Science.gov

Sample records for agile product line

  1. Software Product Line Engineering Approach for Enhancing Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Martinez, Jabier; Diaz, Jessica; Perez, Jennifer; Garbajosa, Juan

    One of the main principles of Agile methodologies consists in the early and continuous delivery of valuable software by short time-framed iterations. After each iteration, a working product is delivered according to the requirements defined at the beginning of the iteration. Testing tools facilitate the task of checking if the system provides the expected behavior according to the specified requirements. However, since testing tools need to be adapted in order to test new working products in each iteration, a significant effort has to be invested. This work presents a Software Product Line Engineering (SPLE) approach that allows flexibility in the adaption of testing tools with the working products in an iterative way. A case study is also presented using PLUM (Product Line Unified Modeller) as the tool suite for SPL implementation and management.

  2. Agility and mixed-model furniture production

    NASA Astrophysics Data System (ADS)

    Yao, Andrew C.

    2000-10-01

    The manufacture of upholstered furniture provides an excellent opportunity to analyze the effect of a comprehensive communication system on classical production management functions. The objective of the research is to study the scheduling heuristics that embrace the concepts inherent in MRP, JIT and TQM while recognizing the need for agility in a somewhat complex and demanding environment. An on-line, real-time data capture system provides the status and location of production lots, components, subassemblies for schedule control. Current inventory status of raw material and purchased items are required in order to develop and adhere to schedules. For the large variety of styles and fabrics customers may order, the communication system must provide timely, accurate and comprehensive information for intelligent decisions with respect to the product mix and production resources.

  3. Developing communications requirements for Agile Product Realization

    SciTech Connect

    Forsythe, C.; Ashby, M.R.

    1994-03-01

    Sandia National Laboratories has undertaken the Agile Product Realization for Innovative electroMEchanical Devices (A-PRIMED) pilot project to develop and implement technologies for agile design and manufacturing of electrochemical components. Emphasis on information-driven processes, concurrent engineering and multi-functional team communications makes computer-supported cooperative work critical to achieving significantly faster product development cycles. This report describes analyses conducted in developing communications requirements and a communications plan that addresses the unique communications demands of an agile enterprise.

  4. Agile

    NASA Technical Reports Server (NTRS)

    Trimble, Jay Phillip

    2013-01-01

    This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.

  5. Integrated product definition representation for agile numerical control applications

    SciTech Connect

    Simons, W.R. Jr.; Brooks, S.L.; Kirk, W.J. III; Brown, C.W.

    1994-11-01

    Realization of agile manufacturing capabilities for a virtual enterprise requires the integration of technology, management, and work force into a coordinated, interdependent system. This paper is focused on technology enabling tools for agile manufacturing within a virtual enterprise specifically relating to Numerical Control (N/C) manufacturing activities and product definition requirements for these activities.

  6. Pathways to agility in the production of neutron generators

    SciTech Connect

    Stoltz, R.E.; Beavis, L.C.; Cutchen, J.T.; Garcia, P.; Gurule, G.A.; Harris, R.N.; McKey, P.C.; Williams, D.W.

    1994-02-01

    This report is the result of a study team commissioned to explore pathways for increased agility in the manufacture of neutron generators. As a part of Sandia`s new responsibility for generator production, the goal of the study was to identify opportunities to reduce costs and increase flexibility in the manufacturing operation. Four parallel approaches (or pathways) were recommended: (1) Know the goal, (2) Use design leverage effectively, (3) Value simplicity, and (4) Configure for flexibility. Agility in neutron generator production can be enhanced if all of these pathways are followed. The key role of the workforce in achieving agility was also noted, with emphasis on ownership, continuous learning, and a supportive environment.

  7. Production planning tools and techniques for agile manufacturing

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Turnquist, M.A.

    1996-10-01

    Effective use of resources shared among multiple products or processes is critical for agile manufacturing. This paper describes development and implementation of a computerized model to support production planning in a complex manufacturing system at Pantex Plant. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints, and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

  8. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-09-01

    This paper describes a product realization process developed and demonstrated at Sandia by the A-PRIMED (Agile Product Realization for Innovative Electro MEchanical Devices) project that integrates many of the key components of ``agile manufacturing`` into a complete, design-to-production process. Evidence indicates that the process has reduced the product realization cycle and assured product quality. Products included discriminators for a robotic quick change adapter and for an electronic defense system. These discriminators, built using A-PRIMED, met random vibration requirements and had life cycles that far surpass the performance obtained from earlier efforts.

  9. Lean Production as Promoter of Thinkers to Achieve Companies' Agility

    ERIC Educational Resources Information Center

    Alves, Anabela C.; Dinis-Carvalho, Jose; Sousa, Rui M.

    2012-01-01

    Purpose: This paper aims to explore the lean production paradigm as promoter of workers' creativity and thinking potential, and recognize this human potential as a fundamental asset for companies' growth and success, being a major factor to face the disturbing and unpredictable needs of current markets, providing companies with the necessary…

  10. A process for the agile product realization of electromechanical devices (A-primed)

    SciTech Connect

    Forsythe, C.; Ashby, M.R.; Benavides, G.L.; Diegert, K.V.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1996-02-01

    This paper describes a product realization process developed at Sandia National Laboratories by the A-PRIMED project that integrates many of the key components of ``agile manufacturing`` (Nagel & Dove, 1992) into a complete, step-by-step, design-to-production process. For two separate product realization efforts, each geared to a different set of requirements, A-PRIMED demonstrated product realization of a custom device in less than a month. A-PRIMED used a discriminator (a precision electro mechanical device) as the demonstration device, but the process is readily adaptable to other electro mechanical products. The process begins with a qualified design parameter space (Diegert et al, 1995). From that point, the product realization process encompasses all facets of requirements development, analysis and testing, design, manufacturing, robot assembly and quality assurance, as well as product data management and concurrent engineering. In developing the product realization process, A-PRIMED employed an iterative approach whereby after each build, the process was reviewed and refinements were made on the basis of lessons learned. This paper describes the integration of project functions and product realization technologies to develop a product realization process that on repeated iterations, was proven successful.

  11. A process for the agile product realization of electro-mechanical devices

    SciTech Connect

    Forsythe, C.; Diegert, K.V.; Ashby, M.R.; Parratt, S.W.; Benavides, G.L.; Jones, R.E.; Longcope, D.B.

    1995-08-01

    This paper describes a product realization process developed at Sandia National Laboratories by the A-PRIMED project that integrates many of the key components of ``agile manufacturing`` into a complete, step-by-step, design-to-production process. For three separate product realization efforts, each geared to a different set of requirements, A-PRIMED demonstrated product realization of a custom device in less than a month. A-PRIMED used a discriminator (a precision electro-mechanical device) as the demonstration device, but the process is readily adaptable to other electro-mechanical products. The process begins with a qualified design parameter space. From that point, the product realization process encompasses all facets of requirements development, analysis and testing, design, manufacturing, robotic assembly and quality assurance, as well as product data management and concurrent engineering. In developing the product realization process, A-PRIMED employed an iterative approach whereby after each of three builds, the process was reviewed and refinements made on the basis of lessons learned. This paper describes the integration of project functions and product realization technologies, with references to reports detailing specific facets of the overall process. The process described herein represents the outcome of an empirically-based process development effort that on repeated iterations, was proven successful.

  12. Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

    NASA Astrophysics Data System (ADS)

    Song, Young-Joo; Woo, Jong-Hun; Shin, Jong-Gye

    2011-09-01

    Recently, the speed of change related with enterprise management is getting faster than ever owing to the competition among companies, technique diffusion, shortening of product lifecycle, excessive supply of market. For the example, the compliance condition (such as delivery date, product quality, etc.) from the ship owner is getting complicated and the needs for the new product such as FPSO, FSRU are coming to fore. This paradigm shift emphasize the rapid response rather than the competitive price, flexibility and agility rather than effective and optimal perspective for the domestic shipbuilding company. So, domestic shipbuilding companies have to secure agile and flexible ship production environment that could respond change of market and requirements of customers in order to continue a competitive edge in the world market. In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

  13. Product lines in hospitals.

    PubMed

    Weber, J R

    1986-01-01

    The findings presented in the case study demonstrate that financial analysis is only as valid as the assumptions it is based upon. The single most important task is the definition of the clinical product. All other associated data is suspect and can lead to serious errors in business decisions if the product is poorly defined. A comprehensive case mix system, integrated with other financial systems with flexible reporting capabilities is required. The hospital and physicians must be willing to invest the time and expense necessary to ensure that the data is reliable. The hospital must be prudent in determining what cost finding approach they will elect to use. Although the RCC method has some fundamental problems, care must be taken not to develop a cost system that will require a significant amount of effort to maintain. PMID:10311387

  14. Off-Line Catalog Production.

    ERIC Educational Resources Information Center

    OCLC Online Computer Library Center, Inc., Dublin, OH.

    The Ohio College Library Center's off-line catalog system is a limited technique for production of card catalogs. Unlike the on-line system, it cannotmake the resources of a region available to users in an individual institution, and it does not have the potential for significantly reducing rate of rise of library per-unit costs. In short, it is…

  15. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  16. Agile manufacturing prototyping system (AMPS)

    SciTech Connect

    Garcia, P.

    1998-05-09

    The Agile Manufacturing Prototyping System (AMPS) is being integrated at Sandia National Laboratories. AMPS consists of state of the industry flexible manufacturing hardware and software enhanced with Sandia advancements in sensor and model based control; automated programming, assembly and task planning; flexible fixturing; and automated reconfiguration technology. AMPS is focused on the agile production of complex electromechanical parts. It currently includes 7 robots (4 Adept One, 2 Adept 505, 1 Staubli RX90), conveyance equipment, and a collection of process equipment to form a flexible production line capable of assembling a wide range of electromechanical products. This system became operational in September 1995. Additional smart manufacturing processes will be integrated in the future. An automated spray cleaning workcell capable of handling alcohol and similar solvents was added in 1996 as well as parts cleaning and encapsulation equipment, automated deburring, and automated vision inspection stations. Plans for 1997 and out years include adding manufacturing processes for the rapid prototyping of electronic components such as soldering, paste dispensing and pick-and-place hardware.

  17. Human factors in agile manufacturing

    SciTech Connect

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  18. Developments in Agile Manufacturing

    SciTech Connect

    Clinesmith, M.G.

    1993-09-01

    As part of a project design initiative, Sandia National Laboratories and AlliedSignal Inc. Kansas City Division have joined efforts to develop a concurrent engineering capability for the manufacturing of complex precision components. The primary effort of this project, called Agile Manufacturing, is directed toward: (1) Understand the error associated with manufacturing and inspection. (2) Develop methods for correcting error. (3) Integrate diverse software technologies into a compatible process. The Agile Manufacturing System (AMS) is a system that integrates product design, manufacturing, and inspection into a closed loop, concurrent engineering process. The goal of developing the Agile Manufacturing System is to: (1) Optimize accuracy in manufacturing and inspection. (A) Use of softgage software for product evaluation. This will ensure ANSI Y14.5 compliance. (B) Establish and monitor bias between CMM and machine center. (C) Map probe deflection error and apply correction to inspection results. This applies to both on machine probing and CMM inspections. (D) Inspection process. (2) Compress the cycle time from product concept to production level manufacturing and verification. (3) Create a self-correcting process that feeds inspection results back into the machining process. (4) Link subordinate processes (cutting/probing path, softgage model, etc.) to the solid model definition.

  19. AGILE Data Center and AGILE science highlights

    NASA Astrophysics Data System (ADS)

    Pittori, C.

    2013-06-01

    AGILE is a scientific mission of the Italian Space Agency (ASI) with INFN, INAF e CIFS participation, devoted to gamma-ray astrophysics. The satellite is in orbit since April 23rd, 2007. Gamma-ray astrophysics above 100 MeV is an exciting field of astronomical sciences that has received a strong impulse in recent years. Despite the small size and budget, AGILE produced several important scientific results, among which the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula. This discovery won to the AGILE PI and the AGILE Team the prestigious Bruno Rossi Prize for 2012, an international recognition in the field of high energy astrophysics. We present here the AGILE data center main activities, and we give an overview of the AGILE scientific highlights after 5 years of operations.

  20. Some Findings Concerning Requirements in Agile Methodologies

    NASA Astrophysics Data System (ADS)

    Rodríguez, Pilar; Yagüe, Agustín; Alarcón, Pedro P.; Garbajosa, Juan

    Agile methods have appeared as an attractive alternative to conventional methodologies. These methods try to reduce the time to market and, indirectly, the cost of the product through flexible development and deep customer involvement. The processes related to requirements have been extensively studied in literature, in most cases in the frame of conventional methods. However, conclusions of conventional methodologies could not be necessarily valid for Agile; in some issues, conventional and Agile processes are radically different. As recent surveys report, inadequate project requirements is one of the most conflictive issues in agile approaches and better understanding about this is needed. This paper describes some findings concerning requirements activities in a project developed under an agile methodology. The project intended to evolve an existing product and, therefore, some background information was available. The major difficulties encountered were related to non-functional needs and management of requirements dependencies.

  1. Agile manufacturing from a statistical perspective

    SciTech Connect

    Easterling, R.G.

    1995-10-01

    The objective of agile manufacturing is to provide the ability to quickly realize high-quality, highly-customized, in-demand products at a cost commensurate with mass production. More broadly, agility in manufacturing, or any other endeavor, is defined as change-proficiency; the ability to thrive in an environment of unpredictable change. This report discusses the general direction of the agile manufacturing initiative, including research programs at the National Institute of Standards and Technology (NIST), the Department of Energy, and other government agencies, but focuses on agile manufacturing from a statistical perspective. The role of statistics can be important because agile manufacturing requires the collection and communication of process characterization and capability information, much of which will be data-based. The statistical community should initiate collaborative work in this important area.

  2. PHOENIX: the production line for science data products at ESO

    NASA Astrophysics Data System (ADS)

    Hanuschik, Reinhard

    2015-12-01

    In the past two years ESO has installed a production line for level 2 science data products. Focussing on spectroscopic observations, these in-house generated data products are complementary to the externally provided data products from the imaging surveys. The production line combines mass production (more than one million spectra have been generated so far), previews, and quality control.

  3. Agility enabled by the SEMATECH CIM framework

    NASA Astrophysics Data System (ADS)

    Hawker, Scott; Waskiewicz, Fred

    1997-01-01

    The survivor in today's market environment is agile: able to survive and thrive in a market place marked by rapid, continuous change. For manufacturers, this includes an ability to rapidly develop, deploy and reconfigure manufacturing information and control systems. The SEMATECH CIM framework defines an application integration architecture and standard application components that enable agile manufacturing information and control systems. Further, the CIM framework and its evolution process foster virtual organizations of suppliers and manufacturers, combining their products and capabilities into an agile manufacturing information and control system.

  4. Agile manufacturing concept

    NASA Astrophysics Data System (ADS)

    Goldman, Steven L.

    1994-03-01

    The initial conceptualization of agile manufacturing was the result of a 1991 study -- chaired by Lehigh Professor Roger N. Nagel and California-based entrepreneur Rick Dove, President of Paradigm Shifts, International -- of what it would take for U.S. industry to regain global manufacturing competitiveness by the early twenty-first century. This industry-led study, reviewed by senior management at over 100 companies before its release, concluded that incremental improvement of the current system of manufacturing would not be enough to be competitive in today's global marketplace. Computer-based information and production technologies that were becoming available to industry opened up the possibility of an altogether new system of manufacturing, one that would be characterized by a distinctive integration of people and technologies; of management and labor; of customers, producers, suppliers, and society.

  5. An introduction to product line management.

    PubMed

    1991-01-01

    Management by product line has been used successfully in the manufacturing industry for decades. As the healthcare industry evolves, implementation of Product Line Management is emerging as one strategy to increase efficiency, effectiveness, and profitability. Product Line Management is an organizational scheme and alternative management system for focusing on the programmatic scope of operations in order to achieve particular objectives. Product Line Management in a hospital setting requires deviation from linear functional management paradigms to a reorganization in thinking that focuses on end-result objectives. This management structure recognizes the need to integrate operational and clinical management in response to market-driven forces from both the standpoint of packaging products for the marketplace and appropriate management of those products to improve organizational effectiveness and profitability. However, a "test of time" is necessary to evaluate whether Product Line Management has a positive impact on clinical intervention and outcome. Although Product Line Management seems to be a method to increase profitability, its effect on the quality of client care remains unclear. Speech-language pathologists and audiologists need to be well informed about Product Line Management in the healthcare industry, and should prepare for the possibility of participating within such a framework. Finally, speech-language pathologists and audiologists need to examine and consider their particular qualifications for assuming leadership within such a structure. PMID:2001266

  6. Agile manufacturing concepts and opportunities in ceramics

    SciTech Connect

    Booth, C.L.; Harmer, M.P.

    1995-08-01

    In 1991 Lehigh University facilitated seminars over a period of 8 months to define manufacturing needs for the 21st century. They concluded that the future will be characterized by rapid changes in technology advances, customer demands, and shifts in market dynamics and coined the term {open_quotes}Agile Manufacturing{close_quotes}. Agile manufacturing refers to the ability to thrive in an environment of constant unpredictable change. Market opportunities are attacked by partnering to form virtual firms to dynamically obtain the required skills for each product opportunity. This paper will describe and compare agile vs. traditional concepts of organization & structure, management policy and ethics, employee environment, product focus, information, and paradigm shift. Examples of agile manufacturing applied to ceramic materials will be presented.

  7. Agile Software Development

    ERIC Educational Resources Information Center

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  8. SuperAGILE Services at ASDC

    SciTech Connect

    Preger, B.; Verrecchia, F.; Pittori, C.; Antonelli, L. A.; Giommi, P.; Lazzarotto, F.; Evangelista, Y.

    2008-05-22

    The Italian Space Agency Science Data Center (ASDC) is a facility with several responsibilities including support to all the ASI scientific missions as for management and archival of the data, acting as the interface between ASI and the scientific community and providing on-line access to the data hosted. In this poster we describe the services that ASDC provides for SuperAGILE, in particular the ASDC public web pages devoted to the dissemination of SuperAGILE scientific results. SuperAGILE is the X-Ray imager onboard the AGILE mission, and provides the scientific community with orbit-by-orbit information on the observed sources. Crucial source information including position and flux in chosen energy bands will be reported in the SuperAGILE public web page at ASDC. Given their particular interest, another web page will be dedicated entirely to GRBs and other transients, where new event alerts will be notified and where users will find all the available informations on the GRBs detected by SuperAGILE.

  9. Agile automated vision

    NASA Astrophysics Data System (ADS)

    Fandrich, Juergen; Schmitt, Lorenz A.

    1994-11-01

    The microelectronic industry is a protagonist in driving automated vision to new paradigms. Today semiconductor manufacturers use vision systems quite frequently in their fabs in the front-end process. In fact, the process depends on reliable image processing systems. In the back-end process, where ICs are assembled and packaged, today vision systems are only partly used. But in the next years automated vision will become compulsory for the back-end process as well. Vision will be fully integrated into every IC package production machine to increase yields and reduce costs. Modem high-speed material processing requires dedicated and efficient concepts in image processing. But the integration of various equipment in a production plant leads to unifying handling of data flow and interfaces. Only agile vision systems can act with these contradictions: fast, reliable, adaptable, scalable and comprehensive. A powerful hardware platform is a unneglectable requirement for the use of advanced and reliable, but unfortunately computing intensive image processing algorithms. The massively parallel SIMD hardware product LANTERN/VME supplies a powerful platform for existing and new functionality. LANTERN/VME is used with a new optical sensor for IC package lead inspection. This is done in 3D, including horizontal and coplanarity inspection. The appropriate software is designed for lead inspection, alignment and control tasks in IC package production and handling equipment, like Trim&Form, Tape&Reel and Pick&Place machines.

  10. On-line gas chromatographic analysis of higher alcohol synthesis products from syngas.

    PubMed

    Andersson, Robert; Boutonnet, Magali; Järås, Sven

    2012-07-20

    An on-line gas chromatographic (GC) system has been developed for rapid and accurate product analysis in catalytic conversion of syngas (a mixture of H₂ and CO) to alcohols, so called "higher alcohol synthesis (HAS)". Conversion of syngas to higher alcohols is an interesting second step in the route of converting coal, natural gas and possibly biomass to liquid alcohol fuel and chemicals. The presented GC system and method are developed for analysis of the products formed from syngas using alkali promoted MoS₂ catalysts, however it is not limited to these types of catalysts. During higher alcohol synthesis not only the wanted short alcohols (∼C₂-C₅) are produced, but also a great number of other products in smaller or greater amounts, they are mainly short hydrocarbons (olefins, paraffins, branched, non-branched), aldehydes, esters and ketones as well as CO₂, H₂O. Trace amounts of sulfur-containing compounds can also be found in the product effluent when sulfur-containing catalysts are used and/or sulfur-containing syngas is feed. In the presented GC system, most of them can be separated and analyzed within 60 min without the use of cryogenic cooling. Previously, product analysis in "higher alcohol synthesis" has in most cases been carried out partly on-line and partly off-line, where the light gases (gases at room temp) are analyzed on-line and liquid products (liquid at room temp) are collected in a trap for later analysis off-line. This method suffers from many drawbacks compared to a complete on-line GC system. In this paper an on-line system using an Agilent 7890 gas chromatograph equipped with two flame ionization detectors (FID) and a thermal conductivity detector (TCD), together with an Agilent 6890 with sulfur chemiluminescence dual plasma detector (SCD) is presented. A two-dimensional GC system with Deans switch (heart-cut) and two capillary columns (HP-FFAP and HP-Al₂O₃) was used for analysis of the organic products on the FIDs. Light

  11. Agile robotic edge finishing system research

    SciTech Connect

    Powell, M.A.

    1995-07-01

    This paper describes a new project undertaken by Sandia National Laboratories to develop an agile, automated, high-precision edge finishing system. The project has a two-year duration and was initiated in October, 1994. This project involves re-designing and adding additional capabilities to an existing finishing workcell at Sandia; and developing intelligent methods for automating process definition and for controlling finishing processes. The resulting system will serve as a prototype for systems that will be deployed into highly flexible automated production lines. The production systems will be used to produce a wide variety of products with limited production quantities and quick turnaround requirements. The prototype system is designed to allow programming, process definition, fixture re-configuration, and process verification to be performed off-line for new products. CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) models of the part will be used to assist with the automated process development and process control tasks. To achieve Sandia`s performance goals, the system will be employ advanced path planning, burr prediction expert systems, automated process definition, statistical process models in a process database, and a two-level control scheme using hybrid position-force control and fuzzy logic control. In this paper, we discuss the progress and the planned system development under this project.

  12. Soliton production with nonlinear homogeneous lines

    SciTech Connect

    Elizondo-Decanini, Juan M.; Coleman, Phillip D.; Moorman, Matthew W.; Petney, Sharon Joy Victor; Dudley, Evan C.; Youngman, Kevin; Penner, Tim Dwight; Fang, Lu; Myers, Katherine M.

    2015-11-24

    Low- and high-voltage Soliton waves were produced and used to demonstrate collision and compression using diode-based nonlinear transmission lines. Experiments demonstrate soliton addition and compression using homogeneous nonlinear lines. We built the nonlinear lines using commercially available diodes. These diodes are chosen after their capacitance versus voltage dependence is used in a model and the line design characteristics are calculated and simulated. Nonlinear ceramic capacitors are then used to demonstrate high-voltage pulse amplification and compression. The line is designed such that a simple capacitor discharge, input signal, develops soliton trains in as few as 12 stages. We also demonstrated output voltages in excess of 40 kV using Y5V-based commercial capacitors. The results show some key features that determine efficient production of trains of solitons in the kilovolt range.

  13. Soliton production with nonlinear homogeneous lines

    DOE PAGESBeta

    Elizondo-Decanini, Juan M.; Coleman, Phillip D.; Moorman, Matthew W.; Petney, Sharon Joy Victor; Dudley, Evan C.; Youngman, Kevin; Penner, Tim Dwight; Fang, Lu; Myers, Katherine M.

    2015-11-24

    Low- and high-voltage Soliton waves were produced and used to demonstrate collision and compression using diode-based nonlinear transmission lines. Experiments demonstrate soliton addition and compression using homogeneous nonlinear lines. We built the nonlinear lines using commercially available diodes. These diodes are chosen after their capacitance versus voltage dependence is used in a model and the line design characteristics are calculated and simulated. Nonlinear ceramic capacitors are then used to demonstrate high-voltage pulse amplification and compression. The line is designed such that a simple capacitor discharge, input signal, develops soliton trains in as few as 12 stages. We also demonstrated outputmore » voltages in excess of 40 kV using Y5V-based commercial capacitors. The results show some key features that determine efficient production of trains of solitons in the kilovolt range.« less

  14. The Future of Product Line Development at NASA

    NASA Technical Reports Server (NTRS)

    Lutz, Robyn R.

    2006-01-01

    This viewgraph presentation reviews NASA's software production in the light of a product line similar to a commercial product line. The authors propose to identify, investigate, evaluate and apply product-line engineering techniques to NASA's product lines in order to improve the timeliness, robustness and effectiveness of these future systems.

  15. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that ``competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.`` Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  16. Enterprise Technologies Deployment for Agile Manufacturing

    SciTech Connect

    Neal, R.E.

    1992-11-01

    This report is intended for high-level technical planners who are responsible for planning future developments for their company or Department of Energy/Defense Programs (DOE/DP) facilities. On one hand, the information may be too detailed or contain too much manufacturing technology jargon for a high-level, nontechnical executive, while at the same time an expert in any of the four infrastructure fields (Product Definition/Order Entry, Planning and Scheduling, Shop Floor Management, and Intelligent Manufacturing Systems) will know more than is conveyed here. The purpose is to describe a vision of technology deployment for an agile manufacturing enterprise. According to the 21st Century Manufacturing Enterprise Strategy, the root philosophy of agile manufacturing is that competitive advantage in the new systems will belong to agile manufacturing enterprises, capable of responding rapidly to demand for high-quality, highly customized products.'' Such agility will be based on flexible technologies, skilled workers, and flexible management structures which collectively will foster cooperative initiatives in and among companies. The remainder of this report is dedicated to sharpening our vision and to establishing a framework for defining specific project or pre-competitive project goals which will demonstrate agility through technology deployment.

  17. An agile implementation of SCRUM

    NASA Astrophysics Data System (ADS)

    Gannon, Michele

    Is Agile a way to cut corners? To some, the use of an Agile Software Development Methodology has a negative connotation - “ Oh, you're just not producing any documentation” . So can a team with no experience in Agile successfully implement and use SCRUM?

  18. Achieving agility through parameter space qualification

    SciTech Connect

    Diegert, K.V.; Easterling, R.G.; Ashby, M.R.; Benavides, G.L.; Forsythe, C.; Jones, R.E.; Longcope, D.B.; Parratt, S.W.

    1995-02-01

    The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.

  19. Peridigm summary report : lessons learned in development with agile components.

    SciTech Connect

    Salinger, Andrew Gerhard; Mitchell, John Anthony; Littlewood, David John; Parks, Michael L.

    2011-09-01

    This report details efforts to deploy Agile Components for rapid development of a peridynamics code, Peridigm. The goal of Agile Components is to enable the efficient development of production-quality software by providing a well-defined, unifying interface to a powerful set of component-based software. Specifically, Agile Components facilitate interoperability among packages within the Trilinos Project, including data management, time integration, uncertainty quantification, and optimization. Development of the Peridigm code served as a testbed for Agile Components and resulted in a number of recommendations for future development. Agile Components successfully enabled rapid integration of Trilinos packages into Peridigm. A cost of this approach, however, was a set of restrictions on Peridigm's architecture which impacted the ability to track history-dependent material data, dynamically modify the model discretization, and interject user-defined routines into the time integration algorithm. These restrictions resulted in modifications to the Agile Components approach, as implemented in Peridigm, and in a set of recommendations for future Agile Components development. Specific recommendations include improved handling of material states, a more flexible flow control model, and improved documentation. A demonstration mini-application, SimpleODE, was developed at the onset of this project and is offered as a potential supplement to Agile Components documentation.

  20. CT-assisted agile manufacturing

    NASA Astrophysics Data System (ADS)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  1. Perspectives on Agile Coaching

    NASA Astrophysics Data System (ADS)

    Fraser, Steven; Lundh, Erik; Davies, Rachel; Eckstein, Jutta; Larsen, Diana; Vilkki, Kati

    There are many perspectives to agile coaching including: growing coaching expertise, selecting the appropriate coach for your context; and eva luating value. A coach is often an itinerant who may observe, mentor, negotiate, influence, lead, and/or architect everything from team organization to system architecture. With roots in diverse fields ranging from technology to sociology coaches have differing motivations and experience bases. This panel will bring together coaches to debate and discuss various perspectives on agile coaching. Some of the questions to be addressed will include: What are the skills required for effective coaching? What should be the expectations for teams or individu als being coached? Should coaches be: a corporate resource (internal team of consultants working with multiple internal teams); an integral part of a specific team; or external contractors? How should coaches exercise influence and au thority? How should management assess the value of a coaching engagement? Do you have what it takes to be a coach? - This panel will bring together sea soned agile coaches to offer their experience and advice on how to be the best you can be!

  2. Special steel production on common carbon steel production line

    NASA Astrophysics Data System (ADS)

    Pi, Huachun; Han, Jingtao; Hu, Haiping; Bian, Ruisheng; Kang, Jianjun; Xu, Manlin

    2004-06-01

    The equipment and technology of small bar tandem rolling line of Shijiazhuang Iron & Steel Co. in China has reached the 90's international advanced level in the 20th century, but products on the line are mostly of common carbon steel. Currently there are few steel plants in China to produce 45 steel bars for cold drawing, which is a kind of shortage product. Development of 45 steel for cold drawing has a wide market outlook in China. In this paper, continuous cooling transformation (CCT) curve of 45 steel for cold drawing used for rolling was set out first. According to the CCT curve, we determined some key temperature points such as Ac3 temperature and Ac1 temperature during the cooling procedure and discussed the precipitation microstructure at different cooling rate. Then by studying thermal treatment process of 45 steel bars for cold drawing, the influence of cooling time on microstructure was analyzed and the optimum cooling speed has been found. All results concluded from the above studies are the basis of regulating controlled cooling process of 45 steel bars for cold drawing. Finally, the feasible production process of 45 steel bars for cold drawing on common carbon steel production line combined with the field condition was recommended.

  3. Agile rediscovering values: Similarities to continuous improvement strategies

    NASA Astrophysics Data System (ADS)

    Díaz de Mera, P.; Arenas, J. M.; González, C.

    2012-04-01

    Research in the late 80's on technological companies that develop products of high value innovation, with sufficient speed and flexibility to adapt quickly to changing market conditions, gave rise to the new set of methodologies known as Agile Management Approach. In the current changing economic scenario, we considered very interesting to study the similarities of these Agile Methodologies with other practices whose effectiveness has been amply demonstrated in both the West and Japan. Strategies such as Kaizen, Lean, World Class Manufacturing, Concurrent Engineering, etc, would be analyzed to check the values they have in common with the Agile Approach.

  4. On-line tritium production monitor

    DOEpatents

    Mihalczo, John T.

    1993-01-01

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched .sup.6 Li and connected to standard scintillation counter circuitry. A neutron generated .sup.6 Li(n )T reaction occurs in the coated surface of .sup.6 Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers.

  5. On-line tritium production monitor

    DOEpatents

    Mihalczo, J.T.

    1993-11-23

    A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched {sup 6}Li and connected to standard scintillation counter circuitry. A neutron generated {sup 6}Li(n)T reaction occurs in the coated surface of {sup 6}Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers. 5 figures.

  6. Agile Walking Robot

    NASA Technical Reports Server (NTRS)

    Larimer, Stanley J.; Lisec, Thomas R.; Spiessbach, Andrew J.; Waldron, Kenneth J.

    1990-01-01

    Proposed agile walking robot operates over rocky, sandy, and sloping terrain. Offers stability and climbing ability superior to other conceptual mobile robots. Equipped with six articulated legs like those of insect, continually feels ground under leg before applying weight to it. If leg sensed unexpected object or failed to make contact with ground at expected point, seeks alternative position within radius of 20 cm. Failing that, robot halts, examines area around foot in detail with laser ranging imager, and replans entire cycle of steps for all legs before proceeding.

  7. Frequency agile relativistic magnetrons

    SciTech Connect

    Levine, J.S.; Harteneck, B.D.; Price, H.D.

    1995-11-01

    The authors are developing a family of frequency agile relativistic magnetrons to continuously cover the bands from 1 to 3 GHz. They have achieved tuning ranges of > 33%. The magnetrons have been operated repetitively in burst mode at rates up to 100 pps for 10 sec. Power is extracted from two resonators, and is in the range of 400--600 MW, fairly flat across the tuning bandwidth. They are using a network of phase shifters and 3-dB hybrids to combine the power into a single arm and to provide a continuously adjustable attenuator.

  8. Agile Infrastructure Monitoring

    NASA Astrophysics Data System (ADS)

    Andrade, P.; Ascenso, J.; Fedorko, I.; Fiorini, B.; Paladin, M.; Pigueiras, L.; Santos, M.

    2014-06-01

    At the present time, data centres are facing a massive rise in virtualisation and cloud computing. The Agile Infrastructure (AI) project is working to deliver new solutions to ease the management of CERN data centres. Part of the solution consists in a new "shared monitoring architecture" which collects and manages monitoring data from all data centre resources. In this article, we present the building blocks of this new monitoring architecture, the different open source technologies selected for each architecture layer, and how we are building a community around this common effort.

  9. Agile manufacturing: The factory of the future

    NASA Technical Reports Server (NTRS)

    Loibl, Joseph M.; Bossieux, Terry A.

    1994-01-01

    The factory of the future will require an operating methodology which effectively utilizes all of the elements of product design, manufacturing and delivery. The process must respond rapidly to changes in product demand, product mix, design changes or changes in the raw materials. To achieve agility in a manufacturing operation, the design and development of the manufacturing processes must focus on customer satisfaction. Achieving greatest results requires that the manufacturing process be considered from product concept through sales. This provides the best opportunity to build a quality product for the customer at a reasonable rate. The primary elements of a manufacturing system include people, equipment, materials, methods and the environment. The most significant and most agile element in any process is the human resource. Only with a highly trained, knowledgeable work force can the proper methods be applied to efficiently process materials with machinery which is predictable, reliable and flexible. This paper discusses the affect of each element on the development of agile manufacturing systems.

  10. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, Stephan P.

    1998-01-01

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy.

  11. Frequency agile optical parametric oscillator

    DOEpatents

    Velsko, S.P.

    1998-11-24

    The frequency agile OPO device converts a fixed wavelength pump laser beam to arbitrary wavelengths within a specified range with pulse to pulse agility, at a rate limited only by the repetition rate of the pump laser. Uses of this invention include Laser radar, LIDAR, active remote sensing of effluents/pollutants, environmental monitoring, antisensor lasers, and spectroscopy. 14 figs.

  12. Aircraft agility maneuvers

    NASA Technical Reports Server (NTRS)

    Cliff, Eugene M.; Thompson, Brian G.

    1992-01-01

    A new dynamic model for aircraft motions is presented. This model can be viewed as intermediate between a point-mass model, in which the body attitude angles are control-like, and a rigid-body model, in which the body-attitude angles evolve according to Newton's Laws. Specifically, consideration is given to the case of symmetric flight, and a model is constructed in which the body roll-rate and the body pitch-rate are the controls. In terms of this body-rate model a minimum-time heading change maneuver is formulated. When the bounds on the body-rates are large the results are similar to the point-mass model in that the model can very quickly change the applied forces and produce an acceleration to turn the vehicle. With finite bounds on these rates, the forces change in a smooth way. This leads to a measurable effect of agility.

  13. Harnessing natural product assembly lines: structure, promiscuity, and engineering.

    PubMed

    Ladner, Christopher C; Williams, Gavin J

    2016-03-01

    Many therapeutically relevant natural products are biosynthesized by the action of giant mega-enzyme assembly lines. By leveraging the specificity, promiscuity, and modularity of assembly lines, a variety of strategies has been developed that enables the biosynthesis of modified natural products. This review briefly summarizes recent structural advances related to natural product assembly lines, discusses chemical approaches to probing assembly line structures in the absence of traditional biophysical data, and surveys efforts that harness the inherent or engineered promiscuity of assembly lines for the synthesis of non-natural polyketides and non-ribosomal peptide analogues. PMID:26527577

  14. Survey of Product-line Verification and Validation Techniques

    NASA Technical Reports Server (NTRS)

    Lutz, Robyn

    2007-01-01

    This report presents the results from the first task of the SARP Center Initiative, 'Product Line Verification of Safety-Critical Software.' Task 1 is a literature survey of available techniques for product line verification and validation. Section 1 of the report provides an introduction to product lines and motivates the survey of verification techniques. It describes what is reused in product-line engineering and explains the goal of verifiable conformance of the developed system to its product-line specifications. Section 2 of the report describes six lifecycle steps in product-line verification and validation. This description is based on, and refers to, the best practices extracted from the readings. It ends with a list of verification challenges for NASA product lines (2.7) and verification enablers for NASA product lines (2.8) derived from the survey. Section 3 provides resource lists of related conferences, workshops, industrial and defense industry experiences and case studies of product lines, and academic/industrial consortiums. Section 4 is a bibliography of papers and tutorials with annotated entries for relevant papers not previously discussed in sections 2 or 3.

  15. Elements of an Art - Agile Coaching

    NASA Astrophysics Data System (ADS)

    Lundh, Erik

    This tutorial gives you a lead on becoming or redefining yourself as an Agile Coach. Introduction to elements and dimensions of state-of-the-art Agile Coaching. How to position the agile coach to be effective in a larger setting. Making the agile transition - from a single team to thousands of people. How to support multiple teams as a coach. How to build a coaches network in your company. Challenges when the agile coach is a consultant and the organization is large.

  16. Technology Management within Product Lines in High Technology Markets

    ERIC Educational Resources Information Center

    Sarangee, Kumar R.

    2009-01-01

    Understanding the nuances of product line management has been of great interest to business scholars and practitioners. This assumes greater significance for firms conducting business in technologically dynamic industries, where they face certain challenges regarding the management of multiple, overlapping technologies within their product lines.…

  17. Informational needs for a product line management system.

    PubMed

    Alfirevic, J; Kroman, B; Ruflin, P

    1987-03-01

    Changing to a product line management structure requires a total dedicated effort from hospital management. The information systems support requirements are diverse and often call for both the further integration of existing capabilities as well as the development of new ones. The reporting structure must address the profit and quality management objectives assigned to both product line and functional managers. A thorough planning and evaluation process that recognizes the institution's unique objectives is the key to successful implementation. This article is the final in a series on product line management in health care. The previous two articles examined the concepts and evolution of product line management and the alternative product line organizational models. PMID:10280835

  18. Software ``Best'' Practices: Agile Deconstructed

    NASA Astrophysics Data System (ADS)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  19. Tools for Supporting Distributed Agile Project Planning

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Maurer, Frank; Morgan, Robert; Oliveira, Josyleuda

    Agile project planning plays an important part in agile software development. In distributed settings, project planning is severely impacted by the lack of face-to-face communication and the inability to share paper index cards amongst all meeting participants. To address these issues, several distributed agile planning tools were developed. The tools vary in features, functions and running platforms. In this chapter, we first summarize the requirements for distributed agile planning. Then we give an overview on existing agile planning tools. We also evaluate existing tools based on tool requirements. Finally, we present some practical advices for both designers and users of distributed agile planning tools.

  20. What Does an Agile Coach Do?

    NASA Astrophysics Data System (ADS)

    Davies, Rachel; Pullicino, James

    The surge in Agile adoption has created a demand for project managers rather than direct their teams. A sign of this trend is the ever-increasing number of people getting certified as scrum masters and agile leaders. Training courses that introduce agile practices are easy to find. But making the transition to coach is not as simple as understanding what agile practices are. Your challenge as an Agile Coach is to support your team in learning how to wield their new Agile tools in creating great software.

  1. Project-Method Fit: Exploring Factors That Influence Agile Method Use

    ERIC Educational Resources Information Center

    Young, Diana K.

    2013-01-01

    While the productivity and quality implications of agile software development methods (SDMs) have been demonstrated, research concerning the project contexts where their use is most appropriate has yielded less definitive results. Most experts agree that agile SDMs are not suited for all project contexts. Several project and team factors have been…

  2. Reliability and maintainability analysis of bread production line.

    PubMed

    Tsarouhas, Panagiotis H; Arvanitoyannis, Ioannis S

    2010-04-01

    The statistical analysis of the bread production line of the failure and repair data at machine and line levels was displayed. The experiment covers a period of twenty-five months. The best fit of the failure data between the common theoretical distributions was found and its parameters were computed. The reliability and hazard rate modes for all machines and the entire production line were calculated as well. The models could prove to be a useful tool to assess the current conditions, and to predict the reliability for upgrading the maintenance policy of the production line. It was pointed out that (a) the availability of the bread production line is 90.74% and went down to 86.76% because the equipment's failures cause an additional production gap in the line, (b) the 53.5% of all failures occurred at the bread machine, cooling tower machine, and volumetric-divider machine, and (c) the machines of the bread production line that displayed increasing hazard rate functions were identified. This analysis will be very useful in terms of identifying the occurring and latent problems in manufacturing process of bread and improve it. PMID:20301018

  3. Piloted simulator assessments of agility

    NASA Technical Reports Server (NTRS)

    Schneider, Edward T.

    1990-01-01

    NASA has utilized piloted simulators for nearly two decades to study high-angle-of-attack flying qualities, agility, and air-to-air combat. These studies have included assessments of an F-16XL aircraft equipped with thrust vectoring, an assessment of the F-18 HARV maneuvering requirements to assist in thrust vectoring control system design, and an agility assessment of the F-18. The F-18 agility assessment was compared with in-flight testing. Open-loop maneuvers such as 180-deg rolls to measure roll rate showed favorable simulator/in-flight comparison. Closed-loop maneuvers such as rolls to 90 deg with precision stops or certain maximum longitudinal pitching maneuvers showed poorer performance due to reduced aggressiveness of pilot inputs in flight to remain within flight envelope limits.

  4. The AGILE Data Center at ASDC

    NASA Astrophysics Data System (ADS)

    Pittori, Carlotta; AGILE Collaboration

    2013-01-01

    AGILE is a Scientific Mission of the Italian Space Agency (ASI) with INFN, INAF and CIFS participation, devoted to gamma-ray astrophysics. The satellite has been in orbit since April 23rd, 2007. Thanks to its sky monitoring capability and fast ground segment alert system, AGILE produced several important scientific results, among which was the unexpected discovery of strong and rapid gamma-ray flares from the Crab Nebula over daily timescales. This discovery won for the AGILE PI and the AGILE Team the Bruno Rossi Prize for 2012. The AGILE Data Center, located at ASDC, is in charge of all the scientific oriented activities related to the analysis and archiving of AGILE data. I will present the AGILE data center main activities, and I will give an overview of the AGILE scientific highlights after 5 years of operations.

  5. Agile Development Methods for Space Operations

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Webster, Chris

    2012-01-01

    Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

  6. Tempest gas turbine extends EGT product line

    SciTech Connect

    Chellini, R.

    1995-07-01

    With the introduction of the 7.8 MW (mechanical output) Tempest gas turbine, ECT has extended the company`s line of its small industrial turbines. The new Tempest machine, featuring a 7.5 MW electric output and a 33% thermal efficiency, ranks above the company`s single-shaft Typhoon gas turbine, rated 3.2 and 4.9 MW, and the 6.3 MW Tornado gas turbine. All three machines are well-suited for use in combined heat and power (CHP) plants, as demonstrated by the fact that close to 50% of the 150 Typhoon units sold are for CHP applications. This experience has induced EGT, of Lincoln, England, to announce the introduction of the new gas turbine prior to completion of the testing program. The present single-shaft machine is expected to be used mainly for industrial trial cogeneration. This market segment, covering the needs of paper mills, hospitals, chemical plants, ceramic industry, etc., is a typical local market. Cogeneration plants are engineered according to local needs and have to be assisted by local organizations. For this reason, to efficiently cover the world market, EGT has selected a number of associates that will receive from Lincoln completely engineered machine packages and will engineer the cogeneration system according to custom requirements. These partners will also assist the customer and dispose locally of the spares required for maintenance operations.

  7. Vaccine production: upstream processing with adherent or suspension cell lines.

    PubMed

    Genzel, Yvonne; Rödig, Jana; Rapp, Erdmann; Reichl, Udo

    2014-01-01

    The production of viral vaccines in cell culture can be accomplished with primary, diploid, or continuous (transformed) cell lines. Each cell line, each virus type, and each vaccine preparation require the specific design of upstream and downstream processing. Media have to be selected as well as production vessels, cultivation conditions, and modes of operation. Many viruses only replicate to high titers in adherently growing cells, but similar to processes established for recombinant protein production, an increasing number of suspension cell lines is being evaluated for future use. Here, we describe key issues to be considered for the establishment of large-scale virus production in bioreactors. As an example upstream processing of cell culture-derived influenza virus production is described in more detail for adherently growing and for suspension cells. In particular, use of serum-containing, serum-free, and chemically defined media as well as choice of cultivation vessel are considered. PMID:24297427

  8. Network configuration management : paving the way to network agility.

    SciTech Connect

    Maestas, Joseph H.

    2007-08-01

    Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, and customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.

  9. Onshore and Offshore Outsourcing with Agility: Lessons Learned

    NASA Astrophysics Data System (ADS)

    Kussmaul, Clifton

    This chapter reflects on case study based an agile distributed project that ran for approximately three years (from spring 2003 to spring 2006). The project involved (a) a customer organization with key personnel distributed across the US, developing an application with rapidly changing requirements; (b) onshore consultants with expertise in project management, development processes, offshoring, and relevant technologies; and (c) an external offsite development team in a CMM-5 organization in southern India. This chapter is based on surveys and discussions with multiple participants. The several years since the project was completed allow greater perspective on both the strengths and weaknesses, since the participants can reflect on the entire life of the project, and compare it to subsequent experiences. Our findings emphasize the potential for agile project management in distributed software development, and the importance of people and interactions, taking many small steps to find and correct errors, and matching the structures of the project and product to support implementation of agility.

  10. AGILE integration into APC for high mix logic fab

    NASA Astrophysics Data System (ADS)

    Gatefait, M.; Lam, A.; Le Gratiet, B.; Mikolajczak, M.; Morin, V.; Chojnowski, N.; Kocsis, Z.; Smith, I.; Decaunes, J.; Ostrovsky, A.; Monget, C.

    2015-09-01

    For C040 technology and below, photolithographic depth of focus control and dispersion improvement is essential to secure product functionality. Critical 193nm immersion layers present initial focus process windows close to machine control capability. For previous technologies, the standard scanner sensor (Level sensor - LS) was used to map wafer topology and expose the wafer at the right Focus. Such optical embedded metrology, based on light reflection, suffers from reading issues that cannot be neglected anymore. Metrology errors are correlated to inspected product area for which material types and densities change, and so optical properties are not constant. Various optical phenomena occur across the product field during wafer inspection and have an effect on the quality and position of the reflected light. This can result in incorrect heights being recorded and exposures possibly being done out of focus. Focus inaccuracy associated to aggressive process windows on critical layers will directly impact product realization and therefore functionality and yield. ASML has introduced an air gauge sensor to complement the optical level sensor and lead to optimal topology metrology. The use of this new sensor is managed by the AGILE (Air Gauge Improved process LEveling) application. This measurement with no optical dependency will correct for optical inaccuracy of level sensor, and so improve best focus dispersion across the product. Due to the fact that stack complexity is more and more important through process steps flow, optical perturbation of standard Level sensor metrology is increasing and is becoming maximum for metallization layers. For these reasons AGILE feature implementation was first considered for contact and all metal layers. Another key point is that standard metrology will be sensitive to layer and reticle/product density. The gain of Agile will be enhanced for multiple product contribution mask and for complex System on Chip. Into ST context (High

  11. Recombinant protein production from stable mammalian cell lines and pools.

    PubMed

    Hacker, David L; Balasubramanian, Sowmya

    2016-06-01

    We highlight recent developments for the production of recombinant proteins from suspension-adapted mammalian cell lines. We discuss the generation of stable cell lines using transposons and lentivirus vectors (non-targeted transgene integration) and site-specific recombinases (targeted transgene integration). Each of these methods results in the generation of cell lines with protein yields that are generally superior to those achievable through classical plasmid transfection that depends on the integration of the transfected DNA by non-homologous DNA end-joining. This is the main reason why these techniques can also be used for the generation of stable cell pools, heterogenous populations of recombinant cells generated by gene delivery and genetic selection without resorting to single cell cloning. This allows the time line from gene transfer to protein production to be reduced. PMID:27322762

  12. Verifying Architectural Design Rules of the Flight Software Product Line

    NASA Technical Reports Server (NTRS)

    Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

    2009-01-01

    This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

  13. Performance evaluation of the croissant production line with reparable machines

    NASA Astrophysics Data System (ADS)

    Tsarouhas, Panagiotis H.

    2015-09-01

    In this study, the analytical probability models for an automated serial production system, bufferless that consists of n-machines in series with common transfer mechanism and control system was developed. Both time to failure and time to repair a failure are assumed to follow exponential distribution. Applying those models, the effect of system parameters on system performance in actual croissant production line was studied. The production line consists of six workstations with different numbers of reparable machines in series. Mathematical models of the croissant production line have been developed using Markov process. The strength of this study is in the classification of the whole system in states, representing failures of different machines. Failure and repair data from the actual production environment have been used to estimate reliability and maintainability for each machine, workstation, and the entire line is based on analytical models. The analysis provides a useful insight into the system's behaviour, helps to find design inherent faults and suggests optimal modifications to upgrade the system and improve its performance.

  14. Performance evaluation of the croissant production line with reparable machines

    NASA Astrophysics Data System (ADS)

    Tsarouhas, Panagiotis H.

    2014-09-01

    In this study, the analytical probability models for an automated serial production system, bufferless that consists of n-machines in series with common transfer mechanism and control system was developed. Both time to failure and time to repair a failure are assumed to follow exponential distribution. Applying those models, the effect of system parameters on system performance in actual croissant production line was studied. The production line consists of six workstations with different numbers of reparable machines in series. Mathematical models of the croissant production line have been developed using Markov process. The strength of this study is in the classification of the whole system in states, representing failures of different machines. Failure and repair data from the actual production environment have been used to estimate reliability and maintainability for each machine, workstation, and the entire line is based on analytical models. The analysis provides a useful insight into the system's behaviour, helps to find design inherent faults and suggests optimal modifications to upgrade the system and improve its performance.

  15. Current State of Agile User-Centered Design: A Survey

    NASA Astrophysics Data System (ADS)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  16. Agent-based scheduling system to achieve agility

    NASA Astrophysics Data System (ADS)

    Akbulut, Muhtar B.; Kamarthi, Sagar V.

    2000-12-01

    Today's competitive enterprises need to design, develop, and manufacture their products rapidly and inexpensively. Agile manufacturing has emerged as a new paradigm to meet these challenges. Agility requires, among many other things, scheduling and control software systems that are flexible, robust, and adaptive. In this paper a new agent-based scheduling system (ABBS) is developed to meet the challenges of an agile manufacturing system. In ABSS, unlike in the traditional approaches, information and decision making capabilities are distributed among the system entities called agents. In contrast with the most agent-based scheduling systems which commonly use a bidding approach, the ABBS employs a global performance monitoring strategy. A production-rate-based global performance metric which effectively assesses the system performance is developed to assist the agents' decision making process. To test the architecture, an agent-based discrete event simulation software is developed. The experiments performed using the simulation software yielded encouraging results in supporting the applicability of agent-based systems to address the scheduling and control needs of an agile manufacturing system.

  17. An Investigation of Agility Issues in Scrum Teams Using Agility Indicators

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna; Wang, Xiaofeng

    Agile software development methods have emerged and become increasingly popular in recent years; yet the issues encountered by software development teams that strive to achieve agility using agile methods are yet to be explored systematically. Built upon a previous study that has established a set of indicators of agility, this study investigates what issues are manifested in software development teams using agile methods. It is focussed on Scrum teams particularly. In other words, the goal of the chapter is to evaluate Scrum teams using agility indicators and therefore to further validate previously presented agility indicators within the additional cases. A multiple case study research method is employed. The findings of the study reveal that the teams using Scrum do not necessarily achieve agility in terms of team autonomy, sharing, stability and embraced uncertainty. The possible reasons include previous organizational plan-driven culture, resistance towards the Scrum roles and changing resources.

  18. How a heart network can influence a cardiovascular product line.

    PubMed

    Cotham, P; Gilmer, C

    1993-01-01

    The authors believe that a viable heart network program can give tertiary centers the competitive edge in cardiology marketing, can provide the opportunity to fine-tune cardiovascular product lines and can position hospitals to meet the challenges of the next decade in healthcare. However, success will be determined by an institution's ability to carefully balance cost and quality issues. PMID:10126710

  19. Agile robotic edge finishing

    SciTech Connect

    Powell, M.

    1996-08-01

    Edge finishing processes have seemed like ideal candidates for automation. Most edge finishing processes are unpleasant, dangerous, tedious, expensive, not repeatable and labor intensive. Estimates place the cost of manual edge finishing processes at 12% of the total cost of fabricating precision parts. For small, high precision parts, the cost of hand finishing may be as high as 305 of the total part cost. Up to 50% of this cost could be saved through automation. This cost estimate includes the direct costs of edge finishing: the machining hours required and the 30% scrap and rework rate after manual finishing. Not included in these estimates are the indirect costs resulting from cumulative trauma disorders and retraining costs caused by the high turnover rate for finishing jobs.. Despite the apparent economic advantages, edge finishing has proven difficult to automate except in low precision and/or high volume production environments. Finishing automation systems have not been deployed successfully in Department of Energy defense programs (DOE/DP) production, A few systems have been attempted but have been subsequently abandoned for traditional edge finishing approaches: scraping, grinding, and filing the edges using modified dental tools and hand held power tools. Edge finishing automation has been an elusive but potentially lucrative production enhancement. The amount of time required for reconfiguring workcells for new parts, the time required to reprogram the workcells to finish new parts, and automation equipment to respond to fixturing errors and part tolerances are the most common reasons cited for eliminating automation as an option for DOE/DP edge finishing applications. Existing automated finishing systems have proven to be economically viable only where setup and reprogramming costs are a negligible fraction of overall production costs.

  20. The AGILE gamma-ray astronomy mission

    NASA Astrophysics Data System (ADS)

    Mereghetti, S.; Tavani, M.; Argan, A.; Barbiellini, G.; Caraveo, P.; Chen, A.; Cocco, V.; Costa, E.; Di Cocco, G.; Feroci, M.; Labanti, C.; Lapshov, I.; Lipari, P.; Longo, F.; Morselli, A.; Perotti, F.; Picozza, P.; Pittori, C.; Prest, M.; Rubini, A.; Soffitta, P.; Vallazza, E.; Vercellone, S.; Zanello, D.

    2001-09-01

    We describe the AGILE satellite: a unique tool for high-energy astrophysics in the 30 MeV - 50 GeV range before GLAST. The scientific performances of AGILE are comparable to those of EGRET, despite the much smaller weight and dimensions. The AGILE mission will be optimized for the imaging capabilities above 30 MeV and for the study of transient phenomena, complemented by simultaneous monitoring in the hard X-ray band (10 - 40 keV).

  1. Cell line profiling to improve monoclonal antibody production.

    PubMed

    Kang, Sohye; Ren, Da; Xiao, Gang; Daris, Kristi; Buck, Lynette; Enyenihi, Atim A; Zubarev, Roman; Bondarenko, Pavel V; Deshpande, Rohini

    2014-04-01

    Mammalian cell culture performance is influenced by both intrinsic (genetic) and extrinsic (media and process) factors. In this study, intrinsic capacity of various monoclonal antibody-producing Chinese Hamster Ovary (CHO) cell lines was compared by exposing them to the same culture condition. Microarray-based transcriptomics and LC-MS/MS shotgun proteomics technologies were utilized to obtain expression landscape of different cell lines. Specific transcripts and proteins correlating with productivity, growth rate and cell size have been identified. The proteomics analysis results showed a strong correlation between the intracellular protein expression levels of the recombinant DHFR and productivity. In contrast, neither the light chain nor the heavy chain of the recombinant monoclonal antibody showed correlation to productivity. Other top ranked proteins which demonstrated positive correlation to productivity included the adaptor protein complex subunits AP3D1and AP2B2, DNA repair protein DDB1 and the ER translocation complex component, SRPR. The subunits of molecular chaperone T-complex protein 1 and the regulator of mitochondrial one-carbon metabolism MTHFD2 showed negative correlation to productivity. The transcriptomics analysis has identified the regulators of calcium signaling, Tmem20 and Rcan1, as the top ranked genes displaying positive and negative correlation to productivity, respectively. For the second part of the study, the principal component analysis (PCA) was generated to view the underlying global structure of the expression data. A clear division and expression polarity was observed between the two distinct clusters of cell lines, independent of link to productivity or any other traits examined. The primary component of the PCA generated from either transcriptomics or proteomics data displayed a strong correlation to cell size and doubling time, while none of the main principal components showed correlation to productivity. Our findings suggest

  2. Assessment of proposed fighter agility metrics

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.; Downing, David R.

    1990-01-01

    This paper presents the results of an analysis of proposed metrics to assess fighter aircraft agility. A novel framework for classifying these metrics is developed and applied. A set of transient metrics intended to quantify the axial and pitch agility of fighter aircraft is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction method are proposed, and sensitivities to pilot introduced errors during flight testing is investigated. Results indicate that the power onset and power loss parameters are promising candidates for quantifying axial agility, while maximum pitch up and pitch down rates are for quantifying pitch agility.

  3. Verification of Software Product Lines with Delta-Oriented Slicing

    NASA Astrophysics Data System (ADS)

    Bruns, Daniel; Klebanov, Vladimir; Schaefer, Ina

    Software product line (SPL) engineering is a well-known approach to develop industry-size adaptable software systems. SPL are often used in domains where high-quality software is desirable; the overwhelming product diversity, however, remains a challenge for assuring correctness. In this paper, we present delta-oriented slicing, an approach to reduce the deductive verification effort across an SPL where individual products are Java programs and their relations are described by deltas. On the specification side, we extend the delta language to deal with formal specifications. On the verification side, we combine proof slicing and similarity-guided proof reuse to ease the verification process.

  4. Aspect-Oriented Model-Driven Software Product Line Engineering

    NASA Astrophysics Data System (ADS)

    Groher, Iris; Voelter, Markus

    Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

  5. Targeted genetic modification of cell lines for recombinant protein production

    PubMed Central

    Piskareva, Olga; Muniyappa, Mohan

    2007-01-01

    Considerable increases in productivity have been achieved in biopharmaceutical production processes over the last two decades. Much of this has been a result of improvements in media formulation and process development. Though advances have been made in cell line development, there remains considerable opportunity for improvement in this area. The wealth of transcriptional and proteomic data being generated currently hold the promise of specific molecular interventions to improve the performance of production cell lines in the bioreactor. Achieving this—particularly for multi-gene modification—will require specific, targeted and controlled genetic manipulation of these cells. This review considers some of the current and potential future techniques that might be employed to realise this goal. PMID:19003191

  6. Agile manufacturing and constraints management: a strategic perspective

    NASA Astrophysics Data System (ADS)

    Stratton, Roy; Yusuf, Yahaya Y.

    2000-10-01

    The definition of the agile paradigm has proved elusive and is often viewed as a panacea, in contention with more traditional approaches to operations strategy development and Larkin its own methodology and tools. The Theory of Constraints (TOC) is also poorly understood, as it is commonly solely associated with production planning and control systems and bottleneck management. This paper will demonstrate the synergy between these two approaches together with the Theory of Inventive Problem Solving (TRIZ), and establish how the systematic elimination of trade-offs can support the agile paradigm. Whereas agility is often seen as a trade-off free destination, both TOC and TRIZ may be considered to be route finders, as they comprise methodologies that focus on the identification and elimination of the trade-offs that constrain the purposeful improvement of a system, be it organizational or mechanical. This paper will also show how the TOC thinking process may be combined with the TRIZ knowledge based approach and used in breaking contradictions within agile logistics.

  7. Matrix Metalloproteinase-9 Production by Immortalized Human Chondrocyte Lines

    PubMed Central

    Malemud, Charles J.; Meszaros, Evan C.; Wylie, Meredith A.; Dahoud, Wissam; Skomorovska-Prokvolit, Yelenna; Mesiano, Sam

    2016-01-01

    We reported at the Keynote Forum of Immunology Summit-2015 that recombinant human (rh) TNF-α or rhIL-6 stimulated production of matrix metalloproteinase-9 (MMP-9) in the T/C28a2 and C-28/I2 human immortalized chondrocyte cell lines. Furthermore, we reported that tocilizumab (TCZ), a fully humanized monoclonal antibody which neutralizes IL-6-mediated signaling, inhibited the rhIL-6-mediated increase in the production of MMP-9. IL-6 is also a known activator of the JAK/STAT signaling pathway. In that regard, we evaluated the effect of rhIL-6 on total and phosphorylated Signal Transducer and Activator of Transcription by these chondrocyte lines which showed that whereas STAT3 was constitutively phosphorylated in T/C28a2 chondrocytes, rhIL-6 activated STAT3 in C-28/I2 chondrocytes. The finding that rhIL-6 increased the production of MMP-9 by human immortalized chondrocyte cell lines may have important implications with respect to the destruction of articular cartilage in rheumatoid arthritis and osteoarthritis. Thus, the markedly elevated level of IL-6 in rheumatoid arthritis and osteoarthritis sera and synovial fluid would be expected to generate significant MMP-9 to cause the degradation of articular cartilage extracellular matrix proteins. The finding that TCZ suppressed rhIL-6-mediated MMP-9 production suggests that TCZ, currently employed in the medical therapy of rheumatoid arthritis, could be considered as a drug for osteoarthritis.

  8. Multiply-agile encryption in high speed communication networks

    SciTech Connect

    Pierson, L.G.; Witzke, E.L.

    1997-05-01

    Different applications have different security requirements for data privacy, data integrity, and authentication. Encryption is one technique that addresses these requirements. Encryption hardware, designed for use in high-speed communications networks, can satisfy a wide variety of security requirements if that hardware is key-agile, robustness-agile and algorithm-agile. Hence, multiply-agile encryption provides enhanced solutions to the secrecy, interoperability and quality of service issues in high-speed networks. This paper defines these three types of agile encryption. Next, implementation issues are discussed. While single-algorithm, key-agile encryptors exist, robustness-agile and algorithm-agile encryptors are still research topics.

  9. An Agile Course-Delivery Approach

    ERIC Educational Resources Information Center

    Capellan, Mirkeya

    2009-01-01

    In the world of software development, agile methodologies have gained popularity thanks to their lightweight methodologies and flexible approach. Many advocates believe that agile methodologies can provide significant benefits if applied in the educational environment as a teaching method. The need for an approach that engages and motivates…

  10. The Introduction of Agility into Albania.

    ERIC Educational Resources Information Center

    Smith-Stevens, Eileen J.; Shkurti, Drita

    1998-01-01

    Describes a plan to introduce and achieve a national awareness of agility (and easy entry into the world market) for Albania through the relatively stable higher-education order. Agility's four strategic principles are enriching the customer, cooperating to enhance competitiveness, organizing to master change and uncertainty, and leveraging the…

  11. Teaching Agile Software Development: A Case Study

    ERIC Educational Resources Information Center

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  12. Fighter agility metrics, research, and test

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.; Valasek, John; Eggold, David P.

    1990-01-01

    Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A completed set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation provided by the NASA Dryden Flight Research Center. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available. Simulation documentation and user instructions are provided in an appendix.

  13. Integrating a distributed, agile, virtual enterprise in the TEAM program

    NASA Astrophysics Data System (ADS)

    Cobb, C. K.; Gray, W. Harvey; Hewgley, Robert E.; Klages, Edward J.; Neal, Richard E.

    1997-01-01

    The technologies enabling agile manufacturing (TEAM) program enhances industrial capability by advancing and deploying manufacturing technologies that promote agility. TEAM has developed a product realization process that features the integration of product design and manufacturing groups. TEAM uses the tools it collects, develops, and integrates in support of the product realization process to demonstrate and deploy agile manufacturing capabilities for three high- priority processes identified by industry: material removal, forming, and electromechanical assembly. In order to provide a proof-of-principle, the material removal process has been addressed first and has been successfully demonstrate din an 'interconnected' mode. An internet-accessible intersite file manager (IFM) application has been deployed to allow geographically distributed TEAM participants to share and distribute information as the product realization process is executed. An automated inspection planning application has been demonstrated, importing a solid model form the IFM, generating an inspection plan and a part program to be used in the inspection process, and then distributing the part program to the inspection site via the IFM. TEAM seeks to demonstrate the material removal process in an integrated mode in June 1997 complete with an object-oriented framework and infrastructure. The current status and future plans for this project are presented here.

  14. Planning and scheduling for agile manufacturers: The Pantex Process Model

    SciTech Connect

    Kjeldgaard, E.A.; Jones, D.A.; List, G.F.; Tumquist, M.A.

    1998-02-01

    Effective use of resources that are shared among multiple products or processes is critical for agile manufacturing. This paper describes the development and implementation of a computerized model to support production planning in a complex manufacturing system at the Pantex Plant, a US Department of Energy facility. The model integrates two different production processes (nuclear weapon disposal and stockpile evaluation) that use common facilities and personnel at the plant. The two production processes are characteristic of flow-shop and job shop operations. The model reflects the interactions of scheduling constraints, material flow constraints, and the availability of required technicians and facilities. Operational results show significant productivity increases from use of the model.

  15. 40 CFR 1054.310 - How must I select engines for production-line testing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... production-line testing? 1054.310 Section 1054.310 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... EQUIPMENT Production-line Testing § 1054.310 How must I select engines for production-line testing? (a) Test... each test period, randomly select and test an engine from the end of the assembly line for each...

  16. Human cell lines: A promising alternative for recombinant FIX production.

    PubMed

    de Sousa Bomfim, Aline; Cristina Corrêa de Freitas, Marcela; Picanço-Castro, Virgínia; de Abreu Soares Neto, Mário; Swiech, Kamilla; Tadeu Covas, Dimas; Maria de Sousa Russo, Elisa

    2016-05-01

    Factor IX (FIX) is a vitamin K-dependent protein, and it has become a valuable pharmaceutical in the Hemophilia B treatment. We evaluated the potential of recombinant human FIX (rhFIX) expression in 293T and SK-Hep-1 human cell lines. SK-Hep-1-FIX cells produced higher levels of biologically active protein. The growth profile of 293T-FIX cells was not influenced by lentiviral integration number into the cellular genome. SK-Hep-1-FIX cells showed a significantly lower growth rate than SK-Hep-1 cells. γ-carboxylation process is significant to FIX biological activity, thus we performed a expression analysis of genes involved in this process. The 293T gene expression suggests that this cell line could efficiently carboxylate FIX, however only 28% of the total secreted protein is active. SK-Hep-1 cells did not express high amounts of VKORC1 and carboxylase, but this cell line secreted large amounts of active protein. Enrichment of culture medium with Ca(+2) and Mg(+2) ions did not affect positively rhFIX expression in SK-Hep-1 cells. In 293T cells, the addition of 0.5 mM Ca(+2) and 1 mM Mg(+2) resulted in higher rhFIX concentration. SK-Hep-1 cell line proved to be very effective in rhFIX production, and it can be used as a novel biotechnological platform for the production of recombinant proteins. PMID:26802680

  17. Opening up the Agile Innovation Process

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

    The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

  18. Kedalion: NASA's Adaptable and Agile Hardware/Software Integration and Test Lab

    NASA Technical Reports Server (NTRS)

    Mangieri, Mark L.; Vice, Jason

    2011-01-01

    NASA fs Kedalion engineering analysis lab at Johnson Space Center is on the forefront of validating and using many contemporary avionics hardware/software development and integration techniques, which represent new paradigms to heritage NASA culture. Kedalion has validated many of the Orion hardware/software engineering techniques borrowed from the adjacent commercial aircraft avionics solution space, with the intention to build upon such techniques to better align with today fs aerospace market. Using agile techniques, commercial products, early rapid prototyping, in-house expertise and tools, and customer collaboration, Kedalion has demonstrated that cost effective contemporary paradigms hold the promise to serve future NASA endeavors within a diverse range of system domains. Kedalion provides a readily adaptable solution for medium/large scale integration projects. The Kedalion lab is currently serving as an in-line resource for the project and the Multipurpose Crew Vehicle (MPCV) program.

  19. Product-line performance reporting: a key to cost management.

    PubMed

    Nackel, J G; Fenaroli, P J; Kis, G M

    1987-11-01

    For many hospitals, performance reporting is the most important and valuable function of a cost management system. Performance reporting provides hospitals--or any organization, for that matter--with an enhanced ability to reduce and control costs and monitor profitability. By periodically comparing strategic and operational plans with actual results, managers are provided with measurements of their performance for the aspects of the organization they control. The following is an excerpt from the book, Cost Management for Hospitals. This section deals with product-line performance reporting and the variances that measure the effects different factors have on performance. PMID:10284490

  20. Social Protocols for Agile Virtual Teams

    NASA Astrophysics Data System (ADS)

    Picard, Willy

    Despite many works on collaborative networked organizations (CNOs), CSCW, groupware, workflow systems and social networks, computer support for virtual teams is still insufficient, especially support for agility, i.e. the capability of virtual team members to rapidly and cost efficiently adapt the way they interact to changes. In this paper, requirements for computer support for agile virtual teams are presented. Next, an extension of the concept of social protocol is proposed as a novel model supporting agile interactions within virtual teams. The extended concept of social protocol consists of an extended social network and a workflow model.

  1. Heparanase augments inflammatory chemokine production from colorectal carcinoma cell lines.

    PubMed

    Tsunekawa, Naoki; Higashi, Nobuaki; Kogane, Yusuke; Waki, Michihiko; Shida, Hiroaki; Nishimura, Yoshio; Adachi, Hayamitsu; Nakajima, Motowo; Irimura, Tatsuro

    2016-01-22

    To explore possible roles of heparanase in cancer-host crosstalk, we examined whether heparanase influences expression of inflammatory chemokines in colorectal cancer cells. Murine colorectal carcinoma cells incubated with heparanase upregulated MCP-1, KC, and RANTES genes and released MCP-1 and KC proteins. Heparanase-dependent production of IL-8 was detected in two human colorectal carcinoma cell lines. Addition of a heparanase inhibitor Heparastatin (SF4) did not influence MCP-1 production, while both latent and mature forms of heparanase augmented MCP-1 release, suggesting that heparanase catalytic activity was dispensable for MCP-1 production. In contrast, addition of heparin to the medium suppressed MCP-1 release in a dose-dependent manner. Similarly, targeted suppression of Ext1 by RNAi significantly suppressed cell surface expression of heparan sulfate and MCP-1 production in colon 26 cells. Taken together, it is concluded that colon 26 cells transduce the heparanase-mediated signal through heparan sulfate binding. We propose a novel function for heparanase independent of its endoglycosidase activity, namely as a stimulant for chemokine production. PMID:26713365

  2. Agile Data Curation at a State Geological Survey

    NASA Astrophysics Data System (ADS)

    Hills, D. J.

    2015-12-01

    State agencies, including geological surveys, are often the gatekeepers for myriad data products essential for scientific research and economic development. For example, the Geological Survey of Alabama (GSA) is mandated to explore for, characterize, and report Alabama's mineral, energy, water, and biological resources in support of economic development, conservation, management, and public policy for the betterment of Alabama's citizens, communities, and businesses. As part of that mandate, the GSA has increasingly been called upon to make our data more accessible to stakeholders. Even as demand for greater data accessibility grows, budgets for such efforts are often small, meaning that agencies must do more for less. Agile software development has yielded efficient, effective products, most often at lower cost and in shorter time. Taking guidance from the agile software development model, the GSA is working towards more agile data management and curation. To date, the GSA's work has been focused primarily on data rescue. By using workflows that maximize clear communication while encouraging simplicity (e.g., maximizing the amount of work not done or that can be automated), the GSA is bringing decades of dark data into the light. Regular checks by the data rescuer with the data provider (or their proxy) provides quality control without adding an overt burden on either party. Moving forward, these workflows will also allow for more efficient and effective data management.

  3. Decreasing costs of ground data processing system development using a software product line

    NASA Technical Reports Server (NTRS)

    Chaffin, Brian

    2005-01-01

    In this paper, I describe software product lines and why a Ground Data Processing System should use one. I also describe how to develop a software product line, using examples from an imaginary Ground Data Processing System.

  4. Towards a Better Understanding of CMMI and Agile Integration - Multiple Case Study of Four Companies

    NASA Astrophysics Data System (ADS)

    Pikkarainen, Minna

    The amount of software is increasing in the different domains in Europe. This provides the industries in smaller countries good opportunities to work in the international markets. Success in the global markets however demands the rapid production of high quality, error free software. Both CMMI and agile methods seem to provide a ready solution for quality and lead time improvements. There is not, however, much empirical evidence available either about 1) how the integration of these two aspects can be done in practice or 2) what it actually demands from assessors and software process improvement groups. The goal of this paper is to increase the understanding of CMMI and agile integration, in particular, focusing on the research question: how to use ‘lightweight’ style of CMMI assessments in agile contexts. This is done via four case studies in which assessments were conducted using the goals of CMMI integrated project management and collaboration and coordination with relevant stakeholder process areas and practices from XP and Scrum. The study shows that the use of agile practices may support the fulfilment of the goals of CMMI process areas but there are still many challenges for the agile teams to be solved within the continuous improvement programs. It also identifies practical advices to the assessors and improvement groups to take into consideration when conducting assessment in the context of agile software development.

  5. Agility Following the Application of Cold Therapy

    PubMed Central

    Evans, Todd A.; Ingersoll, Christopher; Knight, Kenneth L.; Worrell, Teddy

    1995-01-01

    Cold application is commonly used before strenuous exercise due to its hypalgesic effects. Some have questioned this procedure because of reports that cold may reduce isokinetic torque. However, there have been no investigations of actual physical performance following cold application. The purpose of this study was to determine if a 20-minute ice immersion treatment to the foot and ankle affected the performance of three agility tests: the carioca maneuver, the cocontraction test, and the shuttle run. Twenty-four male athletic subjects were tested during two different treatment sessions following an orientation session. Subjects were tested following a 20-minute 1°C ice immersion treatment to the dominant foot and ankle and 20 minutes of rest. Following each treatment, subjects performed three trials of each agility test, with 30 seconds rest between each trial, and 1 minute between each different agility test. The order in which each subject performed the agility tests was determined by a balanced Latin square. A MANOVA with repeated measures was used to determine if there was an overall significant difference in the agility times recorded between the cold and control treatments and if the order of the treatment sessions affected the scores. Although the mean agility time scores were slightly slower following the cold treatment, cooling the foot and ankle caused no difference in agility times. Also, there was no difference resulting from the treatment orders. We felt that the slightly slower scores may have been a result of tissue stiffness and/or subject's apprehension immediately following the cold treatment. Cold application to the foot and ankle can be used before strenuous exercise without altering agility. Imagesp232-a PMID:16558341

  6. 16 CFR 303.22 - Products containing linings, interlinings, fillings, and paddings.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE TEXTILE FIBER PRODUCTS IDENTIFICATION... required information as to textile fiber products, the fiber content of any linings, interlinings,...

  7. Clustering-based urbanisation to improve enterprise information systems agility

    NASA Astrophysics Data System (ADS)

    Imache, Rabah; Izza, Said; Ahmed-Nacer, Mohamed

    2015-11-01

    Enterprises are daily facing pressures to demonstrate their ability to adapt quickly to the unpredictable changes of their dynamic in terms of technology, social, legislative, competitiveness and globalisation. Thus, to ensure its place in this hard context, enterprise must always be agile and must ensure its sustainability by a continuous improvement of its information system (IS). Therefore, the agility of enterprise information systems (EISs) can be considered today as a primary objective of any enterprise. One way of achieving this objective is by the urbanisation of the EIS in the context of continuous improvement to make it a real asset servicing enterprise strategy. This paper investigates the benefits of EISs urbanisation based on clustering techniques as a driver for agility production and/or improvement to help managers and IT management departments to improve continuously the performance of the enterprise and make appropriate decisions in the scope of the enterprise objectives and strategy. This approach is applied to the urbanisation of a tour operator EIS.

  8. 40 CFR 1042.305 - Preparing and testing production-line engines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of hours you operated your emission-data engine for certifying the engine family (see 40 CFR part... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Preparing and testing production-line... AND VESSELS Testing Production-line Engines § 1042.305 Preparing and testing production-line...

  9. Product lines in a complex marketplace: matching organizational strategy to buyer behavior.

    PubMed

    Zelman, W N; McLaughlin, C P

    1990-01-01

    Product-line strategy should be developed in relation to markets. This article focuses on designing product-line strategy in relation to four purchaser types: (1) traditional purchasers, (2) motivated purchasers, (3) HMO-type purchasers, and (4) PPO-type purchasers. In many cases, product-line strategy may have to adopt various combinations of the above. PMID:2351546

  10. Production-line assembly of 150+ VIRUS spectrographs

    NASA Astrophysics Data System (ADS)

    Marshall, J. L.; Vattiat, Brian; DePoy, D. L.; Hill, Gary J.; Collins, Amanda D.; Lee, Hanshin; Allen, Richard D.; Kelz, Andreas; Bauer, Svend M.; Popow, Emil

    2010-07-01

    The Visual Integral-Field Replicable Unit Spectrograph (VIRUS) instrument is being built to support observations for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) project. The instrument consists of 150+ identical fiber-fed integral field optical spectrographs. This instrument provides a unique challenge in astronomical instrumentation: each of the 150+ instruments must be identical and each component must be interchangeable amongst every other spectrograph in order to ease assembly and maintenance of the instrument. In this paper we describe plans for the production-line assembly of the spectrographs. In particular, we discuss the assembly procedures and design choices that will ensure uniformity of the spectrographs and support the project schedule.

  11. AGILE observation of a gamma-ray flare from the blazar 3C 279

    NASA Astrophysics Data System (ADS)

    Giuliani, A.; D'Ammando, F.; Vercellone, S.; Vittorini, V.; Chen, A. W.; Donnarumma, I.; Pacciani, L.; Pucella, G.; Trois, A.; Bulgarelli, A.; Longo, F.; Tavani, M.; Tosti, G.; Impiombato, D.; Argan, A.; Barbiellini, G.; Boffelli, F.; Caraveo, P. A.; Cattaneo, P. W.; Cocco, V.; Costa, E.; Del Monte, E.; de Paris, G.; Di Cocco, G.; Evangelista, Y.; Feroci, M.; Fiorini, M.; Fornari, F.; Froysland, T.; Fuschino, F.; Galli, M.; Gianotti, F.; Labanti, C.; Lapshov, Y.; Lazzarotto, F.; Lipari, P.; Marisaldi, M.; Mereghetti, S.; Morselli, A.; Pellizzoni, A.; Perotti, F.; Picozza, P.; Prest, M.; Rapisarda, M.; Rappoldi, A.; Soffitta, P.; Trifoglio, M.; Vallazza, E.; Zambra, A.; Zanello, D.; Cutini, S.; Gasparrini, D.; Pittori, C.; Preger, B.; Santolamazza, P.; Verrecchia, F.; Giommi, P.; Colafrancesco, S.; Salotti, L.

    2009-02-01

    Context: We report the detection by the AGILE satellite of an intense gamma-ray flare from the gamma-ray source 3EG J1255-0549, associated with the Flat Spectrum Radio Quasar 3C 279, during the AGILE pointings towards the Virgo Region on 2007 July 9-13. Aims: The simultaneous optical, X-ray and gamma-ray covering allows us to study the spectral energy distribution (SED) and the theoretical models relative to the mid-July flaring episode. Methods: AGILE observed the source during its Science Performance Verification Phase with its two co-aligned imagers: the Gamma-Ray Imaging Detector (GRID) and the hard X-ray imager (Super-AGILE) sensitive in the 30 MeV-50 GeV and 18-60 keV respectively. During the AGILE observation the source was monitored simultaneously in the optical band by the REM telescope and in the X-ray band by the Swift satellite through 4 target of opportunity observations. Results: During 2007 July 9-13, AGILE-GRID detected gamma-ray emission from 3C 279, with the source at ~2° from the center of the field of view, with an average flux of (210 ± 38) × 10-8 ph cm-2 s-1 for energy above 100 MeV. No emission was detected by Super-AGILE, with a 3-σ upper limit of 10 mCrab. During the observation, which lasted about 4 days, no significative gamma-ray flux variation was observed. Conclusions: The Spectral Energy Distribution is modelled with a homogeneous one-zone Synchrotron Self Compton emission plus the contributions by external Compton scattering of the direct disk radiation and, to a lesser extent, by external Compton scattering of photons from the Broad Line Region.

  12. Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

    NASA Technical Reports Server (NTRS)

    Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

    2011-01-01

    Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

  13. Progress in DRS production line for uncooled focal plane arrays

    NASA Astrophysics Data System (ADS)

    Han, Chien J.; Howard, Christopher G.; Howard, Philip E.; Ionescu, Adrian C.; Li, Chuan C.; Monson, John C.; Naranjo, Robert L.; Scholten, Myron J.; Sweeney, R. Michael; Strong, Roger L.; Sullivan, William; Teherani, Towfik H.

    2004-08-01

    To improve its capacity to meet customer needs, DRS Infrared Technologies began technology transfer of the VOx uncooled FPA process from its Anaheim facility to its Dallas facility in the Fall of 2002. The new facility delivered its first U3000 arrays (320x240, 51μm pitch) three months after the VOx deposition system was installed, and produced over 300 units of U3000 per month just twelve months after beginning the transfer. Process enhancements and tool upgrades have enabled excellent control of the microbolometer process. Today, this line selectively fabricates arrays with NETD varying from 30mK to 80mK in 15mK bins with less than 30 ms time constant. The same arrays also have low defect density of less than 2% dead pixels and no more than one row and one column out. The arrays are packaged in imager or radiometer (F/1.4) packages. DRS also transferred small and large format arrays with 25μm pitch under the PEO-Soldier Sensor Producibility to the Dallas facility. Production of the 25μm pitch devices is currently more that 100 units per month and is ramping up to meet customer demand. This paper reports on production progress on the U3000s and the status of U3500 and U6000 25μm pitch array.

  14. Managing the Evolution of an Enterprise Architecture using a MAS-Product-Line Approach

    NASA Technical Reports Server (NTRS)

    Pena, Joaquin; Hinchey, Michael G.; Resinas, manuel; Sterritt, Roy; Rash, James L.

    2006-01-01

    We view an evolutionary system ns being n software product line. The core architecture is the unchanging part of the system, and each version of the system may be viewed as a product from the product line. Each "product" may be described as the core architecture with sonre agent-based additions. The result is a multiagent system software product line. We describe an approach to such n Software Product Line-based approach using the MaCMAS Agent-Oriented nzethoclology. The approach scales to enterprise nrchitectures as a multiagent system is an approprinre means of representing a changing enterprise nrchitectclre nnd the inferaction between components in it.

  15. Fighter agility metrics. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Liefer, Randall K.

    1990-01-01

    Fighter flying qualities and combat capabilities are currently measured and compared in terms relating to vehicle energy, angular rates and sustained acceleration. Criteria based on these measurable quantities have evolved over the past several decades and are routinely used to design aircraft structures, aerodynamics, propulsion and control systems. While these criteria, or metrics, have the advantage of being well understood, easily verified and repeatable during test, they tend to measure the steady state capability of the aircraft and not its ability to transition quickly from one state to another. Proposed new metrics to assess fighter aircraft agility are collected and analyzed. A framework for classification of these new agility metrics is developed and applied. A complete set of transient agility metrics is evaluated with a high fidelity, nonlinear F-18 simulation. Test techniques and data reduction methods are proposed. A method of providing cuing information to the pilot during flight test is discussed. The sensitivity of longitudinal and lateral agility metrics to deviations from the pilot cues is studied in detail. The metrics are shown to be largely insensitive to reasonable deviations from the nominal test pilot commands. Instrumentation required to quantify agility via flight test is also considered. With one exception, each of the proposed new metrics may be measured with instrumentation currently available.

  16. Gamma-ray Astrophysics with AGILE

    SciTech Connect

    Longo, Francesco |; Tavani, M.; Barbiellini, G.; Argan, A.; Basset, M.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P.; Chen, A.; Costa, E.; Del Monte, E.; Di Cocco, G.; Di Persio, G.; Donnarumma, I.; Feroci, M.; Fiorini, M.; Foggetta, L.; Froysland, T.; Frutti, M.

    2007-07-12

    AGILE will explore the gamma-ray Universe with a very innovative instrument combining for the first time a gamma-ray imager and a hard X-ray imager. AGILE will be operational in spring 2007 and it will provide crucial data for the study of Active Galactic Nuclei, Gamma-Ray Bursts, unidentified gamma-ray sources. Galactic compact objects, supernova remnants, TeV sources, and fundamental physics by microsecond timing. The AGILE instrument is designed to simultaneously detect and image photons in the 30 MeV - 50 GeV and 15 - 45 keV energy bands with excellent imaging and timing capabilities, and a large field of view covering {approx} 1/5 of the entire sky at energies above 30 MeV. A CsI calorimeter is capable of GRB triggering in the energy band 0.3-50 MeV AGILE is now (March 2007) undergoing launcher integration and testing. The PLSV launch is planned in spring 2007. AGILE is then foreseen to be fully operational during the summer of 2007.

  17. Agile enterprise development framework utilizing services principles for building pervasive security

    NASA Astrophysics Data System (ADS)

    Farroha, Deborah; Farroha, Bassam

    2011-06-01

    We are in an environment of continuously changing mission requirements and therefore our Information Systems must adapt to accomplish new tasks, quicker, in a more proficient manner. Agility is the only way we will be able to keep up with this change. But there are subtleties that must be considered as we adopt various agile methods: secure, protect, control and authenticate are all elements needed to posture our Information Technology systems to counteract the real and perceived threats in today's environment. Many systems have been tasked to ingest process and analyze different data sets than they were originally designed for and they have to interact with multiple new systems that were unaccounted for at design time. Leveraging the tenets of security, we have devised a new framework that takes agility into a new realm where the product will built to work in a service-based environment but is developed using agile processes. Even though these two criteria promise to hone the development effort, they actually contradict each other in philosophy where Services require stable interfaces, while Agile focuses on being flexible and tolerate changes up to much later stages of development. This framework is focused on enabling a successful product development that capitalizes on both philosophies.

  18. Neural networks are paying off on the production line

    SciTech Connect

    Irving, B.

    1997-10-01

    One very small company is working overtime on a technology called neural networks and is bringing this technology onto the production lines of some of the largest manufacturers in the world. The innovator here is Native American Technologies Co., Golden, Colo. Jerry Jones, the company`s chief scientist, explained the reason for this great interest in neural networks. A former member of the faculty at Colorado School of Mines, Jones said the large manufacturers want robust operating conditions. They want to be able to understand their processes well enough so that they don`t have to have fixtures on their shop floors. Fixtures are expensive to buy and to maintain and they have been known to die on the shop floor. Industry wants software capable of searching for those most robust operating conditions. N.A. Technologies is working closely with the Colorado School of Mines and with AMET, Inc., Rexford, Idaho, on projects in arc welding, friction stir welding, resistance welding, laser beam welding and electron beam welding. All of these projects are using exactly the same architecture and the same software, so the cost of development is spread out over a wide number of projects and a large number of potential applications. The end result is that the cost for any one given process is significantly less than it would be by any other approach.

  19. An investigation of fighter aircraft agility

    NASA Technical Reports Server (NTRS)

    Valasek, John; Downing, David R.

    1993-01-01

    This report attempts to unify in a single document the results of a series of studies on fighter aircraft agility funded by the NASA Ames Research Center, Dryden Flight Research Facility and conducted at the University of Kansas Flight Research Laboratory during the period January 1989 through December 1993. New metrics proposed by pilots and the research community to assess fighter aircraft agility are collected and analyzed. The report develops a framework for understanding the context into which the various proposed fighter agility metrics fit in terms of application and testing. Since new metrics continue to be proposed, this report does not claim to contain every proposed fighter agility metric. Flight test procedures, test constraints, and related criteria are developed. Instrumentation required to quantify agility via flight test is considered, as is the sensitivity of the candidate metrics to deviations from nominal pilot command inputs, which is studied in detail. Instead of supplying specific, detailed conclusions about the relevance or utility of one candidate metric versus another, the authors have attempted to provide sufficient data and analyses for readers to formulate their own conclusions. Readers are therefore ultimately responsible for judging exactly which metrics are 'best' for their particular needs. Additionally, it is not the intent of the authors to suggest combat tactics or other actual operational uses of the results and data in this report. This has been left up to the user community. Twenty of the candidate agility metrics were selected for evaluation with high fidelity, nonlinear, non real-time flight simulation computer programs of the F-5A Freedom Fighter, F-16A Fighting Falcon, F-18A Hornet, and X-29A. The information and data presented on the 20 candidate metrics which were evaluated will assist interested readers in conducting their own extensive investigations. The report provides a definition and analysis of each metric; details

  20. Gamma-ray astrophysics with AGILE

    NASA Astrophysics Data System (ADS)

    Tavani, M.

    2003-09-01

    Gamma-ray astrophysics above 30 MeV will soon be revitalized by a new generation of high-energy detectors in space. We discuss here the AGILE Mission that will be dedicated to gamma-ray astrophysics above 30 MeV during the period 2005-2006. The main characteristics of AGILE are: (1) excellent imaging and monitoring capabilities both in the γ-ray (30 MeV - 30 GeV) and hard X-ray (10-40 keV) energy ranges (reaching an arcminute source positioning), (2) very good timing (improving by three orders of magnitude the instrumental deadtime for γ-ray detection compared to previous instruments), and (3) excellent imaging and triggering capability for Gamma-Ray Bursts. The AGILE scientific program will emphasize a quick response to gamma-ray transients and multiwavelength studies of gamma-ray sources.

  1. SuperAGILE and Gamma Ray Bursts

    SciTech Connect

    Pacciani, Luigi; Costa, Enrico; Del Monte, Ettore; Donnarumma, Immacolata; Evangelista, Yuri; Feroci, Marco; Frutti, Massimo; Lazzarotto, Francesco; Lapshov, Igor; Rubini, Alda; Soffitta, Paolo; Tavani, Marco; Barbiellini, Guido; Mastropietro, Marcello; Morelli, Ennio; Rapisarda, Massimo

    2006-05-19

    The solid-state hard X-ray imager of AGILE gamma-ray mission -- SuperAGILE -- has a six arcmin on-axis angular resolution in the 15-45 keV range, a field of view in excess of 1 steradian. The instrument is very light: 5 kg only. It is equipped with an on-board self triggering logic, image deconvolution, and it is able to transmit the coordinates of a GRB to the ground in real-time through the ORBCOMM constellation of satellites. Photon by photon Scientific Data are sent to the Malindi ground station at every contact. In this paper we review the performance of the SuperAGILE experiment (scheduled for a launch in the middle of 2006), after its first onground calibrations, and show the perspectives for Gamma Ray Bursts.

  2. A first-generation software product line for data acquisition systems in astronomy

    NASA Astrophysics Data System (ADS)

    López-Ruiz, J. C.; Heradio, Rubén; Cerrada Somolinos, José Antonio; Coz Fernandez, José Ramón; López Ramos, Pablo

    2008-07-01

    This article presents a case study on developing a software product line for data acquisition systems in astronomy based on the Exemplar Driven Development methodology and the Exemplar Flexibilization Language tool. The main strategies to build the software product line are based on the domain commonality and variability, the incremental scope and the use of existing artifacts. It consists on a lean methodology with little impact on the organization, suitable for small projects, which reduces product line start-up time. Software Product Lines focuses on creating a family of products instead of individual products. This approach has spectacular benefits on reducing the time to market, maintaining the know-how, reducing the development costs and increasing the quality of new products. The maintenance of the products is also enhanced since all the data acquisition systems share the same product line architecture.

  3. 76 FR 62343 - Certain Lined Paper Products From India: Notice of Preliminary Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... FR 66349 (October 28, 2010. (Initiation Notice).\\2\\ \\1\\ Abhinav Paper Products Pvt. Ltd.; American... Critical Circumstances Determination: Certain Lined Paper Products from India, 71 FR 45034, 45035 (August 8... Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September...

  4. Integrated configurable equipment selection and line balancing for mass production with serial-parallel machining systems

    NASA Astrophysics Data System (ADS)

    Battaïa, Olga; Dolgui, Alexandre; Guschinsky, Nikolai; Levin, Genrikh

    2014-10-01

    Solving equipment selection and line balancing problems together allows better line configurations to be reached and avoids local optimal solutions. This article considers jointly these two decision problems for mass production lines with serial-parallel workplaces. This study was motivated by the design of production lines based on machines with rotary or mobile tables. Nevertheless, the results are more general and can be applied to assembly and production lines with similar structures. The designers' objectives and the constraints are studied in order to suggest a relevant mathematical model and an efficient optimization approach to solve it. A real case study is used to validate the model and the developed approach.

  5. Gamma ray line production from cosmic ray spallation reactions

    NASA Technical Reports Server (NTRS)

    Silberberg, R.; Tsao, C. H.; Letaw, J. R.

    1985-01-01

    The gamma ray line intensities due to cosmic ray spallation reactions in clouds, the galactic disk and accreting binary pulsars are calculated. With the most favorable plausible assumptions, only a few lines may be detectable to the level of 0.0000001 per sq. cm per sec. The intensities are compared with those generated in nuclear excitation reactions.

  6. Developing a model for agile supply: an empirical study from Iranian pharmaceutical supply chain.

    PubMed

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  7. Developing a Model for Agile Supply: an Empirical Study from Iranian Pharmaceutical Supply Chain

    PubMed Central

    Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza

    2013-01-01

    Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689

  8. Computer vision challenges and technologies for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Molley, Perry A.

    1996-02-01

    Sandia National Laboratories, a Department of Energy laboratory, is responsible for maintaining the safety, security, reliability, and availability of the nuclear weapons stockpile for the United States. Because of the changing national and global political climates and inevitable budget cuts, Sandia is changing the methods and processes it has traditionally used in the product realization cycle for weapon components. Because of the increasing age of the nuclear stockpile, it is certain that the reliability of these weapons will degrade with time unless eventual action is taken to repair, requalify, or renew them. Furthermore, due to the downsizing of the DOE weapons production sites and loss of technical personnel, the new product realization process is being focused on developing and deploying advanced automation technologies in order to maintain the capability for producing new components. The goal of Sandia's technology development program is to create a product realization environment that is cost effective, has improved quality and reduced cycle time for small lot sizes. The new environment will rely less on the expertise of humans and more on intelligent systems and automation to perform the production processes. The systems will be robust in order to provide maximum flexibility and responsiveness for rapidly changing component or product mixes. An integrated enterprise will allow ready access to and use of information for effective and efficient product and process design. Concurrent engineering methods will allow a speedup of the product realization cycle, reduce costs, and dramatically lessen the dependency on creating and testing physical prototypes. Virtual manufacturing will allow production processes to be designed, integrated, and programed off-line before a piece of hardware ever moves. The overriding goal is to be able to build a large variety of new weapons parts on short notice. Many of these technologies that are being developed are also

  9. The Frequency Agile Solar Radiotelescope (FASR)

    NASA Astrophysics Data System (ADS)

    White, S. M.; Gary, D. E.; Bastian, T. S.; Hurford, G. J.; Lanzerotti, L. J.

    2003-04-01

    The Frequency Agile Solar Radiotelescope (FASR) is a radio interferometer designed to make high spatial resolution images of the Sun across a broad range of radio wavelengths simultaneously, allowing the technique of imaging spectroscopy to be exploited on a routine basis. The telescope will cover the frequency range 0.1-30 GHz using several sets of receiving elements that provide full-disk imaging, with of order 100 antennas at highest frequency range. FASR will be optimized for solar radio phenomena and will be the most powerful and versatile radioheliograph ever built, providing an improvement of orders of magnitude in image quality over existing instruments. FASR recently received the top ranking amongst all small projects considered by the decadal survey of the National Academy of Science Committee on Solar and Space Physics. FASR will probe all phenomena in the solar atmosphere from the mid-chromosphere outwards. In particular, FASR will provide direct measurement of coronal magnetic field strengths, will image the nonthermal solar atmosphere and show directly the locations of electrons accelerated by solar flares, will provide images of coronal mass ejections travelling outwwards through the solar corona, and supply extensive data products for forecasting and synoptic studies. A major emphasis in the project is to make FASR data as widely and easily used as possible, i.e., providing the general user with processed, fully-calibrated high-quality images that do not need particular knowledge of radio astronomy for interpretation. This paper will describe the telescope and its science goals, and summarize its current status.

  10. PDS4 - Some Principles for Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Algermissen, S.; Padams, J.

    2015-12-01

    PDS4, a research data management and curation system for NASA's Planetary Science Archive, was developed using principles that promote the characteristics of agile development. The result is an efficient system that produces better research data products while using less resources (time, effort, and money) and maximizes their usefulness for current and future scientists. The key principle is architectural. The PDS4 information architecture is developed and maintained independent of the infrastructure's process, application and technology architectures. The information architecture is based on an ontology-based information model developed to leverage best practices from standard reference models for digital archives, digital object registries, and metadata registries and capture domain knowledge from a panel of planetary science domain experts. The information model provides a sharable, stable, and formal set of information requirements for the system and is the primary source for information to configure most system components, including the product registry, search engine, validation and display tools, and production pipelines. Multi-level governance is also allowed for the effective management of the informational elements at the common, discipline, and project level. This presentation will describe the development principles, components, and uses of the information model and how an information model-driven architecture exhibits characteristics of agile curation including early delivery, evolutionary development, adaptive planning, continuous improvement, and rapid and flexible response to change.

  11. Alicyclobacillus Contamination in the Production Line of Kiwi Products in China

    PubMed Central

    Zhang, Jiangbo; Yue, Tianli; Yuan, Yahong

    2013-01-01

    Alicyclobacillus are spoilage microbes of many juice products, but contamination of kiwi products by Alicyclobacillus is seldom reported. This study aims to investigate the whole production line of kiwi products in China to assess the potential risk of their contamination. A total of 401 samples from 18 commercial products, 1 processing plant and 16 raw material orchards were tested, and 76 samples were positive, from which 76 strains of microbes were isolated and identified as 4 species of Alicyclobacillus, including Alicyclobacillus acidoterrestris, Alicyclobacillus contaminans, Alicyclobacillus herbarius and Alicyclobacillus cycloheptanicus, and another 9 strains as 3 species of Bacillus by sequencing of their 16S rDNA. Through phylogenetic tree construction and RAPD-PCR amplification, it was found that there exist genotypic diversities to some extent among these isolates. Four test strains (each from one species of the 4 Alicyclobacillus species isolated in this study) could spoil pH adjusted kiwi fruit juice and some commercial kiwi fruit products with producing guaiacol (11–34 ppb). PMID:23844069

  12. Lean and Agile: An Epistemological Reflection

    ERIC Educational Resources Information Center

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  13. A review of the Technologies Enabling Agile Manufacturing program

    SciTech Connect

    Gray, W.H.; Neal, R.E.; Cobb, C.K.

    1996-10-01

    Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

  14. Investigation Of In-Line Monitoring Options At H Canyon/HB Line For Plutonium Oxide Production

    SciTech Connect

    Sexton, L.

    2015-10-14

    H Canyon and HB Line have a production goal of 1 MT per year of plutonium oxide feedstock for the MOX facility by FY17 (AFS-2 mission). In order to meet this goal, steps will need to be taken to improve processing efficiency. One concept for achieving this goal is to implement in-line process monitoring at key measurement points within the facilities. In-line monitoring during operations has the potential to increase throughput and efficiency while reducing costs associated with laboratory sample analysis. In the work reported here, we mapped the plutonium oxide process, identified key measurement points, investigated alternate technologies that could be used for in-line analysis, and initiated a throughput benefit analysis.

  15. 40 CFR 1045.301 - When must I test my production-line engines?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... require you to test production-line engines under this subpart, or under 40 CFR part 1068, subpart E, even... described in 40 CFR part 1068. Individual engines in families that pass these production-line testing requirements must also conform to all applicable regulations of this part and 40 CFR part 1068. (d) You may...

  16. 40 CFR 1045.301 - When must I test my production-line engines?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... require you to test production-line engines under this subpart, or under 40 CFR part 1068, subpart E, even... described in 40 CFR part 1068. Individual engines in families that pass these production-line testing requirements must also conform to all applicable regulations of this part and 40 CFR part 1068. (d) You may...

  17. A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

    ERIC Educational Resources Information Center

    Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

    2012-01-01

    Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

  18. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Requirements for cell lines used for production of biologics. 113.52 Section 113.52 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS STANDARD REQUIREMENTS...

  19. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... production of biologics. 113.52 Section 113.52 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... STANDARD REQUIREMENTS Ingredient Requirements § 113.52 Requirements for cell lines used for production of biologics. When prescribed in an applicable Standard Requirement or in a filed Outline of Production...

  20. Agile and green manufacturing and super hard coated cutting tools

    SciTech Connect

    Chi-Hung Shen

    1995-12-31

    The paper discusses the global movement towards an agile and green manufacturing environment and their impacts on high volume producers such the automotive industry. In the area of machining, two major shifts are envision (1) proliferation of highly flexible CNC single spindle machining centers to replace conventional dedicated transfer lines and (2) implementation of {open_quotes}dry{close_quotes} machining systems where there are no or minimal use of machining fluids. In order to migrate towards these goals and still remain competitive and profitable, economically viable high performance super hard coated cutting tools must be developed. Machining results with CVD diamond coated tools are presented to illustrate their current capabilities and limitations. Key areas for further research and develop of super hard coating tools will also be discussed.

  1. Compact, Automated, Frequency-Agile Microspectrofluorimeter

    NASA Technical Reports Server (NTRS)

    Fernandez, Salvador M.; Guignon, Ernest F.

    1995-01-01

    Compact, reliable, rugged, automated cell-culture and frequency-agile microspectrofluorimetric apparatus developed to perform experiments involving photometric imaging observations of single live cells. In original application, apparatus operates mostly unattended aboard spacecraft; potential terrestrial applications include automated or semiautomated diagnosis of pathological tissues in clinical laboratories, biomedical instrumentation, monitoring of biological process streams, and portable instrumentation for testing biological conditions in various environments. Offers obvious advantages over present laboratory instrumentation.

  2. A model for simulating the grinding and classification cyclic system of waste PCBs recycling production line.

    PubMed

    Yang, Deming; Xu, Zhenming

    2011-09-15

    Crushing and separating technology is widely used in waste printed circuit boards (PCBs) recycling process. A set of automatic line without negative impact to environment for recycling waste PCBs was applied in industry scale. Crushed waste PCBs particles grinding and classification cyclic system is the most important part of the automatic production line, and it decides the efficiency of the whole production line. In this paper, a model for computing the process of the system was established, and matrix analysis method was adopted. The result showed that good agreement can be achieved between the simulation model and the actual production line, and the system is anti-jamming. This model possibly provides a basis for the automatic process control of waste PCBs production line. With this model, many engineering problems can be reduced, such as metals and nonmetals insufficient dissociation, particles over-pulverizing, incomplete comminuting, material plugging and equipment fever. PMID:21764511

  3. Design of Control System for Flexible Packaging Bags Palletizing Production Line Based on PLC

    NASA Astrophysics Data System (ADS)

    Zheng, Huiping; Chen, Lin; Zhao, Xiaoming; Liu, Zhanyang

    Flexible packaging bags palletizing production line is to put the bags in the required area according to particular order and size, in order to finish handling, storage, loading and unloading, transportation and other logistics work of goods. Flexible packaging bags palletizing line is composed of turning bags mechanism, shaping mechanism, indexing mechanism, marshalling mechanism, pushing bags mechanism, pressing bags mechanism, laminating mechanism, elevator, tray warehouse, tray conveyor and loaded tray conveyor. Whether the whole production line can smoothly run depends on each of the above equipment and precision control among them. In this paper the technological process and the control logic of flexible packaging bags palletizing production line is introduced. Palletizing process of the production line realized automation by means of a control system based on programmable logic controller (PLC). It has the advantages of simple structure, reliable and easy maintenance etc.

  4. Architecture-Centric Methods and Agile Approaches

    NASA Astrophysics Data System (ADS)

    Babar, Muhammad Ali; Abrahamsson, Pekka

    Agile software development approaches have had significant impact on industrial software development practices. Despite becoming widely popular, there is an increasing perplexity about the role and importance of a system’s software architecture in agile approaches [1, 2]. Advocates of the vital role of architecture in achieving quality goals of large-scale-software-intensive-systems are skeptics of the scalability of any development approach that does not pay sufficient attention to architectural issues. However, the proponents of agile approaches usually perceive the upfront design and evaluation of architecture as being of less value to the customers of a system. According to them, for example, re-factoring can help fix most of the problems. Many experiences show that large-scale re-factoring often results in significant defects, which are very costly to address later in the development cycle. It is considered that re-factoring is worthwhile as long as the high-level design is good enough to limit the need for large-scale re-factoring [1, 3, 4].

  5. First GRB detections with the AGILE Minicalorimeter

    SciTech Connect

    Marisaldi, M.; Labanti, C.; Fuschino, F.; Bulgarelli, A.; Gianotti, F.; Trifoglio, M.; Galli, M.; Tavani, M.; Argan, A.

    2008-05-22

    The Minicalorimeter (MCAL) onboard the AGILE satellite is a 1400 cm{sup 2} scintillation detector sensitive in the energy range 0.3-200 MeV. MCAL works both as a slave of the AGILE Silicon Tracker and as an autonomous detector for transient events (BURST mode). A dedicated onboard Burst Search logic scans BURST mode data in search of count rate increase. Peculiar characteristics of the detector are the high energy spectral coverage and a timing resolution of about 2 microseconds. Even if a trigger is not issued, BURST mode data are used to build a broad band energy spectrum (scientific ratemeters) organized in 11 bands for each of the two MCAL detection planes, with a time resolution of 1 second. After the first engineering commissioning phase, following the AGILE launch on 23rd April 2007, between 22nd June and 5th November 2007 eighteen GRBs were detected offline in the scientific ratemeters data, with a detection rate of about one per week. In this paper the capabilities of the detector will be described and an overview of the first detected GRBs will be given.

  6. Future Research in Agile Systems Development: Applying Open Innovation Principles Within the Agile Organisation

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Morgan, Lorraine

    A particular strength of agile approaches is that they move away from ‘introverted' development and intimately involve the customer in all areas of development, supposedly leading to the development of a more innovative and hence more valuable information system. However, we argue that a single customer representative is too narrow a focus to adopt and that involvement of stakeholders beyond the software development itself is still often quite weak and in some cases non-existent. In response, we argue that current thinking regarding innovation in agile development needs to be extended to include multiple stakeholders outside the business unit. This paper explores the intra-organisational applicability and implications of open innovation in agile systems development. Additionally, it argues for a different perspective of project management that includes collaboration and knowledge-sharing with other business units, customers, partners, and other relevant stakeholders pertinent to the business success of an organisation, thus embracing open innovation principles.

  7. Investigation of Freeze-Linings in Aluminum Production Cells

    NASA Astrophysics Data System (ADS)

    Fallah-Mehrjardi, Ata; Hayes, Peter C.; Jak, Evgueni

    2014-08-01

    The molten cryolite bath creates chemically a very aggressive environment in the Hall-Héroult cell, and thus, the formation of a protective solid layer (freeze-lining) on the cell wall is essential for the operation of the present cell designs. To provide further information on the formation of the freeze-lining deposit in this system, laboratory-based studies were undertaken using an air-cooled probe technique The effects of process conditions, i.e., time, bath agitation, and superheat on the microstructures, morphologies of the phases, and the phase assemblages adjacent to the deposit/bath interface were investigated. A detailed microstructural analysis of the steady-state deposits shows that a dense sealing primary-phase layer of cryolite solid solution was formed at the interface of the bath deposit for the process conditions examined. The formation of sealing primary-phase layer at the bath/deposit interface explicitly indicates that the deposit/liquid bath interface temperature is equal to that of the liquidus of the bulk bath. The experimentally investigated liquidus temperature and subliquidus equilibria differ significantly from those previously reported.

  8. Radiolytic hydrogen production from process vessels in HB line - production rates compared to evolution rates and discussion of LASL reviews

    SciTech Connect

    Bibler, N.E.

    1992-11-12

    Hydrogen production from radiolysis of aqueous solutions can create a safety hazard since hydrogen is flammable. At times this production can be significant, especially in HB line where nitric acid solutions containing high concentrations of Pu-238, an intense alpha emitter, are processed. The hydrogen production rates from these solutions are necessary for safety analyses of these process systems. The methods and conclusions of hydrogen production rate tests are provided in this report.

  9. New Claus and FCC catalyst production capacity on line

    SciTech Connect

    Not Available

    1983-07-01

    Two new, major catalyst manufacturing plants have recently gone into commercial operation in the U.S. In Louisiana, Aluminum Co. of America (Alcoa) last month put an activated alumina plant in production at Vidalia, La., on the Mississippi River near Natchez, Miss. Activated alumina after processing serves as, among other things, the catalyst in Claus sulfur recovery plants. In Georgia, Katalistiks International Inc. put its fluid catalytic cracking catalyst plant on stream in June, with an expected output of 60,000/80,000 tons/year of FFC catalyst. Alcoa says its Vidalia plant will have the capacity to make 20 million lb/year of either Claus catalyst or adsorbants, catalyst substrates, or combinations of such products. Management says it hopes to develop the catalyst plant's processing flexibility to make products for special and new applications. For the moment, the Vidalia plant will not make zeolites for fluid catalytic catalyst manufacturing though it has that capability. However, production of combinations of mixtures of alumina and zeolites is planned.

  10. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... production of biologics. 113.52 Section 113.52 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... Plant Health Inspection Service (APHIS) upon request for performing the tests prescribed in this section... line, such as, but not limited to, microscopic appearance, growth rate, acid production, or...

  11. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  12. AGILE detection of intense gamma-ray emission from the blazar PKS 1510-089

    NASA Astrophysics Data System (ADS)

    Pucella, G.; Vittorini, V.; D'Ammando, F.; Tavani, M.; Raiteri, C. M.; Villata, M.; Argan, A.; Barbiellini, G.; Boffelli, F.; Bulgarelli, A.; Caraveo, P.; Cattaneo, P. W.; Chen, A. W.; Cocco, V.; Costa, E.; Del Monte, E.; de Paris, G.; Di Cocco, G.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Fiorini, M.; Froysland, T.; Fuschino, F.; Galli, M.; Gianotti, F.; Giuliani, A.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Lipari, P.; Longo, F.; Marisaldi, M.; Mereghetti, S.; Morselli, A.; Pacciani, L.; Pellizzoni, A.; Perotti, F.; Picozza, P.; Prest, M.; Rapisarda, M.; Rappoldi, A.; Soffitta, P.; Trifoglio, M.; Trois, A.; Vallazza, E.; Vercellone, S.; Zambra, A.; Zanello, D.; Antonelli, L. A.; Colafrancesco, S.; Cutini, S.; Gasparrini, D.; Giommi, P.; Pittori, C.; Verrecchia, F.; Salotti, L.; Aller, M. F.; Aller, H. D.; Carosati, D.; Larionov, V. M.; Ligustri, R.

    2008-11-01

    Context: We report the detection by the AGILE (Astro-rivelatore Gamma a Immagini LEggero) satellite of an intense gamma-ray flare from the source AGL J1511-0909, associated with the powerful quasar PKS 1510-089, during ten days of observations from 23 August to 1 September 2007. Aims: During the observation period, the source was in optical decrease following a flaring event monitored by the GLAST-AGILE Support Program (GASP) of the Whole Earth Blazar Telescope (WEBT). The simultaneous gamma-ray, optical, and radio coverage allows us to study the spectral energy distribution and the theoretical models based on the synchrotron and inverse Compton (IC) emission mechanisms. Methods: AGILE observed the source with its two co-aligned imagers, the Gamma-Ray Imaging Detector and the hard X-ray imager Super-AGILE sensitive in the 30 MeV div 50 GeV and 18 div 60 keV bands, respectively. Results: Between 23 and 27 August 2007, AGILE detected gamma-ray emission from PKS 1510-089 when this source was located 50° off-axis, with an average flux of (270 ± 65) × 10-8 photons cm-2 s-1 for photon energy above 100 MeV. In the following period, 28 August-1 September, after a satellite re-pointing, AGILE detected the source at 35° off-axis, with an average flux (E > 100 MeV) of (195 ± 30) × 10-8 photons cm-2 s-1. No emission was detected by Super-AGILE, with a 3-σ upper limit of 45 mCrab in 200 ks. Conclusions: The spectral energy distribution is modelled with a homogeneous one-zone synchrotron self Compton (SSC) emission plus contributions by external photons: the SSC emission contributes primarily to the X-ray band, whereas the contribution of the IC from the external disc and the broad line region match the hard gamma-ray spectrum observed.

  13. Information logistics: A production-line approach to information services

    NASA Technical Reports Server (NTRS)

    Adams, Dennis; Lee, Chee-Seng

    1991-01-01

    Logistics can be defined as the process of strategically managing the acquisition, movement, and storage of materials, parts, and finished inventory (and the related information flow) through the organization and its marketing channels in a cost effective manner. It is concerned with delivering the right product to the right customer in the right place at the right time. The logistics function is composed of inventory management, facilities management, communications unitization, transportation, materials management, and production scheduling. The relationship between logistics and information systems is clear. Systems such as Electronic Data Interchange (EDI), Point of Sale (POS) systems, and Just in Time (JIT) inventory management systems are important elements in the management of product development and delivery. With improved access to market demand figures, logisticians can decrease inventory sizes and better service customer demand. However, without accurate, timely information, little, if any, of this would be feasible in today's global markets. Information systems specialists can learn from logisticians. In a manner similar to logistics management, information logistics is concerned with the delivery of the right data, to the ring customer, at the right time. As such, information systems are integral components of the information logistics system charged with providing customers with accurate, timely, cost-effective, and useful information. Information logistics is a management style and is composed of elements similar to those associated with the traditional logistics activity: inventory management (data resource management), facilities management (distributed, centralized and decentralized information systems), communications (participative design and joint application development methodologies), unitization (input/output system design, i.e., packaging or formatting of the information), transportations (voice, data, image, and video communication systems

  14. Early attempts at production of prawn cell lines.

    PubMed

    Owens, L; Smith, J

    1999-01-01

    This report describes some unsuccessful attempts to produce continuous cell lines from penaeid prawn tissues in the late 1980s. This information is presented so that others might save time by not repeating the unsuccessful measures that were attempted. The osmolarity of Penaeus monodon haemolymph was measured at 687 mOsmol/kg (N = 10). Of the media tested, the best medium for cell growth and maintenance was shown to be double strength L-15, supplemented with 10% foetal bovine serum, and 10% prawn muscle extract at 28 degrees C ( approximately 675.5 mOsmol/kg). Prawn muscle extract was made by homogenizing 30 g of prawn muscle in 50/50 ratio of distilled water/autoclaved seawater, clarified stepwise by centrifugation at 2k, 14k, 14k xg for 30 minutes each. The resultant supernatant was heat-inactivated on occasions with no improvement in growth. Preconditioned medium, cholesterol, galactose and trehalose supplements and the use of Cell-Tak did not improve growth conditions, and haemolymph extracts were detrimental to the cells. In addition it was shown that Nunc 25 cm(2) plastic culture flasks were better than Linbro and both were better than glass as substrates. The fate of 101 individual primary cell cultures, established from penaeid prawns, was as follows. Fifteen of the cultures succumbed to bacterial contamination, five became contaminated with fungi, four with thauastrochytrids, four succumbed to presumptive viral autocultures and two to ciliate contamination. Cell cultures derived from heart tissue could be maintained for a mean of 12.7 days (sd 9.7d), those derived from the epidermis 15.6 days (sd 9.0d), ovarian tissue 10 days (sd 2d), lymphoid organ 6.8 days (sd 0.4d), nerve cord and hepatopancreas 2 days. The most persistent cell cultures -- those derived from the heart explants -- contained dividing cells at 40 days, and epidermis cells were still dividing at 30 days. The longest lasting, non- proliferating, but viable, cell cultures were those of

  15. 75 FR 7563 - Certain Lined Paper Products from India: Notice of Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-22

    ...: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006) (Lined Paper... Preliminary Results of Antidumping Duty Administrative Review, 74 FR 51558 (October 7, 2009) (Preliminary.... See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR...

  16. 77 FR 53174 - Certain Lined Paper Products From Indonesia: Revocation of Antidumping and Countervailing Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-31

    ..., 76 FR 45778 (August 1, 2011) and Certain Lined Paper School Supplies From China, India, and Indonesia... Republic of China, 76 FR 76123 (December 6, 2011) and Certain Lined Paper Products From Indonesia: Final... Paper School Supplies From China, India, and Indonesia, 77 FR 51570 (August 24, 2012). See also...

  17. Supply chain network design problem for a new market opportunity in an agile manufacturing system

    NASA Astrophysics Data System (ADS)

    Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza

    2012-08-01

    The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.

  18. 40 CFR 1054.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Clean Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part... type of engine. (8) Provide the CumSum analysis required in § 1054.315 and the sample-size...

  19. 40 CFR 1051.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part 1051...) Provide the CumSum analysis required in § 1051.315 and the sample-size calculation required in §...

  20. 40 CFR 1054.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Clean Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part... type of engine. (8) Provide the CumSum analysis required in § 1054.315 and the sample-size...

  1. 40 CFR 1051.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part 1051...) Provide the CumSum analysis required in § 1051.315 and the sample-size calculation required in §...

  2. 40 CFR 1054.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Clean Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part... type of engine. (8) Provide the CumSum analysis required in § 1054.315 and the sample-size...

  3. 40 CFR 1051.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part 1051...) Provide the CumSum analysis required in § 1051.315 and the sample-size calculation required in §...

  4. Opitmizing a Beef Production System Using Specialized Sire and Dam Lines

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Crossbreeding is an effective method for improving efficiency of production in commercial cow-calf operations. It exploits available heterosis (hybrid vigor) and complementarity between different breeds or populations (lines). Before adopting a crossbreeding system, commercial cattle producers shou...

  5. Architecture-Based Unit Testing of the Flight Software Product Line

    NASA Technical Reports Server (NTRS)

    Ganesan, Dharmalingam; Lindvall, Mikael; McComas, David; Bartholomew, Maureen; Slegel, Steve; Medina, Barbara

    2010-01-01

    This paper presents an analysis of the unit testing approach developed and used by the Core Flight Software (CFS) product line team at the NASA GSFC. The goal of the analysis is to understand, review, and reconunend strategies for improving the existing unit testing infrastructure as well as to capture lessons learned and best practices that can be used by other product line teams for their unit testing. The CFS unit testing framework is designed and implemented as a set of variation points, and thus testing support is built into the product line architecture. The analysis found that the CFS unit testing approach has many practical and good solutions that are worth considering when deciding how to design the testing architecture for a product line, which are documented in this paper along with some suggested innprovennents.

  6. 77 FR 61742 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-11

    ...-Free Import of Capital Goods and Raw Materials 5. Market Development Assistance (MDA) 6. Market Access... Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28,...

  7. 78 FR 62584 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-22

    ... Goods and Raw Materials for Export Oriented Units (EOUs) VI. Conclusion BILLING CODE 3510-DS-P ... Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28,...

  8. Comparison of antibody molecules produced from two cell lines with contrasting productivities and aggregate contents.

    PubMed

    Ishii, Yoichi; Imamoto, Yasufumi; Yamamoto, Rie; Tsukahara, Masayoshi; Wakamatsu, Kaori

    2015-01-01

    Cell culture processes that produce therapeutic antibodies with high productivity (titer) and low aggregate content reduce the risk of adverse effects and expense to patients. To elucidate the mechanism of aggregate formation, we compared trastuzumab samples produced from two contrasting cell lines: cell line A, which exhibits high titer and low aggregate content, and cell line B, which exhibits low titer and high aggregate content. Cell line B produced significantly fewer (approximately 1/3) antibodies compared with cell line A and contained higher (approximately 3-fold) percentages of aggregates. The aggregates of antibodies found in the protein A-purified samples of cell line B were associated mostly with noncovalent interactions. Cell line B exhibited a low content of monomers/dimers of light chains in the medium and within cells. Because light chains are essential for the correct folding of heavy chains and secretion of mature antibodies, the characteristics of cell line B may be attributed to low levels of light chain production. In addition, protein A-purified antibodies from cell line B (but not those from cell line A) contained fragments that are expected to expose the hydrophobic CH3 domain, which may serve as nuclei for aggregation. PMID:25501618

  9. Increasing Student Interest and Comprehension of Production Planning and Control and Operations Performance Measurement Concepts Using a Production Line Game

    ERIC Educational Resources Information Center

    Cox, James F., III; Walker, Edward D., II

    2005-01-01

    Production planning and control (PPC) systems and operations performance measures are topics that students generally find both boring and difficult to understand. In the article, the authors present a production line game that they have found to be an effective tool to increase student interest in the topics as well as student comprehension. The…

  10. Lines

    ERIC Educational Resources Information Center

    Mires, Peter B.

    2006-01-01

    National Geography Standards for the middle school years generally stress the teaching of latitude and longitude. There are many creative ways to explain the great grid that encircles our planet, but the author has found that students in his college-level geography courses especially enjoy human-interest stories associated with lines of latitude…

  11. Lithography line productivity impact using Cymer GLX technology

    NASA Astrophysics Data System (ADS)

    O'Brien, Kevin; Dunstan, Wayne; Jacques, Robert; Brown, Daniel

    2009-03-01

    Leading-edge scanners in fabs worldwide have particularly high system utilization and require peak levels of system throughput and availability. Laser gas exchanges typically occur daily on these systems (or every 100M pulses or less), with each exchange lasting up to 20 minutes. This downtime has a direct negative effect on availability, and if it is reduced, the productivity of the litho cell increases. This paper will outline the immediate success fabs have experienced after equipping scanners with Cymer's Gas Lifetime eXtension (GLXTM) technology, which increases scanner availability by extending the time between excimer laser gas exchanges by a factor of more than 10. To date, more than 100 leading-edge scanners feature Cymer's GLX technology, which has improved light source availability by more than 1.5 percent. Moreover, multiple chipmakers report more than 2 percent improvement in litho cell productivity due to GLX, corresponding to 2000 wafers/month increase for a 100,000 wafers/month fab. The increase in measured productivity is the leveraged benefit of reducing process interruptions around the refill cycle GLX technology extends the shot-based interval between gas refills to 1 billion pulses for Cymer's XLA light sources, and provides excellent stability in key optical performance parameters, such as bandwidth and dose stability over the entire gas life. This paper will provide extensive performance data during extended light source operation on litho cells equipped with GLX technology, and multiple use scenarios will be examined, including usage at memory and logic fabs. The paper will also discuss the performance of GLX2TM technology which further extends the maximum time between light source gas exchanges from 1B pulses to 2B pulses, and reduces downtime associated with gas refills by a factor of 20. The stability and productivity benefits of this new technology can be realized under all light source utilization scenarios. With GLX2, the refill

  12. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  13. Designing of robotic production lines using CAx software

    NASA Astrophysics Data System (ADS)

    Wróbel, A.; Langer, P.

    2015-11-01

    Present market conditions causes that modern control systems of robotized manufacturing cells should be characterized by the much greater degree of flexibility, selforganization and, above all, adaptability to emerging outer excitations. The phenomenon of information distribution is one of the most important features of modern control systems. In the paper is presented the approach, based on application of multi-agent systems, for supporting the operation of robotized manufacturing cells. The aim of this approach is to obtain the flexible response to outer excitations and preventing situations that might cause the delay of the production process. The presented paper includes description of the concept of an informatics system designed for controlling the work of production systems, including work cells. Such systems could operate independently if it would be equipped with the selforganization mechanism. It is possible in the case of the proposed multi-agent system. The implementation of the presented concept will follow the present analysis of the described concept. The advantage of the proposed concept is its hierarchical depiction that allows integrating different utilized informatics tools in one complex system. It allows preparing the final computer program.

  14. Product-line selection and pricing with remanufacturing under availability constraints

    NASA Astrophysics Data System (ADS)

    Aras, Necati; Esenduran, G.÷k.‡e.; Altinel, I. Kuban

    2004-12-01

    Product line selection and pricing are two crucial decisions for the profitability of a manufacturing firm. Remanufacturing, on the other hand, may be a profitable strategy that captures the remaining value in used products. In this paper we develop a mixed-integer nonlinear programming model form the perspective of an original equipment manufacturer (OEM). The objective of the OEM is to select products to manufacture and remanufacture among a set of given alternatives and simultaneously determine their prices so as to maximize its profit. It is assumed that the probability a customer selects a product is proportional to its utility and inversely proportional to its price. The utility of a product is an increasing function of its perceived quality. In our base model, products are discriminated by their unit production costs and utilities. We also analyze a case where remanufacturing is limited by the available quantity of collected remanufacturable products. We show that the resulting problem is decomposed into the pricing and product line selection subproblems. Pricing problem is solved by a variant of the simplex search procedure which can also handle constraints, while complete enumeration and a genetic algorithm are used for the solution of the product line selection problem. A number of experiments are carried out to identify conditions under which it is economically viable for the firm to sell remanufactured products. We also determine the optimal utility and unit production cost values of a remanufactured product, which maximizes the total profit of the OEM.

  15. Agile informatics: application of agile project management to the development of a personal health application.

    PubMed

    Chung, Jeanhee; Pankey, Evan; Norris, Ryan J

    2007-01-01

    We describe the application of the Agile method-- a short iteration cycle, user responsive, measurable software development approach-- to the project management of a modular personal health record, iHealthSpace, to be deployed to the patients and providers of a large academic primary care practice. PMID:18694014

  16. The modular design of robotic workcells in a flexible production line

    NASA Astrophysics Data System (ADS)

    Banas, W.; Sekala, A.; Gwiazda, A.; Foit, K.; Hryniewicz, P.; Kost, G.

    2015-11-01

    In the case of large-scale and mass production lines often the same model of an industrial robot is used in various places of the line and is intended to various task. However, the replacement of one industrial robot to another is a long lasting and arduous process. It requires stopping all the production line and sometimes even dismantling the whole workcell. Such situations are not frequent in production lines that are not flexible. They are related the most often with the failure on an industrial robot. However, during the designing of a flexible production line the ability to replace any robot, which is unrestricted, fast and trouble-free, greatly increase the flexibility level of such line. It could be realized by modular design of the proposed production line. In this way it could be possible to change any elements of such production system. But this approach needs to apply the specialized informatics system. This paper presents the obtained design of several versions of the same production workcell. Each, succeeding version of the designed production workcell contains more and more modular elements. Thereby it would be presented the evolution of a workcell design beginning from the typical design and ending with the fully modular one. One of tools needed to realize this task is the elaboration of a base of modules and typical joint and mounting elements that could be utilised in the described designing process. It is also presented the guidance information about the designing and programming processes useful at each stage of analysed process.

  17. 40 CFR 1051.310 - How must I select vehicles or engines for production-line testing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for production-line testing? 1051.310 Section 1051.310 Protection of Environment ENVIRONMENTAL... VEHICLES Testing Production-Line Vehicles and Engines § 1051.310 How must I select vehicles or engines for production-line testing? (a) Test engines from each engine family as described in this section based on...

  18. 40 CFR 1051.325 - What happens if an engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the production-line testing requirements? 1051.325 Section 1051.325 Protection of Environment... ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.325 What happens if an engine family fails the production-line testing requirements? (a) We may suspend your certificate of...

  19. 40 CFR 1054.325 - What happens if an engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the production-line testing requirements? 1054.325 Section 1054.325 Protection of Environment... SPARK-IGNITION ENGINES AND EQUIPMENT Production-line Testing § 1054.325 What happens if an engine family fails the production-line testing requirements? (a) We may suspend your certificate of conformity for...

  20. 40 CFR 1042.325 - What happens if an engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the production-line testing requirements? 1042.325 Section 1042.325 Protection of Environment... MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Testing Production-line Engines § 1042.325 What happens if an engine family fails the production-line testing requirements? (a) We may suspend...

  1. Development of an agility assessment module for preliminary fighter design

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

    1996-01-01

    A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

  2. Agile Methods for Open Source Safety-Critical Software

    PubMed Central

    Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-01-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the right amount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  3. Agile Bodies: A New Imperative in Neoliberal Governance

    ERIC Educational Resources Information Center

    Gillies, Donald

    2011-01-01

    Modern business discourse suggests that a key bulwark against market fluctuation and the threat of failure is for organizations to become "agile'", a more dynamic and proactive position than that previously afforded by mere "flexibility". The same idea is also directed at the personal level, it being argued that the "agile" individual is better…

  4. Agile Methods for Open Source Safety-Critical Software.

    PubMed

    Gary, Kevin; Enquobahrie, Andinet; Ibanez, Luis; Cheng, Patrick; Yaniv, Ziv; Cleary, Kevin; Kokoori, Shylaja; Muffih, Benjamin; Heidenreich, John

    2011-08-01

    The introduction of software technology in a life-dependent environment requires the development team to execute a process that ensures a high level of software reliability and correctness. Despite their popularity, agile methods are generally assumed to be inappropriate as a process family in these environments due to their lack of emphasis on documentation, traceability, and other formal techniques. Agile methods, notably Scrum, favor empirical process control, or small constant adjustments in a tight feedback loop. This paper challenges the assumption that agile methods are inappropriate for safety-critical software development. Agile methods are flexible enough to encourage the rightamount of ceremony; therefore if safety-critical systems require greater emphasis on activities like formal specification and requirements management, then an agile process will include these as necessary activities. Furthermore, agile methods focus more on continuous process management and code-level quality than classic software engineering process models. We present our experiences on the image-guided surgical toolkit (IGSTK) project as a backdrop. IGSTK is an open source software project employing agile practices since 2004. We started with the assumption that a lighter process is better, focused on evolving code, and only adding process elements as the need arose. IGSTK has been adopted by teaching hospitals and research labs, and used for clinical trials. Agile methods have matured since the academic community suggested they are not suitable for safety-critical systems almost a decade ago, we present our experiences as a case study for renewing the discussion. PMID:21799545

  5. Agile manufacturing in Intelligence, Surveillance and Reconnaissance (ISR)

    NASA Astrophysics Data System (ADS)

    DiPadua, Mark; Dalton, George

    2016-05-01

    The objective of the Agile Manufacturing for Intelligence, Surveillance, and Reconnaissance (AMISR) effort is to research, develop, design and build a prototype multi-intelligence (multi-INT), reconfigurable pod demonstrating benefits of agile manufacturing and a modular open systems approach (MOSA) to make podded intelligence, surveillance, and reconnaissance (ISR) capability more affordable and operationally flexible.

  6. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

  7. A Roadmap for Using Agile Development in a Traditional Environment

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

    2006-01-01

    One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

  8. Supporting Development of Satellite's Guidance Navigation and Control Software: A Product Line Approach

    NASA Technical Reports Server (NTRS)

    McComas, David; Stark, Michael; Leake, Stephen; White, Michael; Morisio, Maurizio; Travassos, Guilherme H.; Powers, Edward I. (Technical Monitor)

    2000-01-01

    The NASA Goddard Space Flight Center Flight Software Branch (FSB) is developing a Guidance, Navigation, and Control (GNC) Flight Software (FSW) product line. The demand for increasingly more complex flight software in less time while maintaining the same level of quality has motivated us to look for better FSW development strategies. The GNC FSW product line has been planned to address the core GNC FSW functionality very similar on many recent low/near Earth missions in the last ten years. Unfortunately these missions have not accomplished significant drops in development cost since a systematic approach towards reuse has not been adopted. In addition, new demands are continually being placed upon the FSW which means the FSB must become more adept at providing GNC FSW functionality's core so it can accommodate additional requirements. These domain features together with engineering concepts are influencing the specification, description and evaluation of FSW product line. Domain engineering is the foundation for emerging product line software development approaches. A product line is 'A family of products designed to take advantage of their common aspects and predicted variabilities'. In our product line approach, domain engineering includes the engineering activities needed to produce reusable artifacts for a domain. Application engineering refers to developing an application in the domain starting from reusable artifacts. The focus of this paper is regarding the software process, lessons learned and on how the GNC FSW product line manages variability. Existing domain engineering approaches do not enforce any specific notation for domain analysis or commonality and variability analysis. Usually, natural language text is the preferred tool. The advantage is the flexibility and adapt ability of natural language. However, one has to be ready to accept also its well-known drawbacks, such as ambiguity, inconsistency, and contradictions. While most domain analysis

  9. Product-line administration: a framework for redefining medical record department services.

    PubMed

    Postal, S N

    1990-06-01

    Product-line administration is a viable approach for managing medical records services in an environment that demands high quantity and quality service levels. Product-line administration directs medical record department team members to look outside of the department and seek input from the customers it is intended to serve. The feedback received may be alarming at first, as the current state of products usually reveals a true lack of customer input. As the planning, defining, managing, and marketing phases are implemented, the road will not be easy and rewards will be slow to come. Product-line administration does not provide quick fixes, but it does provide long-term problem resolution as products are refined and new products developed to meet customer needs and expectations. In addition to better meeting the needs of the department's external customers, the department's internal customers' needs and expectations will be addressed. The participative management approach will help nurture each team member's creativity. The team members will have the opportunity to reach their full potential while reaping the rewards and benefits of providing products and services that meet the needs and expectations of all department customers. The future of the health care industry promises more changes as the country moves toward some form of prospective payment in the ambulatory setting. Reactive management and the constant struggle to catch up can no longer be accepted as a management approach. It is imperative that the medical record department be viewed as a business with product lines composed of quality products. The planning, defining, managing, and marketing components of product-line administration afford responsiveness to the current situation and the development of quality products that will ensure that medical record departments are prepared for the future. PMID:10106655

  10. 40 CFR 1054.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... information to your written report so we can determine whether your new engines conform with the requirements... Clean Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part 1054. We have not changed production processes or quality-control procedures for test engines in a...

  11. 40 CFR 1051.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... your written report, so we can determine whether your new vehicles conform with the requirements of... Air Act. Our production-line testing conformed completely with the requirements of 40 CFR part 1051. We have not changed production processes or quality-control procedures for test engines (or...

  12. Integrating Theory and Practice: Applying the Quality Improvement Paradigm to Product Line Engineering

    NASA Technical Reports Server (NTRS)

    Stark, Michael; Hennessy, Joseph F. (Technical Monitor)

    2002-01-01

    My assertion is that not only are product lines a relevant research topic, but that the tools used by empirical software engineering researchers can address observed practical problems. Our experience at NASA has been there are often externally proposed solutions available, but that we have had difficulties applying them in our particular context. We have also focused on return on investment issues when evaluating product lines, and while these are important, one can not attain objective data on success or failure until several applications from a product family have been deployed. The use of the Quality Improvement Paradigm (QIP) can address these issues: (1) Planning an adoption path from an organization's current state to a product line approach; (2) Constructing a development process to fit the organization's adoption path; (3) Evaluation of product line development processes as the project is being developed. The QIP consists of the following six steps: (1) Characterize the project and its environment; (2) Set quantifiable goals for successful project performance; (3) Choose the appropriate process models, supporting methods, and tools for the project; (4) Execute the process, analyze interim results, and provide real-time feedback for corrective action; (5) Analyze the results of completed projects and recommend improvements; and (6) Package the lessons learned as updated and refined process models. A figure shows the QIP in detail. The iterative nature of the QIP supports an incremental development approach to product lines, and the project learning and feedback provide the necessary early evaluations.

  13. Introduction to Stand-up Meetings in Agile Methods

    NASA Astrophysics Data System (ADS)

    Hasnain, Eisha; Hall, Tracy

    2009-05-01

    In recent years, agile methods have become more popular in the software industry. Agile methods are a new approach compared to plan-driven approaches. One of the most important shifts in adopting an agile approach is the central focus given to people in the process. This is exemplified by the independence afforded to developers in the development work they do. This work investigates the opinions of practitioners about daily stand-up meetings in the agile methods and the role of developer in that. For our investigation we joined a yahoo group called "Extreme Programming". Our investigation suggests that although trust is an important factor in agile methods. But stand-ups are not the place to build trust.

  14. Supporting Agile Development of Authorization Rules for SME Applications

    NASA Astrophysics Data System (ADS)

    Bartsch, Steffen; Sohr, Karsten; Bormann, Carsten

    Custom SME applications for collaboration and workflow have become affordable when implemented as Web applications employing Agile methodologies. Security engineering is still difficult with Agile development, though: heavy-weight processes put the improvements of Agile development at risk. We propose Agile security engineering and increased end-user involvement to improve Agile development with respect to authorization policy development. To support the authorization policy development, we introduce a simple and readable authorization rules language implemented in a Ruby on Rails authorization plugin that is employed in a real-world SME collaboration and workflow application. Also, we report on early findings of the language’s use in authorization policy development with domain experts.

  15. A Case Study of Coordination in Distributed Agile Software Development

    NASA Astrophysics Data System (ADS)

    Hole, Steinar; Moe, Nils Brede

    Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

  16. Frequency-agile wireless sensor networks

    NASA Astrophysics Data System (ADS)

    Arms, Steven W.; Townsend, Christopher P.; Churchill, David L.; Hamel, Michael J.; Galbreath, Jacob H.; Mundell, Steven W.

    2004-07-01

    Our goal was to demonstrate a wireless communications system capable of simultaneous, high speed data communications from a variety of sensors. We have previously reported on the design and application of 2 KHz data logging transceiver nodes, however, only one node may stream data at a time, since all nodes on the network use the same communications frequency. To overcome these limitations, second generation data logging transceivers were developed with software programmable radio frequency (RF) communications. Each node contains on-board memory (2 Mbytes), sensor excitation, instrumentation amplifiers with programmable gains & offsets, multiplexer, 16 bit A/D converter, microcontroller, and frequency agile, bi-directional, frequency shift keyed (FSK) RF serial data link. These systems are capable of continuous data transmission from 26 distinct nodes (902-928 MHz band, 75 kbaud). The system was demonstrated in a compelling structural monitoring application. The National Parks Service requested a means for continual monitoring and recording of sensor data from the Liberty Bell during a move to a new location (Philadelphia, October 2003). Three distinct, frequency agile, wireless sensing nodes were used to detect visible crack shear/opening micromotions, triaxial accelerations, and hairline crack tip strains. The wireless sensors proved to be useful in protecting the Liberty Bell.

  17. Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

    PubMed Central

    Lai, Tingfeng; Yang, Yuansheng; Ng, Say Kong

    2013-01-01

    From 2006 to 2011, an average of 15 novel recombinant protein therapeutics have been approved by US Food and Drug Administration (FDA) annually. In addition, the expiration of blockbuster biologics has also spurred the emergence of biosimilars. The increasing numbers of innovator biologic products and biosimilars have thus fuelled the demand of production cell lines with high productivity. Currently, mammalian cell line development technologies used by most biopharmaceutical companies are based on either the methotrexate (MTX) amplification technology or the glutamine synthetase (GS) system. With both systems, the cell clones obtained are highly heterogeneous, as a result of random genome integration by the gene of interest and the gene amplification process. Consequently, large numbers of cell clones have to be screened to identify rare stable high producer cell clones. As such, the cell line development process typically requires 6 to 12 months and is a time, capital and labour intensive process. This article reviews established advances in protein expression and clone screening which are the core technologies in mammalian cell line development. Advancements in these component technologies are vital to improve the speed and efficiency of generating robust and highly productive cell line for large scale production of protein therapeutics. PMID:24276168

  18. A Control System for Tobacco Shred Production Line Based on Industrial Ethernet

    NASA Astrophysics Data System (ADS)

    Zhang, Li; Zheng, Guang; Zhang, Xinfeng; Liu, Lei; Xi, Lei

    The Industrial Ethernet based on IP realizes interconnection of industrial network and information network, and it is the most potential technology in the new industrial net products. In this paper, the defects of the original control system for tobacco shred production line are analyzed, and the new design plan of control system based on EtherNet/IP is presented. The control net adopts redundant 1000M fiber optic ring network that consists of six managed Industrial Ethernet Switches, and they are distributed to the central control room, leaf processing line, shred processing line, mixed stem shred processing line, online mositure regain processing line and cut tobacco dryer control cabinet. The switch in the central control room works in the pattern of redundancy management, which can switch the link in the event of the failure in link of ring net, the recovery time of link line is less than 500ms, and each main PLC of control section has dual Network Adapters. The plan has been applied for reform of 5000kg/h Tobacco Primary Processing Line in Nanyang Cigarette Factory of China Tobacco Henan Industrial Corporation, and the configurable software and Industry Ethernet network which has been used promots the capability of automatic control system fundamentally, showing much better transmission efficiency and reliability, realizing the goal of high cost performance and making equipment's ability of handling grow fast.

  19. Thermonuclear breakup reactions of light nuclei. II - Gamma-ray line production and other applications

    NASA Technical Reports Server (NTRS)

    Guessoum, Nidhal

    1989-01-01

    The main consequence of nuclear breakup reactions in high-temperature plasmas is shown to be to reduce the production of the gamma-ray lines, due to the breakup of these species at high temperature. Results of the emissivities of all the relevant gamma-ray lines are discussed. It is shown that the magnitude of the breakup effect on the line emissivities depends strongly on temperature, but more importantly on the plasma density and on the available time for the ion processes. Other effects considered include the production of neutrons (from the breakup of helium) and its consequences (such as the production of gamma rays from n-capture reactions and dynamical effects in accretion disk plasmas).

  20. Designing cell lines for viral vaccine production: Where do we stand?

    PubMed

    Genzel, Yvonne

    2015-05-01

    Established animal cells, such as Vero, Madin Darby canine kidney (MDCK) or chicken embryo fibroblasts (CEFs), are still the main cell lines used for viral vaccine production, although new "designer cells" have been available for some years. These designer cell lines were specifically developed as a cell substrate for one application and are well characterized. Later screening for other possible applications widened the product range. These cells grow in suspension in chemically defined media under controlled conditions and can be used for up to 100 passages. Scale-up is easier and current process options allow cultivation in disposable bioreactors at cell concentrations higher than 1 × 10(7) cells/mL. This review covers the limitations of established cell lines and discusses the requirements and screening options for new host cells. Currently available designer cells for viral vaccine production (PER.C6, CAP, AGE1.CR, EB66 cells), together with other new cell lines (PBS-1, QOR/2E11, SogE, MFF-8C1 cells) that were recently described as possible cell substrates are presented. Using current process knowledge and cell line development tools, future upstream processing could resemble today's Chinese hamster ovary (CHO) cell processes for monoclonal antibody production: small scale bioreactors (disposable) in perfusion or fed-batch mode with cell concentrations above 1 × 10(8) cells/mL. PMID:25903999

  1. 76 FR 20954 - Certain Lined Paper Products From India: Amended Final Determination of Sales at Less Than Fair...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-14

    ... Lined Paper Products from India, 71 FR 45012 (August 8, 2006) (``Final Determination''). \\3\\ Notice of... Administrative Review, 74 FR 17149 (April 14, 2009); Certain Lined Paper Products from India: Notice of Final Results of Antidumping Duty Administrative Review, 75 FR 7563 (February 22, 2010); Certain Lined...

  2. Wavelength-Agile Optical Sensor for Exhaust Plume and Cryogenic Fluid Interrogation

    NASA Technical Reports Server (NTRS)

    Sanders, Scott T.; Chiaverini, Martin J.; Gramer, Daniel J.

    2004-01-01

    Two optical sensors developed in UW-Madison labs were evaluated for their potential to characterize rocket engine exhaust plumes and liquid oxygen (LOX) fluid properties. The plume sensor is based on wavelength-agile absorption spectroscopy A device called a chirped white pulse emitter (CWPE) is used to generate the wavelength agile light, scanning, for example, 1340 - 1560 nm every microsecond. Properties of the gases in the rocket plume (for example temperature and water mole fraction) can be monitored using these wavelength scans. We have performed preliminary tests in static gas cells, a laboratory GOX/GH2 thrust chamber, and a solid-fuel hybrid thrust chamber, and these initial tests demonstrate the potential of the CWPE for monitoring rocket plumes. The LOX sensor uses an alternative to wavelength agile sensing: two independent, fixed-wavelength lasers are combined into a single fiber. One laser is absorbed by LOX and the other not: by monitoring the differential transmission the LOX concentration in cryogenic feed lines can be inferred. The sensor was successful in interrogating static LOX pools in laboratory tests. Even in ice- and bubble-laden cryogenic fluids, LOX concentrations were measured to better than 1% with a 3 microsec time constant.

  3. Agile: From Software to Mission System

    NASA Technical Reports Server (NTRS)

    Trimble, Jay; Shirley, Mark H.; Hobart, Sarah Groves

    2016-01-01

    The Resource Prospector (RP) is an in-situ resource utilization (ISRU) technology demonstration mission, designed to search for volatiles at the Lunar South Pole. This is NASA's first near real time tele-operated rover on the Moon. The primary objective is to search for volatiles at one of the Lunar Poles. The combination of short mission duration, a solar powered rover, and the requirement to explore shadowed regions makes for an operationally challenging mission. To maximize efficiency and flexibility in Mission System design and thus to improve the performance and reliability of the resulting Mission System, we are tailoring Agile principles that we have used effectively in ground data system software development and applying those principles to the design of elements of the mission operations system.

  4. Compact, flexible, frequency agile parametric wavelength converter

    DOEpatents

    Velsko, Stephan P.; Yang, Steven T.

    2002-01-01

    This improved Frequency Agile Optical Parametric Oscillator provides near on-axis pumping of a single QPMC with a tilted periodically poled grating to overcome the necessity to find a particular crystal that will permit collinear birefringence in order to obtain a desired tuning range. A tilted grating design and the elongation of the transverse profile of the pump beam in the angle tuning plane of the FA-OPO reduces the rate of change of the overlap between the pumped volume in the crystal and the resonated and non-resonated wave mode volumes as the pump beam angle is changed. A folded mirror set relays the pivot point for beam steering from a beam deflector to the center of the FA-OPO crystal. This reduces the footprint of the device by as much as a factor of two over that obtained when using the refractive telescope design.

  5. The contribution of dissociative processes to the production of atomic lines in hydrogen plasmas

    NASA Technical Reports Server (NTRS)

    Kunc, J. A.

    1985-01-01

    The contribution of molecular dissociative processes to the production of atomic lines is considered for a steady-state hydrogen plasma. If the contribution of dissociative processes is dominant, a substantial simplification in plasma diagnostics can be achieved. Numerical calculations have been performed for the production of Balmer alpha, beta, and gamma lines in hydrogen plasmas with medium and large degrees of ionization (x greater than about 0.0001) and for electron temperatures of 5000-45,000 K and electron densities of 10 to the 10th to 10 to the 16th/cu cm.

  6. Verhulst and stochastic models for comparing mechanisms of MAb productivity in six CHO cell lines.

    PubMed

    Shirsat, Nishikant; Avesh, Mohd; English, Niall J; Glennon, Brian; Al-Rubeai, Mohamed

    2016-08-01

    The present study validates previously published methodologies-stochastic and Verhulst-for modelling the growth and MAb productivity of six CHO cell lines grown in batch cultures. Cytometric and biochemical data were used to model growth and productivity. The stochastic explanatory models were developed to improve our understanding of the underlying mechanisms of growth and productivity, whereas the Verhulst mechanistic models were developed for their predictability. The parameters of the two sets of models were compared for their biological significance. The stochastic models, based on the cytometric data, indicated that the productivity mechanism is cell specific. However, as shown before, the modelling results indicated that G2 + ER indicate high productivity, while G1 + ER indicate low productivity, where G1 and G2 are the cell cycle phases and ER is Endoplasmic Reticulum. In all cell lines, growth proved to be inversely proportional to the cumulative G1 time (CG1T) for the G1 phase, whereas productivity was directly proportional to ER. Verhulst's rule, "the lower the intrinsic growth factor (r), the higher the growth (K)," did not hold for growth across all cell lines but held good for the cell lines with the same growth mechanism-i.e., r is cell specific. However, the Verhulst productivity rule, that productivity is inversely proportional to the intrinsic productivity factor (r x ), held well across all cell lines in spite of differences in their mechanisms for productivity-that is, r x is not cell specific. The productivity profile, as described by Verhulst's logistic model, is very similar to the Michaelis-Menten enzyme kinetic equation, suggesting that productivity is more likely enzymatic in nature. Comparison of the stochastic and Verhulst models indicated that CG1T in the cytometric data has the same significance as r, the intrinsic growth factor in the Verhulst models. The stochastic explanatory and the Verhulst logistic models can explain the

  7. Agile parallel bioinformatics workflow management using Pwrake

    PubMed Central

    2011-01-01

    Background In bioinformatics projects, scientific workflow systems are widely used to manage computational procedures. Full-featured workflow systems have been proposed to fulfil the demand for workflow management. However, such systems tend to be over-weighted for actual bioinformatics practices. We realize that quick deployment of cutting-edge software implementing advanced algorithms and data formats, and continuous adaptation to changes in computational resources and the environment are often prioritized in scientific workflow management. These features have a greater affinity with the agile software development method through iterative development phases after trial and error. Here, we show the application of a scientific workflow system Pwrake to bioinformatics workflows. Pwrake is a parallel workflow extension of Ruby's standard build tool Rake, the flexibility of which has been demonstrated in the astronomy domain. Therefore, we hypothesize that Pwrake also has advantages in actual bioinformatics workflows. Findings We implemented the Pwrake workflows to process next generation sequencing data using the Genomic Analysis Toolkit (GATK) and Dindel. GATK and Dindel workflows are typical examples of sequential and parallel workflows, respectively. We found that in practice, actual scientific workflow development iterates over two phases, the workflow definition phase and the parameter adjustment phase. We introduced separate workflow definitions to help focus on each of the two developmental phases, as well as helper methods to simplify the descriptions. This approach increased iterative development efficiency. Moreover, we implemented combined workflows to demonstrate modularity of the GATK and Dindel workflows. Conclusions Pwrake enables agile management of scientific workflows in the bioinformatics domain. The internal domain specific language design built on Ruby gives the flexibility of rakefiles for writing scientific workflows. Furthermore, readability

  8. 75 FR 28616 - Agilent Technologies, Inc.; Analysis of the Agreement Containing Consent Order to Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-21

    ... and services. Agilent's broad range of products and services includes equipment used to test cell... analytical techniques to test samples of many types, are used by academic researchers, forensics laboratories... by ICP-MS, and because many customers perform tests pursuant to regulatory guidelines, they would...

  9. Mars Observer data production, transfer, and archival: The data production assembly line

    NASA Technical Reports Server (NTRS)

    Childs, David B.

    1993-01-01

    This paper describes the data production, transfer, and archival process designed for the Mars Observer Flight Project. It addresses the developmental and operational aspects of the archive collection production process. The developmental aspects cover the design and packaging of data products for archival and distribution to the planetary community. Also discussed is the design and development of a data transfer and volume production process capable of handling the large throughput and complexity of the Mars Observer data products. The operational aspects cover the main functions of the process: creating data and engineering products, collecting the data products and ancillary products in a central repository, producing archive volumes, validating volumes, archiving, and distributing the data to the planetary community.

  10. New Product Marketing Blurs the Line Between Nicotine Replacement Therapy and Smokeless Tobacco Products.

    PubMed

    Kostygina, Ganna; England, Lucinda; Ling, Pamela

    2016-07-01

    Tobacco companies have begun to acquire pharmaceutical subsidiaries and recently started to market nicotine replacement therapies, such as Zonnic nicotine gum, in convenience stores. Conversely, tobacco companies are producing tobacco products such as tobacco chewing gum and lozenges that resemble pharmaceutical nicotine replacement products, including a nicotine pouch product that resembles snus pouches. This convergence of nicotine and tobacco product marketing has implications for regulation and tobacco cessation. PMID:27077338

  11. Development of at-line assay to monitor charge variants of MAbs during production.

    PubMed

    St Amand, M M; Ogunnaike, B A; Robinson, A S

    2014-01-01

    One major challenge currently facing the biopharmaceutical industry is to understand how MAb microheterogeneity affects therapeutic efficacy, potency, immunogenicity, and clearance. MAb micro-heterogeneity can result from post-translational modifications such as sialylation, galactosylation, C-terminal lysine cleavage, glycine amidation, and tryptophan oxidation, each of which can generate MAb charge variants; such heterogeneity can affect pharmacokinetics (PK) considerably. Implementation of appropriate on-line quality control strategies may help to regulate bioprocesses, thus enabling more homogenous material with desired post-translational modifications and PK behavior. However, one major restriction to implementation of quality control strategies is the availability of techniques for obtaining on-line or at-line measurements of these attributes. In this work, we describe the development of an at-line assay to separate MAb charge variants in near real-time, which could ultimately be used to implement on-line quality control strategies for MAb production. The assay consists of a 2D-HPLC method with sequential in-line Protein A and WCX-10 HPLC column steps. To perform the 2D-HPLC assay at-line, the two columns steps were integrated into a single method using a novel system configuration that allowed parallel flow over column 1 or column 2 or sequential flow from column 1 to column 2. A bioreactor system was also developed such that media samples could be removed automatically from bioreactor vessels during production and delivered to the 2D-HPLC for analysis. With this at-line HPLC assay, we have demonstrated that MAb microheterogeneity occurs throughout the cell cycle whether the host cell line is grown under different or the same nominal culture conditions. PMID:24382831

  12. LINE: a code which simulates spectral line shapes for fusion reaction products generated by various speed distributions

    SciTech Connect

    Slaughter, D.

    1985-03-01

    A computer code is described which estimates the energy spectrum or ''line-shape'' for the charged particles and ..gamma..-rays produced by the fusion of low-z ions in a hot plasma. The simulation has several ''built-in'' ion velocity distributions characteristic of heated plasmas and it also accepts arbitrary speed and angular distributions although they must all be symmetric about the z-axis. An energy spectrum of one of the reaction products (ion, neutron, or ..gamma..-ray) is calculated at one angle with respect to the symmetry axis. The results are shown in tabular form, they are plotted graphically, and the moments of the spectrum to order ten are calculated both with respect to the origin and with respect to the mean.

  13. Multihormonal regulation of thyroglobulin production by the OVNIS 6H thyroid cell line.

    PubMed

    Aouani, A; Hovsépian, S; Fayet, G

    1988-02-01

    The hormonal regulation of thyroglobulin production has been studied using a clone of the ovine thyroid cell line: OVNIS 6H. 3 among the 6 hormones proposed for serum replacement are required for an optimal thyroglobulin production; insulin, hydrocortisone and thyrotropin. Insulin alone stimulates thyroglobulin production. The presence of insulin is also required to observe hydrocortisone and TSH stimulations. Newborn calf serum inhibits thyroglobulin production. The best conditions for optimal thyroglobulin expression and TSH responsiveness are obtained in serum-free medium supplemented with 5 micrograms/ml insulin, 100 nM hydrocortisone and 1 mU/ml TSH. PMID:3286455

  14. SBIR Grant:No-Vibration Agile Cryogenic Optical Refrigerator

    SciTech Connect

    Epstein, Richard

    2013-04-09

    Optical refrigeration is currently the only all-solid-state cryocooling technology that has been demonstrated. Optical cryocoolers are devices that use laser light to cool small crystal or glass cooling elements. The cooling element absorbs the laser light and reradiates it at higher energy, an example of anti-Stokes fluorescence. The dif-ference between the energy of the outgoing and incoming light comes from the thermal energy of the cooling element, which in turn becomes colder. Entitled No-Vibration Agile Cryocoolers using Optical Refrigeration, this Phase I proposal directly addressed the continued development of the optical refrigerator components necessary to transition this scientific breakthrough into National Nu-clear Security Administration (NNSA) sensor applications in line with the objectives of topic 50b. ThermoDynamic Films LLC (TDF), in collaboration with the University of New Mexico (UNM), cooled an optical-refrigerator cooling element comprised of an ytterbium-doped yttrium lithium fluoride (Yb:YLF) crystal from room tempera-ture to 123 K with about 2% efficiency. This is the world record in optical refrigera-tion and an important step toward revolutionizing cryogenic systems for sensor ap-plications. During this period, they also designed and analyzed the crucial elements of a prototype optical refrigerator including the thermal link that connects the cool-ing element with the load.

  15. GRB 070724B: the first Gamma Ray Burst localized by SuperAGILE

    SciTech Connect

    Del Monte, E.; Costa, E.; Donnarumma, I.; Feroci, M.; Lapshov, I.; Lazzarotto, F.; Soffitta, P.; Argan, A.; Pucella, G.; Trois, A.; Vittorini, V.; Evangelista, Y.; Rapisarda, M.; Barbiellini, G.; Longo, F.; Basset, M.; Foggetta, L.; Vallazza, E.; Bulgarelli, A.; Di Cocco, G.

    2008-05-22

    GRB070724B is the first Gamma Ray Burst localized by the SuperAGILE instrument aboard the AGILE space mission. The SuperAGILE localization has been confirmed after the after-glow observation by the XRT aboard the Swift satellite. No significant gamma ray emission above 50 MeV has been detected for this GRB. In this paper we describe the SuperAGILE capabilities in detecting Gamma Ray Burst and the AGILE observation of GRB 070724B.

  16. Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

    NASA Astrophysics Data System (ADS)

    Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

    Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

  17. 40 CFR 1042.305 - Preparing and testing production-line engines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of hours you operated your emission-data engine for certifying the engine family (see 40 CFR part... Category 1 and Category 2 engines, but you need not do additional testing to show that production-line...) You document the need for doing so in your procedures for assembling and inspecting all...

  18. 40 CFR 1045.310 - How must I select engines for production-line testing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How must I select engines for production-line testing? 1045.310 Section 1045.310 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES...

  19. 40 CFR 1048.310 - How must I select engines for production-line testing?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How must I select engines for production-line testing? 1048.310 Section 1048.310 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION...

  20. 40 CFR 1048.301 - When must I test my production-line engines?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... nonconformity, we may require you to test production-line engines under this subpart, or under 40 CFR part 1068... meet the field-testing requirements of 40 CFR part 1065, subpart J, but not the otherwise applicable requirements in 40 CFR part 1065 for laboratory testing, to demonstrate compliance with duty-cycle...

  1. 78 FR 34640 - Certain Lined Paper Products From the People's Republic of China: Preliminary Results and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-10

    ... Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006) (``CLPP Order''). \\2\\ Id... Antidumping Proceedings: Assessment of Antidumping Duties, 76 FR 65694 (October 24, 2011) and the ``Assessment... Review, 71 FR 26,455, 26,457 (May 5, 2006) (unchanged in Certain Steel Concrete Reinforcing Bars...

  2. 40 CFR 1048.301 - When must I test my production-line engines?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... nonconformity, we may require you to test production-line engines under this subpart, or under 40 CFR part 1068... meet the field-testing requirements of 40 CFR part 1065, subpart J, but not the otherwise applicable requirements in 40 CFR part 1065 for laboratory testing, to demonstrate compliance with duty-cycle...

  3. 40 CFR 1051.301 - When must I test my production-line vehicles or engines?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... nonconformity, we may require you to test production-line engines under this subpart, or under 40 CFR part 1068... may use analyzers and sampling systems that meet the field-testing requirements of 40 CFR part 1065, subpart J, but not the otherwise applicable requirements in 40 CFR part 1065 for laboratory testing,...

  4. 40 CFR 1051.301 - When must I test my production-line vehicles or engines?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... nonconformity, we may require you to test production-line engines under this subpart, or under 40 CFR part 1068... may use analyzers and sampling systems that meet the field-testing requirements of 40 CFR part 1065, subpart J, but not the otherwise applicable requirements in 40 CFR part 1065 for laboratory testing,...

  5. 78 FR 22845 - Certain Lined Paper Products From India: Final Results of Countervailing Duty Administrative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-17

    .... Export Oriented Units Duty-Free Import of Capital Goods and Raw Materials 5. Market Development... Administrative Review; Calendar Year 2010, 77 FR 61742 (October 11, 2012) (Preliminary Results). \\2\\ See Issues... Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September...

  6. 77 FR 61381 - Certain Lined Paper Products From India: Antidumping Duty Administrative Review; 2010-2011

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-09

    ...: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006). Notification to..., Indonesia and the People's Republic of China, 71 FR 56949 (September 28, 2006), remains dispositive... Margin and Assessment Rate in Certain Antidumping Proceedings: Final Modification, 77 FR 8101...

  7. 78 FR 22232 - Certain Lined Paper Products From India: Final Results of Antidumping Duty Administrative Review...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949... Duty Administrative Review; 2010-2011, 77 FR 61381 (October 9, 2012) (Preliminary Results), and... Reviews and Request for Revocation in Part, 76 FR 67133 (October 31, 2011) (Initiation Notice). For...

  8. 75 FR 64988 - Certain Lined Paper Products From India: Notice of Preliminary Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-21

    ...The Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on certain lined paper products (CLPP) from India. For the period September 1, 2008, through August 31, 2009, we have preliminarily determined that Navneet Publications (India) Limited (Navneet) did not make sales of subject merchandise at less than normal value (NV) (i.e., sales......

  9. CONSTRAINING JET PRODUCTION SCENARIOS BY STUDIES OF NARROW-LINE RADIO GALAXIES

    SciTech Connect

    Sikora, Marek; Stasinska, Grazyna; Koziel-Wierzbowska, Dorota; Madejski, Greg M.; Asari, Natalia V.

    2013-03-01

    We study a large sample of narrow-line radio galaxies (NLRGs) with extended radio structures. Using 1.4 GHz radio luminosities L {sub 1.4}, narrow optical emission line luminosities L {sub [OIII]} and L{sub H{sub {alpha}}}, as well as black hole masses M {sub BH} derived from stellar velocity dispersions measured from the optical spectra obtained with the Sloan Digital Sky Survey, we find that (1) NLRGs cover about four decades of the Eddington ratio, {lambda} {identical_to} L {sub bol}/L {sub Edd}{proportional_to}L {sub line}/M {sub BH}; (2) L {sub 1.4}/M {sub BH} strongly correlates with {lambda}; and (3) radio loudness, R{identical_to}L{sub 1.4}/L{sub line}, strongly anti-correlates with {lambda}. A very broad range of the Eddington ratio indicates that the parent population of NLRGs includes both radio-loud quasars (RLQs) and broad-line radio galaxies (BLRGs). The correlations they obey and their high jet production efficiencies favor a jet production model which involves the so-called magnetically choked accretion scenario. In this model, production of the jet is dominated by the Blandford-Znajek mechanism, and the magnetic fields in the vicinity of the central black hole are confined by the ram pressure of the accretion flow. Since large net magnetic flux accumulated in central regions of the accretion flow required by the model can take place only via geometrically thick accretion, we speculate that the massive, 'cold' accretion events associated with luminous emission-line active galactic nucleus can be accompanied by an efficient jet production only if preceded by a hot, very sub-Eddington accretion phase.

  10. Modern Enterprise Systems as Enablers of Agile Development

    NASA Astrophysics Data System (ADS)

    Fredriksson, Odd; Ljung, Lennart

    Traditional ES technology and traditional project management methods are supporting and matching each other. But they are not supporting the critical success conditions for ES development in an effective way. Although the findings from one case study of a successful modern ES change project is not strong empirical evidence, we carefully propose that the new modern ES technology is supporting and matching agile project management methods. In other words, it provides the required flexibility which makes it possible to put into practice the agile way of running projects, both for the system supplier and for the customer. In addition, we propose that the combination of modern ES technology and agile project management methods are more appropriate for supporting the realization of critical success conditions for ES development. The main purpose of this chapter is to compare critical success conditions for modern enterprise systems development projects with critical success conditions for agile information systems development projects.

  11. Frequency agile OPO-based transmitters for multiwavelength DIAL

    SciTech Connect

    Velsko, S.P.; Ruggiero, A.; Herman, M.

    1996-09-01

    We describe a first generation mid-infrared transmitter with pulse to pulse frequency agility and both wide and narrow band capability. This transmitter was used to make multicomponent Differential Absorption LIDAR (DIAL) measurements in the field.

  12. Investigation into the impact of agility on conceptual fighter design

    NASA Technical Reports Server (NTRS)

    Engelbeck, R. M.

    1995-01-01

    The Agility Design Study was performed by the Boeing Defense and Space Group for the NASA Langley Research Center. The objective of the study was to assess the impact of agility requirements on new fighter configurations. Global trade issues investigated were the level of agility, the mission role of the aircraft (air-to-ground, multi-role, or air-to-air), and whether the customer is Air force, Navy, or joint service. Mission profiles and design objectives were supplied by NASA. An extensive technology assessment was conducted to establish the available technologies to industry for the aircraft. Conceptual level methodology is presented to assess the five NASA-supplied agility metrics. Twelve configurations were developed to address the global trade issues. Three-view drawings, inboard profiles, and performance estimates were made and are included in the report. A critical assessment and lessons learned from the study are also presented.

  13. The relationship between mTOR signalling pathway and recombinant antibody productivity in CHO cell lines

    PubMed Central

    2014-01-01

    Background High recombinant protein productivity in mammalian cell lines is often associated with phenotypic changes in protein content, energy metabolism, and cell growth, but the key determinants that regulate productivity are still not clearly understood. The mammalian target of rapamycin (mTOR) signalling pathway has emerged as a central regulator for many cellular processes including cell growth, apoptosis, metabolism, and protein synthesis. This role of this pathway changes in response to diverse environmental cues and allows the upstream proteins that respond directly to extracellular signals (such as nutrient availability, energy status, and physical stresses) to communicate with downstream effectors which, in turn, regulate various essential cellular processes. Results In this study, we have performed a transcriptomic analysis using a pathway-focused polymerase chain reaction (PCR) array to compare the expression of 84 target genes related to the mTOR signalling in two recombinant CHO cell lines with a 17.4-fold difference in specific monoclonal antibody productivity (q p ). Eight differentially expressed genes that exhibited more than a 1.5-fold change were identified. Pik3cd (encoding the Class 1A catalytic subunit of phosphatidylinositol 3-kinase [PI3K]) was the most differentially expressed gene having a 71.3-fold higher level of expression in the high producer cell line than in the low producer. The difference in the gene’s transcription levels was confirmed at the protein level by examining expression of p110δ. Conclusion Expression of p110δ correlated with specific productivity (q p ) across six different CHO cell lines, with a range of expression levels from 3 to 51 pg/cell/day, suggesting that p110δ may be a key factor in regulating productivity in recombinant cell lines. PMID:24533650

  14. Agile data management for curation of genomes to watershed datasets

    NASA Astrophysics Data System (ADS)

    Varadharajan, C.; Agarwal, D.; Faybishenko, B.; Versteeg, R.

    2015-12-01

    A software platform is being developed for data management and assimilation [DMA] as part of the U.S. Department of Energy's Genomes to Watershed Sustainable Systems Science Focus Area 2.0. The DMA components and capabilities are driven by the project science priorities and the development is based on agile development techniques. The goal of the DMA software platform is to enable users to integrate and synthesize diverse and disparate field, laboratory, and simulation datasets, including geological, geochemical, geophysical, microbiological, hydrological, and meteorological data across a range of spatial and temporal scales. The DMA objectives are (a) developing an integrated interface to the datasets, (b) storing field monitoring data, laboratory analytical results of water and sediments samples collected into a database, (c) providing automated QA/QC analysis of data and (d) working with data providers to modify high-priority field and laboratory data collection and reporting procedures as needed. The first three objectives are driven by user needs, while the last objective is driven by data management needs. The project needs and priorities are reassessed regularly with the users. After each user session we identify development priorities to match the identified user priorities. For instance, data QA/QC and collection activities have focused on the data and products needed for on-going scientific analyses (e.g. water level and geochemistry). We have also developed, tested and released a broker and portal that integrates diverse datasets from two different databases used for curation of project data. The development of the user interface was based on a user-centered design process involving several user interviews and constant interaction with data providers. The initial version focuses on the most requested feature - i.e. finding the data needed for analyses through an intuitive interface. Once the data is found, the user can immediately plot and download data

  15. Relationship between in-line viscosity and Bostwick measurement during ketchup production.

    PubMed

    McCarthy, Kathryn L; McCarthy, Michael J

    2009-08-01

    The Bostwick consistometer remains an integral part of assessing the consistency of tomato products in the factory. This work addresses the blending of tomato pastes, packed at different Bostwick readings, for use in tomato ketchup production. The objective of this study was to correlate in-line viscosity measurements of 12 degrees Bx tomato concentrates to final product quality. Five blends of tomato concentrate were prepared by blending 2 pastes and diluting the mixture to a soluble solids level of 12 degrees Bx. In-line viscometry measurements at process temperature were made using magnetic resonance viscometry. The resulting Herschel-Bulkley parameters were used to evaluate an apparent viscosity at a characteristic shear rate. The apparent viscosity and Bostwick measurement for the blends were correlated based on a gravity current flow analysis, yielding a coefficient of determination of over 0.99. Ketchup was made from the tomato concentrate blends at 3 levels of natural tomato soluble solids (NTSS). The ketchup Bostwick measurement was then correlated to the ratio of (eta/rho)(-1/5) of the 12 degrees Bx tomato concentrate yielding coefficients of determination of 0.97, 0.97, and 0.91 for NTSS levels of 6%, 7%, and 7.8%, respectively. This study demonstrates that final product quality can be predicted from in-line viscosity measurements of an intermediate product. PMID:19723191

  16. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  17. Production of higher quality bio-oils by in-line esterification of pyrolysis vapor

    DOEpatents

    Hilten, Roger Norris; Das, Keshav; Kastner, James R; Bibens, Brian P

    2014-12-02

    The disclosure encompasses in-line reactive condensation processes via vapor phase esterification of bio-oil to decease reactive species concentration and water content in the oily phase of a two-phase oil, thereby increasing storage stability and heating value. Esterification of the bio-oil vapor occurs via the vapor phase contact and subsequent reaction of organic acids with ethanol during condensation results in the production of water and esters. The pyrolysis oil product can have an increased ester content and an increased stability when compared to a condensed pyrolysis oil product not treated with an atomized alcohol.

  18. Terrestrial Gamma-Ray Flashes at the highest energies as detected by AGILE

    NASA Astrophysics Data System (ADS)

    Tavani, M.; Marisaldi, M.; Fuschino, F.; Labanti, C.; Argan, A.; Agile Team

    2011-12-01

    The AGILE satellite, operating since mid-2007, is ideal for the study of Terrestrial Gamma-Ray Flashes (TGFs) at the highest energies. AGILE has been detecting TGFs with both its Calorimeter and with its imaging gamma-ray Tracker. The on-board trigger logic has a broad dynamic range (reaching sub-millisecond trigger timescales) and a detection capability in the range 0.3 - 100 MeV. Since the 2009-2010 discovery of a power-law spectral component surprisingly detected up to 100 MeV, AGILE has been collecting additional TGF data with a substantial improvement of the statistics. We will present the most recent results based on about 300 events, focusing on the properties of TGFs showing substantial emission above 40 MeV (High-Energy TGF, HE-TGFs). We will also present new results on the global and local correlation between the TGFs/HE-TGFs and the lightning activity in the equatorial region as obtained by LIS/OTD data. Theoretical implications of HE-TGFs on particle acceleration in thunderstorms will be discussed as well as the possible important impacts of HE-TGFs in the atmospheric environment. The atmosphere during severe thunderstorms becomes a most efficient particle accelerator on Earth, challenging current models of TGF production.

  19. The first AGILE low-energy (< 30 MeV) Terrestrial Gamma-ray Flashes catalog

    NASA Astrophysics Data System (ADS)

    Marisaldi, Martino; Fuschino, Fabio; Pittori, Carlotta; Verrecchia, Francesco; Giommi, Paolo; Tavani, Marco; Dietrich, Stefano; Price, Colin; Argan, Andrea; Labanti, Claudio; Galli, Marcello; Longo, Francesco; Del Monte, Ettore; Barbiellini, Guido; Giuliani, Andrea; Bulgarelli, Andrea; Gianotti, Fulvio; Trifoglio, Massimo; Trois, Alessio

    2014-05-01

    We present the first catalog of Terrestrial Gamma-ray Flashes (TGFs) detected by the Minicalorimeter (MCAL) instrument on-board the AGILE satellite. The catalog includes 308 TGFs detected during the period March 2009 - July 2012 in the +/- 2.5° latitude band and selected to have the maximum photon energy up to 30 MeV. The characteristics of the AGILE events are analysed and compared to the observational framework established by the two other currently active missions capable of detecting TGFs from space, RHESSI and Fermi. A detailed model of the MCAL dead time is presented, which is fundamental to properly interpret our observations, particularly concerning duration, intensity and correlation with lightning sferics detected by the World Wide Lightning Location Network. The TGFs cumulative spectrum supports a low production altitude, in agreement with previous measurements. The AGILE TGF catalog below 30 MeV is publicly accessible online at the website of the ASI Science Data Center (ASDC) http://www.asdc.asi.it/mcaltgfcat/ In addition to the TGF sample properties we also present the catalog website functionalities available to users.

  20. Agile based "Semi-"Automated Data ingest process : ORNL DAAC example

    NASA Astrophysics Data System (ADS)

    Santhana Vannan, S. K.; Beaty, T.; Cook, R. B.; Devarakonda, R.; Hook, L.; Wei, Y.; Wright, D.

    2015-12-01

    The ORNL DAAC archives and publishes data and information relevant to biogeochemical, ecological, and environmental processes. The data archived at the ORNL DAAC must be well formatted, self-descriptive, and documented, as well as referenced in a peer-reviewed publication. The ORNL DAAC ingest team curates diverse data sets from multiple data providers simultaneously. To streamline the ingest process, the data set submission process at the ORNL DAAC has been recently updated to use an agile process and a semi-automated workflow system has been developed to provide a consistent data provider experience and to create a uniform data product. The goals of semi-automated agile ingest process are to: 1.Provide the ability to track a data set from acceptance to publication 2. Automate steps that can be automated to improve efficiencies and reduce redundancy 3.Update legacy ingest infrastructure 4.Provide a centralized system to manage the various aspects of ingest. This talk will cover the agile methodology, workflow, and tools developed through this system.

  1. Properties of terrestrial gamma ray flashes detected by AGILE MCAL below 30 MeV

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Fuschino, F.; Tavani, M.; Dietrich, S.; Price, C.; Galli, M.; Pittori, C.; Verrecchia, F.; Mereghetti, S.; Cattaneo, P. W.; Colafrancesco, S.; Argan, A.; Labanti, C.; Longo, F.; Del Monte, E.; Barbiellini, G.; Giuliani, A.; Bulgarelli, A.; Campana, R.; Chen, A.; Gianotti, F.; Giommi, P.; Lazzarotto, F.; Morselli, A.; Rapisarda, M.; Rappoldi, A.; Trifoglio, M.; Trois, A.; Vercellone, S.

    2014-02-01

    We present the characteristics of 308 terrestrial gamma ray flashes (TGFs) detected by the Minicalorimeter (MCAL) instrument on board the AGILE satellite during the period March 2009-July 2012 in the ±2.5° latitude band and selected to have the maximum photon energy up to 30 MeV. The characteristics of the AGILE events are analyzed and compared to the observational framework established by the two other currently active missions capable of detecting TGFs from space, RHESSI and Fermi. A detailed model of the MCAL dead time is presented, which is fundamental to properly interpret our observations. The most significant contribution to dead time is due to the anticoincidence shield in its current configuration and not to the MCAL detector itself. Longitude and local time distributions are compatible with previous observations, while the duration distribution is biased toward longer values because of dead time. The intensity distribution is compatible with previous observations, when dead time is taken into account. The TGFs cumulative spectrum supports a low production altitude, in agreement with previous measurements. We also compare our sample to lightning sferics detected by the World Wide Lightning Location Network and suggest a new method to assess quantitatively the consistency of two TGF populations based on the comparison of the associated lightning activity. According to this method, AGILE and RHESSI samples are compatible with the same parent population. The AGILE TGF catalog below 30 MeV is accessible online at the website of the ASI Science Data Center http://www.asdc.asi.it/mcaltgfcat/.

  2. Frequency-agile, rapid scanning spectroscopy

    NASA Astrophysics Data System (ADS)

    Truong, G.-W.; Douglass, K. O.; Maxwell, S. E.; van Zee, R. D.; Plusquellic, D. F.; Hodges, J. T.; Long, D. A.

    2013-07-01

    Challenging applications in trace gas measurements require low uncertainty and high acquisition rates. Many cavity-enhanced spectroscopies exhibit significant sensitivity and potential, but their scanning rates are limited by reliance on either mechanical or thermal frequency tuning. Here, we present frequency-agile, rapid scanning spectroscopy (FARS) in which a high-bandwidth electro-optic modulator steps a selected laser sideband to successive optical cavity modes. This approach involves no mechanical motion and allows for a scanning rate of 8 kHz per cavity mode, a rate that is limited only by the cavity response time itself. Unlike rapidly frequency-swept techniques, FARS does not reduce the measurement duty cycle, degrade the spectrum's frequency axis or require an unusual cavity configuration. FARS allows for a sensitivity of ~2 × 10-12 cm-1 Hz-1/2 and a tuning range exceeding 70 GHz. This technique shows promise for fast and sensitive trace gas measurements and studies of chemical kinetics.

  3. APID: Agile Protein Interaction DataAnalyzer.

    PubMed

    Prieto, Carlos; De Las Rivas, Javier

    2006-07-01

    Agile Protein Interaction DataAnalyzer (APID) is an interactive bioinformatics web tool developed to integrate and analyze in a unified and comparative platform main currently known information about protein-protein interactions demonstrated by specific small-scale or large-scale experimental methods. At present, the application includes information coming from five main source databases enclosing an unified sever to explore >35 000 different proteins and 111 000 different proven interactions. The web includes search tools to query and browse upon the data, allowing selection of the interaction pairs based in calculated parameters that weight and qualify the reliability of each given protein interaction. Such parameters are for the 'proteins': connectivity, cluster coefficient, Gene Ontology (GO) functional environment, GO environment enrichment; and for the 'interactions': number of methods, GO overlapping, iPfam domain-domain interaction. APID also includes a graphic interactive tool to visualize selected sub-networks and to navigate on them or along the whole interaction network. The application is available open access at http://bioinfow.dep.usal.es/apid/. PMID:16845013

  4. Distributed agile software development for the SKA

    NASA Astrophysics Data System (ADS)

    Wicenec, Andreas; Parsons, Rebecca; Kitaeff, Slava; Vinsen, Kevin; Wu, Chen; Nelson, Paul; Reed, David

    2012-09-01

    The SKA software will most probably be developed by many groups distributed across the globe and coming from dierent backgrounds, like industries and research institutions. The SKA software subsystems will have to cover a very wide range of dierent areas, but still they have to react and work together like a single system to achieve the scientic goals and satisfy the challenging data ow requirements. Designing and developing such a system in a distributed fashion requires proper tools and the setup of an environment to allow for ecient detection and tracking of interface and integration issues in particular in a timely way. Agile development can provide much faster feedback mechanisms and also much tighter collaboration between the customer (scientist) and the developer. Continuous integration and continuous deployment on the other hand can provide much faster feedback of integration issues from the system level to the subsystem developers. This paper describes the results obtained from trialing a potential SKA development environment based on existing science software development processes like ALMA, the expected distribution of the groups potentially involved in the SKA development and experience gained in the development of large scale commercial software projects.

  5. Parallel optimization methods for agile manufacturing

    SciTech Connect

    Meza, J.C.; Moen, C.D.; Plantenga, T.D.; Spence, P.A.; Tong, C.H.; Hendrickson, B.A.; Leland, R.W.; Reese, G.M.

    1997-08-01

    The rapid and optimal design of new goods is essential for meeting national objectives in advanced manufacturing. Currently almost all manufacturing procedures involve the determination of some optimal design parameters. This process is iterative in nature and because it is usually done manually it can be expensive and time consuming. This report describes the results of an LDRD, the goal of which was to develop optimization algorithms and software tools that will enable automated design thereby allowing for agile manufacturing. Although the design processes vary across industries, many of the mathematical characteristics of the problems are the same, including large-scale, noisy, and non-differentiable functions with nonlinear constraints. This report describes the development of a common set of optimization tools using object-oriented programming techniques that can be applied to these types of problems. The authors give examples of several applications that are representative of design problems including an inverse scattering problem, a vibration isolation problem, a system identification problem for the correlation of finite element models with test data and the control of a chemical vapor deposition reactor furnace. Because the function evaluations are computationally expensive, they emphasize algorithms that can be adapted to parallel computers.

  6. Frequency-agile dual-comb spectroscopy

    NASA Astrophysics Data System (ADS)

    Millot, Guy; Pitois, Stéphane; Yan, Ming; Hovhannisyan, Tatevik; Bendahmane, Abdelkrim; Hänsch, Theodor W.; Picqué, Nathalie

    2016-01-01

    Spectroscopic gas sensing and its applications to, for example, trace detection or chemical kinetics, require ever more demanding measurement times, acquisition rates, sensitivities, precisions and broad tuning ranges. Here, we propose a new approach to near-infrared molecular spectroscopy, utilizing advanced concepts of optical telecommunications and supercontinuum photonics. We generate, without mode-locked lasers, two frequency combs of slightly different repetition frequencies and moderate, but rapidly tunable, spectral span. The output of a frequency-agile continuous-wave laser is split and sent into two electro-optic intensity modulators. Flat-top low-noise frequency combs are produced by wave-breaking in a nonlinear optical fibre of normal dispersion. With a dual-comb spectrometer, we record Doppler-limited spectra spanning 60 GHz within 13 μs and an 80 kHz refresh rate, at a tuning speed of 10 nm s-1. The sensitivity for weak absorption is enhanced by a long gas-filled hollow-core fibre. New opportunities for real-time diagnostics may be opened up, even outside the laboratory.

  7. Productivity and fishing pressure drive variability in fish parasite assemblages of the Line Islands, equatorial Pacific.

    PubMed

    Wood, Chelsea L; Baum, Julia K; Reddy, Sheila M W; Trebilco, Rowan; Sandin, Stuart A; Zgliczynski, Brian J; Briggs, Amy A; Micheli, Fiorenza

    2015-05-01

    Variability in primary productivity and fishing pressure can shape the abundance, species composition, and diversity of marine life. Though parasites comprise nearly half of marine species, their responses to these important forces remain little explored. We quantified parasite assemblages at two spatial scales, across a gradient in productivity and fishing pressure that spans six coral islands of the Line Islands archipelago and within the largest Line Island, Kiritimati, which experiences a west-to-east gradient in fishing pressure and upwelling-driven productivity. In the across-islands data set, we found that increasing productivity was correlated with increased parasite abundance overall, but that the effects of productivity differed among parasite groups. Trophically transmitted parasites increased in abundance with increasing productivity, but directly transmitted parasites did not exhibit significant changes. This probably arises because productivity has stronger effects on the abundance of the planktonic crustaceans and herbivorous snails that serve as the intermediate hosts of trophically transmitted parasites than on the higher-trophic level fishes that are the sole hosts of directly transmitted parasites. We also found that specialist parasites increased in response to increasing productivity, while generalists did not, possibly because specialist parasites tend to be more strongly limited by host availability than are generalist parasites. After the effect of productivity was controlled for, fishing was correlated with decreases in the abundance of trophically transmitted parasites, while directly transmitted parasites appeared to track host density; we observed increases in the abundance of parasites using hosts that experienced fishing-driven compensatory increases in abundance. The within-island data set confirmed these patterns for the combined effects of productivity and fishing on parasite abundance, suggesting that our conclusions are robust

  8. Semen production and fertility issues related to differences in genetic lines of boars.

    PubMed

    Sonderman, J P; Luebbe, J J

    2008-11-01

    Boars have been reported to differ in various characteristics important to productivity of AI units. These aspects include sensitivity to seasonal infertility, ejaculate volume x age interactions, optimum collection frequency, discard (trash) rate of ejaculates, age of puberty, libido and trainability, and semen shelf life. In addition to differences among individual boars, there were also identifiable differences among breeds, between purebreds and crossbreds, and between lines. The percentage of ejaculates discarded varied among seasons and among breeds within season, with maternal purebred lines being the most sensitive to warmer temperatures. These same lines were also slower to mature and produced fewer sperm per ejaculate. Breeds differed in the sustainability of motility in stored extended semen, and in farrowing rates. Boar centers need to factor breed differences into their decision-making processes to ensure adequate boar power and customer satisfaction. PMID:18783820

  9. Design study on the beam line for radioisotope production at KOMAC

    NASA Astrophysics Data System (ADS)

    Kwon, Hyeok-Jung

    2015-10-01

    A beam line for radioisotope (RI) production was designed for the 100-MeV proton linear accelerator at Korea Multi-purpose Accelerator Complex (KOMAC). The specifications of the beam line are such that the energy is 100 MeV and the average current is 0.6 mA for a target size of 100 mm in diameter. The system consists of a beam transport system including a magnet, a vacuum system, beam diagnostics, power supplies and a control system. The key components of the system are the high-field 45 bending magnet, the beam scanning system and beam window. In this paper, the design of the beam line and its key components are presented.

  10. Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line.

    PubMed

    Liu, Jinping; Tang, Zhaohui; Zhang, Jin; Chen, Qing; Xu, Pengfei; Liu, Wenzhong

    2016-01-01

    Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel-least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify) automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method. PMID:26986726

  11. Visual Perception-Based Statistical Modeling of Complex Grain Image for Product Quality Monitoring and Supervision on Assembly Production Line

    PubMed Central

    Chen, Qing; Xu, Pengfei; Liu, Wenzhong

    2016-01-01

    Computer vision as a fast, low-cost, noncontact, and online monitoring technology has been an important tool to inspect product quality, particularly on a large-scale assembly production line. However, the current industrial vision system is far from satisfactory in the intelligent perception of complex grain images, comprising a large number of local homogeneous fragmentations or patches without distinct foreground and background. We attempt to solve this problem based on the statistical modeling of spatial structures of grain images. We present a physical explanation in advance to indicate that the spatial structures of the complex grain images are subject to a representative Weibull distribution according to the theory of sequential fragmentation, which is well known in the continued comminution of ore grinding. To delineate the spatial structure of the grain image, we present a method of multiscale and omnidirectional Gaussian derivative filtering. Then, a product quality classifier based on sparse multikernel–least squares support vector machine is proposed to solve the low-confidence classification problem of imbalanced data distribution. The proposed method is applied on the assembly line of a food-processing enterprise to classify (or identify) automatically the production quality of rice. The experiments on the real application case, compared with the commonly used methods, illustrate the validity of our method. PMID:26986726

  12. a Photon Tag Calibration Beam for the Agile Satellite

    NASA Astrophysics Data System (ADS)

    Hasan, S.; Prest, M.; Foggetta, L.; Pontoni, C.; Mozzanica, A.; Barbiellini, G.; Basset, M.; Liello, F.; Longo, F.; Vallazza, E.; Buonomo, G.; Mazzitelli, G.; Quintieri, L.; Valente, P.; Boffelli, F.; Cattaneo, P.; Mauri, F.

    2006-04-01

    The AGILE satellite will be launched in 2006 for the study of gamma rays in the energy range 30 MeV-50 GeV. The satellite has to be calibrated using gamma rays of known energy. The calibration facility is being developed at the Beam Test Facility (BTF) at the INFN Laboratories in Frascati. The photons are produced by bremsstrahlung of electrons with a maximum momentum of 750 MeV/c. The electrons are tagged using a dipole magnet whose internal walls are covered by microstrip silicon detectors: depending on the energy loss, they impinge on a different strip once the dipole current has been set to a given value. The correlation between the direction of the electron measured by a pair of x-y silicon chambers and the impinging position on the tagging module inside the magnet allows the tagging of the photon. The paper describes the calibration layout and tests and the results, compared with the Montecarlo simulation, in terms of production rate and energy resolution.

  13. Function-based integration strategy for an agile manufacturing testbed

    NASA Astrophysics Data System (ADS)

    Park, Hisup

    1997-01-01

    This paper describes an integration strategy for plug-and- play software based on functional descriptions of the software modules. The functional descriptions identify explicitly the role of each module with respect to the overall systems. They define the critical dependencies that affect the individual modules and thus affect the behavior of the system. The specified roles, dependencies and behavioral constraints are then incorporated in a group of shared objects that are distributed over a network. These objects may be interchanged with others without disrupting the system so long as the replacements meet the interface and functional requirements. In this paper, we propose a framework for modeling the behavior of plug-and-play software modules that will be used to (1) design and predict the outcome of the integration, (2) generate the interface and functional requirements of individual modules, and (3) form a dynamic foundation for applying interchangeable software modules. I describe this strategy in the context of the development of an agile manufacturing testbed. The testbed represents a collection of production cells for machining operations, supported by a network of software modules or agents for planning, fabrication, and inspection. A process definition layer holds the functional description of the software modules. A network of distributed objects interact with one another over the Internet and comprise the plug-compatible software nodes that execute these functions. This paper will explore the technical and operational ramifications of using the functional description framework to organize and coordinate the distributed object modules.

  14. Molecular breeding of tomato lines for mass production of miraculin in a plant factory.

    PubMed

    Kato, Kazuhisa; Yoshida, Riichiro; Kikuzaki, Ayako; Hirai, Tadayoshi; Kuroda, Hirofumi; Hiwasa-Tanase, Kyoko; Takane, Kenichi; Ezura, Hiroshi; Mizoguchi, Tsuyoshi

    2010-09-01

    A transgenic tomato line (56B, "Moneymaker") that expresses the miraculin gene driven by the CaMV 35S promoter was crossed with a dwarf tomato ("Micro-Tom") for the molecular breeding of cultivars that are suitable for miraculin production in a closed cultivation system. Plant size, miraculin accumulation, and self-pruning growth were used as selection indicators for F2 plants. Two lines were chosen for further analysis, bred to the F6 or F7 generation and cultivated in a closed cultivation system. In 56B and the two crossed lines, the concentrations of miraculin in the pericarp were 140, 367, and 343 microg/g FW, respectively. We also estimated that 26.2, 73.6, and 45.9 kg FW/m2 of tomatoes and 2.2, 16.6, and 9.8 mg/m2 of miraculin in the pericarp, respectively, could be harvested per year. These two crossed lines will be useful for the mass production of miraculin, especially in a closed cultivation system. PMID:20695489

  15. Inspection logistics planning for multi-stage production systems with applications to semiconductor fabrication lines

    NASA Astrophysics Data System (ADS)

    Chen, Kyle Dakai

    Since the market for semiconductor products has become more lucrative and competitive, research into improving yields for semiconductor fabrication lines has lately received a tremendous amount of attention. One of the most critical tasks in achieving such yield improvements is to plan the in-line inspection sampling efficiently so that any potential yield problems can be detected early and eliminated quickly. We formulate a multi-stage inspection planning model based on configurations in actual semiconductor fabrication lines, specifically taking into account both the capacity constraint and the congestion effects at the inspection station. We propose a new mixed First-Come-First-Serve (FCFS) and Last-Come-First-Serve (LCFS) discipline for serving the inspection samples to expedite the detection of potential yield problems. Employing this mixed FCFS and LCFS discipline, we derive approximate expressions for the queueing delays in yield problem detection time and develop near-optimal algorithms to obtain the inspection logistics planning policies. We also investigate the queueing performance with this mixed type of service discipline under different assumptions and configurations. In addition, we conduct numerical tests and generate managerial insights based on input data from actual semiconductor fabrication lines. To the best of our knowledge, this research is novel in developing, for the first time in the literature, near-optimal results for inspection logistics planning in multi-stage production systems with congestion effects explicitly considered.

  16. X-ray and gamma-ray line production by nonthermal ions

    NASA Technical Reports Server (NTRS)

    Bussard, R. W.; Omidvar, K.; Ramaty, R.

    1977-01-01

    X-ray production was calculated at approximately 6.8 keV by the 2p to 1s transition in fast hydrogen- and helium-like iron ions, following both electron capture to excited levels and collisional excitation. A refinement of the OBK approximation was used to obtain an improved charge exchange cross section. This, and the corresponding ionization cross section were used to determine equilibrium charge fractions for iron ions as functions of their energy. The effective X-ray line production cross section was found to be sharply peaked in energy at about 8 to 12 MeV/amu. Because fast ions of similar energies can also excite nuclear levels, the ratio of selected strong gamma ray line emissivities to the X-ray line emissivity was also calculated. Limits set by this method on the intensity of gamma ray line emission from the galactic center and the radio galaxy Centaurus A are generally lower than those reported in the literature.

  17. The AGILE Alert System for Gamma-Ray Transients

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Parmiggiani, N.; Fioretti, V.; Chen, A. W.; Vercellone, S.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Beneventano, D.; Argan, A.; Trois, A.; Scalise, E.; Longo, F.; Pellizzoni, A.; Pucella, G.; Colafrancesco, S.; Conforti, V.; Tempesta, P.; Cerone, M.; Sabatini, P.; Annoni, G.; Valentini, G.; Salotti, L.

    2014-01-01

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  18. The agile alert system for gamma-ray transients

    SciTech Connect

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Fioretti, V.; Chen, A. W.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Santolamazza, P.; Fanari, G.; Giommi, P.; Pellizzoni, A.; and others

    2014-01-20

    In recent years, a new generation of space missions has offered great opportunities for discovery in high-energy astrophysics. In this article we focus on the scientific operations of the Gamma-Ray Imaging Detector (GRID) on board the AGILE space mission. AGILE-GRID, sensitive in the energy range of 30 MeV-30 GeV, has detected many γ-ray transients of both galactic and extragalactic origin. This work presents the AGILE innovative approach to fast γ-ray transient detection, which is a challenging task and a crucial part of the AGILE scientific program. The goals are to describe (1) the AGILE Gamma-Ray Alert System, (2) a new algorithm for blind search identification of transients within a short processing time, (3) the AGILE procedure for γ-ray transient alert management, and (4) the likelihood of ratio tests that are necessary to evaluate the post-trial statistical significance of the results. Special algorithms and an optimized sequence of tasks are necessary to reach our goal. Data are automatically analyzed at every orbital downlink by an alert pipeline operating on different timescales. As proper flux thresholds are exceeded, alerts are automatically generated and sent as SMS messages to cellular telephones, via e-mail, and via push notifications from an application for smartphones and tablets. These alerts are crosschecked with the results of two pipelines, and a manual analysis is performed. Being a small scientific-class mission, AGILE is characterized by optimization of both scientific analysis and ground-segment resources. The system is capable of generating alerts within two to three hours of a data downlink, an unprecedented reaction time in γ-ray astrophysics.

  19. Climate Services for Adaptation Support: Sectors, Regions, and Product Lines (Invited)

    NASA Astrophysics Data System (ADS)

    Owen, T.; Shea, E. E.

    2009-12-01

    Environmental information for decision support must be user-focused, accurate, and actionable. As the deleterious impacts of a non-stationary climate system manifest themselves through loss of civil infrastructure, cultural, and natural resources, NOAA and other science agencies are restructuring their approach to decision support, moving from a climate perspectives-centric model to one that offers more nimble, granular, and timely product lines supporting a breadth of sectoral- and regionally-focused decisions. This talk outlines NOAA’s efforts to this end, including its framing of sectors and regions, its development of emerging product lines, and its reliance on technological advances to better disseminate information. Through its climate services efforts, NOAA’s climate data resources can be leveraged to support sound adaptation decision making for societal infrastructure development and in the stewardship of marine, ocean, coastal, and terrestrial natural resources.

  20. Analysis of global Terrestrial Gamma Ray Flashes distribution and special focus on AGILE detections over South America

    NASA Astrophysics Data System (ADS)

    Fabró, Ferran; Montanyà, Joan; Marisaldi, Martino; van der Velde, Oscar A.; Fuschino, Fabio

    2015-03-01

    Global distribution of the Terrestrial Gamma-ray Flashes (TGFs) detected by AGILE and RHESSI for the period from March 2009 to July 2012 has been analysed. A fourth TGF production region has been distinguished over the Pacific. It is confirmed that TGF occurrence follows the Intertropical Convergence Zone (ITCZ) seasonal migration and prefers afternoons. TGF/lightning ratio appears to be lower over America than other regions suggesting that meteorological regional differences are important for the TGF production. Diurnal cycle of TGFs peaks in the afternoon suggesting that Convective Available Potential Energy (CAPE) and convection are important for TGF production. Moreover all AGILE passages over South America in the same period have been analysed to find meteorological preferences for TGF occurrence. In each passage the analysis of Cloud Top Altitude (CTA), CAPE, number of strokes, number of storms and coverage area of clouds with temperatures below -70 °C (Cloud Top Coverage area, CTC) are computed. On average, AGILE has been exposed to 19,100 strokes between each TGF representing ∼68 h of exposure over active storms. High CAPE values, high cloud tops and high stroke occurrence suggest that meteorological conditions conducive to vigorous and electrically active storms are important for TGF production. It is shown that a high number of thunderstorms is preferable for TGF production which may be explained by a greater chance of the presence of a thunderstorm in the best development stage for TGF production. High tropopause altitude seems to be important but not primordial for TGF production.

  1. A sensor skid for precise 3D modeling of production lines

    NASA Astrophysics Data System (ADS)

    Elseberg, J.; Borrmann, D.; Schauer, J.; Nüchter, A.; Koriath, D.; Rautenberg, U.

    2014-05-01

    Motivated by the increasing need of rapid characterization of environments in 3D, we designed and built a sensor skid that automates the work of an operator of terrestrial laser scanners. The system combines terrestrial laser scanning with kinematic laser scanning and uses a novel semi-rigid SLAMmethod. It enables us to digitize factory environments without the need to stop production. The acquired 3D point clouds are precise and suitable to detect objects that collide with items moved along the production line.

  2. Temperature-dependence of Threshold Current Density-Length Product in Metallization Lines: A Revisit

    NASA Astrophysics Data System (ADS)

    Saptono Duryat, Rahmat; Kim, Choong-Un

    2016-04-01

    One of the important phenomena in Electromigration (EM) is Blech Effect. The existence of Threshold Current Density-Length Product or EM Threshold has such fundamental and technological consequences in the design, manufacture, and testing of electronics. Temperature-dependence of Blech Product had been thermodynamically established and the real behavior of such interconnect materials have been extensively studied. The present paper reviewed the temperature-dependence of EM threshold in metallization lines of different materials and structure as found in relevant published articles. It is expected that the reader can see a big picture from the compiled data, which might be overlooked when it was examined in pieces.

  3. 78 FR 63162 - Certain Lined Paper Products From India: Notice of Partial Rescission and Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ...; and Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR... Review, 73 FR 49170 (August 20, 2008); see also, Certain Lined Paper Products from India: Notice of... Administrative Reviews and Request for Revocation in Part, 77 FR 65858 (October 31, 2012) (Initiation Notice)....

  4. 76 FR 28213 - Certain Lined Paper Products From the People's Republic of China: Notice of Court Decision Not in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-16

    ... Administrative Review of Certain Lined Paper Products from the People's Republic of China, 74 FR 68036 (December... Review, 74 FR 17160 (April 14, 2009) (``Final Results''). On December 22, 2009, the Department published... International Trade Administration Certain Lined Paper Products From the People's Republic of China: Notice...

  5. 76 FR 53116 - Certain Lined Paper Products From the People's Republic of China: Notice of Court Decision Not in...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-25

    ... Administrative Review of Certain Lined Paper Products From the People's Republic of China, 74 FR 68036 (December... Administrative Review, 74 FR 17160 (April 14, 2009) (``Final Results''). On December 22, 2009, the Department... International Trade Administration Certain Lined Paper Products From the People's Republic of China: Notice...

  6. Development of drying-induced stresses in pharmaceutical granules prepared in continuous production line.

    PubMed

    Mezhericher, Maksim

    2014-11-01

    The phenomenon of development of drying-induced stresses has been given a through consideration in the literature on drying of many products. At the same time, to the best of our knowledge, the open published sources contain no information on drying stresses in pharmaceutical granules prepared by continuous manufacturing methods. To study the appearance and evolution of drying-induced stresses in pharmaceutical granules during their production, in this work a theoretical model of drying of single wet pharmaceutical granule has been developed and successively validated by published experimental data obtained on ConsiGma™ continuous from-powder-to-tablet production line (GEA Pharma Systems). The results demonstrate that elevated temperatures of drying air result in faster drying process (which reduces the specific cost of the final product), but, on the other hand, quick drying leads to substantial drying-induced stresses which may damage the granule microstructure, resulting in cracking or even breakage of granules. The drying-induced stresses increase with drying temperature, porosity and size of dense non-hollow granules. The negative effects promoted by the drying-induced stresses should be taken into consideration when choosing operating conditions of continuous production lines including drying of pharmaceutical granules. PMID:25152956

  7. The Southern Argentine Agile Meteor Radar (SAAMER)

    NASA Astrophysics Data System (ADS)

    Janches, Diego

    2014-11-01

    The Southern Argentina Agile Meteor Radar (SAAMER) is a new generation system deployed in Rio Grande, Tierra del Fuego, Argentina (53 S) in May 2008. SAAMER transmits 10 times more power than regular meteor radars, and uses a newly developed transmitting array, which focuses power upward instead of the traditional single-antenna-all-sky configuration. The system is configured such that the transmitter array can also be utilized as a receiver. The new design greatly increases the sensitivity of the radar enabling the detection of large number of particles at low zenith angles. The more concentrated transmitted power enables additional meteor studies besides those typical of these systems based on the detection of specular reflections, such as routine detections of head echoes and non-specular trails, previously only possible with High Power and Large Aperture radars. In August 2010, SAAMER was upgraded to a system capable to determine meteoroid orbital parameters. This was achieved by adding two remote receiving stations approximately 10 km away from the main site in near perpendicular directions. The upgrade significantly expands the science that is achieved with this new radar enabling us to study the orbital properties of the interplanetary dust environment. Because of the unique geographical location, SAAMER allows for additional inter-hemispheric comparison with measurements from Canadian Meteor Orbit Radar, which is geographically conjugate. Initial surveys show, for example, that SAAMER observes a very strong contribution of the South Toroidal Sporadic meteor source, of which limited observational data is available. In addition, SAAMER offers similar unique capabilities for meteor showers and streams studies given the range of ecliptic latitudes that the system enables detailed study of showers at high southern latitudes (e.g July Phoenicids or Puppids complex). Finally, SAAMER is ideal for the deployment of complementary instrumentation in both, permanent

  8. Creativity in Agile Systems Development: A Literature Review

    NASA Astrophysics Data System (ADS)

    Conboy, Kieran; Wang, Xiaofeng; Fitzgerald, Brian

    Proponents of agile methods claim that enabling, fostering and driving creativity is the key motivation that differentiates agile methods from their more traditional, beauraucratic counterparts. However, there is very little rigorous research to support this claim. Like most of their predecessors, the development and promotion of these methods has been almost entirely driven by practitioners and consultants, with little objective validation from the research community. This lack of validation is particularly relevant for SMEs, given that many of their project teams typify the environment to which agile methods are most suited i.e. small, co-located teams with diverse, blended skills in unstructured, sometimes even chaotic surroundings. This paper uses creativity theory as a lens to review the current agile method literature to understand exactly how much we know about the extent to which creativity actually occurs in these agile environments. The study reveals many gaps and conflict of opinion in the body of knowledge in its current state and identifies many avenues for further research.

  9. Algal productivity and nitrate assimilation in an effluent dominated concrete lined stream

    USGS Publications Warehouse

    Kent, R.; Belitz, K.; Burton, C.A.

    2005-01-01

    This study examined algal productivity and nitrate assimilation in a 2.85 km reach of Cucamonga Creek, California, a concrete lined channel receiving treated municipal wastewater. Stream nitrate concentrations observed at two stations indicated nearly continuous loss throughout the diel study. Nitrate loss in the reach was approximately 11 mg/L/d or 1.0 g/m2/d as N, most of which occurred during daylight. The peak rate of nitrate loss (1.13 mg/l/hr) occurred just prior to an afternoon total CO2 depletion. Gross primary productivity, as estimated by a model using the observed differences in dissolved oxygen between the two stations, was 228 mg/L/d, or 21 g/m2/d as O2. The observed diel variations in productivity, nitrate loss, pH, dissolved oxygen, and CO2 indicate that nitrate loss was primarily due to algal assimilation. The observed levels of productivity and nitrate assimilation were exceptionally high on a mass per volume basis compared to studies on other streams; these rates occurred because of the shallow stream depth. This study suggests that concrete-lined channels can provide an important environmental service: lowering of nitrate concentrations similar to rates observed in biological treatment systems.

  10. Using the Deming quality improvement method to manage medical record department product lines.

    PubMed

    Postal, S N

    1990-06-01

    The above application of the quality improvement cycle provides insight into the use of the Deming method to address one of several identified customer needs and expectations obtained during the managing phase of product-line administration. Implementation of the quality improvement method requires a major commitment from all team members. Process improvement requires a willingness to be detail oriented. Gathering of statistics--such as analysis turn-around time--and evaluation are critical. This objective view of processes requires accountability and a commitment to change. Improvements focus on long-term problem resolution, not the quick fixes that result from addressing symptoms of problems. True problem resolution occurs by solving the root causes of variations. Medical record departments must move from being outcome oriented to being process focused. It is no longer feasible to be constantly putting out fires in an environment that demands well-planned and well-designed products that meet customers' expectations. The long-term management of product lines requires a systematic method of planning, doing, checking, and acting. The Deming quality improvement method provides a framework for positive change that focuses on quality processes resulting in a quality product that meets consumers' needs. PMID:10106656

  11. Production of drip-line nuclei at RIKEN RI Beam Factory

    NASA Astrophysics Data System (ADS)

    Saito, Atsumi

    2014-09-01

    Production cross-sections and secondary-beam yields of very neutron rich nuclei near neutron drip-line at 200--250 MeV/u have been investigated at RIKEN RI Beam Factory (RIBF). RIBF is the next generation RI beam facility, which can produce a variety of exotic nuclei with high intensity. The measurement of production yields of 19B, 22C, which are located on the neutron drip-line, and neighboring isotopes was made on the occasion of the Coulomb and nuclear breakup experiments of these halo nuclei at SAMURAI (Superconducting Analyzer for MUlti-particle from RAdioIsotope beams) facility at RIBF. We used 345 MeV/u 48Ca beam as primary beam, which impinged on 30 mm-thick Be target, to obtain secondary beams by projectile fragmentation. The projectile fragments were then separated through Superconducting RI beam separator BigRIPS, and were identified by measuring time of flight (TOF), energy loss (ΔE), and magnetic rigidity (Bρ) by the standard detectors at 2nd stage of BigRIPS. We thus obtained production cross-sections and yields of carbon and boron isotopes. The production cross-sections and yields extracted were compared with the simulation code LISE using EPAX. We discuss these results and comparisons in this poster presentation.

  12. More similar than different: Host cell protein production using three null CHO cell lines.

    PubMed

    Yuk, Inn H; Nishihara, Julie; Walker, Donald; Huang, Eric; Gunawan, Feny; Subramanian, Jayashree; Pynn, Abigail F J; Yu, X Christopher; Zhu-Shimoni, Judith; Vanderlaan, Martin; Krawitz, Denise C

    2015-10-01

    To understand the diversity in the cell culture harvest (i.e., feedstock) provided for downstream processing, we compared host cell protein (HCP) profiles using three Chinese Hamster Ovary (CHO) cell lines in null runs which did not generate any recombinant product. Despite differences in CHO lineage, upstream process, and culture performance, the cell lines yielded similar cell-specific productivities for immunogenic HCPs. To compare the dynamics of HCP production, we searched for correlations between the time-course profiles of HCP (as measured by multi-analyte ELISA) and those of two intracellular HCP species, phospholipase B-like 2 (PLBL2) and lactate dehydrogenase (LDH). Across the cell lines, proteins in the day 14 supernatants analyzed by two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) showed different spot patterns. However, subsequent analysis by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) indicated otherwise: the total number of peptides and proteins identified were comparable, and 80% of the top 1,000 proteins identified were common to all three lines. Finally, to assess the impact of culture viability on extracellular HCP profiles, we analyzed supernatants from a cell line whose viability dropped after day 10. The amounts of HCP and PLBL2 (quantified by their respective ELISAs) as well as the numbers and major populations of HCPs (identified by LC-MS/MS) were similar across days 10, 14, and 17, during which viabilities declined from ∼80% to <20% and extracellular LDH levels increased several-fold. Our findings indicate that the CHO-derived HCPs in the feedstock for downstream processing may not be as diverse across cell lines and upstream processes, or change as dramatically upon viability decline as originally expected. In addition, our findings show that high density CHO cultures (>10(7) cells/mL)-operated in fed-batch mode and exhibiting high viabilities (>70%) throughout the culture duration-can accumulate a

  13. Expression, localization, and regulation of NOS in human mast cell lines: effects on leukotriene production.

    PubMed

    Gilchrist, Mark; McCauley, Scott D; Befus, A Dean

    2004-07-15

    Nitric oxide (NO) is a potent radical produced by nitric oxide synthase (NOS) and has pleiotrophic activities in health and disease. As mast cells (MCs) play a central role in both homeostasis and pathology, we investigated NOS expression and NO production in human MC populations. Endothelial NOS (eNOS) was ubiquitously expressed in both human MC lines and skin-derived MCs, while neuronal NOS (nNOS) was variably expressed in the MC populations studied. The inducible (iNOS) isoform was not detected in human MCs. Both growth factor-independent (HMC-1) and -dependent (LAD 2) MC lines showed predominant nuclear eNOS protein localization, with weaker cytoplasmic expression. nNOS showed exclusive cytoplasmic localization in HMC-1. Activation with Ca(2+) ionophore (A23187) or IgE-anti-IgE induced eNOS phosphorylation and translocation to the nucleus and nuclear and cytoplasmic NO formation. eNOS colocalizes with the leukotriene (LT)-initiating enzyme 5-lipoxygenase (5-LO) in the MC nucleus. The NO donor, S-nitrosoglutathione (SNOG), inhibited, whereas the NOS inhibitor, N(G)-nitro-l-arginine methyl ester (L-NAME), potentiated LT release in a dose-dependent manner. Thus, human MC lines produce NO in both cytoplasmic and nuclear compartments, and endogenously produced NO can regulate LT production by MCs. PMID:15044250

  14. Stable and high-level production of recombinant Factor IX in human hepatic cell line.

    PubMed

    de Castilho Fernandes, Andrielle; Fontes, Aparecida; Gonsales, Nathalia; Swiech, Kamilla; Picanco-Castro, Virginia; Faca, Sandra; Covas, Dimas

    2011-01-01

    Hemophilia B is a genetic disease of the coagulation system that affects one in 30,000 males worldwide. Recombinant human Factor IX (rhFIX) has been used for hemophilia B treatment, but the amount of active protein generated by these systems is inefficient, resulting in a high-cost production of rhFIX. In this study, we developed an alternative for rhFIX production. We used a retrovirus system to obtain two recombinant cell lines. We first tested rhFIX production in the human embryonic kidney 293 cells (293). Next, we tested a hepatic cell line (HepG2) because FIX is primarily expressed in the liver. Our results reveal that intracellular rhFIX expression was more efficient in HepG2/rhFIX (46%) than in 293/rhFIX (21%). The activated partial thromboplastin time test showed that HepG2/rhFIX expressed biologically active rhFIX 1.5 times higher than 293/rhFIX (P = 0.016). Recovery of rhFIX from the HepG2 by reversed-phase chromatography was straightforward. We found that rhFIX has a pharmacokinetic profile similar to that of FIX purified from human plasma when tested in hemophilic B model. HepG2/rhFIX cell line produced the highest levels of rhFIX, representing an efficient in vitro expression system. This work opens up the possibility of significantly reducing the costs of rhFIX production, with implications for expanding hemophilia B treatment in developing countries. PMID:21838798

  15. Comparison of conventional and microlens-array agile beam steerers

    NASA Astrophysics Data System (ADS)

    McDearmon, Graham F.; Flood, Kevin M.; Finlan, J. Michael

    1995-05-01

    We analyzed the optical and mechanical performance of several designs of agile beam steerers based on refractive microlens arrays for sensing and imaging applications in the visible and infrared wavebands. Ray-trace analyses showed that the best design is capable of steering narrowband illumination +/- 25 degree(s) in two dimensions with nearly diffraction-limited performance. The maximum steering angle depends on the materials. We found that imaging the field of regard takes significantly more time than scanning it unless cameras with very high frame-rates are used. We performed many parametric studies that can be used to optimize the design for any application. We compared optimal designs for microlens-array and conventional galvanometric agile beam steerers. The microlens-array agile beam steerer provides significant improvements in scanning speed, random access pointing, energy consumption, mass reduction, and volume reduction.

  16. A study of a proposed modified torsional agility metric

    NASA Technical Reports Server (NTRS)

    Valasek, John; Eggold, David P.; Downing, David R.

    1991-01-01

    A new candidate lateral agility metric, the modified torsional agility parameter, is proposed and tested through generic, nonlinear, non-real-time flight simulation programs of the F-18 and F-5A. The metric is aimed at quantifying high subsonic loaded roll capabilities which might be useful in modern air combat. The metric is considered to be straightforward for testing and measuring based on nonreal-time unmanned flight simulation. The metric is found to be sensitive to pilot input errors of less than full lateral stick to capture bank angle, when tested using unmanned flight simulations. It is suggested that, for redesigned configurations of both aircraft with improved lateral agility, the major benefit would be provided by fast and highly effective rudders, and a high level of pitch, roll, and yaw damping at moderate to high normal load factor levels.

  17. On-ground calibration of AGILE-GRID with a photon beam: results and lessons for the future

    NASA Astrophysics Data System (ADS)

    Cattaneo, P. W.; Rappoldi, A.

    2013-06-01

    On the AGILE satellite, there is the Gamma Ray Imaging Detector (GRID) consisting of a Silicon Tracker (ST), a Cesium Iodide Mini-Calorimeter and an Anti-Coincidence system of plastic scintillator bars. The ST needs a calibration with a γ-ray beam to validate the simulation used to calculate the detector response versus the energy and the direction of the γ rays. A tagged γ-ray beam line was designed at the Beam Test Facility of the Laboratori Nazionali of Frascati, generated by an electron beam through bremsstrahlung in a position-sensitive target. The γ-ray energy is deduced by the difference with the post-bremsstrahlung electron energy [P. W. Cattaneo, et al., Characterization of a tagged γ-ray beam line at the daΦne beam test facility, Nucl. Instr. and Meth. A 674 (2012) 55-66; P. W. Cattaneo, et al., First results about on-ground calibration of the silicon tracker for the agile satellite, Nucl. Instr. and Meth. A 630(1) (2011) 251-257.]. The electron energy is measured by a spectrometer consisting of a dipole magnet and an array of position sensitive silicon strip detectors, the Photon Tagging System (PTS). In this paper the setup and the calibration of AGILE performed in 2005 are described.

  18. Development of a Computer Program for Analyzing Preliminary Aircraft Configurations in Relationship to Emerging Agility Metrics

    NASA Technical Reports Server (NTRS)

    Bauer, Brent

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition, one study illustrates the module's ability to optimize a configuration's agility performance.

  19. Analysis and optimization of preliminary aircraft configurations in relationship to emerging agility metrics

    NASA Technical Reports Server (NTRS)

    Sandlin, Doral R.; Bauer, Brent Alan

    1993-01-01

    This paper discusses the development of a FORTRAN computer code to perform agility analysis on aircraft configurations. This code is to be part of the NASA-Ames ACSYNT (AirCraft SYNThesis) design code. This paper begins with a discussion of contemporary agility research in the aircraft industry and a survey of a few agility metrics. The methodology, techniques and models developed for the code are then presented. Finally, example trade studies using the agility module along with ACSYNT are illustrated. These trade studies were conducted using a Northrop F-20 Tigershark aircraft model. The studies show that the agility module is effective in analyzing the influence of common parameters such as thrust-to-weight ratio and wing loading on agility criteria. The module can compare the agility potential between different configurations. In addition one study illustrates the module's ability to optimize a configuration's agility performance.

  20. Production Process for Stem Cell Based Therapeutic Implants: Expansion of the Production Cell Line and Cultivation of Encapsulated Cells

    NASA Astrophysics Data System (ADS)

    Weber, C.; Pohl, S.; Poertner, R.; Pino-Grace, Pablo; Freimark, D.; Wallrapp, C.; Geigle, P.; Czermak, P.

    Cell based therapy promises the treatment of many diseases like diabetes mellitus, Parkinson disease or stroke. Microencapsulation of the cells protects them against host-vs-graft reactions and thus enables the usage of allogenic cell lines for the manufacturing of cell therapeutic implants. The production process of such implants consists mainly of the three steps expansion of the cells, encapsulation of the cells, and cultivation of the encapsulated cells in order to increase their vitality and thus quality. This chapter deals with the development of fixed-bed bioreactor-based cultivation procedures used in the first and third step of production. The bioreactor system for the expansion of the stem cell line (hMSC-TERT) is based on non-porous glass spheres, which support cell growth and harvesting with high yield and vitality. The cultivation process for the spherical cell based implants leads to an increase of vitality and additionally enables the application of a medium-based differentiation protocol.

  1. A new optical axle measuring instrument for wheel alignment in assembly-line production

    SciTech Connect

    Bruhn, H.; Felske, A.

    1985-01-01

    The newly developed optical measuring system allows adjustment of front and rear wheel angularities - toe, camber, caster - in assembly-line production. There is no need to align the car, since the measuring base for the angle alignment is formed by the car itself. Defined spring compression values and direct caster angle determination lead to higher accuracy. Adjustment is carried out directly on the assembly line. Measuring pits are not required. The working time for each car and the working area required, which are important cost factors, are markedly lower than with conventional instruments. The axle measuring system was developed for the VW Vanagon, but can also be used for passenger car chassis. The measuring principle, the optical and mechanical design of the device, and a statistical analysis of over 100 cars aligned by means of this system are described in comparison with conventional measuring instruments.

  2. The PiggyBac transposon enhances the frequency of CHO stable cell line generation and yields recombinant lines with superior productivity and stability.

    PubMed

    Matasci, Mattia; Baldi, Lucia; Hacker, David L; Wurm, Florian M

    2011-09-01

    Generating stable, high-producing mammalian cell lines is a major bottleneck in the manufacture of recombinant therapeutic proteins. Conventional gene transfer methods for cell line generation rely on random plasmid integration, resulting in unpredictable and highly variable levels of transgene expression. As a consequence, a large number of stably transfected cells must be analyzed to recover a few high-producing clones. Here we present an alternative gene transfer method for cell line generation based on transgene integration mediated by the piggyBac (PB) transposon. Recombinant Chinese hamster ovary (CHO) cell lines expressing a tumor necrosis factor receptor:Fc fusion protein were generated either by PB transposition or by conventional transfection. Polyclonal populations and isolated clonal cell lines were characterized for the level and stability of transgene expression for up to 3 months in serum-free suspension culture. Pools of transposed cells produced up to fourfold more recombinant protein than did the pools generated by standard transfection. For clonal cell lines, the frequency of high-producers was greater following transposition as compared to standard transfection, and these clones had a higher volumetric productivity and a greater number of integrated transgenes than did those generated by standard transfection. In general, the volumetric productivity of the cell pools and individual cell lines generated by transposition was stable for up to 3 months in the absence of selection. Our results indicate that the PB transposon supports the generation of cell lines with high and stable transgene expression at an elevated frequency relative to conventional transfection. Thus, PB-mediated gene delivery is expected to reduce the extent of recombinant cell line screening. PMID:21495018

  3. Biorobotics: using robots to emulate and investigate agile locomotion.

    PubMed

    Ijspeert, Auke J

    2014-10-10

    The graceful and agile movements of animals are difficult to analyze and emulate because locomotion is the result of a complex interplay of many components: the central and peripheral nervous systems, the musculoskeletal system, and the environment. The goals of biorobotics are to take inspiration from biological principles to design robots that match the agility of animals, and to use robots as scientific tools to investigate animal adaptive behavior. Used as physical models, biorobots contribute to hypothesis testing in fields such as hydrodynamics, biomechanics, neuroscience, and prosthetics. Their use may contribute to the design of prosthetic devices that more closely take human locomotion principles into account. PMID:25301621

  4. Lean and Agile Development of the AITS Ground Software System

    NASA Astrophysics Data System (ADS)

    Richters, Mark; Dutruel, Etienne; Mecredy, Nicolas

    2013-08-01

    We present the ongoing development of a new ground software system used for integrating, testing and operating spacecraft. The Advanced Integration and Test Services (AITS) project aims at providing a solution for electrical ground support equipment and mission control systems in future Astrium Space Transportation missions. Traditionally ESA ground or flight software development projects are conducted according to a waterfall-like process as specified in the ECSS-E-40 standard promoted by ESA in the European industry. In AITS a decision was taken to adopt an agile development process. This work could serve as a reference for future ESA software projects willing to apply agile concepts.

  5. Performance of 300-mm lithography tools in a pilot production line

    NASA Astrophysics Data System (ADS)

    Maltabes, John G.; Charles, Alain B.; Hornig, Steffen R.; Schedel, Thorsten; Ganz, Dietmar; Schmidt, Sebastian

    1999-07-01

    Semiconductor 300 is the first pilot manufacturing facility for 300mm wafers in the world. This company is a joint venture between Siemens and Motorola, formed for the purpose of developing a 300mm manufacturing tool set. The pilot line contains a full compliment of tools for DRAM manufacturing. This paper discusses the performance of the initial 300mm lithography tool set installed in our pilot line in Dresden, Germany. The product used for evaluating and debugging the tool set is a 0.25-micron ground rule 64 Meg DRAM. This was chosen for the ability to easily benchmark against 200mm DRAM manufacturing data. We have produced several lots of wafers with measurable yield. These lots have produced data on overlay, CD and run to run performance of the lithography tools on actual product. We have data on resist coating, and develop uniformity. With several lithography tools installed we have generated a large amount of mix and match data. In addition several challenges for successful lithography have surfaced related entirely to the increase in wafer size. Film, etch, polish and thermal non-uniformity have impacted the throughput and performance of the lithography tools. The installation of the first integrated 300mm pilot line has also produced data on the impact larger wafer size has on tool logistics, for example fab layout, installation schedules and wafer and lot transport. While technical data is always important, the main reason for converting to 300mm is economic. We now have preliminary data on the comparison of 200 tools to 300mm tools in terms of footprint, throughput, and productivity gains for equivalent square centimeters of silicon. With this data we can start to make preliminary recommendations for 300mm manufacturing tools.

  6. On-line optimal control for fed-batch culture of baker's yeast production

    SciTech Connect

    Wu, W.T.; Chen, K.C.; Chiou, H.W.

    1985-05-01

    A method of on-line optimal control for fed-batch culture of bakers yeast production is proposed. The feed rate is taken as the control variable. The specific growth rate of the yeast is the output variable and is determined from the balance equation of oxygen. A moving model is obtained by using the data from the feed rate and the specific growth rate. Based on the moving model, an optimal feed rate for fed-batch culture is then achieved. 11 references.

  7. Modeling a distributed environment for a petroleum reservoir engineering application with software product line

    NASA Astrophysics Data System (ADS)

    de Faria Scheidt, Rafael; Vilain, Patrícia; Dantas, M. A. R.

    2014-10-01

    Petroleum reservoir engineering is a complex and interesting field that requires large amount of computational facilities to achieve successful results. Usually, software environments for this field are developed without taking care out of possible interactions and extensibilities required by reservoir engineers. In this paper, we present a research work which it is characterized by the design and implementation based on a software product line model for a real distributed reservoir engineering environment. Experimental results indicate successfully the utilization of this approach for the design of distributed software architecture. In addition, all components from the proposal provided greater visibility of the organization and processes for the reservoir engineers.

  8. TSH-induced cyclic AMP production in an ovine thyroid cell line: OVNIS 5H.

    PubMed

    Fayet, G; Aouani, A; Hovsépian, S

    1986-01-01

    The TSH-induced cyclic AMP response was studied using a 3-year-old ovine thyroid cell line TSH-independent for growth: OVNIS 5H. The kinetics of cyclic AMP production was followed both in cell layers and in cell culture media, with or without phosphodiesterase inhibitor. It is noteworthy that following the first wave in cyclic AMP obtained within minutes, we observed later a sustained exponential increase in cyclic AMP during the 5 days following TSH stimulation. A bioassay of TSH was derived allowing measurement of 1 microU/ml TSH from a crude bTSH preparation. PMID:3000830

  9. Agile hardware and software systems engineering for critical military space applications

    NASA Astrophysics Data System (ADS)

    Huang, Philip M.; Knuth, Andrew A.; Krueger, Robert O.; Garrison-Darrin, Margaret A.

    2012-06-01

    The Multi Mission Bus Demonstrator (MBD) is a successful demonstration of agile program management and system engineering in a high risk technology application where utilizing and implementing new, untraditional development strategies were necessary. MBD produced two fully functioning spacecraft for a military/DOD application in a record breaking time frame and at dramatically reduced costs. This paper discloses the adaptation and application of concepts developed in agile software engineering to hardware product and system development for critical military applications. This challenging spacecraft did not use existing key technology (heritage hardware) and created a large paradigm shift from traditional spacecraft development. The insertion of new technologies and methods in space hardware has long been a problem due to long build times, the desire to use heritage hardware, and lack of effective process. The role of momentum in the innovative process can be exploited to tackle ongoing technology disruptions and allowing risk interactions to be mitigated in a disciplined manner. Examples of how these concepts were used during the MBD program will be delineated. Maintaining project momentum was essential to assess the constant non recurring technological challenges which needed to be retired rapidly from the engineering risk liens. Development never slowed due to tactical assessment of the hardware with the adoption of the SCRUM technique. We adapted this concept as a representation of mitigation of technical risk while allowing for design freeze later in the program's development cycle. By using Agile Systems Engineering and Management techniques which enabled decisive action, the product development momentum effectively was used to produce two novel space vehicles in a fraction of time with dramatically reduced cost.

  10. Estimation of genetic associations between reproduction and production traits based on a sire and dam line with common ancestry.

    PubMed

    Kapell, D N R G; Ashworth, C J; Walling, G A; Lawrence, A B; Edwards, S A; Roehe, R

    2009-10-01

    Genetic parameters for survival, reproduction and production traits were estimated for a sire and dam line, originating from one Large White breed separated more than 25 years ago. The change in parameters due to different selection pressure on reproduction and production traits in both lines was also examined. Data collected between 1990 and 2007 were available for the analysis of reproduction traits in 4713 litters (sire line) and 14836 litters (dam line) and for the production traits in 58329 pigs (sire line) and 108912 pigs (dam line). Genetic parameters were estimated using a Bayesian approach. Average phenotypic differences between lines were substantial with 1.5 more piglets born in the dam line and 1.7 mm less backfat thickness (BF) in the sire line. Based on a multiple trait analysis which included both reproduction and production traits, heritabilities for survival and litter size traits in the sire (or dam) line were estimated at 0.03 ± 0.01 (0.06 ± 0.01) for percentage of stillborn piglets (SB), 0.10 ± 0.03 (0.11 ± 0.01) for total number of piglets born (NBT) and 0.09 ± 0.03 (0.09 ± 0.01) for number of piglets born alive. Heritabilities for production traits were estimated at 0.29 ± 0.01 (0.29 ± 0.01) for average daily gain, 0.50 ± 0.01 (0.42 ± 0.01) for BF and 0.41 ± 0.01 for muscle depth. Selection pressure on litter size in the dam line resulted in a slightly unfavourable correlation for SB-NBT (0.21 ± 0.11), which was only marginally unfavourable in the sire line (0.06 ± 0.24). Selection pressure on BF in the sire line may have resulted in the moderately undesirable correlation with SB (-0.46 ± 0.15), which was not significant in the dam line (-0.08 ± 0.06). Changing the base population in the dam line to animals born since the year 2000 indicated that selection pressure on different traits has altered the heritabilities and correlations of the traits within the line. The undesirable correlations between survival at birth and

  11. A prototype on-line work procedure system for radioisotope thermoelectric generator production

    SciTech Connect

    Kiebel, G.R.

    1991-09-01

    An on-line system to manage work procedures is being developed to support radioisotope thermoelectric generator (RTG) assembly and testing in a new production facility. This system implements production work procedures as interactive electronic documents executed at the work site with no intermediate printed form. It provides good control of the creation and application of work procedures and provides active assistance to the worker in performing them and in documenting the results. An extensive prototype of this system is being evaluated to ensure that it will have all the necessary features and that it will fit the user's needs and expectations. This effort has involved the Radioisotope Power Systems Facility (RPSF) operations organization and technology transfer between Westinghouse Hanford Company (Westinghouse Hanford) and EG G Mound Applied Technologies Inc. (Mound) at the US Department of Energy (DOE) Mound Site. 1 ref.

  12. Lipogenesis and glucose production in dwarf carrier and normal lines of chicks

    SciTech Connect

    Rosebrough, R.W.; McMurtry, J.P.; Steele, N.C.

    1986-03-01

    Diets containing 13, 16, 19, or 23% protein and 70% carbohydrate calories were fed to dwarf heterozygote (dw) and normal (Dw) chickens to determine the effects of age (weeks) and protein on intermediary metabolism. In vitro lipogenesis (IVL) was determined by the incorporation of acetate (10 and 20 mM 2/sup 14/C-Acet/2hr) into hepatic fatty acids. Net glucose production (NGP) was determined as the difference in media glucose in the presence or absence of 10 mM pyruvate. Values were expressed per unit of relative liver size (..mu..moles/100 g BWt). Serum insulin (INS; ng/ml) was determined by homologous radioimmunoassay. Results indicate that although INS was greater in Dw than in dw, this difference was not reflected in a decreased rate of glucose production to accompany the difference in IVL between the two lines. Moreover, an increase in dietary protein resulted in a decrease in IVL but an increase in INS.

  13. Analysis of cell line variation in biochemical production of protoporphyrin IX

    NASA Astrophysics Data System (ADS)

    Gibbs, Summer L.; Chen, Bin; O'Hara, Julia A.; Hoopes, P. Jack; Hasan, Tayyaba; Pogue, Brian W.

    2006-02-01

    Protoporphyrin IX (PpIX) is produced via the heme synthesis pathway by the cell following administration of aminolevulinic acid (ALA). ALA synthase, the enzyme that produces ALA in the cell from glycine and succinyl-coenzyme A, is inhibited in a feedback mechanism by heme and thus is the rate limiting enzyme in the heme synthesis pathway. Since ALA is administered systemically, the rate limiting step that naturally exists in the cells is bypassed, however it is currently unclear why cells have different rate limiting steps in the ALA-PpIX synthesis pathway, and more specifically which types of cancer cells are most productive. It has been determined that when the same amount of ALA is administered to a wide panel of cancer cells in vitro that vastly differing amounts of PpIX are produced. The steps for the ALA-PpIX pathway occur in and around the mitochondria of the cell, but interestingly no correlation is seen between PpIX production and mitochondrial content of the cell, following ALA administration. However, total cell area shows positive correlation with PpIX production. Administration of the iron chelator, 1,2-dimethyl-3-hydroxy-4-pyridone (L1) in combination with ALA allows the final step in the heme synthesis pathway, conversion of PpIX to heme, to be delayed and thus increases the detectable amount of PpIX in each cell line. The cell lines that have the lowest PpIX production following administration of ALA alone show the largest increase in production following the combined administration of ALA and L1. PpIX fluorescence is thought to be a measure of cellular activity and the goal of the current study was to determine which cell lines would be the most promising targets for fluorescence detection or monitoring response to therapy. The results indicate that the cells with larger size and larger numbers of mitochondria may be good potential targets for this therapy. While this conclusion may appear obvious, it is not universally true, and cellular specific

  14. Toward a production-line classification of metallic satin-finished surfaces using coherent light

    NASA Astrophysics Data System (ADS)

    Lopez de Meneses, Yuri; Meylan, Gregoire; Monay, Florent; Jacot, Jacques

    2002-10-01

    Some manufacturing processes, such as satin finish on stainless steel parts for the watchmaking and biomedical industries, apply purely aesthetic, global criteria for their quality control. This control is currently performed by human operators, and is found to be subjective, due to variability in operator judgement. This project aims to develop a device for automatic, production-line classification of satin finish according to the aesthetic criteria currently applied in the watchmaking industry. We exploit two coherent light phenomena to produce features to classify the parts into the same classes indicated by human operators. The analysis of the optical Fourier transform and the scattering pattern are used to generate high-dimensional feature vectors for their subsequent classification. The vectors, corresponding to different regions of the part surface, are classified using Principal Component Analysis and Kohonen networks. Experimental results show that both optical phenomena provide features capable of discriminating between conforming and nonconforming parts. Classification is simple enough to afford an inspection in under 1 s and its robustness has also been verified. We have thus completed a first step towards a simple, production-line device capable of providing an automatic, objective evaluation based on aesthetic quality criteria.

  15. The influence of agility training on physiological and cognitive performance.

    PubMed

    Lennemann, Lynette M; Sidrow, Kathryn M; Johnson, Erica M; Harrison, Catherine R; Vojta, Christopher N; Walker, Thomas B

    2013-12-01

    Agility training (AT) has recently been instituted in several military communities in hopes of improving combat performance and general fitness. The purpose of this study was to determine how substituting AT for traditional military physical training (PT) influences physical and cognitive performance. Forty-one subjects undergoing military technical training were divided randomly into 2 groups for 6 weeks of training. One group participated in standard military PT consisting of calisthenics and running. A second group duplicated the amount of exercise of the first group but used AT as their primary mode of training. Before and after training, subjects completed a physical and cognitive battery of tests including V[Combining Dot Above]O2max, reaction time, Illinois Agility Test, body composition, visual vigilance, dichotic listening, and working memory tests. There were significant improvements within the AT group in V[Combining Dot Above]O2max, Illinois Agility Test, visual vigilance, and continuous memory. There was a significant increase in time-to-exhaustion for the traditional group. We conclude that AT is as effective or more effective as PT in enhancing physical fitness. Further, it is potentially more effective than PT in enhancing specific measures of physical and cognitive performance, such as physical agility, memory, and vigilance. Consequently, we suggest that AT be incorporated into existing military PT programs as a way to improve war-fighter performance. Further, it seems likely that the benefits of AT observed here occur in various other populations. PMID:23442271

  16. On the Biomimetic Design of Agile-Robot Legs

    PubMed Central

    Garcia, Elena; Arevalo, Juan Carlos; Muñoz, Gustavo; Gonzalez-de-Santos, Pablo

    2011-01-01

    The development of functional legged robots has encountered its limits in human-made actuation technology. This paper describes research on the biomimetic design of legs for agile quadrupeds. A biomimetic leg concept that extracts key principles from horse legs which are responsible for the agile and powerful locomotion of these animals is presented. The proposed biomimetic leg model defines the effective leg length, leg kinematics, limb mass distribution, actuator power, and elastic energy recovery as determinants of agile locomotion, and values for these five key elements are given. The transfer of the extracted principles to technological instantiations is analyzed in detail, considering the availability of current materials, structures and actuators. A real leg prototype has been developed following the biomimetic leg concept proposed. The actuation system is based on the hybrid use of series elasticity and magneto-rheological dampers which provides variable compliance for natural motion. From the experimental evaluation of this prototype, conclusions on the current technological barriers to achieve real functional legged robots to walk dynamically in agile locomotion are presented. PMID:22247667

  17. Agile Software Development Methods: A Comparative Review1

    NASA Astrophysics Data System (ADS)

    Abrahamsson, Pekka; Oza, Nilay; Siponen, Mikko T.

    Although agile software development methods have caught the attention of software engineers and researchers worldwide, scientific research still remains quite scarce. The aim of this study is to order and make sense of the different agile approaches that have been proposed. This comparative review is performed from the standpoint of using the following features as the analytical perspectives: project management support, life-cycle coverage, type of practical guidance, adaptability in actual use, type of research objectives and existence of empirical evidence. The results show that agile software development methods cover, without offering any rationale, different phases of the software development life-cycle and that most of these methods fail to provide adequate project management support. Moreover, quite a few methods continue to offer little concrete guidance on how to use their solutions or how to adapt them in different development situations. Empirical evidence after ten years of application remains quite limited. Based on the results, new directions on agile methods are outlined.

  18. Tailoring Agility: Promiscuous Pair Story Authoring and Value Calculation

    NASA Astrophysics Data System (ADS)

    Tendon, Steve

    This chapter describes how a multi-national software organization created a business plan involving business units from eight countries that followed an agile way, after two previously failed attempts with traditional approaches. The case is told by the consultant who initiated implementation of agility into requirements gathering, estimation and planning processes in an international setting. The agile approach was inspired by XP, but then tailored to meet the peculiar requirements. Two innovations were critical. The first innovation was promiscuous pair story authoring, where user stories were written by two people (similarly to pair programming), and the pairing changed very often (as frequently as every 15-20 minutes) to achieve promiscuity and cater for diverse point of views. The second innovation was an economic value evaluation (and not the cost) which was attributed to stories. Continuous recalculation of the financial value of the stories allowed to assess the projects financial return. In this case implementation of agility in the international context allowed the involved team members to reach consensus and unanimity of decisions, vision and purpose.

  19. Wavelength-Agile External-Cavity Diode Laser for DWDM

    NASA Technical Reports Server (NTRS)

    Pilgrim, Jeffrey S.; Bomse, David S.

    2006-01-01

    A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

  20. Impact of Agile Software Development Model on Software Maintainability

    ERIC Educational Resources Information Center

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  1. A Capstone Course on Agile Software Development Using Scrum

    ERIC Educational Resources Information Center

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  2. In-flight simulation of high agility through active control: Taming complexity by design

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Bradley, Roy

    1993-01-01

    The motivation for research into helicopter agility stems from the realization that marked improvements relative to current operational types are possible, yet there is a dearth of useful criteria for flying qualities at high performance levels. Several research laboratories are currently investing resources in developing second generation airborne rotorcraft simulators. The UK's focus has been the exploitation of agility through active control technology (ACT); this paper reviews the results of studies conducted to date. The conflict between safety and performance in flight research is highlighted and the various forms of safety net to protect against system failures are described. The role of the safety pilot, and the use of actuator and flight envelope limiting are discussed. It is argued that the deep complexity of a research ACT system can only be tamed through a requirement specification assembled using design principles and cast in an operational simulation form. Work along these lines conducted at DRA is described, including the use of the Jackson System Development method and associated Ada simulation.

  3. Common display performance requirements for military and commercial aircraft product lines

    NASA Astrophysics Data System (ADS)

    Hoener, Steven J.; Behrens, Arthur J.; Flint, John R.; Jacobsen, Alan R.

    2001-09-01

    Obtaining high quality Active Matrix Liquid Crystal (AMLCD) glass to meet the needs of the commercial and military aerospace business is a major challenge, at best. With the demise of all domestic sources of AMLCD substrate glass, the industry is now focused on overseas sources, which are primarily producing glass for consumer electronics. Previous experience with ruggedizing commercial glass leads to the expectation that the aerospace industry can leverage off the commercial market. The problem remains, while the commercial industry is continually changing and improving its products, the commercial and military aerospace industries require stable and affordable supplies of AMLCD glass for upwards of 20 years to support production and maintenance operations. The Boeing Engineering and Supplier Management Process Councils have chartered a group of displays experts from multiple aircraft product divisions within the Boeing Company, the Displays Process Action Team (DPAT), to address this situation from an overall corporate perspective. The DPAT has formulated a set of Common Displays Performance Requirements for use across the corporate line of commercial and military aircraft products. Though focused on the AMLCD problem, the proposed common requirements are largely independent of display technology. This paper describes the strategy being pursued within the Boeing Company to address the AMLCD supply problem and details the proposed implementation process, centered on common requirements for both commercial and military aircraft displays. Highlighted in this paper are proposed common, or standard, display sizes and the other major requirements established by the DPAT, along with the rationale for these requirements.

  4. Production of infectious duck hepatitis B virus in a human hepatoma cell line.

    PubMed Central

    Galle, P R; Schlicht, H J; Fischer, M; Schaller, H

    1988-01-01

    The differentiated human hepatoma cell line Hep-G2 was transfected with cloned duck hepatitis B virus (DHBV) DNA. Introduction of closed circular DNA into the human liver cells resulted in the production of viral proteins: core antigen was detected in the cytoplasm, and e antigen, a related product, was secreted into the medium. Moreover, viral particles were released into the tissue culture medium which were indistinguishable from authentic DHBV by density, antigenicity, DNA polymerase activity, and morphology. Intravenous injection of tissue culture-derived DHBV particles into Pekin ducks established DHBV infection. In conclusion, transfection of human hepatoma cells with cloned DHBV DNA results in the production of infectious virus, as occurs with cloned human hepatitis B virus DNA. Human liver cells are therefore competent to support production of the avian and mammalian hepadnaviruses, indicating that liver-specific viral gene expression is controlled by evolutionarily conserved mechanisms. This new DHBV transfection system offers the opportunity to rapidly produce mutated DHBV which then can be further investigated in Pekin ducks. Images PMID:2833623

  5. Organizational Agility and Complex Enterprise System Innovations: A Mixed Methods Study of the Effects of Enterprise Systems on Organizational Agility

    ERIC Educational Resources Information Center

    Kharabe, Amol T.

    2012-01-01

    Over the last two decades, firms have operated in "increasingly" accelerated "high-velocity" dynamic markets, which require them to become "agile." During the same time frame, firms have increasingly deployed complex enterprise systems--large-scale packaged software "innovations" that integrate and automate…

  6. Deletion of a telomeric region on chromosome 8 correlates with higher productivity and stability of CHO cell lines.

    PubMed

    Ritter, Anett; Voedisch, Bernd; Wienberg, Johannes; Wilms, Burkhard; Geisse, Sabine; Jostock, Thomas; Laux, Holger

    2016-05-01

    Chinese Hamster Ovary (CHO) cells are widely used for large scale production of recombinant biopharmaceuticals. Although these cells have been extensively used, a demand to further increase the performance, for example, to facilitate the process of clone selection to isolate the highest producing cell lines that maintain stability of production over time is still existing. We compared gene expression profiles of high versus low producing CHO clones to identify regulated genes which can be used as biomarkers during clone selection or for cell line engineering. We present evidence that increased production rates and cell line stability are correlated with the loss of the telomeric region of the chromosome 8. A new parental CHO cell line lacking this region was generated and its capability for protein production was assessed. The average volumetric productivity of cells after gene transfer and selection was found to be several fold improved, facilitating the supply of early drug substance material to determine for example, quality. In addition, significantly more cell clones with a higher average productivity and higher protein production stability were obtained with the new host cell line after single cell cloning. This allows reduced efforts in single cell sorting, screening of fewer clones and raises the opportunity to circumvent time and labor-intensive stability studies. Biotechnol. Bioeng. 2016;113: 1084-1093. © 2015 Wiley Periodicals, Inc. PMID:26523402

  7. Microcarrier culture of lepidopteran cell lines: implications for growth and recombinant protein production.

    PubMed

    Ikonomou, Laertis; Drugmand, Jean-Christophe; Bastin, Georges; Schneider, Yves-Jacques; Agathos, Spiros N

    2002-01-01

    Several microcarrier systems were screened with Sf-9 and High-Five cell lines as to their ability to support cell growth and recombinant (beta-galactosidase) protein production. Growth of both cell lines on compact microcarriers, such as Cytodex-1 and glass beads, was minimal, as cells detached easily from the microcarrier surface and grew as single cells in the medium. Cell growth was also problematic on Cytopore-1 and -2 porous microcarriers. Cells remained attached for several days inside the microcarrier pores, but no cell division and proliferation were observed. On the contrary, insect cells grew well in the interior of Fibra-Cel disks mainly as aggregates at points of fiber intersection, reaching final (plateau) densities of about 4 x 10(6) (Sf-9) and 2.7 x 10(6) (High-Five) cells mL(-1) (8 x 10(6) and 5.5 x 10(6) cells per cm(2) of projected disk area, respectively). Their growth was described well by the logistic equation, which takes into account possible inhibition effects. Beta-Galactosidase (beta-gal) production of Sf-9 cells on Fibra-Cel disks (infected at 3.3 x 10(6) cells mL(-1)) was prolonged (192 h), and specific protein production was similar to that of high-density free cell infection. Cultispher-S microcarriers were found to be a very efficient system for the growth of High-Five cells, whereas no growth of Sf-9 cells took place for the same system. Concentrations of about 9 x 10(6) cells mL(-1) were reached within 120 h, with cell growth in both microcarriers and aggregates, appearance of cellular bridges between microcarriers and aggregates, and eventual formation of macroaggregates incorporating several microcarriers. Specific protein productions after beta-gal baculovirus infection at increasing cell concentrations were almost constant, thus leading to elevated volumetric protein production: final beta-gal titers of 946, 1728, and 1484 U mL(-1) were obtained for infection densities of 3.4, 7.2, and 8.9 x 10(6) cells mL(-1), respectively

  8. Mercury transformation and distribution across a polyvinyl chloride (PVC) production line in China.

    PubMed

    Ren, Wen; Duan, Lei; Zhu, Zhenwu; Du, Wen; An, Zhongyi; Xu, Lingjun; Zhang, Chi; Zhuo, Yuqun; Chen, Changhe

    2014-02-18

    The production of polyvinyl chloride (PVC) via the calcium carbide process utilizes a catalyst containing large amounts of mercury (Hg) and is therefore one of the most important sources of anthropogenic Hg in China. To measure the emission of Hg from PVC production, we established a flowchart for the calcium carbide process, for which we quantified the Hg content of the material/product at each step. Results indicated that 71.5% of the total Hg (Hg(T)) was lost from the catalyst, most of which was recovered by the Hg remover, accounting for 46.0% of the total Hg (Hg(T)). We determined that 3.7% of the Hg(T) was released into the environment, mostly in solid wastes and byproducts such as hydrochloric acid. Furthermore, no Hg has been detected in the PVC end product. However, we were only able to account for 78.1% of the Hg across the whole system, leaving 21.7% unaccounted for in the mass balance. A rough estimation indicates that most of the "missing" Hg had accumulated in deposits on the inner surface of converters and downstream pipelines; however, the emission to the atmosphere was ≤ 1% of the Hg(T). For a PVC production line equipped with a Hg remover, emissions of Hg to the atmosphere have been estimated to be 4.9 g per tonne PVC. Currently, almost all calcium carbide facilities have been equipped with a Hg remover, which may reduce the release of Hg in China by ∼ 500 t/year. PMID:24428761

  9. Interleukin-8 production by the human colon epithelial cell line HT-29: modulation by interleukin-13.

    PubMed Central

    Kolios, G.; Robertson, D. A.; Jordan, N. J.; Minty, A.; Caput, D.; Ferrara, P.; Westwick, J.

    1996-01-01

    1. We have determined which cytokines induce and modulate the production of the chemokine interleukin-8 (IL-8) by the human colonic epithelial cell line HT-29. 2. Growth arrested cell cultures were stimulated with the human recombinant cytokines interleukin-1 alpha (IL-1 alpha), tumour necrosis factor-alpha (TNF-alpha), interferon-gamma (IFN-gamma), interleukin-13 (IL-13), interleukin-10 (IL-10) or vehicle added alone or in combination. The production of IL-8 was determined by enzyme-linked immunosorbent assay (ELISA) and IL-8 messenger RNA expression by Northern blot analysis. 3. The production of IL-8 in unstimulated cells was undetectable by both ELISA and Northern blot analysis. 4. HT-29 cells produced IL-8 following stimulation with IL-1 alpha or TNF-alpha in a time- and a concentration-dependent manner, while IFN-gamma, IL-10 and IL-13 did not induce IL-8 production by HT-29 cells. 5. IL-13 was found to up-regulate significantly (P < 0.01) the IL-1 alpha but not the TNF-alpha-induced IL-8 generation by HT-29 cells. In contrast, IL-10 had no effect on either IL-1 alpha or TNF-alpha-induced IL-8 production. 6. Experiments using cycloheximide demonstrated that this synergistic effect of IL-13 and IL-1 alpha on IL-8 secretion was not through de novo protein synthesis. Using actinomycin-D, we demonstrated that the IL-13 up-regulation was at the level of transcription rather than messenger RNA stability. 7. These findings suggest that colonic epithelial cells have a functional IL-13 receptor, which is coupled to an up-regulation of IL-1 alpha, but not TNF-alpha induced IL-8 generation. Images Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 PMID:8886420

  10. Exponentiation for products of Wilson lines within the generating function approach

    NASA Astrophysics Data System (ADS)

    Vladimirov, A. A.

    2015-06-01

    We present the generating function approach to the perturbative exponentiation of correlators of a product of Wilson lines and loops. The exponentiated expression is presented in closed form as an algebraic function of correlators of known operators, which can be seen as a generating function for web diagrams. The expression is naturally split onto two parts: the exponentiation kernel, which accumulates all non-trivial information about web diagrams, and the defect of exponentiation, which reconstructs the matrix exponent and is a function of the exponentiation kernel. The detailed comparison of the presented approach with existing approaches to exponentiation is presented as well. We also give examples of calculations within the generating function exponentiation, namely, we consider different configurations of light-like Wilson lines in the multi-gluon-exchange-webs (MGEW) approximation. Within this approximation the corresponding correlators can be calculated exactly at any order of perturbative expansion by only algebraic manipulations. The MGEW approximation shows violation of the dipole formula for infrared singularities at three-loop order.

  11. Marine Mammal Train Oil Production Methods: Experimental Reconstructions of Norwegian Iron Age Slab-Lined Pits

    NASA Astrophysics Data System (ADS)

    Nilsen, Gørill

    2016-08-01

    Seal hunting and whaling have played an important part of people's livelihoods throughout prehistory as evidenced by rock carvings, remains of bones, artifacts from aquatic animals and hunting tools. This paper focuses on one of the more elusive resources relating to such activities: marine mammal blubber. Although marine blubber easily decomposes, the organic material has been documented from the Mesolithic Period onwards. Of particular interest in this article are the many structures in Northern Norway from the Iron Age and in Finland on Kökar, Åland, from both the Bronze and Early Iron Ages in which these periods exhibited traits interpreted as being related to oil rendering from marine mammal blubber. The article discusses methods used in this oil production activity based on historical sources, archaeological investigations and experimental reconstruction of Iron Age slab-lined pits from Northern Norway.

  12. Industrial Production of Therapeutic Proteins: Cell Lines, Cell Culture, and Purification

    NASA Astrophysics Data System (ADS)

    Zhu, Marie M.; Mollet, Michael; Hubert, Rene S.

    The biotechnology and pharmaceutical industries have seen a recent surge in the development of biological drug products manufactured from engineered mammalian cell lines. Since the hugely successful launch of human tissue plasminogen activator in 1987 and erythropoietin in 1988, the biopharmaceutical market has grown immensely. Global sales in 2003 exceeded US 30 billion.1 Currently, a total of 108 biotherapeutics are approved and available to patients (Table 32.1). In addition, 324 medically related, biotechnology-derived medicines for nearly 150 diseases are in clinical trials or under review by the U.S. Food and Drug Administration.2 These biopharmaceutical candidates promise to bring more and better treatments to patients. Compared to small molecule drugs, biotherapeutics show exquisite specificity with fewer off-target interactions and improved safety profiles.

  13. Marine Mammal Train Oil Production Methods: Experimental Reconstructions of Norwegian Iron Age Slab-Lined Pits

    NASA Astrophysics Data System (ADS)

    Nilsen, Gørill

    2016-02-01

    Seal hunting and whaling have played an important part of people's livelihoods throughout prehistory as evidenced by rock carvings, remains of bones, artifacts from aquatic animals and hunting tools. This paper focuses on one of the more elusive resources relating to such activities: marine mammal blubber. Although marine blubber easily decomposes, the organic material has been documented from the Mesolithic Period onwards. Of particular interest in this article are the many structures in Northern Norway from the Iron Age and in Finland on Kökar, Åland, from both the Bronze and Early Iron Ages in which these periods exhibited traits interpreted as being related to oil rendering from marine mammal blubber. The article discusses methods used in this oil production activity based on historical sources, archaeological investigations and experimental reconstruction of Iron Age slab-lined pits from Northern Norway.

  14. Metal mirror TMA, telescopes of the JSS product line: design and analysis

    NASA Astrophysics Data System (ADS)

    Kirschstein, Steffen; Koch, Amelia; Schöneich, Jürgen; Döngi, Frank

    2005-09-01

    For the increasing market of low-cost multispectral pushbroom scanners for spaceborne Earth remote sensing the Jena-Optronik GmbH have developed the JSS product line. They are typically operated on micro-satellites with strong resources constraints. This leads to instrument designs optimised with respect to minimum size and mass, power consumption, and cost. From various customer requirements, Jena-Optronik has derived the JSS product line of low-cost optical spaceborne scanners in the visible wavelength range. Three-mirror anastigmat (TMA) telescope designs have become a widespread design solution for fields of view from 2 to 12 deg. The design solution chosen by Jena-Optronik is based on all-aluminium telescopes. Novel ultra-precision milling and polishing techniques now give the opportunity to achieve the necessary optical surface quality for applications in the visible range. The TMA telescope optics design of the JSS-56 imager will be accommodated onboard the RapidEye spacecraft. The JSS-56 TMA with a F-number of 4.3 realised a swath width of 78km with a Ground pixel resolution of 6.5m × 6.5m. The aluminium mirrors are Ni coated to achieve a suitable surface polish quality. This paper discusses typical requirements for the thermal design the bimetallic effects of the mirrors. To achieve a nearly diffracted limited imaging the typical surface irregularities due to the turning process have to be addressed in the ray tracing models. Analysis and integration of real mirror data in the ZEMAX design software are demonstrated here and compared with build-in standard tolerance concepts.

  15. Production characteristics of Hy-Line W36 laying hens hatched from white and tinted eggs.

    PubMed

    Kim, E J; Purswell, J L; Evans, J D; Branton, S L

    2014-08-01

    Eggshell color can greatly influence visual appeal of table eggs, and within the United States, table eggs are normally sorted and marked according to eggshell color to maximize consumer appeal. Recently, table egg producers have noted increased incidence of "off-color" or tinted (TT) eggs derived from white egg laying breeder hens. Therefore, the objectives of this study were to determine the production characteristics and resultant eggshell color of laying hens hatched from different colored eggs. Hy-Line W36 eggs were obtained from a commercial breeder operation and eggshell color was assessed with a colorimeter to separate eggs into groups of tinted (TT) and nontinted (NT) eggs before incubation. Treatment groups were placed into separate hatching trays. At hatching, chicks from each treatment group were individually wing-banded. Pullets were randomly allocated into cages according to treatment groups at 18 wk. Birds were placed into individual cages, with 5 consecutive cages representing a treatment replicate. Each treatment was replicated 24 times for a total of 120 birds per treatment and fed a nutritionally complete layer diet. Production performance was evaluated from 18 to 34 wk of age. Average weekly egg production was calculated. Feed intake, egg weights, egg mass, feed conversion ratio, and egg color were analyzed every 2 wk. Birds were weighed every 4 wk until completion of the study. Birds hatched from TT eggs had significantly increased BW throughout the experimental period. Hen-day egg production was significantly different when compared with the NT treatment at 19 and 20 wk of age. Eggshell color was also found to be significantly different for the NT and TT groups with TT eggs being significantly further from true white. Selection of progeny based on eggshell color may be a criterion for selecting white egg layers as layers hatched from TT eggs resulted in more off-color eggs, which may affect consumer acceptance for buying white table eggs

  16. Nitric Oxide Oxidation Products are Increased in the Epithelial Lining Fluid of Children with Persistent Asthma

    PubMed Central

    Fitzpatrick, Anne M.; Brown, Lou Ann S.; Holguin, Fernando; Teague, W. Gerald

    2009-01-01

    Background Children with severe allergic asthma have persistent airway inflammation and oxidant stress. Objectives We hypothesized that children with severe allergic asthma would have increased concentrations of the NO oxidation products nitrite, nitrate, and nitrotyrosine in the proximal and distal airway epithelial lining fluid (ELF). We further hypothesized that NO oxidation products would be associated with higher exhaled nitric oxide (FENO), greater allergic sensitization, and lower pulmonary function. Methods Bronchoalveolar lavage (BAL) was obtained from 15 children with mild-to-moderate asthma, 30 children with severe allergic asthma, 5 non-asthmatic children and 20 non-smoking adults. The BAL was divided into proximal and distal portions and nitrite, nitrate, and nitrotyrosine were quantified. Results Children with mild-to-moderate and severe allergic asthma had increased concentrations of nitrite (adult control: 15 ± 3; pediatric control: 23 ± 4; mild-to-moderate asthma: 56 ± 26; severe asthma: 74 ± 18 µM), nitrate (37 ± 13 vs. 145 ± 38 vs. 711 ± 155 vs. 870 ± 168 µM) and nitrotyrosine (2 ± 1 vs. 3 ± 1 vs. 9 ± 3 vs. 10 ± 4 µM) in the proximal ELF. Similar results were seen in the distal ELF although the concentrations were significantly lower (p < 0.05 for each). Although univariate analyses revealed no associations between NO oxidation products and clinical features, multivariate analyses revealed FENO to be a significant predictor of NO oxidation in asthmatic children. Conclusions NO oxidation products are increased in the ELF of asthmatic children. The relationship between FENO and airway nitrosative stress is complicated and requires further study. PMID:19895987

  17. The technology base for agile manufacturing

    NASA Technical Reports Server (NTRS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-01-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  18. The technology base for agile manufacturing

    NASA Astrophysics Data System (ADS)

    Brost, R. C.; Strip, D. R.; Eicker, P. J.

    1993-02-01

    The effective use of information is a critical problem faced by manufacturing organizations that must respond quickly to market changes. As product runs become shorter, rapid and efficient development of product manufacturing facilities becomes crucial to commercial success. Effective information utilization is a key element to successfully meeting these requirements. This paper reviews opportunities for developing technical solutions to information utilization problems within a manufacturing enterprise and outlines a research agenda for solving these problems.

  19. Agile supply chain capabilities: emerging patterns as a determinant of competitive objectives

    NASA Astrophysics Data System (ADS)

    Yusuf, Yahaya Y.; Adeleye, E. O.; Sivayoganathan, K.

    2001-10-01

    Turbulent change caused by factors such as changing customer and technological requirements threatens manufacturers through lower product life cycles, profits and bleak survival prospects. Therefore, several companies are stressing flexibility and agility in order to respond, real time, to the unique needs of customers and markets. However, the resource competencies required are often difficult to mobilise and retain by single companies. It is therefore imperative for companies to co-operate and leverage complementary competencies. To this end, legally separate and spatially distributed companies are becoming integrated through Internet-based technologies. The paper reviews emerging patterns in supply chain integration. It also explores the relationship between the emerging patterns and attainment of competitive objectives. The results reported in the paper are based on data from a survey by questionnaire. The survey involved 600 companies in the UK, as part of a larger study of agile manufacturing. The study was driven by a conceptual model, which relates supply chain practices to competitive objectives. The analysis involves the use of factor analysis to reduce research variables to a few principal components. Subsequently, multiple regression was conducted to study the relationship amongst the reduced variables. The results validate the proposed conceptual model and lend credence to current thinking that supply chain integration is a vital tool for competitive advantage.

  20. Use of the Agilent 2100 bioanalyzer for rapid and reproducible molecular typing of Streptococcus pneumoniae.

    PubMed

    Hathaway, Lucy J; Brugger, Silvio; Martynova, Alina; Aebi, Suzanne; Mühlemann, Kathrin

    2007-03-01

    Restriction fragment length polymorphism (RFLP) analysis is an economic and fast technique for molecular typing but has the drawback of difficulties in accurately sizing DNA fragments and comparing banding patterns on agarose gels. We aimed to improve RFLP for typing of the important human pathogen Streptococcus pneumoniae and to compare the results with the commonly used typing techniques of pulsed-field gel electrophoresis and multilocus sequence typing. We designed primers to amplify a noncoding region adjacent to the pneumolysin gene. The PCR product was digested separately with six restriction endonucleases, and the DNA fragments were analyzed using an Agilent 2100 bioanalyzer for accurate sizing. The combined RFLP results for all enzymes allowed us to assign each of the 47 clinical isolates of S. pneumoniae tested to one of 33 RFLP types. RFLP analyzed using the bioanalyzer allowed discrimination between strains similar to that obtained by the more commonly used techniques of pulsed-field gel electrophoresis, which discriminated between 34 types, and multilocus sequence typing, which discriminated between 35 types, but more quickly and with less expense. RFLP of a noncoding region using the Agilent 2100 bioanalyzer could be a useful addition to the molecular typing techniques in current use for S. pneumoniae, especially as a first screen of a local population. PMID:17202282

  1. Wax deposition scale-up modeling for waxy crude production lines

    SciTech Connect

    Hsu, J.J.C.; Brubaker, J.P.

    1995-12-01

    A wax deposition scale-up model has been developed to scale-up laboratory wax deposition results for waxy crude production lines. The wax deposition model allows users to predict wax deposition profile along a cold pipeline and predict potential wax problems and pigging frequency. Consideration of the flow turbulence effect significantly increases prediction accuracy. Accurate wax deposition prediction should save capital and operation investments for waxy crude production systems. Many wax deposition models only apply a molecular diffusion mechanism in modeling and neglect shear effect. However, the flow turbulence effect has significant impact on wax deposition and can not be neglected in wax deposition modeling. Wax deposition scale-up parameters including shear rate, shear stress, and Reynolds number have been studied. None of these parameters can be used as a scaler. Critical wax tension concept has been proposed as a scaler. A technique to scale up shear effect and then wax deposition is described. For a given oil and oil temperature, the laboratory wax deposition data can be scaled up by heat flux and flow velocity. The scale-up techniques could be applied to multiphase flow conditions. Examples are presented in this paper to describe profiles of wax deposition and effective inside diameter along North Sea and West Africa subsea pipelines. The difference of wax deposition profiles from stock tank oil and live oil is also presented.

  2. Engineering Protocells: Prospects for Self-Assembly and Nanoscale Production-Lines

    PubMed Central

    Miller, David M.; Gulbis, Jacqueline M.

    2015-01-01

    The increasing ease of producing nucleic acids and proteins to specification offers potential for design and fabrication of artificial synthetic “organisms” with a myriad of possible capabilities. The prospects for these synthetic organisms are significant, with potential applications in diverse fields including synthesis of pharmaceuticals, sources of renewable fuel and environmental cleanup. Until now, artificial cell technology has been largely restricted to the modification and metabolic engineering of living unicellular organisms. This review discusses emerging possibilities for developing synthetic protocell “machines” assembled entirely from individual biological components. We describe a host of recent technological advances that could potentially be harnessed in design and construction of synthetic protocells, some of which have already been utilized toward these ends. More elaborate designs include options for building self-assembling machines by incorporating cellular transport and assembly machinery. We also discuss production in miniature, using microfluidic production lines. While there are still many unknowns in the design, engineering and optimization of protocells, current technologies are now tantalizingly close to the capabilities required to build the first prototype protocells with potential real-world applications. PMID:25815781

  3. Engineering protocells: prospects for self-assembly and nanoscale production-lines.

    PubMed

    Miller, David M; Gulbis, Jacqueline M

    2015-01-01

    The increasing ease of producing nucleic acids and proteins to specification offers potential for design and fabrication of artificial synthetic "organisms" with a myriad of possible capabilities. The prospects for these synthetic organisms are significant, with potential applications in diverse fields including synthesis of pharmaceuticals, sources of renewable fuel and environmental cleanup. Until now, artificial cell technology has been largely restricted to the modification and metabolic engineering of living unicellular organisms. This review discusses emerging possibilities for developing synthetic protocell "machines" assembled entirely from individual biological components. We describe a host of recent technological advances that could potentially be harnessed in design and construction of synthetic protocells, some of which have already been utilized toward these ends. More elaborate designs include options for building self-assembling machines by incorporating cellular transport and assembly machinery. We also discuss production in miniature, using microfluidic production lines. While there are still many unknowns in the design, engineering and optimization of protocells, current technologies are now tantalizingly close to the capabilities required to build the first prototype protocells with potential real-world applications. PMID:25815781

  4. Preparing your Offshore Organization for Agility: Experiences in India

    NASA Astrophysics Data System (ADS)

    Srinivasan, Jayakanth

    Two strategies that have significantly changed the way we conventionally think about managing software development and sustainment are the family of development approaches collectively referred to as agile methods, and the distribution of development efforts on a global scale. When you combine the two strategies, organizations have to address not only the technical challenges that arise from introducing new ways of working, but more importantly have to manage the 'soft' factors that if ignored lead to hard challenges. Using two case studies of distributed agile software development in India we illustrate the areas that organizations need to be aware of when transitioning work to India. The key issues that we emphasize are the need to recruit and retain personnel; the importance of teaching, mentoring and coaching; the need to manage customer expectations; the criticality of well-articulated senior leadership vision and commitment; and the reality of operating in a heterogeneous process environment.

  5. Agile Data Management with the Global Change Information System

    NASA Astrophysics Data System (ADS)

    Duggan, B.; Aulenbach, S.; Tilmes, C.; Goldstein, J.

    2013-12-01

    We describe experiences applying agile software development techniques to the realm of data management during the development of the Global Change Information System (GCIS), a web service and API for authoritative global change information under development by the US Global Change Research Program. Some of the challenges during system design and implementation have been : (1) balancing the need for a rigorous mechanism for ensuring information quality with the realities of large data sets whose contents are often in flux, (2) utilizing existing data to inform decisions about the scope and nature of new data, and (3) continuously incorporating new knowledge and concepts into a relational data model. The workflow for managing the content of the system has much in common with the development of the system itself. We examine various aspects of agile software development and discuss whether or how we have been able to use them for data curation as well as software development.

  6. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Weltevrede, Patrick; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Kramer, Michael; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory

    2009-10-01

    We request time to observe 160 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 2 Agile papers, 4 Fermi papers, 3 radio papers and authors on 3 papers in submission. The data are contributing to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group.

  7. ROADM architectures and technologies for agile optical networks

    NASA Astrophysics Data System (ADS)

    Eldada, Louay A.

    2007-02-01

    We review the different optoelectronic component and module technologies that have been developed for use in ROADM subsystems, and describe their principles of operation, designs, features, advantages, and challenges. We also describe the various needs for reconfigurable optical add/drop switching in agile optical networks. For each network need, we present the different ROADM subsystem architecture options with their pros and cons, and describe the optoelectronic technologies supporting each architecture.

  8. Sprint, agility, strength and endurance capacity in wheelchair basketball players

    PubMed Central

    Granados, C; Otero, M; Badiola, A; Olasagasti, J; Bidaurrazaga-Letona, I; Iturricastillo, A; Gil, SM

    2014-01-01

    The aims of the present study were, firstly, to determine the reliability and reproducibility of an agility T-test and Yo-Yo 10 m recovery test; and secondly, to analyse the physical characteristics measured by sprint, agility, strength and endurance field tests in wheelchair basketball (WB) players. 16 WB players (33.06 ± 7.36 years, 71.89 ± 21.71 kg and sitting body height 86.07 ± 6.82 cm) belonging to the national WB league participated in this study. Wheelchair sprint (5 and 20 m without ball, and 5 and 20 m with ball) agility (T-test and pick-up test) strength (handgrip and maximal pass) and endurance (Yo-Yo 10 m recovery test) were performed. T-test and Yo-Yo 10 m recovery test showed good reproducibility values (intraclass correlation coefficient, ICC = 0.74-0.94). The WB players’ results in 5 and 20 m sprints without a ball were 1.87 ± 0.21 s and 5.70 ± 0.43 s and with a ball 2.10 ± 0.30 s and 6.59 ± 0.61 s, being better than those reported in the literature. Regarding the pick-up test results (16.05 ± 0.52 s) and maximal pass (8.39 ± 1.77 m), players showed worse values than those obtained in elite players. The main contribution of the present study is the characterization of the physical performance profile of WB players using a field test battery. Furthermore, we demonstrated that the agility T-test and the aerobic Yo-Yo 10 m recovery test are reliable; consequently they may be appropriate instruments for measuring physical fitness in WB. PMID:25729153

  9. AGILE detection of a flare from PKS 1510-089

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Tavani, M.; Fioretti, V.; Gianotti, F.; Trifoglio, M.; Pittori, C.; Verrecchia, F.; Lucarelli, F.; Vercellone, S.; Piano, G.; Donnarumma, I.; Striani, E.; Cardillo, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Colafrancesco, S.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Pacciani, L.; Soffitta, P.; Costa, E.; Lapshov, I.; Rapisarda, M.; Argan, A.; Pucella, G.; Sabatini, S.; Trois, A.; Vittorini, V.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Di Cocco, G.; Pellizzoni, A.; Pilia, M.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Giommi, P.; Salotti, L.; Valentini, G.

    2014-08-01

    AGILE is now detecting transient gamma-ray emission above 100 MeV from a source positionally consistent with PKS 1510-089. Integrating from 2014-07-31 00:43 UT to 2014-08-02 02:15 UT, a preliminary maximum likelihood analysis yields a detection above 100 MeV positioned at Galactic coordinates (l,b) = (350.96, 40.12) +/- 0.9 (stat.) +/- 0.1 (syst.).

  10. AGILE Observations of the Gravitational-wave Event GW150914

    NASA Astrophysics Data System (ADS)

    Tavani, M.; Pittori, C.; Verrecchia, F.; Bulgarelli, A.; Giuliani, A.; Donnarumma, I.; Argan, A.; Trois, A.; Lucarelli, F.; Marisaldi, M.; Del Monte, E.; Evangelista, Y.; Fioretti, V.; Zoli, A.; Piano, G.; Munar-Adrover, P.; Antonelli, L. A.; Barbiellini, G.; Caraveo, P.; Cattaneo, P. W.; Costa, E.; Feroci, M.; Ferrari, A.; Longo, F.; Mereghetti, S.; Minervini, G.; Morselli, A.; Pacciani, L.; Pellizzoni, A.; Picozza, P.; Pilia, M.; Rappoldi, A.; Sabatini, S.; Vercellone, S.; Vittorini, V.; Giommi, P.; Colafrancesco, S.; Cardillo, M.; Galli, M.; Fuschino, F.

    2016-07-01

    We report the results of an extensive search through the AGILE data for a gamma-ray counterpart to the LIGO gravitational-wave (GW) event GW150914. Currently in spinning mode, AGILE has the potential of cover 80% of the sky with its gamma-ray instrument, more than 100 times a day. It turns out that AGILE came within a minute of the event time of observing the accessible GW150914 localization region. Interestingly, the gamma-ray detector exposed ∼65% of this region during the 100 s time intervals centered at ‑100 and +300 s from the event time. We determine a 2σ flux upper limit in the band 50 MeV–10 GeV, UL = 1.9 × 10‑8 erg cm‑2 s‑1, obtained ∼300 s after the event. The timing of this measurement is the fastest ever obtained for GW150914, and significantly constrains the electromagnetic emission of a possible high-energy counterpart. We also carried out a search for a gamma-ray precursor and delayed emission over five timescales ranging from minutes to days: in particular, we obtained an optimal exposure during the interval ‑150/‑30 s. In all these observations, we do not detect a significant signal associated with GW150914. We do not reveal the weak transient source reported by Fermi-GBM 0.4 s after the event time. However, even though a gamma-ray counterpart of the GW150914 event was not detected, the prospects for future AGILE observations of GW sources are decidedly promising.

  11. Agile Science Operations: A New Approach for Primitive Exploration Bodies

    NASA Technical Reports Server (NTRS)

    Chien, Steve A.; Thompson, David R.; Castillo-Rogez, Julie C.; Doyle, Richard; Estlin, Tara; Mclaren, David

    2012-01-01

    Primitive body exploration missions such as potential Comet Surface Sample Return or Trojan Tour and Rendezvous would challenge traditional operations practices. Earth-based observations would provide only basic understanding before arrival and many science goals would be defined during the initial rendezvous. It could be necessary to revise trajectories and observation plans to quickly characterize the target for safe, effective observations. Detection of outgassing activity and monitoring of comet surface activity are even more time constrained, with events occurring faster than round-trip light time. "Agile science operations" address these challenges with contingency plans that recognize the intrinsic uncertainty in the operating environment and science objectives. Planning for multiple alternatives can significantly improve the time required to repair and validate spacecraft command sequences. When appropriate, time-critical decisions can be automated and shifted to the spacecraft for immediate access to instrument data. Mirrored planning systems on both sides of the light-time gap permit transfer of authority back and forth as needed. We survey relevant science objectives, identifying time bottlenecks and the techniques that could be used to speed missions' reaction to new science data. Finally, we discuss the results of a trade study simulating agile observations during flyby and comet rendezvous scenarios. These experiments quantify instrument coverage of key surface features as a function of planning turnaround time. Careful application of agile operations techniques can play a significant role in realizing the Decadal Survey plan for primitive body exploration

  12. An agile mask data preparation and writer dispatching approach

    NASA Astrophysics Data System (ADS)

    Hsu, Chih-tung; Chen, Y. S.; Hsin, S. C.; Tuo, Laurent C.; Schulze, Steffen F.

    2004-08-01

    An agile mask data preparation (MDP) approach is proposed to cut re-fracture cycle time as incurred by mask writer dispatching policy changes. Shorter re-fracture cycle time increases the flexibility of mask writer dispatching, as a result, mask writer's capacity can be utilized to its optimum. Preliminary results demonstrate promising benefits in MDP cycle time reduction and writer dispatching flexibility improvement. The agile MDP can save up to 40% of re-fracture cycle time. OASIS (Open Artwork System Interchange Standard) was proposed to address the GDSII file size explosion problem. However, OASIS has yet to gain wide acceptance in the mask industry. The authors envision OASIS adoption by the mask industry as a three-phase process and identify key issues of each phase from the mask manufacturer's perspective. As a long-term MDP flow reengineering project, an agile MDP and writer dispatching approach based on OASIS is proposed. The paper describes the results of an extensive evaluation on OASIS performance compared to that of GDSII, both original GDSII and post-OPC GDSII files. The file size of eighty percent of the original GDSII files is more than ten times larger compared to that of its OASIS counterpart.

  13. Observing peculiar γ-ray pulsars with AGILE

    NASA Astrophysics Data System (ADS)

    Pilia, M.; Pellizzoni, A.

    2011-08-01

    The AGILE γ-ray satellite provides large sky exposure levels (>=109 cm2 s per year on the Galactic Plane) with sensitivity peaking at E ~100 MeV where the bulk of pulsar energy output is typically released. Its ~1 μs absolute time tagging capability makes it perfectly suited for the study of γ-ray pulsars. AGILE collected a large number of γ-ray photons from EGRET pulsars (>=40,000 pulsed counts for Vela) in two years of observations unveiling new interesting features at sub-millisecond level in the pulsars' high-energy light-curves, γ-ray emission from pulsar glitches and Pulsar Wind Nebulae. AGILE detected about 20 nearby and energetic pulsars with good confidence through timing and/or spatial analysis. Among the newcomers we find pulsars with very high rotational energy losses, such as the remarkable PSR B1509-58 with a magnetic field in excess of 1013 Gauss, and PSR J2229+6114 providing a reliable identification for the previously unidentified EGRET source 3EG2227+6122. Moreover, the powerful millisecond pulsar B1821-24, in the globular cluster M28, is detected during a fraction of the observations.

  14. Effect of fence height on joint angles of agility dogs.

    PubMed

    Birch, Emily; Leśniak, Kirsty

    2013-12-01

    The Kennel Club (KC) and United Kingdom Agility (UKA) govern major dog agility competitions in the UK. Dogs are categorised into different jump heights depending on their height at the withers, with fence heights ranging from 300 to 650 mm for both organisations. Dogs fall into one of three height categories when competing under KC rules and one of four height categories under UKA rules. The aim of this study was to investigate the influence of an additional height category for agility dogs measuring over 430 mm at the withers. Jump heights were selected that related to the percentage of body height that dogs of 430 mm (7% lower) and 431 mm (51% higher) height at the withers would be encouraged to jump under UKA regulations without the addition of their fourth ('standard height') category. Joint angles were determined from anatomical markers placed on the forelimb and hind limb joints, and at six points along the vertebral column. As fence height increased, flexion of the scapulohumeral joint increased significantly for both the take-off and bascule (arc) phases of the jump. The increase in flexion as a consequence of the increase in fence height is likely to result in intensified stretching of the biceps brachii and supraspinatus muscles. In addition, increasing fence high resulted in an increase in the sacroiliac joint angle during take-off. PMID:24360736

  15. Growth, productivity and protein glycosylation in a CHO EpoFc producer cell line adapted to glutamine-free growth.

    PubMed

    Taschwer, Michael; Hackl, Matthias; Hernández Bort, Juan A; Leitner, Christian; Kumar, Niraj; Puc, Urszula; Grass, Josephine; Papst, Martin; Kunert, Renate; Altmann, Friedrich; Borth, Nicole

    2012-01-20

    A primary objective of cell line development and process optimisation in animal cell culture is the improvement of culture performance as indicated by desirable properties such as high cell concentration, viability, productivity and product quality. The inefficient energy metabolism of mammalian cells in culture is still a major limiting factor for improvements in process performance. It results in high uptake rates of glucose and glutamine and the concomitant accumulation of waste products which in turn limits final cell concentrations and growth. To avoid these negative side effects, a CHO host cell line was established recently which is able to grow in completely glutamine free medium (Hernandez Bort et al., 2010). To determine the influence of this adaptation on productivity and product quality, the same procedure was repeated with a recombinant CHO cell line producing an erythropoietin-Fc fusion protein (CHO-EpoFc) for this publication. After adaptation to higher cell densities and glutamine free medium, culture performance was monitored in batch bioprocesses and revealed comparable growth properties and EpoFc product formation in both cell lines. The level of reactive oxygen species was elevated in the adapted cells, reflecting a higher level of oxidative stress, however, at the same time the level of the oxido-protective glutathione was also higher, so that cells seem adequately protected against cellular damage. Analysis of nucleotides and nucleotide sugars revealed elevated UDP-sugars in cells grown in the absence of glutamine. Furthermore, the antennarity of N-glycans was moderately higher on the Epo part of the protein produced by the adapted cell line compared to the parental cell line. Except for this, the glycosylation, with respect to site occupancy, degree of sialylation and glycoform structure, was highly comparable, both for the Epo and the Fc part of the protein. PMID:22178781

  16. Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

    NASA Technical Reports Server (NTRS)

    Wetherholt, Martha

    2016-01-01

    To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

  17. Towards a Framework for Using Agile Approaches in Global Software Development

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Ali Babar, Muhammad; Verner, June

    As agile methods and Global Software Development (GSD) are become increasingly popular, GSD project managers have been exploring the viability of using agile approaches in their development environments. Despite the expected benefits of using an agile approach with a GSD project, the overall combining mechanisms of the two approaches are not clearly understood. To address this challenge, we propose a conceptual framework, based on the research literature. This framework is expected to aid a project manager in deciding what agile strategies are effective for a particular GSD project, taking into account project context. We use an industry-based case study to explore the components of our conceptual framework. Our case study is planned and conducted according to specific published case study guidelines. We identify the agile practices and agile supporting practices used by a GSD project manager in our case study and conclude with future research directions.

  18. High-Speed Time-Series CCD Photometry with Agile

    NASA Astrophysics Data System (ADS)

    Mukadam, Anjum S.; Owen, R.; Mannery, E.; MacDonald, N.; Williams, B.; Stauffer, F.; Miller, C.

    2011-12-01

    We have assembled a high-speed time-series CCD photometer named Agile for the 3.5 m telescope at Apache Point Observatory, based on the design of a photometer called Argos at McDonald Observatory. Instead of a mechanical shutter, we use the frame-transfer operation of the CCD to end an exposure and initiate the subsequent new exposure. The frame-transfer operation is triggered by the negative edge of a GPS pulse; the instrument timing is controlled directly by hardware, without any software intervention or delays. This is the central pillar in the design of Argos that we have also used in Agile; this feature makes the accuracy of instrument timing better than a millisecond. Agile is based on a Princeton Instruments Acton VersArray camera with a frame-transfer CCD, which has 1K × 1K active pixels, each of size 13 μm × 13 μm. Using a focal reducer at the Nasmyth focus of the 3.5 m telescope at Apache Point Observatory, we yield a field of view of 2.2 × 2.2 arcmin2 with an unbinned plate scale of 0.13'' pixel-1. The CCD is back-illuminated and thinned for improved blue sensitivity and provides a quantum efficiency >=80% in the wavelength range of 4500-7500 Å. The unbinned full-frame readout time can be as fast as 1.1 s this is achieved using a low-noise amplifier operating at 1 MHz with an average read noise of the order of 6.6 e rms. At the slow read rate of 100 kHz to be used for exposure times longer than a few seconds, we determine an average read noise of the order of 3.7 e rms. Agile is optimized to observe variability at short timescales from one-third of a second to several hundred seconds. The variable astronomical sources routinely observed with Agile include pulsating white dwarfs, cataclysmic variables, flare stars, planetary transits, and planetary satellite occultations.

  19. A Software Product Line Process to Develop Agents for the IoT.

    PubMed

    Ayala, Inmaculada; Amor, Mercedes; Fuentes, Lidia; Troya, José M

    2015-01-01

    One of the most important challenges of this decade is the Internet of Things (IoT), which aims to enable things to be connected anytime, anyplace, with anything and anyone, ideally using any path/network and any service. IoT systems are usually composed of heterogeneous and interconnected lightweight devices that support applications that are subject to change in their external environment and in the functioning of these devices. The management of the variability of these changes, autonomously, is a challenge in the development of these systems. Agents are a good option for developing self-managed IoT systems due to their distributed nature, context-awareness and self-adaptation. Our goal is to enhance the development of IoT applications using agents and software product lines (SPL). Specifically, we propose to use Self-StarMASMAS, multi-agent system) agents and to define an SPL process using the Common Variability Language. In this contribution, we propose an SPL process for Self-StarMAS, paying particular attention to agents embedded in sensor motes. PMID:26140350

  20. A Software Product Line Process to Develop Agents for the IoT

    PubMed Central

    Ayala, Inmaculada; Amor, Mercedes; Fuentes, Lidia; Troya, José M.

    2015-01-01

    One of the most important challenges of this decade is the Internet of Things (IoT), which aims to enable things to be connected anytime, anyplace, with anything and anyone, ideally using any path/network and any service. IoT systems are usually composed of heterogeneous and interconnected lightweight devices that support applications that are subject to change in their external environment and in the functioning of these devices. The management of the variability of these changes, autonomously, is a challenge in the development of these systems. Agents are a good option for developing self-managed IoT systems due to their distributed nature, context-awareness and self-adaptation. Our goal is to enhance the development of IoT applications using agents and software product lines (SPL). Specifically, we propose to use Self-StarMASMAS, multi-agent system) agents and to define an SPL process using the Common Variability Language. In this contribution, we propose an SPL process for Self-StarMAS, paying particular attention to agents embedded in sensor motes. PMID:26140350

  1. Continuous on-line steam quality monitoring system of the Bacman Geothermal Production Field, Philippines

    SciTech Connect

    Solis, R.P.; Chavez, F.C.; Garcia, S.E.

    1997-12-31

    In any operating geothermal power plant, steam quality is one of the most important parameters being monitored. In the Bacon-Manito Geothermal Production Field (BGPF), an online steam quality monitoring system have been installed in two operating power plants which provides an accurate, efficient and continuous real-time data which is more responsive to the various requirements of the field operation. The system utilizes sodium as an indicator of steam purity. Sodium concentration is read by the flame photometer located at the interface after aspirating a sample of the condensed steam through a continuous condensate sampler. The condensate has been degassed through a condensate-NCG separator. The flame photometer analog signal is then converted by a voltage-to-current converter/transmitter and relayed to the processor which is located at the control center through electrical cable to give a digital sodium concentration read-out at the control panel. The system features a high and high-high sodium level alarm, a continuous strip-chart recorder and a central computer for data capture, retrieval, and processing for further interpretation. Safety devices, such as the flame-off indicator at the control center and the automatic fuel cut-off device along the fuel line, are incorporated in the system.

  2. Relationship Between Reactive Agility and Change of Direction Speed in Amateur Soccer Players.

    PubMed

    Matlák, János; Tihanyi, József; Rácz, Levente

    2016-06-01

    Matlák, J, Tihanyi, J, and Rácz, L. Relationship between reactive agility and change of direction speed in amateur soccer players. J Strength Cond Res 30(6): 1547-1552, 2016-The aim of the study was to assess the relationship between reactive agility and change of direction speed (CODS) among amateur soccer players using running tests with four directional changes. Sixteen amateur soccer players (24.1 ± 3.3 years; 72.4 ± 7.3 kg; 178.7 ± 6 cm) completed CODS and reactive agility tests with four changes of direction using the SpeedCourt™ system (Globalspeed GmbH, Hemsbach, Germany). Countermovement jump (CMJ) height and maximal foot tapping count (completed in 3 seconds) were also measured with the same device. In the reactive agility test, participants had to react to a series of light stimuli projected onto a screen. Total time was shorter in the CODS test than in the reactive agility test (p < 0.001). Nonsignificant correlations were found among variables measured in the CODS, reactive agility, and CMJ tests. Low common variance (r = 0.03-0.18) was found between CODS and reactive agility test variables. The results of this study underscore the importance of cognitive factors in reactive agility performance and suggest that specific methods may be required for training and testing reactive agility and CODS. PMID:26562713

  3. Team-based work and work system balance in the context of agile manufacturing.

    PubMed

    Yauch, Charlene A

    2007-01-01

    Manufacturing agility is the ability to prosper in an environment characterized by constant and unpredictable change. The purpose of this paper is to analyze team attributes necessary to facilitate agile manufacturing, and using Balance Theory as a framework, it evaluates the potential positive and negative impacts related to these team attributes that could alter the balance of work system elements and resulting "stress load" experienced by persons working on agile teams. Teams operating within the context of agile manufacturing are characterized as multifunctional, dynamic, cooperative, and virtual. A review of the literature relevant to each of these attributes is provided, as well as suggestions for future research. PMID:16631101

  4. Water consumption and biomass production of protoplast fusion lines of poplar hybrids under drought stress.

    PubMed

    Hennig, Anne; Kleinschmit, Jörg R G; Schoneberg, Sebastian; Löffler, Sonja; Janßen, Alwin; Polle, Andrea

    2015-01-01

    Woody crops such as poplars (Populus) can contribute to meet the increasing energy demand of a growing human population and can therefore enhance the security of energy supply. Using energy from biomass increases ecological sustainability as biomass is considered to play a pivotal role in abating climate change. Because areas for establishing poplar plantations are often confined to marginal sites drought tolerance is one important trait for poplar genotypes cultivated in short rotation coppice. We tested 9-month-old plants of four tetraploid Populus tremula (L.) × P. tremuloides (Michx.) lines that were generated by protoplast fusion and their diploid counterpart for water consumption and drought stress responses in a greenhouse experiment. The fusion lines showed equivalent or decreased height growth, stem biomass and total leaf area compared to the diploid line. The relative height increment of the fusion lines was not reduced compared to the diploid line when the plants were exposed to drought. The fusion lines were distinguished from the diploid counterpart by stomatal characteristics such as increased size and lower density. The changes in the stomatal apparatus did not affect the stomatal conductance. When exposed to drought the carbohydrate concentrations increased more strongly in the fusion lines than in the diploid line. Two fusion lines consumed significantly less water with regard to height growth, producing equivalent or increased relative stem biomass under drought compared to their diploid relative. Therefore, these tetraploid fusion lines are interesting candidates for short rotation biomass plantation on dry sites. PMID:26042130

  5. Water consumption and biomass production of protoplast fusion lines of poplar hybrids under drought stress

    PubMed Central

    Hennig, Anne; Kleinschmit, Jörg R. G.; Schoneberg, Sebastian; Löffler, Sonja; Janßen, Alwin; Polle, Andrea

    2015-01-01

    Woody crops such as poplars (Populus) can contribute to meet the increasing energy demand of a growing human population and can therefore enhance the security of energy supply. Using energy from biomass increases ecological sustainability as biomass is considered to play a pivotal role in abating climate change. Because areas for establishing poplar plantations are often confined to marginal sites drought tolerance is one important trait for poplar genotypes cultivated in short rotation coppice. We tested 9-month-old plants of four tetraploid Populus tremula (L.) × P. tremuloides (Michx.) lines that were generated by protoplast fusion and their diploid counterpart for water consumption and drought stress responses in a greenhouse experiment. The fusion lines showed equivalent or decreased height growth, stem biomass and total leaf area compared to the diploid line. The relative height increment of the fusion lines was not reduced compared to the diploid line when the plants were exposed to drought. The fusion lines were distinguished from the diploid counterpart by stomatal characteristics such as increased size and lower density. The changes in the stomatal apparatus did not affect the stomatal conductance. When exposed to drought the carbohydrate concentrations increased more strongly in the fusion lines than in the diploid line. Two fusion lines consumed significantly less water with regard to height growth, producing equivalent or increased relative stem biomass under drought compared to their diploid relative. Therefore, these tetraploid fusion lines are interesting candidates for short rotation biomass plantation on dry sites. PMID:26042130

  6. Enabler for the agile virtual enterprise

    NASA Astrophysics Data System (ADS)

    Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

    2001-10-01

    In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

  7. Production of proinflammatory mediators by indoor air bacteria and fungal spores in mouse and human cell lines.

    PubMed Central

    Huttunen, Kati; Hyvärinen, Anne; Nevalainen, Aino; Komulainen, Hannu; Hirvonen, Maija-Riitta

    2003-01-01

    We compared the inflammatory and cytotoxic responses caused by household mold and bacteria in human and mouse cell lines. We studied the fungi Aspergillus versicolor, Penicillium spinulosum, and Stachybotrys chartarum and the bacteria Bacillus cereus, Pseudomonas fluorescens, and Streptomyces californicus for their cytotoxicity and ability to stimulate the production of inflammatory mediators in mouse RAW264.7 and human 28SC macrophage cell lines and in the human A549 lung epithelial cell line in 24-hr exposure to 10(5), 10(6), and 10(7) microbes/mL. We studied time dependency by terminating the exposure to 10(6) microbes/mL after 3, 6, 12, 24, and 48 hr. We analyzed production of the cytokines tumor necrosis factor-alpha and interleukins 6 and 1ss (TNF-alpha, IL-6, IL-1ss, respectively) and measured nitric oxide production using the Griess method, expression of inducible NO-synthase with Western Blot analysis, and cytotoxicity with the MTT-test. All bacteria strongly induced the production of TNF-alpha, IL-6 and, to a lesser extent, the formation of IL-1ss in mouse macrophages. Only the spores of Str. californicus induced the production of NO and IL-6 in both human and mouse cells. In contrast, exposure to fungal strains did not markedly increase the production of NO or any cytokine in the studied cell lines except for Sta. chartarum, which increased IL-6 production somewhat in human lung epithelial cells. These microbes were less cytotoxic to human cells than to mouse cells. On the basis of equivalent numbers of bacteria and spores of fungi added to cell cultures, the overall potency to stimulate the production of proinflammatory mediators decreased in the order Ps. fluorescens > Str. californicus > B. cereus > Sta. chartarum > A. versicolor > P. spinulosum. These data suggest that bacteria in water-damaged buildings should also be considered as causative agents of adverse inflammatory effects. PMID:12515684

  8. Agility in adversity: Vaccines on Demand.

    PubMed

    De Groot, Anne S; Moise, Leonard; Olive, David; Einck, Leo; Martin, William

    2016-09-01

    Is the US ready for a biological attack using Ebola virus or Anthrax? Will vaccine developers be able to produce a Zika virus vaccine, before the epidemic spreads around the world? A recent report by The Blue Ribbon Study Panel on Biodefense argues that the US is not ready for these challenges, however, technologies and capabilities that could address these deficiencies are within reach. Vaccine technologies have advanced and readiness has improved in recent years, due to advances in sequencing technology and computational power making the 'vaccines on demand' concept a reality. Building a robust strategy to design effective biodefense vaccines from genome sequences harvested by real-time biosurveillance will benefit from technologies that are being brought to bear on the cancer cure 'moonshot'. When combined with flexible vaccine production platforms, vaccines on demand will relegate expensive and, in some cases, insufficiently effective vaccine stockpiles to the dust heap of history. PMID:27389971

  9. Experimental and In Silico Modelling Analyses of the Gene Expression Pathway for Recombinant Antibody and By-Product Production in NS0 Cell Lines

    PubMed Central

    Mead, Emma J.; Chiverton, Lesley M.; Spurgeon, Sarah K.; Martin, Elaine B.; Montague, Gary A.; Smales, C. Mark; von der Haar, Tobias

    2012-01-01

    Monoclonal antibodies are commercially important, high value biotherapeutic drugs used in the treatment of a variety of diseases. These complex molecules consist of two heavy chain and two light chain polypeptides covalently linked by disulphide bonds. They are usually expressed as recombinant proteins from cultured mammalian cells, which are capable of correctly modifying, folding and assembling the polypeptide chains into the native quaternary structure. Such recombinant cell lines often vary in the amounts of product produced and in the heterogeneity of the secreted products. The biological mechanisms of this variation are not fully defined. Here we have utilised experimental and modelling strategies to characterise and define the biology underpinning product heterogeneity in cell lines exhibiting varying antibody expression levels, and then experimentally validated these models. In undertaking these studies we applied and validated biochemical (rate-constant based) and engineering (nonlinear) models of antibody expression to experimental data from four NS0 cell lines with different IgG4 secretion rates. The models predict that export of the full antibody and its fragments are intrinsically linked, and cannot therefore be manipulated individually at the level of the secretory machinery. Instead, the models highlight strategies for the manipulation at the precursor species level to increase recombinant protein yields in both high and low producing cell lines. The models also highlight cell line specific limitations in the antibody expression pathway. PMID:23071804

  10. Experimental and in silico modelling analyses of the gene expression pathway for recombinant antibody and by-product production in NS0 cell lines.

    PubMed

    Mead, Emma J; Chiverton, Lesley M; Spurgeon, Sarah K; Martin, Elaine B; Montague, Gary A; Smales, C Mark; von der Haar, Tobias

    2012-01-01

    Monoclonal antibodies are commercially important, high value biotherapeutic drugs used in the treatment of a variety of diseases. These complex molecules consist of two heavy chain and two light chain polypeptides covalently linked by disulphide bonds. They are usually expressed as recombinant proteins from cultured mammalian cells, which are capable of correctly modifying, folding and assembling the polypeptide chains into the native quaternary structure. Such recombinant cell lines often vary in the amounts of product produced and in the heterogeneity of the secreted products. The biological mechanisms of this variation are not fully defined. Here we have utilised experimental and modelling strategies to characterise and define the biology underpinning product heterogeneity in cell lines exhibiting varying antibody expression levels, and then experimentally validated these models. In undertaking these studies we applied and validated biochemical (rate-constant based) and engineering (nonlinear) models of antibody expression to experimental data from four NS0 cell lines with different IgG4 secretion rates. The models predict that export of the full antibody and its fragments are intrinsically linked, and cannot therefore be manipulated individually at the level of the secretory machinery. Instead, the models highlight strategies for the manipulation at the precursor species level to increase recombinant protein yields in both high and low producing cell lines. The models also highlight cell line specific limitations in the antibody expression pathway. PMID:23071804

  11. The frequency-agile radar: A multifunctional approach to remote sensing of the ionosphere

    NASA Astrophysics Data System (ADS)

    Tsunoda, R. T.; Livingston, R. C.; Buonocore, J. J.; McKinley, A. V.

    1995-09-01

    We introduce a new kind of diagnostic sensor that combines multifunctional measurement capabilities for ionospheric research. Multifunctionality is realized through agility in frequency selection over an extended band (1.5 to 50 MHz), system modularity, complete system control by software written in C, and a user-friendly computer interface. This sensor, which we call the frequency-agile radar (FAR), incorporates dual radar channels and an arbitrary waveform synthesizer that allows creative design of sophisticated waveforms as a means of increasing its sensitivity to weak signals while minimizing loss in radar resolution. The sensitivity of the FAR is determined by two sets of power amplifier modules: four 4-kW solid-state broadband amplifiers, and four 30-kW vacuum tube amplifiers. FAR control is by an AT-bus personal computer with on-line processing by a programmable array processor. The FAR does not simply house the separate functions of most radio sensors in use today, it provides convenient and flexible access to those functions as elements to be used in any combination. Some of the first new results obtained with the FAR during recent field campaigns are presented to illustrate its versatility. These include (1) the first detection of anomalous high-frequency (HF) reflections from a barium ion cloud, (2) the first evidence of unexpectedly large drifts and a shear north of the equatorial electrojet, (3) the first HF radar signature of a developing equatorial plasma bubble, and (4) the first measurements by a portable radar of altitude-extended, quasi-periodic backscatter from midlatitude sporadic E. We also mention the potential of the FAR for atmospheric remote sensing.

  12. Micro-milling process improvement using an agile pulse-shaping fiber laser

    NASA Astrophysics Data System (ADS)

    Gay, David; Cournoyer, Alain; Deladurantaye, Pascal; Briand, Martin; Roy, Vincent; Labranche, Bruno; Levesque, Marc; Taillon, Y.

    2009-06-01

    We demonstrate the usefulness of INO's pulse-shaping fiber laser platform to rapidly develop complex laser micromachining processes. The versatility of such laser sources allows for straightforward control of the emitting energy envelop on the nanosecond timescale to create multi-amplitude level pulses and/or multi-pulse regimes. The pulses are amplified in an amplifier chain in a MOPA configuration that delivers output energy per pulse up to 60 μJ at 1064 nm at a repetition rate of 200 kHz with excellent beam quality (M2 < 1.1) and narrow line widths suitable for efficient frequency conversion. Also, their pulse-on-demand and pulse-to-pulse shape selection capability at high repetition rates makes those agile laser sources suitable for the implementation of high-throughput complex laser processing. Micro-milling experiments were carried out on two metals, aluminum and stainless steel, having very different thermal properties. For aluminum, our results show that the material removal efficiency depends strongly on the pulse shape, especially near the ablation threshold, and can be maximized to develop efficient laser micro-milling processes. But, the material removal efficiency is not always correlated with a good surface quality. However, the roughness of the milled surface can be improved by removing a few layers of material using another type of pulse shape. The agility of INO's fiber laser enables the implementation of a fast laser process including two steps employing different pulse characteristics for maximizing the material removal rate and obtaining a good surface quality at the same time. A comparison of material removal efficiency with stainless steel, well known to be difficult to mill on the micron scale, is also presented.

  13. 78 FR 65274 - Certain Lined Paper Products From the People's Republic of China: Notice of Final Results and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-31

    ... Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949... Results and Rescission in Part of Antidumping Duty Administrative Review; 2011-2012, 78 FR 34640 (June 10... Administrative Review, 76 FR 62343 (October 7, 2011) at footnote 3 for the latest update of the HTS numbers...

  14. 76 FR 60803 - Certain Lined Paper Products From People's Republic of China: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-30

    ... Review, and Intent to Revoke Order in Part, 76 FR 50998 (August 17, 2011) (``Intent to Revoke''). DATES...; and Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR... or glued note paper, with papers that are printed with infrared reflective inks and readable only...

  15. 40 CFR 1045.325 - What happens if an engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What happens if an engine family fails the production-line testing requirements? 1045.325 Section 1045.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM...

  16. 40 CFR 1045.320 - What happens if one of my production-line engines fails to meet emission standards?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false What happens if one of my production-line engines fails to meet emission standards? 1045.320 Section 1045.320 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM...

  17. 40 CFR 1045.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I know when my engine family fails the production-line testing requirements? 1045.315 Section 1045.315 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM...

  18. 75 FR 27706 - Certain Lined Paper Products from India and People's Republic of China: Extension of Time Limits...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-18

    ... Antidumping and Countervailing Duty Administrative Reviews and Request for Revocation in Part, 74 FR 54956... International Trade Administration Certain Lined Paper Products from India and People's Republic of China: Extension of Time Limits for the Preliminary Results of Antidumping Duty Administrative Reviews...

  19. Sustainable production of bioenergy and bio-char from the straw of high biomass soybean lines via fast pyrolysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The straws of two high-biomass soybean lines developed at ARS for bioenergy were subjected to thermochemical conversion by fast pyrolysis. The objective was to evaluate the potential use of the straw for the production of liquid fuel intermediates that can be burned “as is” and/or potentially upgra...

  20. 76 FR 30908 - Certain Lined Paper Products From India: Extension of Time Limit for the Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-27

    ..., or Suspended Investigation; Opportunity To Request Administrative Review, 75 FR 53635, (September 1... Duty Administrative Reviews, 75 FR 66349 (October 28, 2010). The preliminary results of review are... International Trade Administration Certain Lined Paper Products From India: Extension of Time Limit for...

  1. 40 CFR 1054.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... results for each engine. If you do several tests on an engine, calculate the initial results for each test... this section (see § 1054.315(a)). (d) After each new test, recalculate the CumSum statistic. (e) If you... § 1054.320 for the requirements that apply to individual engines that fail a production-line test....

  2. 40 CFR 1045.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... results for each engine. If you do several tests on an engine, calculate the initial results for each test... this section (see § 1045.315(a)). (d) After each new test, recalculate the CumSum statistic. (e) If you... § 1045.320 for the requirements that apply to individual engines that fail a production-line test....

  3. 40 CFR 1051.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... results for each vehicle or engine. If you do several tests on a vehicle or engine, calculate the initial... new test, recalculate the CumSum statistic. (e) If you test more than the required number of vehicles....320 for the requirements that apply to individual vehicles or engines that fail a production-line...

  4. 40 CFR 1048.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I know when my engine family... SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.315 How do I know when my engine family... each engine. If you do several tests on an engine, calculate the initial results for each test,...

  5. 40 CFR 1051.315 - How do I know when my engine family fails the production-line testing requirements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I know when my engine family... ENGINES AND VEHICLES Testing Production-Line Vehicles and Engines § 1051.315 How do I know when my engine... results for each vehicle or engine. If you do several tests on a vehicle or engine, calculate the...

  6. Production and On-Line Comprehension of Definiteness in English and Dutch by Monolingual and Sequential Bilingual Children

    ERIC Educational Resources Information Center

    Chondrogianni, Vasiliki; Vasic, Nada; Marinis, Theodoros; Blom, Elma

    2015-01-01

    The present article examines production and on-line processing of definite articles in Turkish-speaking sequential bilingual children acquiring English and Dutch as second languages (L2) in the UK and in the Netherlands, respectively. Thirty-nine 6-8-year-old L2 children and 48 monolingual (L1) age-matched children participated in two separate…

  7. Flexible Conveyance Control System for Agile Manufacturing

    NASA Astrophysics Data System (ADS)

    Uchiyama, Kazuhisa; Uchimura, Keiichi; Yoshikawa, Takeru; Shishino, Satoru; Hu, Zhencheng

    The control of conveyance between processes still relies on the engineer's experience. It is difficult to correspond to the change in the conveyance layout due to the expansion and reduction of production and the breakdown of conveyance devices. In this paper, we propose a conveyance control system that can adapt to changes in the conveyance layout and we aim at the improvement of the amount of total conveyance. First of all, the system is divided into the part where the conveyance layout is made a data base and the part where the conveyance control that uses the congestion index is done. Therefore, it is possible to deal flexibly by changing the data base part without changing the conveyance control part when it is necessary to change the conveyance layout suddenly. In all the combinations of the conveyance layout and the turning on pattern used as a result of the simulation, the proposed conveyance control method became a great result by the amount of total conveyance.

  8. Evaluation of public sweet sorghum A-lines for use in hybrid production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A fundamental need for commercialization of sweet sorghum [Sorghum bicolor (L.) Moench] as a bioenergy crop is an adequate seed supply, which will require development of hybrid varieties using dwarf seed-parent lines. A set of 6 public sweet sorghum A-lines (Dwarf Kansas Sourless, KS9, N36, N38, N39...

  9. Relationships Between Reactive Agility Movement Time and Unilateral Vertical, Horizontal, and Lateral Jumps.

    PubMed

    Henry, Greg J; Dawson, Brian; Lay, Brendan S; Young, Warren B

    2016-09-01

    Henry, GJ, Dawson, B, Lay, BS, and Young, WB. Relationships between reactive agility movement time and unilateral vertical, horizontal, and lateral jumps. J Strength Cond Res 30(9): 2514-2521, 2016-This study compared reactive agility movement time and unilateral (vertical, horizontal, and lateral) jump performance and kinetics between dominant and nondominant legs in Australian rules footballers (n = 31) to investigate the role of leg strength characteristics in reactive agility performance. Jumps involved jumping forward on 1 leg, then for maximum height or horizontal or lateral distance. Agility and movement time components of reactive agility were assessed using a video-based test. Correlations between each of the jumps were strong (r = -0.62 to -0.77), but between the jumps and agility movement time the relationships were weak (r = -0.25 to -0.33). Dominant leg performance was superior in reactive agility movement time (4.5%; p = 0.04), lateral jump distance (3%; p = 0.008), and lateral reactive strength index (4.4%; p = 0.03) compared with the nondominant leg. However, when the subjects were divided into faster and slower performers (based on their agility movement times) the movement time was significantly quicker in the faster group (n = 15; 12%; p < 0.001), but no differences in jump performance or kinetics were observed. Therefore, although the capacity for jumps to predict agility performance seems limited, factors involved in producing superior lateral jump performance in the dominant leg may also be associated with advantages in agility performance in that leg. However, because reactive strength as measured by unilateral jumps seems to play a limited role in reactive agility performance and other factors such as skill, balance, and coordination, and also cognitive and decision-making factors, are likely to be more important. PMID:23820562

  10. SU-E-T-610: Comparison of Treatment Times Between the MLCi and Agility Multileaf Collimators

    SciTech Connect

    Ramsey, C; Bowling, J

    2014-06-01

    Purpose: The Agility is a new 160-leaf MLC developed by Elekta for use in their Infinity and Versa HD linacs. As compared to the MLCi, the Agility increased the maximum leaf speed from 2 cm/s to 3.5 cm/s, and the maximum primary collimator speed from 1.5 cm/s to 9.0 cm/s. The purpose of this study was to determine if the Agility MLC resulted in improved plan quality and/or shorter treatment times. Methods: An Elekta Infinity that was originally equipped with a 80 leaf MLCi was upgraded to an 160 leaf Agility. Treatment plan quality was evaluated using the Pinnacle planning system with SmartArc. Optimization was performed once for the MLCi and once for the Agility beam models using the same optimization parameters and the same number of iterations. Patient treatment times were measured for all IMRT, VMAT, and SBRT patients treated on the Infinity with the MLCi and Agility MLCs. Treatment times were extracted from the EMR and measured from when the patient first walked into the treatment room until exiting the treatment room. Results: 11,380 delivery times were measured for patients treated with the MLCi, and 1,827 measurements have been made for the Agility MLC. The average treatment times were 19.1 minutes for the MLCi and 20.8 minutes for the Agility. Using a t-test analysis, there was no difference between the two groups (t = 0.22). The dose differences between patients planned with the MLCi and the Agility MLC were minimal. For example, the dose difference for the PTV, GTV, and cord for a head and neck patient planned using Pinnacle were effectively equivalent. However, the dose to the parotid glands was slightly worse with the Agility MLC. Conclusion: There was no statistical difference in treatment time, or any significant dosimetric difference between the Agility MLC and the MLCi.

  11. Evaluation of the Agronomic Performance of Atrazine-Tolerant Transgenic japonica Rice Parental Lines for Utilization in Hybrid Seed Production

    PubMed Central

    Li, Yanlan; Li, Yanan; Wang, Shengjun; Su, Jinping; Liu, Xuejun; Chen, Defu; Chen, Xiwen

    2014-01-01

    Currently, the purity of hybrid seed is a crucial limiting factor when developing hybrid japonica rice (Oryza sativa L.). To chemically control hybrid seed purity, we transferred an improved atrazine chlorohydrolase gene (atzA) from Pseudomonas ADP into hybrid japonica parental lines (two maintainers, one restorer), and Nipponbare, by using Agrobacterium-mediated transformation. We subsequently selected several transgenic lines from each genotype by using PCR, RT-PCR, and germination analysis. In the presence of the investigated atrazine concentrations, particularly 150 µM atrazine, almost all of the transgenic lines produced significantly larger seedlings, with similar or higher germination percentages, than did the respective controls. Although the seedlings of transgenic lines were taller and gained more root biomass compared to the respective control plants, their growth was nevertheless inhibited by atrazine treatment compared to that without treatment. When grown in soil containing 2 mg/kg or 5 mg/kg atrazine, the transgenic lines were taller, and had higher total chlorophyll contents than did the respective controls; moreover, three of the strongest transgenic lines completely recovered after 45 days of growth. After treatment with 2 mg/kg or 5 mg/kg of atrazine, the atrazine residue remaining in the soil was 2.9–7.0% or 0.8–8.7% respectively, for transgenic lines, and 44.0–59.2% or 28.1–30.8%, respectively, for control plants. Spraying plants at the vegetative growth stage with 0.15% atrazine effectively killed control plants, but not transgenic lines. Our results indicate that transgenic atzA rice plants show tolerance to atrazine, and may be used as parental lines in future hybrid seed production. PMID:25275554

  12. Wired Widgets: Agile Visualization for Space Situational Awareness

    NASA Astrophysics Data System (ADS)

    Gerschefske, K.; Witmer, J.

    2012-09-01

    Continued advancement in sensors and analysis techniques have resulted in a wealth of Space Situational Awareness (SSA) data, made available via tools and Service Oriented Architectures (SOA) such as those in the Joint Space Operations Center Mission Systems (JMS) environment. Current visualization software cannot quickly adapt to rapidly changing missions and data, preventing operators and analysts from performing their jobs effectively. The value of this wealth of SSA data is not fully realized, as the operators' existing software is not built with the flexibility to consume new or changing sources of data or to rapidly customize their visualization as the mission evolves. While tools like the JMS user-defined operational picture (UDOP) have begun to fill this gap, this paper presents a further evolution, leveraging Web 2.0 technologies for maximum agility. We demonstrate a flexible Web widget framework with inter-widget data sharing, publish-subscribe eventing, and an API providing the basis for consumption of new data sources and adaptable visualization. Wired Widgets offers cross-portal widgets along with a widget communication framework and development toolkit for rapid new widget development, giving operators the ability to answer relevant questions as the mission evolves. Wired Widgets has been applied in a number of dynamic mission domains including disaster response, combat operations, and noncombatant evacuation scenarios. The variety of applications demonstrate that Wired Widgets provides a flexible, data driven solution for visualization in changing environments. In this paper, we show how, deployed in the Ozone Widget Framework portal environment, Wired Widgets can provide an agile, web-based visualization to support the SSA mission. Furthermore, we discuss how the tenets of agile visualization can generally be applied to the SSA problem space to provide operators flexibility, potentially informing future acquisition and system development.

  13. Architecture and performances of the AGILE Telemetry Preprocessing System (TMPPS)

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Lazzarotto, F.; Di Cocco, G.; Fuschino, F.; Tavani, M.

    2008-07-01

    AGILE is an Italian Space Agency (ASI) satellite dedicated to high energy Astrophysics. It was launched successfully on 23 April 2007, and it has been operated by the AGILE Ground Segment, consisting of the Ground Station located in Malindi (Kenia), the Mission Operations Centre (MOC) and the AGILE Data Centre (ADC) established in Italy, at Telespazio in Fucino and at the ASI Science Data Centre (ASDC) in Frascati respectively. Due to the low equatorial orbit at ~ 530 Km. with inclination angle of ~ 2.5°, the satellite passes over the Ground Station every ~ 100'. During the visibility period of . ~ 12', the Telemetry (TM) is down linked through two separated virtual channels, VC0 and VC1. The former is devoted to the real time TM generated during the pass at the average rate of 50 Kbit/s and is directly relayed to the Control Centre. The latter is used to downlink TM data collected on the satellite on-board mass memory during the non visibility period. This generates at the Ground Station a raw TM file of up to 37 MByte. Within 20' after the end of the contact, both the real time and mass memory TM arrive at ADC through the dedicated VPN ASINet. Here they are automatically detected and ingested by the TMPPS pipeline in less than 5 minutes. The TMPPS archives each TM file and sorts its packets into one stream for each of the different TM layout. Each stream is processed in parallel in order to unpack the various telemetry field and archive them into suitable FITS files. Each operation is tracked into a MySQL data base which interfaces the TMPPS pipeline to the rest of the scientific pipeline running at ADC. In this paper the architecture and the performance of the TMPPS will be described and discussed.

  14. An agile enterprise regulation architecture for health information security management.

    PubMed

    Chen, Ying-Pei; Hsieh, Sung-Huai; Cheng, Po-Hsun; Chien, Tsan-Nan; Chen, Heng-Shuen; Luh, Jer-Junn; Lai, Jin-Shin; Lai, Feipei; Chen, Sao-Jie

    2010-09-01

    Information security management for healthcare enterprises is complex as well as mission critical. Information technology requests from clinical users are of such urgency that the information office should do its best to achieve as many user requests as possible at a high service level using swift security policies. This research proposes the Agile Enterprise Regulation Architecture (AERA) of information security management for healthcare enterprises to implement as part of the electronic health record process. Survey outcomes and evidential experiences from a sample of medical center users proved that AERA encourages the information officials and enterprise administrators to overcome the challenges faced within an electronically equipped hospital. PMID:20815748

  15. Perspectives on Industrial Innovation from Agilent, HP, and Bell Labs

    NASA Astrophysics Data System (ADS)

    Hollenhorst, James

    2014-03-01

    Innovation is the life blood of technology companies. I will give perspectives gleaned from a career in research and development at Bell Labs, HP Labs, and Agilent Labs, from the point of view of an individual contributor and a manager. Physicists bring a unique set of skills to the corporate environment, including a desire to understand the fundamentals, a solid foundation in physical principles, expertise in applied mathematics, and most importantly, an attitude: namely, that hard problems can be solved by breaking them into manageable pieces. In my experience, hiring managers in industry seldom explicitly search for physicists, but they want people with those skills.

  16. Development of EarthCube Governance: An Agile Approach

    NASA Astrophysics Data System (ADS)

    Pearthree, G.; Allison, M. L.; Patten, K.

    2013-12-01

    Governance of geosciences cyberinfrastructure is a complex and essential undertaking, critical in enabling distributed knowledge communities to collaborate and communicate across disciplines, distances, and cultures. Advancing science with respect to 'grand challenges," such as global climate change, weather prediction, and core fundamental science, depends not just on technical cyber systems, but also on social systems for strategic planning, decision-making, project management, learning, teaching, and building a community of practice. Simply put, a robust, agile technical system depends on an equally robust and agile social system. Cyberinfrastructure development is wrapped in social, organizational and governance challenges, which may significantly impede progress. An agile development process is underway for governance of transformative investments in geosciences cyberinfrastructure through the NSF EarthCube initiative. Agile development is iterative and incremental, and promotes adaptive planning and rapid and flexible response. Such iterative deployment across a variety of EarthCube stakeholders encourages transparency, consensus, accountability, and inclusiveness. A project Secretariat acts as the coordinating body, carrying out duties for planning, organizing, communicating, and reporting. A broad coalition of stakeholder groups comprises an Assembly (Mainstream Scientists, Cyberinfrastructure Institutions, Information Technology/Computer Sciences, NSF EarthCube Investigators, Science Communities, EarthCube End-User Workshop Organizers, Professional Societies) to serve as a preliminary venue for identifying, evaluating, and testing potential governance models. To offer opportunity for broader end-user input, a crowd-source approach will engage stakeholders not involved otherwise. An Advisory Committee from the Earth, ocean, atmosphere, social, computer and library sciences is guiding the process from a high-level policy point of view. Developmental

  17. A Roadmap for using Agile Development in a Traditional System

    NASA Technical Reports Server (NTRS)

    Streiffert, Barbara; Starbird, Thomas

    2006-01-01

    I. Ensemble Development Group: a) Produces activity planning software for in spacecraft; b) Built on Eclipse Rich Client Platform (open source development and runtime software); c) Funded by multiple sources including the Mars Technology Program; d) Incorporated the use of Agile Development. II. Next Generation Uplink Planning System: a) Researches the Activity Planning and Sequencing Subsystem for Mars Science Laboratory (APSS); b) APSS includes Ensemble, Activity Modeling, Constraint Checking, Command Editing and Sequencing tools plus other uplink generation utilities; c) Funded by the Mars Technology Program; d) Integrates all of the tools for APSS.

  18. Impact of emerging technologies on future combat aircraft agility

    NASA Technical Reports Server (NTRS)

    Nguyen, Luat T.; Gilert, William P.

    1990-01-01

    The foreseeable character of future within-visual-range air combat entails a degree of agility which calls for the integration of high-alpha aerodynamics, thrust vectoring, intimate pilot/vehicle interfaces, and advanced weapons/avionics suites, in prospective configurations. The primary technology-development programs currently contributing to these goals are presently discussed; they encompass the F-15 Short Takeoff and Landing/Maneuver Technology Demonstrator Program, the Enhanced Fighter Maneuverability Program, the High Angle-of-Attack Technology Program, and the X-29 Technology Demonstrator Program.

  19. Comparison of three transposons for the generation of highly productive recombinant CHO cell pools and cell lines.

    PubMed

    Balasubramanian, Sowmya; Rajendra, Yashas; Baldi, Lucia; Hacker, David L; Wurm, Florian M

    2016-06-01

    Several naturally occurring vertebrate transposable elements have been genetically modified to enable the transposition of recombinant genes in mammalian cells. We compared three transposons-piggyBac, Tol2, and Sleeping Beauty-for their ability to generate cell pools (polyclonal cultures of recombinant cells) and clonal cell lines for the large-scale production of recombinant proteins using Chinese hamster ovary cells (CHO-DG44) as the host. Transfection with each of the dual-vector transposon systems resulted in cell pools with volumetric yields of tumor necrosis factor receptor-Fc fusion protein (TNFR:Fc) that were about ninefold higher than those from cell pools generated by conventional plasmid transfection. On average, the cell pools had 10-12 integrated copies of the transgene per cell. In the absence of selection, the volumetric productivity of the cell pools decreased by 50% over a 2-month cultivation period and then remained constant. The average volumetric TNFR:Fc productivity of clonal cell lines recovered from cell pools was about 25 times higher than that of cell lines generated by conventional transfection. In 14-day fed-batch cultures, TNFR:Fc levels up to 900 mg/L were obtained from polyclonal cell pools and up to 1.5 g/L from clonal cell lines using any of the three transposons. Biotechnol. Bioeng. 2016;113: 1234-1243. © 2015 Wiley Periodicals, Inc. PMID:26616356

  20. Agile machining and inspection thrust area team-on-machine probing / compatibility assessment of Parametric Technology Corporation (PTC) pro/CMM DMIS with Zeiss DMISEngine.

    SciTech Connect

    Wade, James Rokwel; Tomlinson, Kurt; Bryce, Edwin Anthony

    2008-09-01

    The charter goal of the Agile Machining and Inspection Thrust Area Team is to identify technical requirements, within the nuclear weapons complex (NWC), for Agile Machining and Inspection capabilities. During FY 2008, the team identified Parametric Technology Corporation (PTC) Pro/CMM as a software tool for use in off-line programming of probing routines--used for measurement--for machining and turning centers. The probing routine would be used for in-process verification of part geometry. The same Pro/CMM program used on the machine tool could also be employed for program validation / part verification using a coordinate measuring machine (CMM). Funding was provided to determine the compatibility of the Pro/CMM probing program with CMM software (Zeiss DMISEngine).

  1. The NERV Methodology: Non-Functional Requirements Elicitation, Reasoning and Validation in Agile Processes

    ERIC Educational Resources Information Center

    Domah, Darshan

    2013-01-01

    Agile software development has become very popular around the world in recent years, with methods such as Scrum and Extreme Programming (XP). Literature suggests that functionality is the primary focus in Agile processes while non-functional requirements (NFR) are either ignored or ill-defined. However, for software to be of good quality both…

  2. Impact of Business Intelligence and IT Infrastructure Flexibility on Competitive Advantage: An Organizational Agility Perspective

    ERIC Educational Resources Information Center

    Chen, Xiaofeng

    2012-01-01

    There is growing use of business intelligence (BI) for better management decisions in industry. However, empirical studies on BI are still scarce in academic research. This research investigates BI from an organizational agility perspective. Organizational agility is the ability to sense and respond to market opportunities and threats with speed,…

  3. Renewed gamma-ray activity of the Blazar 3C 454.3 detected by AGILE

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Parmiggiani, N.; Fioretti, V.; Zoli, A.; Lucarelli, F.; Verrecchia, F.; Pittori, C.; Vercellone, S.; Piano, G.; Munar-Adrover, P.; Tavani, M.; Donnarumma, I.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-06-01

    The AGILE satellite is detecting a significant enhancement in gamma-ray activity from the FSRQ 3C 454.3 (known as 1AGLR J2254+1609) since the recent AGILE ATel #9157, and the optical activity reported in ATel #9150.

  4. Agile methods in biomedical software development: a multi-site experience report

    PubMed Central

    Kane, David W; Hohman, Moses M; Cerami, Ethan G; McCormick, Michael W; Kuhlmman, Karl F; Byrd, Jeff A

    2006-01-01

    Background Agile is an iterative approach to software development that relies on strong collaboration and automation to keep pace with dynamic environments. We have successfully used agile development approaches to create and maintain biomedical software, including software for bioinformatics. This paper reports on a qualitative study of our experiences using these methods. Results We have found that agile methods are well suited to the exploratory and iterative nature of scientific inquiry. They provide a robust framework for reproducing scientific results and for developing clinical support systems. The agile development approach also provides a model for collaboration between software engineers and researchers. We present our experience using agile methodologies in projects at six different biomedical software development organizations. The organizations include academic, commercial and government development teams, and included both bioinformatics and clinical support applications. We found that agile practices were a match for the needs of our biomedical projects and contributed to the success of our organizations. Conclusion We found that the agile development approach was a good fit for our organizations, and that these practices should be applicable and valuable to other biomedical software development efforts. Although we found differences in how agile methods were used, we were also able to identify a set of core practices that were common to all of the groups, and that could be a focus for others seeking to adopt these methods. PMID:16734914

  5. The Impacts of Agile Development Methodology Use on Project Success: A Contingency View

    ERIC Educational Resources Information Center

    Tripp, John F.

    2012-01-01

    Agile Information Systems Development Methods have emerged in the past decade as an alternative manner of managing the work and delivery of information systems development teams, with a large number of organizations reporting the adoption & use of agile methods. The practitioners of these methods make broad claims as to the benefits of their…

  6. Utilization of an agility assessment module in analysis and optimization of preliminary fighter configuration

    NASA Technical Reports Server (NTRS)

    Ngan, Angelen; Biezad, Daniel

    1996-01-01

    A study has been conducted to develop and to analyze a FORTRAN computer code for performing agility analysis on fighter aircraft configurations. This program is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. The validity of the existing code was evaluated by comparing with existing flight test data. A FORTRAN program was developed for a specific metric, PM (Pointing Margin), as part of the agility module. Example trade studies using the agility module along with ACSYNT were conducted using a McDonnell Douglas F/A-18 Hornet aircraft model. Tile sensitivity of thrust loading, wing loading, and thrust vectoring on agility criteria were investigated. The module can compare the agility potential between different configurations and has capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements in the preliminary design.

  7. Monoclonal antibodies to human glycophorin a and cell lines for the production thereof

    SciTech Connect

    Vanderlaan, M.; Bigbee, W.L.; Jensen, R.H.; Fong, S.S.N.; Langlois, R.G.

    1988-06-21

    Cloned mouse hybridoma cell lines have been established which continuously produce antibodies that are highly specific to and exhibit high affinity for glycophorin A/sup N/ and differentiate between the M and N forms of human glycophorin A.

  8. Monoclonal antibodies to human glycophorin A and cell lines for the production thereof

    DOEpatents

    Vanderlaan, Martin; Bigbee, William L.; Jensen, Ronald H.; Fong, Stella S. N.; Langlois, Richard G.

    1988-01-01

    Cloned mouse hybridoma cell lines have been established which continuously produce antibodies that are highly specific to and exhibit high affinity for glycophorin A.sup.N and differentiate between the M and N forms of human glycophorin A.

  9. In vitro cytotoxicity of Indonesian stingless bee products against human cancer cell lines

    PubMed Central

    Kustiawan, Paula M.; Puthong, Songchan; Arung, Enos T.; Chanchao, Chanpen

    2014-01-01

    Objective To screen crude extracts of propolis, bee pollen and honey from four stingless bee species [Trigona incisa (T. incisa)], Timia apicalis, Trigona fusco-balteata and Trigona fuscibasis) native to East Kalimantan, Indonesia for cytotoxic activity against five human cancer cell lines (HepG2, SW620, ChaGo-I, KATO-III and BT474). Methods All samples were extracted with methanol, and then subpartitioned with n-hexane and ethyl acetate. Each crude extract was screened at 20 µg/mL for in vitro cytotoxicity against the cell lines using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. In addition, four previously shown bioactive components from propolis (apigenin, caffeic acid phenyl ester, kaempferol and naringenin) and two chemotherapeutic drugs (doxorubicin and 5-fluorouracil) were used to evaluate the sensitivity of the cell lines. Results Overall, crude extracts from propolis and honey had higher cytotoxic activities than bee pollen, but the activity was dependent upon the extraction solvent, bee species and cell line. Propolis extracts from T. incisa and Timia apicalis showed the highest and lowest cytotoxic activity, respectively. Only the HepG2 cell line was broadly sensitive to the honey extracts. For pure compounds, doxorubicin was the most cytotoxic, the four propolis compounds the least, but the ChaGo-I cell line was sensitive to kaempferol at 10 µg/mL and KATO-III was sensitive to kaempferol and apigenin at 10 µg/mL. All pure compounds were effective against the BT474 cell line. Conclusions Propolis from T. incisa and Trigona fusco-balteata contain an in vitro cytotoxic activity against human cancer cell lines. Further study is required, including the isolation and characterization of the active antiproliferative agent(s). PMID:25183275

  10. Improving Paper Machine Efficiency/Productivity through On-line Control

    SciTech Connect

    Cyrus K Aidun

    2007-08-31

    This project involves implementing a new technology, microforming, in a headbox to produce an isotropic sheet with significant reductions in the MD/CD stiffness ratio (increasing CD specific STFI) and improved sheet uniformity. Microforming involves generating axial vorticity (i.e., swirl) prior to the converging nozzle of the headbox by retrofitting an existing tube block with swirl generation devices referred to as Vortigen system. The Vortigen system developed in this project is a retrofit technology to a hydraulic headbox tube block. The tubes in the tube block are re-designed to generate axial vorticity (or swirl) in the tubes. This type of flow results in higher intensity small-scale turbulence in the forming jet at the slice. The net effect, as demonstrated in pilot and commercial trials, is improvement in formation and surface smoothness, lower MD/CD tensile ratio, and consequently, higher CD strength properties such as CD STFI, Ring Crush and tensile or breaking length. The objective of this project is to implement microforming by developing the retrofit technology for generation and on-line control of axial vorticity in the tubes to optimize turbulent scale and intensity, and consequently, fiber network structure properties in the sheet. This technology results in significant improvements in the performance and capital effectiveness of the paper machine (PM) for a fraction of the cost to replace a headbox. In this project we have developed and demonstrated the concept of generating axial vorticity to control the fiber orientation in the converging zone of the headbox, and to produce a sheet with isotropic fiber orientation. The technology developed here has been demonstrated in static form on several pilot trials and two series of commercial trials. The economic feasibility of this technology is based primarily on fiber savings in cases where a more isotropic fiber orientation can be used to reduce the basis weight of the product. Even a 5% decrease in

  11. RFID-Based Critical Path Expert System for Agility Manufacture Process Management

    NASA Astrophysics Data System (ADS)

    Cheng, Haifang; Xiang, Yuli

    This paper presents a critical path expert system for the agility manufacture process management based on radio frequency identification (RFID) technology. The paper explores that the agility manufacture processes can be visible and controllable with RFID. The critical paths or activities can be easily found out and tracked by the RFID tracing technology. And the expert system can optimize the bottle neck of the task process of the agility management with the critical path adjusting and reforming method. Finally, the paper gives a simple application example of the system to discuss how to adjust the critical paths and how to make the process more agility and flexibility with the critical path expert system. With an RFID-based critical path expert system, the agility manufacture process management will be more effective and efficient.

  12. Autonomous Guidance of Agile Small-scale Rotorcraft

    NASA Technical Reports Server (NTRS)

    Mettler, Bernard; Feron, Eric

    2004-01-01

    This report describes a guidance system for agile vehicles based on a hybrid closed-loop model of the vehicle dynamics. The hybrid model represents the vehicle dynamics through a combination of linear-time-invariant control modes and pre-programmed, finite-duration maneuvers. This particular hybrid structure can be realized through a control system that combines trim controllers and a maneuvering control logic. The former enable precise trajectory tracking, and the latter enables trajectories at the edge of the vehicle capabilities. The closed-loop model is much simpler than the full vehicle equations of motion, yet it can capture a broad range of dynamic behaviors. It also supports a consistent link between the physical layer and the decision-making layer. The trajectory generation was formulated as an optimization problem using mixed-integer-linear-programming. The optimization is solved in a receding horizon fashion. Several techniques to improve the computational tractability were investigate. Simulation experiments using NASA Ames 'R-50 model show that this approach fully exploits the vehicle's agility.

  13. Candidate control design metrics for an agile fighter

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Bailey, Melvin L.; Ostroff, Aaron J.

    1991-01-01

    Success in the fighter combat environment of the future will certainly demand increasing capability from aircraft technology. These advanced capabilities in the form of superagility and supermaneuverability will require special design techniques which translate advanced air combat maneuvering requirements into design criteria. Control design metrics can provide some of these techniques for the control designer. Thus study presents an overview of control design metrics and investigates metrics for advanced fighter agility. The objectives of various metric users, such as airframe designers and pilots, are differentiated from the objectives of the control designer. Using an advanced fighter model, metric values are documented over a portion of the flight envelope through piloted simulation. These metric values provide a baseline against which future control system improvements can be compared and against which a control design methodology can be developed. Agility is measured for axial, pitch, and roll axes. Axial metrics highlight acceleration and deceleration capabilities under different flight loads and include specific excess power measurements to characterize energy meneuverability. Pitch metrics cover both body-axis and wind-axis pitch rates and accelerations. Included in pitch metrics are nose pointing metrics which highlight displacement capability between the nose and the velocity vector. Roll metrics (or torsion metrics) focus on rotational capability about the wind axis.

  14. Gamma-ray blazars: The view from AGILE

    NASA Astrophysics Data System (ADS)

    D'Ammando, F.; Bulgarelli, A.; Chen, A. W.; Donnarumma, I.; Giuliani, A.; Longo, F.; Pacciani, L.; Pucella, G.; Striani, E.; Tavani, M.; Vercellone, S.; Vittorini, V.; Covino, S.; Krimm, H. A.; Raiteri, C. M.; Romano, P.; Villata, M.

    2011-07-01

    During the first 3 years of operation the Gamma-Ray Imaging Detector onboard the AGILE satellite detected several blazars in a high γ-ray activity: 3C 279, 3C 454.3, PKS 1510-089, S5 0716+714, 3C 273, W Comae, Mrk 421, PKS 0537-441 and 4C +21.35. Thanks to the rapid dissemination of our alerts, we were able to obtain multiwavelength data from other observatories such as Spitzer, Swift, RXTE, Suzaku, INTEGRAL, MAGIC, VERITAS, and ARGO as well as radio-to-optical coverage by means of the GASP Project of the WEBT and the REM Telescope. This large multifrequency coverage gave us the opportunity to study the variability correlations between the emission at different frequencies and to obtain simultaneous Spectral Energy Distributions of these sources from radio to γ-ray energy bands, investigating the different mechanisms responsible for their emission and uncovering in some cases a more complex behavior with respect to the standard models. We present a review of the most interesting AGILE results on these γ-ray blazars and their multifrequency data.

  15. The Test Equipment of the AGILE Minicalorimeter Prototype

    NASA Astrophysics Data System (ADS)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Celesti, E.; Di Cocco, G.; Labanti, C.; Mauri, A.; Prest, M.; Vallazza, E.; Froysland, T.

    2004-09-01

    AGILE is an ASI (Italian Space Agency) Small Space Mission for high energy astrophysics in the range 30 MeV - 50 GeV. The AGILE satellite is currently in the C phase and is planned to be launched in 2005. The Payload shall consist of a Tungsten-Silicon Tracker, a CsI Minicalorimeter, an anticoincidence system and a X-Ray detector sensitive in the 10-40 KeV range. The purpose of the Minicalorimeter (MCAL) is twofold. It shall work in conjunction with the Tracker in order to evaluate the energy of the interacting photons, and it shall operate autonomously in the energy range 250KeV-250 MeV for detection of transients and gamma ray burst events and for the measurement of gamma ray background fluctuations. We present the architecture of the Test Equipment we have designed and developed in order to test and verify the MCAL Simplified Electrical Model prototype which has been manufactured in order to validate the design of the MCAL Proto Flight Model.

  16. Discovery of New Gamma-Ray Pulsars with AGILE

    NASA Astrophysics Data System (ADS)

    Pellizzoni, A.; Pilia, M.; Possenti, A.; Chen, A.; Giuliani, A.; Trois, A.; Caraveo, P.; Del Monte, E.; Fornari, F.; Fuschino, F.; Mereghetti, S.; Tavani, M.; Argan, A.; Burgay, M.; Cognard, I.; Corongiu, A.; Costa, E.; D'Amico, N.; De Luca, A.; Esposito, P.; Evangelista, Y.; Feroci, M.; Johnston, S.; Kramer, M.; Longo, F.; Marisaldi, M.; Theureau, G.; Weltevrede, P.; Barbiellini, G.; Boffelli, F.; Bulgarelli, A.; Cattaneo, P. W.; Cocco, V.; D'Ammando, F.; DeParis, G.; Di Cocco, G.; Donnarumma, I.; Fiorini, M.; Froysland, T.; Galli, M.; Gianotti, F.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Lipari, P.; Mineo, T.; Morselli, A.; Pacciani, L.; Perotti, F.; Piano, G.; Picozza, P.; Prest, M.; Pucella, G.; Rapisarda, M.; Rappoldi, A.; Sabatini, S.; Soffitta, P.; Trifoglio, M.; Vallazza, E.; Vercellone, S.; Vittorini, V.; Zambra, A.; Zanello, D.; Pittori, C.; Verrecchia, F.; Preger, B.; Santolamazza, P.; Giommi, P.; Salotti, L.; Bignami, G. F.

    2009-04-01

    Using gamma-ray data collected by the Astro-rivelatore Gamma ad Immagini LEggero (AGILE) satellite over a period of almost one year (from 2007 July to 2008 June), we searched for pulsed signals from 35 potentially interesting radio pulsars, ordered according to F_{γ}∝ √{\\dot{E}} d^{-2} and for which contemporary or recent radio data were available. AGILE detected three new top-ranking nearby and Vela-like pulsars with good confidence both through timing and spatial analysis. Among the newcomers we find pulsars with very high rotational energy losses, such as the remarkable PSR B1509 - 58 with a magnetic field in excess of 1013 Gauss, and PSR J2229 + 6114 providing a reliable identification for the previously unidentified EGRET source 3EG 2227 + 6122. Moreover, the powerful millisecond pulsar B1821 - 24, in the globular cluster M28, is detected during a fraction of the observations. Four other promising gamma-ray pulsar candidates, among which is the notable J2043 + 2740 with an age in excess of 1 million years, show a possible detection in the timing analysis only and deserve confirmation.

  17. Enhanced detection of Terrestrial Gamma-Ray Flashes by AGILE

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Argan, A.; Ursi, A.; Gjesteland, T.; Fuschino, F.; Labanti, C.; Galli, M.; Tavani, M.; Pittori, C.; Verrecchia, F.; D'Amico, F.; Ostgaard, N.; Mereghetti, S.; Campana, R.; Cattaneo, P.; Bulgarelli, A.; Colafrancesco, S.; Dietrich, S.; Longo, F.; Gianotti, F.; Giommi, P.; Rappoldi, A.; Trifoglio, M.; Trois, A.

    2015-12-01

    At the end of March 2015 the onboard configuration of the AGILE satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-ray Flashes (TGFs), especially the short duration ones. We present here the characteristics of the new TGF sample after several months of stable operations with the new configuration. The configuration change was highly successful resulting in the detection of about 100 TGFs/month, an increase of a factor about 11 in TGFs detection rate with respect to previous configuration. As expected, the largest fraction of the new events has short duration, with a median duration of 80 microseconds. We also obtain a sample of events with simultaneous association, within 100 microseconds, with lightning sferics detected by the World Wide Lightning Location Network (WWLLN), confirming previous results reported by the Fermi mission. Given the high detection rate and the AGILE very low (+/-2.5°) orbital inclination, the new configuration provides the largest TGF detection rate surface density (TGFs / km2 / year) to date, opening space for correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region. Eventually, the events with associated simultaneous WWLLN sferics provide a highly reliable sample to probe the long-standing issue of the TGF maximal energy.

  18. Mobile measurement of methane and hydrogen sulfide at natural gas production site fence lines in the Texas Barnett Shale.

    PubMed

    Eapi, Gautam R; Sabnis, Madhu S; Sattler, Melanie L

    2014-08-01

    Production of natural gas from shale formations is bringing drilling and production operations to regions of the United States that have seen little or no similar activity in the past, which has generated considerable interest in potential environmental impacts. This study focused on the Barnett Shale Fort Worth Basin in Texas, which saw the number of gas-producing wells grow from 726 in 2001 to 15,870 in 2011. This study aimed to measure fence line concentrations of methane and hydrogen sulfide at natural gas production sites (wells, liquid storage tanks, and associated equipment) in the four core counties of the Barnett Shale (Denton, Johnson, Tarrant, and Wise). A mobile measurement survey was conducted in the vicinity of 4788 wells near 401 lease sites, representing 35% of gas production volume, 31% of wells, and 38% of condensate production volume in the four-county core area. Methane and hydrogen sulfide concentrations were measured using a Picarro G2204 cavity ring-down spectrometer (CRDS). Since the research team did not have access to lease site interiors, measurements were made by driving on roads on the exterior of the lease sites. Over 150 hr of data were collected from March to July 2012. During two sets of drive-by measurements, it was found that 66 sites (16.5%) had methane concentrations > 3 parts per million (ppm) just beyond the fence line. Thirty-two lease sites (8.0%) had hydrogen sulfide concentrations > 4.7 parts per billion (ppb) (odor recognition threshold) just beyond the fence line. Measured concentrations generally did not correlate well with site characteristics (natural gas production volume, number of wells, or condensate production). t tests showed that for two counties, methane concentrations for dry sites were higher than those for wet sites. Follow-up study is recommended to provide more information at sites identified with high levels of methane and hydrogen sulfide. Implications: Information regarding air emissions from shale gas

  19. Effect of components of resilient denture-lining materials on the growth, acid production and colonization of Candida albicans.

    PubMed

    Nikawa, H; Yamamoto, T; Hamada, T

    1995-11-01

    Variation in the components of soft lining materials, i.e. the size of polymer particles, the ethyl alcohol content of the liquids and the type of plasticizer, were investigated with respect to their effects on the growth and colonization of Candida albicans. Inhibitory effects on fungal growth and/or acid production were found to vary depending upon the components of soft lining materials. In particular, two plasticizers, benzyl benzoate (BB) and benzyl salicylate (BS), significantly decreased the growth rate, whereas the size of polymer particle had little effect on fungal growth. Ethyl alcohol content of liquid significantly affected the fungal growth and/or acid production depending upon the plasticizer used. For instance, in the case of BS, the antifungal effect was related to ethyl alcohol contents, whereas a reverse effect was observed with benzyl n-butyl phthalate (BBP). Further examination using scanning electron microscopy revealed that Candida blastospores colonized lining materials in the following two ways depending on the plasticizers used. On the BS and dibutyl phthalate (DBP) specimen, the blastospore of this yeast associated loosely, whereas, in the case of BB, BBP and butyl phthalyl butyl glycorate (BPBG), fungal blastospore tightly and invasively colonized onto the specimens. These results clearly demonstrated a relationship between components of soft lining materials and fungal growth and colonization. PMID:8558354

  20. The gas-phase on-line production of vanadium oxytrihalides, VOX 3 and their identification by infrared spectroscopy

    NASA Astrophysics Data System (ADS)

    Zidan, Mohammed D.; Allaf, Abdul W.

    2000-12-01

    A new route has been devised, leading to the production of VOX 3 molecules where XF, Br and I by an on-line process using vanadium oxytrichloride, VOCl 3 as a starting compound passed over the following heated salts NaF, KBr and KI at 375, 700 and 550°C, respectively. The products have been characterized by the IR spectra of their vapors. The low resolution gas phase on-line Fourier transform infrared spectra reported for the first time show strong bands with PQR type structure, centered at 1058, 1035, 1030 and 1025 cm -1 assigned to the ν1( a1), the OV stretching fundamental mode of VOF 3, VOCl 3, VOBr 3 and VOI 3, respectively.

  1. Electron-positron pair production near the Galactic Centre and the 511 keV emission line

    NASA Astrophysics Data System (ADS)

    Chan, Man Ho

    2016-02-01

    Recent observations indicate that a high production rate of positrons (strong 511 keV line) and a significant amount of excess GeV gamma-ray exist in our Galactic bulge. The latter issue can be explained by ˜40 GeV dark matter annihilation through b bar{b} channel while the former one remains a mystery. On the other hand, recent studies reveal that a large amount of high-density gas might exist near the Galactic Centre million years ago to account for the young, massive stars extending from 0.04-7 pc. In this Letter, I propose a new scenario and show that the 40 GeV dark matter annihilation model can also explain the required positron production rate (511 keV line) in the bulge due to the existence of the high-density gas cloud near the supermassive black hole long time ago.

  2. Production of fat-1 transgenic rats using a post-natal female germline stem cell line.

    PubMed

    Zhou, Li; Wang, Lei; Kang, Jing X; Xie, Wenhai; Li, Xiaoyong; Wu, Changqing; Xu, Bo; Wu, Ji

    2014-03-01

    Germline stem cell lines possess the abilities of self-renewal and differentiation, and have been established from both mouse and human ovaries. Here, we established a new female germline stem cell (FGSC) line from post-natal rats by immunomagnetic sorting for Fragilis, which showed a normal karyotype, high telomerase activity, and a consistent gene expression pattern of primordial germ cells after 1 year of culture. Using an in vitro differentiation system, the FGSC line could differentiate into oocytes. After liposome-based transfection with green fluorescent protein (GFP) or fat-1 vectors, the FGSCs were transplanted into the ovaries of infertile rats. The transplanted FGSCs underwent oogenesis, and the rats produced offspring carrying the GFP or fat-1 transgene after mating with wild-type male rats. The efficiency of gene transfer was 27.86-28.00%, and 2 months was needed to produce transgenic rats. These findings have implications in biomedical research and potential applications in biotechnology. PMID:24258451

  3. Comparison of terpenoid indole alkaloid production and degradation in two cell lines of Tabernaemontana divaricata.

    PubMed

    Dagnino, D; Schripsema, J; Verpoorte, R

    1993-12-01

    Two cell lines of Tabernaemontana divaricata derived from the same suspension culture accumulate different amounts of the terpenoid indole alkaloids O-acetylvallesamine and voaphylline. [(15)N]O-acetylvallesamine and [(15)N]voaphylline were added to the suspension cultures to investigate whether the lack of accumulating capacity of one of the cell lines was due to a low biosynthetic ability or to high turnover rates. The difference was shown to be due to the inability of the cell culture to biosynthesize both alkaloids. Both cell lines were able to metabolize O-acetylvallesamine. This metabolisation occurred mainly during the stationary phase. The alkaloids added were chemically unstable under culture conditions. Under normal batch cell culture conditions chemical breakdown is thought to play a minor role in the total amount of compound transformed. PMID:24196295

  4. Production and Identification of Wheat-Agropyron cristatum 2P Translocation Lines.

    PubMed

    Li, Huanhuan; Lv, Mingjie; Song, Liqiang; Zhang, Jinpeng; Gao, Ainong; Li, Lihui; Liu, Weihua

    2016-01-01

    Agropyron cristatum (L.) Gaertn. (2n = 28, PPPP), a wild relative of common wheat, possesses many potentially valuable traits that can be transferred to common wheat through breeding programs. The wheat-A. cristatum disomic addition and translocation lines can be used as bridge materials to introduce alien chromosomal segments to wheat. Wheat-A. cristatum 2P disomic addition line II-9-3 was highly resistant to powdery mildew and leaf rust, which was reported in our previous study. However, some translocation lines induced from II-9-3 have not been reported. In this study, some translocation lines were induced from II-9-3 by 60Co-γ irradiation and gametocidal chromosome 2C and then identified by cytological methods. Forty-nine wheat-A. cristatum translocation lines were obtained and various translcoation types were identified by GISH (genomic in situ hybridization), such as whole-arm, segmental and intercalary translocations. Dual-color FISH (fluorescent in situ hybridization) was applied to identify the wheat chromosomes involved in the translocations, and the results showed that A. cristatum 2P chromosome segments were translocated to the different wheat chromosomes, including 1A, 2A, 3A, 4A, 5A, 6A, 7A, 3B, 5B, 7B, 1D, 4D and 6D. Many different types of wheat-A. cristatum alien translocation lines would be valuable for not only identifying and cloning A. cristatum 2P-related genes and understanding the genetics and breeding effects of the translocation between A. cristatum chromosome 2P and wheat chromosomes, but also providing new germplasm resources for the wheat genetic improvement. PMID:26731742

  5. Production and identification of wheat - Agropyron cristatum (1.4P) alien translocation lines.

    PubMed

    Liu, Wei-Hua; Luan, Yang; Wang, Jing-Chang; Wang, Xiao-Guang; Su, Jun-Ji; Zhang, Jin-Peng; Yang, Xin-Ming; Gao, Ai-Nong; Li, Li-Hui

    2010-06-01

    The P genome of Agropyron Gaertn., a wild relative of wheat, contains an abundance of desirable genes that can be utilized as genetic resources to improve wheat. In this study, wheat - Aegilops cylindrica Host gametocidal chromosome 2C addition lines were crossed with wheat - Agropyron cristatum (L.) Gaertn. disomic addition line accession II-21 with alien recombinant chromosome (1.4)P. We successfully induced wheat - A. cristatum alien chromosomal translocations for the first time. The frequency of translocation in the progeny was 3.75%, which was detected by molecular markers and genomic in situ hybridization (GISH). The translocation chromosomes were identified by dual-color GISH /fluorescence in situ hybridization (FISH). The P genomic DNA was used as probe to detect the (1.4)P chromosome fragment, and pHvG39, pAs1, or pSc119.2 repeated sequences were used as probes to identify wheat translocated chromosomes. The results showed that six types of translocations were identified in the three wheat - A. cristatum alien translocation lines, including the whole arm or terminal portion of a (1.4)P chromosome. The (1.4)P chromosome fragments were translocated to wheat chromosomes 1B, 2B, 5B, and 3D. The breakpoints were located at the centromeres of 1B and 2B, the pericentric locations of 5BS, and the terminals of 5BL and 3DS. In addition, we obtained 12 addition-deletion lines that contained alien A. cristatum chromosome (1.4)P in wheat background. All of these wheat - A. cristatum alien translocation lines and addition-deletion lines would be valuable for identifying A. cristatum chromosome (1.4)P-related genes and providing genetic resources and new germplasm accessions for the genetic improvement of wheat. The specific molecular markers of A. cristatum (1.4)P chromosome have been developed and used to track the (1.4)P chromatin. PMID:20555436

  6. Production and Identification of Wheat-Agropyron cristatum 2P Translocation Lines

    PubMed Central

    Li, Huanhuan; Lv, Mingjie; Song, Liqiang; Zhang, Jinpeng; Gao, Ainong; Li, Lihui; Liu, Weihua

    2016-01-01

    Agropyron cristatum (L.) Gaertn. (2n = 28, PPPP), a wild relative of common wheat, possesses many potentially valuable traits that can be transferred to common wheat through breeding programs. The wheat-A. cristatum disomic addition and translocation lines can be used as bridge materials to introduce alien chromosomal segments to wheat. Wheat-A. cristatum 2P disomic addition line II-9-3 was highly resistant to powdery mildew and leaf rust, which was reported in our previous study. However, some translocation lines induced from II-9-3 have not been reported. In this study, some translocation lines were induced from II-9-3 by 60Co-γ irradiation and gametocidal chromosome 2C and then identified by cytological methods. Forty-nine wheat-A. cristatum translocation lines were obtained and various translcoation types were identified by GISH (genomic in situ hybridization), such as whole-arm, segmental and intercalary translocations. Dual-color FISH (fluorescent in situ hybridization) was applied to identify the wheat chromosomes involved in the translocations, and the results showed that A. cristatum 2P chromosome segments were translocated to the different wheat chromosomes, including 1A, 2A, 3A, 4A, 5A, 6A, 7A, 3B, 5B, 7B, 1D, 4D and 6D. Many different types of wheat-A. cristatum alien translocation lines would be valuable for not only identifying and cloning A. cristatum 2P-related genes and understanding the genetics and breeding effects of the translocation between A. cristatum chromosome 2P and wheat chromosomes, but also providing new germplasm resources for the wheat genetic improvement. PMID:26731742

  7. Efficient duck hepatitis B virus production by an avian liver tumor cell line.

    PubMed Central

    Condreay, L D; Aldrich, C E; Coates, L; Mason, W S; Wu, T T

    1990-01-01

    Duck hepatitis B virus (DHBV) is produced in small amounts following transfection of human hepatoma or hepatoblastoma cell lines with cloned viral DNA. In a search for better hosts for DHBV replication, two avian liver cell lines were investigated. One of these cell lines, LMH, produced 5 to 10 times more DNA replicative intermediates and 10 to 20 times more infectious DHBV than did either of the two human cell lines, HuH-7 and Hep G2. Utilization of cell lines in genetic analyses of virus replication is often dependent upon obtaining efficient complementation between cotransfected viral genomes. We assayed transcomplementation of a viral polymerase (pol) gene mutant, which is rather inefficient in transfected human cells, and found that viral DNA synthesis was at least 20 times more efficient following cotransfection of LMH cells than in similarly transfected HuH-7 cells. Recombination, a potential interpretation problem in complementation assays, occurred at low levels in the cotransfected cultures but was substantially reduced or eliminated by creation of an LMH subline stably expressing the viral polymerase. This cell line, pol-7, supported the replication of DHBV pol mutants at ca. 10 to 15% of the level of virus replication obtained following transfection with wild-type viral DNA. By transcomplementation of a pol gene mutant in LMH cells, we were able to produce sufficient virus with the mutant genome to investigate the role of polymerase in covalently closed circular DNA amplification. Our results substantiate the hypothesis that covalently closed circular DNA is synthesized by the viral reverse transcriptase. Images PMID:2352324

  8. Marginally trapped submanifolds in Lorentzian space forms and in the Lorentzian product of a space form by the real line

    SciTech Connect

    Anciaux, Henri; Godoy, Yamile

    2015-02-15

    We give local, explicit representation formulas for n-dimensional spacelike submanifolds which are marginally trapped in the Minkowski space ℝ{sub 1}{sup n+2}, the de Sitter space dS{sup n+2}, the anti-de Sitter space AdS{sup n+2} and the Lorentzian products S{sup n+1} × ℝ and ℍ{sup n+1} × ℝ of the sphere and the hyperbolic space by the real line.

  9. The charge breeder beam line for the selective production of exotic species project at INFN-Legnaro National Laboratories

    NASA Astrophysics Data System (ADS)

    Galatà, A.; Comunian, M.; Maggiore, M.; Manzolaro, M.; Angot, J.; Lamy, T.

    2014-02-01

    SPES (Selective Production of Exotic Species) is an INFN (Istituto Nazionale di Fisica Nucleare) project with the aim at producing and post-accelerating exotic beams to perform forefront research in nuclear physics. To allow post-acceleration of the radioactive ions, an ECR-based Charge Breeder (CB) developed on the basis of the Phoenix booster was chosen. The design of the complete beam line for the SPES-CB will be described: a system for stable 1+ beams production was included; special attention was paid to the medium resolution mass spectrometer after the CB to limit possible superposition of the exotic beams with the impurities present in the ECR plasma.

  10. A Robot Laser As A Flexible Tool For Cutting Openings In The Car-Body On The Production Line

    NASA Astrophysics Data System (ADS)

    Felske, A.; Lunzmann, F.

    1986-11-01

    A flexible laser robot system is described which has been selected for the purpose of cutting additional openings in entire bodies in white on the conveyor. The lightweight CO2 400-W-laser generator is carried and moved computer-controlled by the VOLKSWAGEN robotic system with a fixed 3-mirror robot arm for minimizing losses of energy and for increasing quality and reliability. In a pilot project this technique is integrated in the production line at a final stage of production and can be started with the designation of the vehicle's body.

  11. Generation and functional analysis of T cell lines and clones specific for schistosomula released products (SRP-A).

    PubMed

    Damonneville, M; Velge, F; Verwaerde, C; Pestel, J; Auriault, C; Capron, A

    1987-08-01

    Antigens present in the products released by the larval stage of schistosome (SRP-A) were shown to induce a strong cytotoxic and protective IgE response both in the rat and the monkey. T cell lines and clones specific for SRP-A or 26 kD antigens which are the main target of the cytotoxic IgE have been derived. The passive transfer of SRP-A specific T lymphocytes into infected rats led to an increase of the IgE response, conferring a significant level of protection to the rats. In coculture assays in vitro, these cell lines significantly enhanced the production of IgE by SRP-A sensitized rat spleen cells. This helper effect on the IgE response was confirmed with 26 kD T cell clone supernatants. Moreover, supernatants obtained after stimulation with phorbol myristate acetate were able to enhance the IgE production of a hybridoma B cell line (B48-14) producing a monoclonal IgE antibody, cytotoxic for the schistosomula. PMID:3498590

  12. Continuous cell lines from the Muscovy duck as potential replacement for primary cells in the production of avian vaccines.

    PubMed

    Jordan, Ingo; John, Katrin; Höwing, Kristin; Lohr, Verena; Penzes, Zoltán; Gubucz-Sombor, Erzsébet; Fu, Yan; Gao, Peng; Harder, Timm; Zádori, Zoltán; Sandig, Volker

    2016-01-01

    Veterinary vaccines contribute to food security, interrupt zoonotic transmissions, and help to maintain overall health in livestock. Although vaccines are usually cost-effective, their adoption depends on a multitude of factors. Because poultry vaccines are usually given to birds with a short life span, very low production cost per dose is one important challenge. Other hurdles are to ensure a consistent and reliable supply of very large number of doses, and to have flexible production processes to accommodate a range of different pathogens and dosage requirements. Most poultry vaccines are currently being produced on primary avian cells derived from chicken or waterfowl embryos. This production system is associated with high costs, logistic complexities, rigid intervals between harvest and production, and supply limitations. We investigated whether the continuous cell lines Cairina retina and CR.pIX may provide a substrate independent of primary cell cultures or embryonated eggs. Viruses examined for replication in these cell lines are strains associated with, or contained in vaccines against egg drop syndrome, Marek's disease, Newcastle disease, avian influenza, infectious bursal disease and Derzsy's disease. Each of the tested viruses required the development of unique conditions for replication that are described here and can be used to generate material for in vivo efficacy studies and to accelerate transfer of the processes to larger production volumes. PMID:26814192

  13. Cell lines for the production of monoclonal antibodies to human glycophorin A

    SciTech Connect

    Bigbee, W.L.; Fong, S.S.N.; Jensen, R.H.; Vanderlaan, M.; Langlois, R.G.

    1988-08-30

    Cloned mouse hybridoma cell lines have been established which continuously produce antibodies that differentiate between the M and N forms of human glycophorin A. These antibodies have potential application as human blood group reagents, as markers for terminally differentiated erythroid cells and as immunofluorescent labels of somatically variant human erythrocytes.

  14. Responses of rice cultivars and elite lines to diseases in conventional production system, 2010

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The experiment was established in a field of League-type soil (3% sand, 32% silt, and 64% clay) under organic management for many years at the Texas A&M University System's Agrilife Research and Extension Center, Beaumont. Twenty rice cultivars and lines were arranged in a randomized complete block ...

  15. Method and cell lines for the production of monoclonal antibodies to human glycophorin A

    DOEpatents

    Bigbee, W.L.; Fong, S.S.N.; Jensen, R.H.; Vanderlaan, M.

    Cloned mouse hybridoma cell lines have been established which continuously produce antibodies that differentiate between the M and N forms of human glycophorin A. These antibodies have potential application as human blood group reagents, as markers for terminally differentiated erythroid cells and as immunofluorescent labels of somatically variant human erythrocytes.

  16. Cell lines for the production of monoclonal antibodies to human glycophorin A

    DOEpatents

    Bigbee, William L.; Fong, Stella S. N.; Jensen, Ronald H.; Vanderlaan, Martin; Langlois, Richard G.

    1988-01-01

    Cloned mouse hybridoma cell lines have been established which continuously produce antibodies that differentiate between the M and N forms of human glycophorin A. These antibodies have potential application as human blood group reagents, as markers for terminally differentiated erythroid cells and as immunofluorescent labels of somatically variant human erythrocytes.

  17. Production Line Materials. Youth Training Scheme. Core Exemplar Work Based Project.

    ERIC Educational Resources Information Center

    Further Education Staff Coll., Blagdon (England).

    This trainer's guide is intended to assist supervisors of work-based career training projects in helping students understand the operation of an assembly line, including safe working procedures. The guide is one in a series of core curriculum modules that is intended for use in combination on- and off-the-job programs to familiarize youth with the…

  18. On-ground calibration of AGILE-GRID with a photon beam: results and lessons for the future

    NASA Astrophysics Data System (ADS)

    Cattaneo, P. W.; Rappoldi, A.; Argan, A.; Buonomo, B.; Bulgarelli, A.; Chen, A. W.; D'Ammando, F.; Foggetta, L.; Fuschino, F.; Galli, M.; Gianotti, F.; Giuliani, A.; Longo, F.; Marisaldi, M.; Mazzitelli, G.; Pellizzoni, A.; Prest, M.; Pucella, G.; Quintieri, L.; Tavani, M.; Trifoglio, M.; Trois, A.; Valente, P.; Vallazza, E.; Vercellone, S.; Barbiellini, G.; Caraveo, P.; Costa, E.; De Paris, G.; Del Monte, E.; Di Cocco, G.; Donnarumma, I.; Evangelista, Y.; Ferrari, A.; Feroci, M.; Fiorini, M.; Giusti, M.; Labanti, C.; Lapshov, I.; Lazzarotto, F.; Lipari, P.; Lucarelli, F.; Mereghetti, S.; Morelli, E.; Moretti, E.; Morselli, A.; Pacciani, L.; Perotti, F.; Piano, G.; Picozza, P.; Pilia, M.; Rapisarda, M.; Rubini, A.; Sabatini, S.; Soffitta, P.; Striani, E.; Vittorini, V.; Zanello, D.; Colafrancesco, S.; Giommi, P.; Pittori, C.; Santolamazza, P.; Verrecchia, F.; Salotti, L.

    2012-09-01

    At the core of the AGILE scientific instrument, designed to operate on a satellite, there is the Gamma Ray Imaging Detector (GRID) consisting of a Silicon Tracker (ST), a Cesium Iodide Mini-Calorimeter and an Anti-Coincidence system of plastic scintillator bars. The ST needs an on-ground calibration with a γ-ray beam to validate the simulation used to calculate the energy response function and the effective area versus the energy and the direction of the γ rays. A tagged γ-ray beam line was designed at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali of Frascati (LNF), based on an electron beam generating γ rays through bremsstrahlung in a position-sensitive target. The γ-ray energy is deduced by the difference with the post-bremsstrahlung electron energy1-.2 The electron energy is measured by a spectrometer consisting of a dipole magnet and an array of position sensitive silicon strip detectors, the Photon Tagging System (PTS). The use of the combined BTF-PTS system as tagged photon beam requires understanding the efficiency of γ-ray tagging, the probability of fake tagging, the energy resolution and the relation of the PTS hit position versus the γ-ray energy. This paper describes this study comparing data taken during the AGILE calibration occurred in 2005 with simulation.

  19. Dynamic tumor tracking using the Elekta Agility MLC

    SciTech Connect

    Fast, Martin F. Nill, Simeon Bedford, James L.; Oelfke, Uwe

    2014-11-01

    Purpose: To evaluate the performance of the Elekta Agility multileaf collimator (MLC) for dynamic real-time tumor tracking. Methods: The authors have developed a new control software which interfaces to the Agility MLC to dynamically program the movement of individual leaves, the dynamic leaf guides (DLGs), and the Y collimators (“jaws”) based on the actual target trajectory. A motion platform was used to perform dynamic tracking experiments with sinusoidal trajectories. The actual target positions reported by the motion platform at 20, 30, or 40 Hz were used as shift vectors for the MLC in beams-eye-view. The system latency of the MLC (i.e., the average latency comprising target device reporting latencies and MLC adjustment latency) and the geometric tracking accuracy were extracted from a sequence of MV portal images acquired during irradiation for the following treatment scenarios: leaf-only motion, jaw + leaf motion, and DLG + leaf motion. Results: The portal imager measurements indicated a clear dependence of the system latency on the target position reporting frequency. Deducting the effect of the target frequency, the leaf adjustment latency was measured to be 38 ± 3 ms for a maximum target speed v of 13 mm/s. The jaw + leaf adjustment latency was 53 ± 3 at a similar speed. The system latency at a target position frequency of 30 Hz was in the range of 56–61 ms for the leaves (v ≤ 31 mm/s), 71–78 ms for the jaw + leaf motion (v ≤ 25 mm/s), and 58–72 ms for the DLG + leaf motion (v ≤ 59 mm/s). The tracking accuracy showed a similar dependency on the target position frequency and the maximum target speed. For the leaves, the root-mean-squared error (RMSE) was between 0.6–1.5 mm depending on the maximum target speed. For the jaw + leaf (DLG + leaf) motion, the RMSE was between 0.7–1.5 mm (1.9–3.4 mm). Conclusions: The authors have measured the latency and geometric accuracy of the Agility MLC, facilitating its future use for clinical

  20. Multi-objective Analysis for a Sequencing Planning of Mixed-model Assembly Line

    NASA Astrophysics Data System (ADS)

    Shimizu, Yoshiaki; Waki, Toshiya; Yoo, Jae Kyu

    Diversified customer demands are raising importance of just-in-time and agile manufacturing much more than before. Accordingly, introduction of mixed-model assembly lines becomes popular to realize the small-lot-multi-kinds production. Since it produces various kinds on the same assembly line, a rational management is of special importance. With this point of view, this study focuses on a sequencing problem of mixed-model assembly line including a paint line as its preceding process. By taking into account the paint line together, reducing work-in-process (WIP) inventory between these heterogeneous lines becomes a major concern of the sequencing problem besides improving production efficiency. Finally, we have formulated the sequencing problem as a bi-objective optimization problem to prevent various line stoppages, and to reduce the volume of WIP inventory simultaneously. Then we have proposed a practical method for the multi-objective analysis. For this purpose, we applied the weighting method to derive the Pareto front. Actually, the resulting problem is solved by a meta-heuristic method like SA (Simulated Annealing). Through numerical experiments, we verified the validity of the proposed approach, and discussed the significance of trade-off analysis between the conflicting objectives.

  1. ExoMol: Large-scale production of line lists for molecules important for modelling of planetary atmospheres

    NASA Astrophysics Data System (ADS)

    Yurchenko, S.; Tennyson, J.

    2013-09-01

    The spectral characterization of astrophysical objects cool enough to form polyatomic molecules (the atmospheres of planets, brown dwarfs, planetary discs etc.) requires a huge amount of fundamental molecular data. With a few exceptions the existing molecular line lists are not sufficiently accurate and complete. The aim of ExoMol [1] is to generate comprehensive line lists for all molecules likely to be observable in exoplanet atmospheres in the foreseeable future (see www.exomol.com for more details). We identified the following 40 species that are important sources of opacity in (exo)planets and brown dwarfs and where there is currently a lack of fundamental data on wavelength and temperature-dependent absorption: • Diatomics: AlO, AlH, BeH, CaH, C2, CrH, FeH, HF, HCl, KCl, MgH, MgO, NaH, NaCl, NiH, O2,SiO, SiH, S2, SH, TiH, TiO, VO, YO • Triatomics: C3, H2S, SO2 • Tetratomics: H2CO, H2CS, HCCH, HOOH, PH3,SO3 • Pentatomics: CH4, HNO3 • Larger molecules: C2H4, C2H6, C3H8, P2H2, P2H4 The production of comprehensive and very large rotation-vibration and rotation-vibration-electronic line lists requires a mixture of first principles quantum mechanical methods and empirical tuning based on laboratory spectroscopic data and makes extensive use of state-of-the-art computing. These and other aspects of molecular line lists, their production and astrophysical applications will be discussed. The contribution will make specific reference to molecules for which line lists have recently been completed or are nearing completion: phosphine, hydrogen sulphide, hydrogen peroxide, methane, formaldehyde, nitric acid as well as to a number of diatomic molecules of astrophysical importance, see Fig. 1.

  2. Effects of Preventative Ankle Taping on Planned Change-of-Direction and Reactive Agility Performance and Ankle Muscle Activity in Basketballers

    PubMed Central

    Jeffriess, Matthew D.; Schultz, Adrian B.; McGann, Tye S.; Callaghan, Samuel J.; Lockie, Robert G.

    2015-01-01

    This study investigated the effects of preventative ankle taping on planned change-of-direction and reactive agility performance and peak ankle muscle activity in basketballers. Twenty male basketballers (age = 22.30 ± 3.97 years; height = 1.84 ± 0.09 meters; body mass = 85.96 ± 11.88 kilograms) with no ankle pathologies attended two testing sessions. Within each session, subjects completed six planned and six reactive randomized trials (three to the left and three to the right for each condition) of the Y-shaped agility test, which was recorded by timing lights. In one session, subjects had both ankles un-taped. In the other, both ankles were taped using a modified subtalar sling. Peak tibialis anterior, peroneus longus (PL), peroneus brevis (PB), and soleus muscle activity was recorded for both the inside and outside legs across stance phase during the directional change, which was normalized against 10-meter sprint muscle activity (nEMG). Both the inside and outside cut legs during the change-of-direction step were investigated. Repeated measures ANOVA determined performance time and nEMG differences between un-taped and taped conditions. There were no differences in planned change-of-direction or reactive agility times between the conditions. Inside cut leg PL nEMG decreased when taped for the planned left, reactive left, and reactive right cuts (p = 0.01). Outside leg PB and soleus nEMG increased during the taped planned left cut (p = 0.02). There were no other nEMG changes during the cuts with taping. Taping did not affect change-of-direction or agility performance. Inside leg PL activity was decreased, possibly due to the tape following the line of muscle action. This may reduce the kinetic demand for the PL during cuts. In conclusion, ankle taping did not significantly affect planned change-of-direction or reactive agility performance, and did not demonstrate large changes in activity of the muscle complex in healthy basketballers. Key points Ankle

  3. Frequency-agile, rapid scanning cavity ring-down spectroscopy (FARS-CRDS) measurements of the (30012)←(00001) near-infrared carbon dioxide band

    NASA Astrophysics Data System (ADS)

    Long, D. A.; Wójtewicz, S.; Miller, C. E.; Hodges, J. T.

    2015-08-01

    We present new high accuracy measurements of the (30012)←(00001) CO2 band near 1575 nm recorded with a frequency-agile, rapid scanning cavity ring-down spectrometer. The resulting spectra were fit with the partially correlated, quadratic-speed-dependent Nelkin-Ghatak profile with line mixing. Significant differences were observed between the fitted line shape parameters and those found in existing databases, which are based upon more simplistic line profiles. Absolute transition frequencies, which were referenced to an optical frequency comb, are given, as well as the other line shape parameters needed to model this line profile. These high accuracy measurements should allow for improved atmospheric retrievals of greenhouse gas concentrations by current and future remote sensing missions.

  4. Design studies for a spectrally agile staring sensor /SASS/ system

    NASA Astrophysics Data System (ADS)

    Kollodge, M. A.; Cox, J. A.; Marshall, W. C.; Solstad, R. G.; Steadman, S. S.

    1981-01-01

    The operation of the Spectrally Agile Staring Sensor (SASS) involves the employment of a telescope system which uses variable spectral band information to detect and identify moving IR sources against the background radiance of the earth. A description is presented of SASS simulation studies. A signal-to-noise ratio (SNR) expression used as a measure of system performance is considered. Attention is given to the target trajectory generator, a target signature model, a background and atmospheric model, a Dual Tunable Fabry-Perot (DTFP) optical filter model, problems of out-of-band leakage transmission, a Focal Plane Array (FPA)/spot convolution model, SNR improvement with high filter transmission efficiency, system performance vs DTFP optical filter parameters, and system performance vs atmospheric conditions.

  5. Agile and dexterous robot for inspection and EOD operations

    NASA Astrophysics Data System (ADS)

    Handelman, David A.; Franken, Gordon H.; Komsuoglu, Haldun

    2010-04-01

    The All-Terrain Biped (ATB) robot is an unmanned ground vehicle with arms, legs and wheels designed to drive, crawl, walk and manipulate objects for inspection and explosive ordnance disposal tasks. This paper summarizes on-going development of the ATB platform. Control technology for semi-autonomous legged mobility and dual-arm dexterity is described as well as preliminary simulation and hardware test results. Performance goals include driving on flat terrain, crawling on steep terrain, walking on stairs, opening doors and grasping objects. Anticipated benefits of the adaptive mobility and dexterity of the ATB platform include increased robot agility and autonomy for EOD operations, reduced operator workload and reduced operator training and skill requirements.

  6. An Adaptive, Agile, Reconfigurable Photonic System for Handling Analog Signals

    NASA Astrophysics Data System (ADS)

    Middleton, C.; DeSalvo, R.; Escalera, N.

    2014-09-01

    Photonic techniques can be applied to microwave and millimeter wave transmission and signal processing challenges, including signal transport, distribution, filtering, and up- and down-conversion. We present measured performance results for a wideband photonic-assisted frequency converter with 4 GHz instantaneous bandwidth and full spectral coverage up to 45 GHz. The photonic-assisted converter is applicable for both ground and space applications. We show the system performance in a ground station application, in which high frequency analog signals were transported over a moderate distance and down-converted directly into a digitizing receiver. We also describe our progress in the packaging and space qualification of the photonic system, and discuss the next steps toward higher TRL. The photonic system provides an adaptive, agile, reconfigurable backbone for handling analog signals, with performance superior to existing microwave systems.

  7. The agile transversal filter - A flexible building block for ICNIA

    NASA Astrophysics Data System (ADS)

    Botha, D. G.; Smead, F. W.

    Integrated Communications, Navigation and Identification Avionics (ICNIA) is an advanced development program to demonstrate an integrated systems approach to the implementation of functions normally performed by a collection of independent black boxes. The system design partitions all CNI functions to optimize modular commonality within the ICNIA system. One function required in many parallel channels is the processing of signals with instantaneous bandwidths of 10 MHz or less. A specific implementation is the Narrow Band Agile Transversal Filter (NBATF), which can be implemented in state-of-the-art technology, can process signals with a variety of algorithms selectable under software control, and can be replicated within the system, as required, to perform the total set of functions. The NBATF constitutes a building block module within the ICNIA system.

  8. SAMPLE (Sandia agile MEMS prototyping, layout tools, and education)

    NASA Astrophysics Data System (ADS)

    Davies, Brady R.; Craig Barron, Carole; Sniegowski, Jeffry J.; Rodgers, M. Steven

    1997-09-01

    The SAMPLE (Sandia agile MEMS prototyping, layout tools, and education) service makes Sandia's state-of-the-art surface micromachining fabrication process, known as SUMMiT, available to U.S. industry for the first time. The service provides a short course and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (microelectromechanical systems) chips. SUMMiT (Sandia ultra-planar, multi-level MEMS technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  9. SAMPLE (Sandia Agile MEMS Prototyping, Layout tools, and Education)

    SciTech Connect

    Davies, B.R.; Barron, C.C.; Sniegowski, J.J.; Rodgers, M.S.

    1997-08-01

    The SAMPLE (Sandia Agile MEMS Protyping, Layout tools, and Education) service makes Sandia`s state-of-the-art surface-micromachining fabrication process, known as SUMMiT, available to US industry for the first time. The service provides a short cause and customized computer-aided design (CAD) tools to assist customers in designing micromachine prototypes to be fabricated in SUMMiT. Frequent small-scale manufacturing runs then provide SAMPLE designers with hundreds of sophisticated MEMS (MicroElectroMechanical Systems) chips. SUMMiT (Sandia Ultra-planar, Multi-level MEMS Technology) offers unique surface-micromachining capabilities, including four levels of polycrystalline silicon (including the ground layer), flanged hubs, substrate contacts, one-micron design rules, and chemical-mechanical polishing (CMP) planarization. This paper describes the SUMMiT process, design tools, and other information relevant to the SAMPLE service and SUMMiT process.

  10. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the giant asteroid Vesta and the dwarf planet Ceres, the two largest members of the main asteroid belt. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional low-thrust design objectives (like minimum change in velocity or minimum transfer time) often result in thrust direction time evolutions that cannot be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and turned out to be essential to the successful navigation of Dawn at Vesta.

  11. Thrust Direction Optimization: Satisfying Dawn's Attitude Agility Constraints

    NASA Technical Reports Server (NTRS)

    Whiffen, Gregory J.

    2013-01-01

    The science objective of NASA's Dawn Discovery mission is to explore the two largest members of the main asteroid belt, the giant asteroid Vesta and the dwarf planet Ceres. Dawn successfully completed its orbital mission at Vesta. The Dawn spacecraft has complex, difficult to quantify, and in some cases severe limitations on its attitude agility. The low-thrust transfers between science orbits at Vesta required very complex time varying thrust directions due to the strong and complex gravity and various science objectives. Traditional thrust design objectives (like minimum (Delta)V or minimum transfer time) often result in thrust direction time evolutions that can not be accommodated with the attitude control system available on Dawn. This paper presents several new optimal control objectives, collectively called thrust direction optimization that were developed and necessary to successfully navigate Dawn through all orbital transfers at Vesta.

  12. A new algorithm for agile satellite-based acquisition operations

    NASA Astrophysics Data System (ADS)

    Bunkheila, Federico; Ortore, Emiliano; Circi, Christian

    2016-06-01

    Taking advantage of the high manoeuvrability and the accurate pointing of the so-called agile satellites, an algorithm which allows efficient management of the operations concerning optical acquisitions is described. Fundamentally, this algorithm can be subdivided into two parts: in the first one the algorithm operates a geometric classification of the areas of interest and a partitioning of these areas into stripes which develop along the optimal scan directions; in the second one it computes the succession of the time windows in which the acquisition operations of the areas of interest are feasible, taking into consideration the potential restrictions associated with these operations and with the geometric and stereoscopic constraints. The results and the performances of the proposed algorithm have been determined and discussed considering the case of the Periodic Sun-Synchronous Orbits.

  13. Frequency Agile Transceiver for Advanced Vehicle Data Links

    NASA Technical Reports Server (NTRS)

    Freudinger, Lawrence C.; Macias, Filiberto; Cornelius, Harold

    2009-01-01

    Emerging and next-generation test instrumentation increasingly relies on network communication to manage complex and dynamic test scenarios, particularly for uninhabited autonomous systems. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. Frequency agility is one characteristic of reconfigurable radios that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate a promising chipset that performs conversion of RF signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit, programmable for any frequency band between 1 MHz and 6 GHz.

  14. AGILE follow-up of the neutrino ICECUBE-160731 event

    NASA Astrophysics Data System (ADS)

    Lucarelli, F.; Pittori, C.; Verrecchia, F.; Piano, G.; Munar-Adrover, P.; Bulgarelli, A.; Fioretti, V.; Zoli, A.; Tavani, M.; Donnarumma, I.; Vercellone, S.; Minervini, G.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Parmiggiani, N.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-08-01

    Following the GCN notice posted by the ICECUBE Collaboration on July 31, 2016, reporting the detection at T0=16/07/31 01:55:04 UT of a very high energy neutrino with reconstructed arrival direction pointing at RA, DEC (J2000)=(214.5440, -0.3347 [deg]) with a 90% containement radius of 45.00 arcmin (stat+sys), we searched for transient gamma-ray emission in the AGILE data above 100 MeV. Integrating over the 48 hours from 2016-07-29 02:00 UT to 2016-07-31 02:00 UT a maximum likelihood analysis yields a possible detection at a significance level of about 3 sigma with a flux F(E > 100 MeV)=(1.5 +/- 0.7)x 10^-06 ph/cm^2/s within the GCN/AMON_ICECUBE_HESE notice error region.

  15. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Johnston, Simon; Possenti, Andrea; Manchester, Dick; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2010-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  16. Pulsar timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Johnston, Simon; Possenti, Andrea; Manchester, Dick; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2010-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 20 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009).

  17. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Roberts, Mallory; Weltevrede, Patrick; Kerr, Matthew; Petroff, Emily; Brook, Paul

    2013-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 43 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford. Currently five students have active projects using the radio datasets.

  18. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2011-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  19. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2011-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  20. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2012-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 27 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group (submitted mid 2009) and Kyle Watters from Stanford.

  1. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Thorsett, Stephen; Roberts, Mallory; Weltevrede, Patrick

    2012-10-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 37 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford.

  2. Pulsar Timing and the Fermi and AGILE missions

    NASA Astrophysics Data System (ADS)

    Shannon, Ryan; Possenti, Andrea; Manchester, Dick; Johnston, Simon; Hobbs, George; Keith, Michael; Romani, Roger W.; Thompson, David J.; Roberts, Mallory; Weltevrede, Patrick; Brook, Paul

    2013-04-01

    We request time to observe 170 pulsars on a regular basis in order to provide accurate ephemerides necessary for the detection of gamma-ray pulsars with the Fermi and AGILE satellites. The main science goals are to increase the number of known gamma-ray pulsars (both radio loud and radio quiet), to determine accurate pulse profiles, to characterise their high energy spectra and phase resolved spectroscopy of the brightest pulsars. In the radio, the observations will also allow us to find glitches, characterise timing noise, investigate dispersion and rotation measure variability and enhance our knowledge of single pulse phenomenology. To date, we are (co-)authors on 37 papers arising from the collaboration and P574 data. The data have contributed to the PhD theses of Lucas Guillemot and Damien Parent from the Bordeaux Fermi group and Kyle Watters from Stanford. Currently for students have active projects using the radio datasets.

  3. Enhanced detection of terrestrial gamma-ray flashes by AGILE

    NASA Astrophysics Data System (ADS)

    Marisaldi, M.; Argan, A.; Ursi, A.; Gjesteland, T.; Fuschino, F.; Labanti, C.; Galli, M.; Tavani, M.; Pittori, C.; Verrecchia, F.; D'Amico, F.; Østgaard, N.; Mereghetti, S.; Campana, R.; Cattaneo, P. W.; Bulgarelli, A.; Colafrancesco, S.; Dietrich, S.; Longo, F.; Gianotti, F.; Giommi, P.; Rappoldi, A.; Trifoglio, M.; Trois, A.

    2015-11-01

    At the end of March 2015 the onboard software configuration of the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configuration change was highly successful resulting in an increase of one order of magnitude in TGF detection rate. As expected, the largest fraction of the new events has short duration (<100 μs), and part of them has simultaneous association with lightning sferics detected by the World Wide Lightning Location Network. The new configuration provides the largest TGF detection rate surface density (TGFs/km2/yr) to date, opening prospects for improved correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region.

  4. A new optical design for the BNL isotope production transport line

    SciTech Connect

    Kponou, A.; Alessi, J.G.; Raparia, D.; Mapes, M.; Tsoupas, N.

    1996-10-01

    The 200 MeV linac at BNL has recently been upgraded. As a result, 2.5 times more average beam current can be delivered to the Brookhaven Isotope Resource Center (BIRC), formerly called BLIP, a facility which produces radionuclides and radiopharmaceutical for the medical community, and also supports a research program seeking more effective diagnostic and therapeutic agents. The optics of the beam transport line to BIRC was redesigned to (a) reduce transverse fluctuations of the beam at the target due to any linac energy fluctuations, (b) produce a flat beam distribution at the target, in order to avoid melting certain target materials, and (c) handle the higher beam intensity while keeping radiation levels low. A profile monitor was also modified to monitor the flatness of the beam using the algebraic reconstruction technique (ART). The above improvements will be described, and results of the commissioning of the line during the 1996 running period will be discussed.

  5. Resonant Compton cooling and annihilation line production in gamma-ray bursts

    NASA Technical Reports Server (NTRS)

    Preece, R. D.; Harding, A. K.

    1992-01-01

    Attention is given to a synchrotron self-Compton emission model for gamma-ray bursts which produces narrow annihilation features for a variety of field strengths, primary electron injection energies, and injection rates. In this model, primary electrons are injected and cooled by synchrotron emission in a strong, homogeneous magnetic field, resulting in a pair cascade. Multiple resonant scattering with cyclotron photons efficiently traps and cools pairs in the ground state to an average energy where the Compton energy loss rate is zero, which is in agreement with previous estimates of a Compton temperature. The particle distributions in the ground state are determined by numerically solving the Fokker-Planck equation in the steady state. In the case of isotropic injection of primary electrons, a significant narrow-line feature appears in the overall emission. In the case of beamed injection, the annihilation line is broadened to the extent that it would not be observable.

  6. Field screening of sweet sorghum inbred lines for pest resistance and biomass production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Sweet sorghum [Sorghum bicolor (L.) Moench] is one of the favorable biofuel feedstocks for ethanol production. Fall armyworm [Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae)] is one of the most serious foliar-feeding insect pests in sorghum production in the southeastern US states. Sev...

  7. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... completed product for each serial of such product shall be tested for bacteria and fungi as prescribed in § 113.26 or § 113.27 (whichever is applicable). If bacteria or fungi are found in the MCS, the MCS shall not be used. If bacteria or fungi are found in a subculture, the subculture shall not be used. (e)...

  8. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... completed product for each serial of such product shall be tested for bacteria and fungi as prescribed in § 113.26 or § 113.27 (whichever is applicable). If bacteria or fungi are found in the MCS, the MCS shall not be used. If bacteria or fungi are found in a subculture, the subculture shall not be used. (e)...

  9. Chaste: using agile programming techniques to develop computational biology software.

    PubMed

    Pitt-Francis, Joe; Bernabeu, Miguel O; Cooper, Jonathan; Garny, Alan; Momtahan, Lee; Osborne, James; Pathmanathan, Pras; Rodriguez, Blanca; Whiteley, Jonathan P; Gavaghan, David J

    2008-09-13

    Cardiac modelling is the area of physiome modelling where the available simulation software is perhaps most mature, and it therefore provides an excellent starting point for considering the software requirements for the wider physiome community. In this paper, we will begin by introducing some of the most advanced existing software packages for simulating cardiac electrical activity. We consider the software development methods used in producing codes of this type, and discuss their use of numerical algorithms, relative computational efficiency, usability, robustness and extensibility. We then go on to describe a class of software development methodologies known as test-driven agile methods and argue that such methods are more suitable for scientific software development than the traditional academic approaches. A case study is a project of our own, Cancer, Heart and Soft Tissue Environment, which is a library of computational biology software that began as an experiment in the use of agile programming methods. We present our experiences with a review of our progress thus far, focusing on the advantages and disadvantages of this new approach compared with the development methods used in some existing packages. We conclude by considering whether the likely wider needs of the cardiac modelling community are currently being met and suggest that, in order to respond effectively to changing requirements, it is essential that these codes should be more malleable. Such codes will allow for reliable extensions to include both detailed mathematical models--of the heart and other organs--and more efficient numerical techniques that are currently being developed by many research groups worldwide. PMID:18565813

  10. Information Models, Data Requirements, and Agile Data Curation

    NASA Astrophysics Data System (ADS)

    Hughes, John S.; Crichton, Dan; Ritschel, Bernd; Hardman, Sean; Joyner, Ron

    2015-04-01

    The Planetary Data System's next generation system, PDS4, is an example of the successful use of an ontology-based Information Model (IM) to drive the development and operations of a data system. In traditional systems engineering, requirements or statements about what is necessary for the system are collected and analyzed for input into the design stage of systems development. With the advent of big data the requirements associated with data have begun to dominate and an ontology-based information model can be used to provide a formalized and rigorous set of data requirements. These requirements address not only the usual issues of data quantity, quality, and disposition but also data representation, integrity, provenance, context, and semantics. In addition the use of these data requirements during system's development has many characteristics of Agile Curation as proposed by Young et al. [Taking Another Look at the Data Management Life Cycle: Deconstruction, Agile, and Community, AGU 2014], namely adaptive planning, evolutionary development, early delivery, continuous improvement, and rapid and flexible response to change. For example customers can be satisfied through early and continuous delivery of system software and services that are configured directly from the information model. This presentation will describe the PDS4 architecture and its three principle parts: the ontology-based Information Model (IM), the federated registries and repositories, and the REST-based service layer for search, retrieval, and distribution. The development of the IM will be highlighted with special emphasis on knowledge acquisition, the impact of the IM on development and operations, and the use of shared ontologies at multiple governance levels to promote system interoperability and data correlation.

  11. Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

    NASA Astrophysics Data System (ADS)

    Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

    1994-09-01

    Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

  12. How Can Agile Practices Minimize Global Software Development Co-ordination Risks?

    NASA Astrophysics Data System (ADS)

    Hossain, Emam; Babar, Muhammad Ali; Verner, June

    The distribution of project stakeholders in Global Software Development (GSD) projects provides significant risks related to project communication, coordination and control processes. There is growing interest in applying agile practices in GSD projects in order to leverage the advantages of both approaches. In some cases, GSD project managers use agile practices to reduce project distribution challenges. We use an existing coordination framework to identify GSD coordination problems due to temporal, geographical and socio-cultural distances. An industry-based case study is used to describe, explore and explain the use of agile practices to reduce development coordination challenges.

  13. Chromosome elimination and in vivo haploid production induced by Stock 6-derived inducer line in maize (Zea mays L.).

    PubMed

    Zhang, Zili; Qiu, Fazhan; Liu, Yongzhong; Ma, Kejun; Li, Zaiyun; Xu, Shangzhong

    2008-12-01

    In vivo haploid production induced by inducer lines derived from Stock 6 is widely used in breeding program of maize (Zea mays L.), but the mechanisms behind have not yet been fully understood. In this study, average frequency of haploid induction in four inbred lines by Stock 6-derived inducer line HZI1 was above 10%. About 0.2% kernels from the cross Hua24 x HZI1 had mosaic endosperm showing yellow shrunken parts from Hua24 to normal parts with purple aleurone from HZI1. Individual lagged chromosomes and micronuclei were observed in mitotic cells of ovules pollinated by HZI1. Above 56.4% of the radicles from the kernels with purple aleurone and colorless embryos were mixoploid (2n = 9-21), and more than 45.22% cells were haploid cells (2n = 10) in three crosses. More than 62.5% of the radicles from the kernels with purple aleurone and purple embryos were mixoploid (2n = 9-21) having 54.27% cells with 2n = 20. SSR analysis showed that all haploids from the cross Hua24 x HZI1 shared the same genomic compositions as Hua24 except for plants Nos. 862 and 857 with some polymorphic DNA bands. The results revealed that chromosome elimination after fertilization caused the haploid production in maize. PMID:18807046

  14. Quantitative analysis of investment allocation over various resources of health care systems by using views of product lines

    NASA Astrophysics Data System (ADS)

    Tai, Guangfu; Williams, Peter

    2013-11-01

    Hospitals can be viewed as service enterprises, of which the primary function is to provide specific sets of diagnostic and therapeutic medical services to individual patients. Each patient has certain diagnosis and therapeutic attributes in common with some other patients. Thus, patients with similar medical attributes could be 'processed' in one 'product line' of medical services, and individual treatments for patients within one 'product line' can be regarded as incurring identical consumption of health care resources. This article presents a theoretical framing for resource planning and investment allocation of various resources from a macro perspective of costs that demonstrates the need to plan capacity at the disaggregated resource level. The result of a balanced line ('optimal') is compared with an alternative scheme of 'the same ratio composing of resources' under the same monetary constraints. Thus, it is demonstrated that planning at the disaggregated level affords much better use of resources than achieved in common practice of budget control by simple percentage increase/decrease in distributing a financial vote.

  15. 40 CFR 1048.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... the requirements of 40 CFR part 1048. We have not changed production processes or quality-control..., regardless of the procedure or type of equipment. (8) Provide the CumSum analysis required in § 1048.315...

  16. 40 CFR 1045.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... requirements of 40 CFR part 1045. We have not changed production processes or quality-control procedures for..., regardless of the procedure or type of engine. (8) Provide the CumSum analysis required in § 1045.315 and...

  17. 40 CFR 1045.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirements of 40 CFR part 1045. We have not changed production processes or quality-control procedures for..., regardless of the procedure or type of engine. (8) Provide the CumSum analysis required in § 1045.315 and...

  18. 40 CFR 1048.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... the requirements of 40 CFR part 1048. We have not changed production processes or quality-control..., regardless of the procedure or type of equipment. (8) Provide the CumSum analysis required in § 1048.315...

  19. 40 CFR 1045.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... requirements of 40 CFR part 1045. We have not changed production processes or quality-control procedures for..., regardless of the procedure or type of engine. (8) Provide the CumSum analysis required in § 1045.315 and...

  20. 40 CFR 1048.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... the requirements of 40 CFR part 1048. We have not changed production processes or quality-control..., regardless of the procedure or type of equipment. (8) Provide the CumSum analysis required in § 1048.315...

  1. 40 CFR 1048.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the requirements of 40 CFR part 1048. We have not changed production processes or quality-control... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION...

  2. 40 CFR 1045.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements of 40 CFR part 1045. We have not changed production processes or quality-control procedures for... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES...

  3. Detection and quantification of sulfur in oil products by laser-induced breakdown spectroscopy for on-line analysis

    NASA Astrophysics Data System (ADS)

    Trichard, F.; Forquet, V.; Gilon, N.; Lienemann, C.-P.; Baco-Antoniali, F.

    2016-04-01

    Determination of sulfur in petroleum products is described using Laser Induced breakdown spectroscopy (LIBS). A study of buffer gases employed to improve sulfur IR line detection is presented. Optimisation of the flow rate led to a 1.4 L/min optimal helium flow rate. An adaptation between a typical laboratory setup to a compact system allowed to obtain detection limits in the 0.2% w/w range. Calibration is made under the process conditions (70 °C) and at room temperature. Normalization with a helium emission line compensates for liquid level variations and for the temperature variations. The analysis of a sample over the course of 2 days under the conditions of the industrial process was tested and gave a good repeatability.

  4. Chemical inhibition of autophagy: Examining its potential to increase the specific productivity of recombinant CHO cell lines.

    PubMed

    Baek, Eric; Kim, Che Lin; Kim, Mi Gyeom; Lee, Jae Seong; Lee, Gyun Min

    2016-09-01

    Chinese hamster ovary (CHO) cells activate and undergo apoptosis and autophagy for various environmental stresses. Unlike apoptosis, studies on increasing the production of therapeutic proteins in CHO cells by targeting the autophagy pathway are limited. In order to identify the effects of chemical autophagy inhibitors on the specific productivity (qp ), nine chemical inhibitors that had been reported to target three different phases of autophagy (metformin, dorsomorphin, resveratrol, and SP600125 against initiation and nucleation; 3-MA, wortmannin, and LY294002 against elongation, and chloroquine and bafilomycin A1 against autophagosome fusion) were used to treat three recombinant CHO (rCHO) cell lines: the Fc-fusion protein-producing DG44 (DG44-Fc) and DUKX-B11 (DUKX-Fc) and antibody-producing DG44 (DG44-Ab) cell lines. Among the nine chemical inhibitors tested, 3-MA, dorsomorphin, and SP600125 significantly increased the qp of DG44-Fc and DUKX-Fc. In contrast, for DG44-Ab, only 3-MA significantly increased the qp . The autophagy-inhibiting activity of the nine chemical inhibitors on the rCHO cell lines was evaluated through Western blot analysis and flow cytometry. Unexpectedly, some chemical inhibitors did not exhibit any apparent inhibition activity on autophagy. The chemical inhibitors that enhanced the qp , 3-MA, dorsomorphin, and SP600125, exhibited instead an increased autophagic flux. Taken all together, the chemical inhibition of autophagy was not effective in increasing the qp in rCHO cell lines and the positive effect of 3-MA, dorsomorphin, and SP600125 on the qp was not due to the inhibition of autophagy. Biotechnol. Bioeng. 2016;113: 1953-1961. © 2016 Wiley Periodicals, Inc. PMID:26914152

  5. Cavity-Enhanced Frequency-Agile Rapid Scanning (fars) Spectroscopy: Measurement Principles

    NASA Astrophysics Data System (ADS)

    Hodges, Joseph T.; Long, David A.; Truong, Gar-Wing; Douglass, Kevin O.; Maxwell, Stephen E.; Zee, Roger Van; Plusquellic, David F.

    2013-06-01

    We present the principles of frequency-agile, rapid scanning (FARS) spectroscopy, a new technique for high-bandwidth, cavity-enhanced, laser absorption measurements. This method enables a visible or near-infrared probe laser beam to be frequency tuned over several tens of GHz using a microwave source, a waveguide phase modulator and a filter cavity. For the types of cavity-enhanced methods discussed here, the optical resonator itself is used to select a single sideband of the modulated laser spectrum, obviating the need for a separate filter cavity. FARS offers several important advantages over conventional cw laser tuning methods based on thermal or mechanical methods. These include, high speed tuning with sub-ms switching times, the ability to select arbitrary frequency steps or chirp rates, and the realization of a spectrum detuning axis with sub-kHz level precision. We discuss how FARS can be applied to cavity ring-down spectroscopy and other cavity-enhanced methods to enable rapid and accurate measurements of line parameters and to give noise-equivalent absorption coefficients at the 10^{-12} cm^{-1} Hz^{-1/2} level.

  6. The On Line Validation Exercise (OLIVE) Tool: a CEOS/LPV initiative for validation of global land products

    NASA Astrophysics Data System (ADS)

    Weiss, M.; Baret, F.; Block, T.; Koetz, B.; Burini, A.; Fernandes, R. A.; Nightingale, J. M.

    2012-12-01

    The OLIVE (On Line Interactive Validation Exercise) system enables transparent and traceable validation and inter-comparison of EO land products (LAI, FAPAR, FCOVER). The ultimate objective of OLIVE is to provide consistent and reliable information on the accuracy and associated uncertainty of EO products. The validation exercise follows the guidelines proposed by CEOS/LPV and allows for regular updates when new versions or products are available. OLIVE is accessible to the whole EO community which can run validation exercises, including existing or new products. The validation process involves several criterions listed hereafter: (i) continuity of products, i.e. evaluation of the spatial and temporal distribution of missing values,(ii) accuracy assessment achieved by comparing the product value derived from satellite observations to ground measurements of the corresponding biophysical variable (i.e. direct validation) (iii) precision assessment, mainly regarding the temporal and spatial consistency, including the long term temporal stability mandatory for several applications, and (iv) intercomparison between currently existing products. OLIVE is a web platform and provides three main functionalities: 1. Easy and transparent access to validation exercise results, including product definition, description of the validation process and associated data. 2. Evaluate new EO products/versions developed by any producer. Formats required for the candidate input product are described in details. The validation can be run in two modes: (i) the 'private' mode for which the validation results are only visible to this user. This mode is dedicated to perform tests when the product may not be mature enough for public scrutiny; (ii) the 'public' mode, for more mature products, where the results are published on the system and accessible to the community. In the latter case, the data used for the validation are stored on the system and available to the community for inter

  7. Flow injection analysis-based methodology for automatic on-line monitoring and quality control for biodiesel production.

    PubMed

    Pinzi, S; Priego Capote, F; Ruiz Jiménez, J; Dorado, M P; Luque de Castro, M D

    2009-01-01

    An automated on-line approach based on determination of free and bound glycerol was here proposed to monitor biodiesel production. The method was based on liquid-liquid extraction of glycerol from the biodiesel to an aqueous ethanolic phase in which glycerol is oxidized to formaldehyde with meta periodate with subsequent reaction with acetylacetone. The reaction product was photometrically measured at 410 nm. Free and bound glycerol were differentiated by glycerides hydrolysis with potassium ethylate. The experimental set-up consisted of a flow-injection manifold for liquid-liquid extraction without phase separation and iterative change of the flow direction that enabled: (a) filling the flow manifold with a meta periodate-acetylacetone acceptor phase; (b) sampling of small amounts (microl) from the reactor; (c) determination of free glycerol by extraction from biodiesel to the aqueous phase with simultaneous oxidation-reaction with acetylacetone in the acceptor phase; (d) continuous monitoring of the aqueous phase by passage through a photometric detector; (e) filling the flow manifold with a potassium ethylate-meta periodate-acetylacetone new acceptor phase; (d) repetition of steps b-to-d to determine total glycerol after saponification of the bound glycerol by potassium ethylate; and (f) determination of bound glycerol by difference between the second and first analyses. The results showed that the proposed automated on-line method is a suitable option in routine analysis during biodiesel production. PMID:18614358

  8. The role of evolutionarily conserved germ-line DH sequence in B-1 cell development and natural antibody production.

    PubMed

    Vale, Andre M; Nobrega, Alberto; Schroeder, Harry W

    2015-12-01

    Because of N addition and variation in the site of VDJ joining, the third complementarity-determining region of the heavy chain (CDR-H3) is the most diverse component of the initial immunoglobulin antigen-binding site repertoire. A large component of the peritoneal cavity B-1 cell component is the product of fetal and perinatal B cell production. The CDR-H3 repertoire is thus depleted of N addition, which increases dependency on germ-line sequence. Cross-species comparisons have shown that DH gene sequence demonstrates conservation of amino acid preferences by reading frame. Preference for reading frame 1, which is enriched for tyrosine and glycine, is created both by rearrangement patterns and by pre-BCR and BCR selection. In previous studies, we have assessed the role of conserved DH sequence by examining peritoneal cavity B-1 cell numbers and antibody production in BALB/c mice with altered DH loci. Here, we review our finding that changes in the constraints normally imposed by germ-line-encoded amino acids within the CDR-H3 repertoire profoundly affect B-1 cell development, especially B-1a cells, and thus natural antibody immunity. Our studies suggest that both natural and somatic selection operate to create a restricted B-1 cell CDR-H3 repertoire. PMID:26104486

  9. Canopy Photosynthesis and Its Relationship to Plant Productivity in Near-Isogenic Cotton Lines Differing in Leaf Morphology

    PubMed Central

    Wells, Randy; Meredith, William R.; Williford, J. Ray

    1986-01-01

    A 2-year study was conducted to determine the relationships between plant canopy photosynthesis, canopy light interception, and plant productivity of cotton (Gossypium hirsutum L.) exhibiting differing leaf morphologies. The near-isogenic lines were from a single background (MD 65-11) and represented the leaf shapes Normal (small leaf lobing), Sub-Okra (intermediate leaf lobing), Okra (large leaf lobing), and Super Okra (severe leaf lobing). The F1 of a cross Normal × Okra (intermediate leaf lobing) and the F2 (segregating 1:2:1 for Normal Sub-Okra, and Okra, respectively) were also grown. Reduced plant canopies were produced by Okra and Super Okra lines, which translated into increased light penetration to the ground, and hence, in reduced canopy photosynthesis. Integrated canopy photosynthesis (ICAP) was significantly associated with light interception by the plant canopy. Part of the remaining variability in ICAP was associated with confounding factors associated with plant maturity and other unmeasured genotypic factors. Intermediate (F1 and Sub-Okra) and normal leaf types displayed the largest ICAP values in both years. Lint production was positively related to ICAP (R2 = 0.53). The combination of high ICAP values and competitive lint yields indicate that intermediate lobed leaf morphologies offer promise as productive sources of physiological variation for cotton germplasm development. PMID:16665085

  10. Submillimeter bolt location in car bodywork for production line quality inspection

    NASA Astrophysics Data System (ADS)

    Altamirano-Robles, Leopoldo; Arias-Estrada, Miguel; Alviso-Quibrera, Samuel; Lopez-Lopez, Aurelio

    2000-03-01

    In the automotive industry, a vehicle begins with the construction of the vehicle floor. Later on, several robots weld a series of bolts to this floor which are used to fix other parts. Due to several problems, like welding tools wearing, robot miscalibration or momentary low power supply, among others, some bolts are incorrectly positioned or are not present at all, bringing problems and delays in the next work cells. Therefore, it is of importance to verify the quality of welded parts before the following assembly steps. A computer vision system is proposed in order to locate autonomously the presence and quality of the bolts. The system should carry on the inspection in real time at the car assembly line under the following conditions: without touching the bodywork, with a precision in the submillimeter range and in few seconds. In this paper we present a basic computer vision system for bolt location in the submillimeter range. We analyze three arrangements of the system components (camera and illumination sources) that produce different results in the localization. Results are presented and compared for the three approaches obtained under laboratory conditions. The algorithms were tested in the assembling line. Variations up to one millimeter in the welded position of the bolts were observed.

  11. DEATH LINE OF GAMMA-RAY PULSARS WITH OUTER GAPS

    SciTech Connect

    Wang, Ren-Bo; Hirotani, Kouichi E-mail: hirotani@tiara.sinica.edu.tw

    2011-08-01

    We analytically investigate the condition for a particle accelerator to be active in the outer magnetosphere of a rotation-powered pulsar. Within the accelerator (or the gap), the magnetic-field-aligned electric field accelerates electrons and positrons, which emit copious gamma-rays via the curvature process. If one of the gamma-rays emitted by a single pair materializes as a new pair on average, the gap is self-sustained. However, if the neutron-star spin-down rate decreases below a certain limit, the gap becomes no longer self-sustained and the gamma-ray emission ceases. We explicitly compute the multiplicity of cascading pairs and find that the obtained limit corresponds to a modification of the previously derived outer-gap death line. In addition to this traditional death line, we find another death line, which becomes important for millisecond pulsars, by separately considering the threshold of photon-photon pair production. Combining these traditional and new death lines, we give predictions on the detectability of gamma-ray pulsars with Fermi and AGILE. An implication for X-ray observations of heated polar-cap emission is also discussed.

  12. Examining Variation in Recombination Levels in the Human Female: A Test of the Production-Line Hypothesis

    PubMed Central

    Rowsey, Ross; Gruhn, Jennifer; Broman, Karl W.; Hunt, Patricia A.; Hassold, Terry

    2014-01-01

    The most important risk factor for human aneuploidy is increasing maternal age, but the basis of this association remains unknown. Indeed, one of the earliest models of the maternal-age effect—the “production-line model” proposed by Henderson and Edwards in 1968—remains one of the most-cited explanations. The model has two key components: (1) that the first oocytes to enter meiosis are the first ovulated and (2) that the first to enter meiosis have more recombination events (crossovers) than those that enter meiosis later in fetal life. Studies in rodents have demonstrated that the first oocytes to enter meiosis are indeed the first to be ovulated, but the association between the timing of meiotic entry and recombination levels has not been tested. We recently initiated molecular cytogenetic studies of second-trimester human fetal ovaries, allowing us to directly examine the number and distribution of crossover-associated proteins in prophase-stage oocytes. Our observations on over 8,000 oocytes from 191 ovarian samples demonstrate extraordinary variation in recombination within and among individuals but provide no evidence of a difference in recombination levels between oocytes entering meiosis early in fetal life and those entering late in fetal life. Thus, our data provide a direct test of the second tenet of the production-line model and suggest that it does not provide a plausible explanation for the human maternal-age effect, meaning that—45 years after its introduction—we can finally conclude that the production-line model is not the basis for the maternal-age effect on trisomy. PMID:24995869

  13. Integration of a linear accelerator into a production line of mechanically deboned separated poultry meat

    NASA Astrophysics Data System (ADS)

    Sadat, Theo; Volle, Christophe

    2000-03-01

    Linear accelerators, commonly called Linacs, are being used for different industrial processes. This kind of machine produces high power electron beams and can treat many products with a high throughput. The main application of a Linac is the sterilization of medical disposable devices, polymerization and decontamination of food products. Salmonella commonly contaminates poultry. Thanks to E-beam treatment, it eradicates the pathogen quickly and permits the use of meat that should have been thrown away because of its infection. The world's first Linac dedicated to treat mechanically deboned poultry meat is located in Brittany at the Société des Protéines Industrielles. It is a Thomson CSF Linac product, the CIRCE II, with an energy of 10 MeV and a power of 10 kW. This Linac has been used for more than 8 years, and its technology is fully proven.

  14. Transitioning from Distributed and Traditional to Distributed and Agile: An Experience Report

    NASA Astrophysics Data System (ADS)

    Wildt, Daniel; Prikladnicki, Rafael

    Global companies that experienced extensive waterfall phased plans are trying to improve their existing processes to expedite team engagement. Agile methodologies have become an acceptable path to follow because it comprises project management as part of its practices. Agile practices have been used with the objective of simplifying project control through simple processes, easy to update documentation and higher team iteration over exhaustive documentation, focusing rather on team continuous improvement and aiming to add value to business processes. The purpose of this chapter is to describe the experience of a global multinational company on transitioning from distributed and traditional to distributed and agile. This company has development centers across North America, South America and Asia. This chapter covers challenges faced by the project teams of two pilot projects, including strengths of using agile practices in a globally distributed environment and practical recommendations for similar endeavors.

  15. Geometric simulation analysis of multi-band mosaic imaging from the same orbit by agile satellites

    NASA Astrophysics Data System (ADS)

    Xu, Yue; Chen, Jinwei; Chen, Yueting; Xu, Zhihai; Feng, Huajun; Li, Qi

    2015-08-01

    This paper establishes a geometric model of multi-band mosaic imaging from the same orbit by agile satellites, and introduces a self-write simulation software. Geometric parameters of each band are calculated based on the attitude control ability of the satellite and the mission requirements. Considering the different ground resolution and the imaging angle of each band, two new concepts, Gradient Entropy and Structure Similarity Parameter are presented. These two values are used to evaluate the change of image quality caused by agility, and help to estimate the effect of the mission. By building the geometric model and calculating the agile information with the program, we propose a new approach of forward analysis of agile imaging, which helps users evaluate the image degradation.

  16. Requirement Changes and Project Success: The Moderating Effects of Agile Approaches in System Engineering Projects

    NASA Astrophysics Data System (ADS)

    Maierhofer, Sabine; Stelzmann, Ernst; Kohlbacher, Markus; Fellner, Björn

    This paper reports the findings of an empirical study on the influence agile development methods exert on the success of projects. The goal is to determine whether agile methods are able to mitigate negative effects requirement changes have on the performance of Systems Engineering projects, i.e. projects where systems consisting of hard- and software are developed. Agile methods have been proven to successfully support development projects in the field of traditional software engineering, but with an ever expending market of integrated systems manufacturers their usability for those complex projects has yet to be examined. This study focuses on 16 specific agile practices and their ability to improve the success of complex hard- and software projects.

  17. Renewed Gamma-Ray Emission from the blazar PKS 1510-089 Detected by AGILE

    NASA Astrophysics Data System (ADS)

    Munar-Adrover, P.; Pittori, C.; Bulgarelli, A.; Lucarelli, F.; Verrecchia, F.; Piano, G.; Fioretti, V.; Zoli, A.; Tavani, M.; Vercellone, S.; Minervini, G.; Striani, E.; Cardillo, M.; Gianotti, F.; Trifoglio, M.; Giuliani, A.; Mereghetti, S.; Caraveo, P.; Perotti, F.; Chen, A.; Argan, A.; Costa, E.; Del Monte, E.; Donnarumma, I.; Evangelista, Y.; Feroci, M.; Lazzarotto, F.; Lapshov, I.; Pacciani, L.; Soffitta, P.; Sabatini, S.; Vittorini, V.; Pucella, G.; Rapisarda, M.; Di Cocco, G.; Fuschino, F.; Galli, M.; Labanti, C.; Marisaldi, M.; Pellizzoni, A.; Pilia, M.; Trois, A.; Barbiellini, G.; Vallazza, E.; Longo, F.; Morselli, A.; Picozza, P.; Prest, M.; Lipari, P.; Zanello, D.; Cattaneo, P. W.; Rappoldi, A.; Colafrancesco, S.; Parmiggiani, N.; Ferrari, A.; Antonelli, A.; Giommi, P.; Salotti, L.; Valentini, G.; D'Amico, F.

    2016-09-01

    AGILE is currently detecting enhanced gamma-ray emission above 100 MeV from a source which position is consistent with the blazar PKS 1510-089. (the last activity of this source was reported in ATel #9350).

  18. On Production Mechanisms For Balmer Line Radiation From 'Cold' Atomic Hydrogen and Deuterium In Fusion Edge Plasmas

    SciTech Connect

    Hey, John Douglas

    2010-10-29

    Published arguments, which assign dominant roles to atomic metastability and molecular ion dissociation in the production of 'narrow' Zeeman component Balmer line radiation from the tokamak edge plasma, have been examined critically in relation to: l-redistribution by proton collisions, molecular ion-proton equipartition, and ion acceleration by the plasma sheath (scrape-off layer) potential. These processes are found to constrain the contributions from metastable atoms and from dissociative excitation of molecular ions to 'narrow' Balmer spectra emitted from the plasma edge, in relation to the corresponding contributions from electron impact-induced dissociative excitation of neutral molecules.

  19. A truly healthy bottom line: improving financial results through effective health and productivity programs.

    PubMed

    Wolff, Shelly

    2008-01-01

    Financially speaking, an effective, comprehensive, properly executed health and productivity (H&P) program can drive significant business results. Unfortunately, many companies are not getting the same return on their investments in H&P programs as their peers. This article defines program effectiveness and describes the specific activities of employers that have implemented successful H&P strategies leading to improved health, increased productivity and lower benefit costs-and, in turn, higher levels of performance, returns to shareholders and market premium. PMID:18590178

  20. Electron production by solar Ly-α line radiation in the ionospheric D-region

    NASA Astrophysics Data System (ADS)

    Nina, Aleksandra; Čadež, Vladimir M.

    2014-10-01

    The hydrogen Ly-α line has a dominant influence in photo-ionization processes in the unperturbed terrestrial ionospheric D region. In this paper, we present a procedure of calculating the rate of photo-ionization induced by Ly-α photons based on relaxation of electron density after intensive perturbations like those caused by solar X flares. This theory is applied to the ends of relaxation periods following three cases of solar X flares from May 5, 2010, February 18, 2011 and March 24, 2011. The necessary data on low ionospheric plasma parameters were collected by the very low frequency (VLF) radio-wave techniques. The electron concentration is calculated from the amplitude and phase of the VLF signal emitted by the DHO transmitter in Germany and recorded by a receiver located in Serbia.

  1. Vasopressin induced production of inositol trisphosphate and calcium efflux in a smooth muscle cell line

    SciTech Connect

    Doyle, V.M.; Rueegg, U.T.

    1985-08-30

    Phosphatidylinositol metabolism and /sup 45/Ca/sup 2 +/ efflux were examined in a vascular smooth muscle cell line (A7r5). (Arg 8)Vasopressin stimulated the rapid formation (measurable at 1 sec) of inositol phosphates in a concentration-dependent manner. The time course for formation of inositol phosphates was similar to that for /sup 45/Ca/sup 2 +/ efflux from preloaded cells. The efflux of /sup 45/Ca/sup 2 +/ in response to (Arg8)vasopressin could be inhibited by a vasopressin antagonist. This supports the hypothesis that inositol 1,4,5-trisphosphate plays a role in vasopressin stimulated calcium mobilization from an intracellular source in cultured vascular smooth muscle cells.

  2. HIGH SPEED REAL TIME REMOVAL OF UNDESIRABLE PRODUCT FROM FOOD PROCESSING LINES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Removal of undesirable defects and contaminants in food products is a concern for both food safety and food quality reasons. The presence of such materials is therefore a major component of quality grading standards. It can also have an effect on the accessibility of foreign markets and a producer...

  3. Academic Writers On-Line: Investigating Pausing in the Production of Text.

    ERIC Educational Resources Information Center

    Miller, Kristyan Spelman

    2000-01-01

    Describes an approach to the study of writing processes based on the analysis of temporal aspects of the writing event. The approach involves recording the keystroke presses made during production of a text using a word processor, and analyzing such features as pausing, fluency, and revision activity. (Author/VWL)

  4. 40 CFR 1048.310 - How must I select engines for production-line testing?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... the fifth test, the sample-size calculation does not allow you to stop testing. (2) The engine family does not comply according to § 1048.315. (3) You test 30 engines from the engine family. (4) You test... applicable emission standard. You may stop testing after you test one percent of your production volume...

  5. 40 CFR 1054.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ....-directed production volume and number of tests for each engine family. (3) Describe how you randomly... procedure and schedule you used. (6) Provide the test number; the date, time and duration of testing; test..., modification, repair, preparation, maintenance, or test for the test engine if you did not report it...

  6. 40 CFR 1045.345 - What production-line testing records must I send to EPA?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... total U.S.-directed production volume and number of tests for each engine family. (3) Describe how you... the procedure and schedule you used. (6) Provide the test number; the date, time and duration of... nonroutine adjustment, modification, repair, preparation, maintenance, or test for the test engine if you...

  7. Analysis of polymethoxylated flavones in citrus products by direct injection and in-line trace enrichment

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Analysis of the polymethoxylated flavones (PMFs) in citrus products has been of interest for chemotaxonomic studies and because of their biological activity. They only occur in the oil glands which are located in the peel flavedo of intact fruit. PMFs from the peel are incorporated into citrus juic...

  8. Health Effects of Cut Gas Lines and Other Petroleum Product Release Incidents - Seven States, 2010-2012.

    PubMed

    Anderson, Ayana R

    2015-06-12

    Large mass casualty gas explosions and catastrophic oil spills are widely reported and receive considerable regulatory attention. Smaller, less catastrophic petroleum product releases are less likely to receive publicity, although study of these incidents might help focus and prioritize prevention efforts. To describe the causes and health impacts of petroleum product release incidents (including gas explosions and oil spills), the Agency for Toxic Substances and Disease Registry (ATSDR) analyzed 2010-2012 data from the National Toxic Substance Incidents Program (NTSIP). A total of 1,369 petroleum product release incidents were reported from seven states, resulting in 512 injuries and 36 deaths. Approximately one fourth of the incidents were associated with utilities, and approximately one fifth were associated with private vehicles or residences. Approximately 10% of petroleum product releases resulted from inadvertent damage to utility lines. Understanding the characteristics of acute petroleum product releases can aid the public and utility workers in the development of preventive strategies and reduce the morbidity and mortality associated with such releases. PMID:26068562

  9. Balancing Plan-Driven and Agile Methods in Software Engineering Project Courses

    NASA Astrophysics Data System (ADS)

    Boehm, Barry; Port, Dan; Winsor Brown, A.

    2002-09-01

    For the past 6 years, we have been teaching a two-semester software engineering project course. The students organize into 5-person teams and develop largely web-based electronic services projects for real USC campus clients. We have been using and evolving a method called Model- Based (System) Architecting and Software Engineering (MBASE) for use in both the course and in industrial applications. The MBASE Guidelines include a lot of documents. We teach risk-driven documentation: if it is risky to document something, and not risky to leave it out (e.g., GUI screen placements), leave it out. Even so, students tend to associate more documentation with higher grades, although our grading eventually discourages this. We are always on the lookout for ways to have students learn best practices without having to produce excessive documentation. Thus, we were very interested in analyzing the various emerging agile methods. We found that agile methods and milestone plan-driven methods are part of a “how much planning is enough?” spectrum. Both agile and plan-driven methods have home grounds of project characteristics where they clearly work best, and where the other will have difficulties. Hybrid agile/plan-driven approaches are feasible, and necessary for projects having a mix of agile and plan-driven home ground characteristics. Information technology trends are going more toward the agile methods' home ground characteristics of emergent requirements and rapid change, although there is a concurrent increase in concern with dependability. As a result, we are currently experimenting with risk-driven combinations of MBASE and agile methods, such as integrating requirements, test plans, peer reviews, and pair programming into “agile quality management.”

  10. X-36 Tailless Fighter Agility Research Aircraft arrival at Dryden

    NASA Technical Reports Server (NTRS)

    1996-01-01

    NASA and McDonnell Douglas Corporation (MDC) personnel remove protective covers from the newly arrived NASA/McDonnell Douglas Corporation X-36 Tailless Fighter Agility Research Aircraft. It arrived at NASA Dryden Flight Research Center, Edwards, California, on July 2, 1996. The NASA/Boeing X-36 Tailless Fighter Agility Research Aircraft program successfully demonstrated the tailless fighter design using advanced technologies to improve the maneuverability and survivability of possible future fighter aircraft. The program met or exceeded all project goals. For 31 flights during 1997 at the Dryden Flight Research Center, Edwards, California, the project team examined the aircraft's agility at low speed / high angles of attack and at high speed / low angles of attack. The aircraft's speed envelope reached up to 206 knots (234 mph). This aircraft was very stable and maneuverable. It handled very well. The X-36 vehicle was designed to fly without the traditional tail surfaces common on most aircraft. Instead, a canard forward of the wing was used as well as split ailerons and an advanced thrust-vectoring nozzle for directional control. The X-36 was unstable in both pitch and yaw axes, so an advanced, single-channel digital fly-by-wire control system (developed with some commercially available components) was put in place to stabilize the aircraft. Using a video camera mounted in the nose of the aircraft and an onboard microphone, the X-36 was remotely controlled by a pilot in a ground station virtual cockpit. A standard fighter-type head-up display (HUD) and a moving-map representation of the vehicle's position within the range in which it flew provided excellent situational awareness for the pilot. This pilot-in-the-loop approach eliminated the need for expensive and complex autonomous flight control systems and the risks associated with their inability to deal with unknown or unforeseen phenomena in flight. Fully fueled the X-36 prototype weighed approximately 1

  11. On-line gas chromatographic analysis of Fischer-Tropsch synthesis products formed in a supercritical reaction medium

    SciTech Connect

    Snavely, K.; Subramaniam, B.

    1997-10-01

    C{sub 1}-C{sub 30} products from Fischer-Tropsch synthesis, conducted in a supercritical n-hexane medium over an Fe catalyst in a fixed-bed reactor, are analyzed using on-line gas chromatography. A Hewlett-Packard 5890 Series II gas chromatograph (GC) is modified to minimize the effects of condensation of the on-line sample in the transfer lines. The GC is configured with a Supelco Petrocol DH capillary column connected to a flame ionization detector (FID) and two 1.83 m {times} 3.18 mm stainless steel columns placed in series, packed with 80/100 mesh HayeSep D, connected to a thermal conductivity detector (TCD). It is shown that pressure and temperature affect the elution order of oxygenates relative to hydrocarbons in the nonpolar capillary column. This phenomenon is exploited for obtaining improved resolution; several distinct methods produce similar elution orders. Ar, added to the syngas feed, is used to calculate syngas conversion. All compounds eluting before hexane (C{sub 1}-C{sub 5}, other than 2-methylpropene/1-butene and propanal/propanone) and nearly all the major peaks eluting after hexane are resolved in the capillary column. H{sub 2}, Ar, CO, CH{sub 4}, CO{sub 2}, and H{sub 2}O are resolved in the packed columns. The method provides excellent quantitative measurement of component mole fractions that are within the range of calibration.

  12. Strength and agility training in adolescents with Down syndrome: a randomized controlled trial.

    PubMed

    Lin, Hsiu-Ching; Wuang, Yee-Pay

    2012-01-01

    The purpose of this study was to investigate the effects of a proposed strength and agility training program of adolescents with Down syndrome. Ninety-two adolescents were recruited and evenly randomized to two intervention groups (exercise group vs. control group). The mean age for the exercise and the control group was 10.6±3.2 and 11.2±3.5 respectively. The exercise training program consisted of a 5-min treadmill exercise and one 20-min virtual-reality based activity administered three times a week for 6 weeks. Pre- and post-test measures were taken for muscle strength and agility performance. The measured muscle included hip extensor, hip flexor, knee extensor, knee flexors, hip abductors, and ankle plantarflexor. A handheld dynamometer was used to measure the lower extremities muscle strength, and agility performance was assessed by the strength and agility subtests of the Bruininks-Oseretsky Test of Motor Proficiency-Second Edition. The exercise group had significant improvements in agility (p=0.02, d=0.80) and muscle strength of all muscle group (all p's<0.05, d=0.51-0.89) assessed in comparison to the control group after the 6-week intervention. Knee muscle groups including both flexors and extensors had the greatest gains among all the muscles measured. A short-term exercise training program used in this study is capable of improving muscle strength and agility performance of adolescents with DS. PMID:22820064

  13. Three `C's of Agile Practice: Collaboration, Co-ordination and Communication

    NASA Astrophysics Data System (ADS)

    Sharp, Helen; Robinson, Hugh

    The importance of collaboration, co-ordination and communication in agile teams is often discussed and rarely disputed. These activities are supported through various practices including pairing, customer collaboration, stand-ups and the planning game. However the mechanisms used to support these activities are sometimes more difficult to pin down. We have been studying agile teams for over a decade, and have found that story cards and the Wall are central to an agile team's activity, and the information they hold and convey is crucial for supporting the team's collaboration and co-ordination activity. However the information captured by these usually physical artefacts pertains mainly to progress rather than to functional dependencies. This latter information is fundamental to any software development, and in a non-agile environment is usually contained in detailed documentation not generally produced in an agile team. Instead, this information resides in their communication and social practices. In this chapter we discuss these three ‘C's of agile development and what we know about how they are supported through story cards and the Wall.

  14. Adopting best practices: "Agility" moves from software development to healthcare project management.

    PubMed

    Kitzmiller, Rebecca; Hunt, Eleanor; Sproat, Sara Breckenridge

    2006-01-01

    It is time for a change in mindset in how nurses operationalize system implementations and manage projects. Computers and systems have evolved over time from unwieldy mysterious machines of the past to ubiquitous computer use in every aspect of daily lives and work sites. Yet, disconcertingly, the process used to implement these systems has not evolved. Technology implementation does not need to be a struggle. It is time to adapt traditional plan-driven implementation methods to incorporate agile techniques. Agility is a concept borrowed from software development and is presented here because it encourages flexibility, adaptation, and continuous learning as part of the implementation process. Agility values communication and harnesses change to an advantage, which facilitates the natural evolution of an adaptable implementation process. Specific examples of agility in an implementation are described, and plan-driven implementation stages are adapted to incorporate relevant agile techniques. This comparison demonstrates how an agile approach enhances traditional implementation techniques to meet the demands of today's complex healthcare environments. PMID:16554690

  15. AGILE/GRID Science Alert Monitoring System: The Workflow and the Crab Flare Case

    NASA Astrophysics Data System (ADS)

    Bulgarelli, A.; Trifoglio, M.; Gianotti, F.; Tavani, M.; Conforti, V.; Parmiggiani, N.

    2013-10-01

    During the first five years of the AGILE mission we have observed many gamma-ray transients of Galactic and extragalactic origin. A fast reaction to unexpected transient events is a crucial part of the AGILE monitoring program, because the follow-up of astrophysical transients is a key point for this space mission. We present the workflow and the software developed by the AGILE Team to perform the automatic analysis for the detection of gamma-ray transients. In addition, an App for iPhone will be released enabling the Team to access the monitoring system through mobile phones. In 2010 September the science alert monitoring system presented in this paper recorded a transient phenomena from the Crab Nebula, generating an automated alert sent via email and SMS two hours after the end of an AGILE satellite orbit, i.e. two hours after the Crab flare itself: for this discovery AGILE won the 2012 Bruno Rossi prize. The design of this alert system is maximized to reach the maximum speed, and in this, as in many other cases, AGILE has demonstrated that the reaction speed of the monitoring system is crucial for the scientific return of the mission.

  16. In-line inspection of carbon anodes for use in aluminum production

    SciTech Connect

    Emad, F.; Haldemann, P.; Nispel, A.; Logan, L.

    1996-10-01

    In this paper, methods of measuring the quality of carbon anodes which are produced and continually consumed in the commercial production of aluminum are discussed. The electrical and mechanical qualities of these anodes are very important for the economic operation of the aluminum plant. At least six different ways of checking some of the most important anode characteristics were investigated, and those methods selected as the most suitable for testing the quality of the anodes are elaborated. Results from tests made at an aluminum reduction plant are included. Future work planned in this area is also discussed. The methods considered include: (1) direct resistivity measurement using core samples; (2) ultrasonic measurement; (3) hammer method; (4) Hall effect; (5) 4-probe method; (6) magnetic coils (various arrangements). It will be shown that some of these methods give inaccurate results while others are not practical due to operating conditions and/or production parameters.

  17. Modeling the Agility MLC in the Monaco treatment planning system.

    PubMed

    Snyder, Michael; Halford, Robert; Knill, Cory; Adams, Jeffrey N; Bossenberger, Todd; Nalichowski, Adrian; Hammoud, Ahmad; Burmeister, Jay

    2016-01-01

    We investigate the relationship between the various parameters in the Monaco MLC model and dose calculation accuracy for an Elekta Agility MLC. The vendor-provided MLC modeling procedure - completed first with external vendor participation and then exclusively in-house - was used in combination with our own procedures to investigate several sets of MLC modeling parameters to determine their effect on dose distributions and point-dose measurements. Simple plans provided in the vendor procedure were used to elucidate specific mechanical characteristics of the MLC, while ten complex treatment plans - five IMRT and five VMAT - created using TG-119-based structure sets were used to test clinical dosimetric effects of particular parameter choices. EDR2 film was used for the vendor fields to give high spatial resolution, while a combination of MapCHECK and ion chambers were used for the in-house TG-119-based proced-ures. The vendor-determined parameter set provided a reasonable starting point for the MLC model and largely delivered acceptable gamma pass rates for clinical plans - including a passing external evaluation using the IROC H&N phantom. However, the vendor model did not provide point-dose accuracy consistent with that seen in other treatment systems at our center. Through further internal testing it was found that there existed many sets of MLC parameters, often at opposite ends of their allowable ranges, that provided similar dosimetric characteristics and good agreement with planar and point-dose measurements. In particular, the leaf offset and tip leakage parameters compensated for one another if adjusted in opposite directions, which provided a level curve of acceptable parameter sets across all plans. Interestingly, gamma pass rates of the plans were less dependent upon parameter choices than point-dose measurements, suggesting that MLC modeling using only gamma evaluation may be generally an insufficient approach. It was also found that exploring all

  18. Frequency-Agile Differential Cavity Ring-Down Spectroscopy

    NASA Astrophysics Data System (ADS)

    Reed, Zachary; Hodges, Joseph

    2015-06-01

    The ultimate precision of highly sensitive cavity-enhanced spectroscopic measurements is often limited by interferences (etalons) caused by weak coupled-cavity effects. Differential measurements of ring-down decay constants have previously been demonstrated to largely cancel these effects, but the measurement acquisition rates were relatively low [1,2]. We have previously demonstrated the use of frequency agile rapid scanning cavity ring-down spectroscopy (FARS-CRDS) for acquisition of absorption spectra [3]. Here, the method of rapidly scanned, frequency-agile differential cavity ring-down spectroscopy (FADS-CRDS) is presented for reducing the effect of these interferences and other shot-to-shot statistical variations in measured decay times. To this end, an electro-optic phase modulator (EOM) with a bandwidth of 20 GHz is driven by a microwave source, generating pairs of sidebands on the probe laser. The optical resonator acts as a highly selective optical filter to all laser frequencies except for one tunable sideband. This sideband may be stepped arbitrarily from mode-to-mode of the ring-down cavity, at a rate limited only by the cavity buildup/decay time. The ability to probe any cavity mode across the EOM bandwidth enables a variety of methods for generating differential spectra. The differential mode spacing may be changed, and the effect of this method on suppressing the various coupled-cavity interactions present in the system is discussed. Alternatively, each mode may also be differentially referenced to a single point, providing immunity to temporal variations in the base losses of the cavity while allowing for conventional spectral fitting approaches. Differential measurements of absorption are acquired at 3.3 kHz and a minimum detectable absorption coefficient of 5 x10-12 cm-1 in 1 s averaging time is achieved. 1. J. Courtois, K. Bielska, and J.T Hodges J. Opt. Soc. Am. B, 30, 1486-1495, 2013 2. H.F. Huang and K.K. Lehmann App. Optics 49, 1378

  19. Selective accumulation of germ-line associated gene products in early development of the sea star and distinct differences from germ-line development in the sea urchin

    PubMed Central

    Fresques, Tara; Zazueta-Novoa, Vanesa; Reich, Adrian; Wessel, Gary M.

    2014-01-01

    Background Echinodermata is a diverse Phylum, a sister group to chordates, and contains diverse organisms that may be useful to understand varied mechanisms of germ-line specification. Results We tested 23 genes in development of the sea star Patiria miniata that fall into five categories: 1) Conserved germ-line factors; 2) Genes involved in the inductive mechanism of germ-line specification; 3) Germ-line associated genes; 4) Molecules involved in left-right asymmetry; and 5) Genes involved in regulation and maintenance of the genome during early embryogenesis. Overall, our results support the contention that the posterior enterocoel is a source of the germ line in the sea star P. miniata. Conclusion The germ line in this organism appears to be specified late in embryogenesis, and in a pattern more consistent with inductive interactions amongst cells. This is distinct from the mechanism seen in sea urchins, a close relative of the sea star clad. We propose that P. miniata may serve as a valuable model to study inductive mechanisms of germ-cell specification and when compared to germ-line formation in the sea urchin S. purpuratus may reveal developmental transitions that occur in the evolution of inherited and inductive mechanisms of germ-line specification. PMID:24038550

  20. The Effects of Pre-Task Planning and On-line Planning on Fluency, Complexity, and Accuracy in L2 Monologic Oral Production.

    ERIC Educational Resources Information Center

    Yuan, Fangyuan; Ellis, Rod

    2003-01-01

    Investigated the effects of both pre-task and on-line planning on second language (L2) oral production. Results show that pre-task planning enhances grammatical complexity while on-line planning positively influences accuracy and grammatical complexity. Pre-task planners also produced more fluent and lexically varied language than the on-line…