IDEAS: A multidisciplinary computer-aided conceptual design system for spacecraft

NASA Technical Reports Server (NTRS)

Ferebee, M. J., Jr.

1984-01-01

During the conceptual development of advanced aerospace vehicles, many compromises must be considered to balance economy and performance of the total system. Subsystem tradeoffs may need to be made in order to satisfy system-sensitive attributes. Due to the increasingly complex nature of aerospace systems, these trade studies have become more difficult and time-consuming to complete and involve interactions of ever-larger numbers of subsystems, components, and performance parameters. The current advances of computer-aided synthesis, modeling and analysis techniques have greatly helped in the evaluation of competing design concepts. Langley Research Center's Space Systems Division is currently engaged in trade studies for a variety of systems which include advanced ground-launched space transportation systems, space-based orbital transfer vehicles, large space antenna concepts and space stations. The need for engineering analysis tools to aid in the rapid synthesis and evaluation of spacecraft has led to the development of the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. The ADEAS system has been used to perform trade studies of competing technologies and requirements in order to pinpoint possible beneficial areas for research and development. IDEAS is presented as a multidisciplinary tool for the analysis of advanced space systems. Capabilities range from model generation and structural and thermal analysis to subsystem synthesis and performance analysis.

Large Signal Modeling and Analysis of the GaAs MESFET.

DTIC Science & Technology

1986-07-09

various dimensions and physical parameters. A powerful computer aided design system can be developed by automating the circuit element and parameter...circuit model of the GaAs MESFET to aid in the designs of microwave MESFET circuits. The circuit elements of this model are obtained either directly...34. -. ’ Abstract The purpose of this work is to develop a large signal signal lumped circuit model of the GaAs MESFET to aid In the designs of microwave MESFET

Program design by a multidisciplinary team. [for structural finite element analysis on STAR-100 computer

NASA Technical Reports Server (NTRS)

Voigt, S.

1975-01-01

The use of software engineering aids in the design of a structural finite-element analysis computer program for the STAR-100 computer is described. Nested functional diagrams to aid in communication among design team members were used, and a standardized specification format to describe modules designed by various members was adopted. This is a report of current work in which use of the functional diagrams provided continuity and helped resolve some of the problems arising in this long-running part-time project.

A computer aided engineering tool for ECLS systems

NASA Technical Reports Server (NTRS)

Bangham, Michal E.; Reuter, James L.

1987-01-01

The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

Designers Workbench: Towards Real-Time Immersive Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuester, F; Duchaineau, M A; Hamann, B

2001-10-03

This paper introduces the DesignersWorkbench, a semi-immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates from a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The DesignersWorkbench aims at closing this technologymore » or ''digital gap'' experienced by design and CAD engineers by transforming the classical design paradigm into its filly integrated digital and virtual analog allowing collaborative development in a semi-immersive virtual environment. This project emphasizes two key components from the classical product design cycle: freeform modeling and analysis. In the freeform modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.« less

Design of Computer-aided Instruction for Radiology Interpretation: The Role of Cognitive Task Analysis

PubMed Central

Pusic, Martin V.; LeBlanc, Vicki; Patel, Vimla L.

2001-01-01

Traditional task analysis for instructional design has emphasized the importance of precisely defining behavioral educational objectives and working back to select objective-appropriate instructional strategies. However, this approach may miss effective strategies. Cognitive task analysis, on the other hand, breaks a process down into its component knowledge representations. Selection of instructional strategies based on all such representations in a domain is likely to lead to optimal instructional design. In this demonstration, using the interpretation of cervical spine x-rays as an educational example, we show how a detailed cognitive task analysis can guide the development of computer-aided instruction.

Geometric modeling for computer aided design

NASA Technical Reports Server (NTRS)

Schwing, James L.

1992-01-01

The goal was the design and implementation of software to be used in the conceptual design of aerospace vehicles. Several packages and design studies were completed, including two software tools currently used in the conceptual level design of aerospace vehicles. These tools are the Solid Modeling Aerospace Research Tool (SMART) and the Environment for Software Integration and Execution (EASIE). SMART provides conceptual designers with a rapid prototyping capability and additionally provides initial mass property analysis. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand alone analysis codes that result in the streamlining of the exchange of data between programs, reducing errors and improving efficiency.

Computer-aided drug design for AMP-activated protein kinase activators.

PubMed

Wang, Zhanli; Huo, Jianxin; Sun, Lidan; Wang, Yongfu; Jin, Hongwei; Yu, Hui; Zhang, Liangren; Zhou, Lishe

2011-09-01

AMP-activated protein kinase (AMPK) is an important therapeutic target for the potential treatment of metabolic disorders, cardiovascular disease and cancer. Recently, various classes of compounds that activate AMPK by direct or indirect interactions have been reported. The importance of computer-aided drug design approaches in the search for potent activators of AMPK is now established, including structure-based design, ligand-based design, fragment-based design, as well as structural analysis. This review article highlights the computer-aided drug design approaches utilized to discover of activators targeting AMPK. The principles, advantages or limitation of the different methods are also being discussed together with examples of applications taken from the literatures.

Who Benefits from Student Aid? The Economic Incidence of Tax-Based Federal Student Aid

ERIC Educational Resources Information Center

Turner, Nicholas

2012-01-01

Federal benefit programs, including federal student aid, are designed to aid targeted populations. Behavioral responses to these programs may alter the incidence of their benefits, a possibility that receives less attention in the literature compared to tax incidence. I demonstrate the importance of benefit incidence analysis by showing that the…

Computer-Aided Design Applications for the Base Civil Engineering Technical Design Section.

DTIC Science & Technology

1983-09-01

4 1983.’ S DEPARTMENT OF TiHE AIR FORCE L ~j AIR UNIVERSITY * AIR FORCE INSTITUTE OF TECHNOLOGY Nam Wright- Patterson Air Force Bas, Ohio d ’rI ’ 4to...I -. L I 1it it COMPUTER-AIDED DESIGN APPLICATIONS FOR THE BASE CIVIL ENGINEERING TECHNICAL DESIGN SECTION William M. Duncan, Captain, USAF LSSR 15-83...8217 .. ’ , .. - -. . ’ . , ._, - . . - .2 , _ : ’i 1 . . . . .- J.. .. . ’ _ -i l - , . analysis and design, water supply and wastewater disposal system design, and most

The vehicle design evaluation program - A computer-aided design procedure for transport aircraft

NASA Technical Reports Server (NTRS)

Oman, B. H.; Kruse, G. S.; Schrader, O. E.

1977-01-01

The vehicle design evaluation program is described. This program is a computer-aided design procedure that provides a vehicle synthesis capability for vehicle sizing, external load analysis, structural analysis, and cost evaluation. The vehicle sizing subprogram provides geometry, weight, and balance data for aircraft using JP, hydrogen, or methane fuels. The structural synthesis subprogram uses a multistation analysis for aerodynamic surfaces and fuselages to develop theoretical weights and geometric dimensions. The parts definition subprogram uses the geometric data from the structural analysis and develops the predicted fabrication dimensions, parts material raw stock buy requirements, and predicted actual weights. The cost analysis subprogram uses detail part data in conjunction with standard hours, realization factors, labor rates, and material data to develop the manufacturing costs. The program is used to evaluate overall design effects on subsonic commercial type aircraft due to parameter variations.

Estimation of the failure risk of a maxillary premolar with different crack depths with endodontic treatment by computer-aided design/computer-aided manufacturing ceramic restorations.

PubMed

Lin, Chun-Li; Chang, Yen-Hsiang; Hsieh, Shih-Kai; Chang, Wen-Jen

2013-03-01

This study evaluated the risk of failure for an endodontically treated premolar with different crack depths, which was shearing toward the pulp chamber and was restored by using 3 different computer-aided design/computer-aided manufacturing ceramic restoration configurations. Three 3-dimensional finite element models designed with computer-aided design/computer-aided manufacturing ceramic onlay, endocrown, and conventional crown restorations were constructed to perform simulations. The Weibull function was incorporated with finite element analysis to calculate the long-term failure probability relative to different load conditions. The results indicated that the stress values on the enamel, dentin, and luting cement for endocrown restorations exhibited the lowest values relative to the other 2 restoration methods. Weibull analysis revealed that the overall failure probabilities in a shallow cracked premolar were 27%, 2%, and 1% for the onlay, endocrown, and conventional crown restorations, respectively, in the normal occlusal condition. The corresponding values were 70%, 10%, and 2% for the depth cracked premolar. This numeric investigation suggests that the endocrown provides sufficient fracture resistance only in a shallow cracked premolar with endodontic treatment. The conventional crown treatment can immobilize the premolar for different cracked depths with lower failure risk. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Conceptual spacecraft systems design and synthesis

NASA Technical Reports Server (NTRS)

Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

1984-01-01

An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced Systems (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth designs is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze, and conduct parametric studies and modify earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

In Vitro Evaluation of a Program for Machine-Aided Indexing.

ERIC Educational Resources Information Center

Jacquemin, Christian; Daille, Beatrice; Royaute, Jean; Polanco, Xavier

2002-01-01

Presents the human evaluation of ILIAD, a program for machine-aided indexing that was designed to assist expert librarians in computer-aided indexing and document analysis. Topics include controlled indexing and free indexing; natural language and concept-based information retrieval; evaluation methodology; syntactic variations; and a comparison…

An ergonomics prototype of adjustable chin stands aid for visual mechanical inspection at electronic manufacturing-based company in Kuantan, Malaysia

NASA Astrophysics Data System (ADS)

Elias, Nurainaa; Mat Yahya, Nafrizuan

2018-04-01

Chin stands aid is a device designed to reduce fatigue on the chin during the Visual Mechanical Inspection (VMI) task for operators in TT Electronic Sdn Bhd, Kuantan, Malaysia. It is also used to reduce cycle time and also improve employee well-being in terms of comfort. In this project, a 3D model of chin stands aid with an ergonomics approach is created using SOLIDWORKS software. Two different concepts were designed and the best one is chosen based on the Pugh concept selection method, concept screening and also concept scoring. After the selection of concepts is done, a prototype of chin stands aid will be developed and a simulation of the prototype is performed. The simulation has been executed by using Workbench ANSYS software as a tool. Stress analysis, deformation analysis, and fatigue analysis have been done to know the strength and lifespan of the product. The prototype also has been tested to know the functionality and also comfortability for the user to use the chin stands aid.

Social representation of hearing aids: cross-cultural study in India, Iran, Portugal, and the United Kingdom.

PubMed

Manchaiah, Vinaya; Danermark, Berth; Vinay; Ahmadi, Tayebeh; Tomé, David; Krishna, Rajalakshmi; Germundsson, Per

2015-01-01

The current study was aimed at understanding the social representation of hearing aids in India, Iran, Portugal, and the United Kingdom. We also compared these results to explore the cross-cultural differences and similarities among these countries. The study involved a cross-sectional design, and the data were collected from four different countries using the snowball sampling method. Data were analyzed using a content analysis to identify the most-similar categories of responses reported, a co-occurrences analysis to see which of these categories are reported commonly, and a chi-square analysis to study if there was any association between positive, neutral, and negative connotations among participants in different countries. The current study revealed four different social representations of hearing aids from India, Iran, Portugal, and the United Kingdom, and also a global index. The study results provide very useful insights into how hearing aids are represented in the society. These findings may have important implications for public education and also for manufacturers from the viewpoint of designing and marketing hearing aids in different countries.

Social representation of hearing aids: cross-cultural study in India, Iran, Portugal, and the United Kingdom

PubMed Central

Manchaiah, Vinaya; Danermark, Berth; Vinay; Ahmadi, Tayebeh; Tomé, David; Krishna, Rajalakshmi; Germundsson, Per

2015-01-01

Background The current study was aimed at understanding the social representation of hearing aids in India, Iran, Portugal, and the United Kingdom. We also compared these results to explore the cross-cultural differences and similarities among these countries. Methods The study involved a cross-sectional design, and the data were collected from four different countries using the snowball sampling method. Data were analyzed using a content analysis to identify the most-similar categories of responses reported, a co-occurrences analysis to see which of these categories are reported commonly, and a chi-square analysis to study if there was any association between positive, neutral, and negative connotations among participants in different countries. Results The current study revealed four different social representations of hearing aids from India, Iran, Portugal, and the United Kingdom, and also a global index. Conclusion The study results provide very useful insights into how hearing aids are represented in the society. These findings may have important implications for public education and also for manufacturers from the viewpoint of designing and marketing hearing aids in different countries. PMID:26504376

76 FR 25353 - Hikma Pharmaceuticals PLC; Analysis of Agreement Containing Consent Orders To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... FEDERAL TRADE COMMISSION [File No. 111 0051] Hikma Pharmaceuticals PLC; Analysis of Agreement Containing Consent Orders To Aid Public Comment AGENCY: Federal Trade Commission. ACTION: Proposed consent... Pharmaceuticals PLC (``Hikma'') that is designed to remedy the anticompetitive effects of Hikma's acquisition of...

Computer aided design environment for the analysis and design of multi-body flexible structures

NASA Technical Reports Server (NTRS)

Ramakrishnan, Jayant V.; Singh, Ramen P.

1989-01-01

A computer aided design environment consisting of the programs NASTRAN, TREETOPS and MATLAB is presented in this paper. With links for data transfer between these programs, the integrated design of multi-body flexible structures is significantly enhanced. The CAD environment is used to model the Space Shuttle/Pinhole Occulater Facility. Then a controller is designed and evaluated in the nonlinear time history sense. Recent enhancements and ongoing research to add more capabilities are also described.

A computer-aided approach to nonlinear control systhesis

NASA Technical Reports Server (NTRS)

Wie, Bong; Anthony, Tobin

1988-01-01

The major objective of this project is to develop a computer-aided approach to nonlinear stability analysis and nonlinear control system design. This goal is to be obtained by refining the describing function method as a synthesis tool for nonlinear control design. The interim report outlines the approach by this study to meet these goals including an introduction to the INteractive Controls Analysis (INCA) program which was instrumental in meeting these study objectives. A single-input describing function (SIDF) design methodology was developed in this study; coupled with the software constructed in this study, the results of this project provide a comprehensive tool for design and integration of nonlinear control systems.

Computer-Aided Design Of Turbine Blades And Vanes

NASA Technical Reports Server (NTRS)

Hsu, Wayne Q.

1988-01-01

Quasi-three-dimensional method for determining aerothermodynamic configuration of turbine uses computer-interactive analysis and design and computer-interactive graphics. Design procedure executed rapidly so designer easily repeats it to arrive at best performance, size, structural integrity, and engine life. Sequence of events in aerothermodynamic analysis and design starts with engine-balance equations and ends with boundary-layer analysis and viscous-flow calculations. Analysis-and-design procedure interactive and iterative throughout.

Interactive systems design and synthesis of future spacecraft concepts

NASA Technical Reports Server (NTRS)

Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

1984-01-01

An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced spacecraft (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze and conduct parametric studies and modify Earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

Computer-aided linear-circuit design.

NASA Technical Reports Server (NTRS)

Penfield, P.

1971-01-01

Usually computer-aided design (CAD) refers to programs that analyze circuits conceived by the circuit designer. Among the services such programs should perform are direct network synthesis, analysis, optimization of network parameters, formatting, storage of miscellaneous data, and related calculations. The program should be embedded in a general-purpose conversational language such as BASIC, JOSS, or APL. Such a program is MARTHA, a general-purpose linear-circuit analyzer embedded in APL.

Understanding the low uptake of bone-anchored hearing aids: a review.

PubMed

Powell, R; Wearden, A; Pardesi, S M; Green, K

2017-03-01

Bone-anchored hearing aids improve hearing for patients for whom conventional behind-the-ear aids are problematic. However, uptake of bone-anchored hearing aids is low and it is important to understand why this is the case. A narrative review was conducted. Studies examining why people accept or decline bone-anchored hearing aids and satisfaction levels of people with bone-anchored hearing aids were reviewed. Reasons for declining bone-anchored hearing aids included limited perceived benefits, concerns about surgery, aesthetic concerns and treatment cost. No studies providing in-depth analysis of the reasons for declining or accepting bone-anchored hearing aids were identified. Studies of patient satisfaction showed that most participants reported benefits with bone-anchored hearing aids. However, most studies used cross-sectional and/or retrospective designs and only included people with bone-anchored hearing aids. Important avenues for further research are in-depth qualitative research designed to fully understand the decision-making process for bone-anchored hearing aids and rigorous quantitative research comparing satisfaction of people who receive bone-anchored hearing aids with those who receive alternative (or no) treatments.

Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMAID)

NASA Technical Reports Server (NTRS)

Rogers, James L.; Barthelemy, Jean-Francois M.

1992-01-01

This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMaid)

NASA Technical Reports Server (NTRS)

Rogers, James L.; Barthelemy, Jean-Francois M.

1992-01-01

This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

Computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems

NASA Astrophysics Data System (ADS)

Ku, Walter H.

1989-05-01

The objectives of this research are to develop analytical and computer aided design techniques for monolithic microwave and millimeter wave integrated circuits (MMIC and MIMIC) and subsystems and to design and fabricate those ICs. Emphasis was placed on heterojunction-based devices, especially the High Electron Mobility Transition (HEMT), for both low noise and medium power microwave and millimeter wave applications. Circuits to be considered include monolithic low noise amplifiers, power amplifiers, and distributed and feedback amplifiers. Interactive computer aided design programs were developed, which include large signal models of InP MISFETs and InGaAs HEMTs. Further, a new unconstrained optimization algorithm POSM was developed and implemented in the general Analysis and Design program for Integrated Circuit (ADIC) for assistance in the design of largesignal nonlinear circuits.

Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

NASA Technical Reports Server (NTRS)

Goltz, G.; Kaiser, L. M.; Weiner, H.

1977-01-01

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

Removal of Supernumerary Teeth Utilizing a Computer-Aided Design/Computer-Aided Manufacturing Surgical Guide.

PubMed

Jo, Chanwoo; Bae, Doohwan; Choi, Byungho; Kim, Jihun

2017-05-01

Supernumerary teeth need to be removed because they can cause various complications. Caution is needed because their removal can cause damage to permanent teeth or tooth germs in the local vicinity. Surgical guides have recently been used in maxillofacial surgery. Because surgical guides are designed through preoperative analysis by computer-aided design software and fabricated using a 3-dimensional printer applying computer-aided manufacturing technology, they increase the accuracy and predictability of surgery. This report describes 2 cases of removal of a mesiodens-1 from a child and 1 from an adolescent-using a surgical guide; these would have been difficult to remove with conventional surgical methods. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Usability Studies in Virtual and Traditional Computer Aided Design Environments for Fault Identification

DTIC Science & Technology

2017-08-08

Usability Studies In Virtual And Traditional Computer Aided Design Environments For Fault Identification Dr. Syed Adeel Ahmed, Xavier University...virtual environment with wand interfaces compared directly with a workstation non-stereoscopic traditional CAD interface with keyboard and mouse. In...the differences in interaction when compared with traditional human computer interfaces. This paper provides analysis via usability study methods

An Integrated Approach for Conducting a Behavioral Systems Analysis

ERIC Educational Resources Information Center

Diener, Lori H.; McGee, Heather M.; Miguel, Caio F.

2009-01-01

The aim of this paper is to illustrate how to conduct a Behavioral Systems Analysis (BSA) to aid in the design of targeted performance improvement interventions. BSA is a continuous process of analyzing the right variables to the right extent to aid in planning and managing performance at the organization, process, and job levels. BSA helps to…

ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

NASA Technical Reports Server (NTRS)

Jayaram, S.; Myklebust, A.; Gelhausen, P.

1992-01-01

A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

NASA Technical Reports Server (NTRS)

Lahoti, G. D.; Akgerman, N.; Altan, T.

1978-01-01

Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

An Analysis of Computer Aided Design (CAD) Packages Used at MSFC for the Recent Initiative to Integrate Engineering Activities

NASA Technical Reports Server (NTRS)

Smith, Leigh M.; Parker, Nelson C. (Technical Monitor)

2002-01-01

This paper analyzes the use of Computer Aided Design (CAD) packages at NASA's Marshall Space Flight Center (MSFC). It examines the effectiveness of recent efforts to standardize CAD practices across MSFC engineering activities. An assessment of the roles played by management, designers, analysts, and manufacturers in this initiative will be explored. Finally, solutions are presented for better integration of CAD across MSFC in the future.

Acquisition and production of skilled behavior in dynamic decision-making tasks: Modeling strategic behavior in human-automation interaction: Why and aid can (and should) go unused

NASA Technical Reports Server (NTRS)

Kirlik, Alex

1991-01-01

Advances in computer and control technology offer the opportunity for task-offload aiding in human-machine systems. A task-offload aid (e.g., an autopilot, an intelligent assistant) can be selectively engaged by the human operator to dynamically delegate tasks to an automated system. Successful design and performance prediction in such systems requires knowledge of the factors influencing the strategy the operator develops and uses for managing interaction with the task-offload aid. A model is presented that shows how such strategies can be predicted as a function of three task context properties (frequency and duration of secondary tasks and costs of delaying secondary tasks) and three aid design properties (aid engagement and disengagement times, aid performance relative to human performance). Sensitivity analysis indicates how each of these contextual and design factors affect the optimal aid aid usage strategy and attainable system performance. The model is applied to understanding human-automation interaction in laboratory experiments on human supervisory control behavior. The laboratory task allowed subjects freedom to determine strategies for using an autopilot in a dynamic, multi-task environment. Modeling results suggested that many subjects may indeed have been acting appropriately by not using the autopilot in the way its designers intended. Although autopilot function was technically sound, this aid was not designed with due regard to the overall task context in which it was placed. These results demonstrate the need for additional research on how people may strategically manage their own resources, as well as those provided by automation, in an effort to keep workload and performance at acceptable levels.

Design of microstrip components by computer

NASA Technical Reports Server (NTRS)

Cisco, T. C.

1972-01-01

Development of computer programs for component analysis and design aids used in production of microstrip components is discussed. System includes designs for couplers, filters, circulators, transformers, power splitters, diode switches, and attenuators.

Analysis of Performance on Cognitive Test Measures Before, During, and After 6 Months of Hearing Aid Use: A Single-Subject Experimental Design.

PubMed

Desjardins, Jamie L

2016-06-01

The present study examined the effect of hearing aid use on cognitive test performance using a single-subject treatment design. Six participants 54 to 64 years old with sensorineural hearing loss were fitted with hearing aids. Participants used the hearing aids for approximately 8 hr each day for the duration of the study. A battery of cognitive tests was administered to participants during baseline (pre-hearing aid fitting), treatment (hearing aid use), and withdrawal (post-hearing aid use) study phases over a period of 6 months of hearing aid use. All participants showed significant improvements in performance on the cognitive test measures with hearing aid use. The most significant treatment effects were evidenced at 2 to 4 weeks of hearing aid use on the Listening Span Test and an auditory selective attention task. In many cases, cognitive performance scores returned to baseline levels after the participant stopped using the hearing aids. The findings from this study are consistent with the hypothesis that hearing aid use may improve cognitive performance by improving audibility and decreasing the cognitive load of the listening task.

Large Advanced Space Systems (LASS) computer-aided design program additions

NASA Technical Reports Server (NTRS)

Farrell, C. E.

1982-01-01

The LSS preliminary and conceptual design requires extensive iteractive analysis because of the effects of structural, thermal, and control intercoupling. A computer aided design program that will permit integrating and interfacing of required large space system (LSS) analyses is discussed. The primary objective of this program is the implementation of modeling techniques and analysis algorithms that permit interactive design and tradeoff studies of LSS concepts. Eight software modules were added to the program. The existing rigid body controls module was modified to include solar pressure effects. The new model generator modules and appendage synthesizer module are integrated (interfaced) to permit interactive definition and generation of LSS concepts. The mass properties module permits interactive specification of discrete masses and their locations. The other modules permit interactive analysis of orbital transfer requirements, antenna primary beam n, and attitude control requirements.

Integrated computer-aided design using minicomputers

NASA Technical Reports Server (NTRS)

Storaasli, O. O.

1980-01-01

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Extending Engineering Design Graphics Laboratories to Have a CAD/CAM Component: Implementation Issues.

ERIC Educational Resources Information Center

Juricic, Davor; Barr, Ronald E.

1996-01-01

Reports on a project that extended the Engineering Design Graphics curriculum to include instruction and laboratory experience in computer-aided design, analysis, and manufacturing (CAD/CAM). Discusses issues in project implementation, including introduction of finite element analysis to lower-division students, feasibility of classroom prototype…

Use of interactive graphics in bridge analysis and design.

DOT National Transportation Integrated Search

1983-01-01

This study evaluated the role of computer-aided design (CAD), including interactive graphics, in engineering design applications, especially in the design activities of the Virginia Department of Highways and Transportation. A review of the hardware ...

The Effectiveness of Teaching Aids for Elementary Students' Renewable Energy Learning and an Analysis of Their Energy Attitude Formation

ERIC Educational Resources Information Center

Chou, Ying-Chyi; Yen, Hsin-Yi; Yen, Hong-Wei; Chao, Yu-Long; Huang, Ying-Hsiu

2015-01-01

As an examination of the influences of a renewable energy teaching activity employing teaching aids on elementary students' knowledge of, attitude toward, and behavior of energy saving and carbon reduction, this study designed a teaching experiment in which experimental group was subjected to the teaching with four teaching aids for students to…

A Job Aid Solution to the Need for Low Cost, Results Oriented Dental Laboratory Manufacturing Industry Training.

ERIC Educational Resources Information Center

Selg, Timothy E.

A thesis project was conducted to design, develop, implement, and evaluate a job aid used by shipping department employees in a dental laboratory. The job aid was developed in preference to training to solve the organization's performance problem. Task analysis was performed to identify the shipping clerks' duties. These tasks were stated in the…

Modeling and Development of INS-Aided PLLs in a GNSS/INS Deeply-Coupled Hardware Prototype for Dynamic Applications

PubMed Central

Zhang, Tisheng; Niu, Xiaoji; Ban, Yalong; Zhang, Hongping; Shi, Chuang; Liu, Jingnan

2015-01-01

A GNSS/INS deeply-coupled system can improve the satellite signals tracking performance by INS aiding tracking loops under dynamics. However, there was no literature available on the complete modeling of the INS branch in the INS-aided tracking loop, which caused the lack of a theoretical tool to guide the selections of inertial sensors, parameter optimization and quantitative analysis of INS-aided PLLs. This paper makes an effort on the INS branch in modeling and parameter optimization of phase-locked loops (PLLs) based on the scalar-based GNSS/INS deeply-coupled system. It establishes the transfer function between all known error sources and the PLL tracking error, which can be used to quantitatively evaluate the candidate inertial measurement unit (IMU) affecting the carrier phase tracking error. Based on that, a steady-state error model is proposed to design INS-aided PLLs and to analyze their tracking performance. Based on the modeling and error analysis, an integrated deeply-coupled hardware prototype is developed, with the optimization of the aiding information. Finally, the performance of the INS-aided PLLs designed based on the proposed steady-state error model is evaluated through the simulation and road tests of the hardware prototype. PMID:25569751

Qualitative analysis of decision making by speech-language pathologists in the design of aided visual displays.

PubMed

McFadd, Emily; Wilkinson, Krista

2010-06-01

For children with complex communication needs, augmentative and alternative communication (AAC) devices offer a functional way to communicate thoughts and feelings. Despite many significant advances in the field, effective and efficient aided communication can remain a challenge for some clients and their partners. One critical element of aided AAC intervention is systematic attention to the design of the communication display itself. A well-designed display will foster communication outcomes; a poorly designed one might have the opposite effect. Surprisingly, to our knowledge there are no studies of the strategies that clinicians actually employ when putting together a display. In this research note, we examine, on a case-by-case basis, the strategies six clinicians used when constructing display pages, as a means of highlighting potential areas that might warrant systematic research on display design.

COINGRAD; Control Oriented Interactive Graphical Analysis and Design.

ERIC Educational Resources Information Center

Volz, Richard A.; And Others

The computer is currently a vital tool in engineering analysis and design. With the introduction of moderately priced graphics terminals, it will become even more important in the future as rapid graphic interaction between the engineer and the computer becomes more feasible in computer-aided design (CAD). To provide a vehicle for introducing…

NAVSIM 2: A computer program for simulating aided-inertial navigation for aircraft

NASA Technical Reports Server (NTRS)

Bjorkman, William S.

1987-01-01

NAVSIM II, a computer program for analytical simulation of aided-inertial navigation for aircraft, is described. The description is supported by a discussion of the program's application to the design and analysis of aided-inertial navigation systems as well as instructions for utilizing the program and for modifying it to accommodate new models, constraints, algorithms and scenarios. NAVSIM II simulates an airborne inertial navigation system built around a strapped-down inertial measurement unit and aided in its function by GPS, Doppler radar, altimeter, airspeed, and position-fix measurements. The measurements are incorporated into the navigation estimate via a UD-form Kalman filter. The simulation was designed and implemented using structured programming techniques and with particular attention to user-friendly operation.

Computer-aided system design

NASA Technical Reports Server (NTRS)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

A SINDA thermal model using CAD/CAE technologies

NASA Technical Reports Server (NTRS)

Rodriguez, Jose A.; Spencer, Steve

1992-01-01

The approach to thermal analysis described by this paper is a technique that incorporates Computer Aided Design (CAD) and Computer Aided Engineering (CAE) to develop a thermal model that has the advantages of Finite Element Methods (FEM) without abandoning the unique advantages of Finite Difference Methods (FDM) in the analysis of thermal systems. The incorporation of existing CAD geometry, the powerful use of a pre and post processor and the ability to do interdisciplinary analysis, will be described.

Integrated Computer-Aided Drafting Instruction (ICADI).

ERIC Educational Resources Information Center

Chen, C. Y.; McCampbell, David H.

Until recently, computer-aided drafting and design (CAD) systems were almost exclusively operated on mainframes or minicomputers and their cost prohibited many schools from offering CAD instruction. Today, many powerful personal computers are capable of performing the high-speed calculation and analysis required by the CAD application; however,…

Camera Layout Design for the Upper Stage Thrust Cone

NASA Technical Reports Server (NTRS)

Wooten, Tevin; Fowler, Bart

2010-01-01

Engineers in the Integrated Design and Analysis Division (EV30) use a variety of different tools to aid in the design and analysis of the Ares I vehicle. One primary tool in use is Pro-Engineer. Pro-Engineer is a computer-aided design (CAD) software that allows designers to create computer generated structural models of vehicle structures. For the Upper State thrust cone, Pro-Engineer was used to assist in the design of a layout for two camera housings. These cameras observe the separation between the first and second stage of the Ares I vehicle. For the Ares I-X, one standard speed camera was used. The Ares I design calls for two separate housings, three cameras, and a lighting system. With previous design concepts and verification strategies in mind, a new layout for the two camera design concept was developed with members of the EV32 team. With the new design, Pro-Engineer was used to draw the layout to observe how the two camera housings fit with the thrust cone assembly. Future analysis of the camera housing design will verify the stability and clearance of the camera with other hardware present on the thrust cone.

Geometric modeling for computer aided design

NASA Technical Reports Server (NTRS)

Schwing, James L.; Olariu, Stephen

1995-01-01

The primary goal of this grant has been the design and implementation of software to be used in the conceptual design of aerospace vehicles particularly focused on the elements of geometric design, graphical user interfaces, and the interaction of the multitude of software typically used in this engineering environment. This has resulted in the development of several analysis packages and design studies. These include two major software systems currently used in the conceptual level design of aerospace vehicles. These tools are SMART, the Solid Modeling Aerospace Research Tool, and EASIE, the Environment for Software Integration and Execution. Additional software tools were designed and implemented to address the needs of the engineer working in the conceptual design environment. SMART provides conceptual designers with a rapid prototyping capability and several engineering analysis capabilities. In addition, SMART has a carefully engineered user interface that makes it easy to learn and use. Finally, a number of specialty characteristics have been built into SMART which allow it to be used efficiently as a front end geometry processor for other analysis packages. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand-alone, analysis codes. Resulting in a streamlining of the exchange of data between programs reducing errors and improving the efficiency. EASIE provides both a methodology and a collection of software tools to ease the task of coordinating engineering design and analysis codes.

[Efficacy of antiretroviral therapy and influencing factors for people living with HIV/AIDS in designated hospitals in Harbin].

PubMed

Zhao, P Y; Yu, X; Yang, K; Feng, S Y; Wang, F X; Wang, B Y

2016-05-01

To understand the efficacy of antiretroviral therapy for people living with HIV/AIDS and influencing factors; and provide evidence to improve the treatment of HIV infection and AIDS for the better life of the patients. A cross sectional study was conducted in designated AIDS hospitals in Harbin. A questionnaire was used to collect the information of the patients receiving treatment in these hospitals. The statistical analysis was done with software SAS 9.2 and Excel 2010. Univariate analysis was performed with t test and multivariate analysis was performed with ordinal logistic regression model. Wilcoxon ranks sum test was conducted to compare the CD4(+) T lymphocyte counts. The number of the patients receiving antiretroviral therapy was in increase in recent years. The HIV infection route was mainly homosexual contact. The CD4(+)T lymphocyte count of the patients increased at different levels after ≥6 months treatment(P<0.01). Household income(P<0.05), adherence to treatment plan or not(P<0.05), social relationship(P< 0.05), concern of economic cost(P<0.01)medication compliance(P<0.01)and initial level of CD4(+) T lymphocyte(P<0.01)were the influencing factors for antiretroviral therapy efficacy. In designated hospitals in Harbin, the number of the patients receiving HIV antiretroviral therapy kept to increase and the efficacy of the treatment was obvious.

Improved Foundry Castings Utilizing CAD/CAM (Computer Aided Design/ Computer Aided Manufacture). Volume 1. Overview

DTIC Science & Technology

1988-06-30

casting. 68 Figure 1-9: Line printer representation of roll solidification. 69 Figure I1-1: Test casting model. 76 Figure 11-2: Division of test casting...writing new casting analysis and design routines. The new routines would take advantage of advanced criteria for predicting casting soundness and cast...properties and technical advances in computer hardware and software. 11 2. CONCLUSIONS UPCAST, a comprehensive software package, has been developed for

Data engineering systems: Computerized modeling and data bank capabilities for engineering analysis

NASA Technical Reports Server (NTRS)

Kopp, H.; Trettau, R.; Zolotar, B.

1984-01-01

The Data Engineering System (DES) is a computer-based system that organizes technical data and provides automated mechanisms for storage, retrieval, and engineering analysis. The DES combines the benefits of a structured data base system with automated links to large-scale analysis codes. While the DES provides the user with many of the capabilities of a computer-aided design (CAD) system, the systems are actually quite different in several respects. A typical CAD system emphasizes interactive graphics capabilities and organizes data in a manner that optimizes these graphics. On the other hand, the DES is a computer-aided engineering system intended for the engineer who must operationally understand an existing or planned design or who desires to carry out additional technical analysis based on a particular design. The DES emphasizes data retrieval in a form that not only provides the engineer access to search and display the data but also links the data automatically with the computer analysis codes.

Identifying the needs of elderly, hearing-impaired persons: the importance and utility of hearing aid attributes.

PubMed

Meister, Hartmut; Lausberg, Isabel; Kiessling, Juergen; von Wedel, Hasso; Walger, Martin

2002-11-01

Older patients represent the majority of hearing-aid users. The needs of elderly, hearing-impaired subjects are not entirely identified. The present study aims to determine the importance of fundamental hearing-aid attributes and to elicit the utility of associated hypothetical hearing aids for older patients. This was achieved using a questionnaire-based conjoint analysis--a decompositional approach to preference measurement offering a realistic study design. A random sample of 200 experienced hearing-aid users participated in the study. Though three out of the six examined attributes revealed age-related dependencies, the only significant effect was found for the attribute "handling", which was considerably more important for older than younger hearing-aid users. A trend of decreasing importance of speech intelligibility in noise and increasing significance of speech in quiet was observed for subjects older than 70 years. In general, the utility of various hypothetical hearing aids was similar for older and younger subjects. Apart from the attribute "handling", older and younger subjects have comparable needs regarding hearing-aid features. On the basis of the examined attributes, there is no requirement for hearing aids designed specifically for elderly hearing-aid users, provided that ergonomic features are considered and the benefits of modern technology are made fully available for older patients.

Computer-aided design of polymers and composites

NASA Technical Reports Server (NTRS)

Kaelble, D. H.

1985-01-01

This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.

An application of computer aided requirements analysis to a real time deep space system

NASA Technical Reports Server (NTRS)

Farny, A. M.; Morris, R. V.; Hartsough, C.; Callender, E. D.; Teichroew, D.; Chikofsky, E.

1981-01-01

The entire procedure of incorporating the requirements and goals of a space flight project into integrated, time ordered sequences of spacecraft commands, is called the uplink process. The Uplink Process Control Task (UPCT) was created to examine the uplink process and determine ways to improve it. The Problem Statement Language/Problem Statement Analyzer (PSL/PSA) designed to assist the designer/analyst/engineer in the preparation of specifications of an information system is used as a supporting tool to aid in the analysis. Attention is given to a definition of the uplink process, the definition of PSL/PSA, the construction of a PSA database, the value of analysis to the study of the uplink process, and the PSL/PSA lessons learned.

Noise studies of communication systems using the SYSTID computer aided analysis program

NASA Technical Reports Server (NTRS)

Tranter, W. H.; Dawson, C. T.

1973-01-01

SYSTID computer aided design is a simple program for simulating data systems and communication links. A trial of the efficiency of the method was carried out by simulating a linear analog communication system to determine its noise performance and by comparing the SYSTID result with the result arrived at by theoretical calculation. It is shown that the SYSTID program is readily applicable to the analysis of these types of systems.

Multidisciplinary analysis of actively controlled large flexible spacecraft

NASA Technical Reports Server (NTRS)

Cooper, Paul A.; Young, John W.; Sutter, Thomas R.

1986-01-01

The control of Flexible Structures (COFS) program has supported the development of an analysis capability at the Langley Research Center called the Integrated Multidisciplinary Analysis Tool (IMAT) which provides an efficient data storage and transfer capability among commercial computer codes to aid in the dynamic analysis of actively controlled structures. IMAT is a system of computer programs which transfers Computer-Aided-Design (CAD) configurations, structural finite element models, material property and stress information, structural and rigid-body dynamic model information, and linear system matrices for control law formulation among various commercial applications programs through a common database. Although general in its formulation, IMAT was developed specifically to aid in the evaluation of the structures. A description of the IMAT system and results of an application of the system are given.

Correlates of HIV knowledge and Sexual risk behaviors among Female Military Personnel

PubMed Central

Essien, E. James; Monjok, Emmanuel; Chen, Hua; Abughosh, Susan; Ekong, Ernest; Peters, Ronald J.; Holmes, Laurens; Holstad, Marcia M.; Mgbere, Osaro

2010-01-01

Objective Uniformed services personnel are at an increased risk of HIV infection. We examined the HIV/AIDS knowledge and sexual risk behaviors among female military personnel to determine the correlates of HIV risk behaviors in this population. Method The study used a cross-sectional design to examine HIV/AIDS knowledge and sexual risk behaviors in a sample of 346 females drawn from two military cantonments in Southwestern Nigeria. Data was collected between 2006 and 2008. Using bivariate analysis and multivariate logistic regression, HIV/AIDS knowledge and sexual behaviors were described in relation to socio-demographic characteristics of the participants. Results Multivariate logistic regression analysis revealed that level of education and knowing someone with HIV/AIDS were significant (p<0.05) predictors of HIV knowledge in this sample. HIV prevention self-efficacy was significantly (P<0.05) predicted by annual income and race/ethnicity. Condom use attitudes were also significantly (P<0.05) associated with number of children, annual income, and number of sexual partners. Conclusion Data indicates the importance of incorporating these predictor variables into intervention designs. PMID:20387111

Evaluation of a Modified User Guide for Hearing Aid Management.

PubMed

Caposecco, Andrea; Hickson, Louise; Meyer, Carly; Khan, Asaduzzaman

2016-01-01

This study investigated if a hearing aid user guide modified using best practice principles for health literacy resulted in superior ability to perform hearing aid management tasks, compared with the user guide in the original form. This research utilized a two-arm study design to compare the original manufacturer's user guide with a modified user guide for the same hearing aid--an Oticon Acto behind-the-ear aid with an open dome. The modified user guide had a lower reading grade level (4.2 versus 10.5), used a larger font size, included more graphics, and had less technical information. Eighty-nine adults ages 55 years and over were included in the study; none had experience with hearing aid use or management. Participants were randomly assigned either the modified guide (n = 47) or the original guide (n = 42). All participants were administered the Hearing Aid Management test, designed for this study, which assessed their ability to perform seven management tasks (e.g., change battery) with their assigned user guide. The regression analysis indicated that the type of user guide was significantly associated with performance on the Hearing Aid Management test, adjusting for 11 potential covariates. In addition, participants assigned the modified guide required significantly fewer prompts to perform tasks and were significantly more likely to perform four of the seven tasks without the need for prompts. The median time taken by those assigned the modified guide was also significantly shorter for three of the tasks. Other variables associated with performance on the Hearing Aid Management test were health literacy level, finger dexterity, and age. Findings indicate that the need to design hearing aid user guides in line with best practice principles of health literacy as a means of facilitating improved hearing aid management in older adults.

Vehicle Sketch Pad: a Parametric Geometry Modeler for Conceptual Aircraft Design

NASA Technical Reports Server (NTRS)

Hahn, Andrew S.

2010-01-01

The conceptual aircraft designer is faced with a dilemma, how to strike the best balance between productivity and fidelity? Historically, handbook methods have required only the coarsest of geometric parameterizations in order to perform analysis. Increasingly, there has been a drive to upgrade analysis methods, but these require considerably more precise and detailed geometry. Attempts have been made to use computer-aided design packages to fill this void, but their cost and steep learning curve have made them unwieldy at best. Vehicle Sketch Pad (VSP) has been developed over several years to better fill this void. While no substitute for the full feature set of computer-aided design packages, VSP allows even novices to quickly become proficient in defining three-dimensional, watertight aircraft geometries that are adequate for producing multi-disciplinary meta-models for higher order analysis methods, wind tunnel and display models, as well as a starting point for animation models. This paper will give an overview of the development and future course of VSP.

Multidisciplinary analysis and design of printed wiring boards

NASA Astrophysics Data System (ADS)

Fulton, Robert E.; Hughes, Joseph L.; Scott, Waymond R., Jr.; Umeagukwu, Charles; Yeh, Chao-Pin

1991-04-01

Modern printed wiring board design depends on electronic prototyping using computer-based simulation and design tools. Existing electrical computer-aided design (ECAD) tools emphasize circuit connectivity with only rudimentary analysis capabilities. This paper describes a prototype integrated PWB design environment denoted Thermal Structural Electromagnetic Testability (TSET) being developed at Georgia Tech in collaboration with companies in the electronics industry. TSET provides design guidance based on enhanced electrical and mechanical CAD capabilities including electromagnetic modeling testability analysis thermal management and solid mechanics analysis. TSET development is based on a strong analytical and theoretical science base and incorporates an integrated information framework and a common database design based on a systematic structured methodology.

Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

NASA Technical Reports Server (NTRS)

Thorp, Scott A.

1992-01-01

This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

Attitudes of pediatric intensive care unit physicians towards the use of cognitive aids: a qualitative study.

PubMed

Weiss, Matthew J; Kramer, Chelsea; Tremblay, Sébastien; Côté, Luc

2016-05-21

Cognitive aids are increasingly recommended in clinical practice, yet little is known about the attitudes of physicians towards these tools. We employed a qualitative, descriptive design to explore physician attitudes towards cognitive aids in pediatric intensive care units (PICUs). Semi-structured interviews elicited the opinions of a convenience sample of practicing PICU physicians towards the use of cognitive aids. We analyzed interview data for thematic content to examine the three factors of intention to use cognitive aids as defined by the Theory of Planned Behavior (TPB), attitudes, social norms, and perceived control. Analysis of 14 interviews suggested that in the PICU setting, cognitive aids are widely used. Discovered themes related to their use touched on all three TPB factors of intention and included: aids are perceived to improve team communication; aids may improve patient safety; aids may hinder clinician judgment; physicians may resist implementation if it occurs prior to demonstration of benefit; effective adoption requires cognitive aids to be integrated into local workplace culture; and implementation should take physician concerns into account. Our sample of PICU physicians were open to cognitive aids in their practice, as long as such aids preserve the primacy of clinical judgment, focus on team communication, demonstrate effectiveness through preliminary testing, and are designed and implemented with the local culture and work environment in mind. Future knowledge translation efforts to implement cognitive aids would benefit from consideration of these issues.

The theory, design, and operation of the suppressed carrier data-aided tracking receiver

NASA Technical Reports Server (NTRS)

Simon, M. K.; Springett, J. C.

1973-01-01

A viable, efficient, and easily mechanized carrier regenerating receiver for use in suppressed carrier-tracking system is described. The receiver referred to as a data-aided receiver (DAR) incorporates a data-aided loop (DAL) which provides the required carrier reference signal. The DAL employs the principle of decision feedback and as such is more efficient than other forms of suppressed carrier-tracking loops. The analysis, design, and implementation of the DAR are covered in detail. Performance comparisons and mechanization tradeoffs are made, wherever possible, with discrete carrier systems and other suppressed carrier systems presently in use. Experimental performance verification is given throughout in support of the theory presented.

Surface Modeling, Solid Modeling and Finite Element Modeling. Analysis Capabilities of Computer-Assisted Design and Manufacturing Systems.

ERIC Educational Resources Information Center

Nee, John G.; Kare, Audhut P.

1987-01-01

Explores several concepts in computer assisted design/computer assisted manufacturing (CAD/CAM). Defines, evaluates, reviews and compares advanced computer-aided geometric modeling and analysis techniques. Presents the results of a survey to establish the capabilities of minicomputer based-systems with the CAD/CAM packages evaluated. (CW)

Alternatives for Developing User Documentation for Applications Software

DTIC Science & Technology

1991-09-01

style that is designed to match adult reading behaviors, using reader-based writing techniques, developing effective graphics , creating reference aids...involves research, analysis, design , and testing. The writer must have a solid understanding of the technical aspects of the document being prepared, good...ABSTRACT The preparation of software documentation is an iterative process that involves research, analysis, design , and testing. The writer must have

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

NASA Technical Reports Server (NTRS)

Lahoti, G. D.; Akgerman, N.; Altan, T.

1978-01-01

Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

Measuring Stigma in Older and Younger Adults with HIV/AIDS: An Analysis of an HIV Stigma Scale and Initial Exploration of Subscales

ERIC Educational Resources Information Center

Emlet, Charles A.

2005-01-01

The purpose of this study is to explore the validity of a scale designed to measure HIV stigma and identify potential subscales. A nonrandom sample of 88 individuals, 44 between the ages of 20 and 39 and 44 ages 50 and older, living with HIV/AIDS were interviewed and completed a 13-item HIV Stigma Scale. An exploratory factor analysis (EFA) found…

A computer-aided design system geared toward conceptual design in a research environment. [for hypersonic vehicles

NASA Technical Reports Server (NTRS)

STACK S. H.

1981-01-01

A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

Relationship Between Health Literacy, Knowledge of Health Status, and Beliefs about HIV/AIDS Transmission among Ryan White Clients in Miami

ERIC Educational Resources Information Center

Mooss, Angela; Brock-Getz, Petra; Ladner, Robert; Fiano, Theresa

2013-01-01

Objective: The aim of this study was to examine the relationships between health literacy, knowledge of health status, and human immunodeficiency virus/acquired immune deficiency syndrome (HIV/AIDS) transmission beliefs among recipients of Ryan White care. Design: Quota and convenience sampled, quantitative analysis captured with closed and…

Computer aided design and manufacturing: analysis and development of research issues

NASA Astrophysics Data System (ADS)

Taylor, K.; Jadeja, J. C.

2005-11-01

The paper focuses on the current issues in the areas of computer aided manufacturing and design. The importance of integrating CAD and CAM is analyzed. The associated issues with the integration and recent advancements in this field have been documented. The development of methods for enhancing productivity is explored. A research experiment was conducted in the laboratories of West Virginia University with an objective to portray effects of various machining parameters on production. Graphical results and their interpretations are supplied to better realize the main purpose of the experimentation.

Computer aided drug design

NASA Astrophysics Data System (ADS)

Jain, A.

2017-08-01

Computer based method can help in discovery of leads and can potentially eliminate chemical synthesis and screening of many irrelevant compounds, and in this way, it save time as well as cost. Molecular modeling systems are powerful tools for building, visualizing, analyzing and storing models of complex molecular structure that can help to interpretate structure activity relationship. The use of various techniques of molecular mechanics and dynamics and software in Computer aided drug design along with statistics analysis is powerful tool for the medicinal chemistry to synthesis therapeutic and effective drugs with minimum side effect.

Using CASE Software to Teach Undergraduates Systems Analysis and Design.

ERIC Educational Resources Information Center

Wilcox, Russell E.

1988-01-01

Describes the design and delivery of a college course for information system students utilizing a Computer-Aided Software Engineering program. Discusses class assignments, cooperative learning, student attitudes, and the advantages of using this software in the course. (CW)

Aid effectiveness and programmatic effectiveness: a proposed framework for comparative evaluation of different aid interventions in a particular health system.

PubMed

Haque, Hasibul; Hill, Philip C; Gauld, Robin

2017-01-01

Against a backdrop of changing concepts of aid effectiveness, development effectiveness, health systems strengthening, and increasing emphasis on impact evaluation, this article proposes a theory-driven impact evaluation framework to gauge the effect of aid effectiveness principles on programmatic outcomes of different aid funded programs in the health sector of a particular country. The foundation and step-by-step process of implementing the framework are described. With empirical evidence from the field, the steps involve analysis of context, program designs, implementation mechanisms, outcomes, synthesis, and interpretation of findings through the programs' underlying program theories and interactions with the state context and health system. The framework can be useful for comparatively evaluating different aid interventions both in fragile and non-fragile state contexts.

Aiding planning in air traffic control: an experimental investigation of the effects of perceptual information integration.

PubMed

Moertl, Peter M; Canning, John M; Gronlund, Scott D; Dougherty, Michael R P; Johansson, Joakim; Mills, Scott H

2002-01-01

Prior research examined how controllers plan in their traditional environment and identified various information uncertainties as detriments to planning. A planning aid was designed to reduce this uncertainty by perceptually representing important constraints. This included integrating spatial information on the radar screen with discrete information (planned sequences of air traffic). Previous research reported improved planning performance and decreased workload in the planning aid condition. The purpose of this paper was to determine the source of these performance improvements. Analysis of computer interactions using log-linear modeling showed that the planning interface led to less repetitive--but more integrated--information retrieval compared with the traditional planning environment. Ecological interface design principles helped explain how the integrated information retrieval gave rise to the performance improvements. Actual or potential applications of this research include the design and evaluation of interface automation that keeps users in active control by modification of perceptual task characteristics.

Managing fear in public health campaigns: a theory-based formative evaluation process.

PubMed

Cho, Hyunyi; Witte, Kim

2005-10-01

The HIV/AIDS infection rate of Ethiopia is one of the world's highest. Prevention campaigns should systematically incorporate and respond to at-risk population's existing beliefs, emotions, and perceived barriers in the message design process to effectively promote behavior change. However, guidelines for conducting formative evaluation that are grounded in proven risk communication theory and empirical data analysis techniques are hard to find. This article provides a five-step formative evaluation process that translates theory and research for developing effective messages for behavior change. Guided by the extended parallel process model, the five-step process helps message designers manage public's fear surrounding issues such as HIV/AIDS. An entertainment education project that used the process to design HIV/AIDS prevention messages for Ethiopian urban youth is reported. Data were collected in five urban regions of Ethiopia and analyzed according to the process to develop key messages for a 26-week radio soap opera.

Computer Graphics-aided systems analysis: application to well completion design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detamore, J.E.; Sarma, M.P.

1985-03-01

The development of an engineering tool (in the form of a computer model) for solving design and analysis problems related with oil and gas well production operations is discussed. The development of the method is based on integrating the concepts of ''Systems Analysis'' with the techniques of ''Computer Graphics''. The concepts behind the method are very general in nature. This paper, however, illustrates the application of the method in solving gas well completion design problems. The use of the method will save time and improve the efficiency of such design and analysis problems. The method can be extended to othermore » design and analysis aspects of oil and gas wells.« less

Needs Analysis for Graphic Design Learning Module Based on Technology & Learning Styles of Deaf Students

ERIC Educational Resources Information Center

Ibrahim, Zainuddin; Alias, Norlidah; Nordin, Abu Bakar

2016-01-01

The field of Information Communication Technology has offered a promising future for deaf students. Web design, animation, and multimedia application design are a branch of graphic design area, which aim to aid their learning visually. However, most of the technical terms cannot be interpreted in Malaysian sign language. Moreover, the development…

MSIX - A general and user-friendly platform for RAM analysis

NASA Astrophysics Data System (ADS)

Pan, Z. J.; Blemel, Peter

The authors present a CAD (computer-aided design) platform supporting RAM (reliability, availability, and maintainability) analysis with efficient system description and alternative evaluation. The design concepts, implementation techniques, and application results are described. This platform is user-friendly because of its graphic environment, drawing facilities, object orientation, self-tutoring, and access to the operating system. The programs' independency and portability make them generally applicable to various analysis tasks.

Point process methods in epidemiology: application to the analysis of human immunodeficiency virus/acquired immunodeficiency syndrome mortality in urban areas.

PubMed

Quesada, Jose Antonio; Melchor, Inmaculada; Nolasco, Andreu

2017-05-26

The analysis of spatio-temporal patterns of disease or death in urban areas has been developed mainly from the ecological studies approach. These designs may have some limitations like the ecological fallacy and instability with few cases. The objective of this study was to apply the point process methodology, as a complement to that of aggregated data, to study HIV/AIDS mortality in men in the city of Alicante (Spain). A case-control study in residents in the city during the period 2004-2011 was designed. Cases were men who died from HIV/AIDS and controls represented the general population, matched by age to cases. The risk surfaces of death over the city were estimated using the log-risk function of intensities, and we contrasted their temporal variations over the two periods. High risk significant areas of death by HIV/AIDS, which coincide with the most deprived areas in the city, were detected. Significant spatial change of the areas at risk between the periods studied was not detected. The point process methodology is a useful tool to analyse the patterns of death by HIV/AIDS in urban areas.

Computer-aided system of evaluation for population-based all-in-one service screening (CASE-PASS): from study design to outcome analysis with bias adjustment.

PubMed

Chen, Li-Sheng; Yen, Amy Ming-Fang; Duffy, Stephen W; Tabar, Laszlo; Lin, Wen-Chou; Chen, Hsiu-Hsi

2010-10-01

Population-based routine service screening has gained popularity following an era of randomized controlled trials. The evaluation of these service screening programs is subject to study design, data availability, and the precise data analysis for adjusting bias. We developed a computer-aided system that allows the evaluation of population-based service screening to unify these aspects and facilitate and guide the program assessor to efficiently perform an evaluation. This system underpins two experimental designs: the posttest-only non-equivalent design and the one-group pretest-posttest design and demonstrates the type of data required at both the population and individual levels. Three major analyses were developed that included a cumulative mortality analysis, survival analysis with lead-time adjustment, and self-selection bias adjustment. We used SAS AF software to develop a graphic interface system with a pull-down menu style. We demonstrate the application of this system with data obtained from a Swedish population-based service screen and a population-based randomized controlled trial for the screening of breast, colorectal, and prostate cancer, and one service screening program for cervical cancer with Pap smears. The system provided automated descriptive results based on the various sources of available data and cumulative mortality curves corresponding to the study designs. The comparison of cumulative survival between clinically and screen-detected cases without a lead-time adjustment are also demonstrated. The intention-to-treat and noncompliance analysis with self-selection bias adjustments are also shown to assess the effectiveness of the population-based service screening program. Model validation was composed of a comparison between our adjusted self-selection bias estimates and the empirical results on effectiveness reported in the literature. We demonstrate a computer-aided system allowing the evaluation of population-based service screening programs with an adjustment for self-selection and lead-time bias. This is achieved by providing a tutorial guide from the study design to the data analysis, with bias adjustment. Copyright © 2010 Elsevier Inc. All rights reserved.

Computer-aided roll pass design in rolling of airfoil shapes

NASA Technical Reports Server (NTRS)

Akgerman, N.; Lahoti, G. D.; Altan, T.

1980-01-01

This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

Design Evaluation for Personnel, Training and Human Factors (DEPTH) Final Report.

DTIC Science & Technology

1998-01-17

human activity was primarily intended to facilitate man-machine design analyses of complex systems. By importing computer aided design (CAD) data, the human figure models and analysis algorithms can help to ensure components can be seen, reached, lifted and removed by most maintainers. These simulations are also useful for logistics data capture, training, and task analysis. DEPTH was also found to be useful in obtaining task descriptions for technical

A Visual Decision Aid for Gear Materials Selection

NASA Astrophysics Data System (ADS)

Maity, S. R.; Chakraborty, S.

2013-10-01

Materials play an important role during the entire design process and the designers need to identify materials with specific functionalities in order to find out feasible design concepts. While selecting materials for engineering designs from an ever-increasing array of alternatives, with each having its own characteristics, applications, advantages and limitations, a clear understanding of the functional requirements for each individual component is required and various important criteria need to be considered. Although various approaches have already been adopted by the past researchers to solve the material selection problems, they all require profound knowledge in mathematics from the part of the designers for their implementation. This paper proposes the application of an integrated preference ranking organization method for enrichment evaluation and geometrical analysis for interactive aid method as a visual decision aid for material selection. Two real time gear material selection problems are solved which prove the potentiality and usefulness of this combined approach. It is observed that Nitralloy 135M and Nylon glass fiber reinforced 6/6 are respectively the choicest metallic and non-metallic gear materials.

Google Calendar: A single case experimental design study of a man with severe memory problems

PubMed Central

Baldwin, Victoria N.; Powell, Theresa

2015-01-01

A single case experimental design across behaviours was utilised to explore the effectiveness of Google Calendar text alerts delivered to a mobile phone as a memory aid. The participant was a 43-year-old man (JA) with severe memory problems and executive difficulties caused by a traumatic brain injury (TBI). JA was initially very unwilling to use any memory aid and so a detailed assessment of his beliefs about memory aids, his cognitive difficulties and his social context was performed and a set of specifications for an aid was produced collaboratively. Six weeks of baseline data and six weeks of intervention data were collected for three target memory behaviours and three control memory behaviours. Results were analysed using nonoverlap of all pairs (NAP) analysis which showed a reduction in forgetting in the three target behaviours and no change in two of the three control behaviours. A subjective measure (the revised Everyday Memory Questionnaire) also suggested improvement. This study illustrates that Google Calendar is a highly effective memory aid and emphasises the importance of choosing a memory aid to suit the person's lifestyle and beliefs. PMID:25263266

Geometric modeling for computer aided design

NASA Technical Reports Server (NTRS)

Schwing, James L.

1993-01-01

Over the past several years, it has been the primary goal of this grant to design and implement software to be used in the conceptual design of aerospace vehicles. The work carried out under this grant was performed jointly with members of the Vehicle Analysis Branch (VAB) of NASA LaRC, Computer Sciences Corp., and Vigyan Corp. This has resulted in the development of several packages and design studies. Primary among these are the interactive geometric modeling tool, the Solid Modeling Aerospace Research Tool (smart), and the integration and execution tools provided by the Environment for Application Software Integration and Execution (EASIE). In addition, it is the purpose of the personnel of this grant to provide consultation in the areas of structural design, algorithm development, and software development and implementation, particularly in the areas of computer aided design, geometric surface representation, and parallel algorithms.

Interactive design and analysis of future large spacecraft concepts

NASA Technical Reports Server (NTRS)

Garrett, L. B.

1981-01-01

An interactive computer aided design program used to perform systems level design and analysis of large spacecraft concepts is presented. Emphasis is on rapid design, analysis of integrated spacecraft, and automatic spacecraft modeling for lattice structures. Capabilities and performance of multidiscipline applications modules, the executive and data management software, and graphics display features are reviewed. A single user at an interactive terminal create, design, analyze, and conduct parametric studies of Earth orbiting spacecraft with relative ease. Data generated in the design, analysis, and performance evaluation of an Earth-orbiting large diameter antenna satellite are used to illustrate current capabilities. Computer run time statistics for the individual modules quantify the speed at which modeling, analysis, and design evaluation of integrated spacecraft concepts is accomplished in a user interactive computing environment.

Development of computer-aided design system of elastic sensitive elements of automatic metering devices

NASA Astrophysics Data System (ADS)

Kalinkina, M. E.; Kozlov, A. S.; Labkovskaia, R. I.; Pirozhnikova, O. I.; Tkalich, V. L.; Shmakov, N. A.

2018-05-01

The object of research is the element base of devices of control and automation systems, including in its composition annular elastic sensitive elements, methods of their modeling, calculation algorithms and software complexes for automation of their design processes. The article is devoted to the development of the computer-aided design system of elastic sensitive elements used in weight- and force-measuring automation devices. Based on the mathematical modeling of deformation processes in a solid, as well as the results of static and dynamic analysis, the calculation of elastic elements is given using the capabilities of modern software systems based on numerical simulation. In the course of the simulation, the model was a divided hexagonal grid of finite elements with a maximum size not exceeding 2.5 mm. The results of modal and dynamic analysis are presented in this article.

Failure modes and effects analysis automation

NASA Technical Reports Server (NTRS)

Kamhieh, Cynthia H.; Cutts, Dannie E.; Purves, R. Byron

1988-01-01

A failure modes and effects analysis (FMEA) assistant was implemented as a knowledge based system and will be used during design of the Space Station to aid engineers in performing the complex task of tracking failures throughout the entire design effort. The three major directions in which automation was pursued were the clerical components of the FMEA process, the knowledge acquisition aspects of FMEA, and the failure propagation/analysis portions of the FMEA task. The system is accessible to design, safety, and reliability engineers at single user workstations and, although not designed to replace conventional FMEA, it is expected to decrease by many man years the time required to perform the analysis.

Systems design and analysis of the microwave radiometer spacecraft

NASA Technical Reports Server (NTRS)

Garrett, L. B.

1981-01-01

Systems design and analysis data were generated for microwave radiometer spacecraft concept using the Large Advanced Space Systems (LASS) computer aided design and analysis program. Parametric analyses were conducted for perturbations off the nominal-orbital-altitude/antenna-reflector-size and for control/propulsion system options. Optimized spacecraft mass, structural element design, and on-orbit loading data are presented. Propulsion and rigid-body control systems sensitivities to current and advanced technology are established. Spacecraft-induced and environmental effects on antenna performance (surface accuracy, defocus, and boresight off-set) are quantified and structured material frequencies and modal shapes are defined.

WeSaySo Case Study: Designing and Implementing a Case Study for Use in an Instructional Design Class.

ERIC Educational Resources Information Center

Graves, Rick; Barnett, Mardee; Gamble, Yolanda; Kolak, Mike

A case study was used in an instructional design class to facilitate the transfer of conceptual knowledge to concrete concerns and to aid instructional technology graduate students' understanding of the steps involved in designing, analyzing, and implementing an effective needs analysis. The case study involved real events at fictitious company…

A novel integrated framework and improved methodology of computer-aided drug design.

PubMed

Chen, Calvin Yu-Chian

2013-01-01

Computer-aided drug design (CADD) is a critical initiating step of drug development, but a single model capable of covering all designing aspects remains to be elucidated. Hence, we developed a drug design modeling framework that integrates multiple approaches, including machine learning based quantitative structure-activity relationship (QSAR) analysis, 3D-QSAR, Bayesian network, pharmacophore modeling, and structure-based docking algorithm. Restrictions for each model were defined for improved individual and overall accuracy. An integration method was applied to join the results from each model to minimize bias and errors. In addition, the integrated model adopts both static and dynamic analysis to validate the intermolecular stabilities of the receptor-ligand conformation. The proposed protocol was applied to identifying HER2 inhibitors from traditional Chinese medicine (TCM) as an example for validating our new protocol. Eight potent leads were identified from six TCM sources. A joint validation system comprised of comparative molecular field analysis, comparative molecular similarity indices analysis, and molecular dynamics simulation further characterized the candidates into three potential binding conformations and validated the binding stability of each protein-ligand complex. The ligand pathway was also performed to predict the ligand "in" and "exit" from the binding site. In summary, we propose a novel systematic CADD methodology for the identification, analysis, and characterization of drug-like candidates.

[Judicial and medical/legal aspects of the responsibility of workers appointed to carry out first aid].

PubMed

Caprioli, L C; Ciavarella, M; Sacco, A

2005-01-01

One of the innovations introduced by law 626/94 [the Italian law on occupational health and safety of workers] is the obligation of the employer to designate workers responsible for first aid. To identify and discuss the duties, the role and the medical and legal responsibility of workers appointed to carry out first aid measures. Analysis of legislation and current practice concerning medical and legal responsibility in first aid procedures. The worker appointed to carry out first aid measures is, by virtue of his appointment, obliged to take action. Therefore, he could commit an illegitimate act both by "acting" and by "omitting" to carry out a duty that is his responsibility. In the first case the worker could be accused of committing an unpremeditated criminal offence when his actions involve negligence, imprudence, inexperience or violation of regulations concerning his duties. A "serious criminal offence" is committed when the most elementary rules of diligence, prudence and skill are violated; the offence is "slight" when negligence, imprudence or inexperience are involved in particularly complex situations. The reference parameter for inexperience is not a first aid volunteer, nor a member of the public, but a worker designated to carry out first aid possessing "average" attitudes, training and ability. Briefly, a guilty error by the appointed worker consists of the following: i) the professional conduct of the operator was clearly wrong, serious and unjustifiable; ii) the operator clearly omitted doing his/her duty; iii) the consequence of the error is physical personal damage. The observations made clearly illustrate the delicacy of the tasks of the worker appointed to carry out first aid measures. Essential elements for minimizing wrong and/or negligent conduct are appropriate choice of the designated workers and their adequate training.

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2010 CFR

2010-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2010-04-01 2010-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2014 CFR

2014-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2014-04-01 2014-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2013 CFR

2013-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2013-04-01 2013-04-01 false Does this part apply to all Federal-aid design-build...

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2012 CFR

2012-04-01

... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2012-04-01 2012-04-01 false Does this part apply to all Federal-aid design-build...

A dc model for power switching transistors suitable for computer-aided design and analysis

NASA Technical Reports Server (NTRS)

Wilson, P. M.; George, R. T., Jr.; Owen, H. A.; Wilson, T. G.

1979-01-01

A model for bipolar junction power switching transistors whose parameters can be readily obtained by the circuit design engineer, and which can be conveniently incorporated into standard computer-based circuit analysis programs is presented. This formulation results from measurements which may be made with standard laboratory equipment. Measurement procedures, as well as a comparison between actual and computed results, are presented.

Design Recovery for Software Library Population

DTIC Science & Technology

1992-12-01

increase understandability, efficiency, and maintainability of the software and the design. A good representation choice will also aid in...required for a reengineering project. It details the analysis and planning phase and gives good criteria for determining the need for a reengineering...because it deals with all of these issues. With his complete description of the analysis and planning phase, Byrne has a good foundation for

Composite structural materials. [aircraft applications

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1981-01-01

The development of composite materials for aircraft applications is addressed with specific consideration of physical properties, structural concepts and analysis, manufacturing, reliability, and life prediction. The design and flight testing of composite ultralight gliders is documented. Advances in computer aided design and methods for nondestructive testing are also discussed.

Two-port network analysis and modeling of a balanced armature receiver.

PubMed

Kim, Noori; Allen, Jont B

2013-07-01

Models for acoustic transducers, such as loudspeakers, mastoid bone-drivers, hearing-aid receivers, etc., are critical elements in many acoustic applications. Acoustic transducers employ two-port models to convert between acoustic and electromagnetic signals. This study analyzes a widely-used commercial hearing-aid receiver ED series, manufactured by Knowles Electronics, Inc. Electromagnetic transducer modeling must consider two key elements: a semi-inductor and a gyrator. The semi-inductor accounts for electromagnetic eddy-currents, the 'skin effect' of a conductor (Vanderkooy, 1989), while the gyrator (McMillan, 1946; Tellegen, 1948) accounts for the anti-reciprocity characteristic [Lenz's law (Hunt, 1954, p. 113)]. Aside from Hunt (1954), no publications we know of have included the gyrator element in their electromagnetic transducer models. The most prevalent method of transducer modeling evokes the mobility method, an ideal transformer instead of a gyrator followed by the dual of the mechanical circuit (Beranek, 1954). The mobility approach greatly complicates the analysis. The present study proposes a novel, simplified and rigorous receiver model. Hunt's two-port parameters, the electrical impedance Ze(s), acoustic impedance Za(s) and electro-acoustic transduction coefficient Ta(s), are calculated using ABCD and impedance matrix methods (Van Valkenburg, 1964). The results from electrical input impedance measurements Zin(s), which vary with given acoustical loads, are used in the calculation (Weece and Allen, 2010). The hearing-aid receiver transducer model is designed based on energy transformation flow [electric→ mechanic→ acoustic]. The model has been verified with electrical input impedance, diaphragm velocity in vacuo, and output pressure measurements. This receiver model is suitable for designing most electromagnetic transducers and it can ultimately improve the design of hearing-aid devices by providing a simplified yet accurate, physically motivated analysis. This article is part of a special issue entitled "MEMRO 2012". Published by Elsevier B.V.

The application of computer-aided technologies in automotive styling design

NASA Astrophysics Data System (ADS)

Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

2012-04-01

In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

Computational System For Rapid CFD Analysis In Engineering

NASA Technical Reports Server (NTRS)

Barson, Steven L.; Ascoli, Edward P.; Decroix, Michelle E.; Sindir, Munir M.

1995-01-01

Computational system comprising modular hardware and software sub-systems developed to accelerate and facilitate use of techniques of computational fluid dynamics (CFD) in engineering environment. Addresses integration of all aspects of CFD analysis process, including definition of hardware surfaces, generation of computational grids, CFD flow solution, and postprocessing. Incorporates interfaces for integration of all hardware and software tools needed to perform complete CFD analysis. Includes tools for efficient definition of flow geometry, generation of computational grids, computation of flows on grids, and postprocessing of flow data. System accepts geometric input from any of three basic sources: computer-aided design (CAD), computer-aided engineering (CAE), or definition by user.

Marginal Structural Models for Case-Cohort Study Designs to Estimate the Association of Antiretroviral Therapy Initiation With Incident AIDS or Death

PubMed Central

Cole, Stephen R.; Hudgens, Michael G.; Tien, Phyllis C.; Anastos, Kathryn; Kingsley, Lawrence; Chmiel, Joan S.; Jacobson, Lisa P.

2012-01-01

To estimate the association of antiretroviral therapy initiation with incident acquired immunodeficiency syndrome (AIDS) or death while accounting for time-varying confounding in a cost-efficient manner, the authors combined a case-cohort study design with inverse probability-weighted estimation of a marginal structural Cox proportional hazards model. A total of 950 adults who were positive for human immunodeficiency virus type 1 were followed in 2 US cohort studies between 1995 and 2007. In the full cohort, 211 AIDS cases or deaths occurred during 4,456 person-years. In an illustrative 20% random subcohort of 190 participants, 41 AIDS cases or deaths occurred during 861 person-years. Accounting for measured confounders and determinants of dropout by inverse probability weighting, the full cohort hazard ratio was 0.41 (95% confidence interval: 0.26, 0.65) and the case-cohort hazard ratio was 0.47 (95% confidence interval: 0.26, 0.83). Standard multivariable-adjusted hazard ratios were closer to the null, regardless of study design. The precision lost with the case-cohort design was modest given the cost savings. Results from Monte Carlo simulations demonstrated that the proposed approach yields approximately unbiased estimates of the hazard ratio with appropriate confidence interval coverage. Marginal structural model analysis of case-cohort study designs provides a cost-efficient design coupled with an accurate analytic method for research settings in which there is time-varying confounding. PMID:22302074

Applying the COM-B behaviour model and behaviour change wheel to develop an intervention to improve hearing-aid use in adult auditory rehabilitation.

PubMed

Barker, Fiona; Atkins, Lou; de Lusignan, Simon

2016-07-01

To introduce a psychological model of behaviour; the COM-B model and describe how this has been used in combination with the behaviour change wheel (BCW) in developing an intervention which aims to promote regular, long-term use of hearing aids by adults with acquired hearing loss. Qualitative structured interview study using the COM-B model to identify the determinants of behavioural planning on the part of audiologists; a potentially important factor in encouraging long-term hearing-aid use. Ten audiologists drawn from a random sample of five English audiology departments. The analysis suggests that behavioural planning might be more likely to occur if audiologists' psychological capability, physical and social opportunity, and reflective and automatic motivation were addressed. This analysis forms the basis of an intervention design, using the BCW, to encourage behavioural planning by audiologists and subsequent hearing-aid use by people with hearing loss. The COM-B model and BCW can be applied successfully in the context of audiology to analyse the behaviour of both people with hearing loss and professionals working with them, supplying information that is being used in intervention design. The effectiveness of the intervention will be tested in a clinical trial.

Navigation and Alignment Aids Concept of Operations and Supplemental Design Information. Revision A

NASA Technical Reports Server (NTRS)

Kelly, Sean M.; Cryan, Scott P.

2016-01-01

The IDSS Navigation and Alignment Aids Concept of Operations and Supplemental Design Information document provides supplemental information to the IDSS IDD. The guide provides insight into the navigation and alignment aids design, and how those aids can be utilized by incoming vehicles for proximity operations and docking. The navigation aids are paramount to successful docking.

Proceedings of the NASTRAN (Tradename) Users’ Colloquium (14th) Held in San Diego, California on 5-9 May 1986

DTIC Science & Technology

1986-05-01

4. Bossi, J. A., Price, G. A., and Winkleblack, S. A., " Flexible Spacecraft Controller Design Using the Integrated Analysis Capability (IAC)," AIAA...P., "Integrated Control System Design Capabilities at the Goddard Space Flight Center," Pro- ceedings of the 2nd IEEE Control Systems Society...Symposium on Computer- Aided Control System Design (CACSD), Santa Barbara, California, March, 13-15 1985. 6. Frisch, H. P. "Integrated Analysis Capability

78 FR 45194 - General Electric Company; Analysis of Proposed Agreement Containing Consent Order To Aid Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... industries throughout the globe. GE's aviation segment, among other things, designs and manufactures jet... anticompetitive effects of the proposed transaction. The design and production of an aircraft engine, along with... information such as costs, sales statistics, inventories, formulas, patterns, devices, manufacturing processes...

A GUIDE FOR PLANNING PHYSICAL EDUCATION AND ATHLETIC FACILITIES.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton.

THIS STUDY EXAMINES PHYSICAL EDUCATION FACILITIES, THEIR PHYSICAL NEEDS, AND RELATED DESIGN CONSIDERATIONS. A SYSTEM OF DETERMINING THE TOTAL NUMBER OF TEACHING STATIONS NEEDED IS GIVEN TO AID INITIAL REQUIREMENT ANALYSIS. INDOOR FACILITIES ANALYZED INCLUDE--(1) THE GYMNASIUM, IN TERMS OF LOCATION, SIZE, DESIGN FEATURES, AND RELATED COMPONENTS,…

The future of school nursing: banishing band-AIDS to improve public health outcomes.

PubMed

Fleming, Robin

2012-08-01

This article provides analysis and commentary on the cultural roots that promote the provision of minor first aid in schools by school nurses. Using the Institute of Medicine's Future of Nursing report as a lens, this article illustrates how the focus on provision of first aid by school nurses dilutes larger public health contributions that school nurses could make if they were able to work to the full extent of their education, training and licensure. The article concludes with recommendations designed to support fuller use of nurses' scope of practice in schools.

Design specifications for NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction): Phase 2, Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twitty, A.F.; Handler, B.H.; Duncan, L.D.

Data Systems Engineering Organization (DSEO) personnel are developing a prototype computer aided instruction (CAI) system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project is to provide a prototype for implementing CAI as an enhancement to existing NALDA training. The CAI prototype project is being performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. In Phase II a structured design and specification document was completed that will provide the basis for development and implementationmore » of the desired CAI system. Phase III will consist of designing, developing, and testing a user interface which will extend the features of the Phase II prototype. The design of the CAI prototype has followed a rigorous structured analysis based on Yourdon/DeMarco methodology and Information Engineering tools. This document includes data flow diagrams, a data dictionary, process specifications, an entity-relationship diagram, a curriculum description, special function key definitions, and a set of standards developed for the NALDA CAI Prototype.« less

A community participation intervention to reduce HIV/AIDS stigma, Nakhon Ratchasima province, northeast Thailand.

PubMed

Apinundecha, C; Laohasiriwong, W; Cameron, M P; Lim, S

2007-10-01

This paper explores HIV/AIDS stigma in the socio-cultural context of Nakhon Ratchasima Province in the northeastern region of Thailand. Action research was used to develop a community participation intervention. The intervention was implemented in one village over a period of eight months. We describe the intervention and then test its effect on HIV/AIDS knowledge and HIV/AIDS stigma using a non-equivalent pre-test-post-test control group design. Analysis of co-variance confirms that, controlling for initial levels of HIV/AIDS knowledge and stigma, the intervention had a significant effect on HIV/AIDS knowledge score (p<0.01) and HIV/AIDS stigma score (p<0.01). Participatory observations by the researchers on villagers' perceptions and behaviour were consistent with the quantitative results. These results suggest that community interventions which empower the community, combined with a financial contribution to reduce resource constraints, are a useful and effective means of increasing interaction between people living with HIV/AIDS (PLWHA) and other community members, increasing tolerance and reducing HIV/AIDS stigma.

Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

Computational Geometry and Computer-Aided Design

NASA Technical Reports Server (NTRS)

Fay, T. H. (Compiler); Shoosmith, J. N. (Compiler)

1985-01-01

Extended abstracts of papers addressing the analysis, representation, and synthesis of shape information are presented. Curves and shape control, grid generation and contouring, solid modelling, surfaces, and curve intersection are specifically addressed.

NASA Structural Analysis System (NASTRAN)

NASA Technical Reports Server (NTRS)

Purves, L.

1991-01-01

Program aids in structural design of wide range of objects, from high-impact printer parts to turbine engine blades, and fully validated. Since source code included, NASTRAN modified or enhanced for new applications.

A Controlled Study of Funding for Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome as Resource Capacity Building in the Health System in Rwanda

PubMed Central

Shepard, Donald S.; Zeng, Wu; Amico, Peter; Rwiyereka, Angelique K.; Avila-Figueroa, Carlos

2012-01-01

Because human inmmunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) receives more donor funding globally than that for all other diseases combined, some critics allege this support undermines general health care. This empirical study evaluates the impact of HIV/AIDS funding on the primary health care system in Rwanda. Using a quasi-experimental design, we randomly selected 25 rural health centers (HCs) that started comprehensive HIV/AIDS services from 2002 through 2006 as the intervention group. Matched HCs with no HIV/AIDS services formed the control group. The analysis compared growth in inputs and services between intervention and control HCs with a difference-in-difference analysis in a random-effects model. Intervention HCs performed better than control HCs in most services (seven of nine), although only one of these improvements (Bacille Calmette-Guérin vaccination) reached or approached statistical significance. In conclusion, this six-year controlled study found no adverse effects of the expansion of HIV/AIDS services on non-HIV services among rural health centers in Rwanda. PMID:22556094

A controlled study of funding for human immunodeficiency virus/acquired immunodeficiency syndrome as resource capacity building in the health system in Rwanda.

PubMed

Shepard, Donald S; Zeng, Wu; Amico, Peter; Rwiyereka, Angelique K; Avila-Figueroa, Carlos

2012-05-01

Because human inmmunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) receives more donor funding globally than that for all other diseases combined, some critics allege this support undermines general health care. This empirical study evaluates the impact of HIV/AIDS funding on the primary health care system in Rwanda. Using a quasi-experimental design, we randomly selected 25 rural health centers (HCs) that started comprehensive HIV/AIDS services from 2002 through 2006 as the intervention group. Matched HCs with no HIV/AIDS services formed the control group. The analysis compared growth in inputs and services between intervention and control HCs with a difference-in-difference analysis in a random-effects model. Intervention HCs performed better than control HCs in most services (seven of nine), although only one of these improvements (Bacille Calmette-Guérin vaccination) reached or approached statistical significance. In conclusion, this six-year controlled study found no adverse effects of the expansion of HIV/AIDS services on non-HIV services among rural health centers in Rwanda.

Control of corruption, democratic accountability, and effectiveness of HIV/AIDS official development assistance

PubMed Central

Lee, Hwa-Young; Yang, Bong-Ming; Kang, Minah

2016-01-01

Background Despite continued global efforts, HIV/AIDS outcomes in developing countries have not made much progress. Poor governance in recipient countries is often seen as one of the reasons for ineffectiveness of aid efforts to achieve stated objectives and desired outcomes. Objective This study examines the impact of two important dimensions of governance – control of corruption and democratic accountability – on the effectiveness of HIV/AIDS official development assistance. Design An empirical analysis using dynamic panel Generalized Method of Moments estimation was conducted on 2001–2010 datasets. Results Control of corruption and democratic accountability revealed an independent effect and interaction with the amount of HIV/AIDS aid on incidence of HIV/AIDS, respectively, while none of the two governance variables had a significant effect on HIV/AIDS prevalence. Specifically, in countries with accountability level below −2.269, aid has a detrimental effect on incidence of HIV/AIDS. Conclusion The study findings suggest that aid programs need to be preceded or at least accompanied by serious efforts to improve governance in recipient countries and that democratic accountability ought to receive more critical attention. PMID:27189199

Religion and women's health in Ghana: insights into HIV/AIDs preventive and protective behavior.

PubMed

Takyi, Baffour K

2003-03-01

Since the late 1970s when the first cases of HIV/AIDS were identified in Africa, there has been an upsurge of research on the epidemic. Although religious involvement may be germane to AIDS protective and risk behavior, few of these studies deal with religion and AIDS. This article contributes to the discourse on religion and health in Africa by analysing the interrelationship between religion and AIDS behavior in Ghana, a West African country at the early stages of the AIDS epidemic, and one where religious activities are more pronounced. We explore whether a woman's knowledge of HIV/AIDS is associated with her religious affiliation, and whether religious affiliation influences AIDS preventive (protective) attitudes. Findings from our analysis of Ghanaian data indicate that religious affiliation has a significant effect on knowledge of AIDS. However, we did not find religious affiliation to be associated with changes in specific protective behavior, particularly the use of condoms. The limitations and implications of the study are discussed, promising directions for further research on religion and AIDS protective and risk behaviors are also discussed, and the design and development of culturally sensitive programs to help in the ongoing AIDS prevention efforts in the region are proposed.

Creating an advance-care-planning decision aid for high-risk surgery: a qualitative study

PubMed Central

2014-01-01

Background High-risk surgery patients may lose decision-making capacity as a result of surgical complications. Advance care planning prior to surgery may be beneficial, but remains controversial and is hindered by a lack of appropriate decision aids. This study sought to examine stakeholders’ views on the appropriateness of using decision aids, in general, to support advance care planning among high-risk surgery populations and the design of such a decision aid. Methods Key informants were recruited through purposive and snowball sampling. Semi-structured interviews were conducted by phone until data collected reached theoretical saturation. Key informants were asked to discuss their thoughts about advance care planning and interventions to support advance care planning, particularly for this population. Researchers took de-identified notes that were analyzed for emerging concordant, discordant, and recurrent themes using interpretative phenomenological analysis. Results Key informants described the importance of initiating advance care planning preoperatively, despite potential challenges present in surgical settings. In general, decision aids were viewed as an appropriate approach to support advance care planning for this population. A recipe emerged from the data that outlines tools, ingredients, and tips for success that are needed to design an advance care planning decision aid for high-risk surgical settings. Conclusions Stakeholders supported incorporating advance care planning in high-risk surgical settings and endorsed the appropriateness of using decision aids to do so. Findings will inform the next stages of developing the first advance care planning decision aid for high-risk surgery patients. PMID:25067908

Creating an advance-care-planning decision aid for high-risk surgery: a qualitative study.

PubMed

Schuster, Anne Lr; Aslakson, Rebecca A; Bridges, John Fp

2014-01-01

High-risk surgery patients may lose decision-making capacity as a result of surgical complications. Advance care planning prior to surgery may be beneficial, but remains controversial and is hindered by a lack of appropriate decision aids. This study sought to examine stakeholders' views on the appropriateness of using decision aids, in general, to support advance care planning among high-risk surgery populations and the design of such a decision aid. Key informants were recruited through purposive and snowball sampling. Semi-structured interviews were conducted by phone until data collected reached theoretical saturation. Key informants were asked to discuss their thoughts about advance care planning and interventions to support advance care planning, particularly for this population. Researchers took de-identified notes that were analyzed for emerging concordant, discordant, and recurrent themes using interpretative phenomenological analysis. Key informants described the importance of initiating advance care planning preoperatively, despite potential challenges present in surgical settings. In general, decision aids were viewed as an appropriate approach to support advance care planning for this population. A recipe emerged from the data that outlines tools, ingredients, and tips for success that are needed to design an advance care planning decision aid for high-risk surgical settings. Stakeholders supported incorporating advance care planning in high-risk surgical settings and endorsed the appropriateness of using decision aids to do so. Findings will inform the next stages of developing the first advance care planning decision aid for high-risk surgery patients.

An information system design for watershed-wide modeling of water loss to the atmosphere using remote sensing techniques

NASA Technical Reports Server (NTRS)

Khorram, S.

1977-01-01

Results are presented of a study intended to develop a general location-specific remote-sensing procedure for watershed-wide estimation of water loss to the atmosphere by evaporation and transpiration. The general approach involves a stepwise sequence of required information definition (input data), appropriate sample design, mathematical modeling, and evaluation of results. More specifically, the remote sensing-aided system developed to evaluate evapotranspiration employs a basic two-stage two-phase sample of three information resolution levels. Based on the discussed design, documentation, and feasibility analysis to yield timely, relatively accurate, and cost-effective evapotranspiration estimates on a watershed or subwatershed basis, work is now proceeding to implement this remote sensing-aided system.

Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

NASA Technical Reports Server (NTRS)

Wuerer, J. E.; Gran, M.; Held, T. W.

1994-01-01

The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

[A survey on AIDS discrimination among medical college students].

PubMed

Liu, Jia-hong; Jiang, Hong-ying; Chen, Hong; Liao, Qing-hua; Fu, Jun; Lu, Fei-bao; Liu, Wei-xin; Li, Yue

2009-11-01

To understand the related knowledge, discrimination attitudes toward HIV/AIDS among medical college students, and to provide scientific evidence for further HIV/AIDS anti-discrimination intervention. By means of stratified cluster sampling to classes, 2844 undergraduate students were randomly selected from medical colleges. A self-designed and self-administered questionnaire survey was conducted, and SPSS 13.0 software was used for data analysis. 2501 valid questionnaires had been collected. The overall HIV/AIDS knowledge coverage rate of the respondents was 73.1% (1828/2501); The HIV/AIDS discrimination rates in different questions were varying, the discrimination rate of infected with AIDS by bad sex and sharing needles was 83.1% (2078/2501) and 77.7% (1943/2501) respectively, the discrimination rates in term of contacting with HIV patients and their daily necessities, sharing desks, personal social were all exceeding 40%. The medical students held serious discrimination attitudes to HIV infected persons and patients; it is necessary to strengthen anti-discrimination education about HIV/AIDS among medical students.

Perceptions of the availability and effectiveness of HIV/AIDS awareness and intervention programmes by people with disabilities in Uganda.

PubMed

Chireshe, Regis; Rutondoki, Edward Ntare; Ojwang, Paul

2010-12-01

The study investigated perceptions of the availability and effectiveness of HIV/AIDS awareness and intervention programmes by people with disabilities in Uganda. Participants (N=95) were made up of 15 leaders of disabled people's organisations (DPOs) and 80 people with disabilities (PWDs). A survey design which used both quantitative and qualitative research methods was adopted. A questionnaire was used for leaders of DPOs while focus group discussions (FGDs) were held with the rest of the participants. Descriptive statistics were used to analyse the quantitative data. The qualitative data were analysed by means of a content analysis. The study found that although PWDs were aware of the HIV/AIDS pandemic, they felt discriminated against on HIV/AIDS issues. The PWDs had difficulties in accessing HIV/AIDS services because of mainly communication problems. Results further revealed that the HIV/AIDS policy on disability was not very clear. The PWDs requested for full involvement in HIV/AIDS advocacy and training programmes. Recommendations were made.

Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

NASA Technical Reports Server (NTRS)

Farrell, C. E.; Krauze, L. D.

1983-01-01

The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

Silicon Wafer Advanced Packaging (SWAP). Multichip Module (MCM) Foundry Study. Version 2

DTIC Science & Technology

1991-04-08

Next Layer Dielectric Spacing - Additional Metal Thickness Impact on Dielectric Uniformity/Adhiesion. The first step in .!Ie EPerimental design would be... design CAM - computer aided manufacturing CAE - computer aided engineering CALCE - computer aided life cycle engineering center CARMA - computer aided...expansion 5 j- CVD - chemical vapor deposition J . ..- j DA - design automation J , DEC - Digital Equipment Corporation --- DFT - design for testability

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

Task Analysis Inventories. Series II.

ERIC Educational Resources Information Center

Wesson, Carl E.

This second in a series of task analysis inventories contains checklists of work performed in twenty-two occupations. Each inventory is a comprehensive list of work activities, responsibilities, educational courses, machines, tools, equipment, and work aids used and the products produced or services rendered in a designated occupational area. The…

Shaded-Color Picture Generation of Computer-Defined Arbitrary Shapes

NASA Technical Reports Server (NTRS)

Cozzolongo, J. V.; Hermstad, D. L.; Mccoy, D. S.; Clark, J.

1986-01-01

SHADE computer program generates realistic color-shaded pictures from computer-defined arbitrary shapes. Objects defined for computer representation displayed as smooth, color-shaded surfaces, including varying degrees of transparency. Results also used for presentation of computational results. By performing color mapping, SHADE colors model surface to display analysis results as pressures, stresses, and temperatures. NASA has used SHADE extensively in sign and analysis of high-performance aircraft. Industry should find applications for SHADE in computer-aided design and computer-aided manufacturing. SHADE written in VAX FORTRAN and MACRO Assembler for either interactive or batch execution.

Neural networks for structural design - An integrated system implementation

NASA Technical Reports Server (NTRS)

Berke, Laszlo; Hafez, Wassim; Pao, Yoh-Han

1992-01-01

The development of powerful automated procedures to aid the creative designer is becoming increasingly critical for complex design tasks. In the work described here Artificial Neural Nets are applied to acquire structural analysis and optimization domain expertise. Based on initial instructions from the user an automated procedure generates random instances of structural analysis and/or optimization 'experiences' that cover a desired domain. It extracts training patterns from the created instances, constructs and trains an appropriate network architecture and checks the accuracy of net predictions. The final product is a trained neural net that can estimate analysis and/or optimization results instantaneously.

Evaluation of direct and indirect additive manufacture of maxillofacial prostheses.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter; Ji, Lu

2012-09-01

The efficacy of computer-aided technologies in the design and manufacture of maxillofacial prostheses has not been fully proven. This paper presents research into the evaluation of direct and indirect additive manufacture of a maxillofacial prosthesis against conventional laboratory-based techniques. An implant/magnet-retained nasal prosthesis case from a UK maxillofacial unit was selected as a case study. A benchmark prosthesis was fabricated using conventional laboratory-based techniques for comparison against additive manufactured prostheses. For the computer-aided workflow, photogrammetry, computer-aided design and additive manufacture (AM) methods were evaluated in direct prosthesis body fabrication and indirect production using an additively manufactured mould. Qualitative analysis of position, shape, colour and edge quality was undertaken. Mechanical testing to ISO standards was also used to compare the silicone rubber used in the conventional prosthesis with the AM material. Critical evaluation has shown that utilising a computer-aided work-flow can produce a prosthesis body that is comparable to that produced using existing best practice. Technical limitations currently prevent the direct fabrication method demonstrated in this paper from being clinically viable. This research helps prosthesis providers understand the application of a computer-aided approach and guides technology developers and researchers to address the limitations identified.

33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions, and...

33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions, and...

33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions, and...

Computer-aided rational design of the phosphotransferase system for enhanced glucose uptake in Escherichia coli

PubMed Central

Nishio, Yousuke; Usuda, Yoshihiro; Matsui, Kazuhiko; Kurata, Hiroyuki

2008-01-01

The phosphotransferase system (PTS) is the sugar transportation machinery that is widely distributed in prokaryotes and is critical for enhanced production of useful metabolites. To increase the glucose uptake rate, we propose a rational strategy for designing the molecular architecture of the Escherichia coli glucose PTS by using a computer-aided design (CAD) system and verified the simulated results with biological experiments. CAD supports construction of a biochemical map, mathematical modeling, simulation, and system analysis. Assuming that the PTS aims at controlling the glucose uptake rate, the PTS was decomposed into hierarchical modules, functional and flux modules, and the effect of changes in gene expression on the glucose uptake rate was simulated to make a rational strategy of how the gene regulatory network is engineered. Such design and analysis predicted that the mlc knockout mutant with ptsI gene overexpression would greatly increase the specific glucose uptake rate. By using biological experiments, we validated the prediction and the presented strategy, thereby enhancing the specific glucose uptake rate. PMID:18197177

Interactive computer graphics system for structural sizing and analysis of aircraft structures

NASA Technical Reports Server (NTRS)

Bendavid, D.; Pipano, A.; Raibstein, A.; Somekh, E.

1975-01-01

A computerized system for preliminary sizing and analysis of aircraft wing and fuselage structures was described. The system is based upon repeated application of analytical program modules, which are interactively interfaced and sequence-controlled during the iterative design process with the aid of design-oriented graphics software modules. The entire process is initiated and controlled via low-cost interactive graphics terminals driven by a remote computer in a time-sharing mode.

Impact of HIV/AIDS on Social Relationships in Rural China.

PubMed

Zhang, Yurong; Zhang, Xiulan; Hanko Aleong, Tamara; Fuller-Thomson, Esme

2011-01-01

Social support promotes greater medical compliance, better immune system functioning and slows the progress of HIV/AIDS. One in every 50 People Living With HIV/AIDS (PLWHA) is Chinese, yet little is known about the impact of HIV/AIDS on social relationships in China. This study compares the characteristics of those who report that HIV/AIDS had a substantial impact versus a modest impact on their social relationships. We obtained data from a survey of 866 PLWHA in rural China, which was conducted in 2006-2007 in the three Chinese provinces with the highest prevalence of HIV/AIDS. Chi-square test and multiple logistic regression were performed. The analysis shows that PLWHA who had full-blown AIDS (OR= 1.53; 95% CI=1.09-2.13) and those who were poor (OR=2.19; 95% CI=1.52-3.16) reported greater impact on their social relationships. The results lay a solid foundation for designing effective policy initiatives and intervention programs aimed at alleviating the impact of HIV/AIDS on social relationships and improving the quality of life of PLWHA.

Impact of HIV/AIDS on Social Relationships in Rural China

PubMed Central

Zhang, Yurong; Zhang, Xiulan; Hanko Aleong, Tamara; Fuller-Thomson, Esme

2011-01-01

Social support promotes greater medical compliance, better immune system functioning and slows the progress of HIV/AIDS. One in every 50 People Living With HIV/AIDS (PLWHA) is Chinese, yet little is known about the impact of HIV/AIDS on social relationships in China. This study compares the characteristics of those who report that HIV/AIDS had a substantial impact versus a modest impact on their social relationships. We obtained data from a survey of 866 PLWHA in rural China, which was conducted in 2006-2007 in the three Chinese provinces with the highest prevalence of HIV/AIDS. Chi-square test and multiple logistic regression were performed. The analysis shows that PLWHA who had full-blown AIDS (OR= 1.53; 95% CI=1.09-2.13) and those who were poor (OR=2.19; 95% CI=1.52-3.16) reported greater impact on their social relationships. The results lay a solid foundation for designing effective policy initiatives and intervention programs aimed at alleviating the impact of HIV/AIDS on social relationships and improving the quality of life of PLWHA. PMID:21792384

Project visual analysis for the Allegheny National Forest

Treesearch

Gary W. Kell

1979-01-01

The Project Visual Analysis is a landscape assessment procedure involving forest vegetative manipulation. A logical step by step analysis leads the user to a specific set of landscape management guidelines to be used as an aid in designing a project or in evaluating whether the proposed project impacts will meet visual objectives. Key elements within the procedure are...

Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

[Methodological problems in the scientific research on HIV /AIDS in Bolivia].

PubMed

Hita, Susana Ramírez

2013-05-01

This paper discusses the methodological problems in the scientific research on HIV/AIDS in Bolivia, both in the areas of epidemiology and social sciences. Studies associated with this research served as the basis for the implementation of health programs run by The Global Fund, The Pan-American Health Organization, International Cooperation, Non-Governmental Organizations and the Bolivian Ministry of Health and Sports. An analysis of the methodological contradictions and weaknesses was made by reviewing the bibliography of the studies and by conducting qualitative methodological research, that was focused on the quality of health care available to people living with HIV/AIDS in public hospitals and health centers, and looked at how programs targeted at this sector of the population are designed and delivered. In this manner, it was possible to observe the shortcomings of the methodological design in the epidemiological and social science studies which serve as the basis for the implementation of these health programs.

Time-Frequency Masking for Speech Separation and Its Potential for Hearing Aid Design

PubMed Central

Wang, DeLiang

2008-01-01

A new approach to the separation of speech from speech-in-noise mixtures is the use of time-frequency (T-F) masking. Originated in the field of computational auditory scene analysis, T-F masking performs separation in the time-frequency domain. This article introduces the T-F masking concept and reviews T-F masking algorithms that separate target speech from either monaural or binaural mixtures, as well as microphone-array recordings. The review emphasizes techniques that are promising for hearing aid design. This article also surveys recent studies that evaluate the perceptual effects of T-F masking techniques, particularly their effectiveness in improving human speech recognition in noise. An assessment is made of the potential benefits of T-F masking methods for the hearing impaired in light of the processing constraints of hearing aids. Finally, several issues pertinent to T-F masking are discussed. PMID:18974204

Design and analysis of all-dielectric broadband nonpolarizing parallel-plate beam splitters.

PubMed

Wang, Wenliang; Xiong, Shengming; Zhang, Yundong

2007-06-01

Past research on the all-dielectric nonpolarizing beam splitter is reviewed. With the aid of the needle thin-film synthesis method and the conjugate graduate refine method, three different split ratio nonpolarizing parallel-plate beam splitters over a 200 nm spectral range centered at 550 nm with incidence angles of 45 degrees are designed. The chosen materials component and the initial stack are based on the Costich and Thelen theories. The results of design and analysis show that the designs maintain a very low polarization ratio in the working range of the spectrum and has a reasonable angular field.

A novel GLM-based method for the Automatic IDentification of functional Events (AIDE) in fNIRS data recorded in naturalistic environments.

PubMed

Pinti, Paola; Merla, Arcangelo; Aichelburg, Clarisse; Lind, Frida; Power, Sarah; Swingler, Elizabeth; Hamilton, Antonia; Gilbert, Sam; Burgess, Paul W; Tachtsidis, Ilias

2017-07-15

Recent technological advances have allowed the development of portable functional Near-Infrared Spectroscopy (fNIRS) devices that can be used to perform neuroimaging in the real-world. However, as real-world experiments are designed to mimic everyday life situations, the identification of event onsets can be extremely challenging and time-consuming. Here, we present a novel analysis method based on the general linear model (GLM) least square fit analysis for the Automatic IDentification of functional Events (or AIDE) directly from real-world fNIRS neuroimaging data. In order to investigate the accuracy and feasibility of this method, as a proof-of-principle we applied the algorithm to (i) synthetic fNIRS data simulating both block-, event-related and mixed-design experiments and (ii) experimental fNIRS data recorded during a conventional lab-based task (involving maths). AIDE was able to recover functional events from simulated fNIRS data with an accuracy of 89%, 97% and 91% for the simulated block-, event-related and mixed-design experiments respectively. For the lab-based experiment, AIDE recovered more than the 66.7% of the functional events from the fNIRS experimental measured data. To illustrate the strength of this method, we then applied AIDE to fNIRS data recorded by a wearable system on one participant during a complex real-world prospective memory experiment conducted outside the lab. As part of the experiment, there were four and six events (actions where participants had to interact with a target) for the two different conditions respectively (condition 1: social-interact with a person; condition 2: non-social-interact with an object). AIDE managed to recover 3/4 events and 3/6 events for conditions 1 and 2 respectively. The identified functional events were then corresponded to behavioural data from the video recordings of the movements and actions of the participant. Our results suggest that "brain-first" rather than "behaviour-first" analysis is possible and that the present method can provide a novel solution to analyse real-world fNIRS data, filling the gap between real-life testing and functional neuroimaging. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Index of Selected Publications Through December 1983,

DTIC Science & Technology

1984-03-01

substantiating methodology , and is designed mainly for * readers with a professional interest in the subject but do * not have a primary responsibility in that...Navy in postwar American security policy -- computer subroutines - CRC 20 H 1052 experimental design techniques, computer North Atlantic-Norwegian...statistical tion and Congestion, With an Example from Southern experimental design technique aids the analysis California, 27 pp., Jan 1971, AD 719 906 of

NASA Tech Briefs, October 1994. Volume 18, No. 10

NASA Technical Reports Server (NTRS)

1994-01-01

Topics: Data Acquisition and Analysis; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports

Rapid Geometry Creation for Computer-Aided Engineering Parametric Analyses: A Case Study Using ComGeom2 for Launch Abort System Design

NASA Technical Reports Server (NTRS)

Hawke, Veronica; Gage, Peter; Manning, Ted

2007-01-01

ComGeom2, a tool developed to generate Common Geometry representation for multidisciplinary analysis, has been used to create a large set of geometries for use in a design study requiring analysis by two computational codes. This paper describes the process used to generate the large number of configurations and suggests ways to further automate the process and make it more efficient for future studies. The design geometry for this study is the launch abort system of the NASA Crew Launch Vehicle.

Automated Parameter Studies Using a Cartesian Method

NASA Technical Reports Server (NTRS)

Murman, Scott M.; Aftosimis, Michael J.; Nemec, Marian

2004-01-01

Computational Fluid Dynamics (CFD) is now routinely used to analyze isolated points in a design space by performing steady-state computations at fixed flight conditions (Mach number, angle of attack, sideslip), for a fixed geometric configuration of interest. This "point analysis" provides detailed information about the flowfield, which aides an engineer in understanding, or correcting, a design. A point analysis is typically performed using high fidelity methods at a handful of critical design points, e.g. a cruise or landing configuration, or a sample of points along a flight trajectory.

Environmental Testing and Thermal Analysis of the NPS Solar Cell Array Tester (NPS-SCAT) CubeSat

DTIC Science & Technology

2011-06-01

BCR Battery Charge Regulator C&DH Command and Data Handling CAD Computer Aided Design CDR Critical Design Review CFT Comprehensive Functional Test ...CPT Comprehensive Performance Test CoM Center of Mass COTS Commercial Off-the-Shelf CTB Cargo Transfer Bag EDU Engineering Design Unit EPS...and inexpensive solution. 2 C. ENVIRONMENTAL TESTING Environmental testing is an important element of the design and testing of a satellite. By

Machine-aided indexing at NASA

NASA Technical Reports Server (NTRS)

Silvester, June P.; Genuardi, Michael T.; Klingbiel, Paul H.

1994-01-01

This report describes the NASA Lexical Dictionary (NLD), a machine-aided indexing system used online at the National Aeronautics and Space Administration's Center for AeroSpace Information (CASI). This system automatically suggests a set of candidate terms from NASA's controlled vocabulary for any designated natural language text input. The system is comprised of a text processor that is based on the computational, nonsyntactic analysis of input text and an extensive knowledge base that serves to recognize and translate text-extracted concepts. The functions of the various NLD system components are described in detail, and production and quality benefits resulting from the implementation of machine-aided indexing at CASI are discussed.

Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology

NASA Technical Reports Server (NTRS)

Biess, J. J.; Yu, Y.; Middlebrook, R. D.; Schoenfeld, A. D.

1974-01-01

A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks.

Identifying design considerations for a shared decision aid for use at the point of outpatient clinical care: An ethnographic study at an inner city clinic.

PubMed

Hajizadeh, Negin; Perez Figueroa, Rafael E; Uhler, Lauren M; Chiou, Erin; Perchonok, Jennifer E; Montague, Enid

2013-03-06

Computerized decision aids could facilitate shared decision-making at the point of outpatient clinical care. The objective of this study was to investigate whether a computerized shared decision aid would be feasible to implement in an inner-city clinic by evaluating the current practices in shared decision-making, clinicians' use of computers, patient and clinicians' attitudes and beliefs toward computerized decision aids, and the influence of time on shared decision-making. Qualitative data analysis of observations and semi-structured interviews with patients and clinicians at an inner-city outpatient clinic. The findings provided an exploratory look at the prevalence of shared decision-making and attitudes about health information technology and decision aids. A prominent barrier to clinicians engaging in shared decision-making was a lack of perceived patient understanding of medical information. Some patients preferred their clinicians make recommendations for them rather than engage in formal shared decision-making. Health information technology was an integral part of the clinic visit and welcomed by most clinicians and patients. Some patients expressed the desire to engage with health information technology such as viewing their medical information on the computer screen with their clinicians. All participants were receptive to the idea of a decision aid integrated within the clinic visit although some clinicians were concerned about the accuracy of prognostic estimates for complex medical problems. We identified several important considerations for the design and implementation of a computerized decision aid including opportunities to: bridge clinician-patient communication about medical information while taking into account individual patients' decision-making preferences, complement expert clinician judgment with prognostic estimates, take advantage of patient waiting times, and make tasks involved during the clinic visit more efficient. These findings should be incorporated into the design and implementation of a computerized shared decision aid at an inner-city hospital.

FRANOPP: Framework for analysis and optimization problems user's guide

NASA Technical Reports Server (NTRS)

Riley, K. M.

1981-01-01

Framework for analysis and optimization problems (FRANOPP) is a software aid for the study and solution of design (optimization) problems which provides the driving program and plotting capability for a user generated programming system. In addition to FRANOPP, the programming system also contains the optimization code CONMIN, and two user supplied codes, one for analysis and one for output. With FRANOPP the user is provided with five options for studying a design problem. Three of the options utilize the plot capability and present an indepth study of the design problem. The study can be focused on a history of the optimization process or on the interaction of variables within the design problem.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U. S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides all the information necessary tomore » access the DSPA programs, to input required data and to generate appropriate Design Synthesis or Performance Analysis Output.« less

Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

NASA Technical Reports Server (NTRS)

Genuardi, Michael T.

1993-01-01

One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

Computer aided analysis, simulation and optimisation of thermal sterilisation processes.

PubMed

Narayanan, C M; Banerjee, Arindam

2013-04-01

Although thermal sterilisation is a widely employed industrial process, little work is reported in the available literature including patents on the mathematical analysis and simulation of these processes. In the present work, software packages have been developed for computer aided optimum design of thermal sterilisation processes. Systems involving steam sparging, jacketed heating/cooling, helical coils submerged in agitated vessels and systems that employ external heat exchangers (double pipe, shell and tube and plate exchangers) have been considered. Both batch and continuous operations have been analysed and simulated. The dependence of del factor on system / operating parameters such as mass or volume of substrate to be sterilised per batch, speed of agitation, helix diameter, substrate to steam ratio, rate of substrate circulation through heat exchanger and that through holding tube have been analysed separately for each mode of sterilisation. Axial dispersion in the holding tube has also been adequately accounted for through an appropriately defined axial dispersion coefficient. The effect of exchanger characteristics/specifications on the system performance has also been analysed. The multiparameter computer aided design (CAD) software packages prepared are thus highly versatile in nature and they permit to make the most optimum choice of operating variables for the processes selected. The computed results have been compared with extensive data collected from a number of industries (distilleries, food processing and pharmaceutical industries) and pilot plants and satisfactory agreement has been observed between the two, thereby ascertaining the accuracy of the CAD softwares developed. No simplifying assumptions have been made during the analysis and the design of associated heating / cooling equipment has been performed utilising the most updated design correlations and computer softwares.

Computer-Aided Design of Low-Noise Microwave Circuits

NASA Astrophysics Data System (ADS)

Wedge, Scott William

1991-02-01

Devoid of most natural and manmade noise, microwave frequencies have detection sensitivities limited by internally generated receiver noise. Low-noise amplifiers are therefore critical components in radio astronomical antennas, communications links, radar systems, and even home satellite dishes. A general technique to accurately predict the noise performance of microwave circuits has been lacking. Current noise analysis methods have been limited to specific circuit topologies or neglect correlation, a strong effect in microwave devices. Presented here are generalized methods, developed for computer-aided design implementation, for the analysis of linear noisy microwave circuits comprised of arbitrarily interconnected components. Included are descriptions of efficient algorithms for the simultaneous analysis of noisy and deterministic circuit parameters based on a wave variable approach. The methods are therefore particularly suited to microwave and millimeter-wave circuits. Noise contributions from lossy passive components and active components with electronic noise are considered. Also presented is a new technique for the measurement of device noise characteristics that offers several advantages over current measurement methods.

A cultural approach to conducting HIV/AIDS and hepatitis C virus education among native American adolescents.

PubMed

Lowe, John

2008-08-01

This pilot study tests the feasibility of using a Talking Circle approach and measures cultural values and beliefs within a HIV/AIDS and hepatitis C virus (HCV) prevention program conducted among a Native American (Cherokee) youth population. A descriptive correlation design was used to examine the relationship between Cherokee self-reliance and HIV/AIDS and HCV knowledge, attitudes, and behaviors. The study used three questionnaires that were administered before and after the prevention program to collect data from a convenience sample of 41 students at a public high school within the boundaries of the Cherokee Nation in Oklahoma. Statistical analysis revealed immediate differences between pretests and posttests related to knowledge, attitudes, and behavioral intentions concerning HIV/AIDS and HCV and the cultural dynamic of Cherokee self-reliance.

Analysis of Shuttle Orbiter Reliability and Maintainability Data for Conceptual Studies

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, N. H.; Ebeling, C. E.

1996-01-01

In order to provide a basis for estimating the expected support required of new systems during their conceptual design phase, Langley Research Center has recently collected Shuttle Orbiter reliability and maintainability data from the various data base sources at Kennedy Space Center. This information was analyzed to provide benchmarks, trends, and distributions to aid in the analysis of new designs. This paper presents a summation of those results and an initial interpretation of the findings.

Watchful waiting or induction of labour--a matter of informed choice: identification, analysis and critical appraisal of decision aids and patient information regarding care options for women with uncomplicated singleton late and post term pregnancies: a review.

PubMed

Berger, Bettina; Schwarz, Christiane; Heusser, Peter

2015-05-07

Decision-making during pregnancy regarding different options of care can be difficult, particularly when risks of intervention versus no intervention for mother and baby are unclear. Unbiased information and support for decision making may be beneficial in these situations. The management of normal pregnancies at and beyond term is an example of such a situation. In order to determine the need to develop an evidence-based decision aid this paper searches, analyses and appraises patient decision aids and patient information leaflets regarding care options in cases of late term and post-term pregnancies, including complementary and alternative medicine (CAM). A literature search was carried out in a variety of lay and medical databases. written information related to uncomplicated singleton pregnancies and targeted at lay people. Analysis and appraisal of included material by means of quality criteria was set up based on the International Patient Decision Aid Standards accounting for evidence-basing of CAM options. Inclusion of two decision aids and eleven leaflets from four decision aids and sixteen leaflets. One decision aid met the quality criteria almost completely, the other one only insufficiently despite providing some helpful information. Only one leaflet is of good quality, but cannot substitute a decision aid. There is an urgent need for the design of an evidence-based decision aid of good quality for late-term or post-term pregnancy, particularly in German language.

Implementation of a Three-Semester Concurrent Engineering Design Sequence for Lower-Division Engineering Students

ERIC Educational Resources Information Center

Bertozzi, N.; Hebert, C.; Rought, J.; Staniunas, C.

2007-01-01

Over the past decade the software products available for solid modeling, dynamic, stress, thermal, and flow analysis, and computer-aiding manufacturing (CAM) have become more powerful, affordable, and easier to use. At the same time it has become increasingly important for students to gain concurrent engineering design and systems integration…

Social Representations of Cybersecurity by University Students and Implications for Instructional Design

ERIC Educational Resources Information Center

Pawlowski, Suzanne D.; Jung, Yoonhyuk

2015-01-01

Cybersecurity has become an essential topic in introductory information systems (IS) core courses. As an aid to course design, the exploratory research in this paper uses a social representations lens to elucidate the perceptions of cybersecurity and cybersecurity threats held by students. Analysis of qualitative survey data from 152 students at a…

Development of a prototype commonality analysis tool for use in space programs

NASA Technical Reports Server (NTRS)

Yeager, Dorian P.

1988-01-01

A software tool to aid in performing commonality analyses, called Commonality Analysis Problem Solver (CAPS), was designed, and a prototype version (CAPS 1.0) was implemented and tested. The CAPS 1.0 runs in an MS-DOS or IBM PC-DOS environment. The CAPS is designed around a simple input language which provides a natural syntax for the description of feasibility constraints. It provides its users with the ability to load a database representing a set of design items, describe the feasibility constraints on items in that database, and do a comprehensive cost analysis to find the most economical substitution pattern.

Aids to School Bus Design

NASA Technical Reports Server (NTRS)

1991-01-01

Navistar International Transportation Corporation, Chicago, IL, used three separate NASA-developed technologies in the design and testing of their 3000 Series Bus Chassis which was developed expressly for school bus applications. For structural analysis, they used the MSC/NASTRAN program which mathematically analyzes a design and predicts how it will hold up under stress. They also used the SPATE 9000 system for non-contact measurement of stress, load transfer mechanisms, detection of hidden flaws, and monitoring structural changes during fatigue testing. SPATE 9000 was based on infrared stress measurement technology developed by Langley Research Center. They also employed the Wyle Ride Quality Meter, which was developed by Langley to aid in passenger aircraft design by providing an accurate measurement of ride vibration and sound level. These numbers translate into a subjective discomfort level index. These technologies contribute to the company's 45-48 percent share of the school bus chassis market.

Social support and support groups among people with HIV/AIDS in Ghana.

PubMed

Abrefa-Gyan, Tina; Wu, Liyun; Lewis, Marilyn W

2016-01-01

HIV/AIDS, a chronic burden in Ghana, poses social and health outcome concerns to those infected. Examining the Medical Outcome Study Social Support Survey (MOS-SSS) instrument among 300 Ghanaians from a cross-sectional design, Principal Component Analysis yielded four factors (positive interaction, trust building, information giving, and essential support), which accounted for 85.73% of the total variance in the MOS-SSS. A logistic regression analysis showed that essential support was the strongest predictor of the length of time an individual stayed in the support group, whereas positive interaction indicated negative association. The study's implications for policy, research, and practice were discussed.

The Experimental Design Assistant.

PubMed

Percie du Sert, Nathalie; Bamsey, Ian; Bate, Simon T; Berdoy, Manuel; Clark, Robin A; Cuthill, Innes; Fry, Derek; Karp, Natasha A; Macleod, Malcolm; Moon, Lawrence; Stanford, S Clare; Lings, Brian

2017-09-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility.

The Experimental Design Assistant

PubMed Central

Bamsey, Ian; Bate, Simon T.; Berdoy, Manuel; Clark, Robin A.; Cuthill, Innes; Fry, Derek; Karp, Natasha A.; Macleod, Malcolm; Moon, Lawrence; Stanford, S. Clare; Lings, Brian

2017-01-01

Addressing the common problems that researchers encounter when designing and analysing animal experiments will improve the reliability of in vivo research. In this article, the Experimental Design Assistant (EDA) is introduced. The EDA is a web-based tool that guides the in vivo researcher through the experimental design and analysis process, providing automated feedback on the proposed design and generating a graphical summary that aids communication with colleagues, funders, regulatory authorities, and the wider scientific community. It will have an important role in addressing causes of irreproducibility. PMID:28957312

Resource Analysis of Cognitive Process Flow Used to Achieve Autonomy

DTIC Science & Technology

2016-03-01

to be used as a decision - making aid to guide system designers and program managers not necessarily familiar with cognitive pro- cessing, or resource...implementing end-to-end cognitive processing flows multiplies and the impact of these design decisions on efficiency and effectiveness increases [1]. The...end-to-end cognitive systems and alternative computing technologies, then system design and acquisition personnel could make systematic analyses and

Program Aids Analysis And Optimization Of Design

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Lamarsh, William J., II

1994-01-01

NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

The environment power system analysis tool development program

NASA Technical Reports Server (NTRS)

Jongeward, Gary A.; Kuharski, Robert A.; Kennedy, Eric M.; Stevens, N. John; Putnam, Rand M.; Roche, James C.; Wilcox, Katherine G.

1990-01-01

The Environment Power System Analysis Tool (EPSAT) is being developed to provide space power system design engineers with an analysis tool for determining system performance of power systems in both naturally occurring and self-induced environments. The program is producing an easy to use computer aided engineering (CAE) tool general enough to provide a vehicle for technology transfer from space scientists and engineers to power system design engineers. The results of the project after two years of a three year development program are given. The EPSAT approach separates the CAE tool into three distinct functional units: a modern user interface to present information, a data dictionary interpreter to coordinate analysis; and a data base for storing system designs and results of analysis.

Testing the effects of a decision aid for prostate cancer screening.

PubMed

Rubel, Stephanie K; Miller, Jacqueline W; Stephens, Robert L; Xu, Ye; Scholl, Lawrence E; Holden, E Wayne; Stroud, Leonardo A; Volk, Robert J

2010-04-01

There is an ever-growing trend toward more patient involvement in making health care decisions. This trend has been accompanied by the development of "informed decision-making" interventions to help patients become more engaged and comfortable with making these decisions. We describe the effects of a prostate cancer screening decision aid on knowledge, beliefs about screening, risk perception, control preferences, decisional conflict, and decisional anxiety. Data were collected from 200 males aged 50-70 years in the general population who randomly were assigned to exposure to the decision aid or no exposure as a control condition. A Solomon four-group design was used to test for possible pretest sensitization effects and to assess the effects of exposure to the decision aid. No significant pretest sensitization effects were found. Analysis of the exposure effects found that knowledge increased significantly for those exposed to the decision aid compared with those unexposed. Exposure to the decision aid also had some influence on decreasing both decisional conflict and decisional anxiety. Decision aids can play an important role in increasing patients' knowledge and decreasing anxiety when asked to make health care decisions.

Application of EVA guidelines and design criteria. Volume 2: EVA workstation conceptual designs

NASA Technical Reports Server (NTRS)

Brown, N. E.

1973-01-01

Several EV workstation concepts were developed and are documented. The workstation concepts were developed following a comprehensive analysis of potential EV missions, functions, and tasks as interpreted from NASA and contractor space shuttle and space station studies, mission models, and related reports. The design of a versatile, portable EVA workstation is aimed at reducing the design and development costs for each mission and aiding in the development of on-orbit serviceable payloads.

National Combustion Code, a Multidisciplinary Combustor Design System, Will Be Transferred to the Commercial Sector

NASA Technical Reports Server (NTRS)

Steele, Gynelle C.

1999-01-01

The NASA Lewis Research Center and Flow Parametrics will enter into an agreement to commercialize the National Combustion Code (NCC). This multidisciplinary combustor design system utilizes computer-aided design (CAD) tools for geometry creation, advanced mesh generators for creating solid model representations, a common framework for fluid flow and structural analyses, modern postprocessing tools, and parallel processing. This integrated system can facilitate and enhance various phases of the design and analysis process.

Computer-aided design and computer science technology

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Voigt, S. J.

1976-01-01

A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

Other ways of knowing: considerations for information communication in decision aid design1

PubMed Central

Basile, Melissa J.; Kozikowski, Andrzej; Akerman, Meredith; Liberman, Tara; McGinn, Thomas; Diefenbach, Michael A.

2016-01-01

Background Patients with advanced stage chronic obstructive pulmonary disease (COPD) may suffer severe respiratory exacerbations and need to decide between accepting life sustaining treatments versus foregoing these treatments (choosing comfort care only). We designed the InformedTogether decision aid to inform this decision, and describe results of a pilot study to assess usability focusing on participants’ trust in the content of the decision aid, acceptability, recommendations for improvement; and emotional reactions to this emotionally-laden decision. Methods Study participants (N=26) comprised of clinicians, patients, and surrogates viewed the decision aid, completed usability tasks, and participated in interviews and focus groups assessing comprehension, trust, perception of bias, and perceived acceptability of InformedTogether implementation. Mixed methods were used to analyze results. Results Almost all participants understood the gist (general meaning) of InformedTogether. However, many lower literacy participants had difficulty answering the more detailed questions related to comprehension, especially when interpreting icon arrays, and many were not aware that they had misunderstood the information. Qualitative analysis showed a range of emotional reactions to the information. Participants with low verbatim comprehension frequently referenced lived experiences when answering knowledge questions, which we termed “alternative knowledge”. Conclusion We found a range of emotional reactions to the information, and frequent use of alternative knowledge frameworks for deriving meaning from the data. These observations led to insights into the impact of lived experiences on the uptake of biomedical information presented in decision aids. Communicating prognostic information could potentially be improved by eliciting alternative knowledge as a starting ground to build communication, in particular for low literacy patients. Decision aids designed to facilitate shared decision making should elicit this knowledge and help clinicians tailor information accordingly. PMID:28061041

Methodology for Benefit Analysis of CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) in USN Shipyards.

DTIC Science & Technology

1984-03-01

difference calcula- tion, would result in erroneously lower productivity ratios. Only two topics are not adequately addressed with the method --the first...for determination of this term. 3. CAIDQS P.22li y §easuI~gZ._ Jelbo The next method differs significantly from the previous two in that it deals with...Chasen’s Method (as applied by Lonq Beach M.S.) . . . . . . . o . o . . . . . 31 2. Shah G Yans Method . . . . . . . . . . . 34 3. CARDOS Productivity

Application of computer-aided dispatch in law enforcement: An introductory planning guide

NASA Technical Reports Server (NTRS)

Sohn, R. L.; Gurfield, R. M.; Garcia, E. A.; Fielding, J. E.

1975-01-01

A set of planning guidelines for the application of computer-aided dispatching (CAD) to law enforcement is presented. Some essential characteristics and applications of CAD are outlined; the results of a survey of systems in the operational or planning phases are summarized. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Detailed descriptions of typical law enforcement CAD systems, and a list of vendor sources, are given in appendixes.

Ordering Design Tasks Based on Coupling Strengths

NASA Technical Reports Server (NTRS)

Rogers, J. L.; Bloebaum, C. L.

1994-01-01

The design process associated with large engineering systems requires an initial decomposition of the complex system into modules of design tasks which are coupled through the transference of output data. In analyzing or optimizing such a coupled system, it is essential to be able to determine which interactions figure prominently enough to significantly affect the accuracy of the system solution. Many decomposition approaches assume the capability is available to determine what design tasks and interactions exist and what order of execution will be imposed during the analysis process. Unfortunately, this is often a complex problem and beyond the capabilities of a human design manager. A new feature for DeMAID (Design Manager's Aid for Intelligent Decomposition) will allow the design manager to use coupling strength information to find a proper sequence for ordering the design tasks. In addition, these coupling strengths aid in deciding if certain tasks or couplings could be removed (or temporarily suspended) from consideration to achieve computational savings without a significant loss of system accuracy. New rules are presented and two small test cases are used to show the effects of using coupling strengths in this manner.

Ordering design tasks based on coupling strengths

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Bloebaum, Christina L.

1994-01-01

The design process associated with large engineering systems requires an initial decomposition of the complex system into modules of design tasks which are coupled through the transference of output data. In analyzing or optimizing such a coupled system, it is essential to be able to determine which interactions figure prominently enough to significantly affect the accuracy of the system solution. Many decomposition approaches assume the capability is available to determine what design tasks and interactions exist and what order of execution will be imposed during the analysis process. Unfortunately, this is often a complex problem and beyond the capabilities of a human design manager. A new feature for DeMAID (Design Manager's Aid for Intelligent Decomposition) will allow the design manager to use coupling strength information to find a proper sequence for ordering the design tasks. In addition, these coupling strengths aid in deciding if certain tasks or couplings could be removed (or temporarily suspended) from consideration to achieve computational savings without a significant loss of system accuracy. New rules are presented and two small test cases are used to show the effects of using coupling strengths in this manner.

Free software to analyse the clinical relevance of drug interactions with antiretroviral agents (SIMARV®) in patients with HIV/AIDS.

PubMed

Giraldo, N A; Amariles, P; Monsalve, M; Faus, M J

Highly active antiretroviral therapy has extended the expected lifespan of patients with HIV/AIDS. However, the therapeutic benefits of some drugs used simultaneously with highly active antiretroviral therapy may be adversely affected by drug interactions. The goal was to design and develop a free software to facilitate analysis, assessment, and clinical decision making according to the clinical relevance of drug interactions in patients with HIV/AIDS. A comprehensive Medline/PubMed database search of drug interactions was performed. Articles that recognized any drug interactions in HIV disease were selected. The publications accessed were limited to human studies in English or Spanish, with full texts retrieved. Drug interactions were analyzed, assessed, and grouped into four levels of clinical relevance according to gravity and probability. Software to systematize the information regarding drug interactions and their clinical relevance was designed and developed. Overall, 952 different references were retrieved and 446 selected; in addition, 67 articles were selected from the citation lists of identified articles. A total of 2119 pairs of drug interactions were identified; of this group, 2006 (94.7%) were drug-drug interactions, 1982 (93.5%) had an identified pharmacokinetic mechanism, and 1409 (66.5%) were mediated by enzyme inhibition. In terms of clinical relevance, 1285 (60.6%) drug interactions were clinically significant in patients with HIV (levels 1 and 2). With this information, a software program that facilitates identification and assessment of the clinical relevance of antiretroviral drug interactions (SIMARV ® ) was developed. A free software package with information on 2119 pairs of antiretroviral drug interactions was designed and developed that could facilitate analysis, assessment, and clinical decision making according to the clinical relevance of drug interactions in patients with HIV/AIDS. Copyright © 2016 Elsevier Inc. All rights reserved.

Computing Shapes Of Cascade Diffuser Blades

NASA Technical Reports Server (NTRS)

Tran, Ken; Prueger, George H.

1993-01-01

Computer program generates sizes and shapes of cascade-type blades for use in axial or radial turbomachine diffusers. Generates shapes of blades rapidly, incorporating extensive cascade data to determine optimum incidence and deviation angle for blade design based on 65-series data base of National Advisory Commission for Aeronautics and Astronautics (NACA). Allows great variability in blade profile through input variables. Also provides for design of three-dimensional blades by allowing variable blade stacking. Enables designer to obtain computed blade-geometry data in various forms: as input for blade-loading analysis; as input for quasi-three-dimensional analysis of flow; or as points for transfer to computer-aided design.

Large space antennas: A systems analysis case history

NASA Technical Reports Server (NTRS)

Keafer, Lloyd S. (Compiler); Lovelace, U. M. (Compiler)

1987-01-01

The value of systems analysis and engineering is aptly demonstrated by the work on Large Space Antennas (LSA) by the NASA Langley Spacecraft Analysis Branch. This work was accomplished over the last half-decade by augmenting traditional system engineering, analysis, and design techniques with computer-aided engineering (CAE) techniques using the Langley-developed Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. This report chronicles the research highlights and special systems analyses that focused the LSA work on deployable truss antennas. It notes developmental trends toward greater use of CAE techniques in their design and analysis. A look to the future envisions the application of improved systems analysis capabilities to advanced space systems such as an advanced space station or to lunar and Martian missions and human habitats.

Efficient Elastic-Plastic Design of Small Foundations.

DTIC Science & Technology

1982-09-22

tfcv**t 4%1)(14 4 s"sscm tepewitog the esaumpane laulkdeaft tawivc Ihe .ampsmun 44 * %IK)I % itcmi m eqsatens t wvfl Oka the , swot And she4.mak slig aid ...on loses. .14I It ReCeaf Wld IdenItify by bleoek rlumab) An elastic-plastic design analysis method is presented for small foundations which utilizes an...has the effect of predicting a carrying capacity somewhat less than that-of ordinary limit analysis . The energy storage capacity is calculated in a

Concurrent electromagnetic scattering analysis

NASA Technical Reports Server (NTRS)

Patterson, Jean E.; Cwik, Tom; Ferraro, Robert D.; Jacobi, Nathan; Liewer, Paulett C.; Lockhart, Thomas G.; Lyzenga, Gregory A.; Parker, Jay

1989-01-01

The computational power of the hypercube parallel computing architecture is applied to the solution of large-scale electromagnetic scattering and radiation problems. Three analysis codes have been implemented. A Hypercube Electromagnetic Interactive Analysis Workstation was developed to aid in the design and analysis of metallic structures such as antennas and to facilitate the use of these analysis codes. The workstation provides a general user environment for specification of the structure to be analyzed and graphical representations of the results.

Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison.

PubMed

Seruya, Mitchel; Fisher, Mark; Rodriguez, Eduardo D

2013-11-01

There has been rising interest in computer-aided design/computer-aided manufacturing for preoperative planning and execution of osseous free flap reconstruction. The purpose of this study was to compare outcomes between computer-assisted and conventional fibula free flap techniques for craniofacial reconstruction. A two-center, retrospective review was carried out on patients who underwent fibula free flap surgery for craniofacial reconstruction from 2003 to 2012. Patients were categorized by the type of reconstructive technique: conventional (between 2003 and 2009) or computer-aided design/computer-aided manufacturing (from 2010 to 2012). Demographics, surgical factors, and perioperative and long-term outcomes were compared. A total of 68 patients underwent microsurgical craniofacial reconstruction: 58 conventional and 10 computer-aided design and manufacturing fibula free flaps. By demographics, patients undergoing the computer-aided design/computer-aided manufacturing method were significantly older and had a higher rate of radiotherapy exposure compared with conventional patients. Intraoperatively, the median number of osteotomies was significantly higher (2.0 versus 1.0, p=0.002) and the median ischemia time was significantly shorter (120 minutes versus 170 minutes, p=0.004) for the computer-aided design/computer-aided manufacturing technique compared with conventional techniques; operative times were shorter for patients undergoing the computer-aided design/computer-aided manufacturing technique, although this did not reach statistical significance. Perioperative and long-term outcomes were equivalent for the two groups, notably, hospital length of stay, recipient-site infection, partial and total flap loss, and rate of soft-tissue and bony tissue revisions. Microsurgical craniofacial reconstruction using a computer-assisted fibula flap technique yielded significantly shorter ischemia times amidst a higher number of osteotomies compared with conventional techniques. Therapeutic, III.

Acquisition and production of skilled behavior in dynamic decision-making tasks

NASA Technical Reports Server (NTRS)

Kirlik, Alex

1993-01-01

Summaries of the four projects completed during the performance of this research are included. The four projects described are: Perceptual Augmentation Aiding for Situation Assessment, Perceptual Augmentation Aiding for Dynamic Decision-Making and Control, Action Advisory Aiding for Dynamic Decision-Making and Control, and Display Design to Support Time-Constrained Route Optimization. Papers based on each of these projects are currently in preparation. The theoretical framework upon which the first three projects are based, Ecological Task Analysis, was also developed during the performance of this research, and is described in a previous report. A project concerned with modeling strategies in human control of a dynamic system was also completed during the performance of this research.

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 3: Operational feasibility

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

An evaluation is presented which is defined as the adequacy of system design with known functional and performance requirements. The proposed Rockwell International AIDS 3 card, document and data flow are presented to summarize the concepts involved and the relationships between functions. The analysis and evaluation includes a study of system capability, processing rates, search requirements and response accuracy as well as a consideration of operational components and hardware integration. Results indicate that the AIDS 3 System concept is operationally feasible if production capacity is slightly enhanced but that operational complexity, hardware integration and a lack of conceptual data pertinent to some of the functions are areas of concern.

23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The...

DeMAID/GA USER'S GUIDE Design Manager's Aid for Intelligent Decomposition with a Genetic Algorithm

NASA Technical Reports Server (NTRS)

Rogers, James L.

1996-01-01

Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool that is available to aid in this decision making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial release of DEMAID in 1989, numerous enhancements have been added to aid the design manager in saving both cost and time in a design cycle. The key enhancement is a genetic algorithm (GA) and the enhanced version is called DeMAID/GA. The GA orders the sequence of design processes to minimize the cost and time to converge to a solution. These enhancements as well as the existing features of the original version of DEMAID are described. Two sample problems are used to show how these enhancements can be applied to improve the design cycle. This report serves as a user's guide for DeMAID/GA.

Modelling elderly cardiac patients decision making using Cognitive Work Analysis: identifying requirements for patient decision aids.

PubMed

Dhukaram, Anandhi Vivekanandan; Baber, Chris

2015-06-01

Patients make various healthcare decisions on a daily basis. Such day-to-day decision making can have significant consequences on their own health, treatment, care, and costs. While decision aids (DAs) provide effective support in enhancing patient's decision making, to date there have been few studies examining patient's decision making process or exploring how the understanding of such decision processes can aid in extracting requirements for the design of DAs. This paper applies Cognitive Work Analysis (CWA) to analyse patient's decision making in order to inform requirements for supporting self-care decision making. This study uses focus groups to elicit information from elderly cardiovascular disease (CVD) patients concerning a range of decision situations they face on a daily basis. Specifically, the focus groups addressed issues related to the decision making of CVD in terms of medication compliance, pain, diet and exercise. The results of these focus groups are used to develop high level views using CWA. CWA framework decomposes the complex decision making problem to inform three approaches to DA design: one design based on high level requirements; one based on a normative model of decision-making for patients; and the third based on a range of heuristics that patients seem to use. CWA helps in extracting and synthesising decision making from different perspectives: decision processes, work organisation, patient competencies and strategies used in decision making. As decision making can be influenced by human behaviour like skills, rules and knowledge, it is argued that patients require support to different types of decision making. This paper also provides insights for designers in using CWA framework for the design of effective DAs to support patients in self-management. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Analysis and design of a 10 to 30 kW grid-connected solar power system for the JPL fire station and first aid station

NASA Technical Reports Server (NTRS)

Josephs, R. H.

1982-01-01

The design and performance of a modestly sized utility-connected power conditioning system and its supporting photovoltaic collector are described and estimated. Utility preparations and guidelines to conform with the output of a small generating station with that of a large power network are examined.

The Differences in Health Care Utilization between Medical Aid and Health Insurance: A Longitudinal Study Using Propensity Score Matching

PubMed Central

Kim, Jae-Hyun; Lee, Kwang-Soo; Yoo, Ki-Bong; Park, Eun-Cheol

2015-01-01

Study Objectives Health care utilization has progressively increased, especially among Medical Aid beneficiaries in South Korea. The Medical Aid classifies beneficiaries into two categories, type 1 and 2, on the basis of being incapable (those under 18 or over 65 years of age, or disabled) or capable of working, respectively. Medical Aid has a high possibility for health care utilization due to high coverage level. In South Korea, the national health insurance (NHI) achieved very short time to establish coverage for the entire Korean population. However there there remaine a number of problems to be solved. Therefore, the objective of this study was to investigate the differences in health care utilization between Medical Aid beneficiaries and Health Insurance beneficiaries. Methods & Design Data were collected from the Korean Welfare Panel Study from 2008 to 2012 using propensity score matching. Of the 2,316 research subjects, 579 had Medical Aid and 1,737 had health insurance. We also analyzed three dependent variables: days spent in the hospital, number of outpatient visits, and hospitalizations per year. Analysis of variance and longitudinal data analysis were used. Results The number of outpatient visits was 1.431 times higher (p<0.0001) in Medical Aid beneficiaries, the number of hospitalizations per year was 1.604 times higher (p<0.0001) in Medical Aid beneficiaries, and the number of days spent in the hospital per year was 1.282 times higher (p<0.268) for Medical Aid beneficiaries than in individuals with Health Insurance. Medical Aid patients had a 0.874 times lower frequency of having an unmet needs due to economic barrier (95% confidence interval: 0.662-1.156). Conclusions Health insurance coverage has an impact on health care utilization. More health care utilization among Medical Aid beneficiaries appears to have a high possibility of a moral hazard risk under the Health Insurance program. Therefore, the moral hazard for Medical Aid beneficiaries should be avoided. PMID:25816234

Arrow-wing supersonic cruise aircraft structural design concepts evaluation. Volume 3: Sections 12 through 14

NASA Technical Reports Server (NTRS)

Sakata, I. F.; Davis, G. W.

1975-01-01

The design of an economically viable supersonic cruise aircraft requires the lowest attainable structural-mass fraction commensurate with the selected near-term structural material technology. To achieve this goal of minimum structural-mass fraction, various combinations of promising wing and fuselage primary structure were analyzed for the load-temperature environment applicable to the arrow wing configuration. This analysis was conducted in accordance with the design criteria specified and included extensive use of computer-aided analytical methods to screen the candidate concepts and select the most promising concepts for the in-depth structural analysis.

Health Insurance Portability and Accountability Act-Compliant Ocular Telehealth Network for the Remote Diagnosis and Management of Diabetic Retinopathy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yaquin; Karnowski, Thomas Paul; Tobin Jr, Kenneth William

2011-01-01

In this article, we present the design and implementation of a regional ocular telehealth network for remote assessment and management of diabetic retinopathy (DR), including the design requirements, network topology, protocol design, system work flow, graphics user interfaces, and performance evaluation. The Telemedical Retinal Image Analysis and Diagnosis Network is a computer-aided, image analysis telehealth paradigm for the diagnosis of DR and other retinal diseases using fundus images acquired from primary care end users delivering care to underserved patient populations in the mid-South and southeastern United States.

A health insurance portability and accountability act-compliant ocular telehealth network for the remote diagnosis and management of diabetic retinopathy.

PubMed

Li, Yaqin; Karnowski, Thomas P; Tobin, Kenneth W; Giancardo, Luca; Morris, Scott; Sparrow, Sylvia E; Garg, Seema; Fox, Karen; Chaum, Edward

2011-10-01

In this article, we present the design and implementation of a regional ocular telehealth network for remote assessment and management of diabetic retinopathy (DR), including the design requirements, network topology, protocol design, system work flow, graphics user interfaces, and performance evaluation. The Telemedical Retinal Image Analysis and Diagnosis Network is a computer-aided, image analysis telehealth paradigm for the diagnosis of DR and other retinal diseases using fundus images acquired from primary care end users delivering care to underserved patient populations in the mid-South and southeastern United States.

On the design and structural analysis of jet engine fan blade structures

NASA Astrophysics Data System (ADS)

Amoo, Leye M.

2013-07-01

Progress in the design and structural analysis of commercial jet engine fan blades is reviewed and presented. This article is motivated by the key role fan blades play in the performance of advanced gas turbine jet engines. The fundamentals of the associated physics are emphasized. Recent developments and advancements have led to an increase and improvement in fan blade structural durability, stability and reliability. This article is intended as a high level review of the fan blade environment and current state of structural design to aid further research in developing new and innovative fan blade technologies.

The AIDS Memorial Quilt as preventative education: a developmental analysis of the Quilt.

PubMed

Knaus, C S; Austin, E W

1999-12-01

This study consisted of a survey given to college students (N = 560) at a rural university in the Pacific Northwest. The sample was randomly assigned into four groups, following the Solomon four-group study design. The two levels of treatment included interventions consisting of a visit to the AIDS Memorial Quilt for the experimental groups and attendance at an unrelated event for the control groups. Pretests were completed 4 weeks prior to interventions; posttests were completed by the entire sample 4 weeks after the interventions. Results confirmed expected differences among the four groups in terms of social distance, perceptions of people with AIDS, self-efficacy, and discussion of risky behavior. The results suggest that the AIDS Memorial Quilt addresses issues centrally related to behavior change and indicates support for the message interpretation process and stages of change models.

Wide-field Imaging System and Rapid Direction of Optical Zoom (WOZ)

DTIC Science & Technology

2010-09-25

commercial software packages: SolidWorks, COMSOL Multiphysics, and ZEMAX optical design. SolidWorks is a computer aided design package, which as a live...interface to COMSOL. COMSOL is a finite element analysis/partial differential equation solver. ZEMAX is an optical design package. Both COMSOL and... ZEMAX have live interfaces to MatLab. Our initial investigations have enabled a model in SolidWorks to be updated in COMSOL, an FEA calculation

A graphics approach in the design of the dual air density Explorer satellites

NASA Technical Reports Server (NTRS)

Mcdougal, D. S.

1975-01-01

A computer program was developed to generate a graphics display of the Dual Air Density (DAD) Explorer satellites which aids in the engineering and scientific design. The program displays a two-dimensional view of both spacecraft and their surface features from any direction. The graphics have been an indispensable tool in the design, analysis, and understanding of the critical locations of the various surface features for both satellites.

System Re-engineering Project Executive Summary

DTIC Science & Technology

1991-11-01

Management Information System (STAMIS) application. This project involved reverse engineering, evaluation of structured design and object-oriented design, and re- implementation of the system in Ada. This executive summary presents the approach to re-engineering the system, the lessons learned while going through the process, and issues to be considered in future tasks of this nature.... Computer-Aided Software Engineering (CASE), Distributed Software, Ada, COBOL, Systems Analysis, Systems Design, Life Cycle Development, Functional Decomposition, Object-Oriented

Preloaded joint analysis methodology for space flight systems

NASA Technical Reports Server (NTRS)

Chambers, Jeffrey A.

1995-01-01

This report contains a compilation of some of the most basic equations governing simple preloaded joint systems and discusses the more common modes of failure associated with such hardware. It is intended to provide the mechanical designer with the tools necessary for designing a basic bolted joint. Although the information presented is intended to aid in the engineering of space flight structures, the fundamentals are equally applicable to other forms of mechanical design.

Children's Television Programming and Public Broadcasting: An Analysis and Assessment of Needs. Executive Summary.

ERIC Educational Resources Information Center

Seaver, Judith W.; Weber, Stephen J.

Designed to serve as a resource book to aid decision making by Corporation for Public Broadcasting (CPB) staff and advisory panels, this report consists of a review and analysis of the current state of children's television programming. Major sections of the report are devoted to describing and analyzing children's television programming in the…

Photomat: A Mobile Tool for Aiding in Student Construction of Research Questions and Data Analysis

ERIC Educational Resources Information Center

Shelley, Tia Renee; Dasgupta, Chandan; Silva, Alexandra; Lyons, Leilah; Moher, Tom

2015-01-01

This paper presents a new mobile software tool, PhotoMAT (Photo Management and Analysis Tool), and students' experiences with this tool within a scaffolded curricular unit--Neighborhood Safari. PhotoMAT was designed to support learners' investigations of backyard animal behavior and works with image sets obtained using fixed-position field cameras…

A Learner Analysis of International Female Doctoral Students' Experiences at an American University

ERIC Educational Resources Information Center

Ogbonaya, Agnes I.

2010-01-01

The purpose of this study was to investigate international female doctoral students' perceptions of the challenges they faced in a foreign university, and their strategies for success. The theoretical framework underlying this study focused on the need for learner analysis to aid the design of effective instruction. The participants in this study…

Meta-Analysis of PECS with Individuals with ASD: Investigation of Targeted versus Non-Targeted Outcomes, Participant Characteristics, and Implementation Phase

ERIC Educational Resources Information Center

Ganz, Jennifer B.; Davis, John L.; Lund, Emily M.; Goodwyn, Fara D.; Simpson, Richard L.

2012-01-01

The Picture Exchange Communication System (PECS) is a widely used picture/icon aided augmentative communication system designed for learners with autism and other developmental disorders. This meta-analysis analyzes the extant empirical literature for PECS relative to targeted (functional communication) and non-targeted concomitant outcomes…

Risk of Melanoma in People with HIV/AIDS in the Pre- and Post-HAART Eras: A Systematic Review and Meta-Analysis of Cohort Studies

PubMed Central

Olsen, Catherine M.; Knight, Lani L.; Green, Adèle C.

2014-01-01

Objective Following the introduction of highly active antiretroviral therapy (HAART) the risk of AIDS-defining cancers decreased but incidence of many non-AIDS-defining cancers has reportedly increased in those with HIV/AIDS. Whether melanoma risk has also changed in HIV/AIDS patients post-HAART is unknown and therefore we evaluated this in comparison with the risk before HAART. Design Systematic review and meta-analysis. Methods We searched Medline, Embase and ISI science citation index databases to April 2013. All cohort studies of patients diagnosed with HIV/AIDS that permitted quantitative assessment of the association with melanoma were eligible. Detailed quality assessment of eligible studies was conducted, focussing particularly on adjustment for ethnicity, a priori considered essential for an unbiased assessment of melanoma risk. Data were pooled using a random effects model. Results From 288 articles, we identified 21 that met the inclusion criteria, 13 presenting data for the post-HAART era and 8 for the pre-HAART era. Post-HAART the pooled relative risk (pRR) for the association between HIV/AIDS and melanoma was 1.26 (95% CI, 0.97–1.64) and 1.50 (95% CI 1.12–2.01) among studies that accounted for ethnicity, with evidence of significant heterogeneity (P = 0.004, I2 = 55.5). Pre-HAART pRRs were 1.26 (95% CI 1.11–1.43; Phet = 0.82) and 1.28 (95% CI 1.10–1.49) among studies adjusted for ethnicity. Conclusions People with HIV/AIDS remain at a significantly increased risk of developing melanoma in the post-HAART era. White skinned people with HIV/AIDS should be screened regularly and counselled against excessive sun exposure. PMID:24740329

Human factors issues and approaches in the spatial layout of a space station control room, including the use of virtual reality as a design analysis tool

NASA Technical Reports Server (NTRS)

Hale, Joseph P., II

1994-01-01

Human Factors Engineering support was provided for the 30% design review of the late Space Station Freedom Payload Control Area (PCA). The PCA was to be the payload operations control room, analogous to the Spacelab Payload Operations Control Center (POCC). This effort began with a systematic collection and refinement of the relevant requirements driving the spatial layout of the consoles and PCA. This information was used as input for specialized human factors analytical tools and techniques in the design and design analysis activities. Design concepts and configuration options were developed and reviewed using sketches, 2-D Computer-Aided Design (CAD) drawings, and immersive Virtual Reality (VR) mockups.

Aligning HIV/AIDS communication with the oral tradition of Africans: a theory-based content analysis of songs' potential in prevention efforts.

PubMed

Bekalu, Mesfin Awoke; Eggermont, Steven

2015-01-01

Despite a growing recognition of songs as a useful HIV/AIDS campaign strategy, little research has investigated their potential and/or actual impact. In this study, through a theory-based content analysis, we have assessed the prevention domains covered and the health-relevant constructs promoted by 23 AIDS songs widely used to aid prevention efforts in Ethiopia. To identify the health-relevant constructs and reveal their potential to facilitate or inhibit positive changes, the Extended Parallel Process Model (EPPM) has been used. The findings revealed that the songs cover most of the prevention domains that constitute the current agenda of behavior change communication in Sub-Saharan Africa. However, although all the EPPM variables have been found in almost every song, there were significantly more efficacy messages than threat messages. This suggests that although the songs may lead to positive changes in HIV/AIDS-related outcomes among audiences who have already perceived the threat posed by HIV/AIDS, they are less likely to motivate and thereby generate responses from audiences who have less or no threat perceptions. It is argued that given their potential as a culturally appropriate strategy in Sub-Saharan Africa where oral channels of communication play significant roles, songs could be harnessed for better outcomes through a theory-based design.

Educational Television: Brazil.

ERIC Educational Resources Information Center

Bretz, R.; Shinar, D.

Based on evaluation of nine Brazilian educational television centers, an Instructional Television Training Model (ITV) was developed to aid in determining and designing training requirements for instructional television systems. Analysis based on this model would include these tasks: (1) determine instructional purpose of the television…

Using APEX to Model Anticipated Human Error: Analysis of a GPS Navigational Aid

NASA Technical Reports Server (NTRS)

VanSelst, Mark; Freed, Michael; Shefto, Michael (Technical Monitor)

1997-01-01

The interface development process can be dramatically improved by predicting design facilitated human error at an early stage in the design process. The approach we advocate is to SIMULATE the behavior of a human agent carrying out tasks with a well-specified user interface, ANALYZE the simulation for instances of human error, and then REFINE the interface or protocol to minimize predicted error. This approach, incorporated into the APEX modeling architecture, differs from past approaches to human simulation in Its emphasis on error rather than e.g. learning rate or speed of response. The APEX model consists of two major components: (1) a powerful action selection component capable of simulating behavior in complex, multiple-task environments; and (2) a resource architecture which constrains cognitive, perceptual, and motor capabilities to within empirically demonstrated limits. The model mimics human errors arising from interactions between limited human resources and elements of the computer interface whose design falls to anticipate those limits. We analyze the design of a hand-held Global Positioning System (GPS) device used for radical and navigational decisions in small yacht recalls. The analysis demonstrates how human system modeling can be an effective design aid, helping to accelerate the process of refining a product (or procedure).

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

ERIC Educational Resources Information Center

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

[Preliminary construction of a questionnaire about knowledge of HIV/AIDS in Colombian veterans].

PubMed

Segura-Cardona, Angela; Berbesí-Fernández, Dedsy; Cardona-Arango, Doris; Ordóñez-Molina, Jaime

2011-01-01

In order to identify the level of knowledge about HIV/AIDS in Colombia veterans of war in the year 2009, a questionnaire was designed, built and validated, using a mixed design, for which three stages were followed: 1) Bibliographic review and construction of items of the questionnaire using a focus group, 2) Evaluation of content validity by a pannel of experts, 3) APLICACION of the final questionnaire, we selected non-randomly 323 people who were part of group of veterans in Colombia, and 4) Validation of the questionnaire through the evaluation of internal consistency and principal component analysis. We found that the questionnaire explored three factors: forms of infection, inadequate beliefs, and HIV prevention, which accounted for 52% of the variance. The survey showed adequate internal consistency values (Cronbach's α = 0.77). These results suggest the use of the questionnaire to assess knowledge level related to the form of infection, inaccurate beliefs and prevention of HIV-AIDS in this population.

Program management aid for redundancy selection and operational guidelines

NASA Technical Reports Server (NTRS)

Hodge, P. W.; Davis, W. L.; Frumkin, B.

1972-01-01

Although this criterion was developed specifically for use on the shuttle program, it has application to many other multi-missions programs (i.e. aircraft or mechanisms). The methodology employed is directly applicable even if the tools (nomographs and equations) are for mission peculiar cases. The redundancy selection criterion was developed to insure that both the design and operational cost impacts (life cycle costs) were considered in the selection of the quantity of operational redundancy. These tools were developed as aids in expediting the decision process and not intended as the automatic decision maker. This approach to redundancy selection is unique in that it enables a pseudo systems analysis to be performed on an equipment basis without waiting for all designs to be hardened.

Space crew radiation exposure analysis system based on a commercial stand-alone CAD system

NASA Technical Reports Server (NTRS)

Appleby, Matthew H.; Golightly, Michael J.; Hardy, Alva C.

1992-01-01

Major improvements have recently been completed in the approach to spacecraft shielding analysis. A Computer-Aided Design (CAD)-based system has been developed for determining the shielding provided to any point within or external to the spacecraft. Shielding analysis is performed using a commercially available stand-alone CAD system and a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design projects such as a Mars transfer habitat, pressurized lunar rover, and the redesigned Space Station. Results of these analyses are provided to demonstrate the applicability and versatility of the system.

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 4: Economic feasibility

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The results of the economic analysis of the AIDS 3 system design are presented. AIDS 3 evaluated a set of economic feasibility measures including life cycle cost, implementation cost, annual operating expenditures and annual capital expenditures. The economic feasibility of AIDS 3 was determined by comparing the evaluated measures with the same measures, where applicable, evaluated for the current system. A set of future work load scenarios was constructed using JPL's environmental evaluation study of the fingerprint identification system. AIDS 3 and the current system were evaluated for each of the economic feasibility measures for each of the work load scenarios. They were compared for a set of performance measures, including response time and accuracy, and for a set of cost/benefit ratios, including cost per transaction and cost per technical search. Benefit measures related to the economic feasibility of the system are also presented, including the required number of employees and the required employee skill mix.

Content addressable memory project

NASA Technical Reports Server (NTRS)

Hall, J. Storrs; Levy, Saul; Smith, Donald E.; Miyake, Keith M.

1992-01-01

A parameterized version of the tree processor was designed and tested (by simulation). The leaf processor design is 90 percent complete. We expect to complete and test a combination of tree and leaf cell designs in the next period. Work is proceeding on algorithms for the computer aided manufacturing (CAM), and once the design is complete we will begin simulating algorithms for large problems. The following topics are covered: (1) the practical implementation of content addressable memory; (2) design of a LEAF cell for the Rutgers CAM architecture; (3) a circuit design tool user's manual; and (4) design and analysis of efficient hierarchical interconnection networks.

Manipulating the Geometric Computer-aided Design of the Operational Requirements-based Casualty Assessment Model within BRL-CAD

DTIC Science & Technology

2018-03-30

ARL-TR-8336 ● MAR 2018 US Army Research Laboratory Manipulating the Geometric Computer-aided Design of the Operational...so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an official endorsement or approval of...Army Research Laboratory Manipulating the Geometric Computer-aided Design of the Operational Requirements-based Casualty Assessment Model within

Computer-aided design development transition for IPAD environment

NASA Technical Reports Server (NTRS)

Owens, H. G.; Mock, W. D.; Mitchell, J. C.

1980-01-01

The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

29 CFR 541.401 - Computer manufacture and repair.

Code of Federal Regulations, 2011 CFR

2011-07-01

... DEFINING AND DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE..., the use of computers and computer software programs (e.g., engineers, drafters and others skilled in computer-aided design software), but who are not primarily engaged in computer systems analysis and...

Psychometric Analysis of the Thermochemistry Concept Inventory

ERIC Educational Resources Information Center

Wren, David; Barbera, Jack

2014-01-01

Assessing conceptual understanding of foundational topics before instruction on higher-order concepts can provide chemical educators with information to aid instructional design. This study provides an instrument that can be used to identify students' alternative conceptions regarding thermochemistry concepts. The Thermochemistry Concept Inventory…

Design Aids for Real-Time Systems (DARTS)

NASA Technical Reports Server (NTRS)

Szulewski, P. A.

1982-01-01

Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

PubMed

Lee, M-Y; Chang, C-C; Ku, Y C

2008-01-01

Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

Thermo-mechanical design aspects of mercury bombardment ion thrusters.

NASA Technical Reports Server (NTRS)

Schnelker, D. E.; Kami, S.

1972-01-01

The mechanical design criteria are presented as background considerations for solving problems associated with the thermomechanical design of mercury ion bombardment thrusters. Various analytical procedures are used to aid in the development of thruster subassemblies and components in the fields of heat transfer, vibration, and stress analysis. Examples of these techniques which provide computer solutions to predict and control stress levels encountered during launch and operation of thruster systems are discussed. Computer models of specific examples are presented.

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume I. Executive Summary

DTIC Science & Technology

1981-02-01

SUMMARY Robert N. Parrish, Jesse L. Gates, and Sarah J. Munger SYNECTICS CORPORATION HUMAN FACTORS TECHNICAL AREA L.. .iU. S. Army Research Institute for...of the Human Factors Technical Area, ARI, is the Contracting Officer’s Representative (COR) for this project. 19. KEY WORDS (Continue on reverse...aide It neceeary ad Identify by block number) Battlefield automated systems Human -computer interaction Design criteria System analysis Design guidelines

Communicating Experimental Findings in Single Case Design Research: How to Use Celeration Values and Celeration Multipliers to Measure Direction, Magnitude, and Change of Slope

ERIC Educational Resources Information Center

Datchuk, Shawn M.; Kubina, Richard M., Jr.

2011-01-01

The accumulation of scientific knowledge greatly depends upon the critical review of experimental findings by ones peers. In single case design research, experimenters present findings with graphical displays of data and narrative description of a visual analysis. To aid in efficient and accurate description of experimental findings, the research…

Solar-heating and cooling system design package

NASA Technical Reports Server (NTRS)

1980-01-01

Package of information includes design data, performance specifications, drawings, hazard analysis, and spare parts list for commercially produced system installed in single-family dwelling in Akron, Ohio. System uses air flat-plate collectors, 12000 kg rock storage and backup heat pump. Solar portion requires 0.7 kW, and provides 35% of average total heating load including hot water. Information aids persons considering installing solar home-heating systems.

A User's Guide to the Meta-Analysis of Research Studies. Meta-Stat: Software To Aid in the Meta-Analysis of Research Findings.

ERIC Educational Resources Information Center

Rudner, Lawrence M.; Glass Gene V.; Evartt, David L.; Emery, Patrick J.

This manual and the accompanying software are intended to provide a step-by-step guide to conducting a meta-analytic study along with references for further reading and free high-quality software, "Meta-Stat.""Meta-Stat" is a comprehensive package designed to help in the meta-analysis of research studies in the social and behavioral sciences.…

Graphic analysis of resources by numerical evaluation techniques (Garnet)

USGS Publications Warehouse

Olson, A.C.

1977-01-01

An interactive computer program for graphical analysis has been developed by the U.S. Geological Survey. The program embodies five goals, (1) economical use of computer resources, (2) simplicity for user applications, (3) interactive on-line use, (4) minimal core requirements, and (5) portability. It is designed to aid (1) the rapid analysis of point-located data, (2) structural mapping, and (3) estimation of area resources. ?? 1977.

Flexible structure control experiments using a real-time workstation for computer-aided control engineering

NASA Technical Reports Server (NTRS)

Stieber, Michael E.

1989-01-01

A Real-Time Workstation for Computer-Aided Control Engineering has been developed jointly by the Communications Research Centre (CRC) and Ruhr-Universitaet Bochum (RUB), West Germany. The system is presently used for the development and experimental verification of control techniques for large space systems with significant structural flexibility. The Real-Time Workstation essentially is an implementation of RUB's extensive Computer-Aided Control Engineering package KEDDC on an INTEL micro-computer running under the RMS real-time operating system. The portable system supports system identification, analysis, control design and simulation, as well as the immediate implementation and test of control systems. The Real-Time Workstation is currently being used by CRC to study control/structure interaction on a ground-based structure called DAISY, whose design was inspired by a reflector antenna. DAISY emulates the dynamics of a large flexible spacecraft with the following characteristics: rigid body modes, many clustered vibration modes with low frequencies and extremely low damping. The Real-Time Workstation was found to be a very powerful tool for experimental studies, supporting control design and simulation, and conducting and evaluating tests withn one integrated environment.

Financial Aid for Veterans, Military Personnel and Their Dependents, 1996-1998. A List of: Scholarships, Fellowships/Grants, Loans, Grants-in-Aid, Awards, and Internships Designed Primarily or Exclusively for Veterans, Military Personnel, and Their Dependents; State Sources of Benefits; and Reference Source on Financial Aids.

ERIC Educational Resources Information Center

Schlachter, Gail Ann; Weber, R. David

This directory lists 1,207 student financial aid programs or other services designed primarily or exclusively for veterans, military personnel, and their dependents. An introduction provides a sample entry and explains how to use the directory. The section on financial aid programs is organized, first, by type of aid scholarship, fellowship or…

Man-machine interface analysis of the flight design system

NASA Technical Reports Server (NTRS)

Ramsey, H. R.; Atwood, M. E.; Willoughby, J. K.

1978-01-01

The objective of the current effort was to perform a broad analysis of the human factors issues involved in the design of the Flight Design System (FDS). The analysis was intended to include characteristics of the system itself, such as: (1) basic structure and functional capabilities of FDS; (2) user backgrounds, capabilities, and possible modes of use; (3) FDS interactive dialogue, problem solving aids; (4) system data management capabilities; and to include, as well, such system related matters as: (1) flight design team structure; (2) roles of technicians; (3) user training; and (4) methods of evaluating system performance. Wherever possible, specific recommendations are made. In other cases, the issues which seem most important are identified. In some cases, additional analyses or experiments which might provide resolution are suggested.

Software and resources for computational medicinal chemistry

PubMed Central

Liao, Chenzhong; Sitzmann, Markus; Pugliese, Angelo; Nicklaus, Marc C

2011-01-01

Computer-aided drug design plays a vital role in drug discovery and development and has become an indispensable tool in the pharmaceutical industry. Computational medicinal chemists can take advantage of all kinds of software and resources in the computer-aided drug design field for the purposes of discovering and optimizing biologically active compounds. This article reviews software and other resources related to computer-aided drug design approaches, putting particular emphasis on structure-based drug design, ligand-based drug design, chemical databases and chemoinformatics tools. PMID:21707404

Photogrammetry and computer-aided piping design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keneflick, J.F.; Chirillo, R.D.

1985-02-18

Three-dimensional measurements taken from photographs of a plant model can be digitized and linked with computer-aided piping design. This can short-cut the design and construction of new plants and expedite repair and retrofitting projects. Some designers bridge the gap between model and computer by digitizing from orthographic prints obtained via orthography or the laser scanning of model sections. Such valve or fitting then processed is described in this paper. The marriage of photogrammetry and computer-aided piping design can economically produce such numerical drawings.

COMMAND: A FORTRAN program for simplified composite analysis and design. [computerized design of multilayered composite panels

NASA Technical Reports Server (NTRS)

Vanderplaats, G. N.

1976-01-01

A FORTRAN program is presented for preliminary analysis and design of multilayered composite panels subjected to inplane loads. All plys are of the same material. The composite is assumed symmetric about the midplane, but need not be balanced. Failure criterion includes limit ply strains and lower bounds on composite inplane stiffnesses. Multiple load conditions are considered. The required input data is defined and examples are provided to aid the use in making the program operational. Average panel design times are two seconds on an IBM 360/67 computer. Results are compared with published literature. A complete FORTRAN listing of program COMAND is provided. In addition, the optimization program CONMIN is required for design.

Moderation of effects of AAC based on setting and types of aided AAC on outcome variables: an aggregate study of single-case research with individuals with ASD.

PubMed

Ganz, Jennifer B; Rispoli, Mandy J; Mason, Rose Ann; Hong, Ee Rea

2014-06-01

The purpose of this meta-analysis was to evaluate the potential moderating effects of intervention setting and type of aided augmentative and alternative communication (AAC) on outcome variables for students with autism spectrum disorders. Improvement rate difference, an effect size measure, was used to calculate aggregate effects across 35 single-case research studies. Results indicated that the largest effects for aided AAC were observed in general education settings. With respect to communication outcomes, both speech generating devices (SGDs) and the Picture Exchange Communication System (PECS) were associated with larger effects than other picture-based systems. With respect to challenging behaviour outcomes, SGDs produced larger effects than PECS. This aggregate study highlights the importance of considering intervention setting, choice of AAC system and target outcomes when designing and planning an aided AAC intervention.

Toward automatic finite element analysis

NASA Technical Reports Server (NTRS)

Kela, Ajay; Perucchio, Renato; Voelcker, Herbert

1987-01-01

Two problems must be solved if the finite element method is to become a reliable and affordable blackbox engineering tool. Finite element meshes must be generated automatically from computer aided design databases and mesh analysis must be made self-adaptive. The experimental system described solves both problems in 2-D through spatial and analytical substructuring techniques that are now being extended into 3-D.

Pathways to Identity: Aiding Law Enforcement in Identification Tasks With Visual Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce, Joseph R.; Scholtz, Jean; Hodges, Duncan

The nature of identity has changed dramatically in recent years, and has grown in complexity. Identities are defined in multiple domains: biological and psychological elements strongly contribute, but also biographical and cyber elements are necessary to complete the picture. Law enforcement is beginning to adjust to these changes, recognizing its importance in criminal justice. The SuperIdentity project seeks to aid law enforcement officials in their identification tasks through research of techniques for discovering identity traits, generation of statistical models of identity and analysis of identity traits through visualization. We present use cases compiled through user interviews in multiple fields, includingmore » law enforcement, as well as the modeling and visualization tools design to aid in those use cases.« less

Pathways to Identity. Using Visualization to Aid Law Enforcement in Identification Tasks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruce, Joseph R.; Scholtz, Jean; Hodges, Duncan

The nature of identity has changed dramatically in recent years and has grown in complexity. Identities are defined in multiple domains: biological and psychological elements strongly contribute, but biographical and cyber elements also are necessary to complete the picture. Law enforcement is beginning to adjust to these changes, recognizing identity’s importance in criminal justice. The SuperIdentity project seeks to aid law enforcement officials in their identification tasks through research of techniques for discovering identity traits, generation of statistical models of identity and analysis of identity traits through visualization. We present use cases compiled through user interviews in multiple fields, includingmore » law enforcement, and describe the modeling and visualization tools design to aid in those use cases.« less

Longitudinal predictors of aided speech audibility in infants and children

PubMed Central

McCreery, Ryan W.; Walker, Elizabeth A.; Spratford, Meredith; Bentler, Ruth; Holte, Lenore; Roush, Patricia; Oleson, Jacob; Van Buren, John; Moeller, Mary Pat

2015-01-01

Objectives Amplification is a core component of early intervention for children who are hard of hearing (CHH), but hearing aids (HAs) have unique effects that may be independent from other components of the early intervention process, such as caregiver training or speech and language intervention. The specific effects of amplification are rarely described in studies of developmental outcomes. The primary purpose of this manuscript is to quantify aided speech audibility during the early childhood years and examine the factors that influence audibility with amplification for children in the Outcomes of Children with Hearing Loss (OCHL) study. Design Participants were 288 children with permanent hearing loss who were followed as part of the OCHL study. All of the children in this analysis had bilateral hearing loss and wore air-conduction behind-the-ear HAs. At every study visit, hearing thresholds were measured using developmentally-appropriate behavioral methods. Data were obtained for a total of 1043 audiometric evaluations across all subjects for the first four study visits. In addition, the aided audibility of speech through the HA was assessed using probe microphone measures. Hearing thresholds and aided audibility were analyzed. Repeated-measures analyses of variance were conducted to determine if patterns of thresholds and aided audibility were significantly different between ears (left vs. right) or across the first four study visits. Furthermore, a cluster analysis was performed based on the aided audibility at entry into the study, aided audibility at the child’s final visit, and change in aided audibility between these two intervals to determine if there were different patterns of longitudinal aided audibility within the sample. Results Eighty-four percent of children in the study had stable audiometric thresholds during the study, defined as threshold changes <10 dB for any single study visit. There were no significant differences in hearing thresholds, aided audibility, or deviation of the HA fitting from prescriptive targets between ears or across test intervals for the first four visits. Approximately 35% of the children in the study had aided audibility that was below the average for the normative range for the Speech Intelligibility Index (SII) based on degree of hearing loss. The cluster analysis of longitudinal aided audibility revealed three distinct groups of children: a group with consistently high aided audibility throughout the study, a group with decreasing audibility during the study, and a group with consistently low aided audibility. Conclusions The current results indicated that approximately 65% of children in the study had adequate aided audibility of speech and stable hearing during the study period. Limited audibility was associated with greater degrees of hearing loss and larger deviations from prescriptive targets. Studies of developmental outcomes will help to determine how aided audibility is necessary to affects developmental outcomes in CHH. PMID:26731156

CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

ERIC Educational Resources Information Center

Havas, George D.

This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

Using the theory of planned behaviour to understand the motivation to learn about HIV/AIDS prevention among adolescents in Tigray, Ethiopia.

PubMed

Gebreeyesus Hadera, H; Boer, H; Kuiper, W A J M

2007-08-01

Various studies indicate that school- or university-based HIV prevention curricula can reduce the prevalence of sexual risk behaviour among adolescent youth in Sub-Saharan Africa. However, effective HIV/AIDS prevention education may be problematic, if the needs of youth are not served adequately. To date, little attention has been given to the motivation of youth to learn about HIV/AIDS and about their preferences for HIV/AIDS curriculum design options. The aim of this study was to get insight into the determinants of the motivation of youth to learn about HIV/AIDS prevention and to assess their curriculum design preferences. Students from a university in Tigray, Ethiopia, filled out a structured questionnaire, which assessed demographics, variables that according to the Theory of Planned Behaviour are related to the motivation to learn, and their preferences for independent, carrier and integrated HIV/AIDS curriculum designs. On average, participants were highly motivated to learn about HIV/AIDS. Motivation to learn was primarily related to social norms and was not related to self-efficacy to discuss HIV/AIDS in class. The often discussed reluctance to discuss sexuality and condom use in curricula in Sub-Saharan Africa, seems to be more related to existing negative social norms, than to lack of self-efficacy. Participants revealed a high preference for the independent, carrier and integrated curriculum design options. However, students with a higher motivation to learn about HIV/AIDS were more attracted to the independent course design.

Computer Aided Drug Design: Success and Limitations.

PubMed

Baig, Mohammad Hassan; Ahmad, Khurshid; Roy, Sudeep; Ashraf, Jalaluddin Mohammad; Adil, Mohd; Siddiqui, Mohammad Haris; Khan, Saif; Kamal, Mohammad Amjad; Provazník, Ivo; Choi, Inho

2016-01-01

Over the last few decades, computer-aided drug design has emerged as a powerful technique playing a crucial role in the development of new drug molecules. Structure-based drug design and ligand-based drug design are two methods commonly used in computer-aided drug design. In this article, we discuss the theory behind both methods, as well as their successful applications and limitations. To accomplish this, we reviewed structure based and ligand based virtual screening processes. Molecular dynamics simulation, which has become one of the most influential tool for prediction of the conformation of small molecules and changes in their conformation within the biological target, has also been taken into account. Finally, we discuss the principles and concepts of molecular docking, pharmacophores and other methods used in computer-aided drug design.

Software For Computer-Aided Design Of Control Systems

NASA Technical Reports Server (NTRS)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Hearing aid user guides: suitability for older adults.

PubMed

Caposecco, Andrea; Hickson, Louise; Meyer, Carly

2014-02-01

The aim of this study was to analyse the content, design, and readability of printed hearing aid user guides to determine their suitability for older adults, who are the main users of hearing aids. Hearing aid user guides were assessed using four readability formulae and a standardized tool to assess content and design (SAM - Suitability Assessment of Materials). A sample of 36 hearing aid user guides (four user guides from nine different hearing aid manufacturers) were analysed. Sixty nine percent of user guides were rated 'not suitable' and 31% were rated 'adequate' for their suitability. Many scored poorly for scope, vocabulary, aspects of layout and typography, and learning stimulation and motivation. The mean reading grade level for all user guides was grade 9.6 which is too high for older adults. The content, design, and readability of hearing aid user guides are not optimal for older adults and thus may serve as a barrier to successful hearing aid outcomes for this population.

Family communication about HIV/AIDS and sexual behaviour among senior secondary school students in Accra, Ghana.

PubMed

Adu-Mireku, Samuel

2003-04-01

Sexually active adolescents in Ghana are increasingly at risk of HIV and other sexually transmitted infections. As a primary agent of socialization, the family can exert a strong influence on adolescent sexual behaviour. Therefore, to aid in the design and implementation of effective prevention programmes, it is important to understand the role of the family in influencing sexual behaviour among school-going adolescents. To evaluate the relationship between family communications about HIV/AIDS and sexual activity and condom use among school-going adolescents in Accra, Ghana. A sample of 894 students (56.9% girls, 43.1% boys; mean age = 17.4 years, SD = 1.40) at two senior secondary schools in Accra completed a modified version of the Youth Risk Behavior Survey (YRBS) questionnaire, a self-administered instrument developed by the Centers for Disease Control and Prevention. Analytical techniques utilized included logistic regression and chi-square. Twenty-five percent of the participants reported being sexually experienced, and 73.6% had talked about HIV/AIDS with parents or other family members. Of the sexually experienced students, 64.7% initiated first sexual intercourse by age 16; and 55.7% did not use a condom at last sexual intercourse. Bivariate analysis showed significant gender differences in sexual activity, condom use, and family communication about HIV/AIDS. Logistic regression analysis showed that student-family communication about HIV/AIDS was not associated with sexual activity. However, communication about HIV/AIDS between students and parents or other family members increased the odds of using a condom at last sexual intercourse. The findings of this study suggest that prevention programmes that seek to educate Ghanaian school-going adolescents about sexual risk behaviour must strongly encourage communication about HIV/AIDS between students and family members.

Development of a CAD Model Simplification Framework for Finite Element Analysis

DTIC Science & Technology

2012-01-01

A. Senthil Kumar , and KH Lee. Automatic solid decomposition and reduction for non-manifold geometric model generation. Computer-Aided Design, 36(13...CAD/CAM: concepts, techniques, and applications. Wiley-interscience, 1995. [38] Avneesh Sud, Mark Foskey, and Dinesh Manocha. Homotopy-preserving

A Survey of Research Methods to Study Design

DTIC Science & Technology

1989-06-01

Integrated Computer-Aided Manufacturing (ICAM) Definition Languages (IDEFO, IDEF 1, and IDEF 2) Nijssen’s Information Analysis Method (NIAM) * Michael ... Jackson Diagrams 1I-1 • Warnier-Orr Di.grams Hierarchical Input Process Output (HIPO) charts * Nassi Schneiderman Charts. These techniques were intended

Energy Monitoring and Targeting as diagnosis; Applying work analysis to adapt a statistical change detection strategy using representation aiding

NASA Astrophysics Data System (ADS)

Hilliard, Antony

Energy Monitoring and Targeting is a well-established business process that develops information about utility energy consumption in a business or institution. While M&T has persisted as a worthwhile energy conservation support activity, it has not been widely adopted. This dissertation explains M&T challenges in terms of diagnosing and controlling energy consumption, informed by a naturalistic field study of M&T work. A Cognitive Work Analysis of M&T identifies structures that diagnosis can search, information flows un-supported in canonical support tools, and opportunities to extend the most popular tool for MM&T: Cumulative Sum of Residuals (CUSUM) charts. A design application outlines how CUSUM charts were augmented with a more contemporary statistical change detection strategy, Recursive Parameter Estimates, modified to better suit the M&T task using Representation Aiding principles. The design was experimentally evaluated in a controlled M&T synthetic task, and was shown to significantly improve diagnosis performance.

Research and analysis of head-directed area-of-interest visual system concepts

NASA Technical Reports Server (NTRS)

Sinacori, J. B.

1983-01-01

An analysis and survey with conjecture supporting a preliminary data base design is presented. The data base is intended for use in a Computer Image Generator visual subsystem for a rotorcraft flight simulator that is used for rotorcraft systems development, not training. The approach taken was to attempt to identify the visual perception strategies used during terrain flight, survey environmental and image generation factors, and meld these into a preliminary data base design. This design is directed at Data Base developers, and hopefully will stimulate and aid their efforts to evolve such a Base that will support simulation of terrain flight operations.

A Health Insurance Portability and Accountability Act–Compliant Ocular Telehealth Network for the Remote Diagnosis and Management of Diabetic Retinopathy

PubMed Central

Li, Yaqin; Karnowski, Thomas P.; Tobin, Kenneth W.; Giancardo, Luca; Morris, Scott; Sparrow, Sylvia E.; Garg, Seema; Fox, Karen

2011-01-01

Abstract In this article, we present the design and implementation of a regional ocular telehealth network for remote assessment and management of diabetic retinopathy (DR), including the design requirements, network topology, protocol design, system work flow, graphics user interfaces, and performance evaluation. The Telemedical Retinal Image Analysis and Diagnosis Network is a computer-aided, image analysis telehealth paradigm for the diagnosis of DR and other retinal diseases using fundus images acquired from primary care end users delivering care to underserved patient populations in the mid-South and southeastern United States. PMID:21819244

Deep-reasoning fault diagnosis - An aid and a model

NASA Technical Reports Server (NTRS)

Yoon, Wan Chul; Hammer, John M.

1988-01-01

The design and evaluation are presented for the knowledge-based assistance of a human operator who must diagnose a novel fault in a dynamic, physical system. A computer aid based on a qualitative model of the system was built to help the operators overcome some of their cognitive limitations. This aid differs from most expert systems in that it operates at several levels of interaction that are believed to be more suitable for deep reasoning. Four aiding approaches, each of which provided unique information to the operator, were evaluated. The aiding features were designed to help the human's casual reasoning about the system in predicting normal system behavior (N aiding), integrating observations into actual system behavior (O aiding), finding discrepancies between the two (O-N aiding), or finding discrepancies between observed behavior and hypothetical behavior (O-HN aiding). Human diagnostic performance was found to improve by almost a factor of two with O aiding and O-N aiding.

Development of a special-purpose test surface guided by uncertainty analysis - Introduction of a new uncertainty analysis step

NASA Technical Reports Server (NTRS)

Wang, T.; Simon, T. W.

1988-01-01

Development of a recent experimental program to investigate the effects of streamwise curvature on boundary layer transition required making a bendable, heated and instrumented test wall, a rather nonconventional surface. The present paper describes this surface, the design choices made in its development and how uncertainty analysis was used, beginning early in the test program, to make such design choices. Published uncertainty analysis techniques were found to be of great value; but, it became clear that another step, one herein called the pre-test analysis, would aid the program development. Finally, it is shown how the uncertainty analysis was used to determine whether the test surface was qualified for service.

Recipe for Success: Digital Viewables

NASA Technical Reports Server (NTRS)

LaPha, Steven; Gaydos, Frank

2014-01-01

The Engineering Services Contract (ESC) and Information Management Communication Support contract (IMCS) at Kennedy Space Center (KSC) provide services to NASA in respect to flight and ground systems design and development. These groups provides the necessary tools, aid, and best practice methodologies required for efficient, optimized design and process development. The team is responsible for configuring and implementing systems, software, along with training, documentation, and administering standards. The team supports over 200 engineers and design specialists with the use of Windchill, Creo Parametric, NX, AutoCAD, and a variety of other design and analysis tools.

Volume accumulator design analysis computer codes

NASA Technical Reports Server (NTRS)

Whitaker, W. D.; Shimazaki, T. T.

1973-01-01

The computer codes, VANEP and VANES, were written and used to aid in the design and performance calculation of the volume accumulator units (VAU) for the 5-kwe reactor thermoelectric system. VANEP computes the VAU design which meets the primary coolant loop VAU volume and pressure performance requirements. VANES computes the performance of the VAU design, determined from the VANEP code, at the conditions of the secondary coolant loop. The codes can also compute the performance characteristics of the VAU's under conditions of possible modes of failure which still permit continued system operation.

Employment Opportunities for the Handicapped in Programmable Automation.

ERIC Educational Resources Information Center

Swift, Richard; Leneway, Robert

A Computer Integrated Manufacturing System may make it possible for severely disabled people to custom design, machine, and manufacture either wood or metal parts. Programmable automation merges computer aided design, computer aided manufacturing, computer aided engineering, and computer integrated manufacturing systems with automated production…

Overview of SDCM - The Spacecraft Design and Cost Model

NASA Technical Reports Server (NTRS)

Ferebee, Melvin J.; Farmer, Jeffery T.; Andersen, Gregory C.; Flamm, Jeffery D.; Badi, Deborah M.

1988-01-01

The Spacecraft Design and Cost Model (SDCM) is a computer-aided design and analysis tool for synthesizing spacecraft configurations, integrating their subsystems, and generating information concerning on-orbit servicing and costs. SDCM uses a bottom-up method in which the cost and performance parameters for subsystem components are first calculated; the model then sums the contributions from individual components in order to obtain an estimate of sizes and costs for each candidate configuration within a selected spacecraft system. An optimum spacraft configuration can then be selected.

A statistical package for computing time and frequency domain analysis

NASA Technical Reports Server (NTRS)

Brownlow, J.

1978-01-01

The spectrum analysis (SPA) program is a general purpose digital computer program designed to aid in data analysis. The program does time and frequency domain statistical analyses as well as some preanalysis data preparation. The capabilities of the SPA program include linear trend removal and/or digital filtering of data, plotting and/or listing of both filtered and unfiltered data, time domain statistical characterization of data, and frequency domain statistical characterization of data.

Effect of Premolar Axial Wall Height on Computer-Aided Design/Computer-Assisted Manufacture Crown Retention.

PubMed

Martin, Curt; Harris, Ashley; DuVall, Nicholas; Wajdowicz, Michael; Roberts, Howard Wayne

2018-03-28

To evaluate the effect of premolar axial wall height on the retention of adhesive, full-coverage, computer-aided design/computer-assisted manufacture (CAD/CAM) restorations. A total of 48 premolar teeth randomized into four groups (n = 12 per group) received all-ceramic CAD/CAM restorations with axial wall heights (AWH) of 3, 2, 1, and 0 mm and 16-degree total occlusal convergence (TOC). Specimens were restored with lithium disilicate material and cemented with self-adhesive resin cement. Specimens were loaded to failure after 24 hours. The 3- and 2-mm AWH specimens demonstrated significantly greater failure load. Failure analysis suggests a 2-mm minimum AWH for premolars with a TOC of 16 degrees. Adhesive technology may compensate for compromised AWH.

Modelling, simulation and computer-aided design (CAD) of gyrotrons for novel applications in the high-power terahertz science and technologies

NASA Astrophysics Data System (ADS)

Sabchevski, S.; Idehara, T.; Damyanova, M.; Zhelyazkov, I.; Balabanova, E.; Vasileva, E.

2018-03-01

Gyrotrons are the most powerful sources of CW coherent radiation in the sub-THz and THz frequency bands. In recent years, they have demonstrated a remarkable potential for bridging the so-called THz-gap in the electromagnetic spectrum and opened the road to many novel applications of the terahertz waves. Among them are various advanced spectroscopic techniques (e.g., ESR and DNP-NMR), plasma physics and fusion research, materials processing and characterization, imaging and inspection, new medical technologies and biological studies. In this paper, we review briefly the current status of the research in this broad field and present our problem-oriented software packages developed recently for numerical analysis, computer-aided design (CAD) and optimization of gyrotrons.

Designing Glass Panels for Economy and Reliability

NASA Technical Reports Server (NTRS)

Moore, D. M.

1983-01-01

Analytical method determines probability of failure of rectangular glass plates subjected to uniformly distributed loads such as those from wind, earthquake, snow, and deadweight. Developed as aid in design of protective glass covers for solar-cell arrays and solar collectors, method is also useful in estimating the reliability of large windows in buildings exposed to high winds and is adapted to nonlinear stress analysis of simply supported plates of any elastic material.

The Design and Development of a Web-Interface for the Software Engineering Automation System

DTIC Science & Technology

2001-09-01

application on the Internet. 14. SUBJECT TERMS Computer Aided Prototyping, Real Time Systems , Java 15. NUMBER OF...difficult. Developing the entire system only to find it does not meet the customer’s needs is a tremendous waste of time. Real - time systems need a...software prototyping is an iterative software development methodology utilized to improve the analysis and design of real - time systems [2]. One

A dc model for power switching transistors suitable for computer-aided design and analysis

NASA Technical Reports Server (NTRS)

Wilson, P. M.; George, R. T., Jr.; Owen, H. A., Jr.; Wilson, T. G.

1979-01-01

The proposed dc model for bipolar junction power switching transistors is based on measurements which may be made with standard laboratory equipment. Those nonlinearities which are of importance to power electronics design are emphasized. Measurements procedures are discussed in detail. A model formulation adapted for use with a computer program is presented, and a comparison between actual and computer-generated results is made.

Civil and mechanical engineering applications of sensitivity analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komkov, V.

1985-07-01

In this largely tutorial presentation, the historical development of optimization theories has been outlined as they applied to mechanical and civil engineering designs and the development of modern sensitivity techniques during the last 20 years has been traced. Some of the difficulties and the progress made in overcoming them have been outlined. Some of the recently developed theoretical methods have been stressed to indicate their importance to computer-aided design technology.

Computing Equilibrium Chemical Compositions

NASA Technical Reports Server (NTRS)

Mcbride, Bonnie J.; Gordon, Sanford

1995-01-01

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

Surficial geologic map of the Germantown quadrangle, Shelby County, Tennessee

USGS Publications Warehouse

Arsdale, Roy Van

2004-01-01

The depiction of geology on this map is designed to aid in urban planning and analysis of potential damage in the event of strong earthquake motion. The geologic map by itself does not analyze potential earthquake damage, but is designed to be used by seismologists who perform such analyses. The nature of geologic materials to a degree determines the severity of damage to infrastructure sustained during a strong earthquake.

Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

NASA Astrophysics Data System (ADS)

das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

2014-08-01

The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

An Analysis of Item Identification for Additive Manufacturing (3-D Printing) Within the Naval Supply Chain

DTIC Science & Technology

2014-12-01

manufacturing BPA blanket purchase agreement BMW Bavarian Motor Works CAD computer-aided design CASREP casualty report CDSA Combat Direction...agreements ( BPA ), and through existing indefinite delivery and indefinite quantity (IDIQ) contracts. These types of procurement methods have less visibility

Self-efficacy of first aid for home accidents among parents with 0- to 4-year-old children at a metropolitan community health center in Taiwan.

PubMed

Wei, Yu-Li; Chen, Li-Li; Li, Tsai-Chung; Ma, Wei-Fen; Peng, Niang-Huei; Huang, Li-Chi

2013-03-01

Although accidental injury is the main factor involved in the death of young children in many countries, few studies have focused on parents' competence with regard to self-efficacy of first aid for their children following injuries occurring at home. The purpose of this cross-sectional study was to investigate parental self-sufficiency of first aid for home accidents in children aged 0-4 years. The study is a cross-sectional designed. Data from 445 parents recruited were collected by purposive sampling at eight metropolitan community health centers in central Taiwan. Measurements were taken from a self-developed questionnaire that included 37 questions. Logistic regression analysis was applied to explore the associations between factors and parents' self-efficacy of first aid at home accident. Our findings show that parents' overall rate of knowledge of first aid was 72%. The mean score for 100% certainty in parents' self-efficacy of first aid was 26.6%. The lowest scores for self-efficacy were with regard to choking and cardiopulmonary resuscitation (CPR). There was a significantly positive correlation between parents' knowledge and self-efficacy of first aid (p<0.01), and thus knowledge of first aid is a predictor of parents' self-efficacy. Knowledge of first aid is also a partly mediator between participants' attending first aid program, participants' first aid information obtained from health personnel and self-efficacy of first aid. Our findings suggest that medical services should provide first aid resources to help manage accidental injuries involving children, particularly information on how to deal with choking and CPR. With an appropriate program provided by health professionals, parents' self-efficacy of first aid for home accidents will be positively enhanced. Copyright © 2013. Published by Elsevier Ltd.

Situational analysis of communication of HIV and AIDS information to persons with visual impairment: a case of Kang'onga Production Centre in Ndola, Zambia.

PubMed

Chintende, Grace Nsangwe; Sitali, Doreen; Michelo, Charles; Mweemba, Oliver

2017-04-04

Despite the increases in health promotion and educational programs on HIV and AIDS, lack of information and communication on HIV and AIDS for the visually impaired persons continues. The underlying factors that create the information and communication gaps have not been fully explored in Zambia. It is therefore important that, this situational analysis on HIV and AIDS information dissemination to persons with visual impairments at Kang'onga Production Centre in Ndola was conducted. The study commenced in December 2014 to May 2015. A qualitative case study design was employed. The study used two focus group discussions with males and females. Each group comprised twelve participants. Eight in-depth interviews involving the visually impaired persons and five key informants working with visually impaired persons were conducted. Data was analysed thematically using NVIVO 8 software. Ethical clearance was sought from Excellency in Research Ethics and Science. Reference Number 2014-May-030. It was established that most visually impaired people lacked knowledge on the cause, transmission and treatment of HIV and AIDS resulting in misconceptions. It was revealed that health promoters and people working with the visually impaired did not have specific HIV and AIDS information programs in Zambia. Further, it was discovered that the media, information education communication and health education were channels through which the visually impaired accessed HIV and AIDS information. Discrimination, stigma, lack of employment opportunities, funding and poverty were among the many challenges identified which the visually impaired persons faced in accessing HIV and AIDS information. Integration of the visually impaired in HIV and AIDS programs would increase funding for economic empowerment and health promotions in order to improve communication on HIV and AIDS information. The study showed that, the visually impaired persons in Zambia are not catered for in the dissemination of HIV and AIDS information. Available information is not user-friendly because it is in unreadable formats thereby increasing the potential for misinformation and limitations to their access. This calls for innovations in the communication on HIV and AIDS information health promotion to the target groups.

Systems design and comparative analysis of large antenna concepts

NASA Technical Reports Server (NTRS)

Garrett, L. B.; Ferebee, M. J., Jr.

1983-01-01

Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

A Method to Develop Neck Injury Criteria to Aid Design and Test of Escape Systems Incorporating Helmet Mounted Displays

DTIC Science & Technology

2014-09-01

The military aviation community began designing and building ejection seats for high speed aircraft after World War II. As pilot safety became...AFIT-ENV-DS-14-S-22 A METHOD TO DEVELOP NECK INJURY CRITERIA TO AID DESIGN AND TEST OF ESCAPE SYSTEMS...protection in the United States. AFIT-ENV-DS-14-S-22 A METHOD TO DEVELOP NECK INJURY CRITERIA TO AID DESIGN AND TEST OF ESCAPE SYSTEMS

Computer aided analysis and optimization of mechanical system dynamics

NASA Technical Reports Server (NTRS)

Haug, E. J.

1984-01-01

The purpose is to outline a computational approach to spatial dynamics of mechanical systems that substantially enlarges the scope of consideration to include flexible bodies, feedback control, hydraulics, and related interdisciplinary effects. Design sensitivity analysis and optimization is the ultimate goal. The approach to computer generation and solution of the system dynamic equations and graphical methods for creating animations as output is outlined.

Computer-Aided Design/Manufacturing (CAD/M) for High-Speed Interconnect.

DTIC Science & Technology

1981-10-01

are frequency sensitive and hence lend themselves to frequency domain ananlysis . Most of the classical microwave analysis is handled in the frequency ...capability integrated into a time-domain analysis program. This approach allows determination of frequency -dependent transmission line (interconnect...the items to consider in any interconnect study is that of the frequency range of interest. This determines whether the interconnections must be treated

Technology for Analysis of Student Interactions With Complex Programs. Final Report for Period January 1972-February 1973.

ERIC Educational Resources Information Center

Lukas, George; Feurzeig, Wallace

A description is provided of a computer system designed to aid in the analysis of student programing work. The first section of the report consists of an overview and user's guide. In it, the system input is described in terms of a "dribble file" which records all student inputs generated; also an introduction is given to the aids…

Do choosing wisely tools meet criteria for patient decision aids? A descriptive analysis of patient materials

PubMed Central

Légaré, France; Hébert, Jessica; Goh, Larissa; Lewis, Krystina B; Leiva Portocarrero, Maria Ester; Robitaille, Hubert; Stacey, Dawn

2016-01-01

Objectives Choosing Wisely is a remarkable physician-led campaign to reduce unnecessary or harmful health services. Some of the literature identifies Choosing Wisely as a shared decision-making approach. We evaluated the patient materials developed by Choosing Wisely Canada to determine whether they meet the criteria for shared decision-making tools known as patient decision aids. Design Descriptive analysis of all Choosing Wisely Canada patient materials. Data source In May 2015, we selected all Choosing Wisely Canada patient materials from its official website. Main outcomes and measures Four team members independently extracted characteristics of the English materials using the International Patient Decision Aid Standards (IPDAS) modified 16-item minimum criteria for qualifying and certifying patient decision aids. The research team discussed discrepancies between data extractors and reached a consensus. Descriptive analysis was conducted. Results Of the 24 patient materials assessed, 12 were about treatments, 11 were about screening and 1 was about prevention. The median score for patient materials using IPDAS criteria was 10/16 (range: 8–11) for screening topics and 6/12 (range: 6–9) for prevention and treatment topics. Commonly missed criteria were stating the decision (21/24 did not), providing balanced information on option benefits/harms (24/24 did not), citing evidence (24/24 did not) and updating policy (24/24 did not). Out of 24 patient materials, only 2 met the 6 IPDAS criteria to qualify as patient decision aids, and neither of these 2 met the 6 certifying criteria. Conclusions Patient materials developed by Choosing Wisely Canada do not meet the IPDAS minimal qualifying or certifying criteria for patient decision aids. Modifications to the Choosing Wisely Canada patient materials would help to ensure that they qualify as patient decision aids and thus as more effective shared decision-making tools. PMID:27566638

Scientific and regulatory challenges in evaluating clinical trial protocols for HIV-1/AIDS vaccines - A review from a regulatory perspective.

PubMed

Sheets, Rebecca L; Zhou, TieQun; Knezevic, Ivana

2016-03-01

Clinical development of prophylactic HIV/AIDS vaccines presents many scientific challenges that result in challenges for regulators reviewing clinical trial applications (CTAs). The World Health Organization (WHO) has the responsibility to provide technical support to these regulators. The search for an HIV/AIDS vaccine will only succeed through well-designed, -conducted and -controlled human efficacy studies reviewed and approved by regulators in countries worldwide, particularly in countries where the epidemic has hit hardest, such as in sub-Saharan Africa and Asia. This review summarizes the current candidates in development and focuses on challenges regulators face when reviewing CTAs, such as the evolving landscape of "standard of prevention," trials in adolescents, adaptive trial designs, correlates of protection and their analysis, and access to successful vaccines. There are many unknowns in the field of HIV/AIDS vaccine development and often, there is not a clear right or wrong approach because of the scientific challenges described in this review. Consequently, regulators should not feel that decisions need be made in isolation, when there are many available international collaborative efforts and opportunities to seek expert advice. The WHO provides many such opportunities and support to regulators across the globe. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

[Comparative evaluation of the marginal accuracy of single crowns fabricated computer using aided design/computer aided manufacturing methods, self-curing resin and Luxatemp].

PubMed

Jianming, Yuan; Ying, Tang; Feng, Pan; Weixing, Xu

2016-12-01

This study aims to compare the marginal accuracy of single crowns fabricated using self-curing resin, Luxatemp, and computer aided design/computer aided manufacturing (CAD/CAM) methods in clinical application. A total of 30 working dies, which were obtained from 30 clinical teeth prepared with full crown as standard, were created and made into 30 self-curing resin, Luxatemp, and CAD/CAM single crowns. The restorations were seated on the working dies, and stereomicroscope was used to observe and measure the thickness of reference points. One-way analysis of variance, which was performed using SPSS 19.0 software package, compared the marginal gap widths of self-curing resin, Luxatemp, and CAD/CAM provisional crowns. The mean marginal gap widths of the fabricated self-curing resin, Luxatemp, and CAD/CAM were (179.06±33.24), (88.83±9.56), and (43.61±7.27) μm, respectively. A significant difference was observed among the three provisional crowns (P<0.05). The marginal gap width of CAD/CAM provisional crown was lower than that of the self-curing resin and Luxatemp. Thus, the CAD/CAM provisional crown offers a better remediation effect in clinical application.

A review of health behaviour theories: how useful are these for developing interventions to promote long-term medication adherence for TB and HIV/AIDS?

PubMed Central

Munro, Salla; Lewin, Simon; Swart, Tanya; Volmink, Jimmy

2007-01-01

Background Suboptimal treatment adherence remains a barrier to the control of many infectious diseases, including tuberculosis and HIV/AIDS, which contribute significantly to the global disease burden. However, few of the many interventions developed to address this issue explicitly draw on theories of health behaviour. Such theories could contribute to the design of more effective interventions to promote treatment adherence and to improving assessments of the transferability of these interventions across different health issues and settings. Methods This paper reviews behaviour change theories applicable to long-term treatment adherence; assesses the evidence for their effectiveness in predicting behaviour change; and examines the implications of these findings for developing strategies to improve TB and HIV/AIDS medication adherence. We searched a number of electronic databases for theories of behaviour change. Eleven theories were examined. Results Little empirical evidence was located on the effectiveness of these theories in promoting adherence. However, several models have the potential to both improve understanding of adherence behaviours and contribute to the design of more effective interventions to promote adherence to TB and HIV/AIDS medication. Conclusion Further research and analysis is needed urgently to determine which models might best improve adherence to long-term treatment regimens. PMID:17561997

Computer Aided Design in Engineering Education.

ERIC Educational Resources Information Center

Gobin, R.

1986-01-01

Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

Generating Alternative Proposals for the Louvre Using Procedural Modeling

NASA Astrophysics Data System (ADS)

Calogero, E.; Arnold, D.

2011-09-01

This paper presents the process of reconstructing two facade designs for the East wing of the Louvre using procedural modeling. The first proposal reconstructed is Louis Le Vau's 1662 scheme and the second is the 1668 design of the "petit conseil" that still stands today. The initial results presented show how such reconstructions may aid general and expert understanding of the two designs. It is claimed that by formalizing the facade description into a shape grammar in CityEngine, a systematized approach to a stylistic analysis is possible. It is also asserted that such an analysis is still best understood in the historical context of what is known about the contemporary design intentions of the building creators and commissioners.

[Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

PubMed

Yu, Q

2018-04-09

Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

The impact of self-efficacy, expectations, and readiness on hearing aid outcomes.

PubMed

Ferguson, Melanie A; Woolley, Annie; Munro, Kevin J

2016-07-01

To examine the impact of self-efficacy and expectations for hearing aids, and readiness to improve hearing, on hearing aid outcome measures in first-time adult hearing aid users Design: A prospective, single centre design. Predictor variables measured at the hearing assessment included measures of self-efficacy, expectations and readiness to improve hearing. Outcome measures obtained at six-week follow-up were the Glasgow Hearing Aid Benefit Profile and Satisfaction with Amplification in Daily Life. A sample of 30 first-time adult hearing aid users were recruited through a public-sector funded audiology clinic. When measured prior to hearing aid fitting, self-efficacy for hearing aids predicted satisfaction with hearing aids but was not related to other hearing aid outcomes. Expectations of hearing aids, in particular positive expectations, and readiness to improve hearing predicted outcomes for hearing aid satisfaction and benefit, although not hearing aid use. Hearing sensitivity was not correlated with hearing aid outcomes. These results suggest that assessment of expectations of hearing aids, and readiness to improve hearing, may be useful to help identify individuals attending audiology clinics who would most likely benefit from hearing aid provision.

14 CFR 152.607 - Building design requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Building design requirements. 152.607... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.607 Building design... or major building modification project proposed at the airport. The building design, construction...

Automotive technicians' training as a community-of-practice: implications for the design of an augmented reality teaching aid.

PubMed

Anastassova, Margarita; Burkhardt, Jean-Marie

2009-07-01

The paper presents an ergonomic analysis carried out in the early phases of an R&D project. The purpose was to investigate the functioning of today's Automotive Service Technicians (ASTs) training in order to inform the design of an Augmented Reality (AR) teaching aid. The first part of the paper presents a literature review of some major problems encountered by ASTs today. The benefits of AR as technological aid are also introduced. Then, the methodology and the results of two case studies are presented. The first study is based on interviews with trainers and trainees; the second one on observations in real training settings. The results support the assumption that today's ASTs' training could be regarded as a community-of-practice (CoP). Therefore, AR could be useful as a collaboration tool, offering a shared virtual representation of real vehicle's parts, which are normally invisible unless dismantled (e.g. the parts of a hydraulic automatic transmission). We conclude on the methods and the technologies to support the automotive CoP.

A Meta-Evaluation of Nutrition Education Intervention Research among Pregnant Women.

ERIC Educational Resources Information Center

Boyd, Neal Richard, Jr.; Windsor, Richard A.

1993-01-01

Meta-analysis of five studies advocating nutrition education for pregnant women led to recommendations for research: (1) define nutrition education to aid replication; (2) describe the intervention thoroughly; (3) use experimental designs; (4) collect follow-up data; and (5) describe baseline demographic, behavioral, and health characteristics of…

78 FR 13673 - HTC America, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... modifying various pre-installed applications and components in order to differentiate its products from.... As the customized applications and components are pre-installed on the device, consumers do not... together, failed to provide reasonable and appropriate security in the design and customization of software...

MPAI (mass probes aided ionization) method for total analysis of biomolecules by mass spectrometry.

PubMed

Honda, Aki; Hayashi, Shinichiro; Hifumi, Hiroki; Honma, Yuya; Tanji, Noriyuki; Iwasawa, Naoko; Suzuki, Yoshio; Suzuki, Koji

2007-01-01

We have designed and synthesized various mass probes, which enable us to effectively ionize various molecules to be detected with mass spectrometry. We call the ionization method using mass probes the "MPAI (mass probes aided ionization)" method. We aim at the sensitive detection of various biological molecules, and also the detection of bio-molecules by a single mass spectrometry serially without changing the mechanical settings. Here, we review mass probes for small molecules with various functional groups and mass probes for proteins. Further, we introduce newly developed mass probes for proteins for highly sensitive detection.

“I’m Not Going to Die from the AIDS”: Resilience in Aging with HIV Disease

PubMed Central

Emlet, Charles A.; Tozay, Shakima; Raveis, Victoria H.

2011-01-01

Purpose: Adults aging with HIV/AIDS can experience resilience in spite of the deleterious affects of the disease. This study seeks to examine the lived experiences of older adults with HIV/AIDS as it relates to strengths and resilience in dealing with this devastating disease. Design and methods: Semistructured in-depth interviews were conducted with 25 adults, 50 years and older, living with HIV/AIDS. The interview transcripts were analyzed using constant comparative methodology following the tenets of adaptive theory. Results: The majority of informants expressed experiences of resilience and strengths as related to living with HIV/AIDS. Seven major themes emerged from the analysis including self-acceptance, optimism, will to live, generativity, self-management, relational living, and independence. Implications: The research identified the importance of strengths and resilience among older adults living with HIV/AIDS. Further research is needed to explore these phenomena with larger samples. Practitioners should identify and implement methods for assessing resilience among older HIV-infected adults. PMID:20650948

Full 3D visualization tool-kit for Monte Carlo and deterministic transport codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frambati, S.; Frignani, M.

2012-07-01

We propose a package of tools capable of translating the geometric inputs and outputs of many Monte Carlo and deterministic radiation transport codes into open source file formats. These tools are aimed at bridging the gap between trusted, widely-used radiation analysis codes and very powerful, more recent and commonly used visualization software, thus supporting the design process and helping with shielding optimization. Three main lines of development were followed: mesh-based analysis of Monte Carlo codes, mesh-based analysis of deterministic codes and Monte Carlo surface meshing. The developed kit is considered a powerful and cost-effective tool in the computer-aided design formore » radiation transport code users of the nuclear world, and in particular in the fields of core design and radiation analysis. (authors)« less

Preliminary study of acoustic analysis for evaluating speech-aid oral prostheses: Characteristic dips in octave spectrum for comparison of nasality.

PubMed

Chang, Yen-Liang; Hung, Chao-Ho; Chen, Po-Yueh; Chen, Wei-Chang; Hung, Shih-Han

2015-10-01

Acoustic analysis is often used in speech evaluation but seldom for the evaluation of oral prostheses designed for reconstruction of surgical defect. This study aimed to introduce the application of acoustic analysis for patients with velopharyngeal insufficiency (VPI) due to oral surgery and rehabilitated with oral speech-aid prostheses. The pre- and postprosthetic rehabilitation acoustic features of sustained vowel sounds from two patients with VPI were analyzed and compared with the acoustic analysis software Praat. There were significant differences in the octave spectrum of sustained vowel speech sound between the pre- and postprosthetic rehabilitation. Acoustic measurements of sustained vowels for patients before and after prosthetic treatment showed no significant differences for all parameters of fundamental frequency, jitter, shimmer, noise-to-harmonics ratio, formant frequency, F1 bandwidth, and band energy difference. The decrease in objective nasality perceptions correlated very well with the decrease in dips of the spectra for the male patient with a higher speech bulb height. Acoustic analysis may be a potential technique for evaluating the functions of oral speech-aid prostheses, which eliminates dysfunctions due to the surgical defect and contributes to a high percentage of intelligible speech. Octave spectrum analysis may also be a valuable tool for detecting changes in nasality characteristics of the voice during prosthetic treatment of VPI. Copyright © 2014. Published by Elsevier B.V.

Study Guide for First Aid Practices.

ERIC Educational Resources Information Center

Thygerson, Alton L.

This study guide is designed to accompany the American National Red Cross texts ADVANCED FIRST AID AND EMERGENCY CARE and STANDARD FIRST AID AND PERSONAL SAFETY. Part one serves as an introduction to first aid. The legal aspects of first aid are discussed along with a list of suggested first aid kit contents, and information on first aid books is…

A Cognitive-System Model for En Route Air Traffic Management

NASA Technical Reports Server (NTRS)

Corker, Kevin M.; Pisanich, Gregory; Lebacqz, J. Victor (Technical Monitor)

1998-01-01

NASA Ames Research Center has been engaged in the development of advanced air traffic management technologies whose basic form is cognitive aiding systems for air traffic controller and flight deck operations. In the design and evaluation of such systems the dynamic interaction between the airborne aiding system and the ground-based aiding systems forms a critical coupling for control. The human operator is an integral control element in the system and the optimal integration of human decision and performance parameters with those of the automation aiding systems offers a significant challenge to cognitive engineering. This paper presents a study in full mission simulation and the development of a predictive computational model of human performance. We have found that this combination of methodologies provide a powerful design-aiding process. We have extended the computational model Man Machine Integrated Design and Analysis System (N13DAS) to include representation of multiple cognitive agents (both human operators and intelligent aiding systems), operating aircraft airline operations centers and air traffic control centers in the evolving airspace. The demands of this application require the representation of many intelligent agents sharing world-models, and coordinating action/intention with cooperative scheduling of goals and actions in a potentially unpredictable world of operations. The operator's activity structures have been developed to include prioritization and interruption of multiple parallel activities among multiple operators, to provide for anticipation (knowledge of the intention and action of remote operators), and to respond to failures of the system and other operators in the system in situation-specific paradigms. We have exercised this model in a multi-air traffic sector scenario with potential conflict among aircraft at and across sector boundaries. We have modeled the control situation as a multiple closed loop system. The inner and outer loop alerting structure of air traffic management has many implications that need to be investigated to assure adequate design. First, there are control and stability factors implicit in the design. As the inner loop response time approaches that of the outer loop, system stability may be compromised in that controllers may be solving a problem the nature of which has already been changed by pilot action. Second, information exchange and information presentation for both air and ground must be designed to complement as opposed to compete with each other. Third, the level of individual and shared awareness in trajectory modification and flight conformance needs to be defined. Fourth, the level of required awareness and performance impact of mixed fleet operations and failed-mode recovery must be explored.

Sensitivity analysis as an aid in modelling and control of (poorly-defined) ecological systems. [closed ecological systems

NASA Technical Reports Server (NTRS)

Hornberger, G. M.; Rastetter, E. B.

1982-01-01

A literature review of the use of sensitivity analyses in modelling nonlinear, ill-defined systems, such as ecological interactions is presented. Discussions of previous work, and a proposed scheme for generalized sensitivity analysis applicable to ill-defined systems are included. This scheme considers classes of mathematical models, problem-defining behavior, analysis procedures (especially the use of Monte-Carlo methods), sensitivity ranking of parameters, and extension to control system design.

Space system operations and support cost analysis using Markov chains

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.; Moore, Arlene A.; Fairbairn, Robert E.

1990-01-01

This paper evaluates the use of Markov chain process in probabilistic life cycle cost analysis and suggests further uses of the process as a design aid tool. A methodology is developed for estimating operations and support cost and expected life for reusable space transportation systems. Application of the methodology is demonstrated for the case of a hypothetical space transportation vehicle. A sensitivity analysis is carried out to explore the effects of uncertainty in key model inputs.

Perception of Hearing Aid-Processed Speech in Individuals with Late-Onset Auditory Neuropathy Spectrum Disorder.

PubMed

Mathai, Jijo Pottackal; Appu, Sabarish

2015-01-01

Auditory neuropathy spectrum disorder (ANSD) is a form of sensorineural hearing loss, causing severe deficits in speech perception. The perceptual problems of individuals with ANSD were attributed to their temporal processing impairment rather than to reduced audibility. This rendered their rehabilitation difficult using hearing aids. Although hearing aids can restore audibility, compression circuits in a hearing aid might distort the temporal modulations of speech, causing poor aided performance. Therefore, hearing aid settings that preserve the temporal modulations of speech might be an effective way to improve speech perception in ANSD. The purpose of the study was to investigate the perception of hearing aid-processed speech in individuals with late-onset ANSD. A repeated measures design was used to study the effect of various compression time settings on speech perception and perceived quality. Seventeen individuals with late-onset ANSD within the age range of 20-35 yr participated in the study. The word recognition scores (WRSs) and quality judgment of phonemically balanced words, processed using four different compression settings of a hearing aid (slow, medium, fast, and linear), were evaluated. The modulation spectra of hearing aid-processed stimuli were estimated to probe the effect of amplification on the temporal envelope of speech. Repeated measures analysis of variance and post hoc Bonferroni's pairwise comparisons were used to analyze the word recognition performance and quality judgment. The comparison between unprocessed and all four hearing aid-processed stimuli showed significantly higher perception using the former stimuli. Even though perception of words processed using slow compression time settings of the hearing aids were significantly higher than the fast one, their difference was only 4%. In addition, there were no significant differences in perception between any other hearing aid-processed stimuli. Analysis of the temporal envelope of hearing aid-processed stimuli revealed minimal changes in the temporal envelope across the four hearing aid settings. In terms of quality, the highest number of individuals preferred stimuli processed using slow compression time settings. Individuals who preferred medium ones followed this. However, none of the individuals preferred fast compression time settings. Analysis of quality judgment showed that slow, medium, and linear settings presented significantly higher preference scores than the fast compression setting. Individuals with ANSD showed no marked difference in perception of speech that was processed using the four different hearing aid settings. However, significantly higher preference, in terms of quality, was found for stimuli processed using slow, medium, and linear settings over the fast one. Therefore, whenever hearing aids are recommended for ANSD, those having slow compression time settings or linear amplification may be chosen over the fast (syllabic compression) one. In addition, WRSs obtained using hearing aid-processed stimuli were remarkably poorer than unprocessed stimuli. This shows that processing of speech through hearing aids might have caused a large reduction of performance in individuals with ANSD. However, further evaluation is needed using individually programmed hearing aids rather than hearing aid-processed stimuli. American Academy of Audiology.

Experiments to evolve toward a tangible user interface for computer-aided design parts assembly

NASA Astrophysics Data System (ADS)

Legardeur, Jeremy; Garreau, Ludovic; Couture, Nadine

2004-05-01

In this paper, we present the concepts of the ESKUA (Experimentation of a Kinesics System Usable for Assembly) platform that allows designers to carry out the assembly of mechanical CAD (Computer Aided Design) parts. This platform, based on tangible user interface lead taking into account assembly constraints from the beginning of the design phase and especially during the phase of CAD models manipulation. Our goal is to propose a working environment where the designer is confronted with real assembly constraints which are currently masked by existing CAD software functionalities. Thus, the platform is based on the handling of physical objects, called tangible interactors, which enable having a physical perception of the assembly constraints. In this goal, we have defined a typology of interactors based on concepts proposed in Design For Assembly methods. We present here the results of studies that led to the evolution of this first interactors set. One is concerning an experiment to evaluate the cognitive aspects of the use of interactors. The other is about an analysis of existing mechanical product and fasteners. We will show how these studies lead to the evolution of the interactors based on the functional surfaces use.

Utilising three-dimensional printing techniques when providing unique assistive devices: A case report.

PubMed

Day, Sarah Jane; Riley, Shaun Patrick

2018-02-01

The evolution of three-dimensional printing into prosthetics has opened conversations about the availability and cost of prostheses. This report will discuss how a prosthetic team incorporated additive manufacture techniques into the treatment of a patient with a partial hand amputation to create and test a unique assistive device which he could use to hold his French horn. Case description and methods: Using a process of shape capture, photogrammetry, computer-aided design and finite element analysis, a suitable assistive device was designed and tested. The design was fabricated using three-dimensional printing. Patient satisfaction was measured using a Pugh's Matrix™, and a cost comparison was made between the process used and traditional manufacturing. Findings and outcomes: Patient satisfaction was high. The three-dimensional printed devices were 56% cheaper to fabricate than a similar laminated device. Computer-aided design and three-dimensional printing proved to be an effective method for designing, testing and fabricating a unique assistive device. Clinical relevance CAD and 3D printing techniques can enable devices to be designed, tested and fabricated cheaper than when using traditional techniques. This may lead to improvements in quality and accessibility.

CMOS output buffer wave shaper

NASA Technical Reports Server (NTRS)

Albertson, L.; Whitaker, S.; Merrell, R.

1990-01-01

As the switching speeds and densities of Digital CMOS integrated circuits continue to increase, output switching noise becomes more of a problem. A design technique which aids in the reduction of switching noise is reported. The output driver stage is analyzed through the use of an equivalent RLC circuit. The results of the analysis are used in the design of an output driver stage. A test circuit based on these techniques is being submitted to MOSIS for fabrication.

Software Tools for Shipbuilding Productivity

DTIC Science & Technology

1984-12-01

shipbuilding, is that design, manufacturing and robotic technology applications to shipbuilding have been proven. all aspects of shipbuilding is now a task...technical information about the process of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) effectively has been a problem of serious and...Design (CAD) 3.4.1 CAD System Components 3.4.2 CAD System Benefits 3.4.3 New and Future CAD Technologies Computer Aided Manufacturing (CAM) 3.5.1 CAM

Silencing women’s sexuality: global AIDS policies and the case of the female condom

PubMed Central

Peters, Anny JTP; van Driel, Francien TM; Jansen, Willy HM

2013-01-01

Introduction The female condom is the only evidence-based AIDS prevention technology that has been designed for the female body; yet, most women do not have access to it. This is remarkable since women constitute the majority of all HIV-positive people living in sub-Saharan Africa, and gender inequality is seen as a driving force of the AIDS epidemic. In this study, we analyze how major actors in the AIDS prevention field frame the AIDS problem, in particular the female condom in comparison to other prevention technologies, in their discourse and policy formulations. Our aim is to gain insight into the discursive power mechanisms that underlie the thinking about AIDS prevention and women’s sexual agency. Methods We analyze the AIDS policies of 16 agencies that constitute the most influential actors in the global response to AIDS. Our study unravels the discursive power of these global AIDS policy actors, when promoting and making choices between AIDS prevention technologies. We conducted both a quantitative and qualitative analysis of how the global AIDS epidemic is being addressed by them, in framing the AIDS problem, labelling of different categories of people for targeting AIDS prevention programmes and in gender marking of AIDS prevention technologies. Results We found that global AIDS policy actors frame the AIDS problem predominantly in the context of gender and reproductive health, rather than that of sexuality and sexual rights. Men’s sexual agency is treated differently from women’s sexual agency. An example of such differentiation and of gender marking is shown by contrasting the framing and labelling of male circumcision as an intervention aimed at the prevention of HIV with that of the female condom. Conclusions The gender-stereotyped global AIDS policy discourse negates women’s agency in sexuality and their sexual rights. This could be an important factor in limiting the scale-up of female condom programmes and hampering universal access to female condoms. PMID:23838151

Numerical model of solar dynamic radiator for parametric analysis

NASA Technical Reports Server (NTRS)

Rhatigan, Jennifer L.

1989-01-01

Growth power requirements for Space Station Freedom will be met through addition of 25 kW solar dynamic (SD) power modules. Extensive thermal and power cycle modeling capabilities have been developed which are powerful tools in Station design and analysis, but which prove cumbersome and costly for simple component preliminary design studies. In order to aid in refining the SD radiator to the mature design stage, a simple and flexible numerical model was developed. The model simulates heat transfer and fluid flow performance of the radiator and calculates area mass and impact survivability for many combinations of flow tube and panel configurations, fluid and material properties, and environmental and cycle variations.

Composite structural materials

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1981-01-01

The composite aircraft program component (CAPCOMP) is a graduate level project conducted in parallel with a composite structures program. The composite aircraft program glider (CAPGLIDE) is an undergraduate demonstration project which has as its objectives the design, fabrication, and testing of a foot launched ultralight glider using composite structures. The objective of the computer aided design (COMPAD) portion of the composites project is to provide computer tools for the analysis and design of composite structures. The major thrust of COMPAD is in the finite element area with effort directed at implementing finite element analysis capabilities and developing interactive graphics preprocessing and postprocessing capabilities. The criteria for selecting research projects to be conducted under the innovative and supporting research (INSURE) program are described.

Design, Development, and Evaluation of Visual Aids for Communicating Prescription Drug Instructions to Nonliterate Patients in Rural Cameroon.

ERIC Educational Resources Information Center

Ngoh, Lucy N.; Shepherd, Marvin D.

1997-01-01

Culturally sensitive visual aids designed to help convey drug information to nonliterate female adults requiring antibiotics were developed. Researchers conceptualized the messages, and a local artist produced the visual aids. Comprehension and compliance with prescription instructions were evaluated (N=78). Results and practical implications are…

Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

ERIC Educational Resources Information Center

Gosman, A. D.; And Others

1979-01-01

Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

PUZZLE - A program for computer-aided design of printed circuit artwork

NASA Technical Reports Server (NTRS)

Harrell, D. A. W.; Zane, R.

1971-01-01

Program assists in solving spacing problems encountered in printed circuit /PC/ design. It is intended to have maximum use for two-sided PC boards carrying integrated circuits, and also aids design of discrete component circuits.

NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Handler, B.H.; France, P.A.; Frey, S.C.

Data Systems Engineering Organization (DSEO) personnel developed a prototype computer aided instruction CAI system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project was to provide a CAI prototype that could be used as an enhancement to existing NALDA training. The CAI prototype project was performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. The findings from Phase I are documented in Recommended CAI Approach for the NALDA System (Duncan et al., 1987). Inmore » Phase II, a structured design and specifications were developed, and a prototype CAI system was created. A report, NALDA CAI Prototype: Phase II Final Report, was written to record the findings and results of Phase II. NALDA CAI: Recommendations for an Advanced Instructional Model, is comprised of related papers encompassing research on computer aided instruction CAI, newly developing training technologies, instructional systems development, and an Advanced Instructional Model. These topics were selected because of their relevancy to the CAI needs of NALDA. These papers provide general background information on various aspects of CAI and give a broad overview of new technologies and their impact on the future design and development of training programs. The paper within have been index separately elsewhere.« less

Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT)

NASA Technical Reports Server (NTRS)

Brown, Cheryl B.; Conger, Bruce C.; Miranda, Bruno M.; Bue, Grant C.; Rouen, Michael N.

2007-01-01

An effort was initiated by NASA/JSC in 2001 to develop an Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT) for the sizing of Extravehicular Activity System (EVAS) architecture and studies. Its intent was to support space suit development efforts and to aid in conceptual designs for future human exploration missions. Its basis was the Life Support Options Performance Program (LSOPP), a spacesuit and portable life support system (PLSS) sizing program developed for NASA/JSC circa 1990. EVAS_SAT estimates the mass, power, and volume characteristics for user-defined EVAS architectures, including Suit Systems, Airlock Systems, Tools and Translation Aids, and Vehicle Support equipment. The tool has undergone annual changes and has been updated as new data have become available. Certain sizing algorithms have been developed based on industry standards, while others are based on the LSOPP sizing routines. The sizing algorithms used by EVAS_SAT are preliminary. Because EVAS_SAT was designed for use by members of the EVA community, subsystem familiarity on the part of the intended user group and in the analysis of results is assumed. The current EVAS_SAT is operated within Microsoft Excel 2003 using a Visual Basic interface system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.; Kempner, L. Jr.; Mueller, W. III

The concept of an Expert System is not new. It has been around since the days of the early computers when scientists had dreams of robot automation to do everything from washing windows to automobile design. This paper discusses an application of an expert system and addresses software development issues and various levels of expert system development form a structural engineering viewpoint. An expert system designed to aid the structural engineer in first order inelastic analysis of latticed steel transmission powers is presented. The utilization of expert systems with large numerical analysis programs is discussed along with the software developmentmore » of such a system.« less

Composite structural materials

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1979-01-01

A multifaceted program is described in which aeronautical, mechanical, and materials engineers interact to develop composite aircraft structures. Topics covered include: (1) the design of an advanced composite elevator and a proposed spar and rib assembly; (2) optimizing fiber orientation in the vicinity of heavily loaded joints; (3) failure mechanisms and delamination; (4) the construction of an ultralight sailplane; (5) computer-aided design; finite element analysis programs, preprocessor development, and array preprocessor for SPAR; (6) advanced analysis methods for composite structures; (7) ultrasonic nondestructive testing; (8) physical properties of epoxy resins and composites; (9) fatigue in composite materials, and (10) transverse thermal expansion of carbon/epoxy composites.

System data communication structures for active-control transport aircraft, volume 1

NASA Technical Reports Server (NTRS)

Hopkins, A. L.; Martin, J. H.; Brock, L. D.; Jansson, D. G.; Serben, S.; Smith, T. B.; Hanley, L. D.

1981-01-01

Candidate data communication techniques are identified, including dedicated links, local buses, broadcast buses, multiplex buses, and mesh networks. The design methodology for mesh networks is then discussed, including network topology and node architecture. Several concepts of power distribution are reviewed, including current limiting and mesh networks for power. The technology issues of packaging, transmission media, and lightning are addressed, and, finally, the analysis tools developed to aid in the communication design process are described. There are special tools to analyze the reliability and connectivity of networks and more general reliability analysis tools for all types of systems.

State of the art in perceptual design of hearing aids

NASA Astrophysics Data System (ADS)

Edwards, Brent W.; van Tasell, Dianne J.

2002-05-01

Hearing aid capabilities have increased dramatically over the past six years, in large part due to the development of small, low-power digital signal processing chips suitable for hearing aid applications. As hearing aid signal processing capabilities increase, there will be new opportunities to apply perceptually based knowledge to technological development. Most hearing loss compensation techniques in today's hearing aids are based on simple estimates of audibility and loudness. As our understanding of the psychoacoustical and physiological characteristics of sensorineural hearing loss improves, the result should be improved design of hearing aids and fitting methods. The state of the art in hearing aids will be reviewed, including form factors, user requirements, and technology that improves speech intelligibility, sound quality, and functionality. General areas of auditory perception that remain unaddressed by current hearing aid technology will be discussed.

NASA Human Integration Design Handbook (HIDH): Revitalization of Space-Related Human Factors, Environmental, and Habitability Data and Design Guidance

NASA Technical Reports Server (NTRS)

Stroud, Kenneth; Pickett, Lynn; Tillman, Barry

2008-01-01

This poster presentation reviews the Human Integration Design Handbook (HIDH). It provides guidance and data to aid vehicle / habitat designers in human-system integration It also aids requirements writers in development of human-system integration requirements from SFHSS Standards

Army-NASA aircrew/aircraft integration program: Phase 4 A(3)I Man-Machine Integration Design and Analysis System (MIDAS) software detailed design document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Constantine, Betsy; Murray, Jerry; Neukom, Christian; Prevost, Michael; Shankar, Renuka; Staveland, Lowell

1991-01-01

The Man-Machine Integration Design and Analysis System (MIDAS) is an integrated suite of software components that constitutes a prototype workstation to aid designers in applying human factors principles to the design of complex human-machine systems. MIDAS is intended to be used at the very early stages of conceptual design to provide an environment wherein designers can use computational representations of the crew station and operator, instead of hardware simulators and man-in-the-loop studies, to discover problems and ask 'what if' questions regarding the projected mission, equipment, and environment. This document is the Software Product Specification for MIDAS. Introductory descriptions of the processing requirements, hardware/software environment, structure, I/O, and control are given in the main body of the document for the overall MIDAS system, with detailed discussion of the individual modules included in Annexes A-J.

21 CFR 874.3310 - Hearing aid calibrator and analysis system.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Hearing aid calibrator and analysis system. 874.3310 Section 874.3310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... aid calibrator and analysis system. (a) Identification. A hearing aid calibrator and analysis system...

21 CFR 874.3310 - Hearing aid calibrator and analysis system.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Hearing aid calibrator and analysis system. 874.3310 Section 874.3310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... aid calibrator and analysis system. (a) Identification. A hearing aid calibrator and analysis system...

21 CFR 874.3310 - Hearing aid calibrator and analysis system.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hearing aid calibrator and analysis system. 874.3310 Section 874.3310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... aid calibrator and analysis system. (a) Identification. A hearing aid calibrator and analysis system...

21 CFR 874.3310 - Hearing aid calibrator and analysis system.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Hearing aid calibrator and analysis system. 874.3310 Section 874.3310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... aid calibrator and analysis system. (a) Identification. A hearing aid calibrator and analysis system...

21 CFR 874.3310 - Hearing aid calibrator and analysis system.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Hearing aid calibrator and analysis system. 874.3310 Section 874.3310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... aid calibrator and analysis system. (a) Identification. A hearing aid calibrator and analysis system...

DeMAID/GA an Enhanced Design Manager's Aid for Intelligent Decomposition

NASA Technical Reports Server (NTRS)

Rogers, J. L.

1996-01-01

Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial public release of DeMAID in 1989, much research has been done in the areas of decomposition, concurrent engineering, parallel processing, and process management; many new tools and techniques have emerged. Based on these recent research and development efforts, numerous enhancements have been added to DeMAID to further aid the design manager in saving both cost and time in a design cycle. The key enhancement, a genetic algorithm (GA), will be available in the next public release called DeMAID/GA. The GA sequences the design processes to minimize the cost and time in converging a solution. The major enhancements in the upgrade of DeMAID to DeMAID/GA are discussed in this paper. A sample conceptual design project is used to show how these enhancements can be applied to improve the design cycle.

Iso-geometric analysis for neutron diffusion problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hall, S. K.; Eaton, M. D.; Williams, M. M. R.

Iso-geometric analysis can be viewed as a generalisation of the finite element method. It permits the exact representation of a wider range of geometries including conic sections. This is possible due to the use of concepts employed in computer-aided design. The underlying mathematical representations from computer-aided design are used to capture both the geometry and approximate the solution. In this paper the neutron diffusion equation is solved using iso-geometric analysis. The practical advantages are highlighted by looking at the problem of a circular fuel pin in a square moderator. For this problem the finite element method requires the geometry tomore » be approximated. This leads to errors in the shape and size of the interface between the fuel and the moderator. In contrast to this iso-geometric analysis allows the interface to be represented exactly. It is found that, due to a cancellation of errors, the finite element method converges more quickly than iso-geometric analysis for this problem. A fuel pin in a vacuum was then considered as this problem is highly sensitive to the leakage across the interface. In this case iso-geometric analysis greatly outperforms the finite element method. Due to the improvement in the representation of the geometry iso-geometric analysis can outperform traditional finite element methods. It is proposed that the use of iso-geometric analysis on neutron transport problems will allow deterministic solutions to be obtained for exact geometries. Something that is only currently possible with Monte Carlo techniques. (authors)« less

Using the Continuum of Design Modelling Techniques to Aid the Development of CAD Modeling Skills in First Year Industrial Design Students

ERIC Educational Resources Information Center

Storer, I. J.; Campbell, R. I.

2012-01-01

Industrial Designers need to understand and command a number of modelling techniques to communicate their ideas to themselves and others. Verbal explanations, sketches, engineering drawings, computer aided design (CAD) models and physical prototypes are the most commonly used communication techniques. Within design, unlike some disciplines,…

Positive future orientation as a mediator between traumatic events and mental health among children affected by HIV/AIDS in rural China.

PubMed

Zhang, Jintao; Zhao, Guoxiang; Li, Xiaoming; Hong, Yan; Fang, Xiaoyi; Barnett, Douglas; Lin, Xiuyun; Zhao, Junfeng; Zhang, Liying

2009-12-01

The current study was designed to explore the effect of future orientation in mediating the relationship between traumatic events and mental health in children affected by HIV/AIDS in rural China. Cross-sectional data were collected from 1221 children affected by HIV/AIDS (755 AIDS orphans and 466 vulnerable children). Future orientation among children was measured using three indicators (future expectation, hopefulness toward the future, and perceived control over the future). Measures of mental health consisted of depression, loneliness, and self-esteem. Children's experience of any traumatic events was measured using a modified version of the Life Incidence of Traumatic Events-Student Form. Mediation analysis was conducted using structural equation modeling (SEM) methods. Among the children surveyed, most of the traumatic indicators were negatively associated with future expectation, hopefulness, perceived control, and self-esteem, and positively associated with depression and loneliness. The SEM of mediation analysis demonstrated an adequate fit. Future orientation fully mediated the relationship between traumatic events and mental health and accounted for 67.9% of the total effect of traumatic events on mental health. Results of this study support the positive effect of future expectation in mediating the relationship between traumatic events and mental health among children affected by HIV/AIDS in China. Future mental health promotion and intervention efforts targeting children affected by HIV/AIDS should include components that can mitigate the negative impact of traumatic events on their lives. These components may aim to develop children's positive future expectations, increase their hopefulness toward the future, and improve their perceived control over the future.

The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs

PubMed Central

Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

2011-01-01

The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs. PMID:21816958

The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs.

PubMed

Kagan, Jonathan M; Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

2011-12-01

The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs.

Current Research in Aircraft Tire Design and Performance

NASA Technical Reports Server (NTRS)

Tanner, J. A.; Mccarthy, J. L.; Clark, S. K.

1981-01-01

A review of the tire research programs which address the various needs identified by landing gear designers and airplane users is presented. The experimental programs are designed to increase tire tread lifetimes, relate static and dynamic tire properties, establish the tire hydroplaning spin up speed, study gear response to tire failures, and define tire temperature profiles during taxi, braking, and cornering operations. The analytical programs are aimed at providing insights into the mechanisms of heat generation in rolling tires and developing the tools necessary to streamline the tire design process and to aid in the analysis of landing gear problems.

Present capabilities and future requirements for computer-aided geometric modeling in the design and manufacture of gas turbine

NASA Technical Reports Server (NTRS)

Caille, E.; Propen, M.; Hoffman, A.

1984-01-01

Gas turbine engine design requires the ability to rapidly develop complex structures which are subject to severe thermal and mechanical operating loads. As in all facets of the aerospace industry, engine designs are constantly driving towards increased performance, higher temperatures, higher speeds, and lower weight. The ability to address such requirements in a relatively short time frame has resulted in a major thrust towards integrated design/analysis/manufacturing systems. These computer driven graphics systems represent a unique challenge, with major payback opportunities if properly conceived, implemented, and applied.

Barriers and facilitators to participation in work among Canadian women living with HIV/AIDS.

PubMed

Barkey, Valerie; Watanabe, Elisa; Solomon, Patty; Wilkins, Seanne

2009-10-01

The impact of human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS) on the participation of women in paid/unpaid work is a little understood phenomenon. A research study exploring the lived experiences of Canadian women's engagement in paid/unpaid work and the barriers and facilitators mediating this phenomenon. Study design employed a phenomenological approach using data subanalysis of transcripts, double coded for agreement and to ensure saturation of themes. Analysis of the data revealed an overarching theme of engagement mediated by interacting forces with eight subthemes: active management, agency constrained by structure, the nature of supports, HIV/AIDS sequelae, work as a galvanizing force, the presence of children, the element of fear, and negotiation of self. Insights gained indicate a need for further education, resources, supports, and policy changes at the systems level. Occupational therapy is positioned to broaden the role of rehabilitation in the context of HIV/AIDS, episodic disability, and work participation.

Religiosity and adherence to antiretroviral therapy among patients attending a public hospital-based HIV/AIDS clinic in Uganda.

PubMed

Kisenyi, Rita N; Muliira, Joshua K; Ayebare, Elizabeth

2013-03-01

In Uganda, the prevalence of non-adherence to antiretroviral therapy (ART) by HIV/AIDS patients remains high and sometimes this is blamed on patients' religious behavior. A descriptive design was used to examine the relationship between religiosity and ART adherence in a sample of 220 patients attending a HIV/AIDS clinic in a Ugandan public hospital. Participants who self-identified as Pentecostal and Muslim had the highest percentage of members with high religiosity scores and ART adherence. Among Muslim participants (34), 82% reported high religiosity scores and high levels of ART adherence. Of the fifty Pentecostals participants, 96% reported high religiosity scores and 80% reported high levels of ART adherence. Correlation analysis showed a significant relationship between ART adherence and religiosity (r = 0.618, P ≤ 0.01). Therefore, collaboration between religious leaders and HIV/AIDS healthcare providers should be encouraged as one of the strategies for enhancing ART adherence.

Structural design methodologies for ceramic-based material systems

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Chulya, Abhisak; Gyekenyesi, John P.

1991-01-01

One of the primary pacing items for realizing the full potential of ceramic-based structural components is the development of new design methods and protocols. The focus here is on low temperature, fast-fracture analysis of monolithic, whisker-toughened, laminated, and woven ceramic composites. A number of design models and criteria are highlighted. Public domain computer algorithms, which aid engineers in predicting the fast-fracture reliability of structural components, are mentioned. Emphasis is not placed on evaluating the models, but instead is focused on the issues relevant to the current state of the art.

The role of networks and artificial intelligence in nanotechnology design and analysis.

PubMed

Hudson, D L; Cohen, M E

2004-05-01

Techniques with their origins in artificial intelligence have had a great impact on many areas of biomedicine. Expert-based systems have been used to develop computer-assisted decision aids. Neural networks have been used extensively in disease classification and more recently in many bioinformatics applications including genomics and drug design. Network theory in general has proved useful in modeling all aspects of biomedicine from healthcare organizational structure to biochemical pathways. These methods show promise in applications involving nanotechnology both in the design phase and in interpretation of system functioning.

The development of advanced manufacturing systems

NASA Astrophysics Data System (ADS)

Doumeingts, Guy; Vallespir, Bruno; Darricau, Didier; Roboam, Michel

Various methods for the design of advanced manufacturing systems (AMSs) are reviewed. The specifications for AMSs and problems inherent in their development are first discussed. Three models, the Computer Aided Manufacturing-International model, the National Bureau of Standards model, and the GRAI model, are considered in detail. Hierarchical modeling tools such as structured analysis and design techniques, Petri nets, and the Icam definition method are used in the development of integrated manufacturing models. Finally, the GRAI method is demonstrated in the design of specifications for the production management system of the Snecma AMS.

Strategies for the Creation, Design and Implementation of Effective Interactive Computer-Aided Learning Software in Numerate Business Subjects--The Byzantium Experience.

ERIC Educational Resources Information Center

Wilkinson-Riddle, G. J.; Patel, Ashok

1998-01-01

Discusses courseware development, including intelligent tutoring systems, under the Teaching and Learning Technology Programme and the Byzantium project that was designed to define computer-aided learning performance standards suitable for numerate business subjects; examine reasons to use computer-aided learning; and improve access to educational…

Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

ERIC Educational Resources Information Center

Advanced Technology, Inc., Reston, VA.

The purpose and direction of the quality improvement program of the U.S. Department of Education's Office of Student Financial Aid (OSFA) are described. The improvement program was designed to develop a systematic approach to identify, measure, and correct errors in the student aid delivery system. Information is provided on the general approach…

Professionalisation and social attitudes: a protocol for measuring changes in HIV/AIDS-related stigma among healthcare students

PubMed Central

Ahmadi, Keivan; Reidpath, Daniel D; Allotey, Pascale; Hassali, Mohamed Azmi Ahmad

2013-01-01

Introduction HIV/AIDS-related stigma affects the access and utilisation of health services. Although HIV/AIDS-related stigma in the health services has been studied, little work has attended to the relationship between professional development and stigmatising attitudes. Hence, in this study, we will extend earlier research by examining the relationship between the stage of professional development and the kinds of stigmatising attitudes held about people living with HIV/AIDS. Methods and analysis A serial cross-sectional design will be combined with a two-point in time longitudinal design to measure the levels of stigma among healthcare students from each year of undergraduate and graduate courses in Malaysia and Australia. In the absence of suitable measures, we will carry out a sequential mixed methods design to develop such a tool. The questionnaire data will be analysed using mixed effects linear models to manage the repeated measures. Ethics and dissemination We have received ethical approval from the Monash MBBS executive committee as well as the Monash University Human Research Ethics Committee. We will keep the data in a locked filing cabinet in the Monash University (Sunway campus) premises for 5 years, after which the information will be shredded and disposed of in secure bins, and digital recordings will be erased in accordance with Monash University's regulations. Only the principal investigator and the researcher will have access to the filing cabinet. We aim to present and publish the results of this study in national and international conferences and peer-reviewed journals, respectively. PMID:23793653

Logic Design Pathology and Space Flight Electronics

NASA Technical Reports Server (NTRS)

Katz, Richard; Barto, Rod L.; Erickson, K.

1997-01-01

Logic design errors have been observed in space flight missions and the final stages of ground test. The technologies used by designers and their design/analysis methodologies will be analyzed. This will give insight to the root causes of the failures. These technologies include discrete integrated circuit based systems, systems based on field and mask programmable logic, and the use computer aided engineering (CAE) systems. State-of-the-art (SOTA) design tools and methodologies will be analyzed with respect to high-reliability spacecraft design and potential pitfalls are discussed. Case studies of faults from large expensive programs to "smaller, faster, cheaper" missions will be used to explore the fundamental reasons for logic design problems.

Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

NASA Technical Reports Server (NTRS)

Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

1999-01-01

Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

Layered Composite Analysis Capability

NASA Technical Reports Server (NTRS)

Narayanaswami, R.; Cole, J. G.

1985-01-01

Laminated composite material construction is gaining popularity within industry as an attractive alternative to metallic designs where high strength at reduced weights is of prime consideration. This has necessitated the development of an effective analysis capability for the static, dynamic and buckling analyses of structural components constructed of layered composites. Theoretical and user aspects of layered composite analysis and its incorporation into CSA/NASTRAN are discussed. The availability of stress and strain based failure criteria is described which aids the user in reviewing the voluminous output normally produced in such analyses. Simple strategies to obtain minimum weight designs of composite structures are discussed. Several example problems are presented to demonstrate the accuracy and user convenient features of the capability.

Structural reliability analysis of laminated CMC components

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.; Palko, Joseph L.; Gyekenyesi, John P.

1991-01-01

For laminated ceramic matrix composite (CMC) materials to realize their full potential in aerospace applications, design methods and protocols are a necessity. The time independent failure response of these materials is focussed on and a reliability analysis is presented associated with the initiation of matrix cracking. A public domain computer algorithm is highlighted that was coupled with the laminate analysis of a finite element code and which serves as a design aid to analyze structural components made from laminated CMC materials. Issues relevant to the effect of the size of the component are discussed, and a parameter estimation procedure is presented. The estimation procedure allows three parameters to be calculated from a failure population that has an underlying Weibull distribution.

Defining Support Requirements During Conceptual Design of Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, N. H.; Davis, W. T.; Ebeling, C. E.

1995-01-01

Current methods for defining the operational support requirements of new systems are data intensive and require significant design information. Methods are being developed to aid in the analysis process of defining support requirements for new launch vehicles during their conceptual design phase that work with the level of information available during this phase. These methods will provide support assessments based on the vehicle design and the operating scenarios. The results can be used both to define expected support requirements for new launch vehicle designs and to help evaluate the benefits of using new technologies. This paper describes the models, their current status, and provides examples of their use.

An Oral History Study of Foreign Design Experts' Influence on Taiwanese Early Design Education from 1963 to 1966

ERIC Educational Resources Information Center

Lai, Chien-Tu Jeff

2013-01-01

There are documented accounts of the influential role of U.S. aid in the development of Taiwanese design education. Missing from the historical records of design education, however, are the perspectives of local design practitioners who participated in the design workshops during the period of U.S. aid to Taiwan, 1963 to 1966. Using face-to-face…

78 FR 5458 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding..., well-designed Hospice Survey will allow us to understand: (1) Patient experiences throughout their... accordance with CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those...

Remote Science Operation Center research

NASA Technical Reports Server (NTRS)

Banks, P. M.

1986-01-01

Progress in the following areas is discussed: the design, planning and operation of a remote science payload operations control center; design and planning of a data link via satellite; and the design and prototyping of an advanced workstation environment for multi-media (3-D computer aided design/computer aided engineering, voice, video, text) communications and operations.

Structured Analysis/Design - LSA Task 101, Early Logistic Support Analysis Strategy, Subtask 101.2.1, Develop Early LSA Strategy

DTIC Science & Technology

1990-07-01

replacing "logic diagrams" or "flow charts") to aid in coordinating the functions to be performed by a computer program and its associated Inputs...ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT ITASK IWORK UNIT ELEMENT NO. NO. NO. ACCESSION NO. 11. TITLE...the analysis. Both the logical model and detailed procedures are used to develop the application software programs which will be provided to Government

Study Design and Analysis Plan. Improving the Consumer Protection Function in Postsecondary Education.

ERIC Educational Resources Information Center

Jung, Steven M.; And Others

Postsecondary student aid programs administered by the United States Office of Education (USOE) have helped many thousands of students to obtain an education they may not otherwise have received; however, some schools have engaged in questionable or abusive practices that have frustrated student attainment of the desirable educational goals…

Impact of Undergraduate Research on Academic Performance, Educational Planning, and Career Development

ERIC Educational Resources Information Center

Kinkel, Doreen H.; Henke, Scott E.

2006-01-01

An undergraduate research mentoring program (URMP), initiated at Texas A&M University-Kingsville, was developed (1) to aid undergraduate wildlife students in the design, conduct, and analysis of original research projects; and (2) to encourage students to become effective written and oral communicators by preparing a manuscript of their…

"BRAIN": Baruch Retrieval of Automated Information for Negotiations.

ERIC Educational Resources Information Center

Levenstein, Aaron, Ed.

1981-01-01

A data processing program that can be used as a research and collective bargaining aid for colleges is briefly described and the fields of the system are outlined. The system, known as BRAIN (Baruch Retrieval of Automated Information for Negotiations), is designed primarily as an instrument for quantitative and qualitative analysis. BRAIN consists…

The Slope Test: Applications in Formative Evaluation.

ERIC Educational Resources Information Center

Baggaley, Jon; Brauer, Aaron-Henry

1989-01-01

Discusses problems with formative evaluation of educational materials and examines the slope test when used in a pretest/posttest multiple group (PPMG) design to adjust posttest scores treatment interaction studies. An example is given of the utility of the slope test and analysis of covariance procedure using an educational film about AIDS. (five…

Film Analysis through Linguistic Base

ERIC Educational Resources Information Center

Tanriverdi, Belgin

2007-01-01

Studies made in the last few years show that using films in language classrooms is an effective way in teaching a foreign language. Well-chosen films can serve as a valuable pedagogical aid, both for classroom use and self-study. This article is about using films in language classrooms through a specially designed course, whose outline description…

Data management for Computer-Aided Engineering (CAE)

NASA Technical Reports Server (NTRS)

Bryant, W. A.; Smith, M. R.

1984-01-01

Analysis of data flow through the design and manufacturing processes has established specific information management requirements and identified unique problems. The application of data management technology to the engineering/manufacturing environment addresses these problems. An overview of the IPAD prototype data base management system, representing a partial solution to these problems, is presented here.

The Use of Images in Intelligent Advisor Systems.

ERIC Educational Resources Information Center

Boulet, Marie-Michele

This paper describes the intelligent advisor system, named CODAMA, used in teaching a university-level systems analysis and design course. The paper discusses: (1) the use of CODAMA to assist students to transfer theoretical knowledge to the practical; (2) details of how CODAMA is applied in conjunction with a computer-aided software engineering…

Quality of School Life Scale: Means, Variances, Reliabilities, and Factor Analysis for Grades 10, 11, and 12.

ERIC Educational Resources Information Center

Nimmer, Donald N.

1979-01-01

The Quality of School Life Scale (QLS) is an instrument designed to measure students' perceptions of their school experiences. Such an instrument may aid educators in evaluating students' perceptions in the three areas identified by the QSL: satisfaction, commitment to classwork, and reactions to teachers. (Author)

Potsdam College Advocate Program: An Alternative to Speech Regulations.

ERIC Educational Resources Information Center

Gordon, Anna

The Potsdam Advocate program is a program designed to aid students who feel they are victims of discrimination or sexual offenses. An analysis of this program and its literature is instructive to students and scholars in the field of organizational communication. Developed in 1991, this program provides a structure and options that students may…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Kandler A; Usseglio Viretta, Francois L; Graf, Peter A

This presentation describes research work led by NREL with team members from Argonne National Laboratory and Texas A&M University in microstructure analysis, modeling and validation under DOE's Computer-Aided Engineering of Batteries (CAEBAT) program. The goal of the project is to close the gaps between CAEBAT models and materials research by creating predictive models that can be used for electrode design.

Characterization of Gas Chromatographic Liquid Phases Using McReynolds Constants. An Experiment for Instrumental Analysis Laboratory.

ERIC Educational Resources Information Center

Erskine, Steven R.; And Others

1986-01-01

Describes a laboratory experiment that is designed to aid in the understanding of the fundamental process involved in gas chromatographic separations. Introduces the Kovats retention index system for use by chemistry students to establish criteria for the optimal selection of gas chromatographic stationary phases. (TW)

Comparative Evaluation of a Four-Implant-Supported Polyetherketoneketone Framework Prosthesis: A Three-Dimensional Finite Element Analysis Based on Cone Beam Computed Tomography and Computer-Aided Design.

PubMed

Lee, Ki-Sun; Shin, Sang-Wan; Lee, Sang-Pyo; Kim, Jong-Eun; Kim, Jee-Hwan; Lee, Jeong-Yol

The purpose of this pilot study was to evaluate and compare polyetherketoneketone (PEKK) with different framework materials for implant-supported prostheses by means of a three-dimensional finite element analysis (3D-FEA) based on cone beam computed tomography (CBCT) and computer-aided design (CAD) data. A geometric model that consisted of four maxillary implants supporting a prosthesis framework was constructed from CBCT and CAD data of a treated patient. Three different materials (zirconia, titanium, and PEKK) were selected, and their material properties were simulated using FEA software in the generated geometric model. In the PEKK framework (ie, low elastic modulus) group, the stress transferred to the implant and simulated adjacent tissue was reduced when compressive stress was dominant, but increased when tensile stress was dominant. This study suggests that the shock-absorbing effects of a resilient implant-supported framework are limited in some areas and that rigid framework material shows a favorable stress distribution and safety of overall components of the prosthesis.

Estimation of the risk of failure for an endodontically treated maxillary premolar with MODP preparation and CAD/CAM ceramic restorations.

PubMed

Lin, Chun-Li; Chang, Yen-Hsiang; Pa, Che-An

2009-10-01

This study evaluated the risk of failure for an endodontically treated premolar with mesio occlusodistal palatal (MODP) preparation and 3 different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic restoration configurations. Three 3-dimensional finite element (FE) models designed with CAD/CAM ceramic onlay, endocrown, and conventional crown restorations were constructed to perform simulations. The Weibull function was incorporated with FE analysis to calculate the long-term failure probability relative to different load conditions. The results indicated that the stress values on the enamel, dentin, and luting cement for endocrown restoration were the lowest values relative to the other 2 restorations. Weibull analysis revealed that the individual failure probability in the endocrown enamel, dentin, and luting cement obviously diminished more than those for onlay and conventional crown restorations. The overall failure probabilities were 27.5%, 1%, and 1% for onlay, endocrown, and conventional crown restorations, respectively, in normal occlusal condition. This numeric investigation suggests that endocrown and conventional crown restorations for endodontically treated premolars with MODP preparation present similar longevity.

Remineralization potential of nano-hydroxyapatite on enamel and cementum surrounding margin of computer-aided design and computer-aided manufacturing ceramic restoration

PubMed Central

Juntavee, Niwut; Juntavee, Apa; Plongniras, Preeyarat

2018-01-01

Objective This study investigates the effects of nano-hydroxyapatite (NHA) gel and Clinpro (CP) on remineralization potential of enamel and cementum at the cavosurface area of computer-aided design and computer-aided manufacturing ceramic restoration. Materials and methods Thirty extracted human mandibular third molars were sectioned at 1 mm above and below the cemento–enamel junction to remove the cemento–enamel junction portions and replaced them with zirconia ceramic disks by bonding them to the crown and root portions with resin cement. The enamel and cementum with an area of 4×4 mm2 surrounding the ceramic disk was demineralized with carbopol. The demineralized surfaces were treated with either NHA or CP, while 1 group was left with no treatment. Vickers microhardness of enamel and cementum were determined before demineralization, after demineralization, and after remineralization. Analysis of variance and Tukey multiple comparisons were used to determine statistically significant differences at 95% level of confidence. Scanning electron microscopy and X-ray diffraction were used to evaluate for surface alterations. Results The mean ± SD of Vickers microhardness for before demineralization, after demineralization, and after remineralization for enamel and cementum were 377.37±22.99, 161.95±10.54, 161.70±5.92 and 60.37±3.81, 17.65±0.91, 17.04±1.00 for the no treatment group; 378.20±18.76, 160.72±8.38, 200.08±8.29 and 62.58±3.37, 18.38±1.33, 27.99±2.68 for the NHA groups; and 380.53±25.14, 161.94±5.66, 193.16±7.54 and 62.78±4.75, 19.07±1.30, 24.46±2.02 for the CP groups. Analysis of variance indicated significant increase in microhardness of demineralized enamel and cementum upon the application of either NHA or CP (p<0.05). Post hoc multiple comparisons indicated significantly higher remineralization capability of NHA for both enamel and cementum than CP (p<0.05), as evidenced by scanning electron microscopy, indicating NHA particle deposition in the area of remineralization, and crystallinity accumulation, as indicated by X-ray diffraction. Conclusion NHA gel and CP were capable of remineralization of the enamel and cementum. NHA was more capable in the remineralization process than CP. NHA was extremely capable in the remineralization process for enamel and cementum surrounding the margin of the computer-aided design and computer-aided manufacturing ceramic. PMID:29780246

A method of distributed avionics data processing based on SVM classifier

NASA Astrophysics Data System (ADS)

Guo, Hangyu; Wang, Jinyan; Kang, Minyang; Xu, Guojing

2018-03-01

Under the environment of system combat, in order to solve the problem on management and analysis of the massive heterogeneous data on multi-platform avionics system, this paper proposes a management solution which called avionics "resource cloud" based on big data technology, and designs an aided decision classifier based on SVM algorithm. We design an experiment with STK simulation, the result shows that this method has a high accuracy and a broad application prospect.

State Student Financial Aid. Report and Recommendations.

ERIC Educational Resources Information Center

Florida State Postsecondary Education Planning Commission, Tallahassee.

This report presents the results of a review of all state student financial aid programs in Florida and presents recommendations concerning program consolidation. The review was designed to address a variety of aid-related issues, including unexpended financial aid resources, program consolidation, budget request and aid distribution procedures,…

Computer-aided design of the RF-cavity for a high-power S-band klystron

NASA Astrophysics Data System (ADS)

Kant, D.; Bandyopadhyay, A. K.; Pal, D.; Meena, R.; Nangru, S. C.; Joshi, L. M.

2012-08-01

This article describes the computer-aided design of the RF-cavity for a S-band klystron operating at 2856 MHz. State-of-the-art electromagnetic simulation tools SUPERFISH, CST Microwave studio, HFSS and MAGIC have been used for cavity design. After finalising the geometrical details of the cavity through simulation, it has been fabricated and characterised through cold testing. Detailed results of the computer-aided simulation and cold measurements are presented in this article.

Computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems

NASA Astrophysics Data System (ADS)

Ku, Walter H.; Gang, Guan-Wan; He, J. Q.; Ichitsubo, I.

1988-05-01

This final technical report presents results on the computer aided design of monolithic microwave and millimeter wave integrated circuits and subsystems. New results include analytical and computer aided device models of GaAs MESFETs and HEMTs or MODFETs, new synthesis techniques for monolithic feedback and distributed amplifiers and a new nonlinear CAD program for MIMIC called CADNON. This program incorporates the new MESFET and HEMT model and has been successfully applied to the design of monolithic millimeter-wave mixers.

Man-machine Integration Design and Analysis System (MIDAS) Task Loading Model (TLM) experimental and software detailed design report

NASA Technical Reports Server (NTRS)

Staveland, Lowell

1994-01-01

This is the experimental and software detailed design report for the prototype task loading model (TLM) developed as part of the man-machine integration design and analysis system (MIDAS), as implemented and tested in phase 6 of the Army-NASA Aircrew/Aircraft Integration (A3I) Program. The A3I program is an exploratory development effort to advance the capabilities and use of computational representations of human performance and behavior in the design, synthesis, and analysis of manned systems. The MIDAS TLM computationally models the demands designs impose on operators to aide engineers in the conceptual design of aircraft crewstations. This report describes TLM and the results of a series of experiments which were run this phase to test its capabilities as a predictive task demand modeling tool. Specifically, it includes discussions of: the inputs and outputs of TLM, the theories underlying it, the results of the test experiments, the use of the TLM as both stand alone tool and part of a complete human operator simulation, and a brief introduction to the TLM software design.

CAD system for footwear design based on whole real 3D data of last surface

NASA Astrophysics Data System (ADS)

Song, Wanzhong; Su, Xianyu

2000-10-01

Two major parts of application of CAD in footwear design are studied: the development of last surface; computer-aided design of planar shoe-template. A new quasi-experiential development algorithm of last surface based on triangulation approximation is presented. This development algorithm consumes less time and does not need any interactive operation for precisely development compared with other development algorithm of last surface. Based on this algorithm, a software, SHOEMAKERTM, which contains computer aided automatic measurement, automatic development of last surface and computer aide design of shoe-template has been developed.

HIV/AIDS Communication Inequalities and Associated Cognitive and Affective Outcomes: A Call for a Socioecological Approach to AIDS Communication in Sub-Saharan Africa.

PubMed

Bekalu, Mesfin Awoke; Eggermont, Steven; Viswanath, K Vish

2017-06-01

Three-and-a-half decades on, no cure or vaccine is yet on the horizon for HIV, making effective behavior change communication (BCC) the key preventive strategy. Despite considerable success, HIV/AIDS BCC efforts have long been criticized for their primary focus on the individual-level field of influence, drawing on the more reductionist view of causation at the individual level. In view of this, we conducted a series of studies that employed a household survey, field experiment, and textual content analysis, and explored the macro-social-level effects of HIV/AIDS-related media and messages on HIV/AIDS cognitive and affective outcomes in Ethiopia. Against a backdrop of epidemiological and socioecological differences, urban versus rural residence has emerged as an important community-level factor that impacts HIV/AIDS-related media and message consumption processes and associated outcomes. The central thread crossing through the six studies included in this paper demonstrates that urban and rural people in high HIV prevalence contexts differ in their concern about and information needs on HIV/AIDS, HIV/AIDS-related media use, and HIV/AIDS-related cognitive and affective outcomes, as well as in their reaction to differently designed/framed HIV prevention messages. This paper proposes that HIV prevention media and message effects in high epidemic situations should be considered from a larger community-level perspective and calls for a socioecological approach to AIDS communication in the hard-hit sub-Saharan Africa. With a number of concrete recommendations to current and future HIV/AIDS BCC efforts in the region, the study joins an emerging body of health communication literature and theorizing that suggests the need to consider media and message effects from a macro-social perspective.

[The HIV/AIDS epidemic and women in Mexico].

PubMed

del Río-Zolezzi, A; Liguori, A L; Magis-Rodríguez, C; Valdespino-Gómez, J L; García-García, M de L; Sepúlveda-Amor, J

1995-01-01

This study presents an analysis of AIDS cases and seroprevalence of HIV infection among Mexican women, from the onset of the epidemic through June 1994, as well as the analysis of the social and cultural factors that put women in a powerless situation regarding the adoption of preventive measures. Since 1985, when the first AIDS cases among women were reported in Mexico and until June 1, 1994, a total of 2,767 cases have been reported, representing 14.8% of the total number of cases. The first cases of AIDS among women were associated to infected blood transfusions; however, in 1986, heterosexually transmitted cases began to appear. Currently, only 35% of newly reported AIDS cases are associated to blood transfusions while 64% of them are related to heterosexual transmission. In fact, two epidemics are evident: one transmitted through blood, showing a downward trend (duplication time 45 months), and a second one, heterosexually transmitted, increasing twice as fast (duplication time 27 months). The latter is expected to dominate AIDS epidemiology among women in the future. In general, women are more vulnerable to HIV/AIDS biologically, but also socially and culturally. Women's economic, social and cultural subordination to their sexual partners results in a situation that makes it difficult for them to assess their infection risk and even more, to negotiate taking preventive measures. This situation is even more disadvantageous to rural women and, together with the recent trend of the AIDS epidemic to ruralization and with internal and international migration (temporary work force migration to the USA), can result in deep demographic and social effects. We conclude that it is necessary to work on the design and assessment of preventive measures under women's control, that empower them to protect themselves even without their partner's awareness. Also, it is necessary to promote sexual education among young heterosexual couples on how to talk about sexual issues and negotiate the use of preventive measure according to their actual sexual practices.

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

PubMed

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

Prevalence of and risk factors for depressive symptoms among people living with HIV/AIDS receiving antiretroviral treatment in Wuhan, China: a short report.

PubMed

Rong, Hu; Nianhua, Xie; Jun, Xu; Lianguo, Ruan; Si, Wu; Sheng, Wei; Heng, Guo; Xia, Wang

2017-12-01

We aimed to explore the prevalence of and risk factors for depressive symptoms (DS) among people living with HIV/AIDS (PLWHA) receiving antiretroviral treatment (ART) in Wuhan, Hubei, China. A cross-sectional study evaluating adult PLWHA receiving ART in nine designated clinical hospitals was conducted from October to December 2015. The validated Beck Depression Inventory (BDI) was used to assess DS in eligible participants. Socio-demographical, epidemiological and clinical data were directly extracted from the case reporting database of the China HIV/AIDS Information Network. Multinomial regression analysis was used to explore the risk factors for DS. 394 participants were finally included in all analyses. 40.3% were found to have DS with 13.7% having mild DS and 26.6% having moderate to severe DS. The results of multinomial regression analysis suggested that being married or living with a partner, recent experience of ART-related side effects, and/or history of HCV infection were positively associated with mild DS, while increasing age was positively associated with moderate to severe DS.

Experiencing an Epidemic: A Seminar Designed To Explore the Spread and Prevention of the AIDS Virus.

ERIC Educational Resources Information Center

Rochlin, Joyce T.

A seminar was designed to present AIDS (Acquired Immune Deficiency Syndrome) related information to 52 college students enrolled in Psychology 101 courses at Essex Community College in Maryland. First, a questionnaire was administered to determine student knowledge about AIDS. The next part of the procedure was an intervention in the form of a…

Programming Design Guide for Computer Implementation of Job Aid for Selecting Instructional Setting. Final Report.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

This Programming Design Guide (PDG) was developed to permit the offline Job Aid for Selecting Instructional Setting, which is one of 13 job aids presently available for use with the Instructional Systems Development (ISD) model, to be available in an inquiry-type, online version. It is intended to provide computer programmers with all of the…

Defense Acquisitions Acronyms and Terms

DTIC Science & Technology

2012-12-01

Computer-Aided Design CADD Computer-Aided Design and Drafting CAE Component Acquisition Executive; Computer-Aided Engineering CAIV Cost As an...Radiation to Ordnance HFE Human Factors Engineering HHA Health Hazard Assessment HNA Host-Nation Approval HNS Host-Nation Support HOL High -Order...Engineering Change Proposal VHSIC Very High Speed Integrated Circuit VLSI Very Large Scale Integration VOC Volatile Organic Compound W WAN Wide

Consideration of Insulin Pumps or Continuous Glucose Monitors by Adolescents With Type 1 Diabetes and Their Parents: Stakeholder Engagement in the Design of Web-Based Decision Aids.

PubMed

Wysocki, Tim; Hirschfeld, Fiona; Miller, Louis; Izenberg, Neil; Dowshen, Steven A; Taylor, Alex; Milkes, Amy; Shinseki, Michelle T; Bejarano, Carolina; Kozikowski, Chelsea; Kowal, Karen; Starr-Ashton, Penny; Ross, Judith L; Kummer, Mark; Carakushansky, Mauri; Lyness, D'Arcy; Brinkman, William; Pierce, Jessica; Fiks, Alexander; Christofferson, Jennifer; Rafalko, Jessica; Lawson, Margaret L

2016-08-01

This article describes the stakeholder-driven design, development, and testing of web-based, multimedia decision aids for youth with type 1 diabetes who are considering the insulin pump or continuous glucose monitoring and their parents. This is the initial phase of work designed to develop and evaluate the efficacy of these decision aids in promoting improved decision-making engagement with use of a selected device. Qualitative interviews of 36 parents and adolescents who had previously faced these decisions and 12 health care providers defined the content, format and structure of the decision aids. Experts in children's health media helped the research team to plan, create, and refine multimedia content and its presentation. A web development firm helped organize the content into a user-friendly interface and enabled tracking of decision aid utilization. Throughout, members of the research team, adolescents, parents, and 3 expert consultants offered perspectives about the website content, structure, and function until the design was complete. With the decision aid websites completed, the next phase of the project is a randomized controlled trial of usual clinical practice alone or augmented by use of the decision aid websites. Stakeholder-driven development of multimedia, web-based decision aids requires meticulous attention to detail but can yield exceptional resources for adolescents and parents contemplating major changes to their diabetes regimens. © 2016 The Author(s).

Using eye tracking technology to compare the effectiveness of malignant hyperthermia cognitive aid design.

PubMed

King, Roderick; Hanhan, Jaber; Harrison, T Kyle; Kou, Alex; Howard, Steven K; Borg, Lindsay K; Shum, Cynthia; Udani, Ankeet D; Mariano, Edward R

2018-05-15

Malignant hyperthermia is a rare but potentially fatal complication of anesthesia, and several different cognitive aids designed to facilitate a timely and accurate response to this crisis currently exist. Eye tracking technology can measure voluntary and involuntary eye movements, gaze fixation within an area of interest, and speed of visual response and has been used to a limited extent in anesthesiology. With eye tracking technology, we compared the accessibility of five malignant hyperthermia cognitive aids by collecting gaze data from twelve volunteer participants. Recordings were reviewed and annotated to measure the time required for participants to locate objects on the cognitive aid to provide an answer; cumulative time to answer was the primary outcome. For the primary outcome, there were differences detected between cumulative time to answer survival curves (P < 0.001). Participants demonstrated the shortest cumulative time to answer when viewing the Society for Pediatric Anesthesia (SPA) cognitive aid compared to four other publicly available cognitive aids for malignant hyperthermia, and this outcome was not influenced by the anesthesiologists' years of experience. This is the first study to utilize eye tracking technology in a comparative evaluation of cognitive aid design, and our experience suggests that there may be additional applications of eye tracking technology in healthcare and medical education. Potentially advantageous design features of the SPA cognitive aid include a single page, linear layout, and simple typescript with minimal use of single color blocking.

A discussion of HIV/AIDS family interventions: implications for family-focused nursing practice.

PubMed

Eustace, Rosemary W

2013-07-01

This article presents a discussion on the role of family interventions in HIV/AIDS disease prevention and care. Although HIV/AIDS epidemic and its impact on the society traditionally has been measured in terms of individual risk behaviours and individual-level HIV prevention, HIV/AIDS family-focused prevention and management strategies are increasingly becoming a priority. However, little is known as to what constitutes a HIV/AIDS family intervention. The search was limited to English and published literature starting in the year 1983 to date. CINAHL and PubMed were emphasized using a combination of text words and subject headings. Cochrane Library, PsycInfo, Scopus, and the ISI Web of Science databases were also searched using keywords and in the case of PsycInfo, subject headings were used. The main keywords were 'nurse', or 'nursing', 'HIV/AIDS', 'family interventions', 'family support' and 'family education', and/or 'family subsystems'. The process of theorizing about 'family interventions' and 'HIV/AIDS-family interventions' is critical for putting forth essential components unique for designing culturally specific HIV/AIDS family interventions. In addition, any proposed design of HIV/AIDS family intervention should consider the impact of HIV/AIDS on the family across the family life span, disease trajectory, and from an interdisciplinary perspective. Training needs of family nurses should be met when designing multidisciplinary HIV/AIDS-FIs. Furthermore, nurses should be proactive in advocating for HIV/AIDS family intervention and HIV/AIDS family policies to improve outcomes in family functioning, processes, and relationships. More needs to be done in regard to research on families, family interventions, effectiveness, and cost of family-focused approaches. © 2012 Blackwell Publishing Ltd.

CAESY - COMPUTER AIDED ENGINEERING SYSTEM

NASA Technical Reports Server (NTRS)

Wette, M. R.

1994-01-01

Many developers of software and algorithms for control system design have recognized that current tools have limits in both flexibility and efficiency. Many forces drive the development of new tools including the desire to make complex system modeling design and analysis easier and the need for quicker turnaround time in analysis and design. Other considerations include the desire to make use of advanced computer architectures to help in control system design, adopt new methodologies in control, and integrate design processes (e.g., structure, control, optics). CAESY was developed to provide a means to evaluate methods for dealing with user needs in computer-aided control system design. It is an interpreter for performing engineering calculations and incorporates features of both Ada and MATLAB. It is designed to be reasonably flexible and powerful. CAESY includes internally defined functions and procedures, as well as user defined ones. Support for matrix calculations is provided in the same manner as MATLAB. However, the development of CAESY is a research project, and while it provides some features which are not found in commercially sold tools, it does not exhibit the robustness that many commercially developed tools provide. CAESY is written in C-language for use on Sun4 series computers running SunOS 4.1.1 and later. The program is designed to optionally use the LAPACK math library. The LAPACK math routines are available through anonymous ftp from research.att.com. CAESY requires 4Mb of RAM for execution. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. CAESY was developed in 1993 and is a copyrighted work with all copyright vested in NASA.

Public perceptions about HIV/AIDS and discriminatory attitudes toward people living with acquired immunodeficiency syndrome in Iran.

PubMed

Masoudnia, Ebrahim

2015-01-01

Negative and discriminatory attitudes towards people living with HIV/AIDS (PLWHA) are one of the biggest experienced challenges by people suffering from HIV, and these attitudes have been regarded as a serious threat to the fundamental rights of all infected people who are affected or associated with this disease in Iran. This study aimed to determine the relationship between public perception about HIV/AIDS and discriminatory attitudes toward PLWHA . The present study was conducted using a descriptive and survey design. Data were collected from 450 patients (236 male and 214 female) in Tehran and Yazd cities. The research instruments were modified HIV-related knowledge/attitude and perception questions about PLWHA, and discriminatory attitudes toward PLWHA. The results showed that prevalence of discriminatory attitudes toward PLWHA in the studied population was 60.0%. There was a significant negative correlation between citizens' awareness about HIV/AIDS, HIV-related attitudes, negative perception toward people with HIV/AIDS symptoms and their discriminatory attitudes toward PLWHA (p < .01). The hierarchical multiple regression analysis showed that components of public perception about HIV/AIDS explained for 23.7% of the variance of discriminatory attitudes toward PLWHA. Negative public perceptions about HIV/AIDS in Iran associated with discriminatory attitudes toward PLWHA and cultural beliefs in Iran tend to stigmatize and discriminate against the LWHA.

A Self-Instructional Course in Student Financial Aid Administration. Module 15: Internal Aid Office Management and Institutional Quality Control. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The 15th in a 17-module self-instructional course on student financial aid administration (designed for novice financial aid administrators and other institutional personnel) focuses on internal aid office management and institutional quality control. The course provides a systematic introduction to the management of federal financial aid programs…

Challenges facing developers of CAD/CAM models that seek to predict human working postures

NASA Astrophysics Data System (ADS)

Wiker, Steven F.

2005-11-01

This paper outlines the need for development of human posture prediction models for Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) design applications in product, facility and work design. Challenges facing developers of posture prediction algorithms are presented and discussed.

Space shuttle maneuvering engine reusable thrust chamber program. Task 11: Stability analyses and acoustic model testing data dump

NASA Technical Reports Server (NTRS)

Oberg, C. L.

1974-01-01

The combustion stability characteristics of engines applicable to the Space Shuttle Orbit Maneuvering System and the adequacy of acoustic cavities as a means of assuring stability in these engines were investigated. The study comprised full-scale stability rating tests, bench-scale acoustic model tests and analysis. Two series of stability rating tests were made. Acoustic model tests were made to determine the resonance characteristics and effects of acoustic cavities. Analytical studies were done to aid design of the cavity configurations to be tested and, also, to aid evaluation of the effectiveness of acoustic cavities from available test results.

Aid for Trade: an opportunity to increase fruit and vegetable supply.

PubMed

Thow, Anne Marie; Priyadarshi, Shishir

2013-01-01

Low fruit and vegetable consumption is an important contributor to the global burden of disease. In the wake of the United Nations High-level Meeting on Non-Communicable Diseases (NCDs), held in September 2011, a rise in the consumption of fruits and vegetables is foreseeable and this increased demand will have to be met through improved supply. The World Health Organization, the Food and Agriculture Organization and the World Bank have highlighted the potential for developing countries to benefit nutritionally and economically from the increased production and export of fruit and vegetables.Aid for Trade, launched in 2005 as an initiative designed to link development aid and trade holistically, offers an opportunity for the health and trade sectors to work jointly to enhance health and development. The Aid for Trade work programme stresses the importance of policy coherence across sectors, yet the commonality of purpose driving the Aid for Trade initiative and NCD prevention efforts has not been explored.In this paper food supply chain analysis was used to show health policy-makers that Aid for Trade can provide a mechanism for increasing the supply of fruits and vegetables in developing countries. Aid for Trade is an existing funding channel with clear accountability and reporting mechanisms, but its priorities are determined with little or no input from the health sector. The paper seeks to enable public health policy-makers, practitioners and advocates to improve coherence between trade and public health policies by highlighting Aid for Trade's potential role in this endeavour.

Effectiveness of a training program to increase the capacity of health care providers to provide HIV/AIDS care and treatment in Swaziland.

PubMed

Kamiru, H N; Ross, M W; Bartholomew, L K; McCurdy, S A; Kline, M W

2009-11-01

Implementation of HIV care and treatment programs in sub-Saharan Africa is a complex undertaking that requires training of health care providers (HCPs). Many sub-Saharan African countries have introduced training programs to build human resources for health. Evaluation of the ongoing trainings is warranted so that programs can be improved. The purpose of this study was to evaluate Baylor International Pediatric AIDS Initiative's (BIPAI) HCP training program in Swaziland. The specific aims were: (1) to assess coverage and delivery of the training program; and (2) to determine the impact of the training program on HCPs' knowledge about HIV and pediatric practices, attitudes toward HIV/AIDS patients, and self-efficacy to provide antiretroviral therapy (ART). The evaluation was a multimethod design with two types of data collection and analysis: (1) one-group pretest-posttest survey with 101 HCPs; and (2) semi-structured in-depth interviews with seven trainers from Baylor College of Medicine and 16 local HCPs in Swaziland. Quantitative data were analyzed using Stata Statistical Software version 8.2 for descriptive and multivariate analysis while factor analysis was done using Statistical Program for Social Sciences version 14. The transcribed interviews were analyzed using a didactic approach. Process evaluation showed that the training had good coverage, was delivered as intended, and improved as the work progressed. The training program led to a significant increase (p=0.0000) in HCPs' knowledge about HIV/AIDS, ART, and relevant clinical pediatrics practices between pretest (mean 68.7% SD 13.7) and post training (mean 84.0% SD 12.0). The training program also increased trainees' self-efficacy to provide ART and their attitudes toward AIDS patients (p=0.0000 and 0.02, respectively). In conclusion, BIPAI training program in Swaziland had good coverage of all health care facilities and HCPs in Swaziland. The training was effective in imparting knowledge and skills to HCPs and in their attitudes toward HIV/AIDS patients.

Value-based design for the elderly: An application in the field of mobility aids.

PubMed

Boerema, Simone T; van Velsen, Lex; Vollenbroek-Hutten, Miriam M R; Hermens, Hermie J

2017-01-01

In the aging society, the need for the elderly to remain mobile and independent is higher than ever. However, many aids supporting mobility often fail to target real needs and lack acceptance. The aim of this study is to demonstrate how value-based design can contribute to the design of mobility aids that address real needs and thus, lead to high acceptance. We elicited values, facilitators, and barriers of mobility of older adults via ten in-depth interviews. Next, we held co-creation sessions, resulting in several designs of innovative mobility aids, which were evaluated for acceptance via nine in-depth interviews. The interviews resulted in a myriad of key values, such as "independence from family" and "doing their own groceries." Design sessions resulted in three designs for a wheeled walker. Their acceptance was rather low. Current mobility device users were more eager to accept the designs than non-users. The value-based approach offers designers a close look into the lives of the elderly, thereby opening up a wide range of innovation possibilities that better fit their actual needs. Product service systems seem to be a promising focus for targeting human needs in mobility device design.

Computer-aided design of high-frequency transistor amplifiers.

NASA Technical Reports Server (NTRS)

Hsieh, C.-C.; Chan, S.-P.

1972-01-01

A systematic step-by-step computer-aided procedure for designing high-frequency transistor amplifiers is described. The technique makes it possible to determine the optimum source impedance which gives a minimum noise figure.

NHDOT : process for municipally managed state aid highway program projects

DOT National Transportation Integrated Search

2006-05-23

The design and construction of Municipally Managed State Aid Highway Program projects must comply with the requirements in this guideline in order to receive State Aid under the applicable provisions of RSA 235. Under this process, State Aid Construc...

CTAS data analysis program

NASA Technical Reports Server (NTRS)

Neuman, Frank; Erzberger, Heinz; Schueller, Michael S.

1994-01-01

The analysis program (AN) is specifically designed to produce graphic and tabular information to aid in the design and checkout of the Center TRACON Automation System (CTAS). To best reveal CTAS operation and possible problems, data are plotted in many different ways both in detail and summary form. AN has been designed to analyze both radar surveillance data and output data from CTAS. AN has been extensively used to debug and refine CTAS. It is also being used in the field to monitor and assess CTAS performance. AN is continuously refined to keep up with changing needs. The present version of AN grew out of analysis of Denver Center data. However, the AN software has been written to be adaptable to any other facility Center or TRACON. Presently, one can select Denver Stapleton, Denver International, Dallas/Fort Worth International Airport, and Dallas Love Field.

Evolutionary and Comparative Genomics to Drive Rational Drug Design, with Particular Focus on Neuropeptide Seven-Transmembrane Receptors.

PubMed

Furlong, Michael; Seong, Jae Young

2017-01-01

Seven transmembrane receptors (7TMRs), also known as G protein-coupled receptors, are popular targets of drug development, particularly 7TMR systems that are activated by peptide ligands. Although many pharmaceutical drugs have been discovered via conventional bulk analysis techniques the increasing availability of structural and evolutionary data are facilitating change to rational, targeted drug design. This article discusses the appeal of neuropeptide-7TMR systems as drug targets and provides an overview of concepts in the evolution of vertebrate genomes and gene families. Subsequently, methods that use evolutionary concepts and comparative analysis techniques to aid in gene discovery, gene function identification, and novel drug design are provided along with case study examples.

Evolutionary and Comparative Genomics to Drive Rational Drug Design, with Particular Focus on Neuropeptide Seven-Transmembrane Receptors

PubMed Central

Furlong, Michael; Seong, Jae Young

2017-01-01

Seven transmembrane receptors (7TMRs), also known as G protein-coupled receptors, are popular targets of drug development, particularly 7TMR systems that are activated by peptide ligands. Although many pharmaceutical drugs have been discovered via conventional bulk analysis techniques the increasing availability of structural and evolutionary data are facilitating change to rational, targeted drug design. This article discusses the appeal of neuropeptide-7TMR systems as drug targets and provides an overview of concepts in the evolution of vertebrate genomes and gene families. Subsequently, methods that use evolutionary concepts and comparative analysis techniques to aid in gene discovery, gene function identification, and novel drug design are provided along with case study examples. PMID:28035082

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides a detailed description of the DSPAmore » Computer Program system and its subprograms. This manual will assist the programmer in revising or updating the several subprograms.« less

A Design for a Model College Financial Aid Office. Revised 1980.

ERIC Educational Resources Information Center

Van Dusen, William D.; O'Hearne, John J.

The third edition of a guide for the college financial aid office substantially modifies previously presented material because of the changes that have been occurring in college student financial aid. Topics are as follows: development of student financial aid programs; current forms of college student financial aid; principles and practices of…

38 CFR 17.194 - Aid for domiciliary care.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Aid for domiciliary care... Aid to States for Care of Veterans in State Homes § 17.194 Aid for domiciliary care. Aid may be paid to the designated State official for domiciliary care furnished in a recognized State home for any...

Mommy, Daddy--What's AIDS?

ERIC Educational Resources Information Center

National Association of Pediatric Nurse Associates and Practitioners, Cherry Hill, NJ.

This brochure is designed to help parents answer the questions that their children may ask them about Acquired Immune Deficiency Syndrome (AIDS) and the Human Immuno Deficiency Virus (HIV), the virus that causes AIDS. It provides basic information about AIDS and HIV, as well as sources for further information, such as the National AIDS Hotline. It…

Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

PubMed

Yoon, Hyung-In; Han, Jung-Suk

2016-02-01

The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Making a Math Teaching Aids of Junior High School Based on Scientific Approach Through an Integrated and Sustainable Training

NASA Astrophysics Data System (ADS)

Pujiastuti, E.; Mashuri

2017-04-01

Not all of teachers of Mathematics in Junior High School (JHS) can design and create teaching aids. Moreover, if teaching aids should be designed so that it can be used in learning through scientific approaches. The problem: How to conduct an integrated and sustainable training that the math teacher of JHS, especially in Semarang can design and create teaching aids that can be presented to the scientific approach? The purpose of this study to find a way of integrated and continuous training so that the math teacher of JHS can design and create teaching aids that can be presented to the scientific approach. This article was based on research with a qualitative approach. Through trials activities of resulting of training model, Focus Group Discussions (FGD), interviews, and triangulation of the results of the research were: (1) Produced a training model of integrated and sustainable that the mathematics teacher of JHS can design and create teaching aids that can be presented to the scientific approach. (2) In training, there was the provision of material and workshop (3) There was a mentoring in the classroom. (4) Sustainability of the consultation. Our advice: (1) the trainer should be clever, (2) the training can be held at the holidays, while the assistance during the holiday season was over.

The Relationship between Personality Type and Acceptable Noise Levels: A Pilot Study.

PubMed

Franklin, Cliff; Johnson, Laura V; White, Letitia; Franklin, Clay; Smith-Olinde, Laura

2013-01-01

Objectives. This study examined the relationship between acceptable noise level (ANL) and personality. ANL is the difference between a person's most comfortable level for speech and the loudest level of background noise they are willing to accept while listening to speech. Design. Forty young adults with normal hearing participated. ANLs were measured and two personality tests (Big Five Inventory, Myers-Briggs Type Indicator) were administered. Results. The analysis revealed a correlation between ANL and the openness and conscientious personality dimensions from the Big Five Inventory; no correlation emerged between ANL and the Myers-Briggs personality types. Conclusions. Lower ANLs are correlated with full-time hearing aid use and the openness personality dimension; higher ANLs are correlated with part-time or hearing aid nonuse and the conscientious personality dimension. Current data suggest that those more open to new experiences may accept more noise and possibly be good hearing aid candidates, while those more conscientious may accept less noise and reject hearing aids, based on their unwillingness to accept background noise. Knowing something about a person's personality type may help audiologists determine if their patients will likely be good candidates for hearing aids.

The Relationship between Personality Type and Acceptable Noise Levels: A Pilot Study

PubMed Central

Franklin, Cliff; Johnson, Laura V.; Franklin, Clay

2013-01-01

Objectives. This study examined the relationship between acceptable noise level (ANL) and personality. ANL is the difference between a person's most comfortable level for speech and the loudest level of background noise they are willing to accept while listening to speech. Design. Forty young adults with normal hearing participated. ANLs were measured and two personality tests (Big Five Inventory, Myers-Briggs Type Indicator) were administered. Results. The analysis revealed a correlation between ANL and the openness and conscientious personality dimensions from the Big Five Inventory; no correlation emerged between ANL and the Myers-Briggs personality types. Conclusions. Lower ANLs are correlated with full-time hearing aid use and the openness personality dimension; higher ANLs are correlated with part-time or hearing aid nonuse and the conscientious personality dimension. Current data suggest that those more open to new experiences may accept more noise and possibly be good hearing aid candidates, while those more conscientious may accept less noise and reject hearing aids, based on their unwillingness to accept background noise. Knowing something about a person's personality type may help audiologists determine if their patients will likely be good candidates for hearing aids. PMID:24349796

The Significance of Sexuality and Intimacy in the Lives of Older African Americans With HIV/AIDS

PubMed Central

Nevedal, Andrea; Sankar, Andrea

2016-01-01

Purpose of the Study: Aging and HIV/AIDS research focuses primarily on standardized clinical, social, and behavioral measures, leaving unanswered questions about how this chronic and stigmatizing condition affects life course expectations and the meaning of aging with the disease. Utilizing Gaylene Becker’s (1997) life course disruption theory, we explored older African Americans’ experiences of living with HIV/AIDS. Design and Methods: A purposive sample (N = 43) of seropositive African Americans aged 50 and older was selected from a parent study. Thirteen participants completed one semi-structured in-depth interview on life course expectations and experiences of living with HIV/AIDS. Interview transcripts were analyzed using standard qualitative coding and thematic analysis. Results: Responding to broad, open-ended questions about the impact of HIV on life course expectations, participants emphasized how HIV limited their ability to experience sexuality and intimacy. Two major themes emerged, damaged sexuality and constrained intimacy. Implications: Older African Americans’ discussions of living with HIV focused on the importance of and the challenges to sexuality and intimacy. Researchers and clinicians should be attentive to significant and ongoing HIV-related challenges to sexuality and intimacy facing older African Americans living with HIV/AIDS. PMID:26035889

Effectiveness of a first-aid intervention program applied by undergraduate nursing students to preparatory school children.

PubMed

Wafik, Wagida; Tork, Hanan

2014-03-01

Childhood injuries constitute a major public health problem worldwide. First aid is an effective life-preservation tool at work, school, home, and in public locations. In this study, the effectiveness of a first-aid program delivered by undergraduate nursing students to preparatory school children was examined. This quasi-experimental study was carried out on 100 school children in governmental preparatory schools in Egypt. The researchers designed a program for first-aid training, and this was implemented by trained nursing students. The evaluation involved immediate post-test and follow-up assessment after two months. The results showed generally low levels of satisfactory knowledge and inadequate situational practice among the school students before the intervention. Statistically-significant improvements were shown at the post- and follow-up tests. Multivariate regression analysis identified the intervention and the type of school as the independent predictors of the change in students' knowledge score, while the intervention and the knowledge score were the predictors of the practice score. The study concluded that a first-aid training program delivered by nursing students to preparatory school children is effective in improving their knowledge and practice. © 2013 Wiley Publishing Asia Pty Ltd.

Project Integration Architecture (PIA) and Computational Analysis Programming Interface (CAPRI) for Accessing Geometry Data from CAD Files

NASA Technical Reports Server (NTRS)

Benyo, Theresa L.

2002-01-01

Integration of a supersonic inlet simulation with a computer aided design (CAD) system is demonstrated. The integration is performed using the Project Integration Architecture (PIA). PIA provides a common environment for wrapping many types of applications. Accessing geometry data from CAD files is accomplished by incorporating appropriate function calls from the Computational Analysis Programming Interface (CAPRI). CAPRI is a CAD vendor neutral programming interface that aids in acquiring geometry data directly from CAD files. The benefits of wrapping a supersonic inlet simulation into PIA using CAPRI are; direct access of geometry data, accurate capture of geometry data, automatic conversion of data units, CAD vendor neutral operation, and on-line interactive history capture. This paper describes the PIA and the CAPRI wrapper and details the supersonic inlet simulation demonstration.

Reference Lists for HECE Occupational Areas.

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Dept. of Occupational Education and Technology.

The annotated bibliography contains citations to appropriate reference books, pamphlets and audiovisual materials for the following 17 occupations: art and craft aide, bridal consultant, child care aide, clothing assistant, companion to the elderly, consumer aide, dietetic aide, fabric coordinator, fashion coordinator, floral designer, food…

Profile of Home Care Aides, Nursing Home Aides, and Hospital Aides: Historical Changes and Data Recommendations

ERIC Educational Resources Information Center

Yamada, Yoshiko

2002-01-01

Purpose: To examine demographic characteristics and work conditions of home care aides, nursing home aides, and hospital aides in the late 1980s and late 1990s. Design and Methods: This study replicated a previous study which examined the Current Population Survey (CPS) March supplement from 1987 to 1989. The present study examined CPS data from…

Quantification of Hepatorenal Index for Computer-Aided Fatty Liver Classification with Self-Organizing Map and Fuzzy Stretching from Ultrasonography.

PubMed

Kim, Kwang Baek; Kim, Chang Won

2015-01-01

Accurate measures of liver fat content are essential for investigating hepatic steatosis. For a noninvasive inexpensive ultrasonographic analysis, it is necessary to validate the quantitative assessment of liver fat content so that fully automated reliable computer-aided software can assist medical practitioners without any operator subjectivity. In this study, we attempt to quantify the hepatorenal index difference between the liver and the kidney with respect to the multiple severity status of hepatic steatosis. In order to do this, a series of carefully designed image processing techniques, including fuzzy stretching and edge tracking, are applied to extract regions of interest. Then, an unsupervised neural learning algorithm, the self-organizing map, is designed to establish characteristic clusters from the image, and the distribution of the hepatorenal index values with respect to the different levels of the fatty liver status is experimentally verified to estimate the differences in the distribution of the hepatorenal index. Such findings will be useful in building reliable computer-aided diagnostic software if combined with a good set of other characteristic feature sets and powerful machine learning classifiers in the future.

Quantification of Hepatorenal Index for Computer-Aided Fatty Liver Classification with Self-Organizing Map and Fuzzy Stretching from Ultrasonography

PubMed Central

Kim, Kwang Baek

2015-01-01

Accurate measures of liver fat content are essential for investigating hepatic steatosis. For a noninvasive inexpensive ultrasonographic analysis, it is necessary to validate the quantitative assessment of liver fat content so that fully automated reliable computer-aided software can assist medical practitioners without any operator subjectivity. In this study, we attempt to quantify the hepatorenal index difference between the liver and the kidney with respect to the multiple severity status of hepatic steatosis. In order to do this, a series of carefully designed image processing techniques, including fuzzy stretching and edge tracking, are applied to extract regions of interest. Then, an unsupervised neural learning algorithm, the self-organizing map, is designed to establish characteristic clusters from the image, and the distribution of the hepatorenal index values with respect to the different levels of the fatty liver status is experimentally verified to estimate the differences in the distribution of the hepatorenal index. Such findings will be useful in building reliable computer-aided diagnostic software if combined with a good set of other characteristic feature sets and powerful machine learning classifiers in the future. PMID:26247023

Human factors of intelligent computer aided display design

NASA Technical Reports Server (NTRS)

Hunt, R. M.

1985-01-01

Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

Analysis of Special Operations Forces in Decision Aids: Recommendations,

DTIC Science & Technology

1994-01-01

Soviet-made armored scout cars operated by Malaysian troops. By that time, the United States had lost 102 men-18 killed and 84 wounded. Somali leaders...designation of targets; attack by F-15E and F-16C using CBU-87, -89 Execution and GBU; attack by A-10 using Maverick and 30-mm cannon; attack by B-52 using...patrolling designated areas of the battlefield and attacking individual armored vehicles with precision-guided weapons such as Maverick . Discontinuity

Directory of aerospace safety specialized information sources, volume 2

NASA Technical Reports Server (NTRS)

Rubinstein, R. I.; Pinto, J. J.; Meschkow, S. Z.

1976-01-01

A handbook of organizations and experts in specific and well-defined areas of safety technology is presented. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, and operations, as well as information on hazard and failure cause identification, accident analysis, and materials characteristics. Other related areas include the handling and transportation of hazardous chemicals, radioactive isotopes, and liquified natural gases.

Optimization and Performance Analysis of a Supersonic Conical-Flow Waverider for a Deck-Launched Intercept Mission

DTIC Science & Technology

1993-06-01

radius aid 20 minutes of comibat follovcu by retum to the carrer . A conical-flow waweider served as the starting pount for the aircraft configuration. A...design, test meia adj p teat paramieter siekction were studied for planned low speed wind and water tunnel tests as well as performance predictions fir die... planned win~d tunnel tests. 14. SUBJECT TERMS 15. NUMBER OF PAGES Waveniders, Hypersonics, Aircraft Design 82 `16. PRICE CODE 17. SECURITY

Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

PubMed

Caposecco, Andrea; Hickson, Louise; Meyer, Carly

2011-12-01

A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content.

Aiding Design of Wave Energy Converters via Computational Simulations

NASA Astrophysics Data System (ADS)

Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

2015-11-01

With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

[The effects of multimedia-assisted instruction on the skin care learning of nurse aides in long-term care facilities].

PubMed

Wu, Yu-Ling; Kao, Yu-Hsiu

2014-08-01

Skin care is an important responsibility of nurse aides in long-term care facilities, and the nursing knowledge, attitudes, and skills of these aides significantly affects quality of care. However, the work schedule of nurse aides often limits their ability to obtain further education and training. Therefore, developing appropriate and effective training programs for nurse aides is critical to maintaining and improving quality of care in long-term care facilities. This study investigates the effects of multimedia assisted instruction on the skin care learning of nurse aides working in long-term care facilities. A quasi-experimental design and convenient sampling were adopted in this study. Participants included 96 nurse aides recruited from 5 long-term care facilities in Taoyuan County, Taiwan. The experimental group received 3 weeks of multimedia assisted instruction. The control group did not receive this instruction. The Skin Care Questionnaire for Nurse Aides in Long-term Care Facilities and the Skin Care Behavior Checklist were used for assessment before and after the intervention. (1) Posttest scores for skin care knowledge, attitudes, behavior, and the skin care checklist were significantly higher than pretest scores for the intervention group. There was no significant difference between pretest and posttest scores for the control group. (2) A covariance analysis of pretest scores for the two groups showed that the experimental group earned significantly higher average scores than their control group peers for skin care knowledge, attitudes, behavior, and the skin care checklist. The multimedia assisted instruction demonstrated significant and positive effects on the skin care leaning of nurse aides in long-term care facilities. This finding supports the use of multimedia assisted instruction in the education and training of nurse aides in long-term care facilities in the future.

CAD-based stand-alone spacecraft radiation exposure analysis system: An application of the early man-tended Space Station

NASA Technical Reports Server (NTRS)

Appleby, M. H.; Golightly, M. J.; Hardy, A. C.

1993-01-01

Major improvements have been completed in the approach to analyses and simulation of spacecraft radiation shielding and exposure. A computer-aided design (CAD)-based system has been developed for determining the amount of shielding provided by a spacecraft and simulating transmission of an incident radiation environment to any point within or external to the vehicle. Shielding analysis is performed using a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design programs such as a Mars transfer habitat, pressurized lunar rover, and the redesigned international Space Station. Results of analysis performed for the Space Station astronaut exposure assessment are provided to demonastrate the applicability and versatility of the system.

Classification of Computer-Aided Design-Computer-Aided Manufacturing Applications for the Reconstruction of Cranio-Maxillo-Facial Defects.

PubMed

Wauters, Lauri D J; Miguel-Moragas, Joan San; Mommaerts, Maurice Y

2015-11-01

To gain insight into the methodology of different computer-aided design-computer-aided manufacturing (CAD-CAM) applications for the reconstruction of cranio-maxillo-facial (CMF) defects. We reviewed and analyzed the available literature pertaining to CAD-CAM for use in CMF reconstruction. We proposed a classification system of the techniques of implant and cutting, drilling, and/or guiding template design and manufacturing. The system consisted of 4 classes (I-IV). These classes combine techniques used for both the implant and template to most accurately describe the methodology used. Our classification system can be widely applied. It should facilitate communication and immediate understanding of the methodology of CAD-CAM applications for the reconstruction of CMF defects.

Worst case estimation of homology design by convex analysis

NASA Technical Reports Server (NTRS)

Yoshikawa, N.; Elishakoff, Isaac; Nakagiri, S.

1998-01-01

The methodology of homology design is investigated for optimum design of advanced structures. for which the achievement of delicate tasks by the aid of active control system is demanded. The proposed formulation of homology design, based on the finite element sensitivity analysis, necessarily requires the specification of external loadings. The formulation to evaluate the worst case for homology design caused by uncertain fluctuation of loadings is presented by means of the convex model of uncertainty, in which uncertainty variables are assigned to discretized nodal forces and are confined within a conceivable convex hull given as a hyperellipse. The worst case of the distortion from objective homologous deformation is estimated by the Lagrange multiplier method searching the point to maximize the error index on the boundary of the convex hull. The validity of the proposed method is demonstrated in a numerical example using the eleven-bar truss structure.

Method for Studying Helicopter Longitudinal Maneuver Stability

NASA Technical Reports Server (NTRS)

Amer, Kenneth B

1954-01-01

A theoretical analysis of helicopter maneuver stability is made and the results are compared with experimental results for both a single and a tandem rotor helicopter. Techniques are described for measuring in flight the significant stability derivatives for use with the theory to aid in design studies of means for achieving marginal maneuver stability for a prototype helicopter.

Ideal Compliant Joints and Integration of Computer Aided Design and Analysis

DTIC Science & Technology

2013-11-17

coordinates as dxEIEA U l x xe ][ 0 T                eee Q     . (9) In the computer...generalized damping force can be written as dxIA x l x x )) 21 (( 2 0 1 d ee Q

Library and Information Resources and Users of Digital Resources in the Humanities

ERIC Educational Resources Information Center

Warwick, Claire; Terras, Melissa; Galina, Isabel; Huntington, Paul; Pappa, Nikoleta

2008-01-01

Purpose: The purpose of this article is to discuss the results of the Log Analysis of Internet Resources in the Arts and Humanities (LAIRAH) study. It aims to concentrate upon the use and importance of information resources, physical research centres and digital finding aids in scholarly research. Design/methodology/approach: Results are presented…

Implementing Welfare-Employment Programs: An Institutional Analysis of the Work Incentive (WIN) Program.

ERIC Educational Resources Information Center

Mitchell, John J.; And Others

Factors that influence the effectiveness of state and local units of the federal Work Incentive (WIN) program were examined to suggest ways to improve the program, which is designed to move recipients of Aid to Families with Dependent Children (AFDC) into productive jobs. Factors studied were organizational, managerial, and service delivery…

Toward More Critical Reviewing and Analysis of CD-ROM User Software Interfaces.

ERIC Educational Resources Information Center

Zink, Steven D.

1991-01-01

Criticizes reviews of library CD-ROM products as being uncritical of the user interface and advocates a more rigorous evaluation, not only to aid potential buyers, but as a way to influence manufacturers. Congressional Information Services' Masterfile 2 is evaluated in the context of Heckel's "Principles of Friendly Software Design." (24…

Preliminary logging analysis system (PLANS): overview.

Treesearch

R.H. Twito; S.E. Reutebuch; R.J. McGaughey; C.N. Mann

1987-01-01

The paper previews a computer-aided design system, PLANS, that is useful for developing timber harvest and road network plans on large-scale topographic maps. Earlier planning techniques are reviewed, and the advantages are explained of using advanced planning systems like PLANS. There is a brief summary of the input, output, and function of each program in the PLANS...

Mapping Points of Interest: An Analysis of Students' Engagement with Digital Primary Sources

ERIC Educational Resources Information Center

Rysavy, Monica D. T.; Michalak, Russell; Hunt, Kevin

2018-01-01

The Digital Archival Advertisements Survey Process (DAASP) model is a collaborative active learning exercise designed to aid students in evaluating primary source documents of print-based advertisements. By deploying DAASP, the researchers were able to assess the students' ability to evaluate their biases of the advertisements in a first-year…

Measurement and Analysis of Individualized Care Inventory Responses Comparing Long-Term Care Nurses and Care Aides

ERIC Educational Resources Information Center

O'Rourke, Norm; Chappell, Neena L.; Caspar, Sienna

2009-01-01

Purpose: Motivating and enabling formal caregivers to provide individualized resident care has become an increasingly important objective in long-term care (LTC) facilities. The current study set out to examine the structure of responses to the individualized care inventory (ICI). Design and Methods: Samples of 242 registered nurses (RNs)/licensed…

Design and fabrication of complete dentures using CAD/CAM technology

PubMed Central

Han, Weili; Li, Yanfeng; Zhang, Yue; lv, Yuan; Zhang, Ying; Hu, Ping; Liu, Huanyue; Ma, Zheng; Shen, Yi

2017-01-01

Abstract The aim of the study was to test the feasibility of using commercially available computer-aided design and computer-aided manufacturing (CAD/CAM) technology including 3Shape Dental System 2013 trial version, WIELAND V2.0.049 and WIELAND ZENOTEC T1 milling machine to design and fabricate complete dentures. The modeling process of full denture available in the trial version of 3Shape Dental System 2013 was used to design virtual complete dentures on the basis of 3-dimensional (3D) digital edentulous models generated from the physical models. The virtual complete dentures designed were exported to CAM software of WIELAND V2.0.049. A WIELAND ZENOTEC T1 milling machine controlled by the CAM software was used to fabricate physical dentitions and baseplates by milling acrylic resin composite plates. The physical dentitions were bonded to the corresponding baseplates to form the maxillary and mandibular complete dentures. Virtual complete dentures were successfully designed using the software through several steps including generation of 3D digital edentulous models, model analysis, arrangement of artificial teeth, trimming relief area, and occlusal adjustment. Physical dentitions and baseplates were successfully fabricated according to the designed virtual complete dentures using milling machine controlled by a CAM software. Bonding physical dentitions to the corresponding baseplates generated the final physical complete dentures. Our study demonstrated that complete dentures could be successfully designed and fabricated by using CAD/CAM. PMID:28072686

Topology optimization aided structural design: Interpretation, computational aspects and 3D printing.

PubMed

Kazakis, Georgios; Kanellopoulos, Ioannis; Sotiropoulos, Stefanos; Lagaros, Nikos D

2017-10-01

Construction industry has a major impact on the environment that we spend most of our life. Therefore, it is important that the outcome of architectural intuition performs well and complies with the design requirements. Architects usually describe as "optimal design" their choice among a rather limited set of design alternatives, dictated by their experience and intuition. However, modern design of structures requires accounting for a great number of criteria derived from multiple disciplines, often of conflicting nature. Such criteria derived from structural engineering, eco-design, bioclimatic and acoustic performance. The resulting vast number of alternatives enhances the need for computer-aided architecture in order to increase the possibility of arriving at a more preferable solution. Therefore, the incorporation of smart, automatic tools in the design process, able to further guide designer's intuition becomes even more indispensable. The principal aim of this study is to present possibilities to integrate automatic computational techniques related to topology optimization in the phase of intuition of civil structures as part of computer aided architectural design. In this direction, different aspects of a new computer aided architectural era related to the interpretation of the optimized designs, difficulties resulted from the increased computational effort and 3D printing capabilities are covered here in.

Computer-Aided Facilities Management Systems (CAFM).

ERIC Educational Resources Information Center

Cyros, Kreon L.

Computer-aided facilities management (CAFM) refers to a collection of software used with increasing frequency by facilities managers. The six major CAFM components are discussed with respect to their usefulness and popularity in facilities management applications: (1) computer-aided design; (2) computer-aided engineering; (3) decision support…

Educational Aids for Visually Handicapped.

ERIC Educational Resources Information Center

American Printing House for the Blind, Louisville, KY.

Listings specifying source and cost are provided of tactile aids and materials designed for the visually handicapped. Items are presented in the following categories: supply sources and catalogs for aids; braille devices, including duplicators, reading and writing aids, reading readiness materials, and writing machines, slates, and styluses; deaf…

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

PubMed

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

Implementation Issues for Departure Planning Systems

NASA Technical Reports Server (NTRS)

Hansman, R. John; Feron, Eric; Clarke, John-Paul; Odoni, Amedeo

1999-01-01

The objective of the proposed effort is to investigate issues associated with the design and implementation of decision aiding tools to assist in improving the departure process at congested airports. This effort follows a preliminary investigation of potential Departure Planning approaches and strategies, which identified potential benefits in departure efficiency, and also in reducing the environmental impact of aircraft in the departure queue. The preliminary study bas based, in large part, on observations and analysis of departure processes at Boston, Logan airport. The objective of this follow-on effort is to address key implementation issues and to expand the observational base to include airports with different constraints and traffic demand. Specifically, the objectives of this research are to: (1) Expand the observational base to include airports with different underlying operational dynamics. (2) Develop prototype decision aiding algorithms/approaches and assess potential benefits. and (3) Investigate Human Machine Integration (HMI) issues associated with decision aids in tower environments.

Recent sexually transmitted disease prevention efforts and their implications for AIDS health education.

PubMed

Solomon, M Z; DeJong, W

1986-01-01

In the absence of a cure or vaccine for acquired immune deficiency syndrome (AIDS) educational and social marketing efforts to reduce the transmission of Human T-lymphotropic type III/lymphadenopathy-associated virus (HTLV-III/LAV) are currently our best hope for controlling the disease. Since 1983, the Centers for Disease Control (CDC) has funded a series of research studies to determine whether education efforts can successfully motivate the adoption of key behaviors relevant to the control of a variety of sexually transmitted diseases (STDs). Analysis of the first two studies which are now completed, and preliminary data from a third study, have documented dramatic changes in behavior, knowledge, and attitudes among clients in inner-city public health clinics. The authors describe the principles and underlying assumptions that have guided the design of their STD initiatives, drawing special attention to the implications for AIDS health education efforts.

A Design of Inservice Education for Nurses' Aides in a Nursing Home Setting

ERIC Educational Resources Information Center

Hameister, Dennis R.

1977-01-01

Describes a study designed to identify the specific needs (as identified by administrators and charge nurses) of nurses' aides and to determine the appropriateness for inclusion in an inservice training program. (WL)

Radiological emergency response for community agencies with cognitive task analysis, risk analysis, and decision support framework.

PubMed

Meyer, Travis S; Muething, Joseph Z; Lima, Gustavo Amoras Souza; Torres, Breno Raemy Rangel; del Rosario, Trystyn Keia; Gomes, José Orlando; Lambert, James H

2012-01-01

Radiological nuclear emergency responders must be able to coordinate evacuation and relief efforts following the release of radioactive material into populated areas. In order to respond quickly and effectively to a nuclear emergency, high-level coordination is needed between a number of large, independent organizations, including police, military, hazmat, and transportation authorities. Given the complexity, scale, time-pressure, and potential negative consequences inherent in radiological emergency responses, tracking and communicating information that will assist decision makers during a crisis is crucial. The emergency response team at the Angra dos Reis nuclear power facility, located outside of Rio de Janeiro, Brazil, presently conducts emergency response simulations once every two years to prepare organizational leaders for real-life emergency situations. However, current exercises are conducted without the aid of electronic or software tools, resulting in possible cognitive overload and delays in decision-making. This paper describes the development of a decision support system employing systems methodologies, including cognitive task analysis and human-machine interface design. The decision support system can aid the coordination team by automating cognitive functions and improving information sharing. A prototype of the design will be evaluated by plant officials in Brazil and incorporated to a future trial run of a response simulation.

Evaluating a Computerized Aid for Conducting a Cognitive Task Analysis

DTIC Science & Technology

2000-01-01

in conducting a cognitive task analysis . The conduct of a cognitive task analysis is costly and labor intensive. As a result, a few computerized aids...evaluation of a computerized aid, specifically CAT-HCI (Cognitive Analysis Tool - Human Computer Interface), for the conduct of a detailed cognitive task analysis . A

Types of Hearing Aids

MedlinePlus

... hearing impairment. Most hearing aids share several similar electronic components, including a microphone that picks up sound; ... the ear canal; and batteries that power the electronic parts. Hearing aids differ by: design technology used ...

When product designers use perceptually based color tools

NASA Astrophysics Data System (ADS)

Bender, Walter R.

1998-07-01

Palette synthesis and analysis tools have been built based upon a model of color experience. This model adjusts formal compositional elements such as hue, value, chroma, and their contrasts, as well as size and proportion. Clothing and household product designers were given these tools to give guidance to their selection of seasonal palettes for use in production of the private-label merchandise of a large retail chain. The designers chose base palettes. Accents to these palettes were generated with and without the aid of the color tools. These palettes are compared by using perceptual metrics and interviews. The results are presented.

When product designers use perceptually based color tools

NASA Astrophysics Data System (ADS)

Bender, Walter R.

2001-01-01

Palette synthesis and analysis tools have been built based upon a model of color experience. This model adjusts formal compositional elements such as hue, value, chroma, and their contrasts, as well as size and proportion. Clothing and household product designers were given these tools to guide their selection of seasonal palettes in the production of the private-label merchandise in a large retail chain. The designers chose base palettes. Accents to these palettes were generated with and without the aid of the color tools. These palettes are compared by using perceptual metrics and interviews. The results are presented.

BROAD SPECTRUM ANALYSIS FOR TRACE ORGANIC POLLUTANTS IN LARGE VOLUMES OF WATER BY XAD RESINS-COLUMN DESIGN-FACTS AND MYTHS.

USGS Publications Warehouse

Gibs, J.; Wicklund, A.; Suffet, I.H.

1986-01-01

The 'rule of thumb' that large volumes of water can be sampled for trace organic pollutants by XAD resin columns which are designed by small column laboratory studies or pure compounds is examined and shown to be a problem. A theory of multicomponent breakthrough is presented as a frame of reference to help solve the problem and develop useable criteria to aid the design of resin columns. An important part of the theory is the effect of humic substances on the breakthrough character of multicomponent chemical systems.

Project Hill-Climb: Drafting and Design in Motion

ERIC Educational Resources Information Center

Crowl, William F.

2008-01-01

This article describes the Hill-Climb project of a second level Computer-Aided Drafting and Design (CADD) class. The author primarily designed the activity to increase student understanding of the assembly drawing process and its components. The emphasis on problem solving adds a dimension that can aid students in their other classes as well. By…

Field trials of medical decision-aids: potential problems and solutions.

PubMed Central

Wyatt, J.; Spiegelhalter, D.

1991-01-01

Only clinical trials can assess the impact of prototype medical decision-aids, but they are seldom performed before dissemination. Many problems are encountered when designing such studies, including ensuring generality, deciding what to measure, feasible study designs, correcting for biases caused by the trial itself and by the decision-aid, resolving the "Evaluation Paradox", and potential legal and ethical doubts. These are discussed in this paper. PMID:1807610

Uncertainty management in intelligent design aiding systems

NASA Technical Reports Server (NTRS)

Brown, Donald E.; Gabbert, Paula S.

1988-01-01

A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

Kansas Nursing Home Medication Aide Curriculum. Revised.

ERIC Educational Resources Information Center

Bartel, Myrna J.; Fornelli, Linda K.

This curriculum guide is designed to aid Kansas instructors in conducting a course for teaching nursing home medication aides. Covered first are various introductory topics such as the role and responsibilities of medication aides, pharmacodynamics, forms in which medication is now available, common medical abbreviations, mathematics and weights…

Instructional Aides: Employment, Payroll Procedures, Supervision, Performance Appraisal, Legal Aspects.

ERIC Educational Resources Information Center

Nielsen, Earl T.

Designed to assist school administrators in their efforts to secure, train, and retain the most qualified instructional aides available, the monograph discusses procedures for employment, payroll processing, aide supervision, performance appraisal, and legal aspects involved in the hiring of instructional aides. Specific topics include…

Reimagining Financial Aid to Improve Student Access and Outcomes

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators (NJ1), 2013

2013-01-01

As the student aid programs rapidly approach reauthorization in 2014, they continue to face severe funding and efficiency problems. With grant assistance from the Bill & Melinda Gates Foundation through their "Reimagining Aid Design and Delivery" (RADD) project, the National Association of Student Financial Aid Administrators…

Proceedings of the NATO-Advanced Study Institute on Computer Aided Analysis of Rigid and Flexible Mechanical Systems. Volume 1: Main lectures

NASA Astrophysics Data System (ADS)

Pereira, Manuel S.; Ambrosio, Jorge A. C.

1993-07-01

During the last few years, major scientific progress has been achieved in fields related to computer aided analysis of multibody systems. In view of this progress and recent developments of computer hardware and general purpose software, there is a need to access the current state of art and results from different schools of thought, with the objective of focussing trends in future research. Going back to 1983 when an important NATO-NSF-ARO Advanced Study Institute on Computer Aided Analysis and Optimization of Mechanical Systems was held at the University of Iowa, one may notice that less then 10 years ago the state of art was mainly dwelling on rigid body dynamics. The interest in the dynamic simulation of mechanical systems has steadily increased in recent years coming mainly from the aerospace and automative industries. The development of multibody system analysis formulations have been more recently motivated with the need to include several features such as: real-time simulation capabilities, highly non-linear control devices, work space path planing, active control of machine flexibilities and reliability and accuracy in the analysis results. The need for accurate and efficient analysis tools for design of large and lightweight mechanical systems has driven many research groups in the challenging problem of flexible systems with an increasing interaction with finite element methodologies. Basic approaches to mechanical systems dynamic analysis have recently been presented in several new text books. These publications demonstrate that both recursive and absolute methods still have their proponents to resolve the redundancy encountered in most mechanical systems.

Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application. Phase 3 Summary report: Shear web component testing and analysis

NASA Technical Reports Server (NTRS)

Laakso, J. H.; Straayer, J. W.

1973-01-01

Three large scale advanced composite shear web components were tested and analyzed to evaluate application of the design concept to a space shuttle orbiter thrust structure. The shear web design concept consisted of a titanium-clad + or - 45 deg boron/epoxy web laminate stiffened with vertical boron/epoxy reinforced aluminum stiffeners. The design concept was evaluated to be efficient and practical for the application that was studied. Because of the effects of buckling deflections, a requirement is identified for shear buckling resistant design to maximize the efficiency of highly-loaded advanced composite shear webs. An approximate analysis of prebuckling deflections is presented and computer-aided design results, which consider prebuckling deformations, indicate that the design concept offers a theoretical weight saving of 31 percent relative to all metal construction. Recommendations are made for design concept options and analytical methods that are appropriate for production hardware.

WINCADRE (COMPUTER-AIDED DATA REVIEW AND EVALUATION)

EPA Science Inventory

WinCADRE (Computer-Aided Data Review and Evaluation) is a Windows -based program designed for computer-assisted data validation. WinCADRE is a powerful tool which significantly decreases data validation turnaround time. The electronic-data-deliverable format has been designed ...

A structural analysis of an ocean going patrol boat subjected to planning loads

NASA Technical Reports Server (NTRS)

Clark, James H.; Lafreniere, Robert; Stoodt, Robert; Wiedenheft, John

1987-01-01

A static structural analysis of an ocean going patrol vessel subjected to hydrodynamic planning loads is discussed. The analysis required the development of a detailed model that included hull plating, five structural bulkheads, longitudinal and transverse stiffners, and a coarse representation of the superstructure. The finite element model was developed from fabrication drawings using the Navy computer aided design system. Various stress and displacement contours are shown for the entire hull. Because several critical areas appeared to be overstressed, these areas were remeshed for detail and are presented for completeness.

Audio-Visual Aids for Pre-School and Primary School Children. A Training Document. Aids to Programming UNICEF Assistance to Education.

ERIC Educational Resources Information Center

Narayan, Shankar

This discussion of the importance and scope of audiovisual aids in the educational programs and activities designed for children in developing countries includes the significance of audiovisual aids in pre-school and primary school education, types of audiovisual aids, learning from pictures, creative art materials, play materials, and problems…

Teaching Basic First-Aid Skills against Home Accidents to Children with Autism through Video Modeling

ERIC Educational Resources Information Center

Ergenekon, Yasemin

2012-01-01

It is known that children with DD can learn first-aid skills and use whenever needed. Applying first-aid skills was taught to three inclusion students with autism through "first-aid skills training package". In the study multiple probe design with probe trials across behaviors was used. The findings indicated that first-aid skills…

Indicators of satisfaction in clickers-aided EFL class.

PubMed

Yu, Zhonggen

2015-01-01

How to identify whether students are satisfied with clickers-aided EFL class might be largely a mystery for most researchers since satisfaction is deeply hidden in human psychology which is subtle and intangible. This study, by using bivariate correlation analysis and structural equation modeling, survey scales claimed both valid and internally consistent, and data collected from randomly selected 227 participants, explored the indicators of satisfaction in clickers-aided EFL class, together with gender differences in the indicators. It was concluded that satisfaction was positively correlated with interaction, self-efficacy and self-regulation in clickers-aided EFL class without statistically significant gender differences. Furthermore, interaction, self-efficacy and self-regulation were mutually and significantly correlated. Although indicators of satisfaction might not be limited to these three factors, the findings should be helpful to future researchers who desire to determine whether users are satisfied with the polling technology. Then teachers could decide what teaching style and contents should be adopted. In order to satisfy users of clickers, future lecturing might be designed to promote peer interaction, self-efficacy and self-regulation.

Indicators of satisfaction in clickers-aided EFL class

PubMed Central

Yu, Zhonggen

2015-01-01

How to identify whether students are satisfied with clickers-aided EFL class might be largely a mystery for most researchers since satisfaction is deeply hidden in human psychology which is subtle and intangible. This study, by using bivariate correlation analysis and structural equation modeling, survey scales claimed both valid and internally consistent, and data collected from randomly selected 227 participants, explored the indicators of satisfaction in clickers-aided EFL class, together with gender differences in the indicators. It was concluded that satisfaction was positively correlated with interaction, self-efficacy and self-regulation in clickers-aided EFL class without statistically significant gender differences. Furthermore, interaction, self-efficacy and self-regulation were mutually and significantly correlated. Although indicators of satisfaction might not be limited to these three factors, the findings should be helpful to future researchers who desire to determine whether users are satisfied with the polling technology. Then teachers could decide what teaching style and contents should be adopted. In order to satisfy users of clickers, future lecturing might be designed to promote peer interaction, self-efficacy and self-regulation. PMID:25999898

Socio-Demographic Factors, Social Support, Quality of Life, and HIV/AIDS in Ghana.

PubMed

Abrefa-Gyan, Tina; Cornelius, Llewellyn J; Okundaye, Joshua

2016-01-01

The increase in the access to biomedical interventions for people living with HIV/AIDS in the developing world has not been adequately matched with the requisite psychosocial treatments to help improve the effectiveness of biomedical interventions. Therefore, in this study the author seeks to determine whether socio-demographic characteristics and social support are associated with quality of life in individuals diagnosed with HIV/AIDS in Ghana. A convenience sample of 300 HIV/AIDS support group members was obtained via cross-sectional design survey. The Medical Outcome Studies (MOS) HIV Health Survey, the MOS Social Support Survey (MOS-SSS), and demographic questionnaire instruments were used to assess quality of life, social support, and demographic information respectively. Multiple regression analysis showed that there was a positive association between overall social support and overall quality of life (r = .51). It also showed that being younger, male, attending support group meetings for over a year, and having ≥ 13 years of schooling related to higher quality of life. Implications of the findings for practice, policy, and research in Ghana and the rest of the developing world are discussed.

SAMO (Sistema de Apoyo Mechanizado a la Operacion): An operational aids computer system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stormer, T.D.; Laflor, E.V.

1989-01-01

SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequencemore » of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation.« less

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

PubMed

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

Estimation of risk of cancers before occurrence of acquired immunodeficiency syndrome in persons infected with human immunodeficiency virus.

PubMed

Li, Yueming; Law, Matthew; McDonald, Ann; Correll, Patty; Kaldor, John M; Grulich, Andrew E

2002-01-15

There is methodological debate as to whether cohorts defined by acquired immunodeficiency syndrome (AIDS) diagnosis can be used to estimate risks of cancer in persons with human immunodeficiency virus (HIV) before AIDS. The authors compared risks of non-AIDS-defining cancers before AIDS in persons with HIV using a cohort based on AIDS diagnosis and a second cohort based on HIV diagnosis. National population-based registries of AIDS and HIV diagnoses to August 1999 were matched separately with the National Cancer Registry in Australia. Four analyses were performed. In analysis 1, follow-up was from 5 years before AIDS registration in 8,118 persons with AIDS. Analysis 2 was similar but adjusted expected numbers of cancers for decreased survival. Analysis 3 was based on 7,061 persons registered with HIV, with follow-up from the reported date of diagnosis. Analysis 4 was based on 2,112 AIDS cases previously reported with HIV, with follow-up from 5 years before AIDS diagnosis. In all analyses, follow-up ended at cancer diagnosis, death, 6 months before AIDS, or the end of available cancer data, whichever occurred first. For 10 types of cancer there were at least three cases in any one of the analyses. For these cancers there was no systematic pattern such that one analysis produced consistently higher or lower estimates than the others. These analyses suggest that cancer risk in persons with HIV before AIDS diagnosis may be estimated reliably based on cancer experience 5 years before AIDS.

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

NASA Technical Reports Server (NTRS)

Min, James B.

2005-01-01

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

Reimagining Financial Aid to Improve Student Access and Outcomes. Executive Summary

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators (NJ1), 2013

2013-01-01

As the student aid programs rapidly approach reauthorization in 2014, they continue to face severe funding and efficiency problems. With grant assistance from the Bill & Melinda Gates Foundation through their "Reimagining Aid Design and Delivery" (RADD) project, the National Association of Student Financial Aid Administrators (NASFAA) examined…

Decision support aids with anthropomorphic characteristics influence trust and performance in younger and older adults.

PubMed

Pak, Richard; Fink, Nicole; Price, Margaux; Bass, Brock; Sturre, Lindsay

2012-01-01

This study examined the use of deliberately anthropomorphic automation on younger and older adults' trust, dependence and performance on a diabetes decision-making task. Research with anthropomorphic interface agents has shown mixed effects in judgments of preferences but has rarely examined effects on performance. Meanwhile, research in automation has shown some forms of anthropomorphism (e.g. etiquette) have effects on trust and dependence on automation. Participants answered diabetes questions with no-aid, a non-anthropomorphic aid or an anthropomorphised aid. Trust and dependence in the aid was measured. A minimally anthropomorphic aide primarily affected younger adults' trust in the aid. Dependence, however, for both age groups was influenced by the anthropomorphic aid. Automation that deliberately embodies person-like characteristics can influence trust and dependence on reasonably reliable automation. However, further research is necessary to better understand the specific aspects of the aid that affect different age groups. Automation that embodies human-like characteristics may be useful in situations where there is under-utilisation of reasonably reliable aids by enhancing trust and dependence in that aid. Practitioner Summary: The design of decision-support aids on consumer devices (e.g. smartphones) may influence the level of trust that users place in that system and their amount of use. This study is the first step in articulating how the design of aids may influence user's trust and use of such systems.

Preentry communication design elements for outer planets atmospheric entry probe

NASA Technical Reports Server (NTRS)

1976-01-01

Four related tasks are discussed for data transmission from a probe prior to entering the atmosphere of Jupiter to an orbiting spacecraft in a trajectory past the planet: (1) link analysis and design; (2) system conceptual design; (3) Doppler measurement analysis; and (4) an electronically despun antenna. For tasks 1, 3, and 4, an analytical approach was developed and combined with computational capability available to produce quantitative results corresponding to requirements and constraints given by NASA, ARC. One constraint having a major impact on the numerical results of the link analysis was the assumption of a nonsteerable antenna on a spinning orbiter. Other constraints included the interplanetary trajectory and the approach trajectory. Because the Jupiter Orbiter Probe (JOP) program is currently in a state of evolution, all requirements and constraints applied during this study are subject to change. However, the relationships of parameters as developed will remain valid and will aid in planning Jupiter missions.

A Historical Perspective on Digital Hearing Aids: How Digital Technology Has Changed Modern Hearing Aids

PubMed Central

Levitt, Harry

2007-01-01

This article provides the author's perspective on the development of digital hearing aids and how digital signal processing approaches have led to changes in hearing aid design. Major landmarks in the evolution of digital technology are identified, and their impact on the development of digital hearing aids is discussed. Differences between analog and digital approaches to signal processing in hearing aids are identified. PMID:17301334

Case-Based Capture and Reuse of Aerospace Design Rationale

NASA Technical Reports Server (NTRS)

Leake, David B.

2001-01-01

The goal of this project was to apply artificial intelligence techniques to facilitate capture and reuse of aerospace design rationale. The project combined case-based reasoning (CBR) and concept maps (CMaps) to develop methods for capturing, organizing, and interactively accessing records of experiences encapsulating the methods and rationale underlying expert aerospace design, in order to bring the captured knowledge to bear to support future reasoning. The project's results contribute both principles and methods for effective design-aiding systems that aid capture and access of useful design knowledge. The project has been guided by the tenets that design-aiding systems must: (1) Leverage a designer's knowledge, rather than attempting to replace it; (2) Be able to reflect different designers' differing conceptualizations of the design task, and to clarify those conceptualizations to others; (3) Include capabilities to capture information both by interactive knowledge modeling and during normal use; and (4) Integrate into normal designer tasks as naturally and unobtrusive as possible.

Aid for Trade: an opportunity to increase fruit and vegetable supply

PubMed Central

Priyadarshi, Shishir

2013-01-01

Abstract Low fruit and vegetable consumption is an important contributor to the global burden of disease. In the wake of the United Nations High-level Meeting on Non-Communicable Diseases (NCDs), held in September 2011, a rise in the consumption of fruits and vegetables is foreseeable and this increased demand will have to be met through improved supply. The World Health Organization, the Food and Agriculture Organization and the World Bank have highlighted the potential for developing countries to benefit nutritionally and economically from the increased production and export of fruit and vegetables. Aid for Trade, launched in 2005 as an initiative designed to link development aid and trade holistically, offers an opportunity for the health and trade sectors to work jointly to enhance health and development. The Aid for Trade work programme stresses the importance of policy coherence across sectors, yet the commonality of purpose driving the Aid for Trade initiative and NCD prevention efforts has not been explored. In this paper food supply chain analysis was used to show health policy-makers that Aid for Trade can provide a mechanism for increasing the supply of fruits and vegetables in developing countries. Aid for Trade is an existing funding channel with clear accountability and reporting mechanisms, but its priorities are determined with little or no input from the health sector. The paper seeks to enable public health policy-makers, practitioners and advocates to improve coherence between trade and public health policies by highlighting Aid for Trade’s potential role in this endeavour. PMID:23397351

Development of a unified web-based national HIV/AIDS information system in China

PubMed Central

Mao, Yurong; Wu, Zunyou; Poundstone, Katharine; Wang, Changhe; Qin, Qianqian; Ma, Ye; Ma, Wei

2010-01-01

Background In the past, many data collection systems were in operation for different HIV/AIDS projects in China. We describe the creation of a unified, web-based national HIV/AIDS information system designed to streamline data collection and facilitate data use. Methods Integration of separate HIV/AIDS data systems was carried out in three phases. Phase 1, from January 2006 to December 2007, involved creating a set of unified data collection forms that took into account existing program needs and the reporting requirements of various international organizations. Phase 2, from January to October 2007, involved creating a web-based platform to host the integrated HIV/AIDS data collection system. Phase 3, from November to December 2007, involved pilot testing the new, integrated system prior to nationwide application. Results Eight web-based data collection subsystems based on one platform began operation on 1 January 2008. These eight subsystems cover: (i) HIV/AIDS case reporting; (ii) HIV testing and counselling; (iii) antiretroviral treatment (ART) for adults; (iv) ART for children; (v) behavioural interventions for high-risk groups; (vi) methadone maintenance treatment; (vii) sentinel and behavioural surveillance; and (viii) local county background information. The system provides real-time data to monitor HIV testing, prevention and treatment programs across the country. Conclusion China’s new unified, web-based HIV/AIDS information system has improved the efficiency of data collection, reporting, analysis and use, as well as data quality and security. It is a powerful tool to support policy making, program evaluation and implementation of the national HIV/AIDS program and, thus, may serve a model for other countries. PMID:21113041

Development of a patient decision aid for prevention of myocardial infarction in type 2 diabetes - rationale, design and pilot testing.

PubMed

Lenz, Matthias; Kasper, Jürgen; Mühlhauser, Ingrid

2009-10-19

Development and testing of a decision aid about prevention of myocardial infarction for persons with type 2 diabetes. Development and testing were guided by the UK Medical Research Council's guidance for the development and evaluation of complex interventions. This comprised a systematic literature review, a focus group of 9 potential providers, modelling a prototype, interviews to qualitatively explore understanding and additional information needs, and revision of the decision aid. The decision aid includes evidence-based information, a tool for individual risk-assessment, worksheets, and an action plan. Five diabetes educators and 15 patients underwent two 60-minutes face-to-face interviews, firstly browsing the decision aid for the first time and then after using it. Both groups differed in their ratings. Overall, the decision aid was rated to present essential information in a complex but understandable and unbiased manner. Difficulties involved understanding of terminology and risk interpretation. "Social status as a risk factor" was the most challenged content by educators but considered as highly important by patients. The risk assessment tool was used inadequately. 5 patients allocated themselves into false risk categories. After revision of the tool, all 12 patients who were recruited for reassessment used the tool correctly. The decision aid was evaluated with diabetes educators and patients. Qualitative data analysis revealed aspects for revision. The decision aid is planned to be part of a shared decision making programme, comprising a strategy for patient counselling and educational modules addressed to providers. Quantitative evaluation is required to assess its effectiveness.

On the utilization of engineering knowledge in design optimization

NASA Technical Reports Server (NTRS)

Papalambros, P.

1984-01-01

Some current research work conducted at the University of Michigan is described to illustrate efforts for incorporating knowledge in optimization in a nontraditional way. The incorporation of available knowledge in a logic structure is examined in two circumstances. The first examines the possibility of introducing global design information in a local active set strategy implemented during the iterations of projection-type algorithms for nonlinearly constrained problems. The technique used algorithms for nonlinearly constrained problems. The technique used combines global and local monotinicity analysis of the objective and constraint functions. The second examines a knowledge-based program which aids the user to create condigurations that are most desirable from the manufacturing assembly viewpoint. The data bank used is the classification scheme suggested by Boothroyd. The important aspect of this program is that it is an aid for synthesis intended for use in the design concept phase in a way similar to the so-called idea-triggers in creativity-enhancement techniques like brain-storming. The idea generation, however, is not random but it is driven by the goal of achieving the best acceptable configuration.

Investigation of air transportation technology at Ohio University, 1980. [general aviation aircraft and navigation aids

NASA Technical Reports Server (NTRS)

Mcfarland, R. H.

1981-01-01

Specific configurations of first and second order all digital phase locked loops were analyzed for both ideal and additive gaussian noise inputs. In addition, a design for a hardware digital phase locked loop capable of either first or second order operation was evaluated along with appropriate experimental data obtained from testing of the hardware loop. All parameters chosen for the analysis and the design of the digital phase locked loop were consistent with an application to an Omega navigation receiver although neither the analysis nor the design are limited to this application. For all cases tested, the experimental data showed close agreement with the analytical results indicating that the Markov chain model for first and second order digital phase locked loops are valid.

Rocketdyne PSAM: In-house enhancement/application

NASA Technical Reports Server (NTRS)

Newell, J. F.; Rajagopal, K. R.; Ohara, K.

1991-01-01

The development was initiated of the Probabilistic Design Analysis (PDA) Process for rocket engines. This will enable engineers a quantitative assessment of calculated reliability during the design process. The PDA will help choose better designs, make them more robust, and help decide on critical tests to help demonstrate key reliability issues to aid in improving the confidence of the engine capabilities. Rockedyne's involvement with the Composite Loads Spectra (CLS) and Probabilistic Structural Analysis Methodology (PSAM) contracts started this effort and are key elements in the on-going developments. Internal development efforts and hardware applications complement and extend the CLS and PSAM efforts. The completion of the CLS option work and the follow-on PSAM developments will also be integral parts of this methodology. A brief summary of these efforts is presented.

78 FR 5459 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

...] Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding... CAHPS[supreg] Survey Design Principles and implementation instructions will be based on those for CAHPS... 26, 2013. ADDRESSES: In responding to this solicitation, please reply via email to AmbSurgSurvey@cms...

Use of photography to support the learning process of science teachers of ninth through twelfth grades in the schools of Kuwait

NASA Astrophysics Data System (ADS)

Alenizi, Abdulaziz

The purpose of the study was to investigate the relevance of teachers in Kuwait when utilizing photographic aids in the classroom. Specifically, this study assessed learning outcomes of teachers amongst high school students in schools at Kuwait. The learning outcomes were then compared with teachers who are barred from using photographic aids. The research utilized a descriptive quantitative research design. The number of participants was limited to an acceptable number in the range of 250--300. Data were collected through a questionnaire and analyses were conducted using various types of statistical designs for interpretation, specifically Spearman correlation analysis. The study revealed that visual media such as images and photographs made it easy for the students to understand the concepts of science subjects, specifically biology, physics, and chemistry. Visual media should be included in the curriculum to enhance the comprehension level of students. The government of Kuwaiti, therefore, should to encourage the use of visual aids in schools to enhance learning. The research did not indicate a capacity of skills students and teachers can employ effectively when using visual aids. There also remains a gap between possessing the skills and applying them in the school. Benefits associated with visuals aids in teaching are evident in the study. With the adoption of audio-visual methods of learning, students are presented with opportunities to develop their own ideas and opinions, thus boosting their own interpersonal skills while at the same time questioning the authenticity and relevance of the concepts at hand. The major merit of audio-visual platforms in classroom learning is they cause students to break complex science concepts into finer components that can be easily understood.

A framework for development of an intelligent system for design and manufacturing of stamping dies

NASA Astrophysics Data System (ADS)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Computer aided systems human engineering: A hypermedia tool

NASA Technical Reports Server (NTRS)

Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

1992-01-01

The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

Herbal compatibility of traditional Chinese medical formulas for acquired immunodeficiency syndrome.

PubMed

Cui, Meng; Li, Jinghua; Li, Haiyan; Song, Chunxin

2012-09-01

Because herbal compatibility is one of the most important reasons why Traditional Chinese Medcine (TCM) formulas are effective for acquired immunodeficiency syndrome (AIDS), our study aimed to determine the compatibility of herbs based on published AIDS clinical research in Chinese periodicals. To achieve this aim, we designed a new data-mining algorithm according to TCM data characteristics. We found 25 clinical AIDS studies, all using Chinese herbs for treatment, in the Traditional Chinese Medicine Database System, and information on diagnosis and treatment was extracted. To find out herbal compatibility, especially the formulae for herbal combinations, we proposed an improved association rule algorithm based on the frequency of combinations. In this algorithm, all the compatibility relationships were displayed in a tree structure, by which the relationship between formulas and their derivation could be clearly inferred. Data analysis showed that approximately 100 herbs have been used for treating AIDS. Based on the whole herb compatibility tree, we calculated a basic formula for AIDS: Huang Qi combined with Ren Shen, Fu Ling, Bai Zhu, Bai Zhu, Dang Gui, and Bai Shao. This formula, deriving from most of clinical prescriptions, and was chosed by most of clinicians for AIDS treatment. From data mining we found that Qi replenishment and detoxification were the main treatment principles, which coincided with the AIDS pathological mechanism in which immune function is destroyed by human immunodeficiency virus (HIV). Our data-mining results suggest that the core TCM treatment of AIDS is replenishing Qi and detoxification, by which AIDS patients' immune system may be enhanced. Compatibility of Huang Qi with some frequently-used herbs have shown real efficacy in clinical practice, which warrants pharmacological research in the future.

Specification, Design, and Analysis of Advanced HUMS Architectures

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi

2004-01-01

During the two-year project period, we have worked on several aspects of domain-specific architectures for HUMS. In particular, we looked at using scenario-based approach for the design and designed a language for describing such architectures. The language is now being used in all aspects of our HUMS design. In particular, we have made contributions in the following areas. 1) We have employed scenarios in the development of HUMS in three main areas. They are: (a) To improve reusability by using scenarios as a library indexing tool and as a domain analysis tool; (b) To improve maintainability by recording design rationales from two perspectives - problem domain and solution domain; (c) To evaluate the software architecture. 2) We have defined a new architectural language called HADL or HUMS Architectural Definition Language. It is a customized version of xArch/xADL. It is based on XML and, hence, is easily portable from domain to domain, application to application, and machine to machine. Specifications written in HADL can be easily read and parsed using the currently available XML parsers. Thus, there is no need to develop a plethora of software to support HADL. 3) We have developed an automated design process that involves two main techniques: (a) Selection of solutions from a large space of designs; (b) Synthesis of designs. However, the automation process is not an absolute Artificial Intelligence (AI) approach though it uses a knowledge-based system that epitomizes a specific HUMS domain. The process uses a database of solutions as an aid to solve the problems rather than creating a new design in the literal sense. Since searching is adopted as the main technique, the challenges involved are: (a) To minimize the effort in searching the database where a very large number of possibilities exist; (b) To develop representations that could conveniently allow us to depict design knowledge evolved over many years; (c) To capture the required information that aid the automation process.

A qualitative insight of HIV/AIDS patients' perspective on disease and disclosure.

PubMed

Syed, Imran Ahmed; Syed Sulaiman, Syed Azhar; Hassali, Mohammad Azmi; Thiruchelvum, Kaeshalya; Lee, Christopher K C

2015-12-01

Understanding patients' knowledge and belief towards disease could play a vital role from an outcome perspective of disease management and HIV/AIDS patients are not exception to that. Qualitative methodology was used to explore Malaysian HIV/AIDS patients' perspectives on disease and status disclosure. A semi structured interview guide was used to interview the patients and a saturation point was reached after the 13th interview. All interviews were audio-recorded and subjected to a standard content analysis framework. Understandings and beliefs towards HIV/AIDS and Perspective on disease disclosures were two main themes derived from patients' data. Beliefs towards causes and cure emerged as sub-themes under disease understandings while reasons for disclosure and non-disclosure were resulted as main sub-themes under disease disclosure. Majority of patients apprehended HIV/AIDS and its causes to acceptable extent, there were elements of spirituality and lack of education involved with such understandings. Though beliefs existed that knowing status is better than being ignorant, fear of stigma and discrimination, social consequences and family emotions were found important elements linked to disease non-disclosure. The outcomes provided basic information about patients' perceptions towards disease and status disclosure among HIV/AIDS patients which can help in the designing and improvising existing strategies to enhance disease awareness and acceptance and will also serve as baseline data for future research further focusing on this subject. © 2014 John Wiley & Sons Ltd.

Application experience with the NASA aircraft interrogation and display system - A ground-support equipment for digital flight systems

NASA Technical Reports Server (NTRS)

Glover, R. D.

1983-01-01

The NASA Dryden Flight Research Facility has developed a microprocessor-based, user-programmable, general-purpose aircraft interrogation and display system (AIDS). The hardware and software of this ground-support equipment have been designed to permit diverse applications in support of aircraft digital flight-control systems and simulation facilities. AIDS is often employed to provide engineering-units display of internal digital system parameters during development and qualification testing. Such visibility into the system under test has proved to be a key element in the final qualification testing of aircraft digital flight-control systems. Three first-generation 8-bit units are now in service in support of several research aircraft projects, and user acceptance has been high. A second-generation design, extended AIDS (XAIDS), incorporating multiple 16-bit processors, is now being developed to support the forward swept wing aircraft project (X-29A). This paper outlines the AIDS concept, summarizes AIDS operational experience, and describes the planned XAIDS design and mechanization.