Science.gov

Sample records for agricultural test plots

  1. Steroid hormone runoff from agricultural test plots applied with municipal biosolids

    USGS Publications Warehouse

    Yang, Yun-Ya; Gray, James L.; Furlong, Edward T.; Davis, Jessica G.; ReVollo, Rhiannon C.; Borch, Thomas

    2012-01-01

    The potential presence of steroid hormones in runoff from sites where biosolids have been used as agricultural fertilizers is an environmental concern. A study was conducted to assess the potential for runoff of seventeen different hormones and two sterols, including androgens, estrogens, and progestogens from agricultural test plots. The field containing the test plots had been applied with biosolids for the first time immediately prior to this study. Target compounds were isolated by solid-phase extraction (water samples) and pressurized solvent extraction (solid samples), derivatized, and analyzed by gas chromatography–tandem mass spectrometry. Runoff samples collected prior to biosolids application had low concentrations of two hormones (estrone -1 and androstenedione -1) and cholesterol (22.5 ± 3.8 μg L-1). In contrast, significantly higher concentrations of multiple estrogens (-1), androgens (-1), and progesterone (-1) were observed in runoff samples taken 1, 8, and 35 days after biosolids application. A significant positive correlation was observed between antecedent rainfall amount and hormone mass loads (runoff). Hormones in runoff were primarily present in the dissolved phase (<0.7-μm GF filter), and, to a lesser extent bound to the suspended-particle phase. Overall, these results indicate that rainfall can mobilize hormones from biosolids-amended agricultural fields, directly to surface waters or redistributed to terrestrial sites away from the point of application via runoff. Although concentrations decrease over time, 35 days is insufficient for complete degradation of hormones in soil at this site.

  2. Slope Stability of Geosynthetic Clay Liner Test Plots

    EPA Science Inventory

    Fourteen full-scale field test plots containing five types of geosynthetic clay liners (GCLs) were constructed on 2H:IV and 3H:IV slopes for the purpose of assessing slope stability. The test plots were designed to simulate typical final cover systems for landfill. Slides occurr...

  3. Evolution of overland flow connectivity in bare agricultural plots

    NASA Astrophysics Data System (ADS)

    Peñuela, Andrés; Darboux, Frédéric; Javaux, Mathieu; Bielders, Charles L.

    2016-04-01

    Soil surface roughness not only delays overland flow generation but also strongly affects overland flow distribution and concentration. Previous studies generally aimed at predicting the delay in overland flow generation by means of a single parameter characterizing soil roughness. However, little work has been done to find a link between soil roughness and overland flow dynamics. This is made difficult because soil roughness and hence overland flow characteristics evolve differently depending on whether diffuse or concentrated erosion dominates. The present study examines whether the concept of connectivity can be used to link roughness characteristics to overland flow dynamics. For this purpose, soil roughness of three 30-m² tilled plots exposed to natural rainfall was monitored during 2 years. Soil micro-topography was characterized by means of photogrammetry on a monthly basis. Soil roughness was characterized by the variogram, and overland flow connectivity by a functional connectivity indicator called the Relative Surface Connection function (RSCf). Overland flow hydrograms were generated by a physically-based overland flow model (FullSWOF_2D) on 1-cm resolution digital elevation models. The development of eroded flow paths at the soil surface not only reduced the delay in overland flow generation but also resulted in a higher continuity of high flow velocity paths, an increase in erosive energy and a higher rate of increase of the overland flow hydrograph. Overland flow dynamics were found to be highly correlated to the RSCf characteristic points. This high correlation shows the potential of the RSCf both to serve as a quantitative link between soil roughness and overland flow generation by providing information regarding overland flow dynamics and to improve the overland flow hydrograph prediction.

  4. The plot size effect on soil erosion on rainfed agriculture land under different land uses in eastern Spain

    NASA Astrophysics Data System (ADS)

    Cerdà, A.; Bodí, M. B.; Burguet, M.; Segura, M.; Jovani, C.

    2009-04-01

    Soil erosion at slope scale is dependent on the size of the plot. This is because soil erosion is a scale-dependent process due to the spatial variability in infiltration, the potential for sediment to be captured by vegetation and other roughness components, and the changes in erosion rates and processes with increasing amounts of runoff. The effects of plot size may also vary with land use, as plot size may be less important in areas with a more homogeneous plant cover or bares soils; meanwhile the soil transmission losses will higher on vegetation covered soils and on patchy distributed plants. A series of study plots were established in 2003 at the El Teularet experimental Station in the Sierra de Enguera in eastern Spain. The overall goal is to assess runoff and erosion rates from different land uses at different spatial scales. Thirteen sets of plots have been established, and each set consists of five adjacent plots that vary in size from 1 m2 (1 x 1 m), 2 m2 (1 x 2 m), 4 m2 (1 x 4 m), 16 m2 (2 x 8 m) and 48 m2 (3 m wide x 16 m length). Each set of plots has a different land use, and the land uses being tested in the first year of this study are fallow, ploughed but unplanted, untilled oats and beans, tilled oats and beans, straw mulch, mulched with chipped olive branches, a geotextile developed to control erosion on agricultural fields, scrub oaks (Quercus coccifera), gorse (Ulex parviflorus), and three herbicide treatments—a systemic herbicide, a contact herbicide, and a persistent herbicide. From those plots, three plots were selected to analyse the effect of the size of the plot on the soil erosion assessment. Herbicide (bare), Catch crops (oat) and scrubland were selected to analyze the soil losses during 2004 and 2005. The results shows that sediment delivery is highly dependent on the land use and land management as the scrubland contributed with null sediment yield, meanwhile the herbicide reached the largest soil loss. The soil erosion was higher

  5. Optimal Allocation of Maximum Allowable Discharged Total Nitrogen Load among Field Plots in Agricultural Watershed

    NASA Astrophysics Data System (ADS)

    Maeda, Shigeya; Yoshikawa, Kazuki; Takeuchi, Junichiro; Kawachi, Toshihiko; Chono, Shunsuke; Unami, Koichi

    A multiobjective optimization model is developed for controlling TN (Total Nitrogen) load discharged from field plots in an agricultural watershed. In optimization, maximizations of allowable TN discharge per unit area and total yield of rice are intended while complying with an effluent limitation standard prescribed for river water quality management. The discharge from a field plot is separated into two components, i.e., direct runoff and baseflow. As discharged TN from a plot travels with these components toward an outlet of the watershed, the amount of TN is assumed to decrease due to distance-related self-purification occurring in subsurface zone, drainage canal and river. Locations of field plots and traveling routes of TN are identified or predicted by a GIS (Geographic Information System) with a digital elevation model and by field surveys. The model developed is applied to an agricultural watershed bordering with Lake Biwa in Shiga Prefecture, Japan. The result demonstrates that the optimal allocation of maximum allowable discharged TN load among field plots is helpful in prioritizing plots where fertilization should be reduced.

  6. TEST REACTOR AREA PLOT PLAN CA. 1968. MTR AND ETR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TEST REACTOR AREA PLOT PLAN CA. 1968. MTR AND ETR AREAS SOUTH OF PERCH AVENUE. "COLD" SERVICES NORTH OF PERCH. ADVANCED TEST REACTOR IN NEW SECTION WEST OF COLD SERVICES SECTION. NEW PERIMETER FENCE ENCLOSES BETA RAY SPECTROMETER, TRA-669, AN ATR SUPPORT FACILITY, AND ATR STACK. UTM LOCATORS HAVE BEEN DELETED. IDAHO NUCLEAR CORPORATION, FROM A BLAW-KNOX DRAWING, 3/1968. INL INDEX NO. 530-0100-00-400-011646, REV. 0. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. Characterization of flow and infiltration processes on agricultural plots irrigated by submersion.

    NASA Astrophysics Data System (ADS)

    Alkassem Alosman, Mohamed; Ruy, Stéphane; Olioso, Albert; Bader, Jean Claude; Buis, Samuel; Lecharpentier, Patrice; Charron, Francois

    2015-04-01

    The surface irrigation (flood irrigation, trickle and furrow) is a traditional irrigation system widely used worldwide. This system is recognized as being highly water consumer: high volumes of water are injected to the plot, which generate significant loss of water (drainage and run-off). Although these unused water flows can generate positive externalities (feeding wetlands, groundwater recharge) a decrease of water volume used is sought in a context of limited water resource. In this system of irrigation, the amount of water that is actually brought to the plot surface ("irrigation dose") is insufficiently known because it depends on the interaction between the propagation of water at surface of the plot and its infiltration into the soil. These two processes are conditioned by multiple factors: input flow rate in the plot, irrigation duration, soil properties (hydraulic conductivity, water reserve and depth), geometry of the parcel, hydraulic factors (slope of flow, coefficient of friction hydraulic). A methodology is therefore needed for calculating the doses given on an agricultural plot in order to analyse current practices and to propose ways for optimization. The aim of this study is to develop a methodology to estimate (i) the amount of infiltrated water at the scale of a flood irrigated agricultural field, and (ii) soil properties (permeability, useful water reserve). This work is based on the use of a flood irrigation model (CALHY, model Bader et al., 2010, Hydrol. Sci. J., 55, 177-191) combined with a device for tracking the infiltration and the advancing of water in several fields of hay which are irrigated through submersion. Firstly, a sensitivity analysis was used to define an optimal experimental configuration with respect to the estimation of parameters of interest (hydraulic friction, soil water storage capacity, hydraulic conductivity, soil depth). This analysis was performed on each of the model parameters and for different output variables

  8. A Performance Comparison on the Probability Plot Correlation Coefficient Test using Several Plotting Positions for GEV Distribution.

    NASA Astrophysics Data System (ADS)

    Ahn, Hyunjun; Jung, Younghun; Om, Ju-Seong; Heo, Jun-Haeng

    2014-05-01

    It is very important to select the probability distribution in Statistical hydrology. Goodness of fit test is a statistical method that selects an appropriate probability model for a given data. The probability plot correlation coefficient (PPCC) test as one of the goodness of fit tests was originally developed for normal distribution. Since then, this test has been widely applied to other probability models. The PPCC test is known as one of the best goodness of fit test because it shows higher rejection powers among them. In this study, we focus on the PPCC tests for the GEV distribution which is widely used in the world. For the GEV model, several plotting position formulas are suggested. However, the PPCC statistics are derived only for the plotting position formulas (Goel and De, In-na and Nguyen, and Kim et al.) in which the skewness coefficient (or shape parameter) are included. And then the regression equations are derived as a function of the shape parameter and sample size for a given significance level. In addition, the rejection powers of these formulas are compared using Monte-Carlo simulation. Keywords: Goodness-of-fit test, Probability plot correlation coefficient test, Plotting position, Monte-Carlo Simulation ACKNOWLEDGEMENTS This research was supported by a grant 'Establishing Active Disaster Management System of Flood Control Structures by using 3D BIM Technique' [NEMA-12-NH-57] from the Natural Hazard Mitigation Research Group, National Emergency Management Agency of Korea.

  9. Plot and Catchment Scale Hydrological Impacts of Agricultural Field Boundary Features

    NASA Astrophysics Data System (ADS)

    Coates, Victoria; Pattison, Ian

    2015-04-01

    Natural flood management aims to reduce downstream flow levels by delaying the movement of water through a catchment and increasing the amount of soil infiltration. Field boundary features such as hedgerows and dry stone walls are common features in the rural landscape. It is hypothesised that there presence could reduce runoff connectivity and change the soil moisture levels by altering the soil structure and porosity. The use of larger agricultural machinery has resulted in the removal of field boundaries and the subsequent increase in field sizes over the 20th Century. This change in the rural landscape is likely to have changed the partitioning of rainfall into runoff and the hydrological pathways throughout the catchment. However, the link between field boundaries and catchment scale flood risk has not yet been proven. We aim to address this need for evidence to support natural flood management by focussing on these widespread features in the rural landscape. Firstly, we quantify the change in the density of field boundaries over the past 120 years for the Skell catchment, Northern England using historical OS maps. The analysis has shown that field size has approximately doubled in the Skell catchment since 1892, due to the removal of field boundaries. Secondly, we assess the effect of field boundaries on local soil characteristics and hydrological processes through plot scale continuous monitoring of the hydrological processes along a 20m transect through the linear boundary features. For the summer period results show that soil moisture levels are lower immediately next to the hedgerow compared to distances greater than 1m from the hedgerow. Finally, we use this data to parameterise and validate a catchment scale hydrological model. The model is then applied to test the impact of a network of field boundaries on river flow extremes at the catchment scale.

  10. Sampling network stratification by terrain classification in eroded agricultural landscapes at plot scale

    NASA Astrophysics Data System (ADS)

    Penížek, Vít; Zádorová, Tereza; Kodešová, Radka

    2015-04-01

    The description of soil properties variability is important aspect in land management and food production at plot scale. We describe novelty approach for design of sampling network on agricultural plots with high relief variability. The terrain properties were used for improved spatial prediction of soil properties including design of the sampling network. Regular sampling network, random sampling network, systematic unaligned sampling network and stratified sampling network schemes were compared to prove the advantages of relief based stratified sampling networks. The study was performed for humus horizon depth prediction on agriculture plot of 6.5 ha with dissected relief where originally homogenous soil cover was differentiated by erosion and sedimentation into mosaic of Chernozem, Regosol and colluvial soils. Moreover the comparison was done on three levels of sampling density (65, 40 and 24 sampling points). The stratification of sampling network was based on unsupervised relief classification. The performance of the soil properties prediction based on different sampling network was assesed by RMSE calculation based on predicted values versus validation dataset. According the RMSE, the stratified sampling network performed the best (7.4 cm) comparing the regular sampling network (10.8 cm), random sampling network (17.7 cm) and systematic unaligned sampling network (11.2 cm). The accuracy of the soil properties spatial prediction decreased with the decreasing number of sampling points, but the stratified network performed significantly better that other used methods. The study showed that, for soil properties spatial variability description at certain accuracy level, relief-based stratified network can contain 25 % less sampling points comparing to regular network. This leads to potential financial and person cost reduction for the soil survey. The study was supported by grant nr. 13-07516P of the Czech science foundation and by grant nr. QJ1230319 of the

  11. Improved discrimination among similar agricultural plots using red-and-green-based pseudo-colour imaging

    NASA Astrophysics Data System (ADS)

    Doi, Ryoichi

    2016-04-01

    The effects of a pseudo-colour imaging method were investigated by discriminating among similar agricultural plots in remote sensing images acquired using the Airborne Visible/Infrared Imaging Spectrometer (Indiana, USA) and the Landsat 7 satellite (Fergana, Uzbekistan), and that provided by GoogleEarth (Toyama, Japan). From each dataset, red (R)-green (G)-R-G-blue yellow (RGrgbyB), and RGrgby-1B pseudo-colour images were prepared. From each, cyan, magenta, yellow, key black, L*, a*, and b* derivative grayscale images were generated. In the Airborne Visible/Infrared Imaging Spectrometer image, pixels were selected for corn no tillage (29 pixels), corn minimum tillage (27), and soybean (34) plots. Likewise, in the Landsat 7 image, pixels representing corn (73 pixels), cotton (110), and wheat (112) plots were selected, and in the GoogleEarth image, those representing soybean (118 pixels) and rice (151) were selected. When the 14 derivative grayscale images were used together with an RGB yellow grayscale image, the overall classification accuracy improved from 74 to 94% (Airborne Visible/Infrared Imaging Spectrometer), 64 to 83% (Landsat), or 77 to 90% (GoogleEarth). As an indicator of discriminatory power, the kappa significance improved 1018-fold (Airborne Visible/Infrared Imaging Spectrometer) or greater. The derivative grayscale images were found to increase the dimensionality and quantity of data. Herein, the details of the increases in dimensionality and quantity are further analysed and discussed.

  12. Evaluation of the Soil Conservation Service curve number methodology using data from agricultural plots

    NASA Astrophysics Data System (ADS)

    Lal, Mohan; Mishra, S. K.; Pandey, Ashish; Pandey, R. P.; Meena, P. K.; Chaudhary, Anubhav; Jha, Ranjit Kumar; Shreevastava, Ajit Kumar; Kumar, Yogendra

    2016-08-01

    The Soil Conservation Service curve number (SCS-CN) method, also known as the Natural Resources Conservation Service curve number (NRCS-CN) method, is popular for computing the volume of direct surface runoff for a given rainfall event. The performance of the SCS-CN method, based on large rainfall (P) and runoff (Q) datasets of United States watersheds, is evaluated using a large dataset of natural storm events from 27 agricultural plots in India. On the whole, the CN estimates from the National Engineering Handbook (chapter 4) tables do not match those derived from the observed P and Q datasets. As a result, the runoff prediction using former CNs was poor for the data of 22 (out of 24) plots. However, the match was little better for higher CN values, consistent with the general notion that the existing SCS-CN method performs better for high rainfall-runoff (high CN) events. Infiltration capacity (fc) was the main explanatory variable for runoff (or CN) production in study plots as it exhibited the expected inverse relationship between CN and fc. The plot-data optimization yielded initial abstraction coefficient (λ) values from 0 to 0.659 for the ordered dataset and 0 to 0.208 for the natural dataset (with 0 as the most frequent value). Mean and median λ values were, respectively, 0.030 and 0 for the natural rainfall-runoff dataset and 0.108 and 0 for the ordered rainfall-runoff dataset. Runoff estimation was very sensitive to λ and it improved consistently as λ changed from 0.2 to 0.03.

  13. Legumes increase rhizosphere carbon and nitrogen relative to cereals in California agricultural plots

    NASA Astrophysics Data System (ADS)

    Bergman, R.; Maltais-landry, G.

    2013-12-01

    Nitrogen (N) is an essential nutrient to plant growth, therefore a sufficient supply is needed for high yields. By using N-fixing plants like legumes in crop rotation, we can increase soil N and yields of following crops. Furthermore, legumes also affect soil carbon (C) and C:N ratios, which impacts nutrient cycling in soils. We assessed the effects of two legumes (vetch, fava bean) and a cereal mixture (oats and wheat) on soil N and C by comparing both rhizosphere and bulk soils. We studied the impacts of these plants with different management types (organic, low-input conventional, unfertilized) to see if plant effects on soil C and N changed across management. We used plots from the Long-Term Research on Agricultural Systems (LTRAS) experiment (Davis, CA) to conduct this experiment, where three plots were under each management type. Within each of these plots, we sampled three micro-plots, where we collected rhizosphere soil from fava bean, vetch, and cereals as well as bulk soil, i.e. non-rhizosphere soil. We collected 108 samples, each of which were dried and ball-milled into a fine, uniform powder. Tin capsules with 15-30mg of soil were then analyzed with a Carlo Erba Elemental analyzer to measure how much N and C was present in each of the samples. The different management types didn't affect the relationship among plants, but soil C and N were highest in organic and lowest in unfertilized plots. We found that N was significantly higher in legume rhizosphere than cereal rhizosphere and bulk soils. Soil C was also higher in legumes vs. cereals and bulk soils, but the only significant difference was with the bulk soils. This ultimately resulted in lower C:N ratios in the rhizosphere of legumes, only vetch, however, had significantly lower soil C:N than cereals. Vetch had higher N, and lower C and C:N than fava bean, but the difference between the two legumes was never significant. Similarly, cereals had higher C and N and lower C:N than bulk soils, although

  14. Soil micronutrients at the plot scale under agricultural and forest soil uses

    NASA Astrophysics Data System (ADS)

    da Silva Días, Rosane; Vidal Vázquez, Eva; dos Santos Batista Bonini, Carolina; Marasca, Indiamara; Paz-Ferreiro, Jorge

    2013-04-01

    Land use practices affect soil properties and nutrient supply. Very limited data are available on the heavy metal extractability in northwest Spain. The aim of this study is to analyze long-term effects of land use on the supply, variability and spatial distribution of soil nutrients, which was undertaken by comparison of a forest and a cultivated stand, rich in organic matter content. The study was carried out in an acid, rich in organic matter soil developed over sediments at the province of Lugo, northwestern of Spain. Adjacent plots with were marked on regular square grids with 2-m spacing. Fe, Mn, Zn and Cu were extracted both by Mehlich-3 and DTPA solutions and determined by ICP-MS. General soil chemical and physical properties were routinely analyzed. In arable land microelement concentration ranges were as follows: Fe (100 and 135 mg/Kg), Mn (7.6 and 21.5 mg/Kg), Zn (0.6 and 3.7 mg/Kg), Cu (0.2 and 0.7 mg/Kg). In forest land, these ranges were: Fe (62 and 309 mg/Kg), Mn (0.2 and 2.1 mg/Kg), Zn (0.2 and 2.9 mg/Kg), Cu (0.1 and 0.2 mg/Kg), Microelement concentrations extracted both with DTPA and Mehlich-3 were higher in the cultivated than in the forest stand, being Fe-DTPA the exception. Coefficients of variation were higher for the microelement content of the soil under forest. Principal component analysis was performed to evaluate associations between extractable microelements and general physico-chemical properties. At the study scale, nutrient management is the main factor affecting the agricultural site, whereas soil-plant interactions are probably driving the higher variation within the forest site. Patterns of spatial variability of the study nutrients at the small plot scale were assessed by geostatistical techniques. Results are discussed in the frame of organic matter decline with conventional tillage and sustainable land use.

  15. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property... Well records and reports, plots and maps, samples, tests and surveys. Any technical data...

  16. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property... Well records and reports, plots and maps, samples, tests and surveys. Any technical data...

  17. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property... Well records and reports, plots and maps, samples, tests and surveys. Any technical data...

  18. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property... Well records and reports, plots and maps, samples, tests and surveys. Any technical data...

  19. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property... Well records and reports, plots and maps, samples, tests and surveys. Any technical data...

  20. Farnsworth and Kinnear method of plotting the Farnsworth Munsell 100-Hue test scores: a comparison

    NASA Astrophysics Data System (ADS)

    Seshadri, Jayasree; Lakshminarayanan, Vasudevan; Christensen, Jerry

    2006-11-01

    We have compared two different methods of plotting the Farnsworth Munsell FM-100 test, namely the Farnsworth and the Kinnear techniques. Data from 30 individuals having a red-green deficiency were plotted using both techniques. The cap score distributions were analysed using both the Knobaluch Sine wave (Fourier) and the the Red-Green and Blue-Yellow partial scoring methods. We found that the Farnsworth and Kinnear plots give different results for the measures obtained by the Knoblauch method of analysis. On the other hand, the ‘difference score’ obtained from the King-Smith et al. method were not significantly different for the two plotting methods.

  1. Perennial vegetation data from permanent plots on the Nevada Test Site, Nye County, Nevada

    USGS Publications Warehouse

    Webb, Robert H.; Murov, Marilyn B.; Esque, Todd C.; Boyer, Diane E.; DeFalco, Lesley A.; Haines, Dustin F.; Oldershaw, Dominic; Scoles, Sara J.; Thomas, Kathryn A.; Blainey, Joan B.; Medica, Philip A.

    2003-01-01

    Perennial vegetation data from 68 permanent plots on the Nevada Test Site, Nye County, Nevada, are given for the period of 1963 through 2002. Dr. Janice C. Beatley established the plots in 1962 and then remeasured them periodically from 1963 through 1975. We remeasured 67 of these plots between 2000 and 2003; the remaining plot was destroyed at some time between 1975 and 1993. The plots ranged from 935 to 2,274 m in elevation and are representative of common plant associations of the Mojave Desert, the transition to Great Basin Desert, and pinyon-juniper woodlands. The purpose of this report is to describe the complete set of ecological data that Beatley collected from the Nevada Test Site from 1963 through 1975 and to present the data for perennial vegetation collected from 2000 through 2003.

  2. Effect of Season on the Persistence of Bacterial Pathogens in Runoff from Agricultural Plots

    EPA Science Inventory

    Runoff from agricultural fields undergoing manure applications may carry a variety of chemical and microbial contaminants that compromise water quality and increase the possibility of human exposure to pathogenic microorganisms when recreational waters are impacted. A series of r...

  3. Evaluation of the Plot Method for Identifying Potentially Biased Test Items.

    ERIC Educational Resources Information Center

    Hambleton, Ronald K.; Rogers, H. Jane

    This report was designed to respond to two major methodological shortcomings in the item bias literature: (1) misfitting test models; and (2) the use of significance tests. Specifically, the goals of the research were to describe a newly developed method known as the "plot method" for identifying potentially biased test items and to…

  4. From GCM grid cell to agricultural plot: scale issues affecting modelling of climate impact

    PubMed Central

    Baron, Christian; Sultan, Benjamin; Balme, Maud; Sarr, Benoit; Traore, Seydou; Lebel, Thierry; Janicot, Serge; Dingkuhn, Michael

    2005-01-01

    General circulation models (GCM) are increasingly capable of making relevant predictions of seasonal and long-term climate variability, thus improving prospects of predicting impact on crop yields. This is particularly important for semi-arid West Africa where climate variability and drought threaten food security. Translating GCM outputs into attainable crop yields is difficult because GCM grid boxes are of larger scale than the processes governing yield, involving partitioning of rain among runoff, evaporation, transpiration, drainage and storage at plot scale. This study analyses the bias introduced to crop simulation when climatic data is aggregated spatially or in time, resulting in loss of relevant variation. A detailed case study was conducted using historical weather data for Senegal, applied to the crop model SARRA-H (version for millet). The study was then extended to a 10°N–17° N climatic gradient and a 31 year climate sequence to evaluate yield sensitivity to the variability of solar radiation and rainfall. Finally, a down-scaling model called LGO (Lebel–Guillot–Onibon), generating local rain patterns from grid cell means, was used to restore the variability lost by aggregation. Results indicate that forcing the crop model with spatially aggregated rainfall causes yield overestimations of 10–50% in dry latitudes, but nearly none in humid zones, due to a biased fraction of rainfall available for crop transpiration. Aggregation of solar radiation data caused significant bias in wetter zones where radiation was limiting yield. Where climatic gradients are steep, these two situations can occur within the same GCM grid cell. Disaggregation of grid cell means into a pattern of virtual synoptic stations having high-resolution rainfall distribution removed much of the bias caused by aggregation and gave realistic simulations of yield. It is concluded that coupling of GCM outputs with plot level crop models can cause large systematic errors due to

  5. Optimal management of water resources demand and supply in irrigated agriculture from plot to regional scale

    NASA Astrophysics Data System (ADS)

    Schütze, Niels; Wagner, Michael

    2016-04-01

    Growing water scarcity in agriculture is an increasing problem in future in many regions of the world. For assessing irrigation as a measure to increase agricultural water security a generalized stochastic optimization framework for a spatial distributed estimation of future irrigation water demand is proposed, which ensures safe yields and a high water productivity at the same time. Different open loop and closed loop control strategies are evaluated within this stochastic optimization framework in order to generate reliable stochastic crop water production functions (SCWPF). The resulting database of SCWPF can serve as a central decision support tool for both, (i) a cost benefit analysis of farm irrigation modernization on a local scale and (ii) a regional water demand management using a multi-scale approach for modeling and implementation. The new approach is applied using the example of a case study in Saxony, which is dealing with the sustainable management of future irrigation water demands and its implementation.

  6. Technical note: A significance test for data-sparse zones in scatter plots

    NASA Astrophysics Data System (ADS)

    Vetrova, V. V.; Bardsley, W. E.

    2012-04-01

    Data-sparse zones in scatter plots of hydrological variables can be of interest in various contexts. For example, a well-defined data-sparse zone may indicate inhibition of one variable by another. It is of interest therefore to determine whether data-sparse regions in scatter plots are of sufficient extent to be beyond random chance. We consider the specific situation of data-sparse regions defined by a linear internal boundary within a scatter plot defined over a rectangular region. An Excel VBA macro is provided for carrying out a randomisation-based significance test of the data-sparse region, taking into account both the within-region number of data points and the extent of the region. Example applications are given with respect to a rainfall time series from Israel and also to validation scatter plots from a seasonal forecasting model for lake inflows in New Zealand.

  7. Technical Note: A significance test for data-sparse zones in scatter plots

    NASA Astrophysics Data System (ADS)

    Vetrova, V. V.; Bardsley, W. E.

    2012-01-01

    Data-sparse zones in scatter plots of hydrological variables can be of interest in various contexts. For example, a well-defined data-sparse zone may indicate inhibition of one variable by another. It is of interest therefore to determine whether data-sparse regions in scatter plots are of sufficient extent to be beyond random chance. We consider the specific situation of data-sparse regions defined by a linear internal boundary within a scatter plot defined over a rectangular region. An Excel VBA macro is provided for carrying out a randomisation-based significance test of the data-sparse region, taking into account both the within-region number of data points and the extent of the region. Example applications are given with respect to a rainfall time series from Israel and to validation scatter plots from a seasonal forecasting model for lake inflows in New Zealand.

  8. Integrated management of water resources demand and supply in irrigated agriculture from plot to regional scale

    NASA Astrophysics Data System (ADS)

    Schütze, Niels; Wagner, Michael

    2016-05-01

    Growing water scarcity in agriculture is an increasing problem in future in many regions of the world. Recent trends of weather extremes in Saxony, Germany also enhance drought risks for agricultural production. In addition, signals of longer and more intense drought conditions during the vegetation period can be found in future regional climate scenarios for Saxony. However, those climate predictions are associated with high uncertainty and therefore, e.g. stochastic methods are required to analyze the impact of changing climate patterns on future crop water requirements and water availability. For assessing irrigation as a measure to increase agricultural water security a generalized stochastic approach for a spatial distributed estimation of future irrigation water demand is proposed, which ensures safe yields and a high water productivity at the same time. The developed concept of stochastic crop water production functions (SCWPF) can serve as a central decision support tool for both, (i) a cost benefit analysis of farm irrigation modernization on a local scale and (ii) a regional water demand management using a multi-scale approach for modeling and implementation. The new approach is applied using the example of a case study in Saxony, which is dealing with the sustainable management of future irrigation water demands and its implementation.

  9. Design of field test plots for a sloped waste rock surface

    SciTech Connect

    O`Kane, M.; Stoicescu, J.; Haug, M.; Januszewski, S.; Mchaina, D.M.

    1998-12-31

    Westmin Resources Limited is a Western Canadian mining company with producing interests in base and precious metals and coals. Westmin`s Myra Falls Operations produce copper, zinc, and gold concentrates. The Myra Falls Operations are located in the central interior of Vancouver Island in a hanging glacial valley. Mean annual precipitation is approximately 3,000 mm with more than 75% occurring during the months of October to April. Historic surface deposition of waste rock has resulted in acid rock drainage (ARD). An applied research program was initiated to develop a cover system for the waste rock material at the Myra Falls site. The objective is to develop a cover system which controls the ingress of oxygen and infiltration of water, while providing a medium for sustainable vegetation that is consistent with the end land use of the area. Progress to date suggests that modified local till materials (amended with either fly ash or bentonite) can be used in soil cover construction. Four test plots were designed using two-dimensional saturated-unsaturated modelling tools to ensure that the performance of each test plot was representative of a full scale ARD cover system. This paper summarizes the design philosophy and principles of the cover system as well as the methodology for the two-dimensional numerical modelling program. Conclusions and results from the numerical modelling program are presented with a focus on implications for construction of the field test plots and installation of the performance monitoring instruments. The numerical modelling demonstrated that the hydraulic performance of a soil cover system placed on a sloped waste rock surface will be much different than that predicted by idealized one-dimensional numerical models, and in general current design methodologies. The modelling clearly demonstrated that the design of small scale field test plots was not a simple task. The physical dimensions of the field test plots had a significant impact on

  10. Three computer codes to read, plot and tabulate operational test-site recorded solar data

    NASA Technical Reports Server (NTRS)

    Stewart, S. D.; Sampson, R. S., Jr.; Stonemetz, R. E.; Rouse, S. L.

    1980-01-01

    Computer programs used to process data that will be used in the evaluation of collector efficiency and solar system performance are described. The program, TAPFIL, reads data from an IBM 360 tape containing information (insolation, flowrates, temperatures, etc.) from 48 operational solar heating and cooling test sites. Two other programs, CHPLOT and WRTCNL, plot and tabulate the data from the direct access, unformatted TAPFIL file. The methodology of the programs, their inputs, and their outputs are described.

  11. Surface stabilization and revegetation test plots. Fiscal year 1993 status report

    SciTech Connect

    Sackschewsky, M.R.; Kemp, C.J.; Hayward, W.M.

    1993-09-01

    Westinghouse Hanford Company Decommissioning and Decontamination Engineering Group and Environmental Technology and Assessment Groups are developing new technologies to improve revegetation techniques for interim stabilization control over underground waste sites within the Radiation Area Remedial Action Program. Successful revegetation is an integral aspect of waste isolation strategy. Unfortunately, revegetation can be very difficult to achieve on the Hanford Site due to several factors: low annual precipitation, unpredictable timing of precipitation, low fertility of available soils, and coarse physical texture of soils covering waste sites. The tests in this report were performed during fiscal years 1992 and 1993 and include the use of two soil sealants in combination with bare soil and a soil/compost mixture and a comparison of a wheatgrass mixture and a native seed mixture. Hydroprobe access ports were placed in one-half of the test plots and moisture data was collected. Soil fertility and plant community characteristics were monitored during the two years of the test. During the first year all sites with compost provided additional fertility and retained greater amounts of soil moisture than noncomposted sites. The use of Enduraseal soil fixative provided greater soil moisture than the use of Aerospray-77 soil fixative. During the second year the use of compost and soil fixative`s had a lesser effect on soil moisture. During late summer periods all treatments had very similar soil moisture profiles. The use of compost greatly increased vegetative cover and soil fertility in comparison to sites that had no compost added. Testing of the seed mixtures found that Siberian wheatgrass and Sandberg`s bluegrass were the most dominant of the seeded species observed. All plots exhibited a dominant plant cover of volunteer cheatgrass. Biomass production was significantly greater on plots with compost than on the noncomposted plots.

  12. LPT. Plot plan and site layout. Includes shield test pool/EBOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LPT. Plot plan and site layout. Includes shield test pool/EBOR facility. (TAN-645 and -646) low power test building (TAN-640 and -641), water storage tanks, guard house (TAN-642), pump house (TAN-644), driveways, well, chlorination building (TAN-643), septic system. Ralph M. Parsons 1229-12 ANP/GE-7-102. November 1956. Approved by INEEL Classification Office for public release. INEEL index code no. 038-0102-00-693-107261 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  13. Genotoxicity changes in test plot soil: Impact on risk assessment at a contaminated site planning bioremediation

    SciTech Connect

    Collie, S.L.; Donnelly, K.C.

    1995-12-31

    Soil samples from test plots designed to investigate the suitability of biodegradation to reduce levels of polycyclic aromatic hydrocarbons (PAHs) and pentachlorophenol (PCP) were collected and solvent-extracted throughout a four-month study. Samples were followed for contaminant concentration and genotoxicity. Test plots were constructed to represent four concentrations of contaminated soil. Although the highest PCP concentration plot was negative in the Salmonella/microsome plate incorporation both with and without metabolic activation at the beginning of the treatment period, these soils became cytotoxic by the end of the study when tested without metabolic activation, and chemical analysis indicated no degradation of PCP. The methanol extract from the lowest PCP concentration plot was positive in the plate incorporation assay at the beginning of the study with an average weighted activity of 29 revertants/gram soil without and 32 revertants/g with metabolic activation at the highest dose level. The mutagenic potential of the methanol extract of this soil increased to an average weighted activity of 306 revertants/g without and 291 revertants/g with metabolic activation, despite a reduction from 46 to below 10 {micro}g PCP/g soil. A human health risk assessment employing the current US/EPA method of incorporating chemical concentration data in calculating cancer risk was then compared with the level of risk that can be inferred from the corresponding bioassay data. These findings emphasize the need for careful remediation design as this step will prove critical in achieving both maximum biodegradation and protection of human health.

  14. Effectiveness of Conservation Measures in Reducing Runoff and Soil Loss Under Different Magnitude-Frequency Storms at Plot and Catchment Scales in the Semi-arid Agricultural Landscape.

    PubMed

    Zhu, T X

    2016-03-01

    In this study, multi-year stormflow data collected at both catchment and plot scales on an event basis were used to evaluate the efficiency of conservation. At the catchment scale, soil loss from YDG, an agricultural catchment with no conservation measures, was compared with that from CZG, an agricultural catchment with an implementation of a range of conservation measures. With an increase of storm recurrence intervals in the order of <1, 1-2, 2-5, 5-10, 10-20, and >20 years, the mean event sediment yield was 639, 1721, 5779, 15191, 19627, and 47924 t/km(2) in YDG, and was 244, 767, 3077, 4679, 8388, and 15868 t/km(2) in CZG, which represented a reduction effectiveness of 61.8, 55.4, 46.7, 69.2, 57.2, and 66.8 %, respectively. Storm events with recurrence intervals greater than 2 years contributed about two-thirds of the total runoff and sediment in both YDG and CZG catchments. At the plot scale, soil loss from one cultivated slopeland was compared with that from five conservation plots. The mean event soil loss was 1622 t/km(2) on the cultivated slopeland, in comparison to 27.7 t/km(2) on the woodland plot, 213 t/km(2) on the grassland plot, 467 t/km(2) on the alfalfa plot, 236 t/km(2) on the terraceland plot, and 642 t/km(2) on the earthbank plot. Soil loss per unit area from all the plots was significantly less than that from the catchments for storms of all categories of recurrence intervals.

  15. Effectiveness of Conservation Measures in Reducing Runoff and Soil Loss Under Different Magnitude-Frequency Storms at Plot and Catchment Scales in the Semi-arid Agricultural Landscape

    NASA Astrophysics Data System (ADS)

    Zhu, T. X.

    2016-03-01

    In this study, multi-year stormflow data collected at both catchment and plot scales on an event basis were used to evaluate the efficiency of conservation. At the catchment scale, soil loss from YDG, an agricultural catchment with no conservation measures, was compared with that from CZG, an agricultural catchment with an implementation of a range of conservation measures. With an increase of storm recurrence intervals in the order of <1, 1-2, 2-5, 5-10, 10-20, and >20 years, the mean event sediment yield was 639, 1721, 5779, 15191, 19627, and 47924 t/km2 in YDG, and was 244, 767, 3077, 4679, 8388, and 15868 t/km2 in CZG, which represented a reduction effectiveness of 61.8, 55.4, 46.7, 69.2, 57.2, and 66.8 %, respectively. Storm events with recurrence intervals greater than 2 years contributed about two-thirds of the total runoff and sediment in both YDG and CZG catchments. At the plot scale, soil loss from one cultivated slopeland was compared with that from five conservation plots. The mean event soil loss was 1622 t/km2 on the cultivated slopeland, in comparison to 27.7 t/km2 on the woodland plot, 213 t/km2 on the grassland plot, 467 t/km2 on the alfalfa plot, 236 t/km2 on the terraceland plot, and 642 t/km2 on the earthbank plot. Soil loss per unit area from all the plots was significantly less than that from the catchments for storms of all categories of recurrence intervals.

  16. F-15 inlet/engine test techniques and distortion methodologies studies. Volume 2: Time variant data quality analysis plots

    NASA Technical Reports Server (NTRS)

    Stevens, C. H.; Spong, E. D.; Hammock, M. S.

    1978-01-01

    Time variant data quality analysis plots were used to determine if peak distortion data taken from a subscale inlet model can be used to predict peak distortion levels for a full scale flight test vehicle.

  17. Experimental and numerical test of the micrometeorological mass difference technique for the measurement of trace gas emissions from small plots.

    PubMed

    Magliulo, Vincenzo; Alterio, Giovanni; Peressotti, Alessandro

    2004-05-01

    Micrometeorological methods for measuring fluxes of gases between the land surface and the atmosphere are non-invasive: in fact, they do not interfere with natural processes of gas exchange. The Micrometeorological Mass Difference (MMD) approach can be used for many environmental monitoring purposes, such as to measure methane and carbon dioxide emission from landfills, methane production by grazing animals, trace gas emission from waste products and from agricultural soils, photosynthesis, and transpiration of plant canopies. The purpose of this study is to adapt the MMD technique, originally developed in Australia, to monitor CO2 and trace gases exchange rate at the plot level. Comparison of different treatments in replicated experiments requires plots of few rather than tens of meters. The tests reported here were performed on a square area (4 m x 4 m) in the meteorological field of the experimental farm of CNR-ISAFOM located in Vitulazio, province of Caserta, Italy (40 degrees 07' N, 14 degrees 50' E, 25 m above sea level) and consisted of the release of pure CO2 at different rates (1.7, 1.3, 0.6 L min(-1)) from a single source on the ground in the center of the experimental area and the consequent measurement of the environmental variables (wind speed and direction, CO2 concentration) at different times at four heights (up to 1.2 m) in order to compute the mass balance according to MMD technique. Measured flow rates well accounted for the mass of CO2 released. A flow underestimation occurred when wind speed dropped below 1.5 m s(-1), in accord with the previous findings obtained in Australia: this happened because anemometers can stall at low speeds, and their measurements are unreliable and because of significant loss of mass from the top of the apparatus. The experimental results were compared with outputs of Computational Fluid Dynamic (CFD) simulations. The commercial CFD package Fluent was used to evaluate performances and sources of errors. According to

  18. Analysis of the dynamics of soil infiltrability of agricultural soils from continuous rainfall-runoff measurements on small plots

    NASA Astrophysics Data System (ADS)

    Léonard, J.; Ancelin, O.; Ludwig, B.; Richard, G.

    2006-07-01

    In this study, data from continuous measurement of natural rainfall and runoff rates on nine 2 m 2 runoff plots were used to analyse the dynamics of infiltration and how it relates to the evolution of the soil surface state. All measurements were performed on two cropped sites in northern France on low slope loess soils, with low rainfall intensities. Crops represented were maize, wheat and sugar beet. Infiltrability was characterized at the scale of the plot and of the rainfall event by a single parameter, the constant infiltrability that yields an excess rainfall hyetograph with a volume equal to the measured runoff volume ( ϕ index). Results indicated that: (1) even if the runoff plots were installed on two catchments where water erosion was important, the observed runoff volumes and intensities were very small. The runoff to rainfall ratio was typically less than 5% at the season to year scale; (2) the apparent infiltrability ϕ cannot be defined independently from rainfall intensity when runoff at the outlet of a plot comes from only a subset of the plot area. The relationship between rainfall intensity and apparent infiltrability can be used to estimate the relative runoff contributing area (≈0.10-0.35 in ourcase); (3) the development and nature of surface crusting has a major influence on the apparent infiltrability: there is a progressive shift of ϕ toward low values when crusting develops, which is predominantly due to an increase in the relative contributing area. From a methodological point of view, failure to include the rainfall intensity dependence of infiltrability in runoff modelling could introduce large errors on runoff predictions. This relationship between rainfall intensity and apparent infiltrability should thus be analysed when possible, and soil surface state characterization should include more information about connection between the different parts of a plot and its outlet.

  19. Wind, rain and soil erosion rates on bare and plant covered agriculture plots at the experimental station of El Teularet -Sierra de Enguera, Eastern Spain

    NASA Astrophysics Data System (ADS)

    Cerdà, A.; Azorin-Molina, C.; Iserloh, Th.

    2012-04-01

    Soil erosion is being scientifically researched for more tan one century, but there is some knowledge lacks that should be researched. Within the factors of the soil erosion wind and rain were studied, but little is know about the impact of the combination of both. Soil erosion by wind was mainly studied on drylands and agriculture land (Sterk and Spaan, 1997; Bielders et al., 2002; Rajot et al., 2003; Zobeck et al., 2003). Soil erosion by water was studied in many ecosystems but it is especially active on agriculture land (Cerdà et al., 2009) and under Mediterranean climatic conditions (Cerdà et al., 2010). The importance of wind on soil erosion is base in the fact that rainstorms occurs with wind, adding a driving component to the falling raindrops. The influence of wind on raindrops is clear, but there is not measurements and there is no information of this influence under field conditions with natural rainfall events.This paper aims to determine the interaction between wind and rain as factors of the soil losses under Mediterranean climatic conditions and different agriculture managements and land uses. Since 2003, the El Teularet-Serra de Enguera Soil Erosion Experimental Station located in Eastern Spain is measuring the soil losses in plots under different land uses and land managements. The station is devoted to study the soil water erosion processes under rain-fed agriculture fields and the rangelands by means of simulated rainfall experiments and plots of different sizes. The soil erosion measure ments are done by means of 13 plots, each of them composed of 5 subplots of 1, 2, 4, 16 and 48 m2 under different land uses and managements. Two plots are covered by two different types of shrubs: Quercus coccifera and Ulex parviflorus, respectively. Three plots reproduce the use of herbicides, one is ploughed, and three plots follow conservation practices (oats and beans with no-tillage, with tillage, and with a vege- tation cover of weeds). Other plots are

  20. Recovery based on plot experiments is a poor predictor of landscape-level population impacts of agricultural pesticides.

    PubMed

    Topping, Christopher John; Kjaer, Lene Jung; Hommen, Udo; Høye, Toke Thomas; Preuss, Thomas G; Sibly, Richard M; van Vliet, Peter

    2014-07-01

    Current European Union regulatory risk assessment allows application of pesticides provided that recovery of nontarget arthropods in-crop occurs within a year. Despite the long-established theory of source-sink dynamics, risk assessment ignores depletion of surrounding populations and typical field trials are restricted to plot-scale experiments. In the present study, the authors used agent-based modeling of 2 contrasting invertebrates, a spider and a beetle, to assess how the area of pesticide application and environmental half-life affect the assessment of recovery at the plot scale and impact the population at the landscape scale. Small-scale plot experiments were simulated for pesticides with different application rates and environmental half-lives. The same pesticides were then evaluated at the landscape scale (10 km × 10 km) assuming continuous year-on-year usage. The authors' results show that recovery time estimated from plot experiments is a poor indicator of long-term population impact at the landscape level and that the spatial scale of pesticide application strongly determines population-level impact. This raises serious doubts as to the utility of plot-recovery experiments in pesticide regulatory risk assessment for population-level protection. Predictions from the model are supported by empirical evidence from a series of studies carried out in the decade starting in 1988. The issues raised then can now be addressed using simulation. Prediction of impacts at landscape scales should be more widely used in assessing the risks posed by environmental stressors.

  1. A computer program for plotting stress-strain data from compression, tension, and torsion tests of materials

    NASA Technical Reports Server (NTRS)

    Greenbaum, A.; Baker, D. J.; Davis, J. G., Jr.

    1974-01-01

    A computer program for plotting stress-strain curves obtained from compression and tension tests on rectangular (flat) specimens and circular-cross-section specimens (rods and tubes) and both stress-strain and torque-twist curves obtained from torsion tests on tubes is presented in detail. The program is written in FORTRAN 4 language for the Control Data 6000 series digital computer with the SCOPE 3.0 operating system and requires approximately 110000 octal locations of core storage. The program has the capability of plotting individual strain-gage outputs and/or the average output of several strain gages and the capability of computing the slope of a straight line which provides a least-squares fit to a specified section of the plotted curve. In addition, the program can compute the slope of the stress-strain curve at any point along the curve. The computer program input and output for three sample problems are presented.

  2. Application of GPS and Near-Surface Geophysical Methods to Evaluate Agricultural Test Plot Difference

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Real-time kinematic (RTK) GPS, ground penetrating radar, resistivity surveying, cone penetrometer probing, and soil sampling were used to measure soil properties that may influence future soil and water management research inherent to a selected set of research fields. A topographic map generated fr...

  3. Mineral composition of small-grain cultivars from a uniform test plot in South Dakota

    USGS Publications Warehouse

    Erdman, J.A.; Moul, R.C.

    1982-01-01

    Seventy-five cultivated varieties (cultivars) of hard red spring wheat (HRS), hard red winter wheat (HRW), durum wheat, oats, and barley were harvested in 1974 from a small-grain trial plot in Harding County, SD, just north of Buffalo. Analysis of the grains reported here includes crude protein for only the wheat cultivars, ash yield, and 17 chemical elements, many of which are not commonly given in the literature (such as B, Cd, Mo, Ni, and Se). Differences in composition between the two classes of hard red wheat indicate that HRS is significantly higher (p < 0.05) than HRW in protein content, ash yield, Ca, K, Mg, Na, P, total S, Sr, and Zn; Cd is significantly higher in the HRW cultivars. For the most part, concentrations were quite uniform within all grain types. Only two cultivars were anomalous: cv. Hi Plains in HRW wheats and cv. Astro in the oat group.

  4. Application of a LaserJet printer to plot the Farnsworth-Munsell 100-hue color test.

    PubMed

    Cooper, H; Bener, A

    1990-05-01

    This paper presents a quick method of computing Farnsworth-Munsell (FM-100) scores and displaying these values on the polar coordinate scale usually associated with this test. The displayed results also present the clinician with a graph of the extended normalized score against cap number and a D-15 panel plot. The output is printed at high resolution on a Hewlett-Packard (HP) LaserJet or a similar printer compatible with or able to emulate the HP. The program is written and compiled in Microsoft-C 5.0. The code can be easily modified either to be customized, or to be moved across compilers.

  5. The Effects of Data Structure on Total Time on Test Plots.

    DTIC Science & Technology

    1987-09-01

    transfer method. The total time on test program used is an adaptation of a Fortran pro- gram formulated by Lt. Col. Carlos Talbott, HQ USAF/LE-RD, in...NAME" OF RESPONSIBLE INDIVIPUAL 22b TELEPHONE (Include Area Code) 22c OrEiCE SYMB(X Pn~ ip E. M ller . Major USAF 513 255-5023 AFIT/LSM DO Form 1473, JUN

  6. F-15 inlet/engine test techniques and distortion methodologies studies. Volume 5: Effect of filter cutoff frequency on turbulence plots

    NASA Technical Reports Server (NTRS)

    Stevens, C. H.; Spong, E. D.; Hammock, M. S.

    1978-01-01

    The effect of filter cutoff frequency on turbulence plots were used to determine if peak distortion data taken from a subscale inlet model can be used to predict peak distortion levels for a full scale flight test vehicle.

  7. RSRM top hat cover simulator lightning test, volume 2. Appendix A: Resistance measurements. Appendix B: Lightning test data plots

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Resistance measurements are given in graphical for when a simulated lightning discharge strikes on an exposed top hat cover simulator. The test sequence was to measure the electric and magnetic fields induced inside a redesigned solid rocket motor case.

  8. A test of the variable circular-plot method where exact density of a bird population was known

    USGS Publications Warehouse

    Nelson, Jay T.; Fancy, Steven G.

    1999-01-01

    Variable circular-plot (VCP) counts are statistically more sound than point counts because they are adjusted for the probability of detecting birds at different distances and under different conditions. However, many ornithologists use point counts rather than VCP counts because they believe that assumptions of the VCP method are almost always violated, leading to poor results, and because earlier field tests using ad hoc analysis methods gave variable and relatively poor results. We conducted the first field test of the VCP method where the exact density of a forest bird was known as part of re-establishing the 'Oma'o Myadestes obscurus in former range. All 'Oma'o in the new population were intensively monitored by radio telemetry so that the number present during four VCP censuses was known. Excluding the first census, when three of the four detections were of the same individual, differences in VCP density estimates ranged from -34% to +24% (mean 0%) even though =18 'Oma'o were detected per survey. We review critical assumptions of the VCP method and make recommendations for data analysis based on our experience with the method on Pacific islands.

  9. Terrain and Spatial Effects on Hazard Prediction and Assessment Capability (HPAC) Software Dose-Rate Contour Plot Predictions as Compared to a Sample of Local Fallout Data from Test Detonations in the Continental United States, 1945-1962

    DTIC Science & Technology

    2006-03-01

    Operation Teapot - Zucchini ................................................................................54 Operation Plumbbob...71 Tests George, Ess, and Zucchini (Grouped) ........................................................76 All Six Tests...Ess).............................................................53 31. Zucchini Digitized DASA-EX Contour Plot

  10. Agriculture

    EPA Pesticide Factsheets

    The EPA Agriculture Resource Directory offers comprehensive, easy-to-understand information about environmental stewardship on farms and ranches; commonsense, flexible approaches that are both environmentally protective and agriculturally sound.

  11. 77 FR 54557 - Notice of Intent To Suspend the 2012 Census of Agriculture Content Testing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ...-54558] [FR Doc No: 2012-21740] DEPARTMENT OF AGRICULTURE National Agricultural Statistics Service Notice of Intent To Suspend the 2012 Census of Agriculture Content Testing AGENCY: National Agricultural..., Associate Administrator. [FR Doc. 2012-21740 Filed 9-4-12; 8:45 am] BILLING CODE 3410-20-P...

  12. Computer program TRACK_TEST for calculating parameters and plotting profiles for etch pits in nuclear track materials

    NASA Astrophysics Data System (ADS)

    Nikezic, D.; Yu, K. N.

    2006-01-01

    A computer program called TRACK_TEST for calculating parameters (lengths of the major and minor axes) and plotting profiles in nuclear track materials resulted from light-ion irradiation and subsequent chemical etching is described. The programming steps are outlined, including calculations of alpha-particle ranges, determination of the distance along the particle trajectory penetrated by the chemical etchant, calculations of track coordinates, determination of the lengths of the major and minor axes and determination of the contour of the track opening. Descriptions of the program are given, including the built-in V functions for the two commonly employed nuclear track materials commercially known as LR 115 (cellulose nitrate) and CR-39 (poly allyl diglycol carbonate) irradiated by alpha particles. Program summaryTitle of the program:TRACK_TEST Catalogue identifier:ADWT Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWT Computer:Pentium PC Operating systems:Windows 95+ Programming language:Fortran 90 Memory required to execute with typical data:256 MB No. of lines in distributed program, including test data, etc.: 2739 No. of bytes in distributed program, including test data, etc.:204 526 Distribution format:tar.gz External subprograms used:The entire code must be linked with the MSFLIB library Nature of problem: Fast heavy charged particles (like alpha particles and other light ions etc.) create latent tracks in some dielectric materials. After chemical etching in aqueous NaOH or KOH solutions, these tracks become visible under an optical microscope. The growth of a track is based on the simultaneous actions of the etchant on undamaged regions (with the bulk etch rate V) and along the particle track (with the track etch rate V). Growth of the track is described satisfactorily by these two parameters ( V and V). Several models have been presented in the past describing

  13. Relating results from earthworm toxicity tests to agricultural soil

    USGS Publications Warehouse

    Beyer, W.N.; Greig-Smith, P.W.

    1992-01-01

    The artificial soil tests of the European Economic Community and of the Organization for Economic Cooperation produce data relating earthworm mortality to pesticide concentrations in soil under laboratory conditions. To apply these results to agricultural soils it is necessary to relate these concentrations to amounts of pesticide applied per area. This paper reviews the relevant published literature and suggests a simple relation for regulatory use. Hazards to earthworms from pesticides are suggested to be greatest soon after application, when the pesticides may be concentrated in a soil layer a few millimeters thick. For estimating exposure of earthworms, however, a thicker soil layer should be considered, to account for their movement through soil. During favorable weather conditions, earthworms belonging to species appropriate to the artificial soil test have been reported to confine their activity to a layer about 5 cm. If a 5-cm layer is accepted as relevant for regulatory purposes, then an application of 1 kg/ha would be equivalent to 1-67 ppm (dry) in the artificial soil test.

  14. Approximating Phosphorus Leaching from Agricultural Organic Soils by Soil Testing.

    PubMed

    Zheng, Z M; Zhang, T Q; Kessel, C; Tan, C S; O'Halloran, I P; Wang, Y T; Speranzini, D; Van Eerd, L L

    2015-11-01

    Phosphorus applied to soils in excess of crop requirement could create situations favorable to P enrichment in subsurface flow that contributes to eutrophication of surface water. This pathway of P loss can be more severe in muck (i.e., organic) soils where agricultural production is intensive. This study evaluated the suitability of various environmental and agronomic soil P tests initially designed for mineral soils to predict dissolved reactive P (DRP) in subsurface flow from organic soils. Intact soil columns were collected from 44 muck soils in Ontario to provide a wide range of soil test P levels. A lysimeter leaching study was conducted by evenly adding water in an amount equivalent to 5 mm of rainfall. The leachate DRP concentration was linearly related to soil water-extractable P and CaCl-extractable P with values of 0.90 and 0.93, respectively, and to Bray-1 P and FeO-impregnated filter paper extractable P in a split-line model with a change point. Mehlich-3 P and Olsen P, a method recommended for agronomic P calibration in Ontario, were not related to leachate DRP concentration. All P sorption index (PSI) based degree of P saturation (DPS) values were closely related to leachate DRP in split-line models, with the DPS indices expressed as Bray-1 P/PSI and FeO-P/PSI having the highest correlation with leachate DRP concentration. Because it is desirable from practical and economic standpoints that the environmental risk assessment shares the same soil test with agronomic P calibration, the two PSI-based DPS indices as presented can be considered as environmental risk indicators of DRP subsurface loss from organic soils.

  15. Testing aggregation hypotheses among Neotropical trees and shrubs: results from a 50-ha plot over 20 years of sampling.

    PubMed

    Myster, Randall W; Malahy, Michael P

    2012-09-01

    Spatial patterns of tropical trees and shrubs are important to understanding their interaction and the resultant structure of tropical rainforests. To assess this issue, we took advantage of previously collected data, on Neotropical tree and shrub stem identified to species and mapped for spatial coordinates in a 50ha plot, with a frequency of every five years and over a 20 year period. These stems data were first placed into four groups, regardless of species, depending on their location in the vertical strata of the rainforest (shrubs, understory trees, mid-sized trees, tall trees) and then used to generate aggregation patterns for each sampling year. We found shrubs and understory trees clumped at small spatial scales of a few meters for several of the years sampled. Alternatively, mid-sized trees and tall trees did not clump, nor did they show uniform (regular) patterns, during any sampling period. In general (1) groups found higher in the canopy did not show aggregation on the ground and (2) the spatial patterns of all four groups showed similarity among different sampling years, thereby supporting a "shifting mosaic" view of plant communities over large areas. Spatial analysis, such as this one, are critical to understanding and predicting tree spaces, tree-tree replacements and the Neotropical forest patterns, such as biodiversity and those needed for sustainability efforts, they produce.

  16. NEMAR plotting computer program

    NASA Technical Reports Server (NTRS)

    Myler, T. R.

    1981-01-01

    A FORTRAN coded computer program which generates CalComp plots of trajectory parameters is examined. The trajectory parameters are calculated and placed on a data file by the Near Earth Mission Analysis Routine computer program. The plot program accesses the data file and generates the plots as defined by inputs to the plot program. Program theory, user instructions, output definitions, subroutine descriptions and detailed FORTRAN coding information are included. Although this plot program utilizes a random access data file, a data file of the same type and formatted in 102 numbers per record could be generated by any computer program and used by this plot program.

  17. Faster simulation plots

    NASA Technical Reports Server (NTRS)

    Fowell, Richard A.

    1989-01-01

    Most simulation plots are heavily oversampled. Ignoring unnecessary data points dramatically reduces plot time with imperceptible effect on quality. The technique is suited to most plot devices. The departments laser printer's speed was tripled for large simulation plots by data thinning. This reduced printer delays without the expense of a faster laser printer. Surpisingly, it saved computer time as well. All plot data are now thinned, including PostScript and terminal plots. The problem, solution, and conclusions are described. The thinning algorithm is described and performance studies are presented. To obtain FORTRAN 77 or C source listings, mail a SASE to the author.

  18. Normal probability plots with confidence.

    PubMed

    Chantarangsi, Wanpen; Liu, Wei; Bretz, Frank; Kiatsupaibul, Seksan; Hayter, Anthony J; Wan, Fang

    2015-01-01

    Normal probability plots are widely used as a statistical tool for assessing whether an observed simple random sample is drawn from a normally distributed population. The users, however, have to judge subjectively, if no objective rule is provided, whether the plotted points fall close to a straight line. In this paper, we focus on how a normal probability plot can be augmented by intervals for all the points so that, if the population distribution is normal, then all the points should fall into the corresponding intervals simultaneously with probability 1-α. These simultaneous 1-α probability intervals provide therefore an objective mean to judge whether the plotted points fall close to the straight line: the plotted points fall close to the straight line if and only if all the points fall into the corresponding intervals. The powers of several normal probability plot based (graphical) tests and the most popular nongraphical Anderson-Darling and Shapiro-Wilk tests are compared by simulation. Based on this comparison, recommendations are given in Section 3 on which graphical tests should be used in what circumstances. An example is provided to illustrate the methods.

  19. Career Preparation in Agricultural Resources: A Curriculum Guide for High School Vocational Agriculture. Test Edition.

    ERIC Educational Resources Information Center

    Householder, Larry

    This curriculum guide in agricultural resources is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes eight occupational subgroups: fish, forestry, mining area restoration, outdoor recreation, soil, range, water, and wildlife. It is…

  20. Numerical computation of Pop plot

    SciTech Connect

    Menikoff, Ralph

    2015-03-23

    The Pop plot — distance-of-run to detonation versus initial shock pressure — is a key characterization of shock initiation in a heterogeneous explosive. Reactive burn models for high explosives (HE) must reproduce the experimental Pop plot to have any chance of accurately predicting shock initiation phenomena. This report describes a methodology for automating the computation of a Pop plot for a specific explosive with a given HE model. Illustrative examples of the computation are shown for PBX 9502 with three burn models (SURF, WSD and Forest Fire) utilizing the xRage code, which is the Eulerian ASC hydrocode at LANL. Comparison of the numerical and experimental Pop plot can be the basis for a validation test or as an aid in calibrating the burn rate of an HE model. Issues with calibration are discussed.

  1. Test Item Construction and Validation: Developing a Statewide Assessment for Agricultural Science Education

    ERIC Educational Resources Information Center

    Rivera, Jennifer E.

    2011-01-01

    The State of New York Agriculture Science Education secondary program is required to have a certification exam for students to assess their agriculture science education experience as a Regent's requirement towards graduation. This paper focuses on the procedure used to develop and validate two content sub-test questions within a…

  2. Sequential sentinel SNP Regional Association Plots (SSS-RAP): an approach for testing independence of SNP association signals using meta-analysis data.

    PubMed

    Zheng, Jie; Gaunt, Tom R; Day, Ian N M

    2013-01-01

    Genome-Wide Association Studies (GWAS) frequently incorporate meta-analysis within their framework. However, conditional analysis of individual-level data, which is an established approach for fine mapping of causal sites, is often precluded where only group-level summary data are available for analysis. Here, we present a numerical and graphical approach, "sequential sentinel SNP regional association plot" (SSS-RAP), which estimates regression coefficients (beta) with their standard errors using the meta-analysis summary results directly. Under an additive model, typical for genes with small effect, the effect for a sentinel SNP can be transformed to the predicted effect for a possibly dependent SNP through a 2×2 2-SNP haplotypes table. The approach assumes Hardy-Weinberg equilibrium for test SNPs. SSS-RAP is available as a Web-tool (http://apps.biocompute.org.uk/sssrap/sssrap.cgi). To develop and illustrate SSS-RAP we analyzed lipid and ECG traits data from the British Women's Heart and Health Study (BWHHS), evaluated a meta-analysis for ECG trait and presented several simulations. We compared results with existing approaches such as model selection methods and conditional analysis. Generally findings were consistent. SSS-RAP represents a tool for testing independence of SNP association signals using meta-analysis data, and is also a convenient approach based on biological principles for fine mapping in group level summary data.

  3. IRIS Spectrum Line Plot

    NASA Video Gallery

    This video shows a line plot of the spectrum. The spectra here are shown for various locations on the Sun. The changes in the movie are caused by differing physical conditions in the locations. Cre...

  4. NPLOT - NASTRAN PLOT

    NASA Technical Reports Server (NTRS)

    Mcentire, K.

    1994-01-01

    NPLOT is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models (FEMs). Although there are many commercial codes already available for plotting FEMs, these have limited use due to their cost, speed, and lack of features to view BAR elements. NPLOT was specifically developed to overcome these limitations. On a vector type graphics device the two best ways to show depth are by hidden line plotting or haloed line plotting. A hidden line algorithm generates views of models with all hidden lines removed, and a haloed line algorithm displays views with aft lines broken in order to show depth while keeping the entire model visible. A haloed line algorithm is especially useful for plotting models composed of many line elements and few surface elements. The most important feature of NPLOT is its ability to create both hidden line and haloed line views accurately and much more quickly than with any other existing hidden or haloed line algorithms. NPLOT is also capable of plotting a normal wire frame view to display all lines of a model. NPLOT is able to aid in viewing all elements, but it has special features not generally available for plotting BAR elements. These features include plotting of TRUE LENGTH and NORMALIZED offset vectors and orientation vectors. Standard display operations such as rotation and perspective are possible, but different view planes such as X-Y, Y-Z, and X-Z may also be selected. Another display option is the Z-axis cut which allows a portion of the fore part of the model to be cut away to reveal details of the inside of the model. A zoom function is available to terminals with a locator (graphics cursor, joystick, etc.). The user interface of NPLOT is designed to make the program quick and easy to use. A combination of menus and commands with help menus for detailed information about each command allows experienced users greater speed and efficiency. Once a plot is on the screen the interface

  5. Orbital Plots Using Gnuplot

    NASA Astrophysics Data System (ADS)

    Moore, Brian G.

    2000-06-01

    The plotting program Gnuplot is freely available, general purpose, easy to use, and available on a variety of platforms. Complex three-dimensional surfaces, including the familiar angular parts of the hydrogen atom orbitals, are easily represented using Gnuplot. Contour plots allow viewing the radial and angular variation of the probability density in an orbital. Examples are given of how Gnuplot is used in an undergraduate physical chemistry class to view familiar atomic orbitals in new ways or to generate views of orbital functions that the student may have not seen before. Gnuplot may also be easily integrated into the environment of a Web page; an example of this is discussed (and is available at http://onsager.bd.psu.edu/~moore/orbitals_gnuplot). The plotting commands are entered with a form and a CGI script is used to run Gnuplot and display the result back to the browser.

  6. Carpet plot data format

    NASA Technical Reports Server (NTRS)

    Byrne, J. M.

    1972-01-01

    Analysis and interpretation of data is the crucial phase of the decision making process. The interplay between variables must be considered as to their relative significance upon the final result, and sometimes time-sensitive decisions must be made when actual events deviate from predicted information, such as Apollo 13. As the number of variables increases past say four, the traditional method of cross-plotting tends to break down, and digital/analog results cannot present a sharply defined method of analysis. A graphical system, the carpet plot, is presented in which an unlimited number of complicated relationships of variables can be evaluated.

  7. The Heuristic Interpretation of Box Plots

    ERIC Educational Resources Information Center

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  8. Comparison of agriculture biology and general biology testing outcomes in Utah

    NASA Astrophysics Data System (ADS)

    Despain, Deric Walter

    Agriculture education can take scientific topics to higher levels, emphasize scientific concepts, involve hands-on learning, and develop interrelationships with the other sciences, thus making the living and non-living world around them relevant for students. Prior to 1996, agriculture education was not considered adequate to prepare Utah high school students to meet state biology requirements. The appropriateness of making that equalizing decision in 1996 was not tested until this 2014 study, comparing student test scores on the state biology test for general biology and agriculture biology students. The 2008-2012 data were collected from the Utah Department of Education Data and Statistics, utilizing a descriptive comparative post-test only analysis. As seen in this study, not only did B/AS students tend to score lower than their General Biology counterparts, in multiple cases this difference was significant (p ≤ .05). This contrary finding challenges the theoretical foundation of this study. As a result of this study three implications were made; (a) the Utah CRT-Biology test is not a reliable gauge of academic achievement in agriculture biology, (b) agriculture students in the sample population have not been taught with rigorous biology standards, and (c) biology standards taught in agricultural biology classes are not aligned with content tested by the biology portion of the Utah CRT-Biology test standards. The results of this study indicate to stakeholders that there is a gap occurring within the B/AS education, and the need to reevaluate the biology curriculum delivery to its population may possibly be in need of immediate action.

  9. Air Data - Tile Plot

    EPA Pesticide Factsheets

    This tool plots daily AQI values for a specific location and time period. Each square or “tile” represents one day of the year and is color-coded based on the AQI level for that day. The legend tallies the number of days in each AQI category.

  10. Influence plots for LASSO

    SciTech Connect

    Jang, Dae -Heung; Anderson-Cook, Christine Michaela

    2016-11-22

    With many predictors in regression, fitting the full model can induce multicollinearity problems. Least Absolute Shrinkage and Selection Operation (LASSO) is useful when the effects of many explanatory variables are sparse in a high-dimensional dataset. Influential points can have a disproportionate impact on the estimated values of model parameters. Here, this paper describes a new influence plot that can be used to increase understanding of the contributions of individual observations and the robustness of results. This can serve as a complement to other regression diagnostics techniques in the LASSO regression setting. Using this influence plot, we can find influential points and their impact on shrinkage of model parameters and model selection. Lastly, we provide two examples to illustrate the methods.

  11. Influence plots for LASSO

    DOE PAGES

    Jang, Dae -Heung; Anderson-Cook, Christine Michaela

    2016-11-22

    With many predictors in regression, fitting the full model can induce multicollinearity problems. Least Absolute Shrinkage and Selection Operation (LASSO) is useful when the effects of many explanatory variables are sparse in a high-dimensional dataset. Influential points can have a disproportionate impact on the estimated values of model parameters. Here, this paper describes a new influence plot that can be used to increase understanding of the contributions of individual observations and the robustness of results. This can serve as a complement to other regression diagnostics techniques in the LASSO regression setting. Using this influence plot, we can find influential pointsmore » and their impact on shrinkage of model parameters and model selection. Lastly, we provide two examples to illustrate the methods.« less

  12. corner: Corner plots

    NASA Astrophysics Data System (ADS)

    Foreman-Mackey, Daniel

    2017-02-01

    corner uses matplotlib to visualize multidimensional samples using a scatterplot matrix. In these visualizations, each one- and two-dimensional projection of the sample is plotted to reveal covariances. corner was originally conceived to display the results of Markov Chain Monte Carlo simulations and the defaults are chosen with this application in mind but it can be used for displaying many qualitatively different samples. An earlier version of corner was known as triangle.py.

  13. Innovations in Site Characterization Case Study: Site Cleanup of the Wenatchee Tree Fruit Test Plot Site Using a Dynamic Work Plan

    EPA Pesticide Factsheets

    The Wenatchee Tree Fruit Research and Extension Center site contained soils contaminated with organochlorine pesticides, organophosphorus pesticides, and other pesticides due to agriculture-related research activities conducted from 1966 until...

  14. Development and testing of crop monitoring methods to improve global agricultural monitoring in support of GEOGLAM

    NASA Astrophysics Data System (ADS)

    Gilliams, S. J. B.; Bydekerke, L.

    2014-12-01

    The SIGMA project (Stimulating Innovation for Global Monitoring of Agriculture) is funded through the EC FPY7 Research programme with the particular aim to contribute to the GEOGLAM Research Agenda. It is a partnership of globally distributed expert organizations, focusses on developing innovative techniques and datasets in support of agricultural monitoring and its impact on the environment in support of GEOGLAM. SIGMA has 3 generic objectives which are: (i) develop and test methods to characterize cropland and assess its changes at various scales; (ii) develop and test methods to assess changes in agricultural production levels; and; (iii) study environmental impacts of agriculture. Firstly, multi-scale remote sensing data sets, in combination with field and other ancillary data, are used to generate an improved (global) agro-ecological zoning map and crop mask. Secondly, a combination of agro-meteorological models, satellite-based information and long-term time series are be explored to better assess crop yield gaps and shifts in cultivation. The third research topic entails the development of best practices for assessing the impact of crop land and cropping system change on the environment. In support of the GEO JECAM (Joint Experiment for Crop Assessment and Monitoring) initiative, case studies in Ukraine, Russia, Europe, Africa, Latin America and China are carried out in order to explore possible methodological synergies and particularities according to different cropping systems. This presentation will report on the progress made with respect to the three topics above.

  15. MAC Europe 1991 campaign: AIRSAR/AVIRIS data integration for agricultural test site classification

    NASA Technical Reports Server (NTRS)

    Sangiovanni, S.; Buongiorno, M. F.; Ferrarini, M.; Fiumara, A.

    1993-01-01

    During summer 1991, multi-sensor data were acquired over the Italian test site 'Otrepo Pavese', an agricultural flat area in Northern Italy. This area has been the Telespazio pilot test site for experimental activities related to agriculture applications. The aim of the investigation described in the following paper is to assess the amount of information contained in the AIRSAR (Airborne Synthetic Aperture Radar) and AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) data, and to evaluate classification results obtained from each sensor data separately and from the combined dataset. All classifications are examined by means of the resulting confusion matrices and Khat coefficients. Improvements of the classification results obtained by using the integrated dataset are finally evaluated.

  16. Recurrence plots revisited

    NASA Astrophysics Data System (ADS)

    Casdagli, M. C.

    1997-09-01

    We show that recurrence plots (RPs) give detailed characterizations of time series generated by dynamical systems driven by slowly varying external forces. For deterministic systems we show that RPs of the time series can be used to reconstruct the RP of the driving force if it varies sufficiently slowly. If the driving force is one-dimensional, its functional form can then be inferred up to an invertible coordinate transformation. The same results hold for stochastic systems if the RP of the time series is suitably averaged and transformed. These results are used to investigate the nonlinear prediction of time series generated by dynamical systems driven by slowly varying external forces. We also consider the problem of detecting a small change in the driving force, and propose a surrogate data technique for assessing statistical significance. Numerically simulated time series and a time series of respiration rates recorded from a subject with sleep apnea are used as illustrative examples.

  17. BPMO HISTOS plots

    SciTech Connect

    Clendenin, J.; Williams, S.

    1983-08-23

    Early experience (1981-1982) with jittery position measurements in the CID (Collider Injector Development) and Sector 1 BPM (beam position monitor) system led us to ask whether the source of the observed noise was in the beam or in the BPM electronics. Prior to July, 1983, the signal from each BPM strip was individually processed. It occurred to us that the signal from each strip, when normalized by the sum of the signals from the two adjacent strips, made possible two independent measurements of the beam position in the plane containing the strip. When a single parameter is measured twice, one can look at the correlation of the measurements over a statistical sample of events. This will allow one to distinguish real parameter variations from measurement errors. In this case, a strong correlation in the two measurements from a given strip indicates beam jitter, whereas a lack of correlation indicates either that there is beam jitter in the normalizing plane or that the processing electronics is noisy in at least one channel. The five possible cases are illustrated. These plots are interpreted.

  18. Effects of agricultural conservation practices on oxbow lake watersheds in the Mississippi River alluvial plain

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Globally, agricultural lands are considered to major sources of nonpoint source pollutants such as sediment, pesticides and nutrients in the United States. While conservation practices have been tested for their effectiveness in reducing agricultural related pollutants on test plot scales, they typ...

  19. Career Preparation in Agricultural Products (Food Processing): A Curriculum Guide for High School Vocational Agriculture. Test Edition.

    ERIC Educational Resources Information Center

    Moore, Eddie A.

    This curriculum guide in agricultural products (food processing) is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes three occupational subgroups: meat, fish, poultry; dairy (milk) products; fruits and vegetables. It is meant as an…

  20. Hands-On Activities and Challenge Tests in Agricultural and Environmental Education

    ERIC Educational Resources Information Center

    Poudel, D. D.; Vincent, L. M.; Anzalone, C.; Huner, J.; Wollard, D.; Clement, T.; DeRamus, A.; Blakewood, G.

    2005-01-01

    Many agricultural and environmental problems are interrelated and overlapping. Several agencies, including nonprofit organizations, have developed programs to educate schoolchildren about agricultural and environmental issues; however, programs that integrate both agricultural and environmental learning, especially among middle and high school…

  1. The effect of annealing temperature variation on the optical properties test of LiTaO3 thin films based on Tauc Plot method for satellite technology

    NASA Astrophysics Data System (ADS)

    Djohan, N.; Estrada, R.; Sari, D.; Dahrul, M.; Kurniawan, A.; Iskandar, J.; Hardhienata, H.; Irzaman

    2017-01-01

    The purpose of the present research is to observe the energy gap of thin films made from LiTaO3 in 1 M-solubility deposited on n-type Si (111) substrates with annealing temperature variation. The manufacture of thin films has been formed by Chemical Solution Deposition (CSD) method using spin coater on 3000 rpm speed for 30 seconds and performed annealing process using furnace (Nabertherm type B180) at a temperature of 750°C, 800°C and 850°C for 15 hours. The absorbance of thin films is measured by using an Ocean Optics USB2000 device and processed into the energy gap curve using Tauc Plot method. The result shows that the energy gap of thin films associated with indirect transitions are increased from 2.78 eV to 2.93 eV with the rise of annealing temperature. The research shows that the thin films on n-type Si (111) substrates made of LiTaO3 produces sensitivity to violet light spectrum and have the potential to be developed as a sensor on satellite technology.

  2. GnuForPlot Graphics

    SciTech Connect

    2015-11-04

    Gnuforplot Graphics is a Fortran90 program designed to generate two and three dimensional plots of data on a personal computer. The program uses calls to the open source code Gnuplot to generate the plots. Two Fortran90 programs have been written to use the Gnuplot graphics capabilities. The first program, named Plotsetup.f90 reads data from output files created by either the Stadium or LeachXS/Orchestra modeling codes and saves the data in arrays for plotting. This program then calls Gnuforplot which takes the data array along with user specified parameters to set plot specifications and issues Gnuplot commands that generate the screen plots. The user can view the plots and optionally save copies in jpeg format.

  3. Application of step-drawdown test for planning agricultural groundwater well maintenance in S. Korea

    NASA Astrophysics Data System (ADS)

    Song, Sung-Ho; Lee, Byung-Sun

    2015-04-01

    Well efficiency decreases with time after development and the pumping rate is reduced sharply at a certain point. However, the rapid decrease of the efficiency definitely depends upon the physical characteristics of the aquifer, chemical properties of groundwater, pore clogging by adsorptive/precipitable materials, and use of groundwater well. In general, it is expected that an adequate and ongoing maintenance for the well is effective in extension of operating periods because major maintenance frequency requirement at municipal wells placed in the crystalline rock aquifer is known to be relatively longer. The proportion of agricultural wells (583,748) against the total groundwater ones (1,380,715) is 42.3% in 2011, S. Korea. Groundwater use accounts for 1.9 billion m3/year which indicates 48.9% of total amount available groundwater resources. Approximate 69% of the total agricultural public wells placed in crystalline rock aquifer have passed more than 10 years after development. In this study, the increase of well efficiency before and after the well disinfection/cleaning for agricultural groundwater wells in the mountains, plains, and coastal aquifer with the data of step-drawdown test was evaluated, respectively. With the concept of critical yield, the increase of available amount of groundwater was quantitatively analyzed after treatment. From the results, well efficiency increased approximately 1.5 to 4 times depending on pumping rate when the proper disinfection/cleaning methods to the wells were applied. In addition, it showed that the pumping rate of approximate 4-8% with the critical yield from step-drawdown test increased and these effects were the highest in wells which are more than 10 years elapsed. Therefore, it would be concluded that the well disinfection/cleaning methods for the purpose of increasing the efficiency are more effective for the wells that are older than 10 years.

  4. Design and Testing of an Agricultural Implement for Underground Application of Rodenticide Bait

    PubMed Central

    Malón, Hugo; Aguirre, A. Javier; Boné, Antonio; Vidal, Mariano; García-Ramos, F. Javier

    2015-01-01

    An agricultural implement for underground application of rodenticide bait to control the Mediterranean pocket gopher (Microtus Duodecimcostatus) in fruit orchards has been designed and tested. The main objective of this research was to design and test the implement by using the finite element method (FEM) and considering a range of loads generated on most commonly used furrow openers in agricultural implements. As a second step, the prototype was tested in the field by analysing the effects of forward speed and application depth on the mechanical behaviour of the implement structure. The FEM was used in the design phase and a prototype was manufactured. The structural strains on the prototype chassis under working conditions were tested by using strain gauges to validate the design phase. Three forward speeds (4.5, 5.5, and 7.0 km/h), three application depths (0.12, 0.15, and 0.17 m), and two types of soil (clayey-silty-loam and clayey-silty-sandy) were considered. The prototype was validated successfully by analysing the information obtained from the strain gauges. The Von Mises stresses indicated a safety coefficient of 1.9 for the most critical load case. Although both forward speed and application depth had a significant effect on the stresses generated on the chassis, the latter parameter critically affected the structural behaviour of the implement. The effects of the application depth on the strains were linear such that strains increased with depth. In contrast, strains remained roughly constant regardless of variation in the forward speed. PMID:25602272

  5. Design and testing of an agricultural implement for underground application of rodenticide bait.

    PubMed

    Malón, Hugo; Aguirre, A Javier; Boné, Antonio; Vidal, Mariano; García-Ramos, F Javier

    2015-01-16

    An agricultural implement for underground application of rodenticide bait to control the Mediterranean pocket gopher (Microtus Duodecimcostatus) in fruit orchards has been designed and tested. The main objective of this research was to design and test the implement by using the finite element method (FEM) and considering a range of loads generated on most commonly used furrow openers in agricultural implements. As a second step, the prototype was tested in the field by analysing the effects of forward speed and application depth on the mechanical behaviour of the implement structure. The FEM was used in the design phase and a prototype was manufactured. The structural strains on the prototype chassis under working conditions were tested by using strain gauges to validate the design phase. Three forward speeds (4.5, 5.5, and 7.0 km/h), three application depths (0.12, 0.15, and 0.17 m), and two types of soil (clayey-silty-loam and clayey-silty-sandy) were considered. The prototype was validated successfully by analysing the information obtained from the strain gauges. The Von Mises stresses indicated a safety coefficient of 1.9 for the most critical load case. Although both forward speed and application depth had a significant effect on the stresses generated on the chassis, the latter parameter critically affected the structural behaviour of the implement. The effects of the application depth on the strains were linear such that strains increased with depth. In contrast, strains remained roughly constant regardless of variation in the forward speed.

  6. S2PLOT: Three-dimensional (3D) Plotting Library

    NASA Astrophysics Data System (ADS)

    Barnes, D. G.; Fluke, C. J.; Bourke, P. D.; Parry, O. T.

    2011-03-01

    We present a new, three-dimensional (3D) plotting library with advanced features, and support for standard and enhanced display devices. The library - S2PLOT - is written in C and can be used by C, C++ and FORTRAN programs on GNU/Linux and Apple/OSX systems. S2PLOT draws objects in a 3D (x,y,z) Cartesian space and the user interactively controls how this space is rendered at run time. With a PGPLOT inspired interface, S2PLOT provides astronomers with elegant techniques for displaying and exploring 3D data sets directly from their program code, and the potential to use stereoscopic and dome display devices. The S2PLOT architecture supports dynamic geometry and can be used to plot time-evolving data sets, such as might be produced by simulation codes. In this paper, we introduce S2PLOT to the astronomical community, describe its potential applications, and present some example uses of the library.

  7. PLOT3D user's manual

    NASA Technical Reports Server (NTRS)

    Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

    1990-01-01

    PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

  8. Comparative Notched Box Plots.

    DTIC Science & Technology

    1983-06-01

    provides a 95.1% confidence interval. See Noether (1976, Table E). Furthermore, this notch is not necessarily sym- metric about the sample median as in...distribution of the sign test). ( Noether 1976, Chapter 12; Lehmann 1975, Chapter 4; Hollander and Wolfe 1972, Chapter 3.) Thus, exact rather than approximate...binomial with parameters n and .5, i.e., b(n, .5). We will refer to dx as the notch depth. Noether (1978, Table E) provides the d. values; otherwise, they

  9. The full spectrum of climate change adaptation: testing an analytical framework in Tyrolean mountain agriculture (Austria).

    PubMed

    Grüneis, Heidelinde; Penker, Marianne; Höferl, Karl-Michael

    2016-01-01

    Our scientific view on climate change adaptation (CCA) is unsatisfying in many ways: It is often dominated by a modernistic perspective of planned pro-active adaptation, with a selective focus on measures directly responding to climate change impacts and thus it is far from real-life conditions of those who are actually affected by climate change. Farmers have to simultaneously adapt to multiple changes. Therefore, also empirical climate change adaptation research needs a more integrative perspective on real-life climate change adaptations. This also has to consider "hidden" adaptations, which are not explicitly and directly motivated by CCA but actually contribute to the sector's adaptability to climate change. The aim of the present study is to develop and test an analytic framework that contributes to a broader understanding of CCA and to bridge the gap between scientific expertise and practical action. The framework distinguishes three types of CCA according to their climate related motivations: explicit adaptations, multi-purpose adaptations, and hidden adaptations. Although agriculture is among the sectors that are most affected by climate change, results from the case study of Tyrolean mountain agriculture show that climate change is ranked behind other more pressing "real-life-challenges" such as changing agricultural policies or market conditions. We identified numerous hidden adaptations which make a valuable contribution when dealing with climate change impacts. We conclude that these hidden adaptations have not only to be considered to get an integrative und more realistic view on CCA; they also provide a great opportunity for linking adaptation strategies to farmers' realities.

  10. Near-field testing of the 15-meter model of the hoop column antenna. Volume 3: Near- and far-field plots for the JPL feed

    NASA Technical Reports Server (NTRS)

    Hoover, J.; Kefauver, N.; Cencich, T.; Osborn, J.

    1986-01-01

    Technical results from near-field testing of the 15-meter model of the hoop column antenna at the Martin Marietta Denver Aerospace facility are discussed. The antenna consists of a deployable central column and a 15 meter hoop, stiffened by cables into a structure with a high tolerance repeatable surface and offset feed location. The surface has been configured to have four offset parabolic apertures, each about 6 meters in diameter, and is made of gold plated molybdenum wire mesh. Pattern measurements were made with feed system radiating at frequencies of 7.73, 11.60, 2.27, 2.225, and 4.26 (all in GHz). This report (Volume 3) gives the detailed patterns measured with the JPL feed (2.225 GHz). Volume 1 covers the testing from an overall viewpoint and contains information of generalized interest for testing large antennas, including the deployment of the antenna in the Martin Facility and the measurements to determine mechanical stability and trueness of the reflector surface, the test program outline, and a synopsis of antenna electromagnetic performance. A detailed listing of the antenna patterns for the LaRC feeds (7.3, 11.60, 2.27, and 4.26 GHz) are given in Volume 2 of this report.

  11. Near-field testing of the 15-meter model of the hoop column antenna. Volume 2: Near- and far-field plots for the LaRC feeds

    NASA Technical Reports Server (NTRS)

    Hoover, J.; Kefauver, N.; Cencich, T.; Osborn, J.

    1986-01-01

    The technical results from near-field testing of the 15-meter model of the hoop column antenna at the Martin Marietta Denver Aerospace facility are described. The antenna consists of a deployable central column and a 15-meter hoop, stiffened by cable into a structure with a high tolerance repeatable surface and offset feed location. The surface has been configured to have four offset parabolic apertures, each about 6 meters in diameter, and is made of gold plated molybdenum wire mesh. Pattern measurements were made with feed systems radiating at frequencies of 7.73, 11.60, 2.27, 2.225, and 4.26 (all in GHz). This report (Volume II) gives the detailed patterns measured with the LaRC feeds (7.73, 11.60, 2.27, and 4.26 GHz). Volume I covers the testing from an overall viewpoint and contains information of generalized interest for testing large antennas, including the deployment of the antenna in the Martin Facility and the measurements to determine mechanical stability and trueness of the reflector surface, the test program outline, and a synopsis of antenna electromagnetic performance. A detailed listing of the antenna patterns are provided for the 2.225 Ghz feed in Volume III of this report.

  12. SEGY to ASCII: Conversion and Plotting Program

    USGS Publications Warehouse

    Goldman, Mark R.

    1999-01-01

    This report documents a computer program to convert standard 4 byte, IBM floating point SEGY files to ASCII xyz format. The program then optionally plots the seismic data using the GMT plotting package. The material for this publication is contained in a standard tar file (of99-126.tar) that is uncompressed and 726 K in size. It can be downloaded by any Unix machine. Move the tar file to the directory you wish to use it in, then type 'tar xvf of99-126.tar' The archive files (and diskette) contain a NOTE file, a README file, a version-history file, source code, a makefile for easy compilation, and an ASCII version of the documentation. The archive files (and diskette) also contain example test files, including a typical SEGY file along with the resulting ASCII xyz and postscript files. Requirements for compiling the source code into an executable are a C++ compiler. The program has been successfully compiled using Gnu's g++ version 2.8.1, and use of other compilers may require modifications to the existing source code. The g++ compiler is a free, high quality C++ compiler and may be downloaded from the ftp site: ftp://ftp.gnu.org/gnu Requirements for plotting the seismic data is the existence of the GMT plotting package. The GMT plotting package may be downloaded from the web site: http://www.soest.hawaii.edu/gmt/

  13. A fast hidden line algorithm for plotting finite element models

    NASA Technical Reports Server (NTRS)

    Jones, G. K.

    1982-01-01

    Effective plotting of finite element models requires the use of fast hidden line plot techniques that provide interactive response. A high speed hidden line technique was developed to facilitate the plotting of NASTRAN finite element models. Based on testing using 14 different models, the new hidden line algorithm (JONES-D) appears to be very fast: its speed equals that for normal (all lines visible) plotting and when compared to other existing methods it appears to be substantially faster. It also appears to be very reliable: no plot errors were observed using the new method to plot NASTRAN models. The new algorithm was made part of the NPLOT NASTRAN plot package and was used by structural analysts for normal production tasks.

  14. A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix C: Data base plots for SSME tests 902-214 through 902-314

    NASA Technical Reports Server (NTRS)

    Coffin, T.

    1986-01-01

    A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is reported. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is included to estimate spectral trends with SSME power level. Flow Dynamic Environments in High Performance Rocket Engines are described.

  15. A data base and analysis program for shuttle main engine dynamic pressure measurements. Appendix F: Data base plots for SSME tests 750-120 through 750-200

    NASA Technical Reports Server (NTRS)

    Coffin, T.

    1986-01-01

    A dynamic pressure data base and data base management system developed to characterize the Space Shuttle Main Engine (SSME) dynamic pressure environment is presented. The data base represents dynamic pressure measurements obtained during single engine hot firing tests of the SSME. Software is provided to permit statistical evaluation of selected measurements under specified operating conditions. An interpolation scheme is also included to estimate spectral trends with SSME power level.

  16. Development of an agricultural biotechnology crop product: testing from discovery to commercialization.

    PubMed

    Privalle, Laura S; Chen, Jingwen; Clapper, Gina; Hunst, Penny; Spiegelhalter, Frank; Zhong, Cathy X

    2012-10-17

    "Genetically modified" (GM) or "biotech" crops have been the most rapidly adopted agricultural technology in recent years. The development of a GM crop encompasses trait identification, gene isolation, plant cell transformation, plant regeneration, efficacy evaluation, commercial event identification, safety evaluation, and finally commercial authorization. This is a lengthy, complex, and resource-intensive process. Crops produced through biotechnology are the most highly studied food or food component consumed. Before commercialization, these products are shown to be as safe as conventional crops with respect to feed, food, and the environment. This paper describes this global process and the various analytical tests that must accompany the product during the course of development, throughout its market life, and beyond.

  17. Teachers' Use of Test-Item Banks for Student Assessment in North Carolina Secondary Agricultural Education Programs

    ERIC Educational Resources Information Center

    Marshall, Joy Morgan

    2014-01-01

    Higher expectations are on all parties to ensure students successfully perform on standardized tests. Specifically in North Carolina agriculture classes, students are given a CTE Post Assessment to measure knowledge gained and proficiency. Prior to students taking the CTE Post Assessment, teachers have access to a test item bank system that…

  18. Agricultural use of a flue gas desulfurization by-product

    SciTech Connect

    Dick, W.; Chen, L.; Nelson, S. Jr.

    1998-12-31

    Few, if any, economical alternatives exist for operators of small coal-fired boilers that require a flue-gas desulfurization system which does not generate wastes. A new duct-injection technology called Fluesorbent has been developed to help fill this gap. Fluesorbent FGD was intentionally designed so that the saturated SO{sub 2}-sorbent materials would be valuable soil amendments for agricultural or turf-grass land. Agricultural and turf grass studies recently commenced using spent Fluesorbent materials from an FGD pilot program at an Ohio power plant. In the first year of testing, alfalfa yields on field plots with the FGD by-products were approximately 250% greater than on plots with no treatment, and about 40% greater than on plots treated with an equivalent amount of agricultural lime. Because the FGD by-products contained trace elements from included fly ash, the chemical composition of the alfalfa was significantly improved. Detailed yield and chemical data are presented.

  19. Using Tracer Tests to Estimate Vertical Recharge and Evaluate Influencing Factors for Irrigated Agricultural Systems

    NASA Astrophysics Data System (ADS)

    Lin, D.; Jin, M.; Brusseau, M.; Ma, B.; Liu, Y.

    2013-12-01

    Accurate estimation of vertical groundwater recharge is critical for (semi) arid regions, especially in places such as the North China Plain where vertical recharge comprises the largest portion of recharge. Tracer tests were used to estimate vertical recharge beneath agricultural systems irrigated by groundwater, and to help delineate factors that influence recharge. Bromide solution was applied to trace infiltration in the vadose zone beneath irrigated agricultural fields (rotated winter wheat and summer maize, orchards, and cotton) and non-irrigated woodlands at both piedmont plain (Shijiazhaung) and alluvial and lacustrine plains (Hengshui) in the North China Plain. The tracer tests lasted for more than two years, and were conducted at a total of 37 sites. Tracer solution was injected into the subsurface at a depth of 1.2 m before the rainy season. Soil samples were then collected periodically to observe bromide transport and estimate recharge rates at the point-scale. For these experiments, the only irrigation the fields received was that applied by the landowners. In addition to these tests, a controlled irrigation experiment was conducted at a single wheat and maize site. The results showed that recharge rates were lower for the alluvial and lacustrine plains sites, which comprise finer-textured soils than those present in the piedmont plain. Specifically, the recharge rate ranged between 56-466 mm/a beneath wheat-maize, 110-564 mm/a beneath orchard, and 0-21 mm/a beneath woodlands with an average recharge coefficient of 0.17 for the piedmont plain sites, while the recharge rate ranged between 26-165 mm/a beneath wheat-maize, 6-40 mm/a beneath orchard, 87-319 mm/a beneath cotton, and 0-32 mm/a beneath woodlands with an average recharge coefficient of 0.10 for the alluvial and lacustrine plain sites. Irrigation provided the primary contribution to recharge, with precipitation providing a minor contribution. The results of both the uncontrolled and controlled

  20. 12. Historic plot plan and drawings index for rocket engine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Historic plot plan and drawings index for rocket engine test facility, June 28, 1956. NASA GRC drawing number CE-101810. On file at NASA Glenn Research Center. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

  1. SUPERIMPOSED MESH PLOTTING IN MCNP

    SciTech Connect

    J. HENDRICKS

    2001-02-01

    The capability to plot superimposed meshes has been added to MCNP{trademark}. MCNP4C featured a superimposed mesh weight window generator which enabled users to set up geometries without having to subdivide geometric cells for variance reduction. The variance reduction was performed with weight windows on a rectangular or cylindrical mesh superimposed over the physical geometry. Experience with the new capability was favorable but also indicated that a number of enhancements would be very beneficial, particularly a means of visualizing the mesh and its values. The mathematics for plotting the mesh and its values is described here along with a description of other upgrades.

  2. Teaching the Short Story: Plot

    ERIC Educational Resources Information Center

    Neumeyer, Peter F.

    1975-01-01

    Students are apt to encounter many "plotless" stories--those of Chekhov, Kafka, or Merwin, for example--that the phenomenon of the plotless story must be reckoned with by any teacher. Author attempted to describe how to deal both with the plotted story and the poltless one, to make the transition from one to the other and explain the difference…

  3. Algorithm for Constructing Contour Plots

    NASA Technical Reports Server (NTRS)

    Johnson, W.; Silva, F.

    1984-01-01

    General computer algorithm developed for construction of contour plots. algorithm accepts as input data values at set of points irregularly distributed over plane. Algorithm based on interpolation scheme: points in plane connected by straight-line segments to form set of triangles. Program written in FORTRAN IV.

  4. 29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.53 Protective... effectiveness of the protective system under actual dynamic conditions. This test may be omitted when: (i)...

  5. 29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.52 Protective frames... protective system under actual dynamic conditions. Such testing may be omitted when: (i) The analysis of...

  6. 29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.53 Protective... effectiveness of the protective system under actual dynamic conditions. This test may be omitted when: (i)...

  7. 29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.52 Protective frames... protective system under actual dynamic conditions. Such testing may be omitted when: (i) The analysis of...

  8. 29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.52 Protective frames... protective system under actual dynamic conditions. Such testing may be omitted when: (i) The analysis of...

  9. 29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.52 Protective frames... protective system under actual dynamic conditions. Such testing may be omitted when: (i) The analysis of...

  10. 29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.53 Protective... effectiveness of the protective system under actual dynamic conditions. This test may be omitted when: (i)...

  11. 29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.53 Protective... effectiveness of the protective system under actual dynamic conditions. This test may be omitted when: (i)...

  12. 29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.52 Protective frames... protective system under actual dynamic conditions. Such testing may be omitted when: (i) The analysis of...

  13. 29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Roll-Over Protective Structures § 1928.53 Protective... effectiveness of the protective system under actual dynamic conditions. This test may be omitted when: (i)...

  14. Competency Test Items for Applied Principles of Agribusiness and Natural Resources Occupations. Agricultural Production Component. A Report of Research.

    ERIC Educational Resources Information Center

    Cheek, Jimmy G.; McGhee, Max B.

    An activity was undertaken to develop written criterion-referenced tests for the agricultural production component of Applied Principles of Agribusiness and Natural Resources Occupations. Intended for tenth grade students who have completed Fundamentals of Agribusiness and Natural Resources Occupations, applied principles were designed to consist…

  15. Realtime multi-plot graphics system

    NASA Technical Reports Server (NTRS)

    Shipkowski, Michael S.

    1990-01-01

    The increased complexity of test operations and customer requirements at Langley Research Center's National Transonic Facility (NTF) surpassed the capabilities of the initial realtime graphics system. The analysis of existing hardware and software and the enhancements made to develop a new realtime graphics system are described. The result of this effort is a cost effective system, based on hardware already in place, that support high speed, high resolution, generation and display of multiple realtime plots. The enhanced graphics system (EGS) meets the current and foreseeable future realtime graphics requirements of the NTF. While this system was developed to support wind tunnel operations, the overall design and capability of the system is applicable to other realtime data acquisition systems that have realtime plot requirements.

  16. Testing the Runoff Tool in Sicilian vineyards: adopting best management practices to prevent agricultural surface runoff

    NASA Astrophysics Data System (ADS)

    Singh, Manpriet; Dyson, Jeremy; Capri, Ettore

    2016-04-01

    Over the last decades rainfall has become more intense in Sicily, making large proportions of steeply sloping agricultural land more vulnerable to soil erosion, mainly orchards and vineyards (Diodato and Bellocchi 2010). The prevention of soil degradation is indirectly addressed in the European Union's Water Framework Directive (2000/60/EC) and Sustainable Use Directive (2009/128/EC). As a consequence, new EU compliance conditions for food producers requires them to have tools and solutions for on-farm implementation of sustainable practices (Singh et al. 2014). The Agricultural Runoff and Best Management Practice Tool has been developed by Syngenta to help farm advisers and managers diagnose the runoff potential from fields with visible signs of soil erosion. The tool consists of 4 steps including the assessment of three key landscape factors (slope, topsoil permeability and depth to restrictive horizon) and 9 mainly soil and crop management factors influencing the runoff potential. Based on the runoff potential score (ranging from 0 to 10), which is linked to a runoff potential class, the Runoff Tool uses in-field and edge-of-the-field Best Management Practices (BMPs) to mitigate runoff (aligned with advice from ECPA's TOPPS-prowadis project). The Runoff tool needs testing in different regions and crops to create a number of use scenarios with regional/crop specific advice on BMPs. For this purpose the Tool has been tested in vineyards of the Tasca d'Almerita and Planeta wineries, which are large family-owned estates with long-standing tradition in viticulture in Sicily. In addition to runoff potential scores, Visual Soil Assessment (VSA) scores have been calculated to allow for a comparison between different diagnostic tools. VSA allows for immediate diagnosis of soil quality (a higher score means a better soil quality) including many indicators of runoff (Shepherd 2008). Runoff potentials were moderate to high in all tested fields. Slopes were classified as

  17. Round versus rectangular: Does the plot shape matter?

    NASA Astrophysics Data System (ADS)

    Iserloh, Thomas; Bäthke, Lars; Ries, Johannes B.

    2016-04-01

    Field rainfall simulators are designed to study soil erosion processes and provide urgently needed data for various geomorphological, hydrological and pedological issues. Due to the different conditions and technologies applied, there are several methodological aspects under review of the scientific community, particularly concerning design, procedures and conditions of measurement for infiltration, runoff and soil erosion. Extensive discussions at the Rainfall Simulator Workshop 2011 in Trier and the Splinter Meeting at EGU 2013 "Rainfall simulation: Big steps forward!" lead to the opinion that the rectangular shape is the more suitable plot shape compared to the round plot. A horizontally edging Gerlach trough is installed for sample collection without forming unnatural necks as is found at round or triangle plots. Since most research groups did and currently do work with round plots at the point scale (<1m²), a precise analysis of the differences between the output of round and square plots are necessary. Our hypotheses are: - Round plot shapes disturb surface runoff, unnatural fluvial dynamics for the given plot size such as pool development especially directly at the plot's outlet occur. - A square plot shape prevent these problems. A first comparison between round and rectangular plots (Iserloh et al., 2015) indicates that the rectangular plot could indeed be the more suitable, but the rather ambiguous results make a more elaborate test setup necessary. The laboratory test setup includes the two plot shapes (round, square), a standardised silty substrate and three inclinations (2°, 6°, 12°). The analysis of the laboratory test provide results on the best performance concerning undisturbed surface runoff and soil/water sampling at the plot's outlet. The analysis of the plot shape concerning its influence on runoff and erosion shows that clear methodological standards are necessary in order to make rainfall simulation experiments comparable. Reference

  18. Plotting Lightning-Stroke Data

    NASA Technical Reports Server (NTRS)

    Tatom, F. B.; Garst, R. A.

    1986-01-01

    Data on lightning-stroke locations become easier to correlate with cloudcover maps with aid of new graphical treatment. Geographic region divided by grid into array of cells. Number of lightning strokes in each cell tabulated, and value representing density of lightning strokes assigned to each cell. With contour-plotting routine, computer draws contours of lightning-stroke density for region. Shapes of contours compared directly with shapes of storm cells.

  19. A proteomic Ramachandran plot (PRplot).

    PubMed

    Carugo, Oliviero; Djinović-Carugo, Kristina

    2013-02-01

    Each protein structure can be characterized by the average values of the main chain torsion angles ϕ and ψ and, as a consequence, be plotted on a bidimensional diagram, which resembles the Ramachandran plot. Here, we describe a proteomic ϕ-ψ plot (PRplot) where each protein structure is associated with one point, allowing in this way to represent the entire protein structure universe. It was verified that the PRplot is a robust tool since it does not depend on the dimension of the proteins, on the crystallographic resolution of the structures, nor on the biological source; moreover, it is little affected by disordered and structurally uncharacterized residues. The proteins mapped on the PRplot tend to cluster in three regions that correspond to the structures rich in alpha-helices, in beta-strands, and in both helices and strands, and are distributed along a sigmoidal curve that connect these three highly populated regions. PRplots are a unique instrument to project all protein structures on a single bidimensional plane where the entire structural complexity is reduced to a striking simplicity, with the sigmoid curve clearly delineating the space fraction accessible to a stable protein.

  20. Extended quantification of the generalized recurrence plot

    NASA Astrophysics Data System (ADS)

    Riedl, Maik; Marwan, Norbert; Kurths, Jürgen

    2016-04-01

    The generalized recurrence plot is a modern tool for quantification of complex spatial patterns. Its application spans the analysis of trabecular bone structures, Turing structures, turbulent spatial plankton patterns, and fractals. But, it is also successfully applied to the description of spatio-temporal dynamics and the detection of regime shifts, such as in the complex Ginzburg-Landau- equation. The recurrence plot based determinism is a central measure in this framework quantifying the level of regularities in temporal and spatial structures. We extend this measure for the generalized recurrence plot considering additional operations of symmetry than the simple translation. It is tested not only on two-dimensional regular patterns and noise but also on complex spatial patterns reconstructing the parameter space of the complex Ginzburg-Landau-equation. The extended version of the determinism resulted in values which are consistent to the original recurrence plot approach. Furthermore, the proposed method allows a split of the determinism into parts which based on laminar and non-laminar regions of the two-dimensional pattern of the complex Ginzburg-Landau-equation. A comparison of these parts with a standard method of image classification, the co-occurrence matrix approach, shows differences especially in the description of patterns associated with turbulence. In that case, it seems that the extended version of the determinism allows a distinction of phase turbulence and defect turbulence by means of their spatial patterns. This ability of the proposed method promise new insights in other systems with turbulent dynamics coming from climatology, biology, ecology, and social sciences, for example.

  1. A TIERED APPROACH TO LIFE STAGES TESTING FOR AGRICULTURAL CHEMICAL SAFETY ASSESSMENT

    EPA Science Inventory

    A proposal has been developed by the Agricultural Chemical Safety Assessment (ACSA) Technical Committee of the ILSI Health and Environmental Sciences Institute (HESI) for an improved approach to assessing the safety of crop protection chemicals. The goal is to ensure that studie...

  2. A TIERED APPROACH TO LIFE STAGES TESTING FOR AGRICULTURAL CHEMICAL SAFERY ASSESSMENT

    EPA Science Inventory

    A proposal has been developed by the Agricultural Chemical Safety Assessment (ACSA) Technical Committee of the ILSI Health and Environmental Sciences Institute (HESI) for an improved approach to assessing the safety of crop protection chemicals. The goal is to ensure that studie...

  3. Laboratory tests to assess optimal agricultural residue traits for an abrasive weed control system

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One of the biggest challenges to organic agricultural production and herbicide resistant crops in industrialized countries today is the non-chemical control of weed plants. Studies of new tools and methods for weed control have been motivated by an increased consumer demand for organic produce and c...

  4. Development and testing of method for assessing and mapping agricultural areas susceptible to atrazine leaching in the state of Washington

    USGS Publications Warehouse

    Voss, Frank D.

    2003-01-01

    In a joint effort by the Washington State Department of Agriculture, the Washington Department of Ecology, and the U.S. Geological Survey, the Environmental Protection Agency's Pesticide Root Zone Model and a Geographic Information System were used to develop and test a method for screening and mapping the susceptibility of ground water in agricultural areas to pesticide contamination. The objective was to produce a map that would be used by the Washington State Department of Agriculture to allocate resources for monitoring pesticide levels in ground water. The method was tested by producing a map showing susceptibility to leaching of the pesticide atrazine for the Columbia Basin Irrigation Project, which encompasses an area of intensive agriculture in eastern Washington. The reliability of the atrazine map was assessed by using statistical procedures to determine whether the median of the percentage of atrazine simulated to leach below the root zone in wells where atrazine was detected was statistically greater than the median percentage at wells where atrazine was not detected (at or above 0.001 microgram per liter) in 134 wells sampled by the U.S. Geological Survey. A statistical difference in medians was not found when all 134 wells were compared. However, a statistical difference was found in medians for two subsets of the 134 wells that were used in land-use studies (studies examining the quality of ground water beneath specific crops). The statistical results from wells from the land-use studies indicate that the model potentially can be used to map the relative susceptibility of agricultural areas to atrazine leaching. However, the distinction between areas of high and low susceptibility may not yet be sufficient to use the method for allocating resources to monitor water quality. Several options are offered for improving the reliability of future simulations.

  5. Development of test methods for scale model simulation of aerial applications in the NASA Langley Vortex Research Facility. [agricultural aircraft

    NASA Technical Reports Server (NTRS)

    Jordan, F. L., Jr.

    1980-01-01

    As part of basic research to improve aerial applications technology, methods were developed at the Langley Vortex Research Facility to simulate and measure deposition patterns of aerially-applied sprays and granular materials by means of tests with small-scale models of agricultural aircraft and dynamically-scaled test particles. Interactions between the aircraft wake and the dispersed particles are being studied with the objective of modifying wake characteristics and dispersal techniques to increase swath width, improve deposition pattern uniformity, and minimize drift. The particle scaling analysis, test methods for particle dispersal from the model aircraft, visualization of particle trajectories, and measurement and computer analysis of test deposition patterns are described. An experimental validation of the scaling analysis and test results that indicate improved control of chemical drift by use of winglets are presented to demonstrate test methods.

  6. Techniques for plotting shadow patterns

    SciTech Connect

    Bainbridge, D.A.

    1982-02-01

    Basic approaches for plotting shadow patterns (summer or winter) are discussed, illustrated, and compared. The solar simulator technique uses floodlights or a moveable table to mimic the sun's path over a model of the building being studied. The drawback is that, for large developments, very small models would have to be built. Graphic solutions (2 types) are described in which: (1) sun angles are used to calculate shadow patterns using trigonometry and (2) drawings are made and shadows are calculated. Examples are given for a house on level ground and on sloping ground. Calculations of shade density are also illustrated. 8 references. (MJJ)

  7. The relationship between agricultural intensification and biological control: experimental tests across Europe.

    PubMed

    Thies, Carsten; Haenke, Sebastian; Scherber, Christoph; Bengtsson, Janne; Bommarco, Riccardo; Clement, Lars W; Ceryngier, Piotr; Dennis, Christopher; Emmerson, Mark; Gagic, Vesna; Hawro, Violetta; Liira, Jaan; Weisser, Wolfgang W; Winqvist, Camilla; Tscharntke, Teja

    2011-09-01

    Agricultural intensification can affect biodiversity and related ecosystem services such as biological control, but large-scale experimental evidence is missing. We examined aphid pest populations in cereal fields under experimentally reduced densities of (1) ground-dwelling predators (-G), (2) vegetation-dwelling predators and parasitoids (-V), (3) a combination of (1) and (2) (-G-V), compared with open-fields (control), in contrasting landscapes with low vs. high levels of agricultural intensification (AI), and in five European regions. Aphid populations were 28%, 97%, and 199% higher in -G, -V, and -G-V treatments, respectively, compared to the open fields, indicating synergistic effects of both natural-enemy groups. Enhanced parasitoid: host and predator: prey ratios were related to reduced aphid population density and population growth. The relative importance of parasitoids and vegetation-dwelling predators greatly differed among European regions, and agricultural intensification affected biological control and aphid density only in some regions. This shows a changing role of species group identity in diverse enemy communities and a need to consider region-specific landscape management.

  8. Laboratory Testing of Foundry Sands as Bulking Agents for Porous Media Filters Used to Treat Agricultural Drainage Waters

    NASA Astrophysics Data System (ADS)

    Allred, B. J.

    2008-12-01

    Foundry sands are industrial byproducts that may have potential application as bulking agents that when mixed with small amounts of more chemically reactive materials (i.e. sulfur modified iron, fly ash, etc.) can be used to produce porous media filters capable of removing contaminants from agricultural drainage waters. Foundry sand bulking agents are attractive primarily as a low cost means to maintain the hydraulic efficiency of a filter. Secondarily, the foundry sands themselves may have some capacity for removal of agricultural nutrients and pesticides from water. Consequently, a laboratory study was initiated to quantify hydraulic efficiency and agricultural contaminant removal abilities of six foundry sands. Of the six foundry sands tested, all were obtained in central Ohio, three from iron casting foundries, two from steel casting foundries, and one from an aluminum casting foundry. Hydraulic efficiencies of the foundry sands were assessed by measuring hydraulic conductivity with twice replicated falling-head permeability tests. Batch tests were employed to evaluate foundry sand potential to treat water containing nitrate and phosphate nutrients, along with the pesticide, atrazine. Five of the six foundry sand samples had measured hydraulic conductivity values from 7.6 x 10-3 cm/s to 3.8 x 10-2 cm/s, which is in the range of hydraulic conductivity values found for clean sand. The one foundry sand that was an exception had much lower measured hydraulic conductivity values of 2.75 x 10-5 cm/s and 5.76 x 10-5 cm/s. For the batch tests conducted, none of the nitrate was removed by any of the six foundry sands; however, conversely, almost all of the phosphate was removed by each foundry sand. Batch test atrazine removal results were much more varied. Compared with baseline batch tests, one foundry sand removed two thirds of the atrazine, one foundry sand removed about one half of the atrazine, three foundry sands removed about a third of the atrazine, and one

  9. AEROPLT: A versatile general purpose plot program

    SciTech Connect

    Larson, D.E.; Fuentes, M.K.

    1989-12-01

    AEROPLT is an interactive, user-friendly, general purpose plot code for plotting tabular data from multiple files. This DISSPLA-based code is convenient and easy to use while permitting great flexibility for users who want to customize their plots. A series of questions leads the user through the program and permits a return to specific portions of the code for plot refinement. Multidevice capability permits the user to plot on the terminal, write to a file for hardcopy plots, or do both simultaneously. An easily modified Setup File is used to store the terminal and hardcopy type codes, plot and text dimensions, and default plot specifications. Parameters for individual plots are written to a Restart File which can easily be edited to change subsequent plots. Additional capabilities are: color plots; a convenient method (similar to TEX) to implement all DISSPLA fonts, character sets, and math alphabets; superscripts, subscripts, underline, and italicize; and plots of the results of mathematical functions of the input data. 12 figs., 21 tabs.

  10. Program Manipulates Plots For Effective Display

    NASA Technical Reports Server (NTRS)

    Bauer, F.; Downing, J.

    1990-01-01

    Windowed Observation of Relative Motion (WORM) computer program primarily intended for generation of simple X-Y plots from data created by other programs. Enables user to label, zoom, and change scales of various plots. Three-dimensional contour and line plots provided. Written in PASCAL.

  11. Chromatographic properties PLOT multicapillary columns.

    PubMed

    Nikolaeva, O A; Patrushev, Y V; Sidelnikov, V N

    2017-03-10

    Multicapillary columns (MCCs) for gas chromatography make it possible to perform high-speed analysis of the mixtures of gaseous and volatile substances at a relatively large amount of the loaded sample. The study was performed using PLOT MCCs for gas-solid chromatography (GSC) with different stationary phases (SP) based on alumina, silica and poly-(1-trimethylsilyl-1-propyne) (PTMSP) polymer as well as porous polymers divinylbenzene-styrene (DVB-St), divinylbenzene-vinylimidazole (DVB-VIm) and divinylbenzene-ethylene glycol dimethacrylate (DVB-EGD). These MCCs have the efficiency of 4000-10000 theoretical plates per meter (TP/m) and at a column length of 25-30cm can separate within 10-20s multicomponent mixtures of substances belonging to different classes of chemical compounds. The sample amount not overloading the column is 0.03-1μg and depends on the features of a porous layer. Examples of separations on some of the studied columns are considered.

  12. Operation of agricultural test fields for study of stressed crops by remote sensing

    NASA Technical Reports Server (NTRS)

    Toler, R. W.

    1974-01-01

    A test site for the study of winter wheat development and collection of ERTS data was established in September of 1973. The test site is a 10 mile square area located 12.5 miles west of Amarillo, Texas on Interstate Hwy. 40, in Randall and Potter counties. The center of the area is the Southwestern Great Plains Research Center at Bushland, Texas. Within the test area all wheat fields were identified by ground truth and designated irrigated or dryland. The fields in the test area other than wheat were identified as to pasture or the crop that was grown. A ground truth area of hard red winter wheat was established west of Hale Center, Texas. Maps showing the location of winter wheat fields in excess of 40 acres in size within a 10 mile radius were supplied NASA. Satellite data was collected for this test site (ERTS-1).

  13. Multi-frequency and polarimetric radar backscatter signatures for discrimination between agricultural crops at the Flevoland experimental test site

    NASA Technical Reports Server (NTRS)

    Freeman, A.; Villasenor, J.; Klein, J. D.

    1991-01-01

    We describe the calibration and analysis of multi-frequency, multi-polarization radar backscatter signatures over an agriculture test site in the Netherlands. The calibration procedure involved two stages: in the first stage, polarimetric and radiometric calibrations (ignoring noise) were carried out using square-base trihedral corner reflector signatures and some properties of the clutter background. In the second stage, a novel algorithm was used to estimate the noise level in the polarimetric data channels by using the measured signature of an idealized rough surface with Bragg scattering (the ocean in this case). This estimated noise level was then used to correct the measured backscatter signatures from the agriculture fields. We examine the significance of several key parameters extracted from the calibrated and noise-corrected backscatter signatures. The significance is assessed in terms of the ability to uniquely separate among classes from 13 different backscatter types selected from the test site data, including eleven different crops, one forest and one ocean area. Using the parameters with the highest separation for a given class, we use a hierarchical algorithm to classify the entire image. We find that many classes, including ocean, forest, potato, and beet, can be identified with high reliability, while the classes for which no single parameter exhibits sufficient separation have higher rates of misclassification. We expect that modified decision criteria involving simultaneous consideration of several parameters increase performance for these classes.

  14. Vector plotting as an indication of the approach to flutter

    NASA Technical Reports Server (NTRS)

    Broadbent, E. G.

    1975-01-01

    A binary flexure-torsion analysis was made to check theoretically a method for predicting flutter which depends on plotting vectorially the amplitudes of response relative to the exciting force and extracting the relevant damping rate. The results of this calculation are given in graphs both of the vector plots themselves and of the estimated damping rate against forward speed. The estimated damping rates are compared with calculated values. The method has the advantage that in a flight flutter test damping can be estimated from continuous excitation records: the method is an extension of the Kennedy and Pancu technique used in ground resonance testing.

  15. PlotData v. 4.47

    SciTech Connect

    Wackerbarth, David

    2016-06-23

    Sandia National Laboratories has developed a computer program to review, reduce and manipulate waveform data. PlotData is designed for post-acquisition waveform data analysis. PlotData is both a post-acquisition and an advanced interactive data analysis environment. PlotData requires unidirectional waveform data with both uniform and discrete time-series measurements. PlotData operates on a National Instruments' LabVIEW™ software platform. Using PlotData, the user can capture waveform data from digitizing oscilloscopes over a GPIB, USB and Ethernet interface from Tektronix, Lecroy or Agilent scopes. PlotData can both import and export several types of binary waveform files including, but not limited to, Tektronix .wmf files, Lecroy.trc files and xy pair ASCIIfiles. Waveform manipulation includes numerous math functions, integration, differentiation, smoothing, truncation, and other specialized data reduction routines such as VISAR, POV, PVDF (Bauer) piezoelectric gauges, and piezoresistive gauges such as carbon manganin pressure gauges.

  16. Adding stress plot function to NASTRAN

    NASA Technical Reports Server (NTRS)

    Katoh, S.

    1978-01-01

    Stress plot function was developed and added to the NASTRAN level 15.5. Computed stress distribution can be displayed by this function, with vectors showing the principal stresses of the finite elements over the specified portions of the structure. NASTRAN is reviewed in the aspect of plotting capabilities. Stress tensor field is examined in preparation of stress display. Then the stress plot function as added to the NASTRAN is described. A sample plotout by this function is shown.

  17. An Excel macro for generating trilinear plots.

    PubMed

    Shikaze, Steven G; Crowe, Allan S

    2007-01-01

    This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

  18. Portable FORTRAN contour-plotting subprogram

    SciTech Connect

    Haskell, K.H.

    1983-07-01

    In this report we discuss a contour plotting Fortran subprogram. While contour plotting subroutines are available in many commercial plotting packages, this routine has the following advantages: (1) since it uses the Weasel and VDI plot routines developed at Sandia, it occupies little storage and can be used on most of the Sandia time-sharing systems as part of a larger program. In the past, the size of plotting packages often forced a user to perform plotting operations in a completely separate program; (2) the contour computation algorithm is efficient and robust, and computes accurate contours for sets of data with low resolution; and (3) the subprogram is easy to use. A simple contour plot can be produced with a minimum of information provided by a user in one Fortran subroutine call. Through the use of a wide variety of subroutine options, many additional features can be used. These include such items as plot titles, grid lines, placement of text on the page, etc. The subroutine is written in portable Fortran 77, and is designed to run on any system which supports the Weasel and VDI plot packages. It also uses routines from the SLATEC mathematical subroutine library.

  19. Proposed modification to avoidance test with Eisenia fetida to assess metal toxicity in agricultural soils affected by mining activities.

    PubMed

    Delgadillo, Víctor; Verdejo, José; Mondaca, Pedro; Verdugo, Gabriela; Gaete, Hernán; Hodson, Mark E; Neaman, Alexander

    2017-06-01

    Use of avoidance tests is a quick and cost-effective method of assessing contaminants in soils. One option for assessing earthworm avoidance behavior is a two-section test, which consists of earthworms being given the choice to move between a test soil and a control substrate. For ecological relevance, tested soils should be field-contaminated soils. For practical reasons, artificial soils are commonly used as the control substrate. Interpretation of the test results compromised when the test soil and the artificial substrate differ in their physico-chemical properties other than just contaminants. In this study we identified the physico-chemical properties that influence avoidance response and evaluated the usefulness of adjusting these in the control substrate in order to isolate metal-driven avoidance of field soils by earthworms. A standardized two-section avoidance test with Eisenia fetida was performed on 52 uncontaminated and contaminated (Cu >155mgkg(-1), As >19mgkg(-1)) agricultural soils from the Aconcagua River basin and the Puchuncaví Valley in Chile. Regression analysis indicated that the avoidance response was determined by soil organic matter (OM), electrical conductivity (EC) and total soil Cu. Organic matter content of the artificial substrate was altered by peat additions and EC by NaCl so that these properties matched those of the field soils. The resultant EC80 for avoidance (indicative of soils of "limited habitat") was 433mg Cu kg(-1) (339 - 528mgkg(-1) 95% confidence intervals). The earthworm avoidance test can be used to assess metal toxicity in field-contaminated soils by adjusting physico-chemical properties (OM and EC) of the artificial control substrate in order to mimic those of the field-collected soil.

  20. Performance Objectives, Task Analysis, Learning Content, Content Limits, and Domain Referenced Tests for the Agricultural Chemicals Catalog. Final Report.

    ERIC Educational Resources Information Center

    Hamilton, William; And Others

    This document contains Indiana agricultural chemicals curriculum materials based on the Vocational-Technical Education Consortium of States (VTECS) Agricultural Chemicals Catalog. It is intended to improve preparation of high school and adult students for handling and using agricultural chemicals and for jobs as chemical salespersons or chemical…

  1. 7 CFR 205.670 - Inspection and testing of agricultural product to be sold or labeled “organic.”

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM... or food group(s))” must be made accessible by certified organic production or handling operations for... agricultural product to be sold or labeled “organic.” (a) All agricultural products that are to be...

  2. 7 CFR 205.670 - Inspection and testing of agricultural product to be sold or labeled “organic.”

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM... or food group(s))” must be made accessible by certified organic production or handling operations for... agricultural product to be sold or labeled “organic.” (a) All agricultural products that are to be...

  3. 7 CFR 205.670 - Inspection and testing of agricultural product to be sold or labeled “organic.”

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM... or food group(s))” must be made accessible by certified organic production or handling operations for... agricultural product to be sold or labeled “organic.” (a) All agricultural products that are to be...

  4. Interactive Visualizations of Plot in Fiction

    ERIC Educational Resources Information Center

    Dobson, Teresa; Michura, Piotr; Ruecker, Stan; Brown, Monica; Rodriguez, Omar

    2011-01-01

    In this paper, we expand on our presentation at ICDS2010 (Dobson et al., 2010) in describing the design of several new forms of interactive visualization intended for teaching the concept of plot in fiction. The most common visualization currently used for teaching plot is a static diagram known as Freytag's Pyramid, which was initially intended…

  5. Reaction Order Ambiguity in Integrated Rate Plots

    ERIC Educational Resources Information Center

    Lee, Joe

    2008-01-01

    Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

  6. Box Plots in the Australian Curriculum

    ERIC Educational Resources Information Center

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

  7. IET area plot and utilities plan. Includes drainage. Ralph M. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    IET area plot and utilities plan. Includes drainage. Ralph M. Parsons 902-4-ANP-U-310. Date: February 1954. Approved by INEEL Classification Office for public release. INEEL code no. 035-0100-00-693-106898 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  8. Narrow grass hedges reduce tylosin and associated antimicrobial resistance genes in agricultural runoff.

    PubMed

    Soni, Bhavneet; Bartelt-Hunt, Shannon L; Snow, Daniel D; Gilley, John E; Woodbury, Bryan L; Marx, David B; Li, Xu

    2015-05-01

    Agricultural runoff from areas receiving livestock manure can potentially contaminate surface water with antimicrobials and antimicrobial resistance genes (ARGs). The objective of this study was to investigate the effectiveness of narrow grass hedges (NGHs) on reducing the transport of antimicrobials and ARGs in runoff after land application of swine manure slurry. Plot-scale rainfall simulation tests were conducted on 0.75 m by 4.0 m plots designed to test three treatment factors: manure amendment (control plots receiving no manure vs. amended plots receiving manure based on 3 times N requirement), NGH (plots with a NGH vs. plots without a NGH), and rainfall events (days 1-3). Runoff generated during three 30-min simulated rainfall events was sampled and analyzed for antimicrobials and ARGs. Manure amendment was responsible for the presence of antimicrobial tylosin ( < 0.0001) and tylosin resistance gene (B) ( < 0.0001) in runoff. Narrow grass hedges proved to be effective in reducing tylosin ( < 0.0001) and (B) ( < 0.0347) in runoff. Manure amendment was responsible for the introduction of tylosin ( < 0.0482) and (B) ( = 0.0128) into the soil; however, it had no significant impact on the abundance of the 16S rRNA gene in soil. Results from this study suggest that NGHs could be a best management practice to control the transport of antimicrobials and ARGs in agricultural runoff.

  9. Use of a mesoplot rainfall simulator to characterize the hydrological behaviour of runoff plots under two different soil management techniques.

    NASA Astrophysics Data System (ADS)

    Martinez, Roberto; Giráldez, Juan V.; Gómez, Jose A.

    2010-05-01

    This communication describes a mobile rainfall simulator for mesoplot studies, the calibration tests required for its development, and its performance for evaluating runoff and sediment losses in an experiment on an olive grove under two different soil management methods. The rainfall simulator is based on commercial sprinkles overlapping an effective area for rainfall simulation experiments of 8 x 18 m. It uses a portable power generator, water pumps and five water tanks (of 3000 l each). It is inspired in the design of Sumner et al. 1996. The whole equipment fits into a 700 kg trailer and can be served by a team of three people. In areas without water supply water can be transported in trucks or tractors and stored into the tanks. The calibration tests indicated that the rainfall simulator can provide rainfall intensities from 15 to 35 mm h-1, depending on the number of nozzles used and the water pressure. Calibration tests indicated that it provided acceptable uniformity, an average value of the Christiansen Coefficient of Uniformity (Christiansen, 1942) of 85%, when used under wind velocities below 1 m second-1. Above this wind velocity the rainfall simulator should be used in combination with wind screens. This is not always a feasible option, as in the experiments performed in rainfall orchards where the sprinklers had to be located 3 m high to be above the olive tree canopies. In an olive orchards located in Pedrera, Southern Spain, two runoff plots under different soil management methods were selected for testing the rainfall simulator in the field. The two soil management methods evaluated were conventional tillage and a cover crop of ray grass sown in fall and chemically killed with herbicides in late March. These plots had been established five years before the rainfall simulation experiment. Three rainfall simulations were made on each of the two runoff plots. The rainfall intensity used was always 33 m h-1, and lasted 60, 60 and 45 minutes for the

  10. Automatic Target Recognition Based on Cross-Plot

    PubMed Central

    Wong, Kelvin Kian Loong; Abbott, Derek

    2011-01-01

    Automatic target recognition that relies on rapid feature extraction of real-time target from photo-realistic imaging will enable efficient identification of target patterns. To achieve this objective, Cross-plots of binary patterns are explored as potential signatures for the observed target by high-speed capture of the crucial spatial features using minimal computational resources. Target recognition was implemented based on the proposed pattern recognition concept and tested rigorously for its precision and recall performance. We conclude that Cross-plotting is able to produce a digital fingerprint of a target that correlates efficiently and effectively to signatures of patterns having its identity in a target repository. PMID:21980508

  11. Nonlinear analysis of bivariate data with cross recurrence plots

    NASA Astrophysics Data System (ADS)

    Marwan, Norbert; Kurths, Jürgen

    2002-09-01

    We use the extension of the method of recurrence plots to cross recurrence plots (CRP) which enables a nonlinear analysis of bivariate data. To quantify CRPs, we develop further three measures of complexity mainly basing on diagonal structures in CRPs. The CRP analysis of prototypical model systems with nonlinear interactions demonstrates that this technique enables to find these nonlinear interrelations from bivariate time series, whereas linear correlation tests do not. Applying the CRP analysis to climatological data, we find a complex relationship between rainfall and El Niño data.

  12. Automatic target recognition based on cross-plot.

    PubMed

    Wong, Kelvin Kian Loong; Abbott, Derek

    2011-01-01

    Automatic target recognition that relies on rapid feature extraction of real-time target from photo-realistic imaging will enable efficient identification of target patterns. To achieve this objective, Cross-plots of binary patterns are explored as potential signatures for the observed target by high-speed capture of the crucial spatial features using minimal computational resources. Target recognition was implemented based on the proposed pattern recognition concept and tested rigorously for its precision and recall performance. We conclude that Cross-plotting is able to produce a digital fingerprint of a target that correlates efficiently and effectively to signatures of patterns having its identity in a target repository.

  13. Testing the Need for Replication of Eddy Covariance Carbon Dioxide Flux Measurements over Agricultural Fields

    NASA Astrophysics Data System (ADS)

    Taylor, A. M.; Amiro, B. D.; Gervais, M.

    2015-12-01

    The eddy covariance method directly measures carbon dioxide (CO2) fluxes for long periods of time and with footprints up to hundreds of meters in size. Any ecosystem process that alters how gases and energy move between the atmosphere and soil/vegetation can affect these fluxes. Eddy covariance is vulnerable to systematic errors and uncertainy, particular through relying on assumptions about surface characteristics. Additionally, spatial variation within a site can cause more uncertainty in these measurements and lack of replication in many eddy covariance studies makes statistical analysis of carbon fluxes challenging. We tested if there are significant differences between co-located and simultaneous CO2 flux measurements over a uniform crop surface, and if the differences increase if we measure different flux footprint areas over the same field. During the summer of 2014, three matched instrumented 2.5-m high towers were co-located and then periodically separated by moving at 50 m intervals along a north-south transect on an alfalfa/trefoil field and a spring wheat field in Southern Manitoba, Canada to compare CO­2 fluxes. Georeferenced leaf area index measurements were taken in 50 m grid of each field to establish uniformity of the source/sink within a footprint. Diurnal differences of similar magnitude in the CO2 ­fluxes were found in both the co-located experiment and the spatially separated intervals. Despite rigorous calibration during the experiment, some differences were caused by the measurement systems rather than by variation within the field. Interpretation of the spatial variation in leaf area index is being used to determine the contribution caused by difference in source/sink contributions to the flux footprint areas when the towers were spatially separated.

  14. Testing the effect of a science-enhanced curriculum on the science achievement and agricultural competency of secondary agricultural education students

    NASA Astrophysics Data System (ADS)

    Haynes, James Christopher

    Scope and Method of Study. The purpose of this study was to determine if a science-enhanced curriculum produced by the Center for Agricultural and Environmental Research and Training (CAERT) taught in a secondary level animal science or horticulture course would improve students' understanding of selected scientific principles significantly, when compared to students who were instructed using a traditional curriculum. A secondary purpose was to determine the effect that the science-enhanced CAERT curriculum would have on students' agricultural knowledge when compared to students who were instructed using a traditional curriculum. The design of the study was ex post facto, causal comparative because no random assignment of the treatment group occurred. Findings and Conclusions. No statistically significant difference was found between the treatment and comparison groups regarding science achievement. However, the mean score of the treatment group was slightly larger than the comparison group indicating a slightly higher achievement level; a "Small" effect size (d = .16) for this difference was calculated. It was determined that a statistically significant difference (p < .05) existed in agriculture competency scores in animal science (p = .001) and horticulture (p = .000) as a result of the treatment. Moreover, this was considered to be a "very large" effect (d = 1.18) in animal science and a "large" effect (d = .92) in horticulture. When considering student achievement in science, this study found that the use of the science-enhanced CAERT curriculum did not result in a statistically significant increase (p < .05) in student performance as determined by the TerraNova3 science proficiency examination. However, students who were instructed using the CAERT curriculum scored better overall than those who were instructed using a "traditional" curriculum.

  15. Biomonitoring of agricultural workers exposed to pesticide mixtures in Guerrero state, Mexico, with comet assay and micronucleus test.

    PubMed

    Carbajal-López, Yolanda; Gómez-Arroyo, Sandra; Villalobos-Pietrini, Rafael; Calderón-Segura, María Elena; Martínez-Arroyo, Amparo

    2016-02-01

    The aim of this study was to evaluate the genotoxic effect of pesticides in exfoliated buccal cells of workers occupationally exposed in Guerrero, Mexico, using the comet assay and the micronucleus test. The study compared 111 agricultural workers in three rural communities (Arcelia 62, Ajuchitlan 13, and Tlapehuala 36), with 60 non-exposed individuals. All the participants were males. The presence of DNA damage was investigated in the exfoliated buccal cells of study participants with the comet assay and the micronucleus (MN) test; comet tail length was evaluated in 100 nuclei and 3000 epithelial cells of each individual, respectively; other nuclear anomalies such as nuclear buds, karyolysis, karyorrhexis, and binucleate cells were also evaluated. Study results revealed that the tail migration of DNA and the frequency of MN increased significantly in the exposed group, which also showed nuclear anomalies associated with cytotoxic or genotoxic effect. No positive correlation was noted between exposure time and tail length and micronuclei frequencies. No significant effect on genetic damage was observed as a result of age, smoking, and alcohol consumption. The MN and comet assay in exfoliated buccal cells are useful and minimally invasive methods for monitoring genetic damage in individuals exposed to pesticides. This study provided valuable data for establishing the possible risk to human health associated with pesticide exposure.

  16. Oblique orthographic projections and contour plots

    NASA Technical Reports Server (NTRS)

    Giles, G. L.

    1977-01-01

    Oblique orthographic projections allow model to be viewed in any selected orientation specified by Euler-angle transformation. This transformation resolves coordinate system of model to principal plane on which display is to be plotted.

  17. Experimental Garden Plots for Botany Lessons

    ERIC Educational Resources Information Center

    Gorodnicheva, V. V.; Vasil'eva, E. I.

    1976-01-01

    Discussion of the botany lessons used at two schools points out the need for fifth and sixth grade students to be taught the principles of plant life through observations made at an experimental garden plot at the school. (ND)

  18. Pippi: Parse and plot MCMC chains

    NASA Astrophysics Data System (ADS)

    Scott, Pat

    2016-11-01

    Pippi (parse it, plot it) operates on MCMC chains and related lists of samples from a function or distribution, and can merge, parse, and plot sample ensembles ('chains') either in terms of the likelihood/fitness function directly, or as implied posterior probability densities. Pippi is compatible with ASCII text and hdf5 chains, operates out of core, and can post-process chains on the fly.

  19. A threshold area ratio of organic to conventional agriculture causes recurrent pathogen outbreaks in organic agriculture.

    PubMed

    Adl, S; Iron, D; Kolokolnikov, T

    2011-05-01

    Conventional agriculture uses herbicides, pesticides, and chemical fertilizers that have the potential to pollute the surrounding land, air and water. Organic agriculture tries to avoid using these and promotes an environmentally friendly approach to agriculture. Instead of relying on herbicides, pesticides and chemical fertilizers, organic agriculture promotes a whole system approach to managing weeds, pests and nutrients, while regulating permitted amendments. In this paper, we consider the effect of increasing the total area of agricultural land under organic practices, against a background of conventional agriculture. We hypothesized that at a regional scale, organic agriculture plots benefit from existing in a background of conventional agriculture, that maintains low levels of pathogens through pesticide applications. We model pathogen dispersal with a diffusive logistic equation in which the growth/death rate is spatially heterogeneous. We find that if the ratio of the organic plots to conventional plots remains below a certain threshold l(c), the pest population is kept small. Above this threshold, the pest population in the organic plots grows rapidly. In this case, the area in organic agriculture will act as a source of pest to the surrounding region, and will always infect organic plots as they become more closely spaced. Repeated localized epidemics of pest outbreaks threaten global food security by reducing crop yields and increasing price volatility. We recommend that regional estimates of this threshold are necessary to manage the growth of organic agriculture region by region.

  20. Plotting equation for gaussian percentiles and a spreadsheet program for generating probability plots

    USGS Publications Warehouse

    Balsillie, J.H.; Donoghue, J.F.; Butler, K.M.; Koch, J.L.

    2002-01-01

    Two-dimensional plotting tools can be of invaluable assistance in analytical scientific pursuits, and have been widely used in the analysis and interpretation of sedimentologic data. We consider, in this work, the use of arithmetic probability paper (APP). Most statistical computer applications do not allow for the generation of APP plots, because of apparent intractable nonlinearity of the percentile (or probability) axis of the plot. We have solved this problem by identifying an equation(s) for determining plotting positions of Gaussian percentiles (or probabilities), so that APP plots can easily be computer generated. An EXCEL example is presented, and a programmed, simple-to-use EXCEL application template is hereby made publicly available, whereby a complete granulometric analysis including data listing, moment measure calculations, and frequency and cumulative APP plots, is automatically produced.

  1. Subclassifying disordered proteins by the CH-CDF plot method.

    PubMed

    Huang, Fei; Oldfield, Christopher; Meng, Jingwei; Hsu, Wei-Lun; Xue, Bin; Uversky, Vladimir N; Romero, Pedro; Dunker, A Keith

    2012-01-01

    Intrinsically disordered proteins (IDPs) are associated with a wide range of functions. We suggest that sequence-based subtypes, which we call flavors, may provide the basis for different biological functions. The problem is to find a method that separates IDPs into different flavor / function groups. Here we discuss one approach, the (Charge-Hydropathy) versus (Cumulative Distribution Function) plot or CH-CDF plot, which is based the combined use of the CH and CDF disorder predictors. These two predictors are based on significantly different inputs and methods. This CH-CDF plot partitions all proteins into 4 groups: structured, mixed, disordered, and rare. Studies of the Protein Data Bank (PDB) entries and homologous show different structural biases for each group classified by the CH-CDF plot. The mixed class has more order-promoting residues and more ordered regions than the disordered class. To test whether this partition accomplishes any functional separation, we performed gene ontology (GO) term analysis on each class. Some functions are indeed found to be related to subtypes of disorder: the disordered class is highly active in mitosis-related processes among others. Meanwhile, the mixed class is highly associated with signaling pathways, where having both ordered and disordered regions could possibly be important.

  2. Model-independent plot of dynamic PET data facilitates data interpretation and model selection.

    PubMed

    Munk, Ole Lajord

    2012-02-21

    When testing new PET radiotracers or new applications of existing tracers, the blood-tissue exchange and the metabolism need to be examined. However, conventional plots of measured time-activity curves from dynamic PET do not reveal the inherent kinetic information. A novel model-independent volume-influx plot (vi-plot) was developed and validated. The new vi-plot shows the time course of the instantaneous distribution volume and the instantaneous influx rate. The vi-plot visualises physiological information that facilitates model selection and it reveals when a quasi-steady state is reached, which is a prerequisite for the use of the graphical analyses by Logan and Gjedde-Patlak. Both axes of the vi-plot have direct physiological interpretation, and the plot shows kinetic parameter in close agreement with estimates obtained by non-linear kinetic modelling. The vi-plot is equally useful for analyses of PET data based on a plasma input function or a reference region input function. The vi-plot is a model-independent and informative plot for data exploration that facilitates the selection of an appropriate method for data analysis.

  3. Loran-C plotting program for plotting lines of position on standard charts

    NASA Technical Reports Server (NTRS)

    Roman, J. P.

    1982-01-01

    A set of programs designed to be run on the IBM System/370 computer is described. These programs are used to plot Loran-C lines of position (LOP) on any common map or standard aviation sectional chart. The Loran-C plotting program JRPLOT FORTRAN uses a standard Calcomp-compatible plotting subroutine package for the Hewlett-Packard 7203A graphic plotter. A general description of the features of the Loran-C plotting program. This program involves a simple add/substrate method to calculate the LOP. A description on how to use the program and some methods of operation are included.

  4. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Revision of plot plans, blueprints, and legends. 108.6 Section 108.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND...

  5. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Revision of plot plans, blueprints, and legends. 108.6 Section 108.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND...

  6. 9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Filing of plot plans, blueprints, and legends. 108.7 Section 108.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  7. 9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Filing of plot plans, blueprints, and legends. 108.7 Section 108.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  8. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Revision of plot plans, blueprints, and legends. 108.6 Section 108.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND...

  9. 9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Filing of plot plans, blueprints, and legends. 108.7 Section 108.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  10. Success and challenges met during the calibration of APEX on large plots

    Technology Transfer Automated Retrieval System (TEKTRAN)

    As the APEX model is increasingly considered for the evaluation of agricultural systems, satisfactory performance of APEX on fields is critical. APEX was applied to 16 replicated large plots established in 1991 in Northeast Missouri. Until 2009, each phase of each rotation was represented every year...

  11. 9 CFR 108.2 - Plot plans, blueprints, and legends required.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Plot plans, blueprints, and legends required. 108.2 Section 108.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  12. 9 CFR 108.2 - Plot plans, blueprints, and legends required.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Plot plans, blueprints, and legends required. 108.2 Section 108.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  13. 9 CFR 108.2 - Plot plans, blueprints, and legends required.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Plot plans, blueprints, and legends required. 108.2 Section 108.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS...

  14. BOREAS TE-23 Map Plot Data

    NASA Technical Reports Server (NTRS)

    Rich, Paul M.; Fournier, Robert; Hall, Forrest G. (Editor); Papagno, Andrea (Editor)

    2000-01-01

    The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-23 (Terrestrial Ecology) team collected map plot data in support of its efforts to characterize and interpret information on canopy architecture and understory cover at the BOREAS tower flux sites and selected auxiliary sites from May to August 1994. Mapped plots (typical dimensions 50 m x 60 m) were set up and characterized at all BOREAS forested tower flux and selected auxiliary sites. Detailed measurement of the mapped plots included: (1) stand characteristics (location, density, basal area); (2) map locations diameter at breast height (DBH) of all trees; (3) detailed geometric measures of a subset of trees (height, crown dimensions); and (4) understory cover maps. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  15. Increasing biomass in Amazonian forest plots.

    PubMed Central

    Baker, Timothy R; Phillips, Oliver L; Malhi, Yadvinder; Almeida, Samuel; Arroyo, Luzmila; Di Fiore, Anthony; Erwin, Terry; Higuchi, Niro; Killeen, Timothy J; Laurance, Susan G; Laurance, William F; Lewis, Simon L; Monteagudo, Abel; Neill, David A; Vargas, Percy Núñez; Pitman, Nigel C A; Silva, J Natalino M; Martínez, Rodolfo Vásquez

    2004-01-01

    A previous study by Phillips et al. of changes in the biomass of permanent sample plots in Amazonian forests was used to infer the presence of a regional carbon sink. However, these results generated a vigorous debate about sampling and methodological issues. Therefore we present a new analysis of biomass change in old-growth Amazonian forest plots using updated inventory data. We find that across 59 sites, the above-ground dry biomass in trees that are more than 10 cm in diameter (AGB) has increased since plot establishment by 1.22 +/- 0.43 Mg per hectare per year (ha(-1) yr(-1), where 1 ha = 10(4) m2), or 0.98 +/- 0.38 Mg ha(-1) yr(-1) if individual plot values are weighted by the number of hectare years of monitoring. This significant increase is neither confounded by spatial or temporal variation in wood specific gravity, nor dependent on the allometric equation used to estimate AGB. The conclusion is also robust to uncertainty about diameter measurements for problematic trees: for 34 plots in western Amazon forests a significant increase in AGB is found even with a conservative assumption of zero growth for all trees where diameter measurements were made using optical methods and/or growth rates needed to be estimated following fieldwork. Overall, our results suggest a slightly greater rate of net stand-level change than was reported by Phillips et al. Considering the spatial and temporal scale of sampling and associated studies showing increases in forest growth and stem turnover, the results presented here suggest that the total biomass of these plots has on average increased and that there has been a regional-scale carbon sink in old-growth Amazonian forests during the previous two decades. PMID:15212090

  16. PLOT3D Export Tool for Tecplot

    NASA Technical Reports Server (NTRS)

    Alter, Stephen

    2010-01-01

    The PLOT3D export tool for Tecplot solves the problem of modified data being impossible to output for use by another computational science solver. The PLOT3D Exporter add-on enables the use of the most commonly available visualization tools to engineers for output of a standard format. The exportation of PLOT3D data from Tecplot has far reaching effects because it allows for grid and solution manipulation within a graphical user interface (GUI) that is easily customized with macro language-based and user-developed GUIs. The add-on also enables the use of Tecplot as an interpolation tool for solution conversion between different grids of different types. This one add-on enhances the functionality of Tecplot so significantly, it offers the ability to incorporate Tecplot into a general suite of tools for computational science applications as a 3D graphics engine for visualization of all data. Within the PLOT3D Export Add-on are several functions that enhance the operations and effectiveness of the add-on. Unlike Tecplot output functions, the PLOT3D Export Add-on enables the use of the zone selection dialog in Tecplot to choose which zones are to be written by offering three distinct options - output of active, inactive, or all zones (grid blocks). As the user modifies the zones to output with the zone selection dialog, the zones to be written are similarly updated. This enables the use of Tecplot to create multiple configurations of a geometry being analyzed. For example, if an aircraft is loaded with multiple deflections of flaps, by activating and deactivating different zones for a specific flap setting, new specific configurations of that aircraft can be easily generated by only writing out specific zones. Thus, if ten flap settings are loaded into Tecplot, the PLOT3D Export software can output ten different configurations, one for each flap setting.

  17. Intelligence Constraints on Terrorist Network Plots

    NASA Astrophysics Data System (ADS)

    Woo, Gordon

    Since 9/11, the western intelligence and law enforcement services have managed to interdict the great majority of planned attacks against their home countries. Network analysis shows that there are important intelligence constraints on the number and complexity of terrorist plots. If two many terrorists are involved in plots at a given time, a tipping point is reached whereby it becomes progressively easier for the dots to be joined and for the conspirators to be arrested, and for the aggregate evidence to secure convictions. Implications of this analysis are presented for the campaign to win hearts and minds.

  18. An Intuitive Graphical Approach to Understanding the Split-Plot Experiment

    ERIC Educational Resources Information Center

    Robinson, Timothy J.; Brenneman, William A.; Myers, William R.

    2009-01-01

    While split-plot designs have received considerable attention in the literature over the past decade, there seems to be a general lack of intuitive understanding of the error structure of these designs and the resulting statistical analysis. Typically, students learn the proper error terms for testing factors of a split-plot design via "expected…

  19. A reduced volumetric expansion factor plot

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.

    1979-01-01

    A reduced volumetric expansion factor plot was constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors were found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

  20. A reduced volumetric expansion factor plot

    NASA Technical Reports Server (NTRS)

    Hendricks, R. C.

    1979-01-01

    A reduced volumetric expansion factor plot has been constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors have been found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

  1. PLOT3D- DRAWING THREE DIMENSIONAL SURFACES

    NASA Technical Reports Server (NTRS)

    Canright, R. B.

    1994-01-01

    PLOT3D is a package of programs to draw three-dimensional surfaces of the form z = f(x,y). The function f and the boundary values for x and y are the input to PLOT3D. The surface thus defined may be drawn after arbitrary rotations. However, it is designed to draw only functions in rectangular coordinates expressed explicitly in the above form. It cannot, for example, draw a sphere. Output is by off-line incremental plotter or online microfilm recorder. This package, unlike other packages, will plot any function of the form z = f(x,y) and portrays continuous and bounded functions of two independent variables. With curve fitting; however, it can draw experimental data and pictures which cannot be expressed in the above form. The method used is division into a uniform rectangular grid of the given x and y ranges. The values of the supplied function at the grid points (x, y) are calculated and stored; this defines the surface. The surface is portrayed by connecting successive (y,z) points with straight-line segments for each x value on the grid and, in turn, connecting successive (x,z) points for each fixed y value on the grid. These lines are then projected by parallel projection onto the fixed yz-plane for plotting. This program has been implemented on the IBM 360/67 with on-line CDC microfilm recorder.

  2. IRIS Spectrum Line Plot - Numeric Simulation

    NASA Video Gallery

    This video is similar to the IRIS Spectrum Line Plot video at http://www.youtube.com/watch?v=E4V_vF3qMSI, but now as derived from a numerical simulation of the Sun by the University of Oslo. Credit...

  3. ChromPlot for MicroChemLab

    SciTech Connect

    Lewis, Patrick R.

    2001-12-19

    The software entitled "ChromPlot for MicroChemLab" is used to collect, display, and save data from the Sandia National Laboratories chemical analysis system dubbed MicroChemLab. Sensor data is streamed from a MicroChemLab unit into a computer thru RS-232 in a manner that is not amenable to plotting. Also, there is no direct way to start and stop the unit as is. This software rearranges the data into something that can be easily plotted in real-time then save the data into a text file. In addition, this software provides the users a means to start and stop the hardware. This software was written specifically for MicroChemLab. MicroChemLab data is delivered at 6- 7 pts/sec/channel in a two-channel system for 1-2 min. This code is written around that premise. It is written for Pentium or higher machines running Windows 9x/Me/NT/2000/XP. This software was not developed under the BMS CRADA; it is software we use in the lab for our own testing. Bristol Meyers Squibb (BMS) will use this software for testing an online process monitor based on MicroChemLab. They have not indicated their interest in marketing our device or the software.

  4. Kinetic plots for gas chromatography: theory and experimental verification.

    PubMed

    Jespers, Sander; Roeleveld, Kevin; Lynen, Frederic; Broeckhoven, Ken; Desmet, Gert

    2015-03-20

    Mathematical kinetic plot expressions have been established for the correct extrapolation of the kinetic performance measured in a thin-film capillary GC column with fixed length into the performance that can be expected in a longer column used at the same outlet velocity but at either the maximal inlet pressure or at the optimal inlet pressure, i.e., the one leading to an operation at the kinetic performance limit of the given capillary size. To determine this optimal pressure, analytical solutions have been established for the three roots of the corresponding cubic equation. Experimental confirmation of the kinetic plot extrapolations in GC has been obtained measuring the efficiency of a simple test mixture on 30, 60, 90 and 120m long (coupled) columns.

  5. FLOWCHART; a computer program for plotting flowcharts

    USGS Publications Warehouse

    Bender, Bernice

    1982-01-01

    The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five

  6. PetroPlot: A plotting and data management tool set for Microsoft Excel

    NASA Astrophysics Data System (ADS)

    Su, Yongjun; Langmuir, Charles H.; Asimow, Paul D.

    2003-03-01

    PetroPlot is a 4000-line software code written in Visual Basic for the spreadsheet program Excel that automates plotting and data management tasks for large amount of data. The major plotting functions include: automation of large numbers of multiseries XY plots; normalized diagrams (e.g., spider diagrams); replotting of any complex formatted diagram with multiple series for any other axis parameters; addition of customized labels for individual data points; and labeling flexible log scale axes. Other functions include: assignment of groups for samples based on multiple customized criteria; removal of nonnumeric values; calculation of averages/standard deviations; calculation of correlation matrices; deletion of nonconsecutive rows; and compilation of multiple rows of data for a single sample to single rows appropriate for plotting. A cubic spline function permits curve fitting to complex time series, and comparison of data to the fits. For users of Excel, PetroPlot increases efficiency of data manipulation and visualization by orders of magnitude and allows exploration of large data sets that would not be possible making plots individually. The source codes are open to all users.

  7. Adjusting the Passing Scores for Gearing up for Safety: Production Agriculture Safety Training for Youth Curriculum Test Instruments

    ERIC Educational Resources Information Center

    Hoover, William Brian; French, Brian F.; Field, William E.; Tormoehlen, Roger L.

    2012-01-01

    Minimum passing scores for the Gearing Up for Safety: Production Agriculture Safety Training for Youth curriculum (Gearing Up for Safety) were set in 2006 with widely used and established procedures by efforts of subject matter experts (French, Breidenbach et al., 2007; French, Field, and Tormoehlen, 2006, 2007). While providing a research-based…

  8. Field test results for nitrogen removal by the constructed wetland component of an agricultural water recycling system

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Wetland Reservoir Subirrigation Systems (WRSIS) are innovative agricultural water recycling systems that can provide economic and environmental benefits. A constructed wetland is a main component of WRSIS, and an important function of this constructed wetland is drainage water treatment of nitrog...

  9. Loran-C plotting program for plotting lines of position on standard charts

    NASA Technical Reports Server (NTRS)

    Roman, J. P.

    1981-01-01

    A set of programs used to plot Loran C lines of position on any common map or standard aviation sectional chart are given. The Loran C plotting program JRPLOT FORTRAN uses a standard Calcomp compatible plotting subroutine package for the Hewlett-Packard 7203A graphic plotter. The programs are designed to be run on an IBM System 370 computer. A simple add subtract method is used to calculate the lines of position. A description of how to use the program and some methods of operation are given.

  10. A comparison of trenched plot techniques for partitioning soil respiration

    SciTech Connect

    Bond-Lamberty, Benjamin; Bronson, Dustin; Bladyka, Emma; Gower, Stith T.

    2011-07-16

    Partitioning the soil surface CO{sub 2} flux (R{sub S}) flux is an important step in understanding ecosystem-level carbon cycling, given that R{sub S} is poorly constrained and its source components may have different responses to climate change. Trenched plots are a classic method of separating the R{sub S} source fluxes, but labor-intensive and may cause considerable disturbance to the soil environment. This study tested if various methods of plant suppression in trenched plots affected R{sub S} fluxes, quantified the R{sub S} response to soil temperature and moisture changes, and estimated the heterotrophic contribution to R{sub S}. It was performed in a boreal black spruce (Picea mariana) plantation, using a complete randomized design, during the 2007 growing season (May-November). Trenched plots had significantly lower R{sub S} than control plots, with differences appearing {approx}100 days after trenching; spatial variability doubled after trenching but then declined throughout the experiment. Most trenching treatments had significantly lower (by {approx}0.5 {mu}mol m{sup -2} s{sup -1}) R{sub S} than the controls, and there was no significant difference in R{sub S} among the various trenching treatments. Soil temperature at 2 cm explained more R{sub S} variability than did 10-cm temperature or soil moisture. Temperature sensitivity (Q10) declined in the control plots from {approx}2.6 (at 5 C) to {approx}1.6 (at 15 C); trenched plots values were higher, from 3.1 at 5 C to 1.9 at 15 C. We estimated R{sub S} for the study period to be 241 {+-} 40 g C m{sup -2}, with roots contributing 64% of R{sub S} after accounting for fine root decay, and 293 g C m{sup -2} for the entire year. These findings suggest that laborious hand weeding of vegetation may be usefully replaced by other methods, easing future studies of this large and poorly-understood carbon flux.

  11. Intensive Site 1 Vegetation Plot Photos 2012

    DOE Data Explorer

    Norby, Richard; Sloan, Victoria

    2015-04-02

    Photographs were taken on 24th June, 15th July and 17th August 2012, using a Canon Ixus 70 7.1 megapixel digital camera. Photographs were taken during the recording of weekly soil moisture, temperature and thaw depth measurements (Sloan et al., 2014), over a time period spanning approximately 6 hours on each day. Photographs were taken from positions where matted trail allowed access to vegetation plots.

  12. The Bivariate Plotting Procedure for Hearing Assessment of Adults Who Are Severely to Profoundly Mentally Retarded.

    ERIC Educational Resources Information Center

    Cattey, Tommy J.

    1985-01-01

    Puretone auditory assessment of 21 adults with severe to profound mental retardation indicated that a bivariate plotting procedure of predicting hearing sensitivity from the acoustic reflexes should be included in an audiological test battery for this population. (CL)

  13. Assessing hydrologic model nonlinearity using response surface plots

    NASA Astrophysics Data System (ADS)

    Kuczera, George

    1990-10-01

    When a conceptual hydrologic model is calibrated to observed data, a posterior distribution summarizing uncertainty about model parameters can be derived. For models with more than two parameters, this distribution can be very awkward to work with. However, when a model is approximately linear over the region of parameter space with appreciable posterior density, the posterior distribution can be approximated by a multivariate normal distribution which provides a powerful tool for studying parameter uncertainty, testing hypotheses, and determining the reliability of model predictions. Model nonlinearity can be assessed using numerical measures such as those developed by Beale, and Bates and Watts. Complementing these measures are response surface plots. This study considers problems encountered when interpreting response surface plots for models with more than two parameters. It is argued that linearized conditional probability regions should be displayed on response surface plots to highlight the region of likely parameter values. Where significant parameter interaction exists, it is possible that only a small fraction of the response surface will display probable model parameter values. In such cases, generating the response surface in principal component planes is computationally more efficient. Two case studies using four-parameter conceptual hydrologic models illustrate these points and also demonstrate some of the pitfalls in relying solely on Beale's measure to assess model nonlinearity.

  14. 9 CFR 108.3 - Preparation of plot plans.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a... on the plot plan the use of immediate adjacent properties such as, residential area, pasture,...

  15. 9 CFR 108.3 - Preparation of plot plans.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a... on the plot plan the use of immediate adjacent properties such as, residential area, pasture,...

  16. Master plot analysis of microcracking in graphite/epoxy and graphite/PEEK laminates

    NASA Technical Reports Server (NTRS)

    Nairn, John A.; Hu, Shoufeng; Bark, Jong Song

    1993-01-01

    We used a variational stress analysis and an energy release rate failure criterion to construct a master plot analysis of matrix microcracking. In the master plot, the results for all laminates of a single material are predicted to fall on a single line whose slope gives the microcracking toughness of the material. Experimental results from 18 different layups of AS4/3501-6 laminates show that the master plot analysis can explain all observations. In particular, it can explain the differences between microcracking of central 90 deg plies and of free-surface 90 deg plies. Experimental results from two different AS4/PEEK laminates tested at different temperatures can be explained by a modified master plot that accounts for changes in the residual thermal stresses. Finally, we constructed similar master plot analyses for previous literature microcracking models. All microcracking theories that ignore the thickness dependence of the stresses gave poor results.

  17. Program Aids Creation Of X-Y Plots

    NASA Technical Reports Server (NTRS)

    Jeletic, James F.

    1993-01-01

    VEGAS computer program enables application programmers to create X-Y plots in various modes through high-level subroutine calls. Modes consist of passive, autoupdate, and interactive modes. In passive mode, VEGAS takes input data, produces plot, and returns control to application program. In autoupdate mode, forms plots and automatically updates them as more information received. In interactive mode, displays plot and provides popup menus for user to alter appearance of plot or to modify data. Written in FORTRAN 77.

  18. Agriculture: Newsroom

    EPA Pesticide Factsheets

    Agriculture Newsroom. News releases, reports, and other documents from around EPA that are of interest or direct importance to the environmental management or compliance efforts of the agricultural community.

  19. Grassland agriculture

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Agriculture in grassland environments is facing multiple stresses from: shifting demographics, declining and fragmented agricultural landscapes, declining environmental quality, variable and changing climate, volatile and increasing energy costs, marginal economic returns, and globalization. Degrad...

  20. Transport of cyazofamid and kresoxim methyl in runoff at the plot and catchment scales

    NASA Astrophysics Data System (ADS)

    Lefrancq, Marie; Joaquín García Verdú, Antonio; Maillard, Elodie; Imfeld, Gwenaël; Payraudeau, Sylvain

    2013-04-01

    Surface runoff and erosion during the course of rainfall events represent major processes of pesticides transport from agricultural land to aquatic ecosystem. In general, field and catchment studies on pesticide transfer are carried out separately. A study at both scales may enable to improve the understanding of scale effects on processes involved in pesticides transport and to give clues on the source areas within an agricultural catchment. In this study, the transport in runoff of two widely used fungicides, i.e. kresoxim methyl (KM) and cyazofamid (CY) was assessed in a 43 ha vineyard catchment and the relative contribution of the total fungicides export from one representative plot was evaluated. During an entire period of fungicide application, from May to August 2011, the discharge and loads of dissolved and particle-laden KM and CY were monitored at the plot and catchment scales. The results showed larger export coefficient of KM and CY from catchment (0.064 and 0.041‰ for KM and CY respectively) than from the studied plot (0.009 and 0.023 ‰ for KM and CY respectively). It suggests that the plot margins especially the road network contributed as well to the fungicide loads. This result underlines the impact of fungicide drift on non-target areas. Furthermore, a larger rainfall threshold is necessary at the plot scale to trigger runoff and mobilise pesticides than on the road network. At the plot scale, a rapid dissipation of the both fungicides in the top soil was observed. It highlights that the risky period encompasses the first rainfall events triggering runoff after the applications. At both scales, KM and CY were not detected in suspended solids (i.e. > 0.7 µm). However their partitioning in runoff water differed. 64.1 and 91.8% of the KM load was detected in the dissolved phase (i.e. < 0.22 µm) at the plot and catchment scales respectively, whereas 98.7 and 100% of the CY load was detected in the particulate phase (i.e. between 0.22 and 0.7 µm

  1. Rainfall Manipulation Plot Study (RaMPS)

    DOE Data Explorer

    Blair, John [Kansas State University; Fay, Phillip [USDA-ARS; Knapp, Alan [Colorado State University; Collins, Scott [University of New Mexico; Smith, Melinda [Yale University

    Rainfall Manipulation Plots facility (RaMPs) is a unique experimental infrastructure that allows us to manipulate precipitation events and temperature, and assess population community, and ecosystem responses in native grassland. This facility allows us to manipulate the amount and timing of individual precipitation events in replicated field plots at the Konza Prairie Long-Term Ecological Research (LTER) site. Questions we are addressing include: • What is the relative importance of more extreme precipitation patterns (increased climatic variability) vs. increased temperatures (increased climatic mean) with regard to their impact on grassland ecosystem structure and function? Both projected climate change factors are predicted to decrease soil water availability, but the mechanisms by which this resource depletion occurs differ. • Will altered precipitation patterns, increased temperatures and their interaction increase opportunities for invasion by exotic species? • Will long-term (6-10 yr) trajectories of community and ecosystem change in response to more extreme precipitation patterns continue at the same rate as initial responses from years 1-6? Or will non-linear change occur as potential ecological thresholds are crossed? And will increased temperatures accelerate these responses? Data sets are available as ASCII files, in Excel spreadsheets, and in SAS format. (Taken from http://www.konza.ksu.edu/ramps/backgrnd.html

  2. Holey buckets! Monitoring plot-scale runoff

    NASA Astrophysics Data System (ADS)

    Rupp, D. E.; Stewart, R. D.; Abou Najm, M. R.; Selker, J. S.; Selker, F.; Van De Giesen, N.

    2011-12-01

    Measurement of plot-scale surface runoff is commonly achieved by diverting flow through a flume or tipping bucket system, or into a storage tank, such as bucket. The principle advantages of the "bucket method" are relative simplicity and low cost. The principle drawback is that the bucket requires frequent emptying during heavy runoff, unless the bucket volume is very large. As a solution to the problem of emptying the bucket while still retaining the properties of simplicity and economy, we used a holey bucket. Our "bucket" is vertical 4"-diameter ABS pipe, sealed at the bottom, and with holes along the side of the pipe. A screen in the pipe catches debris that could block the holes. The holes' diameters and locations were chosen to capture both low (<1 L min-1) and high (>100 L min-1) flows. Runoff is diverted into the top of the pipe. The runoff rate is determined from the water level and the rate of change in water level: the water level gives the flow rate out of the submerged holes (using Torricelli's Law) and the change in water level gives the rate of change in storage in the pipe. The runoff is calculated as the sum of the hole discharge and the rate of change in storage. A calibration parameter is applied to account for departures from assumptions of the theory. The design is currently being utilized to monitor runoff from experimental plots on a rural hillslope in Chile.

  3. Plant Material Testing: Can we learn from small plots

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Choosing appropriate plant materials for a rangeland rehabilitation project is critical for long-term success. The question is what species to seed? We find it is first necessary to define objectives and goals before debating plant material choices. For example, our objective is often to suppress...

  4. TRANSECT STUDY OF THE INTRINSIC BIOREMEDIATION TEST PLOT: DOVER AFB

    EPA Science Inventory

    The work described in this report is part of a project undertaken by the Bioremediation of Chlorinated Solvents Action Team of the Remediation Technologies Development Forum, a joint U.S. Federal agency-industry collaboration, to study the natural attenuation of chlorinated ethen...

  5. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    PubMed

    Hullman, Jessica; Resnick, Paul; Adar, Eytan

    2015-01-01

    Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  6. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering

    PubMed Central

    Hullman, Jessica; Resnick, Paul; Adar, Eytan

    2015-01-01

    Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity. PMID:26571487

  7. Analysis and Modeling of soil hydrology under different soil additives in artificial runoff plots

    NASA Astrophysics Data System (ADS)

    Ruidisch, M.; Arnhold, S.; Kettering, J.; Huwe, B.; Kuzyakov, Y.; Ok, Y.; Tenhunen, J. D.

    2009-12-01

    The impact of monsoon events during June and July in the Korean project region Haean Basin, which is located in the northeastern part of South Korea plays a key role for erosion, leaching and groundwater pollution risk by agrochemicals. Therefore, the project investigates the main hydrological processes in agricultural soils under field and laboratory conditions on different scales (plot, hillslope and catchment). Soil hydrological parameters were analysed depending on different soil additives, which are known for prevention of soil erosion and nutrient loss as well as increasing of water infiltration, aggregate stability and soil fertility. Hence, synthetic water-soluble Polyacrylamides (PAM), Biochar (Black Carbon mixed with organic fertilizer), both PAM and Biochar were applied in runoff plots at three agricultural field sites. Additionally, as control a subplot was set up without any additives. The field sites were selected in areas with similar hillslope gradients and with emphasis on the dominant land management form of dryland farming in Haean, which is characterised by row planting and row covering by foil. Hydrological parameters like satured water conductivity, matrix potential and water content were analysed by infiltration experiments, continuous tensiometer measurements, time domain reflectometry as well as pressure plates to indentify characteristic water retention curves of each horizon. Weather data were observed by three weather stations next to the runoff plots. Measured data also provide the input data for modeling water transport in the unsatured zone in runoff plots with HYDRUS 1D/2D/3D and SWAT (Soil & Water Assessment Tool).

  8. Map_plot and bgg_plot: software for integration of geoscience datasets

    NASA Astrophysics Data System (ADS)

    Gaillot, Philippe; Punongbayan, Jane T.; Rea, Brice

    2004-02-01

    Since 1985, the Ocean Drilling Program (ODP) has been supporting multidisciplinary research in exploring the structure and history of Earth beneath the oceans. After more than 200 Legs, complementary datasets covering different geological environments, periods and space scales have been obtained and distributed world-wide using the ODP-Janus and Lamont Doherty Earth Observatory-Borehole Research Group (LDEO-BRG) database servers. In Earth Sciences, more than in any other science, the ensemble of these data is characterized by heterogeneous formats and graphical representation modes. In order to fully and quickly assess this information, a set of Unix/Linux and Generic Mapping Tool-based C programs has been designed to convert and integrate datasets acquired during the present ODP and the future Integrated ODP (IODP) Legs. Using ODP Leg 199 datasets, we show examples of the capabilities of the proposed programs. The program map_plot is used to easily display datasets onto 2-D maps. The program bgg_plot (borehole geology and geophysics plot) displays data with respect to depth and/or time. The latter program includes depth shifting, filtering and plotting of core summary information, continuous and discrete-sample core measurements (e.g. physical properties, geochemistry, etc.), in situ continuous logs, magneto- and bio-stratigraphies, specific sedimentological analyses (lithology, grain size, texture, porosity, etc.), as well as core and borehole wall images. Outputs from both programs are initially produced in PostScript format that can be easily converted to Portable Document Format (PDF) or standard image formats (GIF, JPEG, etc.) using widely distributed conversion programs. Based on command line operations and customization of parameter files, these programs can be included in other shell- or database-scripts, automating plotting procedures of data requests. As an open source software, these programs can be customized and interfaced to fulfill any specific

  9. Design and Implementation of a GPS Guidance System for Agricultural Tractors Using Augmented Reality Technology

    PubMed Central

    Santana-Fernández, Javier; Gómez-Gil, Jaime; del-Pozo-San-Cirilo, Laura

    2010-01-01

    Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor’s position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR) technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems. PMID:22163479

  10. Design and implementation of a GPS guidance system for agricultural tractors using augmented reality technology.

    PubMed

    Santana-Fernández, Javier; Gómez-Gil, Jaime; del-Pozo-San-Cirilo, Laura

    2010-01-01

    Current commercial tractor guidance systems present to the driver information to perform agricultural tasks in the best way. This information generally includes a treated zones map referenced to the tractor's position. Unlike actual guidance systems where the tractor driver must mentally associate treated zone maps and the plot layout, this paper presents a guidance system that using Augmented Reality (AR) technology, allows the tractor driver to see the real plot though eye monitor glasses with the treated zones in a different color. The paper includes a description of the system hardware and software, a real test done with image captures seen by the tractor driver, and a discussion predicting that the historical evolution of guidance systems could involve the use of AR technology in the agricultural guidance and monitoring systems.

  11. Recurrence plot for parameters analysing of internal combustion engine

    NASA Astrophysics Data System (ADS)

    Alexa, O.; Ilie, C. O.; Marinescu, M.; Vilau, R.; Grosu, D.

    2015-11-01

    In many technical disciplines modem data analysis techniques has been successfully applied to understand the complexity of the system. The growing volume of theoretical knowledge about systems dynamic's offered researchers the opportunity to look for non-linear dynamics in data whose evolution linear models are unable to explain in a satisfactory manner. One approach in this respect is Recurrence Analysis - RA which is a graphical method designed to locate hidden recurring patterns, nonstationarity and structural changes. RA approach arose in natural sciences like physics and biology but quickly was adopted in economics and engineering. Meanwhile. The fast development of computer resources has provided powerful tools to perform this new and complex model. One free software which was used to perform our analysis is Visual Recurrence Analysis - VRA developed by Eugene Kononov. As is presented in this paper, the recurrence plot investigation for the analyzing of the internal combustion engine shows some of the RPA capabilities in this domain. We chose two specific engine parameters measured in two different tests to perform the RPA. These parameters are injection impulse width and engine angular speed and the tests are I11n and I51n. There were computed graphs for each of them. Graphs were analyzed and compared to obtain a conclusion. This work is an incipient research, being one of the first attempts of using recurrence plot for analyzing automotive dynamics. It opens a wide field of action for future research programs.

  12. Application of ERTS-1 imagery in the fields of geology, agriculture, forestry, and hydrology to selected test sites in Iran

    NASA Technical Reports Server (NTRS)

    Ebtehadj, K.

    1973-01-01

    The preliminary study of the ERTS-1 imagery coverage of Iran, commenced on October 26, 1972. All of the images were carefully examined, and a photomosaic covering approximately ninety-five per cent of the country was prepared. A number of images of selected areas were studied in detail. In the field of geology, a number of large scale faults were identified, which do not figure on geological maps. Furthermore, a preliminary study was carried out on the recent sediments, their possible sources, and origin. A limited number of geological work maps were prepared as well. In the fields of agriculture and forestry, studies based on color composite prints of certain areas were undertaken, with a purpose of identifying potential arable areas. Investigations in the field of water resources resulted in the discovery of a number of small lakes, and streams. Furthermore, fluctuations of the water level in some lakes were observed.

  13. Testing the validity of a Cd soil quality standard in representative Mediterranean agricultural soils under an accumulator crop.

    PubMed

    Recatalá, L; Sánchez, J; Arbelo, C; Sacristán, D

    2010-12-01

    The validity of a quality standard for cadmium (Cd) in representative agricultural Mediterranean soils under an accumulator crop (Lactuca sativa L.) is evaluated in this work considering both its effect on the crop growth (biomass production) and the metal accumulation in the edible part of the plant. Four soils with different properties relevant to regulate the behaviour of heavy metals were selected from the Valencian Region, a representative area of the European Mediterranean Region. For all soils, the effective concentration of added Cd causing 50% inhibition (EC(50)) on the biomass production was much higher than the minimum legal concentration used to declare soils as contaminated by cadmium, i.e. 100 times the baseline value for Cd, in Spain (Spanish Royal Decree 9/2005). As expected, Cd toxicity in the crop was higher in the soils having less carbonate content. On the other hand, for all soils, from the second dose on, which represents 10-times the baseline value for Cd, the metal content in crops exceeded the maximum level established for leaf crops by the European legislation (Regulation EC no. 466/2001). Soil salinity and coarse textures make the accumulation of Cd in the edible part of the plant easier. Therefore, the legal baseline soil cadmium content established by the Spanish legislation seems not valid neither from the point of view of the effect on the crop growth nor from the point of view of the metal accumulation in the edible part of the plant. In order to realistically declare contaminated soils by heavy metals, soil quality standards should be proposed taking into account the soil properties. Further research in other agricultural areas of the region would improve the basis for proposing adequate soil quality standards for heavy metals as highlighted by the European Thematic Strategy for Soil Protection.

  14. Recovery of Bacillus and Pseudomonas spp. from the 'fired plots' under shifting cultivation in northeast India.

    PubMed

    Pandey, Anita; Chaudhry, Shivaji; Sharma, Avinash; Choudhary, Vipin Singh; Malviya, Mukesh Kumar; Chamoli, Swati; Rinu, K; Trivedi, Pankaj; Palni, Lok Man S

    2011-01-01

    Soil samples, collected after the fire operations at agricultural sites under shifting cultivation in northeast India, were subjected to physico-chemical and microbial analysis. The fire affected various physico-chemical properties of the soil. Significant differences in pH and electrical conductivity were recorded in soil of fired and fallow plots. Significantly higher amounts of total organic carbon and nitrogen were estimated in fallow plots as compared to the fired. Difference in total phosphates was not significant. The fire operations resulted in stimulation of microbial communities. The bacteria were the most affected group followed by actinomycetes and fungi, respectively. The bacterial and actinomycetes counts were significantly higher in fired plots as compared to the fallow plots. The representative bacterial species recovered from the 'fired plots' belonged to the genus Bacillus and Pseudomonas. 16S rRNA analysis revealed their maximum similarity with B. clausii, B. licheniformis, B. megaterium, B. subtilis, B. thuringiensis, P. aeruginosa and P. stutzeri. Most of these species were found to be positive for phosphate solubilization and antagonism in plate based assays. In view of the importance of Bacillus and Pseudomonas species in plant growth promotion and biocontrol, recovery of these species after fire operations is indicative of the microbiological merit of shifting cultivation.

  15. Plant species richness enhances nitrogen retention in green roof plots.

    PubMed

    Johnson, Catherine; Schweinhart, Shelbye; Buffam, Ishi

    2016-10-01

    Vegetated (green) roofs have become common in many cities and are projected to continue to increase in coverage, but little is known about the ecological properties of these engineered ecosystems. In this study, we tested the biodiversity-ecosystem function hypothesis using commercially available green roof trays as replicated plots with varying levels of plant species richness (0, 1, 3, or 6 common green roof species per plot, using plants with different functional characteristics). We estimated accumulated plant biomass near the peak of the first full growing season (July 2013) and measured runoff volume after nearly every rain event from September 2012 to September 2013 (33 events) and runoff fluxes of inorganic nutrients ammonium, nitrate, and phosphate from a subset of 10 events. We found that (1) total plant biomass increased with increasing species richness, (2) green roof plots were effective at reducing storm runoff, with vegetation increasing water retention more than soil-like substrate alone, but there was no significant effect of plant species identity or richness on runoff volume, (3) green roof substrate was a significant source of phosphate, regardless of presence/absence of plants, and (4) dissolved inorganic nitrogen (DIN = nitrate + ammonium) runoff fluxes were different among plant species and decreased significantly with increasing plant species richness. The variation in N retention was positively related to variation in plant biomass. Notably, the increased biomass and N retention with species richness in this engineered ecosystem are similar to patterns observed in published studies from grasslands and other well-studied ecosystems. We suggest that more diverse plantings on vegetated roofs may enhance the retention capacity for reactive nitrogen. This is of importance for the sustained health of vegetated roof ecosystems, which over time often experience nitrogen limitation, and is also relevant for water quality in receiving waters

  16. [Effects of sampling plot number on tree species distribution prediction under climate change].

    PubMed

    Liang, Yu; He, Hong-Shi; Wu, Zhi-Wei; Li, Xiao-Na; Luo, Xu

    2013-05-01

    Based on the neutral landscapes under different degrees of landscape fragmentation, this paper studied the effects of sampling plot number on the prediction of tree species distribution at landscape scale under climate change. The tree species distribution was predicted by the coupled modeling approach which linked an ecosystem process model with a forest landscape model, and three contingent scenarios and one reference scenario of sampling plot numbers were assumed. The differences between the three scenarios and the reference scenario under different degrees of landscape fragmentation were tested. The results indicated that the effects of sampling plot number on the prediction of tree species distribution depended on the tree species life history attributes. For the generalist species, the prediction of their distribution at landscape scale needed more plots. Except for the extreme specialist, landscape fragmentation degree also affected the effects of sampling plot number on the prediction. With the increase of simulation period, the effects of sampling plot number on the prediction of tree species distribution at landscape scale could be changed. For generalist species, more plots are needed for the long-term simulation.

  17. ODP-PLOT and MAP-PLOT: Software for integration of geosciences data set

    NASA Astrophysics Data System (ADS)

    Gaillot, P.

    2002-12-01

    Since 17 years, Ocean Drilling Program (ODP) supports multidisciplinary researches to explore the structure and history of Earth beneath the oceans. After more than 200 Legs, complementary data sets covering different time and space scales have been obtained and distributed world-wide using ODP-Janus and LDEO-BRG data base servers. In Earth Sciences, more than any other science, the ensemble of these data is characterized by heterogeneous format and graphical representation mode. In order to fully and quickly put value into this information, we present a set of Unix/Linux-based C programs for conversion and integration of data sets acquired during ODP legs. Using Leg 199 datasets, we show examples of the capabilities of these programs. ODP-PLOT displays data with respect to depth and/or time. The program includes depth-time shifting, filtering and plotting of core summary, analysis (structure) and measurements (physical properties, geochemistry ...) of samples, in-situ continuous logs, magneto- and bio-stratigraphy, specific sediment analysis (lithology, grain size, texture, porosity...), core and borehole wall images. MAP-PLOT is used to easily display datasets onto 2-D maps. Outputs of both programs can be in post-script (ps), portable document format (pdf) or standard image format (GIF, JPEG, ...). Based on command line operations and customization of parameter files, these programs can be included in other Shell- or database- scripts, automating plotting procedures of data request. As an open source software, these programs can be customized to answer any specific plotting need.

  18. Computer program utilizes FORTRAN 4 subroutines for contour plotting

    NASA Technical Reports Server (NTRS)

    Block, N.; Garret, R.; Lawson, C.

    1967-01-01

    Computer program constructs lists of xy-coordinate pairs that define contour curves for an arbitrary given function of two variables and transmits these lists to plotting equipment to produce contour plots. The principal subroutine, CONTUR, is independent of any specific system of plotting subroutines and equipment.

  19. Computer routine adds plotting capabilities to existing programs

    NASA Technical Reports Server (NTRS)

    Harris, J. C.; Linnekin, J. S.

    1966-01-01

    PLOTAN, a generalized plot analysis routine written for the IBM 7094 computer, minimizes the difficulties in adding plot capabilities to large existing programs. PLOTAN is used in conjunction with a binary tape writing routine and has the ability to plot any variable on the intermediate binary tape as a function of any other.

  20. 9 CFR 108.3 - Preparation of plot plans.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a particular land area, whether or not they are all used for the preparation and initial shipping of...

  1. 33 CFR 164.38 - Automatic radar plotting aids (ARPA).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Automatic radar plotting aids... plotting aids (ARPA). (a) The following definitions are used in this section— Bulk means material in any... cargo residue. (b) An Automatic Radar Plotting Aid (ARPA) that complies with the standard for...

  2. 33 CFR 164.38 - Automatic radar plotting aids (ARPA).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Automatic radar plotting aids... plotting aids (ARPA). (a) The following definitions are used in this section— Bulk means material in any... cargo residue. (b) An Automatic Radar Plotting Aid (ARPA) that complies with the standard for...

  3. JAVA SWING-BASED PLOTTING PACKAGE RESIDING WITHIN XAL

    SciTech Connect

    Shishlo, Andrei P; Chu, Paul; Pelaia II, Tom

    2007-01-01

    A data plotting package residing in the XAL tools set is presented. This package is based on Java SWING, and therefore it has the same portability as Java itself. The data types for charts, bar-charts, and color-surface plots are described. The algorithms, performance, interactive capabilities, limitations, and the best usage practices of this plotting package are discussed.

  4. 33 CFR 164.38 - Automatic radar plotting aids (ARPA).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Automatic radar plotting aids... plotting aids (ARPA). (a) The following definitions are used in this section— Bulk means material in any... Radar Plotting Aids” (Appendix A), and that has both audible and visual alarms, must be installed...

  5. 33 CFR 164.38 - Automatic radar plotting aids (ARPA).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Automatic radar plotting aids... plotting aids (ARPA). (a) The following definitions are used in this section— Bulk means material in any... Radar Plotting Aids” (Appendix A), and that has both audible and visual alarms, must be installed...

  6. 33 CFR 164.38 - Automatic radar plotting aids (ARPA).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Automatic radar plotting aids... plotting aids (ARPA). (a) The following definitions are used in this section— Bulk means material in any... Radar Plotting Aids” (Appendix A), and that has both audible and visual alarms, must be installed...

  7. China Report, Agriculture, No. 266

    DTIC Science & Technology

    2007-11-02

    Cultivated Land Stressed (S. Deshan; NONGYE JINGJI WENTI [PROBLEMS IN AGRICULTURAL ECONOMICS], No 12, 23 Dec 82) 3 PRC Sets Policy On Chemical...83) 35 Disease-Resistant Cotton Variety Cultivation Praised (HEBEI RIBAO, 28 Mar 83) 38 Drive Against Wheat Aphids and Stem Rust Reported...expanding peasants’ private plots on hilly land and giving more collectively-owned barren mountain slopes to peasants for tree cultivation under

  8. Field and laboratory tests for assessing the feasibility on the use of municipal treated wastewater for agricultural irrigation

    NASA Astrophysics Data System (ADS)

    Gallardo, Helena; Lovera, Raúl; Himi, Mahjoub; Sendrós, Alexandre; Marguí, Eva; Tapias, Josefina C.; Queralt, Ignasi; Casas, Albert

    2014-05-01

    he scarcity of water resources in many regions of the planet in the XXIst century is a challenge which concerns the current societies. Water use has been growing during the last decades. Therefore, different strategies of water management in many water-deficient regions are being carried out, especially in densely populated areas, in coastal zones or in regions under arid or semi-arid climate. During the last years, there has been a growing interest in the use of the subsurface for water storage though shallow percolating ponds. Moreover, on a best-practices basis, the use of reclaimed wastewater for different purposes is becoming more usual. The irrigation with municipal treated wastewater (MTWW) is an interesting strategy especially in the agricultural sector, which represents the main water user in contrast with other socioeconomic activities. The study area is located near Castellbisbal, on the lower stretches of the Llobregat River close to the Metropolitan area of Barcelona (Catalonia, Spain). The site consists on a percolating pond and agricultural fields around. In order to assess the feasibility of using reclaimed wastewater for different uses in this site, several experiments both on field and at the laboratory were carried out. First of all, a detailed non-destructive geophysical survey was conducted using electrical resistivity tomography (ERT) technique. Geophysical data were constrained by geological and hydrogeological properties from boreholes and water wells. On the other hand, laboratory experiments were carried out through batch and column assays, focused on the detailed water-mineral particles interrelationships that can occur at the vadose zone. Soil samples from the crop fields around and water samples from the nearest well, as from the municipal wastewater treatment plant were used. Chemical and mineralogical composition of the soils were determined by using non-destructive spectroscopic techniques as x-ray fluorescence (XRF) and x-ray powder

  9. Tracing sources of suspended sediment in a Canadian agricultural watershed using a Bayesian model: Testing different groups of fingerprinting properties

    NASA Astrophysics Data System (ADS)

    Gaspar, Leticia; Owens, Philip; Petticrew, Ellen; Lobb, David; Koiter, Alexander; Reiffarth, Dominic; Barthod, Louise; Liu, Kui; Martinez-Carreras, Nuria

    2015-04-01

    An understanding of sediment redistribution processes and the main sediment sources within a watershed is needed to support catchment management strategies, to control soil erosion processes, and to preserve water quality and ecological status. The fingerprinting technique is increasingly recognised as a method for establishing the source of the sediment transported within a catchment. However, the different behaviour of the various fingerprinting properties has been recognised as a major limitation of the technique, and the uncertainty associated with tracer selection has to be addressed. Do the different properties give similar results? Can we combine different groups of tracers? This study aims to compare and evaluate the differences between fingerprinting predictions provided by a Bayesian mixing model using different groups of tracer properties for use in sediment source identification. We are employing fallout radionuclides (137Cs, 210Pbex) and geochemical elements as conventional fingerprinting properties, and colour parameters and compound-specific stable isotopes (CSSIs) as emerging properties; both alone and in combination. These fingerprinting properties are being used to determine the proportional contributions of fine sediment in the South Tobacco Creek Watershed, an agricultural catchment located in south-central Manitoba in Canada. We present preliminary results to evaluate the use of different statistical procedures to increase the accuracy of fingerprinting outputs and establish protocols for the selection of appropriate fingerprint properties.

  10. Agricultural Wastes.

    ERIC Educational Resources Information Center

    Jewell, W. J.; Switzenbaum, M. S.

    1978-01-01

    Presents a literature review of agricultural wastes, covering publications of 1976-77. Some of the areas covered are: (1) water characteristics and impacts; (2) waste treatment; (3) reuse of agricultural wastes; and (4) nonpoint pollution sources. A list of 150 references is also presented. (HM)

  11. VOCATIONAL AGRICULTURE.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento. Research Coordinating Unit.

    TO ASSIST THOSE WHO MAKE DECISIONS RELATING TO EDUCATIONAL PROGRAMS IN AGRICULTURE, RECENT RESEARCH IN VOCATIONAL AGRICULTURE IS SUMMARIZED. A 1963 STUDY TREATS THE RELATIONSHIP BETWEEN WORK EXPERIENCE AND STUDENT CHARACTERISTICS, PLANS, AND ASPIRATIONS. STUDIES ON POST-SECONDARY EDUCATION CONCERN GUIDELINES FOR TECHNICIAN PROGRAMS, JUSTIFICATION…

  12. Volcano plots in analyzing differential expressions with mRNA microarrays.

    PubMed

    Li, Wentian

    2012-12-01

    A volcano plot displays unstandardized signal (e.g. log-fold-change) against noise-adjusted/standardized signal (e.g. t-statistic or -log(10)(p-value) from the t-test). We review the basic and interactive use of the volcano plot and its crucial role in understanding the regularized t-statistic. The joint filtering gene selection criterion based on regularized statistics has a curved discriminant line in the volcano plot, as compared to the two perpendicular lines for the "double filtering" criterion. This review attempts to provide a unifying framework for discussions on alternative measures of differential expression, improved methods for estimating variance, and visual display of a microarray analysis result. We also discuss the possibility of applying volcano plots to other fields beyond microarray.

  13. On the Use of Trenched Plots to Quantify Sources of Soil Surface CO2 flux

    NASA Astrophysics Data System (ADS)

    Bond-Lamberty, B. P.; Bronson, D. R.; Bladyka, E.; Gower, S. T.

    2010-12-01

    Partitioning soil respiration (Rs) into its component sources--minimally, autotrophically- and heterotrophically-derived fluxes--is important for understanding ecosystem function and carbon balance. A variety of techniques have been used to partition Rs, including trenched plots, in which plants and roots are excluded from a small plot. We examined how a variety of factors, including herbicides, shade cloth and measurement collar depth, would affect trenched plot Rs in a boreal black spruce (Picea mariana) plantation. Soil temperature and moisture were both significant predictors of Rs, while shade cloth and herbicide, both potentially labor-saving methods of weed control in the plots, exerted no measurable effect. The use of 'deep' measurement collars in place of trenching produced higher measured levels of Rs, implying an autotrophic contribution in the measured flux. These results should help inform use of this low-tech, but cheap and well-tested, measurement technique.

  14. A plot tree structure to represent surface flow connectivity in rural catchments: definition and application for mining critical source areas and temporal conditions

    NASA Astrophysics Data System (ADS)

    Gascuel-Odoux, Chantal; Cordier, Marie-Odile; Grimaldi, Catherine; Salmon-Monviola, Jordy; Masson, Veronique; Squividant, Herve; Trepos, Ronan

    2013-04-01

    Agricultural landscapes are structured by a mosaic of farmers'fields whose boundaries and land use change over time, and by linear elements such as hedgerows, ditches and roads, which are more or less connected to each other. Such man-made features are now well known to have an effect on catchment hydrology, erosion and water quality. In such agricultural landscapes, it is crucial to have an adequate functional representation of the flow pathways and define relevant indicators of surface flow connectivity over the catchment towards the stream, as a necessary step for improving landscape design and water protection. A new conceptual object oriented approach has been proposed by building the drainage network on the identification of the inlets and outlets for surface water flow on each farmers' field and surrounding landscape elements (Aurousseau et al., 2009 ; Gascuel-Odoux et al., 2011), then on delineating a set of elementary plot outlet trees labelled by attributes which feed the stream. This drainage network is therefore represented as a global plot outlet tree which conceptualizes the connectivity of the surface flow patterns over the catchment. This approach has been applied to different catchment areas, integrated in modelling (Gascuel-Odoux et al., 2009) and decision support tools. It provides a functional display of data for decision support which can highlight the plots of potential risk regarding the surface runoff, areas which are often shortly extended over catchments (suspended sediment application). Integrated in modelling and mining tools, it allows to catch typologies of the most spatial pattern involved in water quality degradation (herbicides transport model) (Trepos et al., 2012) and test their permanency in time regarding the variations of climate conditions and agricultural practices (Salmon-Monviola et al., 2011). This set of works joins skills in hydrology, agronomy and computer sciences. Aurousseau P., Gascuel-Odoux C., Squividant H

  15. PHENIX (Pioneering High Energy Nuclear Interaction eXperiment) Data Plots from the PHENIX Plot Database

    DOE Data Explorer

    The PHENIX Experiment is the largest of the four experiments currently taking data at the Relativistic Heavy Ion Collider. PHENIX, the Pioneering High Energy Nuclear Interaction eXperiment, is an exploratory experiment for the investigation of high energy collisions of heavy ions and protons. PHENIX is designed specifically to measure direct probes of the collisions such as electrons, muons, and photons.The primary goal of PHENIX is to discover and study a new state of matter called the Quark-Gluon Plasma.[From http://www.phenix.bnl.gov/phenix/WWW/intro/] The PHENIX plot database allows searching by collision species, energies of the X and Y axis, and specific runs. Figures and data plots from published PHENIX papers are also available at http://www.phenix.bnl.gov//WWW/talk/pub_papers.php. (Specialized Interface)

  16. Agricultural Energy Practices. Agriculture Energy.

    ERIC Educational Resources Information Center

    Crank, Ron

    This instructional unit is one of 10 developed by students on various energy-related areas that deals specifically with agricultural energy practices. Its objective is for the student to be able to discuss energy use and conservation of resources in the production of agricultural products. Some topics covered are basic uses of direct energy in…

  17. Agriculture Education. Agricultural Metal Working.

    ERIC Educational Resources Information Center

    Stuttgart Public Schools, AR.

    This curriculum guide is designed for group instruction of secondary agricultural education students enrolled in one or two semester-long courses in agricultural metal working. The guide presents units of study in the following areas: (1) oxyacetylene welding, (2) arc welding, (3) sheet metal, (4) blueprint reading for welders and (5) job…

  18. iCanPlot: visual exploration of high-throughput omics data using interactive Canvas plotting.

    PubMed

    Sinha, Amit U; Armstrong, Scott A

    2012-01-01

    Increasing use of high throughput genomic scale assays requires effective visualization and analysis techniques to facilitate data interpretation. Moreover, existing tools often require programming skills, which discourages bench scientists from examining their own data. We have created iCanPlot, a compelling platform for visual data exploration based on the latest technologies. Using the recently adopted HTML5 Canvas element, we have developed a highly interactive tool to visualize tabular data and identify interesting patterns in an intuitive fashion without the need of any specialized computing skills. A module for geneset overlap analysis has been implemented on the Google App Engine platform: when the user selects a region of interest in the plot, the genes in the region are analyzed on the fly. The visualization and analysis are amalgamated for a seamless experience. Further, users can easily upload their data for analysis--which also makes it simple to share the analysis with collaborators. We illustrate the power of iCanPlot by showing an example of how it can be used to interpret histone modifications in the context of gene expression.

  19. Bacterial content in runoff from simulated rainfall applied to plots amended with poultry litter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    To evaluate potential bacterial runoff from poultry litter, litter was applied to test plots and exposed to simulated rainfall 1, 8 or 15 d after litter application. Runoff samples were tested for Salmonella and Campylobacter, two bacterial pathogens commonly associated with poultry, as well as com...

  20. Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology.

    PubMed

    Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

    2015-08-01

    When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literature: the 4-quadrant plot and the polar plot recently proposed by Critchley et al. The polar plot is thought to be the more advanced statistical tool, but care should be taken when it comes to its interpretation. The polar plot excludes possibly important measurements from the data. The polar plot transforms the data nonlinearily, which may prevent it from being seen clearly. In this article, we compare the 4-quadrant and the polar plot in detail and thoroughly describe advantages and limitations of each. We also discuss pitfalls concerning the methods to prepare the researcher for the sound use of both methods. Finally, we briefly revisit the Bland-Altman plot for the use in this context.

  1. WCPP-THE WOLF PLOTTING AND CONTOURING PACKAGE

    NASA Technical Reports Server (NTRS)

    Masaki, G. T.

    1994-01-01

    The WOLF Contouring and Plotting Package provides the user with a complete general purpose plotting and contouring capability. This package is a complete system for producing line printer, SC4020, Gerber, Calcomp, and SD4060 plots. The package has been designed to be highly flexible and easy to use. Any plot from a quick simple plot (which requires only one call to the package) to highly sophisticated plots (including motion picture plots) can be easily generated with only a basic knowledge of FORTRAN and the plot commands. Anyone designing a software system that requires plotted output will find that this package offers many advantages over the standard hardware support packages available. The WCPP package is divided into a plot segment and a contour segment. The plot segment can produce output for any combination of line printer, SC4020, Gerber, Calcomp, and SD4060 plots. The line printer plots allow the user to have plots available immediately after a job is run at a low cost. Although the resolution of line printer plots is low, the quick results allows the user to judge if a high resolution plot of a particular run is desirable. The SC4020 and SD4060 provide high speed high resolution cathode ray plots with film and hard copy output available. The Gerber and Calcomp plotters provide very high quality (of publishable quality) plots of good resolution. Being bed or drum type plotters, the Gerber and Calcomp plotters are usually slow and not suited for large volume plotting. All output for any or all of the plotters can be produced simultaneously. The types of plots supported are: linear, semi-log, log-log, polar, tabular data using the FORTRAN WRITE statement, 3-D perspective linear, and affine transformations. The labeling facility provides for horizontal labels, vertical labels, diagonal labels, vector characters of a requested size (special character fonts are easily implemented), and rotated letters. The gridding routines label the grid lines according to

  2. Agricultural Geophysics

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The four geophysical methods predominantly used for agricultural purposes are resistivity, electromagnetic induction, ground penetrating radar (GPR), and time domain reflectometry (TDR). Resistivity and electromagnetic induction methods are typically employed to map lateral variations of apparent so...

  3. Agriculture Sectors

    EPA Pesticide Factsheets

    The Agriculture sectors comprise establishments primarily engaged in growing crops, raising animals, and harvesting fish and other animals. Find information on compliance, enforcement and guidance on EPA laws and regulations on the NAICS 111 & 112 sectors.

  4. Agricultural Microbiology.

    ERIC Educational Resources Information Center

    Brill, Winston J.

    1981-01-01

    Elucidates strategies for applying microbiological techniques to traditional agricultural practices. Discusses the manipulation of microorganisms that live with plants and also the problems involved in the introduction of new genes into crop plants by recombinant DNA methods. (CS)

  5. Atmospheric Radiation Measurement (ARM) Data Plots and Figures

    DOE Data Explorer

    ARM Program data is available in daily diagnostic plots that can be easily grouped into daily, weekly, monthly, and even yearly increments. By visualizing ARM data in thumbnail-sized data plots, users experience highly-browsable subsets of data available at the Data Archive including complimentary data products derived from data processed by ARM. These thumbnails allow users to quickly scan for a particular type of condition, like a clear day or a day with persistent cirrus. From a diagnostics perspective, the data plots assist in looking for missing data, for data exceeding a particular range, or for loading multiple variables (e.g., shortwave fluxes and precipitation), and to determine whether a certain science or data quality condition is associated with some other parameter (e.g., high wind or rain).[taken from http://www.arm.gov/data/data_plots.stm] Several interfaces and tools have been developed to make data plots easy to generate and manipulate. For example, the NCVWeb is an interactive NetCDF data plotting tool that ARM users can use to plot data as they order it or to plot regular standing data orders. It allows production of detailed tables, extraction of data, statistics output, comparison plotting, etc. without the need for separate visualization software. Users will be requested to create a password, but the data plots are free for viewing and downloading.

  6. Storytelling in Earth sciences: The eight basic plots

    NASA Astrophysics Data System (ADS)

    Phillips, Jonathan

    2012-11-01

    Reporting results and promoting ideas in science in general, and Earth science in particular, is treated here as storytelling. Just as in literature and drama, storytelling in Earth science is characterized by a small number of basic plots. Though the list is not exhaustive, and acknowledging that multiple or hybrid plots and subplots are possible in a single piece, eight standard plots are identified, and examples provided: cause-and-effect, genesis, emergence, destruction, metamorphosis, convergence, divergence, and oscillation. The plots of Earth science stories are not those of literary traditions, nor those of persuasion or moral philosophy, and deserve separate consideration. Earth science plots do not conform those of storytelling more generally, implying that Earth scientists may have fundamentally different motivations than other storytellers, and that the basic plots of Earth Science derive from the characteristics and behaviors of Earth systems. In some cases preference or affinity to different plots results in fundamentally different interpretations and conclusions of the same evidence. In other situations exploration of additional plots could help resolve scientific controversies. Thus explicit acknowledgement of plots can yield direct scientific benefits. Consideration of plots and storytelling devices may also assist in the interpretation of published work, and can help scientists improve their own storytelling.

  7. Agricultural Waste.

    PubMed

    Shu, Huajie; Zhang, Panpan; Chang, Chein-Chi; Wang, Renqing; Zhang, Shuping

    2015-10-01

    The management and disposal of agricultural waste are drawn more and more attention because of the increasing yields and negative effects on the environment. However, proper treatments such as converting abundant biomass wastes into biogas through anaerobic digestion technology, can not only avoid the negative impacts, but also convert waste into available resources. This review summarizes the studies of nearly two hundred scholars from the following four aspects: the characterization, reuse, treatment, and management of agricultural waste.

  8. Toxicological effects of the waste of the sugarcane industry, used as agricultural fertilizer, on the test system Allium cepa.

    PubMed

    Anacleto, Leonardo Ramos; Roberto, Matheus Mantuanelli; Marin-Morales, Maria Aparecida

    2017-04-01

    Sugarcane is cultivated in tropical countries for sugar and ethanol production. In Brazil, this culture is among the most profitable with a production of 658.7 million tons/harvest. Sugarcane filter cake (SCFC) is a waste rich in organic matter and micronutrients, but also contains toxic metals. As it has been used as fertilizer and there is not enough knowledge about its environmental impacts, this work assessed the genotoxicogenetic effects of raw SCFC and associations with soil and sugarcane bagasse (SCB), by Allium cepa tests. Six associations of SCFC + soil and five associations of SCFC + soil + SCB were tested at three moments of degradation: initial (T0), 3 and 6 months (T1 and T2). Genotoxicogenetic assays were performed with solid substrates of these associations and with their respective aqueous extracts. Chemical analysis showed a decrease in metals, total organic carbon and nitrogen after 6 months of biodegradation, complying with Brazilian laws. In general, the combination of SCFC + soil + SCB was better than using only SCFC. T0 solubilized samples of different associations composed by highest quantities of SCFC inhibited the MI and induced CA without presenting mutagenicity (except for 75%-SCFC + soil + SCB). T1 samples showed more cytotoxicity than T0 samples, and also presented genotoxic and mutagenic effects. Solid substrate and solubilized associations of SCFC + soil + SCB of T2 samples had no toxicity. These results suggest 6 months of biodegradation and the SCB adding as effective to reduce toxicogenetic effects induced by SCFC. Also, small proportions of SCFC interfered less on the A. cepa test-system when compared with those containing high quantities of residue.

  9. Measuring and modelling water related soil-vegetation feedbacks in a fallow plot

    NASA Astrophysics Data System (ADS)

    Ursino, N.; Cassiani, G.; Deiana, R.; Vignoli, G.; Boaga, J.

    2013-08-01

    Land fallowing is one possible response to shortage of water for irrigation. Leaving the soil unseeded implies a change of the soil functioning that has an impact on the water cycle. The development of a soil crust in the open spaces between the patterns of grass weed affects the soil properties and the field scale water balance. The objectives of this study are to test the potential of integrated non invasive geophysical methods and ground-image analysis and to quantify the effect of the soil vegetation interaction on the water balance of a fallow land at the local and plot scale. We measured repeatedly in space and time local soil saturation and vegetation cover over two small plots located in southern Sardinia, Italy, during a controlled irrigation experiment. One plot was left unseeded and the other was cultivated. The comparative analysis of ERT maps of soil moisture evidenced a considerably different hydrologic response to irrigation of the two plots. Local measurements of soil saturation and vegetation cover were repeated in space to evidence a positive feedback between weed growth and infiltration at the fallow plot. A simple bucket model captured the different soil moisture dynamics at the two plots during the infiltration experiment and was used to estimate the impact of the soil vegetation feedback on the yearly water balance at the fallow site.

  10. Measuring and modeling water-related soil-vegetation feedbacks in a fallow plot

    NASA Astrophysics Data System (ADS)

    Ursino, N.; Cassiani, G.; Deiana, R.; Vignoli, G.; Boaga, J.

    2014-03-01

    Land fallowing is one possible response to shortage of water for irrigation. Leaving the soil unseeded implies a change of the soil functioning that has an impact on the water cycle. The development of a soil crust in the open spaces between the patterns of grass weed affects the soil properties and the field-scale water balance. The objectives of this study are to test the potential of integrated non-invasive geophysical methods and ground-image analysis and to quantify the effect of the soil-vegetation interaction on the water balance of fallow land at the local- and plot scale. We measured repeatedly in space and time local soil saturation and vegetation cover over two small plots located in southern Sardinia, Italy, during a controlled irrigation experiment. One plot was left unseeded and the other was cultivated. The comparative analysis of ERT maps of soil moisture evidenced a considerably different hydrologic response to irrigation of the two plots. Local measurements of soil saturation and vegetation cover were repeated in space to evidence a positive feedback between weed growth and infiltration at the fallow plot. A simple bucket model captured the different soil moisture dynamics at the two plots during the infiltration experiment and was used to estimate the impact of the soil vegetation feedback on the yearly water balance at the fallow site.

  11. Agriculture: About EPA's National Agriculture Center

    EPA Pesticide Factsheets

    EPA's National Agriculture Center (Ag Center), with the support of the United States Department of Agriculture, serves growers, livestock producers, other agribusinesses, and agricultural information/education providers.

  12. Nitrous oxide flux from poultry-manured erosion plots and grass filters after simulated rain

    SciTech Connect

    Coyne, M.S.; Gilfillen, R.A.; Blevins, R.L.

    1994-07-01

    Adding carbon-rich materials to fields, like manure, may enhance denitrification. Grass filters which are used to trap surface runoff from these fields, may also provide a carbon-rich environment that favors water infiltration and denitrification. Nitrous oxide (N{sub 2}O) may be evolved in these settings. It is a radiatively important trace gas and intermediate in the denitrification pathway and several other microbial processes. We measured N{sub 2}O flux, after simulated rain, using a soil cover technique in poultry-manured plots and grass filters receiving their runoff. Intact soil cores were used to relate the N{sub 2}O flux to the denitrification potential of the plots. Nitrous oxide fluxes were smaller in grass filters than in manured plots, even though more denitrifying bacteria were present. The average N{sub 2}O flux in the three most dynamic erosion plots was 755 {mu}g N{sub 2}O-N m{sup -2}h{sup -1}, which was 39% of the maximal denitrification rate measured in acetylene-blocked, NO{sub 3}{sup -}-amended soil cores. Nitrous oxide flux immediately after rainfall was greater than N{sub 2}O flux measurements reported for similar agricultural settings. 16 refs., 2 figs., 4 tabs.

  13. Split-plot designs for robotic serial dilution assays.

    PubMed

    Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

    2011-12-01

    This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs.

  14. Matching Visual Saliency to Confidence in Plots of Uncertain Data

    PubMed Central

    Feng, David; Kwock, Lester; Lee, Yueh; Taylor, Russell M.

    2011-01-01

    Conveying data uncertainty in visualizations is crucial for preventing viewers from drawing conclusions based on untrustworthy data points. This paper proposes a methodology for efficiently generating density plots of uncertain multivariate data sets that draws viewers to preattentively identify values of high certainty while not calling attention to uncertain values. We demonstrate how to augment scatter plots and parallel coordinates plots to incorporate statistically modeled uncertainty and show how to integrate them with existing multivariate analysis techniques, including outlier detection and interactive brushing. Computing high quality density plots can be expensive for large data sets, so we also describe a probabilistic plotting technique that summarizes the data without requiring explicit density plot computation. These techniques have been useful for identifying brain tumors in multivariate magnetic resonance spectroscopy data and we describe how to extend them to visualize ensemble data sets. PMID:20975135

  15. Comparative evolutionary diversity and phylogenetic structure across multiple forest dynamics plots: a mega-phylogeny approach.

    PubMed

    Erickson, David L; Jones, Frank A; Swenson, Nathan G; Pei, Nancai; Bourg, Norman A; Chen, Wenna; Davies, Stuart J; Ge, Xue-Jun; Hao, Zhanqing; Howe, Robert W; Huang, Chun-Lin; Larson, Andrew J; Lum, Shawn K Y; Lutz, James A; Ma, Keping; Meegaskumbura, Madhava; Mi, Xiangcheng; Parker, John D; Fang-Sun, I; Wright, S Joseph; Wolf, Amy T; Ye, W; Xing, Dingliang; Zimmerman, Jess K; Kress, W John

    2014-01-01

    Forest dynamics plots, which now span longitudes, latitudes, and habitat types across the globe, offer unparalleled insights into the ecological and evolutionary processes that determine how species are assembled into communities. Understanding phylogenetic relationships among species in a community has become an important component of assessing assembly processes. However, the application of evolutionary information to questions in community ecology has been limited in large part by the lack of accurate estimates of phylogenetic relationships among individual species found within communities, and is particularly limiting in comparisons between communities. Therefore, streamlining and maximizing the information content of these community phylogenies is a priority. To test the viability and advantage of a multi-community phylogeny, we constructed a multi-plot mega-phylogeny of 1347 species of trees across 15 forest dynamics plots in the ForestGEO network using DNA barcode sequence data (rbcL, matK, and psbA-trnH) and compared community phylogenies for each individual plot with respect to support for topology and branch lengths, which affect evolutionary inference of community processes. The levels of taxonomic differentiation across the phylogeny were examined by quantifying the frequency of resolved nodes throughout. In addition, three phylogenetic distance (PD) metrics that are commonly used to infer assembly processes were estimated for each plot [PD, Mean Phylogenetic Distance (MPD), and Mean Nearest Taxon Distance (MNTD)]. Lastly, we examine the partitioning of phylogenetic diversity among community plots through quantification of inter-community MPD and MNTD. Overall, evolutionary relationships were highly resolved across the DNA barcode-based mega-phylogeny, and phylogenetic resolution for each community plot was improved when estimated within the context of the mega-phylogeny. Likewise, when compared with phylogenies for individual plots, estimates of

  16. Comparative evolutionary diversity and phylogenetic structure across multiple forest dynamics plots: a mega-phylogeny approach

    PubMed Central

    Erickson, David L.; Jones, Frank A.; Swenson, Nathan G.; Pei, Nancai; Bourg, Norman A.; Chen, Wenna; Davies, Stuart J.; Ge, Xue-jun; Hao, Zhanqing; Howe, Robert W.; Huang, Chun-Lin; Larson, Andrew J.; Lum, Shawn K. Y.; Lutz, James A.; Ma, Keping; Meegaskumbura, Madhava; Mi, Xiangcheng; Parker, John D.; Fang-Sun, I.; Wright, S. Joseph; Wolf, Amy T.; Ye, W.; Xing, Dingliang; Zimmerman, Jess K.; Kress, W. John

    2014-01-01

    Forest dynamics plots, which now span longitudes, latitudes, and habitat types across the globe, offer unparalleled insights into the ecological and evolutionary processes that determine how species are assembled into communities. Understanding phylogenetic relationships among species in a community has become an important component of assessing assembly processes. However, the application of evolutionary information to questions in community ecology has been limited in large part by the lack of accurate estimates of phylogenetic relationships among individual species found within communities, and is particularly limiting in comparisons between communities. Therefore, streamlining and maximizing the information content of these community phylogenies is a priority. To test the viability and advantage of a multi-community phylogeny, we constructed a multi-plot mega-phylogeny of 1347 species of trees across 15 forest dynamics plots in the ForestGEO network using DNA barcode sequence data (rbcL, matK, and psbA-trnH) and compared community phylogenies for each individual plot with respect to support for topology and branch lengths, which affect evolutionary inference of community processes. The levels of taxonomic differentiation across the phylogeny were examined by quantifying the frequency of resolved nodes throughout. In addition, three phylogenetic distance (PD) metrics that are commonly used to infer assembly processes were estimated for each plot [PD, Mean Phylogenetic Distance (MPD), and Mean Nearest Taxon Distance (MNTD)]. Lastly, we examine the partitioning of phylogenetic diversity among community plots through quantification of inter-community MPD and MNTD. Overall, evolutionary relationships were highly resolved across the DNA barcode-based mega-phylogeny, and phylogenetic resolution for each community plot was improved when estimated within the context of the mega-phylogeny. Likewise, when compared with phylogenies for individual plots, estimates of

  17. Soil Incubation Study to Assess the Impacts of Manure Application and Climate Change on Greenhouse Gas Emissions from Agricultural Soil

    NASA Astrophysics Data System (ADS)

    Schiavone, K.; Barbieri, L.; Adair, C.

    2015-12-01

    Agricultural fields in Vermont's Lake Champlain Basin have problems with the loss of nutrients due to runoff which creates eutrophic conditions in the lakes, ponds and rivers. In efforts to retain nitrogen and other nutrients in the soil farmers have started to inject manure rather than spraying it. Our understanding of the effects this might have on the volatilization of nitrogen into nitrous oxide is limited. Already, agriculture produces 69% of the total nitrous oxide emissions in the US. Understanding that climate change will affect the future of agriculture in Vermont, we set up a soil core incubation test to monitor the emissions of CO₂ and N₂O using a Photoacoustic Gas Sensor (PAS). Four 10 cm soil cores were taken from nine different fertilizer management plots in a No Till corn field; Three Injected plots, three Broadcast plots, and three Plow plots. Frozen soil cores were extracted in early April, and remained frozen before beginning the incubation experiment to most closely emulate three potential spring environmental conditions. The headspace was monitored over one week to get emission rates. This study shows that environmental and fertilizer treatments together do not have a direct correlation to the amount of CO₂ and N₂O emissions from agricultural soil. However, production of CO₂ was 26% more in warmer environmental conditions than in variable(freeze/thaw) environmental conditions. The injected fertilizer produced the most emissions, both CO₂ and N₂O. The total N₂O emissions from Injected soil cores were 2.2x more than from traditional broadcast manure cores. We believe this is likely due to the addition of rich organic matter under anaerobic soil conditions. Although, injected fertilizer is a better application method for reducing nutrient runoff, the global warming potential of N₂O is 298 times that of CO₂. With climate change imminent, assessing the harmful effects and benefits of injected fertilizer is a crucial next step in

  18. Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music.

    PubMed

    Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

    2016-02-01

    We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

  19. Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music

    NASA Astrophysics Data System (ADS)

    Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

    2016-02-01

    We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

  20. How to Create and Manipulate Radar Range-Doppler Plots

    DTIC Science & Technology

    2014-12-01

    UNCLASSIFIED How to Create and Manipulate Radar Range–Doppler Plots Don Koks Cyber & Electronic Warfare Division Defence Science and Technology...to the approach taken in addressing the jamming task in a later report. We discuss in detail how a radar generates a range–Doppler plot , using a set...FOR PUBLIC RELEASE ii UNCLASSIFIED UNCLASSIFIED DSTO–TN–1386 How to Create and Manipulate Radar Range–Doppler Plots Executive Summary This report lays

  1. Double Dalitz plot analysis of flavor and CP modes

    NASA Astrophysics Data System (ADS)

    Anderson, Melissa Beth

    We use the CLEO-c 281.1 pb-1 of psi(3770) data to study the structure of the D0 → K0S pi+pi- Dalitz plot. Given the luminosity and sigma(DD) we have 1011960 correlated DD pairs. We analyze the case where both D's decay to three body decay modes. We analyze the two correlated Dalitz plots and show how this method increases sensitivity to effects of quantum correlations. We present two different studies. One is the Flavor tag analysis, where we reconstruct D 0 → K-pi+pi 0 and D0 → K0S pi+pi-. This was used to test our sensitivity to Doubly Cabibbo Suppressed (DCS) terms. We find that, if we ignore the DCS terms, the results differ from the CLEO II.V model by as much as 4sigma. Thus, in Flavor tags, we see evidence for enhancement of DCS terms through quantum correlations. The other study is the Combo tag analysis where both D's are reconstructed to K0S pi+pi-. This mode entangles both Flavor and CP. We construct a correlated Probability Distribution Function (PDF), and it is built on the CLEO II.V model for the D0 → K0S pi+pi- Dalitz plot. We find that with low statistics, 180 compared to 5305 events, we are able to reproduce the CLEO II.V analysis within errors. However, we do find one significant difference in the amplitude of the f2(1270). Also, the significance level, our goodness of fit, indicates that the CLEO II.V model has 0.4% significance. Between the f2(1270) discrepancy and the low significance level, we conclude that the CLEO II.V model is insufficient for our correlated data. We conclude that the quantum correlations in our data have a significant effect on our data. Our Flavor tag data indicates we are more sensitive to DCS terms than uncorrelated data. Our Combo tag data indicates that we see differences between our correlated data and CLEO II.V's uncorrelated data.

  2. Line plotting program using DI-3000/Grafmaker routines

    NASA Technical Reports Server (NTRS)

    Poppen, William A., Jr.; Smith-Taylor, Rudeen

    1986-01-01

    A line plotting program has been developed using the DI-3000 graphics libraries and incorporates Grafmaker subroutines. The program allows multiple lines on a frame and multiple frames per run. Options such as automatic scaling, linear or single-cycle log graphs, and plot text such as titles, legends and axis labels are incorporated in the program. Greek and other fonts can be used in the plot text as well as upper and lower case text. Plot inputs are specified through a control file. The program also allows display of multiple independent data sets on a single graph.

  3. A multi-criteria index for ecological evaluation of tropical agriculture in southeastern Mexico.

    PubMed

    Huerta, Esperanza; Kampichler, Christian; Ochoa-Gaona, Susana; De Jong, Ben; Hernandez-Daumas, Salvador; Geissen, Violette

    2014-01-01

    The aim of this study was to generate an easy to use index to evaluate the ecological state of agricultural land from a sustainability perspective. We selected environmental indicators, such as the use of organic soil amendments (green manure) versus chemical fertilizers, plant biodiversity (including crop associations), variables which characterize soil conservation of conventional agricultural systems, pesticide use, method and frequency of tillage. We monitored the ecological state of 52 agricultural plots to test the performance of the index. The variables were hierarchically aggregated with simple mathematical algorithms, if-then rules, and rule-based fuzzy models, yielding the final multi-criteria index with values from 0 (worst) to 1 (best conditions). We validated the model through independent evaluation by experts, and we obtained a linear regression with an r2 = 0.61 (p = 2.4e-06, d.f. = 49) between index output and the experts' evaluation.

  4. A Multi-Criteria Index for Ecological Evaluation of Tropical Agriculture in Southeastern Mexico

    PubMed Central

    Huerta, Esperanza; Kampichler, Christian; Ochoa-Gaona, Susana; De Jong, Ben; Hernandez-Daumas, Salvador; Geissen, Violette

    2014-01-01

    The aim of this study was to generate an easy to use index to evaluate the ecological state of agricultural land from a sustainability perspective. We selected environmental indicators, such as the use of organic soil amendments (green manure) versus chemical fertilizers, plant biodiversity (including crop associations), variables which characterize soil conservation of conventional agricultural systems, pesticide use, method and frequency of tillage. We monitored the ecological state of 52 agricultural plots to test the performance of the index. The variables were hierarchically aggregated with simple mathematical algorithms, if-then rules, and rule-based fuzzy models, yielding the final multi-criteria index with values from 0 (worst) to 1 (best conditions). We validated the model through independent evaluation by experts, and we obtained a linear regression with an r2 = 0.61 (p = 2.4e-06, d.f. = 49) between index output and the experts’ evaluation. PMID:25405980

  5. Validation of a new method for quantification of ammonia volatilization from agricultural field plots

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A low cost method of atmospheric ammonia (NH3) concentration was developed and validated for use in static chambers. This technique utilizes glass tubes coated with oxalic acid to adsorb NH3 from the air. The advantage of this procedure is that it can be used to quantify NH3 emissions from field p...

  6. HYDRUS-1D Modeling of an Irrigated Agricultural Plot with Application to Aquifer Recharge Estimation

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A variety of methods are available for estimating aquifer recharge in semi-arid regions, each with advantages and disadvantages. We are investigating a procedure for estimating recharge in an irrigated basin. The method involves computing irrigation return flows based on HYDRUS-1D modeling of root z...

  7. OPUS/PlotOPUS: An ORIGEN-S Post-Processing Utility and Plotting Program for SCALE

    SciTech Connect

    Gauld, I.C.

    2001-03-08

    The OPUS utility program produces an output file that can be used for making a variety of plots from output produced by the ORIGEN-S code that computes reactor fuel depletion, activation and fission- product buildup, and the corresponding photon and neutron source spectra. Tables containing individual and total nuclide or element concentrations, in 14 different units, may be generated as a function of time. Three classes of plot data may be produced by OPUS: (1) dominant or selected isotopes or elements, (2) photon and neutron source spectra, and (3) comparisons of selected quantities (totals or individual nuclides) between different ORIGEN-S cases. The input is designed for ease of use with self-explanatory parameter names, free-form input, and commonly used default values. The formatted output data produced by OPUS is designed to be used directly by the PlotOPUS graphics-plotting program. PlotOPUS is an interactive Visual Basic program designed for Windows 9x, 2000, and NT computers. PlotOPUS reads the formatted output data file produced by OPUS, plots the data, and will generate Windows metafile (WMF), JPEG bitmap (JPG), or Windows bitmap (BMP) files for saving the plot images. Even though it is designed to interface with PlotOPUS, the formatted OPUS output file can be easily read by other graphics packages for data visualization.

  8. Epidemiological study on healthy subjects affected by agriculture crop-residue burning episodes and its relation with their pulmonary function tests.

    PubMed

    Agarwal, Ravinder; Awasthi, Amit; Singh, Nirankar; Mittal, Susheel K; Gupta, Prabhat Kumar

    2013-01-01

    Impact of agriculture crop-residue burning (ACRB) was studied on pulmonary function tests (PFTs) of 50 healthy subjects (13-53 years). Human subjects with no previous history of lung disease were residents of five sampling sites. Investigations were carried out from February 2007 to January 2010 using spirometry. Simultaneously, concentration levels of suspended particulate matter (PM) and fine particulates (PM2.5 and PM10) were monitored using high volume sampler and Anderson Cascade Impactor, respectively. The PFTs show a significant (p < 0.05) decrease, while PM shows momentous increase during exhaustive burning of wheat and rice crop residues. Effect of ACRB on the peak expiratory flow rate (PEF) is more than that on force expiratory flow (FEF25-75%). The PEF and FEF25-75% recovered to some extent on completion of burning period, while PFTs like force vital capacity and force expiratory volume did not show a significant improvement. Due to greater concentration of fine particulates during rice crop-residue burning (CRB) than wheat CRB, there was a greater effect on pulmonary functions. The ACRB, in general, poses more effect on the lower and upper age groups in comparison to the middle age group subjects. All the analyses are well supported with large significant levels (p < 0.05) obtained by using the paired t-test.

  9. Plotting Rates of Photosynthesis as a Function of Light Quantity.

    ERIC Educational Resources Information Center

    Dean, Rob L.

    1996-01-01

    Discusses methods for plotting rates of photosynthesis as a function of light quantity. Presents evidence that suggests that empirically derived conversion factors, which are used to convert foot candles to photon fluence rates, should be used with extreme caution. Suggests how rate data are best plotted when any kind of light meter is not…

  10. "Delta Plots"--A New Way to Visualize Electronic Excitation.

    ERIC Educational Resources Information Center

    Morrison, Harry; And Others

    1985-01-01

    Presents procedures for obtaining and examples of delta plots (a way of illustrating electron density changes associated with electronic excitation). These plots are pedagogically useful for visualizing simple and complex transitions and provide a way of "seeing" the origin of highest occupied molecular orbital (HOMO)-dictated carbonyl…

  11. Plotting of bathythermograph transect data on a printer

    USGS Publications Warehouse

    Reynolds, James B.; McLain, Douglas R.

    1971-01-01

    A program for plotting bathythermograph transect data on a computer (IBM 1130) printer is available from the Great Lakes Fishery Laboratory. Temperature values are printed in positions proportional to their depths and distances from shore. Contour lines are drawn manually through the plotted points.

  12. Instrumentation for full-year plot-scale runoff monitoring

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Replicated 0.34 ha cropping systems plots have been in place since 1991 at the USDA-ARS Goodwater Creek Experimental Watershed in central Missouri. Recently, instrumentation has been installed at 18 of those plots for continuous runoff water quality and quantity monitoring. That installation require...

  13. A Guided Inquiry on Hubble Plots and the Big Bang

    ERIC Educational Resources Information Center

    Forringer, Ted

    2014-01-01

    In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

  14. Reciprocal symmetry plots as a representation of countercurrent chromatograms.

    PubMed

    Friesen, J Brent; Pauli, Guido F

    2007-03-15

    Traditionally, chromatograms in countercurrent chromatography (CCC) have been plotted with retention volume or time on the x-axis. However, the distribution constant (K) is a more appropriate, reproducible value for the x-axis, because it is a physicochemical property of a particular analyte in a particular solvent system. Therefore, K is independent of both the total column volume and the stationary-phase volume ratio (SF) of the column. Going one step beyond simple K plots, the reciprocal symmetry (ReS) plot, with K and 1/K positioned on either side of a line of symmetry on the x-axis, represents all K values, zero to infinity. Based on experimental evidence, using a mixture of CCC reference standards, the ReS plot demonstrates both the invertible and "symmetric" nature of CCC, a consequence of the exchange of the mobile and stationary phases by reversing the direction of the flow and the symmetry of the liquid-liquid partitioning process between two immiscible phases, respectively. Moreover, the interval of optimal resolution can be centered on the ReS plot to focus on K values of interest, establishing the reciprocal shifted symmetry (ReSS) plots in CCC. Improved representation of peak shape across the whole CCC polarity range is an added advantage of ReSS plots over both K and classical retention volume plots.

  15. 46 CFR 15.816 - Automatic radar plotting aids (ARPAs).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Automatic radar plotting aids (ARPAs). 15.816 Section 15... REQUIREMENTS Computations § 15.816 Automatic radar plotting aids (ARPAs). Every person in the required... aids (ARPAs), except those vessels listed in § 15.105(f) and (g) of this part, must hold an...

  16. Fungicides transport in runoff from vineyard plot and catchment: contribution of non-target areas.

    PubMed

    Lefrancq, Marie; Payraudeau, Sylvain; García Verdú, Antonio Joaquín; Maillard, Elodie; Millet, Maurice; Imfeld, Gwenaël

    2014-04-01

    Surface runoff and erosion during the course of rainfall events are major processes of pesticides transport from agricultural land to aquatic ecosystem. These processes are generally evaluated either at the plot or the catchment scale. Here, we compared at both scales the transport and partitioning in runoff water of two widely used fungicides, i.e., kresoxim-methyl (KM) and cyazofamid (CY). The objective was to evaluate the relationship between fungicides runoff from the plot and from the vineyard catchment. The results show that seasonal exports for KM and CY at the catchment were larger than those obtained at the plot. This underlines that non-target areas within the catchment largely contribute to the overall load of runoff-associated fungicides. Estimations show that 85 and 62 % of the loads observed for KM and CY at the catchment outlet cannot be explained by the vineyard plots. However, the partitioning of KM and CY between three fractions, i.e., the suspended solids (>0.7 μm) and two dissolved fractions (i.e., between 0.22 and 0.7 µm and <0.22 µm) in runoff water was similar at both scales. KM was predominantly detected below 0.22 μm, whereas CY was mainly detected in the fraction between 0.22 and 0.7 μm. Although KM and CY have similar physicochemical properties and are expected to behave similarly, our results show that their partitioning between two fractions of the dissolved phase differs largely. It is concluded that combined observations of pesticide runoff at both the catchment and the plot scales enable to evaluate the sources areas of pesticide off-site transport.

  17. AGRICULTURAL EXTENSION.

    ERIC Educational Resources Information Center

    FARQUHAR, R.N.

    AUSTRALIAN AGRICULTURAL EXTENSION HAS LONG EMPHASIZED TECHNICAL ADVISORY SERVICE AT THE EXPENSE OF THE SOCIOECONOMIC ASPECTS OF FARM PRODUCTION AND FARM LIFE. ONLY IN TASMANIA HAS FARM MANAGEMENT BEEN STRESSED. DEMANDS FOR THE WHOLE-FARM APPROACH HAVE PRODUCED A TREND TOWARD GENERALISM FOR DISTRICT OFFICERS IN MOST STATES. THE FEDERAL GOVERNMENT,…

  18. Agricultural Biodiversity.

    ERIC Educational Resources Information Center

    Postance, Jim

    1998-01-01

    The extinction of farm animals and crops is rarely brought up during discussions of endangered species and biodiversity; however, the loss of diversity in crops and livestock threatens the sustainability of agriculture. Presents three activities: (1) "The Colors of Diversity"; (2) "Biodiversity among Animals"; and (3) "Heirloom Plants." Discusses…

  19. Superplot: Graphical interface for plotting and analyzing data

    NASA Astrophysics Data System (ADS)

    Fowlie, Andrew; Bardsley, Michael Hugh

    2016-12-01

    Superplot calculates and plots statistical quantities relevant to parameter inference from a "chain" of samples drawn from a parameter space produced by codes such as MultiNest (ascl:1109.006), BAYES-X (ascl:1505.027), and PolyChord (ascl:1502.011). It offers a graphical interface for browsing a chain of many variables quickly and can produce numerous kinds of publication quality plots, including one- and two-dimensional profile likelihood, three-dimensional scatter plots, and confidence intervals and credible regions. Superplot can also save plots in PDF format, create a summary text file, and export a plot as a pickled object for importing and manipulating in a Python interpreter.

  20. Predicting cotton yield of small field plots in a cotton breeding program using UAV imagery data

    NASA Astrophysics Data System (ADS)

    Maja, Joe Mari J.; Campbell, Todd; Camargo Neto, Joao; Astillo, Philip

    2016-05-01

    One of the major criteria used for advancing experimental lines in a breeding program is yield performance. Obtaining yield performance data requires machine picking each plot with a cotton picker, modified to weigh individual plots. Harvesting thousands of small field plots requires a great deal of time and resources. The efficiency of cotton breeding could be increased significantly while the cost could be decreased with the availability of accurate methods to predict yield performance. This work is investigating the feasibility of using an image processing technique using a commercial off-the-shelf (COTS) camera mounted on a small Unmanned Aerial Vehicle (sUAV) to collect normal RGB images in predicting cotton yield on small plot. An orthonormal image was generated from multiple images and used to process multiple, segmented plots. A Gaussian blur was used to eliminate the high frequency component of the images, which corresponds to the cotton pixels, and used image subtraction technique to generate high frequency pixel images. The cotton pixels were then separated using k-means cluster with 5 classes. Based on the current work, the calculated percentage cotton area was computed using the generated high frequency image (cotton pixels) divided by the total area of the plot. Preliminary results showed (five flights, 3 altitudes) that cotton cover on multiple pre-selected 227 sq. m. plots produce an average of 8% which translate to approximately 22.3 kgs. of cotton. The yield prediction equation generated from the test site was then use on a separate validation site and produced a prediction error of less than 10%. In summary, the results indicate that a COTS camera with an appropriate image processing technique can produce results that are comparable to expensive sensors.

  1. Setting the Stage for Creative Writing: Plot Scaffolds for Beginning and Intermediate Writers

    ERIC Educational Resources Information Center

    O'Day, Shannon

    2006-01-01

    Standardized writing tests focus more on content than mechanics, but writing instruction typically focuses more on mechanics than content. Plot scaffolds, can help teachers fix the balance and help foster creativity and originality in students' writing. In this practical guide, elementary and middle school teachers will find: (1) a research-based…

  2. Item Vector Plots for the Multidimensional Three-Parameter Logistic Model

    ERIC Educational Resources Information Center

    Bryant, Damon; Davis, Larry

    2011-01-01

    This brief technical note describes how to construct item vector plots for dichotomously scored items fitting the multidimensional three-parameter logistic model (M3PLM). As multidimensional item response theory (MIRT) shows promise of being a very useful framework in the test development life cycle, graphical tools that facilitate understanding…

  3. ChIPS - Chandra's Interactive, Publication-Ready Plotting Tool

    NASA Astrophysics Data System (ADS)

    Miller, Joseph; Burke, D.; Evans, I.; Evans, J.; Fruscione, A.; Germain, G.; McDowell, J.; McLaughlin, W.; Milaszewski, R.

    2009-09-01

    The Chandra Interactive Plotting System, ChIPS, is a powerful component of the CIAO data analysis system that enables users to visualize their data and construct high-quality, publication-ready plots interactively. The user can control almost every aspect of the plot layout and the properties of individual plot components such as tick positions or symbol styles. ChIPS offers a rich interactive environment to help users design and fine tune their plots. Key features of ChIPS include the ability to explore alternative presentations of their data by interactively adjusting plot parameters or plot component properties, or correct mistakes via the included undo/redo functionality, without having to redo the visualizations from the beginning. Through a Python or S-Lang interface, ChIPS provides a set of high-level user routines which hides the details of the underlying environment from the new user. At the same time, the scripting environment affords experienced users the ability to manipulate data or extend existing functionality. New to CIAO 4.2, all users will benefit from being able to interactively develop plots and then save the steps to create the final product as a script. This can then be used to recreate the visualization with additional data sets. Also new in CIAO 4.2 is the ability to integrate plot data with basic imaging. Users can combine their images (in world coordinates) with plot elements such as overlay contours, grids, or annotations to produce high-quality publication-ready output in the formats expected by the major journals.

  4. Application of the Langley plot for calibration of sun sensors for the Halogen Occultation Experiment (HALOE)

    NASA Technical Reports Server (NTRS)

    Moore, Alvah S., Jr.; Mauldin, L. ED, III; Stump, Charles W.; Reagan, John A.; Fabert, Milton G.

    1989-01-01

    The calibration of the Halogen Occultation Experiment (HALOE) sun sensor is described. This system consists of two energy-balancing silicon detectors which provide coarse azimuth and elevation control signals and a silicon photodiode array which provides top and bottom solar edge data for fine elevation control. All three detectors were calibrated on a mountaintop near Tucson, Ariz., using the Langley plot technique. The conventional Langley plot technique was modified to allow calibration of the two coarse detectors, which operate wideband. A brief description of the test setup is given. The HALOE instrument is a gas correlation radiometer that is now being developed for the Upper Atmospheric Research Satellite.

  5. Use of Millikan-Lauritsen plots, rather than Fowler-Nordheim plots, to analyze field emission current-voltage data

    NASA Astrophysics Data System (ADS)

    Forbes, Richard G.

    2009-06-01

    In the late 1920s, two forms of data plot were used to analyze the current-voltage (i-V) data obtained in experiments on cold field electron emission (CFE). Millikan-Lauritsen (ML) plots have the form [ln{i } versus 1/V]; Fowler-Nordheim (FN) plots have the form [ln{i /V2} versus 1/V]. In both cases common logarithms may be used instead. For historical reasons, it has become customary to use FN plots; but recent mathematical developments in CFE theory made these historical reasons less valid than they formerly were. ML plots are in fact easier to understand and use, and are more flexible when it is wanted to make corrections for all physical sources of voltage dependence in the data, or to estimate uncertainties in derived parameter values when the precise forms of voltage dependences are not known. This paper summarizes historical and recent background and argues that ML plots should now replace FN plots as the basic method of analyzing CFE i-V data (or related data involving current densities and/or fields). A formula for the interpretation of ML plot slopes is presented and discussed, and examples are given of its use.

  6. Measuring and Modelling water related soil - vegetation feedbacks in a fallow plot

    NASA Astrophysics Data System (ADS)

    Ursino, Nadia; Cassiani, Giorgio; Deiana, Rita; Vignoli, Giulio; Boaga, Jacopo

    2013-04-01

    Land fallowing is one possible response to shortage of water for irrigation. Leaving the soil unseeded implies a change of the soil functioning that has an impact on the water cycle. The development of a soil crust in the open spaces between the patterns of grass weed affects the soil properties and the field scale water balance. The objective of this study was to test the potential of integrated non invasive geophysics and ground-image analysis and to quantify the effect of the soil vegetation interaction on the water balance of a fallow land at the local and plot scale. We measured repeatedly in space and time local soil saturation and vegetation cover over two small plots located in southern Sardinia, Italy, during an infiltration experiment. One plot was left unseeded and the other was cultivated. The comparative analysis of the experimental data evidenced a positive feedback between weed growth and infiltration at the fallow plot. A simple bucket model captured the different soil moisture dynamics at the two plots during the infiltration experiment and was used to estimate the impact of the soil vegetation feedback on the yearly water balance at the site.

  7. Communicating uncertainty to agricultural scientists and professionals

    NASA Astrophysics Data System (ADS)

    Milne, Alice; Glendining, Margaret; Perryman, Sarah; Gordon, Taylor; Whitmore, Andrew

    2016-04-01

    Models of agricultural systems often aim to predict the impacts of weather and soil nutrients on crop yields and the environment. These models are used to inform scientists, policy makers and farmers on the likely effects of management. For example, a farmer might be interested in the effect of nitrogen fertilizer on his yield, whilst policy makers might be concerned with the possible polluting effects of fertilizer. There are of course uncertainties related to any model predictions and these must be communicated effectively if the end user is to draw proper conclusions and so make sound decisions. We searched the literature and found several methods for expressing the uncertainty in the predictions produced by models. We tested six of these in a formal trial. The methods we considered were: calibrated phrases, such as 'very uncertain' and 'likely', similar to those used by the IPCC; probabilities that the true value of the uncertain quantity lay within a defined range of values; confidence intervals for the expected value; histograms; box plots; and shaded arrays that depict the probability density of the uncertain quantity. We held a series of three workshops at which the participants were invited to assess the six different methods of communicating the uncertainty. In total 64 individuals took part in our study. These individuals were either scientists, policy makers or those who worked in the agricultural industry. The test material comprised four sets of results from models. These results were displayed using each of the six methods described above. The participants were asked to evaluate the methods by filling in a questionnaire. The questions were intended to test how straightforward the content was to interpret and whether each method displayed sufficient information. Our results showed differences in the efficacy of the methods of communication, and interactions with the nature of the target audience. We found that, although the verbal scale was thought to

  8. Communicating uncertainty to agricultural scientists and professionals

    NASA Astrophysics Data System (ADS)

    Milne, Alice; Glendining, Margaret; Perryman, Sarah; Whitmore, Andy

    2015-04-01

    Models of agricultural systems often aim to predict the impacts of weather and soil nutrients on crop yields and the environment. These models are used to inform scientists, policy makers and farmers on the likely effects of management. For example, a farmer might be interested in the effect of nitrogen fertilizer on his yield, whilst policy makers might be concerned with the possible polluting effects of fertilizer. There are of course uncertainties related to any model predictions and these must be communicated effectively if the end user is to draw proper conclusions and so make sound decisions. We searched the literature and found several methods for expressing the uncertainty in the predictions produced by models. We tested six of these in a formal trial. The methods we considered were: calibrated phrases, such as 'very uncertain' and 'likely', similar to those used by the IPCC; probabilities that the true value of the uncertain quantity lay within a defined range of values; confidence intervals for the expected value; histograms; box plots; and shaded arrays that depict the probability density of the uncertain quantity. We held a series of three workshops at which the participants were invited to assess the six different methods of communicating the uncertainty. In total 64 individuals took part in our study. These individuals were either scientists, policy makers or those who worked in the agricultural industry. The test material comprised four sets of results from models. These results were displayed using each of the six methods described above. The participants were asked to evaluate the methods by filling in a questionnaire. The questions were intended to test how straightforward the content was to interpret and whether each method displayed sufficient information. Our results showed differences in the efficacy of the methods of communication, and interactions with the nature of the target audience. We found that, although the verbal scale was thought to

  9. CFD Extraction Tool for TecPlot From DPLR Solutions

    NASA Technical Reports Server (NTRS)

    Norman, David

    2013-01-01

    This invention is a TecPlot macro of a computer program in the TecPlot programming language that processes data from DPLR solutions in TecPlot format. DPLR (Data-Parallel Line Relaxation) is a NASA computational fluid dynamics (CFD) code, and TecPlot is a commercial CFD post-processing tool. The Tec- Plot data is in SI units (same as DPLR output). The invention converts the SI units into British units. The macro modifies the TecPlot data with unit conversions, and adds some extra calculations. After unit conversions, the macro cuts a slice, and adds vectors on the current plot for output format. The macro can also process surface solutions. Existing solutions use manual conversion and superposition. The conversion is complicated because it must be applied to a range of inter-related scalars and vectors to describe a 2D or 3D flow field. It processes the CFD solution to create superposition/comparison of scalars and vectors. The existing manual solution is cumbersome, open to errors, slow, and cannot be inserted into an automated process. This invention is quick and easy to use, and can be inserted into an automated data-processing algorithm.

  10. VTM plots as evidence of historical change: Goldmine or landmine?

    USGS Publications Warehouse

    Keeley, Jon E.

    2004-01-01

    VTM (Vegetation Type Map) plots comprise a huge data set on vegetation composition for many parts of California collected mostly between 1929 and 1935. Historical changes in vegetation have been inferred by sampling these areas many decades later and evaluating the changes in plant dominance. VTM plots can not be precisely relocated, and it has been assumed that errors resulting from this problem are inconsequential or can be eliminated by comparison with a composite of multiple contemporary plots. This study examines that assumption for southern California shrubland landscapes by comparing the differences in species composition between closely positioned VTM-sized plots. Comparing shrub species density in 400-m² plots separated by 30 m (center to center), I found that all species exhibited considerable differences in density even over this short distance. This patchiness in shrub distribution could lead to major errors in historical reconstructions from VTM plot data. Two methods are proposed for dealing with this problem. One is to collect multiple samples from the vicinity of the VTM plot and use the observed spatial variation to set bounds on the temporal changes required to represent significant historical change. The other is to look at broad landscape changes reflected in the averages observed in a large sampling of sites.

  11. Effect of household land management on cropland topsoil organic carbon storage at plot scale in a red earth soil area of South China.

    PubMed

    Feng, S; Tan, S; Zhang, A; Zhang, Q; Pan, G; Qu, F; Smith, P; Li, L; Zhang, X

    2011-10-01

    An inventory of topsoil soil organic carbon (SOC) content in household farms was performed in a village from a red earth region in Jiangxi Province, China in 2003. In this region, the farmland managed by each household is fragmented, consisting of several plots of land that are not necessarily adjacent to each other. A statistical analysis of SOC variation with land use and household management type, and with crop management practices was conducted. Plot size ranged from 0·007 to 0·630 ha with a mean of 0·1 ha, and SOC content ranged from 1·72 to 25·2 g/kg, varying widely with a variety of land management and agricultural practices, arising from individual household behaviours. The mean SOC content in plot size <0·1 ha was 20% lower than in plot size ⩾0·1 ha. SOC of dry crop plots was 70% lower than that in rice paddies, and SOC of plots contracted from the village was almost double that of plots leased from other householders. Moreover, a 30% increase in SOC was observed with green manure cultivation, and a 55% increase under triple cropping. The difference in SOC levels between the least and most favourable cases of household land management and agricultural practice was up to 150%. The results suggest that policies targeted at crop management alone may not deliver the expected SOC benefits if household land management is also not improved.

  12. Using volcano plots and regularized-chi statistics in genetic association studies.

    PubMed

    Li, Wentian; Freudenberg, Jan; Suh, Young Ju; Yang, Yaning

    2014-02-01

    Labor intensive experiments are typically required to identify the causal disease variants from a list of disease associated variants in the genome. For designing such experiments, candidate variants are ranked by their strength of genetic association with the disease. However, the two commonly used measures of genetic association, the odds-ratio (OR) and p-value may rank variants in different order. To integrate these two measures into a single analysis, here we transfer the volcano plot methodology from gene expression analysis to genetic association studies. In its original setting, volcano plots are scatter plots of fold-change and t-test statistic (or -log of the p-value), with the latter being more sensitive to sample size. In genetic association studies, the OR and Pearson's chi-square statistic (or equivalently its square root, chi; or the standardized log(OR)) can be analogously used in a volcano plot, allowing for their visual inspection. Moreover, the geometric interpretation of these plots leads to an intuitive method for filtering results by a combination of both OR and chi-square statistic, which we term "regularized-chi". This method selects associated markers by a smooth curve in the volcano plot instead of the right-angled lines which corresponds to independent cutoffs for OR and chi-square statistic. The regularized-chi incorporates relatively more signals from variants with lower minor-allele-frequencies than chi-square test statistic. As rare variants tend to have stronger functional effects, regularized-chi is better suited to the task of prioritization of candidate genes.

  13. Using Zoom Technologies to Display HEP Plots and Talks

    NASA Astrophysics Data System (ADS)

    Watts, G.

    2012-12-01

    Particle physics conferences and experiments generate a huge number of plots and presentations. It is impossible to keep up. A typical conference (like CHEP) will have 100's of plots. A single analysis result from a major experiment will have almost 50 plots. Scanning a conference or sorting out what plots are new is almost a full time job. The advent of multi-core computing and advanced video cards means that we have more processor power available for visualization than any time in the past. This poster describes two related projects that take advantage of this to solve the viewing problem. The first, Collider Plots, has a backend that looks for new plots released by ATLAS, CMS, CDF, and DZERO and organizes them by date, by experiment, and by subgroup for easy viewing and sorting. It maintains links back to associated conference notes and web pages with full result information. The second project, Deep Conference, renders all the slides as a single large zoomable picture. In both cases, much like a web mapping program, details are revealed as you zoom in. In the case of Collider Plots the plots are stacked as histograms to give visual clues for the most recent updates and activity have occurred. Standard plug-in software for a browser allows a user to zoom in on a portion of the conference that looks interesting. As the user zooms further more and more details become visible, allowing the user to make a quick and cheap decision on whether to spend more time on a particular talk or series of plots. Both projects are available at http://deeptalk.phys.washington.edu. The poster discusses the implementation and use as well as cross platform performance and possible future directions.

  14. Import Manipulate Plot RELAP5/MOD3 Data

    SciTech Connect

    Jones, K. R.

    1999-10-05

    XMGR5 was derived from an XY plotting tool called ACE/gr, which is copyrighted by Paul J. Turner and in the public domain. The interactive version of ACE/GR is xmgr, and includes a graphical interface to the X-windows system. Enhancements to xmgr have been developed which import, manipualate, and plot data from RELAP/MOD3, MELCOR, FRAPCON, and SINDA codes, and NRC databank files. capabilities, include two-phase property table lookup functions, an equation interpreter, arithmetic library functions, and units conversion. Plot titles, labels, legends, and narrative can be displayed using Latin or Cyrillic alphabets.

  15. Ramachandran plot on the web (2.0).

    PubMed

    Gopalakrishnan, K; Sowmiya, G; Sheik, S S; Sekar, K

    2007-01-01

    The Ramachandran plot displays the main chain conformation angles (Phi and Psi) of the polypeptide chain of a protein molecule. The paper reports the updated version of the Ramachandran plot web server and has several improved options for displaying the conformation angles in various regions. In addition, options are provided to display the conformation angles in various secondary structural elements and regions within the user specified Phi and Psi values in the plot. The updated version is accessible at the following URL: http://dicsoft1.physics.iisc.ernet.in/rp/.

  16. Bacteriological quality of crops irrigated with wastewater in the Xochimilco plots, Mexico City, Mexico.

    PubMed Central

    Rosas, I; Báez, A; Coutiño, M

    1984-01-01

    Xochimilco county plots (Mexico City), one of the most fertile agricultural areas in the Valley of Mexico, produce a large portion of the fresh vegetables consumed in the city. These plots are generally irrigated with domestic wastewater, and for this reason, it was deemed important to examine and evaluate the bacteriological quality of the water, soil, and vegetables from these plots that are harvested and marketed. The soils were also examined for the classical parameters such as nitrates, ammonia, etc., and organic matter and texture. The crops selected for this study were radishes, spinach, lettuce, parsley, and celery because they are usually consumed raw. The highest bacterial counts were encountered in leafy vegetables, i.e., spinach (8,700 for total coliform and 2,400 for fecal coliform) and lettuce (37,000 for total coliform and 3,600 for fecal coliform). Statistically significant differences in bacterial counts between rinsed and unrinsed edible portions of the crops were observed even in rinsed vegetables, and high densities of fecal coliform were detected, indicating that their consumption represents a potential health hazard. The total coliform values found in irrigation water ranged from 4 X 10(4) to 29 X 10(4), and for fecal coliform the values ranged from 5 X 10(2) to 30 X 10(2). PMID:6742825

  17. Analysis of a Split-Plot Experimental Design Applied to a Low-Speed Wind Tunnel Investigation

    NASA Technical Reports Server (NTRS)

    Erickson, Gary E.

    2013-01-01

    A procedure to analyze a split-plot experimental design featuring two input factors, two levels of randomization, and two error structures in a low-speed wind tunnel investigation of a small-scale model of a fighter airplane configuration is described in this report. Standard commercially-available statistical software was used to analyze the test results obtained in a randomization-restricted environment often encountered in wind tunnel testing. The input factors were differential horizontal stabilizer incidence and the angle of attack. The response variables were the aerodynamic coefficients of lift, drag, and pitching moment. Using split-plot terminology, the whole plot, or difficult-to-change, factor was the differential horizontal stabilizer incidence, and the subplot, or easy-to-change, factor was the angle of attack. The whole plot and subplot factors were both tested at three levels. Degrees of freedom for the whole plot error were provided by replication in the form of three blocks, or replicates, which were intended to simulate three consecutive days of wind tunnel facility operation. The analysis was conducted in three stages, which yielded the estimated mean squares, multiple regression function coefficients, and corresponding tests of significance for all individual terms at the whole plot and subplot levels for the three aerodynamic response variables. The estimated regression functions included main effects and two-factor interaction for the lift coefficient, main effects, two-factor interaction, and quadratic effects for the drag coefficient, and only main effects for the pitching moment coefficient.

  18. In-situ polymerization PLOT columns I: divinylbenzene

    NASA Technical Reports Server (NTRS)

    Shen, T. C.

    1992-01-01

    A novel method for preparation of porous-layer open-tubular (PLOT) columns is described. The method involves a simple and reproducible, straight-forward in-situ polymerization of monomer directly on the metal tube.

  19. FORTRAN plotting subroutines for the space plasma laboratory

    NASA Technical Reports Server (NTRS)

    Williams, R.

    1983-01-01

    The computer program known as PLOTRW was custom made to satisfy some of the graphics requirements for the data collected in the Space Plasma Laboratory at the Johnson Space Center (JSC). The general requirements for the program were as follows: (1) all subroutines shall be callable through a FORTRAN source program; (2) all graphs shall fill one page and be properly labeled; (3) there shall be options for linear axes and logarithmic axes; (4) each axis shall have tick marks equally spaced with numeric values printed at the beginning tick mark and at the last tick mark; and (5) there shall be three options for plotting. These are: (1) point plot, (2) line plot and (3) point-line plot. The subroutines were written in FORTRAN IV for the LSI-11 Digital equipment Corporation (DEC) Computer. The program is now operational and can be run on any TEKTRONICX graphics terminal that uses a DEC Real-Time-11 (RT-11) operating system.

  20. USING LINKED MICROMAP PLOTS TO CHARACTERIZE OMERNIK ECOREGIONS

    EPA Science Inventory

    The paper introduces linked micromap (LM plots for presenting environmental summaries. The LM template includes parallel sequences of micromap, able, and statistical summary graphics panels with attention paid to perceptual grouping, sorting and linking of the summary components...

  1. A framework for plot control in interactive story systems

    SciTech Connect

    Sgouros, N.M.; Papakonstantinou, G.; Tsanakas, P.

    1996-12-31

    This paper presents a framework for plot control in interactive story systems. In this framework, the user takes the place of the main character of the story, the protagonist. The rest of the cast consists of discrete characters, each playing a specific role in the story. A separate module in this system, the plot manager, controls the behavior of the cast and specifies what the protagonist can do. The story plot is dynamically shaped by the interference between cast members and their social interactions. The system accepts as input a story map which provides the main metaphor for organizing the plot and localizes the interaction of the protagonist with the rest of the cast. We are implementing this framework in PEGASUS, an interactive travel story environment for Greek mythology.

  2. Curve Fitting and First Quadrant Plotting Program (CURVPLOT).

    DTIC Science & Technology

    designed to be used on the Wang 720B Electronic Programmable Calculator and 702 Plotting Output Writer combination. The regular plotter typing element is replaced with an IBM Dual Gothic typing element. (Author)

  3. Impact of animal waste application on runoff water quality in field experimental plots.

    PubMed

    Hill, Dagne D; Owens, William E; Tchoounwou, Paul B

    2005-08-01

    Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli) and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate) characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium. Bacteria numbers

  4. The Plotting Library http://astroplotlib.stsci.edu

    NASA Astrophysics Data System (ADS)

    Úbeda, L.

    2014-05-01

    astroplotlib is a multi-language astronomical library of plots. It is a collection of software templates that are useful to create paper-quality figures. All current templates are coded in IDL, some in Python and Mathematica. This free resource supported at Space Telescope Science Institute allows users to download any plot and customize it to their own needs. It is also intended as an educational tool.

  5. An Unusual Application of NASTRAN Contour Plotting Capability

    NASA Technical Reports Server (NTRS)

    Mittal, S.; Gallo, M.; Wang, T.

    1985-01-01

    A procedure is presented for obtaining contour plots of any physical quantity defined on a number of points of the surface of a structure. Rigid Format 1 of HEAT approach in Cosmic NASTRAN is ALTERED to enable use of contour plotting capability for scalar quantities. The ALTERED DMAP sequence is given. Examples include temperature distribution on the face of a cooled laser mirror and the angle of incidence or a radome surface.

  6. Plot plan & miscellaneous details. San Bernardino Valley Union Junior ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plot plan & miscellaneous details. San Bernardino Valley Union Junior College, Classics Building. Includes map drawers, surveying equipment lockers, counters, platforms, etc. Howard E. Jones, Architect, San Bernardino, California. Sheet 8, job no. 312. Scales 1/2 inch to the foot (details) and 1/64 inch to the foot (plot plan). February 15, 1927. - San Bernardino Valley College, Classics Building, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  7. Calibrated Passive Sampling--Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers.

    PubMed

    Pacholski, Andreas

    2016-03-21

    Agricultural ammonia (NH3) emissions (90% of total EU emissions) are responsible for about 45% airborne eutrophication, 31% soil acidification and 12% fine dust formation within the EU15. But NH3 emissions also mean a considerable loss of nutrients. Many studies on NH3 emission from organic and mineral fertilizer application have been performed in recent decades. Nevertheless, research related to NH3 emissions after application fertilizers is still limited in particular with respect to relationships to emissions, fertilizer type, site conditions and crop growth. Due to the variable response of crops to treatments, effects can only be validated in experimental designs including field replication for statistical testing. The dominating ammonia loss methods yielding quantitative emissions require large field areas, expensive equipment or current supply, which restricts their application in replicated field trials. This protocol describes a new methodology for the measurement of NH3 emissions on many plots linking a simple semi-quantitative measuring method used in all plots, with a quantitative method by simultaneous measurements using both methods on selected plots. As a semi-quantitative measurement method passive samplers are used. The second method is a dynamic chamber method (Dynamic Tube Method) to obtain a transfer quotient, which converts the semi-quantitative losses of the passive sampler to quantitative losses (kg nitrogen ha(-1)). The principle underlying this approach is that passive samplers placed in a homogeneous experimental field have the same NH3 absorption behavior under identical environmental conditions. Therefore, a transfer co-efficient obtained from single passive samplers can be used to scale the values of all passive samplers used in the same field trial. The method proved valid under a wide range of experimental conditions and is recommended to be used under conditions with bare soil or small canopies (<0.3 m). Results obtained from

  8. Plotting Positions for Historical Floods and Their Precision

    NASA Astrophysics Data System (ADS)

    Hirsch, Robert M.; Stedinger, Jery R.

    1987-04-01

    Plotting positions are needed for situations where, in addition to a systematically recorded annual flood series, one would have a record of any large floods which occurred during an extended historical period, if they occurred. Many of the published estimators are based on uncensored sampling theory which is not appropriate for such data sets. Here such historical and systematic flood records are viewed as resulting from a partially censored sampling experiment. Plotting positions are derived for such experiments using both classical and Bayesian viewpoints. In general, it is impossible to construct highly accurate estimates of the exceedance probabilities of the largest floods using only their rank, the number of observed historical floods, and the lengths of the historical period and the systematic record. For the largest flood, the coefficient of variation of exceedance-probability estimators is of the order of 1, as it is for complete systematic records. Examples illustrate the bias and precision of a variety of plotting position formulas. The differences among the different plotting positions are generally small in comparison to the sampling variability. However, plotting positions which are unbiased with uncensored samples are often the most biased when used with a combination of historical and systematic data. Three appendices consider the effect of misspecification of the length of the historical period, the effect of misspecification of the threshold of perception or observation level, and plotting positions for situations with several perception thresholds.

  9. Effects of Different Application Methods of Methane Fermentation Digested Liquid into the Paddy Plot on Soil Nitrogen Behavior and Rice Yield

    NASA Astrophysics Data System (ADS)

    Watanabe, Satoko; Nakamura, Kimihito; Seok Ryu, Chan; Iida, Michihisa; Kawashima, Shigeto

    Methane fermentation technique with the treatment of animal waste and food waste is drawing public attention as a good option for the utilization of biomass resources and it is investigated how to apply the by-product of fermentation (methane fermentation digested liquid) to agricultural fields as a fertilizer. It is important to determine an adequate method of applying digested liquid to a paddy plot as fertilizer taking into account the concentrations of soil nitrogen components and rice yield. The objective of this study is to compare the performances of three methods of applying digested liquid to paddy plots in terms of the nitrogen transformation in soil, rice yield, and nitrogen load in effluent. The three methods were pouring (with irrigation water), spreading onto the surface of a plot, and injection into paddy soil. It was found that the ammonium nitrogen concentration and the dissolved organic nitrogen concentration in soil of the spreading plot were higher than that for the pouring plot and that for the injecting plot. The rice yield was higher in the spreading plot than in the injecting and pouring plots. And, there was a significant correlation between the rice yield and the dissolved organic nitrogen just before and after the panicle initiation stage. There were no differences in the nitrogen effluent loads with surface drainage.

  10. Field experiments of Controlled Drainage of agricultural clay soils show positive effects on water quantity (retention, runoff) and water quality (nitrate leaching).

    NASA Astrophysics Data System (ADS)

    schipper, peter; stuyt, lodewijk; straat, van der, andre; schans, van der, martin

    2014-05-01

    Despite best management practices, agriculture is still facing major challenges to reduce nutrients leaching to the aquatic environment. In deltas, most of total nutrient losses from artificially drained agricultural soils are discharged via drains. Controlled drainage is a promising measure to prevent drainage of valuable nutrients, improve water quality and agricultural yield and adapt to climate change (reduce peak runoff, manage water scarcity and drought). In The Netherlands, this technique has attracted much attention by water managers and farmers alike, yet field studies to determine the expected (positive) effects for Dutch conditions were scarce. Recently, a field experiment was set up on clay soils. Research questions were: how does controlled, subsurface drainage perform on clay soils? Will deeper tile drains function just as well? What are the effects on drain water quality (especially with respect to nitrogen and salt) and crop yield? An agricultural field on clay soils was used to test different tile drainage configurations. Four types of tile drainage systems were installed, all in duplicate: eight plots in total. Each plot has its own outlet to a control box, where equipment was installed to control drain discharge and to measure the flow, concentrations of macro-ions, pH, nitrogen, N-isotopes and heavy metals. In each plot, groundwater observation wells and suction cups are installed in the saturated and vadose zones, at different depths, and crop yield is determined. Four plots discharge into a hydrologic isolated ditch, enabling the determination of water- and nutrient balances. Automatic drain water samplers and innovative nitrate sensors were installed in four plots. These enable identification and unravelling so-called first flush effects (changes in concentrations after a storm event). Water-, chloride- and nitrogen balances have been set up, and the interaction between groundwater and surface water has been quantified. The hydrological

  11. Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia

    PubMed Central

    Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

    2015-01-01

    Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in secondary dry deciduous forests. Measurements were made in 1998, 2000, 2004 and 2010, and logging, recruitment and mortality of each tree were recorded. We estimated phylogeny using rbcL and matK gene sequences and quantified phylogenetic α and β diversity. Within communities, logging decreased phylogenetic diversity, and increased overall phylogenetic clustering and terminal phylogenetic evenness. Between communities, logging increased phylogenetic similarity between evergreen and deciduous plots. On the other hand, recruitment had opposite effects both within and between communities. The observed patterns can be explained by environmental homogenization under logging. Logging is biased to particular species and larger diameter at breast height, and forest patrol has been effective in decreasing logging. PMID:25561669

  12. Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia.

    PubMed

    Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

    2015-02-19

    Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in secondary dry deciduous forests. Measurements were made in 1998, 2000, 2004 and 2010, and logging, recruitment and mortality of each tree were recorded. We estimated phylogeny using rbcL and matK gene sequences and quantified phylogenetic α and β diversity. Within communities, logging decreased phylogenetic diversity, and increased overall phylogenetic clustering and terminal phylogenetic evenness. Between communities, logging increased phylogenetic similarity between evergreen and deciduous plots. On the other hand, recruitment had opposite effects both within and between communities. The observed patterns can be explained by environmental homogenization under logging. Logging is biased to particular species and larger diameter at breast height, and forest patrol has been effective in decreasing logging.

  13. Insights into gait disorders: walking variability using phase plot analysis, Huntington's disease.

    PubMed

    Collett, Johnny; Esser, Patrick; Khalil, Hanan; Busse, Monica; Quinn, Lori; DeBono, Katy; Rosser, Anne; Nemeth, Andrea H; Dawes, Helen

    2014-09-01

    Huntington's disease (HD) is a progressive inherited neurodegenerative disorder. Identifying sensitive methodologies to quantitatively measure early motor changes have been difficult to develop. This exploratory observational study investigated gait variability and symmetry in HD using phase plot analysis. We measured the walking of 22 controls and 35 HD gene carriers (7 premanifest (PreHD)), 16 early/mid (HD1) and 12 late stage (HD2) in Oxford and Cardiff, UK. The unified Huntington's disease rating scale-total motor scores (UHDRS-TMS) and disease burden scores (DBS) were used to quantify disease severity. Data was collected during a clinical walk test (8.8 or 10 m) using an inertial measurement unit attached to the trunk. The 6 middle strides were used to calculate gait variability determined by spatiotemporal parameters (co-efficient of variation (CoV)) and phase plot analysis. Phase plots considered the variability in consecutive wave forms from vertical movement and were quantified by SDA (spatiotemporal variability), SDB (temporal variability), ratio ∀ (ratio SDA:SDB) and Δangleβ (symmetry). Step time CoV was greater in manifest HD (p<0.01, both manifest groups) than controls, as was stride length CoV for HD2 (p<0.01). No differences were found in spatiotemporal variability between PreHD and controls (p>0.05). Phase plot analysis identified differences between manifest HD and controls for SDB, Ratio ∀ and Δangle (all p<0.01, both manifest groups). Furthermore Ratio ∀ was smaller in PreHD compared with controls (p<0.01). Ratio ∀ also produced the strongest correlation with UHDRS-TMS (r=-0.61, p<0.01) and was correlated with DBS (r=-0.42, p=0.02). Phase plot analysis may be a sensitive method of detecting gait changes in HD and can be performed quickly during clinical walking tests.

  14. Computer program documentation: ODRC demand plotting program user's guide

    NASA Technical Reports Server (NTRS)

    Damico, S. J.

    1980-01-01

    The Orbital Data Reduction Center (ODRC) Demand Plotting Program provides the user with three main options, each of which provides the additional option of generating a numerical summary and/or plots for the Measurement ID's (MID) on the Measurement Node Correlation (MNC) list. Option one reads MID data from word addressable ODRC files, stores the data on a temporary file, and uses it to build the numerical summary and/or plots, according to user input instructions. Options two and three read MID data from a word addressable ODRC file and component node data from a word addressable HSTFLO or HISTRY file. The component node data is used to calculate a predicted MID. Then, for option two, the MID and predicted MID data is used to generate a numerical summary and/or plots. For option three, the component node data itself is used in generating the numerical summary and/or plots. The numerical summary is sent to the BRKPT file, RELOCOK, and can be viewed after the execution of the program using the edit mode to find the desired section of the summary.

  15. Agricultural application of SWECS

    NASA Astrophysics Data System (ADS)

    Nelson, V.

    Principal applications of wind energy for agriculture are (1) farmstead power, mainly electrical, (2) building heating, (3) irrigation pumping, (4) product storage and processing, (5) hot water for residences and dairies, and (6) associated industries of agribusiness such as feedlots, fertilizer elevators, greenhouses, etc. Field experiments show that wind energy is a viable alternative, however, reliability and maintenance are still major problems. Test results of the various experiments are described.

  16. NPLOT: an Interactive Plotting Program for NASTRAN Finite Element Models

    NASA Technical Reports Server (NTRS)

    Jones, G. K.; Mcentire, K. J.

    1985-01-01

    The NPLOT (NASTRAN Plot) is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models. Developed at NASA's Goddard Space Flight Center, the program provides flexible element selection and grid point, ASET and SPC degree of freedom labelling. It is easy to use and provides a combination menu and command driven user interface. NPLOT also provides very fast hidden line and haloed line algorithms. The hidden line algorithm in NPLOT proved to be both very accurate and several times faster than other existing hidden line algorithms. A fast spatial bucket sort and horizon edge computation are used to achieve this high level of performance. The hidden line and the haloed line algorithms are the primary features that make NPLOT different from other plotting programs.

  17. Hydrological heterogeneity in agricultural riparian buffer strips

    NASA Astrophysics Data System (ADS)

    Hénault-Ethier, Louise; Larocque, Marie; Perron, Rachel; Wiseman, Natalie; Labrecque, Michel

    2017-03-01

    Riparian buffer strips (RBS) may protect surface water and groundwater in agricultural settings, although their effectiveness, observed in field-scale studies, may not extend to a watershed scale. Hydrologically-controlled leaching plots have often shown RBS to be effective at buffering nutrients and pesticides, but uncontrolled field studies have sometimes suggested limited effectiveness. The limited RBS effectiveness may be explained by the spatiotemporal hydrological heterogeneity near non-irrigated fields. This hypothesis was tested in conventional corn and soy fields in the St. Lawrence Lowlands of southern Quebec (Canada), where spring melt brings heavy and rapid runoff, while summer months are hot and dry. One field with a mineral soil (Saint-Roch-de-l'Achigan) and another with an organic-rich soil (Boisbriand) were equipped with passive runoff collectors, suction cup lysimeters, and piezometers placed before and after a 3 m-wide RBS, and monitored from 2011 to 2014. Soil topography of the RBS was mapped to a 1 cm vertical precision and a 50 cm sampling grid. On average, surface runoff intersects the RBS perpendicularly, but is subject to substantial local heterogeneity. Groundwater saturates the root zones, but flows little at the time of snowmelt. Groundwater flow is not consistently perpendicular to the RBS, and may reverse, flowing from stream to field under low water flow regimes with stream-aquifer connectivity, thus affecting RBS effectiveness calculations. Groundwater flow direction can be influenced by stratigraphy, local soil hydraulic properties, and historical modification of the agricultural stream beds. Understanding the spatiotemporal heterogeneity of surface and groundwater flows is essential to correctly assess the effectiveness of RBS in intercepting agro-chemical pollution. The implicit assumption that water flows across vegetated RBS, from the field to the stream, should always be verified.

  18. A&M. Radioactive parts security storage area, TAN647 and TAN648. Plot ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. Radioactive parts security storage area, TAN-647 and TAN-648. Plot plan, fencing details. Relationship to hot shop and railroad turntable. Ralph M. Parsons 1480-7-ANP/GE-3-102. Date: November 19958. Approved by INEEL Classification Office for public release. INEEL index no. 034-0100-00-693-107447 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  19. Jury rejects plea that AIDS dementia prompted murder plot.

    PubMed

    1998-06-12

    [Name removed], a defendant with AIDS-related dementia, was found legally sane by a Contra Costa County jury when he plotted to have his ex-lover killed for $860,000 in insurance money. No testimony was presented showing that the defendant was insane at the time he plotted the murder. A videotape showed the defendant giving $2,500 to an undercover police officer to hire the officer for the murder. The defendant was convicted and sentenced to 25 years to life in prison. He is currently refusing all AIDS medications, and is not expected to live longer than 18 months.

  20. GRAPH III: a digitizing and graph plotting program

    SciTech Connect

    Selleck, C.B.

    1986-03-01

    GRAPH is an interactive program that allows the user to perform two functions. The first is to plot two dimensional graphs and the second is to digitize graphs or plots to create data files of points. The program is designed to allow the user to get results quickly and easily. It is written in RATIV (a FORTRAN preprocessor) and is currently in use at Sandia under VMS on a VAX computer and CTSS on a Cray supercomputer. The program provides graphical output through all of the Sandia Virtual Device Interface (VDI) graphics devices. 2 refs., 3 figs., 3 tabs.

  1. Facilitated gate setting by sequential dot plot scanning.

    PubMed

    Günther, Susanne; Müller, Susann

    2015-07-01

    Microbial communities comprising thousands of unknown organisms can be studied flow cytometrically by applying just one fluorescent parameter and using scatter characteristics of cells. Resulting 2D-plots need to represent high numbers of cells to detect the many subcommunities, even rare ones that might be present in the sample. Evaluation of such data can be faulty and subjective due to the low number of parameters available for data discrimination and the high numbers of overlaying events. Here, we describe a procedure that helps to evaluate such data using facilitated gate setting by sequential dot-plot scanning.

  2. On the Nature of Earth-Mars Porkchop Plots

    NASA Technical Reports Server (NTRS)

    Woolley, Ryan C.; Whetsel, Charles W.

    2013-01-01

    Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

  3. Design criteria and eigensequence plots for satellite computed tomography

    NASA Technical Reports Server (NTRS)

    Wahba, G.

    1983-01-01

    The use of the degrees of freedom for signal is proposed as a design criteria for comparing different designs for satellite and other measuring systems. It is also proposed that certain eigensequence plots be examined at the design stage along with appropriate estimates of the parameter lambda playing the role of noise to signal ratio. The degrees of freedom for signal and the eigensequence plots may be determined using prior information in the spectral domain which is presently available along with a description of the system, and simulated data for estimating lambda. This work extends the 1972 work of Weinreb and Crosby.

  4. Recurrence plots and recurrence quantification analysis of human motion data

    NASA Astrophysics Data System (ADS)

    Josiński, Henryk; Michalczuk, Agnieszka; Świtoński, Adam; Szczesna, Agnieszka; Wojciechowski, Konrad

    2016-06-01

    The authors present exemplary application of recurrence plots, cross recurrence plots and recurrence quantification analysis for the purpose of exploration of experimental time series describing selected aspects of human motion. Time series were extracted from treadmill gait sequences which were recorded in the Human Motion Laboratory (HML) of the Polish-Japanese Academy of Information Technology in Bytom, Poland by means of the Vicon system. Analysis was focused on the time series representing movements of hip, knee, ankle and wrist joints in the sagittal plane.

  5. Monitoring changes in soil carbon resulting from intensive production, a non-traditional agricultural methodology.

    SciTech Connect

    Dwyer, Brian P.

    2013-03-01

    New Mexico State University and a group of New Mexico farmers are evaluating an innovative agricultural technique they call Intensive Production (IP). In contrast to conventional agricultural practice, IP uses intercropping, green fallowing, application of soil amendments and soil microbial inocula to sequester carbon as plant biomass, resulting in improved soil quality. Sandia National Laboratories role was to identify a non-invasive, cost effective technology to monitor soil carbon changes. A technological review indicated that Laser Induced Breakdown Spectroscopy (LIBS) best met the farmers objectives. Sandia partnered with Los Alamos National Laboratory (LANL) to analyze farmers test plots using a portable LIBS developed at LANL. Real-time LIBS field sample analysis was conducted and grab samples were collected for laboratory comparison. The field and laboratory results correlated well implying the strong potential for LIBS as an economical field scale analytical tool for analysis of elements such as carbon, nitrogen, and phosphate.

  6. The role of ethnobotanical skills and agricultural labor in forest clearance: evidence from the Bolivian Amazon.

    PubMed

    Reyes-García, Victoria; Pascual, Unai; Vadez, Vincent; Huanca, Tomás

    2011-05-01

    Research on the benefits of local ecological knowledge for conservation lacks empirical data on the pathways through which local knowledge might affect natural resources management. We test whether ethnobotanical skills, a proxy for local ecological knowledge, are associated to the clearance of forest through their interaction with agricultural labor. We collected information from men in a society of gatherers-horticulturalist, the Tsimane' (Bolivia). Data included a baseline survey, a survey of ethnobotanical skills (n = 190 men), and two surveys on agricultural labor inputs (n = 466 plots). We find a direct effect of ethnobotanical skills in lowering the extent of forest cleared in fallow but not in old-growth forest. We also find that the interaction between ethnobotanical skills and labor invested in shifting cultivation has opposite effects depending on whether the clearing is done in old-growth or fallow forest. We explain the finding in the context of Tsimane' increasing integration to the market economy.

  7. Study Guide for TCT in Agriculture.

    ERIC Educational Resources Information Center

    Sailors, Robert A.

    This study guide was specifically designed for individuals preparing to take the Georgia Teacher Certification Test (TCT) in agriculture. The agriculture test was developed by the National Evaluation Systems, Inc. and educators in Georgia. The test covers 13 subareas: (1) plant science; (2) crop management; (3) animal science; (4) livestock and…

  8. Effects of Plotting a Second Observer's Data on A-B-A-B Graphs When Observer Disagreement Is Present

    ERIC Educational Resources Information Center

    Ledford, Jennifer R.; Wolery, Mark

    2013-01-01

    Plotting data from a second observer have been suggested as an alternative to presenting only mean agreement and ranges across sessions. One argument against this method of reporting is that plotting these data would not change analysis decisions by persons analyzing graphs. To empirically test this argument, we asked graduate students to analyze…

  9. 7 CFR 205.670 - Inspection and testing of agricultural products to be sold or labeled as “100 percent organic...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... sold or labeled as â100 percent organic,â âorganic,â or âmade with organic (specified ingredients or... AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Administrative... products to be sold or labeled as “100 percent organic,” “organic,” or “made with organic...

  10. 7 CFR 205.670 - Inspection and testing of agricultural products to be sold or labeled as “100 percent organic...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... sold or labeled as â100 percent organic,â âorganic,â or âmade with organic (specified ingredients or... AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Administrative... products to be sold or labeled as “100 percent organic,” “organic,” or “made with organic...

  11. Establishing a Corky Ringspot Disease Plot for Research Purposes

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A method to establish two experimental corky ringspot disease (CRS) plots that had no prior CRS history is described. CRS is a serious disease of potato in the Pacific Northwest USA, caused by tobacco rattle virus (TRV) and transmitted primarily by Paratrichodorus allius. ‘Samsun NN’ tobacco seedli...

  12. Probability plotting position formulas for flood records with historical information

    NASA Astrophysics Data System (ADS)

    Hirsch, Robert M.

    1987-12-01

    For purposes of evaluating fitted flood frequency distributions or for purposes of estimating distributions directly from plots of flood peaks versus exceedance probabilities (either by subjective or objective techniques), one needs a probability plotting position formula which can be applied to all of the flood data available: both systematic and historic floods. Some of the formulas in use are simply extensions of existing formulas (such as Hazen and Weibull) used on systematic flood records. New plotting position formulas proposed by Hirsch and Stedinger (1986) and in this paper are based on a recognition that the flood data arises from partially censored sampling of the flood record. The theoretical appropriateness, bias in probability and bias in discharge of the various plotting position formulas are considered. The methods are compared in terms of their effects on flood frequency estimation when an objective curve-fitting method of estimation is employed. Consideration is also given to the correct interpretation of the historical record length and the effect of incorrectly assuming that record length equals the time since the first known historical flood. This assumption is employed in many flood frequency studies and may result in a substantial bias in estimated design flood magnitudes.

  13. Omitted Variable Sensitivity Analysis with the Annotated Love Plot

    ERIC Educational Resources Information Center

    Hansen, Ben B.; Fredrickson, Mark M.

    2014-01-01

    The goal of this research is to make sensitivity analysis accessible not only to empirical researchers but also to the various stakeholders for whom educational evaluations are conducted. To do this it derives anchors for the omitted variable (OV)-program participation association intrinsically, using the Love plot to present a wide range of…

  14. Female Union Band Cemetery, 1975 Plot Plan Mount Zion ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Female Union Band Cemetery, 1975 Plot Plan - Mount Zion Cemetery/ Female Union Band Cemetery, Bounded by 27th Street right-of-way N.W. (formerly Lyons Mill Road), Q Street N.W., & Mill Road N.W., Washington, District of Columbia, DC

  15. Mount Zion Cemetery, 1975 Plot Plan Mount Zion Cemetery/ ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Mount Zion Cemetery, 1975 Plot Plan - Mount Zion Cemetery/ Female Union Band Cemetery, Bounded by 27th Street right-of-way N.W. (formerly Lyons Mill Road), Q Street N.W., & Mill Road N.W., Washington, District of Columbia, DC

  16. Plotting and Analyzing: Graphing Calculators for Social Inquiry.

    ERIC Educational Resources Information Center

    Garofalo, Joe; Bennett, Clifford; Mason, Cheryl

    1999-01-01

    Illustrates how graphing calculators can be used to address the knowledge and skills promoted by the National Council for the Social Studies (NCSS) and other educational organizations. Focuses on plotting capability and facilitating various types of data and information analysis. (CMK)

  17. 1. OVERVIEW, LOOKING WEST, TOMBSTONES, STATUES AND GRAVE PLOTS OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. OVERVIEW, LOOKING WEST, TOMBSTONES, STATUES AND GRAVE PLOTS OF THE DUCHOCK, MOSKO, BENKO AND OTHER FAMILIES OF THIS FORMER COAL MINING AREA SETTLED BY CZECH AND SLAVIC MINERS IN THE 1880S AND 1890S - St. Michael's Cemetery, Brookside Road, Brookside, Jefferson County, AL

  18. Meaning-Making through Narrative: On Not Losing the Plot

    ERIC Educational Resources Information Center

    Martin, Terry

    2009-01-01

    This article explores the process of meaning-making from within the "narrative" mode and in particular considers the difficulty or even impossibility, in certain kinds of organisational and social situations, of constructing viable narratives. This experience is sometimes referred to as "losing the plot", hence the subtitle of…

  19. 140. ARAIII Grading and drainage plan showing plot plan, including ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    140. ARA-III Grading and drainage plan showing plot plan, including berms around waste storage tank and fuel oil storage tank. Aerojet-general 880-area-GCRE-101-1. Date: February 1958. Ineel index code no. 063-0101-00-013-102507. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  20. A Guided Inquiry on Hubble Plots and the Big Bang

    NASA Astrophysics Data System (ADS)

    Forringer, Ted

    2014-04-01

    In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the first time. The first challenge is in understanding and interpreting Hubble plots. The second is that some of our students have religious or cultural objections to the concept of a "Big Bang" or a universe that is billions of years old. This paper presents a guided inquiry exercise that was created with the goal of introducing students to Hubble plots and giving them the opportunity to discover for themselves why we believe our universe started with an explosion billions of years ago. The exercise is designed to be completed before the topics are discussed in the classroom. We did the exercise during a one hour and 45 minute "lab" time and it was done in groups of three or four students, but it would also work as an individual take-home assignment.

  1. Temporal MDS Plots for Analysis of Multivariate Data.

    PubMed

    Jäckle, Dominik; Fischer, Fabian; Schreck, Tobias; Keim, Daniel A

    2016-01-01

    Multivariate time series data can be found in many application domains. Examples include data from computer networks, healthcare, social networks, or financial markets. Often, patterns in such data evolve over time among multiple dimensions and are hard to detect. Dimensionality reduction methods such as PCA and MDS allow analysis and visualization of multivariate data, but per se do not provide means to explore multivariate patterns over time. We propose Temporal Multidimensional Scaling (TMDS), a novel visualization technique that computes temporal one-dimensional MDS plots for multivariate data which evolve over time. Using a sliding window approach, MDS is computed for each data window separately, and the results are plotted sequentially along the time axis, taking care of plot alignment. Our TMDS plots enable visual identification of patterns based on multidimensional similarity of the data evolving over time. We demonstrate the usefulness of our approach in the field of network security and show in two case studies how users can iteratively explore the data to identify previously unknown, temporally evolving patterns.

  2. Surveillance of Site A and Plot M report for 2010.

    SciTech Connect

    Golchert, N. W.

    2011-05-31

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2010 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  3. Surveillance of Site A and Plot M, Report for 2009.

    SciTech Connect

    Golchert, N. W.

    2010-04-21

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2009 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  4. DON'T BE TRICKED BY YOUR INTEGRATED RATE PLOT!

    EPA Science Inventory

    Reaction order can be determined from kinetic data in a variety of ways. Two methods commonly employed are comparison of initial rates (while varying reactant concentration) and plotting integrated rate expressions. Both of these are introduced in general and physical chemistry t...

  5. Temporal Distributions of Problem Behavior Based on Scatter Plot Analysis.

    ERIC Educational Resources Information Center

    Kahng, SungWoo; Iwata, Brian A.; Fischer, Sonya M.; Page, Terry J.; Treadwell, Kimberli R. H.; Williams, Don E.; Smith, Richard G.

    1998-01-01

    A large-scale analysis was conducted of problem behavior by observing 20 individuals living in residential facilities. Data were converted into scatter plot formats. When the data were transformed into aggregate "control charts," 12 of 15 sets of data revealed 30-minute intervals during which problem behavior was more likely to occur.…

  6. Linear titration plots for polyfunctional weak acids and bases.

    PubMed

    Midgley, D; McCallum, C

    1976-04-01

    Procedures are derived for obtaining the equivalence volumes in the potentiometric titrations of polyfunctional weak acids and weak bases by a linear titration plot method. The effect of errors in the equilibrium constants on the accuracy is considered. A Fortran program is available to do the calculations.

  7. Polar plot representation of time-resolved fluorescence.

    PubMed

    Eichorst, John Paul; Wen Teng, Kai; Clegg, Robert M

    2014-01-01

    Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

  8. Igloo-Plot: a tool for visualization of multidimensional datasets.

    PubMed

    Kuntal, Bhusan K; Ghosh, Tarini Shankar; Mande, Sharmila S

    2014-01-01

    Advances in science and technology have resulted in an exponential growth of multivariate (or multi-dimensional) datasets which are being generated from various research areas especially in the domain of biological sciences. Visualization and analysis of such data (with the objective of uncovering the hidden patterns therein) is an important and challenging task. We present a tool, called Igloo-Plot, for efficient visualization of multidimensional datasets. The tool addresses some of the key limitations of contemporary multivariate visualization and analysis tools. The visualization layout, not only facilitates an easy identification of clusters of data-points having similar feature compositions, but also the 'marker features' specific to each of these clusters. The applicability of the various functionalities implemented herein is demonstrated using several well studied multi-dimensional datasets. Igloo-Plot is expected to be a valuable resource for researchers working in multivariate data mining studies. Igloo-Plot is available for download from: http://metagenomics.atc.tcs.com/IglooPlot/.

  9. Non-parametric and least squares Langley plot methods

    NASA Astrophysics Data System (ADS)

    Kiedron, P. W.; Michalsky, J. J.

    2016-01-01

    Langley plots are used to calibrate sun radiometers primarily for the measurement of the aerosol component of the atmosphere that attenuates (scatters and absorbs) incoming direct solar radiation. In principle, the calibration of a sun radiometer is a straightforward application of the Bouguer-Lambert-Beer law V = V0e-τ ṡ m, where a plot of ln(V) voltage vs. m air mass yields a straight line with intercept ln(V0). This ln(V0) subsequently can be used to solve for τ for any measurement of V and calculation of m. This calibration works well on some high mountain sites, but the application of the Langley plot calibration technique is more complicated at other, more interesting, locales. This paper is concerned with ferreting out calibrations at difficult sites and examining and comparing a number of conventional and non-conventional methods for obtaining successful Langley plots. The 11 techniques discussed indicate that both least squares and various non-parametric techniques produce satisfactory calibrations with no significant differences among them when the time series of ln(V0)'s are smoothed and interpolated with median and mean moving window filters.

  10. Process Waste Assessment for the Plotting and Digitizing Support Laboratory

    SciTech Connect

    Phillips, N.M.

    1994-04-01

    This Process Waste Assessment was conducted to evaluate the Plotting and Digitizing Support Laboratory, located in Building 913, Room 157. It documents the processes, identifies the hazardous chemical waste streams generated by these processes, recommends possible ways to minimize waste, and serves as a reference for future assessments of this facility.

  11. A Simple Interactive Software Package for Plotting, Animating, and Calculating

    ERIC Educational Resources Information Center

    Engelhardt, Larry

    2012-01-01

    We introduce a new open source (free) software package that provides a simple, highly interactive interface for carrying out certain mathematical tasks that are commonly encountered in physics. These tasks include plotting and animating functions, solving systems of coupled algebraic equations, and basic calculus (differentiating and integrating…

  12. 167. ARAIII Plot plan as of 1986. Shows most of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    167. ARA-III Plot plan as of 1986. Shows most of original army buildings in addition to location for buildings ARA-621 and ARA-630, which were built in 1969 after army program had been canceled. Date: March 1986. Ineel index code no. 063-0100-00-220-421241. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  13. A Conductive Gel for the Plotting of Equipotential Lines

    ERIC Educational Resources Information Center

    Elizalde-Torres, J.; González-Cardel, M.; Vega-Murguía, E. J.; Castillo-González, I.; Rodríguez-Nava, M.

    2015-01-01

    This paper presents the development of a conductive gel that can be used to measure the electrical potential differences on its surface, and has enough consistency to plot equipotential lines. It has a gelation time of less than 10 min, and is suitable for implementing learning experiences in a physics teaching laboratory in a 90 min session. To…

  14. Developing Box Plots While Navigating the Maze of Data Representations

    ERIC Educational Resources Information Center

    Duncan, Bruce; Fitzallen, Noleine

    2013-01-01

    The learning sequence described in this article was developed to provide students with a demonstration of the development of box plots from authentic data as an illustration of the advantages gained from using multiple forms of data representation. The sequence follows an authentic process that starts with a problem to which data representations…

  15. Box-and-Whisker Plots Applied to Food Chemistry

    ERIC Educational Resources Information Center

    Ferreira, Joao E. V.; Miranda, Ricardo M.; Figueiredo, Antonio F.; Barbosa, Jardel P.; Brasil, Edykarlos M.

    2016-01-01

    Box-and-whisker plots or simply boxplots are powerful graphical representations that give an overview of a data set. In this work five different examples illustrate the applications of boxplots in food chemistry. The examples involve relative sweetness of sugars and sugar alcohols with respect to sucrose, the potassium content of fruits and…

  16. Non-parametric and least squares Langley plot methods

    NASA Astrophysics Data System (ADS)

    Kiedron, P. W.; Michalsky, J. J.

    2015-04-01

    Langley plots are used to calibrate sun radiometers primarily for the measurement of the aerosol component of the atmosphere that attenuates (scatters and absorbs) incoming direct solar radiation. In principle, the calibration of a sun radiometer is a straightforward application of the Bouguer-Lambert-Beer law V=V>/i>0e-τ ·m, where a plot of ln (V) voltage vs. m air mass yields a straight line with intercept ln (V0). This ln (V0) subsequently can be used to solve for τ for any measurement of V and calculation of m. This calibration works well on some high mountain sites, but the application of the Langley plot calibration technique is more complicated at other, more interesting, locales. This paper is concerned with ferreting out calibrations at difficult sites and examining and comparing a number of conventional and non-conventional methods for obtaining successful Langley plots. The eleven techniques discussed indicate that both least squares and various non-parametric techniques produce satisfactory calibrations with no significant differences among them when the time series of ln (V0)'s are smoothed and interpolated with median and mean moving window filters.

  17. DISSPLA plotting routines for the G-189A EC/LS computer program

    NASA Technical Reports Server (NTRS)

    Simpson, C. D.

    1982-01-01

    Data from a G-189A execution is formatted and plotted. The plotting may be done at the time of execution of the program. DISSPLA plot packages are used. The user has the choice of FR80 or TEKTRONIX output.

  18. SEGY to ASCII Conversion and Plotting Program 2.0

    USGS Publications Warehouse

    Goldman, Mark R.

    2005-01-01

    INTRODUCTION SEGY has long been a standard format for storing seismic data and header information. Almost every seismic processing package can read and write seismic data in SEGY format. In the data processing world, however, ASCII format is the 'universal' standard format. Very few general-purpose plotting or computation programs will accept data in SEGY format. The software presented in this report, referred to as SEGY to ASCII (SAC), converts seismic data written in SEGY format (Barry et al., 1975) to an ASCII data file, and then creates a postscript file of the seismic data using a general plotting package (GMT, Wessel and Smith, 1995). The resulting postscript file may be plotted by any standard postscript plotting program. There are two versions of SAC: one version for plotting a SEGY file that contains a single gather, such as a stacked CDP or migrated section, and a second version for plotting multiple gathers from a SEGY file containing more than one gather, such as a collection of shot gathers. Note that if a SEGY file has multiple gathers, then each gather must have the same number of traces per gather, and each trace must have the same sample interval and number of samples per trace. SAC will read several common standards of SEGY data, including SEGY files with sample values written in either IBM or IEEE floating-point format. In addition, utility programs are present to convert non-standard Seismic Unix (.sux) SEGY files and PASSCAL (.rsy) SEGY files to standard SEGY files. SAC allows complete user control over all plotting parameters including label size and font, tick mark intervals, trace scaling, and the inclusion of a title and descriptive text. SAC shell scripts create a postscript image of the seismic data in vector rather than bitmap format, using GMT's pswiggle command. Although this can produce a very large postscript file, the image quality is generally superior to that of a bitmap image, and commercial programs such as Adobe Illustrator

  19. Plot shape effects on plant species diversity measurements

    USGS Publications Warehouse

    Keeley, Jon E.; Fotheringham, C.J.

    2005-01-01

    Abstract. Question: Do rectangular sample plots record more plant species than square plots as suggested by both empirical and theoretical studies?Location: Grasslands, shrublands and forests in the Mediterranean-climate region of California, USA.Methods: We compared three 0.1-ha sampling designs that differed in the shape and dispersion of 1-m2 and 100-m2 nested subplots. We duplicated an earlier study that compared the Whittaker sample design, which had square clustered subplots, with the modified Whittaker design, which had dispersed rectangular subplots. To sort out effects of dispersion from shape we used a third design that overlaid square subplots on the modified Whittaker design. Also, using data from published studies we extracted species richness values for 400-m2 subplots that were either square or 1:4 rectangles partially overlaid on each other from desert scrub in high and low rainfall years, chaparral, sage scrub, oak savanna and coniferous forests with and without fire.Results: We found that earlier empirical reports of more than 30% greater richness with rectangles were due to the confusion of shape effects with spatial effects, coupled with the use of cumulative number of species as the metric for comparison. Average species richness was not significantly different between square and 1:4 rectangular sample plots at either 1- or 100-m2. Pairwise comparisons showed no significant difference between square and rectangular samples in all but one vegetation type, and that one exhibited significantly greater richness with squares. Our three intensive study sites appear to exhibit some level of self-similarity at the scale of 400 m2, but, contrary to theoretical expectations, we could not detect plot shape effects on species richness at this scale.Conclusions: At the 0.1-ha scale or lower there is no evidence that plot shape has predictable effects on number of species recorded from sample plots. We hypothesize that for the mediterranean

  20. Surveillance of Site A and Plot M. Report for 1996

    SciTech Connect

    Golchert, N.W.

    1997-05-01

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for 1996 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  1. Soil conservation under climate change: use of recovery biomasses on agricultural soil subjected to the passage of agricultural machinery

    NASA Astrophysics Data System (ADS)

    Bergonzoli, S.; Beni, C.; Servadio, P.

    2012-04-01

    Biomass administration is a good practice to preserve the soil fertility in climate change conditions. A test regarding the use of compost derived by wine distillation residues was conducted in the coastal area sited west of Rome, on a sandy soil in continuous cropping with carrot, two cycles per year, with a consequent deep environmental impact. The soil was fertilized with different systems: T = unfertilized soil; F = fertigation 200 kg N ha-1; FC = fertigation 100 kg N ha-1 plus half agronomic dose of compost 4 t ha-1; C2 = double compost dose 16 t ha-1; C4 = quadruple compost dose 32 t ha-1. The functional qualities of the soil, subjected to the passage of agricultural machineries, were determined through the following parameters: bulk density, shear strength, water infiltration rate, organic matter and nitrogen content, cation exchange capacity. At the summer harvest, yield of carrots, their sugar content, firmness and nutrients concentration were determined. The plots only amended (C2 and C4), compared to other treatments, presented lower bulk density (1.36 and 1.28 Mg m-3 respectively), higher shear strength (9 and 8 kPa respectively), as well as increased hydraulic conductivity. In these treatments (C2 and C4), in addition, occurred a higher content of organic matter (0.95 and 1.07% respectively) and nitrogen (0.11 and 0.12% respectively) and increased CEC (541 and 556 respectively) respect to the T treatment that was 521 meq 100g-1. In plots T and F, the organic matter content was reduced at the end of the field test. The yield of carrots increased in FC, C2, and C4, compared to the other treatments. In plots C4, however, morphological changes were induced in approximately 30% of tap-roots, due to the excessive compost dose. In treatments C2 and C4 was observed a reduction of the concentration of Na in the roots, as opposed to the higher concentration of Ca and K and trace elements. The administration of compost has also induced the increase of soluble

  2. Vocational Agriculture Handbook for Agriculture Cooperative Training.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This handbook was designed to assist school administrators, vocational administrators, vocational agricultural teachers, and area consultants of vocational agriculture in developing, implementing, and improving an agricultural cooperative training program (especially in Texas). The handbook, which presents information in a narrative format,…

  3. Agricultural Spraying

    NASA Technical Reports Server (NTRS)

    1986-01-01

    AGDISP, a computer code written for Langley by Continuum Dynamics, Inc., aids crop dusting airplanes in targeting pesticides. The code is commercially available and can be run on a personal computer by an inexperienced operator. Called SWA+H, it is used by the Forest Service, FAA, DuPont, etc. DuPont uses the code to "test" equipment on the computer using a laser system to measure particle characteristics of various spray compounds.

  4. Ascaris and hookworm transmission in preschool children in rural Panama: role of subsistence agricultural activities.

    PubMed

    Krause, Rachel J; Koski, Kristine G; Pons, Emérita; Sinisterra, Odalis; Scott, Marilyn E

    2016-07-01

    This longitudinal study explored whether aspects of subsistence agriculture were associated with presence and intensity of Ascaris and hookworm in preschool children in rural Panama. Questionnaires were used to collect data on household socio-demographics, child exposure to agriculture and household agricultural practices. Stool samples were collected from children (6 months-5 years) at 3 time points, with albendazole administered after each to clear infections, resulting in 1 baseline and 2 reinfection measures. A novel Agricultural Activity Index (AAI) was developed using principal components analysis to measure the intensity of household agricultural practices. Zero-inflated negative binomial regression models revealed baseline hookworm egg counts were higher if children went to the agricultural plot and if the plot was smaller. Baseline and reinfection Ascaris egg counts were higher if children went to the plot and households had higher AAI, and higher at baseline if the plot was smaller. Caregiver time in the plot was negatively associated with baseline Ascaris egg counts, but positively associated with baseline hookworm and Ascaris reinfection egg counts. Children who spent more time playing around the home were less likely to be infected with Ascaris at baseline. We conclude that preschool child exposure to subsistence agriculture increased Ascaris and hookworm intensity.

  5. Volcano plots in hydrogen electrocatalysis - uses and abuses.

    PubMed

    Quaino, Paola; Juarez, Fernanda; Santos, Elizabeth; Schmickler, Wolfgang

    2014-01-01

    Sabatier's principle suggests, that for hydrogen evolution a plot of the rate constant versus the hydrogen adsorption energy should result in a volcano, and several such plots have been presented in the literature. A thorough examination of the data shows, that there is no volcano once the oxide-covered metals are left out. We examine the factors that govern the reaction rate in the light of our own theory and conclude, that Sabatier's principle is only one of several factors that determine the rate. With the exception of nickel and cobalt, the reaction rate does not decrease for highly exothermic hydrogen adsorption as predicted, because the reaction passes through more suitable intermediate states. The case of nickel is given special attention; since it is a 3d metal, its orbitals are compact and the overlap with hydrogen is too low to make it a good catalyst.

  6. [Eugenics, an element of the literary plots of dystopia].

    PubMed

    Baum, Ewa; Musielak, Michał

    2007-01-01

    The work presents the ideas and assumptions of eugenics, a social philosophy established in 1883 by Francis Galton, which affected the social policies of numerous European countries in the first half of the 20th century. The work shows the effect of eugenics on the literary standards of European prose in the previous century. Two outstanding dystopian novels of the 20th century, The Brave New World by Aldous Huxley and 1984 by George Orwell, situate eugenics as a permanent element of the literary plot of dystopia. Apart from the typical features of this type of novel, for example: personal narration with a trace of irony, a totalitarian state and Newspeak, eugenics is an important element of the literary plot with is aim to exclude and marginalise certain social groups. Eugenics is also one of the main social ideas criticised by both the writers.

  7. Computational study of protein secondary structure elements: Ramachandran plots revisited.

    PubMed

    Carrascoza, Francisco; Zaric, Snezana; Silaghi-Dumitrescu, Radu

    2014-05-01

    Potential energy surface (PES) were built for nineteen amino acids using density functional theory (PW91 and DFT M062X/6-311**). Examining the energy as a function of the φ/ψ dihedral angles in the allowed regions of the Ramachandran plot, amino acid groups that share common patterns on their PES plots and global minima were identified. These patterns show partial correlation with their structural and pharmacophoric features. Differences between these computational results and the experimentally noted permitted conformations of each amino acid are rationalized on the basis of attractive intra- and inter-molecular non-covalent interactions. The present data are focused on the intrinsic properties of an amino acid - an element which to our knowledge is typically ignored, as larger models are always used for the sake of similarity to real biological polypeptides.

  8. The Chymistry of "The Learned Dr Plot" (1640-96).

    PubMed

    Roos, Anna Marie

    2014-01-01

    In the seventeenth century, there were developing norms of openness in the presentation of scientific knowledge that were at odds with traditions of secrecy among chymists, particularly practitioners of chrysopoeia, or the transmutation of metals. This chapter analyzes how Dr. Robert Plot, the first professor of chymistry at Oxford, negotiated these boundaries within an institutional context. I first delineate his chymical and experimental practice, which incorporated procedures from medieval alchemical sources, particularly the Lullian corpus, as well as more novel practices from seventeenth-century chymistry. Then, I analyze how personal and institutional ambitions and economic considerations shaped to what extent Plot negotiated the boundaries between secrecy and the public dissemination of chymical knowledge.

  9. Volcano plots in hydrogen electrocatalysis – uses and abuses

    PubMed Central

    Quaino, Paola; Juarez, Fernanda; Santos, Elizabeth

    2014-01-01

    Summary Sabatier’s principle suggests, that for hydrogen evolution a plot of the rate constant versus the hydrogen adsorption energy should result in a volcano, and several such plots have been presented in the literature. A thorough examination of the data shows, that there is no volcano once the oxide-covered metals are left out. We examine the factors that govern the reaction rate in the light of our own theory and conclude, that Sabatier’s principle is only one of several factors that determine the rate. With the exception of nickel and cobalt, the reaction rate does not decrease for highly exothermic hydrogen adsorption as predicted, because the reaction passes through more suitable intermediate states. The case of nickel is given special attention; since it is a 3d metal, its orbitals are compact and the overlap with hydrogen is too low to make it a good catalyst. PMID:24991521

  10. Full scale visualization of the wing tip vortices generated by a typical agricultural aircraft

    NASA Technical Reports Server (NTRS)

    Cross, E. J., Jr.; Bridges, P. D.; Brownlee, J. A.; Livingston, W. W.

    1980-01-01

    The trajectories of the wing tip vortices of a typical agricultural aircraft were experimentally determined by flight test. A flow visualization method, similar to the vapor screen method used in wind tunnels, was used to obtain trajectory data for a range of flight speeds, airplane configurations, and wing loadings. Detailed measurements of the spanwise surface pressure distribution were made for all test points. Further, a powered 1/8 scale model of the aircraft was designed, built, and used to obtain tip vortex trajectory data under conditions similar to that of the full scale test. The effects of light wind on the vortices were demonstrated, and the interaction of the flap vortex and the tip vortex was clearly shown in photographs and plotted trajectory data.

  11. Full scale visualization of the wing tip vortices generated by a typical agricultural aircraft

    NASA Technical Reports Server (NTRS)

    Cross, E. J., Jr.; Bridges, P.; Brownlee, J. A.; Liningston, W. W.

    1980-01-01

    The trajectories of the wing tip vortices of a typical agricultural aircraft were experimentally determined by flight test. A flow visualization method, similar to the vapor screen method used in wind tunnels, was used to obtain trajectory data for a range of flight speeds, airplane configurations, and wing loadings. Detailed measurements of the spanwise surface pressure distribution were made for all test points. Further, a powered 1/8 scale model of the aircraft was designed, built, and used to obtain tip vortex trajectory data under conditions similar to that of the full-scale test. The effects of light wind on the vortices were demonstrated, and the interaction of the flap vortex and the tip vortex was clearly shown in photographs and plotted trajectory data.

  12. Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

    PubMed Central

    Mitchard, Edward T A; Feldpausch, Ted R; Brienen, Roel J W; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R; Lewis, Simon L; Lloyd, Jon; Quesada, Carlos A; Gloor, Manuel; ter Steege, Hans; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragão, Luiz E O C; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I; Cerón, Carlos E; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R C; Di Fiore, Anthony; Domingues, Tomas F; Erwin, Terry L; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N; Killeen, Tim J; Laurance, William F; Levis, Carolina; Magnusson, William E; Marimon, Beatriz S; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T; Neill, David; Núñez Vargas, Mario P; Palacios, Walter A; Parada, Alexander; Pardo Molina, Guido; Peña-Claros, Marielos; Pitman, Nigel; Peres, Carlos A; Poorter, Lourens; Prieto, Adriana; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H; Rudas, Agustin; Salomão, Rafael P; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F; Steininger, Marc K; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R; van der Heijden, Geertje M F; Vieira, Ima C G; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A; Wang, Ophelia; Zartman, Charles E; Malhi, Yadvinder; Phillips, Oliver L

    2014-01-01

    Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directly, and thus may miss significant spatial variations in forest structure. We test the stated accuracy of pantropical carbon maps using a large independent field dataset. Location Tropical forests of the Amazon basin. The permanent archive of the field plot data can be accessed at: http://dx.doi.org/10.5521/FORESTPLOTS.NET/2014_1 Methods Two recent pantropical RS maps of vegetation carbon are compared to a unique ground-plot dataset, involving tree measurements in 413 large inventory plots located in nine countries. The RS maps were compared directly to field plots, and kriging of the field data was used to allow area-based comparisons. Results The two RS carbon maps fail to capture the main gradient in Amazon forest carbon detected using 413 ground plots, from the densely wooded tall forests of the north-east, to the light-wooded, shorter forests of the south-west. The differences between plots and RS maps far exceed the uncertainties given in these studies, with whole regions over- or under-estimated by > 25%, whereas regional uncertainties for the maps were reported to be < 5%. Main conclusions Pantropical biomass maps are widely used by governments and by projects aiming to reduce deforestation using carbon offsets, but may have significant regional biases. Carbon-mapping techniques must be revised to account for the known ecological variation in tree wood density and allometry to create maps suitable for carbon accounting. The use of single relationships between tree canopy height and above-ground biomass inevitably yields large, spatially correlated errors. This presents a significant challenge to both the forest conservation and remote sensing communities

  13. 136. ARRII Plot plan as it appeared in 1980, when ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    136. ARR-II Plot plan as it appeared in 1980, when interior modifications were being prepared to remodel electrical apparatus in ARA-602 in connection with use as a research and development joining laboratory. EG&G, Idaho, Inc. 1570-ARA-II-100-1. Date: April 1980. Ineel index code no. 070-0199-00-220-159749. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

  14. Plot plan. San Bernardino Valley Union Junior College, Auditorium building. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Plot plan. San Bernardino Valley Union Junior College, Auditorium building. G. Stanley Wilson, Architect, A.I.A., Riverside, California. Sheet 1, job no. 692. Scale 1 inch to forty feet. March 27, 1936. Application no. 1446, approved by the State of California, Department of Public Works, Division of Architecture, April 22, 1936. - San Bernardino Valley College, Auditorium, 701 South Mount Vernon Avenue, San Bernardino, San Bernardino County, CA

  15. Surveillance of site A and plot M, report for 2007.

    SciTech Connect

    Golchert, N. W.; ESH /QA Oversight

    2008-03-25

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2007 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to: (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  16. Surveillance of Site A and Plot M - Report for 2005.

    SciTech Connect

    Golchert, N. W.; ESH /QA Oversight

    2006-04-10

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2005 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby handpumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the handpumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  17. Surveillance of Site A and Plot M, Report for 2008.

    SciTech Connect

    Golchert, N. W.

    2009-05-07

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2008 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  18. Surveillance of Site A and Plot M - Report for 2006.

    SciTech Connect

    Golchert, N. W.; ESH /QA Oversight

    2007-05-07

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2006 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (PlotM) to the hand pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red GateWoods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  19. Consistency of patterns in concentration-discharge plots

    USGS Publications Warehouse

    Chanat, Jeffrey G.; Rice, Karen C.; Hornberger, George M.

    2002-01-01

    Concentration-discharge (c-Q) plots have been used to infer how flow components such as event water, soil water, and groundwater mix to produce the observed episodic hydrochemical response of small catchments. Because c-Q plots are based only on observed streamflow and solute concentration, their interpretation requires assumptions about the relative volume, hydrograph timing, and solute concentration of the streamflow end-members. Evans and Davies [1998] present a taxonomy of c-Q loops resulting from three-component conservative mixing. Their analysis, based on a fixed template of end-member hydrograph volume, timing, and concentration, suggests a unique relationship between c-Q loop form and the rank order of end-member concentrations. Many catchments exhibit variability in component contributions to storm flow in response to antecedent conditions or rainfall characteristics, but the effects of such variation on c-Q relationships have not been studied systematically. Starting with a "baseline" condition similar to that assumed by Evans and Davies [1998], we use a simple computer model to characterize the variability in c-Q plot patterns resulting from variation in end-member volume, timing, and solute concentration. Variability in these three factors can result in more than one c-Q loop shape for a given rank order of end-member solute concentrations. The number of resulting hysteresis patterns and their relative frequency depends on the rank order of solute concentrations and on their separation in absolute value. In ambiguous cases the c-Q loop shape is determined by the relative "prominence" of the event water versus soil water components. This "prominence" is broadly defined as a capacity to influence the total streamflow concentration and may result from a combination of end-member volume, timing, or concentration. The modeling results indicate that plausible hydrological variability in field situations can confound the interpretation of c-Q plots, even when

  20. ACPA: automated cluster plot analysis of genotype data.

    PubMed

    Schillert, Arne; Schwarz, Daniel F; Vens, Maren; Szymczak, Silke; König, Inke R; Ziegler, Andreas

    2009-12-15

    Genome-wide association studies have become standard in genetic epidemiology. Analyzing hundreds of thousands of markers simultaneously imposes some challenges for statisticians. One issue is the problem of multiplicity, which has been compared with the search for the needle in a haystack. To reduce the number of false-positive findings, a number of quality filters such as exclusion of single-nucleotide polymorphisms (SNPs) with a high missing fraction are employed. Another filter is exclusion of SNPs for which the calling algorithm had difficulties in assigning the genotypes. The only way to do this is the visual inspection of the cluster plots, also termed signal intensity plots, but this approach is often neglected. We developed an algorithm ACPA (automated cluster plot analysis), which performs this task automatically for autosomal SNPs. It is based on counting samples that lie too close to the cluster of a different genotype; SNPs are excluded when a certain threshold is exceeded. We evaluated ACPA using 1,000 randomly selected quality controlled SNPs from the Framingham Heart Study data that were provided for the Genetic Analysis Workshop 16. We compared the decision of ACPA with the decision made by two independent readers. We achieved a sensitivity of 88% (95% CI: 81%-93%) and a specificity of 86% (95% CI: 83%-89%). In a screening setting in which one aims at not losing any good SNP, we achieved 99% (95% CI: 98%-100%) specificity and still detected every second low-quality SNP.

  1. Computer program for plotting and fairing wind-tunnel data

    NASA Technical Reports Server (NTRS)

    Morgan, H. L., Jr.

    1983-01-01

    A detailed description of the Langley computer program PLOTWD which plots and fairs experimental wind-tunnel data is presented. The program was written for use primarily on the Langley CDC computer and CALCOMP plotters. The fundamental operating features of the program are that the input data are read and written to a random-access file for use during program execution, that the data for a selected run can be sorted and edited to delete duplicate points, and that the data can be plotted and faired using tension splines, least-squares polynomial, or least-squares cubic-spline curves. The most noteworthy feature of the program is the simplicity of the user-supplied input requirements. Several subroutines are also included that can be used to draw grid lines, zero lines, axis scale values and lables, and legends. A detailed description of the program operational features and each sub-program are presented. The general application of the program is also discussed together with the input and output for two typical plot types. A listing of the program code, user-guide, and output description are presented in appendices. The program has been in use at Langley for several years and has proven to be both easy to use and versatile.

  2. Looking at large data sets using binned data plots

    SciTech Connect

    Carr, D.B.

    1990-04-01

    This report addresses the monumental challenge of developing exploratory analysis methods for large data sets. The goals of the report are to increase awareness of large data sets problems and to contribute simple graphical methods that address some of the problems. The graphical methods focus on two- and three-dimensional data and common task such as finding outliers and tail structure, assessing central structure and comparing central structures. The methods handle large sample size problems through binning, incorporate information from statistical models and adapt image processing algorithms. Examples demonstrate the application of methods to a variety of publicly available large data sets. The most novel application addresses the too many plots to examine'' problem by using cognostics, computer guiding diagnostics, to prioritize plots. The particular application prioritizes views of computational fluid dynamics solution sets on the fly. That is, as each time step of a solution set is generated on a parallel processor the cognostics algorithms assess virtual plots based on the previous time step. Work in such areas is in its infancy and the examples suggest numerous challenges that remain. 35 refs., 15 figs.

  3. Diffusional falsification of kinetic constants on Lineweaver-Burk plots.

    PubMed

    Ghim, Y S; Chang, H N

    1983-11-07

    The effect of mass transfer resistances on the Lineweaver-Burk plots in immobilized enzyme systems has been investigated numerically and with analytical approximate solutions. While Hamilton, Gardner & Colton (1974) studied the effect of internal diffusion resistances in planar geometry, our study was extended to the combined effect of internal and external diffusion in cylindrical and spherical geometries as well. The variation of Lineweaver-Burk plots with respect to the geometries was minimized by modifying the Thiele modulus and the Biot number with the shape factor. Especially for a small Biot number all the three Lineweaver-Burk plots fell on a single line. As was discussed by Hamilton et al. (1974), the curvature of the line for large external diffusion resistances was small enough to be assumed linear, which was confirmed from the two approximate solutions for large and small substrate concentrations. Two methods for obtaining intrinsic kinetic constants were proposed: First, we obtained both maximum reaction rate and Michaelis constant by fitting experimental data to a straight line where external diffusion resistance was relatively large, and second, we obtained Michaelis constant from apparent Michaelis constant from the figure in case we knew maximum reaction rate a priori.

  4. Performance characteristics of countercurrent separation in analysis of natural products of agricultural significance.

    PubMed

    Friesen, J Brent; Pauli, Guido F

    2008-01-09

    A standard test mix consisting of 21 commercially available natural products of agricultural significance, termed the GUESSmix, was employed to measure the countercurrent chromatography performance characteristics of a very popular quaternary solvent system family made up of hexane-ethyl acetate-methanol-water (HEMWat). The polarity range of the GUESSmix combined with the elution-extrusion countercurrent chromatography (EECCC) technique and the newly developed reciprocal symmetry (ReS) and reciprocal shifted symmetry (ReSS) plots allow liquid-liquid distribution ratios ( K D) to be plotted for every compound eluted on a scale of zero to infinity. It was demonstrated that 16 of the 21 GUESSmix compounds are found in the optimal range of resolution (0.25 < K(D) < 16) of at least one HEMWat solvent system. The HEMWat solvent systems represented by the ratios 4:6:5:5, 4:6:4:6, and 3:7:4:6 possess the most densely populated optimal ranges of resolution for this standard mix. ReS plots have been shown to reveal the symmetrical reversibility of the EECCC method in reference to K(D) = 1. This study lays the groundwork for evaluation and comparison of solvent system families proposed in the literature, as well as the creation of new solvent system families with desired performance characteristics.

  5. Biodiversity scales from plots to biomes with a universal species-area curve.

    PubMed

    Harte, John; Smith, Adam B; Storch, David

    2009-08-01

    Classic theory predicts species richness scales as the quarter-power of area, yet species-area relationships (SAR) vary widely depending on habitat, taxa, and scale range. Because power-law SAR are used to predict species loss under habitat loss, and to scale species richness from plots to biomes, insight into the wide variety of observed SAR and the conditions under which power-law behavior should be observed is needed. Here we derive from the maximum entropy principle, a new procedure for upscaling species richness data from small census plots to larger areas, and test empirically, using multiple data sets, the prediction that up to an overall scale displacement, nested SAR lie along a universal curve, with average abundance per species at each scale determining the local slope of the curve. Power-law behaviour only arises in the limit of increasing average abundance, and in that limit, the slope approaches zero, not (1/4). An extrapolation of tree species richness in the Western Ghats to biome scale (60,000 km(2)) using only census data at plot scale ((1/4) ha) is presented to illustrate the potential for applications of our theory.

  6. SOFEPL: A Plotting Postprocessor for ’SOFE’ User’s Manual.

    DTIC Science & Technology

    1981-11-01

    area General KPLUSDWork List of plots using Area IPLUSD current run KT (created in PLTNED) PLOT IPlot 1 IA(KLPTP+ 2-1) A AData Area PLOT 2Plot 2 IA...reasons: computer turn-around times for big runs are prohibitively long; a short preliminary evalu- ation of performance is needed before a lot of

  7. ResidPlots-2: Computer Software for IRT Graphical Residual Analyses

    ERIC Educational Resources Information Center

    Liang, Tie; Han, Kyung T.; Hambleton, Ronald K.

    2009-01-01

    This article discusses the ResidPlots-2, a computer software that provides a powerful tool for IRT graphical residual analyses. ResidPlots-2 consists of two components: a component for computing residual statistics and another component for communicating with users and for plotting the residual graphs. The features of the ResidPlots-2 software are…

  8. Biomonitoring with Micronuclei Test in Buccal Cells of Female Farmers and Children Exposed to Pesticides of Maneadero Agricultural Valley, Baja California, Mexico

    PubMed Central

    Castañeda-Yslas, Idalia Jazmin; Arellano-García, María Evarista; García-Zarate, Marco Antonio; Ruíz-Ruíz, Balam; Zavala-Cerna, María Guadalupe; Torres-Bugarín, Olivia

    2016-01-01

    Feminization of the agricultural labor is common in Mexico; these women and their families are vulnerable to several health risks including genotoxicity. Previous papers have presented contradictory information with respect to indirect exposure to pesticides and DNA damage. We aimed to evaluate the genotoxic effect in buccal mucosa from female farmers and children, working in the agricultural valley of Maneadero, Baja California. Frequencies of micronucleated cells (MNc) and nuclear abnormalities (NA) in 2000 cells were obtained from the buccal mucosa of the study population (n = 144), divided in four groups: (1) farmers (n = 37), (2) unexposed (n = 35), (3) farmers' children (n = 34), and (4) unexposed children (n = 38). We compared frequencies of MNc and NA and fitted generalized linear models to investigate the interaction between these variables and exposition to pesticides. Differences were found between farmers and unexposed women in MNc (p < 0.0001), CC (p = 0.3376), and PN (p < 0.0001). With respect to exposed children, we found higher significant frequencies in MNc (p < 0.0001), LN (p < 0.0001), CC (p < 0.0001), and PN (p < 0.004) when compared to unexposed children. Therefore working as a farmer is a risk for genotoxic damage; more importantly indirectly exposed children were found to have genotoxic damage, which is of concern, since it could aid in future disturbances of their health. PMID:26981119

  9. Biomonitoring with Micronuclei Test in Buccal Cells of Female Farmers and Children Exposed to Pesticides of Maneadero Agricultural Valley, Baja California, Mexico.

    PubMed

    Castañeda-Yslas, Idalia Jazmin; Arellano-García, María Evarista; García-Zarate, Marco Antonio; Ruíz-Ruíz, Balam; Zavala-Cerna, María Guadalupe; Torres-Bugarín, Olivia

    2016-01-01

    Feminization of the agricultural labor is common in Mexico; these women and their families are vulnerable to several health risks including genotoxicity. Previous papers have presented contradictory information with respect to indirect exposure to pesticides and DNA damage. We aimed to evaluate the genotoxic effect in buccal mucosa from female farmers and children, working in the agricultural valley of Maneadero, Baja California. Frequencies of micronucleated cells (MNc) and nuclear abnormalities (NA) in 2000 cells were obtained from the buccal mucosa of the study population (n = 144), divided in four groups: (1) farmers (n = 37), (2) unexposed (n = 35), (3) farmers' children (n = 34), and (4) unexposed children (n = 38). We compared frequencies of MNc and NA and fitted generalized linear models to investigate the interaction between these variables and exposition to pesticides. Differences were found between farmers and unexposed women in MNc (p < 0.0001), CC (p = 0.3376), and PN (p < 0.0001). With respect to exposed children, we found higher significant frequencies in MNc (p < 0.0001), LN (p < 0.0001), CC (p < 0.0001), and PN (p < 0.004) when compared to unexposed children. Therefore working as a farmer is a risk for genotoxic damage; more importantly indirectly exposed children were found to have genotoxic damage, which is of concern, since it could aid in future disturbances of their health.

  10. Vocational Agriculture Computer Handbook.

    ERIC Educational Resources Information Center

    Kentucky State Dept. of Education, Frankfort.

    This document is a catalog of reviews of computer software suitable for use in vocational agriculture programs. The reviews were made by vocational agriculture teachers in Kentucky. The reviews cover software on the following topics: farm management, crop production, livestock production, horticulture, agricultural mechanics, general agriculture,…

  11. Handbook of Agricultural Geophysics

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Geophysical methods continue to show great promise for use in agriculture. The term “agricultural geophysics” denotes a subdiscipline of geophysics that is focused only on agricultural applications. The Handbook of Agricultural Geophysics was compiled to include a comprehensive overview of the geoph...

  12. Theme: Agricultural Literacy.

    ERIC Educational Resources Information Center

    Deeds, Jacquelyn P.; And Others

    1991-01-01

    Six theme articles attempt to define and advocate agricultural literacy, review the status of K-8 agricultural literacy programs in states, discuss an Oklahoma study of agricultural literacy, clarify the meaning of sustainable agriculture, and describe the Future Farmers of America's Food for America program for elementary students. (SK)

  13. An appropriate plot area for analyzing canopy cover and tree species richness in Zagros forests.

    PubMed

    Adeli, Kamran; Fallah, Asghar; Kooch, Yahya

    2008-01-01

    In order to make the sampling procedure more efficient and more accurate to study the tree species richness and canopy cover, the appropriate plot size was calculated in the this study. The sampling was carried out using 48 four-hectare plots, each with 13 sub-plots of different plot sizes and 7 one-hectare plots, each with 7 sub-plots. The result of this study showed that 300 ARE plot size was determined as the best area for 1-5% density class, 125 ARE plots for 5-10% class, 150 ARE for 10-25% class, 100 ARE for 25-50% class and 75 ARE plot size to sample >50% density class, in 95% confidence level. Consequently, using 100 ARE sampling plots is suggested for all density classes in central Zagros forests.

  14. Visualisation of gene expression data - the GE-biplot, the Chip-plot and the Gene-plot.

    PubMed

    Pittelkow, Yvonne E; Wilson, Susan R

    2003-01-01

    Visualisation methods for exploring microarray data are particularly important for gaining insight into data from gene expression experiments, such as those concerned with the development of an understanding of gene function and interactions. Further, good visualisation techniques are useful for outlier detection in microarray data and for aiding biological interpretation of results, as well as for presentation of overall summaries of the data. The biplot is particularly useful for the display of microarray data as both the genes and the chips can be simultaneously plotted. In this paper we describe several ordination techniques suitable for exploring microarray data, and we call these the GE-biplot, the Chip-plot and the Gene-plot. The general method is first evaluated on synthetic data simulated in accord with current biological interpretation of microarray data. Then it is applied to two well-known data sets, namely the colon data of Alon et al. (1999) and the leukaemia data of Golub et al. (1999). The usefulness of the approach for interpreting and comparing different analyses of the same data is demonstrated.

  15. Spatial and temporal variability of throughfall at the plot scale in the Italian pre-Alps

    NASA Astrophysics Data System (ADS)

    Zuecco, Giulia; Oliviero, Omar; Penna, Daniele; van Meerveld, Ilja; Hopp, Luisa; Dalla Fontana, Giancarlo; Borga, Marco

    2014-05-01

    -Whitney rank sum test, p>0.05). However, despite the smaller number of rain gauges than the buckets, the standard deviation and the coefficient of variation were typically higher for the rain gauges, likely due to their smaller area. Measured throughfall in the plot ranged between 25%-178% and between 13%-379% of the precipitation in open area for the bucket and the rain gauge measurements, respectively. This suggests an important role of dripping points in shaping plot-scale variability in throughfall, especially during small rainfall events, and underlines the greater variability in throughfall measured by the rain gauges than by the larger buckets. Throughfall as a percentage of precipitation tended to increase with increasing rainfall depth and rainfall intensity. The spatial variability of throughfall, expressed by the coefficient of variation, decreased asymptotically with increasing total rainfall and rainfall intensity. Canopy openness (quantified for buckets) was poorly correlated with the mean relative difference of throughfall and significantly correlated (r=0.58, p

  16. The value of the Thomas-plot in the diagnostic work up of anemic patients referred by general practitioners.

    PubMed

    Leers, M P G; Keuren, J F W; Oosterhuis, W P

    2010-12-01

    In patients with inflammatory conditions, diagnosing classic iron deficiency or anemia of chronic disease is challenging. In this study, we assessed the diagnostic value of the so-called Thomas'-plot [soluble transferrin receptor (sTfR)/log ferritin (sTfr/log Ferr) and the reticulocyte hemoglobin equivalent (Ret-HE)] in the anemia work up of patients referred by general practitioners. During July 2008-March 2009, 337 consecutive patients were included because of lowered Hb values. The laboratory results of the first 133 consecutive patients were used to determine the cut-off values for the diagnostic plot. The laboratory results of these patients were assessed and interpreted independently by two investigators, blinded from sTfR/log Ferr and Ret-HE values. The following 204 patients were used to test the plot in practice. In 32% of the first 133 patients, no indication of the cause of anemia could be found. However, when using the diagnostic plot in the following 204 patients, this fraction decreased to 14%. The 'Thomas'-plot is of diagnostic value for distinguishing functional iron deficiency from classic iron deficiency in a patient population referred by general practitioners.

  17. A Simple Interactive Software Package for Plotting, Animating, and Calculating

    NASA Astrophysics Data System (ADS)

    Engelhardt, Larry

    2012-10-01

    We introduce a new open source (free) software package that provides a simple, highly interactive interface for carrying out certain mathematical tasks that are commonly encountered in physics. These tasks include plotting and animating functions, solving systems of coupled algebraic equations, and basic calculus (differentiating and integrating functions of a single variable). This package was created using Easy Java Simulations (Ejs), so we will refer to it simply as Ejs-Math. It can be downloaded from the Open Source Physics collection of the comPADRE digital library.2

  18. Study of η→ηππ Dalitz plot

    NASA Astrophysics Data System (ADS)

    Dorofeev, V.; Dzheliadin, R.; Ekimov, A.; Fenyuk, A.; Gavrilov, Yu.; Gouz, Yu.; Ivashin, A.; Kabachenko, V.; Kachaev, I.; Karyukhin, A.; Khokhlov, Yu.; Konoplyannikov, A.; Konstantinov, V.; Makouski, M.; Matveev, V.; Nikolaenko, V.; Ostankov, A.; Polyakov, B.; Ryabchikov, D.; Shushkevich, S.; Solodkov, A. A.; Solodkov, A. V.; Solovianov, O.; Starchenko, E.; Zaitsev, A.; Zenin, A.

    2007-07-01

    The Dalitz plot of the η→ηππ decay is studied using the data collected with the VES spectrometer in two different exclusive reactions, πp→ηn (charge-exchange) and πN→ηπN (diffractive-like production). The η mesons from η decays were detected in the η→γγ mode. The coefficients for the matrix element squared decomposition are measured on the largest statistics of η decays reported so far; there are ∼13.6×10 and ∼6.5×10 decays after background subtraction in charge-exchange and diffractive-like production, respectively.

  19. Driver for solar cell I-V characteristic plots

    NASA Technical Reports Server (NTRS)

    Turner, G. B. (Inventor)

    1980-01-01

    A bipolar voltage ramp generator which applies a linear voltage through a resistor to a solar cell for plotting its current versus voltage (I-V) characteristic between short circuit and open circuit conditions is disclosed. The generator has automatic stops at the end points. The resistor serves the multiple purpose of providing a current sensing resistor, setting the full-scale current value, and providing a load line with a slope approximately equal to one, such that it will pass through the origin and the approximate center of the I-V curve with about equal distance from that center to each of the end points.

  20. SPERTI plot plan, showing reactor and control areas after 1956 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SPERT-I plot plan, showing reactor and control areas after 1956 addition to PER-601. Includes reactor-area buildings PER-605, -606, and -607; Terminal Building (PER-604), and control-area buildings PER-601, -602, -603 along with associated parking areas and fencing. Vicinity map shows relationship of SPERT-I to SPERT-II, SPERT-III, central facilities area (at west end of E. Portland Avenue) and Highways 20 and 26. Idaho Operations Office PER-103-IDO-1. Date: December 1955. INEEL index no. 760-0103-396-109112 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

  1. Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

    NASA Technical Reports Server (NTRS)

    Richardson, Marilou R.

    2010-01-01

    This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

  2. TrackPlot Enhancements: Support for Multiple Animal Tracks and Gyros

    DTIC Science & Technology

    2015-09-30

    CATS tags from Jeremy Goldbogen. One of the Acousondes had a fastLoc GPS. Taking advantage of this, a new method for georeferencing a psudo-track...the new CATS tag data. • The bulk of the effort so far in 2015 has been devoted to processing tag gyroscope data from OpenTag. Most of this work...OpenTags and one CATS tag. This will provide test data for the implementation of multi tag support in TrackPlot. This development is currently underway

  3. Communicating the uncertainty in estimated greenhouse gas emissions from agriculture.

    PubMed

    Milne, Alice E; Glendining, Margaret J; Lark, R Murray; Perryman, Sarah A M; Gordon, Taylor; Whitmore, Andrew P

    2015-09-01

    In an effort to mitigate anthropogenic effects on the global climate system, industrialised countries are required to quantify and report, for various economic sectors, the annual emissions of greenhouse gases from their several sources and the absorption of the same in different sinks. These estimates are uncertain, and this uncertainty must be communicated effectively, if government bodies, research scientists or members of the public are to draw sound conclusions. Our interest is in communicating the uncertainty in estimates of greenhouse gas emissions from agriculture to those who might directly use the results from the inventory. We tested six methods of communication. These were: a verbal scale using the IPCC calibrated phrases such as 'likely' and 'very unlikely'; probabilities that emissions are within a defined range of values; confidence intervals for the expected value; histograms; box plots; and shaded arrays that depict the probability density of the uncertain quantity. In a formal trial we used these methods to communicate uncertainty about four specific inferences about greenhouse gas emissions in the UK. Sixty four individuals who use results from the greenhouse gas inventory professionally participated in the trial, and we tested how effectively the uncertainty about these inferences was communicated by means of a questionnaire. Our results showed differences in the efficacy of the methods of communication, and interactions with the nature of the target audience. We found that, although the verbal scale was thought to be a good method of communication it did not convey enough information and was open to misinterpretation. Shaded arrays were similarly criticised for being open to misinterpretation, but proved to give the best impression of uncertainty when participants were asked to interpret results from the greenhouse gas inventory. Box plots were most favoured by our participants largely because they were particularly favoured by those who worked

  4. Agricultural Chartbook 1988. Agriculture Handbook No. 673.

    ERIC Educational Resources Information Center

    Department of Agriculture, Washington, DC.

    These charts present an overview of the current economic health of American agriculture. The charts move from the national and international arenas to farm economic health measures and crop and livestock trends. A small amount of descriptive narrative accompanies most of the charts. Charts depicting the economic picture of U.S. agriculture include…

  5. 1986 Agricultural Chartbook. Agriculture Handbook No. 663.

    ERIC Educational Resources Information Center

    Department of Agriculture, Washington, DC.

    This book contains 310 charts, tables, and graphs containing statistical information about agriculture-related commodities and services, primarily in the United States, in 1986. The book is organized in seven sections that cover the following topics: (1) the farm (farm income, farm population, farm workers, food and fiber system, agriculture and…

  6. Delta-H plot evaluation of remanence behavior in barium ferrite tapes and disks

    NASA Astrophysics Data System (ADS)

    Harrell, J. W.; Richards, David; Parker, Martin R.

    1993-05-01

    Remanence studies in recent years have used the characteristics of the Henkel plot and the delta-M plot in the interpretation of interaction field effects in particulate magnetic media. Studies of these two plots in ordered BaFe coatings, however, indicate that both plots give inadequate description of interaction field effects. An alternative to the delta-M plot is the delta-H plot in which, essentially, the (normalized) susceptibility curves for the isothermal remagnetization and dc demagnetization processes are differenced horizontally (rather than vertically as in the delta-M plot). It is shown here that the delta-H plot is a more direct way of examining the interaction fields. Simulated delta-H plots are presented based on a recent mean field model by Che and Bertram and are compared with measurements made on oriented BaFe coatings.

  7. [Heart rate variability study based on a novel RdR RR Intervals Scatter Plot].

    PubMed

    Lu, Hongwei; Lu, Xiuyun; Wang, Chunfang; Hua, Youyuan; Tian, Jiajia; Liu, Shihai

    2014-08-01

    On the basis of Poincare scatter plot and first order difference scatter plot, a novel heart rate variability (HRV) analysis method based on scatter plots of RR intervals and first order difference of RR intervals (namely, RdR) was proposed. The abscissa of the RdR scatter plot, the x-axis, is RR intervals and the ordinate, y-axis, is the difference between successive RR intervals. The RdR scatter plot includes the information of RR intervals and the difference between successive RR intervals, which captures more HRV information. By RdR scatter plot analysis of some records of MIT-BIH arrhythmias database, we found that the scatter plot of uncoupled premature ventricular contraction (PVC), coupled ventricular bigeminy and ventricular trigeminy PVC had specific graphic characteristics. The RdR scatter plot method has higher detecting performance than the Poincare scatter plot method, and simpler and more intuitive than the first order difference method.

  8. Fermilab E866 (NuSea) Figures and Data Plots

    DOE Data Explorer

    None

    The NuSea Experiment at Fermilab studied the internal structure of protons, in particular the difference between up quarks and down quarks. This experiment also addressed at least two other physics questions: nuclear effects on the production of charmonia states (bound states of charm and anti-charm quarks) and energy loss of quarks in nuclei from Drell-Yan measurements on nuclei. While much of the NuSea data are available only to the collaboration, figures, data plots, and tables are presented as stand-alone items for viewing or download. They are listed in conjunction with the published papers, theses, or presentations in which they first appeared. The date range is 1998 to 2008. To see these figures and plots, click on E866 publications or go directly to http://p25ext.lanl.gov/e866/papers/papers.html. Theses are at http://p25ext.lanl.gov/e866/papers/e866theses/e866theses.html and the presentations are found at http://p25ext.lanl.gov/e866/papers/e866talks/e866talks.html. Many of the items are postscript files.

  9. A GENERAL ALGORITHM FOR THE CONSTRUCTION OF CONTOUR PLOTS

    NASA Technical Reports Server (NTRS)

    Johnson, W.

    1994-01-01

    The graphical presentation of experimentally or theoretically generated data sets frequently involves the construction of contour plots. A general computer algorithm has been developed for the construction of contour plots. The algorithm provides for efficient and accurate contouring with a modular approach which allows flexibility in modifying the algorithm for special applications. The algorithm accepts as input data values at a set of points irregularly distributed over a plane. The algorithm is based on an interpolation scheme in which the points in the plane are connected by straight line segments to form a set of triangles. In general, the data is smoothed using a least-squares-error fit of the data to a bivariate polynomial. To construct the contours, interpolation along the edges of the triangles is performed, using the bivariable polynomial if data smoothing was performed. Once the contour points have been located, the contour may be drawn. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 series computer with a central memory requirement of approximately 100K of 8-bit bytes. This computer algorithm was developed in 1981.

  10. WEGO: a web tool for plotting GO annotations

    PubMed Central

    Ye, Jia; Fang, Lin; Zheng, Hongkun; Zhang, Yong; Chen, Jie; Zhang, Zengjin; Wang, Jing; Li, Shengting; Li, Ruiqiang; Bolund, Lars; Wang, Jun

    2006-01-01

    Unified, structured vocabularies and classifications freely provided by the Gene Ontology (GO) Consortium are widely accepted in most of the large scale gene annotation projects. Consequently, many tools have been created for use with the GO ontologies. WEGO (Web Gene Ontology Annotation Plot) is a simple but useful tool for visualizing, comparing and plotting GO annotation results. Different from other commercial software for creating chart, WEGO is designed to deal with the directed acyclic graph structure of GO to facilitate histogram creation of GO annotation results. WEGO has been used widely in many important biological research projects, such as the rice genome project and the silkworm genome project. It has become one of the daily tools for downstream gene annotation analysis, especially when performing comparative genomics tasks. WEGO, along with the two other tools, namely External to GO Query and GO Archive Query, are freely available for all users at . There are two available mirror sites at and . Any suggestions are welcome at wego@genomics.org.cn. PMID:16845012

  11. Computational Drafting of Plot Structures for Russian Folk Tales.

    PubMed

    Gervás, Pablo

    The plots of stories are known to follow general patterns in terms of their overall structure. This was the basic tenet of structuralist approaches to narratology. Vladimir Propp proposed a procedure for the generation of new tales based on his semi-formal description of the structure of Russian folk tales. This is one of the first existing instances of a creative process described procedurally. The present paper revisits Propp's morphology to build a system that generates instances of Russian folk tales. Propp's view of the folk tale as a rigid sequence of character functions is employed as a plot driver, and some issues that Propp declared relevant but did not explore in detail-such as long-range dependencies between functions or the importance of endings-are given computational shape in the context of a broader architecture that captures all the aspects discussed by Propp. A set of simple evaluation metrics for the resulting outputs is defined inspired on Propp's formalism. The potential of the resulting system for providing a creative story generation system is discussed, and possible lines of future work are discussed.

  12. A system of regional agricultural land use mapping tested against small scale Apollo 9 color infrared photography of the Imperial Valley (California)

    USGS Publications Warehouse

    Johnson, Claude W.; Browden, Leonard W.; Pease, Robert W.

    1969-01-01

    Interpretation results of the small scale ClR photography of the Imperial Valley (California) taken on March 12, 1969 by the Apollo 9 earth orbiting satellite have shown that world wide agricultural land use mapping can be accomplished from satellite ClR imagery if sufficient a priori information is available for the region being mapped. Correlation of results with actual data is encouraging although the accuracy of identification of specific crops from the single image is poor. The poor results can be partly attributed to only one image taken during mid-season when the three major crops were reflecting approximately the same and their ClR image appears to indicate the same crop type. However, some incapacity can be attributed to lack of understanding of the subtle variations of visual and infrared color reflectance of vegetation and surrounding environment. Analysis of integrated color variations of the vegetation and background environment recorded on ClR imagery is discussed. Problems associated with the color variations may be overcome by development of a semi-automatic processing system which considers individual field units or cells. Design criteria for semi-automatic processing system are outlined.

  13. Evaluating uncertainty in 7Be-based soil erosion estimates: an experimental plot approach

    NASA Astrophysics Data System (ADS)

    Blake, Will; Taylor, Alex; Abdelli, Wahid; Gaspar, Leticia; Barri, Bashar Al; Ryken, Nick; Mabit, Lionel

    2014-05-01

    Soil erosion remains a major concern for the international community and there is a growing need to improve the sustainability of agriculture to support future food security. High resolution soil erosion data are a fundamental requirement for underpinning soil conservation and management strategies but representative data on soil erosion rates are difficult to achieve by conventional means without interfering with farming practice and hence compromising the representativeness of results. Fallout radionuclide (FRN) tracer technology offers a solution since FRN tracers are delivered to the soil surface by natural processes and, where irreversible binding can be demonstrated, redistributed in association with soil particles. While much work has demonstrated the potential of short-lived 7Be (half-life 53 days), particularly in quantification of short-term inter-rill erosion, less attention has focussed on sources of uncertainty in derived erosion measurements and sampling strategies to minimise these. This poster outlines and discusses potential sources of uncertainty in 7Be-based soil erosion estimates and the experimental design considerations taken to quantify these in the context of a plot-scale validation experiment. Traditionally, gamma counting statistics have been the main element of uncertainty propagated and reported but recent work has shown that other factors may be more important such as: (i) spatial variability in the relaxation mass depth that describes the shape of the 7Be depth distribution for an uneroded point; (ii) spatial variability in fallout (linked to rainfall patterns and shadowing) over both reference site and plot; (iii) particle size sorting effects; (iv) preferential mobility of fallout over active runoff contributing areas. To explore these aspects in more detail, a plot of 4 x 35 m was ploughed and tilled to create a bare, sloped soil surface at the beginning of winter 2013/2014 in southwest UK. The lower edge of the plot was bounded by

  14. Core Curriculum in Agriculture. Phase I Report.

    ERIC Educational Resources Information Center

    Illinois Univ., Urbana. Dept. of Vocational and Technical Education.

    The primary purpose of this project is to develop and field test a core curriculum in agriculture for rural secondary schools and a core curriculum in agriculture for metropolitan or urban schools in Illinois. Activities of Phase 1 of the project were reviewing literature and interviewing industry representatives to identify pertinent research and…

  15. Agriculture: Climate Change

    EPA Pesticide Factsheets

    Climate change affects agricultural producers because agriculture and fisheries depend on specific climate conditions. Temperature changes can cause crop planting dates to shift. Droughts and floods due to climate change may hinder farming practices.

  16. Agriculture: Land Use

    EPA Pesticide Factsheets

    Land Use and agriculture. Information about land use restrictions and incentive programs.Agricultural operations sometimes involve activities regulated by laws designed to protect water supplies, threatened or endangered plants and animals, or wetlands.

  17. Strategies for Agriculture.

    ERIC Educational Resources Information Center

    Crosson, Pierre R.; Rosenberg, Norman J.

    1989-01-01

    Discusses the change of agricultural methods with human population growth. Describes the trends of world food production, changes in farmland, use of fertilizer, and 13 agricultural research institutions. Lists 5 references for further reading. (YP)

  18. Traditional Agriculture and Permaculture.

    ERIC Educational Resources Information Center

    Pierce, Dick

    1997-01-01

    Discusses benefits of combining traditional agricultural techniques with the concepts of "permaculture," a framework for revitalizing traditions, culture, and spirituality. Describes school, college, and community projects that have assisted American Indian communities in revitalizing sustainable agricultural practices that incorporate…

  19. Advanced agricultural biotechnologies and sustainable agriculture.

    PubMed

    Lyson, Thomas A

    2002-05-01

    Agricultural biotechnologies are anchored to a scientific paradigm rooted in experimental biology, whereas sustainable agriculture rests on a biological paradigm that is best described as ecological. Both biotechnology and sustainable agriculture are associated with particular social science paradigms: biotechnology has its foundation in neoclassical economics, but sustainability is framed by an emerging community-centered, problem-solving perspective. Fundamentally, biotechnology and neoclassical economics are reductionist in nature. Sustainability and community problem-solving, however, are nonreductionist. Given these differences, we might see the development of two rather distinct systems of food production in the near future.

  20. Criminal profiling as a plotting activity based on abductive processes.

    PubMed

    Verde, Alfredo; Nurra, Antonio

    2010-10-01

    In this article the authors analyze the nature and aims of criminal profiling from a theoretical point of view. The need to become increasingly "scientific" has given rise to the modern approaches of profiling, which have been particularly successful in cases of serial homicides and sex crimes, given that compulsive (perverse) acts, because of their ritual nature, have been described as being more easily foreseeable and presumably linkable to the psychological and even personal characteristics of a given criminal. On this basis, the authors analyze profiling from an epistemological point of view and show how, in the concrete activity of profiling, profilers depart from the "certainty" of the scientific models (those that are based on deductive-inductive processes); the epistemological basis of reasoning changes as there is no longer an induction-deduction model but rather an abductive model (as conceived and explained by Peirce) in which the importance of plotting (the weaving of a narrative) becomes greater.

  1. Multiscale recurrence quantification analysis of order recurrence plots

    NASA Astrophysics Data System (ADS)

    Xu, Mengjia; Shang, Pengjian; Lin, Aijing

    2017-03-01

    In this paper, we propose a new method of multiscale recurrence quantification analysis (MSRQA) to analyze the structure of order recurrence plots. The MSRQA is based on order patterns over a range of time scales. Compared with conventional recurrence quantification analysis (RQA), the MSRQA can show richer and more recognizable information on the local characteristics of diverse systems which successfully describes their recurrence properties. Both synthetic series and stock market indexes exhibit their properties of recurrence at large time scales that quite differ from those at a single time scale. Some systems present more accurate recurrence patterns under large time scales. It demonstrates that the new approach is effective for distinguishing three similar stock market systems and showing some inherent differences.

  2. NOvA (Fermilab E929) Official Plots and Figures

    DOE Data Explorer

    The NOvA collaboration, consisting of 180 researchers across 28 institutions and managed by the Fermi National Accelerator Laboratory (FNAL), is developing instruments for a neutrino-focused experiment that will attempt to answer three fundamental questions in neutrino physics: 1) Can we observe the oscillation of muon neutrinos to electron neutrinos; 2) What is the ordering of the neutrino masses; and 3) What is the symmetry between matter and antimatter? The collaboration makes various data plots and figures available. These are grouped under five headings, with brief descriptions included for each individual figure: Neutrino Spectra, Detector Overview, Theta12 Mass Hierarchy CP phase, Theta 23 Delta Msqr23, and NuSterile.

  3. Dalitz Plot Analysis of Ds+->pi+pi-pi+

    SciTech Connect

    Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prencipe, E.; Prudent, X.; Tisserand, V.; Garra Tico, J.; Grauges, E.; Lopez, L.; Palano, A.; Pappagallo, M.; Eigen, G.; Stugu, B.; Sun, L.; Abrams, G.S.; Battaglia, M.; Brown, D.N.; Cahn, R.N.; Jacobsen, R.G.; /LBL, Berkeley /UC, Berkeley /Birmingham U. /Ruhr U., Bochum /British Columbia U. /Brunel U. /Novosibirsk, IYF /UC, Irvine /UCLA /UC, Riverside /UC, San Diego /UC, Santa Barbara /UC, Santa Cruz /Caltech /Cincinnati U. /Colorado U. /Colorado State U. /Dortmund U. /Dresden, Tech. U. /Ecole Polytechnique /Edinburgh U. /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /Frascati /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /Harvard U. /Heidelberg U. /Humboldt U., Berlin /Imperial Coll., London /Iowa U. /Iowa State U. /Johns Hopkins U. /Orsay, LAL /LLNL, Livermore /Liverpool U. /Queen Mary, U. of London /Royal Holloway, U. of London /Louisville U. /Mainz U., Inst. Kernphys. /Manchester U. /Maryland U. /Massachusetts U., Amherst /MIT, LNS /McGill U. /INFN, Milan /Milan U. /INFN, Milan /INFN, Milan /Milan U. /Mississippi U. /Montreal U. /Mt. Holyoke Coll. /INFN, Naples /Naples U. /INFN, Naples /INFN, Naples /Naples U. /NIKHEF, Amsterdam /Notre Dame U. /Ohio State U. /Oregon U. /INFN, Padua /Padua U. /INFN, Padua /INFN, Padua /Padua U. /Paris U., VI-VII /Pennsylvania U. /INFN, Perugia /Perugia U. /INFN, Pisa /Pisa U. /INFN, Pisa /Pisa, Scuola Normale Superiore /INFN, Pisa /Pisa U. /INFN, Pisa /Princeton U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /Rostock U. /Rutherford /DSM, DAPNIA, Saclay /South Carolina U. /SLAC /Stanford U., Phys. Dept. /SUNY, Albany /Tennessee U. /Texas U. /Texas U., Dallas /INFN, Turin /Turin U. /INFN, Trieste /Trieste U. /Valencia U., IFIC /Victoria U. /Warwick U. /Wisconsin U., Madison

    2009-01-26

    A Dalitz plot analysis of {approx} 13, 000 D{sub s}{sup +} decays to {pi}{sup +}{pi}{sup +}{pi}{sup -} has been performed. A 384 fb{sup -1} data sample, recorded by the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} storage ring running at center of mass energies near 10.6 GeV, is used. Amplitudes and phases of the intermediate resonances which contribute to this final state are measured. A high precision measurement of the ratio: {Beta}(D{sub s}{sup +} {yields} {pi}{sup +}{pi}{sup +}{pi}{sup -})/{Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) = 0.199 {+-} 0.004 {+-} 0.006 is performed. Using a model independent partial wave analysis the amplitude and phase of the S-wave have been measured.

  4. Spectral plots and the representation and interpretation of biological data.

    PubMed

    Banerjee, Anirban; Jost, Jürgen

    2007-08-01

    It is basic question in biology and other fields to identify the characteristic properties that on one hand are shared by structures from a particular realm, like gene regulation, protein-protein interaction or neural networks or foodwebs, and that on the other hand distinguish them from other structures. We introduce and apply a general method, based on the spectrum of the normalized graph Laplacian, that yields representations, the spectral plots, that allow us to find and visualize such properties systematically. We present such visualizations for a wide range of biological networks and compare them with those for networks derived from theoretical schemes. The differences that we find are quite striking and suggest that the search for universal properties of biological networks should be complemented by an understanding of more specific features of biological organization principles at different scales.

  5. Sixth plot of the carcinogenic potency database: results of animal bioassays published in the General Literature 1989 to 1990 and by the National Toxicology Program 1990 to 1993.

    PubMed Central

    Gold, L S; Manley, N B; Slone, T H; Garfinkel, G B; Ames, B N; Rohrbach, L; Stern, B R; Chow, K

    1995-01-01

    This paper presents two types of information from the Carcinogenic Potency Database (CPDB): (a) the sixth chronological plot of analyses of long-term carcinogenesis bioassays, and (b) an index to chemicals in all six plots, including a summary compendium of positivity and potency for each chemical (Appendix 14). The five earlier plots of the CPDB have appeared in this journal, beginning in 1984 (1-5). Including the plot in this paper, the CPDB reports results of 5002 experiments on 1230 chemicals. This paper includes bioassay results published in the general literature between January 1989 and December 1990, and in Technical Reports of the National Toxicology Program between January 1990 and June 1993. Analyses are included on 17 chemicals tested in nonhuman primates by the Laboratory of Chemical Pharmacology, National Cancer Institute. This plot presents results of 531 long-term, chronic experiments of 182 test compounds and includes the same information about each experiment in the same plot format as the earlier papers: the species and strain of test animal, the route and duration of compound administration, dose level and other aspects of experimental protocol, histopathology and tumor incidence, TD50 (carcinogenic potency) and its statistical significance, dose response, author's opinion about carcinogenicity, and literature citation. We refer the reader to the 1984 publications (1,6,7) for a detailed guide to the plot of the database, a complete description of the numerical index of carcinogenic potency, and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. The six plots of the CPDB are to be used together since results of individual experiments that were published earlier are not repeated. Appendix 14 is designed to facilitate access to results on all chemicals. References to the published papers that are the source of

  6. Information for Agricultural Development.

    ERIC Educational Resources Information Center

    Kaungamno, E. E.

    This paper describes the major international agricultural information services, sources, and systems; outlines the existing information situation in Tanzania as it relates to problems of agricultural development; and reviews the improvements in information provision resources required to support the process of agricultural development in Tanzania.…

  7. Chapter 3: Cropland Agriculture

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In 2013, cropland agriculture resulted in total emissions of approximately 209 MMT CO2 eq. of greenhouse gases (GHG). Cropland agriculture is responsible for almost half (46%) of all emissions from the agricultural sector. Nitrous oxide (N2O), carbon dioxide (CO2), and methane (CH4) emissions from c...

  8. Agricultural Structures, Volume II.

    ERIC Educational Resources Information Center

    Linhardt, Richard E.; Burhoe, Steve

    This guide to a curriculum unit in agricultural structures is designed to expand the curriculum materials available in vocational agriculture in Missouri. It and Agricultural Structures I (see note) provide reference materials to systematize the curriculum. The six units cover working with concrete (19 lessons, 2 laboratory exercises), drawing and…

  9. Biotechnology and Agriculture.

    ERIC Educational Resources Information Center

    Kenney, Martin

    Even at this early date in the application of biotechnology to agriculture, it is clear that agriculture may provide the largest market for new or less expensive biotechnologically manufactured products. The chemical and pharmaceutical industries that hold important positions in agricultural inputs are consolidating their positions by purchasing…

  10. Agriculture Business and Management.

    ERIC Educational Resources Information Center

    Seperich, George; And Others

    This curriculum guide is intended for vocational agriculture teachers who deliver agricultural business and management programs at the secondary or postsecondary level. It is based on the Arizona validated occupational competencies and tasks for management and supervisory positions in agricultural business. The competency/skill and task list…

  11. African Americans and Agriculture.

    ERIC Educational Resources Information Center

    Morgan, Joan

    2000-01-01

    Reviews the opportunities available in the field of agriculture for African American students and notes efforts of the 136 colleges of agriculture to publicize their offerings and recruit students. Profiles six black leaders in agriculture, highlighting their achievements in research and aid to developing countries. A table provides data on annual…

  12. Agriculture, Environmental Education Guide.

    ERIC Educational Resources Information Center

    Project I-C-E, Green Bay, WI.

    This agriculture guide, for use at the secondary level, is one of a series of guides, K-12, which were developed by teachers to help introduce environmental education into the total curriculum. Environmental problems are present in every community where agriculture education is offered, and therefore many agriculture teachers have included some…

  13. The diagnostic plot analysis of artesian aquifers with case studies in Table Mountain Group of South Africa

    NASA Astrophysics Data System (ADS)

    Sun, Xiaobin; Xu, Yongxin; Lin, Lixiang

    2015-05-01

    Parameter estimates of artesian aquifers where piezometric head is above ground level are largely made through free-flowing and recovery tests. The straight-line method proposed by Jacob-Lohman is often used for interpretation of flow rate measured at flowing artesian boreholes. However, the approach fails to interpret the free-flowing test data from two artesian boreholes in the fractured-rock aquifer in Table Mountain Group (TMG) of South Africa. The diagnostic plot method using the reciprocal rate derivative is adapted to evaluate the artesian aquifer properties. The variation of the derivative helps not only identify flow regimes and discern the boundary conditions, but also facilitates conceptualization of the aquifer system and selection of an appropriate model for data interpretation later on. Test data from two free-flowing tests conducted in different sites in TMG are analysed using the diagnostic plot method. Based on the results, conceptual models and appropriate approaches are developed to evaluate the aquifer properties. The advantages and limitations of using the diagnostic plot method on free-flowing test data are discussed.

  14. Rotary balance data for a single-engine agricultural airplane configuration for an angle-of-attack range of 8 deg to 90 deg

    NASA Technical Reports Server (NTRS)

    Mulcay, W. J.; Chu, J.

    1980-01-01

    Aerodynamic characteristics obtained in a helical flow environment utilizing a rotary balance located in the Langley spin tunnel are presented in plotted form for a 1/10 scale single engine agricultural airplane model. The configurations tested include the basic airplane, various wing leading edge and wing tip devices, elevator, aileron, and rudder control settings, and other modifications. Data are presented without analysis for an angle of attack range of 8 deg to 90 deg, and clockwise and counter-clockwise rotations covering a spin coefficient range from 0 to .9.

  15. CI2 for creating and comparing confidence-intervals for time-series bivariate plots.

    PubMed

    Mullineaux, David R

    2017-02-01

    Currently no method exists for calculating and comparing the confidence-intervals (CI) for the time-series of a bivariate plot. The study's aim was to develop 'CI2' as a method to calculate the CI on time-series bivariate plots, and to identify if the CI between two bivariate time-series overlap. The test data were the knee and ankle angles from 10 healthy participants running on a motorised standard-treadmill and non-motorised curved-treadmill. For a recommended 10+ trials, CI2 involved calculating 95% confidence-ellipses at each time-point, then taking as the CI the points on the ellipses that were perpendicular to the direction vector between the means of two adjacent time-points. Consecutive pairs of CI created convex quadrilaterals, and any overlap of these quadrilaterals at the same time or ±1 frame as a time-lag calculated using cross-correlations, indicated where the two time-series differed. CI2 showed no group differences between left and right legs on both treadmills, but the same legs between treadmills for all participants showed differences of less knee extension on the curved-treadmill before heel-strike. To improve and standardise the use of CI2 it is recommended to remove outlier time-series, use 95% confidence-ellipses, and scale the ellipse by the fixed Chi-square value as opposed to the sample-size dependent F-value. For practical use, and to aid in standardisation or future development of CI2, Matlab code is provided. CI2 provides an effective method to quantify the CI of bivariate plots, and to explore the differences in CI between two bivariate time-series.

  16. Species composition of grasshoppers (Orthoptera) in open plots and farmlands in calabar metropolis, southern Nigeria.

    PubMed

    Oku, E E; Arong, G A; Bassey, D A

    2011-04-15

    The grasshoppers are strategic in the welfare of man and may constitute a major threat when its population is not checked. A study on the distribution of grasshoppers in open plots and farmlands was carried out within Calabar Metropolis between August to November, 2010. A total of 295 grasshoppers belonging to 11 species grouped under 3 families (Tettigoniidae, Acrididae and Pyrgomorphidae) were collected from 8 study locations. Grasshoppers were collected weekly from all study sites using sweep nets between 11 a.m. to 4 p.m. The collection was done using sweep nets between 11 a.m. to 4 p.m. when grasshoppers baked themselves under the sun. The percentage abundance of these species were Spathosterrium pygmaeum (16.27%), Tettigonia viridissima (11.86%), Catantops spissus (11.19%) Acridaturita sp. (10.17%), Gastrimargus acrididae (9.83%), Schistocerca nitens (9.49%), Tylopsis sp. (7.46%), Zonocerus variegatus (6.78%), Omocestus viridulus (6.10%), Scudderia mexicana (5.76%) and Zonocerus elegans (5.08%). Tettigonia viridissima and Acridaturita sp. were largely distributed as it occurred in 7 of 8 study sites while Scudderia mexicana was the least distributed, as it was reported in 3 sites only. The dominant grasshopper species in open plot was Spathosterrium pygmaeum (19%) in relative abundance and the least was Zonocerus variegatus (0.64%). Zonocerus variegatus was the dominant species in farmland (14%) in relative abundance and the least was Schistocerca nitens (4%). Chi-square test showed a high significant difference between the distribution of grasshoppers in open plots and farmlands (p < 0.05). Variations in grasshopper species composition were attributed to lizard predation and management practices such as grass cutting, fertilizer and pesticide applications. It was therefore concluded that species abundance and population of grasshoppers could be enhanced by minimizing human activities that interfere with land use.

  17. Meta-STEPP: subpopulation treatment effect pattern plot for individual patient data meta-analysis.

    PubMed

    Wang, Xin Victoria; Cole, Bernard; Bonetti, Marco; Gelber, Richard D

    2016-09-20

    We have developed a method, called Meta-STEPP (subpopulation treatment effect pattern plot for meta-analysis), to explore treatment effect heterogeneity across covariate values in the meta-analysis setting for time-to-event data when the covariate of interest is continuous. Meta-STEPP forms overlapping subpopulations from individual patient data containing similar numbers of events with increasing covariate values, estimates subpopulation treatment effects using standard fixed-effects meta-analysis methodology, displays the estimated subpopulation treatment effect as a function of the covariate values, and provides a statistical test to detect possibly complex treatment-covariate interactions. Simulation studies show that this test has adequate type-I error rate recovery as well as power when reasonable window sizes are chosen. When applied to eight breast cancer trials, Meta-STEPP suggests that chemotherapy is less effective for tumors with high estrogen receptor expression compared with those with low expression. Copyright © 2016 John Wiley & Sons, Ltd.

  18. On the Error of the Dixon Plot for Estimating the Inhibition Constant between Enzyme and Inhibitor

    ERIC Educational Resources Information Center

    Fukushima, Yoshihiro; Ushimaru, Makoto; Takahara, Satoshi

    2002-01-01

    In textbook treatments of enzyme inhibition kinetics, adjustment of the initial inhibitor concentration for inhibitor bound to enzyme is often neglected. For example, in graphical plots such as the Dixon plot for estimation of an inhibition constant, the initial concentration of inhibitor is usually plotted instead of the true inhibitor…

  19. A computer program for obtaining airplane configuration plots from digital Datcom input data

    NASA Technical Reports Server (NTRS)

    Roy, M. L.; Sliwa, S. M.

    1983-01-01

    A computer program is described which reads the input file for the Stability and Control Digital Datcom program and generates plots from the aircraft configuration data. These plots can be used to verify the geometric input data to the Digital Datcom program. The program described interfaces with utilities available for plotting aircraft configurations by creating a file from the Digital Datcom input data.

  20. 9 CFR 108.2 - Plot plans, blueprints, and legends required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Plot plans, blueprints, and legends... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.2 Plot plans, blueprints, and legends required. Each applicant for an establishment license shall prepare a plot plan showing all buildings for each particular...

  1. 9 CFR 108.2 - Plot plans, blueprints, and legends required.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Plot plans, blueprints, and legends... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.2 Plot plans, blueprints, and legends required. Each applicant for an establishment license shall prepare a plot plan showing all buildings for each particular...

  2. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Revision of plot plans, blueprints... FACILITY REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.6 Revision of plot plans, blueprints, and legends... changes affecting the workflow are to be made. The licensee shall: (a) Prepare revised plot...

  3. 9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Filing of plot plans, blueprints, and... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.7 Filing of plot plans, blueprints, and legends. Two copies of all plot plans, blueprints, and legends, including revisions, shall be submitted to Animal and...

  4. Fitting Data to Model: Structural Equation Modeling Diagnosis Using Two Scatter Plots

    ERIC Educational Resources Information Center

    Yuan, Ke-Hai; Hayashi, Kentaro

    2010-01-01

    This article introduces two simple scatter plots for model diagnosis in structural equation modeling. One plot contrasts a residual-based M-distance of the structural model with the M-distance for the factor score. It contains information on outliers, good leverage observations, bad leverage observations, and normal cases. The other plot contrasts…

  5. 9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Revision of plot plans, blueprints... FACILITY REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.6 Revision of plot plans, blueprints, and legends... changes affecting the workflow are to be made. The licensee shall: (a) Prepare revised plot...

  6. 9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Filing of plot plans, blueprints, and... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.7 Filing of plot plans, blueprints, and legends. Three copies of all plot plans, blueprints, and legends, including revisions, shall be submitted to Animal and...

  7. Using canopy resistance for infrared heater control when warming open-field plots

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Several research groups are using or planning to use arrays of infrared heaters to simulate global warming in open-field plots with a control strategy that involves maintaining a constant rise in canopy temperatures of the heated plots above those of un-heated Reference plots. . However, if the warm...

  8. Risk assessment of linear alkylbenzene sulphonates, LAS, in agricultural soil revisited: robust chronic toxicity tests for Folsomia candida (Collembola), Aporrectodea caliginosa (Oligochaeta) and Enchytraeus crypticus (Enchytraeidae).

    PubMed

    Krogh, Paul Henning; Lopez, Coral Verge; Cassani, Giorgio; Jensen, John; Holmstrup, Martin; Schraepen, Nathalie; Jørgensen, Elin; Gavor, Zdenek; Temara, Ali

    2007-10-01

    To obtain robust data on the toxicity of LAS, tests with the collembolan Folsomia candida L., the oligochaetes Aporrectodea caliginosa Savigny (earthworm) and Enchytraeus crypticus Westheide and Graefe (enchytraeid) were performed in a sandy loam soil. Additionally limited tests with LAS spiked to sewage sludge, and subsequently mixed into soil, were performed. For the endpoint of interest, reproduction in soil, we found an EC10 of 205 mg LAS kg(-1) soil [8.6-401] [95% confidence limits] for F. candida and an EC10 of 46 mg LAS kg(-1) soil [13-80] for A. caliginosa after 28 days. E. crypticus was not affected by concentrations up to 120 mg LAS kg(-1) soil. When adding (low contaminated) non-spiked sludge to soil, high stimulation of reproduction was observed for E. crypticus and A. caliginosa but not for F. candida. We argue that this difference in stimulative response between the tested species is related to the difference in feeding behaviour. Sludge spiked with LAS did not significantly affect the reproduction of F. candida (fertility: number of juvenile offspring) and A. caliginosa (fecundity: number of cocoons) (dose equivalent to 181 g and 91 g LAS kg(-1) sludge, respectively). Significantly reduced reproduction was observed for E. crypticus (at 120 mg LAS kg(-1) soil+sludge corresponding to 72 g LAS kg(-1) sludge) compared to non-spiked sludge. The reproduction by E. crypticus was, however, comparable to the reproduction observed in the control soil without sludge. Compared to LAS directly spiked to soil, the reproductive output of organisms exposed to spiked sludge was either not significantly different (F. candida, E. crypticus) or significantly improved (A. caliginosa). More studies are needed in order to make firm conclusions on the potential effect of artificially contaminated sludge in soil systems.

  9. Patterns and Drivers of Scattered Tree Loss in Agricultural Landscapes: Orchard Meadows in Germany (1968-2009)

    PubMed Central

    Plieninger, Tobias; Levers, Christian; Mantel, Martin; Costa, Augusta; Schaich, Harald; Kuemmerle, Tobias

    2015-01-01

    Scattered trees support high levels of farmland biodiversity and ecosystem services in agricultural landscapes, but they are threatened by agricultural intensification, urbanization, and land abandonment. This study aimed to map and quantify the decline of orchard meadows (scattered fruit trees of high nature conservation value) for a region in Southwestern Germany for the 1968 2009 period and to identify the driving forces of this decline. We derived orchard meadow loss from 1968 and 2009 aerial images and used a boosted regression trees modelling framework to assess the relative importance of 18 environmental, demographic, and socio-economic variables to test five alternative hypothesis explaining orchard meadow loss. We found that orchard meadow loss occurred in flatter areas, in areas where smaller plot sizes and fragmented orchard meadows prevailed, and in areas near settlements and infrastructure. The analysis did not confirm that orchard meadow loss was higher in areas where agricultural intensification was stronger and in areas of lower implementation levels of conservation policies. Our results demonstrated that the influential drivers of orchard meadow loss were those that reduce economic profitability and increase opportunity costs for orchards, providing incentives for converting orchard meadows to other, more profitable land uses. These insights could be taken up by local- and regional-level conservation policies to identify the sites of persistent orchard meadows in agricultural landscapes that would be prioritized in conservation efforts. PMID:25932914

  10. Comprehensive Analysis of LC/MS Data Using Pseudocolor Plots

    NASA Astrophysics Data System (ADS)

    Crutchfield, Christopher A.; Olson, Matthew T.; Gourgari, Evgenia; Nesterova, Maria; Stratakis, Constantine A.; Yergey, Alfred L.

    2013-02-01

    We have developed new applications of the pseudocolor plot for the analysis of LC/MS data. These applications include spectral averaging, analysis of variance, differential comparison of spectra, and qualitative filtering by compound class. These applications have been motivated by the need to better understand LC/MS data generated from analysis of human biofluids. The examples presented use data generated to profile steroid hormones in urine extracts from a Cushing's disease patient relative to a healthy control, but are general to any discovery-based scanning mass spectrometry technique. In addition to new visualization techniques, we introduce a new metric of variance: the relative maximum difference from the mean. We also introduce the concept of substructure-dependent analysis of steroid hormones using precursor ion scans. These new analytical techniques provide an alternative approach to traditional untargeted metabolomics workflow. We present an approach to discovery using MS that essentially eliminates alignment or preprocessing of spectra. Moreover, we demonstrate the concept that untargeted metabolomics can be achieved using low mass resolution instrumentation.

  11. Applying manifold learning to plotting approximate contour trees.

    PubMed

    Takahashi, Shigeo; Fujishiro, Issei; Okada, Masato

    2009-01-01

    A contour tree is a powerful tool for delineating the topological evolution of isosurfaces of a single-valued function, and thus has been frequently used as a means of extracting features from volumes and their time-varying behaviors. Several sophisticated algorithms have been proposed for constructing contour trees while they often complicate the software implementation especially for higher-dimensional cases such as time-varying volumes. This paper presents a simple yet effective approach to plotting in 3D space, approximate contour trees from a set of scattered samples embedded in the high-dimensional space. Our main idea is to take advantage of manifold learning so that we can elongate the distribution of high-dimensional data samples to embed it into a low-dimensional space while respecting its local proximity of sample points. The contribution of this paper lies in the introduction of new distance metrics to manifold learning, which allows us to reformulate existing algorithms as a variant of currently available dimensionality reduction scheme. Efficient reduction of data sizes together with segmentation capability is also developed to equip our approach with a coarse-to-fine analysis even for large-scale datasets. Examples are provided to demonstrate that our proposed scheme can successfully traverse the features of volumes and their temporal behaviors through the constructed contour trees.

  12. Revisiting the Ramachandran plot from a new angle.

    PubMed

    Zhou, Alice Qinhua; O'Hern, Corey S; Regan, Lynne

    2011-07-01

    The pioneering work of Ramachandran and colleagues emphasized the dominance of steric constraints in specifying the structure of polypeptides. The ubiquitous Ramachandran plot of backbone dihedral angles (ϕ and ψ) defined the allowed regions of conformational space. These predictions were subsequently confirmed in proteins of known structure. Ramachandran and colleagues also investigated the influence of the backbone angle τ on the distribution of allowed ϕ/ψ combinations. The "bridge region" (ϕ ≤ 0° and -20° ≤ ψ ≤ 40°) was predicted to be particularly sensitive to the value of τ. Here we present an analysis of the distribution of ϕ/ψ angles in 850 non-homologous proteins whose structures are known to a resolution of 1.7 Å or less and sidechain B-factor less than 30 Ų. We show that the distribution of ϕ/ψ angles for all 87,000 residues in these proteins shows the same dependence on τ as predicted by Ramachandran and colleagues. Our results are important because they make clear that steric constraints alone are sufficient to explain the backbone dihedral angle distributions observed in proteins. Contrary to recent suggestions, no additional energetic contributions, such as hydrogen bonding, need be invoked.

  13. Comparison of Three Plot Selection Methods for Estimating Change in Temporally Variable, Spatially Clustered Populations.

    SciTech Connect

    Thompson, William L.

    2001-07-01

    Monitoring population numbers is important for assessing trends and meeting various legislative mandates. However, sampling across time introduces a temporal aspect to survey design in addition to the spatial one. For instance, a sample that is initially representative may lose this attribute if there is a shift in numbers and/or spatial distribution in the underlying population that is not reflected in later sampled plots. Plot selection methods that account for this temporal variability will produce the best trend estimates. Consequently, I used simulation to compare bias and relative precision of estimates of population change among stratified and unstratified sampling designs based on permanent, temporary, and partial replacement plots under varying levels of spatial clustering, density, and temporal shifting of populations. Permanent plots produced more precise estimates of change than temporary plots across all factors. Further, permanent plots performed better than partial replacement plots except for high density (5 and 10 individuals per plot) and 25% - 50% shifts in the population. Stratified designs always produced less precise estimates of population change for all three plot selection methods, and often produced biased change estimates and greatly inflated variance estimates under sampling with partial replacement. Hence, stratification that remains fixed across time should be avoided when monitoring populations that are likely to exhibit large changes in numbers and/or spatial distribution during the study period. Key words: bias; change estimation; monitoring; permanent plots; relative precision; sampling with partial replacement; temporary plots.

  14. A simplified modal plotting technique for the representation of complex structural models

    NASA Technical Reports Server (NTRS)

    Hanlein, S. L.

    1973-01-01

    A plotting method has been developed that has proven to be useful in rapidly defining the mode shapes of a complex spacecraft. The reduction of the complex model to a simple stick plot is accomplished by augmenting the existing NASTRAN plot package with constrained plot elements. Both the existing NASTRAN modal plot package and the stick plots of a representative mode are presented for comparison. The NASTRAN plot package provides the capability of generating modal deformations (mode shapes) resulting from real eigenvalue analysis. These modal deformations of the structural model may be displayed in the deformed shape either alone or superimposed on the undeformed shape. Another available method of displaying the modal deformations is by means of displacement vectors at the grid points

  15. Agricultural Occupations Program Planning Guide.

    ERIC Educational Resources Information Center

    Hemp, Paul E.; Mayer, Leon

    The major program objectives of agricultural occupations courses are (1) to develop agricultural competencies needed by individuals engaged in or preparing to engage in production agriculture, and in agricultural occupations other than production agriculture; (2) to develop an understanding of the career opportunities in agriculture; (3) to…

  16. How effective are soil conservation techniques in reducing plot runoff and soil loss in Europe and the Mediterranean?

    NASA Astrophysics Data System (ADS)

    Maetens, W.; Poesen, J.; Vanmaercke, M.

    2012-10-01

    The effects of soil and water conservation techniques (SWCTs) on annual runoff (Ra), runoff coefficients (RCa) and annual soil loss (SLa) at the plot scale have been extensively tested on field runoff plots in Europe and the Mediterranean. Nevertheless, a comprehensive overview of these effects and the factors controlling the effectiveness of SWCTs is lacking. Especially the effectiveness of SWCT in reducing Ra is poorly understood. Therefore, an extensive literature review is presented that compiles the results of 101 earlier studies. In each of these studies, Ra and SLa was measured on field runoff plots where various SWCTs were tested. In total, 353 runoff plots (corresponding to 2093 plot-years of data) for 103 plot-measuring stations throughout Europe and the Mediterranean were considered. SWCTs include (1) crop and vegetation management (i.e. cover crops, mulching, grass buffer strips, strip cropping and exclosure), (2) soil management (i.e. no-tillage, reduced tillage, contour tillage, deep tillage, drainage and soil amendment) and (3) mechanical methods (i.e. terraces, contour bunds and geotextiles). Comparison of the frequency distributions of SLa rates on cropland without and with the application of SWCTs shows that the exceedance probability of tolerable SLa rates is ca. 20% lower when SWCT are applied. However, no notable effect of SWCTs on the frequency distribution of RCa is observed. For 224 runoff plots (corresponding to 1567 plot-year data), SWCT effectiveness in reducing Ra and/or SLa could be directly calculated by comparing measured Ra and/or SLa with values measured on a reference plot with conventional management. Crop and vegetation management techniques (i.e. buffer strips, mulching and cover crops) and mechanical techniques (i.e. geotextiles, contour bunds and terraces) are generally more effective than soil management techniques (i.e. no-tillage, reduced tillage and contour tillage). Despite being generally less effective, no

  17. Parameterization and sensitivity analysis of a physically based plot-scale erosion model to predict rill initiation

    NASA Astrophysics Data System (ADS)

    Sisák, I.; Hausner, Cs.

    2009-04-01

    Rill erosion is an accelerated form of erosion with high agricultural and environmental significance. A physically based plot scale erosion model was developed in an earlier project to predict runoff and soil loss from small plots irrigated with rainfall simulator. The novelty of the model has been the fine scale representation of the random surface roughness hence the non-uniform runoff pattern. This enables to simulate transition between sheet and rill erosion. Rainfall simulation experiments were carried out at Somogybabod, Hungary in the watershed of Lake Balaton. Texture class of the soil was sandy loamy silt. It has been a highly eroded soil down to the calcareous sandy loess parent material with high erodibility and strong rill formation in the landscape. Simulated rainfall was applied at 60 mm.h-1 intensity for 4 plots of 2 by 5 m size and measurements were repeated three times on each plot. Irrigation was continued until steady state runoff rate was reached, runoff and erosion were measured in regular time intervals. The results were used to calibrate the model. Exponential equations were fitted to the runoff data with SPSS program. Three parameters of the model were derived directly from the fitted equations (initial infiltration, equilibrium infiltration, water storage of the active layer). Other parameters were set according to the experimental conditions (rainfall intensity, slope, plot size) or they were derived from generally accepted literature data (particle size, particle density). The remaining parameters were calibrated by repeated iterations and model runs (maximal sediment concentration, hydraulic friction, soil erodibility etc). The resulting set of parameters was considered as base scenario. After parameterization, sensitivity analysis has been performed. The calibrated values of the influencing variables were changed with plus and minus ten percent and the total runoff and erosion was compared to the base scenario. Differences in total

  18. Agricultural aviation research

    NASA Technical Reports Server (NTRS)

    Chevalier, H. L. (Compiler); Bouse, L. F. (Compiler)

    1977-01-01

    A compilation of papers, comments, and results is provided during a workshop session. The purpose of the workshop was to review and evaluate the current state of the art of agricultural aviation, to identify and rank potentially productive short and long range research and development areas, and to strengthen communications between research scientists and engineers involved in agricultural research. Approximately 71 individuals actively engaged in agricultural aviation research were invited to participate in the workshop. These were persons familiar with problems related to agricultural aviation and processing expertise which are of value for identifying and proposing beneficial research.

  19. An integrated approach to monitoring ecosystem services and agriculture: implications for sustainable agricultural intensification in Rwanda.

    PubMed

    Rosa, Melissa F; Bonham, Curan A; Dempewolf, Jan; Arakwiye, Bernadette

    2017-01-01

    Maintaining the long-term sustainability of human and natural systems across agricultural landscapes requires an integrated, systematic monitoring system that can track crop productivity and the impacts of agricultural intensification on natural resources. This study presents the design and practical implementation of a monitoring framework that combines satellite observations with ground-based biophysical measurements and household surveys to provide metrics on ecosystem services and agricultural production at multiple spatial scales, reaching from individual households and plots owned by smallholder farmers to 100-km(2) landscapes. We developed a set of protocols for monitoring and analyzing ecological and agricultural household parameters within two 10 × 10-km landscapes in Rwanda, including soil fertility, crop yield, water availability, and fuelwood sustainability. Initial results suggest providing households that rely on rainfall for crop irrigation with timely climate information and improved technical inputs pre-harvest could help increase crop productivity in the short term. The value of the monitoring system is discussed as an effective tool for establishing a baseline of ecosystem services and agriculture before further change in land use and climate, identifying limitations in crop production and soil fertility, and evaluating food security, economic development, and environmental sustainability goals set forth by the Rwandan government.

  20. Agriculture in an area impacted by past uranium mining activities

    SciTech Connect

    Carvalho, F. P.; Oliveira, J. M.; Neves, O.; Vicente, E. M.; Abreu, M. M.

    2007-07-01

    The shallow aquifer near the old Cunha Baixa uranium mine (Viseu, Portugal) was contaminated by acid mine drainage. Concentration of radionuclides in water from irrigation wells and in the topsoil layer of the agriculture fields nearby display enhanced concentrations of uranium, radium and polonium. Two types of agriculture land in this area were selected, one with enhanced and another with low uranium concentrations, for controlled growth of lettuce and potatoes. Plants were grown in replicate portions of land (two plots) in each soil type and were periodically irrigated with water from wells. In each soil, one plot was irrigated with water containing low concentration of dissolved uranium and the other plot with water containing enhanced concentration of dissolved uranium. At the end of the growth season, plants were harvested and analysed, along with soil and irrigation water samples. Results show the accumulation of radionuclides in edible parts of plants, specially in the field plots with higher radionuclide concentrations in soil. Radionuclides in irrigation water contributed less to the radioactivity accumulated in plants than radionuclides from soils. (authors)

  1. NCIPLOT: a program for plotting non-covalent interaction regions

    PubMed Central

    Contreras-García, Julia; Johnson, Erin R.; Keinan, Shahar; Chaudret, Robin; Piquemal, Jean-Philip; Beratan, David N.; Yang, Weitao

    2011-01-01

    Non-covalent interactions hold the key to understanding many chemical, biological, and technological problems. Describing these non-covalent interactions accurately, including their positions in real space, constitutes a first step in the process of decoupling the complex balance of forces that define non-covalent interactions. Because of the size of macromolecules, the most common approach has been to assign van der Waals interactions (vdW), steric clashes (SC), and hydrogen bonds (HBs) based on pairwise distances between atoms according to their van der Waals radii. We recently developed an alternative perspective, derived from the electronic density: the Non-Covalent Interactions (NCI) index [J. Am. Chem. Soc. 2010, 132, 6498]. This index has the dual advantages of being generally transferable to diverse chemical applications and being very fast to compute, since it can be calculated from promolecular densities. Thus, NCI analysis is applicable to large systems, including proteins and DNA, where analysis of non-covalent interactions is of great potential value. Here, we describe the NCI computational algorithms and their implementation for the analysis and visualization of weak interactions, using both self-consistent fully quantum-mechanical, as well as promolecular, densities. A wide range of options for tuning the range of interactions to be plotted is also presented. To demonstrate the capabilities of our approach, several examples are given from organic, inorganic, solid state, and macromolecular chemistry, including cases where NCI analysis gives insight into unconventional chemical bonding. The NCI code and its manual are available for download at http://www.chem.duke.edu/~yang/software.htm PMID:21516178

  2. Dalitz Plot Analysis of B+- --> pi+-pi+-pi-+ Decays

    SciTech Connect

    Collaboration, The BABAR; Aubert, B.

    2009-02-23

    The authors present a Dalitz-plot analysis of charmless B{sup {+-}} decays to the final state {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}} using a sample of (465 {+-} 5) x 10{sup 6} B{bar B} pairs collected by the BABAR experiment at {radical}s = 10.58 GeV. They measure the branching fractions {Beta}(B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}}) = (15.2 {+-} 0.6 {+-} 1.2 {+-} 0.4) x 10{sup -6}, {Beta}(B{sup {+-}} {yields} {rho}{sup 0}(770){pi}{sup {+-}}) = (8.1 {+-} 0.7 {+-} 1.2{sub -1.1}{sup +0.4}) x 10{sup -6}, {Beta}(B{sup {+-}} {yields} f{sub 2}(1270){pi}{sup {+-}}) = (1.57 {+-} 0.42 {+-} 0.16{sub -0.19}{sup +0.53}) x 10{sup -6}, and {Beta}(B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup {+-}}{pi}{sup {-+}} nonresonant) = (5.3 {+-} 0.7 {+-} 0.6{sub -0.5}{sup +1.1}) x 10{sup -6}, where the uncertainties are statistical, systematic, and model-dependent, respectively. Measurements of branching fractions for the modes B{sup {+-}} {yields} {rho}{sup 0}(1450){pi}{sup {+-}} and B{sup {+-}} {yields} f{sub 0}(1370){pi}{sup {+-}} are also presented. They observe no significant direct CP asymmetries for the above modes, and there is no evidence for the decays B{sup {+-}} {yields} f{sub 0}(980){pi}{sup {+-}}, B{sup {+-}} {yields} {chi}{sub c0}{pi}{sup {+-}}, or B{sup {+-}} {yields} {chi}{sub c2}{pi}{sup {+-}}.

  3. Energy and Agriculture. A Basic Core Curriculum for Teaching Energy to Vocational Agriculture Students.

    ERIC Educational Resources Information Center

    Albracht, James; French, Byron

    This core curriculum contains five units of material for teaching energy to vocational agriculture students. Energy uses and the benefits of energy conservation are covered in a unit on the impact of energy on agriculture. Discussed next are tractor performance and Nebraska tractor test data for selecting and evaluating tractors for maximum fuel…

  4. Modules in Agricultural Education for Agricultural Mechanics.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

    Each of the 38 curriculum modules in this packet for agricultural mechanics instruction contains a brief description of the module content, a list of the major divisions or units, the overall objectives, objectives by unit, content outline and suggested teaching methods, student application activities, and evaluation procedures. A listing of…

  5. Modules in Agricultural Education for Agricultural Resources.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

    Each of the 31 curriculum modules in this packet for agricultural resources instruction contains a brief description of the module content, a list of the major division or units, the overall objective, objectives by units, content outline and suggested teaching methods, student application activities, and evaluation procedures. A list of resource…

  6. Global Transformations and Agriculture.

    ERIC Educational Resources Information Center

    Campbell, Rex R.

    1990-01-01

    Examines worldwide political, economic, and social transformations and their impact on agriculture, focusing on biotechnology. Discusses rise of international corporations and accompanying constraints on government power. Sees trend toward increasing agribusiness role in world food and agricultural sectors. Calls for broader views and research in…

  7. Agriculture Power and Machinery.

    ERIC Educational Resources Information Center

    Rogers, Tom

    This guide is intended to assist vocational agriculture teachers who are teaching secondary- or postsecondary-level courses in agricultural power and machinery. The materials presented are based on the Arizona validated occupational competencies and tasks for the following occupations: service manager, shop foreman, service technician, and tractor…

  8. Precision agricultural systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Precision agriculture is a new farming practice that has been developing since late 1980s. It has been variously referred to as precision farming, prescription farming, site-specific crop management, to name but a few. There are numerous definitions for precision agriculture, but the central concept...

  9. Theme: Marketing Agricultural Education.

    ERIC Educational Resources Information Center

    Staller, Bernie L.; And Others

    1988-01-01

    Consists of six articles on marketing agricultural education. Topics include (1) being consumer conscious, (2) cooperating with agribusiness, (3) preparing students for postsecondary education, (4) allowing concurrent enrollments, (5) saving the failing agricultural program, and (6) refocusing the curriculum toward agrimarketing. (CH)

  10. Agricultural Occupations Handbook.

    ERIC Educational Resources Information Center

    Lark, Floyd J.; Henderson, Billie

    This agricultural occupations handbook was developed from the Dictionary of Occupational Titles (DOT) and the U.S. Departments of Health, Education, and Welfare, and Labor publication, Vocational Education and Occupations. It includes the U.S. Office of Education coding for the instructional area of agriculture and the cluster coding for the…

  11. Vocational Agriculture I.

    ERIC Educational Resources Information Center

    Patton, Bob; Harp, Keith

    These course materials are designed to provide a foundation of basic knowledge in production agriculture as a prelude to further education in vocational agriculture. The guide contains 6 sections and 22 units of instruction. Each unit includes all or most of eight basic components: performance objectives, suggested activities for the teacher,…

  12. Agriculture in the Midwest

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Agriculture in the Midwest United States (Illinois, Indiana, Iowa, Michigan, Minnesota, Ohio, and Wisconsin) represents one of the most intense areas of agriculture in the world. This area is not only critically important for the United States, but also for world exports of grain and meat for the Un...

  13. USSR Report Agriculture

    DTIC Science & Technology

    2007-11-02

    the last century one of the first Russian agronomists, M. G. Pavlov , in speaking about efficient agriculture, was asked the question, is agriculture...three are agronomists in enterprises--Nikolay Georgiyevich Kovalev, Fedor Akimovich Ivashchenko and Ivan Kirillovich Okhrimenko. All three work under the

  14. Revisiting Supervised Agricultural Experience.

    ERIC Educational Resources Information Center

    Camp, William G.; Clarke, Ariane; Fallon, Maureen

    2000-01-01

    A Delphi panel of 40 agricultural educators unanimously agreed that supervised agricultural experience should remain an integral component of the curriculum; a name change is not currently warranted. Categories recommended were agribusiness entrepreneurship, placement, production, research, directed school lab, communications, exploration, and…

  15. Agricultural Technology Opportunities.

    ERIC Educational Resources Information Center

    North Carolina State Board of Education, Raleigh. Agricultural Technology Education Section.

    Agricultural education programs available through North Carolina's newly created system of industrial education center, technical institutes, and community colleges are described. The information is for use by administrators, and teachers of adult agricultural courses and counselors of high school dropouts and graduates. It describes the need for…

  16. Invasive species in agriculture

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Agricultural production of food, feed, fiber or fuel is a local human activity with global ecological impacts, including the potential to foster invasions. Agriculture plays an unusual role in biological invasions, in that it is both a source of non-indigenous invasive species (NIS) and especially s...

  17. Theme: Urban Agriculture.

    ERIC Educational Resources Information Center

    Ellibee, Margaret; And Others

    1990-01-01

    On the theme of secondary agricultural education in urban areas, this issue includes articles on opportunities, future directions, and implications for the profession; creative supervised experiences for horticulture students; floral marketing, multicultural education; and cultural diversity in urban agricultural education. (JOW)

  18. Detecting agricultural to urban land use change from multi-temporal MSS digital data. [Salt Lake County, Utah

    NASA Technical Reports Server (NTRS)

    Ridd, M. K.; Merola, J. A.; Jaynes, R. A.

    1983-01-01

    Conversion of agricultural land to a variety of urban uses is a major problem along the Wasatch Front, Utah. Although LANDSAT MSS data is a relatively coarse tool for discriminating categories of change in urban-size plots, its availability prompts a thorough test of its power to detect change. The procedures being applied to a test area in Salt Lake County, Utah, where the land conversion problem is acute are presented. The identity of land uses before and after conversion was determined and digital procedures for doing so were compared. Several algorithms were compared, utilizing both raw data and preprocessed data. Verification of results involved high quality color infrared photography and field observation. Two data sets were digitally registered, specific change categories internally identified in the software, results tabulated by computer, and change maps printed at 1:24,000 scale.

  19. Spatial probability of soil water repellency in an abandoned agricultural field in Lithuania

    NASA Astrophysics Data System (ADS)

    Pereira, Paulo; Misiūnė, Ieva

    2015-04-01

    Water repellency is a natural soil property with implications on infiltration, erosion and plant growth. It depends on soil texture, type and amount of organic matter, fungi, microorganisms, and vegetation cover (Doerr et al., 2000). Human activities as agriculture can have implications on soil water repellency (SWR) due tillage and addition of organic compounds and fertilizers (Blanco-Canqui and Lal, 2009; Gonzalez-Penaloza et al., 2012). It is also assumed that SWR has a high small-scale variability (Doerr et al., 2000). The aim of this work is to study the spatial probability of SWR in an abandoned field testing several geostatistical methods, Organic Kriging (OK), Simple Kriging (SK), Indicator Kriging (IK), Probability Kriging (PK) and Disjunctive Kriging (DK). The study area it is located near Vilnius urban area at (54 49' N, 25 22', 104 masl) in Lithuania (Pereira and Oliva, 2013). It was designed a experimental plot with 21 m2 (07x03 m). Inside this area it was measured SWR was measured every 50 cm using the water drop penetration time (WDPT) (Wessel, 1998). A total of 105 points were measured. The probability of SWR was classified in 0 (No probability) to 1 (High probability). The methods accuracy was assessed with the cross validation method. The best interpolation method was the one with the lowest Root Mean Square Error (RMSE). The results showed that the most accurate probability method was SK (RMSE=0.436), followed by DK (RMSE=0.437), IK (RMSE=0.448), PK (RMSE=0.452) and OK (RMSE=0.537). Significant differences were identified among probability tests (Kruskal-Wallis test =199.7597 p<0.001). On average the probability of SWR was high with the OK (0.58±0.08) followed by PK (0.49±0.18), SK (0.32±0.16), DK (0.32±0.15) and IK (0.31±0.16). The most accurate probability methods predicted a lower probability of SWR in the studied plot. The spatial distribution of SWR was different according to the tested technique. Simple Kriging, DK, IK and PK methods

  20. Searsville Sediment Experiment: What is the ideal agricultural soil?

    NASA Astrophysics Data System (ADS)

    Leal, J.; Lo, D.; Patel, N.; Gu, S.

    2014-12-01

    The purpose of this experiment is to decide whether or not the sediment located within Searsville Dam at the Jasper Ridge Biological Preserve is well suited for agricultural soil. By utilizing various combinations of sediment, farm soil, compost, and horse manure to grow basil plants, we underwent an exploratory study in order to better understand what type of materials and nutrients plants can best thrive within. Our general experiment protocol includes watering the crops with irrigation every day while young, and then limiting that water exposure to only Mondays, Wednesdays, and Fridays as they become more established. The basil is growing in pots filled with the different amounts of material, and are arranged randomly to prevent certain plants from getting more sunlight than others. The whole experiment plot is covered with a thin white fabric and secured with bricks and wood to keep out pests in the garden. In order to observe trends in the basil development, plant height and leaf number is recorded once every week. During the third week of the study we performed soil texture tests, and within the fourth week we calculated pH data. We discovered that the sediment our project focuses upon is 10-18% clay and 50% sand which categorizes it as loam, and the Stanford farm soil that serves as our control group contains 20-26% clay and 30% sand so it is a silt loam material. The pH tests also showed an average of 7.45 for sediment, 7.3 for farm soil, 7.85 for compost, and 7.65 for horse manure. By looking at all of the data recorded over the five-week time period, we have so far noticed that the 50% sediment and 50% horse manure combination consistently has the best height increase as well as leaf size and content. The 50% sediment and 50% compost mixture has also performed well in those terms, and is therefore a possibility for the best agricultural soil. However, future lab work conducted by Stanford students to examine the nutrient content of the basil tissue, along

  1. Suppressing the truth as a mechanism of deception: Delta plots reveal the role of response inhibition in lying.

    PubMed

    Debey, Evelyne; Ridderinkhof, Richard K; De Houwer, Jan; De Schryver, Maarten; Verschuere, Bruno

    2015-12-01

    Lying takes more time than telling the truth. Because lying involves withholding the truth, this "lie effect" has been related to response inhibition. We investigated the response inhibition hypothesis of lying using the delta-plot method: A leveling-off of the standard increase of the lie effect with slower reaction times would be indicative of successful response inhibition. Participants performed a reaction-time task that required them to alternate between lying and truth telling in response to autobiographical questions. In two experiments, we found that the delta plot of the lie effect leveled off with longer response latencies, but only in a group of participants who had better inhibitory skills as indexed by relatively small lie effects. This finding supports the role of response inhibition in lying. We elaborate on repercussions for cognitive models of deception and the data analysis of reaction-time based lie tests.

  2. Effectiveness of aerial- and ground-applied Bacillus formulations against Anopheles quadrimaculatus larvae in Arkansas rice plots.

    PubMed

    Dennett, J A; Meisch, M V

    2000-09-01

    Experimental Bacillus larvicides designed to float on or near the water surface were compared to labeled standard Bacillus corn-cob-based larvicides using sentinel Anopheles quadrimaculatus larvae in Arkansas rice plots during the 1998 growing season. Experimental floating formulations of Bacillus thuringiensis israelensis applied at 5.58 and 11.18 kg/ha provided up to 100% control of 3rd- and 4th-stage Anopheles larvae within 24-48 h, whereas the water-dispersible granule formulations containing Bacillus sphaericus required 48-72 h to yield >75% mortality in 0.16-ha plots at 11.18 kg/ha. Detecting and targeting the smaller developmental stages (1st- and 2nd-stage larvae) could increase the effectiveness of the tested compounds against An. quadrimaculatus in Arkansas and other rice-growing regions.

  3. Development of a dynamic recrystallization model for a β-solidifying titanium aluminide alloy using Kocks-Mecking plots

    NASA Astrophysics Data System (ADS)

    Bambach, Markus; Sizova, Irina; Bolz, Sebastian; Weiß, Sabine

    2016-10-01

    Intermetallic titanium aluminide alloys are of growing interest for aerospace and automotive industries due to their remarkable mechanical properties at elevated temperature. The present study focusses on the investigation of the high-temperature deformation behavior of an intermetallic alloy with the nominal composition Ti-44.5Al-6.25Nb-0.8Mo-0.1B. Isothermal compression tests were conducted on a Gleeble 3500 simulator. The flow curves were transformed into Kocks-Mecking plots, where remarkable features such as the absence of stage-III hardening and an inflection point marking the onset of dynamic recrystallization were observed. Based on these observations, a phenomenological flow stress model was devised which incorporates the observations revealed through the Kocks-Mecking plots and reproduces the course of flow stress up to the peak stress and towards the steady-state well. The model may hence be used in finite element simulations of isothermal forging of titanium aluminides.

  4. Volatile Semiochemicals Increase Trap Catch of Green Lacewings (Neuroptera: Chrysopidae) and Flower Flies (Diptera: Syrphidae) in Corn and Soybean Plots.

    PubMed

    Hesler, Louis S

    2016-01-01

    This study reports on the attractiveness of volatile chemicals to green lacewings (Neuroptera: Chrysopidae) and flower flies (Diptera: Syrphidae) as measured by catch on yellow sticky traps within corn [Zea mays L. (Cyperales: Poaceae)] and soybean [Glycine max (L.) Merr. (Fabales: Fabaceae)] plots. Green lacewings were attracted to eugenol-baited traps in two tests in soybean plots. Follow-up testing in corn showed that catch of green lacewings was enhanced when traps were baited with eugenol, its structural analog isoeugenol, or 2-phenylethanol; trap catch of green lacewings was greater with these compounds than with structural analog, 4-alllylanisole. In a follow-up test in soybean, more green lacewings were caught on traps baited with isoeugenol than with 4-allylanisole. Catch did not differ among traps baited with eugenol, isoeugenol, or 2-phenylethanol or among those baited with eugenol, 2-phenylethanol, or the ethanol control. In a 6-wk experiment in soybean, green lacewings were attracted to eugenol-baited traps in 5 of 6 wks but to traps baited with structural analog methyl eugenol in only 1 wk. Flower flies were attracted to 2-phenylethanol in initial tests in corn and soybean plots. Subsequent testing in soybeans with 2-phenylethanol and structural analogs confirmed attraction to 2-phenylethanol and also showed attractancy of 2-phenylacetaldehyde but not benzylamine. A 6-wk test in soybean found that flower flies were also attracted to traps baited with either eugenol or methyl eugenol. This is the first report of green lacewing attraction to eugenol and isoeugenol and first report of flower fly attraction to eugenol. Structure-activity relationships among attractants and practical aspects of their use are discussed.

  5. Volatile Semiochemicals Increase Trap Catch of Green Lacewings (Neuroptera: Chrysopidae) and Flower Flies (Diptera: Syrphidae) in Corn and Soybean Plots

    PubMed Central

    Hesler, Louis S.

    2016-01-01

    This study reports on the attractiveness of volatile chemicals to green lacewings (Neuroptera: Chrysopidae) and flower flies (Diptera: Syrphidae) as measured by catch on yellow sticky traps within corn [Zea mays L. (Cyperales: Poaceae)] and soybean [Glycine max (L.) Merr. (Fabales: Fabaceae)] plots. Green lacewings were attracted to eugenol-baited traps in two tests in soybean plots. Follow-up testing in corn showed that catch of green lacewings was enhanced when traps were baited with eugenol, its structural analog isoeugenol, or 2-phenylethanol; trap catch of green lacewings was greater with these compounds than with structural analog, 4-alllylanisole. In a follow-up test in soybean, more green lacewings were caught on traps baited with isoeugenol than with 4-allylanisole. Catch did not differ among traps baited with eugenol, isoeugenol, or 2-phenylethanol or among those baited with eugenol, 2-phenylethanol, or the ethanol control. In a 6-wk experiment in soybean, green lacewings were attracted to eugenol-baited traps in 5 of 6 wks but to traps baited with structural analog methyl eugenol in only 1 wk. Flower flies were attracted to 2-phenylethanol in initial tests in corn and soybean plots. Subsequent testing in soybeans with 2-phenylethanol and structural analogs confirmed attraction to 2-phenylethanol and also showed attractancy of 2-phenylacetaldehyde but not benzylamine. A 6-wk test in soybean found that flower flies were also attracted to traps baited with either eugenol or methyl eugenol. This is the first report of green lacewing attraction to eugenol and isoeugenol and first report of flower fly attraction to eugenol. Structure-activity relationships among attractants and practical aspects of their use are discussed. PMID:27531905

  6. Poincare Plots and Symbolic Dynamics Patterns of Left Ventricular Function Parameters Extracted From Echocardiographic Acoustic Quantification

    DTIC Science & Technology

    2007-11-02

    N/A Dates Covered (from... to) - Title and Subtitle Poincare Plots and Symbolic Dynamics Patterns of Left Ventricular Function Parameters...IV. POINCARE ’ PLOTS ANALYSIS Poincarè plot analysis is a simple and robust graphical technique based on the analysis of the maps obtained by...Fortuin, et al. Ecocardiographic assessment of a normal adult aging population. Circulation 1977;56:273-278. [13] J.M. Gardin, W.L. Henry , D.D. Savage, J

  7. Carbon-sulfur plots to show diagenetic and epigenetic sulfidation in sediments

    NASA Astrophysics Data System (ADS)

    Leventhal, Joel S.

    1995-03-01

    Organic carbon vs. sulfide sulfur plots are now being used regularly by many geochemists to help understand recent and ancient depositional environments and diagenetic processes. Usually, these plots are useful to recognize nonmarine vs. marine environments or oxic vs. anoxic vs. euxinic depositional environments. However, C vs. S plots can also indicate diagenetic and epigenetic events that produce “excess” sulfide. Four new examples are presented and discussed.

  8. Development of a database of quick-look plots for the earth and space science data

    NASA Astrophysics Data System (ADS)

    Saito, A.; Tsugawa, T.; Yoshida, D.; Akiya, Y.

    2010-12-01

    A database of quick-look plots of the earth and space science data has been developed and called DAGIK (Data-showcase system for Geoscience in KML). Although there are many projects that make the access and usage of the earth and space data much easier, the users still have difficulties to find the data with that they are not familiar. Quick-look plot is an easy way to show the novice users outline of the data; how the data looks like, when and where the data was observed. Most of the databases of the earth and space data provide quick-look plot on their WWW sites to help users to browse the data. As the metadata bases help to find data, a "one-stop" database of quick-look plots is useful for users to find data that the users don't use regularly. To construct such a database of quick-look plots, metadata of the plots should be embedded in the plot files. KML is one of the data formats that can contain plots and metadata. It is in XML. There are several browsers of KML, such as Google Earth and NASA world wind. DAGIK is a network-based database using KML files for the geoscience plots. We term such database of quick-look plots as "data-showcase system". It is a showcase of data for users to browse. The users who find an interesting data will use database or meta database following the link in the quick-look plots that contains metadata. We believe that the metadata of plots is a useful tool for easy data access as the metadata of data. In the presentation, we introduce DAGIK as an implementation of the data-showcase system.

  9. On the representativeness of plot size and location for scaling transpiration from trees to a stand

    NASA Astrophysics Data System (ADS)

    Mackay, D. Scott; Ewers, Brent E.; Loranty, Michael M.; Kruger, Eric L.

    2010-06-01

    Scaling transpiration from trees to larger areas is a fundamental problem in ecohydrology. For scaling stand transpiration from sap flux sensors we asked if plot representativeness depended on plot size and location, the magnitude of environmental drivers, parameter needs for ecosystem models, and whether the goal was to estimate transpiration per unit ground area (EC), per unit leaf area (EL), or canopy stomatal conductance (GS). Sap flux data were collected in 108 trees with heat dissipation probes, and biometric properties were measured for 752 trees within a 1.44 ha Populus tremuloides stand along an upland-to-wetland gradient. EC was estimated for the stand using eight different plot sizes spanning a radius of 2.0-12.0 m. Each estimate of EC was derived from 200 plots placed randomly throughout the stand. We also derived leaf area index (L), canopy closure (PCC), and the canopy average reference stomatal conductance (GSref), which are key parameters used in modeling transpiration and evapotranspiration. With increasing plot size, EC declined monotonically but EL and GSref were largely invariant. Interplot variance of EC also declined with increasing plot size, at a rate that was independent of vapor pressure deficit. Plot representativeness was dependent on location within the stand. Scaling to the stand required three plots spanning the upland to wetland, with one to at most 10 trees instrumented for sap flux. Plots that were chosen to accurately reflect the spatial covariation of L, PCC, and GSref were most representative of the stand.

  10. Experimental strategies in carrying out VCU for tobacco crop I: plot design and size.

    PubMed

    Toledo, F H R B; Ramalho, M A P; Pulcinelli, C E; Bruzi, A T

    2013-09-19

    We aimed to establish standards for tobacco Valor de Cultivo e Uso (VCU) in Brazil. We obtained information regarding the size and design of plots of two varietal groups of tobacco (Virginia and Burley). Ten inbred lines of each varietal group were evaluated in a randomized complete block design with four replications. The plot contained 42 plants with six rows of seven columns each. For each experiment plant, considering the position of the respective plant in the plot (row and column) as a reference, cured leaf weight (g/plant), total sugar content (%), and total alkaloid content (%) were determined. The maximum curvature of the variations in coefficients was estimated. Trials with the number of plants per plot ranging from 2 to 41 were simulated. The use of a border was not justified because the interactions between inbred lines x position in the plots were never significant, showing that the behavior of the inbred lines coincided with the different positions. The plant performance varied according to the column position in the plot. To lessen the effect of this factor, the use of plots with more than one row is recommended. Experimental precision, evaluated by the CV%, increased with an increase in plot size; nevertheless, the maximum curvature of the variation coefficient method showed no expressive increase in precision if the number of plants was greater than seven. The result in identification of the best inbred line, in terms of the size of each plot, coincided with the maximum curvature method.

  11. magicaxis: Pretty scientific plotting with minor-tick and log minor-tick support

    NASA Astrophysics Data System (ADS)

    Robotham, Aaron S. G.

    2016-04-01

    The R suite magicaxis makes useful and pretty plots for scientific plotting and includes functions for base plotting, with particular emphasis on pretty axis labelling in a number of circumstances that are often used in scientific plotting. It also includes functions for generating images and contours that reflect the 2D quantile levels of the data designed particularly for output of MCMC posteriors where visualizing the location of the 68% and 95% 2D quantiles for covariant parameters is a necessary part of the post MCMC analysis, can generate low and high error bars, and allows clipping of values, rejection of bad values, and log stretching.

  12. Using UAV data for soil surface change detection at a loess field plot

    NASA Astrophysics Data System (ADS)

    Eltner, Anette; Baumgart, Philipp

    2014-05-01

    Application of unmanned aerial vehicles (UAV) denotes an increasing interest in geosciences due to major developments within the last years. Today, UAV are economical, reliable and flexible in usage. They provide a non-invasive method to measure the soil surface and its changes - e.g. due to erosion - with high resolution. Advances in digital photogrammetry and computer vision allow for fast and dense digital surface reconstruction from overlapping images. The study site is located in the Saxonian loess (Germany). The area is fragile due to erodible soils and intense agricultural utilisation. Hence, detectable soil surface changes are expected. The size of the field plot is 20 x 30 meters and the period of investigation lasts from October 2012 till July 2013 at which four surveys were performed. The UAV deployed in this study is equipped with a compact camera which is attached to an active stabilising camera mount. In addition, the micro drone integrates GPS and IMU that enables autonomous surveys with programmed flight patterns. About 100 photos are needed to cover the study site at a minimal flying height of eight metres and 65%/80% image overlap. For multi-temporal comparison a stable local reference system is established. Total station control of the signalised ground control points confirms two mm accuracy for the study period. To estimate the accuracy of the digital surface models (DSM) derived from the UAV images a comparison to DSM from terrestrial laser scanning (TLS) is conducted. The standard deviation of differences amounts five millimetres. To analyse surface changes methods from image processing are applied to the DSM. Erosion rills could be extracted for quantitative and qualitative consideration. Furthermore, volumetric changes are measured. First results indicate levelling processes during the winter season and reveal rill and inter-rill erosion during spring and summer season.

  13. Effects of land use on of soil micronutrients at the plot scale in an acid environment

    NASA Astrophysics Data System (ADS)

    Paz González, A.; Vidal Vázquez, E.; de Abreu, C. A.

    2012-04-01

    Land use practices affect soil properties and nutrient supply. Very limited data are available on the heavy metal extractability in northwest Spain. The aim of this study is to analyze long-term effects of land use on the supply, variability and spatial distribution of soil nutrients, which was undertaken by comparison of a forest and a cultivated stand, rich in organic matter content. The study was carried out in an acid, rich in organic matter soil developed over sediments at the province of Lugo, northwestern of Spain. Adjacent plots with were marked on regular square grids with 2-m spacing. Fe, Mn, Zn and Cu were extracted both by Mehlich-3 and DTPA solutions and determined by ICP-MS. General soil chemical and physical properties were routinely analyzed. In arable land microelement concentration ranges were as follows: Fe (100 and 135 mg/Kg), Mn (7.6 and 21.5 mg/Kg), Zn (0.6 and 3.7 mg/Kg), Cu (0.2 and 0.7 mg/Kg). In forest land, the limits for these concentration were: Fe (62 and 309 mg/Kg), Mn (0.2 and 2.1 mg/Kg), Zn (0.2 and 2.9 mg/Kg), Cu (0.1 and 0.2 mg/Kg), Microelement concentrations extracted both with DTPA and Mehlich-3 were higher in the cultivated than in the forest stand, being Fe-DTPA the exception. Coefficients of variation were higher for the microelement content of the soil under forest. Principal component analysis was performed to evaluate associations between extractable microelements and general physico-chemical properties. At the study scale, nutrient management is the main factor affecting the agricultural site, whereas soil-plant interactions are probably driving the higher variation within the forest site. Results are discussed in the frame of organic matter decline with conventional tillage and sustainable land use.

  14. Modified Brown-Forsythe Procedure for Testing Interaction Effects in Split-Plot Designs

    ERIC Educational Resources Information Center

    Vallejo, Guillermo; Ato, Manuel

    2006-01-01

    The standard univariate and multivariate methods are conventionally used to analyze continuous data from groups by trials repeated measures designs, in spite of being extremely sensitive to departures from the multisample sphericity assumption when group sizes are unequal. However, in the last 10 years several authors have offered alternative…

  15. Visualizing Changes in Pretest and Post-Test Student Responses with Consistency Plots

    ERIC Educational Resources Information Center

    Wittmann, Michael C.; Black, Katrina E.

    2014-01-01

    Tabular presentations of student data often hide information about the switches in responses by individual students over the course of a semester. We extend unpublished work by Kanim on "escalator diagrams," which show changes in student responses from correct to incorrect (and vice versa) while representing pre- and postinstruction…

  16. [Primary Study on Predicting the Termination of Paroxysmal Atrial Fibrillation Based on a Novel RdR RR Intervals Scatter Plot].

    PubMed

    Lu, Hongwei; Zhang, Chenxi; Sun, Ying; Hao, Zhidong; Wang, Chunfang; Tian, Jiajia

    2015-08-01

    Predicting the termination of paroxysmal atrial fibrillation (AF) may provide a signal to decide whether there is a need to intervene the AF timely. We proposed a novel RdR RR intervals scatter plot in our study. The abscissa of the RdR scatter plot was set to RR intervals and the ordinate was set as the difference between successive RR intervals. The RdR scatter plot includes information of RR intervals and difference between successive RR intervals, which captures more heart rate variability (HRV) information. By RdR scatter plot analysis of one minute RR intervals for 50 segments with non-terminating AF and immediately terminating AF, it was found that the points in RdR scatter plot of non-terminating AF were more decentralized than the ones of immediately terminating AF. By dividing the RdR scatter plot into uniform grids and counting the number of non-empty grids, non-terminating AF and immediately terminating AF segments were differentiated. By utilizing 49 RR intervals, for 20 segments of learning set, 17 segments were correctly detected, and for 30 segments of test set, 20 segments were detected. While utilizing 66 RR intervals, for 18 segments of learning set, 16 segments were correctly detected, and for 28 segments of test set, 20 segments were detected. The results demonstrated that during the last one minute before the termination of paroxysmal AF, the variance of the RR intervals and the difference of the neighboring two RR intervals became smaller. The termination of paroxysmal AF could be successfully predicted by utilizing the RdR scatter plot, while the predicting accuracy should be further improved.

  17. Detecting gravesoil with headspace analysis with adsorption on short porous layer open tubular (PLOT) columns.

    PubMed

    Lovestead, Tara M; Bruno, Thomas J

    2011-01-30

    Victims of crimes are often buried in clandestine graves. There are several techniques for finding buried bodies or the scattered remains of a victim; however, none of these methods are very reliable or work in all scenarios. One way to detect gravesoil is to detect the biochemical changes of the surrounding soil due to cadaver decomposition, for example, the release of nitrogenous compounds. A simple and low-cost way to detect these compounds is based on the reaction of alpha amino groups with ninhydrin to form Ruhemann's purple. This test for ninhydrin-reactive nitrogen (NRN) has, to date, only been performed by direct solvent extraction of soil samples. Here, we present a method that detects trace quantities of NRN in the headspace air above gravesoil. Our method is based on an improved purge and trap method developed in our lab for sampling low volatility compounds, as well as volatile compounds at trace quantities, by applying low temperature collection on short alumina-coated porous layer open tubular (PLOT) columns. We modified this method to sample the headspace air above gravesoil with a motorized pipetter and a PLOT column at ambient temperatures. We generated gravesoil using rat cadavers and local soil. Trace quantities of NRN were successfully detected in the headspace air above gravesoil. We report the quantities of NRN recovered for buried rats, rats laid on top of soil, and blank graves (no rats) as a function of time (weeks to months). This work is the first (and thus far, only) example of a method for detecting NRN in the vapor phase, providing another tool for forensic investigators to aid in locating elusive clandestine graves.

  18. Comparison of N2O fluxes measured using flux-gradient, eddy-covariance, and chamber methods from an agricultural site

    NASA Astrophysics Data System (ADS)

    Brown, S. E.; Sargent, S.; Machado, P.; Freemantle, V.; Carvalho de Sena Rabelo, L.; Wagner-Riddle, C.

    2015-12-01

    Nitrous oxide emissions from agricultural lands occur as pulses at short intervals during various times throughout a given year, with the timing and magnitude dependent on management, soil, and climatic conditions. A thorough assessment of N2O emissions from fertilized fields requires methods capable of measuring fluxes at large temporal and spatial scales. A study investigating the effect of fertilizer treatment on the total annual N2O emissions from cornfields in Southern, Ontario, Canada provided the setting to analyze three methods for measuring N2O fluxes. Four 2-ha plots within a homogeneous 30-ha area were each subject to different nitrogen fertilizer source and timing treatments. N2O fluxes were measured using eddy-covariance (EC), multi-plot flux gradient (FG), and chamber techniques. Each method has advantages and disadvantages. Eddy-covariance is a standard method for measuring fluxes at the resolutions required to assess trace gas emissions, but the erratic nature of agricultural N2O fluxes necessitates testing of N2O analyzers, and the application of the EC method to N2O fluxes. This study acted as a field test of the Campbell Scientific TGA200A tunable diode trace gas analyzer. Testing the TGA200A against a TGA100A provided two simultaneous EC-flux measurements of N2O for one plot. Multi-plot FG measurements have the advantage of providing year-round, spatiality integrated, semi-continuous fluxes for side-by-side comparisons of N2O fluxes from separate treatments under similar climatic and soil conditions, but is a less common practice. Chambers have the advantage of being the most direct means of measuring soil fluxes; however, spatial resolution is low, and winter measurements are often impossible. Preliminary results showed that temporal patterns measured by each of the methods matched for three post-fertilizer N2O emission events of one plot. EC fluxes of N2O measured by each of the TGA analyzers correlated well (r2 = 0.90) and values were on

  19. SeqPlots - Interactive software for exploratory data analyses, pattern discovery and visualization in genomics.

    PubMed

    Stempor, Przemyslaw; Ahringer, Julie

    2016-01-01

    Experiments involving high-throughput sequencing are widely used for analyses of chromatin function and gene expression. Common examples are the use of chromatin immunoprecipitation for the analysis of chromatin modifications or factor binding, enzymatic digestions for chromatin structure assays, and RNA sequencing to assess gene expression changes after biological perturbations. To investigate the pattern and abundance of coverage signals across regions of interest, data are often visualized as profile plots of average signal or stacked rows of signal in the form of heatmaps. We found that available plotting software was either slow and laborious or difficult to use by investigators with little computational training, which inhibited wide data exploration. To address this need, we developed SeqPlots, a user-friendly exploratory data analysis (EDA) and visualization software for genomics. After choosing groups of signal and feature files and defining plotting parameters, users can generate profile plots of average signal or heatmaps clustered using different algorithms in a matter of seconds through the graphical user interface (GUI) controls. SeqPlots accepts all major genomic file formats as input and can also generate and plot user defined motif densities. Profile plots and heatmaps are highly configurable and batch operations can be used to generate a large number of plots at once. SeqPlots is available as a GUI application for Mac or Windows and Linux, or as an R/Bioconductor package. It can also be deployed on a server for remote and collaborative usage. The analysis features and ease of use of SeqPlots encourages wide data exploration, which should aid the discovery of novel genomic associations.

  20. SeqPlots - Interactive software for exploratory data analyses, pattern discovery and visualization in genomics

    PubMed Central

    2016-01-01

    Experiments involving high-throughput sequencing are widely used for analyses of chromatin function and gene expression. Common examples are the use of chromatin immunoprecipitation for the analysis of chromatin modifications or factor binding, enzymatic digestions for chromatin structure assays, and RNA sequencing to assess gene expression changes after biological perturbations. To investigate the pattern and abundance of coverage signals across regions of interest, data are often visualized as profile plots of average signal or stacked rows of signal in the form of heatmaps. We found that available plotting software was either slow and laborious or difficult to use by investigators with little computational training, which inhibited wide data exploration. To address this need, we developed SeqPlots, a user-friendly exploratory data analysis (EDA) and visualization software for genomics. After choosing groups of signal and feature files and defining plotting parameters, users can generate profile plots of average signal or heatmaps clustered using different algorithms in a matter of seconds through the graphical user interface (GUI) controls. SeqPlots accepts all major genomic file formats as input and can also generate and plot user defined motif densities. Profile plots and heatmaps are highly configurable and batch operations can be used to generate a large number of plots at once. SeqPlots is available as a GUI application for Mac or Windows and Linux, or as an R/Bioconductor package. It can also be deployed on a server for remote and collaborative usage. The analysis features and ease of use of SeqPlots encourages wide data exploration, which should aid the discovery of novel genomic associations. PMID:27918597