Science.gov

Sample records for aided design system

  1. Computer-aided system design

    NASA Technical Reports Server (NTRS)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  2. Uncertainty management in intelligent design aiding systems

    NASA Technical Reports Server (NTRS)

    Brown, Donald E.; Gabbert, Paula S.

    1988-01-01

    A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

  3. A rule based computer aided design system

    NASA Technical Reports Server (NTRS)

    Premack, T.

    1986-01-01

    A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

  4. Computer-aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1997-12-16

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

  5. Artwork Interactive Design System (AIDS) program description

    NASA Technical Reports Server (NTRS)

    Johnson, B. T.; Taylor, J. F.

    1976-01-01

    An artwork interactive design system is described which provides the microelectronic circuit designer/engineer a tool to perform circuit design, automatic layout modification, standard cell design, and artwork verification at a graphics computer terminal using a graphics tablet at the designer/computer interface.

  6. Software For Computer-Aided Design Of Control Systems

    NASA Technical Reports Server (NTRS)

    Wette, Matthew

    1994-01-01

    Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

  7. Interactive graphical computer-aided design system

    NASA Technical Reports Server (NTRS)

    Edge, T. M.

    1975-01-01

    System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.

  8. PLAID- A COMPUTER AIDED DESIGN SYSTEM

    NASA Technical Reports Server (NTRS)

    Brown, J. W.

    1994-01-01

    PLAID is a three-dimensional Computer Aided Design (CAD) system which enables the user to interactively construct, manipulate, and display sets of highly complex geometric models. PLAID was initially developed by NASA to assist in the design of Space Shuttle crewstation panels, and the detection of payload object collisions. It has evolved into a more general program for convenient use in many engineering applications. Special effort was made to incorporate CAD techniques and features which minimize the users workload in designing and managing PLAID models. PLAID consists of three major modules: the Primitive Object Generator (BUILD), the Composite Object Generator (COG), and the DISPLAY Processor. The BUILD module provides a means of constructing simple geometric objects called primitives. The primitives are created from polygons which are defined either explicitly by vertex coordinates, or graphically by use of terminal crosshairs or a digitizer. Solid objects are constructed by combining, rotating, or translating the polygons. Corner rounding, hole punching, milling, and contouring are special features available in BUILD. The COG module hierarchically organizes and manipulates primitives and other previously defined COG objects to form complex assemblies. The composite object is constructed by applying transformations to simpler objects. The transformations which can be applied are scalings, rotations, and translations. These transformations may be defined explicitly or defined graphically using the interactive COG commands. The DISPLAY module enables the user to view COG assemblies from arbitrary viewpoints (inside or outside the object) both in wireframe and hidden line renderings. The PLAID projection of a three-dimensional object can be either orthographic or with perspective. A conflict analysis option enables detection of spatial conflicts or collisions. DISPLAY provides camera functions to simulate a view of the model through different lenses. Other

  9. Computer-aided design of flight control systems

    NASA Technical Reports Server (NTRS)

    Stengel, Robert F.; Sircar, Subrata

    1991-01-01

    A computer program is presented for facilitating the development and assessment of flight control systems, and application to a control design is discussed. The program is a computer-aided control-system design program based on direct digital synthesis of a proportional-integral-filter controller with scheduled linear-quadratic-Gaussian gains and command generator tracking of pilot inputs. The FlightCAD system concentrates on aircraft dynamics, flight-control systems, stability and performance, and has practical engineering applications.

  10. Computer-Aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1996-05-03

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This system is defined as a Commercial-Off the-Shelf computer dispatching system providing both text and graphical display information while interfacing with the diverse reporting system within the Hanford Facility. This system also provided expansion capabilities to integrate Hanford Fire and the Occurrence Notification Center and provides back-up capabilities for the Plutonium Processing Facility.

  11. Computer-Aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1996-09-27

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This document outlines the negotiated requirements as agreed to by GTE Northwest during technical contract discussions. This system defines a commercial off-the-shelf computer dispatching system providing both test and graphic display information while interfacing with diverse alarm reporting system within the Hanford Site. This system provided expansion capability to integrate Hanford Fire and the Occurrence Notification Center. The system also provided back-up capability for the Plutonium Processing Facility (PFP).

  12. Information technology aided exploration of system design spaces

    NASA Technical Reports Server (NTRS)

    Feather, Martin S.; Kiper, James D.; Kalafat, Selcuk

    2004-01-01

    We report on a practical application of information technology techniques to aid system engineers effectively explore large design spaces. We make use of heuristic search, visualization and data mining, the combination of which we have implemented wtihin a risk management tool in use at JPL and NASA.

  13. Program Aids Design Of Fluid-Circulating Systems

    NASA Technical Reports Server (NTRS)

    Bacskay, Allen; Dalee, Robert

    1992-01-01

    Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

  14. CATIA - A computer aided design and manufacturing tridimensional system

    NASA Astrophysics Data System (ADS)

    Bernard, F.

    A properietary computer graphics-aided, three-dimensional interactive application (CATIA) design system is described. CATIA employs approximately 100 graphics displays, which are used by some 500 persons engaged in the definition of aircraft structures, structural strength analyses, the kinematic analysis of mobile elements, aerodynamic calculations, the choice of tooling in the machining of aircraft elements, and the programming of robotics. CATIA covers these diverse fields with a single data base. After a description of salient aspects of the system's hardware and software, graphics examples are given of the definition of curves, surfaces, complex volumes, and analytical tasks.

  15. Calculator program aids sucker-rod systems design and optimization

    SciTech Connect

    Engineer, R.; Davis, C.; Knight, R.

    1983-08-01

    Given a few basic well parameters, the engineer may follow the step-by-step procedure for programming the design of sucker rod pumping systems for oil wells deeper than 2,000 ft using the HP-41 CV hand calculator.

  16. Designing State Aid Formulas

    ERIC Educational Resources Information Center

    Zhao, Bo; Bradbury, Katharine

    2009-01-01

    This paper designs a new equalization-aid formula based on fiscal gaps of local communities. When states are in transition to a new local aid formula, the issue of whether and how to hold existing aid harmless poses a challenge. The authors show that some previous studies and the formulas derived from them give differential weights to existing and…

  17. The state of PC-based CADD (computer-aided design and drafting) systems

    SciTech Connect

    Brandt, G.L.; Bowers, J.M.; Gorman, T.S.; Taylor, L.E.

    1988-07-11

    This report provides an overview of the state of the art of personal computer (PC)-based computer-aided design and drafting (CADD) systems for mechanical engineering applications. It presents the results of an evaluation performed on seven systems during October 1987 to March 1988 and summarizes the strengths and weaknesses of the systems.

  18. Computer program for design and performance analysis of navigation-aid power systems

    NASA Technical Reports Server (NTRS)

    Weiner, H.; Wiener, P.; Williams, K.

    1976-01-01

    The paper examines the requirements, design rationale, operation, and verification of a computer program designated as design synthesis/performance analysis (DSPA) computer program, which is capable of performing all the calculations necessary to understand the overall characteristics of solar array/battery power systems for navigation-aid applications. Despite the uncertainties in the erratic solar array degradation data and the potential impact on actual battery behavior, verification of the DSPA is considered successful. The program is shown to have the capability of simulating the performance of solar array/battery navigation-aid power systems. It can also be used to synthesize power system designs and provide essential design and cost data.

  19. Multicriteria aided design of integrated heating-cooling energy systems in buildings.

    PubMed

    Mróz, Tomasz M

    2010-08-01

    This paper presents an analysis of the possible application of integrated heating-cooling systems in buildings. The general algorithm of integrated heating-cooling system design aid was formulated. The evaluation criteria of technically acceptable variants were defined. Fossil fuel energy consumption, carbon dioxide emission, investment, and total exploitation cost were identified as the most important factors describing the considered decision problem. The multicriteria decision aid method ELECTRE III was proposed as the decision tool for the choice of the most compromised variant. The proposed method was used for a case study calculation-the choice of an integrated heating-cooling system for an office building.

  20. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk.

    PubMed

    Manbeck, Harvey B; Hofstetter, Daniel W; Murphy, Dennis J; Puri, Virendra M

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated.

  1. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk

    PubMed Central

    Manbeck, Harvey B.; Hofstetter, Daniel W.; Murphy, Dennis J.; Puri, Virendra M.

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  2. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk.

    PubMed

    Manbeck, Harvey B; Hofstetter, Daniel W; Murphy, Dennis J; Puri, Virendra M

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  3. IDEAS: A multidisciplinary computer-aided conceptual design system for spacecraft

    NASA Technical Reports Server (NTRS)

    Ferebee, M. J., Jr.

    1984-01-01

    During the conceptual development of advanced aerospace vehicles, many compromises must be considered to balance economy and performance of the total system. Subsystem tradeoffs may need to be made in order to satisfy system-sensitive attributes. Due to the increasingly complex nature of aerospace systems, these trade studies have become more difficult and time-consuming to complete and involve interactions of ever-larger numbers of subsystems, components, and performance parameters. The current advances of computer-aided synthesis, modeling and analysis techniques have greatly helped in the evaluation of competing design concepts. Langley Research Center's Space Systems Division is currently engaged in trade studies for a variety of systems which include advanced ground-launched space transportation systems, space-based orbital transfer vehicles, large space antenna concepts and space stations. The need for engineering analysis tools to aid in the rapid synthesis and evaluation of spacecraft has led to the development of the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. The ADEAS system has been used to perform trade studies of competing technologies and requirements in order to pinpoint possible beneficial areas for research and development. IDEAS is presented as a multidisciplinary tool for the analysis of advanced space systems. Capabilities range from model generation and structural and thermal analysis to subsystem synthesis and performance analysis.

  4. Operator Station Design System - A computer aided design approach to work station layout

    NASA Technical Reports Server (NTRS)

    Lewis, J. L.

    1979-01-01

    The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

  5. [A computer-aided design assessment system for recovery life support technology options].

    PubMed

    Chen, J; Wang, F; Sun, J; Shang, C

    1997-04-01

    A specific computer-aided decision support system was designed and implemented for design computation and decision assessment of environmental control and life support system of manned space station. An advanced multiobjective decision methodology and a hierarchic structure model of assessment index of recovery life support system was developed. The program incorporates a database for each technology option, metabolic design loads associated with crew activity, mission model variables to accommodate evolving mission requirements, and algorithms to produce products criteria in order to provide recommendations relative to candidate technology selection and development. A specific structure was developed for the decision system which consists of a database, a methodology base and a model base as well as their management systems. Moreover, a centre control system with friendly user interface plays a very important role in the man-computer interaction.

  6. Crew aiding and automation: A system concept for terminal area operations, and guidelines for automation design

    NASA Technical Reports Server (NTRS)

    Dwyer, John P.

    1994-01-01

    This research and development program comprised two efforts: the development of guidelines for the design of automated systems, with particular emphasis on automation design that takes advantage of contextual information, and the concept-level design of a crew aiding system, the Terminal Area Navigation Decision Aiding Mediator (TANDAM). This concept outlines a system capable of organizing navigation and communication information and assisting the crew in executing the operations required in descent and approach. In service of this endeavor, problem definition activities were conducted that identified terminal area navigation and operational familiarization exercises addressing the terminal area navigation problem. Both airborne and ground-based (ATC) elements of aircraft control were extensively researched. The TANDAM system concept was then specified, and the crew interface and associated systems described. Additionally, three descent and approach scenarios were devised in order to illustrate the principal functions of the TANDAM system concept in relation to the crew, the aircraft, and ATC. A plan for the evaluation of the TANDAM system was established. The guidelines were developed based on reviews of relevant literature, and on experience gained in the design effort.

  7. Computer-aided design of control systems to meet many requirements

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

    1974-01-01

    A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

  8. Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

    NASA Astrophysics Data System (ADS)

    das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

    2014-08-01

    The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

  9. ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

    NASA Technical Reports Server (NTRS)

    Jayaram, S.; Myklebust, A.; Gelhausen, P.

    1992-01-01

    A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

  10. Selecting and implementing an interactive Computer Aided Design Drafting/Manufacturing (CADD/M) system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Success with Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) depends upon management, users, and the system itself. If you are in a design and drafting environment, the thought of acquiring a CADD/M system will probably occur to you sometime in the very near future - if it hasn't already. Convincing yourself and your management of the benefits of such systems is but the first step. Evaluating and selecting one particular type of CADD/M system can turn out to be a complicated undertaking - not to mention somewhat frustrating. Procedures for selecting and successfully implementing a CADD/M system are outlined. INITIAL PREPARATION examines the techniques used to evaluate CADD/M systems including formation of an evaluation team, and application analysis. GRAPHICS EVALUATION describes the methods that can be used to test a CADD/M system, including benchmark drawings and specifications, human engineering considerations, and other evaluation criteria and general system configurations are also discussed. COMPUTER SYSTEM EVALUATION examines other factors in systems selection: programming, communications, documentation, and service. SYSTEM STARTUP addresses site preparation, people preparation, system acceptance, and operator, designer/drafter selection. Finally, operator, designer/drafter TRAINING and SYSTEM MANAGEMENT are discussed. This systematic approach wil help those contemplating the acquisition of CADD/M systems for their activities and will help minimize unplanned events and problem areas.Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This in turn will lead to considerable cost savings and schedule improvements for an entire project, from initial design to final production. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  11. Development of the engineering design integration (EDIN) system: A computer aided design development

    NASA Technical Reports Server (NTRS)

    Glatt, C. R.; Hirsch, G. N.

    1977-01-01

    The EDIN (Engineering Design Integration) System which provides a collection of hardware and software, enabling the engineer to perform man-in-the-loop interactive evaluation of aerospace vehicle concepts, was considered. Study efforts were concentrated in the following areas: (1) integration of hardware with the Univac Exec 8 System; (2) development of interactive software for the EDIN System; (3) upgrading of the EDIN technology module library to an interactive status; (4) verification of the soundness of the developing EDIN System; (5) support of NASA in design analysis studies using the EDIN System; (6) provide training and documentation in the use of the EDIN System; and (7) provide an implementation plan for the next phase of development and recommendations for meeting long range objectives.

  12. VIP: A knowledge-based design aid for the engineering of space systems

    NASA Technical Reports Server (NTRS)

    Lewis, Steven M.; Bellman, Kirstie L.

    1990-01-01

    The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

  13. Large Advanced Space Systems (LASS) computer-aided design program additions

    NASA Technical Reports Server (NTRS)

    Farrell, C. E.

    1982-01-01

    The LSS preliminary and conceptual design requires extensive iteractive analysis because of the effects of structural, thermal, and control intercoupling. A computer aided design program that will permit integrating and interfacing of required large space system (LSS) analyses is discussed. The primary objective of this program is the implementation of modeling techniques and analysis algorithms that permit interactive design and tradeoff studies of LSS concepts. Eight software modules were added to the program. The existing rigid body controls module was modified to include solar pressure effects. The new model generator modules and appendage synthesizer module are integrated (interfaced) to permit interactive definition and generation of LSS concepts. The mass properties module permits interactive specification of discrete masses and their locations. The other modules permit interactive analysis of orbital transfer requirements, antenna primary beam n, and attitude control requirements.

  14. Computer-aided design system with artificial intelligence for automatic dimensioning

    SciTech Connect

    Huang, R.; Juricic, D.

    1995-12-31

    This paper is concerned with the methodology applicable to automating computer drafting tasks of a Computer-Aided Drafting and Design (CADD) system. One of the main characteristics of these tasks is the need for interaction with geometric models and their features. The specific drafting task considered in this paper was dimensioning of a multiview drawing. The paper illustrates the approach used and describes the introduction of relevant knowledge base as well as implementation of an inference engine internal to the drafting system. A simple class of objects was used to illustrate in more details the methods involved. It is noted that developing this methodology may be of vital importance for further automation of the drafting and design process.

  15. A computer-aided design system geared toward conceptual design in a research environment. [for hypersonic vehicles

    NASA Technical Reports Server (NTRS)

    STACK S. H.

    1981-01-01

    A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

  16. Telerobotic workstation design aid

    NASA Technical Reports Server (NTRS)

    Corker, K.; Hudlicka, E.; Young, D.; Cramer, N.

    1989-01-01

    Telerobot systems are being developed to support a number of space mission applications. In low earth orbit, telerobots and teleoperated manipulators will be used in shuttle operations and space station construction/maintenance. Free flying telerobotic service vehicles will be used at low and geosynchronous orbital operations. Rovers and autonomous vehicles will be equipped with telerobotic devices in planetary exploration. In all of these systems, human operators will interact with the robot system at varied levels during the scheduled operations. The human operators may be in either orbital or ground-based control systems. To assure integrated system development and maximum utility across these systems, designers must be sensitive to the constraints and capabilities that the human brings to system operation and must be assisted in applying these human factors to system development. The simulation and analysis system is intended to serve the needs of system analysis/designers as an integrated workstation in support of telerobotic design.

  17. Cost justification for an interactive Computer-Aided Design Drafting/Manufacturing system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Many factors influence the capital investment decision. System costs and benefits are weighed by methods of financial analysis to determine the advisability of an investment. Capital, expense, and benefits as related to Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) Systems are discussed and model calculations are included. An example is treated by the simple payback method and the more sophisticated methods of Net Present Value (NPV) and Internal Rate of Return (IRR). The NPV and IRR approaches include in the calculation the time value of money and provide a sounder foundation on which to base the purchase decision. It is hoped that an understanding of these techniques by technical personnel will make an optimum system purchase more likely.

  18. Computer aided flexible envelope designs

    NASA Technical Reports Server (NTRS)

    Resch, R. D.

    1975-01-01

    Computer aided design methods are presented for the design and construction of strong, lightweight structures which require complex and precise geometric definition. The first, flexible structures, is a unique system of modeling folded plate structures and space frames. It is possible to continuously vary the geometry of a space frame to produce large, clear spans with curvature. The second method deals with developable surfaces, where both folding and bending are explored with the observed constraint of available building materials, and what minimal distortion result in maximum design capability. Alternative inexpensive fabrication techniques are being developed to achieve computer defined enclosures which are extremely lightweight and mathematically highly precise.

  19. Selection and implementation of a computer aided design and drafting (CAD/D) system

    SciTech Connect

    Davis, J.P.

    1981-01-01

    Faced with very heavy workloads and limited engineering and graphics personnel, Transco opted for a computer-aided design and drafting system that can produce intelligent drawings, which have associated data bases that can be integrated with other graphical and nongraphical data bases to form comprehensive sets of data for construction projects. Because so much time was being spent in all phases of materials and inventory control, Transco decided to integrate materials-management capabilities into the CAD/D system. When a specific item of material is requested on the graphics equipment, the request triggers production of both the drawing and a materials list. Transco plans to extend its computer applications into mapping tasks as well.

  20. Facility management of computer-aided design, drafting/manufacturing systems (CADD/M)

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Interactive Computer-Aided Design Drafting/Manufacturing systems have been installed in thousands of companies, applying CADD/M capabilities to many applications. This has been done with varying degrees of success even among companies with identical applications. Investigation of individual companies reveals a gap between the capabilities of CADD/M systems and the actual usage by industry of those capabilities. This company usage often determines the degree of success or failure of an interactive graphics facility and is largely controlled by management. The responsibilities of the interactive graphics facility managemant team are explained in detail. Proper management of a CADD/M facility is more critical to the success or failure of the facility than any other factor.

  1. Harnessing Polypharmacology with Computer-Aided Drug Design and Systems Biology.

    PubMed

    Wathieu, Henri; Issa, Naiem T; Byers, Stephen W; Dakshanamurthy, Sivanesan

    2016-01-01

    The ascent of polypharmacology in drug development has many implications for disease therapy, most notably in the efforts of drug discovery, drug repositioning, precision medicine and combination therapy. The single- target approach to drug development has encountered difficulties in predicting drugs that are both clinically efficacious and avoid toxicity. By contrast, polypharmacology offers the possibility of a controlled distribution of effects on a biological system. This review addresses possibilities and bottlenecks in the efficient computational application of polypharmacology. The two major areas we address are the discovery and prediction of multiple protein targets using the tools of computer-aided drug design, and the use of these protein targets in predicting therapeutic potential in the context of biological networks. The successful application of polypharmacology to systems biology and pharmacology has the potential to markedly accelerate the pace of development of novel therapies for multiple diseases, and has implications for the intellectual property landscape, likely requiring targeted changes in patent law. PMID:26907947

  2. Harnessing Polypharmacology with Computer-Aided Drug Design and Systems Biology.

    PubMed

    Wathieu, Henri; Issa, Naiem T; Byers, Stephen W; Dakshanamurthy, Sivanesan

    2016-01-01

    The ascent of polypharmacology in drug development has many implications for disease therapy, most notably in the efforts of drug discovery, drug repositioning, precision medicine and combination therapy. The single- target approach to drug development has encountered difficulties in predicting drugs that are both clinically efficacious and avoid toxicity. By contrast, polypharmacology offers the possibility of a controlled distribution of effects on a biological system. This review addresses possibilities and bottlenecks in the efficient computational application of polypharmacology. The two major areas we address are the discovery and prediction of multiple protein targets using the tools of computer-aided drug design, and the use of these protein targets in predicting therapeutic potential in the context of biological networks. The successful application of polypharmacology to systems biology and pharmacology has the potential to markedly accelerate the pace of development of novel therapies for multiple diseases, and has implications for the intellectual property landscape, likely requiring targeted changes in patent law.

  3. Experiences in control system design aided by interactive computer programs: temperature control of the laser isotope separation vessel

    SciTech Connect

    Gavel, D.T.; Pittenger, L.C.; McDonald, J.S.; Cramer, P.G.; Herget, C.J.

    1985-01-01

    A robust control system has been designed to regulate temperature in a vacuum vessel. The thermodynamic process is modeled by a set of nonlinear, implicit differential equations. The control design and analysis task exercised many of the computer-aided control systems design software packages, including MATLAB, DELIGHT, and LSAP. The working environment is a VAX computer. Advantages and limitations of the software and environment, and the impact on final controller design is discussed.

  4. Computer-aided rational design of the phosphotransferase system for enhanced glucose uptake in Escherichia coli.

    PubMed

    Nishio, Yousuke; Usuda, Yoshihiro; Matsui, Kazuhiko; Kurata, Hiroyuki

    2008-01-01

    The phosphotransferase system (PTS) is the sugar transportation machinery that is widely distributed in prokaryotes and is critical for enhanced production of useful metabolites. To increase the glucose uptake rate, we propose a rational strategy for designing the molecular architecture of the Escherichia coli glucose PTS by using a computer-aided design (CAD) system and verified the simulated results with biological experiments. CAD supports construction of a biochemical map, mathematical modeling, simulation, and system analysis. Assuming that the PTS aims at controlling the glucose uptake rate, the PTS was decomposed into hierarchical modules, functional and flux modules, and the effect of changes in gene expression on the glucose uptake rate was simulated to make a rational strategy of how the gene regulatory network is engineered. Such design and analysis predicted that the mlc knockout mutant with ptsI gene overexpression would greatly increase the specific glucose uptake rate. By using biological experiments, we validated the prediction and the presented strategy, thereby enhancing the specific glucose uptake rate.

  5. The management of endodontically treated teeth using a Computer-Aided Design and Computer-Assisted Manufacturing/Computer-Aided Design and Computer-Integrated Manufacturing system.

    PubMed

    Foerster, J G; von Gonten, A S; Robert, G H

    1999-01-01

    This article introduces a new approach for restoring endodontically treated posterior teeth. Significantly reduced natural tooth structure often remains not only because of previous restorative measures but also because of endodontic procedures. Cast restorations for these teeth are almost universally recommended. The exception to this is the rare instance in which only conservative endodontic access openings exist in teeth presenting with no former existing restorations. Typically, multiple clinical appointments are required to complete the final cast restoration. This article presents Computer-Aided Design and Computer-Assisted Manufacturing/Computer-Aided Design and Computer-Integrated Manufacturing applications for restorative dentistry that provide the necessary care in an expeditious manner.

  6. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  7. Computer Aided Design in Engineering Education.

    ERIC Educational Resources Information Center

    Gobin, R.

    1986-01-01

    Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

  8. A visual-aided wireless monitoring system design for total hip replacement surgery.

    PubMed

    Chen, Hong; Gao, Jiyang; Su, Shaojie; Zhang, Xu; Wang, Zhihua

    2015-04-01

    To improve the positioning accuracy of implants in Total Hip Replacement (THR) surgeries, a visual-aided wireless monitoring system for THR surgery is proposed in this paper. This system aims to measure and display the contact distribution and relative pose between femoral head and acetabulum prosthesis during the surgery to help surgeons obtain accurate position of implants. The system consists of two parts: the Sensors Array Measuring System (SAMS) and the display part. The SAMS is composed of a sensors array (including contact sensors and an image sensor), signal conditioning circuits, a low power microcontroller (MCU), and a low-power transceiver. The SAMS is designed to estimate the relative pose of femoral head component to acetabular component. The display part processes the data from sensors and demonstrates the contact distribution and the pose of the prothesis during the surgery in 3-D graphics. The two parts of the system communicate with each other on an RF link at the band of 400 MHz. The signal conditioning circuits have been designed and fabricated in 0.18 μm CMOS process. Testing results show that the resolution of the signal conditioning circuits is 60.1 μ Vpp (1.35 g) with ±100 mVpp input. The chip can operate under 1.2-to-3.6 V supply voltage for single battery applications with 116-160 μ A current consumption. The system has been verified by the simulation with rotation quaternion and translation vector. The experimental results show that the contact distribution and relative pose of the two components could be measured and demonstrated in real time. The relative error of rotation is less than 8% and the actual relative error of translation is less than 10%.

  9. A visual-aided wireless monitoring system design for total hip replacement surgery.

    PubMed

    Chen, Hong; Gao, Jiyang; Su, Shaojie; Zhang, Xu; Wang, Zhihua

    2015-04-01

    To improve the positioning accuracy of implants in Total Hip Replacement (THR) surgeries, a visual-aided wireless monitoring system for THR surgery is proposed in this paper. This system aims to measure and display the contact distribution and relative pose between femoral head and acetabulum prosthesis during the surgery to help surgeons obtain accurate position of implants. The system consists of two parts: the Sensors Array Measuring System (SAMS) and the display part. The SAMS is composed of a sensors array (including contact sensors and an image sensor), signal conditioning circuits, a low power microcontroller (MCU), and a low-power transceiver. The SAMS is designed to estimate the relative pose of femoral head component to acetabular component. The display part processes the data from sensors and demonstrates the contact distribution and the pose of the prothesis during the surgery in 3-D graphics. The two parts of the system communicate with each other on an RF link at the band of 400 MHz. The signal conditioning circuits have been designed and fabricated in 0.18 μm CMOS process. Testing results show that the resolution of the signal conditioning circuits is 60.1 μ Vpp (1.35 g) with ±100 mVpp input. The chip can operate under 1.2-to-3.6 V supply voltage for single battery applications with 116-160 μ A current consumption. The system has been verified by the simulation with rotation quaternion and translation vector. The experimental results show that the contact distribution and relative pose of the two components could be measured and demonstrated in real time. The relative error of rotation is less than 8% and the actual relative error of translation is less than 10%. PMID:25879970

  10. Design, Development, Implementation, and Evaluation of the Computer Aided Interactive Testing System (CAITS). Focus on the Trained Person.

    ERIC Educational Resources Information Center

    1983

    This report describes the design, development, implementation, and evaluation of the Computer Aided Interactive Testing System (CAITS) and addresses the applicability of the system in the Naval Education and Training Command. In addition to an introduction (section one), the report contains four sections and three appendices. Section two describes…

  11. Aids to School Bus Design

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Navistar International Transportation Corporation, Chicago, IL, used three separate NASA-developed technologies in the design and testing of their 3000 Series Bus Chassis which was developed expressly for school bus applications. For structural analysis, they used the MSC/NASTRAN program which mathematically analyzes a design and predicts how it will hold up under stress. They also used the SPATE 9000 system for non-contact measurement of stress, load transfer mechanisms, detection of hidden flaws, and monitoring structural changes during fatigue testing. SPATE 9000 was based on infrared stress measurement technology developed by Langley Research Center. They also employed the Wyle Ride Quality Meter, which was developed by Langley to aid in passenger aircraft design by providing an accurate measurement of ride vibration and sound level. These numbers translate into a subjective discomfort level index. These technologies contribute to the company's 45-48 percent share of the school bus chassis market.

  12. Computer-aided design and computer-aided manufacture (CAD/CAM) system for construction of spinal orthosis for patients with adolescent idiopathic scoliosis.

    PubMed

    Wong, M S

    2011-01-01

    ABSTRACT Spinal orthoses are commonly prescribed to patients with moderate adolescent idiopathic scoliosis (AIS) for prevention of further curve deterioration. In conventional manufacturing method, plaster bandages are used to obtain the patient's body contour and then the plaster cast is rectified manually. With computer-aided design and computer-aided manufacture (CAD/CAM) system, a series of automated processes from body scanning to digital rectification and milling of the positive model can be performed in a fast and accurate fashion. The purpose of this manuscript is to introduce the application of CAD/CAM system to the construction of spinal orthosis for patients with AIS. Based on evidence within the literature, CAD/CAM method can achieve similar clinical outcomes but with higher efficiency than the conventional fabrication method. Therefore, CAD/CAM method should be considered a substitute to the conventional method in fabrication of spinal orthoses for patients with AIS.

  13. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  14. EGRAM- ECHELLE SPECTROGRAPH DESIGN AID

    NASA Technical Reports Server (NTRS)

    Dantzler, A. A.

    1994-01-01

    EGRAM aids in the design of spectrographic systems that utilize an echelle-first order cross disperser combination. This optical combination causes a two dimensional echellogram to fall on a detector. EGRAM describes the echellogram with enough detail to allow the user to effectively judge the feasibility of the spectrograph's design. By iteratively altering system parameters, the desired echellogram can be achieved without making a physical model. EGRAM calculates system parameters which are accurate to the first order and compare favorably to results from ray tracing techniques. The spectrographic system modelled by EGRAM consists of an entrance aperture, collimator, echelle, cross dispersion grating, focusing options, and a detector. The system is assumed to be free of aberrations and the echelle, cross disperser, and detector should be planar. The EGRAM program is menu driven and has a HELP facility. The user is prompted for information such as minimum and maximum wavelengths, slit dimensions, ruling frequencies, detector geometry, and angle of incidence. EGRAM calculates the resolving power and range of order numbers covered by the echellogram. A numerical map is also produced. This tabulates the order number, slit bandpass, and high/middle/low wavelengths. EGRAM can also compute the centroid coordinates of a specific wavelength and order (or vice versa). EGRAM is written for interactive execution and is written in Microsoft BASIC A. It has been implemented on an IBM PC series computer operating under DOS. EGRAM was developed in 1985.

  15. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Lipshutz, Robert J.; Morris, Macdonald S.; Winkler, James L.

    1997-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks.

  16. Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided design/computer-aided manufacturing systems.

    PubMed

    Kohorst, Philipp; Brinkmann, Henrike; Li, Jiang; Borchers, Lothar; Stiesch, Meike

    2009-06-01

    Besides load-bearing capacity, marginal accuracy is a further crucial factor influencing the clinical long-term reliability of fixed dental prostheses (FDPs). The aim of this in vitro study was to evaluate the marginal fit of four-unit zirconia bridge frameworks fabricated using four different computer-aided design (CAD)/computer-aided manufacturing (CAM) systems. Ten frameworks were manufactured using each fabricating system. Three systems (inLab, Everest, Cercon) processed white-stage zirconia blanks, which had to be sintered to final density after milling, while with one system (Digident) restorations were directly milled from a fully sintered material. After manufacturing, horizontal and vertical marginal discrepancies, as well as the absolute marginal discrepancy, were determined by means of a replica technique. The absolute marginal discrepancy, which is considered to be the most suitable parameter reflecting restorations' misfit in the marginal area, had a mean value of 58 mum for the Digident system. By contrast, mean absolute marginal discrepancies for the three other systems, processing presintered blanks, differed significantly and ranged between 183 and 206 mum. Within the limitations of this study, it could be concluded that the marginal fit of zirconia FDPs is significantly dependent on the CAD/CAM system used, with restorations processed of fully sintered zirconia showing better fitting accuracy. PMID:19583762

  17. Adaptive Intrusion Data System (AIDS)

    SciTech Connect

    Corlis, N. E.

    1980-05-01

    The adaptive intrusion data system (AIDS) was developed to collect data from intrusion alarm sensors as part of an evaluation system to improve sensor performance. AIDS is a unique data system which uses computer controlled data systems, video cameras and recorders, analog-to-digital conversion, environmental sensors, and digital recorders to collect sensor data. The data can be viewed either manually or with a special computerized data-reduction system which adds new data to a data base stored on a magnetic disc recorder. This report provides a synoptic account of the AIDS as it presently exists. Modifications to the purchased subsystems are described, and references are made to publications which describe the Sandia-designed subsystems.

  18. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1999-01-05

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  19. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1996-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  20. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1999-01-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  1. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1996-11-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  2. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Lipshutz, R.J.; Morris, M.S.; Winkler, J.L.

    1997-01-14

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  3. Computer Code Aids Design Of Wings

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.; Darden, Christine M.

    1993-01-01

    AERO2S computer code developed to aid design engineers in selection and evaluation of aerodynamically efficient wing/canard and wing/horizontal-tail configurations that includes simple hinged-flap systems. Code rapidly estimates longitudinal aerodynamic characteristics of conceptual airplane lifting-surface arrangements. Developed in FORTRAN V on CDC 6000 computer system, and ported to MS-DOS environment.

  4. Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

    NASA Technical Reports Server (NTRS)

    Goltz, G.; Kaiser, L. M.; Weiner, H.

    1977-01-01

    A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

  5. VPIsystems industry training program on computer-aided design of fiber optic communication systems

    NASA Astrophysics Data System (ADS)

    Richter, Andre; Chan, David K. C.

    2002-05-01

    In industry today, professional Photonic Design Automation (PDA) tools are a necessity to enable fast development cycles for the design of optical components, systems and networks. The training of industrial personnel is of great importance in facilitating the full usability of PDA tools tailored to meet these demands. As the market leader of design and planning tools for system integrators and manufacturers of optical transmission systems and components, VPIsystems offers a set of two-day training courses. Attendees are taught on the design of metro WDM networks, high speed DWDM and ultra long-haul WDM systems, analogue and digital cable access systems, EDFA and Raman amplifiers, as well as active devices and circuits. The course work compromises of: (1) lectures on physical and modeling background topics; (2) creation of typical simulation scenarios and; (3) the analysis of results. This course work is facilitated by guided, hands-on lab exercises using VPIsystems software for a variety of practical design situations. In classes of up to 15, each attendee is allocated a computer, thereby allowing for a thorough and speedy training for the individual in all of the covered topics as well as for any extra-curriculum topics to be covered. Since 1999, more than 750 people have graduated from over 60 training courses. In this paper, details of VPIsystems Industry training program will be presented.

  6. Building a computer-aided design capability using a standard time share operating system

    NASA Technical Reports Server (NTRS)

    Sobieszczanski, J.

    1975-01-01

    The paper describes how an integrated system of engineering computer programs can be built using a standard commercially available operating system. The discussion opens with an outline of the auxiliary functions that an operating system can perform for a team of engineers involved in a large and complex task. An example of a specific integrated system is provided to explain how the standard operating system features can be used to organize the programs into a simple and inexpensive but effective system. Applications to an aircraft structural design study are discussed to illustrate the use of an integrated system as a flexible and efficient engineering tool. The discussion concludes with an engineer's assessment of an operating system's capabilities and desirable improvements.

  7. Computer-Aided Design in Further Education.

    ERIC Educational Resources Information Center

    Ingham, Peter, Ed.

    This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

  8. A Short Review of Chemical Reaction Database Systems, Computer-Aided Synthesis Design, Reaction Prediction and Synthetic Feasibility.

    PubMed

    Warr, Wendy A

    2014-06-01

    This article is the text for a pedagogical lecture to be given at the Strasbourg Summer School in Chemoinformatics in June 2104. It covers a very wide range of reaction topics including structure and reaction representation, reaction centers, atom-to-atom mapping, reaction retrieval systems, computer-aided synthesis design, retrosynthesis, reaction prediction and synthetic feasibility. In the time available the coverage of each topic can only be cursory; the main usefulness of this article to the research community is the extensive bibliography.

  9. AESOP: A computer-aided design program for linear multivariable control systems

    NASA Technical Reports Server (NTRS)

    Lehtinen, B.; Geyser, L. C.

    1982-01-01

    An interactive computer program (AESOP) which solves quadratic optimal control and is discussed. The program can also be used to perform system analysis calculations such as transient and frequency responses, controllability, observability, etc., in support of the control and filter design computations.

  10. Designing for the home: a comparative study of support aids for central heating systems.

    PubMed

    Sauer, J; Wastell, D G; Schmeink, C

    2009-03-01

    The study examined the influence of different types of enhanced system support on user performance during the management of a central heating system. A computer-based simulation of a central heating system, called CHESS V2.0, was used to model different interface options, providing different support facilities to the user (e.g., historical, predictive, and instructional displays). Seventy-five participants took part in the study and completed a series of operational scenarios under different support conditions. The simulation environment allowed the collection of performance measures (e.g., energy consumption), information sampling, and system control behaviour. Subjective user evaluations of various aspects of the system were also measured. The results showed performance gains for predictive displays whereas no such benefits were observed for the other display types. The data also revealed that status and predictive displays were valued most highly by users. The implications of the findings for designers of central heating systems are discussed. PMID:18433730

  11. Designing for the home: a comparative study of support aids for central heating systems.

    PubMed

    Sauer, J; Wastell, D G; Schmeink, C

    2009-03-01

    The study examined the influence of different types of enhanced system support on user performance during the management of a central heating system. A computer-based simulation of a central heating system, called CHESS V2.0, was used to model different interface options, providing different support facilities to the user (e.g., historical, predictive, and instructional displays). Seventy-five participants took part in the study and completed a series of operational scenarios under different support conditions. The simulation environment allowed the collection of performance measures (e.g., energy consumption), information sampling, and system control behaviour. Subjective user evaluations of various aspects of the system were also measured. The results showed performance gains for predictive displays whereas no such benefits were observed for the other display types. The data also revealed that status and predictive displays were valued most highly by users. The implications of the findings for designers of central heating systems are discussed.

  12. Aided targeting system simulation evaluation

    NASA Technical Reports Server (NTRS)

    Demaio, Joe; Becker, Curtis

    1994-01-01

    Simulation research was conducted at the Crew Station Research and Development Facility on the effectiveness and ease of use of three targeting systems. A manual system required the aviator to scan a target array area with a simulated second generation forward looking infrared (FLIR) sensor, locate and categorize targets, and construct a target hand-off list. The interface between the aviator and the system was like that of an advanced scout helicopter (manual mode). Two aided systems detected and categorized targets automatically. One system used only the FLIR sensor and the second used FLIR fused with Longbow radar. The interface for both was like that of an advanced scout helicopter aided mode. Exposure time while performing the task was reduced substantially with the aided systems, with no loss of target hand-off list accuracy. The fused sensor system showed lower time to construct the target hand-off list and a slightly lower false alarm rate than the other systems. A number of issues regarding system sensitivity and criterion, and operator interface design are discussed.

  13. Using queuing models to aid design and guide research effort for multimodality buried target detection systems

    NASA Astrophysics Data System (ADS)

    Malof, Jordan M.; Collins, Leslie M.

    2016-05-01

    Many remote sensing modalities have been developed for buried target detection (BTD), each one offering relative advantages over the others. There has been interest in combining several modalities into a single BTD system that benefits from the advantages of each constituent sensor. Recently an approach was developed, called multi-state management (MSM), that aims to achieve this goal by separating BTD system operation into discrete states, each with different sensor activity and system velocity. Additionally, a modeling approach, called Q-MSM, was developed to quickly analyze multi-modality BTD systems operating with MSM. This work extends previous work by demonstrating how Q-MSM modeling can be used to design BTD systems operating with MSM, and to guide research to yield the most performance benefits. In this work an MSM system is considered that combines a forward-looking infrared (FLIR) camera and a ground penetrating radar (GPR). Experiments are conducted using a dataset of real, field-collected, data which demonstrates how the Q-MSM model can be used to evaluate performance benefits of altering, or improving via research investment, various characteristics of the GPR and FLIR systems. Q-MSM permits fast analysis that can determine where system improvements will have the greatest impact, and can therefore help guide BTD research.

  14. Issues of a Computer-Aided Design of Hydraulic Jacks

    NASA Astrophysics Data System (ADS)

    Averchenkov, V. I.; Averchenkov, A. V.; Kolyakinand, V. V.; Orekhov, O. D.

    2016-04-01

    The article deals with the issues of a computer-aided design of hydraulic equipment, namely hydraulic jacks. Design principles of the hydraulic jack CAD system are described. In addition, the possibilities for the system improvement and expansion are considered.

  15. Suppression of Acoustic Oscillation in Hearing Aids: System and Circuit Design

    NASA Astrophysics Data System (ADS)

    Wang, Rongtai

    1995-01-01

    Two types of techniques for the suppression of acoustic oscillation in hearing aids have been studied, namely feed forward suppression and feedback cancellation. For feed forward suppression we introduce the maximum phase equalization (MPE) method based on the minimum phase theory. This method provides us with a higher degree of flexibility in selecting appropriate auxiliary techniques to suppress the acoustic oscillations. Examples of these auxiliary techniques have been described. But there is a limitation on the maximum usable gain increase by using feed forward techniques. For feedback cancellation techniques we present the knowledge based adaptive feedback cancellation (KBAFC) algorithm. This algorithm is fundamentally different from any previous technique. First, the KBAFC algorithm is based on the observation that although the hearing aid open loop transfer function does vary due to the change of the acoustic environment, however the structural behavior of the open loop transfer function remains invariant for a hearing aid in normal use. This property has been confirmed by experiments. In all previous feedback cancellation algorithms, such knowledge of the open loop transfer function is ignored. Second, in the KBAFC algorithm, since the structural behavior of the open loop transfer function is known, digital IIR and analog filters can be used. Additionally, a set of pure tones can be used as a probe signal. As a result, the computation complexity is reduced and the hearing aid is quiet. While in all previous feedback cancellation algorithms, since the open loop transfer function is considered to be a completely unknown, usually a FIR filter is used as a cancellation filter, and white noise is used as the probe signal. As a result, the computation complexity is large and the hearing aid is noisier. In order to verify the KBAFC algorithm, a prototype is implemented. The test results shows that by using the KBAFC algorithm the maximum cancellation can be larger

  16. Design and use of improved walking aids.

    PubMed

    Nava, L C; Laura, P A

    1985-10-01

    The design of crutches and walking sticks to assist the disabled has not varied much since their original conception, some 5000 years ago. From an engineering viewpoint one must consider crutches and walking sticks as dynamic mechanical systems which alleviate a disability; they may act as supports, help the user to recover from stumbling, or transmit from the arms, the energy required to lift the feet from the ground, an action not provided by artificial ankle joints. We describe some dynamic walking aids recently developed at the Instituto de Mecánica Aplicada, and discuss their design and our experience with their use. They are adjustable in height, shock absorbing and have non-slipping tips. Specially developed aids have been designed for children; they are versatile and their use has been made psychologically attractive.

  17. Computer-aided design and computer science technology

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Voigt, S. J.

    1976-01-01

    A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

  18. Integrated computer-aided design using minicomputers

    NASA Technical Reports Server (NTRS)

    Storaasli, O. O.

    1980-01-01

    Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

  19. Computer-aided antibody design

    PubMed Central

    Kuroda, Daisuke; Shirai, Hiroki; Jacobson, Matthew P.; Nakamura, Haruki

    2012-01-01

    Recent clinical trials using antibodies with low toxicity and high efficiency have raised expectations for the development of next-generation protein therapeutics. However, the process of obtaining therapeutic antibodies remains time consuming and empirical. This review summarizes recent progresses in the field of computer-aided antibody development mainly focusing on antibody modeling, which is divided essentially into two parts: (i) modeling the antigen-binding site, also called the complementarity determining regions (CDRs), and (ii) predicting the relative orientations of the variable heavy (VH) and light (VL) chains. Among the six CDR loops, the greatest challenge is predicting the conformation of CDR-H3, which is the most important in antigen recognition. Further computational methods could be used in drug development based on crystal structures or homology models, including antibody–antigen dockings and energy calculations with approximate potential functions. These methods should guide experimental studies to improve the affinities and physicochemical properties of antibodies. Finally, several successful examples of in silico structure-based antibody designs are reviewed. We also briefly review structure-based antigen or immunogen design, with application to rational vaccine development. PMID:22661385

  20. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1992-01-01

    The goal was the design and implementation of software to be used in the conceptual design of aerospace vehicles. Several packages and design studies were completed, including two software tools currently used in the conceptual level design of aerospace vehicles. These tools are the Solid Modeling Aerospace Research Tool (SMART) and the Environment for Software Integration and Execution (EASIE). SMART provides conceptual designers with a rapid prototyping capability and additionally provides initial mass property analysis. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand alone analysis codes that result in the streamlining of the exchange of data between programs, reducing errors and improving efficiency.

  1. A production systems design aid based on data simulation and analysis, volume 1

    NASA Astrophysics Data System (ADS)

    Heritier-Pingeon, Christine

    1991-05-01

    The need for production systems to be increasingly flexible is stressed. In the case of automated systems, decisions made early on in the conception phase will greatly effect the future possibilities of the system as well as its ability to adapt to changes. Decision making tools and methods are studied. The workshop model used as the basis for the study is presented. Knowledge acquisition methods and their effect on the behavior and performance of production systems is studied. An analytic method is proposed and used experimentally. The results of the experimental application are presented.

  2. An overview of the computer aided design system for drafting at Sandia National Laboratories, Livermore

    SciTech Connect

    Koopmann, B.E.

    1988-08-01

    Sandia Laboratories Livermore is converting the existing Computervision CADS system to a new hardware and software platform. This report describes the final configuration (after the conversion is completed) and the individual units comparing the system. A background describing the evolution of CADS at SNLL is appended.

  3. The large scale microelectronics Computer-Aided Design and Test (CADAT) system

    NASA Technical Reports Server (NTRS)

    Gould, J. M.

    1978-01-01

    The CADAT system consists of a number of computer programs written in FORTRAN that provide the capability to simulate, lay out, analyze, and create the artwork for large scale microelectronics. The function of each software component of the system is described with references to specific documentation for each software component.

  4. A 3D computer-aided design system applied to diagnosis and treatment planning in orthodontics and orthognathic surgery.

    PubMed

    Motohashi, N; Kuroda, T

    1999-06-01

    The purpose of this article is to describe a newly developed 3D computer-aided design (CAD) system for the diagnostic set-up of casts in orthodontic diagnosis and treatment planning, and its preliminary clinical applications. The system comprises a measuring unit which obtains 3D information from the dental model using laser scanning, and a personal computer to generate the 3D graphics. When measuring the 3D shape of the model, to minimize blind sectors, the model is scanned from two different directions with the slit-ray laser beam by rotating the mounting angle of the model on the measuring device. For computed simulation of tooth movement, the representative planes, defined by the anatomical reference points, are formed for each individual tooth and are arranged along a guideline descriptive of the individual arch form. Subsequently, the 3D shape is imparted to each of the teeth arranged on the representative plane to form an arrangement of the 3D profile. When necessary, orthognathic surgery can be simulated by moving the mandibular dental arch three-dimensionally to establish the optimum occlusal relationship. Compared with hand-made set-up models, the computed diagnostic cast has advantages such as high-speed processing and quantitative evaluation on the amount of 3D movement of the individual tooth relative to the craniofacial plane. Trial clinical applications demonstrated that the use of this system facilitated the otherwise complicated and time-consuming mock surgery for treatment planning in orthognathic surgery.

  5. OPAL: Toward the Computer-Aided Design of Oncology Advice Systems

    PubMed Central

    Musen, Mark A.; Combs, David M.; Walton, Joan D.; Shortliffe, Edward H.; Fagan, Lawrence M.

    1986-01-01

    Tools that allow physicians to enter knowledge directly into computers will greatly facilitate the creation of medical expert systems. OPAL is the knowledge entry program for ONCOCIN, an expert system that assists in the management of cancer patients enrolled in clinical trials. OPAL uses computer graphics techniques to display knowledge about cancer treatment plans in a manner intuitive to physicians. Knowledge entered graphically into OPAL is automatically converted by the program to the format used internally by ONCOCIN. OPAL thus allows clinical experts with no special training in computer science to create complex medical knowledge bases. Visual representation of knowledge in a manner that is understandable to physicians may greatly expedite the development of certain classes of medical advice systems.

  6. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.; Olariu, Stephen

    1995-01-01

    The primary goal of this grant has been the design and implementation of software to be used in the conceptual design of aerospace vehicles particularly focused on the elements of geometric design, graphical user interfaces, and the interaction of the multitude of software typically used in this engineering environment. This has resulted in the development of several analysis packages and design studies. These include two major software systems currently used in the conceptual level design of aerospace vehicles. These tools are SMART, the Solid Modeling Aerospace Research Tool, and EASIE, the Environment for Software Integration and Execution. Additional software tools were designed and implemented to address the needs of the engineer working in the conceptual design environment. SMART provides conceptual designers with a rapid prototyping capability and several engineering analysis capabilities. In addition, SMART has a carefully engineered user interface that makes it easy to learn and use. Finally, a number of specialty characteristics have been built into SMART which allow it to be used efficiently as a front end geometry processor for other analysis packages. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand-alone, analysis codes. Resulting in a streamlining of the exchange of data between programs reducing errors and improving the efficiency. EASIE provides both a methodology and a collection of software tools to ease the task of coordinating engineering design and analysis codes.

  7. Domain specific software design for decision aiding

    NASA Technical Reports Server (NTRS)

    Keller, Kirby; Stanley, Kevin

    1992-01-01

    McDonnell Aircraft Company (MCAIR) is involved in many large multi-discipline design and development efforts of tactical aircraft. These involve a number of design disciplines that must be coordinated to produce an integrated design and a successful product. Our interpretation of a domain specific software design (DSSD) is that of a representation or framework that is specialized to support a limited problem domain. A DSSD is an abstract software design that is shaped by the problem characteristics. This parallels the theme of object-oriented analysis and design of letting the problem model directly drive the design. The DSSD concept extends the notion of software reusability to include representations or frameworks. It supports the entire software life cycle and specifically leads to improved prototyping capability, supports system integration, and promotes reuse of software designs and supporting frameworks. The example presented in this paper is the task network architecture or design which was developed for the MCAIR Pilot's Associate program. The task network concept supported both module development and system integration within the domain of operator decision aiding. It is presented as an instance where a software design exhibited many of the attributes associated with DSSD concept.

  8. CAESY - COMPUTER AIDED ENGINEERING SYSTEM

    NASA Technical Reports Server (NTRS)

    Wette, M. R.

    1994-01-01

    Many developers of software and algorithms for control system design have recognized that current tools have limits in both flexibility and efficiency. Many forces drive the development of new tools including the desire to make complex system modeling design and analysis easier and the need for quicker turnaround time in analysis and design. Other considerations include the desire to make use of advanced computer architectures to help in control system design, adopt new methodologies in control, and integrate design processes (e.g., structure, control, optics). CAESY was developed to provide a means to evaluate methods for dealing with user needs in computer-aided control system design. It is an interpreter for performing engineering calculations and incorporates features of both Ada and MATLAB. It is designed to be reasonably flexible and powerful. CAESY includes internally defined functions and procedures, as well as user defined ones. Support for matrix calculations is provided in the same manner as MATLAB. However, the development of CAESY is a research project, and while it provides some features which are not found in commercially sold tools, it does not exhibit the robustness that many commercially developed tools provide. CAESY is written in C-language for use on Sun4 series computers running SunOS 4.1.1 and later. The program is designed to optionally use the LAPACK math library. The LAPACK math routines are available through anonymous ftp from research.att.com. CAESY requires 4Mb of RAM for execution. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. CAESY was developed in 1993 and is a copyrighted work with all copyright vested in NASA.

  9. Computer-aided design development transition for IPAD environment

    NASA Technical Reports Server (NTRS)

    Owens, H. G.; Mock, W. D.; Mitchell, J. C.

    1980-01-01

    The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

  10. Comparisons of Wilson-Fowler and Parametric Cubic Splines with the Curve-Fitting Algorithms of Several Computer-Aided Design Systems

    SciTech Connect

    Birchler, W.D.; Schilling, S.A.

    2001-02-01

    The purpose of this report is to demonstrate that modern computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems can be used in the Department of Energy (DOE) Nuclear Weapons Complex (NWC) to design new and remodel old products, fabricate old and new parts, and reproduce legacy data within the inspection uncertainty limits. In this study, two two-dimensional splines are compared with several modern CAD curve-fitting modeling algorithms. The first curve-fitting algorithm is called the Wilson-Fowler Spline (WFS), and the second is called a parametric cubic spline (PCS). Modern CAD systems usually utilize either parametric cubic and/or B-splines.

  11. Hearing aid malfunction detection system

    NASA Technical Reports Server (NTRS)

    Kessinger, R. L. (Inventor)

    1977-01-01

    A malfunction detection system for detecting malfunctions in electrical signal processing circuits is disclosed. Malfunctions of a hearing aid in the form of frequency distortion and/or inadequate amplification by the hearing aid amplifier, as well as weakening of the hearing aid power supply are detectable. A test signal is generated and a timed switching circuit periodically applies the test signal to the input of the hearing aid amplifier in place of the input signal from the microphone. The resulting amplifier output is compared with the input test signal used as a reference signal. The hearing aid battery voltage is also periodically compared to a reference voltage. Deviations from the references beyond preset limits cause a warning system to operate.

  12. School District Uses Computer Aided Design and Drafting.

    ERIC Educational Resources Information Center

    Lorentz, Gordon S.

    1988-01-01

    Computer Aided Design and Drafting (CADD) programs are used to teach drafting at an Indiana high school. The school system's maintenance department shared use of the software and equipment to produce original drawings of school buildings. (MLF)

  13. Photogrammetry and computer-aided piping design

    SciTech Connect

    Keneflick, J.F.; Chirillo, R.D.

    1985-02-18

    Three-dimensional measurements taken from photographs of a plant model can be digitized and linked with computer-aided piping design. This can short-cut the design and construction of new plants and expedite repair and retrofitting projects. Some designers bridge the gap between model and computer by digitizing from orthographic prints obtained via orthography or the laser scanning of model sections. Such valve or fitting then processed is described in this paper. The marriage of photogrammetry and computer-aided piping design can economically produce such numerical drawings.

  14. Computer-aided software development process design

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Levary, Reuven R.

    1989-01-01

    The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

  15. Human factors of intelligent computer aided display design

    NASA Technical Reports Server (NTRS)

    Hunt, R. M.

    1985-01-01

    Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

  16. Aids in designing laboratory flumes

    USGS Publications Warehouse

    Williams, Garnett P.

    1971-01-01

    The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

  17. The design and analysis of simple low speed flap systems with the aid of linearized theory computer programs

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.

    1985-01-01

    The purpose here is to show how two linearized theory computer programs in combination may be used for the design of low speed wing flap systems capable of high levels of aerodynamic efficiency. A fundamental premise of the study is that high levels of aerodynamic performance for flap systems can be achieved only if the flow about the wing remains predominantly attached. Based on this premise, a wing design program is used to provide idealized attached flow camber surfaces from which candidate flap systems may be derived, and, in a following step, a wing evaluation program is used to provide estimates of the aerodynamic performance of the candidate systems. Design strategies and techniques that may be employed are illustrated through a series of examples. Applicability of the numerical methods to the analysis of a representative flap system (although not a system designed by the process described here) is demonstrated in a comparison with experimental data.

  18. Ariel: an information system for AIDS research.

    PubMed

    Jordan, M M; Li, P

    1993-07-01

    An information system has been established at the National Institute for Biological Standards & Control for the exchange of knowledge in AIDS research, particularly in relation to vaccine design. This system, the AIDS information exchange link (Ariel), is designed to act as a central store of relevant information for scientists in the UK and abroad and was set up under the auspices of the Medical Research Council. It holds information on research materials (reagents), on genetic sequences and on projects. Several computers and database systems are involved. Access is obtained through Janet, the UK academic network, or PSS, the British Telecom public network. Both these networks are linked to international network systems, e.g. Internet, Earn, IPSS. Ariel has been in operation for 18 months and is accessed internationally.

  19. Simulation as an Aid to Experimental Design.

    ERIC Educational Resources Information Center

    Frazer, Jack W.; And Others

    1983-01-01

    Discusses simulation program to aid in the design of enzyme kinetic experimentation (includes sample runs). Concentration versus time profiles of any subset or all nine states of reactions can be displayed with/without simulated instrumental noise, allowing the user to estimate the practicality of any proposed experiment given known instrument…

  20. Expert System Shells: Tools to Aid Human Performance.

    ERIC Educational Resources Information Center

    Welsh, Jack R.; Wilson, Brent G.

    1987-01-01

    Examines expert system shells and the role a microcomputer-based expert system can play as an intelligent job aid. Characteristics of traditional and automated job aids techniques are described, and the role of instructional designers in developing expert systems within organizations is discussed. (Author/LRW)

  1. Solving rational matrix equations in the state space with applications to computer-aided control-system design

    NASA Technical Reports Server (NTRS)

    Packard, A. K.; Sastry, S. S.

    1986-01-01

    A method of solving a class of linear matrix equations over various rings is proposed, using results from linear geometric control theory. An algorithm, successfully implemented, is presented, along with non-trivial numerical examples. Applications of the method to the algebraic control system design methodology are discussed.

  2. System for maritime surveillance aid

    NASA Astrophysics Data System (ADS)

    Yamamoto, Kazuo; Yamada, Kimio; Kiriya, Nobuo

    1997-02-01

    A system to aid maritime surveillance is being studied to search for small floating objects like a life raft or to detect oil spill more reliably and efficiently. The system consists of sensors, an image processor and a display so as to reject unnecessary noise in the sea surface images, and then to detect and identify the objects to be searched. This paper describes the optical sensor system with an infrared camera and a TV camera. The infrared camera detects 3-5 micrometers waveband by 512 by 512 solid state sensing elements. The systems was used to gather images on different sea areas in summer and winter by aircraft and on the ground. Typical images are presented to demonstrate the validity of the sensor system to search for small flowing objects. The influences of air and water temperature, weather and observation altitude upon the images are discussed. Image processing techniques like filtering or image superposition are also described to suppress noise.

  3. Computer-Aided Design Of Sheet-Material Parts

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.; Paternoster, Vincent Y.; Levitt, Maureen L.; Osterloh, Mark R.

    1991-01-01

    Computer-aided-design system partly automates tedious process of designing and guiding assembly of small pieces of flat sheet material into large surfaces that approximate smoothly curved surfaces having complicated three-dimensional shapes. Capability provides for flexibility enabling designer to assess quickly and easily effects of changes in design in making engineering compromises among various sizes and shapes. Saves time and money in both design and fabrication. Used in rocket-engine application and other applications requiring design of sheet-material parts.

  4. The Development of the Bell System First Aid and Personal Safety Course; An Exercise in the Application of Empirical Methods to Instructional Systems Design. Final Report.

    ERIC Educational Resources Information Center

    Markle, David G.

    The project objective was to develop a basic first aid course which would teach at least as much in 7-1/2 hours as a standard ten-hour Red Cross course. Student performance on empirically revised editions of test questions led to the final design of the course. Data gathered from tryouts of 16mm pilot footage were used to write scripts for the…

  5. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1993-01-01

    Over the past several years, it has been the primary goal of this grant to design and implement software to be used in the conceptual design of aerospace vehicles. The work carried out under this grant was performed jointly with members of the Vehicle Analysis Branch (VAB) of NASA LaRC, Computer Sciences Corp., and Vigyan Corp. This has resulted in the development of several packages and design studies. Primary among these are the interactive geometric modeling tool, the Solid Modeling Aerospace Research Tool (smart), and the integration and execution tools provided by the Environment for Application Software Integration and Execution (EASIE). In addition, it is the purpose of the personnel of this grant to provide consultation in the areas of structural design, algorithm development, and software development and implementation, particularly in the areas of computer aided design, geometric surface representation, and parallel algorithms.

  6. Early & Often: Designing a Comprehensive System of Financial Aid Information. A Report of the Advisory Committee on Student Financial Assistance

    ERIC Educational Resources Information Center

    Advisory Committee on Student Financial Assistance, 2008

    2008-01-01

    Students and parents need ample time and accurate information to prepare for the financial burden of a college education--those who lack this knowledge base face a significant access barrier to higher education. This problem can be countered by the delivery of comprehensive, integrated financial aid information, an approach identified by the…

  7. Using Expert System Job Aids: A Primer.

    ERIC Educational Resources Information Center

    Carr, Clay

    1989-01-01

    Explains how current commercial expert system technology can be used to create useful job aids. Expert systems are defined, situations in which an expert system job aid will be most effective are described, expert system shells are discussed, and three commercial expert system products are described. (LRW)

  8. Design of a multi-sensor sonar system for indoor range measurement as a navigational aid for the blind.

    PubMed

    Choudhury, Maroof H; Barreto, Armando

    2003-01-01

    This paper reports the methodology for the design of a sonar-based ranging and guidance system. The intended application of the system is to help a blind person avoid obstacles as he/she navigates his/her environment. Six sonar transceivers are arranged radially on a headgear worn by the user. The transceivers detect discrete range data at discrete-time sampling instances. A panoramic map of the environment is generated from the discrete-space sensory data. The paper emphasizes the challenges faced during the measurement of omnidirectional ranging information in indoor environments. Situations have been identified where erroneous range readings are generated due to channel cross talk caused by echo bouncing off multiple surfaces. Several sonar control and measurement schemes were developed and tested to avoid these situations. The results and performance of these different control schemes are compared in this paper. A microcontroller-based system commands the sonar ping sequences, acquires the echo return times and computes the ranges. The set of range data is transmitted to a PC, which utilizes the information to build a spatialized audio map of the surrounding obstacles. The hardware and software layout for the system are described in this paper.

  9. Aspects on Transfer of Aided - Design Files

    NASA Astrophysics Data System (ADS)

    Goanta, A. M.; Anghelache, D. G.

    2016-08-01

    At this stage of development of hardware and software, each company that makes design software packages has a certain type of file created and customized in time to distinguish that company from its competitors. Thus today are widely known the DWG files belonging AutoCAD, IPT / IAM belonging to Inventor, PAR / ASM of Solid Edge's, PRT from the NX and so on. Behind every type of file there is a mathematical model which is common to more types of files. A specific aspect of the computer -aided design is that all softwares are working with both individual parts and assemblies, but their approach is different in that some use the same type of file both for each part and for the whole (PRT ), while others use different types of files (IPT / IAM, PAR / ASM, etc.). Another aspect of the computer -aided design is to transfer files between different companies which use different software packages or even the same software package but in different versions. Each of these situations generates distinct issues. Thus, to solve the partial reading by a project different from the native one, transfer files of STEP and IGES type are used

  10. The Computer Aided Aircraft-design Package (CAAP)

    NASA Technical Reports Server (NTRS)

    Yalif, Guy U.

    1994-01-01

    The preliminary design of an aircraft is a complex, labor-intensive, and creative process. Since the 1970's, many computer programs have been written to help automate preliminary airplane design. Time and resource analyses have identified, 'a substantial decrease in project duration with the introduction of an automated design capability'. Proof-of-concept studies have been completed which establish 'a foundation for a computer-based airframe design capability', Unfortunately, today's design codes exist in many different languages on many, often expensive, hardware platforms. Through the use of a module-based system architecture, the Computer aided Aircraft-design Package (CAAP) will eventually bring together many of the most useful features of existing programs. Through the use of an expert system, it will add an additional feature that could be described as indispensable to entry level engineers and students: the incorporation of 'expert' knowledge into the automated design process.

  11. Aids and the nervous system

    SciTech Connect

    Rosenblum, M.L. ); Levy, R.M. ); Bredesen, D.E. )

    1988-01-01

    This book contains 19 chapters. Some of the titles are: Neuroradiology of acquired immunodeficiency syndrome; The AIDS dementia complex; primary infection with human immunodeficiency virus; The biology of the human immunodeficiency virus and its role in neurological disease; and Algorithms for the treatment of AIDS patients with neurological disease.

  12. Hardware synthesis from DDL. [Digital Design Language for computer aided design and test of LSI

    NASA Technical Reports Server (NTRS)

    Shah, A. M.; Shiva, S. G.

    1981-01-01

    The details of the digital systems can be conveniently input into the design automation system by means of Hardware Description Languages (HDL). The Computer Aided Design and Test (CADAT) system at NASA MSFC is used for the LSI design. The Digital Design Language (DDL) has been selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. This paper addresses problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system.

  13. The Design Manager's Aid for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1994-01-01

    Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

  14. Expert Systems: Instructional Design Potential.

    ERIC Educational Resources Information Center

    Pollock, Joellyn; Grabinger, R. Scott

    1989-01-01

    Description of the components of expert systems highlights their potential uses in the field of instructional design. Uses of expert systems are described for determining the cost-effectiveness of instructional media; as instructional management aids; as job aids; in helping to diagnose student problems; and as student feedback/evaluation systems.…

  15. Computer aided system engineering for space construction

    NASA Technical Reports Server (NTRS)

    Racheli, Ugo

    1989-01-01

    This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

  16. Information and computer-aided system for structural materials

    NASA Astrophysics Data System (ADS)

    Nekrashevitch, Ju. G.; Nizametdinov, Sh. U.; Polkovnikov, A. V.; Rumjantzev, V. P.; Surina, O. N.; Kalinin, G. M.; Sidorenkov, A. V.; Strebkov, Ju. S.

    1992-09-01

    An information and computer-aided system for structural materials data has been developed to provide data for the fusion and fission reactor system design. It is designed for designers, industrial engineers, and material science specialists and provides a friendly interface in an interactive mode. The database for structural materials contains the master files: chemical composition, physical, mechanical, corrosion, technological properties, regulatory and technical documentation. The system is implemented on a PC/AT running the PS/2 operating system.

  17. Program Aids Analysis And Optimization Of Design

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.; Lamarsh, William J., II

    1994-01-01

    NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

  18. Multidisciplinary Expert-aided Analysis and Design (MEAD)

    NASA Technical Reports Server (NTRS)

    Hummel, Thomas C.; Taylor, James

    1989-01-01

    The MEAD Computer Program (MCP) is being developed under the Multidisciplinary Expert-Aided Analysis and Design (MEAD) Project as a CAD environment in which integrated flight, propulsion, and structural control systems can be designed and analyzed. The MCP has several embedded computer-aided control engineering (CACE) packages, a user interface (UI), a supervisor, a data-base manager (DBM), and an expert system (ES). The supervisor monitors and coordinates the operation of the CACE packages, the DBM; the ES, and the UI. The DBM tracks the control design process. Models created or installed by the MCP are tracked by date and version, and results are associated with the specific model version with which they were generated. The ES is used to relieve the control engineer from tedious and cumbersome tasks in the iterative design process. The UI provides the capability for a novice as well as an expert to utilize the MCP easily and effectively. The MCP version 2(MCP-2.0) is fully developed for flight control system design and analysis. Propulsion system modeling, analysis, and simulation is also supported; the same is true for structural models represented in state-space form. The ultimate goal is to cover the integration of flight, propulsion, and structural control engineering, including all discipline-specific functionality and interfaces. The current MCP-2.0 components and functionality are discussed.

  19. Design analysis and computer-aided performance evaluation of shuttle orbiter electrical power system. Volume 2: SYSTID user's guide

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The manual for the use of the computer program SYSTID under the Univac operating system is presented. The computer program is used in the simulation and evaluation of the space shuttle orbiter electric power supply. The models described in the handbook are those which were available in the original versions of SYSTID. The subjects discussed are: (1) program description, (2) input language, (3) node typing, (4) problem submission, and (5) basic and power system SYSTID libraries.

  20. Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Div. of Vocational Education.

    This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

  1. Memory interface simulator: A computer design aid

    NASA Technical Reports Server (NTRS)

    Taylor, D. S.; Williams, T.; Weatherbee, J. E.

    1972-01-01

    Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

  2. Design and development of computer-aided chemical systems: virtual labs for teaching chemical experiments in undergraduate and graduate courses.

    PubMed

    Luque Ruiz, I; López Espinosa, E; Cerruela García, G; Gómez-Nieto, M A

    2001-01-01

    An environment for the construction of virtual chemistry experiments is presented. This environment is based on the E(V) = M + m model-Experiment (Virtual) = Materials + method-proposed and described herein, which allows the representation and subsequent building of chemistry experiments in virtual 3D worlds to any degree of complexity. The object-based nature of the environment not only allows its use on the Internet but also facilitates integration with other systems, while enabling the system to represent and organize knowledge in such a way that it is available to any teaching environment dealing with chemical laboratory experiments. PMID:11500127

  3. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1996-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: First, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities.

  4. Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Cheng, Wan-Lee

    This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

  5. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    NASA Technical Reports Server (NTRS)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  6. The ergonomics of computer aided design within advanced manufacturing technology.

    PubMed

    John, P A

    1988-03-01

    Many manufacturing companies have now awakened to the significance of computer aided design (CAD), although the majority of them have only been able to purchase computerised draughting systems of which only a subset produce direct manufacturing data. Such companies are moving steadily towards the concept of computer integrated manufacture (CIM), and this demands CAD to address more than draughting. CAD architects are thus having to rethink the basic specification of such systems, although they typically suffer from an insufficient understanding of the design task and have consequently been working with inadequate specifications. It is at this fundamental level that ergonomics has much to offer, making its contribution by encouraging user-centred design. The discussion considers the relationships between CAD and: the design task; the organisation and people; creativity; and artificial intelligence. It finishes with a summary of the contribution of ergonomics.

  7. Design analysis and computer-aided performance evaluation of shuttle orbiter electrical power system. Volume 1: Summary

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Studies were conducted to develop appropriate space shuttle electrical power distribution and control (EPDC) subsystem simulation models and to apply the computer simulations to systems analysis of the EPDC. A previously developed software program (SYSTID) was adapted for this purpose. The following objectives were attained: (1) significant enhancement of the SYSTID time domain simulation software, (2) generation of functionally useful shuttle EPDC element models, and (3) illustrative simulation results in the analysis of EPDC performance, under the conditions of fault, current pulse injection due to lightning, and circuit protection sizing and reaction times.

  8. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes.

  9. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. PMID:24704607

  10. A Conceptual Design of a Departure Planner Decision Aid

    NASA Technical Reports Server (NTRS)

    Anagnostakis, Ioannis; Idris, Husni R.; Clark, John-Paul; Feron, Eric; Hansman, R. John; Odoni, Amedeo R.; Hall, William D.

    2000-01-01

    Terminal area Air Traffic Management handles both arriving and departing traffic. To date, research work on terminal area operations has focused primarily on the arrival flow and typically departures are taken into account only in an approximate manner. However, arrivals and departures are highly coupled processes especially in the terminal airspace, with complex interactions and sharing of the same airport resources between arrivals and departures taking place in practically every important terminal area. Therefore, the addition of automation aids for departures, possibly in co-operation with existing arrival flow automation systems, could have a profound contribution in enhancing the overall efficiency of airport operations. This paper presents the conceptual system architecture for such an automation aid, the Departure Planner (DP). This architecture can be used as a core in the development of decision-aiding systems to assist air traffic controllers in improving the performance of departure operations and optimize runway time allocation among different operations at major congested airports. The design of such systems is expected to increase the overall efficiency of terminal area operations and yield benefits for all stakeholders involved in Air Traffic Management (ATM) operations, users as well as service providers.

  11. Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems.

    PubMed

    Karataşli, Ozge; Kursoğlu, Pinar; Capa, Nuray; Kazazoğlu, Ender

    2011-01-01

    In this study, marginal adaptations of different copings fabricated with CAD/CAM or MAD/CAM were analysed. Celay and Zirkonzahn groups were fabricated by MAD/CAM, LAVA and DC-Zircon groups were fabricated by CAD/CAM. Casting metal copings were used as the control group. An implant abutment that was embedded in octagonal acrylic block was used to prepare the copings. Sixteen previously established points were marked and the measurements were performed with the stereomicroscope (at × 150). The marginal fit of the samples were evaluated by calculating the mean measurements of each 16 points. The statistical analysis was performed by Tukey multiple comparisons test at 95% confidence interval. The groups can be summarized as follows in terms of marginal gap, from the lowest to highest: LAVA (24.6 ± 14.0 µm)systems may not be the most important factor for marginal adaptation.

  12. Viral sequence diversity: challenges for AIDS vaccine designs

    PubMed Central

    McBurney, Sean P; Ross, Ted M

    2009-01-01

    Among the greatest challenges facing AIDS vaccine development is the intrinsic diversity among circulating populations of HIV-1 in various geographical locations and the need to develop vaccines that can elicit enduring protective immunity to variant HIV-1 strains. While variation is observed in all of the viral proteins, the greatest diversity is localized to the viral envelope glycoproteins, evidently reflecting the predominant role of these proteins in eliciting host immune recognition and responses that result in progressive evolution of the envelope proteins during persistent infection. Interestingly, while envelope glycoprotein variation is widely assumed to be a major obstacle to AIDS vaccine development, there is very little experimental data in animal or human lentivirus systems addressing this critical issue. In this review, the state of vaccine development to address envelope diversity will be presented, focusing on the use of centralized and polyvalent sequence design as mechanisms to elicit broadly reactive immune responses. PMID:18980542

  13. Microwave processing of a dental ceramic used in computer-aided design/computer-aided manufacturing.

    PubMed

    Pendola, Martin; Saha, Subrata

    2015-01-01

    Because of their favorable mechanical properties and natural esthetics, ceramics are widely used in restorative dentistry. The conventional ceramic sintering process required for their use is usually slow, however, and the equipment has an elevated energy consumption. Sintering processes that use microwaves have several advantages compared to regular sintering: shorter processing times, lower energy consumption, and the capacity for volumetric heating. The objective of this study was to test the mechanical properties of a dental ceramic used in computer-aided design/computer-aided manufacturing (CAD/CAM) after the specimens were processed with microwave hybrid sintering. Density, hardness, and bending strength were measured. When ceramic specimens were sintered with microwaves, the processing times were reduced and protocols were simplified. Hardness was improved almost 20% compared to regular sintering, and flexural strength measurements suggested that specimens were approximately 50% stronger than specimens sintered in a conventional system. Microwave hybrid sintering may preserve or improve the mechanical properties of dental ceramics designed for CAD/CAM processing systems, reducing processing and waiting times.

  14. Luminance in computer-aided lighting design

    SciTech Connect

    Ward, G.J.; Rubinstein, F.M.; Grynberg, A.

    1987-08-01

    Traditionally, the lighting engineering community has emphasized illuminance, the amount of light reaching a surface, as the primary design goal. The Illuminating Engineering Society (IES) provides tables of illuminances for different types of tasks which lighting engineers consult in designing lighting systems. Illuminance has proven to be a popular metric because it corresponds closely to the amount of energy needed to light a building as well as the initial cost of the lighting system. Perhaps more importantly, illuminance is easy to calculate, especially in simple unobstructed spaces with direct lighting. However,illuminance is not well correlated with visual performance, which is the real reason for installing a lighting system in the first place. Visual performance is a psychophysiological quantity that has been tied to physical quantities such as contrast, size and adaptation level by subject experiments. These physical quantities can be approximated from illuminance using a host of assumptions about the environment, or derived directly from the distribution of luminance. Luminance is the quantity of light traveling through a point in a certain direction, and it is this quantity that the eye actually sees''. However, the difficulty of calculating luminance for common tasks has made it an unpopular metric. Despite its importance to lighting design, luminance is rarely used because there is a lack of the necessary computational tools.In this paper, we will demonstrate a computer calculation of luminance that has significant advantages for lighting design. As well as providing an immediate evaluation of visual quality for task performance, less quantifiable factors such as aesthetics can be studied in synthetic images produced by the program.

  15. Luminance in computer-aided lighting design

    SciTech Connect

    Ward, G.J.; Rubinstein, F.M.; Grynberg, A.

    1987-08-01

    Traditionally, the lighting engineering community has emphasized illuminance, the amount of light reaching a surface, as the primary design goal. The Illuminating Engineering Society (IES) provides tables of illuminances for different types of tasks which lighting engineers consult in designing lighting systems. Illuminance has proven to be a popular metric because it corresponds closely to the amount of energy needed to light a building as well as the initial cost of the lighting system. Perhaps more importantly, illuminance is easy to calculate, especially in simple unobstructed spaces with direct lighting. However,illuminance is not well correlated with visual performance, which is the real reason for installing a lighting system in the first place. Visual performance is a psychophysiological quantity that has been tied to physical quantities such as contrast, size and adaptation level by subject experiments. These physical quantities can be approximated from illuminance using a host of assumptions about the environment, or derived directly from the distribution of luminance. Luminance is the quantity of light traveling through a point in a certain direction, and it is this quantity that the eye actually ``sees``. However, the difficulty of calculating luminance for common tasks has made it an unpopular metric. Despite its importance to lighting design, luminance is rarely used because there is a lack of the necessary computational tools.In this paper, we will demonstrate a computer calculation of luminance that has significant advantages for lighting design. As well as providing an immediate evaluation of visual quality for task performance, less quantifiable factors such as aesthetics can be studied in synthetic images produced by the program.

  16. A computer aided engineering tool for ECLS systems

    NASA Technical Reports Server (NTRS)

    Bangham, Michal E.; Reuter, James L.

    1987-01-01

    The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

  17. Accelerating Battery Design Using Computer-Aided Engineering Tools: Preprint

    SciTech Connect

    Pesaran, A.; Heon, G. H.; Smith, K.

    2011-01-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  18. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1994-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: first, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the dentist who will offer this new technology directly to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities.

  19. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the quality improvement program of the U.S. Department of Education's Office of Student Financial Aid (OSFA) are described. The improvement program was designed to develop a systematic approach to identify, measure, and correct errors in the student aid delivery system. Information is provided on the general approach…

  20. NASA's online machine aided indexing system

    NASA Technical Reports Server (NTRS)

    Silvester, June P.; Genuardi, Michael T.; Klingbiel, Paul H.

    1993-01-01

    This report describes the NASA Lexical Dictionary, a machine aided indexing system used online at the National Aeronautics and Space Administration's Center for Aerospace Information (CASI). This system is comprised of a text processor that is based on the computational, non-syntactic analysis of input text, and an extensive 'knowledge base' that serves to recognize and translate text-extracted concepts. The structure and function of the various NLD system components are described in detail. Methods used for the development of the knowledge base are discussed. Particular attention is given to a statistically-based text analysis program that provides the knowledge base developer with a list of concept-specific phrases extracted from large textual corpora. Production and quality benefits resulting from the integration of machine aided indexing at CASI are discussed along with a number of secondary applications of NLD-derived systems including on-line spell checking and machine aided lexicography.

  1. Critiquing the Computer-Aided Design of Dental Prostheses.

    ERIC Educational Resources Information Center

    Fitzpatrick, F. J.; And Others

    This paper describes RaPiD, a computer-aided assistant for the design of dental prostheses called removable partial dentures. The user manipulates icons directly to indicate the desired design solution to a given clinical situation. A developing design is represented as a logic database of components in a design; expert rules are applied as…

  2. A critically appraised topic review of computer-aided design/computer-aided machining of removable partial denture frameworks.

    PubMed

    Lang, Lisa A; Tulunoglu, Ibrahim

    2014-01-01

    A critically appraised topic (CAT) review is presented about the use of computer-aided design (CAD)/computer-aided machining (CAM) removable partial denture (RPD) frameworks. A systematic search of the literature supporting CAD/CAM RPD systems revealed no randomized clinical trials, hence the CAT review was performed. A PubMed search yielded 9 articles meeting the inclusion criteria. Each article was characterized by study design and level of evidence. No clinical outcomes research has been published on the use of CAD/CAM RPDs. Low levels of evidence were found in the available literature. Clinical research studies are needed to determine the efficacy of this treatment modality.

  3. From paper drawings to computer-aided design

    NASA Astrophysics Data System (ADS)

    Karima, M.; Sadhal, K. S.; McNeil, T. O.

    1985-02-01

    The benefits of a fully integrated computer-aided design and drafting system (CADDS) database are today very well accepted by industry, and major engineering companies implementing CADDS are confronted with the gigantic task of entering the existing multidisciplinary engineering information into the CADDS database. The present investigation is concerned with the findings of a feasibility study which had been conducted by a Canadian company to explore data capture on engineering drawings. A review of the state of the art in digitization is presented, and attention is given to specific problems arising in the case of the Canadian company. It is found that substantial advancements have been made toward the automatic 'reading' of existing drawings on paper media. However, no system exists currently which fully automates the data capturing process in the engineering environment and generates intelligent databases for use by CADD systems. Suitable approaches for 'data capture' under the given conditions are discussed.

  4. Direction discriminating hearing aid system

    NASA Technical Reports Server (NTRS)

    Jhabvala, M.; Lin, H. C.; Ward, G.

    1991-01-01

    A visual display was developed for people with substantial hearing loss in either one or both ears. The system consists of three discreet units; an eyeglass assembly for the visual display of the origin or direction of sounds; a stationary general purpose noise alarm; and a noise seeker wand.

  5. Computer aided microbial safety design of food processes.

    PubMed

    Schellekens, M; Martens, T; Roberts, T A; Mackey, B M; Nicolaï, B M; Van Impe, J F; De Baerdemaeker, J

    1994-12-01

    To reduce the time required for product development, to avoid expensive experimental tests, and to quantify safety risks for fresh products and the consequence of processing there is a growing interest in computer aided food process design. This paper discusses the application of hybrid object-oriented and rule-based expert system technology to represent the data and knowledge of microbial experts and food engineers. Finite element models for heat transfer calculation routines, microbial growth and inactivation models and texture kinetics are combined with food composition data, thermophysical properties, process steps and expert knowledge on type and quantity of microbial contamination. A prototype system has been developed to evaluate changes in food composition, process steps and process parameters on microbiological safety and textual quality of foods.

  6. Visual display aid for orbital maneuvering - Design considerations

    NASA Technical Reports Server (NTRS)

    Grunwald, Arthur J.; Ellis, Stephen R.

    1993-01-01

    This paper describes the development of an interactive proximity operations planning system that allows on-site planning of fuel-efficient multiburn maneuvers in a potential multispacecraft environment. Although this display system most directly assists planning by providing visual feedback to aid visualization of the trajectories and constraints, its most significant features include: (1) the use of an 'inverse dynamics' algorithm that removes control nonlinearities facing the operator, and (2) a trajectory planning technique that separates, through a 'geometric spreadsheet', the normally coupled complex problems of planning orbital maneuvers and allows solution by an iterative sequence of simple independent actions. The visual feedback of trajectory shapes and operational constraints, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool provides an example of operator-assisted optimization of nonlinear cost functions.

  7. AIDS Infects Education Systems in Africa

    ERIC Educational Resources Information Center

    Keller, Bess

    2005-01-01

    The AIDS pandemic raging across sub-Saharan Africa does not stop with personal carnage. It also threatens whole systems, including what is arguably the most critical for the region's future--education. Where rates of HIV infection are high, as they are in much of southern and eastern Africa, experts warn, the effects on social stability and…

  8. A noncontacting motion monitoring system for an astronaut translation aid

    NASA Technical Reports Server (NTRS)

    Finley, Tom D.

    1990-01-01

    The development of a noncontacting motion sensing system designed to monitor the movement of a cart along a track in the low earth orbit space environment is described. The system uses Hall effect sensors to detect the position of small permanent magnets located along the track. The measurement criteria are described, the system design is discussed, and estimates of the system error are given. The system will be used on the Crew and Equipment Translation Aid (CETA) experiment scheduled for the STS37 flight in November 1990. It will allow the position, velocity, and acceleration of the cart to be determined as it moves along the track.

  9. The polar phase response property of monopolar ECG voltages using a Computer-Aided Design and Drafting (CAD)-based data acquisition system.

    PubMed

    Goswami, B; Mitra, M; Nag, B; Mitra, T K

    1993-11-01

    The present paper discusses a Computer-Aided Design and Drafting (CAD) based data acquisition and polar phase response study of the ECG. The scalar ECG does not show vector properties although such properties are embedded in it. In the present paper the polar phase response property of monopolar chest lead (V1 to V6) ECG voltages has been studied. A software tool has been used to evaluate the relative phase response of ECG voltages. The data acquisition of monopolar ECG records of chest leads V1 to V6 from the chart recorder has been done with the help of the AutoCAD application package. The spin harmonic constituents of ECG voltages are evaluated at each harmonic plane and the polar phase responses are studied at each plane. Some interesting results have been observed in some typical cases which are discussed in the paper. PMID:8307653

  10. Expert system aid for military finance

    SciTech Connect

    Morris, J.D.; Emrich, M.L.; Hwang, Ho-Ling; Meador, M.

    1987-09-14

    Historically, budget preparation processes have been difficult to accomplish. Errors and inconsistencies cause problems for the analyst during budget review. This paper discusses the development and testing of an expert system to aid budget preparation. The prototyping tool, its capabilities, and their application are discussed. Shown are the pilot testing procedures and their role in system development. Current status and enhancements (including software updates and future testing) are also presented. 12 refs., 3 figs.

  11. Computer-aided design of GPCR ligands.

    PubMed

    Gutiérrez-de-Terán, Hugo; Keränen, Henrik; Azuaje, Jhonny; Rodríguez, David; Åqvist, Johan; Sotelo, Eddy

    2015-01-01

    The recent availability of several GPCR crystal structures now contributes decisively to the perspective of structure-based ligand design. In this context, computational approaches are extremely helpful, particularly if properly integrated in drug design projects with cooperation between computational and medicinal chemistry teams. Here, we present the pipelines used in one such project, devoted to the design of novel potent and selective antagonists for the different adenosine receptors. The details of the computational strategies are described, and particular attention is given to explain how these procedures can effectively guide the synthesis of novel chemical entities.

  12. AUV-aided Seafloor Geodetic Observation System

    NASA Astrophysics Data System (ADS)

    Mochizuki, M.; Asada, A.; Ura, T.; Fujita, M.; Colombo, O. L.; Sato, M.; Matsumoto, Y.; Tanaka, T.; Zheng, H.; Nagahashi, K.

    2007-12-01

    We launched a project supported by the Japan Society for the Science Promotion as the Grants in Aid for Scientific Research. In this project, we are aiming at developing new-generation seafloor geodetic observation system that conquers difficulties inherent with the current system. Central idea of this project is to utilize techniques of underwater robot (Autonomous Underwater Vehicle) and seafloor platform to make measurements in place of using the research vessels. Combination of underwater robot and seafloor platform make it possible to conduct the observation with selecting favorable condition of sea and GPS satellite distributions, to make much more frequent observations and to enable flexible planning of observation in response to sudden geodetic events. Trial model of the on-board and the seafloor units were finished. Space-saving design for the on-board unit, which controls both acoustic ranging system and GPS, was one of big issues to be overcome. We reviewed the current system configuration and made it simple. It was miniaturized, and then it was put into two cylinders. The cylinder No.1 contains the PHINS (IXSEA), an inertial navigation system based on fiber optic gyroscope technology. Another one, the cylinder No.2, contains the SF-2050M (NAVCOM Technology) GPS receiver and the acoustic ranging units. The original chassis of the SF-2050M was removed to minimize the volume of the unit and then only the electrical boards of the GPS receiver was installed into the cylinder No.2. There is no commercialized GPS antenna that can receive both L1 and L2 signals and has pressure capability of 2,000 m depth in the sea. Then we developed the pressure housing for the GPS antenna. The small size antenna corresponding to the L1 and L2 signals was installed in it. The transducer, for underwater acoustic ranging, employed on both the on-board and the seafloor units has been newly developed by Dr. Tom Ensign, Engineering acoustic Inc.. This transducer has a spherical

  13. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  14. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  15. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  16. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  17. A digital patient for computer-aided prosthesis design

    PubMed Central

    Colombo, Giorgio; Facoetti, Giancarlo; Rizzi, Caterina

    2013-01-01

    This article concerns the design of lower limb prosthesis, both below and above knee. It describes a new computer-based design framework and a digital model of the patient around which the prosthesis is designed and tested in a completely virtual environment. The virtual model of the patient is the backbone of the whole system, and it is based on a biomechanical general-purpose model customized with the patient's characteristics (e.g. anthropometric measures). The software platform adopts computer-aided and knowledge-guided approaches with the goal of replacing the current development process, mainly hand made, with a virtual one. It provides the prosthetics with a set of tools to design, configure and test the prosthesis and comprehends two main environments: the prosthesis modelling laboratory and the virtual testing laboratory. The first permits the three-dimensional model of the prosthesis to be configured and generated, while the second allows the prosthetics to virtually set up the artificial leg and simulate the patient's postures and movements, validating its functionality and configuration. General architecture and modelling/simulation tools for the platform are described as well as main aspects and results of the experimentation. PMID:24427528

  18. SMSaúde: Design, Development, and Implementation of a Remote/Mobile Patient Management System to Improve Retention in Care for HIV/AIDS and Tuberculosis Patients

    PubMed Central

    2015-01-01

    Background The widespread and low cost of mobile phones and the convenience of short message service (SMS) text messaging suggest potential suitability for use with alternative strategies for supporting retention in care and adherence to the treatment of various chronic diseases, such as HIV and tuberculosis (TB). Despite the growing body of literature reporting positive outcomes of SMS text message-based communication with patients, there is yet very little research about the integration of communication technologies and electronic medical records or electronic patient tracking systems. Objective To design, develop, and implement an integrated mobile phone text messaging system used to follow up with patients with HIV and TB in treatment in Mozambique. Methods Following the design science research methodology, we developed a Web-based system that provides support to patients. A case study involving three health care sites in Mozambique was a basis for discussing design issues for this kind of system. We used brainstorming techniques to solicit usability requirements, focus group meetings to discuss and define system architecture, and prototyping to test in real environments and to improve the system. Results We found six sets of system requirements that need to be addressed for success: data collection, telecommunication costs, privacy and data security, text message content, connectivity, and system scalability. A text messaging system was designed and implemented in three health facilities. These sites feed data into a central data repository, which can be used for analysis of operations and decision support. Based on the treatment schedule, the system automatically sent SMS text message appointment reminders, medication reminders, as well as motivational and educational messages to patients enrolled in antiretroviral therapy and TB treatment programs. Conclusions We successfully defined the requirements for, designed, and implemented a mobile phone text

  19. Computer aided design study of hypermixing nozzles

    NASA Technical Reports Server (NTRS)

    Mefferd, L. A.; Bevilacqua, P. M.

    1979-01-01

    The development of a nozzle which combines the hypermixing and lobe mechanisms to achieve further increases in jet entrainment and ejector performance is investigated. A computer program which incorporates a two equation turbulence model and is used to predict and compare the evolution of jets from various nozzle designs is discussed. Increasing the length of the nozzle lobes and an alternating lobe nozzle are a methods examined for increasing the entrainment rate.

  20. Rapid Geometry Creation for Computer-Aided Engineering Parametric Analyses: A Case Study Using ComGeom2 for Launch Abort System Design

    NASA Technical Reports Server (NTRS)

    Hawke, Veronica; Gage, Peter; Manning, Ted

    2007-01-01

    ComGeom2, a tool developed to generate Common Geometry representation for multidisciplinary analysis, has been used to create a large set of geometries for use in a design study requiring analysis by two computational codes. This paper describes the process used to generate the large number of configurations and suggests ways to further automate the process and make it more efficient for future studies. The design geometry for this study is the launch abort system of the NASA Crew Launch Vehicle.

  1. National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

    ERIC Educational Resources Information Center

    National Coalition for Advanced Manufacturing, Washington, DC.

    This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

  2. Automatic computer-aided system of simulating solder joint formation

    NASA Astrophysics Data System (ADS)

    Zhao, Xiujuan; Wang, Chunqing; Zheng, Guanqun; Wang, Gouzhong; Yang, Shiqin

    1999-08-01

    One critical aspect in electronic packaging is the fatigue/creep-induced failure in solder interconnections, which is found to be highly dependent on the shape of solder joints. Thus predicting and analyzing the solder joint shape is warranted. In this paper, an automatic computer-aided system is developed to simulate the formation of solder joint and analyze the influence of the different process parameters on the solder joint shape. The developed system is capable of visually designing the process parameters and calculating the solder joint shape automatically without any intervention from the user. The automation achieved will enable fast shape estimation with the variation of process parameters without time consuming experiments, and the simulating system provides the design and manufacturing engineers an efficient software tools to design soldering process in design environment. Moreover, a program developed from the system can serve as the preprocessor for subsequent finite element joint analysis program.

  3. Models of Human Information Requirements: "When Reasonable Aiding Systems Disagree"

    NASA Technical Reports Server (NTRS)

    Corker, Kevin; Pisanich, Gregory; Shafto, Michael (Technical Monitor)

    1994-01-01

    Aircraft flight management and Air Traffic Control (ATC) automation are under development to maximize the economy of flight and to increase the capacity of the terminal area airspace while maintaining levels of flight safety equal to or better than current system performance. These goals are being realized by the introduction of flight management automation aiding and operations support systems on the flight deck and by new developments of ATC aiding systems that seek to optimize scheduling of aircraft while potentially reducing required separation and accounting for weather and wake vortex turbulence. Aiding systems on both the flight deck and the ground operate through algorithmic functions on models of the aircraft and of the airspace. These models may differ from each other as a result of variations in their models of the immediate environment. The resultant flight operations or ATC commands may differ in their response requirements (e.g. different preferred descent speeds or descent initiation points). The human operators in the system must then interact with the automation to reconcile differences and resolve conflicts. We have developed a model of human performance including cognitive functions (decision-making, rule-based reasoning, procedural interruption recovery and forgetting) that supports analysis of the information requirements for resolution of flight aiding and ATC conflicts. The model represents multiple individuals in the flight crew and in ATC. The model is supported in simulation on a Silicon Graphics' workstation using Allegro Lisp. Design guidelines for aviation automation aiding systems have been developed using the model's specification of information and team procedural requirements. Empirical data on flight deck operations from full-mission flight simulation are provided to support the model's predictions. The paper describes the model, its development and implementation, the simulation test of the model predictions, and the empirical

  4. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  5. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  6. Analysis and design of a 10 to 30 kW grid-connected solar power system for the JPL fire station and first aid station

    NASA Technical Reports Server (NTRS)

    Josephs, R. H.

    1982-01-01

    The design and performance of a modestly sized utility-connected power conditioning system and its supporting photovoltaic collector are described and estimated. Utility preparations and guidelines to conform with the output of a small generating station with that of a large power network are examined.

  7. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  8. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  9. SNL Mechanical Computer Aided Design (MCAD) guide 2007.

    SciTech Connect

    Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

    2007-12-01

    This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

  10. An Author Management System and Other Computer-Based Aids to ISD.

    ERIC Educational Resources Information Center

    O'Neal, A. F.

    A brief review of some of the more important needs imposed by current and projected Department of Defense training problems is followed by descriptions of such automated aids as the LAMPS MARK III Weapons System and the Air Force's F-16 Instructional System Development (ISD) effort. These aids have been designed and developed in response to the…

  11. Using the Computer in Systems Engineering Design

    ERIC Educational Resources Information Center

    Schmidt, W.

    1970-01-01

    With the aid of the programmed computer, the systems designer can analyze systems for which certain components have not yet been manufactured or even invented, and the power of solution-technique is greatly increased. (IR)

  12. Computer aided detection system for clustered microcalcifications

    PubMed Central

    Ge, Jun; Hadjiiski, Lubomir M.; Sahiner, Berkman; Wei, Jun; Helvie, Mark A.; Zhou, Chuan; Chan, Heang-Ping

    2009-01-01

    We have developed a computer-aided detection (CAD) system to detect clustered microcalcification automatically on full-field digital mammograms (FFDMs) and a CAD system for screen-film mammograms (SFMs). The two systems used the same computer vision algorithms but their false positive (FP) classifiers were trained separately with sample images of each modality. In this study, we compared the performance of the CAD systems for detection of clustered microcalcifications on pairs of FFDM and SFM obtained from the same patient. For case-based performance evaluation, the FFDM CAD system achieved detection sensitivities of 70%, 80%, and 90% at an average FP cluster rate of 0.07, 0.16, and 0.63 per image, compared with an average FP cluster rate of 0.15, 0.38, and 2.02 per image for the SFM CAD system. The difference was statistically significant with the alternative free-response receiver operating characteristic (AFROC) analysis. When evaluated on data sets negative for microcalcification clusters, the average FP cluster rates of the FFDM CAD system were 0.04, 0.11, and 0.33 per image at detection sensitivity level of 70%, 80%, and 90%, compared with an average FP cluster rate of 0.08, 0.14, and 0.50 per image for the SFM CAD system. When evaluated for malignant cases only, the difference of the performance of the two CAD systems was not statistically significant with AFROC analysis. PMID:17264365

  13. Comments on the computer aided design of Stirling engines

    SciTech Connect

    Reader, G.T.; Taylor, D.R.

    1983-08-01

    For a number of years the research team at the Royal Naval Engineering College's Stirling Engine Research Facility (SERF) have been investigating the computer aided design of Stirling engines and these investigations have involved the study and review of existing analytical and computer techniques and the development of 'in-house' methods. In this paper these experiences are summarized against the background of the state-of-the-art in the field as represented by the existing literature. An attempt is made to delineate the various design and analytical methods available and to show that they all have their place in a fully integrated design package.

  14. The development of a spreadsheet-aided-engineering design tool for parachutes

    SciTech Connect

    Waye, D.E.; Whinery, L.D.

    1997-04-01

    A spreadsheet-aided engineering design tool has been developed to assist in the parachute design process. The new tool was developed during FY96 and utilized in the design of the flight termination parachute system for a 1900 lb. payload. Many modifications were made during the initial utilization of this tool. Work on the tool continues as the authors attempt to create an application tool for the parachute engineer.

  15. The theory, design, and operation of the suppressed carrier data-aided tracking receiver

    NASA Technical Reports Server (NTRS)

    Simon, M. K.; Springett, J. C.

    1973-01-01

    A viable, efficient, and easily mechanized carrier regenerating receiver for use in suppressed carrier-tracking system is described. The receiver referred to as a data-aided receiver (DAR) incorporates a data-aided loop (DAL) which provides the required carrier reference signal. The DAL employs the principle of decision feedback and as such is more efficient than other forms of suppressed carrier-tracking loops. The analysis, design, and implementation of the DAR are covered in detail. Performance comparisons and mechanization tradeoffs are made, wherever possible, with discrete carrier systems and other suppressed carrier systems presently in use. Experimental performance verification is given throughout in support of the theory presented.

  16. Computer-aided design of polymers and composites

    NASA Technical Reports Server (NTRS)

    Kaelble, D. H.

    1985-01-01

    This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.

  17. Computer-aided design of antenna structures and components

    NASA Technical Reports Server (NTRS)

    Levy, R.

    1976-01-01

    This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

  18. Computer-aided conceptual design of Air Cushion Vehicles

    NASA Astrophysics Data System (ADS)

    Band, E. G. U.; Lavis, D. R.

    This paper describes the development and use of a computer-aided design tool which has been used to explore preferred options for amphibious Air-Cushion Vehicle (ACV) and Surface-Effect Ship (SES) designs in support of U.S. Navy and U.S. Army programs. The tool, referred to as the ACV Design Synthesis Model (ADSM), is an interactive computer program which provides a description of feasible ACV or SES concepts that could be developed, by a competent design team, to perform the mission described by the input parameters. The paper discusses how the program was used to explore parametrically the design of a range of self-propelled hoverbarges to meet requirements of the U.S. Army Logistics Over the Shore (LOTS) phases of an amphibious landing. Examples of results are presented to illustrate the method used in determining design and performance trade-offs.

  19. Computer-Aided Design of a Sulfate Encapsulating Receptor

    SciTech Connect

    Custelcean, Radu; Bosano, Jerome J; Bonnesen, Peter V; Kertesz, Vilmos; Hay, Benjamin

    2009-01-01

    A promising new approach towards more efficient self-assembled cage receptors through computer-aided design is demonstrated. The resulting M{sub 4}L{sub 6} tetrahedral cage, internally functionalized with accurately positioned urea hydrogen-bonding groups (see structure; yellow: predicted, blue: experimental, space-filling: SO{sub 4}{sup 2-}), proved to be a remarkably strong sulfate receptor in water.

  20. Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

    PubMed Central

    Baroudi, Kusai; Ibraheem, Shukran Nasser

    2015-01-01

    Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

  1. The ethical design of an AIDS vaccine trial in Africa.

    PubMed

    Christakis, N A

    1988-01-01

    In 1987 in Zaire, a French investigator and a small group of Zairians were immunized with a French investigational AIDS vaccine. This action leads to questioning whether different sociocultural settings should have different research ethics applied, especially on pandemic diseases. Another question is to clarify the valid reasons for conducting an AIDS trial in Africa. The design of an AIDS vaccine trial should vary with the ethical and cultural factors of the research population involved, even if the epidemiological and scientific factors are the same worldwide. In Africa, study subjects meet the requirements for AIDS research: They are free from HIV infection and are at risk for the infection. However, concerns center on how to keep the subjects free from risks during the 6 months between HIV tests and how to ensure laboratory test accuracy. The applicability of the findings to that population are essential, although they may be unique to Africa. Research subjects must consent to participating in the trial and must be advised of their antibody status and of their becoming seropositive. To increase the beneficent treatment of subjects and decrease the risks, the study size should be increased and all participants should be counseled to avoid risky behaviors. A subject's family or social group may need to give consent in addition to the subject, because of cultural views. The explanation of the research must be in culturally relevant terms. Africa should have fair access to the vaccine resulting from the research. PMID:3397278

  2. Computer Aided Design of Computer Generated Holograms for electron beam fabrication

    NASA Technical Reports Server (NTRS)

    Urquhart, Kristopher S.; Lee, Sing H.; Guest, Clark C.; Feldman, Michael R.; Farhoosh, Hamid

    1989-01-01

    Computer Aided Design (CAD) systems that have been developed for electrical and mechanical design tasks are also effective tools for the process of designing Computer Generated Holograms (CGHs), particularly when these holograms are to be fabricated using electron beam lithography. CAD workstations provide efficient and convenient means of computing, storing, displaying, and preparing for fabrication many of the features that are common to CGH designs. Experience gained in the process of designing CGHs with various types of encoding methods is presented. Suggestions are made so that future workstations may further accommodate the CGH design process.

  3. New Spaces for Learning: Designing College Facilities to Utilize Instructional Aids and Media. Revised.

    ERIC Educational Resources Information Center

    Hauf, Harold D.; And Others

    Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…

  4. Computer-aided structural design of a lunar radio telescope

    NASA Technical Reports Server (NTRS)

    Akgul, Ferhat; Gerstle, Walter H.; Johnson, Stewart W.

    1990-01-01

    This paper describes a computer-aided structural design of the main reflector of a fully steerable radio telescope to be located (in the 21st century) on the moon, and presents the results of the structural analysis of the reflector. The reflector is a paraboloid with a surface area of 12,660 sq m and a focal ratio of 0.42. The reflector's surface will be covered by a 5.08 cm-thick sandwich panel made of thin-walled aluminum cells filled with low-density foam. The low weight of the design will be achieved by using graphite-epoxy as the structural material.

  5. Three-Dimensional Computer Aided Design of a Vertical Winnower

    NASA Astrophysics Data System (ADS)

    Bao, Yumei; Lin, Saijia; Weng, Lijie

    The research states home and abroad of the winnowing technology and winnowers are reviewed in brief. For the air duct, the core component of the winnower, the relevant technical parameters in the winnowing process are calculated based on the winnowing principle. The three-dimensional computer aided design (3D-CAD) software Solidworks is applied. The designed vertical winnower is able to separate different raw materials by adjusting the air speed and has been put into practical production to separate the Chinese traditional medicine with high separating effect.

  6. RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

    ERIC Educational Resources Information Center

    Stewart, John Christopher

    Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

  7. Mammographic computer-aided detection systems.

    PubMed

    2003-04-01

    While mammography is regarded as the best means available to screen for breast cancer, reading mammograms is a tedious, error-prone task. Given the repetitiveness of the process and the fact that less than 1% of mammograms in the average screening population contain cancer, it's no wonder that a significant number of breast cancers--about 28%--are missed by radiologists. The fact that human error is such a significant obstacle makes mammography screening an ideal application for computer-aided detection (CAD) systems. CAD systems serve as a "second pair of eyes" to ensure that radiologists don't miss a suspect area on an image. They analyze patterns on a digitized mammographic image, identify regions that may contain an abnormality indicating cancer, and mark these regions. The marks are then inspected and classified by a radiologist. But CAD systems provide no diagnosis of any kind--it's up to the radiologist to analyze the marked area and decide if it shows cancer. In this Evaluation, we describe the challenges posed by screening mammography, the operating principles and overall efficacy of CAD systems, and the characteristics to consider when purchasing a system. We also compare the performance of two commercially available systems, iCAD's MammoReader and R2's ImageChecker. Because the two systems offer comparable sensitivity, our judgments are based on other performance characteristics, including their ease of use, the number of false marks they produce, the degree to which they can integrate with hospital information systems, and their processing speed.

  8. Visions of visualization aids - Design philosophy and observations

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1989-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two-dimensional or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or a parsimonious description of phenomena implicit in the data. Useful visualization, in contrast to glitzy, high-tech, computer-graphics imagery, is generally based on preexisting theoretical beliefs concerning the underlying phenomena. These beliefs guide selection and formatting of the plotted variables. Visualization tools are useful for understanding naturally three-dimensional data bases such as those used by pilots or astronauts. Two examples of such aids for spatial maneuvering illustrate that informative geometric distortion may be introduced to assist visualization and that visualization of complex dynamics alone may not be adequate to provide the necessary insight into the underlying processes.

  9. An Improved Stereotactic System For CT Aided Neurosurgery

    NASA Astrophysics Data System (ADS)

    Rhodes, Michael L.; Glenn, William V., Jr.; Azzawi, Yu-Ming; Howland, Robert S.

    1982-11-01

    Several computed tomography (CT) aided stereotactic systems have been introduced during the last five years for precise placement of neurosurgical instruments. Using digital CT image data that is transformed to a patient-frame coordinate system surgery can be simulated, planned and executed with sub-millimeter precision. This paper introduces a second generation stereotactic system that improves on speed, image resolution, accuracy and patient comfort of past and current systems. The system described here is designed for surgical procedures conducted entirely in the CT suite. Geometric resolution of this system is presented, test procedures are described and phantom results are discussed. An application to percutaneous knee surgery is briefly mentioned. At this writing patient data is not yet available.

  10. MEMOS: a mobile extensible memory aid system.

    PubMed

    Schulze, Hendrik

    2004-01-01

    Memory disturbances are a frequent outcome of brain damages. Maintenance or enhancement of the patients' quality of life requires enormous effort on the part of caregivers. To support patients with brain injuries, the mobile distributed care system named MEMOS (Mobile Extensible Memory System) was designed, implemented, and tested in the day-care clinic for cognitive neurology at Leipzig University. MEMOS is implemented as a distributed system, using CORBA technologies and Enterprise Java Beans. A special palmtop computer, the Personal Memory Assistant (PMA), reminds the patient of important tasks and supervises the patient's actions. The PMA communicates with the stationary care system via a bi-directional cellular radio connection. The stationary care system was developed to be dependable and scalable. This paper describes the design and function of the MEMOS system.

  11. Aid For Simulating Digital Flight Control Systems

    NASA Technical Reports Server (NTRS)

    Hartman, Richard M.

    1991-01-01

    DIVERS translator is computer program to convert descriptions of digital flight-control systems (DFCS) into computer program. Language developed to represent design charts of DFCS. Translator converts DIVERS source code into easily transportable language, while minimizing probability that results are affected by interpretation of programmer. Final translated program used as standard of comparison to verify operation of actual flight-control systems. Applicable to simulation of other control systems; for example, electrical circuits and logic processes. Written in C.

  12. The computer-aided facial reconstruction system.

    PubMed

    Miyasaka, S; Yoshino, M; Imaizumi, K; Seta, S

    1995-06-30

    A computer imaging system was introduced into the facial reconstruction process. The system, which consists of the image processing unit for skull morphometry and the image editing unit for compositing facial components on the skull images, was an original construction. The image processor generates the framework for building a face onto the digitized skull image. For reconstructing a facial image on the framework, several possible data sets of facial components suitable for the skull morphology are selected from the database by operating our original application software. The most suitable cutout samples of facial components are pasted up over the framework in accordance with the anatomical criteria. The database of facial components consists of 24 contours, 18 eyes, 9 eyebrows, 27 noses, 9 lips and 16 hairstyles. After provisional reconstruction, the facial image is retouched by correcting skin colors and shades with an 'electronic painting device'. The resulting image is a great improvement on images made by the conventional clay and drawing method, both in the operational aspect and in the flexibility of creating multiple versions. The present system facilitates a rather objective and rapid approach and allows us easily to generate a range of possible faces. The computer-aided facial reconstruction will lead to an increase in chances of positive identification in practical cases.

  13. On the design of reversible QDCA systems.

    SciTech Connect

    DeBenedictis, Erik P.; Frank, Michael P. (Florida State University, Tallahassee, FL); Ottavi, Marco; Frost-Murphy, Sarah E.

    2006-10-01

    This work is the first to describe how to go about designing a reversible QDCA system. The design space is substantial, and there are many questions that a designer needs to answer before beginning to design. This document begins to explicate the tradeoffs and assumptions that need to be made and offers a range of approaches as starting points and examples. This design guide is an effective tool for aiding designers in creating the best quality QDCA implementation for a system.

  14. Single-tooth dento-osseous osteotomy with a computer-aided design/computer-aided manufacturing surgical guide

    PubMed Central

    2016-01-01

    This clinical note introduces a method to assist surgeons in performing single-tooth dento-osseous osteotomy. For use in this method, a surgical guide was manufactured using computer-aided design/computer-aided manufacturing technology and was based on preoperative surgical simulation data. This method was highly conducive to successful single-tooth dento-osseous segmental osteotomy. PMID:27162756

  15. CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

    ERIC Educational Resources Information Center

    Havas, George D.

    This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

  16. Visions of visualization aids: Design philosophy and experimental results

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1990-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two- or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or parsimonious description of the phenomena underlying the data. Indeed, the communication of the essential meaning of some multidimensional data may be obscured by presentation in a spatially distributed format. Useful visualization is generally based on pre-existing theoretical beliefs concerning the underlying phenomena which guide selection and formatting of the plotted variables. Two examples from chaotic dynamics are used to illustrate how a visulaization may be an aid to insight. Two examples of displays to aid spatial maneuvering are described. The first, a perspective format for a commercial air traffic display, illustrates how geometric distortion may be introduced to insure that an operator can understand a depicted three-dimensional situation. The second, a display for planning small spacecraft maneuvers, illustrates how the complex counterintuitive character of orbital maneuvering may be made more tractable by removing higher-order nonlinear control dynamics, and allowing independent satisfaction of velocity and plume impingement constraints on orbital changes.

  17. Computer-aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Shuo, Hung Chang; Huston, Ronald L.; Coy, John J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  18. Computer aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  19. Computer aided design and analysis of gear tooth geometry

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.

    1987-01-01

    A simulation method for gear hobbing and shaping of straight and spiral bevel gears is presented. The method is based upon an enveloping theory for gear tooth profile generation. The procedure is applicable in the computer aided design of standard and nonstandard tooth forms. An inverse procedure for finding a conjugate gear tooth profile is presented for arbitrary cutter geometry. The kinematic relations for the tooth surfaces of straight and spiral bevel gears are proposed. The tooth surface equations for these gears are formulated in a manner suitable for their automated numerical development and solution.

  20. Application of expert systems in project management decision aiding

    NASA Technical Reports Server (NTRS)

    Harris, Regina; Shaffer, Steven; Stokes, James; Goldstein, David

    1987-01-01

    The feasibility of developing an expert systems-based project management decision aid to enhance the performance of NASA project managers was assessed. The research effort included extensive literature reviews in the areas of project management, project management decision aiding, expert systems technology, and human-computer interface engineering. Literature reviews were augmented by focused interviews with NASA managers. Time estimation for project scheduling was identified as the target activity for decision augmentation, and a design was developed for an Integrated NASA System for Intelligent Time Estimation (INSITE). The proposed INSITE design was judged feasible with a low level of risk. A partial proof-of-concept experiment was performed and was successful. Specific conclusions drawn from the research and analyses are included. The INSITE concept is potentially applicable in any management sphere, commercial or government, where time estimation is required for project scheduling. As project scheduling is a nearly universal management activity, the range of possibilities is considerable. The INSITE concept also holds potential for enhancing other management tasks, especially in areas such as cost estimation, where estimation-by-analogy is already a proven method.

  1. Inert gas spraying device aids in repair of hazardous systems

    NASA Technical Reports Server (NTRS)

    Teleha, S.

    1965-01-01

    Inert gas spraying device aids in safely making mechanical repairs to a cryogenic fluid system without prior emptying of the system. This method can be applied to any natural or bottled gas system and with modifications to gasoline transports.

  2. GPS-Aided Tsunami Early Detection System

    NASA Astrophysics Data System (ADS)

    Song, Y. T.; Bar-Sever, Y. E.; Liu, Z.; Khachikyan, R.

    2015-12-01

    Most tsunami fatalities occur in near-field communities of earthquakes at offshore faults. Tsunami early warning is key for reducing the number of fatalities. Unfortunately, an earthquake's magnitude often does not gauge the resulting tsunami power. Here we show that real-time GPS stations along coastlines are able to detect seafloor motions due to big earthquakes, and that the detected seafloor displacements are able to determine tsunami energy and scales instantaneously for early warnings. Our method focuses on estimating tsunami energy directly from seafloor motions because a tsunami's potential or scale, no matter how it is defined, has to be proportional to the tsunami energy. Since seafloor motions are the only source of a tsunami, their estimation directly relates to the mechanism that generates tsunamis; therefore, it is a proper way of identifying earthquakes that are capable of triggering tsunamis, while being able to discriminate those particular earthquakes from false alarms. Examples of detecting the tsunami energy scales for the 2004 Sumatra M9.1 earthquake, the 2005 Nias M8.7 earthquake, the 2010 M8.8 Chilean earthquake, and the 2011 M9.0 Tohoku-Oki earthquake will be presented. The development of the Indo-Pacific GPS-Aided Tsunami Early Detection (GATED) system will be reported.

  3. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now.

  4. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  5. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

    PubMed Central

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  6. Computer aided systems human engineering: A hypermedia tool

    NASA Technical Reports Server (NTRS)

    Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

    1992-01-01

    The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

  7. Computer aided design environment for the analysis and design of multi-body flexible structures

    NASA Technical Reports Server (NTRS)

    Ramakrishnan, Jayant V.; Singh, Ramen P.

    1989-01-01

    A computer aided design environment consisting of the programs NASTRAN, TREETOPS and MATLAB is presented in this paper. With links for data transfer between these programs, the integrated design of multi-body flexible structures is significantly enhanced. The CAD environment is used to model the Space Shuttle/Pinhole Occulater Facility. Then a controller is designed and evaluated in the nonlinear time history sense. Recent enhancements and ongoing research to add more capabilities are also described.

  8. Expert system to design communications circuits

    SciTech Connect

    Tolendino, L.F.; Vahle, M.O.

    1986-07-01

    An expert system has been created to aid the design of fiber optic based communications circuits. The design system is based on an Apollo workstation, LISP and CPSL, an in-house developed expert system language. The optical circuit is taken from design specification through hardware selection and circuit routing to the production of detailed schematics and routing guides. A database containing the entire fiber optic trunk system is also maintained.

  9. Computers in engineering 1983; Proceedings of the International Conference and Exhibit, Chicago, IL, August 7-11, 1983. Volume 1 - Computer-aided design, manufacturing, and simulation

    NASA Astrophysics Data System (ADS)

    Cokonis, T. J.

    The papers presented in this volume provide examples of the impact of computers on present engineering practice and indicate some future trends in computer-aided design, manufacturing, and simulation. Topics discussed include computer-aided design of turbine cycle configuration, managing and development of engineering computer systems, computer-aided manufacturing with robots in the automotive industry, and computer-aided design/analysis techniques of composite materials in the cure phase. Papers are also presented on computer simulation of vehicular propulsion systems, the performance of a hydraulic system simulator in a CAD environment, and computer simulation of hovercraft heave dynamics and control.

  10. The application of computer-aided technologies in automotive styling design

    NASA Astrophysics Data System (ADS)

    Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

    2012-04-01

    In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

  11. The classification of AIDS cases: concordance between two AIDS surveillance systems in Italy.

    PubMed Central

    Serraino, D; Franceschi, S; Dal Maso, L; Lepri, A C; Tirelli, U; Rezza, G

    1995-01-01

    This study assessed the concordance between the transmission classification of 725 acquired immunodeficiency syndrome (AIDS) cases by the Italian AIDS Registry (the national surveillance system) and the classification of the same cases by the Italian Cooperative Group on AIDS-Related Tumors. A high degree of concordance emerged for intravenous drug users in both sexes (kappa = 0.88; 95% confidence interval [CI] = 0.84, 0.92), for homosexual men (kappa = 0.83; 95% CI = 0.79, 0.87), and for persons infected through contaminated blood or blood derivatives (kappa = 1.00). The concordance was lower among heterosexual men (kappa = 0.51; 95% CI = 0.37, 0.65) and especially among men whose risk group was not determined (kappa = 0.28; 95% CI = 0.12, 0.44). The discrepancies observed among heterosexual men indicate a need for continuing and accurate monitoring of AIDS reporting by transmission category. PMID:7625506

  12. Conceptual spacecraft systems design and synthesis

    NASA Technical Reports Server (NTRS)

    Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

    1984-01-01

    An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced Systems (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth designs is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze, and conduct parametric studies and modify earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

  13. Using a Latino Lens to Reimagine Aid Design and Delivery

    ERIC Educational Resources Information Center

    Santiago, Deborah A.

    2013-01-01

    Federal financial aid is critical to student access and success in postsecondary education for many students, including most Latinos. However, three current realities are challenging the effectiveness of federal financial aid policy today: (1) the inability of federal aid to keep pace with the increase in college costs for students; (2) the…

  14. Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.

    1992-01-01

    This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

  15. Design-based approach to ethics in computer-aided diagnosis

    NASA Astrophysics Data System (ADS)

    Collmann, Jeff R.; Lin, Jyh-Shyan; Freedman, Matthew T.; Wu, Chris Y.; Hayes, Wendelin S.; Mun, Seong K.

    1996-04-01

    A design-based approach to ethical analysis examines how computer scientists, physicians and patients make and justify choices in designing, using and reacting to computer-aided diagnosis (CADx) systems. The basic hypothesis of this research is that values are embedded in CADx systems during all phases of their development, not just retrospectively imposed on them. This paper concentrates on the work of computer scientists and physicians as they attempt to resolve central technical questions in designing clinically functional CADx systems for lung cancer and breast cancer diagnosis. The work of Lo, Chan, Freedman, Lin, Wu and their colleagues provides the initial data on which this study is based. As these researchers seek to increase the rate of true positive classifications of detected abnormalities in chest radiographs and mammograms, they explore dimensions of the fundamental ethical principal of beneficence. The training of CADx systems demonstrates the key ethical dilemmas inherent in their current design.

  16. A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

    ERIC Educational Resources Information Center

    Franken, Ken; And Others

    A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

  17. Evaluation of computer-aided design and drafting for the electric power industry. Final report

    SciTech Connect

    Anuskiewicz, T.; Barduhn, G.; Lowther, B.; Osman, I.

    1984-01-01

    This report reviews current and future computer-aided design and drafting (CADD) technology relative to utility needs and to identify useful development projects that may be undertaken by EPRI. The principal conclusions are that computer aids offer substantial cost and time savings and that computer systems are being developed to take advantage of the savings. Data bases are not available for direct communication between computers used by the power industry and will limit benefits to the industry. Recommendations are made for EPRI to take the initiative to develop the data bases for direct communication between power industry computers and to research, develop, and demonstrate new applications within the industry. Key components of a CADD system are described. The state of the art of two- and three-dimensional CADD systems to perform graphics and project management control functions are assessed. Comparison is made of three-dimensional electronic models and plastic models.

  18. Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

    NASA Technical Reports Server (NTRS)

    Kolb, Mark A.

    1990-01-01

    Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

  19. Toward implementation of a flexible hearing aid measurement system.

    PubMed

    Cudahy, E; Link, H C

    1991-06-01

    An evaluation of a computerized hearing aid measurement system was performed with input and output compression hearing aids stimulated using high-quality audio equipment. The results of the computer measurements were compared to those from a manual technique using conventional laboratory instrumentation. The results from the computerized and manual methods matched very closely. However, the computer system was found to be considerably more flexible than conventional instrumentation and was much easier to use. PMID:1939724

  20. System integration of pattern recognition, adaptive aided, upper limb prostheses

    NASA Technical Reports Server (NTRS)

    Lyman, J.; Freedy, A.; Solomonow, M.

    1975-01-01

    The requirements for successful integration of a computer aided control system for multi degree of freedom artificial arms are discussed. Specifications are established for a system which shares control between a human amputee and an automatic control subsystem. The approach integrates the following subsystems: (1) myoelectric pattern recognition, (2) adaptive computer aiding; (3) local reflex control; (4) prosthetic sensory feedback; and (5) externally energized arm with the functions of prehension, wrist rotation, elbow extension and flexion and humeral rotation.

  1. An intelligent robotic aid system for human services

    NASA Technical Reports Server (NTRS)

    Kawamura, K.; Bagchi, S.; Iskarous, M.; Pack, R. T.; Saad, A.

    1994-01-01

    The long term goal of our research at the Intelligent Robotic Laboratory at Vanderbilt University is to develop advanced intelligent robotic aid systems for human services. As a first step toward our goal, the current thrusts of our R&D are centered on the development of an intelligent robotic aid called the ISAC (Intelligent Soft Arm Control). In this paper, we describe the overall system architecture and current activities in intelligent control, adaptive/interactive control and task learning.

  2. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

  3. Automating software design system DESTA

    NASA Technical Reports Server (NTRS)

    Lovitsky, Vladimir A.; Pearce, Patricia D.

    1992-01-01

    'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer.

  4. Computer-Aided Drug Discovery and Design Targeting Ion Channels.

    PubMed

    Zhang, Qiansen; Gao, Zhaobing; Yang, Huaiyu

    2016-01-01

    Ion channels are widely expressed in living cells and play critical roles in various cellular biological functions. Dysfunctional ion channels can cause a variety of diseases, making ion channels attractive targets for drug discovery. Computational approaches, such as molecular docking and molecular dynamic simulations, provide economic and efficient tools for finding modulators of ion channels and for elucidating the action mechanisms of small molecules. In this review, we focus primarily on four types of ion channels (voltage-gated, ligand-gated, acid-sensing, and virus matrix 2 ion channels). The current advancements in computer-aided drug discovery and design targeting ion channels are summarized. First, ligand-based studies for drug design are briefly outlined. Then, we focus on the structurebased studies targeting pore domains, endogenous binding sites and allosteric sites of ion channels. Moreover, we also review the contribution of computational methods to the field of ligand binding and unbinding pathways of ion channels. Finally, we propose future developments for the field. PMID:26975507

  5. Molecular Similarity in Computer-Aided Molecular Design.

    NASA Astrophysics Data System (ADS)

    Hodgkin, Edward E.

    Available from UMI in association with The British Library. Requires signed TDF. The quantitative measurement of how similar one molecule is to another is investigated as a potential aid to molecular design. The work concentrates on the comparison of electronic properties of molecules, in particular electron density distribution, molecular electrostatic potential, molecular electric field and frontier orbital wavefunctions. A novel formula for molecular similarity has been devised and applied to these four properties. An approximate representation of valence electron density is used, based on the notion that charge distribution in a large molecule may be built from transferable contributions from its constituent functional groups. Each of these contributions consists of a series of first-order gaussian functions. The electrostatic potentials and electric fields used in the similarity calculations are computed from atom -centered partial charges. The frontier orbital wavefunction comparisons are performed using the extended Huckel method. The four measures of similarity are related to chemical and biological data and shown to have possible applications in the area of drug design.

  6. An evaluation of computer aided design of below-knee prosthetic sockets.

    PubMed

    Topper, A K; Fernie, G R

    1990-12-01

    Forty-eight below-knee amputees compared sockets designed using CANFIT computer aided design (CAD) software with sockets designed using conventional methods. Each subject was fitted by one prosthetist who used conventional techniques and one who used the CANFIT system to design the socket. Prosthetists alternated design methods for each new subject. The prosthetist using the conventional techniques was allowed up to 2 design attempts and the prosthetist using the CANFIT system was allowed up to 5 design attempts. After 2 design attempts with each method 21% of the subjects preferred the CANFIT design socket. Following up to 5 attempts 54% preferred the CANFIT designed socket. A jury of experts made an assessment of the CANFIT system and of CAD in prosthetics. The jury did not think that the version of the system tested was cost effective but that at the rate that it was improving it would become such within 3 to 5 years. The jury noted that, as well as monetary benefits, CAD presents the possibility of benefits in other areas such as research and teaching. A number of specific suggestions regarding the use and development of CAD in prosthetics were also made.

  7. Using participant observation for organizational discovery and systems analysis: global AIDS program Uganda.

    PubMed

    Pina, Jamie

    2006-01-01

    Recent scaling up of HIV/AIDS treatment at one of the Global AIDS Program's (GAP) major partner organizations required the CDC's informatics team in Uganda to develop a clinical information system during a time of significant growth and change within the organization. Analysis of system utilization revealed numerous discrepancies between system functionality and the workflow of the clinic it was designed for. Participant observation was an effective data collection method for documenting the impact of the clinical information system on the organization, and for assessing the suitability of the system for the intended clinic.

  8. Computer aided design of digital controller for radial active magnetic bearings

    NASA Technical Reports Server (NTRS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-01-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  9. Computer aided design of digital controller for radial active magnetic bearings

    NASA Astrophysics Data System (ADS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-05-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  10. Software Design Analyzer System

    NASA Technical Reports Server (NTRS)

    Tausworthe, R. C.

    1985-01-01

    CRISP80 software design analyzer system a set of programs that supports top-down, hierarchic, modular structured design, and programing methodologies. CRISP80 allows for expression of design as picture of program.

  11. Persons with Alzheimer's Disease Make Phone Calls Independently Using a Computer-Aided Telephone System

    ERIC Educational Resources Information Center

    Perilli, Viviana; Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Cordiano, Noemi; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

    2012-01-01

    This study assessed whether four patients with a diagnosis of Alzheimer's disease could make independent phone calls via a computer-aided telephone system. The study was carried out according to a non-concurrent multiple baseline design across participants. All participants started with baseline during which the telephone system was not available,…

  12. Functional Specifications for Computer Aided Training Systems Development and Management (CATSDM) Support Functions. Final Report.

    ERIC Educational Resources Information Center

    Hughes, John; And Others

    This report provides a description of a Computer Aided Training System Development and Management (CATSDM) environment based on state-of-the-art hardware and software technology, and including recommendations for off the shelf systems to be utilized as a starting point in addressing the particular systematic training and instruction design and…

  13. Computer-aided space shuttle orbiter wing design study

    NASA Technical Reports Server (NTRS)

    Phillips, W. P.; Decker, J. P.; Rau, T. R.; Glatt, C. R.

    1974-01-01

    An analytical and experimental investigation has been made to provide a space shuttle orbiter wing design that met the guideline requirements of landing performance, stability, and hypersonic trim for a specified center-of-gravity envelope. The analytical study was facilitated by the use of the Optimal Design Integration system (ODIN) and the experimental part of the investigation was conducted in the Langley low-turbulence pressure tunnel and the Langley continuous-flow hypersonic tunnel.

  14. Perceptions of the Design of Voice Output Communication Aids

    ERIC Educational Resources Information Center

    Judge, Simon; Townend, Gillian

    2013-01-01

    Background: Voice output communication aids (VOCAs) are a key form of aided communication within the field of augmentative and alternative communication (AAC). In recent years, rapid developments in technology have resulted in an explosion of devices available commercially, yet little research has been conducted into what people who use VOCAs…

  15. HIV/AIDS Community Health Information System.

    PubMed

    Fulcher, Christopher L; Kaukinen, Catherine E

    2003-01-01

    Given changes in the faces of AIDS over the last decade, it is crucial that disparities in health and access to healthcare are addressed. An Internet-based GIS was developed using ESRI's Arc Internet Map Server (Arc IMS) to provide users with a suite of tools to interact with geographic data and conduct spatial analyses related to the characteristics that promote or impede the provision of HIV-related services. Internet Mapping allows those engaged in local decision-making to: (1) geographically visualize information via the Internet; (2) Assess the relationship between the distribution of HIV services and spatially referenced socio-economic data; and (3) generate "what if" scenarios" that may direct the allocation of healthcare resources. PMID:14728567

  16. Assessment of Alternative Student Aid Delivery Systems. A Context Paper.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    Background questions to support a federally-sponsored assessment of major student aid delivery system options are addressed. Attention is directed to: (1) information needed by the U.S. Secretary of Education to decide about changes to the delivery system; (2) reasons that delivery system redesign is a critical issue; (3) what can be learned from…

  17. A research on SLAM aided INS/GPS navigation system

    NASA Astrophysics Data System (ADS)

    Cao, Menglong; Cui, Pingyuan

    2007-11-01

    Simultaneous Localization and Mapping (SLAM) aided INS/GPS navigation system is a landmark based terrain aided autonomous integrated system that has the capability for online map building and simultaneously utilizing the generated map to bind the errors in the Inertial Navigation System (INS) when GPS is not available. If GPS information is available, the SLAM integrated system builds a landmark-based map using an INS/GPS solution. If GPS is not available, the previously newly generated map is used to constrain the INS errors. The SLAM augmented INS/GPS system shows two capabilities of landmark tracking and mapping using GPS information and more importantly, aiding the INS under GPS denied situation. The validity of the proposed method is demonstrated by computer simulation.

  18. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  19. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  20. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  1. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  2. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  3. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  4. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  5. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  6. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  7. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  8. Definition of Design Case Similarity Based on Physical Quantities and Terms for Engineering Design Aid

    NASA Astrophysics Data System (ADS)

    Murakami, Tamotsu; Shimamura, Jun; Nakajima, Naomasa

    This paper proposes computerized methods of case-based design aid using similarity and relevance between design cases. First, we introduce methods of describing and recording design cases and design modification cases by physical quantities and their calculations to represent physical phenomena and terms to explain them. Then, we introduce a quantity dimension space defined by nine fundamental and supplementary quantities in SI. In quantity dimension space, a distance between physical quantities is mathematically defined based on city-block distance, and then physical quantity similarity by dimension is defined using the physical quantity distance. Then, similarity between physical quantities is defined by combining the similarity by dimension and similarity of quantity calculation structures. Also, similarity between terms is defined by combining literal similarity and cooccurrence statistics. Finally, similarity between design (modification) cases is defined based on physical quantity similarity and term similarity. By using design case similarity, designers can retrieve and consult the similar or relevant cases to a new design problem in a design case library. Also, design modification knowledge such as “which physical quantity or design parameter should be modified to solve specific trouble” can be extracted by analyzing recorded design modification cases and clustering them using design (modification) case similarity. The proposed methods are implemented as a Lisp program and are examined through some examples.

  9. Control system design guide

    SciTech Connect

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  10. DeMAID: A Design Manager's Aide for Intelligent Decomposition user's guide

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1989-01-01

    A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, the couplings among modules and the presence of iterative loops is determined. This is important because the design manager must know how to group the modules into subsystems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information become available or as the design specifications change. The purpose of this research is to develop a knowledge-based tool called the Design Manager's Aide for Intelligent Decomposition (DeMAID) to act as an intelligent advisor for the design manager. DeMaid identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. DeMAID also provides the design manager with the capability of examining the trade-offs between sequential and parallel processing. This type of approach could lead to a substantial savings or organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams. This report serves as a User's Guide for the program.

  11. Aiding Design of Wave Energy Converters via Computational Simulations

    NASA Astrophysics Data System (ADS)

    Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

    2015-11-01

    With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

  12. PUZZLE - A program for computer-aided design of printed circuit artwork

    NASA Technical Reports Server (NTRS)

    Harrell, D. A. W.; Zane, R.

    1971-01-01

    Program assists in solving spacing problems encountered in printed circuit /PC/ design. It is intended to have maximum use for two-sided PC boards carrying integrated circuits, and also aids design of discrete component circuits.

  13. Improving radiation survey data using CADD/CAE (computer-aided design and drafting computer-aided engineering)

    SciTech Connect

    Palau, G.L.; Tarpinian, J.E.

    1987-01-01

    A new application of computer-aided design and drafting (CADD) and computer-aided engineering (CAE) at the Three Mile Island Unit 2 (TMI-2) cleanup is improving the quality of radiation survey data taken in the plant. The use of CADD/CAE-generated survey maps has increased both the accuracy of survey data and the capability to perform analyses with these data. In addition, health physics technician manhours and radiation exposure can be reduced in situations where the CADD/CAE-generated drawings are used for survey mapping.

  14. Designing and Implementing an Educational Program on AIDS for Minority Childbearing Women To Enhance AIDS Awareness.

    ERIC Educational Resources Information Center

    Nimphius, Gail M.

    Ignorance, misinformation, and a failure to personalize the risk for acquisition of the Acquired Immune Deficiency Syndrome (AIDS) virus has created a situation in which the incidence of Human Immunodeficiency Virus (HIV) seroprevalence among minority childbearing women in a Florida county is increasing. An increased incidence in this population…

  15. Vision aided inertial navigation system augmented with a coded aperture

    NASA Astrophysics Data System (ADS)

    Morrison, Jamie R.

    plate aperture produces diffraction patterns that change the shape of the focal blur pattern. When used as an aperture, the Fresnel zone plate produces multiple focal planes in the scene. The interference between the multiple focal planes produce changes in the aperture that can be observed both between the focal planes and beyond the most distant focal plane. The Fresnel zone plate aperture and lens may be designed to change in the focal blur pattern at greater depths, thereby improving measurement performance of the coded aperture system. This research provides an in-depth study of the Fresnel zone plate used as a coded aperture, and the performance improvement obtained by augmenting a single camera vision aided inertial navigation system with a Fresnel zone plate coded aperture. Design and analysis of a generalized coded aperture is presented and demonstrated, and special considerations for the Fresnel zone plate are given. Also techniques to determine a continuous depth measurement from a coded image are presented and evaluated through measurement. Finally the measurement results from different aperture configurations are statistically modeled and compared with a simulated vision aided navigation environment to predict the change in performance of a vision aided inertial navigation system when augmented with a coded aperture.

  16. A Model for Intelligent Computer-Aided Education Systems.

    ERIC Educational Resources Information Center

    Du Plessis, Johan P.; And Others

    1995-01-01

    Proposes a model for intelligent computer-aided education systems that is based on cooperative learning, constructive problem-solving, object-oriented programming, interactive user interfaces, and expert system techniques. Future research is discussed, and a prototype for teaching mathematics to 10- to 12-year-old students is appended. (LRW)

  17. Computer-Aided Communication Satellite System Analysis and Optimization.

    ERIC Educational Resources Information Center

    Stagl, Thomas W.; And Others

    Various published computer programs for fixed/broadcast communication satellite system synthesis and optimization are discussed. The rationale for selecting General Dynamics/Convair's Satellite Telecommunication Analysis and Modeling Program (STAMP) in modified form to aid in the system costing and sensitivity analysis work in the Program on…

  18. Toward Computer-Aided Affective Learning Systems: A Literature Review

    ERIC Educational Resources Information Center

    Moridis, C. N.; Economides, A. A.

    2008-01-01

    The aim of this survey is to provide an overview of the various components of "computer aided affective learning systems." The research is classified into 3 main scientific areas that are integral parts of the development of these kinds of systems. The three main scientific areas are: i) emotions and their connection to learning; ii) affect…

  19. DeMAID/GA USER'S GUIDE Design Manager's Aid for Intelligent Decomposition with a Genetic Algorithm

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool that is available to aid in this decision making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial release of DEMAID in 1989, numerous enhancements have been added to aid the design manager in saving both cost and time in a design cycle. The key enhancement is a genetic algorithm (GA) and the enhanced version is called DeMAID/GA. The GA orders the sequence of design processes to minimize the cost and time to converge to a solution. These enhancements as well as the existing features of the original version of DEMAID are described. Two sample problems are used to show how these enhancements can be applied to improve the design cycle. This report serves as a user's guide for DeMAID/GA.

  20. Key Factors of Circulation System Analysis and Design

    ERIC Educational Resources Information Center

    McGee, Rob

    1972-01-01

    Explained are basic concepts and components that are common to manual, machine-aided, and computer-based systems, and their significance as key factors in the analysis and design of academic library circulation systems is documented. (2 references) (Author)

  1. Computer-aided protective system (CAPS)

    SciTech Connect

    Squire, R.K.

    1988-01-01

    A method of improving the security of materials in transit is described. The system provides a continuously monitored position location system for the transport vehicle, an internal computer-based geographic delimiter that makes continuous comparisons of actual positions with the preplanned routing and schedule, and a tamper detection/reaction system. The position comparison is utilized to institute preprogrammed reactive measures if the carrier is taken off course or schedule, penetrated, or otherwise interfered with. The geographic locater could be an independent internal platform or an external signal-dependent system utilizing GPS, Loran or similar source of geographic information; a small (micro) computer could provide adequate memory and computational capacity; the insurance of integrity of the system indicates the need for a tamper-proof container and built-in intrusion sensors. A variant of the system could provide real-time transmission of the vehicle position and condition to a central control point for; such transmission could be encrypted to preclude spoofing.

  2. Integrated computer-aided retinal photocoagulation system

    NASA Astrophysics Data System (ADS)

    Barrett, Steven F.; Wright, Cameron H. G.; Oberg, Erik D.; Rockwell, Benjamin A.; Cain, Clarence P.; Jerath, Maya R.; Rylander, Henry G., III; Welch, Ashley J.

    1996-05-01

    Successful retinal tracking subsystem testing results in vivo on rhesus monkeys using an argon continuous wave laser and an ultra-short pulse laser are presented. Progress on developing an integrated robotic retinal laser surgery system is also presented. Several interesting areas of study have developed: (1) 'doughnut' shaped lesions that occur under certain combinations of laser power, spot size, and irradiation time complicating measurements of central lesion reflectance, (2) the optimal retinal field of view to achieve simultaneous tracking and lesion parameter control, and (3) a fully digital versus a hybrid analog/digital tracker using confocal reflectometry integrated system implementation. These areas are investigated in detail in this paper. The hybrid system warrants a separate presentation and appears in another paper at this conference.

  3. Computer aided process planning and die design in simulation environment in sheet metal forming

    NASA Astrophysics Data System (ADS)

    Tisza, Miklós; Lukács, Zsolt

    2013-12-01

    During the recent 10-15 years, Computer Aided Process Planning and Die Design evolved as one of the most important engineering tools in sheet metal forming, particularly in the automotive industry. This emerging role is strongly emphasized by the rapid development of Finite Element Modeling, as well. The purpose of this paper is to give a general overview about the recent achievements in this very important field of sheet metal forming and to introduce some special results in this development activity. Therefore, in this paper, an integrated process simulation and die design system developed at the University of Miskolc, Department of Mechanical Engineering will be analyzed. The proposed integrated solutions have great practical importance to improve the global competitiveness of sheet metal forming in the very important segment of industry. The concept described in this paper may have specific value both for process planning and die design engineers.

  4. A decision support system for AIDS intervention and prevention.

    PubMed

    Xu, L D

    1994-08-01

    In recent years, the importance of information systems has been identified as a vital issue to continuing success in AIDS intervention and prevention (AIP). The advances in information technology have resulted in integrative information systems including decision support systems (DSS). The concept of DSS for AIP was created at the intersection of two trends. The first trend was a growing belief that AIP information systems are successful in automating operations in AIP programs. The second was a continuing improvement in modeling and software development in the AIP area. This paper presents an integrated DSS for AIP. The system is integrated with a database and achieves its efficiency by incorporating various algorithms and models to support AIP decision processes. The application examples include screening AIDS-risky behaviors, evaluating educational interventions, and scheduling AIP sessions. The implementation results present evidence of the usefulness of the system in AIP.

  5. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

  6. Design and implementation of a bluetooth-based band-aid pulse rate sensor

    NASA Astrophysics Data System (ADS)

    Kumar, Prashanth S.; Oh, Sechang; Rai, Pratyush; Kwon, Hyeokjun; Banerjee, Nilanjan; Varadan, Vijay K.

    2011-04-01

    Remote patient monitoring systems capable of collecting vital patient data such as blood pressure readings, Electrocardiograph (ECG) waveforms, and heart rate can obviate the need for repeated visits to the hospital. Moreover, such systems that continuously monitor the human physiology can provide valuable data to prognosticate the onset of critical health problems. The key to such remote health diagnostics is the design of minimally intrusive, low cost sensors that do not impede a patient's quotidian life but at the same time collect reliable noise free data. To this end, in this paper, we design and implement a Bluetooth-based wireless sensor system with a disposable sensor element and a reusable wireless component that can be worn as a "band-aid". The sensor is a piezoelectric polymer film placed on the wrist in proximity to the radial artery. The band-aid sized sensor allows non-intrusive monitoring of the pulsatile flow of blood in the artery. The sensor, using the Bluetooth module, can communicate with any Bluetooth enabled computer, mobile phone, or PDA. The data collected from the patient can be remotely viewed and analyzed by a physician.

  7. Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

    ERIC Educational Resources Information Center

    McGrann, Roy T. R.

    2006-01-01

    Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

  8. Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

    ERIC Educational Resources Information Center

    Gosman, A. D.; And Others

    1979-01-01

    Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

  9. Accelerating Design of Batteries Using Computer-Aided Engineering Tools (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.

    2010-11-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  10. Computer-Aided Design and Computer-Aided Manufacturing Hydroxyapatite/Epoxide Acrylate Maleic Compound Construction for Craniomaxillofacial Bone Defects.

    PubMed

    Zhang, Lei; Shen, Shunyao; Yu, Hongbo; Shen, Steve Guofang; Wang, Xudong

    2015-07-01

    The aim of this study was to investigate the use of computer-aided design and computer-aided manufacturing hydroxyapatite (HA)/epoxide acrylate maleic (EAM) compound construction artificial implants for craniomaxillofacial bone defects. Computed tomography, computer-aided design/computer-aided manufacturing and three-dimensional reconstruction, as well as rapid prototyping were performed in 12 patients between 2008 and 2013. The customized HA/EAM compound artificial implants were manufactured through selective laser sintering using a rapid prototyping machine into the exact geometric shapes of the defect. The HA/EAM compound artificial implants were then implanted during surgical reconstruction. Color-coded superimpositions demonstrated the discrepancy between the virtual plan and achieved results using Geomagic Studio. As a result, the HA/EAM compound artificial bone implants were perfectly matched with the facial areas that needed reconstruction. The postoperative aesthetic and functional results were satisfactory. The color-coded superimpositions demonstrated good consistency between the virtual plan and achieved results. The three-dimensional maximum deviation is 2.12 ± 0.65  mm and the three-dimensional mean deviation is 0.27 ± 0.07  mm. No facial nerve weakness or pain was observed at the follow-up examinations. Only 1 implant had to be removed 2 months after the surgery owing to severe local infection. No other complication was noted during the follow-up period. In conclusion, computer-aided, individually fabricated HA/EAM compound construction artificial implant was a good craniomaxillofacial surgical technique that yielded improved aesthetic results and functional recovery after reconstruction.

  11. Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle.

    PubMed

    Lin, W S; Zandinejad, A; Metz, M J; Harris, B T; Morton, D

    2015-01-01

    The purpose of this case report was to present the use of a contemporary digital photograph-assisted virtual smile design principle, an intraoral digital impression, and computer-aided design/computer-aided manufacture-fabricated lithium disilicate ceramic veneers to treat a patient with esthetic needs in the maxillary anterior region. By using the proposed digital restorative work flow, this case report demonstrated an effective communication pathway between the patient, clinician, and dental laboratory technician. Effective communication can help to achieve a more predictable and satisfactory esthetic outcome.

  12. Computer-Aided Personalized System of Instruction: A Program Evaluation.

    ERIC Educational Resources Information Center

    Pear, Joseph J.; Novak, Mark

    1996-01-01

    Presents an evaluation of a computer-aided personalized system of instruction program in two undergraduate psychology courses. The computer presented short essay tests and arranged for students who had completed various assignments satisfactorily to help evaluate other students' mastery of those assignments. Student response generally was…

  13. The Design and Production of a Procedure Training Aid Using the Procedure Learning Format and the Computer Automated Page Layout (PLA) Routine. Technical Note 12-83.

    ERIC Educational Resources Information Center

    Terrell, William R.; And Others

    This report describes a field application of the Computer Automated Page Layout (PLA) system to the development of a procedure training aid for the SH-3D/H Helicopter, as part of the Training Analysis and Evaluation Group's (TAEG) ongoing development effort to provide tools for the design and publication of technical training aids in a format…

  14. Microcomputed tomography marginal fit evaluation of computer-aided design/computer-aided manufacturing crowns with different methods of virtual model acquisition.

    PubMed

    das Neves, Flavio Domingues; do Prado, Celio Jesus; Prudente, Marcel Santana; Carneiro, Thiago Almeida Prado Naves; Zancope, Karla; Davi, Leticia Resende; Mendonca, Gustavo; Cooper, Lyndon; Soares, Carlos Jose

    2015-01-01

    This in vitro study used microcomputed tomography to evaluate the marginal fit of crowns fabricated using a chairside computer-aided design/computer-aided manufacturing (CAD/CAM) system with different methods of virtual model acquisition. Crowns were fabricated to fit in a cast containing a single human premolar. Four methods of virtual model acquisition were used: Group 1 (control), digital impressioning of a typodont; Group 2, digital impressioning of a powdered typodont; Group 3, digital impressioning of a regular impression; and Group 4, digital impressioning of a master cast. Statistically significant differences were found between the marginal gap of Group 2 and the other groups (P < 0.05); no differences were found among Groups 1, 3, and 4. The results showed that crowns fabricated using the chairside CAD/CAM system exhibited significantly smaller vertical misfit when a thin layer of powder was applied over the typodont before digital impressioning.

  15. Computer-aided engineering of energy systems

    SciTech Connect

    Gaggioli, R.A.

    1986-01-01

    This book presents that papers given at a conference on computer calculations of the thermodynamics of energy systems. Topics considered at the conference included exergy saving, thermoeconomic cost, heat exchanger networks, integrated coal gasification-combined cycle power plants, computer graphics, second law analysis of diesel engines, cogenerating gas turbine plants, exergy analysis of heat transfer, water absorption heat pumps, the thermodynamics of wood combustion, second law efficiency and costing analysis of a combined power and desalination plant, and pressure-driven temperature separation in liquids.

  16. Design of multivariable feedback control systems via spectral assignment

    NASA Technical Reports Server (NTRS)

    Mielke, R. R.; Tung, L. J.; Marefat, M.

    1983-01-01

    The applicability of spectral assignment techniques to the design of multivariable feedback control systems was investigated. A fractional representation design procedure for unstable plants is presented and illustrated with an example. A computer aided design software package implementing eigenvalue/eigenvector design procedures is described. A design example which illustrates the use of the program is explained.

  17. Aid effectiveness in rebuilding the Afghan health system: A reflection

    PubMed Central

    Dalil, Suraya; Newbrander, William; Loevinsohn, Benjamin; Naeem, Ahmad Jan; Griffin, James; Salama, Peter; Momand, Faiz Mohammad

    2014-01-01

    The Paris Declaration defined five components of aid effectiveness: ownership, alignment, harmonisation, managing for results and mutual accountability. Afghanistan, which has received a high level of donor aid for health since 2002, has seen significant improvements in health indicators, expanded access to health services and an increased range of services. Do the impressive health outcomes in this fragile state mean that aid has been effectively utilised? The factors that contributed to the success of the Ministry of Public Health (MOPH)-donor partnership include as follows: Ownership: a realistic role for the MOPH as the steward of the health sector that was clearly articulated to all stakeholders; Donor alignment: donor coordination and collaboration initiated by the MOPH; Joint decisions: participatory decision-making by the MOPH and donors, such as the major decision to use contracts with nongovernmental organisations for health service delivery; Managing for results: basing programmes on available evidence, supplementing that evidence where possible and performance monitoring of health-sector activities using multiple data sources; Reliable aid flows: the availability of sufficient donor funding for more than 10 years for MOPH priorities, such as the Basic Package of Health Services, and other programmes that boosted system development and capacity building; Human factors: these include a critical mass of individuals with the right experience and expertise being deployed at the right time and able to look beyond agency mandates and priorities to support sector reform and results. These factors, which made aid to Afghanistan effective, can be applied in other countries. PMID:24922192

  18. Aid effectiveness in rebuilding the Afghan health system: a reflection.

    PubMed

    Dalil, Suraya; Newbrander, William; Loevinsohn, Benjamin; Naeem, Ahmad Jan; Griffin, James; Salama, Peter; Momand, Faiz Mohammad

    2014-01-01

    The Paris Declaration defined five components of aid effectiveness: ownership, alignment, harmonisation, managing for results and mutual accountability. Afghanistan, which has received a high level of donor aid for health since 2002, has seen significant improvements in health indicators, expanded access to health services and an increased range of services. Do the impressive health outcomes in this fragile state mean that aid has been effectively utilised? The factors that contributed to the success of the Ministry of Public Health (MOPH)-donor partnership include as follows: Ownership: a realistic role for the MOPH as the steward of the health sector that was clearly articulated to all stakeholders; Donor alignment: donor coordination and collaboration initiated by the MOPH; Joint decisions: participatory decision-making by the MOPH and donors, such as the major decision to use contracts with nongovernmental organisations for health service delivery; Managing for results: basing programmes on available evidence, supplementing that evidence where possible and performance monitoring of health-sector activities using multiple data sources; Reliable aid flows: the availability of sufficient donor funding for more than 10 years for MOPH priorities, such as the Basic Package of Health Services, and other programmes that boosted system development and capacity building; Human factors: these include a critical mass of individuals with the right experience and expertise being deployed at the right time and able to look beyond agency mandates and priorities to support sector reform and results. These factors, which made aid to Afghanistan effective, can be applied in other countries. PMID:24922192

  19. Analyzing Automated Instructional Systems: Metaphors from Related Design Professions.

    ERIC Educational Resources Information Center

    Jonassen, David H.; Wilson, Brent G.

    Noting that automation has had an impact on virtually every manufacturing and information operation in the world, including instructional design (ID), this paper suggests three basic metaphors for automating instructional design activities: (1) computer-aided design and manufacturing (CAD/CAM) systems; (2) expert system advisor systems; and (3)…

  20. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2010-04-01 2010-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  1. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2013-04-01 2013-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  2. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2012-04-01 2012-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  3. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2011-04-01 2011-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  4. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2014-04-01 2014-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  5. Combining principles of Cognitive Load Theory and diagnostic error analysis for designing job aids: Effects on motivation and diagnostic performance in a process control task.

    PubMed

    Kluge, Annette; Grauel, Britta; Burkolter, Dina

    2013-03-01

    Two studies are presented in which the design of a procedural aid and the impact of an additional decision aid for process control were assessed. In Study 1, a procedural aid was developed that avoids imposing unnecessary extraneous cognitive load on novices when controlling a complex technical system. This newly designed procedural aid positively affected germane load, attention, satisfaction, motivation, knowledge acquisition and diagnostic speed for novel faults. In Study 2, the effect of a decision aid for use before the procedural aid was investigated, which was developed based on an analysis of diagnostic errors committed in Study 1. Results showed that novices were able to diagnose both novel faults and practised faults, and were even faster at diagnosing novel faults. This research contributes to the question of how to optimally support novices in dealing with technical faults in process control.

  6. Assessment of Alternative Student Aid Delivery Systems: Analytic Agenda for the Current System.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    A guide for analyzing the effects of the current student aid delivery system and for estimating the effects of system alternatives is presented. Attention is directed to measures, data sources, and analysis methods needed to evaluate the effects of each delivery system activity on the various participants (e.g., lenders, financial aid applicants,…

  7. Designing optimal transportation networks: a knowledge-based computer-aided multicriteria approach

    SciTech Connect

    Tung, S.I.

    1986-01-01

    The dissertation investigates the applicability of using knowledge-based expert systems (KBES) approach to solve the single-mode (automobile), fixed-demand, discrete, multicriteria, equilibrium transportation-network-design problem. Previous works on this problem has found that mathematical programming method perform well on small networks with only one objective. Needed is a solution technique that can be used on large networks having multiple, conflicting criteria with different relative importance weights. The KBES approach developed in this dissertation represents a new way to solve network design problems. The development of an expert system involves three major tasks: knowledge acquisition, knowledge representation, and testing. For knowledge acquisition, a computer aided network design/evaluation model (UFOS) was developed to explore the design space. This study is limited to the problem of designing an optimal transportation network by adding and deleting capacity increments to/from any link in the network. Three weighted criteria were adopted for use in evaluating each design alternative: cost, average V/C ratio, and average travel time.

  8. Computer-Aided Engineering of Batteries for Designing Better Li-Ion Batteries (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.; Lee, K. J.; Santhanagopalan, S.

    2012-02-01

    This presentation describes the current status of the DOE's Energy Storage R and D program, including modeling and design tools and the Computer-Aided Engineering for Automotive Batteries (CAEBAT) program.

  9. Computer aided design of microcircuits. Citations from the NTIS data base

    NASA Astrophysics Data System (ADS)

    Reed, W. E.

    1980-09-01

    Government sponsored research covering the computer aided design, modeling, layout, and packaging of integrated and other microelectronic circuits are cited. Computer programs and the use of computer graphics are included.

  10. An Investigation into Computer Aided Drafting and Design (CADD) in the Saginaw Area from the Viewpoint of Mechanical Drafting and Design Employers.

    ERIC Educational Resources Information Center

    Irwin, John L.

    The extent to which computer-aided drafting and design (CADD) was being used in local businesses in Saginaw, Michigan, was investigated. Focuses of a literature review were types of CADD systems, categories of CADD users, and the symbiotic relationship between industry and education in providing CADD training. The survey questionnaire was…

  11. Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

    NASA Technical Reports Server (NTRS)

    Wuerer, J. E.; Gran, M.; Held, T. W.

    1994-01-01

    The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

  12. Making the health care system 'safe' for persons with HIV infection or AIDS.

    PubMed Central

    Kimball, A M; Lafferty, B; Shields, A; Smyser, M

    1995-01-01

    If health care reform is implemented in states and nationally, the safety of this process needs to be examined for persons with human immunodeficiency virus (HIV) infection or the acquired immunodeficiency syndrome (AIDS). Reform should assure ongoing prevention and transmission control of HIV and continuous coverage of medical costs for persons ill with HIV or AIDS. These persons currently benefit from various state and federal categoric programs designed to assure access to preventive and personal care services. Washington State has passed health care reform legislation that envisions integrating these programs to provide a system of population-based and personal health care. This legislation was analyzed using existing epidemiologic and entitlement information about persons with HIV infection or AIDS in the state to assess its effect. The relationship between public health and personal care services will be a central concern for those with HIV infection or AIDS, and complete coverage of this group may be achieved relatively late in the process of implementing health care reform. Health personnel planning under health care reform will affect the delivery of HIV- and AIDS-related services. Including treatment of AIDS in the basic benefit package merits particular attention. These issues parallel those being faced by the nation as a whole as it seeks to ensure epidemic disease control and compassionate care for long-term disabling illness if health care reform is implemented. Images PMID:7725706

  13. Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks

    PubMed Central

    Andreiuolo, Rafael Ferrone; Sabrosa, Carlos Eduardo; Dias, Katia Regina H. Cervantes

    2013-01-01

    The use of bi-layered all-ceramic crowns has continuously grown since the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia cores. Unfortunately, despite the outstanding mechanical properties of zirconia, problems related to porcelain cracking or chipping remain. One of the reasons for this is that ceramic copings are usually milled to uniform thicknesses of 0.3-0.6 mm around the whole tooth preparation. This may not provide uniform thickness or appropriate support for the veneering porcelain. To prevent these problems, the dual-scan technique demonstrates an alternative that allows the restorative team to customize zirconia CAD/CAM frameworks with adequate porcelain thickness and support in a simple manner. PMID:24966718

  14. Control system design method

    DOEpatents

    Wilson, David G.; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  15. Interface load analysis for computer-aided design of below-knee prosthetic sockets.

    PubMed

    Reynolds, D P; Lord, M

    1992-07-01

    A finite-element analysis is made for the compression of soft tissues of the residual lower limb contained in a prosthetic socket. The analysis is relevant to static loading during stance in a patellar-tendon-bearing, below-knee design of socket. Values of Young's modulus are obtained experimentally for use in the model. One of the main objectives is to study the sensitivity of the loading to these values and also to other assumed conditions. Using direct pressure at the limb/socket interface and vertical stiffness as indicators, changes in material properties, socket alignment and socket rectification are investigated; assumptions about the frictional characteristic at the interface are seen to be critical in determination of load distribution. This type of analysis may provide the next stage of refinement for computer-aided socket design systems.

  16. A review of HIV/AIDS system-level interventions

    PubMed Central

    Bauermeister, José A.; Tross, Susan; Ehrhardt, Anke A.

    2010-01-01

    The escalating HIV/AIDS epidemic worldwide demands that on-going prevention efforts be strengthened, disseminated, and scaled-up. System-level interventions refer to programs aiming to improve the functioning of an agency as well as the delivery of its services to the community. System-level interventions are a promising approach to HIV/AIDS prevention because they focus on (a) improving the agency’s ability to adopt evidence-based HIV prevention and care programs; (b) develop and establish policies and procedures that maximize the sustainability of on-going prevention and care efforts; and (c) improve decision-making processes such as incorporating the needs of communities into their tailored services. We reviewed studies focusing on system-level interventions by searching multiple electronic abstracting indices, including PsycInfo, PubMed, and ProQuest. Twenty-three studies out of 624 peer-reviewed studies (published from January 1985 to February 2007) met study criteria. Most of the studies focused on strengthening agency infrastructure, while other studies included collaborative partnerships and technical assistance programs. Our findings suggest that system-level interventions are promising in strengthening HIV/AIDS prevention and treatment efforts. Based on our findings, we propose recommendations for future work in developing and evaluating system-level interventions. PMID:18369722

  17. Computer-Aided Design Of Turbine Blades And Vanes

    NASA Technical Reports Server (NTRS)

    Hsu, Wayne Q.

    1988-01-01

    Quasi-three-dimensional method for determining aerothermodynamic configuration of turbine uses computer-interactive analysis and design and computer-interactive graphics. Design procedure executed rapidly so designer easily repeats it to arrive at best performance, size, structural integrity, and engine life. Sequence of events in aerothermodynamic analysis and design starts with engine-balance equations and ends with boundary-layer analysis and viscous-flow calculations. Analysis-and-design procedure interactive and iterative throughout.

  18. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    NASA Astrophysics Data System (ADS)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  19. NREL Software Aids Offshore Wind Turbine Designs (Fact Sheet)

    SciTech Connect

    Not Available

    2013-10-01

    NREL researchers are supporting offshore wind power development with computer models that allow detailed analyses of both fixed and floating offshore wind turbines. While existing computer-aided engineering (CAE) models can simulate the conditions and stresses that a land-based wind turbine experiences over its lifetime, offshore turbines require the additional considerations of variations in water depth, soil type, and wind and wave severity, which also necessitate the use of a variety of support-structure types. NREL's core wind CAE tool, FAST, models the additional effects of incident waves, sea currents, and the foundation dynamics of the support structures.

  20. Designing Menu Selection Systems.

    ERIC Educational Resources Information Center

    Schneiderman, Ben

    1986-01-01

    Focuses on the multiple design issues involved in creating successful menu selection systems: semantic organization, response time, display rates, shortcuts for frequent users, titles, phrasing of menu items, graphic layout, and selection mechanisms. Pop-up and embedded menus, experimental results, and design guidelines are also covered.…

  1. Instructional Design: System Strategies.

    ERIC Educational Resources Information Center

    Ledford, Bruce R.; Sleeman, Phillip J.

    This book is intended as a source for those who desire to apply a coherent system of instructional design, thereby insuring accountability. Chapter 1 covers the instructional design process, including: instructional technology; the role of evaluation; goal setting; the psychology of teaching and learning; task analysis; operational objectives;…

  2. The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs

    PubMed Central

    Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

    2011-01-01

    The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs. PMID:21816958

  3. The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs.

    PubMed

    Kagan, Jonathan M; Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

    2011-12-01

    The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs.

  4. Remote Systems Design & Deployment

    SciTech Connect

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  5. Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

    NASA Technical Reports Server (NTRS)

    Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

    1999-01-01

    Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

  6. Computer aided optimal design of space reflectors and radiation concentrators

    NASA Astrophysics Data System (ADS)

    Saprykin, Oleg A.; Spirochkin, Yuriy K.; Kinelev, Vladimir G.; Sulimov, Valeriy D.

    1998-06-01

    The goal of space radiation receiver design is achievement of its maximal reflecting properties under some technological and financial restrictions. Optimal design problems of this type are characterized by nonconvex nondifferentiable objective functions. A numerical technique for optimal design of the structures and an applied software REFLEX under development are proposed.

  7. Designing future photovoltaic systems

    SciTech Connect

    Jones, G.J.

    1984-01-01

    The large scale use of photovoltaic systems to generate our electricity is a dream for the future; but if this dream is to be realized, we must understand these systems today. As a result, there has been extensive research into the design and economic tradeoffs of utility interconnected photovoltaic applications. The understanding gained in this process has shown that photovoltaic system design can be a very simple and straight-forward endeavor. This paper reviews those past studies and shows how we have reached the present state of system design evolution. The concept of the utility interactive PV system with energy value determined by the utility's avoided cost will be explored. This concept simplifies the screening of potential applications for economic viability, and we will present several rules-of-thumb for this purpose.

  8. Hearing Aid-Related Standards and Test Systems.

    PubMed

    Ravn, Gert; Preves, David

    2015-02-01

    Many documents describe standardized methods and standard equipment requirements in the field of audiology and hearing aids. These standards will ensure a uniform level and a high quality of both the methods and equipment used in audiological work. The standards create the basis for measuring performance in a reproducible manner and independent from how and when and by whom parameters have been measured. This article explains, and focuses on, relevant acoustic and electromagnetic compatibility parameters and describes several test systems available. PMID:27516709

  9. CFD Aided Design and Optimization of Francis Turbine Runners

    NASA Astrophysics Data System (ADS)

    Ayancik, Fatma; Demirel, Gizem; Celebioglu, Kutay; Acar, Erdem; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Francis turbines are commonly used for hydroelectric power plants with their wide range of flow rate and head values. They are composed of five main components and they generate energy with the help of the runner connected to the generator. Therefore, runner is the most important part of a Francis turbine. All components of turbines are linked and they are designed to maximize the turbine efficiency. The dimensions of the runner vary depending on the design discharge, head and the speed of the rotor of the generators. In this study, a design methodology is developed to design turbine runners with the help of computational fluid dynamics and is applied to the runner design of three different hydroelectric power plant turbines. Multi objective design optimization is also performed and the response surfaces are investigated to obtain maximum turbine efficiency and cavitation free design. This study is financially supported by Turkish Ministry of Development.

  10. Data System Design.

    ERIC Educational Resources Information Center

    Thomas, Charles R.

    Some of the major elements of administrative information systems design as applied to higher education are described. Differences between the application of computer technology in the commercial environment and the educational environment are discussed. The major steps in systems development from problem definition through implementation are…

  11. Digital systems design language

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1979-01-01

    Digital Systems Design Language (DDL) is implemented on the SEL-32 Computer Systems. The detaileds of the language, the translator, and the simulator, and the smulator programs are given. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

  12. Use of CADD (Computer Aided Drafting and Design) in a construction setting

    SciTech Connect

    Ketcham, D.L.

    1988-01-01

    At the outset of the design for the Defense Waste Processing Facility (DWPF) it was determined to complete over 70 percent of the more than 7000 drawings on a Computer Aided Drafting and Design (CADD) system. This ambitious goal required the development of an integrated data base for plant design software systems to service a multi-discipline, engineering and management environment for the complex one-of-a-kind mega project. The implementation involved extensive training, special accounting and security provisions to meet QA requirements. It was found to be effective to train engineers as well as operators so that technical personnel could have direct access to the drawing files. This was particularly useful when designing and laying out close tolerance equipment in remotely maintained cells where clearances are critical. It was also beneficial to have the terminals located in the same areas as the engineering staff. Background drawings were maintained by one discipline and used as a reference file by the other disciplines. This reduced the chances of interferences and insured that the latest revisions were in use. 2 figs.

  13. Computer-aided design tools for economical MEMS fabrication processes

    NASA Astrophysics Data System (ADS)

    Schneider, Christian; Priebe, Andreas; Brueck, Rainer; Hahn, Kai

    1999-03-01

    Since the early 70s when microsystem technology was first introduce an enormous market for MST-products has been developed. Airbag sensors, micro pumps, ink jet nozzles etc. and the market is just about to start up. Establishing these products for a reasonable price requires mass production. Meanwhile, also computer-based design-tools have been developed in order to reduce the expenses for MST-design. In contrast to other physical design processes like e.g. in micro electronics, MEMS physical design is characterized by the fact that each product requires a tailored sequence of fabrication steps, usually selected from a variety of processing alternatives. The selection from these alternatives is based on economical constraints. Therefore, the design has a strong influence on the money and time spent to take an MST-product to market.

  14. CFD Aided Design and Production of Hydraulic Turbines

    NASA Astrophysics Data System (ADS)

    Kaplan, Alper; Cetinturk, Huseyin; Demirel, Gizem; Ayli, Ece; Celebioglu, Kutay; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Hydraulic turbines are turbo machines which produce electricity from hydraulic energy. Francis type turbines are the most common one in use today. The design of these turbines requires high engineering effort since each turbine is tailor made due to different head and discharge. Therefore each component of the turbine is designed specifically. During the last decades, Computational Fluid Dynamics (CFD) has become very useful tool to predict hydraulic machinery performance and save time and money for designers. This paper describes a design methodology to optimize a Francis turbine by integrating theoretical and experimental fundamentals of hydraulic machines and commercial CFD codes. Specific turbines are designed and manufactured with the help of a collaborative CFD/CAD/CAM methodology based on computational fluid dynamics and five-axis machining for hydraulic electric power plants. The details are presented in this study. This study is financially supported by Turkish Ministry of Development.

  15. 21 CFR 874.3950 - Transcutaneous air conduction hearing aid system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Conduction Hearing Aid System (TACHAS); Guidance for Industry and FDA.” See § 874.1 for the availability of... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Transcutaneous air conduction hearing aid system... Transcutaneous air conduction hearing aid system. (a) Identification. A transcutaneous air conduction hearing...

  16. Anti AIDS drug design with the help of neural networks

    NASA Astrophysics Data System (ADS)

    Tetko, I. V.; Tanchuk, V. Yu.; Luik, A. I.

    1995-04-01

    Artificial neural networks were used to analyze and predict the human immunodefiency virus type 1 reverse transcriptase inhibitors. Training and control set included 44 molecules (most of them are well-known substances such as AZT, TIBO, dde, etc.) The biological activities of molecules were taken from literature and rated for two classes: active and inactive compounds according to their values. We used topological indices as molecular parameters. Four most informative parameters (out of 46) were chosen using cluster analysis and original input parameters' estimation procedure and were used to predict activities of both control and new (synthesized in our institute) molecules. We applied pruning network algorithm and network ensembles to obtain the final classifier and avoid chance correlation. The increasing of neural network generalization of the data from the control set was observed, when using the aforementioned methods. The prognosis of new molecules revealed one molecule as possibly active. It was confirmed by further biological tests. The compound was as active as AZT and in order less toxic. The active compound is currently being evaluated in pre clinical trials as possible drug for anti-AIDS therapy.

  17. Assembly design system based on engineering connection

    NASA Astrophysics Data System (ADS)

    Yin, Wensheng

    2016-05-01

    An assembly design system is an important part of computer-aided design systems, which are important tools for realizing product concept design. The traditional assembly design system does not record the connection information of production on the engineering layer; consequently, the upstream design idea cannot be fully used in the downstream design. An assembly design model based on the relationship of engineering connection is presented. In this model, all nodes are divided into two categories: The component and the connection. Moreover, the product is constructed on the basis of the connection relationship of the components. The model is an And/Or graph and has the ability to record all assembly schemes. This model records only the connection information that has engineering application value in the product design. In addition, this model can significantly reduce the number of combinations, and is very favorable for the assembly sequence planning in the downstream. The system contains a connection knowledge system that can be mapped to the connection node, and the connection knowledge obtained in practice can be returned to the knowledge system. Finally, VC++ 6.0 is used to develop a prototype system called Connect-based Assembly Planning (CAP). The relationship between the CAP system and the commercial assembly design system is also established.

  18. Improved plug valve computer-aided design of plug element

    SciTech Connect

    Wordin, J.J.

    1990-02-01

    The purpose of this document is to present derivations of equations for the design of a plug valve and to present a computer program which performs the design calculations based on the derivations. The valve is based on a plug formed from a tractrix of revolution called a pseudosphere. It is of interest to be able to calculate various parameters for the plug for design purposes. For example, the surface area, volume, and center of gravity are important to determine friction and wear of the valve. A computer program in BASIC has been written to perform the design calculations. The appendix contains a computer program listing and verifications of results using approximation methods. A sample run is included along with necessary computer commands to run the program. 1 fig.

  19. WASTE REDUCTION USING COMPUTER-AIDED DESIGN TOOLS

    EPA Science Inventory

    Growing environmental concerns have spurred considerable interest in pollution prevention. In most instances, pollution prevention involves introducing radical changes to the design of processes so that waste generation is minimized.
    Process simulators can be effective tools i...

  20. Computer-Aided Apparel Design in University Curricula.

    ERIC Educational Resources Information Center

    Belleau, Bonnie D.; Bourgeois, Elva B.

    1991-01-01

    As computer-assisted design (CAD) become an integral part of the fashion industry, universities must integrate CAD into the apparel curriculum. Louisiana State University's curriculum enables students to collaborate in CAD problem solving with industry personnel. (SK)

  1. Computer-aided design of a proton pump

    NASA Technical Reports Server (NTRS)

    New, Michael H.; Pohorille, Andrew; Chang, Sherwood (Technical Monitor)

    1997-01-01

    The use of transmembrane proton gradients in energy transduction is an almost universal feature of life on earth. These proton gradients are established and maintained by specialized assemblies of proteins which actively pump protons across membranes. One broad class of proton pumps uses captured light energy to drive the proton pumping. Our goal is to elucidate the minimum structural requirements of a light-driven proton-pump. There are two basic components to a simple light-driven proton pump: a source of photo-generated protons and a "gate-keeper" which prevents these protons from reattaching themselves to their source. A wide variety of molecules in the membrane, even as simple as polycyclic aromatic hydrocarbons, are capable of releasing protons when illuminated. Our work is therefore focused on the design of the "gate-keeper." Our initial model involves a pair of proton acceptors, coupled to each other by a transient water bridge, and supported in the membrane by a small bundle of peptide helices. Upon illumination, the proton source transfers its proton to the:- first acceptor of the gate-keeper. While the reverse reaction is highly probable, all that is needed to ensure irreversibility is a nonvanishing probability that the proton will be transferred to the second acceptor across a transient water bridge. Back transfer of the proton to the first acceptor, and thence to the proton source, is impeded by the free energy required to move the proton uphill towards the. proton source and by the disruption of the transient water bridge. As a prototypical water-bridged proton transfer system, we are studying the transfer of a proton across a water bridge from a formic acid to a formate anion. With a pK(sub alpha), of 3.7. formic acid is a good model for the acidic amino acids glutamate and aspartate which are good candidates for gate-keeper proton acceptors. Simulations of proton transfer reactions in a membrane are complicated by the quantum mechanical nature of

  2. Computer system design (supermicrocomputers)

    SciTech Connect

    Warren, C.

    1983-05-26

    The main architectural differences between conventional microcomputer systems and supermicrocomputers are the following features which the latter possess: specialised bus for interprocessor communication; two or more processors, ranging from 8-bit to 48-bit-slice designs; and fast bus designs which permit data transfers by the byte or by the word. The majority of supermicrocomputers are 16-bit or 32-bit multiuser, multitasking systems able to address large amounts of physical and virtual memory. Current developments in supermicrocomputers are discussed with reference to a variety of available machines.

  3. [Computer aided design and manufacture of the porcelain fused to metal crown].

    PubMed

    Nie, Xin; Cheng, Xiaosheng; Dai, Ning; Yu, Qing; Hao, Guodong; Sun, Quanping

    2009-04-01

    In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality. PMID:19499776

  4. Computer aided solar house design made of ``Guadua`` in Bogota, Colombia

    SciTech Connect

    Lozano, M.C.; Chalfoun, N.V.

    1995-11-01

    Bogota, Colombia, is the third highest capital in South America, its location near the equator assures high altitudes over the horizon and almost 5 hours of daily mean sunshine. Since 1981, efforts for using natural energy instead of nonrenewable fuel have been targeted to Colombia`s residential construction industry. This paper focuses on a computer aided design process for passive solar low-income row housing in Bogota. Thermal comfort for this tropical climate has been achieved through employing ``Guadua,`` a strong bamboo specie,as an alternative wall system to the traditional brick, adobe, or concrete structures. Through computer analysis, several energy conservation and passive solar strategies have been optimized for a case study row housing type common to the region. The load savings compared to a 6 inch CMU house totaled 72%, while the operating cost has been reduced by 71%. Furthermore, this lightweight and inexpensive ``Guadua`` material has reduced the construction cost by 30%.

  5. Validation of space/ground antenna control algorithms using a computer-aided design tool

    NASA Technical Reports Server (NTRS)

    Gantenbein, Rex E.

    1995-01-01

    The validation of the algorithms for controlling the space-to-ground antenna subsystem for Space Station Alpha is an important step in assuring reliable communications. These algorithms have been developed and tested using a simulation environment based on a computer-aided design tool that can provide a time-based execution framework with variable environmental parameters. Our work this summer has involved the exploration of this environment and the documentation of the procedures used to validate these algorithms. We have installed a variety of tools in a laboratory of the Tracking and Communications division for reproducing the simulation experiments carried out on these algorithms to verify that they do meet their requirements for controlling the antenna systems. In this report, we describe the processes used in these simulations and our work in validating the tests used.

  6. Distributed System Design Checklist

    NASA Technical Reports Server (NTRS)

    Hall, Brendan; Driscoll, Kevin

    2014-01-01

    This report describes a design checklist targeted to fault-tolerant distributed electronic systems. Many of the questions and discussions in this checklist may be generally applicable to the development of any safety-critical system. However, the primary focus of this report covers the issues relating to distributed electronic system design. The questions that comprise this design checklist were created with the intent to stimulate system designers' thought processes in a way that hopefully helps them to establish a broader perspective from which they can assess the system's dependability and fault-tolerance mechanisms. While best effort was expended to make this checklist as comprehensive as possible, it is not (and cannot be) complete. Instead, we expect that this list of questions and the associated rationale for the questions will continue to evolve as lessons are learned and further knowledge is established. In this regard, it is our intent to post the questions of this checklist on a suitable public web-forum, such as the NASA DASHLink AFCS repository. From there, we hope that it can be updated, extended, and maintained after our initial research has been completed.

  7. Interactive computer aided design of electric machines and electromagnetic apparatus (invited)

    NASA Astrophysics Data System (ADS)

    Freeman, E. M.

    1982-11-01

    The design of electromagnetic devices in industry is still largely done using traditional techniques. Early computing facilities were costly to use and limited to alphanumeric applications. The application of numerical methods, mainly finite elements, to the solution of electromagnetic field problems, proved to be difficult to implement initially due to input/output problems. These difficulties were completely obviated by the advent of inexpensive microcomputers and low cost interactive graphics. However, it is still uncommon to find these new methods being employed as part of the normal electrical design process. Meanwhile, in parallel, there has been a massive growth of computer-aided methods applied to all aspects of mechanical engineering design and drafting, CADCAM. The trend is towards small, powerful, expandable, dedicated computer systems equipped with high resolution interactive graphics, which can be connected via a fast datalink. These are commonly available, complete with software, as turnkey systems. The advantages of CADCAM are manifold: Lower costs, higher productivity, higher quality products, with shorter lead times. The introduction of CADCAM will result in organisational as well as technical changes. The major change will be in the way people think.

  8. How AIDS funding strengthens health systems: progress in pharmaceutical management.

    PubMed

    Embrey, Martha; Hoos, David; Quick, Jonathan

    2009-11-01

    In recent years, new global initiatives responding to the AIDS crisis have dramatically affected-and often significantly improved-how developing countries procure, distribute, and manage pharmaceuticals. A number of developments related to treatment scale-up, initially focused on AIDS-related products, have created frameworks for widening access to medicines for other diseases that disproportionally impact countries with limited resources and for strengthening health systems overall. Examples of such systems strengthening have come in the areas of drug development and pricing; policy and regulation; pharmaceutical procurement, distribution, and use; and management systems, such as for health information and human resources. For example, a hospital in South Africa developed new tools to decentralize provision of antiretroviral therapy to local clinics-bringing treatment closer to patients and shifting responsibility from scarce pharmacists to lower level pharmacy staff. Successful, the system was expanded to patients with other chronic conditions, such as mental illness. Progress toward universal access to HIV prevention, treatment, care, and support will continue the push to strengthen pharmaceutical sectors that serve not only HIV-related needs but all health needs; health experts can likely take these achievements further to maximize their expansion into the wider health system. PMID:19858936

  9. TOWARD THE COMPUTER-AIDED DESIGN OF ION SEQUESTERING AGENTS

    SciTech Connect

    Hay, Benjamin

    2008-01-01

    A major impediment to introduction of new extractants to practical use is the large cost and long lead times for synthesis and testing of candidate molecules. Toward the goal of reducing this experimental burden, this talk describes a computational approach to the design of molecular receptors that are structurally organized for optimal coordination with ions. With a molecular-level understanding of how host architecture influences ion-binding affinity, it is possible to identify promising potential extractants before they are prepared and tested. Exploiting powerful concepts embodied in structure-based drug design to bear on host design, we have devised novel algorithms for building potential host structures from molecular fragments and rapid methods for comparing the binding-site organization of the resulting candidates. The result is a computer software program, called HostDesigner, which can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. The utility of this software has been illustrated in the structural design of cation receptors such as crown ethers and anion receptors bearing urea groups.

  10. A computer aided treatment event recognition system in radiation therapy

    SciTech Connect

    Xia, Junyi Mart, Christopher; Bayouth, John

    2014-01-15

    Purpose: To develop an automated system to safeguard radiation therapy treatments by analyzing electronic treatment records and reporting treatment events. Methods: CATERS (Computer Aided Treatment Event Recognition System) was developed to detect treatment events by retrieving and analyzing electronic treatment records. CATERS is designed to make the treatment monitoring process more efficient by automating the search of the electronic record for possible deviations from physician's intention, such as logical inconsistencies as well as aberrant treatment parameters (e.g., beam energy, dose, table position, prescription change, treatment overrides, etc). Over a 5 month period (July 2012–November 2012), physicists were assisted by the CATERS software in conducting normal weekly chart checks with the aims of (a) determining the relative frequency of particular events in the authors’ clinic and (b) incorporating these checks into the CATERS. During this study period, 491 patients were treated at the University of Iowa Hospitals and Clinics for a total of 7692 fractions. Results: All treatment records from the 5 month analysis period were evaluated using all the checks incorporated into CATERS after the training period. About 553 events were detected as being exceptions, although none of them had significant dosimetric impact on patient treatments. These events included every known event type that was discovered during the trial period. A frequency analysis of the events showed that the top three types of detected events were couch position override (3.2%), extra cone beam imaging (1.85%), and significant couch position deviation (1.31%). The significant couch deviation is defined as the number of treatments where couch vertical exceeded two times standard deviation of all couch verticals, or couch lateral/longitudinal exceeded three times standard deviation of all couch laterals and longitudinals. On average, the application takes about 1 s per patient when

  11. Maglev system design considerations

    SciTech Connect

    Coffey, H.T.

    1991-01-01

    Although efforts are now being made to develop magnetic levitation technologies in the United States, they have been underway for two decades in Germany and Japan. The characteristics of maglev systems being considered for implementation in the United States are speculative. A conference was held at Argonne National Laboratory on November 28--29, 1990, to discuss these characteristics and their implications for the design requirements of operational systems. This paper reviews some of the factors considered during that conference.

  12. Laser Communication System Design

    NASA Astrophysics Data System (ADS)

    Casey, W. L.; Doughty, G. R.; Houston, , J. G.; Marston, R. K.; O'Pella, L. J.; Vo, L. V.

    1988-11-01

    The Air Force is interested in laser communication systems for a variety of air-to-air applications. Laser data transmission offers significant advantages over RF systems in certain areas including higher data rates with low transmitter power, narrower beam divergence leading to difficulty in interception, narrower field of view coupled with high off-axis energy rejection which makes jamming a very formidable task, and smaller antenna size which creates minimum installation impact on an aircraft. The applications with the greatest near-term potential involve the transfer of data between large aircraft operating in relatively benign dynamic environments normally present at altitudes of about 30,000 feet. Systems performing these strategic data exchange (SDE) functions must operate at ranges of 100 to 200 nautical miles at data rates of 2 to 3 megabits per second and the probability of bit error rates not exceeding 10-6. The paper presents the major communication channel elements of a design for a lasercom system performing SDE roles. The design is established by comparing the advantages of the different approaches. The final design selection is based on the transmitter characteristics required for each system. The characteristics include physical properties, development risk, cost, as well as the flexibility for meeting more stringent system performance specifications without requiring major redesign.

  13. Laser imaging and computer-aided design and computer-aided manufacture in prosthetics and orthotics.

    PubMed

    Spaeth, John P

    2006-02-01

    Although Hanger Orthopedic Group, Inc., has been developing clinical protocols for its INSIGNIA scanner for more than 2 years, there are many applications that are currently in development and will be released over the next 2-year period after this publication. It is the goal of Hanger Orthopedic Group, Inc., to replace all plaster casting procedures with the laser scan and move toward a paperless environment where all images and documents are passed through its virtual network. INSIGNIA currently has five major production centers throughout the United States, which support more than 600 INSIGNIA certified clinicians. These clinicians staff more than 600 clinics in North America, all under the Hanger company name. The central fabrication service and the central design center processes hundreds of shapes per day (Fig. 27). So that any clinician in the field can use the expertise of the central designers and central fabricators to help with overflow or problems they might be having, the network that exists within Hanger is tied together and enhanced by INSIGNIA. Through virtual modification and centralization of these services, each patient receives the virtual collaboration of several clinicians with a total of years of experience. INSIGNIA has enhanced the patient experience. The enhancement is not only in removing the plaster from the process, but also in exposing each patient to the team of prosthetic experts working collaboratively behind the scenes. The rehabilitation industry continues to be bombarded with compliance paperwork and justifications. The INSIGNIA scan and resulting measurement reports give inherent strength to justifications based on volume change, surgical revisions, or tissue change. The files are kept in a data warehouse where they are vaulted and preserved presumably forever. Also, any of the shape graphics or measurement instruments can be printed into a discrete report that can become part of the patient's permanent record. Many physicians

  14. Accuracy of different types of computer-aided design/computer-aided manufacturing surgical guides for dental implant placement

    PubMed Central

    Geng, Wei; Liu, Changying; Su, Yucheng; Li, Jun; Zhou, Yanmin

    2015-01-01

    Purpose: To evaluate the clinical outcomes of implants placed using different types of computer-aided design/computer-aided manufacturing (CAD/CAM) surgical guides, including partially guided and totally guided templates, and determine the accuracy of these guides Materials and methods: In total, 111 implants were placed in 24 patients using CAD/CAM surgical guides. After implant insertion, the positions and angulations of the placed implants relative to those of the planned ones were determined using special software that matched pre- and postoperative computed tomography (CT) images, and deviations were calculated and compared between the different guides and templates. Results: The mean angular deviations were 1.72 ± 1.67 and 2.71 ± 2.58, the mean deviations in position at the neck were 0.27 ± 0.24 and 0.69 ± 0.66 mm, the mean deviations in position at the apex were 0.37 ± 0.35 and 0.94 ± 0.75 mm, and the mean depth deviations were 0.32 ± 0.32 and 0.51 ± 0.48 mm with tooth- and mucosa-supported stereolithographic guides, respectively (P < .05 for all). The mean distance deviations when partially guided (29 implants) and totally guided templates (30 implants) were used were 0.54 ± 0.50 mm and 0.89 ± 0.78 mm, respectively, at the neck and 1.10 ± 0.85 mm and 0.81 ± 0.64 mm, respectively, at the apex, with corresponding mean angular deviations of 2.56 ± 2.23° and 2.90 ± 3.0° (P > .05 for all). Conclusions: Tooth-supported surgical guides may be more accurate than mucosa-supported guides, while both partially and totally guided templates can simplify surgery and aid in optimal implant placement. PMID:26309497

  15. Armchair Survey Sampling: An Aid in Teaching Survey Design.

    ERIC Educational Resources Information Center

    Thompson, M. E.

    A fictitious community of 583 households was set up to simulate a survey population, and was used in two laboratory assignments where students "interviewed" householders by a quota sampling procedure and tested the performance of several probability sampling designs. (Author/JEG)

  16. An Information-Centric Framework for Designing Patient-Centered Medical Decision Aids and Risk Communication

    PubMed Central

    Franklin, Lyndsey; Plaisant, Catherine; Shneiderman, Ben

    2013-01-01

    Risk communication is a major challenge in productive patient-physician communication. Patient decision making responsibilities come with an implicit assumption that patients are sufficiently educated and confident in their abilities to make decisions about their care based on evidence based treatment recommendations. Attempts to improve health literacy in patients by way of graphical decision aids have met with success. Such decision aids typically have been designed for a general population and evaluated based on whether or not users of the decision aid can accurately report the data points in isolation. To classify decision aids, we present an information-centric framework for assessing the content delivered to patients. We provide examples of our framework from a literature survey and suggest ways improvements can be made by considering all dimensions of our framework. PMID:24551350

  17. Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

    PubMed

    Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

    2014-12-01

    This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p < 0.001). Significant differences in mean costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p < 0.001). Significant differences were also obtained between the costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit.

  18. Accelerating Science Driven System Design With RAMP

    SciTech Connect

    Wawrzynek, John

    2015-05-01

    Researchers from UC Berkeley, in collaboration with the Lawrence Berkeley National Lab, are engaged in developing an Infrastructure for Synthesis with Integrated Simulation (ISIS). The ISIS Project was a cooperative effort for “application-driven hardware design” that engages application scientists in the early parts of the hardware design process for future generation supercomputing systems. This project served to foster development of computing systems that are better tuned to the application requirements of demanding scientific applications and result in more cost-effective and efficient HPC system designs. In order to overcome long conventional design-cycle times, we leveraged reconfigurable devices to aid in the design of high-efficiency systems, including conventional multi- and many-core systems. The resulting system emulation/prototyping environment, in conjunction with the appropriate intermediate abstractions, provided both a convenient user programming experience and retained flexibility, and thus efficiency, of a reconfigurable platform. We initially targeted the Berkeley RAMP system (Research Accelerator for Multiple Processors) as that hardware emulation environment to facilitate and ultimately accelerate the iterative process of science-driven system design. Our goal was to develop and demonstrate a design methodology for domain-optimized computer system architectures. The tangible outcome is a methodology and tools for rapid prototyping and design-space exploration, leading to highly optimized and efficient HPC systems.

  19. Computer-aided design of aptamers for cytochrome p450.

    PubMed

    Shcherbinin, Dmitrii S; Gnedenko, Oksana V; Khmeleva, Svetlana A; Usanov, Sergey A; Gilep, Andrei A; Yantsevich, Aliaksei V; Shkel, Tatsiana V; Yushkevich, Ivan V; Radko, Sergey P; Ivanov, Alexis S; Veselovsky, Alexander V; Archakov, Alexander I

    2015-08-01

    Aptamers are short single-stranded DNA or RNA oligonucleotides that can bind to their targets with high affinity and specificity. Usually, they are experimentally selected using the SELEX method. Here, we describe an approach toward the in silico selection of aptamers for proteins. This approach involves three steps: finding a potential binding site, designing the recognition and structural parts of the aptamers and evaluating the experimental affinity. Using this approach, a set of 15-mer aptamers for cytochrome P450 51A1 was designed using docking and molecular dynamics simulation. An experimental evaluation of the synthesized aptamers using SPR biosensor showed that these aptamers interact with cytochrome P450 51A1 with Kd values in the range of 10(-6)-10(-7) M. PMID:26166326

  20. Computer-aided design of millimeter-wave E-plane filters

    NASA Astrophysics Data System (ADS)

    Shih, Y.-C.; Itoh, T.; Bui, L. Q.

    1983-02-01

    A computer-aided design (CAD) algorithm has been developed for a class of E-plane bandpass filters. The analysis portion of the algorithm is based on the residue-calculus technique and a generalized scattering parameter method. It is mathematically exact and numerically very efficient. Filters designed with this method have been fabricated and tested in Ka-band. Good agreement with design has been obtained.

  1. A methodology and a tool for the computer aided design with constraints of electrical devices

    SciTech Connect

    Wurtz, F.; Bigeon, J.; Poirson, C.

    1996-05-01

    A methodology for the computer aided constrained design of electrical devices is presented and validated through the design of a slotless permanent structure. It is based on the use of the analytical design equations of the device. Symbolic calculation is widely used to generate an analysis program and a sensitivity computation program. Those programs are linked with an optimization algorithm that can take constraints into account. The methodology is tested with an experimental software named PASCOSMA.

  2. Computer-aided industrial process design. The ASPEN project

    NASA Astrophysics Data System (ADS)

    1982-02-01

    The ASPEN Project was carried out at the Massachusetts Institute of Technology from 1976-1981. This report formally documents the work completed under the main contract between MIT and the US Department of Energy (Contract No. E(49-18)-2295 Task No. 9). In addition to the main contract, there were related contracts between MIT and the US Department of Energy on which work was reported separately. The project deliverables consisted of the source code and test problems for the ASPEN system on computer tape and a final report. The User Manual (1348 pages), the System Administrator Manual (1170 pages), and the Technical Reference Manual (1026 pages), and On-Line Documentation (Computer-Generated Tables) on magnetic tape were deliverables on a related, but separate contract. The source code versions of the system itself were provided, with installation instructions, for four different computers and operating system (IBM/OS, IBM/CMS, DEC/VAX, and Univac.

  3. Investigation into the development of computer aided design software for space based sensors

    NASA Technical Reports Server (NTRS)

    Pender, C. W.; Clark, W. L.

    1987-01-01

    The described effort is phase one of the development of a Computer Aided Design (CAD) software to be used to perform radiometric sensor design. The software package will be referred to as SCAD and is directed toward the preliminary phase of the design of space based sensor system. The approach being followed is to develop a modern, graphic intensive, user friendly software package using existing software as building blocks. The emphasis will be directed toward the development of a shell containing menus, smart defaults, and interfaces, which can accommodate a wide variety of existing application software packages. The shell will offer expected utilities such as graphics, tailored menus, and a variety of drivers for I/O devices. Following the development of the shell, the development of SCAD is planned as chiefly selection and integration of appropriate building blocks. The phase one development activities have included: the selection of hardware which will be used with SCAD; the determination of the scope of SCAD; the preliminary evaluation of a number of software packages for applicability to SCAD; determination of a method for achieving required capabilities where voids exist; and then establishing a strategy for binding the software modules into an easy to use tool kit.

  4. Effects of Computer-Aided Personalized System of Instruction in Developing Knowledge and Critical Thinking in Blended Learning Courses

    ERIC Educational Resources Information Center

    Svenningsen, Louis; Pear, Joseph J.

    2011-01-01

    Two experiments were conducted to assess an online version of Keller's personalized system of instruction, called computer-aided personalized system of instruction (CAPSI), as part of a blended learning design with regard to course knowledge and critical thinking development. In Experiment 1, two lecture sections of an introduction to University…

  5. Computer AIDS for Clinical Research Management and Control: General Analysis and Design

    PubMed Central

    Willard, Christopher G.; Gatewood, Laël C.; Ellis, Lynda B. M.

    1979-01-01

    Clinical research projects involve concurrent management of subjects, protocol, analysis and study. This complicated management problem could be aided by the use of computerized data systems. For most effective aid, such a system should consider all aspects of clinical research. We have analyzed clinical research tasks involving data collection, communication, and management and have used this task analysis to develop a system model for clinical research data management and control. The model deals with data control, study monitoring, user interfaces, report and analysis libraries, and study subject and support data bases. It may be used as a basis for computerized data system study and development. The model also indicates that the role of computerized systems in clinical research could be expanded into such areas as automatic report generation and control, process control aids, quality assurance monitoring, and study documentation.

  6. Preliminary design of a future integrated design system

    NASA Technical Reports Server (NTRS)

    Diggins, R. M.

    1980-01-01

    IPAD is a system of computer programs and data supporting the aerospace-vehicle design process by providing a set of services to aid in the management of a design project, project technical work, and project support work. Its purpose is to integrate people, programs, and data into a unified aerospace-vehicle design system. All project-management and technical data, together with certain standard data, are stored in a data base. The IPAD functions allow project personnel to query the data base and to perform operations on the data. This permits the orderly sequencing of the task elements of a complex operation and provides common access to a single data base by various participating groups who otherwise would require many separate files. These capabilities will be provided on a single host computer or across multiple heterogeneous computers on a distributed progress basis.

  7. Computer-aided design drafting/manufacturing (CADD/M) facility preparation

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Computer-Aided Design, Drafting and Manufacturing (CADD/M) equipment requires careful facilities preparation before installation takes place. This paper presents what a company should consider to ensure a proper installation. This includes consideration of working conditions. To get the most out of the system, the operators must be provided with a relaxed, comfortable environment, free from noise and other distractions. Such things as temperature requirements, lighting, power, security and fire protection are discussed. Also, future expansion needs are considered so that major construction will not be required for future years. Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This will lead to considerable cost savings, and in the long run, improve the scheduling for an entire project, from initial design to final production. This careful preparation will minimize unplanned events and problem areas. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  8. DeMAID/GA an Enhanced Design Manager's Aid for Intelligent Decomposition

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial public release of DeMAID in 1989, much research has been done in the areas of decomposition, concurrent engineering, parallel processing, and process management; many new tools and techniques have emerged. Based on these recent research and development efforts, numerous enhancements have been added to DeMAID to further aid the design manager in saving both cost and time in a design cycle. The key enhancement, a genetic algorithm (GA), will be available in the next public release called DeMAID/GA. The GA sequences the design processes to minimize the cost and time in converging a solution. The major enhancements in the upgrade of DeMAID to DeMAID/GA are discussed in this paper. A sample conceptual design project is used to show how these enhancements can be applied to improve the design cycle.

  9. Traffic Network Aided Plan and Road Line Optimization in Intelligent Traffic System

    NASA Astrophysics Data System (ADS)

    Liu, Bin; Qin, Guofeng

    2008-11-01

    In ITS(intelligent traffic system), traffic network plan is important. Public traffic network is a basic part in contemporary intelligent traffic and a basis of the municipal infrastructure construction. To construct the public traffic network aided plan, two problems are studied. One is how to plan traffic road line in order to cover the traffic districts; the other is how to choice the best way from the start point to the end. For the first one, a traffic road line aided plan algorithm is taken forward. The other is a road line optimization algorithm. It utilizes the topology theory to analyze the spatial character in public traffic network, and designs the best choice method to meet the user's requirements. The two algorithms are realized, and proved by a case in the graphical interface of GIS(Geographic Information System), including simulation for rationalization of the public traffic network.

  10. Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

    PubMed

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2011-12-01

    A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content.

  11. Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

    PubMed

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2011-12-01

    A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content. PMID:22389434

  12. The Brain in AIDS: Central Nervous System HIV-1 Infection and AIDS Dementia Complex.

    ERIC Educational Resources Information Center

    Price, Richard W.; And Others

    1988-01-01

    Discusses the complicated infection of human immunodeficiency virus type 1 (HIV-1) in its late stages of the acquired immune deficiency syndrome (AIDS) dementia complex. Explains the syndrome's development of abnormalities in cognition, motor performance, and behavior. (TW)

  13. Design of an aid to visual inspection workstation

    NASA Astrophysics Data System (ADS)

    Tait, Robert; Harding, Kevin

    2016-05-01

    Visual Inspection is the most common means for inspecting manufactured parts for random defects such as pits, scratches, breaks, corrosion or general wear. The reason for the need for visual inspection is the very random nature of what might be a defect. Some defects may be very rare, being seen once or twice a year, but May still be critical to part performance. Because of this random and rare nature, even the most sophisticated image analysis programs have not been able to recognize all possible defects. Key to any future automation of inspection is obtaining good sample images of what might be a defect. However, most visual check take no images and consequently generate no digital data or historical record beyond a simple count. Any additional tool to captures such images must be able to do so without taking addition time. This paper outlines the design of a potential visual inspection station that would be compatible with current visual inspection methods, but afford the means for reliable digital imaging and in many cases augmented capabilities to assist the inspection. Considerations in this study included: resolution, depth of field, feature highlighting, and ease of digital capture, annotations and inspection augmentation for repeatable registration as well as operator assistance and training.

  14. Simulation tools for computer-aided design and numerical investigations of high-power gyrotrons

    NASA Astrophysics Data System (ADS)

    Damyanova, M.; Balabanova, E.; Kern, S.; Illy, S.; Sabchevski, S.; Thumm, M.; Vasileva, E.; Zhelyazkov, I.

    2012-03-01

    Modelling and simulation are essential tools for computer-aided design (CAD), analysis and optimization of high-power gyrotrons used as radiation sources for electron cyclotron resonance heating (ECRH) and current drive (ECCD) of magnetically confined plasmas in the thermonuclear reactor ITER. In this communication, we present the current status of our simulation tools and discuss their further development.

  15. Web-Based Learning in the Computer-Aided Design Curriculum.

    ERIC Educational Resources Information Center

    Sung, Wen-Tsai; Ou, S. C.

    2002-01-01

    Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

  16. The Design, Implementation, and Formative Evaluation of a Classroom Aide Professional Development Training Program

    ERIC Educational Resources Information Center

    Dulfer, Katherine J.

    2013-01-01

    This dissertation focused on the process of designing, implementing, and formatively evaluating an eight week Classroom Aide Professional Development Training Program (CAPD-TP) on behavior management and academic instruction within the context of a New Jersey state approved private special education school for students with behavioral and/or…

  17. Therapist-Aided Exposure for Women with Lifelong Vaginismus: A Replicated Single-Case Design

    ERIC Educational Resources Information Center

    ter Kuile, Moniek M.; Bulte, Isis; Weijenborg, Philomeen T. M.; Beekman, Aart; Melles, Reinhilde; Onghena, Patrick

    2009-01-01

    Vaginismus is commonly described as a persistent difficulty in allowing vaginal entry of a penis or other object. Lifelong vaginismus occurs when a woman has never been able to have intercourse. A replicated single-case A-B-phase design was used to investigate the effectiveness of therapist-aided exposure for lifelong vaginismus. A baseline period…

  18. National Science Foundation 1989 Engineering Senior Design Projects To Aid the Disabled.

    ERIC Educational Resources Information Center

    Enderle, John D., Ed.

    Through the Bioengineering and Research to Aid the Disabled program of the National Science Foundation, design projects were awarded competitively to 16 universities. Senior engineering students at each of the universities constructed custom devices and software for disabled individuals. This compendium contains a description of each project in…

  19. Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

    ERIC Educational Resources Information Center

    Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

    2009-01-01

    Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

  20. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the Office of Student Financial Aid (OSFA) quality improvement program are described. The background and context for the Pell Grant quality control (QC) design study and the meaning of QC are reviewed. The general approach to quality improvement consists of the following elements: a strategic approach that enables OSFA…

  1. Computer-Aided Diagnostic System For Mass Survey Chest Images

    NASA Astrophysics Data System (ADS)

    Yasuda, Yoshizumi; Kinoshita, Yasuhiro; Emori, Yasufumi; Yoshimura, Hitoshi

    1988-06-01

    In order to support screening of chest radiographs on mass survey, a computer-aided diagnostic system that automatically detects abnormality of candidate images using a digital image analysis technique has been developed. Extracting boundary lines of lung fields and examining their shapes allowed various kind of abnormalities to be detected. Correction and expansion were facilitated by describing the system control, image analysis control and judgement of abnormality in the rule type programing language. In the experiments using typical samples of student's radiograms, good results were obtained for the detection of abnormal shape of lung field, cardiac hypertrophy and scoliosis. As for the detection of diaphragmatic abnormality, relatively good results were obtained but further improvements will be necessary.

  2. Complexity aided design. The FuturICT technological innovation paradigm

    NASA Astrophysics Data System (ADS)

    Carbone, A.; Ajmone-Marsan, M.; Axhausen, K. W.; Batty, M.; Masera, M.; Rome, E.

    2012-11-01

    "In the next century, planet earth will don an electronic skin. It will use the Internet as a scaffold to support and transmit its sensations. This skin is already being stitched together. It consists of millions of embedded electronic measuring devices: thermostats, pressure gauges, pollution detectors, cameras, microphones, glucose sensors, EKGs, electroencephalographs. These will probe and monitor cities and endangered species, the atmosphere, our ships, highways and fleets of trucks, our conversations, our bodies-even our dreams ....What will the earth's new skin permit us to feel? How will we use its surges of sensation? For several years-maybe for a decade-there will be no central nervous system to manage this vast signaling network. Certainly there will be no central intelligence...some qualities of self-awareness will emerge once the Net is sensually enhanced. Sensuality is only one force pushing the Net toward intelligence". These statements are quoted by an interview by Cherry Murray, Dean of the Harvard School of Engineering and Applied Sciences and Professor of Physics. It is interesting to outline the timeliness and highly predicting power of these statements. In particular, we would like to point to the relevance of the question "What will the earth's new skin permit us to feel?" to the work we are going to discuss in this paper. There are many additional compelling questions, as for example: "How can the electronic earth's skin be made more resilient?"; "How can the earth's electronic skin be improved to better satisfy the need of our society?";"What can the science of complex systems contribute to this endeavour?"

  3. Low-floor bus design preferences of walking aid users during simulated boarding and alighting.

    PubMed

    D'souza, Clive; Paquet, Victor; Lenker, James; Steinfeld, Edward; Bareria, Piyush

    2012-01-01

    Low-floor buses represent a significant improvement in accessible public transit for passengers with limited mobility. However, there is still a need for research on the inclusive design of transit buses to identify specific low-floor bus design conditions that are either particularly accommodating or challenging for passengers with functional and mobility impairments. These include doorway locations, seating configuration and the large front wheel-well covers that collectively impact boarding, alighting and interior movement of passengers. Findings from a laboratory study using a static full-scale simulation of a lowfloor bus to evaluate the impact of seating configuration and crowding on interior movement and accessibility for individuals with and without walking aids are presented (n=41). Simulated bus journeys that included boarding, fare payment, seating, and alighting were performed. Results from video observations and subjective assessments showed differences in boarding and alighting performance and users' perceptions of task difficulty. The need for assistive design features (e.g. handholds, stanchions), legroom and stowage space for walking aids was evident. These results demonstrate that specific design conditions in low-floor buses can significantly impact design preference among those who use walking aids. Consideration of ergonomics and inclusive design can therefore be used to improve the design of low-floor buses.

  4. 76 FR 15311 - Legacy Learning Systems, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-21

    ... Legacy Learning Systems, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal... methods of competition. The attached Analysis to Aid Public Comment describes both the allegations in the... period of thirty (30) days. The following Analysis to Aid Public Comment describes the terms of...

  5. Payload installation and deployment aid for space shuttle orbiter spacecraft remote manipulator system

    NASA Technical Reports Server (NTRS)

    Ross, T. O.

    1982-01-01

    An aid concept known as the PIDA (Payload Installation and Deployment Aid) is presented as a way to assist the Remote Manipulator System (RMS) by relaxing the accuracy required during payload handling in the payload bay. The aid concept was designed and developed to move payloads through a prescribed path between the confined quarters of the payload bay and a position outside the critical maneuvering area of the Orbiter. An androgynous docking mechanism is used at the payload/PIDA interfaces for normal docking functions that also serves as the structural connection between the payload and the Orbiter, that is capable of being loosened to prevent transfer of loads between a stowed payload and the PIDA structure. A gearmotor driven drum/cable system is used in the docking mechanism in a unique manner to center the attenuator assembly, align the ring and guide assembly (docking interface) in roll, pitch, and yaw, and rigidize the mechanism at a nominal position. A description of the design requirements and the modes of operation of the various functions of the deployment and the docking mechanisms are covered.

  6. Macromolecular Assemblage in the Design of a Synthetic AIDS Vaccine

    NASA Astrophysics Data System (ADS)

    Defoort, Jean-Philippe; Nardelli, Bernardetta; Huang, Wolin; Ho, David D.; Tam, James P.

    1992-05-01

    We describe a peptide vaccine model based on the mimicry of surface coat protein of a pathogen. This model used a macromolecular assemblage approach to amplify peptide antigens in liposomes or micelles. The key components of the model consisted of an oligomeric lysine scaffolding to amplify peptide antigens covalently 4-fold and a lipophilic membrane-anchoring group to further amplify noncovalently the antigens many-fold in liposomal or micellar form. A peptide antigen derived from the third variable domain of glycoprotein gp120 of human immunodeficiency virus type 1 (HIV-1), consisting of neutralizing, T-helper, and T-cytotoxic epitopes, was used in a macromolecular assemblage model (HIV-1 linear peptide amino acid sequence 308-331 in a tetravalent multiple antigen peptide system linked to tripalmitoyl-S-glycerylcysteine). The latter complex, in liposome or micelle, was used to immunize mice and guinea pigs without any adjuvant and found to induce gp120-specific antibodies that neutralize virus infectivity in vitro, elicit cytokine production, and prime CD8^+ cytotoxic T lymphocytes in vivo. Our results show that the macromolecular assemblage approach bears immunological mimicry of the gp120 of HIV virus and may lead to useful vaccines against HIV infection.

  7. Computer-Aided Drug Design of Bioactive Natural Products.

    PubMed

    Prachayasittikul, Veda; Worachartcheewan, Apilak; Shoombuatong, Watshara; Songtawee, Napat; Simeon, Saw; Prachayasittikul, Virapong; Nantasenamat, Chanin

    2015-01-01

    Natural products have been an integral part of sustaining civilizations because of their medicinal properties. Past discoveries of bioactive natural products have relied on serendipity, and these compounds serve as inspiration for the generation of analogs with desired physicochemical properties. Bioactive natural products with therapeutic potential are abundantly available in nature and some of them are beyond exploration by conventional methods. The effectiveness of computational approaches as versatile tools for facilitating drug discovery and development has been recognized for decades, without exception, in the case of natural products. In the post-genomic era, scientists are bombarded with data produced by advanced technologies. Thus, rendering these data into knowledge that is interpretable and meaningful becomes an essential issue. In this regard, computational approaches utilize the existing data to generate knowledge that provides valuable understanding for addressing current problems and guiding the further research and development of new natural-derived drugs. Furthermore, several medicinal plants have been continuously used in many traditional medicine systems since antiquity throughout the world, and their mechanisms have not yet been elucidated. Therefore, the utilization of computational approaches and advanced synthetic techniques would yield great benefit to improving the world's health population and well-being. PMID:25961523

  8. Computer-Aided Drug Design of Bioactive Natural Products.

    PubMed

    Prachayasittikul, Veda; Worachartcheewan, Apilak; Shoombuatong, Watshara; Songtawee, Napat; Simeon, Saw; Prachayasittikul, Virapong; Nantasenamat, Chanin

    2015-01-01

    Natural products have been an integral part of sustaining civilizations because of their medicinal properties. Past discoveries of bioactive natural products have relied on serendipity, and these compounds serve as inspiration for the generation of analogs with desired physicochemical properties. Bioactive natural products with therapeutic potential are abundantly available in nature and some of them are beyond exploration by conventional methods. The effectiveness of computational approaches as versatile tools for facilitating drug discovery and development has been recognized for decades, without exception, in the case of natural products. In the post-genomic era, scientists are bombarded with data produced by advanced technologies. Thus, rendering these data into knowledge that is interpretable and meaningful becomes an essential issue. In this regard, computational approaches utilize the existing data to generate knowledge that provides valuable understanding for addressing current problems and guiding the further research and development of new natural-derived drugs. Furthermore, several medicinal plants have been continuously used in many traditional medicine systems since antiquity throughout the world, and their mechanisms have not yet been elucidated. Therefore, the utilization of computational approaches and advanced synthetic techniques would yield great benefit to improving the world's health population and well-being.

  9. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  10. Computer aided design of prosthetic sockets for below-knee amputees.

    PubMed

    Saunders, C G; Foort, J; Bannon, M; Lean, D; Panych, L

    1985-04-01

    A computer-aided sculpting system for use in prosthetics is described. The prosthetist's sculpting tools now consist of a computer, a graphics terminal, a mouse and an on-screen moveable cursor. Accompanied by the system software, these tools allow systematic modification of a primitive socket using techniques analogous to those used by a prosthetist working with rasps and plaster.

  11. SAMO (Sistema de Apoyo Mechanizado a la Operacion): An operational aids computer system

    SciTech Connect

    Stormer, T.D.; Laflor, E.V.

    1989-01-01

    SAMO (Sistema de Apoyo Mechanizado a la Operacion) is a sensor-driven, computer-based, graphic display system designed by Westinghouse to aid the A. N. Asco operations staff during all modes of plant operations, including emergencies. The SAMO system is being implemented in the A. N. Asco plant in two phases that coincide with consecutive refueling outages for each of two nuclear units at the Asco site. Phase 1 of the SAMO system implements the following functions: (1) emergency operational aids, (2) postaccident monitoring, (3) plant graphics display, (4) high-speed transient analysis recording, (5) historical data collection, storage, and retrieval, (6) sequence of events, and (7) posttrip review. During phase 2 of the SAMO project, the current plant computer will be removed and the functions now performed by the plant computer will be performed by the SAMO system. In addition, the following functions will be implemented: (1) normal and simple transients operational aid, (2) plant information graphics; and (3) real-time radiological off-site dose calculation.

  12. Advancing lighting and daylighting simulation: The transition from analysis to design aid tools

    SciTech Connect

    Hitchcock, R.J.

    1995-05-01

    This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

  13. Computer-aided roll pass design in rolling of airfoil shapes

    NASA Technical Reports Server (NTRS)

    Akgerman, N.; Lahoti, G. D.; Altan, T.

    1980-01-01

    This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

  14. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  15. A handheld computer-aided diagnosis system and simulated analysis

    NASA Astrophysics Data System (ADS)

    Su, Mingjian; Zhang, Xuejun; Liu, Brent; Su, Kening; Louie, Ryan

    2016-03-01

    This paper describes a Computer Aided Diagnosis (CAD) system based on cellphone and distributed cluster. One of the bottlenecks in building a CAD system for clinical practice is the storage and process of mass pathology samples freely among different devices, and normal pattern matching algorithm on large scale image set is very time consuming. Distributed computation on cluster has demonstrated the ability to relieve this bottleneck. We develop a system enabling the user to compare the mass image to a dataset with feature table by sending datasets to Generic Data Handler Module in Hadoop, where the pattern recognition is undertaken for the detection of skin diseases. A single and combination retrieval algorithm to data pipeline base on Map Reduce framework is used in our system in order to make optimal choice between recognition accuracy and system cost. The profile of lesion area is drawn by doctors manually on the screen, and then uploads this pattern to the server. In our evaluation experiment, an accuracy of 75% diagnosis hit rate is obtained by testing 100 patients with skin illness. Our system has the potential help in building a novel medical image dataset by collecting large amounts of gold standard during medical diagnosis. Once the project is online, the participants are free to join and eventually an abundant sample dataset will soon be gathered enough for learning. These results demonstrate our technology is very promising and expected to be used in clinical practice.

  16. Tritium glovebox stripper system seismic design evaluation

    SciTech Connect

    Grinnell, J. J.; Klein, J. E.

    2015-09-01

    The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological doses to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.

  17. Computer-aided alignment of off-axis three-mirror imaging spectrometer system

    NASA Astrophysics Data System (ADS)

    Gong, Dun; Wang, Hong; Tian, Tie-yin

    2013-08-01

    The space camera is one of the most advanced optical equipments in obtaining earth surface information from space. With the development of the optical design, manufacture and alignment technology, the performance of the optical camera is moving forward quickly. In spaceto- ground remote sensing field, the resolution of ground remote sensing images have become higher and higher. Off-axis three-mirror system becomes an advanced optical system structure of space camera at present , because of its merits of large field, long focal length, no obstruction, high modulated transfer function, wide spectrum, good image quality, small cubage and light weight, etc. As it is difficult to align and test, the alignment of off-axis three mirror system is timeconsuming, so it is important and necessary of studying the computer-aided alignment of the complex optical system. Aiming at cutting the time of alignment, Computer-aided alignment technology is applied to this system. According to relation between fringe Zernike coefficient and Seidel aberration, wavefront aberration in the exit pupil of optical system is instead with fringe Zernike coefficient. A series of Zernike coefficient expressing the incorrect parameters of system are obtained by using multi-fields ZYGO interferometer auto-collimating interference test, which are transformed into geometric aberrations as the corrected object. Incorrect parameters of the system are determined by sensitivity matrix resulted from optical design software. These incorrect parameters are defined to be variables; the Zernike coefficient are defined to be the optimized target in merit function. The system is optimized by applying optical design software to receive the incorrect parameters result. Consequently, the adjusted result is brought into the optical design software to verify the right selection of incorrect parameters. The practical experiments are also given, result with RMS value lower than 0.04λ is acquired by using this

  18. A Computer-Aided Detection System for Digital Chest Radiographs.

    PubMed

    Carrillo-de-Gea, Juan Manuel; García-Mateos, Ginés; Fernández-Alemán, José Luis; Hernández-Hernández, José Luis

    2016-01-01

    Computer-aided detection systems aim at the automatic detection of diseases using different medical imaging modalities. In this paper, a novel approach to detecting normality/pathology in digital chest radiographs is proposed. The problem tackled is complicated since it is not focused on particular diseases but anything that differs from what is considered as normality. First, the areas of interest of the chest are found using template matching on the images. Then, a texture descriptor called local binary patterns (LBP) is computed for those areas. After that, LBP histograms are applied in a classifier algorithm, which produces the final normality/pathology decision. Our experimental results show the feasibility of the proposal, with success rates above 87% in the best cases. Moreover, our technique is able to locate the possible areas of pathology in nonnormal radiographs. Strengths and limitations of the proposed approach are described in the Conclusions. PMID:27372536

  19. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  20. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMaid)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  1. Preliminary Quality Control System Design for the Pell Grant Program.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    A preliminary design for a quality control (QC) system for the Pell Grant Program is proposed, based on the needs of the Office of Student Financial Assistance (OSFA). The applicability of the general design for other student aid programs administered by OSFA is also considered. The following steps included in a strategic approach to QC system…

  2. Web-Based Computer-Aided Personalized System of Instruction

    ERIC Educational Resources Information Center

    Pear, Joseph J.; Schnerch, Gabriel J.; Silva, Kathleen M.; Svenningsen, Louis; Lambert, Jody

    2011-01-01

    In the last two decades, there has been a proliferation of Web-based course-management systems designed to facilitate postsecondary teaching (for example, WebCT, Blackboard, Desire2Learn, Moodle). In general, these systems provide analogs for delivering lectures, holding class discussions, giving quizzes and examinations (typically multiple…

  3. A method of computer aided design with self-generative models in NX Siemens environment

    NASA Astrophysics Data System (ADS)

    Grabowik, C.; Kalinowski, K.; Kempa, W.; Paprocka, I.

    2015-11-01

    Currently in CAD/CAE/CAM systems it is possible to create 3D design virtual models which are able to capture certain amount of knowledge. These models are especially useful in an automation of routine design tasks. These models are known as self-generative or auto generative and they can behave in an intelligent way. The main difference between the auto generative and fully parametric models consists in the auto generative models ability to self-organizing. In this case design model self-organizing means that aside from the possibility of making of automatic changes of model quantitative features these models possess knowledge how these changes should be made. Moreover they are able to change quality features according to specific knowledge. In spite of undoubted good points of self-generative models they are not so often used in design constructional process which is mainly caused by usually great complexity of these models. This complexity makes the process of self-generative time and labour consuming. It also needs a quite great investment outlays. The creation process of self-generative model consists of the three stages it is knowledge and information acquisition, model type selection and model implementation. In this paper methods of the computer aided design with self-generative models in NX Siemens CAD/CAE/CAM software are presented. There are the five methods of self-generative models preparation in NX with: parametric relations model, part families, GRIP language application, knowledge fusion and OPEN API mechanism. In the paper examples of each type of the self-generative model are presented. These methods make the constructional design process much faster. It is suggested to prepare this kind of self-generative models when there is a need of design variants creation. The conducted research on assessing the usefulness of elaborated models showed that they are highly recommended in case of routine tasks automation. But it is still difficult to distinguish

  4. Interactive systems design and synthesis of future spacecraft concepts

    NASA Technical Reports Server (NTRS)

    Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

    1984-01-01

    An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced spacecraft (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze and conduct parametric studies and modify Earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

  5. System design description cone penetrometer system

    SciTech Connect

    Seda, R.Y., Westinghouse Hanford

    1996-08-12

    The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

  6. A Computer-Aided Telephone System to Enable Five Persons with Alzheimer's Disease to Make Phone Calls Independently

    ERIC Educational Resources Information Center

    Perilli, Viviana; Lancioni, Giulio E.; Laporta, Dominga; Paparella, Adele; Caffo, Alessandro O.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Oliva, Doretta

    2013-01-01

    This study extended the assessment of a computer-aided telephone system to enable five patients with a diagnosis of Alzheimer's disease to make phone calls independently. The patients were divided into two groups and exposed to intervention according to a non-concurrent multiple baseline design across groups. All patients started with baseline in…

  7. The national- and international-wide prospects of future improvements of position location and time synchronization systems and aids

    NASA Technical Reports Server (NTRS)

    Gouzhva, Yuri G.; Balyasnikov, Boris N.; Korniyenko, Vladimir V.; Pushkina, Irina G.; Shebshayevich, Valentin S.; Denisov, Vladimir I.; Reutov, Alexander P.

    1990-01-01

    The concept being designed by the Leningrad Scientific Research Radio Technical Institute (LSRRI) of united positioning and timing service on the basis of the utilization of long-range and global radionavigation and common time systems and aids for different users is described. The estimate of its utilization on the national as well as on international scale is given.

  8. Two Adults with Multiple Disabilities Use a Computer-Aided Telephone System to Make Phone Calls Independently

    ERIC Educational Resources Information Center

    Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Oliva, Doretta; Alberti, Gloria; Lang, Russell

    2011-01-01

    This study extended the assessment of a newly developed computer-aided telephone system with two participants (adults) who presented with blindness or severe visual impairment and motor or motor and intellectual disabilities. For each participant, the study was carried out according to an ABAB design, in which the A represented baseline phases and…

  9. Computer-Aided Designed, 3-Dimensionally Printed Porous Tissue Bioscaffolds For Craniofacial Soft Tissue Reconstruction

    PubMed Central

    Zopf, David A.; Mitsak, Anna G.; Flanagan, Colleen L.; Wheeler, Matthew; Green, Glenn E.; Hollister, Scott J.

    2016-01-01

    Objectives To determine the potential of integrated image-based Computer Aided Design (CAD) and 3D printing approach to engineer scaffolds for head and neck cartilaginous reconstruction for auricular and nasal reconstruction. Study Design Proof of concept revealing novel methods for bioscaffold production with in vitro and in vivo animal data. Setting Multidisciplinary effort encompassing two academic institutions. Subjects and Methods DICOM CT images are segmented and utilized in image-based computer aided design to create porous, anatomic structures. Bioresorbable, polycaprolactone scaffolds with spherical and random porous architecture are produced using a laser-based 3D printing process. Subcutaneous in vivo implantation of auricular and nasal scaffolds was performed in a porcine model. Auricular scaffolds were seeded with chondrogenic growth factors in a hyaluronic acid/collagen hydrogel and cultured in vitro over 2 months duration. Results Auricular and nasal constructs with several microporous architectures were rapidly manufactured with high fidelity to human patient anatomy. Subcutaneous in vivo implantation of auricular and nasal scaffolds resulted in excellent appearance and complete soft tissue ingrowth. Histologic analysis of in vitro scaffolds demonstrated native appearing cartilaginous growth respecting the boundaries of the scaffold. Conclusions Integrated image-based computer-aided design (CAD) and 3D printing processes generated patient-specific nasal and auricular scaffolds that supported cartilage regeneration. PMID:25281749

  10. Aiding the environment: the Australian Development Agency's experience of implementing an environmental management system

    SciTech Connect

    Keen, Meg . E-mail: meg.keen@anu.edu.au; Sullivan, Marjorie

    2005-08-15

    Aid agencies, like commercial businesses, are increasingly concerned with incorporating sound environmental management into their operations. Different approaches are being used to integrate sustainability into development assistance to ensure that environmental impacts are assessed and managed. One approach being used by AusAID, the Australian aid agency, is to implement an environmental management system (EMS) across program and project areas. This paper examines how AusAID has adapted the EMS approach to suit aid agency operations, and some of the lessons from the Australian experience.

  11. Statistical design for microwave systems

    NASA Technical Reports Server (NTRS)

    Cooke, Roland; Purviance, John

    1991-01-01

    This paper presents an introduction to statistical system design. Basic ideas needed to understand statistical design and a method for implementing statistical design are presented. The nonlinear characteristics of the system amplifiers and mixers are accounted for in the given examples. The specification of group delay, signal-to-noise ratio and output power are considered in these statistical designs.

  12. Running the Application Course: The Student Financial Aid Delivery Systems.

    ERIC Educational Resources Information Center

    Eureka Project, Sacramento, CA.

    Financial aid for students is now a complex educational industry, with expenditures in California reaching $1,500,000,000 in 1987 (including loans, grants, and jobs). This has grown from under $10,000,000 in the 1950s. As it became more important to study the policies involved in student financial aid, The Eureka Project was created. This…

  13. Improving Aid Effectiveness or Transforming the Global Capitalist System

    ERIC Educational Resources Information Center

    Ginsburg, Mark

    2010-01-01

    In the introduction to his article, "Aid, Development, and Education," Klees (2010) poses the question, has the "hundreds of billions of dollars in international aid... loaned to [or otherwise targeted to "assist"] developing countries through bilateral and multilateral mechanisms... helped?" He then posits the question to be "too complicated to…

  14. CT image-based computer-aided system for orbital prosthesis rehabilitation.

    PubMed

    Li, Shuang; Xiao, Caiwen; Duan, Liuyao; Fang, Chunlong; Huang, Yuanliang; Wang, Lisheng

    2015-10-01

    In this paper, a computer-aided system for orbital prosthesis rehabilitation is introduced. With the system, a 3D model of the orbital prosthesis can be easily reconstructed from the CT image of a patient by referring to the normal eye of the patient, and the rehabilitation result by the model can be simulated before the surgery. This facilitates surgeons to design appropriate orbital prosthesis and improve rehabilitation esthetics. Based on the system, the preoperative surgery planning for orbital implant can also be made. This improves the reliability, safety and intuition of the rehabilitation surgery well. The system has been applied to clinical CT images of patients, and the experimental results show effectiveness and acceptability of the system in the clinic.

  15. Genalogical approaches to ethical implications of informational assimilative integrated discovery systems (AIDS) in business

    SciTech Connect

    Pharhizgar, K.D.; Lunce, S.E.

    1994-12-31

    Development of knowledge-based technological acquisition techniques and customers` information profiles are known as assimilative integrated discovery systems (AIDS) in modern organizations. These systems have access through processing to both deep and broad domains of information in modern societies. Through these systems organizations and individuals can predict future trend probabilities and events concerning their customers. AIDSs are new techniques which produce new information which informants can use without the help of the knowledge sources because of the existence of highly sophisticated computerized networks. This paper has analyzed the danger and side effects of misuse of information through the illegal, unethical and immoral access to the data-base in an integrated and assimilative information system as described above. Cognivistic mapping, pragmatistic informational design gathering, and holistic classifiable and distributive techniques are potentially abusive systems whose outputs can be easily misused by businesses when researching the firm`s customers.

  16. Computer-Aided Design/Manufacturing (CAD/M) for high-speed interconnect

    NASA Astrophysics Data System (ADS)

    Santoski, N. F.

    1981-10-01

    The objective of the Computer-Aided Design/Manufacturing (CAD/M) for High-Speed Interconnect Program study was to assess techniques for design, analysis and fabrication of interconnect structures between high-speed logic ICs that are clocked in the 200 MHz to 5 GHz range. Interconnect structure models were investigated and integrated with existing device models. Design rules for interconnects were developed in terms of parameters that can be installed in software that is used for the design, analysis and fabrication of circuits. To implement these design rules in future software development, algorithms and software development techniques were defined. Major emphasis was on Printed Wiring Board and hybrid level circuits as opposed to monolithic chips. Various packaging schemes were considered, including controlled impedance lines in the 50 to 200 ohms range where needed. The design rules developed are generic in nature, in that various architecture classes and device technologies were considered.

  17. Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing.

    PubMed

    Ow, Andrew; Tan, Winston; Pienkowski, Lukasz

    2016-09-01

    The use of virtual surgical planning and computer-aided design/computer-aided manufacturing has been reported to enhance the planning for the reconstruction of mandibular continuity defects. This case report illustrates the use of this technology in the fabrication of a custom-made titanium prosthesis to restore a segmental mandibular defect. The design specifications and sequence of the custom-made titanium prosthesis are discussed. Although successful in this case, there are limitations in its application and case selection is of vital importance. PMID:27516841

  18. Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing.

    PubMed

    Ow, Andrew; Tan, Winston; Pienkowski, Lukasz

    2016-09-01

    The use of virtual surgical planning and computer-aided design/computer-aided manufacturing has been reported to enhance the planning for the reconstruction of mandibular continuity defects. This case report illustrates the use of this technology in the fabrication of a custom-made titanium prosthesis to restore a segmental mandibular defect. The design specifications and sequence of the custom-made titanium prosthesis are discussed. Although successful in this case, there are limitations in its application and case selection is of vital importance.

  19. Vision-aided inertial navigation system for robotic mobile mapping

    NASA Astrophysics Data System (ADS)

    Bayoud, Fadi; Skaloud, Jan

    2008-04-01

    A mapping system by vision-aided inertial navigation was developed for areas where GNSS signals are unreachable. In this framework, a methodology on the integration of vision and inertial sensors is presented, analysed and tested. The system employs the method of “SLAM: Simultaneous Localisation And Mapping” where the only external input available to the system at the beginning of the mapping mission is a number of features with known coordinates. SLAM is a term used in the robotics community to describe the problem of mapping the environment and at the same time using this map to determine the location of the mapping device. Differing from the robotics approach, the presented development stems from the frameworks of photogrammetry and kinematic geodesy that are merged in two filters that run in parallel: the Least-Squares Adjustment (LSA) for features coordinates determination and the Kalman filter (KF) for navigation correction. To test this approach, a mapping system-prototype comprising two CCD cameras and one Inertial Measurement Unit (IMU) is introduced. Conceptually, the outputs of the LSA photogrammetric resection are used as the external measurements for the KF that corrects the inertial navigation. The filtered position and orientation are subsequently employed in the photogrammetric intersection to map the surrounding features that are used as control points for the resection in the next epoch. We confirm empirically the dependency of navigation performance on the quality of the images and the number of tracked features, as well as on the geometry of the stereo-pair. Due to its autonomous nature, the SLAM's performance is further affected by the quality of IMU initialisation and the a-priory assumptions on error distribution. Using the example of the presented system we show that centimetre accuracy can be achieved in both navigation and mapping when the image geometry is optimal.

  20. Tools to aid the specification and design of flight software, appendix B

    NASA Technical Reports Server (NTRS)

    Bristow, G.

    1980-01-01

    The tasks that are normally performed during the specification and architecture design stages of software development are identified. Ways that tools could perform, or aid the performance, of such tasks are also identified. Much of the verification and analysis that is suggested is currently rarely performed during these early stages, but it is believed that this analysis should be done as early as possible so as to detect errors as early as possible.

  1. Computer-aided design and drafting visualization of anatomical structure of the human eye and orbit

    NASA Astrophysics Data System (ADS)

    Parshall, Robert F.; Sadler, Lewis L.

    1991-04-01

    A generalized " anatomically standard" eyeball was geometrically modeled on a Computer-Aided Design and Drafting (CADD) workstation based on published conceptual norms of dimension radii of curvature alignments etc. An orbital environment for this model was concurrently prepared by serial section reconstruction of a cadaver specimen. Issues addressed include orienting unregistered sections the utility of interactive CADDsupported visual logic in interpretive decision making and the value of geometric models.

  2. Astrocyte scar formation aids central nervous system axon regeneration.

    PubMed

    Anderson, Mark A; Burda, Joshua E; Ren, Yilong; Ao, Yan; O'Shea, Timothy M; Kawaguchi, Riki; Coppola, Giovanni; Khakh, Baljit S; Deming, Timothy J; Sofroniew, Michael V

    2016-04-14

    Transected axons fail to regrow in the mature central nervous system. Astrocytic scars are widely regarded as causal in this failure. Here, using three genetically targeted loss-of-function manipulations in adult mice, we show that preventing astrocyte scar formation, attenuating scar-forming astrocytes, or ablating chronic astrocytic scars all failed to result in spontaneous regrowth of transected corticospinal, sensory or serotonergic axons through severe spinal cord injury (SCI) lesions. By contrast, sustained local delivery via hydrogel depots of required axon-specific growth factors not present in SCI lesions, plus growth-activating priming injuries, stimulated robust, laminin-dependent sensory axon regrowth past scar-forming astrocytes and inhibitory molecules in SCI lesions. Preventing astrocytic scar formation significantly reduced this stimulated axon regrowth. RNA sequencing revealed that astrocytes and non-astrocyte cells in SCI lesions express multiple axon-growth-supporting molecules. Our findings show that contrary to the prevailing dogma, astrocyte scar formation aids rather than prevents central nervous system axon regeneration. PMID:27027288

  3. CAMRAD - COMPUTER AIDED MATERIAL REVIEW AUTOMATED DISPOSITION SYSTEM

    NASA Technical Reports Server (NTRS)

    Hanna, T. L.

    1994-01-01

    The basic function of a manufacturer's production support engineering unit is to identify, document, and dispose of hardware that does not conform to drawing requirements. CAMRAD, a program designed for rapid input and retrieval of all data used in engineering-to-manufacturing support operations, aids the engineer by automating the material review disposition process. Before CAMRAD, material review record searches were manual. The time spent searching through old documents precluded the timely disposition of new material reviews. CAMRAD facilitates the research of material review histories and provides for the efficient processing of material review documents. Three SmartWare project files control the operation of CAMRAD. The project file CAMRAD initializes variables for the other project files and specifies the pathing of the CAMRAD program, database files, and document files. The project file DATARAD controls all data management functions. The database consists of individual files containing all records of specific hardware discrepancies for a given part number. There are four basic avenues for records searches: part serial number, feature, Material Review (MR) number, and non-conformance. WORDRAD is the project file which controls the management of document files created when processing a material review disposition. Given a material review report identifying a defective hardware item, the production support engineer can use CAMRAD to quickly search the database for any history of the same problem, find out how well the problem has been documented, and create appropriate documentation for this latest occurrence. CAMRAD is written in the Smart Programming Language and is designed to run on IBM PC compatibles with the SmartWare v. 3.1 software package available from Informix Software. CAMRAD was developed in 1987. SmartWare is a registered trademark of Informix Software, Inc. IBM PC is a registered trademark of International Business Machines Corporation.

  4. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  5. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    2008-04-01

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  6. Satellite-aided mobile radio concepts study: Concept definition of a satellite-aided mobile and personal radio communication system

    NASA Technical Reports Server (NTRS)

    Anderson, R. E.

    1979-01-01

    The satellite system requires the use of a large satellite antenna and spacecraft array power of about 12 kW or more depending on the operating frequency. Technology developments needed include large offset reflector multibeam antennas, satellite electrical power sybsystems providing greater than 12 kW of power, signal switching hardware, and linearized efficient solid state amplifiers for the satellite-aided mobile band. Presently there is no frequency assignment for this service, and it is recommended that an allocation be pursued. The satellite system appears to be within reasonable extrapolation of the state of the art. It is further recommended that the satellite-aided system spacecraft definition studies and supporting technology development be initiated.

  7. Design of the ILC Crab Cavity System

    SciTech Connect

    Adolphsen, C.; Beard, C.; Bellantoni, L.; Burt, G.; Carter, R.; Chase, B.; Church, M.; Dexter, A.; Dykes, M.; Edwards, H.; Goudket, P; Jenkins, R.; Jones, R.M.; Kalinin, A.; Khabiboulline, T.; Ko, K.; Latina, A.; Li, Z.; Ma, L.; McIntosh, P.; Ng, C.; /SLAC /Daresbury /Fermilab /Cockcroft Inst. Accel. Sci. Tech. /CERN

    2007-08-15

    The International Linear Collider (ILC) has a 14 mrad crossing angle in order to aid extraction of spent bunches. As a result of the bunch shape at the interaction point, this crossing angle at the collision causes a large luminosity loss which can be recovered by rotating the bunches prior to collision using a crab cavity. The ILC baseline crab cavity is a 9-cell superconducting dipole cavity operating at a frequency of 3.9 GHz. In this paper the design of the ILC crab cavity and its phase control system, as selected for the RDR in February 2007 is described in fuller detail.

  8. A Hypermedia Computer-Aided Parasitology Tutoring System.

    ERIC Educational Resources Information Center

    Theodoropoulos, Georgios; Loumos, Vassili

    A hypermedia tutoring system for teaching parasitology to college students was developed using an object oriented software development tool, Knowledge Pro. The program was designed to meet four objectives: knowledge incorporation, tutoring, indexing of key words for Boolean search, and random generation of quiz questions with instant scoring. The…

  9. Expert systems - New approaches to computer-aided engineering

    NASA Astrophysics Data System (ADS)

    Dym, C. L.

    This paper provides an overview of the burgeoning new field of expert (knowledge-based) systems. This survey is tutorial in nature, intended to convey the gestalt of such systems to engineers who are newly exposed to the field. The discussion includes definitions, basic concepts, expert system architecture, descriptions of some of the programming tools and environments with which knowledge-based systems can be built, and approaches to knowledge acquisition. Some currently extant expert systems are described en passant, including a few developed for engineering purposes. Comments follow on the engineering of knowledge, as both cultural and social processes. The paper closes with an assessment of the roles that expert systems can play in engineering analysis, design, planning, and education.

  10. Design model of computerized personal decision aid for youth: An expert review

    NASA Astrophysics Data System (ADS)

    Sarif, Siti Mahfuzah; Ibrahim, Norfiza; Shiratuddin, Norshuhada

    2016-08-01

    This paper provides a structured review of a design model of a computerized personal decision aid that is intended for youth, named as YouthPDA Design Model. The proposed design model was examined by experts in related areas to ensure the appropriateness of the proposed components and elements, relevancy of the terminologies used, logic of the flow, usability, and practicality of the design model towards development of YouthPDA application. Seven experts from related areas were involved in the evaluation. Discussions on the findings obtained from the expert review are included in this paper. Finally, a revised design model of YouthPDA is proposed as main guidance to develop YouthPDA application.

  11. Hearing loss and the central auditory system: Implications for hearing aids

    NASA Astrophysics Data System (ADS)

    Frisina, Robert D.

    2003-04-01

    Hearing loss can result from disorders or damage to the ear (peripheral auditory system) or the brain (central auditory system). Here, the basic structure and function of the central auditory system will be highlighted as relevant to cases of permanent hearing loss where assistive devices (hearing aids) are called for. The parts of the brain used for hearing are altered in two basic ways in instances of hearing loss: (1) Damage to the ear can reduce the number and nature of input channels that the brainstem receives from the ear, causing plasticity of the central auditory system. This plasticity may partially compensate for the peripheral loss, or add new abnormalities such as distorted speech processing or tinnitus. (2) In some situations, damage to the brain can occur independently of the ear, as may occur in cases of head trauma, tumors or aging. Implications of deficits to the central auditory system for speech perception in noise, hearing aid use and future innovative circuit designs will be provided to set the stage for subsequent presentations in this special educational session. [Work supported by NIA-NIH Grant P01 AG09524 and the International Center for Hearing & Speech Research, Rochester, NY.

  12. Eye-Tracking Measures Reveal How Changes in the Design of Aided AAC Displays Influence the Efficiency of Locating Symbols by School-Age Children without Disabilities

    ERIC Educational Resources Information Center

    Wilkinson, Krista M.; O'Neill, Tara; McIlvane, William J.

    2014-01-01

    Purpose: Many individuals with communication impairments use aided augmentative and alternative communication (AAC) systems involving letters, words, or line drawings that rely on the visual modality. It seems reasonable to suggest that display design should incorporate information about how users attend to and process visual information. The…

  13. Design and analysis tools for concurrent blackboard systems

    NASA Technical Reports Server (NTRS)

    Mcmanus, John W.

    1991-01-01

    A set of blackboard system design and analysis tools that consists of a knowledge source organizer, a knowledge source input/output connectivity analyzer, and a validated blackboard system simulation model is discussed. The author presents the structure and functionality of the knowledge source input/output connectivity analyzer. An example outlining the use of the analyzer to aid in the design of a concurrent tactical decision generator for air-to-air combat is presented. The blackboard system design and analysis tools were designed for generic blackboard systems and are application independent.

  14. Metalloporphyrin catalysts for oxygen reduction developed using computer-aided molecular design

    SciTech Connect

    Ryba, G.N.; Hobbs, J.D.; Shelnutt, J.A.

    1996-04-01

    The objective of this project is the development of a new class of metalloporphyrin materials used as catalsyts for use in fuel cell applications. The metalloporphyrins are excellent candidates for use as catalysts at both the anode and cathode. The catalysts reduce oxygen in 1 M potassium hydroxide, as well as in 2 M sulfuric acid. Covalent attachment to carbon supports is being investigated. The computer-aided molecular design is an iterative process, in which experimental results feed back into the design of future catalysts.

  15. Multiscale Mathematical Modeling in Dental Tissue Engineering: Toward Computer-Aided Design of a Regenerative System Based on Hydroxyapatite Granules, Focussing on Early and Mid-Term Stiffness Recovery

    PubMed Central

    Scheiner, Stefan; Komlev, Vladimir S.; Gurin, Alexey N.; Hellmich, Christian

    2016-01-01

    We here explore for the very first time how an advanced multiscale mathematical modeling approach may support the design of a provenly successful tissue engineering concept for mandibular bone. The latter employs double-porous, potentially cracked, single millimeter-sized granules packed into an overall conglomerate-type scaffold material, which is then gradually penetrated and partially replaced by newly grown bone tissue. During this process, the newly developing scaffold-bone compound needs to attain the stiffness of mandibular bone under normal physiological conditions. In this context, the question arises how the compound stiffness is driven by the key design parameters of the tissue engineering system: macroporosity, crack density, as well as scaffold resorption/bone formation rates. We here tackle this question by combining the latest state-of-the-art mathematical modeling techniques in the field of multiscale micromechanics, into an unprecedented suite of highly efficient, semi-analytically defined computation steps resolving several levels of hierarchical organization, from the millimeter- down to the nanometer-scale. This includes several types of homogenization schemes, namely such for porous polycrystals with elongated solid elements, for cracked matrix-inclusion composites, as well as for assemblies of coated spherical compounds. Together with the experimentally known stiffnesses of hydroxyapatite crystals and mandibular bone tissue, the new mathematical model suggests that early stiffness recovery (i.e., within several weeks) requires total avoidance of microcracks in the hydroxyapatite scaffolds, while mid-term stiffness recovery (i.e., within several months) is additionally promoted by provision of small granule sizes, in combination with high bone formation and low scaffold resorption rates. PMID:27708584

  16. NASA Space Engineering Research Center for VLSI systems design

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

  17. Design, Development, and Evaluation of Visual Aids for Communicating Prescription Drug Instructions to Nonliterate Patients in Rural Cameroon.

    ERIC Educational Resources Information Center

    Ngoh, Lucy N.; Shepherd, Marvin D.

    1997-01-01

    Culturally sensitive visual aids designed to help convey drug information to nonliterate female adults requiring antibiotics were developed. Researchers conceptualized the messages, and a local artist produced the visual aids. Comprehension and compliance with prescription instructions were evaluated (N=78). Results and practical implications are…

  18. Computer-aided design and manufacture of an above-knee amputee socket.

    PubMed

    Torres-Moreno, R; Saunders, C G; Foort, J; Morrison, J B

    1991-01-01

    This paper describes the initial test results obtained from a newly developed computer-aided socket design (CASD) and manufacturing (CASM) process for above-knee amputees. Anthropometric measures taken from an amputee provided input information to a CASD system. Using these measurements, data from a reference shape library stored in the computer were selected and modified to create a unique socket shape reflecting the particular characteristics of the amputation stump. The resultant shape was produced as a 'primitive' test socket by a CASM process. Numerical shape data were then transferred to a CNC milling machine to construct a negative cast, from which the primitive socket was produced by a vacuum-forming procedure. The resultant primitive socket shape was fitted and the amputee was able to load the socket without discomfort. Some shape discrepancies were identified and the shape data were modified interactively by the CASD system to create a final socket shape. The final socket shape was manufactured and worn by the amputee during a 35 min walking trial. Subjective evaluation was that the socket provided comfort and control comparable with that of the conventional socket, and proved to be acceptable to the amputee. This was followed by a 2-month home trial which was also successful. The CASD socket shapes were compared numerically in area, shape and volume with data taken from the original socket worn by the amputee, a new socket made by conventional methods and a topographic model of the amputation stump. The final CASD socket shape compared favourably with that of a socket manufactured by conventional methods.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2002669

  19. Designing Instructional Systems

    ERIC Educational Resources Information Center

    Furtado, Lorraine T.

    1974-01-01

    The author presents an instructional design model for teachers that evolves around a teacher-manager concept which recognizes management functions of: planning, organizing, leading, and controlling. (EA)

  20. Automated a complex computer aided design concept generated using macros programming

    NASA Astrophysics Data System (ADS)

    Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

    2013-12-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

  1. FirstAidAssistanceSystem (FAAS): improvement of first aid measures using Car2Car-communication technology

    NASA Astrophysics Data System (ADS)

    Tuchscheerer, Sven; Hoppe, Tobias; Krätzer, Christian; Dittmann, Jana

    2011-01-01

    This work's goal is the enhancement of first aid measures directly after car accidents by calling suited first aiders via Car-to-Car (C2C) communication and to assist them providing detailed multimedia support instructions. Our concept combines upcoming C2C communication technologies with established technology, in particular GPS and GSM. After a collision, the proposed FirstAidAssistanceSystem (FAAS) sends a broadcast message using C2C technology according to the IEEE 802.11p standard. All nearby cars (as potential first aiders) are located and at least one nearest candidate (we suggest 3-5) driving towards the accident scene is chosen and notified as first aider. A support guide on his multipurpose display (e.g. the navigation system) provides first aiders with detailed instructions and illustrative tutorials. The paper presents our concept in detail with a discussion of practical evaluation criteria and an introduction of a first test implementation.

  2. Assessment of optical localizer accuracy for computer aided surgery systems.

    PubMed

    Elfring, Robert; de la Fuente, Matías; Radermacher, Klaus

    2010-01-01

    The technology for localization of surgical tools with respect to the patient's reference coordinate system in three to six degrees of freedom is one of the key components in computer aided surgery. Several tracking methods are available, of which optical tracking is the most widespread in clinical use. Optical tracking technology has proven to be a reliable method for intra-operative position and orientation acquisition in many clinical applications; however, the accuracy of such localizers is still a topic of discussion. In this paper, the accuracy of three optical localizer systems, the NDI Polaris P4, the NDI Polaris Spectra (in active and passive mode) and the Stryker Navigation System II camera, is assessed and compared critically. Static tests revealed that only the Polaris P4 shows significant warm-up behavior, with a significant shift of accuracy being observed within 42 minutes of being switched on. Furthermore, the intrinsic localizer accuracy was determined for single markers as well as for tools using a volumetric measurement protocol on a coordinate measurement machine. To determine the relative distance error within the measurement volume, the Length Measurement Error (LME) was determined at 35 test lengths. As accuracy depends strongly on the marker configuration employed, the error to be expected in typical clinical setups was estimated in a simulation for different tool configurations. The two active localizer systems, the Stryker Navigation System II camera and the Polaris Spectra (active mode), showed the best results, with trueness values (mean +/- standard deviation) of 0.058 +/- 0.033 mm and 0.089 +/- 0.061 mm, respectively. The Polaris Spectra (passive mode) showed a trueness of 0.170 +/- 0.090 mm, and the Polaris P4 showed the lowest trueness at 0.272 +/- 0.394 mm with a higher number of outliers than for the other cameras. The simulation of the different tool configurations in a typical clinical setup revealed that the tracking error can

  3. Role of computer-aided drug design in modern drug discovery.

    PubMed

    Macalino, Stephani Joy Y; Gosu, Vijayakumar; Hong, Sunhye; Choi, Sun

    2015-09-01

    Drug discovery utilizes chemical biology and computational drug design approaches for the efficient identification and optimization of lead compounds. Chemical biology is mostly involved in the elucidation of the biological function of a target and the mechanism of action of a chemical modulator. On the other hand, computer-aided drug design makes use of the structural knowledge of either the target (structure-based) or known ligands with bioactivity (ligand-based) to facilitate the determination of promising candidate drugs. Various virtual screening techniques are now being used by both pharmaceutical companies and academic research groups to reduce the cost and time required for the discovery of a potent drug. Despite the rapid advances in these methods, continuous improvements are critical for future drug discovery tools. Advantages presented by structure-based and ligand-based drug design suggest that their complementary use, as well as their integration with experimental routines, has a powerful impact on rational drug design. In this article, we give an overview of the current computational drug design and their application in integrated rational drug development to aid in the progress of drug discovery research.

  4. New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

    PubMed

    Lee, M-Y; Chang, C-C; Ku, Y C

    2008-01-01

    Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

  5. New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

    PubMed

    Lee, M-Y; Chang, C-C; Ku, Y C

    2008-01-01

    Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century. PMID:18183523

  6. The servicing aid tool: A teleoperated robotics system for space applications

    NASA Technical Reports Server (NTRS)

    Dorman, Keith W.; Pullen, John L.; Keksz, William O.; Eismann, Paul H.; Kowalski, Keith A.; Karlen, James P.

    1994-01-01

    The Servicing Aid Tool (SAT) is a teleoperated, force-reflecting manipulation system designed for use on the Space Shuttle. The system will assist Extravehicular Activity (EVA) servicing of spacecraft such as the Hubble Space Telescope. The SAT stands out from other robotics development programs in that special attention was given to provide a low-cost, space-qualified design which can easily and inexpensively be reconfigured and/or enhanced through the addition of existing NASA funded technology as that technology matures. SAT components are spaceflight adaptations of existing ground-based designs from Robotics Research Corporation (RRC), the leading supplier of robotics systems to the NASA and university research community in the United States. Fairchild Space is the prime contractor and provides the control electronics, safety system, system integration, and qualification testing. The manipulator consists of a 6-DOF Slave Arm mounted on a 1-DOF Positioning Link in the shuttle payload bay. The Slave Arm is controlled via a highly similar, 6-DOF, force-reflecting Master Arm from Schilling Development, Inc. This work is being performed under contract to the Goddard Space Flight Center Code, Code 442, Hubble Space Telescope Flight Systems and Servicing Project.

  7. A novel AIDS/HIV intelligent medical consulting system based on expert systems

    PubMed Central

    Ebrahimi, Alireza Pour; Toloui Ashlaghi, Abbas; Mahdavy Rad, Maryam

    2013-01-01

    Background: The purpose of this paper is to propose a novel intelligent model for AIDS/HIV data based on expert system and using it for developing an intelligent medical consulting system for AIDS/HIV. Materials and Methods: In this descriptive research, 752 frequently asked questions (FAQs) about AIDS/HIV are gathered from numerous websites about this disease. To perform the data mining and extracting the intelligent model, the 6 stages of Crisp method has been completed for FAQs. The 6 stages include: Business understanding, data understanding, data preparation, modelling, evaluation and deployment. C5.0 Tree classification algorithm is used for modelling. Also, rational unified process (RUP) is used to develop the web-based medical consulting software. Stages of RUP are as follows: Inception, elaboration, construction and transition. The intelligent developed model has been used in the infrastructure of the software and based on client's inquiry and keywords related FAQs are displayed to the client, according to the rank. FAQs’ ranks are gradually determined considering clients reading it. Based on displayed FAQs, test and entertainment links are also displayed. Result: The accuracy of the AIDS/HIV intelligent web-based medical consulting system is estimated to be 78.76%. Conclusion: AIDS/HIV medical consulting systems have been developed using intelligent infrastructure. Being equipped with an intelligent model, providing consulting services on systematic textual data and providing side services based on client's activities causes the implemented system to be unique. The research has been approved by Iranian Ministry of Health and Medical Education for being practical. PMID:24251290

  8. Computer-aided design of high-contact-ratio gears for minimum dynamic load and stress

    NASA Technical Reports Server (NTRS)

    Lin, Hsiang Hsi; Lee, Chinwai; Oswald, Fred B.; Townsend, Dennis P.

    1990-01-01

    A computer aided design procedure is presented for minimizing dynamic effects on high contact ratio gears by modification of the tooth profile. Both linear and parabolic tooth profile modifications of high contact ratio gears under various loading conditions are examined and compared. The effects of the total amount of modification and the length of the modification zone were systematically studied at various loads and speeds to find the optimum profile design for minimizing the dynamic load and the tooth bending stress. Parabolic profile modification is preferred over linear profile modification for high contact ratio gears because of its lower sensitivity to manufacturing errors. For parabolic modification, a greater amount of modification at the tooth tip and a longer modification zone are required. Design charts are presented for high contact ratio gears with various profile modifications operating under a range of loads. A procedure is illustrated for using the charts to find the optimum profile design.

  9. DDL system: Design systhesis of digital systems

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1983-01-01

    Digital Systems Design Language was integrated into the CADAT system environment of NASA-MSFC. The major technical aspects of this integration are summarized. Automatic hardware synthesis is now possible starting with a high level description of the system to be synthesized. The DDL system provides a high level design verification capability, thereby minimizing design changes in the later stages of the design cycle. An overview of the DDL system covering the translation, simulation and synthesis capabilities is provided. Two companion documents (the user's and programmer's manuals) are to be consulted for detailed discussions.

  10. FNAL system patching design

    SciTech Connect

    Schmidt, Jack; Lilianstrom, Al; Romero, Andy; Dawson, Troy; Sieh, Connie; /Fermilab

    2004-01-01

    FNAL has over 5000 PCs running either Linux or Windows software. Protecting these systems efficiently against the latest vulnerabilities that arise has prompted FNAL to take a more central approach to patching systems. Due to different levels of existing support infrastructures, the patching solution for linux systems differs from that of windows systems. In either case, systems are checked for vulnerabilities by Computer Security using the Nessus tool.

  11. Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

    PubMed

    Ankyu, Shuhei; Nakamura, Keisuke; Harada, Akio; Hong, Guang; Kanno, Taro; Niwano, Yoshimi; Örtengren, Ulf; Egusa, Hiroshi

    2016-08-01

    Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance. PMID:27203408

  12. Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

    PubMed

    Ankyu, Shuhei; Nakamura, Keisuke; Harada, Akio; Hong, Guang; Kanno, Taro; Niwano, Yoshimi; Örtengren, Ulf; Egusa, Hiroshi

    2016-08-01

    Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance.

  13. Breaking the Glass Ceiling: Increasing the Meaningful Involvement of Women Living With HIV/AIDS (MIWA) in the Design and Delivery of HIV/AIDS Services.

    PubMed

    Carter, Allison; Greene, Saara; Nicholson, Valerie; O'Brien, Nadia; Sanchez, Margarite; de Pokomandy, Alexandra; Loutfy, Mona; Kaida, Angela

    2015-01-01

    The meaningful involvement of women living with HIV/AIDS (MIWA) is a key feature of women-centred HIV care, yet little is known about transforming MIWA from principle to practice. Drawing on focus group data from the Canadian HIV Women's Sexual and Reproductive Health Cohort Study (CHIWOS), we explored HIV-positive women's meaningful involvement in the design and delivery of HIV/AIDS services in British Columbia, Canada. In this article, we highlight the benefits and tensions that emerge as women traverse multiple roles as service users and service providers within their care communities, and the impact this has on their access to care and overall health.

  14. Manufacturing cost/design system: A CAD/CAM dialogue

    NASA Technical Reports Server (NTRS)

    Loshigian, H. H.; Rachowitz, B. I.; Judson, D.

    1980-01-01

    The development of the Manufacturing Cost/Design System (MC/DS) will provide the aerospace design engineer a tool with which to perform heretofore impractical design manufacturing cost tradeoffs. The Air Force Integrated Computer Aided Manufacturing (ICAM) Office has initiated the development and demonstration of an MC/DS which, when fully implemented, will integrate both design and manufacturing data bases to provide real time visibility into the manufacturing costs associated with various design options. The first release of a computerized system will be made before the end of 1981.

  15. Geologic considerations in underground coal mining system design

    NASA Technical Reports Server (NTRS)

    Camilli, F. A.; Maynard, D. P.; Mangolds, A.; Harris, J.

    1981-01-01

    Geologic characteristics of coal resources which may impact new extraction technologies are identified and described to aid system designers and planners in their task of designing advanced coal extraction systems for the central Appalachian region. These geologic conditions are then organized into a matrix identified as the baseline mine concept. A sample region, eastern Kentucy is analyzed using both the developed baseline mine concept and the traditional geologic investigative approach.

  16. Operator function modeling: Cognitive task analysis, modeling and intelligent aiding in supervisory control systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Christine M.

    1990-01-01

    The design, implementation, and empirical evaluation of task-analytic models and intelligent aids for operators in the control of complex dynamic systems, specifically aerospace systems, are studied. Three related activities are included: (1) the models of operator decision making in complex and predominantly automated space systems were used and developed; (2) the Operator Function Model (OFM) was used to represent operator activities; and (3) Operator Function Model Expert System (OFMspert), a stand-alone knowledge-based system was developed, that interacts with a human operator in a manner similar to a human assistant in the control of aerospace systems. OFMspert is an architecture for an operator's assistant that uses the OFM as its system and operator knowledge base and a blackboard paradigm of problem solving to dynamically generate expectations about upcoming operator activities and interpreting actual operator actions. An experiment validated the OFMspert's intent inferencing capability and showed that it inferred the intentions of operators in ways comparable to both a human expert and operators themselves. OFMspert was also augmented with control capabilities. An interface allowed the operator to interact with OFMspert, delegating as much or as little control responsibility as the operator chose. With its design based on the OFM, OFMspert's control capabilities were available at multiple levels of abstraction and allowed the operator a great deal of discretion over the amount and level of delegated control. An experiment showed that overall system performance was comparable for teams consisting of two human operators versus a human operator and OFMspert team.

  17. Multiobjective insensitive design of airplane control systems with uncertain parameters

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Giesy, D. P.

    1981-01-01

    A multiobjective computer-aided design algorithm has been developed which minimizes the sensitivity of the design objectives to uncertainties in system parameters. The more important uncertain parameters are described by a gaussian random vector with known covariance matrix, and a vector sensitivity objective function is defined as the probabilities that the design objectives will violate specified requirements constraints. Control system parameters are found which minimize the sensitivity vector in a Pareto-optimal sense, using constrained minimization algorithms. Example results are shown for lateral stability augmentation system (SAS) design for three Shuttle flight conditions.

  18. 77 FR 71600 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding Patient Experiences With Emergency Department Care AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Request for...

  19. Virtual Display Design and Evaluation of Clothing: A Design Process Support System

    ERIC Educational Resources Information Center

    Zhang, Xue-Fang; Huang, Ren-Qun

    2014-01-01

    This paper proposes a new computer-aided educational system for clothing visual merchandising and display. It aims to provide an operating environment that supports the various stages of display design in a user-friendly and intuitive manner. First, this paper provides a brief introduction to current software applications in the field of…

  20. Lithium-ion batteries for hearing aid applications: I. Design and performance

    NASA Astrophysics Data System (ADS)

    Passerini, S.; Owens, B. B.; Coustier, F.

    Rechargeable batteries have been designed for powering hearing aid devices (HAD). The cells, based on the lithium-ion chemistry, were designed in a size that is compatible with the existing HAD. The 10 mA h batteries were tested to characterize the design and the electrochemical performance from the point of view of a typical HAD application. Results are presented for constant-current tests, first-cycle conditions, charge voltage cut-off, rate performance, and cycle life. The pulse capabilities and the preliminary safety tests of the batteries will be presented in a following report. The results of the lithium-ion HAD cells developed in this project are compared with other battery chemistries: lithium-alloy and nickel-metal hydride secondary batteries and Zn-air primary batteries.

  1. History and evolution of the pharmacophore concept in computer-aided drug design.

    PubMed

    Güner, Osman F

    2002-12-01

    With computer-aided drug design established as an integral part of the lead discovery and optimization process, pharmacophores have become a focal point for conceptualizing and understanding receptor-ligand interactions. In the structure-based design process, pharmacophores can be used to align molecules based on the three-dimensional arrangement of chemical features or to develop predictive models (e.g., 3D-QSAR) that correlate with the experimental activities of a given training set. Pharmacophores can be also used as search queries for retrieving potential leads from structural databases, for designing molecules with specific desired attributes, or as fingerprints for assessing similarity and diversity of molecules. This review article presents a historical perspective on the evolution and use of the pharmacophore concept in the pharmaceutical, biotechnology, and fragrances industry with published examples of how the technology has contributed and advanced the field. PMID:12470283

  2. Toward the computer-aided design of metal ion sequestering agents

    SciTech Connect

    Hay, Benjamin P.; Firman, Timothy K.; Lumetta, Gregg J.; Rapko, Brian M.; Garza, Priscilla A.; Sinkov, Sergei I.; Hutchison, James E.; Parks, Bevin W.; Gilbertson, Robert D.; Weakley, Timothy J R

    2004-07-14

    The concepts embodied in de novo structure-based drug design are being adapted for the computer-aided design of metal ion sequestering agents. This adaptation requires the development of methods for (i) generating candidate structures and (ii) evaluating and prioritizing these structures with respect to their binding affinity for a specific guest. This article summarizes recent progress in this area that includes the creation of a new computer software program, called HostDesigner, that can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. Several methods for evaluating the degree of binding site organization in a host structure are presented. An example is provided to demonstrate how these methods have been used to identify ligand architectures that provide enhanced metal ion binding affinity.

  3. A Novel Paradigm for Computer-Aided Design: TRIZ-Based Hybridization of Topologically Optimized Density Distributions

    NASA Astrophysics Data System (ADS)

    Cardillo, A.; Cascini, G.; Frillici, F. S.; Rotini, F.

    In a recent project the authors have proposed the adoption of Optimization Systems [1] as a bridging element between Computer-Aided Innovation (CAI) and PLM to identify geometrical contradictions [2], a particular case of the TRIZ physical contradiction [3]. A further development of the research [4] has revealed that the solutions obtained from several topological optimizations can be considered as elementary customized modeling features for a specific design task. The topology overcoming the arising geometrical contradiction can be obtained through a manipulation of the density distributions constituting the conflicting pair. Already two strategies of density combination have been identified as capable to solve geometrical contradictions and several others are under extended testing. The paper illustrates the most recent results of the ongoing research mainly related to the extension of the algorithms from 2D to 3D design spaces. The whole approach is clarified by means of two detailed examples, where the proposed technique is compared with classical multi-goal optimization.

  4. Computer aided decision support system for cervical cancer classification

    NASA Astrophysics Data System (ADS)

    Rahmadwati, Rahmadwati; Naghdy, Golshah; Ros, Montserrat; Todd, Catherine

    2012-10-01

    Conventional analysis of a cervical histology image, such a pap smear or a biopsy sample, is performed by an expert pathologist manually. This involves inspecting the sample for cellular level abnormalities and determining the spread of the abnormalities. Cancer is graded based on the spread of the abnormal cells. This is a tedious, subjective and time-consuming process with considerable variations in diagnosis between the experts. This paper presents a computer aided decision support system (CADSS) tool to help the pathologists in their examination of the cervical cancer biopsies. The main aim of the proposed CADSS system is to identify abnormalities and quantify cancer grading in a systematic and repeatable manner. The paper proposes three different methods which presents and compares the results using 475 images of cervical biopsies which include normal, three stages of pre cancer, and malignant cases. This paper will explore various components of an effective CADSS; image acquisition, pre-processing, segmentation, feature extraction, classification, grading and disease identification. Cervical histological images are captured using a digital microscope. The images are captured in sufficient resolution to retain enough information for effective classification. Histology images of cervical biopsies consist of three major sections; background, stroma and squamous epithelium. Most diagnostic information are contained within the epithelium region. This paper will present two levels of segmentations; global (macro) and local (micro). At the global level the squamous epithelium is separated from the background and stroma. At the local or cellular level, the nuclei and cytoplasm are segmented for further analysis. Image features that influence the pathologists' decision during the analysis and classification of a cervical biopsy are the nuclei's shape and spread; the ratio of the areas of nuclei and cytoplasm as well as the texture and spread of the abnormalities

  5. RETRACTED: Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies.

    PubMed

    Shah, Mayank

    2016-06-01

    At the request of the editorMayank Shah 'Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies' Prosthetics and Orthotics International, published online before print on October 8, 2013 as doi:10.1177/0309364613504779has been retracted. This is because it contains unattributed overlap withK. Subburaj, C. Nair, S. Rajesh, S. M. Meshram, B. Ravi 'Rapid development of auricular prosthesis using CAD and rapid prototyping technologies' International Journal of Oral & Maxillofacial Surgery 2007; 36: 938-943 doi:10.1016/j.ijom.2007.07.013.

  6. Software-Design-Analyzer System

    NASA Technical Reports Server (NTRS)

    Tausworthe, Robert C.

    1991-01-01

    CRISP-90 software-design-analyzer system, update of CRISP-80, is set of computer programs constituting software tool for design and documentation of other software and supporting top-down, hierarchical, modular, structured methodologies for design and programming. Written in Microsoft QuickBasic.

  7. Mars oxygen production system design

    NASA Technical Reports Server (NTRS)

    Cotton, Charles E.; Pillow, Linda K.; Perkinson, Robert C.; Brownlie, R. P.; Chwalowski, P.; Carmona, M. F.; Coopersmith, J. P.; Goff, J. C.; Harvey, L. L.; Kovacs, L. A.

    1989-01-01

    The design and construction phase is summarized of the Mars oxygen demonstration project. The basic hardware required to produce oxygen from simulated Mars atmosphere was assembled and tested. Some design problems still remain with the sample collection and storage system. In addition, design and development of computer compatible data acquisition and control instrumentation is ongoing.

  8. Mars oxygen production system design

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This report summarizes the design and construction of the Mars oxygen demonstration project. The basic hardware required to produce oxygen from simulated Mars atmosphere has been assembled and tested. Some design problems still remain with the sample collection and storage system. In addition, design and development of computer data acquisition and control instrumentation is continuing.

  9. Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

    ERIC Educational Resources Information Center

    Schoolcraft Coll., Livonia, MI.

    This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

  10. eWorkbook: A Computer Aided Assessment System

    ERIC Educational Resources Information Center

    Costagliola, Gennaro; Ferrucci, Filomena; Fuccella, Vittorio; Oliveto, Rocco

    2007-01-01

    Computer aided assessment (CAA) tools are more and more widely adopted in academic environments mixed to other assessment means. In this article, we present a CAA Web application, named eWorkbook, which can be used for evaluating learner's knowledge by creating (the tutor) and taking (the learner) on-line tests based on multiple choice, multiple…

  11. Music and Hearing Aids

    PubMed Central

    Moore, Brian C. J.

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  12. Music and hearing aids.

    PubMed

    Madsen, Sara M K; Moore, Brian C J

    2014-10-31

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems.

  13. Music and hearing aids.

    PubMed

    Madsen, Sara M K; Moore, Brian C J

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  14. User's manual: Computer-aided design programs for inductor-energy-storage dc-to-dc electronic power converters

    NASA Technical Reports Server (NTRS)

    Huffman, S.

    1977-01-01

    Detailed instructions on the use of two computer-aided-design programs for designing the energy storage inductor for single winding and two winding dc to dc converters are provided. Step by step procedures are given to illustrate the formatting of user input data. The procedures are illustrated by eight sample design problems which include the user input and the computer program output.

  15. Evaluation of computer-aided foundation design techniques for fossil fuel power plants. Final report. [Includes list of firms involved, equipment, software, etc

    SciTech Connect

    Kulhawy, F.H.; Dill, J.C.; Trautmann, C.H.

    1984-11-01

    The use of an integrated computer-aided drafting and design system for fossil fuel power plant foundations would offer utilities considerable savings in engineering costs and design time. The technology is available, but research is needed to develop software, a common data base, and data management procedures. An integrated CADD system suitable for designing power plant foundations should include the ability to input, display, and evaluate geologic, geophysical, geotechnical, and survey field data; methods for designing piles, mats, footings, drilled shafts, and other foundation types; and the capability of evaluating various load configurations, soil-structure interactions, and other construction factors that influence design. Although no such integrated system exists, the survey of CADD techniques showed that the technology is available to computerize the whole foundation design process, from single-foundation analysis under single loads to three-dimensional analysis under earthquake loads. The practices of design firms using CADD technology in nonutility applications vary widely. Although all the firms surveyed used computer-aided drafting, only two used computer graphics in routine design procedures, and none had an integrated approach to using CADD for geotechnical engineering. All the firms had developed corporate policies related to system security, supervision, overhead allocation, training, and personnel compensation. A related EPRI project RP2514, is developing guidelines for applying CADD systems to entire generating-plant construction projects. 4 references, 6 figures, 6 tables.

  16. Designing Systems for Environmental Sustainability

    EPA Science Inventory

    Dr. Smith will describe his U.S. EPA research which involves elements of design, from systems as diverse as biofuel supply chains to recycling systems and chemical processes. Design uses models that rate performance as part of a synthesis approach, where steps of analysis and sy...

  17. REC Tracking Systems Design Guide

    SciTech Connect

    Meredith Wingate

    2004-02-03

    OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

  18. Wiring the HIV/AIDS system: building interorganizational infrastructure to link people, sites, and networks.

    PubMed

    Indyk, Debbie; Rier, David A

    2006-01-01

    This paper presents a case example of the new "geometry of care" (Rier and Indyk, this volume), by examining selected examples from five facets of a program developed by the lead author and in operation since 1989. This program is designed to understand, build, revise, and maintain the organizational infrastructure with which to link diverse players and sites, and combine these into a web for producing, assessing, and exchanging the information needed to combat HIV/AIDS. Each example demonstrates how opportunities were exploited for developing and linking resources within and between systems of care and prevention. The program began as an iterative and systems approach to improve access of high-risk, hard-to-reach inner city New York populations to HIV/AIDS services, treatment, and research. The approach is also currently being further elaborated and applied in Argentina and India (see Boylan et al., this volume), and is adaptable to other local and global public health challenges (see Indyk & Rier, this volume).

  19. The use of a spatial information system in the management of HIV/AIDS in South Africa

    PubMed Central

    Busgeeth, Karishma; Rivett, Ulrike

    2004-01-01

    Background South Africa is experiencing an HIV/AIDS pandemic of shattering dimensions. The availability and provision of antiretroviral (ARV) drugs could bring relief to the situation, but the treatment is unfortunately complex with each patient being assigned a different antiretroviral therapy varying in diet-medication regiment. The context of South Africa, its variety of urban and rural settings adds to the challenge of administering and monitoring the HIV+ person throughout the treatment, which will last for the rest of their lives. The lack of physical infrastructure, reliable statistics and adequate resources hinder the efficient management of HIV/AIDS. Results The collection of reliable data will be a first step to assess the status of HIV/AIDS in communities. A number of hospitals have started this process using the conventional approach to collect information about their patients using a paper-based system. Since time is of essence in the fight against the pandemic, data exchange between various hospitals, municipalities and decision-making bodies is becoming more and more important. The logical response to such a need is a computerised system, which will collect and administer HIV/AIDS related information within the local context and allow a monitored access to the data from a number of stakeholders. Conclusions The purpose of this study was to design and develop an HIV/AIDS database, which is embedded in a Spatial Information Management System. The pilot study area is the Gugulethu township in Cape Town where more than 27% of the 325 000 residents are HIV+. It is shown that the implementation of the HIV/AIDS database and the Spatial Information Management System can play a critical role in determining where and when to intervene, improving the quality of care for HIV+ patients, increasing accessibility of service and delivering a cost-effective mode of information. PMID:15239839

  20. Current Status of Computer-Aided Drug Design for Type 2 Diabetes

    PubMed Central

    Bibi, Shabana; Sakata, Katsumi

    2016-01-01

    Background Diabetes is a metabolic disorder that requires multiple therapeutic approaches. The pancreas loses its functionality to properly produce the insulin hormone in patients with diabetes mellitus. In 2012, more than one million people worldwide died as a result of diabetes, which was the eighth leading cause of death. Objective Most drugs currently available and approved by the U.S. Food and Drug Administration cannot reach an adequate level of glycemic control in diabetic patients, and have many side effects; thus, new classes of compounds are required. Efforts based on computer-aided drug design (CADD) can mine a large number of databases to produce new and potent hits and minimize the requirement of time and dollars for new discoveries. Methods Pharmaceutical sciences have made progress with advances in drug design concepts. Virtual screening of large databases is most compatible with different computational methods such as molecular docking, pharmacophore, quantitative structure-activity relationship, and molecular dynamic simulation. Contribution of these methods in selection of antidiabetic compounds has been discussed. Results The Computer-Aided Drug Design (CADD) approach has contributed to successful discovery of novel anti-diabetic agents. This mini-review focuses on CADD approach on currently approved drugs and new therapeutic agents-in-development that may achieve suitable glucose levels and decrease the risk of hypoglycemia, which is a major obstacle to glucose control and a special concern for therapies that increase insulin levels. Conclusion Drug design and development for type 2 diabetes have been actively studied. However, a large number of antidiabetic drugs are still in early stages of development. The conventional target- and structure-based approaches can be regarded as part of the efforts toward therapeutic mechanism-based drug design for treatment of type 2 diabetes. It is expected that further improvement in CADD approach will

  1. Satellite Systems Design/Simulation Environment: A Systems Approach to Pre-Phase A Design

    NASA Technical Reports Server (NTRS)

    Ferebee, Melvin J., Jr.; Troutman, Patrick A.; Monell, Donald W.

    1997-01-01

    A toolset for the rapid development of small satellite systems has been created. The objective of this tool is to support the definition of spacecraft mission concepts to satisfy a given set of mission and instrument requirements. The objective of this report is to provide an introduction to understanding and using the SMALLSAT Model. SMALLSAT is a computer-aided Phase A design and technology evaluation tool for small satellites. SMALLSAT enables satellite designers, mission planners, and technology program managers to observe the likely consequences of their decisions in terms of satellite configuration, non-recurring and recurring cost, and mission life cycle costs and availability statistics. It was developed by Princeton Synergetic, Inc. and User Systems, Inc. as a revision of the previous TECHSAT Phase A design tool, which modeled medium-sized Earth observation satellites. Both TECHSAT and SMALLSAT were developed for NASA.

  2. BAE systems brownout landing aid system technology (BLAST) system overview and flight test results

    NASA Astrophysics Data System (ADS)

    Sykora, Brian

    2012-06-01

    Rotary wing aircraft continue to experience mishaps caused by the loss of visual situational awareness and spatial disorientation due to brownout or whiteout in dusty, sandy or snowy conditions as the downwash of the rotor blades creates obscurant clouds that completely engulf the helicopter during approaches to land. BAE Systems has developed a "see-through" brownout landing aid system technology (BLAST) based on a small and light weight 94GHz radar with proven ability to penetrate dust, coupled with proprietary antenna tracking, signal processing and digital terrain morphing algorithms to produce a cognitive real-time 3D synthetic image of the ground and proximate surface hazards in and around the landing zone. A series of ground and flight tests have been conducted at the United States Army's Yuma Proving Ground in Arizona that reflect operational scenarios in relevant environments to progressively mature the technology. A description of the BLAST solution developed by BAE Systems and results from recent flight tests is provided.

  3. Solar-heating and cooling system design package

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Package of information includes design data, performance specifications, drawings, hazard analysis, and spare parts list for commercially produced system installed in single-family dwelling in Akron, Ohio. System uses air flat-plate collectors, 12000 kg rock storage and backup heat pump. Solar portion requires 0.7 kW, and provides 35% of average total heating load including hot water. Information aids persons considering installing solar home-heating systems.

  4. Computer-aided Molecular Design of Compounds Targeting Histone Modifying Enzymes

    PubMed Central

    Andreoli, Federico; Del Rio, Alberto

    2015-01-01

    Growing evidences show that epigenetic mechanisms play crucial roles in the genesis and progression of many physiopathological processes. As a result, research in epigenetic grew at a fast pace in the last decade. In particular, the study of histone post-translational modifications encountered an extraordinary progression and many modifications have been characterized and associated to fundamental biological processes and pathological conditions. Histone modifications are the catalytic result of a large set of enzyme families that operate covalent modifications on specific residues at the histone tails. Taken together, these modifications elicit a complex and concerted processing that greatly contribute to the chromatin remodeling and may drive different pathological conditions, especially cancer. For this reason, several epigenetic targets are currently under validation for drug discovery purposes and different academic and industrial programs have been already launched to produce the first pre-clinical and clinical outcomes. In this scenario, computer-aided molecular design techniques are offering important tools, mainly as a consequence of the increasing structural information available for these targets. In this mini-review we will briefly discuss the most common types of known histone modifications and the corresponding operating enzymes by emphasizing the computer-aided molecular design approaches that can be of use to speed-up the efforts to generate new pharmaceutically relevant compounds. PMID:26082827

  5. Computer-aided Molecular Design of Compounds Targeting Histone Modifying Enzymes.

    PubMed

    Andreoli, Federico; Del Rio, Alberto

    2015-01-01

    Growing evidences show that epigenetic mechanisms play crucial roles in the genesis and progression of many physiopathological processes. As a result, research in epigenetic grew at a fast pace in the last decade. In particular, the study of histone post-translational modifications encountered an extraordinary progression and many modifications have been characterized and associated to fundamental biological processes and pathological conditions. Histone modifications are the catalytic result of a large set of enzyme families that operate covalent modifications on specific residues at the histone tails. Taken together, these modifications elicit a complex and concerted processing that greatly contribute to the chromatin remodeling and may drive different pathological conditions, especially cancer. For this reason, several epigenetic targets are currently under validation for drug discovery purposes and different academic and industrial programs have been already launched to produce the first pre-clinical and clinical outcomes. In this scenario, computer-aided molecular design techniques are offering important tools, mainly as a consequence of the increasing structural information available for these targets. In this mini-review we will briefly discuss the most common types of known histone modifications and the corresponding operating enzymes by emphasizing the computer-aided molecular design approaches that can be of use to speed-up the efforts to generate new pharmaceutically relevant compounds.

  6. LIFESPAN: A tool for the computer-aided design of longitudinal studies

    PubMed Central

    Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

    2015-01-01

    Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

  7. Computer aided design and manufacturing of composite propfan blades for a cruise missile wind tunnel model

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.; Downey, Kevin M.

    1992-01-01

    One of the propulsion concepts being investigated for future cruise missiles is advanced unducted propfans. To support the evaluation of this technology applied to the cruise missile, a joint DOD and NASA test project was conducted to design and then test the characteristics of the propfans on a 0.55-scale, cruise missile model in a NASA wind tunnel. The configuration selected for study is a counterrotating rearward swept propfan. The forward blade row, having six blades, rotates in a counterclockwise direction, and the aft blade row, having six blades, rotates in a clockwise direction, as viewed from aft of the test model. Figures show the overall cruise missile and propfan blade configurations. The objective of this test was to evaluate propfan performance and suitability as a viable propulsion option for next generation of cruise missiles. This paper details the concurrent computer aided design, engineering, and manufacturing of the carbon fiber/epoxy propfan blades as the NASA Lewis Research Center.

  8. Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin

    PubMed Central

    Roperto, Renato; Akkus, Anna; Akkus, Ozan; Lang, Lisa; Sousa-Neto, Manoel Damiao; Teich, Sorin; Porto, Thiago Soares

    2016-01-01

    Background: The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies. Materials and Methods: In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level. Results: Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used. Conclusion: Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used. PMID:27076825

  9. An Information Systems Approach to the Intervention and Prevention of AIDS.

    ERIC Educational Resources Information Center

    Xu, Li D.; Li, Ling X.

    1992-01-01

    Provides a conceptual framework for information systems (IS) that can be used in AIDS intervention and prevention (AIP). System components are analyzed, including a database, decision support systems (DSS), expert systems, and software; potential applications of ISAIP are suggested; and an example of a system implemented at Wright State University…

  10. Launch vehicle systems design analysis

    NASA Technical Reports Server (NTRS)

    Ryan, Robert; Verderaime, V.

    1993-01-01

    Current launch vehicle design emphasis is on low life-cycle cost. This paper applies total quality management (TQM) principles to a conventional systems design analysis process to provide low-cost, high-reliability designs. Suggested TQM techniques include Steward's systems information flow matrix method, quality leverage principle, quality through robustness and function deployment, Pareto's principle, Pugh's selection and enhancement criteria, and other design process procedures. TQM quality performance at least-cost can be realized through competent concurrent engineering teams and brilliance of their technical leadership.

  11. A PC-aided optical foetal heart rate detection system.

    PubMed

    Oweis, Rami J; As'ad, Hala; Aldarawsheh, Amany; Al-Khdeirat, Rawan; Lwissy, Kaldoun

    2014-01-01

    Safe monitoring of foetal heart rate is a valuable tool for the healthy evolution and wellbeing of both foetus and mother. This paper presents a non-invasive optical technique that allows for foetal heart rate detection using a photovoltaic infrared (IR) detector placed on the mother's abdomen. The system presented here consists of a photoplethysmography (PPG) circuit, abdomen circuit and a personal computer equipped with MATLAB. A near IR beam having a wavelength of 880 nm is transmitted through the mother's abdomen and foetal tissue. The received abdominal signal that conveys information pertaining to the mother and foetal heart rate is sensed by a low noise photodetector. The PC receives the signal through the National Instrumentation Data Acquisition Card (NIDAQ). After synchronous detection of the abdominal and finger PPG signals, the designed MATLAB-based software saves, analyses and extracts information related to the foetal heart rate. Extraction is carried out using recursive least squares adaptive filtration. Measurements on eight pregnant women with gestational periods ranging from 35-39 weeks were performed using the proposed system and CTG. Results show a correlation coefficient of 0.978 and a correlation confidence interval between 88-99.6%. The t test results in a p value of 0.034, which is less than 0.05. Low power, low cost, high signal-to-noise ratio, reduction of ambient light effect and ease of use are the main characteristics of the proposed system. PMID:24195701

  12. Using the Continuum of Design Modelling Techniques to Aid the Development of CAD Modeling Skills in First Year Industrial Design Students

    ERIC Educational Resources Information Center

    Storer, I. J.; Campbell, R. I.

    2012-01-01

    Industrial Designers need to understand and command a number of modelling techniques to communicate their ideas to themselves and others. Verbal explanations, sketches, engineering drawings, computer aided design (CAD) models and physical prototypes are the most commonly used communication techniques. Within design, unlike some disciplines,…

  13. Hardware Developments; Microcomputers and Processors; Grade School/High School Instructional; and Computer-Aided Design. Papers Presented at the Association for Educational Data Systems Annual Convention (Phoenix, Arizona, May 3-7, 1976).

    ERIC Educational Resources Information Center

    Association for Educational Data Systems, Washington, DC.

    Compiled are ten papers describing computer hardware and computer use in elementary and secondary school instruction presented at the Association for Educational Data Systems (AEDS) 1976 convention. An oral/aural terminal is described followed by two papers about the use of minicomputers and microprocessors. Seven papers discuss various uses of…

  14. NASA System Engineering Design Process

    NASA Technical Reports Server (NTRS)

    Roman, Jose

    2011-01-01

    This slide presentation reviews NASA's use of systems engineering for the complete life cycle of a project. Systems engineering is a methodical, disciplined approach for the design, realization, technical management, operations, and retirement of a system. Each phase of a NASA project is terminated with a Key decision point (KDP), which is supported by major reviews.

  15. Computer-Aided Molecular Design of Bis-phosphine Oxide Lanthanide Extractants

    DOE PAGES

    McCann, Billy W.; Silva, Nuwan De; Windus, Theresa L.; Gordon, Mark S.; Moyer, Bruce A.; Bryantsev, Vyacheslav S.; Hay, Benjamin P.

    2016-02-17

    Computer-aided molecular design and high-throughput screening of viable host architectures can significantly reduce the efforts in the design of novel ligands for efficient extraction of rare earth elements. This paper presents a computational approach to the deliberate design of bis-phosphine oxide host architectures that are structurally organized for complexation of trivalent lanthanides. Molecule building software, HostDesigner, was interfaced with molecular mechanics software, PCModel, providing a tool for generating and screening millions of potential R2(O)P-link-P(O)R2 ligand geometries. The molecular mechanics ranking of ligand structures is consistent with both the solution-phase free energies of complexation obtained with density functional theory and themore » performance of known bis-phosphine oxide extractants. For the case where link is -CH2-, evaluation of the ligand geometry provides the first characterization of a steric origin for the ‘anomalous aryl strengthening’ effect. The design approach has identified a number of novel bis-phosphine oxide ligands that are better organized for lanthanide complexation than previously studied examples.« less

  16. Computer-Aided Molecular Design of Bis-phosphine Oxide Lanthanide Extractants.

    PubMed

    McCann, Billy W; Silva, Nuwan De; Windus, Theresa L; Gordon, Mark S; Moyer, Bruce A; Bryantsev, Vyacheslav S; Hay, Benjamin P

    2016-06-20

    Computer-aided molecular design and high-throughput screening of viable host architectures can significantly reduce the efforts in the design of novel ligands for efficient extraction of rare earth elements. This paper presents a computational approach to the deliberate design of bis-phosphine oxide host architectures that are structurally organized for complexation of trivalent lanthanides. Molecule building software, HostDesigner, was interfaced with molecular mechanics software, PCModel, providing a tool for generating and screening millions of potential R2(O)P-link-P(O)R2 ligand geometries. The molecular mechanics ranking of ligand structures is consistent with both the solution-phase free energies of complexation obtained with density functional theory and the performance of known bis-phosphine oxide extractants. For the case where the link is -CH2-, evaluation of the ligand geometry provides the first characterization of a steric origin for the "anomalous aryl strengthening" effect. The design approach has identified a number of novel bis-phosphine oxide ligands that are better organized for lanthanide complexation than previously studied examples.

  17. The Servicing Aid Tool. [teleoperated manipulation system for space shuttle orbiters

    NASA Technical Reports Server (NTRS)

    Pullen, John L.; Keksz, William O.; Manson, Thomas J.; Martin, David; Werneth, Russel

    1992-01-01

    The Servicing Aid Tool (SAT) is a teleoperated manipulation system designed for use on the NSTS Orbiter. The system will assist EVA servicing of spacecraft such as the Hubble Space Telescope and Explorer platform. SAT components are spaceflight adaptations of existing ground-based designs from Robotics Research and Schilling Development. Fairchild Space is providing the control electronics, safety system, and flight integration. The manipulator consists of a 6-DOF Slave Arm mounted on a 1-DOF Positioning Link in the Payload Bay. The Slave Arm is controlled via a highly similar, 6-DOF, force-reflecting Master Arm. Each slave arm joint receives position commands from the corresponding master arm joint; torque commands are reflected to each master joint based on the current state of the slave joint and the master/slave relationship. Scaled and indexed control will be accommodated, as will various features to ensure safe operation. The paper will focus on the development of the safety system, and operations for the demonstration and servicing missions.

  18. Space Station Freedom external fluid utilities system design and integration

    NASA Astrophysics Data System (ADS)

    Reinhard, Dawn M.

    1993-02-01

    This paper presents the current Space Station Freedom External Fluid System Design, which is an integrated design of numerous criteria, such as safety, reliability, availability, manufacturability, commonality and compatibility with Extravehicular Activity (EVA). McDonnell Douglas engineers are working to meet a Critical Design Review (CDR) in 1993 and to begin production of fluid system hardware for first launch in 1996, with successive launches continuing through the decade. The fluid system design hardware, such as the 316L Stainless Steel tubing, Inconel, flexible metal hoses, tee fittings, clamping systems and quick disconnect couplings will be presented, with special emphasis on how they were selected in the early phases of the design process. Fabrication and assembly of the Space Station Freedom fluid utility system, using the Numerically Controlled (NC) tube bender and Orbital Welder will be discussed. The Extravehicular Activity (EVA) on-orbit assembly and maintenance techniques of this system will also be briefly explained. Recommendations which have contributed to the success of this design effort include: Consistent communications between groups. a centralized computer-aided drafting/Computer-aided manufacturing (CAD/CAM) system with Electronic Development Fixture (EDF) capability, and technical review boards to control and minimize changes to the design baseline.

  19. Global HIV/AIDS funding and health systems: Searching for the win-win.

    PubMed

    Levine, Ruth; Oomman, Nandini

    2009-11-01

    Donors, developing country governments, and NGOs are searching for ways to use funding for HIV/AIDS programs that strengthen the functioning of weak health systems. This is motivated both by the realization that a large share of donor funding for global health is and will continue to be dedicated to HIV/AIDS, and that the aims of more and better treatment, prevention, and care can be achieved only with attention to systemic capacities. For AIDS resources to strengthen health systems, decision makers should: (a) mitigate the risks that AIDS spending may weaken the ability of health systems to respond to other health problems; (b) find ways for procurement, supply chain, management information, and other systems that are created to support AIDS treatment to be broadened to serve other types of services; and (c) build upon the ways in which AIDS programs have overcome some demand-side barriers to use of services. In pursuing this agenda, donors should recognize that health system development is a function of the national and local political economy and place respect for national sovereignty as a central tenet of their policies and practices. PMID:19858934

  20. Computer-aided design of curved surfaces with automatic model generation

    NASA Technical Reports Server (NTRS)

    Staley, S. M.; Jerard, R. B.; White, P. R.

    1980-01-01

    The design and visualization of three-dimensional objects with curved surfaces have always been difficult. The paper given below describes a computer system which facilitates both the design and visualization of such surfaces. The system enhances the design of these surfaces by virtue of various interactive techniques coupled with the application of B-Spline theory. Visualization is facilitated by including a specially built model-making machine which produces three-dimensional foam models. Thus, the system permits the designer to produce an inexpensive model of the object which is suitable for evaluation and presentation.

  1. An overlooked yet ubiquitous fluoride congenitor: binding bifluoride in triazolophanes using computer-aided design.

    PubMed

    Ramabhadran, Raghunath O; Liu, Yun; Hua, Yuran; Ciardi, Moira; Flood, Amar H; Raghavachari, Krishnan

    2014-04-01

    Despite its ubiquity during the binding and sensing of fluoride, the role of bifluoride (HF2(-)) and its binding properties are almost always overlooked. Here, we give one of the first examinations of bifluoride recognition in which we use computer-aided design to modify the cavity shape of triazolophanes to better match with HF2(-). Computational investigation indicates that HF2(-) and Cl(-) should have similar binding affinities to the parent triazolophane in the gas phase. Evaluation of the binding geometries revealed a preference for binding of the linear HF2(-) along the north-south axis with a smaller Boltzmann weighted population aligned east-west and all states being accessed rapidly through in-plane precessional rotations of the anion. While the (1)H NMR spectroscopy studies are consistent with the calculated structural aspects, binding affinities in solution were determined to be significantly smaller for the bifluoride than the chloride. Computed geometries suggested that a 20° tilting of the bifluoride (stemming from the cavity size) could account for the 25-fold difference between the two binding affinities, HF2(-) < Cl(-). Structural variations to the triazolophane's geometry and electronic modifications to the network of hydrogen bond donors were subsequently screened in a stepwise manner using density functional theory calculations to yield a final design that eliminates the tilting. Correspondingly, the bifluoride's binding affinity (K ∼ 10(6) M(-1)) increased and was also found to remain equal to chloride in the gas and solution phases. The new oblate cavity appeared to hold the HF2(-) in a single east-west arrangement. Our findings demonstrate the promising ability of computer-aided design to fine-tune the structural and electronic match in anion receptors as a means to control the arrangement and binding strength of a desired guest.

  2. Nanoscale control designs for systems.

    PubMed

    Chen, Yung-Yue

    2014-02-01

    Nanoscale control is the science of the control of objects at dimensions with 100 nm or less and the manipulation of them at this level of precision. The desired attributes of systems under nanoscale control design are extreme high resolution, accuracy, stability, and fast response. An important perspective of investigation in nanoscale control design includes system modeling and precision control devices and materials at a nanoscale dimension, i.e., design of nanopositioners. Nanopositioners are mechatronic systems with an ultraprecise resolution down to a fraction of an atomic diameter and developed to move objects over a small range in nanoscale dimension. After reviewing a lot of existing literatures for nanoscale control designs, the way to successful nanoscale control is accurate position sensing and feedback control of the motion. An overview of nanoscale identification, linear, and nonlinear control technologies, and devices that are playing a key role in improving precision, accuracy, and response of operation of these systems are introduced in this research.

  3. Design of Knight LED system

    NASA Astrophysics Data System (ADS)

    Zheng, Wen; Lou, Yuna; Xiao, Zhihong

    2010-02-01

    This design introduces a used car on the design of LED decorative light strip. This LED named Knight LED. In This system we use ATMEGA8 as the Master MCU Chip. Through the microcontroller to implement the wireless remote control receiver and the LED lights of different modes of switching, different brightness control. Also we use ULN2803 as the LED driver.

  4. Designing modern furnace cooling systems

    NASA Astrophysics Data System (ADS)

    Merry, J.; Sarvinis, J.; Voermann, N.

    2000-02-01

    An integrated multidisciplinary approach to furnace design that considers the interdependence between furnace cooling elements and other furnace systems, such as binding, cooling water, and instrumentation, is necessary to achieve maximum furnace production and a long refractory life. The retrofit of the BHP Hartley electric furnace and the Kidd Creek copper converting furnace are successful examples of an integrated approach to furnace cooling design.

  5. Digital systems design language. Design synthesis of digital systems

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1979-01-01

    The Digital Systems Design Language (DDL) is implemented on the SEL-32 computer systems. The details of the language, translator and simulator programs are included. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

  6. A framework for development of an intelligent system for design and manufacturing of stamping dies

    NASA Astrophysics Data System (ADS)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  7. Computer-Aided Modelling and Analysis of PV Systems: A Comparative Study

    PubMed Central

    Koukouvaos, Charalambos

    2014-01-01

    Modern scientific advances have enabled remarkable efficacy for photovoltaic systems with regard to the exploitation of solar energy, boosting them into having a rapidly growing position among the systems developed for the production of renewable energy. However, in many cases the design, analysis, and control of photovoltaic systems are tasks which are quite complex and thus difficult to be carried out. In order to cope with this kind of problems, appropriate software tools have been developed either as standalone products or parts of general purpose software platforms used to model and simulate the generation, transmission, and distribution of solar energy. The utilization of this kind of software tools may be extremely helpful to the successful performance evaluation of energy systems with maximum accuracy and minimum cost in time and effort. The work presented in this paper aims on a first level at the performance analysis of various configurations of photovoltaic systems through computer-aided modelling. On a second level, it provides a comparative evaluation of the credibility of two of the most advanced graphical programming environments, namely, Simulink and LabVIEW, with regard to their application in photovoltaic systems. PMID:24772007

  8. Computer-aided modelling and analysis of PV systems: a comparative study.

    PubMed

    Koukouvaos, Charalambos; Kandris, Dionisis; Samarakou, Maria

    2014-01-01

    Modern scientific advances have enabled remarkable efficacy for photovoltaic systems with regard to the exploitation of solar energy, boosting them into having a rapidly growing position among the systems developed for the production of renewable energy. However, in many cases the design, analysis, and control of photovoltaic systems are tasks which are quite complex and thus difficult to be carried out. In order to cope with this kind of problems, appropriate software tools have been developed either as standalone products or parts of general purpose software platforms used to model and simulate the generation, transmission, and distribution of solar energy. The utilization of this kind of software tools may be extremely helpful to the successful performance evaluation of energy systems with maximum accuracy and minimum cost in time and effort. The work presented in this paper aims on a first level at the performance analysis of various configurations of photovoltaic systems through computer-aided modelling. On a second level, it provides a comparative evaluation of the credibility of two of the most advanced graphical programming environments, namely, Simulink and LabVIEW, with regard to their application in photovoltaic systems.

  9. The role and application of data base management in integrated computer-aided design

    NASA Technical Reports Server (NTRS)

    Blackburn, C. L.; Storaasli, O. O.; Fulton, R. E.

    1982-01-01

    The need to marshal the extensive data that figure in design problems is underlined. An approach to managing engineering data for use in a computerized integrated design system is described. The approach is embodied in an experimental integrated software system that is used to demonstrate and evaluate such data management functions as storage, retrieval, query, manipulation, and modification. The development and organization of the experimental integrated design system and the application of the system to selected test problems are discussed, together with insights into data management issues gained from the study.

  10. Opportunities for Russian Nuclear Weapons Institute developing computer-aided design programs for pharmaceutical drug discovery. Final report

    SciTech Connect

    1996-09-23

    The goal of this study is to determine whether physicists at the Russian Nuclear Weapons Institute can profitably service the need for computer aided drug design (CADD) programs. The Russian physicists` primary competitive advantage is their ability to write particularly efficient code able to work with limited computing power; a history of working with very large, complex modeling systems; an extensive knowledge of physics and mathematics, and price competitiveness. Their primary competitive disadvantage is their lack of biology, and cultural and geographic issues. The first phase of the study focused on defining the competitive landscape, primarily through interviews with and literature searches on the key providers of CADD software. The second phase focused on users of CADD technology to determine deficiencies in the current product offerings, to understand what product they most desired, and to define the potential demand for such a product.

  11. Computer graphics application in the engineering design integration system

    NASA Technical Reports Server (NTRS)

    Glatt, C. R.; Abel, R. W.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Stewart, W. A.

    1975-01-01

    The computer graphics aspect of the Engineering Design Integration (EDIN) system and its application to design problems were discussed. Three basic types of computer graphics may be used with the EDIN system for the evaluation of aerospace vehicles preliminary designs: offline graphics systems using vellum-inking or photographic processes, online graphics systems characterized by direct coupled low cost storage tube terminals with limited interactive capabilities, and a minicomputer based refresh terminal offering highly interactive capabilities. The offline line systems are characterized by high quality (resolution better than 0.254 mm) and slow turnaround (one to four days). The online systems are characterized by low cost, instant visualization of the computer results, slow line speed (300 BAUD), poor hard copy, and the early limitations on vector graphic input capabilities. The recent acquisition of the Adage 330 Graphic Display system has greatly enhanced the potential for interactive computer aided design.

  12. Systems design and comparative analysis of large antenna concepts

    NASA Technical Reports Server (NTRS)

    Garrett, L. B.; Ferebee, M. J., Jr.

    1983-01-01

    Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

  13. UWB Tracking System Design with TDOA Algorithm

    NASA Technical Reports Server (NTRS)

    Ni, Jianjun; Arndt, Dickey; Ngo, Phong; Phan, Chau; Gross, Julia; Dusl, John; Schwing, Alan

    2006-01-01

    This presentation discusses an ultra-wideband (UWB) tracking system design effort using a tracking algorithm TDOA (Time Difference of Arrival). UWB technology is exploited to implement the tracking system due to its properties, such as high data rate, fine time resolution, and low power spectral density. A system design using commercially available UWB products is proposed. A two-stage weighted least square method is chosen to solve the TDOA non-linear equations. Matlab simulations in both two-dimensional space and three-dimensional space show that the tracking algorithm can achieve fine tracking resolution with low noise TDOA data. The error analysis reveals various ways to improve the tracking resolution. Lab experiments demonstrate the UWBTDOA tracking capability with fine resolution. This research effort is motivated by a prototype development project Mini-AERCam (Autonomous Extra-vehicular Robotic Camera), a free-flying video camera system under development at NASA Johnson Space Center for aid in surveillance around the International Space Station (ISS).

  14. GPS aiding of ocean current determination. [Global Positioning System

    NASA Technical Reports Server (NTRS)

    Mohan, S. N.

    1981-01-01

    The navigational accuracy of an oceangoing vessel using conventional GPS p-code data is examined. The GPS signal is transmitted over two carrier frequencies in the L-band at 1575.42 and 1227.6 MHz. Achievable navigational uncertainties of differenced positional estimates are presented as a function of the parameters of the problem, with particular attention given to the effect of sea-state, user equivalent range error, uncompensated antenna motion, varying delay intervals, and reduced data rate examined in the unaided mode. The unmodeled errors resulting from satellite ephemeris uncertainties are shown to be negligible for the GPS-NDS (Navigation Development) satellites. Requirements are met in relatively calm seas, but accuracy degradation by a factor of at least 2 must be anticipated in heavier sea states. The aided mode of operation is examined, and it is shown that requirements can be met by using an inertial measurement unit (IMU) to aid the GPS receiver operation. Since the use of an IMU would mean higher costs, direct Doppler from the GPS satellites is presented as a viable alternative.

  15. Interactive computer aided technology, evolution in the design/manufacturing process

    NASA Technical Reports Server (NTRS)

    English, C. H.

    1975-01-01

    A powerful computer-operated three dimensional graphic system and associated auxiliary computer equipment used in advanced design, production design, and manufacturing was described. This system has made these activities more productive than when using older and more conventional methods to design and build aerospace vehicles. With the use of this graphic system, designers are now able to define parts using a wide variety of geometric entities, define parts as fully surface 3-dimensional models as well as "wire-frame" models. Once geometrically defined, the designer is able to take section cuts of the surfaced model and automatically determine all of the section properties of the planar cut, lightpen detect all of the surface patches and automatically determine the volume and weight of the part. Further, his designs are defined mathematically at a degree of accuracy never before achievable.

  16. Computer-aided test equipment graphics system (CATEGS). Final report

    SciTech Connect

    Fuller, W.

    1993-09-01

    This development effort evaluated existing CAD and emerging CAE technologies for implementing automated processes applicable to the design, documentation, fabrication, and maintenance of electrical test equipment. By developing designs in an electronic media and electronically moving those designs, a 2-to-1 productivity improvement was achieved over previous methods. Users and customers further identified value-added benefits of faster development of designs and improved quality of the definitions produced.

  17. Design and operations technologies - Integrating the pieces. [for future space systems design

    NASA Technical Reports Server (NTRS)

    Eldred, C. H.

    1979-01-01

    As major elements of life-cycle costs (LCC) having critical impacts on the initiation and utilization of future space programs, the areas of vehicle design and operations are reviewed in order to identify technology requirements. Common to both areas is the requirement for efficient integration of broad, complex systems. Operations technologies focus on the extension of space-based capabilities and cost reduction through the combination of innovative design, low-maintenance hardware, and increased manpower productivity. Design technologies focus on computer-aided techniques which increase productivity while maintaining a high degree of flexibility which enhances creativity and permits graceful design changes.

  18. Prospective on multiscale simulation of virus-like particles: Application to computer-aided vaccine design.

    PubMed

    Abi Mansour, Andrew; Sereda, Yuriy V; Yang, Jing; Ortoleva, Peter J

    2015-11-01

    Simulations of virus-like particles needed for computer-aided vaccine design highlight the need for new algorithms that accelerate molecular dynamics. Such simulations via conventional molecular dynamics present a practical challenge due to the millions of atoms involved and the long timescales of the phenomena of interest. These phenomena include structural transitions, self-assembly, and interaction with a cell surface. A promising approach for addressing this challenge is multiscale factorization. The approach is distinct from coarse-graining techniques in that it (1) avoids the need for conjecturing phenomenological governing equations for coarse-grained variables, (2) provides simulations with atomic resolution, (3) captures the cross-talk between disturbances at the atomic and the whole virus-like particle scale, and (4) achieves significant speedup over molecular dynamics. A brief review of multiscale factorization method is provided, as is a prospective on its development.

  19. Molecular structure descriptors in the computer-aided design of biologically active compounds

    NASA Astrophysics Data System (ADS)

    Raevsky, Oleg A.

    1999-06-01

    The current state of description of molecular structure in computer-aided molecular design of biologically active compounds by means of descriptors is analysed. The information contents of descriptors increases in the following sequence: element-level descriptors-structural formulae descriptors-electronic structure descriptors-molecular shape descriptors-intermolecular interaction descriptors. Each subsequent class of descriptors normally covers information contained in the previous-level ones. It is emphasised that it is practically impossible to describe all the features of a molecular structure in terms of any single class of descriptors. It is recommended to optimise the number of descriptors used by means of appropriate statistical procedures and characteristics of structure-property models based on these descriptors. The bibliography includes 371 references.

  20. Alzheimer's disease drug development based on Computer-Aided Drug Design.

    PubMed

    Zeng, Huahui; Wu, Xiangxiang

    2016-10-01

    Alzheimer's disease (AD) is a common neurodegenerative disorder characterized by the excessive deposition of amyloids in the brain. The pathological features mainly include the extracellular amyloid plaques and intracellular neurofibrillary tangles, which are the production of amyloid precursor protein (APP) processed by the α-, β- and γ-secretases. Based on the amyloid cascade hypotheses of AD, a large number of amyloid-β agents and secretase inhibitors against AD have been recently developed by using computational methods. This review article describes pathophysiology of AD and the structure of the Aβ plaques, β- and γ-secretases, and discusses the recent advances in the development of the amyloid agents for AD therapy and diagnosis by using Computer-Aided Drug Design approach.