Science.gov

Sample records for agile development processes

  1. Developments in Agile Manufacturing

    SciTech Connect

    Clinesmith, M.G.

    1993-09-01

    As part of a project design initiative, Sandia National Laboratories and AlliedSignal Inc. Kansas City Division have joined efforts to develop a concurrent engineering capability for the manufacturing of complex precision components. The primary effort of this project, called Agile Manufacturing, is directed toward: (1) Understand the error associated with manufacturing and inspection. (2) Develop methods for correcting error. (3) Integrate diverse software technologies into a compatible process. The Agile Manufacturing System (AMS) is a system that integrates product design, manufacturing, and inspection into a closed loop, concurrent engineering process. The goal of developing the Agile Manufacturing System is to: (1) Optimize accuracy in manufacturing and inspection. (A) Use of softgage software for product evaluation. This will ensure ANSI Y14.5 compliance. (B) Establish and monitor bias between CMM and machine center. (C) Map probe deflection error and apply correction to inspection results. This applies to both on machine probing and CMM inspections. (D) Inspection process. (2) Compress the cycle time from product concept to production level manufacturing and verification. (3) Create a self-correcting process that feeds inspection results back into the machining process. (4) Link subordinate processes (cutting/probing path, softgage model, etc.) to the solid model definition.

  2. Agile Software Development

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  3. Agile Development Processes: Delivering a Successful Data Management Platform Now and in the Future

    NASA Astrophysics Data System (ADS)

    Deaubl, E.; Lowry, S.

    2007-10-01

    Developing a flexible, extensible architecture for scientific data archival and management is a monumental task under older, big design, up-front methodologies. We will describe how we are using agile development techniques in our service oriented architecture (SOA)-based platform to integrate astronomer and operator input into the development process, deliver functional software earlier, and ensure that the software is maintainable and extensible in the future.

  4. Developing communications requirements for Agile Product Realization

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1994-03-01

    Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.

  5. Agile

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2013-01-01

    This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.

  6. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

  7. Opening up the Agile Innovation Process

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

    The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

  8. Supporting Agile Development of Authorization Rules for SME Applications

    NASA Astrophysics Data System (ADS)

    Bartsch, Steffen; Sohr, Karsten; Bormann, Carsten

    Custom SME applications for collaboration and workflow have become affordable when implemented as Web applications employing Agile methodologies. Security engineering is still difficult with Agile development, though: heavy-weight processes put the improvements of Agile development at risk. We propose Agile security engineering and increased end-user involvement to improve Agile development with respect to authorization policy development. To support the authorization policy development, we introduce a simple and readable authorization rules language implemented in a Ruby on Rails authorization plugin that is employed in a real-world SME collaboration and workflow application. Also, we report on early findings of the language’s use in authorization policy development with domain experts.

  9. Teaching Agile Software Development: A Case Study

    ERIC Educational Resources Information Center

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  10. Agile Development Methods for Space Operations

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Webster, Chris

    2012-01-01

    Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

  11. Development of an agility assessment module for preliminary fighter design

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

    1996-01-01

    A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

  12. Lean and Agile Development of the AITS Ground Software System

    NASA Astrophysics Data System (ADS)

    Richters, Mark; Dutruel, Etienne; Mecredy, Nicolas

    2013-08-01

    We present the ongoing development of a new ground software system used for integrating, testing and operating spacecraft. The Advanced Integration and Test Services (AITS) project aims at providing a solution for electrical ground support equipment and mission control systems in future Astrium Space Transportation missions. Traditionally ESA ground or flight software development projects are conducted according to a waterfall-like process as specified in the ECSS-E-40 standard promoted by ESA in the European industry. In AITS a decision was taken to adopt an agile development process. This work could serve as a reference for future ESA software projects willing to apply agile concepts.

  13. Distributed agile software development for the SKA

    NASA Astrophysics Data System (ADS)

    Wicenec, Andreas; Parsons, Rebecca; Kitaeff, Slava; Vinsen, Kevin; Wu, Chen; Nelson, Paul; Reed, David

    2012-09-01

    The SKA software will most probably be developed by many groups distributed across the globe and coming from dierent backgrounds, like industries and research institutions. The SKA software subsystems will have to cover a very wide range of dierent areas, but still they have to react and work together like a single system to achieve the scientic goals and satisfy the challenging data ow requirements. Designing and developing such a system in a distributed fashion requires proper tools and the setup of an environment to allow for ecient detection and tracking of interface and integration issues in particular in a timely way. Agile development can provide much faster feedback mechanisms and also much tighter collaboration between the customer (scientist) and the developer. Continuous integration and continuous deployment on the other hand can provide much faster feedback of integration issues from the system level to the subsystem developers. This paper describes the results obtained from trialing a potential SKA development environment based on existing science software development processes like ALMA, the expected distribution of the groups potentially involved in the SKA development and experience gained in the development of large scale commercial software projects.

  14. The NERV Methodology: Non-Functional Requirements Elicitation, Reasoning and Validation in Agile Processes

    ERIC Educational Resources Information Center

    Domah, Darshan

    2013-01-01

    Agile software development has become very popular around the world in recent years, with methods such as Scrum and Extreme Programming (XP). Literature suggests that functionality is the primary focus in Agile processes while non-functional requirements (NFR) are either ignored or ill-defined. However, for software to be of good quality both…

  15. Planning and scheduling for agile manufacturers: The Pantex Process Model

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Tumquist, M.A.

    1998-02-01

    Effective use of resources that are shared among multiple products or processes is critical for agile manufacturing. This paper describes the development and implementation of a computerized model to support production planning in a complex manufacturing system at the Pantex Plant, a US Department of Energy facility. The model integrates two different production processes (nuclear weapon disposal and stockpile evaluation) that use common facilities and personnel at the plant. The two production processes are characteristic of flow-shop and job shop operations. The model reflects the interactions of scheduling constraints, material flow constraints, and the availability of required technicians and facilities. Operational results show significant productivity increases from use of the model.

  16. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

  17. Peridigm summary report : lessons learned in development with agile components.

    SciTech Connect

    Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John; Parks, Michael L.

    2011-09-01

    This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of this approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.

  18. Future Research in Agile Systems Development: Applying Open Innovation Principles Within the Agile Organisation

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Morgan, Lorraine

    A particular strength of agile approaches is that they move away from ‘introverted' development and intimately involve the customer in all areas of development, supposedly leading to the development of a more innovative and hence more valuable information system. However, we argue that a single customer representative is too narrow a focus to adopt and that involvement of stakeholders beyond the software development itself is still often quite weak and in some cases non-existent. In response, we argue that current thinking regarding innovation in agile development needs to be extended to include multiple stakeholders outside the business unit. This paper explores the intra-organisational applicability and implications of open innovation in agile systems development. Additionally, it argues for a different perspective of project management that includes collaboration and knowledge-sharing with other business units, customers, partners, and other relevant stakeholders pertinent to the business success of an organisation, thus embracing open innovation principles.

  19. A Case Study of Coordination in Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Hole, Steinar; Moe, Nils Brede

    Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

  20. How Can Agile Practices Minimize Global Software Development Co-ordination Risks?

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Babar, Muhammad Ali; Verner, June

    The distribution of project stakeholders in Global Software Development (GSD) projects provides significant risks related to project communication, coordination and control processes. There is growing interest in applying agile practices in GSD projects in order to leverage the advantages of both approaches. In some cases, GSD project managers use agile practices to reduce project distribution challenges. We use an existing coordination framework to identify GSD coordination problems due to temporal, geographical and socio-cultural distances. An industry-based case study is used to describe, explore and explain the use of agile practices to reduce development coordination challenges.

  1. Agile informatics: application of agile project management to the development of a personal health application.

    PubMed

    Chung, Jeanhee; Pankey, Evan; Norris, Ryan J

    2007-01-01

    We describe the application of the Agile method-- a short iteration cycle, user responsive, measurable software development approach-- to the project management of a modular personal health record, iHealthSpace, to be deployed to the patients and providers of a large academic primary care practice. PMID:18694014

  2. Modern Enterprise Systems as Enablers of Agile Development

    NASA Astrophysics Data System (ADS)

    Fredriksson, Odd; Ljung, Lennart

    Traditional ES technology and traditional project management methods are supporting and matching each other. But they are not supporting the critical success conditions for ES development in an effective way. Although the findings from one case study of a successful modern ES change project is not strong empirical evidence, we carefully propose that the new modern ES technology is supporting and matching agile project management methods. In other words, it provides the required flexibility which makes it possible to put into practice the agile way of running projects, both for the system supplier and for the customer. In addition, we propose that the combination of modern ES technology and agile project management methods are more appropriate for supporting the realization of critical success conditions for ES development. The main purpose of this chapter is to compare critical success conditions for modern enterprise systems development projects with critical success conditions for agile information systems development projects.

  3. Development of EarthCube Governance: An Agile Approach

    NASA Astrophysics Data System (ADS)

    Pearthree, G.; Allison, M. L.; Patten, K.

    2013-12-01

    Governance of geosciences cyberinfrastructure is a complex and essential undertaking, critical in enabling distributed knowledge communities to collaborate and communicate across disciplines, distances, and cultures. Advancing science with respect to 'grand challenges," such as global climate change, weather prediction, and core fundamental science, depends not just on technical cyber systems, but also on social systems for strategic planning, decision-making, project management, learning, teaching, and building a community of practice. Simply put, a robust, agile technical system depends on an equally robust and agile social system. Cyberinfrastructure development is wrapped in social, organizational and governance challenges, which may significantly impede progress. An agile development process is underway for governance of transformative investments in geosciences cyberinfrastructure through the NSF EarthCube initiative. Agile development is iterative and incremental, and promotes adaptive planning and rapid and flexible response. Such iterative deployment across a variety of EarthCube stakeholders encourages transparency, consensus, accountability, and inclusiveness. A project Secretariat acts as the coordinating body, carrying out duties for planning, organizing, communicating, and reporting. A broad coalition of stakeholder groups comprises an Assembly (Mainstream Scientists, Cyberinfrastructure Institutions, Information Technology/Computer Sciences, NSF EarthCube Investigators, Science Communities, EarthCube End-User Workshop Organizers, Professional Societies) to serve as a preliminary venue for identifying, evaluating, and testing potential governance models. To offer opportunity for broader end-user input, a crowd-source approach will engage stakeholders not involved otherwise. An Advisory Committee from the Earth, ocean, atmosphere, social, computer and library sciences is guiding the process from a high-level policy point of view. Developmental

  4. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-09-01

    This paper describes a product realization process developed and demonstrated at Sandia by the A-PRIMED (Agile Product Realization for Innovative Electro MEchanical Devices) project that integrates many of the key components of ``agile manufacturing`` into a complete, design-to-production process. Evidence indicates that the process has reduced the product realization cycle and assured product quality. Products included discriminators for a robotic quick change adapter and for an electronic defense system. These discriminators, built using A-PRIMED, met random vibration requirements and had life cycles that far surpass the performance obtained from earlier efforts.

  5. Adopting best practices: "Agility" moves from software development to healthcare project management.

    PubMed

    Kitzmiller, Rebecca; Hunt, Eleanor; Sproat, Sara Breckenridge

    2006-01-01

    It is time for a change in mindset in how nurses operationalize system implementations and manage projects. Computers and systems have evolved over time from unwieldy mysterious machines of the past to ubiquitous computer use in every aspect of daily lives and work sites. Yet, disconcertingly, the process used to implement these systems has not evolved. Technology implementation does not need to be a struggle. It is time to adapt traditional plan-driven implementation methods to incorporate agile techniques. Agility is a concept borrowed from software development and is presented here because it encourages flexibility, adaptation, and continuous learning as part of the implementation process. Agility values communication and harnesses change to an advantage, which facilitates the natural evolution of an adaptable implementation process. Specific examples of agility in an implementation are described, and plan-driven implementation stages are adapted to incorporate relevant agile techniques. This comparison demonstrates how an agile approach enhances traditional implementation techniques to meet the demands of today's complex healthcare environments. PMID:16554690

  6. Creativity in Agile Systems Development: A Literature Review

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Wang, Xiaofeng; Fitzgerald, Brian

    Proponents of agile methods claim that enabling, fostering and driving creativity is the key motivation that differentiates agile methods from their more traditional, beauraucratic counterparts. However, there is very little rigorous research to support this claim. Like most of their predecessors, the development and promotion of these methods has been almost entirely driven by practitioners and consultants, with little objective validation from the research community. This lack of validation is particularly relevant for SMEs, given that many of their project teams typify the environment to which agile methods are most suited i.e. small, co-located teams with diverse, blended skills in unstructured, sometimes even chaotic surroundings. This paper uses creativity theory as a lens to review the current agile method literature to understand exactly how much we know about the extent to which creativity actually occurs in these agile environments. The study reveals many gaps and conflict of opinion in the body of knowledge in its current state and identifies many avenues for further research.

  7. A Capstone Course on Agile Software Development Using Scrum

    ERIC Educational Resources Information Center

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  8. Agile enterprise development framework utilizing services principles for building pervasive security

    NASA Astrophysics Data System (ADS)

    Farroha, Deborah; Farroha, Bassam

    2011-06-01

    We are in an environment of continuously changing mission requirements and therefore our Information Systems must adapt to accomplish new tasks, quicker, in a more proficient manner. Agility is the only way we will be able to keep up with this change. But there are subtleties that must be considered as we adopt various agile methods: secure, protect, control and authenticate are all elements needed to posture our Information Technology systems to counteract the real and perceived threats in today's environment. Many systems have been tasked to ingest process and analyze different data sets than they were originally designed for and they have to interact with multiple new systems that were unaccounted for at design time. Leveraging the tenets of security, we have devised a new framework that takes agility into a new realm where the product will built to work in a service-based environment but is developed using agile processes. Even though these two criteria promise to hone the development effort, they actually contradict each other in philosophy where Services require stable interfaces, while Agile focuses on being flexible and tolerate changes up to much later stages of development. This framework is focused on enabling a successful product development that capitalizes on both philosophies.

  9. Agile Software Development Methods: A Comparative Review1

    NASA Astrophysics Data System (ADS)

    Abrahamsson, Pekka; Oza, Nilay; Siponen, Mikko T.

    Although agile software development methods have caught the attention of software engineers and researchers worldwide, scientific research still remains quite scarce. The aim of this study is to order and make sense of the different agile approaches that have been proposed. This comparative review is performed from the standpoint of using the following features as the analytical perspectives: project management support, life-cycle coverage, type of practical guidance, adaptability in actual use, type of research objectives and existence of empirical evidence. The results show that agile software development methods cover, without offering any rationale, different phases of the software development life-cycle and that most of these methods fail to provide adequate project management support. Moreover, quite a few methods continue to offer little concrete guidance on how to use their solutions or how to adapt them in different development situations. Empirical evidence after ten years of application remains quite limited. Based on the results, new directions on agile methods are outlined.

  10. Impact of Agile Software Development Model on Software Maintainability

    ERIC Educational Resources Information Center

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  11. Cross Sectional Study of Agile Software Development Methods and Project Performance

    ERIC Educational Resources Information Center

    Lambert, Tracy

    2011-01-01

    Agile software development methods, characterized by delivering customer value via incremental and iterative time-boxed development processes, have moved into the mainstream of the Information Technology (IT) industry. However, despite a growing body of research which suggests that a predictive manufacturing approach, with big up-front…

  12. Development of a Computer Program for Analyzing Preliminary Aircraft Configurations in Relationship to Emerging Agility Metrics

    NASA Technical Reports Server (NTRS)

    Bauer, Brent

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition, one study illustrates the module's ability to optimize a configuration's agility performance.

  13. Agile based "Semi-"Automated Data ingest process : ORNL DAAC example

    NASA Astrophysics Data System (ADS)

    Santhana Vannan, S. K.; Beaty, T.; Cook, R. B.; Devarakonda, R.; Hook, L.; Wei, Y.; Wright, D.

    2015-12-01

    The ORNL DAAC archives and publishes data and information relevant to biogeochemical, ecological, and environmental processes. The data archived at the ORNL DAAC must be well formatted, self-descriptive, and documented, as well as referenced in a peer-reviewed publication. The ORNL DAAC ingest team curates diverse data sets from multiple data providers simultaneously. To streamline the ingest process, the data set submission process at the ORNL DAAC has been recently updated to use an agile process and a semi-automated workflow system has been developed to provide a consistent data provider experience and to create a uniform data product. The goals of semi-automated agile ingest process are to: 1.Provide the ability to track a data set from acceptance to publication 2. Automate steps that can be automated to improve efficiencies and reduce redundancy 3.Update legacy ingest infrastructure 4.Provide a centralized system to manage the various aspects of ingest. This talk will cover the agile methodology, workflow, and tools developed through this system.

  14. A Roadmap for using Agile Development in a Traditional System

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas

    2006-01-01

    I. Ensemble Development Group: a) Produces activity planning software for in spacecraft; b) Built on Eclipse Rich Client Platform (open source development and runtime software); c) Funded by multiple sources including the Mars Technology Program; d) Incorporated the use of Agile Development. II. Next Generation Uplink Planning System: a) Researches the Activity Planning and Sequencing Subsystem for Mars Science Laboratory (APSS); b) APSS includes Ensemble, Activity Modeling, Constraint Checking, Command Editing and Sequencing tools plus other uplink generation utilities; c) Funded by the Mars Technology Program; d) Integrates all of the tools for APSS.

  15. RFID-Based Critical Path Expert System for Agility Manufacture Process Management

    NASA Astrophysics Data System (ADS)

    Cheng, Haifang; Xiang, Yuli

    This paper presents a critical path expert system for the agility manufacture process management based on radio frequency identification (RFID) technology. The paper explores that the agility manufacture processes can be visible and controllable with RFID. The critical paths or activities can be easily found out and tracked by the RFID tracing technology. And the expert system can optimize the bottle neck of the task process of the agility management with the critical path adjusting and reforming method. Finally, the paper gives a simple application example of the system to discuss how to adjust the critical paths and how to make the process more agility and flexibility with the critical path expert system. With an RFID-based critical path expert system, the agility manufacture process management will be more effective and efficient.

  16. Towards a Framework for Using Agile Approaches in Global Software Development

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Ali Babar, Muhammad; Verner, June

    As agile methods and Global Software Development (GSD) are become increasingly popular, GSD project managers have been exploring the viability of using agile approaches in their development environments. Despite the expected benefits of using an agile approach with a GSD project, the overall combining mechanisms of the two approaches are not clearly understood. To address this challenge, we propose a conceptual framework, based on the research literature. This framework is expected to aid a project manager in deciding what agile strategies are effective for a particular GSD project, taking into account project context. We use an industry-based case study to explore the components of our conceptual framework. Our case study is planned and conducted according to specific published case study guidelines. We identify the agile practices and agile supporting practices used by a GSD project manager in our case study and conclude with future research directions.

  17. Chaste: using agile programming techniques to develop computational biology software.

    PubMed

    Pitt-Francis, Joe; Bernabeu, Miguel O; Cooper, Jonathan; Garny, Alan; Momtahan, Lee; Osborne, James; Pathmanathan, Pras; Rodriguez, Blanca; Whiteley, Jonathan P; Gavaghan, David J

    2008-09-13

    Cardiac modelling is the area of physiome modelling where the available simulation software is perhaps most mature, and it therefore provides an excellent starting point for considering the software requirements for the wider physiome community. In this paper, we will begin by introducing some of the most advanced existing software packages for simulating cardiac electrical activity. We consider the software development methods used in producing codes of this type, and discuss their use of numerical algorithms, relative computational efficiency, usability, robustness and extensibility. We then go on to describe a class of software development methodologies known as test-driven agile methods and argue that such methods are more suitable for scientific software development than the traditional academic approaches. A case study is a project of our own, Cancer, Heart and Soft Tissue Environment, which is a library of computational biology software that began as an experiment in the use of agile programming methods. We present our experiences with a review of our progress thus far, focusing on the advantages and disadvantages of this new approach compared with the development methods used in some existing packages. We conclude by considering whether the likely wider needs of the cardiac modelling community are currently being met and suggest that, in order to respond effectively to changing requirements, it is essential that these codes should be more malleable. Such codes will allow for reliable extensions to include both detailed mathematical models--of the heart and other organs--and more efficient numerical techniques that are currently being developed by many research groups worldwide. PMID:18565813

  18. Agile methods in biomedical software development: a multi-site experience report

    PubMed Central

    Kane, David W; Hohman, Moses M; Cerami, Ethan G; McCormick, Michael W; Kuhlmman, Karl F; Byrd, Jeff A

    2006-01-01

    Background Agile is an iterative approach to software development that relies on strong collaboration and automation to keep pace with dynamic environments. We have successfully used agile development approaches to create and maintain biomedical software, including software for bioinformatics. This paper reports on a qualitative study of our experiences using these methods. Results We have found that agile methods are well suited to the exploratory and iterative nature of scientific inquiry. They provide a robust framework for reproducing scientific results and for developing clinical support systems. The agile development approach also provides a model for collaboration between software engineers and researchers. We present our experience using agile methodologies in projects at six different biomedical software development organizations. The organizations include academic, commercial and government development teams, and included both bioinformatics and clinical support applications. We found that agile practices were a match for the needs of our biomedical projects and contributed to the success of our organizations. Conclusion We found that the agile development approach was a good fit for our organizations, and that these practices should be applicable and valuable to other biomedical software development efforts. Although we found differences in how agile methods were used, we were also able to identify a set of core practices that were common to all of the groups, and that could be a focus for others seeking to adopt these methods. PMID:16734914

  19. The Impacts of Agile Development Methodology Use on Project Success: A Contingency View

    ERIC Educational Resources Information Center

    Tripp, John F.

    2012-01-01

    Agile Information Systems Development Methods have emerged in the past decade as an alternative manner of managing the work and delivery of information systems development teams, with a large number of organizations reporting the adoption & use of agile methods. The practitioners of these methods make broad claims as to the benefits of their…

  20. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Diegert, K.V.; Ashby, M.R.; Parratt, S.W.; Benavides, G.L.; Jones, R.E.; Longcope, D.B.

    1995-08-01

    This paper describes a product realization process developed at Sandia National Laboratories by the A-PRIMED project that integrates many of the key components of ``agile manufacturing`` into a complete, step-by-step, design-to-production process. For three separate product realization efforts, each geared to a different set of requirements, A-PRIMED demonstrated product realization of a custom device in less than a month. A-PRIMED used a discriminator (a precision electro-mechanical device) as the demonstration device, but the process is readily adaptable to other electro-mechanical products. The process begins with a qualified design parameter space. From that point, the product realization process encompasses all facets of requirements development, analysis and testing, design, manufacturing, robotic assembly and quality assurance, as well as product data management and concurrent engineering. In developing the product realization process, A-PRIMED employed an iterative approach whereby after each of three builds, the process was reviewed and refinements made on the basis of lessons learned. This paper describes the integration of project functions and product realization technologies, with references to reports detailing specific facets of the overall process. The process described herein represents the outcome of an empirically-based process development effort that on repeated iterations, was proven successful.

  1. Micro-milling process improvement using an agile pulse-shaping fiber laser

    NASA Astrophysics Data System (ADS)

    Gay, David; Cournoyer, Alain; Deladurantaye, Pascal; Briand, Martin; Roy, Vincent; Labranche, Bruno; Levesque, Marc; Taillon, Y.

    2009-06-01

    We demonstrate the usefulness of INO's pulse-shaping fiber laser platform to rapidly develop complex laser micromachining processes. The versatility of such laser sources allows for straightforward control of the emitting energy envelop on the nanosecond timescale to create multi-amplitude level pulses and/or multi-pulse regimes. The pulses are amplified in an amplifier chain in a MOPA configuration that delivers output energy per pulse up to 60 μJ at 1064 nm at a repetition rate of 200 kHz with excellent beam quality (M2 < 1.1) and narrow line widths suitable for efficient frequency conversion. Also, their pulse-on-demand and pulse-to-pulse shape selection capability at high repetition rates makes those agile laser sources suitable for the implementation of high-throughput complex laser processing. Micro-milling experiments were carried out on two metals, aluminum and stainless steel, having very different thermal properties. For aluminum, our results show that the material removal efficiency depends strongly on the pulse shape, especially near the ablation threshold, and can be maximized to develop efficient laser micro-milling processes. But, the material removal efficiency is not always correlated with a good surface quality. However, the roughness of the milled surface can be improved by removing a few layers of material using another type of pulse shape. The agility of INO's fiber laser enables the implementation of a fast laser process including two steps employing different pulse characteristics for maximizing the material removal rate and obtaining a good surface quality at the same time. A comparison of material removal efficiency with stainless steel, well known to be difficult to mill on the micron scale, is also presented.

  2. A process for the agile product realization of electromechanical devices (A-primed)

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1996-02-01

    This paper describes a product realization process developed at Sandia National Laboratories by the A-PRIMED project that integrates many of the key components of ``agile manufacturing`` (Nagel & Dove, 1992) into a complete, step-by-step, design-to-production process. For two separate product realization efforts, each geared to a different set of requirements, A-PRIMED demonstrated product realization of a custom device in less than a month. A-PRIMED used a discriminator (a precision electro mechanical device) as the demonstration device, but the process is readily adaptable to other electro mechanical products. The process begins with a qualified design parameter space (Diegert et al, 1995). From that point, the product realization process encompasses all facets of requirements development, analysis and testing, design, manufacturing, robot assembly and quality assurance, as well as product data management and concurrent engineering. In developing the product realization process, A-PRIMED employed an iterative approach whereby after each build, the process was reviewed and refinements were made on the basis of lessons learned. This paper describes the integration of project functions and product realization technologies to develop a product realization process that on repeated iterations, was proven successful.

  3. Development of perceived competence, tactical skills, motivation, technical skills, and speed and agility in young soccer players.

    PubMed

    Forsman, Hannele; Gråstén, Arto; Blomqvist, Minna; Davids, Keith; Liukkonen, Jarmo; Konttinen, Niilo

    2016-07-01

    The objective of this 1-year, longitudinal study was to examine the development of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics of young Finnish soccer players. We also examined associations between latent growth models of perceived competence and other recorded variables. Participants were 288 competitive male soccer players ranging from 12 to 14 years (12.7 ± 0.6) from 16 soccer clubs. Players completed the self-assessments of perceived competence, tactical skills, and motivation, and participated in technical, and speed and agility tests. Results of this study showed that players' levels of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics remained relatively high and stable across the period of 1 year. Positive relationships were found between these levels and changes in perceived competence and motivation, and levels of perceived competence and speed and agility characteristics. Together these results illustrate the multi-dimensional nature of talent development processes in soccer. Moreover, it seems crucial in coaching to support the development of perceived competence and motivation in young soccer players and that it might be even more important in later maturing players. PMID:26708723

  4. Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

    PubMed

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  5. Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

    PubMed Central

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  6. Human factors in agile manufacturing

    SciTech Connect

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  7. Agile in Large-Scale Development Workshop: Coaching, Transitioning and Practicing

    NASA Astrophysics Data System (ADS)

    Nilsson, Thomas; Larsson, Andreas

    Agile in large-scale and complex development presents its own set of problems, both how to practice, transition and coaching. This workshop aims at bringing persons interested in this topic together to share tools, techniques and insights. The workshop will follow the increasingly popular “lightning talk + open space” format.

  8. Some Findings Concerning Requirements in Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  9. Collaboration, Communication and Co-ordination in Agile Software Development Practice

    NASA Astrophysics Data System (ADS)

    Robinson, Hugh; Sharp, Helen

    This chapter analyses the results of a series of observational studies of agile software developmentagile software development teams, identifying commonalities in collaboration, co-ordination and communication activities. Pairing and customer collaborationcustomer collaboration are focussed on to illustrate the nature of collaboration and communication, as are two simple physical artefacts that emerged through analysis as being an information-rich focal point for the co-ordination of collaboration and communication activities. The analysis shows that pairingpairing has common characteristics across all teams, while customer collaboration differs between the teams depending on the application and organisational context of development.

  10. Modeling and Developing the Information System for the SuperAGILE Experiment

    NASA Astrophysics Data System (ADS)

    Lazzarotto, F.; Costa, E.; del Monte, E.; Feroci, M.

    2004-07-01

    We will present some formal description of the SuperAGILE (SA) detection system data, the relationships among them and the operations applied on data, with the aid of instruments such as Entity-Relationship (E-R) and UML diagrams. We just realized functions of reception, pre-processing, archiving and analysis on SA data making use of Object Oriented and SQL open source software instruments.

  11. Insights into Global Health Practice from the Agile Software Development Movement

    PubMed Central

    Flood, David; Chary, Anita; Austad, Kirsten; Diaz, Anne Kraemer; García, Pablo; Martinez, Boris; Canú, Waleska López; Rohloff, Peter

    2016-01-01

    Global health practitioners may feel frustration that current models of global health research, delivery, and implementation are overly focused on specific interventions, slow to provide health services in the field, and relatively ill-equipped to adapt to local contexts. Adapting design principles from the agile software development movement, we propose an analogous approach to designing global health programs that emphasizes tight integration between research and implementation, early involvement of ground-level health workers and program beneficiaries, and rapid cycles of iterative program improvement. Using examples from our own fieldwork, we illustrate the potential of ‘agile global health’ and reflect on the limitations, trade-offs, and implications of this approach. PMID:27134081

  12. Are we unnecessarily constraining the agility of complex process-based models?

    NASA Astrophysics Data System (ADS)

    Mendoza, Pablo A.; Clark, Martyn P.; Barlage, Michael; Rajagopalan, Balaji; Samaniego, Luis; Abramowitz, Gab; Gupta, Hoshin

    2015-01-01

    In this commentary we suggest that hydrologists and land-surface modelers may be unnecessarily constraining the behavioral agility of very complex physics-based models. We argue that the relatively poor performance of such models can occur due to restrictions on their ability to refine their portrayal of physical processes, in part because of strong a priori constraints in: (i) the representation of spatial variability and hydrologic connectivity, (ii) the choice of model parameterizations, and (iii) the choice of model parameter values. We provide a specific example of problems associated with strong a priori constraints on parameters in a land surface model. Moving forward, we assert that improving hydrological models requires integrating the strengths of the "physics-based" modeling philosophy (which relies on prior knowledge of hydrologic processes) with the strengths of the "conceptual" modeling philosophy (which relies on data driven inference). Such integration will accelerate progress on methods to define and discriminate among competing modeling options, which should be ideally incorporated in agile modeling frameworks and tested through a diagnostic evaluation approach.

  13. Accelerating Software Development through Agile Practices--A Case Study of a Small-Scale, Time-Intensive Web Development Project at a College-Level IT Competition

    ERIC Educational Resources Information Center

    Zhang, Xuesong; Dorn, Bradley

    2012-01-01

    Agile development has received increasing interest both in industry and academia due to its benefits in developing software quickly, meeting customer needs, and keeping pace with the rapidly changing requirements. However, agile practices and scrum in particular have been mainly tested in mid- to large-size projects. In this paper, we present…

  14. Bringing Agility to Business Process Management: Rules Deployment in an SOA

    NASA Astrophysics Data System (ADS)

    El Kharbili, Marwane; Keil, Tobias

    Business process management (BPM) has emerged as paradigm for integrating business strategies and enterprise architecture (EA). In this context, BPM implementation on top of web-service-based service oriented architectures is an accepted approach as shown by great amount of literature. One concern in this regard is how-to make BPs reactive to change. Our approach to the problem is the integration of business rule management (BRM) and BPM by allowing modeling of decisions hard-coded in BPs as separate business rules (BRs). These BRs become EA assets and need to be exploited when executing BPs. We motivate why BPM needs agility and discuss what requirements on BPM this poses. This paper presents prototyping work conducted at a BP modeling and analysis vendor which weeks to showcase how using business rule management (BRM) as a mean for modeling decisions can help achieve a much sought-after agility to BPM. This prototype relies on the integrated modeling of business rules (BRs) and BPs, and rule deployment as web services part of an SOA.

  15. Agility enabled by the SEMATECH CIM framework

    NASA Astrophysics Data System (ADS)

    Hawker, Scott; Waskiewicz, Fred

    1997-01-01

    The survivor in today's market environment is agile: able to survive and thrive in a market place marked by rapid, continuous change. For manufacturers, this includes an ability to rapidly develop, deploy and reconfigure manufacturing information and control systems. The SEMATECH CIM framework defines an application integration architecture and standard application components that enable agile manufacturing information and control systems. Further, the CIM framework and its evolution process foster virtual organizations of suppliers and manufacturers, combining their products and capabilities into an agile manufacturing information and control system.

  16. Agile Project Management for e-Learning Developments

    ERIC Educational Resources Information Center

    Doherty, Iain

    2010-01-01

    We outline the project management tactics that we developed in praxis in order to manage elearning projects and show how our tactics were enhanced through implementing project management techniques from a formal project management methodology. Two key factors have contributed to our project management success. The first is maintaining a clear…

  17. An agile implementation of SCRUM

    NASA Astrophysics Data System (ADS)

    Gannon, Michele

    Is Agile a way to cut corners? To some, the use of an Agile Software Development Methodology has a negative connotation - “ Oh, you're just not producing any documentation” . So can a team with no experience in Agile successfully implement and use SCRUM?

  18. Agile Methods for Open Source Safety-Critical Software

    PubMed Central

    Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-01-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  19. Agile Methods for Open Source Safety-Critical Software.

    PubMed

    Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-08-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  20. Introduction to Stand-up Meetings in Agile Methods

    NASA Astrophysics Data System (ADS)

    Hasnain, Eisha; Hall, Tracy

    2009-05-01

    In recent years, agile methods have become more popular in the software industry. Agile methods are a new approach compared to plan-driven approaches. One of the most important shifts in adopting an agile approach is the central focus given to people in the process. This is exemplified by the independence afforded to developers in the development work they do. This work investigates the opinions of practitioners about daily stand-up meetings in the agile methods and the role of developer in that. For our investigation we joined a yahoo group called "Extreme Programming". Our investigation suggests that although trust is an important factor in agile methods. But stand-ups are not the place to build trust.

  1. ISS Double-Gimbaled CMG Subsystem Simulation Using the Agile Development Method

    NASA Technical Reports Server (NTRS)

    Inampudi, Ravi

    2016-01-01

    This paper presents an evolutionary approach in simulating a cluster of 4 Control Moment Gyros (CMG) on the International Space Station (ISS) using a common sense approach (the agile development method) for concurrent mathematical modeling and simulation of the CMG subsystem. This simulation is part of Training systems for the 21st Century simulator which will provide training for crew members, instructors, and flight controllers. The basic idea of how the CMGs on the space station are used for its non-propulsive attitude control is briefly explained to set up the context for simulating a CMG subsystem. Next different reference frames and the detailed equations of motion (EOM) for multiple double-gimbal variable-speed control moment gyroscopes (DGVs) are presented. Fixing some of the terms in the EOM becomes the special case EOM for ISS's double-gimbaled fixed speed CMGs. CMG simulation development using the agile development method is presented in which customer's requirements and solutions evolve through iterative analysis, design, coding, unit testing and acceptance testing. At the end of the iteration a set of features implemented in that iteration are demonstrated to the flight controllers thus creating a short feedback loop and helping in creating adaptive development cycles. The unified modeling language (UML) tool is used in illustrating the user stories, class designs and sequence diagrams. This incremental development approach of mathematical modeling and simulating the CMG subsystem involved the development team and the customer early on, thus improving the quality of the working CMG system in each iteration and helping the team to accurately predict the cost, schedule and delivery of the software.

  2. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    ERIC Educational Resources Information Center

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  3. Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

    NASA Technical Reports Server (NTRS)

    Wetherholt, Martha

    2016-01-01

    To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

  4. Tools for Supporting Distributed Agile Project Planning

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Maurer, Frank; Morgan, Robert; Oliveira, Josyleuda

    Agile project planning plays an important part in agile software development. In distributed settings, project planning is severely impacted by the lack of face-to-face communication and the inability to share paper index cards amongst all meeting participants. To address these issues, several distributed agile planning tools were developed. The tools vary in features, functions and running platforms. In this chapter, we first summarize the requirements for distributed agile planning. Then we give an overview on existing agile planning tools. We also evaluate existing tools based on tool requirements. Finally, we present some practical advices for both designers and users of distributed agile planning tools.

  5. Lean Mission Operations Systems Design - Using Agile and Lean Development Principles for Mission Operations Design and Development

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2014-01-01

    The Resource Prospector Mission seeks to rove the lunar surface with an in-situ resource utilization payload in search of volatiles at a polar region. The mission operations system (MOS) will need to perform the short-duration mission while taking advantage of the near real time control that the short one-way light time to the Moon provides. To maximize our use of limited resources for the design and development of the MOS we are utilizing agile and lean methods derived from our previous experience with applying these methods to software. By using methods such as "say it then sim it" we will spend less time in meetings and more time focused on the one outcome that counts - the effective utilization of our assets on the Moon to meet mission objectives.

  6. Achieving agility through parameter space qualification

    SciTech Connect

    Diegert, K.V.; Easterling, R.G.; Ashby, M.R.; Benavides, G.L.; Forsythe, C.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-02-01

    The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.

  7. An Investigation of Agility Issues in Scrum Teams Using Agility Indicators

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Wang, Xiaofeng

    Agile software development methods have emerged and become increasingly popular in recent years; yet the issues encountered by software development teams that strive to achieve agility using agile methods are yet to be explored systematically. Built upon a previous study that has established a set of indicators of agility, this study investigates what issues are manifested in software development teams using agile methods. It is focussed on Scrum teams particularly. In other words, the goal of the chapter is to evaluate Scrum teams using agility indicators and therefore to further validate previously presented agility indicators within the additional cases. A multiple case study research method is employed. The findings of the study reveal that the teams using Scrum do not necessarily achieve agility in terms of team autonomy, sharing, stability and embraced uncertainty. The possible reasons include previous organizational plan-driven culture, resistance towards the Scrum roles and changing resources.

  8. Development and evaluation of an inverse solution technique for studying helicopter maneuverability and agility

    NASA Technical Reports Server (NTRS)

    Whalley, Matthew S.

    1991-01-01

    An inverse solution technique for determining the maximum maneuvering performance of a helicopter using smooth, pilotlike control inputs is presented. Also described is a pilot simulation experiment performed to investigate the accuracy of the solution resulting from this technique. The maneuverability and agility capability of the helicopter math model was varied by varying the pitch and roll damping, the maximum pitch and roll rate, and the maximum load-factor capability. Three maneuvers were investigated: a 180-deg turn, a longitudinal pop-up, and a lateral jink. The inverse solution technique yielded accurate predictions of pilot-in-the-loop maneuvering performance for two of the three maneuvers.

  9. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  10. Utilization of an agility assessment module in analysis and optimization of preliminary fighter configuration

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Biezad, Daniel

    1996-01-01

    A study has been conducted to develop and to analyze a FORTRAN computer code for performing agility analysis on fighter aircraft configurations. This program is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. The validity of the existing code was evaluated by comparing with existing flight test data. A FORTRAN program was developed for a specific metric, PM (Pointing Margin), as part of the agility module. Example trade studies using the agility module along with ACSYNT were conducted using a McDonnell Douglas F/A-18 Hornet aircraft model. Tile sensitivity of thrust loading, wing loading, and thrust vectoring on agility criteria were investigated. The module can compare the agility potential between different configurations and has capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements in the preliminary design.

  11. Agile manufacturing: The factory of the future

    NASA Technical Reports Server (NTRS)

    Loibl, Joseph M.; Bossieux, Terry A.

    1994-01-01

    The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

  12. Implementing Kanban for agile process management within the ALMA Software Operations Group

    NASA Astrophysics Data System (ADS)

    Reveco, Johnny; Mora, Matias; Shen, Tzu-Chiang; Soto, Ruben; Sepulveda, Jorge; Ibsen, Jorge

    2014-07-01

    After the inauguration of the Atacama Large Millimeter/submillimeter Array (ALMA), the Software Operations Group in Chile has refocused its objectives to: (1) providing software support to tasks related to System Integration, Scientific Commissioning and Verification, as well as Early Science observations; (2) testing the remaining software features, still under development by the Integrated Computing Team across the world; and (3) designing and developing processes to optimize and increase the level of automation of operational tasks. Due to their different stakeholders, each of these tasks presents a wide diversity of importances, lifespans and complexities. Aiming to provide the proper priority and traceability for every task without stressing our engineers, we introduced the Kanban methodology in our processes in order to balance the demand on the team against the throughput of the delivered work. The aim of this paper is to share experiences gained during the implementation of Kanban in our processes, describing the difficulties we have found, solutions and adaptations that led us to our current but still evolving implementation, which has greatly improved our throughput, prioritization and problem traceability.

  13. Compact, Automated, Frequency-Agile Microspectrofluorimeter

    NASA Technical Reports Server (NTRS)

    Fernandez, Salvador M.; Guignon, Ernest F.

    1995-01-01

    Compact, reliable, rugged, automated cell-culture and frequency-agile microspectrofluorimetric apparatus developed to perform experiments involving photometric imaging observations of single live cells. In original application, apparatus operates mostly unattended aboard spacecraft; potential terrestrial applications include automated or semiautomated diagnosis of pathological tissues in clinical laboratories, biomedical instrumentation, monitoring of biological process streams, and portable instrumentation for testing biological conditions in various environments. Offers obvious advantages over present laboratory instrumentation.

  14. AGILE Data Center and AGILE science highlights

    NASA Astrophysics Data System (ADS)

    Pittori, C.

    2013-06-01

    AGILE is a scientific mission of the Italian Space Agency (ASI) with INFN, INAF e CIFS participation, devoted to gamma-ray astrophysics. The satellite is in orbit since April 23rd, 2007. Gamma-ray astrophysics above 100 MeV is an exciting field of astronomical sciences that has received a strong impulse in recent years. Despite the small size and budget, AGILE produced several important scientific results, among which the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula. This discovery won to the AGILE PI and the AGILE Team the prestigious Bruno Rossi Prize for 2012, an international recognition in the field of high energy astrophysics. We present here the AGILE data center main activities, and we give an overview of the AGILE scientific highlights after 5 years of operations.

  15. Onshore and Offshore Outsourcing with Agility: Lessons Learned

    NASA Astrophysics Data System (ADS)

    Kussmaul, Clifton

    This chapter reflects on case study based an agile distributed project that ran for approximately three years (from spring 2003 to spring 2006). The project involved (a) a customer organization with key personnel distributed across the US, developing an application with rapidly changing requirements; (b) onshore consultants with expertise in project management, development processes, offshoring, and relevant technologies; and (c) an external offsite development team in a CMM-5 organization in southern India. This chapter is based on surveys and discussions with multiple participants. The several years since the project was completed allow greater perspective on both the strengths and weaknesses, since the participants can reflect on the entire life of the project, and compare it to subsequent experiences. Our findings emphasize the potential for agile project management in distributed software development, and the importance of people and interactions, taking many small steps to find and correct errors, and matching the structures of the project and product to support implementation of agility.

  16. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  17. Assessment of proposed fighter agility metrics

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.; Downing, David R.

    1990-01-01

    This paper presents the results of an analysis of proposed metrics to assess fighter aircraft agility. A novel framework for classifying these metrics is developed and applied. A set of transient metrics intended to quantify the axial and pitch agility of fighter aircraft is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction method are proposed, and sensitivities to pilot introduced errors during flight testing is investigated. Results indicate that the power onset and power loss parameters are promising candidates for quantifying axial agility, while maximum pitch up and pitch down rates are for quantifying pitch agility.

  18. An Agile Course-Delivery Approach

    ERIC Educational Resources Information Center

    Capellan, Mirkeya

    2009-01-01

    In the world of software development, agile methodologies have gained popularity thanks to their lightweight methodologies and flexible approach. Many advocates believe that agile methodologies can provide significant benefits if applied in the educational environment as a teaching method. The need for an approach that engages and motivates…

  19. Frequency agile relativistic magnetrons

    SciTech Connect

    Levine, J.S.; Harteneck, B.D.; Price, H.D.

    1995-11-01

    The authors are developing a family of frequency agile relativistic magnetrons to continuously cover the bands from 1 to 3 GHz. They have achieved tuning ranges of > 33%. The magnetrons have been operated repetitively in burst mode at rates up to 100 pps for 10 sec. Power is extracted from two resonators, and is in the range of 400--600 MW, fairly flat across the tuning bandwidth. They are using a network of phase shifters and 3-dB hybrids to combine the power into a single arm and to provide a continuously adjustable attenuator.

  20. Transitioning from Distributed and Traditional to Distributed and Agile: An Experience Report

    NASA Astrophysics Data System (ADS)

    Wildt, Daniel; Prikladnicki, Rafael

    Global companies that experienced extensive waterfall phased plans are trying to improve their existing processes to expedite team engagement. Agile methodologies have become an acceptable path to follow because it comprises project management as part of its practices. Agile practices have been used with the objective of simplifying project control through simple processes, easy to update documentation and higher team iteration over exhaustive documentation, focusing rather on team continuous improvement and aiming to add value to business processes. The purpose of this chapter is to describe the experience of a global multinational company on transitioning from distributed and traditional to distributed and agile. This company has development centers across North America, South America and Asia. This chapter covers challenges faced by the project teams of two pilot projects, including strengths of using agile practices in a globally distributed environment and practical recommendations for similar endeavors.

  1. Agile manufacturing from a statistical perspective

    SciTech Connect

    Easterling, R.G.

    1995-10-01

    The objective of agile manufacturing is to provide the ability to quickly realize high-quality, highly-customized, in-demand products at a cost commensurate with mass production. More broadly, agility in manufacturing, or any other endeavor, is defined as change-proficiency; the ability to thrive in an environment of unpredictable change. This report discusses the general direction of the agile manufacturing initiative, including research programs at the National Institute of Standards and Technology (NIST), the Department of Energy, and other government agencies, but focuses on agile manufacturing from a statistical perspective. The role of statistics can be important because agile manufacturing requires the collection and communication of process characterization and capability information, much of which will be data-based. The statistical community should initiate collaborative work in this important area.

  2. Fighter agility metrics, research, and test

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.

    1990-01-01

    Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

  3. Use of piloted simulation for high-angle-of-attack agility research and design criteria development

    NASA Technical Reports Server (NTRS)

    Ogburn, Marilyn E.; Foster, John V.; Hoffler, Keith D.

    1991-01-01

    The application of piloted simulations in the development of advanced fighter aircraft is reviewed in the context of the NASA High-Angle-of-Attack Technology Program (HATP). The HATP combines wind-tunnel experiments, computational aerodynamics, piloted simulations, and flight tests on a modified F-18 testbed aircraft and utilizes the experience and facilities of several NASA centers. Consideration is given to the role of simulation in the overall research process, simulation capabilities and software requirements, simulation flexibility and fidelity, evaluation maneuvers, the role of simulator pilots in evaluations, the analysis of simulation results, flight validation of maneuvers and rating approaches, and the use of simulations to define design criteria. Extensive diagrams, graphs, and flow charts are included.

  4. Current State of Agile User-Centered Design: A Survey

    NASA Astrophysics Data System (ADS)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  5. Agent-based scheduling system to achieve agility

    NASA Astrophysics Data System (ADS)

    Akbulut, Muhtar B.; Kamarthi, Sagar V.

    2000-12-01

    Today's competitive enterprises need to design, develop, and manufacture their products rapidly and inexpensively. Agile manufacturing has emerged as a new paradigm to meet these challenges. Agility requires, among many other things, scheduling and control software systems that are flexible, robust, and adaptive. In this paper a new agent-based scheduling system (ABBS) is developed to meet the challenges of an agile manufacturing system. In ABSS, unlike in the traditional approaches, information and decision making capabilities are distributed among the system entities called agents. In contrast with the most agent-based scheduling systems which commonly use a bidding approach, the ABBS employs a global performance monitoring strategy. A production-rate-based global performance metric which effectively assesses the system performance is developed to assist the agents' decision making process. To test the architecture, an agent-based discrete event simulation software is developed. The experiments performed using the simulation software yielded encouraging results in supporting the applicability of agent-based systems to address the scheduling and control needs of an agile manufacturing system.

  6. AGILE integration into APC for high mix logic fab

    NASA Astrophysics Data System (ADS)

    Gatefait, M.; Lam, A.; Le Gratiet, B.; Mikolajczak, M.; Morin, V.; Chojnowski, N.; Kocsis, Z.; Smith, I.; Decaunes, J.; Ostrovsky, A.; Monget, C.

    2015-09-01

    mix logic Fab) in term of product and technology portfolio AGILE corrects for up to 120nm of product topography error on process layer with less than 50nm depth of focus Based on tool functionalities delivered by ASML and on high volume manufacturing requirement, AGILE integration is a real challenge. Regarding ST requirements "Automatic AGILE" functionality developed by ASML was not a turnkey solution and a dedicated functionality was needed. A "ST homemade AGILE integration" has been fully developed and implemented within ASML and ST constraints. This paper describes this integration in our Advanced Process Control platform (APC).

  7. Towards a Better Understanding of CMMI and Agile Integration - Multiple Case Study of Four Companies

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna

    The amount of software is increasing in the different domains in Europe. This provides the industries in smaller countries good opportunities to work in the international markets. Success in the global markets however demands the rapid production of high quality, error free software. Both CMMI and agile methods seem to provide a ready solution for quality and lead time improvements. There is not, however, much empirical evidence available either about 1) how the integration of these two aspects can be done in practice or 2) what it actually demands from assessors and software process improvement groups. The goal of this paper is to increase the understanding of CMMI and agile integration, in particular, focusing on the research question: how to use ‘lightweight’ style of CMMI assessments in agile contexts. This is done via four case studies in which assessments were conducted using the goals of CMMI integrated project management and collaboration and coordination with relevant stakeholder process areas and practices from XP and Scrum. The study shows that the use of agile practices may support the fulfilment of the goals of CMMI process areas but there are still many challenges for the agile teams to be solved within the continuous improvement programs. It also identifies practical advices to the assessors and improvement groups to take into consideration when conducting assessment in the context of agile software development.

  8. Agile automated vision

    NASA Astrophysics Data System (ADS)

    Fandrich, Juergen; Schmitt, Lorenz A.

    1994-11-01

    The microelectronic industry is a protagonist in driving automated vision to new paradigms. Today semiconductor manufacturers use vision systems quite frequently in their fabs in the front-end process. In fact, the process depends on reliable image processing systems. In the back-end process, where ICs are assembled and packaged, today vision systems are only partly used. But in the next years automated vision will become compulsory for the back-end process as well. Vision will be fully integrated into every IC package production machine to increase yields and reduce costs. Modem high-speed material processing requires dedicated and efficient concepts in image processing. But the integration of various equipment in a production plant leads to unifying handling of data flow and interfaces. Only agile vision systems can act with these contradictions: fast, reliable, adaptable, scalable and comprehensive. A powerful hardware platform is a unneglectable requirement for the use of advanced and reliable, but unfortunately computing intensive image processing algorithms. The massively parallel SIMD hardware product LANTERN/VME supplies a powerful platform for existing and new functionality. LANTERN/VME is used with a new optical sensor for IC package lead inspection. This is done in 3D, including horizontal and coplanarity inspection. The appropriate software is designed for lead inspection, alignment and control tasks in IC package production and handling equipment, like Trim&Form, Tape&Reel and Pick&Place machines.

  9. Customer Communication Challenges and Solutions in Globally Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Korkala, Mikko

    Working in the globally distributed market is one of the key trends among the software organizations all over the world. [1-5]. Several factors have contributed to the growth of distributed software development; time-zone independent ”follow the sun” development, access to well-educated labour, maturation of the technical infrastructure and reduced costs are some of the most commonly cited benefits of distributed development [3, 6-8]. Furthermore, customers are often located in different countries because of the companies’ internationalization purposes or good market opportunities.

  10. Design, implementation and validation of a novel open framework for agile development of mobile health applications

    PubMed Central

    2015-01-01

    The delivery of healthcare services has experienced tremendous changes during the last years. Mobile health or mHealth is a key engine of advance in the forefront of this revolution. Although there exists a growing development of mobile health applications, there is a lack of tools specifically devised for their implementation. This work presents mHealthDroid, an open source Android implementation of a mHealth Framework designed to facilitate the rapid and easy development of mHealth and biomedical apps. The framework is particularly planned to leverage the potential of mobile devices such as smartphones or tablets, wearable sensors and portable biomedical systems. These devices are increasingly used for the monitoring and delivery of personal health care and wellbeing. The framework implements several functionalities to support resource and communication abstraction, biomedical data acquisition, health knowledge extraction, persistent data storage, adaptive visualization, system management and value-added services such as intelligent alerts, recommendations and guidelines. An exemplary application is also presented along this work to demonstrate the potential of mHealthDroid. This app is used to investigate on the analysis of human behavior, which is considered to be one of the most prominent areas in mHealth. An accurate activity recognition model is developed and successfully validated in both offline and online conditions. PMID:26329639

  11. Design, implementation and validation of a novel open framework for agile development of mobile health applications.

    PubMed

    Banos, Oresti; Villalonga, Claudia; Garcia, Rafael; Saez, Alejandro; Damas, Miguel; Holgado-Terriza, Juan A; Lee, Sungyong; Pomares, Hector; Rojas, Ignacio

    2015-01-01

    The delivery of healthcare services has experienced tremendous changes during the last years. Mobile health or mHealth is a key engine of advance in the forefront of this revolution. Although there exists a growing development of mobile health applications, there is a lack of tools specifically devised for their implementation. This work presents mHealthDroid, an open source Android implementation of a mHealth Framework designed to facilitate the rapid and easy development of mHealth and biomedical apps. The framework is particularly planned to leverage the potential of mobile devices such as smartphones or tablets, wearable sensors and portable biomedical systems. These devices are increasingly used for the monitoring and delivery of personal health care and wellbeing. The framework implements several functionalities to support resource and communication abstraction, biomedical data acquisition, health knowledge extraction, persistent data storage, adaptive visualization, system management and value-added services such as intelligent alerts, recommendations and guidelines. An exemplary application is also presented along this work to demonstrate the potential of mHealthDroid. This app is used to investigate on the analysis of human behavior, which is considered to be one of the most prominent areas in mHealth. An accurate activity recognition model is developed and successfully validated in both offline and online conditions. PMID:26329639

  12. Development of Robust, Light-weight, Agile Deformable Mirrors in Carbon Fiber

    NASA Astrophysics Data System (ADS)

    Hart, M.; Ammons, S. M.; Coughenour, B.; Richardson, L.,; Romeo, R.; Martin, R.

    2012-09-01

    Carbon fiber reinforced polymer (CFRP) has recently been developed to the point that surfaces of high optical quality can be routinely replicated. Building on this advance, we are developing a new generation of deformable mirrors (DMs) for adaptive optics application that extends long-standing expertise at the University of Arizona in large, optically powered DMs for astronomy. Our existing mirrors, up to 90 cm in diameter and with aspheric deformable facesheets, are deployed on a number of large astronomical telescopes. With actuator stroke of up to 50 microns and no hysteresis, they are delivering the best imaging ever seen from an astronomical AO system. Their Zerodur glass ceramic facesheets though are not well suited to non-astronomical applications. In this paper, we describe developmental work to replace the glass components of the DMs with CFRP, an attractive material for optics fabrication because of its high stiffness-to-weight ratio, strength, and very low coefficient of thermal expansion. Surface roughness arising from fiber print-through in the CFRP facesheets is low, < 3 nm PTV across a range of temperature, and the optical figure after correction of static terms by the DM actuators is on the order of 20 nm rms. After initial investment in an optical quality mandrel, replication costs of identical units in CFRP are very low, making the technology ideal for rapid mass production.

  13. Network configuration management : paving the way to network agility.

    SciTech Connect

    Maestas, Joseph H.

    2007-08-01

    Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, and customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.

  14. Agile manufacturing and constraints management: a strategic perspective

    NASA Astrophysics Data System (ADS)

    Stratton, Roy; Yusuf, Yahaya Y.

    2000-10-01

    The definition of the agile paradigm has proved elusive and is often viewed as a panacea, in contention with more traditional approaches to operations strategy development and Larkin its own methodology and tools. The Theory of Constraints (TOC) is also poorly understood, as it is commonly solely associated with production planning and control systems and bottleneck management. This paper will demonstrate the synergy between these two approaches together with the Theory of Inventive Problem Solving (TRIZ), and establish how the systematic elimination of trade-offs can support the agile paradigm. Whereas agility is often seen as a trade-off free destination, both TOC and TRIZ may be considered to be route finders, as they comprise methodologies that focus on the identification and elimination of the trade-offs that constrain the purposeful improvement of a system, be it organizational or mechanical. This paper will also show how the TOC thinking process may be combined with the TRIZ knowledge based approach and used in breaking contradictions within agile logistics.

  15. Development and testing of a frequency-agile optical parametric oscillator system for differential absorption lidar

    NASA Astrophysics Data System (ADS)

    Weibring, P.; Smith, J. N.; Edner, H.; Svanberg, S.

    2003-10-01

    An all-solid-state fast-tuning lidar transmitter for range- and temporally resolved atmospheric gas concentration measurements has been developed and thoroughly tested. The instrument is based on a commercial optical parametric oscillator (OPO) laser system, which has been redesigned with piezoelectric transducers mounted on the wavelength-tuning mirror and on the crystal angle tuning element in the OPO. Piezoelectric transducers similarly control a frequency-mixing stage and doubling stage, which have been incorporated to extend system capabilities to the mid-IR and UV regions. The construction allows the system to be tuned to any wavelength, in any order, in the range of the piezoelectric transducers on a shot-to-shot basis. This extends the measurement capabilities far beyond the two-wavelength differential absorption lidar method and enables simultaneous measurements of several gases. The system performance in terms of wavelength, linewidth, and power stability is monitored in real time by an étalon-based wave meter and gas cells. The tests showed that the system was able to produce radiation in the 220-4300-nm-wavelength region, with an average linewidth better than 0.2 cm-1 and a shot-to-shot tunability up to 160 cm-1 within 20 ms. The utility of real-time linewidth and wavelength measurements is demonstrated by the ability to identify occasional poor quality laser shots and disregard these measurements. Also, absorption cell measurements of methane and mercury demonstrate the performance in obtaining stable wavelength and linewidth during rapid scans in the mid-IR and UV regions.

  16. Integrating a distributed, agile, virtual enterprise in the TEAM program

    NASA Astrophysics Data System (ADS)

    Cobb, C. K.; Gray, W. Harvey; Hewgley, Robert E.; Klages, Edward J.; Neal, Richard E.

    1997-01-01

    The technologies enabling agile manufacturing (TEAM) program enhances industrial capability by advancing and deploying manufacturing technologies that promote agility. TEAM has developed a product realization process that features the integration of product design and manufacturing groups. TEAM uses the tools it collects, develops, and integrates in support of the product realization process to demonstrate and deploy agile manufacturing capabilities for three high- priority processes identified by industry: material removal, forming, and electromechanical assembly. In order to provide a proof-of-principle, the material removal process has been addressed first and has been successfully demonstrate din an 'interconnected' mode. An internet-accessible intersite file manager (IFM) application has been deployed to allow geographically distributed TEAM participants to share and distribute information as the product realization process is executed. An automated inspection planning application has been demonstrated, importing a solid model form the IFM, generating an inspection plan and a part program to be used in the inspection process, and then distributing the part program to the inspection site via the IFM. TEAM seeks to demonstrate the material removal process in an integrated mode in June 1997 complete with an object-oriented framework and infrastructure. The current status and future plans for this project are presented here.

  17. Preparing your Offshore Organization for Agility: Experiences in India

    NASA Astrophysics Data System (ADS)

    Srinivasan, Jayakanth

    Two strategies that have significantly changed the way we conventionally think about managing software development and sustainment are the family of development approaches collectively referred to as agile methods, and the distribution of development efforts on a global scale. When you combine the two strategies, organizations have to address not only the technical challenges that arise from introducing new ways of working, but more importantly have to manage the 'soft' factors that if ignored lead to hard challenges. Using two case studies of distributed agile software development in India we illustrate the areas that organizations need to be aware of when transitioning work to India. The key issues that we emphasize are the need to recruit and retain personnel; the importance of teaching, mentoring and coaching; the need to manage customer expectations; the criticality of well-articulated senior leadership vision and commitment; and the reality of operating in a heterogeneous process environment.

  18. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  19. An Agile Constructionist Mentoring Methodology for Software Projects in the High School

    ERIC Educational Resources Information Center

    Meerbaum-Salant, Orni; Hazzan, Orit

    2010-01-01

    This article describes the construction process and evaluation of the Agile Constructionist Mentoring Methodology (ACMM), a mentoring method for guiding software development projects in the high school. The need for such a methodology has arisen due to the complexity of mentoring software project development in the high school. We introduce the…

  20. Drug Development Process

    MedlinePlus

    ... Approvals The Drug Development Process The Drug Development Process Share Tweet Linkedin Pin it More sharing options ... public. More Information More in The Drug Development Process Step 1: Discovery and Development Step 2: Preclinical ...

  1. Agile robotic edge finishing system research

    SciTech Connect

    Powell, M.A.

    1995-07-01

    This paper describes a new project undertaken by Sandia National Laboratories to develop an agile, automated, high-precision edge finishing system. The project has a two-year duration and was initiated in October, 1994. This project involves re-designing and adding additional capabilities to an existing finishing workcell at Sandia; and developing intelligent methods for automating process definition and for controlling finishing processes. The resulting system will serve as a prototype for systems that will be deployed into highly flexible automated production lines. The production systems will be used to produce a wide variety of products with limited production quantities and quick turnaround requirements. The prototype system is designed to allow programming, process definition, fixture re-configuration, and process verification to be performed off-line for new products. CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) models of the part will be used to assist with the automated process development and process control tasks. To achieve Sandia`s performance goals, the system will be employ advanced path planning, burr prediction expert systems, automated process definition, statistical process models in a process database, and a two-level control scheme using hybrid position-force control and fuzzy logic control. In this paper, we discuss the progress and the planned system development under this project.

  2. Agile manufacturing in Intelligence, Surveillance and Reconnaissance (ISR)

    NASA Astrophysics Data System (ADS)

    DiPadua, Mark; Dalton, George

    2016-05-01

    The objective of the Agile Manufacturing for Intelligence, Surveillance, and Reconnaissance (AMISR) effort is to research, develop, design and build a prototype multi-intelligence (multi-INT), reconfigurable pod demonstrating benefits of agile manufacturing and a modular open systems approach (MOSA) to make podded intelligence, surveillance, and reconnaissance (ISR) capability more affordable and operationally flexible.

  3. Analysis and optimization of preliminary aircraft configurations in relationship to emerging agility metrics

    NASA Technical Reports Server (NTRS)

    Sandlin, Doral R.; Bauer, Brent Alan

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition one study illustrates the module's ability to optimize a configuration's agility performance.

  4. Fighter agility metrics. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.

    1990-01-01

    Fighter flying qualities and combat capabilities are currently measured and compared in terms relating to vehicle energy, angular rates and sustained acceleration. Criteria based on these measurable quantities have evolved over the past several decades and are routinely used to design aircraft structures, aerodynamics, propulsion and control systems. While these criteria, or metrics, have the advantage of being well understood, easily verified and repeatable during test, they tend to measure the steady state capability of the aircraft and not its ability to transition quickly from one state to another. Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A complete set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available.

  5. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that ``competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.`` Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  6. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.'' Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  7. Agile manufacturing prototyping system (AMPS)

    SciTech Connect

    Garcia, P.

    1998-05-09

    The Agile Manufacturing Prototyping System (AMPS) is being integrated at Sandia National Laboratories. AMPS consists of state of the industry flexible manufacturing hardware and software enhanced with Sandia advancements in sensor and model based control; automated programming, assembly and task planning; flexible fixturing; and automated reconfiguration technology. AMPS is focused on the agile production of complex electromechanical parts. It currently includes 7 robots (4 Adept One, 2 Adept 505, 1 Staubli RX90), conveyance equipment, and a collection of process equipment to form a flexible production line capable of assembling a wide range of electromechanical products. This system became operational in September 1995. Additional smart manufacturing processes will be integrated in the future. An automated spray cleaning workcell capable of handling alcohol and similar solvents was added in 1996 as well as parts cleaning and encapsulation equipment, automated deburring, and automated vision inspection stations. Plans for 1997 and out years include adding manufacturing processes for the rapid prototyping of electronic components such as soldering, paste dispensing and pick-and-place hardware.

  8. Production planning tools and techniques for agile manufacturing

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Turnquist, M.A.

    1996-10-01

    Effective use of resources shared among multiple products or processes is critical for agile manufacturing. This paper describes development and implementation of a computerized model to support production planning in a complex manufacturing system at Pantex Plant. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints, and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

  9. Agile parallel bioinformatics workflow management using Pwrake

    PubMed Central

    2011-01-01

    Background In bioinformatics projects, scientific workflow systems are widely used to manage computational procedures. Full-featured workflow systems have been proposed to fulfil the demand for workflow management. However, such systems tend to be over-weighted for actual bioinformatics practices. We realize that quick deployment of cutting-edge software implementing advanced algorithms and data formats, and continuous adaptation to changes in computational resources and the environment are often prioritized in scientific workflow management. These features have a greater affinity with the agile software development method through iterative development phases after trial and error. Here, we show the application of a scientific workflow system Pwrake to bioinformatics workflows. Pwrake is a parallel workflow extension of Ruby's standard build tool Rake, the flexibility of which has been demonstrated in the astronomy domain. Therefore, we hypothesize that Pwrake also has advantages in actual bioinformatics workflows. Findings We implemented the Pwrake workflows to process next generation sequencing data using the Genomic Analysis Toolkit (GATK) and Dindel. GATK and Dindel workflows are typical examples of sequential and parallel workflows, respectively. We found that in practice, actual scientific workflow development iterates over two phases, the workflow definition phase and the parameter adjustment phase. We introduced separate workflow definitions to help focus on each of the two developmental phases, as well as helper methods to simplify the descriptions. This approach increased iterative development efficiency. Moreover, we implemented combined workflows to demonstrate modularity of the GATK and Dindel workflows. Conclusions Pwrake enables agile management of scientific workflows in the bioinformatics domain. The internal domain specific language design built on Ruby gives the flexibility of rakefiles for writing scientific workflows. Furthermore, readability

  10. An investigation of fighter aircraft agility

    NASA Technical Reports Server (NTRS)

    Valasek, John; Downing, David R.

    1993-01-01

    This report attempts to unify in a single document the results of a series of studies on fighter aircraft agility funded by the NASA Ames Research Center, Dryden Flight Research Facility and conducted at the University of Kansas Flight Research Laboratory during the period January 1989 through December 1993. New metrics proposed by pilots and the research community to assess fighter aircraft agility are collected and analyzed. The report develops a framework for understanding the context into which the various proposed fighter agility metrics fit in terms of application and testing. Since new metrics continue to be proposed, this report does not claim to contain every proposed fighter agility metric. Flight test procedures, test constraints, and related criteria are developed. Instrumentation required to quantify agility via flight test is considered, as is the sensitivity of the candidate metrics to deviations from nominal pilot command inputs, which is studied in detail. Instead of supplying specific, detailed conclusions about the relevance or utility of one candidate metric versus another, the authors have attempted to provide sufficient data and analyses for readers to formulate their own conclusions. Readers are therefore ultimately responsible for judging exactly which metrics are 'best' for their particular needs. Additionally, it is not the intent of the authors to suggest combat tactics or other actual operational uses of the results and data in this report. This has been left up to the user community. Twenty of the candidate agility metrics were selected for evaluation with high fidelity, nonlinear, non real-time flight simulation computer programs of the F-5A Freedom Fighter, F-16A Fighting Falcon, F-18A Hornet, and X-29A. The information and data presented on the 20 candidate metrics which were evaluated will assist interested readers in conducting their own extensive investigations. The report provides a definition and analysis of each metric; details

  11. Perspectives on Agile Coaching

    NASA Astrophysics Data System (ADS)

    Fraser, Steven; Lundh, Erik; Davies, Rachel; Eckstein, Jutta; Larsen, Diana; Vilkki, Kati

    There are many perspectives to agile coaching including: growing coaching expertise, selecting the appropriate coach for your context; and eva luating value. A coach is often an itinerant who may observe, mentor, negotiate, influence, lead, and/or architect everything from team organization to system architecture. With roots in diverse fields ranging from technology to sociology coaches have differing motivations and experience bases. This panel will bring together coaches to debate and discuss various perspectives on agile coaching. Some of the questions to be addressed will include: What are the skills required for effective coaching? What should be the expectations for teams or individu als being coached? Should coaches be: a corporate resource (internal team of consultants working with multiple internal teams); an integral part of a specific team; or external contractors? How should coaches exercise influence and au thority? How should management assess the value of a coaching engagement? Do you have what it takes to be a coach? - This panel will bring together sea soned agile coaches to offer their experience and advice on how to be the best you can be!

  12. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  13. Agile Infrastructure Monitoring

    NASA Astrophysics Data System (ADS)

    Andrade, P.; Ascenso, J.; Fedorko, I.; Fiorini, B.; Paladin, M.; Pigueiras, L.; Santos, M.

    2014-06-01

    At the present time, data centres are facing a massive rise in virtualisation and cloud computing. The Agile Infrastructure (AI) project is working to deliver new solutions to ease the management of CERN data centres. Part of the solution consists in a new "shared monitoring architecture" which collects and manages monitoring data from all data centre resources. In this article, we present the building blocks of this new monitoring architecture, the different open source technologies selected for each architecture layer, and how we are building a community around this common effort.

  14. Agile dry etching of compound semiconductors for science-based manufacturing using in-situ process control

    SciTech Connect

    ASHBY,CAROL I.; VAWTER,GREGORY A.; BREILAND,WILLIAM G.; BRUSKAS,LARRY A.; WOODWORTH,JOSEPH R.; HEBNER,GREGORY A.

    2000-02-01

    In-situ optical diagnostics and ion beam diagnostics for plasma-etch and reactive-ion-beam etch (RIBE) tools have been developed and implemented on etch tools in the Compound Semiconductor Research Laboratory (CSRL). The optical diagnostics provide real-time end-point detection during plasma etching of complex thin-film layered structures that require precision etching to stop on a particular layer in the structure. The Monoetch real-time display and analysis program developed with this LDRD displays raw and filtered reflectance signals that enable an etch system operator to stop an etch at the desired depth within the desired layer. The ion beam diagnostics developed with this LDRD will permit routine analysis of critical ion-beam profile characteristics that determine etch uniformity and reproducibility on the RIBE tool.

  15. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, Stephan P.

    1998-01-01

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy.

  16. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  17. Agile rediscovering values: Similarities to continuous improvement strategies

    NASA Astrophysics Data System (ADS)

    Díaz de Mera, P.; Arenas, J. M.; González, C.

    2012-04-01

    Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

  18. PDS4 - Some Principles for Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Algermissen, S.; Padams, J.

    2015-12-01

    PDS4, a research data management and curation system for NASA's Planetary Science Archive, was developed using principles that promote the characteristics of agile development. The result is an efficient system that produces better research data products while using less resources (time, effort, and money) and maximizes their usefulness for current and future scientists. The key principle is architectural. The PDS4 information architecture is developed and maintained independent of the infrastructure's process, application and technology architectures. The information architecture is based on an ontology-based information model developed to leverage best practices from standard reference models for digital archives, digital object registries, and metadata registries and capture domain knowledge from a panel of planetary science domain experts. The information model provides a sharable, stable, and formal set of information requirements for the system and is the primary source for information to configure most system components, including the product registry, search engine, validation and display tools, and production pipelines. Multi-level governance is also allowed for the effective management of the informational elements at the common, discipline, and project level. This presentation will describe the development principles, components, and uses of the information model and how an information model-driven architecture exhibits characteristics of agile curation including early delivery, evolutionary development, adaptive planning, continuous improvement, and rapid and flexible response to change.

  19. Aircraft agility maneuvers

    NASA Technical Reports Server (NTRS)

    Cliff, Eugene M.; Thompson, Brian G.

    1992-01-01

    A new dynamic model for aircraft motions is presented. This model can be viewed as intermediate between a point-mass model, in which the body attitude angles are control-like, and a rigid-body model, in which the body-attitude angles evolve according to Newton's Laws. Specifically, consideration is given to the case of symmetric flight, and a model is constructed in which the body roll-rate and the body pitch-rate are the controls. In terms of this body-rate model a minimum-time heading change maneuver is formulated. When the bounds on the body-rates are large the results are similar to the point-mass model in that the model can very quickly change the applied forces and produce an acceleration to turn the vehicle. With finite bounds on these rates, the forces change in a smooth way. This leads to a measurable effect of agility.

  20. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  1. Parallel optimization methods for agile manufacturing

    SciTech Connect

    Meza, J.C.; Moen, C.D.; Plantenga, T.D.; Spence, P.A.; Tong, C.H.; Hendrickson, B.A.; Leland, R.W.; Reese, G.M.

    1997-08-01

    The rapid and optimal design of new goods is essential for meeting national objectives in advanced manufacturing. Currently almost all manufacturing procedures involve the determination of some optimal design parameters. This process is iterative in nature and because it is usually done manually it can be expensive and time consuming. This report describes the results of an LDRD, the goal of which was to develop optimization algorithms and software tools that will enable automated design thereby allowing for agile manufacturing. Although the design processes vary across industries, many of the mathematical characteristics of the problems are the same, including large-scale, noisy, and non-differentiable functions with nonlinear constraints. This report describes the development of a common set of optimization tools using object-oriented programming techniques that can be applied to these types of problems. The authors give examples of several applications that are representative of design problems including an inverse scattering problem, a vibration isolation problem, a system identification problem for the correlation of finite element models with test data and the control of a chemical vapor deposition reactor furnace. Because the function evaluations are computationally expensive, they emphasize algorithms that can be adapted to parallel computers.

  2. Supply chain network design problem for a new market opportunity in an agile manufacturing system

    NASA Astrophysics Data System (ADS)

    Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza

    2012-08-01

    The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.

  3. Laser forming process development

    SciTech Connect

    Blake, R.J.

    1996-12-31

    This paper is a summary of the activities performed for the process development of laser thermal forming sheet metal parts in support of rapid prototyping. A 400 watt pulsed Nd:YAG laser and 50 watt desktop CO{sub 2} laser were used during initial process development. Several tool-assisted laser forming approaches were conceived during the development of the process, and simple fixtures for process development/understanding were used throughout all testing. Much of the actual forming was performed with the base material in an unfixtured state. CRES (304) was used for baseline development, but the effort was directed toward forming titanium (e.g., 6Al-4V, 15V-3Cr-3Sn-3Al). Several DOE (i.e., Design of Experiment) techniques were employed during development and a Neural Net Computer Model was conceived for process control. This program was a joint effort in cooperation with the American Welding Society under contract with the Defense Advanced Research Projects Agency (DARPA). A synopsis of the laser forming process development, future opportunities, and applications are presented.

  4. Elements of an Art - Agile Coaching

    NASA Astrophysics Data System (ADS)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  5. Investigation into the impact of agility on conceptual fighter design

    NASA Technical Reports Server (NTRS)

    Engelbeck, R. M.

    1995-01-01

    The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

  6. A review of the Technologies Enabling Agile Manufacturing program

    SciTech Connect

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  7. Architecture-Centric Methods and Agile Approaches

    NASA Astrophysics Data System (ADS)

    Babar, Muhammad Ali; Abrahamsson, Pekka

    Agile software development approaches have had significant impact on industrial software development practices. Despite becoming widely popular, there is an increasing perplexity about the role and importance of a system’s software architecture in agile approaches [1, 2]. Advocates of the vital role of architecture in achieving quality goals of large-scale-software-intensive-systems are skeptics of the scalability of any development approach that does not pay sufficient attention to architectural issues. However, the proponents of agile approaches usually perceive the upfront design and evaluation of architecture as being of less value to the customers of a system. According to them, for example, re-factoring can help fix most of the problems. Many experiences show that large-scale re-factoring often results in significant defects, which are very costly to address later in the development cycle. It is considered that re-factoring is worthwhile as long as the high-level design is good enough to limit the need for large-scale re-factoring [1, 3, 4].

  8. What Does an Agile Coach Do?

    NASA Astrophysics Data System (ADS)

    Davies, Rachel; Pullicino, James

    The surge in Agile adoption has created a demand for project managers rather than direct their teams. A sign of this trend is the ever-increasing number of people getting certified as scrum masters and agile leaders. Training courses that introduce agile practices are easy to find. But making the transition to coach is not as simple as understanding what agile practices are. Your challenge as an Agile Coach is to support your team in learning how to wield their new Agile tools in creating great software.

  9. Development of metallization process

    NASA Technical Reports Server (NTRS)

    Garcia, A., III

    1983-01-01

    A non lead frit paste is evaluated. A two step process is discussed where the bulk of the metallization is Mo/Sn but a small ohmic pad is silver. A new matrix of paste formulations is developed. A variety of tests are performed on paste samples to determine electrical, thermal and structural properties.

  10. Software ``Best'' Practices: Agile Deconstructed

    NASA Astrophysics Data System (ADS)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  11. Embedding Agile Practices within a Plan-Driven Hierarchical Project Life Cycle

    SciTech Connect

    Millard, W. David; Johnson, Daniel M.; Henderson, John M.; Lombardo, Nicholas J.; Bass, Robert B.; Smith, Jason E.

    2014-07-28

    Organizations use structured, plan-driven approaches to provide continuity, direction, and control to large, multi-year programs. Projects within these programs vary greatly in size, complexity, level of maturity, technical risk, and clarity of the development objectives. Organizations that perform exploratory research, evolutionary development, and other R&D activities can obtain the benefits of Agile practices without losing the benefits of their program’s overarching plan-driven structure. This paper describes application of Agile development methods on a large plan-driven sensor integration program. While the client employed plan-driven, requirements flow-down methodologies, tight project schedules and complex interfaces called for frequent end-to-end demonstrations to provide feedback during system development. The development process maintained the many benefits of plan-driven project execution with the rapid prototyping, integration, demonstration, and client feedback possible through Agile development methods. This paper also describes some of the tools and implementing mechanisms used to transition between and take advantage of each methodology, and presents lessons learned from the project management, system engineering, and developer’s perspectives.

  12. BIOGAS Process development

    SciTech Connect

    Ghosh, S.; Mensinger, M.C.; Sajjad, A.; Henry, M.P.

    1984-01-01

    The overall objective of the program is to demonstrate and commercialize the IGT two-phase BIOGAS Process for optimized methane production from, and simultaneous stabilization of, municipal solid waste (MSW). The specific objective of the current program is to conduct a laboratory-scale investigation of simple, cost-effective feed pretreatment techniques and selected digestion reactor designs to optimize methane production from MSW-sludge blends, and to select the best pretreatment and digestion conditions for testing during the subsequent program for process development unit (PDU) operation. A significant portion of the program efforts to date has been directed at evaluating and/or developing feeding, mixing and discharging systems for handling high concentration, large particle size RDF slurries for anaerobic digestion processes. The performance of such processes depends significantly on the operational success of these subsystems. The results of the subsystem testing have been implemented in the design and operation of the 10-L, 20-L, and 125-L digesters. These results will also be utilized to design the CSTR and the upflow digesters of a large two-phase system. Data collected during the initial phase of this research showed in general that methane production from RDF decreased as the loading rate was increased. Thermophilic digestion did not appear to be significantly better than mesophlic digestion. 9 figures, 3 tables.

  13. Piloted simulator assessments of agility

    NASA Technical Reports Server (NTRS)

    Schneider, Edward T.

    1990-01-01

    NASA has utilized piloted simulators for nearly two decades to study high-angle-of-attack flying qualities, agility, and air-to-air combat. These studies have included assessments of an F-16XL aircraft equipped with thrust vectoring, an assessment of the F-18 HARV maneuvering requirements to assist in thrust vectoring control system design, and an agility assessment of the F-18. The F-18 agility assessment was compared with in-flight testing. Open-loop maneuvers such as 180-deg rolls to measure roll rate showed favorable simulator/in-flight comparison. Closed-loop maneuvers such as rolls to 90 deg with precision stops or certain maximum longitudinal pitching maneuvers showed poorer performance due to reduced aggressiveness of pilot inputs in flight to remain within flight envelope limits.

  14. The AGILE Data Center at ASDC

    NASA Astrophysics Data System (ADS)

    Pittori, Carlotta; AGILE Collaboration

    2013-01-01

    AGILE is a Scientific Mission of the Italian Space Agency (ASI) with INFN, INAF and CIFS participation, devoted to gamma-ray astrophysics. The satellite has been in orbit since April 23rd, 2007. Thanks to its sky monitoring capability and fast ground segment alert system, AGILE produced several important scientific results, among which was the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula over daily timescales. This discovery won for the AGILE PI and the AGILE Team the Bruno Rossi Prize for 2012. The AGILE Data Center, located at ASDC, is in charge of all the scientific oriented activities related to the analysis and archiving of AGILE data. I will present the AGILE data center main activities, and I will give an overview of the AGILE scientific highlights after 5 years of operations.

  15. The AGILE Alert System for Gamma-Ray Transients

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Parmiggiani, N.; Fioretti, V.; Chen, A. W.; Vercellone, S.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Beneventano, D.; Argan, A.; Trois, A.; Scalise, E.; Longo, F.; Pellizzoni, A.; Pucella, G.; Colafrancesco, S.; Conforti, V.; Tempesta, P.; Cerone, M.; Sabatini, P.; Annoni, G.; Valentini, G.; Salotti, L.

    2014-01-01

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  16. The agile alert system for gamma-ray transients

    SciTech Connect

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Fioretti, V.; Chen, A. W.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Pellizzoni, A.; and others

    2014-01-20

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  17. The agile transversal filter - A flexible building block for ICNIA

    NASA Astrophysics Data System (ADS)

    Botha, D. G.; Smead, F. W.

    Integrated Communications, Navigation and Identification Avionics (ICNIA) is an advanced development program to demonstrate an integrated systems approach to the implementation of functions normally performed by a collection of independent black boxes. The system design partitions all CNI functions to optimize modular commonality within the ICNIA system. One function required in many parallel channels is the processing of signals with instantaneous bandwidths of 10 MHz or less. A specific implementation is the Narrow Band Agile Transversal Filter (NBATF), which can be implemented in state-of-the-art technology, can process signals with a variety of algorithms selectable under software control, and can be replicated within the system, as required, to perform the total set of functions. The NBATF constitutes a building block module within the ICNIA system.

  18. Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Lenhardt, W. C.; Parsons, M. A.; Benedict, K. K.

    2014-12-01

    The data life cycle has figured prominently in describing the context of digital scientific data stewardship and cyberinfractructure in support of science. There are many different versions of the data life cycle, but they all follow a similar basic pattern: plan, collect, ingest, asses, preserve, discover, and reuse. The process is often interpreted in a fairly linear fashion despite it being a cycle conceptually. More recently at GeoData 2014 and elsewhere, questions have been raised about the utility of the data life cycle as it is currently represented. We are proposing to the community a re-examination of the data life cycle using an agile lens. Our goal is not to deploy agile methods, but to use agile principles as a heuristic to think about how to incorporate data stewardship across the scientific process from proposal stage to research and beyond. We will present alternative conceptualizations of the data life cycle with a goal to solicit feedback and to develop a new model for conceiving and describing the overall data stewardship process. We seek to re-examine past assumptions and shed new light on the challenges and necessity of data stewardship. The ultimate goal is to support new science through enhanced data interoperability, usability, and preservation.

  19. Project-Method Fit: Exploring Factors That Influence Agile Method Use

    ERIC Educational Resources Information Center

    Young, Diana K.

    2013-01-01

    While the productivity and quality implications of agile software development methods (SDMs) have been demonstrated, research concerning the project contexts where their use is most appropriate has yielded less definitive results. Most experts agree that agile SDMs are not suited for all project contexts. Several project and team factors have been…

  20. SU-E-T-610: Comparison of Treatment Times Between the MLCi and Agility Multileaf Collimators

    SciTech Connect

    Ramsey, C; Bowling, J

    2014-06-01

    Purpose: The Agility is a new 160-leaf MLC developed by Elekta for use in their Infinity and Versa HD linacs. As compared to the MLCi, the Agility increased the maximum leaf speed from 2 cm/s to 3.5 cm/s, and the maximum primary collimator speed from 1.5 cm/s to 9.0 cm/s. The purpose of this study was to determine if the Agility MLC resulted in improved plan quality and/or shorter treatment times. Methods: An Elekta Infinity that was originally equipped with a 80 leaf MLCi was upgraded to an 160 leaf Agility. Treatment plan quality was evaluated using the Pinnacle planning system with SmartArc. Optimization was performed once for the MLCi and once for the Agility beam models using the same optimization parameters and the same number of iterations. Patient treatment times were measured for all IMRT, VMAT, and SBRT patients treated on the Infinity with the MLCi and Agility MLCs. Treatment times were extracted from the EMR and measured from when the patient first walked into the treatment room until exiting the treatment room. Results: 11,380 delivery times were measured for patients treated with the MLCi, and 1,827 measurements have been made for the Agility MLC. The average treatment times were 19.1 minutes for the MLCi and 20.8 minutes for the Agility. Using a t-test analysis, there was no difference between the two groups (t = 0.22). The dose differences between patients planned with the MLCi and the Agility MLC were minimal. For example, the dose difference for the PTV, GTV, and cord for a head and neck patient planned using Pinnacle were effectively equivalent. However, the dose to the parotid glands was slightly worse with the Agility MLC. Conclusion: There was no statistical difference in treatment time, or any significant dosimetric difference between the Agility MLC and the MLCi.

  1. LIMB PROCESS DEVELOPMENT STUDIES

    EPA Science Inventory

    The report covers basic and applied studies concerned with three Limestone Injection Multistage Burner (LIMB) process objectives: (1) avoiding degradation of collection efficiency in the electrostatic precipitator (ESP) during LIMB, (2) achieving satisfactory sulfur dioxide (SO2)...

  2. Frequency-agile wireless sensor networks

    NASA Astrophysics Data System (ADS)

    Arms, Steven W.; Townsend, Christopher P.; Churchill, David L.; Hamel, Michael J.; Galbreath, Jacob H.; Mundell, Steven W.

    2004-07-01

    Our goal was to demonstrate a wireless communications system capable of simultaneous, high speed data communications from a variety of sensors. We have previously reported on the design and application of 2 KHz data logging transceiver nodes, however, only one node may stream data at a time, since all nodes on the network use the same communications frequency. To overcome these limitations, second generation data logging transceivers were developed with software programmable radio frequency (RF) communications. Each node contains on-board memory (2 Mbytes), sensor excitation, instrumentation amplifiers with programmable gains & offsets, multiplexer, 16 bit A/D converter, microcontroller, and frequency agile, bi-directional, frequency shift keyed (FSK) RF serial data link. These systems are capable of continuous data transmission from 26 distinct nodes (902-928 MHz band, 75 kbaud). The system was demonstrated in a compelling structural monitoring application. The National Parks Service requested a means for continual monitoring and recording of sensor data from the Liberty Bell during a move to a new location (Philadelphia, October 2003). Three distinct, frequency agile, wireless sensing nodes were used to detect visible crack shear/opening micromotions, triaxial accelerations, and hairline crack tip strains. The wireless sensors proved to be useful in protecting the Liberty Bell.

  3. The AGILE gamma-ray astronomy mission

    NASA Astrophysics Data System (ADS)

    Mereghetti, S.; Tavani, M.; Argan, A.; Barbiellini, G.; Caraveo, P.; Chen, A.; Cocco, V.; Costa, E.; Di Cocco, G.; Feroci, M.; Labanti, C.; Lapshov, I.; Lipari, P.; Longo, F.; Morselli, A.; Perotti, F.; Picozza, P.; Pittori, C.; Prest, M.; Rubini, A.; Soffitta, P.; Vallazza, E.; Vercellone, S.; Zanello, D.

    2001-09-01

    We describe the AGILE satellite: a unique tool for high-energy astrophysics in the 30 MeV - 50 GeV range before GLAST. The scientific performances of AGILE are comparable to those of EGRET, despite the much smaller weight and dimensions. The AGILE mission will be optimized for the imaging capabilities above 30 MeV and for the study of transient phenomena, complemented by simultaneous monitoring in the hard X-ray band (10 - 40 keV).

  4. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Skutch, M. E.; Driggers, J. M.; Hopkins, R. H.

    1981-01-01

    The silicon web process takes advantage of natural crystallographic stabilizing forces to grow long, thin single crystal ribbons directly from liquid silicon. The ribbon, or web, is formed by the solidification of a liquid film supported by surface tension between two silicon filaments, called dendrites, which border the edges of the growing strip. The ribbon can be propagated indefinitely by replenishing the liquid silicon as it is transformed to crystal. The dendritic web process has several advantages for achieving low cost, high efficiency solar cells. These advantages are discussed.

  5. Agile hardware and software systems engineering for critical military space applications

    NASA Astrophysics Data System (ADS)

    Huang, Philip M.; Knuth, Andrew A.; Krueger, Robert O.; Garrison-Darrin, Margaret A.

    2012-06-01

    The Multi Mission Bus Demonstrator (MBD) is a successful demonstration of agile program management and system engineering in a high risk technology application where utilizing and implementing new, untraditional development strategies were necessary. MBD produced two fully functioning spacecraft for a military/DOD application in a record breaking time frame and at dramatically reduced costs. This paper discloses the adaptation and application of concepts developed in agile software engineering to hardware product and system development for critical military applications. This challenging spacecraft did not use existing key technology (heritage hardware) and created a large paradigm shift from traditional spacecraft development. The insertion of new technologies and methods in space hardware has long been a problem due to long build times, the desire to use heritage hardware, and lack of effective process. The role of momentum in the innovative process can be exploited to tackle ongoing technology disruptions and allowing risk interactions to be mitigated in a disciplined manner. Examples of how these concepts were used during the MBD program will be delineated. Maintaining project momentum was essential to assess the constant non recurring technological challenges which needed to be retired rapidly from the engineering risk liens. Development never slowed due to tactical assessment of the hardware with the adoption of the SCRUM technique. We adapted this concept as a representation of mitigation of technical risk while allowing for design freeze later in the program's development cycle. By using Agile Systems Engineering and Management techniques which enabled decisive action, the product development momentum effectively was used to produce two novel space vehicles in a fraction of time with dramatically reduced cost.

  6. Chemical waterflood process development

    SciTech Connect

    Chang, H.L.

    1980-04-01

    A waterflood process is claimed wherein a slug of biopolymer is injected into a formation, followed by a slug of synthetic polymer. The biopolymer slug protects the synthetic polymer from degradation due to presence of salts or surfactants in the formation.

  7. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Blais, P. D.; Davis, J. R., Jr.

    1977-01-01

    Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities.

  8. Development of metallization process

    NASA Technical Reports Server (NTRS)

    Garcia, A., III

    1983-01-01

    Solar cells were produced using a Mo/Sn/TiH screen printed paste with a lead/borosilicate frit that are electrically comparable to control silver cells. The process is currently unsuccessful because the soldering of interconnects to these cells has proved difficult. Future work will investigate using CO instead of H2 as the reducing gas and putting an ITO coating on the cell prior to metallization.

  9. Development of metallization process

    NASA Astrophysics Data System (ADS)

    Garcia, A., III

    1983-04-01

    Solar cells were produced using a Mo/Sn/TiH screen printed paste with a lead/borosilicate frit that are electrically comparable to control silver cells. The process is currently unsuccessful because the soldering of interconnects to these cells has proved difficult. Future work will investigate using CO instead of H2 as the reducing gas and putting an ITO coating on the cell prior to metallization.

  10. Agile robotic edge finishing

    SciTech Connect

    Powell, M.

    1996-08-01

    Edge finishing processes have seemed like ideal candidates for automation. Most edge finishing processes are unpleasant, dangerous, tedious, expensive, not repeatable and labor intensive. Estimates place the cost of manual edge finishing processes at 12% of the total cost of fabricating precision parts. For small, high precision parts, the cost of hand finishing may be as high as 305 of the total part cost. Up to 50% of this cost could be saved through automation. This cost estimate includes the direct costs of edge finishing: the machining hours required and the 30% scrap and rework rate after manual finishing. Not included in these estimates are the indirect costs resulting from cumulative trauma disorders and retraining costs caused by the high turnover rate for finishing jobs.. Despite the apparent economic advantages, edge finishing has proven difficult to automate except in low precision and/or high volume production environments. Finishing automation systems have not been deployed successfully in Department of Energy defense programs (DOE/DP) production, A few systems have been attempted but have been subsequently abandoned for traditional edge finishing approaches: scraping, grinding, and filing the edges using modified dental tools and hand held power tools. Edge finishing automation has been an elusive but potentially lucrative production enhancement. The amount of time required for reconfiguring workcells for new parts, the time required to reprogram the workcells to finish new parts, and automation equipment to respond to fixturing errors and part tolerances are the most common reasons cited for eliminating automation as an option for DOE/DP edge finishing applications. Existing automated finishing systems have proven to be economically viable only where setup and reprogramming costs are a negligible fraction of overall production costs.

  11. On the Biomimetic Design of Agile-Robot Legs

    PubMed Central

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented. PMID:22247667

  12. Developments in Signature Process Control

    NASA Astrophysics Data System (ADS)

    Keller, L. B.; Dominski, Marty

    1993-01-01

    Developments in the adaptive process control technique known as Signature Process Control for Advanced Composites (SPCC) are described. This computer control method for autoclave processing of composites was used to develop an optimum cure cycle for AFR 700B polyamide and for an experimental poly-isoimide. An improved process cycle was developed for Avimid N polyamide. The potential for extending the SPCC technique to pre-preg quality control, press modeling, pultrusion and RTM is briefly discussed.

  13. Tailoring Agility: Promiscuous Pair Story Authoring and Value Calculation

    NASA Astrophysics Data System (ADS)

    Tendon, Steve

    This chapter describes how a multi-national software organization created a business plan involving business units from eight countries that followed an agile way, after two previously failed attempts with traditional approaches. The case is told by the consultant who initiated implementation of agility into requirements gathering, estimation and planning processes in an international setting. The agile approach was inspired by XP, but then tailored to meet the peculiar requirements. Two innovations were critical. The first innovation was promiscuous pair story authoring, where user stories were written by two people (similarly to pair programming), and the pairing changed very often (as frequently as every 15-20 minutes) to achieve promiscuity and cater for diverse point of views. The second innovation was an economic value evaluation (and not the cost) which was attributed to stories. Continuous recalculation of the financial value of the stories allowed to assess the projects financial return. In this case implementation of agility in the international context allowed the involved team members to reach consensus and unanimity of decisions, vision and purpose.

  14. Silicon Web Process Development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Hopkins, R. H.; Mchugh, J. P.; Hill, F. E.; Heimlich, M. E.; Driggers, J. M.

    1978-01-01

    Progress in the development of techniques to grow silicon web at 25 wq cm/min output rate is reported. Feasibility of web growth with simultaneous melt replenishment is discussed. Other factors covered include: (1) tests of aftertrimmers to improve web width; (2) evaluation of growth lid designs to raise speed and output rate; (3) tests of melt replenishment hardware; and (4) investigation of directed gas flow systems to control unwanted oxide deposition in the system and to improve convective cooling of the web. Compatibility with sufficient solar cell performance is emphasized.

  15. Multiply-agile encryption in high speed communication networks

    SciTech Connect

    Pierson, L.G.; Witzke, E.L.

    1997-05-01

    Different applications have different security requirements for data privacy, data integrity, and authentication. Encryption is one technique that addresses these requirements. Encryption hardware, designed for use in high-speed communications networks, can satisfy a wide variety of security requirements if that hardware is key-agile, robustness-agile and algorithm-agile. Hence, multiply-agile encryption provides enhanced solutions to the secrecy, interoperability and quality of service issues in high-speed networks. This paper defines these three types of agile encryption. Next, implementation issues are discussed. While single-algorithm, key-agile encryptors exist, robustness-agile and algorithm-agile encryptors are still research topics.

  16. Silicon web process development

    NASA Technical Reports Server (NTRS)

    Duncan, C. S.; Seidensticker, R. G.; Mchugh, J. P.; Hill, F. E.; Skutch, M. E.; Driggers, J. M.; Hopkins, R. H.

    1980-01-01

    A barrier crucible design which consistently maintains melt stability over long periods of time was successfully tested and used in long growth runs. The pellet feeder for melt replenishment was operated continuously for growth runs of up to 17 hours. The liquid level sensor comprising a laser/sensor system was operated, performed well, and meets the requirements for maintaining liquid level height during growth and melt replenishment. An automated feedback loop connecting the feed mechanism and the liquid level sensing system was designed and constructed and operated successfully for 3.5 hours demonstrating the feasibility of semi-automated dendritic web growth. The sensitivity of the cost of sheet, to variations in capital equipment cost and recycling dendrites was calculated and it was shown that these factors have relatively little impact on sheet cost. Dendrites from web which had gone all the way through the solar cell fabrication process, when melted and grown into web, produce crystals which show no degradation in cell efficiency. Material quality remains high and cells made from web grown at the start, during, and the end of a run from a replenished melt show comparable efficiencies.

  17. Signal processing development

    NASA Astrophysics Data System (ADS)

    Barrett, T. B.; Marshall, R.; Bloom, J.; Comer, C.; Caulfield, J.; Warde, C.; Salour, M.

    1989-11-01

    This electron microscope has been applied to the study of the growth of thin epitaxial films on silicon substrates. The study of the nature of platinum-silicide films formed by heating evaporated platinum films on these substrates is discussed. The use of ultra high vacuum systems together with a residual gas analyzer (RGA) is discussed as they relate to the preparation of silicides, a dielectric layer of silicon monoxide is evaporated and an ion beam implanter is used to form a special buried layer as a step toward silicon devices. Synthesis and single crystal growth of indium phosphide in a one-step in-situ process at high ambient pressures is discussed. Analysis of heat transfer by convection, conduction, and radiation in a closed pressure vessel is given. A set of source modules and NOS procedures have been prepared to permit easy access to a 3-dimensional, non-isotrophic ray-tracing program (the Jones - Stephenson program). This system is designed to be run on a CDC CYBER computer system or equivalent using the operating system.

  18. Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

    SciTech Connect

    Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

    1998-05-01

    Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

  19. Processes and process development in Japan

    NASA Technical Reports Server (NTRS)

    Noda, T.

    1986-01-01

    The commercialization of solar power generation necessitates the development of low cost manufacturing method of silicon suitable for solar cells. The manufacturing methods of semiconductor grade silicon (SEG-Si) and the development of solar grade silicon (SOG-Si) in foreign countries was investigated. It was concluded that the most efficient method of developing such materials was the hydrogen reduction process of trichlorosilane (TCS), using a fluidized bed reactor. The low cost reduction of polysilicon requires cost reductions of raw materials, energy, labor, and capital. These conditions were carefully reviewed. The overall conclusion was that a development program should be based on the TCS-FBR process and that the experimental program should be conducted in test facilities capable of producing 10 tons of silicon granules per year.

  20. The Introduction of Agility into Albania.

    ERIC Educational Resources Information Center

    Smith-Stevens, Eileen J.; Shkurti, Drita

    1998-01-01

    Describes a plan to introduce and achieve a national awareness of agility (and easy entry into the world market) for Albania through the relatively stable higher-education order. Agility's four strategic principles are enriching the customer, cooperating to enhance competitiveness, organizing to master change and uncertainty, and leveraging the…

  1. Wavelength-Agile External-Cavity Diode Laser for DWDM

    NASA Technical Reports Server (NTRS)

    Pilgrim, Jeffrey S.; Bomse, David S.

    2006-01-01

    A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

  2. Agile Data Management with the Global Change Information System

    NASA Astrophysics Data System (ADS)

    Duggan, B.; Aulenbach, S.; Tilmes, C.; Goldstein, J.

    2013-12-01

    We describe experiences applying agile software development techniques to the realm of data management during the development of the Global Change Information System (GCIS), a web service and API for authoritative global change information under development by the US Global Change Research Program. Some of the challenges during system design and implementation have been : (1) balancing the need for a rigorous mechanism for ensuring information quality with the realities of large data sets whose contents are often in flux, (2) utilizing existing data to inform decisions about the scope and nature of new data, and (3) continuously incorporating new knowledge and concepts into a relational data model. The workflow for managing the content of the system has much in common with the development of the system itself. We examine various aspects of agile software development and discuss whether or how we have been able to use them for data curation as well as software development.

  3. Agile: From Software to Mission System

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shirley, Mark H.; Hobart, Sarah Groves

    2016-01-01

    The Resource Prospector (RP) is an in-situ resource utilization (ISRU) technology demonstration mission, designed to search for volatiles at the Lunar South Pole. This is NASA's first near real time tele-operated rover on the Moon. The primary objective is to search for volatiles at one of the Lunar Poles. The combination of short mission duration, a solar powered rover, and the requirement to explore shadowed regions makes for an operationally challenging mission. To maximize efficiency and flexibility in Mission System design and thus to improve the performance and reliability of the resulting Mission System, we are tailoring Agile principles that we have used effectively in ground data system software development and applying those principles to the design of elements of the mission operations system.

  4. Agility and mixed-model furniture production

    NASA Astrophysics Data System (ADS)

    Yao, Andrew C.

    2000-10-01

    The manufacture of upholstered furniture provides an excellent opportunity to analyze the effect of a comprehensive communication system on classical production management functions. The objective of the research is to study the scheduling heuristics that embrace the concepts inherent in MRP, JIT and TQM while recognizing the need for agility in a somewhat complex and demanding environment. An on-line, real-time data capture system provides the status and location of production lots, components, subassemblies for schedule control. Current inventory status of raw material and purchased items are required in order to develop and adhere to schedules. For the large variety of styles and fabrics customers may order, the communication system must provide timely, accurate and comprehensive information for intelligent decisions with respect to the product mix and production resources.

  5. Agile data management for curation of genomes to watershed datasets

    NASA Astrophysics Data System (ADS)

    Varadharajan, C.; Agarwal, D.; Faybishenko, B.; Versteeg, R.

    2015-12-01

    A software platform is being developed for data management and assimilation [DMA] as part of the U.S. Department of Energy's Genomes to Watershed Sustainable Systems Science Focus Area 2.0. The DMA components and capabilities are driven by the project science priorities and the development is based on agile development techniques. The goal of the DMA software platform is to enable users to integrate and synthesize diverse and disparate field, laboratory, and simulation datasets, including geological, geochemical, geophysical, microbiological, hydrological, and meteorological data across a range of spatial and temporal scales. The DMA objectives are (a) developing an integrated interface to the datasets, (b) storing field monitoring data, laboratory analytical results of water and sediments samples collected into a database, (c) providing automated QA/QC analysis of data and (d) working with data providers to modify high-priority field and laboratory data collection and reporting procedures as needed. The first three objectives are driven by user needs, while the last objective is driven by data management needs. The project needs and priorities are reassessed regularly with the users. After each user session we identify development priorities to match the identified user priorities. For instance, data QA/QC and collection activities have focused on the data and products needed for on-going scientific analyses (e.g. water level and geochemistry). We have also developed, tested and released a broker and portal that integrates diverse datasets from two different databases used for curation of project data. The development of the user interface was based on a user-centered design process involving several user interviews and constant interaction with data providers. The initial version focuses on the most requested feature - i.e. finding the data needed for analyses through an intuitive interface. Once the data is found, the user can immediately plot and download data

  6. Requirement Changes and Project Success: The Moderating Effects of Agile Approaches in System Engineering Projects

    NASA Astrophysics Data System (ADS)

    Maierhofer, Sabine; Stelzmann, Ernst; Kohlbacher, Markus; Fellner, Björn

    This paper reports the findings of an empirical study on the influence agile development methods exert on the success of projects. The goal is to determine whether agile methods are able to mitigate negative effects requirement changes have on the performance of Systems Engineering projects, i.e. projects where systems consisting of hard- and software are developed. Agile methods have been proven to successfully support development projects in the field of traditional software engineering, but with an ever expending market of integrated systems manufacturers their usability for those complex projects has yet to be examined. This study focuses on 16 specific agile practices and their ability to improve the success of complex hard- and software projects.

  7. Developing the JPL Engineering Processes

    NASA Technical Reports Server (NTRS)

    Linick, Dave; Briggs, Clark

    2004-01-01

    This paper briefly recounts the recent history of process reengineering at the NASA Jet Propulsion Laboratory, with a focus on the engineering processes. The JPL process structure is described and the process development activities of the past several years outlined. The main focus of the paper is on the current process structure, the emphasis on the flight project life cycle, the governance approach that lead to Flight Project Practices, and the remaining effort to capture process knowledge at the detail level of the work group.

  8. I'll Txt U if I Have a Problem: How the Société Canadienne du Cancer in Quebec Applied Behavior-Change Theory, Data Mining and Agile Software Development to Help Young Adults Quit Smoking

    PubMed Central

    van Mierlo, Trevor; Fournier, Rachel; Jean-Charles, Anathalie; Hovington, Jacinthe; Ethier, Isabelle; Selby, Peter

    2014-01-01

    Introduction For many organizations, limited budgets and phased funding restrict the development of digital health tools. This problem is often exacerbated by the ever-increasing sophistication of technology and costs related to programming and maintenance. Traditional development methods tend to be costly and inflexible and not client centered. The purpose of this study is to analyze the use of Agile software development and outcomes of a three-phase mHealth program designed to help young adult Quebecers quit smoking. Methods In Phase I, literature reviews, focus groups, interviews, and behavior change theory were used in the adaption and re-launch of an existing evidence-based mHealth platform. Based on analysis of user comments and utilization data from Phase I, the second phase expanded the service to allow participants to live text-chat with counselors. Phase II evaluation led to the third and current phase, in which algorithms were introduced to target pregnant smokers, substance users, students, full-time workers, those affected by mood disorders and chronic disease. Results Data collected throughout the three phases indicate that the incremental evolution of the intervention has led to increasing numbers of smokers being enrolled while making functional enhancements. In Phase I (240 days) 182 smokers registered with the service. 51% (n = 94) were male and 61.5% (n = 112) were between the ages of 18–24. In Phase II (300 days), 994 smokers registered with the service. 51% (n = 508) were male and 41% (n = 403) were between the ages of 18–24. At 174 days to date 873 smokers have registered in the third phase. 44% (n = 388) were male and 24% (n = 212) were between the ages of 18–24. Conclusions Emerging technologies in behavioral science show potential, but do not have defined best practices for application development. In phased-based projects with limited funding, Agile appears to be a viable approach to building and expanding

  9. Social Protocols for Agile Virtual Teams

    NASA Astrophysics Data System (ADS)

    Picard, Willy

    Despite many works on collaborative networked organizations (CNOs), CSCW, groupware, workflow systems and social networks, computer support for virtual teams is still insufficient, especially support for agility, i.e. the capability of virtual team members to rapidly and cost efficiently adapt the way they interact to changes. In this paper, requirements for computer support for agile virtual teams are presented. Next, an extension of the concept of social protocol is proposed as a novel model supporting agile interactions within virtual teams. The extended concept of social protocol consists of an extended social network and a workflow model.

  10. Monolithic Fuel Fabrication Process Development

    SciTech Connect

    C. R. Clark; N. P. Hallinan; J. F. Jue; D. D. Keiser; J. M. Wight

    2006-05-01

    The pursuit of a high uranium density research reactor fuel plate has led to monolithic fuel, which possesses the greatest possible uranium density in the fuel region. Process developments in fabrication development include friction stir welding tool geometry and cooling improvements and a reduction in the length of time required to complete the transient liquid phase bonding process. Annealing effects on the microstructures of the U-10Mo foil and friction stir welded aluminum 6061 cladding are also examined.

  11. Agile manufacturing concepts and opportunities in ceramics

    SciTech Connect

    Booth, C.L.; Harmer, M.P.

    1995-08-01

    In 1991 Lehigh University facilitated seminars over a period of 8 months to define manufacturing needs for the 21st century. They concluded that the future will be characterized by rapid changes in technology advances, customer demands, and shifts in market dynamics and coined the term {open_quotes}Agile Manufacturing{close_quotes}. Agile manufacturing refers to the ability to thrive in an environment of constant unpredictable change. Market opportunities are attacked by partnering to form virtual firms to dynamically obtain the required skills for each product opportunity. This paper will describe and compare agile vs. traditional concepts of organization & structure, management policy and ethics, employee environment, product focus, information, and paradigm shift. Examples of agile manufacturing applied to ceramic materials will be presented.

  12. Agile Data Curation at a State Geological Survey

    NASA Astrophysics Data System (ADS)

    Hills, D. J.

    2015-12-01

    State agencies, including geological surveys, are often the gatekeepers for myriad data products essential for scientific research and economic development. For example, the Geological Survey of Alabama (GSA) is mandated to explore for, characterize, and report Alabama's mineral, energy, water, and biological resources in support of economic development, conservation, management, and public policy for the betterment of Alabama's citizens, communities, and businesses. As part of that mandate, the GSA has increasingly been called upon to make our data more accessible to stakeholders. Even as demand for greater data accessibility grows, budgets for such efforts are often small, meaning that agencies must do more for less. Agile software development has yielded efficient, effective products, most often at lower cost and in shorter time. Taking guidance from the agile software development model, the GSA is working towards more agile data management and curation. To date, the GSA's work has been focused primarily on data rescue. By using workflows that maximize clear communication while encouraging simplicity (e.g., maximizing the amount of work not done or that can be automated), the GSA is bringing decades of dark data into the light. Regular checks by the data rescuer with the data provider (or their proxy) provides quality control without adding an overt burden on either party. Moving forward, these workflows will also allow for more efficient and effective data management.

  13. ROADM architectures and technologies for agile optical networks

    NASA Astrophysics Data System (ADS)

    Eldada, Louay A.

    2007-02-01

    We review the different optoelectronic component and module technologies that have been developed for use in ROADM subsystems, and describe their principles of operation, designs, features, advantages, and challenges. We also describe the various needs for reconfigurable optical add/drop switching in agile optical networks. For each network need, we present the different ROADM subsystem architecture options with their pros and cons, and describe the optoelectronic technologies supporting each architecture.

  14. Agility Following the Application of Cold Therapy

    PubMed Central

    Evans, Todd A.; Ingersoll, Christopher; Knight, Kenneth L.; Worrell, Teddy

    1995-01-01

    Cold application is commonly used before strenuous exercise due to its hypalgesic effects. Some have questioned this procedure because of reports that cold may reduce isokinetic torque. However, there have been no investigations of actual physical performance following cold application. The purpose of this study was to determine if a 20-minute ice immersion treatment to the foot and ankle affected the performance of three agility tests: the carioca maneuver, the cocontraction test, and the shuttle run. Twenty-four male athletic subjects were tested during two different treatment sessions following an orientation session. Subjects were tested following a 20-minute 1°C ice immersion treatment to the dominant foot and ankle and 20 minutes of rest. Following each treatment, subjects performed three trials of each agility test, with 30 seconds rest between each trial, and 1 minute between each different agility test. The order in which each subject performed the agility tests was determined by a balanced Latin square. A MANOVA with repeated measures was used to determine if there was an overall significant difference in the agility times recorded between the cold and control treatments and if the order of the treatment sessions affected the scores. Although the mean agility time scores were slightly slower following the cold treatment, cooling the foot and ankle caused no difference in agility times. Also, there was no difference resulting from the treatment orders. We felt that the slightly slower scores may have been a result of tissue stiffness and/or subject's apprehension immediately following the cold treatment. Cold application to the foot and ankle can be used before strenuous exercise without altering agility. Imagesp232-a PMID:16558341

  15. Processes of Expressive Behavior Development.

    ERIC Educational Resources Information Center

    Zivin, Gail

    1986-01-01

    Seventeen processes in the development of expressive behavior are reviewed and coordinated in a framework that is shown to accommodate current perspectives on expressive behavior development. Works of Ekman, Izard, Lewis and Michalson, and Sroufe are briefly reviewed. Neglected areas of research are indicated and the course of expressive behavior…

  16. SuperAGILE Services at ASDC

    SciTech Connect

    Preger, B.; Verrecchia, F.; Pittori, C.; Antonelli, L. A.; Giommi, P.; Lazzarotto, F.; Evangelista, Y.

    2008-05-22

    The Italian Space Agency Science Data Center (ASDC) is a facility with several responsibilities including support to all the ASI scientific missions as for management and archival of the data, acting as the interface between ASI and the scientific community and providing on-line access to the data hosted. In this poster we describe the services that ASDC provides for SuperAGILE, in particular the ASDC public web pages devoted to the dissemination of SuperAGILE scientific results. SuperAGILE is the X-Ray imager onboard the AGILE mission, and provides the scientific community with orbit-by-orbit information on the observed sources. Crucial source information including position and flux in chosen energy bands will be reported in the SuperAGILE public web page at ASDC. Given their particular interest, another web page will be dedicated entirely to GRBs and other transients, where new event alerts will be notified and where users will find all the available informations on the GRBs detected by SuperAGILE.

  17. Automating the training development process

    NASA Technical Reports Server (NTRS)

    Scott, Carol J.

    1993-01-01

    The Automated Training Development System (ATDS) was developed as a training tool for the JPL training environment. ATDS is based on the standard for military training programs and is designed to develop training from a system perspective, focusing on components in terms of the whole process. The principal feature of ATDS is data base maintainability. Everything is contained and maintained within the data base, and, if properly developed, it could be a training component of a software delivery and provided to CM as a controlled item. The analysis, development, design, presentation, and reporting phases in the ATDS instructional design method are illustrated.

  18. Three `C's of Agile Practice: Collaboration, Co-ordination and Communication

    NASA Astrophysics Data System (ADS)

    Sharp, Helen; Robinson, Hugh

    The importance of collaboration, co-ordination and communication in agile teams is often discussed and rarely disputed. These activities are supported through various practices including pairing, customer collaboration, stand-ups and the planning game. However the mechanisms used to support these activities are sometimes more difficult to pin down. We have been studying agile teams for over a decade, and have found that story cards and the Wall are central to an agile team's activity, and the information they hold and convey is crucial for supporting the team's collaboration and co-ordination activity. However the information captured by these usually physical artefacts pertains mainly to progress rather than to functional dependencies. This latter information is fundamental to any software development, and in a non-agile environment is usually contained in detailed documentation not generally produced in an agile team. Instead, this information resides in their communication and social practices. In this chapter we discuss these three ‘C's of agile development and what we know about how they are supported through story cards and the Wall.

  19. Balancing Plan-Driven and Agile Methods in Software Engineering Project Courses

    NASA Astrophysics Data System (ADS)

    Boehm, Barry; Port, Dan; Winsor Brown, A.

    2002-09-01

    For the past 6 years, we have been teaching a two-semester software engineering project course. The students organize into 5-person teams and develop largely web-based electronic services projects for real USC campus clients. We have been using and evolving a method called Model- Based (System) Architecting and Software Engineering (MBASE) for use in both the course and in industrial applications. The MBASE Guidelines include a lot of documents. We teach risk-driven documentation: if it is risky to document something, and not risky to leave it out (e.g., GUI screen placements), leave it out. Even so, students tend to associate more documentation with higher grades, although our grading eventually discourages this. We are always on the lookout for ways to have students learn best practices without having to produce excessive documentation. Thus, we were very interested in analyzing the various emerging agile methods. We found that agile methods and milestone plan-driven methods are part of a “how much planning is enough?” spectrum. Both agile and plan-driven methods have home grounds of project characteristics where they clearly work best, and where the other will have difficulties. Hybrid agile/plan-driven approaches are feasible, and necessary for projects having a mix of agile and plan-driven home ground characteristics. Information technology trends are going more toward the agile methods' home ground characteristics of emergent requirements and rapid change, although there is a concurrent increase in concern with dependability. As a result, we are currently experimenting with risk-driven combinations of MBASE and agile methods, such as integrating requirements, test plans, peer reviews, and pair programming into “agile quality management.”

  20. An agile mask data preparation and writer dispatching approach

    NASA Astrophysics Data System (ADS)

    Hsu, Chih-tung; Chen, Y. S.; Hsin, S. C.; Tuo, Laurent C.; Schulze, Steffen F.

    2004-08-01

    An agile mask data preparation (MDP) approach is proposed to cut re-fracture cycle time as incurred by mask writer dispatching policy changes. Shorter re-fracture cycle time increases the flexibility of mask writer dispatching, as a result, mask writer's capacity can be utilized to its optimum. Preliminary results demonstrate promising benefits in MDP cycle time reduction and writer dispatching flexibility improvement. The agile MDP can save up to 40% of re-fracture cycle time. OASIS (Open Artwork System Interchange Standard) was proposed to address the GDSII file size explosion problem. However, OASIS has yet to gain wide acceptance in the mask industry. The authors envision OASIS adoption by the mask industry as a three-phase process and identify key issues of each phase from the mask manufacturer's perspective. As a long-term MDP flow reengineering project, an agile MDP and writer dispatching approach based on OASIS is proposed. The paper describes the results of an extensive evaluation on OASIS performance compared to that of GDSII, both original GDSII and post-OPC GDSII files. The file size of eighty percent of the original GDSII files is more than ten times larger compared to that of its OASIS counterpart.

  1. AGILE/GRID Science Alert Monitoring System: The Workflow and the Crab Flare Case

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Conforti, V.; Parmiggiani, N.

    2013-10-01

    During the first five years of the AGILE mission we have observed many gamma-ray transients of Galactic and extragalactic origin. A fast reaction to unexpected transient events is a crucial part of the AGILE monitoring program, because the follow-up of astrophysical transients is a key point for this space mission. We present the workflow and the software developed by the AGILE Team to perform the automatic analysis for the detection of gamma-ray transients. In addition, an App for iPhone will be released enabling the Team to access the monitoring system through mobile phones. In 2010 September the science alert monitoring system presented in this paper recorded a transient phenomena from the Crab Nebula, generating an automated alert sent via email and SMS two hours after the end of an AGILE satellite orbit, i.e. two hours after the Crab flare itself: for this discovery AGILE won the 2012 Bruno Rossi prize. The design of this alert system is maximized to reach the maximum speed, and in this, as in many other cases, AGILE has demonstrated that the reaction speed of the monitoring system is crucial for the scientific return of the mission.

  2. Function-based integration strategy for an agile manufacturing testbed

    NASA Astrophysics Data System (ADS)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  3. Design and characterization of frequency agile RF and microwave devices using ferroelectrics

    NASA Astrophysics Data System (ADS)

    Nath, Jayesh

    A methodology for the optimized design of tunable distributed resonators is introduced and verified. This technique enables maximum tuning with minimum degradation in quality (Q) factor. The concept of a network transformation factor and a new figure-of-merit for tunable resonators is introduced and applied to experimental data. The figure-of-merit quantifies the trade-off between tunability and Q factor for a given tuning ratio of the variable reactance device. As such, it can be extended to the design of filters, phase shifters, antennas, matching networks and other frequency-agile devices where resonant elements are used. Varactors utilizing Barium Strontium Titanate (BST) thin-film were designed and fabricated in integrated form and also in discrete form as standard 0603 components. High frequency characterization and modeling of BST varactors is described. A novel characterization technique for the intrinsic loss extraction of symmetrical two-port networks was developed and verified experimentally. Both integrated and discrete BST thin-film varactors were used to design, fabricate and characterize frequency-agile circuits. Tunable bandpass and bandstop filters and matching networks are described. A dual-mode, narrowband microstrip patch antenna with independently tunable modes was developed and characterized. Tuning and nonlinear characterization results are presented. Investigation for the use of BST thin-film varactors for voltage-controlled oscillators and phase shifters are also presented. Design parameters, fabrication issues, and processing challenges are discussed.

  4. Gamma-ray Astrophysics with AGILE

    SciTech Connect

    Longo, Francesco |; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-07-12

    AGILE will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational in spring 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources. Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV AGILE is now (March 2007) undergoing launcher integration and testing. The PLSV launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  5. APID: Agile Protein Interaction DataAnalyzer.

    PubMed

    Prieto, Carlos; De Las Rivas, Javier

    2006-07-01

    Agile Protein Interaction DataAnalyzer (APID) is an interactive bioinformatics web tool developed to integrate and analyze in a unified and comparative platform main currently known information about protein-protein interactions demonstrated by specific small-scale or large-scale experimental methods. At present, the application includes information coming from five main source databases enclosing an unified sever to explore >35 000 different proteins and 111 000 different proven interactions. The web includes search tools to query and browse upon the data, allowing selection of the interaction pairs based in calculated parameters that weight and qualify the reliability of each given protein interaction. Such parameters are for the 'proteins': connectivity, cluster coefficient, Gene Ontology (GO) functional environment, GO environment enrichment; and for the 'interactions': number of methods, GO overlapping, iPfam domain-domain interaction. APID also includes a graphic interactive tool to visualize selected sub-networks and to navigate on them or along the whole interaction network. The application is available open access at http://bioinfow.dep.usal.es/apid/. PMID:16845013

  6. Wideband Agile Digital Microwave Radiometer

    NASA Technical Reports Server (NTRS)

    Gaier, Todd C.; Brown, Shannon T.; Ruf, Christopher; Gross, Steven

    2012-01-01

    The objectives of this work were to take the initial steps needed to develop a field programmable gate array (FPGA)- based wideband digital radiometer backend (>500 MHz bandwidth) that will enable passive microwave observations with minimal performance degradation in a radiofrequency-interference (RFI)-rich environment. As manmade RF emissions increase over time and fill more of the microwave spectrum, microwave radiometer science applications will be increasingly impacted in a negative way, and the current generation of spaceborne microwave radiometers that use broadband analog back ends will become severely compromised or unusable over an increasing fraction of time on orbit. There is a need to develop a digital radiometer back end that, for each observation period, uses digital signal processing (DSP) algorithms to identify the maximum amount of RFI-free spectrum across the radiometer band to preserve bandwidth to minimize radiometer noise (which is inversely related to the bandwidth). Ultimately, the objective is to incorporate all processing necessary in the back end to take contaminated input spectra and produce a single output value free of manmade signals to minimize data rates for spaceborne radiometer missions. But, to meet these objectives, several intermediate processing algorithms had to be developed, and their performance characterized relative to typical brightness temperature accuracy re quirements for current and future microwave radiometer missions, including those for measuring salinity, soil moisture, and snow pack.

  7. Software Development Standard Processes (SDSP)

    NASA Technical Reports Server (NTRS)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; Crean, Kathleen A.; Rinker, George C.; Smith, Thomas P.; Lum, Karen T.; Hanna, Robert A.; Erickson, Daniel E.; Gamble, Edward B., Jr.; Morgan, Scott C.; Kelsay, Michael G.; Newport, Brian J.; Lewicki, Scott A.; Stipanuk, Jeane G.; Cooper, Tonja M.; Meshkat, Leila

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  8. Technology development life cycle processes.

    SciTech Connect

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  9. Gamma-ray astrophysics with AGILE

    NASA Astrophysics Data System (ADS)

    Tavani, M.

    2003-09-01

    Gamma-ray astrophysics above 30 MeV will soon be revitalized by a new generation of high-energy detectors in space. We discuss here the AGILE Mission that will be dedicated to gamma-ray astrophysics above 30 MeV during the period 2005-2006. The main characteristics of AGILE are: (1) excellent imaging and monitoring capabilities both in the γ-ray (30 MeV - 30 GeV) and hard X-ray (10-40 keV) energy ranges (reaching an arcminute source positioning), (2) very good timing (improving by three orders of magnitude the instrumental deadtime for γ-ray detection compared to previous instruments), and (3) excellent imaging and triggering capability for Gamma-Ray Bursts. The AGILE scientific program will emphasize a quick response to gamma-ray transients and multiwavelength studies of gamma-ray sources.

  10. SuperAGILE and Gamma Ray Bursts

    SciTech Connect

    Pacciani, Luigi; Costa, Enrico; Del Monte, Ettore; Donnarumma, Immacolata; Evangelista, Yuri; Feroci, Marco; Frutti, Massimo; Lazzarotto, Francesco; Lapshov, Igor; Rubini, Alda; Soffitta, Paolo; Tavani, Marco; Barbiellini, Guido; Mastropietro, Marcello; Morelli, Ennio; Rapisarda, Massimo

    2006-05-19

    The solid-state hard X-ray imager of AGILE gamma-ray mission -- SuperAGILE -- has a six arcmin on-axis angular resolution in the 15-45 keV range, a field of view in excess of 1 steradian. The instrument is very light: 5 kg only. It is equipped with an on-board self triggering logic, image deconvolution, and it is able to transmit the coordinates of a GRB to the ground in real-time through the ORBCOMM constellation of satellites. Photon by photon Scientific Data are sent to the Malindi ground station at every contact. In this paper we review the performance of the SuperAGILE experiment (scheduled for a launch in the middle of 2006), after its first onground calibrations, and show the perspectives for Gamma Ray Bursts.

  11. Processes and process development in Taiwan

    NASA Technical Reports Server (NTRS)

    Hwang, H. L.

    1986-01-01

    Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

  12. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Derting, T.M.

    1988-07-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  13. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Gillespie, B.L.

    1988-02-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. DE-AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1-Test Plan; Task 2-Optimization of Mild Gasification Process; Task 3-Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4-Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  14. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Williams, S.W.

    1989-01-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  15. Development of mild gasification process

    SciTech Connect

    Chu, C.I.C.; Gillespie, B.L.

    1987-11-01

    Under a previous contract with Morgantown Energy Technology Center (METC), Department of Energy (DOE) Contract No. AC21-84MC21108, UCC Research Corporation (UCCRC) built and tested a 1500 lb/day Mild Gasification Process Development Unit (MGU). The MGU, as tested under the previous contract, is shown in Figure 1. Testing completed under the previous contract showed that good quality hydrocarbon liquids and good quality char can be produced in the MGU. However, the MGU is not optimized. The primary objectives of the current project are to optimize the MGU and determine the suitability of char for several commercial applications. The program consists of four tasks; Task 1 -- Test Plan; Task 2 -- Optimization of Mild Gasification Process; Task 3 -- Evaluation of Char and Char/Coal Blends as a Boiler/Blast Furnace Fuel; and Task 4 -- Analysis of Data and Preparation of Final Report. Task 1 has been completed while work continued on Task 2.

  16. Development of frequency-agile high-repetition-rate CO{sub 2} DIAL systems for long range chemical remote sensing

    SciTech Connect

    Quick, C.R. Jr.; Fite, C.B.; Foy, B.R.; Jolin, J.; Mietz, D.E.

    1997-11-01

    Issues related to the development of direct detection, long-range CO{sub 2} DIAL systems for chemical detection and identification are presented and discussed including: data handling and display techniques for large, multi-{lambda} data sets, turbulence effects, slant path propagation, and speckle averaging. Data examples from various field campaigns and CO{sub 2} lidar platforms are used to illustrate the issues.

  17. An agile enterprise regulation architecture for health information security management.

    PubMed

    Chen, Ying-Pei; Hsieh, Sung-Huai; Cheng, Po-Hsun; Chien, Tsan-Nan; Chen, Heng-Shuen; Luh, Jer-Junn; Lai, Jin-Shin; Lai, Feipei; Chen, Sao-Jie

    2010-09-01

    Information security management for healthcare enterprises is complex as well as mission critical. Information technology requests from clinical users are of such urgency that the information office should do its best to achieve as many user requests as possible at a high service level using swift security policies. This research proposes the Agile Enterprise Regulation Architecture (AERA) of information security management for healthcare enterprises to implement as part of the electronic health record process. Survey outcomes and evidential experiences from a sample of medical center users proved that AERA encourages the information officials and enterprise administrators to overcome the challenges faced within an electronically equipped hospital. PMID:20815748

  18. Process Development for Nanostructured Photovoltaics

    SciTech Connect

    Elam, Jeffrey W.

    2015-01-01

    Photovoltaic manufacturing is an emerging industry that promises a carbon-free, nearly limitless source of energy for our nation. However, the high-temperature manufacturing processes used for conventional silicon-based photovoltaics are extremely energy-intensive and expensive. This high cost imposes a critical barrier to the widespread implementation of photovoltaic technology. Argonne National Laboratory and its partners recently invented new methods for manufacturing nanostructured photovoltaic devices that allow dramatic savings in materials, process energy, and cost. These methods are based on atomic layer deposition, a thin film synthesis technique that has been commercialized for the mass production of semiconductor microelectronics. The goal of this project was to develop these low-cost fabrication methods for the high efficiency production of nanostructured photovoltaics, and to demonstrate these methods in solar cell manufacturing. We achieved this goal in two ways: 1) we demonstrated the benefits of these coatings in the laboratory by scaling-up the fabrication of low-cost dye sensitized solar cells; 2) we used our coating technology to reduce the manufacturing cost of solar cells under development by our industrial partners.

  19. Lean and Agile: An Epistemological Reflection

    ERIC Educational Resources Information Center

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  20. The Frequency Agile Solar Radiotelescope (FASR)

    NASA Astrophysics Data System (ADS)

    White, S. M.; Gary, D. E.; Bastian, T. S.; Hurford, G. J.; Lanzerotti, L. J.

    2003-04-01

    The Frequency Agile Solar Radiotelescope (FASR) is a radio interferometer designed to make high spatial resolution images of the Sun across a broad range of radio wavelengths simultaneously, allowing the technique of imaging spectroscopy to be exploited on a routine basis. The telescope will cover the frequency range 0.1-30 GHz using several sets of receiving elements that provide full-disk imaging, with of order 100 antennas at highest frequency range. FASR will be optimized for solar radio phenomena and will be the most powerful and versatile radioheliograph ever built, providing an improvement of orders of magnitude in image quality over existing instruments. FASR recently received the top ranking amongst all small projects considered by the decadal survey of the National Academy of Science Committee on Solar and Space Physics. FASR will probe all phenomena in the solar atmosphere from the mid-chromosphere outwards. In particular, FASR will provide direct measurement of coronal magnetic field strengths, will image the nonthermal solar atmosphere and show directly the locations of electrons accelerated by solar flares, will provide images of coronal mass ejections travelling outwwards through the solar corona, and supply extensive data products for forecasting and synoptic studies. A major emphasis in the project is to make FASR data as widely and easily used as possible, i.e., providing the general user with processed, fully-calibrated high-quality images that do not need particular knowledge of radio astronomy for interpretation. This paper will describe the telescope and its science goals, and summarize its current status.

  1. Wired Widgets: Agile Visualization for Space Situational Awareness

    NASA Astrophysics Data System (ADS)

    Gerschefske, K.; Witmer, J.

    2012-09-01

    Continued advancement in sensors and analysis techniques have resulted in a wealth of Space Situational Awareness (SSA) data, made available via tools and Service Oriented Architectures (SOA) such as those in the Joint Space Operations Center Mission Systems (JMS) environment. Current visualization software cannot quickly adapt to rapidly changing missions and data, preventing operators and analysts from performing their jobs effectively. The value of this wealth of SSA data is not fully realized, as the operators' existing software is not built with the flexibility to consume new or changing sources of data or to rapidly customize their visualization as the mission evolves. While tools like the JMS user-defined operational picture (UDOP) have begun to fill this gap, this paper presents a further evolution, leveraging Web 2.0 technologies for maximum agility. We demonstrate a flexible Web widget framework with inter-widget data sharing, publish-subscribe eventing, and an API providing the basis for consumption of new data sources and adaptable visualization. Wired Widgets offers cross-portal widgets along with a widget communication framework and development toolkit for rapid new widget development, giving operators the ability to answer relevant questions as the mission evolves. Wired Widgets has been applied in a number of dynamic mission domains including disaster response, combat operations, and noncombatant evacuation scenarios. The variety of applications demonstrate that Wired Widgets provides a flexible, data driven solution for visualization in changing environments. In this paper, we show how, deployed in the Ozone Widget Framework portal environment, Wired Widgets can provide an agile, web-based visualization to support the SSA mission. Furthermore, we discuss how the tenets of agile visualization can generally be applied to the SSA problem space to provide operators flexibility, potentially informing future acquisition and system development.

  2. Perspectives on Industrial Innovation from Agilent, HP, and Bell Labs

    NASA Astrophysics Data System (ADS)

    Hollenhorst, James

    2014-03-01

    Innovation is the life blood of technology companies. I will give perspectives gleaned from a career in research and development at Bell Labs, HP Labs, and Agilent Labs, from the point of view of an individual contributor and a manager. Physicists bring a unique set of skills to the corporate environment, including a desire to understand the fundamentals, a solid foundation in physical principles, expertise in applied mathematics, and most importantly, an attitude: namely, that hard problems can be solved by breaking them into manageable pieces. In my experience, hiring managers in industry seldom explicitly search for physicists, but they want people with those skills.

  3. Impact of emerging technologies on future combat aircraft agility

    NASA Technical Reports Server (NTRS)

    Nguyen, Luat T.; Gilert, William P.

    1990-01-01

    The foreseeable character of future within-visual-range air combat entails a degree of agility which calls for the integration of high-alpha aerodynamics, thrust vectoring, intimate pilot/vehicle interfaces, and advanced weapons/avionics suites, in prospective configurations. The primary technology-development programs currently contributing to these goals are presently discussed; they encompass the F-15 Short Takeoff and Landing/Maneuver Technology Demonstrator Program, the Enhanced Fighter Maneuverability Program, the High Angle-of-Attack Technology Program, and the X-29 Technology Demonstrator Program.

  4. The Southern Argentine Agile Meteor Radar (SAAMER)

    NASA Astrophysics Data System (ADS)

    Janches, Diego

    2014-11-01

    The Southern Argentina Agile Meteor Radar (SAAMER) is a new generation system deployed in Rio Grande, Tierra del Fuego, Argentina (53 S) in May 2008. SAAMER transmits 10 times more power than regular meteor radars, and uses a newly developed transmitting array, which focuses power upward instead of the traditional single-antenna-all-sky configuration. The system is configured such that the transmitter array can also be utilized as a receiver. The new design greatly increases the sensitivity of the radar enabling the detection of large number of particles at low zenith angles. The more concentrated transmitted power enables additional meteor studies besides those typical of these systems based on the detection of specular reflections, such as routine detections of head echoes and non-specular trails, previously only possible with High Power and Large Aperture radars. In August 2010, SAAMER was upgraded to a system capable to determine meteoroid orbital parameters. This was achieved by adding two remote receiving stations approximately 10 km away from the main site in near perpendicular directions. The upgrade significantly expands the science that is achieved with this new radar enabling us to study the orbital properties of the interplanetary dust environment. Because of the unique geographical location, SAAMER allows for additional inter-hemispheric comparison with measurements from Canadian Meteor Orbit Radar, which is geographically conjugate. Initial surveys show, for example, that SAAMER observes a very strong contribution of the South Toroidal Sporadic meteor source, of which limited observational data is available. In addition, SAAMER offers similar unique capabilities for meteor showers and streams studies given the range of ecliptic latitudes that the system enables detailed study of showers at high southern latitudes (e.g July Phoenicids or Puppids complex). Finally, SAAMER is ideal for the deployment of complementary instrumentation in both, permanent

  5. Architecture and performances of the AGILE Telemetry Preprocessing System (TMPPS)

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Lazzarotto, F.; Di Cocco, G.; Fuschino, F.; Tavani, M.

    2008-07-01

    AGILE is an Italian Space Agency (ASI) satellite dedicated to high energy Astrophysics. It was launched successfully on 23 April 2007, and it has been operated by the AGILE Ground Segment, consisting of the Ground Station located in Malindi (Kenia), the Mission Operations Centre (MOC) and the AGILE Data Centre (ADC) established in Italy, at Telespazio in Fucino and at the ASI Science Data Centre (ASDC) in Frascati respectively. Due to the low equatorial orbit at ~ 530 Km. with inclination angle of ~ 2.5°, the satellite passes over the Ground Station every ~ 100'. During the visibility period of . ~ 12', the Telemetry (TM) is down linked through two separated virtual channels, VC0 and VC1. The former is devoted to the real time TM generated during the pass at the average rate of 50 Kbit/s and is directly relayed to the Control Centre. The latter is used to downlink TM data collected on the satellite on-board mass memory during the non visibility period. This generates at the Ground Station a raw TM file of up to 37 MByte. Within 20' after the end of the contact, both the real time and mass memory TM arrive at ADC through the dedicated VPN ASINet. Here they are automatically detected and ingested by the TMPPS pipeline in less than 5 minutes. The TMPPS archives each TM file and sorts its packets into one stream for each of the different TM layout. Each stream is processed in parallel in order to unpack the various telemetry field and archive them into suitable FITS files. Each operation is tracked into a MySQL data base which interfaces the TMPPS pipeline to the rest of the scientific pipeline running at ADC. In this paper the architecture and the performance of the TMPPS will be described and discussed.

  6. Agile multiple aperture imager receiver development

    NASA Astrophysics Data System (ADS)

    Lees, David E. B.; Dillon, Robert F.

    1990-02-01

    A variety of unconventional imaging schemes have been investigated in recent years that rely on small, unphased optical apertures (subaperture) to measure properties of an incoming optical wavefront and recover images of distant objects without using precisely figured, large aperture optical elements. Such schemes offer several attractive features. They provide the potential to create very lare effective aperture that are expandable over time and can be launched into space in small pieces. Since the subapertures are identical in construction, they may be mass producible at potentially low cost. A preliminary design for a practical low cost optical receiver is presented. The multiple aperture design has high sensitivity, wide field-of-view, and is lightweight. A combination of spectral, temporal, and spatial background suppression are used to achieve daytime operation at low signal levels. Modular packaging to make the number of receiver subapertures conveniently scalable is also presented. The design is appropriate to a ground-base proof-of-concept experiment for long range active speckle imaging.

  7. Lesson Learned from AGILE and LARES ASI Projects About MATED Data Collection and Post Analysis

    NASA Astrophysics Data System (ADS)

    Carpentiero, Rita; Mrchetti, Ernesto; Natalucci, Silvia; Portelli, Claudio

    2012-07-01

    ASI has managed and collected data on project development of two scientific all-Italian missions: AGILE and LARES. Collection of the Model And Test Effectiveness Database (MATED) data, concerning Project, AIV (Assembly Integration and Verification) and NCR (Non Conformance Report) aspects has been performed by the Italian Space Agency (ASI), using available technical documentation of both AGILE e LARES projects. In this paper some consideration on the needs of 'real time' data collection is made, together with proposal of front end improvement of this tool. In addition a preliminary analysis of MATED effectiveness related to the above ASI projects will be presented in a bottom-up and post verification approach.

  8. An Ideal Customer: A Grounded Theory of Requirements Elicitation, Communication and Acceptance on Agile Projects

    NASA Astrophysics Data System (ADS)

    Martin, Angela; Biddle, Robert; Noble, James

    This chapter explores the reality of the customer role - a critical, complex, and demanding role on agile teams. Despite initial difficulties, customers love agile development and would not do it any other way, but they also encountered many difficulties in their day-to-day work. In this chapter we describe the practices that have emerged to ensure the role works effectively and sustainably, and how the role has evolved from an individual to a team. We hope customers will find this chapter helpful in performing their role, and programmers will find it useful to understand the complexities of customer's role on the project.

  9. A Quantitative Examination of Critical Success Factors Comparing Agile and Waterfall Project Management Methodologies

    ERIC Educational Resources Information Center

    Pedersen, Mitra

    2013-01-01

    This study investigated the rate of success for IT projects using agile and standard project management methodologies. Any successful project requires use of project methodology. Specifically, large projects require formal project management methodologies or models, which establish a blueprint of processes and project planning activities. This…

  10. Optical flows method for lightweight agile remote sensor design and instrumentation

    NASA Astrophysics Data System (ADS)

    Wang, Chong; Xing, Fei; Wang, Hongjian; You, Zheng

    2013-08-01

    Lightweight agile remote sensors have become one type of the most important payloads and were widely utilized in space reconnaissance and resource survey. These imaging sensors are designed to obtain the high spatial, temporary and spectral resolution imageries. Key techniques in instrumentation include flexible maneuvering, advanced imaging control algorithms and integrative measuring techniques, which are closely correlative or even acting as the bottle-necks for each other. Therefore, mutual restrictive problems must be solved and optimized. Optical flow is the critical model which to be fully represented in the information transferring as well as radiation energy flowing in dynamic imaging. For agile sensors, especially with wide-field-of view, imaging optical flows may distort and deviate seriously when they perform large angle attitude maneuvering imaging. The phenomena are mainly attributed to the geometrical characteristics of the three-dimensional earth surface as well as the coupled effects due to the complicated relative motion between the sensor and scene. Under this circumstance, velocity fields distribute nonlinearly, the imageries may badly be smeared or probably the geometrical structures are changed since the image velocity matching errors are not having been eliminated perfectly. In this paper, precise imaging optical flow model is established for agile remote sensors, for which optical flows evolving is factorized by two forms, which respectively due to translational movement and image shape changing. Moreover, base on that, agile remote sensors instrumentation was investigated. The main techniques which concern optical flow modeling include integrative design with lightweight star sensors along with micro inertial measurement units and corresponding data fusion, the assemblies of focal plane layout and control, imageries post processing for agile remote sensors etc. Some experiments show that the optical analyzing method is effective to

  11. First GRB detections with the AGILE Minicalorimeter

    SciTech Connect

    Marisaldi, M.; Labanti, C.; Fuschino, F.; Bulgarelli, A.; Gianotti, F.; Trifoglio, M.; Galli, M.; Tavani, M.; Argan, A.

    2008-05-22

    The Minicalorimeter (MCAL) onboard the AGILE satellite is a 1400 cm{sup 2} scintillation detector sensitive in the energy range 0.3-200 MeV. MCAL works both as a slave of the AGILE Silicon Tracker and as an autonomous detector for transient events (BURST mode). A dedicated onboard Burst Search logic scans BURST mode data in search of count rate increase. Peculiar characteristics of the detector are the high energy spectral coverage and a timing resolution of about 2 microseconds. Even if a trigger is not issued, BURST mode data are used to build a broad band energy spectrum (scientific ratemeters) organized in 11 bands for each of the two MCAL detection planes, with a time resolution of 1 second. After the first engineering commissioning phase, following the AGILE launch on 23rd April 2007, between 22nd June and 5th November 2007 eighteen GRBs were detected offline in the scientific ratemeters data, with a detection rate of about one per week. In this paper the capabilities of the detector will be described and an overview of the first detected GRBs will be given.

  12. SAMPLE (Sandia agile MEMS prototyping, layout tools, and education)

    NASA Astrophysics Data System (ADS)

    Davies, Brady R.; Craig Barron, Carole; Sniegowski, Jeffry J.; Rodgers, M. Steven

    1997-09-01

    The SAMPLE (Sandia agile MEMS prototyping, layout tools, and education) service makes Sandia's state-of-the-art surface micromachining fabrication process, known as SUMMiT, available to U.S. industry for the first time. The service provides a short course and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (microelectromechanical systems) chips. SUMMiT (Sandia ultra-planar, multi-level MEMS technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  13. SAMPLE (Sandia Agile MEMS Prototyping, Layout tools, and Education)

    SciTech Connect

    Davies, B.R.; Barron, C.C.; Sniegowski, J.J.; Rodgers, M.S.

    1997-08-01

    The SAMPLE (Sandia Agile MEMS Protyping, Layout tools, and Education) service makes Sandia`s state-of-the-art surface-micromachining fabrication process, known as SUMMiT, available to US industry for the first time. The service provides a short cause and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (MicroElectroMechanical Systems) chips. SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  14. Candidate control design metrics for an agile fighter

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

    1991-01-01

    Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

  15. The Test Equipment of the AGILE Minicalorimeter Prototype

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Celesti, E.; Di Cocco, G.; Labanti, C.; Mauri, A.; Prest, M.; Vallazza, E.; Froysland, T.

    2004-09-01

    AGILE is an ASI (Italian Space Agency) Small Space Mission for high energy astrophysics in the range 30 MeV - 50 GeV. The AGILE satellite is currently in the C phase and is planned to be launched in 2005. The Payload shall consist of a Tungsten-Silicon Tracker, a CsI Minicalorimeter, an anticoincidence system and a X-Ray detector sensitive in the 10-40 KeV range. The purpose of the Minicalorimeter (MCAL) is twofold. It shall work in conjunction with the Tracker in order to evaluate the energy of the interacting photons, and it shall operate autonomously in the energy range 250KeV-250 MeV for detection of transients and gamma ray burst events and for the measurement of gamma ray background fluctuations. We present the architecture of the Test Equipment we have designed and developed in order to test and verify the MCAL Simplified Electrical Model prototype which has been manufactured in order to validate the design of the MCAL Proto Flight Model.

  16. An Agile Methodology for Implementing Service-Oriented Architecture in Small and Medium Sized Organizations

    ERIC Educational Resources Information Center

    Laidlaw, Gregory

    2013-01-01

    The purpose of this study is to evaluate the use of Lean/Agile principles, using action research to develop and deploy new technology for Small and Medium sized enterprises. The research case was conducted at the Lapeer County Sheriff's Department and involves the initial deployment of a Service Oriented Architecture to alleviate the data…

  17. Process Accountability in Curriculum Development.

    ERIC Educational Resources Information Center

    Gooler, Dennis D.; Grotelueschen, Arden

    This paper urges the curriculum developer to assume the accountability for his decisions necessitated by the actual ways our society functions. The curriculum developer is encouraged to recognize that he is a salesman with a commodity (the curriculum). He is urged to realize that if he cannot market the package to the customers (the various…

  18. Developing an Internal Processing System.

    ERIC Educational Resources Information Center

    DeFord, Diane

    1997-01-01

    The goal in Reading Recovery is to support children to develop "in the head" operations or strategies that aid them to solve problems as they read and write continuous text. To help children in organizing experience and correct any idiosyncratic or unreliable relationships, teachers must understand how children develop their internal processing…

  19. An Instructional Systems Development Process.

    ERIC Educational Resources Information Center

    Campbell, Clifton P.

    Instructional systems development (ISD) is a systems approach to curriculum development and instructional delivery. It is oriented toward occupational needs with an emphasis on what it is that students must learn to perform specific tasks, what facilities best provide a setting for the neccessary learning, and what instructional methods and media…

  20. Computer vision challenges and technologies for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Molley, Perry A.

    1996-02-01

    applicable to commercial production processes and applications. Computer vision will play a critical role in the new agile production environment for automation of processes such as inspection, assembly, welding, material dispensing and other process control tasks. Although there are many academic and commercial solutions that have been developed, none have had widespread adoption considering the huge potential number of applications that could benefit from this technology. The reason for this slow adoption is that the advantages of computer vision for automation can be a double-edged sword. The benefits can be lost if the vision system requires an inordinate amount of time for reprogramming by a skilled operator to account for different parts, changes in lighting conditions, background clutter, changes in optics, etc. Commercially available solutions typically require an operator to manually program the vision system with features used for the recognition. In a recent survey, we asked a number of commercial manufacturers and machine vision companies the question, 'What prevents machine vision systems from being more useful in factories?' The number one (and unanimous) response was that vision systems require too much skill to set up and program to be cost effective.

  1. The frequency-agile radar: A multifunctional approach to remote sensing of the ionosphere

    NASA Astrophysics Data System (ADS)

    Tsunoda, R. T.; Livingston, R. C.; Buonocore, J. J.; McKinley, A. V.

    1995-09-01

    We introduce a new kind of diagnostic sensor that combines multifunctional measurement capabilities for ionospheric research. Multifunctionality is realized through agility in frequency selection over an extended band (1.5 to 50 MHz), system modularity, complete system control by software written in C, and a user-friendly computer interface. This sensor, which we call the frequency-agile radar (FAR), incorporates dual radar channels and an arbitrary waveform synthesizer that allows creative design of sophisticated waveforms as a means of increasing its sensitivity to weak signals while minimizing loss in radar resolution. The sensitivity of the FAR is determined by two sets of power amplifier modules: four 4-kW solid-state broadband amplifiers, and four 30-kW vacuum tube amplifiers. FAR control is by an AT-bus personal computer with on-line processing by a programmable array processor. The FAR does not simply house the separate functions of most radio sensors in use today, it provides convenient and flexible access to those functions as elements to be used in any combination. Some of the first new results obtained with the FAR during recent field campaigns are presented to illustrate its versatility. These include (1) the first detection of anomalous high-frequency (HF) reflections from a barium ion cloud, (2) the first evidence of unexpectedly large drifts and a shear north of the equatorial electrojet, (3) the first HF radar signature of a developing equatorial plasma bubble, and (4) the first measurements by a portable radar of altitude-extended, quasi-periodic backscatter from midlatitude sporadic E. We also mention the potential of the FAR for atmospheric remote sensing.

  2. Application of side-oblique image-motion blur correction to Kuaizhou-1 agile optical images.

    PubMed

    Sun, Tao; Long, Hui; Liu, Bao-Cheng; Li, Ying

    2016-03-21

    Given the recent development of agile optical satellites for rapid-response land observation, side-oblique image-motion (SOIM) detection and blur correction have become increasingly essential for improving the radiometric quality of side-oblique images. The Chinese small-scale agile mapping satellite Kuaizhou-1 (KZ-1) was developed by the Harbin Institute of Technology and launched for multiple emergency applications. Like other agile satellites, KZ-1 suffers from SOIM blur, particularly in captured images with large side-oblique angles. SOIM detection and blur correction are critical for improving the image radiometric accuracy. This study proposes a SOIM restoration method based on segmental point spread function detection. The segment region width is determined by satellite parameters such as speed, height, integration time, and side-oblique angle. The corresponding algorithms and a matrix form are proposed for SOIM blur correction. Radiometric objective evaluation indices are used to assess the restoration quality. Beijing regional images from KZ-1 are used as experimental data. The radiometric quality is found to increase greatly after SOIM correction. Thus, the proposed method effectively corrects image motion for KZ-1 agile optical satellites. PMID:27136855

  3. Information Models, Data Requirements, and Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, John S.; Crichton, Dan; Ritschel, Bernd; Hardman, Sean; Joyner, Ron

    2015-04-01

    The Planetary Data System's next generation system, PDS4, is an example of the successful use of an ontology-based Information Model (IM) to drive the development and operations of a data system. In traditional systems engineering, requirements or statements about what is necessary for the system are collected and analyzed for input into the design stage of systems development. With the advent of big data the requirements associated with data have begun to dominate and an ontology-based information model can be used to provide a formalized and rigorous set of data requirements. These requirements address not only the usual issues of data quantity, quality, and disposition but also data representation, integrity, provenance, context, and semantics. In addition the use of these data requirements during system's development has many characteristics of Agile Curation as proposed by Young et al. [Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community, AGU 2014], namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. For example customers can be satisfied through early and continuous delivery of system software and services that are configured directly from the information model. This presentation will describe the PDS4 architecture and its three principle parts: the ontology-based Information Model (IM), the federated registries and repositories, and the REST-based service layer for search, retrieval, and distribution. The development of the IM will be highlighted with special emphasis on knowledge acquisition, the impact of the IM on development and operations, and the use of shared ontologies at multiple governance levels to promote system interoperability and data correlation.

  4. Agile and green manufacturing and super hard coated cutting tools

    SciTech Connect

    Chi-Hung Shen

    1995-12-31

    The paper discusses the global movement towards an agile and green manufacturing environment and their impacts on high volume producers such the automotive industry. In the area of machining, two major shifts are envision (1) proliferation of highly flexible CNC single spindle machining centers to replace conventional dedicated transfer lines and (2) implementation of {open_quotes}dry{close_quotes} machining systems where there are no or minimal use of machining fluids. In order to migrate towards these goals and still remain competitive and profitable, economically viable high performance super hard coated cutting tools must be developed. Machining results with CVD diamond coated tools are presented to illustrate their current capabilities and limitations. Key areas for further research and develop of super hard coating tools will also be discussed.

  5. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  6. Managing the Software Development Process

    NASA Astrophysics Data System (ADS)

    Lubelczyk, J.; Parra, A.

    The goal of any software development project is to produce a product that is delivered on time, within the allocated budget, and with the capabilities expected by the customer and unfortunately, this goal is rarely achieved. However, a properly managed project in a mature software engineering environment can consistently achieve this goal. In this paper we provide an introduction to three project success factors, a properly managed project, a competent project manager, and a mature software engineering environment. We will also present an overview of the benefits of a mature software engineering environment based on 24 years of data from the Software Engineering Lab, and suggest some first steps that an organization can take to begin benefiting from this environment. The depth and breadth of software engineering exceeds this paper, various references are cited with a goal of raising awareness and encouraging further investigation into software engineering and project management practices.

  7. Managing the Software Development Process

    NASA Technical Reports Server (NTRS)

    Lubelczky, Jeffrey T.; Parra, Amy

    1999-01-01

    The goal of any software development project is to produce a product that is delivered on time, within the allocated budget, and with the capabilities expected by the customer and unfortunately, this goal is rarely achieved. However, a properly managed project in a mature software engineering environment can consistently achieve this goal. In this paper we provide an introduction to three project success factors, a properly managed project, a competent project manager, and a mature software engineering environment. We will also present an overview of the benefits of a mature software engineering environment based on 24 years of data from the Software Engineering Lab, and suggest some first steps that an organization can take to begin benefiting from this environment. The depth and breadth of software engineering exceeds this paper, various references are cited with a goal of raising awareness and encouraging further investigation into software engineering and project management practices.

  8. Combat Agility Management System (CAMS)

    NASA Technical Reports Server (NTRS)

    Skow, Andrew; Porada, William

    1994-01-01

    The proper management of energy becomes a complex task in fighter aircraft which have high angle of attack (AOA) capability. Maneuvers at high AOA are accompanied by high bleed rates (velocity decrease), a characteristic that is usually undesirable in a typical combat arena. Eidetics has developed under NASA SBIR Phase 1 and NAVAIR SBIR Phase 2 contracts a system which allows a pilot to more easily and effectively manage the trade-off of energy (airspeed or altitude) for turn rate while not imposing hard limits on the high AOA nose pointing capability that can be so important in certain air combat maneuver situations. This has been accomplished by incorporating a two-stage angle of attack limiter into the flight control laws. The first stage sets a limit on AOA to achieve a limit on the maximum bleed rate (selectable) by limiting AOA to values which are dependent on the aircraft attitude and dynamic pressure (or flight path, velocity, and altitude). The second stage sets an AOA limit near the AOA for C(sub l max). One of the principal benefits of such a system is that it enables a low-experience pilot to become much more proficient at managing his energy. The Phase 2 simulation work is complete, and an exploratory flight test on the F-18 HARV is planned for the Fall of 1994 to demonstrate/validate the concept.

  9. Scaling Agile Infrastructure to People

    NASA Astrophysics Data System (ADS)

    Jones, B.; McCance, G.; Traylen, S.; Barrientos Arias, N.

    2015-12-01

    When CERN migrated its infrastructure away from homegrown fabric management tools to emerging industry-standard open-source solutions, the immediate technical challenges and motivation were clear. The move to a multi-site Cloud Computing model meant that the tool chains that were growing around this ecosystem would be a good choice, the challenge was to leverage them. The use of open-source tools brings challenges other than merely how to deploy them. Homegrown software, for all the deficiencies identified at the outset of the project, has the benefit of growing with the organization. This paper will examine what challenges there were in adapting open-source tools to the needs of the organization, particularly in the areas of multi-group development and security. Additionally, the increase in scale of the plant required changes to how Change Management was organized and managed. Continuous Integration techniques are used in order to manage the rate of change across multiple groups, and the tools and workflow for this will be examined.

  10. An Adaptive, Agile, Reconfigurable Photonic System for Handling Analog Signals

    NASA Astrophysics Data System (ADS)

    Middleton, C.; DeSalvo, R.; Escalera, N.

    2014-09-01

    Photonic techniques can be applied to microwave and millimeter wave transmission and signal processing challenges, including signal transport, distribution, filtering, and up- and down-conversion. We present measured performance results for a wideband photonic-assisted frequency converter with 4 GHz instantaneous bandwidth and full spectral coverage up to 45 GHz. The photonic-assisted converter is applicable for both ground and space applications. We show the system performance in a ground station application, in which high frequency analog signals were transported over a moderate distance and down-converted directly into a digitizing receiver. We also describe our progress in the packaging and space qualification of the photonic system, and discuss the next steps toward higher TRL. The photonic system provides an adaptive, agile, reconfigurable backbone for handling analog signals, with performance superior to existing microwave systems.

  11. Agile Bodies: A New Imperative in Neoliberal Governance

    ERIC Educational Resources Information Center

    Gillies, Donald

    2011-01-01

    Modern business discourse suggests that a key bulwark against market fluctuation and the threat of failure is for organizations to become "agile'", a more dynamic and proactive position than that previously afforded by mere "flexibility". The same idea is also directed at the personal level, it being argued that the "agile" individual is better…

  12. Integrated product definition representation for agile numerical control applications

    SciTech Connect

    Simons, W.R. Jr.; Brooks, S.L.; Kirk, W.J. III; Brown, C.W.

    1994-11-01

    Realization of agile manufacturing capabilities for a virtual enterprise requires the integration of technology, management, and work force into a coordinated, interdependent system. This paper is focused on technology enabling tools for agile manufacturing within a virtual enterprise specifically relating to Numerical Control (N/C) manufacturing activities and product definition requirements for these activities.

  13. Development of novel microencapsulation processes

    NASA Astrophysics Data System (ADS)

    Yin, Weisi

    of polymer solution suspended in water or from a spray. Hollow PS particles were obtained by swelling PS latex with solvent, freezing in liquid nitrogen, and drying in vacuum. It is shown that the particle morphology is due to phase separation in the polymer emulsion droplets upon freezing in liquid nitrogen, and that morphological changes are driven largely by lowering interfacial free energy. The dried hollow particles were resuspended in a dispersing media and exposed to a plasticizer, which imparts mobility to polymer chains, to close the surface opening and form microcapsules surrounding an aqueous core. The interfacial free energy difference between the hydrophobic inside and hydrophilic outside surfaces is the major driving force for closing the hole on the surface. A controlled release biodegradable vehicle for drug was made by encapsulating procaine hydrochloride, a water-soluble drug, into the core of poly(DL-lactide) (PLA) microcapsules, which were made by the freeze-drying and subsequent closing process. The encapsulation efficiency is affected by the hollow particle morphology, amount of closing agent, exposure time, surfactant, and method of dispersing the hollow particles in water. Controlled release of procaine hydrochloride from the microcapsules into phosphate buffer was observed. The use of benign solvents dimethyl carbonate in spray/freeze-drying and CO2 for closing would eliminate concerns of residual harmful solvent in the product. The ease of separation of CO2 from the drug solution may also enable recycling of the drug solution to increase the overall encapsulation efficiency using these novel hollow particles.

  14. Analysis of VLF signals associated to AGILE Terrestrial Gamma-ray Flashes detected over Central America

    NASA Astrophysics Data System (ADS)

    Marisaldi, Martino; Lyu, Fanchao; Cummer, Steven; Ursi, Alessandro

    2016-04-01

    Analysis of radio signals detected on ground and associated to Terrestrial Gamma-ray Flashes (TGFs) have proven to be a successful tool to extract information on the TGF itself and the possible associated lightning process. Triangulation of Very Low Frequency (VLF) signals by means of the Time Of Arrival technique provides TGF location with few km accuracy. The AGILE satellite is routinely observing TGFs on a narrow band across the Equator, limited by the small satellite orbital inclination (2.5°). However, until recently it was not possible to provide firm associations between AGILE TGFs and radio signals, because of two main limiting factors. First, dead-time effects led to a bias towards long duration events in AGILE TGF sample, which are less likely associated to strong radio pulses. In addition, most VLF detection networks are less sensitive along the equatorial region. Since the end of March 2015 a major change in the AGILE MiniCalorimeter instrument configuration resulted in a ten fold increase in TGF detection rate, and in the detection of events as short as 20 microseconds. 14% of the events in the new sample resulted simultaneous (within 200 microseconds) to sferics detected by the World Wide Lightning Location Network (WWLLN), therefore a source localisation is available for these events. We present here the first analysis of VLF waveforms associated to AGILE TGFs observed above Central America, detected by magnetic field sensors deployed in Puerto Rico. Among the seven TGFs with a WWLLN location at a distance lower than 10000 km from the sensors, four of them have detectable signals. These events are the closest to the sensors, with distance less than 7500 km. We present here the properties of these TGFs and the characteristics of the associated radio waveforms.

  15. Agile and dexterous robot for inspection and EOD operations

    NASA Astrophysics Data System (ADS)

    Handelman, David A.; Franken, Gordon H.; Komsuoglu, Haldun

    2010-04-01

    The All-Terrain Biped (ATB) robot is an unmanned ground vehicle with arms, legs and wheels designed to drive, crawl, walk and manipulate objects for inspection and explosive ordnance disposal tasks. This paper summarizes on-going development of the ATB platform. Control technology for semi-autonomous legged mobility and dual-arm dexterity is described as well as preliminary simulation and hardware test results. Performance goals include driving on flat terrain, crawling on steep terrain, walking on stairs, opening doors and grasping objects. Anticipated benefits of the adaptive mobility and dexterity of the ATB platform include increased robot agility and autonomy for EOD operations, reduced operator workload and reduced operator training and skill requirements.

  16. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the giant asteroid Vesta and the dwarf planet Ceres, the two largest members of the main asteroid belt. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional low-thrust design objectives (like minimum change in velocity or minimum transfer time) often result in thrust direction time evolutions that cannot be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and turned out to be essential to the successful navigation of Dawn at Vesta.

  17. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the two largest members of the main asteroid belt, the giant asteroid Vesta and the dwarf planet Ceres. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional thrust design objectives (like minimum (Delta)V or minimum transfer time) often result in thrust direction time evolutions that can not be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and necessary to successfully navigate Dawn through all orbital transfers at Vesta.

  18. A new algorithm for agile satellite-based acquisition operations

    NASA Astrophysics Data System (ADS)

    Bunkheila, Federico; Ortore, Emiliano; Circi, Christian

    2016-06-01

    Taking advantage of the high manoeuvrability and the accurate pointing of the so-called agile satellites, an algorithm which allows efficient management of the operations concerning optical acquisitions is described. Fundamentally, this algorithm can be subdivided into two parts: in the first one the algorithm operates a geometric classification of the areas of interest and a partitioning of these areas into stripes which develop along the optimal scan directions; in the second one it computes the succession of the time windows in which the acquisition operations of the areas of interest are feasible, taking into consideration the potential restrictions associated with these operations and with the geometric and stereoscopic constraints. The results and the performances of the proposed algorithm have been determined and discussed considering the case of the Periodic Sun-Synchronous Orbits.

  19. Dynamic tumor tracking using the Elekta Agility MLC

    SciTech Connect

    Fast, Martin F. Nill, Simeon Bedford, James L.; Oelfke, Uwe

    2014-11-01

    Purpose: To evaluate the performance of the Elekta Agility multileaf collimator (MLC) for dynamic real-time tumor tracking. Methods: The authors have developed a new control software which interfaces to the Agility MLC to dynamically program the movement of individual leaves, the dynamic leaf guides (DLGs), and the Y collimators (“jaws”) based on the actual target trajectory. A motion platform was used to perform dynamic tracking experiments with sinusoidal trajectories. The actual target positions reported by the motion platform at 20, 30, or 40 Hz were used as shift vectors for the MLC in beams-eye-view. The system latency of the MLC (i.e., the average latency comprising target device reporting latencies and MLC adjustment latency) and the geometric tracking accuracy were extracted from a sequence of MV portal images acquired during irradiation for the following treatment scenarios: leaf-only motion, jaw + leaf motion, and DLG + leaf motion. Results: The portal imager measurements indicated a clear dependence of the system latency on the target position reporting frequency. Deducting the effect of the target frequency, the leaf adjustment latency was measured to be 38 ± 3 ms for a maximum target speed v of 13 mm/s. The jaw + leaf adjustment latency was 53 ± 3 at a similar speed. The system latency at a target position frequency of 30 Hz was in the range of 56–61 ms for the leaves (v ≤ 31 mm/s), 71–78 ms for the jaw + leaf motion (v ≤ 25 mm/s), and 58–72 ms for the DLG + leaf motion (v ≤ 59 mm/s). The tracking accuracy showed a similar dependency on the target position frequency and the maximum target speed. For the leaves, the root-mean-squared error (RMSE) was between 0.6–1.5 mm depending on the maximum target speed. For the jaw + leaf (DLG + leaf) motion, the RMSE was between 0.7–1.5 mm (1.9–3.4 mm). Conclusions: The authors have measured the latency and geometric accuracy of the Agility MLC, facilitating its future use for clinical

  20. Sensory enhancing insoles improve athletic performance during a hexagonal agility task.

    PubMed

    Miranda, Daniel L; Hsu, Wen-Hao; Gravelle, Denise C; Petersen, Kelsey; Ryzman, Rachael; Niemi, James; Lesniewski-Laas, Nicholas

    2016-05-01

    Athletes incorporate afferent signals from the mechanoreceptors of their plantar feet to provide information about posture, stability, and joint position. Sub-threshold stochastic resonance (SR) sensory enhancing insoles have been shown to improve balance and proprioception in young and elderly participant populations. Balance and proprioception are correlated with improved athletic performance, such as agility. Agility is defined as the ability to quickly change direction. An athlete's agility is commonly evaluated during athletic performance testing to assess their ability to participate in a competitive sporting event. Therefore, the purpose of this study was to examine the effects of SR insoles during a hexagonal agility task routinely used by coaches and sports scientists. Twenty recreational athletes were recruited to participate in this study. Each athlete was asked to perform a set of hexagonal agility trials while SR stimulation was either on or off. Vicon motion capture was used to measure feet position during six successful trials for each stimulation condition. Stimulation condition was randomized in a pairwise fashion. The study outcome measures were the task completion time and the positional accuracy of footfalls. Pairwise comparisons revealed a 0.12s decrease in task completion time (p=0.02) with no change in hopping accuracy (p=0.99) when SR stimulation was on. This is the first study to show athletic performance benefits while wearing proprioception and balance improving equipment on healthy participants. With further development, a self-contained sensory enhancing insole device could be used by recreational and professional athletes to improve movements that require rapid changes in direction. PMID:26944688

  1. Agile Data Curation: A conceptual framework and approach for practitioner data management

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Benedict, K. K.; Lenhardt, W. C.

    2015-12-01

    Data management occurs across a range of science and related activities such as decision-support. Exemplars within the science community operate data management systems that are extensively planned before implementation, staffed with robust data management expertise, equipped with appropriate services and technologies, and often highly structured. However, this is not the only approach to data management and almost certainly not the typical experience. The other end of the spectrum is often an ad hoc practitioner team, with changing requirements, limited training in data management, and resource constrained for both equipment and human resources. Much of the existing data management literature serves the exemplar community and ignores the ad hoc practitioners. Somewhere in the middle are examples where data are repurposed for new uses thereby generating new data management challenges. This submission presents a conceptualization of an Agile Data Curation approach that provides foundational principles for data management efforts operating across the spectrum of data generation and use from large science systems to efforts with constrained resources, limited expertise, and evolving requirements. The underlying principles to Agile Data Curation are a reapplication of agile software development principles to data management. The historical reality for many data management efforts is operating in a practioner environment so Agile Data Curation utilizes historical and current case studies to validate the foundational principles and through comparison learn lessons for future application. This submission will provide an overview of the Agile Data Curation, cover the foundational principles to the approach, and introduce a framework for gathering, classifying, and applying lessons from case studies of practitioner data management.

  2. Intelligent tools and process development for robotic edge finishing: LDRD project final report

    SciTech Connect

    Lewis, C.L.

    1997-08-01

    This report describes a project undertaken to develop an agile automated, high-precision edge finishing system, for fabricating precision parts. The project involved re-designing and adding additional capabilities to an existing finishing work-cell. The resulting work-cell may serve as prototype for production systems to be integrated in highly flexible automated production lines. The system removes burrs formed in the machining process and produces precision chamfers. The system uses an expert system to predict the burr size from the machining history. Within the CAD system, tool paths are generated for burr removal and chamfer formation. Then, the optimal grinding process is automatically selected from a database of processes. The tool trajectory and the selected process definition is then downloaded to a robotic control system to execute the operation. The robotic control system implements a hybrid fuzzy logic-classical control scheme to achieve the desired performance goals regardless of tolerance and fixturing errors. This report describes the system architecture and the system`s performance.

  3. A variability study of the AGILE first catalog of γ-ray sources on 2.3 years of AGILE pointed observations

    NASA Astrophysics Data System (ADS)

    Verrecchia, F.; Pittori, C.; Bulgarelli, A.; Chen, A. W.; Tavani, M.; Giommi, P.; AGILE Collaboration

    2013-01-01

    AGILE pointed observations performed from July 9, 2007 to October 30, 2009 cover a very large time interval, with a γ-ray data archive useful to perform monitoring studies of medium to high brightness γ-ray sources in the 30 MeV-50 GeV energy range. The first AGILE Gamma-Ray Imaging Detector (GRID) catalog (Pittori et al., 2009) included a significance-limited (4σ) sample of 47 sources (1AGL), detected with a conservative analysis over the first-year of operations.We present a variability study of the 1AGL sources over the complete AGILE pointed Observation Blocks (OBs) dataset.In the analysis here reported we used data obtained with an improved full Field of View (FOV) event filter, on a much larger (about 27.5 months) dataset, integrating data on the OB timescales, mostly ranging between 4 and 30 days. The data processing resulted in an improved source list as compared to the 1AGL one. We present here our results on the variability of some of these sources.

  4. Development of the Concise Data Processing Assessment

    ERIC Educational Resources Information Center

    Day, James; Bonn, Doug

    2011-01-01

    The Concise Data Processing Assessment (CDPA) was developed to probe student abilities related to the nature of measurement and uncertainty and to handling data. The diagnostic is a ten question, multiple-choice test that can be used as both a pre-test and post-test. A key component of the development process was interviews with students, which…

  5. Development Process for Science Operation Software

    NASA Astrophysics Data System (ADS)

    Ballester, Pascal

    2015-12-01

    Scientific software development at ESO involves defined processes for the main phases of project inception, monitoring of development performed by instrument consortia, application maintenance, and application support. We discuss the lessons learnt and evolution of the process for the next generation of tools and observing facilities.

  6. ASRM test report: Autoclave cure process development

    NASA Technical Reports Server (NTRS)

    Nachbar, D. L.; Mitchell, Suzanne

    1992-01-01

    ASRM insulated segments will be autoclave cured following insulation pre-form installation and strip wind operations. Following competitive bidding, Aerojet ASRM Division (AAD) Purchase Order 100142 was awarded to American Fuel Cell and Coated Fabrics Company, Inc. (Amfuel), Magnolia, AR, for subcontracted insulation autoclave cure process development. Autoclave cure process development test requirements were included in Task 3 of TM05514, Manufacturing Process Development Specification for Integrated Insulation Characterization and Stripwind Process Development. The test objective was to establish autoclave cure process parameters for ASRM insulated segments. Six tasks were completed to: (1) evaluate cure parameters that control acceptable vulcanization of ASRM Kevlar-filled EPDM insulation material; (2) identify first and second order impact parameters on the autoclave cure process; and (3) evaluate insulation material flow-out characteristics to support pre-form configuration design.

  7. EUV mask process specifics and development challenges

    NASA Astrophysics Data System (ADS)

    Nesladek, Pavel

    2014-07-01

    EUV lithography is currently the favorite and most promising candidate among the next generation lithography (NGL) technologies. Decade ago the NGL was supposed to be used for 45 nm technology node. Due to introduction of immersion 193nm lithography, double/triple patterning and further techniques, the 193 nm lithography capabilities was greatly improved, so it is expected to be used successfully depending on business decision of the end user down to 10 nm logic. Subsequent technology node will require EUV or DSA alternative technology. Manufacturing and especially process development for EUV technology requires significant number of unique processes, in several cases performed at dedicated tools. Currently several of these tools as e.g. EUV AIMS or actinic reflectometer are not available on site yet. The process development is done using external services /tools with impact on the single unit process development timeline and the uncertainty of the process performance estimation, therefore compromises in process development, caused by assumption about similarities between optical and EUV mask made in experiment planning and omitting of tests are further reasons for challenges to unit process development. Increased defect risk and uncertainty in process qualification are just two examples, which can impact mask quality / process development. The aim of this paper is to identify critical aspects of the EUV mask manufacturing with respect to defects on the mask with focus on mask cleaning and defect repair and discuss the impact of the EUV specific requirements on the experiments needed.

  8. Digital processing system for developing countries

    NASA Technical Reports Server (NTRS)

    Nanayakkara, C.; Wagner, H.

    1977-01-01

    An effort was undertaken to perform simple digital processing tasks using pre-existing general purpose digital computers. An experimental software package, LIGMALS, was obtained and modified for this purpose. The resulting software permits basic processing tasks to be performed including level slicing, gray mapping and ratio processing. The experience gained in this project indicates a possible direction which may be used by other developing countries to obtain digital processing capabilities.

  9. The Automated Assembly Team contributions to the APRIMED Agile Manufacturing Project

    SciTech Connect

    Jones, R.E.; Ames, A.L.; Calton, T.L.

    1995-06-01

    The Automated Assembly Team of the APRIMED Project (abbreviated as A{prime}) consists of two parts: the Archimedes Project, which is an ongoing project developing automated assembly technology, and the A{prime} Robot Team. Archimedes is a second generation assembly planning system that both provides a general high-level assembly sequencing capability and, for a smaller class of products, facilitates automatic programming of a robotic workcell to assemble them. The A{prime} robot team designed, developed, and implemented a flexible robot workcell which served as the automated factory of the A{prime} project. In this document we briefly describe the role of automated assembly planning in agile manufacturing, and specifically describe the contributions of the Archimedes project and the A{prime} robot team to the A{prime} project. We introduce the concepts of the Archimedes automated assembly planning project, and discuss the enhancements to Archimedes which were developed in response to the needs of the A{prime} project. We also present the work of the A{prime} robot team in designing and developing the A{prime} robot workcell, including all tooling and programming to support assembly of the A{prime} discriminator devices. Finally, we discuss the process changes which these technologies have enabled in the A{prime} project.

  10. Compact, flexible, frequency agile parametric wavelength converter

    DOEpatents

    Velsko, Stephan P.; Yang, Steven T.

    2002-01-01

    This improved Frequency Agile Optical Parametric Oscillator provides near on-axis pumping of a single QPMC with a tilted periodically poled grating to overcome the necessity to find a particular crystal that will permit collinear birefringence in order to obtain a desired tuning range. A tilted grating design and the elongation of the transverse profile of the pump beam in the angle tuning plane of the FA-OPO reduces the rate of change of the overlap between the pumped volume in the crystal and the resonated and non-resonated wave mode volumes as the pump beam angle is changed. A folded mirror set relays the pivot point for beam steering from a beam deflector to the center of the FA-OPO crystal. This reduces the footprint of the device by as much as a factor of two over that obtained when using the refractive telescope design.

  11. An Examination of an Information Security Framework Implementation Based on Agile Values to Achieve Health Insurance Portability and Accountability Act Security Rule Compliance in an Academic Medical Center: The Thomas Jefferson University Case Study

    ERIC Educational Resources Information Center

    Reis, David W.

    2012-01-01

    Agile project management is most often examined in relation to software development, while information security frameworks are often examined with respect to certain risk management capabilities rather than in terms of successful implementation approaches. This dissertation extended the study of both Agile project management and information…

  12. Robot development for nuclear material processing

    SciTech Connect

    Pedrotti, L.R.; Armantrout, G.A.; Allen, D.C.; Sievers, R.H. Sr.

    1991-07-01

    The Department of Energy is seeking to modernize its special nuclear material (SNM) production facilities and concurrently reduce radiation exposures and process and incidental radioactive waste generated. As part of this program, Lawrence Livermore National Laboratory (LLNL) lead team is developing and adapting generic and specific applications of commercial robotic technologies to SNM pyrochemical processing and other operations. A working gantry robot within a sealed processing glove box and a telerobot control test bed are manifestations of this effort. This paper describes the development challenges and progress in adapting processing, robotic, and nuclear safety technologies to the application. 3 figs.

  13. Development of the selective coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1991-01-01

    The aim of this project is to develop an economical method for producing low-sulfur and low-ash coals using the selective hydrophobic coagulation (SHC) process. This work has been divided into three tasks: (1) project planning and sample acquisition; (2) studies of the fundamental mechanism(s) of the selective coagulation process and the parameters that affect the process of separating coal from both the ash-forming minerals and pyritic sulfur; and (3) bench-scale process development test work to establish the best possible method(s) of separating the hydrophobic and coagula from the dispersed mineral matter.

  14. Software Model Of Software-Development Process

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Synott, Debra J.; Levary, Reuven R.

    1990-01-01

    Collection of computer programs constitutes software tool for simulation of medium- to large-scale software-development projects. Necessary to include easily identifiable and more-readily quantifiable characteristics like costs, times, and numbers of errors. Mathematical model incorporating these and other factors of dynamics of software-development process implemented in the Software Life Cycle Simulator (SLICS) computer program. Simulates dynamics of software-development process. In combination with input and output expert software systems and knowledge-based management software system, develops information for use in managing large software-development project. Intended to aid managers in planning, managing, and controlling software-development processes by reducing uncertainties in budgets, required personnel, and schedules.

  15. GRB 070724B: the first Gamma Ray Burst localized by SuperAGILE

    SciTech Connect

    Del Monte, E.; Costa, E.; Donnarumma, I.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Soffitta, P.; Argan, A.; Pucella, G.; Trois, A.; Vittorini, V.; Evangelista, Y.; Rapisarda, M.; Barbiellini, G.; Longo, F.; Basset, M.; Foggetta, L.; Vallazza, E.; Bulgarelli, A.; Di Cocco, G.

    2008-05-22

    GRB070724B is the first Gamma Ray Burst localized by the SuperAGILE instrument aboard the AGILE space mission. The SuperAGILE localization has been confirmed after the after-glow observation by the XRT aboard the Swift satellite. No significant gamma ray emission above 50 MeV has been detected for this GRB. In this paper we describe the SuperAGILE capabilities in detecting Gamma Ray Burst and the AGILE observation of GRB 070724B.

  16. Scaleup of IGT MILDGAS Process to a process development unit

    SciTech Connect

    Campbell, J.A.L.; Longanbach, J.; Johnson, R.; Underwood, K.; Mead, J.; Carty, R.H.

    1992-12-31

    The MILDGAS process is capable of processing both eastern caking and western non-caking coals to yield a slate of liquid and solid products. The liquids can be processed to produce: feedstocks for chemicals; pitch for use as a binder for electrodes in the aluminum industry; and fuels. Depending on the feed coal characteristics and the operating conditions, the char can be used as an improved fuel for power generation or can be used to make form coke for steel-making blast furnaces or for foundry cupola operations. The specific objectives of the program are to: design, construct, and operate a 24-tons/day adiabatic process development unit (PDU) to obtain process performance data suitable for design scaleup; obtain large batches of coal-derived co-products for industrial evaluation; prepare a detailed design of a demonstration unit; and develop technical and economic plans for commercialization of the MILDGAS process. In this paper, the authors present the process design of the PDU facility, a description of the expected product distribution and the project test plan to be implemented in the program.

  17. EUV extendibility via dry development rinse process

    NASA Astrophysics Data System (ADS)

    Sayan, Safak; Zheng, Tao; De Simone, Danilo; Vandenberghe, Geert

    2016-03-01

    Conventional photoresist processing involves resist coating, exposure, post-exposure bake, development, rinse and spin drying of a wafer. DDRP mitigates pattern collapse by applying a special polymer material (DDRM) which replaces the exposed/developed part of the photoresist material before wafer is spin dried. As noted above, the main mechanism of pattern collapse is the capillary forces governed by surface tension of rinse water and its asymmetrical recession from both sides of the lines during the drying step of the develop process. DDRP essentially eliminates these failure mechanisms by replacing remaining rinse water with DDRM and providing a structural framework that support resist lines from both sides during spin dry process. Dry development rinse process (DDRP) eliminates the root causes responsible for pattern collapse of photoresist line structures. Since these collapse mechanisms are mitigated, without the need for changes in the photoresist itself, achievable resolution of the state-of-the-art EUV photoresists can further be improved.

  18. WRAP process area development control work plan

    SciTech Connect

    Leist, K.L., Fluor Daniel Hanford

    1997-02-27

    This work plan defines the manner in which the Waste Receiving and Processing Facility, Module I Process Area will be maintained under development control status. This status permits resolution of identified design discrepancies, control system changes, as-building of equipment, and perform modifications to increase process operability and maintainability as parallel efforts. This work plan maintains configuration control as these efforts are undertaken. This task will end with system testing and reissue of field verified design drawings.

  19. Course Development: Industrial or Social Process.

    ERIC Educational Resources Information Center

    Kaufman, David

    The development of course materials at the Open Learning Institute, British Columbia, Canada, is examined from two perspectives: as an industrial process and as a social process. The public institute provides distance education through paced home-study courses. The course team model used at the Institute is a system approach. Course development…

  20. Teaching Information Systems Development via Process Variants

    ERIC Educational Resources Information Center

    Tan, Wee-Kek; Tan, Chuan-Hoo

    2010-01-01

    Acquiring the knowledge to assemble an integrated Information System (IS) development process that is tailored to the specific needs of a project has become increasingly important. It is therefore necessary for educators to impart to students this crucial skill. However, Situational Method Engineering (SME) is an inherently complex process that…

  1. A Comprehensive Process for Display Systems Development.

    ERIC Educational Resources Information Center

    Simcox, William A.

    A comprehensive development process for display design, focusing on computer-generated cathode ray tube (CRT) displays is presented. A framework is created for breaking the display into its component parts, used to guide the design process. The objective is to design or select the most cost effective graphics solution (hardware and software) to…

  2. Precision grinding process development for brittle materials

    SciTech Connect

    Blaedel, K L; Davis, P J; Piscotty, M A

    1999-04-01

    High performance, brittle materials are the materials of choice for many of today's engineering applications. This paper describes three separate precision grinding processes developed at Lawrence Liver-more National Laboratory to machine precision ceramic components. Included in the discussion of the precision processes is a variety of grinding wheel dressing, truing and profiling techniques.

  3. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse to pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent Differential Absorption LIDAR (DIAL) measurements in the field.

  4. Clean, agile alternative binders, additives and plasticizers for propellant and explosive formulations

    SciTech Connect

    Hoffman, D.M.; Hawkins, T.W.; Lindsay, G.A.

    1994-12-01

    As part of the Strategic Environmental Research and Development Program (SERDP) a clean, agile manufacturing of explosives, propellants and pyrotechniques (CANPEP) effort set about to identify new approaches to materials and processes for producing propellants, explosives and pyrotechniques (PEP). The RDX based explosive PBXN-109 and gun propellant M-43 were identified as candidates for which waste minimization and recycling modifications might be implemented in a short time frame. The binders, additives and plasticizers subgroup identified cast non-curable thermoplastic elastomer (TPE) formulations as possible replacement candidates for these formulations. Paste extrudable explosives were also suggested as viable alternatives to PBXN-109. Commercial inert and energetic TPEs are reviewed. Biodegradable and hydrolyzable binders are discussed. The applicability of various types of explosive formulations are reviewed and some issues associated with implementation of recyclable formulations are identified. It is clear that some processing and weaponization modifications will need to be made if any of these approaches are to be implemented. The major advantages of formulations suggested here over PBXN-109 and M-43 is their reuse/recyclability. Formulations using TPE or Paste could by recovered from a generic bomb or propellant and reused if they met specification or easily reprocessed and sold to the mining industry.

  5. Agile text mining for the 2014 i2b2/UTHealth Cardiac risk factors challenge.

    PubMed

    Cormack, James; Nath, Chinmoy; Milward, David; Raja, Kalpana; Jonnalagadda, Siddhartha R

    2015-12-01

    This paper describes the use of an agile text mining platform (Linguamatics' Interactive Information Extraction Platform, I2E) to extract document-level cardiac risk factors in patient records as defined in the i2b2/UTHealth 2014 challenge. The approach uses a data-driven rule-based methodology with the addition of a simple supervised classifier. We demonstrate that agile text mining allows for rapid optimization of extraction strategies, while post-processing can leverage annotation guidelines, corpus statistics and logic inferred from the gold standard data. We also show how data imbalance in a training set affects performance. Evaluation of this approach on the test data gave an F-Score of 91.7%, one percent behind the top performing system. PMID:26209007

  6. Process-Based Quality (PBQ) Tools Development

    SciTech Connect

    Cummins, J.L.

    2001-12-03

    The objective of this effort is to benchmark the development of process-based quality tools for application in CAD (computer-aided design) model-based applications. The processes of interest are design, manufacturing, and quality process applications. A study was commissioned addressing the impact, current technologies, and known problem areas in application of 3D MCAD (3-dimensional mechanical computer-aided design) models and model integrity on downstream manufacturing and quality processes. The downstream manufacturing and product quality processes are profoundly influenced and dependent on model quality and modeling process integrity. The goal is to illustrate and expedite the modeling and downstream model-based technologies for available or conceptual methods and tools to achieve maximum economic advantage and advance process-based quality concepts.

  7. The message processing and distribution system development

    NASA Astrophysics Data System (ADS)

    Whitten, K. L.

    1981-06-01

    A historical approach is used in presenting the life cycle development of the Navy's message processing and distribution system beginning with the planning phase and ending with the integrated logistic support phase. Several maintenance problems which occurred after the system was accepted for fleet use were examined to determine if they resulted from errors in the acquisition process. The critical decision points of the acquisition process are examined and constructive recommendations are made for avoiding the problems which hindered the successful development of this system.

  8. ASRM process development in aqueous cleaning

    NASA Technical Reports Server (NTRS)

    Swisher, Bill

    1992-01-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  9. ASRM process development in aqueous cleaning

    NASA Astrophysics Data System (ADS)

    Swisher, Bill

    1992-12-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  10. Using Reflection to Develop Higher Order Processes

    ERIC Educational Resources Information Center

    Lerch, Carol; Bilics, Andrea; Colley, Binta

    2006-01-01

    The main purpose of this study was to look at how we used specific writing assignments in our courses to encourage metacognitive reflection in order to increase the learning that takes place. The study also aimed to aid in the development of higher order processing skills through the development of student reflection. The students involved in the…

  11. Information Processing Theory and Conceptual Development.

    ERIC Educational Resources Information Center

    Schroder, H. M.

    An educational program based upon information processing theory has been developed at Southern Illinois University. The integrating theme was the development of conceptual ability for coping with social and personal problems. It utilized student information search and concept formation as foundations for discussion and judgment and was organized…

  12. The Cassini-Huygens Sequence Development Process

    NASA Technical Reports Server (NTRS)

    Long, Jennifer H.; Heventhal, William M., III; Javidnia, Shahram

    2006-01-01

    Each phase of the sequence development process had to overcome many operational challenges due to the immense complexity of the spacecraft, tour design, pointing capabilities, flight rules and software development. This paper will address the specific challenges related to each of those complexities and the methods used to overcome them during operation.

  13. Cognitive Process of Development in Children

    ERIC Educational Resources Information Center

    Boddington, Eulalee N.

    2009-01-01

    In this article we explored the theories of Arnold Gesell, Erik Erickson and Jean Piaget about how human beings development. In this component we will analyze the cognitive processes of how children perceive and develop, in particular children from a cross-cultural background. How learning takes place, and how the influences of culture, and…

  14. Preform Characterization in VARTM Process Model Development

    NASA Technical Reports Server (NTRS)

    Grimsley, Brian W.; Cano, Roberto J.; Hubert, Pascal; Loos, Alfred C.; Kellen, Charles B.; Jensen, Brian J.

    2004-01-01

    Vacuum-Assisted Resin Transfer Molding (VARTM) is a Liquid Composite Molding (LCM) process where both resin injection and fiber compaction are achieved under pressures of 101.3 kPa or less. Originally developed over a decade ago for marine composite fabrication, VARTM is now considered a viable process for the fabrication of aerospace composites (1,2). In order to optimize and further improve the process, a finite element analysis (FEA) process model is being developed to include the coupled phenomenon of resin flow, preform compaction and resin cure. The model input parameters are obtained from resin and fiber-preform characterization tests. In this study, the compaction behavior and the Darcy permeability of a commercially available carbon fabric are characterized. The resulting empirical model equations are input to the 3- Dimensional Infiltration, version 5 (3DINFILv.5) process model to simulate infiltration of a composite panel.

  15. Autonomous, agile micro-satellites and supporting technologies

    SciTech Connect

    Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

    1999-07-19

    This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

  16. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  17. Computer-aided software development process design

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Levary, Reuven R.

    1989-01-01

    The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

  18. Adult Personality Development: Dynamics and Processes

    PubMed Central

    Diehl, Manfred; Hooker, Karen

    2013-01-01

    The focus of this special issue of Research in Human Development is on adult personality and how personality may contribute to and be involved in adult development. Specifically, the contributions in this issue focus on the links between personality structures (e.g., traits) and personality processes (e.g., goal pursuit, self--regulation) and emphasize the contributions that intensive repeated measurement approaches can make to the understanding of personality and development across the adult life span. PMID:24068889

  19. Federated Process Framework in a Virtual Enterprise Using an Object-Oriented Database and Extensible Markup Language.

    ERIC Educational Resources Information Center

    Bae, Kyoung-Il; Kim, Jung-Hyun; Huh, Soon-Young

    2003-01-01

    Discusses process information sharing among participating organizations in a virtual enterprise and proposes a federated process framework and system architecture that provide a conceptual design for effective implementation of process information sharing supporting the autonomy and agility of the organizations. Develops the framework using an…

  20. Application of multiple-hypothesis tracking to agile beam radar tracking

    NASA Astrophysics Data System (ADS)

    Popoli, Robert F.; Blackman, Samuel S.; Busch, M. T.

    1996-05-01

    This paper describes methods that have been developed for using multiple hypothesis tracking (MHT) for an agile beam radar in the presence of range gate pull off (RGPO) electronic countermeasures (ECM). The paper shows how the agile beam radar allocation logic can be extended to include uncertainty in target position due to data association uncertainty. It also shows how the MHT track score can be modified to reflect target offset from the commanded radar antenna position and how measured SNR is included in the track score. Results from the second Benchmark tracking study are presented. These results show MHT-based allocation to ge highly efficient. The results also show that the system satisfies stringent track maintenance requirements in the presence of RGPO and coincident target maneuvers.

  1. Frequency-agile, rapid scanning spectroscopy

    NASA Astrophysics Data System (ADS)

    Truong, G.-W.; Douglass, K. O.; Maxwell, S. E.; van Zee, R. D.; Plusquellic, D. F.; Hodges, J. T.; Long, D. A.

    2013-07-01

    Challenging applications in trace gas measurements require low uncertainty and high acquisition rates. Many cavity-enhanced spectroscopies exhibit significant sensitivity and potential, but their scanning rates are limited by reliance on either mechanical or thermal frequency tuning. Here, we present frequency-agile, rapid scanning spectroscopy (FARS) in which a high-bandwidth electro-optic modulator steps a selected laser sideband to successive optical cavity modes. This approach involves no mechanical motion and allows for a scanning rate of 8 kHz per cavity mode, a rate that is limited only by the cavity response time itself. Unlike rapidly frequency-swept techniques, FARS does not reduce the measurement duty cycle, degrade the spectrum's frequency axis or require an unusual cavity configuration. FARS allows for a sensitivity of ~2 × 10-12 cm-1 Hz-1/2 and a tuning range exceeding 70 GHz. This technique shows promise for fast and sensitive trace gas measurements and studies of chemical kinetics.

  2. Frequency-agile dual-comb spectroscopy

    NASA Astrophysics Data System (ADS)

    Millot, Guy; Pitois, Stéphane; Yan, Ming; Hovhannisyan, Tatevik; Bendahmane, Abdelkrim; Hänsch, Theodor W.; Picqué, Nathalie

    2016-01-01

    Spectroscopic gas sensing and its applications to, for example, trace detection or chemical kinetics, require ever more demanding measurement times, acquisition rates, sensitivities, precisions and broad tuning ranges. Here, we propose a new approach to near-infrared molecular spectroscopy, utilizing advanced concepts of optical telecommunications and supercontinuum photonics. We generate, without mode-locked lasers, two frequency combs of slightly different repetition frequencies and moderate, but rapidly tunable, spectral span. The output of a frequency-agile continuous-wave laser is split and sent into two electro-optic intensity modulators. Flat-top low-noise frequency combs are produced by wave-breaking in a nonlinear optical fibre of normal dispersion. With a dual-comb spectrometer, we record Doppler-limited spectra spanning 60 GHz within 13 μs and an 80 kHz refresh rate, at a tuning speed of 10 nm s-1. The sensitivity for weak absorption is enhanced by a long gas-filled hollow-core fibre. New opportunities for real-time diagnostics may be opened up, even outside the laboratory.

  3. The Dilemma of High Level Planning in Distributed Agile Software Projects: An Action Research Study in a Danish Bank

    NASA Astrophysics Data System (ADS)

    Svejvig, Per; Fladkjær Nielsen, Ann-Dorte

    The chapter reports on an action research study with the aim to design a high level planning process in distributed and co-located software projects based on agile methods. The main contributions are the insight that high level planning process is highly integrated with other project disciplines and specific steps has to be taken to apply the process in distributed projects; and the action research approach is indeed suitable to software process improvements.

  4. Development of modified FT (MFT) process

    SciTech Connect

    Jinglai Zhou; Zhixin Zhang; Wenjie Shen

    1995-12-31

    Two-Stage Modified FT (MFT) process has been developed for producing high-octane gasoline from coal-based syngas. The main R&D are focused on the development of catalysts and technologies process. Duration tests were finished in the single-tube reactor, pilot plant (100T/Y), and industrial demonstration plant (2000T/Y). A series of satisfactory results has been obtained in terms of operating reliability of equipments, performance of catalysts, purification of coal - based syngas, optimum operating conditions, properties of gasoline and economics etc. Further scaling - up commercial plant is being considered.

  5. Apoptotic processes during mammalian preimplantation development.

    PubMed

    Fabian, Dusan; Koppel, Juraj; Maddox-Hyttel, Poul

    2005-07-15

    The paper provides a review of the current state of knowledge on apoptosis during normal preimplantation development based on the literature and on the authors' own findings. Information is focused on the occurrence and the characteristics of spontaneous apoptotic processes. Reports concerning the chronology and the incidence of programmed cell death in mouse, cow, pig and human embryos in early preimplantation stages up to the blastocyst stage are summarized. In addition, specific attributes of the apoptotic process in mammalian preimplantation development are provided, including the description of both morphological and biochemical features of cell death. PMID:15955348

  6. Development of superplastic steel processing. Final report

    SciTech Connect

    Goldberg, A.

    1995-04-01

    Objective was to provide basis for producing, processing, and forming UHCS (ultrahigh carbon steel) on a commercial scale. Business plans were developed for potential commercialization. Effort was directed at improving the combination of flow stress and forming rates in UHCS alloys in order to make near net shape superplastic forming competitive; the result was the development of a series of UHCS alloys and processing, the selection of which depends on the specific requirements of the commercial application. Useful ancillary properties of these materials include: improved mechanical properties, wear resistance, and oxidation resistance at elevated temperatures.

  7. Development of emission factors for polycarbonate processing.

    PubMed

    Rhodes, Verne L; Kriek, George; Lazear, Nelson; Kasakevich, Jean; Martinko, Marie; Heggs, R P; Holdren, M W; Wisbith, A S; Keigley, G W; Williams, J D; Chuang, J C; Satola, J R

    2002-07-01

    Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 degrees C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations. PMID:12139342

  8. Joint Spitzer and AGILE observations of the blazar 3C 454.3

    NASA Astrophysics Data System (ADS)

    Donnarumma, Immacolata; D'Ammando, Filippo

    2007-12-01

    We require SPITZER IRAC and MIPS observations for multifrequency follow-up of the blazar 3C 454.3. During the last three days AGILE is revealing a strong activity in the gamma-rays band. Joint Spitzer and AGILE observations offers the unprecedented great opportunity to study the correlated variability in the low and high energy peaks. This will contribute to improve the understanding of the structure of the inner jet, the origin of the seed photons for the IC process and then discriminating the different emission models in the red blazars during their high gamma-rays activity. The AGILE Team is going to activate a similar ToO to Swift, while a monitoring in the optical energy band is occurring thanks to WEBT. Therefore Spitzer observation of this blazar will give a unique and extraordinary opportunity to investigate its electromagnetic emission on a wide energy range in its strong flaring activity and then to determine its Spectral Energy Distribution.

  9. The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator

    SciTech Connect

    Ge, Xingjun; Zhang, Jun; Zhong, Huihuang; Qian, Baoliang; Wang, Haitao

    2014-11-03

    The mechanism and realization of a band-agile coaxial relativistic backward-wave oscillator (RBWO) are presented. The operation frequency tuning can be easily achieved by merely altering the inner-conductor length. The key effects of the inner-conductor length contributing to the mechanical frequency tunability are investigated theoretically and experimentally. There is a specific inner-conductor length where the operation frequency can jump from one mode to another mode, which belongs to a different operation band. In addition, the operation frequency is tunable within each operation band. During simulation, the L-band microwave with a frequency of 1.61 GHz is radiated when the inner-conductor length is 39 cm. Meanwhile, the S-band microwave with a frequency of 2.32 GHz is radiated when the inner-conductor length is 5 cm. The frequency adjustment bandwidths of L-band and S-band are about 8.5% and 2%, respectively. Moreover, the online mechanical tunability process is described in detail. In the initial experiment, the generated microwave frequencies remain approximately 1.59 GHz and 2.35 GHz when the inner-conductor lengths are 39 cm and 5 cm. In brief, this technical route of the band-agile coaxial RBWO is feasible and provides a guide to design other types of band-agile high power microwaves sources.

  10. Exercise-Based Fall Prevention in the Elderly: What About Agility?

    PubMed

    Donath, Lars; van Dieën, Jaap; Faude, Oliver

    2016-02-01

    Annually, one in three seniors aged over 65 years fall. Balance and strength training can reduce neuromuscular fall risk factors and fall rates. Besides conventional balance and strength training, explosive or high-velocity strength training, eccentric exercises, perturbation-based balance training, trunk strength, and trunk control have also been emphasized. In contrast, aerobic exercise has to date not been included in fall-prevention studies. However, well-developed endurance capacity might attenuate fatigue-induced declines in postural control in sports-related or general activities of daily living. Physical performance indices, such as balance, strength, and endurance, are generally addressed independently in exercise guidelines. This approach seems time consuming and may impede integrative training of sensorimotor, neuromuscular, and cardiocirculatory functions required to deal with balance-threatening situations in the elderly. An agility-based conceptual training framework comprising perception and decision making (e.g., visual scanning, pattern recognition, anticipation) and changes of direction (e.g., sudden starts, stops and turns; reactive control; concentric and eccentric contractions) might enable an integrative neuromuscular, cardiocirculatory, and cognitive training. The present paper aims to provide a scientific sketch of how to build such an integrated modular training approach, allowing adaptation of intensity, complexity, and cognitive challenge of the agility tasks to the participant's capacity. Subsequent research should address the (1) link between agility and fall risk factors as well as fall rates, (2) benefit-risk ratios of the proposed approach, (3) psychosocial aspects of agility training (e.g., motivation), and (4) logistical requirements (e.g., equipment needed). PMID:26395115

  11. Lexical Morphology: Structure, Process, and Development

    ERIC Educational Resources Information Center

    Jarmulowicz, Linda; Taran, Valentina L.

    2013-01-01

    Recent work has demonstrated the importance of derivational morphology to later language development and has led to a consensus that derivation is a lexical process. In this review, derivational morphology is discussed in terms of lexical representation models from both linguistic and psycholinguistic perspectives. Input characteristics, including…

  12. Development of a New Simultaneous Processing Scale.

    ERIC Educational Resources Information Center

    Keefe, James W.; Languis, Marlin L.

    The Learning Style Profile (LSP), developed in four phases from the fall of 1983 to early 1986, identifies perceptual responses, cognitive skills, study preferences, and instructional preferences. This study assesses the LSP Simultaneous Processing Skill subscale, which is modeled after the work of the Russian neuropsychologist, A. R. Luria.…

  13. L2 Chinese: Grammatical Development and Processing

    ERIC Educational Resources Information Center

    Mai, Ziyin

    2016-01-01

    Two recent books (Jiang, 2014, "Advances in Chinese as a second language"; Wang, 2013, "Grammatical development of Chinese among non-native speakers") provide new resources for exploring the role of processing in acquiring Chinese as a second language (L2). This review article summarizes, assesses and compares some of the…

  14. Developing Qualitative Research Questions: A Reflective Process

    ERIC Educational Resources Information Center

    Agee, Jane

    2009-01-01

    The reflective and interrogative processes required for developing effective qualitative research questions can give shape and direction to a study in ways that are often underestimated. Good research questions do not necessarily produce good research, but poorly conceived or constructed questions will likely create problems that affect all…

  15. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA and McDonnell Douglas Corporation (MDC) personnel remove protective covers from the newly arrived NASA/McDonnell Douglas Corporation X-36 Tailless Fighter Agility Research Aircraft. It arrived at NASA Dryden Flight Research Center, Edwards, California, on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1

  16. Wavelength-Agile Optical Sensor for Exhaust Plume and Cryogenic Fluid Interrogation

    NASA Technical Reports Server (NTRS)

    Sanders, Scott T.; Chiaverini, Martin J.; Gramer, Daniel J.

    2004-01-01

    Two optical sensors developed in UW-Madison labs were evaluated for their potential to characterize rocket engine exhaust plumes and liquid oxygen (LOX) fluid properties. The plume sensor is based on wavelength-agile absorption spectroscopy A device called a chirped white pulse emitter (CWPE) is used to generate the wavelength agile light, scanning, for example, 1340 - 1560 nm every microsecond. Properties of the gases in the rocket plume (for example temperature and water mole fraction) can be monitored using these wavelength scans. We have performed preliminary tests in static gas cells, a laboratory GOX/GH2 thrust chamber, and a solid-fuel hybrid thrust chamber, and these initial tests demonstrate the potential of the CWPE for monitoring rocket plumes. The LOX sensor uses an alternative to wavelength agile sensing: two independent, fixed-wavelength lasers are combined into a single fiber. One laser is absorbed by LOX and the other not: by monitoring the differential transmission the LOX concentration in cryogenic feed lines can be inferred. The sensor was successful in interrogating static LOX pools in laboratory tests. Even in ice- and bubble-laden cryogenic fluids, LOX concentrations were measured to better than 1% with a 3 microsec time constant.

  17. Cytochrome P450 loss-of-function polymorphism genotyping on the Agilent Bioanalyzer and clinical application.

    PubMed

    Piatkov, Irina; Jones, Trudi; Rochester, Colin

    2009-12-01

    Responses to toxins and drugs, even to standard medical drug treatment regimens, can vary significantly between individuals. Similar dosages can have divergent results due to polymorphisms in the genes that code for the enzymes responsible for the metabolism of drugs. The focus of this report is to describe our exploration of the personalized medicine approach for patient care at Sydney West Area Health Service. We would like to demonstrate the importance of this approach as it is the subject of debate in the medical and scientific community. The critical points in this debate are the cost of testing, laboratory space required and clinical application. We have shown that a simple approach and instruments like the Agilent Bioanalyzer could be cost effective for laboratory operation. The Agilent Bioanalyzer (Agilent Technologies, CA, USA) can be used for proteins, DNA and cell studies. Hence, reduced cost of instruments, laboratory space requirements, maintenance and operational costs are great advantages of this technology, especially for development and research laboratories. PMID:19958097

  18. Process development for scum to biodiesel conversion.

    PubMed

    Bi, Chong-hao; Min, Min; Nie, Yong; Xie, Qing-long; Lu, Qian; Deng, Xiang-yuan; Anderson, Erik; Li, Dong; Chen, Paul; Ruan, Roger

    2015-06-01

    A novel process was developed for converting scum, a waste material from wastewater treatment facilities, to biodiesel. Scum is an oily waste that was skimmed from the surface of primary and secondary settling tanks in wastewater treatment plants. Currently scum is treated either by anaerobic digestion or landfilling which raised several environmental issues. The newly developed process used a six-step method to convert scum to biodiesel, a higher value product. A combination of acid washing and acid catalyzed esterification was developed to remove soap and impurities while converting free fatty acids to methyl esters. A glycerol washing was used to facilitate the separation of biodiesel and glycerin after base catalyzed transesterification. As a result, 70% of dried and filtered scum was converted to biodiesel which is equivalent to about 134,000 gallon biodiesel per year for the Saint Paul waste water treatment plant in Minnesota. PMID:25770465

  19. Development of enhanced sulfur rejection processes

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.; Adel, G.T.; Richardson, P.E.

    1996-03-01

    Research at Virginia Tech led to the development of two complementary concepts for improving the removal of inorganic sulfur from many eastern U.S. coals. These concepts are referred to as Electrochemically Enhanced Sulfur Rejection (EESR) and Polymer Enhanced Sulfur Rejection (PESR) processes. The EESR process uses electrochemical techniques to suppress the formation of hydrophobic oxidation products believed to be responsible for the floatability of coal pyrite. The PESR process uses polymeric reagents that react with pyrite and convert floatable middlings, i.e., composite particles composed of pyrite with coal inclusions, into hydrophilic particles. These new pyritic-sulfur rejection processes do not require significant modifications to existing coal preparation facilities, thereby enhancing their adoptability by the coal industry. It is believed that these processes can be used simultaneously to maximize the rejection of both well-liberated pyrite and composite coal-pyrite particles. The project was initiated on October 1, 1992 and all technical work has been completed. This report is based on the research carried out under Tasks 2-7 described in the project proposal. These tasks include Characterization, Electrochemical Studies, In Situ Monitoring of Reagent Adsorption on Pyrite, Bench Scale Testing of the EESR Process, Bench Scale Testing of the PESR Process, and Modeling and Simulation.

  20. New developments of process technologies for microfabrication

    NASA Astrophysics Data System (ADS)

    Piotter, Volker; Hanemann, Thomas; Ruprecht, Robert; Thies, Andreas; Hausselt, Juergen H.

    1997-09-01

    Economic success of microsystems technology requires cost- effective fabrication in large series as well as a great diversity of materials processing technologies. The different techniques of micro molding meet all these requirements. An important economic factor is the reduction of cycle time by process and tool optimization with simulation techniques. Actually, minimal cycle times are about two minutes in certain cases. Evolution of thermoplastics processing technologies is demonstrated by application of technical or even high- performance polymers like PEEK, PMMA or PSU. For manufacturing of metal microstructures, we develop three possibilities: microstructures like stepped LIGA gear wheels are obtained from galvanization on lost molds, which have been injection molded using conductively filled polymers. Additionally, electroless plating is used to replicate nonconducting plastic microstructures and the metal injection molding (MIM) process is under development. A quite different approach uses polymer precursors containing monomer/polymer mixtures in reaction injection molding. We chose photoinduced polymerization without any preheating step using photopolymerizable resins. Avoiding the time consuming thermal cycle, molding takes place at ambient temperature. Due to the low viscosity, the microcavities should be filled completely. The process is characterized by the integration of a powerful UV-source and a partially glass made molding tool.

  1. Process development of thin strip steel casting

    SciTech Connect

    Sussman, R.C.; Williams, R.S.

    1990-12-01

    An important new frontier is being opened in steel processing with the emergence of thin strip casting. Casting steel directly to thin strip has enormous benefits in energy savings by potentially eliminating the need for hot reduction in a hot strip mill. This has been the driving force for numerous current research efforts into the direct strip casting of steel. The US Department of Energy initiated a program to evaluate the development of thin strip casting in the steel industry. In earlier phases of this program, planar flow casting on an experimental caster was studied by a team of engineers from Westinghouse Electric corporation and Armco Inc. A subsequent research program was designed as a fundamental and developmental study of both planar and melt overflow casting processes. This study was arranged as several separate and distinct tasks which were often completed by different teams of researchers. An early task was to design and build a water model to study fluid flow through different designs of planar flow casting nozzles. Another important task was mathematically modeling of melt overflow casting process. A mathematical solidification model for the formation of the strip in the melt overflow process was written. A study of the material and conditioning of casting substrates was made on the small wheel caster using the melt overflow casting process. This report discusses work on the development of thin steel casting.

  2. Thermal EOR process research and development

    SciTech Connect

    Engi, D.; Aeschliman, D.P.; Moreno, J.B.

    1985-01-01

    This paper describes recent results of Research and Development activities associated with thermal EOR processes in the areas of process mapping, downhole steam generator (DSG) materials performance, and insulated tubulars. Field measurements which can be used to map overall geometry and local stability of the displacement fronts would be particularly useful in the context of process control. Electromagnetic techniques which are being developed to make these measurements are currently limited to qualitative interpretations. This paper first describes lab scale physical simulations being conducted to develop a fundamental understanding of the variations in electrical properties associated with the constitutive zones of a recovery process to improve our ability to interpret field data. Field tests in 1981 to 1982 identified DSG combustor material failure as the primary technical concern in DSG development, with the presumption that the failure mode was due to mixed hot gas corrosion. Experimental results are summarized here for a variety of candidate combustor materials, chosen largely for corrosion resistance. No important differences in performance were found. More recently, analytical studies supported by a single experiment on a thin-walled combustor liner have suggested that thermally-induced stress in the thick-walled liners used is the probable cause of failure. Insulated steam injection tubulars have been observed to be less effective in reducing wellbore heat loss if operated in a wet wellbore - a typical situation. Wellbore refluxing, a process analogous to the action of a heat pipe, was proposed in 1983 to be the source of the reduced efficiency. The results of recently completed tests on insulated tubing in wet and dry wellbores are reported. 23 references, 16 figures, 3 tables.

  3. Exothermic furnace module development. [space processing

    NASA Technical Reports Server (NTRS)

    Darnell, R. R.; Poorman, R. M.

    1982-01-01

    An exothermic furnace module was developed to rapidly heat and cool a 0.820-in. (2.1 cm) diameter by 2.75-in. (7.0 cm) long TZM molybdenum alloy crucible. The crucible contains copper, oxygen, and carbon for processing in a low-g environment. Peak temperatures of 1270 C were obtainable 3.5 min after start of ignition, and cooling below 950 C some 4.5 min later. These time-temperature relationships were conditioned for a foam-copper experiment, Space Processing Applications Rocket experiment 77-9, in a sounding rocket having a low-g period of 5 min.

  4. Development of a comprehensive weld process model

    SciTech Connect

    Radhakrishnan, B.; Zacharia, T.; Paul, A.

    1997-05-01

    This cooperative research and development agreement (CRADA) between Concurrent Technologies Corporation (CTC) and Lockheed Martin Energy Systems (LMES) combines CTC`s expertise in the welding area and that of LMES to develop computer models and simulation software for welding processes. This development is of significant impact to the industry, including materials producers and fabricators. The main thrust of the research effort was to develop a comprehensive welding simulation methodology. A substantial amount of work has been done by several researchers to numerically model several welding processes. The primary drawback of most of the existing models is the lack of sound linkages between the mechanistic aspects (e.g., heat transfer, fluid flow, and residual stress) and the metallurgical aspects (e.g., microstructure development and control). A comprehensive numerical model which can be used to elucidate the effect of welding parameters/conditions on the temperature distribution, weld pool shape and size, solidification behavior, and microstructure development, as well as stresses and distortion, does not exist. It was therefore imperative to develop a comprehensive model which would predict all of the above phenomena during welding. The CRADA built upon an already existing three-dimensional (3-D) welding simulation model which was developed by LMES which is capable of predicting weld pool shape and the temperature history in 3-d single-pass welds. However, the model does not account for multipass welds, microstructural evolution, distortion and residual stresses. Additionally, the model requires large resources of computing time, which limits its use for practical applications. To overcome this, CTC and LMES have developed through this CRADA the comprehensive welding simulation model described above.

  5. Compact Process Development at Babcock & Wilcox

    SciTech Connect

    Eric Shaber; Jeffrey Phillips

    2012-03-01

    Multiple process approaches have been used historically to manufacture cylindrical nuclear fuel compacts. Scale-up of fuel compacting was required for the Next Generation Nuclear Plant (NGNP) project to achieve an economically viable automated production process capable of providing a minimum of 10 compacts/minute with high production yields. In addition, the scale-up effort was required to achieve matrix density equivalent to baseline historical production processes, and allow compacting at fuel packing fractions up to 46% by volume. The scale-up approach of jet milling, fluid-bed overcoating, and hot-press compacting adopted in the U.S. Advanced Gas Reactor (AGR) Fuel Development Program involves significant paradigm shifts to capitalize on distinct advantages in simplicity, yield, and elimination of mixed waste. A series of compaction trials have been completed to optimize compaction conditions of time, temperature, and forming pressure using natural uranium oxycarbide (NUCO) fuel at packing fractions exceeding 46% by volume. Results from these trials are included. The scale-up effort is nearing completion with the process installed and operable using nuclear fuel materials. Final process testing is in progress to certify the process for manufacture of qualification test fuel compacts in 2012.

  6. Development of the selective coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1991-01-01

    Recent studies have resulted in the development of a novel agglomeration process for upgrading ultrafine coal. This process, which is known as selective hydrophobic coagulation (SHC), is based on the new finding that hydrophobic coal particles can be selectively coagulated in the presence of dispersed mineral matter. The driving force for the coagulation is believed to be due to the structural arrangement of water molecules near the coal surface. In most cases, simple pH control is all that is required to (1) induce the coagulation of the coal particles and (2) effectively disperse the particles of mineral matter. During the past quarter, several important aspects of the SHC process were examined. Direct measurements of the surface forces which control the selective coagulation process were conducted using a Mark 4 surface force apparatus. These preliminary measurements have provided irrefutable evidence for the existence of the hydrophobic force. Key expressions have been presented for a population balance model describing the hydrophobic coagulation process. In order to validate this model, experimental measurements of the size distributions of coal coagulation have been initiated. The liberation characteristics of samples obtained from the Elkhorn No. 3 and Pittsburgh No. 8 coal seams were determined using a SEM-IPS image processing system. Mixing studies were carried out to determine the effects of mixer-impeller configurations on the coagula size distributions. Bench-scale continuous testing has also been initiated during the past quarter using a rotating drum screen and sedimentation tank. 25 figs., 8 tabs.

  7. a Photon Tag Calibration Beam for the Agile Satellite

    NASA Astrophysics Data System (ADS)

    Hasan, S.; Prest, M.; Foggetta, L.; Pontoni, C.; Mozzanica, A.; Barbiellini, G.; Basset, M.; Liello, F.; Longo, F.; Vallazza, E.; Buonomo, G.; Mazzitelli, G.; Quintieri, L.; Valente, P.; Boffelli, F.; Cattaneo, P.; Mauri, F.

    2006-04-01

    The AGILE satellite will be launched in 2006 for the study of gamma rays in the energy range 30 MeV-50 GeV. The satellite has to be calibrated using gamma rays of known energy. The calibration facility is being developed at the Beam Test Facility (BTF) at the INFN Laboratories in Frascati. The photons are produced by bremsstrahlung of electrons with a maximum momentum of 750 MeV/c. The electrons are tagged using a dipole magnet whose internal walls are covered by microstrip silicon detectors: depending on the energy loss, they impinge on a different strip once the dipole current has been set to a given value. The correlation between the direction of the electron measured by a pair of x-y silicon chambers and the impinging position on the tagging module inside the magnet allows the tagging of the photon. The paper describes the calibration layout and tests and the results, compared with the Montecarlo simulation, in terms of production rate and energy resolution.

  8. SBIR Grant:No-Vibration Agile Cryogenic Optical Refrigerator

    SciTech Connect

    Epstein, Richard

    2013-04-09

    Optical refrigeration is currently the only all-solid-state cryocooling technology that has been demonstrated. Optical cryocoolers are devices that use laser light to cool small crystal or glass cooling elements. The cooling element absorbs the laser light and reradiates it at higher energy, an example of anti-Stokes fluorescence. The dif-ference between the energy of the outgoing and incoming light comes from the thermal energy of the cooling element, which in turn becomes colder. Entitled No-Vibration Agile Cryocoolers using Optical Refrigeration, this Phase I proposal directly addressed the continued development of the optical refrigerator components necessary to transition this scientific breakthrough into National Nu-clear Security Administration (NNSA) sensor applications in line with the objectives of topic 50b. ThermoDynamic Films LLC (TDF), in collaboration with the University of New Mexico (UNM), cooled an optical-refrigerator cooling element comprised of an ytterbium-doped yttrium lithium fluoride (Yb:YLF) crystal from room tempera-ture to 123 K with about 2% efficiency. This is the world record in optical refrigera-tion and an important step toward revolutionizing cryogenic systems for sensor ap-plications. During this period, they also designed and analyzed the crucial elements of a prototype optical refrigerator including the thermal link that connects the cool-ing element with the load.

  9. Advanced PPA Reactor and Process Development

    NASA Technical Reports Server (NTRS)

    Wheeler, Raymond; Aske, James; Abney, Morgan B.; Miller, Lee A.; Greenwood, Zachary

    2012-01-01

    Design and development of a second generation Plasma Pyrolysis Assembly (PPA) reactor is currently underway as part of NASA s Atmosphere Revitalization Resource Recovery effort. By recovering up to 75% of the hydrogen currently lost as methane in the Sabatier reactor effluent, the PPA helps to minimize life support resupply costs for extended duration missions. To date, second generation PPA development has demonstrated significant technology advancements over the first generation device by doubling the methane processing rate while, at the same time, more than halving the required power. One development area of particular interest to NASA system engineers is fouling of the PPA reactor with carbonaceous products. As a mitigation plan, NASA MSFC has explored the feasibility of using an oxidative plasma based upon metabolic CO2 to regenerate the reactor window and gas inlet ports. The results and implications of this testing are addressed along with the advanced PPA reactor development work.

  10. Processed pseudogenes acquired somatically during cancer development.

    PubMed

    Cooke, Susanna L; Shlien, Adam; Marshall, John; Pipinikas, Christodoulos P; Martincorena, Inigo; Tubio, Jose M C; Li, Yilong; Menzies, Andrew; Mudie, Laura; Ramakrishna, Manasa; Yates, Lucy; Davies, Helen; Bolli, Niccolo; Bignell, Graham R; Tarpey, Patrick S; Behjati, Sam; Nik-Zainal, Serena; Papaemmanuil, Elli; Teixeira, Vitor H; Raine, Keiran; O'Meara, Sarah; Dodoran, Maryam S; Teague, Jon W; Butler, Adam P; Iacobuzio-Donahue, Christine; Santarius, Thomas; Grundy, Richard G; Malkin, David; Greaves, Mel; Munshi, Nikhil; Flanagan, Adrienne M; Bowtell, David; Martin, Sancha; Larsimont, Denis; Reis-Filho, Jorge S; Boussioutas, Alex; Taylor, Jack A; Hayes, Neil D; Janes, Sam M; Futreal, P Andrew; Stratton, Michael R; McDermott, Ultan; Campbell, Peter J

    2014-01-01

    Cancer evolves by mutation, with somatic reactivation of retrotransposons being one such mutational process. Germline retrotransposition can cause processed pseudogenes, but whether this occurs somatically has not been evaluated. Here we screen sequencing data from 660 cancer samples for somatically acquired pseudogenes. We find 42 events in 17 samples, especially non-small cell lung cancer (5/27) and colorectal cancer (2/11). Genomic features mirror those of germline LINE element retrotranspositions, with frequent target-site duplications (67%), consensus TTTTAA sites at insertion points, inverted rearrangements (21%), 5' truncation (74%) and polyA tails (88%). Transcriptional consequences include expression of pseudogenes from UTRs or introns of target genes. In addition, a somatic pseudogene that integrated into the promoter and first exon of the tumour suppressor gene, MGA, abrogated expression from that allele. Thus, formation of processed pseudogenes represents a new class of mutation occurring during cancer development, with potentially diverse functional consequences depending on genomic context. PMID:24714652

  11. Processed pseudogenes acquired somatically during cancer development

    PubMed Central

    Cooke, Susanna L.; Shlien, Adam; Marshall, John; Pipinikas, Christodoulos P.; Martincorena, Inigo; Tubio, Jose M.C.; Li, Yilong; Menzies, Andrew; Mudie, Laura; Ramakrishna, Manasa; Yates, Lucy; Davies, Helen; Bolli, Niccolo; Bignell, Graham R.; Tarpey, Patrick S.; Behjati, Sam; Nik-Zainal, Serena; Papaemmanuil, Elli; Teixeira, Vitor H.; Raine, Keiran; O’Meara, Sarah; Dodoran, Maryam S.; Teague, Jon W.; Butler, Adam P.; Iacobuzio-Donahue, Christine; Santarius, Thomas; Grundy, Richard G.; Malkin, David; Greaves, Mel; Munshi, Nikhil; Flanagan, Adrienne M.; Bowtell, David; Martin, Sancha; Larsimont, Denis; Reis-Filho, Jorge S.; Boussioutas, Alex; Taylor, Jack A.; Hayes, Neil D.; Janes, Sam M.; Futreal, P. Andrew; Stratton, Michael R.; McDermott, Ultan; Campbell, Peter J.; Provenzano, Elena; van de Vijver, Marc; Richardson, Andrea L.; Purdie, Colin; Pinder, Sarah; Mac Grogan, Gaetan; Vincent-Salomon, Anne; Larsimont, Denis; Grabau, Dorthe; Sauer, Torill; Garred, Øystein; Ehinger, Anna; Van den Eynden, Gert G.; van Deurzen, C.H.M; Salgado, Roberto; Brock, Jane E.; Lakhani, Sunil R.; Giri, Dilip D.; Arnould, Laurent; Jacquemier, Jocelyne; Treilleux, Isabelle; Caldas, Carlos; Chin, Suet-Feung; Fatima, Aquila; Thompson, Alastair M.; Stenhouse, Alasdair; Foekens, John; Martens, John; Sieuwerts, Anieta; Brinkman, Arjen; Stunnenberg, Henk; Span, Paul N.; Sweep, Fred; Desmedt, Christine; Sotiriou, Christos; Thomas, Gilles; Broeks, Annegein; Langerod, Anita; Aparicio, Samuel; Simpson, Peter T.; van ’t Veer, Laura; Erla Eyfjörd, Jórunn; Hilmarsdottir, Holmfridur; Jonasson, Jon G.; Børresen-Dale, Anne-Lise; Lee, Ming Ta Michael; Wong, Bernice Huimin; Tan, Benita Kiat Tee; Hooijer, Gerrit K.J.

    2014-01-01

    Cancer evolves by mutation, with somatic reactivation of retrotransposons being one such mutational process. Germline retrotransposition can cause processed pseudogenes, but whether this occurs somatically has not been evaluated. Here we screen sequencing data from 660 cancer samples for somatically acquired pseudogenes. We find 42 events in 17 samples, especially non-small cell lung cancer (5/27) and colorectal cancer (2/11). Genomic features mirror those of germline LINE element retrotranspositions, with frequent target-site duplications (67%), consensus TTTTAA sites at insertion points, inverted rearrangements (21%), 5′ truncation (74%) and polyA tails (88%). Transcriptional consequences include expression of pseudogenes from UTRs or introns of target genes. In addition, a somatic pseudogene that integrated into the promoter and first exon of the tumour suppressor gene, MGA, abrogated expression from that allele. Thus, formation of processed pseudogenes represents a new class of mutation occurring during cancer development, with potentially diverse functional consequences depending on genomic context. PMID:24714652

  12. Development of the selective coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1992-07-01

    The selective hydrophobic coagulation (SHC) process is based on the recent finding that hydrophobic particles can be selectively coagulated without using traditional agglomerating agents or flocculants. The driving force for the coagulation is the attractive energy between hydrophobic surfaces, an interaction that has been overlooked in classical colloid chemistry. In most cases, selective separations can be achieved using simple pH control to disperse the mineral matter, followed by recovery of the coal coagula using techniques that take advantage of the size enlargement. In the present work, studies have been carried out to further investigate the fundamental mechanisms of the SHC process and the parameters that affect the process of separating coal from the ash-forming minerals and pyritic sulfur. Studies have included direct force measurements of the attractive interaction between model hydrophobic surfaces, in-situ measurements of the size distributions of coagula formed under a variety of operating conditions, and development of a population balance model to describe the coagulation process. An extended DLVO colloid stability model which includes a hydrophobic interaction energy term has also been developed to explain the findings obtained from the experimental studies. In addition to the fundamental studies, bench-scale process development test work has been performed to establish the best possible method of separating the coagula from dispersed mineral matter. Two types of separators, i.e., a sedimentation tank and a rotating drum screen, were examined in this study. The sedimentation tank proved to be the more efficient unit, achieving ash reductions as high as 60% in a single pass while recovering more than 90% of the combustible material. This device, which minimizes turbulence and coagula breakage, was used in subsequent test work to optimize design and operating parameters.

  13. Pathways to agility in the production of neutron generators

    SciTech Connect

    Stoltz, R.E.; Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W.

    1994-02-01

    This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

  14. Comparison of conventional and microlens-array agile beam steerers

    NASA Astrophysics Data System (ADS)

    McDearmon, Graham F.; Flood, Kevin M.; Finlan, J. Michael

    1995-05-01

    We analyzed the optical and mechanical performance of several designs of agile beam steerers based on refractive microlens arrays for sensing and imaging applications in the visible and infrared wavebands. Ray-trace analyses showed that the best design is capable of steering narrowband illumination +/- 25 degree(s) in two dimensions with nearly diffraction-limited performance. The maximum steering angle depends on the materials. We found that imaging the field of regard takes significantly more time than scanning it unless cameras with very high frame-rates are used. We performed many parametric studies that can be used to optimize the design for any application. We compared optimal designs for microlens-array and conventional galvanometric agile beam steerers. The microlens-array agile beam steerer provides significant improvements in scanning speed, random access pointing, energy consumption, mass reduction, and volume reduction.

  15. A study of a proposed modified torsional agility metric

    NASA Technical Reports Server (NTRS)

    Valasek, John; Eggold, David P.; Downing, David R.

    1991-01-01

    A new candidate lateral agility metric, the modified torsional agility parameter, is proposed and tested through generic, nonlinear, non-real-time flight simulation programs of the F-18 and F-5A. The metric is aimed at quantifying high subsonic loaded roll capabilities which might be useful in modern air combat. The metric is considered to be straightforward for testing and measuring based on nonreal-time unmanned flight simulation. The metric is found to be sensitive to pilot input errors of less than full lateral stick to capture bank angle, when tested using unmanned flight simulations. It is suggested that, for redesigned configurations of both aircraft with improved lateral agility, the major benefit would be provided by fast and highly effective rudders, and a high level of pitch, roll, and yaw damping at moderate to high normal load factor levels.

  16. Development of NIL processes for PV applications

    NASA Astrophysics Data System (ADS)

    Hauser, H.; Tucher, N.; Tokai, K.; Schneider, P.; Wellens, Ch.; Volk, A.; Barke, S.; Müller, C.; Glinsner, T.; Bläsi, B.

    2015-03-01

    Due to its high resolution and applicability for large area patterning, Nanoimprint Lithography (NIL) is a promising technology for photovoltaic (PV) applications. However, a successful industrial application of NIL processes is only possible if large-area processing on thin, brittle and potentially rough substrates can be achieved in a high-throughput process. In this work, the development of NIL processes using the novel SmartNILTM technology from EV Group with a focus on PV applications is described. We applied this tooling to realize a honeycomb texture (8 μm period) on the front side of multicrystalline silicon solar cells leading to an improvement in optical efficiency of 7% relative and a total efficiency gain of 0.5% absolute compared to the industrial standard texture (isotexture). On the rear side of monocrystalline silicon solar cells, we realized diffraction gratings to make use of light trapping effects. An absorption enhancement of up to 35% absolute at a wavelength of 1100 nm is demonstrated. Furthermore, we combined photolithography and NIL processes to introduce features for metal contacts into honeycomb master structures, which initially were realized using interference lithography. As final application, we investigated the realization of very fine contact fingers with prismatic shape in order to minimize reflection losses.

  17. Development of nanoimprint processes for photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Hauser, Hubert; Tucher, Nico; Tokai, Katharina; Schneider, Patrick; Wellens, Christine; Volk, Anne; Seitz, Sonja; Benick, Jan; Barke, Simon; Dimroth, Frank; Müller, Claas; Glinsner, Thomas; Bläsi, Benedikt

    2015-07-01

    Due to its high resolution and applicability for large area patterning, nanoimprint lithography (NIL) is a promising technology for photovoltaic (PV) applications. However, a successful industrial application of NIL processes is only possible if large-area processing on thin, brittle, and potentially rough substrates can be achieved in a high-throughput process. The development of NIL processes using the SmartNIL technology from EV Group with a focus on PV applications is described. The authors applied this tooling to realize a honeycomb texture (8 μm period) on the front side of multicrystalline silicon solar cells, leading to an improvement in optical efficiency of 7% relative and a total efficiency gain of 0.5% absolute compared to the industrial standard texture (isotexture). On the rear side of monocrystalline silicon solar cells, the authors realized diffraction gratings to make use of light trapping effects. An absorption enhancement of up to 35% absolute at a wavelength of 1100 nm is demonstrated. Furthermore, photolithography was combined with NIL processes to introduce features for metal contacts into honeycomb master structures, which were initially realized using interference lithography. As a final application, the authors investigated the realization of very fine contact fingers with prismatic shape in order to minimize reflection losses.

  18. Anthropometric factors related to sprint and agility performance in young male soccer players

    PubMed Central

    Mathisen, Gunnar; Pettersen, Svein Arne

    2015-01-01

    Objective To investigate the relationship between anthropometrics and sprint and agility performance and describe the development of sprint (acceleration) and agility performance in 10- to 16-year-old male soccer players. Methods One hundred and thirty-two participants were divided into three age groups, 10–12 years (mean 10.8±0.50), 13–14 years (mean 13.9±0.50), and 15–16 years (mean 15.5±0.24), with assessment of 20 m sprint with 10 m split time and agility performance related to body height and body mass within groups. Results In the 10- to 12-year-olds, there were no significant correlations between height, weight, and the performance variables, except for body mass, which was correlated to 10–20 m sprint (r=0.30). In the 13- to 14-year-olds, body height was significantly correlated with 10 m sprint (r=0.50) and 20 m sprint (r=0.52), as well as 10–20 m sprint (r=0.50) and agility performance (r=0.28). In the 15- to 16-year-old group, body height was correlated to 20 m (r=0.38) and 10–20 m (r=0.45) sprint. Body mass was significantly correlated to 10 m spring (r=0.35) in the 13- to 14-year-olds, as well as 20 m (r=0.33) and 10–20 m (r=0.35) sprint in the 15- to 16-year-olds. Conclusion Height and body mass were significantly correlated with sprint performance in 13- to 16-year-old male soccer players. However, the 10- to 12-year-olds showed no significant relationship between sprint performance and anthropometrics, except for a small correlation in 10–20 m sprint. This may be attributed to maturation, with large differences in body height and body mass due to different patterns in the growth spurt. The agility performance related to anthropometrics was insignificant apart from a moderate correlation in the 13- to 14-year-olds. PMID:26604842

  19. Biorobotics: using robots to emulate and investigate agile locomotion.

    PubMed

    Ijspeert, Auke J

    2014-10-10

    The graceful and agile movements of animals are difficult to analyze and emulate because locomotion is the result of a complex interplay of many components: the central and peripheral nervous systems, the musculoskeletal system, and the environment. The goals of biorobotics are to take inspiration from biological principles to design robots that match the agility of animals, and to use robots as scientific tools to investigate animal adaptive behavior. Used as physical models, biorobots contribute to hypothesis testing in fields such as hydrodynamics, biomechanics, neuroscience, and prosthetics. Their use may contribute to the design of prosthetic devices that more closely take human locomotion principles into account. PMID:25301621

  20. Aging Processes and the Development of Osteoarthritis

    PubMed Central

    Loeser, Richard F.

    2013-01-01

    Purpose of review Aging is a primary risk factor for the development of osteoarthritis (OA) and the understanding of how aging processes contribute to the development of OA is an important area of active research. The most recent literature in this area was reviewed in order update investigators on the status of the field. Recent findings The field is beginning to move beyond a cartilage focus to include other joint tissues relevant to OA such as ligaments, meniscus, and bone. Synovitis also appears to play a role in OA but has not been a focus of aging studies. Studies in small animals, including mice and rats, demonstrate age-related changes that can contribute to OA and show that animal age is a key factor to be considered in interpreting the results of studies using surgically-induced models of OA. There is accumulating evidence that cellular processes such as damage-induced cell senescence contribute to OA and a growing body of literature on the role of epigenetic regulation of gene expression in aging and OA. Summary Not all OA is due to aging processes in joint tissues but the age-related changes being discovered certainly could play a major contributing role. PMID:23080227

  1. Development of the selective hydrophobic coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1992-01-01

    A novel technique for selectively coagulating and separating coal from dispersed mineral matter has been developed at Virginia Tech. The process, Selective Hydrophobic Coagulation (SHC), has been studied since 1986 under the sponsorship of the US Department of Energy. The SHC process differs from oil agglomeration, shear or polymer flocculation, and electrolytic coagulation processes in that it does not require reagents or additives to induce the formation of coagula. In most cases, simple pH control is all that is required to (i) induce the coagulation of coal particles and (ii) effectively disperse particles of mineral matter. If the coal is oxidized, a small dosage of reagents can be used to enhance the process. The technical work program was initiated on July 1, 1992. Force-distance curves were generated for DDOA Br-coated mica surfaces in water and used to calculate hydrophobicity constants and decay lengths for this system; and a new device for the measurement of water contact angles, similar to the Wilhelmy plate balance, has been built 225 kg samples of Pittsburgh No. 8 and Elkhom No. 3 seam coals were obtained; a static mixer test facility for the study of coagula growth was set up and was undergoing shakedown tests at the end of the quarter; a bench-scale lamella thickener was being constructed; and preliminary coagula/ mineral separation tests were being conducted in a bench-scale continuous drum filter.

  2. Development of the Selective Hydrophobic Coagulation process

    SciTech Connect

    Yoon, R.H.; Luttrell, G.H.

    1992-01-01

    A novel technique for selectively coagulating and separating coal from dispersed mineral matter has been developed at Virginia Tech. The process, Selective Hydrophobic Coagulation (SHC), has been studied since 1986 under the sponsorship of the US Department of Energy (Contracts AC22-86PC91221 and AC22-90PC90174). The SHC process differs from oil agglomeration, shear or polymer flocculation, and electrolytic coagulation processes in that it does not require reagents or additives to induce the formation of coagula. In most cases, simple pH control is all that is required to (1) induce the coagulation of coal particles and (2) effectively disperse particles of mineral matter. If the coal is oxidized, a small dosage of reagents can be used to enhance the process. During the quarter, the Anutech Mark IV surface force apparatus was used to generate surface force-distance data for the mica/dodecylamine hydrochloride system (Task 2.1.1). Work to characterize the hydrophobicity of this system and the mica/DDOA[sup [minus

  3. Tubeless evaporation process development: Final report

    SciTech Connect

    Not Available

    1987-12-01

    A tubeless evaporation process which has the potential to combine the advantage of both evaporation and freezing processes, without their disadvantages is being developed. The TEP is capable of concentrating process solutions of such things as sugar, caustic soda, salt, sodium sulfate, black liquor from the pulp and paper industry, cooling tower blowdown, ''spent'' pickling liquor (sulfuric acid) from the steel industry, and nitric acid with potential energy savings of half to three-quarters of the energy required by conventional evaporators, with about half of the capital and maintenance cost. It has similar potential for the production of fresh water from seawater. The process uses working fluids (WF's) at their freezing point to effect direct contact heat exchange. The purpose of this project was to find additional and lower cost WF's in the laboratory, to obtain sizing information for the major equipment for an economic evaluation and a pilot plant design in a bench scale plant, and to perform the economic evaluation, and the pilot plant design and cost estimate. 6 refs., 37 figs., 7 tabs.

  4. Process development for cladding APT tungsten targets

    SciTech Connect

    Horner, M H; Barber, R; Dalder, E

    2000-11-27

    This report describes development of processes for cladding APT Target tungsten components with a thin layer (0.127-mm) of Alloy 718, Alloy 600 or 316L stainless steel alloy. The application requires that the cladding be thermally bonded to the tungsten in order to transfer heat generated in the tungsten volume to a surrounding coolant. High temperature diffusion bonding using the hot isostatic processing (HIP) technique was selected as the method for creating a metallurgical bond between pure tungsten tubes and rods and the cladding materials. Bonding studies using a uniaxially loaded vacuum hot press were conducted in preliminary experiments to determine acceptable time-temperature conditions for diffusion bonding. The results were successfully applied in cladding tungsten rods and tubes with these alloys. Temperatures 800-810 C were suitable for cladding tungsten with Alloy 600 and 316L stainless steel alloy, whereas tungsten was clad with Alloy 718 at 1020 C.

  5. System Development by Process Integrated Knowledge Management

    NASA Astrophysics Data System (ADS)

    Stoll, Margareth; Laner, Dietmar

    Due to globalization and ever shorter change cycle's organizations improve increasingly faster their products, services, technologies, IT and organization according to customer requirements, optimize their efficiency, effectiveness and reduce costs. Thus the largest potential is the continually improvement and the management of information, data and knowledge. Long time organizations had developed lot separate and frequently independent IT applications. In the last years they were integrated by interfaces and always more by common databases. In large sized enterprises or in the public administration IT must operate various different applications, which requires a lot of personal and cost. Many organizations improve their IT starting from the lived processes using new technologies, but ask not, how they can use technology to support new processes.

  6. Skylab materials processing facility experiment developer's report

    NASA Technical Reports Server (NTRS)

    Parks, P. G.

    1975-01-01

    The development of the Skylab M512 Materials Processing Facility is traced from the design of a portable, self-contained electron beam welding system for terrestrial applications to the highly complex experiment system ultimately developed for three Skylab missions. The M512 experiment facility was designed to support six in-space experiments intended to explore the advantages of manufacturing materials in the near-zero-gravity environment of Earth orbit. Detailed descriptions of the M512 facility and related experiment hardware are provided, with discussions of hardware verification and man-machine interfaces included. An analysis of the operation of the facility and experiments during the three Skylab missions is presented, including discussions of the hardware performance, anomalies, and data returned to earth.

  7. Development of a Comprehensive Weld Process Model

    SciTech Connect

    Radhakrishnan, B.; Zacharia, T.

    1997-05-01

    This cooperative research and development agreement (CRADA) between Concurrent Technologies Corporation (CTC) and Lockheed Martin Energy Systems (LMES) combines CTC's expertise in the welding area and that of LMES to develop computer models and simulation software for welding processes. This development is of significant impact to the industry, including materials producers and fabricators. The main thrust of the research effort was to develop a comprehensive welding simulation methodology. A substantial amount of work has been done by several researchers to numerically model several welding processes. The primary drawback of most of the existing models is the lack of sound linkages between the mechanistic aspects (e.g., heat transfer, fluid flow, and residual stress) and the metallurgical aspects (e.g., microstructure development and control). A comprehensive numerical model which can be used to elucidate the effect of welding parameters/conditions on the temperature distribution, weld pool shape and size, solidification behavior, and microstructure development, as well as stresses and distortion, does not exist. It was therefore imperative to develop a comprehensive model which would predict all of the above phenomena during welding. The CRADA built upon an already existing three- dimensional (3-D) welding simulation model which was developed by LMES which is capable of predicting weld pool shape and the temperature history in 3-d single-pass welds. However, the model does not account for multipass welds, microstructural evolution, distortion and residual stresses. Additionally, the model requires large resources of computing time, which limits its use for practical applications. To overcome this, CTC and LMES have developed through this CRADA the comprehensive welding simulation model described above. The following technical tasks have been accomplished as part of the CRADA. 1. The LMES welding code has been ported to the Intel Paragon parallel computer at ORNL

  8. FODEM: A Multi-Threaded Research and Development Method for Educational Technology

    ERIC Educational Resources Information Center

    Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

    2012-01-01

    Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

  9. Process Development in the Teaching Laboratory

    NASA Astrophysics Data System (ADS)

    Klein, Leonard C.; Dana, Susanne M.

    1998-06-01

    Many experiences in high school and undergraduate laboratories are well-tested cookbook recipes that have already been designed to yield optimal results; the well-known synthesis of aspirin is such an example. In this project for advanced placement or second-year high school chemistry students, students mimic the process development in industrial laboratories by investigating the effect of varying conditions in the synthesis of aspirin. The class decides on criteria that should be explored (quantity of catalyst, temperature of reaction, etc.). The class is then divided into several teams with each team assigned a variable to study. Each team must submit a proposal describing how they will explore the variable before they start their study. After data on yield and purity has been gathered and evaluated, students discuss which method is most desirable, based on their agreed-upon criteria. This exercise provides an opportunity for students to review many topics from the course (rate of reaction, limiting reagents, Beer's Law) while participating in a cooperative exercise designed to imitate industrial process development.

  10. Developing cultural differences in face processing.

    PubMed

    Kelly, David J; Liu, Shaoying; Rodger, Helen; Miellet, Sébastien; Ge, Liezhong; Caldara, Roberto

    2011-09-01

    Perception and eye movements are affected by culture. Adults from Eastern societies (e.g. China) display a disposition to process information holistically, whereas individuals from Western societies (e.g. Britain) process information analytically. Recently, this pattern of cultural differences has been extended to face processing. Adults from Eastern cultures fixate centrally towards the nose when learning and recognizing faces, whereas adults from Western societies spread fixations across the eye and mouth regions. Although light has been shed on how adults can fixate different areas yet achieve comparable recognition accuracy, the reason why such divergent strategies exist is less certain. Although some argue that culture shapes strategies across development, little direct evidence exists to support this claim. Additionally, it has long been claimed that face recognition in early childhood is largely reliant upon external rather than internal face features, yet recent studies have challenged this theory. To address these issues, we tested children aged 7-12 years of age from the UK and China with an old/new face recognition paradigm while simultaneously recording their eye movements. Both populations displayed patterns of fixations that were consistent with adults from their respective cultural groups, which 'strengthened' across development as qualified by a pattern classifier analysis. Altogether, these observations suggest that cultural forces may indeed be responsible for shaping eye movements from early childhood. Furthermore, fixations made by both cultural groups almost exclusively landed on internal face regions, suggesting that these features, and not external features, are universally used to achieve face recognition in childhood. PMID:21884332

  11. The influence of agility training on physiological and cognitive performance.

    PubMed

    Lennemann, Lynette M; Sidrow, Kathryn M; Johnson, Erica M; Harrison, Catherine R; Vojta, Christopher N; Walker, Thomas B

    2013-12-01

    Agility training (AT) has recently been instituted in several military communities in hopes of improving combat performance and general fitness. The purpose of this study was to determine how substituting AT for traditional military physical training (PT) influences physical and cognitive performance. Forty-one subjects undergoing military technical training were divided randomly into 2 groups for 6 weeks of training. One group participated in standard military PT consisting of calisthenics and running. A second group duplicated the amount of exercise of the first group but used AT as their primary mode of training. Before and after training, subjects completed a physical and cognitive battery of tests including V[Combining Dot Above]O2max, reaction time, Illinois Agility Test, body composition, visual vigilance, dichotic listening, and working memory tests. There were significant improvements within the AT group in V[Combining Dot Above]O2max, Illinois Agility Test, visual vigilance, and continuous memory. There was a significant increase in time-to-exhaustion for the traditional group. We conclude that AT is as effective or more effective as PT in enhancing physical fitness. Further, it is potentially more effective than PT in enhancing specific measures of physical and cognitive performance, such as physical agility, memory, and vigilance. Consequently, we suggest that AT be incorporated into existing military PT programs as a way to improve war-fighter performance. Further, it seems likely that the benefits of AT observed here occur in various other populations. PMID:23442271

  12. VizieR Online Data Catalog: AGILE bright gamma-ray sources updated list (Verrecchia+, 2013)

    NASA Astrophysics Data System (ADS)

    Verrecchia, F.; Pittori, C.; Chen, A. W.; Bulgarelli, A.; Tavani, M.; Lucarelli, F.; Giommi, P.; Vercellone, S.; Pellizzoni, A.; Giuliani, A.; Longo, F.; Barbiellini, G.; Trifoglio, M.; Gianotti, F.; Argan, A.; Antonelli, L. A.; Caraveo, P.; Cardillo, M.; Cattaneo, P. W.; Cocco, V.; Colafrancesco, S.; Contessi, T.; Costa, E.; Del Monte, E.; De Paris, G.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Evangelista, Y.; Fanari, G.; Feroci, M.; Ferrari, A.; Fiorini, M.; Fornari, F.; Fuschino, F.; Froysland, T.; Frutti, M.; Galli, M.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Liello, F.; Lipari, P.; Mattaini, E.; Marisaldi, M.; Mastropietro, M.; Mauri, A.; Mauri, F.; Mereghetti, S.; Morelli, E.; Moretti, E.; Morselli, A.; Pacciani, L.; Perotti, F.; Piano, G.; Picozza, P.; Pilia, M.; Pontoni, C.; Porrovecchio, G.; Prest, M.; Primavera, R.; Pucella, G.; Rapisarda, M.; Rappoldi, A.; Rossi, E.; Rubini, A.; Sabatini, S.; Santolamazza, P.; Sotta, P.; Stellato, S.; Striani, E.; Tamburelli, F.; Traci, A.; Trois, A.; Vallazza, E.; Vittorini, V.; Zanello, D.; Salotti, L.; Valentini, G.

    2013-10-01

    We present a variability study of a sample of bright γ-ray (30MeV-50GeV ) sources. This sample is an extension of the first AGILE catalogue of -ray sources (1AGL), obtained using the complete set of AGILE observations in pointing mode performed during a 2.3 year period from July 9, 2007 until October 30, 2009. The dataset of AGILE pointed observations covers a long time interval and its γ-ray data archive is useful for monitoring studies of medium-to-high brightness γ-ray sources. In the analysis reported here, we used data obtained with an improved event filter that covers a wider field of view, on a much larger (about 27.5 months) dataset, integrating data on observation block time scales, which mostly range from a few days to thirty days. The data processing resulted in a better characterized source list than 1AGL was, and includes 54 sources, 7 of which are new high galactic latitude (|BII|>=5) sources, 8 are new sources on the galactic plane, and 20 sources from the previous catalogue with revised positions. Eight 1AGL sources (2 high-latitude and 6 on the galactic plane) were not detected in the final processing either because of low Observing Block (OB) exposure and/or due to their position in complex galactic regions. We report the results in a catalogue of all the detections obtained in each single OB, including the variability results for each of these sources. In particular, we found that 12 sources out of 42 or 11 out of 53 are variable, depending on the variability index used, where 42 and 53 are the number of sources for which these indices could be calculated. Seven of the 11 variable sources are blazars, the others are Crab pulsar+nebula, LS I +61 303, Cyg X-3, and 1AGLR J2021+4030. (2 data files).

  13. Array Databases: Agile Analytics (not just) for the Earth Sciences

    NASA Astrophysics Data System (ADS)

    Baumann, P.; Misev, D.

    2015-12-01

    Gridded data, such as images, image timeseries, and climate datacubes, today are managed separately from the metadata, and with different, restricted retrieval capabilities. While databases are good at metadata modelled in tables, XML hierarchies, or RDF graphs, they traditionally do not support multi-dimensional arrays.This gap is being closed by Array Databases, pioneered by the scalable rasdaman ("raster data manager") array engine. Its declarative query language, rasql, extends SQL with array operators which are optimized and parallelized on server side. Installations can easily be mashed up securely, thereby enabling large-scale location-transparent query processing in federations. Domain experts value the integration with their commonly used tools leading to a quick learning curve.Earth, Space, and Life sciences, but also Social sciences as well as business have massive amounts of data and complex analysis challenges that are answered by rasdaman. As of today, rasdaman is mature and in operational use on hundreds of Terabytes of timeseries datacubes, with transparent query distribution across more than 1,000 nodes. Additionally, its concepts have shaped international Big Data standards in the field, including the forthcoming array extension to ISO SQL, many of which are supported by both open-source and commercial systems meantime. In the geo field, rasdaman is reference implementation for the Open Geospatial Consortium (OGC) Big Data standard, WCS, now also under adoption by ISO. Further, rasdaman is in the final stage of OSGeo incubation.In this contribution we present array queries a la rasdaman, describe the architecture and novel optimization and parallelization techniques introduced in 2015, and put this in context of the intercontinental EarthServer initiative which utilizes rasdaman for enabling agile analytics on Petascale datacubes.

  14. Development of a dynamic thermal model process

    SciTech Connect

    Smith, F. R.

    1996-04-01

    A dynamic electrical-thermal modeling simulation technique was developed to allow up-front design of thermal and electronic packaging with a high degree of accuracy and confidence. We are developing a hybrid multichip module output driver which controls with power MOSFET driver circuits. These MOSFET circuits will dissipate from 13 to 26 watts per driver in a physical package less than two square inches. The power dissipation plus an operating temperature range of -55{degrees} C to 100{degrees} C makes an accurate thermal package design critical. The project goal was to develop a simulation process to dynamically model the electrical/thermal characteristics of the power MOSFETS using the SABER analog simulator and the ABAQUS finite element simulator. SABER would simulate the electrical characteristics of the multi-chip module design while co-simulation is being done with ABAQUS simulating the solid model thermal characteristics of the MOSFET package. The dynamic parameters, MOSFET power and chip temperature, would be actively passed between simulators to effect a coupled simulator modelling technique. The project required a development of a SABER late for the analog ASIC controller circuit, a dynamic electrical/thermal template for the IRF150 and IRF9130 power MOSFETs, a solid model of the multi-chip module package, FORTRAN code to handle I/Q between and HP755 workstation and SABER, and I/O between CRAY J90 computer and ABAQUS. The simulation model was certified by measured electrical characteristics of the circuits and real time thermal imaging of the output multichip module.

  15. Development of the SOFIA Image Processing Tool

    NASA Technical Reports Server (NTRS)

    Adams, Alexander N.

    2011-01-01

    The Stratospheric Observatory for Infrared Astronomy (SOFIA) is a Boeing 747SP carrying a 2.5 meter infrared telescope capable of operating between at altitudes of between twelve and fourteen kilometers, which is above more than 99 percent of the water vapor in the atmosphere. The ability to make observations above most water vapor coupled with the ability to make observations from anywhere, anytime, make SOFIA one of the world s premiere infrared observatories. SOFIA uses three visible light CCD imagers to assist in pointing the telescope. The data from these imagers is stored in archive files as is housekeeping data, which contains information such as boresight and area of interest locations. A tool that could both extract and process data from the archive files was developed.

  16. Developing processing techniques for Skylab data

    NASA Technical Reports Server (NTRS)

    Nalepka, R. F. (Principal Investigator); Malila, W. A.; Morgenstern, J. P.

    1975-01-01

    The author has identified the following significant results. The effects of misregistration and the scan-line-straightening algorithm on multispectral data were found to be: (1) there is greatly increased misregistration in scan-line-straightening data over conic data; (2) scanner caused misregistration between any pairs of channels may not be corrected for in scan-line-straightened data; and (3) this data will have few pure field center pixels than will conic data. A program SIMSIG was developed implementing the signature simulation model. Data processing stages of the experiment were carried out, and an analysis was made of the effects of spatial misregistration on field center classification accuracy. Fifteen signatures originally used for classifying the data were analyzed, showing the following breakdown: corn (4 signatures), trees (2), brush (1), grasses, weeds, etc. (5), bare soil (1), soybeans (1), and alfalfa (1).

  17. Socioeconomic Status, Family Processes, and Individual Development

    PubMed Central

    Conger, Rand D.; Conger, Katherine J.; Martin, Monica J.

    2010-01-01

    Research during the past decade shows that social class or socioeconomic status (SES) is related to satisfaction and stability in romantic unions, the quality of parent-child relationships, and a range of developmental outcomes for adults and children. This review focuses on evidence regarding potential mechanisms proposed to account for these associations. Research findings reported during the past decade demonstrate support for an interactionist model of the relationship between SES and family life, which incorporates assumptions from both the social causation and social selection perspectives. The review concludes with recommendations for future research on SES, family processes and individual development in terms of important theoretical and methodological issues yet to be addressed. PMID:20676350

  18. Development of the LICADO coal cleaning process

    SciTech Connect

    Not Available

    1990-07-31

    Development of the liquid carbon dioxide process for the cleaning of coal was performed in batch, variable volume (semi-continuous), and continuous tests. Continuous operation at feed rates up to 4.5 kg/hr (10-lb/hr) was achieved with the Continuous System. Coals tested included Upper Freeport, Pittsburgh, Illinois No. 6, and Middle Kittanning seams. Results showed that the ash and pyrite rejections agreed closely with washability data for each coal at the particle size tested (-200 mesh). A 0.91 metric ton (1-ton) per hour Proof-of-Concept Plant was conceptually designed. A 181 metric ton (200 ton) per hour and a 45 metric ton (50 ton) per hour plant were sized sufficiently to estimate costs for economic analyses. The processing costs for the 181 metric ton (200 ton) per hour and 45 metric ton (50 ton) per hour were estimated to be $18.96 per metric ton ($17.20 per ton) and $11.47 per metric ton ($10.40 per ton), respectively for these size plants. The costs for the 45 metric ton per hour plant are lower because it is assumed to be a fines recovery plant which does not require a grinding circuit of complex waste handling system.

  19. Developing hypertension guidelines: an evolving process.

    PubMed

    Kotchen, Theodore A

    2014-06-01

    Hypertension guidelines provide up-to-date information and recommendations for hypertension management to healthcare providers, and they facilitate translation of new knowledge into clinical practice. Guidelines represent consensus statements by expert panels, and the process of guideline development has inherent vulnerabilities. Between 1977 and 2003, under the direction of the National Institutes of Health (NIH), the Joint National Committee on Detection, Evaluation, and Treatment of High Blood Pressure (JNC) issued 7 reports. The evolution of the JNC recommendations reflects the acquisition of observational and clinical trial data and the availability of newer antihypertensive drugs. Despite 5 years in preparation, NIH did not release a JNC 8 report and recently made the decision to withdraw from issuing guidelines. The responsibility for issuing hypertension-related guidelines was transferred to the American Heart Association (AHA) and the American College of Cardiology. Without the endorsement of the NIH or the AHA, JNC 8 committee members recently published their guideline report. Notably, there have been discrepancies of JNC recommendations over time as well as discrepancies with recommendations of other professional organizations. The Institute of Medicine recently recommended criteria for "trustworthy" guidelines. Criticisms of the guideline process, and of the guidelines themselves, should not obscure their likely contribution to improved hypertension control and to decreases of mortality rates of stroke and cardiovascular disease over the past several decades. Nevertheless, translation of guidelines into clinical practice remains a challenge. PMID:24572703

  20. Accurate and agile digital control of optical phase, amplitude and frequency for coherent atomic manipulation of atomic systems.

    PubMed

    Thom, Joseph; Wilpers, Guido; Riis, Erling; Sinclair, Alastair G

    2013-08-12

    We demonstrate a system for fast and agile digital control of laser phase, amplitude and frequency for applications in coherent atomic systems. The full versatility of a direct digital synthesis radiofrequency source is faithfully transferred to laser radiation via acousto-optic modulation. Optical beatnotes are used to measure phase steps up to 2π, which are accurately implemented with a resolution of ≤ 10 mrad. By linearizing the optical modulation process, amplitude-shaped pulses of durations ranging from 500 ns to 500 ms, in excellent agreement with the programmed functional form, are demonstrated. Pulse durations are limited only by the 30 ns rise time of the modulation process, and a measured extinction ratio of > 5 × 10(11) is achieved. The system presented here was developed specifically for controlling the quantum state of trapped ions with sequences of multiple laser pulses, including composite and bichromatic pulses. The demonstrated techniques are widely applicable to other atomic systems ranging across quantum information processing, frequency metrology, atom interferometry, and single-photon generation. PMID:23938787

  1. Organizational Agility and Complex Enterprise System Innovations: A Mixed Methods Study of the Effects of Enterprise Systems on Organizational Agility

    ERIC Educational Resources Information Center

    Kharabe, Amol T.

    2012-01-01

    Over the last two decades, firms have operated in "increasingly" accelerated "high-velocity" dynamic markets, which require them to become "agile." During the same time frame, firms have increasingly deployed complex enterprise systems--large-scale packaged software "innovations" that integrate and automate…

  2. High alpha feedback control for agile half-loop maneuvers of the F-18 airplane

    NASA Technical Reports Server (NTRS)

    Stalford, Harold

    1988-01-01

    A nonlinear feedback control law for the F/A-18 airplane that provides time-optimal or agile maneuvering of the half-loop maneuver at high angles of attack is given. The feedback control law was developed using the mathematical approach of singular perturbations, in which the control devices considered were conventional aerodynamic control surfaces and thrusting. The derived nonlinear control law was used to simulate F/A-18 half-loop maneuvers. The simulated results at Mach 0.6 and 0.9 compared well with pilot simulations conducted at NASA.

  3. Agile beam laser radar using computational imaging for robotic perception

    NASA Astrophysics Data System (ADS)

    Powers, Michael A.; Stann, Barry L.; Giza, Mark M.

    2015-05-01

    This paper introduces a new concept that applies computational imaging techniques to laser radar for robotic perception. We observe that nearly all contemporary laser radars for robotic (i.e., autonomous) applications use pixel basis scanning where there is a one-to-one correspondence between world coordinates and the measurements directly produced by the instrument. In such systems this is accomplished through beam scanning and/or the imaging properties of focal-plane optics. While these pixel-basis measurements yield point clouds suitable for straightforward human interpretation, the purpose of robotic perception is the extraction of meaningful features from a scene, making human interpretability and its attendant constraints mostly unnecessary. The imposing size, weight, power and cost of contemporary systems is problematic, and relief from factors that increase these metrics is important to the practicality of robotic systems. We present a system concept free from pixel basis sampling constraints that promotes efficient and adaptable sensing modes. The cornerstone of our approach is agile and arbitrary beam formation that, when combined with a generalized mathematical framework for imaging, is suited to the particular challenges and opportunities of robotic perception systems. Our hardware concept looks toward future systems with optical device technology closely resembling modern electronically-scanned-array radar that may be years away from practicality. We present the design concept and results from a prototype system constructed and tested in a laboratory environment using a combination of developed hardware and surrogate devices for beam formation. The technological status and prognosis for key components in the system is discussed.

  4. Technology Transfer and the Product Development Process

    SciTech Connect

    Mock, John E.

    1989-03-21

    It is my pleasure this morning to address a topic that is much talked about in passing but rarely examined from a first person point of view. That topic is Technology Transfer. Over the next 30 minutes I'd like to approach Technology Transfer within the context of the Product Development Process looking at it from the perspectives of the federal government researcher and the industry manufacturer/user. Fist let us recognize that we are living in an ''Information Age'', where global economic and military competition is determined as much by technology as it is by natural resource assets. It is estimated that technical/scientific information is presently growing at a rate of l3 percent per year; this is expected to increase to 30 percent per year by the turn of the century. In fact, something like 90 percent of all scientific knowledge has been generated in the last 30 years; this pool will double again in the next 10-15 years (Exhibit 1). Of all the scientists and engineers throughout history, 90% live and work in the present time. Successfully managing this technical information/knowledge--i.e., transforming the results of R&D to practical applications--will be an important measure of national strength. A little over a dozen years ago, the United States with only 5 percent of the world's population was generating approximately 75 percent of the world's technology. The US. share is now 50 percent and may decline to 30 percent by the turn of the century. This decline won't be because of downturn in U.S. technological advances but because the other 95 percent of the world's population will be increasing its contribution. Economic and military strength then, will be determined by how quickly and successfully companies, industries, and nations can apply new technological information to practical applications--i.e., how they manage technology transfer within the context of the product development process. Much discussion and pronouncements are ongoing in public forums

  5. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The tailless X-36 technology demonstrator research aircraft cruises over the California desert at low altitude during a 1997 research flight. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a wingspan of just over 10 feet. A Williams International F112 turbofan engine

  6. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The X-36 technology demonstrator shows off its distinctive shape as the remotely piloted aircraft flies a research mission over the Southern California desert on October 30, 1997. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a wingspan of just over 10 feet. A Williams

  7. X-36 Tailless Fighter Agility Research Aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    The lack of a vertical tail on the X-36 technology demonstrator is evident as the remotely piloted aircraft flies a low-altitude research flight above Rogers Dry Lake at Edwards Air Force Base in the California desert on October 30, 1997. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three

  8. High Power and Frequency-Agile Optical Parametric Oscillators for Airborne DIAL Measurements of CH4 and H2O

    NASA Astrophysics Data System (ADS)

    Nehrir, A. R.; Shuman, T.; Chuang, T.; Hair, J. W.; Refaat, T. F.; Ismail, S.; Kooi, S. A.; Notari, A.

    2014-12-01

    Atmospheric methane (CH4) has the second largest radiative forcing of the long-lived greenhouse gasses (GHG) after carbon dioxide. However, methane's much shorter atmospheric lifetime and much stronger warming potential make its radiative forcing equivalent to that for CO2 over a 20-year time horizon which makes CH4 a particularly attractive target for mitigation strategies. Similar to CH4, water vapor (H2O) is the most dominant of the short-lived GHG in the atmosphere and plays a key role in many atmospheric processes. Atmospheric H2O concentrations span over four orders of magnitude from the planetary boundary layer where high impact weather initiates to lower levels in the upper troposphere and lower stratosphere (UTLS) where water vapor has significant and long term impacts on the Earth's radiation budget. NASA Langley has fostered the technology development with Fibertek, Inc. to develop frequency agile and high power (> 3 W) pulsed lasers using similar architectures in the 1645 nm and 935 nm spectral bands for DIAL measurements of CH4 and H2O, respectively. Both systems utilize high power 1 kHz pulse repetition frequency Nd:YAG lasers to generate high power laser emission at the desired wavelength via optical parametric oscillators (OPO). The CH4 OPO, currently in its final build stage in a SBIR Phase II program has demonstrated >2 W average power with injection seeding from a distributed feedback (DFB) laser during risk reduction experiments. The H2O OPO has demonstrated high power operation (>2 W) during the SBIR Phase I program while being injection seeded with a DFB laser, and is currently funded via an SBIR Phase II to build a robust system for future integration into an airborne water vapor DIAL system capable of profiling from the boundary layer up to the UTLS. Both systems have demonstrated operation with active OPO wavelength control to allow for optimization of the DIAL measurements for operation at different altitudes and geographic regions. An

  9. Laboratory directed research and development final report: Intelligent tools for on-machine acceptance of precision machined components

    SciTech Connect

    Christensen, N.G.; Harwell, L.D.; Hazelton, A.

    1997-02-01

    On-Machine Acceptance (OMA) is an agile manufacturing concept being developed for machine tools at SNL. The concept behind OMA is the integration of product design, fabrication, and qualification processes by using the machining center as a fabrication and inspection tool. This report documents the final results of a Laboratory Directed Research and Development effort to qualify OMA.

  10. An agile acquisition decision-support workbench for evaluating ISR effectiveness

    NASA Astrophysics Data System (ADS)

    Stouch, Daniel W.; Champagne, Valerie; Mow, Christopher; Rosenberg, Brad; Serrin, Joshua

    2011-06-01

    The U.S. Air Force is consistently evolving to support current and future operations through the planning and execution of intelligence, surveillance and reconnaissance (ISR) missions. However, it is a challenge to maintain a precise awareness of current and emerging ISR capabilities to properly prepare for future conflicts. We present a decisionsupport tool for acquisition managers to empirically compare ISR capabilities and approaches to employing them, thereby enabling the DoD to acquire ISR platforms and sensors that provide the greatest return on investment. We have developed an analysis environment to perform modeling and simulation-based experiments to objectively compare alternatives. First, the analyst specifies an operational scenario for an area of operations by providing terrain and threat information; a set of nominated collections; sensor and platform capabilities; and processing, exploitation, and dissemination (PED) capacities. Next, the analyst selects and configures ISR collection strategies to generate collection plans. The analyst then defines customizable measures of effectiveness or performance to compute during the experiment. Finally, the analyst empirically compares the efficacy of each solution and generates concise reports to document their conclusions, providing traceable evidence for acquisition decisions. Our capability demonstrates the utility of using a workbench environment for analysts to design and run experiments. Crafting impartial metrics enables the acquisition manager to focus on evaluating solutions based on specific military needs. Finally, the metric and collection plan visualizations provide an intuitive understanding of the suitability of particular solutions. This facilitates a more agile acquisition strategy that handles rapidly changing technology in response to current military needs.

  11. Development of a reburning boiler process model

    SciTech Connect

    Wu, K.T.

    1992-01-30

    The overall objective of this program is to integrate EER's expertise in boiler reburning performance evaluation into a package of analytical computer tools. Specific objectives of the program are to develop a computational capability with the following features: (1) can be used to predict the impact of gas reburning application on thermal conditions in the boiler radiant furnace, and on overall boiler performance; (2) can estimate gas reburning NO{sub x} reduction effectiveness based on specific reburning configurations and furnace/boiler configurations; (3) can be used as an analytical tool to evaluate the impact of boiler process parameters (e.g., fuel switching and changes in boiler operating conditions) on boiler thermal performance; (4) is adaptable to most boiler designs (tangential and wall fire boilers) and a variety of fuels (solid, liquid, gaseous and slurried fuels); (5) is sufficiently user friendly to be exercisable by engineers with a reasonable knowledge of boilers, and with reasonable computer skills. Here, user friendly'' means that the user will be guided by computer codes during the course of setting up individual input files for the boiler performance model.

  12. Model development for naphthenic acids ozonation process.

    PubMed

    Al Jibouri, Ali Kamel H; Wu, Jiangning

    2015-02-01

    Naphthenic acids (NAs) are toxic constituents of oil sands process-affected water (OSPW) which is generated during the extraction of bitumen from oil sands. NAs consist mainly of carboxylic acids which are generally biorefractory. For the treatment of OSPW, ozonation is a very beneficial method. It can significantly reduce the concentration of NAs and it can also convert NAs from biorefractory to biodegradable. In this study, a factorial design (2(4)) was used for the ozonation of OSPW to study the influences of the operating parameters (ozone concentration, oxygen/ozone flow rate, pH, and mixing) on the removal of a model NAs in a semi-batch reactor. It was found that ozone concentration had the most significant effect on the NAs concentration compared to other parameters. An empirical model was developed to correlate the concentration of NAs with ozone concentration, oxygen/ozone flow rate, and pH. In addition, a theoretical analysis was conducted to gain the insight into the relationship between the removal of NAs and the operating parameters. PMID:25189805

  13. ON DEVELOPING CLEANER ORGANIC UNIT PROCESSES

    EPA Science Inventory

    Organic waste products, potentially harmful to the human health and the environment, are primarily produced in the synthesis stage of manufacturing processes. Many such synthetic unit processes, such as halogenation, oxidation, alkylation, nitration, and sulfonation are common to...

  14. Developing Cultural Differences in Face Processing

    ERIC Educational Resources Information Center

    Kelly, David J.; Liu, Shaoying; Rodger, Helen; Miellet, Sebastien; Ge, Liezhong; Caldara, Roberto

    2011-01-01

    Perception and eye movements are affected by culture. Adults from Eastern societies (e.g. China) display a disposition to process information "holistically," whereas individuals from Western societies (e.g. Britain) process information "analytically." Recently, this pattern of cultural differences has been extended to face processing. Adults from…

  15. BENCH SCALE SALTSTONE PROCESS DEVELOPMENT MIXING STUDY

    SciTech Connect

    Cozzi, A.; Hansen, E.

    2011-08-03

    The Savannah River National Laboratory (SRNL) was requested to develop a bench scale test facility, using a mixer, transfer pump, and transfer line to determine the impact of conveying the grout through the transfer lines to the vault on grout properties. Bench scale testing focused on the effect the transfer line has on the rheological property of the grout as it was processed through the transfer line. Rheological and other physical properties of grout samples were obtained prior to and after pumping through a transfer line. The Bench Scale Mixing Rig (BSMR) consisted of two mixing tanks, grout feed tank, transfer pump and transfer hose. The mixing tanks were used to batch the grout which was then transferred into the grout feed tank. The contents of the feed tank were then pumped through the transfer line (hose) using a progressive cavity pump. The grout flow rate and pump discharge pressure were monitored. Four sampling stations were located along the length of the transfer line at the 5, 105 and 205 feet past the transfer pump and at 305 feet, the discharge of the hose. Scaling between the full scale piping at Saltstone to bench scale testing at SRNL was performed by maintaining the same shear rate and total shear at the wall of the transfer line. The results of scaling down resulted in a shorter transfer line, a lower average velocity, the same transfer time and similar pressure drops. The condition of flow in the bench scale transfer line is laminar. The flow in the full scale pipe is in the transition region, but is more laminar than turbulent. The resulting plug in laminar flow in the bench scale results in a region of no-mixing. Hence mixing, or shearing, at the bench scale should be less than that observed in the full scale, where this plug is non existent due to the turbulent flow. The bench scale tests should be considered to be conservative due to the highly laminar condition of flow that exists. Two BSMR runs were performed. In both cases, wall

  16. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Weltevrede, Patrick; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Kramer, Michael; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory

    2009-10-01

    We request time to observe 160 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 2 Agile papers, 4 Fermi papers, 3 radio papers and authors on 3 papers in submission. The data are contributing to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group.

  17. Simulation Modeling of Software Development Processes

    NASA Technical Reports Server (NTRS)

    Calavaro, G. F.; Basili, V. R.; Iazeolla, G.

    1996-01-01

    A simulation modeling approach is proposed for the prediction of software process productivity indices, such as cost and time-to-market, and the sensitivity analysis of such indices to changes in the organization parameters and user requirements. The approach uses a timed Petri Net and Object Oriented top-down model specification. Results demonstrate the model representativeness, and its usefulness in verifying process conformance to expectations, and in performing continuous process improvement and optimization.

  18. Sprint, agility, strength and endurance capacity in wheelchair basketball players

    PubMed Central

    Granados, C; Otero, M; Badiola, A; Olasagasti, J; Bidaurrazaga-Letona, I; Iturricastillo, A; Gil, SM

    2014-01-01

    The aims of the present study were, firstly, to determine the reliability and reproducibility of an agility T-test and Yo-Yo 10 m recovery test; and secondly, to analyse the physical characteristics measured by sprint, agility, strength and endurance field tests in wheelchair basketball (WB) players. 16 WB players (33.06 ± 7.36 years, 71.89 ± 21.71 kg and sitting body height 86.07 ± 6.82 cm) belonging to the national WB league participated in this study. Wheelchair sprint (5 and 20 m without ball, and 5 and 20 m with ball) agility (T-test and pick-up test) strength (handgrip and maximal pass) and endurance (Yo-Yo 10 m recovery test) were performed. T-test and Yo-Yo 10 m recovery test showed good reproducibility values (intraclass correlation coefficient, ICC = 0.74-0.94). The WB players’ results in 5 and 20 m sprints without a ball were 1.87 ± 0.21 s and 5.70 ± 0.43 s and with a ball 2.10 ± 0.30 s and 6.59 ± 0.61 s, being better than those reported in the literature. Regarding the pick-up test results (16.05 ± 0.52 s) and maximal pass (8.39 ± 1.77 m), players showed worse values than those obtained in elite players. The main contribution of the present study is the characterization of the physical performance profile of WB players using a field test battery. Furthermore, we demonstrated that the agility T-test and the aerobic Yo-Yo 10 m recovery test are reliable; consequently they may be appropriate instruments for measuring physical fitness in WB. PMID:25729153

  19. AGILE detection of a flare from PKS 1510-089

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Tavani, M.; Fioretti, V.; Gianotti, F.; Trifoglio, M.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Vercellone, S.; Piano, G.; Donnarumma, I.; Striani, E.; Cardillo, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Colafrancesco, S.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Pacciani, L.; Soffitta, P.; Costa, E.; Lapshov, I.; Rapisarda, M.; Argan, A.; Pucella, G.; Sabatini, S.; Trois, A.; Vittorini, V.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Di Cocco, G.; Pellizzoni, A.; Pilia, M.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Giommi, P.; Salotti, L.; Valentini, G.

    2014-08-01

    AGILE is now detecting transient gamma-ray emission above 100 MeV from a source positionally consistent with PKS 1510-089. Integrating from 2014-07-31 00:43 UT to 2014-08-02 02:15 UT, a preliminary maximum likelihood analysis yields a detection above 100 MeV positioned at Galactic coordinates (l,b) = (350.96, 40.12) +/- 0.9 (stat.) +/- 0.1 (syst.).

  20. AGILE Observations of the Gravitational-wave Event GW150914

    NASA Astrophysics Data System (ADS)

    Tavani, M.; Pittori, C.; Verrecchia, F.; Bulgarelli, A.; Giuliani, A.; Donnarumma, I.; Argan, A.; Trois, A.; Lucarelli, F.; Marisaldi, M.; Del Monte, E.; Evangelista, Y.; Fioretti, V.; Zoli, A.; Piano, G.; Munar-Adrover, P.; Antonelli, L. A.; Barbiellini, G.; Caraveo, P.; Cattaneo, P. W.; Costa, E.; Feroci, M.; Ferrari, A.; Longo, F.; Mereghetti, S.; Minervini, G.; Morselli, A.; Pacciani, L.; Pellizzoni, A.; Picozza, P.; Pilia, M.; Rappoldi, A.; Sabatini, S.; Vercellone, S.; Vittorini, V.; Giommi, P.; Colafrancesco, S.; Cardillo, M.; Galli, M.; Fuschino, F.

    2016-07-01

    We report the results of an extensive search through the AGILE data for a gamma-ray counterpart to the LIGO gravitational-wave (GW) event GW150914. Currently in spinning mode, AGILE has the potential of cover 80% of the sky with its gamma-ray instrument, more than 100 times a day. It turns out that AGILE came within a minute of the event time of observing the accessible GW150914 localization region. Interestingly, the gamma-ray detector exposed ∼65% of this region during the 100 s time intervals centered at ‑100 and +300 s from the event time. We determine a 2σ flux upper limit in the band 50 MeV–10 GeV, UL = 1.9 × 10‑8 erg cm‑2 s‑1, obtained ∼300 s after the event. The timing of this measurement is the fastest ever obtained for GW150914, and significantly constrains the electromagnetic emission of a possible high-energy counterpart. We also carried out a search for a gamma-ray precursor and delayed emission over five timescales ranging from minutes to days: in particular, we obtained an optimal exposure during the interval ‑150/‑30 s. In all these observations, we do not detect a significant signal associated with GW150914. We do not reveal the weak transient source reported by Fermi-GBM 0.4 s after the event time. However, even though a gamma-ray counterpart of the GW150914 event was not detected, the prospects for future AGILE observations of GW sources are decidedly promising.

  1. In-flight simulation of high agility through active control: Taming complexity by design

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Bradley, Roy

    1993-01-01

    The motivation for research into helicopter agility stems from the realization that marked improvements relative to current operational types are possible, yet there is a dearth of useful criteria for flying qualities at high performance levels. Several research laboratories are currently investing resources in developing second generation airborne rotorcraft simulators. The UK's focus has been the exploitation of agility through active control technology (ACT); this paper reviews the results of studies conducted to date. The conflict between safety and performance in flight research is highlighted and the various forms of safety net to protect against system failures are described. The role of the safety pilot, and the use of actuator and flight envelope limiting are discussed. It is argued that the deep complexity of a research ACT system can only be tamed through a requirement specification assembled using design principles and cast in an operational simulation form. Work along these lines conducted at DRA is described, including the use of the Jackson System Development method and associated Ada simulation.

  2. Agile Science Operations: A New Approach for Primitive Exploration Bodies

    NASA Technical Reports Server (NTRS)

    Chien, Steve A.; Thompson, David R.; Castillo-Rogez, Julie C.; Doyle, Richard; Estlin, Tara; Mclaren, David

    2012-01-01

    Primitive body exploration missions such as potential Comet Surface Sample Return or Trojan Tour and Rendezvous would challenge traditional operations practices. Earth-based observations would provide only basic understanding before arrival and many science goals would be defined during the initial rendezvous. It could be necessary to revise trajectories and observation plans to quickly characterize the target for safe, effective observations. Detection of outgassing activity and monitoring of comet surface activity are even more time constrained, with events occurring faster than round-trip light time. "Agile science operations" address these challenges with contingency plans that recognize the intrinsic uncertainty in the operating environment and science objectives. Planning for multiple alternatives can significantly improve the time required to repair and validate spacecraft command sequences. When appropriate, time-critical decisions can be automated and shifted to the spacecraft for immediate access to instrument data. Mirrored planning systems on both sides of the light-time gap permit transfer of authority back and forth as needed. We survey relevant science objectives, identifying time bottlenecks and the techniques that could be used to speed missions' reaction to new science data. Finally, we discuss the results of a trade study simulating agile observations during flyby and comet rendezvous scenarios. These experiments quantify instrument coverage of key surface features as a function of planning turnaround time. Careful application of agile operations techniques can play a significant role in realizing the Decadal Survey plan for primitive body exploration

  3. Clustering-based urbanisation to improve enterprise information systems agility

    NASA Astrophysics Data System (ADS)

    Imache, Rabah; Izza, Said; Ahmed-Nacer, Mohamed

    2015-11-01

    Enterprises are daily facing pressures to demonstrate their ability to adapt quickly to the unpredictable changes of their dynamic in terms of technology, social, legislative, competitiveness and globalisation. Thus, to ensure its place in this hard context, enterprise must always be agile and must ensure its sustainability by a continuous improvement of its information system (IS). Therefore, the agility of enterprise information systems (EISs) can be considered today as a primary objective of any enterprise. One way of achieving this objective is by the urbanisation of the EIS in the context of continuous improvement to make it a real asset servicing enterprise strategy. This paper investigates the benefits of EISs urbanisation based on clustering techniques as a driver for agility production and/or improvement to help managers and IT management departments to improve continuously the performance of the enterprise and make appropriate decisions in the scope of the enterprise objectives and strategy. This approach is applied to the urbanisation of a tour operator EIS.

  4. Observing peculiar γ-ray pulsars with AGILE

    NASA Astrophysics Data System (ADS)

    Pilia, M.; Pellizzoni, A.

    2011-08-01

    The AGILE γ-ray satellite provides large sky exposure levels (>=109 cm2 s per year on the Galactic Plane) with sensitivity peaking at E ~100 MeV where the bulk of pulsar energy output is typically released. Its ~1 μs absolute time tagging capability makes it perfectly suited for the study of γ-ray pulsars. AGILE collected a large number of γ-ray photons from EGRET pulsars (>=40,000 pulsed counts for Vela) in two years of observations unveiling new interesting features at sub-millisecond level in the pulsars' high-energy light-curves, γ-ray emission from pulsar glitches and Pulsar Wind Nebulae. AGILE detected about 20 nearby and energetic pulsars with good confidence through timing and/or spatial analysis. Among the newcomers we find pulsars with very high rotational energy losses, such as the remarkable PSR B1509-58 with a magnetic field in excess of 1013 Gauss, and PSR J2229+6114 providing a reliable identification for the previously unidentified EGRET source 3EG2227+6122. Moreover, the powerful millisecond pulsar B1821-24, in the globular cluster M28, is detected during a fraction of the observations.

  5. Effect of fence height on joint angles of agility dogs.

    PubMed

    Birch, Emily; Leśniak, Kirsty

    2013-12-01

    The Kennel Club (KC) and United Kingdom Agility (UKA) govern major dog agility competitions in the UK. Dogs are categorised into different jump heights depending on their height at the withers, with fence heights ranging from 300 to 650 mm for both organisations. Dogs fall into one of three height categories when competing under KC rules and one of four height categories under UKA rules. The aim of this study was to investigate the influence of an additional height category for agility dogs measuring over 430 mm at the withers. Jump heights were selected that related to the percentage of body height that dogs of 430 mm (7% lower) and 431 mm (51% higher) height at the withers would be encouraged to jump under UKA regulations without the addition of their fourth ('standard height') category. Joint angles were determined from anatomical markers placed on the forelimb and hind limb joints, and at six points along the vertebral column. As fence height increased, flexion of the scapulohumeral joint increased significantly for both the take-off and bascule (arc) phases of the jump. The increase in flexion as a consequence of the increase in fence height is likely to result in intensified stretching of the biceps brachii and supraspinatus muscles. In addition, increasing fence high resulted in an increase in the sacroiliac joint angle during take-off. PMID:24360736

  6. School Site Staff Development: Structures and Processes.

    ERIC Educational Resources Information Center

    Solo, Leonard J.

    1985-01-01

    Analyzes the importance of staff development (broadly defined as anything that enables teachers to learn) and considers different development structures. Describes the role and duties of staff developer at a Cambridge, Massachusetts, elementary school as well as its "teacher teams," groups of instructors who meet monthly to discuss issues…

  7. Between Oais and Agile a Dynamic Data Management Approach

    NASA Astrophysics Data System (ADS)

    Bennett, V. L.; Conway, E. A.; Waterfall, A. M.; Pepler, S.

    2015-12-01

    In this paper we decribe an approach to the integration of existing archival activities which lies between compliance with the more rigid OAIS/TRAC standards and a more flexible "Agile" approach to the curation and preservation of Earth Observation data. We provide a high level overview of existing practice and discuss how these procedures can be extended and supported through the description of preservation state. The aim of which is to facilitate the dynamic controlled management of scientific data through its lifecycle. While processes are considered they are not statically defined but rather driven by human interactions in the form of risk management/review procedure that produce actionable plans, which are responsive to change. We then proceed by describing the feasibility testing of extended risk management and planning procedures which integrate current practices. This was done through the CEDA Archival Format Audit which inspected British Atmospheric Data Centre and NERC Earth Observation Data Centre Archival holdings. These holdings are extensive, comprising of around 2 Petabytes of data and 137 million individual files, which were analysed and characterised in terms of format, based risk. We are then able to present an overview of the format based risk burden faced by a large scale archive attempting to maintain the usability of heterogeneous environmental data sets We continue by presenting a dynamic data management information model and provide discussion of the following core model entities and their relationships: Aspirational entities, which include Data Entity definitions and their associated Preservation Objectives. Risk entities, which act as drivers for change within the data lifecycle. These include Acquisitional Risks, Technical Risks, Strategic Risks and External Risks Plan entities, which detail the actions to bring about change within an archive. These include Acquisition Plans, Preservation Plans and Monitoring plans which support

  8. Oil shale fines process developments in Brazil

    SciTech Connect

    Lisboa, A.C.; Nowicki, R.E. ); Piper, E.M. )

    1989-01-01

    The Petrobras oil shale retorting process, utilizes the particle range of +1/4 inch - 3 1/2 inches. The UPI plant in Sao Mateus do Sul has over 106,000 hours of operation, has processed over 6,200,000 metric tons of shale and has produced almost 3,000,000 barrels of shale oil. However, the nature of the raw oil shale is such that the amount of shale less than 1/4 inch that is mined and crushed and returned to the mine site is about 20 percent, thereby, increasing the cost of oil produced by a substantial number. Petrobras has investigated several systems to process the fines that are not handled by the 65 MTPH UPI plant and the 260 MTPH commercial plant. This paper provides an updated status of each of these processes in regard to the tests performed, potential contributions to an integrated use of the oil shale mine, and future considerations.

  9. High-Speed Time-Series CCD Photometry with Agile

    NASA Astrophysics Data System (ADS)

    Mukadam, Anjum S.; Owen, R.; Mannery, E.; MacDonald, N.; Williams, B.; Stauffer, F.; Miller, C.

    2011-12-01

    We have assembled a high-speed time-series CCD photometer named Agile for the 3.5 m telescope at Apache Point Observatory, based on the design of a photometer called Argos at McDonald Observatory. Instead of a mechanical shutter, we use the frame-transfer operation of the CCD to end an exposure and initiate the subsequent new exposure. The frame-transfer operation is triggered by the negative edge of a GPS pulse; the instrument timing is controlled directly by hardware, without any software intervention or delays. This is the central pillar in the design of Argos that we have also used in Agile; this feature makes the accuracy of instrument timing better than a millisecond. Agile is based on a Princeton Instruments Acton VersArray camera with a frame-transfer CCD, which has 1K × 1K active pixels, each of size 13 μm × 13 μm. Using a focal reducer at the Nasmyth focus of the 3.5 m telescope at Apache Point Observatory, we yield a field of view of 2.2 × 2.2 arcmin2 with an unbinned plate scale of 0.13'' pixel-1. The CCD is back-illuminated and thinned for improved blue sensitivity and provides a quantum efficiency >=80% in the wavelength range of 4500-7500 Å. The unbinned full-frame readout time can be as fast as 1.1 s this is achieved using a low-noise amplifier operating at 1 MHz with an average read noise of the order of 6.6 e rms. At the slow read rate of 100 kHz to be used for exposure times longer than a few seconds, we determine an average read noise of the order of 3.7 e rms. Agile is optimized to observe variability at short timescales from one-third of a second to several hundred seconds. The variable astronomical sources routinely observed with Agile include pulsating white dwarfs, cataclysmic variables, flare stars, planetary transits, and planetary satellite occultations.

  10. A real time pipeline to link meteorological information and TGFs detected by AGILE

    NASA Astrophysics Data System (ADS)

    Ursi, Alessandro; Tavani, Marco; Dietrich, Stefano; Marisaldi, Martino; Casella, Daniele; Sanò, Paolo; Petracca, Marco; Argan, Andrea

    2015-04-01

    Terrestrial Gamma-ray Flashes (TGFs) are brief (AGILE mission turns out to be particularly suitable to detect TGFs, because of its very wide energy range (up to 100 MeV and beyond), its optimized triggering system and its equatorial orbit. We describe a new alert service that has been developed for the AGILE satellite, whose aim is to provide "real time" meteorological information about the detected TGFs. We take advantage of the Meteosat Second Generation (MSG) satellites data to promptly identify the possible individual thunderstorm or mesoscale convective system associated to the detected TGF event and to follow its evolution in space and time. Data from other meteorological satellites, for example the GPM mission, as well as ground measurements from lightning detection network, can be integrated in the pipeline. This allows us a prompt characterization of the ground meteorological conditions at TGF time which will provide instrument independent trigger validation, fill in a database for subsequent statistical analysis, and eventually, on a longer term perspective, serve as a real time alert system open to the community.

  11. The X-31 aircraft: Advances in aircraft agility and performance

    NASA Astrophysics Data System (ADS)

    Alcorn, C. W.; Croom, M. A.; Francis, M. S.; Ross, H.

    1996-08-01

    The X-31 enhanced fighter maneuverability (EFM) demonstrator has pioneered agile flight in the post-stall flight regime and explored integrated multi-axis thrust vectoring across a broad flight envelope. Its maneuvering achievements include sustained flight up to 70 degrees angle of attack, velocity vector rolls in deep post-stall conditions, and post-stall turns from high entry to exit speeds with ultra low turning/transitional conditions. The concept of post-stall maneuverability was extensively studied in simulations preceding initiation of the X-31 program. These simulations provided a baseline for tactical utility demonstrations and vehicle design requirements. Post-stall maneuverability was not achieved without encountering and mitigating the effects of highly unsteady, asymmetric, vortex-dominated flow-fields associated with post-stall flight. Anomalies in vehicle response to control inputs were observed at high angles of attack, as were differences between simulator and actual flight parameters due to a misrepresentation of the effects of these complex flowfields. Some preliminary force and moment data for the X-31 configuration during dynamic maneuvers are provided to highlight the complex nature of the flowfield. The X-31 aircraft's enabling capabilities, including multi-axis thrust vectoring and integrated flight/propulsion control also provided performance enhancements across the entire flight envelope. In what were known as ‘quasi-tailless’ experiments, conventional aerodynamic control surfaces were used to reduce or eliminate the stabilizing influence of the vertical stabilizer, while the vehicle's multi-axis thrust vectoring capability was used for restabilization. Properly exploited, these technologies can lead to the reduction or elimination of traditional aerodynamic control surfaces, which provides profound improvements in vehicle range, weight, payload, and low observability. This review focuses on some of the principal aerodynamic issues

  12. IMPROVING INDUSTRIAL WASTEWATER TREATMENT PROCESS RELIABILITY TO ENHANCE SUSTAINABLE DEVELOPMENT

    EPA Science Inventory

    Sustainable development includes the recovery of resources from industrial manufacturing processes. One valuable resource that can often be purified and reused is process wastewater. Typically, pollutants are removed from process wastewater using physical, chemical, and biologica...

  13. Laboratory Activities for Developing Process Skills.

    ERIC Educational Resources Information Center

    Institute for Services to Education, Inc., Washington, DC.

    This workbook contains laboratory exercises designed for use in a college introductory biology course. Each exercise helps the student develop a basic science skill. The exercises are arranged in a hierarchical sequence suggesting the scientific method. Each skill facilitates the development of succeeding ones. Activities include Use of the…

  14. Development of a solvent processed insensitive propellant

    NASA Technical Reports Server (NTRS)

    Trask, R.; Costa, E.; Beardell, A. J.

    1980-01-01

    Two types of low vulnerability propellants are studied which are distinguished by whether the binder is a rubber, such as polyurethane or CTBN, or a plasticizable polymer such as ethyl cellulose or cellulose acetate. The former propellants are made by a partial cure extrusion process while the latter are made by the conventional solvent process. Emphasis is given to a cellulose binder (plasticizer) RDX composition. The type of binder used, the particle size of the RDX and the presence of small quantities of nitrocellulose in the solvent processed compositions have important influences on the mechanical and combustion characteristics of the propellant. The low temperature combustion is of particular concern because of potential breakup of the grains that can lead to instability.

  15. Silicon EFG process development by multiscale modeling

    NASA Astrophysics Data System (ADS)

    Müller, M.; Birkmann, B.; Mosel, F.; Westram, I.; Seidl, A.

    2010-04-01

    An overview of simulation models in use for optimizing the edge-defined film-fed growth (EFG) process of thin-walled hollow silicon tubes at WACKER SCHOTT Solar is presented. The simulations span the length scales from complete furnace models over growth simulations with a mesoscopic description of the crystalline character of silicon down to solidification simulations with atomic resolution. Results gained from one model are used as input parameters or boundary conditions on other levels. Examples for the application of these models and their impact on process design are given. These include the reduction of tube thickness variations, the control of tube deformations, residual stresses and dislocation densities and the identification of twin formation processes typical for EFG silicon.

  16. The Agile Approach with Doctoral Dissertation Supervision

    ERIC Educational Resources Information Center

    Tengberg, Lars Göran Wallgren

    2015-01-01

    Several research findings conclude that many doctoral students fail to complete their studies within the allowable time frame, in part because of problems related to the research and supervision process. Surveys show that most doctoral students are generally satisfied with their dissertation supervision. However, these surveys also reveal some…

  17. The technology base for agile manufacturing

    NASA Technical Reports Server (NTRS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-01-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  18. The technology base for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-02-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  19. Relationship Between Reactive Agility and Change of Direction Speed in Amateur Soccer Players.

    PubMed

    Matlák, János; Tihanyi, József; Rácz, Levente

    2016-06-01

    Matlák, J, Tihanyi, J, and Rácz, L. Relationship between reactive agility and change of direction speed in amateur soccer players. J Strength Cond Res 30(6): 1547-1552, 2016-The aim of the study was to assess the relationship between reactive agility and change of direction speed (CODS) among amateur soccer players using running tests with four directional changes. Sixteen amateur soccer players (24.1 ± 3.3 years; 72.4 ± 7.3 kg; 178.7 ± 6 cm) completed CODS and reactive agility tests with four changes of direction using the SpeedCourt™ system (Globalspeed GmbH, Hemsbach, Germany). Countermovement jump (CMJ) height and maximal foot tapping count (completed in 3 seconds) were also measured with the same device. In the reactive agility test, participants had to react to a series of light stimuli projected onto a screen. Total time was shorter in the CODS test than in the reactive agility test (p < 0.001). Nonsignificant correlations were found among variables measured in the CODS, reactive agility, and CMJ tests. Low common variance (r = 0.03-0.18) was found between CODS and reactive agility test variables. The results of this study underscore the importance of cognitive factors in reactive agility performance and suggest that specific methods may be required for training and testing reactive agility and CODS. PMID:26562713

  20. Team-based work and work system balance in the context of agile manufacturing.

    PubMed

    Yauch, Charlene A

    2007-01-01

    Manufacturing agility is the ability to prosper in an environment characterized by constant and unpredictable change. The purpose of this paper is to analyze team attributes necessary to facilitate agile manufacturing, and using Balance Theory as a framework, it evaluates the potential positive and negative impacts related to these team attributes that could alter the balance of work system elements and resulting "stress load" experienced by persons working on agile teams. Teams operating within the context of agile manufacturing are characterized as multifunctional, dynamic, cooperative, and virtual. A review of the literature relevant to each of these attributes is provided, as well as suggestions for future research. PMID:16631101

  1. Developing Evaluation Capacity through Process Use

    ERIC Educational Resources Information Center

    King, Jean A.

    2007-01-01

    This article discusses how to make process use an independent variable in evaluation practice: the purposeful means of building an organization's capacity to conduct and use evaluations in the long run. The goal of evaluation capacity building (ECB) is to strengthen and sustain effective program evaluation practices through a number of activities:…

  2. The Development of Face Processing in Autism

    ERIC Educational Resources Information Center

    Sasson, Noah J.

    2006-01-01

    Both behavioral and neuroimaging evidence indicate that individuals with autism demonstrate marked abnormalities in the processing of faces. These abnormalities are often explained as either the result of an innate impairment to specialized neural systems or as a secondary consequence of reduced levels of social interest. A review of the…

  3. Gully development processes in the Ethiopian Highlands

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Gully erosion is an important soil degradation process in a range of environments, causing considerable soil losses and producing large volumes of sediment. In Ethiopia, gully erosion is a major problem expanding at alarming rate and devastating cultivated and grazing lands. The objective of the stu...

  4. The Development of Symbol Processing Abilities.

    ERIC Educational Resources Information Center

    Farnham-Diggory, Sylvia

    Visual and auditory stimuli were presented to children to measure symbol processing abilities. Slides which required matching the similarities in two objects in a group of three were presented. At times the matching criteria varied between function, color, and form. Reaction time was quicker when matching by color than by function, which was…

  5. Effects of an over-the-counter vented mouthguard on cardiorespiratory responses to exercise and physical agility.

    PubMed

    Bailey, Stephen P; Willauer, Thomas J; Balilionis, Gytis; Wilson, Laura E; Salley, John T; Bailey, Elizabeth K; Strickland, Tony L

    2015-03-01

    Many athletes avoid using mouthguards because they believe that they impair their ability to breath and negatively affect performance. Recently, some manufacturers have developed "vented" mouthguards (VentMGs) to address this concern. The purposes of this investigation were to describe the impact of a commercially available "vented" boil-and-bite mouthguard on the physiological responses to graded exercise and to determine whether the use of the same mouthguard influences performance during traditional physical agility tests. Recreationally trained males (n = 15) (age = 24 ± 1 year; (Equation is included in full-text article.)= 43.5 ± 1.9 ml·kg·min; body mass index = 25.2 ± 0.9) completed 3 randomly assigned trials where they wore no mouthguard (control), a traditional mouthguard (TradMG), or a VentMG. During each trial, subjects completed a modified maximal exercise test on a cycle ergometer and a series of physical agility tests (40-m dash, vertical leap, broad jump, 3-cone drill, and shuttle run). No differences were seen between control and the TradMG in any cardiorespiratory measures at any time during the maximal exercise test. Ventilation and blood lactate were lower (p ≤ 0.05) during VentMG at 200 W and at MAX; however, no differences in (Equation is included in full-text article.)were observed. Although TradMG had no impact on physical agility, VentMG produced a higher (1.9 cm; p = 0.03) vertical leap than control. Both mouthguard conditions negatively affected perceptions of breathability, comfort, and ability to communicate, but no differences existed between the 2 conditions. These findings confirm that TradMG has no negative impact on physiological function during exercise and physical agility; however, VentMG may have a positive impact at higher workload and on vertical leap. PMID:25264671

  6. Computational Tools for Accelerating Carbon Capture Process Development

    SciTech Connect

    Miller, David; Sahinidis, N V; Cozad, A; Lee, A; Kim, H; Morinelly, J; Eslick, J; Yuan, Z

    2013-06-04

    This presentation reports development of advanced computational tools to accelerate next generation technology development. These tools are to develop an optimized process using rigorous models. They include: Process Models; Simulation-Based Optimization; Optimized Process; Uncertainty Quantification; Algebraic Surrogate Models; and Superstructure Optimization (Determine Configuration).

  7. USING GREEN CHEMISTRY TO INFLUENCE PROCESS DEVELOPMENT

    EPA Science Inventory

    The twelve principles of green chemistry by Anastas and Warner provide the researcher with a foundation or pathway which allows opportunities to incorporate greenness into an existing reaction or when developing alternative technologies. The twelve additional principles of green ...

  8. How rolling forecasting facilitates dynamic, agile planning.

    PubMed

    Miller, Debra; Allen, Michael; Schnittger, Stephanie; Hackman, Theresa

    2013-11-01

    Rolling forecasting may be used to replace or supplement the annual budget process. The rolling forecast typically builds on the organization's strategic financial plan, focusing on the first three years of plan projections and comparing the strategic financial plan assumptions with the organization's expected trajectory. Leaders can then identify and respond to gaps between the rolling forecast and the strategic financial plan on an ongoing basis. PMID:24340653

  9. Failure-tolerant control for small agile satellites using single-gimbal control moment gyros and magnetic torquers

    NASA Astrophysics Data System (ADS)

    Meng, Tao; Matunaga, Saburo

    2012-04-01

    This paper focuses on the attitude control problem of small agile satellites using single-gimbal control moment gyros (CMG) and magnetic torquers (MTQ). CMGs are regarded as effective torque generators for agile satellites because of their torque amplification capability. However, they are vulnerable to failure due to their complex inner mechanism. In this paper, different failure cases of CMGs are analyzed. A flexible failure-tolerant control strategy is developed by automatically redistributing the required control torque among the operating CMGs and MTQs, with a variable limiter to accommodate the actuator dynamics changes introduced by CMG failures. The performances of maneuvers about different directions under different failure cases are also discussed and examined. Numerical simulations demonstrate that the proposed strategy maintains certain agility in the cases of one or two CMGs failing. Moreover, a survival strategy with only one CMG left is also verified. Both sun-pointing stabilization and earth-pointing stabilization can be achieved in this case, which fulfill some basic mission requirements.

  10. Analysis of global Terrestrial Gamma Ray Flashes distribution and special focus on AGILE detections over South America

    NASA Astrophysics Data System (ADS)

    Fabró, Ferran; Montanyà, Joan; Marisaldi, Martino; van der Velde, Oscar A.; Fuschino, Fabio

    2015-03-01

    Global distribution of the Terrestrial Gamma-ray Flashes (TGFs) detected by AGILE and RHESSI for the period from March 2009 to July 2012 has been analysed. A fourth TGF production region has been distinguished over the Pacific. It is confirmed that TGF occurrence follows the Intertropical Convergence Zone (ITCZ) seasonal migration and prefers afternoons. TGF/lightning ratio appears to be lower over America than other regions suggesting that meteorological regional differences are important for the TGF production. Diurnal cycle of TGFs peaks in the afternoon suggesting that Convective Available Potential Energy (CAPE) and convection are important for TGF production. Moreover all AGILE passages over South America in the same period have been analysed to find meteorological preferences for TGF occurrence. In each passage the analysis of Cloud Top Altitude (CTA), CAPE, number of strokes, number of storms and coverage area of clouds with temperatures below -70 °C (Cloud Top Coverage area, CTC) are computed. On average, AGILE has been exposed to 19,100 strokes between each TGF representing ∼68 h of exposure over active storms. High CAPE values, high cloud tops and high stroke occurrence suggest that meteorological conditions conducive to vigorous and electrically active storms are important for TGF production. It is shown that a high number of thunderstorms is preferable for TGF production which may be explained by a greater chance of the presence of a thunderstorm in the best development stage for TGF production. High tropopause altitude seems to be important but not primordial for TGF production.

  11. Developments in pharmacists' disciplinary processes and outcomes.

    PubMed

    Hattingh, Laetitia; Smith, Nerida; Searle, Judy; Forrester, Kim

    2008-08-01

    Pharmacy disciplinary processes and outcomes protect consumers by deterring pharmacists from unacceptable practices and maintaining the reputation and standing of the pharmacy profession. It is important that pharmacists are informed of disciplinary processes and outcomes in order to predict what is regarded as unacceptable behaviour and the potential consequences thereof. Disciplinary procedures and outcomes also play an important role in maintaining public trust in the pharmacy profession and it is therefore important that the public has confidence in the disciplinary structure. The outcomes of pharmacy disciplinary cases that reflect the patient care role of pharmacists are particularly important in helping to determine pharmacists' changed professional responsibility and potential legal liability in the provision of these patient care services. PMID:18807799

  12. Unsteady aerodynamic models for agile flight at low Reynolds numbers

    NASA Astrophysics Data System (ADS)

    Brunton, Steven L.

    This work develops low-order models for the unsteady aerodynamic forces on a wing in response to agile maneuvers at low Reynolds number. Model performance is assessed on the basis of accuracy across a range of parameters and frequencies as well as of computational efficiency and compatibility with existing control techniques and flight dynamic models. The result is a flexible modeling procedure that yields accurate, low-dimensional, state-space models. The modeling procedures are developed and tested on direct numerical simulations of a two-dimensional flat plate airfoil in motion at low Reynolds number, Re=100, and in a wind tunnel experiment at the Illinois Institute of Technology involving a NACA 0006 airfoil pitching and plunging at Reynolds number Re=65,000. In both instances, low-order models are obtained that accurately capture the unsteady aerodynamic forces at all frequencies. These cases demonstrate the utility of the modeling procedure developed in this thesis for obtaining accurate models for different geometries and Reynolds numbers. Linear reduced-order models are constructed from either the indicial response (step response) or realistic input/output maneuvers using a flexible modeling procedure. The method is based on identifying stability derivatives and modeling the remaining dynamics with the eigensystem realization algorithm. A hierarchy of models is developed, based on linearizing the flow at various operating conditions. These models are shown to be accurate and efficient for plunging, pitching about various points, and combined pitch and plunge maneuvers, at various angle of attack and Reynolds number. Models are compared against the classical unsteady aerodynamic models of Wagner and Theodorsen over a large range of Strouhal number and reduced frequency for a baseline comparison. Additionally, state-space representations are developed for Wagner's and Theodorsen's models, making them compatible with modern control-system analysis. A number of

  13. Development of enhanced sulfur rejection processes

    SciTech Connect

    Yoon, R.H.; Luttrell, G.; Adel, G.; Richardson, P.E.

    1993-03-23

    Research at Virginia Tech led to two complementary concepts for improving the removal of inorganic sulfur from much of the Eastern US coals. One controls the surface properties of coal pyrite (FeS[sub 2]) by electrochemical-.potential control, referred to as the Electrochemically Enhanced Sulfur Rejection (EESR) Process: The second controls the flotation of middlings, i.e., particles composed of pyrite with coal inclusions by using polymeric reagents to react with pyrite and convert the middlings to hydrophilic particles, and is termed the Polymer Enhanced Sulfur Rejection (PESR) Process. These new concepts are based on recent research establishing the two main reasons why flotation fails to remove more than about 50% of the pyritic sulfur from coal: superficial oxidization of liberated pyrite to form polysulfide oxidation products so that a part of the liberated pyrite floats with the coal; and hydrophobic coal inclusions in the middlings dominating their flotation so that the middlings also float with the coal. These new pyritic-sulfur rejection processes do not require significant modifications of existing coal preparation facilities, enhancing their adoptability by the coal industry. It is believed that they can be used simultaneously to achieve both free pyrite and locked pyrite rejection.

  14. Nondestructive evaluation development for process control

    SciTech Connect

    Ellingson, W.A.; Holloway, D.L.; Sivers, E.A. ); Ling, J. . Inst. for Ceramics); Pollinger, J.P.; Yeh, H.C. . Garrett Ceramic Components Div.)

    1991-01-01

    A joint project between Garrett Ceramic Components (GCC) of Allied Signal Aerospace Corporation and Argonne National Laboratory (ANL) is ongoing to evaluate nondestructive characterization (NDC) methods to detect and measure process-induced variations in ceramic materials. The process methods of current focus on slip-casting and injection molding and the NDC methods being evaluated are microfocus X-ray computed tomography (XCT) and nuclear magnetic resonance computed tomography (MRCT). As part of this work, SiC whisker reinforced Si{sub 3}N{sub 4} (GCC's GN-10 material) has been pressure slip-cast at two casting pressures, 15 and 40 psi; and at length/diameter ratios of 1.5, 2.5 and 3.0 with whisker contents of 20, 23, 27 and 30 wt %. Three-dimensional microfocus XCT has been used to study density variations in billets produced by different process conditions. Destructive measurement of density variation has been compared to the XCT measurements and correlations established. XCT has been shown to be able to detect <5% variations in as-cast density and these were destructively verified.

  15. Nondestructive evaluation development for process control

    SciTech Connect

    Ellingson, W.A.; Holloway, D.L.; Sivers, E.A.; Ling, J.; Pollinger, J.P.; Yeh, H.C.

    1991-12-31

    A joint project between Garrett Ceramic Components (GCC) of Allied Signal Aerospace Corporation and Argonne National Laboratory (ANL) is ongoing to evaluate nondestructive characterization (NDC) methods to detect and measure process-induced variations in ceramic materials. The process methods of current focus on slip-casting and injection molding and the NDC methods being evaluated are microfocus X-ray computed tomography (XCT) and nuclear magnetic resonance computed tomography (MRCT). As part of this work, SiC whisker reinforced Si{sub 3}N{sub 4} (GCC`s GN-10 material) has been pressure slip-cast at two casting pressures, 15 and 40 psi; and at length/diameter ratios of 1.5, 2.5 and 3.0 with whisker contents of 20, 23, 27 and 30 wt %. Three-dimensional microfocus XCT has been used to study density variations in billets produced by different process conditions. Destructive measurement of density variation has been compared to the XCT measurements and correlations established. XCT has been shown to be able to detect <5% variations in as-cast density and these were destructively verified.

  16. Linking data repositories - an illustration of agile data curation principles through robust documentation and multiple application programming interfaces

    NASA Astrophysics Data System (ADS)

    Benedict, K. K.; Servilla, M. S.; Vanderbilt, K.; Wheeler, J.

    2015-12-01

    The growing volume, variety and velocity of production of Earth science data magnifies the impact of inefficiencies in data acquisition, processing, analysis, and sharing workflows, potentially to the point of impairing the ability of researchers to accomplish their desired scientific objectives. The adaptation of agile software development principles (http://agilemanifesto.org/principles.html) to data curation processes has significant potential to lower barriers to effective scientific data discovery and reuse - barriers that otherwise may force the development of new data to replace existing but unusable data, or require substantial effort to make data usable in new research contexts. This paper outlines a data curation process that was developed at the University of New Mexico that provides a cross-walk of data and associated documentation between the data archive developed by the Long Term Ecological Research (LTER) Network Office (PASTA - http://lno.lternet.edu/content/network-information-system) and UNM's institutional repository (LoboVault - http://repository.unm.edu). The developed automated workflow enables the replication of versioned data objects and their associated standards-based metadata between the LTER system and LoboVault - providing long-term preservation for those data/metadata packages within LoboVault while maintaining the value-added services that the PASTA platform provides. The relative ease with which this workflow was developed is a product of the capabilities independently developed on both platforms - including the simplicity of providing a well-documented application programming interface (API) for each platform enabling scripted interaction and the use of well-established documentation standards (EML in the case of PASTA, Dublin Core in the case of LoboVault) by both systems. These system characteristics, when combined with an iterative process of interaction between the Data Curation Librarian (on the LoboVault side of the process

  17. Organizational Leadership Process for University Education

    ERIC Educational Resources Information Center

    Llamosa-Villalba, Ricardo; Delgado, Dario J.; Camacho, Heidi P.; Paéz, Ana M.; Valdivieso, Raúl F.

    2014-01-01

    This paper relates the "Agile School", an emerging archetype of the enterprise architecture: "Processes of Organizational Leadership" for leading and managing strategies, tactics and operations of forming in Higher Education Institutions. Agile School is a system for innovation and deep transformation of University Institutions…

  18. Collection Development as a Social Process.

    ERIC Educational Resources Information Center

    Lee, Hur-Li

    2003-01-01

    This case study examines social influences in research libraries' collection development. It shows that individuals' ideologies and political agenda shape their impression of user needs and their decision making. The study also reveals how the institution's operating structures, campus politics of interdisciplinarity, personnel deployment, and…

  19. Group Process and Adolescent Leadership Development.

    ERIC Educational Resources Information Center

    Hohmann, Mary; And Others

    1982-01-01

    Describes an approach to leadership development which is particularly supportive of the needs of adolescents and reflective of a democratic style of leadership. It is an outgrowth of the High/Scope Summer Workshop for Teenagers, which helped young people acquire leadership skills through group membership and cooperation. (Author)

  20. Robot welding process control development task

    NASA Technical Reports Server (NTRS)

    Romine, Peter L.

    1992-01-01

    The completion of, and improvements made to, the software developed during 1990 for program maintenance on the PC and HEURIKON and transfer to the CYRO, and integration of the Rocketdyne vision software with the CYRO is documented. The new programs were used successfully by NASA, Rocketdyne, and UAH technicians and engineers to create, modify, upload, download, and control CYRO NC programs.

  1. Interrogating inclusive development in India's transition process.

    PubMed

    Chakrabarti, Anjan; Dhar, Anup

    2012-12-01

    This paper makes two related contributions. First, the dual economic structure underlying development is shown as producing a distinct conception of other comprising of a devalued third world which is foregrounded and world of the third which is excluded. This dyad of inclusion-exclusion of other is produced in relation to the centers of capitalism and modernism. The category of third world helps to displace the language-experience-logic-ethos of the other a la world of the third such that development works over and transforms world of the third, but via the trope of a devalued third world. We then use this framework to explore the relation of global capitalism with world of the third in the Indian context, a relation that is shown to be two fold. There is on one hand an attempt to dismantle world of the third as part of the development trope of overcoming the third world. On the other, through inclusive development, an attempt is made to directly intervene in the economy of world of the third so as to address the problems of income inequality and social exclusion, again under the trope of uplifting the devalued third world. PMID:23390797

  2. OSTA/ADS standards development process

    NASA Technical Reports Server (NTRS)

    Walton, B.

    1981-01-01

    A phased approach to data systems standards was developed. The standards survey, user requirements, methodology survey, and evaluation criteria were completed. Remaining to be done are data system planning interim standards, a concept for implementation of a core applications data service, a data systems policy definition, and full capability data services definition.

  3. Development of the NEXT Power Processing Unit

    NASA Technical Reports Server (NTRS)

    Phelps, Thomas K.; Wiseman, Steve; Komm, David S.; Bond, Thomas; Pinero, Luis R.

    2005-01-01

    Boeing Electron Dynamic Devices, Inc. (EDD) has designed and fabricated a breadboard version of a 6 kW power processing unit (PPU) for gridded ion thrusters. This breadboard PPU will be integrated with an engineering model 40 cm ion engine designed and tested at NASA Glenn. The results of our tests using resistive loads are reported in this paper. The PPU demonstrated efficiencies to date are higher than 95 percent for the beam supply and higher than 92 percent for the discharge supply at full power. Overall PPU efficiency is greater than 94 percent at full throttle settings.

  4. 21 CFR 861.20 - Summary of standards development process.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Summary of standards development process. 861.20... (CONTINUED) MEDICAL DEVICES PROCEDURES FOR PERFORMANCE STANDARDS DEVELOPMENT Procedures for Performance Standards Development and Publication § 861.20 Summary of standards development process. The procedure...

  5. Materials processing apparatus development for fluoride glass

    NASA Technical Reports Server (NTRS)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  6. Relationships Between Reactive Agility Movement Time and Unilateral Vertical, Horizontal, and Lateral Jumps.

    PubMed

    Henry, Greg J; Dawson, Brian; Lay, Brendan S; Young, Warren B

    2016-09-01

    Henry, GJ, Dawson, B, Lay, BS, and Young, WB. Relationships between reactive agility movement time and unilateral vertical, horizontal, and lateral jumps. J Strength Cond Res 30(9): 2514-2521, 2016-This study compared reactive agility movement time and unilateral (vertical, horizontal, and lateral) jump performance and kinetics between dominant and nondominant legs in Australian rules footballers (n = 31) to investigate the role of leg strength characteristics in reactive agility performance. Jumps involved jumping forward on 1 leg, then for maximum height or horizontal or lateral distance. Agility and movement time components of reactive agility were assessed using a video-based test. Correlations between each of the jumps were strong (r = -0.62 to -0.77), but between the jumps and agility movement time the relationships were weak (r = -0.25 to -0.33). Dominant leg performance was superior in reactive agility movement time (4.5%; p = 0.04), lateral jump distance (3%; p = 0.008), and lateral reactive strength index (4.4%; p = 0.03) compared with the nondominant leg. However, when the subjects were divided into faster and slower performers (based on their agility movement times) the movement time was significantly quicker in the faster group (n = 15; 12%; p < 0.001), but no differences in jump performance or kinetics were observed. Therefore, although the capacity for jumps to predict agility performance seems limited, factors involved in producing superior lateral jump performance in the dominant leg may also be associated with advantages in agility performance in that leg. However, because reactive strength as measured by unilateral jumps seems to play a limited role in reactive agility performance and other factors such as skill, balance, and coordination, and also cognitive and decision-making factors, are likely to be more important. PMID:23820562

  7. A multiarchitecture parallel-processing development environment

    NASA Technical Reports Server (NTRS)

    Townsend, Scott; Blech, Richard; Cole, Gary

    1993-01-01

    A description is given of the hardware and software of a multiprocessor test bed - the second generation Hypercluster system. The Hypercluster architecture consists of a standard hypercube distributed-memory topology, with multiprocessor shared-memory nodes. By using standard, off-the-shelf hardware, the system can be upgraded to use rapidly improving computer technology. The Hypercluster's multiarchitecture nature makes it suitable for researching parallel algorithms in computational field simulation applications (e.g., computational fluid dynamics). The dedicated test-bed environment of the Hypercluster and its custom-built software allows experiments with various parallel-processing concepts such as message passing algorithms, debugging tools, and computational 'steering'. Such research would be difficult, if not impossible, to achieve on shared, commercial systems.

  8. Silicon web process development. Annual report

    SciTech Connect

    Duncan, C.S.; Seidensticker, R.G.; McHugh, J.P.; Hill, F.E.; Skutch, M.E.; Driggers, J.M.; Hopkins, R.H.

    1980-06-30

    During this reporting period significant milestones have been met. A new barrier crucible design which consistently maintains melt stability over long periods of time has been successfully tested and used in long growth runs. The pellet feeder for melt replenishment was operated continuously for growth runs of up to 17 hours (a one day growth cycle). The liquid level sensor comprising a laser/sensor system was operated, performed well, and meets the requirements for maintaining liquid level height during growth and melt replenishment. An automated feedback loop connecting the feed mechanism and the liquid level sensing system was designed and constructed and, during the preparation of this report, operated successfully for 3 1/2 hours demonstrating the feasibility of semi-automated dendritic web growth. The web throughput task has resulted in a demonstration of wider good quality web as well as a demonstration of higher throughput rates. The accomplishments during the report period are described in detail. The economic analysis of the dendritic web process was updated. The sensitivity of the cost of sheet to variations in capital equipment cost and recycling dendrites was calculated; and it was shown that these factors have relatively little impact on sheet cost. An important finding was that dendrites from web which had gone all the way through the solar cell fabrication process, when melted and grown into web, produce crystals which show no degradation in cell efficiency. Material quality remains high and cells made from web grown at the start, during, and the end of a run from a replenished melt show comparable efficiencies.

  9. Flexible Conveyance Control System for Agile Manufacturing

    NASA Astrophysics Data System (ADS)

    Uchiyama, Kazuhisa; Uchimura, Keiichi; Yoshikawa, Takeru; Shishino, Satoru; Hu, Zhencheng

    The control of conveyance between processes still relies on the engineer's experience. It is difficult to correspond to the change in the conveyance layout due to the expansion and reduction of production and the breakdown of conveyance devices. In this paper, we propose a conveyance control system that can adapt to changes in the conveyance layout and we aim at the improvement of the amount of total conveyance. First of all, the system is divided into the part where the conveyance layout is made a data base and the part where the conveyance control that uses the congestion index is done. Therefore, it is possible to deal flexibly by changing the data base part without changing the conveyance control part when it is necessary to change the conveyance layout suddenly. In all the combinations of the conveyance layout and the turning on pattern used as a result of the simulation, the proposed conveyance control method became a great result by the amount of total conveyance.

  10. An updated list of AGILE bright γ-ray sources and their variability in pointing mode

    NASA Astrophysics Data System (ADS)

    Verrecchia, F.; Pittori, C.; Chen, A. W.; Bulgarelli, A.; Tavani, M.; Lucarelli, F.; Giommi, P.; Vercellone, S.; Pellizzoni, A.; Giuliani, A.; Longo, F.; Barbiellini, G.; Trifoglio, M.; Gianotti, F.; Argan, A.; Antonelli, L. A.; Caraveo, P.; Cardillo, M.; Cattaneo, P. W.; Cocco, V.; Colafrancesco, S.; Contessi, T.; Costa, E.; Del Monte, E.; De Paris, G.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Evangelista, Y.; Fanari, G.; Feroci, M.; Ferrari, A.; Fiorini, M.; Fornari, F.; Fuschino, F.; Froysland, T.; Frutti, M.; Galli, M.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Liello, F.; Lipari, P.; Mattaini, E.; Marisaldi, M.; Mastropietro, M.; Mauri, A.; Mauri, F.; Mereghetti, S.; Morelli, E.; Moretti, E.; Morselli, A.; Pacciani, L.; Perotti, F.; Piano, G.; Picozza, P.; Pilia, M.; Pontoni, C.; Porrovecchio, G.; Prest, M.; Primavera, R.; Pucella, G.; Rapisarda, M.; Rappoldi, A.; Rossi, E.; Rubini, A.; Sabatini, S.; Santolamazza, P.; Soffitta, P.; Stellato, S.; Striani, E.; Tamburelli, F.; Traci, A.; Trois, A.; Vallazza, E.; Vittorini, V.; Zanello, D.; Salotti, L.; Valentini, G.

    2013-10-01

    Aims: We present a variability study of a sample of bright γ-ray(30 Mev-50 Gev) sources. This sample is an extension of the first AGILE catalogue of γ-ray sources (1AGL), obtained using the complete set of AGILE observations in pointing mode performed during a 2.3 year period from July 9, 2007 until October 30, 2009. Methods: The dataset of AGILE pointed observations covers a long time interval and its γ-ray data archive is useful for monitoring studies of medium-to-high brightness γ-ray sources. In the analysis reported here, we used data obtained with an improved event filter that covers a wider field of view, on a much larger (about 27.5 months) dataset, integrating data on observation block time scales, which mostly range from a few days to thirty days. Results: The data processing resulted in a better characterized source list than 1AGL was, and includes 54 sources, 7 of which are new high galactic latitude (|BII| ≥ 5) sources, 8 are new sources on the galactic plane, and 20 sources from the previous catalogue with revised positions. Eight 1AGL sources (2 high-latitude and 6 on the galactic plane) were not detected in the final processing either because of low OB exposure and/or due to their position in complex galactic regions. We report the results in a catalogue of all the detections obtained in each single OB, including the variability results for each of these sources. In particular, we found that 12 sources out of 42 or 11 out of 53 are variable, depending on the variability index used, where 42 and 53 are the number of sources for which these indices could be calculated. Seven of the 11 variable sources are blazars, the others are Crab pulsar+nebula, LS I +61°303, Cyg X-3, and 1AGLR J2021+4030. Table 5 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/558/A137

  11. Agility in adversity: Vaccines on Demand.

    PubMed

    De Groot, Anne S; Moise, Leonard; Olive, David; Einck, Leo; Martin, William

    2016-09-01

    Is the US ready for a biological attack using Ebola virus or Anthrax? Will vaccine developers be able to produce a Zika virus vaccine, before the epidemic spreads around the world? A recent report by The Blue Ribbon Study Panel on Biodefense argues that the US is not ready for these challenges, however, technologies and capabilities that could address these deficiencies are within reach. Vaccine technologies have advanced and readiness has improved in recent years, due to advances in sequencing technology and computational power making the 'vaccines on demand' concept a reality. Building a robust strategy to design effective biodefense vaccines from genome sequences harvested by real-time biosurveillance will benefit from technologies that are being brought to bear on the cancer cure 'moonshot'. When combined with flexible vaccine production platforms, vaccines on demand will relegate expensive and, in some cases, insufficiently effective vaccine stockpiles to the dust heap of history. PMID:27389971

  12. A Software Development Simulation Model of a Spiral Process

    NASA Technical Reports Server (NTRS)

    Mizell, Carolyn; Malone, Linda

    2007-01-01

    There is a need for simulation models of software development processes other than the waterfall because processes such as spiral development are becoming more and more popular. The use of a spiral process can make the inherently difficult job of cost and schedule estimation even more challenging due to its evolutionary nature, but this allows for a more flexible process that can better meet customers' needs. This paper will present a discrete event simulation model of spiral development that can be used to analyze cost and schedule effects of using such a process in comparison to a waterfall process.

  13. Developing health promoting practices: a transformative process.

    PubMed

    Hartrick, G

    1998-01-01

    For health care professionals to successfully make the transition from disease care to health promotion requires a reorientation of how such professionals think and behave in their practice. This paper describes a multidisciplinary team's transition from disease care to health promotion. The research was conducted to learn what is involved in developing health promotion practices and the major changes practitioners experience as they shift from disease care to health promotion. A large, acute care institution and public health agency collaborated to address the needs of families and children with asthma, allergies, and eczema, with the goal of changing the focus from inpatient care to ambulatory or community-based care. A team of 5 nurses, 1 physiotherapist, 1 respiratory technologist, and 1 nutritionist was formed to undertake the initiative. PMID:9805341

  14. Enabler for the agile virtual enterprise

    NASA Astrophysics Data System (ADS)

    Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

    2001-10-01

    In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

  15. Lean and Agile Precision Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Slocum, Alexander H.

    2002-01-01

    A quasi-kinematic coupling (QKC) is an alignment interface that can be used to make low-cost assemblies with sub-micron precision and/or sealing contact. Unlike kinematic couplings that rely on point contacts formed by mating balls in v-grooves, quasi-kinematic couplings are based on arc contacts formed by mating three balls with three axisymmetric grooves. Though a quasi-kinematic coupling is technically not an exact constraint coupling, proper design of the contacts can produce a weakly over constrained coupling that emulates an exact constraint coupling. This paper covers the practical design of quasi-kinematic couplings and derives the theory that predicts quasi-kinematic coupling stiffness. A metric of over constraint is presented and used to develop recommended practices for minimizing the over constraint in quasi-kinematic couplings. Experimental results are provided to show that quasi-kinematic couplings can provide repeatability (1/4 micron) that is comparable to exact constraint couplings.

  16. Agile delivery of protein therapeutics to CNS.

    PubMed

    Yi, Xiang; Manickam, Devika S; Brynskikh, Anna; Kabanov, Alexander V

    2014-09-28

    A variety of therapeutic proteins have shown potential to treat central nervous system (CNS) disorders. Challenge to deliver these protein molecules to the brain is well known. Proteins administered through parenteral routes are often excluded from the brain because of their poor bioavailability and the existence of the blood-brain barrier (BBB). Barriers also exist to proteins administered through non-parenteral routes that bypass the BBB. Several strategies have shown promise in delivering proteins to the brain. This review, first, describes the physiology and pathology of the BBB that underscore the rationale and needs of each strategy to be applied. Second, major classes of protein therapeutics along with some key factors that affect their delivery outcomes are presented. Third, different routes of protein administration (parenteral, central intracerebroventricular and intraparenchymal, intranasal and intrathecal) are discussed along with key barriers to CNS delivery associated with each route. Finally, current delivery strategies involving chemical modification of proteins and use of particle-based carriers are overviewed using examples from literature and our own work. Whereas most of these studies are in the early stage, some provide proof of mechanism of increased protein delivery to the brain in relevant models of CNS diseases, while in few cases proof of concept had been attained in clinical studies. This review will be useful to broad audience of students, academicians and industry professionals who consider critical issues of protein delivery to the brain and aim developing and studying effective brain delivery systems for protein therapeutics. PMID:24956489

  17. Agile Delivery of Protein Therapeutics to CNS

    PubMed Central

    Yi, Xiang; Manickam, Devika S.; Brynskikh, Anna; Kabanov, Alexander V.

    2014-01-01

    A variety of therapeutic proteins have shown potential to treat central nervous system (CNS) disorders. Challenge to deliver these protein molecules to the brain is well known. Proteins administered through parenteral routes are often excluded from the brain because of their poor bioavailability and the existence of the blood-brain barrier (BBB). Barriers also exist to proteins administered through non-parenteral routes that bypass the BBB. Several strategies have shown promise in delivering proteins to the brain. This review, first, describes the physiology and pathology of the BBB that underscore the rationale and needs of each strategy to be applied. Second, major classes of protein therapeutics along with some key factors that affect their delivery outcomes are presented. Third, different routes of protein administration (parenteral, central intracerebroventricular and intraparenchymal, intranasal and intrathecal) are discussed along with key barriers to CNS delivery associated with each route. Finally, current delivery strategies involving chemical modification of proteins and use of particle-based carriers are overviewed using examples from literature and our own work. Whereas most of these studies are in the early stage, some provide proof of mechanism of increased protein delivery to the brain in relevant models of CNS diseases, while in few cases proof of concept had been attained in clinical studies. This review will be useful to broad audience of students, academicians and industry professionals who consider critical issues of protein delivery to the brain and aim developing and studying effective brain delivery systems for protein therapeutics. PMID:24956489

  18. Global Software Development Patterns for Project Management

    NASA Astrophysics Data System (ADS)

    Välimäki, Antti; Kääriäinen, Jukka; Koskimies, Kai

    Global software development with the agile or waterfall development process has been taken into use in many companies. GSD offers benefits but also new challenges without known, documented solutions. The goal of this research is to present current best practices for GSD in the form of process patterns for project management, evaluated by using a scenario-based assessment method. The best practices have been collected from a large company operating in process automation. It is expected that the resulting pattern language helps other companies to improve their GSD processes by incorporating the patterns in the processes.

  19. Eutectic experiment development for space processing

    NASA Technical Reports Server (NTRS)

    Hopkins, R. H.

    1972-01-01

    A ground base test plan and a specimen evaluation scheme have been developed for the aluminum-copper eutectic solidification experiment to be run in the M518 multipurpose electric furnace during the Skylab mission. Besides thermal and solidification studies a detailed description is given of the quantitative metallographic technique which is appropriate for characterizing eutectic structures. This method should prove a key tool for evaluating specimen microstructure which is the most sensitive indicator of changes produced during solidification. It has been recommended that single grain pre-frozen eutectic specimens be used to simplify microstructural evaluation and to eliminate any porosity in the as-cast eutectic specimens. High purity (99.999%) materials from one supplier should be employed for all experiments. Laboratory studies indicate that porosity occurs in the MRC as-cast eutectic ingots but that this porosity can be eliminated by directional freezing. Chemical analysis shows that the MRC ingots are slightly Al rich and contain about .03% impurity. Because of the impurity content the lower cooldown rate (1.2 C/min) should be used for eutectic freezing if MRC material is used in the M518 furnace.

  20. Development of Pulsed Processes for the Manufacture of Solar Cells

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The development status of the process based upon ion implantation for the introduction of junctions and back surface fields is described. A process sequence is presented employing ion implantation and pulse processing. Efforts to improve throughout and descrease process element costs for furnace annealing are described. Design studies for a modular 3,000 wafer per hour pulse processor are discussed.

  1. Impact of Business Intelligence and IT Infrastructure Flexibility on Competitive Advantage: An Organizational Agility Perspective

    ERIC Educational Resources Information Center

    Chen, Xiaofeng

    2012-01-01

    There is growing use of business intelligence (BI) for better management decisions in industry. However, empirical studies on BI are still scarce in academic research. This research investigates BI from an organizational agility perspective. Organizational agility is the ability to sense and respond to market opportunities and threats with speed,…

  2. Renewed gamma-ray activity of the Blazar 3C 454.3 detected by AGILE

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Parmiggiani, N.; Fioretti, V.; Zoli, A.; Lucarelli, F.; Verrecchia, F.; Pittori, C.; Vercellone, S.; Piano, G.; Munar-Adrover, P.; Tavani, M.; Donnarumma, I.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-06-01

    The AGILE satellite is detecting a significant enhancement in gamma-ray activity from the FSRQ 3C 454.3 (known as 1AGLR J2254+1609) since the recent AGILE ATel #9157, and the optical activity reported in ATel #9150.

  3. 21 CFR 861.20 - Summary of standards development process.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Summary of standards development process. 861.20... Standards Development and Publication § 861.20 Summary of standards development process. The procedure by... and necessary to provide reasonable assurance of the safety and effectiveness of the device; (ii)...

  4. Developing Mathematical Processes (DMP): Field Test Evaluation, 1972-73.

    ERIC Educational Resources Information Center

    Schall, William E.; And Others

    Developing Mathematical Processes (DMP) is a research-based, innovative, process-oriented elementary mathematics program that was developed at the Research and Development Center for Cognitive Learning, University of Wisconsin-Madison. The program utilizes an activities approach to mathematics. Emphasis is on manipulative materials and sequencing…

  5. Waste immobilization process development at the Savannah River Plant

    SciTech Connect

    Charlesworth, D L

    1986-01-01

    Processes to immobilize various wasteforms, including waste salt solution, transuranic waste, and low-level incinerator ash, are being developed. Wasteform characteristics, process and equipment details, and results from field/pilot tests and mathematical modeling studies are discussed.

  6. Autonomous Guidance of Agile Small-scale Rotorcraft

    NASA Technical Reports Server (NTRS)

    Mettler, Bernard; Feron, Eric

    2004-01-01

    This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

  7. Gamma-ray blazars: The view from AGILE

    NASA Astrophysics Data System (ADS)

    D'Ammando, F.; Bulgarelli, A.; Chen, A. W.; Donnarumma, I.; Giuliani, A.; Longo, F.; Pacciani, L.; Pucella, G.; Striani, E.; Tavani, M.; Vercellone, S.; Vittorini, V.; Covino, S.; Krimm, H. A.; Raiteri, C. M.; Romano, P.; Villata, M.

    2011-07-01

    During the first 3 years of operation the Gamma-Ray Imaging Detector onboard the AGILE satellite detected several blazars in a high γ-ray activity: 3C 279, 3C 454.3, PKS 1510-089, S5 0716+714, 3C 273, W Comae, Mrk 421, PKS 0537-441 and 4C +21.35. Thanks to the rapid dissemination of our alerts, we were able to obtain multiwavelength data from other observatories such as Spitzer, Swift, RXTE, Suzaku, INTEGRAL, MAGIC, VERITAS, and ARGO as well as radio-to-optical coverage by means of the GASP Project of the WEBT and the REM Telescope. This large multifrequency coverage gave us the opportunity to study the variability correlations between the emission at different frequencies and to obtain simultaneous Spectral Energy Distributions of these sources from radio to γ-ray energy bands, investigating the different mechanisms responsible for their emission and uncovering in some cases a more complex behavior with respect to the standard models. We present a review of the most interesting AGILE results on these γ-ray blazars and their multifrequency data.

  8. Discovery of New Gamma-Ray Pulsars with AGILE

    NASA Astrophysics Data System (ADS)

    Pellizzoni, A.; Pilia, M.; Possenti, A.; Chen, A.; Giuliani, A.; Trois, A.; Caraveo, P.; Del Monte, E.; Fornari, F.; Fuschino, F.; Mereghetti, S.; Tavani, M.; Argan, A.; Burgay, M.; Cognard, I.; Corongiu, A.; Costa, E.; D'Amico, N.; De Luca, A.; Esposito, P.; Evangelista, Y.; Feroci, M.; Johnston, S.; Kramer, M.; Longo, F.; Marisaldi, M.; Theureau, G.; Weltevrede, P.; Barbiellini, G.; Boffelli, F.; Bulgarelli, A.; Cattaneo, P. W.; Cocco, V.; D'Ammando, F.; DeParis, G.; Di Cocco, G.; Donnarumma, I.; Fiorini, M.; Froysland, T.; Galli, M.; Gianotti, F.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Lipari, P.; Mineo, T.; Morselli, A.; Pacciani, L.; Perotti, F.; Piano, G.; Picozza, P.; Prest, M.; Pucella, G.; Rapisarda, M.; Rappoldi, A.; Sabatini, S.; Soffitta, P.; Trifoglio, M.; Vallazza, E.; Vercellone, S.; Vittorini, V.; Zambra, A.; Zanello, D.; Pittori, C.; Verrecchia, F.; Preger, B.; Santolamazza, P.; Giommi, P.; Salotti, L.; Bignami, G. F.

    2009-04-01

    Using gamma-ray data collected by the Astro-rivelatore Gamma ad Immagini LEggero (AGILE) satellite over a period of almost one year (from 2007 July to 2008 June), we searched for pulsed signals from 35 potentially interesting radio pulsars, ordered according to F_{γ}∝ √{\\dot{E}} d^{-2} and for which contemporary or recent radio data were available. AGILE detected three new top-ranking nearby and Vela-like pulsars with good confidence both through timing and spatial analysis. Among the newcomers we find pulsars with very high rotational energy losses, such as the remarkable PSR B1509 - 58 with a magnetic field in excess of 1013 Gauss, and PSR J2229 + 6114 providing a reliable identification for the previously unidentified EGRET source 3EG 2227 + 6122. Moreover, the powerful millisecond pulsar B1821 - 24, in the globular cluster M28, is detected during a fraction of the observations. Four other promising gamma-ray pulsar candidates, among which is the notable J2043 + 2740 with an age in excess of 1 million years, show a possible detection in the timing analysis only and deserve confirmation.

  9. Enhanced detection of Terrestrial Gamma-Ray Flashes by AGILE

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Argan, A.; Ursi, A.; Gjesteland, T.; Fuschino, F.; Labanti, C.; Galli, M.; Tavani, M.; Pittori, C.; Verrecchia, F.; D'Amico, F.; Ostgaard, N.; Mereghetti, S.; Campana, R.; Cattaneo, P.; Bulgarelli, A.; Colafrancesco, S.; Dietrich, S.; Longo, F.; Gianotti, F.; Giommi, P.; Rappoldi, A.; Trifoglio, M.; Trois, A.

    2015-12-01

    At the end of March 2015 the onboard configuration of the AGILE satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-ray Flashes (TGFs), especially the short duration ones. We present here the characteristics of the new TGF sample after several months of stable operations with the new configuration. The configuration change was highly successful resulting in the detection of about 100 TGFs/month, an increase of a factor about 11 in TGFs detection rate with respect to previous configuration. As expected, the largest fraction of the new events has short duration, with a median duration of 80 microseconds. We also obtain a sample of events with simultaneous association, within 100 microseconds, with lightning sferics detected by the World Wide Lightning Location Network (WWLLN), confirming previous results reported by the Fermi mission. Given the high detection rate and the AGILE very low (+/-2.5°) orbital inclination, the new configuration provides the largest TGF detection rate surface density (TGFs / km2 / year) to date, opening space for correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region. Eventually, the events with associated simultaneous WWLLN sferics provide a highly reliable sample to probe the long-standing issue of the TGF maximal energy.

  10. Virtual Collaborative Simulation Environment for Integrated Product and Process Development

    NASA Technical Reports Server (NTRS)

    Gulli, Michael A.

    1997-01-01

    Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

  11. Dimpled ball grid array process development for space flight applications

    NASA Technical Reports Server (NTRS)

    Barr, S. L.; Mehta, A.

    2000-01-01

    A 472 dimpled ball grid array (D-BGA) package has not been used in past space flight environments, therefore it was necessary to develop a process that would yield robust and reliable solder joints. The process developing assembly, inspection and rework techniques, were verified by conducting environmental tests. Since the 472 D-BGA packages passed the above environmental tests within the specifications, the process was successfully developed for space flight electronics.

  12. Development of holistic vs. featural processing in face recognition

    PubMed Central

    Nakabayashi, Kazuyo; Liu, Chang Hong

    2014-01-01

    According to a classic view developed by Carey and Diamond (1977), young children process faces in a piecemeal fashion before adult-like holistic processing starts to emerge at the age of around 10 years. This is known as the encoding switch hypothesis. Since then, a growing body of studies have challenged the theory. This article will provide a critical appraisal of this literature, followed by an analysis of some more recent developments. We will conclude, quite contrary to the classical view, that holistic processing is not only present in early child development, but could even precede the development of part-based processing. PMID:25368565

  13. Kedalion: NASA's Adaptable and Agile Hardware/Software Integration and Test Lab

    NASA Technical Reports Server (NTRS)

    Mangieri, Mark L.; Vice, Jason

    2011-01-01

    NASA fs Kedalion engineering analysis lab at Johnson Space Center is on the forefront of validating and using many contemporary avionics hardware/software development and integration techniques, which represent new paradigms to heritage NASA culture. Kedalion has validated many of the Orion hardware/software engineering techniques borrowed from the adjacent commercial aircraft avionics solution space, with the intention to build upon such techniques to better align with today fs aerospace market. Using agile techniques, commercial products, early rapid prototyping, in-house expertise and tools, and customer collaboration, Kedalion has demonstrated that cost effective contemporary paradigms hold the promise to serve future NASA endeavors within a diverse range of system domains. Kedalion provides a readily adaptable solution for medium/large scale integration projects. The Kedalion lab is currently serving as an in-line resource for the project and the Multipurpose Crew Vehicle (MPCV) program.

  14. Rehearsal development as development of iterative recall processes.

    PubMed

    Lehmann, Martin

    2015-01-01

    Although much is known about the critical importance of active verbal rehearsal for successful recall, knowledge about the mechanisms of rehearsal and their respective development in children is very limited. To be able to rehearse several items together, these items have to be available, or, if presented and rehearsed previously, retrieved from memory. Therefore, joint rehearsal of several items may itself be considered recall. Accordingly, by analyzing free recall, one cannot only gain insight into how recall and rehearsal unfold, but also into how principles that govern children's recall govern children's rehearsal. Over a period of three and a half years (beginning at grade 3) 54 children were longitudinally assessed seven times on several overt rehearsal free recall trials. A first set of analyses on recall revealed significant age-related increases in the primacy effect and an age-invariant recency effect. In the middle portion of the list, wave-shaped recall characteristics emerged and increased with age, indicating grouping of the list into subsequences. In a second set of analyses, overt rehearsal behavior was decomposed into distinct rehearsal sets. Analyses of these sets revealed that the distribution of rehearsals within each set resembled the serial position curves with one- or two-item primacy and recency effects and wave-shaped rehearsal patterns in between. In addition, rehearsal behavior throughout the list was characterized by a decreasing tendency to begin rehearsal sets with the first list item. This result parallels the phenomenon of beginning recall with the first item on short lists and with the last item on longer lists. PMID:25870569

  15. MEMS product engineering using fabrication process development tools

    NASA Astrophysics Data System (ADS)

    Hahn, K.; Schmidt, T.; Ortloff, D.; Popp, J.; Wagener, A.; Brück, R.

    2008-12-01

    The development of MEMS devices differs substantially from product engineering methods used in more traditional industries. The approach is characterized by a close customer involvement and product specific fabrication processes. A large number interdependencies between device design on the one hand and manufacturing process development on the other hand make product engineering in the MEMS area a rather tedious and complicated task. In this paper we discuss a comprehensive customer-oriented MEMS product engineering methodology. Both MEMS design and fabrication process development are analyzed with regard to procedures and interfaces used in order to develop an appropriate CAD support either in terms of existing tools or by specifying individual tools to be implemented. The manufacturing process development is part of this holistic approach and is supported by a CAD environment for the management and the design of thin-film MEMS fabrication processes. This environment has been developed by the authors and became recently commercially available.

  16. Performance, Agility and Cost of Cloud Computing Services for NASA GES DISC Giovanni Application

    NASA Astrophysics Data System (ADS)

    Pham, L.; Chen, A.; Wharton, S.; Winter, E. L.; Lynnes, C.

    2013-12-01

    The NASA Goddard Earth Science Data and Information Services Center (GES DISC) is investigating the performance, agility and cost of Cloud computing for GES DISC applications. Giovanni (Geospatial Interactive Online Visualization ANd aNalysis Infrastructure), one of the core applications at the GES DISC for online climate-related Earth science data access, subsetting, analysis, visualization, and downloading, was used to evaluate the feasibility and effort of porting an application to the Amazon Cloud Services platform. The performance and the cost of running Giovanni on the Amazon Cloud were compared to similar parameters for the GES DISC local operational system. A Giovanni Time-Series analysis of aerosol absorption optical depth (388nm) from OMI (Ozone Monitoring Instrument)/Aura was selected for these comparisons. All required data were pre-cached in both the Cloud and local system to avoid data transfer delays. The 3-, 6-, 12-, and 24-month data were used for analysis on the Cloud and local system respectively, and the processing times for the analysis were used to evaluate system performance. To investigate application agility, Giovanni was installed and tested on multiple Cloud platforms. The cost of using a Cloud computing platform mainly consists of: computing, storage, data requests, and data transfer in/out. The Cloud computing cost is calculated based on the hourly rate, and the storage cost is calculated based on the rate of Gigabytes per month. Cost for incoming data transfer is free, and for data transfer out, the cost is based on the rate in Gigabytes. The costs for a local server system consist of buying hardware/software, system maintenance/updating, and operating cost. The results showed that the Cloud platform had a 38% better performance and cost 36% less than the local system. This investigation shows the potential of cloud computing to increase system performance and lower the overall cost of system management.

  17. Team Software Development for Aerothermodynamic and Aerodynamic Analysis and Design

    NASA Technical Reports Server (NTRS)

    Alexandrov, N.; Atkins, H. L.; Bibb, K. L.; Biedron, R. T.; Carpenter, M. H.; Gnoffo, P. A.; Hammond, D. P.; Jones, W. T.; Kleb, W. L.; Lee-Rausch, E. M.

    2003-01-01

    A collaborative approach to software development is described. The approach employs the agile development techniques: project retrospectives, Scrum status meetings, and elements of Extreme Programming to efficiently develop a cohesive and extensible software suite. The software product under development is a fluid dynamics simulator for performing aerodynamic and aerothermodynamic analysis and design. The functionality of the software product is achieved both through the merging, with substantial rewrite, of separate legacy codes and the authorship of new routines. Examples of rapid implementation of new functionality demonstrate the benefits obtained with this agile software development process. The appendix contains a discussion of coding issues encountered while porting legacy Fortran 77 code to Fortran 95, software design principles, and a Fortran 95 coding standard.

  18. The Empirical Development of the Normative Message Processing Scale.

    ERIC Educational Resources Information Center

    Aune, R. Kelly; Reynolds, Rodney A.

    1994-01-01

    Reports on five studies on the development, conceptual validation, and behavioral validation of the Normative Message Processing Scale (NMPS). Compares the conceptual and predictive validity of the NMPS to related trait information-processing instruments. Argues for the need to develop an instrument that distinguishes between the tendency to…

  19. Staff Development and the Process of Teacher Change.

    ERIC Educational Resources Information Center

    Guskey, Thomas R.

    1986-01-01

    Presents a model describing the process of teacher change, particularly through staff development programs, and presenting opportunities for future research. Hypothesizes a temporal sequence of events that typify the process from staff development to enduring change in teachers' perceptions and attitudes. Describes conditions that facilitate…

  20. 43 CFR 10005.17 - Plan development process.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Plan development process. 10005.17 Section 10005.17 Public Lands: Interior Regulations Relating to Public Lands (Continued) UTAH RECLAMATION...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of...

  1. Tenuous Options: The Career Development Process for Undocumented Students

    ERIC Educational Resources Information Center

    Ortiz, Anna M.; Hinojosa, Alejandro

    2010-01-01

    This chapter explores the challenges that undocumented students face as they enact their career development process, considering the theoretical perspectives and developmental processes that uniquely complicate their aspirations. The authors review the professional development challenges that undocumented students face as they make career…

  2. The Community Development Process: The Rediscovery of Local Initiative.

    ERIC Educational Resources Information Center

    Biddle, William W.; Biddle, Loureide J.

    The development process in two communities, a mining county in rural Appalachia and a deteriorating neighborhood in a northern industrial city, is presented in case-study form. Concepts and commonly used terms are defined; a process of development is identified that can be used in groups small enough to permit attention to the growth of persons.…

  3. Sustaining Innovation: Developing an Instructional Technology Assessment Process

    ERIC Educational Resources Information Center

    Carmo, Monica Cristina

    2013-01-01

    This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

  4. 43 CFR 10005.17 - Plan development process.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Plan development process. 10005.17 Section 10005.17 Public Lands: Interior Regulations Relating to Public Lands (Continued) UTAH RECLAMATION...'S MITIGATION AND CONSERVATION PLAN § 10005.17 Plan development process. Following adoption of...

  5. On the Heterogeneity of Psychological Processes in Syntactic Development.

    ERIC Educational Resources Information Center

    Hass, Wilbur A.

    Children's language acquisition is viewed by developmental psycholinguists as a process of change in the organization of language processing operations. Normal children seem to acquire their native language by this process, rather than by eliminating specific mistakes. Preschool language develops in stages, and knowledge of where syntactic change…

  6. Challenges of Engaging Local Stakeholders for Statewide Program Development Process

    ERIC Educational Resources Information Center

    Martin, Michael J.; Leuci, Mary; Stewart, Mark

    2014-01-01

    The University of Missouri Extension needed to develop an annual program review process that collaboratively engaged county-level stakeholders. The results from the first 2 years highlight the results, challenges, and implications of the design process. The annual review process needs to be adaptive, responsive, and reflective from year to year…

  7. Developing Friction Stir Welding Process Model for ICME Application

    NASA Astrophysics Data System (ADS)

    Yang, Yu-Ping

    2015-01-01

    A framework for developing a product involving manufacturing processes was developed with integrated computational materials engineering approach. The key component in the framework is a process modeling tool which includes a thermal model, a microstructure model, a thermo-mechanical, and a property model. Using friction stir welding (FSW) process as an example, development of the process modeling tool was introduced in detail. The thermal model and the microstructure model of FSW of steels were validated with the experiment data. The model can predict reasonable temperature and hardness distributions as observed in the experiment. The model was applied to predict residual stress and joint strength of a pipe girth weld.

  8. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Basile, Lisa R.; Kelly, Angelita C.

    1987-01-01

    The Spacelab Data Processing Facility (SLDPF) is an integral part of the Space Shuttle data network for missions that involve attached scientific payloads. Expert system prototypes were developed to aid in the performance of the quality assurance function of the Spacelab and/or Attached Shuttle Payloads processed telemetry data. The Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS), two expert systems, were developed to determine their feasibility and potential in the quality assurance of processed telemetry data. The capabilities and performance of these systems are discussed.

  9. Process development testing in support of the plutonium immobilization program

    SciTech Connect

    Herman, C; Ebbinghaus, B

    2000-02-11

    As an integral part of the plutonium disposition program, formulation and process development is being performed for the immobilization of surplus plutonium in a titanate-based ceramic. Small-scale process prototypic and lab-scale functionally prototypic equipment have been tested to help define the immobilization process. The testing has included non-radioactive surrogates and actual actinide oxides contained in the immobilized form. A summary of the process development studies, as well as the formulation studies relevant to the process, will be provided.

  10. Process Development and Integration Lab (PDIL) + Measurements and Characterization (Presentation)

    SciTech Connect

    Nelson, B.

    2008-04-01

    The Process Development and Integration Lab (PDIL) Vision is to integrate deposition, characterization, and processing by being flexible and robust; having a standardized transfer interface; and controlled sample ambient between tools. The benefits are: (1) answers to previously inaccessible research questions; (2) control and characterization of critical surfaces (interfaces) and how their impact on subsequent layers; (3) assess process-related source chemistry, surface chemistry and kinetics, and bulk reconstruction; (4) grow layers and alter interfaces using controlled processes and transfer ambients (without exposure to air); (5) develop new techniques, methodologies, device structures, materials, and tools (growth, processing, and analytical); and (6) improved collaborations with university and industry researchers.

  11. Tank 42 sludge-only process development for the Defense Waste Processing Facility (DWPF)

    SciTech Connect

    Lambert, D.P.

    2000-03-22

    Defense Waste Processing Facility (DWPF) requested the development of a sludge-only process for Tank 42 sludge since at the current processing rate, the Tank 51 sludge has been projected to be depleted as early as August 1998. Testing was completed using a non-radioactive Tank 42 sludge simulant. The testing was completed under a range of operating conditions, including worst case conditions, to develop the processing conditions for radioactive Tank 42 sludge. The existing Tank 51 sludge-only process is adequate with the exception that 10 percent additional acid is recommended during sludge receipt and adjustment tank (SRAT) processing to ensure adequate destruction of nitrite during the SRAT cycle.

  12. Design studies for a spectrally agile staring sensor /SASS/ system

    NASA Astrophysics Data System (ADS)

    Kollodge, M. A.; Cox, J. A.; Marshall, W. C.; Solstad, R. G.; Steadman, S. S.

    1981-01-01

    The operation of the Spectrally Agile Staring Sensor (SASS) involves the employment of a telescope system which uses variable spectral band information to detect and identify moving IR sources against the background radiance of the earth. A description is presented of SASS simulation studies. A signal-to-noise ratio (SNR) expression used as a measure of system performance is considered. Attention is given to the target trajectory generator, a target signature model, a background and atmospheric model, a Dual Tunable Fabry-Perot (DTFP) optical filter model, problems of out-of-band leakage transmission, a Focal Plane Array (FPA)/spot convolution model, SNR improvement with high filter transmission efficiency, system performance vs DTFP optical filter parameters, and system performance vs atmospheric conditions.

  13. Software Product Line Engineering Approach for Enhancing Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Martinez, Jabier; Diaz, Jessica; Perez, Jennifer; Garbajosa, Juan

    One of the main principles of Agile methodologies consists in the early and continuous delivery of valuable software by short time-framed iterations. After each iteration, a working product is delivered according to the requirements defined at the beginning of the iteration. Testing tools facilitate the task of checking if the system provides the expected behavior according to the specified requirements. However, since testing tools need to be adapted in order to test new working products in each iteration, a significant effort has to be invested. This work presents a Software Product Line Engineering (SPLE) approach that allows flexibility in the adaption of testing tools with the working products in an iterative way. A case study is also presented using PLUM (Product Line Unified Modeller) as the tool suite for SPL implementation and management.

  14. Frequency Agile Transceiver for Advanced Vehicle Data Links

    NASA Technical Reports Server (NTRS)

    Freudinger, Lawrence C.; Macias, Filiberto; Cornelius, Harold

    2009-01-01

    Emerging and next-generation test instrumentation increasingly relies on network communication to manage complex and dynamic test scenarios, particularly for uninhabited autonomous systems. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. Frequency agility is one characteristic of reconfigurable radios that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate a promising chipset that performs conversion of RF signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit, programmable for any frequency band between 1 MHz and 6 GHz.

  15. AGILE follow-up of the neutrino ICECUBE-160731 event

    NASA Astrophysics Data System (ADS)

    Lucarelli, F.; Pittori, C.; Verrecchia, F.; Piano, G.; Munar-Adrover, P.; Bulgarelli, A.; Fioretti, V.; Zoli, A.; Tavani, M.; Donnarumma, I.; Vercellone, S.; Minervini, G.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Parmiggiani, N.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-08-01

    Following the GCN notice posted by the ICECUBE Collaboration on July 31, 2016, reporting the detection at T0=16/07/31 01:55:04 UT of a very high energy neutrino with reconstructed arrival direction pointing at RA, DEC (J2000)=(214.5440, -0.3347 [deg]) with a 90% containement radius of 45.00 arcmin (stat+sys), we searched for transient gamma-ray emission in the AGILE data above 100 MeV. Integrating over the 48 hours from 2016-07-29 02:00 UT to 2016-07-31 02:00 UT a maximum likelihood analysis yields a possible detection at a significance level of about 3 sigma with a flux F(E > 100 MeV)=(1.5 +/- 0.7)x 10^-06 ph/cm^2/s within the GCN/AMON_ICECUBE_HESE notice error region.

  16. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Johnston, Simon; Possenti, Andrea; Manchester, Dick; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2010-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  17. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Johnston, Simon; Possenti, Andrea; Manchester, Dick; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2010-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 20 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009).

  18. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Roberts, Mallory; Weltevrede, Patrick; Kerr, Matthew; Petroff, Emily; Brook, Paul

    2013-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 43 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford. Currently five students have active projects using the radio datasets.

  19. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2011-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  20. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2011-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  1. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2012-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  2. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2012-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 37 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford.

  3. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Roberts, Mallory; Weltevrede, Patrick; Brook, Paul

    2013-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 37 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford. Currently for students have active projects using the radio datasets.

  4. Enhanced detection of terrestrial gamma-ray flashes by AGILE

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Argan, A.; Ursi, A.; Gjesteland, T.; Fuschino, F.; Labanti, C.; Galli, M.; Tavani, M.; Pittori, C.; Verrecchia, F.; D'Amico, F.; Østgaard, N.; Mereghetti, S.; Campana, R.; Cattaneo, P. W.; Bulgarelli, A.; Colafrancesco, S.; Dietrich, S.; Longo, F.; Gianotti, F.; Giommi, P.; Rappoldi, A.; Trifoglio, M.; Trois, A.

    2015-11-01

    At the end of March 2015 the onboard software configuration of the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configuration change was highly successful resulting in an increase of one order of magnitude in TGF detection rate. As expected, the largest fraction of the new events has short duration (<100 μs), and part of them has simultaneous association with lightning sferics detected by the World Wide Lightning Location Network. The new configuration provides the largest TGF detection rate surface density (TGFs/km2/yr) to date, opening prospects for improved correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region.

  5. Flat-plate solar array project. Volume 5: Process development

    NASA Astrophysics Data System (ADS)

    Gallagher, B.; Alexander, P.; Burger, D.

    1986-10-01

    The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

  6. Metal containing material processing on coater/developer system

    NASA Astrophysics Data System (ADS)

    Kawakami, Shinichiro; Mizunoura, Hiroshi; Matsunaga, Koichi; Hontake, Koichi; Nakamura, Hiroshi; Shimura, Satoru; Enomoto, Masashi

    2016-03-01

    Challenges of processing metal containing materials need to be addressed in order apply this technology to Behavior of metal containing materials on coater/developer processing including coating process, developer process and tool metal contamination is studied using CLEAN TRACKTM LITHIUS ProTM Z (Tokyo Electron Limited). Through this work, coating uniformity and coating film defectivity were studied. Metal containing material performance was comparable to conventional materials. Especially, new dispense system (NDS) demonstrated up to 80% reduction in coating defect for metal containing materials. As for processed wafer metal contamination, coated wafer metal contamination achieved less than 1.0E10 atoms/cm2 with 3 materials. After develop metal contamination also achieved less than 1.0E10 atoms/cm2 with 2 materials. Furthermore, through the metal defect study, metal residues and metal contamination were reduced by developer rinse optimization.

  7. Flat-plate solar array project. Volume 5: Process development

    NASA Technical Reports Server (NTRS)

    Gallagher, B.; Alexander, P.; Burger, D.

    1986-01-01

    The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

  8. High-power ultrasonic processing: Recent developments and prospective advances

    NASA Astrophysics Data System (ADS)

    Gallego-Juarez, Juan A.

    2010-01-01

    Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at industrial level. However, during the last ten years the interest in ultrasonic processing has revived particularly in industrial sectors where the ultrasonic technology may represent a clean and efficient tool to improve classical existing processes or an innovation alternative for the development of new processes. Such seems to be the case of relevant sectors such as food industry, environment, pharmaceuticals and chemicals manufacture, machinery, mining, etc where power ultrasound is becoming an emerging technology for process development. The possible major problem in the application of high-intensity ultrasound on industrial processing is the design and development of efficient power ultrasonic systems (generators and reactors) capable of large scale successful operation specifically adapted to each individual process. In the area of ultrasonic processing in fluid media and more specifically in gases, the development of the steppedplate transducers and other power ge with extensive radiating surface has strongly contributed to the implementation at semi-industrial and industrial stage of several commercial applications, in sectors such as food and beverage industry (defoaming, drying, extraction, etc), environment (air cleaning, sludge filtration, etc...), machinery and process for manufacturing (textile washing, paint manufacture, etc). The development of different cavitational reactors for liquid treatment in continuous flow is helping to introduce into industry the wide potential of the area of sonochemistry. Processes such as water and effluent treatment, crystallization, soil remediation, etc have been already implemented at semi-industrial and/or industrial stage. Other single advances in sectors like mining or energy have

  9. Developing Mathematical Processes (DMP). Field Test Evaluation, 1973-1974.

    ERIC Educational Resources Information Center

    Schall, William; And Others

    The Developing Mathematical Processes (DMP) program was field-tested in the kindergarten and first three grades of one parochial and five public schools. DMP is an activity-based program developed around a comprehensive list of behavioral objectives. The program is concerned with the development of intuitive geometric concepts as well as…

  10. A Neuroconstructivist Model of Past Tense Development and Processing

    ERIC Educational Resources Information Center

    Westermann, Gert; Ruh, Nicolas

    2012-01-01

    We present a neural network model of learning and processing the English past tense that is based on the notion that experience-dependent cortical development is a core aspect of cognitive development. During learning the model adds and removes units and connections to develop a task-specific final architecture. The model provides an integrated…

  11. Model for Simulating a Spiral Software-Development Process

    NASA Technical Reports Server (NTRS)

    Mizell, Carolyn; Curley, Charles; Nayak, Umanath

    2010-01-01

    A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code

  12. Recent developments in digital image processing at the Image Processing Laboratory of JPL.

    NASA Technical Reports Server (NTRS)

    O'Handley, D. A.

    1973-01-01

    Review of some of the computer-aided digital image processing techniques recently developed. Special attention is given to mapping and mosaicking techniques and to preliminary developments in range determination from stereo image pairs. The discussed image processing utilization areas include space, biomedical, and robotic applications.

  13. An assessment of space shuttle flight software development processes

    NASA Technical Reports Server (NTRS)

    1993-01-01

    In early 1991, the National Aeronautics and Space Administration's (NASA's) Office of Space Flight commissioned the Aeronautics and Space Engineering Board (ASEB) of the National Research Council (NRC) to investigate the adequacy of the current process by which NASA develops and verifies changes and updates to the Space Shuttle flight software. The Committee for Review of Oversight Mechanisms for Space Shuttle Flight Software Processes was convened in Jan. 1992 to accomplish the following tasks: (1) review the entire flight software development process from the initial requirements definition phase to final implementation, including object code build and final machine loading; (2) review and critique NASA's independent verification and validation process and mechanisms, including NASA's established software development and testing standards; (3) determine the acceptability and adequacy of the complete flight software development process, including the embedded validation and verification processes through comparison with (1) generally accepted industry practices, and (2) generally accepted Department of Defense and/or other government practices (comparing NASA's program with organizations and projects having similar volumes of software development, software maturity, complexity, criticality, lines of code, and national standards); (4) consider whether independent verification and validation should continue. An overview of the study, independent verification and validation of critical software, and the Space Shuttle flight software development process are addressed. Findings and recommendations are presented.

  14. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes were developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. The SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  15. Spacelab Data Processing Facility (SLDPF) quality assurance expert systems development

    NASA Technical Reports Server (NTRS)

    Kelly, Angelita C.; Basile, Lisa; Ames, Troy; Watson, Janice; Dallam, William

    1987-01-01

    Spacelab Data Processing Facility (SLDPF) expert system prototypes have been developed to assist in the quality assurance of Spacelab and/or Attached Shuttle Payload (ASP) processed telemetry data. SLDPF functions include the capturing, quality monitoring, processing, accounting, and forwarding of mission data to various user facilities. Prototypes for the two SLDPF functional elements, the Spacelab Output Processing System and the Spacelab Input Processing Element, are described. The prototypes have produced beneficial results including an increase in analyst productivity, a decrease in the burden of tedious analyses, the consistent evaluation of data, and the providing of concise historical records.

  16. Guideline Development Process in a Public Workers' Compensation System.

    PubMed

    Javaher, Simone P

    2015-08-01

    Washington state's public workers' compensation system has had a formal process for developing and implementing evidence-based clinical practice guidelines since 2007. Collaborating with the Industrial Insurance Medical Advisory Committee and clinicians from the medical community, the Office of the Medical Director has provided leadership and staff support necessary to develop guidelines that have improved outcomes and reduced the number of potentially harmful procedures. Guidelines are selected according to a prioritization schema and follow a development process consistent with that of the national Institute of Medicine. Evaluation criteria are also applied. Guidelines continue to be developed to provide clinical recommendations for optimizing care and reducing risk of harm. PMID:26231956

  17. VIEW OF PROCESS DEVELOPMENT PILE (PDP) TANK TOP, WITH VERTICAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF PROCESS DEVELOPMENT PILE (PDP) TANK TOP, WITH VERTICAL ELEMENTS IN BACKGROUND, LEVEL 0’, LOOKING NORTHWEST - Physics Assembly Laboratory, Area A/M, Savannah River Site, Aiken, Aiken County, SC

  18. Course Development Cycle Time: A Framework for Continuous Process Improvement.

    ERIC Educational Resources Information Center

    Lake, Erinn

    2003-01-01

    Details Edinboro University's efforts to reduce the extended cycle time required to develop new courses and programs. Describes a collaborative process improvement framework, illustrated data findings, the team's recommendations for improvement, and the outcomes of those recommendations. (EV)

  19. Process Development and Integration Laboratory (Revised) (Fact Sheet)

    SciTech Connect

    Not Available

    2011-06-01

    Capabilities fact sheet for the National Center for Photovoltaics: Process Development and Integration Laboratory. One-sided sheet that includes Scope, Core Competencies and Capabilities, and Contact/Web information.

  20. SNL/NM weapon hardware characterization process development report

    SciTech Connect

    Graff, E.W.; Chambers, W.B.

    1995-01-01

    This report describes the process used by Sandia National Laboratories, New Mexico to characterize weapon hardware for disposition. The report describes the following basic steps: (1) the drawing search process and primary hazard identification; (2) the development of Disassembly Procedures (DPs), including demilitarization and sanitization requirements; (3) the generation of a ``disposal tree``; (4) generating RCRA waste disposal information; and (5) documenting the information. Additional data gathered during the characterization process supporting hardware grouping and recycle efforts is also discussed.

  1. Development of the Low-Pressure Hydride/Dehydride Process

    SciTech Connect

    Rueben L. Gutierrez

    2001-04-01

    The low-pressure hydride/dehydride process was developed from the need to recover thin-film coatings of plutonium metal from the inner walls of an isotope separation chamber located at Los Alamos and to improve the safety operation of a hydride recovery process using hydrogen at a pressure of 0.7 atm at Rocky Flats. This process is now the heart of the Advanced Recovery and Integrated Extraction System (ARIES) project.

  2. Contributing Factors to a Successful Online Course Development Process

    ERIC Educational Resources Information Center

    Stevens, Karl B.

    2013-01-01

    This qualitative case study examined the experiences of instructional designers and professors during the online course development process. The purpose of this study was to determine if their experiences had an effect on the process itself. Data analysis revealed five emergent themes: communication, commitment to quality online courses,…

  3. Developing Mathematical Processes (DMP). Field Test Evaluation, 1972-1973.

    ERIC Educational Resources Information Center

    Schall, William E.; And Others

    The field test of the Developing Mathematical Processes (DMP) program was conducted jointly by the Falconer Central School, St. Mary's Elementary School in Dunkirk, New York, and the Teacher Education Research Center at the State University College in Fredonia, New York. DMP is a research-based, innovative, process-oriented elementary mathematics…

  4. Soil Genesis and Development, Lesson 2 - Processes of Weathering

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Weathering processes — which include physical, chemical, and biological — contribute to the development of soil. The learning objectives of the lesson are: 1) Define and distinguish physical, chemical, and biological weathering processes; and 2) Describe how rock and mineral properties and environm...

  5. Using the Storytelling/Story Acting Process for Teacher Development

    ERIC Educational Resources Information Center

    Pack, Judi

    2007-01-01

    Vivian Gussin Paley, a MacArthur Award-winning author and former kindergarten teacher, has written 12 books that chronicle her work in promoting the fantasy play of young children. A major focus of her books is a process that she developed called "Doing Stories" or "Storytelling/Story Acting" (ST/SA). The ST/SA process requires only that teachers…

  6. Dual-Process Theories and Cognitive Development: Advances and Challenges

    ERIC Educational Resources Information Center

    Barrouillet, Pierre

    2011-01-01

    Dual-process theories have gained increasing importance in psychology. The contrast that they describe between an old intuitive and a new deliberative mind seems to make these theories especially suited to account for development. Accordingly, this special issue aims at presenting the latest applications of dual-process theories to cognitive…

  7. Cultural Differences in the Development of Processing Speed

    ERIC Educational Resources Information Center

    Kail, Robert V.; McBride-Chang, Catherine; Ferrer, Emilio; Cho, Jeung-Ryeul; Shu, Hua

    2013-01-01

    The aim of the present work was to examine cultural differences in the development of speed of information processing. Four samples of US children ("N" = 509) and four samples of East Asian children ("N" = 661) completed psychometric measures of processing speed on two occasions. Analyses of the longitudinal data indicated…

  8. Lithography develop process electrostatic discharge effect mechanism study

    NASA Astrophysics Data System (ADS)

    Yang, Xiaosong; Ye, Yi Zhou; Zou, Yongxiang; Zhu, XiaoZheng

    2015-03-01

    Electrostatic discharge (ESD) problem resulting from charges on wafers is a serious concern in IC manufacturing. As is discovered in our paper, three types of defect, AA (active area) damage, IMD (Inter Metal Dielectric) crack and Via hole W corrosion that are confirmed to be induced by lithography process related ESD charging effect. We carefully studied the mechanism of these ESD charging effect by DOE splits and succeeded to dig out that these electric charge major comes from the lithography develop process. In the lithography coating and developing wafer process, the wafer will be at high spin speed at many of the steps which will easy help to store the electric charge on the wafer. In our study, the rinse step in developing process is the most key factor to store the electric charge on wafer. In generally, the higher rinse speed, the higher positive electric charge. Furthermore, we also discovered that the different step in develop rinse process have different impact on charge level, in which the acceleration and deceleration step has the highest charge voltage. As to minimize and eliminate the ESD damage in lithography process, we finally carry out the simplified recipe optimization solution which only need optimize for the develop rinse speed with different in-coming surface charge level and process application, so that can be easy implemented in the worldwide fabs.

  9. Geometric simulation analysis of multi-band mosaic imaging from the same orbit by agile satellites

    NASA Astrophysics Data System (ADS)

    Xu, Yue; Chen, Jinwei; Chen, Yueting; Xu, Zhihai; Feng, Huajun; Li, Qi

    2015-08-01

    This paper establishes a geometric model of multi-band mosaic imaging from the same orbit by agile satellites, and introduces a self-write simulation software. Geometric parameters of each band are calculated based on the attitude control ability of the satellite and the mission requirements. Considering the different ground resolution and the imaging angle of each band, two new concepts, Gradient Entropy and Structure Similarity Parameter are presented. These two values are used to evaluate the change of image quality caused by agility, and help to estimate the effect of the mission. By building the geometric model and calculating the agile information with the program, we propose a new approach of forward analysis of agile imaging, which helps users evaluate the image degradation.

  10. Renewed Gamma-Ray Emission from the blazar PKS 1510-089 Detected by AGILE

    NASA Astrophysics Data System (ADS)

    Munar-Adrover, P.; Pittori, C.; Bulgarelli, A.; Lucarelli, F.; Verrecchia, F.; Piano, G.; Fioretti, V.; Zoli, A.; Tavani, M.; Vercellone, S.; Minervini, G.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Parmiggiani, N.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-09-01

    AGILE is currently detecting enhanced gamma-ray emission above 100 MeV from a source which position is consistent with the blazar PKS 1510-089. (the last activity of this source was reported in ATel #9350).

  11. Agile machining and inspection thrust area team-on-machine probing / compatibility assessment of Parametric Technology Corporation (PTC) pro/CMM DMIS with Zeiss DMISEngine.

    SciTech Connect

    Wade, James Rokwel; Tomlinson, Kurt; Bryce, Edwin Anthony

    2008-09-01

    The charter goal of the Agile Machining and Inspection Thrust Area Team is to identify technical requirements, within the nuclear weapons complex (NWC), for Agile Machining and Inspection capabilities. During FY 2008, the team identified Parametric Technology Corporation (PTC) Pro/CMM as a software tool for use in off-line programming of probing routines--used for measurement--for machining and turning centers. The probing routine would be used for in-process verification of part geometry. The same Pro/CMM program used on the machine tool could also be employed for program validation / part verification using a coordinate measuring machine (CMM). Funding was provided to determine the compatibility of the Pro/CMM probing program with CMM software (Zeiss DMISEngine).

  12. Preliminary development of digital signal processing in microwave radiometers

    NASA Technical Reports Server (NTRS)

    Stanley, W. D.

    1980-01-01

    Topics covered involve a number of closely related tasks including: the development of several control loop and dynamic noise model computer programs for simulating microwave radiometer measurements; computer modeling of an existing stepped frequency radiometer in an effort to determine its optimum operational characteristics; investigation of the classical second order analog control loop to determine its ability to reduce the estimation error in a microwave radiometer; investigation of several digital signal processing unit designs; initiation of efforts to develop required hardware and software for implementation of the digital signal processing unit; and investigation of the general characteristics and peculiarities of digital processing noiselike microwave radiometer signals.

  13. Reliable software and communication 2: Controlling the software development process

    NASA Astrophysics Data System (ADS)

    Dalal, Siddhartha R.; Horgan, Joseph R.; Kettenring, Jon R.

    1994-01-01

    The software created by industrial, educational, and research organizations is increasingly large and complex. It also occupies a central role in the reliability and safety of many essential services. We examine the software development process and suggest opportunities for improving the process by using a combination of statistical and other process control techniques. Data, analysis of data, and tools for collecting data are crucial to our approach. Although our views are based upon experiences with large telecommunications systems, they are likely to be useful to many other developers of large software systems.

  14. Development of pulsed processes for the manufacture of solar cells

    NASA Technical Reports Server (NTRS)

    Minnucci, J. A.

    1978-01-01

    The results of a 1-year program to develop the processes required for low-energy ion implantation for the automated production of silicon solar cells are described. The program included: (1) demonstrating state-of-the-art ion implantation equipment and designing an automated ion implanter, (2) making efforts to improve the performance of ion-implanted solar cells to 16.5 percent AM1, (3) developing a model of the pulse annealing process used in solar cell production, and (4) preparing an economic analysis of the process costs of ion implantation.

  15. Development of an Ontology-Directed Signal Processing Toolbox

    SciTech Connect

    Stephen W. Lang

    2011-05-27

    This project was focused on the development of tools for the automatic configuration of signal processing systems. The goal is to develop tools that will be useful in a variety of Government and commercial areas and useable by people who are not signal processing experts. In order to get the most benefit from signal processing techniques, deep technical expertise is often required in order to select appropriate algorithms, combine them into a processing chain, and tune algorithm parameters for best performance on a specific problem. Therefore a significant benefit would result from the assembly of a toolbox of processing algorithms that has been selected for their effectiveness in a group of related problem areas, along with the means to allow people who are not signal processing experts to reliably select, combine, and tune these algorithms to solve specific problems. Defining a vocabulary for problem domain experts that is sufficiently expressive to drive the configuration of signal processing functions will allow the expertise of signal processing experts to be captured in rules for automated configuration. In order to test the feasibility of this approach, we addressed a lightning classification problem, which was proposed by DOE as a surrogate for problems encountered in nuclear nonproliferation data processing. We coded a toolbox of low-level signal processing algorithms for extracting features of RF waveforms, and demonstrated a prototype tool for screening data. We showed examples of using the tool for expediting the generation of ground-truth metadata, for training a signal recognizer, and for searching for signals with particular characteristics. The public benefits of this approach, if successful, will accrue to Government and commercial activities that face the same general problem - the development of sensor systems for complex environments. It will enable problem domain experts (e.g. analysts) to construct signal and image processing chains without

  16. Agile IT: Thinking in User-Centric Models

    NASA Astrophysics Data System (ADS)

    Margaria, Tiziana; Steffen, Bernhard

    We advocate a new teaching direction for modern CS curricula: extreme model-driven development (XMDD), a new development paradigm designed to continuously involve the customer/application expert throughout the whole systems' life cycle. Based on the `One-Thing Approach', which works by successively enriching and refining one single artifact, system development becomes in essence a user-centric orchestration of intuitive service functionality. XMDD differs radically from classical software development, which, in our opinion is no longer adequate for the bulk of application programming - in particular when it comes to heterogeneous, cross organizational systems which must adapt to rapidly changing market requirements. Thus there is a need for new curricula addressing this model-driven, lightweight, and cooperative development paradigm that puts the user process in the center of the development and the application expert in control of the process evolution.

  17. A Curriculum Study in Data Processing: Curriculum Development.

    ERIC Educational Resources Information Center

    Gloster, Emily D.

    The study describes a curriculum developed to train teachers to teach data processing at the high school, technical/vocational institute, or community college level, and to develop courses for undergraduate and graduate students in the fields of business administration, education, psychology, sociology, and science. A 20-page introduction deals…

  18. Developing a Diagnosis Aiding Ontology Based on Hysteroscopy Image Processing

    NASA Astrophysics Data System (ADS)

    Poulos, Marios; Korfiatis, Nikolaos

    In this paper we describe an ontology design process which will introduce the steps and mechanisms required in order to create and develop an ontology which will be able to represent and describe the contents and attributes of hysteroscopy images, as well as their relationships, thus providing a useful ground for the development of tools related with medical diagnosis from physicians.

  19. An Automated Curriculum Development Process for Navy Technical Training.

    ERIC Educational Resources Information Center

    Cantor, Jeffrey A.

    1988-01-01

    Describes a microcomputer-based program created for the U.S. Navy that automates curriculum development for technical training. Highlights include training program components; analysis and design of instructional materials; systematic support and management of the curriculum development process; software automation; and time and cost savings. (LRW)

  20. Geothermal policy development program: expediting the local geothermal permitting process

    SciTech Connect

    Not Available

    1981-07-01

    For a number of years, concerns have been raised about the length of time and the complexity involved in obtaining required permits in order to develop the geothermal resource at the Geysers. Perhaps the most important factor is jurisdiction. At the Geysers, all three levels of government - local, state, and federal - exercise significant authority over various aspects of geothermal development. In addition, several agencies within each governmental level play an active role in the permitting process. The present study is concerned primarily with the local permitting process, and the ways in which this process could be expedited. This report begins by looking at the local role in the overall permitting process, and then reviews the findings and conclusions that have been reached in other studies of the problem. This is followed by a case study evaluation of recent permitting experience in the four Geysers-Calistoga KGRA counties, and the report concludes by outlining several approaches to expediting the local permitting process.