Science.gov

Sample records for agile manufacturing system

  1. Agile manufacturing prototyping system (AMPS)

    SciTech Connect

    Garcia, P.

    1998-05-09

    The Agile Manufacturing Prototyping System (AMPS) is being integrated at Sandia National Laboratories. AMPS consists of state of the industry flexible manufacturing hardware and software enhanced with Sandia advancements in sensor and model based control; automated programming, assembly and task planning; flexible fixturing; and automated reconfiguration technology. AMPS is focused on the agile production of complex electromechanical parts. It currently includes 7 robots (4 Adept One, 2 Adept 505, 1 Staubli RX90), conveyance equipment, and a collection of process equipment to form a flexible production line capable of assembling a wide range of electromechanical products. This system became operational in September 1995. Additional smart manufacturing processes will be integrated in the future. An automated spray cleaning workcell capable of handling alcohol and similar solvents was added in 1996 as well as parts cleaning and encapsulation equipment, automated deburring, and automated vision inspection stations. Plans for 1997 and out years include adding manufacturing processes for the rapid prototyping of electronic components such as soldering, paste dispensing and pick-and-place hardware.

  2. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  3. Team-based work and work system balance in the context of agile manufacturing.

    PubMed

    Yauch, Charlene A

    2007-01-01

    Manufacturing agility is the ability to prosper in an environment characterized by constant and unpredictable change. The purpose of this paper is to analyze team attributes necessary to facilitate agile manufacturing, and using Balance Theory as a framework, it evaluates the potential positive and negative impacts related to these team attributes that could alter the balance of work system elements and resulting "stress load" experienced by persons working on agile teams. Teams operating within the context of agile manufacturing are characterized as multifunctional, dynamic, cooperative, and virtual. A review of the literature relevant to each of these attributes is provided, as well as suggestions for future research.

  4. Using formal methods to scope performance challenges for Smart Manufacturing Systems: focus on agility

    PubMed Central

    Jung, Kiwook; Morris, KC; Lyons, Kevin W.; Leong, Swee; Cho, Hyunbo

    2016-01-01

    Smart Manufacturing Systems (SMS) need to be agile to adapt to new situations by using detailed, precise, and appropriate data for intelligent decision-making. The intricacy of the relationship of strategic goals to operational performance across the many levels of a manufacturing system inhibits the realization of SMS. This paper proposes a method for identifying what aspects of a manufacturing system should be addressed to respond to changing strategic goals. The method uses standard modeling techniques in specifying a manufacturing system and the relationship between strategic goals and operational performance metrics. Two existing reference models related to manufacturing operations are represented formally and harmonized to support the proposed method. The method is illustrated for a single scenario using agility as a strategic goal. By replicating the proposed method for other strategic goals and with multiple scenarios, a comprehensive set of performance challenges can be identified. PMID:27141209

  5. Using formal methods to scope performance challenges for Smart Manufacturing Systems: focus on agility.

    PubMed

    Jung, Kiwook; Morris, K C; Lyons, Kevin W; Leong, Swee; Cho, Hyunbo

    2015-12-01

    Smart Manufacturing Systems (SMS) need to be agile to adapt to new situations by using detailed, precise, and appropriate data for intelligent decision-making. The intricacy of the relationship of strategic goals to operational performance across the many levels of a manufacturing system inhibits the realization of SMS. This paper proposes a method for identifying what aspects of a manufacturing system should be addressed to respond to changing strategic goals. The method uses standard modeling techniques in specifying a manufacturing system and the relationship between strategic goals and operational performance metrics. Two existing reference models related to manufacturing operations are represented formally and harmonized to support the proposed method. The method is illustrated for a single scenario using agility as a strategic goal. By replicating the proposed method for other strategic goals and with multiple scenarios, a comprehensive set of performance challenges can be identified.

  6. Are Agile and Lean Manufacturing Systems Employing Sustainability, Complexity and Organizational Learning?

    ERIC Educational Resources Information Center

    Flumerfelt, Shannon; Siriban-Manalang, Anna Bella; Kahlen, Franz-Josef

    2012-01-01

    Purpose: This paper aims to peruse theories and practices of agile and lean manufacturing systems to determine whether they employ sustainability, complexity and organizational learning. Design/methodology/approach: The critical review of the comparative operational similarities and difference of the two systems was conducted while the new views…

  7. Test Methods for Robot Agility in Manufacturing

    PubMed Central

    Downs, Anthony; Harrison, William; Schlenoff, Craig

    2017-01-01

    Purpose The paper aims to define and describe test methods and metrics to assess industrial robot system agility in both simulation and in reality. Design/methodology/approach The paper describes test methods and associated quantitative and qualitative metrics for assessing robot system efficiency and effectiveness which can then be used for the assessment of system agility. Findings The paper describes how the test methods were implemented in a simulation environment and real world environment. It also shows how the metrics are measured and assessed as they would be in a future competition. Practical Implications The test methods described in this paper will push forward the state of the art in software agility for manufacturing robots, allowing small and medium manufacturers to better utilize robotic systems. Originality / value The paper fulfills the identified need for standard test methods to measure and allow for improvement in software agility for manufacturing robots. PMID:28203034

  8. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  9. Human factors in agile manufacturing

    SciTech Connect

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  10. Research on rapid agile metrology for manufacturing based on real-time multitask operating system

    NASA Astrophysics Data System (ADS)

    Chen, Jihong; Song, Zhen; Yang, Daoshan; Zhou, Ji; Buckley, Shawn

    1996-10-01

    Rapid agile metrology for manufacturing (RAMM) using multiple non-contact sensors is likely to remain a growing trend in manufacturing. High speed inspecting systems for manufacturing is characterized by multitasks implemented in parallel and real-time events which occur simultaneously. In this paper, we introduce a real-time operating system into RAMM research. A general task model of a class-based object- oriented technology is proposed. A general multitask frame of a typical RAMM system using OPNet is discussed. Finally, an application example of a machine which inspects parts held on a carrier strip is described. With RTOS and OPNet, this machine can measure two dimensions of the contacts at 300 parts/second.

  11. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that ``competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.`` Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  12. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.'' Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  13. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  14. Agile manufacturing: The factory of the future

    NASA Technical Reports Server (NTRS)

    Loibl, Joseph M.; Bossieux, Terry A.

    1994-01-01

    The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

  15. Agile manufacturing in Intelligence, Surveillance and Reconnaissance (ISR)

    NASA Astrophysics Data System (ADS)

    DiPadua, Mark; Dalton, George

    2016-05-01

    The objective of the Agile Manufacturing for Intelligence, Surveillance, and Reconnaissance (AMISR) effort is to research, develop, design and build a prototype multi-intelligence (multi-INT), reconfigurable pod demonstrating benefits of agile manufacturing and a modular open systems approach (MOSA) to make podded intelligence, surveillance, and reconnaissance (ISR) capability more affordable and operationally flexible.

  16. Supply chain network design problem for a new market opportunity in an agile manufacturing system

    NASA Astrophysics Data System (ADS)

    Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza

    2012-08-01

    The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.

  17. Agile manufacturing from a statistical perspective

    SciTech Connect

    Easterling, R.G.

    1995-10-01

    The objective of agile manufacturing is to provide the ability to quickly realize high-quality, highly-customized, in-demand products at a cost commensurate with mass production. More broadly, agility in manufacturing, or any other endeavor, is defined as change-proficiency; the ability to thrive in an environment of unpredictable change. This report discusses the general direction of the agile manufacturing initiative, including research programs at the National Institute of Standards and Technology (NIST), the Department of Energy, and other government agencies, but focuses on agile manufacturing from a statistical perspective. The role of statistics can be important because agile manufacturing requires the collection and communication of process characterization and capability information, much of which will be data-based. The statistical community should initiate collaborative work in this important area.

  18. Agile manufacturing concepts and opportunities in ceramics

    SciTech Connect

    Booth, C.L.; Harmer, M.P.

    1995-08-01

    In 1991 Lehigh University facilitated seminars over a period of 8 months to define manufacturing needs for the 21st century. They concluded that the future will be characterized by rapid changes in technology advances, customer demands, and shifts in market dynamics and coined the term {open_quotes}Agile Manufacturing{close_quotes}. Agile manufacturing refers to the ability to thrive in an environment of constant unpredictable change. Market opportunities are attacked by partnering to form virtual firms to dynamically obtain the required skills for each product opportunity. This paper will describe and compare agile vs. traditional concepts of organization & structure, management policy and ethics, employee environment, product focus, information, and paradigm shift. Examples of agile manufacturing applied to ceramic materials will be presented.

  19. Parallel optimization methods for agile manufacturing

    SciTech Connect

    Meza, J.C.; Moen, C.D.; Plantenga, T.D.; Spence, P.A.; Tong, C.H.; Hendrickson, B.A.; Leland, R.W.; Reese, G.M.

    1997-08-01

    The rapid and optimal design of new goods is essential for meeting national objectives in advanced manufacturing. Currently almost all manufacturing procedures involve the determination of some optimal design parameters. This process is iterative in nature and because it is usually done manually it can be expensive and time consuming. This report describes the results of an LDRD, the goal of which was to develop optimization algorithms and software tools that will enable automated design thereby allowing for agile manufacturing. Although the design processes vary across industries, many of the mathematical characteristics of the problems are the same, including large-scale, noisy, and non-differentiable functions with nonlinear constraints. This report describes the development of a common set of optimization tools using object-oriented programming techniques that can be applied to these types of problems. The authors give examples of several applications that are representative of design problems including an inverse scattering problem, a vibration isolation problem, a system identification problem for the correlation of finite element models with test data and the control of a chemical vapor deposition reactor furnace. Because the function evaluations are computationally expensive, they emphasize algorithms that can be adapted to parallel computers.

  20. Agile Manufacturing Development of Castings

    DTIC Science & Technology

    2007-11-02

    Consortium was tasked by GE Transportation Systems (GETS) with development of the IFE, a complex ductile iron casting for a commercial loco- motive that... ductile iron foundry with this tooling, it was clear that castings with acceptable quality could not be made. These castings were on the GE...requirements. Therefore, the design specifies a thin - walled casting with complex structures and the requirements demand tight dimensional tolerances and

  1. Planning and scheduling for agile manufacturers: The Pantex Process Model

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Tumquist, M.A.

    1998-02-01

    Effective use of resources that are shared among multiple products or processes is critical for agile manufacturing. This paper describes the development and implementation of a computerized model to support production planning in a complex manufacturing system at the Pantex Plant, a US Department of Energy facility. The model integrates two different production processes (nuclear weapon disposal and stockpile evaluation) that use common facilities and personnel at the plant. The two production processes are characteristic of flow-shop and job shop operations. The model reflects the interactions of scheduling constraints, material flow constraints, and the availability of required technicians and facilities. Operational results show significant productivity increases from use of the model.

  2. Production planning tools and techniques for agile manufacturing

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Turnquist, M.A.

    1996-10-01

    Effective use of resources shared among multiple products or processes is critical for agile manufacturing. This paper describes development and implementation of a computerized model to support production planning in a complex manufacturing system at Pantex Plant. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints, and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

  3. A review of the Technologies Enabling Agile Manufacturing program

    SciTech Connect

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  4. Inserting Agility in System Development

    DTIC Science & Technology

    2012-07-01

    Agile IT Acquisition, IT Box, Scrum Inserting Agility in System Development Matthew R. Kennedy and Lt Col Dan Ward, USAF With the fast-paced nature...1,700 individuals and 71 countries, found Scrum and eXtreme Programming to be the most widely followed method- ologies (VersionOne, 2007). Other...University http://www.dau.mil 259 Defense ARJ, July 2012, Vol. 19 No. 3 : 249–264 Scrum Scrum is a framework used for project management, which is

  5. The technology base for agile manufacturing

    NASA Technical Reports Server (NTRS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-01-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  6. Function-based integration strategy for an agile manufacturing testbed

    NASA Astrophysics Data System (ADS)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  7. Analysis on critical success factors for agile manufacturing evaluation in original equipment manufacturing industry-an AHP approach

    NASA Astrophysics Data System (ADS)

    Ajay Guru Dev, C.; Senthil Kumar, V. S.

    2016-09-01

    Manufacturing industries are facing challenges in the implementation of agile manufacturing in their products and processes. Agility is widely accepted as a new competitive concept in the manufacturing sector in fulfilling varying customer demand. Thus, evaluation of agile manufacturing in industries has become a necessity. The success of an organisation depends on its ability to manage finding the critical success factors and give them special and continued attention in order to bring about high performance. This paper proposes a set of critical success factors (CSFs) for evaluating agile manufacturing considered appropriate for the manufacturing sector. The analytical hierarchy process (AHP) method is applied for prioritizing the success factors, by summarizing the opinions of experts. It is believed that the proposed CSFs enable and assist manufacturing industries to achieve a higher performance in agile manufacturing so as to increase competitiveness.

  8. Automatic assembly planning and its role in agile manufacturing: A Sandia perspective

    SciTech Connect

    Jones, R.E.; Kaufman, S.G.

    1993-11-01

    Sandia has been studying automatic assembly planning of electromechanical devices for some years, based on an implemented system called Archimedes. Work done to date has focussed on automatic generation of high-level plans, and translation of these plans into robotic control code and workcell layout. More recently, the importance of an assembly planning capability as a design aid has been emphasized, as it could potentially provide early feedback to a designer on the manufacturability of the design. This paper describes the work done on assembly planning to date, plans for extending it, and its applications to agile manufacturing. In particular, we describe an agile manufacturing demonstration project underway at Sandia, and the role the Archimedes assembly planning system will play in it.

  9. Agile manufacturing and constraints management: a strategic perspective

    NASA Astrophysics Data System (ADS)

    Stratton, Roy; Yusuf, Yahaya Y.

    2000-10-01

    The definition of the agile paradigm has proved elusive and is often viewed as a panacea, in contention with more traditional approaches to operations strategy development and Larkin its own methodology and tools. The Theory of Constraints (TOC) is also poorly understood, as it is commonly solely associated with production planning and control systems and bottleneck management. This paper will demonstrate the synergy between these two approaches together with the Theory of Inventive Problem Solving (TRIZ), and establish how the systematic elimination of trade-offs can support the agile paradigm. Whereas agility is often seen as a trade-off free destination, both TOC and TRIZ may be considered to be route finders, as they comprise methodologies that focus on the identification and elimination of the trade-offs that constrain the purposeful improvement of a system, be it organizational or mechanical. This paper will also show how the TOC thinking process may be combined with the TRIZ knowledge based approach and used in breaking contradictions within agile logistics.

  10. Computer vision challenges and technologies for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Molley, Perry A.

    1996-02-01

    applicable to commercial production processes and applications. Computer vision will play a critical role in the new agile production environment for automation of processes such as inspection, assembly, welding, material dispensing and other process control tasks. Although there are many academic and commercial solutions that have been developed, none have had widespread adoption considering the huge potential number of applications that could benefit from this technology. The reason for this slow adoption is that the advantages of computer vision for automation can be a double-edged sword. The benefits can be lost if the vision system requires an inordinate amount of time for reprogramming by a skilled operator to account for different parts, changes in lighting conditions, background clutter, changes in optics, etc. Commercially available solutions typically require an operator to manually program the vision system with features used for the recognition. In a recent survey, we asked a number of commercial manufacturers and machine vision companies the question, 'What prevents machine vision systems from being more useful in factories?' The number one (and unanimous) response was that vision systems require too much skill to set up and program to be cost effective.

  11. Agile robotic edge finishing system research

    SciTech Connect

    Powell, M.A.

    1995-07-01

    This paper describes a new project undertaken by Sandia National Laboratories to develop an agile, automated, high-precision edge finishing system. The project has a two-year duration and was initiated in October, 1994. This project involves re-designing and adding additional capabilities to an existing finishing workcell at Sandia; and developing intelligent methods for automating process definition and for controlling finishing processes. The resulting system will serve as a prototype for systems that will be deployed into highly flexible automated production lines. The production systems will be used to produce a wide variety of products with limited production quantities and quick turnaround requirements. The prototype system is designed to allow programming, process definition, fixture re-configuration, and process verification to be performed off-line for new products. CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) models of the part will be used to assist with the automated process development and process control tasks. To achieve Sandia`s performance goals, the system will be employ advanced path planning, burr prediction expert systems, automated process definition, statistical process models in a process database, and a two-level control scheme using hybrid position-force control and fuzzy logic control. In this paper, we discuss the progress and the planned system development under this project.

  12. Agile

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2013-01-01

    This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.

  13. A Literature Review on the Progression of Agile Manufacturing Paradigm and Its Scope of Application in Pump Industry

    PubMed Central

    Devadasan, S. R.; Sivaram, N. M.

    2015-01-01

    During the recent years, the manufacturing world has been witnessing the application of agile manufacturing paradigm. The literature review reported in this paper was carried out to study this progression. This literature review was carried out in two phases. In the first phase, the literature was reviewed to trace the origin of agile manufacturing paradigm and identify its enablers. Further, during this phase, the applications of agile manufacturing reported in literature arena were reviewed. It was also discernable that certain research works have been initiated to apply agile manufacturing paradigm in pump industry. During the second phase, the researches reported on applying agile manufacturing in pump industry were reviewed. At the end of this review, it was found that so far the implementation of agile manufacturing in pump industry has been examined by the researchers by considering only certain components of pumps. In fact, the holistic implementation of agile manufacturing in the pump industry is yet to be examined by the researchers. In the context of drawing this inference, this paper has been concluded by stating that high scope exists in examining the infusing of agility characteristics in designing and manufacturing of pumps. PMID:26065016

  14. A Literature Review on the Progression of Agile Manufacturing Paradigm and Its Scope of Application in Pump Industry.

    PubMed

    Thilak, V M M; Devadasan, S R; Sivaram, N M

    2015-01-01

    During the recent years, the manufacturing world has been witnessing the application of agile manufacturing paradigm. The literature review reported in this paper was carried out to study this progression. This literature review was carried out in two phases. In the first phase, the literature was reviewed to trace the origin of agile manufacturing paradigm and identify its enablers. Further, during this phase, the applications of agile manufacturing reported in literature arena were reviewed. It was also discernable that certain research works have been initiated to apply agile manufacturing paradigm in pump industry. During the second phase, the researches reported on applying agile manufacturing in pump industry were reviewed. At the end of this review, it was found that so far the implementation of agile manufacturing in pump industry has been examined by the researchers by considering only certain components of pumps. In fact, the holistic implementation of agile manufacturing in the pump industry is yet to be examined by the researchers. In the context of drawing this inference, this paper has been concluded by stating that high scope exists in examining the infusing of agility characteristics in designing and manufacturing of pumps.

  15. Combat Agility Management System (CAMS)

    NASA Technical Reports Server (NTRS)

    Skow, Andrew; Porada, William

    1994-01-01

    The proper management of energy becomes a complex task in fighter aircraft which have high angle of attack (AOA) capability. Maneuvers at high AOA are accompanied by high bleed rates (velocity decrease), a characteristic that is usually undesirable in a typical combat arena. Eidetics has developed under NASA SBIR Phase 1 and NAVAIR SBIR Phase 2 contracts a system which allows a pilot to more easily and effectively manage the trade-off of energy (airspeed or altitude) for turn rate while not imposing hard limits on the high AOA nose pointing capability that can be so important in certain air combat maneuver situations. This has been accomplished by incorporating a two-stage angle of attack limiter into the flight control laws. The first stage sets a limit on AOA to achieve a limit on the maximum bleed rate (selectable) by limiting AOA to values which are dependent on the aircraft attitude and dynamic pressure (or flight path, velocity, and altitude). The second stage sets an AOA limit near the AOA for C(sub l max). One of the principal benefits of such a system is that it enables a low-experience pilot to become much more proficient at managing his energy. The Phase 2 simulation work is complete, and an exploratory flight test on the F-18 HARV is planned for the Fall of 1994 to demonstrate/validate the concept.

  16. Agile: From Software to Mission System

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shirley, Mark H.; Hobart, Sarah Groves

    2016-01-01

    The Resource Prospector (RP) is an in-situ resource utilization (ISRU) technology demonstration mission, designed to search for volatiles at the Lunar South Pole. This is NASA's first near real time tele-operated rover on the Moon. The primary objective is to search for volatiles at one of the Lunar Poles. The combination of short mission duration, a solar powered rover, and the requirement to explore shadowed regions makes for an operationally challenging mission. To maximize efficiency and flexibility in Mission System design and thus to improve the performance and reliability of the resulting Mission System, we are tailoring Agile principles that we have used effectively in ground data system software development and applying those principles to the design of elements of the mission operations system.

  17. Future Research in Agile Systems Development: Applying Open Innovation Principles Within the Agile Organisation

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Morgan, Lorraine

    A particular strength of agile approaches is that they move away from ‘introverted' development and intimately involve the customer in all areas of development, supposedly leading to the development of a more innovative and hence more valuable information system. However, we argue that a single customer representative is too narrow a focus to adopt and that involvement of stakeholders beyond the software development itself is still often quite weak and in some cases non-existent. In response, we argue that current thinking regarding innovation in agile development needs to be extended to include multiple stakeholders outside the business unit. This paper explores the intra-organisational applicability and implications of open innovation in agile systems development. Additionally, it argues for a different perspective of project management that includes collaboration and knowledge-sharing with other business units, customers, partners, and other relevant stakeholders pertinent to the business success of an organisation, thus embracing open innovation principles.

  18. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    ERIC Educational Resources Information Center

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  19. Spectroscopic Investigation of Materials for Frequency Agile Laser Systems.

    DTIC Science & Technology

    1985-01-01

    fluorescence spectra and lifetimes of divalent Rh, Ru, Pt, and Ir ions in alkali halide crystals are measured using pulsed nitrogen laser excitation...AD-Ai5t 73t SPECTROSCOPIC INVESTIGRTION OF MATERIALS FOR FREQUENCY t/ AGILE LASER SYSTEMS(U) OKLAHOMA STATE UNIV STILLWATER DEPT OF PHYSICS R C...INVESTIGATION OF MATERIALS FOR FREQUENCY AGILE LASER SYSTEMS Richard C. Powell, Ph.D. Principal Investigator Department of Physics OKLAHOMA STATE UNIVERSITY

  20. The Automated Assembly Team contributions to the APRIMED Agile Manufacturing Project

    SciTech Connect

    Jones, R.E.; Ames, A.L.; Calton, T.L.

    1995-06-01

    The Automated Assembly Team of the APRIMED Project (abbreviated as A{prime}) consists of two parts: the Archimedes Project, which is an ongoing project developing automated assembly technology, and the A{prime} Robot Team. Archimedes is a second generation assembly planning system that both provides a general high-level assembly sequencing capability and, for a smaller class of products, facilitates automatic programming of a robotic workcell to assemble them. The A{prime} robot team designed, developed, and implemented a flexible robot workcell which served as the automated factory of the A{prime} project. In this document we briefly describe the role of automated assembly planning in agile manufacturing, and specifically describe the contributions of the Archimedes project and the A{prime} robot team to the A{prime} project. We introduce the concepts of the Archimedes automated assembly planning project, and discuss the enhancements to Archimedes which were developed in response to the needs of the A{prime} project. We also present the work of the A{prime} robot team in designing and developing the A{prime} robot workcell, including all tooling and programming to support assembly of the A{prime} discriminator devices. Finally, we discuss the process changes which these technologies have enabled in the A{prime} project.

  1. Modern Enterprise Systems as Enablers of Agile Development

    NASA Astrophysics Data System (ADS)

    Fredriksson, Odd; Ljung, Lennart

    Traditional ES technology and traditional project management methods are supporting and matching each other. But they are not supporting the critical success conditions for ES development in an effective way. Although the findings from one case study of a successful modern ES change project is not strong empirical evidence, we carefully propose that the new modern ES technology is supporting and matching agile project management methods. In other words, it provides the required flexibility which makes it possible to put into practice the agile way of running projects, both for the system supplier and for the customer. In addition, we propose that the combination of modern ES technology and agile project management methods are more appropriate for supporting the realization of critical success conditions for ES development. The main purpose of this chapter is to compare critical success conditions for modern enterprise systems development projects with critical success conditions for agile information systems development projects.

  2. Lean and Agile Precision Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Slocum, Alexander H.

    2002-01-01

    A quasi-kinematic coupling (QKC) is an alignment interface that can be used to make low-cost assemblies with sub-micron precision and/or sealing contact. Unlike kinematic couplings that rely on point contacts formed by mating balls in v-grooves, quasi-kinematic couplings are based on arc contacts formed by mating three balls with three axisymmetric grooves. Though a quasi-kinematic coupling is technically not an exact constraint coupling, proper design of the contacts can produce a weakly over constrained coupling that emulates an exact constraint coupling. This paper covers the practical design of quasi-kinematic couplings and derives the theory that predicts quasi-kinematic coupling stiffness. A metric of over constraint is presented and used to develop recommended practices for minimizing the over constraint in quasi-kinematic couplings. Experimental results are provided to show that quasi-kinematic couplings can provide repeatability (1/4 micron) that is comparable to exact constraint couplings.

  3. Identification, Characterization, and Evaluation Criteria for Systems Engineering Agile Enablers

    DTIC Science & Technology

    2015-01-16

    monitoring communications in social media groups and websites (such as LinkedIn or Facebook groups associated with the Scaled Agile Framework, Lean... Identification , Characterization, and Evaluation Criteria for Systems Engineering Agile Enablers Technical Report SERC-2015-TR-049-1...currently valid OMB control number 1. REPORT DATE 16 JAN 2015 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Identification

  4. The agile alert system for gamma-ray transients

    SciTech Connect

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Fioretti, V.; Chen, A. W.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Pellizzoni, A.; and others

    2014-01-20

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  5. The AGILE Alert System for Gamma-Ray Transients

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Parmiggiani, N.; Fioretti, V.; Chen, A. W.; Vercellone, S.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Beneventano, D.; Argan, A.; Trois, A.; Scalise, E.; Longo, F.; Pellizzoni, A.; Pucella, G.; Colafrancesco, S.; Conforti, V.; Tempesta, P.; Cerone, M.; Sabatini, P.; Annoni, G.; Valentini, G.; Salotti, L.

    2014-01-01

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  6. Lean and Agile Development of the AITS Ground Software System

    NASA Astrophysics Data System (ADS)

    Richters, Mark; Dutruel, Etienne; Mecredy, Nicolas

    2013-08-01

    We present the ongoing development of a new ground software system used for integrating, testing and operating spacecraft. The Advanced Integration and Test Services (AITS) project aims at providing a solution for electrical ground support equipment and mission control systems in future Astrium Space Transportation missions. Traditionally ESA ground or flight software development projects are conducted according to a waterfall-like process as specified in the ECSS-E-40 standard promoted by ESA in the European industry. In AITS a decision was taken to adopt an agile development process. This work could serve as a reference for future ESA software projects willing to apply agile concepts.

  7. Organizational Agility and Complex Enterprise System Innovations: A Mixed Methods Study of the Effects of Enterprise Systems on Organizational Agility

    ERIC Educational Resources Information Center

    Kharabe, Amol T.

    2012-01-01

    Over the last two decades, firms have operated in "increasingly" accelerated "high-velocity" dynamic markets, which require them to become "agile." During the same time frame, firms have increasingly deployed complex enterprise systems--large-scale packaged software "innovations" that integrate and automate…

  8. Integrated product definition representation for agile numerical control applications

    SciTech Connect

    Simons, W.R. Jr.; Brooks, S.L.; Kirk, W.J. III; Brown, C.W.

    1994-11-01

    Realization of agile manufacturing capabilities for a virtual enterprise requires the integration of technology, management, and work force into a coordinated, interdependent system. This paper is focused on technology enabling tools for agile manufacturing within a virtual enterprise specifically relating to Numerical Control (N/C) manufacturing activities and product definition requirements for these activities.

  9. Agile Data Management with the Global Change Information System

    NASA Astrophysics Data System (ADS)

    Duggan, B.; Aulenbach, S.; Tilmes, C.; Goldstein, J.

    2013-12-01

    We describe experiences applying agile software development techniques to the realm of data management during the development of the Global Change Information System (GCIS), a web service and API for authoritative global change information under development by the US Global Change Research Program. Some of the challenges during system design and implementation have been : (1) balancing the need for a rigorous mechanism for ensuring information quality with the realities of large data sets whose contents are often in flux, (2) utilizing existing data to inform decisions about the scope and nature of new data, and (3) continuously incorporating new knowledge and concepts into a relational data model. The workflow for managing the content of the system has much in common with the development of the system itself. We examine various aspects of agile software development and discuss whether or how we have been able to use them for data curation as well as software development.

  10. Clustering-based urbanisation to improve enterprise information systems agility

    NASA Astrophysics Data System (ADS)

    Imache, Rabah; Izza, Said; Ahmed-Nacer, Mohamed

    2015-11-01

    Enterprises are daily facing pressures to demonstrate their ability to adapt quickly to the unpredictable changes of their dynamic in terms of technology, social, legislative, competitiveness and globalisation. Thus, to ensure its place in this hard context, enterprise must always be agile and must ensure its sustainability by a continuous improvement of its information system (IS). Therefore, the agility of enterprise information systems (EISs) can be considered today as a primary objective of any enterprise. One way of achieving this objective is by the urbanisation of the EIS in the context of continuous improvement to make it a real asset servicing enterprise strategy. This paper investigates the benefits of EISs urbanisation based on clustering techniques as a driver for agility production and/or improvement to help managers and IT management departments to improve continuously the performance of the enterprise and make appropriate decisions in the scope of the enterprise objectives and strategy. This approach is applied to the urbanisation of a tour operator EIS.

  11. Planning, Estimating, and Monitoring Progress in Agile Systems Development Environments

    DTIC Science & Technology

    2010-04-01

    Jilemanifesto.orgf Nt:JRJ’HRDP GRUMMAN Agile Terminology Term Definition P d B kl R i /U S i b l dro uct ac og equ rements ser tor es to e comp ete Iteration...Marion, McKelvey, & Uhl- Bien . (2007). Leadership Quarterly, 18(4), 298-318. Agile Development Practices Agile Project Management with Scrum Ken Schwaber

  12. 78 FR 64019 - Manufacturer of Controlled Substances; Notice of Registration; Agilent Technologies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... By Notice dated May 24, 2013, and published in the Federal Register on June 4, 2013, 78 FR 33441, Agilent Technologies, 25200 Commercentre Drive, Lake Forest, California 92630-8810, made application...

  13. TEAM (Technologies Enabling Agile Manufacturing) macro planner requirements guide: Version 1.0

    SciTech Connect

    1995-03-28

    The Macro Planner will provide required resource identities, bill of material list, routing sequences and identities of all supporting information to the Shop Floor Control System to enable the actual manufacturing activities. The Macro Planner must also collect manufacturing performance data from the shop floor to effectively measure the plan`s performance. The critical feedback will be evaluated during closure of the business cycle and provide the metrics on cost and quality to the planning function. This document is intended to describe the requirements for a Macro Planner system which supports the above environment. The Macro planner should progress to a logically, rule driven processor to automate major portions of the planning cycle. It should do the following: support concurrent product/process design; define a globally optimized manufacturing plan for realization of product; compile a complete manufacturing plan script (routing and operational detail documentation); be based on 3-D CAD models imported via STEP standards; and define an Enterprise Resource Base that maps manufacturing capabilities to component features.

  14. Manufacturing information system

    NASA Astrophysics Data System (ADS)

    Allen, D. K.; Smith, P. R.; Smart, M. J.

    1983-12-01

    The size and cost of manufacturing equipment has made it extremely difficult to perform realistic modeling and simulation of the manufacturing process in university research laboratories. Likewise the size and cost factors, coupled with many uncontrolled variables of the production situation has even made it difficult to perform adequate manufacturing research in the industrial setting. Only the largest companies can afford manufacturing research laboratories; research results are often held proprietary and seldom find their way into the university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development of miniature prototype equipment suitable for use in an integrated CAD/CAM Laboratory. The equipment being developed is capable of actually performing production operations (e.g. drilling, milling, turning, punching, etc.) on metallic and non-metallic workpieces. The integrated CAD/CAM Mini-Lab is integrating high resolution, computer graphics, parametric design, parametric N/C parts programmings, CNC machine control, automated storage and retrieval, with robotics materials handling. The availability of miniature CAD/CAM laboratory equipment will provide the basis for intensive laboratory research on manufacturing information systems.

  15. Agile-Lean Software Engineering (ALSE) Evaluating Kanban in Systems Engineering

    DTIC Science & Technology

    2013-03-06

    Agile-Lean Software Engineering (ALSE) Evaluating Kanban in Systems Engineering A013 - Final Technical Report SERC-2013-TR-022-2 March 6, 2013...06 MAR 2013 2. REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE Agile-Lean Software Engineering (ALSE) Evaluating...engineering (SE). Such approaches have been seen to be valuable in software system development. In particular, the research focuses on SE where rapid response

  16. Creativity in Agile Systems Development: A Literature Review

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Wang, Xiaofeng; Fitzgerald, Brian

    Proponents of agile methods claim that enabling, fostering and driving creativity is the key motivation that differentiates agile methods from their more traditional, beauraucratic counterparts. However, there is very little rigorous research to support this claim. Like most of their predecessors, the development and promotion of these methods has been almost entirely driven by practitioners and consultants, with little objective validation from the research community. This lack of validation is particularly relevant for SMEs, given that many of their project teams typify the environment to which agile methods are most suited i.e. small, co-located teams with diverse, blended skills in unstructured, sometimes even chaotic surroundings. This paper uses creativity theory as a lens to review the current agile method literature to understand exactly how much we know about the extent to which creativity actually occurs in these agile environments. The study reveals many gaps and conflict of opinion in the body of knowledge in its current state and identifies many avenues for further research.

  17. MiniMAX: miniature, mobile, agile, x-ray system

    NASA Astrophysics Data System (ADS)

    Watson, Scott A.; Cunningham, Gwynneth; Gonzales, Samuel

    2012-06-01

    We present a unique, lightweight, compact, low-cost, x-ray imager: MiniMAX (Miniature, Mobile, Agile, X-ray). This system, which exploits the best aspects of Computed Radiography (CR) and Digital Radiography (DR) technology, weighs less than 6lbs, fits into a 6" diameter x 16" long carbon-fiber tube, and is constructed almost entirely from offthe- shelf components. MiniMAX is suitable for use in weld inspection, archaeology, homeland security, and veterinary medicine. While quantum limited for MeV radiography, the quantum-efficiency is too low for routine medical use. Formats include: 4"x6", 8"x12", or 16"x24" and can be readily displayed on the camera back, using a pocket projector, or on a tablet computer. In contrast to a conventional, flying-spot scanner, MiniMAX records a photostimulated image from the entire phosphor at once using a bright, red LED flash filtered through an extremely efficient (OD>9) dichroic filter.

  18. AGILE/GRID Science Alert Monitoring System: The Workflow and the Crab Flare Case

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Conforti, V.; Parmiggiani, N.

    2013-10-01

    During the first five years of the AGILE mission we have observed many gamma-ray transients of Galactic and extragalactic origin. A fast reaction to unexpected transient events is a crucial part of the AGILE monitoring program, because the follow-up of astrophysical transients is a key point for this space mission. We present the workflow and the software developed by the AGILE Team to perform the automatic analysis for the detection of gamma-ray transients. In addition, an App for iPhone will be released enabling the Team to access the monitoring system through mobile phones. In 2010 September the science alert monitoring system presented in this paper recorded a transient phenomena from the Crab Nebula, generating an automated alert sent via email and SMS two hours after the end of an AGILE satellite orbit, i.e. two hours after the Crab flare itself: for this discovery AGILE won the 2012 Bruno Rossi prize. The design of this alert system is maximized to reach the maximum speed, and in this, as in many other cases, AGILE has demonstrated that the reaction speed of the monitoring system is crucial for the scientific return of the mission.

  19. Agility Quotient (AQ)

    DTIC Science & Technology

    2014-06-01

    system?s Agility IQ ?? and ?What is the requisite amount of Agility that is required?? This paper suggests a way forward and illustrates it, in the...answer two questions. “How can we measure a system’s Agility IQ ?” and “What is the requisite amount of Agility that is required?” This paper...agility is worth our attention. AQ can be patterned after the Intelligence Quotient ( IQ ). IQ is a score that is associated with educational potential

  20. Manufacturing Information System.

    DTIC Science & Technology

    1983-12-22

    university classroom to aid in education and training of new manufacturing engineers. It is the purpose for this research to continue the development...PAUL R. SMITH 175 South 600 East #1 Provo, Utah 84601 (801) 377-8068 CAREER OBJECTIVE: Manufacturing Engineer using skills in development and...university classroom to aid in the education and train- ing of new manufacturing engineers. , . o i . o ., . . . . . - ,’ o . -2- 1.2. NEED There is a current

  1. Architecture and performances of the AGILE Telemetry Preprocessing System (TMPPS)

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Lazzarotto, F.; Di Cocco, G.; Fuschino, F.; Tavani, M.

    2008-07-01

    AGILE is an Italian Space Agency (ASI) satellite dedicated to high energy Astrophysics. It was launched successfully on 23 April 2007, and it has been operated by the AGILE Ground Segment, consisting of the Ground Station located in Malindi (Kenia), the Mission Operations Centre (MOC) and the AGILE Data Centre (ADC) established in Italy, at Telespazio in Fucino and at the ASI Science Data Centre (ASDC) in Frascati respectively. Due to the low equatorial orbit at ~ 530 Km. with inclination angle of ~ 2.5°, the satellite passes over the Ground Station every ~ 100'. During the visibility period of . ~ 12', the Telemetry (TM) is down linked through two separated virtual channels, VC0 and VC1. The former is devoted to the real time TM generated during the pass at the average rate of 50 Kbit/s and is directly relayed to the Control Centre. The latter is used to downlink TM data collected on the satellite on-board mass memory during the non visibility period. This generates at the Ground Station a raw TM file of up to 37 MByte. Within 20' after the end of the contact, both the real time and mass memory TM arrive at ADC through the dedicated VPN ASINet. Here they are automatically detected and ingested by the TMPPS pipeline in less than 5 minutes. The TMPPS archives each TM file and sorts its packets into one stream for each of the different TM layout. Each stream is processed in parallel in order to unpack the various telemetry field and archive them into suitable FITS files. Each operation is tracked into a MySQL data base which interfaces the TMPPS pipeline to the rest of the scientific pipeline running at ADC. In this paper the architecture and the performance of the TMPPS will be described and discussed.

  2. Agile and Lean Systems Engineering: Kanban in Systems Engineering

    DTIC Science & Technology

    2011-12-31

    0171 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Turner /Dr. Richard 5d. PROJECT NUMBER RT 35 5e. TASK NUMBER DO1 TTO2 5f. WORK...unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This research project evaluates the use of on-demand (pull or kanban) scheduling approaches in systems...engineering. In particular, this initial phase focuses on systems engineering where rapid response software development projects incrementally evolve

  3. Agile Mythbusting

    DTIC Science & Technology

    2015-01-01

    does not fit all Scrum : The most adopted Agile method Scaling Agile Methods: Going beyond the team level methods Challenges to Agile Adoption: What’s...Arsenal Lapham, Wrubel Jan 2015 © 2015 Carnegie Mellon University. Myth: You Must Choose Agile or Waterfall – you can’t do both What about “water- scrum ...used in multiple environments, including DoD programs.1 1Start with “Agile EVM in Scrum Projects” from AGILE 2006 to get started learning about Agile

  4. Towards Human Centred Manufacturing Systems in the Next Generation

    NASA Astrophysics Data System (ADS)

    Anezaki, Takashi; Hata, Seiji

    Nowadays agile market is in common, and the fundamental technology supporting next-generation production system requires further development of machine and information technologies to establish “human friendly technology" and a bridging of these technologies together. IMS-HUTOP project proposes a new product life cycle that respects the human nature of individuals, and establishes the elemental technologies necessary for acquiring, modelling and evaluating various human factors in an effort to achieve the HUTOP cycle. In this paper we propose a human centred and human friendly manufacturing system, which has been proposed in the IMS-HUTOP project.

  5. Towards Manufacturing/Distribution Systems in the Next Generation

    NASA Astrophysics Data System (ADS)

    Koshimizu, Hiroyasu; Kaihara, Toshiya; Sawada, Hiroyuki

    Nowadays agile market is in common, and the fundamental technology supporting next-generation production system requires further development of machine and information technologies to establish “human technology” and a bridging of these technologies together. IMS-HUTOP project proposes a new product life cycle that respects the human nature of individuals, and establishes the elemental technologies necessary for acquiring, modelling and evaluating various human factors in an effort to achieve the HUTOP cycle. In this paper we propose a human centred KANSEI manufacturing system, which has been proposed in the IMS-HUTOP project with 5 work packages.

  6. Integrating Low-Cost Rapid Usability Testing into Agile System Development of Healthcare IT: A Methodological Perspective.

    PubMed

    Kushniruk, Andre W; Borycki, Elizabeth M

    2015-01-01

    The development of more usable and effective healthcare information systems has become a critical issue. In the software industry methodologies such as agile and iterative development processes have emerged to lead to more effective and usable systems. These approaches highlight focusing on user needs and promoting iterative and flexible development practices. Evaluation and testing of iterative agile development cycles is considered an important part of the agile methodology and iterative processes for system design and re-design. However, the issue of how to effectively integrate usability testing methods into rapid and flexible agile design cycles has remained to be fully explored. In this paper we describe our application of an approach known as low-cost rapid usability testing as it has been applied within agile system development in healthcare. The advantages of the integrative approach are described, along with current methodological considerations.

  7. TEAM (Technologies Enabling Agile Manufacturing) shop floor control requirements guide: Version 1.0

    SciTech Connect

    1995-03-28

    TEAM will create a shop floor control system (SFC) to link the pre-production planning to shop floor execution. SFC must meet the requirements of a multi-facility corporation, where control must be maintained between co-located facilities down to individual workstations within each facility. SFC must also meet the requirements of a small corporation, where there may only be one small facility. A hierarchical architecture is required to meet these diverse needs. The hierarchy contains the following levels: Enterprise, Factory, Cell, Station, and Equipment. SFC is focused on the top three levels. Each level of the hierarchy is divided into three basic functions: Scheduler, Dispatcher, and Monitor. The requirements of each function depend on the hierarchical level in which it is to be used. For example, the scheduler at the Enterprise level must allocate production to individual factories and assign due-dates; the scheduler at the Cell level must provide detailed start and stop times of individual operations. Finally the system shall have the following features: distributed and open-architecture. Open architecture software is required in order that the appropriate technology be used at each level of the SFC hierarchy, and even at different instances within the same hierarchical level (for example, Factory A uses discrete-event simulation scheduling software, and Factory B uses an optimization-based scheduler). A distributed implementation is required to reduce the computational burden of the overall system, and allow for localized control. A distributed, open-architecture implementation will also require standards for communication between hierarchical levels.

  8. The AIV quick look and health monitoring system of the AGILE payload

    NASA Astrophysics Data System (ADS)

    Bulgarelli, Andrea; Gianotti, Fulvio; Trifoglio, Massimo; Di Cocco, Guido; Tavani, Marco; Marisaldi, Martino

    2008-07-01

    AGILE is an ASI (Italian Space Agency) Small Scientific Mission dedicated to high-energy astrophysics which was launched on April 23 2007 from Satish Dawan Space Centre, India) on a PSLV-C8 rocket. The AGILE Payload is composed of three instruments: a Tungsten-Silicon Tracker designed to detect and image photons in the 30 MeV-50 GeV energy band, an X-ray imager called SuperAGILE that works in the 18-60 keV energy band, and a Minicalorimeter that detects gamma-rays or particle energy deposits between 300~keV and 200~MeV. The instrument is surrounded by an anti-coincidence (AC) system. We have developed a set of Quick Look software tools in the framework of the Test Equipment (TE) and the Electrical Ground Support Equipment (EGSE. This s/w is required in order to support all the assembly, integration and verification (AIV) activities to be carried out for the AGILE mission, from data handling unit level to payload integrated level, calibration campaign, launch campaign and in-orbit commissioning. These software tools have enabled us to test the engineering performance and to perform a health check of the Payload during the various phases. We have used an incremental development approach and a common framework to rapidly adapt our software to the different requirements of the various phases.

  9. Advanced Manufacturing Industry Study Group Paper "Getting Agile & Fast - A 2003 Overture to Pre-Eminence"

    DTIC Science & Technology

    2003-01-01

    company that we visited leveraged IT to achieve ‘six sigma’ quality in isolated lean manufacturing assembly lines or manufacturing cells. Even in the...color you want, as long as it’s black.” In this environment, the best manufacturers use lean manufacturing processes to postpone procurement and... lean manufacturing processes, and demand-driven production. Manufacturers are actively rooting out waste in their manufacturing processes and

  10. Empirical Agility

    DTIC Science & Technology

    2014-06-01

    documented the fact that Unmanned Aerial Vehicles (now more commonly called drones ) added substantially to the quality of surveillance, resulting in better...Battalions. CACI Inc.-Federal, Arlington, Virginia. 1977. DTIC Accession Number ADA123481. Olmstead, Joseph A., B. Leon Elder, and John M...greater agility – Drones improved agility in ground and air operations – Nelson’s C2 at Trafalgar demonstrated agility. Theater Level C2 During WW II

  11. An Agile Systems Engineering Process: The Missing Link?

    DTIC Science & Technology

    2011-05-01

    Quality Management Systems. 2008. 26. Standardization, International Organization for. “ ISO 12207.” Software Life Cycle Processes. 2008. 27. Software...has a num- ber of standards available such as ISO 12207, ISO 9001 and the Capability Maturity Model Integrated (CMMI®) [24,25,26]. The CMMI was a...Of The Air. Life Cycle Systems Engineering. 2007 24. CMMI® for Development, Version 1.2. Pittsburgh: Carnegie Mellon University, 2006. 25. “ ISO 9001

  12. Frequency agile laser safety & hazard analysis for the Sandia Remote Sensing System LIDAR.

    SciTech Connect

    Augustoni, Arnold L.

    2009-05-01

    A laser safety and hazard analysis was performed for the Raytheon Frequency Agile Laser (FAL) to be used with the Sandia Remote Sensing System (SRSS) B-70 Trailer based on the 2007 version of the American National Standards Institute's (ANSI) Standard 136.1, for Safe Use of Lasers and the 2005 version of the ANSI Standard Z136.6, for Safe Use of Lasers Outdoors. The B-70 SRSS LIDAR system is a portable platform, which is used to perform laser interaction experiments and tests at various national test sites.

  13. Agile hardware and software systems engineering for critical military space applications

    NASA Astrophysics Data System (ADS)

    Huang, Philip M.; Knuth, Andrew A.; Krueger, Robert O.; Garrison-Darrin, Margaret A.

    2012-06-01

    The Multi Mission Bus Demonstrator (MBD) is a successful demonstration of agile program management and system engineering in a high risk technology application where utilizing and implementing new, untraditional development strategies were necessary. MBD produced two fully functioning spacecraft for a military/DOD application in a record breaking time frame and at dramatically reduced costs. This paper discloses the adaptation and application of concepts developed in agile software engineering to hardware product and system development for critical military applications. This challenging spacecraft did not use existing key technology (heritage hardware) and created a large paradigm shift from traditional spacecraft development. The insertion of new technologies and methods in space hardware has long been a problem due to long build times, the desire to use heritage hardware, and lack of effective process. The role of momentum in the innovative process can be exploited to tackle ongoing technology disruptions and allowing risk interactions to be mitigated in a disciplined manner. Examples of how these concepts were used during the MBD program will be delineated. Maintaining project momentum was essential to assess the constant non recurring technological challenges which needed to be retired rapidly from the engineering risk liens. Development never slowed due to tactical assessment of the hardware with the adoption of the SCRUM technique. We adapted this concept as a representation of mitigation of technical risk while allowing for design freeze later in the program's development cycle. By using Agile Systems Engineering and Management techniques which enabled decisive action, the product development momentum effectively was used to produce two novel space vehicles in a fraction of time with dramatically reduced cost.

  14. Advanced optical manufacturing digital integrated system

    NASA Astrophysics Data System (ADS)

    Tao, Yizheng; Li, Xinglan; Li, Wei; Tang, Dingyong

    2012-10-01

    It is necessarily to adapt development of advanced optical manufacturing technology with modern science technology development. To solved these problems which low of ration, ratio of finished product, repetition, consistent in big size and high precision in advanced optical component manufacturing. Applied business driven and method of Rational Unified Process, this paper has researched advanced optical manufacturing process flow, requirement of Advanced Optical Manufacturing integrated System, and put forward architecture and key technology of it. Designed Optical component core and Manufacturing process driven of Advanced Optical Manufacturing Digital Integrated System. the result displayed effective well, realized dynamic planning Manufacturing process, information integration improved ratio of production manufactory.

  15. Ground System Architectures Workshop GMSEC SERVICES SUITE (GSS): an Agile Development Story

    NASA Technical Reports Server (NTRS)

    Ly, Vuong

    2017-01-01

    The GMSEC (Goddard Mission Services Evolution Center) Services Suite (GSS) is a collection of tools and software services along with a robust customizable web-based portal that enables the user to capture, monitor, report, and analyze system-wide GMSEC data. Given our plug-and-play architecture and the needs for rapid system development, we opted to follow the Scrum Agile Methodology for software development. Being one of the first few projects to implement the Agile methodology at NASA GSFC, in this presentation we will present our approaches, tools, successes, and challenges in implementing this methodology. The GMSEC architecture provides a scalable, extensible ground and flight system for existing and future missions. GMSEC comes with a robust Application Programming Interface (GMSEC API) and a core set of Java-based GMSEC components that facilitate the development of a GMSEC-based ground system. Over the past few years, we have seen an upbeat in the number of customers who are moving from a native desktop application environment to a web based environment particularly for data monitoring and analysis. We also see a need to provide separation of the business logic from the GUI display for our Java-based components and also to consolidate all the GUI displays into one interface. This combination of separation and consolidation brings immediate value to a GMSEC-based ground system through increased ease of data access via a uniform interface, built-in security measures, centralized configuration management, and ease of feature extensibility.

  16. Network architecture design of an agile sensing system with sandwich wireless sensor nodes

    NASA Astrophysics Data System (ADS)

    Dorvash, S.; Li, X.; Pakzad, S.; Cheng, L.

    2012-04-01

    Wireless sensor network (WSN) is recently emerged as a powerful tool in the structural health monitoring (SHM). Due to the limitations of wireless channel capacity and the heavy data traffic, the control on the network is usually not real time. On the other hand, many SHM applications require quick response when unexpected events, such as earthquake, happen. Realizing the need to have an agile monitoring system, an approach, called sandwich node, was proposed. Sandwich is a design of complex sensor node where two Imote2 nodes are connected with each other to enhance the capabilities of the sensing units. The extra channel and processing power, added into the nodes, enable agile responses of the sensing network, particularly in interrupting the network and altering the undergoing tasks for burst events. This paper presents the design of a testbed for examination of the performance of wireless sandwich nodes in a network. The designed elements of the network are the software architecture of remote and local nodes, and the triggering strategies for coordinating the sensing units. The performance of the designed network is evaluated through its implementation in a monitoring test in the laboratory. For both original Imote2 and the sandwich node, the response time is estimated. The results show that the sandwich node is an efficient solution to the collision issue in existing interrupt approaches and the latency in dense wireless sensor networks.

  17. Formal Approach For Resilient Reachability based on End-System Route Agility

    SciTech Connect

    Rauf, Usman; Gillani, Fida; Al-Shaer, Ehab; Halappanavar, Mahantesh; Chatterjee, Samrat; Oehmen, Christopher S.

    2016-12-28

    The deterministic nature of existing routing protocols has resulted into an ossified Internet with static and predictable network routes. This gives persistent attackers (e.g. eavesdroppers and DDoS attackers) plenty of time to study the network and identify the vulnerable links (critical) to plan a devastating and stealthy attack. Recently, route mutation approaches have been proposed to address such issues. However, these approaches incur significantly high overhead and depend upon the availability of disjoint routes in the network, which inherently limit their use for mission critical services. To cope with these issues, we extend the current routing architecture to consider end-hosts as routing elements, and present a formal method based agile defense mechanism to increase resiliency of the existing cyber infrastructure. The major contributions of this paper include: (1) formalization of efficient and resilient End to End (E2E) reachability problem as a constraint satisfaction problem, which identifies the potential end-hosts to reach a destination while satisfying resilience and QoS constraints, (2) design and implementation of a novel decentralized End Point Route Mutation (EPRM) protocol, and (3) design and implementation of planning algorithm to minimize the overlap between multiple flows, for the sake of maximizing the agility in the system. Our implementation and evaluation validates the correctness, effectiveness and scalability of the proposed approach.

  18. Focused Logistics: Putting Agility in Agile Logistics

    DTIC Science & Technology

    2011-05-19

    envisioned an agile and adaptable logstics system built around common situational understanding.5 The Focused Logistics concept specified the requirement to...the tracking of resources moving through the TD network. As a result, 112 Ibid, 20. 113 Ibid, 18-20. 39 distribution centers tagged inbound

  19. Agile automated vision

    NASA Astrophysics Data System (ADS)

    Fandrich, Juergen; Schmitt, Lorenz A.

    1994-11-01

    The microelectronic industry is a protagonist in driving automated vision to new paradigms. Today semiconductor manufacturers use vision systems quite frequently in their fabs in the front-end process. In fact, the process depends on reliable image processing systems. In the back-end process, where ICs are assembled and packaged, today vision systems are only partly used. But in the next years automated vision will become compulsory for the back-end process as well. Vision will be fully integrated into every IC package production machine to increase yields and reduce costs. Modem high-speed material processing requires dedicated and efficient concepts in image processing. But the integration of various equipment in a production plant leads to unifying handling of data flow and interfaces. Only agile vision systems can act with these contradictions: fast, reliable, adaptable, scalable and comprehensive. A powerful hardware platform is a unneglectable requirement for the use of advanced and reliable, but unfortunately computing intensive image processing algorithms. The massively parallel SIMD hardware product LANTERN/VME supplies a powerful platform for existing and new functionality. LANTERN/VME is used with a new optical sensor for IC package lead inspection. This is done in 3D, including horizontal and coplanarity inspection. The appropriate software is designed for lead inspection, alignment and control tasks in IC package production and handling equipment, like Trim&Form, Tape&Reel and Pick&Place machines.

  20. Another Program Simulates A Modular Manufacturing System

    NASA Technical Reports Server (NTRS)

    Schroer, Bernard J.; Wang, Jian

    1996-01-01

    SSE5 computer program provides simulation environment for modeling manufacturing systems containing relatively small numbers of stations and operators. Designed to simulate manufacturing of apparel, also used in other manufacturing domains. Valuable for small or medium-size firms, including those lacking expertise to develop detailed mathematical models or have only minimal knowledge in describing manufacturing systems and in analyzing results of simulations on mathematical models. Two other programs available bundled together as SSE (MFS-26245). Each program models slightly different manufacturing scenario. Written in Turbo C v2.0 for IBM PC-series and compatible computers running MS-DOS and successfully compiled using Turbo C++ v3.0.

  1. Cellular Manufacturing Internet Performance Support System

    SciTech Connect

    Bohley, M.C.; Schwartz, M.E.

    1998-03-04

    The objective of this project was to develop an Internet-based electronic performance support system (EPSS) for cellular manufacturing providing hardware/software specifications, process descriptions, estimated cost savings, manufacturing simulations, training information, and service resources for government and industry users of Cincinnati Milacron machine tools and products. AlliedSignal Federal Manufacturing and Technologies (ASFM and T) used expertise in the areas of Internet design and multimedia creation to develop a performance support system (PSS) for the Internet with assistance from CM's subject matter experts from engineering, manufacturing, and technical support. Reference information was both created and re-purposed from other existing formats, then made available on the Internet. On-line references on cellular manufacturing operations include: definitions of cells and cellular manufacturing; illustrations on how cellular manufacturing improves part throughput, resource utilization, part quality, and manufacturing flexibility; illustrations on how cellular manufacturing reduces labor and overhead costs; identification of critical factors driving decisions toward cellular manufacturing; a method for identifying process improvement areas using cellular manufacturing; a method for customizing the size of cells for a specific site; a simulation for making a part using cellular manufacturing technology; and a glossary of terms and concepts.

  2. Optimization of space manufacturing systems

    NASA Technical Reports Server (NTRS)

    Akin, D. L.

    1979-01-01

    Four separate analyses are detailed: transportation to low earth orbit, orbit-to-orbit optimization, parametric analysis of SPS logistics based on earth and lunar source locations, and an overall program option optimization implemented with linear programming. It is found that smaller vehicles are favored for earth launch, with the current Space Shuttle being right at optimum payload size. Fully reusable launch vehicles represent a savings of 50% over the Space Shuttle; increased reliability with less maintenance could further double the savings. An optimization of orbit-to-orbit propulsion systems using lunar oxygen for propellants shows that ion propulsion is preferable by a 3:1 cost margin over a mass driver reaction engine at optimum values; however, ion engines cannot yet operate in the lower exhaust velocity range where the optimum lies, and total program costs between the two systems are ambiguous. Heavier payloads favor the use of a MDRE. A parametric model of a space manufacturing facility is proposed, and used to analyze recurring costs, total costs, and net present value discounted cash flows. Parameters studied include productivity, effects of discounting, materials source tradeoffs, economic viability of closed-cycle habitats, and effects of varying degrees of nonterrestrial SPS materials needed from earth. Finally, candidate optimal scenarios are chosen, and implemented in a linear program with external constraints in order to arrive at an optimum blend of SPS production strategies in order to maximize returns.

  3. Literature Review on Dynamic Cellular Manufacturing System

    NASA Astrophysics Data System (ADS)

    Nouri Houshyar, A.; Leman, Z.; Pakzad Moghadam, H.; Ariffin, M. K. A. M.; Ismail, N.; Iranmanesh, H.

    2014-06-01

    In previous decades, manufacturers faced a lot of challenges because of globalization and high competition in markets. These problems arise from shortening product life cycle, rapid variation in demand of products, and also rapid changes in manufcaturing technologies. Nowadays most manufacturing companies expend considerable attention for improving flexibility and responsiveness in order to overcome these kinds of problems and also meet customer's needs. By considering the trend toward the shorter product life cycle, the manufacturing environment is towards manufacturing a wide variety of parts in small batches [1]. One of the major techniques which are applied for improving manufacturing competitiveness is Cellular Manufacturing System (CMS). CMS is type of manufacturing system which tries to combine flexibility of job shop and also productivity of flow shop. In addition, Dynamic cellular manufacturing system which considers different time periods for the manufacturing system becomes an important topic and attracts a lot of attention to itself. Therefore, this paper made attempt to have a brief review on this issue and focused on all published paper on this subject. Although, this topic gains a lot of attention to itself during these years, none of previous researchers focused on reviewing the literature of that which can be helpful and useful for other researchers who intend to do the research on this topic. Therefore, this paper is the first study which has focused and reviewed the literature of dynamic cellular manufacturing system.

  4. Computer-integrated manufacturing system for OPTICAM

    NASA Astrophysics Data System (ADS)

    Tipps, Joe D., Jr.; Czajkowski, Walter C.

    1992-01-01

    Optical design, engineering, and manufacturing operate as independent entities. Outmoded specifications for material, geometry, tolerances, and mounting add to cost, lead time, and manufacturing complexity of both military and commercial optics. The optics industry maintains outdated stand-alone design, engineering, and manufacturing systems that do not support integration or communications. This single island of technology adds greatly to the final cost of optical systems.

  5. Multi-agent for manufacturing systems optimization

    NASA Astrophysics Data System (ADS)

    Ciortea, E. M.; Tulbure, A.; Huţanu, C.-tin

    2016-08-01

    The paper is meant to be a dynamic approach to optimize manufacturing systems based on multi-agent systems. Multi-agent systems are semiautonomous decision makers and cooperate to optimize the manufacturing process. Increasing production the capacity is achieved by developing, implementing efficient and effective systems from control based on current manufacturing process. The model multi-agent proposed in this paper is based on communication between agents who, based on their mechanisms drive to autonomous decision making. Methods based on multi-agent programming are applied between flexible manufacturing processes and cooperation with agents. Based on multi-agent technology and architecture of intelligent manufacturing can lead to development of strategies for control and optimization of scheduled production resulting from the simulation.

  6. Effectiveness of dynamic rescheduling in agent-based flexible manufacturing systems

    NASA Astrophysics Data System (ADS)

    Saad, Ashraf; Biswas, Gautam; Kawamura, Kazuhiko; Johnson, Eric M.

    1997-12-01

    This work has been developed within the framework of agent- based decentralized scheduling for flexible manufacturing systems. In this framework, all workcells comprising the manufacturing system, and the products to be generated, are modeled via intelligent software agents. These agents interact dynamically using a bidding production reservation (BPRS) scheme, based on the Contract Net Protocol, to devise the production schedule for each product unit. Simulation studies of a job shop have demonstrated the gains in performance achieved by this approach over heuristic dispatching rules commonly used in industry. Manufacturing environments are also prone to operational uncertainties such as variations in processing times and machine breakdowns. In order to cope with these uncertainties, the BPRS algorithm has been extended for dynamic rescheduling to also occur in a fully decentralized manner. The resulting multi-agent rescheduling scheme results in decentralized control of flexible manufacturing systems that are capable of responding dynamically to such operational uncertainties, thereby enhancing the robustness and fault tolerance of the proposed scheduling approach. This paper also presents the effects of the proposed agent-based decentralized scheduling approach on the performance of the underlying flexible manufacturing system under a variety of production and scheduling scenarios, including forward and backward scheduling. Future directions for this work include applying the proposed scheduling approach to other advanced manufacturing areas such as agile and holonic manufacturing.

  7. Waveform agile high-power fiber laser illuminators for directed-energy weapon systems

    NASA Astrophysics Data System (ADS)

    Engin, Doruk; Lu, Wei; Kimpel, Frank; Gupta, Shantanu

    2012-06-01

    A kW-class fiber-amplifier based laser illuminator system at 1030nm is demonstrated. At 125 kHz pulse repetition rate, 1.9mJ energy per pulse (235W average power) is achieved for 100nsec pulses with >72% optical conversion efficiency, and at 250kHz repetition, >350W average power is demonstrated, limited by the available pumps. Excellent agreement is established between the experimental results and dynamic fiber amplifier simulation, for predicting the pulse shape, spectrum and ASE accumulation throughout the fiber-amplifier chain. High pulse-energy, high power fiber-amplifier operation requires careful engineering - minimize ASE content throughout the pre-amplifier stages, use of large mode area gain fiber in the final power stage for effective pulse energy extraction, and pulse pre-shaping to compensate for the laser gain-saturation induced intra-pulse and pulse-pattern dependent distortion. Such optimization using commercially available (VLMA) fibers with core size in the 30-40μm range is estimated to lead to >4mJ pulse energy for 100nsec pulse at 50kHz repetition rate. Such waveform agile high-power, high-energy pulsed fiber laser illuminators at λ=1030nm satisfies requirements for active-tracking/ranging in high-energy laser (HEL) weapon systems, and in uplink laser beacon for deep space communication.

  8. Agile dry etching of compound semiconductors for science-based manufacturing using in-situ process control

    SciTech Connect

    ASHBY,CAROL I.; VAWTER,GREGORY A.; BREILAND,WILLIAM G.; BRUSKAS,LARRY A.; WOODWORTH,JOSEPH R.; HEBNER,GREGORY A.

    2000-02-01

    In-situ optical diagnostics and ion beam diagnostics for plasma-etch and reactive-ion-beam etch (RIBE) tools have been developed and implemented on etch tools in the Compound Semiconductor Research Laboratory (CSRL). The optical diagnostics provide real-time end-point detection during plasma etching of complex thin-film layered structures that require precision etching to stop on a particular layer in the structure. The Monoetch real-time display and analysis program developed with this LDRD displays raw and filtered reflectance signals that enable an etch system operator to stop an etch at the desired depth within the desired layer. The ion beam diagnostics developed with this LDRD will permit routine analysis of critical ion-beam profile characteristics that determine etch uniformity and reproducibility on the RIBE tool.

  9. Agile Metrics: Progress Monitoring of Agile Contractors

    DTIC Science & Technology

    2014-01-01

    can be tailored to leverage the iterative nature of Agile meth- ods. Using optional contract funding lines or indefinite delivery indefinite quantity... naturally created during the execution of the Agile implementation. In the following paragraphs, we identify issues to consider in building an Agile...employing Agile methods [Hartman 2006]. Be prepared to mine and effectively use the metrics data that naturally occur in typical Ag- ile teams. In

  10. Operation of Prisma flexible manufacturing system

    NASA Astrophysics Data System (ADS)

    Schroeder, W.; Rudolph, K.; Mueller, E.

    1985-03-01

    The development of technology and organization in the parts manufacturing taking place in machine construction factories occurs both in job site automation and in process-referred automation. It is characterized by the comprehensive employment of microelectronics which in turn leads to new more highly automated engineering solutions in the areas of manufacturing devices, transport technology and storage technology and manufacturing control. Systems used to process about 850 prismatic individual parts differing in design, differing technologically, and having the maximum dimensions 500 mm x 800 mm x 500 mm are described.

  11. Program Simulates A Modular Manufacturing System

    NASA Technical Reports Server (NTRS)

    Schroer, Bernard J.; Wang, Jian

    1996-01-01

    SSE computer program provides simulation environment for modeling manufacturing systems containing relatively small numbers of stations and operators. Designed to simulate manufacturing of apparel, also used in other manufacturing domains. Excellent for small or medium-size firms including those lacking expertise to develop detailed models or have only minimal knowledge in describing manufacturing systems and in analyzing results of simulations on mathematical models. User does not need to know simulation language to use SSE. Used to design new modules and to evaluate existing modules. Originally written in Turbo C v2.0 for IBM PC-compatible computers running MS-DOS and successfully implemented by use of Turbo C++ v3.0.

  12. Lean and Agile Acquisition and Systems Engineering. A Paradigm Whose Time Has Come

    DTIC Science & Technology

    2010-11-01

    history and lineage. Its tenets can be traced back to Roman Infantry Tactics, Leonardo da Vinci, Michelangelo, Sir...Isaac Newton, and the principles of experimentation used by Louis Pasteur in the 1800s and Thomas Edison in the early 1900s. DoD also used its...associated with 20th century manufacturing. The basic notion behind traditional methods is that all system requirements can and should be

  13. Flow Battery System Design for Manufacturability.

    SciTech Connect

    Montoya, Tracy Louise; Meacham, Paul Gregory; Perry, David; Broyles, Robin S.; Hickey, Steven; Hernandez, Jacquelynne

    2014-10-01

    Flow battery energy storage systems can support renewable energy generation and increase energy efficiency. But, presently, the costs of flow battery energy storage systems can be a significant barrier for large-scale market penetration. For cost- effective systems to be produced, it is critical to optimize the selection of materials and components simultaneously with the adherence to requirements and manufacturing processes to allow these batteries and their manufacturers to succeed in the market by reducing costs to consumers. This report analyzes performance, safety, and testing requirements derived from applicable regulations as well as commercial and military standards that would apply to a flow battery energy storage system. System components of a zinc-bromine flow battery energy storage system, including the batteries, inverters, and control and monitoring system, are discussed relative to manufacturing. The issues addressed include costs and component availability and lead times. A service and support model including setup, maintenance and transportation is outlined, along with a description of the safety-related features of the example flow battery energy storage system to promote regulatory and environmental, safety, and health compliance in anticipation of scale manufacturing.

  14. Ubiquitous Robotic Technology for Smart Manufacturing System

    PubMed Central

    Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

    2016-01-01

    As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods. PMID:27446206

  15. Ubiquitous Robotic Technology for Smart Manufacturing System.

    PubMed

    Wang, Wenshan; Zhu, Xiaoxiao; Wang, Liyu; Qiu, Qiang; Cao, Qixin

    2016-01-01

    As the manufacturing tasks become more individualized and more flexible, the machines in smart factory are required to do variable tasks collaboratively without reprogramming. This paper for the first time discusses the similarity between smart manufacturing systems and the ubiquitous robotic systems and makes an effort on deploying ubiquitous robotic technology to the smart factory. Specifically, a component based framework is proposed in order to enable the communication and cooperation of the heterogeneous robotic devices. Further, compared to the service robotic domain, the smart manufacturing systems are often in larger size. So a hierarchical planning method was implemented to improve the planning efficiency. A test bed of smart factory is developed. It demonstrates that the proposed framework is suitable for industrial domain, and the hierarchical planning method is able to solve large problems intractable with flat methods.

  16. Photoelectric detection system. [manufacturing automation

    NASA Technical Reports Server (NTRS)

    Currie, J. R.; Schansman, R. R. (Inventor)

    1982-01-01

    A photoelectric beam system for the detection of the arrival of an object at a discrete station wherein artificial light, natural light, or no light may be present is described. A signal generator turns on and off a signal light at a selected frequency. When the object in question arrives on station, ambient light is blocked by the object, and the light from the signal light is reflected onto a photoelectric sensor which has a delayed electrical output but is of the frequency of the signal light. Outputs from both the signal source and the photoelectric sensor are fed to inputs of an exclusively OR detector which provides as an output the difference between them. The difference signal is a small width pulse occurring at the frequency of the signal source. By filter means, this signal is distinguished from those responsive to sunlight, darkness, or 120 Hz artificial light. In this fashion, the presence of an object is positively established.

  17. Developing communications requirements for Agile Product Realization

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1994-03-01

    Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.

  18. Towards a Comparative Measure of Legged Agility

    DTIC Science & Technology

    2014-06-01

    so for this paper we explore the implications of a well-cited definition within the sports science community holding that agility is “a rapid whole...systems will have negligible agility according to our metric in accor- dance with biological observations that these motions require significantly less...W. Young, “Agility literature review: Classifications, training and testing,” Journal of sports sciences, vol. 24, no. 9, pp. 919–932, 2006. 19. D. L

  19. Perspectives on Agile Coaching

    NASA Astrophysics Data System (ADS)

    Fraser, Steven; Lundh, Erik; Davies, Rachel; Eckstein, Jutta; Larsen, Diana; Vilkki, Kati

    There are many perspectives to agile coaching including: growing coaching expertise, selecting the appropriate coach for your context; and eva luating value. A coach is often an itinerant who may observe, mentor, negotiate, influence, lead, and/or architect everything from team organization to system architecture. With roots in diverse fields ranging from technology to sociology coaches have differing motivations and experience bases. This panel will bring together coaches to debate and discuss various perspectives on agile coaching. Some of the questions to be addressed will include: What are the skills required for effective coaching? What should be the expectations for teams or individu als being coached? Should coaches be: a corporate resource (internal team of consultants working with multiple internal teams); an integral part of a specific team; or external contractors? How should coaches exercise influence and au thority? How should management assess the value of a coaching engagement? Do you have what it takes to be a coach? - This panel will bring together sea soned agile coaches to offer their experience and advice on how to be the best you can be!

  20. AMPS/PC - AUTOMATIC MANUFACTURING PROGRAMMING SYSTEM

    NASA Technical Reports Server (NTRS)

    Schroer, B. J.

    1994-01-01

    The AMPS/PC system is a simulation tool designed to aid the user in defining the specifications of a manufacturing environment and then automatically writing code for the target simulation language, GPSS/PC. The domain of problems that AMPS/PC can simulate are manufacturing assembly lines with subassembly lines and manufacturing cells. The user defines the problem domain by responding to the questions from the interface program. Based on the responses, the interface program creates an internal problem specification file. This file includes the manufacturing process network flow and the attributes for all stations, cells, and stock points. AMPS then uses the problem specification file as input for the automatic code generator program to produce a simulation program in the target language GPSS. The output of the generator program is the source code of the corresponding GPSS/PC simulation program. The system runs entirely on an IBM PC running PC DOS Version 2.0 or higher and is written in Turbo Pascal Version 4 requiring 640K memory and one 360K disk drive. To execute the GPSS program, the PC must have resident the GPSS/PC System Version 2.0 from Minuteman Software. The AMPS/PC program was developed in 1988.

  1. RAPID MANUFACTURING SYSTEM OF ORTHOPEDIC IMPLANTS

    PubMed Central

    Relvas, Carlos; Reis, Joana; Potes, José Alberto Caeiro; Fonseca, Fernando Manuel Ferreira; Simões, José Antonio Oliveira

    2015-01-01

    This study, aimed the development of a methodology for rapid manufacture of orthopedic implants simultaneously with the surgical intervention, considering two potential applications in the fields of orthopedics: the manufacture of anatomically adapted implants and implants for bone loss replacement. This work innovation consists on the capitation of the in situ geometry of the implant by direct capture of the shape using an elastomeric material (polyvinylsiloxane) which allows fine detail and great accuracy of the geometry. After scanning the elastomeric specimen, the implant is obtained by machining using a CNC milling machine programmed with a dedicated CAD/CAM system. After sterilization, the implant is able to be placed on the patient. The concept was developed using low cost technology and commercially available. The system has been tested in an in vivo hip arthroplasty performed on a sheep. The time increase of surgery was 80 minutes being 40 minutes the time of implant manufacturing. The system developed has been tested and the goals defined of the study achieved enabling the rapid manufacture of an implant in a time period compatible with the surgery time. PMID:27004181

  2. Research of Manufacture Time Management System Based on PLM

    NASA Astrophysics Data System (ADS)

    Jing, Ni; Juan, Zhu; Liangwei, Zhong

    This system is targeted by enterprises manufacturing machine shop, analyzes their business needs and builds the plant management information system of Manufacture time and Manufacture time information management. for manufacturing process Combined with WEB technology, based on EXCEL VBA development of methods, constructs a hybrid model based on PLM workshop Manufacture time management information system framework, discusses the functionality of the system architecture, database structure.

  3. Global drivers, sustainable manufacturing and systems ergonomics.

    PubMed

    Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

    2015-11-01

    This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

  4. Poster — Thur Eve — 56: Design of Quality Assurance Methodology for VMAT system on Agility System equipped with CVDR

    SciTech Connect

    Thind, K; Tolakanahalli, R

    2014-08-15

    The aim of this study was to analyze the feasibility of designing comprehensive QA plans using iComCAT for Elekta machines equipped with Agility multileaf collimator and continuously variable dose rate. Test plans with varying MLC speed, gantry speed, and dose rate were created and delivered in a controlled manner. A strip test was designed with three 1 cm MLC positions and delivered using dynamic, StepNShoot and VMAT techniques. Plans were also designed to test error in MLC position with various gantry speeds and various MLC speeds. The delivery fluence was captured using the electronic portal-imaging device. Gantry speed was found to be within tolerance as per the Canadian standards. MLC positioning errors at higher MLC speed with gravity effects does add more than 2 mm discrepancy. More tests need to be performed to evaluate MLC performance using independent measurement systems. The treatment planning system with end-to-end testing necessary for commissioning was also investigated and found to have >95% passing rates within 3%/3mm gamma criteria. Future studies involve performing off-axis gantry starshot pattern and repeating the tests on three matched Elekta linear accelerators.

  5. Real time PV manufacturing diagnostic system

    SciTech Connect

    Kochergin, Vladimir; Crawford, Michael A.

    2015-09-01

    The main obstacle Photovoltaic (PV) industry is facing at present is the higher cost of PV energy compared to that of fossil energy. While solar cell efficiencies continue to make incremental gains these improvements are so far insufficient to drive PV costs down to match that of fossil energy. Improved in-line diagnostics however, has the potential to significantly increase the productivity and reduce cost by improving the yield of the process. On this Phase I/Phase II SBIR project MicroXact developed and demonstrated at CIGS pilot manufacturing line a high-throughput in-line PV manufacturing diagnostic system, which was verified to provide fast and accurate data on the spatial uniformity of thickness, an composition of the thin films comprising the solar cell as the solar cell is processed reel-to-reel. In Phase II project MicroXact developed a stand-alone system prototype and demonstrated the following technical characteristics: 1) ability of real time defect/composition inconsistency detection over 60cm wide web at web speeds up to 3m/minute; 2) Better than 1mm spatial resolution on 60cm wide web; 3) an average better than 20nm spectral resolution resulting in more than sufficient sensitivity to composition imperfections (copper-rich and copper-poor regions were detected). The system was verified to be high vacuum compatible. Phase II results completely validated both technical and economic feasibility of the proposed concept. MicroXact’s solution is an enabling technique for in-line PV manufacturing diagnostics to increase the productivity of PV manufacturing lines and reduce the cost of solar energy, thus reducing the US dependency on foreign oil while simultaneously reducing emission of greenhouse gasses.

  6. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-09-01

    This paper describes a product realization process developed and demonstrated at Sandia by the A-PRIMED (Agile Product Realization for Innovative Electro MEchanical Devices) project that integrates many of the key components of ``agile manufacturing`` into a complete, design-to-production process. Evidence indicates that the process has reduced the product realization cycle and assured product quality. Products included discriminators for a robotic quick change adapter and for an electronic defense system. These discriminators, built using A-PRIMED, met random vibration requirements and had life cycles that far surpass the performance obtained from earlier efforts.

  7. Smart Manufacturing.

    PubMed

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  8. Lean Mission Operations Systems Design - Using Agile and Lean Development Principles for Mission Operations Design and Development

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2014-01-01

    The Resource Prospector Mission seeks to rove the lunar surface with an in-situ resource utilization payload in search of volatiles at a polar region. The mission operations system (MOS) will need to perform the short-duration mission while taking advantage of the near real time control that the short one-way light time to the Moon provides. To maximize our use of limited resources for the design and development of the MOS we are utilizing agile and lean methods derived from our previous experience with applying these methods to software. By using methods such as "say it then sim it" we will spend less time in meetings and more time focused on the one outcome that counts - the effective utilization of our assets on the Moon to meet mission objectives.

  9. Reconfigurable manufacturing execution system for pipe cutting

    NASA Astrophysics Data System (ADS)

    Yin, Y. H.; Xie, J. Y.

    2011-08-01

    This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

  10. Manufacturing technology methodology for propulsion system parts

    NASA Astrophysics Data System (ADS)

    McRae, M. M.

    1992-07-01

    A development history and a current status evaluation are presented for lost-wax casting of such gas turbine engine components as turbine vanes and blades. The most advanced such systems employ computer-integrated manufacturing methods for high process repeatability, reprogramming versatility, and feedback monitoring. Stereolithography-based plastic model 3D prototyping has also been incorporated for the wax part of the investment casting; it may ultimately be possible to produce the 3D prototype in wax directly, or even to create a ceramic mold directly. Nonintrusive inspections are conducted by X-radiography and neutron radiography.

  11. Process and control systems for composites manufacturing

    NASA Technical Reports Server (NTRS)

    Tsiang, T. H.; Wanamaker, John L.

    1992-01-01

    A precise control of composite material processing would not only improve part quality, but it would also directly reduce the overall manufacturing cost. The development and incorporation of sensors will help to generate real-time information for material processing relationships and equipment characteristics. In the present work, the thermocouple, pressure transducer, and dielectrometer technologies were investigated. The monitoring sensors were integrated with the computerized control system in three non-autoclave fabrication techniques: hot-press, self contained tool (self heating and pressurizing), and pressure vessel). The sensors were implemented in the parts and tools.

  12. Manufacturing Bms/Iso System Review

    NASA Technical Reports Server (NTRS)

    Gomez, Yazmin

    2004-01-01

    The Quality Management System (QMS) is one that recognizes the need to continuously change and improve an organization s products and services as determined by system feedback, and corresponding management decisions. The purpose of a Quality Management System is to minimize quality variability of an organization's products and services. The optimal Quality Management System balances the need for an organization to maintain flexibility in the products and services it provides with the need for providing the appropriate level of discipline and control over the processes used to provide them. The goal of a Quality Management System is to ensure the quality of the products and services while consistently (through minimizing quality variability) meeting or exceeding customer expectations. The GRC Business Management System (BMS) is the foundation of the Center's ISO 9001:2000 registered quality system. ISO 9001 is a quality system model developed by the International Organization for Standardization. BMS supports and promote the Glenn Research Center Quality Policy and wants to ensure the customer satisfaction while also meeting quality standards. My assignment during this summer is to examine the manufacturing processes used to develop research hardware, which in most cases are one of a kind hardware, made with non conventional equipment and materials. During this process of observation I will make a determination, based on my observations of the hardware development processes the best way to meet customer requirements and at the same time achieve the GRC quality standards. The purpose of my task is to review the manufacturing processes identifying opportunities in which to optimize the efficiency of the processes and establish a plan for implementation and continuous improvement.

  13. Study on Process Planning System for Holonic Manufacturing

    NASA Astrophysics Data System (ADS)

    Rais, Suyoto; Sugimura, Nobuhiro; Kokubun, Atsushi

    New architectures of manufacturing systems have been proposed aiming at realizing more flexible control structures of manufacturing systems which can cope with dynamic changes in volume and variety of products. They are so called as holonic manufacturing systems, autonomous distributed manufacturing systems, random manufacturing systems and biological manufacturing systems. The objective of the present research is to develop an integrated process planning and scheduling system which is applicable to the holonic manufacturing systems. In the previous paper, procedures were proposed to recognize the machining features from the product model. A systematic method is proposed, in this paper, to select suitable machining sequences and sequences of machining equipment, by applying the genetic algorithm (GA) and the dynamic programming (DP) methods.

  14. Additively Manufactured Metals in Oxygen Systems Project

    NASA Technical Reports Server (NTRS)

    Tylka, Jonathan

    2015-01-01

    Metals produced by additive manufacturing methods, such as Powder Bed Fusion Technology, are now mature enough to be considered for qualification in human spaceflight oxygen systems. The mechanical properties of metals produced through AM processes are being systematically studied. However, it is unknown whether AM metals in oxygen applications may present an increased risk of flammability or ignition as compared to wrought metals of the same metallurgical composition due to increased porosity. Per NASA-STD-6001B materials to be used in oxygen system applications shall be based on flammability and combustion test data, followed by a flammability assessment. Without systematic flammability and ignition testing in oxygen there is no credible method for NASA to accurately evaluate the risk of using AM metals in oxygen systems.

  15. Making Agile Work for You

    DTIC Science & Technology

    2011-07-20

    Extreme Programming (XP) • SCRUM • Dynamic Systems Development Method (DSDM) • Adaptive Software Development • Crystal • Feature-Driven Development...Carnegie Mellon University Twitter #seiwebinar SCRUM Scrum is an iterative, incremental methodology for managing agile software projects. The Team

  16. AGILE integration into APC for high mix logic fab

    NASA Astrophysics Data System (ADS)

    Gatefait, M.; Lam, A.; Le Gratiet, B.; Mikolajczak, M.; Morin, V.; Chojnowski, N.; Kocsis, Z.; Smith, I.; Decaunes, J.; Ostrovsky, A.; Monget, C.

    2015-09-01

    For C040 technology and below, photolithographic depth of focus control and dispersion improvement is essential to secure product functionality. Critical 193nm immersion layers present initial focus process windows close to machine control capability. For previous technologies, the standard scanner sensor (Level sensor - LS) was used to map wafer topology and expose the wafer at the right Focus. Such optical embedded metrology, based on light reflection, suffers from reading issues that cannot be neglected anymore. Metrology errors are correlated to inspected product area for which material types and densities change, and so optical properties are not constant. Various optical phenomena occur across the product field during wafer inspection and have an effect on the quality and position of the reflected light. This can result in incorrect heights being recorded and exposures possibly being done out of focus. Focus inaccuracy associated to aggressive process windows on critical layers will directly impact product realization and therefore functionality and yield. ASML has introduced an air gauge sensor to complement the optical level sensor and lead to optimal topology metrology. The use of this new sensor is managed by the AGILE (Air Gauge Improved process LEveling) application. This measurement with no optical dependency will correct for optical inaccuracy of level sensor, and so improve best focus dispersion across the product. Due to the fact that stack complexity is more and more important through process steps flow, optical perturbation of standard Level sensor metrology is increasing and is becoming maximum for metallization layers. For these reasons AGILE feature implementation was first considered for contact and all metal layers. Another key point is that standard metrology will be sensitive to layer and reticle/product density. The gain of Agile will be enhanced for multiple product contribution mask and for complex System on Chip. Into ST context (High

  17. An RFID-Based Manufacturing Control Framework for Loosely Coupled Distributed Manufacturing System Supporting Mass Customization

    NASA Astrophysics Data System (ADS)

    Chen, Ruey-Shun; Tsai, Yung-Shun; Tu, Arthur

    In this study we propose a manufacturing control framework based on radio-frequency identification (RFID) technology and a distributed information system to construct a mass-customization production process in a loosely coupled shop-floor control environment. On the basis of this framework, we developed RFID middleware and an integrated information system for tracking and controlling the manufacturing process flow. A bicycle manufacturer was used to demonstrate the prototype system. The findings of this study were that the proposed framework can improve the visibility and traceability of the manufacturing process as well as enhance process quality control and real-time production pedigree access. Using this framework, an enterprise can easily integrate an RFID-based system into its manufacturing environment to facilitate mass customization and a just-in-time production model.

  18. Agile Port and High Speed Ship Technologies

    DTIC Science & Technology

    2009-12-31

    Report PNW Agile Port System Demonstration Center for the Commercial Deployment of Transportation Technologies milestone agenda for accomplishing the... report summarizes the results of the remaining three projects in the FY05 program cycle, in particular the PNW Agile Port System Demonstration, a system...the accomplishment of each project and the program objectives. With the submission of this report the FY05 CCDoTT Program is complete. Bibliography

  19. Human factors in high consequence manufacturing systems

    SciTech Connect

    Forsythe, C.; Grose, E.

    1997-11-01

    A high consequence system is often defined as one in which the potential exists for severe or catastrophic accidents. Familiar examples include nuclear power plants, airline and other mass transportation, dams and reservoirs, and large-scale food processing. Many manufacturing systems also qualify as high consequence systems. Much of the authors` experience with high consequence systems derives from work associated with the surveillance and dismantlement of nuclear weapons for the US Department of Energy. With such operations, there exists a risk of high explosive detonation accompanied by radiological dispersal and, potentially, nuclear detonation. Analysis of major industrial accidents such as Three Mile Island, Chernobyl and Bhopal have revealed that these incidents were not attributable to a single event or direct cause, but were the result of multiple factors that combined to create a condition ripe for an accident. In each case, human error was a critical factor contributing to the accident. Consequently, many authors have emphasized the need for greater appreciation of systematic factors and in particular, human activities. This paper discusses approaches used in hazard analysis of US nuclear weapons operations to assess risk associated with human factors.

  20. Manufacturing cost/design system: A CAD/CAM dialogue

    NASA Technical Reports Server (NTRS)

    Loshigian, H. H.; Rachowitz, B. I.; Judson, D.

    1980-01-01

    The development of the Manufacturing Cost/Design System (MC/DS) will provide the aerospace design engineer a tool with which to perform heretofore impractical design manufacturing cost tradeoffs. The Air Force Integrated Computer Aided Manufacturing (ICAM) Office has initiated the development and demonstration of an MC/DS which, when fully implemented, will integrate both design and manufacturing data bases to provide real time visibility into the manufacturing costs associated with various design options. The first release of a computerized system will be made before the end of 1981.

  1. Agile Software Development

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  2. Clean, Agile Processing Technology.

    DTIC Science & Technology

    1997-12-01

    Research ltr dtd 10 Jun 98 THIS PAGE IS UNCLASSIFIED FINAL REPORT CLEAN, AGILE PROCESSING TECHNOLOGY Contract # N00014-96-C-0139 PI: S. W . Sinton...Agile Processing Technology . T UNCLAS I N Sinton, S. W.IN S REQUIRED FOR (Explain needin detaiO E C This document is requested by the Canadian Department

  3. Towards Agile Ontology Maintenance

    NASA Astrophysics Data System (ADS)

    Luczak-Rösch, Markus

    Ontologies are an appropriate means to represent knowledge on the Web. Research on ontology engineering reached practices for an integrative lifecycle support. However, a broader success of ontologies in Web-based information systems remains unreached while the more lightweight semantic approaches are rather successful. We assume, paired with the emerging trend of services and microservices on the Web, new dynamic scenarios gain momentum in which a shared knowledge base is made available to several dynamically changing services with disparate requirements. Our work envisions a step towards such a dynamic scenario in which an ontology adapts to the requirements of the accessing services and applications as well as the user's needs in an agile way and reduces the experts' involvement in ontology maintenance processes.

  4. Manufacturing Systems. Curriculum Guide for Technology Education.

    ERIC Educational Resources Information Center

    Lloyd, Theodore J.

    This curriculum for a 1-semester or 1-year course in manufacturing is designed to give students experience in applying knowledge from other courses and some basic production skills as they become involved in a manufacturing enterprise. Course content is organized around the laboratory activities necessary to organize and operate a process to mass…

  5. Distributed optically integrated manufacture system based on CORBA

    NASA Astrophysics Data System (ADS)

    Cen, Ming; Jiang, Jian-chun; Liu, Xing-fa; Hu, Rui-fei

    2007-12-01

    Focused on the shortcoming and insufficiency of reconfigurable manufacture system (RMS) for optical manufacturing in control layer and interface of manufacturing execution systems (MES) and control layer, the difference of MES-plan layer interface and that of MES-control layer is discussed, and an architecture of distributed optically integrated manufacture executing system based on fieldbus/Ethernet network and common object request broker architecture (CORBA) is presented. In this solution, the optical manufacture equipments are connected by fieldbus network, a gateway is used for the communication of fieldbus manufacture equipment and MES in the workshop, and CORBA services which provide a general interface for communication of heterogeneous fieldbus manufacture equipment of workshop are realized on the gateway. Then all specifics of heterogeneous fieldbus manufacture equipments are concealed, which show as virtual equipment and can be accessed in a simple and unified way. So the control layer is composed of virtual equipment and easy to be reconfigured. Similarly workshop management function components are modeled and encapsulated by CORBA interface, and MES could be integrated to RMS expediently. The optical integrated manufacture system presented is proved with good ability of flexible, reconfigurable, opening and high feasibility, and met the reconfigurable requirement of distributed optical manufacturing workshop preferably.

  6. Remediation System Evaluation, Hellertown Manufacturing Superfund Site

    EPA Pesticide Factsheets

    The Hellertown Manufacturing Superfund Site, located in Hellertown, Pennsylvania 1.5 miles south of Bethlehem, Pennsylvania, is approximately 8.6 acres and addresses trichloroethylene (TCE) contamination of the groundwater resulting from operations of a fo

  7. Decision Science Challenges for C2 Agility

    DTIC Science & Technology

    2014-06-01

    Controlled and automatic human information processing: II. Perceptual learning , automatic attending and a general theory . Psychological Review, 84 (2...1 19 th ICCRTS “C2 Agility: Lessons Learned from Research and Operations” Decision Science Challenges for C2 Agility Topic 1 (First...systems. We have two vectors there. The first vector would be in things like man-machine interface. The second ... is in the whole area of cognition

  8. Material Design, Selection, and Manufacturing Methods for System Sustainment

    SciTech Connect

    David Sowder, Jim Lula, Curtis Marshall

    2010-02-18

    This paper describes a material selection and validation process proven to be successful for manufacturing high-reliability long-life product. The National Secure Manufacturing Center business unit of the Kansas City Plant (herein called KCP) designs and manufactures complex electrical and mechanical components used in extreme environments. The material manufacturing heritage is founded in the systems design to manufacturing practices that support the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA). Material Engineers at KCP work with the systems designers to recommend materials, develop test methods, perform analytical analysis of test data, define cradle to grave needs, present final selection and fielding. The KCP material engineers typically will maintain cost control by utilizing commercial products when possible, but have the resources and to develop and produce unique formulations as necessary. This approach is currently being used to mature technologies to manufacture materials with improved characteristics using nano-composite filler materials that will enhance system design and production. For some products the engineers plan and carry out science-based life-cycle material surveillance processes. Recent examples of the approach include refurbished manufacturing of the high voltage power supplies for cockpit displays in operational aircraft; dry film lubricant application to improve bearing life for guided munitions gyroscope gimbals, ceramic substrate design for electrical circuit manufacturing, and tailored polymeric materials for various systems. The following examples show evidence of KCP concurrent design-to-manufacturing techniques used to achieve system solutions that satisfy or exceed demanding requirements.

  9. Computer Integrated Manufacturing: Physical Modelling Systems Design. A Personal View.

    ERIC Educational Resources Information Center

    Baker, Richard

    A computer-integrated manufacturing (CIM) Physical Modeling Systems Design project was undertaken in a time of rapid change in the industrial, business, technological, training, and educational areas in Australia. A specification of a manufacturing physical modeling system was drawn up. Physical modeling provides a flexibility and configurability…

  10. Fate of manufactured nanoparticles in environmental systems

    NASA Astrophysics Data System (ADS)

    Gelabert, A.; Sivry, Y.; Siron, V.; Akrout, A.; Ferrari, R.; Juillot, F.; Menguy, N.; Benedetti, M. F.

    2009-12-01

    approximatively 3 months of interaction. Moreover, to assess the influence of external parameters to NPs dissolution kinetics, two different pH (7.8 and 8.3) were tested. The obtained results demonstrate a strong dependence on pH, with the slower dissolution rates associated to the higher pH. XPS measurements performed on native uncoated ZnO NPs evidenced the presence of a layer of Zn(OH)2 which accounts for almost 20% of the total Zn in the NPs. This Zn(OH)2 phase, which is more soluble than ZnO, may control the early dissolution steps of the NPs in our systems. This study constitutes an important step for the understanding of the manufactured NPs fate in natural systems. [1] E. J. M. Temminghoff, A. C. C. Plette, R. Van Eck, W. H. Van Riemsdijk, (2000), Anal. Chim. Acta., 417, 149-157

  11. Agile rediscovering values: Similarities to continuous improvement strategies

    NASA Astrophysics Data System (ADS)

    Díaz de Mera, P.; Arenas, J. M.; González, C.

    2012-04-01

    Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

  12. Nonterrestrial material processing and manufacturing of large space systems

    NASA Technical Reports Server (NTRS)

    Vontiesenhausen, G. F.

    1978-01-01

    An attempt is made to provide pertinent and readily usable information on the extraterrestrial processing of materials and manufacturing of components and elements of these planned large space systems from preprocessed lunar materials which are made available at a processing and manufacturing site in space. Required facilities, equipment, machinery, energy and manpower are defined.

  13. Planning an MIS (manufacturing information system) for a job shop environment. [Manufacturing Information System

    SciTech Connect

    Cover, L.E.

    1987-01-01

    Several years ago the decision was made to computerize the information needed for management of the Mechanical and Electronics Support Division of Los Alamos National Laboratory and to centralize the resulting manufacturing information system (MIS) in one computer located at the main facility. The effort was contracted out to a software development company in July of 1981. After over five years, and in spite of tremendous investments of time and money in the existing system, the decision was made to phase out the existing system, start over, and try again to develop an information system that would meet the needs of the division. In January 1987, a study was initiated to formulate a long-range plan, which would effectively guide and direct MEC Division's information system development. Recent significant additions to the organization, changes in management staffing, and concerns for the adequacy and appropriateness of the hardware and software of the division's current MIS, led to the decision to perform the study. The study consisted of identifying the current and long-term information needs, consistent with the division's mission and goals, and recommending a plan to effectively implement information systems to fulfill these needs. Business Systems Planning (BSP), a methodology developed by IBM, was used in the study. 2 refs., 3 figs.

  14. Nonterrestrial material processing and manufacturing of large space systems

    NASA Technical Reports Server (NTRS)

    Von Tiesenhausen, G.

    1979-01-01

    Nonterrestrial processing of materials and manufacturing of large space system components from preprocessed lunar materials at a manufacturing site in space is described. Lunar materials mined and preprocessed at the lunar resource complex will be flown to the space manufacturing facility (SMF), where together with supplementary terrestrial materials, they will be final processed and fabricated into space communication systems, solar cell blankets, radio frequency generators, and electrical equipment. Satellite Power System (SPS) material requirements and lunar material availability and utilization are detailed, and the SMF processing, refining, fabricating facilities, material flow and manpower requirements are described.

  15. Development and testing of a frequency-agile optical parametric oscillator system for differential absorption lidar

    NASA Astrophysics Data System (ADS)

    Weibring, P.; Smith, J. N.; Edner, H.; Svanberg, S.

    2003-10-01

    An all-solid-state fast-tuning lidar transmitter for range- and temporally resolved atmospheric gas concentration measurements has been developed and thoroughly tested. The instrument is based on a commercial optical parametric oscillator (OPO) laser system, which has been redesigned with piezoelectric transducers mounted on the wavelength-tuning mirror and on the crystal angle tuning element in the OPO. Piezoelectric transducers similarly control a frequency-mixing stage and doubling stage, which have been incorporated to extend system capabilities to the mid-IR and UV regions. The construction allows the system to be tuned to any wavelength, in any order, in the range of the piezoelectric transducers on a shot-to-shot basis. This extends the measurement capabilities far beyond the two-wavelength differential absorption lidar method and enables simultaneous measurements of several gases. The system performance in terms of wavelength, linewidth, and power stability is monitored in real time by an étalon-based wave meter and gas cells. The tests showed that the system was able to produce radiation in the 220-4300-nm-wavelength region, with an average linewidth better than 0.2 cm-1 and a shot-to-shot tunability up to 160 cm-1 within 20 ms. The utility of real-time linewidth and wavelength measurements is demonstrated by the ability to identify occasional poor quality laser shots and disregard these measurements. Also, absorption cell measurements of methane and mercury demonstrate the performance in obtaining stable wavelength and linewidth during rapid scans in the mid-IR and UV regions.

  16. Materials/manufacturing element of the Advanced Turbine Systems Program

    SciTech Connect

    Karnitz, M.A.; Holcomb, R.S.; Wright, I.G.

    1995-10-01

    The technology based portion of the Advanced Turbine Systems Program (ATS) contains several subelements which address generic technology issues for land-based gas-turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National Laboratory (ORNL). The work in this subelement is being performed predominantly by industry with assistance from universities and the national laboratories. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. A materials/manufacturing plan was developed in FY 1994 with input from gas turbine manufacturers, materials suppliers, universities, and government laboratories. The plan outlines seven major subelements which focus on materials issues and manufacturing processes. Work is currently under way in four of the seven major subelements. There are now major projects on coatings and process development, scale-up of single crystal airfoil manufacturing technology, materials characterization, and technology information exchange.

  17. Agile Software Teams: How They Engage with Systems Engineering on DoD Acquisition Programs

    DTIC Science & Technology

    2014-07-01

    world found that a primary cause of post- design requirements change was “keeping the software and hardware engineers … out of the decision making...engineers translate systems requirements to software requirements to logical design (architecture) in a significantly different way than other types of...software cause software engineers to approach requirements devel- opment and design differently from other forms of engineering. Rather than tying the

  18. Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    PubMed

    Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

    2015-03-01

    This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

  19. An agile implementation of SCRUM

    NASA Astrophysics Data System (ADS)

    Gannon, Michele

    Is Agile a way to cut corners? To some, the use of an Agile Software Development Methodology has a negative connotation - “ Oh, you're just not producing any documentation” . So can a team with no experience in Agile successfully implement and use SCRUM?

  20. Safety Discrete Event Models for Holonic Cyclic Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Ciufudean, Calin; Filote, Constantin

    In this paper the expression “holonic cyclic manufacturing systems” refers to complex assembly/disassembly systems or fork/join systems, kanban systems, and in general, to any discrete event system that transforms raw material and/or components into products. Such a system is said to be cyclic if it provides the same sequence of products indefinitely. This paper considers the scheduling of holonic cyclic manufacturing systems and describes a new approach using Petri nets formalism. We propose an approach to frame the optimum schedule of holonic cyclic manufacturing systems in order to maximize the throughput while minimize the work in process. We also propose an algorithm to verify the optimum schedule.

  1. A methodology for Manufacturing Execution Systems (MES) implementation

    NASA Astrophysics Data System (ADS)

    Govindaraju, Rajesri; Putra, Krisna

    2016-02-01

    Manufacturing execution system is information systems (IS) application that bridges the gap between IS at the top level, namely enterprise resource planning (ERP), and IS at the lower levels, namely the automation systems. MES provides a media for optimizing the manufacturing process as a whole in a real time basis. By the use of MES in combination with the implementation of ERP and other automation systems, a manufacturing company is expected to have high competitiveness. In implementing MES, functional integration -making all the components of the manufacturing system able to work well together, is the most difficult challenge. For this, there has been an industry standard that specifies the sub-systems of a manufacturing execution systems and defines the boundaries between ERP systems, MES, and other automation systems. The standard is known as ISA-95. Although the advantages from the use of MES have been stated in some studies, not much research being done on how to implement MES effectively. The purpose of this study is to develop a methodology describing how MES implementation project should be managed, utilising the support of ISA- 95 reference model in the system development process. A proposed methodology was developed based on a general IS development methodology. The developed methodology were then revisited based on the understanding about the specific charateristics of MES implementation project found in an Indonesian steel manufacturing company implementation case. The case study highlighted the importance of applying an effective requirement elicitation method during innitial system assessment process, managing system interfaces and labor division in the design process, and performing a pilot deployment before putting the whole system into operation.

  2. Theoretical aspects of the agile mirror

    NASA Astrophysics Data System (ADS)

    Manheimer, Wallace M.; Fernsler, Richard

    1994-01-01

    A planar plasma mirror which can be oriented electronically could have the capability of providing electronic steering of a microwave beam in a radar or electronic warfare system. This system is denoted the agile mirror. A recent experiment has demonstrated such a planar plasma and the associated microwave reflection. This plasma was produced by a hollow cathode glow discharge, where the hollow cathode was a grooved metallic trench in a Lucite plate. Various theoretical aspects of this configuration of an agile mirror are examined here.

  3. Fighter agility metrics. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.

    1990-01-01

    Fighter flying qualities and combat capabilities are currently measured and compared in terms relating to vehicle energy, angular rates and sustained acceleration. Criteria based on these measurable quantities have evolved over the past several decades and are routinely used to design aircraft structures, aerodynamics, propulsion and control systems. While these criteria, or metrics, have the advantage of being well understood, easily verified and repeatable during test, they tend to measure the steady state capability of the aircraft and not its ability to transition quickly from one state to another. Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A complete set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available.

  4. Technology planning for flexible manufacturing systems

    NASA Astrophysics Data System (ADS)

    Chudakov, A. D.; Falevich, B. Y.

    1984-12-01

    The machine building industry features a new type of equipment, the flexible technological systems for machining. These systems are based on the use of machine tools with CNC, linked to a central controlling computer and an automated transport and stockpiling system. To improve the effectiveness of integrated operation of the system's equipment, the software of the central computer includes an applied program package directed toward the performance of automated planning functions, which, together with the operating documentation, makes up a system of operational calendar planning.

  5. The application of manufacturing systems engineering for aero engine gears

    NASA Astrophysics Data System (ADS)

    Pewsey, Stephen M. S.

    1991-10-01

    The adoption of manufacturing systems engineering principles in order to improve cost effectiveness of manufacturing operations is considered. The introduction of cells where families of parts are made from raw material to finished product using a team approach has been initiated. The benefits to date are significant in terms of lead time reductions, inventory, and nonconformance savings as well as improvements in work force motivation and morale. The overall corporate manufacturing strategy of gears is explained. Some of the problems encountered with the transfer of gear production from one site to another with minimum disruption are described. Some of the radical changes being made in the manufacture of gears in line with the strategy of making Rolls-Royce a total quality organization are also described.

  6. The measurement and improvement of the lateral agility of the F-18

    NASA Technical Reports Server (NTRS)

    Eggold, David P.; Valasek, John; Downing, David R.

    1991-01-01

    The effect of vehicle configuration and flight control system performance on the roll agility of a modern fighter aircraft has been investigated. A batch simulation of a generic F-18 Hornet was used to study the roll agility as measured by the time to roll through 90 deg metric. Problems discussed include definition of agility, factors affecting the agility of a vehicle, the development of the time to roll through 90 deg agility metric, and a simulation experiment. It is concluded that the integral of stability or wind axis roll rate should be used as a measure of the roll measure traversed. The time through roll angle 90 deg metric is considered to be a good metric for measuring the transient performance aspect of agility. Roll agility of the F-18, as measured by 90 deg metric, can be improved by 10 to 30 percent. Compatible roll and rudder actuator rates can significantly affect 90 deg agility metric.

  7. Agile Methods for Open Source Safety-Critical Software

    PubMed Central

    Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-01-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  8. Agile Methods for Open Source Safety-Critical Software.

    PubMed

    Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-08-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion.

  9. Synthesis of Evolving Cells for Reconfigurable Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Padayachee, J.; Bright, G.

    2014-07-01

    The concept of Reconfigurable Manufacturing Systems (RMSs) was formulated due to the global necessity for production systems that are able to economically evolve according to changes in markets and products. Technologies and design methods are under development to enable RMSs to exhibit transformable system layouts, reconfigurable processes, cells and machines. Existing factory design methods and software have not yet advanced to include reconfigurable manufacturing concepts. This paper presents the underlying group technology framework for the design of manufacturing cells that are able to evolve according to a changing product mix by mechanisms of reconfiguration. The framework is based on a Norton- Bass forecast and time variant BOM models. An adaptation of legacy group technology methods is presented for the synthesis of evolving cells and two optimization problems are presented within this context.

  10. System level analysis and control of manufacturing process variation

    DOEpatents

    Hamada, Michael S.; Martz, Harry F.; Eleswarpu, Jay K.; Preissler, Michael J.

    2005-05-31

    A computer-implemented method is implemented for determining the variability of a manufacturing system having a plurality of subsystems. Each subsystem of the plurality of subsystems is characterized by signal factors, noise factors, control factors, and an output response, all having mean and variance values. Response models are then fitted to each subsystem to determine unknown coefficients for use in the response models that characterize the relationship between the signal factors, noise factors, control factors, and the corresponding output response having mean and variance values that are related to the signal factors, noise factors, and control factors. The response models for each subsystem are coupled to model the output of the manufacturing system as a whole. The coefficients of the fitted response models are randomly varied to propagate variances through the plurality of subsystems and values of signal factors and control factors are found to optimize the output of the manufacturing system to meet a specified criterion.

  11. Monitoring system for the quality assessment in additive manufacturing

    SciTech Connect

    Carl, Volker

    2015-03-31

    Additive Manufacturing (AM) refers to a process by which a set of digital data -representing a certain complex 3dim design - is used to grow the respective 3dim real structure equal to the corresponding design. For the powder-based EOS manufacturing process a variety of plastic and metal materials can be used. Thereby, AM is in many aspects a very powerful tool as it can help to overcome particular limitations in conventional manufacturing. AM enables more freedom of design, complex, hollow and/or lightweight structures as well as product individualisation and functional integration. As such it is a promising approach with respect to the future design and manufacturing of complex 3dim structures. On the other hand, it certainly calls for new methods and standards in view of quality assessment. In particular, when utilizing AM for the design of complex parts used in aviation and aerospace technologies, appropriate monitoring systems are mandatory. In this respect, recently, sustainable progress has been accomplished by joining the common efforts and concerns of a manufacturer Additive Manufacturing systems and respective materials (EOS), along with those of an operator of such systems (MTU Aero Engines) and experienced application engineers (Carl Metrology), using decent know how in the field of optical and infrared methods regarding non-destructive-examination (NDE). The newly developed technology is best described by a high-resolution layer by layer inspection technique, which allows for a 3D tomography-analysis of the complex part at any time during the manufacturing process. Thereby, inspection costs are kept rather low by using smart image-processing methods as well as CMOS sensors instead of infrared detectors. Moreover, results from conventional physical metallurgy may easily be correlated with the predictive results of the monitoring system which not only allows for improvements of the AM monitoring system, but finally leads to an optimisation of the quality

  12. Monitoring system for the quality assessment in additive manufacturing

    NASA Astrophysics Data System (ADS)

    Carl, Volker

    2015-03-01

    Additive Manufacturing (AM) refers to a process by which a set of digital data -representing a certain complex 3dim design - is used to grow the respective 3dim real structure equal to the corresponding design. For the powder-based EOS manufacturing process a variety of plastic and metal materials can be used. Thereby, AM is in many aspects a very powerful tool as it can help to overcome particular limitations in conventional manufacturing. AM enables more freedom of design, complex, hollow and/or lightweight structures as well as product individualisation and functional integration. As such it is a promising approach with respect to the future design and manufacturing of complex 3dim structures. On the other hand, it certainly calls for new methods and standards in view of quality assessment. In particular, when utilizing AM for the design of complex parts used in aviation and aerospace technologies, appropriate monitoring systems are mandatory. In this respect, recently, sustainable progress has been accomplished by joining the common efforts and concerns of a manufacturer Additive Manufacturing systems and respective materials (EOS), along with those of an operator of such systems (MTU Aero Engines) and experienced application engineers (Carl Metrology), using decent know how in the field of optical and infrared methods regarding non-destructive-examination (NDE). The newly developed technology is best described by a high-resolution layer by layer inspection technique, which allows for a 3D tomography-analysis of the complex part at any time during the manufacturing process. Thereby, inspection costs are kept rather low by using smart image-processing methods as well as CMOS sensors instead of infrared detectors. Moreover, results from conventional physical metallurgy may easily be correlated with the predictive results of the monitoring system which not only allows for improvements of the AM monitoring system, but finally leads to an optimisation of the quality

  13. Modelling of Robotized Manufacturing Systems Using MultiAgent Formalism

    NASA Astrophysics Data System (ADS)

    Foit, K.; Gwiazda, A.; Banaś, W.

    2016-08-01

    The evolution of manufacturing systems has greatly accelerated due to development of sophisticated control systems. On top of determined, one way production flow the need of decision making has arisen as a result of growing product range that are manufactured simultaneously, using the same resources. On the other hand, the intelligent flow control could address the “bottleneck” problem caused by the machine failure. This sort of manufacturing systems uses advanced control algorithms that are introduced by the use of logic controllers. The complex algorithms used in the control systems requires to employ appropriate methods during the modelling process, like the agent-based one, which is the subject of this paper. The concept of an agent is derived from the object-based methodology of modelling, so it meets the requirements of representing the physical properties of the machines as well as the logical form of control systems. Each agent has a high level of autonomy and could be considered separately. The multi-agent system consists of minimum two agents that can interact and modify the environment, where they act. This may lead to the creation of self-organizing structure, what could be interesting feature during design and test of manufacturing system.

  14. Pathways to agility in the production of neutron generators

    SciTech Connect

    Stoltz, R.E.; Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W.

    1994-02-01

    This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

  15. Operational Agility (La Maniabilite Operationnelle)

    DTIC Science & Technology

    1994-04-01

    describe how to go further and how to set up an analytical framework for the analysis of another fundamental property of modern combat aircraft, that is... analytical framework for the analysis of airframe agility and for the derivation of agility metrics. A general consensus has been found in relating agility...Gianchecchi, Aernmacchi Lt Col. G. Fristachi, Italian Air Force Prof. M. Innocenti, Auburn University/University of Pisa United Kingdom Mr P. Gordon

  16. Design for Manufacturing for Energy Absorption Systems

    SciTech Connect

    Del Prete, A.; Primo, T.; Papadia, G.; Manisi, B.

    2011-05-04

    In the typical scenario of a helicopter crash, impact with the ground is preceded by a substantially vertical drop, with the result that a seated occupant of a helicopter experiences high spinal loads and pelvic deceleration during such crash due to the sudden arresting of vertical downward motion. It has long been recognized that spinal injuries to occupants of helicopters in such crash scenario can be minimized by seat arrangements which limit the deceleration to which the seated occupant is subjected, relative to the helicopter, to a predetermined maximum, by allowing downward movement of the seated occupant relative to the helicopter, at the time of impact with the ground, under a restraining force which, over a limited range of such movement, is limited to a predetermined maximum. In practice, significant benefits, in the way of reduced injuries and reduced seriousness of injuries, can be afforded in this way in such crash situations even where the extent of such controlled vertical movement permitted by the crashworthy seat arrangement is quite limited. Important increase of accident safety is reached with the installation of crashworthy shock absorbers on the main landing gear, but this solution is mostly feasible on military helicopters with long fixed landing gear. Seats can then give high contribution to survivability. Commonly, an energy absorber is a constant load device, if one excludes an initial elastic part of the load-stroke curve. On helicopter seats, this behavior is obtained by plastic deformation of a metal component or scraping of material. In the present work the authors have studied three absorption systems, which differ in relation to their shape, their working conditions and their constructive materials. All the combinations have been analyzed for applications in VIP helicopter seats.

  17. Systems analysis of a potential space manufacturing facility

    NASA Technical Reports Server (NTRS)

    Driggers, G. W.

    1977-01-01

    Results of a preliminary design study of the system elements comprising a manufacturing facility in earth orbit are presented. The elements discussed include cis-Lunar transportation, Lunar base, materials transport, factory, living facilities, construction support and energy supply. An evolutionary path of development, production and deployment is presented and step-wise interrelationships discussed.

  18. Multilayer electronic component systems and methods of manufacture

    NASA Technical Reports Server (NTRS)

    Thompson, Dane (Inventor); Wang, Guoan (Inventor); Kingsley, Nickolas D. (Inventor); Papapolymerou, Ioannis (Inventor); Tentzeris, Emmanouil M. (Inventor); Bairavasubramanian, Ramanan (Inventor); DeJean, Gerald (Inventor); Li, RongLin (Inventor)

    2010-01-01

    Multilayer electronic component systems and methods of manufacture are provided. In this regard, an exemplary system comprises a first layer of liquid crystal polymer (LCP), first electronic components supported by the first layer, and a second layer of LCP. The first layer is attached to the second layer by thermal bonds. Additionally, at least a portion of the first electronic components are located between the first layer and the second layer.

  19. Contract-net-based scheduling for holonic manufacturing systems

    NASA Astrophysics Data System (ADS)

    Kanchanasevee, Pinij; Biswas, Gautam; Kawamura, Kazuhiko; Tamura, Satoru

    1997-12-01

    Manufacturing is currently undergoing a revolutionary transition with focus shifting from mass production to mass customization. This trend motivates a new generation of advanced manufacturing systems that can dynamically respond to customer orders and changing production environments. It is becoming increasingly important to develop control architectures that are modifiable, extensible, reconfigurable, adaptable, and fault tolerant. Heterarchical control structures, made up of multiple, distributed, locally autonomous entities, provide this kind of control. Our research focus is on efficient and effective scheduling and routing methodologies that can be applied to heterarchically controlled manufacturing processes. The Contract-Net based scheduling approach, developed in distributed artificial intelligence (DAI), adopts a multi-agent cooperative problem- solving paradigm based on bidding and negotiation mechanisms to implement production plans as distributed and localized schedules for individual workstations. This paper discusses a Contract-Net based scheduling algorithm in a realistic manufacturing testbed, a model induction motor assembly plant. This testbed, developed as part of the HMS project, is a typical example of low-volume, high-variety production facility, and it highlights many of the problems that arise from the inflexibility of centralized management system architectures.

  20. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  1. Agile Infrastructure Monitoring

    NASA Astrophysics Data System (ADS)

    Andrade, P.; Ascenso, J.; Fedorko, I.; Fiorini, B.; Paladin, M.; Pigueiras, L.; Santos, M.

    2014-06-01

    At the present time, data centres are facing a massive rise in virtualisation and cloud computing. The Agile Infrastructure (AI) project is working to deliver new solutions to ease the management of CERN data centres. Part of the solution consists in a new "shared monitoring architecture" which collects and manages monitoring data from all data centre resources. In this article, we present the building blocks of this new monitoring architecture, the different open source technologies selected for each architecture layer, and how we are building a community around this common effort.

  2. SLS Flight Software Testing: Using a Modified Agile Software Testing Approach

    NASA Technical Reports Server (NTRS)

    Bolton, Albanie T.

    2016-01-01

    NASA's Space Launch System (SLS) is an advanced launch vehicle for a new era of exploration beyond earth's orbit (BEO). The world's most powerful rocket, SLS, will launch crews of up to four astronauts in the agency's Orion spacecraft on missions to explore multiple deep-space destinations. Boeing is developing the SLS core stage, including the avionics that will control vehicle during flight. The core stage will be built at NASA's Michoud Assembly Facility (MAF) in New Orleans, LA using state-of-the-art manufacturing equipment. At the same time, the rocket's avionics computer software is being developed here at Marshall Space Flight Center in Huntsville, AL. At Marshall, the Flight and Ground Software division provides comprehensive engineering expertise for development of flight and ground software. Within that division, the Software Systems Engineering Branch's test and verification (T&V) team uses an agile test approach in testing and verification of software. The agile software test method opens the door for regular short sprint release cycles. The idea or basic premise behind the concept of agile software development and testing is that it is iterative and developed incrementally. Agile testing has an iterative development methodology where requirements and solutions evolve through collaboration between cross-functional teams. With testing and development done incrementally, this allows for increased features and enhanced value for releases. This value can be seen throughout the T&V team processes that are documented in various work instructions within the branch. The T&V team produces procedural test results at a higher rate, resolves issues found in software with designers at an earlier stage versus at a later release, and team members gain increased knowledge of the system architecture by interfacing with designers. SLS Flight Software teams want to continue uncovering better ways of developing software in an efficient and project beneficial manner

  3. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, Stephan P.

    1998-01-01

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy.

  4. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  5. Moving target detection for frequency agility radar by sparse reconstruction.

    PubMed

    Quan, Yinghui; Li, YaChao; Wu, Yaojun; Ran, Lei; Xing, Mengdao; Liu, Mengqi

    2016-09-01

    Frequency agility radar, with randomly varied carrier frequency from pulse to pulse, exhibits superior performance compared to the conventional fixed carrier frequency pulse-Doppler radar against the electromagnetic interference. A novel moving target detection (MTD) method is proposed for the estimation of the target's velocity of frequency agility radar based on pulses within a coherent processing interval by using sparse reconstruction. Hardware implementation of orthogonal matching pursuit algorithm is executed on Xilinx Virtex-7 Field Programmable Gata Array (FPGA) to perform sparse optimization. Finally, a series of experiments are performed to evaluate the performance of proposed MTD method for frequency agility radar systems.

  6. Moving target detection for frequency agility radar by sparse reconstruction

    NASA Astrophysics Data System (ADS)

    Quan, Yinghui; Li, YaChao; Wu, Yaojun; Ran, Lei; Xing, Mengdao; Liu, Mengqi

    2016-09-01

    Frequency agility radar, with randomly varied carrier frequency from pulse to pulse, exhibits superior performance compared to the conventional fixed carrier frequency pulse-Doppler radar against the electromagnetic interference. A novel moving target detection (MTD) method is proposed for the estimation of the target's velocity of frequency agility radar based on pulses within a coherent processing interval by using sparse reconstruction. Hardware implementation of orthogonal matching pursuit algorithm is executed on Xilinx Virtex-7 Field Programmable Gata Array (FPGA) to perform sparse optimization. Finally, a series of experiments are performed to evaluate the performance of proposed MTD method for frequency agility radar systems.

  7. 78 FR 8407 - Authorization To Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-06

    ... 501 Authorization To Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia... Service introduced the Information Based Indicia Program (IBIP). Under IBIP, postage evidencing systems... concerning the manufacture and distribution of postage evidencing systems to clarify that effective January...

  8. 77 FR 41336 - Authorization to Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-13

    ... 501 Authorization to Manufacture and Distribute Postage Evidencing Systems; Discontinued Indicia... information. Effective January 1, 2016, all postage evidencing systems (postage meters and PC Postage products... rules concerning the manufacture and distribution of postage evidencing systems to clarify...

  9. A 3D Split Manufacturing Approach to Trustworthy System Development

    DTIC Science & Technology

    2012-12-01

    Acıiçmez, J.P. Seifert, and C.K. Koc. Micro -architectural cryptanalysis. IEEE Security and Privacy Magazine, 5(4), July-August 2007. [4] Daniel J...International Symposium on Microarchitecture ( MICRO ), Orlando, FL, December 2006. VALAMEHR et al.: A 3D SPLIT MANUFACTURING APPROACH TO TRUSTWORTHY SYSTEM...IEEE Micro , 27(3), May-June 2007. [16] Gian Luca Loi, Banit Agrawal, Navin Srivastava, Sheng-Chih Lin, Timothy Sherwood, and Kaustav Banerjee. A

  10. Manufactured residential utility wall system (ResCore), overview

    SciTech Connect

    Wendt, R.; Lundell, C.; Lau, T.M.

    1997-05-01

    This paper provides an overview of the design and development of a manufactured residential utility wall system referred to as ResCore. ResCore is a self-contained, manufactured, residential utility wall that provides complete rough-in of utilities (power, gas, water, and phone) and other functions (exhaust, combustion make-up air, refrigerant lines, etc.) to serve the residential kitchen, bath, utility, and laundry rooms. Auburn University, Department of Industrial Design faculty and students, supported by a team of graduate student researchers and the project`s advisory team, developed the ResCore. The project was accomplished through a research subcontract from the US Department of Energy administered by the Oak Ridge National Laboratory. The ResCore wall system features a ``layered`` manufacturing technique that allows each major component group--structural, cold water, hot water, drain, gas, electric, etc.--to be built as a separate subassembly and easily brought together for final assembly. The two structural layers are reinforced with bridging that adds strength and also permits firm attachment of plumbing pipes and other systems to the wall frame.

  11. Manufactured Residential Utility Wall System (ResCore),

    SciTech Connect

    Wendt, Robert; Lundell, Clark; Lau, Tin Man

    1997-12-31

    This paper describes the design and development of a manufactured residential utility wall system referred to as ResCore. ResCore is a self contained, manufactured, residential utility wall that provides complete rough-in of utilities (power, gas, water, and phone) and other functions (exhaust, combustion make-up air, refrigerant lines, etc.) to serve the kitchen, bath, utility, and laundry rooms. Auburn University, Department of Industrial Design faculty, students, supported by a team of graduate student researchers and the project`s advisory team, developed the ResCore. The project was accomplished through a research subcontract from the U.S. Department of Energy administered by the Oak Ridge National Laboratory. The ResCore wall system features a layered manufacturing technique that allows each major component group: structural, cold water, hot water, drain, gas, electric, etc. to be built as a separate subassembly and easily brought together for final assembly. The two structural layers are reinforced with bridging that adds strength and also permits firm attachment of plumbing pipes and other systems to the wall frame.

  12. A system approach for reducing the environmental impact of manufacturing and sustainability improvement of nano-scale manufacturing

    NASA Astrophysics Data System (ADS)

    Yuan, Yingchun

    This dissertation develops an effective and economical system approach to reduce the environmental impact of manufacturing. The system approach is developed by using a process-based holistic method for upstream analysis and source reduction of the environmental impact of manufacturing. The system approach developed consists of three components of a manufacturing system: technology, energy and material, and is useful for sustainable manufacturing as it establishes a clear link between manufacturing system components and its overall sustainability performance, and provides a framework for environmental impact reductions. In this dissertation, the system approach developed is applied for environmental impact reduction of a semiconductor nano-scale manufacturing system, with three case scenarios analyzed in depth on manufacturing process improvement, clean energy supply, and toxic chemical material selection. The analysis on manufacturing process improvement is conducted on Atomic Layer Deposition of Al2O3 dielectric gate on semiconductor microelectronics devices. Sustainability performance and scale-up impact of the ALD technology in terms of environmental emissions, energy consumption, nano-waste generation and manufacturing productivity are systematically investigated and the ways to improve the sustainability of the ALD technology are successfully developed. The clean energy supply is studied using solar photovoltaic, wind, and fuel cells systems for electricity generation. Environmental savings from each clean energy supply over grid power are quantitatively analyzed, and costs for greenhouse gas reductions on each clean energy supply are comparatively studied. For toxic chemical material selection, an innovative schematic method is developed as a visual decision tool for characterizing and benchmarking the human health impact of toxic chemicals, with a case study conducted on six chemicals commonly used as solvents in semiconductor manufacturing. Reliability of

  13. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    NASA Astrophysics Data System (ADS)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  14. Pilot users in agile development processes: motivational factors.

    PubMed

    Johannessen, Liv Karen; Gammon, Deede

    2010-01-01

    Despite a wealth of research on user participation, few studies offer insights into how to involve multi-organizational users in agile development methods. This paper is a case study of user involvement in developing a system for electronic laboratory requisitions using agile methodologies in a multi-organizational context. Building on an interpretive approach, we illuminate questions such as: How does collaboration between users and developers evolve and how might it be improved? What key motivational aspects are at play when users volunteer and continue contributing in the face of considerable added burdens? The study highlights how agile methods in themselves appear to facilitate mutually motivating collaboration between user groups and developers. Lessons learned for leveraging the advantages of agile development processes include acknowledging the substantial and ongoing contributions of users and their roles as co-designers of the system.

  15. Design and Manufacturing of Extremely Low Mass Flight Systems

    NASA Technical Reports Server (NTRS)

    Johnson, Michael R.

    2002-01-01

    Extremely small flight systems pose some unusual design and manufacturing challenges. The small size of the components that make up the system generally must be built with extremely tight tolerances to maintain the functionality of the assembled item. Additionally, the total mass of the system is extremely sensitive to what would be considered small perturbations in a larger flight system. The MUSES C mission, designed, built, and operated by Japan, has a small rover provided by NASA that falls into this small flight system category. This NASA-provided rover is used as a case study of an extremely small flight system design. The issues that were encountered with the rover portion of the MUSES C program are discussed and conclusions about the recommended mass margins at different stages of a small flight system project are presented.

  16. Modular Exhaust Design and Manufacturing Techniques for Low Cost Mid Volume Rapid Buidl to Order Systems

    DTIC Science & Technology

    2014-08-06

    technical data package will contain the following pieces of information: • Manufacturing Drawings • Code for running CNC machinery • Documentation...MODULAR EXHAUST DESIGN AND MANUFACTURING TECHNIQUES FOR LOW COST MID VOLUME RAPID BUILD TO ORDER SYSTEMS Kevin Nelson Project Engineer...customizable mufflers, as well as modular manufacturing techniques targeted at mid volume manufacturing quantities. A successful solution would reduce

  17. "Cut-and-paste" manufacture of multiparametric epidermal electronic systems

    NASA Astrophysics Data System (ADS)

    Lu, Nanshu; Yang, Shixuan; Wang, Pulin

    2016-05-01

    Epidermal electronics is a class of noninvasive and unobstructive skin-mounted, tattoo-like sensors and electronics capable of vital sign monitoring and establishing human-machine interface. The high cost of manpower, materials, vacuum equipment, and photolithographic facilities associated with its manufacture greatly hinders the widespread use of disposable epidermal electronics. Here we report a cost and time effective, completely dry, benchtop "cut-and-paste" method for the freeform and portable manufacture of multiparametric epidermal sensor systems (ESS) within minutes. This versatile method works for all types of thin metal and polymeric sheets and is compatible with any tattoo adhesives or medical tapes. The resulting ESS are multimaterial and multifunctional and have been demonstrated to noninvasively but accurately measure electrophysiological signals, skin temperature, skin hydration, as well as respiratory rate. In addition, planar stretchable coils exploiting double-stranded serpentine design have been successfully applied as wireless, passive epidermal strain sensors.

  18. Designing the accident and emergency system: lessons from manufacturing

    PubMed Central

    Walley, P

    2003-01-01

    Objectives: To review the literature on manufacturing process design and demonstrate applicability in health care. Methods: Literature review and application of theory using two years activity data from two healthcare communities and extensive observation of activities over a six week period by seven researchers. Results: It was possible to identify patient flows that could be used to design treatment processes around the needs of the patient. Some queues are built into existing treatment processes and can be removed by better process design. Capacity imbalance, not capacity shortage, causes some unnecessary waiting in accident and emergency departments. Conclusions: Clinicians would find that modern manufacturing theories produce more acceptable designs of systems. In particular, good quality is seen as a necessary pre-requisite of fast, efficient services. PMID:12642523

  19. System and method for high power diode based additive manufacturing

    DOEpatents

    El-Dasher, Bassem S.; Bayramian, Andrew; Demuth, James A.; Farmer, Joseph C.; Torres, Sharon G.

    2016-04-12

    A system is disclosed for performing an Additive Manufacturing (AM) fabrication process on a powdered material forming a substrate. The system may make use of a diode array for generating an optical signal sufficient to melt a powdered material of the substrate. A mask may be used for preventing a first predetermined portion of the optical signal from reaching the substrate, while allowing a second predetermined portion to reach the substrate. At least one processor may be used for controlling an output of the diode array.

  20. Space manufacturing systems and the Space Operations Center

    NASA Technical Reports Server (NTRS)

    Louviere, A. J.

    1982-01-01

    For the planned Space Operations Center (SOC) and envisioned space manufacturing and processes systems, the concepts of phased programs, development and operations, station-keeping orbit envelopes, propulsive harbor tugs, and aspects of servicing are discussed. The SOC three-phased program concept includes the servicing of satellites in compatible orbits and in transition to higher energy orbits. Two concepts of a free-flyer satellite are assessed, including the fuel system, and the placement of such a satellite into orbit is discussed. Finally, some services that will be provided by SOC are mentioned.

  1. Input-output identification of controlled discrete manufacturing systems

    NASA Astrophysics Data System (ADS)

    Estrada-Vargas, Ana Paula; López-Mellado, Ernesto; Lesage, Jean-Jacques

    2014-03-01

    The automated construction of discrete event models from observations of external system's behaviour is addressed. This problem, often referred to as system identification, allows obtaining models of ill-known (or even unknown) systems. In this article, an identification method for discrete event systems (DESs) controlled by a programmable logic controller is presented. The method allows processing a large quantity of observed long sequences of input/output signals generated by the controller and yields an interpreted Petri net model describing the closed-loop behaviour of the automated DESs. The proposed technique allows the identification of actual complex systems because it is sufficiently efficient and well adapted to cope with both the technological characteristics of industrial controllers and data collection requirements. Based on polynomial-time algorithms, the method is implemented as an efficient software tool which constructs and draws the model automatically; an overview of this tool is given through a case study dealing with an automated manufacturing system.

  2. Aircraft agility maneuvers

    NASA Technical Reports Server (NTRS)

    Cliff, Eugene M.; Thompson, Brian G.

    1992-01-01

    A new dynamic model for aircraft motions is presented. This model can be viewed as intermediate between a point-mass model, in which the body attitude angles are control-like, and a rigid-body model, in which the body-attitude angles evolve according to Newton's Laws. Specifically, consideration is given to the case of symmetric flight, and a model is constructed in which the body roll-rate and the body pitch-rate are the controls. In terms of this body-rate model a minimum-time heading change maneuver is formulated. When the bounds on the body-rates are large the results are similar to the point-mass model in that the model can very quickly change the applied forces and produce an acceleration to turn the vehicle. With finite bounds on these rates, the forces change in a smooth way. This leads to a measurable effect of agility.

  3. Elements of an Art - Agile Coaching

    NASA Astrophysics Data System (ADS)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  4. 76 FR 67017 - Notice to Manufacturers of Airport Avian Radar Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    ... Federal Aviation Administration Notice to Manufacturers of Airport Avian Radar Systems AGENCY: Federal Aviation Administration (FAA), U.S. DOT. ACTION: Notice to Manufacturers of Airport Avian Radar Systems... waivers to foreign manufacturers of airport avian radar systems that meet the requirements of FAA...

  5. 77 FR 23618 - Authority To Manufacture and Distribute Postage Evidencing Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-20

    ... 501 Authority To Manufacture and Distribute Postage Evidencing Systems AGENCY: Postal Service TM...--AUTHORIZATION TO MANUFACTURE AND DISTRIBUTE POSTAGE EVIDENCING SYSTEMS 1. The authority citation for 39 CFR part... Postage Evidencing Systems that it manufactures or distributes, except those purchased by the...

  6. Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

    NASA Technical Reports Server (NTRS)

    Wetherholt, Martha

    2016-01-01

    To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

  7. A methodology toward manufacturing grid-based virtual enterprise operation platform

    NASA Astrophysics Data System (ADS)

    Tan, Wenan; Xu, Yicheng; Xu, Wei; Xu, Lida; Zhao, Xianhua; Wang, Li; Fu, Liuliu

    2010-08-01

    Virtual enterprises (VEs) have become one of main types of organisations in the manufacturing sector through which the consortium companies organise their manufacturing activities. To be competitive, a VE relies on the complementary core competences among members through resource sharing and agile manufacturing capacity. Manufacturing grid (M-Grid) is a platform in which the production resources can be shared. In this article, an M-Grid-based VE operation platform (MGVEOP) is presented as it enables the sharing of production resources among geographically distributed enterprises. The performance management system of the MGVEOP is based on the balanced scorecard and has the capacity of self-learning. The study shows that a MGVEOP can make a semi-automated process possible for a VE, and the proposed MGVEOP is efficient and agile.

  8. The Southern Argentina Agile MEteor Radar Orbital System (SAAMER-OS): An Initial Sporadic Meteoroid Orbital Survey in the Southern Sky

    NASA Astrophysics Data System (ADS)

    Janches, D.; Close, S.; Hormaechea, J. L.; Swarnalingam, N.; Murphy, A.; O'Connor, D.; Vandepeer, B.; Fuller, B.; Fritts, D. C.; Brunini, C.

    2015-08-01

    We present an initial survey in the southern sky of the sporadic meteoroid orbital environment obtained with the Southern Argentina Agile MEteor Radar (SAAMER) Orbital System (OS), in which over three-quarters of a million orbits of dust particles were determined from 2012 January through 2015 April. SAAMER-OS is located at the southernmost tip of Argentina and is currently the only operational radar with orbit determination capability providing continuous observations of the southern hemisphere. Distributions of the observed meteoroid speed, radiant, and heliocentric orbital parameters are presented, as well as those corrected by the observational biases associated with the SAAMER-OS operating parameters. The results are compared with those reported by three previous surveys performed with the Harvard Radio Meteor Project, the Advanced Meteor Orbit Radar, and the Canadian Meteor Orbit Radar, and they are in agreement with these previous studies. Weighted distributions for meteoroids above the thresholds for meteor trail electron line density, meteoroid mass, and meteoroid kinetic energy are also considered. Finally, the minimum line density and kinetic energy weighting factors are found to be very suitable for meteroid applications. The outcomes of this work show that, given SAAMER’s location, the system is ideal for providing crucial data to continuously study the South Toroidal and South Apex sporadic meteoroid apparent sources.

  9. The Southern Argentina Agile Meteor Radar Orbital System (SAAMER-OS): An Initial Sporadic Meteoroid Orbital Survey in the Southern Sky

    NASA Technical Reports Server (NTRS)

    Janches, D.; Close, S.; Hormaechea, J. L.; Swarnalingam, N.; Murphy, A.; O'Connor, D.; Vandepeer, B.; Fuller, B.; Fritts, D. C.; Brunini, C.

    2015-01-01

    We present an initial survey in the southern sky of the sporadic meteoroid orbital environment obtained with the Southern Argentina Agile MEteor Radar (SAAMER) Orbital System (OS), in which over three-quarters of a million orbits of dust particles were determined from 2012 January through 2015 April. SAAMER-OS is located at the southernmost tip of Argentina and is currently the only operational radar with orbit determination capability providing continuous observations of the southern hemisphere. Distributions of the observed meteoroid speed, radiant, and heliocentric orbital parameters are presented, as well as those corrected by the observational biases associated with the SAAMER-OS operating parameters. The results are compared with those reported by three previous surveys performed with the Harvard Radio Meteor Project, the Advanced Meteor Orbit Radar, and the Canadian Meteor Orbit Radar, and they are in agreement with these previous studies. Weighted distributions for meteoroids above the thresholds for meteor trail electron line density, meteoroid mass, and meteoroid kinetic energy are also considered. Finally, the minimum line density and kinetic energy weighting factors are found to be very suitable for meteoroid applications. The outcomes of this work show that, given SAAMERs location, the system is ideal for providing crucial data to continuously study the South Toroidal and South Apex sporadic meteoroid apparent sources.

  10. THE SOUTHERN ARGENTINA AGILE METEOR RADAR ORBITAL SYSTEM (SAAMER-OS): AN INITIAL SPORADIC METEOROID ORBITAL SURVEY IN THE SOUTHERN SKY

    SciTech Connect

    Janches, D.; Swarnalingam, N.; Close, S.; Hormaechea, J. L.; Murphy, A.; O’Connor, D.; Vandepeer, B.; Fuller, B.; Fritts, D. C.; Brunini, C. E-mail: nimalan.swarnalingam@nasa.gov E-mail: jlhormaechea@untdf.edu.ar E-mail: doconnor@gsoft.com.au E-mail: bfuller@gsoft.com.au E-mail: claudiobrunini@yahoo.com

    2015-08-10

    We present an initial survey in the southern sky of the sporadic meteoroid orbital environment obtained with the Southern Argentina Agile MEteor Radar (SAAMER) Orbital System (OS), in which over three-quarters of a million orbits of dust particles were determined from 2012 January through 2015 April. SAAMER-OS is located at the southernmost tip of Argentina and is currently the only operational radar with orbit determination capability providing continuous observations of the southern hemisphere. Distributions of the observed meteoroid speed, radiant, and heliocentric orbital parameters are presented, as well as those corrected by the observational biases associated with the SAAMER-OS operating parameters. The results are compared with those reported by three previous surveys performed with the Harvard Radio Meteor Project, the Advanced Meteor Orbit Radar, and the Canadian Meteor Orbit Radar, and they are in agreement with these previous studies. Weighted distributions for meteoroids above the thresholds for meteor trail electron line density, meteoroid mass, and meteoroid kinetic energy are also considered. Finally, the minimum line density and kinetic energy weighting factors are found to be very suitable for meteroid applications. The outcomes of this work show that, given SAAMER’s location, the system is ideal for providing crucial data to continuously study the South Toroidal and South Apex sporadic meteoroid apparent sources.

  11. Sikorsky interactive graphics surface design/manufacturing system

    NASA Technical Reports Server (NTRS)

    Robbins, R.

    1975-01-01

    An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

  12. Communication and control in an integrated manufacturing system

    NASA Technical Reports Server (NTRS)

    Shin, Kang G.; Throne, Robert D.; Muthuswamy, Yogesh K.

    1987-01-01

    Typically, components in a manufacturing system are all centrally controlled. Due to possible communication bottlenecking, unreliability, and inflexibility caused by using a centralized controller, a new concept of system integration called an Integrated Multi-Robot System (IMRS) was developed. The IMRS can be viewed as a distributed real time system. Some of the current research issues being examined to extend the framework of the IMRS to meet its performance goals are presented. These issues include the use of communication coprocessors to enhance performance, the distribution of tasks and the methods of providing fault tolerance in the IMRS. An application example of real time collision detection, as it relates to the IMRS concept, is also presented and discussed.

  13. Image change detection systems, methods, and articles of manufacture

    DOEpatents

    Jones, James L.; Lassahn, Gordon D.; Lancaster, Gregory D.

    2010-01-05

    Aspects of the invention relate to image change detection systems, methods, and articles of manufacture. According to one aspect, a method of identifying differences between a plurality of images is described. The method includes loading a source image and a target image into memory of a computer, constructing source and target edge images from the source and target images to enable processing of multiband images, displaying the source and target images on a display device of the computer, aligning the source and target edge images, switching displaying of the source image and the target image on the display device, to enable identification of differences between the source image and the target image.

  14. Integrating a distributed, agile, virtual enterprise in the TEAM program

    NASA Astrophysics Data System (ADS)

    Cobb, C. K.; Gray, W. Harvey; Hewgley, Robert E.; Klages, Edward J.; Neal, Richard E.

    1997-01-01

    The technologies enabling agile manufacturing (TEAM) program enhances industrial capability by advancing and deploying manufacturing technologies that promote agility. TEAM has developed a product realization process that features the integration of product design and manufacturing groups. TEAM uses the tools it collects, develops, and integrates in support of the product realization process to demonstrate and deploy agile manufacturing capabilities for three high- priority processes identified by industry: material removal, forming, and electromechanical assembly. In order to provide a proof-of-principle, the material removal process has been addressed first and has been successfully demonstrate din an 'interconnected' mode. An internet-accessible intersite file manager (IFM) application has been deployed to allow geographically distributed TEAM participants to share and distribute information as the product realization process is executed. An automated inspection planning application has been demonstrated, importing a solid model form the IFM, generating an inspection plan and a part program to be used in the inspection process, and then distributing the part program to the inspection site via the IFM. TEAM seeks to demonstrate the material removal process in an integrated mode in June 1997 complete with an object-oriented framework and infrastructure. The current status and future plans for this project are presented here.

  15. Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

    SciTech Connect

    Schriner, H.; Davies, B.; Sniegowski, J.; Rodgers, M.S.; Allen, J.; Shepard, C.

    1998-05-01

    Research and development in the design and manufacture of Microelectromechanical Systems (MEMS) is growing at an enormous rate. Advances in MEMS design tools and fabrication processes at Sandia National Laboratories` Microelectronics Development Laboratory (MDL) have broadened the scope of MEMS applications that can be designed and manufactured for both military and commercial use. As improvements in micromachining fabrication technologies continue to be made, MEMS designs can become more complex, thus opening the door to an even broader set of MEMS applications. In an effort to further research and development in MEMS design, fabrication, and application, Sandia National Laboratories has launched the Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program or SAMPLES program. The SAMPLES program offers potential partners interested in MEMS the opportunity to prototype an idea and produce hardware that can be used to sell a concept. The SAMPLES program provides education and training on Sandia`s design tools, analysis tools and fabrication process. New designers can participate in the SAMPLES program and design MEMS devices using Sandia`s design and analysis tools. As part of the SAMPLES program, participants` designs are fabricated using Sandia`s 4 level polycrystalline silicon surface micromachine technology fabrication process known as SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology). Furthermore, SAMPLES participants can also opt to obtain state of the art, post-fabrication services provided at Sandia such as release, packaging, reliability characterization, and failure analysis. This paper discusses the components of the SAMPLES program.

  16. Software ``Best'' Practices: Agile Deconstructed

    NASA Astrophysics Data System (ADS)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  17. Sustainable Manufacturing System Focusing on the Natural Growth of Bamboo

    NASA Astrophysics Data System (ADS)

    Ogawa, Keiji; Hirogaki, Toshiki; Aoyama, Eiichi; Taniguchi, Mitsuaki; Ogawa, Sachiko

    Recently, sustainable materials have attracted attention because of the need to alleviate environmental problems. Bamboo, in particular, has attracted attention as a sustainable material because it has the fastest natural growth rate among various natural materials. A self-bonding fiberboard using high quality bamboo fiber extracted with a machining center has been enabled to be fabricated by hot press forming. Therefore, we propose a sustainable manufacturing system that focuses on bamboo. An environmental impact of our system was evaluated by life cycle assessment (LCA), comparing with a glass fiber reinforced plastic production. Additionally, based on the LCA result, higher efficient fiber extraction process was proposed by an application of in-situ measurement of uninformed bamboo shape with irregularity.

  18. System and method for manufacture of airfoil components

    SciTech Connect

    Moors, Thomas Michael

    2016-11-29

    Embodiments of the present disclosure relate generally to systems and methods for manufacturing an airfoil component. The system can include: a geometrical mold; an elongated flexible sleeve having a closed-off interior and positioned within the geometrical mold, wherein the elongated flexible sleeve is further positioned to have a desired geometry; an infusing channel in fluid communication with the closed-off interior of the elongated flexible sleeve and configured to communicate a resinous material thereto; a vacuum channel in fluid communication with the closed-off interior of the elongated flexible sleeve and configured to vacuum seal the closed-off interior of the elongated flexible sleeve; and a glass fiber layer positioned within the closed-off interior of the elongated flexible sleeve.

  19. What Does an Agile Coach Do?

    NASA Astrophysics Data System (ADS)

    Davies, Rachel; Pullicino, James

    The surge in Agile adoption has created a demand for project managers rather than direct their teams. A sign of this trend is the ever-increasing number of people getting certified as scrum masters and agile leaders. Training courses that introduce agile practices are easy to find. But making the transition to coach is not as simple as understanding what agile practices are. Your challenge as an Agile Coach is to support your team in learning how to wield their new Agile tools in creating great software.

  20. Vibration control for precision manufacturing at Sandia National Laboratories

    SciTech Connect

    Hinnerichs, T.; Martinez, D.

    1995-04-01

    Sandia National Laboratories performs R and D in structural dynamics and vibration suppression for precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and ``smart`` structures and material systems. In addition, Sandia has focused major resources towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process currently in place at Sandia that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

  1. Vibration control for precision manufacturing at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Hinnerichs, Terry; Martinez, David

    Sandia National Laboratories performs R&D in structural dynamics and vibration suppression for precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and 'smart' structures and material systems. In addition, Sandia has focused major resources towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process currently in place at Sandia that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

  2. Vibration control for precision manufacturing at Sandia National Laboratories

    NASA Astrophysics Data System (ADS)

    Hinnerichs, Terry D.; Martinez, David R.

    1995-05-01

    Sandia National Laboratories performs R&D in structural dynamics and vibration suppression of precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and 'smart' structures and material systems, In addition, major resources have been focused towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

  3. Atmospheric Pressure Low Temperature Plasma System for Additive Manufacturing

    NASA Astrophysics Data System (ADS)

    Burnette, Matthew; Staack, David

    2016-09-01

    There is growing interest in using plasmas for additive manufacturing, however these methods use high temperature plasmas to melt the material. We have developed a novel technique of additive manufacturing using a low temperature dielectric barrier discharge (DBD) jet. The jet is attached to the head of a 3D printer to allow for precise control of the plasma's location. Various methods are employed to deposit the material, including using a vaporized precursor or depositing a liquid precursor directly onto the substrate or into the plasma via a nebulizer. Various materials can be deposited including metals (copper using copper (II) acetylacetonate), polymers (PMMA using the liquid monomer), and various hydrocarbon compounds (using alcohols or a 100% methane DBD jet). The rastering pattern for the 3D printer was modified for plasma deposition, since it was originally designed for thermoplastic extrusion. The design constraints for fill pattern selection for the plasma printer are influenced by substrate heating, deposition area, and precursor consumption. Depositions onto pressure and/or temperature sensitive substrates can be easily achieved. Deposition rates range up to 0.08 cm3/hr using tris(2-methoxyethoxy)(vinyl)silane, however optimization can still be done on the system to improve the deposition rate. For example higher concentration of precursor can be combined with faster motion and higher discharge powers to increase the deposition rate without overheating the substrate.

  4. A CORBA-based manufacturing environment

    SciTech Connect

    Pancerella, C.M.; Whiteside, R.A.; Klevgard, P.A.

    1996-08-01

    A CORBA-based distributed object software system was developed for Sandia`s Agile Manufacturing Testbed (SAMT). This information architecture supports the goals of agile manufacturing: rapid response to changing requirements; small lot machining; reduction in both time and cost of the product realization process; and integration within a heterogeneous, wide-area networked enterprise. Features of the resulting software-controlled manufacturing environment are: (1) Easy plug-and-play of manufacturing devices. (2) Support for both automated and manual operations. (3) Information flow both into and out of manufacturing devices. (4) Dynamic task sequencer. Each of the heterogeneous physical objects (lathe, milling machine, robot arm, etc.) has a corresponding software object that supports a common IDL interface called IDevice. This interface provides operations for material processing, material movement, status monitoring, and other administrative tasks. CORBA objects allow for the encapsulation of a machine tool, its controller, and the network interface to the controller. Both manual and automated operations are supported by the software system. If an IDevice object receives a request for a non-automated operation, it uses an associated Console object to affect the operation by communications with a human machinist. A design goal of the Console object for a machine is to provide an information-intensive environment for the machinist, rather than just the transmittal of instructions to be carried out. In addition to the flow of information into manufacturing devices (e.g., control and NC code), the software architecture supports the easy extraction of data (e.g., sensor data or inspection reports) back out of the machine and into the broader information processing environment The task sequencer object dynamically locates devices, accepts jobs, and dispatches tasks in the manufacturing cell. A job script captures setup operations, material movement, and processing.

  5. Reflections on Software Agility and Agile Methods: Challenges, Dilemmas, & the Way Ahead

    DTIC Science & Technology

    2005-05-11

    Mellon University 10 Research Team Richard Baskerville and Balasubramanian Ramesh Department of Computer Information Systems, Georgia State University...University 38 References Agile Manifesto. http://agilemanifesto.org/ Baskerville , R., Pries-Heje, J., Levine, L., & Ramesh, B. (2005). The high speed...balancing game: How software companies cope with Internet speed. Scandinavian Journal of Information Systems 16, 11-54. Baskerville , R., Levine, L

  6. The Impacts of Agile Development Methodology Use on Project Success: A Contingency View

    ERIC Educational Resources Information Center

    Tripp, John F.

    2012-01-01

    Agile Information Systems Development Methods have emerged in the past decade as an alternative manner of managing the work and delivery of information systems development teams, with a large number of organizations reporting the adoption & use of agile methods. The practitioners of these methods make broad claims as to the benefits of their…

  7. Advanced manufacturing by spray forming: Aluminum strip and microelectromechanical systems

    SciTech Connect

    McHugh, K.M.

    1994-12-31

    Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. INEL is developing a unique spray-forming method based on de Laval (converging/diverging) nozzle designs to produce near-net-shape solids and coatings of metals, polymers, and composite materials. Properties of the spray-formed material are tailored by controlling the characteristics of the spray plume and substrate. Two examples are described: high-volume production of aluminum alloy strip, and the replication of micron-scale features in micropatterned polymers during the production of microelectromechanical systems.

  8. Cellular Manufacturing System with Dynamic Lot Size Material Handling

    NASA Astrophysics Data System (ADS)

    Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

    2016-02-01

    Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

  9. Undergraduate Quality Management Project: Motorcycle Manufacturer Vendor Rating System

    ERIC Educational Resources Information Center

    Baker, James; McHaney, Roger

    2009-01-01

    A major motorcycle vendor, based in the U.S. Midwest, is the world's largest custom V-Twin motorcycle manufacturer and domestically the second largest motorcycle manufacturer behind Harley-Davidson. This project describes the process used used by a K-State undergraduate distance learning student to design and develop the initial version of a…

  10. Particle dispersing system and method for testing semiconductor manufacturing equipment

    DOEpatents

    Chandrachood, Madhavi; Ghanayem, Steve G.; Cantwell, Nancy; Rader, Daniel J.; Geller, Anthony S.

    1998-01-01

    The system and method prepare a gas stream comprising particles at a known concentration using a particle disperser for moving particles from a reservoir of particles into a stream of flowing carrier gas. The electrostatic charges on the particles entrained in the carrier gas are then neutralized or otherwise altered, and the resulting particle-laden gas stream is then diluted to provide an acceptable particle concentration. The diluted gas stream is then split into a calibration stream and the desired output stream. The particles in the calibration stream are detected to provide an indication of the actual size distribution and concentration of particles in the output stream that is supplied to a process chamber being analyzed. Particles flowing out of the process chamber within a vacuum pumping system are detected, and the output particle size distribution and concentration are compared with the particle size distribution and concentration of the calibration stream in order to determine the particle transport characteristics of a process chamber, or to determine the number of particles lodged in the process chamber as a function of manufacturing process parameters such as pressure, flowrate, temperature, process chamber geometry, particle size, particle charge, and gas composition.

  11. Biorobotics: using robots to emulate and investigate agile locomotion.

    PubMed

    Ijspeert, Auke J

    2014-10-10

    The graceful and agile movements of animals are difficult to analyze and emulate because locomotion is the result of a complex interplay of many components: the central and peripheral nervous systems, the musculoskeletal system, and the environment. The goals of biorobotics are to take inspiration from biological principles to design robots that match the agility of animals, and to use robots as scientific tools to investigate animal adaptive behavior. Used as physical models, biorobots contribute to hypothesis testing in fields such as hydrodynamics, biomechanics, neuroscience, and prosthetics. Their use may contribute to the design of prosthetic devices that more closely take human locomotion principles into account.

  12. The effects of habitat fragmentation on the social kin structure and mating system of the agile antechinus, Antechinus agilis.

    PubMed

    Banks, S C; Ward, S J; Lindenmayer, D B; Finlayson, G R; Lawson, S J; Taylor, A C

    2005-05-01

    Habitat fragmentation is one of the major contributors to the loss of biodiversity worldwide. However, relatively little is known about its more immediate impacts on within-patch population processes such as social structure and mating systems, whose alteration may play an important role in extinction risk. We investigated the impacts of habitat fragmentation due to the establishment of an exotic softwood plantation on the social kin structure and breeding system of the Australian marsupial carnivore, Antechinus agilis. Restricted dispersal by males in fragmented habitat resulted in elevated relatedness among potential mates in populations in fragments, potentially increasing the risk of inbreeding. Antechinus agilis nests communally in tree hollows; these nests are important points for social contact between males and females in the mating season. In response to elevated relatedness among potential mates in fragmented habitat, A. agilis significantly avoided sharing nests with opposite-sex relatives in large fragment sites (but not in small ones, possibly due to limited nest locations and small population sizes). Because opposite-sex individuals shared nests randomly with respect to relatedness in unfragmented habitat, we interpreted the phenomenon in fragmented habitat as a precursor to inbreeding avoidance via mate choice. Despite evidence that female A. agilis at high inbreeding risk selected relatively unrelated mates, there was no overall increased avoidance of related mates by females in fragmented habitats compared to unfragmented habitats. Simulations indicated that only dispersal, and not nonrandom mating, contributed to inbreeding avoidance in either habitat context. However, habitat fragmentation did influence the mating system in that the degree of multiple paternity was reduced due to the reduction in population sizes and population connectivity. This, in turn, reduced the number of males available to females in the breeding season. This suggests that

  13. Agile Development of Advanced Prototypes

    DTIC Science & Technology

    2014-11-01

    genetically modified babies. A case where researchers supplemented women’s defective mitochondria with healthy mitochondria from a donor was...and immersive experience showing genetic engineering’s implication for the future of medicine. 15. SUBJECT TERMS Agile Development, Games for...provoking perspective on genetic engineering’s implication for the future of medicine. Experiencing Living with Prostheses (Xense) During this period

  14. Extreme Agility Micro Aerial Vehicle - Control of Hovering Maneuvers for a Mini-Aerial Vehicle with an Onboard Autopilot System

    DTIC Science & Technology

    2011-02-01

    montré que les commandes d’accélérateur ont compensé les effets des ailerons par une fonction d’anticipation, réduit l’erreur de tenue d’altitude à...expérimentales ont montré que les commandes d’accélérateur qui ont été compensées pour les effets des ailerons par une fonction d’anticipation, a réduit l’erreur...with a predictive error method found in the pro- cess identification tool from the Matlab system identification toolbox. A sampling time of 0.05 s was

  15. Hybrid additive manufacturing of 3D electronic systems

    NASA Astrophysics Data System (ADS)

    Li, J.; Wasley, T.; Nguyen, T. T.; Ta, V. D.; Shephard, J. D.; Stringer, J.; Smith, P.; Esenturk, E.; Connaughton, C.; Kay, R.

    2016-10-01

    A novel hybrid additive manufacturing (AM) technology combining digital light projection (DLP) stereolithography (SL) with 3D micro-dispensing alongside conventional surface mount packaging is presented in this work. This technology overcomes the inherent limitations of individual AM processes and integrates seamlessly with conventional packaging processes to enable the deposition of multiple materials. This facilitates the creation of bespoke end-use products with complex 3D geometry and multi-layer embedded electronic systems. Through a combination of four-point probe measurement and non-contact focus variation microscopy, it was identified that there was no obvious adverse effect of DLP SL embedding process on the electrical conductivity of printed conductors. The resistivity maintained to be less than 4  ×  10-4 Ω · cm before and after DLP SL embedding when cured at 100 °C for 1 h. The mechanical strength of SL specimens with thick polymerized layers was also identified through tensile testing. It was found that the polymerization thickness should be minimised (less than 2 mm) to maximise the bonding strength. As a demonstrator a polymer pyramid with embedded triple-layer 555 LED blinking circuitry was successfully fabricated to prove the technical viability.

  16. Brain cancer mortality at a manufacturer of aerospace electromechanical systems.

    PubMed

    Park, R M; Silverstein, M A; Green, M A; Mirer, F E

    1990-01-01

    Standardized proportional mortality ratios and mortality odds ratios were calculated for 583 deaths between 1950 and 1986 among employees who had worked for at least 10 years at a facility manufacturing missile and aircraft guidance systems. There was a statistically significant excess of brain cancer proportional mortality (PMR = 16/3.8 = 4.2, p = .0001). Among hourly employees, 12 brain cancer deaths occurred for 2.7 expected (PMR = 4.4, p = .00005). The PMR for brain cancer increased from 1.8 (p = .45) among hourly workers with less than 20 years to 8.7 (p = .000003) in those with more than 20 years employment. Work in "clean rooms," where gyroscopes were assembled, was associated with the brain cancer excess but did not fully account for it. Among 105 deceased hourly women, all three brain cancer deaths occurred among gyro assemblers working in clean rooms, and the risk increased with duration in clean rooms. Although the proportion of brain cancer deaths among hourly men with clean-room experience was similar to that for women, only three of the seven male brain cancer deaths occurred in this group. The suspect agents include gyro fluids and chlorofluorocarbon solvents.

  17. A framework for development of an intelligent system for design and manufacturing of stamping dies

    NASA Astrophysics Data System (ADS)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  18. SU-E-T-610: Comparison of Treatment Times Between the MLCi and Agility Multileaf Collimators

    SciTech Connect

    Ramsey, C; Bowling, J

    2014-06-01

    Purpose: The Agility is a new 160-leaf MLC developed by Elekta for use in their Infinity and Versa HD linacs. As compared to the MLCi, the Agility increased the maximum leaf speed from 2 cm/s to 3.5 cm/s, and the maximum primary collimator speed from 1.5 cm/s to 9.0 cm/s. The purpose of this study was to determine if the Agility MLC resulted in improved plan quality and/or shorter treatment times. Methods: An Elekta Infinity that was originally equipped with a 80 leaf MLCi was upgraded to an 160 leaf Agility. Treatment plan quality was evaluated using the Pinnacle planning system with SmartArc. Optimization was performed once for the MLCi and once for the Agility beam models using the same optimization parameters and the same number of iterations. Patient treatment times were measured for all IMRT, VMAT, and SBRT patients treated on the Infinity with the MLCi and Agility MLCs. Treatment times were extracted from the EMR and measured from when the patient first walked into the treatment room until exiting the treatment room. Results: 11,380 delivery times were measured for patients treated with the MLCi, and 1,827 measurements have been made for the Agility MLC. The average treatment times were 19.1 minutes for the MLCi and 20.8 minutes for the Agility. Using a t-test analysis, there was no difference between the two groups (t = 0.22). The dose differences between patients planned with the MLCi and the Agility MLC were minimal. For example, the dose difference for the PTV, GTV, and cord for a head and neck patient planned using Pinnacle were effectively equivalent. However, the dose to the parotid glands was slightly worse with the Agility MLC. Conclusion: There was no statistical difference in treatment time, or any significant dosimetric difference between the Agility MLC and the MLCi.

  19. Autonomous Agents for Dynamic Process Planning in the Flexible Manufacturing System

    NASA Astrophysics Data System (ADS)

    Nik Nejad, Hossein Tehrani; Sugimura, Nobuhiro; Iwamura, Koji; Tanimizu, Yoshitaka

    Rapid changes of market demands and pressures of competition require manufacturers to maintain highly flexible manufacturing systems to cope with a complex manufacturing environment. This paper deals with development of an agent-based architecture of dynamic systems for incremental process planning in the manufacturing systems. In consideration of alternative manufacturing processes and machine tools, the process plans and the schedules of the manufacturing resources are generated incrementally and dynamically. A negotiation protocol is discussed, in this paper, to generate suitable process plans for the target products real-timely and dynamically, based on the alternative manufacturing processes. The alternative manufacturing processes are presented by the process plan networks discussed in the previous paper, and the suitable process plans are searched and generated to cope with both the dynamic changes of the product specifications and the disturbances of the manufacturing resources. We initiatively combine the heuristic search algorithms of the process plan networks with the negotiation protocols, in order to generate suitable process plans in the dynamic manufacturing environment.

  20. 21 CFR 821.25 - Device tracking system and content requirements: manufacturer requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Device tracking system and content requirements... Requirements § 821.25 Device tracking system and content requirements: manufacturer requirements. (a) A... distributes that enables a manufacturer to provide FDA with the following information in writing for...

  1. Relationship Between Reactive Agility and Change of Direction Speed in Amateur Soccer Players.

    PubMed

    Matlák, János; Tihanyi, József; Rácz, Levente

    2016-06-01

    The aim of the study was to assess the relationship between reactive agility and change of direction speed (CODS) among amateur soccer players using running tests with four directional changes. Sixteen amateur soccer players (24.1 ± 3.3 years; 72.4 ± 7.3 kg; 178.7 ± 6 cm) completed CODS and reactive agility tests with four changes of direction using the SpeedCourt™ system (Globalspeed GmbH, Hemsbach, Germany). Countermovement jump (CMJ) height and maximal foot tapping count (completed in 3 seconds) were also measured with the same device. In the reactive agility test, participants had to react to a series of light stimuli projected onto a screen. Total time was shorter in the CODS test than in the reactive agility test (p < 0.001). Nonsignificant correlations were found among variables measured in the CODS, reactive agility, and CMJ tests. Low common variance (r = 0.03-0.18) was found between CODS and reactive agility test variables. The results of this study underscore the importance of cognitive factors in reactive agility performance and suggest that specific methods may be required for training and testing reactive agility and CODS.

  2. Lead making for improved continuous-flow manufacturing systems

    NASA Astrophysics Data System (ADS)

    Heintzman, P.

    The importance of the latest in connector technology, chip carriers, surface mounted devices, and high density interconnects not withstanding, the foreseeable future of most durable goods includes designs in which discrete wires play a significant role. As long as user operated electro-mechanical controls exist for widely spaced functional components such as motors, relays, and safety switches, discrete wiring harnesses will continue to be a major concern of original equipment manufacturers. Economy and productivity must be maintained in spite of competitive pressures which demand expanded product lines and carefully controlled component inventories, manufacturing schedules, and deliveries. This paper explores some of the options available to answer these needs as they relate to discrete wiring and harnessing. Not only is available manufacturing hardware analyzed in terms of production capabilities but also in-house and vendor supply source alternatives are considered.

  3. Best Manufacturing Practices Survey Conducted at Texas Instruments, Defense Systems and Electronics Group, Lewisville, Texas

    DTIC Science & Technology

    1986-05-01

    government non-acceptance of digitized data as "master" drawings, government furnished equipment impact on just - in - time manufacturing , and insufficient...of this concept were observed. TI personnel indicated that the systems were accurate and reliable. JUST - IN - TIME MANUFACTURING One of the most... in - time manufacturing have been imple- mented in several areas. TI has removed the human error factor and instituted complete automation of operations

  4. Nanoimprint system development and status for high volume semiconductor manufacturing

    NASA Astrophysics Data System (ADS)

    Hiura, Hiromi; Takabayashi, Yukio; Takashima, Tsuneo; Emoto, Keiji; Choi, Jin; Schumaker, Phil

    2016-10-01

    Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash Imprint Lithography* (J-FIL*) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. There are many criteria that determine whether a particular technology is ready for wafer manufacturing. For imprint lithography, recent attention has been given to the areas of overlay, throughput, defectivity, and mask replication. This paper reviews progress in these critical areas. Recent demonstrations have proven that mix and match overlay of less than 5nm can achieved. Further reductions require a higher order correction system. Modeling and experimental data are presented which provide a path towards reducing the overlay errors to less than 3nm. Throughput is mainly impacted by the fill time of the relief images on the mask. Improvement in resist materials provides a solution that allows 15 wafers per hour per station, or a tool throughput of 60 wafers per hour. Defectivity and mask life play a significant role relative to meeting the cost of ownership (CoO) requirements in the production of semiconductor devices. Hard particles on a wafer or mask create the possibility of inducing a permanent defect on the mask that can impact device yield and mask life. By using material methods to reduce particle shedding and by introducing an air curtain system, the lifetime of both the master mask and the replica mask can be extended. In this work, we report results that demonstrate a path towards achieving mask lifetimes of better than 1000 wafers. Finally, on the mask side, a new replication tool, the FPA-1100NR2 is

  5. Holistic Context-Sensitivity for Run-Time Optimization of Flexible Manufacturing Systems.

    PubMed

    Scholze, Sebastian; Barata, Jose; Stokic, Dragan

    2017-02-24

    Highly flexible manufacturing systems require continuous run-time (self-) optimization of processes with respect to diverse parameters, e.g., efficiency, availability, energy consumption etc. A promising approach for achieving (self-) optimization in manufacturing systems is the usage of the context sensitivity approach based on data streaming from high amount of sensors and other data sources. Cyber-physical systems play an important role as sources of information to achieve context sensitivity. Cyber-physical systems can be seen as complex intelligent sensors providing data needed to identify the current context under which the manufacturing system is operating. In this paper, it is demonstrated how context sensitivity can be used to realize a holistic solution for (self-) optimization of discrete flexible manufacturing systems, by making use of cyber-physical systems integrated in manufacturing systems/processes. A generic approach for context sensitivity, based on self-learning algorithms, is proposed aiming at a various manufacturing systems. The new solution encompasses run-time context extractor and optimizer. Based on the self-learning module both context extraction and optimizer are continuously learning and improving their performance. The solution is following Service Oriented Architecture principles. The generic solution is developed and then applied to two very different manufacturing processes.

  6. Holistic Context-Sensitivity for Run-Time Optimization of Flexible Manufacturing Systems

    PubMed Central

    Scholze, Sebastian; Barata, Jose; Stokic, Dragan

    2017-01-01

    Highly flexible manufacturing systems require continuous run-time (self-) optimization of processes with respect to diverse parameters, e.g., efficiency, availability, energy consumption etc. A promising approach for achieving (self-) optimization in manufacturing systems is the usage of the context sensitivity approach based on data streaming from high amount of sensors and other data sources. Cyber-physical systems play an important role as sources of information to achieve context sensitivity. Cyber-physical systems can be seen as complex intelligent sensors providing data needed to identify the current context under which the manufacturing system is operating. In this paper, it is demonstrated how context sensitivity can be used to realize a holistic solution for (self-) optimization of discrete flexible manufacturing systems, by making use of cyber-physical systems integrated in manufacturing systems/processes. A generic approach for context sensitivity, based on self-learning algorithms, is proposed aiming at a various manufacturing systems. The new solution encompasses run-time context extractor and optimizer. Based on the self-learning module both context extraction and optimizer are continuously learning and improving their performance. The solution is following Service Oriented Architecture principles. The generic solution is developed and then applied to two very different manufacturing processes. PMID:28245564

  7. 76 FR 77149 - Authority To Manufacture and Distribute Postage Evidencing Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-12

    ... 501 Authority To Manufacture and Distribute Postage Evidencing Systems AGENCY: Postal Service\\TM... Evidencing Systems (PES) to safeguard customer information and maintain regulatory controls over agents... through Friday, at the Payment Technology office. FOR FURTHER INFORMATION CONTACT: Hank Heren,...

  8. Manufacturing Advantage: Why High-Performance Work Systems Pay Off.

    ERIC Educational Resources Information Center

    Appelbaum, Eileen; Bailey, Thomas; Berg, Peter; Kalleberg, Arne L.

    A study examined the relationship between high-performance workplace practices and the performance of plants in the following manufacturing industries: steel, apparel, and medical electronic instruments and imaging. The multilevel research methodology combined the following data collection activities: (1) site visits; (2) collection of plant…

  9. An Investigation of Agility Issues in Scrum Teams Using Agility Indicators

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Wang, Xiaofeng

    Agile software development methods have emerged and become increasingly popular in recent years; yet the issues encountered by software development teams that strive to achieve agility using agile methods are yet to be explored systematically. Built upon a previous study that has established a set of indicators of agility, this study investigates what issues are manifested in software development teams using agile methods. It is focussed on Scrum teams particularly. In other words, the goal of the chapter is to evaluate Scrum teams using agility indicators and therefore to further validate previously presented agility indicators within the additional cases. A multiple case study research method is employed. The findings of the study reveal that the teams using Scrum do not necessarily achieve agility in terms of team autonomy, sharing, stability and embraced uncertainty. The possible reasons include previous organizational plan-driven culture, resistance towards the Scrum roles and changing resources.

  10. Gender-specific influences of balance, speed, and power on agility performance.

    PubMed

    Sekulic, Damir; Spasic, Miodrag; Mirkov, Dragan; Cavar, Mile; Sattler, Tine

    2013-03-01

    The quick change of direction (i.e., agility) is an important athletic ability in numerous sports. Because of the diverse and therefore hardly predictable manifestations of agility in sports, studies noted that the improvement in speed, power, and balance should result in an improvement of agility. However, there is evident lack of data regarding the influence of potential predictors on different agility manifestations. The aim of this study was to determine the gender-specific influence of speed, power, and balance on different agility tests. A total of 32 college-aged male athletes and 31 college-aged female athletes (age 20.02 ± 1.89 years) participated in this study. The subjects were mostly involved in team sports (soccer, team handball, basketball, and volleyball; 80% of men, and 75% of women), martial arts, gymnastics, and dance. Anthropometric variables consisted of body height, body weight, and the body mass index. Five agility tests were used: a t-test (T-TEST), zig-zag test, 20-yard shuttle test, agility test with a 180-degree turn, and forward-backward running agility test (FWDBWD). Other tests included 1 jumping ability power test (squat jump, SQJ), 2 balance tests to determine the overall stability index and an overall limit of stability score (both measured by Biodex Balance System), and 2 running speed tests using a straight sprint for 10 and 20 m (S10 and S20, respectively). A reliability analysis showed that all the agility tests were reliable. Multiple regression and correlation analysis found speed and power (among women), and balance (among men), as most significant predictors of agility. The highest Pearson's correlation in both genders is found between the results of the FWDBWD and S10M tests (0.77 and 0.81 for men and women, respectively; p < 0.05). Power, measured using the SQJ, is significantly (p < 0.05) related to FWDBWD and T-TEST results but only for women (-0.44; -0.41). The balance measures were significantly related to the agility

  11. Northwest Manufacturing Initiative

    DTIC Science & Technology

    2013-03-26

    structural and armor alloys and their weldments, as well as the development of agile, reconfigurable automated manufacturing environments. These...included construction of a work cell around the Fanuc M16 robot to simulate the installation of a window or windshield panel. The vacuum grip end effecter...lower strength alloys would further increase productivity of the tandem wire time twin process. The use of a double -V- groove joint for both welding

  12. Barriers to Achieving Mentally Agile Junior Leaders

    DTIC Science & Technology

    2009-01-21

    To help answer this question, this paper will describe the operational environment the agile leader must be prepared to operate within and the...senior leadership identified their need over eight years ago? To help answer this question, this paper will describe the operational environment the agile...to the reader. BARRIERS TO ACHIEVING MENTALLY AGILE JUNIOR LEADERS Persistent conflict and change characterize the strategic environment . We have

  13. Assessment of proposed fighter agility metrics

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.; Downing, David R.

    1990-01-01

    This paper presents the results of an analysis of proposed metrics to assess fighter aircraft agility. A novel framework for classifying these metrics is developed and applied. A set of transient metrics intended to quantify the axial and pitch agility of fighter aircraft is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction method are proposed, and sensitivities to pilot introduced errors during flight testing is investigated. Results indicate that the power onset and power loss parameters are promising candidates for quantifying axial agility, while maximum pitch up and pitch down rates are for quantifying pitch agility.

  14. Cross Sectional Study of Agile Software Development Methods and Project Performance

    ERIC Educational Resources Information Center

    Lambert, Tracy

    2011-01-01

    Agile software development methods, characterized by delivering customer value via incremental and iterative time-boxed development processes, have moved into the mainstream of the Information Technology (IT) industry. However, despite a growing body of research which suggests that a predictive manufacturing approach, with big up-front…

  15. Silicon Valley's Processing Needs versus San Jose State University's Manufacturing Systems Processing Component: Implications for Industrial Technology

    ERIC Educational Resources Information Center

    Obi, Samuel C.

    2004-01-01

    Manufacturing professionals within universities tend to view manufacturing systems from a global perspective. This perspective tends to assume that manufacturing processes are employed equally in every manufacturing enterprise, irrespective of the geography and the needs of the people in those diverse regions. But in reality local and societal…

  16. Manufacturing Systems. Grades 9-10. Course #8115 (Semester). Technology Education Course Guide. Industrial Arts/Technology Education.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

    The course materials included in this guide are intended to introduce students to the manufacturing industry and its relationships with society, individuals, and the environment. The following topics are covered in the nine learning modules: manufacturing and society and manufacturing systems; manufacturing materials and processes (types of…

  17. Manufacturing Technology Support (MATES II) Task Order 0005: Manufacturing Integration and Technology Evaluation to Enable Technology Transition. Subtask Phase 0 Study Task: Manufacturing Technology (ManTech) and Systems Engineering For Quick Reaction Systems

    DTIC Science & Technology

    2014-10-01

    UQ, and leftward implementation of system engineering technologies) to achieve a long - term MT improvement and subsequent sustainment. 7 4 MT...NAS 3-20378, prepared for NASA-Lewis Research Center, NASA CR -135203 (1977). 13. A. Lambourne, Spray forming of Si-Al Alloys for Thermal Management...the maturation of new Manufacturing Technologies, and reduce the risk associated with implementation. 15. SUBJECT TERMS manufacturing technology

  18. Shared and service-oriented CNC machining system for intelligent manufacturing process

    NASA Astrophysics Data System (ADS)

    Li, Yao; Liu, Qiang; Tong, Ronglei; Cui, Xiaohong

    2015-11-01

    To improve efficiency, reduce cost, ensure quality effectively, researchers on CNC machining have focused on virtual machine tool, cloud manufacturing, wireless manufacturing. However, low level of information shared among different systems is a common disadvantage. In this paper, a machining database with data evaluation module is set up to ensure integrity and update. An online monitoring system based on internet of things and multi-sensors "feel" a variety of signal features to "percept" the state in CNC machining process. A high efficiency and green machining parameters optimization system "execute" service-oriented manufacturing, intelligent manufacturing and green manufacturing. The intelligent CNC machining system is applied in production. CNC machining database effectively shares and manages process data among different systems. The prediction accuracy of online monitoring system is up to 98.8% by acquiring acceleration and noise in real time. High efficiency and green machining parameters optimization system optimizes the original processing parameters, and the calculation indicates that optimized processing parameters not only improve production efficiency, but also reduce carbon emissions. The application proves that the shared and service-oriented CNC machining system is reliable and effective. This research presents a shared and service-oriented CNC machining system for intelligent manufacturing process.

  19. Using the Agile Development Methodology and Applying Best Practice Project Management Processes

    DTIC Science & Technology

    2014-12-01

    detrimental to a system architecture function. Proponents of Agile argue that developers in the waterfall 25 development get trapped in “ analysis ...limited to very small web-based socio-technical systems . (Krutchen 2010, 497) 2 . Agile Team Responsibilities So, who on the scrum team is...the use of a sprint 0 in which the system architect, heretofore singularly referred to but reflecting an individual or team approach, will take the

  20. Agility: Agent - Ility Architecture

    DTIC Science & Technology

    2002-10-01

    Figure 2: Overview of eGents 9 Specific scientific and engineering subgoals were: • develop a lightweight agent system that uses email- based ...applets makes them hard to operate over corporate firewalls. eGents e - mail based ACL bus imposes fewer requirements on agents that use it, and firewalls...do not pose a problem for an e - mail based ACL bus. While applets limit 35 JATLites range of applications, they also make JATlite easy to deploy

  1. Agile robotic edge finishing

    SciTech Connect

    Powell, M.

    1996-08-01

    Edge finishing processes have seemed like ideal candidates for automation. Most edge finishing processes are unpleasant, dangerous, tedious, expensive, not repeatable and labor intensive. Estimates place the cost of manual edge finishing processes at 12% of the total cost of fabricating precision parts. For small, high precision parts, the cost of hand finishing may be as high as 305 of the total part cost. Up to 50% of this cost could be saved through automation. This cost estimate includes the direct costs of edge finishing: the machining hours required and the 30% scrap and rework rate after manual finishing. Not included in these estimates are the indirect costs resulting from cumulative trauma disorders and retraining costs caused by the high turnover rate for finishing jobs.. Despite the apparent economic advantages, edge finishing has proven difficult to automate except in low precision and/or high volume production environments. Finishing automation systems have not been deployed successfully in Department of Energy defense programs (DOE/DP) production, A few systems have been attempted but have been subsequently abandoned for traditional edge finishing approaches: scraping, grinding, and filing the edges using modified dental tools and hand held power tools. Edge finishing automation has been an elusive but potentially lucrative production enhancement. The amount of time required for reconfiguring workcells for new parts, the time required to reprogram the workcells to finish new parts, and automation equipment to respond to fixturing errors and part tolerances are the most common reasons cited for eliminating automation as an option for DOE/DP edge finishing applications. Existing automated finishing systems have proven to be economically viable only where setup and reprogramming costs are a negligible fraction of overall production costs.

  2. Multiply-agile encryption in high speed communication networks

    SciTech Connect

    Pierson, L.G.; Witzke, E.L.

    1997-05-01

    Different applications have different security requirements for data privacy, data integrity, and authentication. Encryption is one technique that addresses these requirements. Encryption hardware, designed for use in high-speed communications networks, can satisfy a wide variety of security requirements if that hardware is key-agile, robustness-agile and algorithm-agile. Hence, multiply-agile encryption provides enhanced solutions to the secrecy, interoperability and quality of service issues in high-speed networks. This paper defines these three types of agile encryption. Next, implementation issues are discussed. While single-algorithm, key-agile encryptors exist, robustness-agile and algorithm-agile encryptors are still research topics.

  3. Agile parallel bioinformatics workflow management using Pwrake

    PubMed Central

    2011-01-01

    Background In bioinformatics projects, scientific workflow systems are widely used to manage computational procedures. Full-featured workflow systems have been proposed to fulfil the demand for workflow management. However, such systems tend to be over-weighted for actual bioinformatics practices. We realize that quick deployment of cutting-edge software implementing advanced algorithms and data formats, and continuous adaptation to changes in computational resources and the environment are often prioritized in scientific workflow management. These features have a greater affinity with the agile software development method through iterative development phases after trial and error. Here, we show the application of a scientific workflow system Pwrake to bioinformatics workflows. Pwrake is a parallel workflow extension of Ruby's standard build tool Rake, the flexibility of which has been demonstrated in the astronomy domain. Therefore, we hypothesize that Pwrake also has advantages in actual bioinformatics workflows. Findings We implemented the Pwrake workflows to process next generation sequencing data using the Genomic Analysis Toolkit (GATK) and Dindel. GATK and Dindel workflows are typical examples of sequential and parallel workflows, respectively. We found that in practice, actual scientific workflow development iterates over two phases, the workflow definition phase and the parameter adjustment phase. We introduced separate workflow definitions to help focus on each of the two developmental phases, as well as helper methods to simplify the descriptions. This approach increased iterative development efficiency. Moreover, we implemented combined workflows to demonstrate modularity of the GATK and Dindel workflows. Conclusions Pwrake enables agile management of scientific workflows in the bioinformatics domain. The internal domain specific language design built on Ruby gives the flexibility of rakefiles for writing scientific workflows. Furthermore, readability

  4. US manufacturers of commercially available stand-alone photovoltaic lighting systems

    SciTech Connect

    McNutt, P

    1994-05-01

    This report introduces photovoltaic (PV) lighting systems, gives some specifications for ordering these systems, and provides a list of some of the manufacturers of these systems in the United States. These PV lighting systems are all commercially available. They are stand-alone systems because they are not tied to the electric utility power grid.

  5. On the Biomimetic Design of Agile-Robot Legs

    PubMed Central

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented. PMID:22247667

  6. Wavelength-Agile External-Cavity Diode Laser for DWDM

    NASA Technical Reports Server (NTRS)

    Pilgrim, Jeffrey S.; Bomse, David S.

    2006-01-01

    A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

  7. On the biomimetic design of agile-robot legs.

    PubMed

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented.

  8. Manufacture of the ALS storage ring vacuum system

    NASA Astrophysics Data System (ADS)

    Kennedy, Kurt

    1991-08-01

    The Advanced Light Source (ALS) storage ring has a 4.9 meter magnetic radius and an antechamber type vacuum chamber. These two requirements makes conventional bent tube manufacturing techniques difficult. The ALS sector vacuum chambers have been made by machining two halves out of aluminum plate and welding at the mid plane. Each of these chambers have over 50 penetrations with metal sealed flanges and seven metal sealed poppet valves which use the chamber wall as the valve seat. The sector chambers are 10 meters long and some features in the chambers must be located to .25 mm. This paper describes how and how successfully these features have been achieved.

  9. Teaching Agile Software Development: A Case Study

    ERIC Educational Resources Information Center

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  10. The RITE Approach to Agile Acquisition

    DTIC Science & Technology

    2013-04-01

    Review (SVR), and Production Readiness Review ( PRR ), which were evaluated against Agile development requirements. Further analysis was conducted...Audit (FCA), PRR , Operational Test Readiness Review (OTRR), Physical Configuration Audit (PCA), Integration Readiness Review (IRR), In Service...Technology (DSB Task Force, 2009, p. 48) In the context of the primary milestone reviews (PDR, CDR, and SVR/ PRR ), a nominal Agile development structure was

  11. The Introduction of Agility into Albania.

    ERIC Educational Resources Information Center

    Smith-Stevens, Eileen J.; Shkurti, Drita

    1998-01-01

    Describes a plan to introduce and achieve a national awareness of agility (and easy entry into the world market) for Albania through the relatively stable higher-education order. Agility's four strategic principles are enriching the customer, cooperating to enhance competitiveness, organizing to master change and uncertainty, and leveraging the…

  12. An Agile Course-Delivery Approach

    ERIC Educational Resources Information Center

    Capellan, Mirkeya

    2009-01-01

    In the world of software development, agile methodologies have gained popularity thanks to their lightweight methodologies and flexible approach. Many advocates believe that agile methodologies can provide significant benefits if applied in the educational environment as a teaching method. The need for an approach that engages and motivates…

  13. Waste reduction possibilities for manufacturing systems in the industry 4.0

    NASA Astrophysics Data System (ADS)

    Tamás, P.; Illés, B.; Dobos, P.

    2016-11-01

    The industry 4.0 creates some new possibilities for the manufacturing companies’ waste reduction for example by appearance of the cyber physical systems and the big data concept and spreading the „Internet of things (IoT)”. This paper presents in details the fourth industrial revolutions’ more important achievements and tools. In addition there will be also numerous new research directions in connection with the waste reduction possibilities of the manufacturing systems outlined.

  14. Manufacturability of Heat and Serve Ration in Institutional Pouch System Analysis

    DTIC Science & Technology

    2006-09-01

    If a four-seal tester (designed to pressurize filled pouches by use of a hypodermic needle through the pouch wall) is used, all four seals can be...COMBAT RATION NETWORK FOR TECHNOLOGY IMPLEMENTATION Manufacturability of Heat and Serve Ration in Institutional Pouch “System Analysis ...5 ,QFOXGHDUHDFRGH August 2006 Final May 2005 - September 2006 Manufacturability of Heat and Serve Ration in Institutional Pouch System Analysis

  15. Fighter agility metrics, research, and test

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.

    1990-01-01

    Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

  16. Some Findings Concerning Requirements in Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  17. Toward Agile Control of a Flexible-Spine Model for Quadruped Bounding

    DTIC Science & Technology

    2015-01-01

    step reachable states. Finally, we propose new guidelines for quantifying “agility” for legged robots , providing a preliminary framework for...quantifying and improving performance of legged systems. 1. INTRODUCTION One goal in developing legged robot systems is to provide a high degree of agility...Intuitively, being agile means that future states (i.e., position and velocity variables defining snapshots of the dynamic robot as it moves) are not

  18. Owning the Technical Baseline - a Key Enabler: Agility as the Counterweight to Uncertainty and Change

    DTIC Science & Technology

    2015-08-01

    future. This fundamentally means we must embrace adaptability as a basic precept for how we develop, procure and sustain our weapons systems to be...effective for the warfighter over their life cycles. The underlying metric for such agility and adaptability is speed. When we can develop and field...capabilities fast, we must do so. Furthermore, agility and adaptability can be enabled by designing systems with modularity, well-designed standards and

  19. Research on application information system integration platform in medicine manufacturing enterprise.

    PubMed

    Deng, Wu; Zhao, Huimin; Zou, Li; Li, Yuanyuan; Li, Zhengguang

    2012-08-01

    Computer and information technology popularizes in the medicine manufacturing enterprise for its potentials in working efficiency and service quality. In allusion to the explosive data and information of application system in current medicine manufacturing enterprise, we desire to propose a novel application information system integration platform in medicine manufacturing enterprise, which based on a combination of RFID technology and SOA, to implement information sharing and alternation. This method exploits the application integration platform across service interface layer to invoke the RFID middleware. The loose coupling in integration solution is realized by Web services. The key techniques in RFID event components and expanded role-based security access mechanism are studied in detail. Finally, a case study is implemented and tested to evidence our understanding on application system integration platform in medicine manufacturing enterprise.

  20. Structures of systems 1. Cohomology of manufacturing and supply network-like systems

    NASA Astrophysics Data System (ADS)

    Macfarlane, Andrew

    2014-07-01

    Understanding the relation between large-scale and small-scale functionality is an acute problem in large systems. This paper presents possible structures that capture those relations. Here "structure" means a functor on a category, in this case the category of "combinatorial systems" that model manufacturing systems and supply networks. The details of the dynamics of these systems are frequently the domain of specialists and are ill understood outside such areas. Clustering activities in subsystems introduces covers as scales of analysis. This allows the development of sheaves of schedules and their properties which are analyzed by an adaptation of Čech cohomology. These are applied in supply networks to characterize the fragmentation of these networks and to characterize the conditions for local changes in schedules to extend to the whole system. The intent of this paper is to see sheaves and their cohomology as analytical probes that can enhance our understanding of large-scale systems.

  1. Prediction-based manufacturing center self-adaptive demand side energy optimization in cyber physical systems

    NASA Astrophysics Data System (ADS)

    Sun, Xinyao; Wang, Xue; Wu, Jiangwei; Liu, Youda

    2014-05-01

    Cyber physical systems(CPS) recently emerge as a new technology which can provide promising approaches to demand side management(DSM), an important capability in industrial power systems. Meanwhile, the manufacturing center is a typical industrial power subsystem with dozens of high energy consumption devices which have complex physical dynamics. DSM, integrated with CPS, is an effective methodology for solving energy optimization problems in manufacturing center. This paper presents a prediction-based manufacturing center self-adaptive energy optimization method for demand side management in cyber physical systems. To gain prior knowledge of DSM operating results, a sparse Bayesian learning based componential forecasting method is introduced to predict 24-hour electric load levels for specific industrial areas in China. From this data, a pricing strategy is designed based on short-term load forecasting results. To minimize total energy costs while guaranteeing manufacturing center service quality, an adaptive demand side energy optimization algorithm is presented. The proposed scheme is tested in a machining center energy optimization experiment. An AMI sensing system is then used to measure the demand side energy consumption of the manufacturing center. Based on the data collected from the sensing system, the load prediction-based energy optimization scheme is implemented. By employing both the PSO and the CPSO method, the problem of DSM in the manufacturing center is solved. The results of the experiment show the self-adaptive CPSO energy optimization method enhances optimization by 5% compared with the traditional PSO optimization method.

  2. Knowledge-based systems: how will they affect manufacturing in the 80's

    SciTech Connect

    King, M.S.; Brooks, S.L.; Schaefer, R.M.

    1985-04-01

    Knowledge-based or ''expert'' systems have been in various stages of development and use for a long time in the academic world. Some of these systems have come out of the lab in recent years in the fields of medicine, geology, and computer system design. The use of knowledge-based systems in conjunction iwth manufacturing process planning and the emerging CAD/CAM/CAE technologies promises significant increases in engineering productivity. This paper's focus is on areas in manufacturing where knowledge-based systems could most benefit the engineer and industry. 13 refs., 3 figs.

  3. 40 CFR 63.149 - Control requirements for certain liquid streams in open systems within a chemical manufacturing...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... streams in open systems within a chemical manufacturing process unit. 63.149 Section 63.149 Protection of... Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry for Process Vents, Storage... open systems within a chemical manufacturing process unit. (a) The owner or operator shall comply...

  4. Compressed Air System Optimization Saves Energy and Improves Production at a Textile Manufacturing Mill (Peerless Division, Thomastown Mills, Inc.)

    SciTech Connect

    2001-06-01

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the textile manufacturing mill project.

  5. Evaluation of Additively Manufactured Metals for Use in Oxygen Systems Project

    NASA Technical Reports Server (NTRS)

    Tylka, Jonathan; Cooper, Ken; Peralta, Stephen; Wilcutt, Terrence; Hughitt, Brian; Generazio, Edward

    2016-01-01

    Space Launch System, Commercial Resupply, and Commercial Crew programs have published intent to use additively manufactured (AM) components in propulsion systems and are likely to include various life support systems in the future. Parts produced by these types of additive manufacturing techniques have not been fully evaluated for use in oxygen systems and the inherent risks have not been fully identified. Some areas of primary concern in the SLS process with respect to oxygen compatibility may be the porosity of the printed parts, fundamental differences in microstructure of an AM part as compared to traditional materials, or increased risk of shed metal particulate into an oxygen system. If an ignition were to occur the printed material could be more flammable than components manufactured from a traditional billet of raw material and/or present a significant hazards if not identified and rigorously studied in advance of implementation into an oxygen system.

  6. Extraterrestrial processing and manufacturing of large space systems. Volume 3: Executive summary

    NASA Technical Reports Server (NTRS)

    Miller, R. H.; Smith, D. B. S.

    1979-01-01

    Facilities and equipment are defined for refining processes to commercial grade of lunar material that is delivered to a 'space manufacturing facility' in beneficiated, primary processed quality. The manufacturing facilities and the equipment for producing elements of large space systems from these materials and providing programmatic assessments of the concepts are also defined. In-space production processes of solar cells (by vapor deposition) and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, converters, and others are described.

  7. 75 FR 56471 - Revisions to the Requirements for Authority To Manufacture and Distribute Postage Evidencing Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ... manufacture and distribute postage evidencing systems. This revision clarifies the internal controls required... opinion on the design and operating effectiveness of the RC's internal controls related to the CMRS system... operating effectiveness of the internal controls related to the PC Postage system and any other......

  8. ANALYSIS OF SEQUENTIAL FAILURES FOR ASSESSMENT OF RELIABILITY AND SAFETY OF MANUFACTURING SYSTEMS. (R828541)

    EPA Science Inventory

    Assessment of reliability and safety of a manufacturing system with sequential failures is an important issue in industry, since the reliability and safety of the system depend not only on all failed states of system components, but also on the sequence of occurrences of those...

  9. 76 FR 67018 - Notice to Manufacturers of Airport In-Pavement Stationary Runway Weather Information Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-28

    ... Information Systems AGENCY: Federal Aviation Administration (FAA), U.S. DOT. ACTION: Notice to Manufacturers of In-Pavement Stationary Runway Weather Information Systems. SUMMARY: Projects funded under the... Active or Passive In- Pavement Stationary Runway Weather Information Systems that meet the...

  10. Adopting best practices: "Agility" moves from software development to healthcare project management.

    PubMed

    Kitzmiller, Rebecca; Hunt, Eleanor; Sproat, Sara Breckenridge

    2006-01-01

    It is time for a change in mindset in how nurses operationalize system implementations and manage projects. Computers and systems have evolved over time from unwieldy mysterious machines of the past to ubiquitous computer use in every aspect of daily lives and work sites. Yet, disconcertingly, the process used to implement these systems has not evolved. Technology implementation does not need to be a struggle. It is time to adapt traditional plan-driven implementation methods to incorporate agile techniques. Agility is a concept borrowed from software development and is presented here because it encourages flexibility, adaptation, and continuous learning as part of the implementation process. Agility values communication and harnesses change to an advantage, which facilitates the natural evolution of an adaptable implementation process. Specific examples of agility in an implementation are described, and plan-driven implementation stages are adapted to incorporate relevant agile techniques. This comparison demonstrates how an agile approach enhances traditional implementation techniques to meet the demands of today's complex healthcare environments.

  11. Improvements in state-of-the-art uncooled microbolometer system performance based on volume manufacturing experience

    NASA Astrophysics Data System (ADS)

    Backer, Brian S.; Breen, Thomas E.; Hartle, Nancy; Kohin, Margaret; Murphy, Robert

    2003-09-01

    Starting in the early 1990"s, BAE SYSTEMS began a significant investment in the development of MicroIR Uncooled Microbolometers. 160 x 120, 320 x 240, and 640 x 480 focal plane array (FPA) technology advances in both large pixel and small pixel format have driven Noise Equivalent Temperature Difference (NETD), power, size, weight, and price lower. These improvements have resulted in many new applications that previously could not afford larger, heavier, costlier cooled systems. While advancements in state of the art performance have been published regularly at Aerosense and other industry forums, far less has been discussed on the performance advances that have occurred as a result of volume manufacturing. This paper describes the improvements in performance that have been a result of BAE SYSTEMS leadership position in MicroIR microbolometer manufacturing. With over 15,000 units shipped through 2002, ranging from Standard Imaging Modules (SIM) to Standard Camera Cores (SCC) to complete imaging systems, the cumulative expertise gathered from this manufacturing experience over the past seven years has also pushed the state of the art system performance, in ways that single/small quantity technology demonstrators never could. Comparisons of temporal NETD, spatial NETD, dynamic range, operability, throughput, capacity, and other key metrics from early manufacturing lots to the present will be presented to demonstrate the advances that can only be achieved through volume manufacturing.

  12. Agile Leaders, Agile Institutions: Educating Adaptive and Innovative Leaders for Today and Tomorrow

    DTIC Science & Technology

    2005-03-18

    to organizational learning , specifically for militaries at war. With these lenses and informed by observations from the CCCs, the paper advances...rapid, effective organizational learning is the essence of organizational agility. In line with this paper’s concept of individual agility...organizational agility is a metaphor for organizational learning that is faster, more flexible, and more sensitive to the speed with which individual experiential

  13. In Pursuit of Agile Acquisition: Are We There Yet?

    DTIC Science & Technology

    2013-03-01

    bureaucracy in the methodology, and avoid promoting activities that would further expand regulatory guidance and oversight to improve agility. Once an...through an integrated digital system called Blue Force Tracker . Instead of the lack of situational awareness, units now use streaming video to help...to trace forensics collected at other crime scenes or events and trace the data back to specific individuals thus identifying dangerous insurgents

  14. Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

    SciTech Connect

    Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

    2011-05-04

    The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current 'metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of

  15. Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

    NASA Astrophysics Data System (ADS)

    Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

    2011-05-01

    The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current `metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of

  16. Perception of the HACCP system operators on livestock product manufacturers.

    PubMed

    Kim, Jung-Hyun; Nam, Ki-Chang; Jo, Cheorun; Lim, Dong-Gyun

    2014-01-01

    The purpose of this study was to investigate crucial factors on HACCP system implementation in domestic livestock product plants, and to offer job satisfaction and the career prospect of HACCP system operators. The survey was carried out by selecting 150 HACCP system operators who implemented HACCP system. The respondents claimed that the most important contents in HACCP system operation were to assemble HACCP team (21.8%), and the second was to monitoring (20.0%). Documentation and recording (16.9%) and verification (11.1%) were followed. The respondents answered the major factor in sanitation management was cleaning/washing/disinfection (18.9%) and inspection (18.4%). The results showed that there were significant differences in the prospect of occupation in HACCP system operator by the gender (p < 0.015), age, livestock product facilities, service period, and position (p < 0.001). The respondents from HACCP system operator were satisfied with their job (73%) and also showed optimistic prospect of occupation (82%).

  17. Dropwise Additive Manufacturing of Pharmaceutical Products for Amorphous and Self Emulsifying Drug Delivery Systems.

    PubMed

    Içten, Elçin; Purohit, Hitesh S; Wallace, Chelsey; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

    2017-04-02

    The improvements in healthcare systems and the advent of the precision medicine initiative have created the need to develop more innovative manufacturing methods for the delivery and production of individualized dosing and personalized treatments. In accordance with the changes observed in healthcare systems towards more innovative therapies, this paper presents dropwise additive manufacturing of pharmaceutical products (DAMPP) for small scale, distributed manufacturing of individualized dosing as an alternative to conventional manufacturing methods A dropwise additive manufacturing process for amorphous and self-emulsifying drug delivery systems is reported, which utilizes drop-on-demand printing technology for automated and controlled deposition of melt-based formulations onto inert tablets. The advantages of drop on demand technology include reproducible production of droplets with adjustable sizing and high placement accuracy, which enable production of individualized dosing even for low dose and high potency drugs. Flexible use of different formulations, such as lipid-based formulations, allows enhancement of the solubility of poorly water soluble and highly lipophilic drugs with DAMPP. Here, DAMPP is used to produce solid oral dosage forms from melts of an active pharmaceutical ingredient and a surfactant. The dosage forms are analyzed to show the amorphous nature, self-emulsifying drug delivery system characteristics and dissolution behavior of these formulations.

  18. A survey of manufacturers of solar thermal energy systems

    NASA Technical Reports Server (NTRS)

    Levine, N.; Slonski, M. L.

    1982-01-01

    Sixty-seven firms that had received funding for development of solar thermal energy systems (STES) were surveyed. The effect of the solar thermal technology systems program in accelerating (STES) were assessed. The 54 firms still developing STES were grouped into a production typology comparing the three major technologies with three basic functions. It was discovered that large and small firms were developing primarily central receiver systems, but also typically worked on more than one technology. Most medium-sized firms worked only on distributed systems. Federal support of STES was perceived as necessary to allow producers to take otherwise unacceptable risks. Approximately half of the respondents would drop out of STES if support were terminated, including a disproportionate number of medium-sized firms. A differentiated view of the technology, taking into account differing firm sizes and the various stages of technology development, was suggested for policy and planning purposes.

  19. SAR imagery using chaotic carrier frequency agility pulses

    NASA Astrophysics Data System (ADS)

    Xu, Xiaojian; Feng, Xiangzhi

    2011-06-01

    Synthetic aperture radar (SAR) systems are getting more and more applications in both civilian and military remote sensing missions. With the increasing deployment of electronic countermeasures (ECM) on modern battlefields, SAR encounters more and more interference jamming signals. The ECM jamming signals cause the SAR system to receive and process erroneous information which results in severe degradations in the output SAR images and/or formation of phony images of nonexistent targets. As a consequence, development of the electronic counter-countermeasures (ECCM) capability becomes one of the key problems in SAR system design. This paper develops radar signaling strategies and algorithms that enhance the ability of synthetic aperture radar to image targets under conditions of electronic jamming. The concept of SAR using chaotic carrier frequency agility pulses (CCFAP-SAR) is first proposed. Then the imaging procedure for CCFAP-SAR is discussed in detail. The ECCM performance of CCFAP-SAR for both depressive noise jamming and deceptive repeat jamming is analyzed. The impact of the carrier frequency agility range on the image quality of CCFAP-SAR is also studied. Simulation results demonstrate that, with adequate agility range of the carrier frequency, the proposed CCFAP-SAR performs as well as conventional radar with linear frequency modulation (LFM) waveform in image quality and slightly better in anti-noise depressive jamming; while performs very well in anti-deception jamming which cannot be rejected by LFM-SAR.

  20. 21 CFR 821.25 - Device tracking system and content requirements: manufacturer requirements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES MEDICAL DEVICE TRACKING REQUIREMENTS Tracking Requirements § 821.25 Device tracking system and content requirements: manufacturer requirements. (a) A... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Device tracking system and content...

  1. 77 FR 47110 - Manufacturer of Controlled Substances; Notice of Application; R & D Systems, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-07

    ... Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; R & D Systems, Inc... Systems, Inc., 614 McKinley Place NE., Minneapolis, Minnesota 55413, made application to the Drug... dosage form to distribute to researchers. In reference to drug codes 7360 and 7370, the company plans...

  2. A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing Part I: System Analysis, Component Identification, Additive Manufacturing, and Testing of Polymer Composites

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Haller, William J.; Poinsatte, Philip E.; Halbig, Michael C.; Schnulo, Sydney L.; Singh, Mrityunjay; Weir, Don; Wali, Natalie; Vinup, Michael; Jones, Michael G.; Patterson, Clark; Santelle, Tom; Mehl, Jeremy

    2015-01-01

    The research and development activities reported in this publication were carried out under NASA Aeronautics Research Institute (NARI) funded project entitled "A Fully Nonmetallic Gas Turbine Engine Enabled by Additive Manufacturing." The objective of the project was to conduct evaluation of emerging materials and manufacturing technologies that will enable fully nonmetallic gas turbine engines. The results of the activities are described in three part report. The first part of the report contains the data and analysis of engine system trade studies, which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. The technical scope of activities included an assessment of the feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composites, which were accomplished by fabricating prototype engine components and testing them in simulated engine operating conditions. The manufacturing process parameters were developed and optimized for polymer and ceramic composites (described in detail in the second and third part of the report). A number of prototype components (inlet guide vane (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included turbine nozzle components. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

  3. PLAT: An Automated Fault and Behavioural Anomaly Detection Tool for PLC Controlled Manufacturing Systems

    PubMed Central

    Ghosh, Arup; Qin, Shiming; Lee, Jooyeoun

    2016-01-01

    Operational faults and behavioural anomalies associated with PLC control processes take place often in a manufacturing system. Real time identification of these operational faults and behavioural anomalies is necessary in the manufacturing industry. In this paper, we present an automated tool, called PLC Log-Data Analysis Tool (PLAT) that can detect them by using log-data records of the PLC signals. PLAT automatically creates a nominal model of the PLC control process and employs a novel hash table based indexing and searching scheme to satisfy those purposes. Our experiments show that PLAT is significantly fast, provides real time identification of operational faults and behavioural anomalies, and can execute within a small memory footprint. In addition, PLAT can easily handle a large manufacturing system with a reasonable computing configuration and can be installed in parallel to the data logging system to identify operational faults and behavioural anomalies effectively. PMID:27974882

  4. A PetriNet-Based Approach for Supporting Traceability in Cyber-Physical Manufacturing Systems.

    PubMed

    Huang, Jiwei; Zhu, Yeping; Cheng, Bo; Lin, Chuang; Chen, Junliang

    2016-03-17

    With the growing popularity of complex dynamic activities in manufacturing processes, traceability of the entire life of every product has drawn significant attention especially for food, clinical materials, and similar items. This paper studies the traceability issue in cyber-physical manufacturing systems from a theoretical viewpoint. Petri net models are generalized for formulating dynamic manufacturing processes, based on which a detailed approach for enabling traceability analysis is presented. Models as well as algorithms are carefully designed, which can trace back the lifecycle of a possibly contaminated item. A practical prototype system for supporting traceability is designed, and a real-life case study of a quality control system for bee products is presented to validate the effectiveness of the approach.

  5. A PetriNet-Based Approach for Supporting Traceability in Cyber-Physical Manufacturing Systems

    PubMed Central

    Huang, Jiwei; Zhu, Yeping; Cheng, Bo; Lin, Chuang; Chen, Junliang

    2016-01-01

    With the growing popularity of complex dynamic activities in manufacturing processes, traceability of the entire life of every product has drawn significant attention especially for food, clinical materials, and similar items. This paper studies the traceability issue in cyber-physical manufacturing systems from a theoretical viewpoint. Petri net models are generalized for formulating dynamic manufacturing processes, based on which a detailed approach for enabling traceability analysis is presented. Models as well as algorithms are carefully designed, which can trace back the lifecycle of a possibly contaminated item. A practical prototype system for supporting traceability is designed, and a real-life case study of a quality control system for bee products is presented to validate the effectiveness of the approach. PMID:26999141

  6. Optimized design of PSA nitrogen-manufacturing system based on PLC

    NASA Astrophysics Data System (ADS)

    Nie, Zongyao; Ma, Xiushui; Jiang, Jun

    2010-12-01

    Firstly introducing principle and technological process of PSA nitrogen-manufacturing system, on condition of its high air consumption and weak in nitrogen-manufacturing system at present. We repeatedly studied the controlled object in this process, analyzed the PLC procedure based on the program rule of PLC of Siemens S7-200 series, then re-program PLC procedure without altering the nitrogen production technique of PSA nitrogen-manufacturing system. At the same time, in order to improve the operation efficiency of the response of action, we also did experiment and demonstration in the consistency of the I/O port and peripheral equipment. In this paper, through optimization of hardware and software design, the nitrogen producing cost was calculated at RMB 0.35 per m3, declined by 12% from the original RMB 0.4 per m3.

  7. Optimized design of PSA nitrogen-manufacturing system based on PLC

    NASA Astrophysics Data System (ADS)

    Nie, Zongyao; Ma, Xiushui; Jiang, Jun

    2011-05-01

    Firstly introducing principle and technological process of PSA nitrogen-manufacturing system, on condition of its high air consumption and weak in nitrogen-manufacturing system at present. We repeatedly studied the controlled object in this process, analyzed the PLC procedure based on the program rule of PLC of Siemens S7-200 series, then re-program PLC procedure without altering the nitrogen production technique of PSA nitrogen-manufacturing system. At the same time, in order to improve the operation efficiency of the response of action, we also did experiment and demonstration in the consistency of the I/O port and peripheral equipment. In this paper, through optimization of hardware and software design, the nitrogen producing cost was calculated at RMB 0.35 per m3, declined by 12% from the original RMB 0.4 per m3.

  8. PLAT: An Automated Fault and Behavioural Anomaly Detection Tool for PLC Controlled Manufacturing Systems.

    PubMed

    Ghosh, Arup; Qin, Shiming; Lee, Jooyeoun; Wang, Gi-Nam

    2016-01-01

    Operational faults and behavioural anomalies associated with PLC control processes take place often in a manufacturing system. Real time identification of these operational faults and behavioural anomalies is necessary in the manufacturing industry. In this paper, we present an automated tool, called PLC Log-Data Analysis Tool (PLAT) that can detect them by using log-data records of the PLC signals. PLAT automatically creates a nominal model of the PLC control process and employs a novel hash table based indexing and searching scheme to satisfy those purposes. Our experiments show that PLAT is significantly fast, provides real time identification of operational faults and behavioural anomalies, and can execute within a small memory footprint. In addition, PLAT can easily handle a large manufacturing system with a reasonable computing configuration and can be installed in parallel to the data logging system to identify operational faults and behavioural anomalies effectively.

  9. Using CORBA to integrate manufacturing cells to a virtual enterprise

    NASA Astrophysics Data System (ADS)

    Pancerella, Carmen M.; Whiteside, Robert A.

    1997-01-01

    It is critical in today's enterprises that manufacturing facilities are not isolated from design, planning, and other business activities and that information flows easily and bidirectionally between these activities. It is also important and cost-effective that COTS software, databases, and corporate legacy codes are well integrated in the information architecture. Further, much of the information generated during manufacturing must be dynamically accessible to engineering and business operations both in a restricted corporate intranet and on the internet. The software integration strategy in the Sandia Agile Manufacturing Testbed supports these enterprise requirements. We are developing a CORBA-based distributed object software system for manufacturing. Each physical machining device is a CORBA object and exports a common IDL interface to allow for rapid and dynamic insertion, deletion, and upgrading within the manufacturing cell. Cell management CORBA components access manufacturing devices without knowledge of any device-specific implementation. To support information flow from design to planning data is accessible to machinists on the shop floor. CORBA allows manufacturing components to be easily accessible to the enterprise. Dynamic clients can be created using web browsers and portable Java GUI's. A CORBA-OLE adapter allows integration to PC desktop applications. Other commercial software can access CORBA network objects in the information architecture through vendor API's.

  10. Note: a multifunctional electrospinning system for manufacturing diversified nanofibrous structures.

    PubMed

    Ru, Changhai; Wang, Feilong; Ge, Cuicui; Luo, Jun

    2013-08-01

    A multifunctional electrospinning system has been developed to fabricate diversified nanofibrous structures. It consists of a high voltage power supply, a syringe pump, and a cage like collector that are dominated via the controller by setting parameters from a touch screen. As the key component, speed, and diameter of the collector can be adjusted automatically according to predetermined requirement, which enhances the flexibility of the system. Well-aligned nanofiber array, nanofibrous membrane, and 3D nanofibrous structure were obtained successfully through the technique. This work should be of help to construct functional nanofibrous materials for promoting the development of electrospinning.

  11. Note: A multifunctional electrospinning system for manufacturing diversified nanofibrous structures

    NASA Astrophysics Data System (ADS)

    Ru, Changhai; Wang, Feilong; Ge, Cuicui; Luo, Jun

    2013-08-01

    A multifunctional electrospinning system has been developed to fabricate diversified nanofibrous structures. It consists of a high voltage power supply, a syringe pump, and a cage like collector that are dominated via the controller by setting parameters from a touch screen. As the key component, speed, and diameter of the collector can be adjusted automatically according to predetermined requirement, which enhances the flexibility of the system. Well-aligned nanofiber array, nanofibrous membrane, and 3D nanofibrous structure were obtained successfully through the technique. This work should be of help to construct functional nanofibrous materials for promoting the development of electrospinning.

  12. CATIA - A computer aided design and manufacturing tridimensional system

    NASA Astrophysics Data System (ADS)

    Bernard, F.

    A properietary computer graphics-aided, three-dimensional interactive application (CATIA) design system is described. CATIA employs approximately 100 graphics displays, which are used by some 500 persons engaged in the definition of aircraft structures, structural strength analyses, the kinematic analysis of mobile elements, aerodynamic calculations, the choice of tooling in the machining of aircraft elements, and the programming of robotics. CATIA covers these diverse fields with a single data base. After a description of salient aspects of the system's hardware and software, graphics examples are given of the definition of curves, surfaces, complex volumes, and analytical tasks.

  13. SuperAGILE Services at ASDC

    SciTech Connect

    Preger, B.; Verrecchia, F.; Pittori, C.; Antonelli, L. A.; Giommi, P.; Lazzarotto, F.; Evangelista, Y.

    2008-05-22

    The Italian Space Agency Science Data Center (ASDC) is a facility with several responsibilities including support to all the ASI scientific missions as for management and archival of the data, acting as the interface between ASI and the scientific community and providing on-line access to the data hosted. In this poster we describe the services that ASDC provides for SuperAGILE, in particular the ASDC public web pages devoted to the dissemination of SuperAGILE scientific results. SuperAGILE is the X-Ray imager onboard the AGILE mission, and provides the scientific community with orbit-by-orbit information on the observed sources. Crucial source information including position and flux in chosen energy bands will be reported in the SuperAGILE public web page at ASDC. Given their particular interest, another web page will be dedicated entirely to GRBs and other transients, where new event alerts will be notified and where users will find all the available informations on the GRBs detected by SuperAGILE.

  14. Real time intelligent process control system for thin film solar cell manufacturing

    SciTech Connect

    George Atanasoff

    2010-10-29

    This project addresses the problem of lower solar conversion efficiency and waste in the typical solar cell manufacturing process. The work from the proposed development will lead toward developing a system which should be able to increase solar panel conversion efficiency by an additional 12-15% resulting in lower cost panels, increased solar technology adoption, reduced carbon emissions and reduced dependency on foreign oil. All solar cell manufacturing processes today suffer from manufacturing inefficiencies that currently lead to lower product quality and lower conversion efficiency, increased product cost and greater material and energy consumption. This results in slower solar energy adoption and extends the time solar cells will reach grid parity with traditional energy sources. The thin film solar panel manufacturers struggle on a daily basis with the problem of thin film thickness non-uniformity and other parameters variances over the deposited substrates, which significantly degrade their manufacturing yield and quality. Optical monitoring of the thin films during the process of the film deposition is widely perceived as a necessary step towards resolving the non-uniformity and non-homogeneity problem. In order to enable the development of an optical control system for solar cell manufacturing, a new type of low cost optical sensor is needed, able to acquire local information about the panel under deposition and measure its local characteristics, including the light scattering in very close proximity to the surface of the film. This information cannot be obtained by monitoring from outside the deposition chamber (as traditional monitoring systems do) due to the significant signal attenuation and loss of its scattering component before the reflected beam reaches the detector. In addition, it would be too costly to install traditional external in-situ monitoring systems to perform any real-time monitoring over large solar panels, since it would require

  15. Sustainable Precision Green Manufacturing Technologies for Indirect Fire Systems

    DTIC Science & Technology

    2014-03-31

    100 48 Prototype Laser Ignition System equipment 100 49 M119A2 Digital Fire Control equipment Phase 4 Spanning Yoke 100 50 Digital Fire Control...109.3 ADIM Weapon Parts- -3-Shaft 100 109.4 ADIM Weapon Parts- -4-Alpine Bearings 100 109.5 ADIM Weapon Parts- 5-Ledex Solenoids 100 109.6 ADIM Weapon

  16. Method for Determining the Weight of Functional Objectives on Manufacturing System

    PubMed Central

    Zhang, Qingshan; Xu, Wei; Zhang, Jiekun

    2014-01-01

    We propose a three-dimensional integrated weight determination to solve manufacturing system functional objectives, where consumers are weighted by triangular fuzzy numbers to determine the enterprises. The weights, subjective parts are determined by the expert scoring method, the objective parts are determined by the entropy method with the competitive advantage of determining. Based on the integration of three methods and comprehensive weight, we provide some suggestions for the manufacturing system. This paper provides the numerical example analysis to illustrate the feasibility of this method. PMID:25243203

  17. Method for determining the weight of functional objectives on manufacturing system.

    PubMed

    Zhang, Qingshan; Xu, Wei; Zhang, Jiekun

    2014-01-01

    We propose a three-dimensional integrated weight determination to solve manufacturing system functional objectives, where consumers are weighted by triangular fuzzy numbers to determine the enterprises. The weights, subjective parts are determined by the expert scoring method, the objective parts are determined by the entropy method with the competitive advantage of determining. Based on the integration of three methods and comprehensive weight, we provide some suggestions for the manufacturing system. This paper provides the numerical example analysis to illustrate the feasibility of this method.

  18. Balancing Plan-Driven and Agile Methods in Software Engineering Project Courses

    NASA Astrophysics Data System (ADS)

    Boehm, Barry; Port, Dan; Winsor Brown, A.

    2002-09-01

    For the past 6 years, we have been teaching a two-semester software engineering project course. The students organize into 5-person teams and develop largely web-based electronic services projects for real USC campus clients. We have been using and evolving a method called Model- Based (System) Architecting and Software Engineering (MBASE) for use in both the course and in industrial applications. The MBASE Guidelines include a lot of documents. We teach risk-driven documentation: if it is risky to document something, and not risky to leave it out (e.g., GUI screen placements), leave it out. Even so, students tend to associate more documentation with higher grades, although our grading eventually discourages this. We are always on the lookout for ways to have students learn best practices without having to produce excessive documentation. Thus, we were very interested in analyzing the various emerging agile methods. We found that agile methods and milestone plan-driven methods are part of a “how much planning is enough?” spectrum. Both agile and plan-driven methods have home grounds of project characteristics where they clearly work best, and where the other will have difficulties. Hybrid agile/plan-driven approaches are feasible, and necessary for projects having a mix of agile and plan-driven home ground characteristics. Information technology trends are going more toward the agile methods' home ground characteristics of emergent requirements and rapid change, although there is a concurrent increase in concern with dependability. As a result, we are currently experimenting with risk-driven combinations of MBASE and agile methods, such as integrating requirements, test plans, peer reviews, and pair programming into “agile quality management.”

  19. Approaches to Quality Risk Management When Using Single-Use Systems in the Manufacture of Biologics.

    PubMed

    Ishii-Watabe, Akiko; Hirose, Akihiko; Katori, Noriko; Hashii, Norikata; Arai, Susumu; Awatsu, Hirotoshi; Eiza, Akira; Hara, Yoshiaki; Hattori, Hideshi; Inoue, Tomomi; Isono, Tetsuya; Iwakura, Masahiro; Kajihara, Daisuke; Kasahara, Nobuo; Matsuda, Hiroyuki; Murakami, Sei; Nakagawa, Taishiro; Okumura, Takehiro; Omasa, Takeshi; Takuma, Shinya; Terashima, Iyo; Tsukahara, Masayoshi; Tsutsui, Maiko; Yano, Takahiro; Kawasaki, Nana

    2015-10-01

    Biologics manufacturing technology has made great progress in the last decade. One of the most promising new technologies is the single-use system, which has improved the efficiency of biologics manufacturing processes. To ensure safety of biologics when employing such single-use systems in the manufacturing process, various issues need to be considered including possible extractables/leachables and particles arising from the components used in single-use systems. Japanese pharmaceutical manufacturers, together with single-use suppliers, members of the academia and regulatory authorities have discussed the risks of using single-use systems and established control strategies for the quality assurance of biologics. In this study, we describe approaches for quality risk management when employing single-use systems in the manufacturing of biologics. We consider the potential impact of impurities related to single-use components on drug safety and the potential impact of the single-use system on other critical quality attributes as well as the stable supply of biologics. We also suggest a risk-mitigating strategy combining multiple control methods which includes the selection of appropriate single-use components, their inspections upon receipt and before releasing for use and qualification of single-use systems. Communication between suppliers of single-use systems and the users, as well as change controls in the facilities both of suppliers and users, are also important in risk-mitigating strategies. Implementing these control strategies can mitigate the risks attributed to the use of single-use systems. This study will be useful in promoting the development of biologics as well as in ensuring their safety, quality and stable supply.

  20. On-line scheduling of Automatics and flexible Manufacturing System using SARSA technique

    NASA Astrophysics Data System (ADS)

    Aissani, N.; Beldjilali, B.

    2008-06-01

    In this paper context, we will show what will be the best organization of decision entities in flexible manufacturing system, but also show our approach steps to achieve a manufacturing control system which is more reliable insofar as it has responding to queries in online. With this intention, we use a multi-agent system of which the decisions taken by the system are the result of those agents group work, these agents ensure in the same time manufacturing scheduling solution and a continuously improvement of their quality thanks to the reinforcement learning technique and particularly SARSA algorithm which was introduced to them. This technique of learning makes it possible the agents to be adaptive and to learn the best behavior in their various roles (answer the requests, self-organization, plan…) without attenuating the system on-line. A computer implementation and experimentation of this model are provided in this paper to demonstrate the contribution of our approach compared to a famous metaheuristic: tabu search, widely used for scheduling in complex manufacturing systems.

  1. Distributed agile software development for the SKA

    NASA Astrophysics Data System (ADS)

    Wicenec, Andreas; Parsons, Rebecca; Kitaeff, Slava; Vinsen, Kevin; Wu, Chen; Nelson, Paul; Reed, David

    2012-09-01

    The SKA software will most probably be developed by many groups distributed across the globe and coming from dierent backgrounds, like industries and research institutions. The SKA software subsystems will have to cover a very wide range of dierent areas, but still they have to react and work together like a single system to achieve the scientic goals and satisfy the challenging data ow requirements. Designing and developing such a system in a distributed fashion requires proper tools and the setup of an environment to allow for ecient detection and tracking of interface and integration issues in particular in a timely way. Agile development can provide much faster feedback mechanisms and also much tighter collaboration between the customer (scientist) and the developer. Continuous integration and continuous deployment on the other hand can provide much faster feedback of integration issues from the system level to the subsystem developers. This paper describes the results obtained from trialing a potential SKA development environment based on existing science software development processes like ALMA, the expected distribution of the groups potentially involved in the SKA development and experience gained in the development of large scale commercial software projects.

  2. FastCam optomechanical system design and manufacture

    NASA Astrophysics Data System (ADS)

    Murga, Gaizka; Sanquirce, Rubén; Campo, Ramón; Oscoz, Alex; López, Roberto; Rebolo, Rafael

    2010-07-01

    FastCam is an instrument jointly developed by the Instituto de Astrofísica de Canarias (IAC) and the Universidad Politécnica de Cartagena (UPCT), designed to obtain high spatial resolution images in the optical wavelength range from ground-based telescopes (http://www.iac.es/proyecto/fastcam and http://www.iac.es/telescopes/Manuales/manualfastcam.pdf). The instrument is equipped with a very low noise and very fast readout speed EMCCD camera which provides short exposure images to an FPGA-based processor which performs the selection, recenterg and combination of images in real-time (applying Lucky Imaging techniques) to provide diffraction limited resolution images in 1-4 m class telescopes from 500 to 1100 nm. IDOM has contributed to this new state-of-the-art instrument with the design of an optomechanical system conceived to maximize the image scale stability of the system for astrometry. The combination of aluminum plates, carbon fiber (CFRP) rods and stainless steel mounts in the optical bench defines an athermalized and stiff design to meet the requirements of thermal and mechanical stability. This work has been done with the support of the Aerospace Subprogramme of the Spanish Centre for the Development of Industrial Technology (CDTI) and the INTEK programme of the Basque Development Agency (SPRI).

  3. MAPPER: progress toward a high-volume manufacturing system

    NASA Astrophysics Data System (ADS)

    de Boer, G.; Dansberg, M. P.; Jager, R.; Peijster, J. J. M.; Slot, E.; Steenbrink, S. W. H. K.; Wieland, M. J.

    2013-03-01

    MAPPER Lithography is developing a maskless lithography technology based on massively-parallel electron-beam writing with high speed optical data transport for switching the electron beams. In this way optical columns can be made with a throughput of 10 wafers per hour. By clustering several of these systems together high throughputs can be realized in a small footprint. This enables a highly cost-competitive solution for either direct patterning or complementary patterning approach, [1, 2]. For a 10 wph throughput per unit MAPPER will use 13,260 parallel electron beams, delivering 170 μA to the wafer. To realize this large current at the wafer MAPPER uses its patterned beam approach where each beam consists of 49 subbeams [3]. MAPPER is currently realizing its MATRIX platform. This system is one unit in the cluster depicted above and will have a capability of 10 wph (containing the patterned beams approach) and have full overlay capability. One 10 wph unit will have a footprint of 1.1 m x 1.65m. This paper will provide an overview of the development status of this MATRIX platform.

  4. Data driven CAN node reliability assessment for manufacturing system

    NASA Astrophysics Data System (ADS)

    Zhang, Leiming; Yuan, Yong; Lei, Yong

    2017-01-01

    The reliability of the Controller Area Network(CAN) is critical to the performance and safety of the system. However, direct bus-off time assessment tools are lacking in practice due to inaccessibility of the node information and the complexity of the node interactions upon errors. In order to measure the mean time to bus-off(MTTB) of all the nodes, a novel data driven node bus-off time assessment method for CAN network is proposed by directly using network error information. First, the corresponding network error event sequence for each node is constructed using multiple-layer network error information. Then, the generalized zero inflated Poisson process(GZIP) model is established for each node based on the error event sequence. Finally, the stochastic model is constructed to predict the MTTB of the node. The accelerated case studies with different error injection rates are conducted on a laboratory network to demonstrate the proposed method, where the network errors are generated by a computer controlled error injection system. Experiment results show that the MTTB of nodes predicted by the proposed method agree well with observations in the case studies. The proposed data driven node time to bus-off assessment method for CAN networks can successfully predict the MTTB of nodes by directly using network error event data.

  5. Development of space manufacturing systems concepts utilizing lunar resources

    NASA Technical Reports Server (NTRS)

    Bock, E. H.

    1979-01-01

    Results of a NASA sponsored study to evaluate the merits of constructing solar power satellites using lunar and terrestrial resources are reviewed. Three representative lunar resources utilization (LRU) concepts were developed and compared with a previously designed earth baseline concept, and major system hardware elements as well as personnel requirements were defined. LRU for space construction was shown to be competitive with earth baseline approach for a program requiring 10 to the 5th metric tons per year of completed satellites. Results also indicated that LRU can reduce earth launched cargo requirements to less than 10% of that needed to build satellites exclusively from earth materials, with a significant percentage of the reduction due to the use of liquid oxygen derived from lunar soil. A concept using the mass driver to catapult lunar material into space was found to be superior to the other LRU logistics techniques investigated.

  6. Review of Polyimides Used in the Manufacturing of Micro Systems

    NASA Technical Reports Server (NTRS)

    Wilson, William C.; Atkinson, Gary M.

    2007-01-01

    Since their invention, polyimides have found numerous uses in MicroElectroMechanical Systems (MEMS) technology. Polyimides can act as photoresist, sacrificial layers, structural layers, and even as a replacement for silicon as the substrate during MEMS fabrication. They enable fabrication of both low and high aspect ratio devices. Polyimides have been used to fabricate expendable molds and reusable flexible molds. Development of a variety of devices that employ polyimides for sensor applications has occurred. Micro-robotic actuator applications include hinges, thermal actuators and residual stress actuators. Currently, polyimides are being used to create new sensors and devices for aerospace applications. This paper presents a review of some of the many uses of polyimides in the development of MEMS devices, including a new polyimide based MEMS fabrication process.

  7. Agile Science Operations: A New Approach for Primitive Exploration Bodies

    NASA Technical Reports Server (NTRS)

    Chien, Steve A.; Thompson, David R.; Castillo-Rogez, Julie C.; Doyle, Richard; Estlin, Tara; Mclaren, David

    2012-01-01

    Primitive body exploration missions such as potential Comet Surface Sample Return or Trojan Tour and Rendezvous would challenge traditional operations practices. Earth-based observations would provide only basic understanding before arrival and many science goals would be defined during the initial rendezvous. It could be necessary to revise trajectories and observation plans to quickly characterize the target for safe, effective observations. Detection of outgassing activity and monitoring of comet surface activity are even more time constrained, with events occurring faster than round-trip light time. "Agile science operations" address these challenges with contingency plans that recognize the intrinsic uncertainty in the operating environment and science objectives. Planning for multiple alternatives can significantly improve the time required to repair and validate spacecraft command sequences. When appropriate, time-critical decisions can be automated and shifted to the spacecraft for immediate access to instrument data. Mirrored planning systems on both sides of the light-time gap permit transfer of authority back and forth as needed. We survey relevant science objectives, identifying time bottlenecks and the techniques that could be used to speed missions' reaction to new science data. Finally, we discuss the results of a trade study simulating agile observations during flyby and comet rendezvous scenarios. These experiments quantify instrument coverage of key surface features as a function of planning turnaround time. Careful application of agile operations techniques can play a significant role in realizing the Decadal Survey plan for primitive body exploration

  8. Desktop Manufacturing Technologies.

    ERIC Educational Resources Information Center

    Snyder, Mark

    1991-01-01

    Desktop manufacturing is the use of data from a computer-assisted design system to construct actual models of an object. Emerging processes are stereolithography, laser sintering, ballistic particle manufacturing, laminated object manufacturing, and photochemical machining. (SK)

  9. "Agile" Battery Technology Transfer-Lessons Learnt

    NASA Astrophysics Data System (ADS)

    Sabatini, P.; Annoni, G.; Grossi, R.; Alia, Sergio; Reulier, David

    2008-09-01

    AGILE, the high energy astrophysics mission of the Italian Space Agency launched on April 23rd 2007, is the first LEO satellite to be powered by Saft's commercially available space qualified MPS176065 rechargeable lithium ion batteries.Saft and Carlo Gavazzi Space (CGS) have achieved a successful technology transfer replacing Ni-H2 batteries with high energy lithium ion batteries in a full speed program (4 months) and with a cost effective approach. The battery system comprises 2 x 24 Saft MPS176065 space qualified Li-ion cells in an 8s3p configuration (3 parallel arrays each composed by 8 series cell) with a nominal capacity of 2 x 480 Wh and an integral autonomous cell balancing system that ensures the maximum possible battery life.The MPS176065 space qualified cell is based on Saft's well proven MP series of prismatic rechargeable Li-ion batteries. It offers an extremely high capacity made possible by the stainless steel prismatic container that makes use of the volume which is otherwise lost when conventional cylindrical cells are packed together. A single prismatic cell has about 20% more volumetric energy density than an equivalent pack of cylindrical cells.

  10. Human factoring the procedures element in a complex manufacturing system

    SciTech Connect

    Caccamise, D.J.; Mecherikoff, M.

    1993-06-01

    As a result of Human Factors evaluations of procedures associated with incidents at Rocky Flats Plant (RFP) it was determined that the existing procedure format created significant opportunities for confusion in their attempt to convey information about a work process. For instance, there was no mechanism to clearly identify the participants and their roles during the instructions portion of the procedure. In addition, procedure authors frequently used complex logic to convey a series of contingent actions within steps. It was also difficult to discern the actual procedure steps from other types of information in the procedure. These and other inadequacies prompted the Human Factors Engineering (HFE) department to propose solutions to these problems that followed well-researched principles of cognitive psychology, dealing with how humans process information. Format and style contribute to procedure usability, and therefore to safety and efficiency in operations governed by the procedures. Since it was difficult to tie specific performance failures to specific format and style characteristics and thereby dearly define costs and benefits, it was difficult on that basis to sell the idea that changes in procedure format and style were really necessary to improve safety and efficiency. In addition, we found that the socio-political systems governing this process, particularly at the subprocess interface level, were not functioning efficiently. Both the technological aspects of the process and the socio-political aspects were contributing to waste and considerable re-work. Fixing the customer feedback loop to the process owners not only minimized re-work and waste, but also provided the data to persuade subprocess owners to make the necessary changes that heretofore were being met with great resistance.

  11. Toxic Substances Registry System: Index of Material Safety Data Sheets. Volume 1; Manufacturer

    NASA Technical Reports Server (NTRS)

    1998-01-01

    The April 1998 revision of the Index of Materials Safety Data Sheets (MSDS) for the Kennedy Space Center (KSC) Toxic Substances Registry System (TSRS) is presented. The MSDS lists toxic substances by manufacturer, trade name, stock number, and distributor. The index provides information on hazards, use, and chemical composition of materials stored at KSC.

  12. Manufacturing injection-moleded Fresnel lens parquets for point-focus concentrating photovoltaic systems

    SciTech Connect

    Peters, E.M.; Masso, J.D.

    1995-10-01

    This project involved the manufacturing of curved-faceted, injection-molded, four-element Fresnel lens parquets for concentrating photovoltaic arrays. Previous efforts showed that high-efficiency (greater than 82%) Fresnel concentrators could be injection molded. This report encompasses the mold design, molding, and physical testing of a four-lens parquet for a solar photovoltaic concentrator system.

  13. Materials, Processes and Manufacturing in Ares 1 Upper Stage: Integration with Systems Design and Development

    NASA Technical Reports Server (NTRS)

    Bhat, Biliyar N.

    2008-01-01

    Ares I Crew Launch Vehicle Upper Stage is designed and developed based on sound systems engineering principles. Systems Engineering starts with Concept of Operations and Mission requirements, which in turn determine the launch system architecture and its performance requirements. The Ares I-Upper Stage is designed and developed to meet these requirements. Designers depend on the support from materials, processes and manufacturing during the design, development and verification of subsystems and components. The requirements relative to reliability, safety, operability and availability are also dependent on materials availability, characterization, process maturation and vendor support. This paper discusses the roles and responsibilities of materials and manufacturing engineering during the various phases of Ares IUS development, including design and analysis, hardware development, test and verification. Emphasis is placed how materials, processes and manufacturing support is integrated over the Upper Stage Project, both horizontally and vertically. In addition, the paper describes the approach used to ensure compliance with materials, processes, and manufacturing requirements during the project cycle, with focus on hardware systems design and development.

  14. RFID Based e-quality tracking in service-oriented manufacturing execution system

    NASA Astrophysics Data System (ADS)

    Fu, Yingbin; Jiang, Pingyu

    2012-09-01

    The method of acquiring the real-time data has influenced the implementation of the manufacturing execution system (MES). Accompanied with turning the MES into service-oriented manufacturing execution system (so-MES), real-time e-quality tracking (e-QT), in which real-time data are computed, has played more and more important roles in manufacturing. This paper presents an e-QT model through the study of real-time status data tracking and quality data collecting. An implementing architecture of the e-QT model is constructed on the basis of radio frequency identification devices (RFID) data-tracking network. In order to develop the e-QT system, some key enabling technologies, such as configuration, data collection, and data processing, etc, are studied. The relation schema between hardware is built for the RFID data-tracking network based on the configuration technique. Real-time data are sampled by using data collecting technique. Furthermore, real-time status and quality data in a shop-floor can be acquired in terms of using the real-time data computing method. Finally, a prototype system is developed and a running example is given so as to verify the feasibility of methods proposed in this paper. The proposed research provides effective e-quality tracking theoretical foundation through the use of RFID technology for the discrete manufacturing.

  15. A Transportation Model for a Space Colonization and Manufacturing System: A Q-GERT Simulation.

    DTIC Science & Technology

    1982-12-01

    RAD-RI247685 A TRANSPORTATION MODEL OR A SPACE COLONIZATION AND1/ MANUFACTURING SYSTEM:..U) AIR FORCE INST OF TECH NRIGHT-PATTERSON AFB OH SCHOOL OF...it$ ""distribution is unlimitd- L CTF r DEPARTMENT OF THE AIR FORCE FEB 22 3 C.. AIR UNIVERSITY (ATC) • AIR FORCE INSTITUTE OF TECHNOLOG L&J Wright...Patterson Air Force Base, Ohio _ rig 2Z. 1" 7 AF IT/GSO/OS/82D-6 A TRANSPORTATION MODEL F AR SPACE . I a, cND MANUFACTURING SY-TEM: A 0--CtERT

  16. Integrated CAD/CAM/CNC system based on STEP-NC and intelligent manufacturing

    NASA Astrophysics Data System (ADS)

    Du, Juan; Tian, Xitian; Zhang, Zhenming; Xu, Jianxin; Zhu, Mingquan

    2005-12-01

    In order to realize bi-direction exchange of information and knowledge sharing between CAD/CAM systems and CNC machines, a method of information integration was proposed based on process data model and STEP-NC neutral file. A frame of integrated CAD/CAM/CNC systems was established, and the key integration techniques including process data modeling based on XML form and automatic feature recognition were studied. Since the STEP-NC based CNC (STEP- CNC) system can undertake various intelligent functions that cannot be performed by the conventional CNC based on ISO 6983, the intelligent manufacturing functions of STEP- CNC system was also discussed. The presented methodology combining with the modern net and communication technologies provides an effective means for developing intelligent, integrated manufacturing systems for the 21 century.

  17. Research and exploitation of CNC laser manufacturing online monitoring system based on OpenGL

    NASA Astrophysics Data System (ADS)

    Wang, Gang; Hu, Shengsun; Wang, Mingjian; Ding, Wei; Zhao, Jie

    2010-12-01

    CNC manufacturing online monitoring technology is a significant method to improve the processing quality and achieve an important part of intelligent processing. Based on OpenGL 3D graphics technology, a Computer Numerical Control (CNC ) Laser Manufacturing 3D model is established; based on the model and the powerful ability of OpenGL, a CNC manufacturing on-line monitoring system is developed so as to achieve the ability of CNC remote real-time online monitoring in different working locations. Remote real-time online monitoring of different position of the CNC is realized. The online monitoring scope of the CNC is enlarged, with more flexibility to meet the demands of practical application, meanwhile the cost of hardware investment is greatly reduced.

  18. Part A - Advanced turbine systems. Part B - Materials/manufacturing element of the Advanced Turbine Systems Program

    SciTech Connect

    Karnitz, M.A.

    1996-06-01

    The DOE Offices of Fossil Energy and Energy Efficiency and Renewable Energy have initiated a program to develop advanced turbine systems for power generation. The objective of the Advanced Turbine Systems (ATS) Program is to develop ultra-high efficiency, environmentally superior, and cost competitive gas turbine systems for utility and industrial applications. One of the supporting elements of the ATS Program is the Materials/Manufacturing Technologies Task. The objective of this element is to address the critical materials and manufacturing issues for both industrial and utility gas turbines.

  19. Sustainable design and manufacturing of multifunctional polymer nanocomposite coatings: A multiscale systems approach

    NASA Astrophysics Data System (ADS)

    Xiao, Jie

    Polymer nanocomposites have a great potential to be a dominant coating material in a wide range of applications in the automotive, aerospace, ship-making, construction, and pharmaceutical industries. However, how to realize design sustainability of this type of nanostructured materials and how to ensure the true optimality of the product quality and process performance in coating manufacturing remain as a mountaintop area. The major challenges arise from the intrinsic multiscale nature of the material-process-product system and the need to manipulate the high levels of complexity and uncertainty in design and manufacturing processes. This research centers on the development of a comprehensive multiscale computational methodology and a computer-aided tool set that can facilitate multifunctional nanocoating design and application from novel function envisioning and idea refinement, to knowledge discovery and design solution derivation, and further to performance testing in industrial applications and life cycle analysis. The principal idea is to achieve exceptional system performance through concurrent characterization and optimization of materials, product and associated manufacturing processes covering a wide range of length and time scales. Multiscale modeling and simulation techniques ranging from microscopic molecular modeling to classical continuum modeling are seamlessly coupled. The tight integration of different methods and theories at individual scales allows the prediction of macroscopic coating performance from the fundamental molecular behavior. Goal-oriented design is also pursued by integrating additional methods for bio-inspired dynamic optimization and computational task management that can be implemented in a hierarchical computing architecture. Furthermore, multiscale systems methodologies are developed to achieve the best possible material application towards sustainable manufacturing. Automotive coating manufacturing, that involves paint spay and

  20. Improving Energy Efficiency in Pharmaceutical ManufacturingOperations -- Part I: Motors, Drives and Compressed Air Systems

    SciTech Connect

    Galitsky, Christina; Chang, Sheng-chien; Worrell, Ernst; Masanet,Eric

    2006-04-01

    In Part I of this two-part series, we focus on efficient use of motors, drives and pumps, both for process equipment and compressed air systems. Pharmaceutical manufacturing plants in the U.S. spend nearly $1 billion each year for the fuel and electricity they need to keep their facilities running (Figure 1, below). That total that can increase dramatically when fuel supplies tighten and oil prices rise, as they did last year. Improving energy efficiency should be a strategic goal for any plant manager or manufacturing professional working in the drug industry today. Not only can energy efficiency reduce overall manufacturing costs, it usually reduces environmental emissions, establishing a strong foundation for a corporate greenhouse-gas-management program. For most pharmaceutical manufacturing plants, Heating, Ventilation and Air Conditioning (HVAC) is typically the largest consumer of energy, as shown in Table 1 below. This two-part series will examine energy use within pharmaceutical facilities, summarize best practices and examine potential savings and return on investment. In this first article, we will focus on efficient use of motors, drives and pumps, both for process equipment and compressed air systems. Part 2, to be published in May, will focus on overall HVAC systems, building management and boilers.

  1. Gamma-ray Astrophysics with AGILE

    SciTech Connect

    Longo, Francesco |; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-07-12

    AGILE will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational in spring 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources. Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV AGILE is now (March 2007) undergoing launcher integration and testing. The PLSV launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  2. An intelligent CNC machine control system architecture

    SciTech Connect

    Miller, D.J.; Loucks, C.S.

    1996-10-01

    Intelligent, agile manufacturing relies on automated programming of digitally controlled processes. Currently, processes such as Computer Numerically Controlled (CNC) machining are difficult to automate because of highly restrictive controllers and poor software environments. It is also difficult to utilize sensors and process models for adaptive control, or to integrate machining processes with other tasks within a factory floor setting. As part of a Laboratory Directed Research and Development (LDRD) program, a CNC machine control system architecture based on object-oriented design and graphical programming has been developed to address some of these problems and to demonstrate automated agile machining applications using platform-independent software.

  3. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  4. Agile enterprise development framework utilizing services principles for building pervasive security

    NASA Astrophysics Data System (ADS)

    Farroha, Deborah; Farroha, Bassam

    2011-06-01

    We are in an environment of continuously changing mission requirements and therefore our Information Systems must adapt to accomplish new tasks, quicker, in a more proficient manner. Agility is the only way we will be able to keep up with this change. But there are subtleties that must be considered as we adopt various agile methods: secure, protect, control and authenticate are all elements needed to posture our Information Technology systems to counteract the real and perceived threats in today's environment. Many systems have been tasked to ingest process and analyze different data sets than they were originally designed for and they have to interact with multiple new systems that were unaccounted for at design time. Leveraging the tenets of security, we have devised a new framework that takes agility into a new realm where the product will built to work in a service-based environment but is developed using agile processes. Even though these two criteria promise to hone the development effort, they actually contradict each other in philosophy where Services require stable interfaces, while Agile focuses on being flexible and tolerate changes up to much later stages of development. This framework is focused on enabling a successful product development that capitalizes on both philosophies.

  5. The Southern Argentine Agile Meteor Radar (SAAMER)

    NASA Astrophysics Data System (ADS)

    Janches, Diego

    2014-11-01

    The Southern Argentina Agile Meteor Radar (SAAMER) is a new generation system deployed in Rio Grande, Tierra del Fuego, Argentina (53 S) in May 2008. SAAMER transmits 10 times more power than regular meteor radars, and uses a newly developed transmitting array, which focuses power upward instead of the traditional single-antenna-all-sky configuration. The system is configured such that the transmitter array can also be utilized as a receiver. The new design greatly increases the sensitivity of the radar enabling the detection of large number of particles at low zenith angles. The more concentrated transmitted power enables additional meteor studies besides those typical of these systems based on the detection of specular reflections, such as routine detections of head echoes and non-specular trails, previously only possible with High Power and Large Aperture radars. In August 2010, SAAMER was upgraded to a system capable to determine meteoroid orbital parameters. This was achieved by adding two remote receiving stations approximately 10 km away from the main site in near perpendicular directions. The upgrade significantly expands the science that is achieved with this new radar enabling us to study the orbital properties of the interplanetary dust environment. Because of the unique geographical location, SAAMER allows for additional inter-hemispheric comparison with measurements from Canadian Meteor Orbit Radar, which is geographically conjugate. Initial surveys show, for example, that SAAMER observes a very strong contribution of the South Toroidal Sporadic meteor source, of which limited observational data is available. In addition, SAAMER offers similar unique capabilities for meteor showers and streams studies given the range of ecliptic latitudes that the system enables detailed study of showers at high southern latitudes (e.g July Phoenicids or Puppids complex). Finally, SAAMER is ideal for the deployment of complementary instrumentation in both, permanent

  6. A Multi-Agent Approach to the Simulation of Robotized Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Foit, K.; Gwiazda, A.; Banaś, W.

    2016-08-01

    The recent years of eventful industry development, brought many competing products, addressed to the same market segment. The shortening of a development cycle became a necessity if the company would like to be competitive. Because of switching to the Intelligent Manufacturing model the industry search for new scheduling algorithms, while the traditional ones do not meet the current requirements. The agent-based approach has been considered by many researchers as an important way of evolution of modern manufacturing systems. Due to the properties of the multi-agent systems, this methodology is very helpful during creation of the model of production system, allowing depicting both processing and informational part. The complexity of such approach makes the analysis impossible without the computer assistance. Computer simulation still uses a mathematical model to recreate a real situation, but nowadays the 2D or 3D virtual environments or even virtual reality have been used for realistic illustration of the considered systems. This paper will focus on robotized manufacturing system and will present the one of possible approaches to the simulation of such systems. The selection of multi-agent approach is motivated by the flexibility of this solution that offers the modularity, robustness and autonomy.

  7. SuperAGILE and Gamma Ray Bursts

    SciTech Connect

    Pacciani, Luigi; Costa, Enrico; Del Monte, Ettore; Donnarumma, Immacolata; Evangelista, Yuri; Feroci, Marco; Frutti, Massimo; Lazzarotto, Francesco; Lapshov, Igor; Rubini, Alda; Soffitta, Paolo; Tavani, Marco; Barbiellini, Guido; Mastropietro, Marcello; Morelli, Ennio; Rapisarda, Massimo

    2006-05-19

    The solid-state hard X-ray imager of AGILE gamma-ray mission -- SuperAGILE -- has a six arcmin on-axis angular resolution in the 15-45 keV range, a field of view in excess of 1 steradian. The instrument is very light: 5 kg only. It is equipped with an on-board self triggering logic, image deconvolution, and it is able to transmit the coordinates of a GRB to the ground in real-time through the ORBCOMM constellation of satellites. Photon by photon Scientific Data are sent to the Malindi ground station at every contact. In this paper we review the performance of the SuperAGILE experiment (scheduled for a launch in the middle of 2006), after its first onground calibrations, and show the perspectives for Gamma Ray Bursts.

  8. An investigation of fighter aircraft agility

    NASA Technical Reports Server (NTRS)

    Valasek, John; Downing, David R.

    1993-01-01

    This report attempts to unify in a single document the results of a series of studies on fighter aircraft agility funded by the NASA Ames Research Center, Dryden Flight Research Facility and conducted at the University of Kansas Flight Research Laboratory during the period January 1989 through December 1993. New metrics proposed by pilots and the research community to assess fighter aircraft agility are collected and analyzed. The report develops a framework for understanding the context into which the various proposed fighter agility metrics fit in terms of application and testing. Since new metrics continue to be proposed, this report does not claim to contain every proposed fighter agility metric. Flight test procedures, test constraints, and related criteria are developed. Instrumentation required to quantify agility via flight test is considered, as is the sensitivity of the candidate metrics to deviations from nominal pilot command inputs, which is studied in detail. Instead of supplying specific, detailed conclusions about the relevance or utility of one candidate metric versus another, the authors have attempted to provide sufficient data and analyses for readers to formulate their own conclusions. Readers are therefore ultimately responsible for judging exactly which metrics are 'best' for their particular needs. Additionally, it is not the intent of the authors to suggest combat tactics or other actual operational uses of the results and data in this report. This has been left up to the user community. Twenty of the candidate agility metrics were selected for evaluation with high fidelity, nonlinear, non real-time flight simulation computer programs of the F-5A Freedom Fighter, F-16A Fighting Falcon, F-18A Hornet, and X-29A. The information and data presented on the 20 candidate metrics which were evaluated will assist interested readers in conducting their own extensive investigations. The report provides a definition and analysis of each metric; details

  9. Airborne Windshear Detection and Warning Systems. Fifth and Final Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Delnore, Victor E. (Compiler)

    1994-01-01

    The Fifth Combined Manufacturers' and Technologists' Airborne Windshear Review Meeting was hosted by the NASA Langley Research Center and the Federal Aviation Administration in Hampton, Virginia, on September 28-30, 1993. The purpose was to report on the highly successful windshear experiments conducted by government, academic institutions, and industry; to transfer the results to regulators, manufacturers, and users; and to set initiatives for future aeronautics technology research. The formal sessions covered recent developments in windshear flight testing, windshear modeling, flight management, and ground-based systems, airborne windshear detection systems, certification and regulatory issues, and development and applications of sensors for wake vortices and for synthetic and enhanced vision systems. This report was compiled to record and make available the technology updates and materials from the conference.

  10. Airborne Windshear Detection and Warning Systems. Fifth and Final Combined Manufacturers' and Technologists' Conference, part 1

    NASA Technical Reports Server (NTRS)

    Delnore, Victor E. (Compiler)

    1994-01-01

    The Fifth (and Final) Combined Manufacturers' and Technologists' Airborne Windshear Review Meeting was hosted jointly by the NASA Langley Research Center (LaRC) and the Federal Aviation Administration (FAA) in Hampton, Virginia, on September 28-30, 1993. The purpose of the meeting was to report on the highly successful windshear experiments conducted by government, academic institutions, and industry; to transfer the results to regulators, manufacturers, and users; and to set initiatives for future aeronautics technology research. The formal sessions covered recent developments in windshear flight testing; windshear modeling, flight management, and ground-based systems; airborne windshear detection systems; certification and regulatory issues; development and applications of sensors for wake vortex detection; and synthetic and enhanced vision systems.

  11. Proceedings of the IMOG (Interagency Manufacturing Operations Group) Numerical Systems Group. 62nd Meeting

    SciTech Connect

    Maes, G.J.

    1993-10-01

    This document contains the proceedings of the 62nd Interagency Manufacturing Operations Group (IMOG) Numerical Systems Group. Included are the minutes of the 61st meeting and the agenda for the 62nd meeting. Presentations at the meeting are provided in the appendices to this document. Presentations were: 1992 NSG Annual Report to IMOG Steering Committee; Charter for the IMOG Numerical Systems Group; Y-12 Coordinate Measuring Machine Training Project; IBH NC Controller; Automatically Programmed Metrology Update; Certification of Anvil-5000 for Production Use at the Y-12 Plant; Accord Project; Sandia National Laboratories {open_quotes}Accord{close_quotes}; Demo/Anvil Tool Path Generation 5-Axis; Demo/Video Machine/Robot Animation Dynamics; Demo/Certification of Anvil Tool Path Generation; Tour of the M-60 Inspection Machine; Distributed Numerical Control Certification; Spline Usage Method; Y-12 NC Engineering Status; and Y-12 Manufacturing CAD Systems.

  12. Stochastic extension of cellular manufacturing systems: a queuing-based analysis

    NASA Astrophysics Data System (ADS)

    Fardis, Fatemeh; Zandi, Afagh; Ghezavati, Vahidreza

    2013-07-01

    Clustering parts and machines into part families and machine cells is a major decision in the design of cellular manufacturing systems which is defined as cell formation. This paper presents a non-linear mixed integer programming model to design cellular manufacturing systems which assumes that the arrival rate of parts into cells and machine service rate are stochastic parameters and described by exponential distribution. Uncertain situations may create a queue behind each machine; therefore, we will consider the average waiting time of parts behind each machine in order to have an efficient system. The objective function will minimize summation of idleness cost of machines, sub-contracting cost for exceptional parts, non-utilizing machine cost, and holding cost of parts in the cells. Finally, the linearized model will be solved by the Cplex solver of GAMS, and sensitivity analysis will be performed to illustrate the effectiveness of the parameters.

  13. The Influence of Agility Training on Physiological and Cognitive Performance

    DTIC Science & Technology

    2010-11-01

    training, subjects completed a physical and cognitive battery of serum cortisol, VO2max, vertical jump , reaction time, Illinois Agility Test , body...strong trends toward the agility group improving more than the traditional group on VO2max (p=0.12), vertical jump (p=0.06), Illinois Agility Test ...levels, maximal oxygen uptake, Illinois Agility Test , Makoto reaction time, and vertical jump . The cognitive portion of the testing sessions

  14. Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

    NASA Astrophysics Data System (ADS)

    Hussein, Abdullahi; Cheng, Kai

    2016-10-01

    Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

  15. Proposal of a Methodology for Implementing a Service-Oriented Architecture in Distributed Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Medina, I.; Garcia-Dominguez, A.; Aguayo, F.; Sevilla, L.; Marcos, M.

    2009-11-01

    As envisioned by Intelligent Manufacturing Systems (IMS), Next Generation Manufacturing Systems (NGMS) will satisfy the needs of an increasingly fast-paced and demanding market by dynamically integrating systems from inside and outside the manufacturing firm itself into a so-called extended enterprise. However, organizing these systems to ensure the maximum flexibility and interoperability with those from other organizations is difficult. Additionally, a defect in the system would have a great impact: it would affect not only its owner, but also its partners. For these reasons, we argue that a service-oriented architecture (SOA) would be a good candidate. It should be designed following a methodology where services play a central role, instead of being an implementation detail. In order for the architecture to be reliable enough as a whole, the methodology will need to help find errors before they arise in a production environment. In this paper we propose using SOA-specific testing techniques, compare some of the existing methodologies and outline several extensions upon one of them to integrate testing techniques.

  16. Modification Of The Manufacturing Process Of A Composite Structure- From System Needs To Elementary Tests

    NASA Astrophysics Data System (ADS)

    Touzard, Jerome; Veilleraud, Frederic; Collias, Michael

    2012-07-01

    The SYLDA5 structure (SYstème de Lancement Double Ariane 5 - Ariane 5 dual launch system) is a lightweight carbon composite structure designed and manufactured by Astrium Space Transportation at Les Mureaux premises. In order to improve the manufacturing process of t he SYLDA5, a proposal was made by SYLDA5 technical team to change the manufacturing process of the composite sandwich parts. The SYLDA5 is however one of the main contributors in the dynamic behaviour of the upper part of Ariane 5 launcher and plays an important role in the qualification of the launcher. The present paper describes the overall qualification logic retained, from System requirements to material tests and to global System qualification, in a classical V- type design cycle. It demonstrates the necessity to take into account System needs when modifying a part of it, especially when the System is qualified with actual characteristics of t he parts that may not be defined in product’s initial requirements.

  17. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System

    SciTech Connect

    Babu, Sudarsanam Suresh; Love, Lonnie J.; Peter, William H.; Dehoff, Ryan

    2016-05-01

    ) systems development, (iv) material feedstock, (v) process planning, (vi) residual stress & distortion, (vii) post-processing, (viii) qualification of parts, (ix) supply chain and (x) business case. Furthermore, an open innovation network methodology was proposed to accelerate the development and deployment of new large-scale metal additive manufacturing technology with the goal of creating a new generation of high deposition rate equipment, affordable feed stocks, and large metallic components to enhance America’s economic competitiveness.

  18. A novel microgrid demand-side management system for manufacturing facilities

    NASA Astrophysics Data System (ADS)

    Harper, Terance J.

    Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

  19. A proposal for a drug product Manufacturing Classification System (MCS) for oral solid dosage forms.

    PubMed

    Leane, Michael; Pitt, Kendal; Reynolds, Gavin

    2015-01-01

    This paper proposes the development of a drug product Manufacturing Classification System (MCS) based on processing route. It summarizes conclusions from a dedicated APS conference and subsequent discussion within APS focus groups and the MCS working party. The MCS is intended as a tool for pharmaceutical scientists to rank the feasibility of different processing routes for the manufacture of oral solid dosage forms, based on selected properties of the API and the needs of the formulation. It has many applications in pharmaceutical development, in particular, it will provide a common understanding of risk by defining what the "right particles" are, enable the selection of the best process, and aid subsequent transfer to manufacturing. The ultimate aim is one of prediction of product developability and processability based upon previous experience. This paper is intended to stimulate contribution from a broad range of stakeholders to develop the MCS concept further and apply it to practice. In particular, opinions are sought on what API properties are important when selecting or modifying materials to enable an efficient and robust pharmaceutical manufacturing process. Feedback can be given by replying to our dedicated e-mail address (mcs@apsgb.org); completing the survey on our LinkedIn site; or by attending one of our planned conference roundtable sessions.

  20. The application of virtual reality systems as a support of digital manufacturing and logistics

    NASA Astrophysics Data System (ADS)

    Golda, G.; Kampa, A.; Paprocka, I.

    2016-08-01

    Modern trends in development of computer aided techniques are heading toward the integration of design competitive products and so-called "digital manufacturing and logistics", supported by computer simulation software. All phases of product lifecycle: starting from design of a new product, through planning and control of manufacturing, assembly, internal logistics and repairs, quality control, distribution to customers and after-sale service, up to its recycling or utilization should be aided and managed by advanced packages of product lifecycle management software. Important problems for providing the efficient flow of materials in supply chain management of whole product lifecycle, using computer simulation will be described on that paper. Authors will pay attention to the processes of acquiring relevant information and correct data, necessary for virtual modeling and computer simulation of integrated manufacturing and logistics systems. The article describes possibilities of use an applications of virtual reality software for modeling and simulation the production and logistics processes in enterprise in different aspects of product lifecycle management. The authors demonstrate effective method of creating computer simulations for digital manufacturing and logistics and show modeled and programmed examples and solutions. They pay attention to development trends and show options of the applications that go beyond enterprise.

  1. The importance of manufacturing processes and their control for the reliability of CPV systems

    NASA Astrophysics Data System (ADS)

    Gombert, Andreas; Rubio, Francisca

    2013-09-01

    Highly concentrating photovoltaic systems (HCPV) based on III-V multi-junction solar cells entered the PV market recently. Since 2008, HCPV power plants operate in various countries and valuable experiences could be gained. Reliability and durability of CPV power plant components are very much impacting the overall life cycle costs of a CPV power plant. Especially the CPV module is a critical component when considering system life time and overall economics. Soitec's CPV Modules based on Concentrix{trade mark, serif} technology are designed for outstanding robustness and reliability even under harsh environmental conditions. The reliability of a CPV module depends significantly on the manufacturing processes and their control. Therefore it is important to design CPV modules for manufacturability.

  2. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    NASA Astrophysics Data System (ADS)

    2016-02-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

  3. Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture

    DOEpatents

    Lassahn, Gordon D.; Lancaster, Gregory D.; Apel, William A.; Thompson, Vicki S.

    2013-01-08

    Image portion identification methods, image parsing methods, image parsing systems, and articles of manufacture are described. According to one embodiment, an image portion identification method includes accessing data regarding an image depicting a plurality of biological substrates corresponding to at least one biological sample and indicating presence of at least one biological indicator within the biological sample and, using processing circuitry, automatically identifying a portion of the image depicting one of the biological substrates but not others of the biological substrates.

  4. Applying generalized stochastic Petri nets to manufacturing systems containing nonexponential transition functions

    NASA Technical Reports Server (NTRS)

    Watson, James F., III; Desrochers, Alan A.

    1991-01-01

    Generalized stochastic Petri nets (GSPNs) are applied to flexible manufacturing systems (FMSs). Throughput subnets and s-transitions are presented. Two FMS examples containing nonexponential distributions which were analyzed in previous papers by queuing theory and probability theory, respectively, are treated using GSPNs developed using throughput subnets and s-transitions. The GSPN results agree with the previous results, and developing and analyzing the GSPN models are straightforward and relatively easy compared to other methodologies.

  5. Planning and design of a knowledge based system for green manufacturing management

    NASA Astrophysics Data System (ADS)

    Kamal Mohd Nawawi, Mohd; Mohd Zuki Nik Mohamed, Nik; Shariff Adli Aminuddin, Adam

    2013-12-01

    This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization.

  6. Development of EarthCube Governance: An Agile Approach

    NASA Astrophysics Data System (ADS)

    Pearthree, G.; Allison, M. L.; Patten, K.

    2013-12-01

    Governance of geosciences cyberinfrastructure is a complex and essential undertaking, critical in enabling distributed knowledge communities to collaborate and communicate across disciplines, distances, and cultures. Advancing science with respect to 'grand challenges," such as global climate change, weather prediction, and core fundamental science, depends not just on technical cyber systems, but also on social systems for strategic planning, decision-making, project management, learning, teaching, and building a community of practice. Simply put, a robust, agile technical system depends on an equally robust and agile social system. Cyberinfrastructure development is wrapped in social, organizational and governance challenges, which may significantly impede progress. An agile development process is underway for governance of transformative investments in geosciences cyberinfrastructure through the NSF EarthCube initiative. Agile development is iterative and incremental, and promotes adaptive planning and rapid and flexible response. Such iterative deployment across a variety of EarthCube stakeholders encourages transparency, consensus, accountability, and inclusiveness. A project Secretariat acts as the coordinating body, carrying out duties for planning, organizing, communicating, and reporting. A broad coalition of stakeholder groups comprises an Assembly (Mainstream Scientists, Cyberinfrastructure Institutions, Information Technology/Computer Sciences, NSF EarthCube Investigators, Science Communities, EarthCube End-User Workshop Organizers, Professional Societies) to serve as a preliminary venue for identifying, evaluating, and testing potential governance models. To offer opportunity for broader end-user input, a crowd-source approach will engage stakeholders not involved otherwise. An Advisory Committee from the Earth, ocean, atmosphere, social, computer and library sciences is guiding the process from a high-level policy point of view. Developmental

  7. Performance evaluation of automated manufacturing systems using generalized stochastic Petri Nets. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Al-Jaar, Robert Y.; Desrochers, Alan A.

    1989-01-01

    The main objective of this research is to develop a generic modeling methodology with a flexible and modular framework to aid in the design and performance evaluation of integrated manufacturing systems using a unified model. After a thorough examination of the available modeling methods, the Petri Net approach was adopted. The concurrent and asynchronous nature of manufacturing systems are easily captured by Petri Net models. Three basic modules were developed: machine, buffer, and Decision Making Unit. The machine and buffer modules are used for modeling transfer lines and production networks. The Decision Making Unit models the functions of a computer node in a complex Decision Making Unit Architecture. The underlying model is a Generalized Stochastic Petri Net (GSPN) that can be used for performance evaluation and structural analysis. GSPN's were chosen because they help manage the complexity of modeling large manufacturing systems. There is no need to enumerate all the possible states of the Markov Chain since they are automatically generated from the GSPN model.

  8. Using Additive Manufacturing to Print a CubeSat Propulsion System

    NASA Technical Reports Server (NTRS)

    Marshall, William M.; Zemba, Michael; Shemelya, Corey; Wicker, Ryan; Espalin, David; MacDonald, Eric; Keif, Craig; Kwas, Andrew

    2015-01-01

    Small satellites, such as CubeSats, are increasingly being called upon to perform missions traditionally ascribed to larger satellite systems. However, the market of components and hardware for small satellites, particularly CubeSats, still falls short of providing the necessary capabilities required by ever increasing mission demands. One way to overcome this shortfall is to develop the ability to customize every build. By utilizing fabrication methods such as additive manufacturing, mission specific capabilities can be built into a system, or into the structure, that commercial off-the-shelf components may not be able to provide. A partnership between the University of Texas at El Paso, COSMIAC at the University of New Mexico, Northrop Grumman, and the NASA Glenn Research Center is looking into using additive manufacturing techniques to build a complete CubeSat, under the Small Spacecraft Technology Program. The W. M. Keck Center at the University of Texas at El Paso has previously demonstrated the ability to embed electronics and wires into the addtively manufactured structures. Using this technique, features such as antennas and propulsion systems can be included into the CubeSat structural body. Of interest to this paper, the team is investigating the ability to take a commercial micro pulsed plasma thruster and embed it into the printing process. Tests demonstrating the dielectric strength of the printed material and proof-of-concept demonstration of the printed thruster will be shown.

  9. Passive transdermal systems whitepaper incorporating current chemistry, manufacturing and controls (CMC) development principles.

    PubMed

    Van Buskirk, Glenn A; Arsulowicz, Daniel; Basu, Prabir; Block, Lawrence; Cai, Bing; Cleary, Gary W; Ghosh, Tapash; González, Mario A; Kanios, David; Marques, Margareth; Noonan, Patrick K; Ocheltree, Terrance; Schwarz, Peter; Shah, Vinod; Spencer, Thomas S; Tavares, Lino; Ulman, Katherine; Uppoor, Rajendra; Yeoh, Thean

    2012-03-01

    In this whitepaper, the Manufacturing Technical Committee (MTC) of the Product Quality Research Institute has updated the 1997 Transdermal Drug Delivery Systems Scale-Up and Post Approval Change workshop report findings to add important new product development and control principles. Important topics reviewed include ICH harmonization, quality by design, process analytical technologies, product and process validation, improvements to control of critical excipients, and discussion of Food and Drug Administration's Guidance on Residual Drug in Transdermal and Related Drug Delivery Systems as well as current thinking and trends on in vitro-in vivo correlation considerations for transdermal systems.

  10. Proposal and Practice of New Education System Based on The Conventional Education System for Mechanical Design and Manufacturing

    NASA Astrophysics Data System (ADS)

    Hashimura, Shinji; Hiroo, Yasuaki; Tanaka, Hiroshi; Nakao, Tetsuya; Harada, Toyomitsu; Nakatake, Yasuhito; Fujita, Masatoshi; Matsui, Satoru

    A new education system for the mechanical design and manufacturing based on the conventional education system has been proposed. The proposed system is considered as a main subject of the specialized subjects of the mechanical engineering department in Kurume National College of Technology. In the proposed system, students could master the way to use 3D-CAD due to making 3D models of a hand-powered winch. The students also learned way of the optimum design for strength due to making the winch handle using CAE/CAM and due to estimating its strength. As the results of analysis of education system, it was seen that the education of the conventional manual drawing and graphics is very important for the new design and manufacturing education.

  11. Exploring the possibility of modeling a genetic counseling guideline using agile methodology.

    PubMed

    Choi, Jeeyae

    2013-01-01

    Increased demand of genetic counseling services heightened the necessity of a computerized genetic counseling decision support system. In order to develop an effective and efficient computerized system, modeling of genetic counseling guideline is an essential step. Throughout this pilot study, Agile methodology with United Modeling Language (UML) was utilized to model a guideline. 13 tasks and 14 associated elements were extracted. Successfully constructed conceptual class and activity diagrams revealed that Agile methodology with UML was a suitable tool to modeling a genetic counseling guideline.

  12. Lean and Agile: An Epistemological Reflection

    ERIC Educational Resources Information Center

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  13. Achieving agility through parameter space qualification

    SciTech Connect

    Diegert, K.V.; Easterling, R.G.; Ashby, M.R.; Benavides, G.L.; Forsythe, C.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-02-01

    The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.

  14. The Holy Grail of Agile Acquisition

    DTIC Science & Technology

    2010-04-01

    Bestsellers …” [Erwin 2009] Motivation • Despite of Erwin’s recommendation… – Agility seems to be a simple concept and it is commonly perceived as a virtue...osd mil/dapaproject/>. . . Erwin 2009 Erwin, S.I., Washington Pulse, Pentagon Brass: Stay Away From Management Bestsellers , National Defense, August

  15. The role of multi-agent systems in improving performance of manufacturing robotized cells

    NASA Astrophysics Data System (ADS)

    Sękala, A.; Ćwikła, G.; Kost, G.

    2015-11-01

    Present market conditions causes that modern control systems of robotized manufacturing cells should be characterized by the much greater degree of flexibility, selforganization and, above all, adaptability to emerging outer excitations. The phenomenon of information distribution is one of the most important features of modern control systems. In the paper is presented the approach, based on application of multi-agent systems, for supporting the operation of robotized manufacturing cells. The aim of this approach is to obtain the flexible response to outer excitations and preventing situations that might cause the delay of the production process. The presented paper includes description of the concept of an informatics system designed for controlling the work of production systems, including work cells. Such systems could operate independently if it would be equipped with the selforganization mechanism. It is possible in the case of the proposed multi-agent system. The implementation of the presented concept will follow the present analysis of the described concept. The advantage of the proposed concept is its hierarchical depiction that allows integrating different utilized informatics tools in one complex system. It allows preparing the final computer program.

  16. Using Additive Manufacturing to Print a CubeSat Propulsion System

    NASA Technical Reports Server (NTRS)

    Marshall, William M.

    2015-01-01

    CubeSats are increasingly being utilized for missions traditionally ascribed to larger satellites CubeSat unit (1U) defined as 10 cm x 10 cm x 11 cm. Have been built up to 6U sizes. CubeSats are typically built up from commercially available off-the-shelf components, but have limited capabilities. By using additive manufacturing, mission specific capabilities (such as propulsion), can be built into a system. This effort is part of STMD Small Satellite program Printing the Complete CubeSat. Interest in propulsion concepts for CubeSats is rapidly gaining interest-Numerous concepts exist for CubeSat scale propulsion concepts. The focus of this effort is how to incorporate into structure using additive manufacturing. End-use of propulsion system dictates which type of system to develop-Pulse-mode RCS would require different system than a delta-V orbital maneuvering system. Team chose an RCS system based on available propulsion systems and feasibility of printing using a materials extrusion process. Initially investigated a cold-gas propulsion system for RCS applications-Materials extrusion process did not permit adequate sealing of part to make this a functional approach.

  17. Waveform-Agile Tracking In Heavy Sea Clutter

    DTIC Science & Technology

    2007-01-01

    Waveform-Agile Tracking In Heavy Sea Clutter Sandeep P. Sira , Antonia Papandreou-Suppappola, Darryl Morrell†, and Douglas Cochran SenSIP Center...to a non-adaptive system. The paper is organized as follows. In Section II, we describe the models for the target dynamics, clutter, and observations ...dependence on zs[n]. C. Observations Model At the end of Sub-dwell 2 of the kth dwell, the measurement provided to the tracker is Yk = [yTn̂0−nv

  18. Implementation of Lean System on Erbium Doped Fibre Amplifier Manufacturing Process to Reduce Production Time

    NASA Astrophysics Data System (ADS)

    Maneechote, T.; Luangpaiboon, P.

    2010-10-01

    A manufacturing process of erbium doped fibre amplifiers is complicated. It needs to meet the customers' requirements under a present economic status that products need to be shipped to customers as soon as possible after purchasing orders. This research aims to study and improve processes and production lines of erbium doped fibre amplifiers using lean manufacturing systems via an application of computer simulation. Three scenarios of lean tooled box systems are selected via the expert system. Firstly, the production schedule based on shipment date is combined with a first in first out control system. The second scenario focuses on a designed flow process plant layout. Finally, the previous flow process plant layout combines with production schedule based on shipment date including the first in first out control systems. The computer simulation with the limited data via an expected value is used to observe the performance of all scenarios. The most preferable resulted lean tooled box systems from a computer simulation are selected to implement in the real process of a production of erbium doped fibre amplifiers. A comparison is carried out to determine the actual performance measures via an analysis of variance of the response or the production time per unit achieved in each scenario. The goodness of an adequacy of the linear statistical model via experimental errors or residuals is also performed to check the normality, constant variance and independence of the residuals. The results show that a hybrid scenario of lean manufacturing system with the first in first out control and flow process plant lay out statistically leads to better performance in terms of the mean and variance of production times.

  19. AGILE and Gamma-Ray Bursts

    SciTech Connect

    Longo, Francesco; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2006-05-19

    AGILE is a Scientific Mission dedicated to high-energy astrophysics supported by ASI with scientific participation of INAF and INFN. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV. The broadband detection of GRBs and the study of implications for particle acceleration and high energy emission are primary goals of th emission. AGILE can image GRBs with 2-3 arcminutes error boxes in the hard X-ray range, and provide broadband photon-by photon detection in the 15-45 keV, 03-50 MeV, and 30 MeV-30 GeV energy ranges. Microsecond on-board photon tagging and a {approx} 100 microsecond gamma-ray detection deadtime will be crucial for fast GRB timing. On-board calculated GRB coordinates and energy fluxes will be quickly transmitted to the ground by an ORBCOMM transceiver. AGILE have recently (December 2005) completed its gamma-ray calibration. It is now (January 2006) undergoing satellite integration and testing. The PLSV launch is planned in early 2006. AGILE is then foreseen to be fully operational during the summer of 2006. It will be the only mission entirely dedicated to high-energy astrophysics above 30 MeV during the period mid-2006/mid-2007.

  20. Wired Widgets: Agile Visualization for Space Situational Awareness

    NASA Astrophysics Data System (ADS)

    Gerschefske, K.; Witmer, J.

    2012-09-01

    Continued advancement in sensors and analysis techniques have resulted in a wealth of Space Situational Awareness (SSA) data, made available via tools and Service Oriented Architectures (SOA) such as those in the Joint Space Operations Center Mission Systems (JMS) environment. Current visualization software cannot quickly adapt to rapidly changing missions and data, preventing operators and analysts from performing their jobs effectively. The value of this wealth of SSA data is not fully realized, as the operators' existing software is not built with the flexibility to consume new or changing sources of data or to rapidly customize their visualization as the mission evolves. While tools like the JMS user-defined operational picture (UDOP) have begun to fill this gap, this paper presents a further evolution, leveraging Web 2.0 technologies for maximum agility. We demonstrate a flexible Web widget framework with inter-widget data sharing, publish-subscribe eventing, and an API providing the basis for consumption of new data sources and adaptable visualization. Wired Widgets offers cross-portal widgets along with a widget communication framework and development toolkit for rapid new widget development, giving operators the ability to answer relevant questions as the mission evolves. Wired Widgets has been applied in a number of dynamic mission domains including disaster response, combat operations, and noncombatant evacuation scenarios. The variety of applications demonstrate that Wired Widgets provides a flexible, data driven solution for visualization in changing environments. In this paper, we show how, deployed in the Ozone Widget Framework portal environment, Wired Widgets can provide an agile, web-based visualization to support the SSA mission. Furthermore, we discuss how the tenets of agile visualization can generally be applied to the SSA problem space to provide operators flexibility, potentially informing future acquisition and system development.

  1. Investigating the strategic antecedents of agility in humanitarian logistics.

    PubMed

    L'Hermitte, Cécile; Brooks, Benjamin; Bowles, Marcus; Tatham, Peter H

    2016-12-16

    This study investigates the strategic antecedents of operational agility in humanitarian logistics. It began by identifying the particular actions to be taken at the strategic level of a humanitarian organisation to support field-level agility. Next, quantitative data (n=59) were collected on four strategic-level capabilities (being purposeful, action-focused, collaborative, and learning-oriented) and on operational agility (field responsiveness and flexibility). Using a quantitative analysis, the study tested the relationship between organisational capacity building and operational agility and found that the four strategic-level capabilities are fundamental building blocks of agility. Collectively they account for 52 per cent of the ability of humanitarian logisticians to deal with ongoing changes and disruptions in the field. This study emphasises the need for researchers and practitioners to embrace a broader perspective of agility in humanitarian logistics. In addition, it highlights the inherently strategic nature of agility, the development of which involves focusing simultaneously on multiple drivers.

  2. Space system production cost benefits from contemporary philosophies in management and manufacturing

    NASA Technical Reports Server (NTRS)

    Rosmait, Russell L.

    1991-01-01

    The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

  3. Global R&D through the Intelligent Manufacturing Systems (IMS) program

    NASA Astrophysics Data System (ADS)

    Huray, Paul G.

    1997-01-01

    The industry-led, international intelligent manufacturing systems (IMS) program provides a special vehicle for joint research and development between government, industry and academia in the United States, Canada, Japan, Australia, and Europe. Since its beginning in 1989, the IMS program has progressed through a feasibility phase which demonstrated that international legal barriers, trade issues, and intellectual property problems could be overcome. The program is constructed to provide higher quality design, customized products, shorter delivery cycles and lower costs. Interactions between partner companies have led to new business opportunities for mutual profit and some claim to have learned strategic information about their international competitors. The IMS program is growing through the participation of hundreds of corporate and university partners who share responsibilities in specific projects and jointly reap benefits for their manufacturing products and processes. The logic for choosing or not choosing the IMS mechanisms will be discussed and R and D projects will be identified.

  4. Designing a mathematical model for integrating dynamic cellular manufacturing into supply chain system

    NASA Astrophysics Data System (ADS)

    Aalaei, Amin; Davoudpour, Hamid

    2012-11-01

    This article presents designing a new mathematical model for integrating dynamic cellular manufacturing into supply chain system with an extensive coverage of important manufacturing features consideration of multiple plants location, multi-markets allocation, multi-period planning horizons with demand and part mix variation, machine capacity, and the main constraints are demand of markets satisfaction in each period, machine availability, machine time-capacity, worker assignment, available time of worker, production volume for each plant and the amounts allocated to each market. The aim of the proposed model is to minimize holding and outsourcing costs, inter-cell material handling cost, external transportation cost, procurement & maintenance and overhead cost of machines, setup cost, reconfiguration cost of machines installation and removal, hiring, firing and salary worker costs. Aimed to prove the potential benefits of such a design, presented an example is shown using a proposed model.

  5. Optical Design and Manufacturing of Fresnel Lenses for The First Korean High Concentration Solar PV System

    NASA Astrophysics Data System (ADS)

    Ryu, Kwangsun; Shin, Goo-Hwan; Cha, Wonho; Kang, Seongwon; Kim, Youngsik; Kang, Gi-Hwan

    2011-12-01

    In this study, we designed and optimized flat Fresnel lens and the light pipe to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the `grooves in' case has the better efficiency than that of `grooves out' case. Based on the ray-trace results, we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray-trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.

  6. Designing using manufacturing features

    NASA Astrophysics Data System (ADS)

    Szecsi, T.; Hoque, A. S. M.

    2012-04-01

    This paper presents a design system that enables the composition of a part using manufacturing features. Features are selected from feature libraries. Upon insertion, the system ensures that the feature does not contradict the design-for-manufacture rules. This helps eliminating costly manufacturing problems. The system is developed as an extension to a commercial CAD/CAM system Pro/Engineer.

  7. A new technology for manufacturing scheduling derived from space system operations

    NASA Technical Reports Server (NTRS)

    Hornstein, R. S.; Willoughby, J. K.

    1993-01-01

    A new technology for producing finite capacity schedules has been developed in response to complex requirements for operating space systems such as the Space Shuttle, the Space Station, and the Deep Space Network for telecommunications. This technology has proven its effectiveness in manufacturing environments where popular scheduling techniques associated with Materials Resources Planning (MRPII) and with factory simulation are not adequate for shop-floor work planning and control. The technology has three components. The first is a set of data structures that accommodate an extremely general description of a factory's resources, its manufacturing activities, and the constraints imposed by the environment. The second component is a language and set of software utilities that enable a rapid synthesis of functional capabilities. The third component is an algorithmic architecture called the Five Ruleset Model which accommodates the unique needs of each factory. Using the new technology, systems can model activities that generate, consume, and/or obligate resources. This allows work-in-process (WIP) to be generated and used; it permits constraints to be imposed or intermediate as well as finished goods inventories. It is also possible to match as closely as possible both the current factory state and future conditions such as promise dates. Schedule revisions can be accommodated without impacting the entire production schedule. Applications have been successful in both discrete and process manufacturing environments. The availability of a high-quality finite capacity production planning capability enhances the data management capabilities of MRP II systems. These schedules can be integrated with shop-floor data collection systems and accounting systems. Using the new technology, semi-custom systems can be developed at costs that are comparable to products that do not have equivalent functional capabilities and/or extensibility.

  8. PDS4 - Some Principles for Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Algermissen, S.; Padams, J.

    2015-12-01

    PDS4, a research data management and curation system for NASA's Planetary Science Archive, was developed using principles that promote the characteristics of agile development. The result is an efficient system that produces better research data products while using less resources (time, effort, and money) and maximizes their usefulness for current and future scientists. The key principle is architectural. The PDS4 information architecture is developed and maintained independent of the infrastructure's process, application and technology architectures. The information architecture is based on an ontology-based information model developed to leverage best practices from standard reference models for digital archives, digital object registries, and metadata registries and capture domain knowledge from a panel of planetary science domain experts. The information model provides a sharable, stable, and formal set of information requirements for the system and is the primary source for information to configure most system components, including the product registry, search engine, validation and display tools, and production pipelines. Multi-level governance is also allowed for the effective management of the informational elements at the common, discipline, and project level. This presentation will describe the development principles, components, and uses of the information model and how an information model-driven architecture exhibits characteristics of agile curation including early delivery, evolutionary development, adaptive planning, continuous improvement, and rapid and flexible response to change.

  9. Manufacturing technology development of the Powergrid{trademark} linear focus photovoltaic concentrator system

    SciTech Connect

    Kaminar, N.; Alexander, T.; Amaya, J.; Bottenberg, W.; Carrie, P.; Chen, K.; Gilbert, D.; Guzman, P.; Hobden, P.; Ross, J.; Sahagian, J.; Rodrigues, D.; Zimmermann, J.

    1999-03-01

    This article reports manufacturing technology improvements developed for the production of the PVI Powergrid{trademark} linear focus photovoltaic concentrator as part of a PVMaT project. The improvements include the development of an advanced, acrylic plastic extrusion system for Fresnel lenses, an automated receiver station, an EVA encapsulation process, an improved collector fabrication method and a lower cost panel frame. These project improvements have prepared PVI for entrance into large-scale production of PV power generation systems. {copyright} {ital 1999 American Institute of Physics.}

  10. Markovian timed Petri nets for performance analysis of semiconductor manufacturing systems.

    PubMed

    Jeng, M; Xie, X; Hung, W

    2000-01-01

    A subclass of generalized stochastic Petri nets (GSPNs) with priorities, called Markovian timed Petri nets, are proposed to model semiconductor manufacturing systems that consider process priorities, routing priorities, resource re-entrance, and nonpreemptive operations. Uniformization technique is used to establish both lower and upper bounds of the performance of interest. These bounds are computable using linear programming. Numerical experiments have been conducted to evaluate the accuracy of the bounds using models adapted from real-world systems. The experiments show that the upper bounds are very close to the simulation results. Thus, performance measures can be accurately estimated using these bounds.

  11. Experience Of Implementing The Integrated Management System In Manufacturing Companies In Slovakia

    NASA Astrophysics Data System (ADS)

    Lestyánszka Škůrková, Katarína; Kučerová, Marta; Fidlerová, Helena

    2015-06-01

    In corporate practice, the term of Integrated Management System means a system the aim of which is to manage an organization regarding the quality, environment, health and safety at work. In the first phase of the VEGA project No. 1/0448/13 "Transformation of ergonomics program into the company management structure through interaction and utilization QMS, EMS, HSMS", we focused on obtaining information about the way or procedure of implementing the integrated management systems in manufacturing companies in Slovakia. The paper considers characteristics of integrated management system, specifies the possibilities for successive integration of the management systems and also describes the essential aspects of the practical implementation of integrated management systems in companies in Slovakia.

  12. Development of telemetry for the agility flight test of a radio controlled fighter model

    NASA Astrophysics Data System (ADS)

    Gallagher, Michael J.

    1992-03-01

    Advanced design tools, control devices, and supermaneuverability concepts provide innovative solutions to traditional aircraft design trade-offs. Emerging technologies enable improved agility throughout the performance envelope. Unmanned Air Vehicles provide an excellent platform for dynamic measurements and agility research. A 1/8-scaled F-16A ducted-fan radio-controlled aircraft was instrumented with a telemetry system to acquire angle of attack, sideslip angle, control surface deflection, throttle position, and airspeed data. A portable ground station was built to record and visually present real-time telemetry data. Flight tests will be conducted to acquire baseline high angle-of-attack performance measurements, and follow-on research will evaluate agility improvements with varied control configurations.

  13. Towards an Understanding of the Conceptual Underpinnings of Agile Development Methodologies

    NASA Astrophysics Data System (ADS)

    Nerur, Sridhar; Cannon, Alan; Balijepally, Venugopal; Bond, Philip

    While the growing popularity of agile development methodologies is undeniable, there has been little systematic exploration of its intellectual foundation. Such an effort would be an important first step in understanding this paradigm's underlying premises. This understanding, in turn, would be invaluable in our assessment of current practices as well as in our efforts to advance the field of software engineering. Drawing on a variety of sources, both within and outside the discipline, we argue that the concepts underpinning agile development methodologies are by no means novel. In the tradition of General Systems Theory this paper advocates a transdisciplinary examination of agile development methodologies to extend the intellectual boundaries of software development. This is particularly important as the field moves beyond instrumental processes aimed at satisfying mere technical considerations.

  14. Automated design synthesis of robotic/human workcells for improved manufacturing system design in hazardous environments

    SciTech Connect

    Williams, Joshua M.

    2012-06-12

    Manufacturing tasks that are deemed too hazardous for workers require the use of automation, robotics, and/or other remote handling tools. The associated hazards may be radiological or nonradiological, and based on the characteristics of the environment and processing, a design may necessitate robotic labor, human labor, or both. There are also other factors such as cost, ergonomics, maintenance, and efficiency that also effect task allocation and other design choices. Handling the tradeoffs of these factors can be complex, and lack of experience can be an issue when trying to determine if and what feasible automation/robotics options exist. To address this problem, we utilize common engineering design approaches adapted more for manufacturing system design in hazardous environments. We limit our scope to the conceptual and embodiment design stages, specifically a computational algorithm for concept generation and early design evaluation. In regard to concept generation, we first develop the functional model or function structure for the process, using the common 'verb-noun' format for describing function. A common language or functional basis for manufacturing was developed and utilized to formalize function descriptions and guide rules for function decomposition. Potential components for embodiment are also grouped in terms of this functional language and are stored in a database. The properties of each component are given as quantitative and qualitative criteria. Operators are also rated for task-relevant criteria which are used to address task compatibility. Through the gathering of process requirements/constraints, construction of the component database, and development of the manufacturing basis and rule set, design knowledge is stored and available for computer use. Thus, once the higher level process functions are defined, the computer can automate the synthesis of new design concepts through alternating steps of embodiment and function structure updates

  15. A hybrid algorithm optimization approach for machine loading problem in flexible manufacturing system

    NASA Astrophysics Data System (ADS)

    Kumar, Vijay M.; Murthy, ANN; Chandrashekara, K.

    2012-05-01

    The production planning problem of flexible manufacturing system (FMS) concerns with decisions that have to be made before an FMS begins to produce parts according to a given production plan during an upcoming planning horizon. The main aspect of production planning deals with machine loading problem in which selection of a subset of jobs to be manufactured and assignment of their operations to the relevant machines are made. Such problems are not only combinatorial optimization problems, but also happen to be non-deterministic polynomial-time-hard, making it difficult to obtain satisfactory solutions using traditional optimization techniques. In this paper, an attempt has been made to address the machine loading problem with objectives of minimization of system unbalance and maximization of throughput simultaneously while satisfying the system constraints related to available machining time and tool slot designing and using a meta-hybrid heuristic technique based on genetic algorithm and particle swarm optimization. The results reported in this paper demonstrate the model efficiency and examine the performance of the system with respect to measures such as throughput and system utilization.

  16. The baculovirus expression vector system: A commercial manufacturing platform for viral vaccines and gene therapy vectors.

    PubMed

    Felberbaum, Rachael S

    2015-05-01

    The baculovirus expression vector system (BEVS) platform has become an established manufacturing platform for the production of viral vaccines and gene therapy vectors. Nine BEVS-derived products have been approved - four for human use (Cervarix(®), Provenge(®), Glybera(®) and Flublok(®)) and five for veterinary use (Porcilis(®) Pesti, BAYOVAC CSF E2(®), Circumvent(®) PCV, Ingelvac CircoFLEX(®) and Porcilis(®) PCV). The BEVS platform offers many advantages, including manufacturing speed, flexible product design, inherent safety and scalability. This combination of features and product approvals has previously attracted interest from academic researchers, and more recently from industry leaders, to utilize BEVS to develop next generation vaccines, vectors for gene therapy, and other biopharmaceutical complex proteins. In this review, we explore the BEVS platform, detailing how it works, platform features and limitations and important considerations for manufacturing and regulatory approval. To underscore the growth in opportunities for BEVS-derived products, we discuss the latest product developments in the gene therapy and influenza vaccine fields that follow in the wake of the recent product approvals of Glybera(®) and Flublok(®), respectively. We anticipate that the utility of the platform will expand even further as new BEVS-derived products attain licensure. Finally, we touch on some of the areas where new BEVS-derived products are likely to emerge.

  17. Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems

    SciTech Connect

    Weimar, Mark R.; Chick, Lawrence A.; Gotthold, David W.; Whyatt, Greg A.

    2013-09-30

    Solid oxide fuel cell (SOFC) power systems can be designed to produce electricity from fossil fuels at extremely high net efficiencies, approaching 70%. However, in order to penetrate commercial markets to an extent that significantly impacts world fuel consumption, their cost will need to be competitive with alternative generating systems, such as gas turbines. This report discusses a cost model developed at PNNL to estimate the manufacturing cost of SOFC power systems sized for ground-based distributed generation. The power system design was developed at PNNL in a study on the feasibility of using SOFC power systems on more electric aircraft to replace the main engine-mounted electrical generators [Whyatt and Chick, 2012]. We chose to study that design because the projected efficiency was high (70%) and the generating capacity was suitable for ground-based distributed generation (270 kW).

  18. America's Next Great Ship: Space Launch System Core Stage Transitioning from Design to Manufacturing

    NASA Technical Reports Server (NTRS)

    Birkenstock, Benjamin; Kauer, Roy

    2014-01-01

    The Space Launch System (SLS) Program is essential to achieving the Nation's and NASA's goal of human exploration and scientific investigation of the solar system. As a multi-element program with emphasis on safety, affordability, and sustainability, SLS is becoming America's next great ship of exploration. The SLS Core Stage includes avionics, main propulsion system, pressure vessels, thrust vector control, and structures. Boeing manufactures and assembles the SLS core stage at the Michoud Assembly Facility (MAF) in New Orleans, LA, a historical production center for Saturn V and Space Shuttle programs. As the transition from design to manufacturing progresses, the importance of a well-executed manufacturing, assembly, and operation (MA&O) plan is crucial to meeting performance objectives. Boeing employs classic techniques such as critical path analysis and facility requirements definition as well as innovative approaches such as Constraint Based Scheduling (CBS) and Cirtical Chain Project Management (CCPM) theory to provide a comprehensive suite of project management tools to manage the health of the baseline plan on both a macro (overall project) and micro level (factory areas). These tools coordinate data from multiple business systems and provide a robust network to support Material & Capacity Requirements Planning (MRP/CRP) and priorities. Coupled with these tools and a highly skilled workforce, Boeing is orchestrating the parallel buildup of five major sub assemblies throughout the factory. Boeing and NASA are transforming MAF to host state of the art processes, equipment and tooling, the most prominent of which is the Vertical Assembly Center (VAC), the largest weld tool in the world. In concert, a global supply chain is delivering a range of structural elements and component parts necessary to enable an on-time delivery of the integrated Core Stage. SLS is on plan to launch humanity into the next phase of space exploration.

  19. Low cost method for manufacturing a data acquisition system with USB connectivity

    NASA Astrophysics Data System (ADS)

    Niculescu, V.; Dobre, R. A.; Popovici, E.

    2016-06-01

    In the process of designing and manufacturing an electronic system the digital oscilloscope plays an essential role but it also represents one of the most expensive equipment present on the typical workbench. In order to make electronic design more accessible to students and hobbyists, an affordable data acquisition system was imagined. The paper extensively presents the development and testing of a low cost, medium speed, data acquisition system which can be used in a wide range of electronic measurement and debugging applications, assuring also great portability due to the small physical dimensions. Each hardware functional block and is thoroughly described, highlighting the challenges that occurred as well as the solutions to overcome them. The entire system was successfully manufactured using high quality components to assure increased reliability, and high frequency PCB materials and techniques were preferred. The measured values determined based on test signals were compared to the ones obtained using a digital oscilloscope available on the market and differences less than 1% were observed.

  20. Autonomous Guidance of Agile Small-scale Rotorcraft

    NASA Technical Reports Server (NTRS)

    Mettler, Bernard; Feron, Eric

    2004-01-01

    This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

  1. ScreenRecorder: A Utility for Creating Screenshot Video Using Only Original Equipment Manufacturer (OEM) Software on Microsoft Windows Systems

    DTIC Science & Technology

    2015-01-01

    ScreenRecorder: A Utility for Creating Screenshot Video Using Only Original Equipment Manufacturer (OEM) Software on Microsoft Windows Systems...Ground, MD 21005-5069 ARL-TN-0658 January 2015 ScreenRecorder: A Utility for Creating Screenshot Video Using Only Original Equipment...ScreenRecorder: A Utility for Creating Screenshot Video Using Only Original Equipment Manufacturer (OEM) Software on Microsoft Windows Systems 5a

  2. Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1

    SciTech Connect

    1995-09-22

    This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided.

  3. Fault detection and isolation in manufacturing systems with an identified discrete event model

    NASA Astrophysics Data System (ADS)

    Roth, Matthias; Schneider, Stefan; Lesage, Jean-Jacques; Litz, Lothar

    2012-10-01

    In this article a generic method for fault detection and isolation (FDI) in manufacturing systems considered as discrete event systems (DES) is presented. The method uses an identified model of the closed-loop of plant and controller built on the basis of observed fault-free system behaviour. An identification algorithm known from literature is used to determine the fault detection model in form of a non-deterministic automaton. New results of how to parameterise this algorithm are reported. To assess the fault detection capability of an identified automaton, probabilistic measures are proposed. For fault isolation, the concept of residuals adapted for DES is used by defining appropriate set operations representing generic fault symptoms. The method is applied to a case study system.

  4. Design and specification of a centralized manufacturing data management and scheduling system

    NASA Technical Reports Server (NTRS)

    Farrington, Phillip A.

    1993-01-01

    As was revealed in a previous study, the Materials and Processes Laboratory's Productivity Enhancement Complex (PEC) has a number of automated production areas/cells that are not effectively integrated, limiting the ability of users to readily share data. The recent decision to utilize the PEC for the fabrication of flight hardware has focused new attention on the problem and brought to light the need for an integrated data management and scheduling system. This report addresses this need by developing preliminary designs specifications for a centralized manufacturing data management and scheduling system for managing flight hardware fabrication in the PEC. This prototype system will be developed under the auspices of the Integrated Engineering Environment (IEE) Oversight team and the IEE Committee. At their recommendation the system specifications were based on the fabrication requirements of the AXAF-S Optical Bench.

  5. Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture

    DOEpatents

    Steele, Kerry D [Kennewick, WA; Anderson, Gordon A [Benton City, WA; Gilbert, Ronald W [Morgan Hill, CA

    2011-02-01

    Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture are described. In one aspect, a communications device identification method includes providing identification information regarding a group of wireless identification devices within a wireless communications range of a reader, using the provided identification information, selecting one of a plurality of different search procedures for identifying unidentified ones of the wireless identification devices within the wireless communications range, and identifying at least some of the unidentified ones of the wireless identification devices using the selected one of the search procedures.

  6. Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture

    DOEpatents

    McCown, Steven H [Rigby, ID; Derr, Kurt W [Idaho Falls, ID; Rohde, Kenneth W [Idaho Falls, ID

    2012-05-08

    Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

  7. Vertical transportation systems embedded on shuffled frog leaping algorithm for manufacturing optimisation problems in industries.

    PubMed

    Aungkulanon, Pasura; Luangpaiboon, Pongchanun

    2016-01-01

    Response surface methods via the first or second order models are important in manufacturing processes. This study, however, proposes different structured mechanisms of the vertical transportation systems or VTS embedded on a shuffled frog leaping-based approach. There are three VTS scenarios, a motion reaching a normal operating velocity, and both reaching and not reaching transitional motion. These variants were performed to simultaneously inspect multiple responses affected by machining parameters in multi-pass turning processes. The numerical results of two machining optimisation problems demonstrated the high performance measures of the proposed methods, when compared to other optimisation algorithms for an actual deep cut design.

  8. A Proposal of Operational Risk Management Method Using FMEA for Drug Manufacturing Computerized System

    NASA Astrophysics Data System (ADS)

    Takahashi, Masakazu; Nanba, Reiji; Fukue, Yoshinori

    This paper proposes operational Risk Management (RM) method using Failure Mode and Effects Analysis (FMEA) for drug manufacturing computerlized system (DMCS). The quality of drug must not be influenced by failures and operational mistakes of DMCS. To avoid such situation, DMCS has to be conducted enough risk assessment and taken precautions. We propose operational RM method using FMEA for DMCS. To propose the method, we gathered and compared the FMEA results of DMCS, and develop a list that contains failure modes, failures and countermeasures. To apply this list, we can conduct RM in design phase, find failures, and conduct countermeasures efficiently. Additionally, we can find some failures that have not been found yet.

  9. PCD-tipped cutting tool systems for best-in-class manufacturing

    SciTech Connect

    Erdel, B.P.

    1995-12-31

    To meet the stringent demands on today`s manufacturing, cutting tool systems had to be developed with innovative design features built-in. In nearly all applications involving non-ferrous metals, these cutting tools are diamond tipped. They dramatically outperform any other {open_quotes}conventional{close_quotes} or substitute cutting material. They can be run up to 50% faster than carbide grades and simultaneously even extend tool life up to 10-fold while improved workpiece quality, increased productivity and reduced production costs are just a bonus.

  10. Development of frequency-agile high-repetition-rate CO{sub 2} DIAL systems for long range chemical remote sensing

    SciTech Connect

    Quick, C.R. Jr.; Fite, C.B.; Foy, B.R.; Jolin, J.; Mietz, D.E.

    1997-11-01

    Issues related to the development of direct detection, long-range CO{sub 2} DIAL systems for chemical detection and identification are presented and discussed including: data handling and display techniques for large, multi-{lambda} data sets, turbulence effects, slant path propagation, and speckle averaging. Data examples from various field campaigns and CO{sub 2} lidar platforms are used to illustrate the issues.

  11. Fall 2014 SEI Research Review Applying Agile Methods to DoD

    DTIC Science & Technology

    2014-10-28

    2014 © 2014 Carnegie Mellon University Agile Defense Adoption Proponents Team (ADAPT) member E-Learning Agile Course Multiple Presentations ... presentations , program committees: GSAW 2014, Agile 2014, Contracts in Agile International Meeting, AFEI/SEI DoD Agile Summit, GAO Working Groups 8

  12. XP Workshop on Agile Product Line Engineering

    NASA Astrophysics Data System (ADS)

    Ghanam, Yaser; Cooper, Kendra; Abrahamsson, Pekka; Maurer, Frank

    Software Product Line Engineering (SPLE) promises to lower the costs of developing individual applications as they heavily reuse existing artifacts. Besides decreasing costs, software reuse achieves faster development and higher quality. Traditionally, SPLE favors big design upfront and employs traditional, heavy weight processes. On the other hand, agile methods have been proposed to rapidly develop high quality software by focusing on producing working code while reducing upfront analysis and design. Combining both paradigms, although is challenging, can yield significant improvements.

  13. Compact, Automated, Frequency-Agile Microspectrofluorimeter

    NASA Technical Reports Server (NTRS)

    Fernandez, Salvador M.; Guignon, Ernest F.

    1995-01-01

    Compact, reliable, rugged, automated cell-culture and frequency-agile microspectrofluorimetric apparatus developed to perform experiments involving photometric imaging observations of single live cells. In original application, apparatus operates mostly unattended aboard spacecraft; potential terrestrial applications include automated or semiautomated diagnosis of pathological tissues in clinical laboratories, biomedical instrumentation, monitoring of biological process streams, and portable instrumentation for testing biological conditions in various environments. Offers obvious advantages over present laboratory instrumentation.

  14. Motion/posture modeling and simulation verification of physically handicapped in manufacturing system design

    NASA Astrophysics Data System (ADS)

    Fu, Yan; Li, Shiqi; Chen, Gwen-guo

    2013-03-01

    Non-obstacle design is critical to tailor physically handicapped workers in manufacturing system. Simultaneous consideration of variability in physically disabled users, machines and environment of the manufacturing system is extremely complex and generally requires modeling of physically handicapped interaction with the system. Most current modeling either concentrates on the task results or functional disability. The integration of physical constraints with task constraints is far more complex because of functional disability and its extended influence on adjacent body parts. A framework is proposed to integrate the two constraints and thus model the specific behavior of the physical handicapped in virtual environment generated by product specifications. Within the framework a simplified model of physical disabled body is constructed, and body motion is generated based on 3 levels of constraints(effecter constraints, kinematics constraints and physical constraints). The kinematics and dynamic calculations are made and optimized based on the weighting manipulated by the kinematics constraints and dynamic constraints. With object transferring task as example, the model is validated in Jack 6.0. Modelled task motion elements except for squatting and overreaching well matched with captured motion elements. The proposed modeling method can model the complex behavior of the physically handicapped by integrating both task and physical disability constraints.

  15. [Research on multi-agent based modeling and simulation of hospital system].

    PubMed

    Zhao, Junping; Yang, Hongqiao; Guo, Huayuan; Li, Yi; Zhang, Zhenjiang; Li, Shuzhang

    2010-12-01

    In this paper, the theory of complex adaptive system (CAS) and its modeling method are introduced. The complex characters of the hospital system is analyzed. The agile manufacturing and cell reconstruction technologies are used to reconstruct the hospital system. Then we set forth a research for simulation of hospital system based on the methodology of Multi-Agent technology and high level architecture (HLA). Finally, a simulation framework based on HLA for hospital system is presented.

  16. Information Models, Data Requirements, and Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, John S.; Crichton, Dan; Ritschel, Bernd; Hardman, Sean; Joyner, Ron

    2015-04-01

    The Planetary Data System's next generation system, PDS4, is an example of the successful use of an ontology-based Information Model (IM) to drive the development and operations of a data system. In traditional systems engineering, requirements or statements about what is necessary for the system are collected and analyzed for input into the design stage of systems development. With the advent of big data the requirements associated with data have begun to dominate and an ontology-based information model can be used to provide a formalized and rigorous set of data requirements. These requirements address not only the usual issues of data quantity, quality, and disposition but also data representation, integrity, provenance, context, and semantics. In addition the use of these data requirements during system's development has many characteristics of Agile Curation as proposed by Young et al. [Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community, AGU 2014], namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. For example customers can be satisfied through early and continuous delivery of system software and services that are configured directly from the information model. This presentation will describe the PDS4 architecture and its three principle parts: the ontology-based Information Model (IM), the federated registries and repositories, and the REST-based service layer for search, retrieval, and distribution. The development of the IM will be highlighted with special emphasis on knowledge acquisition, the impact of the IM on development and operations, and the use of shared ontologies at multiple governance levels to promote system interoperability and data correlation.

  17. The design of the automated control system for warehouse equipment under radio-electronic manufacturing

    NASA Astrophysics Data System (ADS)

    Kapulin, D. V.; Chemidov, I. V.; Kazantsev, M. A.

    2017-01-01

    In the paper, the aspects of design, development and implementation of the automated control system for warehousing under the manufacturing process of the radio-electronic enterprise JSC «Radiosvyaz» are discussed. The architecture of the automated control system for warehousing proposed in the paper consists of a server which is connected to the physically separated information networks: the network with a database server, which stores information about the orders for picking, and the network with the automated storage and retrieval system. This principle allows implementing the requirements for differentiation of access, ensuring the information safety and security requirements. Also, the efficiency of the developed automated solutions in terms of optimizing the warehouse’s logistic characteristics is researched.

  18. Inter-Enterprise Planning of Manufacturing Systems Applying Simulation with IPR Protection

    NASA Astrophysics Data System (ADS)

    Mertins, Kai; Rabe, Markus

    Discrete Event Simulation is a well-proved method to analyse the dynamic behaviour of manufacturing systems. However, simulation application is still poor for external supply chains or virtual enterprises, encompassing several legal entities. Most conventional simulation systems provide no means to protect intellectual property rights (IPR), nor methods to support cross-enterprise teamwork. This paper describes a solution to keep enterprise models private, but still provide their functionality for cross-enterprise evaluation purposes. Applying the new modelling system, the inter-enterprise business process is specified by the user, including a specification of the objects exchanged between the local models. The required environment for a distributed simulation is generated automatically. The mechanisms have been tested with a large supply chain model.

  19. Frequency-agile microwave components using ferroelectric materials

    NASA Astrophysics Data System (ADS)

    Colom-Ustariz, Jose G.; Rodriguez-Solis, Rafael; Velez, Salmir; Rodriguez-Acosta, Snaider

    2003-04-01

    The non-linear electric field dependence of ferroelectric thin films can be used to design frequency and phase agile components. Tunable components have traditionally been developed using mechanically tuned resonant structures, ferrite components, or semiconductor-based voltage controlled electronics, but they are limited by their frequency performance, high cost, hgih losses, and integration into larger systems. In contrast, the ferroelectric-based tunable microwave component can easily be integrated into conventional microstrip circuits and attributes such as small size, light weight, and low-loss make these components attractive for broadband and multi-frequency applications. Components that are essential elements in the design of a microwave sensor can be fabricated with ferroelectric materials to achieve tunability over a broad frequency range. It has been reported that with a thin ferroelectric film placed between the top conductor layer and the dielectric material of a microstrip structure, and the proper DC bias scheme, tunable components above the Ku band can be fabricated. Components such as phase shifters, coupled line filters, and Lange couplers have been reported in the literature using this technique. In this wokr, simulated results from a full wave electromagnetic simulator are obtained to show the tunability of a matching netowrk typically used in the design of microwave amplifiers and antennas. In addition, simulated results of a multilayer Lange coupler, and a patch antenna are also presented. The results show that typical microstrip structures can be easily modified to provide frequency agile capabilities.

  20. Candidate control design metrics for an agile fighter

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

    1991-01-01

    Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

  1. Evaluation of SHM System Produced by Additive Manufacturing via Acoustic Emission and Other NDT Methods

    PubMed Central

    Strantza, Maria; Aggelis, Dimitrios G.; de Baere, Dieter; Guillaume, Patrick; van Hemelrijck, Danny

    2015-01-01

    During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called “effective structural health monitoring” (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life safety and reduce direct operative costs. It operates based on a network of capillaries that are integrated into an AM structure. The internal pressure of the capillaries is continuously monitored by a pressure sensor. When a crack nucleates and reaches the capillary, the internal pressure changes signifying the existence of the flaw. The main objective of this paper is to evaluate the crack detection capacity of the eSHM system and crack location accuracy by means of various non-destructive testing (NDT) techniques. During this study, detailed acoustic emission (AE) analysis was applied in AM materials for the first time in order to investigate if phenomena like the Kaiser effect and waveform parameters used in conventional metals can offer valuable insight into the damage accumulation of the AM structure as well. Liquid penetrant inspection, eddy current and radiography were also used in order to confirm the fatigue damage and indicate the damage location on un-notched four-point bending AM metallic specimens with an integrated eSHM system. It is shown that the eSHM system in combination with NDT can provide correct information on the damage condition of additive manufactured metals. PMID:26506349

  2. Evaluation of SHM system produced by additive manufacturing via acoustic emission and other NDT methods.

    PubMed

    Strantza, Maria; Aggelis, Dimitrios G; de Baere, Dieter; Guillaume, Patrick; van Hemelrijck, Danny

    2015-10-21

    During the last decades, structural health monitoring (SHM) systems are used in order to detect damage in structures. We have developed a novel structural health monitoring approach, the so-called "effective structural health monitoring" (eSHM) system. The current SHM system is incorporated into a metallic structure by means of additive manufacturing (AM) and has the possibility to advance life safety and reduce direct operative costs. It operates based on a network of capillaries that are integrated into an AM structure. The internal pressure of the capillaries is continuously monitored by a pressure sensor. When a crack nucleates and reaches the capillary, the internal pressure changes signifying the existence of the flaw. The main objective of this paper is to evaluate the crack detection capacity of the eSHM system and crack location accuracy by means of various non-destructive testing (NDT) techniques. During this study, detailed acoustic emission (AE) analysis was applied in AM materials for the first time in order to investigate if phenomena like the Kaiser effect and waveform parameters used in conventional metals can offer valuable insight into the damage accumulation of the AM structure as well. Liquid penetrant inspection, eddy current and radiography were also used in order to confirm the fatigue damage and indicate the damage location on un-notched four-point bending AM metallic specimens with an integrated eSHM system. It is shown that the eSHM system in combination with NDT can provide correct information on the damage condition of additive manufactured metals.

  3. Rolling and tumbling: status of the SuperAGILE experiment

    NASA Astrophysics Data System (ADS)

    Del Monte, E.; Costa, E.; di Persio, G.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Mastropietro, M.; Morelli, E.; Pacciani, L.; Rapisarda, M.; Rubini, A.; Soffitta, P.; Tavani, M.; Argan, A.; Trois, A.

    2010-07-01

    The SuperAGILE experiment is the hard X-ray monitor of the AGILE mission. It is a 2 x one-dimensional imager, with 6-arcmin angular resolution in the energy range 18 - 60 keV and a field of view in excess of 1 steradian. SuperAGILE is successfully operating in orbit since Summer 2007, providing long-term monitoring of bright sources and prompt detection and localization of gamma-ray bursts. Starting on October 2009 the AGILE mission lost its reaction wheel and the satellite attitude is no longer stabilized. The current mode of operation of the AGILE satellite is a Spinning Mode, around the Sun-pointing direction, with an angular velocity of about 0.8 degree/s (corresponding to 8 times the SuperAGILE point spread function every second). In these new conditions, SuperAGILE continuously scans a much larger fraction of the sky, with much smaller exposure to each region. In this paper we review some of the results of the first 2.5 years of "standard" operation of SuperAGILE, and show how new implementations in the data analysis software allows to continue the hard X-ray sky monitoring by SuperAGILE also in the new attitude conditions.

  4. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  5. In-Space Manufacturing: Pioneering a Sustainable Path to Mars

    NASA Technical Reports Server (NTRS)

    Werkheiser, Niki

    2015-01-01

    In order to provide meaningful impacts to exploration technology needs, the In-Space Manufacturing (ISM) Initiative must influence exploration systems design now. In-space manufacturing offers: dramatic paradigm shift in the development and creation of space architectures; efficiency gain and risk reduction for low Earth orbit and deep space exploration; and "pioneering" approach to maintenance, repair, and logistics leading to sustainable, affordable supply chain model. In order to develop application-based capabilities in time to support NASA budget and schedule, ISM must be able to leverage the significant commercial developments, which requires innovative, agile collaborative mechanisms (contracts, challenges, SBIR's, etc.); and NASA-unique investments to focus primarily on adapting the technologies and processes to the microgravity environment. We must do the foundational work - it is the critical path for taking these technologies from lab curiosities to institutionalized capabilities: characterize, certify, institutionalize, design for Additive Manufacturing (AM). Ideally, International Space Station (ISS) U.S. lab rack or partial rack space should be identified for in-space manufacturing utilization in order to continue technology development of a suite of capabilities required for exploration missions, as well as commercialization on ISS.

  6. Best Manufacturing Practices: Report of Survey Conducted at UNISYS corporation Computer Systems Division, St. Paul, Minnesota

    DTIC Science & Technology

    1987-11-01

    test sequence. Just In Time Manufacturing Just In Time (JIT) manufacturing has been implemented at the UNISYS CSD site in Pueblo, CO. The Pueblo...inspection, staging, and distribution is performed in a highly automated "paperless" environment. Additionally, Just In Time manufacturing concepts have

  7. 21 CFR 821.25 - Device tracking system and content requirements: manufacturer requirements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... manufacturer of a tracked device shall keep current records in accordance with its standard operating procedure... this section. A manufacturer shall make this standard operating procedure available to FDA upon request. A manufacturer shall incorporate the following into the standard operating procedure: (1)...

  8. 21 CFR 821.25 - Device tracking system and content requirements: manufacturer requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... manufacturer of a tracked device shall keep current records in accordance with its standard operating procedure... this section. A manufacturer shall make this standard operating procedure available to FDA upon request. A manufacturer shall incorporate the following into the standard operating procedure: (1)...

  9. A Petri Net Approach Based Elementary Siphons Supervisor for Flexible Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Abdul-Hussin, Mowafak Hassan

    2015-05-01

    This paper presents an approach to constructing a class of an S3PR net for modeling, simulation and control of processes occurring in the flexible manufacturing system (FMS) used based elementary siphons of a Petri net. Siphons are very important to the analysis and control of deadlocks of FMS that is significant objectives of siphons. Petri net models in the efficiency structure analysis, and utilization of the FMSs when different policy can be implemented lead to the deadlock prevention. We are representing an effective deadlock-free policy of a special class of Petri nets called S3PR. Simulation of Petri net structural analysis and reachability graph analysis is used for analysis and control of Petri nets. Petri nets contain been successfully as one of the most powerful tools for modelling of FMS, where Using structural analysis, we show that liveness of such systems can be attributed to the absence of under marked siphons.

  10. A Black-Scholes Approach to Satisfying the Demand in a Failure-Prone Manufacturing System

    NASA Technical Reports Server (NTRS)

    Chavez-Fuentes, Jorge R.; Gonzalex, Oscar R.; Gray, W. Steven

    2007-01-01

    The goal of this paper is to use a financial model and a hedging strategy in a systems application. In particular, the classical Black-Scholes model, which was developed in 1973 to find the fair price of a financial contract, is adapted to satisfy an uncertain demand in a manufacturing system when one of two production machines is unreliable. This financial model together with a hedging strategy are used to develop a closed formula for the production strategies of each machine. The strategy guarantees that the uncertain demand will be met in probability at the final time of the production process. It is assumed that the production efficiency of the unreliable machine can be modeled as a continuous-time stochastic process. Two simple examples illustrate the result.

  11. Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications

    SciTech Connect

    Ulsh, M.; Wheeler, D.; Protopappas, P.

    2011-08-01

    The U.S. Department of Energy (DOE) is interested in supporting manufacturing research and development (R&D) for fuel cell systems in the 10-1,000 kilowatt (kW) power range relevant to stationary and distributed combined heat and power applications, with the intent to reduce manufacturing costs and increase production throughput. To assist in future decision-making, DOE requested that the National Renewable Energy Laboratory (NREL) provide a baseline understanding of the current levels of adoption of automation in manufacturing processes and flow, as well as of continuous processes. NREL identified and visited or interviewed key manufacturers, universities, and laboratories relevant to the study using a standard questionnaire. The questionnaire covered the current level of vertical integration, the importance of quality control developments for automation, the current level of automation and source of automation design, critical balance of plant issues, potential for continuous cell manufacturing, key manufacturing steps or processes that would benefit from DOE support for manufacturing R&D, the potential for cell or stack design changes to support automation, and the relationship between production volume and decisions on automation.

  12. Upgrading the steam and cooling systems at a machine tool manufacturing complex

    SciTech Connect

    Davies, G.R.; Drye, J.W.

    1997-03-01

    Cincinnati Milacron, Inc., one of the world`s largest machine tool manufacturers, decided to upgrade the steam and cooling systems that serve Milacron`s multibuilding 1.5 million square foot (139,350 m{sup 2}) headquarters complex in Cincinnati, Ohio. The upgrades were begun in 1993 and were operational by March 1995. Program objectives were to: (1) Provide mechanical cooling of manufacturing areas for better temperature control to gain closer tolerances on machined parts. This was to support a corporate objective to obtain ISO 9000 Certification which has been achieved. (2) Phase-out use of ozone-depleting chlorofluorocarbon (CFC) refrigerants in existing electric chillers and packaged air-conditioning (DX) units. (3) Minimize waste oil and wood leaving the complex to reduce disposal costs and environmental liabilities. (4) Reduce operating and maintenance costs to enhance industrial competitiveness. With co-funding help from the local utility company, Cinergy Corporation, the authors assisted Milacron in analyzing the feasibility of various mechanical cooling concepts such as single vs. two-stage steam absorption vs. electric chillers. This analysis provided the data needed to select the concepts which best met the program objectives.

  13. New policy to manage tools in flexible manufacturing systems using network part programs

    NASA Astrophysics Data System (ADS)

    Matta, Andrea; Tolio, Tullio; Grieco, Antonio; Nucci, Francesco

    2000-10-01

    The high investment related to the acquisition of Flexible Manufacturing Systems forces firms to a better utilization of the machines. Different actions can be taken in order to avoid idle times of the machines: reduction of the unproductive times (time dedicated to rapid movements, tool exchange, pallet exchange, etc.), improvement of machines and, not last, a better management of the resources. The paper proposes a new policy for the management of tool operations in parallel machine FMS to minimize the idle times due to the lack of tools. The proposed policy uses new opportunities in manufacturing technology related with the use of network part programs in NC machines. It is already known in literature the potentiality of network part programs, more flexible than traditional sequential part programs that execute simply the rigid list of operations. Network part programs allow the different alternative ways to process each part. The way in which network part programs are executed by machines depends on the state of the tools and availability of the tools. The proposed method has been compared with other existing ones based on a real test case, a parallel machine FMS with two machines and a tool carrier.

  14. The Preemptive Stocker Dispatching Rule of Automatic Material Handling System in 300 mm Semiconductor Manufacturing Factories

    NASA Astrophysics Data System (ADS)

    Wang, C. N.; Lin, H. S.; Hsu, H. P.; Wang, Yen-Hui; Chang, Y. P.

    2016-04-01

    The integrated circuit (IC) manufacturing industry is one of the biggest output industries in this century. The 300mm wafer fabs is the major fab size of this industry. The automatic material handling system (AMHS) has become one of the most concerned issues among semiconductor manufacturers. The major lot delivery of 300mm fabs is used overhead hoist transport (OHT). The traffic jams are happened frequently due to the wide variety of products and big amount of OHTs moving in the fabs. The purpose of this study is to enhance the delivery performance of automatic material handling and reduce the delay and waiting time of product transportation for both hot lots and normal lots. Therefore, this study proposes an effective OHT dispatching rule: preemptive stocker dispatching (PSD). Simulation experiments are conducted and one of the best differentiated preemptive rule, differentiated preemptive dispatching (DPD), is used for comparison. Compared with DPD, The results indicated that PSD rule can reduce average variable delivery time of normal lots by 13.15%, decreasing average variable delivery time of hot lots by 17.67%. Thus, the PSD rule can effectively reduce the delivery time and enhance productivity in 300 mm wafer fabs.

  15. A system model to integrate the “Green Manufacturing” concept in Romanian manufacturing organisation

    NASA Astrophysics Data System (ADS)

    Tilină, D. I.; Zapciu, M.; Mohora, C.

    2015-11-01

    In Romania, the large majorities of the manufacturing companies consume natural resources and energy in an unsustainable manner. Over the years, the emissions of greenhouse gases have led not only to many environmental problems but also to important social and economic problems. A real solution to help the Romanian manufacturing companies to adapt to the new legislative requirements is the green manufacturing implementation. Considering the current situation, the purpose of this paper is to present a model that will integrate the green manufacturing concept at the organizational level based on the practices identified in the Romanian manufacturing companies at the operational level in the context of sustainable development.

  16. Optimal management of reconfigurable manufacturing system modeling with Petri nets developed three-dimensional - RPD3D

    NASA Astrophysics Data System (ADS)

    Teodor, F.; Marinescu, V.; Epureanu, A.

    2016-11-01

    Modeling of reconfigurable manufacturing systems would have done using existing Petri net types, but the complexity and dynamics of the new manufacturing system, mainly data reconfiguration feature, required looking for a more compact representation with many variables that to model as accurately not only the normal operation of the production system but can capture and model and reconfiguration process. Thus, it was necessary to create a new class of Petri nets, called RPD3D (Developed Petri nets with three dimensional) showing the name of both lineage (new class derived from Petri nets developed, created in 2000 by Prof. Dr. Ing Vasile Marinescu in his doctoral thesis) [1], but the most important of the new features defining (transformation from one 2D model into a 3D model).The idea was to introduce the classical model of a Petri third dimension to be able to overlay multiple levels (layers) formed in 2D or 3D Petri nets that interact with each other (receiving or giving commands to enable or disable the various modules together simulating the operation of reconfigurable manufacturing systems). The aim is to present a new type of Petri nets called RPD3D - Developed Petri three-dimensional model used for optimal control and simulation of reconfigurable manufacturing systems manufacture of products such systems.

  17. Manufacturing microsystems-on-a-chip with 5-level surface micromachining technology

    SciTech Connect

    Sniegowski, J.; Rodgers, M.S.

    1998-05-01

    An agile microsystem manufacturing technology has been developed that provides unprecedented 5 levels of independent polysilicon surface-micromachine films for the designer. Typical surface-micromachining processes offer a maximum of 3 levels, making this the most complex surface-micromachining process technology developed to date. Leveraged from the extensive infrastructure present in the microelectronics industry, the manufacturing method of polysilicon surface-micromachining offers similar advantages of high-volume, high-reliability, and batch-fabrication to microelectromechanical systems (MEMS) as has been accomplished with integrated circuits (ICs). These systems, comprised of microscopic-sized mechanical elements, are laying the foundation for a rapidly expanding, multi-billion dollar industry 2 which impacts the automotive, consumer product, and medical industries to name only a few.

  18. Modeling and deadlock avoidance of automated manufacturing systems with multiple automated guided vehicles.

    PubMed

    Wu, Naiqi; Zhou, MengChu

    2005-12-01

    An automated manufacturing system (AMS) contains a number of versatile machines (or workstations), buffers, an automated material handling system (MHS), and is computer-controlled. An effective and flexible alternative for implementing MHS is to use automated guided vehicle (AGV) system. The deadlock issue in AMS is very important in its operation and has extensively been studied. The deadlock problems were separately treated for parts in production and transportation and many techniques were developed for each problem. However, such treatment does not take the advantage of the flexibility offered by multiple AGVs. In general, it is intractable to obtain maximally permissive control policy for either problem. Instead, this paper investigates these two problems in an integrated way. First we model an AGV system and part processing processes by resource-oriented Petri nets, respectively. Then the two models are integrated by using macro transitions. Based on the combined model, a novel control policy for deadlock avoidance is proposed. It is shown to be maximally permissive with computational complexity of O (n2) where n is the number of machines in AMS if the complexity for controlling the part transportation by AGVs is not considered. Thus, the complexity of deadlock avoidance for the whole system is bounded by the complexity in controlling the AGV system. An illustrative example shows its application and power.

  19. Dynamic tumor tracking using the Elekta Agility MLC

    SciTech Connect

    Fast, Martin F. Nill, Simeon Bedford, James L.; Oelfke, Uwe

    2014-11-01

    Purpose: To evaluate the performance of the Elekta Agility multileaf collimator (MLC) for dynamic real-time tumor tracking. Methods: The authors have developed a new control software which interfaces to the Agility MLC to dynamically program the movement of individual leaves, the dynamic leaf guides (DLGs), and the Y collimators (“jaws”) based on the actual target trajectory. A motion platform was used to perform dynamic tracking experiments with sinusoidal trajectories. The actual target positions reported by the motion platform at 20, 30, or 40 Hz were used as shift vectors for the MLC in beams-eye-view. The system latency of the MLC (i.e., the average latency comprising target device reporting latencies and MLC adjustment latency) and the geometric tracking accuracy were extracted from a sequence of MV portal images acquired during irradiation for the following treatment scenarios: leaf-only motion, jaw + leaf motion, and DLG + leaf motion. Results: The portal imager measurements indicated a clear dependence of the system latency on the target position reporting frequency. Deducting the effect of the target frequency, the leaf adjustment latency was measured to be 38 ± 3 ms for a maximum target speed v of 13 mm/s. The jaw + leaf adjustment latency was 53 ± 3 at a similar speed. The system latency at a target position frequency of 30 Hz was in the range of 56–61 ms for the leaves (v ≤ 31 mm/s), 71–78 ms for the jaw + leaf motion (v ≤ 25 mm/s), and 58–72 ms for the DLG + leaf motion (v ≤ 59 mm/s). The tracking accuracy showed a similar dependency on the target position frequency and the maximum target speed. For the leaves, the root-mean-squared error (RMSE) was between 0.6–1.5 mm depending on the maximum target speed. For the jaw + leaf (DLG + leaf) motion, the RMSE was between 0.7–1.5 mm (1.9–3.4 mm). Conclusions: The authors have measured the latency and geometric accuracy of the Agility MLC, facilitating its future use for clinical

  20. Agile informatics: application of agile project management to the development of a personal health application.

    PubMed

    Chung, Jeanhee; Pankey, Evan; Norris, Ryan J

    2007-10-11

    We describe the application of the Agile method-- a short iteration cycle, user responsive, measurable software development approach-- to the project management of a modular personal health record, iHealthSpace, to be deployed to the patients and providers of a large academic primary care practice.

  1. Advanced Manufacturing

    DTIC Science & Technology

    2002-01-01

    manufacturing will enable the mass customization of products and create new market opportunities in the commercial sector. Flexible manufacturing ...the mass customization of products and create new market opportunities in the commercial sector. One of the most promising flexible manufacturing ... manufacturing , increase efficiency and productivity. Research in leading edge technologies continues to promise exciting new manufacturing methods

  2. ASSET: a software tool for the evaluation of manoeuvre capabilities of highly agile satellites

    NASA Astrophysics Data System (ADS)

    Barschke, Merlin F.; Levenhagen, Jens; Reggio, Domenico; Roberts, Peter C. E.

    2014-03-01

    The new generation of agile earth observation satellites provides much higher observation capabilities than their non-agile predecessors. From a kinematic point of view, these capabilities result in more complex guidance laws for the spacecraft's attitude control system. The computation of these guidance laws is driven by a number of factors. For instance, the Earth's curved shape and its rotation in combination with the possible scan path geometries lead to a highly nonlinear relation between the motion of the satellite and the line-of-sight projection onto Earth. In this paper ASSET (Agile Satellites Scenario Evaluation Tool) is presented. ASSET is a modular MATLAB command line tool developed at Astrium GmbH, Germany, to asses the manoeuvre capabilities of agile satellites carrying time-delayed integration instruments. Each single scenario may consist of one or several ground scans, linked by suitable spacecraft slews. Once the entire scenario is defined, ASSET will analyse whether the kinematic and dynamic constraints of a specific satellite allow this scenario to be performed and will then generate the related guidance profile (angles and angular rates). The satellites' ground track, the projection of the instruments line-of-sight, and the projection of the instruments field of view onto the earth can be plotted for a visual inspection. ASSET can perform the analysis of scenarios with several different scan modes usually performed by this type of satellite.

  3. Additive Manufacturing Enabled Ubiquitous Sensing in Aerospace and Integrated Building Systems

    NASA Astrophysics Data System (ADS)

    Mantese, Joseph

    2015-03-01

    Ubiquitous sensing is rapidly emerging as a means for globally optimizing systems of systems by providing both real time PHM (prognostics, diagnostics, and health monitoring), as well as expanded in-the-loop control. In closed or proprietary systems, such as in aerospace vehicles and life safety or security building systems; wireless signals and power must be supplied to a sensor network via single or multiple data concentrators in an architecture that ensures reliable/secure interconnectivity. In addition, such networks must be robust to environmental factors, including: corrosion, EMI/RFI, and thermal/mechanical variations. In this talk, we describe the use of additive manufacturing processes guided by physics based models for seamlessly embedding a sensor suite into aerospace and building system components; while maintaining their structural integrity and providing wireless power, sensor interrogation, and real-time diagnostics. We detail this approach as it specifically applies to industrial gas turbines for stationary land power. This work is supported through a grant from the National Energy Technology Laboratory (NETL), a division of the Department of Energy.

  4. Agile Development Methods for Space Operations

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Webster, Chris

    2012-01-01

    Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

  5. Intelligent electrical harness connector assembly using Bell Helicopter Textron's 'Wire Harness Automated Manufacturing System'

    NASA Astrophysics Data System (ADS)

    Springer, D. W.

    Bell Helicopter Textron, Incorporated (BHTI) installed two Digital Equipment Corporation PDP-11 computers and an American Can Inc. Ink Jet printer in 1980 as the cornerstone of the Wire Harness Automated Manufacturing System (WHAMS). WHAMS is based upon the electrical assembly philosophy of continuous filament harness forming. This installation provided BHTI with a 3 to 1 return-on-investment by reducing wire and cable identification cycle time by 80 percent and harness forming, on dedicated layout tooling, by 40 percent. Yet, this improvement in harness forming created a bottle neck in connector assembly. To remove this bottle neck, BHTI has installed a prototype connector assembly cell that integrates the WHAMS' data base and innovative computer technologies to cut harness connector assembly cycle time. This novel connector assembly cell uses voice recognition, laser identification, and animated computer graphics to help the electrician in the correct assembly of harness connectors.

  6. Computer-assisted design/computer-assisted manufacturing systems: A revolution in restorative dentistry.

    PubMed

    Sajjad, Arbaz

    2016-01-01

    For the better part of the past 20 years, dentistry has seen the development of many new all-ceramic materials and restorative techniques fueled by the desire to capture the ever elusive esthetic perfection. This has resulted in the fusion of the latest in material science and the pen ultimate in computer-assisted design/computer-assisted manufacturing (CAD/CAM) technology. This case report describes the procedure for restoring the esthetic appearance of both the left and right maxillary peg-shaped lateral incisors with a metal-free sintered finely structured feldspar ceramic material using the latest laboratory CAD/CAM system. The use of CAD/CAM technology makes it possible to produce restorations faster with precision- fit and good esthetics overcoming the errors associated with traditional ceramo-metal technology. The incorporation of this treatment modality would mean that the dentist working procedures will have to be adapted in the methods of CAD/CAM technology.

  7. Computer-implemented security evaluation methods, security evaluation systems, and articles of manufacture

    DOEpatents

    Muller, George; Perkins, Casey J.; Lancaster, Mary J.; MacDonald, Douglas G.; Clements, Samuel L.; Hutton, William J.; Patrick, Scott W.; Key, Bradley Robert

    2015-07-28

    Computer-implemented security evaluation methods, security evaluation systems, and articles of manufacture are described. According to one aspect, a computer-implemented security evaluation method includes accessing information regarding a physical architecture and a cyber architecture of a facility, building a model of the facility comprising a plurality of physical areas of the physical architecture, a plurality of cyber areas of the cyber architecture, and a plurality of pathways between the physical areas and the cyber areas, identifying a target within the facility, executing the model a plurality of times to simulate a plurality of attacks against the target by an adversary traversing at least one of the areas in the physical domain and at least one of the areas in the cyber domain, and using results of the executing, providing information regarding a security risk of the facility with respect to the target.

  8. Systems and Methods for Fabricating Objects Including Amorphous Metal Using Techniques Akin to Additive Manufacturing

    NASA Technical Reports Server (NTRS)

    Hofmann, Douglas (Inventor)

    2017-01-01

    Systems and methods in accordance with embodiments of the invention fabricate objects including amorphous metals using techniques akin to additive manufacturing. In one embodiment, a method of fabricating an object that includes an amorphous metal includes: applying a first layer of molten metallic alloy to a surface; cooling the first layer of molten metallic alloy such that it solidifies and thereby forms a first layer including amorphous metal; subsequently applying at least one layer of molten metallic alloy onto a layer including amorphous metal; cooling each subsequently applied layer of molten metallic alloy such that it solidifies and thereby forms a layer including amorphous metal prior to the application of any adjacent layer of molten metallic alloy; where the aggregate of the solidified layers including amorphous metal forms a desired shape in the object to be fabricated; and removing at least the first layer including amorphous metal from the surface.

  9. Methods of defining ontologies, word disambiguation methods, computer systems, and articles of manufacture

    DOEpatents

    Sanfilippo, Antonio P [Richland, WA; Tratz, Stephen C [Richland, WA; Gregory, Michelle L [Richland, WA; Chappell, Alan R [Seattle, WA; Whitney, Paul D [Richland, WA; Posse, Christian [Seattle, WA; Baddeley, Robert L [Richland, WA; Hohimer, Ryan E [West Richland, WA

    2011-10-11

    Methods of defining ontologies, word disambiguation methods, computer systems, and articles of manufacture are described according to some aspects. In one aspect, a word disambiguation method includes accessing textual content to be disambiguated, wherein the textual content comprises a plurality of words individually comprising a plurality of word senses, for an individual word of the textual content, identifying one of the word senses of the word as indicative of the meaning of the word in the textual content, for the individual word, selecting one of a plurality of event classes of a lexical database ontology using the identified word sense of the individual word, and for the individual word, associating the selected one of the event classes with the textual content to provide disambiguation of a meaning of the individual word in the textual content.

  10. Deadlock-free genetic scheduling algorithm for automated manufacturing systems based on deadlock control policy.

    PubMed

    Xing, KeYi; Han, LiBin; Zhou, MengChu; Wang, Feng

    2012-06-01

    Deadlock-free control and scheduling are vital for optimizing the performance of automated manufacturing systems (AMSs) with shared resources and route flexibility. Based on the Petri net models of AMSs, this paper embeds the optimal deadlock avoidance policy into the genetic algorithm and develops a novel deadlock-free genetic scheduling algorithm for AMSs. A possible solution of the scheduling problem is coded as a chromosome representation that is a permutation with repetition of parts. By using the one-step look-ahead method in the optimal deadlock control policy, the feasibility of a chromosome is checked, and infeasible chromosomes are amended into feasible ones, which can be easily decoded into a feasible deadlock-free schedule. The chromosome representation and polynomial complexity of checking and amending procedures together support the cooperative aspect of genetic search for scheduling problems strongly.

  11. Fuzzy methods in decision making process - A particular approach in manufacturing systems

    NASA Astrophysics Data System (ADS)

    Coroiu, A. M.

    2015-11-01

    We are living in a competitive environment, so we can see and understand that the most of manufacturing firms do the best in order to accomplish meeting demand, increasing quality, decreasing costs, and delivery rate. In present a stake point of interest is represented by the development of fuzzy technology. A particular approach for this is represented through the development of methodologies to enhance the ability to managed complicated optimization and decision making aspects involving non-probabilistic uncertainty with the reason to understand, development, and practice the fuzzy technologies to be used in fields such as economic, engineering, management, and societal problems. Fuzzy analysis represents a method for solving problems which are related to uncertainty and vagueness; it is used in multiple areas, such as engineering and has applications in decision making problems, planning and production. As a definition for decision making process we can use the next one: result of mental processes based upon cognitive process with a main role in the selection of a course of action among several alternatives. Every process of decision making can be represented as a result of a final choice and the output can be represented as an action or as an opinion of choice. Different types of uncertainty can be discovered in a wide variety of optimization and decision making problems related to planning and operation of power systems and subsystems. The mixture of the uncertainty factor in the construction of different models serves for increasing their adequacy and, as a result, the reliability and factual efficiency of decisions based on their analysis. Another definition of decision making process which came to illustrate and sustain the necessity of using fuzzy method: the decision making is an approach of choosing a strategy among many different projects in order to achieve some purposes and is formulated as three different models: high risk decision, usual risk

  12. Agile Data Curation: A conceptual framework and approach for practitioner data management

    NASA Astrophysics Data System (ADS)

    Young, J. W.; Benedict, K. K.; Lenhardt, W. C.

    2015-12-01

    Data management occurs across a range of science and related activities such as decision-support. Exemplars within the science community operate data management systems that are extensively planned before implementation, staffed with robust data management expertise, equipped with appropriate services and technologies, and often highly structured. However, this is not the only approach to data management and almost certainly not the typical experience. The other end of the spectrum is often an ad hoc practitioner team, with changing requirements, limited training in data management, and resource constrained for both equipment and human resources. Much of the existing data management literature serves the exemplar community and ignores the ad hoc practitioners. Somewhere in the middle are examples where data are repurposed for new uses thereby generating new data management challenges. This submission presents a conceptualization of an Agile Data Curation approach that provides foundational principles for data management efforts operating across the spectrum of data generation and use from large science systems to efforts with constrained resources, limited expertise, and evolving requirements. The underlying principles to Agile Data Curation are a reapplication of agile software development principles to data management. The historical reality for many data management efforts is operating in a practioner environment so Agile Data Curation utilizes historical and current case studies to validate the foundational principles and through comparison learn lessons for future application. This submission will provide an overview of the Agile Data Curation, cover the foundational principles to the approach, and introduce a framework for gathering, classifying, and applying lessons from case studies of practitioner data management.

  13. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

  14. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

  15. Peridigm summary report : lessons learned in development with agile components.

    SciTech Connect

    Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John; Parks, Michael L.

    2011-09-01

    This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of this approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.

  16. Development of an agility assessment module for preliminary fighter design

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

    1996-01-01

    A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

  17. Advanced Manufacturing Methods for Systems of Microsystem Nanospacecraft- Status of the Project

    NASA Astrophysics Data System (ADS)

    Plesseria, J. Y.; Corbelli, A.; Masse, C.; Rigo, O.; Pambaguian, L.; Bonvoisin, B.

    2014-06-01

    In the frame of an ESA TRP project, CSL, SIRRIS, ALMASpace and TAS-F associated to evaluate advanced manufacturing methods for application to space hardware.The state of the art of the new manufacturing methods, including additive manufacturing but also advanced bonding, joining and shaping techniques has been reviewed. Then three types of case studies have been developed successively. The first type was a re- manufacture of an existing piece of hardware using advanced techniques to evaluate if there is some potential improvement to be achieved (cost, production time, complexity reduction). The second level was to design and manufacture a part based on the application requirements. The last level was to design and manufacture a part taking into account the subsystem to which it belongs. All case studies have been tested in terms of achieved performances and resistance to the mechanical and thermal environment.

  18. Toward Failure Modeling In Complex Dynamic Systems: Impact of Design and Manufacturing Variations

    NASA Technical Reports Server (NTRS)

    Tumer, Irem Y.; McAdams, Daniel A.; Clancy, Daniel (Technical Monitor)

    2001-01-01

    When designing vehicle vibration monitoring systems for aerospace devices, it is common to use well-established models of vibration features to determine whether failures or defects exist. Most of the algorithms used for failure detection rely on these models to detect significant changes during a flight environment. In actual practice, however, most vehicle vibration monitoring systems are corrupted by high rates of false alarms and missed detections. Research conducted at the NASA Ames Research Center has determined that a major reason for the high rates of false alarms and missed detections is the numerous sources of statistical variations that are not taken into account in the. modeling assumptions. In this paper, we address one such source of variations, namely, those caused during the design and manufacturing of rotating machinery components that make up aerospace systems. We present a novel way of modeling the vibration response by including design variations via probabilistic methods. The results demonstrate initial feasibility of the method, showing great promise in developing a general methodology for designing more accurate aerospace vehicle vibration monitoring systems.

  19. A Case Study of Coordination in Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Hole, Steinar; Moe, Nils Brede

    Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

  20. Final report: An enabling architecture for information driven manufacturing

    SciTech Connect

    Griesmeyer, J.M.

    1997-08-01

    This document is the final report for the LDRD: An Enabling Architecture for Information Driven Manufacturing. The project was motivated by the need to bring quality products to market quickly and to remain efficient and profitable with small lot sizes, intermittent production and short product life cycles. The emphasis is on integration of the product realization process and the information required to drive it. Enterprise level information was not addressed except in so far as the enterprise must provide appropriate information to the production equipment to specify what to produce, and the equipment must return enough information to record what was produced. A production script approach was developed in which the production script specifies all of the information required to produce a quality product. A task sequencer that decomposes the script into process steps which are dispatched to capable Standard Manufacturing Modules. The plug and play interface to these modules allows rapid introduction of new modules into the production system and speeds up the product realization cycle. The results of applying this approach to the Agile Manufacturing Prototyping System are described.

  1. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the giant asteroid Vesta and the dwarf planet Ceres, the two largest members of the main asteroid belt. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional low-thrust design objectives (like minimum change in velocity or minimum transfer time) often result in thrust direction time evolutions that cannot be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and turned out to be essential to the successful navigation of Dawn at Vesta.

  2. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the two largest members of the main asteroid belt, the giant asteroid Vesta and the dwarf planet Ceres. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional thrust design objectives (like minimum (Delta)V or minimum transfer time) often result in thrust direction time evolutions that can not be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and necessary to successfully navigate Dawn through all orbital transfers at Vesta.

  3. Frequency Agile Transceiver for Advanced Vehicle Data Links

    NASA Technical Reports Server (NTRS)

    Freudinger, Lawrence C.; Macias, Filiberto; Cornelius, Harold

    2009-01-01

    Emerging and next-generation test instrumentation increasingly relies on network communication to manage complex and dynamic test scenarios, particularly for uninhabited autonomous systems. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. Frequency agility is one characteristic of reconfigurable radios that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate a promising chipset that performs conversion of RF signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit, programmable for any frequency band between 1 MHz and 6 GHz.

  4. Frequency/phase agile microwave circuits on ferroelectric films

    NASA Astrophysics Data System (ADS)

    Romanofsky, Robert Raymond

    This work describes novel microwave circuits that can be tuned in either frequency or phase through the use of nonlinear dielectrics, specifically thin ferroelectric films. These frequency and phase agile circuits in many cases provide a new capability or offer the potential for lower cost alternatives in satellite and terrestrial communications and sensor applications. A brief introduction to nonlinear dielectrics and a summary of some of the special challenges confronting the practical insertion of ferroelectric technology into commercial systems is provided. A theoretical solution for the propagation characteristics of the multi-layer structures, with emphasis on a new type of phase shifter based on coupled microstrip, lines, is developed. The quasi-TEM analysis is based on a variational solution for line capacitance and an extension of coupled transmission line theory. It is shown that the theoretical model is applicable to a broad class of multi-layer transmission lines. The critical role that ferroelectric film thickness plays in loss and phase-shift is closely examined. Experimental data for both thin film BaxSr1-xTiO 3 phase shifters near room temperature and SMO3 phase shifters at cryogenic temperatures on MgO and LaAlO3 substrates is included. Some of these devices demonstrated an insertion loss of less than 5 dB at Ku-band with continuously variable phase shift in excess of 360 degrees. The performance of these devices is superior to the state-of-the-art semiconductor counterparts. Frequency and phase agile antenna prototypes including a microstrip patch that can operate at multiple microwave frequency bands and a new type of phased array antenna concept called the ferroelectric reflectarray are introduced. Modeled data for tunable microstrip patch antennas is presented for various ferroelectric film thickness. A prototype linear phased array, with a conventional beam-forming manifold, and an electronic controller is described. This is the first

  5. Apparel Manufacture

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Marshall Space Flight Center teamed with the University of Alabama in Huntsville (UAH) in 1989 on a program involving development of advanced simulation software. Concurrently, the State of Alabama chartered UAH to conduct a technology advancement program in support of the state's apparel manufacturers. In 1992, under contract to Marshall, UAH developed an apparel-specific software package that allows manufacturers to design and analyze modules without making an actual investment -- it functions on ordinary PC equipment. By 1995, Marshall had responded to requests for the package from more than 400 companies in 36 states; some of which reported savings up to $2 million. The National Garment Company of Missouri, for example, uses the system to design and balance a modular line before committing to expensive hardware; for setting up sewing lines; and for determining the composition of a new team.

  6. Unit cell-based computer-aided manufacturing system for tissue engineering.

    PubMed

    Kang, Hyun-Wook; Park, Jeong Hun; Kang, Tae-Yun; Seol, Young-Joon; Cho, Dong-Woo

    2012-03-01

    Scaffolds play an important role in the regeneration of artificial tissues or organs. A scaffold is a porous structure with a micro-scale inner architecture in the range of several to several hundreds of micrometers. Therefore, computer-aided construction of scaffolds should provide sophisticated functionality for porous structure design and a tool path generation strategy that can achieve micro-scale architecture. In this study, a new unit cell-based computer-aided manufacturing (CAM) system was developed for the automated design and fabrication of a porous structure with micro-scale inner architecture that can be applied to composite tissue regeneration. The CAM system was developed by first defining a data structure for the computing process of a unit cell representing a single pore structure. Next, an algorithm and software were developed and applied to construct porous structures with a single or multiple pore design using solid freeform fabrication technology and a 3D tooth/spine computer-aided design model. We showed that this system is quite feasible for the design and fabrication of a scaffold for tissue engineering.

  7. Initiate Instruction in Manufacturing Systems Engineering by Industrial and Government Experts over NTU Satellite Network.

    ERIC Educational Resources Information Center

    Baldwin, Lionel V.

    Based on the assumption that there is a need for advanced education among both new graduates of programs for manufacturing engineers and currently practicing engineers, a National Technological University (NTU) project produced instructional modules on manufacturing engineering topics developed by industrial, government, consulting, and academic…

  8. Human Issues in Manufacturing Technology

    DTIC Science & Technology

    1992-09-01

    conventional mass- production manufacturing and the benefits of lean manufacturing . The text details the results of a five-year, multi national study...data and comparisons between mass and lean manufacturing . The key objective is to "illustrate the transition from mass to lean production with...of reference for the transition from current manufacturing systems to the goal state of lean manufacturing . Manufacturing before change is referred to

  9. Agile supply chain capabilities: emerging patterns as a determinant of competitive objectives

    NASA Astrophysics Data System (ADS)

    Yusuf, Yahaya Y.; Adeleye, E. O.; Sivayoganathan, K.

    2001-10-01

    Turbulent change caused by factors such as changing customer and technological requirements threatens manufacturers through lower product life cycles, profits and bleak survival prospects. Therefore, several companies are stressing flexibility and agility in order to respond, real time, to the unique needs of customers and markets. However, the resource competencies required are often difficult to mobilise and retain by single companies. It is therefore imperative for companies to co-operate and leverage complementary competencies. To this end, legally separate and spatially distributed companies are becoming integrated through Internet-based technologies. The paper reviews emerging patterns in supply chain integration. It also explores the relationship between the emerging patterns and attainment of competitive objectives. The results reported in the paper are based on data from a survey by questionnaire. The survey involved 600 companies in the UK, as part of a larger study of agile manufacturing. The study was driven by a conceptual model, which relates supply chain practices to competitive objectives. The analysis involves the use of factor analysis to reduce research variables to a few principal components. Subsequently, multiple regression was conducted to study the relationship amongst the reduced variables. The results validate the proposed conceptual model and lend credence to current thinking that supply chain integration is a vital tool for competitive advantage.

  10. An Assay System for Point-of-Care Diagnosis of Tuberculosis using Commercially Manufactured PCB Technology.

    PubMed

    Evans, Daniel; Papadimitriou, Konstantinos I; Greathead, Louise; Vasilakis, Nikolaos; Pantelidis, Panagiotis; Kelleher, Peter; Morgan, Hywel; Prodromakis, Themistoklis

    2017-04-06

    Rapid advances in clinical technologies, detection sensitivity and analytical throughput have delivered a significant expansion in our knowledge of prognostic and diagnostic biomarkers in many common infectious diseases, such as Tuberculosis (TB). During the last decade, a significant number of approaches to TB diagnosis have been attempted at Point-of-Care (PoC), exploiting a large variation of techniques and materials. In this work, we describe an electronics-based Enzyme-Linked ImmunoSorbent Assay (eELISA), using a Lab-on-a-Printed Circuit Board (LoPCB) approach, for TB diagnosis based on cytokine detection. The test relies upon an electrochemical (amperometric) assay, comprising a high-precision bioinstrumentation board and amperometric sensors, produced exclusively using standard PCB manufacturing processes. Electrochemical detection uses standard Au and Ag electrodes together with a bespoke, low-power, multichannel, portable data-acquisition system. We demonstrate high-performance assay chemistry performed at microfluidic volumes on Au pads directly at the PCB surface with improved limit of detection (~10 pg/mL) over standard colorimetric ELISA methods. The assay has also been implemented in plasma, showing the utility of the system for medical applications. This work is a significant step towards the development of a low-cost, portable, high-precision diagnostic and monitoring technology, which once combined with appropriate PCB-based microfluidic networks will provide complete LoPCB platforms.

  11. Surface Roughness Measurement of Parts Manufactured by FDM Process using Light Sectioning Vision System

    NASA Astrophysics Data System (ADS)

    Kelkar, A. S.; Kumbhar, N. N.; Mulay, A. V.

    2016-08-01

    Fused Deposition Modeling (FDM) is a process of developing prototypes by depositing layers of material according to predetermined cross sectional geometry. Quality of the produced part is highly dependent on surface finish. This work describes a methodology to calculate the surface roughness of part manufactured using FDM process. The surface roughness values are measured using conventional stylus instrument and light sectioning vision system. In conventional stylus instrument method, diamond tipped stylus destroys the surface topography. Light sectioning method is non-contact method hence it overcomes this problem. In light sectioning method microscope and light source are arranged in such a manner, as both are inclined at an angle of 45° to the normal plane. The light section is projected on surface of profile at an incident angle of 45°. The reflected light can be observed using microscope. The camera is connected with microscope to capture the micrograph. These images are analyzed and processed using various image processing techniques. Experimental results are validated by comparing final results with conventional system.

  12. Novel fully integrated computer system for custom footwear: from 3D digitization to manufacturing

    NASA Astrophysics Data System (ADS)

    Houle, Pascal-Simon; Beaulieu, Eric; Liu, Zhaoheng

    1998-03-01

    This paper presents a recently developed custom footwear system, which integrates 3D digitization technology, range image fusion techniques, a 3D graphical environment for corrective actions, parametric curved surface representation and computer numerical control (CNC) machining. In this system, a support designed with the help of biomechanics experts can stabilize the foot in a correct and neutral position. The foot surface is then captured by a 3D camera using active ranging techniques. A software using a library of documented foot pathologies suggests corrective actions on the orthosis. Three kinds of deformations can be achieved. The first method uses previously scanned pad surfaces by our 3D scanner, which can be easily mapped onto the foot surface to locally modify the surface shape. The second kind of deformation is construction of B-Spline surfaces by manipulating control points and modifying knot vectors in a 3D graphical environment to build desired deformation. The last one is a manual electronic 3D pen, which may be of different shapes and sizes, and has an adjustable 'pressure' information. All applied deformations should respect a G1 surface continuity, which ensure that the surface can accustom a foot. Once the surface modification process is completed, the resulting data is sent to manufacturing software for CNC machining.

  13. Solar PV Manufacturing Cost Model Group: Installed Solar PV System Prices (Presentation)

    SciTech Connect

    Goodrich, A. C.; Woodhouse, M.; James, T.

    2011-02-01

    EERE's Solar Energy Technologies Program is charged with leading the Secretary's SunShot Initiative to reduce the cost of electricity from solar by 75% to be cost competitive with conventional energy sources without subsidy by the end of the decade. As part of this Initiative, the program has funded the National Renewable Energy Laboratory (NREL) to develop module manufacturing and solar PV system installation cost models to ensure that the program's cost reduction targets are carefully aligned with current and near term industry costs. The NREL cost analysis team has leveraged the laboratories' extensive experience in the areas of project finance and deployment, as well as industry partnerships, to develop cost models that mirror the project cost analysis tools used by project managers at leading U.S. installers. The cost models are constructed through a "bottoms-up" assessment of each major cost element, beginning with the system's bill of materials, labor requirements (type and hours) by component, site-specific charges, and soft costs. In addition to the relevant engineering, procurement, and construction costs, the models also consider all relevant costs to an installer, including labor burdens and overhead rates, supply chain costs, and overhead and materials inventory costs, and assume market-specific profits.

  14. Monitoring of manufacturing processes in the automotive industry using indoor location system

    NASA Astrophysics Data System (ADS)

    Ionescu, LM; Belu, N.; Rachieru, N.; Mazăre, AG; Anghel, D.-C.

    2016-08-01

    This paper presents a method for locating the operators, equipment and parts using radio communications systems. Specifically there will be radio transceiver arranged in a network of active and passive radio receivers placed on personnel, equipment or parts. Based on a radio triangulation method, it is determined the location of the all resources and parts involved in manufacturing process. The transceivers communicate with each other via “routers” - also components of the network. Such a structure may extend over large distances even in indoor spaces where there are obstacles (walls between rooms). The location is done by determining the power of transmission signal for at least three end points. The receiver position is then transmitted over the network through routers, to a central server where all positions of the resources are centralized. Our solution is a non-invasive and low cost method for determining resource position in the factory. The system can be used for both resource planning production for current process more efficient and for further analysis of the movement of resources during previous processes with possible adjustments to the workspace and re-planning of resources for future processes.

  15. Manufacturing Success

    ERIC Educational Resources Information Center

    Reese, Susan

    2007-01-01

    According to the National Association of Manufacturers (NAM), "manufacturing is the engine that drives American prosperity". When NAM and its research and education arm, The Manufacturing Institute, released the handbook, "The Facts About Modern Manufacturing," in October 2006, NAM President John Engler noted, that…

  16. Compressed Air System Overhaul Improves Production at a Powdered Metal Manufacturing Plant (GKN Sinter Metals in Salem, IN)

    SciTech Connect

    2000-11-01

    In 1998, GKN Sinter Metals completed a successful compressed air system improvement project at its Salem, Indiana manufacturing facility. The project was performed after GKN undertook a survey of its system in order to solve air quality problems and to evaluate whether the capacity of their compressed air system would meet their anticipated plant expansion. Once the project was implemented, the plant was able to increase production by 31% without having to add any additional compressor capacity.

  17. Mitigating Diminishing Manufacturing Sources Material Shortages (DMS/MS) and Obsolescence for the T-6 Canopy Fracturing Initiation System (CFIS)

    DTIC Science & Technology

    2012-03-01

    6 CANOPY FRACTURING INITIATION SYSTEM (CFIS) THESIS Richard P. Carrano, DP-5, USN AFIT/GSE/ENV/12-M01DL DEPARTMENT OF THE AIR FORCE AIR...SOURCES/MATERIAL SHORTAGES (DMS/MS) AND OBSOLESCENCE FOR THE T-6 CANOPY FRACTURING INITIATION SYSTEM (CFIS) THESIS Presented to the Faculty...DIMINISHING MANUFACTURING SOURCES/MATERIAL SHORTAGES (DMS/MS) AND OBSOLESCENCE FOR THE T-6 CANOPY FRACTURING INITIATION SYSTEM (CFIS

  18. 40 CFR 63.149 - Control requirements for certain liquid streams in open systems within a chemical manufacturing...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... streams in open systems within a chemical manufacturing process unit. 63.149 Section 63.149 Protection of... Vessels, Transfer Operations, and Wastewater § 63.149 Control requirements for certain liquid streams in... 0.02 liter per minute, or (2) Is a tank that receives one or more streams that contain water with...

  19. Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

    ERIC Educational Resources Information Center

    Nee, John G.; Kare, Audhut P.

    1987-01-01

    Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

  20. AFFORDABLE MULTI-LAYER CERAMIC (MLC) MANUFACTURING FOR POWER SYSTEMS (AMPS)

    SciTech Connect

    E.A. Barringer, Ph.D.

    2002-11-27

    McDermott Technology, Inc. (MTI) is attempting to develop high-performance, cost-competitive solid oxide fuel cell (SOFC) power systems. Recognizing the challenges and limitations facing the development of SOFC stacks comprised of electrode-supported cells and metallic interconnects, McDermott Technology, Inc. (MTI) has chosen to pursue an alternate path to commercialization. MTI is developing a multi-layer, co-fired, planar SOFC stack that will provide superior performance and reliability at reduced costs relative to competing designs. The MTI approach combines state-of-the-art SOFC materials with the manufacturing technology and infrastructure established for multi-layer ceramic (MLC) packages for the microelectronics industry. The rationale for using MLC packaging technology is that high quality, low-cost manufacturing has been demonstrated at high volumes. With the proper selection of SOFC materials, implementation of MLC fabrication methods offers unique designs for stacks (cells and interconnects) that are not possible through traditional fabrication methods. The MTI approach eliminates use of metal interconnects and ceramic-metal seals, which are primary sources of stack performance degradation. Co-fired cells are less susceptible to thermal cycling stresses by using material compositions that have closely matched coefficients of thermal expansion between the cell and the interconnect. The development of this SOFC stack technology was initiated in October 1999 under the DOE cosponsored program entitled ''Affordable Multi-layer Ceramic Manufacturing for Power Systems (AMPS)''. The AMPS Program was conducted as a two-phase program: Phase I--Feasibility Assessment (10/99--9/00); and Phase II--Process Development for Co-fired Stacks (10/00-3/02). This report provides a summary of the results from Phase I and a more detailed review of the results for Phase II. Phase I demonstrated the feasibility for fabricating multi-layer, co-fired cells and interconnects and

  1. Airborne Wind Shear Detection and Warning Systems. Second Combined Manufacturers' and Technologists' Conference, part 1

    NASA Technical Reports Server (NTRS)

    Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

    1990-01-01

    The Second Combined Manufacturers' and Technologists' Conference hosted jointly by NASA Langley (LaRC) and the Federal Aviation Administration (FAA) was held in Williamsburg, Virginia, on October 18 to 20, 1988. The purpose of the meeting was to transfer significant, ongoing results gained during the second year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

  2. Airborne Wind Shear Detection and Warning Systems: Third Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

    1991-01-01

    The Third Combined Manufacturers' and Technologists' Conference was held in Hampton, Va., on October 16-18, 1990. The purpose of the meeting was to transfer significant on-going results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

  3. Compact, flexible, frequency agile parametric wavelength converter

    DOEpatents

    Velsko, Stephan P.; Yang, Steven T.

    2002-01-01

    This improved Frequency Agile Optical Parametric Oscillator provides near on-axis pumping of a single QPMC with a tilted periodically poled grating to overcome the necessity to find a particular crystal that will permit collinear birefringence in order to obtain a desired tuning range. A tilted grating design and the elongation of the transverse profile of the pump beam in the angle tuning plane of the FA-OPO reduces the rate of change of the overlap between the pumped volume in the crystal and the resonated and non-resonated wave mode volumes as the pump beam angle is changed. A folded mirror set relays the pivot point for beam steering from a beam deflector to the center of the FA-OPO crystal. This reduces the footprint of the device by as much as a factor of two over that obtained when using the refractive telescope design.

  4. CNT reinforced epoxy foamed and electrospun nano-fiber interlayer systems for manufacturing lighter and stronger featherweight(TM) composites

    NASA Astrophysics Data System (ADS)

    Drakonakis, Vasileios M.

    Multiple works have been performed in improving carbon fiber reinforced polymer (CFRP) composites especially in terms of strength so delamination, which is the major defect in laminated composites, is prevented. Nevertheless, there is not much focus on improving conventional CFRP systems in terms of weight especially when these are used in primary structures. This work questions whether lighter and at the same time stronger CFRP composites can be manufactured in order to replace conventional CFRP systems in major applications. Under this perspective, this study demonstrates that inducing controlled porosity may offer a systemic approach for manufacturing light weight carbon fiber reinforced polymer (CFRP) matrix composites. Additionally, towards this scope, this work has focused on analyzing and describing the related matrix systems utilizing mostly classic viscoelastic theory. An in-depth characterization of the thermosetting matrix systems viscoelasticity kinetics as well as of the impregnation process towards its improvement in terms of lower cost is explored. Overall, this work makes an effort to establish the fundamentals for creating the next generation of light weight structural composites, the featherweight composites, by introducing porosity through several controlled reinforcements in a systemic and reproducible manner at the macro- micro- and nano- scales in the interlayer. By extensively describing the matrix system and the manufacturing processes and focusing on analytically testing the interlayer reinforcement systems, it is expected that featherweight CFRP will achieve lighter weight and at the same time higher mechanical properties.

  5. Results of a field test of heating system efficiency and thermal distribution system efficiency in a manufactured home

    SciTech Connect

    Andrews, J.W.; Krajewski, R.F.; Strasser, J.J.; Kinney, L.; Lewis, G.

    1995-05-01

    A two-day test using electric coheating was performed on a manufactured home in Watertown, New York. The main objective of the test was to evaluate planned procedures for measuring thermal distribution system efficiency. (Thermal distribution systems are the ductwork or piping used to transport heat or cooling effect from the equipment that produces it to the building spaces in which it is used.) These procedures are under consideration for a standard method of test now being prepared by a special committee of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers. The ability of a coheating test to give a credible and repeatable value for the overall heating system efficiency was supported by the test data. Distribution efficiency is derived from system efficiency by correcting for energy losses from the equipment. Alternative means for achieving this were tested and assessed. The best value for system efficiency in the Watertown house was 0.53, while the best value for distribution efficiency was 0.72.

  6. Computer-assisted design/computer-assisted manufacturing systems: A revolution in restorative dentistry

    PubMed Central

    Sajjad, Arbaz

    2016-01-01

    For the better part of the past 20 years, dentistry has seen the development of many new all-ceramic materials and restorative techniques fueled by the desire to capture the ever elusive esthetic perfection. This has resulted in the fusion of the latest in material science and the pen ultimate in computer-assisted design/computer-assisted manufacturing (CAD/CAM) technology. This case report describes the procedure for restoring the esthetic appearance of both the left and right maxillary peg-shaped lateral incisors with a metal-free sintered finely structured feldspar ceramic material using the latest laboratory CAD/CAM system. The use of CAD/CAM technology makes it possible to produce restorations faster with precision- fit and good esthetics overcoming the errors associated with traditional ceramo-metal technology. The incorporation of this treatment modality would mean that the dentist working procedures will have to be adapted in the methods of CAD/CAM technology. PMID:27134436

  7. Life cycle assessment of façade coating systems containing manufactured nanomaterials

    NASA Astrophysics Data System (ADS)

    Hischier, Roland; Nowack, Bernd; Gottschalk, Fadri; Hincapie, Ingrid; Steinfeldt, Michael; Som, Claudia

    2015-02-01

    Nanotechnologies are expected to hold considerable potential for the development of new materials in the construction sector. Up to now the environmental benefits and risks of products containing manufactured nanomaterials (MNM) have been quantified only to a limited extent. This study aims to assess the potential environmental, health and safety impacts of coatings containing MNM using Life-cycle assessment: Do paints containing MNM result in a better environmental performance than paints not containing MNM? The study shows that the results depend on a number of factors: (i) The MNM have to substitute an (active) ingredient of the initial paint composition and not simply be an additional ingredient. (ii) The new composition has to extend the lifetime of the paint for such a time period that the consumption of paint along the life cycle of a building is reduced. (iii) Releases of MNM have to be reduced to the lowest level possible (in particular by dumping unused paint together with the packaging). Only when all these boundary conditions are fulfilled, which is the case only for one of the three paint systems examined, is an improved environmental performance of the MNM-containing paint possible for the paint compositions examined in this study.

  8. Innovative system for real-time ergonomic feedback in industrial manufacturing.

    PubMed

    Vignais, Nicolas; Miezal, Markus; Bleser, Gabriele; Mura, Katharina; Gorecky, Dominic; Marin, Frédéric

    2013-07-01

    This work presents a system that permits a real-time ergonomic assessment of manual tasks in an industrial environment. First, a biomechanical model of the upper body has been developed by using inertial sensors placed at different locations on the upper body. Based on this model, a computerized RULA ergonomic assessment was implemented to permit a global risk assessment of musculoskeletal disorders in real-time. Furthermore, local scores were calculated per segment, e.g. the neck region, and gave information on the local risks for musculoskeletal disorders. Visual information was fed back to the user by using a see-through head mounted display. Additional visual highlighting and auditory warnings were provided when some predefined thresholds were exceeded. In a user study (N = 12 participants) a group with the RULA feedback was compared to a control group. Results demonstrate that the real-time ergonomic feedback significantly decreased the outcome of both globally as well as locally hazardous RULA values that are associated with increased risk for musculoskeletal disorders. Task execution time did not differ between groups. The real-time ergonomic tool introduced in this study has the potential to considerably reduce the risk of musculoskeletal disorders in industrial settings. Implications for ergonomics in manufacturing and user feedback modalities are further discussed.

  9. Utilization Elementary Siphons of Petri Net to Solved Deadlocks in Flexible Manufacturing Systems

    NASA Astrophysics Data System (ADS)

    Abdul-Hussin, Mowafak Hassan

    2015-07-01

    This article presents an approach to the constructing a class structural analysis of Petri nets, where elementary siphons are mainly used in the development of a deadlock control policy of flexible manufacturing systems (FMSs), that has been exploited successfully for the design of supervisors of some supervisory control problems. Deadlock-free operation of FMSs is significant objectives of siphons in the Petri net. The structure analysis of Petri net models has efficiency in control of FMSs, however different policy can be implemented for the deadlock prevention. Petri nets models based deadlock prevention for FMS's has gained considerable interest in the development of control theory and methods for design, controlling, operation, and performance evaluation depending of the special class of Petri nets called S3PR. Both structural analysis and reachability tree analysis is used for the purposes analysis, simulation and control of Petri nets. In our ex-perimental approach based to siphon is able to resolve the problem of deadlock occurred to Petri nets that are illustrated with an FMS.

  10. Materials/manufacturing support element for the Advanced Turbine Systems Program

    SciTech Connect

    Karnitz, M.A.; Hoffman, E.E.; Parks, W.P.

    1994-12-31

    In 1993, DOE initiated a program to develop advanced gas turbines for power generation in utility and industrial applications. A materials/manufacturing plan was developed in several stages with input from gas turbine manufacturers, materials suppliers, universities, and government laboratories. This plan was developed by a small advanced materials and turbine technology team over a 6-month period. The technology plan calls for initiation of several high priority projects in FY 1995. The technical program for the materials/manufacturing element focuses on generic materials issues, components, and manufacturing processes. Categories include coatings and process development, turbine airfoil development, ceramics adaptation, directional solidification and single crystal airfoils manufactoring technology, materials characterization, catalytic combustor materials, and technology information exchange.

  11. Energy recovery method and system for combined sulphuric acid and phosphoric acid manufacturing plant

    SciTech Connect

    Cameron, G. M.; Orlando, J. V.

    1985-01-22

    In conventional processes for manufacturing phosphoric acid, sulphuric acid is reacted with phosphate rock to produce weak phosphoric acid which is concentrated using steam from the associated sulphuric acid manufacturing operation. Low grade heat from the absorbers and drier of the sulphuric acid manufacturing plant has been wasted. According to the invention waste heat from the drier and one or more absorbers of the sulphuric acid manufacturing plant is used in all the evaporators of the phosphoric acid plant. The evaporators all operate at low pressures and their heaters are arranged in series, to enable the heat to be used at the relatively low temperatures available. The valuable steam is thus freed for other uses.

  12. Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems.

    PubMed

    Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

    2016-01-05

    This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees' psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees' performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees' psychological characteristics and either direct or indirect effects on the employees' performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees' performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems' performance by enhancing their macroergonomic compatibility and quality of life at work of the employees.

  13. Airborne Wind Shear Detection and Warning Systems: First Combined Manufacturers' and Technologists' Conference

    NASA Technical Reports Server (NTRS)

    Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

    1988-01-01

    The purpose of the meeting was to transfer significant, ongoing results gained during the first year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-looking technology concepts and for technologists to gain an understanding of FAA certification requirements and the problems encountered by the manufacturers during the development of airborne equipment.

  14. Extraterrestrial processing and manufacturing of large space systems, volume 1, chapters 1-6

    NASA Technical Reports Server (NTRS)

    Miller, R. H.; Smith, D. B. S.

    1979-01-01

    Space program scenarios for production of large space structures from lunar materials are defined. The concept of the space manufacturing facility (SMF) is presented. The manufacturing processes and equipment for the SMF are defined and the conceptual layouts are described for the production of solar cells and arrays, structures and joints, conduits, waveguides, RF equipment radiators, wire cables, and converters. A 'reference' SMF was designed and its operation requirements are described.

  15. GRB 070724B: the first Gamma Ray Burst localized by SuperAGILE

    SciTech Connect

    Del Monte, E.; Costa, E.; Donnarumma, I.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Soffitta, P.; Argan, A.; Pucella, G.; Trois, A.; Vittorini, V.; Evangelista, Y.; Rapisarda, M.; Barbiellini, G.; Longo, F.; Basset, M.; Foggetta, L.; Vallazza, E.; Bulgarelli, A.; Di Cocco, G.

    2008-05-22

    GRB070724B is the first Gamma Ray Burst localized by the SuperAGILE instrument aboard the AGILE space mission. The SuperAGILE localization has been confirmed after the after-glow observation by the XRT aboard the Swift satellite. No significant gamma ray emission above 50 MeV has been detected for this GRB. In this paper we describe the SuperAGILE capabilities in detecting Gamma Ray Burst and the AGILE observation of GRB 070724B.

  16. Value Creation by Agile Projects: Methodology or Mystery?

    NASA Astrophysics Data System (ADS)

    Racheva, Zornitza; Daneva, Maya; Sikkel, Klaas

    Business value is a key concept in agile software development approaches. This paper presents results of a systematic review of literature on how business value is created by agile projects. We found that with very few exceptions, most published studies take the concept of business value for granted and do not state what it means in general as well as in the specific study context. We could find no study which clearly indicates how exactly individual agile practices or groups of those create value and keep accumulating it over time. The key implication for research is that we have an incentive to pursue the study of value creation in agile project by deploying empirical research methods.

  17. Laterality and performance of agility-trained dogs.

    PubMed

    Siniscalchi, Marcello; Bertino, Daniele; Quaranta, Angelo

    2014-01-01

    Correlations between lateralised behaviour and performance were investigated in 19 agility-trained dogs (Canis familiaris) by scoring paw preference to hold a food object and relating it to performance during typical agility obstacles (jump/A-frame and weave poles). In addition, because recent behavioural studies reported that visual stimuli of emotional valence presented to one visual hemifield at a time affect visually guided motor responses in dogs, the possibility that the position of the owner respectively in the left and in the right canine visual hemifield might be associated with quality of performance during agility was considered. Dogs' temperament was also measured by an owner-rated questionnaire. The most relevant finding was that agility-trained dogs displayed longer latencies to complete the obstacles with the owner located in their left visual hemifield compared to the right. Interestingly, the results showed that this phenomenon was significantly linked to both dogs' trainability and the strength of paw preference.

  18. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse-to- pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent DIAL measurements in the field.

  19. Investigation into the impact of agility on conceptual fighter design

    NASA Technical Reports Server (NTRS)

    Engelbeck, R. M.

    1995-01-01

    The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

  20. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse to pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent Differential Absorption LIDAR (DIAL) measurements in the field.

  1. Structural Model for the Effects of Environmental Elements on the Psychological Characteristics and Performance of the Employees of Manufacturing Systems

    PubMed Central

    Realyvásquez, Arturo; Maldonado-Macías, Aidé Aracely; García-Alcaraz, Jorge; Cortés-Robles, Guillermo; Blanco-Fernández, Julio

    2016-01-01

    This paper analyzes the effects of environmental elements on the psychological characteristics and performance of employees in manufacturing systems using structural equation modeling. Increasing the comprehension of these effects may help optimize manufacturing systems regarding their employees’ psychological characteristics and performance from a macroergonomic perspective. As the method, a new macroergonomic compatibility questionnaire (MCQ) was developed and statistically validated, and 158 respondents at four manufacture companies were considered. Noise, lighting and temperature, humidity and air quality (THAQ) were used as independent variables and psychological characteristics and employees’ performance as dependent variables. To propose and test the hypothetical causal model of significant relationships among the variables, a data analysis was deployed. Results found that the macroergonomic compatibility of environmental elements presents significant direct effects on employees’ psychological characteristics and either direct or indirect effects on the employees’ performance. THAQ had the highest direct and total effects on psychological characteristics. Regarding the direct and total effects on employees’ performance, the psychological characteristics presented the highest effects, followed by THAQ conditions. These results may help measure and optimize manufacturing systems’ performance by enhancing their macroergonomic compatibility and quality of life at work of the employees. PMID:26742054

  2. Agile based "Semi-"Automated Data ingest process : ORNL DAAC example

    NASA Astrophysics Data System (ADS)

    Santhana Vannan, S. K.; Beaty, T.; Cook, R. B.; Devarakonda, R.; Hook, L.; Wei, Y.; Wright, D.

    2015-12-01

    The ORNL DAAC archives and publishes data and information relevant to biogeochemical, ecological, and environmental processes. The data archived at the ORNL DAAC must be well formatted, self-descriptive, and documented, as well as referenced in a peer-reviewed publication. The ORNL DAAC ingest team curates diverse data sets from multiple data providers simultaneously. To streamline the ingest process, the data set submission process at the ORNL DAAC has been recently updated to use an agile process and a semi-automated workflow system has been developed to provide a consistent data provider experience and to create a uniform data product. The goals of semi-automated agile ingest process are to: 1.Provide the ability to track a data set from acceptance to publication 2. Automate steps that can be automated to improve efficiencies and reduce redundancy 3.Update legacy ingest infrastructure 4.Provide a centralized system to manage the various aspects of ingest. This talk will cover the agile methodology, workflow, and tools developed through this system.

  3. Agile Software Development in Defense Acquisition: A Mission Assurance Perspective

    DTIC Science & Technology

    2012-03-23

    AEROSPACE REPORT NO ATR -2012(9010)-2 Agile Software Development in Defense Acquisition - A Mission Assurance Perspective March 23, 2012 Peter...release; distribution unlimited. aoUc£23>o;r7 AEROSPACE REPORT NO ATR -2012(9010)-2 Agile Software Development in Defense Acquisition - A Mission...Engineering and Technology Group Approved for public release; distribution unlimited. (A\\ AEROSPACE ^•^ Aautoff $m MK*I? taH AEROSPACE REPORT NO ATR

  4. Coaching for Better (Software) Buying Power in an Agile World

    DTIC Science & Technology

    2013-06-01

    professionals carefully to consider incorporation of agile methodologies into the set of acquisition tools at their disposal. This transformation is not...believes that DevOps , the process of warfighters and developers work- ing together throughout the project, is superior to volumes of detailed...Professionalism of the Total Acquisition Workforce The DoD needs to invest in training the acquisition workforce in agile methodologies to add tools that

  5. Addressing the Barriers to Agile Development in DoD

    DTIC Science & Technology

    2015-05-01

    acquisition development  IT programs are subject to extensive documentation, reviews, and oversight that inhibits speed and agility needed for IT  Major...Based on Program, Ops, and Technical Risk Structuring an Agile Program  Notional: 6 Month Release with 4-Week Sprints – Continual development...integration, and testing – Monthly demonstration of capabilities to users  Gov’t testers, certifiers, and users involved early and often – Minimizes

  6. Architectural Tactics to Support Rapid and Agile Stability

    DTIC Science & Technology

    2012-05-01

    20 CrossTalk—May/June 2012 RAPID AND AGILE STABILITY • Scrum teams, product development teams, component teams, or feature teams spend almost...and individuals in the roles of Scrum master, developer, project manager, and architect on projects from organizations that develop embedded real...agile stability. Using Scrum , 25 teams participated in the develop- ment effort. Some of the teams were colocated; teams (waste), while not evolving

  7. Need for Agility in Security Constraints for Distributed Simulation

    DTIC Science & Technology

    2014-06-01

    Submission to: 19th ICCRTS Title: Need for Agility in Security Constraints for Distributed Simulation (024) Topics: Primary Topic: 5...Modelling and Simulation , Alternates: 4. Experimentation, Metrics and Analysis, and 1. Concepts, Theory, and Policy S. K. Numrich, Ph.D...REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Need for Agility in Security Constraints for Distributed Simulation

  8. Light-Driven Chiral Molecular Motors for Passive Agile Filters

    DTIC Science & Technology

    2014-05-20

    AFRL-OSR-VA-TR-2014-0121 LIGHT-DRIVEN CHIRAL MOLECULAR MOTORS FOR PASSIVE AGILE FILTERS Quan Li KENT STATE UNIV OH Final Report 05/20/2014...Prescribed by ANSI Std. Z39.18 1 FINAL REPORT Title: Light-driven Chiral Molecular Motors for Passive Agile Filters AFOSR...As we proposed originally, the major objective of this project was to synthesize novel light- driven chiral molecular motors or switches targeted

  9. Agile text mining for the 2014 i2b2/UTHealth Cardiac risk factors challenge.

    PubMed

    Cormack, James; Nath, Chinmoy; Milward, David; Raja, Kalpana; Jonnalagadda, Siddhartha R

    2015-12-01

    This paper describes the use of an agile text mining platform (Linguamatics' Interactive Information Extraction Platform, I2E) to extract document-level cardiac risk factors in patient records as defined in the i2b2/UTHealth 2014 challenge. The approach uses a data-driven rule-based methodology with the addition of a simple supervised classifier. We demonstrate that agile text mining allows for rapid optimization of extraction strategies, while post-processing can leverage annotation guidelines, corpus statistics and logic inferred from the gold standard data. We also show how data imbalance in a training set affects performance. Evaluation of this approach on the test data gave an F-Score of 91.7%, one percent behind the top performing system.

  10. Agile Text Mining for the 2014 i2b2/UTHealth Cardiac Risk Factors Challenge

    PubMed Central

    Cormack, James; Nath, Chinmoy; Milward, David; Raja, Kalpana; Jonnalagadda, Siddhartha R

    2016-01-01

    This paper describes the use of an agile text mining platform (Linguamatics’ Interactive Information Extraction Platform, I2E) to extract document-level cardiac risk factors in patient records as defined in the i2b2/UTHealth 2014 Challenge. The approach uses a data-driven rule-based methodology with the addition of a simple supervised classifier. We demonstrate that agile text mining allows for rapid optimization of extraction strategies, while post-processing can leverage annotation guidelines, corpus statistics and logic inferred from the gold standard data. We also show how data imbalance in a training set affects performance. Evaluation of this approach on the test data gave an F-Score of 91.7%, one percent behind the top performing system. PMID:26209007

  11. Autonomous, agile micro-satellites and supporting technologies

    SciTech Connect

    Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

    1999-07-19

    This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

  12. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  13. Airborne Wind Shear Detection and Warning Systems. Second Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

    1990-01-01

    The Second Combined Manufacturers' and Technologists' Conference was hosted jointly by NASA Langley (LaRC) and the Federal Aviation Administration (FAA) in Williamsburg, Virginia, on October 18 to 20, 1988. The meeting was co-chaired by Dr. Roland Bowles of LaRC and Herbrt Schlickenmaier of the FAA. The purpose of the meeting was to transfer significant, ongoing results gained during the second year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

  14. Airborne Wind Shear Detection and Warning Systems. Fourth Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

    1992-01-01

    The Fourth Combined Manufacturers' and Technologists' Conference was hosted jointly by NASA Langley Research Center (LaRC) and the Federal Aviation Administration (FAA) in Williamsburg, Virginia, on April 14-16, 1992. The meeting was co-chaired by Dr. Roland Bowles of LaRC and Bob Passman of the FAA. The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA Joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document has been compiled to record the essence of the technology updates and discussions which follow each.

  15. Embedding Agile Practices within a Plan-Driven Hierarchical Project Life Cycle

    SciTech Connect

    Millard, W. David; Johnson, Daniel M.; Henderson, John M.; Lombardo, Nicholas J.; Bass, Robert B.; Smith, Jason E.

    2014-07-28

    Organizations use structured, plan-driven approaches to provide continuity, direction, and control to large, multi-year programs. Projects within these programs vary greatly in size, complexity, level of maturity, technical risk, and clarity of the development objectives. Organizations that perform exploratory research, evolutionary development, and other R&D activities can obtain the benefits of Agile practices without losing the benefits of their program’s overarching plan-driven structure. This paper describes application of Agile development methods on a large plan-driven sensor integration program. While the client employed plan-driven, requirements flow-down methodologies, tight project schedules and complex interfaces called for frequent end-to-end demonstrations to provide feedback during system development. The development process maintained the many benefits of plan-driven project execution with the rapid prototyping, integration, demonstration, and client feedback possible through Agile development methods. This paper also describes some of the tools and implementing mechanisms used to transition between and take advantage of each methodology, and presents lessons learned from the project management, system engineering, and developer’s perspectives.

  16. Airborne Wind Shear Detection and Warning Systems: Fourth Combined Manufacturers' and Technologists' Conference, part 1

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

    1992-01-01

    The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document was compiled to record the essence of the technology updates and discussions which follow each.

  17. High Efficiency Integrated Space Conditioning, Water Heating and Air Distribution System for HUD-Code Manufactured Housing

    SciTech Connect

    Henry DeLima; Joe Akin; Joseph Pietsch

    2008-09-14

    Recognizing the need for new space conditioning and water heating systems for manufactured housing, DeLima Associates assembled a team to develop a space conditioning system that would enhance comfort conditions while also reducing energy usage at the systems level. The product, Comboflair® was defined as a result of a needs analysis of project sponsors and industry stakeholders. An integrated system would be developed that would combine a packaged airconditioning system with a small-duct, high-velocity air distribution system. In its basic configuration, the source for space heating would be a gas water heater. The complete system would be installed at the manufactured home factory and would require no site installation work at the homesite as is now required with conventional split-system air conditioners. Several prototypes were fabricated and tested before a field test unit was completed in October 2005. The Comboflair® system, complete with ductwork, was installed in a 1,984 square feet, double-wide manufactured home built by Palm Harbor Homes in Austin, TX. After the home was transported and installed at a Palm Harbor dealer lot in Austin, TX, a data acquisition system was installed for remote data collection. Over 60 parameters were continuously monitored and measurements were transmitted to a remote site every 15 minutes for performance analysis. The Comboflair® system was field tested from February 2006 until April 2007. The cooling system performed in accordance with the design specifications. The heating system initially could not provide the needed capacity at peak heating conditions until the water heater was replaced with a higher capacity standard water heater. All system comfort goals were then met. As a result of field testing, we have identified improvements to be made to specific components for incorporation into production models. The Comboflair® system will be manufactured by Unico, Inc. at their new production facility in St. Louis

  18. Lean manufacturing and Toyota Production System terminology applied to the procurement of vascular stents in interventional radiology.

    PubMed

    de Bucourt, Maximilian; Busse, Reinhard; Güttler, Felix; Wintzer, Christian; Collettini, Federico; Kloeters, Christian; Hamm, Bernd; Teichgräber, Ulf K

    2011-08-01

    OBJECTIVES: To apply the economic terminology of lean manufacturing and the Toyota Production System to the procurement of vascular stents in interventional radiology. METHODS: The economic- and process-driven terminology of lean manufacturing and the Toyota Production System is first presented, including information and product flow as well as value stream mapping (VSM), and then applied to an interdisciplinary setting of physicians, nurses and technicians from different medical departments to identify wastes in the process of endovascular stent procurement in interventional radiology. RESULTS: Using the so-called seven wastes approach of the Toyota Production System (waste of overproducing, waiting, transport, processing, inventory, motion and waste of defects and spoilage) as well as further waste characteristics (gross waste, process and method waste, and micro waste), wastes in the process of endovascular stent procurement in interventional radiology were identified and eliminated to create an overall smoother process from the procurement as well as from the medical perspective. CONCLUSION: Economic terminology of lean manufacturing and the Toyota Production System, especially VSM, can be used to visualise and better understand processes in the procurement of vascular stents in interventional radiology from an economic point of view.

  19. Manufacturing technologies

    NASA Astrophysics Data System (ADS)

    The Manufacturing Technologies Center is at the core of Sandia National Laboratories' advanced manufacturing effort which spans the entire product realization process. The center's capabilities in product and process development are summarized in the following disciplines: (1) mechanical - rapid prototyping, manufacturing engineering, machining and computer-aided manufacturing, measurement and calibration, and mechanical and electronic manufacturing liaison; (2) electronics - advanced packaging for microelectronics, printed circuits, and electronic fabrication; and (3) materials - ceramics, glass, thin films, vacuum technology, brazing, polymers, adhesives, composite materials, and process analysis.

  20. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The NASA/McDonnell Douglas Corporation (MDC) X-36 Tailless Fighter Agility Research Aircraft is steered to it's hangar at NASA Dryden Flight Research Center, Edwards, California, following arrival on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1,250 pounds. It was 19 feet long and three feet high with a