Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza
Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API. PMID:24250689
Rajabzadeh Ghatari, Ali; Mehralian, Gholamhossein; Zarenezhad, Forouzandeh; Rasekh, Hamid Reza
Agility is the fundamental characteristic of a supply chain needed for survival in turbulent markets, where environmental forces create additional uncertainty resulting in higher risk in the supply chain management. In addition, agility helps providing the right product, at the right time to the consumer. The main goal of this research is therefore to promote supplier selection in pharmaceutical industry according to the formative basic factors. Moreover, this paper can configure its supply network to achieve the agile supply chain. The present article analyzes the supply part of supply chain based on SCOR model, used to assess agile supply chains by highlighting their specific characteristics and applicability in providing the active pharmaceutical ingredient (API). This methodology provides an analytical modeling; the model enables potential suppliers to be assessed against the multiple criteria using both quantitative and qualitative measures. In addition, for making priority of critical factors, TOPSIS algorithm has been used as a common technique of MADM model. Finally, several factors such as delivery speed, planning and reorder segmentation, trust development and material quantity adjustment are identified and prioritized as critical factors for being agile in supply of API.
Babazadeh, Reza; Razmi, Jafar; Ghodsi, Reza
The characteristics of today's competitive environment, such as the speed with which products are designed, manufactured, and distributed, and the need for higher responsiveness and lower operational cost, are forcing companies to search for innovative ways to do business. The concept of agile manufacturing has been proposed in response to these challenges for companies. This paper copes with the strategic and tactical level decisions in agile supply chain network design. An efficient mixed-integer linear programming model that is able to consider the key characteristics of agile supply chain such as direct shipments, outsourcing, different transportation modes, discount, alliance (process and information integration) between opened facilities, and maximum waiting time of customers for deliveries is developed. In addition, in the proposed model, the capacity of facilities is determined as decision variables, which are often assumed to be fixed. Computational results illustrate that the proposed model can be applied as a power tool in agile supply chain network design as well as in the integration of strategic decisions with tactical decisions.
Yusuf, Yahaya Y.; Adeleye, E. O.; Sivayoganathan, K.
Turbulent change caused by factors such as changing customer and technological requirements threatens manufacturers through lower product life cycles, profits and bleak survival prospects. Therefore, several companies are stressing flexibility and agility in order to respond, real time, to the unique needs of customers and markets. However, the resource competencies required are often difficult to mobilise and retain by single companies. It is therefore imperative for companies to co-operate and leverage complementary competencies. To this end, legally separate and spatially distributed companies are becoming integrated through Internet-based technologies. The paper reviews emerging patterns in supply chain integration. It also explores the relationship between the emerging patterns and attainment of competitive objectives. The results reported in the paper are based on data from a survey by questionnaire. The survey involved 600 companies in the UK, as part of a larger study of agile manufacturing. The study was driven by a conceptual model, which relates supply chain practices to competitive objectives. The analysis involves the use of factor analysis to reduce research variables to a few principal components. Subsequently, multiple regression was conducted to study the relationship amongst the reduced variables. The results validate the proposed conceptual model and lend credence to current thinking that supply chain integration is a vital tool for competitive advantage.
Zimmerman, Rolf; Gallagher, Pat
This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.
Lee, Hau L
Building a strong supply chain is essential for business success. But when it comes to improving their supply chains, few companies take the right approach. Many businesses work to make their chains faster or more cost-effective, assuming that those steps are the keys to competitive advantage. To the contrary: Supply chains that focus on speed and costs tend to deteriorate over time. The author has spent 15 years studying more than 60 companies to gain insight into this and other supply chain dilemmas. His conclusion: Only companies that build supply chains that are agile, adaptable, and aligned get ahead of their rivals. All three components are essential; without any one of them, supply chains break down. Great companies create supply chains that respond to abrupt changes in markets. Agility is critical because in most industries, both demand and supply fluctuate rapidly and widely. Supply chains typically cope by playing speed against costs, but agile ones respond both quickly and cost-efficiently. Great companies also adapt their supply networks when markets or strategies change. The best supply chains allow managers to identify structural shifts early by recording the latest data, filtering out noise, and tracking key patterns. Finally, great companies align the interests of the partners in their supply chains with their own. That's important because every firm is concerned solely with its own interests. If its goals are out of alignment with those of other partners in the supply chain, performance will suffer. When companies hear about the triple-A supply chain, they assume that building one will require increased technology and investment. But most firms already have the infrastructure in place to create one. A fresh attitude alone can go a long way toward making it happen.
Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans
Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.
Five hallmarks of an effective supply chain are: A strong relationship is developed with a single GPO. Physicians are involved in supply standardization. Supply contracts are routinely reviewed at time of renewal. Freight costs are understood and negotiated effectively. Products are distributed through an in-house distribution center.
This article describes an assessment methodology based on the supply chain proficiency model that can be used to set realistic supply chain objectives. The assessment centers on a business model that identifies the logical stages of supply chain proficiency as measured against a comprehensive set of business characteristics. For each characteristic, an enterprise evolves from one stage to the next. The magnitude of change inherent in moving forward usually prohibits skipping stages. Although it is possible to be at different stages for each characteristic, it is usually desirable to maintain balance.
Varadharajulu, P.; Azeem Saqiq, M.; Yu, F.; McMeekin, D. A.; West, G.; Arnold, L.; Moncrieff, S.
This paper describes current research into the supply of spatial data to the end user in as close to real time as possible via the World Wide Web. The Spatial Data Infrastructure paradigm has been discussed since the early 1990s. The concept has evolved significantly since then but has almost always examined data from the perspective of the supplier. It has been a supplier driven focus rather than a user driven focus. The current research being conducted is making a paradigm shift and looking at the supply of spatial data as a supply chain, similar to a manufacturing supply chain in which users play a significant part. A comprehensive consultation process took place within Australia and New Zealand incorporating a large number of stakeholders. Three research projects that have arisen from this consultation process are examining Spatial Data Supply Chains within Australia and New Zealand and are discussed within this paper.
functions within and across organizations (CSCMP, 2005). Mentzer et al. (2001) characterize SCM as a philosophy that includes a systems approach with...150 vi LIST OF TABLES Table 2.1. Prominent Supply Chain Related System Theory...process. It is not a matter of a supply chain system encountering a problem, but rather a matter of when a problematic event will occur and how severe
Quiett, William F.; Sealing, Scott L.
The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.
The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.
Palevich, R F
This article describes how Do It Best Corp. has used technology to improve its supply chain management. Among other topics it discusses the company's use of electronic data interchange, the Internet, electronic forecasting, and warehouse management systems to gain substantial savings and increase its competitiveness.
As the development of complex manufacturing models and virtual companies become more prevalent in today's growing global markets, it is increasingly important to support the relationships between manufacturer and supplier. Utilising these relationships will ensure that supply chains operate more effectively and reduce costs, risks and time-to-market time frames, whilst maintaining product quality.
Feistritzer, N R; Keck, B R
Faced with declining revenues and increasing operating expenses, hospitals are evaluating numerous mechanisms designed to reduce costs while simultaneously maintaining quality care. Many facilities have targeted initial cost reduction efforts in the reduction of labor expenses. Once labor expenses have been "right sized," facilities have continued to focus on service delivery improvements by the optimization of the "supply chain" process. This report presents a case study of the efforts of Vanderbilt University Medical Center in the redesign of its supply chain management process in the department of Perioperative Services. Utilizing a multidisciplinary project management structure, 3 work teams were established to complete the redesign process. To date, the project has reduced costs by $2.3 million and enhanced quality patient care by enhancing the delivery of appropriate clinical supplies during the perioperative experience.
Supply Chain Interoperability Measurement DISSERTATION June 2015 Christos E. Chalyvidis, Major, Hellenic Air ...Force AFIT-ENS-DS-15-J-001 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force...are those of the author and do not reflect the official policy or position of the United States Air Force, Department of Defense, or the United
Effective management of the supply chain requires attention to: Product management--formulary development and maintenance, compliance, clinical involvement, standardization, and demand-matching. Sourcing and contracting--vendor consolidation, GPO portfolio management, price leveling, content management, and direct contracting Purchasing and payment-cycle--automatic placement, web enablement, centralization, evaluated receipts settlement, and invoice matching Inventory and distribution management--"unofficial" and "official" locations, vendor-managed inventory, automatic replenishment, and freight management.
Brennan, C D
Today's integrated delivery systems (IDSs) require efficient supply chain processes to speed products to users at the lowest possible cost. Most excess costs within the supply chain are a result of inefficient and redundant processes involved in the transport and delivery of supplies from suppliers to healthcare providers. By integrating and assuming control of these supply chain processes, improving supply chain management practices, and organizing and implementing a disciplined redesign plan, IDSs can achieve substantial savings and better focus their organizations on their core patient care mission.
Wyrick, Steven; Cordaro, Joseph; Founds, Nanette; Chambellan, Curtis
Savannah River Site plays a critical role in the Tritium Production Supply Chain for the National Nuclear Security Administration (NNSA). The entire process includes: • Production of Tritium Producing Burnable Absorber Rods (TPBARs) at the Westinghouse WesDyne Nuclear Fuels Plant in Columbia, South Carolina • Production of unobligated Low Enriched Uranium (LEU) at the United States Enrichment Corporation (USEC) in Portsmouth, Ohio • Irradiation of TPBARs with the LEU at the Tennessee Valley Authority (TVA) Watts Bar Reactor • Extraction of tritium from the irradiated TPBARs at the Tritium Extraction Facility (TEF) at Savannah River Site • Processing the tritium at the Savannah River Site, which includes removal of nonhydrogen species and separation of the hydrogen isotopes of protium, deuterium and tritium.
Smith, B Gail
This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.
Realizing at last that supply chain management can produce efficiencies and save costs, hospitals are beginning to adopt practices from other industries, such as the concept of extended supply chains, to improve product flow. They're also investing in enterprise planning resource software, radio frequency identification and other technologies, using quality data to drive standardization and streamlining processes.
Valluri, Annapurna; North, Michael J; Macal, Charles M
Effective management of supply chains creates value and can strategically position companies. In practice, human beings have been found to be both surprisingly successful and disappointingly inept at managing supply chains. The related fields of cognitive psychology and artificial intelligence have postulated a variety of potential mechanisms to explain this behavior. One of the leading candidates is reinforcement learning. This paper applies agent-based modeling to investigate the comparative behavioral consequences of three simple reinforcement learning algorithms in a multi-stage supply chain. For the first time, our findings show that the specific algorithm that is employed can have dramatic effects on the results obtained. Reinforcement learning is found to be valuable in multi-stage supply chains with several learning agents, as independent agents can learn to coordinate their behavior. However, learning in multi-stage supply chains using these postulated approaches from cognitive psychology and artificial intelligence take extremely long time periods to achieve stability which raises questions about their ability to explain behavior in real supply chains. The fact that it takes thousands of periods for agents to learn in this simple multi-agent setting provides new evidence that real world decision makers are unlikely to be using strict reinforcement learning in practice.
Trimble, Jay Phillip
This is based on a previous talk on agile development. Methods for delivering software on a short cycle are described, including interactions with the customer, the affect on the team, and how to be more effective, streamlined and efficient.
Narayanan, V G; Raman, Ananth
Most companies don't worry about the behavior of their supply chain partners. Instead, they expect the supply chain to work efficiently without interference, as if guided by Adam Smith's famed invisible hand. In their study of more than 50 supply networks, V.G. Narayanan and Ananth Raman found that companies often looked out for their own interests and ignored those of their network partners. Consequently, supply chains performed poorly. Those results aren't shocking when you consider that supply chains extend across several functions and many companies, each with its own priorities and goals. Yet all those functions and firms must pull in the same direction for a chain to deliver goods and services to consumers quickly and cost-effectively. According to the authors, a supply chain works well only if the risks, costs, and rewards of doing business are distributed fairly across the network. In fact, misaligned incentives are often the cause of excess inventory, stock-outs, incorrect forecasts, inadequate sales efforts, and even poor customer service. The fates of all supply chain partners are interlinked: If the firms work together to serve consumers, they will all win. However, they can do that only if incentives are aligned. Companies must acknowledge that the problem of incentive misalignment exists and then determine its root cause and align or redesign incentives. They can improve alignment by, for instance, adopting revenue-sharing contracts, using technology to track previously hidden information, or working with intermediaries to build trust among network partners. It's also important to periodically reassess incentives, because even top-performing networks find that changes in technology or business conditions alter the alignment of incentives.
Slone, Reuben E
Just five years ago, salespeople at Whirlpool were in the habit of referring to their supply chain organization as the "sales disablers." Now the company excels at getting products to the right place at the right time--while managing to keep inventories low. How did that happen? In this first-person account, Reuben Slone, Whirlpool's vice president of Global Supply Chain, describes how he and his colleagues devised the right supply chain strategy, sold it internally, and implemented it. Slone insisted that the right focal point for the strategy was the satisfaction of consumers at the end of the supply chain. Most supply chain initiatives do the opposite: They start with the realities of a company's manufacturing base and proceed from there. Through a series of interviews with trade customers large and small, his team identified 27 different capabilities that drove industry perceptions of Whirlpool's performance. Knowing it was infeasible to aim for world-class performance across all of them, Slone weighed the costs of excelling at each and found the combination of initiatives that would provide overall competitive advantage. A highly disciplined project management office and broad training in project management were key to keeping work on budget and on benefit. Slone set an intense pace--three "releases" of new capabilities every month--that the group maintains to this day. Lest this seem like a technology story, however, Slone insists it is just as much a "talent renaissance." People are proud today to be part of Whirlpool's supply chain organization, and its new generation of talent will give the company a competitive advantage for years to come.
Beth, Scott; Burt, David N; Copacino, William; Gopal, Chris; Lee, Hau L; Lynch, Robert Porter; Morris, Sandra
Supply chain management is all about software and systems, right? Put in the best technology, sit back, and watch as your processes run smoothly and the savings roll in? Apparently not. When HBR convened a panel of leading thinkers in the field of supply chain management, technology was not top of mind. People and relationships were the dominant issues of the day. The opportunities and problems created by globalization, for example, are requiring companies to establish relationships with new types of suppliers. The ever-present pressure for speed and cost containment is making it even more important to break down stubbornly high internal barriers and establish more effective cross-functional relationships. The costs of failure have never been higher. The leading supply chain performers are applying new technology, new innovations, and process thinking to far greater advantage than the laggards, reaping tremendous gains in all the variables that affect shareholder value: cost, customer service, asset productivity, and revenue generation. And the gap between the leaders and the losers is growing in almost every industry. This roundtable gathered many of the leading thinkers and doers in the field of supply chain management, including practitioners Scott Beth of Intuit, Sandra Morris of Intel, and Chris Gopal of Unisys. David Burt of the University of San Diego and Stanford's Hau Lee bring the latest research from academia. Accenture's William Copacino and the Warren Company's Robert Porter Lynch offer the consultant's perspectives. Together, they take a wide-ranging view of such topics as developing talent, the role of the chief executive, and the latest technologies, exploring both the tactical and the strategic in the current state of supply chain management.
Chandra, Charu; Grabis, Janis
Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.
Yousefi, Nazila; Alibabaei, Ahmad
Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.
Apply to the Climate Leadership Award for Supply Chain Leadership, which publicly recognizes organizations that are are at the leading edge of managing greenhouse gas emissions in their organizational supply chains.
Yousefi, Nazila; Alibabaei, Ahmad
Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead. PMID:26664401
Hundreds of millions of people are affected by disasters each year. This thesis explores the use of supply chain management techniques to overcome...academic, organizational, and contemporary literature. Possible solutions to these barriers were selected from available supply chain management...literature. This work is different from others in that it marries supply chain principles from different disciplines (including private, nonprofit, and
Sense, Andrew J.; Clements, Michael D. J.
This paper introduces and explains a conception of supply chains from a situated learning perspective. This non-conventional supply chain perspective invites the reader to consider supply chain scenarios as "situated learning opportunities involving multiple communities of practice" interacting and participating together. It is argued that by…
Lindskog, Magnus; Abrahamsson, Mats; Aronsson, Hakan
Contemporary supply chains are vastly complex, and decisions made by actors have system-wide consequences that these might not be able to foresee. There are gaps between "best practice"-founded theory and actual practice in supply chains. To remedy this, we argue, the supply chain actors need to enhance systems knowledge. There is a need to…
U.S. companies and increased the brittleness of those chains ( Pettit , Fiksel, and Croxton, 2010; Giunipero and Eltantawy, 2004). Attempts to minimize...management. According to Pettit , Fiksel, and Croxton (2010:6), a supply chain is “the network of companies involved in the upstream and downstream...comprise a supply chain and the effects of an uncertain external environment, supply chains are vulnerable to disruption ( Pettit , Fiksel,and Croxton
Trienekens, Jacques; Wognum, Nel
This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented.
To optimize supply chain performance and achieve savings that enhance the bottom line, hospitals should: Generate purchase orders for every item purchased. Ensure the organization is protected from undue vendor influence. Keep track of where supply chain dollars are going. Review contracts regularly to ensure competitiveness. Have a contract for each product category. Buy only what the organization is sure to use. Get rid of excess inventory. Develop a strategic plan for continued supply chain savings.
APPAREL RESEARCH NETWORK (ARN) PROGRAM Final Technical Report Contract Number SP0103-02-D-0018/ Delivery Order 0003 ARN Supply Chain Management...3. REPORT TYPE AND DATES COVERED Technical Report – 27 February 2003 to 30 June 2006 4. TITLE AND SUBTITLE ARN Supply Chain Management System for...Module (IRM), Clothing Initial Issue Point (CIIP); Supply Chain Management; Virtual Item Manager/Wholesale Local; Quality Logistics Management
Supply chain collaboration has received increasing attention from scholars and practitioners in recent years. However, our understanding of how enterprise information technology facilitates supply chain collaboration is still very limited, especially with regard to Chinese enterprise ownerships such as state-owned firms, joint-venture firms and local village-owned firms. This paper extends the theory established in enterprise information technology (IT) and supply chain collaboration literature and relates it with coordination in China-linked supply chain. Drawing upon an empirical study from 177 Chinese companies, we provide three major findings: (i) uncovered the importance of leveraging enterprise IT through supply chain collaboration; (ii) identified the relationship between enterprise ownership and enterprise technology use and supply chain collaboration in China-linked supply chain and (iii) illustrated effects of supply chain collaborative activities on operational and market performance.
the potential to capitalize on more efficient and effective management of their respective supply chains . Supply Chain Management (SCM) is the...transformation efforts have the potential to create a more agile, flexible and resilient supply chain that is responsive to Commanders and sensitive to...optimizing their supply chain to remain viable and create competitive advantage. Supply Chain Management (SCM) is grounded in the field of logistics
for firms to be managed as a complete system ; therefore an initial phase in SCM involves creating a vision for all members of the supply chain and...between supply chain orientation (SCO), supply chain management ( SCM ), collaboration, and the effects of those concepts on firm performance are of...previous research however there is a distinction between SCO and SCM . SCO is the manifestation of the supply chain mindset within the firm, while SCM
Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young
Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…
Buddress, L; Raedels, A
At a recent conference, the keynote speaker provoked an incredulous response when he said, "Today, competition among individual firms is dead." He then went on to explain that today, competition is supply chain against supply chain. Whichever firm has the superior supply chain will win out in the marketplace. Given the global marketplace in which we all operate, most of us would agree that his statements are true. How does a firm establish a world-class supply base? What kinds of contracts and agreements are necessary to support the diverse requirements of today's firms? How should a firm select from among the available contract types? These are foundation questions for supply chain management.
Nishioka, Y.; Kasai, F.; Kamio, Y.
This paper deals with dynamic supply chain configuration problems for one-of-a-kind production (OKP) environment. We propose an architecture named SUPREME, which supports collaborative planning and scheduling for web-based virtual enterprises. In this architecture, each system is located on the site of the network members as well as on the site of the supply chain coordinator, who performs as an agent configuring and managing the supply chain dynamically. A prototype system of SUPREME is developed and illustrated in order to evaluate effectiveness of the proposed architecture.
Davis, Janice L; Doyle, Robert
Economic challenges compel pediatric perioperative departments to reduce nonlabor supply costs while maintaining the quality of patient care. Optimization of the supply chain introduces a framework for decision making that drives fiscally responsible decisions. The cost-effective supply chain is driven by implementing a value analysis process for product selection, being mindful of product sourcing decisions to reduce supply expense, creating logistical efficiency that will eliminate redundant processes, and managing inventory to ensure product availability. The value analysis approach is an analytical methodology for product selection that involves product evaluation and recommendation based on consideration of clinical benefit, overall financial impact, and revenue implications.
Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril
Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.
Online form to show your company desires to be a Green Suppliers Network supply chain. Expresses an intent to: commit to engage at least five suppliers to complete an assessment process within a 12-month period and more.
Gumus, Mehmet; Love, Ernie C.
This article introduces an exercise that simulates the negotiation process in a dynamic supply chain. The retailer and wholesaler roles are assigned to student groups who negotiate supply contracts in a number of rounds during a class period. Each group makes pricing, inventory, and ordering decision concurrently, and competes with others to…
lean manufacturing coupled with the improvements in information management eventually resulted in the processes of supply chain management. With regard to supplies, once a company knew where their, inbound materials were because of the linkages of computer systems, had a guaranteed date of delivery from an information-enabled distribution
Introduction Supply of medicine as a strategic product in any health system is a top priority. Pharmaceutical companies, a major player of the drug supply chain, are subject to many risks. These risks disrupt the supply of medicine in many ways such as their quantity and quality and their delivery to the right place and customers and at the right time. Therefore risk identification in the supply process of pharmaceutical companies and mitigate them is highly recommended. Objective In this study it is attempted to investigate pharmaceutical supply chain risks with perspective of manufacturing companies. Methods Scopus, PubMed, Web of Science bibliographic databases and Google scholar scientific search engines were searched for pharmaceutical supply chain risk management studies with 6 different groups of keywords. All results found by keywords were reviewed and none-relevant articles were excluded by outcome of interests and researcher boundaries of study within 4 steps and through a systematic method. Results Nine articles were included in the systematic review and totally 50 main risks based on study outcome of interest extracted which classified in 7 categories. Most of reported risks were related to supply and supplier issues. Organization and strategy issues, financial, logistic, political, market and regulatory issues were in next level of importance. Conclusion It was shown that the majority of risks in pharmaceutical supply chain were internal risks due to processes, people and functions mismanagement which could be managed by suitable mitigation strategies. PMID:24355166
Fornasiero, Rosanna; Tescaro, Mauro; Scarso, Enrico; Gottardi, Giorgio
The Lean approach has been implemented in many different sectors as a methodology to improve industrial performance at company level. In the latest years this approach has been further developed in literature and in practice to integrate the principles of agility, adaptability and the mass customization paradigm where product and services have to be designed together to meet specific requirements, and where value originated by the supply chain enhance the value of single company thanks to the use of ICT and remote control. In this paper we analyze the Beyond-Lean paradigm and propose a path for companies in the footwear sector to improve their performance based on high-value-added products and processes. A detailed process analysis based on Value Stream Mapping is used to define criticalities and suggest improvements paths both at technological and organizational level.
Graham, J; Brewer, M S; Byrd, V T
At the University of Louisville (Ky) Hospital, staff members from the materials management and surgery departments have worked together to automate the supply chain. The goals were to remove supply activities from clinical staff members whenever possible, obtain and apply information for better product ordering and use, reduce personnel in the materials management department, and improve perioperative nurses' ability to obtain supplies--all at a decreased cost to the facility. This article describes how, after implementing point-of-service technology for all surgical supplies, the facility realized a cost-per-procedure savings of 16% and increased satisfaction among staff members in both departments.
Qrunfleh, Sufian M.
Over the past decade, an important focus of researchers has been on supply chain management (SCM), as many organizations believe that effective SCM is the key to building and sustaining competitive advantage for their products/services. To manage the supply chain, companies need to adopt an SCM strategy (SCMS) and implement appropriate SCM…
Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin
Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652
Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin
Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.
Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel
One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives.
An emerging area in supply chain practice is green supply chain management, which integrates environmental management with traditional supply chain management...GreenSCOR is the solution to closing this gap. GreenSCOR is a modification of version 5.0 of the Supply Chain Operations Reference (SCOR...model developed by the Supply - Chain Council (SCC). LMI used SCOR as a foundation because it has been proven over several years of continual development
Driven by the Energy and Independence Act of 2007 mandate to increase production of alternative fuels and to ensure that this increase causes minimal environmental impact, a project to design sustainable biofuel supply chains has been developed. This effort uses life cycle asses...
The Office of Research and Development within the U.S. Environmental Protection Agency (EPA) has recently put forth a new vision for environmental protection that states that sustainability is our “True North”. In support of this new vision, an effort to design supply chains to ...
Recent advances in the science and technology of global supply chain management offer near-real-time demand-response systems for decision-makers across production networks. Technology is helping propel "fast fashion" and "lean manufacturing," so that companies are better able to deliver products consumers want most. Yet companies know much less about the environmental and social impacts of their production networks. The failure to measure and manage these impacts can be explained in part by limitations in the science of sustainability measurement, as well as by weaknesses in systems to translate data into information that can be used by decision-makers inside corporations and government agencies. There also remain continued disincentives for firms to measure and pay the full costs of their supply chain impacts. I discuss the current state of monitoring, measuring, and analyzing information related to supply chain sustainability, as well as progress that has been made in translating this information into systems to advance more sustainable practices by corporations and consumers. Better data, decision-support tools, and incentives will be needed to move from simply managing supply chains for costs, compliance, and risk reduction to predicting and preventing unsustainable practices.
Rao, Kandukuri Narayana; Subbaiah, Kambagowni Venkata; Singh, Ganja Veera Pratap
Nowadays, customer expectations are increasing and organizations are prone to operate in an uncertain environment. Under this uncertain environment, the ultimate success of the firm depends on its ability to integrate business processes among supply chain partners. Supply chain management emphasizes cross-functional links to improve the competitive strategy of organizations. Now, companies are moving from decoupled decision processes towards more integrated design and control of their components to achieve the strategic fit. In this paper, a new approach is developed to design a multi-echelon, multi-facility, and multi-product supply chain in fuzzy environment. In fuzzy environment, mixed integer programming problem is formulated through fuzzy goal programming in strategic level with supply chain cost and volume flexibility as fuzzy goals. These fuzzy goals are aggregated using minimum operator. In tactical level, continuous review policy for controlling raw material inventories in supplier echelon and controlling finished product inventories in plant as well as distribution center echelon is considered as fuzzy goals. A non-linear programming model is formulated through fuzzy goal programming using minimum operator in the tactical level. The proposed approach is illustrated with a numerical example.
Parker, Jeff; DeLay, Dan
To achieve savings in the healthcare supply chain, healthcare organizations need to cooperate instead of compete. By forming a consolidated service center (CSC), healthcare organizations can centralize their contracting, procurement, distribution, and logistical operations. The CSC would enable organizations to improve efficiency and reduce costs.
McHugh, Thomas M
Between 15 and 45 percent of a clinical laboratory's operating budget is spent on supplies. Given the size of this expenditure, laboratory managers must pay close attention to the supply chain and develop effective strategies to manage their inventory. Areas that need analysis include the carrying cost of supplies, the cost to generate a purchase order, methods to efficiently count supplies on hand, processes to ensure that lot number items are used before their expiration, and detailed analysis of the inventory. At the University of California-San Francisco Medical Center, we investigated options to manage our inventory and implemented a computerized system. The system required modifications to existing practices, which initially seemed unwieldy. However, after a relatively short learning curve, the improvement to operations has been significant, with a reduction in wasted reagents, fewer staff hours used to count supplies, and the ability to provide prompt analysis of the inventory for audits and discussions with administration. Focusing on the supply chain has allowed us to reduce inventory expenses by approximately 8 percent, reduce waste, given us a more focused understanding of our operations, and provided us with the ability to analyze our inventory easily.
Svanberg, Martin; Olofsson, Ingemar; Flodén, Jonas; Nordin, Anders
The objective of the present work was to develop a techno-economic system model to evaluate how logistics and production parameters affect the torrefaction supply chain costs under Swedish conditions. The model consists of four sub-models: (1) supply system, (2) a complete energy and mass balance of drying, torrefaction and densification, (3) investment and operating costs of a green field, stand-alone torrefaction pellet plant, and (4) distribution system to the gate of an end user. The results show that the torrefaction supply chain reaps significant economies of scale up to a plant size of about 150-200 kiloton dry substance per year (ktonDS/year), for which the total supply chain costs accounts to 31.8 euro per megawatt hour based on lower heating value (€/MWhLHV). Important parameters affecting total cost are amount of available biomass, biomass premium, logistics equipment, biomass moisture content, drying technology, torrefaction mass yield and torrefaction plant capital expenditures (CAPEX).
Davis, Steven J; Peters, Glen P; Caldeira, Ken
CO(2) emissions from the burning of fossil fuels are conventionally attributed to the country where the emissions are produced (i.e., where the fuels are burned). However, these production-based accounts represent a single point in the value chain of fossil fuels, which may have been extracted elsewhere and may be used to provide goods or services to consumers elsewhere. We present a consistent set of carbon inventories that spans the full supply chain of global CO(2) emissions, finding that 10.2 billion tons CO(2) or 37% of global emissions are from fossil fuels traded internationally and an additional 6.4 billion tons CO(2) or 23% of global emissions are embodied in traded goods. Our results reveal vulnerabilities and benefits related to current patterns of energy use that are relevant to climate and energy policy. In particular, if a consistent and unavoidable price were imposed on CO(2) emissions somewhere along the supply chain, then all of the parties along the supply chain would seek to impose that price to generate revenue from taxes collected or permits sold. The geographical concentration of carbon-based fuels and relatively small number of parties involved in extracting and refining those fuels suggest that regulation at the wellhead, mine mouth, or refinery might minimize transaction costs as well as opportunities for leakage.
Davis, Steven J.; Peters, Glen P.; Caldeira, Ken
CO2 emissions from the burning of fossil fuels are conventionally attributed to the country where the emissions are produced (i.e., where the fuels are burned). However, these production-based accounts represent a single point in the value chain of fossil fuels, which may have been extracted elsewhere and may be used to provide goods or services to consumers elsewhere. We present a consistent set of carbon inventories that spans the full supply chain of global CO2 emissions, finding that 10.2 billion tons CO2 or 37% of global emissions are from fossil fuels traded internationally and an additional 6.4 billion tons CO2 or 23% of global emissions are embodied in traded goods. Our results reveal vulnerabilities and benefits related to current patterns of energy use that are relevant to climate and energy policy. In particular, if a consistent and unavoidable price were imposed on CO2 emissions somewhere along the supply chain, then all of the parties along the supply chain would seek to impose that price to generate revenue from taxes collected or permits sold. The geographical concentration of carbon-based fuels and relatively small number of parties involved in extracting and refining those fuels suggest that regulation at the wellhead, mine mouth, or refinery might minimize transaction costs as well as opportunities for leakage. PMID:22006314
Kongar, N. Elif
Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.
Wildgoose, Nick; Brennan, Patrick; Thompson, Simon
Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.
Mack, Miriam; Dittmer, Patrick; Veigt, Marius; Kus, Mehmet; Nehmiz, Ulfert; Kreyenschmidt, Judith
The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production. PMID:24797136
Mack, Miriam; Dittmer, Patrick; Veigt, Marius; Kus, Mehmet; Nehmiz, Ulfert; Kreyenschmidt, Judith
The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production.
Setola, Roberto; De Maggio, Maria Carla
The food supply chain could became a dangerous weapon in the hands of enemies, for this reason the strategies developed to fight food adulteration (food safety) should be complemented with specific actions devoted to improve food "security" in the sense of food defence. This paper illustrate the methodological approach used in the EU project SecuFood to analyze threats, vulnerabilities and countermeasures existing in major European countries about what concerns deliberate attacks and manipulations of food.
Renewable fuel is receiving an increasing attention as a substitute for fossil based energy. The US Department of Energy (DOE) has employed increasing effort on promoting the advanced biofuel productions. Although the advanced biofuel remains at its early stage, it is expected to play an important role in climate policy in the future in the transportation sector. This dissertation studies the emerging biofuel supply chain and markets by analyzing the production cost, and the outcomes of the biofuel market, including blended fuel market price and quantity, biofuel contract price and quantity, profitability of each stakeholder (farmers, biofuel producers, biofuel blenders) in the market. I also address government policy impacts on the emerging biofuel market. The dissertation is composed with three parts, each in a paper format. The first part studies the supply chain of emerging biofuel industry. Two optimization-based models are built to determine the number of facilities to deploy, facility locations, facility capacities, and operational planning within facilities. Cost analyses have been conducted under a variety of biofuel demand scenarios. It is my intention that this model will shed light on biofuel supply chain design considering operational planning under uncertain demand situations. The second part of the dissertation work focuses on analyzing the interaction between the key stakeholders along the supply chain. A bottom-up equilibrium model is built for the emerging biofuel market to study the competition in the advanced biofuel market, explicitly formulating the interactions between farmers, biofuel producers, blenders, and consumers. The model simulates the profit maximization of multiple market entities by incorporating their competitive decisions in farmers' land allocation, biomass transportation, biofuel production, and biofuel blending. As such, the equilibrium model is capable of and appropriate for policy analysis, especially for those policies
The DoD Supply Chain Management Implementation Guide is a tool to assist logistics personnel who are responsible for implementing supply chain management...This Guide presents the key supply chain principles and implementation strategies compiled into a structured and workable approach for achieving...progress toward fully incorporating supply chain management into the DoD logistics process. This document is Intended to serve as a roadmap for
Digital Equipment Corporation evaluates global supply chain alternatives and determines worldwide manufacturing and distribution strategy, using the...Global Supply Chain Model (GSCM) which recommends a production, distribution, and vendor network. GSCM minimizes cost or weighted cumulative...for supply chains with arbitrary echelon structure and a comprehensive model of integrated global manufacturing and distribution decisions. The supply chain restructuring has saved over $100 million (US).
The management of the supply chain is a matter of delicate balance. This is certainly due to its position at the crossroads between suppliers and users requirements, as well as logistic, financial and technical regulations. For a public organisation like EFS, whose annual budget amounts to 697 million euros, there is a lot at stake: supplies represent the second most important item of its budget accounting for 38% of annual expenses. Three quarters of the purchases concern basic activities such as blood collection, testing procedures, transformation and distribution of blood products. The last quarter is spent on more general activities (computer systems, telecommunications...). Professionalisation of the purchasing function has grown since the creation of the government-owned organisation as a single national unit (EFS) in the year 2000. Its consequences can be felt especially in the field of the "core activities". The current stage consists in maintaining close links between all the skills necessary to a high-quality supply chain. The latter will undoubtedly be beneficial to the medical, technical and support departments of EFS, which are the in-house customers to satisfy.
Watkins, Jennifer H; MacKerrow, Edward P; Merritt, Terence M
This paper outlines an opium supply chain using the Hilmand province of Afghanistan as exemplar. The opium supply chain model follows the transformation of opium poppy seed through cultivation and chemical alteration to brown heroin base. The purpose of modeling and simulating the Afghanistan-Pakistan opium supply chain is to discover and test strategies that will disrupt this criminal enterprise.
Lutz, Heather; Vang, David O.; Raffield, William D.
The motivation for this research was to understand under what conditions supply chain cooperation might be feasible and under what circumstances it is not. Whereas previous research focuses on dyads in a supply chain, our research seeks to examine a possible factor that can explain why truly cooperative supply chains involving more than two firms…
Davis, Robert N
To optimize supply-chain performance, hospitals must: Take into account all elements of the supply chain; Decide who will lead the supply-chain improvement effort; Decide where to focus improvement initiatives; Assess the savings potential; Overcome barriers to success; Set appropriate targets and measure performance.
This report seeks to provide an organized, analytical approach to identifying and bounding uncertainties around offshore wind manufacturing and supply chain capabilities; projecting potential component-level supply chain needs under three demand scenarios; and identifying key supply chain challenges and opportunities facing the future U.S. market and current suppliers of the nation’s landbased wind market.
Brandeau, Margaret L; Hutton, David W; Owens, Douglas K; Bravata, Dena M
Responses to bioterrorism require rapid procurement and distribution of medical and pharmaceutical supplies, trained personnel, and information. Thus, they present significant logistical challenges. On the basis of a review of the manufacturing and service supply chain literature, the authors identified five supply chain strategies that can potentially increase the speed of response to a bioterrorism attack, reduce inventories, and save money: effective supply chain network design; effective inventory management; postponement of product customization and modularization of component parts; coordination of supply chain stakeholders and appropriate use of incentives; and effective information management. The authors describe how concepts learned from published evaluations of manufacturing and service supply chains, as well as lessons learned from responses to natural disasters, naturally occurring outbreaks, and the 2001 US anthrax attacks, can be applied to design, evaluate, and improve the bioterrorism response supply chain. Such lessons could also be applied to the response supply chains for disease outbreaks and natural and manmade disasters.
Saleh, Chairul; Fatcha Mubiena, Ghaida; Immawan, Taufiq; Hassan, Azmi
Supply Chain Operation Reference (SCOR) is a method to measure supply chain serving the business process framework, performance indicators and unique technologies to support communication and collaboration among supply chain partners. The objective of this paper is to measure Supply Chain Management performance by using SCOR version 11.0 for production typology of MTS-MTO in Indonesian Batik Industry. This research combines SCOR's model and System Dynamics in order to predict the complex activities on batik industry. The hybrid SCOR-SD could identify the interaction among five attributes with the associated variables simultaneously. The results are obtained after the performance of lean production application is increased and the targets are achieved, even exceeding the target. For reliability attributes that associated with perfect order fulfilment started from 2015 to 2019 respectively are calculated as 80.06%, 103.53%, 105.58%, 93.76%, and 72.17%. Responsiveness attributes associated with the order fulfilment cycle time, respectively 122.45%, 149.10%, 159.26%, 131.53%, and 119.36%. Attributes associated with the total cost of service charge respectively 93.46%, 93.53%, 93.45%, 93.49, and 93.49%. Attributes associated with cash management assets to cash cycle time in a row were 160%, 153%, 146.3%, 150%, and 126.7%. The latter attribute is agility attributes associated with supply chain flexibility upside respectively 100%, 87.2%, 100%, 82%, and 82%.
Sun, Amy Cha-Tien; Downes, Paula Sue; Heinen, Russell; Welk, Margaret Ellen
Analysis of chemical supply chains is an inherently complex task, given the dependence of these supply chains on multiple infrastructure systems (e.g., the petroleum sector, transportation, etc.). This effort requires data and information at various levels of resolution, ranging from network-level distribution systems to individual chemical reactions. Sandia National Laboratories (Sandia) has integrated its existing simulation and infrastructure analysis capabilities with chemical data models to analyze the chemical supply chains of several nationally critical chemical commodities. This paper describes how Sandia models the ethylene supply chain; that is, the supply chain for the most widely used raw material for plastics production including a description of the types of data and modeling capabilities that are required to represent the ethylene supply chain. The paper concludes with a description of Sandia's use the model to project how the supply chain would be affected by and adapt to a disruptive scenario hurricane.
Pouly, Michel; Naciri, Souleiman; Berthold, Sébastien
ERP systems provide information management and analysis to industrial companies and support their planning activities. They are currently mostly based on theoretical values (averages) of parameters and not on the actual, real shop floor data, leading to disturbance of the planning algorithms. On the other hand, sharing data between manufacturers, suppliers and customers becomes very important to ensure reactivity towards markets variability. This paper proposes software solutions to address these requirements and methods to automatically capture the necessary corresponding shop floor information. In order to share data produced by different legacy systems along the collaborative networked supply chain, we propose to use the Generic Product Model developed by Hitachi to extract, translate and store heterogeneous ERP data.
Al-Turki, U. M.; Duffuaa, S.; Ayar, T.; Demirel, O.
Supply chain management principles have emerged in the last decade as a strategic option to meet new challenges in global business environment. Viewing business environment as part of a chain, starting from raw material suppliers to end customers passing by producers, is at the heart of supply-chain management. Many management principles have…
Zhang, Jihui; Xu, Junqin
Supply chain is a special kind of complex network. Its complexity and uncertainty makes it very difficult to control and manage. Supply chains are faced with a rising complexity of products, structures, and processes. Because of the strong link between a supply chain’s complexity and its efficiency the supply chain complexity management becomes a major challenge of today’s business management. The aim of this paper is to quantify the complexity and organization level of an industrial network working towards the development of a ‘Supply Chain Network Analysis’ (SCNA). By measuring flows of goods and interaction costs between different sectors of activity within the supply chain borders, a network of flows is built and successively investigated by network analysis. The result of this study shows that our approach can provide an interesting conceptual perspective in which the modern supply network can be framed, and that network analysis can handle these issues in practice.
This paper introduces the background, the content, the information management system of material supply chain integration management and the consumables management process. The system helps to expand the selection of hospital supplies varieties, to reduce consumables management costs, to improve the efficiency of supplies, to ensure supplies safety, reliability and traceability.
Supply Chain Management are key processes for military logistics in the future, however the Army and DoD has done little to educate officers in these concepts and processes. This monograph describes distribution and supply chain management, and discusses the essential skills and knowledge a logistics officer must have to function effectively in a supply chain and distribution management environment. It analyzes how officers should attain these skills using the three pillars of leader development in Department of the Army Pamphlet
The global supply chain is the network of suppliers, manufacturing centers, warehouses, distribution centers, and retail outlets that transforms raw... supply - chain security-the consequences of an attack on or via a critical global port could be a tremendous loss of life and a crippling of the U.S...measured? This report presents a strategy for answering these questions using methods for managing risk of large-scale systems to analyze the structure of the container supply chain and its properties.
Beer, Anja; Dickmann, Eva; Dickmann, Philipp; Gerth, Wolf-Michael; Graßy, Mario; Herron, Colin; Schmidt, Peter; Seidl, Florian; Wittmann, Claus-Eduard
Nach Schätzungen von Mercer Management Consulting und dem Fraunhofer Institut wird der Wertschöpfungsanteil in der Automobilindustrie von durchschnittlich 35 % im Jahr 2002 auf 23 % im Jahr 2015 sinken [Merc 04]. Der Trend, die Produktionstiefe oder allgemeiner, die Wertschöpfungstiefe, zu reduzieren, hat zur Folge, dass die Kaufteile den größeren Teil der Wertschöpfung einnehmen. Die Optimierungspotentiale und der Einfluss auf die Kosten wandern immer mehr zu den Lieferanten, vor allem bei größeren Unternehmen oder Konzernen. Lieferanten-Philosophien, die auf oberflächlichen Verbindungen zu Lieferanten aufbauen, um immer optimal und schnell den günstigsten Teilepreis zu erhalten, haben sich in vielen Sparten oder Produktbereichen, z. B. im Maschinenbau, im besten Fall als kurzfristig erfolgreich erwiesen. Kooperative und nachhaltige Strategien sind der erfolgversprechendere Weg, zumindest mittelbis langfristig. In der Realität wird sehr wenig in Supply Chain-Konzepte investiert und die Umsetzungen sind daher vielmals oberflächlich.
Janssen, S.; Schmitt, K.; Blanke, M.; Bauersfeld, M. L.; Wöllenstein, J.; Lang, W.
Ethylene is a gaseous ripening phytohormone of fruits and plants. Presently, ethylene is primarily measured with stationary equipment in laboratories. Applying in situ measurement at the point of natural ethylene generation has been hampered by the lack of portable units designed to detect ethylene at necessary resolutions of a few parts per billion. Moreover, high humidity inside controlled atmosphere stores or containers complicates the realization of gas sensing systems that are sufficiently sensitive, reliable, robust and cost efficient. In particular, three measurement principles have shown promising potential for fruit supply chains and were used to develop independent mobile devices: non-dispersive infrared spectroscopy, miniaturized gas chromatography and electrochemical measurement. In this paper, the measurement systems for ethylene are compared with regard to the needs in fruit logistics; i.e. sensitivity, selectivity, long-term stability, facilitation of automated measurement and suitability for mobile application. Resolutions of 20–10 ppb can be achieved in mobile applications with state-of-the-art equipment, operating with the three methods described in the following. The prices of these systems are in a range below €10 000. PMID:24797138
McLaren, Tim; Head, Milena; Yuan, Yufei
Discusses collaboration as a recent trend in supply chain management (SCM) that focuses on joint planning, coordination, and process integration between suppliers, customers, and other partners in a supply chain. Analyzes alternative information systems approaches for supporting collaborative SCM, including phone, fax, or email systems; Web-based…
... HUMAN SERVICES Food and Drug Administration Secure Supply Chain Pilot Program AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA or the Agency) is announcing the start of the Secure Supply Chain Pilot Program (SSCPP). The SSCPP is intended to assist FDA in...
This article focuses on the security risk in the container supply chain. It provides an overview of the technical and policy initiatives that are being implemented by international organizations, governments, and the private sector to enhance security in the container supply chain.
The U.S. EPA’s Office of Research and Development has introduced a program to study the environmental impacts and sustainability of biofuel supply chains. Analyses will provide indicators and metrics for valuating sustainability. In this context, indicators are supply chain rat...
Acquisition decisions drive supply - chain requirements that incur financial costs and other critical impacts. To account properly for the resource...operational scenario. This research uses economic input/output analysis to model the Department of Defense supply chain to estimate the fully burdened cost
Neureuther, Brian D.; O'Neill, Kevin
One of the most difficult challenges for an undergraduate supply chain management program at smaller universities is to create an environment of sustainability. Supply chain management is not at the tip of tongue for many graduating high school students and few undergraduate curriculums require a course in the content area. This research addresses…
Wu, Teresa; Blackhurst, Jennifer
The concept of an integrated or synthesized supply chain is a strategy for managing today's globalized and customer driven supply chains in order to better meet customer demands. Synthesizing individual entities into an integrated supply chain can be a challenging task due to a variety of factors including conflicting objectives, mismatched incentives and constraints of the individual entities. Furthermore, understanding the effects of disruptions occurring at any point in the system is difficult when working toward synthesizing supply chain operations. Therefore, the goal of this research is to present a modeling methodology to manage the synthesis of a supply chain by linking hierarchical levels of the system and to model and analyze disruptions in the integrated supply chain. The contribution of this research is threefold: (1) supply chain systems can be modeled hierarchically (2) the performance of synthesized supply chain system can be evaluated quantitatively (3) reachability analysis is used to evaluate the system performance and verify whether a specific state is reachable, allowing the user to understand the extent of effects of a disruption.
Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.
Das, Sujit; Warren, Josh; West, Devin; Schexnayder, Susan M.
This analysis identifies key opportunities in the carbon fiber supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas — wind energy, aerospace, automotive, and pressure vessels — that top the list of industries using carbon fiber and carbon fiber reinforced polymers. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.
Supply Chains Aruna Apte, John Khawam, Eva Regnier, Jay Simon, and Daniel Nussbaum Naval Postgraduate School Published April 1, 2013 Approved for...Fully-Burdened Cost of Supply in Self-Sustaining Logistics Networks Eva Regnier, Jay Simon, Daniel Nussbaum, Aruna Apte, and John Khawam Naval...Response Supply Chains Aruna Apte, John Khawam, Eva Regnier, Jay Simon, and Daniel Nussbaum Naval Postgraduate School Lead Time Demand Modeling in
Volk, Eugen; Müller, Marcus; Jacob, Ansger; Racz, Peter; Waldburger, Martin
Food supply chains today are characterized by fixed trade relations with long term contracts established between heterogeneous supply chain companies. Production and logistics capacities of these companies are often utilized in an economically inefficient manner only. In addition, increased consumer awareness in food safety issues renders supply chain management even more challenging, since integrated tracking and tracing along the whole food supply chain is needed. Facing these issues of supply chain management complexity and completely documented product quality, this paper proposes a full lifecycle solution for dynamic capacity markets based on concepts used in the field of Grid , like management of Virtual Organization (VO) combined with Service Level Agreement (SLA). The solution enables the cost-efficient utilization of real world capacities (e.g., production capacities or logistics facilities) by using a simple, browser-based portal. Users are able to enter into product-specific negotiations with buyers and suppliers of a food supply chain, and to obtain real-time access to product information including SLA evaluation reports. Thus, business opportunities in wider market access, process innovation, and trustworthy food products are offered for participating supply chain companies.
This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate "environmental thinking" into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain under uncertainties. All models are mixed integer programs, which also involves multi-objective programming method and two-stage/multistage stochastic programming methods. In particular for the long-term sequential planning under uncertainties, to reduce the computational challenges due to the exponential expansion of the scenario tree, I also developed efficient ND-Max method which is more efficient than CPLEX and Nested Decomposition method. Through result analysis of four independent studies, it is found that the proposed modeling frameworks can effectively improve the economic performance, enhance environmental benefits and reduce risks due to systems uncertainties for the biofuel supply chain systems.
PETERSEN,MARJORIE B.; CHAPMAN,LEON D.
The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise supply chain collaboration development methodology. The goal of this methodology is to enable a supply chain to work more efficiently and competitively. The outcomes of this methodology include: (1) A definitive description and evaluation of the role of business cultures and supporting business organizational structures in either inhibiting or fostering change to a more competitive supply chain; (2) ``As-Is'' and proposed ``To-Be'' supply chain business process models focusing on information flows and decision-making; and (3) Software tools that enable and support a transition to a more competitive supply chain, which results form a business driven rather than technologically driven approach to software design. This methodology development will continue in FY00 as DAMA engages companies in the soft goods industry in supply chain research and implementation of supply chain collaboration.
Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment.
Today's business climate requires supply chains to be proactive rather than reactive, which demands a new approach that incorporates data mining predictive analytics. This paper introduces a predictive supply chain performance management model which combines process modelling, performance measurement, data mining models, and web portal technologies into a unique model. It presents the supply chain modelling approach based on the specialized metamodel which allows modelling of any supply chain configuration and at different level of details. The paper also presents the supply chain semantic business intelligence (BI) model which encapsulates data sources and business rules and includes the data warehouse model with specific supply chain dimensions, measures, and KPIs (key performance indicators). Next, the paper describes two generic approaches for designing the KPI predictive data mining models based on the BI semantic model. KPI predictive models were trained and tested with a real-world data set. Finally, a specialized analytical web portal which offers collaborative performance monitoring and decision making is presented. The results show that these models give very accurate KPI projections and provide valuable insights into newly emerging trends, opportunities, and problems. This should lead to more intelligent, predictive, and responsive supply chains capable of adapting to future business environment. PMID:25386605
Natural disasters can wreck havoc on business operations. When civil unrest swept the UK in August 2011, the effect on business was stark, losing the retail sector £300m in unexpected costs and lost revenues. On the other side of the world, the natural disaster that hit Japan in early 2011 is estimated to have run up costs in the region of £189bn in repairs. Beyond this, the earthquake and its aftermath shattered supply chains, with technology companies expecting delays of up to six months before business could resume fully. It is impossible to predict incidents like these, but businesses can help mitigate disruption in the supply chain by undertaking business continuity management (BCM). A flexible supply chain is essential when it comes to BCM - whether it means being able to cope with altering transport routes at short notice, or finding or replacing a supplier at the last minute. Understanding the supply chain is critical when responding to major impacts that affect supply chains in multiple points - like IT system failures and country-wide fuel strikes. Businesses should carry out detailed business impact assessments and risk assessments right across the end-to-end supply chain and not just at key single points of failure. It is an intensive process that needs dedicated resources and ownership at the highest level. Recognising this, DHL has designed a 10-step process, which it has implemented across its global supply chain business. This paper provides an overview of what a supply chain really looks like, what can cause disruptions and how far up/down the supply chain companies need to go with their BCM planning.
Supply chain management was explored as a tool to prevent hazardous waste and reduce operating costs. Previous research had shown that pollution prevention measures were often costly and no expectation of cost savings could be realized. The reengineering of the Air Force hazardous material supply chain brought about by the Hazardous Material Pharmacy Program was tested to evaluate if hazardous waste had been precluded in this effort and if costs had also been avoided. To date, no research had explored the use of supply chain
Elia, Josephine A; Floudas, Christodoulos A
The economic, environmental, and social performances of energy systems depend on their geographical locations and the surrounding market infrastructure for feedstocks and energy products. Strategic decisions to locate energy conversion facilities must take all upstream and downstream operations into account, prompting the development of supply chain modeling and optimization methods. This article reviews the contributions of energy supply chain studies that include heat, power, and liquid fuels production. Studies are categorized based on specific features of the mathematical model, highlighting those that address energy supply chain models with and without considerations of multiperiod decisions. Studies that incorporate uncertainties are discussed, and opportunities for future research developments are outlined.
Supply chain management is the management of all processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through shipment). Performance measures, or metrics, are used to monitor the progress of supply chain initiatives. However, a consensus in DoD considers the metrics available to senior DoD managers to be inadequate or lacking the depth to measure the effectiveness of the DoD supply chain . The metrics are not balanced across customer service, cost, readiness, and
The amount of time nurses spend providing direct patient care seems to be continually eroding. So it's little wonder a survey conducted last year of critical care, OR nurses and nurse executives found that half of the 1600 respondents feel they spend too much time on supply chain duties. Most also said their supply chain duties impact patient safe ty and their ability to provide bedside care. Experts interviewed for this report believe it's time for supply chain leaders and nurses to develop a closer working partnership. Included are their recommendations to improve performance.
Zhang, Lili; Yan, Guangle
Supply Chain Financing (SCF) refers to a series of innovative and complicated financial services based on supply chain. The SCF set-up is a complex system, where the supply chain management and Small and Medium Enterprises (SMEs) financing services interpenetrate systematically. This paper establishes the organization structure of SCF System, and presents two financing models respectively, with or without the participation of the third-party logistic provider (3PL). Using Information Economics and Game Theory, the interrelationship among diverse economic sectors is analyzed, and the economic mechanism of development and existent for SCF system is demonstrated. New thoughts and approaches to solve SMEs financing problem are given.
Parkinson, Rosalind C
In September 2014, the FDA will establish a unique device identification (UDI) system to aid hospitals in better tracking and managing medical devices and analyzing their effectiveness. When these identifiers become part of patient medical records, the UDI system will provide a much-needed link between supply cost and patient outcomes. Hospitals should invest in technology and processes that can enable them to trace supply usage patterns directly to patients and analyze how these usage patterns affect cost and quality.
This EPA presentation focuses on the challenges in achieving sustainable freight transport in the supply chain, spotlighting Mondelez International and C.H. Robinson, their sustainability efforts, and how SmartWay helps.
Natural hazards distress the global economy by disrupting the interconnected supply chain networks. Manufacturing companies have created cost-efficient supply chains by reducing inventories, streamlining logistics and limiting the number of suppliers. As a result, today's supply chains are profoundly susceptible to systemic risks. In Thailand, for example, the GDP growth rate declined by 76 % in 2011 due to prolonged flooding. Thailand incurred economic damage including the loss of USD 46.5 billion, approximately 70% of which was caused by major supply chain disruptions in the manufacturing sector. Similar problems occurred after the Great East Japan Earthquake and Tsunami in 2011, the Mississippi River floods and droughts during 2011 - 2013, and Hurricane Sandy in 2012. This study proposes a methodology for modeling supply chain disruptions using a Bayesian network analysis (BNA) to estimate expected values of countermeasures of floods, such as inventory management, supplier management and hard infrastructure management. We first performed a spatio-temporal correlation analysis between floods and extreme precipitation data for the last 100 years at a global scale. Then we used a BNA to create synthetic networks that include variables associated with the magnitude and duration of floods, major components of supply chains and market demands. We also included decision variables of countermeasures that would mitigate potential losses caused by supply chain disruptions. Finally, we conducted a cost-benefit analysis by estimating the expected values of these potential countermeasures while conducting a sensitivity analysis. The methodology was applied to supply chain disruptions caused by the 2011 Thailand floods. Our study demonstrates desirable typical data requirements for the analysis, such as anonymized supplier network data (i.e. critical dependencies, vulnerability information of suppliers) and sourcing data(i.e. locations of suppliers, and production rates and
Kim, Gitae; Wu, Chih-Hang
In this research, we apply a scenario aggregation approach to solving the supply chain contract model formulated by two-stage stochastic programming problem. The supply chain contract can achieve the coordination between the buyer and the supplier. We formulate the stochastic programming model for a quantity-flexibility contract. The scenario aggregation method called the progressive hedging method is used to solve this problem. Experimental results show the convergence behaviour of the algorithm and the sensitivity of parameters.
Hasle, Peter; Jensen, Per Langaa
The development of globalised supply chains is a major challenge for sustainability. For several years, there has been discussion within the profession whether and how ergonomics and human factors can play a role. Based on our research, we have identified five major challenges from global supply chains especially related to the social aspects of sustainability: (1) criteria for social sustainability, (2) the role of key performance indicators in the management of supply chains, (3) the constant changes in supply chains, (4) the challenge in establishing participation, and (5) the development of agency and regulatory mechanisms. There are obviously no clear and simple solutions to these challenges. One possible avenue for progress might lie in acquiring a greater understanding of the challenges from global supply chains and developing a strategy which combines social and long-term business sustainability. Starting from such a basis, the next step would be to find ways for the ergonomics and human factors community to create international collaboration which can impact specific global supply chains.
Sherafati, Mahtab; Bashiri, Mahdi
One of the most strategic and the most significant decisions in supply chain management is reconfiguration of the structure and design of the supply chain network. In this paper, a closed loop supply chain network design model is presented to select the best tactical and strategic decision levels simultaneously considering the appropriate transportation mode in activated links. The strategic decisions are made for a long term; thus, it is more satisfactory and more appropriate when the decision variables are considered uncertain and fuzzy, because it is more flexible and near to the real world. This paper is the first research which considers fuzzy decision variables in the supply chain network design model. Moreover, in this study a new fuzzy optimization approach is proposed to solve a supply chain network design problem with fuzzy tactical decision variables. Finally, the proposed approach and model are verified using several numerical examples. The comparison of the results with other existing approaches confirms efficiency of the proposed approach. Moreover the results confirms that by considering the vagueness of tactical decisions some properties of the supply chain network will be improved.
Harvey, David; Hubbard, Carmen
Supply chains are already incorporating citizen/consumer demands for improved animal welfare, especially through product differentiation and the associated segmentation of markets. Nonetheless, the ability of the chain to deliver high(er) levels and standards of animal welfare is subject to two critical conditions: (a) the innovative and adaptive capacity of the chain to respond to society's demands; (b) the extent to which consumers actually purchase animal-friendly products. Despite a substantial literature reporting estimates of willingness to pay (WTP) for animal welfare, there is a belief that in practice people vote for substantially more and better animal welfare as citizens than they are willing to pay for as consumers. This citizen-consumer gap has significant consequences on the supply chain, although there is limited literature on the capacity and willingness of supply chains to deliver what the consumer wants and is willing to pay for. This paper outlines an economic analysis of supply chain delivery of improved standards for farm animal welfare in the EU and illustrates the possible consequences of improving animal welfare standards for the supply chain using a prototype belief network analysis.
Standard approach to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. End-to-end view. Total Lifecycle. Evaluate the readiness of the supply chain during the supply chain development phase.
465 - = Logistics Management Fully-Burdened Cost of Supply in Self-Sustaining Logistics Networks Eva Regnier, Jay Simon, Daniel Nussbaum, Aruna ...Challenges in Self-Sustaining Response Supply Chains Aruna Apte, John Khawam, Eva Regnier, Jay Simon, and Daniel Nussbaum Naval Postgraduate School
Buffington, Jack; Peterson, Ray
The purpose of this study is to conduct a supply chain material flow analysis (MFA) for the U.S. aluminum can market, consistent with studies conducted for the overall worldwide aluminum industry. A technical definition of the use of alloys 5182 and 3104 is conducted by metallurgists for use in the "aluminum can" MFA. Four propositions are created: technical, economic, and supply chain factors are as important to secondary aluminum recycling in an aluminum can as higher recycling rates (P1); the development of a unialloy aluminum can will increase reuse rates, but recycling rates must increase for this to happen (P2); a closed-loop aluminum can supply chain is not able to be fully realized in today's environment but is very useful for understanding improvement through both supply and demand (P3); and UBC supply can improve through a "voluntary deposit-refund system" approach (P4).
Knechtges, J P; Watts, C A
A supply chain is a series of customer and supplier relationships that extend throughout and beyond the company. It is an interwoven set of links that together form a chain supplying our customers in a seamless and integrated fashion delivering a high level of customer satisfaction. Supply chain management (SCM) integrates all activities so they are focused on customer satisfaction (both internally and externally). One of the things this article will attempt to accomplish is to provide a clear understanding of SCM's positive impact on customer service as well as on improving profitability, cash flow, product cycle times, and communication. Whether we go forward in the supply chain to the final end-user or backward in the supply chain to our supplier's suppliers, SCM will significantly improve our ability to serve our customers.
Das, Sujit; Warren, Joshua A.; West, Devin; Schexnayder, Susan M.
The objective of this study is to identify key opportunities in the carbon fiber (CF) supply chain where resources and investments can help advance the clean energy economy. The report focuses on four application areas—wind energy, aerospace, automotive, and pressure vessels—that top the list of industries using CF and carbon fiber reinforced polymers (CFRP) and are particularly relevant to the mission of U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE EERE). For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components.
Brechtelsbauer, Erich D; Pennell, Benjamin; Durham, Mary; Hertig, John B; Weber, Robert J
The integrity of the pharmaceutical supply chain is threatened by medication counterfeiting, importation of unapproved and substandard drugs, and grey markets - all of which have the potential to distribute drug products with the potential for serious harm. On November 27, 2013, President Obama signed into law Title II of the Drug Quality and Security Act, now known as the Drug Supply Chain Security Act (DSCSA). Over the next 10 years, the DSCSA will require the pharmaceutical supply chain to implement medication tracking and tracing; serialization, verification, and detection of suspicious products; and strict guidelines for wholesaler licensing and reporting. This article reviews the important aspects of the DSCSA and outlines the role of health-system pharmacy leaders in ensuring compliance to the DSCSA. By verifying that medication supplies are free from adulteration and tampering, the DSCSA serves as a foundational law to ensure quality in providing patient-centered pharmacy services.
The healthcare supply chain is a vast, disintegrated network of products and players, loosely held together by manual and people-intensive processes. Managing the flow of information, supplies, equipment, and services from manufacturers to distributors to providers of care is especially difficult in clinical supply chains, compared with more technology-intense industries like consumer goods or industrial manufacturing. As supplies move downstream towards hospitals and clinics, the quality and robustness of accompanying management and information systems used to manage these products deteriorates significantly. Technology that provides advanced planning, synchronization, and collaboration upstream at the large supply manufacturers and distributors rarely is used at even the world's larger and more sophisticated hospitals. This article outlines the current state of healthcare supply chain management technologies, addresses potential reasons for the lack of adoption of technologies and provides a roadmap for the evolution of technology for the future. This piece is based on both quantitative and qualitative research assessments of the healthcare supply chain conducted during the last two years.
CHAPMAN,LEON D.; PETERSEN,MARJORIE B.
The Demand Activated Manufacturing Architecture (DAMA) project during the last five years of work with the U.S. Integrated Textile Complex (retail, apparel, textile, and fiber sectors) has developed an inter-enterprise architecture and collaborative model for supply chains. This model will enable improved collaborative business across any supply chain. The DAMA Model for Supply Chain Collaboration is a high-level model for collaboration to achieve Demand Activated Manufacturing. The five major elements of the architecture to support collaboration are (1) activity or process, (2) information, (3) application, (4) data, and (5) infrastructure. These five elements are tied to the application of the DAMA architecture to three phases of collaboration - prepare, pilot, and scale. There are six collaborative activities that may be employed in this model: (1) Develop Business Planning Agreements, (2) Define Products, (3) Forecast and Plan Capacity Commitments, (4) Schedule Product and Product Delivery, (5) Expedite Production and Delivery Exceptions, and (6) Populate Supply Chain Utility. The Supply Chain Utility is a set of applications implemented to support collaborative product definition, forecast visibility, planning, scheduling, and execution. The DAMA architecture and model will be presented along with the process for implementing this DAMA model.
Taghizadeh, Houshang; Hafezi, Ehsan
In this paper, using supply chain operational reference, the reliability evaluation of available relationships in supply chain is investigated. For this purpose, in the first step, the chain under investigation is divided into several stages including first and second suppliers, initial and final customers, and the producing company. Based on the formed relationships between these stages, the supply chain system is then broken down into different subsystem parts. The formed relationships between the stages are based on the transportation of the orders between stages. Paying attention to the system elements' location, which can be in one of the five forms of series namely parallel, series/parallel, parallel/series, or their combinations, we determine the structure of relationships in the divided subsystems. According to reliability evaluation scales on the three levels of supply chain, the reliability of each chain is then calculated. Finally, using the formulas of calculating the reliability in combined systems, the reliability of each system and ultimately the whole system is investigated.
van Asselt, E D; Thissen, J T N M; van der Fels-Klerx, H J
Salmonella serotype distribution can give insight in contamination routes and persistence along a production chain. Therefore, it is important to determine not only Salmonella prevalence but also to specify the serotypes involved at the different stages of the supply chain. For this purpose, data from a national monitoring program in the Netherlands were used to estimate the serotype distribution and to determine whether this distribution differs for the available sampling points in the broiler supply chain. Data covered the period from 2002 to 2005, all slaughterhouses (n = 22), and the following 6 sampling points: departure from hatchery, arrival at the farm, departure from the farm, arrival at the slaughterhouse, departure from the slaughterhouse, and end of processing. Furthermore, retail data for 2005 were used for comparison with slaughterhouse data. The following serotypes were followed throughout the chain: Salmonella Enteritidis, Salmonella Typhimurium, Salmonella Paratyphi B var. Java (Salmonella Java), Salmonella Infantis, Salmonella Virchow, and Salmonella Mbandaka. Results showed that serotype distribution varied significantly throughout the supply chain (P < 0.05). Main differences were found at the farm and at the slaughterhouse (within one stage), and least differences were found between departure from one stage and arrival at the next stage. The most prominent result was the increase of Salmonella Java at farm level. This serotype remained the most prominent pathogen throughout the broiler supply chain up to the retail phase.
Ehlen, Mark A.; Sun, Amy C.; Pepple, Mark A.; Eidson, Eric D.; Jones, Brian S.
The potential impacts of man-made and natural disasters on chemical plants, complexes, and supply chains are of great importance to homeland security. To be able to estimate these impacts, we developed an agent-based chemical supply chain model that includes: chemical plants with enterprise operations such as purchasing, production scheduling, and inventories; merchant chemical markets, and multi-modal chemical shipments. Large-scale simulations of chemical-plant activities and supply chain interactions, running on desktop computers, are used to estimate the scope and duration of disruptive-event impacts, and overall system resilience, based on the extent to which individual chemical plants can adjust their internal operations (e.g., production mixes and levels) versus their external interactions (market sales and purchases, and transportation routes and modes). As a result, to illustrate how the model estimates the impacts of a hurricane disruption, a simple example model centered on 1,4-butanediol is presented.
Pedram, Ali; Yusoff, Nukman Bin; Udoncy, Olugu Ezutah; Mahat, Abu Bakar; Pedram, Payam; Babalola, Ayo
This paper attempts to integrate both a forward and reverse supply chain to design a closed-loop supply chain network (CLSC). The problem in the design of a CLSC network is uncertainty in demand, return products and the quality of return products. Scenario analyses are generated to overcome this uncertainty. In contrast to the existing supply chain network design models, a new application of a CLSC network was studied in this paper to reduce waste. A multi-product, multi-tier mixed integer linear model is developed for a CLSC network design. The main objective is to maximize profit and provide waste management decision support in order to minimize pollution. The result shows applicability of the model in the tire industry. The model determines the number and the locations of facilities and the material flows between these facilities.
Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana
During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.
Under a series of SBIR contracts with Marshall Space Flight Center, start-up company Made In Space, located on the center's campus, developed a high-precision 3D printer capable of manufacturing items in microgravity. The company will soon have a printer installed on the International Space Station, altering the space supply chain. It will print supplies and tools for NASA, as well as nanosatellite shells and other items for public and private entities.
Disruption in the global supply of rare earths poses a significant concern for America‘s energy security and clean energy objectives, its future defense...World Trade Organization rules by limiting clean energy imports, while incentivizing clean energy exports.54 If accurate, this speculation supports...resource scarcity and secure our supply chains. The NSS further declares the U.S. ―has a window of opportunity to lead in the development of clean energy technology
with a cDIIection of Information If It does not disDOav a currenUv valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1...CONTRACT NUMBER Supply Chain: Wake Up; It is Critic a l t o Military Success 6. AUTHOR Colonel Christopher E. Dexter , USA 7. PERFORMING...The DOD needs t o maintai n the viability of its global supply chain in Order to provide the best support possible, operate within fiscal constraints
Meijboom, Bert R; Bakx, Saskia J W G C; Westert, Gert P
In health care, multidisciplinary collaboration is both indispensable and complicated. We discuss organizational problems that occur in situations where multiple health care providers are required to cooperate for patients with complex needs. Four problem categories, labelled as communication, patient safety, waiting times and integration are distinguished. Then we develop a supply chain perspective on these problems in the sense of discussing remedies according to supply chain management (SCM) literature. This perspective implies a business focus on inter-organizational conditions and requirements necessary for delivering health care and cure across organizational borders. We conclude by presenting some strategic and policy recommendations.
Webb, G. Scott; Thomas, Stephanie P.; Liao-Troth, Sara
The SCOR (Supply Chain Operations Reference) Model Supply Chain Classroom Simulation is an in-class experiential learning activity that helps students develop a holistic understanding of the processes and challenges of supply chain management. The simulation has broader learning objectives than other supply chain related activities such as the…
Franklin, Charlotte; Todt, Kiersten
Information in this paper is the result of recommendations and remedies developed at 'Local Supply Chain Capacity in a Crisis Summit Exercise' held in Arlington, VA on 30th-31st January,2013. At the event, which was funded through the Regional Catastrophic Preparedness Grant Program, national private sector and not-for-profit essential resource provider experts in sectors such as transportation, communication systems, energy/power, financial resources, medical supplies and other vital supplies, together with emergency managers, discussed best practices, major challenges and exchanged remedy recommendations.
... International Trade Administration Advisory Committee on Supply Chain Competitiveness Solicitation of..., Including Ports, To Apply for Membership on the Advisory Committee on Supply Chain Competitiveness. SUMMARY... or entities, including ports, to serve as members of the Advisory Committee on Supply...
... Parts Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to... Employment and Training Administration Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles... Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston,...
Ramaswamy, K. V.
The purpose of this proposal is to develop and implement a concentration in Supply Chain Management in the existing traditional MBA program effective fall 2012. Houston is the hub for many multinational oil and energy companies, large healthcare systems, wholesale/retail businesses, engineering and construction companies, and is a major city along…
MSC) involves Maintenance, Repair, and Overhaul ( MRO ) organizations and the relationships within and across suppliers and customers. These...Abstract Maintenance Supply Chain (MSC) involves Maintenance, Repair, and Overhaul ( MRO ) organizations and the relationships within and across suppliers...maintenance, repair and overhaul ( MRO ) organizations to show how uncertainty is affected by the use of information systems in maintenance operations. In spite
The present work proposes a computer-aided methodology for designing sustainable supply chains in terms of sustainability metrics by resorting to the P-graph framework. The methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the ...
Signed // ____________ 12 March 2010 Timothy J. Pettit , Lt Col, PhD (Chairman) Date ______________// Signed //______________ 12...advisor, Lt Col Tim Pettit , and my committee member, Maj Dan Mattioda, for their guidance and support during this research effort. I would, also, like...Resilience Assessment and Management (SCRAM™) tool ( Pettit , 2008). The SCRAM™ tool is used to measure current supply chain vulnerabilities and capabilities
Kalafsky, Ronald V.; Conner, Neil
Supply chains and other trade networks are of interest to geographers, due to their ability to connect economic processes at various scales. Relatively recent research, however, suggests that core concepts and topics in economic geography are not being fully and effectively engaged in the classroom environment. With such findings as a motivation,…
Zdravković, Milan; Panetto, Hervé; Trajanović, Miroslav; Aubry, Alexis
Reference models play an important role in the knowledge management of the various complex collaboration domains (such as supply chain networks). However, they often show a lack of semantic precision and, they are sometimes incomplete. In this article, we present an approach to overcome semantic inconsistencies and incompleteness of the Supply Chain Operations Reference (SCOR) model and hence improve its usefulness and expand the application domain. First, we describe a literal web ontology language (OWL) specification of SCOR concepts (and related tools) built with the intention to preserve the original approach in the classification of process reference model entities, and hence enable the effectiveness of usage in original contexts. Next, we demonstrate the system for its exploitation, in specific - tools for SCOR framework browsing and rapid supply chain process configuration. Then, we describe the SCOR-Full ontology, its relations with relevant domain ontology and show how it can be exploited for improvement of SCOR ontological framework competence. Finally, we elaborate the potential impact of the presented approach, to interoperability of systems in supply chain networks.
Jay Simon, Daniel Nussbaum, Aruna Apte, and John Khawam Naval Postgraduate School Platform Design for Fleet-Level Efficiency: Application for Air...Gue Auburn University Issues and Challenges in Self-Sustaining Response Supply Chains Aruna Apte, John Khawam, Eva Regnier, Jay Simon, and Daniel
Chen, Jin-Xiao; Chen, Jian
Reduction of greenhouse gas emissions has become an enormous challenge for any single enterprise and its supply chain because of the increasing concern on global warming. This paper investigates carbon footprinting and responsibility allocation for supply chains involved in joint production. Our study is conducted from the perspective of a social planner who aims to achieve social value optimization. The carbon footprinting model is based on operational activities rather than on firms because joint production blurs the organizational boundaries of footprints. A general model is proposed for responsibility allocation among firms who seek to maximize individual profits. This study looks into ways for the decentralized supply chain to achieve centralized optimality of social value under two emission regulations. Given a balanced allocation for the entire supply chain, we examine the necessity of over-allocation to certain firms under specific situations and find opportunities for the firms to avoid over-allocation. The comparison of the two regulations reveals that setting an emission standard per unit of product will motivate firms to follow the standard and improve their emission efficiencies. Hence, a more efficient and promising policy is needed in contrast to existing regulations on total production.
Caniels, Marjolein C. J.; Romijn, Henny A.
Purpose: The purpose of this paper is to contribute to the study of supply chain design from the perspective of complex dynamic systems. Unlike extant studies that use formal simulation modelling and associated methodologies rooted in the physical sciences, it adopts a framework rooted in the social sciences, strategic niche management, which…
Dobbin, James; Jenkins, Mike
Today's purchasing professionals recognize the need to reduce non-value-added procedures (clerical functions) while emphasizing strategic planning. Results-oriented supply-chain managers need superb communication, negotiation, and leadership skills to achieve long-term value and resist the lowest, first- cost bids. (Contains 13 references.) (MLH)
Thakkar, Jitesh; Kanda, Arun; Deshmukh, S. G.
Purpose: The aim of this paper is to propose a mapping framework for evaluating supply chain learning potential for the context of small- to medium-sized enterprises (SMEs). Design/methodology/approach: The extracts of recently completed case based research for ten manufacturing SME units and facts reported in the previous research are utilized…
Benton, Helen; Binder, Mario; Egel-Hess, Wolfgang
Despite the widespread discussion of organisational learning, there is little scholarly contribution on promoting learning through the practical application of management tools. This is especially true in a complex internal supply chain context of an organisation. This paper seeks to address this gap by exploring and analysing the capability of…
Gonzalez, Ronalds W.
Cellulosic biomass is a potential and competitive source for bioenergy production, reasons for such acclamation include: biomass is one the few energy sources that can actually be utilized to produce several types of energy (motor fuel, electricity, heat) and cellulosic biomass is renewable and relatively found everywhere. Despite these positive advantages, issues regarding cellulosic biomass availability, supply chain, conversion process and economics need a more comprehensive understanding in order to identify the near short term routes in biomass to bioenergy production. Cellulosic biomass accounts for around 35% to 45% of cost share in cellulosic ethanol production, in addition, different feedstock have very different production rate, (dry ton/acre/year), availability across the year, and chemical composition that affect process yield and conversion costs as well. In the other hand, existing and brand new conversion technologies for cellulosic ethanol production offer different advantages, risks and financial returns. Ethanol yield, financial returns, delivered cost and supply chain logistic for combinations of feedstock and conversion technology are investigated in six studies. In the first study, biomass productivity, supply chain and delivered cost of fast growing Eucalyptus is simulated in economic and supply chain models to supply a hypothetic ethanol biorefinery. Finding suggests that Eucalyptus can be a potential hardwood grown specifically for energy. Delivered cost is highly sensitive to biomass productivity, percentage of covered area. Evaluated at different financial expectations, delivered cost can be competitive compared to current forest feedstock supply. In the second study, Eucalyptus biomass conversion into cellulosic ethanol is simulated in the dilute acid pretreatment, analysis of conversion costs, cost share, CAPEX and ethanol yield are examined. In the third study, biomass supply and delivered cost of loblolly pine is simulated in economic
Das, Sujit; Warren, Josh; West, Devin; Schexnayder, Susan M.
This study identifies key opportunities in the carbon fiber supply chain where the United States Department of Energy's Office of Energy Efficiency and Renewable Energy resources and investments can help the United States achieve or maintain a competitive advantage. The report focuses on four application areas--wind energy, aerospace, automotive, and pressure vessels--that top the list of industries using carbon fiber and carbon fiber reinforced polymers and are also particularly relevant to EERE's mission. For each of the four application areas, the report addresses the supply and demand trends within that sector, supply chain, and costs of carbon fiber and components, all contributing to a competitiveness assessment that addresses the United States' role in future industry growth. This report was prepared by researchers at Oak Ridge National Laboratory and the University of Tennessee for the Clean Energy Manufacturing Analysis Center.
Murayama, Takeshi; Yoda, Mitsunobu; Eguchi, Toru; Oba, Fuminori
This paper describes a production planning method for a reverse supply chain, in which a disassembly company takes reusable components from returned used products and supplies the reusable components for a product manufacturer. This method addresses the issue that the timings and quantities of returned products and reusable components obtained from them are unknown. This method first predicts the quantities of returned products and reusable components at each time period by using reliability models. Using the prediction result, the method performs production planning based on Material Requirements Planning (MRP). This method enables us to plan at each time period: the quantity of the products to be disassembled; the quantity of the reusable components to be used; and the quantity of the new components to be produced. The flow of the components and products through a forward and reverse supply chain is simulated to show the effectiveness of the method.
This paper will look at some of the experiences, lessons and frustrations experienced in managing supply chains for business continuity. No-one has time to make all the mistakes, nor to learn all the lessons on their own, so it is useful to share experiences. Over the last 25 years, the author has been involved in supply chain management as a contract manager; a programme and project manager; and as a business continuity manager. Although times change, there are some fundamental principles that are absolutely critical in making sure that supply chains do what they are needed to do/ to keep business going. Supply chains are here to stay. Indeed, with today's drive towards outsourcing, best-shoring and contracting out, they are becoming more important every year and this will only continue over time. Moreover, in the highly competitive markets in which all organisations operate, suppliers may well be carrying out operations that not all that long ago would have been considered to be part of core business. Getting the right relationship with the supply chain is more critical than ever before.1 What does this mean to business continuity professionals? They need to think not just about their own BC plans, but about the plans of their suppliers, and even those of their suppliers' suppliers. This may seem obvious, but unlike internal BC plans written by and for an organisation, it must be considered just what a supplier's plans are designed to achieve. What business outcomes will their plans deliver? If they recover their own business, how does that affect the business they serve? Are others' assumptions of how they will react in line with theirs?
Vendor-managed inventory (VMI) software can help both stand-alone and IDS-based hospitals significantly reduce supply-chain management costs. The software tracks an organization's actual supply demand and generates automatic purchase orders, providing the supplies on an as-needed basis. As a result, a hospital's inventory-carrying and purchase-order processing costs may be reduced significantly. To make optimum use of the VMI software, IDSs and hospitals first need to ensure that their methods of collecting data on supply consumption are efficient and accurate. They then need to either establish a relationship with a distributor offering VMI capability or, if the organization is a large IDS with its own distribution center, acquire the software for internal use. A collaboration with a distributor requires establishing effective electronic communications for data sharing.
does not fit all Scrum : The most adopted Agile method Scaling Agile Methods: Going beyond the team level methods Challenges to Agile Adoption: What’s...Arsenal Lapham, Wrubel Jan 2015 © 2015 Carnegie Mellon University. Myth: You Must Choose Agile or Waterfall – you can’t do both What about “water- scrum ...used in multiple environments, including DoD programs.1 1Start with “Agile EVM in Scrum Projects” from AGILE 2006 to get started learning about Agile
Aruoma, Okezie I
Food regulation in the main is aimed at protecting the consumer's health, increasing economic viability, harmonizing well-being and engendering fair trade on foods within and between nations. Consumers nowadays are faced with food or food ingredients that may derive from distant countries or continents, and with a less transparent food supply. Safety concerns must cover the range of different food chains relevant to a certain food product or product group, including all relevant producers, manufacturing sites and food service establishments within a country as well as those importing into the country. Hazard analysis at critical control points (HACCP), good manufacturing practice (GMP) and good hygiene practice (GHP) are major components of the safety management systems in the food supply chain. Principally, "a hazard" is a biological, chemical or physical agent in, or condition of, food that has the potential to cause an adverse health effect. The likelihood of occurrence and severity of the same is important for the assessment of the risk presented by the hazard to the food supply chain. The Government's regulatory mechanisms in accordance with the WTO agreements (HACCPs, sanitary and phytosanitary measures, etc.) oversee the analyses of public health problems and their association to the food supply. Under the WTO SPS Agreements and the codes of practices issued by the Codex Alimentarius Commission, there now exists a benchmark for international harmonization that guarantee the trade of safe food. Inevitably, food safety is still mainly the responsibility of the consumer.
Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc
The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.
Lloyd, John; McCarney, Steve; Ouhichi, Ramzi; Lydon, Patrick; Zaffran, Michel
This paper describes an approach piloted in the Kasserine region of Tunisia to increase the energy efficiency of the distribution of vaccines and temperature sensitive drugs. The objectives of an approach, known as the ‘net zero energy’ (NZE) supply chain were demonstrated within the first year of operation. The existing distribution system was modified to store vaccines and medicines in the same buildings and to transport them according to pre-scheduled and optimized delivery circuits. Electric utility vehicles, dedicated to the integrated delivery of vaccines and medicines, improved the regularity and reliability of the supply chains. Solar energy, linked to the electricity grid at regional and district stores, supplied over 100% of consumption meeting all energy needs for storage, cooling and transportation. Significant benefits to the quality and costs of distribution were demonstrated. Supply trips were scheduled, integrated and reliable, energy consumption was reduced, the recurrent cost of electricity was eliminated and the release of carbon to the atmosphere was reduced. Although the initial capital cost of scaling up implementation of NZE remain high today, commercial forecasts predict cost reduction for solar energy and electric vehicles that may permit a step-wise implementation over the next 7–10 years. Efficiency in the use of energy and in the deployment of transport is already a critical component of distribution logistics in both private and public sectors of industrialized countries. The NZE approach has an intensified rationale in countries where energy costs threaten the maintenance of public health services in areas of low population density. In these countries where the mobility of health personnel and timely arrival of supplies is at risk, NZE has the potential to reduce energy costs and release recurrent budget to other needs of service delivery while also improving the supply chain. PMID:25444811
Lloyd, John; McCarney, Steve; Ouhichi, Ramzi; Lydon, Patrick; Zaffran, Michel
This paper describes an approach piloted in the Kasserine region of Tunisia to increase the energy efficiency of the distribution of vaccines and temperature sensitive drugs. The objectives of an approach, known as the 'net zero energy' (NZE) supply chain were demonstrated within the first year of operation. The existing distribution system was modified to store vaccines and medicines in the same buildings and to transport them according to pre-scheduled and optimized delivery circuits. Electric utility vehicles, dedicated to the integrated delivery of vaccines and medicines, improved the regularity and reliability of the supply chains. Solar energy, linked to the electricity grid at regional and district stores, supplied over 100% of consumption meeting all energy needs for storage, cooling and transportation. Significant benefits to the quality and costs of distribution were demonstrated. Supply trips were scheduled, integrated and reliable, energy consumption was reduced, the recurrent cost of electricity was eliminated and the release of carbon to the atmosphere was reduced. Although the initial capital cost of scaling up implementation of NZE remain high today, commercial forecasts predict cost reduction for solar energy and electric vehicles that may permit a step-wise implementation over the next 7-10 years. Efficiency in the use of energy and in the deployment of transport is already a critical component of distribution logistics in both private and public sectors of industrialized countries. The NZE approach has an intensified rationale in countries where energy costs threaten the maintenance of public health services in areas of low population density. In these countries where the mobility of health personnel and timely arrival of supplies is at risk, NZE has the potential to reduce energy costs and release recurrent budget to other needs of service delivery while also improving the supply chain.
Bekkering, J; Broekhuis, A A; van Gemert, W J T
In this review the knowledge status of and future research options on a green gas supply based on biogas production by co-digestion is explored. Applications and developments of the (bio)gas supply in The Netherlands have been considered, whereafter literature research has been done into the several stages from production of dairy cattle manure and biomass to green gas injection into the gas grid. An overview of a green gas supply chain has not been made before. In this study it is concluded that on installation level (micro-level) much practical knowledge is available and on macro-level knowledge about availability of biomass. But on meso-level (operations level of a green gas supply) very little research has been done until now. Future research should include the modeling of a green gas supply chain on an operations level, i.e. questions must be answered as where to build digesters based on availability of biomass. Such a model should also advise on technology of upgrading depending on scale factors. Future research might also give insight in the usability of mixing (partly upgraded) biogas with natural gas. The preconditions for mixing would depend on composition of the gas, the ratio of gases to be mixed and the requirements on the mixture.
The objective of this paper is proposing a developed balanced scorecard approach to measure supply chain performance with the aim of creating more value in manufacturing and business operations. The most important metrics have been selected based on experts' opinion acquired by in-depth interviews focused on creating more value for stakeholders. Using factor analysis method, a survey research has been used to categorize selected metrics into balanced scorecard perspectives. The result identifies the intensity of correlation between perspectives and cause-and-effect chains among them using statistical method based on a real case study in home appliance manufacturing industries.
Roni, Mohammad S.; Cafferty, Kara G.; Hess, J. Richard; Jacobson, Jacob J.; Kenney, Kevin L.; Searcy, Erin; Tumuluru, Jaya S.
This chapter provides an overview of lignocellulosic crop supply chains such as Miscanthus, switch grass, reed canary grass, rye, and giant reed by outlining typical logistic operations in support of a liquid biofuel market. We present two strategies for managing feedstocks within the biomass supply system: (1) the conventional bale feedstock supply system and (2) the advanced supply system concept. Finally, we discuss feedstock blending and integrated landscape management as innovative improvements to the lignocellulosic crop supply chain.
Zhang, Rui; Li, Jingfei; Wu, Shaoyu; Meng, Dabin
The research on service supply chain has attracted more and more focus from both academia and industrial community. In a service supply chain, the selection of supplier portfolio is an important and difficult problem due to the fact that a supplier portfolio may include multiple suppliers from a variety of fields. To address this problem, we propose a novel supplier portfolio selection method based on a well known machine learning approach, i.e., Ranking Neural Network (RankNet). In the proposed method, we regard the problem of supplier portfolio selection as a ranking problem, which integrates a large scale of decision making features into a ranking neural network. Extensive simulation experiments are conducted, which demonstrate the feasibility and effectiveness of the proposed method. The proposed supplier portfolio selection model can be applied in a real corporation easily in the future. PMID:27195756
Lin, Tao; Rodríguez, Luis F; Shastri, Yogendra N; Hansen, Alan C; Ting, K C
To ensure effective biomass feedstock provision for large-scale biofuel production, an integrated biomass supply chain optimization model was developed to minimize annual biomass-ethanol production costs by optimizing both strategic and tactical planning decisions simultaneously. The mixed integer linear programming model optimizes the activities range from biomass harvesting, packing, in-field transportation, stacking, transportation, preprocessing, and storage, to ethanol production and distribution. The numbers, locations, and capacities of facilities as well as biomass and ethanol distribution patterns are key strategic decisions; while biomass production, delivery, and operating schedules and inventory monitoring are key tactical decisions. The model was implemented to study Miscanthus-ethanol supply chain in Illinois. The base case results showed unit Miscanthus-ethanol production costs were $0.72L(-1) of ethanol. Biorefinery related costs accounts for 62% of the total costs, followed by biomass procurement costs. Sensitivity analysis showed that a 50% reduction in biomass yield would increase unit production costs by 11%.
Gonzálvez-Gallego, Nicolás; Molina-Castillo, Francisco-Jose; Soto-Acosta, Pedro; Varajao, Joao; Trigo, Antonio
The aim of this paper is to empirically test not only the direct effects of information and communication technology (ICT) capabilities and integrated information systems (IS) on firm performance, but also the moderating role of IS integration along the supply chain in the relationship between ICT external and capabilities and business performance. Data collected from 102 large Iberian firms from Spain and Portugal are used to test the research model. The hierarchical multiple regression analysis is employed to test the direct effects and the moderating relationships proposed. Results show that external and internal ICT capabilities are important drivers of firm performance, while merely having integrated IS do not lead to better firm performance. In addition, a moderating effect of IS integration in the relationship between ICT capabilities and business performance is found, although this integration only contributes to firm performance when it is directed to connect with suppliers or customers rather than when integrating the whole supply chain.
Eggert, Roderick; Wadia, Cyrus; Anderson, Corby; Bauer, Diana; Fields, Fletcher; Meinert, Lawrence D.; Taylor, Patrick
Rare earths, sometimes called the vitamins of modern materials, captured public attention when their prices increased more than ten-fold in 2010 and 2011. As prices fell between 2011 and 2016, rare earths receded from public view—but less visibly they became a major focus of innovative activity in companies, government laboratories and universities. Geoscientists worked to better understand the resource base and improve our knowledge about mineral deposits that will be mines in the future. Process engineers carried out research that is making primary production and recycling more efficient. Materials scientists and engineers searched for substitutes that will require fewer or no rare earths while providing properties comparable or superior to those of existing materials. As a result, even though global supply chains are not significantly different now than they were before the market disruption, the innovative activity motivated by the disruption likely will have far-reaching, if unpredictable, consequences for supply chains of rare earths in the future.
Che, Z. H.; Chiang, Tzu-An; Kuo, Y. C.
In consideration of capacity constraints, fuzzy defect ratio, and fuzzy transport loss ratio, this paper attempted to establish an optimized decision model for production planning and distribution of a multiphase, multiproduct reverse supply chain, which addresses defects returned to original manufacturers, and in addition, develops hybrid algorithms such as Particle Swarm Optimization-Genetic Algorithm (PSO-GA), Genetic Algorithm-Simulated Annealing (GA-SA), and Particle Swarm Optimization-Simulated Annealing (PSO-SA) for solving the optimized model. During a case study of a multi-phase, multi-product reverse supply chain network, this paper explained the suitability of the optimized decision model and the applicability of the algorithms. Finally, the hybrid algorithms showed excellent solving capability when compared with original GA and PSO methods. PMID:24892057
Che, Z H; Chiang, Tzu-An; Kuo, Y C; Cui, Zhihua
In consideration of capacity constraints, fuzzy defect ratio, and fuzzy transport loss ratio, this paper attempted to establish an optimized decision model for production planning and distribution of a multiphase, multiproduct reverse supply chain, which addresses defects returned to original manufacturers, and in addition, develops hybrid algorithms such as Particle Swarm Optimization-Genetic Algorithm (PSO-GA), Genetic Algorithm-Simulated Annealing (GA-SA), and Particle Swarm Optimization-Simulated Annealing (PSO-SA) for solving the optimized model. During a case study of a multi-phase, multi-product reverse supply chain network, this paper explained the suitability of the optimized decision model and the applicability of the algorithms. Finally, the hybrid algorithms showed excellent solving capability when compared with original GA and PSO methods.
Joossens, L; Raw, M
Background: The illicit tobacco trade results in huge losses of revenue to governments, estimated at $US40–50 billion in 2006, and in increased consumption and thus health problems because it makes tobacco available more cheaply. On 20 October 2008 the second meeting of the International Negotiating Body (INB2) on the illicit trade protocol of WHO’s Framework Convention on Tobacco Control (FCTC) will discuss measures to tackle the illicit trade in tobacco products. Methods: This paper presents the experience over the last decade of three countries, Italy, Spain and the United Kingdom, which shows that tobacco smuggling can be successfully tackled. Conclusion: The evidence strongly suggests that the key to controlling smuggling is controlling the supply chain, and that the supply chain is controlled to a great extent by the tobacco industry. PMID:18784154
Zhang, Rui; Li, Jingfei; Wu, Shaoyu; Meng, Dabin
The research on service supply chain has attracted more and more focus from both academia and industrial community. In a service supply chain, the selection of supplier portfolio is an important and difficult problem due to the fact that a supplier portfolio may include multiple suppliers from a variety of fields. To address this problem, we propose a novel supplier portfolio selection method based on a well known machine learning approach, i.e., Ranking Neural Network (RankNet). In the proposed method, we regard the problem of supplier portfolio selection as a ranking problem, which integrates a large scale of decision making features into a ranking neural network. Extensive simulation experiments are conducted, which demonstrate the feasibility and effectiveness of the proposed method. The proposed supplier portfolio selection model can be applied in a real corporation easily in the future.
small to facilitate cooperation. There are also antecedents to SCM that enhance or impede the implementation of an effective supply chain. According...to Mentzer et al. (2001) research, these antecedents are the willingness to address trust, commitment, interdependence, organizational compatibility...the two proactive levels than the reactive levels o How to recover needs to receive more attention - There is limited empirical research on how
Loke, Matthew K; Leung, PingSun
Food waste highlights a considerable loss of resources invested in the food supply chain. While it receives a lot of attention in the global context, the assessment of food waste is deficient at the sub-national level, owing primarily to an absence of quality data. This article serves to explore that gap and aims to quantify the edible weight, economic value, and calorie equivalent of food waste in Hawaii. The estimates are based on available food supply data for Hawaii and the US Department of Agriculture's (USDA's) loss-adjusted food availability data for defined food groups at three stages of the food supply chain. At its highest aggregated level, we estimate Hawaii's food waste generation at 237,122 t or 26% of available food supply in 2010. This is equivalent to food waste of 161.5 kg per person, per annum. Additionally, this food waste is valued at US$1.025 billion annually or the equivalent of 502.6 billion calories. It is further evident that the occurrence of food waste by all three measures is highest at the consumer stage, followed by the distribution and retail stage, and is lowest at the post-harvest and packing stage. The findings suggest that any meaningful intervention to reduce food waste in Hawaii should target the consumer, and distribution and retail stages of the food supply chain. Interventions at the consumer stage should focus on the two protein groups, as well as fresh fruits and fresh vegetables.
Interrante, L.D.; Macfarlane, J.F.
There is a current trend for manufacturing enterprises in a supply chain of a particular industry to join forces in an attempt to promote efficiencies and improve competitive position. Such alliances occur in the context of specific legal and business agreements such that each enterprise retains a majority of its business and manufacturing information as private and shares other information with its trading partners. Shared information may include enterprise demand projections, capacities, finished goods inventories, and aggregate production schedules. Evidence of the trend toward information sharing includes the recent emphases on vendor-managed inventories, quick response, and Electronic Data Interchange (EDI) standards. The increased competition brought on by the global marketplace is driving industries to consider the advantages of trading partner agreements. Aggregate-level forecasts, supply-chain production smoothing, and aggregate-level inventory policies can reduce holding costs, record-keeping overhead, and lead time in product development. The goal of this research is to orchestrate information exchange among trading partners to allow for aggregate-level analysis to enhance supply chain efficiency. The notion of Enterprise Interface Control (EIC) is introduced as a means of accomplishing this end.
Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can
Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers.
Ehlen, Mark A.; Sun, Amy C.; Pepple, Mark A.; ...
The potential impacts of man-made and natural disasters on chemical plants, complexes, and supply chains are of great importance to homeland security. To be able to estimate these impacts, we developed an agent-based chemical supply chain model that includes: chemical plants with enterprise operations such as purchasing, production scheduling, and inventories; merchant chemical markets, and multi-modal chemical shipments. Large-scale simulations of chemical-plant activities and supply chain interactions, running on desktop computers, are used to estimate the scope and duration of disruptive-event impacts, and overall system resilience, based on the extent to which individual chemical plants can adjust their internal operationsmore » (e.g., production mixes and levels) versus their external interactions (market sales and purchases, and transportation routes and modes). As a result, to illustrate how the model estimates the impacts of a hurricane disruption, a simple example model centered on 1,4-butanediol is presented.« less
Ma, Jinping; Wang, Kanliang; Xu, Lida
Cross-organisational workflow systems are a component of enterprise information systems which support collaborative business process among organisations in supply chain. Currently, the majority of workflow systems is developed in perspectives of information modelling without considering actual requirements of supply chain management. In this article, we focus on the modelling and analysis of the cross-organisational workflow systems in the context of lean supply chain (LSC) using Petri nets. First, the article describes the assumed conditions of cross-organisation workflow net according to the idea of LSC and then discusses the standardisation of collaborating business process between organisations in the context of LSC. Second, the concept of labelled time Petri nets (LTPNs) is defined through combining labelled Petri nets with time Petri nets, and the concept of labelled time workflow nets (LTWNs) is also defined based on LTPNs. Cross-organisational labelled time workflow nets (CLTWNs) is then defined based on LTWNs. Third, the article proposes the notion of OR-silent CLTWNS and a verifying approach to the soundness of LTWNs and CLTWNs. Finally, this article illustrates how to use the proposed method by a simple example. The purpose of this research is to establish a formal method of modelling and analysis of workflow systems for LSC. This study initiates a new perspective of research on cross-organisational workflow management and promotes operation management of LSC in real world settings.
Tang, Liang; Jing, Ke; He, Jie; Stanley, H. Eugene
A supply chain network is a typical interdependent network composed of an undirected cyber-layer network and a directed physical-layer network. To analyze the robustness of this complex interdependent supply chain network when it suffers from disruption events that can cause nodes to fail, we use a cascading failure process that focuses on load propagation. We consider load propagation via connectivity links as node failure spreads through one layer of an interdependent network, and we develop a priority redistribution strategy for failed loads subject to flow constraint. Using a giant component function and a one-to-one directed interdependence relation between nodes in a cyber-layer network and physical-layer network, we construct time-varied functional equations to quantify the dynamic process of failed loads propagation in an interdependent network. Finally, we conduct a numerical simulation for two cases, i.e., single node removal and multiple node removal at the initial disruption. The simulation results show that when we increase the number of removed nodes in an interdependent supply chain network its robustness undergoes a first-order discontinuous phase transition, and that even removing a small number of nodes will cause it to crash.
Türkay, Metin; Saraçoğlu, Öztürk; Arslan, Mehmet Can
Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor usage levels in the medium term. Traditionally standard mathematical programming formulation is used to devise the aggregate plan so as to minimize the total cost of operations. However, this formulation is purely an economic model that does not include sustainability considerations. In this study, we revise the standard aggregate planning formulation to account for additional environmental and social criteria to incorporate triple bottom line consideration of sustainability. We show how these additional criteria can be appended to traditional cost accounting in order to address sustainability in aggregate planning. We analyze the revised models and interpret the results on a case study from real life that would be insightful for decision makers. PMID:26807848
Hamilton, Bruce Duncan
The objective of the report is to provide an assessment of the domestic supply chain and manufacturing infrastructure supporting the U.S. offshore wind market. The report provides baseline information and develops a strategy for future development of the supply chain required to support projected offshore wind deployment levels. A brief description of each of the key chapters includes: » Chapter 1: Offshore Wind Plant Costs and Anticipated Technology Advancements. Determines the cost breakdown of offshore wind plants and identifies technical trends and anticipated advancements in offshore wind manufacturing and construction. » Chapter 2: Potential Supply Chain Requirements and Opportunities. Provides an organized, analytical approach to identifying and bounding the uncertainties associated with a future U.S. offshore wind market. It projects potential component-level supply chain needs under three demand scenarios and identifies key supply chain challenges and opportunities facing the future U.S. market as well as current suppliers of the nation’s land-based wind market. » Chapter 3: Strategy for Future Development. Evaluates the gap or competitive advantage of adding manufacturing capacity in the U.S. vs. overseas, and evaluates examples of policies that have been successful . » Chapter 4: Pathways for Market Entry. Identifies technical and business pathways for market entry by potential suppliers of large-scale offshore turbine components and technical services. The report is intended for use by the following industry stakeholder groups: (a) Industry participants who seek baseline cost and supplier information for key component segments and the overall U.S. offshore wind market (Chapters 1 and 2). The component-level requirements and opportunities presented in Section 2.3 will be particularly useful in identifying market sizes, competition, and risks for the various component segments. (b) Federal, state, and local policymakers and economic development
opportunity presented by DLA: Consumable Supplies SMALL BUSINESS RESOURCES • DLA website: http://www.dla.mil/db/ List of buying activities, commodities...Supplier Interfaces DLR – Depot Level Reparables (BRAC) DSCC Small Business Program/Sourcing Initiatives DoD EMALL Demonstration Overview Value...Maritime Supply Chains Business Conference & Exhibition. I am delighted you have taken the time from your schedules to be with us during the next couple
Organizations that have developed comprehensive greenhouse gas inventories and aggressive emissions reduction goals discuss their strategies for managing greenhouse gases in their organizational supply chains and use of EPA Supply Chain resources.
DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor
Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience.
The global Supply Chain Resilience Survey by the Business Continuity Institute and Zurich Insurance is a comprehensive study on the state of supply chains in different organisations worldwide. As a benchmarking tool, it also contains data about business continuity arrangements in place to ensure supply chain resilience. Given this study's historically qualitative approach to reporting, this paper aims to introduce quantitative analysis. In this paper, responses that report membership in Standard Industrial Classification 2007 industry sectors from the 2013 Supply Chain Resilience Survey were disaggregated and related to supply chain disruption reporting. A chi-square test of independence reveals that membership in a particular industry sector influences reporting of supply chain disruption. Nonetheless, the relationship between these variables is weak. This study demonstrates interesting differences between industry sectors in terms of supply chain resilience. Further research is required in terms of other variables in order to provide granularity and relevant findings to supply chain planners.
demand for materials in their raw forms. This briefing demonstrates the operation of DRAM using the neodymium -iron-boron (NdFeB) magnet supply chain as...operation on neodymium magnet supply chain Prototype test case developed from available data Model for analysis of downstream supply chains for...using the neodymium -iron-boron (NdFeB) magnet supply chain as a test case. That demonstration was facilitated by using data that IDA had acquired on
Sponsored by DTIC Supply Chain Viability for the North American Microwave Power Tube Industry Supply Chain Viability for the US Microwave Power Tube...Industry iii Supply Chain Viability for the North American Microwave Power Tube Industry September 2002 Therese M. Philippi Federico M. Sciammarella...Patterson Air Force Base 45433-7739 Supply Chain Viability for the US Microwave Power Tube Industry ii REPORT DOCUMENTATION PAGE Form Approved Public
organization, but supply chain management ( SCM ) has broadened this scope to incorporate all organizations along the supply chain. This shifted the notion of...competition from that of between individual organizations to between supply chains. Supply chain management is an ever growing field; multiple SCM ...industry to industry. Firms have limited resources and a desire to know if the development and implementation of SCM within their firm is, in fact
Hu, Yaodong; Wu, Shuyan; Ma, Haiyan
On-line customer research has been conducted for European and American markets by marketers and academics. Whilst e-Commerce and tourism develop rapidly in China, and the fraud information in E-commerce market makes the conditions of information asymmetry becoming more seriously, understanding of Chinese internet travelers is required. This paper reviews current research on supply chain management (SCM) within the context of tourism. SCM in the manufacturing industry has attracted widespread research interest over the past two decades, whereas studies of SCM in the tourism e-commerce are very limited. The potential benefit of considering not only individual enterprises but also the tourism value chain becomes evident. This paper presents the model e-market structure and process analysis of tourism e-commerce, and also sets up tourism supply chain and tourism e-commerce system to probe how to apply tourism ecommerce to promote the sustainable development of tourism. The paper also identifies key research questions in TSCM worthy of future theoretical and empirical exploration.
... Supply Chain Competitiveness and solicitation of nominations for membership. SUMMARY: The Under Secretary... establishment of the Advisory Committee on Supply Chain Competitiveness (the Committee) by the Secretary of... improve U.S. supply chain competitiveness in the domestic and global economy. DATES: Nominations...
Huynh, Minh Q.; Chu, Hung W.
The field of supply chain management has changed greatly and rapidly. With the advent of enterprise systems, supply chains are now operating with up-to-the-minute information. The value of the information flow is marked by speed, accessibility, accuracy, and most of all relevancy. As it continually evolves, the supply chain management curriculum…
... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit... Employment and Training Administration Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles... Supply Chain Group, including leased workers from QFlex, North America Logistics and UPS...
This paper discusses how supply chain, risk and business continuity professionals can collaboratively address the consequences of increasing supply chain complexity in order to deliver both resilient and sustainable supply chains. The paper identifies the key drivers of complexity supported by recent case examples, including the equine DNA scandal and the Rana Plaza tragedy in Bangladesh.
The design and control of recycling systems of products with environmental risk have been discussed in the world already for a long time. The main reasons to address this subject are the followings: reduction of waste volume, intensification of recycling of materials, closing the loop, use of less resource, reducing environmental risk [1, 2]. The development of recycling systems is based on the integrated solution of technological and logistic resources and know-how . However the financial conditions of recycling systems is partly based on the recovery, disassembly and remanufacturing options of the used products [4, 5, 6], but the investment and operation costs of recycling systems can be characterised with high logistic costs caused by the geographically wide collection system with more collection level and a high number of operation points of the inverse supply chain. The reduction of these costs is a popular area of the logistics researches. These researches include the design and implementation of comprehensive environmental waste and recycling program to suit business strategies (global system), design and supply all equipment for production line collection (external system), design logistics process to suit the economical and ecological requirements (external system) . To the knowledge of the author, there has been no research work on supply chain design problems that purpose is the logistics oriented optimisation of inverse supply chain in the case of non-linear total cost function consisting not only operation costs but also environmental risk cost. The antecedent of this research is, that the author has taken part in some research projects in the field of closed loop economy ("Closing the loop of electr(on)ic products and domestic appliances from product planning to end-of-life technologies), environmental friendly disassembly (Concept for logistical and environmental disassembly technologies) and design of recycling systems of household appliances
Hijrah Abd Kadir, Muhammad; Zuraidah Raja Mohd Rasi, Raja; Omar, Siti Sarah; Manap, Zariq Imran Abdul
The quickly developing worldwide halal in business sector has given a remarkable window of chance, which empowers Malaysia to the renowned halal centre in worldwide (known as Halal-hubs). Malaysia also has proactively taken a lead in halal activities, which is presently considered as the benchmark for a halal framework worldwide. Malaysia also set up the Halal Industry Development Corporation (HDC) which driving a wide range of halal activities since the demand of halal food has increased significantly which is very crucial for a Muslim in ensuring its authenticity and integrity. Even in parallel to this developments, many studies has been conducted because there are many issues still occurs in the food industry. The issue of consumer awareness and understanding the halal principles, mixing of halal and non- halal products, halal certification and logo compliance with Shariah law and lack of regulation and enforcement need the serious attention by all parties along the supply chain. The challenges occur mainly in the halal food segregation and halal traceability of the products. The unit of analysis in this study different halal stakeholders group which are JAKIM, Halal Development Centre (HDC), Raw Material Manufacturers, Retailers and Government Agencies. This paper attempt discusses the issues and challenges occurs in the halal supply chain and faced by the practitioners as well as the relevant parties involved in the industry especially for food products manufacturers. The study would like to give a basic information about the issues and challenges in the contribution of Halal Supply Chain Management (HSCM) as well as for the future studies.
no requirement for the supplier to provide a coordination incentive and V=0. Total costs in this mode are denoted by TCc = TCb(Qc,Rc,0)+TCs(Qc,Nc,0...If the parties are not centralized but can coordinate their policies, the potential exists to divide cost savings of TC+ = TCd- TCc . An interval...comparison of the solutions in the decentralized and centralized models shows that the costs in the entire supply chain can be reduced by TC+ = TCd- TCc = 30
Approach Use neodymium iron boron magnet supply chain as basis for prototype Conduct literature review and canvass experts to identify desirable...Analysis 14K Neodymium Dysprosium Demand 15K 3000 1650 1250 50 4464 5952 5 5 14 40K 56.5K 990 China China 24K 91K China China China...Production Magnet Production Magnet Fabrication 9 14K Neodymium Dysprosium Demand 15K 3000 1650 1250 50 4464 5952 5 5 14 40K 56.5K 990
supply chain includes parts required to build, fix, or maintain aircraft delivered to the warfighter to carry out missions. Industry has shown that following Collaborative Planning, Forecasting, and Replenishment (CPFR) concepts, particularly reducing inventory through accurate demand forecasts, has increased profits in part by lowering the holding costs of inventory and increasing sales. This is analogous to the Air Force increasing aircraft availability. There is scant evidence that demand forecasts generated at any level in the Air Force are shared with the intent of
opinions of its research clients and sponsors. Support RAND Make a tax -deductible charitable contribution at www.rand.org/giving/contribute...actions, with the gray dot indicating the order placement or contract date for each, the pink dot indicating the first delivery associated with the
Enterprise Supply Chain Management consists of: Specifying suppliers to support inter-program and inter-agency efforts. Optimizing inventory levels and locations throughout the supply chain. Executing corrective actions to improve quality and lead time issues throughout the supply chain. Processing reported data to calculate and make visible supply chain performance (provide information for decisions and actions). Ensuring the right hardware and information is provided at the right time and in the right place. Monitoring the industrial base while developing, producing, operating and retiring a system. Seeing performance deep in the supply chain that could indicate issues affecting system availability and readiness.
Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno
Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.
Young, Richard R; Peterson, Matthew R
Much has been written about how emergency management (EM) needs to look to the future regarding issues of resource management (monetary, human, and material). Constraints on budgets are ongoing and the staffing of emergency response activities is often difficult because volunteers have little to no training. The management of material resources has also been a challenge because 1) the categories of material vary by the type of emergency, 2) the necessary quantities of material are often not located near the ultimate point of need, and 3) the transportation assets are rarely available in the form and quantity required to allow timely and effective response. The logistics and resource management functions of EM (what we refer to as EM logistics) have been largely reactive, with little to no pre-event planning for potential demand. We applied the Supply Chain Operational Reference (SCOR) model to EM logistics in an effort to transform it to an integrated and scalable system of physical, information, and financial flows into which are woven the functions of sourcing, making, delivering, and returning, with an overarching planning function that transcends the organizational boundaries of participants. The result is emergency supply chain management, which embraces many more participants who share in a larger quantity of more useful information about the resources that need to be deployed when responding to and recovering from emergency events.
Waldman, S A; Terzic, A
Personalized medicine epitomizes an evolving model of care tailored to the individual patient. This emerging paradigm harnesses radical technological advances to define each patient's molecular characteristics and decipher his or her unique pathophysiological processes. Translated into individualized algorithms, personalized medicine aims to predict, prevent, and cure disease without producing therapeutic adverse events. Although the transformative power of personalized medicine is generally recognized by physicians, patients, and payers, the complexity of translating discoveries into new modalities that transform health care is less appreciated. We often consider the flow of innovation and technology along a continuum of discovery, development, regulation, and application bridging the bench with the bedside. However, this process also can be viewed through a complementary prism, as a necessary supply chain of services and providers, each making essential contributions to the development of the final product to maximize value to consumers. Considering personalized medicine in this context of supply chain management highlights essential points of vulnerability and/or scalability that can ultimately constrain translation of the biological revolution or potentiate it into individualized diagnostics and therapeutics for optimized value creation and delivery.
Stamber, Kevin L.; Vugrin, Eric D.; Ehlen, Mark A.; Sun, Amy C.; Warren, Drake E.; Welk, Margaret E.
The U.S. chemical sector produces more than 70,000 chemicals that are essential material inputs to critical infrastructure systems, such as the energy, public health, and food and agriculture sectors. Disruptions to the chemical sector can potentially cascade to other dependent sectors, resulting in serious national consequences. To address this concern, the U.S. Department of Homeland Security (DHS) tasked Sandia National Laboratories to develop a predictive consequence modeling and simulation capability for global chemical supply chains. This paper describes that capability , which includes a dynamic supply chain simulation platform called N_ABLE(tm). The paper also presents results from a case study that simulates the consequences of a Gulf Coast hurricane on selected segments of the U.S. chemical sector. The case study identified consequences that include impacted chemical facilities, cascading impacts to other parts of the chemical sector. and estimates of the lengths of chemical shortages and recovery . Overall. these simulation results can DHS prepare for and respond to actual disruptions.
Moran, Daniel; Kanemoto, Keiichiro
While high-income countries have made significant strides since the 1970s in improving air quality, air pollution continues to rise in many developing countries and the world as a whole. A significant share of the pollution burden in developing countries can be attributed to production for export to consumers in high-income nations. However, it remains a challenge to quantify individual actors’ share of responsibility for pollution, and to involve parties other than primary emitters in cleanup efforts. Here we present a new spatially explicit modeling approach to link SO2, NO x , and PM10 severe emissions hotspots to final consumers via global supply chains. These maps show developed countries reducing their emissions domestically but driving new pollution hotspots in developing countries. This is also the first time a spatially explicit footprint inventory has been established. Linking consumers and supply chains to emissions hotspots creates opportunities for other parties to participate alongside primary emitters and local regulators in pollution abatement efforts.
Moore, Sean S; O'Sullivan, Kevin J; Verdecchia, Francesco
Stenting treatments for the management of disease in the heart, arterial and venous systems, biliary ducts, urethras, ureters, oesophageal tract and prostate have made enormous technical advances since their introduction into clinical use. The progression from metallic to polymer based bio-absorbable stents, coupled with the advances in additive manufacturing techniques, present a unique opportunity to completely re-envision the design, manufacture, and supply chain of stents. This paper looks at current stenting trends and proposes a future where the stent supply chain is condensed from ~150 days to ~20 min. The Cardiologist therefore has the opportunity to become a designer, manufacturer and user with patients receiving custom stents specific to their unique pathology that will be generated, delivered and deployed in the Cath-lab. The paper will outline this potentially revolutionary development and consider the technical challenges that will need to be overcome in order to achieve these ambitious goals. A high level overview of the generating eluting stents in situ program-GENESIS-is outlined including some early experimental work.
The mapping and analysis of supply chains is a technique increasingly used to address problems in the food system. Yet such supply chain management has not yet been applied as a means of encouraging healthier diets. Moreover, most policies recommended to promote healthy eating focus on the consumer end of the chain. This article proposes a consumption-oriented food supply chain analysis to identify the changes needed in the food supply chain to create a healthier food environment, measured in terms of food availability, prices, and marketing. Along with established forms of supply chain analysis, the method is informed by a historical overview of how food supply chains have changed over time. The method posits that the actors and actions in the chain are affected by organizational, financial, technological, and policy incentives and disincentives, which can in turn be levered for change. It presents a preliminary example of the supply of Coca-Cola beverages into school vending machines and identifies further potential applications. These include fruit and vegetable supply chains, local food chains, supply chains for health-promoting versions of food products, and identifying financial incentives in supply chains for healthier eating.
The mapping and analysis of supply chains is a technique increasingly used to address problems in the food system. Yet such supply chain management has not yet been applied as a means of encouraging healthier diets. Moreover, most policies recommended to promote healthy eating focus on the consumer end of the chain. This article proposes a consumption-oriented food supply chain analysis to identify the changes needed in the food supply chain to create a healthier food environment, measured in terms of food availability, prices, and marketing. Along with established forms of supply chain analysis, the method is informed by a historical overview of how food supply chains have changed over time. The method posits that the actors and actions in the chain are affected by organizational, financial, technological, and policy incentives and disincentives, which can in turn be levered for change. It presents a preliminary example of the supply of Coca-Cola beverages into school vending machines and identifies further potential applications. These include fruit and vegetable supply chains, local food chains, supply chains for health-promoting versions of food products, and identifying financial incentives in supply chains for healthier eating. PMID:23144674
Blos, Mauricio F; Wee, Hui-Ming; Yang, Joshua
Innovation challenges for handling supply chain risks have become one of the most important drivers in business competitiveness and differentiation. This study analyses competitiveness at the external supply chain level as a driver of risks and provides a framework for mitigating these risks. The mitigation framework, also called the supply chain continuity framework, provides insight into six stages of the business continuity planning (BCP) process life cycle (risk mitigation management, business impact analysis, supply continuity strategy development, supply continuity plan development, supply continuity plan testing and supply continuity plan maintenance), together with the operational constructs: customer service, inventory management, flexibility, time to market, ordering cycle time and quality. The purpose of the BCP process life cycle and operational constructs working together is to emphasise the way in which a supply chain can deal with disruption risks and, consequently, bring competitive advantage. Future research will consider the new risk scenarios and analyse the consequences to promote the improvement of supply chain resilience.
documented the fact that Unmanned Aerial Vehicles (now more commonly called drones ) added substantially to the quality of surveillance, resulting in better...Battalions. CACI Inc.-Federal, Arlington, Virginia. 1977. DTIC Accession Number ADA123481. Olmstead, Joseph A., B. Leon Elder, and John M...greater agility – Drones improved agility in ground and air operations – Nelson’s C2 at Trafalgar demonstrated agility. Theater Level C2 During WW II
Paxton, Joseph; Tucker, Brian
This paper will present a model that uses the Supply-Chain Operations Reference (SCOR) model as a foundation for a framework to illustrate the information needed throughout a product lifecycle to support a healthy supply chain management function and the subsequent contract requirements to enable it. It will also show where in the supply chain the information must be extracted. The ongoing case study used to exemplify the model is NASA's (National Aeronautics and Space Administration) Ares I program for human spaceflight. Effective supply chain management and contract requirements are ongoing opportunities for continuous improvement within government agencies, specifically development of systems for human spaceflight operations. Multiple reports from the Government Accountability Office (GAO) reinforce this importance. The SCOR model is a framework for describing a supply chain with process building blocks and business activities. It provides a set of metrics for measuring supply chain performance and best practices for continuously improving. This paper expands the application of the SCOR to also provide the framework for defining information needed from different levels of the supply chain and at different phases of the lifecycle. These needs can be incorporated into contracts to enable more effective supply chain management. Depending on the phase of the lifecycle, effective supply chain management will require involvement from different levels of the organization and different levels of the supply chain.
Boucher, D. H.
The palm oil industry has expanded rapidly in the last two decades, particularly in Indonesia. A considerable amount of this expansion has been at the expense of forests and peatlands, resulting in considerable greenhouse gas emissions. Now the industry is faced with two new challenges. There is a possible oversupply on the global market due to recent expansion and the time lag between clearing and new production coming on line, which may depress prices considerably. Furthermore, there is increasing pressure to reduce the industry's impact on climate and biodiversity, exemplified by the commitment by the businesses of the Consumer Goods Forum to eliminate deforestation from their supply chains by 2020. This presentation will examine the interaction between these two challenges and its implications for the industry, in both southeast Asia and new regions of expansion, and how this interaction could transform the industry's mode of expansion in the coming decade.
Stokes, Jennifer R.; Horvath, Arpad
This letter describes a comprehensive modeling framework and the Wastewater-Energy Sustainability Tool (WWEST) designed for conducting hybrid life-cycle assessments of the wastewater collection, treatment, and discharge infrastructure in the United States. Results from a case study treatment plant which produces electricity using methane offgas are discussed. The case study system supplements influent with 'high-strength organic waste' to augment electricity production. The system balance is 55 kg of greenhouse gases per million liters of wastewater. Sensitivity analysis confirms that reusing biogas from anaerobic digestion for electricity reduces life-cycle greenhouse gas emissions by nine times. When biogas is captured and reused for electricity, material production (e.g., chemicals and pipes) and the corresponding supply chains, rather than energy production, are responsible for most of the environmental effects. When biogas is flared, the material and energy production contributions are similar.
Herrera, Sandra Mejias; Huatuco, Luisa Huaccho
This article presents a conceptual model that combines Macroergonomics and Supply chain. The authors combine their expertise on these individual topics, building on their previous research. The argument of the paper is that human factors are key to achieve effective supplier-customer collaboration. A conceptual model is presented, its elements and their interactions are explained. The Content-Context-Process is applied as a departing point to this model. Macroergonomics aspects considered are: a systemic approach, participatory ergonomics, formation of ergonomics teams and evaluation of ergonomics projects. The expected outcomes are: (a) improvement of production and productivity levels, (b) improvement of the product quality, (c) Reduction of absenteeism, (d) Improvement in the quality of work life (from the employees' perspective), and (e) increase in the employees' contribution rate of ideas for improvement. A case study was carried out at a vitroplant production organisation incorporating environmental aspects to obtain sustainable benefits.
Hellingrath, Bernd; Witthaut, Markus; Böhle, Carsten; Brügger, Stephan
The currently completed ILIPT (Intelligent Logistics for Innovative Product Technologies) project was concerned with the concept of the “5 day car” (a customized car that is delivered within five days after its ordering) and encompassed extensive research on the required production and logistics network structures and processes. As car manufacturers in the automotive industry (commonly referred to as OEMs) rely heavily on their suppliers, the major challenge lies in the organization of inter-enterprise cooperation supported by information systems (IS) in an efficient manner. A common understanding of supply chain concepts is indispensable for this. Ontologies as formal representations of concepts can be used as a semantic basis for cooperation. Relevant results from ILIPT are presented followed by a concept as well as a prototype of how to transfer the theoretical findings to a practical implementation, in this case a multi-agent system.
Lin, Hsien-Jen; Lin, Yu-Jen
This study develops an integrated inventory system involving defective items and quantity discount for optimal pricing and ordering strategies. The model analysed in this study is one in which the buyer orders a quantity, the vendor produces more than buyer's order quantity in order to reduce set-up cost, and then he/she offers an all-units quantity discount to the buyer. Our objective is to determine the optimal order quantity, retail price, mark-up rate, and the number of shipments per production run from the vendor to the buyer, so that the entire supply chain joint total profit incurred has a maximum value. Furthermore, an algorithm of finding the optimal solution is developed. Numerical examples are provided to illustrate the theoretical results.
Minyard, R.J.; Strode, M.O.
The supply and distribution infrastructure of an LNG project requires project sponsors and LNG buyers to make large, interdependent capital investments. For a grassroots project, substantial investments may be necessary for each link in the supply chain: field development; liquefaction plant and storage; ports and utilities; ships; receiving terminal and related facilities; and end-user facilities such as power stations or a gas distribution network. The huge sums required for these projects make their finance ability critical to implementation. Lenders have become increasingly comfortable with LNG as a business and now have achieved a better understanding of the risks associated with it. Raising debt financing for many future LNG projects, however, will present new and increasingly difficult challenges. The challenge of financing these projects will be formidable: political instability, economic uncertainty, and local currency volatility will have to be recognized and mitigated. Described here is the evolution of financing LNG projects, including the Rasgas LNG project financing which broke new ground in this area. The challenges that lie ahead for sponsors seeking to finance future projects selling LNG to emerging markets are also discussed. And the views of leading experts from the field of project finance, specifically solicited for this article, address major issues that must be resolved for successful financing of these projects.
Bougdira, Abdesselam; Ahaitouf, Abdelaziz; Akharraz, Ismail
The supply chain sustainability becomes a necessity for a smooth, a rapid and a fluid economic transaction. To reach a sustainable supply chain, we propose to focus attention on products and their lifecycle. So, we consider the traceability as a major success key to ensure the supply chain sustainability. For that, we consider a supply chain design that use an intelligent products traced by an intelligent traceability system. This system identifies, restores history and properties of a product, besides it tracks, in real-time a product. This solution can, also, bring, in the product environment, appropriate adjustments to prevent any risk of threatening qualities for the product. So, it helps supply chain contributors making the sustainable adjustments and the instant benchmark of the supply chain sustainability.
Hernández, Jorge E.; Poler, Raúl; Mula, Josefa
In a supply chain management context, the enterprise architecture concept to efficiently support the collaborative processes among the supply chain members involved has been evolving. Each supply chain has an organizational structure that describes the hierarchical relationships among its members, ranging from centralized to decentralized organizations. From a decentralized perspective, each supply chain member is able to identify collaborative and non collaborative partners and the kind of information to be exchanged to support negotiation processes. The same concepts of organizational structure and negotiation rules can be applied to a multi-agent system. This paper proposes a novel supply chain architecture to support decentralized collaborative processes in supply chains by considering a multi-agent-based system modeling approach.
pbofbp= = = Demand Forecasting: DLA’S Aviation Supply Chain High Value Products 9 April, 2015 LCDR Mordocai Kiflu, USN LCDR Carlos Lopez, USN...APR 2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Demand Forecasting: DLA’S Aviation Supply Chain High...both achieve target service levels and quantify the risk of stock-outs in the DLA aviation supply chain. This vision culminated in a simple process
This project is a trial RFID Supply Chain Optimization pilot for the purpose of determining the optimal method to enhance supply chain capability and responsiveness by implementing RFID processes along with Lean/Six Sigma and e-commerce that is intended to be deployed into small and medium manufacturing and supply chain facilities. A key goal of this program is not only to comply with DOD shipping mandates, but also implement RFID solutions that will provide enhanced product visibility and reduced cost.
Chapter 1 The DASCh Experience: How to Model a Supply Chain H. Van Dyke Parunak Center for Electronic Commerce, ERIM 3600 Green Court, Suite 550... supply chain modeling, we have found agent-based modeling to be more flexible than ODE models for basic exploration. One phenomenon we discovered...Section 2 of this paper describes the supply chain problem. Section 3 reports the three models that we constructed. Section 4 reviews the roles of each
within the Department of Defense to facilitate further integration of the defense supply chain ? To answer this question, this thesis analyzed...successful strategies from three supply chain paradigms: Academic, Military, and Corporate. A research model was developed to evaluate and compare the three...paradigms according to six criteria. Each criterion represented a strategic structural requirement for an organization integrating its supply chain . Based
He, Xiangjun; Tang, Lingyun
Supply Chain Finance, as a new financing pattern, has been arousing general attentions of scholars at home and abroad since its publication. This paper describes the author's understanding towards supply chain finance, makes classification of its business patterns in China from different perspectives, analyzes the existing problems and deficiencies of the business patterns, and finally puts forward the notion of building a visualization platform to innovate the business operation patterns and risk control modes of domestic supply chain finance.
Peterson, Matthew R; Young, Richard R; Gordon, Gary A
Key elements of supply chain theory remain relevant to emergency management (EM) logistics activities. The Supply Chain Operations Reference model can also serve as a useful template for the planning, organizing, and execution of EM logistics. Through a series of case studies (developed through intensive survey of organizations and individuals responsible for EM), the authors identified the extent supply chain theory is being adopted and whether the theory was useful for emergency logistics managers. The authors found several drivers that influence the likelihood of an organization to implement elements of supply chain management: the frequency of events, organizational resources, population density, range of events, and severity of the disaster or emergency.
Wan Ahmad, Wan Nurul K; Rezaei, Jafar; Tavasszy, Lóránt A; de Brito, Marisa P
Our current dependency on the oil and gas (O&G) industry for economic development and social activities necessitates research into the sustainability of the industry's supply chains. At present, studies on sustainable supply chain management (SSCM) practices in the industry do not include firm-internal factors that affect the sustainability strategies employed by different functional areas of its supply chains. Our study aims to address this gap by identifying the relevant internal factors and exploring their relationship with SSCM strategies. Specifically, we discuss the commitment to and preparedness for sustainable practices of companies that operate in upstream and downstream O&G supply chain. We study the impact of these factors on their sustainability strategies of four key supply chain functions: supplier management, production management, product stewardship and logistics management. The analyses of data collected through a survey among 81 companies show that management preparedness may enhance sustainable supply chain strategies in the O&G industry more than commitment does. Among the preparedness measures, management of supply chain operational risks is found to be vital to the sustainability of all supply chain functions except for production management practices. The findings also highlight the central importance of supplier and logistics management to the achievement of sustainable O&G supply chains. Companies must also develop an organizational culture that encourages, for example, team collaboration and proactive behaviour to finding innovative sustainability solutions in order to translate commitment to sustainable practices into actions that can produce actual difference to their SSCM practices.
Sendhil Kumar, R.; Pugazhendhi, S.; Muralidharan, C.; Murali, S.
A supply chain is a very extensive concept, which encompasses many problems and features when it comes to controlling. Now a day’s lean concept is a very common method to several areas, such as service sectors and manufacturing. Applying the lean concept to supply chain management is a very popular study part, it has attracted many industrial practices and researchers with different applications. Information sharing and technology remain one of the key factors of integrating the supply chain members. Current scenario the competition is no longer between the competing companies, but it happens between the supply chains. So the efficiency of the supply chain is very important. And the effective sharing of information can enhance the supply chain efficiency through minimizing the inventories and Information sharing can increase supply chain efficiency by reducing inventories and stabilizing the production. This paper describes and discusses about the seven deadly wastes of supply chain information with the comparative principle of Toyota production system (TPS) principle approach. How the TPS can be applied to supply chain information sharing And lean tool of 5S concept possibility improve the information sharing.
Nagar, Lokesh; Dutta, Pankaj; Jain, Karuna
In the present day business scenario, instant changes in market demand, different source of materials and manufacturing technologies force many companies to change their supply chain planning in order to tackle the real-world uncertainty. The purpose of this paper is to develop a multi-objective two-stage stochastic programming supply chain model that incorporates imprecise production rate and supplier capacity under scenario dependent fuzzy random demand associated with new product supply chains. The objectives are to maximise the supply chain profit, achieve desired service level and minimise financial risk. The proposed model allows simultaneous determination of optimum supply chain design, procurement and production quantities across the different plants, and trade-offs between inventory and transportation modes for both inbound and outbound logistics. Analogous to chance constraints, we have used the possibility measure to quantify the demand uncertainties and the model is solved using fuzzy linear programming approach. An illustration is presented to demonstrate the effectiveness of the proposed model. Sensitivity analysis is performed for maximisation of the supply chain profit with respect to different confidence level of service, risk and possibility measure. It is found that when one considers the service level and risk as robustness measure the variability in profit reduces.
Koblen, Ivan; Lestyánszka Škůrková, Katarína
The introductory part of the paper underlines the importance of "Risk-based thinking" in the Quality Management System (QMS) and risk in the supply chain, as a principle part of the QMS. After introducing the key terms, the authors focused on the principle part of the article - explanation of the external and internal supply chain risks and the main factors concerning the supply risks, demand risks and environmental risks (as cardinal types of external supply chain risks) as well as the manufacturing and process risks, network/planning and control risks (as most important types of internal supply chain risks). The authors inform on the selected supply chain risk management tools, especially on those which are linked to the appropriate utilization of quality management tools.
Chen, Zhaobo; Teng, Chunxian; Zhang, Ding; Sun, Jiayi
This paper proposes a comprehensive model for studying supply chain versus supply chain competition with resource limitation and demand disruption. We assume that there are supply chains with heterogeneous supply network structures that compete at multiple demand markets. Each supply chain is comprised of internal and external firms. The internal firms are coordinated in production and distribution and share some common but limited resources within the supply chain, whereas the external firms are independent and do not share the internal resources. The supply chain managers strive to develop optimal strategies in terms of production level and resource allocation in maximising their profit while facing competition at the end market. The Cournot-Nash equilibrium of this inter-supply chain competition is formulated as a variational inequality problem. We further study the case when there is demand disruption in the plan-execution phase. In such a case, the managers need to revise their planned strategy in order to maximise their profit with the new demand under disruption and minimise the cost of change. We present a bi-criteria decision-making model for supply chain managers and develop the optimal conditions in equilibrium, which again can be formulated by another variational inequality problem. Numerical examples are presented for illustrative purpose.
Tucker, Brian; Paxton, Joseph
This paper will present a Supply Chain Readiness Level (SCRL) model that can be used to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. It will also show that using SCRL in conjunction with Technology Readiness Levels (TRLs), Manufacturing Readiness Levels (MRLs) and National Aeronautics Space Administrations (NASA s) Project Lifecycle Process will provide a more complete means of developing and evaluating a robust sustainable supply chain that encompasses the entire product, system and mission lifecycle. In addition, it will be shown that by implementing the SCRL model, NASA can additionally define supplier requirements to enable effective supply chain management (SCM). Developing and evaluating overall supply chain readiness for any product, system and mission lifecycle is critical for mission success. Readiness levels are presently being used to evaluate the maturity of technology and manufacturing capability during development and deployment phases of products and systems. For example, TRLs are used to support the assessment of the maturity of a particular technology and compare maturity of different types of technologies. MRLs are designed to assess the maturity and risk of a given technology from a manufacturing perspective. In addition, when these measurement systems are used collectively they can offer a more comprehensive view of the maturity of the system. While some aspects of the supply chain and supply chain planning are considered in these familiar metric systems, certain characteristics of an effective supply chain, when evaluated in more detail, will provide an improved insight into the readiness and risk throughout the supply chain. Therefore, a system that concentrates particularly on supply chain attributes is required to better assess enterprise supply chain readiness.
Xie, Dong; Xiao, Jie; Guo, Guangjun; Jiang, Tong
Radio Frequency Identification (RFID) is widely used to track and trace objects in traceability supply chains. However, massive uncertain data produced by RFID readers are not effective and efficient to be used in RFID application systems. Following the analysis of key features of RFID objects, this paper proposes a new framework for effectively and efficiently processing uncertain RFID data, and supporting a variety of queries for tracking and tracing RFID objects. We adjust different smoothing windows according to different rates of uncertain data, employ different strategies to process uncertain readings, and distinguish ghost, missing, and incomplete data according to their apparent positions. We propose a comprehensive data model which is suitable for different application scenarios. In addition, a path coding scheme is proposed to significantly compress massive data by aggregating the path sequence, the position, and the time intervals. The scheme is suitable for cyclic or long paths. Moreover, we further propose a processing algorithm for group and independent objects. Experimental evaluations show that our approach is effective and efficient in terms of the compression and traceability queries.
Xie, Dong; Xiao, Jie
Radio Frequency Identification (RFID) is widely used to track and trace objects in traceability supply chains. However, massive uncertain data produced by RFID readers are not effective and efficient to be used in RFID application systems. Following the analysis of key features of RFID objects, this paper proposes a new framework for effectively and efficiently processing uncertain RFID data, and supporting a variety of queries for tracking and tracing RFID objects. We adjust different smoothing windows according to different rates of uncertain data, employ different strategies to process uncertain readings, and distinguish ghost, missing, and incomplete data according to their apparent positions. We propose a comprehensive data model which is suitable for different application scenarios. In addition, a path coding scheme is proposed to significantly compress massive data by aggregating the path sequence, the position, and the time intervals. The scheme is suitable for cyclic or long paths. Moreover, we further propose a processing algorithm for group and independent objects. Experimental evaluations show that our approach is effective and efficient in terms of the compression and traceability queries. PMID:24737978
Su, Juning; Wu, Jiebing; Liu, Chenguang
In this paper, we propose two decision models for decentralized and centralized fresh produce supply chains with stochastic supply and demand and controllable transportation time. The optimal order quantity and the optimal transportation time in these two supply chain systems are derived. To improve profits in a decentralized supply chain, based on analyzing the risk taken by each participant in the supply chain, we design a set of contracts which can coordinate this type of fresh produce supply chain with stochastic supply and stochastic demand, and controllable transportation time as well. We also obtain a value range of contract parameters that can increase profits of all participants in the decentralized supply chain. The expected profits of the decentralized setting and the centralized setting are compared with respect to given numerical examples. Furthermore, the sensitivity analyses of the deterioration rate factor and the freshness factor are performed. The results of numerical examples show that the transportation time is shorter, the order quantity is smaller, the total profit of whole supply chain is less, and the possibility of cooperation between supplier and retailer is higher for the fresh produce which is more perishable and its quality decays more quickly.
A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...
Ramaswamy, Kizhanatham V.; Boyd, Joseph L.; Desai, Mayur
A graduate curriculum in Management Information Systems with a Supply Chain Management focus is presented. The motivation for this endeavor stems from the fact that the global scope of modern business organizations and the competitive environment in which they operate, requires an information system leveraged supply chain management system (SCM)…
Digital piracy and the emergence of new distribution channels have changed the dynamics of supply chain coordination and created many interesting problems. There has been increased attention to understanding the phenomenon of consumer piracy behavior and its impact on supply chain profitability. The purpose of this dissertation is to better…
Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; Busch, Ingrid; Richard Hess, J.; Roni, Mohammad S.; Hilbert, Jorge; Handler, Robert M.; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli
The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term `supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.
Gardner, Leslie L.
Since teachers are influential in high school students' career choices, enabling high school teachers to introduce educational and career opportunities in supply chain management is a viable strategy for reaching high school students about these opportunities. This article presents a pilot program of supply chain workshops to educate high school…
As a promising and emerging technology for supply chain management, Radio Frequency Identification (RFID) is a new alternative to existing tracking technologies and also allows a range of internal control and supply chain coordination. RFID has generated a significant amount of interest and activities from both practitioners and researchers in…
... Farm Service Agency Commodity Credit Corporation Information Collection Request: Web-Based Supply Chain... invitations, however, are issued throughout the month. Web-Based Supply Chain Management (WBSCM) allows... offerors electronically. Awarded contracts will be posted to the FSA Web site and also to the WBSCM...
Lautala, Pasi T; Hilliard, Michael R; Webb, Erin; Busch, Ingrid; Richard Hess, J; Roni, Mohammad S; Hilbert, Jorge; Handler, Robert M; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli
The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. The paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Finally gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.
listings now include the best business schools with a supply chain/logistics specialty. Not surprisingly, many of the top ranked MBA programs throughout...U.S. News & World Report also publishes a list of the best business schools in the specialty of supply chain/logistics. Their 2008 edition of
Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; Busch, Ingrid; Richard Hess, J.; Roni, Mohammad S.; Hilbert, Jorge; Handler, Robert M.; Bittencourt, Roger; Valente, Amir; Laitinen, Tuuli
The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmost importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.
Without total asset visibility, DLA’s retail focus has been on fulfilling retail requisitions rather than optimizing the overall supply chain performance...visibility across the NOMEX Supply Chain . A business case analysis was conducted to investigate potential cost benefits of the Data Model and its enabling
Initiative Network (SBInet) Supply Chain approach in the areas of lead times between repairs, spares inventory, and the identification of failure trends...The availability rate of the platform(s) needed to be improved because the current supply chain process enacted by the government did not work in a
This MBA Project documents a case study of an ongoing reorganization effort at the Supply Chain Management Center (SCMC), Marine Corps Logistics...Command (MARCORLOGCOM), and their use of the Supply Chain Operations Reference (SCOR) Model and the Balanced Scorecard (BSC) to develop performance
Shih, Stephen C; Rivers, Patrick A; Hsu, H Y Sonya
To gain and sustain competitive advantage, health-care providers have to continuously review and renovate their operational and information technology (IT) strategies through collaborative and cooperative endeavour with their supply chain channel members. This paper explores new ways of enhancing a health-care organization's responsiveness to changes and increasing its competitiveness through implementing strategic information technology alliances among channel members in a health-care supply chain network. An overview of issues and problems (e.g. bullwhip effect, negative externalities and free-riding phenomenon in multichannel supply chains) presented in the health-care supply chains is first delineated. This paper further goes over the issues of health-care supply chain coordination and integration for strategic IT alliances, followed by the discussion of the spillover effect of IT investments. A number of viable IT practices (such as information sharing and Internet-enabled supply chain portal) for effective health-care supply chain collaboration and coordination are then examined in this research. Finally, the paper discusses how strategic IT alliances can help improve the effectiveness of health-care supply chain management.
Jones, Michael A.; Cope, Robert; Budden, Michael C.
Supply chain management is an area of growing interest in both industry and academics. A number of new text books are available for courses in the area, and a number of Colleges of Business are adding relevant curriculum. However, questions arise as to what Supply Chain Management comprises, as to needed courses in the area, and an appropriate…
Ambe, I. M.
The main objective of the paper is to explore supply chain management practices in the Central District Municipality, North West province of South Africa, using the grounded theory methodology. Supply chain management was introduced in the South African public sector to alleviate deficiencies related to governance, interpretation and…
Kalafsky, Ronald V.; Conner, Neil
Global supply chains play an increasingly important role in the economy and should therefore be addressed within geography coursework, especially given concerns that geographers have not fully explored various angles of globalization. This article explores the use of an online case study on supply chains and their vulnerability to natural…
Ellinger, Alexander E.; Ellinger, Andrea D.
Purpose: There is an ongoing shortage of talented supply chain managers with the necessary skills and business-related competencies to manage increasingly complex and strategically important supply chain processes. The purpose of this paper is to propose that organizations can create and maintain competitive advantage by leveraging the expertise…
4 Sunil Chopra and Peter Meindl, Supply Chain Management: Strategy, Planning, and Operation, 5th ed. (Boston: Pearson Education, Inc., 2013), 339...Arlington, VA: Lexington Institute, 2005. Chopra, Sunil and Peter Meindl. Supply Chain Management: Strategy, Planning, and Operation. 5th ed. Boston
Soto-Viruet, Yadira; Menzie, W. David; Papp, John F.; Yager, Thomas R.
This report uses the supply chain of tantalum (Ta) to investigate the complexity of mineral and metal supply chains in general and show how they can be mapped. A supply chain is made up of all the manufacturers, suppliers, information networks, and so forth, that provide the materials and parts that go into making up a final product. The mineral portion of the supply chain begins with mineral material in the ground (the ore deposit); extends through a series of processes that include mining, beneficiation, processing (smelting and refining), semimanufacture, and manufacture; and continues through transformation of the mineral ore into concentrates, refined mineral commodities, intermediate forms (such as metals and alloys), component parts, and, finally, complex products. This study analyses the supply chain of tantalum beginning with minerals in the ground to many of the final goods that contain tantalum.
Kurdhi, N. A.; Irsanianto, S. T.; Sutanto
In this paper, we consider a production-inventory supply chain system with single-manufacturer and single-retailer. There are many types of contract that guarantee the supply chain. However, the administrative costs of the contract are usually neglected in real situation. The additional gain from integration may not cover the extra administrative costs may not addressed to supply chain. Therefore, a Stackelberg game and RFM policy are examined in order to investigate its performance on supply chain. The RFM policy is applied because its administrative costs are lower than othe policies. Although RFM policy is not capable of coordinating the channel, it leads to considerable improvements over the channel. The purpose of this research is to present a model of integrated policy, in which the goal is to maximize the whole system profit, and to evaluate decentralized-Stackelberg and RFM policies, in which individual firms in the supply chain have their own objectives and decisions to optimize.
Wilding, R; Cotton, S; Dobbin, J; Chapman, J; Yates, N
During 2009/2010 loss of platelets within NHS Blood and Transplant (NHSBT) due to time expiry was 9.3%. Hospitals remain reluctant to hold stocks of platelets due to the poor shelf life at issue. The purpose of this study was to identify areas for time compression in the apheresis platelet supply chain to extend the shelf life available for hospitals and reduce wastage in NHSBT. This was done within the context of NHSBT reconfiguring their supply chain and moving towards a consolidated and centralised approach. Time based process mapping was applied to identify value and non-value adding time in two manufacturing models. A large amount of the non-value adding time in the apheresis platelet supply chain is due to transportation and waiting for the next process in the manufacturing process to take place. Time based process mapping provides an effective 'lens' for supply chain professionals to identify opportunities for improvement in the platelet supply chain.
Suhaibah, A.; Uznir, U.; Anton, F.; Mioc, D.; Rahman, A. A.
Supply Chain Management (SCM) is the management of the products and goods flow from its origin point to point of consumption. During the process of SCM, information and dataset gathered for this application is massive and complex. This is due to its several processes such as procurement, product development and commercialization, physical distribution, outsourcing and partnerships. For a practical application, SCM datasets need to be managed and maintained to serve a better service to its three main categories; distributor, customer and supplier. To manage these datasets, a structure of data constellation is used to accommodate the data into the spatial database. However, the situation in geospatial database creates few problems, for example the performance of the database deteriorate especially during the query operation. We strongly believe that a more practical hierarchical tree structure is required for efficient process of SCM. Besides that, three-dimensional approach is required for the management of SCM datasets since it involve with the multi-level location such as shop lots and residential apartments. 3D R-Tree has been increasingly used for 3D geospatial database management due to its simplicity and extendibility. However, it suffers from serious overlaps between nodes. In this paper, we proposed a partition-based clustering for the construction of a hierarchical tree structure. Several datasets are tested using the proposed method and the percentage of the overlapping nodes and volume coverage are computed and compared with the original 3D R-Tree and other practical approaches. The experiments demonstrated in this paper substantiated that the hierarchical structure of the proposed partitionbased clustering is capable of preserving minimal overlap and coverage. The query performance was tested using 300,000 points of a SCM dataset and the results are presented in this paper. This paper also discusses the outlook of the structure for future reference.
Compas, Brian J
There are many links in the supply chain that can lead to a "break" in an organization's supply process. These breaks can waste professional and clinical time and take staff away from patient care activities. By paying attention to some key areas, designing efficient workflows, and monitoring supply usage, an organization can avoid the headaches of a supply process that doesn't optimize scarce labor resources. It also can lead to significant savings that go directly to the organization's bottom line. As with all hospital processes, some consistent and focused preventive medicine makes sense for its supply chain.
Easters, D. J.
Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.
Krystallis, Athanassios; Chryssochoidis, George; Scholderer, Joachim
Recent food scares have increased consumer concern about meat safety. However, the Greek 'traditional' meat supply chain from producers to local butchers does not seem to realise the pressing consumer demand for certified meat quality. Or is it that, in such food chains, this demand is not so pressing yet? The present paper seeks to answer this question based on a survey conducted in the Athens area, involving a sample of 268 participants responsible for food purchasing decisions. The survey mainly aims to develop an integrated model of factors that affect consumer-perceived meat quality and to develop the profile of different consumer segments in relation to these perceptions. The substantial findings of the survey include the fact that, despite their enormous per capita consumption, the majority of consumers are not particularly involved in the meat-purchasing process. Rather they attach importance to visual intrinsic quality cues evaluated in a pre-purchasing context. In this respect, intrinsic quality cues are assigned a role similar to that of quality certification; coupled with the choice of traditional channels and the resulting personal relation with the butcher, they can be understood as efforts to decrease risk of the purchasing decision. Moreover, consumers with such behaviour seem to relate domestic country of origin of meat mostly with perceptions of general safety. Finally, a small, but promising trend with substantial marketing implications of frequent purchases of chicken and pork at supermarkets should not be ignored.
Major oil companies sell gasoline through three channels of trade: branded (associated with long-term contracts), unbranded (associated with short-term contracts), and spot market. The branded channel provides them with a long-term secured and sustainable demand source, but requires an inflexible long-term commitment with demand and price risks. The unbranded channel provides a medium level of allocation flexibility. The spot market provides them with the greatest allocation flexibility to the changing market conditions, but the spot market's illiquidity mitigates this benefit. In order to sell the product in a profitable and sustainable way, they need an optimal contract portfolio. This dissertation addresses the contract portfolio optimization problem from different perspectives (retrospective view and forward-looking view) at different levels (strategic level, tactical level and operational level). The objective of the retrospective operational model is to develop a financial case to estimate the business value of having a dynamic optimization model and quantify the opportunity values missed in the past. This model proves the financial significance of the problem and provides top management valuable insights into the business. BP has applied the insights and principles gained from this work and implemented the model to the entire Midwest gasoline supply chain to retrospectively review optimization opportunities. The strategic model is the most parsimonious model that captures the essential economic tradeoffs among different contract types, to demonstrate the need for a contract portfolio and what drives the portfolio. We examine the properties of the optimal contract portfolio and provide a comparative statics analysis by changing the model parameters. As the strategic model encapsulates the business problem at the macroscopic level, the tactical model resolves lower level issues. It considers the time dynamics, the information flow and contracting flow. Using
Zamar, David S.; Gopaluni, Bhushan; Sokhansanj, Shahab; ...
Supply chain optimization for biomass-based power plants is an important research area due to greater emphasis on renewable power energy sources. Biomass supply chain design and operational planning models are often formulated and studied using deterministic mathematical models. While these models are beneficial for making decisions, their applicability to real world problems may be limited because they do not capture all the complexities in the supply chain, including uncertainties in the parameters. This study develops a statistically robust quantile-based approach for stochastic optimization under uncertainty, which builds upon scenario analysis. We apply and evaluate the performance of our approach tomore » address the problem of analyzing competing biomass supply chains subject to stochastic demand and supply. Finally, the proposed approach was found to outperform alternative methods in terms of computational efficiency and ability to meet the stochastic problem requirements.« less
Zamar, David S.; Gopaluni, Bhushan; Sokhansanj, Shahab; Newlands, Nathaniel K.
Supply chain optimization for biomass-based power plants is an important research area due to greater emphasis on renewable power energy sources. Biomass supply chain design and operational planning models are often formulated and studied using deterministic mathematical models. While these models are beneficial for making decisions, their applicability to real world problems may be limited because they do not capture all the complexities in the supply chain, including uncertainties in the parameters. This study develops a statistically robust quantile-based approach for stochastic optimization under uncertainty, which builds upon scenario analysis. We apply and evaluate the performance of our approach to address the problem of analyzing competing biomass supply chains subject to stochastic demand and supply. Finally, the proposed approach was found to outperform alternative methods in terms of computational efficiency and ability to meet the stochastic problem requirements.
Chai, Jia Yee; Sakaguchi, Tatsuhiko; Shirase, Keiichi
Trends of globalization and advances in Information Technology (IT) have created opportunity in collaborative manufacturing across national borders. A dynamic supply chain utilizes these advances to enable more flexibility in business cooperation. This research proposes a concurrent decision making framework for a three echelons dynamic supply chain model. The dynamic supply chain is formed by autonomous negotiation among agents based on multi agents approach. Instead of generating negotiation aspects (such as amount, price and due date) arbitrary, this framework proposes to utilize the information available at operational level of an organization in order to generate realistic negotiation aspect. The effectiveness of the proposed model is demonstrated by various case studies.
Yang, Hongxiong; Sun, Xiongle
The fairness concern is introduced into a closed-loop supply chain, which includes a manufacturer and a retailer. This paper study the effect of fairness concern on wholesale price, retail price, recycling prices, manufacturer profits and retails profits under two situation: only the manufacturer is fairness concern and only the retailer is fairness concern. Studies show that: Retailer's fairness concern will reduce the price of the wholesale price, while the retail price and the recycling price unchanged, which led to the retailer to get more supply chain profits. Manufacturers' fairness concerns will raise the wholesale price, thereby increasing the manufacturer's supply chain profit, and the retailer's profit is compromised.
Hu, Jinsong; Xu, Yuanji
Consumer return is considered in a coordination of a supply chain consisting of one manufacturer and one retailer. A distribution free approach is employed to deal with a centralized decision model and a decentralized model which are constructed under the situation with only knowing the demand function's mean and variance, respectively. A markdown money contract is designed to coordinate the supply chain, and it is also proved that the contract can make the supply chain perfectly coordinated. Several numerical examples are given at the end of this paper.
Elmuti, Dean; Khoury, Grace; Omran, Omar; Abou-Zaid, Ahmed S
This article explores current supply chain management challenges and initiatives and identifies problems that affect supply chain management success in the U.S. health-care industry. In addition, it investigates the impact of health care supply chain management (SCM) initiatives on the overall organizational effectiveness. The attitudinal results, as well as the performance results presented in this study support the claim of health care proponents that the SCM allows organizations to reduce cost, improve quality, and reduce cycle time, and leads to high performance.
Gerhart, Bobbie; Baskel, Chris; Van Drasek, Jim; Downing, Scott
Supply-chain management--the art of getting the most at the least cost from the products and services purchased by an organization--has transformed industries such as manufacturing and retailing, and can potentially do the same for healthcare. VHA is committed to keeping its members educated on current thinking and best practices in supply-chain management. In support of that mission, four supply chain experts gathered in Chicago recently at Modern Healthcare's offices to discuss the issues they face in their organizations and the strategies they've found most successful in addressing them.
Benhida, Khalid; Azougagh, Yassine; Elfezazi, Said
This study is interested on the modelling of the logistics flows in a supply chain composed on a production sites and a logistics platform. The contribution of this research is to develop an analytical model (integrated linear programming model), based on a case study of a real company operating in the phosphate field, considering a various constraints in this supply chain to resolve the planning problems for a better decision-making. The objectives of this model is to determine and define the optimal quantities of different products to route, to and from the various entities in the supply chain studied.
Vilko, Jyri; Ritala, Paavo; Hallikas, Jukka
Supply chain complexity and disintegration lead to increased uncertainty from a stakeholders' perspective, which is emerging as one of the major challenges of risk management. The ability to identify risks has weakened, as the responsibility of supply chain risk management is handed over to outside service providers. Regardless, the risks, their visibility and their impact depend on the position of the companies in the supply chain. The actors in the chain must therefore collaborate to create effective risk management conditions. This challenging situation is especially pronounced in multimodal maritime supply chains, where the risks and actor focality are high. This paper contributes to current risk management literature by providing a holistic and systemic view of risk visibility and control in maritime supply chains. The study employs broad-based, qualitative interview data collected from actors operating in southern Finland and the Gulf of Finland as well as an expert-panel assessment of the related risk management abilities. The results show a high level of variance in the level of risk identification and visibility between the actors in question. This further suggests that collaboration in supply chain risk management is essential, as an awareness of the risks and their control mechanisms do not necessarily reside in the same company.
Masanet, Eric; Kramer, Klaas Jan; Homan, Gregory; Brown, Richard; Worrell, Ernst
This paper summarizes a modeling framework that characterizes the key underlying technologies and processes that contribute to the supply chain energy use and greenhouse gas (GHG) emissions of a variety of goods and services purchased by U.S. consumers. The framework couples an input-output supply chain modeling approach with"bottom-up" fuel end use models for individual IO sectors. This fuel end use modeling detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the supply chain energy and GHG"footprints" of goods and services. To illustrate the policy-relevance of thisapproach, a case study was conducted to estimate achievable household GHG footprint reductions associated with the adoption of best practice energy-efficient supply chain technologies.
Iakovou, Eleftherios; Vlachos, Dimitrios; Xanthopoulos, Anastasios
As companies continue to globalise their operations and outsource significant portion of their value chain activities, they often end up relying heavily on order replenishments from distant suppliers. The explosion in long-distance sourcing is exposing supply chains and shareholder value at ever increasing operational and disruption risks. It is well established, both in academia and in real-world business environments, that resource flexibility is an effective method for hedging against supply chain disruption risks. In this contextual framework, we propose a single period stochastic inventory decision-making model that could be employed for capturing the trade-off between inventory policies and disruption risks for an unreliable dual sourcing supply network for both the capacitated and uncapacitated cases. Through the developed model, we obtain some important managerial insights and evaluate the merit of contingency strategies in managing uncertain supply chains.
Lam, C. Y.; Ip, W. H.
A higher degree of reliability in the collaborative network can increase the competitiveness and performance of an entire supply chain. As supply chain networks grow more complex, the consequences of unreliable behaviour become increasingly severe in terms of cost, effort and time. Moreover, it is computationally difficult to calculate the network reliability of a Non-deterministic Polynomial-time hard (NP-hard) all-terminal network using state enumeration, as this may require a huge number of iterations for topology optimisation. Therefore, this paper proposes an alternative approach of an improved spanning tree for reliability analysis to help effectively evaluate and analyse the reliability of collaborative networks in supply chains and reduce the comparative computational complexity of algorithms. Set theory is employed to evaluate and model the all-terminal reliability of the improved spanning tree algorithm and present a case study of a supply chain used in lamp production to illustrate the application of the proposed approach.
Demand forecasting is one of the main causes of the bullwhip effect in a supply chain. As a countermeasure for demand uncertainty as well as a risk-sharing mechanism for demand forecasting in a supply chain, this article studies a bilateral contract with order quantity flexibility. Under the contract, the buyer places orders in advance for the predetermined horizons and makes minimum purchase commitments. The supplier, in return, provides the buyer with the flexibility to adjust the order quantities later, according to the most updated demand information. To conduct comparative simulations, four-echelon supply chain models, that employ the contracts and different forecasting techniques under dynamic market demands, are developed. The simulation outcomes show that demand fluctuation can be effectively absorbed by the contract scheme, which enables better inventory management and customer service. Furthermore, it has been verified that the contract scheme under study plays a role as an effective coordination mechanism in a decentralised supply chain.
Hill, C A
This paper's topic is the use of information technology (IT) for the development of supply chain management (SCM). In today's business environment, both in academics and industry, the term SCM has become a popular paradigm. In particular, the use of IT to facilitate the development of supply chain partners is gaining interest within industry. This paper develops the topic of SCM and further develops the relationship between the use of IT, in the form of electronic data interchange, and the development of supply chain integration. The goal of using SCM along with IT is to develop a supply chain that is capable of responding more quickly and efficiently in the meeting of consumer's requirements.
This EPA webinar-slide presentation provides information on how sustainability directors and other staff can meet their goals of cutting costs and carbon emissions from their supply chain by using the resources provided by the SmartWay program.
Mahfouz, Amr; Arisha, Amr
Satisfying customers by delivering demands at agreed time, with competitive prices, and in satisfactory quality level are crucial requirements for supply chain survival. Incidence of risks in supply chain often causes sudden disruptions in the processes and consequently leads to customers losing their trust in a company's competence. Rush orders are considered to be one of the main types of supply chain risks due to their negative impact on the overall performance, Using integrated definition modeling approaches (i.e. IDEF0 & IDEF3) and simulation modeling technique, a comprehensive integrated model has been developed to assess rush order risks and examine two risk mitigation strategies. Detailed functions sequence and objects flow were conceptually modeled to reflect on macro and micro levels of the studied supply chain. Discrete event simulation models were then developed to assess and investigate the mitigation strategies of rush order risks, the objective of this is to minimize order cycle time and cost.
...The Chief Financial Officer and Assistant Secretary for Administration, with the concurrence of the General Services Administration, renewed the Charter for the Advisory Committee on Supply Chain Competitiveness on November 20,...
Zhang, Yong; Jiang, Yunjian
Waste cooking oil (WCO)-for-biodiesel conversion is regarded as the "waste-to-wealthy" industry. This paper addresses the design of a WCO-for-biodiesel supply chain at both strategic and tactical levels. The supply chain of this problem is studied, which is based on a typical mode of the waste collection (from restaurants' kitchen) and conversion in the cities. The supply chain comprises three stakeholders: WCO supplier, integrated bio-refinery and demand zone. Three key problems should be addressed for the optimal design of the supply chain: (1) the number, sizes and locations of bio-refinery; (2) the sites and amount of WCO collected; (3) the transportation plans of WCO and biodiesel. A robust mixed integer linear model with muti-objective (economic, environmental and social objectives) is proposed for these problems. Finally, a large-scale practical case study is adopted based on Suzhou, a city in the east of China, to verify the proposed models.
Kaufmann, Judith R; Miller, Roger; Cheyne, James
In the next decade, at least twelve additional vaccines that target such diseases as typhoid, malaria, and dengue will become available to lower- and middle-income countries. These vaccines must travel along what are called supply chains, which include all personnel, systems, equipment, and activities involved in ensuring that vaccines are effectively delivered from the point of production to the people who need them. But for various reasons, supply chains are already strained in many developing countries, and the potential inability to distribute new vaccines will place lives at risk. Among the many steps needed to strengthen the global vaccine supply chain, we suggest that the international community pursue improved coordination between organizations that donate and ship vaccines and the host-country officials who receive and distribute the vaccines, as well as better training for supply-chain managers.
Mircetic, Dejan; Nikolicic, Svetlana; Maslaric, Marinko; Ralevic, Nebojsa; Debelic, Borna
Demand forecasting is one of the key activities in planning the freight flows in supply chains, and accordingly it is essential for planning and scheduling of logistic activities within observed supply chain. Accurate demand forecasting models directly influence the decrease of logistics costs, since they provide an assessment of customer demand. Customer demand is a key component for planning all logistic processes in supply chain, and therefore determining levels of customer demand is of great interest for supply chain managers. In this paper we deal with exactly this kind of problem, and we develop the seasonal Autoregressive IntegratedMoving Average (SARIMA) model for forecasting demand patterns of a major product of an observed beverage company. The model is easy to understand, flexible to use and appropriate for assisting the expert in decision making process about consumer demand in particular periods.
Xue, Xiao; Zhang, Jibiao; Wang, Yang
As a new type of management pattern, "cluster supply chain" (CSC) can help SMEs to face the global challenges through all kinds of collaboration. However, a major challenge in implementing CSC is the gap between theory and practice in the field. In an effort to provide a better understanding of this emerging phenomenon, this paper presents the implementation process of CSC in the context of JingCheng Mechanical & Electrical Holding co., ltd.(JCH) as a case study. The cast study of JCH suggests that the key problems in the practice of cluster supply chain: How do small firms use cluster supply chain? Only after we clarify the problem, the actual construction and operation of cluster supply chain does show successful results as it should be.
Coustasse, Alberto; Tomblin, Shane; Slack, Chelsea
Supply costs account for more than one-third of the average operating budget and constitute the second largest expenditure in hospitals. As hospitals have sought to reduce these costs, radio-frequency identification (RFID) technology has emerged as a solution. This study reviews existing literature to gauge the recent and potential impact and direction of the implementation of RFID in the hospital supply chain to determine current benefits and barriers of adoption. Findings show that the application of RFID to medical equipment and supplies tracking has resulted in efficiency increases in hospitals with lower costs and increased service quality. RFID technology can reduce costs, improve patient safety, and improve supply chain management effectiveness by increasing the ability to track and locate equipment, as well as monitoring theft prevention, distribution management, and patient billing. Despite ongoing RFID implementation in the hospital supply chain, barriers to widespread and rapid adoption include significant total expenditures, unclear return on investment, and competition with other strategic imperatives.
Zhang, Min; Li, Peichong
Agri-food supply chain management (SCM), a management method to optimize internal costs and productivities, has evolved as an application of e-business technologies. These days, RFID has been widely used in many fields. In this paper, we analyze the characteristics of agri-food supply chain. Then the disadvantages of RFID are discussed. After that, we study the application strategies of RFID based on benefit and safety degree.
Lautala, Pasi T.; Hilliard, Michael R.; Webb, Erin; ...
The biomass supply chain is one of the most critical elements of large-scale bioenergy production and in many cases a key barrier for procuring initial funding for new developments on specific energy crops. Most productions rely on complex transforming chains linked to feed and food markets. The term 'supply chain' covers various aspects from cultivation and harvesting of the biomass, to treatment, transportation, and storage. After energy conversion, the product must be delivered to final consumption, whether it is in the form of electricity, heat, or more tangible products, such as pellets and biofuels. Effective supply chains are of utmostmore » importance for bioenergy production, as biomass tends to possess challenging seasonal production cycles and low mass, energy and bulk densities. Additionally, the demand for final products is often also dispersed, further complicating the supply chain. The goal of this paper is to introduce key components of biomass supply chains, examples of related modeling applications, and if/how they address aspects related to environmental metrics and management. The paper will introduce a concept of integrated supply systems for sustainable biomass trade and the factors influencing the bioenergy supply chain landscape, including models that can be used to investigate the factors. Our paper will also cover various aspects of transportation logistics, ranging from alternative modal and multi-modal alternatives to introduction of support tools for transportation analysis. Lastly, gaps and challenges in supply chain research are identified and used to outline research recommendations for the future direction in this area of study.« less
This briefing demonstrates the operation of DRAM using the neodymium -iron-boron (NdFeB) magnet supply chain as a test case. It can also serve as a...is necessary to assess risk more precisely and to evaluate and support proposed risk mitigation measures. Develop DRAM—Approach Use neodymium ...the specific approach taken to develop the DRAM methodology and build a prototype supply chain model for neodymium iron boron (NdFeB) magnets. These
Godar, Javier; Suavet, Clément; Gardner, Toby A.; Dawkins, Elena; Meyfroidt, Patrick
To date, assessments of the sustainability of agricultural commodity supply chains have largely relied on some combination of macro-scale footprint accounts, detailed life-cycle analyses and fine-scale traceability systems. Yet these approaches are limited in their ability to support the sustainability governance of agricultural supply chains, whether because they are intended for coarser-grained analyses, do not identify individual actors, or are too costly to be implemented in a consistent manner for an entire region of production. Here we illustrate some of the advantages of a complementary middle-ground approach that balances detail and scale of supply chain transparency information by combining consistent country-wide data on commodity production at the sub-national (e.g. municipal) level with per shipment customs data to describe trade flows of a given commodity covering all companies and production regions within that country. This approach can support supply chain governance in two key ways. First, enhanced spatial resolution of the production regions that connect to individual supply chains allows for a more accurate consideration of geographic variability in measures of risk and performance that are associated with different production practices. Second, identification of key actors that operate within a specific supply chain, including producers, traders, shippers and consumers can help discriminate coalitions of actors that have shared stake in a particular region, and that together are capable of delivering more cost-effective and coordinated interventions. We illustrate the potential of this approach with examples from Brazil, Indonesia and Colombia. We discuss how transparency information can deepen understanding of the environmental and social impacts of commodity production systems, how benefits are distributed among actors, and some of the trade-offs involved in efforts to improve supply chain sustainability. We then discuss the challenges and
supply chain management logistics strategy, measure performance compared to companies with more traditional logistics strategies and how each of these two groups rate their performance measures in terms of effectiveness. Little research has been published in the area of warehouse performance measurements and this research provides exploratory information. In order to properly distinguish which companies use supply chain management versus companies which use a traditional logistics strategy, this study also provides a comprehensive literature review on
supply chain approach for the U.S. Army. Contents: I. Background 1. Persistent Challenges 2. Purpose 3. Scope 4. Organization II. Project Overview 1. Background - The Immediate Problem 2. Conceptual Approach - Current Logistics Structure 3. Application of Supply Chain Concepts - Analytical Foundations for Improving Logistics System Effectiveness III. Multi-stage Approach - Analysis of Systemic Challenges 1. Readiness Production Stage 2. Operational Mission and Training Demand Stage 3. Retail Stage 4. Retrograde/Reverse Logistics Stage 5.
This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights. PMID:25197696
Kumar, Sameer; Tiffany, Maryellen; Vaidya, Salil
The swift growth of e-commerce or e-tailing as a consumer retail channel has made it a serious competitor to traditional retail channels and is changing consumers' purchasing behaviour. The purpose of this case study, based on Target and Amazon.com, is to analyse the attributes of traditional retailing, e-tailing, and hybrid supply chain models to form conclusions about the feasibility of an idealised supply chain model for the future. An integrated and generalised modelling framework is used that incorporates Six Sigma - define, measure, analyse, improve, control methodology leveraging various tools, including process flow maps, cause and effect diagram, performance efficiency metrics, failure mode and effects analysis (FMEA), and Monte Carlo simulation. Based on this analysis and research, the conclusion is that the idealised supply chain of the future may evolve into a hybrid supply chain, which includes both e-tail and retail channels. The main recommendations from this study include assessing the risks of migrating to such a hybrid supply chain and to leverage the recommended actions provided in the hybrid FMEA. To facilitate more effective and mature processes, this study can guide researchers in exhaustive empirical evaluations of hybrid supply chains, gather experiences and lessons learned for practitioners.
Li, Liying; Wang, Yong
This study investigates the channel coordination issue of a supply chain with a risk-neutral manufacturer and a loss-averse retailer facing stochastic demand that is sensitive to sales effort. Under the loss-averse newsvendor setting, a distribution-free gain/loss-sharing-and-buyback (GLB) contract has been shown to be able to coordinate the supply chain. However, we find that a GLB contract remains ineffective in managing the supply chain when retailer sales efforts influence the demand. To effectively coordinate the channel, we propose to combine a GLB contract with sales rebate and penalty (SRP) contract. In addition, we discover a special class of gain/loss contracts that can coordinate the supply chain and arbitrarily allocate the expected supply chain profit between the manufacturer and the retailer. We then analyze the effect of loss aversion on the retailer's decision-making behavior and supply chain performance. Finally, we perform a numerical study to illustrate the findings and gain additional insights.
Sulistio, Joko; Thoif, Afifuddin; Fitri Alindira, Aulia
— In 2007, the government launched a conversion program of kerosene to LPG by issuing a Presidential Regulation No. 104/2007 on Supply, Distribution and Pricing LPG 3 Kg. Article 2 on the regulation says that setting the supply, distribution, and pricing of LPG 3 Kg include planning an annual sales volume of enterprises, the reference price and the retail price and conditions of export and import of LPG 3 Kg in order to reduce subsidies Kerosene especially to divert the use of kerosene according to government policy. In principle, the purpose of this policy is to reduce energy subsidies on commodities, especially Kerosene. Although the government claimed the conversion program is success, there are few problems arising from conversion program. In 2014, many scarcity and high price of LPG 3 Kg were reported. In this case, Pertamina was given full authority to manage all supply chain and distribution. Because the root of the problem of scarcity that occurred in the supply chain system has not been explained, the proposed solutions will also be partial and not comprehensive. Thus, this research will build a structural map of the causes of supply chain system LPG 3 Kg, as well as providing a comprehensive picture of system dynamics of LPG 3 Kg supply chain system which applied in Indonesia. And the result is expected as in form of Causal Loop Diagram of supply chain system.
production, cited by 40 percent • natural disasters, including earthquakes, floods, hurricanes, tornados, tsunamis, and volcanic eruptions , cited by... volcanic eruption in Iceland, which are peripherally connected to the global supply network, can also create disruptions that require management...reduced Volcanic eruptions Flight cancellations Floods Capacities of high-tech and automotive industries reduced Labor unrest Chinese factory riots
The resilience of food supply chain (FSC) to disruptions has not kept pace with the extended, globalized and complex network of modern food chain. This chapter presents a holistic view of the FSC, interactions among its components, risks and vulnerabilities of disruption in the context of natural d...
... Chain Risk (NOV 2013) (a) Definitions. As used in this clause— Information technology (see 40 U.S.C... service or the furnishing of a product. (2) The term “information technology” includes computers... related resources. (3) The term “information technology” does not include any equipment acquired by...
Finding Optimal Policies • Supplier would like to operate in a centralized supply chain → Define: TCc (Q,R,N) = TCb(Q,R,0)+ TCs(Q,N,0) (Q∗c, R∗c,N∗c...ArgMin (Q,R,N) TCc (Q,R,N) → Solution: Q∗c = 909, R∗c = 1004, N∗c = 1 → TCcb = 4955.9, TCcs = 1649.9, TCc = 6605.8 → Coordination can save: TC...TCd− TCc = 7704.4−6605.8 = 1098.5 24 Observations • Buyer prefers a decentralized supply chain: TCdb < TCcb • Supplier prefers a centralized supply
Agwunobi, John; London, Paul A
Improved supply-chain management and high-volume purchasing have benefited other industries. This same approach could also reduce health care costs. Streamlining layers in the supply chain and using purchasing volume to reduce prices can save money and may improve care. Providing access to in-store health clinics and low-cost generic drugs are examples of how this approach is being tested by mass retailers. We examine lessons learned from these and similar initiatives and identify opportunities to cut the costs of generic and name-brand drugs, medical supplies, over-the-counter remedies, and vision care.
supply chain that satisfies uncertain, non-stationary demands, while taking into account the volatility and singularity of military operations This research focuses on the development of a modeling framework that determines the optimal deployment of transportation assets and supplies at the operational level, with possible interdiction by enemy forces, We term this model, Optimal Military Logistics Supply Chain (OPTiMiLSC), This is a two-level, multiple time period scenario-based stochastic model OPTiMiLSC uses a combination of optimization,
Hanes, Rebecca J.; Carpenter, Alberta
When evaluated at the scale of individual processes, next-generation technologies may be more energy and emissions intensive than current technology. However, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Materials Flow through Industry (MFI) supply chain modeling tool. The MFI tool is a cradle-to-gate linear network model of the US industrial sector that can model a wide range of manufacturing scenarios, including changes in production technology and increases in industrial energy efficiency. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing three lightweight vehicle supply chains to the supply chain of a conventional, standard weight vehicle. Several of the lightweight vehicle supply chains are evaluated under manufacturing scenarios that include next-generation production technologies and next-generation materials. Results indicate that producing lightweight vehicles is more energy and emission intensive than producing the non-lightweight vehicle, but the fuel saved during vehicle use offsets this increase. In this case study, greater reductions in supply chain energy and emissions were achieved through the application of the next-generation technologies than from application of energy efficiency increases.
Hanes, Rebecca J.; Carpenter, Alberta
When evaluated at the process level, next-generation technologies may be more energy and emissions intensive than current technology. However, many advanced technologies have the potential to reduce material and energy consumption in upstream or downstream processing stages. In order to fully understand the benefits and consequences of technology deployment, next-generation technologies should be evaluated in context, as part of a supply chain. This work presents the Material Flows through Industry (MFI) scenario modeling tool. The MFI tool is a cradle-to-gate linear network model of the U.S. industrial sector that can model a wide range of manufacturing scenarios, including changes in production technology, increases in industrial energy efficiency, and substitution between functionally equivalent materials. The MFI tool was developed to perform supply chain scale analyses in order to quantify the impacts and benefits of next-generation technologies and materials at that scale. For the analysis presented in this paper, the MFI tool is utilized to explore a case study comparing a steel supply chain to the supply chains of several functionally equivalent materials. Several of the alternatives to the baseline steel supply chain include next-generation production technologies and materials. Results of the case study show that aluminum production scenarios can out-perform the steel supply chain by using either an advanced smelting technology or an increased aluminum recycling rate. The next-generation material supply chains do not perform as well as either aluminum or steel, but may offer additional use phase reductions in energy and emissions that are outside the scope of the MFI tool. Future work will combine results from the MFI tool with a use phase analysis.
Nguyen, Ruby Thuy; Imholte, D. Devin
As the demand for personal electronic devices, wind turbines, and electric vehicles increases, the world becomes more dependent on rare earth elements. Given the volatile, Chinese-concentrated supply chain, global attempts have been made to diversify supply of these materials. However, the overall effect of supply diversification on the entire supply chain, including increasing low-value rare earth demand, is not fully understood. This paper is the first attempt to shed some light on China’s supply chain from both demand and supply perspectives, taking into account different Chinese policies such as mining quotas, separation quotas, export quotas, and resource taxes. We constructed a simulation model using Powersim Studio that analyzes production (both legal and illegal), production costs, Chinese and rest-of-world demand, and market dynamics. We also simulated new demand of an automotive aluminum-cerium alloy in the U.S. market starting from 2018. Results showed that market share of the illegal sector has grown since 2007 to 2015, ranging between 22% and 25% of China’s rare earth supply, translating into 59–65% illegal heavy rare earths and 14–16% illegal light rare earths. There would be a shortage in certain light and heavy rare earths given three production quota scenarios and constant demand growth rate from 2015 to 2030. The new simulated Ce demand would require supply beyond that produced in China. Lastly, we illustrated revenue streams for different ore compositions in China in 2015.
Nguyen, Ruby Thuy; Imholte, D. Devin
As the demand for personal electronic devices, wind turbines, and electric vehicles increases, the world becomes more dependent on rare earth elements. Given the volatile, Chinese-concentrated supply chain, global attempts have been made to diversify supply of these materials. However, the overall effect of supply diversification on the entire supply chain, including increasing low-value rare earth demand, is not fully understood. This paper is the first attempt to shed some light on China's supply chain from both demand and supply perspectives, taking into account different Chinese policies such as mining quotas, separation quotas, export quotas, and resource taxes. We constructed a simulation model using Powersim Studio that analyzes production (both legal and illegal), production costs, Chinese and rest-of-world demand, and market dynamics. We also simulated new demand of an automotive aluminum-cerium alloy in the US market starting from 2018. Results showed that market share of the illegal sector has grown since 2007-2015, ranging between 22% and 25% of China's rare earth supply, translating into 59-65% illegal heavy rare earths and 14-16% illegal light rare earths. There will be a shortage in certain light and heavy rare earths given three production quota scenarios and constant demand growth rate from 2015 to 2030. The new simulated Ce demand would require supply beyond that produced in China. Finally, we illustrate revenue streams for different ore compositions in China in 2015.
Nguyen, Ruby Thuy; Imholte, D. Devin
As the demand for personal electronic devices, wind turbines, and electric vehicles increases, the world becomes more dependent on rare earth elements. Given the volatile, Chinese-concentrated supply chain, global attempts have been made to diversify supply of these materials. However, the overall effect of supply diversification on the entire supply chain, including increasing low-value rare earth demand, is not fully understood. This paper is the first attempt to shed some light on China’s supply chain from both demand and supply perspectives, taking into account different Chinese policies such as mining quotas, separation quotas, export quotas, and resource taxes. We constructedmore » a simulation model using Powersim Studio that analyzes production (both legal and illegal), production costs, Chinese and rest-of-world demand, and market dynamics. We also simulated new demand of an automotive aluminum-cerium alloy in the U.S. market starting from 2018. Results showed that market share of the illegal sector has grown since 2007 to 2015, ranging between 22% and 25% of China’s rare earth supply, translating into 59–65% illegal heavy rare earths and 14–16% illegal light rare earths. There would be a shortage in certain light and heavy rare earths given three production quota scenarios and constant demand growth rate from 2015 to 2030. The new simulated Ce demand would require supply beyond that produced in China. Lastly, we illustrated revenue streams for different ore compositions in China in 2015.« less
Kobayashi, Yasuhiro; Manabe, Yuuji; Nakata, Norimasa; Kusaka, Satoshi
A business risk management method has been developed for a supply-chain without a storage function under demand uncertainty. Power supply players in the deregulated power market face the need to develop the best policies for power supply from self-production and reserved purchases to balance demand, which is predictable with error. The proposed method maximizes profit from the operation of the supply-chain under probabilistic demand uncertainty on the basis of a probabilistic programming approach. Piece-wise linear functions are employed to formulate the impact of under-booked or over-booked purchases on the supply cost, and constraints on over-demand probability are introduced to limit over-demand frequency on the basis of the demand probability distribution. The developed method has been experimentally applied to the supply policy of a power-supply-chain, the operation of which is based on a 3-stage pricing purchase contract and on 28 time zones. The characteristics of the obtained optimal supply policy are successfully captured in the numerical results, which suggest the applicability of the proposed method.
A perspective on the economics of space logistics in a future state where there are continuous supply routes between Earth and outlying bodies in the solar system is discussed. In particular, the dependence of the cost of transport on specific impulse and % of non-fuel mass as cargo is discussed. Also, a simple way to calculate the optimal cargo mass of a transport ship carrying a commodity with constant demand is proposed as well as qualitative issues regarding backhaul and inventory that space logistics planners will have to one day confront.
Kodym, Oldřich; Unucka, Jakub
Paper deals with complex system for processing information from means of transport acting as parts of train (rail or road). It focuses on automated information gathering using AutoID technology, information transmission via Internet of Things networks and information usage in information systems of logistic firms for support of selected processes on MES and ERP levels. Different kinds of gathered information from whole transport chain are discussed. Compliance with existing standards is mentioned. Security of information in full life cycle is integral part of presented system. Design of fully equipped system based on synthesized functional nodes is presented.
communication system , firms around the world have more capability to trade globally. Also, improvements and success in the practice of SCM have...delivery system were analyzed by comparing the results of each scenario. The results of this analysis show that small convoys in supply chains are more...five different scenarios, the effects of changes in the size of convoy and delivery system were analyzed by comparing the results of each scenario
Nicholas, P K; Mandolesi, S; Naspetti, S; Zanoli, R
The growth in organic and low-input farming practices is driven by both market demand for high quality, safe food, and European Union policy support, and these types of farming practices are considered in European Union policies for sustainable production, food quality, healthy life, and rural development. However, many constraints to the development of low-input and organic dairy farming supply chains have been identified, including economic, political, and technical constraints. In order for these types of supply chains to develop and provide further benefits to society, innovations are required to improve their sustainability. However, an innovation will only be taken up and result in desirable change if the whole supply chain accepts the innovation. In this paper, Q methodology is used to identify the acceptability of dairy supply chain innovations to low-input and organic supply chain members and consumers in Belgium, Finland, Italy, and the United Kingdom. A strong consensus existed across all respondents on innovations that were deemed as unacceptable. The use of genetically modified and transgenic organisms in the farming system and innovations perceived as conflicting with the naturalness of the production system and products were strongly rejected. Innovations that were strongly liked across all participants in the study were those related to improving animal welfare and improving forage quality to be able to reduce the need for purchased concentrate feeds. Only minor differences existed between countries as to where the priorities lay in terms of innovation acceptability.
Kwok, Jeremy Jie Ming; Lee, Dong-Yup
Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business.
Kwok, Jeremy Jie Ming; Lee, Dong-Yup
Previous researches for understanding supply chain relationship have mostly focused on its vertical collaboration between buyers and suppliers. However, there have been some instances of volatile and stable collaborative relationships amongst competitors such as Apple-Samsung product manufacturer-component supplier relationship and airline alliances, respectively, which is recognized as coopetition. Even though there have been several qualitative studies and a number of game theory models on coopetition, it is rare to find any attempts on quantitative characterization of such coopetitive dynamic behavior in supply chain relationship. Hence, in this work, we formulated a MINLP model mathematically representing coopetitive relationships in a cost efficient supply chain network. In particular, the coopetition factor was newly introduced to measure the degree of coopetition among supply chain players and determine the optimal level of coopetition to engage in. The utility and practicality of the model were strongly demonstrated using a case study of a hypothetical smartphone supply chain network under different scenarios, thus proposing their strategically viable optimal interactions. Therefore, this exploratory study can herald a new era of global coopetitive business. PMID:26186227
Tucker, David A.
Optimization of critical supply chains to deliver thousands of parts, materials, sub-assemblies, and vehicle structures as needed is vital to the success of the Constellation Program. Thorough analysis needs to be performed on the integrated supply chain processes to plan, source, make, deliver, and return critical items efficiently. Process modeling provides simulation technology-based, predictive solutions for supply chain problems which enable decision makers to reduce costs, accelerate cycle time and improve business performance. For example, United Space Alliance, LLC utilized this approach in late 2006 to build simulation models that recreated shuttle orbiter thruster failures and predicted the potential impact of thruster removals on logistics spare assets. The main objective was the early identification of possible problems in providing thruster spares for the remainder of the Shuttle Flight Manifest. After extensive analysis the model results were used to quantify potential problems and led to improvement actions in the supply chain. Similarly the proper modeling and analysis of Constellation parts, materials, operations, and information flows will help ensure the efficiency of the critical logistics supply chains and the overall success of the program.
Li, Jacqueline; Pan, Shu-Yuan; Kim, Hyunook; Linn, Jean H; Chiang, Pen-Chi
As suggested by UNEP, the key to sustainable development is to create a "green economy" which should encapsulate all three sectors: the industry, the people, and the government. Therefore, there is an urgent need to develop and implement the green technologies into the existing facilities, especially in the developing countries. In this study, the role of green supply chains in eco-industrial parks (EIPs) towards a green economy was investigated. The strategies and effective evaluation procedures of the green economy were proposed by assessing the barriers from the perspective of institution, regulation, technology, and finance. In addition, three case studies from iron and steel-making, paper mill and pulping, and petrochemical industries were presented and illustrated for building the green supply chains. For example, in the case of Lin-Hai Industrial Park, a total of 15 efficient green supply chains using waste-to-resources technologies were established by 2012, resulting in an economic benefit of USD 100 million per year. It suggests that the green supply chains should be established to achieve both economic growth and environmental protection. With these successful experiences, building a green supply chain within industrial park should be extensively promoted to make traditional industries around the world being environmentally bearable, economic viable, and social equitable.
Bedouch, P; Baudrant, M; Detavernier, M; Rey, C; Brudieu, E; Foroni, L; Allenet, B; Calop, J
Drug supply chain safety has become a priority for public health which implies a collective process. This process associates all health professionals including the pharmacist who plays a major role. The objective of this present paper is to describe the several approaches proven effective in the reduction of drug-related problem in hospital, illustrated by the Grenoble University Hospital experience. The pharmacist gets involved first in the general strategy of hospital drug supply chain, second by his direct implication in clinical activities. The general strategy of drug supply chain combines risk management, coordination of the Pharmacy and Therapeutics Committee, selection and purchase of drugs and organisation of drug supply chain. Computer management of drug supply chain is a major evolution. Nominative drug delivering has to be a prior objective and its implementation modalities have to be defined: centralized or decentralized in wards, manual or automated. Also, new technologies allow the automation of overall drug distribution from central pharmacy and the implementation of automated drug dispensing systems into wards. The development of centralised drug preparation allows a safe compounding of high risk drugs, like cytotoxic drugs. The pharmacist should develop his clinical activities with patients and other health care professionals in order to optimise clinical decisions (medication review, drug order analysis) and patients follow-up (therapeutic monitoring, patient education, discharge consultation).
Mills, Jack; Prince, Heath
Skill supply chains apply a chain strategy to human resources to make the labor market more efficient. They link the multiple skill levels in a given labor market within a network of recruitment pathways for employers and advancement pathways for workers. Skill supply chains are based on employers' actual skill needs and on the principle that…
Hosseini, Seyed Ali; Shah, Nilay
There is a large body of literature regarding the choice and optimization of different processes for converting feedstock to bioethanol and bio-commodities; moreover, there has been some reasonable technological development in bioconversion methods over the past decade. However, the eventual cost and other important metrics relating to sustainability of biofuel production will be determined not only by the performance of the conversion process, but also by the performance of the entire supply chain from feedstock production to consumption. Moreover, in order to ensure world-class biorefinery performance, both the network and the individual components must be designed appropriately, and allocation of resources over the resulting infrastructure must effectively be performed. The goal of this work is to describe the key challenges in bioenergy supply chain modelling and then to develop a framework and methodology to show how multi-scale modelling can pave the way to answer holistic supply chain questions, such as the prospects for second generation bioenergy crops.
Li, Maozhong; Du, Yunai; Wang, Qiyue; Sun, Chunmeng; Ling, Xiang; Yu, Boyang; Tu, Jiasheng; Xiong, Yerong
As the essential components in formulations, pharmaceutical excipients directly affect the safety, efficacy, and stability of drugs. Recently, safety incidents of pharmaceutical excipients posing seriously threats to the patients highlight the necessity of controlling the potential risks. Hence, it is indispensable for the industry to establish an effective risk assessment system of supply chain. In this study, an AHP-fuzzy comprehensive evaluation model was developed based on the analytic hierarchy process and fuzzy mathematical theory, which quantitatively assessed the risks of supply chain. Taking polysorbate 80 as the example for model analysis, it was concluded that polysorbate 80 for injection use is a high-risk ingredient in the supply chain compared to that for oral use to achieve safety application in clinic, thus measures should be taken to control and minimize those risks.
Li, Maozhong; Du, Yunai; Wang, Qiyue; Sun, Chunmeng; Ling, Xiang; Yu, Boyang; Tu, Jiasheng; Xiong, Yerong
As the essential components in formulations, pharmaceutical excipients directly affect the safety, efficacy, and stability of drugs. Recently, safety incidents of pharmaceutical excipients posing seriously threats to the patients highlight the necessity of controlling the potential risks. Hence, it is indispensable for the industry to establish an effective risk assessment system of supply chain. In this study, an AHP-fuzzy comprehensive evaluation model was developed based on the analytic hierarchy process and fuzzy mathematical theory, which quantitatively assessed the risks of supply chain. Taking polysorbate 80 as the example for model analysis, it was concluded that polysorbate 80 for injection use is a high-risk ingredient in the supply chain compared to that for oral use to achieve safety application in clinic, thus measures should be taken to control and minimize those risks.
Zhang, Yanan; Hu, Guiping; Brown, Robert C
This study investigates the optimal supply chain design for commodity chemicals (BTX, etc.) production via woody biomass fast pyrolysis and hydroprocessing pathway. The locations and capacities of distributed preprocessing hubs and integrated biorefinery facilities are optimized with a mixed integer linear programming model. In this integrated supply chain system, decisions on the biomass chipping methods (roadside chipping vs. facility chipping) are also explored. The economic objective of the supply chain model is to maximize the profit for a 20-year chemicals production system. In addition to the economic objective, the model also incorporates an environmental objective of minimizing life cycle greenhouse gas emissions, analyzing the trade-off between the economic and environmental considerations. The capital cost, operating cost, and revenues for the biorefinery facilities are based on techno-economic analysis, and the proposed approach is illustrated through a case study of Minnesota, with Minneapolis-St. Paul serving as the chemicals distribution hub.
Schlegel, G L
The objective of this paper is to profile a practitioner's perspective on supply chain optimization and highlight the critical elements of this potential new logistics breakthrough idea. The introduction will briefly describe the existing distribution network, and business environment. This will include operational statistics, manufacturing software, and hardware configurations. The first segment will cover the critical success factors or foundations elements that are prerequisites for success. The second segment will give you a glimpse of a "working game plan" for successful migration to supply chain optimization. The final segment will briefly profile "bottom-line" benefits to be derived from the use of supply chain optimization as a strategy, tactical tool, and competitive advantage.
This research is part of a large scale comprehensive mathematical and empirical modeling investigation projects aimed at developing a better understanding of supply-chain risk management by offering a comprehensive framework including theoretical elements and empirical evidence based on managers' perception of improved organizational level of preparedness to safeguard against the threats of disruptions, delays and stoppage in the supply chain. More specifically, this paper reports the empirical investigation conducted using 92 companies in several eastern USA regions involved in international trades with global supply chains. Among the 56 general hypotheses investigated, the results support that managers strive to balance their control and decision impacts to mold their responses to risk factors with knowledge of the extent of cost consequences as stated in previous research. However, the results also propose new findings which significantly vary from previous research reports.
Yılmaz Balaman, Şebnem; Selim, Hasan
The core driver of this study is to deal with the design of anaerobic digestion based biomass to energy supply chains in a cost effective manner. In this concern, a decision model is developed. The model is based on fuzzy multi objective decision making in order to simultaneously optimize multiple economic objectives and tackle the inherent uncertainties in the parameters and decision makers' aspiration levels for the goals. The viability of the decision model is explored with computational experiments on a real-world biomass to energy supply chain and further analyses are performed to observe the effects of different conditions. To this aim, scenario analyses are conducted to investigate the effects of energy crop utilization and operational costs on supply chain structure and performance measures.
Sun, Amy Cha-Tien; Downes, Paula Sue; Blair, Angela S.; Welk, Margaret Ellen
Chlorinated hydrocarbons represent the precursors for products ranging from PVC and refrigerants to pharmaceuticals. Natural or manmade disruptions that affect the availability of these products nationally have the potential to affect a wide range of markets, from healthcare to construction. Sandia National Laboratories (Sandia) has developed datasets and models that allow the analysis of the interdependencies within the chlorine chemical supply chain and consequences of disruptions. Combining data on plant locations, transportation, utilities, and the chemical supply chain itself, with modeling tools such as N-ABLE, a Sandia-developed agent based modeling system, allows Sandia to model this complex system dynamically. Sandia has used the N-ABLE technology to simulate a disruption to the chlorinated hydrocarbon supply chain caused by a hurricane striking the Louisiana coast. This paper presents results and conclusions from this analysis.
Flores, Myrna; Mendoza, Ana; Lavin, Victor; Flores, Benito
Supply Chain Management can be briefly defined as the orchestration of a network of entities such as suppliers, distributors and clients to achieve a common goal: delivering cost efficient products and services exceeding customers’ expectations. Therefore, firms should consider all those End-to-End processes enabling an efficient integration and interoperability of partners collaborating in such Supply Chain when designing their Business Process Architecture (BPA). One key enabler to accomplish this goal is the identification, documentation and sharing of best practices. This paper describes the outcomes of a collaborative project carried out by CEMEX Research Group and the Universidad de Monterrey (UDEM), which focused on developing taxonomy to document best practices for the supply chain management together with a generic model to evaluate their level of implementation.
Bahri, Mehrab; Tarokh, Mohammad Jafar
Supply chain is an accepted way of remaining in the competition in today's rapidly changing market. This paper presents a coordinated seller-buyer supply chain model in two stages, which is called Joint Economic Lot Sizing (JELS) in literature. The delivery activities in the supply chain consist of a single raw material. We assume that the delivery lead time is stochastic and follows an exponential distribution. Also, the shortage during the lead time is permitted and completely back-ordered for the buyer. With these assumptions, the annual cost function of JELS is minimized. At the end, a numerical example is presented to show that the integrated approach considerably improves the costs in comparison with the independent decisions by seller and buyer.
Wee, SY; Thoo, AC; Z, Sulaiman; FM, Muharam
For the decades, organizations have endeavored to look for external sources for opportunities to achieve efficient and responsive supply chain with their partners especially for small and medium manufacturers (SMM). In this scenario, supply chain collaboration (SCC) is an interaction between supply chain members with the purpose of utilizes the knowledge and resources of customers and suppliers, and integrates the flows of products and information in order to achieve a common goal and obtain mutual benefit. The essential SCC dimensions for SMMs comprised of information sharing, joint knowledge creation, joint decision making, goal congruence and incentive sharing. The successful implementation of SCC can give SMMs an edge over their competitors. This paper aims to introduce a review of SCC practices for SMM. Overall, the findings provide managerial insights for the SMM in SCC implementation owing to resource scarcity and the need to draw SCC in order to ensure a sustainable competitive advantage.
Miao, Shidi; Wang, Tengfei; Chen, Deyun
With the rapid development of the electronic information industry in recent years, electronic products are being updated faster and faster, and e-waste recycling has become a common problem around the world. Firstly, this article contrasts recycling at home and abroad using the predicament of Midea Corp. Based on a closed-loop supply chain with the system dynamics method, a model is constructed and simulated. In this model, the collection point coverage rate is introduced to adjust the e-waste recycling rate dynamically. Aiming at a recycling mode dominated by the third party of the closed-loop supply chain, the article mainly discusses the impact on the sales rate and market share of the recycling model by third-party enterprises and compares the total revenue of all supply chains. Simulation results show that the model is more effective and optimal than the traditional recycling model.
Li, Liying; Wang, Yong; Yan, Xiaoming
This paper investigates pricing and ordering as well as advertising coordination issues in a single-manufacturer single-retailer supply chain, where the manufacturer sells a newsvendor-type product through the retailer who faces a stochastic demand depending on both retail price and advertising expenditure. Under the assumption that the market demand has a multiplicative functional form, the Stackelberg and cooperative game models are developed, and the closed form solution to each model is provided as well. Comparisons and insights are presented. We show that a properly designed revenue-cost-sharing contract can achieve supply chain coordination and lead to a Pareto improving win-win situation for channel members. We also discuss the allocation of the extra joint profit according to individual supply chain members' risk preferences and negotiating powers.
Pacific Northwest National Laboratory (PNNL) has engaged industry to “go beyond compliance” for over a decade in controlling and securing their supply chains to ensure their goods are not diverted to nuclear weapons programs. This work has focused on dual-use industries that manufacture products that can be used in both commercial applications and in the development of a nuclear weapon. The team encourages industry to self-regulate to reduce proliferation risks. As part of that work, PNNL interviewed numerous companies about their compliance practices to understand their business and to build awareness around best practices to ensure security of goods, technology, and information along their supply chains. From conducting this work, PNNL identified indicators that a company can adopt as part of its commitment to nonproliferation ideals with a focus on supply chain security.
Li, Liying; Wang, Yong; Yan, Xiaoming
This paper investigates pricing and ordering as well as advertising coordination issues in a single-manufacturer single-retailer supply chain, where the manufacturer sells a newsvendor-type product through the retailer who faces a stochastic demand depending on both retail price and advertising expenditure. Under the assumption that the market demand has a multiplicative functional form, the Stackelberg and cooperative game models are developed, and the closed form solution to each model is provided as well. Comparisons and insights are presented. We show that a properly designed revenue-cost-sharing contract can achieve supply chain coordination and lead to a Pareto improving win-win situation for channel members. We also discuss the allocation of the extra joint profit according to individual supply chain members' risk preferences and negotiating powers. PMID:24453832
We explore the impact of channel structure on the manufacturer, the distributer, the retailer and the entire supply chain by considering three different channel structures in radiance of with and without coordination. These structures include a traditional retail channel and two manufacturer direct channels with and without consistent pricing. By comparing the performance of the manufacturer, the distributer and the retailer, and the entire supply chain in three different supply chain structures, it is established analytically that, under some conditions, a dual channel can outperform a single retail channel; as a consequence, a coordination mechanism is developed that not only coordinates the dual channel but also outperforms the non-cooperative single retail channel. All the analytical results are further analysed through numerical examples.
can be tailored to leverage the iterative nature of Agile meth- ods. Using optional contract funding lines or indefinite delivery indefinite quantity... naturally created during the execution of the Agile implementation. In the following paragraphs, we identify issues to consider in building an Agile...employing Agile methods [Hartman 2006]. Be prepared to mine and effectively use the metrics data that naturally occur in typical Ag- ile teams. In
Infante, Maria; dos Santos, Maria Angélica Borges
Despite their importance for hospital operations, discussions of healthcare organization logistics and supply and materials management are notably lacking in Brazilian literature. This paper describes a methodology for organizing the supply of medical materials in public hospitals, based on an action-research approach. Interventions were based on the assumption that a significant portion of problems in Brazil's National Health System (SUS) facilities derive from the fact that their clinical and administrative departments do not see themselves as belonging to the same production chain - neither the hospital nor the supply department is aware of what the other produces. The development of the methodology and its main steps are presented and discussed, against a background of recent literature and total quality and supply chain management concepts.
management strategy into other government organizations (and their suppliers) and the country’s wider Critical Infrastructure Protection initiatives... Infrastructure Protection DHS SCRM DHS Software Assurance Joe Jarzombek − email@example.com ISO Standards and Harmonization CS1 ICT SCRM Ad hoc...Allen Hamilton Abstract. Information and Communication Technology ( ICT ) Supply Chain Risk Management (SCRM) seeks to manage and mitigate cyber and supply
Omar, Marina; Mustaffa, Noorfa Haszlinna H.; Othman, Siti Norsyahida
Supply Chain Management (SCM) is an important activity in all producing facilities and in many organizations to enable vendors, manufacturers and suppliers to interact gainfully and plan optimally their flow of goods and services. A simulation optimization approach has been widely used in research nowadays on finding the best solution for decision-making process in Supply Chain Management (SCM) that generally faced a complexity with large sources of uncertainty and various decision factors. Metahueristic method is the most popular simulation optimization approach. However, very few researches have applied this approach in optimizing the simulation model for supply chains. Thus, this paper interested in evaluating the performance of metahueristic method for stochastic supply chains in determining the best flexible inventory replenishment parameters that minimize the total operating cost. The simulation optimization model is proposed based on the Bees algorithm (BA) which has been widely applied in engineering application such as training neural networks for pattern recognition. BA is a new member of meta-heuristics. BA tries to model natural behavior of honey bees in food foraging. Honey bees use several mechanisms like waggle dance to optimally locate food sources and to search new ones. This makes them a good candidate for developing new algorithms for solving optimization problems. This model considers an outbound centralised distribution system consisting of one supplier and 3 identical retailers and is assumed to be independent and identically distributed with unlimited supply capacity at supplier.
Chung, Donald; Elgqvist, Emma; Santhanagopalan, Shriram
Manufacturing capacity for lithium-ion batteries (LIBs) — which power many consumer electronics and are increasingly used to power electric vehicles — is heavily concentrated in East Asia. To illuminate the factors that drive regional competitiveness in automotive LIB cell production, this study models cell manufacturing cost and minimum sustainable price, and examines development of LIB supply chains and current LIB market conditions. The study shows that factors driving the cost competitiveness of LIB manufacturing locations are mostly built—supply chain developments and competition, access to materials, and production expertise. Some regional costs — including cost of capital, labor, and materials — are significant and should be considered.
Huizhong, Dong; Hongli, Song
An evolutionary game model of Reverse Supply Chain(RSC) is established based on duplication dynamics function and evolutionary stable strategy. Using the model framework, this paper provides insights into a deeper understanding on how each supplier make strategic decision independently in reverse supply chain to determine their performance. The main conclusion is as follow: Under the market mechanism, not unless the extra income derived from the implementation of RSC exceeds zero point would the suppliers implement RSC strategy. When those suppliers are passive to RSC, the effective solution is that the government takes macro-control measures, for example, to force those suppliers implement RSC through punishment mechanism.
Pochampally, Kishore K.; Gupta, Surendra M.
The growing desire of consumers to acquire the latest technology (both at home and in the workplace), along with the rapid technological development of new products, has led to a new environmental problem: waste. The only way to tackle this problem is design and implementation of reverse supply chains. Implementation of an efficient reverse supply chain requires coordination among a number of parties, such as the collector, the dismantler, the shredder, and the recycler. In this paper, we identify four different scenarios of homogeneous and heterogeneous products, and formulate some potential interactions between the collector and the dismantler, for each of those scenarios.
The growth of contingent work (also known as precarious employment), the informal sector, and business practices that diffuse employer responsibility for worker health and safety (such as outsourcing and the development of extended national and international contracting networks [supply chains]) pose a serious threat to occupational health and safety that disproportionately affects low-wage, ethnic minority, and immigrant workers. Drawing on cases from the United States and Australia, we examine the role that community-based campaigns can play in meeting these challenges, including several successful campaigns that incorporate supply chain regulation. PMID:19890154
Fobair, Richard C., II
This research presents a model for forecasting the numbers of jobs created in the energy efficiency retrofit (EER) supply chain resulting from an investment in upgrading residential buildings in Florida. This investigation examined material supply chains stretching from mining to project installation for three product types: insulation, windows/doors, and heating, ventilating, and air conditioning (HVAC) systems. Outputs from the model are provided for the project, sales, manufacturing, and mining level. The model utilizes reverse-estimation to forecast the numbers of jobs that result from an investment. Reverse-estimation is a process that deconstructs a total investment into its constituent parts. In this research, an investment is deconstructed into profit, overhead, and hard costs for each level of the supply chain and over multiple iterations of inter-industry exchanges. The model processes an investment amount, the type of work and method of contracting into a prediction of the number of jobs created. The deconstruction process utilizes data from the U.S. Economic Census. At each supply chain level, the cost of labor is reconfigured into full-time equivalent (FTE) jobs (i.e. equivalent to 40 hours per week for 52 weeks) utilizing loaded labor rates and a typical employee mix. The model is sensitive to adjustable variables, such as percentage of work performed per type of product, allocation of worker time per skill level, annual hours for FTE calculations, wage rate, and benefits. This research provides several new insights into job creation. First, it provides definitions that can be used for future research on jobs in supply chains related to energy efficiency. Second, it provides a methodology for future investigators to calculate jobs in a supply chain resulting from an investment in energy efficiency upgrades to a building. The methodology used in this research is unique because it examines gross employment at the sub-industry level for specific
Tanimizu, Yoshitaka; Harada, Kana; Ozawa, Chisato; Iwamura, Koji; Sugimura, Nobuhiro
This research proposes a two-layered model for dynamic supply chain management considering transportation constraint. The model provides a method for suppliers to estimate suitable prices and delivery times of products based on not only production schedules but also transportation plans in consideration of constraints about shipping times and loading capacities for transportation. A prototype of dynamic supply chain simulation system was developed and some computational experiments were carried out in order to verify the effectiveness of the model. The prototype system is available to determine suitable shipping times and loading capacities of transportation vehicles.
Allah Taleizadeh, Ata; Noori-daryan, Mahsa
We studied a decentralised three-layer supply chain including a supplier, a producer and some retailers. All the retailers order their demands to the producer and the producer order his demands to the supplier. We assumed that the demand is price sensitive and shortage is not permitted. The goal of the paper is to optimise the total cost of the supply chain network by coordinating decision-making policy using Stackelberg-Nash equilibrium. The decision variables of our model are the supplier's price, the producer's price and the number of shipments received by the supplier and producer, respectively. To illustrate the applicability of the proposed model numerical examples are presented.
Ren, Jingzheng; Dong, Liang; Sun, Lu; Goodsite, Michael Evan; Tan, Shiyu; Dong, Lichun
The aim of this work was to develop a model for optimizing the life cycle cost of biofuel supply chain under uncertainties. Multiple agriculture zones, multiple transportation modes for the transport of grain and biofuel, multiple biofuel plants, and multiple market centers were considered in this model, and the price of the resources, the yield of grain and the market demands were regarded as interval numbers instead of constants. An interval linear programming was developed, and a method for solving interval linear programming was presented. An illustrative case was studied by the proposed model, and the results showed that the proposed model is feasible for designing biofuel supply chain under uncertainties.
Carpenter, Alberta; Mann, Margaret; Gelman, Rachel; Lewis, John; Benson, David; Cresko, Joe; Ma, Seungwook
In evaluating next-generation materials and processes, the supply chain can have a large impact on the life cycle energy impacts. The Materials Flow through Industry (MFI) tool was developed for the Department of Energy's Advanced Manufacturing Office to be able to evaluate the energy impacts of the U.S. supply chain. The tool allows users to perform process comparisons, material substitutions, and grid modifications, and to see the effects of implementing sector efficiency potentials (Masanet, et al. 2009). This paper reviews the methodology of the tool and provides results around specific scenarios.
James, T.; Goodrich, A.
This briefing provides an overview of supply chain developments in the global wind industry and a detailed assessment of blade manufacturing considerations for U.S. end-markets. The report discusses the international trade flows of wind power equipment, blade manufacturing and logistical costs, and qualitative issues that often influence factory location decisions. To help guide policy and research and development strategy decisions, this report offers a comprehensive perspective of both quantitative and qualitative factors that affect selected supply chain developments in the growing wind power industry.
Ruble, James H
Recent administrative actions taken by the Drug Enforcement Administration (DEA) in Florida have prompted an articulate and detailed discussion of the pharmaceutical supply chain for controlled substances. Current practices in commercial distribution systems may have a partial nexus to the proliferation of opioid prescription drug abuse in Florida. No single factor or entity is responsible for this abuse proliferation, and there is no intent to harm consumers; however, distribution practices are adding risk to public health. This commentary extends a discussion on supply chain practices that seem misaligned in the promotion of legitimate business objectives and advancing public health.
Karimi Movahed, Kamran; Zhang, Zhi-Hai
Demand and lead time uncertainties have significant effects on supply chain behaviour. In this paper, we present a single-product three-level multi-period supply chain with uncertain demands and lead times by using robust techniques to study the managerial insights of the supply chain inventory system under uncertainty. We formulate this problem as a robust mixed-integer linear program with minimised expected cost and total cost variation to determine the optimal (s, S) values of the inventory parameters. Several numerical studies are performed to investigate the supply chain behaviour. Useful guidelines for the design of a robust supply chain are also provided. Results show that the order variance and the expected cost in a supply chain significantly increase when the manufacturer's review period is an integer ratio of the distributor's and the retailer's review periods.
Shittu, Ekundayo; Harnly, Melissa; Whitaker, Shanta; Miller, Roger
One of the major problems facing Nigeria's vaccine supply chain is the lack of adequate vaccine storage facilities. Despite the introduction of solar-powered refrigerators and the use of new tools to monitor supply levels, this problem persists. Using data on vaccine supply for 2011-14 from Nigeria's National Primary Health Care Development Agency, we created a simulation model to explore the effects of variance in supply and demand on storage capacity requirements. We focused on the segment of the supply chain that moves vaccines inside Nigeria. Our findings suggest that 55 percent more vaccine storage capacity is needed than is currently available. We found that reorganizing the supply chain as proposed by the National Primary Health Care Development Agency could reduce that need to 30 percent more storage. Storage requirements varied by region of the country and vaccine type. The Nigerian government may want to consider the differences in storage requirements by region and vaccine type in its proposed reorganization efforts.
Military operations in Iraq and Afghanistan have focused attention on the performance of the Department of Defense’s (DOD) supply chain management...According to DOD, it spent approximately $178 billion on its supply chain in fiscal year 2007. As a result of weaknesses in DOD’s management of its... supply chain , this area has been on GAO’s list of high-risk federal government programs since 1990. DOD released its Logistics Roadmap in July 2008 to
Managing the Services Supply Chain in the Department of Defense: Empirical Study of the Current Management Practices in the Army 21 September...Managing the Services Supply Chain in the Department of Defense: Empirical Study of the Current Management Practices in the Army 5a. CONTRACT NUMBER 5b...Service Supply Chain , Services Acquisition, Service Lifecycle, Contract Management, Project Management, Program Management = = ^Åèìáëáíáçå=oÉëÉ~êÅÜ
Blanke, Michael M
Excessive waste along the food supply chain of 71 (UK, Netherlands) to 82 (Germany) kg per head per year sparked widespread criticism of the agricultural food business and provides a great challenge and task for all its players and stakeholders. Origins of this food waste include private households, restaurants and canteens, as well as supermarkets, and indicate that 59-65% of this food waste can be avoided. Since ∼50% of the food waste is fruit and vegetables, monitoring and control of their natural ripening gas - ethylene - is suggested here as one possible key to reducing food waste. Ethylene accelerates ripening of climacteric fruits, and accumulation of ethylene in the supply chain can lead to fruit decay and waste. While ethylene was determined using a stationary gas chromatograph with gas cylinders, the new generation of portable sensor-based instruments now enables continuous in situ determination of ethylene along the food chain, a prerequisite to managing and maintaining the quality and ripeness of fruits and identifying hot spots of ethylene accumulation along the supply chain. Ethylene levels were measured in a first trial, along the supply chain of apple fruit from harvest to the consumer, and ranged from 10 ppb in the CA fruit store with an ethylene scrubber, 70 ppb in the fruit bin, to 500 ppb on the sorting belt in the grading facility, to ppm levels in perforated plastic bags of apples. This paper also takes into account exogenous ethylene originating from sources other than the fruit itself. Countermeasures are discussed, such as the potential of breeding for low-ethylene fruit, applications of ethylene inhibitors (e.g. 1-MCP) and absorber strips (e.g. 'It's Fresh', Ryan'), packages (e.g. 'Peakfresh'), both at the wholesale and retail level, vents and cooling for the supply chain, sale of class II produce ('Wunderlinge'), collection (rather than waste) of produce on the 'sell by' date ('Die Tafel') and whole crop purchase (WCP) to aid reducing
This paper proposes a matrix structure for training Supply Chain Management (SCM) professionals. It is an innovative programme structure that combines two approaches: cross-border and inter-organisational. It enables the students to comprehend complex and specific business environments and to understand the diverse nature of SCM systems in both…
Drake, Matthew J.; Luchs, Ryan J.; Mawhinney, John R.
Short-term study-abroad programs are gaining in popularity at business schools around the United States. We discuss the innovative 4-week program we have developed at Duquesne University where we offer two three-credit, required business core courses. In particular, we focus on the structure of a 2-week core supply chain management course. By…
Over the past decades, network technologies across supply chains have been introduced and promoted with the premised benefits for all participants. However industry experience with an adoption process of some technology suggests that some firms have a great amount of uncertainty in estimating the benefits of its adoption. This uncertainty will…
The present work proposes a computer-aided methodology for designing sustainable supply chains in terms of sustainability metrics by utilizing the P-graph framework. The methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the U.S...
This project supported upgrades for manufacturing companies in the oil and natural gas supply chain in Oklahoma. The goal is to provide assistance that will lead to the improved efficiency advancement of the manufacturing processes currently used by the existing manufacturing clients. The basis for the work is to improve the economic environment for the clients and the communities they serve.
Gammelgaard, Britta; Mathiasen, John Bang
Globalisation and competition have impacted on not only large firms but also Small and Medium sizes Enterprises (SME) and these enterprises often act as subcontractors to larger firms operating in international markets. The impact of globalisation is severe on the SME-subcontractors due to supply chain linkages between large and SMEs through…
... Agricultural Marketing Service Web Based Supply Chain Management Commodity Offer Form, Paperwork Collection... revision to the information collection request is required for the implementation of a new system named Web....firstname.lastname@example.org . Fax: (202) 720-2782. Mail: David Tuckwiller, Project Manager, Web Based...
Japan on 11 March 2011 , and Iceland volcanic eruption of 27 May 2011. This research will focus on the Supply Chain Resilience Assessment and Management...requirements Product variabil ity reduction, Failure prevention Visibility Knowledge of the status of operating Business intelligence, Information
WASHINGTON - On March 22-23, U.S. Environmental Protection Agency Administrator Gina McCarthy welcomes public and private sector representatives from G7 nations to a workshop on sustainable supply chain management. At their annual Summit in 2015, th
Rosado Feger, Ana L.
Supply Chain Management, the coordination of upstream and downstream flows of product, services, finances, and information from a source to a customer, has risen in prominence over the past fifteen years. The delivery of a product to the consumer is a complex process requiring action from several independent entities. An individual firm consists…
González-Torre, Pilar L.; Adenso-Díaz, B.; Moreno, Plácido
The Cider Game is a simulator for a supply chain-related learning environment. Its main feature is that it provides support to students in the constructivist discovery process when learning how to make logistics decisions, at the same time as noting the occurrence of the bullwhip phenomenon. This learning environment seeks a balance between direct…
Data-driven decisions have become an important aspect of supply chain management. Demand planners are tasked with analyzing volumes of data that are being collected at a torrential pace from myriad sources in order to translate them into actionable business intelligence. In particular, demand volatilities and planning are vital for effective and…
Nitrogen pollution and negative impacts on human and environmental health are embodied in crop commodities traded domestically and internationally. Food supply chain companies can play a catalytic role in reducing that burden by helping to decrease the environmental nitrogen load from agriculture. T...
Long, Suzanna; Moos, J. Chris; Radic, Anne Bartel
The authors examined the skills achieved through a multicultural, virtual student project environment among 3 supply chain management courses. The partnership included 2 universities in the United States and 1 in France and created virtual teams of students across university lines and is presented as a case study. The case includes detailed…
Cargille, Brian; Branvold, Dwight
Explains how Hewlett-Packard creates supply chain management innovations and effectively diffuses new technologies. Outlines how performance technologists help accelerate the diffusion and adoption of innovations by modifying innovations, define the client adoption path, create resources to lead clients through adoption, and improve the diffusion…
Sarkar, Sourish; Kumar, Sanjay
This article describes a classroom tool to teach the impact of supply chain disruptions and mitigation strategies based on information sharing and collaboration. The tool is an adaptation of the Beer Distribution Game, is easy to play, and can be hosted online or on local servers. The game considers several scenarios based on the location of the…
ABOUT THE WORKSHOP The Workshop on the Design of Sustainable Product Systems and Supply Chains was held September 12–13, 2011 at the U.S. National Science Foundation (NSF) offices in Arlington, Virginia. The Workshop was co-sponsored by the U.S. Environmental Protection Agency (...
Duan, Yanqing; Bentley, Yongmei; Fu, Zetian; Zografos, Konstantinos; Bemeleit, Boris
This paper reports research findings from a project funded by the European Commission. The research used case studies and surveys to identify gaps between Europe and China in the level of Internet adoption in fresh-produce supply chains. The project reveals barriers to Internet adoption in China in this industry, and employs a transnational…
Dhumal, Parag; Sundararaghavan, P. S.; Nandkeolyar, Udayan
In this article we present a game that can be used as a tool to educate students and managers on the issues in supply chain (SC), inventory management. The game has a bilevel demand with one level during regular times and another during sale times. The game could be played in two modes (independence and cooperation) and has been field tested in…
Harnowo, Akhadian S.; Calhoun, Mikelle A.; Monteiro, Heather
Studies show that supply chain integration (SCI) is important to organizations. This article describes an activity that places students in the middle of an SCI scenario. The highly interactive hands-on simulation requires only 50 to 60 minutes of classroom time, may be used with 18 to about 36 students, and involves minimal instructor preparation.…
(10/19/2015 -- ATLANTA ) -- The U.S. Environmental Protection Agency (EPA) is honoring Nashville, Tennessee-based Western Express, Inc., with its annual SmartWayÂ® Excellence Awards as an industry leader in supply chain environmental and energy eff
WASHINGTON - U.S. Environmental Protection Agency is honoring 40 truck carriers and, for the first time ever, a barge carrier, as industry leaders in supply chain environmental and energy efficiency with its annual SmartWayÂ® Excellence Awards tod
Comm, Clare L.; Mathaisel, Dennis F. X.
Purpose: The costs in higher education are increasing and need to be controlled. This paper aims to demonstrate what lessons higher education could learn from Wal-Mart's reasons for its financial success with its focus on efficient and effective supply chain management (SCM) best practices. Design/methodology/approach: Wal-Mart's best practices in…
Gonzalez, Marvin E.; Quesada, Gioconda; Gourdin, Kent; Hartley, Mark
Purpose: The purpose of this paper is to utilize quality function deployment (QFD), Benchmarking analyses and other innovative quality tools to develop a new customer-centered undergraduate curriculum in supply chain management (SCM). Design/methodology/approach: The researchers used potential employers as the source for data collection. Then,…
Service-learning (SL) is a pedagogical approach in which students are assigned a course-related project in a not-for-profit organization, and are tasked to apply course content to execute the project. While the benefits are multifarious, only recently have supply chain management (SCM) courses adapted this innovative teaching methodology. The…
This document provides U.S. EPA’s perspectives on the discussions at the G7 Alliance on Resource Efficiency U.S.-hosted Workshop on the Use of Life Cycle Concepts in Supply Chain Management to Achieve Resource Efficiency that was held March 22-23, 2016.
Ju, Munsol; Osako, Masahiro; Harashina, Sachihiko
The food loss rate is a factor that represents food consumption efficiency. To improve food consumption efficiency, we need to fundamentally quantify food loss at national and global levels. This study examines food and food waste flow and calculates the food loss rate in the food supply chain by targeting Japan. We analyzed inedible food waste and avoidable food losses in wholesale, manufacturing, retail, food services, and households and considered different supply chain pathways, different food categories representing whole Japanese meals, and weight changes after cooking. The results are as follows: (1) Japan has an overall rate of avoidable food losses of approximately 15% for meals (excluding agricultural losses), (2) the supply sector with the highest food loss rate is food services, and (3) the food category with the highest food loss rate is vegetables. Finally, we proposed a model for calculating food loss rates that could be used for future analysis in Japan or other countries.
Osorio, Andres F; Brailsford, Sally C; Smith, Honora K; Forero-Matiz, Sonia P; Camacho-Rodríguez, Bernardo A
Production planning in the blood supply chain is a challenging task. Many complex factors such as uncertain supply and demand, blood group proportions, shelf life constraints and different collection and production methods have to be taken into account, and thus advanced methodologies are required for decision making. This paper presents an integrated simulation-optimization model to support both strategic and operational decisions in production planning. Discrete-event simulation is used to represent the flows through the supply chain, incorporating collection, production, storing and distribution. On the other hand, an integer linear optimization model running over a rolling planning horizon is used to support daily decisions, such as the required number of donors, collection methods and production planning. This approach is evaluated using real data from a blood center in Colombia. The results show that, using the proposed model, key indicators such as shortages, outdated units, donors required and cost are improved.
Castillo-Villar, Krystel; Minor-Popocatl, Hertwin; Webb, Erin
Logging residues, which refer to the unused portions of trees cut during logging, are important sources of biomass for the emerging biofuel industry and are critical feedstocks for the first-type biofuel facilities (e.g., corn-ethanol facilities). Logging residues are under-utilized sources of biomass for energetic purposes. To support the scaling-up of the bioenergy industry, it is essential to design cost-effective biofuel supply chains that not only minimize costs, but also consider the biomass quality characteristics. The biomass quality is heavily dependent upon the moisture and the ash contents. Ignoring the biomass quality characteristics and its intrinsic costs may yield substantial economic losses that will only be discovered after operations at a biorefinery have begun. Here this paper proposes a novel bioenergy supply chain network design model that minimizes operational costs and includes the biomass quality-related costs. The proposed model is unique in the sense that it supports decisions where quality is not unrealistically assumed to be perfect. The effectiveness of the proposed methodology is proven by assessing a case study in the state of Tennessee, USA. The results demonstrate that the ash and moisture contents of logging residues affect the performance of the supply chain (in monetary terms). Higher-than-target moisture and ash contents incur in additional quality-related costs. The quality-related costs in the optimal solution (with final ash content of 1% and final moisture of 50%) account for 27% of overall supply chain cost. In conclusion, based on the numeral experimentation, the total supply chain cost increased 7%, on average, for each additional percent in the final ash content.
Castillo-Villar, Krystel; Minor-Popocatl, Hertwin; Webb, Erin
Logging residues, which refer to the unused portions of trees cut during logging, are important sources of biomass for the emerging biofuel industry and are critical feedstocks for the first-type biofuel facilities (e.g., corn-ethanol facilities). Logging residues are under-utilized sources of biomass for energetic purposes. To support the scaling-up of the bioenergy industry, it is essential to design cost-effective biofuel supply chains that not only minimize costs, but also consider the biomass quality characteristics. The biomass quality is heavily dependent upon the moisture and the ash contents. Ignoring the biomass quality characteristics and its intrinsic costs may yield substantial economicmore » losses that will only be discovered after operations at a biorefinery have begun. Here this paper proposes a novel bioenergy supply chain network design model that minimizes operational costs and includes the biomass quality-related costs. The proposed model is unique in the sense that it supports decisions where quality is not unrealistically assumed to be perfect. The effectiveness of the proposed methodology is proven by assessing a case study in the state of Tennessee, USA. The results demonstrate that the ash and moisture contents of logging residues affect the performance of the supply chain (in monetary terms). Higher-than-target moisture and ash contents incur in additional quality-related costs. The quality-related costs in the optimal solution (with final ash content of 1% and final moisture of 50%) account for 27% of overall supply chain cost. In conclusion, based on the numeral experimentation, the total supply chain cost increased 7%, on average, for each additional percent in the final ash content.« less
von der Assen, Niklas; Sternberg, André; Kätelhön, Arne; Bardow, André
Potential environmental benefits have been identified for the utilization of carbon dioxide (CO2) as a feedstock for polyurethanes (PUR). CO2 can be utilized in the PUR supply chain in a wide variety of ways ranging from direct CO2 utilization for polyols as a PUR precursor, to indirect CO2 utilization for basic chemicals in the PUR supply chain. In this paper, we present a systematic exploration and environmental evaluation of all direct and indirect CO2 utilization options for flexible and rigid PUR foams. The analysis is based on an LCA-based PUR supply chain optimization model using linear programming to identify PUR production with minimal environmental impacts. The direct utilization of CO2 for polyols allows for large specific impact reductions of up to 4 kg CO2-eq. and 2 kg oil-eq. per kg CO2 utilized, but the amounts of CO2 that can be utilized are limited to 0.30 kg CO2 per kg PUR. The amount of CO2 utilized can be increased to up to 1.7 kg CO2 per kg PUR by indirect CO2 utilization in the PUR supply chain. Indirect CO2 utilization requires hydrogen (H2). The environmental impacts of H2 production strongly affect the impact of indirect CO2 utilization in PUR. To achieve optimal environmental performance under the current fossil-based H2 generation, PUR production can only utilize much less CO2 than theoretically possible. Thus, utilizing as much CO2 in the PUR supply chain as possible is not always environmentally optimal. Clean H2 production is required to exploit the full CO2 utilization potential for environmental impact reduction in PUR production.
Network systems, including transportation and logistic systems, electric power generation and distribution networks as well as financial networks, provide the critical infrastructure for the functioning of our societies and economies. The understanding of the dynamic behavior of such systems is also crucial to national security and prosperity. The identification of new connections between distinct network systems is the inspiration for the research in this dissertation. In particular, I answer two questions raised by Beckmann, McGuire, and Winsten (1956) and Copeland (1952) over half a century ago, which are, respectively, how are electric power flows related to transportation flows and does money flow like water or electricity? In addition, in this dissertation, I achieve the following: (1) I establish the relationships between transportation networks and three other classes of complex network systems: supply chain networks, electric power generation and transmission networks, and financial networks with intermediation. The establishment of such connections provides novel theoretical insights as well as new pricing mechanisms, and efficient computational methods. (2) I develop new modeling frameworks based on evolutionary variational inequality theory that capture the dynamics of such network systems in terms of the time-varying flows and incurred costs, prices, and, where applicable, profits. This dissertation studies the dynamics of such network systems by addressing both internal competition and/or cooperation, and external changes, such as varying costs and demands. (3) I focus, in depth, on electric power supply chains. By exploiting the relationships between transportation networks and electric power supply chains, I develop a large-scale network model that integrates electric power supply chains and fuel supply markets. The model captures both the economic transactions as well as the physical transmission constraints. The model is then applied to the New
A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...
Arora, A.; Arora, A. Saxena
This article provides educators in business schools with a new interdisciplinary experiential lab game called Supply Chain-Marketing (SC-Mark) Shark Tank game, which can be implemented in both Supply Chain Management (SCM) and Marketing courses. The SC-Mark experiential lab game is a real-life business environment simulation that explores…
Rafael, Sandra; Tarelho, Luis; Monteiro, Alexandra; Monteiro, Tânia; Gonçalves, Catarina; Freitas, Sylvio; Lopes, Myriam
Abstract During the past decades, pressures on global environment and energy security have led to an increasing demand on renewable energy sources and diversification of the world's energy supply. The Portuguese energy strategy considers the use of Forest Biomass Residues (FBR) to energy as being essential to accomplish the goals established in the National Energy Strategy for 2020. However, despite the advantages pointing to FBR to the energy supply chain, few studies have evaluated the potential impacts on air quality. In this context, a case study was selected to estimate the atmospheric emissions of the FBR to the energy supply chain in Portugal. Results revealed that production, harvesting, and energy conversion processes are the main culprits for the biomass energy supply chain emissions (with a contribution higher than 90%), while the transport processes have a minor importance for all the pollutants. Compared with the coal-fired plants, the FBR combustion produces lower greenhouses emissions, on a mass basis of fuel consumed; the same is true for NOX and SO2 emissions. PMID:26064039
Rafael, Sandra; Tarelho, Luis; Monteiro, Alexandra; Monteiro, Tânia; Gonçalves, Catarina; Freitas, Sylvio; Lopes, Myriam
During the past decades, pressures on global environment and energy security have led to an increasing demand on renewable energy sources and diversification of the world's energy supply. The Portuguese energy strategy considers the use of Forest Biomass Residues (FBR) to energy as being essential to accomplish the goals established in the National Energy Strategy for 2020. However, despite the advantages pointing to FBR to the energy supply chain, few studies have evaluated the potential impacts on air quality. In this context, a case study was selected to estimate the atmospheric emissions of the FBR to the energy supply chain in Portugal. Results revealed that production, harvesting, and energy conversion processes are the main culprits for the biomass energy supply chain emissions (with a contribution higher than 90%), while the transport processes have a minor importance for all the pollutants. Compared with the coal-fired plants, the FBR combustion produces lower greenhouses emissions, on a mass basis of fuel consumed; the same is true for NOX and SO2 emissions.
Zakaria, Izatul Husna; Ibrahim, Jafni Azhan; Othman, Abdul Aziz
Green energy is becoming an important aspect of every country in the world toward energy security by reducing dependence on fossil fuel import and enhancing better life quality by living in the healthy environment. This conceptual paper is an approach toward determining physical flow's characteristic of waste wood biomass in high scale plantation toward producing gas fuel for electricity using gasification technique. The scope of this study is supply chain management of syngas fuel from wood waste biomass using direct gasification conversion technology. Literature review on energy security, Malaysia's energy mix, Biomass SCM and technology. This paper uses the theoretical framework of a model of transportation (Lumsden, 2006) and the function of the terminal (Hulten, 1997) for research purpose. To incorporate biomass unique properties, Biomass Element Life Cycle Analysis (BELCA) which is a novel technique develop to understand the behaviour of biomass supply. Theoretical framework used to answer the research questions are Supply Chain Operations Reference (SCOR) framework and Sustainable strategy development in supply chain management framework
The contemporary food system provides consumers with convenience, extensive choice, and the year-round availability of fresh produce. In this paper these achievements are recognized within the context of the associated environmental impacts. While many analyses have considered the energy and material efficiency of various options for food production and packaging, very few studies have investigated the environmental impacts of the transport components of food supply chains. This is surprising, given that the global sourcing of food produce, centralized distribution systems, and shopping by car have become prevalent in recent decades and have contributed to an increase in the distance between producer and consumer or "food miles." In a case study the transport energy consumption is calculated for all possible ways in which dessert apples can be supplied to the UK consumer. The aim is to assess the environmental performance of the predominant fresh produce supply chains and to investigate claims that localized systems are more environmentally efficient. The main criteria used to compare the environmental efficiency in alternative food supply chains are the transport-related fossil-fuel energy consumption and associated carbon dioxide emissions. Analysis of the empirical data shows that transportation is now responsible for a considerable fraction of the total energy consumption in the life cycle of fresh apples, and in most cases exceeds the energy consumed in commercial apple cultivation. By developing local production and marketing systems for fresh products, transport demand can be reduced and many of the environmental impacts associated with existing supply chains can be avoided. The results of the study are then discussed in relation to the wider issues of transport policy, international trade, food security, and product-related environmental information for consumers.
Li, Xueying; Peng, Ying; Zhang, Jing
Under the background of a low carbon economy, this paper examines the impact of carbon tax policy on supply chain network emission reduction. The integer linear programming method is used to establish a supply chain network emission reduction such a model considers the cost of CO2 emissions, and analyses the impact of different carbon price on cost and carbon emissions in supply chains. The results show that the implementation of a carbon tax policy can reduce CO2 emissions in building supply chain, but the increase in carbon price does not produce a reduction effect, and may bring financial burden to the enterprise. This paper presents a reasonable carbon price range and provides decision makers with strategies towards realizing a low carbon building supply chain in an economical manner.
Cutler, Cathy S; Schwarz, Sally W
The uncertain availability of (99m)Tc has become a concern for nuclear medicine departments across the globe. An issue for the United States is that currently it is dependent on a supply of (99m)Tc (from (99)Mo) that is derived solely by production outside the United States. Since the United States uses half the world's (99)Mo production, the U.S. (99)Mo supply chain would be greatly enhanced if a producer were located within the United States. The fragility of the old (99)Mo supply chain is being addressed as new facilities are constructed and new processes are developed to produce (99)Mo without highly enriched uranium. The conversion to low-enriched uranium is necessary to minimize the potential misuse of highly enriched uranium in the world for nonpeaceful means. New production facilities, new methods for the production of (99)Mo, and a new generator elution system for the supply of (99m)Tc are currently being pursued. The progress made in all these areas will be discussed, as they all highlight the need to embrace diversity to ensure that we have a robust and reliable supply of (99m)Tc in the future.
Hanes, Rebecca J.; Das, Sujit; Carpenter, Alberta
Vehicle lightweighting reduces the amount of fuel consumed in a vehicle's use phase, but depending on what lightweight materials replace the conventional materials, and in what amounts, the manufacturing energy may increase or decrease. For carbon fiber reinforced polymer (CFRP), a next-generation lightweighting material, the increase in vehicle manufacturing energy is greater than the fuel savings, resulting in a net increase in energy consumption over a vehicle's manufacturing and use relative to a standard non-lightweighted car.  This work explores ways to reduce the supply chain energy of CFRP lightweighted vehicles through alternative production technologies and energy efficiency improvements. The objective is to determine if CFRP can offer energy savings comparable to or greater than aluminum, a conventional lightweighting material. Results of this analysis can be used to inform additional research and development efforts in CFRP production and future directions in lightweight vehicle production. The CFRP supply chain is modeled using the Material Flows through Industry (MFI) scenario modeling tool, which calculates 'mine to materials' energy consumption, material inventories and greenhouse gas emissions for industrial supply chains. In this analysis, the MFI tool is used to model the supply chains of two lightweighted vehicles, an aluminum intensive vehicle (AIV) and a carbon fiber intensive vehicle (CFV), under several manufacturing scenarios. Vehicle specifications are given in . Scenarios investigated cover alternative carbon fiber (CF) feedstocks and energy efficiency improvements at various points in the vehicle supply chains. The alternative CF feedstocks are polyacrylonitrile, lignin and petroleum-derived mesophase pitch. Scenarios in which the energy efficiency of CF and CFRP production increases are explored using sector efficiency potential values, which quantify the reduction in energy consumption achievable when process equipment is
suppliers and customers. It is the responsibility of managers to oversee the relationships of their firm with other firms that exist in the same supply...other to deliver products or services for the end consumers ”. It is important to acknowledge that managing a supply chain requires a variety of... relationships between the supply chain members must be strongly developed and maintained. To build a high-performance relationship , the firm’s managers
AbuKhousa, Eman; Al-Jaroodi, Jameela; Lazarova-Molnar, Sanja; Mohamed, Nader
Recently, most healthcare organizations focus their attention on reducing the cost of their supply chain management (SCM) by improving the decision making pertaining processes' efficiencies. The availability of products through healthcare SCM is often a matter of life or death to the patient; therefore, trial and error approaches are not an option in this environment. Simulation and modeling (SM) has been presented as an alternative approach for supply chain managers in healthcare organizations to test solutions and to support decision making processes associated with various SCM problems. This paper presents and analyzes past SM efforts to support decision making in healthcare SCM and identifies the key challenges associated with healthcare SCM modeling. We also present and discuss emerging technologies to meet these challenges.
Sauders, B D; D'Amico, D J
Listeria monocytogenes has been the most common microbial cause of cheese-related recalls in both the United States and Canada in recent years. Since L. monocytogenes is inactivated by pasteurization, the majority of these cases have been linked to environmental and cross-contamination of fresh-soft, soft-ripened, and semi-soft cheeses. Cross-contamination of foods with L. monocytogenes is a continuous risk throughout the food supply chain and presents unique challenges for subsequent illness and outbreak investigations. Reports on outbreaks of listeriosis attributed to cross-contamination downstream from primary processing help highlight the critical role of epidemiological investigation coupled with coordinated molecular subtyping and surveillance in the recognition and investigation of complex foodborne outbreaks. Despite their complexity, environmental sampling throughout the supply chain coupled with improved genotyping approaches and concomitant analysis of foodborne illness epidemiological exposure data are needed to help resolve these and similar cases more rapidly and with greater confidence.
Producers are given increasing responsibility by governmental organizations to address environmental and human rights issues along the supply chain. While producers indeed have a responsibility to address these issues, governments' expectations of producers are often too high and in some cases unrealistic. Ruggie's framework to protect, respect and remedy provides a useful tool to determine the responsibilities of government and business in relation to human rights. If it is applied to product-related environmental aspects, which affect human rights, it offers a good tool to evaluate whether producer responsibility has been implemented in a way to institutionally align business and governments. An analysis of extended producer responsibility up and down the supply chain on the basis of waste electrical and electronic equipment (WEEE) legislation, REACH legislation and conflict minerals shows that such alignment has not been achieved.
Nepstad, Daniel; McGrath, David; Stickler, Claudia; Alencar, Ane; Azevedo, Andrea; Swette, Briana; Bezerra, Tathiana; DiGiano, Maria; Shimada, João; Seroa da Motta, Ronaldo; Armijo, Eric; Castello, Leandro; Brando, Paulo; Hansen, Matt C; McGrath-Horn, Max; Carvalho, Oswaldo; Hess, Laura
The recent 70% decline in deforestation in the Brazilian Amazon suggests that it is possible to manage the advance of a vast agricultural frontier. Enforcement of laws, interventions in soy and beef supply chains, restrictions on access to credit, and expansion of protected areas appear to have contributed to this decline, as did a decline in the demand for new deforestation. The supply chain interventions that fed into this deceleration are precariously dependent on corporate risk management, and public policies have relied excessively on punitive measures. Systems for delivering positive incentives for farmers to forgo deforestation have been designed but not fully implemented. Territorial approaches to deforestation have been effective and could consolidate progress in slowing deforestation while providing a framework for addressing other important dimensions of sustainable development.
Kumar, Sanjay; Luthra, Sunil; Haleem, Abid
The role of customers in green supply chain management needs to be identified and recognized as an important research area. This paper is an attempt to explore the involvement aspect of customers towards greening of the supply chain (SC). An empirical research approach has been used to collect primary data to rank different variables for effective customer involvement in green concept implementation in SC. An interpretive structural-based model has been presented, and variables have been classified using matrice d' impacts croises- multiplication appliqué a un classement analysis. Contextual relationships among variables have been established using experts' opinions. The research may help practicing managers to understand the interaction among variables affecting customer involvement. Further, this understanding may be helpful in framing the policies and strategies to green SC. Analyzing interaction among variables for effective customer involvement in greening SC to develop the structural model in the Indian perspective is an effort towards promoting environment consciousness.
Jiang, Chengzhi; Xu, Feng; Sheng, Zhaohan
This article addresses the pricing strategy problems in a supply chain system where the manufacturer sells original products and remanufactured products via indirect retailer channels and direct Internet channels. Due to the complexity of that system, agent technologies that provide a new way for analysing complex systems are used for modelling. Meanwhile, in order to reduce the computational load of searching procedure for optimal prices and profits, a learning search algorithm is designed and implemented within the multi-agent supply chain model. The simulation results show that the proposed model can find out optimal prices of original products and remanufactured products in both channels, which lead to optimal profits of the manufacturer and the retailer. It is also found that the optimal profits are increased by introducing direct channel and remanufacturing. Furthermore, the effect of customer preference, direct channel cost and remanufactured unit cost on optimal prices and profits are examined.
Mayer, Peter; Hauer, Katharina; Schloffer, Evelyn; Leyrer, Barbara
Health care systems in Austria and Slovenia are currently facing challenges due to scarce resources and demographic change which can be seen especially along the supply chains. The main objective of this paper is to present an option to improve the use of assistive technologies. An extensive literature research for the theoretic part as well as a qualitative survey for the empiric part focusing on short-term care were carried out. Results show that there is a lack of information and training on assistive technologies. As a consequence, their full potential cannot be exploited. Therefore a guideline for nursing consultations was developed. To conclude, both the literature research and the qualitative survey show that assistive technologies have high potentials to improve the supply chains in the health care and social services sector, but there is a lot of information and training on them needed.
Ghane, Mahdi; Tarokh, Mohammad Jafar
Unlike commonly used methods, in this paper, we have introduced a new approach for designing fuzzy controllers. In this approach, we have simultaneously optimized both objective functions of a supply chain over a two-dimensional space. Then, we have obtained a spectrum of optimized points, each of which represents a set of optimal parameters which can be chosen by the manager according to the importance of objective functions. Our used supply chain model is a member of inventory and order-based production control system family, a generalization of the periodic review which is termed `Order-Up-To policy.' An auto rule maker, based on non-dominated sorting genetic algorithm-II, has been applied to the experimental initial fuzzy rules. According to performance measurement, our results indicate the efficiency of the proposed approach.
Klein, Tobias; Niklas, Jens; Heinzle, Elmar
Metabolic bottlenecks play an increasing role in yeasts and mammalian cells applied for high-performance production of proteins, particularly of pharmaceutical ones that require complex posttranslational modifications. We review the present status and developments focusing on the rational metabolic engineering of such cells to optimize the supply chain for building blocks and energy. Methods comprise selection of beneficial genetic modifications, rational design of media and feeding strategies. Design of better producer cells based on whole genome-wide metabolic network analysis becomes increasingly possible. High-resolution methods of metabolic flux analysis for the complex networks in these compartmented cells are increasingly available. We discuss phenomena that are common to both types of organisms but also those that are different with respect to the supply chain for the production and secretion of pharmaceutical proteins.
Rego, Nazaré; Claro, João; Pinho de Sousa, Jorge
This paper presents an innovative and flexible approach for recommending the number, size and composition of purchasing groups, for a set of hospitals willing to cooperate, while minimising their shared supply chain costs. This approach makes the financial impact of the various cooperation alternatives transparent to the group and the individual participants, opening way to a negotiation process concerning the allocation of the cooperation costs and gains. The approach was developed around a hybrid Variable Neighbourhood Search (VNS)/Tabu Search metaheuristic, resulting in a flexible tool that can be applied to purchasing groups with different characteristics, namely different operative and market circumstances, and to supply chains with different topologies and atypical cost characteristics. Preliminary computational results show the potential of the approach in solving a broad range of problems.
Teng, Jinn-Tsair; Cárdenas-Barrón, Leopoldo Eduardo; Lou, Kuo-Ren; Wee, Hui Ming
In this article, we first complement an inappropriate mathematical error on the total cost in the previously published paper by Chung and Wee [2007, 'Optimal the Economic Lot Size of a Three-stage Supply Chain With Backlogging Derived Without Derivatives', European Journal of Operational Research, 183, 933-943] related to buyer-distributor-vendor three-stage supply chain with backlogging derived without derivatives. Then, an arithmetic-geometric inequality method is proposed not only to simplify the algebraic method of completing prefect squares, but also to complement their shortcomings. In addition, we provide a closed-form solution to integral number of deliveries for the distributor and the vendor without using complex derivatives. Furthermore, our method can solve many cases in which their method cannot, because they did not consider that a squared root of a negative number does not exist. Finally, we use some numerical examples to show that our proposed optimal solution is cheaper to operate than theirs.
For the past decade, a team at the Pacific Northwest National Laboratory (PNNL) has engaged industry to “go beyond compliance” in controlling and securing their supply chains to ensure their goods are not diverted to nuclear weapons programs. This work has focused on dual-use industries that manufacture products that can be used in both commercial applications and in the development of a nuclear weapon. The team encourages industry to self-regulate to reduce proliferation risks. As part of that work, PNNL interviewed numerous companies about their compliance practices in order to understand their business and to build awareness around best practices to ensure security of goods and information along their supply chains. As a result, PNNL has identified seven indicators that a company can adopt as part of their commitment to nonproliferation ideals.
Adelina, W.; Kusumastuti, R. D.
This study is about business strategy selection for green supply chain management (GSCM) for PT XYZ by using Analytic Network Process (ANP). GSCM is initiated as a response to reduce environmental impacts from industrial activities. The purposes of this study are identifying criteria and sub criteria in selecting GSCM Strategy, and analysing a suitable GSCM strategy for PT XYZ. This study proposes ANP network with 6 criteria and 29 sub criteria, which are obtained from the literature and experts’ judgements. One of the six criteria contains GSCM strategy options, namely risk-based strategy, efficiency-based strategy, innovation-based strategy, and closed loop strategy. ANP solves complex GSCM strategy-selection by using a more structured process and considering green perspectives from experts. The result indicates that innovation-based strategy is the most suitable green supply chain management strategy for PT XYZ.
Recently, most healthcare organizations focus their attention on reducing the cost of their supply chain management (SCM) by improving the decision making pertaining processes' efficiencies. The availability of products through healthcare SCM is often a matter of life or death to the patient; therefore, trial and error approaches are not an option in this environment. Simulation and modeling (SM) has been presented as an alternative approach for supply chain managers in healthcare organizations to test solutions and to support decision making processes associated with various SCM problems. This paper presents and analyzes past SM efforts to support decision making in healthcare SCM and identifies the key challenges associated with healthcare SCM modeling. We also present and discuss emerging technologies to meet these challenges. PMID:24683333
Coronado Mondragon, Adrian E.; Coronado, Etienne S.
Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848
Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S
Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.
Fullenkamp, Patrick H; Holody, Diane S
The goal of the project was to develop a greater understanding of the key factors determining wind energy component manufacturing costs and pricing on a global basis in order to enhance the competitiveness of U.S. manufacturers, and to reduce installed systems cost. Multiple stakeholders including DOE, turbine OEMs, and large component manufactures will all benefit by better understanding the factors determining domestic competitiveness in the emerging offshore and next generation land-based wind industries. Major objectives of this project were to: 1. Carry out global cost and process comparisons for 5MW jacket foundations, blades, towers, and permanent magnet generators; 2. Assess U.S. manufacturers’ competitiveness and potential for cost reduction; 3. Facilitate informed decision-making on investments in U.S. manufacturing; 4. Develop an industry scorecard representing the readiness of the U.S. manufacturers’ to produce components for the next generations of wind turbines, nominally 3MW land-based and 5MW offshore; 5. Disseminate results through the GLWN Wind Supply Chain GIS Map, a free website that is the most comprehensive public database of U.S. wind energy suppliers; 6. Identify areas and develop recommendations to DOE on potential R&D areas to target for increasing domestic manufacturing competitiveness, per DOE’s Clean Energy Manufacturing Initiative (CEMI). Lists of Deliverables 1. Cost Breakdown Competitive Analyses of four product categories: tower, jacket foundation, blade, and permanent magnet (PM) generator. The cost breakdown for each component includes a complete Bill of Materials with net weights; general process steps for labor; and burden adjusted by each manufacturer for their process categories of SGA (sales general and administrative), engineering, logistics cost to a common U.S. port, and profit. 2. Value Stream Map Competitiveness Analysis: A tool that illustrates both information and material flow from the point of getting a
Briggs, Charles Awoala
For an organization to be successful, an effective strategy is required, and if implemented appropriately the strategy will result in a sustainable competitive advantage. The importance of decision making in the oil industry is reflected in the magnitude and nature of the industry. Specific features of the oil industry supply chain, such as its longer chain, the complexity of its transportation system, its complex production and storage processes, etc., pose challenges to its effective management. Hence, understanding the risks, the risk sources, and their potential impacts on the oil industry's operations will be helpful in proposing a risk management model for the upstream oil supply chain. The risk-based model in this research uses a three-level analytic hierarchy process (AHP), a multiple-attribute decision-making technique, to underline the importance of risk analysis and risk management in the upstream crude oil supply chain. Level 1 represents the overall goal of risk management; Level 2 is comprised of the various risk factors; and Level 3 represents the alternative criteria of the decision maker as indicated on the hierarchical structure of the crude oil supply chain. Several risk management experts from different oil companies around the world were surveyed, and six major types of supply chain risks were identified: (1) exploration and production, (2) environmental and regulatory compliance, (3) transportation, (4) availability of oil, (5) geopolitical, and (6) reputational. Also identified are the preferred methods of managing risks which include; (1) accept and control the risks, (2) avoid the risk by stopping the activity, or (3) transfer or share the risks to other companies or insurers. The results from the survey indicate that the most important risk to manage is transportation risk with a priority of .263, followed by exploration/production with priority of .198, with an overall inconsistency of .03. With respect to major objectives the most
Curci, Vita; Dassisti, Michele; Josefa, Mula Bru; Manuel, Díaz Madroñero
Supply chain model (SCM) are potentially capable to integrate different aspects in supporting decision making for enterprise management tasks. The aim of the paper is to propose an hybrid mathematical programming model for optimization of production requirements resources planning. The preliminary model was conceived bottom-up from a real industrial case analysed oriented to maximize cash flow. Despite the intense computational effort required to converge to a solution, optimisation done brought good result in solving the objective function.
As a potential substitute for petroleum-based fuel, second generation biofuels are playing an increasingly important role due to their economic, environmental, and social benefits. With the rapid development of biofuel industry, there has been an increasing literature on the techno-economic analysis and supply chain design for biofuel production based on a variety of production pathways. A recently proposed production pathway of advanced biofuel is to convert biomass to bio-oil at widely distributed small-scale fast pyrolysis plants, then gasify the bio-oil to syngas and upgrade the syngas to transportation fuels in centralized biorefinery. This thesis aims to investigate two types of assessments on this bio-oil gasification pathway: techno-economic analysis based on process modeling and literature data; supply chain design with a focus on optimal decisions for number of facilities to build, facility capacities and logistic decisions considering uncertainties. A detailed process modeling with corn stover as feedstock and liquid fuels as the final products is presented. Techno-economic analysis of the bio-oil gasification pathway is also discussed to assess the economic feasibility. Some preliminary results show a capital investment of 438 million dollar and minimum fuel selling price (MSP) of $5.6 per gallon of gasoline equivalent. The sensitivity analysis finds that MSP is most sensitive to internal rate of return (IRR), biomass feedstock cost, and fixed capital cost. A two-stage stochastic programming is formulated to solve the supply chain design problem considering uncertainties in biomass availability, technology advancement, and biofuel price. The first-stage makes the capital investment decisions including the locations and capacities of the decentralized fast pyrolysis plants and the centralized biorefinery while the second-stage determines the biomass and biofuel flows. The numerical results and case study illustrate that considering uncertainties can be
Supply Chain in Department of Defense: Implications for the Program Management Infrastructure Published: 30 April 2007 by Rene G. Rendon, Lecturer, and Uday Apte, Professor, Naval Postgraduate School 4th Annual Acquisition Research Symposium of the Naval Postgraduate School: Approved for public release, distribution unlimited. Prepared for: Naval Postgraduate School, Monterey, California 93943 Acquisition Research: Creating Synergy for Informed Change May 16-17, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188
Services Supply Chain in the Department of Defense: Drivers of Acquisition Management Practices in the Army 13 February 2012 by Dr. Aruna ...mlpqdo^ar^qb=p`elli= About the Authors Dr. Aruna Apte is an Assistant Professor in the Operations and Logistics Management Department, Graduate School... Aruna Apte Graduate School of Business and Public Policy Naval Postgraduate School Monterey, CA 93943-5000 Tel: 831-656-7583 Fax: (831) 656-3407 E
Motiwala, Sanober S; McLaughlin, Joan E; King, John; Hodgson, Brent; Hamilton, Michael
While supply chain partnerships are common in the private industry, they are unique in health care. This article looks at the novel partnership between St. Michael's Hospital and Baxter Canada. By sharing information and working together, these organizations evaluated and tackled service disruptions caused by backorders. Their formal collaboration has resulted in a streamlined backorder management process, and more importantly, better and timelier patient care.
Pathfinder as a way to evaluate the functional benefits and applicability of this system to the Air Force maintenance, repair and overhaul environment...Kaczmarek, 2002). The Pathfinder was tested using the Supply Chain Reference (SCOR) model to identify areas and processes for improvement under...DLA requirements to funding needs (Kaczmarek et al., 2002). Early successes of the F101 APS Pathfinder initiative at Oklahoma City Air Logistics
Lantz, E.; Leventhal, M.; Baring-Gould, I.
As wind power facilities age, project owners are faced with plant end of life decisions. This report is intended to inform policymakers and the business community regarding the history, opportunities, and challenges associated with plant end of life actions, in particular repowering. Specifically, the report details the history of repowering, examines the plant age at which repowering becomes financially attractive, and estimates the incremental market investment and supply chain demand that might result from future U.S. repowering activities.
Heising, Jenneke K; Claassen, G D H; Dekker, Matthijs
Optimizing supply chain management can help to reduce food waste. This article describes how intelligent packaging can be used to reduce food waste when used in supply chain management based on Quality Controlled Logistics (QCL). Intelligent packaging senses compounds in the package that correlate with the critical quality attribute of a food product. The information on the quality of each individual packaged food item that is provided by the intelligent packaging can be used for QCL. In a conceptual approach is explained that monitoring food quality by intelligent packaging sensors makes it possible to obtain information about the variation in the quality of foods and use a dynamic expiration date (IP-DED) on a food package. The conceptual approach is supported by quantitative data from simulations on the effect of using the information of intelligent packaging in supply chain management with the goal to reduce food waste. This simulation shows that QCL by using the information on the quality of products that is provided by intelligent packaging can substantially reduce food waste. When QCL is combined with dynamic pricing based on the predicted expiry dates a further waste reduction is envisaged.
Goucher, Liam; Bruce, Richard; Cameron, Duncan D; Lenny Koh, S C; Horton, Peter
Food production and consumption cause approximately one-third of total greenhouse gas emissions(1-3), and therefore delivering food security challenges not only the capacity of our agricultural system, but also its environmental sustainability(4-7). Knowing where and at what level environmental impacts occur within particular food supply chains is necessary if farmers, agri-food industries and consumers are to share responsibility to mitigate these impacts(7,8). Here we present an analysis of a complete supply chain for a staple of the global diet, a loaf of bread. We obtained primary data for all the processes involved in the farming, production and transport systems that lead to the manufacture of a particular brand of 800 g loaf. The data were analysed using an advanced life cycle assessment (LCA) tool(9), yielding metrics of environmental impact, including greenhouse gas emissions. We show that more than half of the environmental impact of producing the loaf of bread arises directly from wheat cultivation, with the use of ammonium nitrate fertilizer alone accounting for around 40%. These findings reveal the dependency of bread production on the unsustainable use of fertilizer and illustrate the detail needed if the actors in the supply chain are to assume shared responsibility for achieving sustainable food production.
Cao, Jian; Chen, Yangyang; Lu, Bo; Tong, Chenlu; Zhou, Gengui
Based on the status that the green market began to develop (e.g. pharmaceutical industry) in Mainland China, the paper mainly discusses how members of the green supply chain (GSC) cooperate effectively in the process of the supply chain operations. For the uncertainties existing in the market demand of the green products, the GSC coordination strategy is put forward based on the Stackelberg game that the manufacturer is the leader and distributors are the followers. The relationship between the proposed coordination strategy and several factors including the distributor's amount, the distributor's risk aversion and the uncertainties of market demand are analyzed. It indicates that, when there are uncertainties existing in the market demand of the green product, the revenue of each enterprise, the overall revenue and the customer's welfare all decrease; while the increase in the number of distributors and low risk aversion of them are beneficial to the entire GSC and the customer. The conclusions have good guidance for the operational decisions of the green supply chain when the green market is in its initial formation.
Xu, Zhitao; Elomri, Adel; Pokharel, Shaligram; Zhang, Qin; Ming, X G; Liu, Wenjie
The emergence of concerns over environmental protection, resource conservation as well as the development of logistics operations and manufacturing technology has led several countries to implement formal collection and recycling systems of solid waste. Such recycling system has the benefits of reducing environmental pollution, boosting the economy by creating new jobs, and generating income from trading the recyclable materials. This leads to the formation of a global reverse supply chain (GRSC) of solid waste. In this paper, we investigate the design of such a GRSC with a special emphasis on three aspects; (1) uncertainty of waste collection levels, (2) associated carbon emissions, and (3) challenges posed by the supply chain's global aspect, particularly the maritime transportation costs and currency exchange rates. To the best of our knowledge, this paper is the first attempt to integrate the three above-mentioned important aspects in the design of a GRSC. We have used mixed integer-linear programming method along with robust optimization to develop the model which is validated using a sample case study of e-waste management. Our results show that using a robust model by taking the complex interactions characterizing global reverse supply chain networks into account, we can create a better GRSC. The effect of uncertainties and carbon constraints on decisions to reduce costs and emissions are also shown.
Jacob J. Jacobson; Md. S. Roni; Kara G. Cafferty; Sandra D. Eksioglu
In this paper we propose a model to design the supply chain for densified biomass. Rail is typically used for longhaul, high-volume shipment of densified biomass. This is the reason why a hub-and-spoke network structure is used to model this supply chain. The model is formulated as a multi-objective, mixed-integer programing problem under economic, environmental, and social criteria. The goal is to identify the feasibility of meeting the Renewable Fuel Standard (RFS) by using biomass for production of cellulosic ethanol. The focus is not just on the costs associated with meeting these standards, but also exploring the social and environmental benefits that biomass production and processing offers by creating new jobs and reducing greenhouse gas (GHG) emissions. We develop an augmented ?-constraint method to find the exact Pareto solution to this optimization problem. We develop a case study using data from the Mid-West. The model identifies the number, capacity and location of biorefineries needed to make use of the biomass available in the region. The model estimates the delivery cost of cellulosic ethanol under different scenario, the number new jobs created and the GHG emission reductions in the supply chain.
Gelinski, Jane Mary Lafayette Neves; Bombassaro, Amanda; Baratto, César Milton; Vicente, Vânia Aparecida
The prevalence of extended-spectrum β-lactamase (ESBL)-producing Enterobacteriaceae varies worldwide, however, the incidence of ESBL-producing environmental Salmonella isolates is increasing. Salmonella is still one of the most important pathogens that occur in the poultry supply chain. Therefore, this study analyzed the susceptibility of Salmonella isolates collected from a poultry supply chain to β-lactam antibiotics, and examined the phenotypes of the isolates based on enzyme-inducible AmpC β-lactamase analysis. All analysis of the putative positive isolates in the current study confirmed that 27.02% (77/285 analysis) of all ESBL tests realized with the isolates produced a profile of resistance consistent with β-lactamase production. All isolates of S. Minnesota serotype had ESBL phenotype. Aztreonam resistance was the least common amongst the Salmonella isolates, followed by ceftazidime. The presence of inducible chromosomal ESBL was detected in 14 different isolates of the 19 serotypes investigated. These results are very indicatives of the presence of ESBL genes in Salmonella isolates from a broiler supply chain, reaffirming the growing global problem of ESBL resistance.
Md S. Roni; Sandra Eksioglu; Kara G. Cafferty
In this paper we propose a model to design the supply chain for densified biomass. Rail is typically used for long-haul, high-volume shipment of densified biomass. This is the reason why a hub-and-spoke network structure is used to model this supply chain. The model is formulated as a multi-objective, mixed-integer programing problem under economic, environmental, and social criteria. The goal is to identify the feasibility of meeting the Renewable Fuel Standard (RFS) by using biomass for production of cellulosic ethanol. The focus in not just on the costs associated with meeting these standards, but also exploring the social and environmental benefits that biomass production and processing offers by creating new jobs and reducing greenhouse gas (GHG) emissions. We develop an augmented ?-constraint method to find the exact Pareto solution to this optimization problem. We develop a case study using data from the Mid-West. The model identifies the number, capacity and location of biorefineries needed to make use of the biomass available in the region. The model estimates the delivery cost of cellulosic ethanol under different scenario, the number new jobs created and the GHG emission reductions in the supply chain.
Gelinski, Jane Mary Lafayette Neves; Bombassaro, Amanda; Baratto, César Milton; Vicente, Vânia Aparecida
The prevalence of extended-spectrum β-lactamase (ESBL)-producing Enterobacteriaceae varies worldwide, however, the incidence of ESBL-producing environmental Salmonella isolates is increasing. Salmonella is still one of the most important pathogens that occur in the poultry supply chain. Therefore, this study analyzed the susceptibility of Salmonella isolates collected from a poultry supply chain to β-lactam antibiotics, and examined the phenotypes of the isolates based on enzyme-inducible AmpC β-lactamase analysis. All analysis of the putative positive isolates in the current study confirmed that 27.02% (77/285 analysis) of all ESBL tests realized with the isolates produced a profile of resistance consistent with β-lactamase production. All isolates of S. Minnesota serotype had ESBL phenotype. Aztreonam resistance was the least common amongst the Salmonella isolates, followed by ceftazidime. The presence of inducible chromosomal ESBL was detected in 14 different isolates of the 19 serotypes investigated. These results are very indicatives of the presence of ESBL genes in Salmonella isolates from a broiler supply chain, reaffirming the growing global problem of ESBL resistance. PMID:25402566
Meng, Jing; Liu, Junfeng; Xu, Yuan; Tao, Shu
In this study, we examine a supply-chain approach to more effectively mitigate primary PM2.5 emissions in China from the perspectives of production, consumption and their linkages using structural path analysis. We identify the pattern of all supply chain paths using principal component analysis. To address the severe haze problems in China, it is important to understand how final demand purchase initiates production processes and ultimately leads to primary PM2.5 emission. We found that consumers’ demands on power and transportation mainly induce direct emissions, quite different from the demands on construction, industry and service products which largely drive emissions in upstream activities. We also found that nearly 80% of the economic sectors in China follow a similar pattern in generating primary PM2.5 emissions in electricity, cement and the ferrous metal industries; but only the construction sector increases the release of PM2.5 due to the production of non-metallic mineral products. These findings indicate that further reduction of end-of-pipe emissions in the power and transportation sectors will facilitate cleaner production in almost all the economic sectors. However, for urbanization induced emissions, China should mitigate PM2.5 emissions through the supply chain of construction, either severely reducing its life-cycle intensity or carefully planning to avoid extensive, unnecessary building activity.
In the last decade supply chain clusters phenomenon has emerged as a new approach in product innovation studies. This article makes three contributions to the approach by addressing some open issues. The first contribution is to explicitly incorporate the energy levels in the analysis. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. The second contribution is to suggest an analytical distinction between different evolution method, actors involved in them, and the institutions which guide actor's perceptions and activities. Thirdly, the article opens up the black box of institutions, making them an integral part of supply chain. The article provides a coherent conceptual multi-level perspective, using insights from sociology, institutional theory and innovation studies. The perspective is particularly useful to analyze long-term dynamics supply chain clusters phenomenon, shifts from one energy level to another and the co-evolution of product innovation.
The paper begins by asking why there is a market for counterfeit medicines, which in effect creates the problem of counterfeiting itself. Contributing factors include supply chain complexity and the lack of whole-systems thinking. These two underpin the author's view that counterfeiting is a complex (i.e. wicked) problem, and that corporate, public policy and regulatory actions need to be mindful of how their actions may be causal. The paper offers a problem-based review of key components of this complexity, viz., the knowledge end-users/consumers have of medicines; whether restrictive information policies may hamper information provision to patients; the internet's direct access to consumers; internet-enabled distribution of unsafe and counterfeit medicines; whether the internet is a parallel and competitive supply chain to legitimate routes; organised crime as an emerging medicines manufacturer and supplier and whether substandard medicines is really the bigger problem. Solutions respect the perceived complexity of the supply chain challenges. The paper identifies the need to avoid technologically-driven solutions, calling for 'technological agnosticism'. Both regulation and public policy need to reflect the dynamic nature of the problem and avoid creating perverse incentives; it may be, for instance, that medicines pricing and reimbursement policies, which affect consumer/patient access may act as market signals to counterfeiters, since this creates a cash market in cheaper drugs.
Dwicahyani, A. R.; Jauhari, W. A.; Kurdhi, N. A.
The study of returned item inventory management in a closed-loop supply chain system has become an important issue in recent years. So far, investigations about inventory decision making in a closed-loop supply chain system have been confined to traditional forward and reverse oriented material flow supply chain. In this study, we propose an integrated inventory model consisting a supplier, a manufacturer, and a retailer where the manufacturer inspects all of the returned items collected from the customers and classifies them as recoverable or waste. Returned items that recovered through the remanufacturing process and the newly manufactured products are then used to meet the demand of the retailer. However, some recovered items which are not comparable to the ones in quality, classified as refurbished items, are sold to a secondary market at a reduced price. This study also suggests that the flow of returned items is controlled by a decision variable, namely an acceptance quality level of recoverable item in the system. We apply multiple remanufacturing cycle and multiple production cycle policy to the proposed model and give the corresponding iterative procedure to determine the optimal solutions. Further, numerical examples are presented for illustrative purpose.
Luthra, S.; Garg, D.; Haleem, A.
Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.
Slade, Raphael; Bauen, Ausilio; Shah, Nilay
Background Calculating the greenhouse gas savings that may be attributed to biofuels is problematic because production systems are inherently complex and methods used to quantify savings are subjective. Differing approaches and interpretations have fuelled a debate about the environmental merit of biofuels, and consequently about the level of policy support that can be justified. This paper estimates and compares emissions from plausible supply chains for lignocellulosic ethanol production, exemplified using data specific to the UK and Sweden. The common elements that give rise to the greatest greenhouse gas emissions are identified and the sensitivity of total emissions to variations in these elements is estimated. The implications of including consequential impacts including indirect land-use change, and the effects of selecting alternative allocation methods on the interpretation of results are discussed. Results We find that the most important factors affecting supply chain emissions are the emissions embodied in biomass production, the use of electricity in the conversion process and potentially consequential impacts: indirect land-use change and fertiliser replacement. The large quantity of electricity consumed during enzyme manufacture suggests that enzymatic conversion processes may give rise to greater greenhouse gas emissions than the dilute acid conversion process, even though the dilute acid process has a somewhat lower ethanol yield. Conclusion The lignocellulosic ethanol supply chains considered here all lead to greenhouse gas savings relative to gasoline An important caveat to this is that if lignocellulosic ethanol production uses feedstocks that lead to indirect land-use change, or other significant consequential impacts, the benefit may be greatly reduced. Co-locating ethanol, electricity generation and enzyme production in a single facility may improve performance, particularly if this allows the number of energy intensive steps in enzyme
Cafferty, Kara G.; Searcy, Erin M.; Nguyen, Long; Spatari, Sabrina
To meet Energy Independence and Security Act (EISA) cellulosic biofuel mandates, the United States will require an annual domestic supply of about 242 million Mg of biomass by 2022. To improve the feedstock logistics of lignocellulosic biofuels and access available biomass resources from areas with varying yields, commodity systems have been proposed and designed to deliver on-spec biomass feedstocks at preprocessing “depots”, which densify and stabilize the biomass prior to long-distance transport and delivery to centralized biorefineries. The harvesting, preprocessing, and logistics (HPL) of biomass commodity supply chains thus could introduce spatially variable environmental impacts into the biofuel life cycle due to needing to harvest, move, and preprocess biomass from multiple distances that have variable spatial density. This study examines the uncertainty in greenhouse gas (GHG) emissions of corn stover logisticsHPL within a bio-ethanol supply chain in the state of Kansas, where sustainable biomass supply varies spatially. Two scenarios were evaluated each having a different number of depots of varying capacity and location within Kansas relative to a central commodity-receiving biorefinery to test GHG emissions uncertainty. Monte Carlo simulation was used to estimate the spatial uncertainty in the HPL gate-to-gate sequence. The results show that the transport of densified biomass introduces the highest variability and contribution to the carbon footprint of the logistics HPL supply chain (0.2-13 g CO2e/MJ). Moreover, depending upon the biomass availability and its spatial density and surrounding transportation infrastructure (road and rail), logistics HPL processes can increase the variability in life cycle environmental impacts for lignocellulosic biofuels. Within Kansas, life cycle GHG emissions could range from 24 to 41 g CO2e/MJ depending upon the location, size and number of preprocessing depots constructed. However, this
ååì~ä=^Åèìáëáíáçå= oÉëÉ~êÅÜ=póãéçëáìã= MANAGING THE SERVICES SUPPLY CHAIN IN THE DEPARTMENT OF DEFENSE: AN EMPIRICAL STUDY OF CURRENT MANAGEMENT...TITLE AND SUBTITLE Managing the Services Supply Chain in the Department of Defense: An Empirical Study of Current Management Practices 5a. CONTRACT...INTENTIONALLY LEFT BLANK = = ==================aÉÑÉåëÉ=^Åèìáëáíáçå=áå=qê~åëáíáçå======== - 279 - = = Managing the Services Supply Chain in the
system?s Agility IQ ?? and ?What is the requisite amount of Agility that is required?? This paper suggests a way forward and illustrates it, in the...answer two questions. “How can we measure a system’s Agility IQ ?” and “What is the requisite amount of Agility that is required?” This paper...agility is worth our attention. AQ can be patterned after the Intelligence Quotient ( IQ ). IQ is a score that is associated with educational potential
Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei
In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain. PMID:26431340
Liang, Wanjie; Cao, Jing; Fan, Yan; Zhu, Kefeng; Dai, Qiwei
In recent years, traceability systems have been developed as effective tools for improving the transparency of supply chains, thereby guaranteeing the quality and safety of food products. In this study, we proposed a cattle/beef supply chain traceability model and a traceability system based on radio frequency identification (RFID) technology and the EPCglobal network. First of all, the transformations of traceability units were defined and analyzed throughout the cattle/beef chain. Secondly, we described the internal and external traceability information acquisition, transformation, and transmission processes throughout the beef supply chain in detail, and explained a methodology for modeling traceability information using the electronic product code information service (EPCIS) framework. Then, the traceability system was implemented based on Fosstrak and FreePastry software packages, and animal ear tag code and electronic product code (EPC) were employed to identify traceability units. Finally, a cattle/beef supply chain included breeding business, slaughter and processing business, distribution business and sales outlet was used as a case study to evaluate the beef supply chain traceability system. The results demonstrated that the major advantages of the traceability system are the effective sharing of information among business and the gapless traceability of the cattle/beef supply chain.
Andrews, James; Benisch, Michael; Sardinha, Alberto; Sadeh, Norman
The Supply Chain Trading Agent Competition (TAC SCM) was designed to explore approaches to dynamic supply chain trading. During the course of each year's competition historical data is logged describing more than 800 games played by different agents from around the world. In this paper, we present analysis that is focused on determining which features of agent behavior, such as the average lead time requested for supplies or the average selling price offered on finished products, tend to differentiate agents that win from those that do not. We present a visual inspection of data from 16 games played in one bracket of the 2006 TAC SCM semi-final rounds. Plots of data from these games help isolate behavioral features that distinguish top performing agents in this bracket. We then introduce a metric based on information gain to provide a more complete analysis of the 80 games played in the 2006 TAC SCM quarter-final, semi-final and final rounds. The metric captures the amount of information that is gained about an agent's performance by knowing its value for each of 20 different behavioral features. Using this metric we find that, in the final rounds of the 2006 competition, winning agents distinguished themselves by their procurement decisions, rather than their customer bidding decisions. We also discuss how we used the analysis presented in this paper to improve our entry for the 2007 competition, which was one of the six finalists that year.
Molemodile, Shola; Wotogbe, Maruchi; Abimbola, Seye
Responsibility for immunisation in Nigeria is decentralised to sub-national governments. So far, they have failed to achieve optimal coverage for their populations. We evaluated a pilot intervention implemented between 2013 and 2014 to redesign a vaccine supply chain management system in Kano, Nigeria. The intervention included financing immunisation services from a designated pool of government and donor funds, a visibility tool to track vaccine stock, and a private vendor engaged to deliver vaccines directly to health facilities. The number of local government areas within the state with adequate vaccine stock increased from 21% to 98% after 10 months. To understand how the intervention achieved this outcome, we analysed immunisation coverage for the period and interviewed 18 respondents across different levels of government. We found that the intervention worked by improving ownership and accountability for immunisation by sub-national governments and their capacity for generating resources and management (of data and the supply chain). While the intervention focused on improving immunisation coverage, we identified gaps in the demand for services. Efforts to improve immunisation coverage and vaccine supply systems should streamline decentralised structures, empower sub-national governments with financial and technical capacity, and promote strategies to improve the demand and use of services.
Zehrung, Darin; Jarrahian, Courtney; Giersing, Birgitte; Kristensen, Debra
A variety of vaccine packaging and delivery technologies may benefit the immunization supply chain. These include alternative primary packaging, such as blow-fill-seal polymer containers, and novel delivery technologies, such intradermal delivery devices, microarray patches, and sublingual formulations of vaccines, and others in development. The potential timeline to availability of these technologies varies and depends on their stage of development and the type of data necessary to achieve licensure. Some new delivery devices are anticipated to be introduced in 2017, such as intradermal devices for delivery of inactivated poliovirus vaccine to stretch vaccine supplies due to a supply limitation. Other new technologies requiring vaccine reformulation, such as microarray patches and sublingual vaccines, may become available in the long term (2021 and beyond). Development of many new technologies requires partnership between vaccine and technology manufacturers and identification of the applicable regulatory pathway. Interaction with public-sector stakeholders early on (through engagement with forums such as the World Health Organization's Immunization Practices Advisory Committee Delivery Technologies Working Group) is important to ensure suitability for immunization program use. Key considerations for programmatic suitability of a new vaccine, packaging, and delivery device include cold chain volume, costs, and health impact.
Van Der Fels-Klerx, H J; Jacobs-Reitsma, W F; Van Brakel, R; Van Der Voet, H; Van Asselt, E D
This article presents detailed information on Salmonella prevalence throughout the broiler supply chain in The Netherlands, based on results from a national monitoring program. Data were collected during the period 2002 through 2005 and from six sampling points in the chain, covering hatchery up to and including processing. Trends in Salmonella prevalence over years and seasons were analyzed as well as the effect of slaughterhouse capacity on these trends. In addition, correlations between the occurrence of Salmonella at the various sampling points were calculated. The results showed a decreasing trend of Salmonella prevalence from 2002 through 2005 at all sampling points. A seasonal effect on the occurrence of Salmonella was found at the broiler farm, with a higher prevalence during the third and fourth quarter of the year (July through December). The higher the capacity of the slaughterhouse, the lower Salmonella prevalence on arrival at the slaughterhouse and the higher the prevalence at the end of slaughter and the end of processing. The detailed insights obtained in this study could be used to focus future field and experimental research on the prevention and control of Salmonella in the broiler supply chain. Results presented could also be used in risk assessment studies.
Esmaeilzadeh, Afshin; Taleizadeh, Ata Allah
In this research, the optimal pricing decisions for two complementary products in a two-echelon supply chain under two scenarios are studied. The proposed supply chain in each echelon includes one retailer and two manufacturers and the same complementary products are produced. In the first scenario, we assume the unit manufacturing costs of the complementary products in each echelon are the same, while in the second one the different unit manufacturing costs are supposed and lead to demand leakage from the echelon with the higher unit manufacturing cost to the echelon with the lower unit manufacturing cost. Moreover, under the second scenario, the products with lower price are replaced with the higher price products. The purpose of this study is to analyze the effects of different market powers between the manufacturers and the retailer and the demand leakage on the optimal wholesale and retail prices and also on the profit of the chain. The relationships between the manufacturers and the retailer are modeled by the MS-Stackelberg and MS-Bertrand game-theoretic approach where the manufacturers are leaders and the retailers are followers.
Tseng, Shih-Chang; Hung, Shiu-Wan
Incorporating sustainability into supply chain management has become a critical issue driven by pressures from governments, customers, and various stakeholder groups over the past decade. This study proposes a strategic decision-making model considering both the operational costs and social costs caused by the carbon dioxide emissions from operating such a supply chain network for sustainable supply chain management. This model was used to evaluate carbon dioxide emissions and operational costs under different scenarios in an apparel manufacturing supply chain network. The results showed that the higher the social cost rate of carbon dioxide emissions, the lower the amount of the emission of carbon dioxide. The results also suggested that a legislation that forces the enterprises to bear the social costs of carbon dioxide emissions resulting from their economic activities is an effective approach to reducing carbon dioxide emissions.
Nasiri, G. Reza; Davoudpour, Hamid; Movahedi, Yaser
Distribution decisions play an important role in the strategic planning of supply chain management. In order to use the most proper strategic decisions in a supply chain, decision makers should focus on the identification and management of the sources of uncertainties in the supply chain process. In this paper these conditions in a multi-period problem with demands changed over the planning horizon is considered. We develop a non-linear mixed-integer model and propose an efficient heuristic genetic based algorithm which finds the optimal facility locations/allocation, relocation times and the total cost, for the whole supply chain. To explore the viability and efficiency of the proposed model and the solution approach, various computational experiments are performed based on the real size case problems.
This collection of case studies illustrates how supply chain management practices can be improved by determining the financial impact of business activities that have an impact on a company’s environmental performance.
of services and the increasing importance of services acquisition offer a unique and significant opportunity for conducting research in the management of the service supply chain in the Department of Defense.
Pal, Brojeswar; Sankar Sana, Shib; Chaudhuri, Kripasindhu
This study considers a two-echelon competitive supply chain consisting of two rivaling retailers and one common supplier with trade credit policy. The retailers hope that they can enhance their market demand by offering a credit period to the customers and the supplier also offers a credit period to the retailers. We assume that the market demand of the products of one retailer depends not only on their own market price and offering a credit period to the customers, but also on the market price and offering a credit period of the other retailer. The supplier supplies the product with a common wholesale price and offers the same credit period to the retailers. We study the model under a centralised (integrated) case and a decentralised (Vertical Nash) case and compare them numerically. Finally, we investigate the model by the collected numerical data.
Iakovou, E; Karagiannidis, A; Vlachos, D; Toka, A; Malamakis, A
The development of renewable energy sources has clearly emerged as a promising policy towards enhancing the fragile global energy system with its limited fossil fuel resources, as well as for reducing the related environmental problems. In this context, waste biomass utilization has emerged as a viable alternative for energy production, encompassing a wide range of potential thermochemical, physicochemical and bio-chemical processes. Two significant bottlenecks that hinder the increased biomass utilization for energy production are the cost and complexity of its logistics operations. In this manuscript, we present a critical synthesis of the relative state-of-the-art literature as this applies to all stakeholders involved in the design and management of waste biomass supply chains (WBSCs). We begin by presenting the generic system components and then the unique characteristics of WBSCs that differentiate them from traditional supply chains. We proceed by discussing state-of-the-art energy conversion technologies along with the resulting classification of all relevant literature. We then recognize the natural hierarchy of the decision-making process for the design and planning of WBSCs and provide a taxonomy of all research efforts as these are mapped on the relevant strategic, tactical and operational levels of the hierarchy. Our critical synthesis demonstrates that biomass-to-energy production is a rapidly evolving research field focusing mainly on biomass-to-energy production technologies. However, very few studies address the critical supply chain management issues, and the ones that do that, focus mainly on (i) the assessment of the potential biomass and (ii) the allocation of biomass collection sites and energy production facilities. Our analysis further allows for the identification of gaps and overlaps in the existing literature, as well as of critical future research areas.
Avadí, Angel; Fréon, Pierre; Tam, Jorge
Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities.
Aguilar, Susanna D.
As a cost effective storage technology for renewable energy sources, Electric Vehicles can be integrated into energy grids. Integration must be optimized to ascertain that renewable energy is available through storage when demand exists so that cost of electricity is minimized. Optimization models can address economic risks associated with the EV supply chain- particularly the volatility in availability and cost of critical materials used in the manufacturing of EV motors and batteries. Supply chain risk can reflect itself in a shortage of storage, which can increase the price of electricity. We propose a micro-and macroeconomic framework for managing supply chain risk through utilization of a cost optimization model in combination with risk management strategies at the microeconomic and macroeconomic level. The study demonstrates how risk from the EVs vehicle critical material supply chain affects manufacturers, smart grid performance, and energy markets qualitatively and quantitatively. Our results illustrate how risk in the EV supply chain affects EV availability and the cost of ancillary services, and how EV critical material supply chain risk can be mitigated through managerial strategies and policy.
Avadí, Angel; Fréon, Pierre; Tam, Jorge
Sustainability assessment of food supply chains is relevant for global sustainable development. A framework is proposed for analysing fishfood (fish products for direct human consumption) supply chains with local or international scopes. It combines a material flow model (including an ecosystem dimension) of the supply chains, calculation of sustainability indicators (environmental, socio-economic, nutritional), and finally multi-criteria comparison of alternative supply chains (e.g. fates of landed fish) and future exploitation scenarios. The Peruvian anchoveta fishery is the starting point for various local and global supply chains, especially via reduction of anchoveta into fishmeal and oil, used worldwide as a key input in livestock and fish feeds. The Peruvian anchoveta supply chains are described, and the proposed methodology is used to model them. Three scenarios were explored: status quo of fish exploitation (Scenario 1), increase in anchoveta landings for food (Scenario 2), and radical decrease in total anchoveta landings to allow other fish stocks to prosper (Scenario 3). It was found that Scenario 2 provided the best balance of sustainability improvements among the three scenarios, but further refinement of the assessment is recommended. In the long term, the best opportunities for improving the environmental and socio-economic performance of Peruvian fisheries are related to sustainability-improving management and policy changes affecting the reduction industry. Our approach provides the tools and quantitative results to identify these best improvement opportunities. PMID:25003196
Ismail, Adam; Rice, Harry B
The U.S. military may consider exploring the inclusion of the long-chain omega-3 fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), in the diets of active duty military personnel. To be successful, certain challenges must be overcome including determining appropriate dosage, ensuring cost efficiency, and optimizing stability. To increase EPA and DHA intake, the military should consider using one of three strategies, including mandates or recommendations on omega-3 supplement usage, contracts to purchase commercially available foods for distribution in the food supply chain, or direct addition of EPA and DHA into currently consumed foods. This review presents the challenges and strategies and provides potential suggestions to the military to increase the likelihood of success.
The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.
Leão, Raphael Riemke de Campos Cesar; Hamacher, Silvio; Oliveira, Fabrício
This article presents a methodology for conceiving and planning the development of an optimized supply chain of a biodiesel plant sourced from family farms and taking into consideration agricultural, logistic, industrial, and social aspects. This model was successfully applied to the production chain of biodiesel fuel from castor oil in the semi-arid region of Brazil. Results suggest important insights related to the optimal configuration of the crushing units, regarding its location, technology, and when it should be available, as well as the configuration of the production zones along the planning horizon considered. Moreover, a sensitivity analysis is performed in order to measure how possible variations in the considered conjecture can affect the robustness of the solutions.
Alimonti, Gianluca; Brambilla, Riccardo; Pileci, Rosaria; Romano, Riccardo; Rosa, Francesca; Spinicci, Luca
Energy is life. Without it there is no water, there is no nutrition. Man's ability to live, grow, produce wealth is closely linked to the energy availability and use. Fire has been the first energy conversion technology; since that moment, the link between energy and progress has been indissoluble. Nowadays, a much greater energy input into the food supply chain has made a much higher food production possible. This might have an impact on the water availability. Algae are a promising solution for the energy-food-water nexus.
Zhang, Cuihua; Xing, Peng; Wang, Jianwei
Service quality preference behaviors of both members are considered in service supply chain (SSC) including a service integrator and a service provider with stochastic demand. Through analysis of service quality cost and revenue, the utility functions are established on service quality effort degree and service quality preference level in integrated and decentralized SSC. Nash equilibrium and quantum game are used to optimize the models. By comparing the different solutions, the optimal strategies are obtained in SSC with quality preference. Then some numerical examples are studied and the changing trend of service quality effort is further analyzed by the influence of the entanglement operator and quality preferences.
Wang, Hai-ying; Liu, Da-cheng; Ding, Hua; Guo, Fu
We consider a serial supply chain consisting of a raw material supplier, a manufacturer, a distribution centre and a retailer in the presence of time-varying delivery between manufacturer facility and the retailer warehouse. Delivery time functions are developed based on practical data analysis and the cost models for both linear and non-linear delivery time functions are derived. Analytic solution for system with linear delivery times is derived and a search algorithm for system with non-linear delivery times is established. Finally, sensitivity analysis is made to help decision makers achieve a lower total cost in practice.
Rossi, Maddalena Elisa; Neubauer, Karolin; Weigel, Angelika; Wendt, Hanna; von Rad, Kathrin; Romer, Georg; Löwe, Bernd; Gumz, Antje
So far there is no comprehensive overview on brief outpatient interventions in eating disorders. The specific relevance of psychotherapeutic brief interventions for Anorexia Nervosa, Bulimia Nervosa and Binge Eating Disorder is presented against the background of current healthcare supply chains. This review is based on a literature search that evaluated relevant publications in applicable literature databases. The articles were excerpted and are presented in a narrative overview. In summary, the literature shows a marginal expansion of healthcare provision towards personnel-efficient and cost economic therapeutic solutions for Bulimia Nervosa and Binge Eating Disorder, while the treatment of Anorexia Nervosa is currently determined by more in- and extensive approaches.
Milićević, D; Nastasijevic, I; Petrovic, Z
Mycotoxins are a group of naturally occurring toxic chemical substances, produced mainly by microscopic filamentous fungal species. Regarding potential synergisms or even mitigating effects between toxic elements, mycotoxin contamination will continue to be an area of concern for producers, manufacturers, regulatory agencies, researchers, and consumers in the future. In Serbia, recent drought and then flooding confirmed that mycotoxins are one of the foodborne hazards most susceptible to climate change. In this article, we review key aspects of mycotoxin contamination of the food supply chain and implications for public health from the Serbian perspective.
Carlo, Lorena; Bakken, Suzanne; Mamykina, Lena; Kodie, Richmond; Kanter, Andrew S
The maintenance of adequate quantities of antimalarial medicines and rapid diagnostic tests (RDTs) at health facilities in rural areas of sub-Saharan Africa is a challenging task because of poor supply chain management. Antimalarial stock-outs in the communities could lead patients (that need to travel long distances to get medications) to remain untreated, develop severe malaria and die. A prototype to improve the management of health commodities in rural Ghana through the visualization of current stock levels and the forecasting of commodities is proposed.
Ren, X; Li, M; Xu, C; Cui, K; Feng, Z; Fu, Y; Zhang, J; Liao, M
A total of 1145 samples were collected from chicken breeder farms, hatcheries, broiler farms, a slaughterhouse and retail refrigerated chicken stores in an integrated broiler supply chain in Guangdong Province, China, in 2013. One-hundred and two Salmonella enterica strains were isolated and subjected to serotyping, antimicrobial susceptibility testing, virulence profile determination and molecular subtyping by pulsed field gel electrophoresis (PFGE). The contamination rates in samples from breeder farms, hatcheries, broiler farms, the slaughterhouse and retail stores were 1·46%, 4·31%, 7·00%, 62·86% and 54·67%, respectively. The isolated strains of S. enterica belonged to 10 serotypes; most of them were S. Weltevreden (46·08%, 47/102) and S. Agona (18·63%, 19/102). Isolates were frequently resistant to streptomycin (38·2%), tetracycline (36·3%), sulfisoxazole (35·3%) and gentamicin (34·3%); 31·4% of isolates were multidrug resistant. The isolates were screened for 10 virulence factors. The Salmonella pathogenicity island genes avrA, ssaQ, mgtC, siiD, and sopB and the fimbrial gene bcfC were present in 100% of the strains. PFGE genotyping of the 102 S. enterica isolates yielded 24 PFGE types at an 85% similarity threshold. The PFGE patterns show that the genotypes of S. enterica in the production chain are very diverse, but some strains have 100% similarity in different parts of the production chain, which indicates that some S. enterica persist throughout the broiler supply chain.
Three key items – iceberg lettuce , romaine lettuce , and broccoli crowns – were tested in the Pacific Region Guam supply chain. Due to longer total...STORAGE STABILITY LOGISTICS MANAGEMENT SUPPLIES LETTUCE AFGHANISTAN FOOD SERVICE MAP(MODIFIED ATMOSPHERE...22 3.1 Iceberg Lettuce
Chandani, Yasmin; Andersson, Sarah; Heaton, Alexis; Noel, Megan; Shieshia, Mildred; Mwirotsi, Amanda; Krudwig, Kirstin; Nsona, Humphreys; Felling, Barbara
Background A UNICEF review of the challenges to scaling up integrated community case management (iCCM) found that drug shortages were a common bottleneck. In many settings, little thought has gone into the design of supply chains to the community level and limited evidence exists for how to address these unique challenges. SC4CCM’s purpose was to conduct intervention research to identify proven, simple, affordable solutions that address the unique supply chain challenges faced by CHWs and to demonstrate that supply chain constraints at the community level can be overcome. Methods SC4CCM selected three countries to implement supply chain innovations and developed a theory of change (TOC) framework for the learning phase, which identified the main drivers of product availability and was used for baseline assessments, design, implementation and evaluation of interventions in Ethiopia, Malawi, and Rwanda. Interventions were developed in each country and tested over 12–24 months. Mixed–method follow up assessments were conducted in each country in 2012–2013. The Supply Chain for Community Case Management (SC4CCM) Project then simplified the TOC into a Community Health Supply Chain (CHSC) framework to enable cross country analysis Results The findings from interventions in the three countries suggest that the greatest supply chain benefits are realized when all three CHSC framework elements (data flow, product flow, and effective people) are in place and working together. The synergistic effect of these three elements on supply chain performance was most effectively demonstrated by results from the Enhanced Management and Quality Collaborative interventions in Malawi and Rwanda, respectively, which were characterized by lower mean stockout rates and higher in stock rates on day of visit, when compared to other interventions. Conclusions Many conditions are necessary to ensure continuous product availability at the community level, however a supply chain works
Roberts, Renée J; Wilson, Ashley E; Quezado, Zenaide
Six Sigma and Lean methodologies are effective quality improvement tools in many health care settings. We applied the DMAIC methodology (define, measure, analyze, improve, control) to address deficiencies in our pediatric anesthesia supply chain. We defined supply chain problems by mapping existing processes and soliciting comments from those involved. We used daily distance walked by anesthesia technicians and number of callouts for missing supplies as measurements that we analyzed before and after implementing improvements (anesthesia cart redesign). We showed improvement in the metrics after those interventions were implemented, and those improvements were sustained and thus controlled 1 year after implementation.
Cohn, Jennifer; von Schoen-Angerer, Tido; Jambert, Elodie; Arreghini, Guido; Childs, Michelle
Falsified and substandard medicines present serious concerns for public health. We describe an event that occurred in late 2011 involving falsified antiretroviral medicines found in the supplies of Médecins Sans Frontières (MSF) projects in Kenya. We discuss factors contributing to these falsified medicines entering the supply chain as well as the response by MSF and others. We make recommendations to help defend against future episodes of entry of falsified medicines into the supply chain as well as comments on appropriate responses in cases of falsified medicines.
Walker, Randy M.; Shankar, Mallikarjun; Gorman, Bryan L.
Imagine a world where boxes talk to containers, containers talk to trucks and trucks talk to forklifts that talk to people. Each box would be smart, carrying all the information about its contents, its shipping history, its handling instructions, and where it is supposed to be. This world is within our reach as a result of Web 2.0 innovations on the Internet. While technologies such as RFID, GPS, cellular phones and barcodes have become ever more prevalent in the freight supply chain, there is still an invisible curtain blocking information flow between proprietary and legacy enterprise systems. Researchers at Oak Ridge National Laboratory (ORNL) are working with academia, the U.S. Government, and commercial companies to apply Web 2.0 technologies to the challenge of tracking and monitoring hazardous materials and nuclear sources in the international supply chain. Under the rubric of Tracking 2.0, a term for the use of Web 2.0 technologies for tracking applications, ORNL is developing a prototype called IntelligentFreight. IntelligentFreight interfaces sensors, legacy databases, and proprietary commercial tracking systems. The prototype combines Web 2.0 s social networking and tagging concepts with a classical faceted classification (a way of describing the same object in multiple ways) model to track a shipment across incompatible enterprise systems.
Pochampally, Kishore K.; Gupta, Surendra M.; Gupta, Sushil K.
The designing of a reverse supply chain must involve selection of collection centers and recovery facilities that have sufficient success potentials. These success potentials depend heavily on the participation of the following three important groups who have multiple, conflicting, and incommensurate criteria for evaluation, and so, the potentials must be evaluated based on the maximized consensus among those groups: (i) Consumers (whose primary concern is convenience), (ii) Local government officials (whose primary concern is environmental consciousness), and (iii) Supply chain company executives (whose primary concern is profit). In this paper, we propose a three-phase multi-criteria group approach to select collection centers as well as recovery facilities, of sufficient success potentials. In the first phase of the approach, we identify important criteria for evaluation of the alternatives (collection centers as well as recovery facilities) by each of the above three groups. In the second phase, we give weights to the criteria of each group using the eigen vector method, and then, employ the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) to find the success potential of each alternative, as evaluated by that group. Then, in the third and final phase, we use Borda"s choice rule that, for each alternative, combines individual success potentials into a group success potential.
van der Fels-Klerx, H J; Booij, C J H
This article provides an overview of available systems for management of Fusarium mycotoxins in the cereal grain supply chain, with an emphasis on the use of predictive mathematical modeling. From the state of the art, it proposes future developments in modeling and management and their challenges. Mycotoxin contamination in cereal grain-based feed and food products is currently managed and controlled by good agricultural practices, good manufacturing practices, hazard analysis critical control points, and by checking and more recently by notification systems and predictive mathematical models. Most of the predictive models for Fusarium mycotoxins in cereal grains focus on deoxynivalenol in wheat and aim to help growers make decisions about the application of fungicides during cultivation. Future developments in managing Fusarium mycotoxins should include the linkage between predictive mathematical models and geographical information systems, resulting into region-specific predictions for mycotoxin occurrence. The envisioned geographically oriented decision support system may incorporate various underlying models for specific users' demands and regions and various related databases to feed the particular models with (geographically oriented) input data. Depending on the user requirements, the system selects the best fitting model and available input information. Future research areas include organizing data management in the cereal grain supply chain, developing predictive models for other stakeholders (taking into account the period up to harvest), other Fusarium mycotoxins, and cereal grain types, and understanding the underlying effects of the regional component in the models.
Globalization has created tremendous opportunities, but also made business environment highly competitive and turbulent. To gain competitive advantage, management of present-day transnational firms always seeks options to trim down various transaction and coordination costs, especially in the area of controllable intra-supply chain system. This study investigates a multi–product intra-supply chain system with failure in rework. To achieve maximum machine utilization, multiple products are fabricated in succession on a single machine. During the process, production of some defective items is inevitable. Reworking of nonconforming items is used to reduce the quality cost in production and achieving the goal of lower overall production cost. Because reworks are sometimes unsuccessful, failures in rework are also considered in this study. Finished goods for each product are transported to the sales offices when the entire production lot is quality assured after rework. A multi-delivery policy is used, wherein fixed quantity n installments of the finished lot are transported at fixed intervals during delivery time. The objective is to jointly determine the common production cycle time and the number of deliveries needed to minimize the long–term expected production–inventory–delivery costs for the problem. With the help of a mathematical model along with optimization technique, the optimal production–shipment policy is obtained. We have used a numerical example to demonstrate applicability of the result of our research. PMID:27918588
Chung, Donald; Elgqvist, Emma; Santhanagopalan, Shriram
Manufacturing capacity for lithium-ion batteries (LIBs)--which power many consumer electronics and are increasingly used to power electric vehicles--is heavily concentrated in east Asia. Currently, China, Japan, and Korea collectively host 88% of all LIB cell and 79% of automotive LIB cell manufacturing capacity. Mature supply chains and strong cumulative production experience suggest that most LIB cell production will remain concentrated in Asia. However, other regions--including North America--could be competitive in the growing automotive LIB cell market under certain conditions. To illuminate the factors that drive regional competitiveness in automotive LIB cell production, this study models cell manufacturing cost and minimum sustainable price, and examines development of LIB supply chains and current LIB market conditions. Modeled costs are for large format, 20-Ah stacked pouch cells with lithium-nickel-manganese-cobalt-oxide (NMC) cathodes and graphite anodes suitable for automotive application. Production volume is assumed to be at commercial scale, 600 MWh per year.
Shang, Kuo-Chung; Lu, Chin-Shan; Li, Shaorui
This study investigated crucial green supply chain management (GSCM) capability dimensions and firm performance based on electronics-related manufacturing firms in Taiwan. On the basis of a factor analysis, six green supply chain management dimensions were identified: green manufacturing and packaging, environmental participation, green marketing, green suppliers, green stock, and green eco-design. According to their factor scores in the GSCM dimensions, a cluster analysis subsequently assigned responding firms into four groups, namely, the weak GSCM oriented group, the green marketing oriented group, the green supplier oriented group, and the green stock oriented group. Differences in firm performance and GSCM dimensions among groups were examined. Results indicated that the green marketing oriented group performed best. Based on the resource-based view (RBV), the capability of the green marketing oriented group was considered to be the deployment of a collection of resources that enables it to successfully compete against rivals. The importance of green marketing as a GSCM capability and strategic asset/critical resources for electronics-related manufacturing firms to obtain a competitive edge is therefore highlighted in this study.
De Steur, Hans; Wesana, Joshua; Dora, Manoj K; Pearce, Darian; Gellynck, Xavier
The interest to reduce food losses and wastes has grown considerably in order to guarantee adequate food for the fast growing population. A systematic review was used to show the potential of Value Stream Mapping (VSM) not only to identify and reduce food losses and wastes, but also as a way to establish links with nutrient retention in supply chains. The review compiled literature from 24 studies that applied VSM in the agri-food industry. Primary production, processing, storage, food service and/or consumption were identified as susceptible hotspots for losses and wastes. Results further revealed discarding and nutrient loss, most especially at the processing level, as the main forms of loss/waste in food, which were adapted to four out of seven lean manufacturing wastes (i.e. defect, unnecessary inventory, overproduction and inappropriate processing). This paper presents the state of the art of applying lean manufacturing practices in the agri-food industry by identifying lead time as the most applicable performance indicator. VSM was also found to be compatible with other lean tools such as Just-In-Time and 5S which are continuous improvement strategies, as well as simulation modelling that enhances adoption. In order to ensure successful application of lean practices aimed at minimizing food or nutrient losses and wastes, multi-stakeholder collaboration along the entire food supply chain is indispensable.
Mackey, Tim K; Liang, Bryan A; York, Peter; Kubic, Thomas
Counterfeit medicines are a global public health risk. We assess counterfeit reports involving the legitimate supply chain using 2009-2011 data from the Pharmaceutical Security Institute Counterfeit Incident System (PSI CIS) database that uses both open and nonpublic data sources. Of the 1,510 identified CIS reports involving counterfeits, 27.6% reported China as the source country of the incident/detection. Further, 51.3% were reported as counterfeit but the specific counterfeit subcategory was not known or verifiable. The most prevalent therapeutic category was anti-infectives (21.1%) with most reports originating from health-related government agencies. Geographically, Asian and Latin American regions and, economically, middle-income markets were most represented. A total of 127 (64.8%) of a total of 196 countries had no legitimate supply chain CIS counterfeit reports. Improvements in surveillance, including detection of security breaches, data collection, analysis, and dissemination are urgently needed to address public health needs to combat the global counterfeit medicines trade.
Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy
To maintain a competitive position, companies are increasingly required to integrate their proactive environmental strategies into their business strategies. The shift from reactive and compliance-based to proactive and strategic environmental management has driven companies to consider the strategic factors while identifying the areas in which they should focus their green initiatives. In previous studies little attention was given to providing the managers with a basis from which they could strategically prioritise these green initiatives across their companies' supply chains. Considering this lacuna in the literature, we present a decision-making method for prioritising green supply chain initiatives aligned with the preferred green strategies alternatives for the manufacturing companies. To develop this method, the study considered a position between determinism and the voluntarism orientation of environmental management involving both external pressures and internal competitive drivers and key resources as decision factors. This decision-making method was developed using the analytic network process (ANP) technique. The elements of the decision model were derived from the literature. The causal relationships among the multiple decision variables were validated based on the results of structural equation modelling (SEM) using a dataset collected from a survey of the ISO 14001-certified manufacturers in Malaysia. A portion of the relative weights required for computation in ANP was also calculated using the SEM results. A case study is presented to demonstrate the applicability of the method.
Masoumik, S. Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy
To maintain a competitive position, companies are increasingly required to integrate their proactive environmental strategies into their business strategies. The shift from reactive and compliance-based to proactive and strategic environmental management has driven companies to consider the strategic factors while identifying the areas in which they should focus their green initiatives. In previous studies little attention was given to providing the managers with a basis from which they could strategically prioritise these green initiatives across their companies’ supply chains. Considering this lacuna in the literature, we present a decision-making method for prioritising green supply chain initiatives aligned with the preferred green strategies alternatives for the manufacturing companies. To develop this method, the study considered a position between determinism and the voluntarism orientation of environmental management involving both external pressures and internal competitive drivers and key resources as decision factors. This decision-making method was developed using the analytic network process (ANP) technique. The elements of the decision model were derived from the literature. The causal relationships among the multiple decision variables were validated based on the results of structural equation modelling (SEM) using a dataset collected from a survey of the ISO 14001-certified manufacturers in Malaysia. A portion of the relative weights required for computation in ANP was also calculated using the SEM results. A case study is presented to demonstrate the applicability of the method. PMID:26618353
Yang, Yi; Wang, Shuqing; Liu, Yang
Order insertion often occurs in the scheduling process of logistics service supply chain (LSSC), which disturbs normal time scheduling especially in the environment of mass customization logistics service. This study analyses order similarity coefficient and order insertion operation process and then establishes an order insertion scheduling model of LSSC with service capacity and time factors considered. This model aims to minimize the average unit volume operation cost of logistics service integrator and maximize the average satisfaction degree of functional logistics service providers. In order to verify the viability and effectiveness of our model, a specific example is numerically analyzed. Some interesting conclusions are obtained. First, along with the increase of completion time delay coefficient permitted by customers, the possible inserting order volume first increases and then trends to be stable. Second, supply chain performance reaches the best when the volume of inserting order is equal to the surplus volume of the normal operation capacity in mass service process. Third, the larger the normal operation capacity in mass service process is, the bigger the possible inserting order's volume will be. Moreover, compared to increasing the completion time delay coefficient, improving the normal operation capacity of mass service process is more useful. PMID:25276851
Parfitt, Julian; Barthel, Mark; Macnaughton, Sarah
Food waste in the global food supply chain is reviewed in relation to the prospects for feeding a population of nine billion by 2050. Different definitions of food waste with respect to the complexities of food supply chains (FSCs)are discussed. An international literature review found a dearth of data on food waste and estimates varied widely; those for post-harvest losses of grain in developing countries might be overestimated. As much of the post-harvest loss data for developing countries was collected over 30 years ago, current global losses cannot be quantified. A significant gap exists in the understanding of the food waste implications of the rapid development of ‘BRIC’ economies. The limited data suggest that losses are much higher at the immediate post-harvest stages in developing countries and higher for perishable foods across industrialized and developing economies alike. For affluent economies, post-consumer food waste accounts for the greatest overall losses. To supplement the fragmentary picture and to gain a forward view, interviews were conducted with international FSC experts. The analyses highlighted the scale of the problem, the scope for improved system efficiencies and the challenges of affecting behavioural change to reduce post-consumer waste in affluent populations. PMID:20713403
Han, Guanghua; Dong, Ming; Sun, Qi
This paper studies the trust issue in a two-echelon supply chain information sharing process. In a supply chain, the retailer reports the forecasted demand to the supplier. Traditionally, the supplier's trust in the retailer's reported information is based on the retailer's reputation. However, this paper considers that trust is random and is also affected by the reputation and the demand gap. The supplier and retailer have been shown to have different evaluations regarding the degree of trust. Furthermore, distrust is inherently linked to perceived risk. To mitigate perceived risk, a two-stage decision process with an unpayback deposit contract is proposed. At the first stage, the supplier and the retailer negotiate the deposit contract. At the second stage, a Stackelberg game is used to determine the retailer's reported demand and the supplier's production quantity. We show that the deposits from the retailer's and supplier's perspectives are different. When the retailer's reported demand is equal to the supplier's forecasted demand, the retailer's evaluation of the deposit is more than that of supplier's. When the retailer's reported demand is equal to the retailer's forecasted demand, the deposit from the retailer's perspective is at the lowest level.
The rapid change of the product life cycle is making the parameters of the supply chain models more and more uncertain. Therefore, we consider the coordination mechanisms between one manufacturer and one retailer in a fuzzy decision marking environment, where the parameters of the models can be forecasted and expressed as the triangular fuzzy variables. The centralized decision-making system, two types of supply chain contracts, namely, the revenue sharing contract and the return contract are proposed. To obtain their optimal policies, the fuzzy set theory is adopted to solve these fuzzy models. Finally, three numerical examples are provided to analyze the impacts of the fuzziness of the market demand, retail price and salvage value of the product on the optimal solutions in two contracts. It shows that in order to obtain more fuzzy expected profits the retailer and the manufacturer should seek as low fuzziness of demand, high fuzziness of the retail price and the salvage value as possible in both contracts.
Chiu, Singa Wang; Chen, Shin-Wei; Chang, Chih-Kai; Chiu, Yuan-Shyi Peter
Globalization has created tremendous opportunities, but also made business environment highly competitive and turbulent. To gain competitive advantage, management of present-day transnational firms always seeks options to trim down various transaction and coordination costs, especially in the area of controllable intra-supply chain system. This study investigates a multi-product intra-supply chain system with failure in rework. To achieve maximum machine utilization, multiple products are fabricated in succession on a single machine. During the process, production of some defective items is inevitable. Reworking of nonconforming items is used to reduce the quality cost in production and achieving the goal of lower overall production cost. Because reworks are sometimes unsuccessful, failures in rework are also considered in this study. Finished goods for each product are transported to the sales offices when the entire production lot is quality assured after rework. A multi-delivery policy is used, wherein fixed quantity n installments of the finished lot are transported at fixed intervals during delivery time. The objective is to jointly determine the common production cycle time and the number of deliveries needed to minimize the long-term expected production-inventory-delivery costs for the problem. With the help of a mathematical model along with optimization technique, the optimal production-shipment policy is obtained. We have used a numerical example to demonstrate applicability of the result of our research.
Han, Guanghua; Dong, Ming; Sun, Qi
This paper studies the trust issue in a two-echelon supply chain information sharing process. In a supply chain, the retailer reports the forecasted demand to the supplier. Traditionally, the supplier's trust in the retailer's reported information is based on the retailer's reputation. However, this paper considers that trust is random and is also affected by the reputation and the demand gap. The supplier and retailer have been shown to have different evaluations regarding the degree of trust. Furthermore, distrust is inherently linked to perceived risk. To mitigate perceived risk, a two-stage decision process with an unpayback deposit contract is proposed. At the first stage, the supplier and the retailer negotiate the deposit contract. At the second stage, a Stackelberg game is used to determine the retailer's reported demand and the supplier's production quantity. We show that the deposits from the retailer's and supplier's perspectives are different. When the retailer's reported demand is equal to the supplier's forecasted demand, the retailer's evaluation of the deposit is more than that of supplier's. When the retailer's reported demand is equal to the retailer's forecasted demand, the deposit from the retailer's perspective is at the lowest level. PMID:25054190
Cho, Hyunbo; Kulvatunyou, Boonserm; Jeong, Hanil; Jones, Albert
In today's increasingly competitive global market, most enterprises place high priority on reducing order-fulfillment costs, minimizing time-to-market, and maximizing product quality. The desire of businesses to achieve these goals has seen a shift from a make-to-stock paradigm to a make-to-order paradigm. The success of this new paradigm requires robust and efficient supply chain integration and the ability to operate in the business-to-business (B2B) environment. Recent internet-based approaches have enabled instantaneous and secure information sharing among trading partners (i.e., customers, manufacturers, and suppliers). In this paper, we present a framework that enables both integration and B2B operations. This framework uses pre-defined business process specifications (BPS) and agent technologies. The BPS, which specifies a message choreography among the trading partners, is modeled using a modified Unified Modeling Language (UML). The behavior of the enterprise applications within each trading partner -- how they respond to external events specified in the BPS -- is modeled using Petri-nets and implemented as a collection of agents. The concepts and models proposed in this paper should provide the starting point for the formulation of a structured approach to B2B supply chain integration and implementation.
Parfitt, Julian; Barthel, Mark; Macnaughton, Sarah
Food waste in the global food supply chain is reviewed in relation to the prospects for feeding a population of nine billion by 2050. Different definitions of food waste with respect to the complexities of food supply chains (FSCs)are discussed. An international literature review found a dearth of data on food waste and estimates varied widely; those for post-harvest losses of grain in developing countries might be overestimated. As much of the post-harvest loss data for developing countries was collected over 30 years ago, current global losses cannot be quantified. A significant gap exists in the understanding of the food waste implications of the rapid development of 'BRIC' economies. The limited data suggest that losses are much higher at the immediate post-harvest stages in developing countries and higher for perishable foods across industrialized and developing economies alike. For affluent economies, post-consumer food waste accounts for the greatest overall losses. To supplement the fragmentary picture and to gain a forward view, interviews were conducted with international FSC experts. The analyses highlighted the scale of the problem, the scope for improved system efficiencies and the challenges of affecting behavioural change to reduce post-consumer waste in affluent populations.
Mohajeri, Amir; Fallah, Mohammad
Global warming and climate changes created by large scale emissions of greenhouse gases are a worldwide concern. Due to this, the issue of green supply chain management has received more attention in the last decade. In this study, a closed-loop logistic concept which serves the purposes of recycling, reuse, and recovery required in a green supply chain is applied to integrate the environmental issues into a traditional logistic system. Here, we formulate a comprehensive closed-loop model for the logistics planning considering profitability and ecological goals. In this way, we can achieve the ecological goal reducing the overall amount of CO2 emitted from journeys. Moreover, the profitability criterion can be supported in the cyclic network with the minimum costs and maximum service level. We apply three scenarios and develop problem formulations for each scenario corresponding to the specified regulations and investigate the effect of the regulation on the preferred transport mode and the emissions. To validate the models, some numerical experiments are worked out and a comparative analysis is investigated.
Hu, Yuanchao; Lin, Jianyi; Cui, Shenghui; Khanna, Nina Zheng
A global multiregional input-output (MRIO) model was built for eight Chinese cities to track their carbon flows. For in-depth understanding of urban carbon footprint from the perspectives of production, consumption, and trade balance, four kinds of footprints and four redefined measurement indicators were calculated. From the global supply chain, urban carbon inflows from Mainland China were larger than outflows, while the carbon outflows to European, principal North American countries and East Asia were much larger than inflows. With the rapid urbanization of China, Construction was the largest consumer and Utilities was the largest producer. Cities with higher consumption (such as Dalian, Tianjin, Shanghai, and Beijing) should change their consumption patterns, while cities with lower production efficiency (such as Dalian, Shanghai, Ningbo, and Chongqing) should improve their technology. The cities of net carbon consumption tended to transfer carbon emissions out of them by trading in carbon-intensive products, while the cities of net carbon production tended to produce carbon-intensive products for nonlocal consumers. Our results indicated that urban carbon abatement requires not only rational consumption and industrial symbiosis at the city level, but also tighter collaboration along all stages of the global supply chain.
Fu, Li Fang; Meng, Jun; Liu, Ying
Performance evaluation of supply chain (SC) is a vital topic in SC management and inherently complex problems with multilayered internal linkages and activities of multiple entities. Recently, various Network Data Envelopment Analysis (NDEA) models, which opened the “black box” of conventional DEA, were developed and applied to evaluate the complex SC with a multilayer network structure. However, most of them are input or output oriented models which cannot take into consideration the nonproportional changes of inputs and outputs simultaneously. This paper extends the Slack-based measure (SBM) model to a nonradial, nonoriented network model named as U-NSBM with the presence of undesirable outputs in the SC. A numerical example is presented to demonstrate the applicability of the model in quantifying the efficiency and ranking the supply chain performance. By comparing with the CCR and U-SBM models, it is shown that the proposed model has higher distinguishing ability and gives feasible solution in the presence of undesirable outputs. Meanwhile, it provides more insights for decision makers about the source of inefficiency as well as the guidance to improve the SC performance.
Bruinen de Bruin, Yuri; Hakkinen, Pertti Bert; Lahaniatis, Majlinda; Papameletiou, Demosthenes; Del Pozo, Carlos; Reina, Vittorio; Van Engelen, Jacqueline; Heinemeyer, Gerhard; Viso, Anne Catherine; Rodriguez, Carlos; Jantunen, Matti
This paper analyzes the way risk management measures (RMMs) for consumer products have been used to date in authority and industry risk assessments. A working concept for consumer product RMMs is developed, aimed at controlling, limiting or avoiding exposures, and helping to insure the safe use (or handling) of a substance as part of a consumer product. Particular focus is placed on new requirements introduced by REACH (registration, evaluation, and authorization of chemicals). A RMMs categorization approach is also developed, dividing consumer product RMMs into those that are product integrated and those that are communicated to consumers. For each of these categories, RMMs for normal use, accidental use or misuse need to be distinguished. The level of detail for documenting, assessing and communicating RMMs across supply chains can vary, depending on the type of the assessment (tiered approach). Information on RMMs was collected from published sources to demonstrate that a taxonomical approach using standard descriptors for RMMs libraries is needed for effective information exchange across supply chains.
Agi, Maher A N; Nishant, Rohit
In this study, we establish a set of 19 influential factors on the implementation of Green Supply Chain Management (GSCM) practices and analyse the interaction between these factors and their effect on the implementation of GSCM practices using the Interpretive Structural Modelling (ISM) method and the "Matrice d'Impacts Croisés Multiplication Appliquée à un Classement" (MICMAC) analysis on data compiled from interviews with supply chain (SC) executives based in the Gulf countries (Middle East region). The study reveals a strong influence and driving power of the nature of the relationships between SC partners on the implementation of GSCM practices. We especially found that dependence, trust, and durability of the relationship with SC partners have a very high influence. In addition, the size of the company, the top management commitment, the implementation of quality management and the employees training and education exert a critical influence on the implementation of GSCM practices. Contextual elements such as the industry sector and region and their effect on the prominence of specific factors are also highlighted through our study. Finally, implications for research and practice are discussed.
Alor-Hernandez, Giner; Aguilar-Lasserre, Alberto; Juarez-Martinez, Ulises; Posada-Gomez, Ruben; Cortes-Robles, Guillermo; Garcia-Martinez, Mario Alberto; Gomez-Berbis, Juan Miguel; Rodriguez-Gonzalez, Alejandro
The Service-Oriented Architecture (SOA) development paradigm has emerged to improve the critical issues of creating, modifying and extending solutions for business processes integration, incorporating process automation and automated exchange of information between organizations. Web services technology follows the SOA's principles for developing and deploying applications. Besides, Web services are considered as the platform for SOA, for both intra- and inter-enterprise communication. However, an SOA does not incorporate information about occurring events into business processes, which are the main features of supply chain management. These events and information delivery are addressed in an Event-Driven Architecture (EDA). Taking this into account, we propose a middleware-oriented integrated architecture that offers a brokering service for the procurement of products in a Supply Chain Management (SCM) scenario. As salient contributions, our system provides a hybrid architecture combining features of both SOA and EDA and a set of mechanisms for business processes pattern management, monitoring based on UML sequence diagrams, Web services-based management, event publish/subscription and reliable messaging service.
Liu, Weihua; Yang, Yi; Wang, Shuqing; Liu, Yang
Order insertion often occurs in the scheduling process of logistics service supply chain (LSSC), which disturbs normal time scheduling especially in the environment of mass customization logistics service. This study analyses order similarity coefficient and order insertion operation process and then establishes an order insertion scheduling model of LSSC with service capacity and time factors considered. This model aims to minimize the average unit volume operation cost of logistics service integrator and maximize the average satisfaction degree of functional logistics service providers. In order to verify the viability and effectiveness of our model, a specific example is numerically analyzed. Some interesting conclusions are obtained. First, along with the increase of completion time delay coefficient permitted by customers, the possible inserting order volume first increases and then trends to be stable. Second, supply chain performance reaches the best when the volume of inserting order is equal to the surplus volume of the normal operation capacity in mass service process. Third, the larger the normal operation capacity in mass service process is, the bigger the possible inserting order's volume will be. Moreover, compared to increasing the completion time delay coefficient, improving the normal operation capacity of mass service process is more useful.
Boutkhoum, Omar; Hanine, Mohamed; Boukhriss, Hicham; Agouti, Tarik; Tikniouine, Abdessadek
At present, environmental issues become real critical barriers for many supply chain corporations concerning the sustainability of their businesses. In this context, several studies have been proposed from both academia and industry trying to develop new measurements related to green supply chain management (GSCM) practices to overcome these barriers, which will help create new environmental strategies, implementing those practices in their manufacturing processes. The objective of this study is to present the technical and analytical contribution that multi-criteria decision making analysis (MCDA) can bring to environmental decision making problems, and especially to GSCM field. For this reason, a multi-criteria decision-making methodology, combining fuzzy analytical hierarchy process and fuzzy technique for order preference by similarity to ideal solution (fuzzy TOPSIS), is proposed to contribute to a better understanding of new sustainable strategies through the identification and evaluation of the most appropriate GSCM practices to be adopted by industrial organizations. The fuzzy AHP process is used to construct hierarchies of the influential criteria, and then identify the importance weights of the selected criteria, while the fuzzy TOPSIS process employs these weighted criteria as inputs to evaluate and measure the performance of each alternative. To illustrate the effectiveness and performance of our MCDA approach, we have applied it to a chemical industry corporation located in Safi, Morocco.
Nagurney, Ladimer; Nagurney, Anna
Technetium-99m, produced from the decay of Molybdenum-99, is the most commonly used radioisotope for medical imaging, specifically in cardiac and cancer diagnostics. The MO-99 is produced in a small number of reactors and is processed and distributed worldwide. We have developed a tractable network model and computational approach for the design and redesign of the MO-99 supply chains. This topic is of special relevance to medical physics given the product's widespread use and the aging of the nuclear reactors where it is produced. This generalized network model, for which we derived formulae for the arc and path multipliers that capture the underlying physics of radioisotope decay, includes total operational cost minimization, and the minimization of cost associated with nuclear waste disposal, coupled with capacity investment (or disinvestment) costs. Its solution yields the optimal link capacities as well as the optimal MO-99 flows so that demand at the medical facilities is satisfied. We illustrate the framework with a Western Hemisphere case study. The framework provides the foundation for further empirical research and the basis for the modeling and analysis of supply chain networks for other very time-sensitive medical products.
The automotive supply chain and its management can be a very complex process and comprises a long dynamic and complex network that consists of four primary segments: original equipment manufacturers (OEMs), first tier suppliers, sub tiers suppliers, and infrastructure suppliers. During the analysis of the current automotive industry it was identified that textile industry importance is considerable increasing as a part of the global automotive supply chain, because textile products are used for interior, exterior and even suspension parts and components. Automotive industry has an increasing demand for higher quality exterior panels with better functional properties and reduced weight. One of the main potentials for this demand is based on the three-dimensional woven composites technology innovations which can replace an existing technology. The new role of the textile industry could make important changes in the automotive supply chain industry, such as: changes in the size of the supply chain, the time to the market and the position of textile industry in the automotive supply chain structure. 3D composite materials from high performance fibers, such as glass and carbon, have been used for automotive applications in a limited way due to the low production rate and the lack of research and development. This research will contribute to the understanding of textile composites in transportation and the textile parameters that affect the performance characteristics of these materials. The research examines the performance characteristics of lighter and stronger 3D woven fabric composites made from fiberglass with the aim to improve fuel efficiency by reducing the total vehicle weight while maintaining safety standards. The performance characteristics of the 3D woven fabric composite can be designed by changing different construction parameters, such as picks density, pick roving linear density, arrangements of warp and z-yarns, and the number of warp and picks layers
Sprecher, Benjamin; Daigo, Ichiro; Murakami, Shinsuke; Kleijn, Rene; Vos, Matthijs; Kramer, Gert Jan
In 2010, Chinese export restrictions caused the price of the rare earth element neodymium to increase by a factor of 10, only to return to almost normal levels in the following months. This despite the fact that the restrictions were not lifted. The significant price peak shows that this material supply chain was only weakly resistant to a major supply disruption. However, the fact that prices rapidly returned to lower levels implies a certain resilience. With the help of a novel approach, based on resilience theory combined with a material flow analysis (MFA) based representation of the neodymium magnet (NdFeB) supply chain, we show that supply chain resilience is composed of various mechanisms, including (a) resistance, (b) rapidity, and (c) flexibility, that originate from different parts of the supply chain. We make recommendations to improve the capacity of the NdFeB system to deal with future disruptions and discuss potential generalities for the resilience of other material supply chains.
Valles Sosa, Claudia Evangelina
respond to these new challenges, the Modified Multiple Objective Evolutionary Algorithm for the design optimization of a biomass to bio-refinery logistic system that considers the simultaneous maximization of the total profit and the minimization of three environmental impacts is presented. Sustainability balances economic, social and environmental goals and objectives. There exist several works in the literature that have considered economic and environmental objectives for the presented supply chain problem. However, there is a lack of research performed in the social aspect of a sustainable logistics system. This work proposes a methodology to integrate social aspect assessment, based on employment creation. Finally, most of the assessment methodologies considered in the literature only contemplate deterministic values, when in realistic situations uncertainties in the supply chain are present. In this work, Value-at-Risk, an advanced risk measure commonly used in portfolio optimization is included to consider the uncertainties in biofuel prices, among the others.
Since 1990, the Department of Defense’s (DOD) supply chain management processes have been on GAO’s list of high-risk areas needing urgent attention... supply chain management from the list. DOD’s plan focuses on three areas for improvement: accuracy of supply requirements forecasts, distribution of...material, and asset visibility. GAO was asked to provide its views on (1) the importance of supply chain management in DOD, (2) why GAO listed it as a high
Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig
This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily “continuous processing”-based supply chain. The current predominantly “large batch” and centralized manufacturing system designed for the “blockbuster” drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more “flow-through” operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current
Srai, Jagjit Singh; Badman, Clive; Krumme, Markus; Futran, Mauricio; Johnston, Craig
This paper examines the opportunities and challenges facing the pharmaceutical industry in moving to a primarily "continuous processing"-based supply chain. The current predominantly "large batch" and centralized manufacturing system designed for the "blockbuster" drug has driven a slow-paced, inventory heavy operating model that is increasingly regarded as inflexible and unsustainable. Indeed, new markets and the rapidly evolving technology landscape will drive more product variety, shorter product life-cycles, and smaller drug volumes, which will exacerbate an already unsustainable economic model. Future supply chains will be required to enhance affordability and availability for patients and healthcare providers alike despite the increased product complexity. In this more challenging supply scenario, we examine the potential for a more pull driven, near real-time demand-based supply chain, utilizing continuous processing where appropriate as a key element of a more "flow-through" operating model. In this discussion paper on future supply chain models underpinned by developments in the continuous manufacture of pharmaceuticals, we have set out; The significant opportunities to moving to a supply chain flow-through operating model, with substantial opportunities in inventory reduction, lead-time to patient, and radically different product assurance/stability regimes. Scenarios for decentralized production models producing a greater variety of products with enhanced volume flexibility. Production, supply, and value chain footprints that are radically different from today's monolithic and centralized batch manufacturing operations. Clinical trial and drug product development cost savings that support more rapid scale-up and market entry models with early involvement of SC designers within New Product Development. The major supply chain and industrial transformational challenges that need to be addressed. The paper recognizes that although current batch operational
Jernigan, D H
Development sociology has used global commodity chains as one way of analyzing the dynamics of power and profit-taking in globalized production networks made up of multiple firms and occurring in multiple national settings. A substantial portion of the alcohol supply in developing countries is now produced through such production networks. Particularly in the beer and spirits trade, a small number of transnational firms control networks of local producers, importers, advertisers and distributors. These networks serve to embed transnational or transnationally backed brands in the local culture, using the tools of market research, product design and marketing to influence local drinking practices. Case materials from Malaysia's beer industry help to illustrate how the transnational firms dominate in those links of the commodity chain in which monopoly or oligopoly control is most likely to be found: the design/recipe and marketing/advertising nodes. Their control of the commodity chains and extraction of monopoly or oligopoly profits from them places substantial resources and influence over drinking settings and practices in foreign hands. The impact of this influence on state efficacy and autonomy in setting alcohol policy is an important subject for future research on the creation and implementation of effective alcohol policies in developing societies.
Biju, Soly Mathew
Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…