Science.gov

Sample records for agreement crada effort

  1. Agreement Execution Process Study: CRADAs and NF-WFO Agreements and the Speed of Business

    SciTech Connect

    Harrer, Bruce J.; Cejka, Cheryl L.; Macklin, Richard; Miksovic, Ann

    2011-02-01

    This report summarizes the findings of a study on the execution of Cooperative Research and Development Agreements (CRADAs) and Non-Federal Work for Others (NF-WFO) agreements across the U.S. Department of Energy (DOE) laboratory complex. The study provides quantitiative estimates of times required to negotiate and execute these agreements across the DOE complex. It identifies factors impacting on cycle times and describes best practicies used at various laboratories and site offices that reduce cycle times.

  2. 77 FR 48165 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of Homeland Security for the Efficacy Testing of Vaporous Hydrogen Peroxide (VHP) and Chlorine Dioxide (ClO 2 )...

  3. METC/Shell Cooperative Agreement CRADA 93-011 high temperature high pressure filtration and sorbent test program. Volume 1, Final report

    SciTech Connect

    1995-06-01

    In conjunction with shakedown, operation, and desulfurization testing at the Morgantown Energy Technology Center (METC) 10 in. Fluid Bed Gasification and Cleanup facility, a series of tests was completed in cooperatation with Shell Synthetic Fuels, Incorporated to obtain data relevent to the design and operation of dry particulate solids filters, and Nahcolite as a chloride removal sorbent. Shell Synthetic Fuels Incorporated provided 60 mm O.D. {times} 40 mm I.D. {times} O.5 m long silicon carbide, LayCer{trademark} 70/3 candle filters for use in filtering coal gas from the METC gasifier. METC installed the filters in a vessel existing in the METC Cleanup Facility and provided process data in exchange for ceramic filter and ash/char characterization. Details of the cooperative research and development agreement (CRADA) are found in CRADA 93-011. This report contains METC`s contribution to CRADA 93-011. Seven gasifier runs were conducted over an eighteen month period to accumulate 868 hours of operation. During this time, 3 filters were used 2 at a time to give individual candle usage of 254 hours, 525 hours, and 868 hours, respectively. During one 89 hour test, one Laycer 70/3 candle was installed with a 3M ceramic composite filter. The face velocity through the candles was maintained nominally at 2.5 ft/min throughout the testing.

  4. METC/3M Cooperative Agreement CRADA 94-024 high temperature high pressure filter materials exposure test program. Volume 1, Final report

    SciTech Connect

    1995-06-01

    In conjunction with shakedown, operation, and desulfurization testing at the Morgantown Energy Technology Center (METC) 10 in. Fluid Bed Gasification and Cleanup facility, a series of tests was completed in cooperation with the Minnesota Mining and Manufacturing Company (3M). This cooperative research and development agreement (CRADA) between METC and 3M was to evaluate exposure of 3M SICONEX{trademark} fiber-reinforced ceramic and NEXTEL{trademark} 312 and 550 ceramic fabric materials to a gasifying environment at high temperatures (1000--1100{degree}F) and high pressure (300 psia). Minnesota Mining and Manufacturing Company (3M) provided two 60 mm I.D. {times} 0.5 m SICONEX{trademark} spools and one each of the NEXTEL{trademark} 312 and 550 ceramic fabrics for exposure to coal gas from the METC gasifier. METC installed the materials in a vessel existing in the METC Cleanup Facility and provided process data in exchange for ceramic filter and ash/char characterization. Details of the CRADA are found in CRADA 94-024. This report contains METC`s contribution to CRADA 94-024. Four gasifier runs were conducted over a five month period to accumulate 483 hours of operation. During this time, 2 LayCer{trademark} 70/3 filters were used for filtering the coal gas while the SICONEX{trademark} and NEXTEL{trademark} were exposed along side of the filters. During one 89 hour test, one Laycer{trademark} 70/3 candle was installed with a 3M ceramic composite filter. The face velocity through the candles was maintained nominally at 2.5 ft/min throughout the testing.

  5. Master Settlement Agreement (MSA) Spending and Tobacco Control Efforts

    PubMed Central

    Jayawardhana, Jayani; Bradford, W. David; Jones, Walter; Nietert, Paul J.; Silvestri, Gerard

    2014-01-01

    We investigate whether the distributions to the states from the Tobacco Master Settlement Agreement (MSA) in 1998 is associated with stronger tobacco control efforts. We use state level data from 50 states and the District of Columbia from four time periods post MSA (1999, 2002, 2004, and 2006) for the analysis. Using fixed effect regression models, we estimate the relationship between MSA disbursements and a new aggregate measure of strength of state tobacco control known as the Strength of Tobacco Control (SoTC) Index. Results show an increase of $1 in the annual per capita MSA disbursement to a state is associated with a decrease of −0.316 in the SoTC mean value, indicating higher MSA payments were associated with weaker tobacco control measures within states. In order to achieve the initial objectives of the MSA payments, policy makers should focus on utilizing MSA payments strictly on tobacco control activities across states. PMID:25506827

  6. Brandon Research, Inc. Orthopedic Implant Cooperative Research and Development Agreement (CRADA) Final Report

    SciTech Connect

    Freeman, W.R.

    1999-04-22

    The project was a joint research effort between the U. S. Department of Energy's (DOE) Kansas City Plant (KCP) and Brandon Research, Inc. to develop ways to improve implants used for orthopedic surgery for joint replacement. The primary product produced by this study is design information, which may be used to develop implants that will improve long-term fixation and durability in the host bone environment.

  7. Development of a metal ceramic composite crucible. Final CRADA report for CRADA number Y-1292-0079

    SciTech Connect

    Morrow, M.S.; Holcombe, C.E. Jr.; Kiggans, J.O. Jr.; Rexford, D.; Rausch, J.J.

    1995-09-30

    This Cooperative Research and Development Agreement (CRADA) has been a three-year collaboration among the Y-12 Plant Development Division, Blasch Precision Ceramics, Inc., and Surface Alloys, Inc. The purpose of the CRADA was to evaluate the production of a totally new crucible that would be noncarbon and that could perform like graphite. The effort required materials fabricated into a workable crucible. The goal was to produce a crucible that could be induction heated and allow melting of reactive metals without appreciable carbon contamination. The US Department of Energy programs involving casting uranium and its alloys have long been concerned with reducing deleterious carbon pickup that results from the use of graphite crucibles. Therefore, the results of this CRADA provide an alternative that can eliminate carbon pickup from the graphite crucible.

  8. Application of a Barrier Filter at a High Purity Synthetic Graphite Plant, CRADA 99-F035, Final Report

    SciTech Connect

    National Energy Technology Laboratory

    2000-08-31

    Superior Graphite Company and the US Department of Energy have entered into a Cooperative Research and Development Agreement (CRADA) to study the application of ceramic barrier filters at its Hopkinsville, Kentucky graphite plant. Superior Graphite Company is a worldwide leader in the application of advanced thermal processing technology to produce high purity graphite and carbons. The objective of the CRADA is to determine the technical and economic feasibility of incorporating the use of high-temperature filters to improve the performance of the offgas treatment system. A conceptual design was developed incorporating the ceramic filters into the offgas treatment system to be used for the development of a capital cost estimate and economic feasibility assessment of this technology for improving particulate removal. This CRADA is a joint effort of Superior Graphite Company, Parsons Infrastructure and Technology Group, and the National Energy Technology Laboratory (NETL) of the US Department of Energy (DOE).

  9. Surface Inspection Machine Infrared (SIMIR). Final CRADA report

    SciTech Connect

    Powell, G.L.; Neu, J.T.; Beecroft, M.

    1997-02-28

    This Cooperative Research and Development Agreement was a one year effort to make the surface inspection machine based on diffuse reflectance infrared spectroscopy (Surface Inspection Machine-Infrared, SIMIR), being developed by Surface Optics Corporation, perform to its highest potential as a practical, portable surface inspection machine. The design function of the SIMIR is to inspect metal surfaces for cleanliness (stains). The system is also capable of evaluating graphite-resin systems for cure and heat damage, and for measuring the effects of moisture exposure on lithium hydride, corrosion on uranium metal, and the constituents of and contamination on wood, paper, and fabrics. Over the period of the CRADA, extensive experience with the use of the SIMIR for surface cleanliness measurements have been achieved through collaborations with NASA and the Army. The SIMIR was made available to the AMTEX CRADA for Finish on Yarn where it made a very significant contribution. The SIMIR was the foundation of a Forest Products CRADA that was developed over the time interval of this CRADA. Surface Optics Corporation and the SIMIR have been introduced to the chemical spectroscopy on-line analysis market and have made staffing additions and arrangements for international marketing of the SIMIR as an on-line surface inspection device. LMES has been introduced to a wide range of aerospace applications, the research and fabrication skills of Surface Optics Corporation, has gained extensive experience in the areas of surface cleanliness from collaborations with NASA and the Army, and an extensive introduction to the textile and forest products industries. The SIMIR, marketed as the SOC-400, has filled an important new technology need in the DOE-DP Enhanced Surveillance Program with instruments delivered to or on order by LMES, LANL, LLNL, and Pantex, where extensive collaborations are underway to implement and improve this technology.

  10. METC/3M Cooperative Agreement CRADA 94-024 high temperature high pressure filter materials exposure test program. Volume 2, Final report

    SciTech Connect

    1995-06-01

    This report is a summary of the results of activities of the particulate monitoring group in support of the METC/3M CRADA 94024. Online particulate monitoring began in June 1994 and ended in October, 1994. The particulate monitoring group participated in four MGCR runs (No. 7 through No. 10). The instrument used in measuring the particle loadings (particle counts and size distribution) is the Particle Measuring Systems Classical Scattering Aerosol Spectrometer Probe High Temperature and High Pressure (PMS Model CSASP-100-HTHP). This PMS unit is rated to operate at temperatures up to 540{degree}C and gage pressures up to 2.0 MPa. Gas stream conditions, temperature at 540{degree}C, gage pressure at 2.93 MPa, and gas flowrate at 0.0157 SCM per second, precluded the direct measurement of particulate loadings in the gas stream with the PMS unit. A side stream was extracted from the gas stream after it came over to the MGCR, Modular Gas Cleanup Rig, from the FBG, pressurized Fluidized-Bed Gasifier, but before it entered the filter testing vessel. A sampling probe of 0.635 cm O.D. thin wall stainless steel tubing was used for extracting the sample gas isokinetically based on the expected flowrate. The sample gas stream was further split into two streams; one was directed to the PMS unit and the other to the alkali monitor unit. The alkali monitor unit was not used during runs No. 7 through No. 10.

  11. METC/Shell Cooperative Agreement CRADA 93-011 high temperature high pressure filtration and sorbent test program. Volume 2, Final report

    SciTech Connect

    1995-06-01

    This report is a summary of the results of activities of the particulate monitoring group in support of the METC/Shell CRADA 93-011. Online particulate monitoring began in August 1993 and ended in October 1994. The particulate monitoring group participated in six MGCR runs (No. 5 through No. 10). The instrument used in measuring the particle loadings (particle counts and size distribution) is the Particle Measuring Systems Classical Scattering Aerosol Spectrometer Probe High Temperature and High Pressure (PMS Model CSASP-100-HTHP). This PMS unit is rated to operate at temperatures up to 540{degree}C and gage pressures up to 2.07 MPa. Gas stream conditions, temperature at 540{degree}C, gage pressure at 2.93 MPa, and gas flowrate at 0.0157 SCM per second, precluded the direct measurement of particulate loadings in the gas stream with the PMS unit. A side stream was extracted from the gas stream after it came over to the MGCR, (Modular Gas Cleanup Rig), from the FBG, pressurized fluidized-bed gasifier, but before it entered the filter testing vessel. A sampling probe of 0.635 cm O.D. thin wall stainless steel tubing was used for extracting the sample gas isokinetically based on the expected flowrate. The sample gas stream was further split into two streams; one was directed to the PMS unit and the other to the alkali monitor unit.

  12. CRADAs: They're Not Just for NCI Anymore | Poster

    Cancer.gov

    By Karen Surabian, Thomas Stackhouse, and Jeffrey Thomas, Contributing Writers, and Bruce Crise, Guest Writer Advancing scientific discovery is increasingly dependent on diverse and innovative partnerships, and the Cooperative Research and Development Agreement (CRADA) is an essential tool for establishing partnerships. CRADAs allow a federal laboratory to enter into collaborative research and development (R&D) projects with outside parties (commercial or nonprofit).

  13. Machining and inspection of structural ceramic components. CRADA final report for CRADA number Y-1292-0078

    SciTech Connect

    Counts, R.W.; Albright, S.; Ritland, M.

    1996-09-30

    This document is the final report of the Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc. (Energy Systems) and the Coors Ceramics Company (Coors). The purpose of this CRADA was to develop advanced technology and manufacturing practices for machining and inspecting ceramic components. Specific CRADA objectives were accomplished through the completion of six projects at four separate Coors facilities. The projects included the development of an analytical model to simulate the mechanics of a powder rolling process, development and testing of a microwave-based system for measuring the density of conveyed ceramic material, and the development and testing of four machine vision inspection systems. This CRADA benefited the U.S. Department of Energy (DOE) activities associated with advanced heat engines, enhanced critical manufacturing skills within the DOE complex for fabricating precision, high quality workpieces from difficult-to-machine materials, and enabled U.S. industry to maintain a position of leadership in the structural ceramics field.

  14. Phase I ResonantSonic CRADA report

    SciTech Connect

    Richterich, L.R.; Amos, L.O.; Fancher, J.D.; McLellan, G.W.; Setzer, W.V.; Tuttle, B.G.; Hockey, R.L.; Ferris, R.H.; Riechers, D.M.; Pitman, S.G.

    1994-03-28

    This test report describes the Phase 1 testing and results of the ResonantSonic drilling method. This effort was conducted as part of a Cooperative Research and Development Agreement (CRADA) between the US Department of Energy, Pacific Northwest Laboratory, Westinghouse Hanford Company and Water Development Corporation. The purpose of this demonstration was to evaluate the Water Development Corporation`s ResonantSonic drilling system, modify components as necessary and determine compatible drilling applications for the ResonantSonic drilling method for use at facilities in the DOE complex and private industry. Initially, the ResonantSonic drill was used to drill several test holes at the Drilling Technology Test Site to assess the feasibility of drilling vertical and angle holes. After this initial phase, a 45 degree angle vapor extraction well was drilled to a depth of 168 feet at the 200 West Carbon Tetrachloride Site. This well was drilled and completed in nine days. Extensive geologic and vapor sampling were conducted while drilling this well. In addition, testing was also conducted at the test site to evaluated drilling with larger diameter casing (8 5/8 inch). Evaluation of the Resonant Sonic drilling method will be continued during the Phase 2 portion of testing to determine if improvements to the ResonantSonic system will make it a more viable method for drilling and sampling.

  15. Final Report for CRADA Agreement , AL-C-2006-01 with Microsens Biotechnologies: Detection of the Abnormal Prion Protein in Blood by Improving the Extraction of this Protein

    SciTech Connect

    Schmerr, Mary Jo

    2009-03-31

    Several conditions were examined to optimize the extraction protocol using Seprion beads for the abnormal prion protein. Different combinations of water, hexafluro-2-propanol and formic acid were used. The results of these extraction protocols showed that the magnetic beads coated with Seprion reagents were subject to degradation, themselves, when the extraction conditions that would solubilize the abnormal prion protein were used. These compounds caused interference in the immunoassay for the abnormal prion protein and rendered these protocols incompatible with the assay systems. In an attempt to overcome this problem, another approach was then used. The coated beads were used as an integral part of the assay platform. After washing away denaturing agents, the beads with the 'captured' abnormal prion were incubated directly in the immunoassay, followed by analysis by the capillary electrophoresis. When a capillary electrophoresis electro-kinetic separation was attempted, the beads disturbed the analysis making it impossible to interpret. A pressure separation method was then developed for capillary electrophoresis analysis. When 20 samples, 5 of which were positive were analyzed, the assay identified 4 of the 5 positives and had no false positives. When a larger number of samples were analyzed the results were not as good - there were false positives and false negatives. It was then observed that the amount of beads that were loaded was dependent upon how long the beads were allowed to settle before loading them into the capillary. This resulted in unacceptable variations in the results and explained that when large numbers of samples were evaluated the results were not consistent. Because the technical difficulties with using the Seprion beads could not be overcome at this time, another approach is underway that is outside of the scope of this CRADA. No further agreements have been developed. Because the results were not favorable, no manuscripts were written nor

  16. CRADA Final Report for CRADA Number NFE-10-02991 "Development and Commercialization of Alternative Carbon Precursors and Conversion Technologies"

    SciTech Connect

    Norris, Rober; Paulauskas, Felix; Naskar, Amit; Kaufman, Michael; Yarborough, Ken; Derstine, Chris

    2013-10-01

    The overall objective of the collaborative research performed by the Oak Ridge National Laboratory (ORNL) and the Dow Chemical Company under this Cooperative Research And Development Agreement (CRADA NFE-10-02991) was to develop and establish pathways to commercialize new carbon fiber precursor and conversion technology. This technology is to produce alternative polymer fiber precursor formulations as well as scaled energy-efficient advanced conversion technology to enable continuous mode conversion to obtain carbonized fibers that are technically and economically viable in industrial markets such as transportation, wind energy, infrastructure and oil drilling applications. There have been efforts in the past to produce a low cost carbon fiber. These attempts have to be interpreted against the backdrop of the market needs at the time, which were strictly military aircraft and high-end aerospace components. In fact, manufacturing costs have been reduced from those days to current practice, where both process optimization and volume production have enabled carbon fiber to become available at prices below $20/lb. However, the requirements of the lucrative aerospace market limits further price reductions from current practice. This approach is different because specific industrial applications are targeted, most specifically wind turbine blade and light vehicle transportation, where aircraft grade carbon fiber is not required. As a result, researchers are free to adjust both manufacturing process and precursor chemistry to meet the relaxed physical specifications at a lower cost. This report documents the approach and findings of this cooperative research in alternative precursors and advanced conversion for production of cost-effective carbon fiber for energy missions. Due to export control, proprietary restrictions, and CRADA protected data considerations, specific design details and processing parameters are not included in this report.

  17. Jupiter Oxygen Corporation/Albany Research Center Crada Progress Report, September

    SciTech Connect

    Turner, Paul C.; Schoenfield, Mark

    2004-09-13

    The Albany Research Center (ARC) has developed a new Integrated Pollutant Removal (IPR) process for fossil-fueled boilers. Pursuant to a cooperative research and development agreement (CRADA) with Jupiter Oxygen Corporation, ARC currently is studying the IPR process as applied to the oxygen fuel technology developed by Jupiter. As discussed further below, these two new technologies are complementary. This interim report summarizes the study results to date and outlines the potential activities under the next phase of the CRADA with Jupiter.

  18. Science and Technology Development for Renewable Energy Applications: Cooperative Research and Development Final Report, CRADA Number CRD-03-00122

    SciTech Connect

    Musial, W.

    2010-07-01

    This CRADA PTS is a vital element of a larger GE effort to design and build higher-power next-generation wind turbine generators with a cost of energy production competitive or less than conventional fuel-based generation.

  19. SWAY/NREL Collaboration on Offshore Wind System Testing and Analysis: Cooperative Research and Development Final Report, CRADA Number CRD-11-459

    SciTech Connect

    Robertson, Amy

    2015-02-01

    This shared resources CRADA defines collaborations between the National Renewable Energy Laboratory and SWAY. Under the terms and conditions described in this CRADA agreement, NREL and SWAY will collaborate on the SWAY 1/5th-scale floating wind turbine demonstration project in Norway. NREL and SWAY will work together to obtain measurement data from the demonstration system to perform model validation.

  20. Final Report for CRADA No. 97-F001

    SciTech Connect

    National Energy Technology Laboratory; The Foster Wheeler Development Corporation

    2000-10-31

    This report documents the results of work conducted under the Cooperative Research And Development (CRADA) No. 97-F001 between the Foster Wheeler Development Corporation, FWDC, and the National Energy Technology Laboratory, NETL. Under this agreement, FWDC and NETL worked together to further investigate the applicability of the MFIX computer code to FWDC engineering problems. MFIX is a transient, finite difference, FORTRAN code that solves the equations of transport for interacting fluid and granular solid phases. It is designed to model fluidized bed reactors. Under the CRADA, work was divided into three tasks. The first task involved the continued validation of the hydrodynamic and chemistry capabilities of the MFIX code. The second task involved a parametric evaluation of the MFIX code's ability to predict bubble shape. Task 3 was to modify MFIX to make it execute faster and more easily on personal computers. Task 1 was accomplished by both FWDC and NETL while Tasks 2 and 3 were completed primarily by NETL. Non technical details of the CRADA can be found in Appendix A.

  1. Cost effective machining and inspection of structural ceramic components for advanced high temperature application. Final CRADA report for CRADA number Y-1292-0151

    SciTech Connect

    Abbatiello, L.A.; Haselkorn, M.

    1996-11-29

    This Cooperative Research and Development Agreement (CRADA) was a mutual research and development (R and D) effort among the participants to investigate a range of advanced manufacturing technologies for two silicon nitride (Si{sub 3}N{sub 4}) ceramic materials. The general objective was to identify the most cost-effective part manufacturing processes for the ceramic materials of interest. The focus was determining the relationship between material removal rates, surface quality, and the structural characteristics of each ceramic resulting from three innovative processes. These innovated machining processes were studied using silicon nitride advanced materials. The particular (Si{sub 3}N{sub 4}) materials of interest were sintered GS-44 from the Norton Company, and reaction-bonded Ceraloy 147-3. The processes studied included the following activities: (1) direct laser machining; (2) rotary ultrasonic machining; and (3) diamond abrasive grinding, including both resinoid and vitreous-bonded grinding wheels. Both friable and non-friable diamond types were included within the abrasive grinding study. The task also conducted a comprehensive survey of European experience in use of ceramic materials, principally aluminum oxide. Originally, the effort of this task was to extend through a prototype manufacturing demonstration of selected engine components. During the execution of this program, however changes were made to the scope of the project, altering the goals. The Program goal became only the development of assessment of their impacts on product strength and surface condition.

  2. Follow-On Cooperative Research and Development Agreement: MFIX to FLUENT Technology Transfer and Validation Studies Final Report

    SciTech Connect

    Madhava Syamlal; Guenther, Chris; O'Brien, Thomas J.; Benyahia, Sofiane; Shi, Shaoping

    2005-03-01

    This report summarizes the effort by NETL and Fluent on the Cooperative Research and Development Agreement No. 00-F039 signed in May 2000. The objective of the CRADA was to transfer technology from NETL's MFIX code into the commercial software FLUENT so as to increase the computational speed, accuracy, and utility of FLUENT. During the period of this CRADA MFIX was used to develop granular flow theories and used for simulating gas-solids chemical reactors. The FLUENT and MFIX predictions were compared with each other and with experimental data generated at NETL. The granular kinetic theory in FLUENT was improved as a result of this work, and a gas-solids reaction (ozone decomposition) was used as a test case for the gas-solids chemical reaction capability in FLUENT. Also, under a separate project, work has begun to transfer the coal combustion and gasification model in MFIX to FLUENT.

  3. Advanced technology and manufacturing practices for machining and inspecting metal matrix composites. Final CRADA report for CRADA number Y-1292-0092

    SciTech Connect

    Fell, H.A.; Shelton, J.E.; LaMance, G.M.; Kennedy, C.R.

    1995-02-26

    Lockheed Martin Energy Systems, Inc. (Energy Systems) and the Lanxide Corporation (Lanxide) negotiated a Cooperative Research and Development Agreement (CRADA) to develop advanced technology and manufacturing practices for machining and inspecting metal matrix composites (MMC). The objective of this CRADA was to develop machining parameters to allow manufacturing of automotive components from MMCs. These parts exhibit a range of shapes and dimensional tolerances and require a large number of machining operations. The common characteristic of the components is the use of the light weight MMC materials to replace heavier materials. This allows smaller and lighter moving parts and supporting structural components thereby increasing fuel mileage. The CRADA was divided into three areas: basic investigation of cutting parameters, establishment of a mock production line for components, and optimization of parameters in the mock facility. This report covers the manufacturing of MMCs and preliminary Phase I testing for silicon carbide having various loading percentages and extensive Phase I testing of cutting parameters on 30% alumina loaded aluminum. On January 26, 1995, a letter from the vice president, technology at Lanxide was issued terminating the CRADA due to changes in business. 9 refs., 18 figs., 3 tabs.

  4. Proximity sensor system development. CRADA final report

    SciTech Connect

    Haley, D.C.; Pigoski, T.M.

    1998-01-01

    Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors.

  5. Composite material fabrication techniques. CRADA final report

    SciTech Connect

    Frame, B J; Paulauskas, F L; Miller, J; Parzych, W

    1996-09-30

    This report describes a low cost method of fabricating components for mockups and training simulators used in the transportation industry. This technology was developed jointly by the Oak Ridge National Laboratory (ORNL) and Metters Industries, Incorporated (MI) as part of a Cooperative Research and Development Agreement (CRADA) ORNL94-0288 sponsored by the Department of Energy (DOE) Office of Economic Impace and Diversity Minority Business Technology Transfer Consortium. The technology involves fabricating component replicas from fiberglass/epoxy composites using a resin transfer molding (RTM) process. The original components are used as masters to fabricate the molds. The molding process yields parts that duplicate the significant dimensional requirements of the original component while still parts that duplicate the significant dimensional requirements of the original component while still providing adequate strength and stiffness for use in training simulators. This technology permits MI to overcome an acute shortage in surplus military hardware available to them for use in manufacturing training simulators. In addition, the cost of the molded fiberglass components is expected to be less than that of procuring the original components from the military.

  6. Development of a cooled microwave window. CRADA final report for CRADA Number Y-1293-0200

    SciTech Connect

    Bell, G.L.; Bigelow, T.S.; Leitch, R.M.; Berry, L.A.; Holber, W.M.

    1995-04-06

    The objective of this Cooperative Research and Development project (CRADA) was to generate a new design for a microwave vacuum window to be used with ASTeX Corporation plasma processing equipment. This vacuum window allows transmission of microwave power from an input waveguide into a vacuum chamber for creation of plasma using the electron cyclotron resonance process. Requirements for the window design are: higher power capability, improved resistance to chemical attack, and physical compatibility with previous window models. In these applications, a significant portion of the input power is deposited in the window by plasma bombardment so the window must remove a great deal of heat to remain at a reliable operating temperature. A power level increase from 1.5 kW to 5 kW is desired by ASTeX for the new window which must have {approximately} 120 mm diameter and be compatible with existing hardware. New applications for these processing systems are being developed by ASTeX; these require the use of highly reactive fluorine plasmas which can rapidly etch some window materials. Therefore, the use of a fluorine compatible window ceramic is required. Two new window designs were investigated using advanced window-modeling techniques and low-power laboratory testing. It was determined that both concepts were capable of operating at significantly higher power levels than present commercial windows and would meet the CRADA design objectives. The compatibility of the window materials considered with fluorine plasmas are believed to be acceptable. ASTeX has a continuing interest in pursuing these window designs and will likely begin manufacturing design work of the improved design in the near future. There will also be a continuing effort to keep AlN ceramic manufacturers interested in improving the quality of large AlN disks. Additional window tests and development work could be performed by ORNL/MMES if a suitable funding source is available.

  7. Hydrothermal Liquefaction of Agricultural and Biorefinery Residues Final Report – CRADA #PNNL/277

    SciTech Connect

    Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.; Rotness, Leslie J.; Zacher, Alan H.; Fjare, K. A.; Dunn, B. C.; McDonald, S. L.; Dassor, G.

    2010-07-28

    This project was performed as a Cooperative Research and Development Agreement (CRADA) with the participants: Archer-Daniels-Midland Company (ADM), ConocoPhillips (COP), and Pacific Northwest National Laboratory (PNNL). Funding from the federal government was provided by the Office of the Biomass Program within the Energy Efficiency and Renewable Energy assistant secretariat as part of the Thermochemical Conversion Platform. The three-year project was initiated in August 2007 with formal signing of the CRADA (#PNNL/277) in March 3, 2008 with subsequent amendments approved in November of 2008 and August of 2009. This report describes the results of the work performed by PNNL and the CRADA partners ADM and COP. It is considered Protected CRADA Information and is not available for public disclosure. The work conducted during this project involved developing process technology at PNNL for hydrothermal liquefaction (HTL) of agricultural and biorefinery residues and catalytic hydrothermal gasification (CHG) of the aqueous byproduct from the liquefaction step. Related work performed by the partners included assessment of aqueous phase byproducts, hydroprocessing of the bio-oil product and process analysis and economic modeling of the technology.

  8. NREL Quickens its Tech Transfer Efforts

    SciTech Connect

    Lammers, H.

    2012-02-01

    Innovations and 'aha' movements in renewable energy and energy efficiency, while exciting in the lab, only truly live up to their promise once they find a place in homes or business. Late last year President Obama issued a directive to all federal agencies to increase their efforts to transfer technologies to the private sector in order to achieve greater societal and economic impacts of federal research investments. The president's call to action includes efforts to establish technology transfer goals and to measure progress, to engage in efforts to increase the speed of technology transfer and to enhance local and regional innovation partnerships. But, even before the White House began its initiative to restructure the commercialization process, the National Renewable Energy Laboratory had a major effort underway designed to increase the speed and impact of technology transfer activities and had already made sure its innovations had a streamlined path to the private sector. For the last three years, NREL has been actively setting commercialization goals and tracking progress against those goals. For example, NREL sought to triple the number of innovations over a five-year period that began in 2009. Through best practices associated with inventor engagement, education and collaboration, NREL quadrupled the number of innovations in just three years. Similar progress has been made in patenting, licensing transactions, income generation and rewards to inventors. 'NREL is known nationally for our cutting-edge research and companies know to call us when they are ready to collaborate,' William Farris, vice president for commercialization and technology transfer, said. 'Once a team is ready to dive in, they don't want be mired in paperwork. We've worked to make our process for licensing NREL technology faster; it now takes less than 60 days for us to come to an agreement and start work with a company interested in our research.' While NREL maintains a robust patent

  9. Intermediate Temperature Carbon - Carbon Composite Structures. CRADA Final Report

    SciTech Connect

    Lara-Curzio, Edgar

    2007-06-01

    The objective of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC (the "Contractor") and Synterials, Inc. (the "Participant") was to demonstrate promising processing methods, which can lead to producing Carbon-Carbon Composites (CCC), with tensile and interlaminar properties comparable to those of organic matrix composites and environmental stability at 1200 F for long periods of time. The participant synthesized carbon-carbon composites with two different fiber coatings and three different matrices. Both parties evaluated the tensile and interlaminar properties of these materials and characterized the microstructure of the matrices and interfaces. It was found that fiber coatings of carbon and boron carbide provided the best environmental protection and resulted in composites with high tensile strength.

  10. CRADA opportunities in pressurized combustion research

    SciTech Connect

    Maloney, D.J.; Norton, T.S.; Casleton, K.H.

    1995-06-01

    The Morgantown Energy Technology Center recently began operation of a Low Emissions Combustor Test and Research (LECTR) Facility. This facility was built to support the development of Advanced Gas Turbine Systems (ATS) by providing test facilities and engineering support to METC customers through the ATS University-Industry Consortium and through CRADA participation with industrial partners.

  11. CRADA Final Report: Ionically Conductive Membranes Oxygen Separation

    SciTech Connect

    Visco, Steven J.

    2001-10-29

    Scientists at the Lawrence Berkeley National Laboratory (LBNL) in a collaborative effort with Praxair Corporation developed a bench-top oxygen separation unit capable of producing ultra-high purity oxygen from air. The device is based on thin-film electrolyte technology developed at LBNL as part of a solid oxide fuel cell program. The two teams first demonstrated the concept using planar ceramic disks followed by the development of tubular ceramic structures for the bench-top unit. The highly successful CRADA met all technical milestones on time and on budget. Due to the success of this program the industrial partner and the team at LBNL submitted a grant proposal for further development of the unit to the Advanced Technology Program administered by the National Institute of Standar~s. This proposal was selected for funding, and now the two teams are developing a precommercial oxygen separation unit under a 3-year, $6 million dollar program.

  12. Enhanced control and sensing for the REMOTEC ANDROS Mk VI robot. CRADA final report

    SciTech Connect

    Spelt, P.F.; Harvey, H.W.

    1998-08-01

    This Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot`s performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mk VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory`s Center for Engineering Systems Advanced Research (CESAR, B&R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding.

  13. 24 CFR 1000.244 - If the recipient has made a good-faith effort to negotiate a cooperation agreement and tax-exempt...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... through no fault of its own, may the Secretary waive the requirement for a cooperation agreement and a tax... been unsuccessful through no fault of its own, may the Secretary waive the requirement for a... tax-exempt status has been through no fault of its own. The Area ONAP will forward the request,...

  14. 24 CFR 1000.244 - If the recipient has made a good-faith effort to negotiate a cooperation agreement and tax-exempt...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... through no fault of its own, may the Secretary waive the requirement for a cooperation agreement and a tax... been unsuccessful through no fault of its own, may the Secretary waive the requirement for a... tax-exempt status has been through no fault of its own. The Area ONAP will forward the request,...

  15. Final CRADA Report ORNL-00-0609, Real-Time Control of Diesel Combustion Quality

    SciTech Connect

    Wagner, Robert M

    2010-07-01

    Detroit Diesel Corporation (DDC) and ORNL established this CRADA to improve heavy-duty engine efficiency with reduced emissions at relatively extreme operating regimes such has high EGR, low-load, and cold-start, with an emphasis on the application of advanced control strategies. The approach used in this collaborative effort was to include the application of novel analysis and modeling techniques developed from the application of nonlinear dynamics and chaos theory. More specifically, analytical techniques derived from these theories were to used to detect, characterize, and control the combustion instabilities that are responsible for poor combustion performance and corresponding high emissions. The foundation of this CRADA was established based on ORNL expertise on the fundamentals of advanced combustion operation and experience with nonlinear dynamics and controls in combustion systems. The initial plan was all data generation would be performed at DDC with an agreed upon experimental plan formed by both organizations. While numerous experiments were performed at DDC and the data was exchanged with ORNL researchers, the team decided to transfer an engine to ORNL to allow more flexibility and data generation opportunities. A prototype DDC Series 60 with a common rail fuel system was selected and installed at ORNL. DDC and ORNL maintained a strong collaboration throughout much of this project. Direct funding from DOE ended in 2004 and DDC continued to fund at a reduced amount through 2007. This CRADA has not been funded in more recent years but has been maintained active in anticipation of restored funding. This CRADA has led to additional collaborations between DDC and ORNL. The objectives are to: (1) Explore and establish boundaries of high efficiency clean combustion (HECC) modes on a DDC heavy-duty diesel engine; (2) Improve fundamental understanding of combustion instabilities for use in the development of predictive controls and diagnostics; and (3) Develop

  16. Security assessment of power systems including energy storage and with the integration of wind energy. Volume I. Digital transient simulation effort consulting Agreement No. 1. Final report

    SciTech Connect

    Anderson, P. M.

    1982-06-30

    The purpose of the effort reported has been to adapt the MOD-2 simulation models for implementation on a digital transient stability program. This has involved: selection of an appropriate host program, examination of the host program interface, analysis of the analog models for digital implementation, FORTRAN coding of the model equations, installation and debugging on the host program, and final model verification. Synchronous machine equations are analyzed, with particular emphasis on numerical solution. (LEW)

  17. Microwave processing of silicon carbide. CRADA final report

    SciTech Connect

    Kimrey, H.D.; Kiggans, J.O.; Ness, E.A.; Rafaniello, W.

    1998-02-01

    A Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc. (LMES) and Dow Chemical Company was initiated on May 3, 1993. (Lockheed Martin Energy Research Inc. (LMER) replaced LMES). The completion date for the Agreement was December 1996. The purpose of this project is to develop microwave processing techniques to produce superior silicon carbide. Sintered silicon carbide is an attractive material for use in high-stress, high-temperature, high-wear, or highly corrosive applications. However, use in these applications has been hampered by a lack of consistency in strength, density, and other physical properties. It is proposed that the enhanced sintering that has been achieved using microwaves in oxide and halide systems be applied to the sintering of these materials to produce a more highly controlled density and microstructure. This will, in turn, increase the strength and Weibull modulus of the sintered body. The use of microwave energy to anneal for a moderate temperature (1,400--1,600 C) anneal in a high vacuum (< 10{sup {minus}4} Torr) results in an improvement in the sintered density and density distribution. These changes in turn result in improved properties of the sintered compacts. Further, scale up of the process has resulted in the routine production of 3 kg components in excess of 4 cm in thickness.

  18. Frito-Lay North America/NREL CRADA: Cooperative Research and Development Final Report, CRADA Number CRD-06-176

    SciTech Connect

    Walker, A.

    2013-06-01

    Frito Lay North America (FLNA) requires technical assistance for the evaluation and implementation of renewable energy and energy efficiency projects in production facilities and distribution centers across North America. Services provided by NREL do not compete with those available in the private sector, but rather provide FLNA with expertise to create opportunities for the private sector renewable/efficiency industries and to inform FLNA decision making regarding cost-effective projects. Services include: identifying the most cost-effective project locations based on renewable energy resource data, utility data, incentives and other parameters affecting projects; assistance with feasibility studies; procurement specifications; design reviews; and other services to support FNLA in improving resource efficiency at facilities. This Cooperative Research and Development Agreement (CRADA) establishes the terms and conditions under which FLNA may access capabilities unique to the laboratory and required by FLNA. Each subsequent task issued under this umbrella agreement would include a scope-of-work, budget, schedule, and provisions for intellectual property specific to that task.

  19. Program management plan for development, demonstration, testing, and evaluation efforts associated with Oak Ridge Reservation`s Land Disposal Restrictions Federal Facility Compliance Agreement

    SciTech Connect

    Conley, T.B.

    1994-04-01

    This program management plan covers the development, demonstration, testing, and evaluation efforts necessary to identify treatment methods for all the waste listed in Appendix B of the ORR`s LDR/FFCA as well as any new wastes which meet Appendix B criteria. To successfully identify a treatment method, at least a proof-of-principle level of understanding must be obtained: that is, the candidate processes must be demonstrated as effective in treating the wastes to the LDR; however, an optimized process is not required. Where applicable and deemed necessary and where the budgets will support them, pilot-scale demonstrations will be pursued. The overall strategy being adopted in this program will be composed of the following activities: Scoping of the study; characterization; development and screening of alternatives; treatability investigations; and detailed analysis of alternatives.

  20. Advanced austenitic alloys for fossil power systems. CRADA final report

    SciTech Connect

    Swindeman, R.W.; Cole, N.C.; Canonico, D.A.; Henry, J.F.

    1998-08-01

    In 1993, a Cooperative Research and Development Agreement (CRADA) was undertaken between Oak Ridge National Laboratory and ABB Combustion Engineering t examine advanced alloys for fossil power systems. Specifically, the use of advanced austenitic stainless steels for superheater/reheater construction in supercritical boilers was examined. The strength of cold-worked austenitic stainless steels was reviewed and compared to the strength and ductility of advanced austenitic stainless steels. The advanced stainless steels were found to retain their strength to very long times at temperatures where cold-worked standard grades of austenitic stainless steels became weak. Further, the steels exhibited better long-time stability than the stabilized 300 series stainless steels in either the annealed or cold worked conditions. Type 304H mill-annealed tubing was provided to ORNL for testing of base metal and butt welds. The tubing was found to fall within range of expected strength for 304H stainless steel. The composite 304/308 stainless steel was found to be stronger than typical for the weldment. Boiler tubing was removed from a commercial boiler for replacement by newer steels, but restraints imposed by the boiler owners did not permit the installation of the advanced steels, so a standard 32 stainless steel was used as a replacement. The T91 removed from the boiler was characterized.

  1. Cimstation/IM enhanced data verification, CRADA final report for CRADA number Y-1292-0162

    SciTech Connect

    Biddix, M.D.; Turner, J.

    1994-05-16

    This report discusses a CRADA code used to enhance the Cimstation in ramifaction of inspection part programs as they are being develop. This report briefly discussed the following topics and contains a code listing in the back: algorithm explanation; Cimstation CAD models; importing inspection point data; need for a new algorithm; details of the algorithms; formulas/mathematics used for the algorithm; algorithm software design diagram; and software function descriptions.

  2. Microwave processing of Tantalum capacitors. CRADA final report

    SciTech Connect

    McMillan, A.D.; Lauf, R.J.; Vierow, W.F.

    1998-03-01

    A Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc. (LMES) and AVX Tantalum Corporation (AVX) of Biddeford, Maine, was initiated in October 1991. [Lockheed Martin Energy Research Corp. (LMER) has replaced LMES]. The completion date for the Agreement was March 1996. The purpose of this work is to explore the feasibility of an advanced microwave processing concept to develop higher capacitance tantalum anodes. Tantalum capacitors are used where high reliability is needed (e.g., pacemakers, hearing aids, and military devices). Two types of tantalum powder are used: sodium-reduced powder and electron beam-refined powder. Sodium-reduced powder has higher surface area, but lower purity; electron beam-refined powder has higher purity for working voltages, but somewhat lower surface area. The powder is pressed into pellets using traditional methods and then placed in the microwave furnace for processing. It is of interest to determine if variable-frequency microwave sintering can increase quality while decreasing processing time and decreasing or eliminating surface contamination; these issues must be addressed while retaining the maximum surface area of the anode. Meeting each of these needs will result in a higher quality anodic film, which will thereby increase the dielectric strength. Additionally, microwave sintering might enable the authors to develop a strong sintered anode without excessive grain growth. The variable-frequency microwave furnace (VFMF), located at the Y-12 Plant, allows the authors to study the effects of sintering over a wide frequency range. This novel design uses a high-power traveling wave tube (TWT), originally developed for electronic warfare. By using this microwave source, one can not only select individual microwave frequencies for particular experiments, but also achieve uniform power densities over a large area by the superposition of many different frequencies.

  3. Cooperative research and development agreements at METC

    SciTech Connect

    Ludlow, J.C.; Jarr, L.A.; Anderson, R.J.

    1995-06-01

    The Federal Technology Transfer Act of 1986 (P.L. 99-502) provided a new mechanism for joint research between private parties and the Morgantown Energy Technology Center (METC). Joint projects under this law are called Cooperative Research And Development Agreements (CRADAs) and are simply agreements between METC and the private sector to work together on a mutually beneficial project. Of primary interest to METC is the development and deployment of: (1) clean, efficient power generation technologies, (2) technologies for the characterization and exploitation of the Nation`s natural gas resource, and (3) environmental remediation technologies.

  4. Bioremediation of PCBs. CRADA final report

    SciTech Connect

    Klasson, K.T.; Abramowicz, D.A.

    1996-06-01

    The Cooperative Research and Development Agreement was signed between Oak Ridge National Laboratory (ORNL) and General Electric Company (GE) on August 12, 1991. The objective was a collaborative venture between researchers at GE and ORNL to develop bioremediation of polychlorinated biphenyls (PCBs). The work was conducted over three years, and this report summarizes ORNL`s effort. It was found that the total concentration of PCBs decreased by 70% for sequential anaerobic-aerobic treatment compared with a 67% decrease for aerobic treatment alone. The sequential treatment resulted in PCB products with fewer chlorines and shorter halflives in humans compared with either anaerobic or aerobic treatment alone. The study was expected to lead to a technology applicable to a field experiment that would be performed on a DOE contaminated site.

  5. [A variable frequency microwave furnace]. CRADA final report for CRADA Number ORNL91-0055

    SciTech Connect

    Lauf, R.J.

    1994-12-08

    The goals of this CRADA were to: (1) development and demonstrate a highly frequency-agile microwave furnace; (2) explore applications of the furnace for materials processing; and (3) develop control systems and packaging that are robust, user-friendly, and suitable for sale as a turnkey system. Microwave Laboratories, Inc. (MLI) designed, built, and successfully brought to market a benchtop Variable Frequency Microwave Furnace (VFMF). The concept has demonstrated advantages in polymer curing, waste remediation, and diamond (CVD). Through experimentation and modeling, the VFMF approach has gained credibility within the technical community.

  6. Application of powder metallurgy techniques for the development of non-toxic ammunition. Final CRADA report

    SciTech Connect

    Lowden, R.; Kelly, R.

    1997-05-30

    The purpose of the Cooperative Research and Development Agreement (CRADA) between Martin Marietta Energy Systems, Inc., and Delta Frangible Ammunition (DFA), was to identify and evaluate composite materials for the development of small arms ammunition. Currently available small arms ammunition utilizes lead as the major component of the projectile. The introduction of lead into the environment by these projectiles when they are expended is a rapidly increasing environmental problem. At certain levels, lead is a toxic metal to the environment and a continual health and safety concern for firearm users as well as those who must conduct lead recovery operations from the environment. DFA is a leading supplier of high-density mixtures, which will be used to replace lead-based ammunition in specific applications. Current non-lead ammunition has several limitations that prevent it from replacing lead-based ammunition in many applications (such as applications that require ballistics, weapon recoil, and weapon function identical to that of lead-based ammunition). The purpose of the CRADA was to perform the research and development to identify cost-effective materials to be used in small arms ammunition that eventually will be used in commercially viable, environmentally conscious, non-lead, frangible and/or non-frangible, ammunition.

  7. CRADA No. NFE-10-02715 Assessment of AFA Stainless Steels for Tube Products in Chemical Processing and Energy Production Applications

    SciTech Connect

    Brady, Michael P; Yamamoto, Yukinori; Epler, Mario; Magee, John H

    2011-09-01

    Oak Ridge National Laboratory (ORNL) and Carpenter Technology Corporation (Carpenter) participated in an in-kind cost share cooperative research and development agreement (CRADA) effort under the auspices of the Energy Efficiency and Renewable Energy (EERE) Technology Maturation Program to assess material properties of several potential AFA family grades and explore the feasibility of producing alumina-forming austenitic (AFA) stainless steels in tubular form needed for many power generation and chemical process applications. Carpenter's Research Laboratory successfully vacuum melted 30 lb heats of seven candidate AFA alloy compositions representing a wide range of alloy content and intended application temperatures. These compositions were evaluated by ORNL and Carpenter R&D for microstructure, tensile properties, creep properties, and oxidation resistance. In parallel, additional work was directed toward an initial tube manufacture demonstration of a baseline AFA alloy. Carpenter successfully manufactured a 10,000 lb production heat and delivered appropriate billets to a partner for extrusion evaluation. Tube product was successfully manufactured from the baseline AFA alloy, indicating good potential for commercially produced AFA tubular form material.

  8. CRADA opportunities in pressurized combustion research

    SciTech Connect

    Maloney, D.J.; Norton, T.S.; Casleton, K.H.

    1995-12-31

    The Morgantown Energy Technology Center recently began operation of a Low Emissions Combustor Test and Research (LECTR) Facility. This facility was built to support the development of Advanced Gas Turbine Systems (ATS) by providing test facilities and engineering support to METC customers through the ATS University-Industry Consortiu and through CRADA participation with industrial partners. The LECTR is a versatile test facility with capabilities for evaluating a variety of low emissions combustion concepts at temperatures and pressures representative of gas turbine applications. The LECTR was constructed as a mid-scale test platform to support DOE`s ATS program and utilizes the full range of high pressure (up to 30 atm) high temperature (1000{degrees}F air preheat, 3300{degrees}F combustor wall), and mass flows (3.5 lb/s combustion air) available in METC`s Advanced Combustion Facility. The LECTR is now operational and has most recently been employed to characterize the operating and emissions characteristics of an industrical-scale, lean premixed gas burner at elevated pressures for potential gas turbine applications.

  9. Inks for Ink Jet Printed Contacts for High Performance Silicon Solar Cells: Cooperative Research and Development Final Report, CRADA No. CRD-06-199

    SciTech Connect

    Ginley, D.

    2013-01-01

    The work under the proposed CRADA will be a joint effort by BP Solar and NREL to develop new types of high performance inks for high quality contacts to silicon solar cells. NREL will develop inks that have electronic properties that will allow the formation of high quality ohmic contacts to n- and p-type crystalline silicon, and BP Solar will evaluate these contacts in test contact structures.

  10. Tire Development for Effective Transportation and Utilization of Used Tires, CRADA 01-N044, Final Report

    SciTech Connect

    Susan M. Maley

    2004-03-31

    Scrap tires represent a significant disposal and recycling challenge for the United States. Over 280 million tires are generated on an annual basis, and several states have large stockpiles or abandoned tire piles that are slated for remediation. While most states have programs to address the accumulation and generation of scrap tires, most of these states struggle with creating and sustaining recycling or beneficial end use markets. One of the major issues with market development has been the costs associated with transporting and processing the tires into material for recycling or disposal. According to a report by the Rubber Manufactures Association tire-derived fuel (TDF) represents the largest market for scrap tires, and approximately 115 million tires were consumed in 2001 as TDF (U.S. Scrap Tire Markets, 2001, December 2002, www.rma.org/scraptires). This market is supported primarily by cement kilns, followed by various industries including companies that operate utility and industrial boilers. However the use of TDF has not increased and the amount of TDF used by boiler operators has declined. The work completed through this cooperative research and development agreement (CRADA) has shown the potential of a mobile tire shredding unit to economically produce TDF and to provide an alterative low cost fuel to suitable coal-fired power systems. This novel system addresses the economic barriers by processing the tires at the retailer, thereby eliminating the costs associated with hauling whole tires. The equipment incorporated into the design allow for small 1-inch chunks of TDF to be produced in a timely fashion. The TDF can then be co-fired with coal in suitable combustion systems, such as a fluidized bed. Proper use of TDF has been shown to boost efficiency and reduce emissions from power generation systems, which is beneficial to coal utilization in existing power plants. Since the original scope of work outlined in the CRADA could not be completed because

  11. Gelcasting of CRYSTAR{reg_sign} silicon carbide ceramics. CRADA final report

    SciTech Connect

    Nunn, S.D.; Willkens, C.A.

    1998-12-31

    This Cooperative Research and Development Agreement (CRADA) was undertaken to assess the applicability the gelcasting process for forming ceramic green bodies using Saint-Gobain/Norton Industrial Ceramics Corporation`s proprietary CRYSTAR{reg_sign} silicon carbide powder. A gelcasting process, specifically tailored to Saint-Gobain/Norton`s powder composition, was developed and used successfully to form green bodies for property evaluation. This preliminary evaluation showed that the gelcast material had characteristics and properties comparable to Norton`s baseline material. Wafer carrier molds were received from Norton for gelcasting a complex-shaped configuration with CRYSTAR{reg_sign} silicon carbide. Gelcasting experiments showed that Norton`s standard plaster of paris molds were incompatible with the gelcasting process. Mold surface treatments and the use of alternative castable mold materials were investigated, however, a successful process was not identified. The highest quality parts were cast in either glass or aluminum molds.

  12. CRADA ORNL 91-0046B final report: Assessment of IBM advanced computing architectures

    SciTech Connect

    Geist, G.A.

    1996-02-01

    This was a Cooperative Research and Development Agreement (CRADA) with IBM to assess their advanced computer architectures. Over the course of this project three different architectures were evaluated. The POWER/4 RIOS1 based shared memory multiprocessor, the POWER/2 RIOS2 based high performance workstation, and the J30 PowerPC based shared memory multiprocessor. In addition to this hardware several software packages where beta tested for IBM including: ESSO scientific computing library, nv video-conferencing package, Ultimedia multimedia display environment, FORTRAN 90 and C++ compilers, and the AIX 4.1 operating system. Both IBM and ORNL benefited from the research performed in this project and even though access to the POWER/4 computer was delayed several months, all milestones were met.

  13. Manufacture of die casting dies by hot isostatic pressing. CRADA final report

    SciTech Connect

    Viswanathan, S.; Ren, W.; Luk, K.; Brucher, H.G.

    1998-09-01

    The reason for this Cooperative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory (ORNL) and Doehler-Jarvis was to investigate the manufacture die-casting dies with internal water-cooling lines by hot-isostatic pressing (HIPing) of H13 tool steel powder. The use of HIPing will allow the near-net-shape manufacture of dies and the strategic placement of water-cooling lines during manufacture. The production of near-net-shape dies by HIPing involves the generation of HIPing diagrams, the design of the can that can be used for HIPing a die with complex details, strategic placement of water-cooling lines in the die, computer modeling to predict movement of the water lines during HIPing, and the development of strategies for placing water lines in the appropriate locations. The results presented include a literature review, particle analysis and characterization of H13 tool steel powder, and modeling of the HIPing process.

  14. CRADA Final Report: Process development for hybrid solar cells

    SciTech Connect

    Ager, Joel W

    2011-02-14

    TCF funding of a CRADA between LBNL and RSLE leveraged RSLE's original $1M investment in LBNL research and led to development of a solar cell fabrication process that will bring the high efficiency, high voltage hybrid tandem solar cell closer to commercialization. RSLE has already built a pilot line at its Phoenix, Arizona site.

  15. 76 FR 25362 - Cooperative Research and Development Agreement: Butanol Fuel Blend Usage With Marine Outboard...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-04

    ... Outboard Engines AGENCY: Coast Guard, DHS. ACTION: Notice of intent; request for public comments. SUMMARY... Agreement (CRADA) to identify and investigate the use of butanol fuel blends within marine outboard engines, with the overarching goal of reducing the engines' Greenhouse Gas (GHG) emissions. While the...

  16. 77 FR 19678 - Cooperative Research and Development Agreement: Asset Tracking and Reporting Technology

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-02

    ... Register (73 FR 3316). Cooperative Research and Development Agreements Cooperative Research and Development... (CRADA) with General Dynamics C4 Systems, Inc. (General Dynamics), to test, evaluate, and document the... participants would test, evaluate, and document the strengths and weaknesses of at least one technical...

  17. Accelerated deployment of nanostructured hydrotreating catalysts. Final CRADA Report.

    SciTech Connect

    Libera, J.A.; Snyder, S.W.; Mane, A.; Elam, J.W.; Cronauer, D.C.; Muntean, J.A.; Wu, T.; Miller, J.T.

    2012-08-27

    Nanomanufacturing offers an opportunity to create domestic jobs and facilitate economic growth. In response to this need, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy issued a Research Call to develop nanomanufacturing capabilities at the National Laboratories. High performance catalysts represent a unique opportunity to deploy nanomanufacturing technologies. Re-refining of used lube oil offers an opportunity to create manufacturing jobs and decrease dependence on imported petroleum. Improved catalysts are required to produce a better quality product, decrease environmental impact, extend catalyst life, and improve overall economics of lube oil re-refining. Argonne National Laboratory (Argonne) in cooperation with Universal Lubricants, Inc. (ULI) and Chemical Engineering Partners (CEP) have carried out a Cooperative Research and Development Agreement (CRADA) to prepare nanostructured hydrotreating catalysts using atomic layer deposition (ALD) to exhibit superior performance for the re-refining of used lube oil. We investigated the upgrading of recycled lube oil by hydrogenation using commercial, synthetically-modified commercial catalysts, and synthesized catalysts. A down-flow (trickle bed) catalytic unit was used for the hydrogenation experiments. In addition to carrying out elemental analyses of the various feed and product fractions, characterization was undertaken using H{sup 1} and C{sup 13} NMR. Initially commercial were evaluated. Second these commercial catalysts were promoted with precious metals using atomic layer deposition (ALD). Performance improvements were observed that declined with catalyst aging. An alternate approach was undertaken to deeply upgrade ULI product oils. Using a synthesized catalyst, much lower hydrogenation temperatures were required than commercial catalysts. Other performance improvements were also observed. The resulting lube oil fractions were of high purity even at low reaction severity. The

  18. Recycling end-of-life vehicles of the future. Final CRADA report.

    SciTech Connect

    Jody, B. J.; Pomykala, J. A.; Spangenberger, J. S.; Daniels, E.; Energy Systems

    2010-01-14

    Argonne National Laboratory (the Contractor) entered into a Cooperative Research and Development Agreement (CRADA) with the following Participants: Vehicle Recycling Partnership, LLC (VRP, which consists of General Motors [GM], Ford, and Chrysler), and the American Chemistry Council - Plastics Division (ACC-PD). The purpose of this CRADA is to provide for the effective recycling of automotive materials. The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use of advanced lightweighting materials or systems in future vehicles. The issues, technical requirements, and cost and institutional considerations in achieving that goal are complex and will require a concerted, focused, and systematic analysis, together with a technology development program. The scope and tasks of this program are derived from 'A Roadmap for Recycling End-of-Life Vehicles of the Future,' prepared in May 2001 for the DOE Office of Energy, Efficiency, and Renewable Energy (EERE)-Vehicle Technologies Program. The objective of this research program is to enable the maximum recycling of automotive materials and obsolete vehicles through the development and commercialization of technologies for the separation and recovery of materials from end-of-life vehicles (ELVs). The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use of

  19. Evaluation of Durable Metallic Supports for Catalytic Combustors, CRADA Final Report ORNL 00-0570

    SciTech Connect

    Pint, B. A.; Wright, I. G.; Lara-Curzio, E.; McCarty, J.; Barnes, J.

    2003-10-01

    In 2000, a Cooperative Research and Development Agreement (CRADA) was undertaken between the Oak Ridge National Laboratory (ORNL) and Catalytica Energy Systems Incorporated (CESI) to determine the properties of current metallic catalyst supports and examine new candidate alloys for this application. A team was established at ORNL to examine oxidation-limited lifetime of these thin-walled metallic components using standard lifetime models and to measure the mechanical properties of the foils (40-200:m in thickness) which can differ substantially from bulk properties. Oxidation experiments were conducted on foil specimens at 700/-1100/C in laboratory air and in air with 10 vol.% water vapor to better simulate the combustor environment. At the higher test temperatures, time to oxidation-induced (i.e. breakaway oxidation) failure was determined in 1h cycles in order to verify predictions from a standard reservoir-type oxidation lifetime model. Selected specimens were run for >10,000h in 100 or 500h cycles at lower test temperatures in order to determine the oxidation kinetics for the model. The creep properties of selected foils were measured for 4,000-8,000h at operation-relevant stresses and temperatures. None of the new candidate alloys significantly out-performed currently used alloys in laboratory testing, particularly in oxidation lifetime testing. Therefore, engine testing was not performed on any of the new candidate alloys. Both the oxidation- and creep-resistance of FeCrAl alloys was greater than expected and the results of the CRADA allowed CESI to extend life or increase operating temperatures for these lower cost substrate alloys in the next generation of catalyst modules.

  20. Metallization technology for tenth-micron range integrated circuits. CRADA final report for CRADA number ORNL92-0104

    SciTech Connect

    Berry, L.A.; Gorbatkin, S.M.; Rossnagel, S.M.; Harper, J.M.E.

    1996-04-11

    A critical step in the fabrication of integrated circuits is the deposition of metal layers which interconnect the various circuit elements that have been formed in earlier process steps. In particular, columns of metal 2-3 times higher than the characteristic dimension of the circuit are needed. At the time of initiation of this CRADA, the state-of-the-art was the production of 1-1.5 micron-high columns for 0.5 micron-wide features with an expected reduction in size by a factor of two or more within five to ten years. Present commercial technologies cannot deposit such features with the process temperature, aspect ratio (ratio of height to diameter), and/or materials capability needed for future devices. This CRADA had the objective of developing a commercial tool capable of depositing metal (either copper or aluminum) at temperatures below 300{degrees}C into features with sizes approaching 0.2 micron on 200-mm wafers. The capability of future modification for deposition of alloys of controllable composition was also an important characteristic. The key technical accomplishments of this CRADA include the development of a system capable of delivering highly ionized metal plasmas, refinement of spectroscopic techniques for in situ monitoring of the ion/neutral ratio, use of these plasmas for filling and lining submicron trenches used for integrated circuit fabrication, and generation of fundamental data on the angular dependent sputtering yield which will prove useful for modeling the time evolution of feature filling and lining.

  1. [TDA`s hot gas desulfurization sorbent]. TDA Inc./FETC CRADA No. 97-F003, final report

    SciTech Connect

    Berry, D.A.

    1997-11-14

    This report describes the results of a Cooperative Research and Development Agreement (CRADA) between TDA Incorporated and the Federal Energy Technology Center (FETC) in Morgantown, West Virginia. The objective of this CRADA was to evaluate the performance of TDA`s hot gas desulfurization (HGD) sorbent for use in fossil fuel gasification processes. This particular sorbent, TNT-MB was developed for use in moving-bed HGD reactors in an integrated gasification combined cycle (IGCC) power plant. Two separate tests were conducted; a 10-cycle test, and a low-temperature scoping test. All 10 cycles absorbed H{sub 2}S for the prescribed 125 minutes without breakthrough. The H{sub 2}S concentration remained below 50 ppmv throughout the 125 minute test period. The sorbent showed an increase in attrition resistance from 1.8% (fresh) to 0.87% (reactor inlet) and 0.64% (reactor outlet) after 10 cycles. The results of an additional attrition test are also contained in this report.

  2. Advanced Load Identification and Management for Buildings: Cooperative Research and Development Final Report, CRADA Number: CRD-11-422

    SciTech Connect

    Gentile-Polese, L.

    2014-05-01

    The goal of this CRADA work is to support Eaton Innovation Center (Eaton) efforts to develop advanced load identification, management technologies, and solutions to reduce building energy consumption by providing fine granular visibility of energy usage information and safety protection of miscellaneous electric loads (MELs) in commercial and residential buildings. MELs load identification and prediction technology will be employed in a novel 'Smart eOutlet*' to provide critical intelligence and information to improve the capability and functionality of building load analysis and design tools and building power management systems. The work scoped in this CRADA involves the following activities: development and validation of business value proposition for the proposed technologies through voice of customer investigation, market analysis, and third-party objective assessment; development and validation of energy saving impact as well as assessment of environmental and economic benefits; 'smart eOutlet' concept design, prototyping, and validation; field validation of the developed technologies in real building environments. (*Another name denoted as 'Smart Power Strip (SPS)' will be used as an alternative of the name 'Smart eOutlet' for a clearer definition of the product market position in future work.)

  3. Equipment Only - Solar Resources Measurements at the University of Texas at Austin, TX: Cooperative Research and Development Final Report, CRADA Number CRD-07-222

    SciTech Connect

    Stoffel, T.

    2013-01-01

    Faculty and staff at the University of Texas at Austin collected solar resource measurements at their campus using equipment on loan from the National Renewable Energy Laboratory. The equipment was used to train students on the operation and maintenance of solar radiometers and was returned to NREL's Solar Radiation Research Laboratory upon completion of the CRADA. The resulting data augment the solar resource climatology information required for solar resource characterizations in the U.S. The cooperative agreement was also consistent with NREL's goal of developing an educated workforce to advance renewable energy technologies.

  4. NaREC Offshore and Drivetrain Test Facility Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-04-140

    SciTech Connect

    Musial, W.

    2014-08-01

    The National Renewable Energy Laboratory (NREL) and the National Renewable Energy Centre (NaREC) in the United Kingdom (UK) have a mutual interest in collaborating in the development of full-scale offshore wind energy and drivetrain testing facilities. NREL and NaREC will work together to share resources and experiences in the development of future wind energy test facilities. This Cooperative Research and Development Agreement (CRADA) includes sharing of test protocols, infrastructure cost data, test plans, pro forma contracting instruments, and safe operating strategies. Furthermore, NREL and NaREC will exchange staff for training and development purposes.

  5. CENER/NREL Collaboration in Testing Facility and Code Development: Cooperative Research and Development Final Report, CRADA Number CRD-06-207

    SciTech Connect

    Moriarty, P.

    2014-11-01

    Under the funds-in CRADA agreement, NREL and CENER will collaborate in the areas of blade and drivetrain testing facility development and code development. The project shall include NREL assisting in the review and instruction necessary to assist in commissioning the new CENER blade test and drivetrain test facilities. In addition, training will be provided by allowing CENER testing staff to observe testing and operating procedures at the NREL blade test and drivetrain test facilities. CENER and NREL will exchange blade and drivetrain facility and equipment design and performance information. The project shall also include exchanging expertise in code development and data to validate numerous computational codes.

  6. In-service testing of Ni{sub 3}Al coupons and trays in carburizing furnaces at Delphi Saginaw. CRADA final report

    SciTech Connect

    Sikka, V.K.; Santella, M.L.; Viswanathan, S.; Swindeman, R.W.; Chatterjee, M.

    1998-08-01

    This Cooperative Research and Development Agreement (CRADA) report deals with the development of nickel aluminide alloy for improved longer life heat-resistant fixture assemblies for batch and continuous pusher carburizing furnaces. The nickel aluminide development was compared in both coupon and component testing with the currently used Fe-Ni-Cr heat-resisting alloy known as HU. The specific goals of the CRADA were: (1) casting process development, (2) characterization and possible modification of the alloy composition to optimize its manufacturing ability and performance under typical furnace operating conditions, and (3) testing and evaluation of specimens and prototype fixtures. In support of the CRADA objectives, coupons of nickel aluminide and the HU alloy were installed in both batch and pusher furnaces. The coupons were taken from two silicon levels and contained welds made with two different filler compositions (IC-221LA and IC-221W). Both nickel-aluminide and HU coupons were removed from the batch and pusher carburizing furnace at time intervals ranging from one month to one year. The exposed coupons were cut and mounted for metallographic, hardness, and microprobe analysis. The results of the microstructural analysis have been transmitted to General Motors Corporation, Saginaw Division (Delphi Saginaw) through reports that were presented at periodic CRADA review meetings. Based on coupon testing and verification of the coupon results with the testing of trays, Delphi Saginaw moved forward with the use of six additional trays in a batch furnace and two assemblies in a pusher furnace. Fifty percent of the trays and fixtures are in the as-cast condition and the remaining trays and fixtures are in the preoxidized condition. The successful operating experience of two assemblies in the pusher furnace for nearly a year formed the basis for a production run of 63 more assemblies. The production run required melting of 94 heats weighing 500 lb. each. Twenty

  7. Final Report on CRADA ORNL05-0703

    SciTech Connect

    Christen, D. K.

    2010-04-27

    The work of this CRADA has been focused on the development of Rolling-Assisted Biaxially Textured Substrate (RABiTS)-based high-temperature superconducting (HTS) coated conductor technology that is in the pre-commercial development stage. Metal-Oxide Technologies, Inc. (MetOx) is a Houston-based small business that is developing and manufacturing second-generation (2G) HTS wire using an all-Metallo-Organic Chemical Vapor Deposition (MOCVD) process, including the buffer layers and HTS coating. Advances toward commercialization were enabled by coordinated interactions that facilitated the synthesis, characterization, and iterative optimization of prototype 2G wire segments.

  8. THE DESIGN OF AN RF ANTENNA FOR A LARGE-BORE, HIGH POWER, STEADY STATE PLASMA PROCESSING CHAMBER FOR MATERIAL SEPARATION - CRADA FINAL REPORT for CRADA Number ORNL00-0585

    SciTech Connect

    Rasmussen, D. A.; Freeman, R. L.

    2001-11-07

    The purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC, (Contractor), and Archimedes Technology Group, (Participant) is to evaluate the design of an RF antenna for a large-bore, high power, steady state plasma processing chamber for material separation. Criteria for optimization will be to maximize the power deposition in the plasma while operating at acceptable voltages and currents in the antenna structure. The project objectives are to evaluate the design of an RF antenna for a large-bore, high power, steady state plasma processing chamber for material separation. Criteria for optimization will be to maximize the power deposition in the plasma while operating at acceptable voltages and currents in the antenna structure.

  9. CRADA with International Polyol Chemicals, Inc. (IPCI) and Pacific Northwest National Laboratory (PNL-053): Process Optimization for Polyols Production from Glucose

    SciTech Connect

    Elliott, D.C.

    1997-01-01

    The objective of this CRADA is to provide sufficient process development to allow a decision for commercialization of the International Polyol Chemicals, Inc. (IPCI) process for production of polyols from glucose. This cooperative research allowed Pacific Northwest National Laboratory (PNNL) to focus its aqueous processing systems expertise on the IPCI process to facilitate process optimization. The project was part of the Department of Energy's (DOE/EE-OIT) Alternative Feedstocks Program (AFP). The project was a demonstration of the cooperative effort between the AFP and the Department of Agriculture's Alternative Agriculture Research Center, which was also funding IPCI research.

  10. Acciona Solar Technology Performance Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-10-384

    SciTech Connect

    Mehos, M. S.

    2014-01-01

    Under this agreement, NREL will work with Acciona to conduct joint testing, evaluation, and data collection related to Acciona's solar technologies and systems. This work includes, but is not limited to, testing and evaluation of solar component and system technologies, data collection and monitoring, performance evaluation, reliability testing, and analysis. This work will be conducted at Acciona's Nevada Solar One (NSO) power plant and NREL test facilities. Specific projects will be developed on a task order basis. Each task order will identify the name of the project and deliverables to be produced under the task order. Each task order will delineate an estimated completion date based on a project's schedule. Any reports developed under this CRADA must be reviewed by both NREL and Acciona and approved by each organization prior to publication of results or documents.

  11. AIST-NREL Concentrator Photovoltaic (CPV) Demonstration. Cooperative Research and Development Final Report, CRADA Number CRD-10-402

    SciTech Connect

    Kurtz, Sarah

    2015-05-11

    The purpose of the project is to demonstrate and quantitatively compare performance of CPV systems installed in Japan and in the United States. The deployment conditions (e.g. spectrum and temperature) are site dependent and the optimal design of the system may vary with location. The CPV systems will use multi-junction concentrator cells for the conversion of sunlight into electricity. The optimal design of the cell may depend on the location at which a CPV system is installed. Thus, the systems in Japan and in the U.S. will all use a combination of concentrator cells obtained from three different vendors. This CRADA pertains only to the equipment that will be installed in the U.S. This effort is a collaborative project between AIST and NREL.

  12. Inverted Metamorphic Cell Development: Cooperative Research and Development Final Report, CRADA Number CRD-05-156

    SciTech Connect

    Wanlass, M.

    2012-05-01

    This CRADA targeted technology transfer of the inverted metamorphic multi-junction (IMM) solar cell innovation from NREL to Emcore Photovoltaics. The technology transfer was successfully completed. Additionally, NREL provided materials characterization of solar cell structures produced at Emcore.

  13. 78 FR 42532 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-16

    ... proteins. The document did not specify dates for when the submission of proposals are due. FOR FURTHER INFORMATION CONTACT: Angela Ervin, 202-254-5624. Correction In the Federal Register of May 16, 2013, in FR Doc... proposals on or before August 8, 2013. Correction In the Federal Register of May 16, 2013, in FR Doc....

  14. 78 FR 57401 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-18

    ...: Science and Technology Directorate, Transportation Security Administration Office of Law Enforcement... Department of Homeland Security Science and Technology Directorate (DHS S&T), located in Washington, DC, and... and data gathering to determine the most significant genetic and behavioral characteristics...

  15. 78 FR 28866 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... for Animal Health) as tested in a U.S. Reference Laboratory, e.g., USDA APHIS FADDL. DHS S&T is... or by another entity and upon request by USDA APHIS, be supplied to USDA APHIS FADDL and accredited... domestic swine herds, and ideally with other species that are susceptible to FMDV, e.g., sheep,...

  16. 78 FR 71632 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-29

    ...-6671. SUPPLEMENTARY INFORMATION: Background Ensuring cargo security as it flows through supply chains... need to identify illegal activity introduced into the supply chain while facilitating the flow of legal... cargo conveyance as it moves through the supply chain and reporting any security breaches....

  17. CRADA opportunities with METC`s gasification and hot gas cleanup facility

    SciTech Connect

    Galloway, E.N.; Rockey, J.M.; Tucker, M.S.

    1995-06-01

    Opportunities exist for Cooperative Research and Development Agreements (CRADA) at the Morgantown Energy Technology Center (METC) to support commercialization of IGCC power systems. METC operates an integrated gasifier and hot gas cleanup facility for the development of gasification and hot gas cleanup technologies. The objective of our program is to gather performance data on gasifier operation, particulate removal, desulfurization and regeneration technologies. Additionally, slip streams are provided for developing various technologies such as; alkali monitoring, particulate measuring, chloride removal, and contaminate recovery processes. METC`s 10-inch diameter air blown Fluid Bed Gasifier (FBG) provides 300 lb/hr of coal gas at 1100{degrees}F and 425 psig. The particulate laden gas is transported to METC`s Modular Gas Cleanup Rig (MGCR). The gas pressure is reduced to 285 psig before being fed into a candle filter vessel. The candle filter vessel houses four candle filters and multiple test coupons. The particulate free gas is then desulfurized in a sorbent reactor. Starting in 1996 the MGCR system will be able to regenerate the sorbent in the same vessel.

  18. Micro-toughened titanium-based intermetallics for high-temperature service. CRADA final report

    SciTech Connect

    Sikka, V.K.; Liu, C.T.; Blue, C.A.

    1997-11-01

    This Cooperative Research and Development Agreement (CRADA) report deals with the composition development, processing parameter development, microstructural evaluation, and mechanical properties development of the {beta} TiAl alloys. Two series of alloy compositions were identified. The first series consisted of four alloys, and the second series consisted of three alloys. The powders were packed in titanium cans, evacuated, and sealed. The titanium cans were hot extruded at 1150, 1250, and 1400{degrees}C to an area reduction ratio of 16:1. The extruded bars were heat treated between 800 and 1320{degrees}C, and their microstructure characterized in the extended and heat-treated condition by optical, scanning, and transmission electron microscopy (TEM). The microstructural features such as colony size, width of colony boundary {beta} layer, interlamellar spacing, {alpha}{sub 2}-{alpha}{sub 2} spacing, {beta}lamellar width, and {alpha}{sub 2}-{beta} layer ratio were quantified. Tensile bars were prepared from the extruded bars by electrodischarge machining followed by grinding. Tensile tests were conducted from room temperature to 1000{degrees}C. Three-point-bend tests were used to measure the fracture toughness at both room temperature and 800{degrees}C. The effect of long-term annealing at 800 and 1000{degrees}C on one of the alloys was measured at room temperature. Tensile properties of the alloys of this study were compared with the data reported in literature.

  19. Alzeta porous radiant burner. CRADA final report

    SciTech Connect

    1995-12-01

    An Alzeta Pyrocore porous radiant burner was tested for the first time at elevated pressures and mass flows. Mapping of the burner`s stability limits (flashback, blowoff, and lean extinction limits) in an outward fired configuration and hot wall environment was carried out at pressures up to 18 atm, firing rates up to 180 kW, and excess air rates up to 100%. A central composite experimental design for parametric testing within the stability limits produced statistically sound correlations of dimensionless burner temperature and NO{sub x} emissions as functions of equivalence ratio, dimensionless firing rate, and reciprocal Reynolds number. The NO{sub x} emissions were below 4 ppmvd at 15% O{sub 2} for all conditions tested, and the CO and unburned hydrocarbon levels were simultaneously low. As a direct result of this cooperative research effort between METC and Alzeta, Solar Turbines has already expressed a strong interest in this novel technology.

  20. Design and fabrication of a prototype sensor system for waste storage tank characterization. CRADA final report for CRADA Number ORNL92-0094

    SciTech Connect

    Burks, B.L.; Wagner, J.

    1994-12-08

    On February 15--16 1994, ORNL and MTI presented a technology demonstration showcasing the results of a CRADA between the two organizations. The CRADA project entailed design and development of a structured light mapping system suitable for deployment in underground waste storage tanks. The CRADA expanded upon a system previously designed and deployed at the DOE Fernald site by ORNL. Enhancements in the new system include: a factor of ten increase in mapping speed; radiation and environmental hardening sufficient for use in the Hanford single-shell tanks (up to 5,000 rad/hr, pH = 12, high heat, etc.); capability to map and display data for both vertical surfaces, such as pipes, and horizontal surfaces; rugged, compact design that can be deployed through a ten centimeter riser; and a design that can be decontaminated easily after deployment.

  1. WindFloat Feasibility Study Support. Cooperative Research and Development Final Report, CRADA Number CRD-11-419

    SciTech Connect

    Sirnivas, Senu

    2015-05-07

    This shared resource CRADA defines research collaborations between the National Renewable Energy Laboratory and Principle Power, Inc. and its subsidiaries (“Principle Power”). Under the terms and conditions described in this CRADA agreement, NREL and Principle Power will collaborate on the DEMOWFLOAT project, a full-scale 2-MW demonstration project of a novel floating support structure for large offshore wind turbines, called WindFloat. The purpose of the project is to demonstrate the longterm field performance of the WindFloat design, thus enabling the future commercialized deployment of floating deepwater offshore wind power plants. NREL is the leading U.S. Department of Energy (DOE) laboratory for the development and advancement of renewable energy and has a strong interest in offshore wind and the development of deepwater offshore wind systems. NREL will provide expertise and resources to the DEMOWFLOAT project in assessing the environmental impacts, independent technical performance validation, and engineering analysis. Principle Power is a Seattle, Washington-based renewable energy company that owns all the intellectual property associated with the WindFloat. In return for NREL’s support of the DEMOWFLOAT project, Principle Power will provide NREL with valuable test data from the project that will be used to validate the numerical tools developed by NREL for analyzing offshore wind turbines. In addition, NREL will gain experience and knowledge in offshore wind designs and testing methods through this collaboration. 2 This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. NREL and Principle Power will work together to advance floating offshore wind technology, and demonstrate its viability for supplying the world with a new clean energy source.

  2. The final technical report of the CRADA, 'Medical Accelerator Technology'

    SciTech Connect

    Chu, W.T.; Rawls, J.M.

    2000-06-12

    Under this CRADA, Berkeley Lab and the industry partner, General Atomics (GA), have cooperatively developed hadron therapy technologies for commercialization. Specifically, Berkeley Lab and GA jointly developed beam transport systems to bring the extracted protons from the accelerator to the treatment rooms, rotating gantries to aim the treatment beams precisely into patients from any angle, and patient positioners to align the patient accurately relative to the treatment beams. We have also jointly developed a patient treatment delivery system that controls the radiation doses in the patient, and hardware to improve the accelerator performances, including a radio-frequency ion source and its low-energy beam transport (LEBT) system. This project facilitated the commercialization of the DOE-developed technologies in hadron therapy by the private sector in order to improve the quality of life of the nation.

  3. Final report for the Tera Computer TTI CRADA

    SciTech Connect

    Davidson, G.S.; Pavlakos, C.; Silva, C.

    1997-01-01

    Tera Computer and Sandia National Laboratories have completed a CRADA, which examined the Tera Multi-Threaded Architecture (MTA) for use with large codes of importance to industry and DOE. The MTA is an innovative architecture that uses parallelism to mask latency between memories and processors. The physical implementation is a parallel computer with high cross-section bandwidth and GaAs processors designed by Tera, which support many small computation threads and fast, lightweight context switches between them. When any thread blocks while waiting for memory accesses to complete, another thread immediately begins execution so that high CPU utilization is maintained. The Tera MTA parallel computer has a single, global address space, which is appealing when porting existing applications to a parallel computer. This ease of porting is further enabled by compiler technology that helps break computations into parallel threads. DOE and Sandia National Laboratories were interested in working with Tera to further develop this computing concept. While Tera Computer would continue the hardware development and compiler research, Sandia National Laboratories would work with Tera to ensure that their compilers worked well with important Sandia codes, most particularly CTH, a shock physics code used for weapon safety computations. In addition to that important code, Sandia National Laboratories would complete research on a robotic path planning code, SANDROS, which is important in manufacturing applications, and would evaluate the MTA performance on this code. Finally, Sandia would work directly with Tera to develop 3D visualization codes, which would be appropriate for use with the MTA. Each of these tasks has been completed to the extent possible, given that Tera has just completed the MTA hardware. All of the CRADA work had to be done on simulators.

  4. CRADA final report for CRADA number Y1294-0296: Optical particulate emission monitor

    SciTech Connect

    Miller, A.C. Jr.; Bernacki, E.; Nuspliger, R.J.

    1995-10-15

    The Oak Ridge Centers for Manufacturing Technology (ORCMT) and Environmental Systems Corporation (ESC) have collaborated on an effort to develop the optical system for an enhanced particulate emission monitor. The purpose of this effort was to assist a small East Tennessee company in perfecting an instrument that would meet or exceed the performance of competing foreign instruments and provide measurement capabilities necessary to assure compliance of Department of Energy facilities and other industrial facilities with expected EPA regulations. The two parties collaborated on design, assembly, and bench testing of the prototype instrument. The prototype system was targeted to have the capability for measuring micron size particles in concentrations as low as 10 micrograms per cubic meter and to have the added benefit of improving sampling statistics (i.e. measurements will be made over larger regions of the stack) over current instruments. Project deliverables were a prototype optical system and characterization data.

  5. Molecular engineering of polymer alloys: A final report of results obtained on CRADA No. 1078

    SciTech Connect

    Curro, J.G.; Schweizer, K.S.; Honeycutt, J.D.

    1995-12-01

    This report summarizes the technical progress made in the past three years on CRADA No. 1078, Molecular Engineering of Polymer Alloys. The thrust of this CRADA was to start with the basic ideas of PRISM theory and develop it to the point where it could be applied to modeling of polymer alloys. In this program, BIOSYM, Sandia and the University of Illinois worked jointly to develop the theoretical techniques and numerical formalisms necessary to implement the theoretical ideas into commercial software aimed at molecular engineering of polymer alloys. This CRADA focused on developing the techniques required to make the transition from theory to practice. These techniques were then used by BIOSYM to incorporate PRISM theory and other new developments into their commercial software.

  6. Integrated Biorefinery Project: Cooperative Research and Development Final Report, CRADA Number CRD-10-390

    SciTech Connect

    Chapeaux, A.; Schell, D.

    2013-06-01

    The Amyris-NREL CRADA is a sub-project of Amyris?s DOE-funded pilot-scale Integrated Biorefinery (IBR). The primary product of the Amyris IBR is Amyris Renewable Diesel. Secondary products will include lubricants, polymers and other petro-chemical substitutes. Amyris and its project partners will execute on a rapid project to integrate and leverage their collective expertise to enable the conversion of high-impact biomass feedstocks to these advanced, infrastructure-compatible products. The scope of the Amyris-NREL CRADA includes the laboratory development and pilot scale-up of bagasse pretreatment and enzymatic saccharification conditions by NREL for subsequent conversion of lignocellulosic sugar streams to Amyris Diesel and chemical products by Amyris. The CRADA scope also includes a techno-economic analysis of the overall production process of Amyris products from high-impact biomass feedstocks.

  7. CRADA Final Report for CRADA Number ORNL00-0605: Advanced Engine/Aftertreatment System R&D

    SciTech Connect

    Pihl, Josh A; West, Brian H; Toops, Todd J; Adelman, Brad; Derybowski, Edward

    2011-10-01

    Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT), also known as NOx adsorber catalyst regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy. Under full-load, rated speed conditions, injection of fuel upstream of the DOC reduced the fuel penalty for a given level of NOx reduction by 10-20%. GC-MS showed that fuel compounds were 'cracked' into smaller hydrocarbon species over the DOC, particularly light alkenes. GC-MS analysis of HC species entering and exiting the LNT showed high utilization of light alkenes, followed by mono-aromatics; branched alkanes passed through the LNT largely unreacted. Follow-on experiments at a 'road load' condition were conducted, revealing that the NOx reduction was better without the DOC at lower temperatures. The improved performance was attributed to the large swings in the NOx adsorber core temperature. Split-injection experiments were conducted with ultra-low sulfur diesel fuel and three pure HC compounds: 1-pentene, toluene, and iso-octane. The pure compound experiments

  8. Rapid scanning mass spectrometer. Final CRADA report for CRADA Number Y-1295-0394

    SciTech Connect

    Leckey, J.H.; Boeckmann, M.D.

    1997-02-24

    This Cooperative Research and Development Agreement was used to modify Vacuum Technology`s AERO VAC computer/mass spectrometer interface and electronics to allow the mass spectrometer to acquire rapid scans. The computer interface sends signals from the PC to the mass spectrometer, controlling its filament, giving scan instructions, and selecting the proper electrometer range, and detector. It then receives the detector output in the form of amplified digital signals from the electrometer. This project performed the following three upgrades on the computer interface and electronics. (1) A new electrometer was designed and built to process the signal from the detector. This new electrometer is more sensitive, over 10 times faster, and over 100 times more stable than the electrometer it will have replaced. (2) The controller EPROM was reprogrammed with new firmware. This firmware acts as an operating system for the interface and is used to shuttle communications between the PC and the AERO VAC mass spectrometer. The new firmware allows digital signals to be transmitted considerably faster to and from the mass spectrometer than the old firmware. The voltage regulator which causes the ion selector voltage to ramp to allow ions of selected mass to be sequentially detected was redesigned and prototyped. The redesign allowed obsolete electronics in the regulator circuitry to be replaced with more efficient circuitry. The redesigned voltage regulator can be ramped up or down more than 100 times faster than the existing regulator. Figure 4 shows a picture of the prototype voltage regulator circuit. These changes were incorporated into a prototype unit and preliminary performance testing conducted. Results indicated that scanning speed was significantly increased over the unmodified version.

  9. Development of a High Volume Capable Process to Manufacture High Performance Photovoltaic Cells: Cooperative Research and Development Final Report, CRADA Number CRD-08-322

    SciTech Connect

    Geisz, J. F.

    2012-11-01

    The intent of the work is for RFMD and NREL to cooperate in the development of a commercially viable and high volume capable process to manufacture high performance photovoltaic cells, based on inverted metamorphic (IMM) GaAs technology. The successful execution of the agreement will result in the production of a PV cell using technology that is capable of conversion efficiency at par with the market at the time of release (reference 2009: 37-38%), using RFMD's production facilities. The CRADA work has been divided into three phases: (1) a foundation phase where the teams will demonstrate the manufacturing of a basic PV cell at RFMD's production facilities; (2) a technology demonstration phase where the teams will demonstrate the manufacturing of prototype PV cells using IMM technology at RFMD's production facilities, and; (3) a production readiness phase where the teams will demonstrate the capability to manufacture PV cells using IMM technology with high yields, high reliability, high reproducibility and low cost.

  10. Laboratory Testing of the Boundary Layer Momentum Transfer Rotational Filter Systems, NETL-Innovatech, Inc., CRADA 98-F026, Final Report

    SciTech Connect

    National Energy Technology Laboratory

    2000-08-22

    A patented dynamic mechanical filter developed by InnovaTech was previously shown to remove fine particulate matter from industrial process gas streams at ambient temperatures and pressures. An all-metal, high-temperature version of this novel media-less filter was fabricated under this Cooperative Research and Development Agreement (CRADA) with DOE/NETL-Morgantown for hot gas testing of the device. The technology is entirely different in both concept and design from conventional vortex separators, cyclones, or porous media filters. This new filtration concept is capable of separating heavy loading of fine particles without blinding, fouling or bridging, and would require minimal operational costs over its anticipated multi-year service life. The all-metal filter design eliminates thermal stress cracking and premature failure prevalent in conventional porous ceramic filters. In contrast, conventional porous media filters (i.e., ceramic cross-flow or candles) easily foul, require periodic cleaning (typically backpulsing), frequent replacement and subsequent disposal.

  11. Development of lifetime test procedure for powder evacuated panel insulation. CRADA final report

    SciTech Connect

    Wilkes, K E; Graves, R S; Childs, K W

    1996-03-01

    This CRADA is between Appliance Research Consortium (ARC) of the Association of Home Appliance Manufacturers (AHAM) and the Lockheed Martin Energy Research Corp. A Powder Evacuated Panel (PEP) is a "super" thermal insulation, having a thermal resistivity (R) substantially above that of existing insulation without the environmental problems of some insulations such as Chlorofluorocarbon (CFC) blown foam.

  12. Supply of purified Th228 for Ra224 generators. Final CRADA Report .

    SciTech Connect

    Ehst, D. A.; Nuclear Engineering Division

    2009-10-02

    CRADA was terminated when it was determined that the Russians could not perform the terms of the subcontract. It became apparent that the Russians would not be a reliable source of Th228, as a precursor in the decay chain which leads to Ra224. Their government policies will prohibit the export of Th228 in quantities needed for commercial cancer therapy.

  13. Cassini launch contingency effort

    NASA Astrophysics Data System (ADS)

    Chang, Yale; O'Neil, John M.; McGrath, Brian E.; Heyler, Gene A.; Brenza, Pete T.

    2002-01-01

    On 15 October 1997 at 4:43 AM EDT, the Cassini spacecraft was successfully launched on a Titan IVB/Centaur on a mission to explore the Saturnian system. It carried three Radioisotope Thermoelectric Generators (RTGs) and 117 Light Weight Radioisotope Heater Units (LWRHUs). As part of the joint National Aeronautics and Space Administration (NASA)/U.S. Department of Energy (DoE) safety effort, a contingency plan was prepared to address the unlikely events of an accidental suborbital reentry or out-of-orbital reentry. The objective of the plan was to develop procedures to predict, within hours, the Earth impact footprints (EIFs) for the nuclear heat sources released during the atmospheric reentry. The footprint predictions would be used in subsequent notification and recovery efforts. As part of a multi-agency team, The Johns Hopkins University Applied Physics Laboratory (JHU/APL) had the responsibility to predict the EIFs of the heat sources after a reentry, given the heat sources' release conditions from the main spacecraft. (No ablation burn-through of the heat sources' aeroshells was expected, as a result of earlier testing.) JHU/APL's other role was to predict the time of reentry from a potential orbital decay. The tools used were a three degree-of-freedom trajectory code, a database of aerodynamic coefficients for the heat sources, secure links to obtain tracking data, and a high fidelity special perturbation orbit integrator code to predict time of spacecraft reentry from orbital decay. In the weeks and days prior to launch, all the codes and procedures were exercised. Notional EIFs were derived from hypothetical reentry conditions. EIFs predicted by JHU/APL were compared to those by JPL and US SPACECOM, and were found to be in good agreement. The reentry time from orbital decay for a booster rocket for the Russian Progress M-36 freighter, a cargo ship for the Mir space station, was predicted to within 5 minutes more than two hours before reentry. For the

  14. REGIONAL MANUFACTURING TECHNICAL DEVELOPMENT

    SciTech Connect

    EASON, H.A.

    1997-02-21

    This project covers four CRADAS (Cooperative Research and Development Agreements) which were initiated in 1991 and 1993. The two CRADAS with the state of Tennessee and the state of Florida were to provide technical assistance to small manufacturers in those states and the CRADA with the Tennessee Technology Foundation was to engage in joint economic development activities within the state. These three CRADAS do not fit the traditional definition of CRADAS and would be administered by other agreement mechanisms, today. But in these early days of technology transfer efforts, the CRADA mechanism was already developed and usable. The CRADA with Coors Ceramics is a good example of a CRADA and was used to develop nondestructive testing technology for ceramic component inspection. The report describes the background of this project, its economic impact, and its benefits to the U. S. Department of Energy.

  15. Development of YBCO Superconductor for Electric Systems: Cooperative Research and Development Final Report, CRADA Number CRD-04-150

    SciTech Connect

    Bhattacharya, R.

    2013-03-01

    The proposed project will be collaborative in exploration of high temperature superconductor oxide films between SuperPower, Inc. and the National Renewable Energy Laboratory. This CRADA will attempt to develop YBCO based high temperature oxide technology.

  16. National Security Science and Technology Initiative: Air Cargo Screening, Final Report for CRADA Number NFE-07-01081

    SciTech Connect

    Bingham, Philip; Bush, John; Bowerman, Biays; Cespedes, Ernesto; White, Timothy

    2004-12-01

    The non-intrusive inspection (NII) of consolidated air cargo carried on commercial passenger aircraft continues to be a technically challenging, high-priority requirement of the Department of Homeland Security’s Science and Technology Directorate (DHS S&T), the Transportation Security Agency and the Federal Aviation Administration. The goal of deploying a screening system that can reliably and cost-effectively detect explosive threats in consolidated cargo without adversely affecting the flow of commerce will require significant technical advances that will take years to develop. To address this critical National Security need, the Battelle Memorial Institute (Battelle), under a Cooperative Research and Development Agreement (CRADA) with four of its associated US Department of Energy (DOE) National Laboratories (Oak Ridge, Pacific Northwest, Idaho, and Brookhaven), conducted a research and development initiative focused on identifying, evaluating, and integrating technologies for screening consolidated air cargo for the presence of explosive threats. Battelle invested $8.5M of internal research and development funds during fiscal years 2007 through 2009.

  17. CRADA Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites

    SciTech Connect

    Janke, C.J.

    2005-10-17

    Electron beam (EB) curing is a technology that promises, in certain applications, to deliver lower cost and higher performance polymer matrix composite (PMC) structures compared to conventional thermal curing processes. PMCs enhance performance by making products lighter, stronger, more durable, and less energy demanding. They are essential in weight- and performance-dominated applications. Affordable PMCs can enhance US economic prosperity and national security. US industry expects rapid implementation of electron beam cured composites in aircraft and aerospace applications as satisfactory properties are demonstrated, and implementation in lower performance applications will likely follow thereafter. In fact, at this time and partly because of discoveries made in this project, field demonstrations are underway that may result in the first fielded applications of electron beam cured composites. Serious obstacles preventing the widespread use of electron beam cured PMCs in many applications are their relatively poor interfacial properties and resin toughness. The composite shear strength and resin toughness of electron beam cured carbon fiber reinforced epoxy composites were about 25% and 50% lower, respectively, than those of thermally cured composites of similar formulations. The essential purpose of this project was to improve the mechanical properties of electron beam cured, carbon fiber reinforced epoxy composites, with a specific focus on composite shear properties for high performance aerospace applications. Many partners, sponsors, and subcontractors participated in this project. There were four government sponsors from three federal agencies, with the US Department of Energy (DOE) being the principal sponsor. The project was executed by Oak Ridge National Laboratory (ORNL), NASA and Department of Defense (DOD) participants, eleven private CRADA partners, and two subcontractors. A list of key project contacts is provided in Appendix A. In order to properly

  18. Advanced variable speed air source integrated heat pump (AS-IHP) development - CRADA final report

    SciTech Connect

    Baxter, Van D.; Rice, C. Keith; Munk, Jeffrey D.; Ally, Moonis Raza; Shen, Bo

    2015-09-30

    Between August 2011 and September 2015, Oak Ridge National Laboratory (ORNL) and Nordyne, LLC (now Nortek Global HVAC LLC, NGHVAC) engaged in a Cooperative Research and Development Agreement (CRADA) to develop an air-source integrated heat pump (AS-IHP) system for the US residential market. Two generations of laboratory prototype systems were designed, fabricated, and lab-tested during 2011-2013. Performance maps for the system were developed using the latest research version of the DOE/ORNL Heat Pump Design Model, or HPDM, (Rice 1991; Rice and Jackson 2005; Shen et al 2012) as calibrated against the lab test data. These maps were the input to the TRNSYS (SOLAR Energy Laboratory, et al, 2010) system to predict annual performance relative to a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (combination of 13 SEER air-source heat pump (ASHP) and resistance water heater with Energy Factor (EF) of 0.9). Predicted total annual energy savings, while providing space conditioning and water heating for a tight, well insulated 2600 ft2 (242 m2) house at 5 U.S. locations, ranged from 46 to 61%, averaging 52%, relative to the baseline system (lowest savings at the cold-climate Chicago location). Predicted energy use for water heating was reduced 62 to 76% relative to resistance WH. Based on these lab prototype test and analyses results a field test prototype was designed and fabricated by NGHVAC. The unit was installed in a 2400 ft2 (223 m2) research house in Knoxville, TN and field tested from May 2014 to April 2015. Based on the demonstrated field performance of the AS-IHP prototype and estimated performance of a baseline system operating under the same loads and weather conditions, it was estimated that the prototype would achieve ~40% energy savings relative to the minimum efficiency suite. The estimated WH savings were >60% and SC mode savings were >50%. But estimated SH savings were only about 20%. It is believed that had the test

  19. Phase II CRADA ORNL99-0568 Report : Developing Transmission-Less Inverter Drive Systems for Axial-Gap Permanent magnet Accessory and Traction Motors and Generators

    SciTech Connect

    McKeever, J.W.

    2001-08-06

    Researchers of the Oak Ridge National Laboratory's (ORNLs) Power Electronics and Electric Machine Research Center (PEEMRC) collaborated with Visual Computing Systems (VCS) to develop an electric axial-gap permanent magnet (PM) motor controlled by a self-sensing inverter for driving vehicle accessories such as power steering, air conditioning, and brakes. VCS designed an 8 kW motor based on their Segmented Electromagnetic Array (SEMA) technology. ORNL designed a 10 kW inverter to fit within the volume of a housing, which had been integrated with the motor. This modular design was pursued so that multiple modules could be used for higher power applications. ORNL built the first inverter under the cooperative research and development agreement (CRADA) ORNL 98-0514 and drove a refurbished Delta motor with no load during the Merit Review at ORNL on Monday, May 17, 1999. Inverter circuitry and instructions for assembling the inverters were sent to VCS. A report was prepared and delivered during the Future Car Congress in April 2000, at Arlington, Virginia. Collaboration continued under CRADA ORNL 99-0568 as VCS designed and built a SEMA motor with a dual coil platter to be the traction motor for an electric truck. VCS and ORNL assembled two 45 kW inverters. Each inverter drove one coil, which was designed to deliver 15 kW continuous power and 45 kW peak power for 90 s. The vehicle was road tested as part of the Future Truck Competition. A report was prepared and delivered during the PCIM in October 2000, at Boston, Massachusetts.

  20. Centralized Cryptographic Key Management and Critical Risk Assessment - CRADA Final Report For CRADA Number NFE-11-03562

    SciTech Connect

    Abercrombie, R. K.; Peters, Scott

    2014-05-28

    The Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) Cyber Security for Energy Delivery Systems (CSEDS) industry led program (DE-FOA-0000359) entitled "Innovation for Increasing Cyber Security for Energy Delivery Systems (12CSEDS)," awarded a contract to Sypris Electronics LLC to develop a Cryptographic Key Management System for the smart grid (Scalable Key Management Solutions for Critical Infrastructure Protection). Oak Ridge National Laboratory (ORNL) and Sypris Electronics, LLC as a result of that award entered into a CRADA (NFE-11-03562) between ORNL and Sypris Electronics, LLC. ORNL provided its Cyber Security Econometrics System (CSES) as a tool to be modified and used as a metric to address risks and vulnerabilities in the management of cryptographic keys within the Advanced Metering Infrastructure (AMI) domain of the electric sector. ORNL concentrated our analysis on the AMI domain of which the National Electric Sector Cyber security Organization Resource (NESCOR) Working Group 1 (WG1) has documented 29 failure scenarios. The computational infrastructure of this metric involves system stakeholders, security requirements, system components and security threats. To compute this metric, we estimated the stakes that each stakeholder associates with each security requirement, as well as stochastic matrices that represent the probability of a threat to cause a component failure and the probability of a component failure to cause a security requirement violation. We applied this model to estimate the security of the AMI, by leveraging the recently established National Institute of Standards and Technology Interagency Report (NISTIR) 7628 guidelines for smart grid security and the International Electrotechnical Commission (IEC) 63351, Part 9 to identify the life cycle for cryptographic key management, resulting in a vector that assigned to each stakeholder an estimate of their average loss in terms of dollars per day of system

  1. FY2011 Progress Report: Agreement 8697 - NOx Sensor Development

    SciTech Connect

    Woo, L Y; Glass, R S

    2011-11-01

    different concentration regimes obtained from bench-level laboratory evaluation were used to adjust the sensor signal in dynamometer testing. Both NO{sub x} and O{sub 2} exhibited non-linear responses over the concentration regimes examined (0-100 ppm for NO{sub x} and 4-7% for O{sub 2}). Adjusted sensor signals had better agreement with both a commercial NO{sub x} sensor and FTIR measurements. However, the lack of complete agreement indicated that it was not possible to completely account for the nonlinear sensor behavior in certain concentration regimes. The agreement at lower NO{sub x} levels (less than 20 ppm) was better than at higher levels (50-100 ppm). Other progress in FY2011 included dynamometer testing of sensors with imbedded heaters and protective housings that were mounted directly into the exhaust manifold. Advanced testing protocols were used to evaluate the sensors. These experiments confirmed the potential for sensor robustness and durability. Advanced material processing methods appropriate for mass manufacturing, such as sputtering, are also being evaluated. A major milestone for this past year was the licensing of the LLNL NO{sub x} sensor technology to EmiSense Technologies, LLC. EmiSense has extensive experience and resources for the development of emission control sensors. A CRADA is in development that will allow LLNL to work in partnership with EmiSense to bring the LLNL NO{sub x} sensor technology to commercialization. Ford Motor Company is also a partner in this effort.

  2. CRADA 2009S001: Investigation of the Supercondcuting RF Properties of Large Grain Ingot Niobium

    SciTech Connect

    Grimm, Terry; Hollister, Jerry L.; Kolka, Ahren; Myneni, Ganapati Rao

    2012-12-18

    This CRADA intended to explore the properties of large grain ingot niobium by fabricating four single cell TESLA shaped accelerating cavities. Once the cavities were fabricated, SRF performance would be measured. Niowave received four discs of large grain ingot niobium from JLAB in February 2009. Niowave cut samples from each disc and tested the RRR. After the RRR was measured with disappointing results, the project lost interest. A no cost extension was signed in July 2009 to allow progress until June 2010, but ultimately no further work was accomplished by either party. No firm conclusions were drawn, as further investigations were not made. Large grain ingot niobium has shown real potential for high accelerating gradient superconducting cavities. However, this particular CRADA did not gather enough data to reach any conclusions in this regard.

  3. NASA Efforts on Nanotechnology

    NASA Technical Reports Server (NTRS)

    Miranda, Felix A.

    2003-01-01

    An overview of the field of nanotechnology within the theme of "New efforts in Nanotechnology Research," will be presented. NASA's interest, requirements and current efforts in this emerging field will be discussed. In particular, NASA efforts to develop nanoelectronic devices, fuel cells, and other applications of interest using this novel technology by collaborating with academia will be addressed. Progress on current collaborations in this area with the University of Puerto Rico will be highlighted.

  4. Technology transfer opportunities: partnership opportunities available at the USGS

    USGS Publications Warehouse

    ,

    1996-01-01

    The following are USGS research projects offering an opportunity for Cooperative Research and Development Agreement (CRADA) partnerships. A CRADA is an agreement between one or more Federal agencies and one or more non-Federal agencies to work together in research or developmental activities. CRADAs permit both partners to share information in a protected environment and offer incentives to the non-Federal partner(s) to commercialize the resulting product of the effort.

  5. JouleLabs Cooperative Research and Development Agreement: Cooperative Research and Development Final Report, CRADA Number CRD-08-00301

    SciTech Connect

    Bilello, D.

    2010-08-01

    The National Renewable Energy Laboratory (NREL) and Joule Labs Inc. (Joule Labs) will collaborate on creating a software platform for the development and distribution of renewable energy and energy efficiency analysis tools.

  6. Limiting technology by negotiated agreement

    SciTech Connect

    Carnesale, A.

    1983-01-01

    The author concentrates on anti-ballistic missile (ABM) systems as an example of a continuing effort to limit technology by negotiated agreement. He first discusses the ABM treaty of 1972, ratified by both the US and the USSR. Afterwards, he briefly treats each of the following: ballistic missile defense (BMD) dilemmas; nature of the BMD choice; technology; economics; deterrence; nuclear warfighting; relations with allies; arms control; Star Wars; and on limiting technology.

  7. Agreement among 2 x 2 Agreement Indices.

    ERIC Educational Resources Information Center

    Conger, Anthony J.; Ward, David G.

    1984-01-01

    Sixteen measures of reliability for two-category nominal scales are compared. Upon correcting for chance agreement, there are only five distinct indices: Fleiss's modification of A-sub-1, the phi coefficient, Cohen's kappa, and two intraclass coefficients. Recommendations for choosing an agreement index are made based on definitions, magnitude,…

  8. Sexual Agreements among Gay Male Couples

    PubMed Central

    Hoff, Colleen H.; Beougher, Sean C.

    2009-01-01

    Many gay male couples make agreements about whether or not to permit sex with outside partners, yet little is known about the development and maintenance of these agreements, their impact on relationships, and whether they are an effective HIV prevention strategy. Using semi-structured, qualitative interviews, 39 gay male couples were asked about their sexual agreements and about other relationship dynamics that might affect their agreements. Analysis revealed a wide range of agreement types, all of which are presented along a continuum rather than as discrete categories. For couples with open agreements, most placed rules or conditions limiting when, where, how often, and with whom outside sex was permitted. Although motivations for having agreements varied, HIV prevention did not rank as a primary factor for any couple. Most couples had congruous agreements; however, a small number reported discrepancies which may increase HIV transmission risk. How couples handled breaks in their agreements also varied, depending on what condition was broken, whether it was disclosed, and the partner's reaction. Additional results include differences in agreement type and motivations for having an agreement based on couple serostatus. Overall, agreements benefited couples by providing boundaries for the relationship, supporting a non-heteronormative identity, and fulfilling the sexual needs of the couple. Future prevention efforts involving gay couples must address the range of agreement types and the meanings couples ascribe to them, in addition to tempering safety messages with the relationship issues that are important to and faced by gay couples. PMID:18686027

  9. Army thermophotovoltaic efforts

    NASA Astrophysics Data System (ADS)

    Kruger, John S.; Guazzoni, Guido; Nawrocki, Selma J.

    1999-03-01

    A presentation and description of the several efforts in Thermophotovoltaic (TPV) Energy Conversion for power generation supported/monitored by the Army is provided with their more recent technical status and results. The efforts are related to small business (SBIR, STTR) contracts, academic research grants (MURI), and contracts awarded as the result of specialized solicitations. This paper covers a number of Army potential uses of the TPV power generation and is an attempt to give a more cohesive and integrated picture of the various military interests in TPV. With the exception of low power (<10 W) units, all Army potential uses of TPV power sources will demand operation with logistically available fuels.

  10. DEDALOS NREL: Cooperative Research and Development Final Report, CRADA Number CRD-07-237

    SciTech Connect

    Friedman, D.

    2013-06-01

    Currently High Concentration Photovoltaic (HCPV) terrestrial modules are based on the combination of optic elements that concentrate the sunlight into much smaller GaAs space cells to produce electricity. GaAs cell technology has been well developed for space applications during the last two decades, but the use of GaAs cells under concentrated sunlight in terrestrial applications leaves unanswered questions about performance, durability and reliability. The work to be performed under this CRADA will set the basis for the design of high-performance, durable and reliable HCPV terrestrial modules that will bring down electricity production costs in the next five years.

  11. Rhenium labeled peptides and antibodies for cancer therapy. CRADA final report

    SciTech Connect

    Knapp, Jr., F. F.; Rhodes, B. A.

    1996-08-12

    This CRADA involved development of optimal methods for attachment of rhenium radioisotopes to antibodies and peptides which can be used for cancer treatment. Rhenium-186 and the tungsten-188/rhenium-188 generators were provided from ORNL to RhoMed for peptide labeling studies. The rhenium-186 and carrier-free rhenium-188 were then used to optimize the labeling of various small peptides....A system has been developed at ORNL which provides the rhenium-188 radioisotope, which has excellent therapeutic properties for cancer treatment.

  12. Prevention of iron-sulfide deposition in petroleum processing. Final CRADA report.

    SciTech Connect

    Doctor, R. D.; Panchal, C. B.; Energy Systems

    2010-03-25

    The purpose of this CRADA extension which effectively ended in 2003 was to quantify the effect of iron-sulfide formation on the fouling propensity of crude oil. The specific objectives are focused on fouling of the Crude Distillation Unit (CDU-1) at the Shell Refinery in Mobile, Alabama. The technical approach consists of analyzing the plant data, chemical analysis of crude oil to detect key precursors, performing refinery tests using the Argonne Field Fouling Unit, and verifying the effectiveness of a physical device of tube insert and enhanced tubes to change threshold conditions and thereby reducing fouling.

  13. Measuring Cycling Effort.

    ERIC Educational Resources Information Center

    Jahnke, Thomas; Hamson, Mike

    1999-01-01

    Investigates the basic mechanics of cycling with a simple reckoning of how much effort is needed from the cyclist. The work done by the cyclist is quantified when the ride is on the flat and also when pedaling uphill. Proves that by making use of the available gears on a mountain bike, cycling uphill can be accomplished without pain. (Author/ASK)

  14. Electrical Characterization of Printed Nanocrystalline Silicon Films, Cooperative Research and Development Final Report, CRADA Number CRD-07-00241

    SciTech Connect

    Young, D.

    2011-05-01

    This CRADA helped Innovalight characterize and quantify their ink-based selective emitter technology. Controlled localized doping of selective emitter structures via Innovalight Silicon Ink technology was demonstrated. Both secondary ion mass spectrometry and scanning capacitance microscopy revealed; abrupt lateral dopant profiles at ink-printed boundaries. Uniform doping of iso- and pyramidal surfaces was also verified using scanning electron microscopy dopant contrast imaging.

  15. Ink Jet Printing for Silicon Photovoltaics: Cooperative Research and Development Final Report, CRADA Number CRD-04-00139

    SciTech Connect

    Ginley, D. S.

    2010-08-01

    The purpose of this CRADA was to combine the strengths of NREL and Evergreen Solar in the area of ink jet printing to develop a new manufacturing technology necessary to produce Si solar cells based on ribbon technology comparable to or exceeding current technologies.

  16. Metallization for Self Aligned Technology: Cooperative Research and Development Final Report, CRADA Number CRD-08-295

    SciTech Connect

    Ginley, D.

    2012-04-01

    In this CRADA NREL will modify/develop metallization inks that are compatible with 1366 Technologies technology. Various methods of deposition will be used to apply the inks to the textured silicon substrates. The goal of the project is to minimize the contact resistance while maximizing the cell efficiency.

  17. Buried Anode Device Development: Cooperative Research and Development Final Report, CRADA Number CRD-11-451

    SciTech Connect

    Tenent, R.

    2015-03-01

    The possibility of a reflecting electrochromic device is very attractive, and the 'Buried Anode' architecture developed at NREL could yield such a device. The subject of this cooperative agreement will be the development and refinement of a Buried Anode device process. This development will require the active involvement of NREL and US e-Chromic personnel, and will require the use of NREL equipment as much as possible. When this effort is concluded, US e-Chromic will have enough information to construct a pilot production line, where further development can continue.

  18. CRADA with Beckman Instruments and Pacific Northwest National Laboratory (PNL-013): Development and commercialization of the Unsaturated Flow Apparatus (UFA) using characterization of aridisols

    SciTech Connect

    Wright, J.; Conca, J.

    1996-10-01

    The objective of this Cooperative Research and Development Agreement (CRADA) was to develop and commercialize a technology conceived by scientists at Pacific Northwest National Laboratory (PNNL) and manufactured by Beckman Instruments, Inc. (Beckman), and to apply this technology to the characterization of and soils. The technology is the Unsaturated Flow Apparatus (UFA). The UFA provides a highly efficient method of direct, rapid measurement of hydraulic conductivity and other flow properties according to Darcy-Buckingham principles because the operator controls both the fluid driving force, using an ultracentrifuge, and the flow into the sample while it is spinning, with a rotating seal assembly. The concept of using centrifugation to significantly decrease the time needed, from years or months to days, for study of subsurface transport, particularly under unsaturated conditions, was conceived by James Conca, Ph.D., and Judith Wright, Ph.D., in 1986. The prototype UFA was developed in 1988 because there was a need to rapidly and accurately determine transport parameters in soils, sediments, and rocks for the Grout Waste Disposal Program. Transport parameters are critical to modeling outcomes for site-specific solutions to environmental remediation and waste disposal problems.

  19. CRADA Final Report: Application of Dual-Mode Invertor Control to Commercially Available Radial-Gap Permanent Magnet Motors - Vol. 1

    SciTech Connect

    Lawler, J.S.; McKeever, J.W.; Downing, M.E.; Stahlhut, R.D; Bremmer, R.; Shoemaker, J.M.; Seksarian, A.K.; Poore, B.; Lutz, J.

    2006-05-01

    John Deere and Company (Deere), their partner, UQM Technologies, Inc. (UQM), and the Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center (PEEMRC) recently completed work on the cooperative research and development agreement (CRADA) Number ORNL 04-0691 outlined in this report. CRADA 04-0691 addresses two topical issues of interest to Deere: (1) Improved characterization of hydrogen storage and heat-transfer management; and (2) Potential benefits from advanced electric motor traction-drive technologies. This report presents the findings of the collaborative examination of potential operational and cost benefits from using ORNL/PEEMRC dual-mode inverter control (DMIC) to drive permanent magnet (PM) motors in applications of interest to Deere. DMIC was initially developed and patented by ORNL to enable PM motors to be driven to speeds far above base speed where the back-electromotive force (emf) equals the source voltage where it is increasingly difficult to inject current into the motor. DMIC is a modification of conventional phase advance (CPA). DMIC's dual-speed modes are below base speed, where traditional pulse-width modulation (PWM) achieves maximum torque per ampere (amp), and above base speed, where six-step operation achieves maximum power per amp. The modification that enables DMIC adds two anti-parallel thyristors in each of the three motor phases, which consequently adds the cost of six thyristors. Two features evaluated in this collaboration with potential to justify the additional thyristor cost were a possible reduction in motor cost and savings during operation because of higher efficiency, both permitted because of lower current. The collaborative analysis showed that the reduction of motor cost and base cost of the inverter was small, while the cost of adding six thyristors was greater than anticipated. Modeling the DMIC control displayed inverter efficiency gains due to reduced current, especially under

  20. FFP/NREL Collaboration on Hydrokinetic River Turbine Testing: Cooperative Research and Development Final Report, CRADA Number CRD-12-00473

    SciTech Connect

    Driscoll, F.

    2013-04-01

    This shared resources CRADA defines collaborations between the National Renewable Energy Laboratory (NREL) and Free Flow Power (FFP) set forth in the following Joint Work Statement. Under the terms and conditions described in this CRADA, NREL and FFP will collaborate on the testing of FFP's hydrokinetic river turbine project on the Mississippi River (baseline location near Baton Rouge, LA; alternate location near Greenville, MS). NREL and FFP will work together to develop testing plans, instrumentation, and data acquisition systems; and perform field measurements.

  1. Navy superconductivity efforts

    NASA Technical Reports Server (NTRS)

    Gubser, D. U.

    1990-01-01

    Both the new high temperature superconductors (HTS) and the low temperature superconductors (LTS) are important components of Navy's total plan to integrate superconductivity into field operational systems. Fundamental research is an important component of the total Navy program and focuses on the HTS materials. Power applications (ship propulsion, etc.) use LTS materials while space applications (MMW electronics, etc.) use HTS materials. The Space Experiment being conducted at NRL will involve space flight testing of HTS devices built by industry and will demonstrate the ability to engineer and space qualify these devices for systems use. Another important component of the Navy's effort is the development of Superconducting Quantum Interference Device (SQUID) magnetometers. This program will use LTS materials initially, but plans to implement HTS materials as soon as possible. Hybrid HTS/LTS systems are probable in many applications. A review of the status of the Navy's HTS materials research is given as well as an update on the Navy's development efforts in superconductivity, with particular emphasis on the related SDIO sponsored program on HTS applications.

  2. Breckinridge Project, initial effort

    SciTech Connect

    None, None

    1982-09-01

    Report III, Volume 1 contains those specifications numbered A through J, as follows: General Specifications (A); Specifications for Pressure Vessels (C); Specifications for Tanks (D); Specifications for Exchangers (E); Specifications for Fired Heaters (F); Specifications for Pumps and Drivers (G); and Specifications for Instrumentation (J). The standard specifications of Bechtel Petroleum Incorporated have been amended as necessary to reflect the specific requirements of the Breckinridge Project, and the more stringent specifications of Ashland Synthetic Fuels, Inc. These standard specifications are available to the Initial Effort (Phase Zero) work performed by all contractors and subcontractors. Report III, Volume 1 also contains the unique specifications prepared for Plants 8, 15, and 27. These specifications will be substantially reviewed during Phase I of the project, and modified as necessary for use during the engineering, procurement, and construction of this project.

  3. Agreement, Shells, and Focus.

    ERIC Educational Resources Information Center

    Simpson, Andrew; Wu, Zoe

    2002-01-01

    Reconsiders development and licensing of agreement as a syntactic projection and argues for a productive developmental relation between agreement and the category of focus. Suggests that focus projections are initially selected by a variety of functional heads with real semantic content, then, over time decays into a simple concord shell. Upon…

  4. Non-Proliferation Agreements.

    ERIC Educational Resources Information Center

    Swalec, John J.

    1981-01-01

    Discusses five kinds of cooperative agreements established by the College of Lake County (IL): those with other community colleges/technical institutes; the military; business, industry, and organizations; secondary schools; and community and special interest groups. Pays particular attention to two kinds of agreements with other colleges. (CAM)

  5. Cooperative Agreements Study Report.

    ERIC Educational Resources Information Center

    Lawton, R. E.; Magruder, D.

    During the 1983 meeting of the Florida Legislature, action was taken to begin a systematic study of the level of cooperation between the Florida public schools K-12 program and the community and junior colleges. The goals and objectives of the Cooperative Agreements Study were to review and compile a list of the cooperative agreements and identify…

  6. The Helsinki Agreement

    ERIC Educational Resources Information Center

    Babel: Journal of the Australian Federation of Modern Language Teachers' Associations, 1977

    1977-01-01

    A reprint of sections of the Helsinki agreement dealing with foreign languages and civilization, and cooperation and exchanges in the field of education. The agreement supports wider knowledge of foreign languages and promotes exchanges, cooperation, lexicography, and specialized programs in adult education. (AMH)

  7. Breckinridge Project, initial effort

    SciTech Connect

    1982-01-01

    This report presents an overview of the Breckinridge Project and summarizes the results achieved during the development phase of the project performed under a Cooperative Agreement with the United States Department of Energy. The Breckinridge Project provides for the design, construction and operation of a 50,000 barrel per day coal liquefaction facility in Breckinridge County, Kentucky. The development of the basic technology used in the Breckinridge Project dates back to the late 1950's and the invention by Hydrocarbon Research, Inc., (HRI) of the ebullated-bed reactor and the H-OIL process. The H-COAL process is based on the H-OIL technology. This coal liquefaction process produces clean low-sulfur petroleum substitutes suitable for most types of hydrocarbon-based fuel and chemical uses regardless of the sulfur content of the coal. A large H-COAL Pilot Plant in operation at Catlettsburg, Kentucky, is converting 220 tons of coal per day into 600 barrels of distillate products by catalytic hydrogenation. The estimated capital cost of the commercial facility is $3.17 billion, and the associated out-of-pocket operating cost is $18 per barrel, both in January 1981 dollars. Financial analysis shows the project to be an attractive investment under certain leveraged conditions which are possible through the assistance of the Synthetic Fuels Corporation. Ashland Synthetic Fuels, Inc. is currently working with the Synthetic Fuels Corporation and potential partners to develop financing for the commercial venture. Critical permits are being obtained and an Environmental Impact Statement is being prepared pursuant to initiating site preparation in early 1983. Commercial operations are expected to start up in early 1988.

  8. Swedish nuclear waste efforts

    SciTech Connect

    Rydberg, J.

    1981-09-01

    After the introduction of a law prohibiting the start-up of any new nuclear power plant until the utility had shown that the waste produced by the plant could be taken care of in an absolutely safe way, the Swedish nuclear utilities in December 1976 embarked on the Nuclear Fuel Safety Project, which in November 1977 presented a first report, Handling of Spent Nuclear Fuel and Final Storage of Vitrified Waste (KBS-I), and in November 1978 a second report, Handling and Final Storage of Unreprocessed Spent Nuclear Fuel (KBS II). These summary reports were supported by 120 technical reports prepared by 450 experts. The project engaged 70 private and governmental institutions at a total cost of US $15 million. The KBS-I and KBS-II reports are summarized in this document, as are also continued waste research efforts carried out by KBS, SKBF, PRAV, ASEA and other Swedish organizations. The KBS reports describe all steps (except reprocessing) in handling chain from removal from a reactor of spent fuel elements until their radioactive waste products are finally disposed of, in canisters, in an underground granite depository. The KBS concept relies on engineered multibarrier systems in combination with final storage in thoroughly investigated stable geologic formations. This report also briefly describes other activities carried out by the nuclear industry, namely, the construction of a central storage facility for spent fuel elements (to be in operation by 1985), a repository for reactor waste (to be in operation by 1988), and an intermediate storage facility for vitrified high-level waste (to be in operation by 1990). The R and D activities are updated to September 1981.

  9. CRADA Final Report, 2011S003, Faraday Technologies

    SciTech Connect

    Faraday Technologies

    2012-12-12

    . Another potential benefit would be for the medical industry that uses hydrofluoric acid to electropolish niobium-alloy materials. The FARADAYICSM Electropolishing process will eliminate the environmental hazards posed by the use of hydrofluoric acid employed by chemical polishing and conventional electropolishing. Further, improved performance benefits may be possible. The overall objective of the Phase I program was to demonstrate that FARADAYIC Electropolishing of niobium cavities in electrolytes free of hydrofluoric acid can meet the RF superconducting performance criteria of those cavities. The FARADAYIC Electropolishing Process developed in the Phase I program was used to polish 50 mm Nb disks to a surface roughness (RA) of < 1 nm over a small area through process and post-processing optimization. An excellent level of surface cleanliness was achieved. While the desired 2K RF performance has not yet been achieved, Faraday believes that surface oxide state can be controlled through manipulation of the process parameters, to meet the 2K RF standard. Faraday is establishing apparatus and facilities infrastructure for single-cell SRF cavity electropolishing, through a synergistic effort with the Fermi National Accelerator Facility (Fermilab) to scale-up electropolishing of superconducting RF cavities. Faraday proposes to commercialize the subject technology via an IP based strategic relationship with a partner with established market channels within two primary commercialization avenues: 1) the superconducting particle accelerator community, 2) the medical device and implant market. Faraday will initially maintain Low Rate Initial Production capabilities for an application, but latterly seek a strategic partner who is solely dedicated to high rate production.

  10. Mobile Ocean Test Berth Support: Cooperative Research and Development Final Report, CRADA Number CRD-10-413

    SciTech Connect

    LiVecchi, Albert

    2015-12-01

    The Northwest National Marine Renewable Energy Center (NNMREC), headquartered at the Oregon State University, is establishing the capabilities to test prototype wave energy conversion devices in the ocean. This CRADA will leverage the technical expertise and resources at NREL in the wind industry and in ocean engineering to support and enhance the development of the NNMREC Mobile Ocean Test Berth (MOTB). This CRADA will provide direct support to NNMREC by providing design evaluation and review of the MOTB, developing effective protocols for testing of the MOTB and wave energy conversion devices in the ocean, assisting in the specification of appropriate instrumentation and data acquisition packages, and providing guidance on obtaining and maintaining A2LA (American Association for Laboratory Accreditation) accreditation.

  11. 10MW Class Direct Drive HTS Wind Turbine: Cooperative Research and Development Final Report, CRADA Number CRD-08-00312

    SciTech Connect

    Musial, W.

    2011-05-01

    This paper summarizes the work completed under the CRADA between NREL and American Superconductor (AMSC). The CRADA combined NREL and AMSC resources to benchmark high temperature superconducting direct drive (HTSDD) generator technology by integrating the technologies into a conceptual wind turbine design, and comparing the design to geared drive and permanent magnet direct drive (PMDD) wind turbine configurations. Analysis was accomplished by upgrading the NREL Wind Turbine Design Cost and Scaling Model to represent geared and PMDD turbines at machine ratings up to 10 MW and then comparing cost and mass figures of AMSC's HTSDD wind turbine designs to theoretical geared and PMDD turbine designs at 3.1, 6, and 10 MW sizes.

  12. Nondestructive testing of ceramic components: Cooperative research and development agreement completion report

    SciTech Connect

    Carpenter, D.A.; Dews, T.W.; Moyer, M.W.; Oakes, R.E.

    1994-12-22

    In a joint Cooperative Research and Development Agreement (CRADA) between Martin Marietta Energy Systems (MMES) and an industrial partner, Y-12 has been evaluating nondestructive evaluation (NDE) techniques to identify the quality of high strength aluminum oxide tubes used in laser applications. In Phase I, several NDE techniques were developed to inspect the tubes. In Phase II a correlation between detected defects, actual failure mode and strength of the tubes was developed. In Phase II the industrial partner supplied tubes manufactured under a variety of conditions and containing material defects expected from process control variations. The tubes were inspected at MMES utilizing a variety of available acoustic techniques. After inspection, ring tensile specimens were fabricated to determine the tensile strength. The data were evaluated utilizing Weibull statistics to determine the statistical impact of the defects upon strength and correlate the data with the nondestructive evaluations of the tubes and observed defect distribution.

  13. Solar Thermal Conversion of Biomass to Synthesis Gas: Cooperative Research and Development Final Report, CRADA Number CRD-09-00335

    SciTech Connect

    Netter, J.

    2013-08-01

    The CRADA is established to facilitate the development of solar thermal technology to efficiently and economically convert biomass into useful products (synthesis gas and derivatives) that can replace fossil fuels. NREL's High Flux Solar Furnace will be utilized to validate system modeling, evaluate candidate reactor materials, conduct on-sun testing of the process, and assist in the development of solar process control system. This work is part of a DOE-USDA 3-year, $1M grant.

  14. Cooperation on Lidar for Improved Wind Turbine Performance. Cooperative Research and Development Final Report, CRADA Number CRD-13-521

    SciTech Connect

    Fleming, Paul

    2015-05-12

    Research into the use of lidar for improved wind turbine performance is an area of considerable interest. Lidars have been proposed to analyze and improve wind turbine pitch control performance, yaw alignment and control performance, as well as to improve power curve assessments. In this CRADA, NREL, NRG Systems, Inc. (“NRG”) and Avent Lidar Technology SAS (“Avent”) will collaborate on testing these concepts.

  15. Boulder Wind Power Advanced Gearless Drivetrain: Cooperative Research and Development Final Report, CRADA Number CRD-12-00463

    SciTech Connect

    Cotrell, J.

    2013-04-01

    The Boulder Wind Power (BWP) Advanced Gearless Drivetrain Project explored the application of BWP's innovative, axial-gap, air-core, permanent-magnet direct-drive generator in offshore wind turbines. The objective of this CRADA is to assess the benefits that result from reduced towerhead mass of BWP's technology when used in 6 MW offshore turbines installed on a monopile or a floating spar foundation.

  16. Agreement to market white rot fungi technology

    SciTech Connect

    Not Available

    1988-11-01

    Remediation Technologies, Inc. (ReTeC) has signed a licensing agreement with Utah State University (USU) for the joint commercialization of application of white rot fungi to bioremediate sludges and contaminated soils. The initial effort will focus on the use of composting technology for bioremediation of soils contaminated with coal tar residuals resulting from wood preserving operations and former gas manufacturing sites.

  17. FFTF Authorization Agreement

    SciTech Connect

    DAUTEL, W.A.

    2000-09-25

    The purpose of the Authorization Agreement is to serve as a mechanism whereby the U.S. Department of Energy, Richland Operations Office (RL) and Fluor Hanford (FH) jointly clarify and agree to key conditions for conducting work safely and efficiently in the Fast Flux Test Facility (FFTF). Work must be accomplished in a manner that achieves high levels of quality while protecting the environment and the safety and health of workers and the public, and complying with applicable contractual and regulatory requirements. It is the intent of this Agreement to address those items of significant importance in establishing and supporting the FFTF Authorization Envelope, but this Agreement in no way alters the terms and conditions of the Project Hanford Management Contract (PHMC), Contract Number DE-AC06-96RL13200.

  18. Dubose CRADA

    SciTech Connect

    Schuttler, G.L.

    2000-01-25

    In phase one of this project, Mr. Dubose needed assistance to evaluate his Minimal Crevice Volume (MCV) Piston Ring concept to see if it showed enough technical merit to warrant the expenditure of time and money into patenting the concept and commercializing it. He initially enlisted the help of Texas Tech University, and subsequently Honeywell FM and T, to evaluate the concept for technical feasibility. This evaluation included engineering evaluations of the concept's functionality and manufacturability, along with design analysis and refinement through finite element analysis and other methods. The Principal Investigator at FM and T (Greg Schuttler) and Dr. Maxwell at Texas Tech provided feedback to Mr. Dubose on the functional feasibility of the concept, and the Principal Investigator at FM and T provided manufacturability guidance. Dr. Maxwell had engineering students and a graduate student at Texas Tech conduct static finite element studies to further evaluate the concept; and an extensive dynamic finite element evaluation of the concept, including design refinement, was carried out at FM and T by the Principal Investigator and Jim Mahoney. The results of the FM and T finite element analysis were used as a justification for Mr. Dubose to pursue patent application for this concept. The dynamic finite element study pushed the state-of-the-art for this type of study at FM and T. It also served as a vehicle to facilitate the familiarization of FM and T associates outside the Finite Elements group in Engineering with finite element techniques and capabilities, a plant goal. In phase two of this project, Mr. Dubose was attempting to prove the viability of his already patented ''Variable Orbital Aperture'' concept. All three of the major US automotive corporations had expressed an interest in Mr. Dubose's multiple valve disc concept, if it could be proven that an effective sealing method could be found, since rotary valve engines have historically been nearly impossible to seal. To accomplish this, Mr. Dubose proposed to build a functional single-disc cylinder head to try different seal designs. Texas Tech had a Kawasaki single cylinder engine that was suitable for this use, and it was decided that a rotary valve cylinder head would be fabricated to fit this engine. To this end, Texas Tech provided assistance in creating the cylinder head design, assisted by Honeywell FM and T. Several design iterations were created, and both wax and stereolithography models were created at FM and T to assist the design process. The wax and stereolithography models were used for conceptual visualization of the designs, fit-up checks of the various components with the actual engine, and even flow testing of the intake and exhaust ports. When the design was finalized, two prototype cylinder head assemblies were machined, from aluminum and steel supplied by Texas Tech and Mr. Dubose, in the FM and T Model Shop. The engine was then to be assembled and tested at Texas Tech. At the time that this project was closed, the engine had not yet been completely assembled and tested.

  19. Climbing The Knowledge Mountain - The New Solids Processing Design And Management Manual (Presentation)

    EPA Science Inventory

    The USEPA, Water Environment Federation (WEF) and Water Environment Research Foundation (WERF), under a Cooperative Research and Development Agreement (CRADA), are undertaking a massive effort to produce a Solids Processing Design and Management Manual (Manual). The Manual, repr...

  20. Climbing The Knowledge Mountain - The New Solids Processing Design And Management Manual

    EPA Science Inventory

    The USEPA, Water Environment Federation (WEF) and Water Environment Research Foundation (WERF), under a Cooperative Research and Development Agreement (CRADA), are undertaking a massive effort to produce a Solids Processing Design and Management Manual (Manual). The Manual, repr...

  1. Wind Turbine Blade Test Definition of the DeWind DW90 Rotor Blade: Cooperative Research and Development Final Report, CRADA Number CRD-09-326

    SciTech Connect

    Hughes, S.

    2012-05-01

    This CRADA was developed as a funds-in CRADA with DeWind to assess the suitability of facilities and equipment at the NWTC for performing certification blade testing on wind turbine blades made from advanced materials. DeWind produces a wind turbine blade which includes the use of high-strength and stiffness materials. NREL and DeWind had a mutual interest in defining the necessary facilities, equipment, and test methods for testing large wind turbine blades which incorporate advanced materials and adaptive structures, as the demands on test equipment and infrastructure are greater than current capabilities. Work under this CRADA would enable DeWind to verify domestic capability for certification-class static and fatigue testing, while NREL would be able to identify and develop specialized test capabilities based on the test requirements.

  2. NREL Wind Turbine Blade Structural Testing of the Modular Wind Energy MW45 Blade: Cooperative Research and Development Final Report, CRADA Number CRD-09-354

    SciTech Connect

    Hughes, S.

    2012-05-01

    This CRADA was a purely funds-in CRADA with Modular Wind Energy (MWE). MWE had a need to perform full-scale testing of a 45-m wind turbine blade. NREL/NWTC provided the capabilities, facilities, and equipment to test this large-scale MWE wind turbine blade. Full-scale testing is required to demonstrate the ability of the wind turbine blade to withstand static design load cases and demonstrate the fatigue durability. Structural testing is also necessary to meet international blade testing certification requirements. Through this CRADA, MWE would obtain test results necessary for product development and certification, and NREL would benefit by working with an industrial partner to better understand the unique test requirements for wind turbine blades with advanced structural designs.

  3. Stochastic evolutionary dynamics in minimum-effort coordination games

    NASA Astrophysics Data System (ADS)

    Li, Kun; Cong, Rui; Wang, Long

    2016-08-01

    The minimum-effort coordination game draws recently more attention for the fact that human behavior in this social dilemma is often inconsistent with the predictions of classical game theory. Here, we combine evolutionary game theory and coalescence theory to investigate this game in finite populations. Both analytic results and individual-based simulations show that effort costs play a key role in the evolution of contribution levels, which is in good agreement with those observed experimentally. Besides well-mixed populations, set structured populations have also been taken into consideration. Therein we find that large number of sets and moderate migration rate greatly promote effort levels, especially for high effort costs.

  4. Cognitive effort: A neuroeconomic approach.

    PubMed

    Westbrook, Andrew; Braver, Todd S

    2015-06-01

    Cognitive effort has been implicated in numerous theories regarding normal and aberrant behavior and the physiological response to engagement with demanding tasks. Yet, despite broad interest, no unifying, operational definition of cognitive effort itself has been proposed. Here, we argue that the most intuitive and epistemologically valuable treatment is in terms of effort-based decision-making, and advocate a neuroeconomics-focused research strategy. We first outline psychological and neuroscientific theories of cognitive effort. Then we describe the benefits of a neuroeconomic research strategy, highlighting how it affords greater inferential traction than do traditional markers of cognitive effort, including self-reports and physiologic markers of autonomic arousal. Finally, we sketch a future series of studies that can leverage the full potential of the neuroeconomic approach toward understanding the cognitive and neural mechanisms that give rise to phenomenal, subjective cognitive effort. PMID:25673005

  5. Cognitive effort: A neuroeconomic approach

    PubMed Central

    Braver, Todd S.

    2015-01-01

    Cognitive effort has been implicated in numerous theories regarding normal and aberrant behavior and the physiological response to engagement with demanding tasks. Yet, despite broad interest, no unifying, operational definition of cognitive effort itself has been proposed. Here, we argue that the most intuitive and epistemologically valuable treatment is in terms of effort-based decision-making, and advocate a neuroeconomics-focused research strategy. We first outline psychological and neuroscientific theories of cognitive effort. Then we describe the benefits of a neuroeconomic research strategy, highlighting how it affords greater inferential traction than do traditional markers of cognitive effort, including self-reports and physiologic markers of autonomic arousal. Finally, we sketch a future series of studies that can leverage the full potential of the neuroeconomic approach toward understanding the cognitive and neural mechanisms that give rise to phenomenal, subjective cognitive effort. PMID:25673005

  6. Development of Advanced CdTe Solar Cells Based on High Temperature Corning Glass Substrates: Cooperative Research and Development Final Report, CRADA Number CRD-10-373

    SciTech Connect

    Barnes, T.

    2013-08-01

    NREL has developed advanced processes for CdTe solar cells, but because of the temperature limitations of conventional soda lime glass, many of these processes have not been transferred to manufacturing. Corning is developing high temperature substrate glasses that are believed to be manufacturable and will lead to lower $/watt modules costs. The purpose of this CRADA is to evaluate these glasses in the advanced NREL processes. In addition, the CRADA seeks to develop manufacturable processes for transparent conductive oxide layers based on cadmium stannate.

  7. Agreements in Virtual Organizations

    NASA Astrophysics Data System (ADS)

    Pankowska, Malgorzata

    This chapter is an attempt to explain the important impact that contract theory delivers with respect to the concept of virtual organization. The author believes that not enough research has been conducted in order to transfer theoretical foundations for networking to the phenomena of virtual organizations and open autonomic computing environment to ensure the controllability and management of them. The main research problem of this chapter is to explain the significance of agreements for virtual organizations governance. The first part of this chapter comprises explanations of differences among virtual machines and virtual organizations for further descriptions of the significance of the first ones to the development of the second. Next, the virtual organization development tendencies are presented and problems of IT governance in highly distributed organizational environment are discussed. The last part of this chapter covers analysis of contracts and agreements management for governance in open computing environments.

  8. Countries renew rescue agreement

    NASA Astrophysics Data System (ADS)

    Bush, Susan M.

    To insure long-term continuity for the international satellite search and rescue system, COSPAS/SARSAT, an intergovernmental agreement binding the four sponsoring nations to cooperate was signed July 1 in Paris. According to Russell Vollmers of the National Oceanic and Atmospheric Administration, the agreement is binding for 15 years, with an automatic extension.The system marked the fifth anniversary of its first rescue last year, when on September 10, 1982, three persons were rescued. Begun in the 1970s by NASA as an experiment, COSPAS/SARSAT (a Russian-English acronym) is now a cooperative project among the United States, Canada, France, and the Soviet Union. Its goal is to reduce the time required to rescue air and maritime distress victims and also to locate victims who otherwise may not be found, thus using the satellite system as a life-saving device.

  9. USDOE/EPRI BIOMASS COFIRING COOPERATIVE AGREEMENT

    SciTech Connect

    E. Hughes; D. Tillman

    2000-10-01

    During the period of July 1, 2000 through September 30, 2000, alternatives for relocating the Seward Generating Station cofiring project were investigated. Allegheny Energy Supply Company LLC will accept the separate injection demonstration at its Albright Generating Station. During this period, also, efforts were made at program outreach. Papers were given at the Pittsburgh Coal Conference. This report summarizes the activities during the second calendar quarter in 2000 of the USDOE/EPRI Biomass Cofiring Cooperative Agreement. It focuses upon reporting the results of the relocation of Seward, and on the outreach efforts.

  10. Reduced dust emission industrial vacuum system. Final report/project accomplishments summary, CRADA Number KCP941001

    SciTech Connect

    Yerganian, S.; Wilson, S.

    1997-02-01

    The purpose of this project was to modify the design of a Billy Goat Industries VQ series industrial litter vacuum cleaner currently in production to allow it to be effective in a dusty environment. Other desired results were that the new design be easily and economically manufacturable, safe and easy for the operator to use and maintain, and easily adaptable to the rest of the Billy Goat Industries product line. To meet these objectives, the project plan was divided into four main phases. The first phase consisted of design overview and concept development. The second phase consisted of developing a detailed design based on the lessons learned from the prototype built in the first phase. The third phase consisted of refinement of the detailed design based on testing and marketing review. The fourth phase consisted of final reporting on the activities of the CRADA. The project has been terminated due to technical difficulties and a lack of confidence that practical, marketable solutions to these problems could be found.

  11. Advanced compact laser scanning system enhancements for gear and thread measurements. Final CRADA report

    SciTech Connect

    McKeethan, W.M.; Maxey, L.C.; Bernacki, B.E.; Castore, G.

    1997-04-04

    The measurement, or metrology, of physical objects is a fundamental requirement for industrial progress. Dimensional measurement capability lies at the heart of ones ability to produce objects within the required technical specifications. Dimensional metrology systems are presently dominated by touch-probe technologies, which are mature and reliable. Due to the intricate geometries required in certain fields of manufacturing, these contract probes cannot be physically brought in proximity to the measurement surface, or lack sufficient lateral resolution to satisfactorily determine the surface profile, which can occur in the measurement of gears, splines and thread. Optical probes are viable candidates to supplement the contact probes, since light can be focused to less than one micron (40 microinches), no contact occurs that can mar highly finished surfaces, and no probes must be replaced due to wear. However, optical probes typically excel only on one type of surface: mirror-like or diffuse, and the optical stylus itself is oftentimes not as compact as its contact probe counterpart. Apeiron, Inc. has pioneered the use of optical non-contact sensors to measure machined parts, especially threads, gears and splines. The Oak Ridge Metrology Center at Oak Ridge Y-12 Plant are world-class experts in dimensional metrology. The goal of this CRADA is to tap the expertise in Oak Ridge to evaluate Apeiron`s platform, and to suggest new or novel methods of optical surface sensing, if appropriate.

  12. Telemedicine. Final report/project accomplishments summary CRADA number 95-KCP-1014

    SciTech Connect

    VanDeusen, A.L.

    1997-04-01

    This project was initiated to fill existing voids in the telemedicine equipment market. Currently, when a medical facility adds telemedicine capability to their video conference system, they must purchase expensive and bulky encoders and decoders in order to send information over the available data channel. Even with this expensive equipment, only one data type (stethoscope or ECG) can be sent at a time. In addition, since existing encoders and decoders are not designed specifically for telemedicine, special cables must be built to connect with this equipment. This project resulted in the design and construction of an encoder/decoder system that resolved these issues. The unit (referred to as the Telecoder) is designed specifically for the telemedicine market. The Telecoder is compact, handles two types of data (stethoscope and ECG) simultaneously, integrates with existing medical equipment, and is less expensive. In addition to the Telecoder module, a prototype was built that adds all the necessary logic and interfaces necessary to integrate the basic encoder design into additional Cardionics products. Although a complete integration into other Cardionics products was not in the scope of this CRADA, all the basic design work has been done to allow Cardionics to complete the work.

  13. Learning Environment and Student Effort

    ERIC Educational Resources Information Center

    Hopland, Arnt O.; Nyhus, Ole Henning

    2016-01-01

    Purpose: The purpose of this paper is to explore the relationship between satisfaction with learning environment and student effort, both in class and with homework assignments. Design/methodology/approach: The authors use data from a nationwide and compulsory survey to analyze the relationship between learning environment and student effort. The…

  14. UNITED STATES/GERMAN TECHNICAL BILATERAL AGREEMENT: PAST, PRESENT & FUTURE

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) and the German Federal Ministry of Education and Research (BMBF) entered into a Bilateral Agreement in 1990 to study each country's efforts in developing and demonstrating remedial technologies. The bilateral agreement is being impl...

  15. 23 CFR 450.314 - Metropolitan planning agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... conformity rule (40 CFR part 93). The agreement shall address policy mechanisms for resolving conflicts... developed jointly by the MPOs in cooperation with their respective planning partners. Coordination efforts... such multistate transportation planning may: (1) Enter into agreements or compacts, not in...

  16. 77 FR 12567 - Proposed Information Collection; Comment Request; Submission of Conservation Efforts To Make...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-01

    ... efforts by states and other non-Federal entities (68 FR 15100). The Services take these efforts into... approved collection). Affected Public: Business or other for-profit organizations; and State, local or... monitoring for successful agreements; and 80 hours to prepare a report for successful agreements....

  17. International efforts to develop biospecimen best practices.

    PubMed

    Vaught, Jimmie B; Caboux, Elodie; Hainaut, Pierre

    2010-04-01

    Variables introduced during the processes involved in biospecimen collection, processing, storage, and analysis are among the potential sources of bias in biomarker research. International efforts are under way to develop best practices to standardize biospecimen handling protocols. In general, documents on best practices address three major recurring themes: technical best practices on infrastructure and specimen handling, recommendations on informatics and data management, and recommendations on ethical, legal, and social issues. There are many areas of agreement among various international efforts, but no single set of practices has emerged as a unifying document. The ethical, legal, and social issues are particularly difficult to harmonize due to the many country-specific issues that are governed by a variety of local and federal rules and regulations. Given the increasingly international nature of research involving biomarkers and biospecimens, it will be necessary to continue to cooperate in the development of harmonized evidence-based best practices. Several international organizations including the International Cancer Genome Consortium are engaged in such efforts.

  18. Inverter Load Rejection Over-Voltage Testing: SolarCity CRADA Task 1a Final Report

    SciTech Connect

    Nelson, A.; Hoke, A.; Chakraborty, S.; Chebahtah, J.; Wang, T.; Zimmerly, B.

    2015-02-01

    Various interconnection challenges exist when connecting distributed PV into the electrical distribution grid in terms of safety, reliability, and stability of electric power systems. One of the urgent areas for additional research - as identified by inverter manufacturers, installers, and utilities - is the potential for transient over-voltage from PV inverters. In one stage of a cooperative tests were repeated a total of seven times. The maximum over-voltage measured in any test did not exceed 200% of nominal, and typical over-voltage levels were significantly lower. The total voltage duration and the maximum continuous time above each threshold are presented here, as well as the time to disconnect for each test. Finally, we present a brief investigation into the effect of DC input voltage as well as a series of no-load tests. This report describes testing conducted at NREL to determine the duration and magnitude of transient over-voltages created by several commercial PV inverters during load-rejection conditions. For this work, a test plan that is currently under development by the Forum on Inverter Grid Integration Issues (FIGII) has been implemented in a custom test setup at NREL. Through a cooperative research and development agreement, NREL is working with SolarCity to address two specific types of transient overvoltage: load rejection overvoltage (LRO) and ground fault overvoltage (GFO). Additional partners in this effort include the Hawaiian Electric Companies, Northern Plains Power Technologies, and the Electric Power Research Institute.

  19. EA Shuttle Document Retention Effort

    NASA Technical Reports Server (NTRS)

    Wagner, Howard A.

    2010-01-01

    This slide presentation reviews the effort of code EA at Johnson Space Center (JSC) to identify and acquire databases and documents from the space shuttle program that are adjudged important for retention after the retirement of the space shuttle.

  20. Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density: Cooperative Research and Development Final Report, CRADA Number CRD-12-499

    SciTech Connect

    Smith, K.

    2013-10-01

    Under this CRADA NREL will support Creare's project for the Department of Energy entitled 'Improved Battery Pack Thermal Management to Reduce Cost and Increase Energy Density' which involves the development of an air-flow based cooling product that increases energy density, safety, and reliability of hybrid electric vehicle battery packs.

  1. Commercialization Plan Support for Development of Low Cost Vacuum Insulating Glazing: Cooperative Research and Development Final Report, CRADA Number CRD-11-449

    SciTech Connect

    Dameron, Arrelaine

    2015-07-09

    During the duration of this CRADA, V-Glass and NREL will partner in testing, analysis, performance forecasting, costing, and evaluation of V-Glass’s GRIPWELD™ process technology for creating a low cost hermetic seal for conventional and vacuum glazing. Upon successful evaluation of hermeticity, V-Glass’s GRIPWELD™ will be evaluated for its potential use in highly insulating window glazing.

  2. Development and Demonstration of Energy Savings Perform Contracting Methodologies for Hydroelectric Facilities: Cooperative Research and Development Final Report, CRADA Number CRD-08-309

    SciTech Connect

    Anderson, K.

    2012-04-01

    This CRADA explores the opportunities and challenges of funding federal hydro dam refurbishment projects through ESPCs. It assesses legal authorities for rehabilitating dams through ESPCs; roles and responsibilities of each party including the dam owner, Power Marketing Administration (PMA), ESCO, and preference customers; potential contract structure and flow of money; measurement and verification processes; risk and responsibility allocation; and financial viability of projects.

  3. Development of Abrasion-Resistant Coating for Solar Reflective Films. Cooperative Research and Development Final Report, CRADA Number CRD-07-247

    SciTech Connect

    Gray, Matthew

    2015-10-01

    The purpose of this CRADA is to develop an abrasion-resistant coating, suitable for use on polymeric-based reflective films (e.g., the ReflecTech reflective film), that allows for improved scratch resistance and enables the use of aggressive cleaning techniques (e.g., direct contact methods like brushing) without damaging the specular reflectance properties of the reflective film.

  4. Relationship characteristics and motivations behind agreements among gay male couples: differences by agreement type and couple serostatus.

    PubMed

    Hoff, Colleen C; Beougher, Sean C; Chakravarty, Deepalika; Darbes, Lynae A; Neilands, Torsten B

    2010-07-01

    Gay men in relationships are often overlooked in HIV prevention efforts, yet many engage in sexual behaviors that increase their HIV risk and some seroconvert as a result. While different aspects of gay male relationships have been studied, such as sexual agreements, relationship characteristics, and couple serostatus, little research combines these elements to examine HIV risk for this population. The present study recruited 566 gay male couples from the San Francisco Bay Area to study their sexual agreements, motivations behind making agreements, and other relationship characteristics, such as agreement investment, relationship satisfaction, intimacy, and communication. Participants rated their level of concurrence with a set of reasons for making their agreements. They were also measured on relationship characteristics using standard instruments. Analyses were conducted by agreement type (monogamous, open, and discrepant) and couple serostatus (concordant negative, concordant positive, and discordant). A majority reported explicitly discussing their agreements and nearly equal numbers reported being in monogamous and open relationships. A small number (8%) reported discrepant agreements. Across all agreement type and serostatus groups, HIV prevention as a motivator for agreements fell behind every motivator oriented toward relationship-based factors. Only concordant negative couples endorsed HIV and STD prevention among their top motivators for making an agreement. Mean scores on several relationship characteristics varied significantly. Couples with monogamous agreements had higher scores on most relationship characteristics, although there was no difference in relationship satisfaction between couples with monogamous and open agreements. Scores for concordant positive couples were distinctly lower compared to concordant negative and discordant couples. Agreements, the motivations behind them, and the relationship characteristics associated with them are an

  5. Performance improvement of silicon nitride ball bearings by ion implantation. CRADA final report

    SciTech Connect

    Williams, J.M.; Miner, J.

    1998-03-01

    The present report summarizes technical results of CRADA No. ORNL 92-128 with the Pratt and Whitney Division of United Technologies Corporation. The stated purpose of the program was to assess the 3effect of ion implantation on the rolling contact performance of engineering silicon nitride bearings, to determine by post-test analyses of the bearings the reasons for improved or reduced performance and the mechanisms of failure, if applicable, and to relate the overall results to basic property changes including but not limited to swelling, hardness, modulus, micromechanical properties, and surface morphology. Forty-two control samples were tested to an intended runout period of 60 h. It was possible to supply only six balls for ion implantation, but an extended test period goal of 150 h was used. The balls were implanted with C-ions at 150 keV to a fluence of 1.1 {times} 10{sup 17}/cm{sup 2}. The collection of samples had pre-existing defects called C-cracks in the surfaces. As a result, seven of the control samples had severe spalls before reaching the goal of 60 h for an unacceptable failure rate of 0.003/sample-h. None of the ion-implanted samples experienced engineering failure in 150 h of testing. Analytical techniques have been used to characterize ion implantation results, to characterize wear tracks, and to characterize microstructure and impurity content. In possible relation to C-cracks. It is encouraging that ion implantation can mitigate the C-crack failure mode. However, the practical implications are compromised by the fact that bearings with C-cracks would, in no case, be acceptable in engineering practice, as this type of defect was not anticipated when the program was designed. The most important reason for the use of ceramic bearings is energy efficiency.

  6. Corporate integrity agreements: making the best of a tough situation.

    PubMed

    Ramsey, Robert B

    2002-03-01

    Healthcare providers increasingly are entering into corporate integrity agreements as part of settlements with the Federal government in fraud-and-abuse cases. Providers pursue these settlements to avoid the costs of defending themselves against fraud charges. However, the costs relating to the long-term compliance activity mandated in the settlement's corporate integrity agreement also can be substantial. These costs include significant staff resources that must be devoted to compliance efforts demanded by the agreement and the required engagement of consultants to monitor the organization's compliance. Healthcare financial managers should be familiar with the elements of a typical corporate integrity agreement and understand strategies for negotiating such an agreement. Effective negotiations can help minimize the organization's costs of compliance with the agreement and facilitate its ongoing implementation of the agreement. PMID:11899725

  7. Corporate integrity agreements: making the best of a tough situation.

    PubMed

    Ramsey, Robert B

    2002-03-01

    Healthcare providers increasingly are entering into corporate integrity agreements as part of settlements with the Federal government in fraud-and-abuse cases. Providers pursue these settlements to avoid the costs of defending themselves against fraud charges. However, the costs relating to the long-term compliance activity mandated in the settlement's corporate integrity agreement also can be substantial. These costs include significant staff resources that must be devoted to compliance efforts demanded by the agreement and the required engagement of consultants to monitor the organization's compliance. Healthcare financial managers should be familiar with the elements of a typical corporate integrity agreement and understand strategies for negotiating such an agreement. Effective negotiations can help minimize the organization's costs of compliance with the agreement and facilitate its ongoing implementation of the agreement.

  8. The use of predictive lithostratigraphy to significantly improve the ability to forecast reservoir and source rocks? Final CRADA report.

    SciTech Connect

    Doctor, R. D.; Moore, T. L.; Energy Systems

    2010-06-29

    The purpose of this CRADA, which ended in 2003, was to make reservoir and source rock distribution significantly more predictable by quantifying the fundamental controls on stratigraphic heterogeneity. To do this, the relationships among insolation, climate, sediment supply, glacioeustasy, and reservoir and source rock occurrence were investigated in detail. Work current at the inception of the CRADA had uncovered previously unrecognized associations among these processes and properties that produce a phenomenon that, when properly analyzed, will make lithostratigraphic variability (including texture, porosity, and permeability) substantially more understandable. Computer climate simulations of selected time periods, compared with the global distribution of paleoclimatic indicators, documented spatial and temporal climate changes as a function of insolation and provided quantitative changes in runoff, lake level, and glacioeustasy. The effect of elevation and climate on sediment yield was assessed numerically by analyzing digital terrain and climate data. The phase relationships of climate, yield, and glacioeustatic cycles from the Gulf of Mexico and/or other sedimentary basins were assessed by using lacunarity, a statistical technique.

  9. Dopamine, Behavioral Economics, and Effort

    PubMed Central

    Salamone, John D.; Correa, Merce; Farrar, Andrew M.; Nunes, Eric J.; Pardo, Marta

    2009-01-01

    There are numerous problems with the hypothesis that brain dopamine (DA) systems, particularly in the nucleus accumbens, directly mediate the rewarding or primary motivational characteristics of natural stimuli such as food. Research and theory related to the functions of mesolimbic DA are undergoing a substantial conceptual restructuring, with the traditional emphasis on hedonia and primary reward yielding to other concepts and lines of inquiry. The present review is focused upon the involvement of nucleus accumbens DA in behavioral activation and effort-related processes. Viewed from the framework of behavioral economics, the effects of accumbens DA depletions and antagonism on food-reinforced behavior are highly dependent upon the work requirements of the instrumental task, and DA depleted rats are more sensitive to increases in response costs (i.e., ratio requirements). Moreover, interference with accumbens DA transmission exerts a powerful influence over effort-related choice behavior. Rats with accumbens DA depletions or antagonism reallocate their instrumental behavior away from food-reinforced tasks that have high response requirements, and instead these rats select a less-effortful type of food-seeking behavior. Nucleus accumbens DA and adenosine interact in the regulation of effort-related functions, and other brain structures (anterior cingulate cortex, amygdala, ventral pallidum) also are involved. Studies of the brain systems regulating effort-based processes may have implications for understanding drug abuse, as well as energy-related disorders such as psychomotor slowing, fatigue or anergia in depression and other neurological disorders. PMID:19826615

  10. Dopamine, behavioral economics, and effort.

    PubMed

    Salamone, John D; Correa, Merce; Farrar, Andrew M; Nunes, Eric J; Pardo, Marta

    2009-01-01

    There are numerous problems with the hypothesis that brain dopamine (DA) systems, particularly in the nucleus accumbens, directly mediate the rewarding or primary motivational characteristics of natural stimuli such as food. Research and theory related to the functions of mesolimbic DA are undergoing a substantial conceptual restructuring, with the traditional emphasis on hedonia and primary reward yielding to other concepts and lines of inquiry. The present review is focused upon the involvement of nucleus accumbens DA in behavioral activation and effort-related processes. Viewed from the framework of behavioral economics, the effects of accumbens DA depletions and antagonism on food-reinforced behavior are highly dependent upon the work requirements of the instrumental task, and DA depleted rats are more sensitive to increases in response costs (i.e., ratio requirements). Moreover, interference with accumbens DA transmission exerts a powerful influence over effort-related choice behavior. Rats with accumbens DA depletions or antagonism reallocate their instrumental behavior away from food-reinforced tasks that have high response requirements, and instead these rats select a less-effortful type of food-seeking behavior. Nucleus accumbens DA and adenosine interact in the regulation of effort-related functions, and other brain structures (anterior cingulate cortex, amygdala, ventral pallidum) also are involved. Studies of the brain systems regulating effort-based processes may have implications for understanding drug abuse, as well as energy-related disorders such as psychomotor slowing, fatigue or anergia in depression and other neurological disorders. PMID:19826615

  11. Dopamine, behavioral economics, and effort.

    PubMed

    Salamone, John D; Correa, Merce; Farrar, Andrew M; Nunes, Eric J; Pardo, Marta

    2009-01-01

    There are numerous problems with the hypothesis that brain dopamine (DA) systems, particularly in the nucleus accumbens, directly mediate the rewarding or primary motivational characteristics of natural stimuli such as food. Research and theory related to the functions of mesolimbic DA are undergoing a substantial conceptual restructuring, with the traditional emphasis on hedonia and primary reward yielding to other concepts and lines of inquiry. The present review is focused upon the involvement of nucleus accumbens DA in behavioral activation and effort-related processes. Viewed from the framework of behavioral economics, the effects of accumbens DA depletions and antagonism on food-reinforced behavior are highly dependent upon the work requirements of the instrumental task, and DA depleted rats are more sensitive to increases in response costs (i.e., ratio requirements). Moreover, interference with accumbens DA transmission exerts a powerful influence over effort-related choice behavior. Rats with accumbens DA depletions or antagonism reallocate their instrumental behavior away from food-reinforced tasks that have high response requirements, and instead these rats select a less-effortful type of food-seeking behavior. Nucleus accumbens DA and adenosine interact in the regulation of effort-related functions, and other brain structures (anterior cingulate cortex, amygdala, ventral pallidum) also are involved. Studies of the brain systems regulating effort-based processes may have implications for understanding drug abuse, as well as energy-related disorders such as psychomotor slowing, fatigue or anergia in depression and other neurological disorders.

  12. Development of New Absorber Materials to Achieve Organic Photovoltaic Commercial Modules with 15% Efficiency and 20 Years Lifetime: Cooperative Research and Development Final Report, CRADA Number CRD-12-498

    SciTech Connect

    Olson, D.

    2014-08-01

    Under this CRADA the parties will develop intermediates or materials that can be employed as the active layer in dye sensitized solar cells printed polymer systems, or small molecule organic photovoltaics.

  13. German COIL efforts: status and perspectives

    NASA Astrophysics Data System (ADS)

    Bohn, Willy L.

    2002-05-01

    Historically, COIL research in Germany has started with microwave excitation of an oxygen flow. But soon all efforts have been devoted to the chemical generation of excited singlet oxygen and have eventually given rise to a supersonic 10 kW class rotating disk driven device. A diode based diagnostic provides data of small signal gain and cavity temperature which emphasize the role of iodine injection for different penetration conditions. Heat release can lead to substantially higher temperatures as expected from adiabatic expansion. Power extraction is found to be in good agreement with theoretical predictions. Alternatively, small scale liquid jet generator experiments show encouraging 60 percent efficiency. Besides air defense related applications and a study on space debris removal, results are given which are pertinent to the decommissioning of nuclear installations. In particular, laser cutting of concrete at 1.3 micrometers is demonstrated and theoretically scaled up to relevant power levels.

  14. Peer Victimization and Effortful Control

    PubMed Central

    Iyer, Roopa V.; Kochenderfer-Ladd, Becky; Eisenberg, Nancy; Thompson, Marilyn

    2012-01-01

    The relations among peer victimization, effortful control, school engagement, and academic achievement were examined in a group of 390 (212 boys and 178 girls) racially diverse (38.20% Latino and 46.70% White) 6- to 10-year-old children. Specifically, a multimethod, multi-informant approach was used in which data were gathered using self-report, peer-report, and teacher-report questionnaires at three points in time: twice during the initial year of the study when children were in first and third grades and once in the fall of their second-grade and fourth-grade years, respectively. Findings showed that peer victimization was negatively correlated with effortful control; however, longitudinal analyses conducted to examine causal priority were inconclusive. Results from structural equation modeling were consistent with the hypotheses that school engagement mediated the relations between peer victimization and academic achievement, as well as between effortful control and academic achievement. PMID:23105166

  15. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2012-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  16. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2011-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  17. ASME Code Efforts Supporting HTGRs

    SciTech Connect

    D.K. Morton

    2010-09-01

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  18. Final report for CRADA No. Y1293-0163 with the Tennessee Technology Foundation on behalf of the State of Tennessee. April 1993--April 1994

    SciTech Connect

    1994-12-31

    During the time from April 1993 through April 1994, the State of Tennessee and Martin Marietta Energy Systems, Inc., were engaged in a jointly supported economic development effort. This project was accomplished through collaboration with the Tennessee Technology Foundation (TTF) and supported a consultant to the Tennessee Commission of Economic and Community Development. This document will serve as the final report of that effort and will summarize the activities during the effective period of the subject agreement.

  19. Assessment of pharmacogenomic agreement.

    PubMed

    Safikhani, Zhaleh; El-Hachem, Nehme; Quevedo, Rene; Smirnov, Petr; Goldenberg, Anna; Juul Birkbak, Nicolai; Mason, Christopher; Hatzis, Christos; Shi, Leming; Aerts, Hugo Jwl; Quackenbush, John; Haibe-Kains, Benjamin

    2016-01-01

    In 2013 we published an analysis demonstrating that drug response data and gene-drug associations reported in two independent large-scale pharmacogenomic screens, Genomics of Drug Sensitivity in Cancer (GDSC) and Cancer Cell Line Encyclopedia (CCLE), were inconsistent. The GDSC and CCLE investigators recently reported that their respective studies exhibit reasonable agreement and yield similar molecular predictors of drug response, seemingly contradicting our previous findings. Reanalyzing the authors' published methods and results, we found that their analysis failed to account for variability in the genomic data and more importantly compared different drug sensitivity measures from each study, which substantially deviate from our more stringent consistency assessment. Our comparison of the most updated genomic and pharmacological data from the GDSC and CCLE confirms our published findings that the measures of drug response reported by these two groups are not consistent. We believe that a principled approach to assess the reproducibility of drug sensitivity predictors is necessary before envisioning their translation into clinical settings. PMID:27408686

  20. Assessment of pharmacogenomic agreement

    PubMed Central

    Safikhani, Zhaleh; El-Hachem, Nehme; Quevedo, Rene; Smirnov, Petr; Goldenberg, Anna; Juul Birkbak, Nicolai; Mason, Christopher; Hatzis, Christos; Shi, Leming; Aerts, Hugo JWL; Quackenbush, John; Haibe-Kains, Benjamin

    2016-01-01

    In 2013 we published an analysis demonstrating that drug response data and gene-drug associations reported in two independent large-scale pharmacogenomic screens, Genomics of Drug Sensitivity in Cancer (GDSC) and Cancer Cell Line Encyclopedia (CCLE), were inconsistent. The GDSC and CCLE investigators recently reported that their respective studies exhibit reasonable agreement and yield similar molecular predictors of drug response, seemingly contradicting our previous findings. Reanalyzing the authors’ published methods and results, we found that their analysis failed to account for variability in the genomic data and more importantly compared different drug sensitivity measures from each study, which substantially deviate from our more stringent consistency assessment. Our comparison of the most updated genomic and pharmacological data from the GDSC and CCLE confirms our published findings that the measures of drug response reported by these two groups are not consistent. We believe that a principled approach to assess the reproducibility of drug sensitivity predictors is necessary before envisioning their translation into clinical settings. PMID:27408686

  1. Agreement with Subjects in Lubukusu

    ERIC Educational Resources Information Center

    Diercks, Michael J. K.

    2010-01-01

    This dissertation examines three topics in the morphosyntax of Lubukusu (Bantu, Kenya), all of which are concerned with agreement with subjects: locative inversion, complementizer agreement, and alternative agreement effects in subject extraction. Each topic reports novel Lubukusu data which are both typologically interesting and theoretically…

  2. Mining Agreements with Indian Tribes

    ERIC Educational Resources Information Center

    Luebben, Tom

    1976-01-01

    The article discusses aspects of negotiating agreements for exploration, development, and mining of hard minerals on Indian Reservations. The agreements discussed are typical of copper agreements, but the general points under discussion are applicable to most hard minerals except for uranium, coal, and oil which are substantially different.…

  3. The Telemetry Agile Manufacturing Effort

    SciTech Connect

    Brown, K.D.

    1995-01-01

    The Telemetry Agile Manufacturing Effort (TAME) is an agile enterprising demonstration sponsored by the US Department of Energy (DOE). The project experimented with new approaches to product realization and assessed their impacts on performance, cost, flow time, and agility. The purpose of the project was to design the electrical and mechanical features of an integrated telemetry processor, establish the manufacturing processes, and produce an initial production lot of two to six units. This paper outlines the major methodologies utilized by the TAME, describes the accomplishments that can be attributed to each methodology, and finally, examines the lessons learned and explores the opportunities for improvement associated with the overall effort. The areas for improvement are discussed relative to an ideal vision of the future for agile enterprises. By the end of the experiment, the TAME reduced production flow time by approximately 50% and life cycle cost by more than 30%. Product performance was improved compared with conventional DOE production approaches.

  4. Britz-Heidbrink Inc. Mini-CRADA, Powder Coating of Animal Enclosures

    SciTech Connect

    Smith, M.D.

    2000-01-04

    The goal of this CRADA was to combine the powder coating material and application techniques and laboratory testing capabilities of FM and T with the manufacturing, real-world testing, and practical knowledge available to BHI in a limited study to determine if coated stainless steel would provide the durability needed to justify additional work in this area. The coating materials chosen had to have low reflectivity and be easily sanitized, non-toxic, pleasant in appearance, and durable for the lifetime of the stainless steel product. The materials also had to be capable of withstanding the daily abuse of animal contact, impact with walls or other hard surfaces, and exposure to a variety of lighting and climatic conditions. FM and T and BHI worked together to investigate coating materials that under normal conditions would be exposed, at least weekly, to 180 F to 260 F washing and sanitization procedures that include strong detergents and phosphoric acid. After a proper cleaning method for the bare panels was established, six different powder coatings were selected and tested. The coatings were selected for their known resistance to harsh chemicals. Sample panels of each coating passed 1000 hours of continuous salt fog exposure and 24-hour constant submersion in heated disinfectant solutions. Actual cage panels were then coated and installed in a high-pressure spray washer at a medical research facility for accelerated real-world testing. In the high-pressure spray washer, the panels received the equivalent of one year's exposure to harsh chemicals in one week. In addition to the exposure to the harsh sanitizing chemicals, the test panels never had a chance to get completely dry. In actual use, the panels would have been cleaned once a week and would have been essentially dry the rest of the time. Constant soak in wet conditions is one of the most difficult tests of paint durability. The accelerated aging indicated that five of the six coatings tested are able to

  5. New Horizons Launch Contingency Effort

    NASA Astrophysics Data System (ADS)

    Chang, Yale; Lear, Matthew H.; McGrath, Brian E.; Heyler, Gene A.; Takashima, Naruhisa; Owings, W. Donald

    2007-01-01

    On 19 January 2006 at 2:00 PM EST, the NASA New Horizons spacecraft (SC) was launched from the Cape Canaveral Air Force Station (CCAFS), FL, onboard an Atlas V 551/Centaur/STAR™ 48B launch vehicle (LV) on a mission to explore the Pluto Charon planetary system and possibly other Kuiper Belt Objects. It carried a single Radioisotope Thermoelectric Generator (RTG). As part of the joint NASA/US Department of Energy (DOE) safety effort, contingency plans were prepared to address the unlikely events of launch accidents leading to a near-pad impact, a suborbital reentry, an orbital reentry, or a heliocentric orbit. As the implementing organization. The Johns Hopkins University Applied Physics Laboratory (JHU/APL) had expanded roles in the New Horizons launch contingency effort over those for the Cassini mission and Mars Exploration Rovers missions. The expanded tasks included participation in the Radiological Control Center (RADCC) at the Kennedy Space Center (KSC), preparation of contingency plans, coordination of space tracking assets, improved aerodynamics characterization of the RTG's 18 General Purpose Heat Source (GPHS) modules, and development of spacecraft and RTG reentry breakup analysis tools. Other JHU/APL tasks were prediction of the Earth impact footprints (ElFs) for the GPHS modules released during the atmospheric reentry (for purposes of notification and recovery), prediction of the time of SC reentry from a potential orbital decay, pre-launch dissemination of ballistic coefficients of various possible reentry configurations, and launch support of an Emergency Operations Center (EOC) on the JHU/APL campus. For the New Horizons launch, JHU/APL personnel at the RADCC and at the EOC were ready to implement any real-time launch contingency activities. A successful New Horizons launch and interplanetary injection precluded any further contingency actions. The New Horizons launch contingency was an interagency effort by several organizations. This paper

  6. Authors, Publishers and Politicians: The Quest for an Anglo-American Copyright Agreement 1815-1854.

    ERIC Educational Resources Information Center

    Barnes, James J.

    This book describes the efforts made between 1815 and 1854 to secure an Anglo-American copyright agreement and indicates the factors that caused such efforts to fail. The book reports the effects that the lack of a copyright agreement had on overall Anglo-American relations and on British and American writers and publishers. Chapters provide…

  7. Blade Testing Equipment Development and Commercialization: Cooperative Research and Development Final Report, CRADA Number CRD-09-346

    SciTech Connect

    Snowberg, D.; Hughes, S.

    2013-04-01

    Blade testing is required to meet wind turbine design standards, reduce machine cost, and reduce the technical and financial risk of deploying mass-produced wind turbine models. NREL?s National Wind Technology Center (NWTC) in Colorado is the only blade test facility in the U.S. capable of performing full-scale static and fatigue testing of multi-megawatt-scale wind turbine blades. Rapid growth in wind turbine size over the past two decades has outstripped the size capacity of the NWTC blade test facility leaving the U.S. wind industry without a suitable means of testing blades for large land-based and offshore turbines. This CRADA will develop and commercialize testing technologies and test equipment, including scaling up, value engineering, and testing of equipment to be used at blade testing facilities in the U.S. and around the world.

  8. Organic Based Nanocomposite Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-04-145

    SciTech Connect

    Olson, D.

    2013-01-01

    This CRADA will focus on the development of organic-based solar cells. Key interfacial issues in these cells will be investigated. In this rapidly emerging technology, it is increasingly clear that cell architecture will need to be at the nanoscale and the interfacial issues between organic elements (small molecule and polymer), transparent conducting oxides, and contact metallizations are critical. Thus this work will focus on the development of high surface area and nanostructured nanocarpets of inorganic oxides, the development of appropriate surface binding/acceptor molecules for the inorganic/organic interface, and the development of next-generation organic materials. Work will be performed in all three areas jointly at NREL and Konarka (with their partner in the third area of the University of Delaware). Results should be more rapid progress toward cheap large-area photovoltaic cells.

  9. 75 FR 40837 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-14

    ....gov . Agreement No.: 011279-027. Title: Latin America Agreement. Parties: ABC Discussion Agreement; Caribbean Shipowners Association; Central America Discussion Agreement; Compania Libra de Navegacion Uruguay... America Discussion Agreement; and Zim Integrated Shipping Services, Ltd. Filing Party: Wayne R. Rohde,...

  10. Byzantine agreement method without authentication

    SciTech Connect

    Reischuk, R.K.

    1983-12-01

    This invention relates to a method for achieving Byzantine agreement without authentication among n 100 communicating processors using event counting and thresholding rather than message exchanges and evaluations.

  11. APS Education and Diversity Efforts

    NASA Astrophysics Data System (ADS)

    Prestridge, Katherine; Hodapp, Theodore

    2015-11-01

    American Physical Society (APS) has a wide range of education and diversity programs and activities, including programs that improve physics education, increase diversity, provide outreach to the public, and impact public policy. We present the latest programs spearheaded by the Committee on the Status of Women in Physics (CSWP), with highlights from other diversity and education efforts. The CSWP is working to increase the fraction of women in physics, understand and implement solutions for gender-specific issues, enhance professional development opportunities for women in physics, and remedy issues that impact gender inequality in physics. The Conferences for Undergraduate Women in Physics, Professional Skills Development Workshops, and our new Professional Skills program for students and postdocs are all working towards meeting these goals. The CSWP also has site visit and conversation visit programs, where department chairs request that the APS assess the climate for women in their departments or facilitate climate discussions. APS also has two significant programs to increase participation by underrepresented minorities (URM). The newest program, the APS National Mentoring Community, is working to provide mentoring to URM undergraduates, and the APS Bridge Program is an established effort that is dramatically increasing the number of URM PhDs in physics.

  12. Analysis Efforts Supporting NSTX Upgrades

    SciTech Connect

    H.Zhang, P. Titus, P. Rogoff, A.Zolfaghari, D. Mangra, M. Smith

    2010-11-29

    The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

  13. Experience and grammatical agreement: Statistical learning shapes number agreement production

    PubMed Central

    Haskell, Todd R.; Thornton, Robert; MacDonald, Maryellen C.

    2009-01-01

    A robust result in research on the production of grammatical agreement is that speakers are more likely to produce an erroneous verb with phrases such as the key to the cabinets, with a singular noun followed by a plural one, than with phrases such as the keys to the cabinet, where a plural noun is followed by a singular. These asymmetries are thought to reflect core language production processes. Previous accounts have attributed error patterns to a syntactic number feature present on plurals but not singulars. An alternative approach is presented in which a process similar to structural priming contributes to the error asymmetry via speakers' past experiences with related agreement constructions. A corpus analysis and two agreement production studies test this account. The results suggest that agreement production is shaped by statistical learning from past language experience. Implications for accounts of agreement are discussed. PMID:19942213

  14. Risks worth Taking: Safety Agreements among Discordant Gay Couples

    PubMed Central

    Beougher, Sean C.; Chakravarty, Deepalika; Garcia, Carla C.; Darbes, Lynae A.; Neilands, Torsten B.; Hoff, Colleen C.

    2012-01-01

    As HIV research and prevention efforts increasingly target gay men in relationships, situational factors such as couple serostatus and agreements about sex become central to examinations of risk. Discordant gay couples are of particular interest because the risk of HIV infection is seemingly near-at-hand. Yet little is known about their sexual behaviors, agreements about sex, and safer sex efforts. The present study utilized longitudinal semi-structured, qualitative interviews to explore these issues among 12 discordant couples. Findings show that nearly every couple had agreements about reducing the likelihood of HIV transmission from one partner to the other. Negotiating these agreements involved establishing a level of acceptable risk, determining condom use, and employing other risk-reduction techniques, such as seropositioning and withdrawal. For half of the couples, these agreements did not involve using condoms; only two couples reported consistent condom use. Despite forgoing condoms, however, none reported seroconversion over the course of data collection. Additional issues are raised where long-term HIV prevention is concerned. Future prevention efforts with discordant couples should work with, rather than fight against, the couple’s decision to use condoms and endeavor to complement and accentuate their other safer sex efforts. PMID:22292838

  15. Skills agreement. Recipe for success.

    PubMed

    Nolan, Alexis

    2007-06-21

    The aims of the national health Sector Skills Agreement need regional and local implementation by stakeholders to become reality. Work in the East of England will produce a first regional skills agreement later this year. The Harlow Project is producing award winning process on recuitment and retention. PMID:17847967

  16. Efficiency Improvement of Nitride-Based Solid State Light Emitting Materials -- CRADA Final Report

    SciTech Connect

    Kisielowski, Christian; Weber, Eicke

    2010-05-13

    The development of In{sub x}Ga{sub 1-x} N/GaN thin film growth by Molecular Beam Epitaxy has opened a new route towards energy efficient solid-state lighting. Blue and green LED's became available that can be used to match the whole color spectrum of visible light with the potential to match the eye response curve. Moreover, the efficiency of such devices largely exceeds that of incandescent light sources (tungsten filaments) and even competes favorably with lighting by fluorescent lamps. It is, however, also seen in Figure 1 that it is essential to improve on the luminous performance of green LED's in order to mimic the eye response curve. This lack of sufficiently efficient green LED's relates to particularities of the In{sub x}Ga{sub 1-x}N materials system. This ternary alloy system is polar and large strain is generated during a lattice mismatched thin film growth because of the significantly different lattice parameters between GaN and InN and common substrates such as sapphire. Moreover, it is challenging to incorporate indium into GaN at typical growth temperatures because a miscibility gap exists that can be modified by strain effects. As a result a large parameter space needs exploration to optimize the growth of In{sub x}Ga{sub 1-x}N and to date it is unclear what the detailed physical processes are that affect device efficiencies. In particular, an inhomogeneous distribution indium in GaN modifies the device performance in an unpredictable manner. As a result technology is pushed forward on a trial and error basis in particular in Asian countries such as Japan and Korea, which dominate the market and it is desirable to strengthen the competitiveness of the US industry. This CRADA was initiated to help Lumileds Lighting/USA boosting the performance of their green LED's. The tasks address the distribution of the indium atoms in the active area of their blue and green LED's and its relation to internal and external quantum efficiencies. Procedures to

  17. Federal Facility Agreement progress report

    SciTech Connect

    Not Available

    1993-10-01

    The (SRS) Federal Facility Agreement (FFA) was made effective by the US. Environmental Protection Agency Region IV (EPA) on August 16, 1993. To meet the reporting requirements in Section XXV of the Agreement, the FFA Progress Report was developed. The FFA Progress Report is the first of a series of quarterly progress reports to be prepared by the SRS. As such this report describes the information and action taken to September 30, 1993 on the SRS units identified for investigation and remediation in the Agreement. This includes; rubble pits, runoff basins, retention basin, seepage basin, burning pits, H-Area Tank 16, and spill areas.

  18. Suspension agreements: The status quota

    SciTech Connect

    1996-01-01

    Since the initial filing of anti-dumping actions uranium imports from the former Soviet Union, a maze of filings, agreements, amendments, bills, measures, and deals have emerged on which only the closest observers remain current. Even with all the actions that have taken place, none of the parties appear content with the status quo and changes to the agreements are ongoing. Given this dynamic state of affairs, a recap of events and a summary of the current agreements is helpful for understanding the concerns of the involved parties and digesting future events.

  19. Articulation Agreements between High Schools, Community Colleges, and Universities.

    ERIC Educational Resources Information Center

    Illinois Community Coll. Board, Springfield.

    Designed to assist college officials in developing and revising articulation agreements, this report describes specific program articulation efforts between Illinois high schools, community colleges, and public and private universities. Data presented were drawn from a survey of 102 public and private community colleges, which resulted in 94…

  20. Good Agreements Make Good Friends

    PubMed Central

    Han, The Anh; Pereira, Luís Moniz; Santos, Francisco C.; Lenaerts, Tom

    2013-01-01

    When starting a new collaborative endeavor, it pays to establish upfront how strongly your partner commits to the common goal and what compensation can be expected in case the collaboration is violated. Diverse examples in biological and social contexts have demonstrated the pervasiveness of making prior agreements on posterior compensations, suggesting that this behavior could have been shaped by natural selection. Here, we analyze the evolutionary relevance of such a commitment strategy and relate it to the costly punishment strategy, where no prior agreements are made. We show that when the cost of arranging a commitment deal lies within certain limits, substantial levels of cooperation can be achieved. Moreover, these levels are higher than that achieved by simple costly punishment, especially when one insists on sharing the arrangement cost. Not only do we show that good agreements make good friends, agreements based on shared costs result in even better outcomes. PMID:24045873

  1. Quick Guide: Power Purchase Agreements

    SciTech Connect

    2010-06-25

    Introduction to Federal power purchase agreements (PPAs), including available FEMP services and technical assistance as well as questions to ask when evaluating PPAs for a Federal renewable energy project.

  2. Rain Hampers Tsunami Relief Efforts

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The cleanup and relief efforts from the recent tsunamis continue in coastal communities that were ravaged by the waves all across the Indian Ocean. Heavy rains have further complicated the matter and added to the misery in parts of eastern Sri Lanka. Between December 28, 2004, and January 5, 2005, up to 10 to 15 inches of rain may have fallen along the southeast coast of the island, and as much as 20 inches (red areas) fell just offshore. This rainfall map was created by the TRMM-based, near-real time Multi-satellite Precipitation Analysis (MPA) at the NASA Goddard Space Flight Center, which monitors rainfall over the global tropics. The map shows that many other regions around the Indian Ocean were also affected by the rains, including Malaysia and parts of Sumatra. The heaviest rains fell on December 31 and January 4. The rains were likely the result of a combination of the northeast monsoon interacting with the topography and an active phase of what is known as the Madden-Julian Oscillation (MJO) (or 30-60 day oscillation). The MJO is a large-scale disturbance that propagates eastward from the Indian Ocean into the West Pacific Ocean, bringing extended periods of unsettled weather with it. Individual convective complexes within the MJO can last on the order of a day. TRMM is a joint mission between NASA and the Japanese space agency JAXA. NASA image produced by Hal Pierce (SSAI/NASA GSFC) and caption by Steve Lang (SSAI/NASA GSFC).

  3. Empirical agreement in model validation.

    PubMed

    Jebeile, Julie; Barberousse, Anouk

    2016-04-01

    Empirical agreement is often used as an important criterion when assessing the validity of scientific models. However, it is by no means a sufficient criterion as a model can be so adjusted as to fit available data even though it is based on hypotheses whose plausibility is known to be questionable. Our aim in this paper is to investigate into the uses of empirical agreement within the process of model validation.

  4. CRADA Final Report: Application of Dual-Mode Inverter Control to Commercially Available Radial-Gap Mermanent Magnet Motors - Vol. I

    SciTech Connect

    McKeever, John W; Lawler, Jack; Downing, Mark; Stahlhut, Ronnie D; Bremmer, R.; Shoemaker, J. M.; Seksarian, A. K.; Poore, B.; Lutz, Jon F

    2006-05-01

    John Deere and Company (Deere), their partner, UQM Technologies, Inc. (UQM), and the Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center (PEEMRC) recently completed work on the cooperative research and development agreement (CRADA) Number ORNL 04-0691 outlined in this report. CRADA 04-0691 addresses two topical issues of interest to Deere: (1) Improved characterization of hydrogen storage and heat-transfer management; and (2) Potential benefits from advanced electric motor traction-drive technologies. This report presents the findings of the collaborative examination of potential operational and cost benefits from using ORNL/PEEMRC dual-mode inverter control (DMIC) to drive permanent magnet (PM) motors in applications of interest to Deere. DMIC was initially developed and patented by ORNL to enable PM motors to be driven to speeds far above base speed where the back-electromotive force (emf) equals the source voltage where it is increasingly difficult to inject current into the motor. DMIC is a modification of conventional phase advance (CPA). DMIC's dual-speed modes are below base speed, where traditional pulse-width modulation (PWM) achieves maximum torque per ampere (amp), and above base speed, where six-step operation achieves maximum power per amp. The modification that enables DMIC adds two anti-parallel thyristors in each of the three motor phases, which consequently adds the cost of six thyristors. Two features evaluated in this collaboration with potential to justify the additional thyristor cost were a possible reduction in motor cost and savings during operation because of higher efficiency, both permitted because of lower current. The collaborative analysis showed that the reduction of motor cost and base cost of the inverter was small, while the cost of adding six thyristors was greater than anticipated. Modeling the DMIC control displayed inverter efficiency gains due to reduced current, especially under

  5. Application Agreement and Integration Services

    NASA Technical Reports Server (NTRS)

    Driscoll, Kevin R.; Hall, Brendan; Schweiker, Kevin

    2013-01-01

    Application agreement and integration services are required by distributed, fault-tolerant, safety critical systems to assure required performance. An analysis of distributed and hierarchical agreement strategies are developed against the backdrop of observed agreement failures in fielded systems. The documented work was performed under NASA Task Order NNL10AB32T, Validation And Verification of Safety-Critical Integrated Distributed Systems Area 2. This document is intended to satisfy the requirements for deliverable 5.2.11 under Task 4.2.2.3. This report discusses the challenges of maintaining application agreement and integration services. A literature search is presented that documents previous work in the area of replica determinism. Sources of non-deterministic behavior are identified and examples are presented where system level agreement failed to be achieved. We then explore how TTEthernet services can be extended to supply some interesting application agreement frameworks. This document assumes that the reader is familiar with the TTEthernet protocol. The reader is advised to read the TTEthernet protocol standard [1] before reading this document. This document does not re-iterate the content of the standard.

  6. 7 CFR 247.4 - Agreements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.4 Agreements. (a) What agreements are..., sex, or disability. (d) What is the duration of required agreements? Agreements between FNS and...

  7. 7 CFR 247.4 - Agreements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.4 Agreements. (a) What agreements are..., sex, or disability. (d) What is the duration of required agreements? Agreements between FNS and...

  8. 76 FR 70748 - Proposed Information Collection; Policy for Evaluation of Conservation Efforts When Making...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-15

    ... endangered species under the ESA. The Policy for Evaluation of Conservation Efforts When Making Listing Decisions (PECE) (68 FR 15100) encourages the development of conservation agreements/plans and provides... Efforts When Making Listing Decisions (PECE) AGENCY: Fish and Wildlife Service, Interior. ACTION:...

  9. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Third Quarterly Report

    SciTech Connect

    Nguyen, Ba Nghiep; Simmons, Kevin L.

    2013-08-06

    This quarterly report summarizes the status for the project planning to obtain all the approvals required for a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). The CRADA documents have been processed by PNNL Legal Services that is also coordinating the revision effort with the industrial parties to address DOE’s comments.

  10. Gender agreement and multiple referents.

    PubMed

    Finocchiaro, Chiara; Mahon, Bradford Z; Caramazza, Alfonso

    2008-01-01

    We report a new pattern of usage in current, spoken Italian that has implications for both psycholinguistic models of language production and linguistic theories of language change. In Italian, gender agreement is mandatory for both singular and plural nouns. However, when two or more nouns of different grammatical gender appear in a conjoined noun phrase (NP), masculine plural agreement is required. In this study, we combined on-line and off-line methodologies in order to assess the mechanisms involved in gender marking in the context of multiple referents. The results of two pronoun production tasks showed that plural feminine agreement was significantly more difficult than plural masculine agreement. In a separate study using offline judgements of acceptability, we found that agreement violations in Italian are tolerated more readily in the case of feminine conjoined noun phrases (e.g., la mela e la banana 'the:fem apple:fem and the: fem banana: fem') than masculine conjoined noun phrases (e.g., il fiore e il libro 'the:mas flower: mas and the:mas book:mas'). Implications of these results are discussed both at the level of functional architecture within the language production system and at the level of changes in language use. PMID:21037930

  11. Gender agreement and multiple referents.

    PubMed

    Finocchiaro, Chiara; Mahon, Bradford Z; Caramazza, Alfonso

    2008-01-01

    We report a new pattern of usage in current, spoken Italian that has implications for both psycholinguistic models of language production and linguistic theories of language change. In Italian, gender agreement is mandatory for both singular and plural nouns. However, when two or more nouns of different grammatical gender appear in a conjoined noun phrase (NP), masculine plural agreement is required. In this study, we combined on-line and off-line methodologies in order to assess the mechanisms involved in gender marking in the context of multiple referents. The results of two pronoun production tasks showed that plural feminine agreement was significantly more difficult than plural masculine agreement. In a separate study using offline judgements of acceptability, we found that agreement violations in Italian are tolerated more readily in the case of feminine conjoined noun phrases (e.g., la mela e la banana 'the:fem apple:fem and the: fem banana: fem') than masculine conjoined noun phrases (e.g., il fiore e il libro 'the:mas flower: mas and the:mas book:mas'). Implications of these results are discussed both at the level of functional architecture within the language production system and at the level of changes in language use.

  12. Gender agreement and multiple referents

    PubMed Central

    Finocchiaro, Chiara; Mahon, Bradford Z.; Caramazza, Alfonso

    2010-01-01

    We report a new pattern of usage in current, spoken Italian that has implications for both psycholinguistic models of language production and linguistic theories of language change. In Italian, gender agreement is mandatory for both singular and plural nouns. However, when two or more nouns of different grammatical gender appear in a conjoined noun phrase (NP), masculine plural agreement is required. In this study, we combined on-line and off-line methodologies in order to assess the mechanisms involved in gender marking in the context of multiple referents. The results of two pronoun production tasks showed that plural feminine agreement was significantly more difficult than plural masculine agreement. In a separate study using offline judgements of acceptability, we found that agreement violations in Italian are tolerated more readily in the case of feminine conjoined noun phrases (e.g., la mela e la banana ‘the:fem apple:fem and the: fem banana: fem’) than masculine conjoined noun phrases (e.g., il fiore e il libro ‘the:mas flower: mas and the:mas book:mas’). Implications of these results are discussed both at the level of functional architecture within the language production system and at the level of changes in language use.* PMID:21037930

  13. Experience and Grammatical Agreement: Statistical Learning Shapes Number Agreement Production

    ERIC Educational Resources Information Center

    Haskell, Todd R.; Thornton, Robert; MacDonald, Maryellen C.

    2010-01-01

    A robust result in research on the production of grammatical agreement is that speakers are more likely to produce an erroneous verb with phrases such as "the key to the cabinets", with a singular noun followed by a plural one, than with phrases such as "the keys to the cabinet", where a plural noun is followed by a singular. These asymmetries are…

  14. CRADA Final Report: Characterization of Failure Modes in Lithium Metal Batteries

    SciTech Connect

    Kerr, John B.

    2005-06-27

    A plan was prepared to investigate the factors that controlled the growth of dendrites in lithium metal polymer batteries. Full agreement on the scope of the work could not be reached due to factors outside the control of the parties. The program was terminated as a result.

  15. Authenticated algorithms for Byzantine agreement

    SciTech Connect

    Dolev, D.; Strong, H.R.

    1983-11-01

    Reaching agreement in a distributed system in the presence of fault processors is a central issue for reliable computer systems. Using an authentication protocol, one can limit the undetected behavior of faulty processors to a simple failure to relay messages to all intended targets. In this paper the authors show that, in spite of such an ability to limit faulty behavior, and no matter what message types or protocols are allowed, reaching (Byzantine) agreement requires at least t+1 phases or rounds of information exchange, where t is an upper bound on the number of faulty processors. They present algorithms for reaching agreement based on authentication that require a total number of messages sent by correctly operating processors that is polynomial in both t and the number of processors, n. The best algorithm uses only t+1 phases and o(nt) messages. 9 references.

  16. A Cooperative Effort: That's the Key

    ERIC Educational Resources Information Center

    Greer, Richard M.

    1976-01-01

    Counselors are the mental health specialists in the schools, according to the author. As such, they should call upon the community's mental health services in an effort to provide better school services through a cooperative effort. (Author/HMV)

  17. Advanced hardware and software methods for thread and gear dimensional metrology. CRADA final report

    SciTech Connect

    Miller, A.C. Jr.; Grann, E.B.

    1997-03-05

    The Oak Ridge Centers for Manufacturing Technology (ORCMT) and Apeiron Incorporated have collaborated on an effort to develop a frequency modulated continuous wave (FMCW) fiber lidar system for dimensional metrology of internal threads, gears, and splines. The purpose of this effort was to assist a small company in developing an instrument that would exceed the performance of competing foreign instruments and provide measurement capabilities necessary to assure compliance for NASA facilities and other industrial facilities. The two parties collaborated on design, assembly, and bench testing of the prototype instrument. The prototype system was targeted to have the capability of profiling internally machined gears and threads to an accuracy of less than a micron.

  18. New N-Type Polymers for Organic Photovoltaics: Cooperative Research and Development Final Report, CRADA Number CRD-06-177

    SciTech Connect

    Olson, D.

    2014-08-01

    This CRADA will develop improved thin film organic solar cells using a new n-type semiconducting polymer. High efficiency photovoltaics (PVs) based on inorganic semiconductors have good efficiencies (up to 30%) but are extremely expensive to manufacture. Organic PV technology has the potential to overcome this problem through the use of high-throughput production methods like reel-to-reel printing on flexible substrates. Unfortunately, today's best organic PVs have only a few percent efficiency, a number that is insufficient for virtually all commercial applications. The limited choice of stable n-type (acceptor) organic semiconductor materials is one of the key factors that prevent the further improvement of organic PVs. TDA Research, Inc. (TDA) previously developed a new class of electron-deficient (n-type) conjugated polymers for use in organic light emitting diodes (OLEDs). During this project TDA in collaboration with the National Renewable Energy Laboratory (NREL) will incorporate these electron-deficient polymers into organic photovoltaics and investigate their performance. TDA Research, Inc. (TDA) is developing new materials and polymers to improve the performance of organic solar cells. Materials being developed at TDA include spin coated transparent conductors, charge injection layers, fullerene derivatives, electron-deficient polymers, and three-phase (fullerene/polythiophene/dye) active layer inks.

  19. Mass support for global climate agreements depends on institutional design

    PubMed Central

    Bechtel, Michael M.; Scheve, Kenneth F.

    2013-01-01

    Effective climate mitigation requires international cooperation, and these global efforts need broad public support to be sustainable over the long run. We provide estimates of public support for different types of climate agreements in France, Germany, the United Kingdom, and the United States. Using data from a large-scale experimental survey, we explore how three key dimensions of global climate cooperation—costs and distribution, participation, and enforcement—affect individuals’ willingness to support these international efforts. We find that design features have significant effects on public support. Specifically, our results indicate that support is higher for global climate agreements that involve lower costs, distribute costs according to prominent fairness principles, encompass more countries, and include a small sanction if a country fails to meet its emissions reduction targets. In contrast to well-documented baseline differences in public support for climate mitigation efforts, opinion responds similarly to changes in climate policy design in all four countries. We also find that the effects of institutional design features can bring about decisive changes in the level of public support for a global climate agreement. Moreover, the results appear consistent with the view that the sensitivity of public support to design features reflects underlying norms of reciprocity and individuals’ beliefs about the potential effectiveness of specific agreements. PMID:23886666

  20. Articulation Agreements Ease the Way.

    ERIC Educational Resources Information Center

    Reese, Susan

    2002-01-01

    Articulation agreements between secondary and postsecondary institutions often provide for granting college credit for course work completed at another institution. They have been described as programs designed to create pathways of learning that ease the transition of students from secondary to postsecondary levels. (JOW)

  1. Block Transfer Agreement Evaluation Project

    ERIC Educational Resources Information Center

    Bastedo, Helena

    2010-01-01

    The objective of this project is to evaluate for the British Columbia Council on Admissions and Transfer (BCCAT) the effectiveness of block transfer agreements (BTAs) in the BC Transfer System and recommend steps to be taken to improve their effectiveness. Findings of this study revealed that institutions want to expand block credit transfer;…

  2. 48 CFR 16.702 - Basic agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Basic agreements. 16.702... AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 16.702 Basic agreements. (a) Description. A basic... attachment the required and applicable clauses agreed upon in the basic agreement. A basic agreement is not...

  3. 48 CFR 16.702 - Basic agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Basic agreements. 16.702... AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 16.702 Basic agreements. (a) Description. A basic... attachment the required and applicable clauses agreed upon in the basic agreement. A basic agreement is not...

  4. 48 CFR 16.702 - Basic agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Basic agreements. 16.702... AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 16.702 Basic agreements. (a) Description. A basic... attachment the required and applicable clauses agreed upon in the basic agreement. A basic agreement is not...

  5. 48 CFR 16.702 - Basic agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Basic agreements. 16.702... AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 16.702 Basic agreements. (a) Description. A basic... attachment the required and applicable clauses agreed upon in the basic agreement. A basic agreement is not...

  6. 48 CFR 16.702 - Basic agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Basic agreements. 16.702... AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 16.702 Basic agreements. (a) Description. A basic... attachment the required and applicable clauses agreed upon in the basic agreement. A basic agreement is not...

  7. NREL/University of Delaware Offshore Wind R&D Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-10-393

    SciTech Connect

    Musial, Walt

    2015-11-12

    Specifically, the work under this CRADA includes, but is not limited to, the development of test procedures for an offshore test site in Delaware waters; testing of installed offshore wind turbines; performance monitoring of those turbines; and a program of research and development on offshore wind turbine blades, components, coatings, foundations, installation and construction of bottom-fixed structures, environmental impacts, policies, and more generally on means to enhance the reliability, facilitate permitting, and reduce costs for offshore wind turbines. This work will be conducted both at NREL's National Wind Technology Center and participant facilities, as well as the established offshore wind test sites.

  8. 78 FR 15951 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-13

    ... agreement. Agreement No.: 012196. Title: MSC/CSAV Ecuador--North Europe Vessel Sharing Agreement. Parties... on the U.S. East Coast on the one hand, and from ports on the U.S. East Coast to Panama and...

  9. 75 FR 11180 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-10

    ....gov . Agreement No.: 011730-003. Title: GWF/Dole Space Charter and Sailing Agreement. Parties: Dole... China-US Pacific Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties:...

  10. 40 CFR 35.1615 - Substate agreements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 CFR 33.240 (Intergovernmental agreements). A State may enter into an agreement with a substate... STATE AND LOCAL ASSISTANCE Cooperative Agreements for Protecting and Restoring Publicly Owned...

  11. 40 CFR 35.1615 - Substate agreements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 CFR 33.240 (Intergovernmental agreements). A State may enter into an agreement with a substate... STATE AND LOCAL ASSISTANCE Cooperative Agreements for Protecting and Restoring Publicly Owned...

  12. 40 CFR 35.1615 - Substate agreements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 CFR 33.240 (Intergovernmental agreements). A State may enter into an agreement with a substate... STATE AND LOCAL ASSISTANCE Cooperative Agreements for Protecting and Restoring Publicly Owned...

  13. 40 CFR 35.1615 - Substate agreements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 CFR 33.240 (Intergovernmental agreements). A State may enter into an agreement with a substate... STATE AND LOCAL ASSISTANCE Cooperative Agreements for Protecting and Restoring Publicly Owned...

  14. 40 CFR 35.1615 - Substate agreements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 CFR 33.240 (Intergovernmental agreements). A State may enter into an agreement with a substate... STATE AND LOCAL ASSISTANCE Cooperative Agreements for Protecting and Restoring Publicly Owned...

  15. 77 FR 61751 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-11

    ... Agreement. Parties: Crowley Latin America Services, LLC and A.P. Moller-Maersk A/S Filing Party: Wayne R... . Agreement No.: 012155-001. Title: MSC/Zim South America East Coast Vessel Sharing Agreement....

  16. Perceived distributed effort in team ball sports.

    PubMed

    Beniscelli, Violeta; Tenenbaum, Gershon; Schinke, Robert Joel; Torregrosa, Miquel

    2014-01-01

    In this study, we explored the multifaceted concept of perceived mental and physical effort in team sport contexts where athletes must invest individual and shared efforts to reach a common goal. Semi-structured interviews were conducted with a convenience sample of 15 Catalan professional coaches (3 women and 12 men, 3 each from the following sports: volleyball, basketball, handball, soccer, and water polo) to gain their views of three perceived effort-related dimensions: physical, psychological, and tactical. From a theoretical thematic analysis, it was found that the perception of effort is closely related to how effort is distributed within the team. Moreover, coaches viewed physical effort in relation to the frequency and intensity of the players' involvement in the game. They identified psychological effort in situations where players pay attention to proper cues, and manage emotions under difficult circumstances. Tactical effort addressed the decision-making process of players and how they fulfilled their roles while taking into account the actions of their teammates and opponents. Based on these findings, a model of perceived distributed effort was developed, which delineates the elements that compose each of the aforementioned dimensions. Implications of perceived distributed effort in team coordination and shared mental models are discussed. PMID:24404807

  17. Perceived distributed effort in team ball sports.

    PubMed

    Beniscelli, Violeta; Tenenbaum, Gershon; Schinke, Robert Joel; Torregrosa, Miquel

    2014-01-01

    In this study, we explored the multifaceted concept of perceived mental and physical effort in team sport contexts where athletes must invest individual and shared efforts to reach a common goal. Semi-structured interviews were conducted with a convenience sample of 15 Catalan professional coaches (3 women and 12 men, 3 each from the following sports: volleyball, basketball, handball, soccer, and water polo) to gain their views of three perceived effort-related dimensions: physical, psychological, and tactical. From a theoretical thematic analysis, it was found that the perception of effort is closely related to how effort is distributed within the team. Moreover, coaches viewed physical effort in relation to the frequency and intensity of the players' involvement in the game. They identified psychological effort in situations where players pay attention to proper cues, and manage emotions under difficult circumstances. Tactical effort addressed the decision-making process of players and how they fulfilled their roles while taking into account the actions of their teammates and opponents. Based on these findings, a model of perceived distributed effort was developed, which delineates the elements that compose each of the aforementioned dimensions. Implications of perceived distributed effort in team coordination and shared mental models are discussed.

  18. Measurement Challenges in International Agreements

    NASA Astrophysics Data System (ADS)

    Luke, John

    2006-10-01

    Making measurements in support of international agreements can pose many challenges both from a policy and science point of view. Policy issues may arise because physics measurements made in the area of arms control or disarmament may be deemed too intrusive since they could possibly reveal sensitive information about the material that is being interrogated. Therefore, agreements must include a framework for safeguarding against the potential release of this information. Most of the scientific issues center around the fact that it is desirable to make high quality measurements without any operator interaction. This leads to the development of instrumentation and software that are very stable and robust. Due to different concerns, policy and science priorities may be at odds with one another. Therefore, it is the scientist's challenge - in this field - to keep policy makers informed by conveying what is technically possible and what is not in a manner that is easily understood and also negotiable. In this paper we will discuss some of the technology that has been developed to address some of these challenges in various international and model agreements. We will discuss the principle of informational barrier used in these measurement technologies to safeguard the release of sensitive information. We will also discuss some of the pitfalls that may arise when policy is ill informed about the physical constraints in the making of measurements of nuclear materials.

  19. Final Report of a CRADA Between Pacific Northwest National Laboratory and the General Motors Company (CRADA No. PNNL/271): “Degradation Mechanisms of Urea Selective Catalytic Reduction Technology”

    SciTech Connect

    Kim, Do Heui; Lee, Jong H.; Peden, Charles HF; Howden, Ken; Kim, Chang H.; Oh, Se H.; Schmieg, Steven J.; Wiebenga, Michelle H.

    2011-12-13

    Diesel engines can offer substantially higher fuel efficiency, good driving performance characteristics, and reduced carbon dioxide (CO2) emission compared to stoichiometric gasoline engines. Despite the increasing public demand for higher fuel economy and reduced dependency on imported oil, however, meeting the stringent emission standards with affordable methods has been a major challenge for the wide application of these fuel-efficient engines in the US market. The selective catalytic reduction of NOx by urea (urea-SCR) is one of the most promising technologies for NOx emission control for diesel engine exhausts. To ensure successful NOx emission control in the urea-SCR technology, both a diesel oxidation catalyst (DOC) and a urea-SCR catalyst with high activity and durability are critical for the emission control system. Because the use of this technology for light-duty diesel vehicle applications is new, the relative lack of experience makes it especially challenging to satisfy the durability requirements. Of particular concern is being able to realistically simulate actual field aging of the catalyst systems under laboratory conditions, which is necessary both as a rapid assessment tool for verifying improved performance and certifiability of new catalyst formulations. In addition, it is imperative to develop a good understanding of deactivation mechanisms to help develop improved catalyst materials. In this CRADA program, General Motors Company and PNNL have investigated fresh, laboratory- and vehicle-aged DOC and SCR catalysts. The studies have led to a better understanding of various aging factors that impact the long-term performance of catalysts used in the urea-SCR technology, and have improved the correlation between laboratory and vehicle aging for reduced development time and cost. This Final Report briefly highlights many of the technical accomplishments and documents the productivity of the program in terms of peer-reviewed scientific publications

  20. Clinical Trials Reference Materials and Related Links | Division of Cancer Prevention

    Cancer.gov

    Agreements Clinical Trials Agreement Confidential Disclosure Agreements Cooperative Research and Development Agreement (CRADA) - Research Plan Financial and Staffing Contribution of the Parties Exception or Modifications to the CRADA Human Subject Protection/Informed Consent Tutorials (or Education) |

  1. Productive and Ineffective Efforts: How Student Effort in High School Mathematics Relates to College Calculus Success

    ERIC Educational Resources Information Center

    Barnett, M.D.; Sonnert, G.; Sadler, P.M.

    2014-01-01

    Relativizing the popular belief that student effort is the key to success, this article finds that effort in the most advanced mathematics course in US high schools is not consistently associated with college calculus performance. We distinguish two types of student effort: productive and ineffective efforts. Whereas the former carries the…

  2. Great Lakes agreement calls for binational science priorities and action

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2012-09-01

    An amended Great Lakes Water Quality Agreement (GLWQA), signed by officials from Canada and the United States at a 7 September ceremony in Washington, D. C., will facilitate efforts by the two countries to “restore and maintain the chemical, physical, and biological integrity of the Waters of the Great Lakes.” The agreement calls on the countries to cooperate and collaborate; develop programs, practices, and technology necessary to better understand the Great Lakes Basin ecosystem; and eliminate or reduce environmental threats to Great Lakes waters. The amended GLWQA specifically calls for the establishment of “binational priorities for science and action to address current and future threats” to the quality of Great Lakes waters within 18 months. In addition, the agreement calls on the International Joint Commission (IJC) to establish a Great Lakes science advisory board.

  3. International Agreement Will Advance Radio Astronomy

    NASA Astrophysics Data System (ADS)

    2007-12-01

    Two of the world's leading astronomical institutions have formalized an agreement to cooperate on joint efforts for the technical and scientific advancement of radio astronomy. The National Radio Astronomy Observatory (NRAO) in the United States and the Max-Planck Institute for Radioastronomy (MPIfR) in Germany concluded a Memorandum of Understanding outlining planned collaborative efforts to enhance the capabilities of each other's telescopes and to expand their cooperation in scientific research. The VLBA The VLBA CREDIT: NRAO/AUI/NSF In the first project pursued under this agreement, the MPIfR will contribute $299,000 to upgrade the continent-wide Very Long Baseline Array's (VLBA) capability to receive radio emissions at a frequency of 22 GHz. This improvement will enhance the VLBA's scientific productivity and will be particularly important for cutting-edge research in cosmology and enigmatic cosmic objects such as gamma-ray blazars. "This agreement follows many years of cooperation between our institutions and recognizes the importance of international collaboration for the future of astronomical research," said Fred K.Y. Lo, NRAO Director. "Our two institutions have many common research goals, and joining forces to keep all our telescopes at the forefront of technology will be highly beneficial for the science," said Anton Zensus, Director at MPIfR. In addition to the VLBA, the NRAO operates the Very Large Array (VLA) in New Mexico and the Robert C. Byrd Green Bank Telescope (GBT) in West Virginia. The MPIfR operates the 100-meter Effelsberg Radio Telescope in Germany and the 12-meter APEX submillimeter telescope in 5100 m altitude in the Cilean Atacama desert (together with the European Southern Observatory and the Swedish Onsala Space Observatory). With the 100-meter telescope, it is part of the VLBA network in providing transatlantic baselines. Both institutions are members of a global network of telescopes (the Global VLBI Network) that uses simultaneous

  4. Dopamine and Effort-Based Decision Making

    PubMed Central

    Kurniawan, Irma Triasih; Guitart-Masip, Marc; Dolan, Ray J.

    2011-01-01

    Motivational theories of choice focus on the influence of goal values and strength of reinforcement to explain behavior. By contrast relatively little is known concerning how the cost of an action, such as effort expended, contributes to a decision to act. Effort-based decision making addresses how we make an action choice based on an integration of action and goal values. Here we review behavioral and neurobiological data regarding the representation of effort as action cost, and how this impacts on decision making. Although organisms expend effort to obtain a desired reward there is a striking sensitivity to the amount of effort required, such that the net preference for an action decreases as effort cost increases. We discuss the contribution of the neurotransmitter dopamine (DA) toward overcoming response costs and in enhancing an animal's motivation toward effortful actions. We also consider the contribution of brain structures, including the basal ganglia and anterior cingulate cortex, in the internal generation of action involving a translation of reward expectation into effortful action. PMID:21734862

  5. Visual Cues and Listening Effort: Individual Variability

    ERIC Educational Resources Information Center

    Picou, Erin M.; Ricketts, Todd A; Hornsby, Benjamin W. Y.

    2011-01-01

    Purpose: To investigate the effect of visual cues on listening effort as well as whether predictive variables such as working memory capacity (WMC) and lipreading ability affect the magnitude of listening effort. Method: Twenty participants with normal hearing were tested using a paired-associates recall task in 2 conditions (quiet and noise) and…

  6. The Effect of Age on Listening Effort

    ERIC Educational Resources Information Center

    Degeest, Sofie; Keppler, Hannah; Corthals, Paul

    2015-01-01

    Purpose: The objective of this study was to investigate the effect of age on listening effort. Method: A dual-task paradigm was used to evaluate listening effort in different conditions of background noise. Sixty adults ranging in age from 20 to 77 years were included. A primary speech-recognition task and a secondary memory task were performed…

  7. Attention, effort, and fatigue: Neuropsychological perspectives

    NASA Technical Reports Server (NTRS)

    Cohen, Ronald A.; Odonnell, Brian F.

    1988-01-01

    Models of attention, effort, and fatigue are reviewed. Methods are discussed for measuring these phenomena from a neuropsychological and psychophysiological perspective. The following methodologies are included: (1) the autonomic measurement of cognitive effort and quality of encoding; (2) serial assessment approaches to neurophysiological assessment; and (3) the assessment of subjective reports of fatigue using multidimensional ratings and their relationship to neurobehavioral measures.

  8. Parental Effort, School Resources, and Student Achievement

    ERIC Educational Resources Information Center

    Houtenville, Andrew J.; Conway, Karen Smith

    2008-01-01

    This article investigates an important factor in student achievement--parental involvement. Using data from the National Education Longitudinal Study (NELS), we estimate a value-added education production function that includes parental effort as an input. Parental effort equations are also estimated as a function of child, parent, household, and…

  9. 32 CFR 78.7 - Standard agreement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Standard agreement. 78.7 Section 78.7 National... VOLUNTARY STATE TAX WITHHOLDING FROM RETIRED PAY § 78.7 Standard agreement. Standard Agreement For Voluntary..., hereafter referred to as the “Standard Agreement,” establishes administrative procedures and...

  10. 48 CFR 3416.702 - Basic agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Basic agreements. 3416.702... CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Agreements 3416.702 Basic agreements. (a)-(d) (e) Negotiated overhead rates. Basic agreements may include negotiated overhead rates for...

  11. 78 FR 26779 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-08

    ... reflects the suspension of the agreement, effective May 1, 2013 through April 14, 2015. Agreement No... the fact that the parties have agreed to charter and rationalize vessel space among themselves and...). Agreement No.: 012206. Title: Industria Armamento Meridionale S.P.A./K-Line Space Charter Agreement....

  12. 2 CFR 182.620 - Cooperative agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... agreement. Cooperative agreement means an award of financial assistance that, consistent with 31 U.S.C. 6305... development agreements as defined in 15 U.S.C. 3710a. ... MANAGEMENT AND BUDGET GOVERNMENTWIDE GUIDANCE FOR GRANTS AND AGREEMENTS NATIONAL POLICY...

  13. 5 CFR 2421.20 - Election agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Election agreement. 2421.20 Section 2421... Election agreement. Election agreement means an agreement under part 2422 of this subchapter signed by all... representation election in an appropriate unit....

  14. 5 CFR 2421.20 - Election agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Election agreement. 2421.20 Section 2421... Election agreement. Election agreement means an agreement under part 2422 of this subchapter signed by all... representation election in an appropriate unit....

  15. 5 CFR 2421.20 - Election agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Election agreement. 2421.20 Section 2421... Election agreement. Election agreement means an agreement under part 2422 of this subchapter signed by all... representation election in an appropriate unit....

  16. 5 CFR 2421.20 - Election agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 3 2014-01-01 2014-01-01 false Election agreement. 2421.20 Section 2421... Election agreement. Election agreement means an agreement under part 2422 of this subchapter signed by all... representation election in an appropriate unit....

  17. 5 CFR 2421.20 - Election agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Election agreement. 2421.20 Section 2421... Election agreement. Election agreement means an agreement under part 2422 of this subchapter signed by all... representation election in an appropriate unit....

  18. 7 CFR 1948.98 - Grant agreements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 13 2013-01-01 2013-01-01 false Grant agreements. 1948.98 Section 1948.98 Agriculture... § 1948.98 Grant agreements. The following Grant Agreements are a part of this regulation. (a) Exhibit A of this subpart is a Grant Agreement for Growth Management and Housing Planning Grants for...

  19. 7 CFR 1948.98 - Grant agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 13 2011-01-01 2009-01-01 true Grant agreements. 1948.98 Section 1948.98 Agriculture... § 1948.98 Grant agreements. The following Grant Agreements are a part of this regulation. (a) Exhibit A of this subpart is a Grant Agreement for Growth Management and Housing Planning Grants for...

  20. 7 CFR 1415.11 - Restoration agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Restoration agreements. 1415.11 Section 1415.11... Restoration agreements. (a) Restoration agreements are only authorized to be used in conjunction with... a restoration agreement is needed. Such a determination is also subject to the availability...

  1. 7 CFR 1415.11 - Restoration agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Restoration agreements. 1415.11 Section 1415.11... Restoration agreements. (a) Restoration agreements are only authorized to be used in conjunction with... a restoration agreement is needed. Such a determination is also subject to the availability...

  2. 7 CFR 947.111 - Marketing agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended....

  3. 7 CFR 947.111 - Marketing agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended....

  4. 46 CFR 356.41 - Management agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Management agreements. 356.41 Section 356.41 Shipping..., Management Agreements and Exclusive or Long-Term Contracts § 356.41 Management agreements. (a) An owner or bareboat charterer of a Fishing Industry Vessel may enter into a management agreement with a Non-Citizen...

  5. 25 CFR 163.71 - Agreement funding.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  6. 25 CFR 163.71 - Agreement funding.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  7. 25 CFR 163.71 - Agreement funding.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  8. 25 CFR 163.71 - Agreement funding.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  9. 25 CFR 163.71 - Agreement funding.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  10. 77 FR 10743 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    ... . Agreement No.: 011353-036. Title: The Credit Agreement. Parties: Crowley Latin America Services, LLC; Dole..., DC 20006-4007. Synopsis: The amendment deletes Crowley Latin American Services, LLC and a King Ocean entity as a party to the Agreement. Agreement No.: 012155. Title: MSC/Zim South America East Coast...

  11. 7 CFR 947.111 - Marketing agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended....

  12. 7 CFR 947.111 - Marketing agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended....

  13. 7 CFR 947.111 - Marketing agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended....

  14. 27 CFR 70.485 - Closing agreements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Closing agreements. 70.485... Relating to Alcohol, Tobacco, Firearms, and Explosives Administrative Remedies § 70.485 Closing agreements... taxable period ending prior or subsequent to the date of such agreement. A closing agreement may...

  15. 27 CFR 70.485 - Closing agreements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Closing agreements. 70.485... Relating to Alcohol, Tobacco, Firearms, and Explosives Administrative Remedies § 70.485 Closing agreements... taxable period ending prior or subsequent to the date of such agreement. A closing agreement may...

  16. 27 CFR 70.485 - Closing agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Closing agreements. 70.485... Relating to Alcohol, Tobacco, Firearms, and Explosives Administrative Remedies § 70.485 Closing agreements... taxable period ending prior or subsequent to the date of such agreement. A closing agreement may...

  17. 27 CFR 70.485 - Closing agreements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Closing agreements. 70.485... Relating to Alcohol, Tobacco, Firearms, and Explosives Administrative Remedies § 70.485 Closing agreements... taxable period ending prior or subsequent to the date of such agreement. A closing agreement may...

  18. 27 CFR 70.485 - Closing agreements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Closing agreements. 70.485... Relating to Alcohol, Tobacco, Firearms, and Explosives Administrative Remedies § 70.485 Closing agreements... taxable period ending prior or subsequent to the date of such agreement. A closing agreement may...

  19. 40 CFR 46.170 - Fellowship agreement.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Fellowship agreement. 46.170 Section 46... FELLOWSHIPS Award § 46.170 Fellowship agreement. (a) The “Fellowship Agreement” (EPA Form 5770-8) is the written agreement, including amendments, between EPA and you. The fellowship agreement will state...

  20. 40 CFR 46.170 - Fellowship agreement.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Fellowship agreement. 46.170 Section 46... FELLOWSHIPS Award § 46.170 Fellowship agreement. (a) The “Fellowship Agreement” (EPA Form 5770-8) is the written agreement, including amendments, between EPA and you. The fellowship agreement will state...

  1. 40 CFR 46.170 - Fellowship agreement.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Fellowship agreement. 46.170 Section 46... FELLOWSHIPS Award § 46.170 Fellowship agreement. (a) The “Fellowship Agreement” (EPA Form 5770-8) is the written agreement, including amendments, between EPA and you. The fellowship agreement will state...

  2. 40 CFR 46.170 - Fellowship agreement.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Fellowship agreement. 46.170 Section 46... FELLOWSHIPS Award § 46.170 Fellowship agreement. (a) The “Fellowship Agreement” (EPA Form 5770-8) is the written agreement, including amendments, between EPA and you. The fellowship agreement will state...

  3. 40 CFR 46.170 - Fellowship agreement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Fellowship agreement. 46.170 Section 46... FELLOWSHIPS Award § 46.170 Fellowship agreement. (a) The “Fellowship Agreement” (EPA Form 5770-8) is the written agreement, including amendments, between EPA and you. The fellowship agreement will state...

  4. Personal effort in social relationships across adulthood.

    PubMed

    Lang, Frieder R; Wagner, Jenny; Wrzus, Cornelia; Neyer, Franz J

    2013-06-01

    We explored age differences in the amount of personal effort that people put forth to maintain relationships across adulthood in diverse family-life contexts. More specifically, we examined how personal effort in social relationships is age-differently related to emotional closeness and perceptions of reciprocity. A total of 658 early-midlife (37 years) and old-age adults (73 years) from three life contexts (biological parents, parents from blended families with at least one stepchild, childless individuals) completed a questionnaire assessing ego-centered social networks, relationship quality, perceived conflict, and personal characteristics. As expected, perceived relationship effort was more pronounced and more strongly associated with emotional closeness in old age than in early midlife. In both age groups, perceived effort was comparably associated with reciprocity and conflict. Such associations were similar across the different life contexts. The findings suggest that perceived personal effort in social relationships contributes to the proactive shaping of social worlds across adulthood. PMID:23586359

  5. Removal of heteroatoms and metals from heavy oils by bioconversion processes. CRADA final report

    SciTech Connect

    Kaufman, E N; Borole, A P

    1999-03-01

    The objective of this Cooperative research and Development Agreement project between Oak Ridge National Laboratory ( O W ) and Baker Performance Chemicals (BPC), Chevron, Energy BioSystems, Exxon, UNOCAL and Texaco is to investigate the biological desukrization of crude oil. Biological removal of organic s&%r fiom crude oil offers an attractive alternative to conventional thermochemical treatment due to the mild operating conditions afforded by the biocatalyst. In order for biodesulfbrization to realize commercial success, reactors must be designed which allow for sufficient liquid / liquid and gas / liquid mass transfer while simultaneously reducing operating costs. To this end we have been developing advanced bioreactors for biodesufirization and have been studying their performance using both actual crude oil as well as more easily characterized model systems.

  6. Biochemical basis of drought tolerance in hybrid Populus grown under field production conditions. CRADA final report

    SciTech Connect

    Tschaplinski, T.J.; Tuskan, G.A.; Wierman, C.

    1997-04-01

    The purpose of this cooperative effort was to assess the use of osmotically active compounds as molecular selection criteria for drought tolerance in Populus in a large-scale field trial. It is known that some plant species, and individuals within a plant species, can tolerate increasing stress associated with reduced moisture availability by accumulating solutes. The biochemical matrix of such metabolites varies among species and among individuals. The ability of Populus clones to tolerate drought has equal value to other fiber producers, i.e., the wood products industry, where irrigation is used in combination with other cultural treatments to obtain high dry weight yields. The research initially involved an assessment of drought stress under field conditions and characterization of changes in osmotic constitution among the seven clones across the six moisture levels. The near-term goal was to provide a mechanistic basis for clonal differences in productivity under various irrigation treatments over time.

  7. International Agreement on Planetary Protection

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The maintenance of a NASA policy, is consistent with international agreements. The planetary protection policy management in OSS, with Field Center support. The advice from internal and external advisory groups (NRC, NAC/Planetary Protection Task Force). The technology research and standards development in bioload characterization. The technology research and development in bioload reduction/sterilization. This presentation focuses on: forward contamination - research on the potential for Earth life to exist on other bodies, improved strategies for planetary navigation and collision avoidance, and improved procedures for sterile spacecraft assembly, cleaning and/or sterilization; and backward contamination - development of sample transfer and container sealing technologies for Earth return, improvement in sample return landing target assessment and navigation strategy, planning for sample hazard determination requirements and procedures, safety certification, (liaison to NEO Program Office for compositional data on small bodies), facility planning for sample recovery system, quarantine, and long-term curation of 4 returned samples.

  8. Programming effort analysis of the ELLPACK language

    NASA Technical Reports Server (NTRS)

    Rice, J. R.

    1978-01-01

    ELLPACK is a problem statement language and system for elliptic partial differential equations which is implemented by a FORTRAN preprocessor. ELLPACK's principal purpose is as a tool for the performance evaluation of software. However, it is used here as an example with which to study the programming effort required for problem solving. It is obvious that problem statement languages can reduce programming effort tremendously; the goal is to quantify this somewhat. This is done by analyzing the lengths and effort (as measured by Halstead's software science technique) of various approaches to solving these problems.

  9. Post-Injection Geophysical Evaluation of the Winding Ridge Site CRADA 98-F012, Final Report

    SciTech Connect

    Connie Lyons; Richard Current; Terry Ackman

    1998-09-16

    Acid mine drainage (AMD) from underground mines is a major environmental problem. The disposal of coal combustion by-products (CCB) is also a major national problem due to the large volumes produced annually and the economics associated with transportation and environmentally safe disposal. The concept of returning large volumes of the CCB to their point of origin, underground mines, and using the typically alkaline and pozzolanic attributes of the waste material for the remediation of AMD has been researched rather diligently during the past few years by various federal and state agencies and universities. As the result, the State of Maryland initiated a full-scale demonstration of this concept in a small, 5-acre, unmapped underground mine located near Friendsville, MD. Through a cooperative agreement between the State of Maryland and the U.S. Department of Energy, several geophysical techniques were evaluated as potential tools for the post-injection evaluation of the underground mine site. Three non-intrusive geophysical surveys, two electromagnetic (EM) techniques and magnetometry, were conducted over the Frazee Mine, which is located on Winding Ridge near Friendsville, MD. The EM surveys were conducted to locate ground water in both mine void and overburden. The presence of magnetite, which is naturally inherent to CCB'S due to the combustion process and essentially transparent in sedimentary rock, provided the reason for using magnetometry to locate the final resting place of the CCB grout.

  10. Cataloging Practices in India: Efforts for Standardization.

    ERIC Educational Resources Information Center

    Tikku, Upinder Kumar

    1984-01-01

    Surveys current cataloging practices in Indian libraries and discusses standardization in cataloging, types of catalogs, cataloging codes (Anglo-American and Ranganathan), subject headings, descriptive cataloging, and standardization efforts (international, United States, USSR, Great Britain, India). Footnotes are included. (EJS)

  11. Facets of job effort in bus driver health: deconstructing "effort" in the effort-reward imbalance model.

    PubMed

    Tse, John L M; Flin, Rhona; Mearns, Kathryn

    2007-01-01

    This research aimed to test the relative value of developing and using job-specific facets of effort and testing them using J. Siegrist's (1996) effort-reward imbalance (ERI) theory to extend understanding of how one might determine job strain in urban bus driving. In addition, the interactive effects of the ERI model are further investigated to address the lack of research into the relationships of the model's constructs. Using focus groups and published papers, a measure of bus driver effort was created, which was subsequently completed by 186 male U.K. bus drivers as part of a questionnaire study. The results were factor analyzed to create 4 facets of effort, which demonstrated additional variance in predicting strain, above and beyond J. Siegrist's original effort construct. One facet, workload and fatigue, was observed to be a particularly important contributor to strain. The analyses further indicated that the ERI model's assumptions that ERI creates job strain could not be completely upheld, although poorer levels of reward and higher levels of overcommitment were strong main predictors of job strain. Research and applied implications are considered.

  12. Monolithic circuits for barium fluoride detectors used in nuclear physics experiments. CRADA final report

    SciTech Connect

    Varner, R.L.; Blankenship, J.L.; Beene, J.R.; Todd, R.A.

    1998-02-01

    Custom monolithic electronic circuits have been developed recently for large detector applications in high energy physics where subsystems require tens of thousands of channels of signal processing and data acquisition. In the design and construction of these enormous detectors, it has been found that monolithic circuits offer significant advantages over discrete implementations through increased performance, flexible packaging, lower power and reduced cost per channel. Much of the integrated circuit design for the high energy physics community is directly applicable to intermediate energy heavy-ion and electron physics. This STTR project conducted in collaboration with researchers at the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Laboratory, sought to develop a new integrated circuit chip set for barium fluoride (BaF{sub 2}) detector arrays based upon existing CMOS monolithic circuit designs created for the high energy physics experiments. The work under the STTR Phase 1 demonstrated through the design, simulation, and testing of several prototype chips the feasibility of using custom CMOS integrated circuits for processing signals from BaF{sub 2} detectors. Function blocks including charge-sensitive amplifiers, comparators, one shots, time-to-amplitude converters, analog memory circuits and buffer amplifiers were implemented during Phase 1 effort. Experimental results from bench testing and laboratory testing with sources were documented.

  13. Relationship Power, Sociodemographics, and Their Relative Influence on Sexual Agreements Among Gay Male Couples.

    PubMed

    Perry, Nicholas S; Huebner, David M; Baucom, Brian R; Hoff, Colleen C

    2016-06-01

    Men who have sex with men (MSM) in primary relationships engage in condomless sex both within and outside their relationships and a majority of HIV transmission risk may actually occur within primary relationships. Sexual agreements regarding non-monogamy are a critical component to understanding HIV prevention in male couples. Relationship factors have been associated with how sexual agreements function and power is one dyadic construct likely to affect couple's maintenance of non-monogamy agreements. Multilevel modeling was used in a cross-sectional study of gay male couples (N = 566 couples) to examine associations between partners' demographic characteristics traditionally used to define relationship power, a scale of decision-making power, and outcomes related to sexual agreements, including investment, agreement breaks, and break disclosure. Results indicated that decision-making power relative to one's partner was not associated with any agreement outcome, contrary to hypotheses. However, controlling for decision-making power, demographic bases of power were variably associated with sexual agreements' functioning. Younger partners were less invested in and more frequently broke their agreements. Lower-earning partners broke their agreements more frequently, but also disclosed breaks more often. White men in white-minority relationships broke their agreement more often than their partners. Concordant HIV-positive couples were less invested in their agreements and HIV-positive men disclosed breaks more frequently. HIV prevention efforts for same-sex couples must attend to the social, developmental, and cultural influences that affect their agreements around non-monogamy.

  14. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  15. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  16. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT, AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  17. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  18. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  19. Perceptions of patient provider agreements

    PubMed Central

    Albrecht, Jennifer S.; Khokhar, Bilal; Pradel, Françoise; Campbell, Michelle; Palmer, Jacqueline; Harris, Ilene; Palumbo, Francis

    2016-01-01

    Objectives Use of patient provider agreements (PPAs) is increasing, yet there is limited evidence on the effectiveness of PPAs to prevent prescription opioid misuse and diversion, and few guidelines for providers. We conducted eight focus groups to understand patient and prescriber perceptions of PPAs. Methods We recruited 40 patients who had been asked to sign a PPA and 40 prescribers who had administered at least one PPA. We developed topic guides for the two groups based on prior literature. Focus groups were audio-recorded and transcribed verbatim. Two investigators independently performed the content analysis of the transcripts and reached consensus on recurring themes. Key findings PPA use varied according to physician specialty. General practitioners used PPAs the least but reported increasing pressure from liability insurers to use them. Many patients reported signing a PPA in the emergency room of a hospital. Prescribers and patients reported a lack of understanding among patients concerning the purpose and content of the PPA. Prescribers questioned the legal status of the PPA, while patients believed that the PPA was a legal document intended to protect prescribers. Patients and prescribers valued PPA content items differently, although both groups agreed that signing a PPA would not prevent opioid misuse. Conclusions We identified several themes concerning the administration, content, effectiveness and utility of PPAs that highlight areas of research to improve PPAs. We also describe trends requiring further investigation. Understanding content of importance to patients will facilitate the development of a patient-centred PPA. PMID:27293486

  20. Monitoring of Biomedical License Agreements

    PubMed Central

    Keller, George H.; Ferguson, Steven M.; Pan, Percy

    2009-01-01

    Because technology licensed from research organizations can play a significant role in drug innovation and the generation of novel biomedical products, licensee performance under such agreements must be effectively monitored. This is necessary so that resultant benefits, including public health improvement, may be returned to the innovator(s) as well as society at large. The tasks that comprise monitoring are varied, but all come under the general heading of ‘enforcement of license provisions’. Since 1996, the license monitoring and enforcement program established by the US National Institutes of Health (NIH) Group has collected about $US17 million in unpaid and underpaid license royalties through formal financial audits and other investigative activities. During the same period, the Office of Technology Transfer (OTT) settled more than 60 cases of suspected patent infringement, generating around 60 new licenses and collected both back and ongoing royalties. As these numbers show, an active and effective monitoring program is an essential part of any technology transfer or biomedical licensing program. PMID:19960074

  1. 14 CFR 437.35 - Agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Operational Safety Documentation § 437.35 Agreements. An applicant must enter into the agreements required by § 437.63, and...

  2. 14 CFR 437.35 - Agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... TRANSPORTATION LICENSING EXPERIMENTAL PERMITS Requirements to Obtain an Experimental Permit Operational Safety Documentation § 437.35 Agreements. An applicant must enter into the agreements required by § 437.63, and...

  3. 75 FR 61757 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-06

    ....: 012071-001. Title: APL/Hanjin Reciprocal Space Charter Agreement. Parties: American President Lines, Ltd... Agreement. Parties: Eagle Marine Services, Ltd.; Ports of America Outer Harbor Terminal, LLC; Port...

  4. 75 FR 150 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... the members to address issues relating to environmental initiatives and the reduction of air and water pollution. Agreement No.: 012008-004. Title: The 360 Quality Association Agreement. Parties: NYKCool AB...

  5. 76 FR 12962 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-09

    ....gov . Agreement No.: 011885-002. Title: CMA CGM/MSC Reciprocal Space Charter, Sailing and Cooperative... Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties: A.P. Moller-Maersk...

  6. 37 CFR 42.409 - Settlement agreements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OF COMMERCE TRIAL PRACTICE BEFORE THE PATENT TRIAL AND APPEAL BOARD Derivation After Institution of Derivation Proceeding § 42.409 Settlement agreements. An agreement or understanding under 35 U.S.C. 135(e)...

  7. 75 FR 31438 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-03

    ... Lines Joint Service Agreement. Filing Party: Tara L. Leiter, Esq.; Blank Rome, LLP; Watergate; 600 New... Service Agreement. Filing Party: Tara L. Leiter, Esq.; Blank Rome, LLP; Watergate; 600 New...

  8. 47 CFR 51.303 - Preexisting agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) INTERCONNECTION... interconnection agreements between an incumbent LEC and a telecommunications carrier, including those negotiated... approval pursuant to section 252(e) of the Act. (b) Interconnection agreements negotiated before February...

  9. 77 FR 71001 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-28

    ..., updates both parties address, and various other changes. Agreement No.: 012187-000. Title: Siem Car Carrier Pacific AS/Hoegh Autoliners, Inc. Space Charter Agreement. Parties: Siem Car Carrier Pacific...

  10. 32 CFR 37.1260 - Cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1260 Cooperative... the cooperative agreement. The term does not include “cooperative research and development...

  11. 77 FR 1689 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-11

    ... . Agreement No.: 012150. Title: COSCON/POS Space Charter and Sailing Agreement. Parties: COSCO Container Lines... COSCO to charter space to Hainan POS in the trade between U.S. West Coast ports and ports in China...

  12. 75 FR 20849 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-21

    .... Agreement No.: 011075-073. Title: Central America Discussion Agreement. Parties: APL Co. PTE Ltd.; Crowley Latin America Services, LLC.; Dole Ocean Cargo Express; Great White Fleet; King Ocean Services...

  13. Productive and ineffective efforts: how student effort in high school mathematics relates to college calculus success

    NASA Astrophysics Data System (ADS)

    Barnett, M. D.; Sonnert, G.; Sadler, P. M.

    2014-10-01

    Relativizing the popular belief that student effort is the key to success, this article finds that effort in the most advanced mathematics course in US high schools is not consistently associated with college calculus performance. We distinguish two types of student effort: productive and ineffective efforts. Whereas the former carries the commonly expected benefits, the latter is associated with negative consequences. Time spent reading the course text in US high schools was negatively related to college calculus performance. Daily study time, however, was found to be either a productive or an ineffective effort, depending on the level of high school mathematics course and the student's performance in it.

  14. Phase 1 STTR flywheel motor/alternator for hybrid electric vehicles. CRADA final report

    SciTech Connect

    McKeever, J.W.; Scudiere, M.B.; Ott, G.W. Jr.; White, C.P.; Kessinger, R.L. Jr.; Robinson, S.T.; Seymour, K.P.; Dockstadter, K.D.

    1997-12-31

    Visual Computing Systems (VCS) and the Oak Ridge National Laboratory (ORNL) have teamed, through a Phase 1 Small Business Technology Transfer (STTR) grant from the US Department of Energy (DOE), to develop an advanced, low-cost motor/alternator drive system suitable for Flywheel Energy Storage (FES) applications. During Phase 1, system performance and design requirements were established, design concepts were generated, and preliminary motor/alternator designs were developed and analyzed. ORNL provided mechanical design and finite element collaboration and Lynx Motion Technology, a spin-off from VCS to commercialize their technology, constructed a proof-of-concept axial-gap permanent magnet motor/alternator that employed their Segmented Electromagnetic Array (SEMA) with a survivable design speed potential of 10,000 rpm. The VCS motor/alternator was successfully tested in ORNL`s Motor Test Tank using an ORNL inverter and ORNL control electronics. It was first operated as an unloaded motor to 6,000 rpm and driven as an unloaded generator to 6,000 rpm. Output from the generator was then connected to a resistance bank, which caused the loaded generator to decelerate to 3,860 rpm where data was collected. After about 4-1/2 minutes, the test was terminated because of an impact noise. Subsequent inspection and operation at low speeds did not reveal the source of the noise. Electrical performance of the motor was excellent, encouraging continued development of this technology. Phase 2 efforts will focus on further design development and optimization, manufacturing development and prototype construction, testing, and evaluation.

  15. Legal issues critical in software license agreements.

    PubMed

    Manfredi, M J; Peterson, D M

    1989-05-01

    The complex legal aspects of software license agreements are addressed in this final part of a three-part series. A healthcare organization that has selected a software vendor and has reviewed the central provisions of a licensing agreement must then take a close look at the other provisions of the agreement. These include numerous legal provisions, regulatory requirements, and ancillary agreements related to maintenance and access to the software.

  16. Vocal effort and voice handicap among teachers.

    PubMed

    Sampaio, Márcio Cardoso; dos Reis, Eduardo José Farias Borges; Carvalho, Fernando Martins; Porto, Lauro Antonio; Araújo, Tânia Maria

    2012-11-01

    The relationship between voice handicap and professional vocal effort was investigated among teachers in a cross-sectional study of census nature on 4496 teachers within the public elementary education network in Salvador, Bahia, Brazil. Voice handicap (the outcome of interest) was evaluated using the Voice Handicap Index 10. The main exposure, the lifetime vocal effort index, was obtained as the product of the number of years working as a teacher multiplied by the mean weekly working hours. The prevalence of voice handicap was 28.8% among teachers with high professional vocal effort and 21.3% among those with acceptable vocal effort, thus yielding a crude prevalence ratio (PR) of 1.36 (95% confidence interval [CI]=1.14-1.61). In the final logistic model, the prevalence of voice handicap was statistically associated with the professional vocal effort index (PR=1.47; 95% CI=1.19-1.82), adjusted according to sex, microphone availability in the classroom, excessive noise, pressure from the school management, heartburn, and rhinitis.

  17. A Performance Evaluation of the Collaborative Efforts in an Online Group Research Project

    ERIC Educational Resources Information Center

    Brown, Lori A.; Eastham, Nicholas P.; Ku, Heng-Yu

    2006-01-01

    This study investigated the performance of 13 graduate students' collaborative efforts toward a group research project in an Instructional Analysis, Design, and Evaluation online course. Gaps between course expectations from the instructor and student collaborative performance were identified through the review of the team agreement, the use of…

  18. 34 CFR 84.620 - Cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Cooperative agreement. 84.620 Section 84.620 Education Office of the Secretary, Department of Education GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Definitions § 84.620 Cooperative agreement. Cooperative agreement means an award...

  19. 23 CFR 633.206 - Project agreements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Project agreements. 633.206 Section 633.206 Highways... CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.206 Project agreements. (a) Project agreements executed for projects under the Appalachian program shall contain the following paragraphs:...

  20. 23 CFR 633.206 - Project agreements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Project agreements. 633.206 Section 633.206 Highways... CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.206 Project agreements. (a) Project agreements executed for projects under the Appalachian program shall contain the following paragraphs:...

  1. 23 CFR 633.206 - Project agreements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Project agreements. 633.206 Section 633.206 Highways... CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.206 Project agreements. (a) Project agreements executed for projects under the Appalachian program shall contain the following paragraphs:...

  2. 23 CFR 633.206 - Project agreements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Project agreements. 633.206 Section 633.206 Highways... CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.206 Project agreements. (a) Project agreements executed for projects under the Appalachian program shall contain the following paragraphs:...

  3. 19 CFR 118.3 - Written agreement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with CBP before commencing operations. Failure...

  4. 5 CFR 370.105 - Written agreements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Written agreements. 370.105 Section 370... TECHNOLOGY EXCHANGE PROGRAM § 370.105 Written agreements. Before the detail begins, the agency and private sector organization must enter into a written agreement with the individual(s) detailed. The...

  5. 19 CFR 118.3 - Written agreement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with CBP before commencing operations. Failure...

  6. 5 CFR 370.105 - Written agreements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Written agreements. 370.105 Section 370... TECHNOLOGY EXCHANGE PROGRAM § 370.105 Written agreements. Before the detail begins, the agency and private sector organization must enter into a written agreement with the individual(s) detailed. The...

  7. 19 CFR 118.3 - Written agreement.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with CBP before commencing operations. Failure...

  8. 19 CFR 118.3 - Written agreement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with CBP before commencing operations. Failure...

  9. 5 CFR 370.105 - Written agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Written agreements. 370.105 Section 370... TECHNOLOGY EXCHANGE PROGRAM § 370.105 Written agreements. Before the detail begins, the agency and private sector organization must enter into a written agreement with the individual(s) detailed. The...

  10. 5 CFR 370.105 - Written agreements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Written agreements. 370.105 Section 370... TECHNOLOGY EXCHANGE PROGRAM § 370.105 Written agreements. Before the detail begins, the agency and private sector organization must enter into a written agreement with the individual(s) detailed. The...

  11. 78 FR 75345 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-11

    ...@fmc.gov . Agreement No.; 011314-002. Title: CSAV/Trans Global Cooperative Working Agreement. Parties: Compania Sud Americana de Vapores S.A. and Trans Global Shipping NV. Filing Party: Walter H. Lion Esq.; Mc... party Swordfish Shipping Inc. to Trans Global Shipping NV and changes the agreement's termination...

  12. 48 CFR 519.7010 - Agreement contents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Agreement contents. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7010 Agreement contents. The contents of the Agreement must contain: (a) Names, addresses (including facsimile, e-mail, and...

  13. 48 CFR 519.7010 - Agreement contents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Agreement contents. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7010 Agreement contents. The contents of the Agreement must contain: (a) Names, addresses (including facsimile, e-mail, and...

  14. 48 CFR 1819.7209 - Credit agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Credit agreements. 1819... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7209 Credit agreements. (a) The credit permits the mentor to include the cost it expends on a mentor-protégé agreement...

  15. 48 CFR 1819.7209 - Credit agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Credit agreements. 1819... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7209 Credit agreements. (a) The credit permits the mentor to include the cost it expends on a mentor-protégé agreement...

  16. 49 CFR 1325.2 - Credit agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 9 2011-10-01 2011-10-01 false Credit agreements. 1325.2 Section 1325.2... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES § 1325.2 Credit agreements. (a) All agreements to extend credit...

  17. 49 CFR 1325.2 - Credit agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Credit agreements. 1325.2 Section 1325.2... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES § 1325.2 Credit agreements. (a) All agreements to extend credit...

  18. 49 CFR 1325.2 - Credit agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 9 2012-10-01 2012-10-01 false Credit agreements. 1325.2 Section 1325.2... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES § 1325.2 Credit agreements. (a) All agreements to extend credit...

  19. 49 CFR 1325.2 - Credit agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 9 2013-10-01 2013-10-01 false Credit agreements. 1325.2 Section 1325.2... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES § 1325.2 Credit agreements. (a) All agreements to extend credit...

  20. 48 CFR 1819.7209 - Credit agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Credit agreements. 1819... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7209 Credit agreements. (a) The credit permits the mentor to include the cost it expends on a mentor-protégé agreement...

  1. 48 CFR 1819.7209 - Credit agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Credit agreements. 1819... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7209 Credit agreements. (a) The credit permits the mentor to include the cost it expends on a mentor-protégé agreement...

  2. 49 CFR 1325.2 - Credit agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 9 2014-10-01 2014-10-01 false Credit agreements. 1325.2 Section 1325.2... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS EXTENSION OF CREDIT TO CANDIDATES FOR FEDERAL OFFICE OR THEIR REPRESENTATIVES § 1325.2 Credit agreements. (a) All agreements to extend credit...

  3. 48 CFR 1819.7209 - Credit agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Credit agreements. 1819... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS NASA Mentor-Protégé Program 1819.7209 Credit agreements. (a) The credit permits the mentor to include the cost it expends on a mentor-protégé agreement...

  4. 77 FR 42310 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-18

    ... . Agreement No.: 012119-001. Title: Maersk Line/CMA CGM TP5 Space Charter Agreement. Parties: A.P. Moller... Glovis Co., Ltd. Space Charter Agreement. Parties: Siem Car Carrier Pacific AS; Hyundai Glovis Co., Ltd..., Japan, Philippines, Singapore, and China), and authorizes the mutual chartering of space between...

  5. 7 CFR 247.4 - Agreements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 4 2012-01-01 2012-01-01 false Agreements. 247.4 Section 247.4 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.4 Agreements. (a) What agreements are necessary for agencies to administer...

  6. 7 CFR 247.4 - Agreements.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 4 2011-01-01 2011-01-01 false Agreements. 247.4 Section 247.4 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.4 Agreements. (a) What agreements are necessary for agencies to administer...

  7. 7 CFR 247.4 - Agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Agreements. 247.4 Section 247.4 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.4 Agreements. (a) What agreements are necessary for agencies to administer...

  8. 46 CFR Sec. 3 - Standby agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 8 2014-10-01 2014-10-01 false Standby agreements. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS FEDERAL PORT CONTROLLERS Sec. 3 Standby agreements. The Director, NSA, may negotiate the standard form of service agreement, specified...

  9. 46 CFR Sec. 3 - Standby agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 8 2013-10-01 2013-10-01 false Standby agreements. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS FEDERAL PORT CONTROLLERS Sec. 3 Standby agreements. The Director, NSA, may negotiate the standard form of service agreement, specified...

  10. 46 CFR Sec. 3 - Standby agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 8 2011-10-01 2011-10-01 false Standby agreements. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS FEDERAL PORT CONTROLLERS Sec. 3 Standby agreements. The Director, NSA, may negotiate the standard form of service agreement, specified...

  11. 76 FR 38177 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-29

    ... space in the trade from Vietnam to U.S. West Coast. Agreement No.: 012132. Title: Crowley/King Ocean Charter and Sailing Agreement. Parties: Crowley Latin America Services, LLC and King Ocean Services..., DC 20006. Synopsis: The agreement authorizes King Ocean to charter space to Crowley in the...

  12. 77 FR 28880 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-16

    ... geographic scope of the agreement. Agreement No.: 012170. Title: Crowley/SC Line Space Charter and Sailing Agreement. Parties: Crowley Latin America Services, LLC and SC Line. Filing Party: Wayne R. Rohde, Esquire... authorizes SC Line to charter space to Crowley in the trade between the U.S. Atlantic Coast and ports...

  13. 77 FR 5013 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-01

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  14. 77 FR 45610 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-01

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the...

  15. 78 FR 25443 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-01

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  16. 78 FR 23251 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-18

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  17. 76 FR 51033 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-17

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the...

  18. 76 FR 52954 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-24

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the...

  19. 77 FR 40881 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-11

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  20. 76 FR 31962 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-02

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  1. 76 FR 34992 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-15

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  2. 77 FR 50688 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-22

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the...

  3. 77 FR 54911 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-06

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  4. 78 FR 30302 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-22

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  5. 76 FR 81933 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-29

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to...

  6. 46 CFR 535.404 - Agreement provisions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Agreement provisions. 535.404 Section 535.404 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AFFECTING OCEAN SHIPPING IN FOREIGN COMMERCE OCEAN COMMON CARRIER AND MARINE TERMINAL OPERATOR AGREEMENTS SUBJECT TO THE SHIPPING ACT OF 1984 Filing of Agreements §...

  7. 48 CFR 416.702 - Basic agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Basic agreements. 416.702... CONTRACT TYPES TYPES OF CONTRACTS Agreements 416.702 Basic agreements. Promptly after execution by the Government, the HCA shall furnish to the Senior Procurement Executive a copy of each basic...

  8. 48 CFR 416.702 - Basic agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Basic agreements. 416.702... CONTRACT TYPES TYPES OF CONTRACTS Agreements 416.702 Basic agreements. Promptly after execution by the Government, the HCA shall furnish to the Senior Procurement Executive a copy of each basic...

  9. 48 CFR 416.702 - Basic agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Basic agreements. 416.702... CONTRACT TYPES TYPES OF CONTRACTS Agreements 416.702 Basic agreements. Promptly after execution by the Government, the HCA shall furnish to the Senior Procurement Executive a copy of each basic...

  10. 48 CFR 416.702 - Basic agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Basic agreements. 416.702... CONTRACT TYPES TYPES OF CONTRACTS Agreements 416.702 Basic agreements. Promptly after execution by the Government, the HCA shall furnish to the Senior Procurement Executive a copy of each basic...

  11. 48 CFR 416.702 - Basic agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Basic agreements. 416.702... CONTRACT TYPES TYPES OF CONTRACTS Agreements 416.702 Basic agreements. Promptly after execution by the Government, the HCA shall furnish to the Senior Procurement Executive a copy of each basic...

  12. 48 CFR 519.7010 - Agreement contents.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Agreement contents. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7010 Agreement contents. The contents of the Agreement must contain: (a) Names, addresses (including facsimile, e-mail, and...

  13. The Pros and Cons of Petroleum Agreements.

    ERIC Educational Resources Information Center

    Lipton, Charles J.

    1980-01-01

    A mineral agreements expert discusses the options open to tribes, from the most standard lease form to arrangements as yet untried by Indian Nations. Discussion covers 18 basic provisions for inclusion in agreements, tax considerations, and basic forms of petroleum agreements (leases, joint ventures, production sharing, and service contracts).…

  14. 5 CFR 370.105 - Written agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Written agreements. 370.105 Section 370... TECHNOLOGY EXCHANGE PROGRAM § 370.105 Written agreements. Before the detail begins, the agency and private sector organization must enter into a written agreement with the individual(s) detailed. The...

  15. 19 CFR 118.3 - Written agreement.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with Customs before commencing operations....

  16. 78 FR 35649 - Negotiated Service Agreement

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-13

    ... Commission is noticing a recent Postal Service filing concerning an amendment to the 2013 Singapore Post... inbound market dominant services with Singapore Post Limited (2013 Agreement).\\1\\ The 2013 Agreement... Foreign Postal Operators 1 Negotiated Service Agreement (with Singapore Post Limited), June 4,...

  17. 29 CFR 102.62 - Election agreements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 2 2012-07-01 2012-07-01 false Election agreements. 102.62 Section 102.62 Labor... Act § 102.62 Election agreements. (a) Consent election agreements with final regional director determinations of post-election disputes. Where a petition has been duly filed, the employer and any...

  18. 29 CFR 102.62 - Election agreements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 2 2013-07-01 2013-07-01 false Election agreements. 102.62 Section 102.62 Labor... Act § 102.62 Election agreements. (a) Consent election agreements with final regional director determinations of post-election disputes. Where a petition has been duly filed, the employer and any...

  19. 10 CFR 607.620 - Cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Cooperative agreement. 607.620 Section 607.620 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Definitions § 607.620 Cooperative agreement. Cooperative agreement means an award...

  20. 75 FR 3466 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-21

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the Secretary, Federal Maritime Commission,...

  1. 33 CFR 385.16 - Design agreements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Design agreements. 385.16 Section... Processes § 385.16 Design agreements. (a) The Corps of Engineers shall execute a design agreement with each non-Federal sponsor for the projects of the Plan prior to initiation of design activities with...

  2. 33 CFR 385.16 - Design agreements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Design agreements. 385.16 Section... Processes § 385.16 Design agreements. (a) The Corps of Engineers shall execute a design agreement with each non-Federal sponsor for the projects of the Plan prior to initiation of design activities with...

  3. 23 CFR 633.206 - Project agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Project agreements. 633.206 Section 633.206 Highways... CONTRACT PROVISIONS Federal-Aid Contracts (Appalachian Contracts) § 633.206 Project agreements. (a) Project agreements executed for projects under the Appalachian program shall contain the following paragraphs:...

  4. 23 CFR 140.606 - Project agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... projects. 1 The text of FHWA Form PR-2 is found in 23 CFR part 630, subpart C, appendix A. ... 23 Highways 1 2010-04-01 2010-04-01 false Project agreements. 140.606 Section 140.606 Highways... Reimbursement for Bond Issue Projects § 140.606 Project agreements. Project Agreements, Form PR-2, shall...

  5. 24 CFR 964.335 - Grant agreement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Grant agreement. 964.335 Section... § 964.335 Grant agreement. (a) General. HUD will enter into a grant agreement with the recipients of a Family Investment Centers grant which defines the legal framework for the relationship between HUD and...

  6. 24 CFR 964.215 - Grant agreement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Grant agreement. 964.215 Section... Grant agreement. (a) General. HUD shall enter into a grant agreement with the recipient of a technical assistance grant which defines the legal framework for the relationship between HUD and a resident council...

  7. 76 FR 76411 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-07

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to the Secretary, Federal Maritime Commission,...

  8. 78 FR 14546 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the Secretary, Federal Maritime Commission,...

  9. 76 FR 54235 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-31

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the Secretary, Federal Maritime Commission,...

  10. 49 CFR 605.14 - Agreement.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.14 Agreement. Except as provided in § 605.11 no... entered into a written agreement that the applicant will not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school...

  11. 49 CFR 605.14 - Agreement.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.14 Agreement. Except as provided in § 605.11 no... entered into a written agreement that the applicant will not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school...

  12. 7 CFR 1775.13 - Grant agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 12 2013-01-01 2013-01-01 false Grant agreement. 1775.13 Section 1775.13 Agriculture... (CONTINUED) TECHNICAL ASSISTANCE GRANTS Grant Application Processing § 1775.13 Grant agreement. Applicants selected for funding will complete a grant agreement, RUS Guide 1775-1, which outlines the terms...

  13. 7 CFR 1775.13 - Grant agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 12 2012-01-01 2012-01-01 false Grant agreement. 1775.13 Section 1775.13 Agriculture... (CONTINUED) TECHNICAL ASSISTANCE GRANTS Grant Application Processing § 1775.13 Grant agreement. Applicants selected for funding will complete a grant agreement, RUS Guide 1775-1, which outlines the terms...

  14. 24 CFR 964.215 - Grant agreement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Grant agreement. 964.215 Section... Grant agreement. (a) General. HUD shall enter into a grant agreement with the recipient of a technical assistance grant which defines the legal framework for the relationship between HUD and a resident council...

  15. 24 CFR 964.215 - Grant agreement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Grant agreement. 964.215 Section... Grant agreement. (a) General. HUD shall enter into a grant agreement with the recipient of a technical assistance grant which defines the legal framework for the relationship between HUD and a resident council...

  16. 24 CFR 964.335 - Grant agreement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Grant agreement. 964.335 Section... § 964.335 Grant agreement. (a) General. HUD will enter into a grant agreement with the recipients of a Family Investment Centers grant which defines the legal framework for the relationship between HUD and...

  17. 24 CFR 964.335 - Grant agreement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Grant agreement. 964.335 Section... § 964.335 Grant agreement. (a) General. HUD will enter into a grant agreement with the recipients of a Family Investment Centers grant which defines the legal framework for the relationship between HUD and...

  18. 7 CFR 1776.10 - Grant agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 12 2012-01-01 2012-01-01 false Grant agreement. 1776.10 Section 1776.10 Agriculture... (CONTINUED) HOUSEHOLD WATER WELL SYSTEM GRANT PROGRAM HWWS Grants § 1776.10 Grant agreement. (a) RUS and the... grant award. RUS will furnish the form of grant agreement. No funds awarded under this part shall...

  19. 7 CFR 1776.10 - Grant agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 12 2013-01-01 2013-01-01 false Grant agreement. 1776.10 Section 1776.10 Agriculture... (CONTINUED) HOUSEHOLD WATER WELL SYSTEM GRANT PROGRAM HWWS Grants § 1776.10 Grant agreement. (a) RUS and the... grant award. RUS will furnish the form of grant agreement. No funds awarded under this part shall...

  20. 7 CFR 946.101 - Marketing agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement...

  1. 7 CFR 966.111 - Marketing Agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means...

  2. 7 CFR 917.101 - Marketing agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 917.101 Section 917.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... CALIFORNIA Rules and Regulations Definitions § 917.101 Marketing agreement. Marketing agreement...

  3. 7 CFR 946.101 - Marketing agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement...

  4. 7 CFR 917.101 - Marketing agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Marketing agreement. 917.101 Section 917.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... CALIFORNIA Rules and Regulations Definitions § 917.101 Marketing agreement. Marketing agreement...

  5. 7 CFR 966.111 - Marketing Agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means...

  6. 10 CFR 611.105 - Agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Agreement. 611.105 Section 611.105 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.105 Agreement. (a) Only an Agreement executed by a duly authorized...

  7. 10 CFR 611.105 - Agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Agreement. 611.105 Section 611.105 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.105 Agreement. (a) Only an Agreement executed by a duly authorized...

  8. 10 CFR 611.105 - Agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Agreement. 611.105 Section 611.105 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.105 Agreement. (a) Only an Agreement executed by a duly authorized...

  9. 10 CFR 611.105 - Agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Agreement. 611.105 Section 611.105 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.105 Agreement. (a) Only an Agreement executed by a duly authorized...

  10. 10 CFR 611.105 - Agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Agreement. 611.105 Section 611.105 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Direct Loan Program § 611.105 Agreement. (a) Only an Agreement executed by a duly authorized...

  11. 48 CFR 519.7010 - Agreement contents.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Agreement contents. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7010 Agreement contents. The contents of the Agreement must contain: (a) Names, addresses (including facsimile, e-mail, and...

  12. 49 CFR 605.14 - Agreement.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... entered into a written agreement that the applicant will not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school bus... TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.14 Agreement. Except as provided in § 605.11...

  13. 49 CFR 605.14 - Agreement.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... entered into a written agreement that the applicant will not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school bus... TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.14 Agreement. Except as provided in § 605.11...

  14. 49 CFR 605.14 - Agreement.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... entered into a written agreement that the applicant will not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school bus... TRANSPORTATION SCHOOL BUS OPERATIONS School Bus Agreements § 605.14 Agreement. Except as provided in § 605.11...

  15. 28 CFR 83.620 - Cooperative agreement.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Cooperative agreement. 83.620 Section 83.620 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) GOVERNMENT-WIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (GRANTS) Definitions § 83.620 Cooperative agreement. Cooperative agreement means...

  16. 46 CFR Sec. 3 - Standby agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 8 2012-10-01 2012-10-01 false Standby agreements. Sec. 3 Section 3 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION B-CONTROL AND UTILIZATION OF PORTS FEDERAL PORT CONTROLLERS Sec. 3 Standby agreements. The Director, NSA, may negotiate the standard form of service agreement, specified...

  17. 77 FR 58140 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-19

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreements Filed The Commission hereby gives notice of the filing of the following agreements under the Shipping Act of 1984. Interested parties may submit comments on the agreements to the Secretary, Federal Maritime Commission,...

  18. 48 CFR 519.7010 - Agreement contents.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Agreement contents. 519... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS GSA Mentor-Protégé Program 519.7010 Agreement contents. The contents of the Agreement must contain: (a) Names, addresses (including facsimile, e-mail, and...

  19. 78 FR 54646 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-05

    .../America Cruise Ferries, Inc. Space Charter and Sailing Agreement. Parties: Crowley Latin America Services... America, Inc.; 6009 Bethlehem Road; Preston, MD 21655. Synopsis: The Amendment would add the U.S. Pacific.... Agreement No.: 012220. Title: Crowley/Seaboard Space Charter and Sailing Agreement. Parties: Crowley...

  20. 48 CFR 41.206 - Interagency agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... CATEGORIES OF CONTRACTING ACQUISITION OF UTILITY SERVICES Acquiring Utility Services 41.206 Interagency agreements. Agencies shall use interagency agreements (e.g., consolidated purchase, joint use, or cross-service agreements) when acquiring utility service or facilities from other Government agencies and...

  1. 48 CFR 41.206 - Interagency agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... CATEGORIES OF CONTRACTING ACQUISITION OF UTILITY SERVICES Acquiring Utility Services 41.206 Interagency agreements. Agencies shall use interagency agreements (e.g., consolidated purchase, joint use, or cross-service agreements) when acquiring utility service or facilities from other Government agencies and...

  2. 7 CFR 1599.5 - Agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) After FAS approves an applicant's proposal, FAS will develop an agreement in consultation with the... certain countries that will be specified in the agreement. Any violation of this provision of the... transshipment of the donated commodities to a country not specified in the agreement for as long as such...

  3. 7 CFR 1499.5 - Agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... FAS approves an applicant's proposal, FAS will develop an agreement in consultation with the applicant... certain countries that will be specified in the agreement. Any violation of this provision of the... transshipment of the donated commodities to a country not specified in the agreement for as long as such...

  4. 7 CFR 966.111 - Marketing Agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means...

  5. 7 CFR 966.111 - Marketing Agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means...

  6. 7 CFR 966.111 - Marketing Agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means...

  7. 7 CFR 946.101 - Marketing agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement...

  8. 7 CFR 946.101 - Marketing agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement...

  9. 7 CFR 946.101 - Marketing agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement...

  10. 77 FR 43599 - Notice of Agreement Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-25

    ... From the Federal Register Online via the Government Publishing Office FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the Secretary, Federal Maritime Commission,...

  11. 26 CFR 601.802 - Cooperative agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... writing by mutual agreement between the Internal Revenue Service and the program sponsor at any time... program of an eligible applicant does not warrant award of an agreement, the Internal Revenue Service may... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Cooperative agreements. 601.802 Section...

  12. 7 CFR 900.109 - Mediation agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Mediation agreement. 900.109 Section 900.109 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Mediation agreement. An agreement arrived at by mediation shall not become effective until approved by...

  13. Human parental effort and environmental risk

    PubMed Central

    Quinlan, Robert J

    2006-01-01

    Parental investment decisions depend on multiple factors, including the extent that parental care benefits offspring. Humans should show reduced parental effort in environments where parenting cannot improve offspring survival. Data from the standard cross-cultural sample are used to test this prediction. The results show that maternal care was inversely associated with famine and warfare, and also showed a quadratic association with pathogen stress, increasing as pathogen stress increased to moderate levels, but decreasing at higher levels. Age at weaning showed a similar quadratic relation with pathogens. The curvilinear associations between parental effort and pathogen stress may reflect that the saturation point of parental care is a function of environmental hazards. Paternal involvement was also inversely related to pathogen stress. The association between pathogens and paternal involvement was partially mediated by polygyny. In sum, maternal and paternal care appears to have somewhat different relations with environmental hazards, presumably owing to sex-specific tradeoffs in reproductive effort. PMID:17134996

  14. Effects of Response Effort on Resurgence.

    PubMed

    Wilson, Alyssa N; Glassford, Tyler S; Koerkenmeier, Sarah M

    2016-06-01

    The present study examined response effort during resurgence tests. Six children were trained to place balls in baskets that were placed either close (.0254 m) or far away (1.829 m or .9 m). Resurgence was assessed using a linear strip design, where responses were reinforced on a variable-interval 10-s schedule or put on extinction. During resurgence tests, minimal to low rates of resurgence associated with the greater response effort (i.e., placing a ball in the basket further way) were observed across all six participants, regardless of distance.

  15. Effects of Response Effort on Resurgence.

    PubMed

    Wilson, Alyssa N; Glassford, Tyler S; Koerkenmeier, Sarah M

    2016-06-01

    The present study examined response effort during resurgence tests. Six children were trained to place balls in baskets that were placed either close (.0254 m) or far away (1.829 m or .9 m). Resurgence was assessed using a linear strip design, where responses were reinforced on a variable-interval 10-s schedule or put on extinction. During resurgence tests, minimal to low rates of resurgence associated with the greater response effort (i.e., placing a ball in the basket further way) were observed across all six participants, regardless of distance. PMID:27606253

  16. Effort thrombosis: recognition and management while underway.

    PubMed

    Mitchell, P B; MacGillivray, D C; Almond, M D

    1991-10-01

    Effort thrombosis of the axillary and subclavian veins is an uncommon cause of upper extremity swelling. Prompt recognition and treatment of this disorder is important in order to minimize the complications of pulmonary embolism and postphlebitic syndrome that can occur with this condition. This can be very challenging while underway or in the field. A sailor who developed effort vein thrombosis while underway on board the aircraft carrier USS Abraham Lincoln is presented to review the presentation and management of this disorder, particularly as it applies to active duty military personnel.

  17. Development of ZnTe:Cu Contacts for CdTe Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-08-320

    SciTech Connect

    Dhere, R.

    2012-04-01

    The main focus of the work at NREL was on the development of Cu-doped ZnTe contacts to CdTe solar cells in the substrate configuration. The work performed under the CRADA utilized the substrate device structure used at NREL previously. All fabrication was performed at NREL. We worked on the development of Cu-doped ZnTe as well as variety of other contacts such as Sb-doped ZnTe, CuxTe, and MoSe2. We were able to optimize the contacts to improve device parameters. The improvement was obtained primarily through increasing the open-circuit voltage, to values as high as 760 mV, leading to device efficiencies of 7%.

  18. Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

    SciTech Connect

    Seong, Hee Je; Choi, Seungmok

    2015-10-09

    This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

  19. Improving Translation Models for Predicting the Energy Yield of Photovoltaic Power Systems. Cooperative Research and Development Final Report, CRADA Number CRD-13-526

    SciTech Connect

    Emery, Keith

    2015-08-04

    The project under this CRADA will analyze field data of various flat-plate and concentrator module technologies and cell measurements at the laboratory level. The field data will consist of current versus voltage data collected over many years on a latitude tilt test bed for Si, CdTe, amorphous silicon, and CIGS technologies. The concentrator data will be for mirror- and lens-based module designs using multijunction cells. The laboratory data will come from new measurements of cell performance with systematic variation of irradiance, temperature and spectral composition. These measurements will be labor-intensive and the aim will be to cover the widest possible parameter space for as many different PV samples as possible. The data analysis will require software tools to be developed. These tools will be customized for use with the specific NREL datasets and will be unsuitable for commercial release. The tools will be used to evaluate different translation equations against NREL outdoor datasets.

  20. Development of Thin Film Silicon Solar Cell Using Inkjet Printed Silicon and Other Inkjet Processes: Cooperative Research and Development Final Report, CRADA Number CRD-07-260

    SciTech Connect

    Sopori, B.

    2012-04-01

    The cost of silicon photovoltaics (Si-PV) can be greatly lowered by developing thin-film crystalline Si solar cells on glass or an equally lower cost substrate. Typically, Si film is deposited by thermal evaporation, plasma enhanced chemical vapor deposition, and sputtering. NREL and Silexos have worked under a CRADA to develop technology to make very low cost solar cells using liquid organic precursors. Typically, cyclopentasilane (CPS) is deposited on a glass substrate and then converted into an a-Si film by UV polymerization followed by low-temperature optical process that crystallizes the amorphous layer. This technique promises to be a very low cost approach for making a Si film.

  1. Bipolar plate materials in molten carbonate fuel cells. Final CRADA report.

    SciTech Connect

    Krumpelt, M. Gorelov, A. M.

    2004-06-01

    Advantages of implementation of power plants based on electrochemical reactions are successfully demonstrated in the USA and Japan. One of the msot promising types of fuel cells (FC) is a type of high temperature fuel cells. At present, thanks to the efforts of the leading countries that develop fuel cell technologies power plants on the basis of molten carbonate fuel cells (MCFC) and solid oxide fuel cells (SOFC) are really close to commercialization. One of the problems that are to be solved for practical implementation of MCFC and SOFC is a problem of corrosion of metal components of stacks that are assembled of a number of fuel cells. One of the major components of MCFC and SOFC stacks is a bipolar separator plate (BSP) that performs several functions - it is separation of reactant gas flows sealing of the joints between fuel cells, and current collection from the surface of electrodes. The goal of Task 1 of the project is to develop new cost-effective nickel coatings for the Russian 20X23H18 steel for an MCFC bipolar separator plate using technological processes usually implemented to apply corrosion stable coatings onto the metal parts for products in the defense. There was planned the research on production of nickel coatings using different methods, first of all the galvanic one and the explosion cladding one. As a result of the works, 0.4 x 712 x 1296 mm plates coated with nickel on one side were to be made and passed to ANL. A line of 4 galvanic baths 600 liters was to be built for the galvanic coating applications. The goal of Task 2 of the project is the development of a new material of an MCFC bipolar separator plate with an upgraded corrosion stability, and development of a technology to produce cold roll sheets of this material the sizes of which will be 0.8 x 712x 1296 mm. As a result of these works, a pilot batch of the rolled material in sheets 0.8 x 712 x 1296 mm in size is to be made (in accordance with the norms and standards of the Russian

  2. Mapping Fishing Effort through AIS Data.

    PubMed

    Natale, Fabrizio; Gibin, Maurizio; Alessandrini, Alfredo; Vespe, Michele; Paulrud, Anton

    2015-01-01

    Several research initiatives have been undertaken to map fishing effort at high spatial resolution using the Vessel Monitoring System (VMS). An alternative to the VMS is represented by the Automatic Identification System (AIS), which in the EU became compulsory in May 2014 for all fishing vessels of length above 15 meters. The aim of this paper is to assess the uptake of the AIS in the EU fishing fleet and the feasibility of producing a map of fishing effort with high spatial and temporal resolution at European scale. After analysing a large AIS dataset for the period January-August 2014 and covering most of the EU waters, we show that AIS was adopted by around 75% of EU fishing vessels above 15 meters of length. Using the Swedish fleet as a case study, we developed a method to identify fishing activity based on the analysis of individual vessels' speed profiles and produce a high resolution map of fishing effort based on AIS data. The method was validated using detailed logbook data and proved to be sufficiently accurate and computationally efficient to identify fishing grounds and effort in the case of trawlers, which represent the largest portion of the EU fishing fleet above 15 meters of length. Issues still to be addressed before extending the exercise to the entire EU fleet are the assessment of coverage levels of the AIS data for all EU waters and the identification of fishing activity in the case of vessels other than trawlers. PMID:26098430

  3. School Trips: Are They Worth the Effort?

    ERIC Educational Resources Information Center

    Johnston, Robert

    2015-01-01

    Even the most basic of school trips will require booking places, arranging transport, writing to parents, collecting payments, planning activities, producing worksheets and, of course, endless risk assessments. It always leaves teachers wondering: "is it really worth all this effort?" Robert Johnston believes that every teacher should…

  4. Student Effort, Consistency, and Online Performance

    ERIC Educational Resources Information Center

    Patron, Hilde; Lopez, Salvador

    2011-01-01

    This paper examines how student effort, consistency, motivation, and marginal learning, influence student grades in an online course. We use data from eleven Microeconomics courses taught online for a total of 212 students. Our findings show that consistency, or less time variation, is a statistically significant explanatory variable, whereas…

  5. Behavior Contracts: A Home School Cooperative Effort.

    ERIC Educational Resources Information Center

    Stitely, Rose Patton

    1978-01-01

    This paper focuses on behavior contracts at school which attempt to promote a home school cooperative effort. The contract is drawn up at school, and classroom teachers award points for appropriate school behaviors; parents in turn reward the student if the report is good. (DS)

  6. The Effect of Effort Grading on Learning

    ERIC Educational Resources Information Center

    Swinton, Omari H.

    2010-01-01

    In the fall of 2004, Benedict College--a Historically Black College in Columbia, SC--began enforcing a new grading policy called Success Equals Effort (SE[squared]). Under this policy, students taking freshman and sophomore level courses were assigned grades that explicitly rewarded not only content learning ("knowledge" grade) but also measures…

  7. The Galileo Teacher Training Program Global Efforts

    NASA Astrophysics Data System (ADS)

    Doran, R.; Pennypacker, C.; Ferlet, R.

    2012-08-01

    The Galileo Teacher Training Program (GTTP) successfully named representatives in nearly 100 nations in 2009, the International Year of Astronomy (IYA2009). The challenge had just begun. The steps ahead are how to reach educators that might benefit from our program and how to help build a more fair and science literate society, a society in which good tools and resources for science education are not the privilege of a few. From 2010 on our efforts have been to strengthen the newly formed network and learn how to equally help educators and students around the globe. New partnerships with other strong programs and institutions are being formed, sponsorship schemes being outlined, new tools and resources being publicized, and on-site and video conference training conducted all over the world. Efforts to officially accredit a GTTP curriculum are on the march and a stronger certification process being outlined. New science topics are being integrated in our effort and we now seek to discuss the path ahead with experts in this field and the community of users, opening the network to all corners of our beautiful blue dot. The main aim of this article is to open the discussion regarding the urgent issue of how to reawaken student interest in science, how to solve the gender inequality in science careers, and how to reach the underprivileged students and open to them the same possibilities. Efforts are in strengthening the newly formed network and learning how to equally help educators and students around the globe.

  8. Mapping Fishing Effort through AIS Data

    PubMed Central

    Natale, Fabrizio; Gibin, Maurizio; Alessandrini, Alfredo; Vespe, Michele; Paulrud, Anton

    2015-01-01

    Several research initiatives have been undertaken to map fishing effort at high spatial resolution using the Vessel Monitoring System (VMS). An alternative to the VMS is represented by the Automatic Identification System (AIS), which in the EU became compulsory in May 2014 for all fishing vessels of length above 15 meters. The aim of this paper is to assess the uptake of the AIS in the EU fishing fleet and the feasibility of producing a map of fishing effort with high spatial and temporal resolution at European scale. After analysing a large AIS dataset for the period January-August 2014 and covering most of the EU waters, we show that AIS was adopted by around 75% of EU fishing vessels above 15 meters of length. Using the Swedish fleet as a case study, we developed a method to identify fishing activity based on the analysis of individual vessels’ speed profiles and produce a high resolution map of fishing effort based on AIS data. The method was validated using detailed logbook data and proved to be sufficiently accurate and computationally efficient to identify fishing grounds and effort in the case of trawlers, which represent the largest portion of the EU fishing fleet above 15 meters of length. Issues still to be addressed before extending the exercise to the entire EU fleet are the assessment of coverage levels of the AIS data for all EU waters and the identification of fishing activity in the case of vessels other than trawlers. PMID:26098430

  9. Effort, success, and nonuse determine arm choice.

    PubMed

    Schweighofer, Nicolas; Xiao, Yupeng; Kim, Sujin; Yoshioka, Toshinori; Gordon, James; Osu, Rieko

    2015-07-01

    How do humans choose one arm or the other to reach single targets in front of the body? Current theories of reward-driven decisionmaking predict that choice results from a comparison of "action values," which are the expected rewards for possible actions in a given state. In addition, current theories of motor control predict that in planning arm movements, humans minimize an expected motor cost that balances motor effort and endpoint accuracy. Here, we test the hypotheses that arm choice is determined by comparison of action values comprising expected effort and expected task success for each arm, as well as a handedness bias. Right-handed subjects, in either a large or small target condition, were first instructed to use each hand in turn to shoot through an array of targets and then to choose either hand to shoot through the same targets. Effort was estimated via inverse kinematics and dynamics. A mixed-effects logistic-regression analysis showed that, as predicted, both expected effort and expected success predicted choice, as did arm use in the preceding trial. Finally, individual parameter estimation showed that the handedness bias correlated with mean difference between right- and left-arm success, leading to overall lower use of the left arm. We discuss our results in light of arm nonuse in individuals' poststroke. PMID:25948869

  10. Has Malaysia's antidrug effort been effective?

    PubMed

    Scorzelli, J F

    1992-01-01

    It is a common belief that a massive effort in law enforcement, preventive education and rehabilitation will result in the elimination of a country's drug problem. Based on this premise. Malaysia in 1983 implemented such a multifaceted anti-drug strategy, and the results of a 1987 study by the author suggested that Malaysia's effort had begun to contribute to a steady decrease in the number of identified drug abusers. Although the number of drug-addicted individuals declined, the country's recidivism rates were still high. Because of this high relapse rate, Malaysia expanded their rehabilitation effort and developed a community transition program. In order to determine the impact of these changes on the country's battle against drug abuse, a follow-up study was conducted in 1990. The results of this study did not clearly demonstrate that the Malaysian effort had been successful in eliminating the problem of drug abuse, and raised some questions concerning the effectiveness of the country's drug treatment programs.

  11. Economic Woes May Hurt Colleges' Green Efforts

    ERIC Educational Resources Information Center

    Carlson, Scott

    2008-01-01

    Recent events on Wall Street raise a complicated question: Will the financial crisis help or hurt colleges' sustainability efforts? Both are possible. In this article, the author discusses how the Wall Street meltdown may hurt colleges' green initiatives. However, advocates of sustainability see an opportunity to change the conversation. A…

  12. "Reasonable efforts": toward implementation in permanency planning.

    PubMed

    Seaberg, J R

    1986-01-01

    The "reasonable efforts" criterion for provision of services to the families of children in foster care and to the families of children at risk of entering foster care is designed to provide for external, and presumably more objective, monitoring by a court of the quantity and quality of these services. A standard of "reasonable effort" applicable to all cases in the two populations of concern is both impractical and probably unethical. Legally there must be a case-by-case determination of "reasonable efforts" that will weigh the unique elements of each case. It is hoped that the working guideline proposed here will provide a basis in child welfare practice for minimizing potentially great variations in court decisions. The guideline begins with a list of problems, verified via an adversarial review, as to why the child(ren) entered foster care or is at risk of doing so, followed by the establishment of the relevance of proffered services to those problems, followed by documentation of a sustained effort to facilitate the use of those services.

  13. Restructuring Schooling: Learning from Ongoing Efforts.

    ERIC Educational Resources Information Center

    Murphy, Joseph, Ed.; Hallinger, Philip, Ed.

    Popular demands for school restructuring are increasingly common. This book is designed for diverse audiences who are interested in school improvement. Chapter 1, "Restructuring: In Search of a Movement" (Joseph Murphy), provides a historical and conceptual framework of restructuring efforts. Chapter 2, "Feeling the Ripples, Riding…

  14. Empowering Students: Variables Impacting the Effort.

    ERIC Educational Resources Information Center

    Short, Paula M.; Greer, John T.

    This paper describes a national 3-year project, the Empowered School District Project, which was implemented in nine school districts to empower school participants. This paper focuses on the efforts to empower students by helping them become independent, lifelong learners. The project was implemented in nine schools--five elementary and four high…

  15. Instruction Emphasizing Effort Improves Physics Problem Solving

    ERIC Educational Resources Information Center

    Li, Daoquan

    2012-01-01

    Effectively using strategies to solve complex problems is an important educational goal and is implicated in successful academic performance. However, people often do not spontaneously use the effective strategies unless they are motivated to do so. The present study was designed to test whether educating students about the importance of effort in…

  16. Making life easier with effort: Basic findings and applied research on response effort.

    PubMed

    Friman, P C

    1995-01-01

    Early basic research showed that increases in required response effort (or force) produced effects that resembled those produced by punishment. A recent study by Alling and Poling determined some subtle differences between the two behavior-change strategies, but also confirmed that increasing required effort is an effective response-reduction procedure with enduring effects. In this paper we summarize basic research on response effort and explore the role of effort in diverse applied areas including deceleration of aberrant behavior, attention deficit hyperactivity disorder, oral habits, health care appointment keeping, littering, indexes of functional disability, and problem solving. We conclude that renewed interest in response effort as an independent variable is justified because of its potent effects and because the political constraints imposed on punishment- and reinforcement-based procedures have yet to be imposed on procedures that entail manipulations of response effort.

  17. Making life easier with effort: Basic findings and applied research on response effort

    PubMed Central

    Friman, Patrick C.; Poling, Alan

    1995-01-01

    Early basic research showed that increases in required response effort (or force) produced effects that resembled those produced by punishment. A recent study by Alling and Poling determined some subtle differences between the two behavior-change strategies, but also confirmed that increasing required effort is an effective response-reduction procedure with enduring effects. In this paper we summarize basic research on response effort and explore the role of effort in diverse applied areas including deceleration of aberrant behavior, attention deficit hyperactivity disorder, oral habits, health care appointment keeping, littering, indexes of functional disability, and problem solving. We conclude that renewed interest in response effort as an independent variable is justified because of its potent effects and because the political constraints imposed on punishment- and reinforcement-based procedures have yet to be imposed on procedures that entail manipulations of response effort. PMID:16795886

  18. Rocky Flats Cleanup Agreement implementation successes and challenges

    SciTech Connect

    Shelton, D.C.

    1997-02-01

    On July 19, 1996 the US Department of Energy (DOE), State of Colorado (CDPHE), and US Environmental Protection Agency (EPA) entered into an agreement called the Rocky Flats Cleanup Agreement (RFCA) for the cleanup and closure of the Rocky Flats Environmental Technology Site (RFETS or Rocky Flats). Major elements of the agreement include: an Integrated Site-Wide Baseline; up to twelve significant enforceable milestones per year; agreed upon soil and water action levels and standards for cleanup; open space as the likely foreseeable land use; the plutonium and TRU waste removed by 2015; streamlined regulatory process; agreement with the Defense Nuclear Facilities Safety Board (DNFSB) to coordinate activities; and a risk reduction focus. Successful implementation of RFCA requires a substantial effort by the parties to change their way of thinking about RFETS and meet the deliverables and commitments. Substantial progress toward Site closure through the implementation of RFCA has been accomplished in the short time since the signing, yet much remains to be done. Much can be learned from the Rocky Flats experience by other facilities in similar situations.

  19. Disrupting the supplementary motor area makes physical effort appear less effortful.

    PubMed

    Zénon, Alexandre; Sidibé, Mariam; Olivier, Etienne

    2015-06-10

    The perception of physical effort is relatively unaffected by the suppression of sensory afferences, indicating that this function relies mostly on the processing of the central motor command. Neural signals in the supplementary motor area (SMA) correlate with the intensity of effort, suggesting that the motor signal involved in effort perception could originate from this area, but experimental evidence supporting this view is still lacking. Here, we tested this hypothesis by disrupting neural activity in SMA, in primary motor cortex (M1), or in a control site by means of continuous theta-burst transcranial magnetic stimulation, while measuring effort perception during grip forces of different intensities. After each grip force exertion, participants had the opportunity to either accept or refuse to replicate the same effort for varying amounts of reward. In addition to the subjective rating of perceived exertion, effort perception was estimated on the basis of the acceptance rate, the effort replication accuracy, the influence of the effort exerted in trial t on trial t+1, and pupil dilation. We found that disruption of SMA activity, but not of M1, led to a consistent decrease in effort perception, whatever the measure used to assess it. Accordingly, we modeled effort perception in a structural equation model and found that only SMA disruption led to a significant alteration of effort perception. These findings indicate that effort perception relies on the processing of a signal originating from motor-related neural circuits upstream of M1 and that SMA is a key node of this network. PMID:26063908

  20. Breckinridge Project, initial effort. Report II. Breckinridge Project design basis

    SciTech Connect

    1982-01-01

    The Breckinridge Project is a pioneer endeavor involving the engineering, construction, and operation of a commercial facility that will convert 23,000 tons per day of run-of-mine, high-sulfur coal into 50,000 barrels per day of liquid hydrocarbons equivalent to those produced from crude oil. The Initial Effort, now complete, was executed under Cooperative Agreement No. DE-FC05-80OR20717 between the Department of Energy and the Participants, Ashland Synthetic Fuels, Inc., and Airco Energy Company, Inc. The Initial Effort produced a preliminary design, capital estimate, and economic analysis of the commercial plant, as well as a plan for the design, construction, and operation of that plant. The extensive and rigorous attention given to environmental, socioeconomic, safety, and health considerations is indicative of the high priority these issues will continue to receive throughout the life of the project. The Breckinridge Energy Company, a partnership of several major corporations, is being formed to finance, own, and manage the Breckinridge Project. Report II is intended for the reader who is primarily interested in less detailed discussion of the coal liquefaction process and Breckinridge facility than presented in the eleven volumes of Reports IV and V. The overview section describes the project goals and briefly introduces the coal liquefaction process. The report continues with a discussion of the history of the project and the H-COAL process from its concept to the proposed commercialization technology. The report describes the site, the Breckinridge Facility, and concludes with a summary of the eleven reports that contain the deliverable documentation of the Initial Effort or Development Phase of the project.

  1. 46 CFR 298.38 - Partnership agreements and limited liability company agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Partnership agreements and limited liability company... FINANCING ASSISTANCE OBLIGATION GUARANTEES Documentation § 298.38 Partnership agreements and limited liability company agreements. Partnership and limited liability company agreements must be in form...

  2. 22 CFR 124.6 - Termination of manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Termination of manufacturing license agreements... Termination of manufacturing license agreements and technical assistance agreements. The U.S. party to a manufacturing license or a technical assistance agreement must inform the Directorate of Defense Trade...

  3. 22 CFR 124.6 - Termination of manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Termination of manufacturing license agreements... Termination of manufacturing license agreements and technical assistance agreements. The U.S. party to a manufacturing license or a technical assistance agreement must inform the Directorate of Defense Trade...

  4. 22 CFR 124.6 - Termination of manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Termination of manufacturing license agreements... Termination of manufacturing license agreements and technical assistance agreements. The U.S. party to a manufacturing license or a technical assistance agreement must inform the Directorate of Defense Trade...

  5. 22 CFR 124.6 - Termination of manufacturing license agreements and technical assistance agreements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Termination of manufacturing license agreements... Termination of manufacturing license agreements and technical assistance agreements. The U.S. party to a manufacturing license or a technical assistance agreement must inform the Directorate of Defense Trade...

  6. An agreement coefficient for image comparison

    USGS Publications Warehouse

    Ji, L.; Gallo, K.

    2006-01-01

    Combination of datasets acquired from different sensor systems is necessary to construct a long time-series dataset for remotely sensed land-surface variables. Assessment of the agreement of the data derived from various sources is an important issue in understanding the data continuity through the time-series. Some traditional measures, including correlation coefficient, coefficient of determination, mean absolute error, and root mean square error, are not always optimal for evaluating the data agreement. For this reason, we developed a new agreement coefficient for comparing two different images. The agreement coefficient has the following properties: non-dimensional, bounded, symmetric, and distinguishable between systematic and unsystematic differences. The paper provides examples of agreement analyses for hypothetical data and actual remotely sensed data. The results demonstrate that the agreement coefficient does include the above properties, and therefore is a useful tool for image comparison. ?? 2006 American Society for Photogrammetry and Remote Sensing.

  7. Does software design complexity affect maintenance effort?

    NASA Technical Reports Server (NTRS)

    Epping, Andreas; Lott, Christopher M.

    1994-01-01

    The design complexity of a software system may be characterized within a refinement level (e.g., data flow among modules), or between refinement levels (e.g., traceability between the specification and the design). We analyzed an existing set of data from NASA's Software Engineering Laboratory to test whether changing software modules with high design complexity requires more personnel effort than changing modules with low design complexity. By analyzing variables singly, we identified strong correlations between software design complexity and change effort for error corrections performed during the maintenance phase. By analyzing variables in combination, we found patterns which identify modules in which error corrections were costly to perform during the acceptance test phase.

  8. Final Report on the NCAR VTMX Effort

    SciTech Connect

    Parsons, David; Pinto, James; Brown, William; Cohen, Stephen; Morley, Bruce

    2007-02-13

    The NCAR effort is primarily focused on the analysis of a diverse suite of measurements taken at the southern end of the Salt Lake City Valley within the Jordan Narrows. These measurements include wind profiler, surface, lidar, radiosonde, multi-layered tether-sonde and sodar measurements. We are also collaborating with other VTMX investigators through linking our measurements within the Jordan Narrows with their investigations. The instrumentation was provided to interested VTMX investigators and was used extensively. Thus the NCAR data set played a large role in the results of the overall experiment. Our work under this proposal includes analysis of the observations, mesoscale modeling efforts in support of our VTMX analysis and general instrumentation development aimed at improving the measurement of vertical transport and mixing under stable conditions. This report is subdivided by research objectives.

  9. The fallacies of concurrent climate policy efforts.

    PubMed

    Radetzki, Marian

    2010-05-01

    Climate policy has assumed an extreme degree of urgency in the international debate in recent years. This article begins by taking a critical look at the scientific underpinnings of the efforts to stabilize the climate. It points to several serious question marks on the purported relationship between greenhouse gas emissions and global warming, and expresses distrust about claims of impending catastrophes related to rising sea levels, hurricanes, and spread of infectious disease. It then reviews the concurrent climate policy efforts and concludes that they are incoherent, misguided and unduly costly, and that they have so far had no perceptible impact on anthropogenic greenhouse gas emissions. The exceedingly ambitious policy plans currently under preparation suffer from similar fallacies. For these reasons, but also because of the remaining scientific doubts and the exorbitant costs that have to be incurred, skepticism is expressed about the preparedness to implement the climate policy plans currently on the table.

  10. Making Life Easier with Effort: Basic Findings and Applied Research on Response Effort.

    ERIC Educational Resources Information Center

    Friman, Patrick C.; Poling, Alan

    1995-01-01

    This paper summarizes basic research on response effort in diverse applied areas including deceleration of aberrant behavior, attention deficit-hyperactivity disorder, oral habits, littering, and problem solving. The paper concludes that response effort as an independent variable has potent effects, and research exploring the applied benefits of…

  11. Qualitative Evaluation of Health Information Exchange Efforts

    PubMed Central

    Ash, Joan S.; Guappone, Kenneth P.

    2007-01-01

    Because most health information exchange (HIE) initiatives are as yet immature, formative evaluation is recommended so that what is learned through evaluation can be immediately applied to assist in HIE development efforts. Qualitative methods can be especially useful for formative evaluation because they can guide ongoing HIE growth while taking context into consideration. This paper describes important HIE-related research questions and outlines appropriate qualitative research techniques for addressing them. PMID:17904914

  12. NRC; Smog control efforts off mark

    SciTech Connect

    Not Available

    1992-01-06

    This paper reports that the National Research Council says the U.S. regulatory programs to control smog may have been misdirected the past 20 years, and more emphasis needs to be placed on limiting nitrogen oxide emissions. An NRC study the ozone control efforts have focused mainly on controlling volatile organic compounds (VOC) emissions. However, in many parts of the country controlling emissions of nitrogen oxides would be more effective, it the, noting VOCs and nitrogen oxides are precursors of ozone.

  13. Quality Improvement Efforts in Pediatric Oral Health.

    PubMed

    Ng, Man Wai

    2016-04-01

    Quality improvement (QI) and measurement are increasingly used in health care to improve patient care and outcomes. Despite current barriers in oral health measurement, there are nascent QI and measurement efforts emerging. This paper describes the role that QI and measurement can play in improving oral health care delivery in clinical practice by presenting a QI initiative that aimed to test and implement a chronic disease management approach to address early childhood caries. PMID:27265978

  14. Joint SatOPS Compatibility Efforts

    NASA Technical Reports Server (NTRS)

    Smith, Danford

    2010-01-01

    This slide presentation reviews NASA Goddard Space Flight Center's (GSFC) participation in the interagency cooperation committee, the Joint SatOps Compatibility Committee (JSCC), and the compatible Sat 2 efforts. Part of GSFC's participation in the JSCC is to work with the Goddard Mission Systems Evolution Center (GMSEC) to provides a publish/subscribe framework to enable rapid integration of commercially available satellite control products.

  15. How do feelings influence effort? An empirical study of entrepreneurs' affect and venture effort.

    PubMed

    Foo, Maw-Der; Uy, Marilyn A; Baron, Robert A

    2009-07-01

    How do feelings influence the effort of entrepreneurs? To obtain data on this issue, the authors implemented experience sampling methodology in which 46 entrepreneurs used cell phones to provide reports on their affect, future temporal focus, and venture effort twice daily for 24 days. Drawing on the affect-as-information theory, the study found that entrepreneurs' negative affect directly predicts entrepreneurs' effort toward tasks that are required immediately. Results were consistent for within-day and next-day time lags. Extending the theory, the study found that positive affect predicts venture effort beyond what is immediately required and that this relationship is mediated by future temporal focus. The mediating effects were significant only for next-day outcomes. Implications of findings on the nature of the affect-effort relationship for different time lags are discussed. PMID:19594247

  16. Mere effort and stereotype threat performance effects.

    PubMed

    Jamieson, Jeremy P; Harkins, Stephen G

    2007-10-01

    Although the fact that stereotype threat impacts performance is well established, the underlying process(es) is(are) not clear. Recently, T. Schmader and M. Johns (2003) argued for a working memory interference account, which proposes that performance suffers because cognitive resources are expended on processing information associated with negative stereotypes. The antisaccade task provides a vehicle to test this account because optimal performance requires working memory resources to inhibit the tendency to look at an irrelevant, peripheral cue (the prepotent response) and to generate volitional saccades to the target. If stereotype threat occupies working memory resources, then the ability to inhibit the prepotent response and to launch volitional saccades will be impaired, and performance will suffer. In contrast, S. Harkins's (2006) mere effort account argues that stereotype threat participants are motivated to perform well, which potentiates the prepotent response, but also leads to efforts to counter this tendency if participants recognize that the response is incorrect, know the correct response, and have the opportunity to make it. Results from 4 experiments support the mere effort but not the working memory interference account.

  17. Inequity responses of monkeys modified by effort

    PubMed Central

    van Wolkenten, Megan; Brosnan, Sarah F.; de Waal, Frans B. M.

    2007-01-01

    Without joint benefits, joint actions could never have evolved. Cooperative animals need to monitor closely how large a share they receive relative to their investment toward collective goals. This work documents the sensitivity to reward division in brown, or tufted, capuchin monkeys (Cebus apella). In addition to confirming previous results with a larger subject pool, this work rules out several alternative explanations and adds data on effort sensitivity. Thirteen adult monkeys exchanged tokens for rewards, showing negative reactions to receiving a less-favored reward than their partner. Because their negative reaction could not be attributed to the mere visibility of better rewards (greed hypothesis) nor to having received such rewards in the immediate past (frustration hypothesis), it must have been caused by seeing their partner obtain the better reward. Effort had a major effect in that by far the lowest level of performance in the entire study occurred in subjects required to expend a large effort while at the same time seeing their partner receive a better reward. It is unclear whether this effort–effect was based on comparisons with the partner, but it added significantly to the intensity of the inequity response. These effects are as expected if the inequity response evolved in the context of cooperative survival strategies. PMID:18000045

  18. 7 CFR 3431.18 - Service agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE VETERINARY MEDICINE LOAN REPAYMENT PROGRAM Administration of the Veterinary Medicine Loan Repayment Program § 3431.18 Service agreement. (a) The...

  19. 7 CFR 1720.9 - Guarantee Agreement.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... the guarantee; (6) Limitation on acceleration of guaranteed bonds; (7) Calculation and manner of..., indemnification, multiple bond issues; (19) Governing law; (20) Notices; (21) Benefit of agreement; (22)...

  20. 7 CFR 1720.9 - Guarantee Agreement.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... the guarantee; (6) Limitation on acceleration of guaranteed bonds; (7) Calculation and manner of..., indemnification, multiple bond issues; (19) Governing law; (20) Notices; (21) Benefit of agreement; (22)...

  1. 7 CFR 1720.9 - Guarantee Agreement.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... the guarantee; (6) Limitation on acceleration of guaranteed bonds; (7) Calculation and manner of..., indemnification, multiple bond issues; (19) Governing law; (20) Notices; (21) Benefit of agreement; (22)...

  2. 7 CFR 1720.9 - Guarantee Agreement.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the guarantee; (6) Limitation on acceleration of guaranteed bonds; (7) Calculation and manner of..., indemnification, multiple bond issues; (19) Governing law; (20) Notices; (21) Benefit of agreement; (22)...

  3. 7 CFR 1720.9 - Guarantee Agreement.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the guarantee; (6) Limitation on acceleration of guaranteed bonds; (7) Calculation and manner of..., indemnification, multiple bond issues; (19) Governing law; (20) Notices; (21) Benefit of agreement; (22)...

  4. 76 FR 64944 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-19

    ...: Hamburg-Sud (``HSDG''); Alianca Navegacao e Logistica Ltda. e CIA (``Alianca''); Compania Sud Americana de...-010. Title: Maritime Credit Agreement. Parties: Alianca Navegacao e Logistica Ltda. & Cia.;...

  5. 48 CFR 49.109 - Settlement agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Settlement agreements. 49.109 Section 49.109 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT TERMINATION OF CONTRACTS General Principles 49.109 Settlement agreements....

  6. 77 FR 33459 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-06

    .... Title: Hoegh/Liberty Middle East Space Charter Agreement. Parties: Hoegh Autoliners AS and Liberty....S. East Coast Slot Charter Agreement. Parties: Hyundai Merchant Marine Co., Ltd., Mistsui O.S.K... to/from one another on an ``as needed, as available'' basis in the trade from ports on the U.S....

  7. 14 CFR 141.26 - Training agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training agreements. 141.26 Section 141.26... OTHER CERTIFICATED AGENCIES PILOT SCHOOLS General § 141.26 Training agreements. A training center certificated under part 142 of this chapter may provide the training, testing, and checking for pilot...

  8. 14 CFR 142.33 - Training agreements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training agreements. 142.33 Section 142.33... OTHER CERTIFICATED AGENCIES TRAINING CENTERS General § 142.33 Training agreements. A pilot school certificated under part 141 of this chapter may provide training, testing, and checking for a training...

  9. 23 CFR 710.307 - Project agreement.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... acquisitions, including hardship acquisition and protective buying (see 23 CFR 710.503). The STD must prepare a project agreement in accordance with 23 CFR part 630, subpart C. The agreement shall be based on an..., donations, or other contributions applied to the project provided conditions in 23 U.S.C. 323 and 23 CFR...

  10. 23 CFR 710.307 - Project agreement.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... acquisitions, including hardship acquisition and protective buying (see 23 CFR 710.503). The STD must prepare a project agreement in accordance with 23 CFR part 630, subpart C. The agreement shall be based on an..., donations, or other contributions applied to the project provided conditions in 23 U.S.C. 323 and 23 CFR...

  11. 23 CFR 710.307 - Project agreement.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... acquisitions, including hardship acquisition and protective buying (see 23 CFR 710.503). The STD must prepare a project agreement in accordance with 23 CFR part 630, subpart C. The agreement shall be based on an..., donations, or other contributions applied to the project provided conditions in 23 U.S.C. 323 and 23 CFR...

  12. 23 CFR 710.307 - Project agreement.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... acquisitions, including hardship acquisition and protective buying (see 23 CFR 710.503). The STD must prepare a project agreement in accordance with 23 CFR part 630, subpart C. The agreement shall be based on an..., donations, or other contributions applied to the project provided conditions in 23 U.S.C. 323 and 23 CFR...

  13. 32 CFR 241.5 - Written agreements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 2 2011-07-01 2011-07-01 false Written agreements. 241.5 Section 241.5 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL § 241.5 Written agreements....

  14. 32 CFR 241.5 - Written agreements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 2 2012-07-01 2012-07-01 false Written agreements. 241.5 Section 241.5 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS... Written agreements. (a) Before an assignment begins, the head of the DoD Component, private...

  15. 32 CFR 241.5 - Written agreements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 2 2013-07-01 2013-07-01 false Written agreements. 241.5 Section 241.5 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL § 241.5 Written agreements....

  16. 32 CFR 241.5 - Written agreements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 2 2014-07-01 2014-07-01 false Written agreements. 241.5 Section 241.5 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS PILOT PROGRAM FOR TEMPORARY EXCHANGE OF INFORMATION TECHNOLOGY PERSONNEL § 241.5 Written agreements....

  17. 48 CFR 1819.7206 - Agreement contents.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Agreement contents. 1819.7206 Section 1819.7206 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE... contents. Each mentor-protégé agreement will contain the following elements: (a) The name, address,...

  18. 48 CFR 1819.7206 - Agreement contents.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Agreement contents. 1819.7206 Section 1819.7206 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND SPACE... contents. Each mentor-protégé agreement will contain the following elements: (a) The name, address,...

  19. 77 FR 32115 - Notice of Agreements Filed

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-31

    .... Title: CMA CGM/SSL Puerto Rico-Leeward Islands Space Charter Agreement. Parties: CMA CGM S.A. and Sea Star Line LLC. Filing Party: Wayne R. Rohde, Esquire; Cozen O'Connor; 1627 I Street NW., Suite 1100; Washington, DC 20006-4007. Synopsis: The agreement authorizes CMA to charter space to Sea Star in the...

  20. 39 CFR 963.12 - Settlement agreements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 39 Postal Service 1 2012-07-01 2012-07-01 false Settlement agreements. 963.12 Section 963.12 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO... rules do not preclude the disposition of any matter by agreement between the parties at any stage of...