous configuration. As expected, the largest fraction of the new events has short duration, with a median duration of 80 microseconds. We also obtain a sample of events with simultaneous association, within 100 microseconds, with lightning sferics detected by the World Wide Lightning Location Network (WWLLN), confirming previous results reported by the Fermi mission. Given the high detection rate and the AGILE very low (+/-2.5°) orbital inclination, the new configuration provides the largest TGF detection rate surface density (TGFs / km2 / year) to date, opening space for correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region. Eventually, the events with associated simultaneous WWLLN sferics provide a highly reliable sample to probe the long-standing issue of the TGF maximal energy.

  10. Caffeine supplementation and reactive agility in elite youth soccer players.

    PubMed

    Jordan, J Bradley; Korgaokar, Ajit; Farley, Richard S; Coons, John M; Caputo, Jennifer L

    2014-05-01

    This study examined the effects of caffeine supplementation (6 mg·kg-1) on performance of a reactive agility test (RAT) in 17 elite, male, youth (M = 14 y) soccer players. Using a double-blind, repeated-measures design, players completed 4 days of testing on the RAT after a standardized warm-up. On day 1, anthropometric measurements were taken and players were accommodated to the RAT. On day 2, baseline performance was established. Caffeine or placebo conditions were randomly assigned on day 3 and the condition was reversed on day 4. Players completed 3 randomized trials of the RAT on days 2, 3, and 4 with at least 1 trial to the players' dominant and nondominant sides. There were no significant differences among conditions in reaction time (RT) to the dominant side, heart rates at any point of measurement, or ratings of perceived exertion (RPE) after completion of the warm-up. Caffeine produced faster RT to the nondominant side (P = .041) and higher RPE at the conclusion of the RAT (P = .013). The effect on the total time (TT) to complete the agility test to the nondominant side approached significance (P = .051). Sprint time and TT to either side did not differ. Caffeine supplementation may provide ergogenic benefit to elite, male, youth soccer players.

  11. Autonomous Guidance of Agile Small-scale Rotorcraft

    NASA Technical Reports Server (NTRS)

    Mettler, Bernard; Feron, Eric

    2004-01-01

    This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

  12. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes have been developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  13. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes were developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. The SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  14. A systematic development process for patient decision aids

    PubMed Central

    2013-01-01

    Background The original version of the International Patient Decision Aid Standards (IPDAS) recommended that patient decision aids (PtDAs) should be carefully developed, user-tested and open to scrutiny, with a well-documented and systematically applied development process. We carried out a review to check the relevance and scope of this quality dimension and, if necessary, to update it. Methods Our review drew on three sources: a) published papers describing PtDAs evaluated in randomised controlled trials and included in the most recent Cochrane Collaboration review; b) linked papers cited in the trial reports that described how the PtDAs had been developed; and c) papers and web reports outlining the development process used by organisations experienced in developing multiple PtDAs. We then developed an extended model of the development process indicating the various steps on which documentation is required, as well as a checklist to assess the frequency with which each of the elements was publicly reported. Results Key features common to all patient decision aid (PtDA) development processes include: scoping and design; development of a prototype; ‘alpha’ testing with patients and clinicians in an iterative process; ‘beta’ testing in ‘real life’ conditions (field tests); and production of a final version for use and/or further evaluation. Only about half of the published reports on the development of PtDAs that we reviewed appear to have been field tested with patients, and even fewer had been reviewed or tested by clinicians not involved in the development process. Very few described a distribution strategy, and surprisingly few (17%) described a method for reviewing and synthesizing the clinical evidence. We describe a model development process that includes all the original elements of the original IPDAS criterion, expanded to include consideration of format and distribution plans as well as prototype development. Conclusions The case for including

  15. Agile battle management efficiency for command, control, communications, computers and intelligence (C4I)

    NASA Astrophysics Data System (ADS)

    Blasch, Erik; Bélanger, Micheline

    2016-05-01

    Various operations such as civil-military co-operation (CIMIC) affairs require orchestration of communications, assets, and actors. A key component includes technology advancements to enable coordination among people and machines the ability to know where things are, who to coordinate with, and open and consistent lines of communication. In this paper, we explore concepts of battle management (BM) to support high-tempo emergency response scenarios such as a disaster action response team (DART). Three concepts highlighted of agile battle management (ABM) include source orchestration (e.g., sensors and domains), battle management language (BML) development (e.g., software and ontologies), and command and control (C2) coordination (e.g., people and visualization); which require correlation and de-confliction. These concepts of ABM support the physical, information, and cognitive domains for efficient command, control, communications, and information (C3I) to synchronize data and people for efficient and effective operations.

  16. Kedalion: NASA's Adaptable and Agile Hardware/Software Integration and Test Lab

    NASA Technical Reports Server (NTRS)

    Mangieri, Mark L.; Vice, Jason

    2011-01-01

    NASA fs Kedalion engineering analysis lab at Johnson Space Center is on the forefront of validating and using many contemporary avionics hardware/software development and integration techniques, which represent new paradigms to heritage NASA culture. Kedalion has validated many of the Orion hardware/software engineering techniques borrowed from the adjacent commercial aircraft avionics solution space, with the intention to build upon such techniques to better align with today fs aerospace market. Using agile techniques, commercial products, early rapid prototyping, in-house expertise and tools, and customer collaboration, Kedalion has demonstrated that cost effective contemporary paradigms hold the promise to serve future NASA endeavors within a diverse range of system domains. Kedalion provides a readily adaptable solution for medium/large scale integration projects. The Kedalion lab is currently serving as an in-line resource for the project and the Multipurpose Crew Vehicle (MPCV) program.

  17. Purifying biopharmaceuticals: knowledge-based chromatographic process development.

    PubMed

    Hanke, Alexander T; Ottens, Marcel

    2014-04-01

    The purification of biopharmaceuticals is commonly considered the bottleneck of the manufacturing process. Increasing product diversity, along with growing regulatory and economic constraints raise the need to adopt new rational, systematic, and generally applicable process development strategies. Liquid chromatography is the key step in most purification processes and a well-understood unit operation, yet this understanding is still rarely effectively utilized during process development. Knowledge of the composition of the mixture, the molecular properties of the solutes and how they interact with the resins are required to rationalise the design choices. Here, we provide an overview of the advances in the determination and measurement of these properties and interactions, and outline their use throughout the different stages of downstream process development.

  18. Scaleup of mild gasification to a process development unit

    SciTech Connect

    Campbell, J.A.L.; Carty, R.H.; Saladin, N.; Mead, J.; Foster, H.

    1992-11-01

    The overall objectives of this project is to develop the IGT Mild-Gasification (MILDGAS) process for near-term commercialization. The specific objectives of the program are to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for further design scaleup obtain large batches of coal-derived co-products for industrial evaluation prepare a detailed design of a demonstration unit develop technical and economic plans for commercialization of the MILDGAS process. During the first ten months of this project. the NEPA Application for construction and operation of the PDU facility at the SIUC site was written and submitted for approval. In addition, the process design for the PDU was completed, bid packages for the PDU modules were prepared and sent to a slate of prospective bidders, and bids were received from the participating bidders.

  19. Guideline Development Process in a Public Workers' Compensation System.

    PubMed

    Javaher, Simone P

    2015-08-01

    Washington state's public workers' compensation system has had a formal process for developing and implementing evidence-based clinical practice guidelines since 2007. Collaborating with the Industrial Insurance Medical Advisory Committee and clinicians from the medical community, the Office of the Medical Director has provided leadership and staff support necessary to develop guidelines that have improved outcomes and reduced the number of potentially harmful procedures. Guidelines are selected according to a prioritization schema and follow a development process consistent with that of the national Institute of Medicine. Evaluation criteria are also applied. Guidelines continue to be developed to provide clinical recommendations for optimizing care and reducing risk of harm.

  20. VIEW OF PROCESS DEVELOPMENT PILE (PDP) TANK TOP, WITH VERTICAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF PROCESS DEVELOPMENT PILE (PDP) TANK TOP, WITH VERTICAL ELEMENTS IN BACKGROUND, LEVEL 0’, LOOKING NORTHWEST - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC