Science.gov

Sample records for agua pressurizada integral

  1. Agua Caliente and Their Music.

    ERIC Educational Resources Information Center

    Ryterband, Roman

    1979-01-01

    Discusses the traditional music of the Agua Caliente band of California's Desert Cahuilla Indian tribe, including accompanying instruments, types of songs, thematic material, and performance routines. Exploring the structure of the music, the article describes meter, tempo, harmony and tonal gravitations, and use of words. (DS)

  2. AGUA TIBIA PRIMITIVE AREA, CALIFORNIA.

    USGS Publications Warehouse

    Irwin, William P.; Thurber, Horace K.

    1984-01-01

    The Agua Tibia Primitive Area in southwestern California is underlain by igneous and metamorphic rocks that are siilar to those widely exposed throughout much of the Peninsular Ranges. To detect the presence of any concealed mineral deposits, samples of stream sediments were collected along the various creeks that head in the mountain. As an additional aid in evaluating the mineral potential, an aeromagnetic survey was made and interpreted. A search for records of past or existing mining claims within the primitive area was made but none was found. Evidence of deposits of metallic or nonmetallic minerals was not seen during the study.

  3. 72. Headgates for Agua Fria project canal on east end ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. Headgates for Agua Fria project canal on east end of diversion dam. Photographer Mark Durben. Source: Salt River Project. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  4. 54. Downstream face of Agua Fria project's diversion dam showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    54. Downstream face of Agua Fria project's diversion dam showing initial masonry construction and poured concrete capping. Photographer Mark Durben, 1986. Source: Salt River Project. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  5. 74. View of flume crossing the Agua Fria River from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    74. View of flume crossing the Agua Fria River from the east embankment. Photographer Mark Durben. Source: Salt River Project. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  6. 61. View of the Agua Fria River stream bed from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    61. View of the Agua Fria River stream bed from atop Waddell Dam. Photographer Mark Durben. Source: Salt River Project. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  7. 7. Photocopy of map of the Agua Fria Valley and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Photocopy of map of the Agua Fria Valley and lands to be irrigated by the Agua Fria Water and Land Company. Photographer Mark Durben, 1987 Source: 'Map of the Agua Fria Valley and the Western Portion of the Salt River Valley Showing the System of Reservoirs and Canals of the Agua Fria Water and Land Company and the Land to be Irrigated Thereby 160,000 Acres of New Land to be Reclaimed in the Maricopa County, Arizona Territory,' (Brochure) Union Photo Engraving Company, c. 1895, Salt River Project Research Archives, Tempe, Arizona. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  8. 2. William Beardsley standing along the Agua Fria River near ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. William Beardsley standing along the Agua Fria River near construction site of the Agua Fria project. Photographer James Dix Schuyler, 1903. Source: Schuyler, James D. 'Report on the Water Supply of the Agua Fria River, and the Storage Reservoir Project of the Agua Fria Water and Land Company For Irrigation in the Gila River Valley, Arizona,' (September 29, 1903). Arizona Historical Collection, Hayden Library, Arizona State University, Tempe, Arizona. (Typewritten.) - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  9. Listeria monocytogenes aguA1, but Not aguA2, Encodes a Functional Agmatine Deiminase

    PubMed Central

    Cheng, Changyong; Chen, Jianshun; Fang, Chun; Xia, Ye; Shan, Ying; Liu, Yuan; Wen, Guilan; Song, Houhui; Fang, Weihuan

    2013-01-01

    Listeria monocytogenes is adaptable to low pH environments and therefore crosses the intestinal barrier to establish systemic infections. L. monocytogenes aguA1 and aguA2 encode putative agmatine deiminases (AgDIs) AguA1 and AguA2. Transcription of aguA1 and aguA2 was significantly induced at pH 5.0. Deletion of aguA1 significantly impaired its survival both in gastric fluid at pH 2.5 and in mouse stomach, whereas aguA2 deletion did not show significant defect of survival in gastric fluid. With agmatine as the sole substrate, AguA1 expressed in Escherichia coli was optimal at 25 °C and over a wide range of pH from 3.5 to 10.5. Recombinant AguA2 showed no deiminase activity. Site-directed mutagenesis revealed that all nine AguA1 mutants completely lost enzymatic activity. AguA2 acquired AgDI activity only when Cys-157 was mutated to glycine. AguA1 mutation at the same site, G157C, also inactivated the enzyme. Thus, we have discovered Gly-157 as a novel residue other than the known catalytic triad (Cys-His-Glu/Asp) in L. monocytogenes that is critical for enzyme activity. Of the two putative AgDIs, we conclude that only AguA1 functionally participates in the AgDI pathway and mediates acid tolerance in L. monocytogenes. PMID:23918931

  10. The Agua Salud Project, Central Panama

    NASA Astrophysics Data System (ADS)

    Stallard, R. F.; Elsenbeer, H.; Ogden, F. L.; Hall, J. S.

    2007-12-01

    The Agua Salud Project utilizes the Panama Canal's central role in world commerce to focus global attention on the ecosystem services provided by tropical forests. It will be the largest field experiment of its kind in the tropics aimed at quantifying the environmental services (water, carbon, and biodiversity) provided by tropical forests. The Agua Salud Watershed is our principal field site. This watershed and the headwaters of several adjacent rivers include both protected mature forests and a wide variety of land uses that are typical of rural Panama. Experiments at the scale of entire catchments will permit complete water and carbon inventories and exchanges for different landscape uses. The following questions will be addressed: (1) How do landscape treatments and management approaches affect ecosystem services such as carbon storage, water quality and quantity, dry- season water supply, and biodiversity? (2) Can management techniques be designed to optimize forest production along with ecosystem services during reforestation? (3) Do different tree planting treatments and landscape management approaches influence groundwater storage, which is thought to be critical to maintaining dry-season flow, thus insuring the full operation of the Canal during periods of reduced rainfall and severe climatic events such as El Niño. In addition we anticipate expanding this project to address biodiversity, social, and economic values of these forests.

  11. Lahar hazards at Agua volcano, Guatemala

    USGS Publications Warehouse

    Schilling, S.P.; Vallance, J.W.; Matías, O.; Howell, M.M.

    2001-01-01

    At 3760 m, Agua volcano towers more than 3500 m above the Pacific coastal plain to the south and 2000 m above the Guatemalan highlands to the north. The volcano is within 5 to 10 kilometers (km) of Antigua, Guatemala and several other large towns situated on its northern apron. These towns have a combined population of nearly 100,000. It is within about 20 km of Escuintla (population, ca. 100,000) to the south. Though the volcano has not been active in historical time, or about the last 500 years, it has the potential to produce debris flows (watery flows of mud, rock, and debris—also known as lahars when they occur on a volcano) that could inundate these nearby populated areas.

  12. Secondary natural gas recovery in mature fluvial sandstone reservoirs, Frio Formation, Agua Dulce Field, South Texas

    SciTech Connect

    Ambrose, W.A.; Levey, R.A. ); Vidal, J.M. ); Sippel, M.A. ); Ballard, J.R. ); Coover, D.M. Jr. ); Bloxsom, W.E. )

    1993-09-01

    An approach that integrates detailed geologic, engineering, and petrophysical analyses combined with improved well-log analytical techniques can be used by independent oil and gas companies of successful infield exploration in mature Gulf Coast fields that larger companies may consider uneconomic. In a secondary gas recovery project conducted by the Bureau of Economic Geology and funded by the Gas Research Institute and the U.S. Department of Energy, a potential incremental natural gas resource of 7.7 bcf, of which 4.0 bcf may be technically recoverable, was identified in a 490-ac lease in Agua Dulce field. Five wells in this lease had previously produced 13.7 bcf from Frio reservoirs at depths of 4600-6200 ft. The pay zones occur in heterogeneous fluvial sandstones offset by faults associated with the Vicksburg fault zone. The compartments may each contain up to 1.0 bcf of gas resources with estimates based on previous completions and the recent infield drilling experience of Pintas Creek Oil Company. Uncontacted gas resources occur in thin (typically less than 10 ft) bypassed zones that can be identified through a computed log evaluation that integrates open-hole logs, wireline pressure tests, fluid samples, and cores. At Agua Dulce field, such analysis identified at 4-ft bypassed zone uphole from previously produced reservoirs. This reservoir contained original reservoir pressure and flowed at rates exceeding 1 mmcf/d. The expected ultimate recovery is 0.4 bcf. Methodologies developed in the evaluation of Agua Dulce field can be successfully applied to other mature gas fields in the south Texas Gulf Coast. For example, Stratton and McFaddin are two fields in which the secondary gas recovery project has demonstrated the existence of thin, potentially bypassed zones that can yield significant incremental gas resources, extending the economic life of these fields.

  13. Panama Canal Watershed Experiment- Agua Salud Project

    USGS Publications Warehouse

    Stallard, Robert F.; Ogden, Fred L.; Elsenbeer, Helmut; Hall, Jefferson S.

    2010-01-01

    The Agua Salud Project utilizes the Panama Canal’s (Canal) central role in world commerce to focus global attention on the ecosystem services provided by tropical forests. The Canal was one of the great engineering projects in the world. Completed in 1914, after almost a decade of concerted effort, its 80 km length greatly shortened the voyage between the Atlantic and Pacific Oceans. An entire class of ships, the Panamax, has been constructed to maximize the amount of cargo that can be carried in a Canal passage. In today’s parlance, the Canal is a “green” operation, powered largely by water (Table 1). The locks, three pairs on each end with a net lift of 27 meters, are gravity fed. For each ton of cargo that is transferred from ocean to ocean, about 13 tons of water (m3) are used. Lake Gatún forms much of the waterway in the Canal transect. Hydroelectricity is generated at the Gatún dam, whenever there is surplus water, and at Madden Dam (completed in 1936) when water is transferred from Lake Alhajuela to Lake Gatún. The Canal watershed is the source of drinking water for Panama City and Colon City, at either end of the Canal, and numerous towns in between.

  14. 75 FR 21034 - Notice of Availability of Record of Decision for the Agua Fria National Monument and Bradshaw...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-22

    ... Bureau of Land Management Notice of Availability of Record of Decision for the Agua Fria National... Agua Fria National Monument and Bradshaw-Harquahala Planning Area, located in central Arizona. The... occupied or used portions of the planning area during prehistoric or historic times. The Agua Fria...

  15. Regulation of the alpha-glucuronidase-encoding gene ( aguA) from Aspergillus niger.

    PubMed

    de Vries, R P; van de Vondervoort, P J I; Hendriks, L; van de Belt, M; Visser, J

    2002-09-01

    The alpha-glucuronidase gene aguA from Aspergillus niger was cloned and characterised. Analysis of the promoter region of aguA revealed the presence of four putative binding sites for the major carbon catabolite repressor protein CREA and one putative binding site for the transcriptional activator XLNR. In addition, a sequence motif was detected which differed only in the last nucleotide from the XLNR consensus site. A construct in which part of the aguA coding region was deleted still resulted in production of a stable mRNA upon transformation of A. niger. The putative XLNR binding sites and two of the putative CREA binding sites were mutated individually in this construct and the effects on expression were examined in A. niger transformants. Northern analysis of the transformants revealed that the consensus XLNR site is not actually functional in the aguA promoter, whereas the sequence that diverges from the consensus at a single position is functional. This indicates that XLNR is also able to bind to the sequence GGCTAG, and the XLNR binding site consensus should therefore be changed to GGCTAR. Both CREA sites are functional, indicating that CREA has a strong influence on aguA expression. A detailed expression analysis of aguA in four genetic backgrounds revealed a second regulatory system involved in activation of aguA gene expression. This system responds to the presence of glucuronic and galacturonic acids, and is not dependent on XLNR.

  16. [Water birds from Agua Dulce lake and El Ermitaño estuary, Jalisco, Mexico].

    PubMed

    Hernández Vázquez, Salvador

    2005-01-01

    Waterbird abundance, and seasonal and spatial distribution, were studied in two natural water pools at Jalisco, Mexico, from December 1997 through November 1998. Maximum monthly abundance in Agua Dulce lake and El Ermitaño estuary was 86 471 birds (29 686 in Agua Dulce and 56 785 in Ermitaño), with a total cummulative abundance of 179 808 individuals (66 976 in Agua Dulce and 112 832 in Ermitaño). A total of 87 waterbirds species were recorded, 78 in Agua Dulce and 73 in Ermitaño. The higher species richness and abundance was observed during winter, when migratory species arrived. Most species prefered shallow waters, except seabirds which prefered protected areas such as dunes in Agua Dulce. Other groups, like clucks and related species. prefered low salinity areas, for example in the south-east area of Ermitaño. The higher abundance of the shorehirds was found when the water level on the estuary was low. Herons were seen often at areas with high salinity and influenced by tides (e.g. mouth of Ermitaño).

  17. 76 FR 63614 - Agua Caliente Solar, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Agua Caliente Solar, LLC; Supplemental Notice That Initial Market-Based Rate...-referenced proceeding of Agua Caliente Solar, LLC's application for market-based rate authority, with...

  18. The source, discharge, and chemical characteristics of water from Agua Caliente Spring, Palm Springs, California

    USGS Publications Warehouse

    : Martin, Peter; Contributors: Brandt, Justin; Catchings, Rufus D.; Christensen, Allen H.; Flint, Alan L.; Gandhok, Gini; Goldman, Mark R.; Halford, Keith J.; Langenheim, V.E.; Martin, Peter; Rymer, Michael J.; Schroeder, Roy A.; Smith, Gregory A.; Sneed, Michelle

    2011-01-01

    Numerical models of fluid and temperature flow were developed for the Agua Caliente Spring to (1) test the validity of the conceptual model that the Agua Caliente Spring enters the valley-fill deposits from fractures in the underlying basement complex and rises through more than 800 feet of valley-fill deposits by way of a washed-sand conduit and surrounding low-permeability deposits (spring chimney) of its own making, (2) evaluate whether water-level declines in the regional aquifer will influence the temperature of discharging water, and (3) determine the source of thermal water in the perched aquifer. A radial-flow model was used to test the conceptual model and the effect of water-level declines. The observed spring discharge and temperature could be simulated if the vertical hydraulic conductivity of the spring orifice was about 200 feet per day and the horizontal hydraulic conductivity of the orifice (spring chimney) was about 0.00002 feet per day. The simulated vertical hydraulic conductivity is within the range of values reported for sand; however, the low value simulated for the horizontal hydraulic conductivity suggests that the spring chimney is cemented with increasing depth. Chemical data collected for this study indicate that the water at Agua Caliente Spring is at saturation with respect to both calcite and chalcedony, which provides a possible mechanism for cementation of the spring chimney. A simulated decline of about 100 feet in the regional aquifer had no effect on the simulated discharge of Agua Caliente Spring and resulted in a slight increase in the temperature of the spring discharge. Results from the radial-flow- and three-dimensional models of the Agua Caliente Spring area demonstrate that the distribution and temperature of thermal water in the perched water table can be explained by flow from a secondary shallow-subsurface spring orifice of the Agua Caliente Spring not contained by the steel collector tank, not by leakage from the

  19. Agua Caliente Wind/Solar Project at Whitewater Ranch

    SciTech Connect

    Hooks, Todd; Stewart, Royce

    2014-12-16

    Agua Caliente Band of Cahuilla Indians (ACBCI) was awarded a grant by the Department of Energy (DOE) to study the feasibility of a wind and/or solar renewable energy project at the Whitewater Ranch (WWR) property of ACBCI. Red Mountain Energy Partners (RMEP) was engaged to conduct the study. The ACBCI tribal lands in the Coachella Valley have very rich renewable energy resources. The tribe has undertaken several studies to more fully understand the options available to them if they were to move forward with one or more renewable energy projects. With respect to the resources, the WWR property clearly has excellent wind and solar resources. The DOE National Renewable Energy Laboratory (NREL) has continued to upgrade and refine their library of resource maps. The newer, more precise maps quantify the resources as among the best in the world. The wind and solar technology available for deployment is also being improved. Both are reducing their costs to the point of being at or below the costs of fossil fuels. Technologies for energy storage and microgrids are also improving quickly and present additional ways to increase the wind and/or solar energy retained for later use with the network management flexibility to provide power to the appropriate locations when needed. As a result, renewable resources continue to gain more market share. The transitioning to renewables as the major resources for power will take some time as the conversion is complex and can have negative impacts if not managed well. While the economics for wind and solar systems continue to improve, the robustness of the WWR site was validated by the repeated queries of developers to place wind and/or solar there. The robust resources and improving technologies portends toward WWR land as a renewable energy site. The business case, however, is not so clear, especially when the potential investment portfolio for ACBCI has several very beneficial and profitable alternatives.

  20. 25 CFR 115.106 - Assets of members of the Agua Caliente Band of Mission Indians.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Assets of members of the Agua Caliente Band of Mission Indians. 115.106 Section 115.106 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS IIM Accounts § 115.106 Assets of members of the...

  1. 25 CFR 115.106 - Assets of members of the Agua Caliente Band of Mission Indians.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Assets of members of the Agua Caliente Band of Mission Indians. 115.106 Section 115.106 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS IIM Accounts § 115.106 Assets of members of the...

  2. Geologie study off gravels of the Agua Fria River, Phoenix, AZ

    USGS Publications Warehouse

    Langer, W.H.; Dewitt, E.; Adams, D.T.; O'Briens, T.

    2010-01-01

    The annual consumption of sand and gravel aggregate in 2006 in the Phoenix, AZ metropolitan area was about 76 Mt (84 million st) (USGS, 2009), or about 18 t (20 st) per capita. Quaternary alluvial deposits in the modern stream channel of the Agua Fria River west of Phoenix are mined and processed to provide some of this aggregate to the greater Phoenix area. The Agua Fria drainage basin (Fig. 1) is characterized by rugged mountains with high elevations and steep stream gradients in the north, and by broad alluvial filled basins separated by elongated faultblock mountain ranges in the south. The Agua Fria River, the basin’s main drainage, flows south from Prescott, AZ and west of Phoenix to the Gila River. The Waddel Dam impounds Lake Pleasant and greatly limits the flow of the Agua Fria River south of the lake. The southern portion of the watershed, south of Lake Pleasant, opens out into a broad valley where the river flows through urban and agricultural lands to its confluence with the Gila River, a tributary of the Colorado River.

  3. 25 CFR 115.106 - Assets of members of the Agua Caliente Band of Mission Indians.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Assets of members of the Agua Caliente Band of Mission Indians. 115.106 Section 115.106 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS IIM Accounts § 115.106 Assets of members of the...

  4. 25 CFR 115.106 - Assets of members of the Agua Caliente Band of Mission Indians.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Assets of members of the Agua Caliente Band of Mission Indians. 115.106 Section 115.106 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS IIM Accounts § 115.106 Assets of members of the...

  5. 25 CFR 115.106 - Assets of members of the Agua Caliente Band of Mission Indians.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Assets of members of the Agua Caliente Band of Mission Indians. 115.106 Section 115.106 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES TRUST FUNDS FOR TRIBES AND INDIVIDUAL INDIANS IIM Accounts § 115.106 Assets of members of the...

  6. Flood of February 1980 along the Agua Fria River, Maricopa County, Arizona

    USGS Publications Warehouse

    Thomsen, B.W.

    1980-01-01

    The flood of February 20, 1980, along the Agua Fria River below Waddell Dam, Maricopa County, Ariz., was caused by heavy rains during February 13-20. The runoff filled Lake Pleasant and resulted in the largest release--66,600 cubic feet per second--from the reservoir since it was built in 1927; the maximum inflow to the reservoir was about 73,300 cubic feet per second. The area inundated by the releases includes about 28 miles along the channel from the mouth of the Agua Fria River to the Beardsley Canal flume crossing 5 miles downstream from Waddell Dam. The flood of 1980 into Lake Pleasant has a recurrence interval of about 47 years, whereas the flood of record (1919) has a recurrence interval of about 100 years. (USGS)

  7. SEISMIC STUDY OF THE AGUA DE PAU GEOTHERMAL PROSPECT, SAO MIGUEL, AZORES.

    USGS Publications Warehouse

    Dawson, Phillip B.; Rodrigues da Silva, Antonio; Iyer, H.M.; Evans, John R.

    1985-01-01

    A 16 station array was operated over the 200 km**2 central portion of Sao Miguel utilizing 8 permanent Instituto Nacional de Meterologia e Geofisica stations and 8 USGS portable stations. Forty four local events with well constrained solutions and 15 regional events were located. In addition, hundreds of unlocatable seismic events were recorded. The most interesting seismic activity occurred in a swarm on September 6 and 7, 1983 when over 200 events were recorded in a 16 hour period. The seismic activity around Agua de Pau was centered on the east and northeast slopes of the volcano. The data suggest a boiling hydrothermal system beneath the Agua de Pau volcano, consistent with a variety of other data.

  8. Agua Caliente Solar Feasibility and Pre-Development Study Final Report

    SciTech Connect

    Carolyn T. Stewart, Managing Partner; Red Mountain Energy Partners

    2011-04-26

    Evaluation of facility- and commercial-scale solar energy projects on the Agua Caliente Band of Cahuilla Indians Reservation in Palm Springs, CA. The Agua Caliente Band of Cahuilla Indians (ACBCI) conducted a feasibility and pre-development study of potential solar projects on its lands in southern California. As described below, this study as a logical and necessary next step for ACBCI. Support for solar project development in California, provided through the statewide California Solar Initiative (CSI), its Renewable Portfolio Standard and Feed-in Tariff Program, and recently announced Reverse Auction Mechanism, provide unprecedented support and incentives that can be utilized by customers of California's investor-owned utilities. Department of Energy (DOE) Tribal Energy Program funding allowed ACBCI to complete its next logical step to implement its Strategic Energy Plan, consistent with its energy and sustainability goals.

  9. Hydrologic characteristics of the Agua Fria National Monument, central Arizona, determined from the reconnaissance study

    USGS Publications Warehouse

    Fleming, John B.

    2005-01-01

    Hydrologic conditions in the newly created Agua Fria National Monument were characterized on the basis of existing hydrologic and geologic information, and streamflow data collected in May 2002. The study results are intended to support the Bureau of Land Management's future water-resource management responsibilities, including quantification of a Federal reserved water right within the monument. This report presents the study results, identifies data deficiencies, and describes specific approaches for consideration in future studies. Within the Agua Fria National Monument, the Agua Fria River flows generally from north to south, traversing almost the entire 23-mile length of the monument. Streamflow has been measured continuously at a site near the northern boundary of the monument since 1940. Streamflow statistics for this site, and streamflow measurements from other sites along the Agua Fria River, indicate that the river is perennial in the northern part of the monument but generally is intermittent in downstream reaches. The principal controls on streamflow along the river within the monument appear to be geology, the occurrence and distribution of alluvium, inflow at the northern boundary and from tributary canyons, precipitation, and evapotranspiration. At present, (2004) there is no consistent surface-water quality monitoring program being implemented for the monument. Ground-water recharge within the monument likely results from surface-water losses and direct infiltration of precipitation. Wells are most numerous in the Cordes Junction and Black Canyon City areas. Only eight wells are within the monument. Ground-water quality data for wells in the monument area consist of specific-conductance values and fluoride concentrations. During the study, ground-water quality data were available for only one well within the monument. No ground-water monitoring program is currently in place for the monument or surrounding areas.

  10. Geochemical Redox Indices and microfacies of the Cenomanian-Turonian Agua Nueva/Eagle Ford Fm, Mexico, Evidence for Anoxia Related to OAE2

    NASA Astrophysics Data System (ADS)

    Maurrasse, F. J.; Sanchez-hernandez, Y.; Blanco, A.

    2013-05-01

    Widespread occurrence of black, C-organic-rich sediments within the time of the Cenomanian/Turonian boundary attests to the occurrence of a major global event affecting the carbon cycle coined OAE 2. Intense carbon sequestration in sediments associated with the development of anoxic waters in the deep-ocean and epicontinental seas also led to enhanced export of trace elements as organo-metallic compounds, hence their subsequent enrichment in oxygen-deficient to anoxic sediments. In some areas, stratification of the water column coupled with controlling local factors affected microbial productivity leading to TOC-enriched sediments developed under suboxic/anoxic conditions, in others microbial communities led to high TOC values. We integrate geochemical redox indicators and microfacies characterization to assess oxygenic conditions in the Cenomanian-Turonian C-org-rich deposit of the Agua Nueva Formation and the coeval Eagle Ford Fm/ Boquillas Fm. We studied laminated samples of the Agua Nueva from Xilitla, San Luis Potosi State; San Eugenio (type locality of the Formation), Tamaulipas State; and the Eagle Ford at Quarry Los Temporales, northern Coahuila State). Microfacies at all localities reveal the prevalence of coccoid cyanobacteria, some filamentous morphotypes and degraded shell fragments, as the primary components, regardless of TOC values. Planktonic foraminifera constitute 15 to 20 % of the microfossils reaching highest abundance at Los Temporales, including macro-organisms (crustaceans). Absence of benthic foraminifera, and parallel alignment of all components attest to the absence of bioturbation, thus oxygen-deficient bottom waters. Eagle Ford samples are low in TOC, whereas the Agua Nueva samples are enriched in OM as brown amorphous macerals with bacterial coccospheres in lamination attributed to sustained microbial blooms. TE concentrations (V, Ni, U) and redox indices (V/(V+Ni), Ni/Co, V/Cr and U/Th) from the three localities confirm that these

  11. Use of Archival Sources to Improve Water-Related Hazard Assessments at Volcán de Agua, Guatemala

    NASA Astrophysics Data System (ADS)

    Hutchison, A. A.; Cashman, K. V.; Rust, A.; Williams, C. A.

    2013-12-01

    This interdisciplinary study focuses on the use of archival sources from the 18th Century Spanish Empire to develop a greater understanding of mudflow trigger mechanisms at Volcán de Agua in Guatemala. Currently, hazard assessments of debris flows at Volcán de Agua are largely based on studies of analogous events, such as the mudflow at Casita Volcano in 1998 caused by excessive rainfall generated by Hurricane Mitch. A preliminary investigation of Spanish archival sources, however, indicates that a damaging mudflow from the volcano in 1717 may have been triggered by activity at the neighbouring Volcán de Fuego. A VEI 4 eruption of Fuego in late August 1717 was followed by 33 days of localized 'retumbos' and then a major local earthquake with accompanying mudflows from several 'bocas' on the southwest flank of Agua. Of particular importance for this study is an archival source from Archivos Generales de Centro América (AGCA) that consists of a series of letters, petitions and witness statements that were written and gathered following the catastrophic events of 1717. Their purpose was to argue for royal permission to relocate the capital city, which at the time was located on the lower flanks of Volcán de Agua. Within these documents there are accounts of steaming 'avenidas' of water with sulphurous smells, and quantitative descriptions that suggest fissure formation related to volcanic activity at Volcán de Fuego. Clear evidence for volcano-tectonic activity at the time, combined with the fact there is no mention of rainfall in the documents, suggest that outbursts of mud from Agua's south flank may have been caused by a volcanic perturbation of a hydrothermal system. This single example suggests that further analysis of archival documents will provide a more accurate and robust assessment of water related hazards at Volcán de Agua than currently exists.

  12. The Laramide Mesa formation and the Ojo de Agua caldera, southeast of the Cananea copper mining district, Sonora, Mexico

    USGS Publications Warehouse

    Cox, Dennis P.; Miller, Robert J.; Woodbourne, Keith L.

    2006-01-01

    The Mesa Formation extends from Cananea, Mexico, southeast to the Sonora River and is the main host rock of Laramide porphyry copper deposits in the Cananea District and at the Alacran porphyry prospect to the east. The Mesa consists of two members-a lower andesite and an upper dacite. The lowest part of the dacite member is a crystal tuff about 100 m thick. This tuff is the outfall of a caldera centered near the village of Ojo de Agua, dated by 40Ar/39Ar at 65.8 Ma ?0.4. The Ojo de Agua Caldera is about 9 km in diameter and is filled by a light gray biotite dacite tuff with abundant flattened pumice fragments. The volume of the caldera is estimated to be 24 km3.

  13. New geologic slip rates for the Agua Blanca Fault, northern Baja California, Mexico

    NASA Astrophysics Data System (ADS)

    Gold, P. O.; Behr, W. M.; Fletcher, J. M.; Hinojosa-Corona, A.; Rockwell, T. K.

    2015-12-01

    Within the southern San Andreas transform plate boundary system, relatively little is known regarding active faulting in northern Baja California, Mexico, or offshore along the Inner Continental Borderland. The inner offshore system appears to be fed from the south by the Agua Blanca Fault (ABF), which strikes northwest across the Peninsular Ranges of northern Baja California. Therefore, the geologic slip rate for the ABF also provides a minimum slip rate estimate for the offshore system, which is connected to the north to faults in the Los Angeles region. Previous studies along the ABF determined slip rates of ~4-6 mm/yr (~10% of relative plate motion). However, these rates relied on imprecise age estimates and offset geomorphic features of a type that require these rates to be interpreted as minima, allowing for the possibility that the slip rate for the ABF may be greater. Although seismically quiescent, the surface trace of the ABF clearly reflects Holocene activity, and given its connectivity with the offshore fault system, more quantitative slip rates for the ABF are needed to better understand earthquake hazard for both US and Mexican coastal populations. Using newly acquired airborne LiDAR, we have mapped primary and secondary fault strands along the segmented western 70 km of the ABF. Minimal development has left the geomorphic record of surface slip remarkably well preserved, and we have identified abundant evidence meter to km scale right-lateral displacement, including new Late Quaternary slip rate sites. We verified potential reconstructions at each site during summer 2015 fieldwork, and selected an initial group of three high potential slip rate sites for detailed mapping and geochronologic analyses. Offset landforms, including fluvial terrace risers, alluvial fans, and incised channel fill deposits, record displacements of ~5-80 m, and based on minimal soil development, none appear older than early Holocene. To quantitatively constrain landform ages

  14. Thermal Fluid and Fault Interactions at the Intersection of Two Faults, Agua Caliente, California

    NASA Astrophysics Data System (ADS)

    Wood, R. E.; Evans, J. P.

    2011-12-01

    Agua Caliente Springs lies at a unique intersection between the NNW-trending Elsinore fault and the 40° northeast-dipping, likely inactive West Salton detachment fault; it provides an opportunity to study damage zone geometry, fault behavior in crystalline rocks, a left-stepover zone between the Julian and Coyote segments, microseismicity, and the influence of thermal fluids on rock deformation. The Elsinore fault bounds the northwestern flank of the Tierra Blanca Mountains with strike-slip and normal motion; the detachment fault wraps around the northernmost portion of the mountains. Damage along the Elsinore ranges in thickness from a narrow slip plane to > 100 m along the eastern flank of the Tierra Blanca Mountains. Subsidiary faults trend northeast and southeast, and slip orientations vary from normal to strike-slip horizontal motion. Thermal fluids (~30°C) emerge at the intersection of the West Salton detachment and Elsinore faults actively alter the 94 Ma La Posta tonalite pluton, already fractured and crushed during fault slip, to a fine-grained white to orange powder through mineral re-equilibration. Grain sizes decrease with closer proximity to the faults. Fault cores contain thin dark green zones of chlorite ± epidote, and fault surfaces are coated with a thin layer of the same. Origin of the mineralization may be from reworked biotite crystals. We present water chemistry data from the hot springs at Agua Caliente in conjunction with geochemical and petrographic analysis of the surrounding rock. Water analyses include cation and anion measurements, bicarbonate, stable isotopes, tritium, and a multi-month recording of spring conductivity, water level, and temperature fluctuations. Cation geothermometry shows the fluids are enriched in Na, Ca, Mg, K, and Si from broken down quartz, plagioclase, and orthoclase. Water level and temperature data are compared to seismicity during the logging interval; temperatures so far have diurnal fluctuations indicating

  15. Assessment of paleo-oxygenation conditions on the Agua Nueva Formation (Cenomanian-Turonian), Central Mexico

    NASA Astrophysics Data System (ADS)

    Nuñez, F.; Canet, C.; Barragan-Manzo, R.; Alfonso, P.

    2013-05-01

    Organic-carbon-rich, laminated sediments are characteristic and widespread in the global stratigraphic record of the mid-Cretaceous, mainly during the Oceanic Anoxic Events (OAE's). In central-eastern Mexico, deposits of the Agua Nueva Formation are constituted by dark-gray, carbonaceous and laminated limestone with pyritic layers related to the Cenomanian-Turonian OAE 2. Herein, through different proxies, variations of paleo-redox conditions are studied in detail on a stratigraphic section of the Agua Nueva Formation. A first approach to redox conditions comes from the analysis of the stratigraphic record. Laminated fabrics and the paucity of bioturbation are typical features of a poorly oxygenated sedimentary environment. The presence of well-preserved fish remains and inoceramid bivalve shells is also consistent with those conditions. On the other hand, discrete light-colored and bioturbated thin levels indicate limited increases in the dissolved oxygen content. Geochemical proxies include δ13C in carbonates, δ34S in pyrite and the concentration of various redox-sensitive trace-elements. δ13C (VPDB) ranges from 0.39‰ to 1.30‰, whereas δ34Spy (VCDT) is between -41.23‰ and -11.27‰. The stratigraphic variation patterns of both isotopic values (δ13C and δ34S) are roughly opposite, reflecting changes in the burial of organic matter (OM) and, consequently, in the rate of bacterial sulphate reduction. Thus, positive 13C-rich carbonates represent lower free oxygen condition which enhanced burial flux of OM, tend to shift δ13C of carbonates toward positive values and triggered the incorporation of 32S into the sulfide by bacteria. This situation is also suggested by an enrichment of the sediments in V, Ni, Cr, Cu, Co, Zn, Mo and U. The abundance and size distribution of pyrite framboids proved to be in good agreement with the geochemical results. They also suggest dysoxic to anoxic conditions for the stratigraphic section studied. Both parameters have been

  16. Relaciones hidrogeologicas y medioambientales entre el mar mediterraneo, El saladar y el acuifero de agua amarga (provincia de alicante). Incidencia de las explotaciones de las desaladoras de alicante I Y II Y medidas correctoras

    NASA Astrophysics Data System (ADS)

    Manteca, Ivan Alhama

    The Agua Amarga coastal aquifer, located in the south of Alicante province, has been subjected to successive anthropogenic actions: salt works activity (1925-1975) and water withdrawal to supply the Alicante I and II desalination plants (since 2003). These interventions have influenced the salinity and the flow regime. Due to the existence of a salt marsh of ecological interest linked to the aquifer, the 'Mancomunidad de los Canales del Taibilla' (agency responsible for the desalination plants) designed a piezometric network for monitoring piezometry and electrical conductivity (in operation since May 2008). Soil humidity and piezometrics levels have been recovered by means of a seawater pouring programme over the salt marsh (since December 2009),which represents the third anthropic intervention. In this memoria, we investigate the Agua Amarga coastal aquifer to develop a physical conceptual model. Firstly, the study area is characterized in relation to climatology, geology, geomorphology and hydrogeology, using published information, describing, in addition, the desalination plants catchment system. Next, based on hydrogeological studies prior to the start up of the desalination plants, the aquifer is characterized: type, lithology, hydraulic parameters, thickness, surface extension, etc. Water quantity relating to rainfall, water withdrawal and pourings over the salt marsh, have been integrated in conjunction with data from monthly piezometric campaigns. In adittion, in order to gain insight into the groundwater mixing processes, chemical and isotope analyses were carried out on meteoric water and groundwater samples taken at different locations. The results were used to elaborate a conceptual physical model and a water budget. As an extension tool to understand processes and assess aquifer management, a 3-D fluid-flow and solute-transport model is designed with SEAWAT. Also, the 2-D physical characterization of scenarios with seawater intrusion and salt flats is

  17. Use of renewable sources of energy in Mexico case: San Antonio Agua Bendita

    SciTech Connect

    Gutierrez-Vera, J. )

    1994-09-01

    This paper presents a project undertaken in Mexico to electrify the remote village of San Antonio Agua Bendita (SAAB) using a custom designed hybrid power system. The hybrid power system will provide grid quality electricity to this community which would otherwise not have been electrified via traditional distribution lines. The hybrid power system was designed to electrify the entire community, incorporate multiple sources of renewable power with on-demand power, operate autonomously, and be cost effective in dollars per watt of electricity generated over the system's usable life. A major factor in the success of this project is the use of renewable energy for economic development and community partnership. Many rural electrification projects have provided power for domestic use but few have successfully provided power to improve the economic condition of the people served by the system. The SAAB hybrid avoids this pitfall by providing 120 VAC power at 60 Hz to anticipated industrial loads in the village, as well as providing grid quality power for domestic use.

  18. Preliminary Image Map of the 2007 Buckweed Fire Perimeter, Agua Dulce Quadrangle, Los Angeles County, California

    USGS Publications Warehouse

    Clark, Perry S.; Scratch, Wendy S.; Bias, Gaylord W.; Stander, Gregory B.; Sexton, Jenne L.; Krawczak, Bridgette J.

    2008-01-01

    In the fall of 2007, wildfires burned out of control in southern California. The extent of these fires encompassed large geographic areas that included a variety of landscapes from urban to wilderness. The U.S. Geological Survey National Geospatial Technical Operations Center (NGTOC) is currently (2008) developing a quadrangle-based 1:24,000-scale image map product. One of the concepts behind the image map product is to provide an updated map in electronic format to assist with emergency response. This image map is one of 55 preliminary image map quadrangles covering the areas burned by the southern California wildfires. Each map is a layered, geo-registered Portable Document Format (.pdf) file. For more information about the layered geo-registered .pdf, see the readme file (http://pubs.usgs.gov/of/2008/1029/downloads/CA_Agua_Dulce_of2008-1029_README.txt). To view the areas affected and the quadrangles mapped in this preliminary project, see the map index (http://pubs.usgs.gov/of/2008/1029/downloads/CA_of2008_1029-1083_index.pdf) provided with this report.

  19. Introduccion a la hidraulica de aguas subterraneas : un texto programado para auto-ensenanza

    USGS Publications Warehouse

    Bennett, Gordon D.

    1987-01-01

    Este ' texto programado esta diseflado para ayudarle a comprender la teoria de la hidniulica de aguas subterraneas por medio de la auto-enseflanza. La instrucci6n programada es un enfoque a una materia, un metodo de aprender;que no elimina el esfuerzo mental del proceso de aprendizaje. Algunas secciones de este programa necesitan solamente ser leidas; otras tendrian que ser elaboradas con lapiz y papel. Algunas preguntas pueden ser contestadas directamente; otras requieren calculos. A medida que se avanza en el texto, tendra que consultar frecuentemente textos o referencias sobre matematicas, mecanica de fluidos e hidrologia. En cada una de las ocho partes del texto, inicie el programa de instrucci6n leyendo la Secci6n 1. Elija una respuesta a la pregunta al final de la secci6n y dirijase a la nueva secci6n indicada al lado de la respuesta escogida. Si su respuesta fue correcta, pase a la secci6n que contiene materia nueva y otra pregunta, y proceda tal como en la Secci6n 1. Si su respuesta no fue correcta, dirijase a la secci6n que contiene explicaciones adicionales sobre el tema anterior y que le indica volver a la pregunta inicial e intentar de nuevo. En este caso, valdra Ia pena repasar el material de la secci6n anterior. Continue de esta man era en el programa hasta que llegue a Ia secci6n que indica el final de la parte. Observe que aunque las secciones estan en orden numerico en cada una de las ocho partes, por lo general, usted no procedeni en secuencia numerica (Secci6n 1 ala Secci6n 2, etc.) de principia a fin.

  20. Basic diagnosis of solid waste generated at Agua Blanca State Park to propose waste management strategies.

    PubMed

    Laines Canepa, José Ramón; Zequeira Larios, Carolina; Valadez Treviño, Maria Elena Macías; Garduza Sánchez, Diana Ivett

    2012-03-01

    State parks are highly sensitive areas of great natural importance and tourism value. Herein a case study involving a basic survey of solid waste which was carried out in 2006 in Agua Blanca State Park, Macuspana, Tabasco, Mexico with two sampling periods representing the high and low tourist season is presented. The survey had five objectives: to find out the number of visitors in the different seasons, to consider the daily generation of solid waste from tourist activities, to determine bulk density, to select and quantify sub-products; and to suggest a possible treatment. A daily average of 368 people visited the park: 18,862 people in 14 days during the high season holiday (in just one day, Easter Sunday, up to 4425 visitors) and 2092 visitors in 43 days during the low season. The average weight of the generated solid waste was 61.267 kg day(-1) and the generated solid waste average per person was 0.155 kg person(-1 ) day(-1). During the high season, the average increased to 0.188 kg person(-1 ) day(-1) and during the low season, the average decreased to 0.144 kg person(-1 ) day(-1). The bulk density average was 75.014 kg m(-3), the maximum value was 92.472 kg m(-3) and the minimum was 68.274 kg m(-3). The sub-products comprised 54.52% inorganic matter; 32.03% organic matter, 10.60% non-recyclable and 2.85% others. Based on these results, waste management strategies such as reuse/recycling, aerobic and anaerobic digestion, the construction of a manual landfill and the employment of a specialist firm were suggested.

  1. Investigating microbial diversity and UV radiation impact at the high-altitude Lake Aguas Calientes, Chile

    NASA Astrophysics Data System (ADS)

    Escudero, Lorena; Chong, Guillermo; Demergasso, Cecilia; Farías, María Eugenia; Cabrol, Nathalie A.; Grin, Edmond; Minkley, Edwin, Jr.; Yu, Yeoungeob

    2007-09-01

    The High-Lakes Project is funded by the NAI and explores the highest perennial volcanic lakes on Earth in the Bolivian and Chilean Andes, including several lakes ~6,000 m elevation. These lakes represent an opportunity to study the evolution of microbial organisms in relatively shallow waters not providing substantial protection against UV radiation. Aguas Calientes (5,870 m) was investigated (November 2006) and samples of water and sediment collected at 1, 3, 5, and 10 cm depth. An Eldonet UV dosimeter positioned on the shore records UV radiation and temperature, and is logging data year round. A UV SolarLight sensor allowed acquisition of point measurements in all channels at the time of the sampling. UVA, UVB, and PAR peaks between 11:00 am and 1:00 pm reached 7.7 mW/cm2, 48.5 μW/cm2, and 511 W/m2, respectively. The chemical composition of the water sample was analyzed. DNA was extracted and DGGE analyses with bacterial and archaeal 16S fragments were performed to describe microbial diversity. Antibiotic resistances were established previously in similar environments in Argentine Andean wetlands. In order to determine these resistances in our samples, they were inoculated onto LB and R2A media and onto R2A medium containing either chloramphenicol, ampicillin or tetracycline. Bacterial was higher than archeal cell number determined by RT-PCR in all the samples, reaching maximum total values of 5x10 5 cell mL-1. DGGE results from these samples and Licancabur summit lake (5,916 m) samples were also compared. Eight antibiotic-resistant Gram negative strains have been isolated with distinct resistance patterns.

  2. Integrated Means Integrity

    ERIC Educational Resources Information Center

    Odegard, John D.

    1978-01-01

    Describes the operation of the Cessna Pilot Center (CPC) flight training systems. The program is based on a series of integrated activities involving stimulus, response, reinforcement and association components. Results show that the program can significantly reduce in-flight training time. (CP)

  3. Integrating Art.

    ERIC Educational Resources Information Center

    BCATA Journal for Art Teachers, 1991

    1991-01-01

    These articles focus on art as a component of interdisciplinary integration. (1) "Integrated Curriculum and the Visual Arts" (Anna Kindler) considers various aspects of integration and implications for art education. (2) "Integration: The New Literacy" (Tim Varro) illustrates how the use of technology can facilitate cross-curricular integration.…

  4. Amino acid epimerization dating of Quaternary coastal deformation in SE Iberian Peninsula: The region between Aguas and Antas Rivers' mouths

    NASA Astrophysics Data System (ADS)

    Torres, Trinidad; Ortiz, José E.; Sánchez-Palencia, Yolanda

    2016-05-01

    The coastal area between the mouths of the Aguas and Antas Rivers presents a deformed system of raised marine deposits, some of which have been strongly affected by active tectonics. The use of amino acid epimerization dating of Glycymeris shells from raised coastal deposits allowed determining the age of these marine deposits, all of them linked to highstand sea levels in the Mediterranean realm, with ages between MIS 11 and MIS 1. These results allowed corroborating the age of some previously studied sites, and using new sampling sites, the general aminostratigraphy for the Quaternary raised marine deposits on the Mediterranean coast was confirmed. The main deformation event took place after MIS 11 and continued until MIS 5, and was linked to the activity of the Palomares Fault.

  5. Reservoir heterogeneity in the middle Frio Formation: Case studies in Stratton and Agua Dulce fields, Nueces County, Texas

    SciTech Connect

    Kerr, D.R. )

    1990-09-01

    Selected middle Frio (Oligocene) reservoirs of Stratton field and the contiguous Agua Dulce field are being studied as part of a Gas Research Institute/Department of Energy/State of Texas cosponsored program designed to improve reserve growth in mature gas fields. Over the past four decades, Stratton has produced 2.0 tcf of gas from 113 middle Frio reservoirs, and Agua Dulce has produced 1.6 tcf from 116 reservoirs. Recent drilling and workover activities, however, suggest the presence of additional untapped or bypassed middle Frio reservoirs. Four reservoirs, the E18/6,020-ft, E21/6,050-ft, E31/6,100-ft, and E41/Bertram, were evaluated over a 13,000-acre tract that includes areas adjacent to both fields. The middle Frio is composed of sand-rich channel-fill and splay deposits interstratified with floodplain mudstones, all forming part of the Gueydan fluvial system. Channel-fill deposits are 30 ({plus minus}15) ft thick and 2,500 ({plus minus}500) ft wide. Splay deposits are up to 30 ft thick proximal to channels and extend as much as 2 mi from channels. Channel-fill and associated splay sandstones are reservoir facies (porosity 20%; permeability = 10s to 100s md); floodplain mudstones and levee sandy mudstones are barriers to flow facies separating individual reservoirs vertically and laterally. The E41/Bertram reservoir is an example of a laterally stacked channel system deposited during relatively slow aggradation. This reservoir includes sand-on-sand contacts and is composed of mostly leaky compartments. The E 18/6,020-ft, E21/6,050-ft, and E31/6,100ft reservoirs are examples of vertically stacked channel systems reflecting higher rates of aggradation. Vertically stacked architectures are more favorable for isolated compartments and therefore are better candidates for infield reserve growth.

  6. Prevalence and Correlates of ‘Agua Celeste’ Use among Female Sex Workers who Inject Drugs in Ciudad Juarez, Mexico

    PubMed Central

    Morris, Meghan D.; Case, Patricia; Robertson, Angela M.; Lozada, Remedios; Vera, Alicia; Clapp, John D.; Medina-Mora, Maria Elena; Strathdee, Steffanie A.

    2011-01-01

    Background Agua celeste, or “heavenly water,” is the street name for a sky-blue colored solvent reportedly inhaled or ingested to produce an intoxicating effect. Study aims were to (1) describe prevalence of Agua Celestse (AC) use, and (2) identify correlates of lifetime and recent use of AC use among female sex workers who also inject drugs (FSW-IDUs) in northern Mexico. Methods Between 2008 and 2010, baseline data from FSW-IDUs ≥ 18 years old living in Tijuana or Ciudad Juarez participating in a longitudinal behavioral intervention were analyzed using logistic regression. Results Among 623 FSW-IDUs (307 from Tijuana and 316 from Ciudad Juarez (CJ)), 166 (26%) reported ever using AC, all of whom lived in CJ. Among the CJ sample, lifetime prevalence of AC use was 53%, median age of first use was 16 years (IQR: 14–23), and 10% reported it as their first abused substance. Ever using AC was independently associated with ever being physically abused and younger age, and was marginally associated with initiating injection drug use and regular sex work at age eighteen or younger. Among those ever using AC, 70/166 (42.2%) reported using it within the last 6 months, which was independently associated with using drugs with clients before or during sex, being on the street more than 8 hours per day, and younger age. Discussion We observed considerable geographic variation in the use of AC in northern Mexico. Future studies exploring factors influencing use, its precise formulation(s), and its potential health effects are needed to guide prevention and treatment. PMID:21441001

  7. The Cerro Aguas Calientes caldera, NW Argentina: An example of a tectonically controlled, polygenetic collapse caldera, and its regional significance

    NASA Astrophysics Data System (ADS)

    Petrinovic, I. A.; Martí, J.; Aguirre-Díaz, G. J.; Guzmán, S.; Geyer, A.; Paz, N. Salado

    2010-07-01

    Polygenetic, silicic collapse calderas are common in the central Andes. Here we describe in detail the Cerro Aguas Calientes caldera in NW Argentina, which comprises two caldera-forming episodes that occurred at 17.15 Ma and 10.3 Ma. We analyse the significance of its structural setting, composition, size and the subsidence style of both caldera episodes. We find that the caldera eruptions had a tectonic trigger. In both cases, an homogeneous dacitic crystal-rich (>60 vol.% of crystals) reservoir of batholithic size became unstable due to the effect of increasing regional transpression, which favoured local dilation through minor strike-slip faults from which ring faults nucleated and permitted caldera collapse. Both calderas are similar in shape, location and products. The 17.15 Ma caldera has an elliptical shape (17 × 14 km) elongated in a N30° trend; both intracaldera and extracaldera ignimbrites covered an area of around 620 km 2 with a minimum volume estimate of 140 km 3 (DRE). The 10.3 Ma episode generated another elliptical caldera (19 × 14 km), with the same orientation as the previous one, from which intracaldera and outflow ignimbrites covered a total area of about 1700 km 2, representing a minimum eruption volume of 350 km 3(DRE). In this paper we discuss the significance of the Cerro Aguas Calientes caldera in comparison with other well known examples from the central Andes in terms of tectonic setting, eruption mechanisms, and volumes of related ignimbrites. We suggest that our kinematic model is a common volcano-tectonic scenario during the Cenozoic in the Puna and Altiplano, which may be applied to explain the origin of other large calderas in the same region.

  8. The Cerro Aguas Calientes caldera, NW Argentina: an example of a tectonically controlled, polygenetic, collapse caldera, and its regional significance

    NASA Astrophysics Data System (ADS)

    Petrinovic, Ivan A.; Martí, Joan; Aguirre-Diaz, Gerardo J.; Guzmán, Silvina R.; Geyer, Adelina; Grosse, Pablo; Salado Paz, Natalia

    2010-05-01

    Polygenetic, silicic collapse calderas such as Cerro Galán, Pastos Grandes, La Pacana, Vilama, Negra Muerta, Farallón Negro, Cerro Guacha, among others are common in the central Andes. Here we describe in detail the Cerro Aguas Calientes caldera in NW Argentina, which comprises two caldera-forming episodes occurred at 17.15 Ma and 10.3 Ma, respectively. We analyse the significance of its structural setting, composition, size and the subsidence style of both caldera episodes. Our results reveal that the caldera eruptions had a tectonic trigger. In both cases, an homogeneous dacitic crystal-rich (>60 vol. % of crystals) reservoir of batholitic size became unstable due to the effect of increasing regional transpression, favouring local dilation throughout minor strike slip faults from which ring faults nucleated and permitted caldera collapse. Both episodes are similar in shape, location and products of the resulting calderas. The 17.15 Ma caldera has an elliptical shape (17 × 14 km) and is elongated in a N30° trend; both intracaldera and extracaldera ignimbrites covered an area of around 620 km2 with a minimum volume estimate of 138 km3 (DRE). The 10.3 Ma episode generated another elliptical caldera (19 ×14 km), with the same orientation as the previous one, from which intracaldera and outflow ignimbrites covered a total area of about 1,700 km2, representing a minimum eruption volume of 341 km3 (DRE). In this work we discuss the significance of the Cerro Aguas Calientes caldera in comparison with other well known examples from the central Andes in terms of tectonic setting, eruption mechanisms, and volumes of related ignimbrites. We suggest that our kinematic model is a common volcano-tectonic scenario during the Cenozoic in the Puna and Altiplano, which may be applied to explain the origin of other large calderas in the same region.

  9. aguA, the gene encoding an extracellular alpha-glucuronidase from Aspergillus tubingensis, is specifically induced on xylose and not on glucuronic acid.

    PubMed

    de Vries, R P; Poulsen, C H; Madrid, S; Visser, J

    1998-01-01

    An extracellular alpha-glucuronidase was purified and characterized from a commercial Aspergillus preparation and from culture filtrate of Aspergillus tubingensis. The enzyme has a molecular mass of 107 kDa as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and 112 kDa as determined by mass spectrometry, has a determined pI just below 5.2, and is stable at pH 6.0 for prolonged times. The pH optimum for the enzyme is between 4.5 and 6.0, and the temperature optimum is 70 degrees C. The alpha-glucuronidase is active mainly on small substituted xylo-oligomers but is also able to release a small amount of 4-O-methylglucuronic acid from birchwood xylan. The enzyme acts synergistically with endoxylanases and beta-xylosidase in the hydrolysis of xylan. The enzyme is N glycosylated and contains 14 putative N-glycosylation sites. The gene encoding this alpha-glucuronidase (aguA) was cloned from A. tubingensis. It consists of an open reading frame of 2,523 bp and contains no introns. The gene codes for a protein of 841 amino acids, containing a eukaryotic signal sequence of 20 amino acids. The mature protein has a predicted molecular mass of 91,790 Da and a calculated pI of 5.13. Multiple copies of the gene were introduced in A. tubingensis, and expression was studied in a highly overproducing transformant. The aguA gene was expressed on xylose, xylobiose, and xylan, similarly to genes encoding endoxylanases, suggesting a coordinate regulation of expression of xylanases and alpha-glucuronidase. Glucuronic acid did not induce the expression of aguA and also did not modulate the expression on xylose. Addition of glucose prevented expression of aguA on xylan but only reduced the expression on xylose.

  10. Vigilando la Calidad del Agua de los Grandes Rios de la Nacion: El Programa NASQAN del Rio Grande (Rio Bravo del Norte)

    USGS Publications Warehouse

    Lurry, Dee L.; Reutter, David C.; Wells, Frank C.; Rivera, M.C.; Munoz, A.

    1998-01-01

    La Oficina del Estudio Geologico de los Estados Unidos (U.S. Geological Survey, 0 USGS) ha monitoreado la calidad del agua de la cuenca del Rio Grande (Rio Bravo del Norte) desde 1995 como parte de la rediseiiada Red Nacional para Contabilizar la Calidad del Agua de los Rios (National Stream Quality Accounting Network, o NASOAN) (Hooper and others, 1997). EI programa NASOAN fue diseiiado para caracterizar las concentraciones y el transporte de sedimento y constituyentes quimicos seleccionados, encontrados en los grandes rios de los Estados Unidos - incluyendo el Misisipi, el Colorado y el Columbia, ademas del Rio Grande. En estas cuatro cuencas, el USGS opera actualmente (1998) una red de 40 puntos de muestreo pertenecientes a NASOAN, con un enfasis en cuantificar el flujo en masa (la cantidad de material que pasa por la estacion, expresado en toneladas por dial para cada constituyente. Aplicacando un enfoque consistente, basado en la cuantificacion de flujos en la cuenca del Rio Grande, el programa NASOAN esta generando la informacion necesaria para identificar fuentes regionales de diversos contaminantes, incluyendo sustancias qui micas agricolas y trazas elementos en la cuenca. EI efecto de las grandes reservas en el Rio Grande se puede observar segun los flujos de constituyentes discurren a 10 largo del rio. EI analisis de los flujos de constituyentes a escala de la cuenca proveera los medios para evaluar la influencia de la actividad humana sobre las condiciones de calidad del agua del Rio Grande.

  11. Teaching Integrity

    ERIC Educational Resources Information Center

    Saunders, Sue; Butts, Jennifer Lease

    2011-01-01

    Integrity is one of those essential yet highly ambiguous concepts. For the purpose of this chapter, integrity is defined as that combination of both attributes and actions that makes entities appear to be whole and ethical, as well as consistent. Like the concepts of leadership or wisdom or community or collaboration, integrity is a key element of…

  12. Integrated Learning

    ERIC Educational Resources Information Center

    Gnanakan, Ken

    2012-01-01

    This book upholds the idea of learning and education as a means to individual development and social empowerment. It presents a holistic picture, looking at learning as an integral part of one's social and physical life. Strongly differing from existing classroom perspectives, the book analyses integrated learning at its broadest possible…

  13. Integrated Science.

    ERIC Educational Resources Information Center

    Rainey, Larry; Miller, Roxanne Greitz

    1997-01-01

    Describes the Integrated Science program that integrates biology, earth/space science, chemistry, and physics over a three-year, spiraling sequence arranged around broad themes such as cycles, changes, patterns, and waves. Includes weekly telecasts via public television and satellite, teacher manuals, student handbooks, e-mail connections, staff…

  14. Integrative Education.

    ERIC Educational Resources Information Center

    Walker, Dean

    1995-01-01

    In contrast with subject-bound education, integrative education promotes the construction of broad "mental programs" that require students to use skills and information in new, realistic contexts. Early childhood education has long been a model of integrative education, emphasizing the whole child and offering a wide range of experiences that…

  15. An Eco-hydrologic Assessment of Small Experimental Catchments with Various Land Uses within the Panama Canal Watershed: Agua Salud Project

    NASA Astrophysics Data System (ADS)

    Crouch, T. D.; Ogden, F. L.; Stallard, R. F.; Smithsonian Tropical Research Institute, Panama Canal Watershed Experiment, Agua Salud Project

    2010-12-01

    Hydrological processes in the humid tropics are poorly understood and an important topic when it comes to water management in the seasonal tropics. The Smithsonian Tropical Research Institute, Panama Canal Watershed Experiment, Agua Salud Project, seeks to understand these processes and quantify the long-term effects of different land cover and uses across the Panama Canal Watershed. One of the project’s main objectives is to understand how reforestation effects seasonal stream flows. To meet this objective, a baseline characterization of hydrology on the small catchment scale is being assessed across different land uses typical in rural Panama. The small experimental catchments are found within Panama’s protected Soberania National Park and the adjacent headwaters of the Agua Salud and Mendoza Rivers, all of which are part of the greater Panama Canal Watershed. The land uses being monitored include a variety of control catchments as well as treated pasture sites. The catchments used for this study include a mature old regrowth forest, a 50% deforested or mosaic regrowth site, an active pasture and a monoculture invasive grass site (saccharum spontaneum) as experimental controls and two treated catchments that were recently abandoned pastures converted to teak and native species timber plantations. Installed instrumentation includes a network of rain gauges, v-notched weirs, atmometers, an eddy covariance system and an assortment of meteorological and automated geochemical sampling systems. Spatial, rainfall, runoff and ET data across these six geologically and topographically similar catchments are available from 2009 and 2010. Classic water balance and paired catchment techniques were used to compare the catchments on an annual, seasonal, and event basis. This study sets the stage for hydrologic modeling and for better understanding the effects of vegetation and land-use history on rainfall-runoff processes for the Agua Salud Project and Panama Canal

  16. Integrated care

    PubMed Central

    Gröne, Oliver; Garcia-Barbero, Mila

    2001-01-01

    Abstract The WHO European Office for Integrated Health Care Services in Barcelona is an integral part of the World Health Organizations' Regional Office for Europe. The main purpose of the Barcelona office is within the integration of services to encourage and facilitate changes in health care services in order to promote health and improve management and patient satisfaction by working for quality, accessibility, cost-effectiveness and participation. This position paper outlines the need for Integrated Care from a European perspective, provides a theoretical framework for the meaning of Integrated Care and its strategies and summarizes the programmes of the office that will support countries in the WHO European Region to improve health services. PMID:16896400

  17. Testing Pixel Translation Digital Elevation Models to Reconstruct Slip Histories: An Example from the Agua Blanca Fault, Baja California, Mexico

    NASA Astrophysics Data System (ADS)

    Wilson, J.; Wetmore, P. H.; Malservisi, R.; Ferwerda, B. P.; Teran, O.

    2012-12-01

    We use recently collected slip vector and total offset data from the Agua Blanca fault (ABF) to constrain a pixel translation digital elevation model (DEM) to reconstruct the slip history of this fault. This model was constructed using a Perl script that reads a DEM file (Easting, Northing, Elevation) and a configuration file with coordinates that define the boundary of each fault segment. A pixel translation vector is defined as a magnitude of lateral offset in an azimuthal direction. The program translates pixels north of the fault and prints their pre-faulting position to a new DEM file that can be gridded and displayed. This analysis, where multiple DEMs are created with different translation vectors, allows us to identify areas of transtension or transpression while seeing the topographic expression in these areas. The benefit of this technique, in contrast to a simple block model, is that the DEM gives us a valuable graphic which can be used to pose new research questions. We have found that many topographic features correlate across the fault, i.e. valleys and ridges, which likely have implications for the age of the ABF, long term landscape evolution rates, and potentially provide conformation for total slip assessments The ABF of northern Baja California, Mexico is an active, dextral strike slip fault that transfers Pacific-North American plate boundary strain out of the Gulf of California and around the "Big Bend" of the San Andreas Fault. Total displacement on the ABF in the central and eastern parts of the fault is 10 +/- 2 km based on offset Early-Cretaceous features such as terrane boundaries and intrusive bodies (plutons and dike swarms). Where the fault bifurcates to the west, the northern strand (northern Agua Blanca fault or NABF) is constrained to 7 +/- 1 km. We have not yet identified piercing points on the southern strand, the Santo Tomas fault (STF), but displacement is inferred to be ~4 km assuming that the sum of slip on the NABF and STF is

  18. Integrative psychotherapy.

    PubMed

    Kozarić-Kovacić, Dragica

    2008-09-01

    The main purposes of the article are to present the history of integration in psychotherapy, the reasons of the development integrative approaches, and the approaches to integration in psychotherapy. Three approaches to integration in psychotherapy exist: theoretical integration, theoretical eclecticism, and common factors in different psychotherapeutic trends. In integrative psychotherapy, the basic epistemology, theory, and clinical practice are based on the phenomenology, field theory, holism, dialogue, and co-creation of dialogue in the therapeutic relationship. The main criticism is that integrative psychotherapy suffers from confusion and many unresolved controversies. It is difficult to theoretically and methodologically define the clinically applied model that is based on such a different epistemological and theoretical presumptions. Integrative psychotherapy is a synthesis of humanistic psychotherapy, object relations theory, and psychoanalytical self psychology. It focuses on the dynamics and potentials of human relationships, with a goal of changing the relations and understanding internal and external resistances. The process of integrative psychotherapy is primarily focused on the developmental-relational model and co-creation of psychotherapeutic relationship as a single interactive event, which is not unilateral, but rather a joint endeavor by both the therapist and the patient/client. The need for a relationship is an important human need and represents a process of attunement that occurs as a response to the need for a relationship, a unique interpersonal contact between two people. If this need is not met, it manifests with the different feelings and various defenses. To meet this need, we need to have another person with whom we can establish a sensitive, attuned relationship. Thus, the therapist becomes this person who tries to supplement what the person did not receive. Neuroscience can be a source of integration through different therapies. We

  19. Functional Integration

    NASA Astrophysics Data System (ADS)

    Cartier, Pierre; DeWitt-Morette, Cecile

    2010-06-01

    Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

  20. Functional Integration

    NASA Astrophysics Data System (ADS)

    Cartier, Pierre; DeWitt-Morette, Cecile

    2006-11-01

    Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

  1. Integrative neuroscience.

    PubMed

    Gordon, Evian

    2003-07-01

    A fundamental impediment to an "Integrative Neuroscience" is the sense that scientists building models at one particular scale often see that scale as the epicentre of all brain function. This fragmentation has begun to change in a very distinctive way. Multidisciplinary efforts have provided the impetus to break down the boundaries and encourage a freer exchange of information across disciplines and scales. Despite huge deficits of knowledge, sufficient facts about the brain already exist, for an Integrative Neuroscience to begin to lift us clear of the jungle of detail, and shed light upon the workings of the brain as a system. Integrations of brain theory can be tested using judicious paradigm designs and measurement of temporospatial activity reflected in brain imaging technologies. However, to test realistically these new hypotheses requires consistent findings of the normative variability in very large numbers of control subjects, coupled with high sensitivity and specificity of findings in psychiatric disorders. Most importantly, these findings need to be analyzed and modeled with respect to the fundamental mechanisms underlying these measures. Without this convergence of theory, databases, and methodology (including across scale physiologically realistic numerical models), the clinical utility of brain imaging technologies in psychiatry will be significantly impeded. The examples provided in this paper of integration of theory, temporospatial integration of neuroimaging technologies, and a numerical simulation of brain function, bear testimony to the ongoing conversion of an Integrative Neuroscience from an exemplar status into reality.

  2. Spatial-Temporal Distribution of Hantavirus Rodent-Borne Infection by Oligoryzomys fulvescens in the Agua Buena Region - Panama

    PubMed Central

    Gonzalez, Publio; Cumbrera, Alberto; Rivero, Alina; Avila, Mario; Armién, Aníbal G.; Koster, Frederick; Glass, Gregory

    2016-01-01

    Background Hotspot detection and characterization has played an increasing role in understanding the maintenance and transmission of zoonotic pathogens. Identifying the specific environmental factors (or their correlates) that influence reservoir host abundance help increase understanding of how pathogens are maintained in natural systems and are crucial to identifying disease risk. However, most recent studies are performed at macro-scale and describe broad temporal patterns of population abundances. Few have been conducted at a microscale over short time periods that better capture the dynamical patterns of key populations. These finer resolution studies may better define the likelihood of local pathogen persistence. This study characterizes the landscape distribution and spatio-temporal dynamics of Oligoryzomys fulvescens (O. fulvescens), an important mammalian reservoir in Central America. Methods Information collected in a longitudinal study of rodent populations in the community of Agua Buena in Tonosí, Panama, between April 2006 and December 2009 was analyzed using non-spatial analyses (box plots) and explicit spatial statistical tests (correlograms, SADIE and LISA). A 90 node grid was built (raster format) to design a base map. The area between the nodes was 0.09 km2 and the total study area was 6.43 km2 (2.39 x 2.69 km). The temporal assessment dataset was divided into four periods for each year studied: the dry season, rainy season, and two months-long transitions between seasons (the months of April and December). Results There were heterogeneous patterns in the population densities and degrees of dispersion of O. fulvescens that varied across seasons and among years. The species typically was locally absent during the late transitional months of the season, and re-established locally in subsequent years. These populations re-occurred in the same area during the first three years but subsequently re-established further south in the final year of the

  3. Classical integrability

    NASA Astrophysics Data System (ADS)

    Torrielli, Alessandro

    2016-08-01

    We review some essential aspects of classically integrable systems. The detailed outline of the sections consists of: 1. Introduction and motivation, with historical remarks; 2. Liouville theorem and action-angle variables, with examples (harmonic oscillator, Kepler problem); 3. Algebraic tools: Lax pairs, monodromy and transfer matrices, classical r-matrices and exchange relations, non-ultralocal Poisson brackets, with examples (non-linear Schrödinger model, principal chiral field); 4. Features of classical r-matrices: Belavin–Drinfeld theorems, analyticity properties, and lift of the classical structures to quantum groups; 5. Classical inverse scattering method to solve integrable differential equations: soliton solutions, spectral properties and the Gel’fand–Levitan–Marchenko equation, with examples (KdV equation, Sine-Gordon model). Prepared for the Durham Young Researchers Integrability School, organised by the GATIS network. This is part of a collection of lecture notes.

  4. Classical integrability

    NASA Astrophysics Data System (ADS)

    Torrielli, Alessandro

    2016-08-01

    We review some essential aspects of classically integrable systems. The detailed outline of the sections consists of: 1. Introduction and motivation, with historical remarks; 2. Liouville theorem and action-angle variables, with examples (harmonic oscillator, Kepler problem); 3. Algebraic tools: Lax pairs, monodromy and transfer matrices, classical r-matrices and exchange relations, non-ultralocal Poisson brackets, with examples (non-linear Schrödinger model, principal chiral field); 4. Features of classical r-matrices: Belavin-Drinfeld theorems, analyticity properties, and lift of the classical structures to quantum groups; 5. Classical inverse scattering method to solve integrable differential equations: soliton solutions, spectral properties and the Gel’fand-Levitan-Marchenko equation, with examples (KdV equation, Sine-Gordon model). Prepared for the Durham Young Researchers Integrability School, organised by the GATIS network. This is part of a collection of lecture notes.

  5. The Integrated Hazard Analysis Integrator

    NASA Technical Reports Server (NTRS)

    Morris, A. Terry; Massie, Michael J.

    2009-01-01

    Hazard analysis addresses hazards that arise in the design, development, manufacturing, construction, facilities, transportation, operations and disposal activities associated with hardware, software, maintenance, operations and environments. An integrated hazard is an event or condition that is caused by or controlled by multiple systems, elements, or subsystems. Integrated hazard analysis (IHA) is especially daunting and ambitious for large, complex systems such as NASA s Constellation program which incorporates program, systems and element components that impact others (International Space Station, public, International Partners, etc.). An appropriate IHA should identify all hazards, causes, controls and verifications used to mitigate the risk of catastrophic loss of crew, vehicle and/or mission. Unfortunately, in the current age of increased technology dependence, there is the tendency to sometimes overlook the necessary and sufficient qualifications of the integrator, that is, the person/team that identifies the parts, analyzes the architectural structure, aligns the analysis with the program plan and then communicates/coordinates with large and small components, each contributing necessary hardware, software and/or information to prevent catastrophic loss. As viewed from both Challenger and Columbia accidents, lack of appropriate communication, management errors and lack of resources dedicated to safety were cited as major contributors to these fatalities. From the accident reports, it would appear that the organizational impact of managers, integrators and safety personnel contributes more significantly to mission success and mission failure than purely technological components. If this is so, then organizations who sincerely desire mission success must put as much effort in selecting managers and integrators as they do when designing the hardware, writing the software code and analyzing competitive proposals. This paper will discuss the necessary and

  6. Information Integrity

    ERIC Educational Resources Information Center

    Graves, Eric

    2013-01-01

    This dissertation introduces the concept of Information Integrity, which is the detection and possible correction of information manipulation by any intermediary node in a communication system. As networks continue to grow in complexity, information theoretic security has failed to keep pace. As a result many parties whom want to communicate,…

  7. Numerical Integration

    ERIC Educational Resources Information Center

    Sozio, Gerry

    2009-01-01

    Senior secondary students cover numerical integration techniques in their mathematics courses. In particular, students would be familiar with the "midpoint rule," the elementary "trapezoidal rule" and "Simpson's rule." This article derives these techniques by methods which secondary students may not be familiar with and an approach that…

  8. Integrating maps requires integrated data

    SciTech Connect

    Weissenbach, J.; Bentolila, S.

    1996-06-01

    The molecular genetics movement has proceeded admirably thanks to new technologies such as polymerase chain reaction (PCR) sequencing. However, the integration of mapping data has not yet been achieved. This article discussing several problem areas and serves as a reminder of the urgency of such concerns.

  9. RADIATION INTEGRATOR

    DOEpatents

    Glass, F.M.; Wilson, H.N.

    1959-02-17

    Radiation detecting and measuring systems, particularly a compact, integrating, background monitor, are discussed. One of the principal features of the system is the use of an electrometer tube where the input of the tube is directly connected to an electrode of the radiation detector and a capacitor is coupled to the tube input. When a predetermined quantity of radiation has been integrated, a trigger signal is fed to a recorder and a charge is delivered to the capacitor to render the tube inoperative. The capacitor is then recharged for the next period of operation. With this arrangement there is a substantial reduction in lead lengths and the principal components may be enclosed and hermetically sealed to insure low leakage.

  10. Integrated Fluorescence

    NASA Technical Reports Server (NTRS)

    Tuma, Margaret (Inventor); Gruhlke, Russell W. (Inventor)

    1998-01-01

    A detection method is integrated with a filtering method and an enhancement method to create a fluorescence sensor that can be miniaturized. The fluorescence sensor comprises a thin film geometry including a waveguide layer, a metal film layer and sensor layer. The thin film geometry of the fluorescence sensor allows the detection of fluorescent radiation over a narrow wavelength interval. This enables wavelength discrimination and eliminates the detection of unwanted light from unknown or spurious sources.

  11. Mapping mangrove leaf area index at the species level using IKONOS and LAI-2000 sensors for the Agua Brava Lagoon, Mexican Pacific

    NASA Astrophysics Data System (ADS)

    Kovacs, John M.; Wang, Jinfei; Flores-Verdugo, Francisco

    2005-01-01

    Using both IKONOS and in situ LAI-2000 sensor data, a map of estimated LAI, based on NDVI, was created for the Agua Brava Lagoon, Mexican Pacific. The LAI values were then aggregated according to four classes; red mangrove ( Rhizophora mangle), healthy white mangrove ( Laguncularia racemosa), poor condition white mangrove and dead mangrove. Of the live mangrove, calculated at approximately 85% of the forest, mean LAI values of 2.49, 1.74 and 0.85 were determined for the red, healthy white and poor condition white mangrove, respectively. Excluding the dead areas, an overall estimated mangrove LAI value of 1.81 was ascertained for the 71 km 2 of mapped mangrove forest. Although the results do suggest the technique as a very rapid and effective method for monitoring the condition of mangroves at the species level, potential limitations are also discussed.

  12. ACCELERATION INTEGRATOR

    DOEpatents

    Pope, K.E.

    1958-01-01

    This patent relates to an improved acceleration integrator and more particularly to apparatus of this nature which is gyrostabilized. The device may be used to sense the attainment by an airborne vehicle of a predetermined velocitv or distance along a given vector path. In its broad aspects, the acceleration integrator utilizes a magnetized element rotatable driven by a synchronous motor and having a cylin drical flux gap and a restrained eddy- current drag cap deposed to move into the gap. The angular velocity imparted to the rotatable cap shaft is transmitted in a positive manner to the magnetized element through a servo feedback loop. The resultant angular velocity of tae cap is proportional to the acceleration of the housing in this manner and means may be used to measure the velocity and operate switches at a pre-set magnitude. To make the above-described dcvice sensitive to acceleration in only one direction the magnetized element forms the spinning inertia element of a free gyroscope, and the outer housing functions as a gimbal of a gyroscope.

  13. Nonplanar integrability

    NASA Astrophysics Data System (ADS)

    Carlson, Warren; de Mello Koch, Robert; Lin, Hai

    2011-03-01

    In this article we study operators with a dimension Δ ˜ O( N) and show that simple analytic expressions for the action of the dilatation operator can be found. The operators we consider are restricted Schur polynomials. There are two distinct classes of operators that we consider: operators labeled by Young diagrams with two long columns or two long rows. The main complication in working with restricted Schur polynomials is in building a projector from a given S n+ m irreducible representation to an S n × S m irreducible representation (both specified by the labels of the restricted Schur polynomial). We give an explicit construction of these projectors by reducing it to the simple problem of addition of angular momentum in ordinary non-relativistic quantum mechanics. The diagonalization of the dilatation operator reduces to solving three term recursion relations. The fact that the recursion relations have only three terms is a direct consequence of the weak mixing at one loop of the restricted Schur polynomials. The recursion relations can be solved exactly in terms of symmetric Kravchuk polynomials or in terms of Clebsch-Gordan coefficients. This proves that the dilatation operator reduces to a decoupled set of harmonic oscillators and therefore it is integrable.

  14. Benthic foraminiferal biostratigraphy of the Aalenian-Bajocian (Middle Jurassic) boundary in the Barranco de Agua Larga section (Betic Cordillera, southern Spain)

    NASA Astrophysics Data System (ADS)

    Silva, Sílvia; Canales, María Luisa; Sandoval, José; Henriques, Maria Helena

    2016-04-01

    This work describes the benthic foraminiferal assemblages recorded across the Aalenian - Bajocian boundary in the Barranco de Agua Larga section (Betic Cordillera, SE of Spain), where the ammonite record has enabled the recognition of the Gigantea Subzone in the Bradfordensis Zone (Middle Aalenian), the Concavum and Limitatum subzones in the Concavum Zone (Upper Aalenian) and the Discites Zone (Lower Bajocian). This reference section is characterized by an alternation of limestones and marly limestones corresponding to distal marine environmental conditions, where a total of 17 samples have been collected. They have provided abundant and diverse foraminiferal assemblages, constituted by well-preserved specimens displaying close similarities to those already described for the Jurassic carbonate platforms of the Boreal Realm. From the study of the samples, a total of 3139 specimens have been obtained, corresponding to 5 suborders, 11 families, 25 genus and 80 species. The representatives of the Suborder Lagenina are the most abundant, Vaginulinidae is the most abundant family and Lenticulina is the most abundant genus. From a specific level, the most abundant species are Thurammina jurensis (Franke), Lenticulina muensteri (Roemer) and Prodentalina pseudocommunis (Franke). The occurrence of Astacolus dorbignyi (Roemer) in the Gigantea Subzone has enabled the recognition of the Astacolus dorbignyi Zone. The first occurrence of Lenticulina quenstedti (Gümbel) in the Concavum Subzone has allowed the recognition of the Lenticulina quenstedti Zone. In Barranco de Agua Larga section this species co-occur with Ramulina spandeli Paalzow, the index fossil used in the establishment of the Ramulina spandeli Zone. This zone was defined in the lower part of the Discites Zone in the Murtinheira section (the Bajocian GSSP) and related to distal platform conditions. In the Iberian Basin the Ramulina spandeli Zone was recognized in the Hontoria del Pinar section, but not in the

  15. Constraining Basin Geometry and Fault Kinematics on the Santo Tomas Segment of the Agua Blanca Fault Through a Combined Geophysical and Structural Study

    NASA Astrophysics Data System (ADS)

    Springer, A.; Wetmore, P.; Fletcher, J.; Connor, C. B.; Callihan, S.; Beeson, J.; Wilson, J.

    2008-12-01

    The Santo Tomas basin, located in northern Baja California, formed at a right step in the dextral Agua Blanca fault (ABF). The ABF extends for more than 120km east from Punta Banda, with an east-west strike, and represents the southernmost fault in the San Andreas system of faulting. The basin is located roughly 40km south of Ensenada where the Agua Blanca fault intersects the Maximos fault. A detailed geophysical analysis defines the basin geometry, and helps to constrain the distribution and offset of mapped and concealed faults. Geophysical and structural data sets are combined to constrain the kinematic evolution of the Santo Tomas basin, including determining the relative amount of dip-slip and strike-slip motion on basin-bounding faults. Gravity data was collected over seven transects across and along the axis of the basin at 500 meter intervals, with 200 meter intervals at locations of known or inferred faults. Magnetic data were taken over the same lines, and are used in conjunction with gravity data to constrain the locations, geometries and displacements of intrabasinal faults. The combined gravity and magnetic data are modeled using Geosoft Oasis montaj software to create 2 3/4D models along profiles across the study area. Modeling of the geophysical data combined with structural mapping indicates that the Santo Tomas basin is bound by two major strike-slip faults, the ABF on the northeastern side and the Maximos fault on south, Based on offset markers, most of the strike-slip motion appears to be concentrated on the ABF on the north side of the basin. The ABF fault is characterized by multiple subparallel fault strands that appear to coalesce into single strands to the northwest and southeast of the basin. The Maximos is characterized by a single strand throughout the basin and it exhibits a minor dip-slip component. Basin sediments thicken slightly against the Maximos fault to as much as 1km. A third fault, cutting across the basin southeast of the

  16. Petrographic Evidence of Microbial Mats in the Upper Cretaceous Fish-Bearing, Organic-Rich Limestone, Agua Nueva Formation, Central Mexico

    NASA Astrophysics Data System (ADS)

    Blanco, A.; Maurrasse, F. J.; Hernández-Ávila, J.; Ángeles-Trigueros, S. A.; García-Cabrera, M. E.

    2013-05-01

    We document petrographic evidence of microbial mats in the Upper Cretaceous Agua Nueva Formation in the area of Xilitla (San Luis Potosí, Central Mexico), located in the southern part of the Tampico-Misantla basin. The sequence consists predominantly of alternating decimeter-thick beds of fossiliferous dark laminated limestone (C-org > 1.0wt%), and light gray, bioturbated limestone (C-org < 1.0wt%), with occasional brown shale and green bentonite layers. Well-preserved fossil-fish assemblages occur in the laminated dark limestone beds, which include shark teeth (cf. Ptychodus), scales of teleosteans (Ichthyodectiformes), as well as skeletal remains of holosteans (Nursallia. sp), and teleosteans (cf. Rhynchodercetis, Tselfatia, and unidentified Enchodontids). Thin section and SEM analyses of the laminated, dark limestones, reveal a micritic matrix consisting of dark and light sub-parallel wavy laminae, continuous and discontinuous folded laminae with shreds of organic matter, filaments, oncoids, and interlocking structures. The structures are identical to those previously described for the Cenomanian-Turonian Indidura Fm at Parras de la Fuente (Coahuila state) demonstrated to be of microbial origin (Duque-Botero and Maurrasse, 2005; 2008). These structures are also analogous to microbial mats in present environments, and Devonian deposits (Kremer, 2006). In addition, the laminae at Xilitla include filamentous bacterial structures, as thin and segmented red elements. In some thin sections, filaments appear to be embedded within the crinkly laminae and shreds showing the same pattern of folding, suggestive of biomorphic elements that represent the main producers of the organic matter associated with the laminae. Thus, exceptional bacterial activity characterizes sedimentation during the accumulation of the Agua Nueva Formation. Oxygen-deficient conditions related to the microbial mats were an important element in the mass mortality and preservation of the fish

  17. Elliptic integrals: Symmetry and symbolic integration

    SciTech Connect

    Carlson, B.C. |

    1997-12-31

    Computation of elliptic integrals, whether numerical or symbolic, has been aided by the contributions of Italian mathematicians. Tricomi had a strong interest in iterative algorithms for computing elliptic integrals and other special functions, and his writings on elliptic functions and elliptic integrals have taught these subjects to many modern readers (including the author). The theory of elliptic integrals began with Fagnano`s duplication theorem, a generalization of which is now used iteratively for numerical computation in major software libraries. One of Lauricella`s multivariate hypergeometric functions has been found to contain all elliptic integrals as special cases and has led to the introduction of symmetric canonical forms. These forms provide major economies in new integral tables and offer a significant advantage also for symbolic integration of elliptic integrals. Although partly expository the present paper includes some new proofs and proposes a new procedure for symbolic integration.

  18. An assessment of Spain's Programa AGUA and its implications for sustainable water management in the province of Almería, southeast Spain.

    PubMed

    Downward, Stuart R; Taylor, Ros

    2007-01-01

    Spain's Programa AGUA was proposed in 2004 as a replacement for the Spanish National Hydrological Plan and represented a fundamental policy shift in national water management from large inter-basin water transfers to a commitment to desalination. Twenty-one desalination facilities are planned for six provinces on the Spanish Mediterranean coast to supplement their water needs. These include the province of Almería that for the last 30 years has endured a net water abstraction overdraft leading to serious reservoir depletion and groundwater imbalances. Rising water use is a result of increasing demand to support irrigated agriculture (e.g. greenhouse horticulture) and for domestic needs (e.g. rapid urban growth and tourism development), which has led observers to question Almería's long-term water sustainability. Desalinated water alone is unlikely to be sufficient to make up these water deficits and water-users will have to accept a move to full-price water recovery by 2010 under the European Union (EU) Water Framework Directive of which Spain is a signatory. Anticipated water efficiencies resulting from higher water tariffs, increasing water reuse and water infrastructure improvements (including inter-basin transfers), in conjunction with increasing use of desalinated water, are expected to address the province's current water overdraft. However, Almería will need to balance its planned initiatives against long-term estimates of projected agricultural and domestic development and the environmental consequences of adopting a desalination-supported water future.

  19. A late Holocene paleoenvironmental reconstruction from Agua Caliente, southern Belize, linked to regional climate variability and cultural change at the Maya polity of Uxbenká

    NASA Astrophysics Data System (ADS)

    Walsh, Megan K.; Prufer, Keith M.; Culleton, Brendan J.; Kennett, Douglas J.

    2014-07-01

    We report high-resolution macroscopic charcoal, pollen and sedimentological data for Agua Caliente, a freshwater lagoon located in southern Belize, and infer a late Holocene record of human land-use/climate interactions for the nearby prehistoric Maya center of Uxbenká. Land-use activities spanning the initial clearance of forests for agriculture through the drought-linked Maya collapse and continuing into the historic recolonization of the region are all reflected in the record. Human land alteration in association with swidden agriculture is evident early in the record during the Middle Preclassic starting ca. 2600 cal yr BP. Fire slowly tapered off during the Late and Terminal Classic, consistent with the gradual political demise and depopulation of the Uxbenká polity sometime between ca. 1150 and 950 cal yr BP, during a period of multiple droughts evident in a nearby speleothem record. Fire activity was at its lowest during the Maya Postclassic ca. 950-430 cal yr BP, but rose consistent with increasing recolonization of the region between ca. 430 cal yr BP and present. These data suggest that this environmental record provides both a proxy for 2800 years of cultural change, including colonization, growth, decline, and reorganization of regional populations, and an independent confirmation of recent paleoclimate reconstructions from the same region.

  20. Evaluating Simultaneous Integrals

    ERIC Educational Resources Information Center

    Kwong, Harris

    2012-01-01

    Many integrals require two successive applications of integration by parts. During the process, another integral of similar type is often invoked. We propose a method which can integrate these two integrals simultaneously. All we need is to solve a linear system of equations.

  1. Quantifying Hydrological Ecosystem Services of Various Land Covers and Uses on Small Experimental Catchments within the Panama Canal Watershed: The Agua Salud Project

    NASA Astrophysics Data System (ADS)

    Crouch, T. D.; Ogden, F. L.; Agua Salud Project

    2011-12-01

    As a part of the Agua Salud Project, a baseline characterization of hydrologic processes on the small catchment scale (~0.24 to 2.0 km2) is assessed across different land uses and covers typical to rural Panama. The land covers being monitored include a mature secondary forest, a disturbed catchment with a mosaic of various aged secondary growth and agricultural use, an active pasture and a monoculture invasive grass site as experimental controls, and two treated catchments that were recently abandoned pastures converted to teak and native species timber plantations. The catchments are found within Panama's protected Soberania National Park and the adjacent headwaters of the Agua Salud and Mendoza Rivers, all part of the greater Panama Canal Watershed. Using hydrological data from the first two and a half years of the project, three main ecosystem services are observed. The forested area exhibited lower storm event peaks, decreased flashiness, and greater stream flow during the dry season compared to the disturbed mosaic site. Lower hydrograph peaks and flashiness mitigate the risk of substantial flood damage during the major flood events generally seen in Panama between October and December. The mature forest (1.35 km2) catchment has shown lower average flood peaks in comparison to the disturbed site. For storm peaks less than 6 mm/hr, flood peaks are on average 51% lower. For storm peaks greater than 6 mm/hr, flood peaks are approximately 40% lower. In 1998, draft restrictions were imposed in the Panama Canal because of a deficit of dry season water after an El Niño-Southern Oscillation resulted in decreased wet season rainfall. The water that is available during the end of the dry season has the potential to insure the full operation of the Canal during El Niño drought years. Toward the end of the dry season (March through May) our data shows that roughly 34% more water was available during a relatively dry year with respect to antecedent wet season rainfall

  2. Cyanobacteria/Foraminifera Association from Anoxic/Dysoxic Beds of the Agua Nueva Formation (Upper Cretaceous - Cenomanian/Turonian) at Xilitla, San Luis Potosi, Central Mexico

    NASA Astrophysics Data System (ADS)

    Blanco-Piñón, A.; Maurrasse, F. J.; Rojas-León, A.; Duque-Botero, F.

    2008-05-01

    The Agua Nueva Formation in the vicinity of Xilitla, State of San Luis Potosí, Central Mexico, consists of interbedded brown shale (Grayish orange 10YR 7/4 to Moderate yellowish brown 10YR 5/4) and dark-gray fossiliferous limestone (Bluish gray 5B 6/1 to Dark bluish gray 5B 4/1), varying between 10 and 20 cm in thickness. The sequence also includes 2 to 4 cm- thick intermittent bentonite layers (Moderate greenish yellow 10Y 7/4, to dark greenish yellow 10Y 6/6 and Light olive 10Y 5/4). At the field scale, shaly intervals show no apparent internal structures, whereas most limestone beds show primary lamination at the millimeter scale (1-2 mm), and intermittent layers of black chert of about 5 cm thick. Pyrite is present as disseminated crystals and as 2 cm-thick layers. Bioturbation or macrobenthic organisms other than inoceramids do not occur in the Agua Nueva Formation at Xilitla. Unusual macrofossils are present only in limestone strata, and consist of well- preserved diverse genera of fishes such as sharks, Ptychodus sp. and teleosteans, Rhynchodercetis sp., Tselfatia sp., Goulmimichthys sp., and scales of Ichtyodectiformes, as well as ammonites and inoceramids (Blanco et al., 2006). The presence of Inoceramus (Mytyloides) labiatus (Maldonado-Koederll, 1956) indicates an Early Turonian age for the sequence. Total carbonate content (CaCO3 = TIC) varies between 62 and 94% in the Limestone beds, which yield Total Organic Carbon (TOC) from 0.4% to 2.5%; the shale intervals contain TIC values consistently lower than 33% and TOC lower than 0.8% Microscopically the limestone beds vary from mudstone to packstone composed essentially of coccoid cyanobacteria similar to coeval deposits in northeastern Mexico, Coahuila State, at Parras de La Fuente (Duque- Botero 2006). Similarly, the microspheroids are spherical to sub-spherical, and occur as isolated elements or aggregates forming series of chains of parallel-packed light lamina 1-2 mm thick. Filamentous cyanobacteria

  3. Using laboratory flow experiments and reactive chemical transport modeling for designing waterflooding of the Agua Fria Reservoir, Poza Rica-Altamira Field, Mexico

    SciTech Connect

    Birkle, P.; Pruess, K.; Xu, T.; Figueroa, R.A. Hernandez; Lopez, M. Diaz; Lopez, E. Contreras

    2008-10-01

    Waterflooding for enhanced oil recovery requires that injected waters must be chemically compatible with connate reservoir waters, in order to avoid mineral dissolution-and-precipitation cycles that could seriously degrade formation permeability and injectivity. Formation plugging is a concern especially in reservoirs with a large content of carbonates, such as calcite and dolomite, as such minerals typically react rapidly with an aqueous phase, and have strongly temperature-dependent solubility. Clay swelling can also pose problems. During a preliminary waterflooding pilot project, the Poza Rica-Altamira oil field, bordering the Gulf coast in the eastern part of Mexico, experienced injectivity loss after five months of reinjection of formation waters into well AF-847 in 1999. Acidizing with HCl restored injectivity. We report on laboratory experiments and reactive chemistry modeling studies that were undertaken in preparation for long-term waterflooding at Agua Frma. Using analogous core plugs obtained from the same reservoir interval, laboratory coreflood experiments were conducted to examine sensitivity of mineral dissolution and precipitation effects to water composition. Native reservoir water, chemically altered waters, and distilled water were used, and temporal changes in core permeability, mineral abundances and aqueous concentrations of solutes were monitored. The experiments were simulated with the multi-phase, nonisothermal reactive transport code TOUGHREACT, and reasonable to good agreement was obtained for changes in solute concentrations. Clay swelling caused an additional impact on permeability behavior during coreflood experiments, whereas the modeled permeability depends exclusively on chemical processes. TOUGHREACT was then used for reservoir-scale simulation of injecting ambient-temperature water (30 C, 86 F) into a reservoir with initial temperature of 80 C (176 F). Untreated native reservoir water was found to cause serious porosity and

  4. TIPs for Technology Integration.

    ERIC Educational Resources Information Center

    Mandell, Susan; Sorge, Dennis H.; Russell, James D.

    2002-01-01

    Discusses the role of the teacher in effectively using technology in education based on the Technology Integration Project (TIP). Topics include why use technology; types of computer software; how to select software; software integration strategies; and effectively planning lessons that integrate the chosen software and integration strategy. (LRW)

  5. Slimplectic Integrators: Variational Integrators for Nonconservative systems

    NASA Astrophysics Data System (ADS)

    Tsang, David

    2016-05-01

    Symplectic integrators are widely used for long-term integration of conservative astrophysical problems due to their ability to preserve the constants of motion; however, they cannot in general be applied in the presence of nonconservative interactions. Here we present the “slimplectic” integrator, a new type of numerical integrator that shares many of the benefits of traditional symplectic integrators yet is applicable to general nonconservative systems. We utilize a fixed-time-step variational integrator formalism applied to a newly developed principle of stationary nonconservative action (Galley, 2013, Galley et al 2014). As a result, the generalized momenta and energy (Noether current) evolutions are well-tracked. We discuss several example systems, including damped harmonic oscillators, Poynting–Robertson drag, and gravitational radiation reaction, by utilizing our new publicly available code to demonstrate the slimplectic integrator algorithm. Slimplectic integrators are well-suited for integrations of systems where nonconservative effects play an important role in the long-term dynamical evolution. As such they are particularly appropriate for cosmological or celestial N-body dynamics problems where nonconservative interactions, e.g., gas interactions or dissipative tides, can play an important role.

  6. Slimplectic Integrators: Variational Integrators for Nonconservative systems

    NASA Astrophysics Data System (ADS)

    Tsang, David

    2016-01-01

    Symplectic integrators are widely used for long-term integration of conservative astrophysical problems due to their ability to preserve the constants of motion; however, they cannot in general be applied in the presence of nonconservative interactions. In this Letter, we develop the "slimplectic" integrator, a new type of numerical integrator that shares many of the benefits of traditional symplectic integrators yet is applicable to general nonconservative systems. We utilize a fixed-time-step variational integrator formalism applied to the principle of stationary nonconservative action developed in Galley et al. As a result, the generalized momenta and energy (Noether current) evolutions are well-tracked. We discuss several example systems, including damped harmonic oscillators, Poynting-Robertson drag, and gravitational radiation reaction, by utilizing our new publicly available code to demonstrate the slimplectic integrator algorithm. Slimplectic integrators are well-suited for integrations of systems where nonconservative effects play an important role in the long-term dynamical evolution. As such they are particularly appropriate for cosmological or celestial N-body dynamics problems where nonconservative interactions, e.g., gas interactions or dissipative tides, can play an important role.

  7. Two Related Parametric Integrals

    ERIC Educational Resources Information Center

    Dana-Picard, T.

    2007-01-01

    Two related sequences of definite integrals are considered. By mixing hand-work, computer algebra system assistance and websurfing, fine connections can be studied between integrals and a couple of interesting sequences of integers. (Contains 4 tables.)

  8. Integration in action.

    PubMed

    Green, Sara; Wolkenhauer, Olaf

    2012-09-01

    The workshop on 'Integration in Biology and Biomedicine' was held in May 2012 at the University of Sydney. It brought together scientists and philosophers to discuss the need for, and practice of, integration in the life sciences.

  9. Quality Integrated Education

    ERIC Educational Resources Information Center

    Brazziel, William

    1978-01-01

    Integrated education as it exists in many communities is actually harmful to black children and works to devastate rather than develop black talent; proponents of school integration must put effort into improving the quality of all schools. (JD)

  10. The universal path integral

    NASA Astrophysics Data System (ADS)

    Lloyd, Seth; Dreyer, Olaf

    2016-02-01

    Path integrals calculate probabilities by summing over classical configurations of variables such as fields, assigning each configuration a phase equal to the action of that configuration. This paper defines a universal path integral, which sums over all computable structures. This path integral contains as sub-integrals all possible computable path integrals, including those of field theory, the standard model of elementary particles, discrete models of quantum gravity, string theory, etc. The universal path integral possesses a well-defined measure that guarantees its finiteness. The probabilities for events corresponding to sub-integrals can be calculated using the method of decoherent histories. The universal path integral supports a quantum theory of the universe in which the world that we see around us arises out of the interference between all computable structures.

  11. Integrated optics technology study

    NASA Technical Reports Server (NTRS)

    Chen, B.; Findakly, T.; Innarella, R.

    1982-01-01

    The status and near term potential of materials and processes available for the fabrication of single mode integrated electro-optical components are discussed. Issues discussed are host material and orientation, waveguide formation, optical loss mechanisms, wavelength selection, polarization effects and control, laser to integrated optics coupling fiber optic waveguides to integrated optics coupling, sources, and detectors. Recommendations of the best materials, technology, and processes for fabrication of integrated optical components for communications and fiber gyro applications are given.

  12. Integrated optics technology study

    NASA Technical Reports Server (NTRS)

    Chen, B.

    1982-01-01

    The materials and processes available for the fabrication of single mode integrated electrooptical components are described. Issues included in the study are: (1) host material and orientation, (2) waveguide formation, (3) optical loss mechanisms, (4) wavelength selection, (5) polarization effects and control, (6) laser to integrated optics coupling,(7) fiber optic waveguides to integrated optics coupling, (8) souces, (9) detectors. The best materials, technology and processes for fabrication of integrated optical components for communications and fiber gyro applications are recommended.

  13. Boolean integral calculus

    NASA Technical Reports Server (NTRS)

    Tucker, Jerry H.; Tapia, Moiez A.; Bennett, A. Wayne

    1988-01-01

    The concept of Boolean integration is developed, and different Boolean integral operators are introduced. Given the changes in a desired function in terms of the changes in its arguments, the ways of 'integrating' (i.e. realizing) such a function, if it exists, are presented. The necessary and sufficient conditions for integrating, in different senses, the expression specifying the changes are obtained. Boolean calculus has applications in the design of logic circuits and in fault analysis.

  14. Monitoring Colonias Development along the United States-Mexico Border: A Process Application using GIS and Remote Sensing in Douglas, Arizona, and Agua Prieta, Sonora

    USGS Publications Warehouse

    Norman, Laura M.; Donelson, Angela J.; Pfeifer, Edwin L.; Lam, Alven H.; Osborn, Kenneth J.

    2004-01-01

    The U.S. Department of Housing and Urban Development (HUD) and the U.S. Geological Survey (USGS) have developed a joint project to create Internet-enabled geographic information systems (GIS) that will help cities along the United States-Mexico border deal with issues related to colonias. HUD defines colonias as rural neighborhoods in the United States-Mexico border region that lack adequate infrastructure or housing and other basic services. They typically have high poverty rates that make it difficult for residents to pay for roads, sanitary water and sewer systems, decent housing, street lighting, and other services through assessment. Many Federal agencies recognize colonias designations and provide funding assistance. It is the intention of this project to empower Arizona-Sonora borderland neighborhoods and community members by recognizing them as colonias. This recognition will result in eligibility for available economic subsidies and accessibility to geospatial tools and information for urban planning. The steps to achieve this goal include delineation of colonia-like neighborhoods, identification of their urbanization over time, development of geospatial databases describing their infrastructure, and establishment of a framework for distributing Web-based GIS decision support systems. A combination of imagery and infrastructure information was used to help delineate colonia boundaries. A land-use change analysis, focused on urbanization in the cities over a 30-year timeframe, was implemented. The results of this project are being served over the Internet, providing data to the public as well as to participating agencies. One of the initial study areas for this project was the City of Douglas, Ariz., and its Mexican sister-city Agua Prieta, Sonora, which are described herein. Because of its location on the border, this twin-cities area is especially well suited to international manufacturing and commerce, which has, in turn, led to an uncontrolled spread of

  15. Integrated Education. Feature Issue.

    ERIC Educational Resources Information Center

    York, Jennifer, Ed.; Vandercook, Terri, Ed.

    1988-01-01

    This "feature issue" provides various perspectives on a number of integrated education topics, including successful integration practices and strategies, the changing roles of teachers, the appropriate role of research, the history and future of integrated education, and the realization of dreams of life in the mainstream for children with severe…

  16. Sledge-Hammer Integration

    ERIC Educational Resources Information Center

    Ahner, Henry

    2009-01-01

    Integration (here visualized as a pounding process) is mathematically realized by simple transformations, successively smoothing the bounding curve into a straight line and the region-to-be-integrated into an area-equivalent rectangle. The relationship to Riemann sums, and to the trapezoid and midpoint methods of numerical integration, is…

  17. Social Integration and Divorce.

    ERIC Educational Resources Information Center

    Booth, Alan; And Others

    1991-01-01

    Longitudinal data on over 1,300 married persons suggest that divorce was deterred by absence of divorce in reference group (normative integration) and was deterred for shorter marriages by more friends and organizational affiliations (communicative integration). Sharing friends and organization affiliations with spouse (functional integration) may…

  18. Photonic Integrated Circuits

    NASA Technical Reports Server (NTRS)

    Merritt, Scott; Krainak, Michael

    2016-01-01

    Integrated photonics generally is the integration of multiple lithographically defined photonic and electronic components and devices (e.g. lasers, detectors, waveguides passive structures, modulators, electronic control and optical interconnects) on a single platform with nanometer-scale feature sizes. The development of photonic integrated circuits permits size, weight, power and cost reductions for spacecraft microprocessors, optical communication, processor buses, advanced data processing, and integrated optic science instrument optical systems, subsystems and components. This is particularly critical for small spacecraft platforms. We will give an overview of some NASA applications for integrated photonics.

  19. Geology, geochemistry, geochronology, and economic potential of Neogene volcanic rocks in the Laguna Pedernal and Salar de Aguas Calientes segments of the Archibarca lineament, northwest Argentina

    NASA Astrophysics Data System (ADS)

    Richards, J. P.; Jourdan, F.; Creaser, R. A.; Maldonado, G.; DuFrane, S. A.

    2013-05-01

    This study presents new geochemical, geochronological, isotopic, and mineralogical data, combined with new geological mapping for a 2400 km2 area of Neogene volcanic rocks in northwestern Argentina near the border with Chile, between 25°10‧S and 25°45‧S. The area covers the zone of intersection between the main axis of the Cordillera Occidental and a set of NW-SE-trending structures that form part of the transverse Archibarca lineament. This lineament has localized major ore deposits in Chile (e.g., the late Eocene La Escondida porphyry Cu deposit) and large volcanic centers such as the active Llullaillaco and Lastarría volcanoes on the border between Chile and Argentina, and the Neogene Archibarca, Antofalla, and Cerro Galán volcanoes in Argentina. Neogene volcanic rocks in the Laguna Pedernal and Salar de Aguas Calientes areas are mostly high-K calc-alkaline in composition, and range from basaltic andesites, through andesites and dacites, to rhyolites. Magmatic temperatures and oxidation states, estimated from mineral compositions, range from ~ 1000 °C and ∆FMQ ≈ 1.0-1.5 in andesites, to ~ 850 °C and ∆FMQ ≈ 1.5-2.0 in dacites and rhyolites. The oldest rocks consist of early-middle Miocene andesite-dacite plagioclase-pyroxene-phyric lava flows and ignimbrites, with 40Ar/39Ar ages ranging from 17.14 ± 0.10 Ma to 11.76 ± 0.27 Ma. Their major and trace element compositions are typical of the Andean Central Volcanic Zone, and show strong crustal contamination trends for highly incompatible elements such as Cs, Rb, Th, and U. These rocks are geochemically grouped as sub-suite 1. This widespread intermediate composition volcanism was followed in the middle-late Miocene by a period of more focused rhyodacitic flow-dome complex formation. These felsic rocks are characterized by less extreme enrichments in highly incompatible elements, and increasing depletion of heavy rare earth elements. These rocks are geochemically grouped as sub-suite 2. The

  20. Characterisation of the sedimentary processes responsible for the filling and excavation of two intra mountainous basins (Agua Amarga and Collon Cura) in the Andes of Neuquén (Argentina) during the Neogene

    NASA Astrophysics Data System (ADS)

    Bonnel, C.; Huyghe, D.; Nivière, B.; Messager, G.; Dhont, D.; Fasentieux, B.; Hervouët, Y.; Xavier, J.-P.

    2012-04-01

    Intramontane basins constitute potential good recorders of orogenic systems deformation history through the documentation of their remnant sedimentary filling and observation of syntectonic growth strata. In this work, we focus on the Neuquén basin, located on the eastern flank of the Andes between 32°S and 41°S latitude. It has been structured since the late Triassic, first as back arc basin and as compressive foreland basin since the upper Cretaceous. Most of the sedimentary filling is composed of Mesozoic sediments, which have been importantly studied because of their hydrocarbon potential. On the contrary, Cenozoic tectonic and sedimentologic evolutions remain poorly documented in regard to the Mesozoic. The structural inheritance is very important and strongly influences the deformation and shortening rates from the North to the South of the basin. Thus, the northern part exhibits a classical configuration from the western high Andes, to younger fold and thrust belts and piggy-back basins to the East. On the contrary, no fold and thrust belt exist in the southern part of the basin and the deformation is restricted to the internal domain. Nevertheless, contemporaneous intramontane basins (the Agua Amarga to the North and the Collon Cura basin to the South) existed in these two parts of the basin and seem to have followed a similar evolution despite of a different structural context. To the North, the partial closing of the Agua Amarga basin by the growth of the Chuihuidos anticlines during the Miocene is characterised by the deposition of a fining upward continental sequence of ~250 m thick, from lacustrine environment at the base to alluvial and fluviatile environments in the upper part of the section. In the Collon Cura, the sedimentary filling, due to the rising of the Piedra del Aguila basement massif, reach at maximum 500 m and consist in fluvial tuffaceous material in the lower part to paleosoils and coarse conglomeratic fluvial deposits in the upper

  1. Misconceptions and Integration

    PubMed Central

    MORTAZ HEJRI, SARA; MIRZAZADEH, AZIM; JALILI, MOHAMMAD

    2015-01-01

    Introduction Pervasive beliefs regarding curricular reform and integration have flourished among medical students, faculty members and medical school administrators. These concepts have extensively impacted the reform process, sometimes by resisting the reforms and sometimes by diverting the curriculum from its planned objectives. In the current paper, we have tried to address the challenges of integration in MD program by looking at the existing literature and the experience of the international universities. Methods We collected the questions frequently asked during the curricular reform process. We, then, evaluated them, and selected 5 main ideas. In order to find their answers, we searched the literature using these keywords: integration, reform, and undergraduate medical curriculum. Results The findings are discussed in five sections: 1) Reform is not equivalent to integration, 2) Integration can be implemented in both high school and graduate programs, 3) Organ-system based integration is not the only method available for integration, 4) Integration of two phases (basic sciences and physiopathology) can be considered but it is not mandatory, 5) Integration does not fade basic sciences in favor of clinical courses. Conclusion It seems that medical education literature and prior experience of the leading universities do not support most of the usual concepts about integration. Therefore, it is important to consider informed decision making based on best evidence rather than personal opinions during the curricular reform process. PMID:26457318

  2. Faces of integration

    PubMed Central

    Williams, Paul; Sullivan, Helen

    2009-01-01

    Theme Two central themes permeate this paper—the interplay between structure and agency in integration processes and the extent to which this is mediated through sensemaking by individual actors. Case study The empirical base for the paper is provided by case study research from Wales which draws on examples of different types of integration in health and social care. The individual case studies highlight different interpretations of integration set against a background of the resources involved, processes employed and outcomes achieved. Discussion A wide ranging discussion exposes the complex interplay and dynamics between structural factors and the manner in which they enable or constrain integration, and individual actors realising their potential agency through leadership, professionalism and boundary spanning to influence outcomes. The importance of structure and agency complementing each other to determine effective integration is emphasised, together with the scope that is available for interpretation and meaning by individual actors within the contested discourse of integration. PMID:20087420

  3. Posible origen del agua terrestre

    NASA Astrophysics Data System (ADS)

    di Sisto, R. P.; Orellana, R. B.; Brunini, A.

    The most plausible sources of the terrestrial water are found in the main external asteroid belt, the giant planetary region and in the Kuiper belt, because of its great presence of ices. However, the timing of earth planets's formation (108 years) marks an inferior limit for the dynamical lifetime of the objects of interest since the previous megaimpacts would volatilize the icy material previusly accreted. The central parameter that allow us to rebuild the origin of water in the solar system is the rate of the Deuterium/Hydrogen isotope (D/H). The D/H measured in three comets has an average value two times greater that the value measured in the terrestrial oceans. Morbidelli et al. support that the main part of the present buldge of water on earth was product of the accretion, in the last formation stages, of some planetary embryos originally formed in the external asteroid belt. In the Jupiter zone, the D/H could be of the order of the terrestrial value. Then, we would have there posible sources with an apropiate isotopic composition that have survived for several 108 years. These sources are: the Troyan asteroids, objects in the Jupiter-Saturn region and objects in the external limit of the asteroidal belt. As for this last group we have considered in this work, the Hilda Family asteroids. The Hilda Family asteroids are placed in the 3/2 mean motion resonance with Jupiter. From the present distribution of the Hilda's orbital parameters, we generate randomly, inicial conditions for 500 massless particles in the Hildas region. Trough numerical simulations we follow their dynamical evolution during 500 millon years and its final state. The mayority of these particles are eyected out of the Solar System (76 %) due to the gravitational action of Jupiter and only a 24 % stay in the resonance zone. The 8.1 % of the particles that leave the resonance, hit Jupiter. Some objects have encounters with the terrestrial planets. From the number of encounters with each planet, we obtain the number of colisions and the total mass that impact with those planets. Assuming a primordial population of 108 objects in the Hildas zone, the mass that colide with Venus, the Earth and Mars is 4.6x1016 kg., 6.9x1016 kg. y 2.4x1016 kg. respectively. The total mass of water present on Earth is 3x1020 kg., much greater than the quantity provided by the hildas. So, this population wouldn't be the main responsable for the water in the terrestrial planets.

  4. Integrated Marketing Communications

    ERIC Educational Resources Information Center

    Black, Jim

    2004-01-01

    Integration has become a cliche in enrollment management and student services circles. The term is used to describe everything from integrated marketing to seamless services. Often, it defines organizational structures, processes, student information systems, and even communities. In Robert Sevier's article in this issue of "College and…

  5. Elementary Integrated Curriculum Framework

    ERIC Educational Resources Information Center

    Montgomery County Public Schools, 2010

    2010-01-01

    The Elementary Integrated Curriculum (EIC) Framework is the guiding curriculum document for the Elementary Integrated Curriculum and represents the elementary portion of the Montgomery County (Maryland) Public Schools (MCPS) Pre-K-12 Curriculum Frameworks. The EIC Framework contains the detailed indicators and objectives that describe what…

  6. System integration report

    NASA Technical Reports Server (NTRS)

    Badler, N. I.; Korein, J. D.; Meyer, C.; Manoochehri, K.; Rovins, J.; Beale, J.; Barr, B.

    1985-01-01

    Several areas that arise from the system integration issue were examined. Intersystem analysis is discussed as it relates to software development, shared data bases and interfaces between TEMPUS and PLAID, shaded graphics rendering systems, object design (BUILD), the TEMPUS animation system, anthropometric lab integration, ongoing TEMPUS support and maintenance, and the impact of UNIX and local workstations on the OSDS environment.

  7. Integration in Hydraulics.

    ERIC Educational Resources Information Center

    Sworder, Steven C.

    This paper presents an application of integration to the field of hydraulics. An integral relation for the time required to drop the fluid contained in a cylindrical tank from one level to another using a hole in the tank wall is derived. Procedures for constructing the experimental equipment and procedures for determining the coefficient of…

  8. Academic Research Integration System

    ERIC Educational Resources Information Center

    Surugiu, Iula; Velicano, Manole

    2008-01-01

    This paper comprises results concluding the research activity done so far regarding enhanced web services and system integration. The objective of the paper is to define the software architecture for a coherent framework and methodology for enhancing existing web services into an integrated system. This document presents the research work that has…

  9. Integrated Assessments for ELL

    ERIC Educational Resources Information Center

    Armon, Joan; Morris, Linda J.

    2008-01-01

    Despite the challenges posed by increased time, specialized vocabularies, and balance, integrating writing and drawing with science investigations is beneficial for teachers and students. This month's column explains why this integrated approach is beneficial, and illustrates how teachers can use it to meet the needs of students learning English…

  10. An Integrated Teaching Module.

    ERIC Educational Resources Information Center

    Samuel, Marie R.; Seiferth, Berniece B.

    This integrated teaching module provides elementary and junior high school teachers with a "hands-on" approach to studying the Anasazi Indian. Emphasis is on creative exploration that focuses on integrating art, music, poetry, writing, geography, dance, history, anthropology, sociology, and archaeology. Replicas of artifacts, contemporary Indian…

  11. The Fresnel Integrals Revisited

    ERIC Educational Resources Information Center

    Chen, Hongwei

    2009-01-01

    This note presents another elementary method to evaluate the Fresnel integrals. It is interesting to see that this technique is also strong enough to capture a number of pairs of parameter integrals. The main ingredients of the method are the consideration of some related derivatives and linear differential equations.

  12. Undulator Field Integral Measurements

    SciTech Connect

    Wolf, Zachary

    2010-12-07

    The LCLS undulator field integrals must be very small so that the beam trajectory slope and offset stay within tolerance. In order to make accurate measurements of the small field integrals, a long coil will be used. This note describes the design of the coil measurement system.

  13. Integrity in Student Development

    ERIC Educational Resources Information Center

    Roberts, Dennis C.; Banta, Trudy W.

    2011-01-01

    The quest for integrity in practice and theory has been part of the evolution of student personnel work all the way back to the turn of the 20th century. This chapter seeks to take stock of the question of integrity in relation to one of the core knowledge bases used by those engaged in student affairs work today--student development. The authors…

  14. Hermeneutics of Integrative Knowledge.

    ERIC Educational Resources Information Center

    Shin, Un-chol

    This paper examines and compares the formation processes and structures of three types of integrative knowledge that in general represent natural sciences, social sciences, and humanities. These three types can be observed, respectively, in the philosophies of Michael Polanyi, Jurgen Habermas, and Paul Ricoeur. These types of integrative knowledge…

  15. Integration by Hyperbolic Substitution

    ERIC Educational Resources Information Center

    Price, David

    2012-01-01

    Mathematics teachers constantly encourage their students to think independently. The study of integration in calculus provides an excellent opportunity to encourage inventive investigation. In contrast to differentiation, which is predominately mechanical, integration is a more creative process. One such possibility is offered by the study of the…

  16. Integrity in Transactional Leadership

    ERIC Educational Resources Information Center

    Miller, Thomas

    2011-01-01

    This chapter begins with a discussion of the impact of limited resources on the integrity of transactions between students and student affairs administrators. A framework and guiding principles for maintaining integrity are offered, and then some general principles for transactions with students are presented. Next, the chapter involves integrity…

  17. Integrating Module - NEMS Documentation

    EIA Publications

    2014-01-01

    Provides an overview of the complete National Energy Modeling System (NEMS) model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  18. Ready, Set, Integrate!

    ERIC Educational Resources Information Center

    McCombs, John

    2003-01-01

    Describes how the American Embassy School (AES) in New Delhi, India achieved school-wide technology integration. Discusses development of a new network; beginning to mentor; organizing the Technology Integration Plan (TIP) by software application; implementing the plan; assessing progress; and results, which overall, were positive. (AEF)

  19. Systems Integration (Fact Sheet)

    SciTech Connect

    Not Available

    2011-10-01

    The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

  20. Systems Integration (Fact Sheet)

    SciTech Connect

    DOE Solar Energy Technologies Program

    2011-10-13

    The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

  1. What Is Integral Theory?

    ERIC Educational Resources Information Center

    Marquis, Andre

    2007-01-01

    Integral theory is a way of knowing that helps foster the recognition that disparate aspects of reality--such as biological constitution, cultural worldviews, felt-sense of selfhood, and social systems--are all critically important to any knowledge quest. Integral theory provides an "all quadrants, all levels" (K. Wilber, 2006, p. 26)…

  2. Designing for STEM Integration

    ERIC Educational Resources Information Center

    Berland, Leema K.

    2013-01-01

    We are increasingly seeing an emphasis on STEM integration in high school classrooms such that students will learn and apply relevant math and science content while simultaneously developing engineering habits of mind. However, research in both science education and engineering education suggests that this goal of truly integrating STEM is rife…

  3. Retroviral integration: Site matters

    PubMed Central

    Demeulemeester, Jonas; De Rijck, Jan

    2015-01-01

    Here, we review genomic target site selection during retroviral integration as a multistep process in which specific biases are introduced at each level. The first asymmetries are introduced when the virus takes a specific route into the nucleus. Next, by co‐opting distinct host cofactors, the integration machinery is guided to particular chromatin contexts. As the viral integrase captures a local target nucleosome, specific contacts introduce fine‐grained biases in the integration site distribution. In vivo, the established population of proviruses is subject to both positive and negative selection, thereby continuously reshaping the integration site distribution. By affecting stochastic proviral expression as well as the mutagenic potential of the virus, integration site choice may be an inherent part of the evolutionary strategies used by different retroviruses to maximise reproductive success. PMID:26293289

  4. Algebraic integrability: a survey.

    PubMed

    Vanhaecke, Pol

    2008-03-28

    We give a concise introduction to the notion of algebraic integrability. Our exposition is based on examples and phenomena, rather than on detailed proofs of abstract theorems. We mainly focus on algebraic integrability in the sense of Adler-van Moerbeke, where the fibres of the momentum map are affine parts of Abelian varieties; as it turns out, most examples from classical mechanics are of this form. Two criteria are given for such systems (Kowalevski-Painlevé and Lyapunov) and each is illustrated in one example. We show in the case of a relatively simple example how one proves algebraic integrability, starting from the differential equations for the integrable vector field. For Hamiltonian systems that are algebraically integrable in the generalized sense, two examples are given, which illustrate the non-compact analogues of Abelian varieties which typically appear in such systems. PMID:17588863

  5. Integrated assessment briefs

    SciTech Connect

    1995-04-01

    Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

  6. Human-technology Integration

    NASA Astrophysics Data System (ADS)

    Mullen, Katharine M.

    Human-technology integration is the replacement of human parts and extension of human capabilities with engineered devices and substrates. Its result is hybrid biological-artificial systems. We discuss here four categories of products furthering human-technology integration: wearable computers, pervasive computing environments, engineered tissues and organs, and prosthetics, and introduce examples of currently realized systems in each category. We then note that realization of a completely artificial sytem via the path of human-technology integration presents the prospect of empirical confirmation of an aware artificially embodied system.

  7. Ethics and academic integrity.

    PubMed

    Milton, Constance L

    2015-01-01

    Academics from across the globe must navigate ever-increasing demands for research, practice, and educational productivity. With the increased demands, nurse faculty must choose value priorities and actions that reflect academic integrity. What does it mean to choose actions that reflect personal integrity in the academic arena? This article begins an important nursing philosophical and theoretical discussion that members and future members of the discipline of nursing must reflect upon and grapple with as they consider what it potentially means to act with straight thinking and integrity in academics. PMID:25520458

  8. GMRES and integral operators

    SciTech Connect

    Kelley, C.T.; Xue, Z.Q.

    1994-12-31

    Many discretizations of integral equations and compact fixed point problems are collectively compact and strongly convergent in spaces of continuous functions. These properties not only lead to stable and convergent approximations but also can be used in the construction of fast multilevel algorithms. Recently the GMRES algorithm has become a standard coarse mesh solver. The purpose of this paper is to show how the special properties of integral operators and their approximations are reflected in the performance of the GMRES iteration and how these properties can be used to strengthen the norm in which convergence takes place. The authors illustrate these ideas with composite Gauss rules for integral equations on the unit interval.

  9. The Integration Paradox

    PubMed Central

    Verkuyten, Maykel

    2016-01-01

    The integration paradox refers to the phenomenon of the more highly educated and structurally integrated immigrants turning away from the host society, rather than becoming more oriented toward it. This article provides an overview of the empirical evidence documenting this paradox in the Netherlands. In addition, the theoretical arguments and the available findings about the social psychological processes involved in this paradox are considered. The existing evidence for the integration paradox and what might explain it form the basis for making suggestion for future theoretical work and empirical research, and for discussing possible policy implications. PMID:27152028

  10. ELECTRONIC INTEGRATING CIRCUIT

    DOEpatents

    Englemann, R.H.

    1963-08-20

    An electronic integrating circuit using a transistor with a capacitor connected between the emitter and collector through which the capacitor discharges at a rate proportional to the input current at the base is described. Means are provided for biasing the base with an operating bias and for applying a voltage pulse to the capacitor for charging to an initial voltage. A current dividing diode is connected between the base and emitter of the transistor, and signal input terminal means are coupled to the juncture of the capacitor and emitter and to the base of the transistor. At the end of the integration period, the residual voltage on said capacitor is less by an amount proportional to the integral of the input signal. Either continuous or intermittent periods of integration are provided. (AEC)

  11. INTEGRAL and Cataclysmic Variables

    SciTech Connect

    Hudec, R.; Blazek, M.; Galis, R.; Kocka, M.

    2010-07-15

    The results of investigations of cataclysmic variables (CVs) with the ESA INTEGRAL satellite are briefly presented and discussed. It is evident that the satellite serves as an efficient tool to study some of these objects.

  12. Integrated Flywheel Technology, 1983

    NASA Technical Reports Server (NTRS)

    Keckler, C. R. (Editor); Rodriguez, G. E. (Editor); Groom, N. J. (Editor)

    1983-01-01

    Topics of discussion included: technology assessment of the integrated flywheel systems, potential of system concepts, identification of critical areas needing development and, to scope and define an appropriate program for coordinated activity.

  13. Retroviral DNA Integration

    PubMed Central

    2016-01-01

    The integration of a DNA copy of the viral RNA genome into host chromatin is the defining step of retroviral replication. This enzymatic process is catalyzed by the virus-encoded integrase protein, which is conserved among retroviruses and LTR-retrotransposons. Retroviral integration proceeds via two integrase activities: 3′-processing of the viral DNA ends, followed by the strand transfer of the processed ends into host cell chromosomal DNA. Herein we review the molecular mechanism of retroviral DNA integration, with an emphasis on reaction chemistries and architectures of the nucleoprotein complexes involved. We additionally discuss the latest advances on anti-integrase drug development for the treatment of AIDS and the utility of integrating retroviral vectors in gene therapy applications. PMID:27198982

  14. Payload missions integration

    NASA Technical Reports Server (NTRS)

    Mitchell, R. A. K.

    1983-01-01

    Highlights of the Payload Missions Integration Contract (PMIC) are summarized. Spacelab Missions no. 1 to 3, OSTA partial payloads, Astro-1 Mission, premission definition, and mission peculiar equipment support structure are addressed.

  15. Managing for Organizational Integrity.

    ERIC Educational Resources Information Center

    Paine, Lynn Sharp

    1994-01-01

    Compliance-based ethics programs focus on prevention, detection, and punishment. Companies should adopt an integrity-based approach to ethics management that combines a concern for the law with an emphasis on managerial responsibility for ethical behavior. (JOW)

  16. Aviation Data Integration System

    NASA Technical Reports Server (NTRS)

    Kulkarni, Deepak; Wang, Yao; Windrem, May; Patel, Hemil; Keller, Richard

    2003-01-01

    During the analysis of flight data and safety reports done in ASAP and FOQA programs, airline personnel are not able to access relevant aviation data for a variety of reasons. We have developed the Aviation Data Integration System (ADIS), a software system that provides integrated heterogeneous data to support safety analysis. Types of data available in ADIS include weather, D-ATIS, RVR, radar data, and Jeppesen charts, and flight data. We developed three versions of ADIS to support airlines. The first version has been developed to support ASAP teams. A second version supports FOQA teams, and it integrates aviation data with flight data while keeping identification information inaccessible. Finally, we developed a prototype that demonstrates the integration of aviation data into flight data analysis programs. The initial feedback from airlines is that ADIS is very useful in FOQA and ASAP analysis.

  17. Wellbore Integrity Network

    SciTech Connect

    Carey, James W.; Bachu, Stefan

    2012-06-21

    In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

  18. Integrated Programs Bibliography.

    ERIC Educational Resources Information Center

    Russell, Connie; Klassen, Aynsley

    2002-01-01

    Lists 58 journal articles and books, published 1989-2002, on integrated programs at the secondary level. Categories are: updates on the Ontario scene, suggestions for teachers, assessment, research, and program descriptions. (SV)

  19. Building an Integrated Study

    ERIC Educational Resources Information Center

    Collins, Myrtle T.; Greenberg, Marvin

    1974-01-01

    Article described a plan to develop integrated study through music activities. Students learned to become more independent learners while concentrating on more complex and creative activities. (Author/RK)

  20. Silicon-electroceramics integration

    SciTech Connect

    Tuller, H.L.

    1996-12-31

    Electroceramics provides unique functionality as sensors, transducers, and non-volatile storage media while silicon is nearly unique in its signal processing and micromechanical properties. We discuss how these two materials technologies, when integrated, provide unique devices and structures.

  1. Human Systems Integration Introduction

    NASA Video Gallery

    This lecture provides an overview of Human Systems Integration (HSI), its implementation cost and return on investment, HSI domains, how HSI fits into the NASA organization structure, HSI roles and...

  2. ALHAT Integration and Testing

    NASA Video Gallery

    Autonomous Landing and Hazard Avoidance Technology (ALHAT) project integration and testing takes place at NASA Langley Research Center. The ALHAT project is a multi-center initiative to enable vari...

  3. Complementary and Integrative Medicine

    MedlinePlus

    ... medical treatments that are not part of mainstream medicine. When you are using these types of care, it may be called complementary, integrative, or alternative medicine. Complementary medicine is used together with mainstream medical ...

  4. Acoustic integrated extinction

    PubMed Central

    Norris, Andrew N.

    2015-01-01

    The integrated extinction (IE) is defined as the integral of the scattering cross section as a function of wavelength. Sohl et al. (2007 J. Acoust. Soc. Am. 122, 3206–3210. (doi:10.1121/1.2801546)) derived an IE expression for acoustic scattering that is causal, i.e. the scattered wavefront in the forward direction arrives later than the incident plane wave in the background medium. The IE formula was based on electromagnetic results, for which scattering is causal by default. Here, we derive a formula for the acoustic IE that is valid for causal and non-causal scattering. The general result is expressed as an integral of the time-dependent forward scattering function. The IE reduces to a finite integral for scatterers with zero long-wavelength monopole and dipole amplitudes. Implications for acoustic cloaking are discussed and a new metric is proposed for broadband acoustic transparency. PMID:27547100

  5. Integrating Forensic Science.

    ERIC Educational Resources Information Center

    Funkhouser, John; Deslich, Barbara J.

    2000-01-01

    Explains the implementation of forensic science in an integrated curriculum and discusses the advantages of this approach. Lists the forensic science course syllabi studied in three high schools. Discusses the unit on polymers in detail. (YDS)

  6. PEV Integration with Renewables (Presentation)

    SciTech Connect

    Markel, T.

    2014-06-18

    This presentation discusses current research at NREL on integrating plug-in electric vehicles with the grid and using renewable energy to charge the grid. The Electric Vehicle Grid Integration (EVGI) and Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) are addressing the opportunities and technical requirements for vehicle grid integration that will increase marketability and lead to greater petroleum reduction.

  7. Streamlining Payload Integration

    NASA Technical Reports Server (NTRS)

    Lufkin, Susan N.

    2010-01-01

    Payload integration onto space transport vehicles and the International Space Station (ISS) is a complex process. Yet, cargo transport is the sole reason for any space mission, be it for ferrying humans, science, or hardware. As the largest such effort in history, the ISS offers a wide variety of payload experience. However, for any payload to reach the Space Station under the current process, Payload Developers face a list of daunting tasks that go well beyond just designing the payload to the constraints of the transport vehicle and its stowage topology. Payload customers are required to prove their payload s functionality, structural integrity, and safe integration - including under less than nominal situations. They must also plan for or provide training, procedures, hardware labeling, ground support, and communications. In addition, they must deal with negotiating shared consumables, integrating software, obtaining video, and coordinating the return of data and hardware. All the while, they must meet export laws, launch schedules, budget limits, and the consensus of more than 12 panel and board reviews. Despite the cost and infrastructure overhead, payload proposals have increased. Just in the span from FY08 to FY09, the NASA Payload Space Station Support Office budget rose from $78M to $96M in attempt to manage the growing manifest, but the potential number of payloads still exceeds available Payload Integration Management manpower. The growth has also increased management difficulties due to the fact that payloads are more frequently added to a flight schedule late in the flow. The current standard ISS template for payload integration from concept to payload turn-over is 36 months, or 18 months if the payload already has a preliminary design. Customers are increasingly requiring a turn-around of 3 to 6-months to meet market needs. The following paper suggests options for streamlining the current payload integration process in order to meet customer schedule

  8. 2014 SRP Integration Transcript

    NASA Technical Reports Server (NTRS)

    Steinberg, Susan

    2014-01-01

    HRP's mission is to reduce the risks to human health and performance during long-duration spaceflight. The HRP Integrated Research Plan (IRP) contains the research plans for the 32 risks that require research to characterize and mitigate. From its inception the "integrate" aspect of the IRP has denoted the integrated nature of risks to human health and performance. Even though each risk in the IRP has its own research plan and is tracked separately, the interrelated nature of health and performance requires that they be addressed in an integrative or holistic fashion so that the connectedness of physiological systems within the human body and the integrated response to spaceflight can be addressed. Common characteristics of the spaceflight environment include altered gravity, atmospheres, and light/dark cycles; space radiation; isolation; noise; and periods of high or low workload. Long-term exposure to this unique environment produces a suite of physiological effects such as stress; vision, neurocognitive, and anthropometric changes; circadian misalignment; fluid shifts; cardiovascular deconditioning; immune dysregulation; and altered nutritional requirements. Expanding cross-disciplinary integrative approaches that synthesize concepts or data from two or more disciplines would improve the identification and characterization risk factors, and enable the development of countermeasures relevant to multiple risks. Cross-disciplinary approaches might also help to illuminate problem areas that may arise when a countermeasure adversely impacts risks other than those which it was developed to mitigate, or to identify groupings of physiological changes that are likely to occur that may impact the overall risk posture. In 2014 HRP embarked on a pilot study that combined four SRPs (and 12 HRP risks) - Behavioral Health, Sensorimotor, Cardiovascular, and Bone/Muscle - specifically to discuss cross-disciplinary integration. The points outlined below were suggested to seed the

  9. Integrated spatial light modulator

    NASA Astrophysics Data System (ADS)

    Yu, Dong X.; Storti, George M.; Wrigley, Charles Y.

    1992-08-01

    We described here an integrated spatial light modulator (SLM) employing Quantex electron trapping (ET) materials. The light modulation is accomplished by emission of ET material, upon incident coherent infrared light, where a pattern is written to by previous visible light excitation. The ET based spatial light modulators offer unique advantages over other SLM devices, such as capability of converting incoherent input to coherent light output and of integrating the modulator, the photodetector, and the memory into a single, rugged unit.

  10. Integrated infrared array technology

    NASA Technical Reports Server (NTRS)

    Goebel, J. H.; Mccreight, C. R.

    1986-01-01

    An overview of integrated infrared (IR) array technology is presented. Although the array pixel formats are smaller, and the readout noise of IR arrays is larger, than the corresponding values achieved with optical charge-coupled-device silicon technology, substantial progress is being made in IR technology. Both existing IR arrays and those being developed are described. Examples of astronomical images are given which illustrate the potential of integrated IR arrays for scientific investigations.

  11. Integrated support structure

    NASA Technical Reports Server (NTRS)

    Bruneau, Stephen D.; Campbell, John T.; Struven, Christopher A.

    1990-01-01

    This Major Qualifying Project is part of the Advanced Space Design Program at WPI. The goal is to design a support structure for a NASA GetAway Special experimental canister. The payload integration, weight, volume, and structural integrity of the canister as specified by NASA guidelines were studied. The end result is a complete set of design drawings with interface drawings and data to specify the design and leave a base on which the next group can concentrate.

  12. The Integrated Medical Model

    NASA Technical Reports Server (NTRS)

    Kerstman, Eric; Minard, Charles; Saile, Lynn; Freiere deCarvalho, Mary; Myers, Jerry; Walton, Marlei; Butler, Douglas; Iyengar, Sriram; Johnson-Throop, Kathy; Baumann, David

    2010-01-01

    The goals of the Integrated Medical Model (IMM) are to develop an integrated, quantified, evidence-based decision support tool useful to crew health and mission planners and to help align science, technology, and operational activities intended to optimize crew health, safety, and mission success. Presentation slides address scope and approach, beneficiaries of IMM capabilities, history, risk components, conceptual models, development steps, and the evidence base. Space adaptation syndrome is used to demonstrate the model's capabilities.

  13. IDC Integrated Master Plan.

    SciTech Connect

    Clifford, David J.; Harris, James M.

    2014-12-01

    This is the IDC Re-Engineering Phase 2 project Integrated Master Plan (IMP). The IMP presents the major accomplishments planned over time to re-engineer the IDC system. The IMP and the associate Integrated Master Schedule (IMS) are used for planning, scheduling, executing, and tracking the project technical work efforts. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  14. Astrophysical integrated research environment

    NASA Astrophysics Data System (ADS)

    Zhou, Jianfeng; Yang, Yang

    2007-08-01

    Astrophysical Integrated Research Environment (AIRE), aims to integrate astrophysical data, analysis software and astrophysical knowledge into an easy-to-use Internet based environment. Therefore, astrophysicists from different institutes can constitute virtual research groups which are favorable to study some complex multi-band astrophysical phenomena. The AIRE was put into use in Center for Astrophysics, Tsinghua university in 2003. Up to now, there are 219 advanced users in this environment. Several astrophysical researches base on AIRE have generated some important published results.

  15. Imagery Integration Team

    NASA Technical Reports Server (NTRS)

    Calhoun, Tracy; Melendrez, Dave

    2014-01-01

    The Human Exploration Science Office (KX) provides leadership for NASA's Imagery Integration (Integration 2) Team, an affiliation of experts in the use of engineering-class imagery intended to monitor the performance of launch vehicles and crewed spacecraft in flight. Typical engineering imagery assessments include studying and characterizing the liftoff and ascent debris environments; launch vehicle and propulsion element performance; in-flight activities; and entry, landing, and recovery operations. Integration 2 support has been provided not only for U.S. Government spaceflight (e.g., Space Shuttle, Ares I-X) but also for commercial launch providers, such as Space Exploration Technologies Corporation (SpaceX) and Orbital Sciences Corporation, servicing the International Space Station. The NASA Integration 2 Team is composed of imagery integration specialists from JSC, the Marshall Space Flight Center (MSFC), and the Kennedy Space Center (KSC), who have access to a vast pool of experience and capabilities related to program integration, deployment and management of imagery assets, imagery data management, and photogrammetric analysis. The Integration 2 team is currently providing integration services to commercial demonstration flights, Exploration Flight Test-1 (EFT-1), and the Space Launch System (SLS)-based Exploration Missions (EM)-1 and EM-2. EM-2 will be the first attempt to fly a piloted mission with the Orion spacecraft. The Integration 2 Team provides the customer (both commercial and Government) with access to a wide array of imagery options - ground-based, airborne, seaborne, or vehicle-based - that are available through the Government and commercial vendors. The team guides the customer in assembling the appropriate complement of imagery acquisition assets at the customer's facilities, minimizing costs associated with market research and the risk of purchasing inadequate assets. The NASA Integration 2 capability simplifies the process of securing one

  16. UCSC Data Integrator and Variant Annotation Integrator

    PubMed Central

    Hinrichs, Angie S.; Raney, Brian J.; Speir, Matthew L.; Rhead, Brooke; Casper, Jonathan; Karolchik, Donna; Kuhn, Robert M.; Rosenbloom, Kate R.; Zweig, Ann S.; Haussler, David; Kent, W. James

    2016-01-01

    Summary: Two new tools on the UCSC Genome Browser web site provide improved ways of combining information from multiple datasets, optionally including the user's own custom track data and/or data from track hubs. The Data Integrator combines columns from multiple data tracks, showing all items from the first track along with overlapping items from the other tracks. The Variant Annotation Integrator is tailored to adding functional annotations to variant calls; it offers a more restricted set of underlying data tracks but adds predictions of each variant's consequences for any overlapping or nearby gene transcript. When available, it optionally adds additional annotations including effect prediction scores from dbNSFP for missense mutations, ENCODE regulatory summary tracks and conservation scores. Availability and implementation: The web tools are freely available at http://genome.ucsc.edu/ and the underlying database is available for download at http://hgdownload.cse.ucsc.edu/. The software (written in C and Javascript) is available from https://genome-store.ucsc.edu/ and is freely available for academic and non-profit usage; commercial users must obtain a license. Contact: angie@soe.ucsc.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:26740527

  17. Integrated work management system.

    SciTech Connect

    Williams, Edward J., Jr.; Henry, Karen Lynne

    2010-06-01

    Sandia National Laboratories develops technologies to: (1) sustain, modernize, and protect our nuclear arsenal (2) Prevent the spread of weapons of mass destruction; (3) Provide new capabilities to our armed forces; (4) Protect our national infrastructure; (5) Ensure the stability of our nation's energy and water supplies; and (6) Defend our nation against terrorist threats. We identified the need for a single overarching Integrated Workplace Management System (IWMS) that would enable us to focus on customer missions and improve FMOC processes. Our team selected highly configurable commercial-off-the-shelf (COTS) software with out-of-the-box workflow processes that integrate strategic planning, project management, facility assessments, and space management, and can interface with existing systems, such as Oracle, PeopleSoft, Maximo, Bentley, and FileNet. We selected the Integrated Workplace Management System (IWMS) from Tririga, Inc. Facility Management System (FMS) Benefits are: (1) Create a single reliable source for facility data; (2) Improve transparency with oversight organizations; (3) Streamline FMOC business processes with a single, integrated facility-management tool; (4) Give customers simple tools and real-time information; (5) Reduce indirect costs; (6) Replace approximately 30 FMOC systems and 60 homegrown tools (such as Microsoft Access databases); and (7) Integrate with FIMS.

  18. HIV DNA Integration

    PubMed Central

    Craigie, Robert; Bushman, Frederic D.

    2012-01-01

    Retroviruses are distinguished from other viruses by two characteristic steps in the viral replication cycle. The first is reverse transcription, which results in the production of a double-stranded DNA copy of the viral RNA genome, and the second is integration, which results in covalent attachment of the DNA copy to host cell DNA. The initial catalytic steps of the integration reaction are performed by the virus-encoded integrase (IN) protein. The chemistry of the IN-mediated DNA breaking and joining steps is well worked out, and structures of IN-DNA complexes have now clarified how the overall complex assembles. Methods developed during these studies were adapted for identification of IN inhibitors, which received FDA approval for use in patients in 2007. At the chromosomal level, HIV integration is strongly favored in active transcription units, which may promote efficient viral gene expression after integration. HIV IN binds to the cellular factor LEDGF/p75, which promotes efficient infection and tethers IN to favored target sites. The HIV integration machinery must also interact with many additional host factors during infection, including nuclear trafficking and pore proteins during nuclear entry, histones during initial target capture, and DNA repair proteins during completion of the DNA joining steps. Models for some of the molecular mechanisms involved have been proposed, but important details remain to be clarified. PMID:22762018

  19. Integrated Budget Office Toolbox

    NASA Technical Reports Server (NTRS)

    Rushing, Douglas A.; Blakeley, Chris; Chapman, Gerry; Robertson, Bill; Horton, Allison; Besser, Thomas; McCarthy, Debbie

    2010-01-01

    The Integrated Budget Office Toolbox (IBOT) combines budgeting, resource allocation, organizational funding, and reporting features in an automated, integrated tool that provides data from a single source for Johnson Space Center (JSC) personnel. Using a common interface, concurrent users can utilize the data without compromising its integrity. IBOT tracks planning changes and updates throughout the year using both phasing and POP-related (program-operating-plan-related) budget information for the current year, and up to six years out. Separating lump-sum funds received from HQ (Headquarters) into separate labor, travel, procurement, Center G&A (general & administrative), and servicepool categories, IBOT creates a script that significantly reduces manual input time. IBOT also manages the movement of travel and procurement funds down to the organizational level and, using its integrated funds management feature, helps better track funding at lower levels. Third-party software is used to create integrated reports in IBOT that can be generated for plans, actuals, funds received, and other combinations of data that are currently maintained in the centralized format. Based on Microsoft SQL, IBOT incorporates generic budget processes, is transportable, and is economical to deploy and support.

  20. Ideal Integrating Bolometer

    NASA Technical Reports Server (NTRS)

    Kogut, A.; DiPirro, M.; Moseley, S. H.

    2004-01-01

    We describe a new "ideal integrator" bolometer as a prototype for a new generation of sensitive, flexible far-IR detectors suitable for use in large arrays. The combination of a non-dissipative sensor coupled with a fast heat switch provides breakthrough capabilities in both sensitivity and operation. The bolometer temperature varies linearly with the integrated infrared power incident on the detector, and may be sampled intermittently without loss of information between samples. The sample speed and consequent dynamic range depend only on the heat switch reset cycle and can be selected in software. Between samples, the device acts as an ideal integrator with noise significantly lower than resistive bolometers. Since there is no loss of information between samples, the device is well-suited for large arrays. A single SQUID readout could process an entire column of detectors, greatly reducing the complexity, power requirements, and cost of readout electronics for large pixel arrays.

  1. Chewing over physiology integration.

    PubMed

    Abdulkader, Fernando; Azevedo-Martins, Anna Karenina; Miranda, Manoel de Arcisio; Brunaldi, Kellen

    2005-03-01

    An important challenge for both students and teachers of physiology is to integrate the different areas in which physiological knowledge is didactically divided. In developing countries, such an issue is even more demanding, because budget restrictions often affect the physiology program with laboratory classes being the first on the list when it comes to cuts in expenses. With the aim of addressing this kind of problem, the graduate students of our department organized a physiology summer course offered to undergraduate students. The objective was to present the different physiological systems in an integrated fashion. The strategy pursued was to plan laboratory classes whose experimental results were the basis for the relevant theoretical discussions. The subject we developed to illustrate physiology integration was the study of factors influencing salivary secretion.

  2. Partially integrated exhaust manifold

    SciTech Connect

    Hayman, Alan W; Baker, Rodney E

    2015-01-20

    A partially integrated manifold assembly is disclosed which improves performance, reduces cost and provides efficient packaging of engine components. The partially integrated manifold assembly includes a first leg extending from a first port and terminating at a mounting flange for an exhaust gas control valve. Multiple additional legs (depending on the total number of cylinders) are integrally formed with the cylinder head assembly and extend from the ports of the associated cylinder and terminate at an exit port flange. These additional legs are longer than the first leg such that the exit port flange is spaced apart from the mounting flange. This configuration provides increased packaging space adjacent the first leg for any valving that may be required to control the direction and destination of exhaust flow in recirculation to an EGR valve or downstream to a catalytic converter.

  3. Integrated digital networks

    NASA Astrophysics Data System (ADS)

    Schwartz, M.; Stern, T.; Lazar, A.

    1984-09-01

    The basic problem described in this document is that of transmitting mixtures of traffic of disparate types over a variety of communication networks. Typical examples include the transmission of interactive data, long streams of data (e.g., file transfers), voice, video, and facsimile in an integrated fashion. Network types include local area networks, metropolitan area networks, large geographically-dispersed terrestrial networks, and satellite networks. Ongoing standards work in the C CITT, supported by telephone administrations worldwide, has focused on the concept of Integrated Services Digital Networks (ISDN) toward which worldwide telecommunications will be moving. Computer manufacturers with a great deal of interest in communications (IBM is a prominent example) have begun to devote considerable effort as well to the concept of traffic integration over networks.

  4. Integrated building design

    NASA Astrophysics Data System (ADS)

    Sanguinetti, Jennifer

    2005-04-01

    For many years, building design has been a very linear process with owners speaking to architects who then design building shells that they pass along to sub-consultants who must fit their systems into the allotted spaces. While this process has some advantages, it provides little opportunity to optimize systems based on such factors as energy use or occupant comfort. This presentation will focus on the evolution and implications of integrated building design, a method that has provided greater opportunities for interaction between design disciplines and with building users early on in the design process. Integration has resulted in buildings that are more sustainable than typical buildings and that can respond better to the needs of the owner and users. Examples of the application of the process and the resulting buildings will be presented from the view of a design engineer with experience of both processes. Specifically, the potential contribution of an acoustical consultant in the integrated process will be explored.

  5. Integral diode solar cells

    SciTech Connect

    Mardesich, W.; Gillanders, M.S.

    1984-05-01

    To achieve high power at minimum weight, innovative array designs are needed. In the case where shadows fall across a series element in a simple circuit, the effective power will be reduced or eliminated. The conventional method of eliminating this loss is the introduction of bypass diodes. This method increases cost and weight and reduces available surface area. An alternative solution to the shadowing problem is to use integral diode solar cells. The integral diode cell has a built-in diode on the back that protects the adjacent cell and passes the current if it is shadowed. This paper will describe the effort to produce the integral diode cells in a production facility with a minimum cost impact. The electrical characterization of the cell as well as the diode will be presented. These cells can be readily manufactured in a production facility using photoresist defined contacting process.

  6. Chewing over physiology integration.

    PubMed

    Abdulkader, Fernando; Azevedo-Martins, Anna Karenina; Miranda, Manoel de Arcisio; Brunaldi, Kellen

    2005-03-01

    An important challenge for both students and teachers of physiology is to integrate the different areas in which physiological knowledge is didactically divided. In developing countries, such an issue is even more demanding, because budget restrictions often affect the physiology program with laboratory classes being the first on the list when it comes to cuts in expenses. With the aim of addressing this kind of problem, the graduate students of our department organized a physiology summer course offered to undergraduate students. The objective was to present the different physiological systems in an integrated fashion. The strategy pursued was to plan laboratory classes whose experimental results were the basis for the relevant theoretical discussions. The subject we developed to illustrate physiology integration was the study of factors influencing salivary secretion. PMID:15718383

  7. Integrated Avionics System (IAS)

    NASA Technical Reports Server (NTRS)

    Hunter, D. J.

    2001-01-01

    As spacecraft designs converge toward miniaturization and with the volumetric and mass constraints placed on avionics, programs will continue to advance the 'state of the art' in spacecraft systems development with new challenges to reduce power, mass, and volume. Although new technologies have improved packaging densities, a total system packaging architecture is required that not only reduces spacecraft volume and mass budgets, but increase integration efficiencies, provide modularity and scalability to accommodate multiple missions. With these challenges in mind, a novel packaging approach incorporates solutions that provide broader environmental applications, more flexible system interconnectivity, scalability, and simplified assembly test and integration schemes. This paper will describe the fundamental elements of the Integrated Avionics System (IAS), Horizontally Mounted Cube (HMC) hardware design, system and environmental test results. Additional information is contained in the original extended abstract.

  8. Integration and Beyond

    PubMed Central

    Stead, William W.; Miller, Randolph A.; Musen, Mark A.; Hersh, William R.

    2000-01-01

    The vision of integrating information—from a variety of sources, into the way people work, to improve decisions and process—is one of the cornerstones of biomedical informatics. Thoughts on how this vision might be realized have evolved as improvements in information and communication technologies, together with discoveries in biomedical informatics, and have changed the art of the possible. This review identified three distinct generations of “integration” projects. First-generation projects create a database and use it for multiple purposes. Second-generation projects integrate by bringing information from various sources together through enterprise information architecture. Third-generation projects inter-relate disparate but accessible information sources to provide the appearance of integration. The review suggests that the ideas developed in the earlier generations have not been supplanted by ideas from subsequent generations. Instead, the ideas represent a continuum of progress along the three dimensions of workflow, structure, and extraction. PMID:10730596

  9. Reflections on 'autistic integrity'.

    PubMed

    Russell, Barbara

    2012-03-01

    Autism, particularly its moderate to severe forms, has prompted considerable scientific study and clinical involvement because the associated behaviours imply disconnections with valued features of a 'good' life, such as close relationships, enjoyment, and adaptability. Proposed causes of autism involve potent philosophical concepts including consciousness, identity, mind, and relationality. The concept of autistic integrity is used by Barnbaum in The Ethics of Autism: Among Them, But Not of Them to help provide moral justification to stop efforts to cure adults with autism, especially if the cause is presumed to be a lack of a theory of mind.(1) This article has two goals: (1) to apply four familiar definitions or characterizations of integrity to the case of moderate to severe autism, and (2) to examine whether autistic integrity does provide the moral justification Barnbaum seeks.

  10. Integrative oncology: an overview.

    PubMed

    Deng, Gary; Cassileth, Barrie

    2014-01-01

    Integrative oncology, the diagnosis-specific field of integrative medicine, addresses symptom control with nonpharmacologic therapies. Known commonly as "complementary therapies" these are evidence-based adjuncts to mainstream care that effectively control physical and emotional symptoms, enhance physical and emotional strength, and provide patients with skills enabling them to help themselves throughout and following mainstream cancer treatment. Integrative or complementary therapies are rational and noninvasive. They have been subjected to study to determine their value, to document the problems they ameliorate, and to define the circumstances under which such therapies are beneficial. Conversely, "alternative" therapies typically are promoted literally as such; as actual antitumor treatments. They lack biologic plausibility and scientific evidence of safety and efficacy. Many are outright fraudulent. Conflating these two very different categories by use of the convenient acronym "CAM," for "complementary and alternative therapies," confuses the issue and does a substantial disservice to patients and medical professionals. Complementary and integrative modalities have demonstrated safety value and benefits. If the same were true for "alternatives," they would not be "alternatives." Rather, they would become part of mainstream cancer care. This manuscript explores the medical and sociocultural context of interest in integrative oncology as well as in "alternative" therapies, reviews commonly-asked patient questions, summarizes research results in both categories, and offers recommendations to help guide patients and family members through what is often a difficult maze. Combining complementary therapies with mainstream oncology care to address patients' physical, psychologic and spiritual needs constitutes the practice of integrative oncology. By recommending nonpharmacologic modalities that reduce symptom burden and improve quality of life, physicians also enable

  11. NASA Integrated Network COOP

    NASA Technical Reports Server (NTRS)

    Anderson, Michael L.; Wright, Nathaniel; Tai, Wallace

    2012-01-01

    Natural disasters, terrorist attacks, civil unrest, and other events have the potential of disrupting mission-essential operations in any space communications network. NASA's Space Communications and Navigation office (SCaN) is in the process of studying options for integrating the three existing NASA network elements, the Deep Space Network, the Near Earth Network, and the Space Network, into a single integrated network with common services and interfaces. The need to maintain Continuity of Operations (COOP) after a disastrous event has a direct impact on the future network design and operations concepts. The SCaN Integrated Network will provide support to a variety of user missions. The missions have diverse requirements and include anything from earth based platforms to planetary missions and rovers. It is presumed that an integrated network, with common interfaces and processes, provides an inherent advantage to COOP in that multiple elements and networks can provide cross-support in a seamless manner. The results of trade studies support this assumption but also show that centralization as a means of achieving integration can result in single points of failure that must be mitigated. The cost to provide this mitigation can be substantial. In support of this effort, the team evaluated the current approaches to COOP, developed multiple potential approaches to COOP in a future integrated network, evaluated the interdependencies of the various approaches to the various network control and operations options, and did a best value assessment of the options. The paper will describe the trade space, the study methods, and results of the study.

  12. Integrated Functionality: Nanosensors

    NASA Astrophysics Data System (ADS)

    Devreese, Jozef T.

    2008-03-01

    Integrated nanosensors are nanostructured systems in which several sensors of different types have been integrated on a single platform including those sensitive to optical, magnetic, chemical, or biological stimuli [1,2]. Nanoparticle-based detector systems rely on the development of nanoparticles as sensing species. I discuss state-of-the-art nanosensors which are based on various advanced materials: nanoshells and nanorice, gold nanoparticles with attached fluorescent dyes, nanopores, carbon nanotubes, neuroelectronic hybrid systems, semiconductor nanocrystals and quantum-dot quantum wells (QDQW's). Phonon-assisted optical processes in semiconductor nanocrystals and QDQW's are highly sensitive to their shape and geometry i. a. due to the non-adiabaticity of the exciton-phonon systems. This sensitivity opens new perspectives for applications of quantum dots in optical sensing. For example, the simultaneous consideration of the tetrahedral shape of a CdS/HgS/CdS QDQW, interface optical phonons, and non-adiabatic phonon-assisted transitions allows for control of the photoluminescence of a QDQW [3]. Quantum-dot-based systems are also considered as examples of communication with nanodevices, which is a prerequisite of their integration. Nanosensors allow for building a new class of integrated devices, which provide the elemental base for ``intelligent sensors'' capable of data processing, storage and analysis. The development of integrated nanosensors could have many applications in several fields such as process monitoring, robotics, environmental, medical, consumer, homeland security [1] I. K. Schuller, http://nanosensors.ucsd.edu/Introduction.htm. [2] J. T. Devreese and Y. Bruynseraede, Integrated Nanosensors. McGraw-Hill 2008 Yearbook of Science & Technology, McGraw-Hill, 2008. [3] V. A. Fonoberov, E. P. Pokatilov, V. M. Fomin, and J. T. Devreese, Phys. Rev. Lett. 92, 127402 (2004).

  13. Embracing Integrative Multiomics Approaches

    PubMed Central

    2016-01-01

    As “-omics” data technology advances and becomes more readily accessible to address complex biological questions, increasing amount of cross “-omics” dataset is inspiring the use and development of integrative bioinformatics analysis. In the current review, we discuss multiple options for integrating data across “-omes” for a range of study designs. We discuss established methods for such analysis and point the reader to in-depth discussions for the various topics. Additionally, we discuss challenges and new directions in the area. PMID:27689071

  14. Integrating with integrins

    NASA Technical Reports Server (NTRS)

    Schwartz, M. A.; Ingber, D. E.

    1994-01-01

    Our central claim is that signaling by integrins provides a mechanism by which signals generated in response to adhesion, soluble hormones, and mechanical forces can interact. Such interactions permit cells to integrate these different classes of external stimuli and hence to orchestrate an efficient response. This integrating function of integrins is likely to be essential for much of development and physiology, as well as complex pathologies such as cancer. Understanding in detail how these signals are transduced and processed is likely to be an important area of research in the near future.

  15. Smart Grid Integration Laboratory

    SciTech Connect

    Troxell, Wade

    2011-12-22

    The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU's overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory's focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of

  16. Integral rocket ramjets

    NASA Astrophysics Data System (ADS)

    Calzone, R. F.

    1994-03-01

    A rough overview of the important aspects and problem areas associated with the development of Integral Rocket Ramjet (IRR) technology is given in this report. The IRR is a supersonic air-breathing concept in which the gas generator produces fuel-rich gases. These fuel-rich gases are burnt in the secondary combustion chamber with ambient air captured and decelerated in the inlet. During the boost phase, a solid propellant booster provides the thrust necessary to achieve the velocity at which the ramjet may be operated (about M = 2). The booster is integrated in the secondary combustion chamber.

  17. Integrated Safety Analysis Tiers

    NASA Technical Reports Server (NTRS)

    Shackelford, Carla; McNairy, Lisa; Wetherholt, Jon

    2009-01-01

    Commercial partnerships and organizational constraints, combined with complex systems, may lead to division of hazard analysis across organizations. This division could cause important hazards to be overlooked, causes to be missed, controls for a hazard to be incomplete, or verifications to be inefficient. Each organization s team must understand at least one level beyond the interface sufficiently enough to comprehend integrated hazards. This paper will discuss various ways to properly divide analysis among organizations. The Ares I launch vehicle integrated safety analyses effort will be utilized to illustrate an approach that addresses the key issues and concerns arising from multiple analysis responsibilities.

  18. On integrable conservation laws

    PubMed Central

    Arsie, Alessandro; Lorenzoni, Paolo; Moro, Antonio

    2015-01-01

    We study normal forms of scalar integrable dispersive (not necessarily Hamiltonian) conservation laws, via the Dubrovin–Zhang perturbative scheme. Our computations support the conjecture that such normal forms are parametrized by infinitely many arbitrary functions that can be identified with the coefficients of the quasi-linear part of the equation. Moreover, in general, we conjecture that two scalar integrable evolutionary partial differential equations having the same quasi-linear part are Miura equivalent. This conjecture is also consistent with the tensorial behaviour of these coefficients under general Miura transformations. PMID:25568614

  19. Environmental integrity, racism, health.

    PubMed

    Westra, L

    1996-05-17

    Environmental degradation seriously affects human health. Thus, a close relationship exists between the protection of ecosystem integrity and wilderness on one hand, and human health on the other. However, there is an overarching, holistic perspective in laws and regulations--as well as morality--to to maintain a healthy relationship between the two. Problem areas focused on in this paper are: (a) climate change and global warming; (b) food production; and (c) global equity. This paper argues for the principle of integrity, which provides an holistic perspective, suggested as a better approach than that of current regulations to mitigate against associated threats to human health.

  20. Finnish care integrated?

    PubMed Central

    Niskanen, J. Jouni

    2002-01-01

    Abstract The public Finnish social and health care system has been challenged by the economic crisis, administrative reforms and increased demands. Better integration as a solution includes many examples, which have been taken to use. The most important are the rewritten national and municipals strategies and quality recommendations, where the different sectors and the levels of care are seen as one entity. Many reorganisations have taken place, both nationally and locally, and welfare clusters have been established. The best examples of integrated care are the forms of teamwork, care management, emphasis on non-institutional care and the information technology. PMID:16896395

  1. Integrated biogas systems

    NASA Astrophysics Data System (ADS)

    Amaratunga, M.

    1980-01-01

    Integrated biogas systems as alternatives to fossil fuels in Sri Lanka are considered from standpoints of population growth, land availability, and employment opportunities. Agricultural practices would be improved by use of chemical fertilizers, and health/nutrition problems be alleviated by using biogas systems. Fuel for cooking and rural industries will become more easily available; water weeds, such as water hyacinth and salvinia which pose a threat to waterways and rice paddy lands could be used for the production of biogas and fertilizers. A concept of an integrated biogas system comprising photosynthesis and anaerobic degradation processes to produce food and energy is presented.

  2. The benefits of integration.

    PubMed

    Ciuffi, A

    2016-04-01

    Retroviruses, including the human immunodeficiency virus (HIV), are notorious for two essential steps of their viral replication: reverse transcription and integration. This latter property is considered to be essential for productive replication and ensures the stable long-term insertion of the viral genome sequence in the host chromatin, thereby leading to the life-long association of the virus with the infected cell. Using HIV as a prototypic example, the present review aims to provide an overview of how and where integration occurs, as well as presenting general consequences for both the virus and the infected host. PMID:27107301

  3. Integrated heterodyne terahertz transceiver

    DOEpatents

    Lee, Mark; Wanke, Michael C.

    2009-06-23

    A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

  4. Integrated heterodyne terahertz transceiver

    DOEpatents

    Wanke, Michael C.; Lee, Mark; Nordquist, Christopher D.; Cich, Michael J.

    2012-09-25

    A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

  5. Bayesian Integrated Microbial Forensics

    SciTech Connect

    Jarman, Kristin H.; Kreuzer-Martin, Helen W.; Wunschel, David S.; Valentine, Nancy B.; Cliff, John B.; Petersen, Catherine E.; Colburn, Heather A.; Wahl, Karen L.

    2008-06-01

    In the aftermath of the 2001 anthrax letters, researchers have been exploring ways to predict the production environment of unknown source microorganisms. Different mass spectral techniques are being developed to characterize components of a microbe’s culture medium including water, carbon and nitrogen sources, metal ions added, and the presence of agar. Individually, each technique has the potential to identify one or two ingredients in a culture medium recipe. However, by integrating data from multiple mass spectral techniques, a more complete characterization is possible. We present a Bayesian statistical approach to integrated microbial forensics and illustrate its application on spores grown in different culture media.

  6. Integrated traditional Chinese medicine.

    PubMed

    Robinson, Nicola

    2006-05-01

    To experience the integration of traditional Chinese medicine (TCM) in China was 'the chance of a lifetime; thanks to the support of the Winston Churchill Memorial Trust. The scale and range of TCM available in terms of health care provision, education and research is unique in the world. This holistic integrative medicine is part of Chinese culture. Regulation and training of practitioners has similarities with current structures emerging in the UK in preparation for the statutory regulation for acupuncture and herbal medicine. China's research activity is a critical component of informing the debate on evidence-based practice and now real opportunities for collaboration and dissemination are beginning to emerge. PMID:16648091

  7. Embracing Integrative Multiomics Approaches

    PubMed Central

    2016-01-01

    As “-omics” data technology advances and becomes more readily accessible to address complex biological questions, increasing amount of cross “-omics” dataset is inspiring the use and development of integrative bioinformatics analysis. In the current review, we discuss multiple options for integrating data across “-omes” for a range of study designs. We discuss established methods for such analysis and point the reader to in-depth discussions for the various topics. Additionally, we discuss challenges and new directions in the area.

  8. Two integrable systems with integrals of motion of degree four

    NASA Astrophysics Data System (ADS)

    Tsiganov, A. V.

    2016-03-01

    We discuss the possibility of using second-order Killing tensors to construct Liouville-integrable Hamiltonian systems that are not Nijenhuis integrable. As an example, we consider two Killing tensors with a nonzero Haantjes torsion that satisfy weaker geometric conditions and also three-dimensional systems corresponding to them that are integrable in Euclidean space and have two quadratic integrals of motion and one fourth-order integral in momenta.

  9. Measuring integrated care.

    PubMed

    Strandberg-Larsen, Martin

    2011-02-01

    The positive outcomes of coordination of healthcare services are to an increasing extent becoming clear. However the complexity of the field is an inhibiting factor for vigorously designed trial studies. Conceptual clarity and a consistent theoretical frame-work are thus needed. While researchers respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture the multi-dimensional aspects of integrated healthcare delivery. 2) To assess the level of integration of the Danish healthcare system. 3) To assess the use of joint health plans as a tool for coordination between the regional and local level in the Danish healthcare system. 4) To compare the inputs and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine the associations between specific organizational factors and clinical integration within each system. The literature was systematically searched to identify methods for measurement of integrated healthcare delivery. A national cross-sectional survey was conducted among major professional stake-holders at five different levels of the Danish healthcare system. The survey data were used to allow for analysis of the level of integration achieved. Data from the survey were

  10. Integrity in Student Affairs Organizations

    ERIC Educational Resources Information Center

    Baird, Leonard

    2011-01-01

    "Integrity" is a term that is intuitively appealing, but hard to define and implement. This chapter discusses those conceptual complexities as well as an ideal portrait of organizations with integrity, a description of the challenges to the integrity of organizations, a discussion of the enhancement of integrity through compliance programs and…

  11. An Integrated Model Recontextualized

    ERIC Educational Resources Information Center

    O'Meara, KerryAnn; Saltmarsh, John

    2016-01-01

    In this commentary, authors KerryAnn O'Meara and John Saltmarsh reflect on their 2008 "Journal of Higher Education Outreach and Engagement" article "An Integrated Model for Advancing the Scholarship of Engagement: Creating Academic Homes for the Engaged Scholar," reprinted in this 20th anniversary issue of "Journal of…

  12. The New Integration

    ERIC Educational Resources Information Center

    Kahlenberg, Richard D.

    2006-01-01

    The goal of closing achievement gaps between students of different socioeconomic status and race has eluded public schools for decades. Facing increased pressure from NCLB to reach this goal, some school districts have turned to a new experiment based on an old-fashioned vision: integrating students by socioeconomic income. Kahlenberg reviews the…

  13. Visual integration in autism

    PubMed Central

    Smith, Danielle; Ropar, Danielle; Allen, Harriet A.

    2015-01-01

    Atypical integration is a topic of debate in the autism literature. Some theories suggest that altered perception in autism spectrum disorder (ASD) is due to a failure to integrate information from meaningful context into the final percept, whereas others suggest that integration of low-level features is impaired. Empirical research which forms the basis for these theories has failed to account for higher-level influences not inherent in the stimuli (i.e., instructions and goals) and assess integration at both lower and higher perceptual levels within the same task. Here, we describe how perceived expectations and goals of a task can modulate the processing of low-level visual input via the medial prefrontal cortex (mPFC). We then go on to illustrate how future research might assess the relative contribution of both low and high-level processes using the same paradigm. We conclude by recommending that when results appear conflicting, consideration of the relative strength of low-level input vs. feedback or high-level processes may prove helpful. Importantly, research in this area needs to more broadly consider the various influences on perception, and find better ways to assess the contributions of early and later visual processes. PMID:26190994

  14. External Cargo Integration Overview

    NASA Technical Reports Server (NTRS)

    Gueera, Alan

    2005-01-01

    This viewgraph presentation reviews the system integration efforts for external cargo for the International Space Station (ISS). The role and responsibility of the External Carriers Ofice is reviewed. The presentation also reviews the application of the office to the Commercial Cargo Services contract.

  15. Integration: Reversing Traditional Pedagogy

    ERIC Educational Resources Information Center

    Yost, David

    2008-01-01

    A derivative is the limit of a quotient. It is an abstraction of division. Since division is harder to understand than multiplication, teachers teach it later, hopefully only after a sound understanding of multiplication has been attained. For the same reason, it may make sense to teach integration first, and move on to differential calculus only…

  16. Integrating Refugee Children.

    ERIC Educational Resources Information Center

    Vershok, Anna

    2003-01-01

    Notes that the Moscow Center for the Integration and Education of Refugee Children attempts to provide real schooling for refugee children displaced from the Chechen Republic. Suggests main task was to prepare the children for regular school, and to help them adapt to both their new school and their new home, Moscow. Hopes this experience may help…

  17. Integrated Pest Management.

    ERIC Educational Resources Information Center

    Council on Environmental Quality, Washington, DC.

    After a brief discussion of the problems of pesticide use and the status of current pest control practices, a definition of integrated pest management is given along with some examples of its successful application, and a description of some of the reasons why the concept has not been applied more widely. The major techniques which can be used as…

  18. Education and European Integration.

    ERIC Educational Resources Information Center

    Lowe, John

    1992-01-01

    Reviews implications for education and training of the movement toward integration among European Community nations and the end of Communist governments. Discusses common concerns for new Europe, including data sharing, teacher training, educational quality, disadvantaged learners, demographic and employment trends, European Studies curricula, and…

  19. SALAD helicopter integrated sensor

    SciTech Connect

    Soo Hoo, M.S.

    1988-08-01

    The theory and operation of an integrated acoustic and seismic sensor for use with the SALAD helicopter detection system is presented. This sensor incorporates a microphone, geophone, acoustic preamplifier, and tamper indicating features in a buryable, compact aluminum package. This sensor is intended for deployment within a pre-selected, controlled media.

  20. Explorations in Integrated Science

    ERIC Educational Resources Information Center

    Lega, Joceline C.; Buxner, Sanlyn; Blonder, Benjamin; Tama, Florence

    2014-01-01

    We describe a third-year undergraduate course that focuses on multiscale modeling and protein folding and has as its primary goal the encouragement of students to integrate thinking across and beyond disciplinary boundaries. The ability to perform innovative and successful research work in STEM (science, technology, engineering, and mathematics)…

  1. Integrated Learning Management Systems

    ERIC Educational Resources Information Center

    Clark, Sharon; Cossarin, Mary; Doxsee, Harry; Schwartz, Linda

    2004-01-01

    Four integrated learning management packages were reviewed: "CentraOne", "IntraLearn", "Lyceum", and "Silicon Chalk". These products provide different combinations of synchronous and asynchronous tools. The current report examines the products in relation to their specific value for distance educators and students.

  2. Integrated Leisure and Recreation.

    ERIC Educational Resources Information Center

    Schleien, Stuart, Ed.; Rynders, John, Ed.

    1989-01-01

    This "feature issue" focuses on integrated leisure and recreation for developmentally disabled persons and includes descriptions of innovative leisure/recreation programs which allow the realization of the concepts of normalization and least restrictive environment. Brief articles include the following titles and authors: "Challenging the…

  3. The Integral Fast Reactor

    SciTech Connect

    Till, C.E.; Chang, Y.I. ); Lineberry, M.J. )

    1990-01-01

    Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 5 refs., 3 figs.

  4. 3 CFR - Scientific Integrity

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Departments and Agencies Science and the scientific process must inform and guide decisions of my..., and protection of national security. The public must be able to trust the science and scientific..., and integrity. By this memorandum, I assign to the Director of the Office of Science and...

  5. Integrated Language Arts Curriculum.

    ERIC Educational Resources Information Center

    Keating-Toro, Ann V.

    This paper responds to the fact that in some schools reading, grammar, literature, and vocabulary are still taught separately, despite instructions and staff development which suggest use of an integrated method. The paper first synthesizes research and field-based data, and then offers practical applications of activities which coordinate the…

  6. An Integrated Mural Project

    ERIC Educational Resources Information Center

    Chilman, Karen

    2004-01-01

    The author of this article is an art teacher at William H. English Middle School in Scottsburg, Indiana. She and the science teacher, decided they wanted their units on integration and teaching responsibility to the environment to mesh and create a lasting memory for students. The science component consisted of an ecology unit that led students to…

  7. Integrated Play Groups

    ERIC Educational Resources Information Center

    Glovak, Sandra

    2007-01-01

    As an occupational therapist running social play groups with sensory integration for children on the autism spectrum, the author frequently doubted the wisdom of combining several children on the spectrum into a group. In fact, as the owner of a clinic she said, "No more!" The groups seemed like a waste of parents' time and money, and she refused…

  8. The Integrated Medical Model

    NASA Technical Reports Server (NTRS)

    Butler, Douglas J.; Kerstman, Eric

    2010-01-01

    This slide presentation reviews the goals and approach for the Integrated Medical Model (IMM). The IMM is a software decision support tool that forecasts medical events during spaceflight and optimizes medical systems during simulations. It includes information on the software capabilities, program stakeholders, use history, and the software logic.

  9. THE GOALS OF INTEGRATION.

    ERIC Educational Resources Information Center

    HANDLIN, OSCAR

    THE LACK OF CLEARLY DEFINED GOALS WITHIN THE CIVIL RIGHTS MOVEMENT IS IMPEDING ITS TACTICS AND MOMENTUM. THE STATED GOAL OF INTEGRATION ACTUALLY HAS TWO ALTERNATIVE INTERPRETATIONS--FULL LEGAL EQUALITY AND RACIAL BALANCE. THE NEWER STRESS ON RACIAL BALANCE RESTS ON THE FALLACIOUS ASSUMPTIONS THAT THE NEGRO'S SITUATION IS UNIQUE BECAUSE OF SLAVERY…

  10. Biochemical Platform Processing Integration

    SciTech Connect

    2006-06-01

    The objective of this project is to facilitate deployment of enzyme-based biomass conversion technology. The immediate goal is to explore integration issues that impact process performance and to demonstrate improved performance of the lower-cost enzymes being developed by Genencor and Novozymes.

  11. Data Integrity: Backup

    ERIC Educational Resources Information Center

    Bergren, Martha Dewey

    2005-01-01

    School nurses and health office staff have an ethical and legal obligation to protect the integrity of electronic student health records. Various sources, both accidental and malicious, can threaten student health data. School nurses must employ regular and reliable methods to back up student health data.

  12. Integrated circuit reliability testing

    NASA Technical Reports Server (NTRS)

    Buehler, Martin G. (Inventor); Sayah, Hoshyar R. (Inventor)

    1990-01-01

    A technique is described for use in determining the reliability of microscopic conductors deposited on an uneven surface of an integrated circuit device. A wafer containing integrated circuit chips is formed with a test area having regions of different heights. At the time the conductors are formed on the chip areas of the wafer, an elongated serpentine assay conductor is deposited on the test area so the assay conductor extends over multiple steps between regions of different heights. Also, a first test conductor is deposited in the test area upon a uniform region of first height, and a second test conductor is deposited in the test area upon a uniform region of second height. The occurrence of high resistances at the steps between regions of different height is indicated by deriving the measured length of the serpentine conductor using the resistance measured between the ends of the serpentine conductor, and comparing that to the design length of the serpentine conductor. The percentage by which the measured length exceeds the design length, at which the integrated circuit will be discarded, depends on the required reliability of the integrated circuit.

  13. Integrated circuit reliability testing

    NASA Technical Reports Server (NTRS)

    Buehler, Martin G. (Inventor); Sayah, Hoshyar R. (Inventor)

    1988-01-01

    A technique is described for use in determining the reliability of microscopic conductors deposited on an uneven surface of an integrated circuit device. A wafer containing integrated circuit chips is formed with a test area having regions of different heights. At the time the conductors are formed on the chip areas of the wafer, an elongated serpentine assay conductor is deposited on the test area so the assay conductor extends over multiple steps between regions of different heights. Also, a first test conductor is deposited in the test area upon a uniform region of first height, and a second test conductor is deposited in the test area upon a uniform region of second height. The occurrence of high resistances at the steps between regions of different height is indicated by deriving the measured length of the serpentine conductor using the resistance measured between the ends of the serpentine conductor, and comparing that to the design length of the serpentine conductor. The percentage by which the measured length exceeds the design length, at which the integrated circuit will be discarded, depends on the required reliability of the integrated circuit.

  14. Integrating Curriculum through Themes

    ERIC Educational Resources Information Center

    Horton, Robert M.; Hedetniemi, Traci; Wiegert, Elaine; Wagner, John R.

    2006-01-01

    This article looks at a strategy that integrates eighth-grade mathematics, science, history, and English through thematic study. Each of the themes used in the South Carolina Studies project focuses on a particular landform region within the state. (Contains 3 figures.)

  15. Astrophysics: An Integrative Course

    ERIC Educational Resources Information Center

    Gutsche, Graham D.

    1975-01-01

    Describes a one semester course in introductory stellar astrophysics at the advanced undergraduate level. The course aims to integrate all previously learned physics by applying it to the study of stars. After a brief introductory section on basic astronomical measurements, the main topics covered are stellar atmospheres, stellar structure, and…

  16. Chewing Over Physiology Integration

    ERIC Educational Resources Information Center

    Abdulkader, Fernando; Azevedo-Martins, Anna Karenina; de Arcisio Miranda, Manoel; Brunaldi, Kellen

    2005-01-01

    An important challenge for both students and teachers of physiology is to integrate the differentareas in which physiological knowledge is didactically divided. In developing countries, such an issue is even more demanding, because budget restrictions often affect the physiology program with laboratory classes being the first on the list when it…

  17. Integrity in HRD.

    ERIC Educational Resources Information Center

    1997

    This document contains four papers from a symposium on integrity in human resource development (HRD). "The Effects of Blame Attributions and Justice Violations on Revenge and Forgiveness in the Workplace" (Murray O. Bradfield, Karl Aquino, Doug Stanwyck) describes a test of a mediated model, postulating that thoughts of revenge mediated…

  18. Educational Technology: Integration?

    ERIC Educational Resources Information Center

    Christensen, Dean L.; Tennyson, Robert D.

    This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

  19. Integration: An Elusive Concept

    ERIC Educational Resources Information Center

    George, Beena; Delcoure, Natalya

    2012-01-01

    The need for multi-disciplinary integration in business school education has been well-established. However, academics and business practitioners have raised serious concerns regarding the achievement of this program learning goal. This paper examines how graduate business programs address and evaluate the learning goal of multi-disciplinary…

  20. Integration of Technology.

    ERIC Educational Resources Information Center

    Hamelink, Jack M.

    1984-01-01

    Outlines six characteristics that the successful factory of tomorrow must possess and discusses four phases of change that are generally recognized in the integration process--awareness, acceptance, participation, and ownership. Ten change principles that can be addressed through education to reduce resistance to technological innovation are…

  1. The Integrity of Research

    ERIC Educational Resources Information Center

    Axman, Linnea; Boren, Denise

    2010-01-01

    This text is the foundation from which a distinguished lecture was developed focusing on the necessity for research in healthcare carried out with attention to issues of integrity, the hallmark of all commendable research. A cautionary historical review of research misconduct and related topics is provided. Research within a cultural context and…

  2. Integrative Studies (IGS).

    ERIC Educational Resources Information Center

    Ciholas, Paul

    The Kentucky State University Integrative Studies Program, which is described in this report, consists of seven seminar-type models, three in the Western and four in the non-Western traditions. It is a basic component of a 53-hour core curriculum, and requires both faculty and students to analyze and interpret a body of knowledge involving…

  3. An Integrated Learning Experience.

    ERIC Educational Resources Information Center

    Armstrong, Jackie; Landi, Kristina

    1990-01-01

    Describes a fifth grade social studies unit on ancient civilizations that includes a comprehensive history of ancient Egypt, Rome, and Greece and integrates studio art, art history, library science, social studies, and computer literacy programs. Students utilize the library to do research and develop an oral presentation while also working on…

  4. The integrated phenotype.

    PubMed

    Murren, Courtney J

    2012-07-01

    Proper functioning of complex phenotypes requires that multiple traits work together. Examination of relationships among traits within and between complex characters and how they interact to function as a whole organism is critical to advancing our understanding of evolutionary developmental plasticity. Phenotypic integration refers to the relationships among multiple characters of a complex phenotype, and their relationships with other functional units (modules) in an organism. In this review, I summarize a brief history of the concept of phenotypic integration in plant and animal biology. Following an introduction of concepts, including modularity, I use an empirical case-study approach to highlight recent advance in clarifying the developmental and genomic basis of integration. I end by highlighting some novel approaches to genomic and epigenetic perturbations that offer promise in further addressing the role of phenotypic integration in evolutionary diversification. In the age of the phenotype, studies that examine the genomic and developmental changes in relationships of traits across environments will shape the next chapter in our quest for understanding the evolution of complex characters.

  5. Bioluminescent bioreporter integrated circuit

    DOEpatents

    Simpson, Michael L.; Sayler, Gary S.; Paulus, Michael J.

    2000-01-01

    Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

  6. Approximating Integrals Using Probability

    ERIC Educational Resources Information Center

    Maruszewski, Richard F., Jr.; Caudle, Kyle A.

    2005-01-01

    As part of a discussion on Monte Carlo methods, which outlines how to use probability expectations to approximate the value of a definite integral. The purpose of this paper is to elaborate on this technique and then to show several examples using visual basic as a programming tool. It is an interesting method because it combines two branches of…

  7. Integrating Spirituality Into Work

    ERIC Educational Resources Information Center

    Wax, Seth

    2008-01-01

    School leaders do work that is both demanding and draining. Amid the day-to-day pressures of managing their school districts, many are seeking inspiration and deeper meaning. As a result, some are increasingly looking to integrate their spirituality and their work. In this article, the author describes three individuals interviewed as part of the…

  8. Integrated Salt Studies

    NASA Astrophysics Data System (ADS)

    Urai, Janos L.; Kukla, Peter A.

    2015-04-01

    The growing importance of salt in the energy, subsurface storage, and chemical and food industries also increases the challenges with prediction of geometries, kinematics, stress and transport in salt. This requires an approach, which integrates a broader range of knowledge than is traditionally available in the different scientific and engineering disciplines. We aim to provide a starting point for a more integrated understanding of salt, by presenting an overview of the state of the art in a wide range of salt-related topics, from (i) the formation and metamorphism of evaporites, (ii) rheology and transport properties, (iii) salt tectonics and basin evolution, (iv) internal structure of evaporites, (v) fluid flow through salt, to (vi) salt engineering. With selected case studies we show how integration of these domains of knowledge can bring better predictions of (i) sediment architecture and reservoir distribution, (ii) internal structure of salt for optimized drilling and better cavern design, (iii) reliable long-term predictions of deformations and fluid flow in subsurface storage. A fully integrated workflow is based on geomechanical models, which include all laboratory and natural observations and links macro- and micro-scale studies. We present emerging concepts for (i) the initiation dynamics of halokinesis, (ii) the rheology and deformation of the evaporites by brittle and ductile processes, (iii) the coupling of processes in evaporites and the under- and overburden, and (iv) the impact of the layered evaporite rheology on the structural evolution.

  9. GEOSS Water Cycle Integrator

    NASA Astrophysics Data System (ADS)

    Koike, Toshio; Lawford, Richard; Cripe, Douglas

    2013-04-01

    It is critically important to recognize and co-manage the fundamental linkages across the water-dependent domains; land use, including deforestation; ecosystem services; and food-, energy- and health-securities. Sharing coordinated, comprehensive and sustained observations and information for sound decision-making is a first step; however, to take full advantage of these opportunities, we need to develop an effective collaboration mechanism for working together across different disciplines, sectors and agencies, and thereby gain a holistic view of the continuity between environmentally sustainable development, climate change adaptation and enhanced resilience. To promote effective multi-sectoral, interdisciplinary collaboration based on coordinated and integrated efforts, the intergovernmental Group on Earth Observations (GEO) is implementing the Global Earth Observation System of Systems (GEOSS). A component of GEOSS now under development is the "GEOSS Water Cycle Integrator (WCI)", which integrates Earth observations, modeling, data and information, management systems and education systems. GEOSS/WCI sets up "work benches" by which partners can share data, information and applications in an interoperable way, exchange knowledge and experiences, deepen mutual understanding and work together effectively to ultimately respond to issues of both mitigation and adaptation. (A work bench is a virtual geographical or phenomenological space where experts and managers collaborate to use information to address a problem within that space). GEOSS/WCI enhances the coordination of efforts to strengthen individual, institutional and infrastructure capacities, especially for effective interdisciplinary coordination and integration. GEO has established the GEOSS Asian Water Cycle Initiative (AWCI) and GEOSS African Water Cycle Coordination Initiative (AfWCCI). Through regional, inter-disciplinary, multi-sectoral integration and inter-agency coordination in Asia and Africa, GEOSS

  10. GEOSS Water Cycle Integrator

    NASA Astrophysics Data System (ADS)

    Koike, T.; Lawford, R. G.; Cripe, D.

    2012-12-01

    It is critically important to recognize and co-manage the fundamental linkages across the water-dependent domains; land use, including deforestation; ecosystem services; and food-, energy- and health-securities. Sharing coordinated, comprehensive and sustained observations and information for sound decision-making is a first step; however, to take full advantage of these opportunities, we need to develop an effective collaboration mechanism for working together across different disciplines, sectors and agencies, and thereby gain a holistic view of the continuity between environmentally sustainable development, climate change adaptation and enhanced resilience. To promote effective multi-sectoral, interdisciplinary collaboration based on coordinated and integrated efforts, the Global Earth Observation System of Systems (GEOSS) is now developing a "GEOSS Water Cycle Integrator (WCI)", which integrates "Earth observations", "modeling", "data and information", "management systems" and "education systems". GEOSS/WCI sets up "work benches" by which partners can share data, information and applications in an interoperable way, exchange knowledge and experiences, deepen mutual understanding and work together effectively to ultimately respond to issues of both mitigation and adaptation. (A work bench is a virtual geographical or phenomenological space where experts and managers collaborate to use information to address a problem within that space). GEOSS/WCI enhances the coordination of efforts to strengthen individual, institutional and infrastructure capacities, especially for effective interdisciplinary coordination and integration. GEO has established the GEOSS Asian Water Cycle Initiative (AWCI) and GEOSS African Water Cycle Coordination Initiative (AfWCCI). Through regional, inter-disciplinary, multi-sectoral integration and inter-agency coordination in Asia and Africa, GEOSS/WCI is now leading to effective actions and public awareness in support of water security and

  11. Heat Pipe Integrated Microsystems

    SciTech Connect

    Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

    1999-03-30

    The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached to

  12. Choosing the Right Systems Integration

    NASA Astrophysics Data System (ADS)

    Péči, Matúš; Važan, Pavel

    2014-12-01

    The paper examines systems integration and its main levels at higher levels of control. At present, the systems integration is one of the main aspects participating in the consolidation processes and financial flows of a company. Systems Integration is a complicated emotionconsuming process and it is often a problem to choose the right approach and level of integration. The research focused on four levels of integration, while each of them is characterized by specific conditions. At each level, there is a summary of recommendations and practical experience. The paper also discusses systems integration between the information and MES levels. The main part includes user-level integration where we describe an example of such integration. Finally, we list recommendations and also possible predictions of the systems integration as one of the important factors in the future.

  13. JWST pathfinder telescope integration

    NASA Astrophysics Data System (ADS)

    Matthews, Gary W.; Kennard, Scott H.; Broccolo, Ronald T.; Ellis, James M.; Daly, Elizabeth A.; Hahn, Walter G.; Amon, John N.; Mt. Pleasant, Stephen M.; Texter, Scott; Atkinson, Charles B.; McKay, Andrew; Levi, Joshua; Keski-Kuha, Ritva; Feinberg, Lee

    2015-08-01

    The James Webb Space Telescope (JWST) is a 6.5m, segmented, IR telescope that will explore the first light of the universe after the big bang. In 2014, a major risk reduction effort related to the Alignment, Integration, and Test (AI and T) of the segmented telescope was completed. The Pathfinder telescope includes two Primary Mirror Segment Assemblies (PMSA's) and the Secondary Mirror Assembly (SMA) onto a flight-like composite telescope backplane. This pathfinder allowed the JWST team to assess the alignment process and to better understand the various error sources that need to be accommodated in the flight build. The successful completion of the Pathfinder Telescope provides a final integration roadmap for the flight operations that will start in August 2015.

  14. Integrated thruster assembly program

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The program is reported which has provided technology for a long life, high performing, integrated ACPS thruster assembly suitable for use in 100 typical flights of a space shuttle vehicle over a ten year period. The four integrated thruster assemblies (ITA) fabricated consisted of: propellant injector; a capacitive discharge, air gap torch type igniter assembly; fast response igniter and main propellant valves; and a combined regen-dump film cooled chamber. These flightweight 6672 N (1500 lb) thruster assemblies employed GH2/GO2 as propellants at a chamber pressure of 207 N/sq cm (300 psia). Test data were obtained on thrusted performance, thermal and hydraulic characteristics, dynamic response in pulsing, and cycle life. One thruster was fired in excess of 42,000 times.

  15. Computer integrated laboratory testing

    NASA Technical Reports Server (NTRS)

    Dahl, Charles C.

    1992-01-01

    The objective is the integration of computers into the Engineering Materials Science Laboratory course, where existing test equipment is not computerized. The first lab procedure is to demonstrate and produce a material phase change curve. The second procedure is a demonstration of the modulus of elasticity and related stress-strain curve, plastic performance, maximum and failure strength. The process of recording data by sensors that are connected to a data logger which adds a time base, and the data logger in turn connected to a computer, places the materials labs into a computer integrated mode with minimum expense and maximum flexibility. The sensor signals are input into a spread sheet for tabular records, curve generation, and graph printing.

  16. Nonlinear integrable ion traps

    SciTech Connect

    Nagaitsev, S.; Danilov, V.; /SNS Project, Oak Ridge

    2011-10-01

    Quadrupole ion traps can be transformed into nonlinear traps with integrable motion by adding special electrostatic potentials. This can be done with both stationary potentials (electrostatic plus a uniform magnetic field) and with time-dependent electric potentials. These potentials are chosen such that the single particle Hamilton-Jacobi equations of motion are separable in some coordinate systems. The electrostatic potentials have several free adjustable parameters allowing for a quadrupole trap to be transformed into, for example, a double-well or a toroidal-well system. The particle motion remains regular, non-chaotic, integrable in quadratures, and stable for a wide range of parameters. We present two examples of how to realize such a system in case of a time-independent (the Penning trap) as well as a time-dependent (the Paul trap) configuration.

  17. Cell wall integrity

    PubMed Central

    Pogorelko, Gennady; Lionetti, Vincenzo; Bellincampi, Daniela; Zabotina, Olga

    2013-01-01

    The plant cell wall, a dynamic network of polysaccharides and glycoproteins of significant compositional and structural complexity, functions in plant growth, development and stress responses. In recent years, the existence of plant cell wall integrity (CWI) maintenance mechanisms has been demonstrated, but little is known about the signaling pathways involved, or their components. Examination of key mutants has shed light on the relationships between cell wall remodeling and plant cell responses, indicating a central role for the regulatory network that monitors and controls cell wall performance and integrity. In this review, we present a short overview of cell wall composition and discuss post-synthetic cell wall modification as a valuable approach for studying CWI perception and signaling pathways. PMID:23857352

  18. Scientific integrity memorandum

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2009-03-01

    U.S. President Barack Obama signed a presidential memorandum on 9 March to help restore scientific integrity in government decision making. The memorandum directs the White House Office of Science and Technology Policy to develop a strategy within 120 days that ensures that "the selection of scientists and technology professionals for science and technology positions in the executive branch is based on those individuals' scientific and technological knowledge, credentials, and experience; agencies make available to the public the scientific or technological findings or conclusions considered or relied upon in policy decisions; agencies use scientific and technological information that has been subject to well-established scientific processes such as peer review; and agencies have appropriate rules and procedures to ensure the integrity of the scientific process within the agency, including whistleblower protection."

  19. Anatomy of Data Integration

    PubMed Central

    Brazhnik, Olga; Jones, John F.

    2007-01-01

    Producing reliable information is the ultimate goal of data processing. The ocean of data created with the advances of science and technologies calls for integration of data coming from heterogeneous sources that are diverse in their purposes, business rules, underlying models and enabling technologies. Reference models, Semantic Web, standards, ontology, and other technologies enable fast and efficient merging of heterogeneous data, while the reliability of produced information is largely defined by how well the data represent the reality. In this paper we initiate a framework for assessing the informational value of data that includes data dimensions; aligning data quality with business practices; identifying authoritative sources and integration keys; merging models; uniting updates of varying frequency and overlapping or gapped data sets. PMID:17071142

  20. The INTEGRAL scatterometer SPI

    NASA Technical Reports Server (NTRS)

    Mandrou, P.; Vedrenne, G.; Jean, P.; Kandel, B.; vonBallmoos, P.; Albernhe, F.; Lichti, G.; Schoenfelder, V.; Diehl, R.; Georgii, R.; Teegarden, B.; Mandrou, P.; Vedrenne, G.; Kirchner, T.; Durouchoux, P.; Cordier, B.; Diallo, N.; Sanchez, F.; Payne, B.; Leleux, P.; Caraveo, P.; Matteson, J.; Slassi-Sennon, S.; Lin, R. P.; Skinner, G.

    1997-01-01

    The INTErnational Gamma Ray Astrophysics Laboratory (INTEGRAL) mission's onboard spectrometer, the INTEGRAL spectrometer (SPI), is described. The SPI constitutes one of the four main mission instruments. It is optimized for detailed measurements of gamma ray lines and for the mapping of diffuse sources. It combines a coded aperture mask with an array of large volume, high purity germanium detectors. The detectors make precise measurements of the gamma ray energies over the 20 keV to 8 MeV range. The instrument's characteristics are described and the Monte Carlo simulation of its performance is outlined. It will be possible to study gamma ray emission from compact objects or line profiles with a high energy resolution and a high angular resolution.

  1. Maximal Transcendentality and Integrability

    NASA Astrophysics Data System (ADS)

    Lipatov, L. N.

    2008-09-01

    The Hamiltonian describing possible interactions of the Reggeized gluons in the leading logarithmic approximation (LLA) of the multicolor QCD has the properties of conformal invariance, holomorphic separability and duality. It coincides with the Hamiltonian of the integrable Heisenberg model with the spins being the Möbius group generators. With the use of the Baxter-Sklyanin representation we calculate intercepts of the colorless states constructed from three and four Reggeized gluons and anomalous dimensions of the corresponding high twist operators. The integrability properties of the BFKL equation at a finite temperature are reviewed. Maximal transcendentality is used to construct anomalous dimensions of twist-2 operators up to 4 loops. It is shown that the asymptotic Bethe Ansatz in the 4-loop approximation is not in an agreement with predictions of the BFKL equation in N=4 SUSY.

  2. Contour integration with corners.

    PubMed

    Persike, Malte; Meinhardt, Günter

    2016-10-01

    Contour integration refers to the ability of the visual system to bind disjoint local elements into coherent global shapes. In cluttered images containing randomly oriented elements a contour becomes salient when its elements are coaligned with a smooth global trajectory, as described by the Gestalt law of good continuation. Abrupt changes of curvature strongly diminish contour salience. Here we show that by inserting local corner elements at points of angular discontinuity, a jagged contour becomes as salient as a straight one. We report results from detection experiments for contours with and without corner elements which indicate their psychophysical equivalence. This presents a challenge to the notion that contour integration mostly relies on local interactions between neurons tuned to single orientations, and suggests that a site where single orientations and more complex local features are combined constitutes the early basis of contour and 2D shape processing.

  3. INTEGRAL burst alert service

    NASA Technical Reports Server (NTRS)

    Pedersen, H.; Jennings, D.; Mereghetti, S.; Teegarden, B.

    1997-01-01

    The detection, accurate positioning, and spectral analysis of cosmic gamma ray bursts is an objective of the International Gamma Ray Astrophysics Laboratory (INTEGRAL) mission. Due to their unpredictable nature, gamma ray bursts can only be observed in serendipity mode. In order to allow and promote multiwavelength follow-up observations of such events, it is desirable to make the information available to the astrophysics community with a minimum delay through the use of Internet. Ideally, the data dissemination should occur within a few seconds of the start of the burst event so that follow up observations can proceed while gamma rays are still being emitted. The technical feasibility of building such a system to disseminate INTEGRAL burst alerts in real time is currently under consideration, the preliminary results of which are presented. It is concluded that such an alert service is technically feasible.

  4. JWST Pathfinder Telescope Integration

    NASA Technical Reports Server (NTRS)

    Matthews, Gary W.; Kennard, Scott H.; Broccolo, Ronald T.; Ellis, James M.; Daly, Elizabeth A.; Hahn, Walter G.; Amon, John N.; Mt. Pleasant, Stephen M.; Texter, Scott; Atkinson, Charles B.; McKay, Andrew; Levi, Joshua; Keski-Kuha, Ritva; Feinberg, Lee

    2015-01-01

    The James Webb Space Telescope (JWST) is a 6.5m, segmented, IR telescope that will explore the first light of the universe after the big bang. In 2014, a major risk reduction effort related to the Alignment, Integration, and Test (AI&T) of the segmented telescope was completed. The Pathfinder telescope includes two Primary Mirror Segment Assemblies (PMSA's) and the Secondary Mirror Assembly (SMA) onto a flight-like composite telescope backplane. This pathfinder allowed the JWST team to assess the alignment process and to better understand the various error sources that need to be accommodated in the flight build. The successful completion of the Pathfinder Telescope provides a final integration roadmap for the flight operations that will start in August 2015.

  5. Integrated elastic microscope device

    NASA Astrophysics Data System (ADS)

    Lee, W. M.; Wright, D.; Watkins, R.; Cen, Zi

    2015-03-01

    The growing power of imaging and computing power of smartphones is creating the possibility of converting your smartphone into a high power pocket microscopy system. High quality miniature microscopy lenses attached to smartphone are typically made with glass or plastics that can only be produce at low cost with high volume. To revise the paradigm of microscope lenses, we devised a simple droplet lens fabrication technique that which produces low cost and high performance lens. Each lens is integrated into thin 3-D printed holder with complimentary light emitted diode (LEDs) that clips onto majority of smartphones. The integrated device converts a smartphone into a high power optical microscope/dermatoscope at around $2. This low cost device has wide application in a multitude of practical uses such as material inspection, dermascope and educational microscope.

  6. Integrated turbomachine oxygen plant

    DOEpatents

    Anand, Ashok Kumar; DePuy, Richard Anthony; Muthaiah, Veerappan

    2014-06-17

    An integrated turbomachine oxygen plant includes a turbomachine and an air separation unit. One or more compressor pathways flow compressed air from a compressor through one or more of a combustor and a turbine expander to cool the combustor and/or the turbine expander. An air separation unit is operably connected to the one or more compressor pathways and is configured to separate the compressed air into oxygen and oxygen-depleted air. A method of air separation in an integrated turbomachine oxygen plant includes compressing a flow of air in a compressor of a turbomachine. The compressed flow of air is flowed through one or more of a combustor and a turbine expander of the turbomachine to cool the combustor and/or the turbine expander. The compressed flow of air is directed to an air separation unit and is separated into oxygen and oxygen-depleted air.

  7. Integrating function and mechanism.

    PubMed

    McNamara, John M; Houston, Alasdair I

    2009-12-01

    Behavioural ecology often makes the assumption that animals can respond flexibly by adopting the optimal behaviour for each circumstance. However, as ethologists have long known, behaviour is determined by mechanisms that are not optimal in every circumstance. As we discuss here, we believe that it is necessary to integrate these separate traditions by considering the evolution of mechanisms, an approach referred to as 'Evo-mecho'. This integration is timely because there is a growing awareness of the importance of environmental complexity in shaping behaviour; there are established and effective computational procedures for simulating evolution and there is rapidly increasing knowledge of the neuronal basis of decision-making. Although behavioural ecologists have built complex models of optimal behaviour in simple environments, we argue that they need to focus on simple mechanisms that perform well in complex environments.

  8. Integrated Multidisciplinary Optimization Objects

    NASA Technical Reports Server (NTRS)

    Alston, Katherine

    2014-01-01

    OpenMDAO is an open-source MDAO framework. It is used to develop an integrated analysis and design environment for engineering challenges. This Phase II project integrated additional modules and design tools into OpenMDAO to perform discipline-specific analysis across multiple flight regimes at varying levels of fidelity. It also showcased a refined system architecture that allows the system to be less customized to a specific configuration (i.e., system and configuration separation). By delivering a capable and validated MDAO system along with a set of example applications to be used as a template for future users, this work greatly expands NASA's high-fidelity, physics-based MDAO capabilities and enables the design of revolutionary vehicles in a cost-effective manner. This proposed work complements M4 Engineering's expertise in developing modeling and simulation toolsets that solve relevant subsonic, supersonic, and hypersonic demonstration applications.

  9. Anatomy of data integration.

    PubMed

    Brazhnik, Olga; Jones, John F

    2007-06-01

    Producing reliable information is the ultimate goal of data processing. The ocean of data created with the advances of science and technologies calls for integration of data coming from heterogeneous sources that are diverse in their purposes, business rules, underlying models and enabling technologies. Reference models, Semantic Web, standards, ontology, and other technologies enable fast and efficient merging of heterogeneous data, while the reliability of produced information is largely defined by how well the data represent the reality. In this paper, we initiate a framework for assessing the informational value of data that includes data dimensions; aligning data quality with business practices; identifying authoritative sources and integration keys; merging models; uniting updates of varying frequency and overlapping or gapped data sets.

  10. Contour integration with corners.

    PubMed

    Persike, Malte; Meinhardt, Günter

    2016-10-01

    Contour integration refers to the ability of the visual system to bind disjoint local elements into coherent global shapes. In cluttered images containing randomly oriented elements a contour becomes salient when its elements are coaligned with a smooth global trajectory, as described by the Gestalt law of good continuation. Abrupt changes of curvature strongly diminish contour salience. Here we show that by inserting local corner elements at points of angular discontinuity, a jagged contour becomes as salient as a straight one. We report results from detection experiments for contours with and without corner elements which indicate their psychophysical equivalence. This presents a challenge to the notion that contour integration mostly relies on local interactions between neurons tuned to single orientations, and suggests that a site where single orientations and more complex local features are combined constitutes the early basis of contour and 2D shape processing. PMID:27542687

  11. Integrated Circuit Immunity

    NASA Technical Reports Server (NTRS)

    Sketoe, J. G.; Clark, Anthony

    2000-01-01

    This paper presents a DOD E3 program overview on integrated circuit immunity. The topics include: 1) EMI Immunity Testing; 2) Threshold Definition; 3) Bias Tee Function; 4) Bias Tee Calibration Set-Up; 5) EDM Test Figure; 6) EMI Immunity Levels; 7) NAND vs. and Gate Immunity; 8) TTL vs. LS Immunity Levels; 9) TP vs. OC Immunity Levels; 10) 7805 Volt Reg Immunity; and 11) Seventies Chip Set. This paper is presented in viewgraph form.

  12. Integrated mobile robot control

    NASA Technical Reports Server (NTRS)

    Amidi, Omead; Thorpe, Charles

    1991-01-01

    This paper describes the structure, implementation, and operation of a real-time mobile robot controller which integrates capabilities such as: position estimation, path specification and tracking, human interfaces, fast communication, and multiple client support. The benefits of such high-level capabilities in a low-level controller was shown by its implementation for the Navlab autonomous vehicle. In addition, performance results from positioning and tracking systems are reported and analyzed.

  13. Monolithic Optoelectronic Integrated Circuit

    NASA Technical Reports Server (NTRS)

    Bhasin, Kul B.; Walters, Wayne; Gustafsen, Jerry; Bendett, Mark

    1990-01-01

    Monolithic optoelectronic integrated circuit (OEIC) receives single digitally modulated input light signal via optical fiber and converts it into 16-channel electrical output signal. Potentially useful in any system in which digital data must be transmitted serially at high rates, then decoded into and used in parallel format at destination. Applications include transmission and decoding of control signals to phase shifters in phased-array antennas and also communication of data between computers and peripheral equipment in local-area networks.

  14. Non-holonomic integrators

    NASA Astrophysics Data System (ADS)

    Cortés, J.; Martínez, S.

    2001-09-01

    We introduce a discretization of the Lagrange-d'Alembert principle for Lagrangian systems with non-holonomic constraints, which allows us to construct numerical integrators that approximate the continuous flow. We study the geometric invariance properties of the discrete flow which provide an explanation for the good performance of the proposed method. This is tested on two examples: a non-holonomic particle with a quadratic potential and a mobile robot with fixed orientation.

  15. Integrated power passives

    NASA Technical Reports Server (NTRS)

    Xie, Huikai (Inventor); Ngo, Khai D. T. (Inventor)

    2013-01-01

    A multi-layer film-stack and method for forming the multilayer film-stack is given where a series of alternating layers of conducting and dielectric materials are deposited such that the conducting layers can be selectively addressed. The use of the method to form integratable high capacitance density capacitors and complete the formation of an integrated power system-on-a-chip device including transistors, conductors, inductors, and capacitors is also given.

  16. FRAPCON-3: Integral assessment

    SciTech Connect

    Lanning, D.D.; Berna, G.A.; Berna, G.A.

    1997-12-01

    An integral assessment has been performed for the U.S. Nuclear Regulatory Commission by Pacific Northwest National Laboratory to quantify the predictive capabilities of FRAPCON-3, a steady-state fuel behavior code designed to analyze fuel behavior from beginning-of-life to burnup levels of 65 GWd/MTU. FRAPCON-3 code calculations are shown to compare satisfactorily to a pre-selected set of experimental data with steady-state operating conditions. 30 refs., 27 figs., 18 tabs.

  17. PROBABILISTIC INFORMATION INTEGRATION TECHNOLOGY

    SciTech Connect

    J. BOOKER; M. MEYER; ET AL

    2001-02-01

    The Statistical Sciences Group at Los Alamos has successfully developed a structured, probabilistic, quantitative approach for the evaluation of system performance based on multiple information sources, called Information Integration Technology (IIT). The technology integrates diverse types and sources of data and information (both quantitative and qualitative), and their associated uncertainties, to develop distributions for performance metrics, such as reliability. Applications include predicting complex system performance, where test data are lacking or expensive to obtain, through the integration of expert judgment, historical data, computer/simulation model predictions, and any relevant test/experimental data. The technology is particularly well suited for tracking estimated system performance for systems under change (e.g. development, aging), and can be used at any time during product development, including concept and early design phases, prior to prototyping, testing, or production, and before costly design decisions are made. Techniques from various disciplines (e.g., state-of-the-art expert elicitation, statistical and reliability analysis, design engineering, physics modeling, and knowledge management) are merged and modified to develop formal methods for the data/information integration. The power of this technology, known as PREDICT (Performance and Reliability Evaluation with Diverse Information Combination and Tracking), won a 1999 R and D 100 Award (Meyer, Booker, Bement, Kerscher, 1999). Specifically the PREDICT application is a formal, multidisciplinary process for estimating the performance of a product when test data are sparse or nonexistent. The acronym indicates the purpose of the methodology: to evaluate the performance or reliability of a product/system by combining all available (often diverse) sources of information and then tracking that performance as the product undergoes changes.

  18. Integrated and interprofessional care

    PubMed Central

    Barr, Hugh

    2012-01-01

    No wonder two movements described in such similar terms are so often confused. One strives to knit services together, the other to cultivate collaborative practice amongst their workers. Dedicated though both of them are to the improvement of health and social care, integrated care falters without engaging the workforce actively as partners in change whilst interprofessional care falters without organisational support. Neither stands alone. Each depends on the other. PMID:23593049

  19. Integrated Safety Analysis Teams

    NASA Technical Reports Server (NTRS)

    Wetherholt, Jonathan C.

    2008-01-01

    Today's complex systems require understanding beyond one person s capability to comprehend. Each system requires a team to divide the system into understandable subsystems which can then be analyzed with an Integrated Hazard Analysis. The team must have both specific experiences and diversity of experience. Safety experience and system understanding are not always manifested in one individual. Group dynamics make the difference between success and failure as well as the difference between a difficult task and a rewarding experience. There are examples in the news which demonstrate the need to connect the pieces of a system into a complete picture. The Columbia disaster is now a standard example of a low consequence hazard in one part of the system; the External Tank is a catastrophic hazard cause for a companion subsystem, the Space Shuttle Orbiter. The interaction between the hardware, the manufacturing process, the handling, and the operations contributed to the problem. Each of these had analysis performed, but who constituted the team which integrated this analysis together? This paper will explore some of the methods used for dividing up a complex system; and how one integration team has analyzed the parts. How this analysis has been documented in one particular launch space vehicle case will also be discussed.

  20. Integrated structural health monitoring.

    SciTech Connect

    Farrar, C. R.

    2001-01-01

    Structural health monitoring is the implementation of a damage detection strategy for aerospace, civil and mechanical engineering infrastructure. Typical damage experienced by this infrastructure might be the development of fatigue cracks, degradation of structural connections, or bearing wear in rotating machinery. The goal of the research effort reported herein is to develop a robust and cost-effective structural health monitoring solution by integrating and extending technologies from various engineering and information technology disciplines. It is the authors opinion that all structural health monitoring systems must be application specific. Therefore, a specific application, monitoring welded moment resisting steel frame connections in structures subjected to seismic excitation, is described along with the motivation for choosing this application. The structural health monitoring solution for this application will integrate structural dynamics, wireless data acquisition, local actuation, micro-electromechanical systems (MEMS) technology, and statistical pattern recognition algorithms. The proposed system is based on an assessment of the deficiencies associated with many current structural health monitoring technologies including past efforts by the authors. This paper provides an example of the integrated approach to structural health monitoring being undertaken at Los Alamos National Laboratory and summarizes progress to date on various aspects of the technology development.

  1. Integration of design information

    NASA Technical Reports Server (NTRS)

    Anderton, G. L.

    1980-01-01

    The overall concepts of the integrated programs for aerospace-vehicle design (IPAD) from the user's viewpoint are discussed. Also a top-level view of what the user requires from such a system is provided, and the interactions between the system and user are described. The four major components discussed are design process; data storage, management and manipulation; user interface; and project management. Although an outgrowth of aerospace production experience, the basic concepts discussed, and especially their emphasis on integration, are considered applicable to all problem solving. Thus, these concepts may offer a broad base for exploitation by industry in general. This is the first in a set of three papers, the other two being Future Integrated Design Process, by D. D. Mayer, and Requirements for Company-Wide Management of Engineering Information, by J. W. Southall. In addition to tying the three together, how project management can be handled in a computing environment and also the user interface needs are discussed in detail.

  2. Integrative Bioengineering Institute

    SciTech Connect

    Eddington, David; Magin,L,Richard; Hetling, John; Cho, Michael

    2009-01-09

    Microfabrication enables many exciting experimental possibilities for medicine and biology that are not attainable through traditional methods. However, in order for microfabricated devices to have an impact they must not only provide a robust solution to a current unmet need, but also be simple enough to seamlessly integrate into standard protocols. Broad dissemination of bioMEMS has been stymied by the common aim of replacing established and well accepted protocols with equally or more complex devices, methods, or materials. The marriage of a complex, difficult to fabricate bioMEMS device with a highly variable biological system is rarely successful. Instead, the design philosophy of my lab aims to leverage a beneficial microscale phenomena (e.g. fast diffusion at the microscale) within a bioMEMS device and adapt to established methods (e.g. multiwell plate cell culture) and demonstrate a new paradigm for the field (adapt instead of replace). In order for the field of bioMEMS to mature beyond novel proof-of-concept demonstrations, researchers must focus on developing systems leveraging these phenomena and integrating into standard labs, which have largely been ignored. Towards this aim, the Integrative Bioengineering Institute has been established.

  3. NASA scientific integrity policy

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    On 16 December, NASA became the latest U.S. federal agency to issue a scientific integrity policy. It was issued less than 10 days after the U.S. National Oceanic and Atmospheric Administration (NOAA) issued its policy on the same topic (see "NOAA issues scientific integrity policy," Eos Trans. AGU, 92(50), 467, doi:10.1029/2011EO500004, 2011). The agency policies respond to earlier White House memos on the topic issued in 2009 and 2010. NASA is the fifth federal department or agency that has finalized a scientific integrity policy; the Department of the Interior and the National Science Foundation also have finalized their policies. As Eos went to press, 13 other policies were in near-final draft form, including those from the departments of Agriculture and Energy; the Environmental Protection Agency and the Department of Labor had indicated that they expected to submit their policies to the White House Office of Science and Technology Policy (OSTP) soon, OSTP director John Holdren wrote in a 21 December note on the office's Web site.

  4. Integrated airframe propulsion control

    NASA Technical Reports Server (NTRS)

    Fennell, R. E.; Black, S. B.

    1982-01-01

    Perturbation equations which describe flight dynamics and engine operation about a given operating point are combined to form an integrated aircraft/propulsion system model. Included in the model are the dependence of aerodynamic coefficients upon atmospheric variables along with the dependence of engine variables upon flight condition and inlet performance. An off-design engine performance model is used to identify interaction parameters in the model. Inclusion of subsystem interaction effects introduces coupling between flight and propulsion variables. To analyze interaction effects on control, consideration is first given to control requirements for separate flight and engine models. For the separate airframe model, feedback control provides substantial improvement in short period damping. For the integrated system, feedback control compensates for the coupling present in the model and provides good overall system stability. However, this feedback control law involves many non-zero gains. Analysis of suboptimal control strategies indicates that performance of the closed loop integrated system can be maintained with a feedback matrix in which the number of non-zero gains is small relative to the number of components in the feedback matrix.

  5. Classroom Integral Calculus: Some Useful Digressions When Teaching Integral Calculus.

    ERIC Educational Resources Information Center

    Acosta, Daniel J.; Wills, Randall

    2002-01-01

    Outlines ideas and exercises for two topics that accompany the standard treatment of integral calculus. Emphasizes intuition to help facilitate student comprehension of the definite integral as a limit of Riemann Sums. (Author/MM)

  6. High Efficiency Integrated Package

    SciTech Connect

    Ibbetson, James

    2013-09-15

    Solid-state lighting based on LEDs has emerged as a superior alternative to inefficient conventional lighting, particularly incandescent. LED lighting can lead to 80 percent energy savings; can last 50,000 hours – 2-50 times longer than most bulbs; and contains no toxic lead or mercury. However, to enable mass adoption, particularly at the consumer level, the cost of LED luminaires must be reduced by an order of magnitude while achieving superior efficiency, light quality and lifetime. To become viable, energy-efficient replacement solutions must deliver system efficacies of ≥ 100 lumens per watt (LPW) with excellent color rendering (CRI > 85) at a cost that enables payback cycles of two years or less for commercial applications. This development will enable significant site energy savings as it targets commercial and retail lighting applications that are most sensitive to the lifetime operating costs with their extended operating hours per day. If costs are reduced substantially, dramatic energy savings can be realized by replacing incandescent lighting in the residential market as well. In light of these challenges, Cree proposed to develop a multi-chip integrated LED package with an output of > 1000 lumens of warm white light operating at an efficacy of at least 128 LPW with a CRI > 85. This product will serve as the light engine for replacement lamps and luminaires. At the end of the proposed program, this integrated package was to be used in a proof-of-concept lamp prototype to demonstrate the component’s viability in a common form factor. During this project Cree SBTC developed an efficient, compact warm-white LED package with an integrated remote color down-converter. Via a combination of intensive optical, electrical, and thermal optimization, a package design was obtained that met nearly all project goals. This package emitted 1295 lm under instant-on, room-temperature testing conditions, with an efficacy of 128.4 lm/W at a color temperature of ~2873

  7. Integral Equation Technique for the Simulation of Signal Integrity and Power Integrity

    NASA Astrophysics Data System (ADS)

    Wei, Xing-Chang; Yang, De-Cao; Li, Er-Ping

    2011-09-01

    Signal integrity and power integrity are the critical issues for high-speed digital circuits. This paper reviews the state-of-the-arts of the integral equation technique used for the simulation of signal integrity and power integrity including the power and ground planes. According to the different circuit boundary conditions, the applied integral equation methods can be classified into mode method/segment method, image method, and equivalent electromagnetic currents method. The mode/segment and image method is used for power and ground planes with rectangular shapes, while the equivalent electromagnetic currents method is efficient for power and ground planes with arbitrary shapes. The most important part of these integral equations is the integral kernels (Green's functions). The integral kernels are derived for different circuit boundaries. Both the theoretical formula and simulation results are present, which are then verified with other available simulation methods and measurement results.

  8. A Real Integral by Means of Complex Integration

    ERIC Educational Resources Information Center

    de Oliveira, E. Capelas; Chiacchio, Ary O.

    2004-01-01

    This note presents and discusses a class of real integrals involving a hyperbolic function by means of complex integration. An integral representation is obtained which appears in several fields of physics, including statistical mechanics, condensed matter and quantum optics and more in the so called dispersion relations.

  9. Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings

    SciTech Connect

    Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

    2013-01-01

    This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

  10. Integral Presentations of Catalan Numbers

    ERIC Educational Resources Information Center

    Dana-Picard, Thierry

    2010-01-01

    We compute in three different ways the same definite parametric integral. By-products are the derivation of a combinatorial identity and two integral presentations of Catalan numbers. One of them leads to a presentation using the [gamma] function.

  11. Primary and secondary care integration.

    PubMed

    McCormick, I R; Boyd, M A

    1994-10-26

    Integration of primary and secondary health care is a goal of the 1993 New Zealand health reforms. Focus groups were selected to raise options and stimulate improved integration between primary and secondary care in the Auckland metropolitan and rural areas. Cooperation, communication, coordination, were considered relevant. Several detailed recommendations were produced. They fell into six groups; (1) liaison committees or meetings, (2) communication, (3) referral admission discharge, (4) joint ventures, (5) horizontal integration and (6) general. A key recommendation was that regional health authorities should fund liaison committees or functions to promote inter provider integration. The findings of the focus groups are placed in context of the wider requirements for integration. These are integrated funding, integrated information systems, integrated purchasing and utilisation management.

  12. Integrated Power Source Grant

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Traditional spacecraft power systems incorporate a solar array energy source, an energy storage element (battery), and battery charge control and bus voltage regulation electronics to provide continuous electrical power for spacecraft systems and instruments. Dedicated power conditioning components provide limited fault isolation between systems and instruments, while a centralized power-switching unit provides spacecraft load control. Battery undervoltage conditions are detected by the spacecraft processor, which removes fault conditions and non-critical loads before permanent battery damage can occur. Cost effective operation of a micro-sat constellation requires a fault tolerant spacecraft architecture that minimizes on-orbit operational costs by permitting autonomous reconfiguration in response to unexpected fault conditions. A new micro-sat power system architecture that enhances spacecraft fault tolerance and improves power system survivability by continuously managing the battery charge and discharge processes on a cell-by-cell basis has been developed. This architecture is based on the Integrated Power Source (US patent 5644207), which integrates dual junction solar cells, Lithium Ion battery cells, and processor based charge control electronics into a structural panel that can be deployed or used to form a portion of the outer shell of a micro-spacecraft. The first generation Integrated Power Source is configured as a one inch thick panel in which prismatic Lithium Ion battery cells are arranged in a 3x7 matrix (26VDC) and a 3x1 matrix (3.7VDC) to provide the required output voltages and load currents. A multi-layer structure holds the battery cells, as well as the thermal insulators that are necessary to protect the Lithium Ion battery cells from the extreme temperatures of the solar cell layer. Independent thermal radiators, located on the back of the panel, are dedicated to the solar cell array, the electronics, and the battery cell array. In deployed

  13. Integrated approach in Sichuan.

    PubMed

    Gao, M

    1996-02-01

    Sichuan province, which recently initiated an integrated approach to family planning, is described as the most populous province in China. Current population is about 110 million, and the average net increase is about 1.1 million annually. The rate of natural increase in about 10/1000. The province has a low level of socioeconomic development. Per capita income in 1993 was under 800 yuan. There is a large surplus of rural agricultural workers who migrated to urban areas seeking work. The Deputy Governor initiated a directive for encouraging all relevant departments to pool resources and help poor family planning acceptors. The proposal was for helping 10 poor family planning acceptors per township, 100 per county, 1000 per prefecture, and 10,000 per province. Officially, the integrated program was instituted in January 1995. In Xiaoquan town, Deyang City, the government was prepared to help 70 one-child households get rid of poverty and become well-off quickly. The local town cooperative was convinced to provide a loan of 2.5 million yuan for building a stock farm. Other units pitched in to build the farm and provide animals. The 70 farmers were employed in working the farm. Each earned about 1450 yuan per year. In Bajiao Township of Shifang County of Deyang City, poor family planning acceptors were employed in developing the production of the tuber of elevated gastrodia and the bark of eucommia. Funding and skill training were provided by the Bureau of Forestry of Deyang City. In Mingshan Town of Minghsan County, the government chief and family planning director helped family planning acceptors improve their skills in marketing watermelons. Family planning acceptors in Zhugengzhen Town of Leshan City were encouraged by town government to relax and wait out the temporary decline in pork prices. Acceptors later made a large profit from their sales. An outcome of these integrated programs has been "warm acceptance" from farmers and acceptors. PMID:12291340

  14. Integrative Physiology of Fasting.

    PubMed

    Secor, Stephen M; Carey, Hannah V

    2016-04-01

    Extended bouts of fasting are ingrained in the ecology of many organisms, characterizing aspects of reproduction, development, hibernation, estivation, migration, and infrequent feeding habits. The challenge of long fasting episodes is the need to maintain physiological homeostasis while relying solely on endogenous resources. To meet that challenge, animals utilize an integrated repertoire of behavioral, physiological, and biochemical responses that reduce metabolic rates, maintain tissue structure and function, and thus enhance survival. We have synthesized in this review the integrative physiological, morphological, and biochemical responses, and their stages, that characterize natural fasting bouts. Underlying the capacity to survive extended fasts are behaviors and mechanisms that reduce metabolic expenditure and shift the dependency to lipid utilization. Hormonal regulation and immune capacity are altered by fasting; hormones that trigger digestion, elevate metabolism, and support immune performance become depressed, whereas hormones that enhance the utilization of endogenous substrates are elevated. The negative energy budget that accompanies fasting leads to the loss of body mass as fat stores are depleted and tissues undergo atrophy (i.e., loss of mass). Absolute rates of body mass loss scale allometrically among vertebrates. Tissues and organs vary in the degree of atrophy and downregulation of function, depending on the degree to which they are used during the fast. Fasting affects the population dynamics and activities of the gut microbiota, an interplay that impacts the host's fasting biology. Fasting-induced gene expression programs underlie the broad spectrum of integrated physiological mechanisms responsible for an animal's ability to survive long episodes of natural fasting. PMID:27065168

  15. The Integral System

    PubMed Central

    2011-01-01

    The Integral System is a total care management system based on the Integral Theory which states ‘prolapse and symptoms of urinary stress, urge, abnormal bowel & bladder emptying, and some forms of pelvic pain, mainly arise, for different reasons, from laxity in the vagina or its supporting ligaments, a result of altered connective tissue’. Normal function The organs are suspended by ligaments against which muscles contract to open or close the their outlet tubes, urethra and anus. These ligaments fall naturally into a three-zone zone classification, anterior, middle, and posterior. Dysfunction Damaged ligaments weaken the force of muscle contraction, causing prolapse and abnormal bladder and bowel symptoms Diagnosis A pictorial diagnostic algorithm relates specific symptoms to damaged ligaments in each zone. Treatment In mild cases, new pelvic floor muscle exercises based on a squatting principle strengthen the natural closure muscles and their ligamentous insertions, thereby improving the symptoms predicted by the Theory. With more severe cases, polypropylene tapes applied through “keyhole” incision using special instruments reinforce the damaged ligaments, restoring structure and function. Problems that can be potentially addressed by application of the Integral System Urinary stress incontinenceUrinary urge incontinenceAbnormal bladder emptyingFacal incontinence and “obstructed evacuation” (“constipation”)Pelvic pain, and some types of vulvodynia and interstitial cystitisOrgan prolapse Conclusions Organ prolapse and symptoms are related, and both are mainly caused by laxity in the four main suspensory ligaments and perineal body. Restoration of ligament/fascial length and tension is required to restore anatomy and function. PMID:24578877

  16. Repast vector GIS integration.

    SciTech Connect

    Najlis, R.; North, M. J.; Decision and Information Sciences

    2005-01-01

    Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast.

  17. Integral resonator gyroscope

    NASA Technical Reports Server (NTRS)

    Shcheglov, Kirill V. (Inventor); Challoner, A. Dorian (Inventor); Hayworth, Ken J. (Inventor); Wiberg, Dean V. (Inventor); Yee, Karl Y. (Inventor)

    2008-01-01

    The present invention discloses an inertial sensor having an integral resonator. A typical sensor comprises a planar mechanical resonator for sensing motion of the inertial sensor and a case for housing the resonator. The resonator and a wall of the case are defined through an etching process. A typical method of producing the resonator includes etching a baseplate, bonding a wafer to the etched baseplate, through etching the wafer to form a planar mechanical resonator and the wall of the case and bonding an end cap wafer to the wall to complete the case.

  18. Multifuctional integrated sensors (MFISES).

    SciTech Connect

    Homeijer, Brian D.; Roozeboom, Clifton

    2015-10-01

    Many emerging IoT applications require sensing of multiple physical and environmental parameters for: completeness of information, measurement validation, unexpected demands, improved performance. For example, a typical outdoor weather station measures temperature, humidity, barometric pressure, light intensity, rainfall, wind speed and direction. Existing sensor technologies do not directly address the demand for cost, size, and power reduction in multi-paramater sensing applications. Industry sensor manufacturers have developed integrated sensor systems for inertial measurements that combine accelerometers, gyroscopes, and magnetometers, but do not address environmental sensing functionality. In existing research literature, a technology gap exists between the functionality of MEMS sensors and the real world applications of the sensors systems.

  19. STOVL Control Integration Program

    NASA Technical Reports Server (NTRS)

    Weiss, C.; Mcdowell, P.; Watts, S.

    1994-01-01

    An integrated flight/propulsion control for an advanced vector thrust supersonic STOVL aircraft, was developed by Pratt & Whitney and McDonnell Douglas Aerospace East. The IFPC design was based upon the partitioning of the global requirements into flight control and propulsion control requirements. To validate the design, aircraft and engine models were also developed for use on a NASA Ames piloted simulator. Different flight control implementations, evaluated for their handling qualities, are documented in the report along with the propulsion control, engine model, and aircraft model.

  20. Integrated circuit cell library

    NASA Technical Reports Server (NTRS)

    Whitaker, Sterling R. (Inventor); Miles, Lowell H. (Inventor)

    2005-01-01

    According to the invention, an ASIC cell library for use in creation of custom integrated circuits is disclosed. The ASIC cell library includes some first cells and some second cells. Each of the second cells includes two or more kernel cells. The ASIC cell library is at least 5% comprised of second cells. In various embodiments, the ASIC cell library could be 10% or more, 20% or more, 30% or more, 40% or more, 50% or more, 60% or more, 70% or more, 80% or more, 90% or more, or 95% or more comprised of second cells.

  1. Racism, narcissism, and integrity.

    PubMed

    Bell, C C

    1978-02-01

    Recently there has been much literature pertaining to the psychodynamics of narcissism and its relation to psychopathological and normal psychic functions. While these models of the mind are primarily aimed at understanding individual behavior in the therapeutic relationship, they are also useful in clarifying one's thinking about racism, which can be approached both from an individual and social viewpoint.The author demonstrates that the racist individual suffers from a defect in narcissistic personality development, which precludes the subsequent development of such qualities as creativity, empathy, and integrity.

  2. Monolithic microwave integrated circuits

    NASA Astrophysics Data System (ADS)

    Pucel, R. A.

    Monolithic microwave integrated circuits (MMICs), a new microwave technology which is expected to exert a profound influence on microwave circuit designs for future military systems as well as for the commercial and consumer markets, is discussed. The book contains an historical discussion followed by a comprehensive review presenting the current status in the field. The general topics of the volume are: design considerations, materials and processing considerations, monolithic circuit applications, and CAD, measurement, and packaging techniques. All phases of MMIC technology are covered, from design to testing.

  3. Integrated Assessment Modeling

    SciTech Connect

    Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

    2012-10-31

    This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

  4. Integrating ecology into biotechnology.

    PubMed

    McMahon, Katherine D; Martin, Hector Garcia; Hugenholtz, Philip

    2007-06-01

    New high-throughput culture-independent molecular tools are allowing the scientific community to characterize and understand the microbial communities underpinning environmental biotechnology processes in unprecedented ways. By creatively leveraging these new data sources, microbial ecology has the potential to transition from a purely descriptive to a predictive framework, in which ecological principles are integrated and exploited to engineer systems that are biologically optimized for the desired goal. But to achieve this goal, ecology, engineering and microbiology curricula need to be changed from the very root to better promote interdisciplinarity.

  5. Exactly conservation integrators

    SciTech Connect

    Shadwick, B.A.; Bowman, J.C.; Morrison, P.J.

    1999-03-01

    Traditional explicit numerical discretizations of conservative systems generically predict artificial secular drifts of any nonlinear invariants. In this work the authors present a general approach for developing explicit nontraditional algorithms that conserve such invariants exactly. They illustrate the method by applying it to the three-wave truncation of the Euler equations, the Lotka-Volterra predator-prey model, and the Kepler problem. The ideas are discussed in the context of symplectic (phase-space-conserving) integration methods as well as nonsymplectic conservative methods. They comment on the application of the method to general conservative systems.

  6. Integrated Immune Experiment

    NASA Technical Reports Server (NTRS)

    Crucian, Brian

    2009-01-01

    This viewgraph presentation reviews NASA's Integrated Immune Experiment. The objectives include: 1) Address significant lack of data regarding immune status during flight; 2) Replace several recent immune studies with one comprehensive study that will include in-flight sampling; 3) Determine the in-flight status of immunity, physiological stress, viral immunity/reactivation; 4) Determine the clinical risk related to immune dysregulation for exploration class spaceflight; and 5) Determine the appropriate monitoring strategy for spaceflight-associated immune dysfunction, that could be used for the evaluation of countermeasures.

  7. Future integrated design process

    NASA Technical Reports Server (NTRS)

    Meyer, D. D.

    1980-01-01

    The design process is one of the sources used to produce requirements for a computer system to integrate and manage product design data, program management information, and technical computation and engineering data management activities of the aerospace design process. Design activities were grouped chronologically and explored for activity type, activity interface, data quantity, and data flow. The work was based on analysis of the design process of several typical aerospace products, including both conventional and supersonic airplanes and a hydrofoil design. Activities examined included research, preliminary design, detail design, manufacturing interface, product verification, and product support. The design process was then described in an IPAD environment--the future.

  8. Exactly conservative integrators

    SciTech Connect

    Shadwick, B.A.; Bowman, J.C.; Morrison, P.J.

    1995-07-19

    Traditional numerical discretizations of conservative systems generically yield an artificial secular drift of any nonlinear invariants. In this work we present an explicit nontraditional algorithm that exactly conserves invariants. We illustrate the general method by applying it to the Three-Wave truncation of the Euler equations, the Volterra-Lotka predator-prey model, and the Kepler problem. We discuss our method in the context of symplectic (phase space conserving) integration methods as well as nonsymplectic conservative methods. We comment on the application of our method to general conservative systems.

  9. Optoelectronic integrated circuits

    NASA Astrophysics Data System (ADS)

    Forrest, Stephen R.

    1987-11-01

    The technology development requirements of several generic photonic systems for advanced optoelectronic ICs are currently being met by the fabrication of highly functional integrated transmitters, receivers, modulators, and arrays of such devices. Attention is presently given to illustrative examples of each of these, as well as of other 'archetypal' ICs. It is noted that the materials-growth techniques employed in optoelectronic IC structures constitute the foundation of their development hierarchy; the primary pacer of development progress is therefore the rapidity of advancements in epitaxial materials-growth technology.

  10. CopperCore Service Integration

    ERIC Educational Resources Information Center

    Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; van Rosmalen, Peter; Koper, Rob

    2007-01-01

    In an e-learning environment there is a need to integrate various e-learning services like assessment services, collaboration services, learning design services and communication services. In this article we present the design and implementation of a generic integrative service framework, called CopperCore Service Integration (CCSI). We will…

  11. Space shuttle operations integration plan

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The Operations Integration Plan is presented, which is to provide functional definition of the activities necessary to develop and integrate shuttle operating plans and facilities to support flight, flight control, and operations. It identifies the major tasks, the organizations responsible, their interrelationships, the sequence of activities and interfaces, and the resultant products related to operations integration.

  12. New Perspectives on School Integration.

    ERIC Educational Resources Information Center

    Friedman, Murray, Ed.; And Others

    Sixteen essays dealing with issues surrounding school desegregation and racial integration comprise this book: (1) "School Integration Today: The Case for New Definitions," by Murray Friedman; (2) "Defining Brown's Integration Remedy for Urban School Systems," by Derrick A. Bell, Jr.; (3) "School Desegregation Can Succeed: The Pennsylvania…

  13. Teaching Integration Applications Using Manipulatives

    ERIC Educational Resources Information Center

    Bhatia, Kavita; Premadasa, Kirthi; Martin, Paul

    2014-01-01

    Calculus students' difficulties in understanding integration have been extensively studied. Research shows that the difficulty lies with students understanding of the definition of the definite integral as a limit of a Riemann sum and with the idea of accumulation inherent in integration. We have created a set of manipulatives and activities…

  14. Spatial Grouping Determines Temporal Integration

    ERIC Educational Resources Information Center

    Hermens, Frouke; Scharnowski, Frank; Herzog, Michael H.

    2009-01-01

    To make sense out of a continuously changing visual world, people need to integrate features across space and time. Despite more than a century of research, the mechanisms of features integration are still a matter of debate. To examine how temporal and spatial integration interact, the authors measured the amount of temporal fusion (a measure of…

  15. Compact, Integrated Photoelectron Linacs

    NASA Astrophysics Data System (ADS)

    Yu, David

    2000-12-01

    The innovative compact high energy iniector which has been developed by DULY Research Inc., will have wide scientific industrial and medical applications. The new photoelectron injector integrates the photocathode directly into a multicell linear accelerator with no drift space between the injector and the linac. By focusing the beam with solenoid or permanent magnets, and producing high current with low emittance, extremely high brightness is achieved. In addition to providing a small footprint and improved beam quality in an integrated structure, the compact system considerably simplifies external subsystems required to operate the photoelectron linac, including rf power transport, beam focusing, vacuum and cooling. The photoelectron linac employs an innovative Plane-Wave-Transformer (PWT) design, which provides strong cell-to-cell coupling, relaxes manufacturing tolerance and facilitates the attachment of external ports to the compact structure with minimal field interference. DULY Research Inc. under the support of the DOE Small Business Innovation Research (SBIR) program, has developed, constructed and installed a 20-MeV, S-band compact electron source at UCLA. DULY Research is also presently engaged in the development of an X-band photoelectron linear accelerator in another SBIR project. The higher frequency structure when completed will be approximately three times smaller, and capable of a beam brightness ten times higher than the S-band structure.

  16. Integrative Physical Oncology

    PubMed Central

    Hatzikirou, Haralampos; Chauviere, Arnaud; Bauer, Amy L.; Leier, André; Lewis, Michael T.; Macklin, Paul; Marquez-Lago, Tatiana T.; Bearer, Elaine L.; Cristini, Vittorio

    2013-01-01

    Cancer is arguably the ultimate complex biological system. Solid tumors are micro-structured soft matter that evolves as a consequence of spatio-temporal events at the intracellular (e.g., signaling pathways, macromolecular trafficking), intercellular (e.g., cell-cell adhesion/communication), and tissue (e.g., cell-extracellular matrix interactions, mechanical forces) scales. To gain insight, tumor and developmental biologists have gathered a wealth of molecular, cellular and genetic data, including immunohistochemical measurements of cell type-specific division and death rates, lineage tracing, and gain-of-function/loss-of-function mutational analyses. These data are empirically extrapolated to a diagnosis/prognosis of tissue-scale behavior, e.g., for clinical decision. Integrative Physical Oncology (IPO) is the science that develops physically consistent mathematical approaches to address the significant challenge of bridging the nano (nm)-micro (μm) to macro (mm, cm) scales with respect to tumor development and progression. In the current literature, such approaches are referred to as multiscale modeling. In the present review, we attempt to assess recent modeling approaches on each separate scale and critically evaluate the current “hybrid-multiscale” models used to investigate tumor growth in the context of brain and breast cancers. Finally, we provide our perspective on the further development and the impact of Integrative Physical Oncology. PMID:21853537

  17. Updated Integrated Mission Program

    NASA Technical Reports Server (NTRS)

    Dauro, Vincent A., Sr.

    2003-01-01

    Integrated Mission Program (IMP) is a computer program for simulating spacecraft missions around the Earth, Moon, Mars, and/or other large bodies. IMP solves the differential equations of motion by use of a Runge-Kutta numerical-integration algorithm. Users control missions through selection from a large menu of events and maneuvers. Mission profiles, time lines, propellant requirements, feasibility analyses, and perturbation analyses can be computed quickly and accurately. A prior version of IMP, written in FORTRAN 77, was reported in Program Simulates Spacecraft Missions (MFS-28606), NASA Tech Briefs, Vol. 17, No. 4 (April 1993), page 60. The present version, written in double-precision Lahey FORTRAN 90, incorporates a number of improvements over the prior version. Some of the improvements modernize the code to take advantage of today's greater central-processing-unit speeds. Other improvements render the code more modular; provide additional input, output, and debugging capabilities; and add to the variety of maneuvers, events, and means of propulsion that can be simulated. The IMP user manuals (of which there are now ten, each addressing a different aspect of the code and its use) have been updated accordingly.

  18. Integrating preconcentrator heat controller

    DOEpatents

    Bouchier, Francis A.; Arakaki, Lester H.; Varley, Eric S.

    2007-10-16

    A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

  19. The integrated disease network.

    PubMed

    Sun, Kai; Buchan, Natalie; Larminie, Chris; Pržulj, Nataša

    2014-11-01

    The growing body of transcriptomic, proteomic, metabolomic and genomic data generated from disease states provides a great opportunity to improve our current understanding of the molecular mechanisms driving diseases and shared between diseases. The use of both clinical and molecular phenotypes will lead to better disease understanding and classification. In this study, we set out to gain novel insights into diseases and their relationships by utilising knowledge gained from system-level molecular data. We integrated different types of biological data including genome-wide association studies data, disease-chemical associations, biological pathways and Gene Ontology annotations into an Integrated Disease Network (IDN), a heterogeneous network where nodes are bio-entities and edges between nodes represent their associations. We also introduced a novel disease similarity measure to infer disease-disease associations from the IDN. Our predicted associations were systemically evaluated against the Medical Subject Heading classification and a statistical measure of disease co-occurrence in PubMed. The strong correlation between our predictions and co-occurrence associations indicated the ability of our approach to recover known disease associations. Furthermore, we presented a case study of Crohn's disease. We demonstrated that our approach not only identified well-established connections between Crohn's disease and other diseases, but also revealed new, interesting connections consistent with emerging literature. Our approach also enabled ready access to the knowledge supporting these new connections, making this a powerful approach for exploring connections between diseases.

  20. Integrated optic ammonia sensor

    NASA Astrophysics Data System (ADS)

    Klein, Rainer; Voges, Edgar I.

    1993-05-01

    Most of the disadvantages that exist with electrochemical devices (e.g., short lifetimes, difficult to miniaturize, need of reference electrodes) can be avoided by using optical sensors. Smock et al. describe a device incorporating a ninhydrin coated fused silica rod that could detect ammonia vapor at concentrations below 100 ppb, however, the reaction is irreversible. Guiliani et al. describe a reversible sensor using a dye coated capillary tube. The dye utilized is oxazine perchlorate, a laser dye. They report that the presence of water vapor is an important factor in the detection of ammonia, and the concentration of water vapor must be controlled. Optical sensors built-up in integrated-optic technique with planar waveguide configurations allow the construction of optical sensor systems for a parallel detection of several chemical species, provide the generation of reference signals, and facilitate the problem of cross-sensitivities. Here, we report on integrated-optic sensors for ammonia detection with a sensitivity in the ppb-range. The reaction is reversible, and the response is independent of the water vapor concentration in the test gas.

  1. Integrated Medical Model Overview

    NASA Technical Reports Server (NTRS)

    Myers, J.; Boley, L.; Foy, M.; Goodenow, D.; Griffin, D.; Keenan, A.; Kerstman, E.; Melton, S.; McGuire, K.; Saile, L.; Shah, R.; Garcia, Y.; Sirmons. B.; Walton, M.; Reyes, D.

    2015-01-01

    The Integrated Medical Model (IMM) Project represents one aspect of NASA's Human Research Program (HRP) to quantitatively assess medical risks to astronauts for existing operational missions as well as missions associated with future exploration and commercial space flight ventures. The IMM takes a probabilistic approach to assessing the likelihood and specific outcomes of one hundred medical conditions within the envelope of accepted space flight standards of care over a selectable range of mission capabilities. A specially developed Integrated Medical Evidence Database (iMED) maintains evidence-based, organizational knowledge across a variety of data sources. Since becoming operational in 2011, version 3.0 of the IMM, the supporting iMED, and the expertise of the IMM project team have contributed to a wide range of decision and informational processes for the space medical and human research community. This presentation provides an overview of the IMM conceptual architecture and range of application through examples of actual space flight community questions posed to the IMM project.

  2. Integrated Bayesian Experimental Design

    NASA Astrophysics Data System (ADS)

    Fischer, R.; Dreier, H.; Dinklage, A.; Kurzan, B.; Pasch, E.

    2005-11-01

    Any scientist planning experiments wants to optimize the design of a future experiment with respect to best performance within the scheduled experimental scenarios. Bayesian Experimental Design (BED) aims in finding optimal experimental settings based on an information theoretic utility function. Optimal design parameters are found by maximizing an expected utility function where the future data and the parameters of physical scenarios of interest are marginalized. The goal of the Integrated Bayesian Experimental Design (IBED) concept is to combine experiments as early as on the design phase to mutually exploit the benefits of the other experiments. The Bayesian Integrated Data Analysis (IDA) concept of linking interdependent measurements to provide a validated data base and to exploit synergetic effects will be used to design meta-diagnostics. An example is given by the Thomson scattering (TS) and the interferometry (IF) diagnostics individually, and a set of both. In finding the optimal experimental design for the meta-diagnostic, TS and IF, the strengths of both experiments can be combined to synergistically increase the reliability of results.

  3. Species integrity in trees.

    PubMed

    Ortiz-Barrientos, Daniel; Baack, Eric J

    2014-09-01

    From California sequoia, to Australian eucalyptus, to the outstanding diversity of Amazonian forests, trees are fundamental to many processes in ecology and evolution. Trees define the communities that they inhabit, are host to a multiplicity of other organisms and can determine the ecological dynamics of other plants and animals. Trees are also at the heart of major patterns of biodiversity such as the latitudinal gradient of species diversity and thus are important systems for studying the origin of new plant species. Although the role of trees in community assembly and ecological succession is partially understood, the origin of tree diversity remains largely opaque. For instance, the relative importance of differing habitats and phenologies as barriers to hybridization between closely related species is still largely uncharacterized in trees. Consequently, we know very little about the origin of trees species and their integrity. Similarly, studies on the interplay between speciation and tree community assembly are in their infancy and so are studies on how processes like forest maturation modifies the context in which reproductive isolation evolves. In this issue of Molecular Ecology, Lindtke et al. (2014) and Lagache et al. (2014) overcome some traditional difficulties in studying mating systems and sexual isolation in the iconic oaks and poplars, providing novel insights about the integrity of tree species and on how ecology leads to variation in selection on reproductive isolation over time and space. PMID:25155715

  4. Index of cyber integrity

    NASA Astrophysics Data System (ADS)

    Anderson, Gustave

    2014-05-01

    Unfortunately, there is no metric, nor set of metrics, that are both general enough to encompass all possible types of applications yet specific enough to capture the application and attack specific details. As a result we are left with ad-hoc methods for generating evaluations of the security of our systems. Current state of the art methods for evaluating the security of systems include penetration testing and cyber evaluation tests. For these evaluations, security professionals simulate an attack from malicious outsiders and malicious insiders. These evaluations are very productive and are able to discover potential vulnerabilities resulting from improper system configuration, hardware and software flaws, or operational weaknesses. We therefore propose the index of cyber integrity (ICI), which is modeled after the index of biological integrity (IBI) to provide a holistic measure of the health of a system under test in a cyber-environment. The ICI provides a broad base measure through a collection of application and system specific metrics. In this paper, following the example of the IBI, we demonstrate how a multi-metric index may be used as a holistic measure of the health of a system under test in a cyber-environment.

  5. Integrated healthcare information systems.

    PubMed

    Miller, J

    1995-01-01

    When it comes to electronic data processing in healthcare, we offer a guarded, but hopeful, prognosis. To be sure, the age of electronic information processing has hit healthcare. Employers, insurance companies, hospitals, physicians and a host of ancillary service providers are all being ushered into a world of high speed, high tech electronic information. Some are even predicting that the health information business will grow from $20 billion to over $100 billion in a decade. Yet, out industry lags behind other industries in its overall movement to the paperless world. Selecting and installing the most advanced integrated information system isn't a simple task, as we've seen. As in life, compromises can produce less than optimal results. Nevertheless, integrated healthcare systems simply won't achieve their goals without systems designed to support the operation of a continuum of services. That's the reality! It is difficult to read about the wonderful advances in other sectors, while realizing that many trees still fall each year in the name of the health care industry. Yes, there are some outstanding examples of organizations pushing the envelop in a variety of areas. Yet from a very practical standpoint, many (like our physician's office) are still struggling or are on the sidelines wondering what to do. Given the competitive marketplace, organizations without effective systems may not have long to wonder and wait.

  6. Integrating geophysical and hydrochemical borehole-log measurements to characterize the Chalk aquifer, Berkshire, United Kingdom

    NASA Astrophysics Data System (ADS)

    Schürch, Marc; Buckley, David

    2002-09-01

    Geophysical and hydrochemical borehole-logging techniques were integrated to characterize hydraulic and hydrogeochemical properties of the Chalk aquifer at boreholes in Berkshire, UK. The down-hole measurements were made to locate fissures in the chalk, their spatial extent between boreholes, and to determine the groundwater chemical quality of the water-bearing layers. The geophysical borehole logging methods used were caliper, focused resistivity, induction resistivity, gamma ray, fluid temperature, fluid electrical conductivity, impeller and heat-pulse flowmeter, together with borehole wall optical-imaging. A multiparameter data transmitter was used to measure groundwater temperature, electrical conductivity, dissolved oxygen, pH, and redox potential of the borehole fluid down-hole. High permeability developed at the Chalk Rock by groundwater circulation provides the major flow horizon at the Banterwick Barn study site and represents a conduit system that serves as an effective local hydraulic connection between the boreholes. The Chalk Rock includes several lithified solution-ridden layers, hardgrounds, which imply a gap in sedimentation possibly representing an unconformity. Lower groundwater temperature, high dissolved-oxygen content, and flowmeter evidence of preferential groundwater flow in the Chalk Rock indicated rapid groundwater circulation along this horizon. By repeating the logging at different times of the year under changing hydraulic conditions, other water-inflow horizons within the Chalk aquifer were recognized. Résumé. Des techniques géophysiques et hydrochimiques de diagraphies en forage ont été mises en oeuvre pour caractériser les propriétés hydrauliques et hydrogéochimiques de l'aquifère de la craie dans des forages du Berkshire (Grande-Bretagne). Les mesures en descente ont été faites pour localiser les fissures dans la craie et leur développement spatial entre forages, et pour déterminer la qualité de l'eau souterraine des

  7. Integrating unseen events over time.

    PubMed

    Reber, Thomas P; Henke, Katharina

    2012-06-01

    Events often share elements that guide us to integrate knowledge from these events. Integration allows us to make inferences that affect reactions to new events. Integrating events and making inferences are thought to depend on consciousness. We show that even unconsciously experienced events, that share elements, are integrated and influence reactions to new events. An unconscious event consisted of the subliminal presentation of two unrelated words. Half of subliminal word pairs shared one word ('winter red', 'red computer'). Overlapping word pairs were presented between 6s and 78 s apart. The test for integration required participants to judge the semantic distance between suprathreshold words ('winter computer'). Evidence of integration was provided by faster reactions to suprathreshold words that were indirectly related versus unrelated. This effect was independent of the time interval between overlapping word pairs. We conclude that consciousness is no requirement for the integration of discontiguous events.

  8. Virtual integral holography

    NASA Astrophysics Data System (ADS)

    Venolia, Dan S.; Williams, Lance

    1990-08-01

    A range of stereoscopic display technologies exist which are no more intrusive, to the user, than a pair of spectacles. Combining such a display system with sensors for the position and orientation of the user's point-of-view results in a greatly enhanced depiction of three-dimensional data. As the point of view changes, the stereo display channels are updated in real time. The face of a monitor or display screen becomes a window on a three-dimensional scene. Motion parallax naturally conveys the placement and relative depth of objects in the field of view. Most of the advantages of "head-mounted display" technology are achieved with a less cumbersome system. To derive the full benefits of stereo combined with motion parallax, both stereo channels must be updated in real time. This may limit the size and complexity of data bases which can be viewed on processors of modest resources, and restrict the use of additional three-dimensional cues, such as texture mapping, depth cueing, and hidden surface elimination. Effective use of "full 3D" may still be undertaken in a non-interactive mode. Integral composite holograms have often been advanced as a powerful 3D visualization tool. Such a hologram is typically produced from a film recording of an object on a turntable, or a computer animation of an object rotating about one axis. The individual frames of film are multiplexed, in a composite hologram, in such a way as to be indexed by viewing angle. The composite may be produced as a cylinder transparency, which provides a stereo view of the object as if enclosed within the cylinder, which can be viewed from any angle. No vertical parallax is usually provided (this would require increasing the dimensionality of the multiplexing scheme), but the three dimensional image is highly resolved and easy to view and interpret. Even a modest processor can duplicate the effect of such a precomputed display, provided sufficient memory and bus bandwidth. This paper describes the

  9. Integrated Environmental Control Model

    1999-09-03

    IECM is a powerful multimedia engineering software program for simulating an integrated coal-fired power plant. It provides a capability to model various conventional and advanced processes for controlling air pollutant emissions from coal-fired power plants before, during, or after combustion. The principal purpose of the model is to calculate the performance, emissions, and cost of power plant configurations employing alternative environmental control methods. The model consists of various control technology modules, which may be integratedmore » into a complete utility plant in any desired combination. In contrast to conventional deterministic models, the IECM offers the unique capability to assign probabilistic values to all model input parameters, and to obtain probabilistic outputs in the form of cumulative distribution functions indicating the likelihood of dofferent costs and performance results. A Graphical Use Interface (GUI) facilitates the configuration of the technologies, entry of data, and retrieval of results.« less

  10. Integrated diamond sapphire laser

    NASA Astrophysics Data System (ADS)

    Fork, Richard L.; Walker, Wesley W.; Laycock, Rustin L.; Green, Jason J. A.; Cole, Spencer T.

    2003-10-01

    We use analytic expressions and simulations to examine a model laser gain element formed by integrating diamond and a solid state laser material, such as, Ti:sapphire. The gain element is designed to provide in a single composite structure the thermal management capabilities of diamond and the optical amplification of the laser material. The model results indicate low temperature and a specific radial dependence of the heat transfer coefficient at the material interfaces are needed to access the highest average powers and highest quality optical fields. We outline paths designed to increase average output power of a lowest order mode laser oscillator based on these gain elements to megawatt levels. The long term goal is economically viable solar power delivered safely from space. The short term goal is a design strategy that will facilitate "proof of principle" demonstrations using currently accessible optical pump and thermal management capabilities.

  11. Matrix membranes and integrability

    SciTech Connect

    Zachos, C.; Fairlie, D.; Curtright, T.

    1997-06-01

    This is a pedagogical digest of results reported in Curtright, Fairlie, {ampersand} Zachos 1997, and an explicit implementation of Euler`s construction for the solution of the Poisson Bracket dual Nahm equation. But it does not cover 9 and 10-dimensional systems, and subsequent progress on them Fairlie 1997. Cubic interactions are considered in 3 and 7 space dimensions, respectively, for bosonic membranes in Poisson Bracket form. Their symmetries and vacuum configurations are explored. Their associated first order equations are transformed to Nahm`s equations, and are hence seen to be integrable, for the 3-dimensional case, by virtue of the explicit Lax pair provided. Most constructions introduced also apply to matrix commutator or Moyal Bracket analogs.

  12. Odin environment integration mechanism

    SciTech Connect

    Clemm, G.; Osterweil, L.

    1986-04-01

    A method of integrating software development tools is described. A data centered approach is taken, the software objects residing in a software object (data) repository. Odin can be thought of as an interpreter for a high level command language whose operands are the various software objects in the data repository and whose operators are the various tool fragments used to construct the software tools. Software objects can be such tools as source code, parse trees, symbol tables, flow graphs, documentation, test data, test results, and program structure representations. Discussions of previous research, Odin architecture, design, the Odin request language, the Odin specification language, and an example of Odin implementation are presented. 45 refs., 8 figs. (DWL)

  13. Computer integrated documentation

    NASA Technical Reports Server (NTRS)

    Boy, Guy

    1991-01-01

    The main technical issues of the Computer Integrated Documentation (CID) project are presented. The problem of automation of documents management and maintenance is analyzed both from an artificial intelligence viewpoint and from a human factors viewpoint. Possible technologies for CID are reviewed: conventional approaches to indexing and information retrieval; hypertext; and knowledge based systems. A particular effort was made to provide an appropriate representation for contextual knowledge. This representation is used to generate context on hypertext links. Thus, indexing in CID is context sensitive. The implementation of the current version of CID is described. It includes a hypertext data base, a knowledge based management and maintenance system, and a user interface. A series is also presented of theoretical considerations as navigation in hyperspace, acquisition of indexing knowledge, generation and maintenance of a large documentation, and relation to other work.

  14. Materials Integrating Photochemical Upconversion.

    PubMed

    McCusker, Catherine E; Castellano, Felix N

    2016-04-01

    This review features recent experimental work focused on the preparation and characterization of materials that integrate photochemical upconversion derived from sensitized triplet-triplet annihilation, resulting in the conversion of low energy photons to higher energy light, thereby enabling numerous wavelength-shifting applications. Recent topical developments in upconversion include encapsulating or rigidifying fluid solutions to give them mechanical strength, adapting inert host materials to enable upconversion, and using photoactive materials that incorporate the sensitizer and/or the acceptor. The driving force behind translating photochemical upconversion from solution into hard and soft materials is the incorporation of upconversion into devices and other applications. At present, some of the most promising applications of upconversion materials include imaging and fluorescence microscopy, photoelectrochemical devices, water disinfection, and solar cell enhancement.

  15. Integrated Dual Imaging Detector

    NASA Technical Reports Server (NTRS)

    Rust, David M.

    1999-01-01

    A new type of image detector was designed to simultaneously analyze the polarization of light at all picture elements in a scene. The integrated Dual Imaging detector (IDID) consists of a lenslet array and a polarizing beamsplitter bonded to a commercial charge coupled device (CCD). The IDID simplifies the design and operation of solar vector magnetographs and the imaging polarimeters and spectroscopic imagers used, for example, in atmosphere and solar research. When used in a solar telescope, the vector magnetic fields on the solar surface. Other applications include environmental monitoring, robot vision, and medical diagnoses (through the eye). Innovations in the IDID include (1) two interleaved imaging arrays (one for each polarization plane); (2) large dynamic range (well depth of 10(exp 5) electrons per pixel); (3) simultaneous readout and display of both images; and (4) laptop computer signal processing to produce polarization maps in field situations.

  16. Integrated traffic system

    SciTech Connect

    Creighton, H. ); Allen, R.; Stewart, S.; Hayto, S. )

    1990-11-01

    The traffic congestion on our roads today is becoming a critical problem. There is increased fuel consumption as cars wait along poorly timed arterials. Safety is threatened as poor traffic flow leads to collisions. This paper reports that Transport Canada and the Ministry of Transportation Ontario has developed an integrated traffic system (ITS). The system is designed to enable the optimization of traffic flow on existing roadways. The ITS system contains a data-base management system for traffic data (including accidents, roadway volumes, and signal timing details) and links this data base to the traffic analysis programs. This will ease the data management situation within the municipalities and standardize the traffic operations and reduce duplication of computerization development efforts.

  17. Integrated fluorescence analysis system

    DOEpatents

    Buican, Tudor N.; Yoshida, Thomas M.

    1992-01-01

    An integrated fluorescence analysis system enables a component part of a sample to be virtually sorted within a sample volume after a spectrum of the component part has been identified from a fluorescence spectrum of the entire sample in a flow cytometer. Birefringent optics enables the entire spectrum to be resolved into a set of numbers representing the intensity of spectral components of the spectrum. One or more spectral components are selected to program a scanning laser microscope, preferably a confocal microscope, whereby the spectrum from individual pixels or voxels in the sample can be compared. Individual pixels or voxels containing the selected spectral components are identified and an image may be formed to show the morphology of the sample with respect to only those components having the selected spectral components. There is no need for any physical sorting of the sample components to obtain the morphological information.

  18. Rythmos Numerical Integration Package

    2006-09-01

    Rythmos numerically integrates transient differential equations. The differential equations can be explicit or implicit ordinary differential equations ofr formulated as fully implicit differential-algebraic equations. Methods include backward Euler, forward Euler, explicit Runge-Kutta, and implicit BDF at this time. Native support for operator split methods and strict modularity are strong design goals. Forward sensitivity computations will be included in the first release with adjoint sensitivities coming in the near future. Rythmos heavily relies on Thyra formore » linear algebra and nonlinear solver interfaces to AztecOO, Amesos, IFPack, and NOX in Tilinos. Rythmos is specially suited for stiff differential equations and thos applictions where operator split methods have a big advantage, e.g. Computational fluid dynamics, convection-diffusion equations, etc.« less

  19. Integrated optical sensor

    DOEpatents

    Watkins, Arthur D.; Smartt, Herschel B.; Taylor, Paul L.

    1994-01-01

    An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

  20. Integrated optical sensor

    DOEpatents

    Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

    1994-01-04

    An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

  1. Air Ground Integration Study

    NASA Technical Reports Server (NTRS)

    Lozito, Sandy; Mackintosh, Margaret-Anne; DiMeo, Karen; Kopardekar, Parimal

    2002-01-01

    A simulation was conducted to examine the effect of shared air/ground authority when each is equipped with enhanced traffic- and conflict-alerting systems. The potential benefits of an advanced air traffic management (ATM) concept referred to as "free flight" include improved safety through enhanced conflict detection and resolution capabilities, increased flight-operations management, and better decision-making tools for air traffic controllers and flight crews. One element of the free-flight concept suggests shifting aircraft separation responsibility from air traffic controllers to flight crews, thereby creating an environment with "shared-separation" authority. During FY00. NASA, the Federal Aviation Administration (FAA), and the Volpe National Transportation Systems Center completed the first integrated, high-fidelity, real-time, human-in-the-loop simulation.

  2. Integrated oxygen recovery system

    NASA Technical Reports Server (NTRS)

    Lee, M. Gene; Davenport, Ronald J.

    1993-01-01

    Life Systems has conceptualized an innovative Integrated Oxygen Recovery System (IORS) applicable to advanced mission air revitalization. The IORS provides the capability to electrochemically generate metabolic oxygen (O2) and recover O2 from the space habitat atmosphere via a carbon dioxide (CO2) reduction process within a single assembly. To achieve this capability, the IORS utilizes a Solid Metal Cathode (SMC) water electrolysis unit that simultaneously serves as the Sabatier CO2 reduction reactor. The IORS enables two major life support systems currently baselined in closed loop air revitalization systems to be combined into one smaller, less complex system. This concept reduces fluidic and electrical interface requirements and eliminates a hydrogen (H2) interface. Life Systems is performing an evaluation of the IORS process directed at demonstrating performance and quantifying key physical characteristics including power, weight, and volume. The results of the checkout, shakedown, and initial parametric tests are summarized.

  3. Integrated oxygen recovery system

    NASA Technical Reports Server (NTRS)

    Lee, M. Gene; Davenport, Ronald J.

    1993-01-01

    Life Systems has conceptualized an innovative Integrated Oxygen Recovery System (IORS) applicable to advanced mission air revitalization. The IORS provides the capability to electrochemically generate metabolic oxygen (O2) and recover O2 from the space habitat atmosphere via a carbon dioxide (CO2) reduction process within a single assembly. To achieve this capability, the IORS utilizes a Solid Metal Cathode (SMC) water electrolysis unit that simultaneously serves as the Sabatier CO2 reduction reactor. The IORS enables two major life support systems currently baselined in closed loop air revitalization systems to be combined into one smaller, less complex system. This concept reduces fluidic and electrical interface requirements and eliminates a hydrogen (H2) interface. Life Systems is performing an evaluation of the IORS process directed at demonstrating performance and quantifying key physical characteristics including power, weight, and volume. Technical progress achieved during the first two months of the program is summarized.

  4. Integrated Airport Surface Operations

    NASA Technical Reports Server (NTRS)

    Koczo, S.

    1998-01-01

    The current air traffic environment in airport terminal areas experiences substantial delays when weather conditions deteriorate to Instrument Meteorological Conditions (IMC). Research activity at NASA has culminated in the development, flight test and demonstration of a prototype Low Visibility Landing and Surface Operations (LVLASO) system. A NASA led industry team and the FAA developed the system which integrated airport surface surveillance systems, aeronautical data links, DGPS navigation, automation systems, and controller and flight deck displays. The LVLASO system was demonstrated at the Hartsfield-Atlanta International Airport using a Boeing 757-200 aircraft during August, 1997. This report documents the contractors role in this testing particularly in the area of data link and DGPS navigation.

  5. Rythmos Numerical Integration Package

    SciTech Connect

    Coffey, Todd S.; Bartlett, Roscoe A.

    2006-09-01

    Rythmos numerically integrates transient differential equations. The differential equations can be explicit or implicit ordinary differential equations ofr formulated as fully implicit differential-algebraic equations. Methods include backward Euler, forward Euler, explicit Runge-Kutta, and implicit BDF at this time. Native support for operator split methods and strict modularity are strong design goals. Forward sensitivity computations will be included in the first release with adjoint sensitivities coming in the near future. Rythmos heavily relies on Thyra for linear algebra and nonlinear solver interfaces to AztecOO, Amesos, IFPack, and NOX in Tilinos. Rythmos is specially suited for stiff differential equations and thos applictions where operator split methods have a big advantage, e.g. Computational fluid dynamics, convection-diffusion equations, etc.

  6. Materials Integrating Photochemical Upconversion.

    PubMed

    McCusker, Catherine E; Castellano, Felix N

    2016-04-01

    This review features recent experimental work focused on the preparation and characterization of materials that integrate photochemical upconversion derived from sensitized triplet-triplet annihilation, resulting in the conversion of low energy photons to higher energy light, thereby enabling numerous wavelength-shifting applications. Recent topical developments in upconversion include encapsulating or rigidifying fluid solutions to give them mechanical strength, adapting inert host materials to enable upconversion, and using photoactive materials that incorporate the sensitizer and/or the acceptor. The driving force behind translating photochemical upconversion from solution into hard and soft materials is the incorporation of upconversion into devices and other applications. At present, some of the most promising applications of upconversion materials include imaging and fluorescence microscopy, photoelectrochemical devices, water disinfection, and solar cell enhancement. PMID:27573144

  7. Mechanotransduction and cartilage integrity

    PubMed Central

    Leong, Daniel J.; Hardin, John A.; Cobelli, Neil J.; Sun, Hui B.

    2015-01-01

    Osteoarthritis (OA) is characterized by the breakdown of articular cartilage that is mediated in part by increased production of matrix metalloproteinases (MMPs) and aggrecanases (ADAMTS), enzymes that degrade components of the cartilage extracellular matrix. Efforts to design synthetic inhibitors of MMPs/ADAMTS have only led to limited clinical success. In addition to pharmacologic therapies, physiologic joint loading is widely recommended as a nonpharmacologic approach to improve joint function in osteoarthritis. Clinical trials report that moderate levels of exercise exert beneficial effects, such as improvements in pain and physical function. Experimental studies demonstrate that mechanical loading mitigates joint destruction through the downregulation of MMPs/ADAMTS. However, the molecular mechanisms underlying these effects of physiologic loading on arthritic joints are not well understood. We review here the recent progress on mechanotransduction in articular joints, highlighting the mediators and pathways in the maintenance of cartilage integrity, especially in the prevention of cartilage degradation in OA. PMID:22172037

  8. Integrated microfluidic probe station

    NASA Astrophysics Data System (ADS)

    Perrault, C. M.; Qasaimeh, M. A.; Brastaviceanu, T.; Anderson, K.; Kabakibo, Y.; Juncker, D.

    2010-11-01

    The microfluidic probe (MFP) consists of a flat, blunt tip with two apertures for the injection and reaspiration of a microjet into a solution—thus hydrodynamically confining the microjet—and is operated atop an inverted microscope that enables live imaging. By scanning across a surface, the microjet can be used for surface processing with the capability of both depositing and removing material; as it operates under immersed conditions, sensitive biological materials and living cells can be processed. During scanning, the MFP is kept immobile and centered over the objective of the inverted microscope, a few micrometers above a substrate that is displaced by moving the microscope stage and that is flushed continuously with the microjet. For consistent and reproducible surface processing, the gap between the MFP and the substrate, the MFP's alignment, the scanning speed, the injection and aspiration flow rates, and the image capture need all to be controlled and synchronized. Here, we present an automated MFP station that integrates all of these functionalities and automates the key operational parameters. A custom software program is used to control an independent motorized Z stage for adjusting the gap, a motorized microscope stage for scanning the substrate, up to 16 syringe pumps for injecting and aspirating fluids, and an inverted fluorescence microscope equipped with a charge-coupled device camera. The parallelism between the MFP and the substrate is adjusted using manual goniometer at the beginning of the experiment. The alignment of the injection and aspiration apertures along the scanning axis is performed using a newly designed MFP screw holder. We illustrate the integrated MFP station by the programmed, automated patterning of fluorescently labeled biotin on a streptavidin-coated surface.

  9. ARM Data Integrator

    SciTech Connect

    2014-02-06

    The Atmospheric Radiation Measurement (ARM) Data Integrator (ADI) streamlines the development of scientific algorithms and analysis of time-series NetCDF data, and improves the content and consistency of the output data products produced by these algorithms. The framework automates the process of retrieving and preparing data for analysis, and allows users to design output data products through a graphical interface. It also provides a modular, flexible software development architecture that scientists can use to generate C, Python, and IDL source code templates that embed the pre and post processing logic allowing the scientist to focus on only their science. The input data, preprocessing, and output data specifications of algorithms are defined through a graphical interface and stored in a database. ADI implements workflow for data integration and supports user access to data through a library of software modules. Data preprocess capabilities supported include automated retrieval of data from input files, merging the retrieved data into appropriately sized chunks, and transformation of the data onto a common coordinate system grid. Through the graphical interface, users can view the details of both their data products and those in the ARM catalog and allows developers to use existing data product to build new data products. Views of the output data products include an overlay of how the design meets ARM archive’s data standards providing the user with a visual cue indicating where their output violates an archive standard. The ADI libraries access the information provided through the GUI via a Postgres database. The ADI framework and its supporting components can significantly decrease the time and cost of implementing scientific algorithms while improving the ability of scientists to disseminate their results.

  10. Project Integration Architecture

    NASA Technical Reports Server (NTRS)

    Jones, William Henry

    2008-01-01

    The Project Integration Architecture (PIA) is a distributed, object-oriented, conceptual, software framework for the generation, organization, publication, integration, and consumption of all information involved in any complex technological process in a manner that is intelligible to both computers and humans. In the development of PIA, it was recognized that in order to provide a single computational environment in which all information associated with any given complex technological process could be viewed, reviewed, manipulated, and shared, it is necessary to formulate all the elements of such a process on the most fundamental level. In this formulation, any such element is regarded as being composed of any or all of three parts: input information, some transformation of that input information, and some useful output information. Another fundamental principle of PIA is the assumption that no consumer of information, whether human or computer, can be assumed to have any useful foreknowledge of an element presented to it. Consequently, a PIA-compliant computing system is required to be ready to respond to any questions, posed by the consumer, concerning the nature of the proffered element. In colloquial terms, a PIA-compliant system must be prepared to provide all the information needed to place the element in context. To satisfy this requirement, PIA extends the previously established object-oriented- programming concept of self-revelation and applies it on a grand scale. To enable pervasive use of self-revelation, PIA exploits another previously established object-oriented-programming concept - that of semantic infusion through class derivation. By means of self-revelation and semantic infusion through class derivation, a consumer of information can inquire about the contents of all information entities (e.g., databases and software) and can interact appropriately with those entities. Other key features of PIA are listed.

  11. Integrated formal operations plan

    SciTech Connect

    Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

    1994-01-05

    The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

  12. ARM Data Integrator

    2014-02-06

    The Atmospheric Radiation Measurement (ARM) Data Integrator (ADI) streamlines the development of scientific algorithms and analysis of time-series NetCDF data, and improves the content and consistency of the output data products produced by these algorithms. The framework automates the process of retrieving and preparing data for analysis, and allows users to design output data products through a graphical interface. It also provides a modular, flexible software development architecture that scientists can use to generate C,more » Python, and IDL source code templates that embed the pre and post processing logic allowing the scientist to focus on only their science. The input data, preprocessing, and output data specifications of algorithms are defined through a graphical interface and stored in a database. ADI implements workflow for data integration and supports user access to data through a library of software modules. Data preprocess capabilities supported include automated retrieval of data from input files, merging the retrieved data into appropriately sized chunks, and transformation of the data onto a common coordinate system grid. Through the graphical interface, users can view the details of both their data products and those in the ARM catalog and allows developers to use existing data product to build new data products. Views of the output data products include an overlay of how the design meets ARM archive’s data standards providing the user with a visual cue indicating where their output violates an archive standard. The ADI libraries access the information provided through the GUI via a Postgres database. The ADI framework and its supporting components can significantly decrease the time and cost of implementing scientific algorithms while improving the ability of scientists to disseminate their results.« less

  13. Non-integrability vs. integrability in pentagram maps

    NASA Astrophysics Data System (ADS)

    Khesin, Boris; Soloviev, Fedor

    2015-01-01

    We revisit recent results on integrable cases for higher-dimensional generalizations of the 2D pentagram map: short-diagonal, dented, deep-dented, and corrugated versions, and define a universal class of pentagram maps, which are proved to possess projective duality. We show that in many cases the pentagram map cannot be included into integrable flows as a time-one map, and discuss how the corresponding notion of discrete integrability can be extended to include jumps between invariant tori. We also present a numerical evidence that certain generalizations of the integrable 2D pentagram map are non-integrable and present a conjecture for a necessary condition of their discrete integrability.

  14. Mechanistic explanation of integral calculus

    NASA Astrophysics Data System (ADS)

    Sauerheber, Richard D.

    2015-04-01

    The anatomic features of filaments, drawn through graphs of an integral F(x) and its derivative f(x), clarify why integrals automatically calculate area swept out by derivatives. Each miniscule elevation change dF on an integral, as a linear measure, equals the magnitude of square area of a corresponding vertical filament through its derivative. The sum of all dF increments combine to produce a range ΔF on the integral that equals the exact summed area swept out by the derivative over that domain. The sum of filament areas is symbolized ∫f(x)dx, where dx is the width of any filament and f(x) is the ordinal value of the derivative and thus, the intrinsic slope of the integral point dF/dx. dx displacement widths, and corresponding dF displacement heights, along the integral are not uniform and are determined by the intrinsic slope of the function at each point. Among many methods that demonstrate why integrals calculate area traced out by derivatives, this presents the physical meaning of differentials dx and dF, and how the variation in each along an integral curve explicitly computes area at any point traced by the derivative. This area is the filament width dx times its height, the ordinal value of the derivative function f(x), which is the tangent slope dF/dx on the integral. This explains thoroughly but succinctly the precise mechanism of integral calculus.

  15. “SLIMPLECTIC” INTEGRATORS: VARIATIONAL INTEGRATORS FOR GENERAL NONCONSERVATIVE SYSTEMS

    SciTech Connect

    Tsang, David; Turner, Alec; Galley, Chad R.; Stein, Leo C.

    2015-08-10

    Symplectic integrators are widely used for long-term integration of conservative astrophysical problems due to their ability to preserve the constants of motion; however, they cannot in general be applied in the presence of nonconservative interactions. In this Letter, we develop the “slimplectic” integrator, a new type of numerical integrator that shares many of the benefits of traditional symplectic integrators yet is applicable to general nonconservative systems. We utilize a fixed-time-step variational integrator formalism applied to the principle of stationary nonconservative action developed in Galley et al. As a result, the generalized momenta and energy (Noether current) evolutions are well-tracked. We discuss several example systems, including damped harmonic oscillators, Poynting–Robertson drag, and gravitational radiation reaction, by utilizing our new publicly available code to demonstrate the slimplectic integrator algorithm. Slimplectic integrators are well-suited for integrations of systems where nonconservative effects play an important role in the long-term dynamical evolution. As such they are particularly appropriate for cosmological or celestial N-body dynamics problems where nonconservative interactions, e.g., gas interactions or dissipative tides, can play an important role.

  16. "Slimplectic" Integrators: Variational Integrators for General Nonconservative Systems

    NASA Astrophysics Data System (ADS)

    Tsang, David; Galley, Chad R.; Stein, Leo C.; Turner, Alec

    2015-08-01

    Symplectic integrators are widely used for long-term integration of conservative astrophysical problems due to their ability to preserve the constants of motion; however, they cannot in general be applied in the presence of nonconservative interactions. In this Letter, we develop the “slimplectic” integrator, a new type of numerical integrator that shares many of the benefits of traditional symplectic integrators yet is applicable to general nonconservative systems. We utilize a fixed-time-step variational integrator formalism applied to the principle of stationary nonconservative action developed in Galley et al. As a result, the generalized momenta and energy (Noether current) evolutions are well-tracked. We discuss several example systems, including damped harmonic oscillators, Poynting–Robertson drag, and gravitational radiation reaction, by utilizing our new publicly available code to demonstrate the slimplectic integrator algorithm. Slimplectic integrators are well-suited for integrations of systems where nonconservative effects play an important role in the long-term dynamical evolution. As such they are particularly appropriate for cosmological or celestial N-body dynamics problems where nonconservative interactions, e.g., gas interactions or dissipative tides, can play an important role.

  17. Advanced Integrated Traction System

    SciTech Connect

    Greg Smith; Charles Gough

    2011-08-31

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step

  18. A digital long pulse integrator

    SciTech Connect

    Broesch, J.D.; Strait, E.J.; Snider, R.T.

    1996-10-01

    A prototype digital integrator with very long integration capabilities has been developed and field tested on an inductive magnetic sensor on the DIII-D Tokamak. The integrator is being developed for use on ITER with a pulse length of 1000 s, and has direct applications for other long pulse Tokamaks. Inductive magnetic sensors are routinely used on existing Tokamaks, are well understood, and are extremely robust, however, they require integration of the signal to determine the magnetic field strength. The next generation of Tokamaks, will have pulse lengths of 1000 s or longer, require integrators with drift and noise characteristics compatible with the very long pulse lengths. This paper will discuss the architecture, algorithms, and programming of the Long Pulse Integrator (LPI). Of particular interest are the noise control and the built-in offset correction techniques used in this application.

  19. Integrated Financial Management Program

    NASA Technical Reports Server (NTRS)

    Pho, Susan

    2004-01-01

    Having worked in the Employees and Commercial Payments Branch of the Financial Management Division for the past 3 summers, I have seen the many changes that have occurred within the NASA organization. As I return each summer, I find that new programs and systems have been adapted to better serve the needs of the Center and of the Agency. The NASA Agency has transformed itself the past couple years with the implementation of the Integrated Financial Management Program (IFMP). IFMP is designed to allow the Agency to improve its management of its Financial, Physical, and Human Resources through the use of multiple enterprise module applications. With my mentor, Joseph Kan, being the branch chief of the Employees and Commercial Payments Branch, I have been exposed to several modules, such as Travel Manager, WebTads, and Core Financial/SAP, which were implemented in the last couple of years under the IFMP. The implementation of these agency-wide systems has sometimes proven to be troublesome. Prior to IFMP, each NASA Center utilizes their own systems for Payroll, Travel, Accounts Payable, etc. But with the implementation of the Integrated Financial Management Program, all the "legacy" systems had to be eliminated. As a result, a great deal of enhancement and preparation work is necessary to ease the transformation from the old systems to the new. All this work occurs simultaneously; for example, e-Payroll will "go live" in several months, but a system like Travel Manager will need to have information upgraded within the system to meet the requirements set by Headquarters. My assignments this summer have given me the opportunity to become involved with such work. So far, I have been given the opportunity to participate in projects resulting from a congressional request, several bankcard reconciliations, updating routing lists for Travel Manager, updating the majordomo list for Travel Manager approvers and point of contacts, and a NASA Headquarters project involving

  20. Integrated risk management

    NASA Technical Reports Server (NTRS)

    Hunsucker, J. L.

    1993-01-01

    The purpose of this report is to first present a basis or foundation for the building of an integrated risk management plan and them to present the plan. The integration referred to is across both the temporal and the hierarchical dimensions. Complexity, consequence, and credibility seem to be driving the need for the consideration of risk. Reduction of personal bias and reproducibility of the decision making process seem to be driving the consideration of a formal risk plan. While risk can be used as either a selection tool or a control tool, this paper concentrates on the selection usage. Risk relies on stated purpose. The tightness of the definition of purpose and success is directly reflected in the definition and control of risk. Much of a risk management plan could be designed by the answers to the questions of why, what, who, when, and where. However, any plan must provide the following information about a threat or risk: likelihood, consequence, predictability, reliability, and reproducibility. While the environment at NASA is seen as warm, but not hot, for the introduction of a risk program, some encouragement is seen if the following problems are addressed: no champion, no commitment of resource, confused definitions, lack of direction and focus, a hard sell, NASA culture, many choices of assessment methods, and cost. The plan is designed to follow the normal method of doing work and is structured to follow either the work break down structure or a functional structure very well. The parts of the plan include: defining purpose and success, initial threat assessment, initial risk assessment, reconciling threats and parameters, putting part of the information down and factoring the information back into the decision process as it comes back up, and developing inferences. Two major suggestions are presented. One is to build an office of risk management to be used as a resource by managers in doing the risk process. Another is to form a pilot program to try

  1. IMP - INTEGRATED MISSION PROGRAM

    NASA Technical Reports Server (NTRS)

    Dauro, V. A.

    1994-01-01

    IMP is a simulation language that is used to model missions around the Earth, Moon, Mars, or other planets. It has been used to model missions for the Saturn Program, Apollo Program, Space Transportation System, Space Exploration Initiative, and Space Station Freedom. IMP allows a user to control the mission being simulated through a large event/maneuver menu. Up to three spacecraft may be used: a main, a target and an observer. The simulation may begin at liftoff, suborbital, or orbital. IMP incorporates a Fehlberg seventh order, thirteen evaluation Runge-Kutta integrator with error and step-size control to numerically integrate the equations of motion. The user may choose oblate or spherical gravity for the central body (Earth, Mars, Moon or other) while a spherical model is used for the gravity of an additional perturbing body. Sun gravity and pressure and Moon gravity effects are user-selectable. Earth/Mars atmospheric effects can be included. The optimum thrust guidance parameters are calculated automatically. Events/maneuvers may involve many velocity changes, and these velocity changes may be impulsive or of finite duration. Aerobraking to orbit is also an option. Other simulation options include line-of-sight communication guidelines, a choice of propulsion systems, a soft landing on the Earth or Mars, and rendezvous with a target vehicle. The input/output is in metric units, with the exception of thrust and weight which are in English units. Input is read from the user's input file to minimize real-time keyboard input. Output includes vehicle state, orbital and guide parameters, event and total velocity changes, and propellant usage. The main output is to the user defined print file, but during execution, part of the input/output is also displayed on the screen. An included FORTRAN program, TEKPLOT, will display plots on the VDT as well as generating a graphic file suitable for output on most laser printers. The code is double precision. IMP is written in

  2. Intelligent multi-sensor integrations

    NASA Technical Reports Server (NTRS)

    Volz, Richard A.; Jain, Ramesh; Weymouth, Terry

    1989-01-01

    Growth in the intelligence of space systems requires the use and integration of data from multiple sensors. Generic tools are being developed for extracting and integrating information obtained from multiple sources. The full spectrum is addressed for issues ranging from data acquisition, to characterization of sensor data, to adaptive systems for utilizing the data. In particular, there are three major aspects to the project, multisensor processing, an adaptive approach to object recognition, and distributed sensor system integration.

  3. Integrating Academic Planning and Budgeting.

    ERIC Educational Resources Information Center

    McClenney, Byron N.; Chaffee, Ellen Earle

    1985-01-01

    Argues that effective college management depends upon the budget implementing the important values of the institution. Suggests a model integrating strategic and operational planning and resource allocation. (AYC)

  4. From integrative bioethics to pseudoscience.

    PubMed

    Bracanović, Tomislav

    2012-12-01

    Integrative bioethics is a brand of bioethics conceived and propagated by a group of Croatian philosophers and other scholars. This article discusses and shows that the approach encounters several serious difficulties. In criticizing certain standard views on bioethics and in presenting their own, the advocates of integrative bioethics fall into various conceptual confusions and inconsistencies. Although presented as a project that promises to deal with moral dilemmas created by modern science and technology, integrative bioethics does not contain the slightest normativity or action-guiding capacity. Portrayed as a scientific and interdisciplinary enterprise, integrative bioethics displays a large number of pseudoscientific features that throw into doubt its overall credibility.

  5. Handbook of Feynman Path Integrals

    NASA Astrophysics Data System (ADS)

    Grosche, Christian, Steiner, Frank

    The Handbook of Feynman Path Integrals appears just fifty years after Richard Feynman published his pioneering paper in 1948 entitled "Space-Time Approach to Non-Relativistic Quantum Mechanics", in which he introduced his new formulation of quantum mechanics in terms of path integrals. The book presents for the first time a comprehensive table of Feynman path integrals together with an extensive list of references; it will serve the reader as a thorough introduction to the theory of path integrals. As a reference book, it is unique in its scope and will be essential for many physicists, chemists and mathematicians working in different areas of research.

  6. The power of product integrity.

    PubMed

    Clark, K B; Fujimoto, T

    1990-01-01

    In the dictionary, integrity means wholeness, completeness, soundness. In products, integrity is the source of sustainable competitive advantage. Products with integrity perform superbly, provide good value, and satisfy customers' expectations in every respect, including such intangibles as their look and feel. Consider this example from the auto industry. In 1987, Mazda put a racy four-wheel steering system in a five-door family hatchback. Honda introduced a comparable system in the Prelude, a sporty, two-door coupe. Most of Honda's customers installed the new technology; Mazda's system sold poorly. Potential customers felt the fit--or misfit--between the car and the new component, and they responded accordingly. Companies that consistently develop products with integrity are coherent, integrated organizations. This internal integrity is visible at the level of strategy and structure, in management and organization, and in the skills, attitudes, and behavior of individual designers, engineers, and operators. Moreover, these companies are integrated externally: customers become part of the development organization. Integrity starts with a product concept that describes the new product from the potential customer's perspective--"pocket rocket" for a sporty, subcompact car, for example. Whether the final product has integrity will depend on two things: how well the concept satisfies potential customers' wants and needs and how completely the concept has been embodied in the product's details. In the most successful development organizations, "heavyweight" product managers are responsible for leading both tasks, as well as for guiding the creation of a strong product concept.

  7. Trigonometric Integrals via Partial Fractions

    ERIC Educational Resources Information Center

    Chen, H.; Fulford, M.

    2005-01-01

    Parametric differentiation is used to derive the partial fractions decompositions of certain rational functions. Those decompositions enable us to integrate some new combinations of trigonometric functions.

  8. Integrative reviews of nursing research.

    PubMed

    Ganong, L H

    1987-02-01

    Integrative reviews of research are a valuable part of the process of creating and organizing a body of literature. It has been argued that integrative reviews should be held to the same standards of clarity, rigor, and replication as primary research. In this paper methods for conducting an integrative review are discussed. Seventeen reviews from nursing journals were examined and compared with a proposed set of criteria for reviews. The results indicated that the majority of integrative reviews in nursing fell short of primary research standards. Guidelines for conducting more rigorous reviews are presented.

  9. Integrated Tests and Evaluations

    NASA Technical Reports Server (NTRS)

    Bixby, C. J.

    2010-01-01

    NASA has developed a project plan to address issues related to UAS access to the NAS The plan is being formulated with inputs from our stakeholders. NASA will work with our stakeholders to develop ConOps and a national roadmap to determine key research technologies and policy issues to enable UAS access to the NAS. NASA will use ConOps and roadmap to either validate current NASA research investment areas and make any necessary changes to proposed UAS research portfolio. NASA will conduct integration and testing of key research areas to enable UAS access to the NAS. Use phase I to do detailed test planning for phase II Assist subelements with test planning Assist with documenting test objectives, data and facilities/infrastructure requirements, and detailed test planning Provide facilities/infrastructure to meet test requirements Provide interfaces between tools Develop, document, and execute data handling and dissemination plans Provide a test engineer to facilitate scheduling of facilities, support specific equipment and software needs, track schedule progress, and monitor changes to schedule Provide guidance for alternative facilities or equipment to mitigate risk associated with loss of availability Provide opportunities for subelements to gather data in relevant and increasingly complex environments

  10. Integrated atmospheric characterization system

    NASA Astrophysics Data System (ADS)

    Roberts, David W.; Gimmestad, Gary G.; Stewart, John M.; Whiteman, David N.; Eaton, Frank D.

    2009-05-01

    The Georgia Tech Research Institute (GTRI) is developing a transportable multi-lidar instrument known as the Integrated Atmospheric Characterization System (IACS). The system will be housed in standard shipping containers that will be transported to remote sites by tractor-trailer. IACS will comprise three lidars: a 355 nm imaging lidar for profiling refractive turbulence, a 355 nm Raman lidar for profiling water vapor, and an aerosol lidar operating at both 1.06 and 1.625 microns. All of the lidar transmit/receive optics will be co-aligned on a common mount, pointable at any elevation angle from horizontal to vertical. The entire system will be computer controlled to facilitate pointing and automatic data acquisition. The purpose of IACS is to characterize optical propagation paths during outdoor tests of electro-optical systems. The tests are anticipated to include ground-to-ground, air-to-ground, and ground-to-air scenarios, so the system must accommodate arbitrary slant paths through the atmosphere with maximum measurement ranges of 5-10 km. Elevation angle scans will be used to determine atmospheric extinction profiles at the infrared wavelengths, and data from the three wavelengths will be used to determine the aerosol Angstrom coefficient, enabling interpolation of results to other wavelengths in the 355 nm to 1.6 micron region. The imaging lidar for profiling refractive turbulence is based on a previously-reported project known as Range Profiles of Turbulence.

  11. Glacial integrative modelling.

    PubMed

    Ganopolski, Andrey

    2003-09-15

    Understanding the mechanisms of past climate changes requires modelling of the complex interaction between all major components of the Earth system: atmosphere, ocean, cryosphere, lithosphere and biosphere. This paper reviews attempts at such an integrative approach to modelling climate changes during the glacial age. In particular, the roles of different factors in shaping glacial climate are compared based on the results of simulations with an Earth-system model of intermediate complexity, CLIMBER-2. It is shown that ice sheets, changes in atmospheric compositions, vegetation cover, and reorganization of the ocean thermohaline circulation play important roles in glacial climate changes. Another example of this approach is the modelling of two major types of abrupt glacial climate changes: Dansgaard-Oeschger and Heinrich events. Our results corroborate some of the early proposed mechanisms, which relate abrupt climate changes to the internal instability of the ocean thermohaline circulation and ice sheets. At the same time, it is shown that realistic representation of the temporal evolution of the palaeoclimatic background is crucial to simulate observed features of the glacial abrupt climate changes.

  12. Integral geometry and holography

    SciTech Connect

    Czech, Bartlomiej; Lamprou, Lampros; McCandlish, Samuel; Sully, James

    2015-10-27

    We present a mathematical framework which underlies the connection between information theory and the bulk spacetime in the AdS3/CFT2 correspondence. A key concept is kinematic space: an auxiliary Lorentzian geometry whose metric is defined in terms of conditional mutual informations and which organizes the entanglement pattern of a CFT state. When the field theory has a holographic dual obeying the Ryu-Takayanagi proposal, kinematic space has a direct geometric meaning: it is the space of bulk geodesics studied in integral geometry. Lengths of bulk curves are computed by kinematic volumes, giving a precise entropic interpretation of the length of any bulk curve. We explain how basic geometric concepts -- points, distances and angles -- are reflected in kinematic space, allowing one to reconstruct a large class of spatial bulk geometries from boundary entanglement entropies. In this way, kinematic space translates between information theoretic and geometric descriptions of a CFT state. As an example, we discuss in detail the static slice of AdS3 whose kinematic space is two-dimensional de Sitter space.

  13. Pavlov and integrative physiology.

    PubMed

    Smith, G P

    2000-09-01

    Ivan Petrovich Pavlov was the first physiologist to win the Nobel Prize. The Prize was given in 1904 for his research on the neural control of salivary, gastric, and pancreatic secretion. A major reason for the success and novelty of his research was the use of unanesthetized dogs surgically prepared with chronic fistulas or gastric pouches that permitted repeated experiments in the same animal for months. Pavlov invented this chronic method because of the limitations he perceived in the use of acute anesthetized animals for investigating physiological systems. By introducing the chronic method and by showing its experimental advantages, Pavlov founded modern integrative physiology. This paper reviews Pavlov's journey from his birthplace in a provincial village in Russia to Stockholm to receive the Prize. It begins with childhood influences, describes his training and mentors, summarizes the major points of his research by reviewing his book Lectures on the Work of the Digestive Glands, and discusses his views on the relationship between physiology and medicine.

  14. Integrated Current Limiter

    NASA Astrophysics Data System (ADS)

    Pappalardo, S.; Alfonso, M. M.; Mirabella, I. B.

    2011-10-01

    The LCL has been extensively used in ESA scientific satellites and since a few years ago is being also the baseline device for earth observation satellites such as CRYOSAT 1 and 2, SENTINAL 1, 2 and 3, EARTWATCH, etc. It seems that the use of this LCL is also being considered as an alternative to fuse approach for commercial telecommunication satellites. Scope of this document is to provide a technical description of the Integrated Current Limiter device (shortly ICL later on) developed inside the domain of ESTECContract22049-09-NL-A Twith STMicroelectronics s.r.l. (ref. Invitation to Tender AO/1-5784/08/NL/A T). The design of the ICL device takes into account both ESA and power electronics designer's experience. This experience is more than 25 years long in Europe. The ICL design has been leaded in order to be fully compliant with the applicable specification issued by ESA and the major European power electronics manufacturers that have participated in its edition.

  15. Integral geometry and holography

    DOE PAGES

    Czech, Bartlomiej; Lamprou, Lampros; McCandlish, Samuel; Sully, James

    2015-10-27

    We present a mathematical framework which underlies the connection between information theory and the bulk spacetime in the AdS3/CFT2 correspondence. A key concept is kinematic space: an auxiliary Lorentzian geometry whose metric is defined in terms of conditional mutual informations and which organizes the entanglement pattern of a CFT state. When the field theory has a holographic dual obeying the Ryu-Takayanagi proposal, kinematic space has a direct geometric meaning: it is the space of bulk geodesics studied in integral geometry. Lengths of bulk curves are computed by kinematic volumes, giving a precise entropic interpretation of the length of any bulkmore » curve. We explain how basic geometric concepts -- points, distances and angles -- are reflected in kinematic space, allowing one to reconstruct a large class of spatial bulk geometries from boundary entanglement entropies. In this way, kinematic space translates between information theoretic and geometric descriptions of a CFT state. As an example, we discuss in detail the static slice of AdS3 whose kinematic space is two-dimensional de Sitter space.« less

  16. Integral Textile Ceramic Structures

    NASA Astrophysics Data System (ADS)

    Marshall, David B.; Cox, Brian N.

    2008-08-01

    A new paradigm for ceramic composite structural components enables functionality in heat exchange, transpiration, detailed shape, and thermal strain management that significantly exceeds the prior art. The paradigm is based on the use of three-dimensional fiber reinforcement that is tailored to the specific shape, stress, and thermal requirements of a structural application and therefore generally requires innovative textile methods for each realization. Key features include the attainment of thin skins (less than 1 mm) that are nevertheless structurally robust, transpiration holes formed without cutting fibers, double curvature, compliant integral attachment to other structures that avoids thermal stress buildup, and microcomposite ceramic matrices that minimize spalling and allow the formation of smooth surfaces. All these features can be combined into structures of very varied gross shape and function, using a wide range of materials such as all-oxide systems and SiC and carbon fibers in SiC matrices. Illustrations are drawn from rocket nozzles, thermal protection systems, and gas turbine engines. The new design challenges that arise for such material/structure systems are being met by specialized computational modeling that departs significantly in the representation of materials behavior from that used in conventional finite element methods.

  17. Integrated system checkout report

    SciTech Connect

    Not Available

    1991-08-14

    The planning and preparation phase of the Integrated Systems Checkout Program (ISCP) was conducted from October 1989 to July 1991. A copy of the ISCP, DOE-WIPP 90--002, is included in this report as an appendix. The final phase of the Checkout was conducted from July 10, 1991, to July 23, 1991. This phase exercised all the procedures and equipment required to receive, emplace, and retrieve contact handled transuranium (CH TRU) waste filled dry bins. In addition, abnormal events were introduced to simulate various equipment failures, loose surface radioactive contamination events, and personnel injury. This report provides a detailed summary of each days activities during this period. Qualification of personnel to safely conduct the tasks identified in the procedures and the abnormal events were verified by observers familiar with the Bin-Scale CH TRU Waste Test requirements. These observers were members of the staffs of Westinghouse WID Engineering, QA, Training, Health Physics, Safety, and SNL. Observers representing a number of DOE departments, the state of new Mexico, and the Defense Nuclear Facilities Safety Board observed those Checkout activities conducted during the period from July 17, 1991, to July 23, 1991. Observer comments described in this report are those obtained from the staff member observers. 1 figs., 1 tab.

  18. Integrated Urban Nutrient Management

    NASA Astrophysics Data System (ADS)

    Nhapi, I.; Veenstra, S.; Siebel, M. A.; Gijzen, H. J.

    Most cities, especially from the developing countries, are facing serious problems with the management of nutrients, necessitating an urgent review of current waste management systems. Whilst highly efficient technologies are available, the inclusion of these in a well-thought out and systematic approach is necessary to contain the nutrient influxes and outfluxes from towns. Five intervention measures are proposed in this paper. The first is to manage the use and generation of nutrients by drastically minimising water consumption and employing other cleaner production approaches. The second deals with the optimal reuse of nutrients and water at the smallest possible level, like at the household and on-plot level. The second option is to covert the waste into something useful for reuse, and, where not possible, to something which is envi- ronmentally neutral. This involves treatment, but applying technologies that makes the best use of side products via reuse. Where the first three options will have failed, two least preferred options could be used. Waste can be dispersed or diluted to enhance self-purification capacities of downstream water bodies. The last option is to store the wastewater for some parts of the year when there is water shortage to allow for polishing during the standing period. The success of urban nutrient planning requires an integrated approach, proving specific solutions to specific situations. This, in turn, requires appropriate institutional responses.

  19. Integrated Management Tracking System

    SciTech Connect

    Garrett, Terrance

    2000-03-30

    The Integrated Management Tracking System (IMTS) is a "Web Enabled" Client/Server Business application that provides for the Identification and Resolution of commitments, situations, events and problems. The IMTS engine is written with Microsoft Active Server Pages (ASP) for IIS4. The system provides for reporting, entering, editing, closing and administration over a Intranet, Extranet or Internet. This Application facilitates: Electronic assignment, acceptance and tracking to completion. Email notifications of assigned action. Establishment of Due Dates. Electronic search and retrieval based on keywords in combination with user specified database parameters (Document Type, Date Ranges, etc.). Coded for Trending and Reporting. User selected reports. Various levels of access for reports and administration. The "Server" side of this application consists of a Microsoft Access database running on a NT Server with Internet Information Server (IIS). As the "Client" side of the application runs on any Web browser, this solution is a cost effective, user friendly application that lends itself to organizations not physically colocated in one location providing information immediately available to everyone at once.

  20. Glacial integrative modelling.

    PubMed

    Ganopolski, Andrey

    2003-09-15

    Understanding the mechanisms of past climate changes requires modelling of the complex interaction between all major components of the Earth system: atmosphere, ocean, cryosphere, lithosphere and biosphere. This paper reviews attempts at such an integrative approach to modelling climate changes during the glacial age. In particular, the roles of different factors in shaping glacial climate are compared based on the results of simulations with an Earth-system model of intermediate complexity, CLIMBER-2. It is shown that ice sheets, changes in atmospheric compositions, vegetation cover, and reorganization of the ocean thermohaline circulation play important roles in glacial climate changes. Another example of this approach is the modelling of two major types of abrupt glacial climate changes: Dansgaard-Oeschger and Heinrich events. Our results corroborate some of the early proposed mechanisms, which relate abrupt climate changes to the internal instability of the ocean thermohaline circulation and ice sheets. At the same time, it is shown that realistic representation of the temporal evolution of the palaeoclimatic background is crucial to simulate observed features of the glacial abrupt climate changes. PMID:14558899

  1. Fermionic correlators from integrability

    NASA Astrophysics Data System (ADS)

    Caetano, João; Fleury, Thiago

    2016-09-01

    We study three-point functions of single-trace operators in the {s}{u}(1Big|1) sector of planar {N}=4 SYM borrowing several tools based on Integrability. In the most general configuration of operators in this sector, we have found a determinant expression for the tree-level structure constants. We then compare the predictions of the recently proposed hexagon program against all available data. We have obtained a match once additional sign factors are included when the two hexagon form-factors are assembled together to form the structure constants. In the particular case of one BPS and two non-BPS operators we managed to identify the relevant form-factors with a domain wall partition function of a certain six-vertex model. This partition function can be explicitly evaluated and factorizes at all loops. In addition, we use this result to compute the structure constants and show that at strong coupling in the so-called BMN regime, its leading order contribution has a determinant expression.

  2. Integrated imaging sensors

    NASA Astrophysics Data System (ADS)

    Anderson, John S.; Kostrzewa, Thomas; Cook, Lacy G.; Baker, G.; Radford, William A.; Jack, Michael D.; Finch, A.; Kennedy, Adam; Kojiro, J. K.; Murphy, Daniel F.; Ray, Michael; Wyles, Richard; Lohrmann, Dieter; Williams, G.; Janesick, J.; Dosluoglu, T.; Reinheimer, A.

    2001-10-01

    The objectives of the Integrated Imaging Sensors (I2S) Program are rtwofold. The first is to develop and deliver a rifle sight containing a single aperture and optical path for receiving, combining, and viewing radiation from the separate infrared (IR) and visible bands in a single image simultaneously. The second is to develop a sensor array sensitive in the radiation band spanning approximately from 0.4 μm to 1.7 μm by "fusing" indium-gallium-arsenic material onto silicon charge coupled devices. The ability to coincidentally and simultaneously form images from these two separate radiation bands is expected to significantly improve the detection and identification of objects from the case where only one radiation band is employed. Additionally, extending the cutoff of the visible band from 0.9 μm to 1.7 μm is expected to enhance viewing in this band as there is more available light, and further lessons the exacting requirement of desigining nearly noise free detectors.

  3. Pavlov and integrative physiology.

    PubMed

    Smith, G P

    2000-09-01

    Ivan Petrovich Pavlov was the first physiologist to win the Nobel Prize. The Prize was given in 1904 for his research on the neural control of salivary, gastric, and pancreatic secretion. A major reason for the success and novelty of his research was the use of unanesthetized dogs surgically prepared with chronic fistulas or gastric pouches that permitted repeated experiments in the same animal for months. Pavlov invented this chronic method because of the limitations he perceived in the use of acute anesthetized animals for investigating physiological systems. By introducing the chronic method and by showing its experimental advantages, Pavlov founded modern integrative physiology. This paper reviews Pavlov's journey from his birthplace in a provincial village in Russia to Stockholm to receive the Prize. It begins with childhood influences, describes his training and mentors, summarizes the major points of his research by reviewing his book Lectures on the Work of the Digestive Glands, and discusses his views on the relationship between physiology and medicine. PMID:10956230

  4. Integrated photonic quantum walks

    NASA Astrophysics Data System (ADS)

    Gräfe, Markus; Heilmann, René; Lebugle, Maxime; Guzman-Silva, Diego; Perez-Leija, Armando; Szameit, Alexander

    2016-10-01

    Over the last 20 years quantum walks (QWs) have gained increasing interest in the field of quantum information science and processing. In contrast to classical walkers, quantum objects exhibit intrinsic properties like non-locality and non-classical many-particle correlations, which renders QWs a versatile tool for quantum simulation and computation as well as for a deeper understanding of genuine quantum mechanics. Since they are highly controllable and hardly interact with their environment, photons seem to be ideally suited quantum walkers. In order to study and exploit photonic QWs, lattice structures that allow low loss coherent evolution of quantum states are demanded. Such requirements are perfectly met by integrated optical waveguide devices that additionally allow a substantial miniaturization of experimental settings. Moreover, by utilizing the femtosecond direct laser writing technique three-dimensional waveguide structures are capable of analyzing QWs also on higher dimensional geometries. In this context, advances and findings of photonic QWs are discussed in this review. Various concepts and experimental results are presented covering, such as different quantum transport regimes, the Boson sampling problem, and the discrete fractional quantum Fourier transform.

  5. Integrated Management Tracking System

    2000-03-30

    The Integrated Management Tracking System (IMTS) is a "Web Enabled" Client/Server Business application that provides for the Identification and Resolution of commitments, situations, events and problems. The IMTS engine is written with Microsoft Active Server Pages (ASP) for IIS4. The system provides for reporting, entering, editing, closing and administration over a Intranet, Extranet or Internet. This Application facilitates: Electronic assignment, acceptance and tracking to completion. Email notifications of assigned action. Establishment of Due Dates. Electronicmore » search and retrieval based on keywords in combination with user specified database parameters (Document Type, Date Ranges, etc.). Coded for Trending and Reporting. User selected reports. Various levels of access for reports and administration. The "Server" side of this application consists of a Microsoft Access database running on a NT Server with Internet Information Server (IIS). As the "Client" side of the application runs on any Web browser, this solution is a cost effective, user friendly application that lends itself to organizations not physically colocated in one location providing information immediately available to everyone at once.« less

  6. Integrated Test Approach

    NASA Technical Reports Server (NTRS)

    Cotton, Will; Liechty, John

    2015-01-01

    This paper describes a testing methodology undertaken on the Facilities Development and Operations Contract (FDOC) by Lockheed Martin. The methodology was defined with the intent of reducing project schedule time to enable NASA's Johnson Space Center (JSC) to be able to deliver the Mission Control Center (MCC) 21 project as quickly as possible. 21 represents the 21st century where NASA JSC is updating its control center with new technology and operational concepts in order to support NASA customers wanting to use control center assets to support space vehicle operations. In collaboration with the NASA customer, a new test concept was conceived early during MCC21 project planning with the goal of reducing project delivery time. One enabler that could help reduce delivery time was testing. Within the project, testing was performed by two entities, software development responsible for subsystem testing and system test responsible for system integration testing. The MCC21 project took a deliberate review of testing to determine how it could be performed differently to realize an overall reduction in test time to support the goal of a more rapid project delivery.

  7. Benzene upgrading reformer integration

    SciTech Connect

    Harandi, M.N.; Owen, H.

    1990-08-21

    This patent describes a continuous process for providing an integrated product recovery system for a primary catalytic hydrocarbon reforming reactor and a secondary catalytic olefins oligomerization-alkylation reactor. It comprises: withdrawing reformer effluent from primary reformer reactor; separating in a primary separation zone the reformer effluent into a primary overhead stream comprising noncondensible light paraffins and a primary bottoms stream comprising C{sub 6} to C{sub 8} aromatic hydrocarbons; withdrawing oligomerization effluent from secondary oligomerization-alkylation reactor; separating in a secondary separation zone the oligomerization effluent into a secondary overhead stream; adding the primary bottoms stream and the secondary bottoms stream to the fractionation column; withdrawing from the top of the fractionation column a stream comprising C{sub 4} {minus} hydrocarbons; withdrawing from the bottom of the fractionation column a stream comprising C{sub 5} + hydrocarbons; adding the C{sub 5} + hydrocarbon stream to the reboiler unit; withdrawing from the reboiler unit a vapor stream comprising benzene and a liquid stream comprising C{sub 5} + hydrocarbons boiling in the gasoline range; adding at least a portion of the vapor stream comprising benzene to the secondary catalytic olefins oligomerization-alkylation reactor; and adding a light olefins feedstream.

  8. Strategic Integration: The Practical Politics of Integrated Research in Context

    ERIC Educational Resources Information Center

    van Kerkhoff, Lorrae

    2005-01-01

    Designing an integrative research program requires that research leaders negotiate a balance between the scientific interest of research and the practical interests of non-scientific partners. This paper examines the ways integrated research is formally categorised, and analyses the tangible expressions of the practical politics involved in…

  9. [Generation continuity and integration].

    PubMed

    Zakhvatkin, Iu A

    2008-01-01

    Transformation of the cyclic morphoprocesses in Protista toward the terminal-cyclic morphoprocesses in Metazoa had lead to integration of the fomer's life circles into the latter's ontogenesis and began to supply the newly emerging ecosystems with the regular income of mortomasses. According to the palintomic hypothesis of A.A. Zakhvatkin, it was the egg that became a means of the metazoan generation continuity, and not the half set of organells acquired by descendants of a divided maternal cell in Protozoa. Origin of Metazoa and of their ontogenesis was accomplished by hypetrophic distomy and subsequent palintomic division of the protist parental cell, these processes being comparable to the ovogenesis and ovocyte division in the Metazoa. Division process in the most primitive metazoans, Leptolida and Calcarea, retained certains features of its palintomic nature that are clear in the Ctenophora, the latter though specific being most similar in this respect to the spongs and not to the Coelenterata whith whom they were united in the same phylum formerly. The ovogenesis perfection controlled by the maternal organism and leading to an increment of the nuclear-plasmic tension due to enrichment of egg with the yolk, promoted the embrionization of development and formation of the egg morphogenetic environment providing for the earlier formation processes without participation of the parental recombined genotypes. With all this, far earlier appearence of symmetry elements of definitive forms is embriogenesis along the ascending trend from the lower Metazoa to the most advanced insects. The unordered correspondence of the polarity axis of egg and the oral-aboral axis of blastula-like larva (1) is replaced by protaxony (2) in which these axes coincide, all formation processes reaching their perfection in the homoquadrant spiral division of annelids, which became a means of ovoplasma segregation. Afterward, a herequadrant division and plagioxony are developed in the course

  10. Integrated clinical information system.

    PubMed

    Brousseau, G

    1995-01-01

    SIDOCI (Système Informatisé de DOnnées Cliniques Intégrées) is a Canadian joint venture introducing newly-operating paradigms into hospitals. The main goal of SIDOCI is to maintain the quality of care in todayUs tightening economy. SIDOCI is a fully integrated paperless patient-care system which automates and links all information about a patient. Data is available on-line and instantaneously to doctors, nurses, and support staff in the format that best suits their specific requirements. SIDOCI provides a factual and chronological summary of the patient's progress by drawing together clinical information provided by all professionals working with the patient, regardless of their discipline, level of experience, or physical location. It also allows for direct entry of the patient's information at the bedside. Laboratory results, progress notes, patient history and graphs are available instantaneously on screen, eliminating the need for physical file transfers. The system, incorporating a sophisticated clinical information database, an intuitive graphical user interface, and customized screens for each medical discipline, guides the user through standard procedures. Unlike most information systems created for the health care industry, SIDOCI is longitudinal, covering all aspects of the health care process through its link to various vertical systems already in place. A multidisciplinary team has created a clinical dictionary that provides the user with most of the information she would normally use: symptoms, signs, diagnoses, allergies, medications, interventions, etc. This information is structured and displayed in such a manner that health care professionals can document the clinical situation at the touch of a finger. The data is then encoded into the patient's file. Once encoded, the structured data is accessible for research, statistics, education, and quality assurance. This dictionary complies with national and international nomenclatures. It also

  11. Integrated clinical information system.

    PubMed

    Brousseau, G

    1995-01-01

    SIDOCI (Système Informatisé de DOnnées Cliniques Intégrées) is a Canadian joint venture introducing newly-operating paradigms into hospitals. The main goal of SIDOCI is to maintain the quality of care in todayUs tightening economy. SIDOCI is a fully integrated paperless patient-care system which automates and links all information about a patient. Data is available on-line and instantaneously to doctors, nurses, and support staff in the format that best suits their specific requirements. SIDOCI provides a factual and chronological summary of the patient's progress by drawing together clinical information provided by all professionals working with the patient, regardless of their discipline, level of experience, or physical location. It also allows for direct entry of the patient's information at the bedside. Laboratory results, progress notes, patient history and graphs are available instantaneously on screen, eliminating the need for physical file transfers. The system, incorporating a sophisticated clinical information database, an intuitive graphical user interface, and customized screens for each medical discipline, guides the user through standard procedures. Unlike most information systems created for the health care industry, SIDOCI is longitudinal, covering all aspects of the health care process through its link to various vertical systems already in place. A multidisciplinary team has created a clinical dictionary that provides the user with most of the information she would normally use: symptoms, signs, diagnoses, allergies, medications, interventions, etc. This information is structured and displayed in such a manner that health care professionals can document the clinical situation at the touch of a finger. The data is then encoded into the patient's file. Once encoded, the structured data is accessible for research, statistics, education, and quality assurance. This dictionary complies with national and international nomenclatures. It also

  12. Integrated Multilayer Insulation

    NASA Technical Reports Server (NTRS)

    Dye, Scott

    2009-01-01

    Integrated multilayer insulation (IMLI) is being developed as an improved alternative to conventional multilayer insulation (MLI), which is more than 50 years old. A typical conventional MLI blanket comprises between 10 and 120 metallized polymer films separated by polyester nets. MLI is the best thermal- insulation material for use in a vacuum, and is the insulation material of choice for spacecraft and cryogenic systems. However, conventional MLI has several disadvantages: It is difficult or impossible to maintain the desired value of gap distance between the film layers (and consequently, it is difficult or impossible to ensure consistent performance), and fabrication and installation are labor-intensive and difficult. The development of IMLI is intended to overcome these disadvantages to some extent and to offer some additional advantages over conventional MLI. The main difference between IMLI and conventional MLI lies in the method of maintaining the gaps between the film layers. In IMLI, the film layers are separated by what its developers call a micro-molded discrete matrix, which can be loosely characterized as consisting of arrays of highly engineered, small, lightweight, polymer (typically, thermoplastic) frames attached to, and placed between, the film layers. The term "micro-molded" refers to both the smallness of the frames and the fact that they are fabricated in a process that forms precise small features, described below, that are essential to attainment of the desired properties. The term "discrete" refers to the nature of the matrix as consisting of separate frames, in contradistinction to a unitary frame spanning entire volume of an insulation blanket.

  13. Avoiding integrity land mines.

    PubMed

    Heineman, Ben W

    2007-04-01

    How does a large multinational keep thousands of employees, operating in hundreds of countries, honest in a high-pressure business environment? As the chief legal officer at General Electric for nearly 20 years, Ben Heineman was part of the senior management group that sought to do just that--to make sure its executives and employees are moved to do the right thing as strongly as they are motivated to make their numbers. Heineman describes a set of systems that combine the communication of clear expectations with oversight, deterrence, and incentives. Nowhere are the expectations higher--and the sanctions more powerful--than for top executives. Heineman recounts example after example of senior leaders terminated for ethical lapses even when the business consequences of doing so were painful--and even when they had no direct knowledge of the violations occurring on their watch. To make expectations clear throughout the company, GE has systematically sought to set uniform standards that stay well ahead of current legal developments and stakeholders' changing attitudes about corporate accountability. Responsibility for implementing those standards, which are embedded in GE's operating practices, rests with the business leaders in the field. Oversight is both methodical and multifaceted. A host of auditing and assessment systems enables GE to compare the performance of its various business units against one another and against industry benchmarks. Perhaps the most powerful is the company's ombudsman system, which doesn't just allow but requires employees to lodge concerns. Failures to report into the system or up the line, or retaliation in any form, are firing offenses. The current intense focus on board-level governance has missed the point, Heineman argues. It is time to shift the debate from board oversight of the CEO to how top company leaders can most effectively infuse integrity at all levels of the corporation.

  14. Integrated electrochromic aperture diaphragm

    NASA Astrophysics Data System (ADS)

    Deutschmann, T.; Oesterschulze, E.

    2014-05-01

    In the last years, the triumphal march of handheld electronics with integrated cameras has opened amazing fields for small high performing optical systems. For this purpose miniaturized iris apertures are of practical importance because they are essential to control both the dynamic range of the imaging system and the depth of focus. Therefore, we invented a micro optical iris based on an electrochromic (EC) material. This material changes its absorption in response to an applied voltage. A coaxial arrangement of annular rings of the EC material is used to establish an iris aperture without need of any mechanical moving parts. The advantages of this device do not only arise from the space-saving design with a thickness of the device layer of 50μm. But it also benefits from low power consumption. In fact, its transmission state is stable in an open circuit, phrased memory effect. Only changes of the absorption require a voltage of up to 2 V. In contrast to mechanical iris apertures the absorption may be controlled on an analog scale offering the opportunity for apodization. These properties make our device the ideal candidate for battery powered and space-saving systems. We present optical measurements concerning control of the transmitted intensity and depth of focus, and studies dealing with switching times, light scattering, and stability. While the EC polymer used in this study still has limitations concerning color and contrast, the presented device features all functions of an iris aperture. In contrast to conventional devices it offers some special features. Owing to the variable chemistry of the EC material, its spectral response may be adjusted to certain applications like color filtering in different spectral regimes (UV, optical range, infrared). Furthermore, all segments may be switched individually to establish functions like spatial Fourier filtering or lateral tunable intensity filters.

  15. Body Integrity Identity Disorder

    PubMed Central

    Blom, Rianne M.; Hennekam, Raoul C.; Denys, Damiaan

    2012-01-01

    Introduction Body Integrity Identity Disorder (BIID) is a rare, infrequently studied and highly secretive condition in which there is a mismatch between the mental body image and the physical body. Subjects suffering from BIID have an intense desire to amputate a major limb or severe the spinal cord in order to become paralyzed. Aim of the study is to broaden the knowledge of BIID amongst medical professionals, by describing all who deal with BIID. Methods Somatic, psychiatric and BIID characteristic data were collected from 54 BIID individuals using a detailed questionnaire. Subsequently, data of different subtypes of BIID (i.e. wish for amputation or paralyzation) were evaluated. Finally, disruption in work, social and family life due to BIID in subjects with and without amputation were compared. Results Based on the subjects' reports we found that BIID has an onset in early childhood. The main rationale given for their desire for body modification is to feel complete or to feel satisfied inside. Somatic and severe psychiatric co-morbidity is unusual, but depressive symptoms and mood disorders can be present, possibly secondary to the enormous distress BIID puts upon a person. Amputation and paralyzation variant do not differ in any clinical variable. Surgery is found helpful in all subjects who underwent amputation and those subjects score significantly lower on a disability scale than BIID subjects without body modification. Conclusions The amputation variant and paralyzation variant of BIID are to be considered as one of the same condition. Amputation of the healthy body part appears to result in remission of BIID and an impressive improvement of quality of life. Knowledge of and respect for the desires of BIID individuals are the first steps in providing care and may decrease the huge burden they experience. PMID:22514657

  16. Avoiding integrity land mines.

    PubMed

    Heineman, Ben W

    2007-04-01

    How does a large multinational keep thousands of employees, operating in hundreds of countries, honest in a high-pressure business environment? As the chief legal officer at General Electric for nearly 20 years, Ben Heineman was part of the senior management group that sought to do just that--to make sure its executives and employees are moved to do the right thing as strongly as they are motivated to make their numbers. Heineman describes a set of systems that combine the communication of clear expectations with oversight, deterrence, and incentives. Nowhere are the expectations higher--and the sanctions more powerful--than for top executives. Heineman recounts example after example of senior leaders terminated for ethical lapses even when the business consequences of doing so were painful--and even when they had no direct knowledge of the violations occurring on their watch. To make expectations clear throughout the company, GE has systematically sought to set uniform standards that stay well ahead of current legal developments and stakeholders' changing attitudes about corporate accountability. Responsibility for implementing those standards, which are embedded in GE's operating practices, rests with the business leaders in the field. Oversight is both methodical and multifaceted. A host of auditing and assessment systems enables GE to compare the performance of its various business units against one another and against industry benchmarks. Perhaps the most powerful is the company's ombudsman system, which doesn't just allow but requires employees to lodge concerns. Failures to report into the system or up the line, or retaliation in any form, are firing offenses. The current intense focus on board-level governance has missed the point, Heineman argues. It is time to shift the debate from board oversight of the CEO to how top company leaders can most effectively infuse integrity at all levels of the corporation. PMID:17432157

  17. Integrated health programmes.

    PubMed

    Knowles, J

    1995-04-01

    Over a period of 10 years, a hospital in rural Africa slowly built an integrated primary and secondary health care program to the point where it has more than 40 elements. In its initial stage (1982-84), hospital staff and community participants were trained, the number of mobile clinics was increased, community participation was sought, and health education was emphasized. During 1985-86, 92 village health committees were organized with 70 trained Village Health Workers (VHWs). This led to a rapid increase in vaccination rates, the use of oral rehydration therapy, and training of traditional birth attendants. In 1987-88, 14 VHW were trained to use basic medical kits and distribute medicines. By 1990, 18,000 of the 72,000 outpatient treatments were administered by VHWs. In 1987, the hospital made a community diagnosis and increased the size of its advisory board (which became 60% female). Because the community identified food, water, and poverty as its priorities, the hospital took steps to improve the food supply, the water supply, and the financial position of the women. In 1989-90, the primary health care (PHC) project added the components of family planning, a weaning food production unit, food coupons, food for work, grain banks, a trust fund, literacy classes, health stamps, a mobile malnutrition clinic, subsidized fertilizer and seed, low-cost care for victims of AIDS, new malaria treatment schedules, and a housing association. The PHC program has resulted in a reduction in under-five deaths from the national average of 330/1000 to 145/1000 (other areas have reduced deaths to 270-300/1000. The program is also becoming increasingly cost-effective, costing about 6 pounds per capita over 10 years for a population of 50,000. Country-wide implementation of the PHC program would require only 30% of the present health budget.

  18. Arcjet system integration development

    NASA Technical Reports Server (NTRS)

    Zafran, Sidney

    1994-01-01

    Compatibility between an arcjet propulsion system and a communications satellite was verified by testing a Government-furnished, 1.4 kW hydrazine arcjet system with the FLTSATCOM qualification model satellite in a 9.1-meter (30-foot) diameter thermal-vacuum test chamber. Background pressure was maintained at 10(exp -5) torr during arcjet operation by cryopumping the thruster exhaust with an array of 5 K liquid helium cooled panels. Power for the arcjet system was obtained from the FLTSATCOM battery simulator. Spacecraft telemetry was monitored during each thruster firing period. No changes in telemetry data attributable to arcjet operation were detected in any of the tests. Electromagnetic compatibility data obtained included radiated emission measurements, conducted emission measurements, and cable coupling measurements. Significant noise was observed at lower frequencies. Above 500 MHz, radiated emissions were generally within limits, indicating that communication links at S-band and higher frequencies will not be affected. Other test data taken with a diagnostic array of calorimeters, radiometers, witness plates, and a residual gas analyzer evidenced compatible operation, and added to the data base for arcjet system integration. Two test series were conducted. The first series only included the arcjet and diagnostic array operating at approximately 0.1 torr background pressure. The second series added the qualification model spacecraft, a solar panel, and the helium cryopanels. Tests were conducted at 0.1 torr and 10(exp-5) torr. The arcjet thruster was canted 20 degrees relative to the solar panel axis, typical of the configuration used for stationkeeping thrusters on geosynchronous communications satellites.

  19. GLobal Integrated Design Environment

    NASA Technical Reports Server (NTRS)

    Kunkel, Matthew; McGuire, Melissa; Smith, David A.; Gefert, Leon P.

    2011-01-01

    The GLobal Integrated Design Environment (GLIDE) is a collaborative engineering application built to resolve the design session issues of real-time passing of data between multiple discipline experts in a collaborative environment. Utilizing Web protocols and multiple programming languages, GLIDE allows engineers to use the applications to which they are accustomed in this case, Excel to send and receive datasets via the Internet to a database-driven Web server. Traditionally, a collaborative design session consists of one or more engineers representing each discipline meeting together in a single location. The discipline leads exchange parameters and iterate through their respective processes to converge on an acceptable dataset. In cases in which the engineers are unable to meet, their parameters are passed via e-mail, telephone, facsimile, or even postal mail. The result of this slow process of data exchange would elongate a design session to weeks or even months. While the iterative process remains in place, software can now exchange parameters securely and efficiently, while at the same time allowing for much more information about a design session to be made available. GLIDE is written in a compilation of several programming languages, including REALbasic, PHP, and Microsoft Visual Basic. GLIDE client installers are available to download for both Microsoft Windows and Macintosh systems. The GLIDE client software is compatible with Microsoft Excel 2000 or later on Windows systems, and with Microsoft Excel X or later on Macintosh systems. GLIDE follows the Client-Server paradigm, transferring encrypted and compressed data via standard Web protocols. Currently, the engineers use Excel as a front end to the GLIDE Client, as many of their custom tools run in Excel.

  20. IAC - INTEGRATED ANALYSIS CAPABILITY

    NASA Technical Reports Server (NTRS)

    Frisch, H. P.

    1994-01-01

    The objective of the Integrated Analysis Capability (IAC) system is to provide a highly effective, interactive analysis tool for the integrated design of large structures. With the goal of supporting the unique needs of engineering analysis groups concerned with interdisciplinary problems, IAC was developed to interface programs from the fields of structures, thermodynamics, controls, and system dynamics with an executive system and database to yield a highly efficient multi-disciplinary system. Special attention is given to user requirements such as data handling and on-line assistance with operational features, and the ability to add new modules of the user's choice at a future date. IAC contains an executive system, a data base, general utilities, interfaces to various engineering programs, and a framework for building interfaces to other programs. IAC has shown itself to be effective in automatic data transfer among analysis programs. IAC 2.5, designed to be compatible as far as possible with Level 1.5, contains a major upgrade in executive and database management system capabilities, and includes interfaces to enable thermal, structures, optics, and control interaction dynamics analysis. The IAC system architecture is modular in design. 1) The executive module contains an input command processor, an extensive data management system, and driver code to execute the application modules. 2) Technical modules provide standalone computational capability as well as support for various solution paths or coupled analyses. 3) Graphics and model generation interfaces are supplied for building and viewing models. Advanced graphics capabilities are provided within particular analysis modules such as INCA and NASTRAN. 4) Interface modules provide for the required data flow between IAC and other modules. 5) User modules can be arbitrary executable programs or JCL procedures with no pre-defined relationship to IAC. 6) Special purpose modules are included, such as MIMIC (Model

  1. RTI Essential Components Integrity Worksheet

    ERIC Educational Resources Information Center

    National Center on Response to Intervention, 2011

    2011-01-01

    The Response to Intervention (RTI) Essential Components Integrity Rubric and the RTI Essential Components Integrity Worksheet are for use by individuals responsible for monitoring the school-level fidelity of Response to Intervention (RTI) implementation. They may also be used by schools for self-appraisal; however, they were not designed for…

  2. Nursing Faculty and Academic Integrity

    ERIC Educational Resources Information Center

    Wilson, Cecilia E.

    2013-01-01

    Insufficient information exists regarding the process influencing faculty decisions, specifically in the area of maintaining academic integrity in an online environment. The purpose of the study was to explore the experiences and decision-making process of nursing faculty related to maintaining academic integrity in an online environment. The…

  3. Austin ISD. Integrated Lesson Plans.

    ERIC Educational Resources Information Center

    East Texas State Univ., Commerce. Educational Development and Training Center.

    This packet contains 14 lesson plans for integrated academic and vocational education courses. Lesson plans for the following courses are included: integrated physics and principles of technology; algebra and principles of technology; principles of technology, language arts, and economics; physics and industrial electronics; physics and…

  4. Support Systems for Treatment Integrity

    ERIC Educational Resources Information Center

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    2016-01-01

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately operationalized treatment integrity procedures…

  5. Berezin integrals and Poisson processes

    NASA Astrophysics Data System (ADS)

    DeAngelis, G. F.; Jona-Lasinio, G.; Sidoravicius, V.

    1998-01-01

    We show that the calculation of Berezin integrals over anticommuting variables can be reduced to the evaluation of expectations of functionals of Poisson processes via an appropriate Feynman-Kac formula. In this way the tools of ordinary analysis can be applied to Berezin integrals and, as an example, we prove a simple upper bound. Possible applications of our results are briefly mentioned.

  6. Integrating planning, execution, and learning

    NASA Technical Reports Server (NTRS)

    Kuokka, Daniel R.

    1989-01-01

    To achieve the goal of building an autonomous agent, the usually disjoint capabilities of planning, execution, and learning must be used together. An architecture, called MAX, within which cognitive capabilities can be purposefully and intelligently integrated is described. The architecture supports the codification of capabilities as explicit knowledge that can be reasoned about. In addition, specific problem solving, learning, and integration knowledge is developed.

  7. Data Integrity: Beware of Viruses

    ERIC Educational Resources Information Center

    Bergren, Martha Dewey

    2004-01-01

    School nurses and health office employees are the creators and caretakers of legal documentation. School nurses have an ethical and legal obligation to protect the integrity of electronic student health records. Although there are many threats to data integrity, from inadequate hardware to electrical surges, one of the most pervasive threats to…

  8. Integrating Technology with Architectural Needs

    ERIC Educational Resources Information Center

    Elmasry, Sarah

    2009-01-01

    Researchers at the Center of High Performance Learning Technologies (CHPLE), Virginia Tech, conducted a study investigating issues related to integration of learning technologies with architectural systems in contemporary learning environments. The study is qualitative in nature, and focuses on integration patterns of learning technologies with…

  9. Integrating the Curricula: A Collection.

    ERIC Educational Resources Information Center

    Fogarty, Robin, Ed.

    In response to the search for ways to create forms of schooling that are more holistic and natural, and more integrated and interwoven, this collection of articles pulls together elements of the multifaceted concept of curriculum integration. Divided into six sections, the chapters explore the reasons and rationale for moving toward more holistic…

  10. Energy Systems Integration Facility Overview

    SciTech Connect

    Arvizu, Dan; Chistensen, Dana; Hannegan, Bryan; Garret, Bobi; Kroposki, Ben; Symko-Davies, Martha; Post, David; Hammond, Steve; Kutscher, Chuck; Wipke, Keith

    2014-02-28

    The U.S. Department of Energy's Energy Systems Integration Facility (ESIF) is located at the National Renewable Energy Laboratory is the right tool, at the right time... a first-of-its-kind facility that addresses the challenges of large-scale integration of clean energy technologies into the energy systems that power the nation.

  11. High frequency integrated MOS filters

    NASA Technical Reports Server (NTRS)

    Peterson, C.

    1990-01-01

    Several techniques exist for implementing integrated MOS filters. These techniques fit into the general categories of sampled and tuned continuous-time filters. Advantages and limitations of each approach are discussed. This paper focuses primarily on the high frequency capabilities of MOS integrated filters.

  12. Snakes: An Integrated Unit Plan.

    ERIC Educational Resources Information Center

    Lawrence, Lisa

    This document presents an integrated unit plan on snakes targeting second grade students. Objectives of the unit include developing concepts of living things, understanding the contribution and importance of snakes to the environment, and making connections between different disciplines. The unit integrates the topic of snakes into the areas of…

  13. Achieving Curriculum-Integrated Computing.

    ERIC Educational Resources Information Center

    Mudd, Samuel; Wilson, William

    1987-01-01

    This discussion of strategies for integrating computers into an undergraduate curriculum on an institution-wide basis focuses on quality instructional documents and the diffusion model, which is used to incorporate innovations in a user population. The plan at Gettysburg College for curriculum-integrated computing (CIC) based on the diffusion…

  14. Energy Systems Integration Facility Overview

    ScienceCinema

    Arvizu, Dan; Chistensen, Dana; Hannegan, Bryan; Garret, Bobi; Kroposki, Ben; Symko-Davies, Martha; Post, David; Hammond, Steve; Kutscher, Chuck; Wipke, Keith

    2016-07-12

    The U.S. Department of Energy's Energy Systems Integration Facility (ESIF) is located at the National Renewable Energy Laboratory is the right tool, at the right time... a first-of-its-kind facility that addresses the challenges of large-scale integration of clean energy technologies into the energy systems that power the nation.

  15. Integrative holistic medicine in Minnesota.

    PubMed

    Torkelson, Carolyn J; Manahan, Bill

    2009-05-01

    Minnesota has played a leading role in the integrative holistic medicine movement in the United States for more than 2 decades. This article defines integrative holistic medicine and describes how it is practiced. It also discusses the reasons why institutions and providers here and elsewhere in the country have embraced this approach to patient care.

  16. The Symposium on Integration Issues.

    ERIC Educational Resources Information Center

    Meyers, Mary, Ed.

    This symposium of the ad hoc committee on integration of the Ontario (Canada) Teachers of English as a Second Language (TESL) reports educators' concerns with providing adequate support for immigrant and refugee students, maintaining the integrity, voice, and visibility of ESL education in school boards, and advocating and providing guidelines for…

  17. Tools for Ensuring Program Integrity.

    ERIC Educational Resources Information Center

    Office of Student Financial Assistance (ED), Washington, DC.

    This training document for financial assistance professionals discusses ensuring program integrity in student financial aid and describes some tools for ensuring internal and external program integrity. The training focuses on these tools and resources: (1) the Federal Student Aid (FSA) Schools Portal; (2) the Information for Financial Aid…

  18. A Zero Property for Integrals

    ERIC Educational Resources Information Center

    Abu-Saris, Raghib M.

    2009-01-01

    In this note, we show that if the integral of a continuous function, h, vanishes over an interval [a, b], then so does the integral of w(x)h(x) over [a, c] for some c in (a, b), where w is a monotonic increasing (decreasing) function on [a, b] with w(a) is non-negative (non-positive).

  19. Integrating Academic and Vocational Skills.

    ERIC Educational Resources Information Center

    Walling, Susan

    The Allied Health Certificate Program at Massachusetts' Bunker Hill Community College has been successfully integrating academic and vocational education since 1986. The integration of English as a Second Language, academic education, and occupational training was a direct response to requests from business and industry for a competitive…

  20. An Integrated Cardiovascular Teaching Laboratory.

    ERIC Educational Resources Information Center

    Peterson, Nils S.; And Others

    1985-01-01

    Describes computer strategies designed to emphasize teaching of an integrative view of cardiovascular physiology. They include: (1) a group of simulated laboratories which emphasize an explicit integration of ideas; (2) fault-finding exercises in which those ideas are put to use; and (3) a novel testing device for measuring student progress. (JN)

  1. Designing the Knowledge Integration Environment.

    ERIC Educational Resources Information Center

    Linn, Marcia C.

    2000-01-01

    Explains Knowledge Integration Environment (KIE) activities which are designed to promote lifelong science learning. Describes the partnership process that guided the design as well as the Scaffolded Knowledge Integration (SKI) framework that gave the partnership a head start on creating effective materials. (Contains 52 references.) (Author/YDS)

  2. Integrated control-structure design

    NASA Technical Reports Server (NTRS)

    Hunziker, K. Scott; Kraft, Raymond H.; Bossi, Joseph A.

    1991-01-01

    A new approach for the design and control of flexible space structures is described. The approach integrates the structure and controller design processes thereby providing extra opportunities for avoiding some of the disastrous effects of control-structures interaction and for discovering new, unexpected avenues of future structural design. A control formulation based on Boyd's implementation of Youla parameterization is employed. Control design parameters are coupled with structural design variables to produce a set of integrated-design variables which are selected through optimization-based methodology. A performance index reflecting spacecraft mission goals and constraints is formulated and optimized with respect to the integrated design variables. Initial studies have been concerned with achieving mission requirements with a lighter, more flexible space structure. Details of the formulation of the integrated-design approach are presented and results are given from a study involving the integrated redesign of a flexible geostationary platform.

  3. Retroviral DNA Integration Directed by HIV Integration Protein in Vitro

    NASA Astrophysics Data System (ADS)

    Bushman, Frederic D.; Fujiwara, Tamio; Craigie, Robert

    1990-09-01

    Efficient retroviral growth requires integration of a DNA copy of the viral RNA genome into a chromosome of the host. As a first step in analyzing the mechanism of integration of human immunodeficiency virus (HIV) DNA, a cell-free system was established that models the integration reaction. The in vitro system depends on the HIV integration (IN) protein, which was partially purified from insect cells engineered to express IN protein in large quantities. Integration was detected in a biological assay that scores the insertion of a linear DNA containing HIV terminal sequences into a λ DNA target. Some integration products generated in this assay contained five-base pair duplications of the target DNA at the recombination junctions, a characteristic of HIV integration in vivo; the remaining products contained aberrant junctional sequences that may have been produced in a variation of the normal reaction. These results indicate that HIV IN protein is the only viral protein required to insert model HIV DNA sequences into a target DNA in vitro.

  4. Integrals and integral equations in linearized wing theory

    NASA Technical Reports Server (NTRS)

    Lomax, Harvard; Heaslet, Max A; Fuller, Franklyn B

    1951-01-01

    The formulas of subsonic and supersonic wing theory for source, doublet, and vortex distributions are reviewed and a systematic presentation is provided which relates these distributions to the pressure and to the vertical induced velocity in the plane of the wing. It is shown that care must be used in treating the singularities involved in the analysis and that the order of integration is not always reversible. Concepts suggested by the irreversibility of order of integration are shown to be useful in the inversion of singular integral equations when operational techniques are used. A number of examples are given to illustrate the methods presented, attention being directed to supersonic flight speed.

  5. Boolean integration. [applied to switching network synthesis

    NASA Technical Reports Server (NTRS)

    Tucker, J. H.; Tapia, M. A.; Bennett, A. W.

    1976-01-01

    This paper presents the necessary and sufficient conditions for a given differential expression to be compatibly integrable and it presents the necessary and sufficient conditions for a given expression to be exactly integrable. Methods are given for integrating a differential expression when it is exactly integrable and when it is compatibly integrable. The physical interpretation is given of the integral of order k, of a differential expression, and it is shown that any differential expression of the proper form is integrable by parts.

  6. Integrating values in job descriptions.

    PubMed

    Craig, R P

    1987-12-01

    The Mission Services Division of the Sisters of Charity of the Incarnate Word Health Care Corporation, Houston, has established training sessions to help various facilities develop criteria-based job descriptions that integrate values. A major problem with traditional job descriptions is that they do not contain enough information for value integration to occur. Each facet of the job description--the responsibility statement, the task statement, and the standard--can integrate the facilities' values in explicit and implicit ways. Such integration reduces the possibility of a supervisor arbitrarily defining the qualitative aspects of how an employee performs the job and provides a better method for evaluating the quality of the employee's performance. The first step in value integration is to identify the organization's values. Next, illustrative behaviors are identified to emphasize value integration in both activity-based task statements and results-based standards. The final step is to integrate the values in the job description, which makes the value operational and bridges the gap between commitment to values and behavior that exemplifies those values. Although values cannot be measured as objectively as the successful accomplishment of a procedure with a specified method of measurement, evaluation of values is not fruitless. When the employee and supervisor agree on specific qualitative aspects of patient care or other tasks, the consistency of the qualitative aspects of the job can be evaluated.

  7. NASA UAS Integration into the NAS Project: Human Systems Integration

    NASA Technical Reports Server (NTRS)

    Shively, Jay

    2016-01-01

    This presentation provides an overview of the work the Human Systems Integration (HSI) sub-project has done on detect and avoid (DAA) displays while working on the UAS (Unmanned Aircraft System) Integration into the NAS project. The most recent simulation on DAA interoperability with Traffic Collision Avoidance System (TCAS) is discussed in the most detail. The relationship of the work to the larger UAS community and next steps are also detailed.

  8. Integrative medicine in america.

    PubMed

    2012-07-01

    2011 年,致力于改善医护服务的 慈善组织 Bravewell Collaborative 委托进行了一项调查,以确定目前 美国的综合医学实施情况。29 个 发展完善的综合医学中心参与了本 调 查,本调查旨在了解患者人数 及最常诊治的病症、所采用的核心 实践及护理模式、服务的付费方 式、护理所包含的价值和原则以及 推动成功实施的主要因素。本调查(美国的综合医学:综 合医学在美国临床中心的实施情 况)刊发于本期《Global Advances in Health and Medicine》中,于 2012 年 2 月首次发布。多数相关 研究调查的是所使用的补充康复 手段的类型以及使用者,而不是 使用原因,最重要的是,没有调 查与之共同使用的手段。这是首 次深入调查实际综合临床实践, 就此而言,数据揭示了患者的整 体(身体、心智及精神)治疗情 况、协同使用传统与补充干预治 疗的方法、不同医生之间的合作 方式以及核心价值的实施方法。 我们非常高兴能与全球观众分享 这份调查。2012 年 3 月,Bravewell Collaborative召开了一项会议,参 加这项旨在了解现况的调查的 29 个中心的负责人一同到 会。Bravewell 的初衷是,让临床 与管理负责人互通有无,分享最 佳实践以及探讨深入采用综合医 学的方法。每年慢性健康问题造成美国经 济损失超过 10,000 亿美元,所以 我们有必要找出最有效的方法治疗 和预防最普遍的病症。综合医学能 多方面地迎合这一诉求。加利福尼 亚拉荷亚的斯可普斯综合医学中心 (Scripps Center for Integrative Medicine) 医学博士 Mimi Guarneri 在会上进行主旨发言时说得很中 肯:“ά们不可能照搬对心脏病病 发患者的治疗模式,来治疗试图防 止突发心脏病的患者。 这完全行 不通。应该摒弃这种做法。”

  9. Numerical integration of subtraction terms

    NASA Astrophysics Data System (ADS)

    Seth, Satyajit; Weinzierl, Stefan

    2016-06-01

    Numerical approaches to higher-order calculations often employ subtraction terms, both for the real emission and the virtual corrections. These subtraction terms have to be added back. In this paper we show that at NLO the real subtraction terms, the virtual subtraction terms, the integral representations of the field renormalization constants and—in the case of initial-state partons—the integral representation for the collinear counterterm can be grouped together to give finite integrals, which can be evaluated numerically. This is useful for an extension towards next-to-next-to-leading order.

  10. Integrated residential photovoltaic array development

    NASA Technical Reports Server (NTRS)

    Shepard, N. F., Jr.

    1981-01-01

    The design details of an optimized integrated residential photovoltaic module/array are presented. This selected design features a waterproofing and mounting scheme which was devised to simplify the installation procedures by the avoidance of complex gasketed or caulked joints, while still maintaining a high confidence that the watertight integrity of the integral roofing surface will be achieved for the design lifetime of the system. The production and installation costs for the selected module/array design are reported for a range of annual production rates as a function of the cost of solar cells.

  11. Fully Integrating the Design Process

    SciTech Connect

    T.A. Bjornard; R.S. Bean

    2008-03-01

    The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

  12. Grand Challenges of Enterprise Integration

    SciTech Connect

    Brosey, W.D; Neal, R.E.; Marks, D.

    2001-04-01

    Enterprise Integration connects and combines people, processes, systems, and technologies to ensure that the right people and the right processes have the right information and the right resources at the right time. A consensus roadmap for Technologies for Enterprise Integration was created as part of an industry/government/academia partnership in the Integrated Manufacturing Technology Initiative (IMTI). Two of the grand challenges identified by the roadmapping effort will be addressed here--Customer Responsive Enterprises and Totally Connected Enterprises. Each of these challenges is briefly discussed as to the current state of industry and the future vision as developed in the roadmap.

  13. The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

    NASA Technical Reports Server (NTRS)

    McGhee, D. S.

    2006-01-01

    Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

  14. Integrating the Physically Handicapped Child.

    ERIC Educational Resources Information Center

    Bleck, Eugene E.

    1979-01-01

    The problems of integrating the physically handicapped child are discussed including descriptions of major handicapping conditions, a discussion of the development of mainstreaming programs, suggestions for successful programs, and comments on the financial implications of mainstreaming. (MM)

  15. Central Fan Integrated Ventilation Systems

    SciTech Connect

    2009-05-12

    This information sheet describes one example of a ventilation system design, a central fan integrated supply (CFIS) system, a mechanical ventilation and pollutant source control to ensure that there is reasonable indoor air quality inside the house.

  16. Scattering theory with path integrals

    SciTech Connect

    Rosenfelder, R.

    2014-03-15

    Starting from well-known expressions for the T-matrix and its derivative in standard nonrelativistic potential scattering, I rederive recent path-integral formulations due to Efimov and Barbashov et al. Some new relations follow immediately.

  17. Integrating Mathematics and Social Issues

    ERIC Educational Resources Information Center

    Harrell, Gregory K.

    2007-01-01

    This article illustrates how to integrate mathematics with social issues. Social issues discussed in the newspaper provide a rich context for connecting mathematical activities to the real world. The sample activities focus on measurement concepts. (Contains 2 figures.)

  18. Numerical integration of analytic functions

    NASA Astrophysics Data System (ADS)

    Milovanović, Gradimir V.; Tošić, Dobrilo ð.; Albijanić, Miloljub

    2012-09-01

    A weighted generalized N-point Birkhoff-Young quadrature of interpolatory type for numerical integration of analytic functions is considered. Special cases of such quadratures with respect to the generalized Gegenbauer weight function are derived.

  19. Integrating Mathematics and Composition Instruction.

    ERIC Educational Resources Information Center

    Kirtland, Joseph; Hoh, Pau-San

    2002-01-01

    Describes the development of an integrated approach for teaching mathematics and writing to freshmen. The goals are to strengthen mathematical skills, develop writing competencies, and foster interdisciplinary awareness. (Author/MM)

  20. SUPERSITES INTEGRATED RELATIONAL DATABASE (SIRD)

    EPA Science Inventory

    As part of EPA's Particulate Matter (PM) Supersites Program (Program), the University of Maryland designed and developed the Supersites Integrated Relational Database (SIRD). Measurement data in SIRD include comprehensive air quality data from the 7 Supersite program locations f...

  1. INTEGRATION OF POLLUTION PREVENTION TOOLS

    EPA Science Inventory

    A prototype computer-based decision support system was designed to provide small businesses with an integrated pollution prevention methodology. Preliminary research involved compilation of an inventory of existing pollution prevention tools (i.e., methodologies, software, etc.),...

  2. Integrals of the Ising Class

    SciTech Connect

    Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

    2006-06-01

    From an experimental-mathematical perspective we analyze"Ising-class" integrals. Our experimental results involvedextreme-precision, multidimensional quadrature on intricate integrands;thus, highly parallel computation was required.

  3. CADAT integrated circuit mask analysis

    NASA Technical Reports Server (NTRS)

    1981-01-01

    CADAT System Mask Analysis Program (MAPS2) is automated software tool for analyzing integrated-circuit mask design. Included in MAPS2 functions are artwork verification, device identification, nodal analysis, capacitance calculation, and logic equation generation.

  4. Demonstration of integrated optimization software

    SciTech Connect

    2008-01-01

    NeuCO has designed and demonstrated the integration of five system control modules using its proprietary ProcessLink{reg_sign} technology of neural networks, advanced algorithms and fuzzy logic to maximize performance of coal-fired plants. The separate modules control cyclone combustion, sootblowing, SCR operations, performance and equipment maintenance. ProcessLink{reg_sign} provides overall plant-level integration of controls responsive to plant operator and corporate criteria. Benefits of an integrated approach include NOx reduction improvement in heat rate, availability, efficiency and reliability; extension of SCR catalyst life; and reduced consumption of ammonia. All translate into cost savings. As plant complexity increases through retrofit, repowering or other plant modifications, this integrated process optimization approach will be an important tool for plant operators. 1 fig., 1 photo.

  5. Physically Important Integrals Without Calculus

    ERIC Educational Resources Information Center

    Reif, F.; Larkin, Jill H.

    1976-01-01

    Develops a geometric solution to be used with spatial integrals needed for finding electric and magnetic fields. The method is used in the calculation of the electric fields due to a uniformly charged plane, line and sphere. (CP)

  6. Vehicle Integrated Propulsion Research Tests

    NASA Technical Reports Server (NTRS)

    Lekki, John D.; Hunter, Gary W.; Simon, Don; Meredith, Roger; Wrbanek, John; Woike, Mark; Tokars, Roger; Guffanti, Marianne; Lyall, Eric

    2013-01-01

    Overview of the Vehicle Integrated Propulsion Research Tests in the Vehicle Systems Safety Technologies project. This overview covers highlights of the completed VIPR I and VIPR II tests and also covers plans for the VIPR III test.

  7. On an Integral with Two Branch Points

    ERIC Educational Resources Information Center

    de Oliveira, E. Capelas; Chiacchio, Ary O.

    2006-01-01

    The paper considers a class of real integrals performed by using a convenient integral in the complex plane. A complex integral containing a multi-valued function with two branch points is transformed into another integral containing a pole and a unique branch point. As a by-product we obtain a new class of integrals which can be calculated in a…

  8. Research Integrity of Individual Scientist

    NASA Astrophysics Data System (ADS)

    Haklak, Rockbill

    We are discussing about many aspects of research integrity of individual scientist, who faces the globalization of research ethics in the traditional culture and custom of Japan. Topics are scientific misconduct (fabrication, falsification, and plagiarism) in writing paper and presenting research results. Managements of research material, research record, grant money, authorship, and conflict of interest are also analyzed and discussed. Finally, we make 5 recommendations to improve research integrity in Japan.

  9. Integrated inertial stellar attitude sensor

    NASA Technical Reports Server (NTRS)

    Brady, Tye M. (Inventor); Kourepenis, Anthony S. (Inventor); Wyman, Jr., William F. (Inventor)

    2007-01-01

    An integrated inertial stellar attitude sensor for an aerospace vehicle includes a star camera system, a gyroscope system, a controller system for synchronously integrating an output of said star camera system and an output of said gyroscope system into a stream of data, and a flight computer responsive to said stream of data for determining from the star camera system output and the gyroscope system output the attitude of the aerospace vehicle.

  10. Integrable discrete PT symmetric model.

    PubMed

    Ablowitz, Mark J; Musslimani, Ziad H

    2014-09-01

    An exactly solvable discrete PT invariant nonlinear Schrödinger-like model is introduced. It is an integrable Hamiltonian system that exhibits a nontrivial nonlinear PT symmetry. A discrete one-soliton solution is constructed using a left-right Riemann-Hilbert formulation. It is shown that this pure soliton exhibits unique features such as power oscillations and singularity formation. The proposed model can be viewed as a discretization of a recently obtained integrable nonlocal nonlinear Schrödinger equation.

  11. Integrated Broadband Quantum Cascade Laser

    NASA Technical Reports Server (NTRS)

    Mansour, Kamjou (Inventor); Soibel, Alexander (Inventor)

    2016-01-01

    A broadband, integrated quantum cascade laser is disclosed, comprising ridge waveguide quantum cascade lasers formed by applying standard semiconductor process techniques to a monolithic structure of alternating layers of claddings and active region layers. The resulting ridge waveguide quantum cascade lasers may be individually controlled by independent voltage potentials, resulting in control of the overall spectrum of the integrated quantum cascade laser source. Other embodiments are described and claimed.

  12. Advanced integrated safeguards at Barnwell

    SciTech Connect

    Bambas, K.J.; Barnes, L.D.

    1980-06-01

    The development and initial performance testing of an advanced integrated safeguards system at the Barnwell Nuclear Fuel Plant (BNFP) is described. The program concentrates on the integration and coordination of physical security and nuclear materials control and accounting at a single location. Hardware and software for this phase have been installed and are currently being evaluated. The AGNS/DOE program is now in its third year of development at the BNFP.

  13. Cuba: Multidimensional numerical integration library

    NASA Astrophysics Data System (ADS)

    Hahn, Thomas

    2016-08-01

    The Cuba library offers four independent routines for multidimensional numerical integration: Vegas, Suave, Divonne, and Cuhre. The four algorithms work by very different methods, and can integrate vector integrands and have very similar Fortran, C/C++, and Mathematica interfaces. Their invocation is very similar, making it easy to cross-check by substituting one method by another. For further safeguarding, the output is supplemented by a chi-square probability which quantifies the reliability of the error estimate.

  14. Integrable matrix theory: Level statistics

    NASA Astrophysics Data System (ADS)

    Scaramazza, Jasen A.; Shastry, B. Sriram; Yuzbashyan, Emil A.

    2016-09-01

    We study level statistics in ensembles of integrable N ×N matrices linear in a real parameter x . The matrix H (x ) is considered integrable if it has a prescribed number n >1 of linearly independent commuting partners Hi(x ) (integrals of motion) "]Hi(x ) ,Hj(x ) ]">H (x ) ,Hi(x ) =0 , for all x . In a recent work [Phys. Rev. E 93, 052114 (2016), 10.1103/PhysRevE.93.052114], we developed a basis-independent construction of H (x ) for any n from which we derived the probability density function, thereby determining how to choose a typical integrable matrix from the ensemble. Here, we find that typical integrable matrices have Poisson statistics in the N →∞ limit provided n scales at least as logN ; otherwise, they exhibit level repulsion. Exceptions to the Poisson case occur at isolated coupling values x =x0 or when correlations are introduced between typically independent matrix parameters. However, level statistics cross over to Poisson at O (N-0.5) deviations from these exceptions, indicating that non-Poissonian statistics characterize only subsets of measure zero in the parameter space. Furthermore, we present strong numerical evidence that ensembles of integrable matrices are stationary and ergodic with respect to nearest-neighbor level statistics.

  15. Construction of integrated case environments.

    PubMed

    Losavio, Francisca; Matteo, Alfredo; Pérez, María

    2003-01-01

    The main goal of Computer-Aided Software Engineering (CASE) technology is to improve the entire software system development process. The CASE approach is not merely a technology; it involves a fundamental change in the process of software development. The tendency of the CASE approach, technically speaking, is the integration of tools that assist in the application of specific methods. In this sense, the environment architecture, which includes the platform and the system's hardware and software, constitutes the base of the CASE environment. The problem of tools integration has been proposed for two decades. Current integration efforts emphasize the interoperability of tools, especially in distributed environments. In this work we use the Brown approach. The environment resulting from the application of this model is called a federative environment, focusing on the fact that this architecture pays special attention to the connections among the components of the environment. This approach is now being used in component-based design. This paper describes a concrete experience in civil engineering and architecture fields, for the construction of an integrated CASE environment. A generic architectural framework based on an intermediary architectural pattern is applied to achieve the integration of the different tools. This intermediary represents the control perspective of the PAC (Presentation-Abstraction-Control) style, which has been implemented as a Mediator pattern and it has been used in the interactive systems domain. In addition, a process is given to construct the integrated CASE. PMID:15916171

  16. PREFACE Integrability and nonlinear phenomena Integrability and nonlinear phenomena

    NASA Astrophysics Data System (ADS)

    Gómez-Ullate, David; Lombardo, Sara; Mañas, Manuel; Mazzocco, Marta; Nijhoff, Frank; Sommacal, Matteo

    2010-10-01

    Back in 1967, Clifford Gardner, John Greene, Martin Kruskal and Robert Miura published a seminal paper in Physical Review Letters which was to become a cornerstone in the theory of integrable systems. In 2006, the authors of this paper received the AMS Steele Prize. In this award the AMS pointed out that `In applications of mathematics, solitons and their descendants (kinks, anti-kinks, instantons, and breathers) have entered and changed such diverse fields as nonlinear optics, plasma physics, and ocean, atmospheric, and planetary sciences. Nonlinearity has undergone a revolution: from a nuisance to be eliminated, to a new tool to be exploited.' From this discovery the modern theory of integrability bloomed, leading scientists to a deep understanding of many nonlinear phenomena which is by no means reachable by perturbation methods or other previous tools from linear theories. Nonlinear phenomena appear everywhere in nature, their description and understanding is therefore of great interest both from the theoretical and applicative point of view. If a nonlinear phenomenon can be represented by an integrable system then we have at our disposal a variety of tools to achieve a better mathematical description of the phenomenon. This special issue is largely dedicated to investigations of nonlinear phenomena which are related to the concept of integrability, either involving integrable systems themselves or because they use techniques from the theory of integrability. The idea of this special issue originated during the 18th edition of the Nonlinear Evolution Equations and Dynamical Systems (NEEDS) workshop, held at Isola Rossa, Sardinia, Italy, 16-23 May 2009 (http://needs-conferences.net/2009/). The issue benefits from the occasion offered by the meeting, in particular by its mini-workshops programme, and contains invited review papers and contributed papers. It is worth pointing out that there was an open call for papers and all contributions were peer reviewed

  17. Discrete Coherent State Path Integrals

    NASA Astrophysics Data System (ADS)

    Marchioro, Thomas L., II

    1990-01-01

    The quantum theory provides a fundamental understanding of the physical world; however, as the number of degrees of freedom rises, the information required to specify quantum wavefunctions grows geometrically. Because basis set expansions mirror this geometric growth, a strict practical limit on quantum mechanics as a numerical tool arises, specifically, three degrees of freedom or fewer. Recent progress has been made utilizing Feynman's Path Integral formalism to bypass this geometric growth and instead calculate time -dependent correlation functions directly. The solution of the Schrodinger equation is converted into a large dimensional (formally infinite) integration, which can then be attacked with Monte Carlo techniques. To date, work in this area has concentrated on developing sophisticated mathematical algorithms for evaluating the highly oscillatory integrands occurring in Feynman Path Integrals. In an alternative approach, this work demonstrates two formulations of quantum dynamics for which the number of mathematical operations does not scale geometrically. Both methods utilize the Coherent State basis of quantum mechanics. First, a localized coherent state basis set expansion and an approximate short time propagator are developed. Iterations of the short time propagator lead to the full quantum dynamics if the coherent state basis is sufficiently dense along the classical phase space path of the system. Second, the coherent state path integral is examined in detail. For a common class of Hamiltonians, H = p^2/2 + V( x) the path integral is reformulated from a phase space-like expression into one depending on (q,dot q). It is demonstrated that this new path integral expression contains localized damping terms which can serve as a statistical weight for Monte Carlo evaluation of the integral--a process which scales approximately linearly with the number of degrees of freedom. Corrections to the traditional coherent state path integral, inspired by a

  18. Quantum integrability of quadratic Killing tensors

    SciTech Connect

    Duval, C.; Valent, G.

    2005-05-01

    Quantum integrability of classical integrable systems given by quadratic Killing tensors on curved configuration spaces is investigated. It is proven that, using a 'minimal' quantization scheme, quantum integrability is ensured for a large class of classic examples.

  19. Wilber's Integral Theory and Dossey's Theory of Integral Nursing: An Examination of Two Integral Approaches in Nursing Scholarship.

    PubMed

    Shea, Linda; Frisch, Noreen

    2016-09-01

    The purpose of this article is to examine Dossey's theory of integral nursing in relation to its major theoretical source, Wilber's integral theory. Although several nursing scholars have written about integral theory in relation to nursing scholarship and practice, Dossey's theory of integral nursing may be influencing how nurses take up integral theory in a significant way due to an extensive outreach in the holistic nursing community. Despite this wide circulation, the theory of integral nursing has yet to be reviewed in the nursing literature. This article (a) compares Dossey's theory of integral nursing with Wilber's integral theory and (b) contrasts Dossey's integral approach with another integral approach used by other scholars of integral theory.

  20. Integrative Medicine and Complementary and Alternative Therapies

    MedlinePlus

    ... 000 this month to find cures. Loading... Integrative Medicine and Complementary and Alternative Therapies Integrative Medicine and Complementary and Alternative Therapies SHARE: Print Glossary ...

  1. Extension of vector-valued integral polynomials

    NASA Astrophysics Data System (ADS)

    Carando, Daniel; Lassalle, Silvia

    2005-07-01

    We study the extendibility of integral vector-valued polynomials on Banach spaces. We prove that an X-valued Pietsch-integral polynomial on E extends to an X-valued Pietsch-integral polynomial on any space F containing E, with the same integral norm. This is not the case for Grothendieck-integral polynomials: they do not always extend to X-valued Grothendieck-integral polynomials. However, they are extendible to X-valued polynomials. The Aron-Berner extension of an integral polynomial is also studied. A canonical integral representation is given for domains not containing l1.

  2. Perturbative Methods in Path Integration

    NASA Astrophysics Data System (ADS)

    Johnson-Freyd, Theodore Paul

    This dissertation addresses a number of related questions concerning perturbative "path" integrals. Perturbative methods are one of the few successful ways physicists have worked with (or even defined) these infinite-dimensional integrals, and it is important as mathematicians to check that they are correct. Chapter 0 provides a detailed introduction. We take a classical approach to path integrals in Chapter 1. Following standard arguments, we posit a Feynman-diagrammatic description of the asymptotics of the time-evolution operator for the quantum mechanics of a charged particle moving nonrelativistically through a curved manifold under the influence of an external electromagnetic field. We check that our sum of Feynman diagrams has all desired properties: it is coordinate-independent and well-defined without ultraviolet divergences, it satisfies the correct composition law, and it satisfies Schrodinger's equation thought of as a boundary-value problem in PDE. Path integrals in quantum mechanics and elsewhere in quantum field theory are almost always of the shape ∫ f es for some functions f (the "observable") and s (the "action"). In Chapter 2 we step back to analyze integrals of this type more generally. Integration by parts provides algebraic relations between the values of ∫ (-) es for different inputs, which can be packaged into a Batalin--Vilkovisky-type chain complex. Using some simple homological perturbation theory, we study the version of this complex that arises when f and s are taken to be polynomial functions, and power series are banished. We find that in such cases, the entire scheme-theoretic critical locus (complex points included) of s plays an important role, and that one can uniformly (but noncanonically) integrate out in a purely algebraic way the contributions to the integral from all "higher modes," reducing ∫ f es to an integral over the critical locus. This may help explain the presence of analytic continuation in questions like the

  3. Aguas!: An Introduction to Hispanic Plays.

    ERIC Educational Resources Information Center

    Saldana, Johnny

    1996-01-01

    Notes that the number of Hispanic children in schools is growing. Presents an annotated bibliography of 46 Hispanic plays, sources of information, and organizations dealing with Hispanic themes and ideas. (PA)

  4. Agua Arriba--Up the Stream.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Migratory Child Div.

    Designed for migratory agricultural workers whose children attended Florida schools during the winter, this directory lists and describes summer educational programs outside the state of Florida. The programs are said to provide trained teachers and other personnel, planned recreational and vocational training, and enrichment programs designed for…

  5. Nanophotonics for integrated information systems

    NASA Astrophysics Data System (ADS)

    Levy, Uriel; Tetz, Kevin; Rokitski, Rostislav; Kim, Hyu-Chang; Tsai, Chia-Ho; Abashin, Maxim; Pang, Lin; Zezhad, Maziar; Fainman, Yeshaiahu

    2006-02-01

    Optical technology plays an increasingly important role in numerous information system applications, including optical communications, storage, signal processing, biology, medicine, and sensing. As optical technology develops, there is a growing need to develop scalable and reliable photonic integration technologies. These include the development of passive and active optical components that can be integrated into functional optical circuits and systems, including filters, electrically or optically controlled switching fabrics, optical sources, detectors, amplifiers, etc. We explore the unique capabilities and advantages of nanotechnology in developing next generation integrated photonic information systems. Our approach includes design, modeling and simulations of selected components and devices, their nanofabrication, followed by validation via characterization and testing of the fabricated devices. The latter exploits our recently constructed near field complex amplitude imaging tool. The understanding of near field interactions in nanophotonic devices and systems is a crucial step as these interactions provide a variety of functionalities useful for optical systems integration. Furthermore, near-field optical devices facilitate miniaturization, and simultaneously enhance multifunctionality, greatly increasing the functional complexity per unit volume of the photonic system. Since the optical properties of near-field materials are controlled by the geometry, there is flexibility in the choice of constituent materials, facilitating the implementation of a wide range of devices using compatible materials for ease of fabrication and integration.

  6. NASA Integrated Space Communications Network

    NASA Technical Reports Server (NTRS)

    Tai, Wallace; Wright, Nate; Prior, Mike; Bhasin, Kul

    2012-01-01

    The NASA Integrated Network for Space Communications and Navigation (SCaN) has been in the definition phase since 2010. It is intended to integrate NASA s three existing network elements, i.e., the Space Network, Near Earth Network, and Deep Space Network, into a single network. In addition to the technical merits, the primary purpose of the Integrated Network is to achieve a level of operating cost efficiency significantly higher than it is today. Salient features of the Integrated Network include (a) a central system element that performs service management functions and user mission interfaces for service requests; (b) a set of common service execution equipment deployed at the all stations that provides return, forward, and radiometric data processing and delivery capabilities; (c) the network monitor and control operations for the entire integrated network are conducted remotely and centrally at a prime-shift site and rotating among three sites globally (a follow-the-sun approach); (d) the common network monitor and control software deployed at all three network elements that supports the follow-the-sun operations.

  7. Integrating the services' imagery architectures

    NASA Astrophysics Data System (ADS)

    Mader, John F.

    1993-04-01

    Any military organization requiring imagery must deal with one or more of several architectures: the tactical architectures of the three military departments, the theater architectures, and their interfaces to a separate national architecture. A seamless, joint, integrated architecture must meet today's imagery requirements. The CIO's vision of 'the right imagery to the right people in the right format at the right time' would serve well as the objective of a joint, integrated architecture. A joint imagery strategy should be initially shaped by the four pillars of the National Military Strategy of the United States: strategic deterrence; forward presence; crisis response; and reconstitution. In a macro view, it must consist of a series of sub-strategies to include science and technology and research and development, maintenance of the imagery related industrial base, acquisition, resource management, and burden sharing. Common imagery doctrine must follow the imagery strategy. Most of all, control, continuity, and direction must be maintained with regard to organizations and systems development as the architecture evolves. These areas and more must be addressed to reach the long term goal of a joint, integrated imagery architecture. This will require the services and theaters to relinquish some sovereignty over at least systems development and acquisition. Nevertheless, the goal of a joint, integrated imagery architecture is feasible. The author presents arguments and specific recommendations to orient the imagery community in the direction of a joint, integrated imagery architecture.

  8. Integrated Information and State Differentiation

    PubMed Central

    Marshall, William; Gomez-Ramirez, Jaime; Tononi, Giulio

    2016-01-01

    Integrated information (Φ) is a measure of the cause-effect power of a physical system. This paper investigates the relationship between Φ as defined in Integrated Information Theory and state differentiation (D), the number of, and difference between potential system states. Here we provide theoretical justification of the relationship between Φ and D, then validate the results using a simulation study. First, we show that a physical system in a state with high Φ necessarily has many elements and specifies many causal relationships. Furthermore, if the average value of integrated information across all states is high, the system must also have high differentiation. Next, we explore the use of D as a proxy for Φ using artificial networks, evolved to have integrated structures. The results show a positive linear relationship between Φ and D for multiple network sizes and connectivity patterns. Finally we investigate the differentiation evoked by sensory inputs and show that, under certain conditions, it is possible to estimate integrated information without a direct perturbation of its internal elements. In concluding, we discuss the need for further validation on larger networks and explore the potential applications of this work to the empirical study of consciousness, especially concerning the practical estimation of Φ from neuroimaging data. PMID:27445896

  9. Separations and safeguards model integration.

    SciTech Connect

    Cipiti, Benjamin B.; Zinaman, Owen

    2010-09-01

    Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

  10. Advanced Integration Matrix Education Outreach

    NASA Technical Reports Server (NTRS)

    Paul Heather L.

    2004-01-01

    The Advanced Integration Matrix (AIM) will design a ground-based test facility for developing revolutionary integrated systems for joint human-robotic missions in order to study and solve systems-level integration issues for exploration missions beyond Low Earth Orbit (LEO). This paper describes development plans for educational outreach activities related to technological and operational integration scenarios similar to the challenges that will be encountered through this project. The education outreach activities will provide hands-on, interactive exercises to allow students of all levels to experience design and operational challenges similar to what NASA deals with everyday in performing the integration of complex missions. These experiences will relate to and impact students everyday lives by demonstrating how their interests in science and engineering can develop into future careers, and reinforcing the concepts of teamwork and conflict resolution. Allowing students to experience and contribute to real-world development, research, and scientific studies of ground-based simulations for complex exploration missions will stimulate interest in the space program, and bring NASA's challenges to the student level. By enhancing existing educational programs and developing innovative activities and presentations, AIM will support NASA s endeavor to "inspire the next generation of explorers.. .as only NASA can."

  11. Integrated Information and State Differentiation.

    PubMed

    Marshall, William; Gomez-Ramirez, Jaime; Tononi, Giulio

    2016-01-01

    Integrated information (Φ) is a measure of the cause-effect power of a physical system. This paper investigates the relationship between Φ as defined in Integrated Information Theory and state differentiation ([Formula: see text]), the number of, and difference between potential system states. Here we provide theoretical justification of the relationship between Φ and [Formula: see text], then validate the results using a simulation study. First, we show that a physical system in a state with high Φ necessarily has many elements and specifies many causal relationships. Furthermore, if the average value of integrated information across all states is high, the system must also have high differentiation. Next, we explore the use of [Formula: see text] as a proxy for Φ using artificial networks, evolved to have integrated structures. The results show a positive linear relationship between Φ and [Formula: see text] for multiple network sizes and connectivity patterns. Finally we investigate the differentiation evoked by sensory inputs and show that, under certain conditions, it is possible to estimate integrated information without a direct perturbation of its internal elements. In concluding, we discuss the need for further validation on larger networks and explore the potential applications of this work to the empirical study of consciousness, especially concerning the practical estimation of Φ from neuroimaging data. PMID:27445896

  12. MHD Integrated Topping Cycle Project

    SciTech Connect

    Not Available

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  13. Fast integral methods for integrated optical systems simulations: a review

    NASA Astrophysics Data System (ADS)

    Kleemann, Bernd H.

    2015-09-01

    Boundary integral equation methods (BIM) or simply integral methods (IM) in the context of optical design and simulation are rigorous electromagnetic methods solving Helmholtz or Maxwell equations on the boundary (surface or interface of the structures between two materials) for scattering or/and diffraction purposes. This work is mainly restricted to integral methods for diffracting structures such as gratings, kinoforms, diffractive optical elements (DOEs), micro Fresnel lenses, computer generated holograms (CGHs), holographic or digital phase holograms, periodic lithographic structures, and the like. In most cases all of the mentioned structures have dimensions of thousands of wavelengths in diameter. Therefore, the basic methods necessary for the numerical treatment are locally applied electromagnetic grating diffraction algorithms. Interestingly, integral methods belong to the first electromagnetic methods investigated for grating diffraction. The development started in the mid 1960ies for gratings with infinite conductivity and it was mainly due to the good convergence of the integral methods especially for TM polarization. The first integral equation methods (IEM) for finite conductivity were the methods by D. Maystre at Fresnel Institute in Marseille: in 1972/74 for dielectric, and metallic gratings, and later for multiprofile, and other types of gratings and for photonic crystals. Other methods such as differential and modal methods suffered from unstable behaviour and slow convergence compared to BIMs for metallic gratings in TM polarization from the beginning to the mid 1990ies. The first BIM for gratings using a parametrization of the profile was developed at Karl-Weierstrass Institute in Berlin under a contract with Carl Zeiss Jena works in 1984-1986 by A. Pomp, J. Creutziger, and the author. Due to the parametrization, this method was able to deal with any kind of surface grating from the beginning: whether profiles with edges, overhanging non

  14. Microfabricated integrated DNA analysis systems

    SciTech Connect

    Woolley, A.T.; Mathies, R.A.; Northrup, M.A.

    1996-12-31

    Microfabrication has the potential to revolutionize chemical analysis, from reactions to separations to molecular biotechnology. Microfabricated devices allow high speed separations, automated sample handling, and the study of reactions in the pl to {mu}l volume range. Our research has focused on microfabricated integrated DNA analysis systems (MIDAS). As a first step, we have demonstrated high-speed DNA restriction fragment sizing, and DNA sequencing on microfabricated capillary electrophoresis (CE) chips. We have recently coupled microfabricated PCR reactors and CE chips to make integrated DNA analysis devices. With these devices, rapid PCR can be performed and the reaction products immediately analyzed on the CE chip, eliminating the need for manual transfer of the amplified sample. PCR amplifications have been done in less than 16 minutes, followed by CE analysis in under 100 seconds. These PCR-CE chips represent an important step towards completely integrated sample manipulation on microfabricated devices.

  15. Integrated Building Management System (IBMS)

    SciTech Connect

    Anita Lewis

    2012-07-01

    This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

  16. EPRI fuel cladding integrity program

    SciTech Connect

    Yang, R.

    1997-01-01

    The objectives of the EPRI fuel program is to supplement the fuel vendor research to assure that utility economic and operational interests are met. To accomplish such objectives, EPRI has conducted research and development efforts to (1) reduce fuel failure rates and mitigate the impact of fuel failures on plant operation, (2) provide technology to extend burnup and reduce fuel cycle cost. The scope of R&D includes fuel and cladding. In this paper, only R&D related to cladding integrity will be covered. Specific areas aimed at improving fuel cladding integrity include: (1) Fuel Reliability Data Base; (2) Operational Guidance for Defective Fuel; (3) Impact of Water Chemistry on Cladding Integrity; (4) Cladding Corrosion Data and Model; (5) Cladding Mechanical Properties; and (6) Transient Fuel Cladding Response.

  17. HELIO: The Heliophysics Integrated Observatory

    NASA Technical Reports Server (NTRS)

    Bentley, R. D.; Csillaghy, A.; Aboudarham, J.; Jacquey, C.; Hapgood, M. A.; Bocchialini, K.; Messerotti, M.; Brooke, J.; Gallagher, P.; Fox, P.; Hurlburt, N.; Roberts, D. A.; Sanchez Duarte, L.

    2011-01-01

    Heliophysics is a new research field that explores the Sun-Solar System Connection; it requires the joint exploitation of solar, heliospheric, magnetospheric and ionospheric observations. HELIO, the Heliophysics Integrated Observatory, will facilitate this study by creating an integrated e-Infrastructure that has no equivalent anywhere else. It will be a key component of a worldwide effort to integrate heliophysics data and will coordinate closely with international organizations to exploit synergies with complementary domains. HELIO was proposed under a Research Infrastructure call in the Capacities Programme of the European Commission's 7th Framework Programme (FP7). The project was selected for negotiation in January 2009; following a successful conclusion to these, the project started on 1 June 2009 and will last for 36 months.

  18. Models for medical practice integration.

    PubMed

    Harris, R M

    1994-08-01

    Decreased physician income, increased administrative burdens, and interference with the compassionate delivery of high-quality medical care are threatening the independent practice of medicine in solo and small group practices. Many established physicians, and the hospitals with which they relate, are searching for organizational models that, by integrating some or all aspects of their practices, will preserve incomes and reduce regulatory and administrative burdens. This article will describe several "practice integration models," pointing out advantages and disadvantages to physicians in established practices. (Many of the same arguments could be made for physicians new to practice, with different emphasis). The continuum of integration models is shown in figure 1, page 19. The group practice without walls and its two submodels, the independent group practice without walls (IGWW) and the affiliated medical practice corporation (AMPC) are more recent and more effective models and will be covered in depth in the article.

  19. Delay locked loop integrated circuit.

    SciTech Connect

    Brocato, Robert Wesley

    2007-10-01

    This report gives a description of the development of a Delay Locked Loop (DLL) integrated circuit (IC). The DLL was developed and tested as a stand-alone IC test chip to be integrated into a larger application specific integrated circuit (ASIC), the Quadrature Digital Waveform Synthesizer (QDWS). The purpose of the DLL is to provide a digitally programmable delay to enable synchronization between an internal system clock and external peripherals with unknown clock skew. The DLL was designed and fabricated in the IBM 8RF process, a 0.13 {micro}m CMOS process. It was designed to operate with a 300MHz clock and has been tested up to 500MHz.

  20. Integrative physiology of coronary microcirculation.

    PubMed

    Kajiya, F; Goto, M

    1999-06-01

    Coronary microvessels play a crucial role for mechanoenergetic interaction between blood flow and myocardial function, which is not uniform transmurally. Thus, highly organized vascular regulations are required for matching local blood flow with myocardial energy requirement. Recently, new technologies to investigate in vivo coronary microcirculation with new knowledge of the signaling molecules for vascular regulation have revolutionized our abilities to understand the integrative regulation of coronary microcirculation. In this review, the mechanical aspects of the interaction between coronary blood flow and myocardium, coronary arte-rial tree and its roles in myocardial blood flow regulation, hierarchical and dynamic control of coronary flow, capillary network and function, function of venous drainage system, and molecular and cellular aspects of integrative coronary blood flow regulation are discussed, focusing on their integrational roles in maintaining coronary microvascular function and cell signaling.

  1. 75 FR 13147 - Integrity Life Insurance Company, et al.;

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... COMMISSION Integrity Life Insurance Company, et al.; Notice of Application March 10, 2010. AGENCY: Securities...: Integrity Life Insurance Company (``Integrity''), Separate Account I of Integrity Life Insurance Company (``Integrity Separate Account I''), Separate Account II of Integrity Life Insurance Company...

  2. Integrated high power VCSEL systems

    NASA Astrophysics Data System (ADS)

    Moench, Holger; Conrads, Ralf; Gronenborn, Stephan; Gu, Xi; Miller, Michael; Pekarski, Pavel; Pollmann-Retsch, Jens; Pruijmboom, Armand; Weichmann, Ulrich

    2016-03-01

    High power VCSEL systems are a novel laser source used for thermal treatment in industrial manufacturing. These systems will be applied in many applications, which have not used a laser source before. This is enabled by the unique combination of efficiency, compactness and robustness. High power VCSEL system technology encompasses elements far beyond the VCSEL chip itself: i.e. heat sinks, bonding technology and integrated optics. This paper discusses the optimization of these components and processes specifically for building high-power laser systems with VCSEL arrays. New approaches help to eliminate components and process steps and make the system more robust and easier to manufacture. New cooler concepts with integrated electrical and mechanical interfaces have been investigated and offer advantages for high power system design. The bonding process of chips on sub-mounts and coolers has been studied extensively and for a variety of solder materials. High quality of the interfaces as well as good reliability under normal operation and thermal cycling have been realized. A viable alternative to soldering is silver sintering. The very positive results which have been achieved with a variety of technologies indicate the robustness of the VCSEL chips and their suitability for high power systems. Beam shaping micro-optics can be integrated on the VCSEL chip in a wafer scale process by replication of lenses in a polymer layer. The performance of VCSEL arrays with integrated collimation lenses has been positively evaluated and the integrated chips are fully compatible with all further assembly steps. The integrated high power systems make the application even easier and more robust. New examples in laser material processing and pumping of solid state lasers are presented.

  3. Curriculum Integration Using Enterprise Resource Planning: An Integrative Case Approach

    ERIC Educational Resources Information Center

    Cannon, David M.; Klein, Helen A; Koste, Lori L.; Magal, Simha R.

    2004-01-01

    Efforts to achieve greater curriculum integration in schools of business have included team teaching, student group projects, multidisciplinary cases, and, more recently, the use of enterprise resource planning (ERP) systems. Although these approaches are beneficial, they tend to be implemented on an ad hoc basis rather than through curriculum…

  4. Linear integral transformations and hierarchies of integrable nonlinear evolution equations

    NASA Astrophysics Data System (ADS)

    Nijhoff, Frank W.

    1988-07-01

    Integrable hierarchies of nonlinear evolution equations are investigated on the basis of linear integral equations. These are (Riemann-Hilbert type of) integral transformations which leave invariant an infinite sequence of ordinary differential matrix equations of increasing order in an (indefinite) parameter k. The potential matrices in these equations obey a set of nonlinear recursion relations, leading to a heirarchy of nonlinear partial differential equations. In decreasing order the same equations give rise to a “reciprocal” hierarchy, associated with Heisenberg ferromagnet type of equations. Central in the treatment is an embedding of the hierarchy into an infinite-matrix structure, which is constructed on the basis of the integral equations. In terms of this infinite-matrix structure the equations governing the hierarchies become quite simple. Furthermore, it leads in a straightforward way to various generalizations, such as to other types of linear spectral problems, multicomponent system and lattice equations. Generalizations to equations associated with noncommuting flows follow as a direct consequence of the treatment. Finally, some results on conserved densities and the Hamiltonian structure are briefly discussed.

  5. Implicit integration in a case of integrative visual agnosia.

    PubMed

    Aviezer, Hillel; Landau, Ayelet N; Robertson, Lynn C; Peterson, Mary A; Soroker, Nachum; Sacher, Yaron; Bonneh, Yoram; Bentin, Shlomo

    2007-05-15

    We present a case (SE) with integrative visual agnosia following ischemic stroke affecting the right dorsal and the left ventral pathways of the visual system. Despite his inability to identify global hierarchical letters [Navon, D. (1977). Forest before trees: The precedence of global features in visual perception. Cognitive Psychology, 9, 353-383], and his dense object agnosia, SE showed normal global-to-local interference when responding to local letters in Navon hierarchical stimuli and significant picture-word identity priming in a semantic decision task for words. Since priming was absent if these features were scrambled, it stands to reason that these effects were not due to priming by distinctive features. The contrast between priming effects induced by coherent and scrambled stimuli is consistent with implicit but not explicit integration of features into a unified whole. We went on to show that possible/impossible object decisions were facilitated by words in a word-picture priming task, suggesting that prompts could activate perceptually integrated images in a backward fashion. We conclude that the absence of SE's ability to identify visual objects except through tedious serial construction reflects a deficit in accessing an integrated visual representation through bottom-up visual processing alone. However, top-down generated images can help activate these visual representations through semantic links.

  6. Implicit integration in a case of integrative visual agnosia

    PubMed Central

    Aviezer, Hillel; Landau, Ayelet N.; Robertson, Lynn C.; Peterson, Mary A.; Soroker, Nachum; Sacher, Yaron; Bonneh, Yoram; Bentin, Shlomo

    2007-01-01

    We present a case (SE) with integrative visual agnosia following ischemic stroke affecting the right dorsal and the left ventral pathways of the visual system. Despite his inability to identify global hierarchical letters (Navon, 1977), and his dense object agnosia, SE showed normal global-to-local interference when responding to local letters in Navon hierarchical stimuli and significant picture-word identity priming in a semantic decision task for words. Since priming was absent if these features were scrambled, it stands to reason that these effects were not due to priming by distinctive features. The contrast between priming effects induced by coherent and scrambled stimuli is consistent with implicit but not explicit integration of features into a unified whole. We went on to show that possible/impossible object decisions were facilitated by words in a word-picture priming task, suggesting that prompts could activate perceptually integrated images in a backward fashion. We conclude that the absence of SE's ability to identify visual objects except through tedious serial construction reflects a deficit in accessing an integrated visual representation through bottom-up visual processing alone. However, top-down generated images can help activate these visual representations through semantic links. PMID:17339044

  7. Evaluation of Mean and Variance Integrals without Integration

    ERIC Educational Resources Information Center

    Joarder, A. H.; Omar, M. H.

    2007-01-01

    The mean and variance of some continuous distributions, in particular the exponentially decreasing probability distribution and the normal distribution, are considered. Since they involve integration by parts, many students do not feel comfortable. In this note, a technique is demonstrated for deriving mean and variance through differential…

  8. Working session 3: Tubing integrity

    SciTech Connect

    Cueto-Felgueroso, C.; Strosnider, J.

    1997-02-01

    Twenty-three individuals representing nine countries (Belgium, Canada, the Czech Republic, France, Japan, the Slovak Republic, Spain, the UK, and the US) participated in the session on tube integrity. These individuals represented utilities, vendors, consultants and regulatory authorities. The major subjects discussed by the group included overall objectives of managing steam generator tube degradation, necessary elements of a steam generator degradation management program, the concept of degradation specific management, structural integrity evaluations, leakage evaluations, and specific degradation mechanisms. The group`s discussions on these subjects, including conclusions and recommendations, are summarized in this article.

  9. Fully Integral, Flexible Composite Driveshaft

    NASA Technical Reports Server (NTRS)

    Lawrie, Duncan

    2014-01-01

    An all-composite driveshaft incorporating integral flexible diaphragms was developed for prime contractor testing. This new approach makes obsolete the split lines required to attach metallic flex elements and either metallic or composite spacing tubes in current solutions. Subcritical driveshaft weights can be achieved that are half that of incumbent technology for typical rotary wing shaft lengths. Spacing tubes compose an integral part of the initial tooling but remain part of the finished shaft and control natural frequencies and torsional stability. A concurrently engineered manufacturing process and design for performance competes with incumbent solutions at significantly lower weight and with the probability of improved damage tolerance and fatigue life.

  10. Wavefront modifier with integrated sensor

    NASA Astrophysics Data System (ADS)

    Griffith, Mike; Laycock, Leslie; Rowe, Duncan; Cairns, Lee

    2009-09-01

    We present a novel method for integrating a wavefront sensor into a deformable mirror. This development should simplify the design of laser and electro-optic systems, and lead to smart mirrors which need no external control systems. In operation, a small fraction of the incident light is transmitted through the mirror coating and is sampled by a Hartmann Mask. Options include open loop, traditional closed loop or fully integrated operation whereby the wavefront sensor is used to provide direct feedback to the mirror actuators, enabling automatic alignment or phase conjugation.

  11. Intelligent Integrated System Health Management

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando

    2012-01-01

    Intelligent Integrated System Health Management (ISHM) is the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system (Management: storage, distribution, sharing, maintenance, processing, reasoning, and presentation). Presentation discusses: (1) ISHM Capability Development. (1a) ISHM Knowledge Model. (1b) Standards for ISHM Implementation. (1c) ISHM Domain Models (ISHM-DM's). (1d) Intelligent Sensors and Components. (2) ISHM in Systems Design, Engineering, and Integration. (3) Intelligent Control for ISHM-Enabled Systems

  12. Integrated multiplexed capillary electrophoresis system

    DOEpatents

    Yeung, Edward S.; Tan, Hongdong

    2002-05-14

    The present invention provides an integrated multiplexed capillary electrophoresis system for the analysis of sample analytes. The system integrates and automates multiple components, such as chromatographic columns and separation capillaries, and further provides a detector for the detection of analytes eluting from the separation capillaries. The system employs multiplexed freeze/thaw valves to manage fluid flow and sample movement. The system is computer controlled and is capable of processing samples through reaction, purification, denaturation, pre-concentration, injection, separation and detection in parallel fashion. Methods employing the system of the invention are also provided.

  13. Human System Integration: Regulatory Analysis

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This document was intended as an input to the Access 5 Policy Integrated Product team. Using a Human System Integration (HIS) perspective, a regulatory analyses of the FARS (specifically Part 91), the Airman s Information Manual (AIM) and the FAA Controllers Handbook (7110.65) was conducted as part of a front-end approach needed to derive HSI requirements for Unmanned Aircraft Systems (UAS) operations in the National Airspace System above FL430. The review of the above aviation reference materials yielded eighty-four functions determined to be necessary or highly desirable for flight within the Air Traffic Management System. They include categories for Flight, Communications, Navigation, Surveillance, and Hazard Avoidance.

  14. Continuous-Integration Laser Energy Lidar Monitor

    NASA Technical Reports Server (NTRS)

    Karsh, Jeremy

    2011-01-01

    This circuit design implements an integrator intended to allow digitization of the energy output of a pulsed laser, or the energy of a received pulse of laser light. It integrates the output of a detector upon which the laser light is incident. The integration is performed constantly, either by means of an active integrator, or by passive components.

  15. Family Integration and Children's Self-Esteem.

    ERIC Educational Resources Information Center

    Yabiku, Scott T.; Axinn, William G.; Thornton, Arland

    1999-01-01

    Introduces the concept of family integration to describe how family social organization affects individuals. Hypothesizes that well-integrated parents benefit children's self-concept formation. Tests three mechanisms of parental family integration, and shows that integration early in life has positive effects on children's self-esteem in early…

  16. Four Ways to Skin a Definite Integral

    ERIC Educational Resources Information Center

    Dence, Thomas; Dence, Joseph

    2010-01-01

    The integral of 1/(1 + x[superscript 2]) is standard in elementary calculus, but the related integral 1/(1 + x[superscript 4]) rarely appears. In this article we examine the latter integral, computing its value by four different methods; several that involve standard elementary calculus techniques, and several involving complex integration.

  17. Integration through a Card-Sort Activity

    ERIC Educational Resources Information Center

    Green, Kris; Ricca, Bernard P.

    2015-01-01

    Learning to compute integrals via the various techniques of integration (e.g., integration by parts, partial fractions, etc.) is difficult for many students. Here, we look at how students in a college level Calculus II course develop the ability to categorize integrals and the difficulties they encounter using a card sort-resort activity. Analysis…

  18. Writing Integrative Literature Reviews: Guidelines and Examples

    ERIC Educational Resources Information Center

    Torraco, Richard J.

    2005-01-01

    The integrative literature review is a distinctive form of research that generates new knowledge about the topic reviewed. Little guidance is available on how to write an integrative literature review. This article discusses how to organize and write an integrative literature review and cites examples of published integrative literature reviews…

  19. A Review of "Integrity[TM]"

    ERIC Educational Resources Information Center

    Veldkamp, Bernard P.

    2008-01-01

    Integrity[TM], an online application for testing both the statistical integrity of the test and the academic integrity of the examinees, was evaluated for this review. Program features and the program output are described. An overview of the statistics in Integrity[TM] is provided, and the application is illustrated with a small simulation study.…

  20. Operation of orifice meter chart integrators

    SciTech Connect

    Gray, C.

    1995-12-01

    When properly maintained and operated, the chart integrator can provide reliable chart integration for many years. The overall accuracy of the integration process win be determined by the proficiency of the operator as well as the upkeep and calibration of the chart integrator.

  1. A survey of integrated optics with bibliography

    NASA Technical Reports Server (NTRS)

    Owen, R. B.

    1973-01-01

    The field of integrated optics is surveyed. Light coupling into films, modulation of light propagating in films, and current integrated optics developments and devices are discussed. It is concluded that integrated optics technology is expected to revolutionize the electronics industry as completely as did microcircuit technology. An extensive bibliography for the field of integrated optics is included.

  2. Stratoscope 2 integrating television camera

    NASA Technical Reports Server (NTRS)

    1973-01-01

    The development, construction, test and delivery of an integrating television camera for use as the primary data sensor on Flight 9 of Stratoscope 2 is described. The system block diagrams are presented along with the performance data, and definition of the interface of the telescope with the power, telemetry, and communication system.

  3. The Early Years: Integrating Design

    ERIC Educational Resources Information Center

    Ashbrook, Peggy; Nellor, Sue

    2015-01-01

    Engineering is such a common part of children's work in early childhood programs that teachers can simply look around the room to identify examples where students have engaged in engineering practices. This article presents a classroom activity that integrates engineering design by building on the everyday problems that young children encounter in…

  4. Preschool Integration: An Experimental Classroom.

    ERIC Educational Resources Information Center

    Marshall, Linda; And Others

    1986-01-01

    The study compared four methods of increasing quantity and quality of play interactions between nonhandicapped and 11 moderately/severely handicapped children in an integrated preschool. Results of contingent reinforcement, reinforcement plus modeling, reinforcement plus behavior management, and reinforcement plus modeling plus behavior management…

  5. Yavapai College Integrated Master Plan.

    ERIC Educational Resources Information Center

    Yavapai Coll., Prescott, AZ.

    This integrated master plan for Yavapai College (Arizona) includes the following six key components: (1) district services overview; (2) educational services plan; (3) human resources plan; (4) information technology services; (5) facilities plan; and (6) financial plan. The master plan was developed as a result of discussions and meetings with…

  6. Technology Integration and Teaching Expertise.

    ERIC Educational Resources Information Center

    Pierson, Melissa E.

    This paper reports on a study that investigated the relationships between technology-use and teaching ability in the practice of elementary teachers. Case study data from exemplary technology integrators, representing various levels of teaching and technology-use ability, led to the formulation of five assertions about ways these teachers taught…

  7. Integrating Technologies in Global Studies.

    ERIC Educational Resources Information Center

    James, Juliana; Snyder, Thomas

    1993-01-01

    Describes the curriculum at Frost Lake (Minnesota) Magnet School of Technology and Global Studies, which integrates technology, basic skills, and global education to teach respect for diversity and justice and peace issues in multicultural education. Objectives, activities, and resources for three sample lessons are presented. (LRW)

  8. Art Integration and Cognitive Development

    ERIC Educational Resources Information Center

    Baker, Dawn

    2013-01-01

    The arts have long been valued for their aesthetic contributions to education, and studies have been conducted to demonstrate their contribution to academic performance in an attempt to justify their inclusion in the curriculum. Art integration involves learning core content subjects (math, reading, language, science, social studies) through the…

  9. NEMS integrating module documentation report

    SciTech Connect

    Not Available

    1993-12-14

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  10. Valuing ecosystem integrity and health

    SciTech Connect

    Rolston, H. III

    1995-12-31

    There is widespread concern for valuing ecosystem integrity and health, in Congressional legislation, in policy for ecosystem management, sustainable development, and environmental quality. Both integrity and health are combined fact-value words that significantly mix science and advocacy. Science orients policy, though policy also orients science. Recent ecological science raises questions about the mix of stability and historical change in ecosystems, about how structure and process combine to form biotic communities, about order and disorder in natural systems, and the scales on which these occur. Concern for sustainable development mixes the concern for a sustainable biosphere. Ecosystem integrity and health require much restoration of degraded environments, but restoration goals also mix science and values. A traditional attitude toward nature as resources to be for several centuries, is being challenged by an attitude toward nature as resources to be managed by sound scientific management, increasingly successful for several centuries, is being challenged by an attitude of responsibility for harmonizing culture with nature. This will require an unprecendented mix of science, ethics, and policy in the century ahead. It would be a tragic failure of human culture, especially of modern scientifically advanced culture, if it were further to degrade the integrity, health, and biodiversity achieved over many millennia, leaving a still more depauperate Earth. Homo sapiens, improverishing people and the planet, would not be the {open_quotes}wise{close_quotes} species at all.

  11. The Virtues of Organizational Integrity

    ERIC Educational Resources Information Center

    Young, Robert B.

    2011-01-01

    In this chapter, the author begins by describing the organizational virtues that are associated with structural and ethical integrity. Virtues are the focus instead of behaviors, traits, or values, because virtues contain all these components: the stable characteristics of traits, the behaviors that are evidence of traits, and the values that…

  12. Integrate Digital Storytelling in Education

    ERIC Educational Resources Information Center

    Alismail, Halah Ahmed

    2015-01-01

    In the 21st century, educators believe using technology can be an effective factor in education for the new generation, making educational goals easier to achieve. In fact, technology is being studied by teachers and implemented into classrooms for a positive effect on student learning. Many teachers are integrating multimedia tools in teaching…

  13. DESIGN OF INTEGRATING WAVEGUIDE BIOSENSOR

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Integrating Waveguide Biosensor allows for rapid and sensitive detection of pathogenic agents, cells and proteins via immunoassay or PCR products. The analytes are captured on the surface of the waveguide and then tagged with fluorescent labels. The waveguides are illuminated by excitation light...

  14. Development of CMOS integrated circuits

    NASA Technical Reports Server (NTRS)

    Bertino, F.; Feller, A.; Greenhouse, J.; Lombardi, T.; Merriam, A.; Noto, R.; Ozga, S.; Pryor, R.; Ramondetta, P.; Smith, A.

    1979-01-01

    Report documents life cycles of two custom CMOS integrated circuits: (1) 4-bit multiplexed register with shift left and shift right capabilities, and (2) dual 4-bit registers. Cycles described include conception as logic diagrams through design, fabrication, testing, and delivery.

  15. Integration of Examinations and Education.

    ERIC Educational Resources Information Center

    Mehler, Alan H.

    1992-01-01

    Discusses examinations as the major determinant of student behavior and suggests that no improvement in the effectiveness of biochemistry courses will occur until examinations are so integrated into the educational process that they reinforce educational objectives. Includes discussions on self-education, cooperation between students, and problem…

  16. [Integrating complementary medicines into care].

    PubMed

    Graz, Bertrand

    2016-04-01

    More and more research is being carried out into complementary medicines. It is no longer possible to say that these treatments have no scientific basis, as for some, their efficacy has been proven by clinical studies. Health services must move beyond ideological arguments and integrate safe and cost-effective complementary medicines.

  17. Structurally integrated steel solar collector

    DOEpatents

    Moore, S.W.

    1975-06-03

    Herein is disclosed a flate plate solar heat collector unit. The solar collector is integrated as a structural unit so that the collector also functions as the building roof. The functions of efficient heat collection, liquid coolant flow passages, roof structural support, and building insulation are combined into one unit.

  18. Structurally integrated steel solar collector

    DOEpatents

    Moore, Stanley W.

    1977-03-08

    Herein is disclosed a flat plate solar heat collector unit. The solar collector is integrated as a structural unit so that the collector also functions as the building roof. The functions of efficient heat collection, liquid coolant flow passages, roof structural support and building insulation are combined into one unit.

  19. Using Dance To Integrate Exceptionalities.

    ERIC Educational Resources Information Center

    Wolf, Geraldine A.; Launi, Barbara A.

    This conference presentation handout describes a program which uses dance therapy to integrate special education students with various disabilities. The 6-week program at a middle school involved having a professional dancer teach students traditional and modern dance methods as a means of expressing emotions, followed by teams of students…

  20. Integrated decontamination process for metals

    DOEpatents

    Snyder, Thomas S.; Whitlow, Graham A.

    1991-01-01

    An integrated process for decontamination of metals, particularly metals that are used in the nuclear energy industry contaminated with radioactive material. The process combines the processes of electrorefining and melt refining to purify metals that can be decontaminated using either electrorefining or melt refining processes.